Borja, Marco Antonio; Parkman Cuellar, Pablo A. [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)
Wind is an inexhaustible energy source. To study its behavior in order to develop research projects and apply new technologies connected to its maximum development is one of the activities carried on at the Instituto de Investigaciones Electricas (IIE). As a part of such activities, the equipment Anemodata-1-IIE was designed and built for the wind velocity and direction data acquisition. The Anemodata-1-IIE is the result of the work that the Departamento de Fuentes no Convencionales (Non-Conventional Energy Sources of the Energy Sources Department) carries on regarding the development of electric equipment for the anemometry. [Espanol] Una fuente inagotable de energia es el viento. Estudiar su comportamiento para desarrollar proyectos de investigacion y aplicar nuevas tecnologias vinculadas con su maximo aprovechamiento es una de las actividades que se realizan en el Instituto de Investigaciones Electricas (IIE). Como parte de dichas actividades, se diseno y construyo el equipo Anemodata-1-IIE para la adquisicion de datos de velocidad y direccion del viento. El anemodata-1-IIE es un resultado de los trabajos que el Departamento de Fuentes no Convencionales, de la division de Fuentes de Energia, lleva a cabo en torno al desarrollo de equipo electrico para anemometria.
Automatic sequences are sequences which are produced by a finite automaton. Although they are not random they may look as being random. They are complicated, in the sense of not being not ultimately periodic, they may look rather complicated, in the sense that it may not be easy to name the rule by which the sequence is generated, however there exists a rule which generates the sequence. The concept automatic sequences has special applications in algebra, number theory, finite automata and formal languages, combinatorics on words. The text deals with different aspects of automatic sequences, in particular:· a general introduction to automatic sequences· the basic (combinatorial) properties of automatic sequences· the algebraic approach to automatic sequences· geometric objects related to automatic sequences.
Sakellaris, P. C. (Inventor)
Fluid automatically flows to individual dispensing units at predetermined times from a fluid supply and is available only for a predetermined interval of time after which an automatic control causes the fluid to drain from the individual dispensing units. Fluid deprivation continues until the beginning of a new cycle when the fluid is once again automatically made available at the individual dispensing units.
Narcis Eduard Mitu
Full Text Available Policies or institutions (built into an economic system that automatically tend to dampen economic cycle fluctuations in income, employment, etc., without direct government intervention. For example, in boom times, progressive income tax automatically reduces money supply as incomes and spendings rise. Similarly, in recessionary times, payment of unemployment benefits injects more money in the system and stimulates demand. Also called automatic stabilizers or built-in stabilizers.
Corliss, G.F. (comp.)
This is a bibliography of work related to automatic differentiation. Automatic differentiation is a technique for the fast, accurate propagation of derivative values using the chain rule. It is neither symbolic nor numeric. Automatic differentiation is a fundamental tool for scientific computation, with applications in optimization, nonlinear equations, nonlinear least squares approximation, stiff ordinary differential equation, partial differential equations, continuation methods, and sensitivity analysis. This report is an updated version of the bibliography which originally appeared in Automatic Differentiation of Algorithms: Theory, Implementation, and Application.
Shin, Yun Gi
This book gives descriptions of automatic control for electrical electronics, which indicates history of automatic control, Laplace transform, block diagram and signal flow diagram, electrometer, linearization of system, space of situation, state space analysis of electric system, sensor, hydro controlling system, stability, time response of linear dynamic system, conception of root locus, procedure to draw root locus, frequency response, and design of control system.
Servant, Mathieu; Cassey, Peter; Woodman, Geoffrey F.; Logan, Gordon D.
Automaticity allows us to perform tasks in a fast, efficient, and effortless manner after sufficient practice. Theories of automaticity propose that across practice processing transitions from being controlled by working memory to being controlled by long-term memory retrieval. Recent event-related potential (ERP) studies have sought to test this…
Automatic Code Inspection tools help developers in early detection of defects in software. A well-known drawback of many automatic inspection approaches is that they yield too many warnings and require a clearer focus. In this thesis, we provide such focus by proposing two methods to prioritize
Automatic differentiation is a method of computing derivatives of functions to any order in any number of variables. The functions must be expressible as combinations of elementary functions. When evaluated at specific numerical points, the derivatives have no truncation error and are automatically found. The method is illustrated by simple examples. Source code in FORTRAN is provided
Both the nursing staff shortage and the need for precise control in the administration of dangerous drugs intra- venously have led to the development of various devices to achieve an automatic system. The continuous automatic control of the drip rate eliminates errors due to any physical effect such as movement of the ...
Burelli, Paolo; Preuss, Mike
Automatically generating computer animations is a challenging and complex problem with applications in games and film production. In this paper, we investigate howto translate a shot list for a virtual scene into a series of virtual camera configurations — i.e automatically controlling the virtual...
We are providing this final memorandum report for your information and use. This report discusses the efforts to achieve commonality in standards among the Military Departments as part of the DoD policy for automatic test systems (ATS...
This paper focuses on automatic requirements traceability and algorithms that automatically find recommendation links for requirements. The main objective of this paper is the evaluation of these algorithms and preparation of the method defining algorithms to be used in different cases. This paper presents and examines probabilistic, vector space and latent semantic indexing models of information retrieval and association rule mining using authors own implementations of these algorithms and o...
This book tells of method of position determination and characteristic, control method of position determination and point of design, point of sensor choice for position detector, position determination of digital control system, application of clutch break in high frequency position determination, automation technique of position determination, position determination by electromagnetic clutch and break, air cylinder, cam and solenoid, stop position control of automatic guide vehicle, stacker crane and automatic transfer control.
Torres Moreno, Juan Manuel
This new textbook examines the motivations and the different algorithms for automatic document summarization (ADS). We performed a recent state of the art. The book shows the main problems of ADS, difficulties and the solutions provided by the community. It presents recent advances in ADS, as well as current applications and trends. The approaches are statistical, linguistic and symbolic. Several exemples are included in order to clarify the theoretical concepts. The books currently available in the area of Automatic Document Summarization are not recent. Powerful algorithms have been develop
on the scanners, and to improve the computer-aided diagnosis (CAD) in ultrasound by introducing new quantitative measures. Thus, four major issues concerning automation of the medical ultrasound are addressed in this PhD project. They touch upon gain adjustments in ultrasound, automatic synthetic aperture image...... on the user adjustments on the scanner interface to optimize the scan settings. This explains the huge interest in the subject of this PhD project entitled “AUTOMATIC ULTRASOUND SCANNING”. The key goals of the project have been to develop automated techniques to minimize the unnecessary settings...
A grapple for handling nuclear reactor components in a medium such as liquid sodium which, upon proper seating and alignment of the grapple with the component as sensed by a mechanical logic integral to the grapple, automatically seizes the component. The mechanical logic system also precludes seizure in the absence of proper seating and alignment. (author)
Grana, Paul [Folsom Labs, Inc., San Francisco, CA (United States)
Final report for Folsom Labs’ Solar Permit Generator project, which has successfully completed, resulting in the development and commercialization of a software toolkit within the cloud-based HelioScope software environment that enables solar engineers to automatically generate and manage draft documents for permit submission.
One way to analyse programs is to to derive expressions for their computational behaviour. A time bound function (or worst-case complexity) gives an upper bound for the computation time as a function of the size of input. We describe a system to derive such time bounds automatically using abstrac...
Our book introduces a method to evaluate the accuracy of trend estimation algorithms under conditions similar to those encountered in real time series processing. This method is based on Monte Carlo experiments with artificial time series numerically generated by an original algorithm. The second part of the book contains several automatic algorithms for trend estimation and time series partitioning. The source codes of the computer programs implementing these original automatic algorithms are given in the appendix and will be freely available on the web. The book contains clear statement of the conditions and the approximations under which the algorithms work, as well as the proper interpretation of their results. We illustrate the functioning of the analyzed algorithms by processing time series from astrophysics, finance, biophysics, and paleoclimatology. The numerical experiment method extensively used in our book is already in common use in computational and statistical physics.
Automatic Program Development is a tribute to Robert Paige (1947-1999), our accomplished and respected colleague, and moreover our good friend, whose untimely passing was a loss to our academic and research community. We have collected the revised, updated versions of the papers published in his ...... a renewed stimulus for continuing and deepening Bob's research visions. A familiar touch is given to the book by some pictures kindly provided to us by his wife Nieba, the personal recollections of his brother Gary and some of his colleagues and friends....... honor in the Higher-Order and Symbolic Computation Journal in the years 2003 and 2005. Among them there are two papers by Bob: (i) a retrospective view of his research lines, and (ii) a proposal for future studies in the area of the automatic program derivation. The book also includes some papers...
Tudoran, Ana Alina; Olsen, Svein Ottar
This study addresses the quasi-moderating role of habit strength in explaining action loyalty. A model of loyalty behaviour is proposed that extends the traditional satisfaction–intention–action loyalty network. Habit strength is conceptualised as a cognitive construct to refer to the psychological...... aspects of the construct, such as routine, inertia, automaticity, or very little conscious deliberation. The data consist of 2962 consumers participating in a large European survey. The results show that habit strength significantly moderates the association between satisfaction and action loyalty, and......, respectively, between intended loyalty and action loyalty. At high levels of habit strength, consumers are more likely to free up cognitive resources and incline the balance from controlled to routine and automatic-like responses....
Mueller Loose, Simone
Consumers' food decisions are to a large extent shaped by automatic processes, which are either internally directed through learned habits and routines or externally influenced by context factors and visual information triggers. Innovative research methods such as eye tracking, choice experiments...... and food diaries allow us to better understand the impact of unconscious processes on consumers' food choices. Simone Mueller Loose will provide an overview of recent research insights into the effects of habit and context on consumers' food choices....
hundreds guish one language from another. The reader is referred of input languages would need to be supported , the cost of to the linguistics literature...eventually obtained bet- 108 TRAINING FRENCH GERMAN ITRAIING FRENCH M- ALGORITHM - __ GERMAN NHSPANISH TRAINING SPEECH SET OF MODELS: UTTERANCES ONE MODEL...i.e. vowels ) for each speech utterance are located malized to be insensitive to overall amplitude, pitch and automatically. Next, feature vectors
Becker, Friedhelm; Meier, Gerd E. A.; Wegner, Horst
A system for the automatic evaluation of interference patterns has been developed. After digitizing the interferograms from classical and holografic interferometers with a television digitizer and performing different picture enhancement operations the fringe loci are extracted by use of a floating-threshold method. The fringes are numbered using a special scheme after the removal of any fringe disconnections which might appear if there was insufficient contrast in the interferograms. The reconstruction of the object function from the numbered fringe field is achieved by a local polynomial least-squares approximation. Applications are given, demonstrating the evaluation of interferograms of supersonic flow fields and the analysis of holografic interferograms of car-tyres.
Valeyre, J.; Deltour, G.; Delisle, M.J.; Bouchard, A.
Renal scintigraphy data may be analyzed automatically by the use of a processing system coupled to an Anger camera (TRIDAC-MULTI 8 or CINE 200). The computing sequence is as follows: normalization of the images; background noise subtraction on both images; evaluation of mercury 197 uptake by the liver and spleen; calculation of the activity fractions on each kidney with respect to the injected dose, taking into account the kidney depth and the results referred to normal values; edition of the results. Automation minimizes the scattering parameters and by its simplification is a great asset in routine work [fr
A measuring system is described for surveying and very accurately positioning objects with respect to a reference line. A principle use of this surveying system is for accurately aligning the electromagnets which direct a particle beam emitted from a particle accelerator. Prior art surveying systems require highly skilled surveyors. Prior art systems include, for example, optical surveying systems which are susceptible to operator reading errors, and celestial navigation-type surveying systems, with their inherent complexities. The present invention provides an automatic readout micrometer which can very accurately measure distances. The invention has a simplicity of operation which practically eliminates the possibilities of operator optical reading error, owning to the elimination of traditional optical alignments for making measurements. The invention has an extendable arm which carries a laser surveying target. The extendable arm can be continuously positioned over its entire length of travel by either a coarse of fine adjustment without having the fine adjustment outrun the coarse adjustment until a reference laser beam is centered on the target as indicated by a digital readout. The length of the micrometer can then be accurately and automatically read by a computer and compared with a standardized set of alignment measurements. Due to its construction, the micrometer eliminates any errors due to temperature changes when the system is operated within a standard operating temperature range.
Lattin, Kenneth R.
United Nuclear Industries, Inc. (UNI) has developed an automatic personnel contamination monitor (APCM), which uniquely combines the design features of both portal and hand and shoe monitors. In addition, this prototype system also has a number of new features, including: micro computer control and readout, nineteen large area gas flow detectors, real-time background compensation, self-checking for system failures, and card reader identification and control. UNI's experience in operating the Hanford N Reactor, located in Richland, Washington, has shown the necessity of automatically monitoring plant personnel for contamination after they have passed through the procedurally controlled radiation zones. This final check ensures that each radiation zone worker has been properly checked before leaving company controlled boundaries. Investigation of the commercially available portal and hand and shoe monitors indicated that they did not have the sensitivity or sophistication required for UNI's application, therefore, a development program was initiated, resulting in the subject monitor. Field testing shows good sensitivity to personnel contamination with the majority of alarms showing contaminants on clothing, face and head areas. In general, the APCM has sensitivity comparable to portal survey instrumentation. The inherit stand-in, walk-on feature of the APCM not only makes it easy to use, but makes it difficult to bypass. (author)
In this work we study two-person reachability games on finite and infinite automatic graphs. For the finite case we empirically show that automatic game encodings are competitive to well-known symbolic techniques such as BDDs, SAT and QBF formulas. For the infinite case we present a novel algorithm utilizing algorithmic learning techniques, which allows to solve huge classes of automatic reachability games.
Deliant, J.D.; Jahnke, S.; Raimondo, E.
The object of this paper is to present the automatic tester of reactor protection systems designed and developed by EDF and Framatome. In order, the following points are discussed: . The necessity for reactor protection system testing, . The drawbacks of manual testing, . The description and use of the Framatome automatic tester, . On-site installation of this system, . The positive results obtained using the Framatome automatic tester in France
Barbe, A; Haeseler, F von
Automatic sets D part of Z m are characterized by having a finite number of decimations. They are equivalently generated by fixed points of certain substitution systems, or by certain finite automata. As examples, two-dimensional versions of the Thue-Morse, Baum-Sweet, Rudin-Shapiro and paperfolding sequences are presented. We give a necessary and sufficient condition for an automatic set D part of Z m to be a Delone set in R m . The result is then extended to automatic sets that are defined as fixed points of certain substitutions. The morphology of automatic sets is discussed by means of examples
Barcelos, E.J.B.V.; Ambrozio Filho, F.; Cunha, R.C.
The quantitative determination of metallographic parameters is analysed through the description of Micro-Videomat automatic image analysis system and volumetric percentage of perlite in nodular cast irons, porosity and average grain size in high-density sintered pellets of UO 2 , and grain size of ferritic steel. Techniques adopted are described and results obtained are compared with the corresponding ones by the direct counting process: counting of systematic points (grid) to measure volume and intersections method, by utilizing a circunference of known radius for the average grain size. The adopted technique for nodular cast iron resulted from the small difference of optical reflectivity of graphite and perlite. Porosity evaluation of sintered UO 2 pellets is also analyzed [pt
Extruded aluminum-clad uranium-aluminum alloy fuel tubes must pass many quality control tests before irradiation in Savannah River Plant nuclear reactors. Nondestructive test equipment has been built to automatically detect high and low density areas in the fuel tubes using x-ray absorption techniques with a video analysis system. The equipment detects areas as small as 0.060-in. dia with 2 percent penetrameter sensitivity. These areas are graded as to size and density by an operator using electronic gages. Video image enhancement techniques permit inspection of ribbed cylindrical tubes and make possible the testing of areas under the ribs. Operation of the testing machine, the special low light level television camera, and analysis and enhancement techniques are discussed
Full Text Available Procedural modeling has proven to be a very valuable tool in the ﬁeld of architecture. In the last few years, research has soared to automatically create procedural models from images. However, current algorithms for this process of inverse procedural modeling rely on the assumption that the building style is known. So far, the determination of the building style has remained a manual task. In this paper, we propose an algorithm which automates this process through classiﬁcation of architectural styles from facade images. Our classiﬁer ﬁrst identiﬁes the images containing buildings, then separates individual facades within an image and determines the building style. This information could then be used to initialize the building reconstruction process. We have trained our classiﬁer to distinguish between several distinct architectural styles, namely Flemish Renaissance, Haussmannian and Neoclassical. Finally, we demonstrate our approach on various street-side images.
In order to investigate the feasibility of automatic surveying methods in a more systematic manner, the PEP organization signed a contract in late 1975 for TRW Systems Group to undertake a feasibility study. The completion of this study resulted in TRW Report 6452.10-75-101, dated December 29, 1975, which was largely devoted to an analysis of a survey system based on an Inertial Navigation System. This PEP note is a review and, in some instances, an extension of that TRW report. A second survey system which employed an ''Image Processing System'' was also considered by TRW, and it will be reviewed in the last section of this note. 5 refs., 5 figs., 3 tabs
Yahaya, Muhammad Rizuwan; Hj Razali, Mohd Hudzari; Abu Bakar, Che Abdullah; Ismail, Wan Ishak Wan; Muda, Wan Musa Wan; Mat, Nashriyah; Zakaria, Abd
This alkaloid automated removal machine was developed at Instrumentation Laboratory, Universiti Sultan Zainal Abidin Malaysia that purposely for removing the alkaloid toxicity from Dioscorea hispida (DH) tuber. It is a poisonous plant where scientific study has shown that its tubers contain toxic alkaloid constituents, dioscorine. The tubers can only be consumed after it poisonous is removed. In this experiment, the tubers are needed to blend as powder form before inserting into machine basket. The user is need to push the START button on machine controller for switching the water pump ON by then creating turbulence wave of water in machine tank. The water will stop automatically by triggering the outlet solenoid valve. The powders of tubers are washed for 10 minutes while 1 liter of contaminated water due toxin mixture is flowing out. At this time, the controller will automatically triggered inlet solenoid valve and the new water will flow in machine tank until achieve the desire level that which determined by ultra sonic sensor. This process will repeated for 7 h and the positive result is achieved and shows it significant according to the several parameters of biological character ofpH, temperature, dissolve oxygen, turbidity, conductivity and fish survival rate or time. From that parameter, it also shows the positive result which is near or same with control water and assuming was made that the toxin is fully removed when the pH of DH powder is near with control water. For control water, the pH is about 5.3 while water from this experiment process is 6.0 and before run the machine the pH of contaminated water is about 3.8 which are too acid. This automated machine can save time for removing toxicity from DH compared with a traditional method while less observation of the user.
Visser, Michiel; Poel, Mannes; Nijholt, Antinus; Matousek, Vaclav; Mautner, Pavel; Ocelikovi, Jana; Sojka, Petr
Automatic lipreading is automatic speech recognition that uses only visual information. The relevant data in a video signal is isolated and features are extracted from it. From a sequence of feature vectors, where every vector represents one video image, a sequence of higher level semantic elements
During mammography without intensifying screens, exposure measurements are carried out behind the film. It is, however, difficult to construct an absolutely shadow-free ionization chamber of adequate sensitivity working in the necessary range of 25 to 50 kV. Repeated attempts have been made to utilize the advantages of automatic exposure for xero-mammography. In this case also the ionization chamber was placed behind the Xerox plate. Depending on tube filtration, object thickness and tube voltage, more than 80%, sometimes even 90%, of the radiation is absorbed by the Xerox plate. Particularly the characteristic Mo radiation of 17.4 keV and 19.6 keV is almost totally absorbed by the plate and cannot therefore be registered by the ionization chamber. This results in a considerable dependence of the exposure on kV and object thickness. Dependence on tube voltage and object thickness have been examined dosimetrically and spectroscopically with a Ge(Li)-spectrometer. Finally, the successful use of a shadow-free chamber is described; this has been particularly adapted for xero-mammography and is placed in front of the plate. (orig) [de
ContentsIntroduction1. EDP Accounting and Automatic Journalizing2. Learning System of Automatic Journalizing3. Automatic Journalizing by the Artificial Intelligence4. Direction of the Progress of the Accounting Information System
Polonnikov, D Ye
Electronic Amplifiers for Automatic Compensators presents the design and operation of electronic amplifiers for use in automatic control and measuring systems. This book is composed of eight chapters that consider the problems of constructing input and output circuits of amplifiers, suppression of interference and ensuring high sensitivity.This work begins with a survey of the operating principles of electronic amplifiers in automatic compensator systems. The succeeding chapters deal with circuit selection and the calculation and determination of the principal characteristics of amplifiers, as
AMI) meeting corpus, the development of a meeting speech recognition system, and systems for the automatic segmentation, summarization and social processing of meetings, together with some example applications based on these systems.
.... Automatic generation offers great flexibility in performing data and information analysis tasks, because new designs are generated on a case by case basis to suit current and changing future needs...
TeGrotenhuis, Ward E.
Volume 2: Improved Sensor and Control Designs Many residential clothes dryers on the market today provide automatic cycles that are intended to stop when the clothes are dry, as determined by the final remaining moisture content (RMC). However, testing of automatic termination cycles has shown that many dryers are susceptible to over-drying of loads, leading to excess energy consumption. In particular, tests performed using the DOE Test Procedure in Appendix D2 of 10 CFR 430 subpart B have shown that as much as 62% of the energy used in a cycle may be from over-drying. Volume 1 of this report shows an average of 20% excess energy from over-drying when running automatic cycles with various load compositions and dryer settings. Consequently, improving automatic termination sensors and algorithms has the potential for substantial energy savings in the U.S.
Full Text Available Our paper focuses on the graphical analysis domain. We propose an automatic image recognition technique. This approach consists of two main pattern recognition steps. First, it performs an image feature extraction operation on an input image set, using statistical dispersion features. Then, an unsupervised classification process is performed on the previously obtained graphical feature vectors. An automatic region-growing based clustering procedure is proposed and utilized in the classification stage.
This manual describes and provides trouble-shooting aids for the Automatic Sample Changer electronics on the automatic beta counting system, developed by the Los Alamos Scientific Laboratory Group CNC-11. The output of a gas detector is shaped by a preamplifier, then is coupled to an amplifier. Amplifier output is discriminated and is the input to a scaler. An identification number is associated with each sample. At a predetermined count length, the identification number, scaler data plus other information is punched out on a data card. The next sample to be counted is automatically selected. The beta counter uses the same electronics as the prior count did, the only difference being the sample identification number and sample itself. This manual is intended as a step-by-step aid in trouble-shooting the electronics associated with positioning the sample, counting the sample, and getting the needed data punched on an 80-column data card
A self-designed automatic scaler is introduced. A microcontroller LPC936 is used as the master chip in the scaler. A counter integrated with the micro-controller is configured to operate as external pulse counter. Software employed in the scaler is based on a embedded real-time operating system kernel named Small RTOS. Data storage, calculation and some other functions are also provided. The scaler is designed for applications with low cost, low power consumption solutions. By now, the automatic scaler has been applied in a surface contamination instrument. (authors)
Annual Review in Automatic Programming focuses on the techniques of automatic programming used with digital computers. Topics covered range from the design of machine-independent programming languages to the use of recursive procedures in ALGOL 60. A multi-pass translation scheme for ALGOL 60 is described, along with some commercial source languages. The structure and use of the syntax-directed compiler is also considered.Comprised of 12 chapters, this volume begins with a discussion on the basic ideas involved in the description of a computing process as a program for a computer, expressed in
An exposition of reasons why a system of automatic translation could not use a terminology bank except as a source of information. The fundamental difference between the two tools is explained and examples of translation and mistranslation are given as evidence of the limits and possibilities of each process. (Text is in French.) (AMH)
Bisht, Prithvi; Sistla, A. Prasad; Venkatakrishnan, V. N.
We present the first sound program source transformation approach for automatically transforming the code of a legacy web application to employ PREPARE statements in place of unsafe SQL queries. Our approach therefore opens the way for eradicating the SQL injection threat vector from legacy web applications.
Bodei, Chiara; Buchholtz, Mikael; Degano, Pierpablo
We perform a systematic expansion of protocol narrations into terms of a process algebra in order to make precise some of the detailed checks that need to be made in a protocol. We then apply static analysis technology to develop an automatic validation procedure for protocols. Finally, we...
The automatic measurement of targets is demonstrated by means of a theoretical example and by an interactive measuring program for real imagery from a réseau camera. The used strategy is a combination of two methods: the maximum correlation coefficient and the correlation in the subpixel range...... interactive software is also part of a computer-assisted learning program on digital photogrammetry....
Rothwell, E. J.; Cloud, M. J.
A technique for automatic error analysis using interval mathematics is introduced. A comparison to standard error propagation methods shows that in cases involving complicated formulas, the interval approach gives comparable error estimates with much less effort. Several examples are considered, and numerical errors are computed using the INTLAB…
Rolnick, Joshua; Parvizi, Josef
The law, like neurology, grapples with the relationship between disease states and behavior. Sometimes, the two disciplines share the same terminology, such as automatism. In law, the "automatism defense" is a claim that action was involuntary or performed while unconscious. Someone charged with a serious crime can acknowledge committing the act and yet may go free if, relying on the expert testimony of clinicians, the court determines that the act of crime was committed in a state of automatism. In this review, we explore the relationship between the use of automatism in the legal and clinical literature. We close by addressing several issues raised by the automatism defense: semantic ambiguity surrounding the term automatism, the presence or absence of consciousness during automatisms, and the methodological obstacles that have hindered the study of cognition during automatisms. Copyright © 2010 Elsevier Inc. All rights reserved.
The aim of this research is to examine the relationships between self-compassion and automatic thoughts. Participants were 299 university students. In this study, the Self-compassion Scale and the Automatic Thoughts Questionnaire were used. The relationships between self-compassion and automatic thoughts were examined using correlation analysis…
Brun, R.; Rademakers, F.
ROOT version 3 (spring 2001) supports automatic class schema evolution. In addition this version also produces files that are self-describing. This is achieved by storing in each file a record with the description of all the persistent classes in the file. Being self-describing guarantees that a file can always be read later, its structure browsed and objects inspected, also when the library with the compiled code of these classes is missing. The schema evolution mechanism supports the frequent case when multiple data sets generated with many different class versions must be analyzed in the same session. ROOT supports the automatic generation of C++ code describing the data objects in a file
Jahanian, Ali; Liu, Jerry; Tretter, Daniel R.; Lin, Qian; Damera-Venkata, Niranjan; O'Brien-Strain, Eamonn; Lee, Seungyon; Fan, Jian; Allebach, Jan P.
In this paper, we propose a system for automatic design of magazine covers that quantifies a number of concepts from art and aesthetics. Our solution to automatic design of this type of media has been shaped by input from professional designers, magazine art directors and editorial boards, and journalists. Consequently, a number of principles in design and rules in designing magazine covers are delineated. Several techniques are derived and employed in order to quantify and implement these principles and rules in the format of a software framework. At this stage, our framework divides the task of design into three main modules: layout of magazine cover elements, choice of color for masthead and cover lines, and typography of cover lines. Feedback from professional designers on our designs suggests that our results are congruent with their intuition.
Toyota, Takayoshi; Kudo, Mikihiko; Abe, Kanji; Kawamata, Fumiaki; Uehata, Shigeru.
Radioimmunoassay provided dose response curves which showed linearity by the use of logistic transformation (Rodbard). This transformation which was applicable to radioimmunoassay should be useful for the computer processing of insulin and C-peptide assay. In the present studies, standard curves were analysed by testing the fit of analytic functions to radioimmunoassay of insulin and C-peptides. A program for use in combination with the double antibody technique was made by Dr. Kawamata. This approach was evidenced to be useful in order to allow automatic computation of data derived from the double antibody assays of insulin and C-peptides. Automatic corrected calculations of radioimmunoassay data of insulin was found to be satisfactory. (auth.)
Physics of Automatic Target Recognition addresses the fundamental physical bases of sensing, and information extraction in the state-of-the art automatic target recognition field. It explores both passive and active multispectral sensing, polarimetric diversity, complex signature exploitation, sensor and processing adaptation, transformation of electromagnetic and acoustic waves in their interactions with targets, background clutter, transmission media, and sensing elements. The general inverse scattering, and advanced signal processing techniques and scientific evaluation methodologies being used in this multi disciplinary field will be part of this exposition. The issues of modeling of target signatures in various spectral modalities, LADAR, IR, SAR, high resolution radar, acoustic, seismic, visible, hyperspectral, in diverse geometric aspects will be addressed. The methods for signal processing and classification will cover concepts such as sensor adaptive and artificial neural networks, time reversal filt...
李, 田茂; 中田, 辰則; 松本, 寛樹
Abstract ###Automatic tuning circuit adjusts frequency performance to compensate for the process variation. Phase locked ###loop (PLL) is a suitable oscillator for the integrated circuit. It is a feedback system that compares the input ###phase with the output phase. It can make the output frequency equal to the input frequency. In this paper, PLL ###fomed of MOSFET's is presented.The presented circuit consists of XOR circuit, Low-pass filter and Relaxation ###Oscillator. On PSPICE simulation...
Pérez-Rosas, Verónica; Kleinberg, Bennett; Lefevre, Alexandra; Mihalcea, Rada
The proliferation of misleading information in everyday access media outlets such as social media feeds, news blogs, and online newspapers have made it challenging to identify trustworthy news sources, thus increasing the need for computational tools able to provide insights into the reliability of online content. In this paper, we focus on the automatic identification of fake content in online news. Our contribution is twofold. First, we introduce two novel datasets for the task of fake news...
Organized around an A2 type controller, this CAMAC device allows on command of the associated computer to start reading 64K 16 bit words into an outer memory. This memory is fully controlled by the computer. In the automatic mode, which works at 10 6 words/sec, the computer can access any other module of the same crate by cycle-stealing [fr
Johnston, A. R.
Position sensor and mirror guides manipulator toward object. Grasping becomes automatic when sensor begins to receive signal from reflector on object to be manipulated. Light-emitting diodes on manipulator produce light signals for reflector, which is composite of plane and corner reflectors. Proposed scheme especially useful when manipulator arm tends to flex or when object is moving. Sensor and microprocessor designed to compensate for manipulatorarm oscillation.
Halpern, Mark I; Bolliet, Louis
Computer Science and Technology and their Application is an eight-chapter book that first presents a tutorial on database organization. Subsequent chapters describe the general concepts of Simula 67 programming language; incremental compilation and conversational interpretation; dynamic syntax; the ALGOL 68. Other chapters discuss the general purpose conversational system for graphical programming and automatic theorem proving based on resolution. A survey of extensible programming language is also shown.
Purves, L.; Clerman, N.
Software produces cutter location files for numerically-controlled machine tools. APT, acronym for Automatically Programed Tools, is among most widely used software systems for computerized machine tools. APT developed for explicit purpose of providing effective software system for programing NC machine tools. APT system includes specification of APT programing language and language processor, which executes APT statements and generates NC machine-tool motions specified by APT statements.
Atcitty, Stanley; Watson, Luke Dale
Technologies pertaining to the automatic computation of transfer functions for a physical system are described herein. The physical system is one of an electrical system, a mechanical system, an electromechanical system, an electrochemical system, or an electromagnetic system. A netlist in the form of a matrix comprises data that is indicative of elements in the physical system, values for the elements in the physical system, and structure of the physical system. Transfer functions for the physical system are computed based upon the netlist.
Apostolova, Emilia; Channin, David S; Demner-Fushman, Dina; Furst, Jacob; Lytinen, Steven; Raicu, Daniela
Clinical narratives, such as radiology and pathology reports, are commonly available in electronic form. However, they are also commonly entered and stored as free text. Knowledge of the structure of clinical narratives is necessary for enhancing the productivity of healthcare departments and facilitating research. This study attempts to automatically segment medical reports into semantic sections. Our goal is to develop a robust and scalable medical report segmentation system requiring minimum user input for efficient retrieval and extraction of information from free-text clinical narratives. Hand-crafted rules were used to automatically identify a high-confidence training set. This automatically created training dataset was later used to develop metrics and an algorithm that determines the semantic structure of the medical reports. A word-vector cosine similarity metric combined with several heuristics was used to classify each report sentence into one of several pre-defined semantic sections. This baseline algorithm achieved 79% accuracy. A Support Vector Machine (SVM) classifier trained on additional formatting and contextual features was able to achieve 90% accuracy. Plans for future work include developing a configurable system that could accommodate various medical report formatting and content standards.
Schachter, Bruce J.
The subject being addressed is how an automatic target tracker (ATT) and an automatic target recognizer (ATR) can be fused together so tightly and so well that their distinctiveness becomes lost in the merger. This has historically not been the case outside of biology and a few academic papers. The biological model of ATT∪ATR arises from dynamic patterns of activity distributed across many neural circuits and structures (including retina). The information that the brain receives from the eyes is "old news" at the time that it receives it. The eyes and brain forecast a tracked object's future position, rather than relying on received retinal position. Anticipation of the next moment - building up a consistent perception - is accomplished under difficult conditions: motion (eyes, head, body, scene background, target) and processing limitations (neural noise, delays, eye jitter, distractions). Not only does the human vision system surmount these problems, but it has innate mechanisms to exploit motion in support of target detection and classification. Biological vision doesn't normally operate on snapshots. Feature extraction, detection and recognition are spatiotemporal. When vision is viewed as a spatiotemporal process, target detection, recognition, tracking, event detection and activity recognition, do not seem as distinct as they are in current ATT and ATR designs. They appear as similar mechanism taking place at varying time scales. A framework is provided for unifying ATT and ATR.
Annual Review in Automatic Programming, Volume 4 is a collection of papers that deals with the GIER ALGOL compiler, a parameterized compiler based on mechanical linguistics, and the JOVIAL language. A couple of papers describes a commercial use of stacks, an IBM system, and what an ideal computer program support system should be. One paper reviews the system of compilation, the development of a more advanced language, programming techniques, machine independence, and program transfer to other machines. Another paper describes the ALGOL 60 system for the GIER machine including running ALGOL pro
Full Text Available An important task of developing machine translation (MT is evaluating system performance. Automatic measures are most commonly used for this task, as manual evaluation is time-consuming and costly. However, to perform an objective evaluation is not a trivial task. Automatic measures, such as BLEU, TER, NIST, METEOR etc., have their own weaknesses, while manual evaluations are also problematic since they are always to some extent subjective. In this paper we test the influence of a test set on the results of automatic MT evaluation for the subtitling domain. Translating subtitles is a rather specific task for MT, since subtitles are a sort of summarization of spoken text rather than a direct translation of (written text. Additional problem when translating language pair that does not include English, in our example Slovene-Serbian, is that commonly the translations are done from English to Serbian and from English to Slovenian, and not directly, since most of the TV production is originally filmed in English. All this poses additional challenges to MT and consequently to MT evaluation. Automatic evaluation is based on a reference translation, which is usually taken from an existing parallel corpus and marked as a test set. In our experiments, we compare the evaluation results for the same MT system output using three types of test set. In the first round, the test set are 4000 subtitles from the parallel corpus of subtitles SUMAT. These subtitles are not direct translations from Serbian to Slovene or vice versa, but are based on an English original. In the second round, the test set are 1000 subtitles randomly extracted from the first test set and translated anew, from Serbian to Slovenian, based solely on the Serbian written subtitles. In the third round, the test set are the same 1000 subtitles, however this time the Slovene translations were obtained by manually correcting the Slovene MT outputs so that they are correct translations of the
Martinez, Mercedes Garcia; Koglin, Arlene; Mesa-Lao, Bartolomé
of quality criteria in as few edits as possible. The quality of MT systems is generally measured by automatic metrics, producing scores that should correlate with human evaluation.In this study, we investigate correlations between one of such metrics, i.e. Translation Edit Rate (TER), and actual post...... of post-editing effort, namely i) temporal (time), ii) cognitive (mental processes) and iii) technical (keyboard activity). For the purposes of this research, TER scores were correlated with two different indicators of post-editing effort as computed in the CRITT Translation Process Database (TPR...
Annual Review in Automatic Programming, Volume 2 is a collection of papers that discusses the controversy about the suitability of COBOL as a common business oriented language, and the development of different common languages for scientific computation. A couple of papers describes the use of the Genie system in numerical calculation and analyzes Mercury autocode in terms of a phrase structure language, such as in the source language, target language, the order structure of ATLAS, and the meta-syntactical language of the assembly program. Other papers explain interference or an ""intermediate
We develop a coordinated hybrid automatic repeat request (HARQ) approach. With the proposed scheme, if a user message is correctly decoded in the first HARQ rounds, its spectrum is allocated to other users, to improve the network outage probability and the users\\' fairness. The results, which are obtained for single- and multiple-antenna setups, demonstrate the efficiency of the proposed approach in different conditions. For instance, with a maximum of M retransmissions and single transmit/receive antennas, the diversity gain of a user increases from M to (J+1)(M-1)+1 where J is the number of users helping that user.
Wu, Tao; Hallett, Mark; Chan, Piu
Bradykinesia is the most important feature contributing to motor difficulties in Parkinson’s disease (PD). However, the pathophysiology underlying bradykinesia is not fully understood. One important aspect is that PD patients have difficulty in performing learned motor skills automatically, but this problem has been generally overlooked. Here we review motor automaticity associated motor deficits in PD, such as reduced arm swing, decreased stride length, freezing of gait, micrographia and reduced facial expression. Recent neuroimaging studies have revealed some neural mechanisms underlying impaired motor automaticity in PD, including less efficient neural coding of movement, failure to shift automated motor skills to the sensorimotor striatum, instability of the automatic mode within the striatum, and use of attentional control and/or compensatory efforts to execute movements usually performed automatically in healthy people. PD patients lose previously acquired automatic skills due to their impaired sensorimotor striatum, and have difficulty in acquiring new automatic skills or restoring lost motor skills. More investigations on the pathophysiology of motor automaticity, the effect of L-dopa or surgical treatments on automaticity, and the potential role of using measures of automaticity in early diagnosis of PD would be valuable. PMID:26102020
Amirsolaimani, Babak; Peyghambarian, N.; Schwiegerling, Jim; Bablumyan, Arkady; Savidis, Nickolaos; Peyman, Gholam
Phoropters are the most common instrument used to detect refractive errors. During a refractive exam, lenses are flipped in front of the patient who looks at the eye chart and tries to read the symbols. The procedure is fully dependent on the cooperation of the patient to read the eye chart, provides only a subjective measurement of visual acuity, and can at best provide a rough estimate of the patient's vision. Phoropters are difficult to use for mass screenings requiring a skilled examiner, and it is hard to screen young children and the elderly etc. We have developed a simplified, lightweight automatic phoropter that can measure the optical error of the eye objectively without requiring the patient's input. The automatic holographic adaptive phoropter is based on a Shack-Hartmann wave front sensor and three computercontrolled fluidic lenses. The fluidic lens system is designed to be able to provide power and astigmatic corrections over a large range of corrections without the need for verbal feedback from the patient in less than 20 seconds.
Yoshida, Kazuhiro; Koyama, Takaichi; Iizuka, Tomio; Ito, Yoshitoshi; Takami, Katsumi.
A remotely controlled automatic special welding machine for piping was developed. This machine is utilized for long distance pipe lines, chemical plants, thermal power generating plants and nuclear power plants effectively from the viewpoint of good quality control, reduction of labor and good controllability. The function of this welding machine is to inspect the shape and dimensions of edge preparation before welding work by the sense of touch, to detect the temperature of melt pool, inspect the bead form by the sense of touch, and check the welding state by ITV during welding work, and to grind the bead surface and inspect the weld metal by ultrasonic test automatically after welding work. The construction of this welding system, the main specification of the apparatus, the welding procedure in detail, the electrical source of this welding machine, the cooling system, the structure and handling of guide ring, the central control system and the operating characteristics are explained. The working procedure and the effect by using this welding machine, and the application to nuclear power plants and the other industrial field are outlined. The HIDIC 08 is used as the controlling computer. This welding machine is useful for welding SUS piping as well as carbon steel piping. (Nakai, Y.)
Automatic handling device for the steam relief valves (SRV's) is developed in order to achieve a decrease in exposure of workers, increase in availability factor, improvement in reliability, improvement in safety of operation, and labor saving. A survey is made during a periodical inspection to examine the actual SVR handling operation. An SRV automatic handling device consists of four components: conveyor, armed conveyor, lifting machine, and control/monitoring system. The conveyor is so designed that the existing I-rail installed in the containment vessel can be used without any modification. This is employed for conveying an SRV along the rail. The armed conveyor, designed for a box rail, is used for an SRV installed away from the rail. By using the lifting machine, an SRV installed away from the I-rail is brought to a spot just below the rail so that the SRV can be transferred by the conveyor. The control/monitoring system consists of a control computer, operation panel, TV monitor and annunciator. The SRV handling device is operated by remote control from a control room. A trial equipment is constructed and performance/function testing is carried out using actual SRV's. As a result, is it shown that the SRV handling device requires only two operators to serve satisfactorily. The required time for removal and replacement of one SRV is about 10 minutes. (Nogami, K.)
D'Ambrosio, N.; Mandrioli, G.; Sirrib, G.
The use of nuclear emulsions in recent large neutrino experiments is mostly due to the significant results in the developments of this detection technique. In the emulsion films, trajectories of through-going particles are permanently recorded: thus, the emulsion target can be considered not only as a tracking but also as a storing device. If the data readout is performed by automatic scanning systems interfaced to an acquisition computer equipped with a fast frame grabber, nuclear emulsions can be used as very large target detector and quickly analyzed in particle physics experiments. Techniques for automatic scanning of nuclear emulsions have been developed in the early past. The effort was initiated by Niwa at Nagoya (Japan) in the late 70s. The first large-scale application was the CHORUS experiment; then emulsions have been used to search for T neutrinos in a high track density environment like DONUT. In order to measure with high accuracy and high speed, very strict constraints must be satisfied in terms of mechanical precisions, camera speed, image processing power. Recent improvements in this technique are briefly reported
We present a novel framework for the automatic generation of tourist brochures that include routing instructions and additional information presented in the form of so-called detail lenses. The first contribution of this paper is the automatic creation of layouts for the brochures. Our approach is based on the minimization of an energy function that combines multiple goals: positioning of the lenses as close as possible to the corresponding region shown in an overview map, keeping the number of lenses low, and an efficient numbering of the lenses. The second contribution is a route-aware simplification of the graph of streets used for traveling between the points of interest (POIs). This is done by reducing the graph consisting of all shortest paths through the minimization of an energy function. The output is a subset of street segments that enable traveling between all the POIs without considerable detours, while at the same time guaranteeing a clutter-free visualization. © 2014 The Author(s) Computer Graphics Forum © 2014 The Eurographics Association and John Wiley & Sons Ltd. Published by John Wiley & Sons Ltd.
Automaticity, or instant recognition of combinations of letters as units of language, is essential for proficient reading in any language. The article explores automaticity amongst competent adult first-language readers of isiZulu, and the factors associated with it or its opposite - active decoding. Whilst the transparent spelling patterns of isiZulu aid learner readers, some of its orthographical features may militate against their gaining automaticity. These features are agglutination; a c...
Gutin, Mikhail; Tsui, Eddy K; Gutin, Olga; Wang, Xu-Ming; Gutin, Alexey
.... Automatic detection, location, and tracking of targets outside protected area ensures maximum protection and at the same time reduces the workload on personnel, increases reliability and confidence...
Lamargot, J.-P.; Wanin, Maurice.
This invention falls within the area of quantitative or semi-quantitative analysis by gamma spectrometry and particularly refers to a device for bringing the samples into the counting position. The purpose of this invention is precisely to provide an automatic apparatus specifically adapted to the analysis of hard gamma radiations. To this effect, the invention relates to a gamma spectrometry analytical device comprising a lead containment, a detector of which the sensitive part is located inside the containment and additionally comprising a transfer system for bringing the analyzed samples in succession to a counting position inside the containment above the detector. A feed compartment enables the samples to be brought in turn one by one on to the transfer system through a duct connecting the compartment to the transfer system. Sequential systems for the coordinated forward feed of the samples in the compartment and the transfer system complete this device [fr
, using this method has been developed. (ADIODES is an abbreviation of `` Automatic Differentiation Interval Ordinary Differential Equation Solver''). ADIODES is used to prove existence and uniqueness of periodic solutions to specific ordinary differential equations occuring in dynamical systems theory....... These proofs of existence and uniqueness are difficult or impossible to obtain using other known methods. Also, a method for solving boundary value problems is described. Finally a method for enclosing solutions to a class of integral equations is described. This method is based on the mean value enclosure...... of an integral operator and uses interval Bernstein polynomials for enclosing the solution. Two numerical examples are given, using two orders of approximation and using different numbers of discretization points....
Appert, Q.; Swann, T.; Sweatt, W.; Saxman, A.
Antares is a 24-beam-line CO 2 laser system for controlled fusion research, under construction at Los Alamos Scientific Laboratory (LASL). Rapid automatic alignment of this system is required prior to each experiment shot. The alignment requirements, operational constraints, and a developed prototype system are discussed. A visible-wavelength alignment technique is employed that uses a telescope/TV system to view point light sources appropriately located down the beamline. Auto-alignment is accomplished by means of a video centroid tracker, which determines the off-axis error of the point sources. The error is nulled by computer-driven, movable mirrors in a closed-loop system. The light sources are fiber-optic terminations located at key points in the optics path, primarily at the center of large copper mirrors, and remotely illuminated to reduce heating effects
Christoffersen, S.; Harder, Stine; Andersen, J. D.
An automatic algorithm to quantify the eye colour and structural information from standard hi-resolution photos of the human iris has been developed. Initially, the major structures in the eye region are identified including the pupil, iris, sclera, and eyelashes. Based on this segmentation, the ...... is completely data driven and it can divide a group of eye images into classes based on structure, colour or a combination of the two. The methods have been tested on a large set of photos with promising results....... regions. The result is a blue-brown ratio for each eye. Furthermore, an image clustering approach has been used with promising results. The approach is based on using a sparse dictionary of feature vectors learned from a training set of iris regions. The feature vectors contain both local structural...
Oudot, G.; Poizat, F.
SIPA, which stands for 'Simulator for Post Accident', includes: 1) a sophisticated software oriented workshop SWORD (which stands for 'Software Workshop Oriented towards Research and Development') designed in the ADA language including integrated CAD system and software tools for automatic generation of simulation software and man-machine interface in order to operate run-time simulation; 2) a 'simulator structure' based on hardware equipment and software for supervision and communications; 3) simulation configuration generated by SWORD, operated under the control of the 'simulator structure' and run on a target computer. SWORD has already been used to generate two simulation configurations (French 900 MW and 1300 MW nuclear power plants), which are now fully operational on the SIPA training simulator. (Z.S.) 1 ref
Nishikawa, K.; Fukushima, T.; Nakai, H.; Yanagisawa, A.
In BWR nuclear power stations the Traversing Incore Probe (TIP) system is one of the most important components in reactor monitoring and control. In previous TIP systems, however, operators have suffered from the complexity of operation and long operation time required. The system presented in this paper realizes the automatic operation of the TIP system by monitoring and driving it with a process computer. This system significantly reduces the burden on customer operators and improves plant efficiency by simplifying the operating procedure, augmenting the accuracy of the measured data, and shortening operating time. The process computer is one of the PODIA (Plant Operation by Displayed Information Automation) systems. This computer transfers control signals to the TIP control panel, which in turn drives equipment by microprocessor control. The process computer contains such components as the CRT/KB unit, the printer plotter, the hard copier, and the message typers required for efficient man-machine communications. Its operation and interface properties are described
Statistical learning has been getting more and more interest from the particle-physics community in recent times, with neural networks and gradient-based optimization being a focus. In this talk we shall discuss three things: automatic differention tools: tools to quickly build DAGs of computation that are fully differentiable. We shall focus on one such tool "PyTorch". Easy deployment of trained neural networks into large systems with many constraints: for example, deploying a model at the reconstruction phase where the neural network has to be integrated into CERN's bulk data-processing C++-only environment Some recent models in deep learning for segmentation and generation that might be useful for particle physics problems.
Jalba, Andrei C.; Wilkinson, Michael H.F.; Roerdink, Jos B.T.M.
A general framework for automatic segmentation of diatom images is presented. This segmentation is a critical first step in contour-based methods for automatic identification of diatoms by computerized image analysis. We review existing results, adapt popular segmentation methods to this difficult
Dindo T. Ani
Full Text Available - Automatic system has brought many revolutions in the existing technologies. One among the technologies, which has greater developments, is the solar powered automatic shrimp feeding system. For instance, the solar power which is a renewable energy can be an alternative solution to energy crisis and basically reducing man power by using it in an automatic manner. The researchers believe an automatic shrimp feeding system may help solve problems on manual feeding operations. The project study aimed to design and develop a solar powered automatic shrimp feeding system. It specifically sought to prepare the design specifications of the project, to determine the methods of fabrication and assembly, and to test the response time of the automatic shrimp feeding system. The researchers designed and developed an automatic system which utilizes a 10 hour timer to be set in intervals preferred by the user and will undergo a continuous process. The magnetic contactor acts as a switch connected to the 10 hour timer which controls the activation or termination of electrical loads and powered by means of a solar panel outputting electrical power, and a rechargeable battery in electrical communication with the solar panel for storing the power. By undergoing through series of testing, the components of the modified system were proven functional and were operating within the desired output. It was recommended that the timer to be used should be tested to avoid malfunction and achieve the fully automatic system and that the system may be improved to handle changes in scope of the project.
Petri, Stig; Immerkær, John
In the garden nursery industry providing young Nordmann firs for Christmas tree plantations, there is a rising interest in automatic classification of their products to ensure consistently high quality and reduce the cost of manual labor. This paper describes a fully automatic single-view algorithm...
Basler, G.; Sperl, H.; Weinschenk, K.
The patent describes a device for fully automatic radiographic testing of large pipes with longitudinal welds. Furthermore the invention enables automatic marking of films in radiographic inspection with regard to a ticketing of the test piece and of that part of it where testing took place. (RW) [de
Bui Huu Trung, B.H.T.; Bui, T.D.; Poel, Mannes; Heylen, Dirk K.J.; Nijholt, Antinus; Hamza, H.M.
In this paper, we introduce a novel method of automatically finding the training set of RBF networks for morphing a prototype face to represent a new face. This is done by automatically specifying and adjusting corresponding feature points on a target face. The RBF networks are then used to transfer
Weddendorf, Bruce C. (Inventor)
An articulated tang in clevis joint for incorporation in newly manufactured conventional strap-on orthotic knee devices or for replacing such joints in conventional strap-on orthotic knee devices is discussed. The instant tang in clevis joint allows the user the freedom to extend and bend the knee normally when no load (weight) is applied to the knee and to automatically lock the knee when the user transfers weight to the knee, thus preventing a damaged knee from bending uncontrollably when weight is applied to the knee. The tang in clevis joint of the present invention includes first and second clevis plates, a tang assembly and a spacer plate secured between the clevis plates. Each clevis plate includes a bevelled serrated upper section. A bevelled shoe is secured to the tank in close proximity to the bevelled serrated upper section of the clevis plates. A coiled spring mounted within an oblong bore of the tang normally urges the shoes secured to the tang out of engagement with the serrated upper section of each clevic plate to allow rotation of the tang relative to the clevis plate. When weight is applied to the joint, the load compresses the coiled spring, the serrations on each clevis plate dig into the bevelled shoes secured to the tang to prevent relative movement between the tang and clevis plates. A shoulder is provided on the tang and the spacer plate to prevent overextension of the joint.
Christoph W. Kessler
Full Text Available This article describes a knowledge-based system for automatic parallelization of a wide class of sequential numerical codes operating on vectors and dense matrices, and for execution on distributed memory message-passing multiprocessors. Its main feature is a fast and powerful pattern recognition tool that locally identifies frequently occurring computations and programming concepts in the source code. This tool also works for dusty deck codes that have been "encrypted" by former machine-specific code transformations. Successful pattern recognition guides sophisticated code transformations including local algorithm replacement such that the parallelized code need not emerge from the sequential program structure by just parallelizing the loops. It allows access to an expert's knowledge on useful parallel algorithms, available machine-specific library routines, and powerful program transformations. The partially restored program semantics also supports local array alignment, distribution, and redistribution, and allows for faster and more exact prediction of the performance of the parallelized target code than is usually possible.
Souza, P. A. de; Garg, V. K.; Klingelhoefer, G.; Gellert, R.; Guetlich, P.
A portable Moessbauer spectrometer, developed for extraterrestrial applications, opens up new industrial applications of MBS. But for industrial applications, an available tool for fast data analysis is also required, and it should be easy to handle. The analysis of Moessbauer spectra and their parameters is a barrier for the popularity of this wide-applicable spectroscopic technique in industry. Based on experience, the analysis of a Moessbauer spectrum is time-consuming and requires the dedication of a specialist. However, the analysis of Moessbauer spectra, from the fitting to the identification of the sample phases, can be faster using by genetic algorithms, fuzzy logic and artificial neural networks. Industrial applications are very specific ones and the data analysis can be performed using these algorithms. In combination with an automatic analysis, the Moessbauer spectrometer can be used as a probe instrument which covers the main industrial needs for an on-line monitoring of its products, processes and case studies. Some of these real industrial applications will be discussed.
Full Text Available Liquid Nitrogen is one of the major substance used as a chiller in industry such as Ice cream factory Milk Diary Storage of blood sample Blood Bank etc. It helps to maintain the required product at a lower temperature for preservation purpose. We cannot fully utilise the LN2 so practically if we are using 3.75 litre LN2 for a single day then around 12 of LN2 450 ml is wasted due to vaporisation. A pressure relief valve is provided to create a pressure difference. If there is no pressure difference between the cylinder carrying LN2 and its surrounding it will results in damage of container as well as wastage of LN2.Transmission of LN2 from TA55 to BA3 is carried manually .So care must be taken for the transmission of LN2 in order to avoid its wastage. With the help of this project concept the transmission of LN2 will be carried automatically so as to reduce the wastage of LN2 in case of manual operation.
Wyatt, Christopher L.; Ge, Yaorong; Vining, David J.
Virtual colonoscopy is a minimally invasive technique that enables detection of colorectal polyps and cancer. Normally, a patient's bowel is prepared with colonic lavage and gas insufflation prior to computed tomography (CT) scanning. An important step for 3D analysis of the image volume is segmentation of the colon. The high-contrast gas/tissue interface that exists in the colon lumen makes segmentation of the majority of the colon relatively easy; however, two factors inhibit automatic segmentation of the entire colon. First, the colon is not the only gas-filled organ in the data volume: lungs, small bowel, and stomach also meet this criteria. User-defined seed points placed in the colon lumen have previously been required to spatially isolate only the colon. Second, portions of the colon lumen may be obstructed by peristalsis, large masses, and/or residual feces. These complicating factors require increased user interaction during the segmentation process to isolate additional colon segments. To automate the segmentation of the colon, we have developed a method to locate seed points and segment the gas-filled lumen with no user supervision. We have also developed an automated approach to improve lumen segmentation by digitally removing residual contrast-enhanced fluid resulting from a new bowel preparation that liquefies and opacifies any residual feces.
Gutin, Mikhail A.; Tsui, Eddy K.; Gutin, Olga N.
Historically, the US Army has recognized the advantages of panoramic imagers with high image resolution: increased area coverage with fewer cameras, instantaneous full horizon detection, location and tracking of multiple targets simultaneously, extended range, and others. The novel ViperViewTM high-resolution panoramic thermal imager is the heart of the Automatic Panoramic Thermal Integrated Sensor (APTIS), being jointly developed by Applied Science Innovative, Inc. (ASI) and the Armament Research, Development and Engineering Center (ARDEC) in support of the Future Combat Systems (FCS) and the Intelligent Munitions Systems (IMS). The APTIS is anticipated to operate as an intelligent node in a wireless network of multifunctional nodes that work together to improve situational awareness (SA) in many defense and offensive operations, as well as serve as a sensor node in tactical Intelligence Surveillance Reconnaissance (ISR). The ViperView is as an aberration-corrected omnidirectional imager with small optics designed to match the resolution of a 640x480 pixels IR camera with improved image quality for longer range target detection, classification, and tracking. The same approach is applicable to panoramic cameras working in the visible spectral range. Other components of the ATPIS sensor suite include ancillary sensors, advanced power management, and wakeup capability. This paper describes the development status of the APTIS system.
Ning, Yang; Shi, Chenbo; Wang, Li; Shu, Chang
The automatic segmentation of psoriatic lesions is widely researched these years. It is an important step in Computer-aid methods of calculating PASI for estimation of lesions. Currently those algorithms can only handle single erythema or only deal with scaling segmentation. In practice, scaling and erythema are often mixed together. In order to get the segmentation of lesions area - this paper proposes an algorithm based on Random forests with color and texture features. The algorithm has three steps. The first step, the polarized light is applied based on the skin's Tyndall-effect in the imaging to eliminate the reflection and Lab color space are used for fitting the human perception. The second step, sliding window and its sub windows are used to get textural feature and color feature. In this step, a feature of image roughness has been defined, so that scaling can be easily separated from normal skin. In the end, Random forests will be used to ensure the generalization ability of the algorithm. This algorithm can give reliable segmentation results even the image has different lighting conditions, skin types. In the data set offered by Union Hospital, more than 90% images can be segmented accurately.
Helie, Sebastien; Roeder, Jessica L; Vucovich, Lauren; Rünger, Dennis; Ashby, F Gregory
Most behaviors unfold in time and include a sequence of submovements or cognitive activities. In addition, most behaviors are automatic and repeated daily throughout life. Yet, relatively little is known about the neurobiology of automatic sequence production. Past research suggests a gradual transfer from the associative striatum to the sensorimotor striatum, but a number of more recent studies challenge this role of the BG in automatic sequence production. In this article, we propose a new neurocomputational model of automatic sequence production in which the main role of the BG is to train cortical-cortical connections within the premotor areas that are responsible for automatic sequence production. The new model is used to simulate four different data sets from human and nonhuman animals, including (1) behavioral data (e.g., RTs), (2) electrophysiology data (e.g., single-neuron recordings), (3) macrostructure data (e.g., TMS), and (4) neurological circuit data (e.g., inactivation studies). We conclude with a comparison of the new model with existing models of automatic sequence production and discuss a possible new role for the BG in automaticity and its implication for Parkinson's disease.
Inoue, Yasuo; Kohashi, Yuuichirou; Ishikawa, Naoto; Nakajima, Masato
The increase in traffic accidents is becoming a serious social problem with the recent rapid traffic increase. In many cases, the driver"s carelessness is the primary factor of traffic accidents, and the driver assistance system is demanded for supporting driver"s safety. In this research, we propose the new method of automatic detection and recognition of road signs by image processing. The purpose of this research is to prevent accidents caused by driver"s carelessness, and call attention to a driver when the driver violates traffic a regulation. In this research, high accuracy and the efficient sign detecting method are realized by removing unnecessary information except for a road sign from an image, and detect a road sign using shape features. At first, the color information that is not used in road signs is removed from an image. Next, edges except for circular and triangle ones are removed to choose sign shape. In the recognition process, normalized cross correlation operation is carried out to the two-dimensional differentiation pattern of a sign, and the accurate and efficient method for detecting the road sign is realized. Moreover, the real-time operation in a software base was realized by holding down calculation cost, maintaining highly precise sign detection and recognition. Specifically, it becomes specifically possible to process by 0.1 sec(s)/frame using a general-purpose PC (CPU: Pentium4 1.7GHz). As a result of in-vehicle experimentation, our system could process on real time and has confirmed that detection and recognition of a sign could be performed correctly.
Zeeden, Christian; Kaboth, Stefanie; Hilgen, Frederik; Laskar, Jacques
Here we present an algorithm for the automated adjustment and optimisation of correlations between proxy data and an orbital tuning target (or similar datasets as e.g. ice models) for the R environment (R Development Core Team 2008), building on the 'astrochron' package (Meyers et al.2014). The basis of this approach is an initial tuning on orbital (precession, obliquity, eccentricity) scale. We use filters of orbital frequency ranges related to e.g. precession, obliquity or eccentricity of data and compare these filters to an ensemble of target data, which may consist of e.g. different combinations of obliquity and precession, different phases of precession and obliquity, a mix of orbital and other data (e.g. ice models), or different orbital solutions. This approach allows for the identification of an ideal mix of precession and obliquity to be used as tuning target. In addition, the uncertainty related to different tuning tie points (and also precession- and obliquity contributions of the tuning target) can easily be assessed. Our message is to suggest an initial tuning and then obtain a reproducible tuned time scale, avoiding arbitrary chosen tie points and replacing these by automatically chosen ones, representing filter maxima (or minima). We present and discuss the above outlined approach and apply it to artificial and geological data. Artificial data are assessed to find optimal filter settings; real datasets are used to demonstrate the possibilities of such an approach. References: Meyers, S.R. (2014). Astrochron: An R Package for Astrochronology. http://cran.r-project.org/package=astrochron R Development Core Team (2008). R: A language and environment for statistical computing. R Foundation for Statistical Computing, Vienna, Austria. ISBN 3-900051-07-0, URL http://www.R-project.org.
Soares, Filomena; Moreira, António
The biennial CONTROLO conferences are the main events promoted by The CONTROLO 2016 – 12th Portuguese Conference on Automatic Control, Guimarães, Portugal, September 14th to 16th, was organized by Algoritmi, School of Engineering, University of Minho, in partnership with INESC TEC, and promoted by the Portuguese Association for Automatic Control – APCA, national member organization of the International Federation of Automatic Control – IFAC. The seventy-five papers published in this volume cover a wide range of topics. Thirty-one of them, of a more theoretical nature, are distributed among the first five parts: Control Theory; Optimal and Predictive Control; Fuzzy, Neural and Genetic Control; Modeling and Identification; Sensing and Estimation. The papers go from cutting-edge theoretical research to innovative control applications and show expressively how Automatic Control can be used to increase the well being of people. .
National Oceanic and Atmospheric Administration, Department of Commerce — The 2010 United States Automatic Identification System Database contains vessel traffic data for planning purposes within the U.S. coastal waters. The database is...
National Oceanic and Atmospheric Administration, Department of Commerce — The 2014 United States Automatic Identification System Database contains vessel traffic data for planning purposes within the U.S. coastal waters. The database is...
National Oceanic and Atmospheric Administration, Department of Commerce — The 2011 United States Automatic Identification System Database contains vessel traffic data for planning purposes within the U.S. coastal waters. The database is...
National Oceanic and Atmospheric Administration, Department of Commerce — The 2009 United States Automatic Identification System Database contains vessel traffic data for planning purposes within the U.S. coastal waters. The database is...
National Oceanic and Atmospheric Administration, Department of Commerce — The 2012 United States Automatic Identification System Database contains vessel traffic data for planning purposes within the U.S. coastal waters. The database is...
An automatic safety rod for a nuclear reactor containing neutron absorbing material and designed to be inserted into a reactor core after a loss-of-flow. Actuation is based upon either a sudden decrease in core pressure drop or the pressure drop decreases below a predetermined minimum value. The automatic control rod includes a pressure regulating device whereby a controlled decrease in operating pressure due to reduced coolant flow does not cause the rod to drop into the core.
Kofoed, Jens Peter; Frigaard, Peter Bak; Friis-Madsen, Erik
The report deals with the modules for automatic control of freeboard and turbine operation on board the Wave dragon, Nissum Bredning (WD-NB) prototype, and covers what has been going on up to ultimo 2003.......The report deals with the modules for automatic control of freeboard and turbine operation on board the Wave dragon, Nissum Bredning (WD-NB) prototype, and covers what has been going on up to ultimo 2003....
Grunert, Klaus G.
Two kinds of cognitive processes can be distinguished: Automatic processes, which are mostly subconscious, are learned and changed very slowly, and are not subject to the capacity limitations of working memory, and strategic processes, which are conscious, are subject to capacity limitations......, and can easily be adapted to situational circumstances. Both the perception of advertising and the way advertising influences brand evaluation involves both processes. Automatic processes govern the recognition of advertising stimuli, the relevance decision which determines further higher-level processing...
Zoubek , Bohumir; Roussel , Jean-Marc; Kwiatkowska , Martha
International audience; Control system programs are usually validated by testing prior to their deployment. Unfortunately, testing is not exhaustive and therefore it is possible that a program which passed all the required tests still contains errors. In this paper we apply techniques of automatic verification to a control program written in ladder logic. A model is constructed mechanically from the ladder logic program and subjected to automatic verification against requirements that include...
An automatic procedure for modeling terrain is developed based on L2 projection-based interpolation of discrete terrain data onto transfinite function spaces. The function space is refined automatically by the use of image processing techniques to detect regions of high error and the flexibility of the transfinite interpolation to add degrees of freedom to these areas. Examples are shown of a section of the Palo Duro Canyon in northern Texas.
This paper deals with the problem of the automatic recognition of concepts and describes an important language tool, the ''linguistic filter'', which facilitates the construction of statistical algorithms. Certain special filters, of prepositions, conjunctions, negatives, logical implication, compound words, are presented. This is followed by a detailed description of a statistical algorithm allowing recognition of pronoun referents, and finally the problem of the automatic treatment of negatives in French is discussed [fr
Rezvov, B.A.; Artem'ev, A.N.; Maevskij, A.G.; Demkiv, A.A.; Kirillov, B.F.; Belyaev, A.D.; Artem'ev, N.A.
The way of automatic control of commercial computer programs is presented. The developed connection of the EXAFS spectrometer automatic system (which is managed by PC for DOS) is taken with the commercial program for the CCD detector control (which is managed by PC for Windows). The described complex system is used for the automation of intermediate amplitude spectra processing in EXAFS spectrum measurements at Kurchatov SR source
Rojas Labanda, Susana; Stolpe, Mathias
this issue is addressed. We propose an automatic continuation method, where the material penalization parameter is included as a new variable in the problem and a constraint guarantees that the requested penalty is eventually reached. The numerical results suggest that this approach is an appealing...... alternative to continuation methods. Automatic continuation also generally obtains better designs than the classical formulation using a reduced number of iterations....
... 46 Shipping 2 2010-10-01 2010-10-01 false Small automatic auxiliary boilers. 63.25-1 Section 63.25... AUXILIARY BOILERS Requirements for Specific Types of Automatic Auxiliary Boilers § 63.25-1 Small automatic auxiliary boilers. Small automatic auxiliary boilers defined as having heat-input ratings of 400,000 Btu/hr...
... UNDERGROUND COAL MINES Thermal Dryers § 77.314 Automatic temperature control instruments. (a) Automatic temperature control instruments for thermal dryer system shall be of the recording type. (b) Automatic... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Automatic temperature control instruments. 77...
Full Text Available Power line inspection ensures the safe operation of a power transmission grid. Using unmanned aerial vehicle (UAV images of power line corridors is an effective way to carry out these vital inspections. In this paper, we propose an automatic inspection method for power lines using UAV images. This method, known as the power line automatic measurement method based on epipolar constraints (PLAMEC, acquires the spatial position of the power lines. Then, the semi patch matching based on epipolar constraints (SPMEC dense matching method is applied to automatically extract dense point clouds within the power line corridor. Obstacles can then be automatically detected by calculating the spatial distance between a power line and the point cloud representing the ground. Experimental results show that the PLAMEC automatically measures power lines effectively with a measurement accuracy consistent with that of manual stereo measurements. The height root mean square (RMS error of the point cloud was 0.233 m, and the RMS error of the power line was 0.205 m. In addition, we verified the detected obstacles in the field and measured the distance between the canopy and power line using a laser range finder. The results show that the difference of these two distances was within ±0.5 m.
Bowyer, T.W.; Abel, K.H.; Hensley, W.K.
Over the past 3 years, with support from US DOE's NN-20 Comprehensive Test Ban Treaty (CTBT) R ampersand D program, PNNL has developed and demonstrated a fully automatic analyzer for collecting and measuring the four Xe radionuclides, 131m Xe(11.9 d), 133m Xe(2.19 d), 133 Xe (5.24 d), and 135 Xe(9.10 h), in the atmosphere. These radionuclides are important signatures in monitoring for compliance to a CTBT. Activity ratios permit discriminating radioxenon from nuclear detonation and that from nuclear reactor operations, nuclear fuel reprocessing, or medical isotope production and usage. In the analyzer, Xe is continuously and automatically separated from the atmosphere at flow rates of about 7 m 3 /h on sorption bed. Aliquots collected for 6-12 h are automatically analyzed by electron-photon coincidence spectrometry to produce sensitivities in the range of 20-100 μBq/m 3 of air, about 100-fold better than with reported laboratory-based procedures for short time collection intervals. Spectral data are automatically analyzed and the calculated radioxenon concentrations and raw gamma- ray spectra automatically transmitted to data centers
Monwar, Md Maruf; Rezaei, Siamak
Facial expressions are a key index of emotion and the interpretation of such expressions of emotion is critical to everyday social functioning. In this paper, we present an efficient video analysis technique for recognition of a specific expression, pain, from human faces. We employ an automatic face detector which detects face from the stored video frame using skin color modeling technique. For pain recognition, location and shape features of the detected faces are computed. These features are then used as inputs to a support vector machine (SVM) for classification. We compare the results with neural network based and eigenimage based automatic pain recognition systems. The experiment results indicate that using support vector machine as classifier can certainly improve the performance of automatic pain recognition system.
Shooshan Sonya E
Full Text Available Abstract Background: Indexing is a crucial step in any information retrieval system. In MEDLINE, a widely used database of the biomedical literature, the indexing process involves the selection of Medical Subject Headings in order to describe the subject matter of articles. The need for automatic tools to assist MEDLINE indexers in this task is growing with the increasing number of publications being added to MEDLINE. Methods: In this paper, we describe the use and the customization of Inductive Logic Programming (ILP to infer indexing rules that may be used to produce automatic indexing recommendations for MEDLINE indexers. Results: Our results show that this original ILP-based approach outperforms manual rules when they exist. In addition, the use of ILP rules also improves the overall performance of the Medical Text Indexer (MTI, a system producing automatic indexing recommendations for MEDLINE. Conclusion: We expect the sets of ILP rules obtained in this experiment to be integrated into MTI.
Full Text Available Automaticity, or instant recognition of combinations of letters as units of language, is essential for proficient reading in any language. The article explores automaticity amongst competent adult first-language readers of isiZulu, and the factors associated with it or its opposite - active decoding. Whilst the transparent spelling patterns of isiZulu aid learner readers, some of its orthographical features may militate against their gaining automaticity. These features are agglutination; a conjoined writing system; comparatively long, complex words; and a high rate of recurring strings of particular letters. This implies that optimal strategies for teaching reading in orthographically opaque languages such as English should not be assumed to apply to languages with dissimilar orthographies. Keywords: Orthography; Eye movement; Reading; isiZulu
Tanioka, Shin-ichi; Nakano, Mitsuhiro; Tejima, Akio; Yamada, Minoru; Saito, Tatsuo; Saito, Yoshiyuki; Abe, Rikio
We have succeeded in developing a fully automatic TIG welding system; namely CAPTIG that enables unmanned welding operations from the initial layer to the final finishing layer continuously. This welding system is designed for continuous, multilayered welding of thick and large diameter fixed pipes of nuclear power plants and large-size boiler plants where high-quality welding is demanded. In the tests conducted with this welding system, several hours of continuous unmanned welding corroborated that excellent beads are formed, good results are obtained in radiographic inspection and that quality welding is possible most reliably. This system incorporates a microcomputer for fully automatic controls by which it features a seam tracking function, wire feed position automatic control function, a self-checking function for inter-pass temperature, cooling water temperature and wire reserve. (author)
Zhang Shuocheng; Wang Dan; Jing Lan; Qiao Weimin; Ma Yunhai
An automatic control variac system is designed in order to satisfy the controlling requirement of the electronic accelerator developed by the Institute. Both design and operational principles, structure of the system as well as the software of industrial PC and micro controller unit are described. The interfaces of the control module are RS232 and RS485. A fiber optical interface (FOC) could be set up if an industrial FOC network is necessary, which will extend the filed of its application and make the communication of the system better. It is shown in practice that the system can adjust the variac output voltage automatically and assure the accurate and automatic control of the electronic accelerator. The system is designed in accordance with the general design principles and possesses the merits such as easy operation and maintenance, good expansibility, and low cost, thus it could also be used in other industrial branches. (authors)
Full Text Available Automaticity, or instant recognition of combinations of letters as units of language, is essential for proficient reading in any language. The article explores automaticity amongst competent adult first-language readers of isiZulu, and the factors associated with it or its opposite - active decoding. Whilst the transparent spelling patterns of isiZulu aid learner readers, some of its orthographical features may militate against their gaining automaticity. These features are agglutination; a conjoined writing system; comparatively long, complex words; and a high rate of recurring strings of particular letters. This implies that optimal strategies for teaching reading in orthographically opaque languages such as English should not be assumed to apply to languages with dissimilar orthographies.Keywords: Orthography; Eye movement; Reading; isiZulu
Névéol, Aurélie; Shooshan, Sonya E; Claveau, Vincent
Indexing is a crucial step in any information retrieval system. In MEDLINE, a widely used database of the biomedical literature, the indexing process involves the selection of Medical Subject Headings in order to describe the subject matter of articles. The need for automatic tools to assist MEDLINE indexers in this task is growing with the increasing number of publications being added to MEDLINE. In this paper, we describe the use and the customization of Inductive Logic Programming (ILP) to infer indexing rules that may be used to produce automatic indexing recommendations for MEDLINE indexers. Our results show that this original ILP-based approach outperforms manual rules when they exist. In addition, the use of ILP rules also improves the overall performance of the Medical Text Indexer (MTI), a system producing automatic indexing recommendations for MEDLINE. We expect the sets of ILP rules obtained in this experiment to be integrated into MTI.
Full Text Available Enucleation is a crucial step in cloning. In order to achieve automatic blind enucleation, we should detect the polar body of the oocyte automatically. The conventional polar body detection approaches have low success rate or low efficiency. We propose a polar body detection method based on machine learning in this paper. On one hand, the improved Histogram of Oriented Gradient (HOG algorithm is employed to extract features of polar body images, which will increase success rate. On the other hand, a position prediction method is put forward to narrow the search range of polar body, which will improve efficiency. Experiment results show that the success rate is 96% for various types of polar bodies. Furthermore, the method is applied to an enucleation experiment and improves the degree of automatic enucleation.
Akkoç, Betül; Arslan, Ahmet
Eyes play an important role in expressing emotions in nonverbal communication. In the present study, emotional expression classification was performed based on the features that were automatically extracted from the eye area. Fırst, the face area and the eye area were automatically extracted from the captured image. Afterwards, the parameters to be used for the analysis through discrete wavelet transformation were obtained from the eye area. Using these parameters, emotional expression analysis was performed through artificial intelligence techniques. As the result of the experimental studies, 6 universal emotions consisting of expressions of happiness, sadness, surprise, disgust, anger and fear were classified at a success rate of 84% using artificial neural networks.
Schultz, Ulrik Pagh
and specialization of classes (inheritance) are considered different abstractions. We present a new programming language, Lapis, that unifies inheritance and program specialization at the conceptual, syntactic, and semantic levels. This paper presents the initial development of Lapis, which uses inheritance...... with covariant specialization to control the automatic application of program specialization to class members. Lapis integrates object-oriented concepts, block structure, and techniques from automatic program specialization to provide both a language where object-oriented designs can be e#ciently implemented...
Bertrand, J.; Mourchon, R.; Da Costa, D.; Desandre-Navarre, Ch.
The equipment makes it possible for the reactor to attain a given power automatically and for the power to be maintained around this level. The principle of its operation consists in the changing from one power to another, at constant period, by means of a programmer transforming a power-step request into a voltage variation which is linear with time and which represents the logarithm of the required power. The real power is compared continuously with the required power. Stabilization occurs automatically as soon as the difference between the reactor power and the required power diminishes to a few per cent. (authors) [fr
Eichberg, Michael; Kahl, Matthias; Saha, Diptikalyan
Modem development environments integrate various static analyses into the build process. Analyses that analyze the whole project whenever the project changes are impractical in this context. We present an approach to automatic incrementalization of analyses that are specified as tabled logic...... programs and evaluated using incremental tabled evaluation, a technique for efficiently updating memo tables in response to changes in facts and rules. The approach has been implemented and integrated into the Eclipse IDE. Our measurements show that this technique is effective for automatically...
Full Text Available A new automatic identification system using photographic images has been designed to recognize fish, plant, and butterfly species from Europe and South America. The automatic classification system integrates multiple image processing tools to extract the geometry, morphology, and texture of the images. Artificial neural networks (ANNs were used as the pattern recognition method. We tested a data set that included 740 species and 11,198 individuals. Our results show that the system performed with high accuracy, reaching 91.65% of true positive fish identifications, 92.87% of plants and 93.25% of butterflies. Our results highlight how the neural networks are complementary to species identification.
Golenishchev, I.A.; Gracheva, T.N.; Khardikov, S.V.
The problems of automatic deciphering of the radiographic picture the purpose of which is making a conclusion concerning the quality of the inspected product on the basis of the product defect images in the picture are considered. The methods of defect image recognition are listed, and the algorithms and the class features of defects are described. The results of deciphering of a small radiographic picture by means of the ''Minsk-22'' computer are presented. It is established that the sensitivity of the method of the automatic deciphering is close to that obtained for visual deciphering
This book summarizes the recent advancement in the field of automatic speech recognition with a focus on discriminative and hierarchical models. This will be the first automatic speech recognition book to include a comprehensive coverage of recent developments such as conditional random field and deep learning techniques. It presents insights and theoretical foundation of a series of recent models such as conditional random field, semi-Markov and hidden conditional random field, deep neural network, deep belief network, and deep stacking models for sequential learning. It also discusses practical considerations of using these models in both acoustic and language modeling for continuous speech recognition.
Affect-adaptive systems have the potential to assist users that experience systematically negative moods. This thesis aims at building a platform for predicting automatically a person’s mood from his/her visual expressions. The key word is mood, namely a relatively long-term, stable and diffused
Rietman, J. S.; Goudsmit, J.; Meulemans, D.; Halbertsma, J. P. K.; Geertzen, J. H. B.
This paper describes a new automatic hinge system for leg orthoses, which provides knee stability in stance, and allows knee-flexion during swing. Indications for the hinge system are a paresis or paralysis of the quadriceps muscles. Instrumented gait analysis was performed in three patients, fitted
Rietman, J.S.; Goudsmit, J.; Meulemans, D.; Halbertsma, J.P.K.; Geertzen, J.H.B.
This paper describes a new, automatic hinge system for leg orthoses, which provides knee stability in stance, and allows knee-flexion during swing. Indications for the hinge system are a paresis or paralysis of the quadriceps muscles. Instrumented gait analysis was performed in three patients,
Eichberg, Michael; Kahl, Matthias; Saha, Diptikalyan
Modem development environments integrate various static analyses into the build process. Analyses that analyze the whole project whenever the project changes are impractical in this context. We present an approach to automatic incrementalization of analyses that are specified as tabled logic...... incrementalizing a broad range of static analyses....
Ægidiussen Jensen, Thomas; Rasmussen, Henrik Anker; Moeslund, Thomas B.
Automatic analysis of how people move about in a particular environment has a number of potential applications. However, no system has so far been able to do detection and tracking robustly. Instead, trajectories are often broken into tracklets. The key idea behind this paper is based around...
At this moment software development is still more of an art than an engineering discipline. Each piece of software is lovingly engineered, nurtured, and presented to the world as a tribute to the writer's skill. When will this change. When will the craftsmanship be removed and the programs be turned out like so many automobiles from an assembly line. Sooner or later it will happen: economic necessities will demand it. With the advent of cheap microcomputers and ever more powerful supercomputers doubling capacity, much more software must be produced. The choices are to double the number of programers, double the efficiency of each programer, or find a way to produce the needed software automatically. Producing software automatically is the only logical choice. How will automatic programing come about. Some of the preliminary actions which need to be done and are being done are to encourage programer plagiarism of existing software through public library mechanisms, produce well understood packages such as compiler automatically, develop languages capable of producing software as output, and learn enough about the whole process of programing to be able to automate it. Clearly, the emphasis must not be on efficiency or size, since ever larger and faster hardware is coming.
Hartman, J.; Lukšan, Ladislav; Zítko, J.
Roč. 45, č. 5 (2009), s. 865-883 ISSN 0023-5954 R&D Projects: GA AV ČR IAA1030405 Institutional research plan: CEZ:AV0Z10300504 Keywords : automatic differentiation * modeling languages * systems of optimization Subject RIV: BA - General Mathematics Impact factor: 0.445, year: 2009 http://dml.cz/handle/10338.dmlcz/140037
Eder, O.; Lackner, E.; Pohl, F.; Schilling, H.B.
This concept of remotely controlled facilities for repair and maintenance tasks inside the ZEPHYR vacuum vessel uses a supporting structure to insert various types of mobile automatic devices are guided by an egg-shaped disc which is part of the supporting structure. Considerations of adapting the guiding disc to the vessel contour are included. (orig.)
The design and implementation of and experience with an automatic data processing system for the reduction of data from the JADE experiment at DESY is described. The central elements are a database and a job submitter which combine powerfully to minimise the need for manual intervention. (author)
Sanna, A.; Lamberti, F.; Paravati, G.; Demartini, C.
Computer-based assessment of exams provides teachers and students with two main benefits: fairness and effectiveness in the evaluation process. This paper proposes a fully automatic evaluation tool for the Graphic and Virtual Design (GVD) curriculum at the First School of Architecture of the Politecnico di Torino, Italy. In particular, the tool is…
Van Heerden, CJ
Full Text Available to perform Maximum A Posteriori adaptation on the baseline models. The corresponding value for models trained on the audiobook data is 0.996. An automatic measure of alignment accuracy is also introduced and compared to accuracies measured relative to a gold...
Alavijeh, Amir Hossein Poorjam; Hesaraki, Soheila; Safavi, Saeid
This paper proposes an automatic smoking habit detection from spontaneous telephone speech signals. In this method, each utterance is modeled using i-vector and non-negative factor analysis (NFA) frameworks, which yield low-dimensional representation of utterances by applying factor analysis on G...
Tjong Kim Sang, E.F.; Daelemans, W.; Höthker, A.
We compare machine learning approaches for sentence length reduction for automatic generation of subtitles for deaf and hearing-impaired people with a method which relies on hand-crafted deletion rules. We describe building the necessary resources for this task: a parallel corpus of examples of news
This paper analyses several aspects of the Dutch experience of speed enforcement, and presents the results of some speed management experiments in The Netherlands, using automatic warning of speeders and enforcement of speeding. Traditional approaches to manage speed there have not resulted in
The study is on classification of Amharic news automatically using neural networks approach. Learning Vector Quantization (LVQ) algorithm is employed to classify new instance of Amharic news based on classifier developed using training dataset. Two weighting schemes, Term Frequency (TF) and Term Frequency by ...
Groeneveld, F.; Mesbah, A.; Van Deursen, A.
Dek, E.C.P.|info:eu-repo/dai/nl/313959552; van den Hout, M.A.|info:eu-repo/dai/nl/070445354; Giele, C.L.|info:eu-repo/dai/nl/318754460; Engelhard, I.M.|info:eu-repo/dai/nl/239681533
Repetitive, compulsive-like checking of an object leads to reductions in memory confidence, vividness, and detail. Experimental research suggests that this is caused by increased familiarity with perceptual characteristics of the stimulus and automatization of the checking procedure (Dek, van den
... that originated in an agency that has ceased to exist and for which there is no successor agency, the... international agreement that does not permit automatic or unilateral declassification. The declassifying agency... foreign nuclear programs (e.g., intelligence assessments or reports, foreign nuclear program information...
Wiersma, Wybo; Nerbonne, John; Lauttamus, Timo
We develop an aggregate measure of syntactic difference for automatically finding common syntactic differences between collections of text. With the use of this measure, it is possible to mine for differences between, for example, the English of learners and natives, or between related dialects. If
This article explores the concept of the automatic unfair dismissal that is regulated in s 187(1)(c) of the Labour Relations Act 66 of 1995 (LRA), where the reason for the ... This dichotomy was dealt with by the court in Fry's Metals (Pty) Ltd v National Union of Metalworkers of SA 2003 ILJ 133 (LAC), but the decision was ...
Winkels, R.; Hoekstra, R.
In this paper we present the results of an experiment in automatic concept and definition extraction from written sources of law using relatively simple natural language and standard semantic web technology. The software was tested on six laws from the tax domain.
Hamuy, M.; Pignata, G.; Maza, J.
The CHilean Automatic Supernova sEarch (CHASE) project began in 2007 with the goal to discover young, nearby southern supernovae in order to (1) better understand the physics of exploding stars and their progenitors, and (2) refine the methods to derive extragalactic distances. During the first...
Vladimír Modrák; Peter Knuth
Automatic identification of items saves time and is beneficial in various areas, including warehouse management. Identification can be done by many technologies, but RFID technology seems to be one of the smartest solutions. This article deals with testing and possible use of RFID technology in warehouse management. All results and measurement outcomes are documented in form of graphs followed by comprehensive analysis.
Momot, M. V.; Proskokov, A. V.; Natalchenko, A. S.; Biktimirov, A. S.
The present article discusses automatic positioning systems of agricultural robots used in field works. The existing solutions in this area have been analyzed. The article proposes an original solution, which is easy to implement and is characterized by high- accuracy positioning.
Ólafsdóttir, Hildur; Stegmann, Mikkel Bille; Larsson, Henrik B.W.
In this paper, a method based on Active Appearance Models (AAM) is applied for automatic registration of myocardial perfusion MRI. A semi-quantitative perfusion assessment of the registered image sequences is presented. This includes the formation of perfusion maps for three parameters; maximum up...
Cassez, Franck; Jessen, Jan Jacob; Larsen, Kim Guldstrand
In this paper, we show how to apply recent tools for the automatic synthesis of robust and near-optimal controllers for a real industrial case study. We show how to use three different classes of models and their supporting existing tools, Uppaal-TiGA for synthesis, phaver for verification...
Jozwiak, Lech; Lindwer, Menno; Corvino, Rosilde
This paper focuses on mastering the automatic architecture synthesis and application mapping for heterogeneous massively-parallel MPSoCs based on customizable application-specific instruction-set processors (ASIPs). It presents an overview of the research being currently performed in the scope...
Johnson, Melvin M
The evolution of automatic weapons is one of the most significant developments in weapons history. While this development has been filled with disagreements, controversy, and stray hurdles, out of all of this tumult, shouting, and shooting has come the progress in firearms from the days when it was necessary to build a fire under a gun to make it go off to the you press the button and they do the work" automatic firearms of the present day. In 1941, Melvin M. Johnson Jr. and Charles T. Haven, both well-established experts on firearms and ammunitions in their day, commemorated this development in Automatic Arms: Their History, Development and Use. The topics on which they illuminate the reader include: History and development How they work How to keep them firing How they may be employed in combat In the authors' foreword, they state, There has been a great deal of general discussion about various automatic weapons pro and con, and naturally there have been misunderstandings and misinterpretations." They s...
A system can automatically open at least one window of a vehicle when the vehicle is being submerged in water. The system can include a water collector and a water sensor, and when the water sensor detects water in the water collector, at least one window of the vehicle opens.
This report is a general description of an automatic target recognition system developed at the Idaho National Engineering Laboratory for the Department of Energy. A user`s manual is a separate volume, Automatic TLI Recognition System, User`s Guide, and a programmer`s manual is Automatic TLI Recognition System, Programmer`s Guide. This system was designed as an automatic target recognition system for fast screening of large amounts of multi-sensor image data, based on low-cost parallel processors. This system naturally incorporates image data fusion, and it gives uncertainty estimates. It is relatively low cost, compact, and transportable. The software is easily enhanced to expand the system`s capabilities, and the hardware is easily expandable to increase the system`s speed. In addition to its primary function as a trainable target recognition system, this is also a versatile, general-purpose tool for image manipulation and analysis, which can be either keyboard-driven or script-driven. This report includes descriptions of three variants of the computer hardware, a description of the mathematical basis if the training process, and a description with examples of the system capabilities.
Nørgaard, Sebastian A.; Sagebaum, Max; Gauger, Nicolas R.
and is demonstrated on two separate, previously published types of problems in topology optimization. Two separate software packages for automatic differentiation, CoDiPack and Tapenade are considered, and their performance and usability trade-offs are discussed and compared to a hand coded adjoint gradient...
Degner, J.; Wentura, D.
Four cross-sectional studies are presented that investigated the automatic activation of prejudice in children and adolescents (aged 9 years to 15 years). Therefore, 4 different versions of the affective priming task were used, with pictures of ingroup and outgroup members being presented as
Park, Kwi Ae; Ihm, Jong Sool; Ahn, Woo Hyun; Baik, Seung Kook; Choi, Han Yong; Kim, Bong Gi
The authors developed a computer program for automatic coding of ACR(American College of Radiology) code. The automatic coding of the ACR code is essential for computerization of the data in the department of radiology. This program was written in foxbase language and has been used for automatic coding of diagnosis in the Department of Radiology, Wallace Memorial Baptist since May 1992. The ACR dictionary files consisted of 11 files, one for the organ code and the others for the pathology code. The organ code was obtained by typing organ name or code number itself among the upper and lower level codes of the selected one that were simultaneous displayed on the screen. According to the first number of the selected organ code, the corresponding pathology code file was chosen automatically. By the similar fashion of organ code selection, the proper pathologic dode was obtained. An example of obtained ACR code is '131.3661'. This procedure was reproducible regardless of the number of fields of data. Because this program was written in 'User's Defined Function' from, decoding of the stored ACR code was achieved by this same program and incorporation of this program into program in to another data processing was possible. This program had merits of simple operation, accurate and detail coding, and easy adjustment for another program. Therefore, this program can be used for automation of routine work in the department of radiology
Canty, Morton J.; Nielsen, Allan Aasbjerg; Schmidt, Michael
The linear scale invariance of the multivariate alteration detection (MAD) transformation is used to obtain invariant pixels for automatic relative radiometric normalization of time series of multispectral data. Normalization by means of ordinary least squares regression method is compared with n...
Hermans, F.; Pinzger, M.; Van Deursen, A.
The use of spreadsheets to capture information is widespread in industry. Spreadsheets can thus be a wealthy source of domain information. We propose to automatically extract this information and transform it into class diagrams. The resulting class diagram can be used by software engineers to
Petersen, Katrine N. H.; Nielsen, Trine N.; Kjær, Troels W.
Dynamics of the spike-wave paroxysms in Childhood Absence Epilepsy (CAE) are automatically characterized using novel approaches. Features are extracted from scalograms formed by Continuous Wavelet Transform (CWT). Detection algorithms are designed to identify an estimate of the temporal development...
Bloem, J.; Bański, P.; Kupietz, M.; Lüngen, H.; Witt, A.; Barbaresi, A.; Biber, H.; Breiteneder, E.; Clematide, S.
This study discusses evaluation methods for linguists to use when employing an automatically annotated treebank as a source of linguistic evidence. While treebanks are usually evaluated with a general measure over all the data, linguistic studies often focus on a particular construction or a group
Performance of various Automatic Voltage Regulators (AVR's) in Nigeria and the causes of their inability to regulate at their set points have been investigated. The result indicates that the imported AVRs fail to give the 220 volts as displayed on the name plate at the specified low set point (such as 100, 120 volts etc) on ...
Peng, Xi; Lu, Jiwen; Yi, Zhang; Yan, Rui
In this paper, we address two challenging problems in unsupervised subspace learning: 1) how to automatically identify the feature dimension of the learned subspace (i.e., automatic subspace learning) and 2) how to learn the underlying subspace in the presence of Gaussian noise (i.e., robust subspace learning). We show that these two problems can be simultaneously solved by proposing a new method [(called principal coefficients embedding (PCE)]. For a given data set , PCE recovers a clean data set from and simultaneously learns a global reconstruction relation of . By preserving into an -dimensional space, the proposed method obtains a projection matrix that can capture the latent manifold structure of , where is automatically determined by the rank of with theoretical guarantees. PCE has three advantages: 1) it can automatically determine the feature dimension even though data are sampled from a union of multiple linear subspaces in presence of the Gaussian noise; 2) although the objective function of PCE only considers the Gaussian noise, experimental results show that it is robust to the non-Gaussian noise (e.g., random pixel corruption) and real disguises; and 3) our method has a closed-form solution and can be calculated very fast. Extensive experimental results show the superiority of PCE on a range of databases with respect to the classification accuracy, robustness, and efficiency.
Maderal, E. N.; Valcarcel, N.; Delgado, J.; Sevilla, C.; Ojeda, J. C.
National Geographic Institute of Spain (IGN-ES) has launched a new production system for automatic river network extraction for the Geospatial Reference Information (GRI) within hydrography theme. The goal is to get an accurate and updated river network, automatically extracted as possible. For this, IGN-ES has full LiDAR coverage for the whole Spanish territory with a density of 0.5 points per square meter. To implement this work, it has been validated the technical feasibility, developed a methodology to automate each production phase: hydrological terrain models generation with 2 meter grid size and river network extraction combining hydrographic criteria (topographic network) and hydrological criteria (flow accumulation river network), and finally the production was launched. The key points of this work has been managing a big data environment, more than 160,000 Lidar data files, the infrastructure to store (up to 40 Tb between results and intermediate files), and process; using local virtualization and the Amazon Web Service (AWS), which allowed to obtain this automatic production within 6 months, it also has been important the software stability (TerraScan-TerraSolid, GlobalMapper-Blue Marble , FME-Safe, ArcGIS-Esri) and finally, the human resources managing. The results of this production has been an accurate automatic river network extraction for the whole country with a significant improvement for the altimetric component of the 3D linear vector. This article presents the technical feasibility, the production methodology, the automatic river network extraction production and its advantages over traditional vector extraction systems.
E. N. Maderal
Full Text Available National Geographic Institute of Spain (IGN-ES has launched a new production system for automatic river network extraction for the Geospatial Reference Information (GRI within hydrography theme. The goal is to get an accurate and updated river network, automatically extracted as possible. For this, IGN-ES has full LiDAR coverage for the whole Spanish territory with a density of 0.5 points per square meter. To implement this work, it has been validated the technical feasibility, developed a methodology to automate each production phase: hydrological terrain models generation with 2 meter grid size and river network extraction combining hydrographic criteria (topographic network and hydrological criteria (flow accumulation river network, and finally the production was launched. The key points of this work has been managing a big data environment, more than 160,000 Lidar data files, the infrastructure to store (up to 40 Tb between results and intermediate files, and process; using local virtualization and the Amazon Web Service (AWS, which allowed to obtain this automatic production within 6 months, it also has been important the software stability (TerraScan-TerraSolid, GlobalMapper-Blue Marble , FME-Safe, ArcGIS-Esri and finally, the human resources managing. The results of this production has been an accurate automatic river network extraction for the whole country with a significant improvement for the altimetric component of the 3D linear vector. This article presents the technical feasibility, the production methodology, the automatic river network extraction production and its advantages over traditional vector extraction systems.
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Automatic hoist braking devices. 57.19006 Section 57.19006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoists § 57.19006 Automatic hoist braking devices. Automatic hoists shall be provided with devices...
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Automatic hoist braking devices. 56.19006 Section 56.19006 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR METAL AND... Hoisting Hoists § 56.19006 Automatic hoist braking devices. Automatic hoists shall be provided with devices...
Tessel M. Bauduin
Full Text Available In the 1924 Manifesto of Surrealism surrealist leader André Breton (1896-1966 defined Surrealism as ‘psychic automatism in its pure state,’ positioning ‘psychic automatism’ as both a concept and a technique. This definition followed upon an intense period of experimentation with various forms of automatism among the proto-surrealist group; predominantly automatic writing, but also induced dream states. This article explores how surrealist ‘psychic automatism’ functioned as a mechanism for communication, or the expression of thought as directly as possible through the unconscious, in the first two decades of Surrealism. It touches upon automatic writing, hysteria as an automatic bodily performance of the unconscious, dreaming and the experimentation with induced dream states, and automatic drawing and other visual arts-techniques that could be executed more or less automatically as well. For all that the surrealists reinvented automatism for their own poetic, artistic and revolutionary aims, the automatic techniques were primarily drawn from contemporary Spiritualism, psychical research and experimentation with mediums, and the article teases out the connections to mediumistic automatism. It is demonstrated how the surrealists effectively and successfully divested automatism of all things spiritual. It furthermore becomes clear that despite various mishaps, automatism in many forms was a very successful creative technique within Surrealism.
David J Clark
Full Text Available Automaticity is a hallmark feature of walking in adults who are healthy and well-functioning. In the context of walking, ‘automaticity’ refers to the ability of the nervous system to successfully control typical steady state walking with minimal use of attention-demanding executive control resources. Converging lines of evidence indicate that walking deficits and disorders are characterized in part by a shift in the locomotor control strategy from healthy automaticity to compensatory executive control. This is potentially detrimental to walking performance, as an executive control strategy is not optimized for locomotor control. Furthermore, it places excessive demands on a limited pool of executive reserves. The result is compromised ability to perform basic and complex walking tasks and heightened risk for adverse mobility outcomes including falls. Strategies for rehabilitation of automaticity are not well defined, which is due to both a lack of systematic research into the causes of impaired automaticity and to a lack of robust neurophysiological assessments by which to gauge automaticity. These gaps in knowledge are concerning given the serious functional implications of compromised automaticity. Therefore, the objective of this article is to advance the science of automaticity of walking by consolidating evidence and identifying gaps in knowledge regarding: a functional significance of automaticity; b neurophysiology of automaticity; c measurement of automaticity; d mechanistic factors that compromise automaticity; and e strategies for rehabilitation of automaticity.
... 46 Shipping 7 2010-10-01 2010-10-01 false Automatic ventilators and side ports. 171.118 Section 171.118 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) SUBDIVISION AND STABILITY... Bulkhead or Weather Deck § 171.118 Automatic ventilators and side ports. (a) An automatic ventilator must...
... Automatic brakes; speed reduction gear. [Statutory Provisions] Each locomotive and haulage car used in an... permit automatic brakes, locomotives and haulage cars shall be subject to speed reduction gear, or other... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Automatic brakes; speed reduction gear. 75.1404...
... 49 Transportation 4 2010-10-01 2010-10-01 false System, automatic train control. 236.825 Section..., INSPECTION, MAINTENANCE, AND REPAIR OF SIGNAL AND TRAIN CONTROL SYSTEMS, DEVICES, AND APPLIANCES Definitions § 236.825 System, automatic train control. A system so arranged that its operation will automatically...
Yap, Regina; Van Der Leu, Aryan
Compares dyslexic children with normal readers on measures of phonological decoding and automatic word processing. Finds that dyslexics have a deficit in automatic phonological decoding skills. Discusses results within the framework of the phonological deficit and the automatization deficit hypotheses. (RS)
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Criteria-Automatic elevators. 75.1403-4 Section... Criteria—Automatic elevators. (a) The doors of automatic elevators should be equipped with interlocking switches so arranged that the elevator car will be immovable while any door is opened or unlocked, and...
... MINES Personnel Hoisting § 77.1401 Automatic controls and brakes. Hoists and elevators shall be equipped with overspeed, overwind, and automatic stop controls and with brakes capable of stopping the elevator... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Automatic controls and brakes. 77.1401 Section...
... SERVICES (CONTINUED) DRUGS: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Equipment § 211.68 Automatic, mechanical, and electronic equipment. (a) Automatic, mechanical, or electronic... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Automatic, mechanical, and electronic equipment...
lighting methods in a framework, general usable for inspecting reflective surfaces. Special attention has been given to the design of illumination techniques to enhance defects of highly reflective aluminum sheets. The chosen optical system setup has been used to enhance surface defects of other reflective......This thesis descrbes different methods to perform automatic visual inspection of reflective manufactured products, with the aim of increasing productivity, reduce cost and improve the quality level of the production. We investigate two different systems performing automatic visual inspection....... The first is the inspection of highly reflective aluminum sheets, used by the Danish company Bang & Olufsen, as a part of the exterior design and general appearance of their audio and video products. The second is the inspection of IBM hard disk read/write heads for defects during manufacturing. We have...
With the fast development in IT technology nowadays, software is increasingly complex and large. Hundreds of people in the development team, thousands of modules and interfaces, across geographies and systems user are no longer a fresh thing. All of these put forward higher requirements for software testing. Due to the low cost of implementation and the advantage of effective inheritance and accumulation of test assets, software automation testing has gradually become one of the important means to ensure the quality of software for IT enterprises. This paper analyzes the advantages of automatic test, common misconceptions; puts forward unsuitable application scenarios and the best time to intervene; focus on the analysis of the feasibility of judging the interface automation test; and puts forward the function and elements of interface automatic test tools to have; provides a reference for large-scale project interface automated testing tool selection or custom development.
Gomes, Otávio da F M; Paciornik, Sidnei
A method for automatic classification of the shape of graphite particles in cast iron is proposed. In a typical supervised classification procedure, the standard charts from the ISO-945 standard are used as a training and validation population. Several shape and size parameters are described and used as discriminants. A new parameter, the average internal angle, is proposed and is shown to be relevant for accurate classification. The ideal parameter sets are determined, leading to validation success rates above 90%. The classifier is then applied to real cast iron samples and provides results that are consistent with visual examination. The method provides classification results per particle, different from the traditional per field chart comparison methods. The full procedure can run automatically without user interference.
Agapov, Ilya; Zagorodnov, Igor; Geloni, Gianluca; Tomin, Sergey
Existing FEL facilities often suffer from stability issues: so electron orbit, transverse electron optics, electron bunch compression and other parameters have to be readjusted often to account for drifts in performance of various components. The tuning procedures typically employed in operation are often manual and lengthy. We have been developing a combination of model-free and model-based automatic tuning methods to meet the needs of present and upcoming XFEL facilities. Our approach has been implemented at FLASH to achieve automatic SASE tuning using empirical control of orbit, electron optics and bunch compression. In this paper we describe our approach to empirical tuning, the software which implements it, and the results of using it at FLASH.We also discuss the potential of using machine learning and model-based techniques in tuning methods.
Kim, Jae H.; Lee, Jae C.; Moon, Soon S.; Eom, Heung S.; Choi, Yu R
Pressure pipe inspection in nuclear power plants is one of the mandatory regulation items. Comparing to manual ultrasonic inspection, automatic inspection has the benefits of more accurate and reliable inspection results and reduction of radiation disposal. final object of this project is to develop an automatic pipeline inspection system of pressure pipe welds in nuclear power plants. We developed a pipeline scanning robot with four magnetic wheels and 2-axis manipulator for controlling ultrasonic transducers, and developed the robot control computer which controls the robot to navigate along inspection path exactly. We expect our system can contribute to reduction of inspection time, performance enhancement, and effective management of inspection results. The system developed by this project can be practically used for inspection works after field tests. (author)
Fluhr, Christian Yves Andre
This research thesis concerns the field of artificial intelligence. It addresses learning algorithms applied to automatic processing of languages. The author first briefly describes some mechanisms of human intelligence in order to describe how these mechanisms are simulated on a computer. He outlines the specific role of learning in various manifestations of intelligence. Then, based on the Markov's algorithm theory, the author discusses the notion of learning algorithm. Two main types of learning algorithms are then addressed: firstly, an 'algorithm-teacher dialogue' type sanction-based algorithm which aims at learning how to solve grammatical ambiguities in submitted texts; secondly, an algorithm related to a document system which structures semantic data automatically obtained from a set of texts in order to be able to understand by references to any question on the content of these texts
Saraiva, Daniela; Lousada, Marisa; Hall, Andreia; Jesus, Luis M T
To develop the pediatric Automatic Phonological Analysis Tools (APAT) and to estimate inter and intrajudge reliability, content validity, and concurrent validity. The APAT were constructed using Excel spreadsheets with formulas. The tools were presented to an expert panel for content validation. The corpus used in the Portuguese standardized test Teste Fonético-Fonológico - ALPE produced by 24 children with phonological delay or phonological disorder was recorded, transcribed, and then inserted into the APAT. Reliability and validity of APAT were analyzed. The APAT present strong inter- and intrajudge reliability (>97%). The content validity was also analyzed (ICC = 0.71), and concurrent validity revealed strong correlations between computerized and manual (traditional) methods. The development of these tools contributes to fill existing gaps in clinical practice and research, since previously there were no valid and reliable tools/instruments for automatic phonological analysis, which allowed the analysis of different corpora.
Lin, Xiaofan; Simske, Steven J.
This paper presents a novel method of automatically adding navigation capabilities to re-mastered electronic books. We first analyze the need for a generic and robust system to automatically construct navigation links into re-mastered books. We then introduce the core algorithm based on text matching for building the links. The proposed method utilizes the tree-structured dictionary and directional graph of the table of contents to efficiently conduct the text matching. Information fusion further increases the robustness of the algorithm. The experimental results on the MIT Press digital library project are discussed and the key functional features of the system are illustrated. We have also investigated how the quality of the OCR engine affects the linking algorithm. In addition, the analogy between this work and Web link mining has been pointed out.
Full Text Available This article describes RFID technology in conjunction with warehouse management systems. Article also deals with automatic identification and data capture technologies and each processes, which are used in warehouse management system. It describes processes from entering goods into production to identification of goods and also palletizing, storing, bin transferring and removing goods from warehouse. Article focuses on utilizing AMP middleware in WMS processes in Nowadays, the identification of goods in most warehouses is carried through barcodes. In this article we want to specify, how can be processes described above identified through RFID technology. All results are verified by measurement in our AIDC laboratory, which is located at the University of Žilina, and also in Laboratory of Automatic Identification Goods and Services located in GS1 Slovakia. The results of our research bring the new point of view and indicate the ways using of RFID technology in warehouse management system.
Full Text Available This article proposes an algorithm for automatic analysis of attack data in IP telephony network with a neural network. Data for the analysis is gathered from variable monitoring application running in the network. These monitoring systems are a typical part of nowadays network. Information from them is usually used after attack. It is possible to use an automatic classification of IP telephony attacks for nearly real-time classification and counter attack or mitigation of potential attacks. The classification use proposed neural network, and the article covers design of a neural network and its practical implementation. It contains also methods for neural network learning and data gathering functions from honeypot application.
Adam, Gheorghe; Adam, Sanda
The paper describes a Bayesian automatic adaptive quadrature (BAAQ) solution for numerical integration which is simultaneously robust, reliable, and efficient. Detailed discussion is provided of three main factors which contribute to the enhancement of these features: (1) refinement of the m-panel automatic adaptive scheme through the use of integration-domain-length-scale-adapted quadrature sums; (2) fast early problem complexity assessment - enables the non-transitive choice among three execution paths: (i) immediate termination (exceptional cases); (ii) pessimistic - involves time and resource consuming Bayesian inference resulting in radical reformulation of the problem to be solved; (iii) optimistic - asks exclusively for subrange subdivision by bisection; (3) use of the weaker accuracy target from the two possible ones (the input accuracy specifications and the intrinsic integrand properties respectively) - results in maximum possible solution accuracy under minimum possible computing time.
Anuar Mikdad Muad; Mohd Ashhar Hj Khalid; Abdul Aziz Mohamad; Abu Bakar Mhd Ghazali; Abdul Razak Hamzah
With the advancement of computer imaging technology, the image on hard radiographic film can be digitized and stored in a computer and the manual process of defect recognition and classification may be replace by the computer. In this paper a computerized method for automatic detection and classification of common defects in film radiography of weld pipe is described. The detection and classification processes consist of automatic selection of interest area on the image and then classify common defects using image processing and special algorithms. Analysis of the attributes of each defect such as area, size, shape and orientation are carried out by the feature analysis process. These attributes reveal the type of each defect. These methods of defect classification result in high success rate. Our experience showed that sharp film images produced better results
Kristensen, Kasper; Nielsen, Anders; Berg, Casper Willestofte
are automatically integrated out. This approximation, and its derivatives, are obtained using automatic differentiation (up to order three) of the joint likelihood. The computations are designed to be fast for problems with many random effects (approximate to 10(6)) and parameters (approximate to 10...... computations. The user defines the joint likelihood for the data and the random effects as a C++ template function, while all the other operations are done in R; e.g., reading in the data. The package evaluates and maximizes the Laplace approximation of the marginal likelihood where the random effects......(3)). Computation times using ADMB and TMB are compared on a suite of examples ranging from simple models to large spatial models where the random effects are a Gaussian random field. Speedups ranging from 1.5 to about 100 are obtained with increasing gains for large problems...
Mysling, Peter; Petersen, Peter Kersten; Nielsen, Mads
Segmentation of vertebral contours is an essential task in the design of automatic tools for vertebral fracture assessment. In this paper, we propose a novel segmentation technique which does not require operator interaction. The proposed technique solves the segmentation problem in a hierarchical...... manner. In a first phase, a coarse estimate of the overall spine alignment and the vertebra locations is computed using a shape model sampling scheme. These samples are used to initialize a second phase of active shape model search, under a nonlinear model of vertebra appearance. The search...... is constrained by a conditional shape model, based on the variability of the coarse spine location estimates. The technique is evaluated on a data set of manually annotated lumbar radiographs. The results compare favorably to the previous work in automatic vertebra segmentation, in terms of both segmentation...
Matos, Aníbal; Veiga, Germano
During the last 20 years the Portuguese association of automatic control, Associação Portuguesa de Controlo Automático, with the sponsorship of IFAC have established the CONTROLO conference as a reference international forum where an effective exchange of knowledge and experience amongst researchers active in various theoretical and applied areas of systems and control can take place, always including considerable space for promoting new technical applications and developments, real-world challenges and success stories. In this 11th edition the CONTROLO conference evolved by introducing two strategic partnerships with Spanish and Brazilian associations in automatic control, Comité Español de Automática and Sociedade Brasileira de Automatica, respectively.
A system for the semi-automatic survey of drawings is presented. Its design has been oriented to the reduction of the stored information required for the drawing reproduction. This equipment consists mainly of a plotter driven by a micro-computer, but the pen of the plotter is replaced by a circular photodiode array. Line drawings are first viewed as a concatenation of vectors, with constant angle between the two vectors, and then divided in arcs of circles and line segments. A dynamic analysis of line intersections with the circular sensor permits to identify starting points and end points in a line, for the purpose of automatically following connected lines in drawing. The advantage of the method described is that precision practically depends only on the plotter performance, the sensor resolution being only considered for the thickness of strokes and the distance between two strokes. (author) [fr
Murynin, Alexander B.; Matveev, Ivan A.; Kuznetsov, Victor D.
A biometric access control system based on identification of human face is presented. The system developed performs remote measurements of the necessary face features. Two different scenarios of the system behavior are implemented. The first one assumes the verification of personal data entered by visitor from console using keyboard or card reader. The system functions as an automatic checkpoint, that strictly controls access of different visitors. The other scenario makes it possible to identify visitors without any person identifier or pass. Only person biometrics are used to identify the visitor. The recognition system automatically finds necessary identification information preliminary stored in the database. Two laboratory models of recognition system were developed. The models are designed to use different information types and sources. In addition to stereoscopic images inputted to computer from cameras the models can use voice data and some person physical characteristics such as person's height, measured by imaging system.
Event picking is used in many steps of seismic processing. We present an automatic event picking method that is based on a new attribute of seismic signals, instantaneous traveltime. The calculation of the instantaneous traveltime consists of two separate but interrelated stages. First, a trace is mapped onto the time-frequency domain. Then the time-frequency representation is mapped back onto the time domain by an appropriate operation. The computed instantaneous traveltime equals the recording time at those instances at which there is a seismic event, a feature that is used to pick the events. We analyzed the concept of the instantaneous traveltime and demonstrated the application of our automatic picking method on dynamite and Vibroseis field data.
Veroff, R. L.
A technique for incorporating automatic transformations into processes such as the application of inference rules, subsumption, and demodulation provides a mechanism for improving search strategies for theorem proving problems arising from the field of program verification. The incorporation of automatic transformations into the inference process can alter the search space for a given problem, and is particularly useful for problems having broad rather than deep proofs. The technique can also be used to permit the generation of inferences that might otherwise be blocked and to build some commutativity or associativity into the unification process. Appropriate choice of transformations, and new literal clashing and unification algorithms for applying them, showed significant improvement on several real problems according to several distinct criteria. 22 references, 1 figure.
Holdridge, Donna J [Argonne National Lab. (ANL), Argonne, IL (United States); Kyrouac, Jenni A [Argonne National Lab. (ANL), Argonne, IL (United States)
The Meteorological Automatic Weather Station (MAWS) is a surface meteorological station, manufactured by Vaisala, Inc., dedicated to the balloon-borne sounding system (BBSS), providing surface measurements of the thermodynamic state of the atmosphere and the wind speed and direction for each radiosonde profile. These data are automatically provided to the BBSS during the launch procedure and included in the radiosonde profile as the surface measurements of record for the sounding. The MAWS core set of measurements is: Barometric Pressure (hPa), Temperature (°C), Relative Humidity (%), Arithmetic-Averaged Wind Speed (m/s), and Vector-Averaged Wind Direction (deg). The sensors that collect the core variables are mounted at the standard heights defined for each variable.
To select the most suitable simulation algorithm for a given task is often difficult. This is due to intricate interactions between model features, implementation details, and runtime environment, which may strongly affect the overall performance. An automated selection of simulation algorithms supports users in setting up simulation experiments without demanding expert knowledge on simulation. Roland Ewald analyzes and discusses existing approaches to solve the algorithm selection problem in the context of simulation. He introduces a framework for automatic simulation algorithm selection and
This article discusses how to make students of Science Education in first year feel interesting in English lesson, understanding the text well and can communicate English fluency. It has been suggested that Authentic Material and Automaticity Theory not only creates a friendly and fun condition in teaching reading but helps students to study comprehensibly so they are able to understand the text, structure, vocabulary easily, read fluently and they also can communicate in English. The authent...
Agus Trimuji Susilo; Lingga Hermanto Drs. MM
Lack of attention to the information officer street lights, cause is not exactly the timewhen the blame lights street lighting street - the street in this city protocol. And whenit was already dark, the lights had not lit, so it can harm the users of the road. Werecommend that when it got bright lights - the lights switched off late, so muchelectricity is wasted with nothing - nothing.Given the problems above, the automatic switching is required that can control all thelights - the existing l...
Liu, Yi; Qi, Guoyang; Li, Zeyu; Wu, Qiannan; Meng, Yupeng
This paper introduces a kind of automatic control system of single-chip microcomputer and a temperature and humidity sensor based on the greenhouse, describes the system's hardware structure, working principle and process, and a large number of experiments on the effect of the control system, the results show that the system can ideally control temperature and room temperature and humidity, can be used in indoor breeding and planting, and has the versatility and portability.
Scaringella, N.; Zoia, G.; Mlynek, D.
This paper reviews the state-of-the-art in automatic genre classification of music collections through three main paradigms: expert systems, unsupervised classification, and supervised classification. The paper discusses the importance of music genres with their definitions and hierarchies. It also presents techniques to extract meaningful information from audio data to characterize musical excerpts. The paper also presents the results of new emerging research fields and techniques that inves...
Boudin, Florian; Velazquez-Morales, Patricia; Torres-Moreno, Juan-Manuel
We present an oriented numerical summarizer algorithm, applied to producing automatic summaries of scientific documents in Organic Chemistry. We present its implementation named Yachs (Yet Another Chemistry Summarizer) that combines a specific document pre-processing with a sentence scoring method relying on the statistical properties of documents. We show that Yachs achieves the best results among several other summarizers on a corpus of Organic Chemistry articles.
Novozámský, Adam; Flusser, Jan; Tachecí, I.; Sulík, L.; Bureš, J.; Krejcar, O.
Roč. 21, č. 12 (2016), s. 1-8, č. článku 126007. ISSN 1083-3668 R&D Projects: GA ČR GA15-16928S Institutional support: RVO:67985556 Keywords : Automatic blood detection * capsule endoscopy video Subject RIV: JD - Computer Applications, Robotics Impact factor: 2.530, year: 2016 http://library.utia.cas.cz/separaty/2016/ZOI/flusser-0466936.pdf
increasing, while F2 is decreasing, as cognitive load is increased. Classification results performed on the Stroop test database show that formant...Final Project Report Grant AOARD-10-4029 Automatic Multimodal Cognitive Load Measurement (AMCLM) June 2011 NICTA DSIM Team...past year. At the start of the project, we carried out a literature review on video based physiological measures of cognitive load, focusing on
Choong, Miew Keen; Galgani, Filippo; Dunn, Adam G; Tsafnat, Guy
Snowballing involves recursively pursuing relevant references cited in the retrieved literature and adding them to the search results. Snowballing is an alternative approach to discover additional evidence that was not retrieved through conventional search. Snowballing's effectiveness makes it best practice in systematic reviews despite being time-consuming and tedious. Our goal was to evaluate an automatic method for citation snowballing's capacity to identify and retrieve the full text and/or abstracts of cited articles. Using 20 review articles that contained 949 citations to journal or conference articles, we manually searched Microsoft Academic Search (MAS) and identified 78.0% (740/949) of the cited articles that were present in the database. We compared the performance of the automatic citation snowballing method against the results of this manual search, measuring precision, recall, and F1 score. The automatic method was able to correctly identify 633 (as proportion of included citations: recall=66.7%, F1 score=79.3%; as proportion of citations in MAS: recall=85.5%, F1 score=91.2%) of citations with high precision (97.7%), and retrieved the full text or abstract for 490 (recall=82.9%, precision=92.1%, F1 score=87.3%) of the 633 correctly retrieved citations. The proposed method for automatic citation snowballing is accurate and is capable of obtaining the full texts or abstracts for a substantial proportion of the scholarly citations in review articles. By automating the process of citation snowballing, it may be possible to reduce the time and effort of common evidence surveillance tasks such as keeping trial registries up to date and conducting systematic reviews.
Automatic Modulation Classification (AMC) has been a key technology in many military, security, and civilian telecommunication applications for decades. In military and security applications, modulation often serves as another level of encryption; in modern civilian applications, multiple modulation types can be employed by a signal transmitter to control the data rate and link reliability. This book offers comprehensive documentation of AMC models, algorithms and implementations for successful modulation recognition. It provides an invaluable theoretical and numerical comparison of AMC algo
Lehtonen, M. [VTT Energy, Espoo (Finland); Hakola, T.; Antila, E. [ABB Power Oy (Finland); Seppaenen, M. [North-Carelian Power Company (Finland)
In this chapter, the automatic location of short circuit faults on medium voltage distribution lines, based on the integration of computer systems of medium voltage distribution network automation is discussed. First the distribution data management systems and their interface with the substation telecontrol, or SCADA systems, is studied. Then the integration of substation telecontrol system and computerized relay protection is discussed. Finally, the implementation of the fault location system is presented and the practical experience with the system is discussed
Abbatiello, L.A.; Neal, R.E.
A means for monitoring the material portion in the flame of a plasma spray gun during spraying operations is described. A collimated detector, sensitive to certain wavelengths of light emission, is used to locate the centroid of the material with each pass of the gun. The response from the detector is then relayed to the gun controller to be used to automatically realign the gun
Meyer, George; Smith, G. Allan
Automatic digital electronic control system based on inverse-model-follower concept being developed for proposed vertical-attitude-takeoff-and-landing airplane. Inverse-model-follower control places inverse mathematical model of dynamics of controlled plant in series with control actuators of controlled plant so response of combination of model and plant to command is unity. System includes feedback to compensate for uncertainties in mathematical model and disturbances imposed from without.
Velbeck, K.J.; Streetz, K.L.; Rotunda, J.E.
BICRON NE has developed an advanced version of the Model 8800 Automatic TLD Reader. Improvements in the reader include a Windows NT TM -based operating system and a Pentium microprocessor for the host controller, a servo-controlled transport, a VGA display, mouse control, and modular assembly. This high capacity reader will automatically read fourteen hundred TLD Cards in one loading. Up to four elements in a card can be heated without mechanical contact, using hot nitrogen gas. Improvements in performance include an increased throughput rate and more precise card positioning. Operation is simplified through easy-to-read Windows-type screens. Glow curves are displayed graphically along with light intensity, temperature, and channel scaling. Maintenance and diagnostic aids are included for easier troubleshooting. A click of a mouse will command actions that are displayed in easy-to-understand English words. Available options include an internal 90 Sr irradiator, automatic TLD calibration, and two different extremity monitoring modes. Results from testing include reproducibility, reader stability, linearity, detection threshold, residue, primary power supply voltage and frequency, transient voltage, drop testing, and light leakage. (author)
Full Text Available This article discusses how to make students of Science Education in first year feel interesting in English lesson, understanding the text well and can communicate English fluency. It has been suggested that Authentic Material and Automaticity Theory not only creates a friendly and fun condition in teaching reading but helps students to study comprehensibly so they are able to understand the text, structure, vocabulary easily, read fluently and they also can communicate in English. The authentic material can make the teaching learning process fun and eliminate boring because the topics and materials can be found in internet so it will be more visually and interactive . Automaticity theory can solve the problem of students who must memorize words that make them feel boring and forget the words soon. The other benefit is the students can exposure the real language being used in a real context and stimulate studens’idea, encouarage them to relate themselves with real-life experiencesThese strategies can make the students understand easily and enjoy the teaching learning process. By combining authentic material and automaticity strategies for teaching English in science education, will develop readers (students to become fully competent and fluent.
Full Text Available In this paper, fuzzy logic based an automatic door control system is designed to provide for heat energy savings. The heat energy loss usually occurs in where outomotic doors are used. Designed fuzzy logic system’s Input statuses (WS: Walking Speed and DD: Distance Door and the output status (DOS: Door Opening Speed is determined. According to these cases, rule base (25 rules is created; the rules are processed by a fuzzy logic and by appyled to control of an automatic door. An interface program is prepared by using Matlab Graphical User Interface (GUI programming language and some sample results are checked on Matlab using fuzzy logic toolbox. Designed fuzzy logic controller is tested at different speed cases and the results are plotted. As a result; in this study, we have obtained very good results in control of an automatic door with fuzzy logic. The results of analyses have indicated that the controls performed with fuzzy logic provided heat energy savings, less heat energy loss and reliable, consistent controls and that are feasible to in real.
Wang, Caroline; Zeanah, Hugh; Anderson, Audie; Patrick, Clint; Brady, Mike; Ford, Donnie
Automatic Detection of Electric Power Troubles (A DEPT) is an expert system that integrates knowledge from three different suppliers to offer an advanced fault-detection system. It is designed for two modes of operation: real time fault isolation and simulated modeling. Real time fault isolation of components is accomplished on a power system breadboard through the Fault Isolation Expert System (FIES II) interface with a rule system developed in-house. Faults are quickly detected and displayed and the rules and chain of reasoning optionally provided on a laser printer. This system consists of a simulated space station power module using direct-current power supplies for solar arrays on three power buses. For tests of the system's ablilty to locate faults inserted via switches, loads are configured by an INTEL microcomputer and the Symbolics artificial intelligence development system. As these loads are resistive in nature, Ohm's Law is used as the basis for rules by which faults are located. The three-bus system can correct faults automatically where there is a surplus of power available on any of the three buses. Techniques developed and used can be applied readily to other control systems requiring rapid intelligent decisions. Simulated modeling, used for theoretical studies, is implemented using a modified version of Kennedy Space Center's KATE (Knowledge-Based Automatic Test Equipment), FIES II windowing, and an ADEPT knowledge base.
The author proposed searching method for users who need not-comprehensive retrieval. That is to provide flexible number of related documents for the users automatically. A group of technical terms are used as search terms to express an inquiry. Logical sums of the terms in the ascending order of frequency of the usage are prepared sequentially and automatically, and then the search formulas, qsub(m) and qsub(m-1) which meet certain threshold values are selected automatically also. Users justify precision of the search output up to 20 items retrieved by the formula qsub(m). If a user wishes more than 30% of recall ratio, the serach result should be output by qsub(m), and if he wishes less than 30% of it, it should be output by qsub(m-1). The search by this method using one year volume of INIS Database (76,600 items) and five inquiries resulted in 32% of recall ratio and 36% of precision ratio on the average in the case of qsub(m). The connecting time of a terminal was within 15 minutes per an inquiry. It showed more efficiency than that of an inexperienced searcher. The method can be applied to on-line searching system for database in which natural language only or natural language and controlled vocabulary are used. (author)
Full Text Available Indirect immunofluorescence (IIF with HEp-2 cells has been used for the detection of antinuclear autoantibodies (ANA in systemic autoimmune diseases. The ANA testing allows us to scan a broad range of autoantibody entities and to describe them by distinct fluorescence patterns. Automatic inspection for fluorescence patterns in an IIF image can assist physicians, without relevant experience, in making correct diagnosis. How to segment the cells from an IIF image is essential in developing an automatic inspection system for ANA testing. This paper focuses on the cell detection and segmentation; an efficient method is proposed for automatically detecting the cells with fluorescence pattern in an IIF image. Cell culture is a process in which cells grow under control. Cell counting technology plays an important role in measuring the cell density in a culture tank. Moreover, assessing medium suitability, determining population doubling times, and monitoring cell growth in cultures all require a means of quantifying cell population. The proposed method also can be used to count the cells from an image taken under a fluorescence microscope.
Dwyer, David; Wren, Lee; Thornton, John; Bonsor, Nigel
Airborne electro-optic surveillance from a moving platform currently requires regular interaction from a trained operator. Even simple tasks such as fixating on a static point on the ground can demand constant adjustment of the camera orientation to compensate for platform motion. In order to free up operator time for other tasks such as navigation and communication with ground assets, an automatic gaze control system is needed. This paper describes such a system, based purely on tracking points within the video image. A number of scene points are automatically selected and their inter-frame motion tracked. The scene motion is then estimated using a model of a planar projective transform. For reliable and accurate camera pointing, the modeling of the scene motion must be robust to common problems such as scene point obscuration, objects moving independently within the scene and image noise. This paper details a COTS based system for automatic camera fixation and describes ways of preventing objects moving in the scene or poor motion estimates from corrupting the scene motion model.
Gettel, Melissa; Gulliver, John S; Kayhanian, Masoud; DeGroot, Gregory; Brand, Joshua; Mohseni, Omid; Erickson, Andrew J
Suspended solids either as total suspended solids (TSS) or suspended sediment concentration (SSC) is an integral particulate water quality parameter that is important in assessing particle-bound contaminants. At present, nearly all stormwater runoff quality monitoring is performed with automatic samplers in which the sampling intake is typically installed at the bottom of a storm sewer or channel. This method of sampling often results in a less accurate measurement of suspended sediment and associated pollutants due to the vertical variation in particle concentration caused by particle settling. In this study, the inaccuracies associated with sampling by conventional intakes for automatic samplers have been verified by testing with known suspended sediment concentrations and known particle sizes ranging from approximately 20 μm to 355 μm under various flow rates. Experimental results show that, for samples collected at a typical automatic sampler intake position, the ratio of sampled to feed suspended sediment concentration is up to 6600% without an intake strainer and up to 300% with a strainer. When the sampling intake is modified with multiple sampling tubes and fitted with a wing to provide lift (winged arm sampler intake), the accuracy of sampling improves substantially. With this modification, the differences between sampled and feed suspended sediment concentration were more consistent and the sampled to feed concentration ratio was accurate to within 10% for particle sizes up to 250 μm.
Purpose: To enable automatic operation of control rods based on the reactor operation planning, and particularly, to decrease the operator's load upon start up and shutdown of the reactor. Constitution: Operation plannings, demand for the automatic operation, break point setting value, power and reactor core flow rate change, demand for operation interrupt, demand for restart, demand for forecasting and the like are inputted to an input device, and an overall judging device performs a long-term forecast as far as the break point by a long-term forecasting device based on the operation plannings. The automatic reactor operation or the like is carried out based on the long-term forecasting and the short time forecasting is performed by the change in the reactor core status due to the control rod operation sequence based on the control rod pattern and the operation planning. Then, it is judged if the operation for the intended control rod is possible or not based on the result of the short time forecasting. (Aizawa, K.)
Zhu, Liang-Jun; Zhu, A.-Xing; Qin, Cheng-Zhi; Liu, Jun-Zhi
Fuzzy characterization of slope positions is important for geographic modeling. Most of the existing fuzzy classification-based methods for fuzzy characterization require extensive user intervention in data preparation and parameter setting, which is tedious and time-consuming. This paper presents an automatic approach to overcoming these limitations in the prototype-based inference method for deriving fuzzy membership value (or similarity) to slope positions. The key contribution is a procedure for finding the typical locations and setting the fuzzy inference parameters for each slope position type. Instead of being determined totally by users in the prototype-based inference method, in the proposed approach the typical locations and fuzzy inference parameters for each slope position type are automatically determined by a rule set based on prior domain knowledge and the frequency distributions of topographic attributes. Furthermore, the preparation of topographic attributes (e.g., slope gradient, curvature, and relative position index) is automated, so the proposed automatic approach has only one necessary input, i.e., the gridded digital elevation model of the study area. All compute-intensive algorithms in the proposed approach were speeded up by parallel computing. Two study cases were provided to demonstrate that this approach can properly, conveniently and quickly derive the fuzzy slope positions.
Muriel A Hagenaars
Full Text Available Automatic defense responses promote survival and appropriate action under threat. They have also been associated with the development of threat-related psychiatric syndromes. Targeting such automatic responses during threat may be useful in populations with frequent threat exposure. Here, two experiments explored whether mental imagery as a pre-trauma manipulation could influence fear bradycardia (a core characteristic of freezing during subsequent analogue trauma (affective picture viewing. Image-based interventions have proven successful in the treatment of threat-related disorders, and are easily applicable. In Experiment 1 43 healthy participants were randomly assigned to an imagery script condition. Participants executed a passive viewing task with blocks of neutral, pleasant and unpleasant pictures after listening to an auditory script that was either related (with a positive or a negative outcome or unrelated to the unpleasant pictures from the passive viewing task. Heart rate was assessed during script listening and during passive viewing. Imagining negative related scripts resulted in greater bradycardia (neutral-unpleasant contrast than imagining positive scripts, especially unrelated. This effect was replicated in Experiment 2 (N = 51, again in the neutral-unpleasant contrast. An extra no-script condition showed that bradycardia was not induced by the negative related script, but rather that a positive script attenuated bradycardia. These preliminary results might indicate reduced vigilance after unrelated positive events. Future research should replicate these findings using a larger sample. Either way, the findings show that highly automatic defense behavior can be influenced by relatively simple mental imagery manipulations.
Kim, Jae Hee; Eom, Heung Seop; Lee, Jae Cheol; Choi, Yoo Raek; Moon, Soon Seung
Using recent technologies on a mobile robot computer science, we developed an automatic inspection system for weld lines of the reactor vessel. The ultrasonic inspection of the reactor pressure vessel is currently performed by commercialized robot manipulators. Since, however, the conventional fixed type robot manipulator is very huge, heavy and expensive, it needs long inspection time and is hard to handle and maintain. In order to resolve these problems, we developed a new automatic inspection system using a small mobile robot crawling on the vertical wall of the reactor vessel. According to our conceptual design, we developed the reactor inspection system including an underwater inspection robot, a laser position control subsystem, an ultrasonic data acquisition/analysis subsystem and a main control subsystem. We successfully carried out underwater experiments on the reactor vessel mockup, and real reactor ready for Ulchine nuclear power plant unit 6 at Dusan Heavy Industry in Korea. After this project, we have a plan to commercialize our inspection system. Using this system, we can expect much reduction of the inspection time, performance enhancement, automatic management of inspection history, etc. In the economic point of view, we can also expect import substitution more than 4 million dollars. The established essential technologies for intelligent control and automation are expected to be synthetically applied to the automation of similar systems in nuclear power plants
Jones, Manon W.; Snowling, Margaret J.; Moll, Kristina
Reading fluency is often predicted by rapid automatized naming (RAN) speed, which as the name implies, measures the automaticity with which familiar stimuli (e.g., letters) can be retrieved and named. Readers with dyslexia are considered to have less "automatized" access to lexical information, reflected in longer RAN times compared with…
Hovland, Paul D; Norris, Boyana; Strout, Michelle Mills; Bhowmick, Sanjukta; Utke, Jean
Automatic differentiation is a technique for transforming a program or subprogram that computes a function, including arbitrarily complex simulation codes, into one that computes the derivatives of that function. We describe the implementation and application of automatic differentiation tools. We highlight recent advances in the combinatorial algorithms and compiler technology that underlie successful implementation of automatic differentiation tools. We discuss applications of automatic differentiation in design optimization and sensitivity analysis. We also describe ongoing research in the design of language-independent source transformation infrastructures for automatic differentiation algorithms
Video is becoming a prevalent medium for e-learning. Lecture videos contain text information in both the presentation slides and lecturer's speech. This paper examines the relative utility of automatically recovered text from these sources for lecture video retrieval. To extract the visual information, we automatically detect slides within the videos and apply optical character recognition to obtain their text. Automatic speech recognition is used similarly to extract spoken text from the recorded audio. We perform controlled experiments with manually created ground truth for both the slide and spoken text from more than 60 hours of lecture video. We compare the automatically extracted slide and spoken text in terms of accuracy relative to ground truth, overlap with one another, and utility for video retrieval. Results reveal that automatically recovered slide text and spoken text contain different content with varying error profiles. Experiments demonstrate that automatically extracted slide text enables higher precision video retrieval than automatically recovered spoken text.
Nishikawa, Daiji; Matsunaga, Miki; Furutani, Kaichiro
This study investigated the effects of rumination (reflective pondering and brooding) on automatic thoughts (both negative and positive) and depressive symptoms. University students (N=183; 96 men) completed the Self-Rating Depression Scale (SDS), Automatic Thoughts Questionnaire-Revised (ATQ-R), and Response Style Scale (RSS). We conducted a path analysis which included gender as a factor. The results revealed that brooding was associated with negative automatic thoughts. Negative automatic thoughts contributed to the aggravation of depressive symptoms. In contrast, reflective pondering was associated with positive automatic thoughts. Positive automatic thoughts contributed to the reduction of depressive symptoms. These results indicate that rumination does not affect depressive symptoms directly. We suggest that rumination affects depressive symptoms indirectly through automatic thoughts, and that there are gender differences in the influence process.
An automatic sample changer for gamma spectrometry is described which is designed for large-volume, low radioactivity environmental samples of various sizes up to maximum dimensions 100 mm diameter x 60 mm high. The sample changer is suitable for use with most existing gamma spectrometry systems which utilize GeLi or NaI detectors in vertical mode, in conjunction with a pulse height analyzer having auto-cycle and suitable data output facilities; it is linked to a Nuclear Data ND 6620 computer-based analysis system. (U.K.)
Kim, J. H.; Payton, D. W.; Olin, K. E.; Tseng, D. Y.
This paper describes a new approach to automatic target recognizer (ATR) development utilizing artificial intelligent techniques. The ATR system exploits contextual information in its detection and classification processes to provide a high degree of robustness and adaptability. In the system, knowledge about domain objects and their contextual relationships is encoded in frames, separating it from low level image processing algorithms. This knowledge-based system demonstrates an improvement over the conventional statistical approach through the exploitation of diverse forms of knowledge in its decision-making process.
Burgess, P. H.; Iles, W.J.
The Automatic Alarm Dosimeter type RAD 21 is a batterypowered personal dosemeter and exposure rate alarm monitor, designed to be worn on the body, covering an exposure range from 0.1 to 999.9 mR and has an audible alarm which can be pre-set over the range 1 mR h -1 to 250 mR h -1 . The instrument is designed to measure x- and γ radiation over the energy range 50 keV to 3 MeV. The facilities and controls, the radiation, electrical, environmental and mechanical characteristics, and the manual, have been evaluated. (U.K.)
Audone, B.; Gerbi, G.
The technical study and the design approaches adopted for the definition of the automatic electromagnetic field generating system (AEFGS) dedicated to EMC susceptibility testing are presented. The AEFGS covers the frequency range 10 KHz to 40 GHZ and operates successfully in the two EMC shielded chambers at ESTEC. The performance of the generators/amplifiers subsystems, antennas selection, field amplitude and susceptibility feedback and monitoring systems is described. System control modes which guarantee the AEFGS full operability under different test conditions are discussed. Advantages of automation of susceptibility testing include increased measurement accuracy and testing cost reduction.
Vieira Lopes, Nuno; Mogadouro do Couto, Pedro A; Bustince, Humberto; Melo-Pinto, Pedro
In this paper, an automatic histogram threshold approach based on a fuzziness measure is presented. This work is an improvement of an existing method. Using fuzzy logic concepts, the problems involved in finding the minimum of a criterion function are avoided. Similarity between gray levels is the key to find an optimal threshold. Two initial regions of gray levels, located at the boundaries of the histogram, are defined. Then, using an index of fuzziness, a similarity process is started to find the threshold point. A significant contrast between objects and background is assumed. Previous histogram equalization is used in small contrast images. No prior knowledge of the image is required.
Azzopardi, Gabriella; Salvachua Ferrando, Belen Maria; Mereghetti, Alessio; Bruce, Roderik; Redaelli, Stefano; CERN. Geneva. ATS Department
The LHC is equipped with a complex collimation system to protect sensitive equipment from unavoidable beam losses. Collimators are positioned close to the beam using an alignment procedure. Until now they have always been aligned assuming no tilt between the collimator and the beam, however, tank misalignments or beam envelope angles at large-divergence locations could introduce a tilt limiting the collimation performance. Three different algorithms were implemented to automatically align a chosen collimator at various angles. The implementation was tested on a number of collimators during this MD and no human intervention was required.
Full Text Available The paper addresses the problem of the automatic distortion removal from images acquired with non-metric SLR camera equipped with prime lenses. From the photogrammetric point of view the following question arises: is the accuracy of distortion control data provided by the manufacturer for a certain lens model (not item sufficient in order to achieve demanded accuracy? In order to obtain the reliable answer to the aforementioned problem the two kinds of tests were carried out for three lens models.
Castello, R.; Mili, R.; Tollis, I.G.; Winter, V.
In this paper we present an approach that facilitates the validation of high consequence system requirements. This approach consists of automatically generating a graphical representation from an informal document. Our choice of a graphical notation is statecharts. We proceed in two steps: we first extract a hierarchical decomposition tree from a textual description, then we draw a graph that models the statechart in a hierarchical fashion. The resulting drawing is an effective requirements assessment tool that allows the end user to easily pinpoint inconsistencies and incompleteness
Development of an automatic molten uranium temperature control system for use on batch-type induction casting furnaces is described. Implementation of a two-color optical pyrometer, development of an optical scanner for the pyrometer, determination of furnace thermal dynamics, and design of control systems are addressed. The optical scanning system is shown to greatly improve pyrometer measurement repeatability, particularly where heavy floating slag accumulations cause surface temperature gradients. Thermal dynamics of the furnaces were determined by applying least-squares system identification techniques to actual production data. A unity feedback control system utilizing a proportional-integral-derivative compensator is designed by using frequency-domain techniques. 14 refs
Zhang, Jian; Ma, Feifei
This book reviews the state-of-the-art in combinatorial testing, with particular emphasis on the automatic generation of test data. It describes the most commonly used approaches in this area - including algebraic construction, greedy methods, evolutionary computation, constraint solving and optimization - and explains major algorithms with examples. In addition, the book lists a number of test generation tools, as well as benchmarks and applications. Addressing a multidisciplinary topic, it will be of particular interest to researchers and professionals in the areas of software testing, combi
Full Text Available The paper describes the design and implementation of an infrared (IR thermometer with automatic emissivity correction. The temperature measurement is carried out by the simple digital thermopile sensor MLX90614. The emissivity correction is based on benefits of diffuse reflecting materials and it uses an IR laser diode in conjunction with a selective amplifier. Moreover, the paper includes the design of the control interface with a graphics LCD. Furthermore, this paper describes the power supply unit with a Li-ion cell controlled by basic integrated circuits.
Cindro, M.; Vokal Nemec, B.
The Slovenian Nuclear Safety Administration gathers all on-line dose rate data measured by the various automatic networks operating throughout the territory of Slovenia. With the help of the PHARE financing program and in close cooperation with the Environmental agency of RS the upgrade of the existing network begun in 2005 and was finished in March 2006. The upgrade provided new measuring sites with all relevant data needed in case of a radiological accident. Even bigger improvement was made in the area of data presentation and analysis, which was the main shortcoming of the old system. (author)
Full Text Available Two conceptual developments in the Bayesian automatic adaptive quadrature approach to the numerical solution of one-dimensional Riemann integrals [Gh. Adam, S. Adam, Springer LNCS 7125, 1–16 (2012] are reported. First, it is shown that the numerical quadrature which avoids the overcomputing and minimizes the hidden floating point loss of precision asks for the consideration of three classes of integration domain lengths endowed with specific quadrature sums: microscopic (trapezoidal rule, mesoscopic (Simpson rule, and macroscopic (quadrature sums of high algebraic degrees of precision. Second, sensitive diagnostic tools for the Bayesian inference on macroscopic ranges, coming from the use of Clenshaw-Curtis quadrature, are derived.
Sturm, Bob L.
We re-implement and test two state-of-the-art systems for automatic music genre classification; but unlike past works in this area, we look closer than ever before at their behavior. First, we look at specific instances where each system consistently applies the same wrong label across multiple...... trials of cross-validation. Second, we test the robustness of each system to spectral equalization. Finally, we test how well human subjects recognize the genres of music excerpts composed by each system to be highly genre representative. Our results suggest that neither high-performing system has...... a capacity to recognize music genre....
Whole community shotgun sequencing of total DNA (i.e. metagenomics) and total RNA (i.e. metatranscriptomics) has provided a wealth of information in the microbial community structure, predicted functions, metabolic networks, and is even able to reconstruct complete genomes directly. Here we present ATLAS (Automatic Tool for Local Assembly Structures) a comprehensive pipeline for assembly, annotation, genomic binning of metagenomic and metatranscriptomic data with an integrated framework for Multi-Omics. This will provide an open source tool for the Multi-Omic community at large.
Adam, Gh.; Adam, S.
Two conceptual developments in the Bayesian automatic adaptive quadrature approach to the numerical solution of one-dimensional Riemann integrals [Gh. Adam, S. Adam, Springer LNCS 7125, 1-16 (2012)] are reported. First, it is shown that the numerical quadrature which avoids the overcomputing and minimizes the hidden floating point loss of precision asks for the consideration of three classes of integration domain lengths endowed with specific quadrature sums: microscopic (trapezoidal rule), mesoscopic (Simpson rule), and macroscopic (quadrature sums of high algebraic degrees of precision). Second, sensitive diagnostic tools for the Bayesian inference on macroscopic ranges, coming from the use of Clenshaw-Curtis quadrature, are derived.
Hetero Helix is a software environment which supports relatively large robotic system development projects. The environment supports a heterogeneous set of message-passing LAN-connected common-bus multiprocessors, but the programming model seen by software developers is a simple shared memory. The conceptual simplicity of shared memory makes it an extremely attractive programming model, especially in large projects where coordinating a large number of people can itself become a significant source of complexity. We present results from three system development efforts conducted at Oak Ridge National Laboratory over the past several years. Each of these efforts used automatic software generation to create 10 to 20 percent of the system
Novozámský, Adam; Flusser, Jan; Tachecí, Ilja; Sulík, Lukáš; Bureš, Jan; Krejcar, Ondřej
We propose two automatic methods for detecting bleeding in wireless capsule endoscopy videos of the small intestine. The first one uses solely the color information, whereas the second one incorporates the assumptions about the blood spot shape and size. The original idea is namely the definition of a new color space that provides good separability of blood pixels and intestinal wall. Both methods can be applied either individually or their results can be fused together for the final decision. We evaluate their individual performance and various fusion rules on real data, manually annotated by an endoscopist.
This work combines interdisciplinary knowledge and experience from research fields of psychology, linguistics, audio-processing, machine learning, and computer science. The work systematically explores a novel research topic devoted to automated modeling of personality expression from speech. For this aim, it introduces a novel personality assessment questionnaire and presents the results of extensive labeling sessions to annotate the speech data with personality assessments. It provides estimates of the Big 5 personality traits, i.e. openness, conscientiousness, extroversion, agreeableness, and neuroticism. Based on a database built on the questionnaire, the book presents models to tell apart different personality types or classes from speech automatically.
Szasz, T.; Nagy Czirok, Cs.; Batki, L.; Antal, S.
The patent of a dose-rate controlling equipment that can be attached to X-ray image-amplifiers is presented. In the new equipment the current of the photocatode of the image-amplifier is led into the regulating unit, which controls the X-ray generator automatically. The advantages of the equipment are the following: it can be simply attached to any type of X-ray image-amplifier, it accomplishes fast and sensitive regulation, it makes possible the control of both the mA and the kV values, it is attached to the most reliable point of the image-transmission chain. (L.E.)
Full Text Available This paper describes an investigation of the external search engine optimization (SEO action planning tool, dedicated to automatically extract a small set of most important keywords for each month during whole year period. The keywords in the set are extracted accordingly to external measured parameters, such as average number of searches during the year and for every month individually. Additionally the position of the optimized web site for each keyword is taken into account. The generated optimization plan is similar to the optimization plans prepared manually by the SEO professionals and can be successfully used as a support tool for web site search engine optimization.
Jackson, D.D.; Hollen, R.M.
Highly precise assay of plutonium metal is required for accountability measurements. We have developed an automatic titrator for this determination which eliminates analyst bias and requires much less analyst time. The analyst is only required to enter sample data and start the titration. The automated instrument titrates the sample, locates the end point, and outputs the results as a paper tape printout. Precision of the titration is less than 0.03% relative standard deviation for a single determination at the 250-mg plutonium level. The titration time is less than 5 min
Lu, Kongkuo; Hall, Christopher S.
Breast cancer is the fastest growing cancer, accounting for 29%, of new cases in 2012, and second leading cause of cancer death among women in the United States and worldwide. Ultrasound (US) has been used as an indispensable tool for breast cancer detection/diagnosis and treatment. In computer-aided assistance, lesion segmentation is a preliminary but vital step, but the task is quite challenging in US images, due to imaging artifacts that complicate detection and measurement of the suspect lesions. The lesions usually present with poor boundary features and vary significantly in size, shape, and intensity distribution between cases. Automatic methods are highly application dependent while manual tracing methods are extremely time consuming and have a great deal of intra- and inter- observer variability. Semi-automatic approaches are designed to counterbalance the advantage and drawbacks of the automatic and manual methods. However, considerable user interaction might be necessary to ensure reasonable segmentation for a wide range of lesions. This work proposes an automatic enhancement approach to improve the boundary searching ability of the live wire method to reduce necessary user interaction while keeping the segmentation performance. Based on the results of segmentation of 50 2D breast lesions in US images, less user interaction is required to achieve desired accuracy, i.e. live-wire segmentation.
Ho, Kevin I. C.; Chen, Tung-Shou; Ho, Jun-Der
Due to the dramatic growth of network and multimedia technology, people can more easily get variant information by using Internet. Unfortunately, it also makes the diffusion of illegal and harmful content much easier. So, it becomes an important topic for the Internet society to protect and safeguard Internet users from these content that may be encountered while surfing on the Net, especially children. Among these content, porno graphs cause more serious harm. Therefore, in this study, we propose an automatic system to detect still colour porno graphs. Starting from this result, we plan to develop an automatic system to search porno graphs or to filter porno graphs. Almost all the porno graphs possess one common characteristic that is the ratio of the size of skin region and non-skin region is high. Based on this characteristic, our system first converts the colour space from RGB colour space to HSV colour space so as to segment all the possible skin-colour regions from scene background. We also apply the texture analysis on the selected skin-colour regions to separate the skin regions from non-skin regions. Then, we try to group the adjacent pixels located in skin regions. If the ratio is over a given threshold, we can tell if the given image is a possible porno graph. Based on our experiment, less than 10% of non-porno graphs are classified as pornography, and over 80% of the most harmful porno graphs are classified correctly.
This presentation is a report of the studies carried out by the Work Group on Functioning Safety of Programmable Automatic Control Devices and by the Group for Prevention Studies (GEP) from the CEA. The objective of these groups is to evaluate the methods which could be used to estimate the functioning safety of control and instrumentation systems involved in the Important Elements for Safety (EIS) of the Basic Nuclear Installations (INB) of the CEA, and also to carry out a qualification of automatic control devices. Norms, protocols and tools for the evaluation are presented. The problem comprises two aspects: the evaluation of fault avoidance techniques and the evaluation of fault control techniques used during the conceiving. For the fault avoidance techniques, the quality assurance organization, the environment tests, and the software quality plans are considered. For the fault control techniques, the different available tools and fault injection models are analysed. The results of an analysis carried out with the DEF.I tool from the National Institute for Research and Safety (INRS) are reported. (J.S.). 23 refs
Chui Wei, How; Salleh, S. M.; Ezree, Abdullah Mohd; Zaman, I.; Hatta, M. H.; Zain, B. A. Md; Mahzan, S.; Rahman, M. N. A.; Mahmud, W. A. W.
Nation Plan of action for management of fishing is target to achieve an efficient, equitable and transparent management of fishing capacity in marine capture fisheries by 2018. However, several factors influence the fishery production and efficiency of marine system such as automatic fish feeder machine could be taken in consideration. Two latest fish feeder machines have been chosen as the reference for this study. Based on the observation, it has found that the both machine was made with heavy structure, low water and temperature resistance materials. This research’s objective is to develop the automatic feeder machine to increase the efficiency of fish feeding. The experiment has conducted to testing the new design of machine. The new machine with maximum storage of 5 kg and functioning with two DC motors. This machine able to distribute 500 grams of pellets within 90 seconds and longest distance of 4.7 meter. The higher speed could reduce time needed and increase the distance as well. The minimum speed range for both motor is 110 and 120 with same full speed range of 255.
Liao, Shu; Zhan, Yiqiang; Dong, Zhongxing; Yan, Ruyi; Gong, Liyan; Zhou, Xiang Sean; Salganicoff, Marcos; Fei, Jun
Lumbar spondylolisthesis is one of the most common spinal diseases. It is caused by the anterior shift of a lumbar vertebrae relative to subjacent vertebrae. In current clinical practices, staging of spondylolisthesis is often conducted in a qualitative way. Although meyerding grading opens the door to stage spondylolisthesis in a more quantitative way, it relies on the manual measurement, which is time consuming and irreproducible. Thus, an automatic measurement algorithm becomes desirable for spondylolisthesis diagnosis and staging. However, there are two challenges. 1) Accurate detection of the most anterior and posterior points on the superior and inferior surfaces of each lumbar vertebrae. Due to the small size of the vertebrae, slight errors of detection may lead to significant measurement errors, hence, wrong disease stages. 2) Automatic localize and label each lumbar vertebrae is required to provide the semantic meaning of the measurement. It is difficult since different lumbar vertebraes have high similarity of both shape and image appearance. To resolve these challenges, a new auto measurement framework is proposed with two major contributions: First, a learning based spine labeling method that integrates both the image appearance and spine geometry information is designed to detect lumbar vertebrae. Second, a hierarchical method using both the population information from atlases and domain-specific information in the target image is proposed for most anterior and posterior points positioning. Validated on 258 CT spondylolisthesis patients, our method shows very similar results to manual measurements by radiologists and significantly increases the measurement efficiency.
Hteik Htar Lwin
Full Text Available Abstract Most doors are controlled by persons with the use of keys security cards password or pattern to open the door. Theaim of this paper is to help users forimprovement of the door security of sensitive locations by using face detection and recognition. Face is a complex multidimensional structure and needs good computing techniques for detection and recognition. This paper is comprised mainly of three subsystems namely face detection face recognition and automatic door access control. Face detection is the process of detecting the region of face in an image. The face is detected by using the viola jones method and face recognition is implemented by using the Principal Component Analysis PCA. Face Recognition based on PCA is generally referred to as the use of Eigenfaces.If a face is recognized it is known else it is unknown. The door will open automatically for the known person due to the command of the microcontroller. On the other hand alarm will ring for the unknown person. Since PCA reduces the dimensions of face images without losing important features facial images for many persons can be stored in the database. Although many training images are used computational efficiency cannot be decreased significantly. Therefore face recognition using PCA can be more useful for door security system than other face recognition schemes.
A subtask in integration of design and control of chemical processes is the selection of a control structure. Automating the selection of the control structure enables sequential integration of process and controld esign. As soon as the process is specified or computed, a structure for decentrali......A subtask in integration of design and control of chemical processes is the selection of a control structure. Automating the selection of the control structure enables sequential integration of process and controld esign. As soon as the process is specified or computed, a structure...... for decentralized control is determined automatically, and the resulting decentralized control structure is automatically tuned using standard techniques. Dynamic simulation of the resulting process system gives immediate feedback to the process design engineer regarding practical operability of the process....... The control structure selection problem is formulated as a special MILP employing cost coefficients which are computed using Parseval's theorem combined with RGA and IMC concepts. This approach enables selection and tuning of large-scale plant-wide decentralized controllers through efficient combination...
Jørgensen, John Bagterp; Jørgensen, Sten Bay
A subtask in integration of design and control of chemical processes is the selection of a control structure. Automating the selection of the control structure enables sequential integration of process and control design. As soon as the process is specified or computed, a structure for decentrali......A subtask in integration of design and control of chemical processes is the selection of a control structure. Automating the selection of the control structure enables sequential integration of process and control design. As soon as the process is specified or computed, a structure...... for decentralized control is determined automatically, and the resulting decentralized control structure is automatically tuned using standard techniques. Dynamic simulation of the resulting process system gives immediate feedback to the process design engineer regarding practical operability of the process....... The control structure selection problem is formulated as a special MILP employing cost coefficients which are computed using Parseval's theorem combined with RGA and IMC concepts. This approach enables selection and tuning of large-scale plant-wide decentralized controllers through efficient combination...
Troglio, Giulia; Le Moigne, Jacqueline; Benediktsson, Jon A.; Moser, Gabriele; Serpico, Sebastiano B.
With the launch of several planetary missions in the last decade, a large amount of planetary images has already been acquired and much more will be available for analysis in the coming years. The image data need to be analyzed, preferably by automatic processing techniques because of the huge amount of data. Although many automatic feature extraction methods have been proposed and utilized for Earth remote sensing images, these methods are not always applicable to planetary data that often present low contrast and uneven illumination characteristics. Different methods have already been presented for crater extraction from planetary images, but the detection of other types of planetary features has not been addressed yet. Here, we propose a new unsupervised method for the extraction of different features from the surface of the analyzed planet, based on the combination of several image processing techniques, including a watershed segmentation and the generalized Hough Transform. The method has many applications, among which image registration and can be applied to arbitrary planetary images.
Moreno, R; Vega, J; Murari, A
The loss of stability and confinement in tokamak plasmas can induce critical events known as disruptions. Disruptions produce strong electromagnetic forces and thermal loads which can damage fundamental components of the devices. Determining the disruption time is extremely important for various disruption studies: theoretical models, physics-driven models, or disruption predictors. In JET, during the experimental campaigns with the JET-C (Carbon Fiber Composite) wall, a common criterion to determine the disruption time consisted of locating the time of the thermal quench. However, with the metallic ITER-like wall (JET-ILW), this criterion is usually not valid. Several thermal quenches may occur previous to the current quench but the temperature recovers. Therefore, a new criterion has to be defined. A possibility is to use the start of the current quench as disruption time. This work describes the implementation of an automatic data processing method to estimate the disruption time according to this new definition. This automatic determination allows both reducing human efforts to locate the disruption times and standardizing the estimates (with the benefit of being less vulnerable to human errors).
Li, Chunhua; Zhao, Pengpeng; Sheng, Victor S; Xian, Xuefeng; Wu, Jian; Cui, Zhiming
Machine-constructed knowledge bases often contain noisy and inaccurate facts. There exists significant work in developing automated algorithms for knowledge base refinement. Automated approaches improve the quality of knowledge bases but are far from perfect. In this paper, we leverage crowdsourcing to improve the quality of automatically extracted knowledge bases. As human labelling is costly, an important research challenge is how we can use limited human resources to maximize the quality improvement for a knowledge base. To address this problem, we first introduce a concept of semantic constraints that can be used to detect potential errors and do inference among candidate facts. Then, based on semantic constraints, we propose rank-based and graph-based algorithms for crowdsourced knowledge refining, which judiciously select the most beneficial candidate facts to conduct crowdsourcing and prune unnecessary questions. Our experiments show that our method improves the quality of knowledge bases significantly and outperforms state-of-the-art automatic methods under a reasonable crowdsourcing cost.
Full Text Available Customized manufacturing is increasing years by years. The consumption habits change has been cause the shorter of product life cycle. Therefore, many countries view industry 4.0 as a target to achieve more efficient and more flexible automated production. To develop an automatic loading and unloading CNC machining system via vision inspection is the first step in industrial upgrading. CNC controller is adopted as the main controller to command to the robot, conveyor, and other equipment in this study. Moreover, machine vision systems are used to detect position of material on the conveyor and the edge of the machining material. In addition, Open CNC and SCADA software will be utilized to make real-time monitor, remote system of control, alarm email notification, and parameters collection. Furthermore, RFID has been added to employee classification and management. The machine handshaking has been successfully proposed to achieve automatic vision detect, edge tracing measurement, machining and system parameters collection for data analysis to accomplish industrial automation system integration with real-time monitor.
Abdallah, Mahmoud A.; Samu, Tayib I.; Grissom, William A.
Neural network theories are applied to attain human-like performance in areas such as speech recognition, statistical mapping, and target recognition or identification. In target identification, one of the difficult tasks has been the extraction of features to be used to train the neural network which is subsequently used for the target's identification. The purpose of this paper is to describe the development of an automatic target identification system using features extracted from a specific class of targets. The extracted features were the graphical representations of the silhouettes of the targets. Image processing techniques and some Fast Fourier Transform (FFT) properties were implemented to extract the features. The FFT eliminates variations in the extracted features due to rotation or scaling. A Neural Network was trained with the extracted features using the Learning Vector Quantization paradigm. An identification system was set up to test the algorithm. The image processing software was interfaced with MATLAB Neural Network Toolbox via a computer program written in C language to automate the target identification process. The system performed well as at classified the objects used to train it irrespective of rotation, scaling, and translation. This automatic target identification system had a classification success rate of about 95%.
Mario A Marchisio
Full Text Available De novo computational design of synthetic gene circuits that achieve well-defined target functions is a hard task. Existing, brute-force approaches run optimization algorithms on the structure and on the kinetic parameter values of the network. However, more direct rational methods for automatic circuit design are lacking. Focusing on digital synthetic gene circuits, we developed a methodology and a corresponding tool for in silico automatic design. For a given truth table that specifies a circuit's input-output relations, our algorithm generates and ranks several possible circuit schemes without the need for any optimization. Logic behavior is reproduced by the action of regulatory factors and chemicals on the promoters and on the ribosome binding sites of biological Boolean gates. Simulations of circuits with up to four inputs show a faithful and unequivocal truth table representation, even under parametric perturbations and stochastic noise. A comparison with already implemented circuits, in addition, reveals the potential for simpler designs with the same function. Therefore, we expect the method to help both in devising new circuits and in simplifying existing solutions.
Full Text Available Abstract Electricity is now more than a necessity and its need is increasing day by day resulting in power theft and power scarcity. The purpose of this project is to provide automatic control and monitoring of the Domestic Energy Meter enabling the Electricity Department to read meter readings without anyone visiting each house and also prevent electricity theft .This can be achieved by the use of a Microcontroller Unit that continuously monitors and records the Energy Meter readings in its permanent memory location. This system also makes use of a GSM module for remote monitoring and control of Energy Meter with the help of an interfacing circuitry. The Microcontroller based system continuously records the readings and the live meter reading can be sent to the Electricity department after a count period or on request. This system also can be used to disconnect the power supply to the house in case of non-payment of electricity bills. The Substation will be the receiving end. The data received is fed to a microcontroller at the Substation which will automatically calculate the bill based on tariff provider and display it.
Picking the first breaks is an important step in seismic processing. The large volume of the seismic data calls for automatic and objective picking. We introduce a new automatic first-break picker, which uses specifically designed time windows and an iterative procedure based on the instantaneous traveltime attribute. The method is fast as it only uses a few FFT\\'s per trace. We demonstrate the effectiveness of this automatic method by applying it on real test data.
This book examines mechatronics and automatic control systems. The book covers important emerging topics in signal processing, control theory, sensors, mechanic manufacturing systems and automation. The book presents papers from the second International Conference on Mechatronics and Automatic Control Systems held in Beijing, China on September 20-21, 2014. Examines how to improve productivity through the latest advanced technologies Covering new systems and techniques in the broad field of mechatronics and automatic control systems.
Clustering analysis is important in datamining for unsupervised data, cause no adequate prior knowledge. One of the important tasks is defining the number of clusters without user involvement that is known as automatic clustering. This study intends on acquiring cluster number automatically utilizing forced strategy differential evolution (AC-FSDE). Two mutation parameters, namely: constant parameter and variable parameter are employed to boost differential evolution performance. Four well-known benchmark datasets were used to evaluate the algorithm. Moreover, the result is compared with other state of the art automatic clustering methods. The experiment results evidence that AC-FSDE is better or competitive with other existing automatic clustering algorithm.
Weill, J.; Deiss, M.; Mercier, R.
Within the framework of the activities of the Autonomous Reactor Electronics Section we have developed a device, which renders automatic one type of measurement carried out in the Physical Chemistry Department at the Saclay Research Centre. We define here: - the physico-chemical principle of the apparatus which is adapted to the measurement of atomic oxygen concentrations; - the physical principle of the automatic measurement; - the properties, performance, constitution, use and maintenance of the automatic measurement device. It is concluded that the principle of the automatic device, whose tests have confirmed the estimation of the theoretical performance, could usefully be adapted to other types of measurement. (authors) [fr
.... The analytical chemistry literature lacks an adequate automatic titration method for the monitoring of chromic acid in chromium plating solutions and the monitoring of phosphoric and sulfuric acids...
Alings, Marco; Vorstenbosch, Jan-Mark; Reeve, Helen
Worldwide, the number of implants of pacemakers is steadily increasing and this poses an incremental burden on outpatient clinics. While device manufacturers have developed safe and effective automatic algorithms to lighten this workload, the clinical utilization of these algorithms has not been well studied. The Automaticity study is the first large-scale, worldwide registry to evaluate physician's acceptance of automatic algorithms for ventricular capture, automatic sensing, and automatic optimization of sensor settings. The primary objective of the registry is to determine the percentage of patients who have any of the 'Automaticity Algorithms' reprogrammed within 12 months of pacemaker implant. Patients will be implanted with a commercially available pacemaker (Insignia I/Nexus I Ultra or Insignia I/Nexus I AVT, Boston Scientific CRM, St Paul, MN, USA). At discharge, all the 'Automaticity Algorithms' are to be programmed to 'Auto/On'. Data collection on changes in device programming, physician's perception of algorithm function, and adverse events will occur for 12 months following device implant. The Automaticity study is the first large-scale, prospective, multi-site, international registry designed to assess the long-term acceptance of automatic pacemaker algorithms for adjustment of the ventricular output, atrial and ventricular sensitivity, and optimization of minute ventilation and accelerometer settings.
Suhairy Sani; Mohd Hanif Md Saad; Marzuki Mustafa; Mohd Redzwan Rosli
This paper is concerned with the real time automatic discriminating of flaws from two categories; i. cracks (planar defect) and ii. Non-cracks (volumetric defect such as cluster porosity and slag) using pulse-echo ultrasound. The raw ultrasonic flaws signal were collected from a computerized robotic plane scanning system over the whole of each reflector as the primary source of data. The signal is then filtered and the analysis in both time and frequency domain were executed to obtain the selected feature. The real time feature analysis techniques measured the number of peaks, maximum index, pulse duration, rise time and fall time. The obtained features could be used to distinguish between quantitatively classified flaws by using various tools in artificial intelligence such as neural networks. The proposed algorithm and complete system were implemented in a computer software developed using Microsoft Visual BASIC 6.0 (author)
Kirkedal, Andreas Søeborg
Automatic speech recognition (ASR) uses dictionaries that map orthographic words to their phonetic representation. To minimize the occurrence of out-of-vocabulary words, ASR requires large phonetic dictionaries to model pronunciation. Hand-crafted high-quality phonetic dictionaries are difficult...... for particular words and word classes in addition. In comparison, English has 5,852 spelling-tophoneme rules and 4,133 additional rules and 8,278 rules and 3,829 additional rules. Phonix applies deep morphological analysis as a preprocessing step. Should the analysis fail, several fallback strategies...... to dictionary lookup, compound splitting and letter-to-sound rules. Phonix and eSpeak will be compared in an ASR scenario using the Kaldi speech recognition toolkit (Povey et al., 2011) and compared to a graphemic baseline. Also a mapping between the phonetic alphabets, which are both based on X-Sampa or IPA...
Jawas, N.; Indrianto
Water meter is used as a tool to calculate water consumption. This tool works by utilizing water flow and shows the calculation result with mechanical digit counter. Practically, in everyday use, an operator will manually check the digit counter periodically. The Operator makes logs of the number shows by water meter to know the water consumption. This manual operation is time consuming and prone to human error. Therefore, in this paper we propose an automatic water meter digit reader from digital image. The digits sequence is detected by utilizing contour information of the water meter front panel.. Then an OCR method is used to get the each digit character. The digit sequence detection is an important part of overall process. It determines the success of overall system. The result shows promising results especially in sequence detection.
Sang, Ru; Yu, Guiying; Fan, Weijun; Guo, Tiantai
As the main objects, imagoes have been researched in quarantine pest recognition in these days. However, pests in their larval stage are latent, and the larvae spread abroad much easily with the circulation of agricultural and forest products. It is presented in this paper that, as the new research objects, larvae are recognized by means of machine vision, image processing and pattern recognition. More visional information is reserved and the recognition rate is improved as color image segmentation is applied to images of larvae. Along with the characteristics of affine invariance, perspective invariance and brightness invariance, scale invariant feature transform (SIFT) is adopted for the feature extraction. The neural network algorithm is utilized for pattern recognition, and the automatic identification of larvae images is successfully achieved with satisfactory results.
Calkins, Noel C.
Method and apparatus for ultrasonic machining in which feeding of a tool assembly holding a machining tool toward a workpiece is accomplished automatically. In ultrasonic machining, a tool located just above a workpiece and vibrating in a vertical direction imparts vertical movement to particles of abrasive material which then remove material from the workpiece. The tool does not contact the workpiece. Apparatus for moving the tool assembly vertically is provided such that it operates with a relatively small amount of friction. Adjustable counterbalance means is provided which allows the tool to be immobilized in its vertical travel. A downward force, termed overbalance force, is applied to the tool assembly. The overbalance force causes the tool to move toward the workpiece as material is removed from the workpiece.
Piccoli, Valentina; Fantoni, Carlo; Foroni, Francesco; Bianchi, Mauro; Carnaghi, Andrea
In this study, we investigate whether hormonal shifts during the menstrual cycle contribute to the dehumanization of other women and men. Female participants with different levels of likelihood of conception (LoC) completed a semantic priming paradigm in a lexical decision task. When the word 'woman' was the prime, animal words were more accessible in high versus low LoC whereas human words were more inhibited in the high versus low LoC. When the word 'man' was used as the prime, no difference was found in terms of accessibility between high and low LoC for either animal or human words. These results show that the female dehumanization is automatically elicited by menstrual cycle-related processes and likely associated with an enhanced activation of mate-attraction goals. © 2016 The British Psychological Society.
Alavijeh, Amir Hossein Poorjam; Hesaraki, Soheila; Safavi, Saeid
This paper proposes an automatic smoking habit detection from spontaneous telephone speech signals. In this method, each utterance is modeled using i-vector and non-negative factor analysis (NFA) frameworks, which yield low-dimensional representation of utterances by applying factor analysis...... on Gaussian mixture model means and weights respectively. Each framework is evaluated using different classification algorithms to detect the smoker speakers. Finally, score-level fusion of the i-vector-based and the NFA-based recognizers is considered to improve the classification accuracy. The proposed...... method is evaluated on telephone speech signals of speakers whose smoking habits are known drawn from the National Institute of Standards and Technology (NIST) 2008 and 2010 Speaker Recognition Evaluation databases. Experimental results over 1194 utterances show the effectiveness of the proposed approach...
The goal of this research is to improve the performance of automated schedulers by designing and implementing an algorithm by automatically generating heuristics by selecting a schedule. The particular application selected by applying this method solves the problem of scheduling telescope observations, and is called the Associate Principal Astronomer. The input to the APA scheduler is a set of observation requests submitted by one or more astronomers. Each observation request specifies an observation program as well as scheduling constraints and preferences associated with the program. The scheduler employs greedy heuristic search to synthesize a schedule that satisfies all hard constraints of the domain and achieves a good score with respect to soft constraints expressed as an objective function established by an astronomer-user.
Alibrandi, Giuseppe; Amendola, Valeria; Bergamaschi, Greta; Dollenz, Riccardo; Fabbrizzi, Luigi; Licchelli, Maurizio; Lo Vecchio, Carmelo
The combined activity of the 1.1.1-cryptand and of a dicopper(II) bistren cryptate complex including chloride makes the Cl(-) ion be continuously and slowly delivered to the solution, without any external intervention. The 1.1.1-cryptand slowly releases OH(-) ions, according to a defined kinetics, and each OH(-) ion displaces a Cl(-) ion from the cryptate. Chloride displacement induces a sharp colour change from bright yellow to aquamarine and can be conveniently monitored spectrophotometrically, even in diluted solutions. The 1.1.1-cryptand is the motor of a molecular dispenser (the dicopper(II) cryptate) delivering chloride ion automatically, from the inside of the solution. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Topic indexing is the task of identifying the main topics covered by a document. These are useful for many purposes: as subject headings in libraries, as keywords in academic publications and as tags on the web. Knowing a document’s topics helps people judge its relevance quickly. However, assigning topics manually is labor intensive. This thesis shows how to generate them automatically in a way that competes with human performance. Three kinds of indexing are investigated: term assignment, a task commonly performed by librarians, who select topics from a controlled vocabulary; tagging, a popular activity of web users, who choose topics freely; and a new method of keyphrase extraction, where topics are equated to Wikipedia article names. A general two-stage algorithm is introduced that first selects candidate topics and then ranks them by significance based on their properties. These properties draw on statistical, semantic, domain-specific and encyclopedic knowledge. They are combined using a machine learn...
Ali Jasim Ramadhan
Full Text Available In this work, a novel system is designed to remote monitor / automatic control of the temperature, humidity and soil moisture of the agricultural greenhouses. In the proposed system, the author used the mentioned sensors for monitoring the climatic conditions of the agricultural greenhouses; and the system makes a controlling process to fix the required parameters for plant growth by running / stopping the fan, air exchanger and irrigation devices when any changes happened in these parameters. The presented system is based on XBee protocol in the implemented wireless sensor star topology network (WSN to monitor the agricultural greenhouses in real time, and used the GSM and Internet technologies to monitor the agricultural greenhouses from anywhere.
Wikipedia - the Free Encyclopedia encounters the problem of proper classification of new articles everyday. The process of assignment of articles to categories is performed manually and it is a time consuming task. It requires knowledge about Wikipedia structure, which is beyond typical editor competence, which leads to human-caused mistakes - omitting or wrong assignments of articles to categories. The article presents application of SVM classifier for automatic classification of documents from The Free Encyclopedia. The classifier application has been tested while using two text representations: inter-documents connections (hyperlinks) and word content. The results of the performed experiments evaluated on hand crafted data show that the Wikipedia classification process can be partially automated. The proposed approach can be used for building a decision support system which suggests editors the best categories that fit new content entered to Wikipedia.
Wardell, Mark; Lougheed, James H.
The motion of ground vehicle targets after a ballistic round is launched can be a major source of inaccuracy for small (handheld) anti-armour weapon systems. A method of automatically measuring the crossing component to compensate the fire control solution has been devised and tested against various targets in a range of environments. A photodetector array aligned with the sight's horizontal reticle obtains scene features, which are digitized and processed to separate target from sight motion. Relative motion of the target against the background is briefly monitored to deduce angular crossing rate and a compensating lead angle is introduced into the aim point. Research to gather quantitative data and optimize algorithm performance is described, and some results from field testing are presented.
Kirkedal, Andreas Søeborg
for English and now extended to cover 50 languages. Due to the nature of open source software, the quality of language support depends greatly on who encoded them. The Danish version was created by a Danish native speaker and contains more than 8,600 spelling-to-phoneme rules and more than 11,000 rules...... for particular words and word classes in addition. In comparison, English has 5,852 spelling-tophoneme rules and 4,133 additional rules and 8,278 rules and 3,829 additional rules. Phonix applies deep morphological analysis as a preprocessing step. Should the analysis fail, several fallback strategies...... to acquire and expensive to create. For languages with productive compounding or agglutinative languages like German and Finnish, respectively, phonetic dictionaries are also hard to maintain. For this reason, automatic phonetic transcription tools have been produced for many languages. The quality...
Full Text Available Aim: To develop a method for automatic contour extraction from a 2D image. Material and Method: The method is divided in two basic parts where the user initially chooses the starting point and the threshold. Finally the method is applied to computed tomography of bone images. Results: An interesting method is developed which can lead to a successful boundary extraction of 2D images. Specifically data extracted from a computed tomography images can be used for 2D bone reconstruction. Conclusions: We believe that such an algorithm or part of it can be applied on several other applications for shape feature extraction in medical image analysis and generally at computer graphics.
Emoto, M., E-mail: email@example.com; Ida, K.; Suzuki, C.; Yoshida, M.; Akiyama, T.; Nakamura, Y.; Sakamoto, R.; Yokoyama, M.; Yoshinuma, M.
Physical data produced by large helical device (LHD) experiments is supplied by the Kaiseki server, and registers more than 200 types of diagnostic data. Dependencies exist amongst the data; i.e., in many cases, the calculation of one data requires other data. Therefore, to obtain unregistered data, one needs to calculate not only the diagnostic data itself but also the dependent data; however, because the data is registered by different scientists, each scientist must separately calculate and register their respective data. To simplify this complicated procedure, we have developed an automatic calculation system called AutoAna. The calculation programs of AutoAna are distributed on a network, and the number of such programs can be easily increased dynamically. Our system is therefore scalable and ready for substantial increases in the size of the target data.
Human fingerprints comprise a series of whorls or ridges. In some special cases, these whorls are broken by so-called secondary creases--collinear breaks across a sequence of adjacent ridges. It is a working hypothesis that the presence of these secondary creases form a physical marker for certain human disorders. A technique to automatically detect such creases in fingerprints is described. This technique utilizes a combination of spatial filtering and region growing to identify the morphology of the locally fragmented fingerprint image. Regions are then thinned to form a skeletal model of the ridge structure. Creases are characterized by collinear terminations on ridges and are isolated by analyzing the Hough transform space derived from the ridge end points. Empirical results using both synthetic and real data are presented and discussed.
Tahir Shah, K.
We construct a model of the RNA world in terms of naturally evolving nucleotide sequences assuming only Crick-Watson base pairing and self-cleaving/splicing capability. These sequences have the following properties. 1) They are recognizable by an automation (or automata). That is, to each k-sequence, there exist a k-automation which accepts, recognizes or generates the k-sequence. These are known as automatic sequences. Fibonacci and Morse-Thue sequences are the most natural outcome of pre-biotic chemical conditions. 2) Infinite (resp. large) sequences are self-similar (resp. nearly self-similar) under certain rewrite rules and consequently give rise to fractal (resp.fractal-like) structures. Computationally, such sequences can also be generated by their corresponding deterministic parallel re-write system, known as a DOL system. The self-similar sequences are fixed points of their respective rewrite rules. Some of these automatic sequences have the capability that they can read or 'accept' other sequences while others can detect errors and trigger error-correcting mechanisms. They can be enlarged and have block and/or palindrome structure. Linear recurring sequences such as Fibonacci sequence are simply Feed-back Shift Registers, a well know model of information processing machines. We show that a mutation of any rewrite rule can cause a combinatorial explosion of error and relates this to oncogenetical behavior. On the other hand, a mutation of sequences that are not rewrite rules, leads to normal evolutionary change. Known experimental results support our hypothesis. (author). Refs
Chen, Jun; Yang, Jin; Guo, Hengyu; Li, Zhaoling; Zheng, Li; Su, Yuanjie; Wen, Zhen; Fan, Xing; Wang, Zhong Lin
Although the triboelectric nanogenerator (TENG) has been proven to be a renewable and effective route for ambient energy harvesting, its robustness remains a great challenge due to the requirement of surface friction for a decent output, especially for the in-plane sliding mode TENG. Here, we present a rationally designed TENG for achieving a high output performance without compromising the device robustness by, first, converting the in-plane sliding electrification into a contact separation working mode and, second, creating an automatic transition between a contact working state and a noncontact working state. The magnet-assisted automatic transition triboelectric nanogenerator (AT-TENG) was demonstrated to effectively harness various ambient rotational motions to generate electricity with greatly improved device robustness. At a wind speed of 6.5 m/s or a water flow rate of 5.5 L/min, the harvested energy was capable of lighting up 24 spot lights (0.6 W each) simultaneously and charging a capacitor to greater than 120 V in 60 s. Furthermore, due to the rational structural design and unique output characteristics, the AT-TENG was not only capable of harvesting energy from natural bicycling and car motion but also acting as a self-powered speedometer with ultrahigh accuracy. Given such features as structural simplicity, easy fabrication, low cost, wide applicability even in a harsh environment, and high output performance with superior device robustness, the AT-TENG renders an effective and practical approach for ambient mechanical energy harvesting as well as self-powered active sensing.
Bonnin, C.; Lesteven, S.; Derriere, S.; Oberto, A.
SIMBAD is a database of astronomical objects that provides (among other things) their bibliographic references in a large number of journals. Currently, these references have to be entered manually by librarians who read each paper. To cope with the increasing number of papers, CDS develops a tool to assist the librarians in their work, taking advantage of the Dictionary of Nomenclature of Celestial Objects, which keeps track of object acronyms and of their origin. The program searches for object names directly in PDF documents by comparing the words with all the formats stored in the Dictionary of Nomenclature. It also searches for variable star names based on constellation names and for a large list of usual names such as Aldebaran or the Crab. Object names found in the documents often correspond to several astronomical objects. The system retrieves all possible matches, displays them with their object type given by SIMBAD, and lets the librarian make the final choice. The bibliographic reference can then be automatically added to the object identifiers in the database. Besides, the systematic usage of the Dictionary of Nomenclature, which is updated manually, permitted to automatically check it and to detect errors and inconsistencies. Last but not least, the program collects some additional information such as the position of the object names in the document (in the title, subtitle, abstract, table, figure caption...) and their number of occurrences. In the future, this will permit to calculate the 'weight' of an object in a reference and to provide SIMBAD users with an important new information, which will help them to find the most relevant papers in the object reference list.
Beam steering is done by modifying the current in a trim or bending magnet. If the current change is the right amount the beam can be made to bend in such a manner that it will hit a swic or BPM downstream from the magnet at a predetermined set point. Although both bending magnets and trim magnets can be used to modify beam angle, beam steering is usually done with trim magnets. This is so because, during beam steering the beam angle is usually modified only by a small amount which can be easily achieved with a trim magnet. Thus in this note, all steering magnets will be assumed to be trim magnets. There are two ways of monitoring beam position. One way is done using a BPM and the other is done using a swic. For simplicity, beam position monitoring in this paper will be referred to being done with a swic. Beam steering can be done manually by changing the current through a trim magnet and monitoring the position of the beam downstream from the magnet with a swic. Alternatively the beam can be positioned automatically using a computer which periodically updates the current through a specific number of trim magnets. The purpose of this note is to describe the steps involved in coming up with such a computer program. There are two main aspects to automatic beam steering. First a relationship between the beam position and the bending magnet is needed. Secondly a beamline setup of swics and trim magnets has to be chosen that will position the beam according to the desired specifications. A simple example will be looked at that will show that once a mathematical relationship between the needed change of the beam position on a swic and the change in trim currents is established, a computer could be programmed to calculate and update the trim currents
Yu, Zhenwei; Tsai, Jeffrey J P; Weigert, Thomas
An intrusion detection system (IDS) is a security layer used to detect ongoing intrusive activities in information systems. Traditionally, intrusion detection relies on extensive knowledge of security experts, in particular, on their familiarity with the computer system to be protected. To reduce this dependence, various data-mining and machine learning techniques have been deployed for intrusion detection. An IDS is usually working in a dynamically changing environment, which forces continuous tuning of the intrusion detection model, in order to maintain sufficient performance. The manual tuning process required by current systems depends on the system operators in working out the tuning solution and in integrating it into the detection model. In this paper, an automatically tuning IDS (ATIDS) is presented. The proposed system will automatically tune the detection model on-the-fly according to the feedback provided by the system operator when false predictions are encountered. The system is evaluated using the KDDCup'99 intrusion detection dataset. Experimental results show that the system achieves up to 35% improvement in terms of misclassification cost when compared with a system lacking the tuning feature. If only 10% false predictions are used to tune the model, the system still achieves about 30% improvement. Moreover, when tuning is not delayed too long, the system can achieve about 20% improvement, with only 1.3% of the false predictions used to tune the model. The results of the experiments show that a practical system can be built based on ATIDS: system operators can focus on verification of predictions with low confidence, as only those predictions determined to be false will be used to tune the detection model.
Arganda-Carreras, Ignacio; Fernandez-Gonzalez, Rodrigo; Ortiz-de-Solorzano, Carlos
We present two new methods for automatic registration of microscope images of consecutive tissue sections. They represent two possibilities for the first step in the 3-D reconstruction of histological structures from serially sectioned tissue blocks. The goal is to accurately align the sections in order to place every relevant shape contained in each image in front of its corresponding shape in the following section before detecting the structures of interest and rendering them in 3D. This is accomplished by finding the best rigid body transformation (translation and rotation) of the image being registered by maximizing a matching function based on the image content correlation. The first method makes use of the entire image information, whereas the second one uses only the information located at specific sites, as determined by the segmentation of the most relevant tissue structures. To reduce computing time, we use a multiresolution pyramidal approach that reaches the best registration transformation in increasing resolution steps. In each step, a subsampled version of the images is used. Both methods rely on a binary image which is a thresholded version of the Sobel gradients of the image (first method) or a set of boundaries manually or automatically obtained that define important histological structures of the sections. Then distance-transform of the binary image is computed. A proximity function is then calculated between the distance image of the image being registered and that of the reference image. The transformation providing a maximum of the proximity function is then used as the starting point of the following step. This is iterated until the registration error lies below a minimum value.
... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Mobile equipment; automatic warning devices. 77... UNDERGROUND COAL MINES Safeguards for Mechanical Equipment § 77.410 Mobile equipment; automatic warning devices. (a) Mobile equipment such as front-end loaders, forklifts, tractors, graders, and trucks, except...
Bulacu, Marius Lucian
The thesis addresses the problem of automatic person identification using scanned images of handwriting.Identifying the author of a handwritten sample using automatic image-based methods is an interesting pattern recognition problem with direct applicability in the forensic and historic document
... URBAN DEVELOPMENT SECTION 8 TENANT BASED ASSISTANCE: HOUSING CHOICE VOUCHER PROGRAM Housing Assistance Payments Contract and Owner Responsibility § 982.455 Automatic termination of HAP contract. The HAP contract terminates automatically 180 calendar days after the last housing assistance payment to the owner...
... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Automatic radiographic film processor. 892.1900 Section 892.1900 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES... processor. (a) Identification. An automatic radiographic film processor is a device intended to be used to...
Abstract. The focus of this paper is to automatically segment and label continu- ous speech signal into syllable-like units for Indian languages. In this approach, the continuous speech signal is first automatically segmented into syllable-like units using group delay based algorithm. Similar syllable segments are then grouped.
Richard W. Conners; Tai-Hoon Cho; Chong T. Ng; Thomas H. Drayer; Joe G. Tront; Philip A. Araman; Robert L. Brisbon
Any automatic system for grading hardwood lumber can conceptually be divided into two components. One of these is a machine vision system for locating and identifying grading defects. The other is an automatic grading program that accepts as input the output of the machine vision system and, based on these data, determines the grade of a board. The progress that has...
Millett, A. V.
Automatic reel on automatic welding equipment takes up slack in the reel-fed filler wire when welding operation is terminated. The reel maintains constant, adjustable tension on the wire during the welding operation and rewinds the wire from the wire feed unit when the welding is completed.
Bijl, R.; Kooistra, S.R.; Hogeveen, H.
Several studies have reported on the profitability of automatic milking based on different simulation models, but a data-based study using actual farm data has been lacking. The objective of this study was to analyze the profitability of dairy farms having an automatic milking system (AMS) compared
Can the computer learn a person’s age just from analyzing facial images obtained by a simple webcam? If so, you can automatically determine if a person has the right age to buy beer (shops), to use a credit card (retail), and can enter bars (entertainment). Can the computer automatically recognize
This book examines mechatronics and automatic control systems. The book covers important emerging topics in signal processing, control theory, sensors, mechanic manufacturing systems and automation. The book presents papers from the 2013 International Conference on Mechatronics and Automatic Control Systems held in Hangzhou, China on August 10-11, 2013. .
Ten Holt, G.A.
Automatic sign language recognition is a relatively new field of research (since ca. 1990). Its objectives are to automatically analyze sign language utterances. There are several issues within the research area that merit investigation: how to capture the utterances (cameras, magnetic sensors,
De Ridder, Isabelle; Vangehuchten, Lieve; Gomez, Marta Sesena
In general terms automaticity could be defined as the subconscious condition wherein "we perform a complex series of tasks very quickly and efficiently, without having to think about the various components and subcomponents of action involved" (DeKeyser 2001: 125). For language learning, Segalowitz (2003) characterised automaticity as a…
Tsikrika, T.; Diou, C.; De Vries, A.P.; Delopoulos, A.
Automatic image annotation using supervised learning is performed by concept classifiers trained on labelled example images. This work proposes the use of clickthrough data collected from search logs as a source for the automatic generation of concept training data, thus avoiding the expensive
T. Tsikrika (Theodora); C. Diou; A.P. de Vries (Arjen); A. Delopoulos
htmlabstractAutomatic image annotation using supervised learning is performed by concept classifiers trained on labelled example images. This work proposes the use of clickthrough data collected from search logs as a source for the automatic generation of concept training data, thus avoiding the
APPARATUS FOR THE AUTOMATIC DETERMINATION OF OXYGEN. CONSUMPTION IN FISH l. F. !C. MARAIS, A. F. A. AlCBRS and P. VAN DEI. RYST. Department o/Zoology, U"iversity 0/ Port Elizabeth. ABSTRACT. An apparatus is described which permits the automatic determination of the oxygen consumption of three ...
The human motion contains valuable information in many situations and people frequently perform an unconscious analysis of the motion of other people to understand their actions, intentions, and state of mind. An automatic analysis of human motion will facilitate many applications and thus has...... bring the solution of fully automatic analysis and understanding of human motion closer....
In this paper a Microcontroller Based Automatic Control for Water Pumping. Machine and Level Indicator (MBACWPMLI) has been designed, constructed and tested. The MBACWPML I uses the reflection of sound (echo) to give the indication of water level in a storage tank and also the automatic control of the water pumping ...
Li Yan Ping; Yuan Zhong Ying
The article describes a kind of automatic tracker using solar power. It depends on two important parts which are servo system and adjusting mechanism system to keep the tracker operating normally. The article focuses on describing the characteristics and functions of two systems and the operating details of the automatic solar power tracker.
Spataru, Sergiu; Hacke, Peter; Sera, Dezso
We propose an algorithm for automatic determination of the electroluminescence (EL) signal threshold level corresponding to inactive solar cell cracks, resulting from their disconnection from the electrical circuit of the cell. The method enables automatic quantification of the cell crack size an...
Li Yan Ping
Full Text Available The article describes a kind of automatic tracker using solar power. It depends on two important parts which are servo system and adjusting mechanism system to keep the tracker operating normally. The article focuses on describing the characteristics and functions of two systems and the operating details of the automatic solar power tracker.
A system was developed for automatic generation of problems and solutions for examinations in a university distance course in discrete mathematics and tested in a pilot experiment involving 200 students. Considering the success of such systems in the past, particularly including automatic assessment, it should not take long before such systems are…
Ding, Yi; Liu, Ru-De; Xu, Le; Wang, Jia; Zhang, Dake
The authors' aim was to examine the relations among mental multiplication, working memory load (WML), and automaticity by alternating the difficulty level of task characteristics. In Experiment 1, involving 30 fifth-grade students with mixed abilities, a 2 (WML) × 2 (automaticity) design was utilized. In Experiment 2, involving 21 high-achieving…
Kuilenburg, H. van; Wiering, M.A.; Uyl, M. den
Automatic facial expression recognition is a research topic with interesting applications in the field of human-computer interaction, psychology and product marketing. The classification accuracy for an automatic system which uses static images as input is however largely limited by the image
Kukhtenko, A. I.; Merkulov, V. I.; Samoylenko, Y. I.; Ladikov-Royev, Y. P.
Some problems associated with the automatic control of liquid metal and plasma systems under conditions of weightlessness are examined, with particular reference to the problem of stability of liquid equilibrium configurations. The theoretical fundamentals of automatic control of processes in electrically conducting continuous media are outlined, and means of using electromagnetic fields for simulating technological processes in a space environment are discussed.
Svenonius, Elaine; Molto, Mavis
Describes research that examined the feasibility of automatically deriving name access points from machine readable title pages of English language monographs. An algorithm for automatic derivation is presented and results using the algorithm are compared to traditionally cataloged name access points. The implications for bibliographic standards…
Liu, Tongran; Xiao, Tong; Jiannong, Shi
Adolescence is a critical period for the neurodevelopment of social-emotional processing, wherein the automatic detection of changes in facial expressions is crucial for the development of interpersonal communication. Two groups of participants (an adolescent group and an adult group) were...... automatic processing on fearful faces than happy faces. The present study indicated that adolescent’s posses stronger automatic detection of changes in emotional expression relative to adults, and sheds light on the neurodevelopment of automatic processes concerning social-emotional information....... recruited to complete an emotional oddball task featuring on happy and one fearful condition. The measurement of event-related potential was carried out via electroencephalography and electrooculography recording, to detect visual mismatch negativity (vMMN) with regard to the automatic detection of changes...
Poulsen, Mads; Asmussen, Vibeke; Elbro, Carsten
'Speed and automaticity' of word recognition is a standard collocation. However, it is not clear whether speed and automaticity (i.e., effortlessness) make independent contributions to reading comprehension. In theory, both speed and automaticity may save cognitive resources for comprehension...... processes. Hence, the aim of the present study was to assess the unique contributions of word recognition speed and automaticity to reading comprehension while controlling for decoding speed and accuracy. Method: 139 Grade 5 students completed tests of reading comprehension and computer-based tests of speed...... of decoding and word recognition together with a test of effortlessness (automaticity) of word recognition. Effortlessness was measured in a dual task in which participants were presented with a word enclosed in an unrelated figure. The task was to read the word and decide whether the figure was a triangle...
Mason, Malia F; Morris, Michael W
A fundamental challenge facing social perceivers is identifying the cause underlying other people's behavior. Evidence indicates that East Asian perceivers are more likely than Western perceivers to reference the social context when attributing a cause to a target person's actions. One outstanding question is whether this reflects a culture's influence on automatic or on controlled components of causal attribution. After reviewing behavioral evidence that culture can shape automatic mental processes as well as controlled reasoning, we discuss the evidence in favor of cultural differences in automatic and controlled components of causal attribution more specifically. We contend that insights emerging from social cognitive neuroscience research can inform this debate. After introducing an attribution framework popular among social neuroscientists, we consider findings relevant to the automaticity of attribution, before speculating how one could use a social neuroscience approach to clarify whether culture affects automatic, controlled or both types of attribution processes.
Oh, Sang Hong; Matsuura, Toshihiko; Iwata, Ryusuke; Nakagawa, Michio; Horikawa, Kohsuke; Kim, You Chul
The radiographic testing (RT) has been usually applied to a nondestructive testing, which is carried out on purpose to detect internal defects at welded joints of a penstock. In the case that RT could not be applied to, the ultrasonic testing (UT) was performed. UT was generally carried out by manual scanning and the inspections data were recorded by the inspector in a site. So, as a weak point, there was no objective inspection records correspond to films of RT. It was expected that the automatic ultrasonic testing system by which automatic scanning and automatic recording are possible was developed. In this respect, the automatic ultrasonic testing system was developed. Using newly developed the automatic ultrasonic testing system, test results to the circumferential welded joints of the penstock at a site were shown in this paper.
Main, K M; Jørgensen, J T; Hertel, N T
Non-compliance in children receiving growth hormone (GH) treatment is often caused by pain on injection and difficulties in administration of GH. It has been suggested that automatic needle insertion diminishes pain perception. We quantitatively measured pain intensity on injection with two...... prototype pens for GH administration, providing either manual or automatic sc needle insertion, using a combined visual analogue/facial scale and a five-item scale in 18 children. With the automatic pen there was a significantly lower maximum pain score compared with the manual pen (median 28.5 versus 52.......0 mm) as well as a lower mean pain score (mean 13.7 versus 23.5 mm). The five-item scale revealed that automatic needle insertion was significantly less painful than manual insertion and 13 patients chose to continue treatment with the automatic pen. In conclusion, pain during GH injection can...
Hamilton, Kyra; Orbell, Sheina; Bonham, Mikaela; Kroon, Jeroen; Schwarzer, Ralf
We investigated the role of normative support, behavioural automaticity, and action control in predicting dental flossing behaviour. Between May and October 2015, 629 Australian young adults completed a questionnaire assessing constructs of normative support and automaticity, and a 2-week follow-up of dental flossing behaviour and action control, resulting in n = 241 persons for longitudinal analysis. Findings supported the hypotheses that the effect of normative support on behaviour would be mediated via automaticity, and the effect of automaticity would be moderated by action control. Current results extend previous research to elucidate the mechanisms that help to understand predictors of oral hygiene behaviours and contribute to the cumulative evidence concerning self-regulatory and automatic components of health behaviour.
Ólafsdóttir, Hildur; Darvann, Tron Andre; Hermann, Nuno V.
, automatic detection of the cranial sutures becomes important. We have previously built a craniofacial, wild-type mouse atlas from a set of 10 Micro CT scans using a B-spline-based nonrigid registration method by Rueckert et al. Subsequently, all volumes were registered nonrigidly to the atlas. Using...... these transformations, any annotation on the atlas can automatically be transformed back to all cases. For this study, two rounds of tracing seven of the cranial sutures, were performed on the atlas by one observer. The average of the two rounds was automatically propagated to all the cases. For validation......, the observer traced the sutures on each of the mouse volumes as well. The observer outperforms the automatic approach by approximately 0.1 mm. All mice have similar errors while the suture error plots reveal that suture 1 and 2 are cumbersome, both for the observer and the automatic approach. These sutures can...
A programmable automatic alpha-beta air sample counter was developed for routine sample counting by operational health physics personnel. The system is composed of an automatic sample changer utilizing a large silicon diode detector, an electronic counting system with energy analysis capability, an automatic data acquisition controller, an interface module, and a teletypewriter with paper tape punch and paper tape reader. The system is operated through the teletypewriter keyboard and the paper tape reader, which are used to instruct the automatic data acquisition controller. Paper tape programs are provided for background counting, Chi 2 test, and sample counting. Output data are printed by the teletypewriter on standard continuous roll or multifold paper. Data are automatically corrected for background and counter efficiency
Bushnell, David Henry; Pasareanu, Corina; Mackey, Ryan M.
The TacSat3 project is applying Integrated Systems Health Management (ISHM) technologies to an Air Force spacecraft for operational evaluation in space. The experiment will demonstrate the effectiveness and cost of ISHM and vehicle systems management (VSM) technologies through onboard operation for extended periods. We present two approaches to automatic testcase generation for ISHM: 1) A blackbox approach that views the system as a blackbox, and uses a grammar-based specification of the system's inputs to automatically generate *all* inputs that satisfy the specifications (up to prespecified limits); these inputs are then used to exercise the system. 2) A whitebox approach that performs analysis and testcase generation directly on a representation of the internal behaviour of the system under test. The enabling technologies for both these approaches are model checking and symbolic execution, as implemented in the Ames' Java PathFinder (JPF) tool suite. Model checking is an automated technique for software verification. Unlike simulation and testing which check only some of the system executions and therefore may miss errors, model checking exhaustively explores all possible executions. Symbolic execution evaluates programs with symbolic rather than concrete values and represents variable values as symbolic expressions. We are applying the blackbox approach to generating input scripts for the Spacecraft Command Language (SCL) from Interface and Control Systems. SCL is an embedded interpreter for controlling spacecraft systems. TacSat3 will be using SCL as the controller for its ISHM systems. We translated the SCL grammar into a program that outputs scripts conforming to the grammars. Running JPF on this program generates all legal input scripts up to a prespecified size. Script generation can also be targeted to specific parts of the grammar of interest to the developers. These scripts are then fed to the SCL Executive. ICS's in-house coverage tools will be run to
Fang, Cheng; Chen, P. F.; Tang, Yu-hua; Hao, Qi; Guo, Yang
We developed a series of methods to automatically detect and trace solar filaments in solar Hα images. The programs are able to not only recognize filaments and determine their properties, such as the position, the area and other relevant parameters, but also to trace the daily evolution of the filaments. For solar full disk Hα images, the method consists of three parts: first, preprocessing is applied to correct the original images; second, the Canny edge-detection method is used to detect the filaments; third, filament properties are recognized through the morphological operators. For each Hα filament and its barb features, we introduced the unweighted undirected graph concept and adopted Dijkstra shortest-path algorithm to recognize the filament spine; then, using polarity inversion line shift method for measuring the polarities in both sides of the filament to determine the filament axis chirality; finally, employing connected components labeling method to identify the barbs and calculating the angle between each barb and spine to indicate the barb chirality. Our algorithms are applied to the observations from varied observatories, including the Optical & Near Infrared Solar Eruption Tracer (ONSET) in Nanjing University, Mauna Loa Solar Observatory (MLSO) and Big Bear Solar Observatory (BBSO). The programs are demonstrated to be effective and efficient. We used our method to automatically process and analyze 3470 images obtained by MLSO from January 1998 to December 2009, and a butterfly diagram of filaments is obtained. It shows that the latitudinal migration of solar filaments has three trends in the Solar Cycle 23: The drift velocity was fast from 1998 to the solar maximum; after the solar maximum, it became relatively slow and after 2006, the migration became divergent, signifying the solar minimum. About 60% filaments with the latitudes larger than 50 degree migrate towards the Polar Regions with relatively high velocities, and the latitudinal migrating
Li, Dengwang; Liu, Li; Kapp, Daniel S.; Xing, Lei
To develop automatic and efficient liver contouring software for planning 3D-CT and four-dimensional computed tomography (4D-CT) for application in clinical radiation therapy treatment planning systems. The algorithm comprises three steps for overcoming the challenge of similar intensities between the liver region and its surrounding tissues. First, the total variation model with the L1 norm (TV-L1), which has the characteristic of multi-scale decomposition and an edge-preserving property, is used for removing the surrounding muscles and tissues. Second, an improved level set model that contains both global and local energy functions is utilized to extract liver contour information sequentially. In the global energy function, the local correlation coefficient (LCC) is constructed based on the gray level co-occurrence matrix both of the initial liver region and the background region. The LCC can calculate the correlation of a pixel with the foreground and background regions, respectively. The LCC is combined with intensity distribution models to classify pixels during the evolutionary process of the level set based method. The obtained liver contour is used as the candidate liver region for the following step. In the third step, voxel-based texture characterization is employed for refining the liver region and obtaining the final liver contours. The proposed method was validated based on the planning CT images of a group of 25 patients undergoing radiation therapy treatment planning. These included ten lung cancer patients with normal appearing livers and ten patients with hepatocellular carcinoma or liver metastases. The method was also tested on abdominal 4D-CT images of a group of five patients with hepatocellular carcinoma or liver metastases. The false positive volume percentage, the false negative volume percentage, and the dice similarity coefficient between liver contours obtained by a developed algorithm and a current standard delineated by the expert group
Yabuuchi, Noriaki; Nakazawa, Toshio; Takahashi, Hiroki; Shimazaki, Junya; Hoshi, Tsutao
An automatic operation system has been developed for the purpose of realizing a perfect automatic plant operation after reactor scram events. The goal of the automatic operation after a reactor scram event is to bring the reactor hot stand-by condition automatically. The basic functions of this system are as follows; to monitor actions of the equipments of safety actions after a reactor scram, to control necessary control equipments to bring a reactor to a hot stand-by condition automatically, and to energize a decay heat removal system. The performance evaluation on this system was carried out by comparing the results using to Nuclear Ship Engineering Simulation System (NESSY) and the those measured in the scram test of the nuclear ship 'Mutsu'. As the result, it was showed that this system had the sufficient performance to bring a reactor to a hot syand-by condition quickly and safety. (author)
Mohamad Annuar Assadat Husain; Abdul Aziz Bin Ramli; Mohd Khalid Matori
The design concept applied in the development of an semi-automatic film processing unit needs creativity and user support in channelling the required information to select materials and operation system that suit the design produced. Low cost and efficient operation are the challenges that need to be faced abreast with the fast technology advancement. In producing this processing unit, there are few elements which need to be considered in order to produce high quality image. Consistent movement and correct time coordination for developing and drying are a few elements which need to be controlled. Other elements which need serious attentions are temperature, liquid density and the amount of time for the chemical liquids to react. Subsequent chemical reaction that take place will cause the liquid chemical to age and this will adversely affect the quality of image produced. This unit is also equipped with liquid chemical drainage system and disposal chemical tank. This unit would be useful in GP clinics especially in rural area which practice manual system for developing and require low operational cost. (Author)
Mohammad Reza Falahati Qadimi Fumani
Full Text Available The main objective of this paper was to design a model of automatic keyphrase indexing for Persian. The train model, consisting of six features – “TF”, “TF × IDF”, “RE”, “RE × IDF”, “Node Degree” and “First Occurrence” – were elaborated on. These six features were defined briefly and for each feature, the discretization ranges applied as well as the Yes/No probability scores of being an index term were reported. Finally, the way the model, and each of its components, performed were demonstrated in a step-by-step manner by running the software on a sample full-text article. The ultimate assessment of the software on 75 test articles revealed that it had a very good performance on full-texts (F-measure = 27.3%, Precision = 31.68%, and recall = 25.45% and abstracts (F-measure = 28%, precision = 32.19%, and recall = 26.27% when default was set at 7. The software also proved successful as regards generation of keyphrases rather than single word index terms at default 7. In all, 58.1% of the index terms generated by the software for full-text documents, and 58.67% of those generated for abstracts were phrases. Finally, 78.86% and 74.48% of the keyterms generated for full-texts and abstracts were judged as relevant by an LIS expert.
The Mission Planning and Sequencing (MPS) element of Multi-Mission Ground System and Services (MGSS) provides space missions with multi-purpose software to plan spacecraft activities, sequence spacecraft commands, and then integrate these products and execute them on spacecraft. Jet Propulsion Laboratory (JPL) is currently is flying many missions. The processes for building, integrating, and testing the multi-mission uplink software need to be improved to meet the needs of the missions and the operations teams that command the spacecraft. The Multi-Mission Sequencing Team is responsible for collecting and processing the observations, experiments and engineering activities that are to be performed on a selected spacecraft. The collection of these activities is called a sequence and ultimately a sequence becomes a sequence of spacecraft commands. The operations teams check the sequence to make sure that no constraints are violated. The workflow process involves sending a program start command, which activates the Automatic Sequence Processor (ASP). The ASP is currently a file-based system that is comprised of scripts written in perl, c-shell and awk. Once this start process is complete, the system checks for errors and aborts if there are any; otherwise the system converts the commands to binary, and then sends the resultant information to be radiated to the spacecraft.
Azzopardi, Gabriella; Salvachua Ferrando, Belen Maria; Mereghetti, Alessio; Redaelli, Stefano; CERN. Geneva. ATS Department
The LHC makes use of a collimation system to protect its sensitive equipment by intercepting potentially dangerous beam halo particles. The appropriate collimator settings to protect the machine against beam losses relies on a very precise alignment of all the collimators with respect to the beam. The beam center at each collimator is then found by touching the beam halo using an alignment procedure. Until now, in order to determine whether a collimator is aligned with the beam or not, a user is required to follow the collimator’s BLM loss data and detect spikes. A machine learning (ML) model was trained in order to automatically recognize spikes when a collimator is aligned. The model was loosely integrated with the alignment implementation to determine the classiﬁcation performance and reliability, without eﬀecting the alignment process itself. The model was tested on a number of collimators during this MD and the machine learning was able to output the classiﬁcations in real-time.
Sierra Moral, Rodrigo
Scientists from all over the world need to collaborate with CERN on a daily basis. They must be able to communicate effectively on their joint projects at any time; as a result telephone conferences have become indispensable and widely used. Managed by 6 operators, CERN already has more than 20000 hours and 5700 audio-conferences per year. However, the traditional telephone based audio-conference system needed to be modernized in three ways. Firstly, to provide the participants with more autonomy in the organization of their conferences; secondly, to eliminate the constraints of manual intervention by operators; and thirdly, to integrate the audio-conferences into a collaborative working framework. The large number, and hence cost, of the conferences prohibited externalization and so the CERN telecommunications team drew up a specification to implement a new system. It was decided to use a new commercial collaborative audio-conference solution based on the SIP protocol. The system was tested as the first European pilot and several improvements (such as billing, security, redundancy...) were implemented based on CERN's recommendations. The new automatic conference system has been operational since the second half of 2006. It is very popular for the users and has doubled the number of conferences in the past two years.
Lefebvre, Marc; Zimmerman, Thierry; Baur, Charles; Guegerli, Paul; Pun, Thierry
The Potato Operation is a collaborative, multidisciplinary project in the domain of destructive testing of agricultural products. It aims at automatizing pulp sampling of potatoes in order to detect possible viral diseases. Such viruses can decrease fields productivity by a factor of up to ten. A machine, composed of three conveyor belts, a vision system, a robotic arm and controlled by a PC has been built. Potatoes are brought one by one from a bulk to the vision system, where they are seized by a rotating holding device. The sprouts, where the viral activity is maximum, are then detected by an active vision process operating on multiple views. The 3D coordinates of the sampling point are communicated to the robot arm holding a drill. Some flesh is then sampled by the drill, then deposited into an Elisa plate. After sampling, the robot arm washes the drill in order to prevent any contamination. The PC computer simultaneously controls these processes, the conveying of the potatoes, the vision algorithms and the sampling procedure. The master process, that is the vision procedure, makes use of three methods to achieve the sprouts detection. A profile analysis first locates the sprouts as protuberances. Two frontal analyses, respectively based on fluorescence and local variance, confirm the previous detection and provide the 3D coordinate of the sampling zone. The other two processes work by interruption of the master process.
Abla, G.; Coviello, E.N.; Flanagan, S.M. [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Greenwald, M. [Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Lee, X. [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Romosan, A. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Schissel, D.P., E-mail: firstname.lastname@example.org [General Atomics, P.O. Box 85608, San Diego, CA 92186-5608 (United States); Shoshani, A. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Stillerman, J.; Wright, J. [Massachusetts Institute of Technology, Cambridge, MA 02139 (United States); Wu, K.J. [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States)
Highlights: • Data model, infrastructure, and tools for data tracking, cataloging, and integration. • Automatically document workflow and data provenance in the widest sense. • Fusion Science as test bed but the system’s framework and data model is quite general. - Abstract: Data from large-scale experiments and extreme-scale computing is expensive to produce and may be used for critical applications. However, it is not the mere existence of data that is important, but our ability to make use of it. Experience has shown that when metadata is better organized and more complete, the underlying data becomes more useful. Traditionally, capturing the steps of scientific workflows and metadata was the role of the lab notebook, but the digital era has resulted instead in the fragmentation of data, processing, and annotation. This paper presents the Metadata, Provenance, and Ontology (MPO) System, the software that can automate the documentation of scientific workflows and associated information. Based on recorded metadata, it provides explicit information about the relationships among the elements of workflows in notebook form augmented with directed acyclic graphs. A set of web-based graphical navigation tools and Application Programming Interface (API) have been created for searching and browsing, as well as programmatically accessing the workflows and data. We describe the MPO concepts and its software architecture. We also report the current status of the software as well as the initial deployment experience.
Hoede, Claire; Arnoux, Sandie; Moisset, Mark; Chaumier, Timothée; Inizan, Olivier; Jamilloux, Véronique; Quesneville, Hadi
The classification of transposable elements (TEs) is key step towards deciphering their potential impact on the genome. However, this process is often based on manual sequence inspection by TE experts. With the wealth of genomic sequences now available, this task requires automation, making it accessible to most scientists. We propose a new tool, PASTEC, which classifies TEs by searching for structural features and similarities. This tool outperforms currently available software for TE classification. The main innovation of PASTEC is the search for HMM profiles, which is useful for inferring the classification of unknown TE on the basis of conserved functional domains of the proteins. In addition, PASTEC is the only tool providing an exhaustive spectrum of possible classifications to the order level of the Wicker hierarchical TE classification system. It can also automatically classify other repeated elements, such as SSR (Simple Sequence Repeats), rDNA or potential repeated host genes. Finally, the output of this new tool is designed to facilitate manual curation by providing to biologists with all the evidence accumulated for each TE consensus. PASTEC is available as a REPET module or standalone software (http://urgi.versailles.inra.fr/download/repet/REPET_linux-x64-2.2.tar.gz). It requires a Unix-like system. There are two standalone versions: one of which is parallelized (requiring Sun grid Engine or Torque), and the other of which is not.
Bala, Raja; Zhao, Yonghui; Burry, Aaron; Kozitsky, Vladimir; Fillion, Claude; Saunders, Craig; Rodríguez-Serrano, José
Automatic license plate recognition (ALPR) is an important capability for traffic surveillance applications, including toll monitoring and detection of different types of traffic violations. ALPR is a multi-stage process comprising plate localization, character segmentation, optical character recognition (OCR), and identification of originating jurisdiction (i.e. state or province). Training of an ALPR system for a new jurisdiction typically involves gathering vast amounts of license plate images and associated ground truth data, followed by iterative tuning and optimization of the ALPR algorithms. The substantial time and effort required to train and optimize the ALPR system can result in excessive operational cost and overhead. In this paper we propose a framework to create an artificial set of license plate images for accelerated training and optimization of ALPR algorithms. The framework comprises two steps: the synthesis of license plate images according to the design and layout for a jurisdiction of interest; and the modeling of imaging transformations and distortions typically encountered in the image capture process. Distortion parameters are estimated by measurements of real plate images. The simulation methodology is successfully demonstrated for training of OCR.
Clement, Bradley; Schaffer, Steve
DSN Requirement Scheduler is a computer program that automatically schedules, reschedules, and resolves conflicts for allocations of resources of NASA s Deep Space Network (DSN) on the basis of ever-changing project requirements for DSN services. As used here, resources signifies, primarily, DSN antennas, ancillary equipment, and times during which they are available. Examples of project-required DSN services include arraying, segmentation, very-long-baseline interferometry, and multiple spacecraft per aperture. Requirements can include periodic reservations of specific or optional resources during specific time intervals or within ranges specified in terms of starting times and durations. This program is built on the Automated Scheduling and Planning Environment (ASPEN) software system (aspects of which have been described in previous NASA Tech Briefs articles), with customization to reflect requirements and constraints involved in allocation of DSN resources. Unlike prior DSN-resource- scheduling programs that make single passes through the requirements and require human intervention to resolve conflicts, this program makes repeated passes in a continuing search for all possible allocations, provides a best-effort solution at any time, and presents alternative solutions among which users can choose.
Sebastian Carrasco Pro
Full Text Available Accurate measurement of B and T cell responses is a valuable tool to study autoimmunity, allergies, immunity to pathogens, and host-pathogen interactions and assist in the design and evaluation of T cell vaccines and immunotherapies. In this context, it is desirable to elucidate a method to select validated reference sets of epitopes to allow detection of T and B cells. However, the ever-growing information contained in the Immune Epitope Database (IEDB and the differences in quality and subjects studied between epitope assays make this task complicated. In this study, we develop a novel method to automatically select reference epitope sets according to a categorization system employed by the IEDB. From the sets generated, three epitope sets (EBV, mycobacteria and dengue were experimentally validated by detection of T cell reactivity ex vivo from human donors. Furthermore, a web application that will potentially be implemented in the IEDB was created to allow users the capacity to generate customized epitope sets.
Jonathan A. ENOKELA
Full Text Available The security challenges being encountered in many places require electronic means of controlling access to communities, recreational centres, offices, and homes. The electronically controlled automated security access gate being proposed in this work helps to prevent an unwanted access to controlled environments. This is achieved mainly through the use of a Radio Frequency (RF transmitter-receiver pair. In the design a microcontroller is programmed to decode a given sequence of keys that is entered on a keypad and commands a transmitter module to send out this code as signal at a given radio frequency. Upon reception of this RF signal by the receiver module, another microcontroller activates a driver circuitry to operate the gate automatically. The codes for the microcontrollers were written in C language and were debugged and compiled using the KEIL Micro vision 4 integrated development environment. The resultant Hex files were programmed into the memories of the microcontrollers with the aid of a universal programmer. Software simulation was carried out using the Proteus Virtual System Modeling (VSM version 7.7. A scaled-down prototype of the system was built and tested. The electronically controlled automated security access gate can be useful in providing security for homes, organizations, and automobile terminals. The four-character password required to operate the gate gives the system an increased level of security. Due to its standalone nature of operation the system is cheaper to maintain in comparison with a manually operated type.
Barbedo, Jayme Garcia sArnal; Lopes, Amauri
We present a strategy to perform automatic genre classification of musical signals. The technique divides the signals into 21.3 milliseconds frames, from which 4 features are extracted. The values of each feature are treated over 1-second analysis segments. Some statistical results of the features along each analysis segment are used to determine a vector of summary features that characterizes the respective segment. Next, a classification procedure uses those vectors to differentiate between genres. The classification procedure has two main characteristics: (1) a very wide and deep taxonomy, which allows a very meticulous comparison between different genres, and (2) a wide pairwise comparison of genres, which allows emphasizing the differences between each pair of genres. The procedure points out the genre that best fits the characteristics of each segment. The final classification of the signal is given by the genre that appears more times along all signal segments. The approach has shown very good accuracy even for the lowest layers of the hierarchical structure.
Nappier, Jennifer M.; Briones, Janette C.
The General Dynamics (GD) S-Band software defined radio (SDR) in the Space Communications and Navigation (SCAN) Testbed on the International Space Station (ISS) will provide experimenters an opportunity to develop and demonstrate experimental waveforms in space. The GD SDR platform and initial waveform were characterized on the ground before launch and the data will be compared to the data that will be collected during on-orbit operations. A desired function of the SDR is to estimate the received signal to noise ratio (SNR), which would enable experimenters to better determine on-orbit link conditions. The GD SDR does not have an SNR estimator, but it does have an analog and a digital automatic gain control (AGC). The AGCs can be used to estimate the SDR input power which can be converted into a SNR. Tests were conducted to characterize the AGC response to changes in SDR input power and temperature. This purpose of this paper is to describe the tests that were conducted, discuss the results showi ng how the AGCs relate to the SDR input power, and provide recommendations for AGC testing and characterization.
Wu, Hao [Fermilab; Shangping, Ren [IIT; Garzoglio, Gabriele [Fermilab; Timm, Steven [Fermilab; Bernabeu, Gerard [Fermilab; Kim, Hyun Woo; Chadwick, Keith; Jang, Haengjin [KISTI, Daejeon; Noh, Seo-Young [KISTI, Daejeon
Cloud computing is changing the infrastructure upon which scientific computing depends from supercomputers and distributed computing clusters to a more elastic cloud-based structure. The service-oriented focus and elasticity of clouds can not only facilitate technology needs of emerging business but also shorten response time and reduce operational costs of traditional scientific applications. Fermi National Accelerator Laboratory (Fermilab) is currently in the process of building its own private cloud, FermiCloud, which allows the existing grid infrastructure to use dynamically provisioned resources on FermiCloud to accommodate increased but dynamic computation demand from scientists in the domains of High Energy Physics (HEP) and other research areas. Cloud infrastructure also allows to increase a private cloud’s resource capacity through “bursting” by borrowing or renting resources from other community or commercial clouds when needed. This paper introduces a joint project on building a cloud federation to support HEP applications between Fermi National Accelerator Laboratory and Korea Institution of Science and Technology Information, with technical contributions from the Illinois Institute of Technology. In particular, this paper presents two recent accomplishments of the joint project: (a) cloud bursting automation and (b) load balancer. Automatic cloud bursting allows computer resources to be dynamically reconfigured to meet users’ demands. The load balance algorithm which the cloud bursting depends on decides when and where new resources need to be allocated. Our preliminary prototyping and experiments have shown promising success, yet, they also have opened new challenges to be studied
Ekin, Ahmet; Tekalp, A. Murat
We propose a fully automatic and computationally efficient framework for analysis and summarization of soccer videos using cinematic and object-based features. The proposed framework includes some novel low-level soccer video processing algorithms, such as dominant color region detection, robust shot boundary detection, and shot classification, as well as some higher-level algorithms for goal detection, referee detection, and penalty-box detection. The system can output three types of summaries: i) all slow-motion segments in a game, ii) all goals in a game, and iii) slow-motion segments classified according to object-based features. The first two types of summaries are based on cinematic features only for speedy processing, while the summaries of the last type contain higher-level semantics. The proposed framework is efficient, effective, and robust for soccer video processing. It is efficient in the sense that there is no need to compute object-based features when cinematic features are sufficient for the detection of certain events, e.g. goals in soccer. It is effective in the sense that the framework can also employ object-based features when needed to increase accuracy (at the expense of more computation). The efficiency, effectiveness, and the robustness of the proposed framework are demonstrated over a large data set, consisting of more than 13 hours of soccer video, captured at different countries and conditions.
Stoughton, R.S.; Martin, H.L.; Bentz, R.R.
The problem of automatic camera tracking of mobile objects is addressed with specific reference to remote manipulators and using either fixed or mobile cameras. The technique uses a kinematic approach employing 4 x 4 coordinate transformation matrices to solve for the needed camera PAN and TILT angles. No vision feedback systems are used, as the required input data are obtained entirely from position sensors from the manipulator and the camera-positioning system. All hardware requirements are generally satisfied by currently available remote manipulator systems with a supervisory computer. The system discussed here implements linear plus on/off (bang-bang) closed-loop control with a +-2 0 deadband. The deadband area is desirable to avoid operator seasickness caused by continuous camera movement. Programming considerations for camera control, including operator interface options, are discussed. The example problem presented is based on an actual implementation using a PDP 11/34 computer, a TeleOperator Systems SM-229 manipulator, and an Oak Ridge National Laboratory (ORNL) camera-positioning system. 3 references, 6 figures, 2 tables
The HPD and PEPR automatic measuring systems, which have been described by B. Powell and I. Pless at this conference, were developed in the 1960's to be used for what would now be called open-quotes batch processing.close quotes That is, an entire reel of bubble chamber film containing interesting events whose tracks had been rough-digitized would be processed in an extended run by a dedicated computer/precision digitizer hardware system, with no human intervention. Then, at a later time, events for which the precision measurement did not appear to be successful would be handled with some type of open-quotes fixupclose quotes station or process. By contrast, the POLLY system included from the start, not only a computer and a precision CRT measuring device, but also a human operator who could have convenient two-way interactions with the computer and could also view the picture directly. Inclusion of a human as a key part of the system had some important beneficial effects, as has been described in the original papers. In this note the author summarizes those effects, and also points out connections between the POLLY system philosophy and subsequent developments in both high energy physics data analysis and computing systems
Stoughton, R.S.; Martin, H.L.; Bentz, R.R.
The problem of automatic camera tracking of mobile objects is addressed with specific reference to remote manipulators and using either fixed or mobile cameras. The technique uses a kinematic approach employing 4 x 4 coordinate transformation matrices to solve for the needed camera PAN and TILT angles. No vision feedback systems are used, as the required input data are obtained entirely from position sensors from the manipulator and the camera-positioning system. All hardware requirements are generally satisfied by currently available remote manipulator systems with a supervisory computer. The system discussed here implements linear plus on/off (bang-bang) closed-loop control with a +-2-deg deadband. The deadband area is desirable to avoid operator seasickness caused by continuous camera movement. Programming considerations for camera control, including operator interface options, are discussed. The example problem presented is based on an actual implementation using a PDP 11/34 computer, a TeleOperator Systems SM-229 manipulator, and an Oak Ridge National Laboratory (ORNL) camera-positioning system. 3 references, 6 figures, 2 tables.
Stoughton, R.S.; Martin, H.L.; Bentz, R.R.
The problem of automatic camera tracking of mobile objects is addressed with specific reference to remote manipulators and using either fixed or mobile cameras. The technique uses a kinematic approach employing 4 x 4 coordinate transformation matrices to solve for the needed camera PAN and TILT angles. No vision feedback systems are used, as the required input data are obtained entirely from position sensors from the manipulator and the camera-positioning system. All hardware requirements are generally satisfied by currently available remote manipulator systems with a supervisory computer. The system discussed here implements linear plus on/off (bang-bang) closed-loop control with a +-2/sup 0/ deadband. The deadband area is desirable to avoid operator seasickness caused by continuous camera movement. Programming considerations for camera control, including operator interface options, are discussed. The example problem presented is based on an actual implementation using a PDP 11/34 computer, a TeleOperator Systems SM-229 manipulator, and an Oak Ridge National Laboratory (ORNL) camera-positioning system. 3 references, 6 figures, 2 tables.
The present invention provides a method of rapidly and accurately controlling the temperature of a shipping can, which is used upon shipping inspection for a nuclear fuel assembly. That is, a measured temperature value of the shipping can is converted to a gas pressure setting value in a jacket of the shipping can by conducting a predetermined logic calculation by using a fuzzy logic. A gas pressure control section compares the pressure setting value of a fuzzy estimation section and the measured value of the gas pressure in the jacket of the shipping can, and conducts air supply or exhaustion of the jacket gas so as to adjust the measured value with the setting value. These fuzzy estimation section and gas pressure control section control the gas pressure in the jacket of the shipping can to control the water level in the jacket. As a result, the temperature of the shipping can is controlled. With such procedures, since the water level in the jacket can be controlled directly and finely, temperature of the shipping can is automatically controlled rapidly and accurately compared with a conventional case. (I.S.)
Lee, Hyo-Ki; Kim, Hojoong; Lee, Kyoung-Joung
This study presents a rule-based method for automated, real-time snoring detection using nasal pressure recordings during overnight sleep. Although nasal pressure recordings provide information regarding nocturnal breathing abnormalities in a polysomnography (PSG) study or continuous positive airway pressure (CPAP) system, an objective assessment of snoring detection using these nasal pressure recordings has not yet been reported in the literature. Nasal pressure recordings were obtained from 55 patients with obstructive sleep apnea. The PSG data were also recorded simultaneously to evaluate the proposed method. This rule-based method for automatic, real-time snoring detection employed preprocessing, short-time energy and the central difference method. Using this methodology, a sensitivity of 85.4% and a positive predictive value of 92.0% were achieved in all patients. Therefore, we concluded that the proposed method is a simple, portable and cost-effective tool for real-time snoring detection in PSG and CPAP systems that does not require acoustic analysis using a microphone.
Derczynski, Leon R A
The book offers a detailed guide to temporal ordering, exploring open problems in the field and providing solutions and extensive analysis. It addresses the challenge of automatically ordering events and times in text. Aided by TimeML, it also describes and presents concepts relating to time in easy-to-compute terms. Working out the order that events and times happen has proven difficult for computers, since the language used to discuss time can be vague and complex. Mapping out these concepts for a computational system, which does not have its own inherent idea of time, is, unsurprisingly, tough. Solving this problem enables powerful systems that can plan, reason about events, and construct stories of their own accord, as well as understand the complex narratives that humans express and comprehend so naturally. This book presents a theory and data-driven analysis of temporal ordering, leading to the identification of exactly what is difficult about the task. It then proposes and evaluates machine-learning so...
Full Text Available A cut set is a collection of component failure modes that could lead to a system failure. Cut Set Analysis (CSA is applied to critical systems to identify and rank system vulnerabilities at design time. Model checking tools have been used to automate the generation of minimal cut sets but are generally based on checking reachability of system failure states. This paper describes a new approach to CSA using a Linear Temporal Logic (LTL model checker called BT Analyser that supports the generation of multiple counterexamples. The approach enables a broader class of system failures to be analysed, by generalising from failure state formulae to failure behaviours expressed in LTL. The traditional approach to CSA using model checking requires the model or system failure to be modified, usually by hand, to eliminate already-discovered cut sets, and the model checker to be rerun, at each step. By contrast, the new approach works incrementally and fully automatically, thereby removing the tedious and error-prone manual process and resulting in significantly reduced computation time. This in turn enables larger models to be checked. Two different strategies for using BT Analyser for CSA are presented. There is generally no single best strategy for model checking: their relative efficiency depends on the model and property being analysed. Comparative results are given for the A320 hydraulics case study in the Behavior Tree modelling language.
Abla, G.; Coviello, E.N.; Flanagan, S.M.; Greenwald, M.; Lee, X.; Romosan, A.; Schissel, D.P.; Shoshani, A.; Stillerman, J.; Wright, J.; Wu, K.J.
Highlights: • Data model, infrastructure, and tools for data tracking, cataloging, and integration. • Automatically document workflow and data provenance in the widest sense. • Fusion Science as test bed but the system’s framework and data model is quite general. - Abstract: Data from large-scale experiments and extreme-scale computing is expensive to produce and may be used for critical applications. However, it is not the mere existence of data that is important, but our ability to make use of it. Experience has shown that when metadata is better organized and more complete, the underlying data becomes more useful. Traditionally, capturing the steps of scientific workflows and metadata was the role of the lab notebook, but the digital era has resulted instead in the fragmentation of data, processing, and annotation. This paper presents the Metadata, Provenance, and Ontology (MPO) System, the software that can automate the documentation of scientific workflows and associated information. Based on recorded metadata, it provides explicit information about the relationships among the elements of workflows in notebook form augmented with directed acyclic graphs. A set of web-based graphical navigation tools and Application Programming Interface (API) have been created for searching and browsing, as well as programmatically accessing the workflows and data. We describe the MPO concepts and its software architecture. We also report the current status of the software as well as the initial deployment experience.
M. A. Fernandez-Granero
Full Text Available Glaucoma is a degenerative disease that constitutes the second cause of blindness in developed countries. Although it cannot be cured, its progression can be prevented through early diagnosis. In this paper, we propose a new algorithm for automatic glaucoma diagnosis based on retinal colour images. We focus on capturing the inherent colour changes of optic disc (OD and cup borders by computing several colour derivatives in CIE L∗a∗b∗ colour space with CIE94 colour distance. In addition, we consider spatial information retaining these colour derivatives and the original CIE L∗a∗b∗ values of the pixel and adding other characteristics such as its distance to the OD centre. The proposed strategy is robust due to a simple structure that does not need neither initial segmentation nor removal of the vascular tree or detection of vessel bends. The method has been extensively validated with two datasets (one public and one private, each one comprising 60 images of high variability of appearances. Achieved class-wise-averaged accuracy of 95.02% and 81.19% demonstrates that this automated approach could support physicians in the diagnosis of glaucoma in its early stage, and therefore, it could be seen as an opportunity for developing low-cost solutions for mass screening programs.
Sierra Moral, Rodrigo
Scientists from all over the world need to collaborate with CERN on a daily basis. They must be able to communicate effectively on their joint projects at any time; as a result telephone conferences have become indispensable and widely used. Managed by 6 operators, CERN already has more than 20000 hours and 5700 audio-conferences per year. However, the traditional telephone based audio-conference system needed to be modernized in three ways. Firstly, to provide the participants with more autonomy in the organization of their conferences; secondly, to eliminate the constraints of manual intervention by operators; and thirdly, to integrate the audio-conferences into a collaborative working framework. The large number, and hence cost, of the conferences prohibited externalization and so the CERN telecommunications team drew up a specification to implement a new system. It was decided to use a new commercial collaborative audio-conference solution based on the SIP protocol. The system was tested as the first European pilot and several improvements (such as billing, security, redundancy...) were implemented based on CERN's recommendations. The new automatic conference system has been operational since the second half of 2006. It is very popular for the users and has doubled the number of conferences in the past two years.
Full Text Available This paper presents a method for automatic music transcription applied to audio recordings of a cappella performances with multiple singers. We propose a system for multi-pitch detection and voice assignment that integrates an acoustic and a music language model. The acoustic model performs spectrogram decomposition, extending probabilistic latent component analysis (PLCA using a six-dimensional dictionary with pre-extracted log-spectral templates. The music language model performs voice separation and assignment using hidden Markov models that apply musicological assumptions. By integrating the two models, the system is able to detect multiple concurrent pitches in polyphonic vocal music and assign each detected pitch to a specific voice type such as soprano, alto, tenor or bass (SATB. We compare our system against multiple baselines, achieving state-of-the-art results for both multi-pitch detection and voice assignment on a dataset of Bach chorales and another of barbershop quartets. We also present an additional evaluation of our system using varied pitch tolerance levels to investigate its performance at 20-cent pitch resolution.
Watcharapinchai, Nattachai; Aramvith, Supavadee; Siddhichai, Supakorn
An improvement in the method of automatic vehicle classification is investigated. The challenges are to correctly classify vehicles regardless of changes in illumination, differences in points of view of the camera, and variations in the types of vehicles. Our proposed appearance-based feature extraction algorithm is called linked visual words (LVWs) and is based on the existing technique bag-of-visual word (BoVW) with the addition of spatial information to improve accuracy of classification. In addition, to prevent over-fitting due to a large number of LVWs, four common sampling techniques with LVWs are investigated. Our results suggest that the sampling of LVWs using TF-IDF with grouping improved the accuracy of classification for the test dataset. In summary, the proposed system is able to classify nine types of vehicles and work with surveillance cameras in real-world scenarios. The classification accuracy of the proposed system is 5.58% and 4.27% higher on average for three datasets when compared with BoVW + SVM and Lenet-5, respectively.
Full Text Available SUMMARY: The classification of transposable elements (TEs is key step towards deciphering their potential impact on the genome. However, this process is often based on manual sequence inspection by TE experts. With the wealth of genomic sequences now available, this task requires automation, making it accessible to most scientists. We propose a new tool, PASTEC, which classifies TEs by searching for structural features and similarities. This tool outperforms currently available software for TE classification. The main innovation of PASTEC is the search for HMM profiles, which is useful for inferring the classification of unknown TE on the basis of conserved functional domains of the proteins. In addition, PASTEC is the only tool providing an exhaustive spectrum of possible classifications to the order level of the Wicker hierarchical TE classification system. It can also automatically classify other repeated elements, such as SSR (Simple Sequence Repeats, rDNA or potential repeated host genes. Finally, the output of this new tool is designed to facilitate manual curation by providing to biologists with all the evidence accumulated for each TE consensus. AVAILABILITY: PASTEC is available as a REPET module or standalone software (http://urgi.versailles.inra.fr/download/repet/REPET_linux-x64-2.2.tar.gz. It requires a Unix-like system. There are two standalone versions: one of which is parallelized (requiring Sun grid Engine or Torque, and the other of which is not.
Full Text Available This paper presents the design and implementation of an automatic battery swap system for the prolonged activities of home robots. A battery swap station is proposed to implement battery off-line recharging and on-line exchanging functions. It consists of a loading and unloading mechanism, a shifting mechanism, a locking device and a shell. The home robot is a palm-sized wheeled robot with an onboard camera and a removable battery case in the front. It communicates with the battery swap station wirelessly through ZigBee. The influences of battery case deflection and robot docking deflection on the battery swap operations have been investigated. The experimental results show that it takes an average time of 84.2s to complete the battery swap operations. The home robot does not have to wait several hours for the batteries to be fully charged. The proposed battery swap system is proved to be efficient in home robot applications that need the robots to work continuously over a long period.
Dallman, David Peter
Bibliographic databases were developed from the traditional library card catalogue in order to enable users to access library documents via various types of bibliographic information, such as title, author, series or conference date. In addition these catalogues sometimes contained some form of indexation by subject, such as the Universal (or Dewey) Decimal Classification used for books. With the introduction of the eprint archives, set up by the High Energy Physics (HEP) Community in the early 90s, huge collections of documents in several fields have been made available on the World Wide Web. These developments however have not yet been followed up from a keywording point of view. We will see in this paper how important it is to attribute keywords to all documents in the area of HEP Grey Literature. As libraries are facing a future with less and less manpower available and more and more documents, we will explore the possibility of being helped by automatic classification software. We will specifically menti...
Jackson, Philip J. B.; Jesus, Luis M. T.; Shadle, Christine H.; Pincas, Jonathan
As an approach to understanding the characteristics of the acoustic sources in voiced fricatives, it seems apt to draw on knowledge of vowels and voiceless fricatives, which have been relatively well studied. However, the presence of both phonation and frication in these mixed-source sounds offers the possibility of mutual interaction effects, with variations across place of articulation. This paper examines the acoustic and articulatory consequences of these interactions and explores automatic techniques for finding parametric and statistical descriptions of these phenomena. A reliable and consistent set of such acoustic cues could be used for phonetic classification or speech recognition. Following work on devoicing of European Portuguese voiced fricatives [Jesus and Shadle, in Mamede et al. (eds.) (Springer-Verlag, Berlin, 2003), pp. 1-8]. and the modulating effect of voicing on frication [Jackson and Shadle, J. Acoust. Soc. Am. 108, 1421-1434 (2000)], the present study focuses on three types of information: (i) sequences and durations of acoustic events in VC transitions, (ii) temporal, spectral and modulation measures from the periodic and aperiodic components of the acoustic signal, and (iii) voicing activity derived from simultaneous EGG data. Analysis of interactions observed in British/American English and European Portuguese speech corpora will be compared, and the principal findings discussed.
von Oppen, M.
The construction, installation and operation of a simple, low-cost automatic tracking mechanism for the sun basket, an efficient low-cost solar cooker are described. Tracking is controlled by means of a water-clock type timing device with the sun basket being driven by a weight floating on the water level. The tracking device consists of a 10-cm diameter asbestos-cement pipe about 1.8 m long with one end closed except for an adjustable outlet, a corked one-liter bottle filled with water, a simple pulley, strings and supporting poles. The sun basket must be fitted with an axle and appropriate pole supports. It is estimated that a locally-made 1.4-m diameter sun basket with timing device can be delivered and assembled for a maximum total cost of 100 Indian Rupees. Such a sun basket can deliver 0.7 kW to a cooking pot on a clear sunny day. 2 references.
Full Text Available Ultrasound tomography (UST image segmentation is fundamental in breast density estimation, medicine response analysis, and anatomical change quantification. Existing methods are time consuming and require massive manual interaction. To address these issues, an automatic algorithm based on GrabCut (AUGC is proposed in this paper. The presented method designs automated GrabCut initialization for incomplete labeling and is sped up with multicore parallel programming. To verify performance, AUGC is applied to segment thirty-two in vivo UST volumetric images. The performance of AUGC is validated with breast overlapping metrics (Dice coefficient (D, Jaccard (J, and False positive (FP and time cost (TC. Furthermore, AUGC is compared to other methods, including Confidence Connected Region Growing (CCRG, watershed, and Active Contour based Curve Delineation (ACCD. Experimental results indicate that AUGC achieves the highest accuracy (D=0.9275 and J=0.8660 and FP=0.0077 and takes on average about 4 seconds to process a volumetric image. It was said that AUGC benefits large-scale studies by using UST images for breast cancer screening and pathological quantification.
Sundriyal, Vaibhav [Iowa State Univ., Ames, IA (United States)
Although high-performance computing traditionally focuses on the efficient execution of large-scale applications, both energy and power have become critical concerns when approaching exascale. Drastic increases in the power consumption of supercomputers affect significantly their operating costs and failure rates. In modern microprocessor architectures, equipped with dynamic voltage and frequency scaling (DVFS) and CPU clock modulation (throttling), the power consumption may be controlled in software. Additionally, network interconnect, such as Infiniband, may be exploited to maximize energy savings while the application performance loss and frequency switching overheads must be carefully balanced. This work first studies two important collective communication operations, all-to-all and allgather and proposes energy saving strategies on the per-call basis. Next, it targets point-to-point communications to group them into phases and apply frequency scaling to them to save energy by exploiting the architectural and communication stalls. Finally, it proposes an automatic runtime system which combines both collective and point-to-point communications into phases, and applies throttling to them apart from DVFS to maximize energy savings. The experimental results are presented for NAS parallel benchmark problems as well as for the realistic parallel electronic structure calculations performed by the widely used quantum chemistry package GAMESS. Close to the maximum energy savings were obtained with a substantially low performance loss on the given platform.
Lam, Silvia Siu-Yin; White-Schwoch, Travis; Zecker, Steven G; Hornickel, Jane; Kraus, Nina
Automaticity, the ability to perform a task rapidly with minimal effort, plays a key role in reading fluency and is indexed by rapid automatized naming (RAN) and processing speed. Yet little is known about automaticity's neurophysiologic underpinnings. The more efficiently sound is encoded, the more automatic sound processing can be. In turn, this automaticity could free up cognitive resources such as attention and working memory to help build an integrative reading network. Therefore, we hypothesized that automaticity and reading fluency correlate with stable neural representation of sounds, given a larger body of literature suggesting the close relationship between neural stability and the integrative function in the central auditory system. To test this hypothesis, we recorded the frequency-following responses (FFR) to speech syllables and administered cognitive and reading measures to school-aged children. We show that the stability of neural responses to speech correlates with RAN and processing speed, but not phonological awareness. Moreover, the link between neural stability and RAN mediates the previously-determined link between neural stability and reading ability. Children with a RAN deficit have especially unstable neural responses. Our neurophysiological approach illuminates a potential neural mechanism specific to RAN, which in turn indicates a relationship between synchronous neural firing in the auditory system and automaticity critical for reading fluency. Copyright © 2017 Elsevier Ltd. All rights reserved.
Heinecke, W.; Fischer, B.E.
An automatic scanner for nuclear emulsion plates has been improved by adding particle discrimination. By determination of the mean luminosity of tracks in darkfield illumination in addition to the track length a clear discrimination has been obtained, at least for lighter particles. The scanning speed of the original automatic scanner has not been reduced. The scanner works up to 200 times faster than a human scanner. Besides the particle discrimination the determination of the mean track luminosity led to a lower perturbation sensitivity with respect to a high background of accidentally developed silvergrains, scratches in emulsion etc. The reproducibility of the results obtained by the automatic scanner is better than 5%. (Auth.)
Kreimeyer, Roman; Ludwig, Stefan
We present an automatic acoustic classifier for marine mammals based on human speaker classification methods as an element of a passive acoustic monitoring (PAM) tool. This work is part of the Protection of Marine Mammals (PoMM) project under the framework of the European Defense Agency (EDA) and joined by the Research Department for Underwater Acoustics and Geophysics (FWG), Bundeswehr Technical Centre (WTD 71) and Kiel University. The automatic classification should support sonar operators in the risk mitigation process before and during sonar exercises with a reliable automatic classification result.
Full Text Available Automatic profiling machine is a movement system that has a high degree of parameter variation and high frequency of transient process, and it requires an accurate control in time. In this paper, the discrete model reference adaptive control system of automatic profiling machine is discussed. Firstly, the model of automatic profiling machine is presented according to the parameters of DC motor. Then the design of the discrete model reference adaptive control is proposed, and the control rules are proven. The results of simulation show that adaptive control system has favorable dynamic performances.
Full Text Available The automatic dynamic balancer is a device to reduce the vibration from unbalanced mass of rotors. Instead of considering prevailing ball automatic dynamic balancer, pendulum automatic dynamic balancer is analyzed. For the analysis of dynamic stability and behavior, the nonlinear equations of motion for a system are derived with respect to polar coordinates by the Lagrange's equations. The perturbation method is applied to investigate the dynamic behavior of the system around the equilibrium position. Based on the linearized equations, the dynamic stability of the system around the equilibrium positions is investigated by the eigenvalue analysis.
Full Text Available Ventricular capture management is an automatic pacing threshold adjustment algorithm that automatically measures pacing threshold through detection of the evoked response after a pacing stimulus. Although it is principally designed to save device battery under the maintenance of the patient×³s safety, we experienced a rare case with serious pacing failure due to a weakness of this algorithm. This pacing failure might be explained by a large variation in the ventricular pacing threshold depending on the atrioventricular interval and daily variation of pacing threshold and concomitant steroid use in this patient. Keywords: Automatic pacing threshold adjustment algorithm, Pacing failure
Salisbury, Laura; Code, Chris
This article explores the relationship between automatic and involuntary language in the work of Samuel Beckett and late nineteenth-century neurological conceptions of language that emerged from aphasiology. Using the work of John Hughlings Jackson alongside contemporary neuroscientific research, we explore the significance of the lexical and affective symmetries between Beckett's compulsive and profoundly embodied language and aphasic speech automatisms. The interdisciplinary work in this article explores the paradox of how and why Beckett was able to search out a longed-for language of feeling that might disarticulate the classical bond between the language, intention, rationality and the human, in forms of expression that seem automatic and "readymade".
Chadalawada, Jayashree; Babovic, Vladan
One of the recent challenges for the hydrologic research community is the need for the development of coupled systems that involves the integration of hydrologic, atmospheric and socio-economic relationships. This poses a requirement for novel modelling frameworks that can accurately represent complex systems, given, the limited understanding of underlying processes, increasing volume of data and high levels of uncertainity. Each of the existing hydrological models vary in terms of conceptualization and process representation and is the best suited to capture the environmental dynamics of a particular hydrological system. Data driven approaches can be used in the integration of alternative process hypotheses in order to achieve a unified theory at catchment scale. The key steps in the implementation of integrated modelling framework that is influenced by prior understanding and data, include, choice of the technique for the induction of knowledge from data, identification of alternative structural hypotheses, definition of rules, constraints for meaningful, intelligent combination of model component hypotheses and definition of evaluation metrics. This study aims at defining a Genetic Programming based modelling framework that test different conceptual model constructs based on wide range of objective functions and evolves accurate and parsimonious models that capture dominant hydrological processes at catchment scale. In this paper, GP initializes the evolutionary process using the modelling decisions inspired from the Superflex framework [Fenicia et al., 2011] and automatically combines them into model structures that are scrutinized against observed data using statistical, hydrological and flow duration curve based performance metrics. The collaboration between data driven and physical, conceptual modelling paradigms improves the ability to model and manage hydrologic systems. Fenicia, F., D. Kavetski, and H. H. Savenije (2011), Elements of a flexible approach
Benson, J.; Bipes, T.; Udpa, L.
Utilities perform eddy current tests on nuclear power plant steam generator (SG) tubes to detect degradation. This paper summarizes the Electric Power Research Institute (EPRI) research to develop signal-processing algorithms that automate the analysis of eddy current test data. The research focuses on analyzing rotating probe and array probe data for detecting, classifying, and characterizing degradation in SG tubes. Automated eddy current data analysis systems for bobbin coil probe data have been available for more than a decade. However, automated data analysis systems for rotating and array probes have developed slowly because of the complexities of the inspection parameters associated with the data. Manual analysis of rotating probe data has been shown to be inconsistent and time consuming when flaw depth profiles are generated. Algorithms have been developed for detection of most all common steam generator degradation mechanisms. Included in the latest version of the developed software is the ability to perform automated defect profiling which is useful in tube integrity determinations. Profiling performed manually can be time consuming whereas automated profiling is performed in a fraction of the time and is much more repeatable. Recent advances in eddy current probe development have resulted in an array probe design capable of high-speed data acquisition over the full length of SG tubes. Probe qualification programs have demonstrated that array probes are capable of providing similar degradation detection capabilities to the rotating probe technology. However, to date, utilities have not used the array probe in the field on a large-scale basis due to the large amount of data analyst resources and time required to process the vast quantity of data generated by the probe. To address this obstacle, EPRI initiated a program to develop automatic data analysis algorithms for rotating and array probes. During the development process for both rotating and array
Dailor, David S.
Application Specific Integrated Circuit (ASIC) manufacturing, characterized by fast cycle time, small lot sizes and an abundance of products and process flows, creates challenges not found in a dedicated product line. The continuous addition of new devices into the wafer fab creates problems such as reticle storage, critical dimensions specifications and stepper set-up. One of the stepper set-up problems is stepper job file generation. Each device run on a stepper requires several job files to be created. The number of job files created for each device is dependent on the manufacturing environment, the alignment scheme, process flow and stepper used. There can be as many job files as there are layers for each device. Data from the reticle layout engineer is entered into the stepper by the process engineer to define the stepping array, location of alignment marks, framing blade settings and other exposure related information. This process is time consuming and removes a machine from production while job files are being written and tested. In an ASIC environment where several new devices start each week, creating stepper job files is a major problem impacting: productivity, cycle time, process yield and the rework rate. A solution to all of these problems: automate the stepper job file generation process. Our stepper job files are created automatically by computer when the reticles are tooled. Stepper job files are ready before the masks arrive and they are always correct. The result is improved productivity and process yields with reduced reworks and prototype cycle times. A description of this automated approach and the necessary items to implement this technique is presented.
Calderone, G.; Nicastro, L.; Ghisellini, G.; Dotti, M.; Sbarrato, T.; Shankar, F.; Colpi, M.
We present QSFIT (Quasar Spectral Fitting package), a new software package to automatically perform the analysis of active galactic nuclei (AGNs) optical spectra. The software provides luminosity estimates for the AGN continuum, the Balmer continuum, both optical and ultraviolet iron blended complex, host galaxy and emission lines, as well as width, velocity offset and equivalent width of 20 emission lines. Improving on a number of previous studies on AGN spectral analysis, QSFIT fits all the components simultaneously, using an AGN continuum model which extends over the entire available spectrum, and is thus a probe of the actual AGN continuum whose estimates are scarcely influenced by localized features (e.g. emission lines) in the spectrum. We used QSFIT to analyse 71 251 optical spectra of Type 1 AGN at z < 2 (obtained by the Sloan Digital Sky Survey, SDSS) and to produce a publicly available catalogue of AGN spectral properties. Such catalogue allowed us (for the first time) to estimate the AGN continuum slope and the Balmer continuum luminosity on a very large sample, and to show that there is no evident correlation between these quantities the redshift. All data in the catalogue, the plots with best-fitting model and residuals, and the IDL code we used to perform the analysis, are available on a dedicated website. The whole fitting process is customizable for specific needs, and can be extended to analyse spectra from other data sources. The ultimate purpose of QSFIT is to allow astronomers to run standardized recipes to analyse the AGN data, in a simple, replicable and shareable way.
Bergen, K.; Beroza, G. C.
In recent years, advances in machine learning have transformed fields such as image recognition, natural language processing and recommender systems. Many of these performance gains have relied on the availability of large, labeled data sets to train high-accuracy models; labeled data sets are those for which each sample includes a target class label, such as waveforms tagged as either earthquakes or noise. Earthquake seismologists are increasingly leveraging machine learning and data mining techniques to detect and analyze weak earthquake signals in large seismic data sets. One of the challenges in applying machine learning to seismic data sets is the limited labeled data problem; learning algorithms need to be given examples of earthquake waveforms, but the number of known events, taken from earthquake catalogs, may be insufficient to build an accurate detector. Furthermore, earthquake catalogs are known to be incomplete, resulting in training data that may be biased towards larger events and contain inaccurate labels. This challenge is compounded by the class imbalance problem; the events of interest, earthquakes, are infrequent relative to noise in continuous data sets, and many learning algorithms perform poorly on rare classes. In this work, we investigate the use of active learning for automatic earthquake detection. Active learning is a type of semi-supervised machine learning that uses a human-in-the-loop approach to strategically supplement a small initial training set. The learning algorithm incorporates domain expertise through interaction between a human expert and the algorithm, with the algorithm actively posing queries to the user to improve detection performance. We demonstrate the potential of active machine learning to improve earthquake detection performance with limited available training data.
Suhail, Zobia; Sarwar, Mansoor; Murtaza, Kashif
In recent years, an increased interest has been seen in the area of medical image processing and, as a consequence, Computer Aided Diagnostic (CAD) systems. The basic purpose of CAD systems is to assist doctors in the process of diagnosis. CAD systems, however, are quite expensive, especially, in most of the developing countries. Our focus is on developing a low-cost CAD system. Today, most of the CAD systems regarding mammogram classification target automatic detection of calcification and abnormal mass. Calcification normally indicates an early symptom of breast cancer if it appears as a small size bright spot in a mammogram image. Based on the observation that calcification appears as small bright spots on a mammogram image, we propose a new scale-specific blob detection technique in which the scale is selected through supervised learning. By computing energy for each pixel at two different scales, a new feature “Ratio Energy” is introduced for efficient blob detection. Due to the imposed simplicity of the feature and post processing, the running time of our algorithm is linear with respect to image size. Two major types of calcification, microcalcification and macrocalcification have been identified and highlighted by drawing a circular boundary outside the area that contains calcification. Results are quite visible and satisfactory, and the radiologists can easily view results through the final detected boundary. CAD systems are designed to help radiologists in verifying their diagnostics. A new way of identifying calcification is proposed based on the property that microcalcification is small in size and appears in clusters. Results are quite visible and encouraging, and can assist radiologists in early detection of breast cancer
E. V. Bulgakova
Full Text Available Subject of Research. The paper presents a semi-automatic speaker verification system based on comparing of formant values, statistics of phone lengths and melodic characteristics as well. Due to the development of speech technology, there is an increased interest now in searching for expert speaker verification systems, which have high reliability and low labour intensiveness because of the automation of data processing for the expert analysis. System Description. We present a description of a novel system analyzing similarity or distinction of speaker voices based on comparing statistics of phone lengths, formant features and melodic characteristics. The characteristic feature of the proposed system based on fusion of methods is a weak correlation between the analyzed features that leads to a decrease in the error rate of speaker recognition. The system advantage is the possibility to carry out rapid analysis of recordings since the processes of data preprocessing and making decision are automated. We describe the functioning methods as well as fusion of methods to combine their decisions. Main Results. We have tested the system on the speech database of 1190 target trials and 10450 non-target trials, including the Russian speech of the male and female speakers. The recognition accuracy of the system is 98.59% on the database containing records of the male speech, and 96.17% on the database containing records of the female speech. It was also experimentally established that the formant method is the most reliable of all used methods. Practical Significance. Experimental results have shown that proposed system is applicable for the speaker recognition task in the course of phonoscopic examination.
Valente, Luca; Funka-Lea, Gareth; Stoll, Jeffrey
We present a novel and efficient approach for evaluating the quality of ultrasound images. Image acquisition is sensitive to skin contact and transducer orientation and requires both time and technical skill to be done properly. Images commonly suffer degradation due to acoustic shadows and signal attenuation, which present as regions of low signal intensity masking anatomical details and making the images partly or totally unusable. As ultrasound image acquisition and analysis becomes increasingly automated, it is beneficial to also automate the estimation of image quality. Towards this end, we present an algorithm that classifies regions of an image as usable or un-usable. Example applications of this algorithm include improved compounding of free-hand 3D ultrasound volumes by eliminating unusable data and improved automatic feature detection by limiting detection to only usable areas. The algorithm operates in two steps. First, it classifies the image into bright areas, likely to have image content, and dark areas, likely to have no content. Second, it classifies the dark areas into unusable (i.e. due to shadowing and/or signal loss) and usable (i.e. anatomically accurate dark regions, such as with a blood vessel) sub-areas. The classification considers several factors, including statistical information, gradient intensity and geometric properties such as shape and relative position. Relative weighting of factors was obtained through the training of a Support Vector Machine. Classification results for both human and phantom images are presented and compared to manual classifications. This method achieves 91% sensitivity and 91% specificity for usable regions of human scans.
Fejoz , Loïc; Merz , Stephan
International audience; The verification of lock-free data structures has traditionally been considered as difficult. We propose a formal model for describing such algorithms. The verification conditions generated from this model can often be handled by automatic theorem provers.
Ogawa, M.; Adachi, M.; Arai, E.
An apparatus has been constructed to perform the sequence control of a beam-analysing magnet for automatic excitation function measurements. This device is also applied to the feedback control of the magnet to lock the beam energy. (Auth.)
A. I. Logvin
Full Text Available The article discusses algorithm for automatic runway detection on video sequences. The main stages of algorithm are represented. Some methods to increase reliability of recognition are described.
Full Text Available Web applications are becoming an essential part of our everyday lives. Many of our activities are dependent on the functionality and security of these applications. As the scale of these applications grows, injection vulnerabilities such as SQL injection are major security challenges for developers today. This paper presents the technique of automatic query sanitization to automatically remove SQL injection vulnerabilities in code. In our technique, a combination of static analysis and program transformation are used to automatically instrument web applications with sanitization code. We have implemented this technique in a tool named ASSIST (Automatic and Static SQL Injection Sanitization Tool for protecting Java-based web applications. Our experimental evaluation showed that our technique is effective against SQL injection vulnerabilities and has a low overhead.
Roadway Weather Information System and Automatic Vehicle Location Coordination involves the : development of an Inclement Weather Console that provides a new capability for the state of Oklahoma : to monitor weather-related roadway conditions. The go...
Jones, Christopher R; Fazio, Russell H
Prior stereotyping research provides conflicting evidence regarding the importance of person categorization along a particular dimension for the automatic activation of a stereotype corresponding to that dimension. Experiment 1 replicated a racial stereotyping effect on object identification and examined whether it could be attenuated by encouraging categorization by age. Experiment 2 employed socially complex person stimuli and manipulated whether participants categorized spontaneously or by race. In Experiment 3, the distinctiveness of the racial dimension was manipulated by having Black females appear in the context of either Black males or White females. The results indicated that conditions fostering categorization by race consistently produced automatic racial stereotyping and that conditions fostering nonracial categorization can eliminate automatic racial stereotyping. Implications for the relation between automatic stereotype activation and dimension of categorization are discussed.
Soe, Naing Ko; Lee, Sang Kun
The distinct brain regions could be specifically involved in different languages and the differences in brain activation depending on the language proficiency and on the age of language acquisition. Speech disturbances are observed in the majority of temporal lobe complex motor seizures. Ictal verbalization had significant lateralization value: 90% of patients with this manifestation had seizure focus in the non-dominant temporal lobe. Although, ictal speech automatisms are usually uttered in the patient's native language, ictal speech foreign language automatisms are unusual presentations of non-dominent temporal lobe epilepsy. The release of isolated foreign language area could be possible depending on the pattern of ictal spreading of non-dominant hemisphere. Most of the case reports in ictal speech foreign language automatisms were men. In this case report, we observed ictal foreign language automatisms in middle age Korean woman.
Butler, J.W.; Hodges, D.; Royston, R.
The system for automatic data handling uses commercially available or state-of-the-art components. The system is flexible enough to accept information from various types of experiments involving photographic data acquisition
Several iterative algorithms based on multigrid methods are introduced for solving linear Fredholm integral equations of the second kind. Automatic programs based on these algorithms are introduced using Simpson's rule and the piecewise Gaussian rule for numerical integration.
Jínová, P.; Lehečka, Boris; Oliva jr., Karel
-, č. 13 (2014), s. 7-17 ISSN 1579-8372 Institutional support: RVO:68378092 Keywords : Old Czech morphology * declension patterns * automatic text analysis * i-stems * ja-stems Subject RIV: AI - Linguistics
Based on sliding mode variable structure control theory, the path tracking problem of automatic guided vehicle is studied, proposed a controller design method based on the terminal sliding mode. First of all, through analyzing the characteristics of the automatic guided vehicle movement, the kinematics model is presented. Then to improve the traditional expression of terminal sliding mode, design a nonlinear sliding mode which the convergence speed is faster than the former, verified by theoretical analysis, the design of sliding mode is steady and fast convergence in the limited time. Finally combining Lyapunov method to design the tracking control law of automatic guided vehicle, the controller can make the automatic guided vehicle track the desired trajectory in the global sense as well as in finite time. The simulation results verify the correctness and effectiveness of the control law.
A performance specification is provided in this report for an Optical Automatic Car Identification (OACI) scanner system which features 6% improved readability over existing industry scanner systems. It also includes the analysis and rationale which ...
Schultz, Ulrik Pagh
, inheritance is used to control the automatic application of program specialization to class members during compilation to obtain an efficient implementation. This paper presents the language JUST, which integrates object-oriented concepts, block structure, and techniques from automatic program specialization......The object-oriented style of programming facilitates program adaptation and enhances program genericness, but at the expense of efficiency. Automatic program specialization can be used to generate specialized, efficient implementations for specific scenarios, but requires the program...... to be structured appropriately for specialization and is yet another new concept for the programmer to understand and apply. We have unified automatic program specialization and inheritance into a single concept, and implemented this approach in a modified version of Java named JUST. When programming in JUST...
... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Automatic Dependent Surveillance Broadcast (ADS-B) AGENCY: Department of.... FOR FURTHER INFORMATION CONTACT: Doug Arbuckle, Chief Scientist, Surveillance & Broadcast Services Pgm...
Jakobsen, Erik; Kruse-Andersen, S; Kolberg, Jens Godsk
comparable. However, the neural network recognized pressure peaks clearly generated by muscular activity that had escaped detection by the conventional program. In conclusion, we believe that neurocomputing has potential advantages for automatic analysis of gastrointestinal motility data....
At CERN, neutron personal monitoring for over 4000 collaborators is performed with Kodak NTA films, which have been shown to be the most suitable neutron dosimeter in the radiation environment around high-energy accelerators. To overcome the lengthy and strenuous manual scanning process with an optical microscope, an automatic analysis system has been developed. We report on the successful automatic scanning of NTA films irradiated with sup 2 sup 3 sup 8 Pu-Be source neutrons, which results in densely ionised recoil tracks, as well as on the extension of the method to higher energy neutrons causing sparse and fragmentary tracks. The application of the method in routine personal monitoring is discussed. $9 overcome the lengthy and strenuous manual scanning process with an optical microscope, an automatic analysis system has been developed. We report on the successful automatic scanning of NTA films irradiated with /sup 238/Pu-Be source $9 discussed. (10 refs).
Zheng, Xiaomei; Li, Dongyang; Wang, Lei; Shen, Lin; Gao, Yanyuan; Zhu, Yuanyuan
The automatic composition has achieved rich results in recent decades, including Western and some other areas of music. However, the automatic composition of Chinese music is less involved. After thousands of years of development, Chinese folk music has a wealth of resources. To design an automatic composition mode, learn the characters of Chinese folk melody and imitate the creative process of music is of some significance. According to the melodic features of Chinese folk music, a Chinese folk music composition based on Markov model is proposed to analyze Chinese traditional music. Folk songs with typical Chinese national characteristics are selected for analysis. In this paper, an example of automatic composition is given. The experimental results show that this composition model can produce music with characteristics of Chinese folk music.
... condition appropriate to its use, either during normal operation or in the event of a malfunction, assuming... positive interlocks and sequencing of engagement to prevent improper operation. (f) If the automatic pilot...
... condition appropriate to its use, either during normal operation or in the event of a malfunction, assuming... positive interlocks and sequencing of engagement to prevent improper operation. (f) If the automatic pilot...
Whirley, R.G.; Engelmann, B.E.
This paper presents a new formulation for the automatic definition and treatment of mechanical contact in explicit, nonlinear, finite element analysis. Automatic contact offers the benefits of significantly reduced model construction time and fewer opportunities for user error, but faces significant challenges in reliability and computational costs. The authors have used a new four-step automatic contact algorithm. Key aspects of the proposed method include (1) automatic identification of adjacent and opposite surfaces in the global search phase, and (2) the use of a smoothly varying surface normal that allows a consistent treatment of shell intersection and corner contact conditions without ad hoc rules. Three examples are given to illustrate the performance of the newly proposed algorithm in the public DYNA3D code
García, Fernando Pérez; uk, fernando perezgarcia ucl ac
Presentation of the paper "Automatic classification of MR scans in Alzheimer's disease" by Klöppel et al. for the journal club of the Centre for Doctoral Training in Medical Image Computing at University College London.
... DISABILITY INSURANCE (1950- ) Computing Primary Insurance Amounts Recomputing Your Primary Insurance Amount... any sooner than it would be under an automatic recomputation. You may also waive a recomputation if...
Prepared ca. 2001. The paper describes an algorithm that was developed for estimating reliable and accurate average roadway link travel times using Automatic Vehicle Identification (AVI) data. The algorithm presented is unique in two aspects. First, ...
Chang, Hsien-Tsung; Chang, Yi-Ming; Tsai, Meng-Tze
Leisure travel has become a topic of great interest to Taiwanese residents in recent years. Most residents expect to be able to relax on a vacation during the holidays; however, the complicated procedure of travel itinerary planning is often discouraging and leads them to abandon the idea of traveling. In this paper, we design an automatic travel itinerary planning system for the domestic area (ATIPS) using an algorithm to automatically plan a domestic travel itinerary based on user intentions that allows users to minimize the process of trip planning. Simply by entering the travel time, the departure point, and the destination location, the system can automatically generate a travel itinerary. According to the results of the experiments, 70% of users were satisfied with the result of our system, and 82% of users were satisfied with the automatic user preference learning mechanism of ATIPS. Our algorithm also provides a framework for substituting modules or weights and offers a new method for travel planning.
Kato, I.; Kudo, Y.; Ichimaru, K.
Synthetic polymer models of several degrees of softness were subjected to standard creep tests to determine their viscoelastic characteristics. The automatic measuring apparatus and the theory of measurement used in modeling the human recognition of the softness factor are described.
Zhao, Junsheng; Sun, Sam Zandong
The basis of automatic fault extraction is seismic attributes, such as the coherence cube which is always used to identify a fault by the minimum value. The biggest challenge in automatic fault extraction is noise, including that of seismic data. However, a fault has a better spatial continuity in certain direction, which makes it quite different from noise. Considering this characteristic, a modified ant-colony algorithm is introduced into automatic fault identification and tracking, where the gradient direction and direction consistency are used as constraints. Numerical model test results show that this method is feasible and effective in automatic fault extraction and noise suppression. The application of field data further illustrates its validity and superiority. (paper)
Widyaningrum, V. T.; Pramudita, Y. D.
In general, automation can be described as a process following pre-determined sequential steps with a little or without any human exertion. Automation is provided with the use of various sensors suitable to observe the production processes, actuators and different techniques and devices. In this research, the automation system developed is an automatic lamp and an automatic fan on the smart home. Both of these systems will be processed using an Arduino Mega 2560 microcontroller. A microcontroller is used to obtain values of physical conditions through sensors connected to it. In the automatic lamp system required sensors to detect the light of the LDR (Light Dependent Resistor) sensor. While the automatic fan system required sensors to detect the temperature of the DHT11 sensor. In tests that have been done lamps and fans can work properly. The lamp can turn on automatically when the light begins to darken, and the lamp can also turn off automatically when the light begins to bright again. In addition, it can concluded also that the readings of LDR sensors are placed outside the room is different from the readings of LDR sensors placed in the room. This is because the light intensity received by the existing LDR sensor in the room is blocked by the wall of the house or by other objects. Then for the fan, it can also turn on automatically when the temperature is greater than 25°C, and the fan speed can also be adjusted. The fan may also turn off automatically when the temperature is less than equal to 25°C.
Akbari, Mohammad; Cheng, Howard
One important problem in Musical Information Retrieval is Automatic Music Transcription, which is an automated conversion process from played music to a symbolic notation such as sheet music. Since the accuracy of previous audio-based transcription systems is not satisfactory, we propose an innovative visual-based automatic music transcription system named claVision to perform piano music transcription. Instead of processing the music audio, the system performs the transcription only from the...
Kraft, Dirk; Ellekilde, Lars-Peter; Rytz, Jimmy Alison
and achieve comparable results and that our learning approach can improve system performance significantly. Automatic bin-picking is an important industrial process that can lead to significant savings and potentially keep production in countries with high labour cost rather than outsourcing it. The presented...... work allows to minimize cycle time as well as setup cost, which are essential factors in automatic bin-picking. It therefore leads to a wider applicability of bin-picking in industry....
This paper discussed about how the automatic adjustment mechanism in the pension fund with defined benefits in case conditions beyond assumptions - assumptions that have been determined. Automatic adjustment referred to in this experiment is intended to anticipate changes in economic and demographic conditions. The method discuss in this paper are indexing life expectancy. In this paper discussed about how the methods on private pension fund and how’s the impact of the change of life expectancy on benefit.
Bagci, Ulas; Erzin, Engin
Music genre classification is an essential tool for music information retrieval systems and it has been finding critical applications in various media platforms. Two important problems of the automatic music genre classification are feature extraction and classifier design. This paper investigates inter-genre similarity modelling (IGS) to improve the performance of automatic music genre classification. Inter-genre similarity information is extracted over the mis-classified feature population....
Kristensen, Lars Michael; Westergaard, Michael
Automatic code generation based on Coloured Petri Net (CPN) models is challenging because CPNs allow for the construction of abstract models that intermix control flow and data processing, making translation into conventional programming constructs difficult. We introduce Process-Partitioned CPNs....... The viability of our approach is demonstrated by applying it to automatically generate an Erlang implementation of the Dynamic MANET On-demand (DYMO) routing protocol specified by the Internet Engineering Task Force (IETF)....
Liu Li; Zhao Shujun; Yao Zhiming; Wang Daoyu
An automatic method of extracting left ventricle from SPECT myocardial perfusion data was introduced. This method was based on the least square analysis of the positions of all short-axis slices pixels from the half sphere-cylinder myocardial model, and used a iterative reconstruction technique to automatically cut off the non-left ventricular tissue from the perfusion images. Thereby, this technique provided the bases for further quantitative analysis
Full Text Available The article gives a review of a research on processing and automatic recognition of speech signals (ARR at the Department of Telecommunications of the Faculty of Electrical Engineering, University of iilina. On-going research is oriented to speech parametrization using 2-dimensional cepstral analysis, and to an application of HMMs and neural networks for speech recognition in Slovak language. The article summarizes achieved results and outlines future orientation of our research in automatic speech recognition.
Nakai, Mitsuru; Harald, Singer; Sagisaka, Yoshinori; Shimodaira, Hiroshi
In this paper, we propose an automatic method for detecting accent phrase boundaries in Japanese continuous speech by using F0 information. In the training phase, hand labeled accent patterns are parameterized according to a superpositional model proposed by Fujisaki, and assigned to some clusters by a clustering method, in which accent templates are calculated as centroid of each cluster. In the segmentation phase, automatic N-best extraction of boundaries is performe...
van Merriënboer, Bart; Wiltschko, Alexander B.; Moldovan, Dan
Automatic differentiation (AD) is an essential primitive for machine learning programming systems. Tangent is a new library that performs AD using source code transformation (SCT) in Python. It takes numeric functions written in a syntactic subset of Python and NumPy as input, and generates new Python functions which calculate a derivative. This approach to automatic differentiation is different from existing packages popular in machine learning, such as TensorFlow and Autograd. Advantages ar...
Kabra, Mayank; Robie, Alice A; Rivera-Alba, Marta; Branson, Steven; Branson, Kristin
We present a machine learning-based system for automatically computing interpretable, quantitative measures of animal behavior. Through our interactive system, users encode their intuition about behavior by annotating a small set of video frames. These manual labels are converted into classifiers that can automatically annotate behaviors in screen-scale data sets. Our general-purpose system can create a variety of accurate individual and social behavior classifiers for different organisms, in...
Fonte, Daniela; Cruz, Daniela da; Gançarski, Alda Lopes; Henriques, Pedro Rangel
The research on programs capable to automatically grade source code has been a subject of great interest to many researchers. Automatic Grading Systems (AGS) were born to support programming courses and gained popularity due to their ability to assess, evaluate, grade and manage the students' programming exercises, saving teachers from this manual task. This paper discusses semantic analysis techniques, and how they can be applied to improve the validation and assessment pr...
Shibly, O; Ciancio, S G; Shostad, S; Mather, M; Boardman, T J
The aim of this study was to compare the effectiveness of an automatic flossing device to manual flossing. A total of seventy adult subjects (20 males and 50 females) were stratified into two groups balanced for age, sex, modified gingival index (MGI), plaque index (PI) and bleeding sites (Eastman Bleeding Index) using screening data. One group was randomly assigned the automatic power flosser and the other group was assigned manual dental floss. The subjects were instructed to brush their teeth twice a day (in the morning and before bedtime) for 30 seconds using the provided manual toothbrush and toothpaste. They were also to use their assigned dental floss or automatic power flosser once in the morning following toothbrushing. There was no significant difference between manual flossing and automatic flossing with respect to the MGI and the BI. There was, however, a significant difference at day 15 in the PI; however, this difference was only 0.73%. There was no significant difference in the PI at day 30 between the two techniques. The statistically significant difference noted in the interproximal PI at both day 15 and day 30 was less than 2%. Since the differences in plaque scores between the groups were so small, there was no apparent impact on gingival health since both flossers resulted in similar health benefits. Since there was a marked preference for the automatic flosser, patient compliance with the automatic flossing device may be better than with manual floss. Therefore, overall gingival health may benefit from this device.
Iancu, Iulian; Bodner, Ehud; Joubran, Samia; Lupinsky, Yelena; Barenboim, Damian
Social Anxiety Disorder (SAD) is characterized by fear and avoidance in social situations where one is exposed to scrutiny by others. It is possible that automatic thoughts either cause the disorder or maintain it, and thus their examination is warranted. 30 SAD subjects diagnosed with the MiniInternational Neuropsychiatric Interview (MINI) and 30 healthy controls were administered the Liebowitz Social Anxiety Scale (LSAS), the Automatic Thoughts Questionnaires (ATQ-Negative and ATQ-Positive), the Sheehan Disability Scale (SDS) and the Beck Depression Inventory (BDI). It was hypothesized that the SAD subjects would display more depression and disability, more negative automatic thoughts and fewer positive automatic thoughts than the healthy controls, and that the automatic thoughts will predict the severity of SAD. SAD patients had higher scores of depression and disability, higher scores on the ATQ-Negative questionnaire and lower scores on the ATQ-Positive questionnaire. The scores of the LSAS subscales were predicted by the scores of the ATQ-Positive and the BDI questionnaires. Moderate sample size and limits of the questionnaires used in the study. Automatic thoughts may be an important area of research with larger samples. Further studies should be carried out in order to examine if strengthening positive thinking and ablation of negative thinking can reduce SAD symptoms during cognitive behavioral treatment.
Full Text Available Automatic colorization is generally classified into two groups: propagation-based methods and reference-based methods. In reference-based automatic colorization methods, color image(s are used as reference(s to reconstruct original color of a gray target image. The most important task here is to find the best matching pairs for all pixels between reference and target images in order to transfer color information from reference to target pixels. A lot of attractive local feature-based image matching methods have already been developed for the last two decades. Unfortunately, as far as we know, there are no optimal matching methods for automatic colorization because the requirements for pixel matching in automatic colorization are wholly different from those for traditional image matching. To design an efficient matching algorithm for automatic colorization, clustering pixel with low computational cost and generating descriptive feature vector are the most important challenges to be solved. In this paper, we present a novel method to address these two problems. In particular, our work concentrates on solving the second problem (designing a descriptive feature vector; namely, we will discuss how to learn a descriptive texture feature using scaled sparse texture feature combining with a nonlinear transformation to construct an optimal feature descriptor. Our experimental results show our proposed method outperforms the state-of-the-art methods in terms of robustness for color reconstruction for automatic colorization applications.
Anatoly Fedorovich, Tikhonov; Drozdov, Anatoly
The article describes the factors affecting the concrete mixture quality related to the moisture content of aggregates, since the effectiveness of the concrete mixture production is largely determined by the availability of quality management tools at all stages of the technological process. It is established that the unaccounted moisture of aggregates adversely affects the concrete mixture homogeneity and, accordingly, the strength of building structures. A new control method and the automatic control system of the concrete mixture homogeneity in the technological process of mixing components have been proposed, since the tasks of providing a concrete mixture are performed by the automatic control system of processing kneading-and-mixing machinery with operational automatic control of homogeneity. Theoretical underpinnings of the control of the mixture homogeneity are presented, which are related to a change in the frequency of vibrodynamic vibrations of the mixer body. The structure of the technical means of the automatic control system for regulating the supply of water is determined depending on the change in the concrete mixture homogeneity during the continuous mixing of components. The following technical means for establishing automatic control have been chosen: vibro-acoustic sensors, remote terminal units, electropneumatic control actuators, etc. To identify the quality indicator of automatic control, the system offers a structure flowchart with transfer functions that determine the ACS operation in transient dynamic mode.
Undorf, Monika; Böhm, Simon; Cüpper, Lutz
Current memory theories generally assume that memory performance reflects both recollection and automatic influences of memory. Research on people's predictions about the likelihood of remembering recently studied information on a memory test, that is, on judgments of learning (JOLs), suggests that both magnitude and resolution of JOLs are linked to recollection. However, it has remained unresolved whether JOLs are also predictive of automatic influences of memory. This issue was addressed in 3 experiments. Using the process-dissociation procedure, we assessed the predictive accuracy of immediate and delayed JOLs (Experiment 1) and of immediate JOLs from a first and from a second study-test cycle (Experiments 2 and 3) for recollection and automatic influences. Results showed that each type of JOLs was predictive of both recollection and automatic influences. Moreover, we found that a delay between study and JOL improved the predictive accuracy of JOLs for recollection, while study-test experience improved the predictive accuracy of JOLs for both recollection and automatic influences. These findings demonstrate that JOLs predict not only recollection, but also automatic influences of memory. (PsycINFO Database Record (c) 2016 APA, all rights reserved).
Full Text Available Modern optimization algorithms typically require the setting of a large number of parameters to optimize their performance. The immediate goal of automatic algorithm configuration is to find, automatically, the best parameter settings of an optimizer. Ultimately, automatic algorithm configuration has the potential to lead to new design paradigms for optimization software. The irace package is a software package that implements a number of automatic configuration procedures. In particular, it offers iterated racing procedures, which have been used successfully to automatically configure various state-of-the-art algorithms. The iterated racing procedures implemented in irace include the iterated F-race algorithm and several extensions and improvements over it. In this paper, we describe the rationale underlying the iterated racing procedures and introduce a number of recent extensions. Among these, we introduce a restart mechanism to avoid premature convergence, the use of truncated sampling distributions to handle correctly parameter bounds, and an elitist racing procedure for ensuring that the best configurations returned are also those evaluated in the highest number of training instances. We experimentally evaluate the most recent version of irace and demonstrate with a number of example applications the use and potential of irace, in particular, and automatic algorithm configuration, in general.
Garijo, D.; Kejriwal, M.; Pierce, S. A.; Houser, P. I. Q.; Peckham, S. D.; Stanko, Z.; Hardesty Lewis, D.; Gil, Y.; Pennington, D. D.; Knoblock, C.
Data integration applications are ubiquitous in scientific disciplines. A state-of-the-art data integration system accepts both a set of data sources and a target ontology as input, and semi-automatically maps the data sources in terms of concepts and relationships in the target ontology. Mappings can be both complex and highly domain-specific. Once such a semantic model, expressing the mapping using community-wide standard, is acquired, the source data can be stored in a single repository or database using the semantics of the target ontology. However, acquiring the mapping is a labor-prone process, and state-of-the-art artificial intelligence systems are unable to fully automate the process using heuristics and algorithms alone. Instead, a more realistic goal is to develop adaptive tools that minimize user feedback (e.g., by offering good mapping recommendations), while at the same time making it intuitive and easy for the user to both correct errors and to define complex mappings. We present Karma, a data integration system that has been developed over multiple years in the information integration group at the Information Sciences Institute, a research institute at the University of Southern California's Viterbi School of Engineering. Karma is a state-of-the-art data integration tool that supports an interactive graphical user interface, and has been featured in multiple domains over the last five years, including geospatial, biological, humanities and bibliographic applications. Karma allows a user to import their own ontology and datasets using widely used formats such as RDF, XML, CSV and JSON, can be set up either locally or on a server, supports a native backend database for prototyping queries, and can even be seamlessly integrated into external computational pipelines, including those ingesting data via streaming data sources, Web APIs and SQL databases. We illustrate a Karma workflow at a conceptual level, along with a live demo, and show use cases of
Wang, Wiley; Teo, Patrick; Muzzolini, Russ
The diversity of photo products has grown more than ever before. A group of photos are not only printed individually, but also can be arranged in specific order to tell a story, such as in a photo book, a calendar or a poster collage. Similar to making a traditional scrapbook, digital photo book tools allow the user to choose a book style/theme, layouts of pages, backgrounds and the way the pictures are arranged. This process is often time consuming to users, given the number of images and the choices of layout/background combinations. In this paper, we developed a system to automatically generate photo books with only a few initial selections required. The system utilizes time stamps, color indices, orientations and other image properties to best fit pictures into a final photo book. The common way of telling a story is to lay the pictures out in chronological order. If the pictures are proximate in time, they will coincide with each other and are often logically related. The pictures are naturally clustered along a time line. Breaks between clusters can be used as a guide to separate pages or spreads, thus, pictures that are logically related can stay close on the same page or spread. When people are making a photo book, it is helpful to start with chronologically grouped images, but time alone wont be enough to complete the process. Each page is limited by the number of layouts available. Many aesthetic rules also apply, such as, emphasis of preferred pictures, consistency of local image density throughout the whole book, matching a background to the content of the images, and the variety of adjacent page layouts. We developed an algorithm to group images onto pages under the constraints of aesthetic rules. We also apply content analysis based on the color and blurriness of each picture, to match backgrounds and to adjust page layouts. Some of our aesthetic rules are fixed and given by designers. Other aesthetic rules are statistic models trained by using
Full Text Available In this paper, we present a proposition of a fully automatic classification of VHR satellite images. Unlike the most widespread approaches: supervised classification, which requires prior defining of class signatures, or unsupervised classification, which must be followed by an interpretation of its results, the proposed method requires no human intervention except for the setting of the initial parameters. The presented approach bases on both spectral and textural analysis of the image and consists of 3 steps. The first step, the analysis of spectral data, relies on NDVI values. Its purpose is to distinguish between basic classes, such as water, vegetation and non-vegetation, which all differ significantly spectrally, thus they can be easily extracted basing on spectral analysis. The second step relies on granulometric maps. These are the product of local granulometric analysis of an image and present information on the texture of each pixel neighbourhood, depending on the texture grain. The purpose of texture analysis is to distinguish between different classes, spectrally similar, but yet of different texture, e.g. bare soil from a built-up area, or low vegetation from a wooded area. Due to the use of granulometric analysis, based on mathematical morphology opening and closing, the results are resistant to the border effect (qualifying borders of objects in an image as spaces of high texture, which affect other methods of texture analysis like GLCM statistics or fractal analysis. Therefore, the effectiveness of the analysis is relatively high. Several indices based on values of different granulometric maps have been developed to simplify the extraction of classes of different texture. The third and final step of the process relies on a vegetation index, based on near infrared and blue bands. Its purpose is to correct partially misclassified pixels. All the indices used in the classification model developed relate to reflectance values, so the
Mäkinen, T. & Oei, H.-l.
This paper explains the need for automatic enforcement, and reviews: (1) applications of automatic enforcement. Automatic enforcement has been carried out for about 20 years. Despite this, the number of scientific and experimental studies dealing with the effects of automatic traffic enforcement
Leonor Scliar Cabral
Full Text Available In this article I will discuss the automatic and creative skills in reading, focusing on the differences between 1 processes involved while learning how to read and processes employed by the proficient reader and 2 knowledge for using language and metalinguistic awareness. The arguments will derive mainly from the definition of reading as a process where the receivers combine the information extracted from the written material with their specialized knowledge activated during this process (i.e. linguistic systems and correspondent rules and enciclopedic knowledge in order to comprehend, interpret and internalize structured new information and/or to experience aesthetic pleasure. Evidence to illustrate the arguments comes from experiments (1 with pre-school children and beginning readers on narrativity and on the dichotic paradigm, and with illiterate and literate adults with diferent levels of proficiency of reading in a task of erasing an initial syllable and an initial consonant. In this article I will discuss the automatic and creative skills in reading, focusing on the differences between 1 processes involved while learning how to read and processes employed by the proficient reader and 2 knowledge for using language and metalinguistic awareness. The arguments will derive mainly from the definition of reading as a process where the receivers combine the information extracted from the written material with their specialized knowledge activated during this process (i.e. linguistic systems and correspondent rules and enciclopedic knowledge in order to comprehend, interpret and internalize structured new information and/or to experience aesthetic pleasure. Evidence to illustrate the arguments comes from experiments (1 with pre-school children and beginning readers on narrativity and on the dichotic paradigm, and with illiterate and literate adults with diferent levels of proficiency of reading in a task of erasing an initial syllable
Kimura, Motohiro; Schröger, Erich; Czigler, István; Ohira, Hideki
For our adaptive behavior in a dynamically changing environment, an essential task of the brain is to automatically encode sequential regularities inherent in the environment into a memory representation. Recent studies in neuroscience have suggested that sequential regularities embedded in discrete sensory events are automatically encoded into a memory representation at the level of the sensory system. This notion is largely supported by evidence from investigations using auditory mismatch negativity (auditory MMN), an event-related brain potential (ERP) correlate of an automatic memory-mismatch process in the auditory sensory system. However, it is still largely unclear whether or not this notion can be generalized to other sensory modalities. The purpose of the present study was to investigate the contribution of the visual sensory system to the automatic encoding of sequential regularities using visual mismatch negativity (visual MMN), an ERP correlate of an automatic memory-mismatch process in the visual sensory system. To this end, we conducted a sequential analysis of visual MMN in an oddball sequence consisting of infrequent deviant and frequent standard stimuli, and tested whether the underlying memory representation of visual MMN generation contains only a sensory memory trace of standard stimuli (trace-mismatch hypothesis) or whether it also contains sequential regularities extracted from the repetitive standard sequence (regularity-violation hypothesis). The results showed that visual MMN was elicited by first deviant (deviant stimuli following at least one standard stimulus), second deviant (deviant stimuli immediately following first deviant), and first standard (standard stimuli immediately following first deviant), but not by second standard (standard stimuli immediately following first standard). These results are consistent with the regularity-violation hypothesis, suggesting that the visual sensory system automatically encodes sequential
Cheeseman, P. C.
The program AUTOCLASS III, Automatic Class Discovery from Data, uses Bayesian probability theory to provide a simple and extensible approach to problems such as classification and general mixture separation. Its theoretical basis is free from ad hoc quantities, and in particular free of any measures which alter the data to suit the needs of the program. As a result, the elementary classification model used lends itself easily to extensions. The standard approach to classification in much of artificial intelligence and statistical pattern recognition research involves partitioning of the data into separate subsets, known as classes. AUTOCLASS III uses the Bayesian approach in which classes are described by probability distributions over the attributes of the objects, specified by a model function and its parameters. The calculation of the probability of each object's membership in each class provides a more intuitive classification than absolute partitioning techniques. AUTOCLASS III is applicable to most data sets consisting of independent instances, each described by a fixed length vector of attribute values. An attribute value may be a number, one of a set of attribute specific symbols, or omitted. The user specifies a class probability distribution function by associating attribute sets with supplied likelihood function terms. AUTOCLASS then searches in the space of class numbers and parameters for the maximally probable combination. It returns the set of class probability function parameters, and the class membership probabilities for each data instance. AUTOCLASS III is written in Common Lisp, and is designed to be platform independent. This program has been successfully run on Symbolics and Explorer Lisp machines. It has been successfully used with the following implementations of Common LISP on the Sun: Franz Allegro CL, Lucid Common Lisp, and Austin Kyoto Common Lisp and similar UNIX platforms; under the Lucid Common Lisp implementations on VAX/VMS v5
Full Text Available In order to meet the requirements of high real-time and high stability of data transmission in automatic welding system, RTU data format and real-time communication mechanism are adopted in this system. In the automatic logistics system through the Ethernet and wireless WIFI technology will palletizer, stacker, AGV car organically together to complete the palletizer automatic crawling the goods, AGV car automatic delivery, stacking machine automatically out of the Dimensional warehouse. .
Sun Xuan; Wang Zhi-yong; Ma Zhe-dong
In order to meet the requirements of high real-time and high stability of data transmission in automatic welding system, RTU data format and real-time communication mechanism are adopted in this system. In the automatic logistics system through the Ethernet and wireless WIFI technology will palletizer, stacker, AGV car organically together to complete the palletizer automatic crawling the goods, AGV car automatic delivery, stacking machine automatically out of the Dimensional warehouse. .
Cheung, Kyung Mo; Cheung, Hwan
In recent years the concept of quality assurance in radiology has become as popular as the apple pie. Unfortunately, however, the concept means different things to different people. Furthermore, the methods proposed are very many and diversified. The present article will focus on the quality assurance in the use of the automatic processor equipment. With automatic film processors, there are many factors which can cause a reduction in image quality, but they center on the following: (1) chemical solutions, (2) mechanical parts of the equipment, and (3) faults in processing and its management, which are discussed in some detail. Quality assurance helps to ensure satisfactory performance of the automatic processor equipment for high image quality. The following record keeping is required: - For equipment quality control: 1) daily maintenance record, 2) weekly maintenance record. 3) monthly main tenancy record, and 4) ph value record based on tests with litmus paper. - Training of the personal is required in the following subjects: 1) safety in processing operation, 2) management of the automatic processor equipment (a manual will be used), 3) acquisition and absorption of latest information on the automatic processor equipment system. - The procedures described above are considered necessary for efficient processing operations which will give high and uniform image quality
Hoshi, Toshiro; Sugimoto, Noboru
At worksites, various automatic production machines are in use to release workers from muscular labor or labor in the detrimental environment. On the other hand, a large number of industrial accidents have been caused by automatic production machines. In view of this, this paper considers the operation of automatic production machines from the viewpoint of accident prevention, and points out two types of machine operation - operation for which quick performance is required (operation that is not permitted to be delayed) - and operation for which composed performance is required (operation that is not permitted to be performed in haste). These operations are distinguished by operation buttons of suitable colors and shapes. This paper shows that these characteristics are evaluated as "asymmetric on the time-axis". Here, in order for workers to accept the risk of automatic production machines, it is preconditioned in general that harm should be sufficiently small or avoidance of harm is easy. In this connection, this paper shows the possibility of facilitating the acceptance of the risk of automatic production machines by enhancing the asymmetric on the time-axis.
Selander, Helena; Bolin, Ingrid; Falkmer, Torbjörn
Most older drivers continue to drive as they age. To maintain safe and independent transport, mobility is important for all individuals, but especially for older drivers. The objective of this study was to investigate whether automatic transmission, compared with manual transmission, may improve the driving behavior of older drivers. In total, 31 older drivers (mean age 75.2 years) and 32 younger drivers - used as a control group (mean age 39.2 years) - were assessed twice on the same fixed route; once in a car with manual transmission and once in a car with automatic transmission. The cars were otherwise identical. The driving behavior was assessed with the Ryd On-Road Assessment driving protocol. Time to completion of left turns (right-hand side driving) and the impact of a distraction task were measured. The older group had more driving errors than the younger group, in both the manual and the automatic transmission car. However, and contrary to the younger drivers, automatic transmission improved the older participants' driving behavior as demonstrated by safer speed adjustment in urban areas, greater maneuvering skills, safer lane position and driving in accordance with the speed regulations. Switching to automatic transmission may be recommended for older drivers as a means to maintain safe driving and thereby the quality of their transport mobility. Copyright © 2011 S. Karger AG, Basel.
Cortis, J; Falk, J; Rothschild, M A
Due to continuing modernisation, the number of automatic doors in routine use, including powered revolving doors, has increased in recent years. Automatic revolving doors are found mostly in department stores, airports, railway stations and hospitals. Although safety arrangements and guidelines concerning the installation of automatic doors are in existence, their disregard in conjunction with obsolete or incorrect installation can lead to fatal accidents. In this report, a 19-month-old boy is described whose right arm was caught between the elements of an automatic revolving door. As a direct result of rescue attempts, the child's body was drawn further into the narrow gap between elements of the door. To get the boy's body out of the 4-cm-wide gap between the fixed outer wall of the revolving door and the revolving inner, back-up batteries had to be disconnected so as to stop the electrical motor powering the door. Cardiopulmonary resuscitation was begun immediately after the rescue but was unsuccessful; the child was declared dead at the hospital he was taken to. The cause of death was a combination of compression-related skull and brain injury together with thoracic compression. This case shows an outstanding example of the preventive aspect as a special task of forensic medicine. Additionally, it serves as a warning for the correct installation and use of automatic revolving doors. Even so, small children should not use these doors on their own, but only with an alert companion, so as to prevent further fatal accidents of this sort.
List, Johann-Mattis; Greenhill, Simon J; Gray, Russell D
The amount of data from languages spoken all over the world is rapidly increasing. Traditional manual methods in historical linguistics need to face the challenges brought by this influx of data. Automatic approaches to word comparison could provide invaluable help to pre-analyze data which can be later enhanced by experts. In this way, computational approaches can take care of the repetitive and schematic tasks leaving experts to concentrate on answering interesting questions. Here we test the potential of automatic methods to detect etymologically related words (cognates) in cross-linguistic data. Using a newly compiled database of expert cognate judgments across five different language families, we compare how well different automatic approaches distinguish related from unrelated words. Our results show that automatic methods can identify cognates with a very high degree of accuracy, reaching 89% for the best-performing method Infomap. We identify the specific strengths and weaknesses of these different methods and point to major challenges for future approaches. Current automatic approaches for cognate detection-although not perfect-could become an important component of future research in historical linguistics.
Pekrul, P.J.; Thiele, A.W.
A description is given of a process for automatically analysing separate signal processing channels in real time, one channel per signal, in a facility with significant background noise in signals varying in time and coming from transducers at selected points for the continuous monitoring of the operating conditions of the various components of the installation. The signals are intended to determine potential breakdowns, determine conclusions as to the severity of these potential breakdowns and indicate to an operator the measures to be taken in consequence. The feature of this process is that it comprises the automatic and successive selection of each channel for the purpose of spectral analysis, the automatic processing of the signal of each selected channel to show energy spectrum density data at pre-determined frequencies, the automatic comparison of the energy spectrum density data of each channel with pre-determined sets of limits varying with the frequency, and the automatic indication to the operator of the condition of the various components of the installation associated to each channel and the measures to be taken depending on the set of limits [fr
Kacy, K.; Kwiatkowski, M.; Lankosz, M.
This paper discuss design and operation of an automatic system for control of skip hoisting in the Barbara-Chorzow black coal mine in Poland. The control system for skip hoists consists of the CKD manual control system and an automatic control system developed in Poland. Number of common elements of the 2 control systems was reduced to a minimum. Main functional elements of the automatic control system are described: a control-point setting element, a hoisting-speed control element, and element for control of hoisting current and for limiting current during stoppage, a relay control and protection element. Design of the elements is shown in 11 schemes and diagrams. The system is characterized by low price and installation cost (550,000 zlotys) in comparison to cost of the ASEA control system (1,800,000 zlotys) or that of the PMUE system (1,200,000 zlotys), high reliability and control efficiency. In spite of increased ambient temperature, temperature of the drive system with the automatic control system was within permissible limits. Performance tests showed that an independent system for manual and automatic control of hoist drive is superior to an integrated control system. 2 refs.
Smith, James F., III
A fuzzy logic resource manager (RM) that enables a collection of unmanned aerial vehicles (UAVs) to automatically cooperate to make meteorological measurements will be discussed. The RM renders the UAVs autonomous allowing them to change paths and cooperate without human intervention. Innovations related to the "priority for helping" (PH) fuzzy decision tree (FDT) used by the RM will be discussed. The PH FDT permits three types of automatic cooperation between the UAVs. A subroutine of the communications routing algorithm (CRA) used by the RM is also examined. The CRA allows the UAVs to reestablish communications if needed by changing their behavior. A genetic program (GP) based procedure for automatically creating FDTs is briefly described. A GP is an algorithm based on the theory of evolution that automatically evolves mathematical expressions or computer algorithms. The GP data mines a scenario database to automatically create the FDTs. A recently invented co-evolutionary process that allows improvement of the initially data mined FDT will be discussed. Co-evolution uses a genetic algorithm (GA) to evolve scenarios to augment the GP's scenario database. The GP data mines the augmented database to discover an improved FDT. The process is iterated ultimately evolving a very robust FDT. Improvements to the PH FDT offered through co-evolution are discussed. UAV simulations using the improved PH FDT and CRA are provided.
Koenig, Matthias; Laue, Hendrik; Boehler, Tobias; Peitgen, Heinz-Otto
The automatic segmentation of relevant structures such as skin edge, chest wall, or nipple in dynamic contrast enhanced MR imaging (DCE MRI) of the breast provides additional information for computer aided diagnosis (CAD) systems. Automatic reporting using BI-RADS criteria benefits of information about location of those structures. Lesion positions can be automatically described relatively to such reference structures for reporting purposes. Furthermore, this information can assist data reduction for computation expensive preprocessing such as registration, or for visualization of only the segments of current interest. In this paper, a novel automatic method for determining the air-breast boundary resp. skin edge, for approximation of the chest wall, and locating of the nipples is presented. The method consists of several steps which are built on top of each other. Automatic threshold computation leads to the air-breast boundary which is then analyzed to determine the location of the nipple. Finally, results of both steps are starting point for approximation of the chest wall. The proposed process was evaluated on a large data set of DCE MRI recorded by T1 sequences and yielded reasonable results in all cases.
Anuwongnukroh, N.; Dechkunakorn, S.; Damrongsri, S.; Nilwarat, C.; Pudpong, N.; Radomsutthisarn, W.; Kangern, S.
This study was to assess the accuracy of an automatic cephalometric analysis software in the identification of cephalometric landmarks. Thirty randomly selected digital lateral cephalograms of patients undergoing orthodontic treatment were used in this study. Thirteen landmarks (S, N, Or, A-point, U1T, U1A, B-point, Gn, Pog, Me, Go, L1T, and L1A) were identified on the digital image by an automatic cephalometric software and on cephalometric tracing by manual method. Superimposition of printed image and manual tracing was done by registration at the soft tissue profiles. The accuracy of landmarks located by the automatic method was compared with that of the manually identified landmarks by measuring the mean differences of distances of each landmark on the Cartesian plane where X and Y coordination axes passed through the center of ear rod. One-Sample T test was used to evaluate the mean differences. Statistically significant mean differences (p4mm) in vertical direction. Only 5 of 13 landmarks (38.46%; S, N, Gn, Pog, and Go) showed no significant mean difference between the automatic and manual landmarking methods. It is concluded that if this automatic cephalometric analysis software is used for orthodontic diagnosis, the orthodontist must correct or modify the position of landmarks in order to increase the accuracy of cephalometric analysis.
Rubin, Marc J.
In this dissertation, we present our research contributions geared towards creating an automated and efficient wireless sensor network (WSN) for geohazard monitoring. Specifically, this dissertation addresses three overall technical research problems inherent in implementing and deploying such a WSN, i.e., 1) automated event detection from geophysical data, 2) efficient wireless transmission, and 3) low-cost wireless hardware. In addition, after presenting algorithms, experimentation, and results from these three overall problems, we take a step back and discuss how, when, and why such scientific work matters in a geohazardous risk scenario. First, in Chapter 2, we discuss automated geohazard event detection within geophysical data. In particular, we present our pattern recognition workflow that can automatically detect snow avalanche events in seismic (geophone sensor) data. This workflow includes customized signal preprocessing for feature extraction, cluster-based stratified sub-sampling for majority class reduction, and experimentation with 12 different machine learning algorithms; results show that a decision stump classifier achieved 99.8% accuracy, 88.8% recall, and 13.2% precision in detecting avalanches within seismic data collected in the mountains above Davos, Switzerland, an improvement on previous work in the field. To address the second overall research problem (i.e., efficient wireless transmission), we present and evaluate our on-mote compressive sampling algorithm called Randomized Timing Vector (RTV) in Chapter 3 and compare our approach to four other on-mote, lossy compression algorithms in Chapter 4. Results from our work show that our RTV algorithm outperforms current on-mote compressive sampling algorithms and performs comparably to (and in many cases better than) the four state-of-the-art, on-mote lossy compression techniques. The main benefit of RTV is that it can guarantee a desired level of compression performance (and thus, radio usage
Full Text Available Accurate detection of the borders of skin lesions is a vital first step for computer aided diagnostic systems. This paper presents a novel automatic approach to segmentation of skin lesions that is particularly suitable for analysis of dermoscopic images. Assumptions about the image acquisition, in particular, the approximate location and color, are used to derive an automatic rule to select small seed regions, likely to correspond to samples of skin and the lesion of interest. The seed regions are used as initial training samples, and the lesion segmentation problem is treated as binary classification problem. An iterative hybrid classification strategy, based on a weighted combination of estimated posteriors of a linear and quadratic classifier, is used to update both the automatically selected training samples and the segmentation, increasing reliability and final accuracy, especially for those challenging images, where the contrast between the background skin and lesion is low.
Bargh, J A; Ferguson, M J
The first 100 years of experimental psychology were dominated by 2 major schools of thought: behaviorism and cognitive science. Here the authors consider the common philosophical commitment to determinism by both schools, and how the radical behaviorists' thesis of the determined nature of higher mental processes is being pursued today in social cognition research on automaticity. In harmony with "dual process" models in contemporary cognitive science, which equate determined processes with those that are automatic and which require no intervening conscious choice or guidance, as opposed to "controlled" processes which do, the social cognition research on the automaticity of higher mental processes provides compelling evidence for the determinism of those processes. This research has revealed that social interaction, evaluation and judgment, and the operation of internal goal structures can all proceed without the intervention of conscious acts of will and guidance of the process.
Park, Pil Ho
It is necessary for GPS center to establish automatization as effective management of GPS network including data gathering, data transformation, data backup, data sending to IGS (International GPS Service for geodynamics), and precise ephemerides gathering. The operating program of GPS center has been adopted at KCSC (Korea Cadastral Survey Corporation), NGI (National Geography Institute), MOMAF (Ministry of Maritime Affairs and Fisheries) without self-development of core technique. The automatic management of GPS network is consists of GPS data management and data processing. It is also fundamental technique, which should be accomplished by every GPS centers. Therefore, this study carried out analyzing of Japanese GPS center, which has accomplished automatization by module considering applicability for domestic GPS centers
Tamimi-Sarnikowski, Philip; Brink-Kjær, Andreas; Moshavegh, Ramin
was evaluated empirically and applied to a dataset of in-vivo 1770 images recorded from 8 healthy subjects. The segmentation results were compared to manual delineation performed by two experienced users. The results showed a sensitivity and specificity of 90.41 ± 11.2 % and 97.93 ± 5.7 % (mean ± standard......Ultrasound has become highly popular to monitor atherosclerosis, by scanning the carotid artery. The screening involves measuring the thickness of the vessel wall and diameter of the lumen. An automatic segmentation of the vessel lumen, can enable the determination of lumen diameter. This paper...... presents a fully automatic segmentation algorithm, for robustly segmenting the vessel lumen in longitudinal B-mode ultrasound images. The automatic segmentation is performed using a combination of B-mode and power Doppler images. The proposed algorithm includes a series of preprocessing steps, and performs...
Gilmore, John F.
The recognition of targets in thermal imagery has been a problem exhaustively analyzed in its current localized dimension. This paper discusses the application of artificial intelligence (AI) technology to automatic target recognition, a concept capable of expanding current ATR efforts into a new globalized dimension. Deficiencies of current automatic target recognition systems are reviewed in terms of system shortcomings. Areas of artificial intelligence which show the most promise in improving ATR performance are analyzed, and a timeline is formed in light of how near (as well as far) term artificial intelligence applications may exist. Current research in the area of high level expert vision systems is reviewed and the possible utilization of artificial intelligence architectures to improve low level image processing functions is also discussed. Additional application areas of relevance to solving the problem of automatic target recognition utilizing both high and low level processing are also explored.
Full Text Available School shooters present a challenge to both forensic psychiatry and law enforcement agencies. The relatively small number of school shooters, their various charateristics, and the lack of in-depth analysis of all of the shooters prior to the shooting add complexity to our understanding of this problem. In this short paper, we introduce a new methodology for automatically profiling school shooters. The methodology involves automatic analysis of texts and the production of several measures relevant for the identification of the shooters. Comparing texts written by six school shooters to 6056 texts written by a comparison group of male subjects, we found that the shooters' texts scored significantly higher on the Narcissistic Personality dimension as well as on the Humilated and Revengeful dimensions. Using a ranking/priorization procedure, similar to the one used for the automatic identification of sexual predators, we provide support for the validity and relevance of the proposed methodology.
Le Go, R.; Cosnac, B. de; Spiwack, A.
The A.S.T.I. is an automatic system relating to the fast conversational processing of all kinds of images (cells, chromosomes) converted to a numerical data set (120000 points, 16 grey levels stored in a MOS memory) through a fast D.O. analyzer. The system performs automatically the isolation of any individual image, the area and weighted area of which are computed. These results are directly displayed on the command panel and can be transferred to a mini-computer for further computations. A bright spot allows parts of an image to be picked out and the results to be displayed. This study is particularly directed towards automatic karyo-typing [fr
Olson, Michael A; Fazio, Russell H
The authors report a set of experiments that use an implicit evaluative conditioning procedure to reduce automatically activated racial prejudice in White participants in a short period and with relatively few trials. Experiment 1 demonstrated that participants were unaware of the repeated conditioned stimulus-unconditioned stimulus (CS-US) pairings of Black-good and White-bad. In Experiment 2, the procedure was found to be effective in reducing prejudice as indicated by an evaluative priming measure of automatically activated racial attitudes. In Experiment 3, this reduction in prejudice was found to persist throughout a 2-day separation between the conditioning procedure and the administration of the dependent measure. The implications of the present findings for the persistence of automatically activated racial prejudice are discussed.
Satake, Hiroshi; Ikegami, Kouichi.
The automatic measurement system for the light element isotope analysis was developed by installing the specially designed inlet system which was controlled by a computer. The microcomputer system contains specific interface boards for the inlet system and the mass spectrometer, Micromass 602 E. All the components of the inlet and the computer system installed are easily available in Japan. Ten samples can be automatically measured as a maximum of. About 160 minutes are required for 10 measurements of δ 18 O values of CO 2 . Thus four samples can be measured per an hour using this system, while usually three samples for an hour using the manual operation. The automatized analysis system clearly has an advantage over the conventional method. This paper describes the details of this automated system, such as apparatuses used, the control procedure and the correction for reliable measurement. (author)
Increasingly, critical incident reports are used as a means to increase patient safety and quality of care. The entire potential of these sources of experiential knowledge remains often unconsidered since retrieval and analysis is difficult and time-consuming, and the reporting systems often do not provide support for these tasks. The objective of this paper is to identify potential use cases for automatic methods that analyse critical incident reports. In more detail, we will describe how faceted search could offer an intuitive retrieval of critical incident reports and how text mining could support in analysing relations among events. To realise an automated analysis, natural language processing needs to be applied. Therefore, we analyse the language of critical incident reports and derive requirements towards automatic processing methods. We learned that there is a huge potential for an automatic analysis of incident reports, but there are still challenges to be solved.
Sun, Chao; Zhang, Xinlu; Zheng, Nenggan; Chen, Weidong; Zheng, Xiaoxiang
Bio-robots that controlled by outer stimulation through brain computer interface (BCI) suffer from the dependence on realtime guidance of human operators. Current automatic navigation methods for bio-robots focus on the controlling rules to force animals to obey man-made commands, with animals' intelligence ignored. This paper proposes a new method to realize the automatic navigation for bio-robots with electrical micro-stimulation as real-time rewards. Due to the reward-seeking instinct and trial-and-error capability, bio-robot can be steered to keep walking along the right route with rewards and correct its direction spontaneously when rewards are deprived. In navigation experiments, rat-robots learn the controlling methods in short time. The results show that our method simplifies the controlling logic and realizes the automatic navigation for rat-robots successfully. Our work might have significant implication for the further development of bio-robots with hybrid intelligence.
Walsh, E; Mehta, M A; Oakley, D A; Guilmette, D N; Gabay, A; Halligan, P W; Deeley, Q
Our sense of self includes awareness of our thoughts and movements, and our control over them. This feeling can be altered or lost in neuropsychiatric disorders as well as in phenomena such as "automatic writing" whereby writing is attributed to an external source. Here, we employed suggestion in highly hypnotically suggestible participants to model various experiences of automatic writing during a sentence completion task. Results showed that the induction of hypnosis, without additional suggestion, was associated with a small but significant reduction of control, ownership, and awareness for writing. Targeted suggestions produced a double dissociation between thought and movement components of writing, for both feelings of control and ownership, and additionally, reduced awareness of writing. Overall, suggestion produced selective alterations in the control, ownership, and awareness of thought and motor components of writing, thus enabling key aspects of automatic writing, observed across different clinical and cultural settings, to be modelled. Copyright © 2014. Published by Elsevier Inc.
Ogohara, Kazunori; Watanabe, Takeru; Okumura, Susumu; Hatanaka, Yuji
This paper presents an improved algorithm for automatic detection of Martian dust devils that successfully extracts tiny bright dust devils and obscured large dust devils from two subtracted landscape images. These dust devils are frequently observed using visible cameras onboard landers or rovers. Nevertheless, previous research on automated detection of dust devils has not focused on these common types of dust devils, but on dust devils that appear on images to be irregularly bright and large. In this study, we detect these common dust devils automatically using two kinds of parameter sets for thresholding when binarizing subtracted images. We automatically extract dust devils from 266 images taken by the Spirit rover to evaluate our algorithm. Taking dust devils detected by visual inspection to be ground truth, the precision, recall and F-measure values are 0.77, 0.86, and 0.81, respectively.
Eun Hye Choi
Full Text Available Embedded systems have become increasingly connected and communicate with each other, forming large-scaled and complicated network systems. To make their design and testing more reliable and robust, this paper proposes a formal specification language called SENS and a SENS-based automatic test generation tool called TGSENS. Our approach is summarized as follows: (1 A user describes requirements of target embedded network systems by logical property-based constraints using SENS. (2 Given SENS specifications, test cases are automatically generated using a SAT-based solver. Filtering mechanisms to select efficient test cases are also available in our tool. (3 In addition, given a testing goal by the user, test sequences are automatically extracted from exhaustive test cases. We’ve implemented our approach and conducted several experiments on practical case studies. Through the experiments, we confirmed the efficiency of our approach in design and test generation of real embedded air-conditioning network systems.
Sapkota, Manish; Xing, Fuyong; Su, Hai; Yang, Lin
Diseased skeletal muscle expresses mononuclear cell infiltration in the regions of perimysium. Accurate annotation or segmentation of perimysium can help biologists and clinicians to determine individualized patient treatment and allow for reasonable prognostication. However, manual perimysium annotation is time consuming and prone to inter-observer variations. Meanwhile, the presence of ambiguous patterns in muscle images significantly challenge many traditional automatic annotation algorithms. In this paper, we propose an automatic perimysium annotation algorithm based on deep convolutional neural network (CNN). We formulate the automatic annotation of perimysium in muscle images as a pixel-wise classification problem, and the CNN is trained to label each image pixel with raw RGB values of the patch centered at the pixel. The algorithm is applied to 82 diseased skeletal muscle images. We have achieved an average precision of 94% on the test dataset.
Corliss, G.F.; Griewank, A.
We present an example of the science that is enabled by object-oriented programming techniques. Scientific computation often needs derivatives for solving nonlinear systems such as those arising in many PDE algorithms, optimization, parameter identification, stiff ordinary differential equations, or sensitivity analysis. Automatic differentiation computes derivatives accurately and efficiently by applying the chain rule to each arithmetic operation or elementary function. Operator overloading enables the techniques of either the forward or the reverse mode of automatic differentiation to be applied to real-world scientific problems. We illustrate automatic differentiation with an example drawn from a model of unsaturated flow in a porous medium. The problem arises from planning for the long-term storage of radioactive waste
Kasenburg, Niklas; Liptrot, Matthew George; Reislev, Nina Linde
knowledge. Here we demonstrate how such prior knowledge, or indeed any prior spatial information, can be automatically incorporated into a shortest-path tractography approach to produce more robust results. We describe how such a prior can be automatically generated (learned) from a population, and we......Tractography is the standard tool for automatic delineation of white matter tracts from diffusion weighted images. However, the output of tractography often requires post-processing to remove false positives and ensure a robust delineation of the studied tract, and this demands expert prior...... demonstrate that our framework also retains support for conventional interactive constraints such as waypoint regions. We apply our approach to the open access, high quality Human Connectome Project data, as well as a dataset acquired on a typical clinical scanner. Our results show that the use of a learned...
Full Text Available Abstract Background Automatic measurement of arterial blood pressure is important, but the available commercial automatic blood pressure meters, mostly based on oscillometry, are of low accuracy. Methods In this study, we present a cuff-based technique for automatic measurement of systolic blood pressure, based on photoplethysmographic signals measured simultaneously in fingers of both hands. After inflating the pressure cuff to a level above systolic blood pressure in a relatively slow rate, it is slowly deflated. The cuff pressure for which the photoplethysmographic signal reappeared during the deflation of the pressure-cuff was taken as the systolic blood pressure. The algorithm for the detection of the photoplethysmographic signal involves: (1 determination of the time-segments in which the photoplethysmographic signal distal to the cuff is expected to appear, utilizing the photoplethysmographic signal in the free hand, and (2 discrimination between random fluctuations and photoplethysmographic pattern. The detected pulses in the time-segments were identified as photoplethysmographic pulses if they met two criteria, based on the pulse waveform and on the correlation between the signal in each segment and the signal in the two neighboring segments. Results Comparison of the photoplethysmographic-based automatic technique to sphygmomanometry, the reference standard, shows that the standard deviation of their differences was 3.7 mmHg. For subjects with systolic blood pressure above 130 mmHg the standard deviation was even lower, 2.9 mmHg. These values are much lower than the 8 mmHg value imposed by AAMI standard for automatic blood pressure meters. Conclusion The photoplethysmographic-based technique for automatic measurement of systolic blood pressure, and the algorithm which was presented in this study, seems to be accurate.
Nitzan, Meir; Patron, Amikam; Glik, Zehava; Weiss, Abraham T
Automatic measurement of arterial blood pressure is important, but the available commercial automatic blood pressure meters, mostly based on oscillometry, are of low accuracy. In this study, we present a cuff-based technique for automatic measurement of systolic blood pressure, based on photoplethysmographic signals measured simultaneously in fingers of both hands. After inflating the pressure cuff to a level above systolic blood pressure in a relatively slow rate, it is slowly deflated. The cuff pressure for which the photoplethysmographic signal reappeared during the deflation of the pressure-cuff was taken as the systolic blood pressure. The algorithm for the detection of the photoplethysmographic signal involves: (1) determination of the time-segments in which the photoplethysmographic signal distal to the cuff is expected to appear, utilizing the photoplethysmographic signal in the free hand, and (2) discrimination between random fluctuations and photoplethysmographic pattern. The detected pulses in the time-segments were identified as photoplethysmographic pulses if they met two criteria, based on the pulse waveform and on the correlation between the signal in each segment and the signal in the two neighboring segments. Comparison of the photoplethysmographic-based automatic technique to sphygmomanometry, the reference standard, shows that the standard deviation of their differences was 3.7 mmHg. For subjects with systolic blood pressure above 130 mmHg the standard deviation was even lower, 2.9 mmHg. These values are much lower than the 8 mmHg value imposed by AAMI standard for automatic blood pressure meters. The photoplethysmographic-based technique for automatic measurement of systolic blood pressure, and the algorithm which was presented in this study, seems to be accurate.
Full Text Available This paper examines the role of Automatic Fiscal Stabilizers (AFS for stabilizing the cyclical fluctuations of macroeconomic output as an alternative to discretionary fiscal policy, admitting its huge potential of being an anti crisis solution. The objectives of the study are the identification of the general features of the concept of automatic fiscal stabilizers and the logical assessment of them from economic perspectives. Based on the literature in the field, this paper points out the disadvantages of fiscal discretionary policy and argue the need of using Automatic Fiscal Stabilizers in order to provide a faster decision making process, shielded from political interference, and reduced uncertainty for households and business environment. The paper conclude about the need of using fiscal policy for smoothing the economic cycle, but in a way which includes among its features transparency, responsibility and clear operating mechanisms. Based on the research results the present paper assumes that pro-cyclicality reduces de effectiveness of the Automatic Fiscal Stabilizer and as a result concludes that it is very important to avoid the pro-cyclicality in fiscal rule design. Moreover, by committing in advance to specific fiscal policy action contingent on economic developments, uncertainty about the fiscal policy framework during a recession should be reduced. Being based on logical analysis and not focused on empirical, contextualized one, the paper presents some features of AFS operating mechanism and also identifies and systematizes the factors which provide its importance and national individuality. Reaching common understanding on the Automatic Fiscal Stabilizer concept as a institutional device for smoothing the gap of the economic cycles across different countries, particularly for the European Union Member States, will facilitate efforts to coordinate fiscal policy responses during a crisis, especially in the context of the fiscal
Andreasen, Jan Lasson; De Chiffre, Leonardo
A laboratory system for fully automatic elaboration of chip breaking diagrams has been developed and tested. The system is based on automatic chip breaking detection by frequency analysis of cutting forces in connection with programming of a CNC-lathe to scan different feeds, speeds and cutting...... depths. An evaluation of the system based on a total of 1671 experiments has shown that unfavourable snarled chips can be detected with 98% certainty which indeed makes the system a valuable tool in chip breakability tests. Using the system, chip breaking diagrams can be elaborated with a previously...
Guo, Xichao; Wang, Cheng; Wen, Chenglu; Cheng, Ming
In order to perform high precise calibration of camera in complex background, a novel design of planar composite target and the corresponding automatic extraction algorithm are presented. Unlike other commonly used target designs, the proposed target contains the information of feature point coordinate and feature point serial number simultaneously. Then based on the original target, templates are prepared by three geometric transformations and used as the input of template matching based on shape context. Finally, parity check and region growing methods are used to extract the target as final result. The experimental results show that the proposed method for automatic extraction and recognition of the proposed target is effective, accurate and reliable.
Gupta, Ashutosh; Gupta, Shipra
The paper is proposed with an aim of power conservation. In this era of development, it is essential to develop a streetlight that turns on and off automatically without human interference. To achieve this light sensor have been placed in each panel which turns the street light on and off automatically. For energy conservation cool-white LED’s have been used in street light panel and dimmer modules have been installed which changes the intensity of the streetlight depending on the darkness.
Ullmann, Thomas Daniel; Wild, Fridolin; Scott, Peter
This paper reports on the descriptive results of an experiment comparing automatically detected reﬂective and not-reﬂective texts against human judgements. Based on the theory of reﬂective writing assessment and their operationalisation ﬁve elements of reﬂection were deﬁned. For each element of reﬂection a set of indicators was developed, which automatically annotate texts regarding reﬂection based on the parameterisation with authoritative texts. Using a large blog corpus 149 texts were retr...
Adjidé, V; Fournier, P; Vassault, A
The maintenance of automatic analysers and associated documentation taking part in the requirements of the ISO 15189 Standard and the French regulation as well have to be defined in the laboratory policy. The management of the periodic maintenance and documentation shall be implemented and fulfilled. The organisation of corrective maintenance has to be managed to avoid interruption of the task of the laboratory. The different recommendations concern the identification of materials including automatic analysers, the environmental conditions to take into account, the documentation provided by the manufacturer and documents prepared by the laboratory including procedures for maintenance.
Full Text Available An automatic gear sorting system based on monocular vision is proposed in this paper. A CCD camera fixed on the top of the sorting system is used to obtain the images of the gears on the conveyor belt. The gears׳ features including number of holes, number of teeth and color are extracted, which is used to categorize the gears. Photoelectric sensors are used to locate the gears׳ position and produce the trigger signals for pneumatic cylinders. The automatic gear sorting is achieved by using pneumatic actuators to push different gears into their corresponding storage boxes. The experimental results verify the validity and reliability of the proposed method and system.
Korolyuk, I.P.; Gorodenko, A.N.; Gorodenko, S.I.
A program ''CRITEST'' in the language PL/1 for the EC computer intended for automatic processing of the results of radioimmunological research has been elaborated. The program works in the operation system of the OC EC computer and is performed in the section OC 60 kb. When compiling the program Eitken's modified algorithm was used. The program was clinically approved when determining a number of hormones: CTH, T 4 , T 3 , TSH. The automatic processing of the radioimmunological research data on the computer makes it possible to simplify the labour-consuming analysis and to raise its accuracy
Hibi, Osamu [Aichi Rapid Transit Co., Aichi Prefecture (Japan). Engineering Dept.
Tobu-Kyuryo-Line in Nagoya (Japan) is a mid-size automatically operated passenger line which adopts the HSST (high-speed surface transport) system. The vehicles are levitated with normal conducting electromagnets and propelled by a linear induction motor. Low noise by levitation and stable acceleration by the linear induction motor improve the riding comfort and ensure a faster transportation. Automatic operation is indispensable for stable operation and reduction of running costs. In the opening year, the Tobu-Kyuryo-Line played an important role as an access to EXPO2005 by carrying 20 million passengers. So far it had no serious trouble and has been operated safely. (orig.)
Capet, Philippe; Delavallade, Thomas; Nakamura, Takuya; Sandor, Agnes; Tarsitano, Cedric; Voyatzi, Stavroula
In this article we describe the joint effort of experts in linguistics, information extraction and risk assessment to integrate EventSpotter, an automatic event extraction engine, into ADAC, an automated early warning system. By detecting as early as possible weak signals of emerging risks ADAC provides a dynamic synthetic picture of situations involving risk. The ADAC system calculates risk on the basis of fuzzy logic rules operated on a template graph whose leaves are event types. EventSpotter is based on a general purpose natural language dependency parser, XIP, enhanced with domain-specific lexical resources (Lexicon-Grammar). Its role is to automatically feed the leaves with input data.
Arroyo Rubio, Fernando
This project consists on developing an automatic night driving system in a simulation environment. The simulator I have used is TORCS. TORCS is an Open Source car racing simulator written in C++. It is used as an ordinary car racing game, as a IA racing game and as a research platform. The goal of this thesis is to implement an automatic driving system to control the car under night conditions using computer vision. A camera is implemented inside the vehicle and it will detect the reflective ...
Feldthaus, Asger; Møller, Anders
Morey, Rajendra A.; Mitchell, Teresa V.; Inan, Seniha; Lieberman, Jeffrey A.; Belger, Aysenil
Individuals with schizophrenia demonstrate impairments in selective attention and sensory processing. The authors assessed differences in brain function between 26 participants with schizophrenia and 17 comparison subjects engaged in automatic (unattended) and controlled (attended) auditory information processing using event-related functional MRI. Lower regional neural activation during automatic auditory processing in the schizophrenia group was not confined to just the temporal lobe, but also extended to prefrontal regions. Controlled auditory processing was associated with a distributed frontotemporal and subcortical dysfunction. Differences in activation between these two modes of auditory information processing were more pronounced in the comparison group than in the patient group. PMID:19196926
and Member, R.G., ‘‘Path Planning For Machine Vision Assisted, Teleoperated Pavement Crack Sealer,’’ Journal of Transportation Engineering 124:137...TECHN ICAL ART IC LE Automatic Optical Crack Tracking for Double Cantilever Beam Specimens B. Krull1,2, J. Patrick2,3, K. Hart2,4, S. White2,4, and N...accepted: January 31, 2015 doi:10.1111/ext.12148 Abstract An automatic crack tracking scheme is developed for measuring the tensile opening (mode I
Güler, A. Murat; Altınok, Özgür
The impressive improvements in scanning technology and methods let nuclear emulsion to be used as a target in recent large experiments. We report the performance of an automatic scanning microscope for nuclear emulsion experiments. After successful calibration and alignment of the system, we have reached 99% tracking efficiency for the minimum ionizing tracks that penetrating through the emulsions films. The automatic scanning system is successfully used for the scanning of emulsion films in the OPERA experiment and plan to use for the next generation of nuclear emulsion experiments.
Li, Yushuang; Chen, Libing; Men, Tao; Yang, Qingfeng; Li, Ning; Nie, Tao
The power amplifier is an important part of the high power digital transceiver module, because of its great demand and diverse measurement indicators, an automatic test system is designed to meet the production requirements of the power amplifiers as the manual test cannot meet the demand of consistency. This paper puts forward the plan of the automatic test system based on LXI bus technology, introduces the hardware and software architecture of the system. The test system has been used for debugging and testing the power amplifiers stably and efficiently, which greatly saves work force and effectively improves productivity.
Ding, Fei; Jiang, Huaiguang; Tan, Jin
This paper proposes an event-driven approach for reconfiguring distribution systems automatically. Specifically, an optimal synchrophasor sensor placement (OSSP) is used to reduce the number of synchrophasor sensors while keeping the whole system observable. Then, a wavelet-based event detection and location approach is used to detect and locate the event, which performs as a trigger for network reconfiguration. With the detected information, the system is then reconfigured using the hierarchical decentralized approach to seek for the new optimal topology. In this manner, whenever an event happens the distribution network can be reconfigured automatically based on the real-time information that is observable and detectable.
Radicella Andrea Chiaramonte
Full Text Available After having described gear wheels with teeth having the two sides constituted by different involutes and their importance in engineering applications, we stress the need for an efficient procedure for the automatic mesh generation of innovative gear teeth. First, we describe the procedure for the subdivision of the tooth profile in the various possible cases, then we show the method for creating the subdivision mesh, defined by two series of curves called meridians and parallels. Finally, we describe how the above procedure for automatic mesh generation is able to solve specific cases that may arise when dealing with teeth having the two sides constituted by different involutes.
Full Text Available An automatic multilevel image segmentation method based on sup-star fuzzy reasoning (SSFR is presented. Using the well-known sup-star fuzzy reasoning technique, the proposed algorithm combines the global statistical information implied in the histogram with the local information represented by the fuzzy sets of gray-levels, and aggregates all the gray-levels into several classes characterized by the local maximum values of the histogram. The presented method has the merits of determining the number of the segmentation classes automatically, and avoiding to calculating thresholds of segmentation. Emulating and real image segmentation experiments demonstrate that the SSFR is effective.
A computer program for automatic analysis of gamma-ray spectra obtained with a Ge(Li) detector is presented. The program includes a method by comparing the successive values of experimental data for the automatic peak finding and method of leastsquares for the peak fitting. The peak shape in the fitting routine is a 'modified Gaussian', which consists of two different Gaussians with the same height joined at the centroid. A quadratic form is chosen as a function representing the background. A maximum of four peaks can be treated in the fitting routine by the program. Some improvements in question are described. (auth.)
Rettmann, M. E.; Holmes, D. R., III; Camp, J. J.; Packer, D. L.; Robb, R. A.
Catheter ablation therapy has become increasingly popular for the treatment of left atrial fibrillation. The effect of this treatment on left atrial morphology, however, has not yet been completely quantified. Initial studies have indicated a decrease in left atrial size with a concomitant decrease in pulmonary vein diameter. In order to effectively study if catheter based therapies affect left atrial geometry, robust segmentations with minimal user interaction are required. In this work, we validate a method to semi-automatically segment the left atrium from computed-tomography scans. The first step of the technique utilizes seeded region growing to extract the entire blood pool including the four chambers of the heart, the pulmonary veins, aorta, superior vena cava, inferior vena cava, and other surrounding structures. Next, the left atrium and pulmonary veins are separated from the rest of the blood pool using an algorithm that searches for thin connections between user defined points in the volumetric data or on a surface rendering. Finally, pulmonary veins are separated from the left atrium using a three dimensional tracing tool. A single user segmented three datasets three times using both the semi-automatic technique as well as manual tracing. The user interaction time for the semi-automatic technique was approximately forty-five minutes per dataset and the manual tracing required between four and eight hours per dataset depending on the number of slices. A truth model was generated using a simple voting scheme on the repeated manual segmentations. A second user segmented each of the nine datasets using the semi-automatic technique only. Several metrics were computed to assess the agreement between the semi-automatic technique and the truth model including percent differences in left atrial volume, DICE overlap, and mean distance between the boundaries of the segmented left atria. Overall, the semi-automatic approach was demonstrated to be repeatable within
Full Text Available Functions and conditions of work of suction ATF filters are presented. Requirements ofATF filters are discussed. Sources of contaminations ATF are presented. ATF filtration system wascharacterized. Classification of ATF filters and their selection of design solutions are presented. Filtermaterials used for the production of ATF suction filters are presented and characterized. Conditions ofthe work of suction ATF filters were analyzed. Hydraulic and filtration characteristics are discussed.[b]Keywords: AT[/b] — automatic transmissions, ATF — automatic transmission fluid, ATF filter
Mangado Lopez, Nerea; Ceresa, Mario; Duchateau, Nicolas
's CT image, an accurate model of the patient-specific cochlea anatomy is obtained. An algorithm based on the parallel transport frame is employed to perform the virtual insertion of the cochlear implant. Our automatic framework also incorporates the surrounding bone and nerve fibers and assigns....... To address such a challenge, we propose an automatic framework for the generation of patient-specific meshes for finite element modeling of the implanted cochlea. First, a statistical shape model is constructed from high-resolution anatomical μCT images. Then, by fitting the statistical model to a patient...
P. D. Drobintsev
Full Text Available This paper presents an overview of technology of the automated generation of test scenarios based on guides. The usage of this technology can significantly improve the quality of the developed program products. In order to ground the technology creation, the main problems that occur during the development and testing of the large industrial systems, are described, as well as the methodologies of software verification on conformity to product requirements. The potentialities of tools for automatic and semi-automatic generation of a test suite by using a formal model in UCM notation are demonstrated, as well as tools for verification and automation of testing.
Ukhanova, Ann; Støttrup-Andersen, Jesper; Forchhammer, Søren
Definition of video quality requirements for video surveillance poses new questions in the area of quality assessment. This paper presents a quality assessment experiment for an automatic license plate recognition scenario. We explore the influence of the compression by H.264/AVC and H.265/HEVC...... standards on the recognition performance. We compare logarithmic and logistic functions for quality modeling. Our results show that a logistic function can better describe the dependence of recognition performance on the quality for both compression standards. We observe that automatic license plate...
Neutron diffractometry contributes substantially to studies of the structure of materials. Scientists at Harwell were among the first to make the collection of diffractometer data automatic and have continued to contribute to this field. This paper outlines the development of automatic neutron diffractometers at Harwell from 1960, and considers the various ANDROMACHE systems up to a hierarchical computer system that is anticipated for 1979. Appendices provide examples of the documentation provided for users of the ANDROMACHE Mark 6 neutron diffractometer system and give brief descriptions of the elements of the programs. (author)
Automatic parallelization of imperative sequential programs has focused on nests of for-loops. The most recent of them consist in finding an affine mapping with respect to the loop indices to simultaneously capture the temporal and spatial properties of the parallelized program. Such a mapping is usually called a open-quotes space-time transformation.close quotes This work describes an extension of these techniques to while-loops using speculative execution. We show that space-time transformations are a good framework for summing up previous restructuration techniques of while-loop, such as pipelining. Moreover, we show that these transformations can be derived and applied automatically