WorldWideScience

Sample records for angren industrial area

  1. Contemporary technology of enrichment of Angren deposit of kaolins. I. Using a ultrasonic dispersion for shallowing of raw materials

    International Nuclear Information System (INIS)

    Krivorotov, V.F.; Usmanov, Zh.M.; Fridman, A.A.

    2012-01-01

    Optimal parameters of ultrasonic dispersion at enrichment of Angren kaolins are presented. It has been stated that the granule sizes of the kaolin-powder produced by this technology are 0.15-4.0 μm, and 75% of particles have sizes 0.15-1.5 μm. The whiteness of the kaolin-powder amounts 80 - 82%. (authors)

  2. Contemporary technology of enrichment of kaolins of Angren deposit. II. Removal of impurities and whitening of kaolins: using electrophysical and chemical methods of cleaning

    International Nuclear Information System (INIS)

    Krivorotov, V.F.; Usmanov, ZH.M.; Fridman, A.A.

    2012-01-01

    The contemporary methods of enrichment of Angren kaolins have been described. The electrophoresis and chemical whitening are demonstrated to be the most effective methods of scavenging. Application of ultrasonic dispersion, electrophoresis and chemical whitening methods allows one to obtain kaolin with whiteness ≅ 88% and content of iron oxides ≅ 0.4%. Using such kaolin as a sorbent at de coloration of plant oil have been shown good adsorption properties, meeting the level of world-wide standards for such class of materials. (authors)

  3. Landslide Hazard Assessment In Mountaneous Area of Uzbekistan

    Science.gov (United States)

    Nyazov, R. A.; Nurtaev, B. S.

    Because of the growth of population and caretaking of the flat areas under agricul- ture, mountain areas have been intensively mastered, producing increase of natural and technogenic processes in Uzbekistan last years. The landslides are the most dan- gerous phenomena and 7240 of them happened during last 40 years. More than 50 % has taken place in the term of 1991 - 2000 years. The situation is aggravated be- cause these regions are situated in zones, where disastrous earthquakes with M> 7 occurred in past and are expected in the future. Continuing seismic gap in Uzbek- istan during last 15-20 years and last disastrous earthquakes occurred in Afghanistan, Iran, Turkey, Greece, Taiwan and India worry us. On the basis of long-term observa- tions the criteria of landslide hazard assessment (suddenness, displacement interval, straight-line directivity, kind of residential buildings destruction) are proposed. This methodology was developed on two geographic levels: local (town scale) and regional (region scale). Detailed risk analysis performed on a local scale and extrapolated to the regional scale. Engineering-geologic parameters content of hazard estimation of landslides and mud flows also is divided into regional and local levels. Four degrees of danger of sliding processes are distinguished for compiling of small-scale, medium- and large-scale maps. Angren industrial area in Tien-Shan mountain is characterized by initial seismic intensity of 8-9 (MSC scale). Here the human technological activity (open-cast mining) has initiated the forming of the large landslide that covers more- over 8 square kilometers and corresponds to a volume of 800 billion cubic meters. In turn the landslide influence can become the source of industrial emergencies. On an example of Angren industrial mining region, the different scenarios on safety control of residing of the people and motion of transport, regulating technologies definition of field improvement and exploitation of mountain

  4. Construction and modernization of underground and surface mines. [USSR

    Energy Technology Data Exchange (ETDEWEB)

    Burshtein, N M

    1983-12-01

    Development of the Sredazugol' association in Soviet Central Asia from 1976 to 1985 is discussed. From 1976 to 1980 investment in the association amounted to 151 million rubles, 87.5 million of which fell on construction. Major development projects of the 1976-1980 period are reviewed: construction of new mining levels in underground coal mines, development of a number of operating surface mines, modernization of earthmoving and mining equipment, development of mine haulage by locomotives and railroad cars, improving occupational safety in coal mining, increasing slope stability in surface mining, especially in the area of the Atchinsk landslide in the Angren mine. From 1981 to 1985 investment in the Sredazugol' association should amount to 202 million rubles, of which 126 million rubles will be spent on construction. Investment will be 35% higher than in the 1976-1980 period and investment in mine construction 43% higher. The largest development project will be modernization of the Angren surface mine and increasing its targeted coal output from 5.2 Mt/y to 10.3 Mt/y by 1990. Modernization and reconstruction of the Angren mine will be carried out in 2 stages. Coal output of the mine will increase by 1.2 Mt/y in the current 5 year plan (by 1985), and by 3.9 Mt/y in the next 5 year period. Reconstruction and development of the Angren mine will cost approximately 254 million rubles. Mining and earthmoving equipment which will be used in the Angren mine is reviewed: EhRGV-630 bucket wheel excavators, EhSh-10/70 and EhSh-13/50 walking draglines, etc.

  5. Assessment of industrial liquid waste management in Omdurman Industrial Area

    International Nuclear Information System (INIS)

    Elnasri, R. A. A.

    2003-04-01

    This study was conducted mainly to investigate the effects of industrial liquid waste on the environment in the Omdurman area. Various types of industries are found around Omdurman. According to the ISC the major industries are divided into eight major sub-sectors, each sub-sector is divided into types of industries. Special consideration was given to the liquid waste because of its effects. In addition to the available data, personal observation supported by photographs, laboratory analyses were carried on the industrial effluents. The investigated parameters in the analysis were, BOD, COD, O and G, Cr, TDS, TSS, pH, temp and conductivity. Interviews were conducted with waste handling workers in the industries, in order to assess the effects of industrial pollution. The results obtained showed that pollutants produced by all the factories were found to exceed the accepted levels of the industrial pollution control. The effluents disposed of in the sites allotted by municipal authorities have adverse effects on the surrounding environment and public health and amenities. Accordingly the study recommends that the waste water must be pretreated before being disposed of in site allotted by municipal authorities. Develop an appropriate system for industrial waste proper management. The study established the need to construct a sewage system in the area in order to minimize the pollutants from effluents. (Author)

  6. Assessment of industrial liquid waste management in Omdurman Industrial Area

    Energy Technology Data Exchange (ETDEWEB)

    Elnasri, R A. A. [Institute of Environmental Studies, University of Khartoum, Khartoum (Sudan)

    2003-04-15

    This study was conducted mainly to investigate the effects of industrial liquid waste on the environment in the Omdurman area. Various types of industries are found around Omdurman. According to the ISC the major industries are divided into eight major sub-sectors, each sub-sector is divided into types of industries. Special consideration was given to the liquid waste because of its effects. In addition to the available data, personal observation supported by photographs, laboratory analyses were carried on the industrial effluents. The investigated parameters in the analysis were, BOD, COD, O and G, Cr, TDS, TSS, pH, temp and conductivity. Interviews were conducted with waste handling workers in the industries, in order to assess the effects of industrial pollution. The results obtained showed that pollutants produced by all the factories were found to exceed the accepted levels of the industrial pollution control. The effluents disposed of in the sites allotted by municipal authorities have adverse effects on the surrounding environment and public health and amenities. Accordingly the study recommends that the waste water must be pretreated before being disposed of in site allotted by municipal authorities. Develop an appropriate system for industrial waste proper management. The study established the need to construct a sewage system in the area in order to minimize the pollutants from effluents. (Author)

  7. Industrial pollutions is an environmental issue of Karachi urban area

    International Nuclear Information System (INIS)

    Jokhio, M.H.; Abro, M.I.; Essani, A.

    2005-01-01

    The Industrial pollution is one of the serious Environmental issues of the Karachi urban area, categorized as air pollution and water pollution. The localization more the 6000 industries in Karachi urban area at four different sites of Sindh industrial trading estate, Landhi industrial trading estate, Korangi industrial area west Warf industrials, Port Qasim industrial. Area and Hub industrial are near Karachi city. The major iron and steel industries includes Pakistan steel mills and its allied industries at Bin Qasim more than 100 re-rolling industries are located at site area. Karachi ship yard engineering works, Peoples steel Mill, automobile industries and various manufacturing industries which requires metal and its alloy in manufacturing of product mostly located at Bin Qasim, Korangi, and Shershah site areas. None of the industrial sector contain the waster treatment or recycling plant. The ill planted growth of Karachi and its industries caused the environmental degradation of the city and its coastal areas complete with massive mangrove destruction, air water, fishing, and agriculture possessing a potential threat to the lives of more than 10 million citizens. The environmental issues of the metal related industries include the scrap, waste and pollution. Scrapes am waste of the metal industries can be reused in other manufacturing of engineering materials or recycled to produce the new material. However the pollution is the one of the major environmental issue related with the metal industries which need the considerable research and development work in order to over come the serve environmental issues of the urban areas. This article reviews and identifies the level of industrial pollution emphasized on metal related industries of the Karachi urban areas. (author)

  8. Industrial Area Redevelopment In The Netherlands: Search For New Approaches

    NARCIS (Netherlands)

    Blokhuis, E.G.J.; Schaefer, W.F.; Albrechts, L.

    2007-01-01

    Industrial areas in the Netherlands are important for a sustainable economic growth. However, the market for industrial areas faces several problems. A main problem is the obsolescence of largely 30% of the current stock of industrial areas. The redevelopment of these obsolete industrial areas

  9. Performance evaluation of the conventional Brazilian industries radiation protection in the small industrial gauges and industrial radiography areas

    International Nuclear Information System (INIS)

    Santos, Joyra Amaral dos

    1999-08-01

    This works evaluates by punctuation the performance in conventional Brazilian industries radiation protection area which make use of small industrial gauges and industrial radiography. It proposes, procedures for industry self-evaluation, besides a new radiation protection plans pattern for the small industrial gauges area. The data source where inspection reports of Dosimetry Radiation Protection Institute/Nuclear Energy Commission conventional Brazilian industries' radiation protection plans, beyond visitation to the inspection place. The performance evaluation has been realized both in the administrative and operational aspects of the industries. About of 60% of the industries have a satisfactory register control which does not happen to the operational control. The performance evaluation advantage is that industries may self-evaluate, foreseeing Dosimetry Radiation Protection Institute's regulation inspections, correcting its irregularities, automatically improving its services. The number of industries which have obtained satisfactory performance in both areas is below 70%, both in administrative and operational aspects. Such number can be considered a low one as it is radiation protection. The procedures propose in this work aim to improve such a situation. (author)

  10. Low Impact Development for Industrial Areas

    Science.gov (United States)

    2015-07-01

    copper gutters can also be significant sources of metal pollutants. Other studies indicate that vehicle disc brake pads and car tires can be a...industrial areas to develop the performance criteria for LID systems that specifically targeted these areas. Areas targeted include scrap metal recycling

  11. Governing multi-actor decision processes in Dutch industrial area redevelopment

    NARCIS (Netherlands)

    Blokhuis, E.G.J.

    2010-01-01

    In the first part of the thesis, a literature review is presented. In this literature review, industrial areas in the Netherlands are discussed, leading to the conclusion that industrial areas are important for realizing sustainable economic growth in the Netherlands. Industrial areas play an

  12. The obtainment of carbon adsorbents and their compositions for cleaning industrial wastewater

    OpenAIRE

    JUMAEVA DILNOZA JURAYEVNA; TOIROV OLIMJON ZUVUROVICH

    2016-01-01

    The novel coal adsorbents based on Angren coal have been elaborated. They are the following: a) composite material obtained by addition in coal carbonates of alkaline-earth metals, allowing to rise sorption capacity adsorbent by 70-80% and use it can be used for sewage purification from some ions of inorganic impurities and decreasing of the water rigidity from 16.4 to 0.5 mg∙eq/l; b) heat-treated at 550 °C, with hydrophobic properties (wetting angle α = 99°), a porosity of 30%, capacity to k...

  13. Resilience of chemical industrial areas through attenuation-based security

    International Nuclear Information System (INIS)

    Reniers, G.L.L.; Sörensen, K.; Khan, F.; Amyotte, P.

    2014-01-01

    This paper investigates the possibility of attenuation-based security within chemical industrial areas. Representing chemical industrial areas as mathematical networks, we prove by case-study that the resilience to disaster of such areas may follow a power-law distribution. Furthermore, we examine what happens to the network when highly hazardous installations would be intelligently protected against malicious acts: the network disintegrates into separate smaller networks. Hence, islands are formed with no escalation danger in between. We conclude that it is possible to protect chemical industrial areas in such a way that they are more resilient against terrorism

  14. Performance evaluation of the conventional Brazilian industries radiation protection in the small industrial gauges and industrial radiography areas; Sistema de avaliacao de desempenho em radioprotecao das industrias convencionais brasileiras nas areas de medidores nucleares e radiografia industrial

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Joyra Amaral dos

    1999-08-01

    This works evaluates by punctuation the performance in conventional Brazilian industries radiation protection area which make use of small industrial gauges and industrial radiography. It proposes, procedures for industry self-evaluation, besides a new radiation protection plans pattern for the small industrial gauges area. The data source where inspection reports of Dosimetry Radiation Protection Institute/Nuclear Energy Commission conventional Brazilian industries' radiation protection plans, beyond visitation to the inspection place. The performance evaluation has been realized both in the administrative and operational aspects of the industries. About of 60% of the industries have a satisfactory register control which does not happen to the operational control. The performance evaluation advantage is that industries may self-evaluate, foreseeing Dosimetry Radiation Protection Institute's regulation inspections, correcting its irregularities, automatically improving its services. The number of industries which have obtained satisfactory performance in both areas is below 70%, both in administrative and operational aspects. Such number can be considered a low one as it is radiation protection. The procedures propose in this work aim to improve such a situation. (author)

  15. A sustainable approach for industrial area redevelopment in the Netherlands

    NARCIS (Netherlands)

    Blokhuis, E.G.J.; Schaefer, W.F.; Kungolos, A.; Brebbia, C.A.; Beriatos, E.

    2007-01-01

    According to the Dutch Ministry of Economic Affairs, creating space for industrial areas is necessary to realize a sustainable economic growth. Currently, the average time needed to redevelop an industrial area in the Netherlands is 10 years. Furthermore, almost 30% of the Dutch stock of industrial

  16. E-COMMERCE AREA FOR TEXTILE INDUSTRY

    OpenAIRE

    R. M. Aileni; D. Farima; M. Ciocoiu

    2011-01-01

    This paper presents some management aspects concerning the e-commerce area for textile industry.Here it can have database management – customers, products and brand visualisation management. The databasemanagement can be doing by using a database management system. For database management it was use therelational model based on first-order predicate logic [1]. In this paper it was analyzed the relational databasemodel. The e-commerce area is born from need to simplify the buying and selling g...

  17. Environmental impact of industrial wastes on marine area, case study: Port Sudan coastal area

    International Nuclear Information System (INIS)

    Abdalrahman, E. A. H.

    2004-05-01

    This study was carried out to determine the effect of the industrial wastes on marine environment in Port Sudan area. A very intensive study has been made to identify types of pollutions drained in seawater at study area of Red Sea coast. Samples were taken from three stations (1, 2 and 3) at study area and the following analysis were made: Temperature, salinity, hydrogen ion concentration, dissolved oxygen, biochemical oxygen demand, nutrient, oil and grease. The laboratory results revealed that wastes pollute the marine environment as the cooling water from studied industries which is drain into the seawater increases the degree of temperature approximately from 6 to 12 C degree above the allowed rate, the matter which was adverse effect on the environment and living marine creatures due to the sudden change of temperature degree. Also, it was found that the great amount of oil spills discharged into seawater due to many factors such as: cooling water, oil spills from ships and loading and discharging operations of crude oil ships. Accordingly these oils spills might have a deadly effect on living marine creatures, which have been mention in details through out this research. Hence, and to minimize this adverse effect of industrial wastes and others on the marine environment, may recommend to the following: Pretreatment to the industrial wastes should be taking before its draining into the Red Sea coastal area. Surveillance all ships into the port and observing loading and discharging operations as well as those ships in the regional waters and implementing the international maritime laws. Enlightenment the industrial administrators and manpower working with them about the severity which will definitely cause the marine environmental deterioration as a result of industrial wastes. To punish every one who violates the laws of environment protection. Thus, can be safeguarding the environment from pollutions and consequently develop the natural resources and proceed

  18. Radiation protection program of Petrobras in industrial radiography area

    International Nuclear Information System (INIS)

    Signorini, M.

    1988-01-01

    Industrial hygiene has as main purpose the preservation of employees physical integrity when exposed to certain agressive agents. PETROBRAS Industrial hygiene program forecasts preventive policies in several specific fields. For the ionizing radiations area it was developed the ''Radiologic Protection Program'' which also deals with specific actions in industrial radiography jobs. These actions are hereinafter presented. (C.M.) [pt

  19. The refinery industry within the Mediterranean area

    International Nuclear Information System (INIS)

    1999-01-01

    During the period 1997-1998 Ome (Observatorie Mediterraneen de l'Energie) within a working group which was formed by the experts among the associated companies, has carried on an analysis on the prospects of refinery industry in the Mediterranean area in view of 2010. The aim of this study was to make clear, to the different operators, the consequences of the political choices in investments on refinery industry in the context of the progressive liberalization of the sector [it

  20. Understanding inter-industry wage structures in the euro area

    OpenAIRE

    Genre, Véronique; Momferatou, Daphne; Kohn, Karsten

    2009-01-01

    This paper focuses on the euro area wage structure and its potential determinants from a sectoral viewpoint. Merging information from the OECD Structural Analysis database with data from the EU Labour Force Survey, we construct a cross-country panel of 22 industries in 8 euro area countries for 1991-2002. Data inspection confirms the existence of a fairly stable inter- industry wage structure that is similar across countries. We then apply panel data techniques to identify factors explaining ...

  1. Chemical industrial areas and their dynamic danger behaviour

    NARCIS (Netherlands)

    Reniers, Genserik L L; Audenaert, Amaryllis; Dullaert, W.; Soudan, K.

    2007-01-01

    Chemical industrial areas or so-called chemical clusters consist of various companies situated next to each other. Such areas are composed of hundreds of chemical installations exhibiting danger to a certain degree for initiating or continuing knock-on effects. In this paper, a methodology to model

  2. ANALYSIS OF INVESTMENT ATTRACTIVENESS REDEVELOPMENT PROJECTS THE INDUSTRIAL AREAS IN KIEV

    Directory of Open Access Journals (Sweden)

    Yevsyukov T. O.

    2017-08-01

    Full Text Available At the present stage of development of land relations in major cities of our country important issue is the development of investment, attract and use foreign investment. According to the Law of Ukraine "On investment activity" under the investment necessary to understand "all types of property and intellectual values invested in business and other activities, which resulted in creating profit (income or social effect is achieved." For the economy of any city, including the city. Kyiv and development of urban land use, renovation of industrial areas deindustrialization of inefficient production centers, it is extremely important investment activity (foreign investment as one of the most effective mechanisms for the development and activities of national companies. The purpose of the article to analyze the investment attractiveness of the redevelopment projects of industrial areas to economic development of eco-industrial land use in Kiev, despite the downward trend in investment activity of domestic enterprises, the need for technical and technological modernization of production as well as the entire market infrastructure, redevelopment of industrial areas. Redevelopment areas – this is a comprehensive activity aimed at changing the existing construction work carried out with the help of large investments (investments in reconstruction; renovation of; overhaul; demolition; conversion; improving the environment, which results in a positive effect on economic, social and environmental aspects. Investment and construction projects related to redevelopment of industrial land use (objects in the management of the city, characterized by considerable risks given the high capital intensity, binding to a specific area, and the impact of other internal and external factors. That is why this investment activity should be ensured exceptional dynamic management to ensure the quality of implementation and the necessary level of profitability and

  3. Analysis of Risk Optimization on the Industrial Area Around

    International Nuclear Information System (INIS)

    Sony, DT; Demon-Handoyo

    2000-01-01

    Indonesia as an industrial country, there are large industrial area whichis directly or indirectly have an effect to human health by routine dischargeof waste from industrial installations. So, the criteria limit must bedetermined to regulate industrial area. The PRA method (Probabilistic RiskAssessment) is used in the nuclear technology especially reactor safetytechnology could be applied to accommodate those problems. The principles ofPRA method is to determine probability and consequences for accident ofindustrial plant or transportation of product. The analysis procedureincludes classification of industry activity type and inventories, estimationof external consequences, estimation of probability for installation andtransportation accident, determination of social risk and prioritization ofrisks. Calculation of consequence is based on the lost of life which isaffected by fire, toxic and explosive. The calculation for one industrialarea simple model as case study was done. From the calculation result, theconsequences value of 0 - 25 persons/event; 26 - 50 persons/event; 51 - 75persons/event, 625 - 650 persons/event and the event probability value of1.10 -2 to 3.10 -8 are obtained. The optimization value of industrial areaaround can be determined by using combination of probability value andconsequences value. (author)

  4. [Pollution-ecological problems of old industrial and mining areas and future research prospects].

    Science.gov (United States)

    Zhou, Qixing

    2005-06-01

    Environmental pollution and its solicitation in ecological problems of old industrial and mining areas have become a worldwide technological puzzle restricting sustainable economic and social development. But, the definition and category of old industrial and mining areas is still disputed as an important concept. In this paper, the concept of old industrial and mining area was discussed in theory, and, proceeded with analyzing the complexity of current situation and environmental pollution problems of old industrial and mining areas in China, more keystone attention was paid to the secondary pollution problems from old industrial and mining areas as an important frontier of science. On the basis of expounding the complexity and characters of environmental pollution in old industrial and mining areas, it was suggested that as two key scientific problems in environmental sciences and ecology, the formation mechanisms and control technology of secondary pollution in old industrial and mining areas and the responses of new-type diseases to environmental pollution based on molecular ecotoxicology should be systematically studied on the national scale, and be an important component of environmental protection strategy in China in the future.

  5. Solid waste management in Khartoum industrial area

    International Nuclear Information System (INIS)

    Elsidig, N. O. A.

    2004-05-01

    This study was conducted in Khartoum industrial area (KIA). The study discusses solid waste generation issues in KIA as well as solid waste collection, storage, transport and final disposal methods. A focus on environmental impact resulting from the accumulation of solid waste was presented by reviewing solid waste management in developed as well as developing countries starting from generation to final disposal. Environmental health legislation in Sudan was investigated. The study covers all the (eight) industrial sub-sectors presented in KIA. The main objective of the study is to assess the situation of solid waste in KIA. To fulfill the objectives of the study the researcher deemed it necessary to explore problems related to solid waste generation and solid waste arrangement with special emphasis on final disposal methods. Practically, 31 (thirty-one) factories representing the different industrial sub-sectors in KIA were studied. This represents 25% of the total number of factories located in KIA. Data were obtained by, questionnaires, interviews and observations mainly directed to concerned officials, solid waste workers, pickers and brokers. Obtained data were stored, coded, tabulated and analyzed using the computer systems (excel and SPSS programmes). The obtained results should clear deficiency in the management of solid waste which led to great environmental deterioration in KIA and neighboring residential areas. The environment in studied area is continuously polluted due to high pollution loads and unproved solid waste management. In order to maintain health environment operating factories have to pretreated their solid waste according to the recognized standards and waste minimization techniques such as recycling and re use should be widely applied, moreover, running crash programme for environmental sanitation in Khartoum state should be expanded and improved to include special characteristics of solid waste from industries. Finally, increase awareness

  6. Climate Variability and Industrial-Suburban Heat Environment in a Mediterranean Area

    Directory of Open Access Journals (Sweden)

    Giuseppina A. Giorgio

    2017-05-01

    Full Text Available The Urban Heat Island (UHI phenomenon prevalently concerns industrialized countries. It consists of a significant increase in temperatures, especially in industrialized and urbanized areas, in particular, during extreme warm periods like summer. This paper explores the climate variability of temperatures in two stations located in Matera city (Southern Italy, evaluating the increase in temperatures from 1988 to 2015. Moreover, the Corine Land Covers (1990–2000–2006–2012 were used in order to investigate the effect of land use on temperatures. The results obtained confirm the prevalence of UHI phenomena for industrialized areas, highlighting the proposal that the spreading of settlements may further drive these effects on the microclimate. In particular, the presence of industrial structures, even in rural areas, shows a clear increase in summer maximum temperatures. This does not occur in the period before 2000, probably due to the absence of the industrial settlement. On the contrary, from 2000 to 2015, changes are not relevant, but the maximum temperatures have always been higher than in the suburban area (station localized in green zone during daylight hours.

  7. A general tool to construct case library for industrial area redevelopment

    NARCIS (Netherlands)

    Wang, T.; Jessurun, Joran; Han, Q.; de Vries, B.

    2015-01-01

    Abandoned industrial area redevelopment is of great importance for regional sustainability. However it is difficult to decide how one industrial area can be redeveloped because of the complexity involved, including but not limited to, expectation from various stakeholders, large amount of investment

  8. A study about the prevalence and the related factors of metabolic syndrome and fatty liver comparing the urban area to tbe industrial area

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Hyo Eun; Cho, Pyong Kon [Dept. of of Radiological Science, Catholic University of Daegu. Daegu (Korea, Republic of)

    2016-09-15

    As the tertiary industry is being developed, many problems are introduced in an industrial area in Korea. This study aims to investigate the residents' health conditions, such as the prevalence of metabolic syndrome and fatty liver diagnosed by ultrasonography, comparing the urban with the industrial areas. The subjects were 378 adults in the urban area and 376 adults in the industrial area. Subject variables accounted for were gender, age, drinking habits, smoking habits, physical activities, waist circumferences and BMI. In blood tests, fasting blood glucose, triglyceride, HDL, blood pressures, total cholesterol, AST, ALT and GGT were examined. Also, the presence and absence of fatty liver, diagnosed using ultrasonography, was investigated. As a result, the prevalence of metabolic syndrome were 43.7% in the urban area and 51.6% in the industrial area, hence it was significantly higher in the industrial area than in the urban area. Fasting blood glucose, triglyceride and waist circumference in the distribution of the individual components were 47.4, 53.7, and 16.1% in the urban area and 54.5, 61.5, and 22.9% in the industrial area respectively, so it was substantially higher in the industrial area than in the urban area. On the other hand, HDL, diastolic blood pressure, and fatty liver were 25.7, 43.4, and 44.7% in the urban area and 21.3, 19.9, and 36.7% in the industrial area respectively and thus it was much higher in the urban area than in the industrial area. In conclusion, this study shows that there were significant differences between the residents' health condition, comparing the urban area to the industrial area. Therefore, the precaution and aggressive management of metabolic syndrome may be necessary, in accordance with the characteristics of the industrial zone.

  9. A study about the prevalence and the related factors of metabolic syndrome and fatty liver comparing the urban area to tbe industrial area

    International Nuclear Information System (INIS)

    Jeong, Hyo Eun; Cho, Pyong Kon

    2016-01-01

    As the tertiary industry is being developed, many problems are introduced in an industrial area in Korea. This study aims to investigate the residents' health conditions, such as the prevalence of metabolic syndrome and fatty liver diagnosed by ultrasonography, comparing the urban with the industrial areas. The subjects were 378 adults in the urban area and 376 adults in the industrial area. Subject variables accounted for were gender, age, drinking habits, smoking habits, physical activities, waist circumferences and BMI. In blood tests, fasting blood glucose, triglyceride, HDL, blood pressures, total cholesterol, AST, ALT and GGT were examined. Also, the presence and absence of fatty liver, diagnosed using ultrasonography, was investigated. As a result, the prevalence of metabolic syndrome were 43.7% in the urban area and 51.6% in the industrial area, hence it was significantly higher in the industrial area than in the urban area. Fasting blood glucose, triglyceride and waist circumference in the distribution of the individual components were 47.4, 53.7, and 16.1% in the urban area and 54.5, 61.5, and 22.9% in the industrial area respectively, so it was substantially higher in the industrial area than in the urban area. On the other hand, HDL, diastolic blood pressure, and fatty liver were 25.7, 43.4, and 44.7% in the urban area and 21.3, 19.9, and 36.7% in the industrial area respectively and thus it was much higher in the urban area than in the industrial area. In conclusion, this study shows that there were significant differences between the residents' health condition, comparing the urban area to the industrial area. Therefore, the precaution and aggressive management of metabolic syndrome may be necessary, in accordance with the characteristics of the industrial zone

  10. Chemical composition of sewage sludge of domestic and industrial areas of Hyderabad

    International Nuclear Information System (INIS)

    Ansari, T.P.; Kazi, T.G.; Kazi, G.H.

    2001-01-01

    A study on chemical composition sewage sludge of domestic and industrial areas of Hyderabad city has been carried out. The sludge samples were collected from various domestic and industrial areas of Hyderabad, over a period of 3 months. Analysis of sludge samples for different micro-nutrients and toxic elements has been accomplished by reliable analytical methods using atomic absorption, UV and colorimeter. It is observed that the levels of copper, nickel, zinc, lead and cadmium are higher in sludge samples of industrial area than those of domestic areas of Hyderabad. (author)

  11. Management of industrial sites and areas contaminated by radionuclides in France

    International Nuclear Information System (INIS)

    Oudiz, A.; Rousseau, D.

    2001-01-01

    The presentation involves two parts making mention on the one hand on the industrial sites management and on the other hand on contaminated areas management. In a third part, are considered the analogies and the differences susceptible of appearing in the management modes of industrial sites and areas. (N.C.)

  12. assessment of atmospheric metal depositions in the industrial areas

    African Journals Online (AJOL)

    Osondu

    and Ogun states house many industries which are assumed to have impacted the states. It is in ... southwest Nigeria were assessed to determine the extent of air pollution of these areas. ... of pollutants but are expensive and risks of ... Island) served as the Control site for Lagos ..... cement industry on accumulation of heavy.

  13. A Study on regeneration cases with industrial Heritage in mining areas of Korea

    Science.gov (United States)

    Cho, Seungyeoun; Ji, Sangwoo; Yim, Giljae

    2017-04-01

    The mining areas have to face urban decline problem in population and aging after its closing. Many mines were shut down due to changes in industrial structure through 20 century. Central and local governments has been trying to solve urban decline of abandoned mine areas by enacting special acts or introducing support programs for decades. In the year of 1995, South Korean government also enacted "Special act on the assistance to the development of abandoned mine areas" to promote the economy of abandoned mine areas that is depressed following the decline of the coal industry and to help balanced regional development and to improve the living standard of the residents in such abandoned mine areas. Local authorities has been trying to revitalize the regional economy by attracting tourism industry under the financial support and deregulation by this special law. With this background, this study analysis 13 regeneration cases which are utilizing the industrial heritage of the abandoned area in S. Korea. Despite the importance of mining, negative images of abandon mine have been engraved due to environmental destruction. Most of abandoned mines were left without any action since its closing. Early stage of abandoned mine area regeneration, such as Sabuk, Munkyong, are focusing on adjacent land not on abandoned mine. Abandoned mines were restored its original state and theme park including hotels, casinos and other tourist facilities were developed on adjacent land. Eco-trails on some granite caves such as Jungsun were opened to the public as natural resources not industrial heritage. The industrial heritage was very restricted to making museums about history of mining industry. However, there has been a significant change in perception toward reusing industrial heritage for urban regeneration in recent years. From the viewpoint of urban regeneration, abandon mine areas and its facilities are receiving attention as important regional assets as industrial heritage to

  14. EU energy policies achievement by industries in decentralized areas

    Science.gov (United States)

    Destro, Nicola; Stoppato, Anna; Benato, Alberto; Schiro, Fabio

    2017-11-01

    Energy Roadmap outlined by the European Commission sets out several routes for a more sustainable, competitive and secure energy system in 2050. All the outlined scenarios consider energy efficiency, renewable energy, nuclear energy and carbon capture and storage. In this paper, more attention has been devoted to the energy efficiency issue, by the identification of new micro and small networks opportunity fed by hybrid plants in the North-East of Italy. National energy balance and national transmission system operator data allowed to collect industrial energy consumptions data on the investigated area. Applying industrial statistics to the local energy needs allows to collect a dataset including consumption information by factory and by company structure (size and employees) for each industrial sector highlighting the factory density in the area. Preliminary outcomes from the model address to the exploitation of local by-product for energy purposes.

  15. Heat pump applications in utility centres for large industrial areas in the Netherlands

    NARCIS (Netherlands)

    Wit, J.B. de

    1999-01-01

    A grand design for industrial waste heat utilisation has been composed in Rijnmond Industrial Area, the largest (petrochemical) industrial area in The Netherlands. In combination with local CHP plants, an HP, MP and LP steam exchange system has been developed. The primary energy savings of this

  16. A multi-attribute Systemic Risk Index for comparing and prioritizing chemical industrial areas

    International Nuclear Information System (INIS)

    Reniers, G.L.L.; Sörensen, K.; Dullaert, W.

    2012-01-01

    Measures taken to decrease interdependent risks within chemical industrial areas should be based on quantitative data from a holistic (cluster-based) point of view. Therefore, this paper examines the typology of networks representing industrial areas to formulate recommendations to more effectively protect a chemical cluster against existing systemic risks. Chemical industrial areas are modeled as two distinct complex networks and are prioritized by computing two sub-indices with respect to existing systemic safety and security risks (using Domino Danger Units) and supply chain risks (using units from an ordinal expert scale). Subsequently, a Systemic Risk Index for the industrial area is determined employing the Borda algorithm, whereby the systemic risk index considers both a safety and security network risk index and a supply chain network risk index. The developed method allows decreasing systemic risks within chemical industrial areas from a holistic (inter-organizational and/or inter-cluster) perspective. An illustrative example is given.

  17. Exporting Australia's remote area power supply industry

    International Nuclear Information System (INIS)

    Presnell, K.

    2001-01-01

    The Australian renewable energy industry has two faces: Remote Area Power Supply systems (RAPS), where the trade-off is between the traditional diesel generator and diesel hybrid or the stand alone renewable energy system. The competency of the Australian RAPS industry is recognised internationally. Grid connected renewable energy technologies, where industry activity is expanding rapidly, but where Australian competencies carry relatively little weight internationally (other than for research and development of related components such as big performance, crystalline silicon photovoltaic cells). Individual industry development strategies are required in each instance. The focus of this paper is on strategies that enhance the export potential of the Australian RAPS industry. Involvement of the electricity supply utilities is promoted as a means of quickly instituting a substantial industry presence. The term RAPS can be confusing. It is used to describe any supply system serving a remote user, be they a single property owner with a simple, stand alone DC photovoltaic supply, or several communities with complex, inter-connected, diesel/hybrid power stations, sometimes termed a 'remote-grid'. Utility interest tends to emerge as market fragmentation decreases, system complexity increases and economies of scale become evident. A review of the domestic situation is a necessary adjunct to development of export strategies for Australian RAPS products. The two are inexorably linked, as is reflected in the format of this paper. (author)

  18. Study on waste waters of metal finishing industries around Lahore metropolitan area

    International Nuclear Information System (INIS)

    Khan, Izhar-ul-Haq; Mahmood, F.; Tufail, S.; Naeem, M.

    2002-01-01

    Study was undertaken on the waste water samples from metal finishing industries of Lahore metropolitan area for the evaluation of metallic impurities. The metal finishing industry was classified into three categories i. e. medium scale, small scale and cottage scale industry. About 93 wastewater samples were collected from various metal finishing industries around Lahore metropolitan area. In addition to toxic elements like cadmium, nickel and zinc the other parameters such as hydrogen ion concentration (pH), Electrical conductivity (EC) and Total Dissolved Salts (TDS) were also determined. (author)

  19. Cross-industry Collaborations in the Convergence Area of Functional Foods

    NARCIS (Netherlands)

    Bornkessel, S.; Broring, Stefanie; Omta, S.W.F.

    2016-01-01

    Convergence processes are based on the activity of distinct industry sectors showing crossindustry
    collaborations. The aim of this paper is to analyze cross-industry collaborations between
    the food and pharmaceutical sectors in the convergence area of functional foods. Selected
    companies

  20. EU energy policies achievement by industries in decentralized areas

    Directory of Open Access Journals (Sweden)

    Destro Nicola

    2017-01-01

    Full Text Available Energy Roadmap outlined by the European Commission sets out several routes for a more sustainable, competitive and secure energy system in 2050. All the outlined scenarios consider energy efficiency, renewable energy, nuclear energy and carbon capture and storage. In this paper, more attention has been devoted to the energy efficiency issue, by the identification of new micro and small networks opportunity fed by hybrid plants in the North-East of Italy. National energy balance and national transmission system operator data allowed to collect industrial energy consumptions data on the investigated area. Applying industrial statistics to the local energy needs allows to collect a dataset including consumption information by factory and by company structure (size and employees for each industrial sector highlighting the factory density in the area. Preliminary outcomes from the model address to the exploitation of local by-product for energy purposes.

  1. Composition of airborne particulate matter in the industrial area versus mountain area

    Directory of Open Access Journals (Sweden)

    Barbora Sýkorová

    2016-03-01

    Full Text Available The paper deals with research of air pollution in two different locations on the Moravian-Silesian Region, Czech Republic. These are the sites Ostrava-Radvanice, which is located in the area affected by the industry and Ostravice in the mountains (without significant effect of the industry. The dust particles collected at these locations were subjected to a wide range of analyses. The mass concentration, the mass-size distribution, mineralogical composition, the concentration of PAHs (polycyclic aromatic hydrocarbons, and the concentrations of selected metals (Cd, Pb, Zn, Fe, Mn, As, Ni, Co, and Cr were observed at the particulate matter.

  2. Assessment of industrial minerals and rocks in the controlled area

    International Nuclear Information System (INIS)

    Castor, S.B.; Lock, D.E.

    1996-01-01

    Yucca Mountain in Nye County, Nevada, is a potential site for a permanent repository for high-level nuclear waste in Miocene ash flow tuff. The Yucca Mountain controlled area occupies approximately 98 km 2 that includes the potential repository site. The Yucca Mountain controlled area is located within the southwestern Nevada volcanic field, a large area of Miocene volcanism that includes at least four major calderas or cauldrons. It is sited on a remnant of a Neogene volcanic plateau that was centered around the Timber Mountain caldera complex. The Yucca Mountain region contains many occurrences of valuable or potentially valuable industrial minerals, including deposits with past or current production of construction aggregate, borate minerals, clay, building stone, fluorspar, silicate, and zeolites. The existence of these deposits in the region and the occurrence of certain mineral materials at Yucca Mountain, indicate that the controlled area may have potential for industrial mineral and rock deposits. Consideration of the industrial mineral potential within the Yucca Mountain controlled area is mainly based on petrographic and lithologic studies of samples from drill holes in Yucca Mountain. Clay minerals, zeolites, fluorite, and barite, as minerals that are produced economically in Nevada, have been identified in samples from drill holes in Yucca Mountain

  3. Assessment of industrial minerals and rocks in the controlled area

    Energy Technology Data Exchange (ETDEWEB)

    Castor, S.B. [Nevada Bureau of Mines and Geology, Reno, NV (United States); Lock, D.E. [Mackay School of Mines, Reno, NV (United States)

    1996-08-01

    Yucca Mountain in Nye County, Nevada, is a potential site for a permanent repository for high-level nuclear waste in Miocene ash flow tuff. The Yucca Mountain controlled area occupies approximately 98 km{sup 2} that includes the potential repository site. The Yucca Mountain controlled area is located within the southwestern Nevada volcanic field, a large area of Miocene volcanism that includes at least four major calderas or cauldrons. It is sited on a remnant of a Neogene volcanic plateau that was centered around the Timber Mountain caldera complex. The Yucca Mountain region contains many occurrences of valuable or potentially valuable industrial minerals, including deposits with past or current production of construction aggregate, borate minerals, clay, building stone, fluorspar, silicate, and zeolites. The existence of these deposits in the region and the occurrence of certain mineral materials at Yucca Mountain, indicate that the controlled area may have potential for industrial mineral and rock deposits. Consideration of the industrial mineral potential within the Yucca Mountain controlled area is mainly based on petrographic and lithologic studies of samples from drill holes in Yucca Mountain. Clay minerals, zeolites, fluorite, and barite, as minerals that are produced economically in Nevada, have been identified in samples from drill holes in Yucca Mountain.

  4. Health Impacts of Air Pollution around Major Industrial Areas

    Directory of Open Access Journals (Sweden)

    Mathilde Pascal

    2013-01-01

    Full Text Available We performed a literature review to investigate how epidemiological studies have been used to assess the health consequences of living in the vicinity of industries. 77 papers on the chronic effects of air pollution around major industrial areas were reviewed. Major health themes were cancers (27 studies, morbidity (25 studies, mortality (7 studies, and birth outcome (7 studies. Only 3 studies investigated mental health. While studies were available from many different countries, a majority of papers came from the United Kingdom, Italy, and Spain. Several studies were motivated by concerns from the population or by previous observations of an overincidence of cases. Geographical ecological designs were largely used for studying cancer and mortality, including statistical designs to quantify a relationship between health indicators and exposure. Morbidity was frequently investigated through cross-sectional surveys on the respiratory health of children. Few multicenter studies were performed. In a majority of papers, exposed areas were defined based on the distance to the industry and were located from 20 km from the plants. Improving the exposure assessment would be an asset to future studies. Criteria to include industries in multicenter studies should be defined.

  5. Precautionary interventions in industrial areas. An optimal stopping approach

    Energy Technology Data Exchange (ETDEWEB)

    Pauwels, N

    2001-04-01

    The contribution consists of an abstract of a PhD thesis. The thesis deals with the precautionary evacuation of an industrial facility's workforce threatened by a radiological release from a nuclear power plant nearby. The issue of deferring intervention decisions until additional information is available is addressed. Furthermore, interventions in industrial areas with a concentration of chemical and petrochemical plants form part of this study.

  6. Precautionary interventions in industrial areas. An optimal stopping approach

    International Nuclear Information System (INIS)

    Pauwels, N.

    2001-01-01

    The contribution consists of an abstract of a PhD thesis. The thesis deals with the precautionary evacuation of an industrial facility's workforce threatened by a radiological release from a nuclear power plant nearby. The issue of deferring intervention decisions until additional information is available is addressed. Furthermore, interventions in industrial areas with a concentration of chemical and petrochemical plants form part of this study

  7. Creating new path for Old Industrial Areas: A Case Study on Dalian city, China

    Directory of Open Access Journals (Sweden)

    Yimei Yin and Zhigao Liu

    2012-01-01

    Full Text Available The formation of new industries has recently been widely studied, but little research attention has been paid to the formation of new industries in old industrial districts, especially in transitional countries such as China. Based on fieldwork and rereading historical archives, this paper uses an example of Dalian tourism cluster to contribute to understanding the emergence of new economy in old industrial areas in a transitional country. The Section 2 of this paper will provide the theoretical framework from evolutionary economics for my empirical study. In Section 3, this paper will discuss the main characteristics of the decline of old industrial areas in Northeast China and the significances of developing new economy to revitalizing old industry areas. Section 4 will introduce the transitional history of Dalian economy from a high industrial region to a new economy city and also provides descriptive information about the development process of Dalian tourism industry. In Section 5, this paper will probe into the dynamics of the Dalian tourism cluster, from viewpoints of co-evolution and co-adaptation of firm, technology and institutions. Finally, we will give some policy suggestions of how to foster and promote new industries in old industrial areas, especially for transitional countries.

  8. Characteristic of ambient airborne and respirable particulate around a non formal industrial area

    International Nuclear Information System (INIS)

    Muhayatun Santoso; Diah Dwiana Lestiani; Mariana Marselina; Rita Mukhtar

    2016-01-01

    Characterization of airborne particulate matter and respirable particulate in Parung Panjang district especially on surrounding non formal used batteries industrial area has been carried out to follow up the previous results with respect to high concentrations of lead detected in Serpong area. Sampling of airborne particulate matter in Parung Panjang was conducted using Gent stacked filter unit sampler, while the respirable particulate matter samples collected using personal dust sampler in Parung Panjang as a non formal Industrial area and Sukarasa village as a control, during 2011-2012. The concentration of masses were determined gravimetrically, while for elemental concentrations by X-Ray based methods. The average of mass concentration of air ambient PM 2.5 and PM 10 in Parung Panjang were 27.3 ± 13.7 and 77.5 ± 17.1 μg.m -3 , respectively. While the average concentration of respirable particulate in non formal industrial and control areas were 260 ± 233 and 82 ± 38 μg.m -3 , respectively. The percentage of average Pb concentration in PM 2.5 and PM 2.5-10 were contribute up to 45 and 10 % of the mass concentration, respectively. The maximum percentage concentration of Pb in respirable particulate in industrial and control area were 12.11 and 0.27 %, respectively. These results showed that the Pb concentrations in respirable particulate in industrial area were significantly tens times higher than in the control area. The high concentration of Pb in Parung Panjang was the main key element came from the used lead battery industry and one of pollutant source that contributed to the Pb pollution in Serpong area. (author)

  9. Vegetation pattern and soil characteristics of the polluted industrial area of Karachi

    International Nuclear Information System (INIS)

    Kabir, M.; Iqbal, M.Z.; Farooqi, M.Z.; Shafiq, M.

    2010-01-01

    A quantitative phyto sociological survey was conducted around the industrial areas of Sindh Industrial Trading Estate (S.I.T.E.) of Karachi. The herbaceous, shrubs vegetation was predominantly disturbed in nature. Fifteen plant communities based on Importance Value Index (IVI) of species were recognized. Eighty plant species were recorded in industrial areas. Abutilon fruticosum L., attained the highest importance value index (823.25) followed by Prosopis juliflora DC. (662.62), Corchorus trilocularis L. (467.20), Aerva javanica Burm.f. (419.97), Amaranthus viridis L. (397.65) and Senna holosericea L. (387.22), respectively. P. juliflora and A. fruticosum showed leading first dominant in five and four stands, respectively. Whereas, A. javanica, A. viridis, S. holosericea, Launaea nudicaulis L., Crochorus depressus L. and Salvadora L., attained the presence class III. Zygophyllum simplex L., Suaeda fruticosa L., Convolvulus glomeratus Choisky, Cressa cretica L., Cleome viscosa L., Calotropis procera Willd, Blepharis sindica T. Anderson, Rhynchosia pulverulenta L., Abutilon pakistanicum Jafri and Ali, Chenopodium album L., Capparis decidua Forssk and Digera muricata L. Mart showed the presence of class II. Whereas, rest of 58 species showed presence of class I. The soil characteristics of the polluted industrial area were also analyzed and related with the vegetation of the polluted areas. The Industrial area soil was coarse in texture and ranged from sandy clay loam to sandy loam. The soil was acidic to alkaline in nature. Maximum water holding capacity, bulk density, porosity, CaCO/sub 3/, pH, organic matter, total organic carbon, chloride, electrical conductivity, total dissolved salt, available sulphur contents, exchangeable sodium and potassium were recorded in wide range. It was concluded that certain edaphic factors due to industrial activities and induction of pollutants were responsible for variation in vegetation composition of the study area. (author)

  10. Heavy Metal Contamination Assessment and Partition for Industrial and Mining Gathering Areas

    Directory of Open Access Journals (Sweden)

    Yang Guan

    2014-07-01

    Full Text Available Industrial and mining activities have been recognized as the major sources of soil heavy metal contamination. This study introduced an improved Nemerow index method based on the Nemerow and geo-accumulation index. Taking a typical industrial and mining gathering area in Tianjin (China as example, this study then analyzed the contamination sources as well as the ecological and integrated risks. The spatial distribution of the contamination level and ecological risk were determined using Geographic Information Systems. The results are as follows: (1 Zinc showed the highest contaminant level in the study area; the contamination levels of the other seven heavy metals assessed were relatively lower. (2 The combustion of fossil fuels and emissions from industrial and mining activities were the main sources of contamination in the study area. (3 The overall contamination level of heavy metals in the study area ranged from heavily contaminated to extremely contaminated and showed an uneven distribution. (4 The potential ecological risk showed an uneven distribution, and the overall ecological risk level ranged from low to moderate. This study also emphasized the importance of partition in industrial and mining areas, the extensive application of spatial analysis methods, and the consideration of human health risks in future studies.

  11. Heavy Metal Contamination Assessment and Partition for Industrial and Mining Gathering Areas

    Science.gov (United States)

    Guan, Yang; Shao, Chaofeng; Ju, Meiting

    2014-01-01

    Industrial and mining activities have been recognized as the major sources of soil heavy metal contamination. This study introduced an improved Nemerow index method based on the Nemerow and geo-accumulation index. Taking a typical industrial and mining gathering area in Tianjin (China) as example, this study then analyzed the contamination sources as well as the ecological and integrated risks. The spatial distribution of the contamination level and ecological risk were determined using Geographic Information Systems. The results are as follows: (1) Zinc showed the highest contaminant level in the study area; the contamination levels of the other seven heavy metals assessed were relatively lower. (2) The combustion of fossil fuels and emissions from industrial and mining activities were the main sources of contamination in the study area. (3) The overall contamination level of heavy metals in the study area ranged from heavily contaminated to extremely contaminated and showed an uneven distribution. (4) The potential ecological risk showed an uneven distribution, and the overall ecological risk level ranged from low to moderate. This study also emphasized the importance of partition in industrial and mining areas, the extensive application of spatial analysis methods, and the consideration of human health risks in future studies. PMID:25032743

  12. Wind energy in industrial areas. Results of an attitude survey

    International Nuclear Information System (INIS)

    Schoolderman, J.A.; Huiberts, R.G.J.

    2000-06-01

    The feasibility of installing wind turbines in industrial parks in the Netherlands has been investigated. An overview is given of possibilities and constraints to fit in wind turbines in industrial areas, based on the results of a literature study, a market consultation of sectoral organizations, representatives of local industrial circles and industrial experts in the field of renewable energy. Also a telephone survey was carried out among 130 entrepreneurs in the Netherlands to determine their attitudes towards the use of sustainable energy and wind energy in industrial parks. The results of the attitude study are published in this report. The main report is a separate report for which a separate abstract has been prepared. The intermediate results were discussed at a meeting (23 February 2000), in which representatives from the industry, provinces, municipalities and the government participated

  13. Environmental and Socio-economic Aspects of the Operation of Industrial Regions: The Case Study of the Industrial Area of Alexandroupolis (Greece)

    International Nuclear Information System (INIS)

    Theofanoudi, Aglaia; Diakaki, Christina; Katsivela, Eleftheria

    2009-01-01

    The paper summarizes the results of a study concerning the operation of industrial plants and their effects to the environment. It also addresses, shortly, the consequences to the quality of human life and proposes potential measures that may contribute to the reduction of the negative environmental impacts. The relatively small organized Industrial Area of Alexandroupolis (Greece) is examined as a case study. In particular, the activities of its major industrial facilities are presented and their emissions to the environment are examined. In addition, the socio-economic aspects of the operation of the Industrial Area are studied. The results of the study showed that the operation of the Industrial Area has specific negative effects in the natural environment of the region and in the quality of life of the residents. Methodological and legislative tools, such as control systems for the environmental pollution, the green chemistry, and the environmental management systems, may be employed to assist the prevention and confrontation of environmental problems

  14. The Haendeloe area in Norrkoeping, Sweden: Does it fit for Industrial Symbiosis development?

    Energy Technology Data Exchange (ETDEWEB)

    Hatefipour, Saeid; Baas, Leenard; Eklund, Mats (Div. of Environmental Technology and Management - Dept. of Management and Engineering, Linkoeping Univ., Linkoeping (Sweden)), e-mail: saeid.hatefipour@liu.se

    2011-06-15

    Today, sustainable cities/regions are playing an important role in sustainable development projects. The overall aim of the current paper is to demonstrate an Industrial Symbiosis development in the Haendeloe area of Norrkoeping city in the Oestergoetland county of Sweden. It is part of a research program called 'Sustainable Norrkoeping' focusing on developing links between the industrial and the urban part of the city. As analysis of the current situation is important for understanding the future development, the paper tries to map the current industrial symbiosis links and symbiotic network to identify potentials exist. To achieve this, paper gives a general view of how this area has been developed, constructed, and grown. The next stage is devoted to an inventory of different actors, stakeholders, and companies, their processes and relationships in the form of energy, materials and by-products exchanges, flows and streams into and out of the Haendeloe area considering the Haendeloe/Norrkoeping as system boundaries. In addition, by describing different tools, elements and approaches of industrial symbiosis and considering and applying two main key tools as industrial inventories and input/output matching the paper also tries to show that whether the already industrial activities formed inside the Haendeloe fits for an industrial symbiosis development

  15. Detecting and monitoring UCG subsidence with InSAR

    Energy Technology Data Exchange (ETDEWEB)

    Mellors, R J; Foxall, W; Yang, X

    2012-03-23

    The use of interferometric synthetic aperture radar (InSAR) to measure surface subsidence caused by Underground Coal Gasification (UCG) is tested. InSAR is a remote sensing technique that uses Synthetic Aperture Radar images to make spatial images of surface deformation and may be deployed from satellite or an airplane. With current commercial satellite data, the technique works best in areas with little vegetation or farming activity. UCG subsidence is generally caused by roof collapse, which adversely affects UCG operations due to gas loss and is therefore important to monitor. Previous studies have demonstrated the usefulness of InSAR in measuring surface subsidence related to coal mining and surface deformation caused by a coal mining roof collapse in Crandall Canyon, Utah is imaged as a proof-of-concept. InSAR data is collected and processed over three known UCG operations including two pilot plants (Majuba, South Africa and Wulanchabu, China) and an operational plant (Angren, Uzbekistan). A clear f eature showing approximately 7 cm of subsidence is observed in the UCG field in Angren. Subsidence is not observed in the other two areas, which produce from deeper coal seams and processed a smaller volume. The results show that in some cases, InSAR is a useful tool to image UCG related subsidence. Data from newer satellites and improved algorithms will improve effectiveness.

  16. Heavy metal contamination in the vicinity of an industrial area near Bucharest.

    Science.gov (United States)

    Velea, Teodor; Gherghe, Liliana; Predica, Vasile; Krebs, Rolf

    2009-08-01

    Heavy metals such as lead are well known to cause harmful health effects. Especially children are particularly susceptible to increased levels of lead in their blood. It is also a fact that lead concentration is increasing in the environment due to increased anthropogenic activity. The risk of heavy metal contamination is pronounced in the environment adjacent to large industrial complexes. In a combined case study, the environmental pollution by heavy metals was related to children's health in the vicinity of an industrial area located 4 km south-east from Bucharest about 2 km east from the nearest town-Pantelimon. This site includes companies processing different, nonferrous solid wastes for recovery of heavy metals and producing different nonferrous alloys and lead batteries. In this paper, mainly the results of environmental sampling and analyses are summarized. Water, soil, and atmospheric deposition samples were collected from different locations within 3 km from the industrial area. For comparison, samples were also taken from Bucharest. Water samples were filtered (open collecting pots were used on nine different sites between August and November 2006. At most sampling locations, the heavy metal concentrations in soil decrease with increasing distance to the presumably major source of pollution. Highest heavy metal concentrations were found in 10-20 cm soil depths. There were also decreasing heavy metal concentrations for atmospheric deposition with increasing distance to the industrial site. In surface and groundwater samples, traces of zinc, copper and lead were detected. The heavy metal concentrations in soil were increased in the study area, mostly under legal action limits in low-concern areas (e.g., 1,000 mg Pb/kg dry soil), but often above action limits for high-concern areas (100 mg Pb/kg dry soil) such as populated areas. The soluble lead concentrations in water samples indicate a need for monitoring and assessing water quality in more detail. The

  17. Assessment of the Impact of Industrial Effluents on Groundwater Quality in Okhla Industrial Area, New Delhi, India

    Directory of Open Access Journals (Sweden)

    Wequar Ahmad Siddiqui

    2009-01-01

    Full Text Available In the present study physicochemical parameters like pH, hardness, TDS, chloride, sulphate, nitrate, fluoride, DO, COD and conductivity of some important heavy metals such as iron, cobalt, cadmium, lead, mercury, chromium, selenium and arsenic were first analyzed in effluent water of Okhla industrial area phase-II and then groundwater of near by areas. Obtained values of effluent water were compared with ISI standard for effluent water discharge and groundwater values were compared with ISI and WHO drinking water standards. The result shows that discharge of untreated effluents by the industries is leading to contamination of groundwater of the surrounding areas. Lead, mercury, fluoride, TDS, sulphate was above the desirable limit in effluent water (ISI standard for effluent water discharge. Subsequent analysis of groundwater of nearby areas was rated as unacceptable for drinking because of presence of fluoride in all the samples above the desirable limit. Lead, mercury, cadmium, chloride was also detected in many samples.

  18. Impact of Industrial Releases on Inshas Area

    International Nuclear Information System (INIS)

    El-Messiry, A.M.; Aly, M.M.

    1999-01-01

    Two Egyptian research reactors are located within the nuclear research center at Inshas area, 30 km north east of Cairo. This area are crowded by different industrial plants. The releases from them has a hazardous and economical effects on the research center workers and the surrounding inhabitancy. In the present work we study these effects. A meteorological regional specific data is considered all over the year, including a wind rose characterization. The study considered both normal operating conditions and an accidental releases. The results shows that there are a considerable risk due to normal releases in some areas downwind direction of the major releases, and a highly risk in areas subjected to major exposure. Regional maps of emission distribution, economical damage , pollutant concentration are obtained. The study helps to identify solutions to problems of atmospheric protection. It can be used as a decision support for the environmental, economic, and innovation planning at the national levels taking into consideration the national pollution standards and variety of existing emission sources

  19. The effect of industrial vehicles on the road’s level of service of industrial area in Malang City

    Science.gov (United States)

    Agustin, I. W.; Sumantri, Y.

    2017-06-01

    Malang was a great city that has the characteristics of diverse industries and it was spread in each district. Industry was one of the activities that have the characteristics of the movement with the goal of shipping and distribution. The vehicles used are large vehicles such as trucks and trailers. Problems related to the road’s performance that is the emergence of several points of delay and congestion due to the movement and the volume of vehicles as well as the limited capacity of existing roads. It encourages researchers to do research related to the effect of the industrial vehicle movements on the performance of existing roads in the city of Malang. The main purpose of the research is to analyze the effect of industrial vehicles movement on the road’s level of service of industrial area and to find out alternative solutions to improve the road’s level of service of industrial area. The research used multiple linear regression and do something analysis. The results showed that the types of industry in the city of Malang are ILMETTA, IATT, Agrokim, Sentra and Large Industries. Determining the location of the main observation based on the distribution of industry, have a major impact directly on the street, and the class of the national road are located in Sunandar Priyo Sudarmo Street. Existing land use in Sunandar Priyo Sudarmo Street are industrial, healthcare, office and it dominated by trade and services. Related to the variables that affect the movement of industrial vehicles are the number of employees (X3) and the delivery frequency (X6). The road’s level of service of Sunandar Priyo Sudarmo Street are D and E. While the effect of industrial vehicles movement on the road’s level of service which ranged from 13.77 per cent to 22.13 per cent of the total volume of vehicles on the road. Some referrals will be used to handle the problems that the road widening and the selection of alternative routes for the industrial vehicles.

  20. Nuclear emergency planning and response in industrial areas. Results of a qualitative study in 9 industrial companies

    International Nuclear Information System (INIS)

    Pauwels, N.; Hardeman, F.; Soudan, K.

    1998-11-01

    Substantial economic losses and potential dangerous situations may result when industrial companies unexpectedly have to shut down their activities in an abrupt way. With respect to the industrial companies located in the Antwerp harbour region, the reason for such an unplanned shut-down could be the decision to (preventively) evacuate their workers, or to have them sheltered, in case of an alarm situation at a nearby nuclear power plant of Doel or in any other adjacent industrial factory. Between January and August 1998, the prevention advisors of nine industrial companies have been interviewed to gain insight in the scale and relative importance of several economic costs and practical difficulties that may arise. Moreover, the appropriateness of the existing nuclear emergency response decision structure and intervention philosophy was investigated. The main conclusions drawn from the interviews are reported. Recommendations are made to increase the efficiency of implementing countermeasures in industrial areas

  1. Nuclear emergency planning and response in industrial areas. Results of a qualitative study in 9 industrial companies

    Energy Technology Data Exchange (ETDEWEB)

    Pauwels, N.; Hardeman, F.; Soudan, K

    1998-11-01

    Substantial economic losses and potential dangerous situations may result when industrial companies unexpectedly have to shut down their activities in an abrupt way. With respect to the industrial companies located in the Antwerp harbour region, the reason for such an unplanned shut-down could be the decision to (preventively) evacuate their workers, or to have them sheltered, in case of an alarm situation at a nearby nuclear power plant of Doel or in any other adjacent industrial factory. Between January and August 1998, the prevention advisors of nine industrial companies have been interviewed to gain insight in the scale and relative importance of several economic costs and practical difficulties that may arise. Moreover, the appropriateness of the existing nuclear emergency response decision structure and intervention philosophy was investigated. The main conclusions drawn from the interviews are reported. Recommendations are made to increase the efficiency of implementing countermeasures in industrial areas.

  2. Long-term airborne contamination studied by attic dust in an industrial area: Ajka, Hungary

    Science.gov (United States)

    Völgyesi, P.; Jordan, G.; Szabo, Cs.

    2012-04-01

    Heavy industrial activities such as mining, metal industry, coal fired power plants have produced large amount of by-products and wide-spread pollution, particularly in the period of centrally dictated economy after WWII, in Hungary. Several studies suggest that significant amount of these pollutants have been deposited in the urban environment. Nowadays, more than half of the world's population is living in urban areas and people spend almost 80% of their lives indoors in developed countries increasing human health risk due to contamination present in urban dwellings. Attic dust sampling was applied to determine the long-term airborne contamination load in the industrial town of Ajka (Hungary). There has been a high industrial activity in Ajka since the end of the 19th century. In addition to aluminum and alumina industry, coal mining, coal fired power plant and glass industry sites, generated numerous waste heaps which act as multi-contamination sources in the area. In October 2010 the Ajka red mud tailings pond failed and caused an accidental regional contamination of international significance. The major objective of this research was to study and map the spatial distribution of heavy metal contamination in airborne attic dust samples. At 27 sampling sites 30 attic dust samples were collected. Sampling strategy followed a grid-based stratified random sampling design. In each cell a house for attic dust sample collection was selected that was located the closest to a randomly generated point in the grid cell. The project area covers a 8x8 grid of 1x1 km cells with a total area of 64 km2. In order to represent long-term industrial pollution, houses with attics kept intact for at least 30-40 years were selected for sampling. Sampling included the collection of background samples remotely placed from the industrialized urban area. The concentration of the major and toxic elements (Al, Ca, Fe, K, Mg, Mn, Na, P, S, and As, Ba, Cd, Co, Cr, Cu, Li, Mo, Ni, Pb, Se, Sn

  3. Environmental exposure to arsenic and chromium in an industrial area

    OpenAIRE

    Vimercati, Luigi; Gatti, Maria F; Gagliardi, Tommaso; Cuccaro, Francesco; De Maria, Luigi; Caputi, Antonio; Quarato, Marco; Baldassarre, Antonio

    2017-01-01

    Arsenic and chromium are widespread environmental contaminants that affect global health due to their toxicity and carcinogenicity. To date, few studies have investigated exposure to arsenic and chromium in a population residing in a high-risk environmental area. The aim of this study is to evaluate the exposure to arsenic and chromium in the general population with no occupational exposure to these metals, resident in the industrial area of Taranto, Southern Italy, through biological monitor...

  4. The current state of taxation and regulation of land plot size of industrial areas in Ukraine

    Directory of Open Access Journals (Sweden)

    М.А. Malashevskyy

    2016-04-01

    Full Text Available An analysis of the domestic legal and regulatory framework for land taxation has been performed. The ratio of industry land within the land resources of Ukraine has been investigated. The legal basis for determination of land plot areas necessary for implementation of industrial activities has been considered. The legal regime of industry land has been investigated. The conclusion of the need for improvement of methods for determining excess areas for taxation purposes has been made and optimization of land use in populated areas.

  5. Method for Assessing the Integrated Risk of Soil Pollution in Industrial and Mining Gathering Areas

    Science.gov (United States)

    Guan, Yang; Shao, Chaofeng; Gu, Qingbao; Ju, Meiting; Zhang, Qian

    2015-01-01

    Industrial and mining activities are recognized as major sources of soil pollution. This study proposes an index system for evaluating the inherent risk level of polluting factories and introduces an integrated risk assessment method based on human health risk. As a case study, the health risk, polluting factories and integrated risks were analyzed in a typical industrial and mining gathering area in China, namely, Binhai New Area. The spatial distribution of the risk level was determined using a Geographic Information System. The results confirmed the following: (1) Human health risk in the study area is moderate to extreme, with heavy metals posing the greatest threat; (2) Polluting factories pose a moderate to extreme inherent risk in the study area. Such factories are concentrated in industrial and urban areas, but are irregularly distributed and also occupy agricultural land, showing a lack of proper planning and management; (3) The integrated risks of soil are moderate to high in the study area. PMID:26580644

  6. Method for Assessing the Integrated Risk of Soil Pollution in Industrial and Mining Gathering Areas.

    Science.gov (United States)

    Guan, Yang; Shao, Chaofeng; Gu, Qingbao; Ju, Meiting; Zhang, Qian

    2015-11-13

    Industrial and mining activities are recognized as major sources of soil pollution. This study proposes an index system for evaluating the inherent risk level of polluting factories and introduces an integrated risk assessment method based on human health risk. As a case study, the health risk, polluting factories and integrated risks were analyzed in a typical industrial and mining gathering area in China, namely, Binhai New Area. The spatial distribution of the risk level was determined using a Geographic Information System. The results confirmed the following: (1) Human health risk in the study area is moderate to extreme, with heavy metals posing the greatest threat; (2) Polluting factories pose a moderate to extreme inherent risk in the study area. Such factories are concentrated in industrial and urban areas, but are irregularly distributed and also occupy agricultural land, showing a lack of proper planning and management; (3) The integrated risks of soil are moderate to high in the study area.

  7. Eco-industrial zones in the context of sustainability development of urban areas.

    Science.gov (United States)

    Sacirovic, Selim; Ketin, Sonja; Vignjevic, Nada

    2018-03-04

    Industry is one of the main activities in the city and in many cities of the world, and the dominant industrial zones are the most significant morphological forms of concentration of industrial facilities in the city and are concentrated industrial and business activity. Industrial parks combine activities related to energy and resource consumption, emissions, waste generation, economic benefits, and regional development. The focus of this work is the path of transformation between the present and the vision of a sustainable city in the future. The problem and the subject of research related to two related objects of research: the city and sustainable development. In this paper, the co-author's industrial symbiosis parks, modern tendencies of the spatial distribution of productive activities, circular economy, to attract leading corporations and open the way for new ventures while preserving the living environment in an urban area.

  8. Area Factor Determinations for an Industrial Worker Exposed to a Concrete Slab End-State

    International Nuclear Information System (INIS)

    Jannik, G. Timothy; Lee, Patricia L.; Farfan, Eduardo B.; Roach, Jesse L.

    2008-01-01

    The U.S. Department of Energy's (DOE) Savannah River Site (SRS) is decommissioning many of its excess facilities through removal of the facility structures leaving only the concrete-slab foundations in place. Site-specific, risk-based derived concentration guideline levels (DCGLs) for radionuclides have been determined for a future industrial worker potentially exposed to residual contamination on these concrete slabs as described in Jannik. These risk-based DCGLs were estimated for an exposure area of 100 m 2 . During deactivation and decommissioning (D and D) operations at SRS, the need for area factors for larger and smaller contaminated areas arose. This paper compares the area factors determined for an industrial worker exposed to a concrete slab end-state for several radionuclides of concern at SRS with 1) the illustrative area factors provided in MARSSIM, 2) the area correction factors provided in the U.S. Environmental Protection Agency's (EPA) Soil Screening Guidance, and 3) the hot spot criterion for field application provided in the RESRAD User's Manual. The purpose of this site-specific assessment is to determine if any of the recommended area factors provided in the guidance documents could be utilized at SRS for field applications of the industrial worker DCGLs. Results show the area factors that were determined for an SRS industrial worker exposed to concrete slab end-states for the common radionuclides provided in the referenced guidance documents. In addition to the SRS site-specific area factors, the following area factors are provided for comparison: - Illustrative examples of outdoor area dose factors (MARSSIM); - Area correction factors as a function of source area (Soil Screening Guidance). Note: the area correction factors were inverted to correspond to a DCGL area factor. - Recommended area correction factors as a function of source area (Soil Screening Guidance); - Ranges for hot spot multiplication factors (RESRAD). As it can be seen

  9. Evolution of industrial wastewater pollution in the Barcelona Metropolitan Area; Evolucion de la contaminacion industrial en las aguas residuales del area metropolitana de Barcelona

    Energy Technology Data Exchange (ETDEWEB)

    Mantecon Pascual, R.

    2005-07-01

    The Environmental Agency of the Barcelona Metropolitan Area has full powers regarding sewerage. Industrial wastewater emptied into the public sewer system has been monitored and analysed since 1988. the data showing the evolution of the pollution in industrial wastewater are presented, broken down by activities and parameters. These data are based on the analysis of 14,528 samples taken during 19,555 inspections of 5,655 factories. It was found that there has been a gradual improvement in the quality of the effluents. Failure to meet the requirements concerning one or more of the physico-chemical parameters fell from 71% to 39% of the samples analysed. (Author)

  10. Postwar Industrial areas as agents for sustainable urban transformation

    DEFF Research Database (Denmark)

    Boye, Anne Mette

    2017-01-01

    Only 30-40 years old, postwar industrial enclaves in Denmark change character. Vacancies, new investments in high technology and new civic programs are recorded even within the same enclaves. These postwar industrial areas represent a generic typology – a legacy of the functionalistic paradigm sh...... international projects, the paper pinpoints a selection of spatial transformation strategies addressing uncertainty. Through this, the paper contributes to the discussion on how to recycle the postwar urban landscape and planning in uncertain conditions....... are cleared for redevelopment or ignored. However, both reactions dismiss the possible qualities of the existing morphology and activities. This paper argues that this might close an opportunity to consider how recycling these enclaves can be utilized to shape future sustainable urban environments...

  11. Estimation of heavy metals in dust fall samples from three different industrial areas of Karachi

    International Nuclear Information System (INIS)

    Hashmi, D.R.; Khan, F.A.; Shareef, A.; Bano, A.B.; Munshi, A.B.

    2010-01-01

    The study of accumulation of heavy metals, Fe, Cu, Mn, Zn, Pb and Cd, in the dust fall samples, collected from three selected industrial areas of Karachi, showed the level of heavy metals to decrease gradually from sites of high activity to those of low activity such as from roundabouts to main roads to side roads. Concentration of heavy metal showed a variation of the order Fe>Zn>Pb>Mn>Cu>Cd. Iron had the highest concentration in all the sampling areas in the range of 1.947 +- 0.00 to 30.039 +- 0.01 mg/g. Lower values were observed for Cd with respective ranges of 0.001 +- 0.00 to 0.009 +- 0.01 mg/g. The results suggested that heavy metal pollution in the dust fall samples of industrial areas may be due to automobile and industrial exhaust from different industrial units. (author)

  12. Heavy Metal In Food Ingredients In Oil Refi nery Industrial Area, Dumai

    Directory of Open Access Journals (Sweden)

    Dian Sundari

    2016-06-01

    Full Text Available Background: Industrial waste generally contains a lot of heavy metals such as Plumbum (Pb, Arsenic (As, Cadmium(Cd and Mercury (Hg, which can contaminate the surrounding environment and cause health problems. Bioaccumulation ofheavy metals from the environment can occur in foodstuffs. The study aims to determine levels of heavy metals Pb, Cd, Asand Hg in foodstuffs in the oil refi nery industry. Methods: The analytical method used Atomic Absorption Spectrophotometer(AAS. Samples were taken from two locations, namely: the exposed area and non exposed area. The sample consisted ofcassava, papaya leaves, fern leaves, cassava leaves, guava, papaya and catfi sh. Results: The analysis showed levels ofmetals As in all samples at exposed locations is below the maximum limit of SNI, the location is not exposed only in catfi shlevels of As (2.042 mg/kg exceeds the SNI. Cd levels of both locations are not detected. Pb levels in catfi sh in exposedlocations (1,109 mg/kg exceeds the SNI. Hg levels in leaves of papaya, cassava leaves, fern leaves, cassava and fruitpapaya exceed SNI. Conclusion: There has been a heavy metal contamination in foodstuffs. Recommendation: Thelocal people are advised to be careful when consuming food stuffs from oil refi nery industrial area.

  13. Changing industrial patterns in the metroplitan Chicago area

    Energy Technology Data Exchange (ETDEWEB)

    Allardice, D.

    1994-12-31

    The industrial base of Chicago, and most Midwestern cities, continues to change. These changes are particularly visible in the manufacturing sector where the exodus of companies has left behind abandoned factories and industrial sites that now blight the urban landscape. As urban centers have seen a steady decline in their ability to attract and maintain their manufacturing base, great interest has been placed in seeing what can be done to attract economic activity back into the urban center. For most Midwestern cities, this often means trying to either replace or stem the tide of manufacturing facilities that have left the city for {open_quotes}greenfields{close_quotes} in suburban or rural locations or have simply moved overseas. On the replacement front, to compensate for the loss of manufacturing, some cities such as Chicago have managed to expand other areas of their economies, such as business services, finance, and tourism and recreation to maintain their vitality. This paper discusses three aspects of the changing economic landscape of Chicago and other Midwestern urban areas. First, some historical perspective will be provided on how Chicago came to be a manufacturing center and what factors since World War II have led manufacturing facilities to move away from the urban center. Second, the future prospects for manufacturing in the central city will be examined. Finally, what policies may help increase (or at the very least maintain) the concentration of manufacturing in Chicago will be discussed.

  14. Changing industrial patterns in the metroplitan Chicago area

    International Nuclear Information System (INIS)

    Allardice, D.

    1994-01-01

    The industrial base of Chicago, and most Midwestern cities, continues to change. These changes are particularly visible in the manufacturing sector where the exodus of companies has left behind abandoned factories and industrial sites that now blight the urban landscape. As urban centers have seen a steady decline in their ability to attract and maintain their manufacturing base, great interest has been placed in seeing what can be done to attract economic activity back into the urban center. For most Midwestern cities, this often means trying to either replace or stem the tide of manufacturing facilities that have left the city for open-quotes greenfieldsclose quotes in suburban or rural locations or have simply moved overseas. On the replacement front, to compensate for the loss of manufacturing, some cities such as Chicago have managed to expand other areas of their economies, such as business services, finance, and tourism and recreation to maintain their vitality. This paper discusses three aspects of the changing economic landscape of Chicago and other Midwestern urban areas. First, some historical perspective will be provided on how Chicago came to be a manufacturing center and what factors since World War II have led manufacturing facilities to move away from the urban center. Second, the future prospects for manufacturing in the central city will be examined. Finally, what policies may help increase (or at the very least maintain) the concentration of manufacturing in Chicago will be discussed

  15. Radio transmission system for industrial area

    International Nuclear Information System (INIS)

    Iliescu, M.; Culcer, M.; Curuia, M.; Anghel, N.M.; Stefanescu, I.

    2003-01-01

    The paper deals with a data transmission system operating in a large, noisy industrial area. The radio transmission system permits data and commands communication between the local units of collecting data and a central monitoring and/or command station ( dispatch). The communication support are radio waves in the range 450 MHz. The transducers are of transmitter type, with 4-20 mA output signal, providing information about environmental and/or work parameters. Data are primarily acquisitioned in a data logger with microcontroller, then transmitted via a FSK radio modem and a radio station to the dispatch. Data logger can also be connected in a network. The dispatch personal computer receives and processes data and transmits commands. The system functioning is supervised by a communication software in MCS - 51 assembler and an application software in Visual C ++ . (author)

  16. Background radiation study of Offa industrial area of Kwara State ...

    African Journals Online (AJOL)

    A study of the external background radiation in Offa industrial area of Kwara State is hereby reported. An in-situ measurement using two Digilert radiation monitors at five different stations were carried out. A mean exposure rate of 0.0132mR/hr, which represents 20% elevation from the standard background radiation, was ...

  17. INDUSTRIAL AREA AS A BASIS FOR SPATIAL OPTIMIZATION OF LAND USE IN KIEV

    Directory of Open Access Journals (Sweden)

    Tsviakh О.

    2017-02-01

    Full Text Available In article deals with problem of using the urban land, including land under the industrial objects in Kiev. Also was analysed the ways of optimization the urban land using. Today become particularly acute the problem for efficient use of urban land use, including land for industrial facilities non-functioning as a reserve future development of Kyiv-based ecological-economic approach to solving them. However, to ensure sustainable development of urban population (preserve and improve health, improve working conditions, improve living conditions, increase the construction of social and affordable housing, reducing unemployment, creating new jobs, improving the ecological state of the environment within large cities , you need to identify ways to optimize existing urban land use. The complexity of management decisions is determined, above all, the fact that in most cities of Ukraine territorial resources are exhausted and vacant land plots require significant investment. Also, a significant proportion of non-functioning industrial enterprises, which occupy large areas in the city were in Kyiv surrounded by residential development, buffer zones, technogenic disturbed and contaminated land. These objects be removed outside the settlements and the land on which they are to be re-cultivated and restoration for more ecological, economically feasible and sustainable use. The rapid development of large cities around the world and increase their impact on the environment and society is accompanied by a set ekonominyh, environmental and social issues that significantly influence the development of land relations in settlements in general. Today in Kyiv observed the changing dynamics of land area, which is to reduce the share of agricultural and forestry purposes and to increase the territory of other categories. The process of de-industrialization and suburbanization of urban land use is inevitable. They in turn accelerate other processes - "crowding out

  18. Economical solution for the industrial waste problem of Karachi industrial area

    International Nuclear Information System (INIS)

    Mubin, S.

    2005-01-01

    The increased rate of industrialization coupled with rapid urbanization in Pakistan has given rise to serious water pollution and environmental problems. A vast range of industries has been established in the country during the last twenty five years, including tanneries, fertilizers, textiles, refineries, chemicals, vegetable oils, paper am pulp, sugar and food. Little attention was paid towards a large scale release of wastewater from these industries. Presently wastewater produced from these industries has been considered a serious problem and research in being conducted to solve its associated problems. Recently, it has been realized that there is a significant threat of water borne diseases, degradation of fresh water quality, environmental depletion and soil deterioration from the effluent and toxic emission of industries. Being a developing country and having limited resources, it is hard to install treatment plants on the industrial effluent with every industry before discharging them into streams which are also creating disturbance in natural ecosystem. An effort has been made to solve wastewater problem by implementing statistical tools on data of Karachi industrial state, obtained from EPA JICA and PCRWR, Islamabad. (author)

  19. Fuzzy logic applied to prospecting for areas for installation of wood panel industries.

    Science.gov (United States)

    Dos Santos, Alexandre Rosa; Paterlini, Ewerthon Mattos; Fiedler, Nilton Cesar; Ribeiro, Carlos Antonio Alvares Soares; Lorenzon, Alexandre Simões; Domingues, Getulio Fonseca; Marcatti, Gustavo Eduardo; de Castro, Nero Lemos Martins; Teixeira, Thaisa Ribeiro; Dos Santos, Gleissy Mary Amaral Dino Alves; Juvanhol, Ronie Silva; Branco, Elvis Ricardo Figueira; Mota, Pedro Henrique Santos; da Silva, Lilianne Gomes; Pirovani, Daiani Bernardo; de Jesus, Waldir Cintra; Santos, Ana Carolina de Albuquerque; Leite, Helio Garcia; Iwakiri, Setsuo

    2017-05-15

    Prospecting for suitable areas for forestry operations, where the objective is a reduction in production and transportation costs, as well as the maximization of profits and available resources, constitutes an optimization problem. However, fuzzy logic is an alternative method for solving this problem. In the context of prospecting for suitable areas for the installation of wood panel industries, we propose applying fuzzy logic analysis for simulating the planting of different species and eucalyptus hybrids in Espírito Santo State, Brazil. The necessary methodological steps for this study are as follows: a) agriclimatological zoning of different species and eucalyptus hybrids; b) the selection of the vector variables; c) the application of the Euclidean distance to the vector variables; d) the application of fuzzy logic to matrix variables of the Euclidean distance; and e) the application of overlap fuzzy logic to locate areas for installation of wood panel industries. Among all the species and hybrids, Corymbia citriodora showed the highest percentage values for the combined very good and good classes, with 8.60%, followed by Eucalyptus grandis with 8.52%, Eucalyptus urophylla with 8.35% and Urograndis with 8.34%. The fuzzy logic analysis afforded flexibility in prospecting for suitable areas for the installation of wood panel industries in the Espírito Santo State can bring great economic and social benefits to the local population with the generation of jobs, income, tax revenues and GDP increase for the State and municipalities involved. The proposed methodology can be adapted to other areas and agricultural crops. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Depositional history of sedimentary linear alkylbenzenes (LABs) in a large South American industrial coastal area (Santos Estuary, Southeastern Brazil)

    International Nuclear Information System (INIS)

    Martins, Cesar C.; Bicego, Marcia C.; Mahiques, Michel M.; Figueira, Rubens C.L.; Tessler, Moyses G.; Montone, Rosalinda C.

    2010-01-01

    This paper reports the reconstruction of the contamination history of a large South American industrial coastal area (Santos Estuary, Brazil) using linear alkylbenzenes (LABs). Three sediment cores were dated by 137 Cs. Concentrations in surficial layers were comparable to the midrange concentrations reported for coastal sediments worldwide. LAB concentrations increased towards the surface, indicating increased waste discharges into the estuary in recent decades. The highest concentration values occurred in the early 1970s, a time of intense industrial activity and marked population growth. The decreased LAB concentration, in the late 1970s was assumed to be the result of the world oil crisis. Treatment of industrial effluents, which began in 1984, was represented by decreased LAB levels. Microbial degradation of LABs may be more intense in the industrial area sediments. The results show that industrial and domestic waste discharges are a historical problem in the area. - The contamination history of a large South American industrial coastal area indicated by molecular indicator of sewage input.

  1. NO2 and SO2 dispersion modeling and relative roles of emission sources over Map Ta Phut industrial area, Thailand.

    Science.gov (United States)

    Chusai, Chatinai; Manomaiphiboon, Kasemsan; Saiyasitpanich, Phirun; Thepanondh, Sarawut

    2012-08-01

    Map Ta Phut industrial area (MA) is the largest industrial complex in Thailand. There has been concern about many air pollutants over this area. Air quality management for the area is known to be difficult, due to lack of understanding of how emissions from different sources or sectors (e.g., industrial, power plant, transportation, and residential) contribute to air quality degradation in the area. In this study, a dispersion study of NO2 and SO2 was conducted using the AERMOD model. The area-specific emission inventories of NOx and SO2 were prepared, including both stack and nonstack sources, and divided into 11 emission groups. Annual simulations were performed for the year 2006. Modeled concentrations were evaluated with observations. Underestimation of both pollutants was Jbund, and stack emission estimates were scaled to improve the modeled results before quantifying relative roles of individual emission groups to ambient concentration overfour selected impacted areas (two are residential and the others are highly industrialized). Two concentration measures (i.e., annual average area-wide concentration or AC, and area-wide robust highest concentration or AR) were used to aggregately represent mean and high-end concentrations Jbfor each individual area, respectively. For AC-NO2, on-road mobile emissions were found to be the largest contributor in the two residential areas (36-38% of total AC-NO2), while petrochemical-industry emissions play the most important role in the two industrialized areas (34-51%). For AR-NO2, biomass burning has the most influence in all impacted areas (>90%) exceptJor one residential area where on-road mobile is the largest (75%). For AC-SO2, the petrochemical industry contributes most in all impacted areas (38-56%). For AR-SO2, the results vary. Since the petrochemical industry was often identified as the major contributor despite not being the largest emitter, air quality workers should pay special attention to this emission group

  2. Quality index of the surface water of Amazonian rivers in industrial areas in Pará, Brazil.

    Science.gov (United States)

    Medeiros, Adaelson Campelo; Faial, Kleber Raimundo Freitas; do Carmo Freitas Faial, Kelson; da Silva Lopes, Iris Danielly; de Oliveira Lima, Marcelo; Guimarães, Raphael Mendonça; Mendonça, Neyson Martins

    2017-10-15

    In this study was to evaluate the waters quality of the Murucupi River, located in urban agglomerate area and intense industrial activity in Barcarena City, Pará State. The Arapiranga River in Abaetetuba City was used as control area (Background), next to Barcarena. Was used the Water Quality Index (WQI) based on nine variables analized. Waters quality of the Arapiranga and Murucupi rivers were regular to good and bad to good, respectively. Anthropogenic influence on the Murucupi River was higher, mainly by the disposal of domestic effluents from the urban agglomerate and of the industrial waste tailing basins upstream of this river. Due to its less inhabited environment and further away from the area urban and industrial, the Arapiranga River was more preserved. Waters pollution of around these area is increasingly intense, and restricted its uses for various purposes. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  3. Contribution of Fugitive Emissions for PM10 Concentrations in an Industrial Area of Portugal

    Science.gov (United States)

    Marta Almeida, Susana; Viana Silva, Alexandra; Garcia, Silvia; Miranda, Ana Isabel

    2013-04-01

    Significant atmospheric dust arises from the mechanical disturbance of granular material exposed to the air. Dust generated from these open sources is termed "fugitive" because it is not discharged to the atmosphere in a confined flow stream. Common sources of fugitive dust include unpaved roads, agricultural tilling operations, aggregate storage piles, heavy construction and harbor operations. The objective of this work was to identify the likeliness and extend of the PM10 limit value exceedences due to fugitive emissions in a particularly zone where PM fugitive emissions are a core of environmental concerns - Mitrena, Portugal. Mitrena, is an industrial area that coexists with a high-density urban region (Setúbal) and areas with an important environmental concern (Sado Estuary and Arrábida which belongs to the protected area Natura 2000 Network). Due to the typology of industry sited in Mitrena (e.g. power plant, paper mill, cement, pesticides and fertilized productions), there are a large uncontrolled PM fugitive emissions, providing from heavy traffic and handling and storage of raw material on uncover stockyards in the harbor and industries. Dispersion modeling was performed with the software TAPM (The Air Pollution Model) and results were mapped over the study area, using GIS (Geographic Information Systems). Results showed that managing local particles concentrations can be a frustrating affair because the weight of fugitive sources is very high comparing with the local anthropogenic stationary sources. In order to ensure that the industry can continue to meet its commitments in protecting air quality, it is essential to warrant that the characteristics of releases from all fugitive sources are fully understood in order to target future investments in those areas where maximum benefit will be achieved.

  4. Occupation and lung cancer in two industrialized areas of northern Italy

    Energy Technology Data Exchange (ETDEWEB)

    Ronco, G.; Ciccone, G.; Mirabelli, D.; Troia, B.; Vineis, P.

    1988-03-15

    A population-based case-control study on lung cancer was conducted in 2 industrialized areas of northern Italy. Cases (126) were all males who died from lung cancer between 1976 and 1980. Controls (384) were a random sample of males dying from other causes during the same period. Jobs held during working life have been analyzed according to a list of occupations already known to be causally associated with lung cancer (list A) and a list of occupations suspected of being so (list B). Attributable risk percentages in the population for occupations included in either list A or B were about 36% and 12% in the 2 areas. Welders or workers in industries in which welding is common showed elevated odds ratios: 2.9 for welders (95% CI 0.9-9.8); 4.9 (1.1-22.9) for structural metal workers; 11.4 (2.6-49.9) for workers in structural metal production. Other job categories associated with lung cancer included: electricians and workers in electrical machine production, woodworkers (in furniture or cabinet making, but not in carpentry or joinery) and cleaning services. Smoking did not seem to exert a substantial confounding effect. Attributable risk percentages for tobacco smoking were about 78% and 76% in the population of the 2 areas.

  5. Occupation and lung cancer in two industrialized areas of northern Italy.

    Science.gov (United States)

    Ronco, G; Ciccone, G; Mirabelli, D; Troia, B; Vineis, P

    1988-03-15

    A population-based case-control study on lung cancer was conducted in 2 industrialized areas of northern Italy. Cases (126) were all males who died from lung cancer between 1976 and 1980. Controls (384) were a random sample of males dying from other causes during the same period. Jobs held during working life have been analyzed according to a list of occupations already known to be causally associated with lung cancer (list A) and a list of occupations suspected of being so (list B). Attributable risk percentages in the population for occupations included in either list A or B were about 36% and 12% in the 2 areas. Welders or workers in industries in which welding is common showed elevated odds ratios: 2.9 for welders (95% CI 0.9-9.8); 4.9 (1.1-22.9) for structural metal workers; 11.4 (2.6-49.9) for workers in structural metal production. Other job categories associated with lung cancer included: electricians and workers in electrical machine production, woodworkers (in furniture or cabinet making, but not in carpentry or joinery) and cleaning services. Smoking did not seem to exert a substantial confounding effect. Attributable risk percentages for tobacco smoking were about 78% and 76% in the population of the 2 areas.

  6. Polybrominated diphenyl ethers in water, sediment, soil, and biological samples from different industrial areas in Zhejiang, China

    International Nuclear Information System (INIS)

    Wang, Junxia; Lin, Zhenkun; Lin, Kuangfei; Wang, Chunyan; Zhang, Wei; Cui, Changyuan; Lin, Junda; Dong, Qiaoxiang; Huang, Changjiang

    2011-01-01

    Highlights: ► We examined PBDE concentrations in various matrices from different industrial areas. ► Elevated PBDE levels were found in areas with low-voltage electrical manufactures. ► Areas with e-waste recycling activities also had higher PBDE concentrations. ► PBDE content and composition in water samples varied from one area to another. ► PBDE composition in sediment/soil and biological samples was predominated by BDE-209. - Abstract: Polybrominated diphenyl ethers (PBDEs) have been used extensively in electrical and electronic products, but little is known about their distribution in the environment surrounding the manufacturing factories. This study reports PBDE contamination in various matrices from the location (Liushi, Zhejiang province) that produces more than 70% of the low-voltage electrical appliances in China. Additionally, PBDE contamination was compared with other industries such as the e-waste recycling business (Fengjiang) in the same region. Specifically, we measured seven PBDE congeners (BDEs – 47, 99, 100, 153, 154, 183, and 209) in water, sediment, soil, plant, and animal tissues from four different areas in this region. The present study revealed elevated PBDE concentrations in all matrices collected from Liushi and Fengjiang in comparison with highly industrialized areas without significant PBDE contamination sources. In water samples, there were large variations of PBDE content and composition across different areas. In sediment/soil and biological samples, BDE-209 was the predominant congener and this could be due to the abundant usage of deca-BDE mixtures in China. Our findings provide the very first data on PBDE contamination in the local environments surrounding the electronics industry, and also reveal widespread PBDE contamination in highly industrialized coastal regions of China.

  7. Discrimination of Settlement and Industrial Area Using Landscape Metrics in Rural Region

    Directory of Open Access Journals (Sweden)

    Xinyu Zheng

    2016-10-01

    Full Text Available Detailed and precise information of land-use and land-cover (LULC in rural area is essential for land-use planning, environment and energy management. The confusion in mapping residential and industrial areas brings problems in energy management, environmental management and sustainable land use development. However, they remain ambiguous in the former rural LULC mapping, and this insufficient supervision leads to inefficient land exploitation and a great waste of land resources. Hence, the extent and area of residential and industrial cover need to be revealed urgently. However, spectral and textural information is not sufficient for classification heterogeneity due to the similarity between different LULC types. Meanwhile, the contextual information about the relationship between a LULC feature and its surroundings still has potential in classification application. This paper attempts to discriminate settlement and industry area using landscape metrics. A feasible classification scheme integrating landscape metrics, chessboard segmentation and object-based image analysis (OBIA is proposed. First LULC map is generated from GeoEye-1 image, which delineated distribution of different land-cover materials using traditional OBIA method with spectrum and texture information. Then, a chessboard segmentation of the whole LULC map is conducted to create landscape units in a uniform spatial area. Landscape characteristics in each square of chessboard are adopted in the classification algorithm subsequently. To analyze landscape unit scale effect, a variety of chessboard scales are tested, with overall accuracy ranging from 75% to 88%, and Kappa coefficient from 0.51 to 0.76. Optimal chessboard scale is obtained through accuracy assessment comparison. This classification scheme is then compared to two other approaches: a top-down hierarchical classification network using only spectral, textural and shape properties, and lacunarity based hierarchical

  8. Emergy-based comparative analysis on industrial clusters: economic and technological development zone of Shenyang area, China.

    Science.gov (United States)

    Liu, Zhe; Geng, Yong; Zhang, Pan; Dong, Huijuan; Liu, Zuoxi

    2014-09-01

    In China, local governments of many areas prefer to give priority to the development of heavy industrial clusters in pursuit of high value of gross domestic production (GDP) growth to get political achievements, which usually results in higher costs from ecological degradation and environmental pollution. Therefore, effective methods and reasonable evaluation system are urgently needed to evaluate the overall efficiency of industrial clusters. Emergy methods links economic and ecological systems together, which can evaluate the contribution of ecological products and services as well as the load placed on environmental systems. This method has been successfully applied in many case studies of ecosystem but seldom in industrial clusters. This study applied the methodology of emergy analysis to perform the efficiency of industrial clusters through a series of emergy-based indices as well as the proposed indicators. A case study of Shenyang Economic Technological Development Area (SETDA) was investigated to show the emergy method's practical potential to evaluate industrial clusters to inform environmental policy making. The results of our study showed that the industrial cluster of electric equipment and electronic manufacturing produced the most economic value and had the highest efficiency of energy utilization among the four industrial clusters. However, the sustainability index of the industrial cluster of food and beverage processing was better than the other industrial clusters.

  9. Polybrominated diphenyl ethers in water, sediment, soil, and biological samples from different industrial areas in Zhejiang, China

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Junxia; Lin, Zhenkun [Zhejiang Provincial Key Lab for Technology and Application of Model Organisms, Institute of Watershed Science and Environmental Ecology, Wenzhou Medical College, Wenzhou 325035 (China); Lin, Kuangfei [School of Resources and Environmental Engineering, East China University of Science and Technology/State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, Shanghai 200237 (China); Wang, Chunyan [Zhejiang Provincial Key Lab for Technology and Application of Model Organisms, Institute of Watershed Science and Environmental Ecology, Wenzhou Medical College, Wenzhou 325035 (China); Zhang, Wei [School of Resources and Environmental Engineering, East China University of Science and Technology/State Environmental Protection Key Laboratory of Environmental Risk Assessment and Control on Chemical Process, Shanghai 200237 (China); Cui, Changyuan [Zhejiang Provincial Key Lab for Technology and Application of Model Organisms, Institute of Watershed Science and Environmental Ecology, Wenzhou Medical College, Wenzhou 325035 (China); Lin, Junda [Department of Biological Sciences, Florida Institute of Technology, Melbourne, FL 32901 (United States); Dong, Qiaoxiang, E-mail: dqxdong@163.com [Zhejiang Provincial Key Lab for Technology and Application of Model Organisms, Institute of Watershed Science and Environmental Ecology, Wenzhou Medical College, Wenzhou 325035 (China); Huang, Changjiang, E-mail: cjhuang5711@163.com [Zhejiang Provincial Key Lab for Technology and Application of Model Organisms, Institute of Watershed Science and Environmental Ecology, Wenzhou Medical College, Wenzhou 325035 (China)

    2011-12-15

    Highlights: Black-Right-Pointing-Pointer We examined PBDE concentrations in various matrices from different industrial areas. Black-Right-Pointing-Pointer Elevated PBDE levels were found in areas with low-voltage electrical manufactures. Black-Right-Pointing-Pointer Areas with e-waste recycling activities also had higher PBDE concentrations. Black-Right-Pointing-Pointer PBDE content and composition in water samples varied from one area to another. Black-Right-Pointing-Pointer PBDE composition in sediment/soil and biological samples was predominated by BDE-209. - Abstract: Polybrominated diphenyl ethers (PBDEs) have been used extensively in electrical and electronic products, but little is known about their distribution in the environment surrounding the manufacturing factories. This study reports PBDE contamination in various matrices from the location (Liushi, Zhejiang province) that produces more than 70% of the low-voltage electrical appliances in China. Additionally, PBDE contamination was compared with other industries such as the e-waste recycling business (Fengjiang) in the same region. Specifically, we measured seven PBDE congeners (BDEs - 47, 99, 100, 153, 154, 183, and 209) in water, sediment, soil, plant, and animal tissues from four different areas in this region. The present study revealed elevated PBDE concentrations in all matrices collected from Liushi and Fengjiang in comparison with highly industrialized areas without significant PBDE contamination sources. In water samples, there were large variations of PBDE content and composition across different areas. In sediment/soil and biological samples, BDE-209 was the predominant congener and this could be due to the abundant usage of deca-BDE mixtures in China. Our findings provide the very first data on PBDE contamination in the local environments surrounding the electronics industry, and also reveal widespread PBDE contamination in highly industrialized coastal regions of China.

  10. Monitoring persistent organic pollutants in an industrial area of Tarragona (Catalonia, Spain)

    Energy Technology Data Exchange (ETDEWEB)

    Nadal, M.; Schuhmacher, M.; Domingo, J.L. [Rovira i Virgili University, Reus (Spain)

    2004-09-15

    It is well known that combustion of different materials is one of the most important sources of environmental contamination by persistent organic pollutants (POPs). Therefore, environments affected by this kind of processes should be strictly controlled. In relation to it, the 2001 Stockholm Convention for the regulation of POPs was undertaken in order to establish agreements and mechanisms to erase the release of 12 POPs on a global scale. While polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) and polychlorinated biphenyls (PCBs) were included in this list, other pollutants such as polychlorinated naphthalenes (PCNs) and polycyclic aromatic hydrocarbons (PAHs) can be added in a near future. Since more than 30 years ago, one of the largest chemical and petrochemical industrial complexes in Southern Europe is located in Tarragona County (Catalonia, Spain). Several chemical industries (such as a PVC production facility and a chlor-alkali plant) and a big oil refinery are located in this residential area (up to 300,000 inhabitants), together with a municipal solid waste incinerator (MSWI) and a hazardous waste incinerator (HWI). Moreover, the presence of a highway and several roads with an important traffic density influences also the environment of the zone. The current study is a preliminary investigation to assess the levels of several POPs (PCDD/Fs, PCBs, PCNs and PAHs) in soil and vegetation samples collected in Tarragona's industrial and residential areas and to compare them with data obtained in unpolluted sites as well as in other industrial and residential zones.

  11. Isocyanatocyclohexane and isothiocyanatocyclohexane levels in urban and industrial areas and possible emission-related activities

    Science.gov (United States)

    Gallego, E.; Roca, F. X.; Perales, F.; Ribes, A.; Carrera, G.; Guardino, X.; Berenguer, M. J.

    Isocyanatocyclohexane and isothiocyanatocyclohexane are becoming relevant compounds in urban and industrial air, as they are used in important amounts in automobile industry and building insulation, as well as in the manufacture of foams, rubber, paints and varnishes. Glass multi-sorbent tubes (Carbotrap, Carbopack, Carboxen) were connected to LCMA-UPC pump samplers for the retention of iso- and isothiocyanatocyclohexanes. The analysis was performed by automatic thermal desorption (ATD) coupled with capillary gas chromatography (GC)/mass spectrometry detector (MSD). TD-GC/MS was chosen as analytical method due to its versatility and the possibility of analysis of a wide range of volatility and polarity VOC in air samples. The method was satisfactory sensitive, selective and reproducible for the studied compounds. The concentrations of iso- and isothioisocyanatocyclohexanes were evaluated in different urban, residential and industrial locations from extensive VOC air quality and odour episode studies in several cities in the Northeastern edge of Spain. Around 200-300 VOC were determined qualitatively in each sample. Higher values of iso- and isothiocyanatocyclohexane were found in industrial areas than in urban or residential locations. The concentrations ranged between n.d.-246 and n.d.-29 μg m -3 for isocyanatocyclohexane and isothiocyanatocyclohexane, respectively, for industrial areas. On the other hand, urban and residential locations showed concentrations ranging between n.d.-164 and n.d.-29 μg m -3 for isocyanatocyclohexane and isothiocyanatocyclohexane, respectively. The site location (urban or industrial), the kind and nearness of possible iso- and isothiocyanatocyclohexane emission activities (industrial or building construction) and the changes of wind regimes throughout the year have been found the most important factors influencing the concentrations of these compounds in the different places.

  12. Some of physiological and biochemical responses of Prunus amygdalus to air pollution of the Shazand industrial area

    Directory of Open Access Journals (Sweden)

    Mehri Askari Mehrabadi

    2016-06-01

    Full Text Available In today's world where human life is dependent on the industry, the problems impose in the human life along with theachievement of growing in the field of industrial works. One of the challenging problems is entry of pollutants into air that has the destructive effects on human life and environment especially plants. Plants show different responses against the air pollutants. Plant responses can be vary due to climate, geography and plant species. In this study, the effects of air pollutants in the Shazand industrial area (refinery, petrochemical and thermal power stationin Markazi province has been checked on almond. For this purpose, the leaves of almond in Haftadgholle (control area, Shazand (closest city to industrial zone and Kazaz (adjacent industrial zone were collected. Also, soil samples were collected from three areas to determine lead and zinc amounts in soil. Results showed that proline, sulfur, heavy metals (lead and zinc and lipid peroxidation enhanced significantly in Kazaz and Shazand in compared with Haftadgholle, while antioxidant activity of catalase, superoxide dismutase and guaicol peroxidase didn’t significant changes in three areas. The increase of sulfur amount in leaves, lead and zinc in soil of the Kazaz and Shazand regions could be one of the reasons to prove the presence of pollutants in these areas. The increase of lipid peroxidation indicative plant damage against the air pollution. The plant defense mechanism against of stress is the increase of non-enzymatic antioxidant proline. No change in chlorophylls and protein contents reflects increased resistance to the stress.

  13. Analysis of the special consequences of the Barij essence industrial complex of Kashan in the development of neighboring rural areas

    Directory of Open Access Journals (Sweden)

    Mohsen Shaterian

    2017-04-01

    Full Text Available In the late decades, the development of industrial activities in the rural areas of Iran have caused some changes in different aspects of these areas which influence the special patterns of rural areas. This article aims to identify the changes that have been the results of industrial development and it’s reflection in the development of rural residential areas. The main intention of this study is to analyze the special consequences (economic, social and anatomical of the industrial center of Kashan in the development of neighboring rural areas. The industrial center consists of three factories that are for making essence, making equipment for gardeners and distillers and the Barij Company. All of the above companies are called the Industrial Center of Barij Essence. It has employed 1050 workers from amongst whom 120 people were identified and the questionnaires were randomly distributed among these workers. To analyze the data based on the measurement variables, descriptive and analytic methods (T were used. The results showed that economically, having rural industries has led to an increase in the people’s intake of  calories, seeing more consumption in long lasting goods and more satisfaction in the native people of the area. In addition, there is more social involvement,  improvements in not wasting the residents’ free time, decreasing of  natives immigration out of the rural areas and finally anatomically, quantity and quality improvement in the rural houses.

  14. Comparative study of the growth and carbon sequestration potential of Bermuda grass in industrial and urban areas

    Directory of Open Access Journals (Sweden)

    Usman Ali

    2018-06-01

    Full Text Available Climate change is a global phenomenon occurring throughout the world. Greenhouse gases (GHGs especially carbon dioxide (CO2 considered to be the major culprit to bring these changes. So, carbon (C sequestration by any mean could be useful to reduce the CO2 level in atmosphere. Turf grasses have the ability to sequester C and minimize the effects of GHGs on the environment. In order to study that how turf grasses can help in C sequestration, Bermuda grass (Cynodon dactylon was grown both at industrial and urban location and its effect on C storage were assessed by soil and plant analysis. Dry deposition of ammonium and nitrate was maximum at both locations through the year. However wet deposition was highest during the months of high rainfall. It was examined through soil analysis that soil organic matter, soil C and nitrogen in both locations increased after second mowing of grass. However, soil pH 6.68 in urban and 7.00 in industrial area and EC 1.86 dS/m in urban and 1.90 dS/m in industrial area decreased as the grass growth continue. Soil fresh weight (27.6 g in urban and (27.28 g industrial area also decreased after first and second mowing of grass. The C levels in plant dry biomass also increased which showed improved ability of plant to uptake C from the soil and store it. Similarly, chlorophyll contents were more in industrial area compared to urban area indicates the positive impact of high C concentration. Whereas stomatal conductance was reduced in high C environment to slow down respiration process. Hence, from present study it can be concluded that the Bermuda grass could be grown in areas with high C concentration in atmosphere for sequestrating C in soil.

  15. Life Cycle Assessment of waste management systems in Italian industrial areas: Case study of 1st Macrolotto of Prato

    International Nuclear Information System (INIS)

    Tarantini, Mario; Loprieno, Arianna Dominici; Cucchi, Eleonora; Frenquellucci, Ferdinando

    2009-01-01

    Life Cycle Assessment (LCA) is not widely used as a decision-supporting tool in Italy, despite recent European Commission policies fostering its adoption to achieve an energy- and resource-efficient economy. In this paper, an LCA of waste management system of the 1st Macrolotto industrial area is presented. The aims of the study were to identify the environmental critical points of the system and to evaluate opportunities and problems in applying this methodology at industrial area level. After a description of the waste management system of the 1st Macrolotto industrial area, the main assumptions of the study and some elements of the system modelling are presented. Results confirmed that door-to-door separated collection and packaging recycling are successful strategies for reducing the use of natural resources. The cooperation of the waste management company, which was part of the area management structure, was strategic for the completion of the analysis. Country-specific databases and models should be developed for a widespread application of the LCA methodology to waste management in Italian industrial areas.

  16. Levels and isomer profiles of Dechlorane Plus in the surface soils from e-waste recycling areas and industrial areas in South China

    Energy Technology Data Exchange (ETDEWEB)

    Yu Zhiqiang [State Key Laboratory of Organic Geochemistry, Guangdong Key Laboratory of Environment and Resources, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Lu Shaoyou; Gao Shutao; Wang Jingzhi [State Key Laboratory of Organic Geochemistry, Guangdong Key Laboratory of Environment and Resources, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Graduate School of the Chinese Academy of Sciences, Beijing 100039 (China); Li Huiru, E-mail: huiruli@gig.ac.c [State Key Laboratory of Organic Geochemistry, Guangdong Key Laboratory of Environment and Resources, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China); Zeng Xiangying; Sheng Guoying; Fu Jiamo [State Key Laboratory of Organic Geochemistry, Guangdong Key Laboratory of Environment and Resources, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, Guangzhou 510640 (China)

    2010-09-15

    Dechlorane Plus (DP) is a highly chlorinated flame retardant. Levels of DP were measured in surface soils from e-waste recycling areas and industrial areas in South China. Higher DP levels were found in e-waste recycling areas (undetectable-47.4 ng/g) than those in industrial areas (0.0336-4.65 ng/g) in South China. The highest DP concentration (3327 ng/g) was found at the e-waste recycling site in Qingyuan, while DP levels fell dramatically with increasing distance away from the recycling site, suggesting that the e-waste recycling activities are an important source of DP emissions. The mean ratios of anti-DP to total DP (f{sub anti}) for different sampling areas ranged from 0.58 to 0.76 and showed no significant difference from the ratio for the technical DP products (t-test, p > 0.05). Further intensive studies are needed to investigate the process of DP degradation and its degradation products. - High DP concentrations were found in the soils from e-waste recycling regions, and e-waste recycling was the major source of DP emissions in South China.

  17. Environmental pollution study around a large industrial area near Cairo, Egypt

    International Nuclear Information System (INIS)

    Abdel-Halim, A.S.

    2003-01-01

    Neutron activation analysis is one of the most extensively used methods for environmental studies due to its high sensitivity, precision, versatility and multielemental character. Cement factories at Helwan, south of Cairo, contribute substantially to environmental pollution. Determination of minor and trace-elements in dust particulates from the cement industrial areas has been performed to assess the air quality from an environmental and human health point of view. Soil-7 standard reference material from IAEA and SRM-1571 from NBS were used for quality assurance testing. The data obtained indicate there is an indication that the pollution could be hazardous to people living in and around the area surveyed. (author)

  18. Comparison of DDT and its metabolites concentrations in cow milk from agricultural and industrial areas.

    Science.gov (United States)

    Kuba, Jarosław; Tomza-Marciniak, Agnieszka; Pilarczyk, Bogumiła; Tarasewicz, Natalia; Pilarczyk, Renata; Ligocki, Marek

    2015-01-01

    The risk of pesticidal intoxication in humans is severe, especially because of the strongly negative impact on human health. The consequences of the exposure to these substances may include cancerogenesis or endocrine abnormalities resulting for example in decreased fertility. Therefore, the aim of our study was to evaluate the content of dichlorodiphenyltrichloroethane (DDT) and its metabolites in cow milk from two regions of Poland, varying by level of industrialization. Samples were collected from agricultural (n = 25) and industrial (n = 25) areas, and the concentrations of DDT and its metabolites were evaluated by gas chromatography. Residues of DDT were detected in all the milk samples tested, mostly in the samples from the agricultural area, where a total DDT median concentration reached 0.336 μg L(-1). In the milk samples from the industrial area, the median concentration was lower, at 0.131 μg L(-1). 4,4'-DDT was the main metabolite, constituting 83% of total DDT metabolites. Although none of the samples exceeded the level above which they should be considered dangerous, the results showed that the problem of DDT had not diminished and so should be constantly monitored.

  19. Spatial clustering of knowledge-based industries in the Helsinki Metropolitan Area

    Directory of Open Access Journals (Sweden)

    Juan Eduardo Chica

    2016-01-01

    Full Text Available The central locations of metropolitan areas have some specific attributes, leading to an accumulation of large knowledge exchanges and extensive knowledge externalities, which encourage the concentration of various economic activities, especially knowledge-based industries (KBI. Other agglomeration economies found in metropolitan areas – such as telecommunications and transport infrastructures connected to global productive circuits and complementary labour markets – are key factors for KBI employment growth. This paper explores the Helsinki Metropolitan Area’s (HMA spatial clustering of KBI at the sub-district level, and the role played by agglomeration economies (both specialization and diversity economies in fostering this process. The results reveal that KBI employment shows patterns of concentration in the core and adjacent areas. The specialization and diversity economies found in the metropolitan core and the specialization economies found in others areas lead to KBI spatial clustering in the HMA. Public policies regarding the promotion of science parks have also played a decisive role.

  20. Providing Public Space Continuities in Post-Industrial Areas through Remodelling Land/Water Connections

    Science.gov (United States)

    Burda, Izabela M.; Nyka, Lucyna

    2017-10-01

    This article examines the problem of urban transformation strategies applied in recent years which are based on the creation of new water areas and modification of existing ones. The research is an attempt to prove that modifications of plans of water areas and forms of their borders may play an important role in achieving the best quality public spaces in post-industrial territories. The basis for demonstrating the importance of modifying water borders, and introducing new forms of water-based structures in cities, are theoretical surveys, comparative studies and in-field analyses. It can be seen that post-industrial areas, which used to create voids in the urban fabric, can be perceived as unique but isolated places that should be integrated into the layout of cities. Thus, creating continuity of public spaces that will relate converted areas to their surroundings is a well-known objective of many transformation strategies. This research proves that an effective strategy toward achieving this goal can be based on the modification of relationships between land and water. Namely, the introduction of new water areas, designing new pieces of land that protrude into the water, softening the boundaries of water lines or the opposite, like structuring smaller water flows into well-defined canals, may significantly contribute to the quality of public spaces. As such, all of this fosters the development of sustainable cities and contributes significantly to the emergence of high-quality urban landscapes.

  1. Wind energy in industrial areas optional, but not obvious. A study on the chances and constraints for the use of wind energy in industrial parks

    International Nuclear Information System (INIS)

    Schoolderman, J.A.; Verbeet, E.; Jochems, A.; Versteeg, K.

    2000-06-01

    The feasibility of installing wind turbines in industrial parks in the Netherlands has been investigated. An overview is given of possibilities and constraints to fit in wind turbines in industrial areas, based on the results of a literature study, a market consultation of sectoral organizations, representatives of local industrial circles and industrial experts in the field of renewable energy. Also a telephone survey was carried out among 130 entrepreneurs in the Netherlands to determine their attitudes towards the use of sustainable energy and wind energy in industrial parks. The results of the attitude study are published in a separate report for which a separate abstract has been prepared. The intermediate results were discussed at a meeting (23 February 2000), in which representatives from the industry, provinces, municipalities and the government participated

  2. Distribution to heavy metals in sediments of the Venice Lagoon: The role of the industrial area

    International Nuclear Information System (INIS)

    Frignani, M.; Bellucci, L.G.; Ravanelli, M.; Paolucci, D.

    1999-01-01

    The Venice Lagoon has been heavily polluted both from diffuse and direct sources. It has been recently established that the atmospheric delivery of contaminants to the lagoon can be very significant in zones far from direct sources, but the influence of the industrial area of Porto Marghera, though widely recognized, has not been entirely described and quantified. In order to assess the temporal and spatial variability of metal pollution, and to better understand the contribution of the industrial channels as sources of contaminants, in May 1996 we sampled 18 stations in the lagoon and 9 in the channels of the industrial area of Porto Marghera. At each site a short core, 10 cm long, was taken and immediately extruded to obtain 4 slices 2-2.5 cm thick. Sediment samples have been analysed for As, Cd, Pb, and Zn after acid extraction

  3. Analysis of phthalate esters in soils near an electronics manufacturing facility and from a non-industrialized area by gas purge microsyringe extraction and gas chromatography

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Wei [MOE Key Laboratory of Environment and Health, Institute of Environmental Medicine, School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, Hubei (China); Hu, Jia [Suzhou Center for Disease Prevention and Control, Suzhou, Jiangsu (China); Wang, Jinqi; Chen, Xuerong; Yao, Na [MOE Key Laboratory of Environment and Health, Institute of Environmental Medicine, School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, Hubei (China); Tao, Jing, E-mail: jingtao1982@126.com [MOE Key Laboratory of Environment and Health, Institute of Environmental Medicine, School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, Hubei (China); Zhou, Yi-Kai, E-mail: zhouyk@mails.tjmu.edu.cn [MOE Key Laboratory of Environment and Health, Institute of Environmental Medicine, School of Public Health, Tongji Medical College, Huazhong University of Science and Technology, Wuhan, Hubei (China)

    2015-03-01

    Here, a novel technique is described for the extraction and quantitative determination of six phthalate esters (PAEs) from soils by gas purge microsyringe extraction and gas chromatography. Recovery of PAEs ranged from 81.4% to 120.3%, and the relative standard deviation (n = 6) ranged from 5.3% to 10.5%. Soil samples were collected from roadsides, farmlands, residential areas, and non-cultivated areas in a non-industrialized region, and from the same land-use types within 1 km of an electronics manufacturing facility (n = 142). Total PAEs varied from 2.21 to 157.62 mg kg{sup −1} in non-industrialized areas and from 8.63 to 171.64 mg kg{sup −1} in the electronics manufacturing area. PAE concentrations in the non-industrialized area were highest in farmland, followed (in decreasing order) by roadsides, residential areas, and non-cultivated soil. In the electronics manufacturing area, PAE concentrations were highest in roadside soils, followed by residential areas, farmland, and non-cultivated soils. Concentrations of dimethyl phthalate (DMP), diethyl phthalate (DEP), and di-n-butyl phthalate (DnBP) differed significantly (P < 0.01) between the industrial and non-industrialized areas. Principal component analysis indicated that the strongest explanatory factor was related to DMP and DnBP in non-industrialized soils and to butyl benzyl phthalate (BBP) and DMP in soils near the electronics manufacturing facility. Congener-specific analysis confirmed that diethylhexyl phthalate (DEHP) was a predictive indication both in the non-industrialized area (r{sup 2} = 0.944, P < 0.01) and the industrialized area (r{sup 2} = 0.860, P < 0.01). The higher PAE contents in soils near the electronics manufacturing facility are of concern, considering the large quantities of electronic wastes generated with ongoing industrialization. - Highlights: • A new method for determining phthalate esters in soil samples was developed. • Investigate six phthalates near an industry and a

  4. The potential for ore and industrial minerals in the Forsmark area

    Energy Technology Data Exchange (ETDEWEB)

    Lindroos, Hardy [MIRAB Mineral Resurser AB, Uppsala (Sweden); Isaksson, Hans; Thunehed, Hans [GeoVista AB, Luleaa (Sweden)

    2004-03-01

    A survey has been made of existing information concerning the potential for ore and industrial minerals in and near the candidate area for a deep repository in Forsmark. A deep repository for spent nuclear fuel should not be located in a rock type or an area where mineral extraction might be considered in the future, since this would make it impossible to exploit this natural resource. Avoiding such areas reduces the risk that people in the future will come into contact with the deep repository through mineral prospecting or mining activities. The survey has made use of all the geoscientific information that was compiled in the more regional investigations in Oesthammar Municipality in 1996-97. In cooperation with the Geological Survey of Sweden (SGU), a new, more detailed mineral resources map has been prepared. The map shows areas with an ore potential that may be unsuitable or unfavourable for siting of a deep repository. The results of the recently completed geophysical helicopter surveys of the Forsmark area are presented in a special chapter. The judgement of the area's ore potential is in part based on the geophysical evaluation of these measurements. Furthermore, the survey obtained information from ongoing deep drillings from the site investigation in Forsmark. In order to better be able to judge the ore potential, the survey has initiated a geochemical investigation of activated soil samples, plus an ore geology sampling of a section in the deep borehole KFM02A, where a hydrothermally altered zone was detected in 2003.The first results from these samplings are presented in the report, which also discusses prospecting efforts in the area as well as relevant Swedish mining legislation. Some suggestions are made for further ore geology investigations. The mineral resources map shows that there is an elongate northwest-southeast zone south and southwest of the candidate area which has a potential for skarn iron ore, and possibly for copper and zinc

  5. The potential for ore and industrial minerals in the Forsmark area

    International Nuclear Information System (INIS)

    Lindroos, Hardy; Isaksson, Hans; Thunehed, Hans

    2004-03-01

    A survey has been made of existing information concerning the potential for ore and industrial minerals in and near the candidate area for a deep repository in Forsmark. A deep repository for spent nuclear fuel should not be located in a rock type or an area where mineral extraction might be considered in the future, since this would make it impossible to exploit this natural resource. Avoiding such areas reduces the risk that people in the future will come into contact with the deep repository through mineral prospecting or mining activities. The survey has made use of all the geoscientific information that was compiled in the more regional investigations in Oesthammar Municipality in 1996-97. In cooperation with the Geological Survey of Sweden (SGU), a new, more detailed mineral resources map has been prepared. The map shows areas with an ore potential that may be unsuitable or unfavourable for siting of a deep repository. The results of the recently completed geophysical helicopter surveys of the Forsmark area are presented in a special chapter. The judgement of the area's ore potential is in part based on the geophysical evaluation of these measurements. Furthermore, the survey obtained information from ongoing deep drillings from the site investigation in Forsmark. In order to better be able to judge the ore potential, the survey has initiated a geochemical investigation of activated soil samples, plus an ore geology sampling of a section in the deep borehole KFM02A, where a hydrothermally altered zone was detected in 2003.The first results from these samplings are presented in the report, which also discusses prospecting efforts in the area as well as relevant Swedish mining legislation. Some suggestions are made for further ore geology investigations. The mineral resources map shows that there is an elongate northwest-southeast zone south and southwest of the candidate area which has a potential for skarn iron ore, and possibly for copper and zinc, although

  6. Radiological protection in the industrial area

    International Nuclear Information System (INIS)

    Fraga, H.

    2008-12-01

    Radiation protection (RP) in industrial applications is composed of four major themes that are recruiting and training personnel, equipment and instrumentation, materials used and also the acquisition of new technologies to improve their own RP. To carry out the recruitment of staff and train them to serve as occupationally exposed personnel in the industry continues with the Mexican Official Standard NOM-031-NUCL-1999, R equirements for qualification and training of personnel occupationally exposed to radiation ionizing , what will be done regarding the physical fitness of personnel by NOM-026-NUCL-1999, M edical surveillance of personnel occupationally exposed to ionizing radiation . The principle of optimization of the RP, or ALARA principle (keeping the risk as low as reasonably achievable), is assumed to be the safety philosophy in the field of industrial applications of ionizing radiation. Practically all the elements that make up the equipment, instrumentation and materials used in industrial radiography and other industrial applications, has an orientation towards the protection, along with procedures that operate. For example, in industrial radiography the technician always has several instruments for radiation detection and measurement, some with visible and audible alarms. The equipment characteristics and transport (containers) are regulated by the standards NOM-025/1- 2000 and NOM-025/2-2996, which contains requirements for radiological safety in design and operation, respectively, for both as containers for some of its parts and accessories. As part of the technological innovation with benefits to the RP itself and eventually target practice today are venturing into the radiography digital, which involves the exposure of a plate image phosphorus-based with the later download to a computer. In combination with the use of sources of X-rays, there is a real contribution to reducing the dose, since the later are nowadays equipped with programmable

  7. Iron, Oil, and Emeryville: Resource Industrialization and Metropolitan Expansion in the San Francisco Bay Area, 1850-1900

    OpenAIRE

    Lunine, Seth

    2013-01-01

    Scholars have largely overlooked the formative role of industry in both California's economic development and the San Francisco Bay Area's metropolitan expansion during the late nineteenth century. Beginning in the early 1880s, leading firms in San Francisco's specialized industries, such as the iron and chemicals sectors, dispersed to the metropolitan periphery. This process of industrial suburbanization created an integrative metropolitan economy, as well as individual suburbs. In this di...

  8. Peat wetland as a natural filter of effluents from adjacent industrial areas

    Directory of Open Access Journals (Sweden)

    József DEZSO

    2015-12-01

    Full Text Available The main objective of the project is the study of a peat wetland functioning as recipient of effluents from former and present-day industrial activities. The investigation was focused on heavy metal contaminations and their probable mobilization or fixation. The studied peatbog is a typical Eastern European wetland, located in Hungary on the border between medium mountains (Bakony Mountains and a Neogene basin (the Sárrét, an area under nature conservation. Watercourses and prevailing air currents can transport contaminants from industrial areas to the wetland. At first the basic parameters of surface waters and subsurface conditions (soils, groundwater were investigated. These parameters (EC, Cl are possible indicators of contamination. Subsequently, the amounts of heavy metals (Cd, Pb extracted by solution in two steps (HCl, CaCl2 were measured using atomic absorption spectroscopy (AAS. The extracted values indicate what amounts of which elements could be mobilized by human impact and/or production of humic acids, which occasionally emerges during the remediation works. The total heavy metal concentrations in the samples were investigated by X-ray fluorescence method. Based on the investigation, the peatbog is claimed to function as a natural filter.

  9. Effect of soap industry effluents on soil and ground water in Albageir area

    International Nuclear Information System (INIS)

    Awadalla, S. O.

    2004-02-01

    This study investigates the effect on soil and ground water produced by the effluent from soap industry discharged from Alsheikh Mustafa Alamin (SMA) factory, in Albageir industrial area, located 45 Km south of Khartoum. Soil samples were taken from the periphery of the effluent pond and from 25 and 50 cm depths from pits at different distances from the pond.The samples were analyzed for the following chemical and physical characteristics PH, EC, sodium, chloride ions and their grain size, in order to investigate any possible soil degradation. The results showed that there is an increase in soil salinity and sodicity resulting from the improper discharge of the liquid waste, and from lack of treatment before the discharge. Hence, there are definitive signs for soil degradation in the study area, which could reach a high magnitude in the long.This situation could be rectified by adopting updated techniques for treatment and disposal of effluent, and by regular inspection, by the authorities in order to make sure that the regulations are not violated. Chemical and physical analyses of ground water samples showed no signs of pollution. However, if the disposal practices are not revised, the possibility of pollution in the near future is likely to occur. A package of measurements is proposed in order to curb the impact of the industry on the environment. (Author)

  10. Development and Application of Environmental Quality of Life Scale among People Residing near Three Types of Industrial Areas, Southern Thailand

    Science.gov (United States)

    Sopsuk, Jirawan; Chongsuvivatwong, Virasakdi; Sornsrivichai, Vorasith; Hasuwanakit, Supat

    2013-01-01

    To compare QOL among rural people living in three different industrial areas and one non-industrial area in southern Thailand. A questionnaire based on the WHOQOL-BREF with environmental assessment was initially developed. After consultation with experts and pilot study, it was tested to check internal reliability and further modified as…

  11. Polycyclic aromatic hydrocarbons associated with particles in ambient air from urban and industrial areas

    Energy Technology Data Exchange (ETDEWEB)

    Rehwagen, Martina; Mueller, Andrea; Herbarth, Olf [UFZ-Centre for Environmental Research Leipzig-Halle, Department of Human Exposure Research and Epidemiology, Permoserstr. 15, D 04318 Leipzig (Germany); Massolo, Laura; Ronco, Alicia [CIMA Centro de Investigaciones del Medio Ambiente, Facultad de Ciencias Exactas, Universidad Nacional de La Plata, 8 Calle 47 y 115, 1900 La Plata (Argentina)

    2005-09-15

    This study takes into consideration an analysis of the chemical polycyclic aromatic hydrocarbon (PAH) profile and its distribution in inhalable and respirable particulate matter in urban and industrial areas in La Plata, Argentina, and Leipzig, Germany. Representative samples from three locations in La Plata (industrial, traffic influenced and control area) and two locations in Leipzig (traffic influenced and control area) were obtained in summer and winter. The sampling of particulate matter was carried out with high volume collectors using cascade impactors to separate six size fractions. PAHs were extracted with hexane through a solid-liquid equilibrium extraction and analysed by HPLC/UV/fluorescence detection. The results showed a PAH seasonal behaviour in both regions, with lower contents in summer and higher ones in winter. Highest concentrations of total PAHs were found in the industrial area in La Plata. The size distribution of particles demonstrates the greater relevance of smaller particles. More than 50% of PAHs were associated with particles of less than 0.49 {mu}m. Moreover, this particle size fraction was associated with traffic, whereas other sources of combustion were related also to particles between 0.49 and 0.95 {mu}m. Considering the ratio of benzo(ghi)perylene (BgP)/benzo(a)pyrene (BaP) as an indicator for traffic influence, it was observed that La Plata City was more affected than Leipzig by the same proportion in summer and in winter. The BgP/InP (indeno(123-cd)pyrene) ratio was lower in winter than in summer in both places and indicates the presence of domestic combustion sources. It is important to point out the significance of using fingerprint compound ratios to identify possible sources of pollution with PAHs bound to particles.

  12. Ambient air quality at the wider area of an industrial mining facility at Stratoni, Chalkidiki, Greece.

    Science.gov (United States)

    Gaidajis, Georgios; Angelakoglou, Komninos; Gazea, Emmy

    2012-01-01

    To assess ambient air quality at the wider area of a mining-industrial facility in Chalkidiki, Greece, the particulate matter with an aerodynamic diameter of 10 μm (PM(10)) and its content in characteristic elements, i.e., As, Cd, Cu, Fe, Mn, Pb, Zn were monitored for a period of three years (2008-2010). Gravimetric air samplers were employed for the particulate matter sampling at three sampling stations located in the immediate vicinity of the industrial facility and at a neighbouring residential site. Monitoring data indicated that the 3-year median PM(10) concentrations were 23.3 μg/m(3) at the residential site close to the facility and 28.7 μg/m(3) at the site within the facility indicating a minimal influence from the industrial activities to the air quality of the neighbouring residential area. Both annual average and median PM(10) concentration levels were below the indicative European standards, whereas similar spatial and temporal variation was observed for the PM(10) constituents. The average Pb concentrations measured for the three sampling sites were 0.2, 0.146 and 0.174 μg/m(3) respectively, well below the indicative limit of 0.5 μg/m(3). The quantitative and qualitative comparison of PM(10) concentrations and its elemental constituent for the three sampling stations did not indicate any direct influence of the mining-industrial activities to the air quality of the Stratoni residential area.

  13. Fitting Irregular Shape Figures into Irregular Shape Areas for the Nesting Problem in the Leather Industry

    Directory of Open Access Journals (Sweden)

    Guevara-Palma Luis

    2015-01-01

    Full Text Available The nesting problem of irregular shapes within irregular areas has been studied from several approaches due to their application in different industries. The particular case of cutting leather involves several restrictions that add complexity to this problem, it is necessary to generate products that comply with the quality required by customers This paper presents a methodology for the accommodation of irregular shapes in an irregular area (leather considering the constraints set by the footwear industry, and the results of this methodology when applied by a computer system. The scope of the system is to develop a working prototype that operates under the guidelines of a commercial production line of a sponsor company. Preliminary results got a reduction of 70% of processing time and improvement of 5% to 7% of the area usage when compared with manual accommodation.

  14. Blood lead level studies by the Public Health Service in an industrial stress area

    Energy Technology Data Exchange (ETDEWEB)

    Jantzen, G.

    1981-12-01

    The general directions of the European Community concerning lead resulted to be useful for analysing the biologic impact on the population living in an industrial immission area and for differentiating within this locality affected and non-affected residential districts. Consequently the social-hygienic and regional-hygienic measures are limited and justified territorially. The environmental parameters, their relation to the distance at which an industrial plant is situated and the blood lead values are indicated. Recommendations are given, which concern the protection of health and even the reconstruction of the residential area by immission-reducing measures. It was found that the lead impact on children is higher than that on grown-ups. Tables illustrate the symptomatology of lead impacts, its relation to blood lead concentration, the degree of impact measured in children and grown-ups and the corresponding necessary measures as auxiliary methods for the Public Health Service and the physicians.

  15. Geochemical study of urban soils in public areas of an industrialized town (Ajka, western Hungary)

    Science.gov (United States)

    Zacháry, D.; Jordán, Gy.; Szabó, Cs.

    2012-04-01

    Soil is one of the most essential parts of urban ecosystem contributing to the biogeochemical cycles along the rock-soil-plant-animal and human pathway. Soil plays a fundamental role in plant nutrient uptake and groundwater filtration, too. Urban soils differ from non-urban soils in many aspects, including their origin, and they may also concentrate contaminants in large quantities due to intensive human activities. The pollution sources are industry, traffic, fertilizer, tailing and waste. In addition to the increasing rate of urban areas, urban soils are under growing interest and their pollution have received significant attention in the past few decades. This work focuses on the toxic element (As, Hg, Pb, Cu, Zn, Cd, Ni) content of soils and their spatial distribution in order to find a link between contamination sources and the receiving urban soils at sensitive receptor locations such as children's playgrounds and parks. Ajka town is located in western Hungary. It has an old-established industrial history with multiple contamination sources of heavy alumina industry and coal-based power plants supplied by the nearby bauxite and coal mines. At 44 locations 46 soil samples have been collected at a depth of 0-10 cm along a 1x1 km grid. The whole grid covers an area of 48 km2. In each grid cell a sampling site was selected at public areas. Sample preparation included drying at 40 C°, thorough homogenization and sieving to 2 mm fine earth before chemical analysis. Grain size distribution and soil pH were also determined. Samples were analyzed with ICP-OES and SEM methods. The As, Hg, Pb, Cu, Zn, Cd and Ni concentrations range from 2.07 ppm to 9.48 ppm, 0.02 ppm to 2.84 ppm, 5.08 ppm to 35.74 ppm, 2.55 ppm to 47.78 ppm, 17.00 ppm to 91.00 ppm, 0.07 ppm to 0.61 ppm and 5.57 ppm to 32.09 ppm, respectively. The results revealed the contaminated areas associated with past industrial sites. This study also identified locations with considerable contamination at

  16. Uncertainty in the Sphere of the Industry 4.0 – Potential Areas to Research

    Directory of Open Access Journals (Sweden)

    Andrzej Magruk

    2016-12-01

    Full Text Available The world stands on the threshold of a new age of technology, which will launch a fourth industrial revolution (Industry 4.0. According to this idea, web-based network will support smart factories at every stage of the work on the product, from design through to servicing and recycling. It is a vision of a world in which the real environment connects to the digital one using follows driving forces: Internet of things, cloud computing, big data, cyber-physical systems, and others. The Industry 4.0 concept is based on developing smart chains preparation based on communicating with each other means of production, products, components, plants, humans. Established in Germany, the concept of Industry 4.0, is the brainchild – its beginning reaches 2011. It is therefore fraught with high level of uncertainty in many aspects (economic, social, technological, legal, etc.. The main aim of this article is to analyze different dimensions of uncertainty regarding the Industry 4.0, both in terms of opportunities and threats. Due to the freshness of the topic and the great complexity of the Industry 4.0 phenomenon, the main aim of the article is to identify potential areas requiring the necessary research in order minimizing negative – today uncertain – effects occurring in both the design concept Industry 4.0 as well as during its functioning.

  17. Evaluating Insects as Bioindicators of Heavy Metal Contamination and Accumulation near Industrial Area of Gujrat, Pakistan.

    Science.gov (United States)

    Azam, Iqra; Afsheen, Sumera; Zia, Ahmed; Javed, Muqaddas; Saeed, Rashid; Sarwar, Muhammad Kaleem; Munir, Bushra

    2015-01-01

    To study the accumulation and contamination of heavy metals (i.e., Cd, Cr, Cu, Ni, and Zn) in soil, air, and water, few insect species were assayed as ecological indicators. Study area comes under industrial zone of district Gujrat of Punjab, Pakistan. Insects used as bioindicators included a libellulid dragonfly (Crocothemis servilia), an acridid grasshopper (Oxya hyla hyla), and a nymphalid butterfly (Danaus chrysippus) near industrial zone of Gujrat. Accumulation of Cd was highest in insect species followed by Cu, Cr, Zn, and Ni at p Lepidoptera. The total metal concentrations in insects were pointed significantly higher at sites S3 (Mid of HalsiNala), S9 (End of HalsiNala), and S1 (Start of HalsiNala), whereas lowest value was detected at site S6 (Kalra Khasa) located far from industrial area. HACA indicates that these insect groups are potential indicators of metal contamination and can be used in biomonitoring.

  18. Identification of soybean genotypes adaptive to tropical area and suitable for industry

    Science.gov (United States)

    Adie, M. M.; Krisnawati, A.

    2018-01-01

    Soybeans in Indonesia are mostly used for raw material of tempeh industry. This study aims to identify 150 soybean genotypes for their suitability for raw materials of tempeh and adaptability to be developed in tropical area of Indonesia. The research material consisted of 150 soybean genotypes. The field research was conducted in Malang from February to May 2016, using a randomized block design with two replicates. The identification of 150 soybean genotypes showed 30.67% of super early maturity (soybeans with large seed size. In this research, G511H/Anj//Anj////Anjs-8-5 was suitable to be developed in Indonesia’s tropical climate and also preferred by industry for tempeh raw material due to its high yield, super early days to maturity, and large seed size.

  19. AREAS OF ECONOMIC INFLUENCE OF SUGARCANE INDUSTRY IN MATO GROSSO, 2010.

    Directory of Open Access Journals (Sweden)

    Wladimir Colman de Azevedo Junior

    2015-09-01

    Full Text Available The Macroeconomic data reveals the increase of sugarcane chain relevance to Mato Grosso economy, however does not exist studies that evaluate the scope of regional impacts. This research has as the main objective the identification of the territory extension of the sugarcane industry influence in Mato Grosso during 2010, characterizing relationships between industrial plants and the regions where they acting. Was used the gravitational model developed by Isard (1956 to estimate this interrelation commerce patterns of the chain in the state, to find the sugarcane regional centers, as well as, to set up their potential areas of influence. As results has the identification of the 13 cane regions, three cities in first level, seven in the second level and three sub-centers. The relations between this centers and the respective regions has different specifications and their complete understanding allows destination of private investments and public politics. Keywords: Gravitational Model. Cane Sugar Suply Chain. Mato Grosso.

  20. The impact of industrial anthropization on mosquito (Diptera, Culicidae) communities in mangrove areas of Guanabara Bay (Rio de Janeiro, Brazil).

    Science.gov (United States)

    de Souza, A S; Couri, M S; Florindo, L

    2012-02-01

    The effects of industrial anthropization on species composition and community diversity of Culicidae (Diptera) were studied in a mangrove area impacted by industrial activities as compared to a preserved area, both around Guanabara Bay in the state of Rio de Janeiro, Brazil. Diversity, equitability, and species richness in Culicidae community differed between the studied areas. Indicator species analysis and correspondence analysis were carried out and indicated that the Sabethini, especially Wyeomyia (Phoniomyia) theobaldi Lane, Wyeomyia (Phoniomyia) fuscipes (Edwards), and a non-identified species of Wyeomyia sp. were associated to the preserved area, whereas Aedes taeniorhynchus Wiedemann and Aedes scapularis (Rondani) to the impacted area.

  1. The World Health Organization and the Pharmaceutical Industry. Common areas of interest and differing views.

    Science.gov (United States)

    Hardwicke, Caroline J

    2002-01-01

    No article published in the scientific press in the last 10 years reviews the various areas of interest common to the World Health Organization (WHO) and the pharmaceutical industry. Despite a vast amount of information in the public domain, the policies expound the views only of the bodies they represent rather than comparing differing views. An understanding of the factors which affect the interaction between these organisations as well as the organisational structures and the actual areas of intersecting interest, may help to find ways for the industry to assist the WHO in its endeavours in developing countries. Modern drug development is performed initially in and for western society, leaving the areas of infectious or tropical diseases with relatively less industry investment than cancer and cardiovascular disorders. Aspects of the development of an ethical drug, regardless of its therapeutic class (selection of drug name, intellectual property rights, drug safety, marketing and pricing, quality assurance and counterfeiting, generic use, emerging drug donations) are influenced to varying degrees by the triad of money, politics and medical need and the perspectives (each defensible) placed thereon by the WHO and industry. Instead of simply defending their positions combining the best of these strategies to optimise drug development for the needs of developing countries appears logical. Similarly, via its philanthropic initiatives, industry will have donated over $US1 billion in drug and research aid in the period 1995 to 2005. These charitable projects should yield useful information for planning and organising future aid efforts. Global warming, only recently given serious governmental consideration, is an area not yet addressed in drug development policy although along with geographical effects, it is likely to have an impact on the epidemiology of diseases e.g. malaria returning to the Mediterranean, worldwide. With changing disease patterns (and

  2. Assessment of Respiratory Function in Students, Residing in Different Industrial Areas

    Directory of Open Access Journals (Sweden)

    Aiman E. Konkabaeva

    2013-01-01

    Full Text Available The article considers the results of the examination of three groups of apparently healthy volunteer students of one social group, both men and women, without bad habits, aged 19-22. Students live in three different industrial areas of Central Khazakhstan, containing ironworks (Temirtau and non-ferrous smelters (Balkhash, Zhezkazgan. It determined the necessity of respiratory function examination, using automated lung tester. The examination of respiratory function determined the decrease of the following parameters: lung vital capacity, maximal expiratory flow volume, forced expiratory volume 1, peak expiratory flow rate, cardiac minute output 25-50 if compared to proper parameters. The examination enabled us to make the conclusion that respiratory function is restricted due to high respiratory load, caused by air pollution. Changes intensity is different and can indicate the pollution in the examined areas.

  3. Evaluating Insects as Bioindicators of Heavy Metal Contamination and Accumulation near Industrial Area of Gujrat, Pakistan

    Directory of Open Access Journals (Sweden)

    Iqra Azam

    2015-01-01

    Full Text Available To study the accumulation and contamination of heavy metals (i.e., Cd, Cr, Cu, Ni, and Zn in soil, air, and water, few insect species were assayed as ecological indicators. Study area comes under industrial zone of district Gujrat of Punjab, Pakistan. Insects used as bioindicators included a libellulid dragonfly (Crocothemis servilia, an acridid grasshopper (Oxya hyla hyla, and a nymphalid butterfly (Danaus chrysippus near industrial zone of Gujrat. Accumulation of Cd was highest in insect species followed by Cu, Cr, Zn, and Ni at p<0.05. Hierarchical cluster analysis (HACA was carried out to study metal accumulation level in all insects. Correlation and regression analysis confirmed HACA observations and declared concentration of heavy metals above permissible limits. Metal concentrations in insects were significantly higher near industries and nallahs in Gujrat and relatively higher concentrations of metals were found in Orthoptera than Odonata and Lepidoptera. The total metal concentrations in insects were pointed significantly higher at sites S3 (Mid of HalsiNala, S9 (End of HalsiNala, and S1 (Start of HalsiNala, whereas lowest value was detected at site S6 (Kalra Khasa located far from industrial area. HACA indicates that these insect groups are potential indicators of metal contamination and can be used in biomonitoring.

  4. Flared gases and other pollutants associated with air quality in industrial areas of Nigeria: an overview.

    Science.gov (United States)

    Osuji, Leo C; Avwiri, Greg O

    2005-10-01

    Nigeria, like any other developing nation, is faced with the twin problem of development without destruction. Industrialization, though an important component of development, has had a large share in the despoilation of air quality in the country by the release of high amounts of pollutants into the atmosphere. Petroleum hydrocarbons from refineries, flared gases, dusts, and fumes of metal-smelting and cement works, odorous gases of chemical and allied industries, carbon monoxide and oxides of sulfur and nitrogen of internal combustion engines, the charred particulates and sulfur dioxide emissions of the steel industries etc., all constitute pollutants or co-pollutants of the Nigerian atmosphere. This review article gives an insight into the phenomenal concentrations of some of these pollutants in the Nigerian atmosphere, which point to their unsafe levels and concomitant health risks. It is against this background that there should be continuous but sound monitoring exercise of the Nigerian environment, devoid of the peculiar mix of politics and science, in order to properly audit the quality of air, especially in areas of heavy industrial pollution. Such checks and balances would provide empirical data to assess the various trade-offs of atmospheric pollution in industrial areas of the country such as the Niger Delta region where oil and gas are produced. There should also be enforcement, thereof, of all existing and/or revised standards or regulations such as the compliance limits of the Department of Petroleum Resources (DPR) or the erstwhile Federal Environmental Protection Agency (FEPA).

  5. 23 CFR 750.706 - Sign control in zoned and unzoned commercial and industrial areas.

    Science.gov (United States)

    2010-04-01

    ... TRANSPORTATION RIGHT-OF-WAY AND ENVIRONMENT HIGHWAY BEAUTIFICATION Outdoor Advertising Control § 750.706 Sign... spacing of outdoor advertising signs located in commercial or industrial zoned or unzoned areas, as... back-to-back or “V” type signs. (c) Where the agreement and State law permits control by local zoning...

  6. Low temperature industrial waste heat utilization in the area 'Speyer-Ludwigshafen-Frankenthal-Worms'

    International Nuclear Information System (INIS)

    Nunold, K.; Krebs, A.

    1982-01-01

    The aim of the study is the elaboration of reliable facts whether and under which conditions low temperature industrial waste heat systems can be economically utilized for heating purposes. The source of the waste heat are power- and industrial plants. In order to obtain reliable results, investigations have been carried out in the area Speyer-Ludwigshafen-Frankenthal and Worms. These investigations showed a number of application possibilities for heat pumps and it became moreover evident that there is a high variaiton of the heat requirement due to social components and the different type of building structures of the consumers. The economic results showed that the application of this heating system can under certain conditions supplement resp. replace other heating systems. (orig.) [de

  7. Peat wetland as a natural filter of effluents from adjacent industrial areas

    OpenAIRE

    József DEZSO; Gabriella TÓTH; Dénes LÓCZY

    2015-01-01

    The main objective of the project is the study of a peat wetland functioning as recipient of effluents from former and present-day industrial activities. The investigation was focused on heavy metal contaminations and their probable mobilization or fixation. The studied peatbog is a typical Eastern European wetland, located in Hungary on the border between medium mountains (Bakony Mountains) and a Neogene basin (the Sárrét, an area under nature conservation). Watercourses and prevailing air c...

  8. Health effects of environmental pollution in population living near industrial complex areas in Korea.

    Science.gov (United States)

    Eom, Sang-Yong; Choi, Jonghyuk; Bae, Sanghyuk; Lim, Ji-Ae; Kim, Guen-Bae; Yu, Seung-Do; Kim, Yangho; Lim, Hyun-Sul; Son, Bu-Soon; Paek, Domyung; Kim, Yong-Dae; Kim, Heon; Ha, Mina; Kwon, Ho-Jang

    2018-01-01

    Several epidemiological studies have reported an association between environmental pollution and various health conditions in individuals residing in industrial complexes. To evaluate the effects of pollution from industrial complex on human health, we performed a pooled analysis of environmental epidemiologic monitoring data for residents living near national industrial complexes in Korea. The respiratory and allergic symptoms and the prevalence of acute and chronic diseases, including cancer, were used as the outcome variables for health effects. Multiple logistic regression analysis was used to analyze the relationship between exposure to pollution from industrial complexes and health conditions. After adjusting for age, sex, smoking status, occupational exposure, level of education, and body mass index, the residents near the industrial complexes were found to have more respiratory symptoms, such as cough (odds ratio [OR], 1.18; 95% confidence interval [CI], 1.06 to 1.31) and sputum production (OR, 1.13; 95% CI, 1.03 to 1.24), and symptoms of atopic dermatitis (OR, 1.10; 95% CI, 1.01 to 1.20). Among residents of the industrial complexes, the prevalence of acute eye disorders was approximately 40% higher (OR, 1.39; 95% CI, 1.04 to 1.84) and the prevalence of lung and uterine cancer was 3.45 times and 1.88 times higher, respectively, than those among residents of the control area. This study showed that residents living in the vicinity of industrial complexes have a high risk of acute and chronic diseases including respiratory and allergic conditions. These results can be used as basic objective data for developing health management measures for individuals residing near industrial complexes.

  9. Health effects of environmental pollution in population living near industrial complex areas in Korea

    Directory of Open Access Journals (Sweden)

    Sang-Yong Eom

    2018-01-01

    Full Text Available Several epidemiological studies have reported an association between environmental pollution and various health conditions in individuals residing in industrial complexes. To evaluate the effects of pollution from industrial complex on human health, we performed a pooled analysis of environmental epidemiologic monitoring data for residents living near national industrial complexes in Korea. The respiratory and allergic symptoms and the prevalence of acute and chronic diseases, including cancer, were used as the outcome variables for health effects. Multiple logistic regression analysis was used to analyze the relationship between exposure to pollution from industrial complexes and health conditions. After adjusting for age, sex, smoking status, occupational exposure, level of education, and body mass index, the residents near the industrial complexes were found to have more respiratory symptoms, such as cough (odds ratio [OR], 1.18; 95% confidence interval [CI], 1.06 to 1.31 and sputum production (OR, 1.13; 95% CI, 1.03 to 1.24, and symptoms of atopic dermatitis (OR, 1.10; 95% CI, 1.01 to 1.20. Among residents of the industrial complexes, the prevalence of acute eye disorders was approximately 40% higher (OR, 1.39; 95% CI, 1.04 to 1.84 and the prevalence of lung and uterine cancer was 3.45 times and 1.88 times higher, respectively, than those among residents of the control area. This study showed that residents living in the vicinity of industrial complexes have a high risk of acute and chronic diseases including respiratory and allergic conditions. These results can be used as basic objective data for developing health management measures for individuals residing near industrial complexes.

  10. Trace elements of concern affecting urban agriculture in industrialized areas: A multivariate approach.

    Science.gov (United States)

    Boente, C; Matanzas, N; García-González, N; Rodríguez-Valdés, E; Gallego, J R

    2017-09-01

    The urban and peri-urban soils used for agriculture could be contaminated by atmospheric deposition or industrial releases, thus raising concerns about the potential risk to public health. Here we propose a method to evaluate potential soil pollution based on multivariate statistics, geostatistics (kriging), a novel soil pollution index, and bioavailability assessments. This approach was tested in two districts of a highly populated and industrialized city (Gijón, Spain). The soils showed anomalous content of several trace elements, such as As and Pb (up to 80 and 585 mg kg -1 respectively). In addition, factor analyses associated these elements with anthropogenic activity, whereas other elements were attributed to natural sources. Subsequent clustering also facilitated the differentiation between the northern area studied (only limited Pb pollution found) and the southern area (pattern of coal combustion, including simultaneous anomalies of trace elements and benzo(a)pyrene). A normalized soil pollution index (SPI) was calculated by kriging, using only the elements falling above threshold levels; therefore point-source polluted zones in the northern area and diffuse contamination in the south were identified. In addition, in the six mapping units with the highest SPIs of the fifty studied, we observed low bioavailability for most of the elements that surpassed the threshold levels. However, some anomalies of Pb contents and the pollution fingerprint in the central area of the southern grid call for further site-specific studies. On the whole, the combination of a multivariate (geo) statistic approach and a bioavailability assessment allowed us to efficiently identify sources of contamination and potential risks. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Diurnal, weekly and seasonal air concentrations of PCDD and PCDF in an industrial area

    International Nuclear Information System (INIS)

    Benfenati, E.; Mariani, G.; Schiavon, G.; Lodi, M.; Fanelli, R.

    1994-01-01

    Air samples were collected in an industrial area close to Milan in July and in November, day and night for five days and have been analyzed for PCDD and PCDF. Average summer levels were generally lower than winter levels, and average concentrations were higher by night than by day in both months. (orig.)

  12. Evaluating Insects as Bioindicators of Heavy Metal Contamination and Accumulation near Industrial Area of Gujrat, Pakistan

    OpenAIRE

    Azam, Iqra; Afsheen, Sumera; Zia, Ahmed; Javed, Muqaddas; Saeed, Rashid; Sarwar, Muhammad Kaleem; Munir, Bushra

    2015-01-01

    To study the accumulation and contamination of heavy metals (i.e., Cd, Cr, Cu, Ni, and Zn) in soil, air, and water, few insect species were assayed as ecological indicators. Study area comes under industrial zone of district Gujrat of Punjab, Pakistan. Insects used as bioindicators included a libellulid dragonfly (Crocothemis servilia), an acridid grasshopper (Oxya hyla hyla), and a nymphalid butterfly (Danaus chrysippus) near industrial zone of Gujrat. Accumulation of Cd was highest in insec...

  13. Landscape monitoring of post-industrial areas using LiDAR and GIS technology

    Directory of Open Access Journals (Sweden)

    Wężyk Piotr

    2015-06-01

    Full Text Available The quarrying industry is changing the local landscape, forming deep open pits and spoil heaps in close proximity to them, especially lignite mines. The impact can include toxic soil material (low pH, heavy metals, oxidations etc. which is the basis for further reclamation and afforestation. Forests that stand on spoil heaps have very different growth conditions because of the relief (slope, aspect, wind and rainfall shadows, supply of solar energy, etc. and type of soil that is deposited. Airborne laser scanning (ALS technology deliver point clouds (XYZ and derivatives as raster height models (DTM, DSM, nDSM=CHM which allow the reception of selected 2D and 3D forest parameters (e.g. height, base of the crown, cover, density, volume, biomass, etc. The automation of ALS point cloud processing and integrating the results into GIS helps forest managers to take appropriate decisions on silvicultural treatments in areas with failed plantations (toxic soil, droughts on south-facing slopes; landslides, etc. or as regular maintenance. The ISOK country-wide project ongoing in Poland will soon deliver ALS point cloud data which can be successfully used for the monitoring and management of many thousands of hectares of destroyed post-industrial areas which according to the law, have to be afforested and transferred back to the State Forest.

  14. Guidelines for integrated risk assessment and management in large industrial areas. Inter-Agency programme on the assessment and management of health and environmental risks from energy and other complex industrial systems

    International Nuclear Information System (INIS)

    1998-01-01

    The IAEA, the United Nations Environment Programme (UNEP) within the framework of the Awareness and Preparedness for Emergencies at Local Level (APELL), the United Nations Industrial Development Organization (UNIDO) and the World Health Organization (WHO) decided in 1986 to join forces in order to promote the use of integrated area wide approaches to risk management. An Inter-Agency Programme, which brings together expertise in health the environment, industry and energy, all vital for effective risk management, was established. The Inter-Agency Programme on the assessment and Management of Health and Environmental Risks from Energy and Other Complex Industrial Systems aims at promoting and facilitating the implementation of integrated risk assessment and management for large industrial areas. This initiative includes the compilation of procedures and methods for environmental and public health risk assessment, the transfer of knowledge and experience amongst countries in the application of these procedures and the implementation of an integrated approach to risk management. The purpose of the Inter-Agency Programme is to develop a broad approach to the identification, prioritization and minimization of industrial hazards in a given geographical area. The UN organizations sponsoring this programme have been involved for several years in activities aimed at assessment and management of environmental and health risks, prevention of major accidents and emergency preparedness. These Guidelines have been developed on the basis of experience from these activities to assist in the planning and conduct of regional risk management projects. They provide a reference framework for the undertaking of integrated health and environmental risk assessment for large industrial areas and for the formulation of appropriate risk management strategies

  15. Guidelines for integrated risk assessment and management in large industrial areas. Inter-Agency programme on the assessment and management of health and environmental risks from energy and other complex industrial systems

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-01-01

    The IAEA, the United Nations Environment Programme (UNEP) within the framework of the Awareness and Preparedness for Emergencies at Local Level (APELL), the United Nations Industrial Development Organization (UNIDO) and the World Health Organization (WHO) decided in 1986 to join forces in order to promote the use of integrated area wide approaches to risk management. An Inter-Agency Programme, which brings together expertise in health the environment, industry and energy, all vital for effective risk management, was established. The Inter-Agency Programme on the assessment and Management of Health and Environmental Risks from Energy and Other Complex Industrial Systems aims at promoting and facilitating the implementation of integrated risk assessment and management for large industrial areas. This initiative includes the compilation of procedures and methods for environmental and public health risk assessment, the transfer of knowledge and experience amongst countries in the application of these procedures and the implementation of an integrated approach to risk management. The purpose of the Inter-Agency Programme is to develop a broad approach to the identification, prioritization and minimization of industrial hazards in a given geographical area. The UN organizations sponsoring this programme have been involved for several years in activities aimed at assessment and management of environmental and health risks, prevention of major accidents and emergency preparedness. These Guidelines have been developed on the basis of experience from these activities to assist in the planning and conduct of regional risk management projects. They provide a reference framework for the undertaking of integrated health and environmental risk assessment for large industrial areas and for the formulation of appropriate risk management strategies. Refs, figs, tabs.

  16. Atmospheric depositions around a heavily industrialized area in a seasonally dry tropical environment of India

    International Nuclear Information System (INIS)

    Singh, Raj Kumar; Agrawal, Madhoolika

    2005-01-01

    Clear and throughfall bulk depositions were collected in the downwind of a highly industrialized region in Sonbhadra district of India to estimate the influence of anthropogenic activities on chemical composition of depositions. Significant spatial and temporal variations in depositions of cations and anions were observed. Depositions were higher near the thermal power stations and coalmines as compared to distantly situated site. Seasonally summer samples showed maximum cation and anion depositions followed by winter and minimum in rainy season. The mean pH of the depositions indicates that rainfall in the area is alkaline. Among the anions, maximum deposition was recorded for SO 4 2- followed by NO 3 - and minimum for Cl - . Among the cations, Ca 2+ deposition was maximum followed by NH 4 + . Na + , K + and Mg 2+ deposition rates showed more or less similar values. The depositions of cations and anions as well as pH were higher in throughfall than clearfall samples. Results of the present study suggest that atmospheric depositions are strongly modified due to thermal power stations and coal mines in the area. - Atmospheric abundance of cations have neutralized the acidity of depositions around a heavily industrialized area in India

  17. Analysis of PAEs contaminants in water sources for agriculture, industrial and residential areas from local city district

    Science.gov (United States)

    Chen, Qidan; Chen, Qixian; Wu, Fei; Liao, Jia; Zhao, Xi

    2018-02-01

    The technology of DEHP and DBP detection by high performance liquid chromatography coupled with ultraviolet detection (HPLC-UV) was developed and applied in analysis of local water sources from agriculture, industrial and residential areas. Under the optimized sample pretreatment and detection conditions, DEHP and DBP were well separated and detected in 4 mins. The detection limit of DBP was 0.002 mg/L and DEHP was 0.006 mg/L, and it meets the Chinese National Standard limitations for drinking water quality. The linear correlation coefficient of DBP and DEHP standard calibration curves was 0.9998 and 0.9995. The linear range of DBP was 0.020 mg/L ∼20.0 mg/L, with the standard deviation of 0.560% ∼5.07%, and the linear range of DEHP was 0.060 mg/L ∼15.0 mg/L, with the standard deviation of 0.546% ∼5.74%. Ten water samples from Jinwan district of Zhuhai in Guangdong province of China were analyzed. However, the PAEs amounts found in the water sources from industrial areas were higher than the agriculture and residential areas, industries grow incredibly fast in the district in recently years and more attention should be paid to the increasing risks of water sources pollution.

  18. Bioaccumulation of selected heavy metals and histopathological and hematobiochemical alterations in backyard chickens reared in an industrial area, India.

    Science.gov (United States)

    Kar, Indrajit; Mukhopadhayay, Sunit Kumar; Patra, Amlan Kumar; Pradhan, Saktipada

    2018-02-01

    This study was carried out to determine the concentrations of four heavy metals, cadmium (Cd), lead (Pb), copper (Cu), and cobalt (Co), and histopathological lesions in tissues of chickens reared in an industrial area of West Bengal, India. In particular, Mejhia Block was selected as a heavy metal-exposed area and Vatar Block (120 km away from industrially polluted areas) as a reference site. Samples were collected from the backyard chickens in these areas. Concentrations of heavy metals in soil, water, feedstuffs, tissues (liver, kidney, spleen, lung, and muscle), and droppings were greater (p  kidney > lung > spleen > muscle. Heavy metal concentrations were greater in older chickens (> 1 year) than in young chickens (heavy metal exposure. Histological changes revealed necrotic lesions and tubulitis in the kidney, degeneration and necrosis in liver parenchyma, and periarteriolitis, peribronchiolitis, and presence of hemosiderin pigment in the lung of chickens in the exposed site. Results indicated that backyard chickens in heavy metal-exposed site may show pathological lesions in different tissues due to accumulation of heavy metals, and thus, the consumption of chicken meat from the industrially exposed site may pose a potential health risk to local residents of polluted sites.

  19. A study of polluted eco-system around industrial areas

    International Nuclear Information System (INIS)

    Husaini, S.N.; Khan, E.U.; Qureshi, I.E.; Malik, F.; Zaidi, J.H.; Arif, M.; Fatima, I.; Arif, M.

    2005-01-01

    Industrial pollution is one of the most serious problems in Pakistan. The uncontrolled release of untreated industrial effluents to large water bodies has deleterious effects on water quality, aquatic life and human health. The concentration of heavy metals in eco-system is reaching at alarming levels and is increasing yearly. In reality, the industries are not equipped with proper effluent treatment plants. The environmental protection law is not strictly implemented to limit the release and/or proper disposal of industrial effluents. Therefore, volume of specified industrial discharge is growing at an exponential rate without any specific safeguards. Effective measures, which can eliminate or considerably reduce hazardous factors from the human environment to minimize the associated health risks, must be identified and eradicated. In order to achieve these objectives, the study has been done to reach a balanced assessment of the risks and benefits involved. For this purpose two industrial cities of Pakistan namely, Gujranwala and Faisalabad have been selected. Four major industries existing in these cities, namely Yam, textile, paper and board and ceramics, have been studied. The specimens of the irrigated soil exposed to the industrial effluent, crops and vegetables grown on that soil have been analyzed study the hazardous effects on human health. (author)

  20. Risk Mapping Case Study: Industrial Area Of Trinec Town (Czech Republic) potentially endangered by floods and landslides

    Science.gov (United States)

    Dobes, P.; Hrdina, P.; Kotatko, A.; Danihelka, P.; Bednarik, M.; Krejci, O.; Kasperakova, D.

    2009-04-01

    One of present questions in the context of natural and technological risk mapping, which become important in last years, is analysis and assessment of selected types of multirisks. It results from relevant R&D projetcs and also from international workshops and conferences. From various surveys and presented activities it is evident existence a lot of data and methodological approaches for single risk categories but a lack of tested methodological approaches for multirisks. Within framework of workgroup was done literature search of multirisk assessment methodologies and innovations. The idea of this relatively small, local scale case study arose during the 3rd Risk Mapping Workshop, coordinated by EC DG JRC, IPSC in November 2007. The proposal was based on the previous risk analysis and assessment project, which has been done for Frydek-Mistek County area (Czech Republic) in the year 2002. Several industrial facilities in the Trinec are partly situated in the inundation area of river Olše and are partly protected by concrete barriers built on the banks of Olše. It has to be mentioned that these banks are unstable and in the permanent slow movement. If iron-concrete barriers will be overflowed by water as the result of sudden bank landslide or flood wave, it could trigger several industrial accidents on steel and energy production facilities. Area is highly developed from demographic and socioeconomic point of view. Selected area is in high stage of geological, engineering geological and hydrogeological investigation. Most important scenarios of acidents in the area were developed by What-If analysis and Black box analysis (just growth of several different scenarios; qualitative analysis). In the period of few years later, more QRA analyses of industrial risks were proceeded separately, thanks to District Office, public and Seveso II Directive requirements. General scenarios of multi-hazard events was considered. In the case study, three methodologies was applied

  1. [Heavy Metals Pollution in Topsoil from Dagang Industry Area and Its Ecological Risk Assessment].

    Science.gov (United States)

    Zhang, Qian; Chen, Zong-juan; Peng, Chang-sheng; Li, Fa-sheng; Gu, Qing-bao

    2015-11-01

    Based on previous studies and field investigation of Dagang industry area in Tianjin, a total of 128 topsoil samples were collected, and contents of 10 heavy metals (As, Cd, Cr, Co, Cu, Pb, Ni, V, Zn and Hg) were determined. The geoaccumulation index and geostatistics were applied to examine the degree of contamination and spatial distribution of heavy metals in topsoil. The assessment on ecological risk of heavy metals was carried out using Hakanson's method, and the main resources of the heavy metals were analyzed as well. It was found that As, Cd and Co had the highest proportions exceeding Tianjin background value, which were 100%, 97.66% and 96.88%, respectively; the heavy-metal content increased to some extent comparing with that in 2004, and the pollutions of As and Cd were the worst, and other metals were at moderate pollution level or below. The ecological risks of heavy metals were different in topsoil with different land use types, the farmland soil in the southwest as well as soils adjacent to the industrial land were at relatively high potential ecological risk level, and the integrated ecological risk index reached up to 1 437.37. Analysis of correlation and principal component showed that traffic and transportation as well as agricultural activities might be the main resources of heavy metals in the area, besides, the industrial activities in the region might also affect the accumulation of heavy metals.

  2. Radiological protection principles concerning the release for industrial use of areas contaminated from uranium mining

    International Nuclear Information System (INIS)

    Anon.

    1993-01-01

    With regard to uses of contaminated grounds as industrial sites, generally all exposure pathways relevant during stays outdoors have to be evaluated. Assuming conditions as realistic as possible, but sufficiently conservative, the dose estimates reveal that radiation exposure from inhalation of both contaminated dust particles and Rn-decay products is lower by almost one order of magnitude than external radiation exposure. The gamma dose rate above the contaminated areas and the potential input of radioactivity into the ground water therefore are relevant exposure pathways during the use of contaminated grounds as mere industrial sites. (orig./DG) [de

  3. Current target industry analysis: Las Vegas Metropolitan Area

    International Nuclear Information System (INIS)

    Boyle, M.R.

    1988-06-01

    This is the second of three reports dealing with the Las Vegas MSA's economic development potential in support of an overall effort to prepare an environmental impact statement for the proposed underground nuclear waste storage facility at Yucca Mountain. The first report provides an assessment of the MSA current business climate for economic growth. This second report draws on that business climate assessment to evaluate the Las Vegas MSA's competitive posture in pursuing business investment in the ''primary'' sector of the economy -- businesses which sell their products or services outside the local marketplace and bring new money back into the area and businesses serving local customers who would otherwise import these products or services from suppliers outside the area. GSO has developed an analytic tool which attempts to model the decision process used by businesses in selecting locations for new or expanded business investment. This computer based model reflects variations in site selection decision making among industries and ownership and management types. The underlying premise of the GSO locational compatibility index (LCI) model is that locational decisions are based more on a process of elimination that on a process of selection. There are many factors, some essential and some desirable, which influence any site selection decision. Multivariate comparative analyses narrow the geographic field to a region, then a group of states, then a state, then a sub-state region, then a community and finally to a specific site. Sometimes these analyses are rational and quantitative. More often, they are at least partially random and intuitive. 2 tabs

  4. Guidelines for planning interventions against external exposure in industrial area after a nuclear accident. Pt. 2. Calculation of doses using Monte Carlo method

    International Nuclear Information System (INIS)

    Kis, Z.; Eged, K.; Meckbach, R.; Mueller, H.

    2003-01-01

    Countermeasures being different from the usual urban ones and largely applicable in industrial area are collected and evaluated in a separate report. The industrial area is defined here as such an area where productive and/or commercial activity is carried out. A good example is a supermarket or a factory. Based on the history of calculation models it is unambiguous that the Monte Carlo based simulation is the perspective to the dose assessment from external exposures in such a complex environment. A method of the calculation of doses from external exposures in urban-industrial environment is presented. Moreover, this report gives a summary about the time dependence of the source strengths relative to a reference surface and a short overview about the mechanical and chemical intervention techniques which can be applied in this area. Using a hypothetical scenario (a supermarket area contaminated by 137 Cs) the details of an exemplary calculation are given directly addressing the dose and averted dose blocks of the templates of industrial countermeasures. In addition, a sensitivity analysis of the results is presented. (orig.)

  5. MLP based models to predict PM10, O3 concentrations, in Sines industrial area

    Science.gov (United States)

    Durao, R.; Pereira, M. J.

    2012-04-01

    Sines is an important Portuguese industrial area located southwest cost of Portugal with important nearby protected natural areas. The main economical activities are related with this industrial area, the deep-water port, petrochemical and thermo-electric industry. Nevertheless, tourism is also an important economic activity especially in summer time with potential to grow. The aim of this study is to develop prediction models of pollutant concentration categories (e.g. low concentration and high concentration) in order to provide early warnings to the competent authorities who are responsible for the air quality management. The knowledge in advanced of pollutant high concentrations occurrence will allow the implementation of mitigation actions and the release of precautionary alerts to population. The regional air quality monitoring network consists in three monitoring stations where a set of pollutants' concentrations are registered on a continuous basis. From this set stands out the tropospheric ozone (O3) and particulate matter (PM10) due to the high concentrations occurring in the region and their adverse effects on human health. Moreover, the major industrial plants of the region monitor SO2, NO2 and particles emitted flows at the principal chimneys (point sources), also on a continuous basis,. Therefore Artificial neuronal networks (ANN) were the applied methodology to predict next day pollutant concentrations; due to the ANNs structure they have the ability to capture the non-linear relationships between predictor variables. Hence the first step of this study was to apply multivariate exploratory techniques to select the best predictor variables. The classification trees methodology (CART) was revealed to be the most appropriate in this case.. Results shown that pollutants atmospheric concentrations are mainly dependent on industrial emissions and a complex combination of meteorological factors and the time of the year. In the second step, the Multi

  6. Evaluation of water resources around Barapukuria coal mine industrial area, Dinajpur, Bangladesh

    Science.gov (United States)

    Howladar, M. Farhad; Deb, Pulok Kanti; Muzemder, A. T. M. Shahidul Huqe; Ahmed, Mushfique

    2014-09-01

    Water is a very important natural resource which can be utilized in renewable or non-renewable forms but before utilizing, the evaluation of the quality of this resource is crucial for a particular use. However, the problems of water quality are more severe in areas where the mining and mineral processes' industries are present. In mining processes, several classes of wastes are produced which may turn into ultimately the sources of water quality and environmental degradation. In consequences, the evaluations of water quality for livestock, drinking, irrigation purposes and environmental implications have been carried out around the Barapukuria Coal Mining Industry under different methods and techniques such as primarily the field investigation; secondly the laboratory chemical analysis and thirdly justified the suitability of the laboratory analysis with statistical representation and correlation matrix, Schoeller plot, Piper's Trilinear diagram, Expanded Durov diagram, Wilcox diagram, US salinity diagram, Doneen's chart and others. The results of all surface and ground water samples analysis show that the characteristics and concentrations of all the major physical and chemical parameters such as pH, EC, TDS, Na+, K+, Ca2+, Mg2+, Fetotal, Cl-, HCO3 -, CO3 2- and SO4 2- are varied from one sample to other but well analogous with the WHO and EQS standard limit for all purposes in the area where the abundance of the major ions is as follows: Ca2+ > Na+ > Mg2+ > K+ > Fetotal = HCO3 - > SO4 2- > Cl- > CO3 2-. The graphical exposition of analytical data demonstrates two major hydrochemical facies for example: calcium-bicarbonate (Ca2+- HCO3 -) and magnesium-bicarbonate (Mg2+- HCO3 -) type facies which directly support the shallow recently recharged alkaline water around the industry. The calculated values for the evaluation classification of water based on TDS, Na%, EC, SAR, PI, RSC, MH, and TH replicate good to excellent use of water for livestock, drinking and

  7. Temporal characteristics of black carbon concentrations and its potential emission sources in a southern Taiwan industrial urban area.

    Science.gov (United States)

    Cheng, Yu-Hsiang; Lin, Chi-Chi; Liu, Jyh-Jian; Hsieh, Cheng-Ju

    2014-03-01

    This study investigates the temporal characteristics of black carbon and its potential emission sources, as well as the fractions of BC in PM2.5 levels in Kaohsiung urban area, which is an industrial city in southern Taiwan. Concentrations of BC and PM2.5 are monitored continuously from March 2006 to February 2010, using an aethalometer and a tapered element oscillating microbalance monitor. Additionally, the presence of organic compounds (or UV enhanced species) in particles at the sampling site is determined using the Delta-C (UVBC-BC) value. According to long-term measurement results, BC and PM2.5 concentrations are 3.33 and 34.0 μg m(-3), respectively, in the Kaohsiung urban area. The ratio of BC/PM2.5 is approximately 11 %. Low concentration of BC and PM2.5 in the summer of this study period is mostly likely owing to meteorological conditions that favored dispersion of local air pollutants. Nevertheless, BC concentrations peaked markedly during morning hours (7:00-11:00), likely owing to local traffic congestion. Measurement results suggest that BC is released from local traffic activities and emitted from industrial activities at this sampling site. Additionally, Delta-C values are significantly higher than zero during January-March and November-December periods in this industrial urban area, implying that UV enhanced species can be observed. At this sampling site, these UV enhanced species do not only originate from household activity and solid waste burning but also release from industrial activities. The elevated Delta-C values during nighttime (18:00-6:00) in the autumn and winter seasons are likely related to those UV enhanced species in the atmosphere, which can be condensed on particle surface under low temperature conditions. According to long-term measurement results, significantly positive Delta-C values can be observed under temperatures industrial parks and a coal-fired power plant.

  8. Regional risk assessment approaches to land planning for industrial polluted areas in China: the Hulunbeier region case study.

    Science.gov (United States)

    Li, Daiqing; Zhang, Chen; Pizzol, Lisa; Critto, Andrea; Zhang, Haibo; Lv, Shihai; Marcomini, Antonio

    2014-04-01

    The rapid industrial development and urbanization processes that occurred in China over the past 30years has increased dramatically the consumption of natural resources and raw materials, thus exacerbating the human pressure on environmental ecosystems. In result, large scale environmental pollution of soil, natural waters and urban air were recorded. The development of effective industrial planning to support regional sustainable economy development has become an issue of serious concern for local authorities which need to select safe sites for new industrial settlements (i.e. industrial plants) according to assessment approaches considering cumulative impacts, synergistic pollution effects and risks of accidental releases. In order to support decision makers in the development of efficient and effective regional land-use plans encompassing the identification of suitable areas for new industrial settlements and areas in need of intervention measures, this study provides a spatial regional risk assessment methodology which integrates relative risk assessment (RRA) and socio-economic assessment (SEA) and makes use of spatial analysis (GIS) methodologies and multicriteria decision analysis (MCDA) techniques. The proposed methodology was applied to the Chinese region of Hulunbeier which is located in eastern Inner Mongolia Autonomous Region, adjacent to the Republic of Mongolia. The application results demonstrated the effectiveness of the proposed methodology in the identification of the most hazardous and risky industrial settlements, the most vulnerable regional receptors and the regional districts which resulted to be the most relevant for intervention measures since they are characterized by high regional risk and excellent socio-economic development conditions. Copyright © 2013 Elsevier Ltd. All rights reserved.

  9. Appraisal of venomous metals in selected crops and vegetables from industrial areas of the Punjab Province

    International Nuclear Information System (INIS)

    Husaini, S.N.; Matiullah; Arif, M.

    2011-01-01

    Due to the inadequate water sources, usually sewerage water and industrial effluents are being use for irrigation of the agricultural land around the industrial areas in Pakistan wherein crops and vegetables are cultivated. As untreated effluents contain heavy elements, toxic metals and organic pollutants that may find its way through food chain to general public and may cause health hazards. It is, therefore, mandatory to assess the toxic metals in such crops and vegetables. In this regard, samples of corn, millet, cabbage, spinach and potato were collected within the vicinity of industrial areas of the Faisalabad and Gujranwala regions. The food samples were analyzed using neutron activation analysis (NAA) technique. The highest concentration values of Arsenic (1.9 ± 0.1 μg/g) and Cobalt (0.85 ± 0.01 μg/g) were found in cabbage whereas Manganese (91.6 ± 0.2 μg/g), Antimony (0.15 ± 0.03 μg/g) and Selenium (1.1 ± 0.1 μg/g) were observed in spinach and Chromium (9.63 ± 1.3 μg/g) was found in millet crop. The observed concentrations of all the toxic and heavy metals in crops and vegetables are higher than those reported in the literature. (author)

  10. A study on PCB, PCDD/PCDF industrial contamination in an urban/agricultural area. Part I - Soil

    Energy Technology Data Exchange (ETDEWEB)

    Turrio-Baldassarri, L.; Alivernini, S.; Battistelli, C.L. [Istituto Superiore di Sanita, Rome (IT)] (and others)

    2004-09-15

    The Istituto Superiore di Sanita is involved in a study on the impact of existing and past industrial activities as possible sources of contamination on the surrounding environment. The study will focus on an industrial plant inside Brescia, a city in the north-west of Italy, where, from 1938 to 1984, 150 tons of polychlorinated biphenyls (PCBs) were produced. In 1994, 1996 and 1998 three monitoring programs, preliminary to the construction of a municipal waste incinerator near the industrial plant, were carried out. High PCBs levels in soils were observed, namely 3000-6000 fold higher than the limits (0,001mg/Kg) allowed by the 1999 Italian law, in an agricultural area where several small farms are located; the farmers have been consuming for a long time food, such as milk and meat, produced in their own farms. This study has different aims: confirming and enriching previous data; helping determining the contamination source; measuring the contamination of the animals living in the area or fed with contaminated forage; evaluate the exposure of the farmers as compared to general population. Moreover, this study is interested in studying the PCB and PCDD/PCDF transfer from soils to humans across the food chain.

  11. 3D electrical image in area contaminated by hydrocarbons at the Cubatao, Brazil, industrial pole; Imageamento eletrico 3D em area contaminada por hidrocarbonetono no polo industrial de Cubatao - SP, Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Baessa, Marcus Paulus Martins [Centro de Pesquisas e Desenvolvimento Leopoldo Americo Miguez de Mello, CENPES, Rio de Janeiro, RJ (Brazil)], E-mail: marcus.baessa@petrobras.br; Oliva, Andresa; Kiang, Chang Hung [Universidade Estadual Paulista, UNESP, Rio Claro, SP (Brazil)], E-mails: aoliva@rc.unesp.br, chang@rc.unesp.br

    2010-12-15

    This work presents the results of geophysical surveys performed over an oil contaminated site in the Polo Industrial de Cubatao - Sao Paulo. The aim is to characterize geoelectrical signatures associated to hydrocarbon presence in order to delimit and calculate the volume of the contaminated area. For this study were used Vertical Electrical Sounding (VES) and 3D Electrical Imaging for characterization of geology and geoelectrical response of the contaminant. The results showed that the hydrocarbon presence is associated to conductive anomalies due to products from biodegradation. The conductive anomalies are disseminated over the area, totalizing 1365.3 m3 volume. This volume, however, corresponds only to the residual phase contaminants, since it was not possible to map free-phase hydrocarbons. (author)

  12. Antioxidant response of three Tillandsia species transplanted to urban, agricultural, and industrial areas.

    Science.gov (United States)

    Bermudez, Gonzalo M A; Pignata, María Luisa

    2011-10-01

    To evaluate the physiological response of Tillandsia capillaris Ruiz & Pav. f. capillaris, T. recurvata L., and T. tricholepis Baker to different air pollution sources, epiphyte samples were collected from a noncontaminated area in the province of Córdoba (Argentina) and transplanted to a control site as well as three areas categorized according to the presence of agricultural, urban, and industrial (metallurgical and metal-mechanical) emission sources. A foliar damage index (FDI) was calculated with the physiological parameters chlorophyll a, chlorophyll b, malondialdehyde (MDA), hydroperoxyconjugated dienes, sulfur (S) content, and dry weight-to-fresh weight ratio. In addition, electrical conductivity (E-cond), relative water content (RWC), dehydration kinetics (Kin-H(2)O), total phenols (T-phen), soluble proteins (S-prot), and activities of superoxide dismutase (SOD), catalase (CAT), and ascorbate peroxidase were determined. The parameters E-cond, FDI, SOD, RWC, and Kin-H(2)O can serve as suitable indicators of agricultural air pollution for T. tricholepis and T. capillaris, and CAT, Kin-H(2)O, and SOD can do the same for T. recurvata. In addition, MDA, T-phen, and S-prot proved to be appropriate indicators of urban pollution for T. recurvata. Moreover, FDI, E-cond, and SOD for T. recurvata and MDA for T. tricholepis, respectively, could be used to detect deleterious effects of industrial air pollution. © Springer Science+Business Media, LLC 2011

  13. Metals interaction tested in children’s hair originating from industrial and rural areas

    Directory of Open Access Journals (Sweden)

    Jerzy Kwapulinski

    2014-09-01

    Full Text Available Introduction. Different biological samples (blood, gallstone, teeth, hair serve as a biomarker of exposure to metals for many years. This method appeared to be useful not only in clinical medicine, but also in the studies on the environment. Aim. The study is to compare the amount of selected metals in children’s hair residing in industrial and rural areas. Material and methods. Research of occurrence of 12 metals in children’s hair at the age of 7, 10 and 14 living in an industrial (Nowy Bytom town and a rural (Strumień town areas has been presented. Determination of Pb, Cd, Ni, Co Na, K, Mg, Zn, Cu, Mn, Fe and Ca was carried out by atomic absorption spectrophotometry (AAS using a spectrometer PerkinElmer 400. Results. In the case of seven-year old children, regardless of gender a common mechanism of co-occurrence was noticed for manganese and calcium, manganese and magnesium, calcium and magnesium, sodium and potassium. Apart from the correlation of metals for the seven-year-old-children mentioned, in case of ten-year old children, an additional correlation between calcium and zinc appears. Conclusion: The amount of some metals in the hair with the diversified possibility of interaction between the metals themselves and their relation to gender and age of children revealed different environmental exposure.

  14. Sources of heavy metal pollution in agricultural soils of a rapidly industrializing area in the Yangtze Delta of China.

    Science.gov (United States)

    Xu, Xianghua; Zhao, Yongcun; Zhao, Xiaoyan; Wang, Yudong; Deng, Wenjing

    2014-10-01

    The rapid industrialization and urbanization in developing countries have increased pollution by heavy metals, which is a concern for human health and the environment. In this study, 230 surface soil samples (0-20cm) were collected from agricultural areas of Jiaxing, a rapidly industrializing area in the Yangtze Delta of China. Sequential Gaussian simulation (SGS) and multivariate factorial kriging analysis (FKA) were used to identify and explore the sources of heavy metal pollution for eight metals (Cu, Zn, Pb, Cr, Ni, Cd, Hg and As). Localized hot-spots of pollution were identified for Cu, Zn, Pb, Cr, Ni and Cd with area percentages of 0.48 percent, 0.58 percent, 2.84 percent, 2.41 percent, 0.74 percent, and 0.68 percent, respectively. The areas with Hg pollution covered approximately 38 percent whereas no potential pollution risk was found for As. The soil parent material and point sources of pollution had significant influences on Cr, Ni, Cu, Zn and Cd levels, except for the influence of agricultural management practices also accounted for micro-scale variations (nugget effect) for Cu and Zn pollution. Short-range (4km) diffusion processes had a significant influence on Cu levels, although they did not appear to be the dominant sources of Zn and Cd variation. The short-range diffusion pollution arising from current and historic industrial emissions and urbanization, and long-range (33km) variations in soil parent materials and/or diffusion jointly determined the current concentrations of soil Pb. The sources of Hg pollution risk may be attributed to the atmosphere deposition of industrial emission and historical use of Hg-containing pesticides. Copyright © 2014 Elsevier Inc. All rights reserved.

  15. 2005-2014 trends of PM10 source contributions in an industrialized area of southern Spain.

    Science.gov (United States)

    Li, Jiwei; Chen, Bing; de la Campa, Ana M Sánchez; Alastuey, Andrés; Querol, Xavier; de la Rosa, Jesus D

    2018-05-01

    Particulate matter with a diameter of 10 μm or less (PM10) using receptor modelling was determined at an urban (La Linea, LL) and an industrial area (Puente Mayorga, PMY) in Southern Spain with samples collected during 2005-2014. The concentrations of PM10 had been decreasing at both sites in three distinctive periods: 1) the initial PM10 levels approached or exceeded the Spain and EU PM10 annual guidelines of 40 μg/m 3 during 2005-2007 at LL and 2005-2009 at PMY; 2) then PM10 dropped by 25%-∼30 μg/m 3 during 2008-2011 at LL and during 2010-2011 at PMY; 3) since 2012, the PM10 concentrations gradually decreased to major elements. These PM components generally showed a decrease trend, in accord with the trend of PM10 reduction. A PMF model identified seven sources to PM10 contributions. Secondary sulfate, soil/urban/construction dust, and secondary nitrate showed significantly decreasing trends with reduction of 40-60% comparing to the initial levels. The road traffic contribution decreased by 14% from the first to third period. However, sea salt, oil combustion, and industrial metallurgical process had relative stable contributions. These source contribution changes are reasonably governed by the PM emission abatement actions implemented during the past decade, as well as the financial crisis, that accounted for a significant decrease of PM pollution in Southern Spain. We identified that the mitigation efforts on industry, fossil fuel combustion, and urban transportation during the past decade were successful for air quality improvement in a highly industrialized area in Southern Spain. Copyright © 2018 Elsevier Ltd. All rights reserved.

  16. Environmental Management System of Petroleum Industries: A case study of Oil and Gas Exploration in the Zamrud Field Conservation Areas

    Directory of Open Access Journals (Sweden)

    Onny Setiani

    2015-12-01

    Full Text Available ABSTRACT Background:The Zamrud Field is one of the oil fields managed by Caltex Pacific Indonesia (CPI a production sharing contractor of Pertamina. It is located in the Coastal Plain and  Pekanbaru (CPP Block. The government of Indonesia has designated Zamrud as a conservation area. The petroleum industry in Zamrud fields has received 14001 ISO Certificate on Environmental Management System. The production sharing contract between CPI and the Government of Indonesia expired in August 2002 Methods: .This case study describes how CPI managed the development  of oil and gas production and compared to  the environmental management system for  petroleum industries  that should be taken  in the Zamrud conservation areas. Results: A number of specific measures were employed by CPI  to protect this sensitive area including a green seismic project, zero-discharge drilling, water management, preservation of nature and regular monitoring and impact assessment. There are two  important points that should be in consideration  for the environmental management system by CPI in the Zamrud areas, including top soil utilization to maintain biological and nutrients quality and re-vegetation in all areas of significant disturbances. Conclusion: oil and gas  exploration and production in conservation areas has to be managed through high commitment to good environmental  and social practices. Key words     : Environmental Management System (EMS, Petroleum Industries, Zamrud Field

  17. Groundwater flow in the Venice lagoon and remediation of the Porto Marghera industrial area (Italy)

    Science.gov (United States)

    Beretta, Giovanni Pietro; Terrenghi, Jacopo

    2017-05-01

    This study aims to determine the groundwater flow in a large area of the Venice (northeast Italy) lagoon that is under great anthropogenic pressure, which is influencing the regional flow in the surficial aquifer (about 30 m depth). The area presents several elements that condition the groundwater flow: extraction by means of drainage pumps and wells; tidal fluctuation; impermeable barriers that define part of the coastline, rivers and artificial channels; precipitation; recharge, etc. All the elements were studied separately, and then they were brought together in a numerical groundwater flow model to estimate the impact of each one. Identification of the impact of each element will help to optimise the characteristics of the Porto Marghera remediation systems. Longstanding industrial activity has had a strong impact on the soil and groundwater quality, and expensive and complex emergency remediation measures in problematic locations have been undertaken to ensure the continuity of industrial and maritime activities. The land reclamation and remediation works withdraw 56-74% of the water budget, while recharge from the river accounts for about 21-48% of the input. Only 21-42% of groundwater in the modelled area is derived from natural recharge sources, untouched by human activity. The drop of the piezometric level due to the realization of the upgradient impermeable barrier can be counteracted with the reduction of the pumping rate of the remediation systems.

  18. A review of the epidemiological methods used to investigate the health impacts of air pollution around major industrial areas.

    Science.gov (United States)

    Pascal, Mathilde; Pascal, Laurence; Bidondo, Marie-Laure; Cochet, Amandine; Sarter, Hélène; Stempfelet, Morgane; Wagner, Vérène

    2013-01-01

    We performed a literature review to investigate how epidemiological studies have been used to assess the health consequences of living in the vicinity of industries. 77 papers on the chronic effects of air pollution around major industrial areas were reviewed. Major health themes were cancers (27 studies), morbidity (25 studies), mortality (7 studies), and birth outcome (7 studies). Only 3 studies investigated mental health. While studies were available from many different countries, a majority of papers came from the United Kingdom, Italy, and Spain. Several studies were motivated by concerns from the population or by previous observations of an overincidence of cases. Geographical ecological designs were largely used for studying cancer and mortality, including statistical designs to quantify a relationship between health indicators and exposure. Morbidity was frequently investigated through cross-sectional surveys on the respiratory health of children. Few multicenter studies were performed. In a majority of papers, exposed areas were defined based on the distance to the industry and were located from 20 km from the plants. Improving the exposure assessment would be an asset to future studies. Criteria to include industries in multicenter studies should be defined.

  19. Chromium and nickel in the soils of industrial areas at Asopos river basin

    Directory of Open Access Journals (Sweden)

    Athanassios Karayannis

    2016-07-01

    Full Text Available The purpose of this paper is to present and compare previous efforts aiming to investigate whether previous wastewater disposal practices in selected (four metal finishing facilities, located at Asopos river basin (near Athens at East-Central Greece, and resulted in relevant soil contamination. The work is focused mainly on Cr and Ni, which are the primary elements of concern in the Asopos river Basin area. To assess the natural geochemical levels of Cr and Ni, 30 soil samples were collected from locations that were assumed free of contamination. In these 30 soil samples, Cr concentration varied from 60 to 418 mg/kg, and Ni concentrations varied between 91 and 1200 mg/kg. A second group of soil samples consisted of more than 100 samples from drill cores and surface soil samples, assumed affected by the disposal of effluents of the metal finishing facilities and/or the relevant drainage of runoff water. A third group of samples consisted of 10 more surface soil samples collected in summer 2015 (campaigns by Sybilla ltd in the framework of EU IED Directive Baseline Site Investigation Study for two metal finishing units. The above mentioned groups of data were evaluated and compared with a fourth group of data (collected from Inofyta industrial area in the framework of EU funded project LIFE-CHARM “Chromium in Asopos groundwater system: Remediation technologies and Measures”. The conclusion of this study is that there is no indication of downstream pollution migration from the land-based treated effluents disposal of the above mentioned metal finishing facilities. Cr and Ni concentrations in the lower soil layers were of the same order of magnitude to those of the reference soils. On the contrary Inofyta Industrial Area soil seems to be rather contaminated and requires special attention.

  20. Absorption of Mercury from Polluted Soil by Rice Plant(Case Study: Farms of Amol Industrial Suburban Area

    Directory of Open Access Journals (Sweden)

    Fatemeh Ahmadipour

    2013-03-01

    Full Text Available Mercury has recognized as one of the most toxic heavy metals, which many industries generate and dispose to the environment. Few studies are done about mercury accumulation in soil and bioconcentration and transfer factor of mercury in rice plant cultivated in industrial areas. In this study samples were taken randomly from 10 farms in vicinity of Amol industrial suburban area with three replications. Samples were measured by the LECO AMA 254 Advanced Mercury Analyzer according to ASTM D-6733method. Also the parameters related to the quality of the soil were measured. The mean of mercury concentration in soil, root, stem and grain were found 0.031 ±0.012 mg/kg, 0.074 ±0.0163 mg/kg, 0.058 ±0.008 mg/kg and 0.051 ±0.0083 mg/kg respectively. The calculated transfer factor of mercury to various organs and bioconcentration factor were < 1 and 2.46 respectively. Pearson correlation test showed a positive correlation between mercury concentration in soil with mercury concentration in grain and also a negative correlation between pH with mercury concentration in root and soil. It is concluded that rice plant have high potential for phytoremediation of mercury from soil.

  1. Identification of sources of elevated concentrations of polycyclic aromatic hydrocarbons in an industrial area in Tianjin, China

    NARCIS (Netherlands)

    Jiao, W.T.; Lu, Y.L.; Li, J.; Han, Jingyi; Wang, T.Y.; Luo, W.; Shi, Y.J.; Wang, G.

    2009-01-01

    The concentrations of 16 polycyclic aromatic hydrocarbons (PAHs) were determined by gas chromatography equipped with a mass spectrometry detector in 105 topsoil samples from an industrial area around Bohai Bay, Tianjin in the North of China. Results demonstrated that concentrations of PAHs in 104

  2. Aerial radiological survey of the Industrial Reactor Laboratory and surrounding area Plainsboro, New Jersey

    International Nuclear Information System (INIS)

    1980-12-01

    An airborne radiological survey of a 6 km 2 area centered over the Industrial Reactor Laboratory was made 25-27 July 1979. Detected radioisotopes and their associated gamma ray exposure rates were consistent with that expected from normal background emitters, except at two locations described in this report. Count rates observed at 46 m altitude were converted to exposure rates at 1 m above the ground and are presented in the form of an isopleth map

  3. Data sources on landscape structure in a highly industrialized area

    Directory of Open Access Journals (Sweden)

    Mazurek Kinga

    2015-03-01

    Full Text Available Landscape may be described as a part of space characterized by a certain physiognomy, which is a dynamic system subject to evolution. An important factor influencing the type and condition of the landscape is human activity which shapes or rebuilds its structure. Interesting results may be obtained on comparison of archival cartographic materials with contemporary studies and zoning plans. The Upper Silesian Coal Basin is a region with a clearly transformed landscape. The determinant of the geographical environment transformation here is the anthropogenic factor. The study area includes the upper part of the Kłodnica catchment (229.6 sq km. The study is a review, and its aim is to systematize data sources used in the research on the transformation of landscape structure of a heavily industrialized area. In the first half of the nineteenth century created the "Urmesstischblätter" in the scale of 1:25 000. Afterwards preparations began to take new topographic images of the country (the "Messtischblätter". In the 1990s initiated the development of a new topographic map (in the scale of 1:10 000. Recent data source is for example the project CORINE Land Cover 2006. There are many of various sources of data on land cover. An important aspect is the proper selection of documents and maps, and their proper interpretation.

  4. Evaluation of Toluene Exposure in Workers at Industrial Area of Sidoarjo, Indonesia by Measurement of Urinary Hippuric Acid

    Directory of Open Access Journals (Sweden)

    Moch Sahri

    2013-12-01

    How to cite this article: Sahri M, Widajati N. Evaluation of Toluene Exposure in Workers at Industrial Area of Sidoarjo, Indonesia by Measurement of Urinary Hippuric Acid. Asia Pac J Med Toxicol 2013;2:145-9.

  5. Bio-monitoring of the most industrialized area in Poland: Trees' response to climate and anthropogenic environmental changes

    Science.gov (United States)

    Sensuła, Barbara; Wilczyński, Sławomir; Piotrowska, Natalia

    2017-04-01

    Silesia is one of the regions with the highest levels of air pollution in Europe, highly industrialized over the years and highly populated. In this study, trees (Pinus Sylvestris L.)growing in the heavily urbanized area in close proximity to point-source pollution emitters, such as a heat and power plant, nitrogen plant, and steelworks in Silesia (Poland), were analyzed as bio-indicators of contemporary environmental changes. Trees are a very good archive of ecosystem changes, becouse they are sensitive to climate changes and anthropogenic pollution. The pollution impacts human, plants and animal life and different ecosystem processes. The changes in the ecosystem can disturb the metabolism and physiological processes of trees, and consequently, they also have an effect on the wood structure, tree ring width and the isotopic composition of wood and its components. The analysed samples covered the time period of the development of industrialization and the modernization in the industrial sector in Poland. In Poland, the systematic long-term monitoring of air pollutants is generally restricted to rural point-source regions in urban areas. Even for those areas, air pollution emissions were not continually monitored and data is only available for the last decades. Tree ring series that present long-term data can be used to analyse the ecosystem changes, caused by human activities. The conifers investigated in this study have grown for many years under the stress of environmental contamination. We analysed the spatiotemporal distribution of growth reductions, the depth of reduction with respect to the distance from the emitter, the relationship between tree growth and radiocarbon and stable isotope composition and climate during the industry development period and during pro-ecological strategy application. Pines chronologies indicate that trees have a similar sensitivity to most climatic elements of the previous and given year, but there is also observed a different

  6. Volatile organic compounds (VOCs) emission characteristics and control strategies for a petrochemical industrial area in middle Taiwan.

    Science.gov (United States)

    Yen, Chia-Hsien; Horng, Jao-Jia

    2009-11-01

    This study investigated VOC emissions from the largest petrochemical industrial district in Taiwan and recommended some control measures to reduce VOC emissions. In addition to the petrochemical industry, the district encompasses a chemical and fiber industry, a plastics industry and a harbor, which together produce more than 95% of the VOC emissions in the area. The sequence of VOC emission was as follows: components (e.g., valves, flanges, and pumps) (47%) > tanks (29%) > stacks (15%) > wastewater treatment facility (6%) > loading (2%) > flares (1%). Other plants producing high-density polyethylene (HDPE), styrene, ethylene glycol (EG), gas oil, and iso-nonyl-alchol (INA) were measured to determine the VOC leaching in the district. The VOC emissions of these 35 plants (90% of all plants) were less than 100 tons/year. About 74% of the tanks were fixed-roof tanks that leached more VOCs than the other types of tanks. To reduce leaching, the components should be checked periodically, and companies should be required to follow the Taiwan EPA regulations. A VOC emission management system was developed in state implementation plans (SIPs) to inspect and reduce emissions in the industrial district.

  7. Aerosol pollution in urban and industrialized area under marine influence: physical-chemistry of particles

    International Nuclear Information System (INIS)

    Rimetz, J.

    2007-12-01

    Harbors for trade are known as highly urbanized and industrialized areas with important maritime, railway and road traffic. Industries are mainly represented by steel, cement works, and oil refineries. The maritime sector is becoming an even larger source of air pollution. Atmospheric NO x , SO 2 , O 3 levels and chemical analysis of airborne particulate matter were monitored in Dunkerque conurbation in 2005 and 2006. This study was included in the IRENI program. In low-pressure conditions, local pollutants are spread out far away the agglomeration, whereas, in high-pressure regimes, the atmospheric stability and sea-breezes allow an accumulation of pollutants over the urban zone. Size-resolved chemical analyses of particulate matter collected as function of the aerodynamic diameter (D a ) were performed. Ions (Na + , NH 4 + , Cl - , NO 3 - , SO 4 2- ), metals (Fe, Zn, Pb, Cd,...) and organic fraction (EC, OC) are associated with sub- or/and super-micron particles. The size, morphology and chemical species of individual particles collected selectively in the 12O 3 , Fe 3 O 4 , PbO,... containing particles emitted in the Dunkerque harbour area and aged sea-salt aerosol particles (NaCl, NaNO 3 ,...) from long range transport of air masses. Thin organic coatings from natural and anthropogenic origin are observed on the particles by ToF-SIMS imaging. (author)

  8. Pollution and health risk assessment of industrial and residential area based on metal and metalloids contents in soil and sediment samples from and around the petrochemical industry, Serbia

    Science.gov (United States)

    Relic, Dubravka; Sakan, Sanja; Andjelkovic, Ivan; Djordjevic, Dragana

    2017-04-01

    Within this study the investigation of pollution state of metal and metalloids contamination in soils and sediments samples of the petrochemical and nearby residential area is present. The pseudo-total concentrations of Ba, Cd, Co, Cu, Cr, Mn, Ni, Pb, V, Zn, As, Hg, and Se were monitored with ICP/OES. The pollution indices applied in this work, such as the enrichment factor, the pollution load index, the total enrichment factor, and the ecological risk index showed that some of the soil and sediment samples were highly polluted by Hg, Ba, Pb, Cd, Cr Cu and Zn. The highest pollution indices were calculated for Hg in samples from the petrochemical area: chloralkali plant, electrolysis factory, mercury disposal area, and in samples from the waste channel. The pollution indices of the samples from the residential area indicated that this area is not polluted by investigated elements. Besides the pollution indices, the metal and metalloids concentrations were used in the equations for calculating the health risk criteria. We calculate no carcinogenic and carcinogenic risks for the composite worker and residential people by usage adequate equations. In analyzed samples, the no carcinogenic risks were lower than 1. The highest values of carcinogenic risk were obtained in sediment samples from the waste channel within the petrochemical industry and the metal that mostly contributes to the highest carcinogenic risk is Cr. Correlation analysis of pollution indices and carcinogenic risks calculated from the residential area samples showed good correlations while this is not the case for an industrial area.

  9. Social cost benefit analysis of sustainable industrial areas

    International Nuclear Information System (INIS)

    Blom, M.J.; Schroten, A.

    2010-05-01

    In restructuring a industrial park many different interests are involved, such as space, business climate, environmental quality or landscape. The social cost-benefit analysis (SCBA) is a tool for mapping all current and future pros and cons (expressed in Euros) of a restructuring project for society as a whole as objective as possible. The SCBA manual for sustainable industrial parks describes how an SCBA can be performed and how the results could accommodate decisions made. SCBA pilots have been carried out for restructuring projects in four Dutch municipalities: Katwijk, Rijnwoude, Hardinxveld-Giessendam and Westland. [nl

  10. A regional synergy approach to energy recovery: The case of the Kwinana industrial area, Western Australia

    International Nuclear Information System (INIS)

    Beers, D. van; Biswas, W.K.

    2008-01-01

    Energy is a key issue in the Kwinana industrial area, Western Australia's major heavy industrial region, where the major energy consuming industries consume upto 80 PJ/yr of energy in their processes. Over the past decade, significant progress has been made towards the reduction of energy consumption and reduction of greenhouse gases in Kwinana. One way to further advance sustainable energy use is through the realisation of regional synergies. These concern the capture, recovery and reuse of by-products, water and energy between industries in close proximity. Kwinana is recognised as a leading edge example in regional synergy development, but more synergy opportunities appear to exist. The centre for sustainable resource processing (CSRP) is undertaking research to develop new synergies in Kwinana, including energy utility synergies. As part of the research, a methodology was developed and applied to identify and evaluate the economic, technical, and environmental feasibility of collaborative energy recovery opportunities from industry flue gases in Kwinana. The trial application demonstrated the significant potential to mitigate CO 2 emissions through energy recovery from flue gases by applying technologies to convert the embedded energy into useful thermal and electric applications. This article discusses the methodology and outcomes from the trial applications, including the impact of carbon taxes, reducing costs of emerging technologies, and increasing energy prices

  11. Characteristics, distribution and sources of polychlorinated biphenyls (PCBs) in coastal sediments from the heavily industrialized area of Asalouyeh, Iran.

    Science.gov (United States)

    Arfaeinia, Hossein; Asadgol, Zahra; Ahmadi, Ehsan; Seifi, Morteza; Moradi, Masoud; Dobaradaran, Sina

    2017-12-01

    In this research, the levels of polychlorinated biphenyls (PCBs) were investigated in the marine sediments of Asaluyeh harbor, in the Persian Gulf. The samples were taken from industrial, semi-industrial and urban regions. The mean concentration levels of total (Σ) 18 detected PCBs were 514.32, 144.67 and 31.6 pg/g dw for the industrial, semi-industrial and urban sampling stations, respectively. Based on a multivariate statistical analysis, it was found that high contamination levels of PCBs in sediments collected along the Persian Gulf were associated with releases from local industries. Total organic carbon (TOC) content was significantly and positively correlated with the concentrations of PCB congeners. World Health Organization toxic equivalents (TEQs) for PCBs ranged from 0.04 to 2.66 pg TEQ/g dry weight (dw) in the coastal sediments. The TEQ values in this study were higher than many reported worldwide in the literature for sediments. This suggests that there are high levels of contamination in the area due to industrial and other human activities.

  12. The ARIPAR project: analysis of the major accident risks connected with industrial and transportation activities in the Ravenna area

    International Nuclear Information System (INIS)

    Egidi, Demetrio; Foraboschi, Franco P.; Spadoni, Gigliola; Amendola, Aniello

    1995-01-01

    The paper describes the ARIPAR project aimed at the assessment of the major accident risks connected with storage, process and transportation of dangerous substances in the densely populated Ravenna area in Italy, which includes a large complex of chemical and petrochemical plants and minor industries, essentially distributed around an important commercial port. Large quantities of dangerous goods are involved in various transportation forms connected with the industrial and commercial activity of the port. The project started by making a complete inventory of fixed installations and transportation activities capable of provoking major fire, explosion and toxic release events; then relevant accident scenarios were developed for the single hazard sources; probabilities were assigned to the events and consequences were evaluated; finally iso-risk contours and F-N diagrams were evaluated both for the single sources and for the overall area. This required the development of a particular methodology for analysis of area risk and of associated software packages which allowed examination of the relative importance of the different activities and typologies of materials involved. The methodological approach and the results have proved to be very useful for the priority-ranking of risk mitigating interventions and physical planning in a complex area

  13. INAA for the characterization of airborne particulate matter from the industrial area of Islamabad city

    International Nuclear Information System (INIS)

    Wasim, M.; Rahman, A.; Waheed, S.; Daud, M.; Ahmad, S.

    2003-01-01

    Air particulate matter (PM) was collected in two size fractions using stacked filter units (SFUs) provided by the International Atomic Energy Agency (IAEA) from the industrial area of Islamabad. Nucleopore polycarbonate filters were used for collecting from Oct 98 to Jun 99 the particulate matter in coarse and fine size fractions. The samples were characterized by the instrumental neutron activation analysis (INAA). About 33 elements were quantified using different irradiation and counting protocols. (author)

  14. Guidelines for planning interventions against external exposure in industrial area after a nuclear accident. Pt. 1. A holistic approach of countermeasure application

    International Nuclear Information System (INIS)

    Eged, K.; Kis, Z.; Andersson, K.G.; Roed, J.; Varga, K.

    2003-01-01

    Following a large-scale release of radioactivity into the environment, different urban, industrial and rural environments may be contaminated for many years. Currently, there is limited systematic consideration of long-term management to ensure sustainability of areas contaminated by long-lived radionuclides. To sustain acceptable living and working conditions in such areas it is important to be able to construct robust, effective restoration strategies which address the many different types of environment, land use and ways of life. The overall objective of the STRATEGY project (directly addressing Key Action 2: Nuclear Fission - Off-site emergency management in the Fifth Framework Programme) is to establish a decision framework to enable the selection of robust and practicable remediation strategies for Member States, which enable the long-term sustainable management of contaminated areas. The special objectives of the work carried out by GSF - Radiation Protection Institute and presented in this report was to contribute to the different urban/industrial parts of the STRATEGY project. Countermeasures being different from the usual urban ones and largely applicable in industrial area are collected and evaluated. The industrial area is defined here as such an area where productive and/or commercial activity is carried out. A good example is a supermarket or a factory. In designing restoration strategies to ensure the long-term sustainability of large and varied contaminated areas, there is a requirement to adopt a more holistic approach rather than simply selecting cost-effective countermeasures. The potentially negative consequences of restoration must be fully considered. The implementation of a remediation strategy may lead to a reduced collective dose, but increased dose to those implementing the strategies. Countermeasures may themselves generate waste and the practical consideration of disposal options has to be addressed. There is also a requirement that the

  15. Physiological and chemical response of lichens transplanted in and around an industrial area of south Italy: relationship with the lichen diversity.

    Science.gov (United States)

    Paoli, Luca; Pisani, Tommaso; Guttová, Anna; Sardella, Giovanni; Loppi, Stefano

    2011-05-01

    The lichen Evernia prunastri (L.) Ach. has been exposed for 3 months in and around an industrial area of Mediterranean Italy for monitoring physiological (photosynthetic efficiency, membrane lipids peroxidation and cell membrane integrity) and chemical (bioaccumulation of the heavy metals Cr, Ni, Pb, V and Zn) effects and investigate the consistency with the environmental quality status depicted by the diversity of epiphytic lichens (index of lichen diversity (ILD)). The results showed that thalli transplanted close to the industrial area exhibited early stress symptoms, as revealed by the increase in electrical conductivity indicating a damage endured by lichen cell membranes. The electrical conductivity was inversely correlated with the diversity of epiphytic lichens recorded at the same sites. The ILD negatively correlated also with membrane lipid peroxidation and the rate of accumulation of Pb, V and Zn. Reciprocal correlations found among trace elements pinpointed vehicular traffic and metal processing in the industrial area as main sources. The damage endured by cell membranes was the best physiological indicator consistent with the air quality status depicted by the diversity of epiphytic lichens. Copyright © 2010 Elsevier Inc. All rights reserved.

  16. Contamination of soil and the medicinal plant Phyllanthus niruri Linn. with cadmium in ceramic industrial areas.

    Science.gov (United States)

    Santos, Vanessa Santana Vieira; Arantes, Karen Magalhães; Gonçalves, Ester Luiza; Campos, Carlos Fernando; de Campos Júnior, Edimar Olegário; de Oliveira, Antônio Marcos Machado; Pereira, Boscolli Barbosa

    2018-04-22

    Phyllanthus niruri is a plant that is used to prevent calcium oxalate crystallisation and to block the stone formation in urolithiasis. Contaminants in the environment can be readily taken up by medicinal plants due to their ability to absorb chemicals into their tissues. If contaminated plants are ingested, they have the potential to negatively affect human and environmental health. The aim of this study was to assess contamination in the soil and the medicinal plant P. niruri by cadmium (Cd) in ceramic industrial areas of Monte Carmelo, Brazil. Soil samples and plant samples (divided in root, shoot and leaves) were collected from a contaminated monitoring site and from a rural area (which was used as a reference site for comparative purposes). The Cd concentrations of the samples were analysed with an atomic absorption spectrometer. P. niruri was found to be sensitive to soil contamination by Cd that was attributed to ceramic industrial emissions. The results revealed that Cd bioaccumulation in the roots and shoots of P. niruri was associated with a significant increase (p risk of contamination of the site and the risk of a high dose of Cd to people exposed at the site.

  17. Industrialization Impact on Worker Mobility and Land Use in Peri Urban Area (Case study of Semarang District, Indonesia)

    Science.gov (United States)

    Wijaya, H. B.; Kurniawati, H.; Hutama, S. T. E. W.

    2018-02-01

    In many cases, industrialization has stimulated the urbanization process massively. It tends to attract substantial number of labor migrants from nearby region to fulfill the demand of workers. The paper reports the research result of industrialization phenomena in Semarang district, Indonesia. It carried out the survey by taking 250 samples of migrant workers. The result shows that the presence of labor-intensive industries becomes the most influence factor for many migrants, rather than the driving factors from the place of origin. The attraction factor could cover regional and across the province force, as indicated that all migrant respondents come from both inside and outside of Central Java Province. Furthermore, based on the land-use distribution of the migrant settlement area, it indicates a growing land-use change, both of land cover and land functions.

  18. Scientific and technological capabilities in health-related areas: opportunities, challenges, and interactions with the industrial sector.

    Science.gov (United States)

    Vargas, Marco Antonio; Britto, Jorge

    2016-11-03

    Characterization of the scientific and technological infrastructure in health and its interactions with the industrial sector provides key elements for understanding the dynamics of innovation in health. This study conducts an exploratory analysis of the potentialities and limitations associated with scientific and technological capabilities in the health area in Brazil and the different links between the scientific and industrial sectors in health. The analysis points to important growth in internationally indexed research output, especially in certain areas such as pharmaceutics, public health, genetics, morphology, physiology, and microbiology. There has also been important growth in research groups that interact with the industrial sector in selected areas of health. The study highlights the importance of building more solid and permanent bridges between companies, research institutions, and the health system, linking the knowledge developed in research institutions to the dynamics of the industrial sector in health. Resumo: A caracterização da infraestrutura científica e tecnológica na área da saúde e das suas formas de articulação com a base produtiva representam elementos centrais na compreensão da dinâmica de inovação em saúde. Este estudo faz uma análise exploratória sobre as potencialidades e limitações associadas às capacitações científicas e tecnológicas na área da saúde no Brasil e as formas de articulação entre a base científica e a base produtiva em saúde. A análise aponta para o crescimento expressivo da produção bibliográfica com circulação internacional no campo da saúde, particularmente em determinadas áreas como farmácia, saúde coletiva, genética, morfologia, fisiologia e microbiologia. Além disso, observa-se um crescimento expressivo dos grupos de pesquisa com relacionamentos com o setor produtivo em áreas selecionadas da saúde. Destaca-se a importância da construção de pontes mais sólidas e

  19. New support impulse in the area of industrial robots

    International Nuclear Information System (INIS)

    Martin, T.

    1982-06-01

    On this workshop problems of industrial robots were discussed by suppliers, users, and scientists. Such robots are used for handling workpieces and tools in the industry producing goods. Starting out from describing the state-of-the-art and latest experiences, development deficits are identified in detail. This includes hardware and software specifics as well as handling oriented product design and methods and tools for systems planning. (orig.) [de

  20. Implementation of new legislative measures on industrial risks prevention and control in urban areas

    International Nuclear Information System (INIS)

    Cahen, Bruno

    2006-01-01

    Incompatible at first sight, but vital to each other, the industry and the city have been developing a complex relationship for decades. From 1810 on in France, risk prevention and control in and around major industrial sites evolves step-by-step, learning from accidents. Land-use planning in the vicinity of SEVESO establishments becomes one of the key policies in the prevention of major industrial accident hazard on European level in 1996, focussing on historical situation of concern [M.D. Christou, S. Porter, Guidance on Land-use Planning as required by the Council Directive 96/82/EC. Joint Research Centre, European Commission, 1999]. The Toulouse (F) accidents, on 21 September 2001 evidenced the need for new tools to reinforce protective action and ease the situation of clusters of factories engulfed in the urban setting. In France, new legislative measures adopted on 30 July 2003 deeply modified the approach to land-use planning around the main dangerous facilities (622 establishments). The implementation of technological risk prevention plans [Fr. 'PPRT'] will limit the exposition of the population to the consequences of accidents. These plans, derived from the risk assessment (safety reports) produced by the operators of the hazardous facilities, will delineate areas within which requirements can be imposed on existing and future buildings and within which future building rights may be restricted. On the grounds of extremely serious danger that threatens human life, pre-existing constructions may be progressively expropriated. The financing of the corresponding measures, estimated a rough -bar 2-4 billions, will be defined by agreements among the Central Government, the industrial company and the local and regional bodies

  1. An approach to detecting delayed effects of radioactive contamination on industrial-urban-area dwellers

    International Nuclear Information System (INIS)

    Privalova, L.I.; Katsnelson, B.A.; Polzik, E.V.; Kazantsev, V.S.; Lipatov, G.Ya.; Beikin, Y.B.

    1994-01-01

    Detecting changes in humans that result from radioactive contamination of the area of residence many years after an incident (i.e., when the radiation has substantially decayed) presents a difficult epidemiological problem. Problems of this kind are even more complicated in areas where the population is continually exposed to other harmful man-made factors. The city of Kamensk-Uralsky (Sverdlovsk region, Russia) is a good case in point. In 1957, part of Kamensk-Uralsky was contaminated as the result of an accident at the Kyshtym nuclear plant. In addition, the population of the contaminated area is being exposed to atmospheric emissions from several industrial enterprises. Two comparable groups of residents were formed: one in the contaminated area and another in a control area within the same city characterized by similar levels of chemical pollution but substantially lower radioactive contamination. The groups were composed of only those people who had been living in these areas continually since time of the accident and who were under 15 years of age at the time of the accident. The groups were matched by sex, age, and socio-occupational characteristics. For each subject, data were gathered on more than 50 parameters including hematological, immunological, and biochemical indices of the health status. All these data were obtained from blood tests taken in the fall of 1992. Data processing was carried out with the help of a computerized mathematical pattern recognition methodology, which ensured reliable discrimination between the generalized health status in the areas under study. We found that the health status of inhabitants of the area more contaminated with radioactive fallouts were adversely affected by radiation

  2. Sustainable industrial estate by managing the building coverage ratio in Cibitung Industrial Town, Indonesia

    Science.gov (United States)

    Budiyanto, T. M. T.; Prajitno, I. S.; Hasibuan, H. S.

    2018-03-01

    The problem faced in the management of the industrial estate is the development of industrial buildings which are not in accordance with the existing environmental regulations, especially the building coverage ratio (BCR). This violation is due to the limitation of industrial land owned, and the tenant’s desire to maximize building area. This research conducted at Cibitung Industrial Town, Indonesia, to assess the compliance of industrial building in complying with environmental regulations, and efforts by industrial estate manager together with industrial communities to meet building regulations. The compliance is shown from the conformity of the tenant’s BCR to the building provisions contained in the regulation within the industrial estate; which is maximum 60% from land owned. And whether the rest of green open space (GOS) area can still be maintained at a minimum 10%. This study found tenant’s building density (BCR) at 24.55% population was 84.77%, and the rest of green open space at 21.56% population was only 2.49%. Excessive building development and expansion by the industrial communities, led to a continued reduction in green open space as a rainwater absorption area. It is resulting the rainfall runoff directly into the environmental drainage system, and causing flooding in the region.

  3. Blood biomonitoring of metals in subjects living near abandoned mining and active industrial areas.

    Science.gov (United States)

    Madeddu, Roberto; Tolu, Paola; Asara, Yolande; Farace, Cristiano; Forte, Giovanni; Bocca, Beatrice

    2013-07-01

    A human blood biomonitoring campaign to detect the environmental exposure to metals (Cd, Cu, Cr, Mn, Pb and Zn) in 265 subjects was performed in the South-Western part of Sardinia (an Italian island) that is a particular area with a great history of coal and metal mining (Pb/Zn mainly) activities and large industrial structures (as metallurgy). Subjects living near the industrial plant area had geometric means (GM) of blood Cd (0.79 μg/l), Cu (971 μg/l), Mn (12.2 μg/l), and Pb (55.7 μg/l) significantly higher than controls (Cd, 0.47 μg/l; Cu, 900 μg/l; Mn 9.98 μg/l; Pb, 26.5 μg/l) and than people living nearby the past mining sites. Subjects living next to one dismissed mine were statistically higher in blood Cu (GM, 1,022 μg/l) and Pb (GM, 41.4 μg/l) concentrations than controls. No differences were observed in people living in the different mining sites, and this might be related to the decennial disclosure of mines and the adoption of environmental remediation programmes. Some interindividual variables influenced blood biomonitoring data, as smoke and age for Cd, gender for Cu, age, sex and alcohol for Pb, and age for Zn. Moreover, blood metal levels of the whole population were similar to reference values representative of the Sardinian population and acceptably safe according to currently available health guidelines.

  4. Gastric and colorectal cancer mortality in an urban and industrialized area of Brazil Mortalidade por cânceres gástrico e colorretal em uma área urbana-industrial do Brasil

    Directory of Open Access Journals (Sweden)

    Marcilia de Araujo Medrado-Faria

    2001-04-01

    Full Text Available PURPOSE: To study the gastric and colorectal cancer mortalities and their relation to the urban-industrialization in Baixada Santista, located in the southeastern region of Brazil. METHODS: Selected from the registries of the State System of Data Analysis Foundation (SEADE were 1105 deaths due to gastric cancer (ICD 153--154 and 690 due to colorectal cancer (ICD 151 that occurred from 1980 to 1993 in males, above 10 years of age, residing in Baixada Santista. For each of these types of cancer, the standardized mortality rates, age-adjusted by world population in the 1960s, for 4 industrialized and 4 non-industrialized urban communities in that region were calculated. The ratios among those rates were calculated in order to compare the mortality in the periods 1980--93, 1980--1986, and 1987--1993. RESULTS: Standardized mortality rates for colorectal cancer were significantly higher in industrialized area, with ratios of 1.6 [95% CI 1.22 -- 2.29], 1.6 [95% CI 1.2 -- 2.0], and 1.6 [95% CI 1.3 -- 2.0] in the periods 1980--86, 1987--1993 and 1980--93, respectively. Gastric cancer did not show any statistical difference between the industrialized and non-industrialized areas, but there was a significant decrease in BS from the period 1980--1986 to 1987--1993. CONCLUSIONS: The significant elevation of colorectal cancer mortality in the industrialized area could be related to exposure to numerous carcinogens such as aromatic hydrocarbon, organic-chloride, metals, and industrial-port dust present in the region. Alternatively, the non-significant difference in gastric cancer between industrialized and non-industrialized areas and significant decrease in the last few years could be predominately reflecting the advances in the quality of life in urban areas. These results require further case-control studies that could help with the analysis of the associations among cancer and environmental factors (occupational, urban-industrial, habit, and life condition

  5. Polycyclic aromatic hydrocarbons (PAHs) in a large South American industrial coastal area (Santos Estuary, Southeastern Brazil): Sources and depositional history

    International Nuclear Information System (INIS)

    Martins, Cesar C.; Bicego, Marcia C.; Mahiques, Michel M.; Figueira, Rubens C.L.; Tessler, Moyses G.; Montone, Rosalinda C.

    2011-01-01

    Highlights: → In early 1980s, Santos Estuary became known as one of the worst polluted in the world. → PAHs levels were similar to the values reported for marine sediments worldwide. → PAHs analyses indicated multiple sources of these compounds (oil and pyrolitic origin). → The decline of oil consumption due to the world oil crisis (late 1970s) was shown. → The input of organic pollutants is a historical problem for the Santos Estuary. - Abstract: Located in southeastern Brazil, the Santos Estuary has the most important industrial and urban population area of South America. Since the 1950's, increased urbanization and industrialization near the estuary margins has caused the degradation of mangroves and has increased the discharge of sewage and industrial effluents. The main objectives of this work were to determine the concentrations and sources of polycyclic aromatic hydrocarbons (PAHs) in sediment cores in order to investigate the input of these substances in the last 50 years. The PAHs analyses indicated multiple sources of these compounds (oil and pyrolitic origin), basically anthropogenic contributions from biomass, coal and fossil fuels combustion. The distribution of PAHs in the cores was associated with the formation and development of Cubatao industrial complex and the Santos harbour, waste disposal, world oil crisis and the pollution control program, which results in the decrease of organic pollutants input in this area.

  6.   Transformation of the industrial harbor areas to housing areas

    DEFF Research Database (Denmark)

    Rehder, Meike

    2009-01-01

    Research question: How to read the universal (understood as the common and the social) and the individual (understood as the specific, private and intimate) in the meeting between urban and housing space? Questions in the project: How do the exterior spaces in these new harbour areas come to being......? What influences are at play in the development of them? What influences the approval and the functioning of these housing areas?...

  7. Effect of mercury and arsenic from industrial effluents on the drinking water and comparison of the water quality of polluted and non-polluted areas: a case study of Peshawar and Lower Dir.

    Science.gov (United States)

    Ishaq, M; Jan, F Akbar; Khan, Murad Ali; Ihsanullah, I; Ahmad, I; Shakirullah, M; Roohullah

    2013-02-01

    The purpose of the present study was to find out the sources of mercury and arsenic pollution of water in the industrial area of Peshawar, the capital of Khyber Pakhtunkhwa, Pakistan. Samples of effluents, mud, and water were collected from the target area (industrial area of Peshawar), the area of water supply source, and from the less polluted area, the Lower Dir district, as the control. Hg was determined by the cold vapor generation technique, while arsenic was determined using the electrothermal atomic absorption technique. Data of the water from the industrial area were compared with that of the source area, control area, as well as with the WHO and some international drinking water quality standards. The results show that some parameters, i.e., TDS, DO, pH, and hardness, were more than the permissible limits. Textile and glass industries were found to be the major sources of Hg and As pollution. Downstream dilution of these contaminants was also observed.

  8. Trends in arsenic levels in PM10 and PM 2.5 aerosol fractions in an industrialized area.

    Science.gov (United States)

    García-Aleix, J R; Delgado-Saborit, J M; Verdú-Martín, G; Amigó-Descarrega, J M; Esteve-Cano, V

    2014-01-01

    Arsenic is a toxic element that affects human health and is widely distributed in the environment. In the area of study, the main Spanish and second largest European industrial ceramic cluster, the main source of arsenic aerosol is related to the impurities in some boracic minerals used in the ceramic process. Epidemiological studies on cancer occurrence in Spain points out the study region as one with the greater risk of cancer. Concentrations of particulate matter and arsenic content in PM10 and PM2.5 were measured and characterized by ICP-MS in the area of study during the years 2005-2010. Concentrations of PM10 and its arsenic content range from 27 to 46 μg/m(3) and from 0.7 to 6 ng/m(3) in the industrial area, respectively, and from 25 to 40 μg/m(3) and from 0.7 to 2.8 ng/m(3) in the urban area, respectively. Concentrations of PM2.5 and its arsenic content range from 12 to 14 μg/m(3) and from 0.5 to 1.4 ng/m(3) in the urban background area, respectively. Most of the arsenic content is present in the fine fraction, with ratios of PM2.5/PM10 in the range of 0.65-0.87. PM10, PM2.5, and its arsenic content show a sharp decrease in recent years associated with the economic downturn, which severely hit the production of ceramic materials in the area under study. The sharp production decrease due to the economic crisis combined with several technological improvements in recent years such as substitution of boron, which contains As impurities as raw material, have reduced the concentrations of PM10, PM2.5, and As in air to an extent that currently meets the existing European regulations.

  9. Atmospheric concentrations, distributions and air-soil exchange tendencies of PAHs and PCBs in a heavily industrialized area in Kocaeli, Turkey.

    Science.gov (United States)

    Cetin, Banu; Yurdakul, Sema; Keles, Melek; Celik, Isil; Ozturk, Fatma; Dogan, Cevdet

    2017-09-01

    Dilovasi is one of the heavily industrialized areas in Turkey with serious environmental problems. In this study, the atmospheric concentration of PAHs and PCBs were measured for a whole year at 23 sites. The average ambient air Σ 15 PAH and Σ 41 PCB concentrations were found as 285 ± 431 ng m -3 and 4152 ± 6072 pg m -3 , respectively. PAH concentrations increased with decreasing temperature especially in urban areas, indicating the impact of residential heating. However, PCB concentrations mostly increased with temperature probably due to enhanced volatilization from their sources. The gradient obtained for PCBs, rural air were higher in industrial-urban areas than rural sites, showing that soil was a secondary source for PAHs. Fugacity ratios of PCBs were mostly <1.0 for the whole sampling period. Although the source/sink tendency of soil for some PCBs depends on their volatility, considering the whole data, PCBs were generally deposited to soil. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. Fresh water production from municipal waste water with RO membrane technology and its application for agriculture and industry in arid area

    International Nuclear Information System (INIS)

    Yokoyama, F

    2015-01-01

    One of the biggest problems of the 21st century is the global water shortage. Therefore it is difficult to increase the quantity of conventional water resources such as surface water and groundwater for agriculture and industry in arid area. Technical advancement in water treatment membrane technology including RO membrane has been remarkable especially in recent years. As the pore size of RO membrane is less than one nanometer, it is possible to produce the fresh water, which satisfies the drinking water quality standards, with utilizing RO membrane. In this report a new fresh water resource from municipal waste water is studied to apply to the plant factory which is the water saving type agriculture and industry in arid area

  11. Mass and elemental distributions of atmospheric particles nearby blast furnace and electric arc furnace operated industrial areas in Australia

    Energy Technology Data Exchange (ETDEWEB)

    Mohiuddin, Kazi, E-mail: kazi.mohiuddin@students.mq.edu.au [Graduate School of the Environment, Department of Environment and Geography, Faculty of Science, Macquarie University, NSW (Australia); Strezov, Vladimir; Nelson, Peter F. [Graduate School of the Environment, Department of Environment and Geography, Faculty of Science, Macquarie University, NSW (Australia); Stelcer, Eduard [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia); Evans, Tim [Graduate School of the Environment, Department of Environment and Geography, Faculty of Science, Macquarie University, NSW (Australia)

    2014-07-01

    The improved understanding of mass and elemental distributions of industrial air particles is important due to their heterogeneous atmospheric behaviour and impact on human health and the environment. In this study, particles of different size ranges were collected from three sites in Australia located in the vicinity of iron and steelmaking industries and one urban background site with very little industrial influence. In order to determine the importance of the type of industrial activity on the urban atmospheric quality, the industrial sites selected in this study were in the close proximity to two blast furnace operated and one electric arc furnace based steelmaking sites. The chemical compositions of the collected air particles were analysed using the proton induced X-ray emission (PIXE) technique. This study revealed significantly higher metal concentrations in the atmospheric particles collected in the industrial sites, comparing to the background urban site, demonstrating local influence of the industrial activities to the air quality. The modality types of the particles were found to be variable between the mass and elements, and among elements in the urban and industrial areas indicating that the elemental modal distribution is as important as particle mass for particle pollution modelling. The highest elemental number distribution at all studied sites occurred with particle size of 0.1 μm. Iron was found as the main dominant metal at the industrial atmosphere in each particle size range. The industrial Fe fraction in the submicron and ultrafine size particles was estimated at up to 95% which may be released from high temperature industrial activities with the iron and steelmaking industries being one of the major contributors. Hence, these industrial elemental loadings can highly influence the atmospheric pollution at local urban and regional levels and are required to consider in the atmospheric modelling settings. - Highlights: • Urban and

  12. Mass and elemental distributions of atmospheric particles nearby blast furnace and electric arc furnace operated industrial areas in Australia

    International Nuclear Information System (INIS)

    Mohiuddin, Kazi; Strezov, Vladimir; Nelson, Peter F.; Stelcer, Eduard; Evans, Tim

    2014-01-01

    The improved understanding of mass and elemental distributions of industrial air particles is important due to their heterogeneous atmospheric behaviour and impact on human health and the environment. In this study, particles of different size ranges were collected from three sites in Australia located in the vicinity of iron and steelmaking industries and one urban background site with very little industrial influence. In order to determine the importance of the type of industrial activity on the urban atmospheric quality, the industrial sites selected in this study were in the close proximity to two blast furnace operated and one electric arc furnace based steelmaking sites. The chemical compositions of the collected air particles were analysed using the proton induced X-ray emission (PIXE) technique. This study revealed significantly higher metal concentrations in the atmospheric particles collected in the industrial sites, comparing to the background urban site, demonstrating local influence of the industrial activities to the air quality. The modality types of the particles were found to be variable between the mass and elements, and among elements in the urban and industrial areas indicating that the elemental modal distribution is as important as particle mass for particle pollution modelling. The highest elemental number distribution at all studied sites occurred with particle size of 0.1 μm. Iron was found as the main dominant metal at the industrial atmosphere in each particle size range. The industrial Fe fraction in the submicron and ultrafine size particles was estimated at up to 95% which may be released from high temperature industrial activities with the iron and steelmaking industries being one of the major contributors. Hence, these industrial elemental loadings can highly influence the atmospheric pollution at local urban and regional levels and are required to consider in the atmospheric modelling settings. - Highlights: • Urban and

  13. 75 FR 26967 - Guidance for Industry: Use of Water by Food Manufacturers in Areas Subject to a Boil-Water...

    Science.gov (United States)

    2010-05-13

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-D-0236] Guidance for Industry: Use of Water by Food Manufacturers in Areas Subject to a Boil-Water Advisory; Availability AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY: The Food and Drug...

  14. Air pollution and urban climate in the Rhine--Westphalian industrial area and their influence on lichen growth on trees

    Energy Technology Data Exchange (ETDEWEB)

    Domroes, M

    1966-01-01

    Lichens on tree boles were examined on 25,114 trees along streets and areas in the central part of the Ruhr District and related to air pollution concentrations. The lichens were studied with regard to physiognomy, density, and exposition, and in relation to bark characteristics of tree species. Lichens were classified into the following areas: Lichen desert, transitional zone, or area of normal distribution. The lichens were sensitive to air pollution, especially sulfur dioxide emissions. The damaging influence of the town climate, especially aridity, was taken into consideration. Lichens were missing in all areas with a high degree of air pollution. These were areas of high density housing and of lower humidity than open country. Areas which had lower housing density and lower humidity also had increased lichen damage. Lichens were missing in the immediate neighborhood of factories or industrial areas outside towns. Lichen growth was reduced along busy roads.

  15. An exploratory study of services marketing in global markets: major areas of inquiry for the health care services industry.

    Science.gov (United States)

    Young, S; Erdem, S A

    1996-01-01

    It has been stated that one of the major challenges for the international marketer is the design of an efficient strategy for marketing services to international markets. This paper reviews some of the issues associated with services marketing in global markets along with the basic variables of service industries. An exploratory assessment of the health care services industry results in a list composed of several inquiry areas which should be examined by multinational companies. It is hoped that the review of the issues raised in this paper provides a basis for decision making and further research.

  16. Acute effects of urban and industrial pollution in a government-designated "Environmental risk area": the case of Brindisi, Italy.

    Science.gov (United States)

    Gianicolo, Emilio Antonio Luca; Bruni, Antonella; Mangia, Cristina; Cervino, Marco; Vigotti, Maria Angela

    2013-01-01

    Exposure to air pollutants has been associated with increased hospital admissions (HAs) for respiratory and cardiovascular diseases. This work describes a short-term epidemiological study in Brindisi, a highly industrialized town in Southern Italy. The effects of daily exposure to PM10 and NO2 on daily HAs for cardiac, respiratory, and cerebrovascular diseases were investigated by means of a case-crossover design in the period 2001-2007. Results showed positive associations between PM10 and HAs for cardiac and respiratory diseases and between NO2 and HAs for all the categories of diseases considered, particularly among females. Although not statistically significant, increased risk was observed for wind blowing from the port and the industrial area. Findings confirm the health risks associated with ambient air pollution exposure, even though NO2 and PM10 concentrations were below the legal limits. This may be due to the complex scenario of emissions in the area, which should be better investigated.

  17. The Importance of Building and Enhancing Worldwide Industry Cooperation in the Areas of Radiological Protection, Waste Management and Decommissioning

    International Nuclear Information System (INIS)

    Saint-Pierre, S.

    2006-01-01

    The slow or stagnant rate of nuclear power generation development in many developed countries over the last two decades has resulted in a significant shortage in the population of mid-career nuclear industry professionals. This shortage is even more pronounced in some specific areas of expertise such as radiological protection, waste management and decommissioning. This situation has occurred at a time when the renaissance of nuclear power and the globalization of the nuclear industry are steadily gaining momentum and when the industry's involvement in international and national debates in these three fields of expertise (and the industry's impact on these debates) is of vital importance. This paper presents the World Nuclear Association (WNA) approach to building and enhancing worldwide industry cooperation in radiological protection, waste management and decommissioning, which is manifested through the activities of the two WNA working groups on radiological protection (RPWG) and on waste management and decommissioning (WM and DWG). This paper also briefly describes the WNA's participatory role, as of summer 2005, in the International Atomic Energy Agency (IAEA) standard development committees on radiation safety (RASSC), waste safety (WASSC) and nuclear safety (NUSSC). This participation provides the worldwide nuclear industry with an opportunity to be part of IAEA's discussions on shaping changes to the control regime of IAEA safety standards. The review (and the prospect of a revision) of IAEA safety standards, which began in October 2005, makes this WNA participation and the industry ' s involvement at the national level timely and important. All of this excellent industry cooperation and team effort is done through 'collegial' exchanges between key industry experts, which help tackle important issues more effectively. The WNA is continuously looking to enhance its worldwide industry representation in these fields of expertise through the RPWG and WM and DWG

  18. The importance of building and enhancing worldwide industry cooperation in the areas of radiological protection, waste management and decommissioning

    International Nuclear Information System (INIS)

    Saint-Pierre, S.

    2006-01-01

    The slow or stagnant rate of nuclear power generation development in many developed countries over the last two decades has resulted in a significant shortage in the population of mid-career nuclear industry professionals. This shortage is even more pronounced in some specific areas of expertise such as radiological protection, waste management and decommissioning. This situation has occurred at a time when the renaissance of nuclear power and the globalization of the nuclear industry are steadily gaining momentum and when the industry's involvement in international and national debates in these three fields of expertise (and the industry's impact on these debates) is of vital importance. This paper presents the World Nuclear Association (WNA) approach to building and enhancing worldwide industry cooperation in radiological protection, waste management and decommissioning, which is manifested through the activities of the two WNA working groups on radiological protection (RPWG) and on waste management and decommissioning (WM and DWG). This paper also briefly describes the WNA's participatory role, as of Summer 2005, in the International Atomic Energy Agency (IAEA) standard development committees on radiation safety (RASSC), waste safety (WASSC) and nuclear safety (NUSSC). This participation provides the worldwide nuclear industry with an opportunity to be part of IAEA's discussions on shaping changes to the control regime of IAEA safety standards. The review (and the prospect of a revision) of IAEA safety standards, which began in October 2005, makes this WNA participation and the industry's involvement at the national level timely and important. All of this excellent industry cooperation and team effort is done through 'collegial' exchanges between key industry experts, which help tackle important issues more effectively. The WNA is continuously looking to enhance its worldwide industry representation in these fields of expertise through the RPWG and WM and DWG

  19. Multivariate Analyses of Heavy Metals in Surface Soil Around an Organized Industrial Area in Eskisehir, Turkey.

    Science.gov (United States)

    Malkoc, S; Yazici, B

    2017-02-01

    A total of 50 surface industrial area soil in Eskisehir, Turkey were collected and the concentrations of As, Cr, Cd, Co, Cu, Ni, Pb, Zn, Fe and Mg, at 11.34, 95.8, 1.37, 15.28, 33.06, 143.65, 14.34, 78.79 mg/kg, 188.80% and 78.70%, respectively. The EF values for As, Cu, Pb and Zn at a number of sampling sites were found to be the highest among metals. Igeo-index results show that the study area is moderately polluted with respect to As, Cd, Ni. According to guideline values of Turkey Environmental Quality Standard for Soils, there is no problem for Pb, but the Cd values are fairly high. However, Cr, Cu, Ni and Zn values mostly exceed the limits. Cluster analyses suggested that soil the contaminator values are homogenous in those sub classes. The prevention and remediation of the heavy metal soil pollution should focus on these high-risk areas in the future.

  20. Part of the inter ministerial commission of artificial radioelements (cirea) in the areas of medicine, research and industry

    International Nuclear Information System (INIS)

    Fages, D.Ph.

    2000-01-01

    The Inter ministerial commission of artificial radioelements (C.I.R.E.A.) has been implemented to regulate the production, import, use of artificial radioelements. It gives advices in areas such preparation, import, export, fabrication, calibration, transport, transfer as well as the general conditions of use, the measures of protection against the effects of radiations. The commission is divided in two sections: for the first one, it treats the questions relative to medical practices and human biology, for the second one it treats questions relative to others areas( agriculture, industry, research else than medical one). (N.C.)

  1. Eco-geochemical peculiarities of mercury content in solid residue of snow in the industrial enterprises impacted areas of Tomsk

    Science.gov (United States)

    Filimonenko, E. A.; Lyapina, E. E.; Talovskaya, A. V.; Parygina, I. A.

    2014-11-01

    Snow, as short-term consignation Wednesday, has several properties that lead to its widespread use in ecologicalgeochemical and geological research. By studying the chemical composition of the dust fallout you can indirectly assess the condition of atmospheric air.1-2. Determining the content of mercury in snow cover, you can define its contribution for the longest period of the year in our region, with the most intensive use of various types of fuel (coal, gas, firewood), that puts a strain on urban ecosystems in terms of ecology.3-4. In addition, snow cleans the atmosphere of mercury, but it accumulates in the snow, and during the spring melting of snow hits the ground and rivers, polluting them. Part of the mercury back into the atmosphere. It should also be note the special nature of the circulation of air masses over the city in winter, creating a heat CAP, which contributes to air pollution of the city. 5-6-7. The high load areas of industrial impact were detected during the eco-geochemical investigations of mercury load index in the impacted areas of enterprises of Tomsk. It was found out, that aerosol particles of industrial emissions in Tomsk contain mercury. The contamination transfer character of mercury sources and occurrence modes of pollutants in snow solid residue were detected during the researches of industrial impact.

  2. Water requirements of selected industries

    Science.gov (United States)

    ,; Mussey, Orville D.; Conklin, Howard L.; Durfor, Charles N.; Otts, Louis Ethelbert; Walling, Faulkner B.

    1955-01-01

    The early industries in America generally were established when and where demands for the products of industry arose. Most of the early industries were so located that their increasing requirements for transportation, raw materials, market, labor, and water supply could be satisfied economically. Many of these original plant locations have continued as modern industrial centers and their output has increased manyfold in meeting the demands of our growing Nation. The recent and current industrial expansion and the trend toward the growth of chemical industries, many Of which are heavy users of water, has resulted in a tremendous increase in the total withdrawal of water for industrial use as well as a large increase in the per capita use of water. This increase in industrial water requirement has strained the capacity of the developed water supplies in many areas, and in some instances the adequacy of the potential water supplies is questionable. The Geological Survey is engaged in preparing and publishing a series of reports describing the developed and undeveloped water resources of many important industrial areas. This work was started initially at the request of the National Securities Resources Board as a means to insure that water supplies are adequate for our rapidly expanding industrial development. Although many factors contribute to establishing the feasibility or even the limits of future industrial development, the one relating to available water supply is extremely important. A knowledge of the water requirements of various industries is valuable therefore in planning the logical development in any area where water supply is a critical factor. Thus far very little suitable information on the water requirements of our major industries is available for general planning. An inventory of unit water-use values in industry therefore would be generally helpful and also might tend to stimulate water-conservation methods. To obtain such information

  3. Environmental compliance in the petrochemical industry in the Sarnia area

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-04-01

    In February 2004, the Ontario Ministry of the Environment directed its Environmental SWAT Team to conduct a comprehensive inspection sweep of Sarnia's industrial sector to ensure that all facilities in that region were brought into compliance with environmental legislation. The primary focus was to inspect areas with the potential for future spills or unlawful discharges that could pose risks to human health or the environment. Legislative and regulatory gaps that could allow environmentally unsafe practices to exist at the facilities were also revealed. The inspection sweep involved comprehensive inspections of 35 petrochemical plant's air emissions, water discharges and spill prevention plans. SWAT officers examined waste management, laboratory operations and other areas that must meet environmental legislative requirements. Nearly all of the of facilities inspected during the sweep were found to be in non-compliance with one or more legislative or regulatory requirement. Common deficiencies included: no spill contingency or spill prevention plans; not having a Certificate of Approval for wastewater collection and treatment works or air emission control equipment; altering equipment, systems, processes, or structure contrary to the existing Certificate of Approval; and improper chemical handling, storage and identification. As a result of the inspection, 6 facilities were ordered to develop both a spill prevention plan and a spill contingency plan and 2 facilities were ordered to develop a spill prevention plan. SWAT officers have followed up to ensure that companies have taken appropriate corrective actions. The inspection revealed some of the sound practices undertaken at some facilities, such as containment; monitoring; prevention of discharge of contaminants to air or water; waste water and storm water treatment; contingency planning; and process hazard analysis of all key processes. refs., tabs., figs.

  4. Atmospheric dispersion of pollutants in an industrial area of Cuba

    International Nuclear Information System (INIS)

    Cruz Monte de Oca, Feliberto de la; Furet Bridon, Norma Raisa; Turtos Carbonell, Leonor; Lorente Vera, Mercedes

    2011-01-01

    Air pollution by different chemicals; take a great connotation in the world, given the adverse effects on ecosystems and particularly human health. The urban development, the modification of the land surface and the climate change, phenomena derived from a world population explosion, are altering the composition of the air. The atmosphere deposits pollutants in the water courses and in land, which harms not only the persons, but also to the animals and the plants of the ecosystem. To know as these pollutants are dispersed in the atmosphere it is very important in the establishment of better urban, regional and world predictions of the air quality. The present study aims to assess the local spread of sulphur dioxide, nitrogen oxides and particulate matter from an industrial zone. The study was done using the pollutant Gaussian Dispersion Models AERMOD. For the evaluation of contaminants were considered two modeling scenarios: urban and rural. The SO 2 concentrations (μg/m 3 ) were obtained for 1 h, 24 h and all period (1 year), exceeding the permissible limits (500, 50 y 20 μg/m 3 ). It was also recorded for each period the number of times SO 2 concentrations exceeded the reference values in each of the scenarios discussed (urban: 39, 61 y 39; rural: 99, 75 y 25). At the end of modeling in the urban setting, 39 recipients exceeded the reference value, occupying an area of 9.75 km 2 and 25 receivers in the case of the rural setting, for an area of 6.25 km 2 . For NOx and particulate matter concentrations estimated values were always below the reference values. The obtained results in this case show the potentiality of AERMOD system for the evaluation of atmospheric dispersion of pollutants

  5. “…then came Cisco, and the rest is history”: a ‘history friendly’ model of the Local Area Networking industry

    OpenAIRE

    R. Fontana; L. Zirulia

    2015-01-01

    We study the role that switching costs, compatibility, and mergers and acquisitions, play in influencing the evolution of a multi-market industry. By looking at the case of the Local Area Networking industry, we propose a 'history friendly model' to replicate its evolution during the 1990s. Our model explains how a firm can start from a dominant position in one of the existing markets and exploit switching costs and compatibility to enter a new market when it opens. Mergers and acquisitions a...

  6. Industrial waste heat for district heating

    International Nuclear Information System (INIS)

    Heitner, K.L.; Brooks, P.P.

    1982-01-01

    Presents 2 bounding evaluations of industrial waste heat availability. Surveys waste heat from 29 major industry groups at the 2-digit level in Standard Industrial Codes (SIC). Explains that waste heat availability in each industry was related to regional product sales, in order to estimate regional waste heat availability. Evaluates 4 selected industries at the 4-digit SIC level. Finds that industrial waste heat represents a significant energy resource in several urban areas, including Chicago and Los Angeles, where it could supply all of these areas residential heating and cooling load. Points out that there is a strong need to evaluate the available waste heat for more industries at the 4-digit level. Urges further studies to identify other useful industrial waste heat sources as well as potential waste heat users

  7. The potential for ore, industrial minerals and commercial stones in the Simpevarp area

    International Nuclear Information System (INIS)

    Lindroos, Hardy

    2004-10-01

    On behalf of SKB (the Swedish Nuclear Fuel and Waste Management Company), a survey has been made of existing information concerning the potential for ore, industrial minerals and commercial stones in and around the two candidate areas for a deep repository in Oskarshamn. A deep repository for spent nuclear fuel should not be located in a rock type or in an area where mineral extraction might be considered in the future, since this would make it difficult or impossible to exploit this natural resource. Avoiding such areas reduces the risk that people in the future will come into contact with the deep repository through mineral prospecting or mining activities.The survey has made use of the geoscientific information compiled in the more regional investigations in Oskarshamn Municipality in 1998-99. The new information after the municipal study includes extensive geophysical measurements from both the air and the ground. The results of the recently completed geophysical helicopter survey of the Simpevarp area are presented in a special chapter. The judgement of an area's ore potential is in part based on the evaluation of these geophysical measurements. In order to be better able to judge the ore potential, a geochemical investigation of soil samples, including reanalysing of older samples collected by the Geological Survey of Sweden (SGU), has been carried out. The report also discusses prospecting efforts in the area as well as relevant Swedish mining legislation. In cooperation with SGU a mineral resource map of the Simpevarp area has been prepared. The map shows two areas with a potential for commercial stones, namely the granites at Goetemar and Uthammar, situated in the northernmost respectively the southernmost part of the study area. Furthermore, the Goetemar granite has probably a small potential for ores containing tin (Sn) and/or wolfram (W). Although no mineralizations of this type have so far been found, the Goetemar granite area may be unsuitable or for

  8. The potential for ore, industrial minerals and commercial stones in the Simpevarp area

    Energy Technology Data Exchange (ETDEWEB)

    Lindroos, Hardy [MIRAB Mineral Resurser AB, Uppsla (Sweden)

    2004-10-01

    On behalf of SKB (the Swedish Nuclear Fuel and Waste Management Company), a survey has been made of existing information concerning the potential for ore, industrial minerals and commercial stones in and around the two candidate areas for a deep repository in Oskarshamn. A deep repository for spent nuclear fuel should not be located in a rock type or in an area where mineral extraction might be considered in the future, since this would make it difficult or impossible to exploit this natural resource. Avoiding such areas reduces the risk that people in the future will come into contact with the deep repository through mineral prospecting or mining activities.The survey has made use of the geoscientific information compiled in the more regional investigations in Oskarshamn Municipality in 1998-99. The new information after the municipal study includes extensive geophysical measurements from both the air and the ground. The results of the recently completed geophysical helicopter survey of the Simpevarp area are presented in a special chapter. The judgement of an area's ore potential is in part based on the evaluation of these geophysical measurements. In order to be better able to judge the ore potential, a geochemical investigation of soil samples, including reanalysing of older samples collected by the Geological Survey of Sweden (SGU), has been carried out. The report also discusses prospecting efforts in the area as well as relevant Swedish mining legislation. In cooperation with SGU a mineral resource map of the Simpevarp area has been prepared. The map shows two areas with a potential for commercial stones, namely the granites at Goetemar and Uthammar, situated in the northernmost respectively the southernmost part of the study area. Furthermore, the Goetemar granite has probably a small potential for ores containing tin (Sn) and/or wolfram (W). Although no mineralizations of this type have so far been found, the Goetemar granite area may be unsuitable or

  9. CSR in Industrial Clusters

    DEFF Research Database (Denmark)

    Lund-Thomsen, Peter; Pillay, Renginee G.

    2012-01-01

    Purpose – The paper seeks to review the literature on CSR in industrial clusters in developing countries, identifying the main strengths, weaknesses, and gaps in this literature, pointing to future research directions and policy implications in the area of CSR and industrial cluster development....... Design/methodology/approach – A literature review is conducted of both academic and policy-oriented writings that contain the keywords “industrial clusters” and “developing countries” in combination with one or more of the following terms: corporate social responsibility, environmental management, labor...... standards, child labor, climate change, social upgrading, and environmental upgrading. The authors examine the key themes in this literature, identify the main gaps, and point to areas where future work in this area could usefully be undertaken. Feedback has been sought from some of the leading authors...

  10. Environmental damage costs from airborne pollution of industrial activities in the greater Athens, Greece area and the resulting benefits from the introduction of BAT

    International Nuclear Information System (INIS)

    Mirasgedis, S.; Hontou, V.; Georgopoulou, E.; Sarafidis, Y.; Gakis, N.; Lalas, D.P.; Loukatos, A.; Gargoulas, N.; Mentzis, A.; Economidis, D.; Triantafilopoulos, T.; Korizi, K.; Mavrotas, G.

    2008-01-01

    Attributing costs to the environmental impacts associated with industrial activities can greatly assist in protecting human health and the natural environment as monetary values are capable of directly influencing technological and policy decisions without changing the rules of the market. This paper attempts to estimate the external cost attributable to the atmospheric pollution from 'medium and high environmental burden' industrial activities located in the greater Athens area and the benefits from Best Available Techniques (BAT) introduction. To this end a number of typical installations were defined to be used in conjunction with the Impact Pathway Approach developed in the context of the ExternE project to model all industrial sectors/sub-sectors located in the area of interest. Total environmental externalities due to air pollutants emitted by these industrial activities were found to reach 211 M Euro per year, associated mainly with human mortality and morbidity due to PM 10 emissions, as well as with climate change impacts due to CO 2 emissions for which non-metallic minerals and oil processing industries are the main sources. The results obtained can be used as the basis for an integrated evaluation of potential BAT, taking into account not only private costs and benefits but also the environmental externalities, thus leading to policy decisions that maximize social welfare in each industrial sector/sub-sector

  11. Using stable isotopes in tracing contaminant sources in an industrial area: A case study on the hydrological basin of the Olt River, Romania

    Energy Technology Data Exchange (ETDEWEB)

    Popescu, Raluca [National Research and Development Institute for Cryogenics and Isotopic Technologies, ICSI Ramnicu Valcea, 4 Uzinei Str, RO-240050 Ramnicu-Valcea (Romania); Mimmo, Tanja [Faculty of Science and Technology, Free University of Bozen-Bolzano, University Plaza no. 5, I-39100 Bolzano (Italy); Dinca, Oana Romina [National Research and Development Institute for Cryogenics and Isotopic Technologies, ICSI Ramnicu Valcea, 4 Uzinei Str, RO-240050 Ramnicu-Valcea (Romania); Capici, Calogero [Faculty of Science and Technology, Free University of Bozen-Bolzano, University Plaza no. 5, I-39100 Bolzano (Italy); Costinel, Diana; Sandru, Claudia [National Research and Development Institute for Cryogenics and Isotopic Technologies, ICSI Ramnicu Valcea, 4 Uzinei Str, RO-240050 Ramnicu-Valcea (Romania); Ionete, Roxana Elena, E-mail: roxana.ionete@icsi.ro [National Research and Development Institute for Cryogenics and Isotopic Technologies, ICSI Ramnicu Valcea, 4 Uzinei Str, RO-240050 Ramnicu-Valcea (Romania); Stefanescu, Ioan [National Research and Development Institute for Cryogenics and Isotopic Technologies, ICSI Ramnicu Valcea, 4 Uzinei Str, RO-240050 Ramnicu-Valcea (Romania); Axente, Damian [National Institute for Research and Development of Isotopic and Molecular Technologies, 65–103 Donath Str., RO-400293 Cluj-Napoca (Romania)

    2015-11-15

    Tracing pollution sources and transformation of nitrogen compounds in surface- and groundwater is an issue of great significance worldwide due to the increased human activity, translated in high demand of water resources and pollution. In this work, the hydrological basin of an important chemical industrial platform in Romania (Ramnicu Valcea industrial area) was characterized in terms of the physico-chemical and isotope composition of δ{sup 18}O and δ{sup 2}H in water samples and δ{sup 15}N of the inorganic nitrogen species. Throughout a period of one year, water samples from the Olt River and its more important tributaries were collected monthly in the industrial area, when the seasonal and spatial isotope patterns of the surface waters and the main sources of pollution were determined. Higher inorganic nitrogen concentrations (up to 10.2 mg N L{sup −1}) were measured between November 2012 and April 2013, which were designated as anthropogenic additions using the mixing calculations. The main sources of pollution with inorganic nitrogen were agriculture and residential release. The inorganic nitrogen from the industrial waste water duct had a distinct δ{sup 15}N fingerprint (mean of − 8.6‰). Also, one industrial release into the environment was identified for Olt River, at Ionesti site, in November 2012. The mean precipitation samples had the lowest inorganic nitrogen concentrations (less than 5.5 mg N L{sup −1}) with a distinct δ{sup 15}N fingerprint compared to the surface and industrial waters. - Highlights: • The main source of nitrogen pollution was agriculture/residential. • Anthropogenic additions of nitrogen were identified in the colder months. • Industrial nitrogen source was differentiated from the agriculture/residential one. • One industrial nitrogen release in the Olt River was observed during the study.

  12. Using stable isotopes in tracing contaminant sources in an industrial area: A case study on the hydrological basin of the Olt River, Romania

    International Nuclear Information System (INIS)

    Popescu, Raluca; Mimmo, Tanja; Dinca, Oana Romina; Capici, Calogero; Costinel, Diana; Sandru, Claudia; Ionete, Roxana Elena; Stefanescu, Ioan; Axente, Damian

    2015-01-01

    Tracing pollution sources and transformation of nitrogen compounds in surface- and groundwater is an issue of great significance worldwide due to the increased human activity, translated in high demand of water resources and pollution. In this work, the hydrological basin of an important chemical industrial platform in Romania (Ramnicu Valcea industrial area) was characterized in terms of the physico-chemical and isotope composition of δ 18 O and δ 2 H in water samples and δ 15 N of the inorganic nitrogen species. Throughout a period of one year, water samples from the Olt River and its more important tributaries were collected monthly in the industrial area, when the seasonal and spatial isotope patterns of the surface waters and the main sources of pollution were determined. Higher inorganic nitrogen concentrations (up to 10.2 mg N L −1 ) were measured between November 2012 and April 2013, which were designated as anthropogenic additions using the mixing calculations. The main sources of pollution with inorganic nitrogen were agriculture and residential release. The inorganic nitrogen from the industrial waste water duct had a distinct δ 15 N fingerprint (mean of − 8.6‰). Also, one industrial release into the environment was identified for Olt River, at Ionesti site, in November 2012. The mean precipitation samples had the lowest inorganic nitrogen concentrations (less than 5.5 mg N L −1 ) with a distinct δ 15 N fingerprint compared to the surface and industrial waters. - Highlights: • The main source of nitrogen pollution was agriculture/residential. • Anthropogenic additions of nitrogen were identified in the colder months. • Industrial nitrogen source was differentiated from the agriculture/residential one. • One industrial nitrogen release in the Olt River was observed during the study

  13. Arsenic, cadmium, and manganese levels in shellfish from Map Ta Phut, an industrial area in Thailand, and the potential toxic effects on human cells.

    Science.gov (United States)

    Rangkadilok, Nuchanart; Siripriwon, Pantaree; Nookabkaew, Sumontha; Suriyo, Tawit; Satayavivad, Jutamaad

    2015-01-01

    Map Ta Phut Industrial Estate is a major industrial area in Thailand for both petrochemical and heavy industries. The release of hazardous wastes and other pollutants from these industries increases the potential for contamination in foods in the surrounding area, especially farmed shellfish. This study determined the arsenic (As), cadmium (Cd), and manganese (Mn) concentrations in the edible flesh of farmed shellfish, including Perna viridis, Meretrix meretrix, and Scapharca inaequivalvis, around the Map Ta Phut area using inductively coupled plasma mass spectrometry. The results showed that shellfish samples contained high levels of total As [1.84-6.42 mg kg(-1) wet weight (ww)]. High Mn concentrations were found in P. viridis and M. meretrix, whereas S. inaequivalis contained the highest Cd. Arsenobetaine (AsB) was found to be the major As species in shellfish (>45% of total As). The in vitro cytotoxicity of these elements was evaluated using human cancer cells (T47D, A549, and Jurkat cells). An observed decrease in cell viability in T47D and Jurkat cells was mainly caused by exposure to inorganic As (iAs) or Mn but not to AsB or Cd. The combined elements (AsB+Mn+Cd) at concentrations predicted to result from the estimated daily intake of shellfish flesh by the local people showed significant cytotoxicity in T47D and Jurkat cells.

  14. UP-report. Energy intensive industry. Basis of the Development platform. Industry to the Swedish Energy Agency's strategy work FOKUS; UP-rapport. Energiintensiv industri. Underlag fraan Utvecklingsplattformen. Industri till Energimyndighetens strategiarbete FOKUS

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2012-11-01

    The report serves as input to the Swedish Energy Agency's strategies and priorities for research and innovation under the thematic area of energy intensive industry for the period 2011 - 2016. The report has been compiled by members of the Development platform Industry. This report provides background and conditions for the energy intensive industry, and proposed priorities and activities for future efforts in this area. The development platform has contributed with valuable experience and knowledge which enabled the Swedish Energy Agency to then develop a strategy that meets needs of the society and business.

  15. Perspective sources of industrial minerals for building industry in Novohrad (Southern Slovakia

    Directory of Open Access Journals (Sweden)

    Beláček Boris

    1999-03-01

    Full Text Available Novohrad a region of Southern Slovakia has wealthy industrial history, which was built mostly on local natural raw materials. Some deposits are exhausted, but other are ready to be exploited. Among such industrial minerals are raw materials for building industry. There are industrial minerals for fine and rough ceramics, stones for building and pavement, sand and gravel. The perspective areas are listed on Tab. 1 - 6 and are shown on Fig 1 - 3.

  16. Using stable isotopes in tracing contaminant sources in an industrial area: A case study on the hydrological basin of the Olt River, Romania.

    Science.gov (United States)

    Popescu, Raluca; Mimmo, Tanja; Dinca, Oana Romina; Capici, Calogero; Costinel, Diana; Sandru, Claudia; Ionete, Roxana Elena; Stefanescu, Ioan; Axente, Damian

    2015-11-15

    Tracing pollution sources and transformation of nitrogen compounds in surface- and groundwater is an issue of great significance worldwide due to the increased human activity, translated in high demand of water resources and pollution. In this work, the hydrological basin of an important chemical industrial platform in Romania (Ramnicu Valcea industrial area) was characterized in terms of the physico-chemical and isotope composition of δ(18)O and δ(2)H in water samples and δ(15)N of the inorganic nitrogen species. Throughout a period of one year, water samples from the Olt River and its more important tributaries were collected monthly in the industrial area, when the seasonal and spatial isotope patterns of the surface waters and the main sources of pollution were determined. Higher inorganic nitrogen concentrations (up to 10.2 mg N L(-1)) were measured between November 2012 and April 2013, which were designated as anthropogenic additions using the mixing calculations. The main sources of pollution with inorganic nitrogen were agriculture and residential release. The inorganic nitrogen from the industrial waste water duct had a distinct δ(15)N fingerprint (mean of -8.6‰). Also, one industrial release into the environment was identified for Olt River, at Ionesti site, in November 2012. The mean precipitation samples had the lowest inorganic nitrogen concentrations (less than 5.5 mg N L(-1)) with a distinct δ(15)N fingerprint compared to the surface and industrial waters. Copyright © 2015 Elsevier B.V. All rights reserved.

  17. Mass balance of emerging contaminants in the water cycle of a highly urbanized and industrialized area of Italy.

    Science.gov (United States)

    Castiglioni, Sara; Davoli, Enrico; Riva, Francesco; Palmiotto, Marinella; Camporini, Paolo; Manenti, Angela; Zuccato, Ettore

    2017-12-22

    The occurrence of several classes of emerging contaminants (ECs) was assessed in the River Lambro basin, one of the most urbanized and industrialized areas of Italy. The study aims were to identify the main sources of ECs, quantify their amounts circulating in the water cycle, and study their fate in the aquatic environment. More than 80 ECs were selected among pharmaceuticals (PHARM), personal care products (PCPs), disinfectants (DIS), illicit drugs (IDs), perfluorinated compounds (PERF), alkylphenols and bisphenol A (Alk-BPA), and anthropogenic markers (AM). Specific analytical methods were developed for quantitative analysis based on solid phase extraction and liquid chromatography tandem mass spectrometry. ECs were measured in rivers upstream and downstream of the main city (Milan), and in untreated and treated wastewater from Milan to assess the contribution to river contamination, and in superficial and deep groundwater in the city area to study the relationship between river and groundwater contamination. Samples were collected in a two-year monitoring campaign. Almost all ECs were ubiquitous in untreated wastewater, at concentrations up to the μg/L range, and the most abundant classes were PHARM and AM. Removals during different wastewater treatment processes were studied and the most stable substances were PHARM, PCPs and PERF. The mass loads increased for all the classes of ECs along the River Lambro basin. A mass balance was done in the river basin and allowed to identify the main sources of contamination, which were domestic, from treated or untreated wastewater, for PHARM, PCPs and IDs, mainly industrial for PERF, and both industrial and domestic for Alk-BPA. The study of AM helped to identify direct discharges of untreated wastewater. A substantial contribution of surface water to groundwater contamination was observed. This study improves the knowledge on occurrence, sources and fate of multiple classes of ECs in a highly urbanized area providing

  18. Risk perception of aquatic pollution originated from chemical industry clusters in the coastal area of Jiangsu province, China.

    Science.gov (United States)

    Yao, Hong; Liu, Bo; You, Zhen; Zhao, Li

    2018-02-01

    According to "the Layout Scheme of the Chemical Industry in Jiangsu Province From 2016 to 2030" and "the Development Planning in the Coastal Area of Jiangsu Province, China," several chemical industry clusters will be located in the coastal area of Jiangsu province, China, and the risk of surface water pollution will be inevitably higher in the densely populated region. To get to know the risk acceptance level of the residents near the clusters, public perception was analyzed from the five risk factors: the basic knowledge about the pollution, the negative effects on aquatic environment imposed by the clusters, the positive effects brought by the clusters, the trust of controlling aquatic pollution, and the acceptance of the clusters. Twenty-four statements were screened out to describe the five factors, and about 600 residents were covered in three typical clusters surveyed. On the whole, the youth showed a higher interest on the survey, and middle-aged people were likely to be more concerned about aquatic pollution incident. There was no significant difference on risk perception of the three clusters. The respondents investigated had good knowledge background on aquatic pollution and the residents identified with the benefits brought by the clusters. They were weak in risk awareness of pollution originated from the chemical enterprises' groups. Although the respondents regarded that chemical industry clusters did not expose all points of pollutants' generation to the public, they inclined to trust the administration agencies on controlling the pollution and welcome the construction of chemical clusters in their dwelling cities. Besides, risk perception showed obvious spatial distribution. The closer were the samples' sites to the clusters and the rivers receiving pollutants, the higher were the residents' perceived risk, benefit, and trust. However, there was no identical spatial difference on risk acceptance, which might be comprehensively influenced by various

  19. Atmospheric carbon tetrachloride in rural background and industry surrounded urban areas in Northern Iberian Peninsula: Mixing ratios, trends, and potential sources

    International Nuclear Information System (INIS)

    Blas, Maite de; Uria-Tellaetxe, Iratxe; Gomez, Maria Carmen; Navazo, Marino; Alonso, Lucio; García, Jose Antonio; Durana, Nieves; Iza, Jon; Ramón, Jarol Derley

    2016-01-01

    Latest investigations on atmospheric carbon tetrachloride (CTC) are focused on its ozone depleting potential, adverse effects on the human health, and radiative efficiency and Global Warming Potential as a greenhouse gas. CTC mixing ratios have been thoroughly studied since its restriction under the Montreal Protocol, mostly in remote areas with the aim of reporting long-term trends after its banning. The observed decrease of the CTC background mixing ratio, however, was not as strong as expected. In order to explain this behavior CTC lifetime should be adjusted by estimating the relative significance of its sinks and by identifying ongoing potential sources. Looking for possible sources, CTC was measured with high-time resolution in two sites in Northern Spain, using auto-GC systems and specifically developed acquisition and processing methodologies. The first site, Bilbao, is an urban area influenced by the surrounding industry, where measurements were performed with GC–MSD for a one-year period (2007–2008). The second site, at Valderejo Natural Park (VNP), is a rural background area where measurements were carried out with GC-FID and covering CTC data a nonsuccessive five-year period (2003–2005, 2010–2011, and 2014–2015 years). Median yearly CTC mixing ratios were slightly higher in the urban area (120 pptv) than in VNP (80–100 pptv). CTC was reported to be well mixed in the atmosphere and no sources were noticed to impact the rural site. The observed long-term trend in VNP was in agreement with the estimated global CTC emissions. In the urban site, apart from industrial and commercial CTC sources, chlorine-bleach products used as cleaning agents were reported as promotors of indoor sources. - Highlights: • A methodology was developed to measure CTC using GC-MSD and GC-FID. • CTC ongoing sources were noticed in an industry surrounded urban area. • No noticeable nearby CTC sources impacted the rural site. • Long-term CTC trend in agreement

  20. Atmospheric carbon tetrachloride in rural background and industry surrounded urban areas in Northern Iberian Peninsula: Mixing ratios, trends, and potential sources

    Energy Technology Data Exchange (ETDEWEB)

    Blas, Maite de, E-mail: maite.deblas@ehu.eus [School of Engineering of Bilbao, University of the Basque Country UPV/EHU (Spain); Uria-Tellaetxe, Iratxe; Gomez, Maria Carmen [School of Engineering of Bilbao, University of the Basque Country UPV/EHU (Spain); Navazo, Marino [University College of Engineering of Vitoria-Gasteiz, University of the Basque Country UPV/EHU (Spain); Alonso, Lucio; García, Jose Antonio; Durana, Nieves; Iza, Jon; Ramón, Jarol Derley [School of Engineering of Bilbao, University of the Basque Country UPV/EHU (Spain)

    2016-08-15

    Latest investigations on atmospheric carbon tetrachloride (CTC) are focused on its ozone depleting potential, adverse effects on the human health, and radiative efficiency and Global Warming Potential as a greenhouse gas. CTC mixing ratios have been thoroughly studied since its restriction under the Montreal Protocol, mostly in remote areas with the aim of reporting long-term trends after its banning. The observed decrease of the CTC background mixing ratio, however, was not as strong as expected. In order to explain this behavior CTC lifetime should be adjusted by estimating the relative significance of its sinks and by identifying ongoing potential sources. Looking for possible sources, CTC was measured with high-time resolution in two sites in Northern Spain, using auto-GC systems and specifically developed acquisition and processing methodologies. The first site, Bilbao, is an urban area influenced by the surrounding industry, where measurements were performed with GC–MSD for a one-year period (2007–2008). The second site, at Valderejo Natural Park (VNP), is a rural background area where measurements were carried out with GC-FID and covering CTC data a nonsuccessive five-year period (2003–2005, 2010–2011, and 2014–2015 years). Median yearly CTC mixing ratios were slightly higher in the urban area (120 pptv) than in VNP (80–100 pptv). CTC was reported to be well mixed in the atmosphere and no sources were noticed to impact the rural site. The observed long-term trend in VNP was in agreement with the estimated global CTC emissions. In the urban site, apart from industrial and commercial CTC sources, chlorine-bleach products used as cleaning agents were reported as promotors of indoor sources. - Highlights: • A methodology was developed to measure CTC using GC-MSD and GC-FID. • CTC ongoing sources were noticed in an industry surrounded urban area. • No noticeable nearby CTC sources impacted the rural site. • Long-term CTC trend in agreement

  1. The role of urban forest to reduce rain acid in urban industrial areas

    Science.gov (United States)

    Slamet, B.; Agustiarni, Y.; Hidayati; Basyuni, M.

    2018-03-01

    Urban forest has many functions mainly on improving the quality of the urban environment. One of the functions is to increase pH and reduce dangerous chemical content. The aim of the research is to find out the role of vegetation density of urban forest around the industrial area in reducing the acid rain. The condition of land cover was classified into four classes which are dense, medium, sparse and open area. The water of the throughfall and stemflow was taken from each type of land cover except in the open area. Parameters measured in this study are water acidity (pH), anion content (SO4 2- and NO3 -), cation content (Ca2+, Mg2+, and NH4 +) and electrical conductivity (EC). The results indicated that urban forest vegetation was able to increase the pH of rain water from 5.42 which is in an open area without vegetation to be 7.13 and 7.32 in dense and moderate vegetation cover by throughfall mechanism, respectively. Rain water acidity also decreased through stemflow mechanism with a pH ranged from 5.92 - 6.43. Urban forest vegetation decreased sulfate content (SO42-) from 528.67 mg/l in open area to 44 - 118 mg/l by throughfall mechanism and ranged from 90 to 366.67 mg/l through stemflow mechanism. Urban forest vegetation significantly decreased the rainwater nitrate content from 27 mg/l to 0.03 - 0.70 mg/l through the mechanism of throughfall and between 1.53 - 8.82 mg/l through the stemflow mechanism. Urban forest vegetation also increased the concentration of cations (NH4+, Ca2+, Mg2+, Na+) compared with open areas. Urban forest vegetation showed increased the electrical conductivity (EC) from 208.12 μmhos/cm to 344.67 - 902.17 μmhos/cm through the through fall mechanism and 937.67 - 1058.70 μmhos/cm through the stemflow mechanism. The study suggested that urban forests play a significant role in reducing rainwater acidity and improving the quality of rainwater that reached the soil surface.

  2. Insurance industry guide

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This is an insurance industry guide for the independent power industry. The directory includes the insurance company's name, address, telephone and FAX numbers and a description of the company's area of expertise, products and services, and limitations. The directory is international in scope. Some of the companies specialize in independent power projects

  3. Risk management for industrial safety

    International Nuclear Information System (INIS)

    Novogno, A.

    1989-01-01

    The catastrophic accidents which have occurred in the last decade, in both developed and developing countries, have drawn the attention of decision-makers in the safety area to the urgent necessity to assess and manage risks from hazardous industrial activities which are concentrated in large industrialized areas. The aim of this paper is to review experience gained in conducting studies in the area of 'comparisons of risks in energy systems' and on the practical application of 'cost effectiveness of risk reduction analysis among different energy systems' (case studies). It is also the aim of the paper to discuss and propose a general framework for defining an 'integrated approach' to risk assessment and management in highly industrialized regions within a country. (author)

  4. Utilization of IT in Pakistan and MNC Pharma. Companies in the Korangi Industrial Area

    Directory of Open Access Journals (Sweden)

    Raza Kamal

    2006-01-01

    Full Text Available This research explores the extent of usage of Informational Technology within the pharmaceutical firms based at Korangi Industrial Area. The findings substantiate the view that merely adding computing power will not add to productivity unless theemployees are well trained and the usage is dispersed in all the business processes simultaneously. The design of the research is based on instruments which have a high validity and the results show that there is no significant difference in the level of competence of employees between the Pakistani and the MNC. This may be so since the employees are from the same labour market where they have similar educational background and the firms (both national and multinational have not adequately invested in up grading their IT capabilities..

  5. Identification, Quantification, and Toxicity of PCDDs and PCDFs in Soils from Industrial Areas in the Central and Eastern Regions of Saudi Arabia.

    Science.gov (United States)

    Al-Wabel, Mohammad I; El-Saeid, Mohamed H; Usman, Adel R A; Al-Turki, Ali M; Ahmad, Mahtab; Hassanin, Ashraf S; El-Naggar, Ahmed H; Alenazi, Khaled K H

    2016-05-01

    This study was conducted to identify and quantify polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) in soil samples collected from selected industrial areas in the central and eastern regions of Saudi Arabia. All the investigated compounds of PCDDs/PCDFs were identified in the studied locations. The average concentrations of PCDDs (sum of seven congeners measured) ranged from 11.5 to 59.6 pg g(-1), with a maximum concentration of 125.7 pg g(-1) at an oil refinery station followed by 100.9 pg g(-1) at a cement factory. The average concentrations of PCDFs (sum of 10 congeners measured) accounted for 11.68-19.35 pg g(-1), with a maximum concentration of 38.67 pg g(-1) at the cement factory. It was generally observed that the soil samples collected from industrial areas have substantially high toxicity equivalence (TEQ) values of PCDDs/PCDFs compared to soils of remote areas. Principal component analysis revealed that the cement factories and oil refineries were the primary sources of PCDDs and PCDFs.

  6. Electronics Industry

    National Research Council Canada - National Science Library

    Ginter, Michael J; Andersen, James L; Becker, John A; Belliveau, Gerald E; Eppich, Frank J; Awai, Herman T; Hanko, David J; Hughes, Bob; Jones, Douglas; Larson, Kelly J

    2007-01-01

    .... area, New York State, Silicon Valley (California), Taiwan, and China. This approach provides a wide range of perspectives from which to examine the selected industry's current condition, outlook, and challenges...

  7. Marine organic geochemistry in industrially affected coastal areas in Greece: Hydrocarbons in surface sediments

    Science.gov (United States)

    Hatzianestis, Ioannis

    2015-04-01

    Hydrocarbons are abundant components of the organic material in coastal zones. Their sources are mainly anthropogenic, but several natural ones have also been recognized. Among hydrocarbons, the polycyclic aromatic ones (PAHs) have received special attention since they considered as hazardous environmental chemicals and are included in priority pollutant lists. The purpose of this study was to investigate the distribution, sources and transport pathways of hydrocarbons in marine areas in Greece directly influenced from the operation of major industrial units in the coastal zone by using a molecular marker approach, characteristic compositional patterns and related indices and also to evaluate their potential toxicity. Thirty two surface sediment samples were collected from three marine areas: a) Antikyra bay in Korinthiakos gulf, affected from the operation of an alumina and production plant b) Larymna bay in Noth Evoikos, affected from the operation of a nickel production plant and c) Aliveri bay in South Evoikos Gulf, affected from a cement production plant. In all the studied areas aquaculture and fishing activities have been also developed in the coastal zone. High aliphatic hydrocarbon (AHC) concentrations (~500 μg/g), indicating significant petroleum related inputs, were measured only in Antikyra bay. In all the other samples, AHC values were below 100 μg/g. N-alkanes were the most prominent resolved components (R) with an elevated odd to even carbon number preference, revealing the high importance of terrestrial inputs in the study areas. The unresolved complex mixture (UCM) was the major component of the aliphatic fraction (UCM/R > 4), indicating a chronic oil pollution. A series of hopanes were also identified, with patterns characteristic of oil-derived hydrocarbons, further confirming the presence of pollutant inputs from fossil fuel products. Extremely high PAH concentrations (> 100,000 ng/g) were found in the close vicinity of the alumina production

  8. Ecological Study on Hospitalizations for Cancer, Cardiovascular, and Respiratory Diseases in the Industrial Area of Etang-de-Berre in the South of France

    Directory of Open Access Journals (Sweden)

    Laurence Pascal

    2013-01-01

    Full Text Available The Etang-de-Berre area is a large industrialized area in the South of France, exposing 300,000 inhabitants to the plumes of its industries. The possible associated health risks are of the highest concern to the population, who asked for studies investigating their health status. A geographical ecological study based on standardized hospitalizations ratios for cancer, cardiovascular, and respiratory diseases was carried out over the 2004–2007 period. Exposure to air pollution was assessed using dispersion models coupled with a geographic information system to estimate an annual mean concentration of sulfur dioxide (SO2 for each district. Results showed an excess risk of hospitalization for myocardial infarction in women living in districts with medium or high SO2 exposure, respectively, 38% [CI 95% 4 : 83] and 54% [14 : 110] greater than women living in districts at the reference level exposure. A 26% [2 : 57] excess risk of hospitalization for myocardial infarction was also observed in men living in districts with high SO2 levels. No excess risk of hospitalization for respiratory diseases or for cancer was observed, except for acute leukemia in men only. Results illustrate the impact of industrial air pollution on the cardiovascular system and call for an improvement of the air quality in the area.

  9. Energy intensive industry for Alaska. Volume I: Alaskan cost factors; market factors; survey of energy-intensive industries

    Energy Technology Data Exchange (ETDEWEB)

    Swift, W.H.; Clement, M.; Baker, E.G.; Elliot, D.C.; Jacobsen, J.J.; Powers, T.B.; Rohrmann, C.A.; Schiefelbein, G.L.

    1978-09-01

    The Alaskan and product market factors influencing industry locations in the state are discussed and a survey of the most energy intensive industries was made. Factors external to Alaska that would influence development and the cost of energy and labor in Alaska are analyzed. Industries that are likely to be drawn to Alaska because of its energy resources are analyzed in terms of: the cost of using Alaska energy resources in Alaska as opposed to the Lower 48; skill-adjusted wage and salary differentials between relevant Alaskan areas and the Lower 48; and basic plant and equipment and other operating cost differentials between relevant Alaskan areas and the Lower 48. Screening and evaluation of the aluminum metal industry, cement industry, chlor-alkali industry, lime industry, production of methanol from coal, petroleum refining, and production of petrochemicals and agrichemicals from North Slope natural gas for development are made.

  10. Empoderamiento sanitario en entidades laborales de la zona industrial de Santiago de Cuba Health empowerment in working entities of the industrial area of Santiago de Cuba

    Directory of Open Access Journals (Sweden)

    Soraya Victoria Samada Durán

    2013-02-01

    Full Text Available Se realizó una intervención comunitaria en los trabajadores de 30 entidades laborales ubicadas en la zona industrial del municipio de Santiago de Cuba, durante el bienio 2009-2010, para establecer el empoderamiento sanitario en ellos. Entre los principales resultados figuró el logro de la capacitación de todos los líderes sindicales y políticos, así como de la brigada de vigilancia y lucha antivectorial, por el contrario de los dirigentes administrativos, de los cuales solo 86,6 % participó en el estudio porque no lo consideraban una responsabilidad inherente a su cargo. Respecto a la situación ambiental, se observó un incremento de los criaderos de Aedes aegypti durante la temporada lluviosa, asociado a una mayor acumulación de agua en los depósitos naturales o artificiales, o ambos; no obstante, hubo un impacto social en el ordenamiento del medio en 9 de estas instituciones a través de la integración de los intereses comunitarios, la planificación en conjunto y la evaluación participativa, que conformó la principal estrategia. Finalmente, se recomendó implementar este proceso de empoderamiento sanitario en el resto de los centros de trabajo de la zona industrial con vistas a prevenir las enfermedades transmitidas por mosquitos y roedores.A community intervention was performed in workers of 30 entities located in the industrial area of Santiago de Cuba municipality during the biennium 2009 -2010 to establish the health empowerment in them. Among the main results was the training for all union and political leaders and antivectorial surveillance and control brigade, unlike administrative leaders, of whom only 86.6% participated in the study because they considered it was not their responsibility. Regarding the environmental conditions, an increment of Aedes aegypti breeding sites was observed during the rainy season, associated with increased accumulation of water in natural or artificial reservoirs or both. However, there was

  11. Design and assessment of urban drainage and water reuse systems for the reconstruction of formerly industrial areas: a case in Beijing.

    Science.gov (United States)

    Liu, L; Zeng, S; Dong, X; Chen, J

    2013-01-01

    The Shougang Group is an industrial steel enterprise occupying 800 ha in Beijing that will cease production by 2010. The area will be converted to a new financial and commercial zone. The rebuilding of the water infrastructure in this area should address water shortages in Beijing and retain the industrial landmark of a large cooling water tank. A design framework and an assessment system with 11 indicators were developed for this purpose. Four reconstruction schemes are presented here. Scheme 1 is a traditional system that completely depends on outside the municipal facility. Schemes 2, 3, and 4 are systems to separately discharge greywater and blackwater. Scheme 4 uses a vacuum system that allows the reclamation of nutrients. Schemes 2 and 4 use wetland-treated greywater to fill the water tank. Scheme 3 reuses greywater for toilets after on-site treatment. Scheme 2 is recommended due to its lower cost, greater environmental benefit, moderate resource reclamation, and higher technical feasibility.

  12. Industrial accidents in radiological controlled areas: the importance of radiation protection in the organisation of the emergency aid

    International Nuclear Information System (INIS)

    Fenolland, J.L.; Laporte, E.

    2003-01-01

    After some disappointments when the first French nuclear units were started, it became clear that all the aspects linked to radio-protection needed to be taken into account in the context of emergency aid in the case of an industrial accident in radiological controlled area. In the case of an accident involving people, on-site first aid is provided by permanent services of the power plant. These teams are trained in first aid and fire-fighting. They are well trained in radioprotection. The specificity of an industrial event in controlled zone is that the victims' conventional injuries, whether it be a wound, a burn or a fracture, can be complicated by radioactive contamination. If it is justified, the exterior emergency services (firemen and medical teams) sire immediately called in. These teams are not necessarily trained in radioprotection. (authors)

  13. Mineralogy and origin of atmospheric particles in the industrial area of Huelva (SW Spain)

    Science.gov (United States)

    Bernabé, J. M.; Carretero, M. I.; Galán, E.

    The mineralogy of atmospheric particles at the confluence of the Tinto and Odiel rivers, south of Huelva (a highly industrialized city in the SW Spain), was characterized in view to identify source origins. In spite of the small amount of sample collected, mineralogical characterization was performed by X-ray diffraction, polarized light microscopy and scanning electron microscopy with EDS analysis system, using an adequate sample preparation methodology. Sedimentable (SP) and aerosols particles were sampled an one-week basis every two months for one year. Quartz, calcite and feldspars were found to be the major minerals in both fractions, and phyllosilicates, dolomite and gypsum were also identified in lower content. Minor mineral particles included barite, apatite, sphalerite and pyrite. SEM studies revealed the additional presence of chalcopyrite in both SP and aerosols, and of chalcocite-covellite, halite and sylvite in the latter. Siderite, hematite and ankerite were only detected in the SP fraction. The concentrations of the previous minerals increased in summer by effect of the limited rain and the resulting scarcity of atmosphere washing. Non-mineral particles detected by SEM in SP and aerosol fractions included spherical, biological and compositionally complex particles. The main source of mineral particles was found to be the soil suspension in addition to the metallurgical and fertilizer production industries in the area.

  14. Chemical profile of size-fractionated soils collected in a semiarid industrial area of Argentina

    Science.gov (United States)

    Morales Del Mastro, Anabella; Pereyra, Marcelo; Londonio, Agustín; Pereyra, Victoria; Rebagliati, Raúl Jiménez; Dawidowski, Laura; Gómez, Darío; Smichowski, Patricia

    2014-12-01

    A study was undertaken to assess the chemical profile of soil collected in Bahía Blanca (Argentina). In this industrial city, semiarid soils are affected by different industrial and agricultural activities, the presence of a saltpeter extraction facility, traffic and increasing urbanization. Sixteen soil samples (superficial and sub-superficial) were collected. Samples were sieved in two fractions (A plasma optical emission spectrometry (ICP OES). Anions (Cl-, F-, SO42-) and cations (K+, Na+ and NH4+) were determined by high performance liquid chromatography (HPLC) after an aqueous extraction. As expected, crustal elements namely, Al, Ca, Fe, Mg and Ti exhibited the highest concentrations. Mean elemental concentration ranged from Na+ ≅ SO42- > K+ > NO3-. Three indicators, namely, (i) coefficient of variation, (ii) coefficient of divergence and (iii) ratio of elemental concentration with respect to Ca were used to assess chemical, spatial and inter-profile variability. Chloride > Ca > Na+ > Mo > SO42-, dominated the variability indicating that these are key chemical markers for future assessment of crustal contribution to airborne particles in the area. The ratios Xi/Ca allowed discriminating the soil of the semi-arid region surrounding Bahía Blanca. The chemical profiles obtained in this study, particularly those of topsoil, will be a key input to characterize soil resuspension and its contribution to airborne particulate matter in a forthcoming receptor model analysis.

  15. Assessment of industry needs for oil shale research and development

    Energy Technology Data Exchange (ETDEWEB)

    Hackworth, J.H.

    1987-05-01

    Thirty-one industry people were contacted to provide input on oil shale in three subject areas. The first area of discussion dealt with industry's view of the shape of the future oil shale industry; the technology, the costs, the participants, the resources used, etc. It assessed the types and scale of the technologies that will form the industry, and how the US resource will be used. The second subject examined oil shale R D needs and priorities and potential new areas of research. The third area of discussion sought industry comments on what they felt should be the role of the DOE (and in a larger sense the US government) in fostering activities that will lead to a future commercial US oil shale shale industry.

  16. Mapping of wine industry

    Directory of Open Access Journals (Sweden)

    Віліна Пересадько

    2016-10-01

    Full Text Available Having reviewed a variety of approaches to understanding the essence of wine industry, having studied the modern ideas about the future of wine industry, having analyzed more than 50 maps from the Internet we have set the trends and special features of wine industry mapping in the world, such as: - the vast majority of maps displays the development of the industry at regional or national level, whereas there are practically no world maps; - wine-growing regions are represented on maps very unevenly; - all existing maps of the industry could be classified as analytical ascertaining inventory type; - the dominant ways of cartographic representation are area method and qualitative background method, sign method and collation maps are rarely used; - basically all the Internet maps have low quality as they are scanned images with poor resolution; - the special feature of maps published lately is lack of geographical basis (except for state borders and coastline. We created wine production and consumption world map «Wine Industry» in the scale of 1:60 000 000 with simple geographical basis (state names, state borders, major rivers, coastline. It was concluded that from the methodological point of view it is incorrect not to show geographical basis on maps of wine industry. Analysis of this map allowed us to identify areas of traditional wine-making, potential wine-making areas and countries which claim to be the world leaders in the field of wine production. We found disbalans between wine production and wine consumption - increasing wine production in South America, China and the United States and increasing wine consumption (mainly due to the import products in countries where the grape is not the primary agricultural product.

  17. Plastic Technology (Production). Industrial Arts, Senior High--Level II. North Dakota Senior High Industrial Arts Curriculum Guides.

    Science.gov (United States)

    Claus, Robert; And Others

    This course guide for a plastic technology course is one of four developed for the production area in the North Dakota senior high industrial arts education program. (Eight other guides are available for two other areas of Industrial Arts--energy/power and graphic communications.) Part 1 provides such introductory information as a definition and…

  18. Using a source-receptor approach to characterise VOC behaviour in a French urban area influenced by industrial emissions. Part II: source contribution assessment using the Chemical Mass Balance (CMB) model.

    Science.gov (United States)

    Badol, Caroline; Locoge, Nadine; Galloo, Jean-Claude

    2008-01-25

    In Part I of this study (Badol C, Locoge N, Leonardis T, Gallo JC. Using a source-receptor approach to characterise VOC behaviour in a French urban area influenced by industrial emissions, Part I: Study area description, data set acquisition and qualitative data analysis of the data set. Sci Total Environ 2007; submitted as companion manuscript.) the study area, acquisition of the one-year data set and qualitative analysis of the data set have been described. In Part II a source profile has been established for each activity present in the study area: 6 profiles (urban heating, solvent use, natural gas leakage, biogenic emissions, gasoline evaporation and vehicle exhaust) have been extracted from literature to characterise urban sources, 7 industrial profiles have been established via canister sampling around industrial plants (hydrocarbon cracking, oil refinery, hydrocarbon storage, lubricant storage, lubricant refinery, surface treatment and metallurgy). The CMB model is briefly described and its implementation is discussed through the selection of source profiles and fitting species. Main results of CMB modellings for the Dunkerque area are presented. (1) The daily evolution of source contributions for the urban wind sector shows that the vehicle exhaust source contribution varies between 40 and 55% and its relative increase at traffic rush hours is hardly perceptible. (2) The relative contribution of vehicle exhaust varies from 55% in winter down to 30% in summer. This decrease is due to the increase of the relative contribution of hydrocarbon storage source reaching up to 20% in summer. (3) The evolution of source contributions with wind directions has confirmed that in urban wind sectors the contribution of vehicle exhaust dominate with around 45-55%. For the other wind sectors that include some industrial plants, the contribution of industrial sources is around 60% and could reach 80% for the sector 280-310 degrees , which corresponds to the most dense

  19. Physical parameters of groundwater as indicators of pollution in industrial areas of Taxila, Wah and Hasanabdal

    International Nuclear Information System (INIS)

    Khan, M.S.; Zaheer-ud-Dln-Qureshi

    2004-01-01

    The Wah area historically famous for having sweet aquifer system is greatly effected due to environmental activities, such as industrialization and poor sewage system in the recent past. Thirty water samples have been collected from dug wells penetrating to shallow two layers in a multi layered aquifer system. The shallow aquifer is located at a depth of 45-85 feet and composed of very fine grained sand to silt in two layers separated by silty clay. To assess the contamination problems, physical parameters of groundwater such as temperature, color, turbidity, odour and taste have been estimated fifty percent of the dug wells have been found as contaminated and not fit for human consumption according 10 WHO standards. High values of electrical conductance determined in fifty percent of wells show trends of chemical contamination and their probable sources near by these wells against the general recharge pattern prevailing in the area can be located. (author)

  20. An insight into recent consanguinity within the Basque area in Spain. Effects of autochthony, industrialization and demographic changes.

    Science.gov (United States)

    Alfonso-Sanchez, M A; Peña, J A; Aresti, U; Calderón, R

    2001-01-01

    The importance of studying the genetic kinship of those human groups characterized by a deeply rooted ethnicity has traditionally been and still is an interesting goal of anthropological and population genetic studies. However, only a few surveys have aimed to learn about the impact of industrial development on the consanguinity of these populations and even those have concentrated on industrialized regions. This approach is worth analysing in Spain, where industrialization was late in relation to other western European countries. In this work we analyse the characteristics of inbreeding in Guipúzcoa from 1951 to 1995. This Basque province underwent industrial and tourist development earlier than other Spanish regions. It has the highest density of Basque speakers and has always occupied a central position within the map of distribution of the Basque language. Guipúzcoa is geographically placed in the core of the Basque area. SUDJECTS AND METHODS: Data on consanguineous marriages recorded in the province of Guipúzcoa between 1951 and 1995 were taken from Roman Catholic dispensations stored in the Diocesan Archives of San Sebastián, the province's capital city. Over the whole time period, a total of 1152 consanguineous marriages were registered. The high frequencies of first cousin (M22) (F = 1/16) and uncle-niece, aunt-nephew (M12) (F = 1/8) consanguineous marriages distinguish Guipúzcoa from the rest of Iberian populations. The M22/M33 ratio (with M33 being second cousins) has never dropped below 0.67, which represents a significant deviation from the expectation value of 0.25. When consanguineous marriages are classified according to marriage partner birthplaces interesting results emerge. Provincial endogamy shows the highest consanguinity rates (57%) and the proportion of M22/M33 is also rather high (0.63). However, a major contribution to the consanguinity levels and mean inbreeding coefficient recorded in Guipúzcoa over recent decades has been made by

  1. Air quality of the industrial area of Padova. SO2 and micropollutants concentration measurements around the incenerator of domestic wastes

    Energy Technology Data Exchange (ETDEWEB)

    Baracco, L [Amministrazione Provinciale di Padova; Boschi, G

    1986-04-01

    Some data related to one year measurements of SO2 concentrations and of suspended solid particles taken by Environmental Monitoring Station of the Provincial Network of Padua, located near the Industrial Area, are reported. In addition is reported a series of analytical determinations of heavy metals and organic micropollutants carried out in the same area by the Municipal Refuse Collection and public Health Services. The obtained results indicate that the concentration of SO2 in the area is well within the law limits while, as far as the suspended solid particles are concerned, it points out that the respect of the imposed limits, must be carefully evaluated in regards to new urbans developments and air cleaning plants which are going to be arranged by the Veneto.

  2. Inkjet printing as a roll-to-roll compatible technology for the production of large area electronic devices on a pre-industrial scale

    NARCIS (Netherlands)

    Teunissen, P.; Rubingh, E.; Lammeren, T. van; Abbel, R.J.; Groen, P.

    2014-01-01

    Inkjet printing is a promising approach towards the solution processing of electronic devices on an industrial scale. Of particular interest is the production of high-end applications such as large area OLEDs on flexible substrates. Roll-to-roll (R2R) processing technologies involving inkjet

  3. Final construction quality assurance report for the Y-12 Industrial Landfill V, Area 2, Oak Ridge, Tennessee

    International Nuclear Information System (INIS)

    Bessom, W.H.

    1996-11-01

    Lockheed Martin Energy Systems (LMES) has finished construction of Area 2 of the Y-12 Plant Industrial Landfill (ILF-V), classified as a Class 2 Landfill. This final Construction Quality Assurance (CQA) Report provides documentation that Area 2 was constructed in substantial compliance with the Tennessee Department of Environment and Conservation (TDEC) approved design, as indicated and specified in the permit drawings, approved changes, and specifications. This report applies specifically to the Area 2 excavation, compacted clay soil liner, geomembrane liner, granular leachate collection layer, protective soil cover, and the leachate collection system. An ''As-Built'' survey was performed and is included. The drawings provide horizontal and vertical information for Area 2, the anchor trench, the leachate collection pipe, the temporary access road, and cross-sections of Area 2. This report provides documentation of the following items: the excavation activities of Area 2; the maximum recompacted coefficient of hydraulic conductivity or permeability of the soil is less than 1 x 10 -7 centimeters per second (cm/sec); the total thickness of the compacted clay soil liner equals a minimum of 2 feet; a 40 mil impermeable geomembrane (polypropylene) flexible membrane liner (FML) and 16 oz. geotextile fabric was placed in direct contact with the compacted clay soil liner; a 12 inch granular leachate collection layer was installed and covered with a 8 oz. geotextile separation fabric; the installation of the leachate collection piping; and the two foot protective clay soil cover

  4. Dynamic of pollutants concentration in forest stands from Copsa Mica industrial area

    Directory of Open Access Journals (Sweden)

    Marian Ianculescu

    2009-11-01

    Full Text Available The paper presents the dynamics of pollutants concentrations from nonferrous metallurgical plant in Copºa Mica, considered, between the years 1985 -1989, as the most polluted area, even in the world, and detected as a large black spot on Landsat satellite imagery.Returning to investigations in this area, after 20-25 years, the pollution activity was changed after 1990, as a consequence of the reductionof industrial capacity, including the black smoke plant decommissioning, and the chimney built for exhaust pollutants over 350 m feet high, resulted some conclusions, necessary for decisions that have to be taken by environmental, forestry, health andagriculture authorities.The litter, soil and vegetation samples were colected from the same permanent sample plots between the years 2006-2009, as between the years 1985-1989, using the same methods, in order to be compared and analyzed. Therefore, returning to investigations in these permanent sample plots, were found the following conclusions: i between the period 1985 - 1989, in all examined cases were revealed high pollutants concentrations, even exceeding the maximum allowable limit (MAL consisting of suphur compounds in synergistic action with heavy metals(Cu, Pb, Cd, Zn, Mn, etc., in vegetation and litter, which was directly correlatedwith noxious concentrations in the air, and concentrations below MAL in soil samples; ii contrary, regarding the new pollution activity, it has been revealed low noxious concentration, in vegetation, litter and soil samples collected during the period between the years 2006-2008, which are directly related to their low concentrationlevel in the air. Due to pollutants accumulation phenomenon over the years, high pollutants concentrations, ten times higher than MAL, were found in the superior soil layer. In such circumstances the best solution to protect the environment, population and livestock of the damaged area, for tens of thousands of hectares, is the closure

  5. Seawater quality assessment and identification of pollution sources along the central coastal area of Gabes Gulf (SE Tunisia): Evidence of industrial impact and implications for marine environment protection.

    Science.gov (United States)

    El Zrelli, Radhouan; Rabaoui, Lotfi; Ben Alaya, Mohsen; Daghbouj, Nabil; Castet, Sylvie; Besson, Philippe; Michel, Sylvain; Bejaoui, Nejla; Courjault-Radé, Pierre

    2018-02-01

    Temperature, pH and trace elements (F, P, Cr, Cu, Zn, Cd, and Pb) contents were determined in 16 stations as well as in 2 industrial and 2 domestic discharge sources, in the central coastal area of the Gulf of Gabes. Compared to the northern and southern areas of the study area, the highest contents of contaminants were reached in the central area which hosts the coastal industrial complex. The seawater in this central area was also found to be acid and of higher temperature. Based on the Water Pollution Index results, an increasing degradation gradient of the seawater quality was revealed from northern and/or southern stations to central ones, categorized as 'strongly to seriously affected'. Phosphogypsum wastes dumped by the Tunisian Chemical Group (GCT) seem to have continuously degraded the seawater quality in the study area. A rapid intervention is needed to stop the effects on the marine environment. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. How Industry 4.0 Changes Business : A Commercial Perspective

    Directory of Open Access Journals (Sweden)

    Ayşe Göksu Özüdoğru

    2018-05-01

    Full Text Available Industry is the part of an economy that manufacture components and goods which are highly automatized. This paper presents a general understanding about the Fourth Industry Revolution- Industry 4.0 approach from a commercial point of view. Firstly, the history of Industrial Revolution is explained and the roadmap to Industry 4.0 is shown. Industry components and the main understanding of Industry 4.0 is explained through the previous studies. Secondly, the most common usage, implementation areas and the challenging points are demonstrated. Commercial and industrial application examples of Industry 4.0 in different sectors and the possible implementation areas are defined based on countries and sectors. Finally, the commercial impacts of this new business model is given from the industrial and human perspectives.

  7. Investigations of biofilms in the sewerage system of a highly contaminated industrial and mining area for the localization of heavy metal sources. Final report

    International Nuclear Information System (INIS)

    Cichos, C.; Singliar, U.

    1993-02-01

    The high heavy metal loading of the river Freiberger Mulde is largely caused by contaminations arising from the drainage area of the town of Freiberg. The diffuse input from the dewatering surface likely makes an important contribution to this pollution. The elimination of the reasons for the pollutant input into the sewerage and, thus, for the extremely high contamination of the sewage sludges requires a localization of sources and transport ways. For this purpose the method of investigation of biofilms on the sewer surface can be applied as a reliable method. For the industrial and mining area of Freiberg besides the different branches of industry especially the secondary emissions from deposits of old mining and metallurgical plants as well as from the extremely loaded surface of soil play an important role. The investigation of sewerage biofilms in the area considered have shown that the input of nickel and tin into the sewer is mainly caused by industry. Sources of zinc and copper above all are domestic wastewaters, whereas lead is originated from the surface run-off. Especially high pollutions of arsen and cadmium were found obviously arising from mining and production scraps. The results obtained should be the basis of activities for definite interruption of the pollutant input into the sewer system. They are a contribution to the restoration of the hydrographical network of Mulde/Elbe. (orig.) [de

  8. Mapping of spatial and temporal variations of' water quality in an industrial area: a remote sensing and GIS approach

    International Nuclear Information System (INIS)

    Lakshmi, T.V.; Reddy, M.A.; Anjaneyulu, Y.

    2005-01-01

    This paper illustrate the impact of industrialization on water quality in and around Nakkavagu Watershed, due to unplanted industrial development. The study area falls between 78 deg. 05' - 78 deg. 25'E. longitude and 17 deg. 25'-17 deg. 45'N latitude, the catchment area extends 734 sq. km in Medak district, Andhra Predesh, India. The study area lies in the Godavari Basin. Remote sensing and GIS techniques are used to map the spatial and temporal distribution of water quality with respect to land use / land cover (Lu /Lc) changes for a period of three decades. Spatial database consisting of drainage network and geomorphology and land use / land cover change detection maps (1970-2004) have been generated for the entire watershed using remote sensing satellite data. Attribute database consisting of (water quality analysis is carried out and corresponding water quality index is calculated on a five point scale: 0- 25 Excellent, 26 -50 Good, 51 -75 Poor, 76 -100 Very poor, and> 100 Unfit for Drinking. Integrated study to establish the impact of Lu / Lc on water quality is carried out using GIS Analysis. Maps showing Lu / Lc changes and corresponding spatial distribution of water quality index were generated for the years 1979, 1989,2004. The results indicate that the water quality index in the entire Nakkavagu watershed during 1979 is excellent and good and by 2004, the entire watershed is rated in to poor, very poor and unfit for drinking. Best environmental management plans were suggested for restoration of the Nakkavagu watershed. (author)

  9. Industrial applications and metallurgy

    International Nuclear Information System (INIS)

    Torres M, N.; Melendrez C, G.; Morales, F.L.

    1989-01-01

    From 1961 the use of nuclear energy in the industrial field in Colombia has a big advance. Today nuclear isotopes are used by private companies in this kind of application the Area of Industrial Applications and Metallurgy was the institution section that has trained and has transferred the technology needed for this purpose

  10. Assessment Study on Sensors and Automation in the Industries of the Future. Reports on Industrial Controls, Information Processing, Automation, and Robotics

    Energy Technology Data Exchange (ETDEWEB)

    Bennett, Bonnie [Adventium Labs; Boddy, Mark [Adventium Labs; Doyle, Frank [Univ. of California, Santa Barbara, CA (United States); Jamshidi, Mo [Univ. of New Mexico, Albuquerque, NM (United States); Ogunnaike, Tunde [Univ. of Delaware, Newark, DE (United States)

    2004-11-01

    This report presents the results of an expert study to identify research opportunities for Sensors & Automation, a sub-program of the U.S. Department of Energy (DOE) Industrial Technologies Program (ITP). The research opportunities are prioritized by realizable energy savings. The study encompasses the technology areas of industrial controls, information processing, automation, and robotics. These areas have been central areas of focus of many Industries of the Future (IOF) technology roadmaps. This report identifies opportunities for energy savings as a direct result of advances in these areas and also recognizes indirect means of achieving energy savings, such as product quality improvement, productivity improvement, and reduction of recycle.

  11. SPECIFITY OF REDEVELOPMENT OF INEFFICIENTLY USED INDUSTRIAL TERRITORIES

    Directory of Open Access Journals (Sweden)

    KOVALOV V. V.

    2017-05-01

    Full Text Available Raising of problem. In modern conditions of urban construction, the problem arises of searching for land for a new building. However, the most attractive land plots from the investment point of view are often occupied, including the industrial plants placed on them, many of which do not function. Redevelopment of industrial areas will effectively control the development of the urban environment in accordance with the requirements of the time. Purpose of the aricle. Determination of specific features of the formation of lofts as new elements of the urban environment in the redevelopment of inefficienly used industrial areas. Conclusion. When reconstructing urban degraded industrial areas, it is necessary to place residential objects in addition to commercial real estate objects, the expediency of which is confirmed by the world experience of redevelopment of industrial territories.

  12. Trace Analysis of Heavy Metals in Ground Waters of Vijayawada Industrial Area

    Science.gov (United States)

    Tadiboyina, Ravisankar; Ptsrk, Prasada Rao

    2016-01-01

    In recent years, the new environmental problem are arising due to industrial hazard wastage, global climate change, ground water contamination and etc., gives an attention to protect environment.one of the major source of contamination of ground water is improper discharge of industrial effluents these effluents contains so many heavy metals which…

  13. Areas of improvement of tax adjustment of industrial enterprises

    Directory of Open Access Journals (Sweden)

    Abramova Olha

    2016-03-01

    Full Text Available This article summarizes the scientific approaches and practical experience in theoretical and institutional framework of fiscal management industry. The basic problems in the fiscal management system, the tax regulation methods of large taxpayers are shown. Opportunity is grounded to stimulate the enterprises activity in the directions of tax rates differentiation, tax exemptions and tax credit.

  14. A novel assessment of odor sources using instrumental analysis combined with resident monitoring records for an industrial area in Korea

    Science.gov (United States)

    Lee, Hyung-Don; Jeon, Soo-Bin; Choi, Won-Joon; Lee, Sang-Sup; Lee, Min-Ho; Oh, Kwang-Joong

    2013-08-01

    The residents living nearby the Sa-sang industrial area (SSIA) continuously were damaged by odorous pollution since 1990s. We determined the concentrations of reduced sulfur compounds (RSCs) [hydrogen sulfide (H2S), methyl mercaptan (CH3SH), dimethyl sulfide (DMS), and dimethyl disulfide (DMDS)], nitrogenous compounds (NCs) [ammonia (NH3) and trimethylamine (TMA)], and carbonyl compounds (CCs) [acetaldehyde and butyraldehyde] by instrumental analysis in the SSIA in Busan, Korea from Jun to Nov, 2011. We determined odor intensity (OI) based on the concentrations of the odorants and resident monitoring records (RMR). The mean concentration of H2S was 10-times higher than NCs, CCs and the other RSC. The contribution from RSCs to the OI was over 50% at all sites excluding the A-5 (chemical production) site. In particular, A-4 (food production) site showed more than 8-times higher the sum of odor activity value (SOAV) than the other sites. This suggested that the A-4 site was the most malodorous area in the SSIA. From the RMR analysis, the annoyance degree (OI ≥ 2) was 51.9% in the industrial area. The 'Rotten' smell arising from the RSCs showed the highest frequency (25.3%) while 'Burned' and 'Other' were more frequent than 'Rotten' in the residential area. The correlation between odor index calculated by instrumental analysis and OI from the RMR was analyzed. The Pearson correlation coefficient (r) of the SOAV was the highest at 0.720 (P food production causes significant annoyance in the SSIA. We also confirm RMR data can be used effectively to evaluate the characteristic of odorants emitted from the SSIA.

  15. Impact of agricultural and industrial activities on ground water quality in Kasur area

    International Nuclear Information System (INIS)

    Tasneem, M.A.; Latif, Z.; Butt, S.; Afzal, M.; Ali, M.; Afzal, M.; Khan, I.H.; Sajjad, M.I.

    1999-01-01

    This paper focuses on the impact of agricultural and industrial activities on groundwater quality. Kasur area was selected to study the influence of chemical fertilizers and tannery effluents on groundwater with the help of /sup 15/N of water nitrates. Bremner and keeney methods with certain modifications ware adopted for extraction of nitrate nitrogen in the form of ammonium ions. Ammonium concentrates were converted to nitrogen gas using potassium hypo bromide solution and analyzed on GD-150 mass spectrometer. /sup 15/N of nitrates from groundwater (n=14), pond water and Kisan urea were determined. There is a pronounced difference in the /sup 15/N values of nitrates from various sources. /sup 15/N of pond water (mixture of tannery effluents, sewerage and rainwater) was found to be +31.99% and +21.26% for the first and the second samplings respectively. /sup 15/N of Kisan urea sample was determined to be - 1.00%. The nitrate concentration of groundwater ranged from 1-171 ppm and / sup 15/N was found to be -0.40 to WHO permissible limits (45 ppm). Temporal variation was also observed but the values were still above the WHO limits. It is concluded that the major source of nitrates pollution in the Kasur area is due to chemical fertilizers and +37.10%. Out of 14 drinking water samples six have nitrate contents above biological wastes but not due to the tannery effluents. (author)

  16. Variation of solubility, biokinetics and dose coefficient of industrial uranium oxides according to the specific surface area

    International Nuclear Information System (INIS)

    Chazel, V.; Houpert, P.; Ansorbolo, E.; Henge-Napoli, M.H.; Paquet, F.

    2000-01-01

    The in vitro solubility, absorption to blood, lung retention and dose coefficient of industrial UO 2 samples were studied as a function of the specific surface area (SSA) of the particles. An in vitro study has been carried out on two samples of industrial UO 4 to compare the results with those obtained with UO 2 . Ten UO 2 samples supplied by different fuel factories or research laboratories, presented specific surface areas from 1.00 to 4.45 m 2 .g -1 . The wide range of values of SSA was due to the different conditions of fabrication. Dissolution tests in cell culture medium made on these ten samples have shown that the solubility increased 2.5-fold when the SSA increased 1.7-fold. The same tendency has been found for UO 4 , a soluble compound, and for U 3 O 8 , a moderately soluble compound. Four in vivo experiments carried out on rats by intratracheal instillation of dust suspensions of UO 2 , have highlighted the decrease in lung retention and the increase of absorption to blood with the SSA. The experimental absorption parameters calculated from the in vivo data allowed specific dose coefficients to be obtained which decreased from 6.6 to 4.3 μSv.Bq -1 when the SSA increased from 1.60 to 3.08 m 2 .g -1 . Thus, the medical monitoring of workers at the workplace has to take into account any change in the fabrication process of the uranium compound which can affect the physiochemical properties and consequently the dose coefficient. (author)

  17. CNEN-NN 6.04 standard adaptation in Brazil for industrial radiographic work in occupied areas or public roads

    International Nuclear Information System (INIS)

    Teixeira, P.B.; Aquino, J.O. de; Souza, L.A. de

    1996-01-01

    The industrial radiographic work that uses mobile equipment in Brazil must be in compliance with the National Commission of Nuclear Energy (CNEN) Regulation CNEN-NN 6.04. It states that every works that employs radiographic equipment in occupied areas or public roads requires a specific radiation protection procedure. This procedure must be approved by the CNEN at least fifteen days before starting the job. It is not always possible to the users to get their licensing work at time, because the industrial radiography jobs need immediate actions. Furthermore, the CNEN-NN 6.04 Regulation does not specify what type of information the procedures should involve, so that some important information had been often missed, causing a delaying in the licensing procedures. The corrective and preventive actions taken by the CNEN to optimize this kind of jobs and to overcome bureaucratic difficulties are described. A standard radiation protection procedure is also presented. (authors). 2 refs., 2 tabs

  18. Industrial applications of computer tomography

    International Nuclear Information System (INIS)

    Sheng Kanglong; Qiang Yujun; Yang Fujia

    1992-01-01

    Industrial computer tomography (CT) and its application is a rapidly developing field of high technology. CT systems have been playing important roles in nondestructive testing (NDT) of products and equipment for a number of industries. Recently, the technique has advanced into the area of industrial process control, bringing even greater benefit to mankind. The basic principles and typical structure of an industrial CT system Descriptions are given of some successful CT systems for either NDT application or process control purposes

  19. [Thinking on development of Shanxi Astragali Radix industry].

    Science.gov (United States)

    Qin, Xue-Mei; Li, Ai-Ping; Li, Ke; Li, An-Ping; Ning, Lu-Hong

    2016-12-01

    Shanxi, a traditional production area to produce genuine Astragali Radix of high quality, has experienced major changes in the pattern of resources. This area once accounted for half of Astragali Radix industry, but now only serves as the largest supply area of traditional wild Astragali Radix. Furthermore, the strategic position of Shanxi Astragali Radix industry will become more prominent and more important to economic and social development in face of the diversity of market demands, especially for the strong demands of high-end Astragali Radix. In addition, Astragalus industry involves the simultaneous development of the first, second and tertiary industries in many areas, and it is typical and representative in the traditional Chinese medicine industry development. However, the application and industrial development of Shanxi Astragali Radix have been restricted due to the problems such as blind promotion of transplanting cultivation technology, and lack of science and technology including efficacy investigation, safety evaluation, standardization and controllability studies. Therefore, we would analyze the production history, resource structure, the current situation and progress of industry development, scientific research foundation and existing problem in this paper, and put forward countermeasures for development and technical innovation in order to make Astragali Radix industry bigger and stronger through innovation-driven and make benefits for demos. This thought provides a reference for the exploratory development of other large varieties of Chinese medicinal materials. Copyright© by the Chinese Pharmaceutical Association.

  20. Assessment of industry needs for oil shale research and development. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hackworth, J.H.

    1987-05-01

    Thirty-one industry people were contacted to provide input on oil shale in three subject areas. The first area of discussion dealt with industry`s view of the shape of the future oil shale industry; the technology, the costs, the participants, the resources used, etc. It assessed the types and scale of the technologies that will form the industry, and how the US resource will be used. The second subject examined oil shale R&D needs and priorities and potential new areas of research. The third area of discussion sought industry comments on what they felt should be the role of the DOE (and in a larger sense the US government) in fostering activities that will lead to a future commercial US oil shale shale industry.

  1. The lignite industry and regional development. Interactions exemplified by the Rhenish mining area

    International Nuclear Information System (INIS)

    Kulik, Lars; Voigt, Jens

    2013-01-01

    Even in times of globalised markets, the German lignite industry retains its local and regional roots. Viewed against this background, the relationship between lignite industry and regional actors, and the interactions between the two play a major role in the perspectives for this branch of Germany's energy sector. Today, the links between the lignite industry and regional bodies are those of a partnership at eye-level. This type of relationship between the industry and regional actors has led to new forms and methods of cooperation at various levels. This is particularly evident in the efforts to re-shape the regional structure, develop the structure of townships and strengthen the economic structure with lignite playing an important role and new partners which are gaining in importance. (orig.)

  2. Industry Platforms and New Industrial Policy in Russia

    Directory of Open Access Journals (Sweden)

    Svetlana V. Orekhova

    2017-12-01

    Full Text Available The article aims at clarifying Russian industrial policy as a result of business models changing and market reconstruction. The research bass on the hypothesis that the choice of the industrial policy administrative measures depends on the object of management. It is important to link government regulation of markets with corporate strategies. We reveal that modern economic systems based on using of electronic technologies, big data, and innovative activity. Technological platforms as the single organizational and economic mechanisms affect economic systems very much. We study the content and main characteristics of a business model, is called the "technological platform". We also identify the main required changes in industrial policy. We analyze the matching between scientific and technological scenarios of the Russian economic development and the technological platform. There are two areas of the new industrial policy. They are: a multi-sectoral approach to regulating and improving the quality of the national institutional environment. The industrial and cluster management approaches are inefficient in modern conditions. There is a need for each platform of its technological development scenario. We also clarify the role of the state in the functioning of technological platforms.

  3. Industrial melanism

    Energy Technology Data Exchange (ETDEWEB)

    Ford, E B

    1969-01-01

    Certain species of Lepidoptera have undergone a mutation in pigment color from white to black in order to be more concealing when in soot discolored environments in polluted industrial areas in England. In less polluted areas the original white variety continues to prosper. The two forms result from alleles of a color-controlling gene. The black variety is inconspicuous to insects when it settles on trees and rocks which are covered with soot.

  4. Regulatory and legal aspects in industrial mining industries

    International Nuclear Information System (INIS)

    Magalhaes, Maisa Haiidamus

    2016-01-01

    The regulation between the Brazilian Nuclear Energy Commission - CNEN performance and the mineral industries that produces NORM is presented. Besides the legal aspects, some comments from the point of view of the supervisory and licensing body about their performance in the radiation protection area are pointed out

  5. REGIONALIZATION AND INTRA-INDUSTRY TRADE. AN ANALYSIS OF AUTOMOBILE INDUSTRY TRADE IN NAFTA

    OpenAIRE

    Sylvie MONTOUT; Jean-Louis MUCCHIELLI; Soledad ZIGNAGO

    2002-01-01

    As was shown in some previous studies, the creation of the North American Free Trade American (NAFTA) has significantly increased trade and investment flows between member countries. Consequently, it seems appropriate to analyze the incidences of the free trade agreement on the nature of trade. In this paper, we study the intra-industry trade in the automobile industry within the NAFTA area. Our results highlight an increase in intra-industry trade since the beginning of the 1990s. The import...

  6. Structural alteration of industry of region as pre-condition of steady development of national economy (on the example of the Dnepropetrovsk area

    Directory of Open Access Journals (Sweden)

    V. E. Vlasiuk

    2014-02-01

    Full Text Available An economic analysis is conducted in the production sphere of the Dnepropetrovsk area in a period development and in the process of transformation production to the sector of the national economic system. In particular, an analysis of the actual state of socio ­economic development of the Dnipropetrovsk region in the late XX century and its current state in order to find trends change attributes of manifestation and impact on living standards . The analysis of individual industries Dnipropetrovsk region. It is shown that the basis of the regional industry ­ metallurgy. Comparative analysis of the sectoral structure of industrial production Dnipropetrovsk Oblast major types of products that characterize its economy in 1997 and 2012. This analysis revealed the changes in the structural transformation of the regional industry . The basic indicators of socio­ economic development of the Dnipropetrovsk region. In particular , it was found that the dynamics of socio ­economic development of the region by major figures exceeded the average values in Ukraine , and the main results of 2011 was a steady growth in key sectors of the Dnipropetrovsk region. Were clarified problems of the region’s economy and its future prospects . The factors of forming of regional economic policy and principles of structural alteration of industry are considered.

  7. Forested wetland area and distribution: A forest and paper industry policy

    International Nuclear Information System (INIS)

    Dubensky, M.M.; Berg, R.S.; Berry, W.S.

    1993-01-01

    The policy statement from the 1988 National Wetlands Policy Forum included the amorphous and ambiguous phase no overall net loss of the nation's remaining wetlands base. To industry and thousands of non-industrial landowners, timber production represents a major function of wetlands. The authors cover historical aspects of wetlands protection, the controversial and politicized issue of wetlands delineation, proposed revisions to the wetlands criteria, regulatory issues related to the US Corp of Engineers and EPA, and compensatory mitigation. A package of economic incentives, education, and favorable tax treatment to encourage landowners to maintain their forested wetlands is suggested. 5 refs

  8. Forest Products Industry of the Future

    Energy Technology Data Exchange (ETDEWEB)

    Los Alamos Technical Associates, Inc

    2002-05-01

    Los Alamos Technical Associates, Inc (LATA) conducted an evaluation of the potential impact and value of a portion of the current portfolio of r&d projects supported by the Office of Industrial Technology and the Forest Products Industry of the Future. The mission of the evaluation was to (a) assess the potential impact of the projects to meet the critical goals of the industry as identified in the vision and roadmapping documents. (b) Evaluate the relationship between the current portfolio of projects and the Agenda 202 Implementation Plan. In addition, evaluate the relationship between the portfolio and the newly revised draft technology strategy being created by the industry. (c) Identify areas where current efforts are making significant progress towards meeting industry goals and identify areas where additional work my be required to meet these goals. (d) Make recommendations to the DOE and the Forest Products Industry on possible improvements in the portfolio and in the current methodology that DOE uses to assess potential impacts on its R&D activities.

  9. Hydrogen: a new resource for the Venice industrial area

    International Nuclear Information System (INIS)

    Giorgio Mattiello

    2006-01-01

    Hydrogen Park is based in Marghera, inside the Venice Municipality, where it is produced the 40% of the Italian production of hydrogen, as by-product of industrial processes. This availability gives the possibility to develop and to test new technologies based on hydrogen without the gas generation constrain. The Company deal is to coordinate the partners activities to utilize the Hydrogen resources available in Marghera. (authors)

  10. Assessment of knowledge and awareness of global warming among inhabitants of industrial areas of an urban community in Nigeria

    Directory of Open Access Journals (Sweden)

    Ruth Ochanya Adio-Moses

    2016-03-01

    Full Text Available Global warming with its attendant consequences such as extreme heat, natural disasters, poor air quality and allergens has increased health problems. The risk of injury, illness and resulting death among inhabitants are expected to be frequent and intense especially in areas with heavy industrial presence. The current low level of literacy and the socio-economic situation of Nigerians could be responsible for their low consciousness of this unpreventable changes in our climate in one hand and lack of willingness on the part of people to seek environmental health and safety information on the causes, effect and how to mitigate global warming on the other hand. This study focuses on assessment of knowledge and awareness of causes, effects and mitigating measures of global warming among inhabitants of industrial areas of Ibadan southwestern Nigeria. In this descriptive survey, purposive sampling technique was used to select 200 respondents from among the inhabitants of this area. A questionnaire with reliability co-efficient (r of 0.78 was used for data collection. Two research questions were answered and three hypotheses tested at 0.05 level of significance. Statistical methods such as Chi-square, frequency count, simple percentage and pie chart were used for data analysis. Results showed that only 20% had 34.0% had negative attitude while 81 (40.5% were indifferent, all the three hypotheses were rejected. Consequently, it was deduced that respondents have significant knowledge of global warming. In recommendation, people’s environmental health seeking behaviour should be promoted through multidisciplinary and interdisciplinary research and the development of inclusive environmental health and safety intervention strategies.

  11. Dynamic of pollutants concentration in forest stands from Copsa Mica industrial area

    Directory of Open Access Journals (Sweden)

    Marian Ianculescu

    2009-12-01

    Full Text Available The paper presents the dynamics of pollutants concentrations from nonferrous metallurgical plant in Copsa Mica, considered, between the years 1985 - 1989, as the most polluted area, even in the world, and detected as a large black spot on Landsat satellite imagery. Returning to investigations in this area, after 20-25 years, the pollution activity was changed after 1990, as a consequence of the reduction of industrial capacity, including the black smoke plant decommissioning, and the chimney built for exhaust pollutants over 350 m feet high, resulted some conclusions, necessary for decisions that have to be taken by environmental, forestry, health and agriculture authorities.The litter, soil and vegetation samples were colected from the same permanent sample plots between the years 2006-2009, as between the years 1985-1989, using the same methods, in order to be compared and analyzed. Therefore, returning to investigations in these permanent sample plots, were found the following conclusions: i between the period 1985 - 1989, in all examined cases were revealed high pollutants concentrations, even exceeding the maximum allowable limit (MAL consisting of suphur compounds in synergistic action with heavy metals (Cu, Pb, Cd, Zn, Mn, etc., in vegetation and litter, which was directly correlated with noxious concentrations in the air, and concentrations below MAL in soil samples; ii contrary, regarding the new pollution activity, it has been revealed low noxious concentration, in vegetation, litter and soil samples collected during the period between the years 2006-2008, which are directly related to their low concentration level in the air. Due to pollutants accumulation phenomenon over the years, high pollutants concentrations, ten times higher than MAL, were found in the superior soil layer. In such circumstances the best solution to protect the environment, population and livestock of the damaged area, for tens of thousands of hectares, is the

  12. Industrial impact of particle physics

    International Nuclear Information System (INIS)

    Anon.

    1987-01-01

    Papers represented at the conference in Bristol devoted to the interrelation of high-energy physics and industry are reviewed in short. Most of speakers confirmed that technologies developd for high-energy physics and mastered with companies are quickly widely adopted industry and other areas of science and technology

  13. Academia Meets Industry.

    Science.gov (United States)

    Schäfer, Christian; Paprotka, Tobias; Heitzer, Ellen; Eccleston, Mark; Noe, Johannes; Holdenrieder, Stefan; Diehl, Frank; Thierry, Alain

    2016-01-01

    Researchers working in industrial laboratories as well as in academic laboratories discussed topics related to the use of extracellular nucleic acids in different fields. These included areas like non-invasive prenatal diagnosis, the application of different methods for the analysis and characterization of patients with benign and malignant diseases and technical aspects associated with extracellular nucleic acids. In addition, the possibilities and chances for a cooperation of researchers working in different worlds, i.e. academia and industry, were discussed.

  14. The future of the refining industry; L`avenir de l`industrie du raffinage

    Energy Technology Data Exchange (ETDEWEB)

    Favennec, J P; Guerard, P; Freund, E; Obe, P; O` Brien, D; Montanier, J C

    1996-12-31

    An analysis of the situation and of the future prospects of the refining industry in Europe is given and compared to the other world areas (USA, south-east Asian). Nowadays, the refining industry imposes to take into account of the environmental constraints, of the products qualities and of the refineries emissions. New possible technologies are described. (O.M.) 21 refs.

  15. The future of the refining industry; L`avenir de l`industrie du raffinage

    Energy Technology Data Exchange (ETDEWEB)

    Favennec, J.P.; Guerard, P.; Freund, E.; Obe, P.; O`Brien, D.; Montanier, J.C.

    1995-12-31

    An analysis of the situation and of the future prospects of the refining industry in Europe is given and compared to the other world areas (USA, south-east Asian). Nowadays, the refining industry imposes to take into account of the environmental constraints, of the products qualities and of the refineries emissions. New possible technologies are described. (O.M.) 21 refs.

  16. THE CONCEPT OF SUSTAINABLE DEVELOPMENT THROUGH ECONOMIC GROWTH AND DIVERSIFICATION OF THE LABOUR MARKET IN THE INDUSTRIAL AREAS AFFECTED BY RESTRUCTURING

    Directory of Open Access Journals (Sweden)

    Marius Eremia VLAICU POPA

    2013-06-01

    Full Text Available In the context of what is implemented through dualism "ecosystem-efficient", sustainable development involves the care of the human potential of the present situation and the future of its natural resources, energy, materials and information. As an effect of responsibility for future generations, the efficient use of resources requires, at the same time, the operation of a sustainable economy, by diversification and development of the labour market in order to meet present and future demands of human society. At local and regional level, through the closing of mines and large enterprises, with an effect in restructuring the economic sector and employment, development strategies and rehabilitation of the affected industrial areas as a common principle approach, analyzing the problems, defining the objectives and policies, identifying actions to attack problems and provide for mechanisms that will enable the progress control. In this paper it is presented the concept of sustainable development as imperative for economic growth, diversification and development of the labour market, being dealt the representative criteria and principles of sustainable development strategy of any company. Are defined the components and objectives of a strategy for local and regional development of industrial areas affected by the restructuring.

  17. Proposed industrial recovered materials utilization targets for the metals and metal-products industry

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-05-01

    The introductory chapter provides a discussion of the factors that affect the recovery and reuse of secondary materials and the competition between the primary and secondary metals industries. It discusses these industries in terms of resource characteristics, industry technology, pollution control requirements, market structure, the economics of recycling, and the issues involved in econometrically estimating scrap supply response behavior. It further presents the methodology established by DOE for the metals, textiles, rubber, and pulp and paper industries. The areas in which government policies might have a significant impact on the utilization of primary and secondary metals and on any recycling targets between now and 1987 are noted. Chapter 3 presents general profiles for the major industrial segments comprising SIC 33. The profiles include such topics as industry structure, process technology, materials and recycling flow, and future trends. Chapter 4 specifically covers the evaluation of recycling targets for the ferrous, aluminum, copper, zinc, and lead industries. (MCW)

  18. Self-regulation in the mining industry

    DEFF Research Database (Denmark)

    Sinding, Knud; Peck, Philip

    2013-01-01

    Many industries have established their own systems for self-regulation. They often do so when companies involved in the industry operate in countries where financial, technical, environmental and social regulation is weak and when the industry is challenged by legitimacy issues related to behaviour...... in one of these areas. One industry that has progressed unevenly down the road of self-regulation in these areas is mining. Developing self-regulation for mines and mining companies involves difficult questions of scope, rules, membership, assessment criteria and performance evaluation. While self-regulation...... may bring benefits to members, they are likely to take a long time coming; but when they do arrive they may be substantial. Using a range of theoretical and empirical results from research on self-regulation, performance rating and corporate strategy, this paper analyses the strategic and operational...

  19. Trace elements analysis of crops and vegetables grown around industrial areas of Faisalabad and Gujranwala cities using INAA and AAS

    International Nuclear Information System (INIS)

    Husaini, S.N.; Zaidi, J.H.; Matiullah; Akram, M.; Subhan, K.

    2010-01-01

    Industrial effluents pollution is a source of risk to the health of people living in industrial cities of Pakistan. Most of the untreated effluents are discharged to the nearby agricultural fields that pollutes the vegetation grown in such soil. A majority of the industries are not equipped with suitable recycling and effluent treatment plants. Consequently, toxic metals enter our food chain and results in significant health risks and serious diseases. In order to evaluate the concentration of toxic metals (namely As, Cd, Co, Cr, Cu, Mn, Ni, Pb, Sb and Se), in crops and vegetable samples collected from the irrigated areas of Faisalabad and Gujranwala regions. Neutron activation analysis (NAA) and atomic absorption spectrometric (AAS) techniques have been used. All the observed metal concentrations were higher than the reported literature values. Moreover, the highest values of toxic metals of As (0.44 +- .03 mu g/g) and Co (0.5 +- 0.01 mu g/g), Mn (45.3 +- 2.0 mu g/g) and Sb (0.1 +- 0.01 mu g/g), Se (1.28 +- 0.06 mug/g) and Pb (3.84 +- 0.27 mu g/g) were found in tomato, bitter gourd and rice samples respectively. (author)

  20. Source apportionment of PM(2.5) in the harbour-industrial area of Brindisi (Italy): identification and estimation of the contribution of in-port ship emissions.

    Science.gov (United States)

    Cesari, D; Genga, A; Ielpo, P; Siciliano, M; Mascolo, G; Grasso, F M; Contini, D

    2014-11-01

    Harbours are important for economic and social development of coastal areas but they also represent an anthropogenic source of emissions often located near urban centres and industrial areas. This increases the difficulties in distinguishing the harbour contribution with respect to other sources. The aim of this work is the characterisation of main sources of PM2.5 acting on the Brindisi harbour-industrial area, trying to pinpoint the contribution of in-port ship emissions to primary and secondary PM2.5. Brindisi is an important port-city of the Adriatic Sea considered a hot-spot for anthropogenic environmental pressures at National level. Measurements were performed collecting PM2.5 samples and characterising the concentrations of 23 chemical species (water soluble organic and inorganic carbon; major ions: SO4(2-), NO3(-), NH4(+), Cl(-), C2O4(2-), Na(+), K(+), Mg(2+), Ca(2+); and elements: Ni, Cu, V, Mn, As, Pb, Cr, Sb, Fe, Al, Zn, and Ti). These species represent, on average, 51.4% of PM2.5 and were used for source apportionment via PMF. The contributions of eight sources were estimated: crustal (16.4±0.9% of PM2.5), aged marine (2.6±0.5%), crustal carbonates (7.7±0.3%), ammonium sulphate (27.3±0.8%), biomass burning-fires (11.7±0.7%), traffic (16.4±1.7 %), industrial (0.4±0.3%) and a mixed source oil combustion-industrial including ship emissions in harbour (15.3±1.3%). The PMF did not separate the in-port ship emission contribution from industrial releases. The correlation of estimated contribution with meteorology showed directionality with an increase of oil combustion and sulphate contribution in the harbour direction with respect to the direction of the urban area and an increase of the V/Ni ratio. This allowed for the use of V as marker of primary ship contribution to PM2.5 (2.8%+/-1.1%). The secondary contribution of oil combustion to non-sea-salt-sulphate, nssSO4(2-), was estimated to be 1.3 μg/m(3) (about 40% of total nssSO4(2-) or 11% of PM2

  1. Industrial power distribution

    CERN Document Server

    Fehr, Ralph

    2016-01-01

    In this fully updated version of Industrial Power Distribution, the author addresses key areas of electric power distribution from an end-user perspective for both electrical engineers, as well as students who are training for a career in the electrical power engineering field. Industrial Power Distribution, Second Edition, begins by describing how industrial facilities are supplied from utility sources, which is supported with background information on the components of AC power, voltage drop calculations, and the sizing of conductors and transformers. Important concepts and discussions are featured throughout the book including those for sequence networks, ladder logic, motor application, fault calculations, and transformer connections. The book concludes with an introduction to power quality, how it affects industrial power systems, and an expansion of the concept of power factor, including a distortion term made necessary by the existence of harmonic.

  2. Production of large-area polymer solar cells by industrial silk screen printing, lifetime considerations and lamination with polyethyleneterephthalate

    DEFF Research Database (Denmark)

    Krebs, Frederik C; Alstrup, J.; Spanggaard, H.

    2004-01-01

    The possibility of making large area (100 cm(2)) polymer solar cells based on the conjugated polymer poly 1,4-(2-methoxy-5-ethylhexyloxy)phenylenevinylene (MEH-PPV) was demonstrated. Devices were prepared by etching an electrode pattern on ITO covered polyethyleneterephthalate (PET) substrates....... A pattern of conducting silver epoxy allowing for electrical contacts to the device was silk screen printed and hardened. Subsequently a pattern of MEH-PPV was silk screen printed in registry with the ITO electrode pattern on top of the substrate. Final evaporation of an aluminum electrode or sublimation......). The half-life based on I-sc in air for the devices were 63 h. The cells were laminated in a 125 mum PET encasement. Lamination had a negative effect on the lifetime. We demonstrate the feasibility of industrial production of large area solar cells (1 m(2)) by silk screen printing and envisage...

  3. Industrial refrigeration by absorption/compression; Refrigeracion industrial por absorcion/compresion

    Energy Technology Data Exchange (ETDEWEB)

    Ayala Delgado, Ramon; Heard, Christopher Lionel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1996-12-31

    The use of the absorption/compression refrigeration in the industrial area is analyzed. It is estimated than in Mexico 50% of the food is wasted for lack of refrigeration in the producing centers and by the inefficient distribution system, as well as for the hot climate. The functioning of the absorption refrigeration and the hybrid system absorption/compression which can operate with the two thermodynamic cycles in variable proportions, depending on the specific application, looking for operational advantages and energy efficiency is described. This type of technology could be applied in Mexico due to the lack of industrial refrigeration and to the need of substituting compressors in some companies which have up to 20 years of use [Espanol] Se analiza el uso de la refrigeracion por absorcion/compresion en el area industrial. En Mexico se estima que se desperdicia el 50% de los alimentos por falta de refrigeracion en los centros productores y por el deficiente sistema de distribucion, asi como por el clima calido. Se describe el funcionamiento de la refrigeracion por absorcion y la refrigeracion por absorcion/compresion o sistema hibrido, el cual puede funcionar con los dos tipos de ciclos termodinamicos, en proporciones variables, dependiendo de la aplicacion especifica, buscando ventajas de operacion y eficiencia energetica. Este tipo de tecnologia podria aplicarse en Mexico debido a la falta de refrigeracion industrial y a la necesidad de sustituir compresores en algunas empresas los cuales tienen hasta 20 anos de uso

  4. Industrial refrigeration by absorption/compression; Refrigeracion industrial por absorcion/compresion

    Energy Technology Data Exchange (ETDEWEB)

    Ayala Delgado, Ramon; Heard, Christopher Lionel [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1997-12-31

    The use of the absorption/compression refrigeration in the industrial area is analyzed. It is estimated than in Mexico 50% of the food is wasted for lack of refrigeration in the producing centers and by the inefficient distribution system, as well as for the hot climate. The functioning of the absorption refrigeration and the hybrid system absorption/compression which can operate with the two thermodynamic cycles in variable proportions, depending on the specific application, looking for operational advantages and energy efficiency is described. This type of technology could be applied in Mexico due to the lack of industrial refrigeration and to the need of substituting compressors in some companies which have up to 20 years of use [Espanol] Se analiza el uso de la refrigeracion por absorcion/compresion en el area industrial. En Mexico se estima que se desperdicia el 50% de los alimentos por falta de refrigeracion en los centros productores y por el deficiente sistema de distribucion, asi como por el clima calido. Se describe el funcionamiento de la refrigeracion por absorcion y la refrigeracion por absorcion/compresion o sistema hibrido, el cual puede funcionar con los dos tipos de ciclos termodinamicos, en proporciones variables, dependiendo de la aplicacion especifica, buscando ventajas de operacion y eficiencia energetica. Este tipo de tecnologia podria aplicarse en Mexico debido a la falta de refrigeracion industrial y a la necesidad de sustituir compresores en algunas empresas los cuales tienen hasta 20 anos de uso

  5. An overview of equivalent doses in eye lens of occupational radiation workers in medical, industrial and nuclear areas

    International Nuclear Information System (INIS)

    Lima, A.R.; Silva, F.C.A. da; Hunt, J.G.

    2013-01-01

    Some epidemiological evidences were recently reviewed by the ICRP and it was suggested that, for the eye lens, the absorbed dose threshold for induction of late detriments is about 0.5 Gy. On this basis, on 2011, the ICRP has recommended changes to the occupational dose limit in planned exposure situations, reducing the eye lens dose equivalent limit of 150 mSv to 20 mSv per year, on average, during the period of 5 years, with exposure not exceeding 50 mSv in a single year. Following the ICRP recommendation, the Brazilian Commission of Nuclear Energy (CNEN) adopted immediately the new limit to the eyes lens. This study aimed to show an overview about the doses in eye lens of occupational radiation workers in situations of planned exposures in the medical, industrial and nuclear areas, emphasizing the greatest radiological risks applications. It was observed that there are some limitations, such as example, to use individual monitor calibrated on Hp(3), to assess the equivalent dose in the eye lens. This limitation obstructs some experimental studies and monitoring of the levels of radiation received in the eye lens of radiation workers. Recent studies have showed that the lenses of eyes monitoring of workers, mainly in the planned exposure, must be follow-up. However, such researches were obtained only in medical exposures, mainly in interventional medicine procedures. Studies with planned exposure on nuclear and industrial areas are really needed and will be very important due to the new recommended by ICRP dose limits. (author)

  6. Antitrust issues and the restructuring of the power industry

    International Nuclear Information System (INIS)

    Moritz, T.F.

    1999-01-01

    Because of extensive federal oversight and state regulation of the utility area, few antitrust cases have been brought concerning the electric power industry. The limited prior case law that exists in this area nonetheless provides valuable guidance regarding how the antitrust laws will protect consumers and, therefore, competition in the electric power industry. This article will discuss the primary antitrust doctrines likely to be utilized to protect competition in this industry

  7. Safety of Nanotechnology in Food Industries

    Science.gov (United States)

    Amini, Seyed Mohammad; Gilaki, Marzieh; Karchani, Mohsen

    2014-01-01

    The arrival of nanotechnology in various industries has been so rapid and widespread because of its wide-ranging applications in our daily lives. Nutrition and food service is one of the biggest industries to be affected by nanotechnology in all areas, changing even the nature of food itself. Whether it’s farming, food packaging, or the prevention of microbial contamination the major food industries have seen dramatic changes because of nanotechnology. Different nanomaterials such as nanopowders, nanotubes, nano-fibers, quantum dots, and metal and metal-oxide nanoparticles are globally produced in large quantities due to their broad applicability in food-related industries. Because of the unique properties of nanostructures and nanomaterials – such as a large surface area, high activity, and small size, there is some concern about the potential for harmful adverse effects of used nanomaterials on health or the environment. However, because of tremendous advances in different industries, this concern may be unnecessary. This paper presents some uses of nanomaterials in food and related industries and their possible side-effects. This review covers the various aspects of nanomaterials and their impact on human exposure, safety, and environmental concerns. PMID:25763176

  8. Cultural Identity of the Industrial Heritage in Gdansk

    Science.gov (United States)

    Szymański, Tomasz

    2017-10-01

    Since its inception, urbanized area passes a number of changes, caused by demands of its inhabitants. Industrial heritage, including historic architecture at the brownfields, that’s more and more present in the centres of our cities, is one of the most important components of the identity. The development of civilization causes the phenomenon of spatial and functional transformations. Revitalization of the areas recently occupied by the industry, provides a unique opportunity to rediscover their values. Increasingly, however, it uses the terms “wasteland” or “brownfields”. Land use by industry is associated only with its “predatory” use, destruction, devastation. However, we can venture to say, that the existing industrial use of the land, “civilized” them. Current developments have restored a public access to the “new” urban space. At these areas preserved quite a lot valuable architectural objects. That can be seen, unfortunately, tend to forget the fact of complexity, multithreaded value areas and facilities. Analyzed causes of the risks, ways to prevent adverse transformations, methods of developing action plans to re-create the industrial architecture - are still discussed. Industrial heritage, particularly architecture, is one of the important components of the material culture that specify identity of the city of Gdansk. It provides with no doubt about its distinctiveness and originality in relation to other cities and regions. Revitalization projects are at the same time the most effective way to protect and preserve the cultural identity of the brownfield facilities. Examples of such transformations are most relevant to Gdansk and also beginning to be more and more visible. Areas of the main activities of revitalization in Gdansk, are the area of the former Imperial Shipyard and the Ołowianka Island are still and only the beginning of the necessary changes. Old industrial plants and technical facilities should be subject of the

  9. Pharmacist-industry relationships.

    Science.gov (United States)

    Saavedra, Keene; O'Connor, Bonnie; Fugh-Berman, Adriane

    2017-12-01

    The purpose of this study was to document, in their own words, beliefs and attitudes that American pharmacists have towards the pharmaceutical industry and pharmacists' interactions with industry. An ethnographic-style qualitative study was conducted utilizing open-ended interviews with four hospital pharmacists, two independent pharmacists, two retail pharmacists and one administrative pharmacist in the Washington, DC, metropolitan area to elicit descriptions of and attitudes towards pharmacists' relationships with industry. Analysis of the qualitative material followed established ethnographic conventions of narrative thematic analysis. All pharmacists reported interactions with pharmaceutical company representatives. Most had received free resources or services from industry, including educational courses. Respondents uniformly believed that industry promotional efforts are primarily directed towards physicians. Although respondents felt strongly that drug prices were excessive and that 'me-too' drugs were of limited use, they generally had a neutral-to-positive view of industry-funded adherence/compliance programmes, coupons, vouchers, and copay payment programmes. Interviewees viewed direct-to-consumer advertising negatively, but had a generally positive view of industry-funded drug information. Pharmacists may represent a hitherto under-identified cohort of health professionals who are targeted for industry influence; expanding roles for pharmacists may make them even more attractive targets for future industry attention. Pharmacy schools should ensure that students learn to rely on unbiased information sources and should teach students about conflicts of interest and the risks of interacting with industry. Further research should be conducted on the extent to which pharmacists' attitudes towards their duties and towards drug assessment and recommendation are influenced by the pharmaceutical industry. © 2017 Royal Pharmaceutical Society.

  10. 33 CFR 106.265 - Security measures for restricted areas.

    Science.gov (United States)

    2010-07-01

    ...) Protect stores and industrial supplies from tampering. (b) Designation of restricted areas. The OCS... stores and industrial supplies; and (vii) Areas containing hazardous materials. (c) The OCS facility...

  11. Source apportionment and health risk assessment of potentially toxic elements in road dust from urban industrial areas of Ahvaz megacity, Iran.

    Science.gov (United States)

    Najmeddin, Ali; Keshavarzi, Behnam; Moore, Farid; Lahijanzadeh, Ahmadreza

    2017-10-28

    This study investigates the occurrence and spatial distribution of potentially toxic elements (PTEs) (Hg, Cd, Cu, Mo, Pb, Zn, Ni, Co, Cr, Al, Fe, Mn, V and Sb) in 67 road dust samples collected from urban industrial areas in Ahvaz megacity, southwest of Iran. Geochemical methods, multivariate statistics, geostatistics and health risk assessment model were adopted to study the spatial pollution pattern and to identify the priority pollutants, regions of concern and sources of the studied PTEs. Also, receptor positive matrix factorization model was employed to assess pollution sources. Compared to the local background, the median enrichment factor values revealed the following order: Sb > Pb > Hg > Zn > Cu > V > Fe > Mo > Cd > Mn > Cr ≈ Co ≈ Al ≈ Ni. Statistical results show that a significant difference exists between concentrations of Mo, Cu, Pb, Zn, Fe, Sb, V and Hg in different regions (univariate analysis, Kruskal-Wallis test p matrix factorization model revealed that traffic-related emissions (43.5%) and steel industries (26.4%) were first two sources of PTEs in road dust, followed by natural sources (22.6%) and pipe and oil processing companies (7.5%). The arithmetic mean of pollution load index (PLI) values for high traffic sector (1.92) is greater than industrial (1.80) and residential areas (1.25). Also, the results show that ecological risk values for Hg and Pb in 41.8 and 9% of total dust samples are higher than 80, indicating their considerable or higher potential ecological risk. The health risk assessment model showed that ingestion of dust particles contributed more than 83% of the overall non-carcinogenic risk. For both residential and industrial scenarios, Hg and Pb had the highest risk values, whereas Mo has the lowest value.

  12. Temporal and spatial changes of microbial community in an industrial effluent receiving area in Hangzhou Bay.

    Science.gov (United States)

    Zhang, Yan; Chen, Lujun; Sun, Renhua; Dai, Tianjiao; Tian, Jinping; Zheng, Wei; Wen, Donghui

    2016-06-01

    Anthropogenic activities usually contaminate water environments, and have led to the eutrophication of many estuaries and shifts in microbial communities. In this study, the temporal and spatial changes of the microbial community in an industrial effluent receiving area in Hangzhou Bay were investigated by 454 pyrosequencing. The bacterial community showed higher richness and biodiversity than the archaeal community in all sediments. Proteobacteria dominated in the bacterial communities of all the samples; Marine_Group_I and Methanomicrobia were the two dominant archaeal classes in the effluent receiving area. PCoA and AMOVA revealed strong seasonal but minor spatial changes in both bacterial and archaeal communities in the sediments. The seasonal changes of the bacterial community were less significant than those of the archaeal community, which mainly consisted of fluctuations in abundance of a large proportion of longstanding species rather than the appearance and disappearance of major archaeal species. Temperature was found to positively correlate with the dominant bacteria, Betaproteobacteria, and negatively correlate with the dominant archaea, Marine_Group_I; and might be the primary driving force for the seasonal variation of the microbial community. Copyright © 2016. Published by Elsevier B.V.

  13. The Effects of Leachate on Groundwater in Ota Industrial Area ...

    African Journals Online (AJOL)

    Compositions of landfill leachate and groundwater pollution were studied at industrial sites landfill, which are located at Ota, Nigeria. The leachate was sampled at 5 different locations at the landfill, and at 15 and 20 m downstream of the landfill. Groundwater samples were collected from 10 different sources to study the ...

  14. Entrepreneurship in Creative Industries

    Directory of Open Access Journals (Sweden)

    Jūratė Černevičiūtė

    2011-10-01

    Full Text Available Creative industries topic is closely related to the art markets in a variety of mediation forms. Traditional business entrepreneurship is risk-related activities implementing innovations in markets, and generating economic growth. The creative industry area has plenty of innovation, but its acceptance is more complex because of the cultural world’s participants’ agreements. Cultural world has its own social organization, associated with the mediation (including entrepreneurship types. The article examines the concept of entrepreneurship in the traditional business and creative industries and types of innovation and mediation (including entrepreneurship. The conclusion is that types of intermediary in creative industries depend on the cultural world’s social organization, and forms of mediation are more heterogeneous than in the traditional business. 

  15. Global warming and the insurance industry

    Science.gov (United States)

    Berz, G. A.

    1992-06-01

    In the last few decades, the international insurance industry has been confronted with a drastic increase in the scope and frequency of great natural disasters. The trend is primarily attributable to the continuing steady growth of the world population and the increasing concentration of people and economic values in urban areas. An additional factor is the global migration of populations and industries into areas like the coastal regions which are particularly exposed to natural hazards. The natural hazards themselves, on the other hand, have not yet shown any significant increase. In addition to the problems the insurance industry has with regard to pricing, capacity and loss reserves, the assessment of insured liabilities, preventive planning and the proper adjustment of catastrophe losses are gaining importance. The present problems will be dramatically aggravated if the greenhouse predictions come true. The increased intensity of all convective processes in the atmosphere will force up the frequency and severity of tropical cyclones, tornados, hailstorms, floods and storm surges in many parts of the world with serious consequences for all types of property insurance. Rates will have to be raised and in certain coastal areas insurance coverage will only be available after considerable restrictions have been imposed, e.g., significant deductibles and/or liability or loss limits. In areas of high insurance density the loss potential of individual catastrophes can reach a level where the national and international insurance industries run into serious capacity problems. Recent disasters showed the disproportionately high participation of reinsurers in extreme disaster losses and the need for more risk transparency if the insurance industry is to fulfill its obligations in an increasingly hostile environment.

  16. Road to excellence through industry self-management

    International Nuclear Information System (INIS)

    Miller, J.H. Jr.

    1985-01-01

    In March 1984, nuclear utilities in the US took the initiative to make regulations in management and people-related areas unnecessary, as such regulations would interfere with our ability to manage ourselves. Such an initiative is the Nuclear Utility Management and Human Resources Committee (NUMARC), which was formed because the authors believe the electric utility industry is best capable of managing itself. NUMARC works with the US Nuclear Regulatory Commission (NRC) and its staff to develop a new approach to improving management and people-related areas of nuclear plant operation. In a recent NRC policy statement on training and qualification, the NRC recognized that the industry, through the initiatives of NUMARC and the Institute of Nuclear Power Operations (INPO), has made progress in developing programs to improve nuclear utility training and personnel qualification. It also recognized the importance of the industry's initiative and encouraged further self-improvement. The NRC stated it will refrain from new rulemaking in the area of training for a minimum of 2 yr, while monitoring industry efforts

  17. Industrial gases

    International Nuclear Information System (INIS)

    Hunter, D.; Jackson, D.; Coeyman, M.

    1993-01-01

    Industrial gas companies have fought hard to boost sales and hold margins in the tough economic climate, and investments are well down from their 1989-'91 peak. But 'our industry is still very strong long term' says Alain Joly, CEO of industry leader L'Air Liquide (AL). By 1994, if a European and Japanese recovery follows through on one in the U.S., 'we could see major [investment] commitments starting again,' he says. 'Noncryogenic production technology is lowering the cost of gas-making possible new applications, oxygen is getting plenty of attention in the environmental area, and hydrogen also fits into the environmental thrust,' says Bob Lovett, executive v.p./gases and equipment with Air Products ampersand Chemicals (AP). Through the 1990's, 'Industrial gases could grow even faster than in the past decade,' he says. Virtually a new generation of new gases applications should become reality by the mid-1990s, says John Campbell, of industry consultants J.R. Campbell ampersand Associates (Lexington, MA). Big new oxygen volumes will be required for powder coal injection in blast furnaces-boosting a steel mill's requirement as much as 40% and coal gasification/combined cycle (CGCC). Increased oil refinery hydroprocessing needs promise hydrogen requirements

  18. Energy Dispersive X-Ray Fluorescent Analysis of Soil in the Vicinity of Industrial Areas and Heavy Metal Pollution Assessment

    Science.gov (United States)

    Singh, V.; Joshi, G. C.; Bisht, D.

    2017-05-01

    The soil of two agricultural sites near an industrial area was investigated for heavy metal pollution using energy dispersive X-ray fluorescence (EDXRF). The concentration values for 17 elements were determined in the soil samples including eight heavy metal elements, i.e., Fe, Ni, As, Pb, Mn, Cr, Cu, and Zn. The soil near a pulp and paper mill was found to be highly polluted by the heavy metals. The concentration data obtained by EDXRF were further examined by calculating the pollution index and Nemerow integrated pollution index.

  19. Nanotechnology impact on the automotive industry.

    Science.gov (United States)

    Wong, Kaufui V; Paddon, Patrick A

    2014-01-01

    Nanotechnology has been implemented widely in the automotive industry. This technology is particularly useful in coatings, fabrics, structural materials, fluids, lubricants, tires, and preliminary applications in smart glass/windows and video display systems. A special sub-class of improved materials, alternative energy, has also seen a boost from advances in nanotechnology, and continues to be an active research area. A correlation exists in the automotive industry between the areas with increased nanotechnology incorporation and those with increased profit margins via improvements and customer demands.

  20. Lead Polluted Hotspot: Environmental Implication of Unplanned Industrial Development

    Directory of Open Access Journals (Sweden)

    Rikta Sharmin Yousuf

    2016-06-01

    Full Text Available In Rayer Bazaar, different industries like tannery, plastic, textile, battery recycling industry etc. are increasing rapidly without considering the environmental issues and deterioration. Since chromium (Cr pollution of this area has been widely investigated due to the presence of tannery industries, this study was focused on examining other environmental factors. Field visits and analytical results of semi-quantitative and quantitative analysis as well as three dimensional excitation emission matrix spectroscopy (3DEEM of water, soil and vegetative tissues indicated that, the area is highly polluted in term of different environmental parameters and metal content. The extremely high lead (Pb content of the soil (1171.7 mg/kg in summer, 2157.1 mg/kg in winter and blackish materials of vegetative tissues (6585.6 mg/kg in summer, 1974.1 mg/kg in winter indicates excessive lead deposition of this area that makes it a lead polluted hotspot. One of the possible sources of the extremely high lead concentration is adjacent battery recycling industry and/or other industries surrounding this area. So it is urgent to take necessary steps to find out immediate options for possible mitigation.

  1. 7 CFR 2902.49 - Industrial cleaners.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Industrial cleaners. 2902.49 Section 2902.49... Items § 2902.49 Industrial cleaners. (a) Definition. Products used to remove contaminants, such as..., floors, walls, and other production-related work areas. The cleaning products within this item are...

  2. The distribution characteristics of trace elements in airborne particulates from an urban industrial complex area of Korea using instrumental neutron activation analysis

    International Nuclear Information System (INIS)

    Lim, Jong Myoung; Lee, Jin Hong; Chung, Yong Sam

    2005-01-01

    An instrumental neutron activation analysis was used to measure the concentrations of about 24 elements associated with airborne particulates (PM10) that were collected in the most polluted urban region of Daejeon city, Korea from 2000 to 2002. Using the measurement data for various elements, both the extent of elemental pollution in the study area and the seasonality in their distribution characteristics were examined. Examinations of their distribution patterns indicated that most elements with crustal origin tend to exhibit seasonal peaks during spring, while most elements with anthropogenic origin tend to exhibit seasonal peaks during fall or winter. In order to explain the factors regulating their mobilization properties, the data were processed by a factor analysis. Results of the factor analysis suggested competing roles of both industrial and natural source processes, despite that the study site is located at a downwind position of the industrial complex. Based on the overall results of this study, it is concluded that the site may be strongly impacted by man-made sources but the general patterns of elemental distributions in the study area inspected over a seasonal scale are quite consistent with those typically observed from natural environment

  3. Energy efficient industrialized housing research program

    Energy Technology Data Exchange (ETDEWEB)

    Berg, R.; Brown, G.Z.; Finrow, J.; Kellett, R.; McDonald, M.; McGinn, B.; Ryan, P.; Sekiguchi, Tomoko (Oregon Univ., Eugene, OR (USA). Center for Housing Innovation); Chandra, S.; Elshennawy, A.K.; Fairey, P.; Harrison, J.; Mazwell, L.; Roland, J.; Swart, W. (Florida Solar Energy Center, Cape Canaveral, FL (USA))

    1989-12-01

    This document describes the research work completed in five areas in fiscal year 1989. (1) The analysis of the US industrialized housing industry includes statistics, definitions, a case study, and a code analysis. (2) The assessment of foreign technology reviews the current status of design, manufacturing, marketing, and installation of industrialized housing primarily in Sweden and Japan. (3) Assessment of industrialization applications reviews housing production by climate zone, has a cost and energy comparison of Swedish and US housing, and discusses future manufacturing processes and emerging components. (4) The state of computer use in the industry is described and a prototype design tool is discussed. (5) Side by side testing of industrialized housing systems is discussed.

  4. A Feasibility Study on Hydrate-Based Technology for Transporting CO2 from Industrial to Agricultural Areas

    Directory of Open Access Journals (Sweden)

    Seiji Matsuo

    2017-05-01

    Full Text Available Climate change caused by global warming has become a serious issue in recent years. The main purpose of this study was to evaluate the effectiveness of the above system to quantitatively supply CO2 or CO2 hydrate from industrial to agricultural areas. In this analysis, several transportation methods, namely, truck, hydrate tank lorry, and pipeline, were considered. According to this analysis, the total CO2 supply costs including transportation ranged from 15 to 25 yen/kg-CO2 when the transportation distance was 50 km or less. The cost of the hydrate-based method increased with the transport distance in contrast to the liquefied CO2 approach. However, the technology of supplying CO2 hydrate had merit by using a local cooling technique for cooling specific parts of agricultural products.

  5. City of Richland 300 Area industrial wastewater permit application

    International Nuclear Information System (INIS)

    1995-05-01

    Battelle-Pacific Northwest Labs and Westinghouse Hanford Co. are responsible for operating most of the facilities within the 300 Area; other contractors are also involved. The document gives briefly water/wastewater data: water sources, water usage, water discharge/loss, NPDES permit status, plant sewer outlets size and flow, etc. The document also includes the following attachments: 300 Area building list, Oct. 1993-Oct. 1994 300 Area water balance, waste shipments for CY 1994, complete chemical listing, sanitary sewer sampling results (12/19/94, 1/18/95, 1/15/95), and priority pollutant listings

  6. Residents' Self-Reported Health Effects and Annoyance in Relation to Air Pollution Exposure in an Industrial Area in Eastern-Estonia.

    Science.gov (United States)

    Orru, Hans; Idavain, Jane; Pindus, Mihkel; Orru, Kati; Kesanurm, Kaisa; Lang, Aavo; Tomasova, Jelena

    2018-02-02

    Eastern Estonia has large oil shale mines and industrial facilities mainly focused on electricity generation from oil shale and shale oil extraction, which produce high air pollution emissions. The "Study of the health impact of the oil shale sector-SOHOS" was aimed at identifying the impacts on residents' health and annoyance due to the industrial processing. First, a population-wide survey about health effects and annoyance was carried out. Second, the total and oil shale sectors' emitted concentrations of benzene, phenol, and PM 2.5 were modelled. Third, the differences between groups were tested and relationships between health effects and environmental pollution studied using multiple regression analysis. Compared to the control groups from non-industrial areas in Tartu or Lääne-Viru, residents of Ida-Viru more frequently ( p sector. Next to direct health effects, up to a quarter of the residents of Ida-Viru County were highly annoyed about air pollution. Perceived health risk from air pollution increased the odds of being annoyed. Annoyed people in Ida-Viru had significantly higher odds of experiencing respiratory symptoms during the last 12 months, e.g., wheezing (2.30, 1.31-4.04), chest tightness (2.88, 1.91-4.33 or attack of coughing (1.99, 1.34-2.95).

  7. Terpuruknya Industri Mebel Rotan Cirebon

    Directory of Open Access Journals (Sweden)

    Oktavianus Marti Nangoy

    2011-04-01

    Full Text Available Cirebon area has long been known as an area that has great potential in the field of furniture and handicraft industry with raw materials of rattan. This region really does not have trees but because of the large rattan hereditary craftsmen at work there, and many there menyebabkan Cirebon rattan industry as a major regional craftsmen and the largest cane producer in Indonesia. But that condition did not last long because it feared since the Minister of Trade Decree No.12 of 2005, contains the opening tap on raw rattan exports, leading, manufacturers prefer to export the raw materials of rattan. Prices of raw materials for furniture and rattan craft also be high because the prices charged for local producers to use the benchmark export price. This ministerial decree on the one side benefit exporters but the industry shut down one side. 

  8. growth pattern and the industrial development of the lagos region, nigeria

    Directory of Open Access Journals (Sweden)

    Dickson Dare Ajayi

    2013-07-01

    Full Text Available This paper examines the nature, growth and spatial pattern of industries within the Lagos Region. Industrial activities in this region grew progressively over the year from mere brickwork, palm oil mills, printing press, soap factory, and metal container factory to capital intensive manufacturing. Indeed, the number of industrial establishments increased from 122 in 1962 to 637 in 1993. Lagos developed into Nigeria's leading industrial center; especially following the expansion in its service and administrative sectors. Whereas, chemicals and pharmaceutical; and basic metal, iron and steel and fabricated metal products industry groups dominate in industrial scene, wood and wood products (including furniture; and non-metallic mineral products are rare. The spatial pattern shows that industrial establishments vary amongst the industrial estates/areas, and also among the industry groups. Ikeja/Ogballsheri industrial estate/area dominates the industrial scene.

  9. Physics in Industry: A Case Study

    Science.gov (United States)

    Pratt-Ferguson, Ben

    2007-10-01

    Often ignored and sometimes even considered ``black sheep'' by the university & government-lab physicists, many industrial physicists continue making valuable scientific contributions in diverse areas, from computer science to aero and thermo-dynamics, communications, mathematics, engineering, and simulation, to name a few. This talk will focus on what industrial physicists do, what preparations are beneficial to obtaining a first industrial job, and what the business environment is like for physicists. The case study will be that of the author, starting with undergraduate and graduate studies and continuing on to jobs in industry.

  10. Industrial environmental practices in Polish Firms

    DEFF Research Database (Denmark)

    Kræmer, Trine Pipi

    , and environment. The five case firms all had a Communist past. The firms represent three different industrial sectors; i.e. textile, energy, and publishing and printing industries. Furthermore, the firms are both private and state owned as well as in the process of privatisation.......The study investigates how discursive developments in Poland interact with industrial environmental practices in five production firms. The analysis of the discursive development covers the period from the end of World War I to the turn of the century. The areas in focus are identity, industry...

  11. Integrated Approach as a Means of Leading the Degraded Post-Industrial Areas Out of Crisis - A Case Study of Lodz

    Science.gov (United States)

    Cysek-Pawlak, Monika; Krzysztofik, Sylwia

    2017-10-01

    The article analyses the issue of modern development strategies in post-industrial areas. The issue concerns many regions in Europe and is one of the fundamental challenges of urban policy. The aim of the study is to define the methods of achieving lasting changes in the quality of life in the degenerated areas of post-industrial cities. If projects in the spatial, cultural, economic and social sphere are carried out simultaneously, they produce long-term effects. Projects in the spatial, cultural, economic and social sphere carried out simultaneously produce long-term effects. In this context, projects improving the accessibility of the area, making use of its cultural heritage, which naturally includes architectural elements that create the identity of the city, as well as activities aimed at an economic recovery, are absolutely vital. Another key element is changing the city image, both in the eyes of the residents as well as outsiders. The study analyses approaches adopted by the urban policy of Lodz, a city which has received the largest EU funding for urban renewal in Poland. The article presents new legal mechanisms introduced by the Urban Renewal Act to the Polish legal system. The redevelopment of the city’s transport network, renovation of historic urban tissue, improving civil engineering infrastructure and quality of public spaces are all part of the projects implemented in Lodz. Moreover, a proposal to locate a cultural event of international importance in the heart of the city centre has been put forward. Lodz as the only European city applied to organize EXPO 2022. The exhibition area is located in the immediate vicinity of the newly built multimodal railway station, the biggest railway investment in the country in the recent years. These projects will improve city image, enhance economic recovery and raise the quality of life in the city centre. A consistent implementation of the development strategy, despite the centralization of projects in the

  12. RAINWATER RETENTION ON THE HEAVILY INDUSTRIALIZED AREAS

    Directory of Open Access Journals (Sweden)

    Bartosz Kaźmierczak

    2016-06-01

    Full Text Available The paper presents the dimensioning of retention reservoirs indicator method regarding to the German DWA-A 117 guideline, recommended for small rainfall catchments (with an area of 200 ha. A comparative calculation of the retention reservoirs overflow useful volume were conducted for 4 variants of catchment development (degree sealing surface varied from 60% to 90%, under the assumed sewage outflow from the tank at the level of the urban basin natural runoff. At given conditions required unit volume of retention reservoirs, from 145.4 m3 to 206.7 m3 for each 1 ha of catchment area were determined. The obtained results confirmed the fact that useful volume of the tanks were decreased, when Blaszczyk’s pattern reliable rainwater streams were used for calculations. Because the DWA-A 117 guideline method should be applied to a small rainfall catchments, it is recommended to verify the hydraulic capacity of dimensioned channels and objects using hydrodynamic simulations at different load of rainfall catchment scenarios, variable in time and space.

  13. Petroleum industry assists hurricane relief

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    This paper reports that the petroleum industry is aiding victims of last month's Hurricane Andrew with cash, clothing, food, water, and other supplies. Cash contributions announced as of last week totaled more than $2.7 million for distribution in South Florida and South Louisiana. Petroleum industry employees were collecting relief items such as bottled water and diapers for distribution in those areas

  14. Industrial hygiene survey. IMC, Agricultural Operation Division, Bartow, Florida

    International Nuclear Information System (INIS)

    Stephenson, F.; Cassady, M.

    1977-10-01

    An industrial hygiene survey was conducted at the Agricultural Operations Division, IMC, Bartow, Florida, on July 19-22, 1976, as part of the industry-wide study of the phosphate fertilizer industry. The phosphate ore mining operations, the plant, and the medical, safety, and industrial hygiene programs are described. The beneficiation plant was surveyed to determine the 8-hour time weighted averages of cadmium, chromium, vanadium, fluoride, arsenic, and silica. General area samples were taken for uranium and alpha-radiation. With the exception of uranium in the grinding area, all other elements analyzed came within the OSHA standards. However, several results exceed the NIOSH recommended standard

  15. Industrial applications of radiation technology

    International Nuclear Information System (INIS)

    Sabharwal, Sunil

    2005-01-01

    In recent years, radiation processing has emerged as an alternative to conventional technologies such as thermal and chemical processing for many industrial applications. The industry is expanding at a fast rate all over the world. The actual industrial benefits on commercial basis, however, depends on the need of the individual society and may vary from country to country. In India, the applications of radiation technology have been found in areas of health care, agriculture, food preservation, industry and environment. Both gamma radiation and electron beam accelerators are being utilized for this purpose. Presently, 6 commercial gamma irradiators housing about 1.5 million curie 60 Co and an annual turnover of over US$ 2 million and 3 commercial electron beam (EB) accelerators with installed capacity of 185 kW are commercially operating in India. The new areas being explored include use of electron beam irradiation for surface treatment, radiation processed membranes for a variety of applications and radiation processing of natural polymers. In the present paper, the current status of this program, especially the recent developments and future direction of radiation processing technology is reviewed. (author)

  16. Statistics of gas industry in France for 1995; Statistiques de l`industrie gaziere en France pour l`annee 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-31

    Here are the summary about the data related to natural gas industry in France for 1995. Resources, production, transport, distribution are given. Tables of consumption by industrial area are detailed. The different transports or storages are shown. (N.C.).

  17. Locating industrial VOC sources with aircraft observations

    International Nuclear Information System (INIS)

    Toscano, P.; Gioli, B.; Dugheri, S.; Salvini, A.; Matese, A.; Bonacchi, A.; Zaldei, A.; Cupelli, V.; Miglietta, F.

    2011-01-01

    Observation and characterization of environmental pollution, focussing on Volatile Organic Compounds (VOCs), in a high-risk industrial area, are particularly important in order to provide indications on a safe level of exposure, indicate eventual priorities and advise on policy interventions. The aim of this study is to use the Solid Phase Micro Extraction (SPME) method to measure VOCs, directly coupled with atmospheric measurements taken on a small aircraft environmental platform, to evaluate and locate the presence of VOC emission sources in the Marghera industrial area. Lab analysis of collected SPME fibres and subsequent analysis of mass spectrum and chromatograms in Scan Mode allowed the detection of a wide range of VOCs. The combination of this information during the monitoring campaign allowed a model (Gaussian Plume) to be implemented that estimates the localization of emission sources on the ground. - Highlights: → Flight plan aimed at sampling industrial area at various altitudes and locations. → SPME sampling strategy was based on plume detection by means of CO 2 . → Concentrations obtained were lower than the limit values or below the detection limit. → Scan mode highlighted presence of γ-butyrolactone (GBL) compound. → Gaussian dispersion modelling was used to estimate GBL source location and strength. - An integrated strategy based on atmospheric aircraft observations and dispersion modelling was developed, aimed at estimating spatial location and strength of VOC point source emissions in industrial areas.

  18. PENGELOLAAN LINGKUNGAN INDUSTRI BERBASIS EKO-EFISIENSI DI KAWASAN SIMONGAN KOTA SEMARANG (An Ecological–Efficiency-based for Industrial Management in Simongan Areas, Semarang City

    Directory of Open Access Journals (Sweden)

    Zaenuri Zaenuri

    2011-03-01

    Full Text Available ABSTRAK Penelitian ini bertujuan nntuk menganalisis bentuk-bentuk eko-efisiensi, serta keterkaitannya dengan pengelolaan lingkungan. Data yang diperoleh dianalisis secara deskriptif-komparatif. Hasil penelitian menunjukkan, bentuk eko-efisiensi yang dilakukan industri galvanis adalah recycle air limbah yang dihasilkan. Industri galvanis PMDN telah berhasil mendaur-ulang seluruh air limbah yang dihasilkan, sedangkan industri galvanis PMA berhasil mendaur-ulang sebanyak 1.742,2 m 3 atau 46,2 % air limbah yang dihasilkan pada tahun 2004 hingga mencapai 83,4% pada tahun 2008. Di samping itu, industri galvanis PMA telah berhasil mengelola limbah yang bernilai ekonomis, yakni zinc ash dan zinc dross selama kurun waktu 2006-2008, senilai Rp 3.488.910.000,00. Industri farmasi melakukan eko-efisiensi melalui program penghematan air, pemanfaatan kertas bekas untuk amplop gaji pegawai (reuse, penggunaan e-mail, dan pengelolaan barang bekas/limbah nonB3. Pemakaian air awal sebelum program penghematan rata-rata perbulan ± 10.000 m 3 (tahun 2000. Pemakaian air setelah program penghematan rata-rata perbulan ± 4.250 m 3 (tahun 2008 atau turun 57,5 %. Rata-rata penggunaan e-mail perbulan ± 2.500 email per bulan. Rata-rata penjualan barang bekas/ limbah nonB3 yang masih bernilai ekonomis (karton, plastik bekas, dll ± Rp 5.750.000,00 perbulan. Industri furniture menghasilkan limbah yang bernilai ekonomis, seperti serpihan kayu, serbuk gergaji, dan sisa potongan kayu. Setiap hari rata-rata dihasilkan 30 m 3 serpihan kayu, 12 m 3 serbuk gergaji, dan 7 m 3 sisa potongan kayu. Di samping itu, dihasilkan sisa karton dan gabus rata-rata 2 m 3 per hari. Industri tekstil pemintalan menghasilkan limbah kapas dan benang, serta limbah bekas packing kapas dan serat, masing-masing 40 ton dan 10 colt perbulan, dengan nilai Rp 220.000.000,00. Dengan melakukan eko-efisiensi perusahaan telah melakukan pengelolaan lingkungan (aspek ekologi untuk meraih efisiensi penggunaan

  19. Offshore wind industry capabilities in the UK

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-07-01

    This report summarises the results of a questionnaire survey distributed to companies and organisations interested in opportunities in offshore wind energy industries that may results in the improved competitiveness of the industry. The potential areas of advantage for the UK offshore industry are examined including resource and design conditions, turbine design and manufacture, electrical systems, operation and maintenance, project management and finance. Networking and communications are considered.

  20. Industrial applications at GANIL

    International Nuclear Information System (INIS)

    Delagrange, H.

    1993-01-01

    After a first round of industrial applications using heavy ion beams, GANIL has refocused these activities along the lines defined by a strategy and market study. Heavy ion industrial applications take their roots in the physical effects of the interactions occurring between heavy ion projectiles and matter. Specific equipments operated by GANIL or CIRIL allow users to take benefit from these effects. By heavy ion irradiation, industrial companies qualify radiation hardened electronic components and sensitize plastic films to produce 'nuclear track' membranes. Research and development programs with laboratories of the public sector, focus on heavy ion lithography dedicated to large area luminescent flat screens with field emitter microtips and on tribology with radioactive implanted ions. Even sometimes facing difficulties to fill the gap between industry and research, GANIL is eager to promote heavy ion beam technologies. (author) 36 refs., 6 figs., 5 tabs

  1. Assessment of land allotment support power industry in Grati, Pasuruan Regency

    Science.gov (United States)

    Muzaqqi, M. A. R.

    2017-06-01

    The industrial sector is always in need of land for factory as well as other supporting facilities, on the other side of the ability of the environment (support) the uneven terrain of every area in favor of intensive activities such as industry. Land uses that are not adapted to the support power, will cause pollution, damage, disaster and loss that generally uses the environment. The purpose of this research was to assess the resources support neighborhood Grati district associated with the existence of a plan to build an industrial area in accordance with the direction of Grati utilization of space in the spatial plan of the Pasuruan Regency area. In this study of land carrying capacity power comparison capability and land use. The Analysis technique used is the technique of overlay with analysis tools namely software using the software Arcgis 10.1. The parameters of the ability of land-adapted to the characteristics of the land for industry, namely the slope the slope ranges 0-25% on the slope of 25-45% can be developed with industry improvement area contours, and on a slope above 45% not allocated as an industrial area, the type of soil that is not easy slopes, the intensity of the rain of less than 3000 mm, potential landslide and flood-prone lowlands. Each parameter will be provided scoring between 1-5. Score of 1 was given to the condition of land the most harm, and a score of 5 is given for the condition of the land which supports most of the location industry. The result scoring is divided in 5 clases those are bad (5-9), is bad (9.1-13), medium (13.1), good (17,1-9) and good (21.1-25). The need for industrial land, calculated from the vast land of existing industries. Based on research results, obtained the ability to land on the area of research has 3 classes of 5 classes, i.e. good, moderate and bad. The results of the comparison between the broad capabilities and the needs of the farm industry, it can be concluded that the power of the land to support

  2. Education Industry

    Science.gov (United States)

    2007-01-01

    themes: No Child Left Behind Act reauthorization, international competitiveness, and recruiting and retention of quality teachers. The US education ...industry stakeholders and require difficult choices. A more centralized education system has many advantages , and the US should move in that direction...between math and science skills, innovation and creativity, and international education , as all these areas are integral to future success. Finally

  3. Environmental problems in Russian coal industry

    International Nuclear Information System (INIS)

    Kharchenko, V.; Oumnov, V.

    1996-01-01

    The state of the Russian coal industry is complicated both economically and environmentally. Most mines are unprofitable. Several coal mines are intended to be closed. So, under existing conditions, coal mines are unable to give much attention to environmental protection problems. At the same time, coal mining is one of the most polluting industries. The main trends in this industry's negative influence upon the environment are: land spoilage and immobilization to lay out open-pit mines and mineral waste dump areas and tailing piles as well as with industrial waste water runoff; atmospheric pollution with the air coming from underground and substances blown off from dumps, hydrogeological regime intervention in coal mining areas, etc. One way to solve environmental problems in coal mining is a more rational utilization of the accompanying natural coal resources. Such measures make it possible to obtain complementary profits not only at the expense of reducing environmental destruction but producing new kinds of goods or services as well. Examples of similar solutions are solid mineral wastes utilization, underground space utilization, coal gas utilization and other issues

  4. Implementation of a remote system for monitoring of radiological areas of radiological areas

    International Nuclear Information System (INIS)

    Velazquez E, Walter; Galuppo G, Emiliano; Gutierrez G, Jorge; Reyes R, Jerson

    2008-01-01

    Full text: Introduction: The present work shows the development of a radiation remote monitoring system which control radiological areas in the principal facilities at CCHEN and the development in the last years to use this system called SMARR (Remote Radiological Area Monitoring System). This is an important issue in radiological safety is to know 'on line' and in a 'continuously way' the radiological variables of areas, especially if in these areas people manage radioactive sources or material, the monitoring system are operative on La Reina and Lo Aguirre Nuclear Centers. This 'knowledge' gets a good support to the radiological safety to safeguard the environment and people in the facilities. Nuclear Chilean Commission: Actually, this system is daily operating to register the background radiation and level operation, for example of the facilities research reactor, cyclone, irradiators, in order to probe the behaviors under operational requirements. The system was made using common Geiger Muller and NaI detectors. This signal is received, data by data, for a collector computer which uses a Labview program to do this displayed on a screen computer using graphics to show the activity on a radiological area, and when the lectures pass a setting value automatically the system send by e-mail and text message which also can be received for cell phones enabled for this for the supervisor. Each monitored facility is completely independent of each other and store a data backup, also every installation are monitoring with server computer, it's concentrating the information and allow to view it on line in real time, trough the intranet and internet network. In addition, the information is stored in the special report in the server and available for to do a statistics and identify the operation periods, and control of radioactive sources. The Industry: The radiological protection on industry is necessary today, the typical instrumentation on the industry is growing up in the

  5. Competency Standards for Bachelor of Industrial Technology Graduates for the Construction Industry in Region IV-A: Inputs For Curriculum Enhancement

    Directory of Open Access Journals (Sweden)

    George P. Compasivo

    2015-12-01

    Full Text Available The main objective of this study was to develop competency standards for Industrial Technology graduates for employment in the construction industry in Region IV-A, Philippines. It specifically identified the basic and core competency standards for industrial technology and determined the degree of importance of competencies needed in the construction industry sector. The study identified 28 common competencies for three areas of specializations in industrial technology namely: electrical, civil and drafting technology. There were 39 core competencies for electrical, 31 for drafting and 38 items for civil technology. A total of 50 panel of experts were carefully selected using the purposive sampling as respondents in the study. Experts are selected based on their technical know-how or proficiency and currently practicing their line of profession in the construction industry. The study used the descriptive-developmental method of research. The Delphi technique was applied to determine if the competency under investigation reached the general agreement of opinions by the panel of experts involved. The findings implied that the newly developed competency standards were good input for curriculum enhancement in the area of civil, drafting and electrical technology. The study recommended the newly developed competencies may be followed by the faculty in the course they teach and the new competency items suggested by the panel of experts for inclusion in the curriculum for the three areas of specializations may be considered during the curriculum revision.

  6. Distance collaborations with industry

    Energy Technology Data Exchange (ETDEWEB)

    Peskin, A.; Swyler, K.

    1998-06-01

    The college industry relationship has been identified as a key policy issue in Engineering Education. Collaborations between academic institutions and the industrial sector have a long history and a bright future. For Engineering and Engineering Technology programs in particular, industry has played a crucial role in many areas including advisement, financial support, and practical training of both faculty and students. Among the most important and intimate interactions are collaborative projects and formal cooperative education arrangements. Most recently, such collaborations have taken on a new dimension, as advances in technology have made possible meaningful technical collaboration at a distance. There are several obvious technology areas that have contributed significantly to this trend. Foremost is the ubiquitous presence of the Internet. Perhaps almost as important are advances in computer based imaging. Because visual images offer a compelling user experience, it affords greater knowledge transfer efficiency than other modes of delivery. Furthermore, the quality of the image appears to have a strongly correlated effect on insight. A good visualization facility offers both a means for communication and a shared information space for the subjects, which are among the essential features of both peer collaboration and distance learning.

  7. ENVIRONMENT DEGRADATION BASIS FOR INDUSTRIAL SYSTEMS RENGINEERING

    Directory of Open Access Journals (Sweden)

    Rade Milićević

    2007-06-01

    Full Text Available Presently, the most environmental pressure in Serbia comes from urban areas and associated industries,with collection, treatment and disposal all kinds of hazardous waste, non hazardous waste, and waste water being among the most challenging issues.There is an urgency to prevent further environmental degradation and to initiate new environmental and industrial management practices. Industrial systems reingeneering is one of possible solutions, from the authors stand point.

  8. Consumption of homegrown products does not increase dietary intake of arsenic, cadmium, lead, and mercury by young children living in an industrialized area of Germany

    International Nuclear Information System (INIS)

    Wilhelm, Michael; Wittsiepe, Juergen; Schrey, Petra; Hilbig, Annett; Kersting, Mathilde

    2005-01-01

    The dietary intake of arsenic (As), cadmium (Cd), mercury (Hg), and lead (Pb) was studied among young German children with different food consumption behaviour (consumption of own grown foodstuffs and of products from the supermarket). The study area comprised an industrialized and a rural area of West Germany. Dietary intake of contaminants was measured by the duplicate method according to the WHO guideline. A total 588 duplicate portions were collected daily from 84 individuals between May and September 1998. Intake of food groups was calculated from dietary records. Determination of As, Cd, Hg, and Pb was performed following high-pressure digestion of lyophilized samples by atomic absorption spectrometry (AAS). Geometric mean weekly intake [μg/(kg bw .week)] was as follows: As 1.4, Cd 2.3, Hg 0.16, and Pb 5.3. Geometric mean intake corresponded to the percentage of the provisional tolerable weekly intake (PTWI) as follows: As 9.7%, Cd 32%, Hg 3.3%, Pb 21%. As and Hg intake were mainly influenced by fish consumption. The amount of cereals and bakery wares mainly determined the Cd and Pb intake. Children living in the industrialized area with a substantial food consumption of own grown vegetables or products from domestic animals products had no increased dietary intake of the metals

  9. Entwicklungslinien der estnischen Industrie

    Directory of Open Access Journals (Sweden)

    Matti Raudjärv

    2013-01-01

    Full Text Available The problems related to industry are topical because there is no real industrial policy in Estonia today. The aim of this article is to provide an overview of the stages of development of Estonian industry in different periods (…–1858, ……, 2010–…. Estonian industry has been predominantly concentrated to Tallinn and its immediate vicinity and to other cities and towns of North Estonia, to a lesser extent also to other larger Estonian cities and county centres and their immediate vicinity. Disposition of industry in Estonia has been predominantly related to appropriate geographical conditions and existence of local natural resources and raw materials, traditions and experience but has also depended on decisions on economic policy in different periods, both on the national and local government levels. After regaining of independence there have been no particular fundamental positive changes in regional industrial development in Estonia, we can rather even talk about regression instead for some places. These are, however, necessary in order to ensure jobs to people in all inhabited regions, above all in rural areas. It would also contribute to a balanced regional development in Estonia.

  10. Hyperaccumulators of mercury in the industrial area of a PVC factory in Vlora (Albania

    Directory of Open Access Journals (Sweden)

    Shehu Julian

    2014-01-01

    Full Text Available Contamination by heavy metals is one of the major threats to soil and water as well as human health. Much attention is being paid to metal-accumulating plants that may be used for the phytoremediation of contaminated soils. Some plants can accumulate remarkable levels of metals, 100-1000-fold the levels normally accumulated in most species. This study evaluated the potential of mercury accumulation of 17 plant species growing on contaminated sites in the ex-industrial area of the PVC Factory, Vlora, Albania. Plant roots, shoots and soil samples were collected and analyzed for the selected metal concentration values. The biological accumulation coefficient (BAC was calculated to evaluate the potential use of plant species for phytoremediation purposes. The concentration of Hg in soils inside the contaminated area varied from 45-301 mg/kg-1. The concentration of Hg in plant shoots and roots varied from 0.1 to 12.9 mg/kg-1 and 0.1 to 4.2 mg/kg-1, respectively. Species Medicago sativa L. and Dittrichia viscosa (L. W. Greuter were found to be the most suitable plants for phytoremediation of the site contaminated with mercury (BAC values varied from 30-10 percent, respectively. Considering the BAC values, none of the plant species was found to be a hyperaccumulator; however, plants with high BCF (metal concentration ratio of plant root to soil and low BTC (metal concentration ratio of plant shoots to roots have the potential for phytostabilization and phytoextraction. The results of this study can be used for the management and decontamination of soils with mercury using plant species having phytoremediation potential/characteristics.

  11. Inclusive business model in tapioca starch industry in Lake Toba area: a case study

    Science.gov (United States)

    Tampubolon, S.; Manik, Y.

    2018-04-01

    The notion of inclusive business calls for additional focus and innovation in the way companies do business which seeks to contribute to poverty alleviation by including Bottom of the Pyramids (BoP) communities within its value chain while not losing sight of the ultimate goal of business. Lake Toba Area has potentials in providing chances for doing businesses. On the other hand, the growth of market size is rather slow and demographically still dominated by BoP. This is a case study which seeks to investigate to what extent the Inclusive Business Model (IBM) is adopted in the strategic planning and applied in the operational management of companies that operate in Lake Toba Area. The study was conducted in qualitative basis. The observation was conducted by gathering data and information through a series of interviews with the top management and desk study of the business plan in a tapioca starch industry in Toba Samosir Regency. The collected data and information were then analyzed qualitatively by comparing them with criteria and parameters of IBM suggested in a vast body of literature. The reference by which the IBM is referred in this study is a series of criteria which is synthesized from a literature review on a vast body of literature about IBM. From data analysis, it is evident that IBM has been incorporated in the strategic plan and applied in the operational activities of the object of this study. However, we also found some rooms for improvement such as expanding the involvement of BoP in their value chain as consumers, by which some innovation in the product diversification is required.

  12. Corrosion in power industry

    International Nuclear Information System (INIS)

    Ventakeshwarlu, K.S.

    1979-01-01

    A brief account of the problem areas encountered as a result of corrosion in the electrical power industry including nuclear power industry is given and some of the measures contemplated and/or implemented to control corrosion are outlined. The corrosion problems in the steam generators and cladding tubes of the nuclear power plant have an added dimension of radioactivation which leads to contamination and radiation field. Importance of monitoring water quality and controlling water chemistry by addition of chemicals is emphasised. (M.G.B.)

  13. Research and chemical industry in 90's

    International Nuclear Information System (INIS)

    Trapasso, I.

    1992-01-01

    This paper examines the importance of research with respect to changes taking place within the chemical industry. Specific areas having a significant impact on the future evolution of the industry are identified. The chemical industry is highly R ampersand D intensive with respect to its overall sales volume, as well as, to R ampersand D levels in other industries; and R ampersand D has been a dominant factor influencing the restructuring, on a global scale, of this industry. In the 90's, the industry is expected to have a supply model which is based on the production of marketable high-technology products and integrated systems, developed through coordinated research in multi-disciplinary scientific fields. The optimum strategic and organizational strategies which are to be adopted by the industry during this decade are discussed with reference to the directions being taken by a large multi-national firm in developing strategies in various areas, e.g., new prime materials, environmental protection, pharmacology, and biotechnology. A look is given at recent developments in the sector of advanced polymers, with attention given to processes involving polymer genetics, new products with a wide range of applications and those offering a high level of environmental compatibility. A review of new materials development includes an assessment of prospects for biodegradable plastics based on natural carbohydrates

  14. A comparative study of noise pollution levels in some selected areas in Ilorin Metropolis, Nigeria.

    Science.gov (United States)

    Oyedepo, Olayinka S; Saadu, Abdullahi A

    2009-11-01

    The noise pollution is a major problem for the quality of life in urban areas. This study was conducted to compare the noise pollution levels at busy roads/road junctions, passengers loading parks, commercial, industrial and residential areas in Ilorin metropolis. A total number of 47-locations were selected within the metropolis. Statistical analysis shows significant difference (P noise pollution levels between industrial areas and low density residential areas, industrial areas and high density areas, industrial areas and passengers loading parks, industrial areas and commercial areas, busy roads/road junctions and low density areas, passengers loading parks and commercial areas and commercial areas and low density areas. There is no significant difference (P > 0.05) in noise pollution levels between industrial areas and busy roads/road junctions, busy roads/road junctions and high density areas, busy roads/road junctions and passengers loading parks, busy roads/road junctions and commercial areas, passengers loading parks and high density areas, passengers loading parks and commercial areas and commercial areas and high density areas. The results show that Industrial areas have the highest noise pollution levels (110.2 dB(A)) followed by busy roads/Road junctions (91.5 dB(A)), Passengers loading parks (87.8 dB(A)) and Commercial areas (84.4 dB(A)). The noise pollution levels in Ilorin metropolis exceeded the recommended level by WHO at 34 of 47 measuring points. It can be concluded that the city is environmentally noise polluted and road traffic and industrial machineries are the major sources of it. Noting the noise emission standards, technical control measures, planning and promoting the citizens awareness about the high noise risk may help to relieve the noise problem in the metropolis.

  15. \tFactors Influencing Growth of Cottage Industry in Punjab, Pakistan: Cottage Industry Owners’ Perspective

    Directory of Open Access Journals (Sweden)

    Syed Hussain Haider

    2015-12-01

    Full Text Available In this paper the author has tried to highlight the factors, which determine growth of cottage industry in province of the Punjab. A questionnaire has been developed to check the significance of different variables that have already been examined in different prior studies on the matter in different countries. The respondents were owners of cottage industries selected randomly, from rural and urban areas of the Punjab. The findings of the study will help the government of Pakistan to take necessary actions to protect cottage industry of Pakistan. The study will also help the owners of cottage industry to identify the factors, they must focus to promote their business. Thus, the research findings have its implications in twofold; primarily for the policy makers to help the cottage industry for its survival and growth and secondly for the owners of cottage industry to stress only on the most relevant factors. On the basis of data collected it has been observed that five variables have significant impact over the growth of cottage industry of Pakistan.

  16. Oil and Gas Industry In Qatar

    International Nuclear Information System (INIS)

    1992-12-01

    In less than two decades, numerous impressive developments have taken place. These include: the realization of full ownership and complete control by the State over oil and gas operations and related industries, the establishment of Qatar General Petroleum Corporation (QGPC), the development of exploration and production activities, the full utilization of natural gas in industry and domestic sectors and the construction of down stream industries in the industrial area (Umm Said) including the refinery, the natural gas liquids plants and the fertilizer and petrochemical complexes. Such important achievements have been crowned with the development of the North Field massive reserves of non associated gas. 4 figs

  17. 1991 worldwide natural gas industry directory

    International Nuclear Information System (INIS)

    Anon.

    1991-01-01

    This book provides information for the natural gas industry, just as other PennWell directories have for the petroleum industry. Comprehensive in scope, each company listing includes address, phone, fax telex and cable numbers, key personnel, subsidiaries, branches and brief descriptions. The directory is organized in major areas of operation and includes sections on: Distribution, Drilling/Exploration/Production, Gas Utilities, Gathering/Transmission, Industry Associations/Organizations, LNG, LPG, Marketing, Processing, Regulatory Agencies, and Service, Supply and Manufacturers. An invaluable reference source for the natural gas professional

  18. Adaptation of Regulatory Systems in Schoolchildren, Residing in Industrial Area

    Directory of Open Access Journals (Sweden)

    Aiman E. Konkabaeva

    2013-01-01

    Full Text Available The article presents the results of the study of heart rate variability (HRT in apparently healthy volunteers of both sexes without bad habits, aged 16-18, residing in industrial region (Temirtau and the ones, studying under innovative technologies. HRT was registered with the help of computer-controlled devices “Varikard” (Russia. The changes of HRT spectral indexes towards integral impact of vegetative regulation mechanisms and parasympathetic activity decrease and regulatory systems overexertion, demanding correction methods implementation

  19. Modelling of PM10 concentration for industrialized area in Malaysia: A case study in Shah Alam

    Science.gov (United States)

    N, Norazian Mohamed; Abdullah, M. M. A.; Tan, Cheng-yau; Ramli, N. A.; Yahaya, A. S.; Fitri, N. F. M. Y.

    In Malaysia, the predominant air pollutants are suspended particulate matter (SPM) and nitrogen dioxide (NO2). This research is on PM10 as they may trigger harm to human health as well as environment. Six distributions, namely Weibull, log-normal, gamma, Rayleigh, Gumbel and Frechet were chosen to model the PM10 observations at the chosen industrial area i.e. Shah Alam. One-year period hourly average data for 2006 and 2007 were used for this research. For parameters estimation, method of maximum likelihood estimation (MLE) was selected. Four performance indicators that are mean absolute error (MAE), root mean squared error (RMSE), coefficient of determination (R2) and prediction accuracy (PA), were applied to determine the goodness-of-fit criteria of the distributions. The best distribution that fits with the PM10 observations in Shah Alamwas found to be log-normal distribution. The probabilities of the exceedences concentration were calculated and the return period for the coming year was predicted from the cumulative density function (cdf) obtained from the best-fit distributions. For the 2006 data, Shah Alam was predicted to exceed 150 μg/m3 for 5.9 days in 2007 with a return period of one occurrence per 62 days. For 2007, the studied area does not exceed the MAAQG of 150 μg/m3

  20. Statistics of gas industry in France for 1995

    International Nuclear Information System (INIS)

    1995-01-01

    Here are the summary about the data related to natural gas industry in France for 1995. Resources, production, transport, distribution are given. Tables of consumption by industrial area are detailed. The different transports or storages are shown. (N.C.)

  1. Electrical industry and the eighties - triumph or disaster

    Energy Technology Data Exchange (ETDEWEB)

    1979-11-16

    A brief review of progress made in the electrical industry during the 1880s is presented. Then the trials and tribulations which are in store for the industry in 1980 are reviewed. How these problems should be tackled by a strong and unified industry is suggested. Areas covered include the anti-nuclear movement, the energy supply problems, rampant consumerism, and the consumer lobby.

  2. Radiological characterisation and radon equilibrium factor in the outdoor air of a post-industrial urban area

    International Nuclear Information System (INIS)

    Rozas, S.; Idoeta, R.; Alegría, N.; Herranz, M.

    2016-01-01

    of determining activity concentrations for each naturally occurring radionuclide and the equilibrium factor in the outdoor air. - Highlights: • A yearlong full radiological picture of a post-industrial area's air is shown. • The method considers isotopes collection, ingrowth and decay during sampling. • The method is based on early and delayed gamma measurements after sampling. • Past industries' committed impact on the air radiological quality is assessed. • Influence of environmental parameters on equilibrium factor is analysed.

  3. Seismic changes industry

    International Nuclear Information System (INIS)

    Taylor, G.

    1992-01-01

    This paper discusses the growth in the seismic industry as a result of the recent increases in the foreign market. With the decline of communism and the opening of Latin America to exploration, seismic teams have moved out into these areas in support of the oil and gas industry. The paper goes on to discuss the improved technology available for seismic resolution and the subsequent use of computers to field-proof the data while the seismic team is still on-site. It also discusses the effects of new computer technology on reducing the amount of support staff that is required to both conduct and interpret seismic information

  4. Energy Conservation Projects to Benefit the Railroad Industry

    Energy Technology Data Exchange (ETDEWEB)

    Clifford Mirman; Promod Vohra

    2009-12-31

    The Energy Conservation Projects to benefit the railroad industry using the Norfolk Southern Company as a model for the railroad industry has five unique tasks which are in areas of importance within the rail industry, and specifically in the area of energy conservation. The NIU Engineering and Technology research team looked at five significant areas in which research and development work can provide unique solutions to the railroad industry in energy the conservation. (1) Alternate Fuels - An examination of various blends of bio-based diesel fuels for the railroad industry, using Norfolk Southern as a model for the industry. The team determined that bio-diesel fuel is a suitable alternative to using straight diesel fuel, however, the cost and availability across the country varies to a great extent. (2) Utilization of fuel cells for locomotive power systems - While the application of the fuel cell has been successfully demonstrated in the passenger car, this is a very advanced topic for the railroad industry. There are many safety and power issues that the research team examined. (3) Thermal and emission reduction for current large scale diesel engines - The current locomotive system generates large amount of heat through engine cooling and heat dissipation when the traction motors are used to decelerate the train. The research team evaluated thermal management systems to efficiently deal with large thermal loads developed by the operating engines. (4) Use of Composite and Exotic Replacement Materials - Research team redesigned various components using new materials, coatings, and processes to provide the needed protection. Through design, analysis, and testing, new parts that can withstand the hostile environments were developed. (5) Tribology Applications - Identification of tribology issues in the Railroad industry which play a significant role in the improvement of energy usage. Research team analyzed and developed solutions which resulted in friction

  5. Crowding-out effect of coal industry investment in coal mining area: taking Shanxi province in China as a case.

    Science.gov (United States)

    Li, Li; Lei, Yalin; Xu, Qun; Wu, Sanmang; Yan, Dan; Chen, Jiabin

    2017-10-01

    The rapid development of coal industry in Shanxi province in China has important effects on its economic development. A large amount of money has been invested into the coal industry and other related industries during the recent years. However, research on the investment effect of Shanxi's coal industry was rare. In order to analyze the investment effect of coal industry, based on the crowding-out effect model, cointegration test, and the data available in Shanxi Statistical Yearbooks, this paper calculates the effect between coal industry investment and other 17 industry investment. The results show that the investment of coal industry produces crowding-out effect on food industry, building materials industry, and machinery industry. Increasing 1% of the coal industry investment can reduce 0.25% of the food industry investment, or 0.6% of building materials industry investment, or 0.52% of the machinery industry investment, which implies that Shanxi province should adjust coal industrial structure, promote the balance development of coal industry and other industries, so as to promote its economic growth.

  6. Office of Industrial Technologies research in progress

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The US Department of Energy (DOE) Office of Industrial Technologies (OIT) conducts research and development activities which focus on improving energy efficiency and providing for fuel flexibility within US industry in the area of industrial conservation. The mission of OIT is to increase the utilization of existing energy-efficient equipment and to find and promote new, cost-effective ways for industrial facilities to improve their energy efficiency and minimize waste products. To ensure advancement of the technological leadership of the United States and to improve the competitiveness of American industrial products in world markets, OIT works closely with industrial partners, the staffs of the national laboratories, and universities to identify research and development needs and to solve technological challenges. This report contains summaries of the currently active projects supported by the Office of Industrial Technologies.

  7. Production and utilization of biogas in rural areas of industrialized and developing countries. Rev. Ed

    Energy Technology Data Exchange (ETDEWEB)

    Eggeling, G; Mackensen, G; Sasse, L [comps.

    1986-01-01

    This handbook describes and compares the various phases of biogas technology and its parallel development in industrialized countries and developing nations for the given agricultural situation in each. Special emphasis is placed on the microbiological fundamentals of anaerobic fermentation, their technical application, examples of biogas systems in industrialized and emerging nations, cost efficiency and implementation. In their treatment of various common characteristics, parallels and differences, the authors have attempted to build a bridge between biogas practice in industrialized countries and biogas practice in developing countries.

  8. 76 FR 22338 - Proposed Fort Ross-Seaview Viticultural Area; Comment Period Reopening

    Science.gov (United States)

    2011-04-21

    ... May 9, 2005, from all interested persons. In response to a request from a local wine industry member... the Fort Ross-Seaview viticultural area. Two local wine industry members supported the petition without qualification; a third industry member supported the viticultural area's establishment while...

  9. Informal e-waste recycling: environmental risk assessment of heavy metal contamination in Mandoli industrial area, Delhi, India.

    Science.gov (United States)

    Pradhan, Jatindra Kumar; Kumar, Sudhir

    2014-01-01

    Nowadays, e-waste is a major source of environmental problems and opportunities due to presence of hazardous elements and precious metals. This study was aimed to evaluate the pollution risk of heavy metal contamination by informal recycling of e-waste. Environmental risk assessment was determined using multivariate statistical analysis, index of geoaccumulation, enrichment factor, contamination factor, degree of contamination and pollution load index by analysing heavy metals in surface soils, plants and groundwater samples collected from and around informal recycling workshops in Mandoli industrial area, Delhi, India. Concentrations of heavy metals like As (17.08 mg/kg), Cd (1.29 mg/kg), Cu (115.50 mg/kg), Pb (2,645.31 mg/kg), Se (12.67 mg/kg) and Zn (776.84 mg/kg) were higher in surface soils of e-waste recycling areas compared to those in reference site. Level exceeded the values suggested by the US Environmental Protection Agency (EPA). High accumulations of heavy metals were also observed in the native plant samples (Cynodon dactylon) of e-waste recycling areas. The groundwater samples collected form recycling area had high heavy metal concentrations as compared to permissible limit of Indian Standards and maximum allowable limit of WHO guidelines for drinking water. Multivariate analysis and risk assessment studies based on total metal content explains the clear-cut differences among sampling sites and a strong evidence of heavy metal pollution because of informal recycling of e-waste. This study put forward that prolonged informal recycling of e-waste may accumulate high concentration of heavy metals in surface soils, plants and groundwater, which will be a matter of concern for both environmental and occupational hazards. This warrants an immediate need of remedial measures to reduce the heavy metal contamination of e-waste recycling sites.

  10. Industrial pressurized fluidized-bed combustors, 1992

    International Nuclear Information System (INIS)

    Bonk, D.; Hand, T.; Freier, M.

    1992-01-01

    Coal-fired Pressurized Fluidized-Bed Combustion (PFBC) systems offer the advantages of high efficiency removal of sulfur during combustion, and inherently low NO x emissions; advantages which support the National Energy Strategy (NES). The Morgantown Energy Technology Center (METC) of the US Department of Energy (DOE) has recently completed studies of coal-fired PFBC in an industrial setting. In addition to in-house studies, interest in industrial sized PFBC's has emerged in the DOE's Clean Coal Technology demonstration program. Reviewing information from these two areas provides some insight into an industrial market for PFBCs

  11. Illiteracy in Devon During the Industrial Revolution, 1754-1844

    Science.gov (United States)

    Stephens, W. B.

    1976-01-01

    Indicates the likelihood that the initial period of the Industrial Revolution was one of deteriorating educational standards in most areas, especially in those that were seats of displaced domestic textile industries. (Author)

  12. Radiation protection for industrial radiography in the aerospace industry

    International Nuclear Information System (INIS)

    Morgan, W.E.

    1980-01-01

    The Boeing Company employs 80 industrial radiographers, operates 90 radiation sources, and takes 10,000 exposures per month. This paper describes the major components of Boeing's radiation protection program: hazard analysis, facilities and equipment design, program administration, and evaluation. In the hazard analysis, each source of radiation is analyzed to determine its hazard and relationship to both man and the environment around it. Once the degree of the hazard is known, facilities and equipment are designed to contain the hazard. This can be anything from a four foot concrete shielded room for an industrial radiographic accelerator, to a piece of rope that isolates an Iridium-192 source during a field radiographic inspection on an aircraft. The administrative functions provide the necessary records, command media, and a radiation source certification program. This certification authorizes the source of radiation to be used under specific conditions agreed upon by both the Radiation Protection Organization and Industrial Radiography Management. The radiation protection program is evaluated through medical exams, personnel monitoring, and area radiation surveys. (H.K.)

  13. Dry deposition and soil-air gas exchange of polychlorinated biphenyls (PCBs) in an industrial area.

    Science.gov (United States)

    Bozlaker, Ayse; Odabasi, Mustafa; Muezzinoglu, Aysen

    2008-12-01

    Ambient air and dry deposition, and soil samples were collected at the Aliaga industrial site in Izmir, Turkey. Atmospheric total (particle+gas) Sigma(41)-PCB concentrations were higher in summer (3370+/-1617 pg m(-3), average+SD) than in winter (1164+/-618 pg m(-3)), probably due to increased volatilization with temperature. Average particulate Sigma(41)-PCBs dry deposition fluxes were 349+/-183 and 469+/-328 ng m(-2) day(-1) in summer and winter, respectively. Overall average particulate deposition velocity was 5.5+/-3.5 cm s(-1). The spatial distribution of Sigma(41)-PCB soil concentrations (n=48) showed that the iron-steel plants, ship dismantling facilities, refinery and petrochemicals complex are the major sources in the area. Calculated air-soil exchange fluxes indicated that the contaminated soil is a secondary source to the atmosphere for lighter PCBs and as a sink for heavier ones. Comparable magnitude of gas exchange and dry particle deposition fluxes indicated that both mechanisms are equally important for PCB movement between air and soil in Aliaga.

  14. Fish consumption risk perception among anglers in an industrial urban area

    Science.gov (United States)

    Cherie LeBlanc Fisher; Lynne M. Westphal; Mario Longoni

    2010-01-01

    Over two summers, we conducted field interviews with anglers in the industrial Calumet Region of northwest Indiana and southeast Chicago. The data collected provide insight into how anglers assess the risks of eating the fish they catch. Some anglers practiced catch and release because of concerns about water pollution while others just did not eat fish. Those who ate...

  15. Marion Industrial Substation project

    International Nuclear Information System (INIS)

    1992-04-01

    Consumers Power, Inc. (CPI), proposes to construct a new distribution substation under the existing Bonneville Power Administration (BPA) Albay-Lebanon transmission line near the city of Albany in Linn County, Oregon. BPA is proposing to grant a new Point of Delivery to CPI at this substation. The purpose of the project is to serve the developing industrial needs in the Marion Industrial Park and on the 550 acres of nearby land within CPI's service area that are zoned for residential use. CPI prepared, and the Rural Electrification Administration (REA) has approved a Borrower's Environmental Report (BER) which addresses this action along with several other proposed projects in the CPI service area. Portions of this BER are summarized in this brief EA. BPA is preparing its own EA since Department of Energy National Environmental Policy Act (NEPA) guidelines require additional environmental concerns to be addressed than are required by REA's NEPA guidelines

  16. DAMPAK PEMBANGUNAN KAWASAN INDUSTRI CANDI PADA PERILAKU BANJIR KALI SILANDAK KOTA SEMARANG

    Directory of Open Access Journals (Sweden)

    Dewi Liesnoor Setyowati

    2013-06-01

    Full Text Available There have been land changes in the Watershed of Silandak such as deforestation, changes in land use, and construction of the Candi Industrial Zone. The purpose of the study is: 1 find out the broad development of the industrial area of Candi in 1994-2010, 2 determine the distribution of flood-prone areas of Silandak river, and 3 know the impact of development of Candi Industrial Zone on the flood behavior of Silandak river. The study was conducted at Candi Industrial Zone which is located in the watershed of Silandak river. The analysis technique used are literature studies, ecological approach and descriptive analysis. The distribution of flood-prone areas were analyzed based on the identification of land use maps, land elevation and peak flow discharge. Dominant land use change tend to the direction of settlement and industry. Settlement wide in 1994 amounted to 371.82 hectares, in 2010 increased to 486.35 hectares, and in 1994 the industry total area of 16.10 hectares in 2010 increased to 319.04 hectares. The land use change give impacts on the peak flow discharge increases, from 1.47 m3/second in 1994 increased to 7.23 m3/second in 2010. Flood prone areas that are waterlogged for the longest are located in the Village of Krapyak, Tambakharjo, Jerakah and Tugurejo, while the location of flood prone areas without waterlog are in Tambakaji, Ngaliyan, Bambankerep, Kalipancur, Purwoyoso. The social impact of the development of Candi Industrial Zone is outlined by air quality, noise, land use, the potential for water, waste management, transportation, employment, social unrest, public perception, comfort, and safety.

  17. DAMPAK PEMBANGUNAN KAWASAN INDUSTRI CANDI PADA PERILAKU BANJIR KALI SILANDAK KOTA SEMARANG

    Directory of Open Access Journals (Sweden)

    Dewi Liesnoor Setyowati

    2013-06-01

    Full Text Available There have been land changes in the Watershed of Silandak such asdeforestation, changes in land use, and construction of the Candi Industrial Zone. The purpose of the study is: 1 find out the broad development of the industrial area of Candi in 1994-2010, 2 determine the distribution of flood-prone areas of Silandak river, and 3 know the impact of development of Candi Industrial Zone on the flood behavior of Silandak river. The study was conducted at Candi Industrial Zone which is located in the watershed of Silandak river. The analysis technique used are literature studies, ecological approach and descriptive analysis. The distribution of flood-prone areas were analyzed based on the identification of land use maps, land elevation and peak flow discharge. Dominant land use change tend to the direction of settlement and industry. Settlement wide in 1994 amounted to 371.82 hectares, in 2010 increased to 486.35 hectares, and in 1994 the industry total area of 16.10 hectares in 2010 increased to 319.04 hectares. The land use change give impacts on the peak flow discharge increases, from 1.47 m3/second in 1994 increased to 7.23 m3/second in 2010. Flood prone areas that are waterlogged for the longest are located in the Village of Krapyak, Tambakharjo, Jerakah and Tugurejo, while the location of flood prone areas without waterlog are in Tambakaji, Ngaliyan, Bambankerep, Kalipancur, Purwoyoso. The social impact of the development of Candi Industrial Zone is outlined by air quality, noise, land use, the potential for water, waste management, transportation, employment, social unrest, public perception, comfort, and safety.

  18. Strategy for developing of small medium industry to creative industry in special culinary, Sarolangun Regency

    Directory of Open Access Journals (Sweden)

    Fitriaty Fitriaty

    2018-03-01

    Full Text Available This study aims to obtain a description of small and medium industries in the area of regional culinary Sarolangun, internal and external factors and formulate strategies to develop the industry to become a creative industry. The method that is used SWOT analysis,  descriptive and qualitative analysis. Based on the research result found that the culinary that can be developed is coconut bread, dodol, kipang cake and curry fish curry fish. The weakness of internal factors lies in working capital, human resources, and external factors lie in marketing and institutional. The recommended strategy is to turn around. Keywords: SME’s, Culinary, SWOT Analysis, Turn around

  19. The making and remaking of dismissed industrial sites

    NARCIS (Netherlands)

    Curulli, G.I.

    2014-01-01

    The Making and Remaking of Dismissed Industrial Sites examines the transformation of former industrial areas and the implications of the design of reuse with aesthetics, context, history and memory, public space and reclamation of contaminated soils. Through a critical investigation of these

  20. Ammonia-oxidizing bacteria and archaea in wastewater treatment plant sludge and nearby coastal sediment in an industrial area in China.

    Science.gov (United States)

    Zhang, Yan; Chen, Lujun; Sun, Renhua; Dai, Tianjiao; Tian, Jinping; Wen, Donghui

    2015-05-01

    Under the increasing pressure of human activities, Hangzhou Bay has become one of the most seriously polluted waters along China's coast. Considering the excessive inorganic nitrogen detected in the bay, in this study, the impact of an effluent from a coastal industrial park on ammonia-oxidizing microorganisms (AOMs) of the receiving area was interpreted for the first time by molecular technologies. Revealed by real-time PCR, the ratio of archaeal amoA/bacterial amoA ranged from 5.68 × 10(-6) to 4.79 × 10(-5) in the activated sludge from two wastewater treatment plants (WWTPs) and 0.54-3.44 in the sediments from the effluent receiving coastal area. Analyzed by clone and pyrosequencing libraries, genus Nitrosomonas was the predominant ammonia-oxidizing bacteria (AOB), but no ammonia-oxidizing archaea (AOA) was abundant enough for sequencing in the activated sludge from the WWTPs; genus Nitrosomonas and Nitrosopumilus were the dominant AOB and AOA, respectively, in the coastal sediments. The different abundance of AOA but similar structure of AOB between the WWTPs and nearby coastal area probably indicated an anthropogenic impact on the microbial ecology in Hangzhou Bay.

  1. Regulatory trends in the battery industry

    International Nuclear Information System (INIS)

    McColl, K.G.

    1994-01-01

    The scope of regulations in the battery industry is extensive and also complex. In the future, regulations will become more demanding and will encompass issues not currently considered. Increased focus on environmental issues by government bodies, environmental groups, local communities will result in more strict compliance standards. The USA is currently leading the world's battery industries in the scope and compliance level of regulations. By studying trends in the USA, the rest of the battery industry can prepare itself for the future operating environment. This paper reviews the most critical areas of air pollution, blood-lead levels and recycling. The paper concludes that the battery industry must adopt a culture of exceeding current compliance standards. (orig.)

  2. Brazil's energy industry in a crisis

    International Nuclear Information System (INIS)

    Sangmeister, H.

    1988-01-01

    In volume 8/1986 of this periodical, Brazil's moving away from the program for the building and expansion of a national nuclear power industry had been reported on back of foreign currencies and urgently necessary saving measures of the public means influence not only the construction of nuclear power plants, they also decay instruments in other areas of energy industry. In the area of electric power, some nationalisations have already taken place and in petroleum supply, the need for imports is increasing again. Furthermore, there is reason to believe that some of the energy-political solutions which Brazil had chosen as answers to the petroleum price shocks of 1973/74 and 1979/80 are likely to lead to some considerable problems in the near future. In the middle of these crises in which Brazil's energy industry has been for some time now, there is nonetheless one spectacular event. Brazil's President, Mr. Jose Sarney, announced the command of the nuclear cycle by means of national technology. (orig.) [de

  3. Photovoltaic industry manufacturing technology. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Vanecek, D.; Diver, M.; Fernandez, R. [Automation and Robotics Research Inst., Fort Worth, TX (United States)

    1998-08-01

    This report contains the results of the Photovoltaic (PV) Industry Manufacturing Technology Assessment performed by the Automation and Robotics Research Institute (ARRI) of the University of Texas at Arlington for the National Renewable Energy laboratory. ARRI surveyed eleven companies to determine their state-of-manufacturing in the areas of engineering design, operations management, manufacturing technology, equipment maintenance, quality management, and plant conditions. Interviews with company personnel and plant tours at each of the facilities were conducted and the information compiled. The report is divided into two main segments. The first part of the report presents how the industry as a whole conforms to ``World Class`` manufacturing practices. Conclusions are drawn from the results of a survey as to the areas that the PV industry can improve on to become more competitive in the industry and World Class. Appendix A contains the questions asked in the survey, a brief description of the benefits to performing this task and the aggregate response to the questions. Each company participating in the assessment process received the results of their own facility to compare against the industry as a whole. The second part of the report outlines opportunities that exist on the shop floor for improving Process Equipment and Automation Strategies. Appendix B contains the survey that was used to assess each of the manufacturing processes.

  4. Commercial/industrial photovoltaic module and array requirement study. Low-cost solar array project engineering area

    Science.gov (United States)

    1981-01-01

    Design requirements for photovoltaic modules and arrays used in commercial and industrial applications were identified. Building codes and referenced standards were reviewed for their applicability to commercial and industrial photovoltaic array installation. Four general installation types were identified - integral (replaces roofing), direct (mounted on top of roofing), stand-off (mounted away from roofing), and rack (for flat or low slope roofs, or ground mounted). Each of the generic mounting types can be used in vertical wall mounting systems. This implies eight mounting types exist in the commercial/industrial sector. Installation costs were developed for these mounting types as a function of panel/module size. Cost drivers were identified. Studies were performed to identify optimum module shapes and sizes and operating voltage cost drivers. The general conclusion is that there are no perceived major obstacles to the use of photovoltaic modules in commercial/industrial arrays.

  5. In vitro and in vivo toxicities of sediment and surface water in an area near a major steel industry of Korea: endocrine disruption, reproduction, or survival effects combined with instrumental analysis.

    Science.gov (United States)

    Kim, Sunmi; Lee, Sangwoo; Kim, Cheolmin; Liu, Xiaoshan; Seo, Jihyun; Jung, Hyorin; Ji, Kyunghee; Hong, Seongjin; Park, Jinsoon; Khim, Jong Seong; Yoon, Seokmin; Lee, Woojin; Park, Jeongim; Choi, Kyungho

    2014-02-01

    The influence of industrial and/or municipal contaminant inputs on the aquatic environment of Pohang, Korea was investigated, with a focus on bioassay combined with instrumental analysis. Pohang is the most heavily populated city in Gyeongsangbuk-do province of Korea, with more than half a million residents, and also hosts the nation's biggest steel manufacturer and related industries. Sediment (n=15) and surface water samples (n=17) were collected from Hyeongsan River which runs across the Pohang city, in two separate events, i.e., June 2010 and February 2011. Sediment samples were first Soxhlet-extracted (raw extract) and were measured for estrogenicity using H295R cell line, and also analyzed for alkylphenols (APs), bisphenol A (BPA), PAHs, and PCBs. For sediment samples which exhibited greatest effects in the cell line, further fractionation was performed into non-polar, mid-polar, and polar portions. In surface water samples, heavy metals were also analyzed. Among 15 sediment samples, station S2 near the steel industry complex and station M3 near the municipal area showed the greatest sex hormone changes, and these changes were generally explained by the fractions which contained APs and BPA. Principal component analysis (PCA) however suggests that chemicals that were not analyzed in the present study would better explain endocrine disruption capacity of sediments. In water samples, adverse effects on hatchability and growth of Japanese medaka fish, and on Daphnia reproduction were noted following exposure to six water samples collected from stations near industrial and municipal areas. Several heavy metals and nonylphenol (NP) concentrations exceeded surface water quality guidelines, suggesting adverse effects of contamination inputs from both industrial and municipal activities. Observed estrogenicities in stations such as S2 and M3 warrant further investigations on longer term ecosystem impacts near industrial and municipal areas. The levels of major

  6. Coal industry - problems and prospects. [United Kingdom

    Energy Technology Data Exchange (ETDEWEB)

    Siddall, N

    1984-01-01

    Presidential Address by Sir Norman Siddall is presented which considers the problems and prospects facing the UK coal industry. The range of changes which business management is subject to are outlined together with the coal industry's response to these changes. Fluctuations in the energy market and the economy have resulted in a customer orientated approach to marketing, and improved efficiency throughout the industry. New technology has increased the efficiency of some aspects of operations but at the some time developments in the areas of industrial relations and public accountability have limited management's ability to respond to changes in the commercial environment.

  7. Possibilities for a geothermal energy and mineral industrial complex in the Salton Sea area

    Energy Technology Data Exchange (ETDEWEB)

    Hornburg, C.D.; Meriwether, J.

    1977-11-16

    The overall development of the Salton Sea KGRA by developing industrial complexes is discussed. These would make maximum utiliztion of the total resource by on-site utilization of extracted energy and minerals; and upgrading these minerals via industrial processes to higher value products. A typical analysis of Salton Sea brine and an estimation of amounts and values of some materials that may be extracted from Salton Sea brines are presented. (MHR)

  8. 7 CFR 1940.959 - Area plan.

    Science.gov (United States)

    2010-01-01

    ..., and time lines based on a realistic assessment of the area, including, but not limited to, the... possibilities for industrial recruitment in the area; (5) The potential for development of tourism in the area... expansion of existing businesses; and (7) The potential to produce value-added agricultural products in the...

  9. Electricity conflicts. Self-conception and strategic action of the electricity industry between politics, industry, the environment and the public (1970-1989)

    International Nuclear Information System (INIS)

    Erhardt, Hendrik

    2017-01-01

    The energy industry has undergone a fundamental transformation process over the past 50 years. The author examines in this study the beginnings and challenges of this process since the 1970s on the basis of previously unevaluated corporate and association sources. For the areas of energy demand, industry and the environment and the public, the author analyzes the behavior of the electricity industry, which since the 1970s has been moving between persistence and change pressure. What leeway did the companies have in these three areas? How did the energy suppliers' actions shape the German energy system? And how did their actions change their image in public? These questions the changes in the energy industry have so far neither been scientifically adequately investigated nor adequately reflected by the actors themselves. The results of the work thus make an important contribution to the analysis of the beginnings the energy transition. [de

  10. Industrial applications of electron accelerators

    International Nuclear Information System (INIS)

    Singh, A.

    1994-01-01

    The interaction of high-energy radiation with organic systems produces very reactive, short-lived, ionic and free-radical species. The chemical changes brought about by these species are very useful in several systems, and are the basis of the growth of the electron processing industry. Some typical areas of the industrial use of electron accelerators are crosslinking wire and cable insulation, manufacturing heat shrink plastic items, curing coatings, and partially curing rubber products. Electron accelerators are also being considered in other areas such as sewage treatment, sterilizing medical disposables, and food irradiation. An emerging application of industrial electron accelerators is the production of advanced composites for the aerospace and other industries. Traditionally, the carbon-, aramid- and glass-fibre-reinforced composites with epoxy matrices are produced by thermal curing. However, equivalent composites with acrylated-epoxy matrices can be made by electron curing. Cost estimates suggest that electron curing could be more economical than thermal curing. Food irradiation has traditionally been an application for 60 Co γ-radiation. With the increasing demand for food irradiation in various countries, it may become necessary to use electron accelerators for this purpose. Since the dose rate during gamma and electron irradiation are generally very different, a review of the relevant work on the effect of dose rates has been done. This paper presents an overview of the industrial applications of electron accelerator for radiation processing, emphasises the electron curing of advanced composites and, briefly reviews the dose-rate effects in radiation processing of advanced composites and food irradiation. (author). 84 refs., 8 tabs

  11. Childhood leukemia and residential proximity to industrial and urban sites

    International Nuclear Information System (INIS)

    García-Pérez, Javier; López-Abente, Gonzalo; Gómez-Barroso, Diana; Morales-Piga, Antonio; Pardo Romaguera, Elena; Tamayo, Ibon; Fernández-Navarro, Pablo

    2015-01-01

    Background: Few risk factors for the childhood leukemia are well established. While a small fraction of cases of childhood leukemia might be partially attributable to some diseases or ionizing radiation exposure, the role of industrial and urban pollution also needs to be assessed. Objectives: To ascertain the possible effect of residential proximity to both industrial and urban areas on childhood leukemia, taking into account industrial groups and toxic substances released. Methods: We conducted a population-based case–control study of childhood leukemia in Spain, covering 638 incident cases gathered from the Spanish Registry of Childhood Tumors and for those Autonomous Regions with 100% coverage (period 1990-2011), and 13,188 controls, individually matched by year of birth, sex, and autonomous region of residence. Distances were computed from the respective subject’s residences to the 1068 industries and the 157 urban areas with ≥10,000 inhabitants, located in the study area. Using logistic regression, odds ratios (ORs) and 95% confidence intervals (95%CIs) for categories of distance to industrial and urban pollution sources were calculated, with adjustment for matching variables. Results: Excess risk of childhood leukemia was observed for children living near (≤2.5 km) industries (OR=1.31; 95%CI=1.03–1.67) – particularly glass and mineral fibers (OR=2.42; 95%CI=1.49–3.92), surface treatment using organic solvents (OR=1.87; 95%CI=1.24–2.83), galvanization (OR=1.86; 95%CI=1.07–3.21), production and processing of metals (OR=1.69; 95%CI=1.22–2.34), and surface treatment of metals (OR=1.62; 95%CI=1.22–2.15) – , and urban areas (OR=1.36; 95%CI=1.02–1.80). Conclusions: Our study furnishes some evidence that living in the proximity of industrial and urban sites may be a risk factor for childhood leukemia. - Highlights: • We studied proximity to both industrial and urban sites on childhood leukemia. • We conducted a case–control study in

  12. Childhood leukemia and residential proximity to industrial and urban sites

    Energy Technology Data Exchange (ETDEWEB)

    García-Pérez, Javier, E-mail: jgarcia@isciii.es [Cancer and Environmental Epidemiology Unit, National Center for Epidemiology, Carlos III Institute of Health, Madrid (Spain); CIBER Epidemiología y Salud Pública (CIBERESP) (Spain); López-Abente, Gonzalo, E-mail: glabente@isciii.es [Cancer and Environmental Epidemiology Unit, National Center for Epidemiology, Carlos III Institute of Health, Madrid (Spain); CIBER Epidemiología y Salud Pública (CIBERESP) (Spain); Gómez-Barroso, Diana, E-mail: dgomez@externos.isciii.es [CIBER Epidemiología y Salud Pública (CIBERESP) (Spain); National Center for Epidemiology, Carlos III Institute of Health, Madrid (Spain); Morales-Piga, Antonio, E-mail: amorales@isciii.es [Rare Disease Research Institute (IIER), Carlos III Institute of Health, Madrid (Spain); Consortium for Biomedical Research in Rare Diseases (CIBERER), Madrid (Spain); Pardo Romaguera, Elena, E-mail: elena.pardo@uv.es [Spanish Registry of Childhood Tumors (RETI-SEHOP), University of Valencia, Valencia (Spain); Tamayo, Ibon, E-mail: ibontama@gmail.com [Public Health Division of Gipuzkoa, BIODonostia Research Institute, Department of Health of the Regional Government of the Basque Country, Donostia (Spain); Fernández-Navarro, Pablo, E-mail: pfernandezn@isciii.es [Cancer and Environmental Epidemiology Unit, National Center for Epidemiology, Carlos III Institute of Health, Madrid (Spain); CIBER Epidemiología y Salud Pública (CIBERESP) (Spain); and others

    2015-07-15

    Background: Few risk factors for the childhood leukemia are well established. While a small fraction of cases of childhood leukemia might be partially attributable to some diseases or ionizing radiation exposure, the role of industrial and urban pollution also needs to be assessed. Objectives: To ascertain the possible effect of residential proximity to both industrial and urban areas on childhood leukemia, taking into account industrial groups and toxic substances released. Methods: We conducted a population-based case–control study of childhood leukemia in Spain, covering 638 incident cases gathered from the Spanish Registry of Childhood Tumors and for those Autonomous Regions with 100% coverage (period 1990-2011), and 13,188 controls, individually matched by year of birth, sex, and autonomous region of residence. Distances were computed from the respective subject’s residences to the 1068 industries and the 157 urban areas with ≥10,000 inhabitants, located in the study area. Using logistic regression, odds ratios (ORs) and 95% confidence intervals (95%CIs) for categories of distance to industrial and urban pollution sources were calculated, with adjustment for matching variables. Results: Excess risk of childhood leukemia was observed for children living near (≤2.5 km) industries (OR=1.31; 95%CI=1.03–1.67) – particularly glass and mineral fibers (OR=2.42; 95%CI=1.49–3.92), surface treatment using organic solvents (OR=1.87; 95%CI=1.24–2.83), galvanization (OR=1.86; 95%CI=1.07–3.21), production and processing of metals (OR=1.69; 95%CI=1.22–2.34), and surface treatment of metals (OR=1.62; 95%CI=1.22–2.15) – , and urban areas (OR=1.36; 95%CI=1.02–1.80). Conclusions: Our study furnishes some evidence that living in the proximity of industrial and urban sites may be a risk factor for childhood leukemia. - Highlights: • We studied proximity to both industrial and urban sites on childhood leukemia. • We conducted a case–control study in

  13. The Geography of the Alzheimer's Disease Mortality in Spain: Should We Focus on Industrial Pollutants Prevention?

    Science.gov (United States)

    2017-11-25

    Alzheimer's disease (AD) has a high worldwide prevalence but little is known about its aetiology and risk factors. Recent research suggests environmental factors might increase AD risk. We aim to describe the association between AD mortality and the presence of highly polluting industry in small areas in Spain between 1999 and 2010. We calculated AD age-adjusted Standardized Mortality Ratio (SMR), stratified by sex, grouped by industrial pollution density, compared for each small area of Spain. In the small areas with the highest mortality, the SMR among women was at least 25% greater than the national average (18% in men). The distribution of AD mortality was generally similar to that of high industrial pollution (higher mortality in the north, the Mediterranean coast and in some southern areas). The risk of AD mortality among women was 140% higher (123% among men) in areas with the highest industrial density in comparison to areas without polluting industries. This study has identified a geographical pattern of small areas with higher AD mortality risk and an ecological positive association with the density of highly polluting industry. Further research is needed on the potential impact of this type of industry pollution on AD aetiology and mortality.

  14. Rural development policy and food industry development

    DEFF Research Database (Denmark)

    Baker, Derek; Abildtrup, Jens; Hedetoft, Anders

    2007-01-01

    Food industry firms in remote areas face a set of constraints, which have motivated the form and function of assistance instruments under various regional and rural development programmes. Recent food industry developments present new challenges to these firms, for which available assistance may...... be less appropriate. This paper employs telephone interviews and workshop discussions with firms in isolated locations to investigate their satisfaction with assistance programmes, their ability to innovate (through product introductions) and respond to challenges in the food industry (the emergence...

  15. Vision servo of industrial robot: A review

    Science.gov (United States)

    Zhang, Yujin

    2018-04-01

    Robot technology has been implemented to various areas of production and life. With the continuous development of robot applications, requirements of the robot are also getting higher and higher. In order to get better perception of the robots, vision sensors have been widely used in industrial robots. In this paper, application directions of industrial robots are reviewed. The development, classification and application of robot vision servo technology are discussed, and the development prospect of industrial robot vision servo technology is proposed.

  16. Emergency lighting for industrial, commercial and residential premises

    CERN Document Server

    Lyons, X

    2013-01-01

    Emergency Lighting: For Industrial, Commercial and Residential Premises concerns itself with the provision of emergency lighting to facilitate exit routes for people in industrial, commercial, and residential areas. The book covers important topics such as the objectives of emergency lighting systems; the identification of safe routes under low lighting in different areas; and related devices such as luminaires, emergency signs, and way-guidance. Also discussed are the applications of emergency lighting; factors to consider in the design of emergency lighting; electrical installations; and tes

  17. The revitalization of Bucharest’s center surrounding areas by reconverting the industrial heritage

    Directory of Open Access Journals (Sweden)

    Claudiu Bîță

    2017-12-01

    Full Text Available This article discusses about the importance of the industrial revolution and the remains left behind from its beginnings, which reminds us of an extremely important period very different from our own. The architecture of the industrial sites from the second half of the 19th century and the beginning of the 20th century shows us both a unique architectural style, created by the economic needs of that time, but also a way of life and socio-economic development for cities. To not lose important remains such as this, in this study, we proposed the transformation of the important industrial complexes and buildings in Bucharest decided by their history and former functions, adding innovative elements to grow their attractiveness. These buildings currently in a state of degradation, once transformed into different cultural attractions, will have the purpose of increasing the quality of the spaces around the city’s center, will help with the gentrifying process of the city’s abandoned zones, with growing the attractiveness and the revenues of the city and at the same time they will keep alive the history of the city through elements of identity which lead to its development.

  18. Industrial relocation and energy consumption: Evidence from China

    International Nuclear Information System (INIS)

    Zhao Xiaoli; Yin Haitao

    2011-01-01

    With economic development and the change of industrial structure, industrial relocation is an inevitable trend. In the process of industrial relocation, environmental externality and social cost could occur due to market failure and government failure. Little attention has been paid to this issue. In this paper, we address it with a theoretical analysis and an empirical investigation on the relationship between China's industrial relocation in the early 1990s and energy consumption which is the primary source of CO 2 emission, an environmental externality that causes increasing concerns. The macro-policy analysis suggests that there would be a positive link between China's industrial relocation in the early 1990s and energy saving (and environmental externalities reduction). Using fixed-effect regression model and simulation method, we provide an empirical support to this argument. In order to further reduce environmental externalities and social cost in the process of industrial relocation, we provide policy suggestions as follows: First, strengthen the evaluation of environmental benefits/costs; Second, pay more attention to the coordinated social-economic development; Third, avoid long-lived investment in high-carbon infrastructure in areas with industries moved in; Fourth, address employment issue in the areas with industries moved out. - Research highlights: → Little attention has been paid to the linkage between industrial relocation and environmental externality. → Our macro-policy analysis suggests that there would be a positive link between China's industrial relocation in the early 1990s and energy saving (and environmental externalities reduction). → Using fixed-effect regression model and simulation method, we find a positive link between China's industrial relocation in the early 1990s and energy saving. → Policy suggestions to further reduce environmental externalities and social cost in the process of industrial relocation are discussed.

  19. Technology Transfer In Rural Industries of Thailand: The Case of Dessert And Palm Tree Industries

    Directory of Open Access Journals (Sweden)

    Apisek Pansuwan

    2013-07-01

    Full Text Available In last decade, the small industrial sector has increasingly received attention from Thai policy makers. This study investigates the relationship between small industries and community in rural area in term of technology transfer. In the research area, knowledge and experience gathered from workplace as an employee and family businesses are the core resources to establish and run busineSses. Technically, technology transfer is divided into 2 characteristics; intra-enterprise and inter-enterprise. Intra-enterprise technology transfer comes from employers to employees, emphasizing production development. Beside, technology transfer of inter-enterprise has two directions. Firstly, direction points from the entrepreneur to material suppliers aiming to secure raw material quality. Secondly direction points from consumers to the entrepreneur aiming to put a great emphasis on product development, quality control and management.

  20. Integrated rural industrialization through biogas

    International Nuclear Information System (INIS)

    Anon.

    1992-01-01

    Role of biogas in rural industrialization in India is explained. The Khadi and Village Industries Commission has installed over 2 lakhs (0.2 million) biogas plants during the last 30 years. A 15 cu.m. capacity plant costs Rs. 35,000/-. It produces 65 tons bio-manure worth Rs. 13,000/- in a year and fuel gas equivalent to 3,285 litres of kerosene worth Rs. 9855/-. It provides employment to 300 man days. In addition to serving as a source of energy and manure, it reduces deforestation, solves rural sanitation problem and maintain environmental equilibrium. Industrial activities suitable for rural areas and which can use biogas as a source of power are indicated. (M.G.B.)

  1. Possibilities in concrete industry towards circular economy through industrial symbiosis

    Directory of Open Access Journals (Sweden)

    Bjegović Dubravka

    2014-01-01

    Full Text Available Major challenges of traditional linear concrete industry are utilisation of large amount of non-renewable resources and significant air emissions during production, utilisation and demolition of concrete structures. At the same time, concrete industry has a high potential for a positive shift towards more sustainable production and lower ecological footprint. One of the strategies is to use waste materials and byproducts from other industries as valuable raw materials in concrete industry. This loop can be closed only by taking into account properties of a certain waste material and using them for preparation of special purpose concrete products, in which these properties are favourable. Other strategy is designing concrete tailored for certain environment and service life, making it optimised for that specific purpose. The paper presents some of the available waste and recycled materials in Croatia and research focused on their potential application in civil engineering. The possibilities of utilisation are first explored in laboratory conditions, with the results presented in this paper as an outcome. Based on the obtained results some of the potential areas of application are proposed, in which concrete prepared with these waste materials becomes alternative to classical concrete. Both original scientific research results are presented, but also prototype of products produced based on the scientific research.

  2. ICT and the paperboard and packaging industry

    Science.gov (United States)

    Peter Ince; Sanna Kallioranta; Richard Vlosky

    2005-01-01

    The purpose of this chapter is to describe the reasons for the development of ICT and e-business systems in the paper and paperboard packaging industry and to discuss future scenarios that may serve to guide forest- sector research in this topical area. The paper and paperboard packaging industry encompasses producers of primary paper and paperboard packaging materials...

  3. Oil and gas industry, exploration and development

    International Nuclear Information System (INIS)

    Appert, O.

    1998-01-01

    A consistent investment boost on exploration and development, the favourable prospects connected with technological improvement, the opening of virgin areas of exploration are all factors granting extraordinary opportunities for the oil and gas industry. However, environmental constraints relevant to emission standards and products quality are also growing and will be increasingly binding upon both oil and car industries [it

  4. Dioxin-like chemicals in soil and sediment from residential and industrial areas in central South Africa.

    Science.gov (United States)

    Nieuwoudt, Claudine; Quinn, Laura P; Pieters, Rialet; Jordaan, Ilse; Visser, Maret; Kylin, Henrik; Borgen, Anders R; Giesy, John P; Bouwman, Henk

    2009-08-01

    Persistent organic pollutants (POPs) are a global concern due to their ubiquitous presence and toxicity. Currently, there is a lack of information regarding POPs from South Africa. Here we report and interpret concentrations of polychlorinated dibenzo-p-dioxins (PCDDs), -dibenzofurans (PCDFs) and co-planar-biphenyls (PCBs) in soils and sediments collected from central South Africa. High resolution gas chromatography-high resolution mass spectrometry (HRGC/HRMS) and the H4IIE-luc bio-assay were used to identify and quantify individual PCDD/F congeners and to report the total concentration of 2,3,7,8-tetrachloro dibenzo-p-dioxin equivalents (TCDD-EQ), respectively. TCDD-EQs determined by use of the bio-assay, and concentrations of WHO(2005)-TEQ (toxic equivalents) determined by chemical analysis, were similar. The limit of detection (LOD) for the bio-assay was 0.82 and 2.8 ng TCDD-EQ kg(-1), dw for sediment and soil, respectively. EQ20 concentrations determined by use of the bio-assay ranged from industrial area of Vanderbijlpark and the residential area of Klerksdorp contained the greatest concentrations. Based on the congener-specific HRGC/HRMS analyzes, concentrations of WHO(2005)-TEQ ranged from 0.12 to 32 ng WHO(2005)-TEQ kg(-1), dw in sediments, and between 0.34 and 20 ng WHO(2005)-TEQkg(-1), dw in soils. The sources, processes and threats that govern and are associated with the lesser concentrations in sediment and greater concentrations in soils need further investigation.

  5. Public-private partnerships in urban regeneration areas in Denmark

    DEFF Research Database (Denmark)

    Sørensen, Michael Tophøj; Aunsborg, Christian

    2006-01-01

    The paper focuses formal as well as informal public-private partnerships (PPP) in Danish urban regeneration areas. The concept ‘urban regeneration areas’ was introduced in the 2003 Planning Act as old, remaining industrial areas within the city boundaries by now were recognized as an ressource...... into housing while neighbouring noisy industries go on. Beyond this, from a municipal point of view there are several public interests to manage when old, remaining industrial areas face re-development. The motive of the municipal council can either be regulative (safeguarding certain financial or other public....../neighbour interests, e.g. exceeding what is directly permitted by written law) or supporting (encourage developers to re-develop an area, e.g. by subsidies). The purpose of the paper is to describe the range of possible partnerships between public and private partners, and to investigate their legal background...

  6. Damages of industrial equipments in the 1995 Hyougoken-Nanbu Earthquake

    International Nuclear Information System (INIS)

    Iwatsubo, Takuzo

    1997-01-01

    Hanshin-Awaji area has a population of approximately 3 million and many industries, including heavy industry, harbor facilities and international trading companies. The 1995 Hyougoken-Nanbu Earthquake occurred just in this area which is 25kmx2km oblong containing Kobe city. About 5,500 people were killed and 250,000 people lost their houses. Japan society of mechanical engineers organized the investigative committee of earthquake disaster of industrial equipments after the earthquake in order to investigate the disaster damages of industrial equipments and to give data for a design manual for mechanical equipments against earthquake excitation. This is an investigation report of the disaster damages of industrial machine equipments. Damages to machine equipment of industries in the high intensity region of the earthquake are illustrated. The mechanisms of the damages and measures against earthquake and safety of nuclear power plant design are discussed. Then it is known that the design of nuclear power plant is different from the general industrial facilities and the damage which was suffered in the general industrial facilities does not occur in the nuclear power plant. (J.P.N.)

  7. The Status of Industrial Ecology in Australia: Barriers and Enablers

    Directory of Open Access Journals (Sweden)

    Glen D. Corder

    2014-03-01

    Full Text Available Drawing on current international industrial ecology thinking and experiences with Australian initiatives, this article critically overviews the current status of industrial ecology in Australia and examines the barriers and potential strategies to realise greater uptake and application of the concept. The analysis is conducted across three categories: heavy industrial areas (including Kwinana and Gladstone, mixed industrial parks (Wagga Wagga and Port Melbourne, and waste exchange networks, and identifies the past and future significance of seven different types of barriers—regulation, information, community, economic, technical, cooperation and trust, commitment to sustainable development—for each of the three categories. The outcomes from this analysis highlight that regulation, information, and economic barriers for heavy industrial area and mixed industrial parks, and economic and technical barriers for waste exchange networks are the current and future focus for industrial ecology applications in Australia. These findings appear to be consistent with recently published frameworks and learnings. The authors propose key questions that could enhance greater adoption of industrial ecology applications in Australia and acknowledge that international research and experiences, while partly providing answers to these questions, need to be adapted and refined for the Australian context.

  8. Damages of industrial equipments in the 1995 Hyougoken-Nanbu Earthquake

    Energy Technology Data Exchange (ETDEWEB)

    Iwatsubo, Takuzo [Kobe Univ. (Japan). Faculty of Engineering

    1997-03-01

    Hanshin-Awaji area has a population of approximately 3 million and many industries, including heavy industry, harbor facilities and international trading companies. The 1995 Hyougoken-Nanbu Earthquake occurred just in this area which is 25kmx2km oblong containing Kobe city. About 5,500 people were killed and 250,000 people lost their houses. Japan society of mechanical engineers organized the investigative committee of earthquake disaster of industrial equipments after the earthquake in order to investigate the disaster damages of industrial equipments and to give data for a design manual for mechanical equipments against earthquake excitation. This is an investigation report of the disaster damages of industrial machine equipments. Damages to machine equipment of industries in the high intensity region of the earthquake are illustrated. The mechanisms of the damages and measures against earthquake and safety of nuclear power plant design are discussed. Then it is known that the design of nuclear power plant is different from the general industrial facilities and the damage which was suffered in the general industrial facilities does not occur in the nuclear power plant. (J.P.N.)

  9. The Development of Characteristic Industry in the Frontier Minority Area:Taking the Reindeer Industry in Aoluguya Ewenqi Nationality Village as an Example%边疆民族地区特色产业发展--以敖鲁古雅鄂温克族乡驯鹿产业为例

    Institute of Scientific and Technical Information of China (English)

    刘凯; 周文

    2016-01-01

    边疆民族地区社会发展滞后,经济技术基础薄弱,但资源丰富并具稀缺性。因此,密切结合边疆民族地区实际,走特色产业化的发展道路,是加快地区经济发展的现实选择。文章以敖鲁古雅鄂温克族乡驯鹿产业为例,阐述了边疆民族地区特色产业发展的现状,分析了特色产业促进了边疆民族地区的发展,探讨特色产业发展的方法,以达到促使经济快速、稳健、持续的发展的目的。%In the border minority regions, social development is slow and economic and technological foundation is weak, but resource is rich and scarce. Therefore, close combination with the actual of frontier minority area and development of characteristic industry are the realistic choice to accelerate regional economic development . In this paper, it takes the reindeer industry in Aoluguya Ewenqi Nationality Village as an example to expound the present situation of the development of characteristic industry in the frontier minority area, analyze that the characteristic industry has promoted the development of frontier minority areas and explore the methods of characteristic industry development, so as to make the economy fast, steady and sustainable development.

  10. Optimization and Simulation in the Danish Fishing Industry

    DEFF Research Database (Denmark)

    Jensen, Toke Koldborg; Clausen, Jens

    and simulation can be applied in a holistic modeling framework. Using the insights into supply chain theory and the Danish fishing industry, we investigate how the fishing industry as a whole may benefit from the formulation and use of mathematical optimization and simulation models. Finally, an appendix......We consider the Danish fishing industry from a holistic viewpoint, and give a review of the main aspects, and the important actors. We also consider supply chain theory, and identify both theoretically, and based on other application areas, e.g. other fresh food industries, how optimization...

  11. STRATEGI PENGEMBANGAN INDUSTRI PENGOLAHAN SABUT KELAPA NASIONAL

    Directory of Open Access Journals (Sweden)

    A. H. Intan

    2011-08-01

    Full Text Available Normal 0 false false false MicrosoftInternetExplorer4 st1\\:*{behavior:url(#ieooui } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} Empowerment of social economic resourceprograms must be able to conduct public economy dynamic which be based atvillage or country town. These programs must be able to achieve seven goals,such as rising public income and net export income; founding industrialstructure based on the strength of Small-Medium Enterprises; founding thefoundation of economic transition to industrial age by developing forces ofagribusiness and agroindustrial system; achieving global competitive advantageby increasing productivity, innovation, and effective technology dissemination;increasing quality product as well as the global quality standars; and creatingeconomic development to attain sustainability of high economics activity andperformance and keep sustainable quality environment.Coir processing industry is one of Indonesia isindustrial sub sector which was identified having the ability to achieve thesegoals. Several logical reasons are pointed out, such as that Indonesia has greatest coconut planted areas(about 3.76 Million hectares or 31.4 percent of coconut planted areas in theworld, so that Indonesiaget 24.4 percent of coconut production share in the world. Contrast with coirexport share, Indonesiahas only about 0.6 percent (595 MT of the world export market share. Untilyear 2000, Indonesiause only about 0.06 potential resources of coir production. So that, TheNational Coir Industry has strategic position ang high prospect will be developedat the next time

  12. Types of analysis of trompenaar's (1994 organizational culture prevailing in the area of controllership in family businesses in textile industry

    Directory of Open Access Journals (Sweden)

    Vanderlei dos Santos

    2010-01-01

    Full Text Available The study aims to identify the types of analysis of Trompenaar's (1994 organizational culture prevailing in the area of controllership in family businesses in textile industry. Descriptive research was performed, with quantitative and qualitative approach, using a multiple case study. Data were collected through interviews with the controller of the companies. In the four basic culture types suggested by Trompenaars (1994, it is concluded that there isn´t a pure kind, but there is a strong presence of family culture among the companies surveyed in dimensions relationship between employees, attitude in relation to the ways of change, forms of motivation and reward

  13. Redevelopment to Preserve Industrial Heritage. Appendix III

    International Nuclear Information System (INIS)

    2011-01-01

    Industrial archaeology, which emerged as a discipline in the 1950s, was first concerned with interpretation of surviving physical evidence to understand past human activity. Later on, and for the purposes of this report, it was recognized as a preservation movement concerned with ensuring the survival of a significant proportion of the industrial monuments of the past. In the latter sense, 'industrial heritage' was coined and the two terms 'industrial archaeology' and 'industrial heritage' are often taken to be synonymous. The traditional building blocks of heritage protection have been different types of assets: listed buildings, scheduled ancient monuments, areas of architectural and historic interest, or protected landscapes. Yet, it can be difficult to draw lines around what is important when a building sits in a landscape that is in turn part of a wider area. The idea of historic environment enables us to look at places as a whole. It also brings heritage closer to environmental thinking, since some of the same ideas about management, diversity and sustainability read across to a more environmental approach. Moreover, the wider values of the heritage should be recognized - as a learning resource, a social resource that involves people, as part of the environment and as a contributor to the economy. This is particularly important, since it signals a move away from heritage as a narrow, specialist interest, to recognizing that it is something that has relevance to many areas of modern life. Nevertheless, the idea of a historic environment with broad-ranging social and cultural values as well as historical value raises a number of problems. How, then, can society function, the economy develop or people live their lives effectively if this is followed? The key lies not so much in what is protected, but in how change occurs. The challenge for anyone operating the system is rather one of how to manage change: how to ensure that what is important is kept for future

  14. Source and chemical species characterization of PM10 and human health risk assessment of semi-urban, urban and industrial areas of West Bengal, India.

    Science.gov (United States)

    Ghosh, Suraj; Rabha, Rumi; Chowdhury, Mallika; Padhy, Pratap Kumar

    2018-09-01

    Levels of particulate matter of size ten micron (PM 10 ) in outdoor air, potential PM 10 -bound seven metals - manganese, zinc, cadmium, lead, copper, nickel and cobalt - and twelve water-soluble organic and inorganic ionic components - fluoride, acetate, chloride, nitrite, bromide, nitrate, phosphate, sulfate, oxalate, sodium, potassium and calcium - were investigated during two different season. Atmospheric PM 10 samples were collected concurrently from three different sites, i.e., Durgapur (Industrial), Berhampore (Urban) and Bolpur (Semi-urban), West Bengal, India, during summer (April-June 2014) and winter (December 2014-February 2015). Average PM 10 levels were found to be in the range of 189.58-219.96 μg/m 3 at the semi-urban site, 293.41-324.27 μg/m 3 at the urban site and 316.93-344.69 μg/m 3 at the industrial site during summer and winter season respectively. Data on metals and water soluble ions were analyzed statistically (Principal Component Analysis and Factor Analysis) for their source identification and apportionment in the study areas. Principle component analysis models, from three different sites, identified four different factors which share common sources, viz., soil & road re-suspension, motor vehicle and traffic, waste dumping, biomass aerosols, and construction. The pollution load and health risk assessments of selected metals were undertaken in three different sites, within children and adults of the study areas, and were found to be within the safe range. Furthermore, an attempt has also been made to provide basic information on pollution, their sources and exposure pathways for humans in the vicinity of semi-urban, urban and industrial regions. Copyright © 2018 Elsevier Ltd. All rights reserved.

  15. Brazilian industry evaluation system of performance on radiation protection in radioisotope gauges area

    International Nuclear Information System (INIS)

    Santos, Joyra A.; Borges, Jose C.

    1999-01-01

    The conventional industries more can see the advantages on doing their activities by using radioisotope gauges. This paper presents the methodology used to evaluation, by means of regulatory inspections, the performance on radiation protection of the Brazilian conventional industries in the field of radioisotope gauges. Sixty one inspections were analysed in the year of 1997 in these installations, taking into account the principal administrative and operational aspects. With the objective to have a final evaluation of the installation, it was given a value of each item of the inspection report, related of its importance. Finally, the values have been added and it had obtained a final evaluation, which has a range from 0 to 10 (poor or excellent). (author)

  16. 1995 mask industry quality assessment

    Science.gov (United States)

    Bishop, Chris; Strott, Al

    1995-12-01

    The third annual mask industry assessment will again survey various industry companies for key performance measurements in the areas of quality and delivery. This year's assessment is enhanced to include the area of safety and further breakdown of the data into 5-inch vs. 6- inch. The data compiled includes shipments, customer return rate, customer return reason, performance to schedule, plate survival yield, and throughput time (TPT) from 1988 through Q2, 1995. Contributor identities remain protected by utilizing Arthur Andersen & Company to ensure participant confidentiality. Participation in the past included representation of over 75% of the total merchant and captive mask volume in the United States. This year's assessment is expected to result in expanded participation by again inviting all mask suppliers domestically to participate as well as an impact from inviting international suppliers to participate.

  17. The development of coke smelting and the industrial revolution

    OpenAIRE

    Macfarlane, Alan

    2004-01-01

    Abraham Darby and the origins of the industrial revolution in Britain. Alan Macfarlane talks to John about the reasons for the area near Birmingham becoming the epi-centre of the industrial development, and the development of coke furnaces and iron smelting.

  18. Nuclear industry and territories

    International Nuclear Information System (INIS)

    Le Ngoc, B.

    2016-01-01

    Nuclear industry being composed of plants, laboratories, nuclear power stations, uranium mines, power lines and fluxes of materials from one facility to another is a strong shaper of the national territory. Contrary to other European countries, French nuclear industry is present all over the national territory. In 64 departments out of 101 there is at least one enterprise whose half of the revenues depends on nuclear activities. The advantage of such a geographical dispersion is when a nuclear activity is given up the social impact is less important: people tend to find a new job in the same region. French Nuclear power plants are generally set in remote places where population density is low and being the first employer by far of the area and being a major contributor to the city revenues, they are perceived as a key element the local population is proud of. In Germany, nuclear power plants are set inside dense industrial regions and appear as an industry just like any other.(A.C.)

  19. 23rd International Conference on Industrial Engineering and Engineering Management 2016

    CERN Document Server

    Shen, Jiang; Dou, Runliang

    2017-01-01

    International Conference on Industrial Engineering and Engineering Management is sponsored by Chinese Industrial Engineering Institution, CMES, which is the unique national-level academic society of Industrial Engineering. The conference is held annually as the major event in this area. Being the largest and the most authoritative international academic conference held in China, it supplies an academic platform for the experts and the entrepreneurs in International Industrial Engineering and Management area to exchange their research results. Many experts in various fields from China and foreign countries gather together in the conference to review, exchange, summarize and promote their achievements in Industrial Engineering and Engineering Management fields. Some experts pay special attention to the current situation of the related techniques application in China as well as their future prospect, such as Industry 4.0, Green Product Design, Quality Control and Management, Supply Chain and logistics Management...

  20. Industrial Assessment of Creative Persons and Work Environments.

    Science.gov (United States)

    Lifton, Peter D.

    While personality psychology has a definite contribution to make to the study of industrial psychology and organizational behavior, it is a contribution with parameters, limitations, and areas of expertise which need to be better defined. Many industrial/organizational (I/O) psychologists are skeptical of the utility of personality measures for…

  1. High safety in the mining industry

    Energy Technology Data Exchange (ETDEWEB)

    1987-08-01

    Presents an interview in question and answer format with the deputy chairman of Gosgortekhnadzor (Committee for Supervision of Industrial Work Safety and Mining Supervision) in which he discusses two recent fatal accidents in the Yasinovskaya-Glubokaya and Chaikino coal mines and identifies areas where safety needs to be improved (more automation, protective devices, ventilation etc.). Discusses the particular problems involved with deep mining (20% of mines are now deeper than 700 m and 27 mines are deeper than 1000 m), such as fires, dust, methane, rock falls, insufficient maintenance and strata control and poor ventilation. Confirms that a large number of accidents is due to poor organization and stresses the fact the coal industry must be subjected to perestroika (restructuring) as much as other areas of society.

  2. The CEA-Industrie Group of Companies

    International Nuclear Information System (INIS)

    1988-01-01

    The 1988 financial and technological status of the CEA-Industry Group of Companies is summarized. The activities, technological innovations, and areas of development perspectives of the CEA-Industry Group of Companies, chiefly concentrated in fields relating to nuclear energy, are described. The principal business sectors of the group involve nuclear fuel cycle, nuclear plants and maintenance, computer applications and life science. Some activities of the group are extended to management, construction and financial fields

  3. Uncertainty in the Sphere of the Industry 4.0 – Potential Areas to Research

    OpenAIRE

    Andrzej Magruk

    2016-01-01

    The world stands on the threshold of a new age of technology, which will launch a fourth industrial revolution (Industry 4.0). According to this idea, web-based network will support smart factories at every stage of the work on the product, from design through to servicing and recycling. It is a vision of a world in which the real environment connects to the digital one using follows driving forces: Internet of things, cloud computing, big data, cyber-physical systems, and others. The Industr...

  4. Harnessing the potential - Atlantic Canada's oil and gas industry : Newfoundland Ocean Industries special releases or publications

    International Nuclear Information System (INIS)

    1998-07-01

    A comprehensive overview of Atlantic Canada's oil and gas industry is presented, demonstrating the importance of oil and gas resources and their related industries to Atlantic Canada. The objective of the report is to provide a basis for a strategy to optimize opportunities within the region from the oil and gas sector. The report reviews the current status of the industry, including the region's resource potential and the oil and gas developments currently underway. The evolution of the oil and gas industry is discussed in terms of value chain components. A broad assessment of the region's supply, labour force, infrastructure, training, and research and development capabilities is presented, followed by a description of the industry's potential, its regulatory framework and the barriers and constraints affecting industry development. Appendices contain a chronological history of major events in Atlantic Canada's oil and gas industry (Appendix A); and overview of the Atlantic Accord and the Canada-Nova Scotia Accord's equalization offset provisions (Appendix B); a value chain matrix, detailing some 60 categories of industry requirements and a capsule assessment of the region's ability to meet them (Appendix C); and a listing of research and development institutions in Atlantic Canada, including their areas of specialization (Appendix D)

  5. Ecological geochemical assessment and source identification of trace elements in atmospheric deposition of an emerging industrial area: Beibu Gulf economic zone.

    Science.gov (United States)

    Zhong, Cong; Yang, Zhongfang; Jiang, Wei; Hu, Baoqing; Hou, Qingye; Yu, Tao; Li, Jie

    2016-12-15

    Industrialization and urbanization have led to a deterioration in air quality and provoked some serious environmental concerns. Fifty-four samples of atmospheric deposition were collected from an emerging industrial area and analyzed to determine the concentrations of 11 trace elements (As, Cd, Cu, Fe, Hg, Mn, Mo, Pb, Se, S and Zn). Multivariate geostatistical analyses were conducted to determine the spatial distribution, possible sources and enrichment degrees of trace elements in atmospheric deposition. Results indicate that As, Fe and Mo mainly originated from soil, their natural parent materials, while the remaining trace elements were strongly influenced by anthropogenic or natural activities, such as coal combustion in coal-fired power plants (Pb, Se and S), manganese ore (Mn, Cd and Hg) and metal smelting (Cu and Zn). The results of ecological geochemical assessment indicate that Cd, Pb and Zn are the elements of priority concern, followed by Mn and Cu, and other heavy metals, which represent little threat to local environment. It was determine that the resuspension of soil particles impacted the behavior of heavy metals by 55.3%; the impact of the coal-fired power plants was 18.9%; and the contribution of the local manganese industry was 9.6%. The comparison of consequences from various statistical methods (principal component analysis (PCA), cluster analysis (CA), enrichment factor (EF) and absolute principle component score (APCS)-multiple linear regression (MLR)) confirmed the credibility of this research. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. RETRAINING BY PRIVATE INDUSTRY.

    Science.gov (United States)

    HOOS, IDA R.

    SEVERAL SAN FRANCISCO BAY AREA COMPANIES WERE EXAMINED FOR SPECIFIC PROGRAMS FOR DISPLACED EMPLOYEES. ARMOUR AND COMPANY SOUGHT TO GUIDE DISPLACED EMPLOYEES TO CLASSES OR COURSES OF ACTION OUTSIDE ITS OWN SPHERE OF OPERATION. LOCKHEED HAS PROVIDED UNUSUALLY WELL FOR UPGRADING AND RETRAINING, MAINLY BECAUSE OF INDUSTRY FLUCTUATIONS AND RAPID…

  7. Impacts of cement industries on environment and control measure

    International Nuclear Information System (INIS)

    Hashmi, H.N.; Malik, H.N.; Naushad, Z.

    2005-01-01

    Utilization of cement as building material is gaining more importance. Cement industries around the world are contributing in global and as well as local pollution. In Pakistan most of the cement industries are constructed in remote areas without any proper environmental impact assessment. Unawareness of peoples toward sustainable environment and due to lack of job opportunities, dwellers are demanding employment rather than clean environment from title-holder of the industry. Air pollution caused by cement industries is harmful to the human's health, spoils and erodes building surface, corrodes metals, weakens textiles, deteriorates atmospheric visibility, affects plant life and leads to ecological imbalances. To investigate environmental impact of cement industries in Pakistan, environmental conditions around and inside the five cement industries in the vicinity of Taxila city are studied. To inspect the whole scenario, air pollution control devices in these industries were also examined in detail. These industries are using Electrostatic Precipitators and Baghouses to control air pollution (dust particulates). Proper caring of these equipment is necessary for better results. Detailed study shows that emissions from their stacks and dust particulates are causing problems. Health consultants in study area are much worry about the health of workers and environmental degradation in the vicinity of these industries. The comparison of air pollution control devices shows that Baghouses are environmental friendly. Considering the field conditions it is also concluded that involvement of government and environmental pollution control agencies is much more necessary. (author)

  8. Groundwater Molybdenum from Emerging Industries in Taiwan.

    Science.gov (United States)

    Tsai, Kuo-Sheng; Chang, Yu-Min; Kao, Jimmy C M; Lin, Kae-Long

    2016-01-01

    This study determined the influence of emerging industries development on molybdenum (Mo) groundwater contamination. A total of 537 groundwater samples were collected for Mo determination, including 295 samples from potentially contaminated areas of 3 industrial parks in Taiwan and 242 samples from non-potentially contaminated areas during 2008-2014. Most of the high Mo samples are located downstream from a thin film transistor-liquid crystal display (TFT-LCD) panel factory. Mean groundwater Mo concentrations from potentially contaminated areas (0.0058 mg/L) were significantly higher (p industry and following wastewater batch treatment were 0.788 and 0.0326 mg/L, respectively. This indicates that wastewater containing Mo is a possible source of both groundwater and surface water contamination. Nine samples of groundwater exceed the World Health Organization's suggested drinking water guideline of 0.07 mg/L. A non-carcinogenic risk assessment for Mo in adults and children using the Mo concentration of 0.07 mg/L yielded risks of 0.546 and 0.215, respectively. These results indicate the importance of the development of a national drinking water quality standard for Mo in Taiwan to ensure safe groundwater for use. According to the human health risk calculation, the groundwater Mo standard is suggested as 0.07 mg/L. Reduction the discharge of Mo-contaminated wastewater from factories in the industrial parks is also the important task in the future.

  9. Impact of Industrial Effluents on Water Quality of Streams in Nakawa ...

    African Journals Online (AJOL)

    Impact of Industrial Effluents on Water Quality of Streams in Nakawa-Ntinda, Uganda. ... Journal of Applied Sciences and Environmental Management ... physicochemical parameters of streams that receive effluents from different categories of industries in Nakawa -Ntinda industrial area of Kampala. the stream water quality ...

  10. Wastewater quality control at Sarnia (Ontario, Canada) petrochemical industries

    Energy Technology Data Exchange (ETDEWEB)

    Vianna, Arlinda C [Servico Nacional de Aprendizagem Industrial (SENAI), Salvador, BA (Brazil); Souza, Eliane S; Himmelman, William [Lambton College, Sarnia, ON (Canada)

    1994-12-31

    Ontario industries are required by law to meet strict regulations under the provinces under MISA initiative (Municipal-Industrial Strategy for Abatement). The petroleum-petrochemical area was selected as a leader in the development of new environmental objectives, and monitoring and training programs. Sarnia has become a world leader in industrial environmental control systems and the approach toward zero emissions. 4 refs., 6 figs., 2 tabs.

  11. Wastewater quality control at Sarnia (Ontario, Canada) petrochemical industries

    Energy Technology Data Exchange (ETDEWEB)

    Vianna, Arlinda C. [Servico Nacional de Aprendizagem Industrial (SENAI), Salvador, BA (Brazil); Souza, Eliane S.; Himmelman, William [Lambton College, Sarnia, ON (Canada)

    1993-12-31

    Ontario industries are required by law to meet strict regulations under the provinces under MISA initiative (Municipal-Industrial Strategy for Abatement). The petroleum-petrochemical area was selected as a leader in the development of new environmental objectives, and monitoring and training programs. Sarnia has become a world leader in industrial environmental control systems and the approach toward zero emissions. 4 refs., 6 figs., 2 tabs.

  12. Planning of Low-rise Urban Housing Areas

    DEFF Research Database (Denmark)

    Svensson, O.

    In many countries industrialization of house building has led to the building of large, monotonous housing areas with high-rise construction. In Denmark, however, smaller, varied housing areas with low-rise construction and urban features have become predominant. This report contains guidelines...... for the planning of such housing areas....

  13. Job-housing imbalance and commuting of coastal industrial town in Liaoning province, China

    Science.gov (United States)

    Chen, Fei; Lu, Wei; Cai, Jun; Yang, Qiyao

    2017-11-01

    During the Twelve Five period, China promulgated industrial policies promote the energy-intensive industries relocate to coastal areas in order to utilize marine shipping resources. Consequently, some major state-owned steel and petrochemical enterprises have relocated and resulted in a large scale coastal area development. Restricted by the port construction, most of the coastal industrial areas are located in the outer suburbs. To balance between employment and housing, new industrial coastal towns were constructed. In this paper, we adopt a case-study approach to analysis some typical industrial coastal towns of Liaoning Province situated in the Bohai Bay, which is currently under rapid economic growth. Our investigations reflect the common phenomenon of long distance commuting and massive amount of vacant residences. More specifically, large plant relocation caused hundreds of kilometers of daily commute and enterprises had to provide housing subsidies and education incentives to motivate employees to relocate to coastal areas. Nonetheless, many employees still refuse to relocate due to job stability, diverse needs of family members and access to convenient services. These employees averaged 4 hours of commute daily and some who lived further had to reside in temporary industrial housing units and subject to long-term family separation. As a result, only a small portion of employees purchase new coastal residences but mostly for investment and retirement purposes, leading to massive vacancy and ghost-town phenomenon. In contrast to the low demand, coastal areas tend to develop large amount of residences prior to industrial relocation, which may be directly related to local government finances. Some local governments have sold residential land to developers to general revenue to support the subsequent industrial development. Subject to the strong preference of ocean- view, residential housing developers tend to select coast-line land to construct new residential

  14. Canada's upstream petroleum industry : 1997 perspective

    International Nuclear Information System (INIS)

    1997-06-01

    A review of the trends and activities in the upstream petroleum industry during 1996 were presented, emphasizing the significance of the industry' contribution to Canada's economy. Among the areas included were highlights of Canada's hydrocarbon reserves, conventional production, frontier production, and non-conventional (oil sands) production. New market opportunities and activities in the pipeline transportation sector were also discussed. Environmental issues including health and safety received due attention. In this regard, the industry's efforts to work with government and other stakeholders to ensure that requirements for land use are balanced with the need to protect wilderness and wildlife habitat, received special mention. 16 figs

  15. The international electronics industry.

    Science.gov (United States)

    LaDou, J; Rohm, T

    1998-01-01

    High-technology microelectronics has a major presence in countries such as China, India, Indonesia, and Malaysia, now the third-largest manufacturer of semiconductor chips. The migration of European, Japanese, and American companies accommodates regional markets. Low wage rates and limited enforcement of environmental regulations in developing countries also serve as incentives for the dramatic global migration of this industry. The manufacture of microelectonics products is accompanied by a high incidence of occupational illnesses, which may reflect the widespread use of toxic materials. Metals, photoactive chemicals, solvents, acids, and toxic gases are used in a wide variety of combinations and workplace settings. The industry also presents problems of radiation exposure and various occupational stressors, including some unresolved ergonomic issues. The fast-paced changes of the technology underlying this industry, as well as the stringent security precautions, have added to the difficulty of instituting proper health and safety measures. Epidemiologic studies reveal an alarming increase in spontaneous abortions among cleanroom manufacturing workers; no definitive study has yet identified its cause. Other health issues, including occupational cancer, are yet to be studied. The microelectronics industry is a good example of an industry that is exported to many areas of the world before health and safety problems are properly addressed and resolved.

  16. On industrial application of structural reliability theory

    International Nuclear Information System (INIS)

    Thoft-Christensen, P.

    1998-01-01

    In this paper it is shown that modern structural reliability theory is being successfully applied to a number of different industries. This review of papers is in no way complete. In the literature there is a large number of similar applications and also application not touched on in this presentation. There has been some concern among scientists from this area that structural reliability theory is not being used by industry. It is probably correct that structural reliability theory is not being used by industry as much as it should be used. However, the work by the ESReDA Working Group clearly shows the vary wide application of structural reliability theory by many different industries. One must also have in mind that industry often is reluctant to publish data related to safety and reliability. (au)

  17. Beneficial use of industrial by-products for phytoremediation of an arsenic-rich soil from a gold mining area.

    Science.gov (United States)

    Lopes, G; Ferreira, P A A; Pereira, F G; Curi, N; Rangel, W M; Guilherme, L R G

    2016-08-02

    This study investigated two industrial by-products - red mud (RM) and its mixture with phosphogypsum (RMG), as amendments in an As((5+))-contaminated soil from a gold mining area in Brazil in order to grow three plant species: Brachiaria decumbens, Crotalaria spectabilis, and Stylosanthes cv. Campo Grande. These amendments were applied to reach a soil pH of 6.0. Using RM and RMG increased shoot dry matter (SDM) and root dry matter (RDM) of most plants, with RMG being more effective. Adding RMG increased the SDM of Brachiaria and Crotalaria by 18 and 25% and the RDM by 25 and 12%, respectively. Stylosanthes was sensitive to As toxicity and grew poorly in all treatments. Arsenic concentration in shoots of Brachiaria and Crotalaria decreased by 26% with the use of RMG while As in roots reduced by 11 and 30%, respectively. Also, the activities of the plant oxidative stress enzymes varied following treatments with the by-products. The plants grew in the As-contaminated soil from the gold mining area. Thus, they might be employed for phytoremediation purposes, especially with the use of RMG due to its potential advantage in terms of nutrient supply (Ca(2+) and SO4(2-) from phosphogypsum).

  18. Mechatronics ideas for industrial application

    CERN Document Server

    Szewczyk, Roman; Trojnacki, Maciej; Kaliczyńska, Małgorzata

    2015-01-01

    This book presents recent advances and developments in control, automation, robotics, and measuring techniques. It presents contributions of top experts in the fields, focused on both theory and industrial practice. The particular chapters present a deep analysis of a specific technical problem which is in general followed by a numerical analysis and simulation, and results of an implementation for the solution of a real world problem. The presented theoretical results, practical solutions and guidelines will be useful for both researchers working in the area of engineering sciences and for practitioners solving industrial problems.  

  19. 2010 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Klamath Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  20. 2011 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Burns Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  1. 2010 Oregon Department of Geology and Mineral Industries (DOGAMI) Lidar: Newberry Study Area

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The Oregon Department of Geology & Mineral Industries (DOGAMI) contracted with Watershed Sciences, Inc. to collect high resolution topographic LiDAR data for...

  2. Cloud residues and interstitial aerosols from non-precipitating clouds over an industrial and urban area in northern China

    Science.gov (United States)

    Li, Weijun; Li, Peiren; Sun, Guode; Zhou, Shengzhen; Yuan, Qi; Wang, Wenxing

    2011-05-01

    Most studies of aerosol-cloud interactions have been conducted in remote locations; few have investigated the characterization of cloud condensation nuclei (CCN) over highly polluted urban and industrial areas. The present work, based on samples collected at Mt. Tai, a site in northern China affected by nearby urban and industrial air pollutant emissions, illuminates CCN properties in a polluted atmosphere. High-resolution transmission electron microscopy (TEM) was used to obtain the size, composition, and mixing state of individual cloud residues and interstitial aerosols. Most of the cloud residues displayed distinct rims which were found to consist of soluble organic matter (OM). Nearly all (91.7%) cloud residues were attributed to sulfate-related salts (the remainder was mostly coarse crustal dust particles with nitrate coatings). Half the salt particles were internally mixed with two or more refractory particles (e.g., soot, fly ash, crustal dust, CaSO 4, and OM). A comparison between cloud residues and interstitial particles shows that the former contained more salts and were of larger particle size than the latter. In addition, a somewhat high number scavenging ratio of 0.54 was observed during cloud formation. Therefore, the mixtures of salts with OMs account for most of the cloud-nucleating ability of the entire aerosol population in the polluted air of northern China. We advocate that both size and composition - the two influential, controlling factors for aerosol activation - should be built into all regional climate models of China.

  3. Natural gas as raw material for industrial development

    International Nuclear Information System (INIS)

    Kvisle, Steinar

    2006-01-01

    Industrial development based on natural gas has broad, industrial implications. Norway has a vital industry based on natural gas as raw material, here under Ormen Lange, Snoehvit LNG, Tjeldbergodden and Petrochemical Grenland. The petrochemical industry has challenges, e.g. the cost of raw materials and energy, localization related to the markets, and recruitment, but considerable investments are made in the sector. The Northern areas in Norway may have special challenges related to bringing the product to the market. Solutions to this challenge are in LNG (liquid natural gas), GTL (gas to liquids), and GTO (gas to olefins)

  4. Minerals Yearbook, volume II, Area Reports—Domestic

    Science.gov (United States)

    ,

    2018-01-01

    The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

  5. Minerals Yearbook, volume III, Area Reports—International

    Science.gov (United States)

    ,

    2018-01-01

    The U.S. Geological Survey (USGS) Minerals Yearbook discusses the performance of the worldwide minerals and materials industries and provides background information to assist in interpreting that performance. Content of the individual Minerals Yearbook volumes follows:Volume I, Metals and Minerals, contains chapters about virtually all metallic and industrial mineral commodities important to the U.S. economy. Chapters on survey methods, summary statistics for domestic nonfuel minerals, and trends in mining and quarrying in the metals and industrial mineral industries in the United States are also included.Volume II, Area Reports: Domestic, contains a chapter on the mineral industry of each of the 50 States and Puerto Rico and the Administered Islands. This volume also has chapters on survey methods and summary statistics of domestic nonfuel minerals.Volume III, Area Reports: International, is published as four separate reports. These regional reports contain the latest available minerals data on more than 180 foreign countries and discuss the importance of minerals to the economies of these nations and the United States. Each report begins with an overview of the region’s mineral industries during the year. It continues with individual country chapters that examine the mining, refining, processing, and use of minerals in each country of the region and how each country’s mineral industry relates to U.S. industry. Most chapters include production tables and industry structure tables, information about Government policies and programs that affect the country’s mineral industry, and an outlook section.The USGS continually strives to improve the value of its publications to users. Constructive comments and suggestions by readers of the Minerals Yearbook are welcomed.

  6. To study the concentration of natural radionuclides (uranium, thorium) and certain toxic trace elements (arsenic, mercury, antimony, lead) in hair of persons living in industrial and agricultural areas of Byelorussia. Part of a coordinated programme on nuclear methods in health-treated monitoring of trace element pollutants

    International Nuclear Information System (INIS)

    Malenchenko, A.

    1983-03-01

    Hair samples were collected from male and female donors living in selected industrial or agricultural areas of Byelorussia. Samples were analysed by INAA for As, Hg, Pb and Sb, while Th and U were determined by the solid track detector (STD) method. Overall, concentrations of the elements monitored were low with the exception of Pb for which relatively high concentrations were observed in industrial areas. No significant differences in the concentrations of the elements surveyed were observed between industrial and agricultural areas nor between male and female donors

  7. Interfacing industrial process control systems to LEP/LHC

    International Nuclear Information System (INIS)

    Rabany, M.

    1992-01-01

    Modern industrial process control systems have developed to meet the needs of industry to increase the production while decreasing the costs. Although particle accelerators designers have pioneered in control systems during the seventies, it has now become possible to them to profit of industrial solutions in substitution of, or in complement with the more traditional home made ones. Adapting and integrating such industrial systems to the accelerator control area will certainly benefit to the field in terms of finance, human resources and technical facilities offered off-the-shelf by the widely experienced industrial controls community; however this cannot be done without slightly affecting the overall accelerator control architecture. The paper briefly describes the industrial controls arena and takes example on an industrial process control system recently installed at CERN to discuss in detail the related choices and issues. (author)

  8. Sustainable Industrialization in the Building Industry: On the Road to Energy Efficient Construction Management

    DEFF Research Database (Denmark)

    Wandahl, Søren; Ussing, Lene Faber

    2013-01-01

    Since the Brundtland report in 1987, sustainability has been an issue in all parts of the world, and the focus is increasing in these years. In the same period, the building industry has in the same period also been under heavy pressure to increase productivity in the same pace as other manufactu......Since the Brundtland report in 1987, sustainability has been an issue in all parts of the world, and the focus is increasing in these years. In the same period, the building industry has in the same period also been under heavy pressure to increase productivity in the same pace as other...... manufacturing industries. An important question, then, is how well these two highly relevant areas can go hand in hand. By means of comparing the main ideas and drivers behind sustainability and industrialization, respectively, common threads, possible synergies and evident barriers are put forward...... in this discussion paper. The main method is a review to track past merits in the two domains and to detect knowledge gaps that have research potential. A strategic research agenda focusing on energy-efficient construction management is outlined showing the need for future focus on combining industrialization...

  9. The Impact of Clustering on the Innovativeness Of Furniture Industry

    Directory of Open Access Journals (Sweden)

    Grzegorzewska Emilia

    2014-06-01

    Full Text Available The furniture industry in Poland is a rapidly growing area of the economy. The level of innovation strongly influences furniture enterprises competitive position on the market. To support innovation, small and medium furniture industry businesses are affiliate in cluster initiatives. It supports the area of R&D, joint promotional campaigns and financing of new ventures. The paper presents selected furniture industry cluster initiatives that implement policies to support innovation activities of enterprises affiliated to them. In Poland, more and more furniture industry businesses brings together in cluster initiatives that aim to improve their market competitiveness and increase the level of innovation. Taken studies allow to analyse the direction of innovative activities undertaken by companies of the furniture industry with particular emphasis on the ones associated in clusters. Thus the aim of the article is to investigate the interest of Polish furniture enterprises (especially SMEs, in participation in clusters. Moreover the benefits of that choice and its impact on Polish furniture manufacturers innovativeness are evaluated.

  10. Can industry afford solar energy

    Science.gov (United States)

    Kreith, F.; Bezdek, R.

    1983-03-01

    Falling oil prices and conservation measures have reduced the economic impetus to develop new energy sources, thus decreasing the urgency for bringing solar conversion technologies to commercial readiness at an early date. However, the capability for solar to deliver thermal energy for industrial uses is proven. A year-round operation would be three times as effective as home heating, which is necessary only part of the year. Flat plate, parabolic trough, and solar tower power plant demonstration projects, though uneconomically operated, have revealed engineering factors necessary for successful use of solar-derived heat for industrial applications. Areas of concern have been categorized as technology comparisons, load temperatures, plant size, location, end-use, backup requirements, and storage costs. Tax incentives have, however, supported home heating and not industrial uses, and government subsidies have historically gone to conventional energy sources. Tax credit programs which could lead to a 20% market penetration by solar energy in the industrial sector by the year 2000 are presented.

  11. Is Intra-Industry Trade Specialization a Precondition to Business Cycle Synchronization When Joining the Euro Area? The Case of Poland

    Directory of Open Access Journals (Sweden)

    Kawecka-Wyrzykowska Elżbieta

    2017-12-01

    Full Text Available The first objective of this paper is to present theoretical approaches to the impact of trade growth (induced by monetary integration on business cycle synchronization which is an important factor of a country’s readiness for a currency union accession. The main conclusion from the first part of the analysis is that business cycle convergence and the cost of the lack of an autonomous monetary policy depend on intra-industry trade (IIT intensity rather than on general trade growth. The second objective is to assess - using the IIT index as a measure of business cycle synchronization (and of susceptibility to asymmetric shocks transmitted mostly through trade channels - preparedness of the Polish economy to the euro adoption. Calculations reveal that the IIT intensity in Poland is already relatively high (in particular in relations with the euro area members and continues to rise. This confirms the increasing complementarity of Poland’s economy with the economic structures of the euro area partners which reduces the probability of asymmetric shocks.

  12. Prospects for geothermal commercialization in the greenhouse industry

    Energy Technology Data Exchange (ETDEWEB)

    Bressler, S.E.; Hanemann, W.M.

    1980-03-01

    A number of areas considered directly relevant to a particular greenhouse firm's decision to use or not to use geothermal energy for its commercial needs are emphasized. These areas include: current fuel uses and problems, and future fuel concerns; firm decision-making processes, including managerial and financing conventions; perceived commercial potential for geothermal energy in the industry; the potential institutional framework for user involvement in geothermal development; and the role that government might most effectively play in stimulating user development. The results are based upon extensive personal interviews with decision-makers in the industry. (MHR)

  13. Source apportionment of VOCs and the contribution to photochemical ozone formation during summer in the typical industrial area in the Yangtze River Delta, China

    Science.gov (United States)

    Shao, Ping; An, Junlin; Xin, Jinyuan; Wu, Fangkun; Wang, Junxiu; Ji, Dongsheng; Wang, Yuesi

    2016-07-01

    Volatile organic compounds (VOCs) were continuously observated in a northern suburb of Nanjing, a typical industrial area in the Yangtze River Delta, in a summer observation period from 15th May to 31st August 2013. The average concentration of total VOCs was (34.40 ± 25.20) ppbv, including alkanes (14.98 ± 12.72) ppbv, alkenes (7.35 ± 5.93) ppbv, aromatics (9.06 ± 6.64) ppbv and alkynes (3.02 ± 2.01) ppbv, respectively. Source apportionment via Positive Matrix Factorization was conducted, and six major sources of VOCs were identified. The industry-related sources, including industrial emissions and industrial solvent usage, occupied the highest proportion, accounting for about 51.26% of the VOCs. Vehicular emissions occupied the second highest proportion, accounting for about 34.08%. The rest accounted for about 14.66%, including vegetation emission and liquefied petroleum gas/natural gas usage. Contributions of VOCs to photochemical O3 formation were evaluated by the application of a detailed chemical mechanism model (NCAR MM). Alkenes were the dominant contributors to the O3 photochemical production, followed by aromatics and alkanes. Alkynes had a very small impact on photochemical O3 formation. Based on the outcomes of the source apportionment, a sensitivity analysis of relative O3 reduction efficiency (RORE), under different source removal regimes such as using the reduction of VOCs from 10% to 100% as input, was conducted. The RORE was the highest (~ 20%-40%) when the VOCs from solvent-related sources decreased by 40%. The highest RORE values for vegetation emissions, industrial emissions, vehicle exhaust, and LPG/NG usage were presented in the scenarios of 50%, 80%, 40% and 40%, respectively.

  14. Land transportation model for supply chain manufacturing industries

    Science.gov (United States)

    Kurniawan, Fajar

    2017-12-01

    Supply chain is a system that integrates production, inventory, distribution and information processes for increasing productivity and minimize costs. Transportation is an important part of the supply chain system, especially for supporting the material distribution process, work in process products and final products. In fact, Jakarta as the distribution center of manufacturing industries for the industrial area. Transportation system has a large influences on the implementation of supply chain process efficiency. The main problem faced in Jakarta is traffic jam that will affect on the time of distribution. Based on the system dynamic model, there are several scenarios that can provide solutions to minimize timing of distribution that will effect on the cost such as the construction of ports approaching industrial areas other than Tanjung Priok, widening road facilities, development of railways system, and the development of distribution center.

  15. Methodology of teaching and new challenges in the training of professionals in the area of industrial radiology

    International Nuclear Information System (INIS)

    Lima, C.M. Araujo; Pelegrineli, S.Q.; Lima, A.R.

    2017-01-01

    One of the main causes of radiological accidents is the lack of knowledge in radiological protection of workers. In order to meet the needs of professionals in radiology techniques in training in industrial radiology and radiological protection, the Training Course in Industrial Radiology was created in 2009 by MAXIM, in partnership with the Casa Branca Faculty. The objective is to present the structure and methodology of teaching used in this course to reach the objectives of training professionals with solid knowledge in industrial radiology, as well as to mention the challenges of this training. For the elaboration of the study, a statistical data base and theoretical analysis of the teaching structure of the course was used. Professional training in industrial radiology is subdivided into basic, specific, practical and complementary modules, totaling a workload of 360 hours. It is noted that most of the professionals trained come from the great urban centers of the country, favoring employability in the port terminals and industries that are located in these regions. It is concluded, therefore, that it is necessary and of great importance for the growing industrial market, the formation of new professionals, mainly in cities of the interior

  16. Galvanizing industry: evaluation of exposure levels using biomonitors

    International Nuclear Information System (INIS)

    Menezes, Maria Angela de B.C.; Sabino, Claudia de V.S.; Amaral, Angela Maria; Mattos, Silvania V. de M.; S. Filho, Serafim; Maia, Elene Cristina P.

    1999-01-01

    In Brazil, statistical surveys concerning occupational diseases refer to accidents and damages. The surveys do not refer to the occupational diseases developed through long exposures to hazardous work conditions, involving physical risk and toxic chemical substances. The Program of Medical Control of Occupational Health determines the Maximum Biological Levels Allowed and the Values of Normality References. But concerning metal and toxic inorganic, values of only few elements are established. In Belo Horizonte and surroundings areas, which is an important industrial centre in the country, there are different industries distributed over various areas. There are about 80 galvanizing industries which are responsible for the majority of the metal contamination hospitalities. A preliminary sampling was performed in order to conduct a survey of the exposures to elements related to occupational diseases in galvanizing industry. The preliminary results for toxic and non-toxic elements obtained using hair and fingernails as biomonitors are shown. The K 0 parametric neutron activation analysis method was applied and the elements determined were: Ag, Al, Au, Cl, Co, Cr, Cu, Fe, I, Mn, Na, Ti, V, Ta, and Zn. (author)

  17. Process industry properties in nuclear industry

    International Nuclear Information System (INIS)

    Zheng Hualing

    2005-01-01

    In this article the writer has described the definition of process industry, expounded the fact classifying nuclear industry as process industry, compared the differences between process industry and discrete industry, analysed process industry properties in nuclear industry and their important impact, and proposed enhancing research work on regularity of process industry in nuclear industry. (authors)

  18. Biometrics and smart card based applications for nuclear industry

    International Nuclear Information System (INIS)

    Nishanth Reddy, J.; Dheeraj Reddy, J.; Narender Reddy, J.

    2004-01-01

    Biometrics has emerged as a convenient, foolproof and well-accepted technology for identification around the globe. Nucleonix has developed innovative solutions based on finger scan biometrics for various industries. This paper closely looks into the application areas for the nuclear industry and how it will benefit this industry, in terms of identification, access control, security of PCs and applications, attendance, machinery usage control and other custom applications. (author)

  19. Different immunomodulatory effects associated with sub-micrometer particles in ambient air from rural, urban and industrial areas

    International Nuclear Information System (INIS)

    Wichmann, Gunnar; Franck, Ulrich; Herbarth, Olf; Rehwagen, Martina; Dietz, Andreas; Massolo, Laura; Ronco, Alicia; Mueller, Andrea

    2009-01-01

    Immunomodulatory effects of chemicals adsorbed to particles with aerodynamic diameter below 0.49 μm (PM 0.5 ) collected in winter 2001 at three sampling points (industrial area [LPIn], traffic-influenced urban area [LPCi], and control area [LPCo]) of La Plata, Argentina, were investigated. The sampling of particulate matter was carried out with high-volume collectors using cascade impactors. PM 0.5 -adsorbed compounds were hexane-extracted by accelerated solvent extraction. For immunological investigations, human peripheral blood lymphocytes were activated by phytohemagglutinin and exposed to dimethyl-sulfoxide dilutions of PM 0.5 -extracts for 24 h. Vitality/proliferation was quantified using MTT, released interferon-γ (IFN-γ) and interleukin-4 (IL-4) by ELISA. Cytokine production but not vitality/proliferation was significantly suppressed by all of the highest extract concentrations. Generally, suppression of IFN-γ by PM 0.5 -extracts was stronger than those of IL-4. Based on administered mass of PM 0.5 , all extracts suppressed IFN-γ production nearly uniform. Contrary, LPCi-extracts exerted maximum IFN-γ suppression based either on air volume or regarding PM 0.5 -adsorbed PAH. Also the ranking of PM 0.5 -associated effects on IL-4 production differs in dependence of the chosen reference points, either mass or [μg/ml] or air volume [m 3 /ml] related dust quantities in cell culture. Based on the corresponding air volume, LPCi-extracts inhibited IL-4 production to the maximum extend, whereas suppression of IL-4 was comparable based on concentrations. This indicates that not only the disparate PM 0.5 -masses in air cause varying impacts, but also that disparities in PM 0.5 -adsorbed chemicals provoke different effects on immune responses and shifts in the regulatory balance that might have implications for allergy and cancer development

  20. Hyper accumulators of heavy metals of industrial areas of Islamabad and Rawalpindi

    International Nuclear Information System (INIS)

    Nazir, A.; Malik, R.N.; Ajaib, M.; Khan, N.; Siddiqui, M.F.

    2011-01-01

    Contamination of heavy metals is one of the major threats to water and soil as well as human health. Phytoremediation has been used to remediate metal-contaminated sites. This study evaluated the potential of 23 plant species growing on contaminated sites in Industrial areas of the Islamabad and Rawalpindi. Plant root, shoot and the soil samples were collected and analyzed for selected metal concentration values. To evaluate the potential of plant species for phyto remediation: Bioconcentration Factor (BCF), Biological Accumulation Coefficient (BAC) and Biological Transfer Coefficient (BCF) were calculated. The concentration of Pb in soils varied from 2-29 mg/kg, Zn from 28.82-172.56 mg/ kg, Cu from 8.88-306 mg/kg, respectively. The concentration of Pb in plant shoots varied from 1.0 to 39 mg/kg, Zn from 17.25 to 194.03 mg/kg, Cu from 0.65 to 171.83 mg/kg. The concentration of Pb in roots of plant varied 1-43 mg/kg, Zn from 3.34-116.16 mg/kg, Cu from 3.35- 416.89 mg/kg. Brachiaria raptans and Malvastrum coromandelianum were found most suitable for phyto stabilization of sites contaminated with Pb and Cu (BCF= 18 and 9.12). Considering the BAC values, 15 species for Pb, two species for Cu, five species for Zn possessed the characteristics of hyper accumulator, none of the plant species was found as hyper accumulator; however plants with high BCF (metal concentration ratio of plant root to soil) and low BTC (metal concentration ratio of plants shoots to roots) have the potential for phyto stabilization and phyto extraction. The results of this study can be used for management and decontamination of soils with heavy metals using plant species having phyto remediation potential/characteristics. (author)

  1. EVOLUTIONS IN GLOBAL AUTOMOBILES INDUSTRY

    Directory of Open Access Journals (Sweden)

    Viorel Pop

    2013-09-01

    Full Text Available This paper is a brief overview of the evolution of the global automotive industry during the 20th century, with reference to the main manufacturers, oil crises of 1970-1980, and also the global financial and economic crisis that began in 2008. The analyzed period covers the rise of the Asian Continent, beginning with Japan, then South Korea and more recently the emerging countries: China and India. What was predicted 20-25 years ago, became reality: Asia becomes the economic centre of the world, surpassing unexpectedly fast even the Euro-Atlantic area. Regarding Romania, the revival delay of the automobiles industry, led to the loss of the trucks and bus industry, and after a much awaited rehabilitation of car production, this has stuck now at an unsatisfactory level.

  2. INFLUENCE OF MINING AND METAL INDUSTRY ON PHYSCIA LICHENS

    Directory of Open Access Journals (Sweden)

    Kachinskaya V.V.

    2015-04-01

    Full Text Available The comparative analysis of lichens Physcia. Рopulation at different levels of aerotechnogenic pollution of industrial mining – metallurgical complex of Krivyi Rig Basin. In the highway area there was found the worsening living conditions of thallus at the lichens Physcia, manifested in the reduction of a projective cover and reducing of the size of thallus with the increasing of the degree of their damage. It is set that specific composition and conformities to law of distribution of cladinas is determined the type of the industrial loading. Predominance at the lichens of crustaceous cladinas, insignificant participation of fissile cladinas and complete absence of bushy forms is the possible consequence of industrial influence. We registered some 3 species of epiphytic lichens, namely Phaeophyscia nigricans, Physcia tenella, Physcia adscendens in a residential zone, while on conditional control area we found Physcia orbicularis. The dominant species was scum-like shape Phaeophyscia nigricans, Physcia adscendens, Physcia tenella, while on conditional control region we marked predominance of Physcia orbicularis and did not registered bushy lichens form. We also divided the lichens into two groups according to the resistance towards air pollution - moderate (2 species, Phaeophyscia nigricans, Physcia tenella and toxic-resistant (2 species, Physcia orbicularis, Physcia adscendens. Epiphytic lichens in terms of residential areas compared to conventionally control area characterized by a decrease of morphometric parameters of the melt. Key results can be used to predict the state of ecosystems using lichenoindication in terms of industrial regions of Ukraine.

  3. Safety- and risk analysis activities in other areas than the nuclear industry

    International Nuclear Information System (INIS)

    Kozine, I.; Duijm, N.J.; Lauridsen, K.

    2000-12-01

    The report gives an overview of the legislation within the European Union in the field of major industrial hazards and gives examples of decision criteria applied in a number of European countries when judging the acceptability of an activity. Furthermore, the report mentions a few methods used in the analysis of the safety of chemical installations. (au)

  4. On industrial application of structural reliability theory

    Energy Technology Data Exchange (ETDEWEB)

    Thoft-Christensen, P

    1998-06-01

    In this paper it is shown that modern structural reliability theory is being successfully applied to a number of different industries. This review of papers is in no way complete. In the literature there is a large number of similar applications and also application not touched on in this presentation. There has been some concern among scientists from this area that structural reliability theory is not being used by industry. It is probably correct that structural reliability theory is not being used by industry as much as it should be used. However, the work by the ESReDA Working Group clearly shows the vary wide application of structural reliability theory by many different industries. One must also have in mind that industry often is reluctant to publish data related to safety and reliability. (au) 32 refs.

  5. Impacts of Canada's uranium mining industry

    International Nuclear Information System (INIS)

    Holman, G.J.

    1982-05-01

    This study examines economic and environmental impacts of uranium mining in Canada and compares these impacts with those of other extractive and energy industries. The uranium industry generates taxes and royalties, income, employment, foreign exchange earnings, security of energy supply, and technological spinoffs. The indirect impacts of the industry as measured by employment and income multipliers are lower than those for other types of mining and comparable to oil and gas because of the high proportion of costs withdrawn from the economy in the form of taxes and operator margin. Social costs are primarily occupational hazards. Uranium mining probably has a lower non-health environmental impact than other mining industries due to much smaller throughputs and transportation requirements. Residents of the area surrounding the mine bear a disproportionate share of the social costs, while non-residents receive most of the benefits

  6. Comparative multielement analyses of airborne particulate samples collected in various areas

    International Nuclear Information System (INIS)

    Mamuro, Tetsuo; Matsuda, Yatsuka; Mizohata, Akira

    1973-01-01

    In order to grasp the characteristic features of the air pollution by particulates in various areas in Japan, multielement analyses by instrumental neutron activation analysis and radioisotope energy dispersive X-ray fluorescence analysis were applied to 31 airborne particulate samples collected in 15 different areas, and the analytical results obtained were compared with one another. All the samples were collected by so-called ''10 micron cut'' samplers, the collection efficiency of which is considered to be 50% at 8μ and nearly zero beyond 10μ. Among the areas in question there are clean seaside areas, heavily industrialized areas, small cities along the Inland Sea or the Pacific Ocean around which industrialization is progressing, a small city having only a big iron work, an area famous for its ceramic industry and so on. The atmospheres over them were found to be quite different not only in pollution extent but also in pollution pattern. (auth.)

  7. Efficient use of energy: investment practice in industry; Effiziente Energienutzung: Investitionspraxis in der Industrie

    Energy Technology Data Exchange (ETDEWEB)

    Kuster, J. [BHP - Brugger, Hanser und Partner AG, Zuerich (Switzerland); Zweiacker, J.-F. [Rapp AG Ingenieure und Planer, Biel (Switzerland); Rosch, M. [Consulting Verfahrenstechnik, Allschwil (Switzerland)

    2000-07-01

    This report for the Swiss Federal Office of Energy (SFOE) presents the results of a study made on drying processes used in industry and possible ways of promoting investment in measures to increase the efficient use of energy. The energy consumption of dehydration and drying processes used in industry is examined and the savings potential for these processes estimated. Examples of the processes investigated are given and figures for the energy consumption for dehydration and drying processes in several different industrial sectors are quoted. The report then examines, on the one hand, the factors that hem innovations in this area and, on the other, those that promote them. Further, the report looks into which reasons are responsible for the realisation or non-realisation of technically and economically viable solutions for improving the energy-efficiency of the dehydration and drying processes.

  8. Industrial technology transfer in Asia and the Pacific

    International Nuclear Information System (INIS)

    Fowler, E.E.

    1982-01-01

    For ten years the Regional Co-operative Agreement for research, development and training related to nuclear science and technology (RCA) has brought together work of the IAEA and Member States in Asia and the Pacific. Current RCA projects concern health care, food and agriculture, hydrology, and industry - areas of great importance to participating Member States. Each of the nine projects emphasizes the use of well-developed nuclear technologies to improve the standard of living in the region. Applied research and development in areas of common interest to RCA Member States are promoted through these co-operative projects. Successful results are shared among participants. The industrial project, funded by the UNDP and executed by the IAEA, aims to expand and accelerate the uses of isotopes and radiation technology in five fields of industrial application. The industrial project is currently the largest project under the RCA: almost all parties to the agreement participate. Planned expenditures for the seven-year project total about US $12 500 000 (including UNDP funds and Government contributions). Like other projects under the RCA, the industrial project will serve the pressing economic and social needs of the Asia and Pacific region. It can serve as a model to be followed by other regions of the world

  9. Application of Laplace transform to industrial problems

    International Nuclear Information System (INIS)

    Dubois, D.J.M.; Vagner, J.

    1989-01-01

    This paper presents two industrial applications of a new methodology based on Laplace transform properties which has been implemented in an industrial finite element program. In structures endowed with thermal and mechanical properties constant with the temperature, the stresses are computed for unit thermal shocks applied on the areas which are actually affected by the temperature variations. The analytical formulation and the general feature of this implementation are presented

  10. Characterization of Carbonyl Compounds in the Ambient Air of an Industrial City in Korea

    Directory of Open Access Journals (Sweden)

    Sung-Ok Baek

    2011-01-01

    Full Text Available The purpose of this study was to characterize spatial and temporal variations of carbonyl compounds in Gumi city, where a number of large electronic-industrial complexes are located. Carbonyl samples were collected at five sites in the Gumi area: three industrial, one commercial, and one residential area. Sampling was carried out throughout a year from December 2003 to November 2004. At one industrial site, samples were taken every six days, while those of the other sites were for seven consecutive days in every season. Each sample was collected for 150 minutes and at intervals of three times a day (morning, afternoon, and evening. A total of 476 samples were analyzed to determine 15 carbonyl compounds by the USEPA TO-11A (DNPH-cartridge/HPLC method. In general, acetaldehyde appeared to be the most abundant compound, followed by formaldehyde, and acetone+acrolein. Mean concentrations of acetaldehyde were two to three times higher in the industrial sites than in the other sites, with its maximum of 77.7 ppb. In contrast, ambient levels of formaldehyde did not show any significant difference between the industrial and non-industrial groups. Its concentrations peaked in summer probably due to the enhanced volatilization and photochemical reactivity. These results indicate significant emission sources of acetaldehyde in the Gumi industrial complexes. Mean concentrations of organic solvents (such as acetone+acrolein and methyl ethyl ketone were also significantly high in industrial areas. In conclusion, major sources of carbonyl compounds, including acetaldehyde, are strongly associated with industrial activities in the Gumi city area.

  11. Reviewing industrial safety in nuclear power plants

    International Nuclear Information System (INIS)

    1990-02-01

    This document contains guidance and reference materials for Operational Safety Review Team (OSART) experts, in addition to the OSART Guidelines (TECDOC-449), for use in the review of industrial safety activities at nuclear power plants. It sets out objectives for an excellent industrial safety programme, and suggests investigations which should be made in evaluating industrial safety programmes. The attributes of an excellent industrial safety programme are listed as examples for comparison. Practical hints for reviewing industrial safety are discussed, so that the necessary information can be obtained effectively through a review of documents and records, discussions with counterparts, and field observations. There are several annexes. These deal with major features of industrial safety programmes such as safety committees, reporting and investigation systems and first aid and medical facilities. They include some examples which are considered commendable. The document should be taken into account not only when reviewing management, organization and administration but also in the review of related areas, such as maintenance and operations, so that all aspects of industrial safety in an operating nuclear power plant are covered

  12. Superoxide dismutase: an industrial perspective.

    Science.gov (United States)

    Bafana, Amit; Dutt, Som; Kumar, Sanjay; Ahuja, Paramvir S

    2011-03-01

    The application of enzyme technologies to industrial research, development, and manufacturing has become a very important field. Since the production of crude rennet in 1874, several enzymes have been commercialized, and used for therapeutic, supplementary, and other applications. Recent advancements in biotechnology now allow companies to produce safer and less expensive enzymes with enhanced potency and specificity. Antioxidant enzymes are emerging as a new addition to the pool of industrial enzymes and are surpassing all other enzymes in terms of the volume of research and production. In the 1990s, an antioxidant enzyme--superoxide dismutase (SOD)--was introduced into the market. Although the enzyme initially showed great promise in therapeutic applications, it did not perform up to expectations. Consequently, its use was limited to non-drug applications in humans and drug applications in animals. This review summarizes the rise and fall of SOD at the industrial level, the reasons for this, and potential future thrust areas that need to be addressed. The review also focuses on other industrially relevant aspects of SOD such as industrial importance, enzyme engineering, production processes, and process optimization and scale-up.

  13. Real-Time Business Intelligence for the Utilities Industry

    Directory of Open Access Journals (Sweden)

    Janina POPEANGA

    2012-12-01

    Full Text Available In today’s competitive environment with rapid innovation in smart metering and smart grids, there is an increased need for real-time business intelligence (RTBI in the utilities industry. Giving the fact that this industry is an environment where decisions are time sensitive, RTBI solutions will help utilities improve customer experiences and operational efficiencies. The focus of this paper is on the importance of real-time business intelligence (RTBI in the utilities industry, outlining our vision of real-time business intelligence for this industry. Besides the analysis in this area, the article presents as a case study the Oracle Business Intelligence solution for utilities.

  14. Selection of industrial robots using the Polygons area method

    Directory of Open Access Journals (Sweden)

    Mortaza Honarmande Azimi

    2014-08-01

    Full Text Available Selection of robots from the several proposed alternatives is a very important and tedious task. Decision makers are not limited to one method and several methods have been proposed for solving this problem. This study presents Polygons Area Method (PAM as a multi attribute decision making method for robot selection problem. In this method, the maximum polygons area obtained from the attributes of an alternative robot on the radar chart is introduced as a decision-making criterion. The results of this method are compared with other typical multiple attribute decision-making methods (SAW, WPM, TOPSIS, and VIKOR by giving two examples. To find similarity in ranking given by different methods, Spearman’s rank correlation coefficients are obtained for different pairs of MADM methods. It was observed that the introduced method is in good agreement with other well-known MADM methods in the robot selection problem.

  15. Linkage reliability in local area network

    International Nuclear Information System (INIS)

    Buissson, J.; Sanchis, P.

    1984-11-01

    The local area networks for industrial applications e.g. in nuclear power plants counterparts intended for office use that they are required to meet more stringent requirements in terms of reliability, security and availability. The designers of such networks take full advantage of the office-oriented developments (more specifically the integrated circuits) and increase their performance capabilities with respect to the industrial requirements [fr

  16. Protection of industrial power systems

    CERN Document Server

    DAVIES, T

    2006-01-01

    The protection which is installed on an industrial power system is likely to be subjected to more difficult conditions than the protection on any other kind of power system. Starting with the many simple devices which are employed and covering the whole area of industrial power system protection, this book aims to help achieve a thorough understanding of the protection necessary.Vital aspects such as the modern cartridge fuse, types of relays, and the role of the current transformer are covered and the widely used inverse definite-minimum time overcurrent relay, the theory of the M

  17. [Atmospheric emission of PCDD/Fs from secondary aluminum metallurgy industry in the southwest area, China].

    Science.gov (United States)

    Lu, Yi; Zhang, Xiao-Ling; Guo, Zhi-Shun; Jian, Chuan; Zhu, Ming-Ji; Deng, Li; Sun, Jing; Zhang, Qin

    2014-01-01

    Five secondary aluminum metallurgy enterprises in the southwest area of China were measured for emissions of PCDD/Fs. The results indicated that the emission levels of PCDD/Fs (as TEQ) were 0.015-0.16 ng x m(-3), and the average was 0.093 ng x m(-3) from secondary aluminum metallurgy enterprises. Emission factors of PCDD/Fs (as TEQ) from the five secondary aluminum metallurgy enterprises varied between 0.041 and 4.68 microg x t(-1) aluminum, and the average was 2.01 microg x t(-1) aluminum; among them, PCDD/Fs emission factors from the crucible smelting furnace was the highest. Congener distribution of PCDD/F in stack gas from the five secondary aluminum metallurgies was very different from each other. Moreover, the R(PCDF/PCDD) was the lowest in the enterprise which was installed only with bag filters; the R(PCDF/PCDD) were 3.8-12.6 (the average, 7.7) in the others which were installed with water scrubbers. The results above indicated that the mechanism of PCDD/Fs formation was related to the types of exhaust gas treatment device. The results of this study can provide technical support for the formulation of PCDD/Fs emission standards and the best available techniques in the secondary aluminum metallurgy industry.

  18. Phytoremediation efficiency of Portulaca tuberosa rox and Portulaca oleracea L. naturally growing in an industrial effluent irrigated area in Vadodra, Gujrat, India.

    Science.gov (United States)

    Tiwari, K K; Dwivedi, S; Mishra, S; Srivastava, S; Tripathi, R D; Singh, N K; Chakraborty, S

    2008-12-01

    Phytoremediation is a novel, solar-driven and cost-effective technology for the remediation of heavy metal contaminated environments through exploitation of plants ability to accumulate heavy metals in their harvestable shoot parts. In the present investigation, we collected plants of two species of Portulaca i.e. P. tuberosa and P. oleracea from field sites in Vadodra, Gujrat, India. At one site, field was being irrigated with industrial effluent while at other with tube well water. Analysis of heavy metals was performed in industrial effluent, tube well water, soils irrigated with them, and in different parts viz., roots, stem, leaves and flowers of the plant samples. Industrial effluent and soil irrigated with it had very high level of heavy metals (Fe, Zn, Cd, Cr and As) as compared to the tube well water and soil irrigated with that. Plants of both the species growing in effluent irrigated soils showed high accumulation of metals in all plant parts with the maximum being in roots and the least in flowers. Interestingly, both species of Portulaca hyperaccumulated more than one heavy metal viz., Cd, Cr and As. The total shoot concentrations (microg g(-1) dw) of Cd, Cr and As in P. tuberosa were 1,571, 7,957 and 3,118, respectively while in P. oleracea, these were 1,128, 7,552 and 2,476, respectively. Portulaca plants have good biomass and high regeneration potential; hence appear to be suitable for the remediation of effluent (metal) contaminated areas.

  19. Combining lead isotopes and cluster analysis to distinguish the Guarani and Serra Geral Aquifer Systems and contaminated waters in a highly industrialized area in Southern Brazil.

    Science.gov (United States)

    Kuhn, Isadora Aumond; Roisenberg, Ari

    2017-10-01

    The Rio dos Sinos Watershed area is located at the Middle-West region of the Rio Grande do Sul State, Southern Brazil, along thirty two municipalities and affecting 1.5 million inhabitants and many important industrial centers. Three main aquifers are recognized in the study area: the unconfined-fractured Serra Geral Aquifer System, the porous Guarani Aquifer System, and the Permian Aquitard. This study aims to understand groundwater, surface water and human activity interactions in the Rio dos Sinos Watershed, evaluating the application of stable lead isotopic ratios analyzed for this propose. Thirty six groundwater samples, 8 surface water samples and 5 liquid effluents of tanneries and landfills samples were measured using a Thermal Ionization Mass Spectrometer Thermo-Finnigan and a Neptune Multi-Collector Inductively Coupled Plasma Mass Spectrometer. Groundwater isotopic ratios have a wider range compared to the surface water, with less radiogenic averages 208 Pb/ 204 Pb = 38.1837 vs 38.4050 (standard deviation = 0.2921 vs 0.1343) and 206 Pb/ 204 Pb = 18.2947 vs 18.4766 (standard deviation = 0.2215 vs 0.1059), respectively. Industrial liquid effluents (tanneries and industrial landfill) have averages 208 Pb/ 204 Pb = 38.1956 and 206 Pb/ 204 Pb = 18.3169, distinct from effluent samples of domestic sanitary landfill (averages 208 Pb/ 204 Pb = 38.2353 and 206 Pb/ 204 Pb = 18.6607). Hierarchical cluster analysis led to distinguish six groups of groundwater, representing the three aquifers that occur in the area, two clusters suggesting groundwater mixtures and one demonstrating a highly contaminated groundwater. By analyzing the cluster results and wells' stratigraphic profiles it was possible to distinguish the different aquifers in the area. The Serra Geral Aquifer System has 206 Pb/ 204 Pb ratios between 18.4718 and 18.7089; 207 Pb/ 204 Pb between 15.6692 and 15.6777; 208 Pb/ 204 Pb between 38.6826 and 38.7616; 207 Pb/ 206 Pb between 0.8372 and 0

  20. Report on an industrial machinery engineering policy study meeting. Studies on new energy industries; Sangyo kikai engineering seisaku kenkyukai (shin energy sangyo no kenkyu) hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1979-07-01

    Effects extended to industrial areas by new energy development were analyzed by using the industrial relation table. Technological development of new energies can mass-produce energy without being restricted by energy resource availability, and retaining manufacturing facilities can exhibit energy reserve function with security. The technologies may be suitable for local energy supply. In the aspects of industrial policies and people's living, demands on diversification and improvement of the people's living may be responded, levels of scientific technologies may be enhanced, and contribution to improving the industrial structure may be expected. The energy industry includes a large number of related industries and has vast related areas. A large number of technology induced effects can be expected in the course of research and development. A market of huge size may be estimated in the future, by which level elevation of the industrial structure would be supported. Early promotion of the new energy development is an urgent assignment for the 1980's. In order to achieve this goal, it is necessary to promote research and development, proliferation and practical application, for which the physical strength of the present Japan must be utilized to its maximum in making human and fund investments. Expansion and improvement in the industrialization infrastructures are also important, whereas the government's subsidies must be increased, and vitality in the private sector must be incorporated into organized force. (NEDO)

  1. Eco-Geography of Coastal Areas: Sosio-Economy Dynamic of Land Ownership of Coastal Areas of Indonesia

    Directory of Open Access Journals (Sweden)

    M Baiquni

    2004-01-01

    Full Text Available Indonesia constitute an archipelagic state which passesses resource of ocean, ecosystem of coast area and social economy dynamics of various maritime society. The nation of Indonesia had ever been welknown as a maritime nation which dominated Nusantara territorial waters as far as neighbour state. Fish cultivation in embankruent  system has been being known since the era of Mojopahit Kingdom and likewise boat industry was held along the north-oast of Java which was ever glorius in the beginning of Dutch Colonialism. But, up to now why a large part of Indonesian fishermen are still using simple technology and method in fishery and fish cultivation? Change in policy within Dutch era development. Which was farm land oriented and plantation had influenced the maritime tradition slip off. Opening of railway and land tract transportation in Java had changed economic ativity pattern of the oast area to hinterland. Investment and human resource were councentrated to farmland development and plantation was directed to export so that it affected the coast area slip off which was basically fishery activity. Development after independence, mainly in the era of New Order, it started from farming activity raised to industry society. Coastal area came back to develop with industrial growth in the urbans of Java north coast. Nevertheless development in fishery does not yet return to show the sign of glorious untill the end of this age. It is  hoped that, with properly judment of the islands coastal area out of Java, goverment will direct  its policy and investment to develop the new maritime society to go against the glorious in the 21st century.

  2. Nanocatalysis: Academic Discipline and Industrial Realities

    Directory of Open Access Journals (Sweden)

    Sandro Olveira

    2014-01-01

    Full Text Available Nanotechnology plays a central role in both academic research and industrial applications. Nanoenabled products are not only found in consumer markets, but also importantly in business to business markets (B2B. One of the oldest application areas of nanotechnology is nanocatalysis—an excellent example for such a B2B market. Several existing reviews illustrate the scientific developments in the field of nanocatalysis. The goal of the present review is to provide an up-to-date picture of academic research and to extend this picture by an industrial and economic perspective. We therefore conducted an extensive search on several scientific databases and we further analyzed more than 1,500 nanocatalysis-related patents and numerous market studies. We found that scientists today are able to prepare nanocatalysts with superior characteristics regarding activity, selectivity, durability, and recoverability, which will contribute to solve current environmental, social, and industrial problems. In industry, the potential of nanocatalysis is recognized, clearly reflected by the increasing number of nanocatalysis-related patents and products on the market. The current nanocatalysis research in academic and industrial laboratories will therefore enable a wealth of future applications in the industry.

  3. Characteristic of Noise-induced Hearing Loss among Workers in Construction Industries

    Science.gov (United States)

    Naadia Mazlan, Ain; Yahya, Khairulzan; Haron, Zaiton; Amsharija Mohamed, Nik; Rasib, Edrin Nazri Abdul; Jamaludin, Nizam; Darus, Nadirah

    2018-03-01

    Noise-induced hearing loss (NIHL) is among the most common occupational disease in industries. This paper investigates NIHL in construction related industries in Malaysia with particular emphasis on its relation with risk factors. The objectives of this research were to (1) quantify the prevalence of NIHL in construction related industries, and (2) assess the relationship between hearing loss and risk factors and it's characteristic. The study was conducted using 110 NIHL compensation record collected from Social Security Organisation (SOCSO), Malaysia. Risk factors namely area noise, age, temperature, smoking habit, hobby, diabetic and cardiovascular disease were identified and analysed. Results showed that there was no direct relationship between area noise with hearing impairment while there was only low relationship between age and hearing impairment. The range for area noise and age were between 70 to 140 dB(A) and 20 to 70 years, respectively. The other risk factors classified as categorical data and analysed using frequency method. Grade of impairment does not depend solely on area noise but also in combination with age and other risk factors. Characteristic of NIHL prevailed in construction related industries were presented using scatterplots and can serve as a references for future hazard control on site.

  4. The utilization of irradiation techniques in food industry

    International Nuclear Information System (INIS)

    Szabo, S.A.

    1988-01-01

    Irradiation technical researches and the main areas of nuclear technical applications are surveyed, and the main areas where nuclear techniques are used are reported. Then an overview on radiation techniques including radiostimulation, radiomutation, radurization, radioecology and isotope techniques used in the food industry is presented. (author) 4 refs

  5. PENGOLAHAN AIR LIMBAH INDUSTRI KECIL PELAPISAN LOGAM

    OpenAIRE

    Yudo, Satmoko; Said, Nusa Idaman

    2017-01-01

    Water pollution in Jakarta area, especially river and shallow groundwater, had become a very serious problem. Pollution problem caused by small industrial activities had not been got attetion. Some activities, which often cause water pollution problem, were wastewater from electroplating small industry. This wastewater was one of the most potential pollutant sources, because it contains high concentration of heavy metal pollutant such as Fe, Ni, Zn, Cr, ect. To anticipate its negative effect ...

  6. Library Service to Industry at USC: The Industrial Associates of the School of Engineering.

    Science.gov (United States)

    Frohmberg, Katherine A.

    Special libraries in Southern California and the San Francisco Bay Area who were members of the University of Southern California (USC) School of Engineering Industrial Associate program were surveyed on their use of the USC program and other similar programs. The questionnaire was designed to discover the attitudes and needs of the Industrial…

  7. Dust and smoke pollution monitoring in industrial unit

    International Nuclear Information System (INIS)

    Shamsi, S.S.

    1995-01-01

    Dust and smoke are the two most commonly emitted industrial pollutants which are visible to the naked eye. Cement plants and power generation plants, based on coal and fuel oil etc. are the most common examples of industry emitting these pollutants. In this article these pollutants have been briefly described and some monitoring instruments for dust and smoke emissions have been specific. These instruments are especially suitable for power station and the cement industry etc. Automotive in urban areas. However, this paper does not include equipment for automotive exhaust pollution. (author)

  8. Allegheny County Land Cover Areas

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — The Land Cover dataset demarcates 14 land cover types by area; such as Residential, Commercial, Industrial, Forest, Agriculture, etc. If viewing this description on...

  9. Belledune area health study : summary report

    International Nuclear Information System (INIS)

    2005-02-01

    The Belledune area has been home to various industrial activities such as mining, smelting, fertilizer plants, battery-recycling plants, gypsum plants, sawmills, and a coal-fired electricity generating facility. These industries have had various types and quantities of emissions over the past 4 decades that may have impacted on the health of people in the area. This report provided details of the Belledune Health Area Study. The objective of the study was to ensure that the concerns of residents were addressed and that the historical and human health risks associated with past and current industrial activities were quantified. The current health status of residents in the area was examined with reference to environmental exposures, and recommendations for future studies and research based on the results of the study were presented. Two main components were used: the human health risk assessment (HHRA), and community health status assessment (CHSA). Best estimate calculations for residents in the core communities showed that exposures to cadmium, lead and mercury were predicted to be below toxicity reference values. In Belledune itself, child exposures to cadmium and mercury were above the toxicity reference value. Results indicated that the health status pattern for the study area was different from that found in the surrounding areas. There was a statistically significantly elevated incidence of oral, respiratory, and prostate cancer and elevated incidences of kidney and colorectal cancer. There was a higher mortality rate than expected, and there were more deaths than expected due to circulatory disease, cancer and other causes such as accidents and suicides. An expanded survey of blood lead among child residents and pregnant women was recommended. A program was launched to collect data on metal concentrations in fish from the Baie des Chaleurs and additional data on vegetables from the Greater Belledune area. Future research on some of the factors associated

  10. Belledune area health study : summary report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-02-01

    The Belledune area has been home to various industrial activities such as mining, smelting, fertilizer plants, battery-recycling plants, gypsum plants, sawmills, and a coal-fired electricity generating facility. These industries have had various types and quantities of emissions over the past 4 decades that may have impacted on the health of people in the area. This report provided details of the Belledune Health Area Study. The objective of the study was to ensure that the concerns of residents were addressed and that the historical and human health risks associated with past and current industrial activities were quantified. The current health status of residents in the area was examined with reference to environmental exposures, and recommendations for future studies and research based on the results of the study were presented. Two main components were used: the human health risk assessment (HHRA), and community health status assessment (CHSA). Best estimate calculations for residents in the core communities showed that exposures to cadmium, lead and mercury were predicted to be below toxicity reference values. In Belledune itself, child exposures to cadmium and mercury were above the toxicity reference value. Results indicated that the health status pattern for the study area was different from that found in the surrounding areas. There was a statistically significantly elevated incidence of oral, respiratory, and prostate cancer and elevated incidences of kidney and colorectal cancer. There was a higher mortality rate than expected, and there were more deaths than expected due to circulatory disease, cancer and other causes such as accidents and suicides. An expanded survey of blood lead among child residents and pregnant women was recommended. A program was launched to collect data on metal concentrations in fish from the Baie des Chaleurs and additional data on vegetables from the Greater Belledune area. Future research on some of the factors associated

  11. Exploring research priorities for the North American hardwood industry

    Science.gov (United States)

    David Brinberg; Earl Kline; Delton Alderman; Philip Araman; Ed Cesa; Steve Milauskas; Tom Walthousen; Jan Wiedenbeck

    2008-01-01

    With the increase of globalization, the North American hardwood industry is facing many challenges to remain competitive and sustainable, facing drastic changes in the areas of labor, land, manufacturing, markets and marketing, and supply chain. The hardwood industry is especially vulnerable, with the influx of foreign manufacturers and suppliers with greater natural...

  12. Alberta's Industrial Heartland Land Trust Society : voluntary property purchase program information booklet

    International Nuclear Information System (INIS)

    2006-01-01

    Alberta's industrial heartland is home to one of Canada's largest concentrations of petroleum, refining, petrochemical and chemical production facilities. To date, more than $25 billion has been invested in major industrial plants in the heartland and adjacent Strathcona industrial regions by major corporations, and more investment is expected in the future. The Industrial Heartland Collaboration to Address Resident Interests is a process in which area residents, municipalities, industries and the provincial government are working collaboratively to resolve concerns related to the cumulative operations and expansion of industry. This paper presented details of the Alberta Industrial Heartland Land Trust Society's voluntary purchase program, which was initiated to provide an equitable, efficient and economical process of acquiring properties of rural landowners currently located within region who voluntarily wish to relocate outside of the policy area. Application and eligibility details were presented, as well as an outline of the property appraisal process. Details of the compliance and real property report required by the program were presented. Issues concerning relocation and moving expenses were discussed, as well as details of the program's flat rate inconvenience payment

  13. 47 CFR 52.19 - Area code relief.

    Science.gov (United States)

    2010-10-01

    ... meetings to which the telecommunications industry and the public are invited on area code relief for a... 47 Telecommunication 3 2010-10-01 2010-10-01 false Area code relief. 52.19 Section 52.19 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) NUMBERING...

  14. Trigger chemistries for better industrial formulations.

    Science.gov (United States)

    Wang, Hsuan-Chin; Zhang, Yanfeng; Possanza, Catherine M; Zimmerman, Steven C; Cheng, Jianjun; Moore, Jeffrey S; Harris, Keith; Katz, Joshua S

    2015-04-01

    In recent years, innovations and consumer demands have led to increasingly complex liquid formulations. These growing complexities have provided industrial players and their customers access to new markets through product differentiation, improved performance, and compatibility/stability with other products. One strategy for enabling more complex formulations is the use of active encapsulation. When encapsulation is employed, strategies are required to effect the release of the active at the desired location and time of action. One particular route that has received significant academic research effort is the employment of triggers to induce active release upon a specific stimulus, though little has translated for industrial use to date. To address emerging industrial formulation needs, in this review, we discuss areas of trigger release chemistries and their applications specifically as relevant to industrial use. We focus the discussion on the use of heat, light, shear, and pH triggers as applied in several model polymeric systems for inducing active release. The goal is that through this review trends will emerge for how technologies can be better developed to maximize their value through industrial adaptation.

  15. Air emission control in a modern industrial gasification-cogeneration plant

    International Nuclear Information System (INIS)

    Bifulco, S.; Panico, A.

    2001-01-01

    The present paper reports the study technology and environmental of new industry integrated gasification - combined cycle - in Priolo Gargallo area at Siracusa. The analysis shows as the suggested industry waste strategy would bring about benefits on both the environmental and economic view points [it

  16. Galvanizing industry: evaluation of exposure levels using biomonitors

    Energy Technology Data Exchange (ETDEWEB)

    Menezes, Maria Angela de B.C.; Sabino, Claudia de V.S.; Amaral, Angela Maria [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN), Belo Horizonte, MG (Brazil); Mattos, Silvania V. de M. [FUNED, Belo Horizonte, MG (Brazil). Div. de Bromatologia e Toxicologia; S. Filho, Serafim [Secretaria Municipal de Saude de Belo Horizonte, MG (Brazil). Coordenacao de Saude do Trabalhador; Maia, Elene Cristina P. [Minas Gerais Univ., Belo Horizonte, MG (Brazil). Dept. de Quimica

    1999-11-01

    In Brazil, statistical surveys concerning occupational diseases refer to accidents and damages. The surveys do not refer to the occupational diseases developed through long exposures to hazardous work conditions, involving physical risk and toxic chemical substances. The Program of Medical Control of Occupational Health determines the Maximum Biological Levels Allowed and the Values of Normality References. But concerning metal and toxic inorganic, values of only few elements are established. In Belo Horizonte and surroundings areas, which is an important industrial centre in the country, there are different industries distributed over various areas. There are about 80 galvanizing industries which are responsible for the majority of the metal contamination hospitalities. A preliminary sampling was performed in order to conduct a survey of the exposures to elements related to occupational diseases in galvanizing industry. The preliminary results for toxic and non-toxic elements obtained using hair and fingernails as biomonitors are shown. The K{sub 0} parametric neutron activation analysis method was applied and the elements determined were: Ag, Al, Au, Cl, Co, Cr, Cu, Fe, I, Mn, Na, Ti, V, Ta, and Zn. (author) 8 refs., 3 figs., 2 tabs.; e-mail: menezes at urano.cdtn.br

  17. Computer-related standards for the petroleum industry

    International Nuclear Information System (INIS)

    Winczewski, L.M.

    1992-01-01

    Rapid application of the computer to all areas of the petroleum industry is straining the capabilities of corporations and vendors to efficiently integrate computer tools into the work environment. Barriers to this integration arose form decades of competitive development of proprietary applications formats, along with compilation of data bases in isolation. Rapidly emerging industry-wide standards relating to computer applications and data management are poised to topple these barriers. This paper identifies the most active players within a rapidly evolving group of cooperative standardization activities sponsored by the petroleum industry. Summarized are their objectives, achievements, current activities and relationships to each other. The trends of these activities are assessed and projected

  18. Linacs for medical and industrial applications

    International Nuclear Information System (INIS)

    Hamm, R.W.

    1986-01-01

    Linear accelerators for medical and industrial applications have become an important commercial business. Microwave electron linacs for cancer radiation therapy and high-energy industrial radiography form the bulk of this market, but these, as well as induction linacs, are now being offered for radiation processing applications such as sterilization of disposable medical products, food preservation and material modifications. The radio frequency quadrupole (RFQ) linac has now made the ion linac also practical for commercial applications in medicine and industry, including radiation therapy, isotope production, neutron production, materials modification, and energy transfer processes. Ion linacs for several of these applications will soon be commercially available. The market for both ion and electron linacs is expected to significantly grow in several exciting and important areas

  19. CONCEPTION AND DEVELOPMENT OF A SYSTEM USED TO ORGANIZE AND FACILITATE ACCESS TO ENVIRONMENTAL INFORMATION AND ITS USE IN AREAS CONTAMINATED BY INDUSTRIAL WASTE

    Directory of Open Access Journals (Sweden)

    Pedro Luiz Côrtes

    2013-04-01

    Full Text Available In São Paulo State (Brazil coastal area, for several years, a chemical industry discharged, without any sort of environmental control, a blend of industrial waste formed by Persistent Organic Pollutants (POPs. Judicial suits forced the company to identify and limit such deposits in order to perform environmental recovery work. Project were developed demanding preparation and handling of a large amount of documents, satellite images, aerial photographs, maps and videos with the increase of the information and knowledge management issues. This condition became even more critical as the projects started to become cross-disciplinary, involving a growing number of experts, many of them established in different cities. Those circumstances led to the generation of an Environmental Information System (BASGEO enabling organization and facilitation of access to such documents while increasing information safety. This work shows the development of this system and the difficulties related to environmental documents management and handling.

  20. Mining and sustainable development: environmental policies and programmes of mining industry associations

    International Nuclear Information System (INIS)

    Miller, C.G.

    1997-01-01

    Mining industry policies and practices have evolved rapidly in the environmental area, and more recently in the social area as well. Mining industry associations are using a variety of methods to stimulate and assist their member companies as they improve their environmental, social and economic performance. These associations provide opportunities for companies to use collaborative approaches in developing and applying improved technology, systems and practices (author)

  1. Distribution of heavy metals in peri-urban agricultural areas soils

    International Nuclear Information System (INIS)

    Iram, S.; Ahmad, I.; Akhtar, S.

    2012-01-01

    In industry oriented peri-urban areas, the heavy metals accumulation in soils caused by industrialization has become a potential threat. The top soil sample from 48 agricultural fields were collected from a typical industry based peri-urban areas (Lahore, Faisalabad, Multan, Kasur, Islamabad, Wah Cantt.) of Punjab, Pakistan to study the accumulation and distribution of heavy metals (Pb, Cd, Cr, Cu, Ni and Zn) by atomic absorption spectrophotometer. The aim of the study was to investigate influence of an industrialized environment on the accumulation of heavy metals in peri-urban agricultural soils. The results of the study showed that the Pb content in the soil ranged from 17.24 to 126.4 mg/kg and the highest Pb content was observed in Islamabad soil samples, and the lowest in that of Multan area. The Cd content ranged from 1.1 to 4.0 mg/kg in Lahore while the highest Cr concentration level was 210.2 mg/kg and it was observed in Kasur and lowest 30.60 in that of Multan. The Cu content ranged from 31.2 to 127.9 mg/kg (Kasur-Lahore). The highest Ni concentration (82.0 mg/kg) was observed in Lahore from the urban area and the lowest level of 12.15 mg/kg was observed in Multan. The Zn content ranged from 42.5 to 267.7 mg/kg (Faisalabad-Wah Cantt). The study concluded that the concentration level of the heavy metals (Pb, Cd, Cu, Ni, Cr, Zn) in the studied peri-urban areas was higher as compared to heavy metal content of normal Dutch soil. High automobile traffic and industrial waste both are the most likely sources of the contamination of the peri urban areas of Pakistan. (author)

  2. Air quality status of an open pit mining area in India.

    Science.gov (United States)

    Chaulya, S K

    2005-06-01

    This investigation presents the assessment of ambient air quality carried out at an open pit coal mining area in Orissa state of India. The 24-h average concentrations of suspended particulate matter (SPM), respirable particulate matter (RPM, particles of less than 10 microm aerodynamic diameter), sulphur dioxide (SO2) and oxides of nitrogen (NO(x)) were determined at regular interval throughout one year at 13 monitoring stations in residential area and four stations in mining/industrial area. During the study period, the 24-h and annual average SPM and RPM concentrations exceeded the respective standards set in the Indian ambient air quality standard (NAAQS) protocol in most of the residential and industrial areas. However, the 24-h and annual average concentrations of SO2 and NO(x) were well within the prescribed limit of the NAAQS in both residential and industrial areas. A management strategy is formulated for effective control of particulate matter at source and other mitigative measures are recommended including implementation of green belts around the sensitive areas.

  3. An essay on: management of industrial waste, an engineer's viewpoint

    International Nuclear Information System (INIS)

    Raphael, M.A.

    1995-01-01

    Industrial waste and industrial waste management are described, with economic considerations and recommendations for an industrial waste management program applicable in Lebanon. Different conceptual systems for industrial waste management are presented: - The O effluent industrial plant, an electric manufacturing plant with mass and energy balance. - The industrial complexing concept where environmentally balanced and compatible, industries are located in one area. Waste effluents from one plant can be used as raw material for another plant. - A standard petroleum waste recovery plant to cope with local requirements complementary to the proposed sanitary waste treatment plant in Lebanon. Major sources of industrial waste in Lebanon are analyzed:local process industries, hospitals, laboratories, petroleum industries and power generation, are the major sources cited. For each source the level of treatment is indicated. Tables and appendixes on waste treatment and management along with the ISO 9000 series are presented. 10 refs. 3 figs

  4. DISPARITAS DAN SPESIALISASI INDUSTRI MANUFAKTUR KABUPATEN / KOTA DI JAWA TENGAH

    Directory of Open Access Journals (Sweden)

    - Kusumantoro

    2012-01-01

    Full Text Available The aim of this research is measure disparity and identification of specialization industry in the localregion of central java province. This research use the local government data from BPS (Badan PusatStatistik from 2001 until 2006. Analizis of this research is index theil and regional specialization Index.The result of manufacture industry disparity in local government central java province show different levelin the Theil entropy index. Identification result of local industry in the central java province show thatindustry activity is food industry (ISIC 15, garment Industry (ISIC 17, Manufacture industry (ISIC 20and chemical industry (ISIC 24. The specialization in the same area, usualy have the same industry.Semarang region (Semarang and kudus is specilized in garment industry (ISIC 18 and publiser (ISIC22. Surakarta region (Sukoharjo and Karanganyar is textile, garment and chemical specializationindustry (ISIC 24Keywords: disparity, industry specialized, Index Theil.

  5. Soil concentrations and source apportionment of polybrominated diphenyl ethers (PBDEs) and trace elements around a heavily industrialized area in Kocaeli, Turkey.

    Science.gov (United States)

    Cetin, Banu

    2014-01-01

    Air pollutants are transported by dry deposition, wet deposition, and gas exchange accumulated in soil. Therefore, soil is an important environmental medium reflecting the level and the spatial distribution of air pollutants such as polybrominated diphenyl ethers (PBDEs) and heavy metals. Soil concentrations of seven PBDE congeners and 21 trace elements were determined in a heavily industrialized region (Dilovasi) in Kocaeli, Turkey. At all sites, Σ7PBDE concentrations ranged from 0.70 to 203 with a mean value of 26.3 μg kg(-1) (dry weight). The congener profiles and mass inventories of PBDEs and their interactions with soil organic matter (SOM) were also investigated. BDE-209 was the dominant congener at all sites, followed by BDE-99 and/or -47. The estimated inventory of PBDEs for the Dilovasi district was 310 kg. However, there are several additional industrial regions in Kocaeli city. Considering the total land area, the potential inventory would be much larger for this city. The relationship between the PBDE concentrations in soil and SOM content indicated that factors other than soil properties have a greater influence on soil concentrations. Crustal enrichment factors (EFs) were determined; correlation analysis and factor analysis (FA) were also applied to generated data set to identify and apportion the sources polluting the soil. Sn, Mn, Ca, As, Zn, Pb, and Cd had significantly high average EF values, indicating that their soil concentrations were mainly influenced by anthropogenic activities. In FA, six factors were extracted with a cumulative variance of 84.4 % and industrial activities and traffic were found to be the main factors affecting the soil profile.

  6. Analysis of soil samples from Gebeng area using NAA technique

    Science.gov (United States)

    Elias, Md Suhaimi; Wo, Yii Mei; Hamzah, Mohd Suhaimi; Shukor, Shakirah Abd; Rahman, Shamsiah Ab; Salim, Nazaratul Ashifa Abdullah; Azman, Muhamad Azfar; Hashim, Azian

    2017-01-01

    Rapid development and urbanization will increase number of residence and industrial area. Without proper management and control of pollution, these will give an adverse effect to environment and human life. The objective of this study to identify and quantify key contaminants into the environment of the Gebeng area as a result of industrial and human activities. Gebeng area was gazetted as one of the industrial estate in Pahang state. Assessment of elemental pollution in soil of Gebeng area base on level of concentration, enrichment factor and geo-accumulation index. The enrichment factors (EFs) were determined by the elemental rationing method, whilst the geo-accumulation index (Igeo) by comparing of current to continental crustal average concentration of element. Twenty-seven of soil samples were collected from Gebeng area. Soil samples were analysed by using Neutron Activation Analyses (NAA) technique. The obtained data showed higher concentration of iron (Fe) due to abundance in soil compared to other elements. The results of enrichment factor showed that Gebeng area have enrich with elements of As, Br, Hf, Sb, Th and U. Base on the geo-accumulation index (Igeo) classification, the soil quality of Gebeng area can be classified as class 0, (uncontaminated) to Class 3, (moderately to heavily contaminated).

  7. Chemicals Industry New Process Chemistry Roadmap

    Energy Technology Data Exchange (ETDEWEB)

    none,

    2000-08-01

    The Materials Technology I workshop was held in November 1998 to address future research needs for materials technology that will support the chemical industry. Areas covered included disassembly, recovery, reuse and renewable technology; new materials; and materials measurement and characterization. The Materials Technology II workshop was held in September 1999 and covered additives, modeling and prediction and an additional segment on new materials. Materials Technology Institute (MTI) for the Chemical Process Industries, Inc. and Air Products & Chemicals lead the workshops. The Materials Technology Roadmap presents the results from both workshops.

  8. Environmental Control Plan for the Industrial Hygiene Field Services Facility

    International Nuclear Information System (INIS)

    Donnelly, J.W.

    2000-01-01

    This environmental control plan is for the Hanford Site's Industrial Hygiene Field Services Facility, located in the 100-N Area. This facility is used for the maintenance and storage of respirators, respiratory equipment and testing, calibration and testing of industrial hygiene equipment, and asbestos fiber counting

  9. Regional Inequalities in Lung Cancer Mortality in Belgium at the Beginning of the 21st Century: The Contribution of Individual and Area-Level Socioeconomic Status and Industrial Exposure.

    Directory of Open Access Journals (Sweden)

    Paulien Hagedoorn

    Full Text Available Being a highly industrialized country with one of the highest male lung cancer mortality rates in Europe, Belgium is an interesting study area for lung cancer research. This study investigates geographical patterns in lung cancer mortality in Belgium. More specifically it probes into the contribution of individual as well as area-level characteristics to (sub-district patterns in lung cancer mortality. Data from the 2001 census linked to register data from 2001-2011 are used, selecting all Belgian inhabitants aged 65+ at time of the census. Individual characteristics include education, housing status and home ownership. Urbanicity, unemployment rate, the percentage employed in mining and the percentage employed in other high-risk industries are included as sub-district characteristics. Regional variation in lung cancer mortality at sub-district level is estimated using directly age-standardized mortality rates. The association between lung cancer mortality and individual and area characteristics, and their impact on the variation of sub-district level is estimated using multilevel Poisson models. Significant sub-district variations in lung cancer mortality are observed. Individual characteristics explain a small share of this variation, while a large share is explained by sub-district characteristics. Individuals with a low socioeconomic status experience a higher lung cancer mortality risk. Among women, an association with lung cancer mortality is found for the sub-district characteristics urbanicity and unemployment rate, while for men lung cancer mortality was associated with the percentage employed in mining. Not just individual characteristics, but also area characteristics are thus important determinants of (regional differences in lung cancer mortality.

  10. Urban Integrated Industrial Cogeneration Systems Analysis. Phase II final report

    Energy Technology Data Exchange (ETDEWEB)

    1984-01-01

    Through the Urban Integrated Industrial Cogeneration Systems Analysis (UIICSA), the City of Chicago embarked upon an ambitious effort to identify the measure the overall industrial cogeneration market in the city and to evaluate in detail the most promising market opportunities. This report discusses the background of the work completed during Phase II of the UIICSA and presents the results of economic feasibility studies conducted for three potential cogeneration sites in Chicago. Phase II focused on the feasibility of cogeneration at the three most promising sites: the Stockyards and Calumet industrial areas, and the Ford City commercial/industrial complex. Each feasibility case study considered the energy load requirements of the existing facilities at the site and the potential for attracting and serving new growth in the area. Alternative fuels and technologies, and ownership and financing options were also incorporated into the case studies. Finally, site specific considerations such as development incentives, zoning and building code restrictions and environmental requirements were investigated.

  11. Skiing in the Great Lakes States: the industry and the skier.

    Science.gov (United States)

    William A. Leuschner

    1970-01-01

    Describes the skiers and ski areas in the Midwest. Analyzes market structure for the industry, the factors associated with financial success, the impact of spending on local economies, and the potential of ski area investment. Includes ski area financial statements.

  12. Industrial requirements for new crops

    International Nuclear Information System (INIS)

    Hirsinger, F.; Zoebelein, H.

    1989-01-01

    Natural raw materials should be understood as highly refined chemicals ready for derivatization rather than degradation through fermentation. Chemistry and agriculture have had a long connection in the manufacturing of fibres, paints, glues, and soaps when natural raw materials were supplied by agricultural production. With the detection of crude oil as a chemical raw material, this connection seemed to fall apart. After the energy crises of 1973 and 1979, the 'oil shocks', a revival of interest in renewable raw materials was triggered. Only 10% of all the raw materials used by the organic chemical industry represents renewable resources. The chemical industry is developing new markets for such resources. In most cases these raw materials come from developing countries. Agriculture in industrialized nations is asked to match these developments through intensive research in the areas of agronomy and plant breeding. Examples of such new raw materials which are discussed include high oleic sunflower oil, Euphorbia lathyris (spurge) oil, Cuphea oil, high erucic rapeseed oil, Crambe and mustard oil, meadowfoam and coriander oil. The agricultural production of such custom tailored industrial raw materials could become a new outlet for industrialized countries' agriculture, which today is characterized by a surplus production of food. (author). 2 tabs

  13. An association between air pollution and daily outpatient visits for respiratory disease in a heavy industry area.

    Science.gov (United States)

    Wang, Kuo-Ying; Chau, Tang-Tat

    2013-01-01

    In this work we used daily outpatient data from the Landseed Hospital in a heavily industrial area in northern Taiwan to study the associations between daily outpatient visits and air pollution in the context of a heavily polluted atmospheric environment in Chung-Li area during the period 2007-2011. We test the normality of each data set, control for the confounding factors, and calculate correlation coefficient between the outpatient visits and air pollution and meteorology, and use multiple linear regression analysis to seek significance of these associations. Our results show that temperature and relative humidity tend to be negatively associated with respiratory diseases. NO and [Formula: see text] are two main air pollutants that are positively associated with respiratory diseases, followed by [Formula: see text], [Formula: see text], [Formula: see text], CO, and [Formula: see text]. Young outpatients (age 0-15 years) are most sensitive to changing air pollution and meteorology factors, followed by the eldest (age [Formula: see text]66 years) and age 16-65 years of outpatients. Outpatients for COPD diseases are most sensitive to air pollution and meteorology factors, followed by allergic rhinitis, asthma, and pneumonia diseases. In the context of sex difference to air pollution and meteorological factors, male outpatients are more sensitive than female outpatients in the 16-65 age groups, while female outpatients are more sensitive than male outpatients in the young 0-15 age groups and in the eldest age groups. In total, female outpatients are more sensitive to air pollution and meteorological factors than male outpatients.

  14. An association between air pollution and daily outpatient visits for respiratory disease in a heavy industry area.

    Directory of Open Access Journals (Sweden)

    Kuo-Ying Wang

    Full Text Available In this work we used daily outpatient data from the Landseed Hospital in a heavily industrial area in northern Taiwan to study the associations between daily outpatient visits and air pollution in the context of a heavily polluted atmospheric environment in Chung-Li area during the period 2007-2011. We test the normality of each data set, control for the confounding factors, and calculate correlation coefficient between the outpatient visits and air pollution and meteorology, and use multiple linear regression analysis to seek significance of these associations. Our results show that temperature and relative humidity tend to be negatively associated with respiratory diseases. NO and [Formula: see text] are two main air pollutants that are positively associated with respiratory diseases, followed by [Formula: see text], [Formula: see text], [Formula: see text], CO, and [Formula: see text]. Young outpatients (age 0-15 years are most sensitive to changing air pollution and meteorology factors, followed by the eldest (age [Formula: see text]66 years and age 16-65 years of outpatients. Outpatients for COPD diseases are most sensitive to air pollution and meteorology factors, followed by allergic rhinitis, asthma, and pneumonia diseases. In the context of sex difference to air pollution and meteorological factors, male outpatients are more sensitive than female outpatients in the 16-65 age groups, while female outpatients are more sensitive than male outpatients in the young 0-15 age groups and in the eldest age groups. In total, female outpatients are more sensitive to air pollution and meteorological factors than male outpatients.

  15. The Clustering Effect of Industrial Sites: Turning Morphology into Guidelines for Future Developments within the Turin Metropolitan Area

    Directory of Open Access Journals (Sweden)

    Giuseppe Roccasalva

    2012-11-01

    Full Text Available As urban societies seek to redefine themselves following the decline of manufacturing, they are left with physical and social transformations supported by successive stages of industrial growth and shrinking. At the same time, new paradigms are developed in urban planning to address the challenge of cities that are declining and cities whose population is rapidly rising. As such, these attempts raise the need to understand the impact of the street network on how cities thrive or shrink, additionally to social, cultural and economic changes. This paper uses space syntax methodology and a comprehensive mapping of industrial distribution to analyse the evolution of Turin (capital of car manufacturing in Italy and its relationship to industry from 1920 to the present. The paper focuses on the morphological clustering of industrial sites and how alternative concepts for planning development may be generated. The analysis showed that industry began within the urban core along the primary routes of global-scale movement. However, as a new era of economic production took place at the end of the 20th century, the street network and industry followed a different spatial logic. Industrial activities spread along the periphery in island clusters in close proximity to global arteries of movement. Turin’s centre, on the other hand retained a backbone of integrated streets that enabled its reinforcement when industry relocated. The analysis of their historic development shows that new concepts should be informed by quantitative analysis of the evolution of the urban street network and its effects on economic activity, such that the configurational logical described may provide the basis for future guideline policies. 

  16. Human factors considerations for expert systems in the nuclear industry

    International Nuclear Information System (INIS)

    Nelson, W.R.

    1988-01-01

    This paper discusses the general human factors issues relative to the development and implementation of expert systems for the nuclear industry. It summarizes the relevant research that addresses these issues, and identifies those areas that need the most effort for success. Since much of the prominent work for the application of expert systems has focused on computerized aids for decision making in emergencies, this paper draws from this area for its examples. This area tends to highlight the issues because of the safety-critical nature of the application. The same issues, however, are relevant to other applications of expert systems in the nuclear industry as well, even though the consequences of failure may not be as dramatic

  17. Principal component analysis of air particulate data from the industrial area of islamabad, pakistan

    International Nuclear Information System (INIS)

    Waheed, S.; Siddique, N.; Daud, M.

    2008-01-01

    A Gent air sampler was used to collect 72 pairs of size fractionated coarse and fine (PM/sub 10/ and PM/sub 2.5/) particulate mass samples from the industrial zone (sector I-9) of Islamabad. These samples were analyzed for their elemental composition using Instrumental Neutron Activation Analysis (INAA). Principal component analysis (PCA), which can be used for source apportionment of quantified elemental data, was used to interpret the data. Graphical representations of loadings were used to explain the data through grouping of the elements from same source. The present work shows well defined elemental fingerprints of suspended soil and road dust, industry, motor vehicle exhaust and tyres, and coal and refuses combustions for the studied locality of Islamabad. (author)

  18. Trends in Industry Supervisors' Feedback on Business Communication Internships

    Science.gov (United States)

    Sapp, David Alan; Zhang, Qin

    2009-01-01

    The purpose of this empirical study is to explore expectations of industry insiders and identify how student interns are performing in relation to those expectations as defined by 11 performance areas. The results of a survey of 238 industry supervisors were collected over a 5-year period in the departments of English and communication at a…

  19. Impact of Globalisation on Industrial Relations

    Directory of Open Access Journals (Sweden)

    Kaia Philips

    2013-01-01

    Full Text Available Globalisation means intensified competition, the transfer of investments, production relocation outside of Europe, job losses, unemployment and rapid structural changes. European labour markets are characterised as relatively rigid, with high social security and strong industrial relations (IR. The aim of this study is to find out, how the social partners, governments and researchers interpret the challenges of globalisation on future developments of industrial relations. The research is based on expert foresight survey where IR experts from 34 countries were interviewed. The project looked to the future, to the year 2025 and discussed on what industrial relations and social dialogue would look like after fifteen-twenty years. The main findings convinced that decentralisation of collective bargaining is expected in old member states, while the situation will remain unchanged in majority of the new member states. We can conclude that European level convergence is expected in the area of industrial relations

  20. Challenges of technical cooperation in the petroleum industry

    International Nuclear Information System (INIS)

    Al-Athel, S.A.

    1992-01-01

    The need and prospects for international technical cooperation in the petroleum industry are reviewed. Since it directly affects the survival of the inhabitants of the planet, environmental protection is a field that could enjoy maximum international cooperation; oil spills, product environmental hazards, waste minimization and disposal and oil field fires are the main areas identified. Technical cooperation in other areas of the industry, namely exploration, production, oil field development, refining and petrochemicals, may involve some controversy. Attention is drawn to the conflicting interests of multinational companies, who almost completely control the technology of these activities, and host developing countries. It is advocated that arrangements involving technology transfer should make provision for the growth of indigenous technology. (UK)