Albanian thikë 'knife'

Directory of Open Access Journals (Sweden)

Eric P. Hamp

1993-12-01

Full Text Available In the volume of essays Languages and Areas: Studies presented to George V. Bobrinskoy (Chicago 1967 66--9, I struggled to find cognates and an Inda-European background for the obviously inherited Albanian thike, which is the ordinary word for a knife. I was exploring, without finding anything anything conclusive, the possibili­ ties of Indo-Iranian. It seemed to me then, and it still does, that lndo-Iranian assures us of an etymon *kika. 'sand, ravel'; I preferred then, in consideration of śitá- = Lat. catus etc., to trace this to *kǝ-kā., a zero-grade of*kō- (= *k'eH -, rather than to *ki-kā. I further discussed the problems and limitations of the Albanian vocalism and of a suffix in -k-.

Historical context of the Albanian Constitutional Court

Directory of Open Access Journals (Sweden)

Ravesa Nano

2016-11-01

Full Text Available The Albanian legal tradition is based mostly on the traditional and customary laws. The Ottoman Empire ruled Albania for nearly five centuries and applied some of its translation of Sharia law together with its own rules and procedures. However, the Albanian population, especially in the north was governed by its own customary laws that were included in the Kanun of Lek Dukagjini. For a long period of time, these customary laws were unwritten and were learned generation aft er generation. The Kanun of Lek Dukagjini had very few rules and procedures regarding penal law. They were not arranged properly and there were some repetition for different cases. The National Court was implemented by a popular gathering of the oldest man of the village called Pleqnia. It used to decide on issues immediately, and there was no review of their issues. The rules were clear, simple and strict. There are some ideas from different Albanian researchers that the communist system although exported as an idea from abroad, based its laws and rules very much on the Albanian tradition as for example the creation also People’s Court. There was no institution of judicial review. These researchers point out that it was for this reason that the communist system in Albania lasted for nearly fifty years.

GENERATIVE WORDS OF ALBANIAN AND ENGLISH SENTENCE

OpenAIRE

Shkelqim Millaku

2017-01-01

This studies or the aim of the research is to deals the generative “morphems, words or “simple or compound[1]” sentence. The full congrast of Albanian and English language in this phenomena of generative is in morphology and in syntactic structure. This accepts of studies will comparted, contrasted and generated between two languages. This studies deals with noun (noun phrase), verb (verb phrase) of syntactic structure between Albanian and English language. In both of languages, most linguis...

SUBTLEX- AL: Albanian word frequencies based on film subtitles

Directory of Open Access Journals (Sweden)

Dr.Sc. Rrezarta Avdyli

2013-06-01

Full Text Available Recently several studies have shown that word frequency estimation based on subtitle files explains better the variance in word recognition performance than traditional words frequency estimates did. The present study aims to show this frequency estimate in Albanian from more than 2M words coming from film subtitles. Our results show high correlation between the RT from a LD study (120 stimuli and the SUBTLEX- AL, as well as, high correlation between this and the unique existing frequency list of a hundred more frequent Albanian words. These findings suggest that SUBTLEX-AL it is good frequency estimation, furthermore, this is the first database of frequency estimation in Albanian larger than 100 words.

Earnings Management: Obvious Phenomenon in Albanian Market

Directory of Open Access Journals (Sweden)

Teuta Llukani

2013-07-01

This paper is focused on reviewing the existing literature with regard to the Earnings Management in response to the growing pressure of investors, policy makers, and companies’ governance reform mechanisms to curb opportunistic behavior of the managers of these companies. It also examines the existence of this phenomenon in Albanian context as well as tests the importance of Modified Jones Model as an efficient tool for detection of abnormal accruals, used as a proxy for earnings management. The results show that firms in the Albanian market are engaged in earnings management initiatives.

The incomplete trajectory of Albanian migration in Greece

OpenAIRE

GEMI, Eda

2015-01-01

Proceedings from the conference "Governing Irregular Migration : States, Actors and Intermediaries", Athens 8-9 July 2015 The study addresses the irregular migration of Albanians to Greece. In particular, it analyses the key findings of the fieldwork with 87 Albanian migrants, the dynamic of irregular migration from Albania to Greece, the factors and the actors who affect them as well as the success or failure of the relevant migration policies. The report shows that the expanding possibil...

Application of nuclear analysis techniques in ancient chinese porcelain

International Nuclear Information System (INIS)

Feng Songlin; Xu Qing; Feng Xiangqian; Lei Yong; Cheng Lin; Wang Yanqing

2005-01-01

Ancient ceramic was fired with porcelain clay. It contains various provenance information and age characteristic. It is the scientific foundation of studying Chinese porcelain to analyze and research the ancient ceramic with modern analysis methods. According to the property of nuclear analysis technique, its function and application are discussed. (authors)

Albanian-NATO Relations in the Fight Against International Terrorism

Science.gov (United States)

2012-12-01

the government built 350,000 fortified concrete elements—bunkers—that were planted all over the country. (As a result, Albanians faced severe housing...Security Agenda, 97. 63 Ethnic Albanians live in Greece, Kosovo, Macedonia, Montenegro and Serbia. 25 would achieve neither goal—nor would irredentist...operations. The success of the initiative led to its enlargement in 2008 with Bosnia and Herzegovina and Montenegro . 6. Southeastern Europe Defense

Considerations on Albanian Life Insurance Market

Directory of Open Access Journals (Sweden)

Gentiana Sharku

2011-03-01

Full Text Available The life insurance sector is an important sector of the economy all over the world. Life insurance provides the economy and the individuals as well, a variety of fundamental financial services.Regardless the importance it has all around the world, life insurance market in Albania is still underdeveloped comparing not only to the Western European countries, but to the region countries as well. The comparative analysis of insurance market is carried out by means of two indexes: insurance density and penetration index. The life insurance market in Albania is facing several problems which will be further explained in the paper, together with some recommendations to be taken in account by Albanian insurance companies and the Albanian government as well.

Barriers Inhibiting Albanian Tourism from Being Competitive: A Delphi Study

Directory of Open Access Journals (Sweden)

Mariett a Poshi

2017-07-01

Full Text Available Albanian tourism is a major income contributor to the country’s employment and economy. The industry is relatively new to the country and only recently has it been able to receive the attention it needs in regards to making it more appealing to tourists and everyone involved in it. The lack of inexperience as compared to countries in the region is very apparent especially by comparison of visitors per capita on Albania with the other destinations in the region. Research on various factors that might inhibit Albanian tourism have been conducted and while they display what the problems might be, they lack to suggest implementing strategies. A qualitative Delphi was used in this research study, which included a purposeful sample of SMEs in the field of Albanian tourism. The panel of experts were drawn from three groups: (a government officials, (b industry leaders, and (c academics. The data were collected and analyzed from three rounds of questionnaires. The study found 10 factors inhibiting Albanian tourism from being competitive in the region. SMEs suggested 6 short-term and 4 long-term actions needed to be taken by Albanian tourism in order to increase its competitiveness in the Mediterranean. Recommendations for academia, government, and industry included the need for more research in the field, regulation of industry taxes and fighting of corruption, investment of infrastructure, professional training and developed, and creation on independent professional organizations.

Kosovo education development in Albanian language during the years 1878- 1918

Directory of Open Access Journals (Sweden)

Fahredin Shabani

2017-11-01

Full Text Available Albania has one of the most specific histories, among all European Nations. Albanians have found themselves under the pressure of different wars for centuries, but it did not prevent them to create a rich tradition, in all aspects of life, especially in culture and education. During the National Renaissance, patriots and pedagogues considered education and culture as important factors for the nation's progress, but also as a means for its unity and the preservation of national unity in the struggle under the constant efforts of neighbouring chauvinists to disintegrate it. After the partially – realized aspirations for a free and independent Albania, only two paths were left for Albania in London Conference of 1913: continuation of the armed struggle and cultivation of the Albanian language at schools, which would undoubtedly lead to the rise of national conscience, under the idea that"... the light of the knowledge will take us ahead ...". It was the lack of a common alphabet. For this reason, on the initiative of the Manastiri Club, the Congress of Manastiri was convened, which opened new paths. In Kosovo, the challenges of learning the Albanian language and the continuation of resistance during the years 1878-1912 were oriented towards the preservation of their being and national identity; the pursuit of liberation efforts and the path towards independence and national unity. The fates of school, education and Albanian language in Kosovo during 1912-1915 changed dramatically. The state of education in Albania, in the areas administered by Austro Hungarians was much better compared to the occupied Bulgarian areas. Meanwhile, during 1918, the Albanian book was the privilege of only those who went to school across the Kingdom of SCS (SKS. At that time, all measures were taken so that no Albanian book could penetrate this land. Pashiq's agents were engaged for this issue and they considered the ABC book as something that “Kept the gunpowder

Albanian migration during the post communist transition and the European integration in global era - An intercultural reflection

Directory of Open Access Journals (Sweden)

Agim Leka

2013-07-01

The religion identity of Albanian is not any essential structural component of their identity. The religion of Albanians as a part of their culture. This tendency of European society is an integrating space for Albanians. So unlike all Muslims of other countries, Albanian Muslims are integrated quickly and easily to the European secularist environment.

THE FUNCTION OF SIMPLE SENTENCE BETWEEN ALBANIAN AND ENGLISH

OpenAIRE

Shkelqim Millaku

2017-01-01

In Albanian and English we have same kind of sentences (simple, compound or complex sentence). The major of elements or constituents that can be found in clauses are subject, predicate, object, complement etc. For Albanian and English most linguists agree on the needs to recognize at least the following word classes: noun, verb, adjective, preposition, adverb, determinative and conjunction. Each of these words classes is illustrated in the sentence below. The noun or noun phrase can be subjec...

THE CONTRAST AND THE FUNCTION OF THE GENDER ALBANIAN TO ENGLISH LANGUAGE

OpenAIRE

Shkelqim Millaku; Xhevahire Topanica

2017-01-01

In Albanian and English language we have three kinds of gender: masculine, feminine and neuter. In Albanian language the concept for gender, is: “Gjinia është një nga kategoritë gramatikore më karakteristikë për emrat në gjuhën shqipe. Nga natyra e saj, ajo dallohet nga kategoritë e tjera të emrit, nga numri, rasa dhe nga kategoritë e shquarsisë dhe të pashquarsisë, sepse i kundërvihet mashkullore-femërore dhe asnjanëse...”[1]. This Albanian citation is possible to be the similary and within...

On Collecting and Publishing the Albanian Oral Epic

Directory of Open Access Journals (Sweden)

Arbnora Dushi

2014-05-01

Full Text Available The aim of this paper is to examine how the Albanian epic known as the ‘Cycle of the Frontier Warriors’ has been presented in Albanian folklore collections. I will examine seven written versions of the song ‘The Wedding of Ali Bajraktari’, which belongs to this epic cycle. The ‘Cycle of the Frontier Warriors’, has been an object of collection since the beginning of the twentieth century. There are now dozens of volumes published, but the studies published to date concentrate on historical, thematic and comparative rather than contextual and textual issues.

Comparison of a portable micro-X-ray fluorescence spectrometry with inductively coupled plasma atomic emission spectrometry for the ancient ceramics analysis

International Nuclear Information System (INIS)

Papadopoulou, D.N.; Zachariadis, G.A.; Anthemidis, A.N.; Tsirliganis, N.C.; Stratis, J.A.

2004-01-01

Two multielement instrumental methods of analysis, micro X-ray fluorescence spectrometry (micro-XRF) and inductively coupled plasma atomic emission spectrometry (ICP-AES) were applied for the analysis of 7th and 5th century B.C. ancient ceramic sherds in order to evaluate the above two methods and to assess the potential to use the current compact and portable micro-XRF instrument for the in situ analysis of ancient ceramics. The distinguishing factor of interest is that micro-XRF spectrometry offers the possibility of a nondestructive analysis, an aspect of primary importance in the compositional analysis of cultural objects. Micro-XRF measurements were performed firstly directly on the ceramic sherds with no special pretreatment apart from surface cleaning (micro-XRF on sherds) and secondly on pressed pellet disks which were prepared for each ceramic sherd (micro-XRF on pellet). For the ICP-AES determination of elements, test solutions were prepared by the application of a microwave-assisted decomposition procedure in closed high-pressure PFA vessels. Also, the standard reference material SARM 69 was used for the efficiency calibration of the micro-XRF instrument and was analysed by both methods. In order to verify the calibration, the standard reference materials NCS DC 73332 and SRM620 as well as the reference materials AWI-1 and PRI-1 were analysed by micro-XRF. Elemental concentrations determined by the three analytical procedures (ICP-AES, micro-XRF on sherds and micro-XRF on pellets) were statistically treated by correlation analysis and Student's t-test (at the 95% confidence level)

Comparison of a portable micro-X-ray fluorescence spectrometry with inductively coupled plasma atomic emission spectrometry for the ancient ceramics analysis

Energy Technology Data Exchange (ETDEWEB)

Papadopoulou, D.N. [Laboratory of Analytical Chemistry, Faculty of Chemistry, Aristotle University, GR-54124, Thessaloniki (Greece); Zachariadis, G.A. [Laboratory of Analytical Chemistry, Faculty of Chemistry, Aristotle University, GR-54124, Thessaloniki (Greece); Anthemidis, A.N. [Laboratory of Analytical Chemistry, Faculty of Chemistry, Aristotle University, GR-54124, Thessaloniki (Greece); Tsirliganis, N.C. [Archaeometry Laboratory, Cultural and Educational Technology Institute, Tsimiski 58, GR-67100, Xanthi (Greece); Stratis, J.A. [Laboratory of Analytical Chemistry, Faculty of Chemistry, Aristotle University, GR-54124, Thessaloniki (Greece)]. E-mail: jstratis@chem.auth.gr

2004-12-01

Two multielement instrumental methods of analysis, micro X-ray fluorescence spectrometry (micro-XRF) and inductively coupled plasma atomic emission spectrometry (ICP-AES) were applied for the analysis of 7th and 5th century B.C. ancient ceramic sherds in order to evaluate the above two methods and to assess the potential to use the current compact and portable micro-XRF instrument for the in situ analysis of ancient ceramics. The distinguishing factor of interest is that micro-XRF spectrometry offers the possibility of a nondestructive analysis, an aspect of primary importance in the compositional analysis of cultural objects. Micro-XRF measurements were performed firstly directly on the ceramic sherds with no special pretreatment apart from surface cleaning (micro-XRF on sherds) and secondly on pressed pellet disks which were prepared for each ceramic sherd (micro-XRF on pellet). For the ICP-AES determination of elements, test solutions were prepared by the application of a microwave-assisted decomposition procedure in closed high-pressure PFA vessels. Also, the standard reference material SARM 69 was used for the efficiency calibration of the micro-XRF instrument and was analysed by both methods. In order to verify the calibration, the standard reference materials NCS DC 73332 and SRM620 as well as the reference materials AWI-1 and PRI-1 were analysed by micro-XRF. Elemental concentrations determined by the three analytical procedures (ICP-AES, micro-XRF on sherds and micro-XRF on pellets) were statistically treated by correlation analysis and Student's t-test (at the 95% confidence level)

Erotic, Sexual Words and Meanings in Shakespeare’s “Romeo and Juliet” in Albanian translation

Directory of Open Access Journals (Sweden)

Fatmir Ramadani

2017-07-01

Full Text Available The Albanian reading public had to wait for three hundred years to be introduced to the works of one of the greatest writers of English literature, William Shakespeare, in their mother tongue. The translation of Shakespeare’s works into Albanian started in the second decade of the 20th century. We distinguish three periods of the Albanian translation of Shakespeare’s plays. The first phase, from 1915 to 1928, is known for the translation of Bishop Fan Noli, the head of Albanian Autocephalous Orthodox Church in Boston, USA. The second phase from 1955 until 1982, during the totalitarian regime world literature was strictly censored by communist propaganda, with only three official translators of Shakespeare’s works, Skënder Luarasi, Vedat Kokona, and Alqi Kristo. Third period, from 1990 to the present, with an increasing number of translators of Shakespeare’s works, such as Refik Kadija, Perikli Jorgoni, Qezar Kurti, Mihal Hanxhari, Napolon Tasi, Pashko Gjeçi, Kristaq Traja etc. William Shakespeare has made frequent use of erotic and sexual words, meanings and connotations in his tragedy Romeo and Juliet. Most of them are missing in the first Albanian translation. But the second translator has noted all of them in the footnotes of his translation. In this paper I will focus on these sexual and erotic words and references in the “Romeo and Juliet” and their translation in Albanian language by two translators, the first translation of Alqi Kristo some 70 years ago, and the second translation by Refik Kadija in 2014. Political influences, evolution of Albanian language over the last decades, are some of the main reasons to suggest that Refik Kadija’s translation should be used as more complete and better translation of Shakespeare’s tragedy in Albanian language.

Language Policy, Ethnic Conflict, and Conflict Resolution: Albanian in the Former Yugoslavia

Science.gov (United States)

Duncan, Daniel

2016-01-01

The 1990s disintegration of Yugoslavia was marked by vicious ethnic conflict in several parts of the region. In this paper, I consider the role of policy towards the Albanian language in promoting and perpetuating conflict. I take three case studies from the former Yugoslavia in which conflict between ethnic Albanians and the dominant group…

The anti-Yugoslavian Propaganda in the Albanian Press during Communism

Directory of Open Access Journals (Sweden)

Marsel Nilaj

2016-11-01

Full Text Available The beginning of the 50-s, found Albania separated from its closet communist ally for almost a decade, Yugoslavia. The ideological separation had now been completed in between Enver Hoxha and Marshal Tito. Hence, the Albanian communism saw Yugoslavia as the active enemy against the Albanian state. This period involved Albania even more into the popular democratic camp, where together with a lot other countries, were the satellite states of URSS. However, the Albanian state was considered as the weakest satellite of URSS, and since that time the enclave satellite. One of the most used elements to "fi ght" Yugoslavia, was creating propaganda against and the best and almost the only way to do this, was through the local press of that time. The fact of having a considerable number of local newspapers, was greatly exploited. This propaganda, instead of being used to fight Yugoslavia, was rather used to keep Albanians away from even thinking about Yugoslavia but at the same time, it was clearly visible that Albania would be doctrinal, up to naivety. Analyses of the press of the time, lead researchers to the idea that the regime of that period, was willingly entering itself into internationalism, and was trying to avoid any national or western element. Such a severe propaganda against Yugoslavia, had also an international impact, due to the positions held towards Albania.

Film Advertising in the Albanian Press before World War II

OpenAIRE

Vjollca Hysi Panajoti; Mirdaim Axhami; Loreta Zela Axhami

2015-01-01

This paper aims at studying the development of film advertising in the 1930’s Albanian press. Through advertising we struggle to read a piece of the Albanian monarchy’s history. Considering advertising as a historical source tends to reflect the economic, social and cultural life of the country. The study focused on the features, characteristics and uniqueness of advertising the films in relation to other ads present in print. Who were the people who created the ads, how does the ...

Film Advertising in the Albanian Press before World War II

Directory of Open Access Journals (Sweden)

Vjollca Hysi Panajoti

2015-05-01

Full Text Available This paper aims at studying the development of film advertising in the 1930’s Albanian press. Through advertising we struggle to read a piece of the Albanian monarchy’s history. Considering advertising as a historical source tends to reflect the economic, social and cultural life of the country. The study focused on the features, characteristics and uniqueness of advertising the films in relation to other ads present in print. Who were the people who created the ads, how does the Albanian press film advertising compare to advertising in the foreign press and what were the difficulties facing advertising at this time, are the other important issues addressed in this study. Over a century has passed since Harper's Weekly wrote that 'advertisements are a reflection of real life, a kind of fossil by which chroniclers can rewrite history in order to complete the graphic, even if all other historical evidence may have disappeared.

Migrations of ethnic Albanians in Kosovo 1938-1950

Directory of Open Access Journals (Sweden)

Bjelajac Mile

2007-01-01

Full Text Available The Kosovo crisis and the dissolution of the SFR of Yugoslavia provoked the scholarly community to respond in many and varied ways. This paper seeks to show how difficult it was for many to 'navigate' between the 'rocks' of hard fact and pure propaganda, and in what ways that open-ended situation echoes in the present. A more important goal, however, is to put forward the results of my research regarding the reliability of the Yugoslav census data of 1931 which may shed clarifying light on the vastly discrepant demographic figures that are currently in use. The 1931 census data for non-Slav minorities were highly classified and intended only for internal government use in response to the needs of external defense or internal order. Migrations of the ethnic Albanians and other ethnic groups in the Kosovo region during the first half of the twentieth century led to significant shifts in ethnic proportions. It is almost impossible to form a clear fact-based picture of what had happened during the First World War and why the Orthodox Christian Serbian population dropped to 21.1% in 1921, almost twice as low as their number in 1911. On the other hand, it is debatable how many ethnic Albanians or Turks permanently emigrated or went in exile in 1918-21. According to various Yugoslav data sources, some 65,000 settlers and state officials came to Kosovo, while some 24,000 Muslims from all parts of Yugoslavia emigrated to Turkey or Albania. The Second World War brought about another significant population shift. Some 10,000 Serbs were killed in 1941, while almost all Christian Orthodox settler families (about 60,000 people were expelled. The expulsion was followed by an inflow of Albanians from Albania proper. Only two thirds of the expelled were permitted to return after 1945. The provisional Yugoslav census of 1948 registered a significant increase for Albanians and a decrease for Serbs and Montenegrins or, expressed in percentage terms, Serbs dropped

Transforming the Albanian Armed Forces, Overcoming the Challenges

National Research Council Canada - National Science Library

Cahani, Nazmi

2009-01-01

The Albanian Armed Forces (AAF) are currently undergoing an extensive defense reform process that consists of transformation of its strategic concept, doctrine, organizational structure, personnel management system, military...

Appendicectomies in Albanians in Greece: outcomes in a highly mobile immigrant patient population

Science.gov (United States)

2001-01-01

Background Albanian immigrants in Greece comprise a highly mobile population with unknown health care profile. We aimed to assess whether these immigrants were more or less likely to undergo laparotomy for suspected appendicitis with negative findings (negative appendicectomy), by performing a controlled study with individual (1:4) matching. We used data from 6 hospitals in the Greek prefecture of Epirus that is bordering Albania. Results Among a total of 2027 non-incidental appendicectomies for suspected appendicitis performed in 1994-1999, 30 patients with Albanian names were matched (for age, sex, time of operation and hospital) to 120 patients with Greek names. The odds for a negative appendicectomy were 3.4-fold higher (95% confidence interval [CI], 1.24-9.31, p = 0.02) in Albanian immigrants than in matched Greek-name subjects. The difference was most prominent in men (odds ratio 20.0, 95% CI, 1.41-285, p = 0.02) while it was not formally significant in women (odds ratio 1.56, 95% CI, 0.44-5.48). The odds for perforation were 1.25-fold higher in Albanian-name immigrants than in Greek-name patients (95% CI 0.44- 3.57). Conclusions Albanian immigrants in Greece are at high risk for negative appendicectomies. Socioeconomic, cultural and language parameters underlying health care inequalities in highly mobile immigrant populations need better study. PMID:11472640

The identity controversies about Albanians in Serbian historiography

Directory of Open Access Journals (Sweden)

Đorđević Radomir D.

2013-01-01

Full Text Available The period of our new historiography is mostly burdened by a political discourse of a new establishment, with which the so called period of "brotherhood and unity" began in the former Yugoslavia. In that period of time, but also after the fall of socialism in 1998, fascination with Yugoslavism is still present in the Serbian history. There are almost no textbooks or monographs in which a dogmatic way of thinking is critically reviewed as incomprehensible in our historical science. This is especially related to the problem of Albanian ethnogenesis and their presence in the Balkans. By adopting this imposed opinion that the Albanians are a native population, our historians directly made an immense damage to the Serbian people.

Alveolar and Velarized Laterals in Albanian and in the Viennese Dialect.

Science.gov (United States)

Moosmüller, Sylvia; Schmid, Carolin; Kasess, Christian H

2016-12-01

A comparison of alveolar and velarized lateral realizations in two language varieties, Albanian and the Viennese dialect, has been performed. Albanian distinguishes the two laterals phonemically, whereas in the Viennese dialect, the velarized lateral was introduced by language contact with Czech immigrants. A categorical distinction between the two lateral phonemes is fully maintained in Albanian. Results are not as straightforward in the Viennese dialect. Most prominently, female speakers, if at all, realize the velarized lateral in word-final position, thus indicating the application of a phonetically motivated process. The realization of the velarized lateral by male speakers, on the other hand, indicates that the velarized lateral replaced the former alveolar lateral phoneme. Alveolar laterals are either realized in perceptually salient positions, thus governed by an input-switch rule, or in front vowel contexts, thus subject to coarticulatory influences. Our results illustrate the subtle interplay of phonology, phonetics and sociolinguistics.

Medical ethnobotany of the Albanian Alps in Kosovo.

Science.gov (United States)

Mustafa, Behxhet; Hajdari, Avni; Krasniqi, Feriz; Hoxha, Esat; Ademi, Hatixhe; Quave, Cassandra L; Pieroni, Andrea

2012-01-28

Ethnobotanical studies are crucial in South-Eastern Europe for fostering local development and also for investigating the dynamics of Traditional Environmental Knowledge (TEK) related to plants in one of the most crucial European hotspots for biocultural diversity. The current medico-ethnobotanical survey was conducted in rural alpine communities in Kosovo. The aims of the study were twofold: 1) to document the state of TEK of medicinal plants in these communities; 2) to compare these findings with that of similar field studies previously conducted among local populations inhabiting the Montenegrin and Albanian side of the same Alpine range. Field research was conducted in 36 villages on the Kosovar side of the Albanian Alps. Snowball sampling techniques were used to recruit 91 elderly informants (≥ 50 years-old) for participation in semi-structured interviews and structured surveys regarding the use of the local flora for medicinal and food purposes. Standard ethnobotanical methods were employed and prior informed consent was obtained for all study participants. The uses of 98 plants species belonging to 39 families were recorded; the most quoted botanical families were Rosaceae, Asteraceae, and Lamiaceae. Mainly decoctions and infusions were quoted as folk medicinal preparations and the most common uses referred to gastrointestinal and respiratory disorders, as well as illnesses of the uro-genital system. Among the most uncommon medicinal taxa quoted by the informants, Carduus nutans L., Echinops bannaticus Rochel ex Schrad., and Orlaya grandiflora Hoffm. may merit phytochemical and phytopharmacological investigations.Comparison of the data with other ethnobotanical field studies recently conducted on the Albanian and Montenegrin sides of the same Alps has shown a remarkable link between the medical ethnobotany of Montenegrin and Kosovar side of the Albanian Alps. Moreover, folk uses of the most quoted wild medicinal taxa recorded in Kosovo often include those

Typing of 111 ancestry informative markers in an Albanian population

DEFF Research Database (Denmark)

Ribeiro, Joana; Pereira, V.; Kondili, A.

2015-01-01

) with the purpose of differentiating Middle Eastern populations from those of the rest of the world (publication in preparation). Before these multiplexes can be applied in forensic case work, population data for these markers are needed.In this work, samples from 51 Albanian individuals were typed with the AIMs...... script in the software R.The results were compared to other population samples previously typed for the same markers. The panel of AIMs was capable of differentiating the Albanian population from other population groups except for the Greek population. These results were expected due to the history...

Obstetric performance of ethnic Kosovo Albanian asylum seekers in London: a case-control study.

Science.gov (United States)

Yoong, W; Wagley, A; Fong, C; Chukwuma, C; Nauta, M

2004-08-01

The most recent Confidential Enquiry into Maternal Deaths expressed concern that mortality in women from non-English-speaking ethnic groups was twice that of native-born women. There are very few published data on the obstetric performance of Kosovo Albanian refugees who have relocated to the United Kingdom and the aim of this study was to compare the obstetric performances of Kosovo Albanian women currently residing in the United Kingdom with their British-born Caucasian counterparts. Sixty-one index and 61 control cases were analysed; 63% of the Kosovo Albanian women spoke little or no English and 50% were on income support. Of the study group, 9.8% had caesarean sections, 8.2% had instrumental vaginal deliveries and 82% achieved normal deliveries. The Kosovo Albanian women were statistically younger and had shorter duration of labour compared to controls (P labour (IOL), caesarean section, instrumental deliveries, premature delivery and low birth weight 0.05 in all cases, chi2 test) between the two groups. This is the first study to examine the obstetric outcomes of Kosovo Albanian women who have resettled in a western European country. Most Kosovo Albanian refugees living in the United Kingdom are not socio-economic migrants but displaced due to civil unrest and many had reasonable socio-economic status prior to resettlement. The similarity in obstetric and fetal outcomes between the study and control groups could be attributed to the 'healthy immigrant effect', where immigrant groups appear to have better outcomes due to family support and relatively lower intake of alcohol and nicotine. It also suggests that obstetricians may be heeding the recommendations from recent Confidential Enquiry into Maternal Deaths, which highlight the need for increased vigilance in women from ethnic minorities.

QXRD, XRF and optical microscopy applied to characterization and provenance of ancient ceramics from Haft Teppeh (1500 – 1150 BC), southwest Iran

International Nuclear Information System (INIS)

Emami, Mohammadamin

2012-01-01

Classifications of Archaeological discoveries are an essential feature for better interpretation of the extractive data from a case excavation. The question that will be focused on in this paper is; which of the parameters – raw materials or manufacturing processes – have changed during the time in an ancient archaeological place. The materials used in this research are ceramic pieces from archaeological excavations carried out in Haft-Tappeh, south-western Iran that chronologically belonging to the middle Elamite period (1500 B.C.). Samples classified firstly by their exterior characters. According to obtained results from quantitative X-ray diffraction and phase refining by Rietveld, it has become possible to characterize the data for clustering the samples in different groups. Observation by polarized light microscopy produced additional information about the manufacturing as well as the processing of the different admixtures used by ancient potters. Mineralogical- chemical interpretation of ceramics based on x-ray methods proved a dissimilar thermal behaviour due to different fabrication conditions during the same period. The results provided principally information on the existence of a common raw material reservoir but different manufacturing technique in pottering during middle Elamite period in Haft-Tappeh.

Warranties of Albanian criminal law for children protection from “pornography”

Directory of Open Access Journals (Sweden)

Marilda Menkshi

2016-11-01

Full Text Available This paper will focus on the Analysis of current Albanian Criminal Law regarding criminal acts of pornography. This paper will analyze Albanian Criminal Law, under the perspective of the Convention on the Rights of the Child, to reflect the alignment of criminal law with Convention, as a minimum guarantee to be provided by the States. Another element of this paper is the approach of criminal law in the context of the defence of children from pornography with judicial practice. In this way the effectiveness of Criminal Law, on prevention and protection of society, family and especially children, from pornography will be identified. This paper considers the judicial practice in other European countries, but also from the United States and other countries on other continents, as a source of the definition of pornography and its application. This analysis is conducted through the prism of Criminological and criminal policy, to identify the current state of the Albanian legislation to protect minors from pornography, challenges and its prospects, both in legislative and practical terms.

POLITICS OF ECONOMIC PRESSURE TO THE ALBANIAN POPULATION OF KOSOVO FROM THE SERBO-CROAT-SLOVENE KINGDOM DURING THE YEARS 1918-1929

OpenAIRE

Parim Kosova

2017-01-01

To remedy historic injustices against the Albanian borders and stop the violence and Serbian military repression against Kosovo Albanians, the delegates of Albania at the Paris Peace Conference of 1919-1920, demanded the revision of Albania's borders of 1913. They made efforts to include Kosovo and other Albanian territories within the Albanian state.[1] But even after the intense talks that took place in Paris and in its circumstances that resulted in the signing of the Peace Agreements in V...

A Cross-Cultural Study of Differences in Romantic Attitudes between American and Albanian College Students

Science.gov (United States)

Hoxha, Eneda; Hatala, Mark N.

2012-01-01

Cross-cultural differences in romantic attitudes are often taken for granted and accepted. However, very little research has been conducted to clearly state how much and how different Albanian and American college students are in the way they love. Results indicate that Americans are more romantic than Albanians. In addition, Americans are more…

Medical ethnobotany of the Albanian Alps in Kosovo

Directory of Open Access Journals (Sweden)

Mustafa Behxhet

2012-01-01

Full Text Available Abstract Background Ethnobotanical studies are crucial in South-Eastern Europe for fostering local development and also for investigating the dynamics of Traditional Environmental Knowledge (TEK related to plants in one of the most crucial European hotspots for biocultural diversity. The current medico-ethnobotanical survey was conducted in rural alpine communities in Kosovo. The aims of the study were twofold: 1 to document the state of TEK of medicinal plants in these communities; 2 to compare these findings with that of similar field studies previously conducted among local populations inhabiting the Montenegrin and Albanian side of the same Alpine range. Methods Field research was conducted in 36 villages on the Kosovar side of the Albanian Alps. Snowball sampling techniques were used to recruit 91 elderly informants (≥ 50 years-old for participation in semi-structured interviews and structured surveys regarding the use of the local flora for medicinal and food purposes. Standard ethnobotanical methods were employed and prior informed consent was obtained for all study participants. Results and Conclusion The uses of 98 plants species belonging to 39 families were recorded; the most quoted botanical families were Rosaceae, Asteraceae, and Lamiaceae. Mainly decoctions and infusions were quoted as folk medicinal preparations and the most common uses referred to gastrointestinal and respiratory disorders, as well as illnesses of the uro-genital system. Among the most uncommon medicinal taxa quoted by the informants, Carduus nutans L., Echinops bannaticus Rochel ex Schrad., and Orlaya grandiflora Hoffm. may merit phytochemical and phytopharmacological investigations. Comparison of the data with other ethnobotanical field studies recently conducted on the Albanian and Montenegrin sides of the same Alps has shown a remarkable link between the medical ethnobotany of Montenegrin and Kosovar side of the Albanian Alps. Moreover, folk uses of the

Sexual orientation, gender identity and non-discrimination - The Albanian labor legislation and its effects on employment and vocational training potentials

Directory of Open Access Journals (Sweden)

Albana Shtylla

2013-01-01

The Constitution of the Republic of Albania, the Albanian labour legislation and the legislation generally, are inspired in accordance with the non-discrimination principles, objectives and definitions of international acts, promoting and expressing protection of human rights and freedoms in general, and in particular in the field of employment and vocational training. This paper will analyze, if the sexual orientation, is one of the causes of discrimination for employment and vocational training, in Albanian legislation, especially how it is expressed this issue on the Constitution of the Republic of Albania, the Albanian Labour Code, the Albanian law “On the protection against discrimination” ect.

Perseus Project: Interactive Teaching and Research Tools for Ancient Greek Civilization.

Science.gov (United States)

Crane, Gregory; Harward, V. Judson

1987-01-01

Describes the Perseus Project, an educational program utilizing computer technology to study ancient Greek civilization. Including approximately 10 percent of all ancient literature and visual information on architecture, sculpture, ceramics, topography, and archaeology, the project spans a range of disciplines. States that Perseus fuels student…

Three Hungarian researchers and three periods of the history and culture of the Albanian people

Directory of Open Access Journals (Sweden)

Myrvete Dreshaj-Baliu

2016-11-01

Full Text Available The object of this study is the contribution of three Hungarian researchers: the publicist, the editor and the historian Windisch (Karl Go$ lieb von Windisch, 1725 -1793; the outstanding historian, medievalist, latinist and germanist Thalloczy (Ludwig von Thallóczy, 1857-1916; and the geographer and ethnographer of international dimensions Nopcsa (Baron Nopcsha 1877-1933. Their selection is not random; it refl ects the up to now development in the science of Albanology and our goal as researchers and evaluators to place them on the Pantheon of the Albanian studies. These three names represent, at the same time, three particular dimensions of our national history: the fate of an ethnicity detached from its national territory in certain historical and cultural circumstances (Windisch; documentation of the Albanian space in a particularly controversial period of the Middle Ages in Albania and the Balkans (Thalloczy; and the wealthiest historical, ethnographic, material, spiritual and linguistic landscape of the Albanian people in the beginning of the twentieth century (Nopcsa. Therefore, let us state in the very beginning that recognition of their contribution also implies the recognition of some of the most important achievements of the Albanian studies.

Quality Management Systems And Impact From Standardization In Albanian Companies

Directory of Open Access Journals (Sweden)

Ira Zoga Gjika

2015-08-01

Full Text Available The increase of competition in the local and regional markets is forcing companies to provide high quality products and services as well as to continuously improve their activities. The quality management systems and standard implementation in Albanian companies are the at the focus of this paper with the intention to evidence the actual situation and the results achieved from the certification process. The implementation of ISO standard requirements together with the assessment of the benefits deriving from it is a relatively new experience for Albanian companies and slightly developed in our economic literature. Consequently this work follows a combined approach of reviewing the relevant rich literature of the last decades with the empirical survey of some Albanian companies that have chosen ISO certification as an instrument to gain competitive advantage in the market. The analysis of factors that drive companies towards such time consuming costly and managerially- wise committed process is one of main study objectives. It is followed by the assessment of benefits deriving from this process for companies in quantitative and qualitative terms. Comparing the expected advantages from the certification with those actually obtained might assist companies themselves to improve their processes. From the other side this comparison serves as a basis for suggestions and recommendations to other companies that intend to make good use of advantages the ISO certification.

The effects of Albanian terrorism in Kosovo and Metohija

Directory of Open Access Journals (Sweden)

Stevanović Obrad M.

2015-01-01

Full Text Available The very first ideas about secession of Kosovo and Metohija of the Republic of Serbia and the use of violence in achieving them appeared immediately after the First Balkan War (1912. The key pillars of this, secessionist motivated violence in Kosovo during and after the wars of liberation of Serbia (1912 and 1918. And between the two world wars, were kachach, during and after World War II that were ballistic groups of Albanian extremists. Violence based on their tradition, with unforeseeable serious consequences for vital interests of the Republic of Serbia, escalated in the last decade of the twentieth century, violence Albanian extremist group called the Kosovo Liberation Army (KLÁ, supported by influential members of the international community. In many papers, the analysis of the specific objectives, the holders-active entities, resources, facilities attack - passive subjects and consequences, as constituent elements of that violence, confirmed his terrorist character of the KLÁ as a terrorist profile of its key holder. In this regard, the work is the result of research in which the author, as a consequence of the analysis of the constituent elements of Albanian terrorism in Kosovo and Metohija, the end of the last century and the beginning of this century, identified scientifically described and classified the effects, or levels of achievement of objectives internal and holders Foreign support­ers. In addition to the indisputable proven effects in achieving the goals of the operational and intermediate levels, the work is proven and partial achievement of strategic-political (ethno-separatistic internal target holders of Albanian terrorism in Kosovo and Metohija, defined as secession-the secession of Kosovo and Metohija from the Republic of Serbia. The deployment of international military, security and civilian forces in Kosovo and Metohija, with the tempo­rary transfer of jurisdiction of state authorities of the FRY and Serbia to the

Analytical study of ancient pottery from the archaeological site of Aiani, northern Greece

International Nuclear Information System (INIS)

Iordanidis, A.; Garcia-Guinea, J.; Karamitrou-Mentessidi, G.

2009-01-01

The present study is a multi-analytical approach on the characterization of several potsherd samples, dated from prehistoric to hellenistic times, from Aiani, ancient Upper Macedonia, northern Greece. In particular, X-ray Diffraction (XRD), X-ray Fluorescence (XRF) and Environmental Scanning Electron Microscopy, coupled with Energy Dispersive X-ray system (ESEM-EDX) were used for the determination of the morphological, chemical and mineralogical characteristics of the potsherds. The preliminary results indicated a rather local provenance of the analyzed ancient pottery samples and a finer texture and thus better ceramic manufacture as getting to hellenistic era. The use of a silicious or calcerous raw material is probably related to the specific utilization of each ceramic vessel in ancient times. The presence of gehlenite or pyroxene minerals in the ceramic matrix indicated higher firing temperatures, while lower temperatures were deduced when finding phylosilicate minerals. The preliminary results of this study do not necessarily imply that all the pottery of this area, belonging to the same chronological type, have similar physicochemical characteristics

Microanalysis study on ancient Wiangkalong Pottery

Science.gov (United States)

Won-in, K.; Tancharakorn, S.; Dararutana, P.

2017-09-01

Wiangkalong is one of major ceramic production cities in northern of Thailand, once colonized by the ancient Lanna Kingdom (1290 A.D.). Ancient Wiangkalong potteries were produced with shapes and designs as similar as those of the Chinese Yuan and Ming Dynasties. Due to the complex nature of materials and objects, extremely sensitive, spatially resolved, multi-elemental and versatile analytical instruments using non-destructive and non-sampling methods to analyze theirs composition are need. In this work, micro-beam X-ray fluorescence spectroscopy based on synchrotron radiation was firstly used to characterize the elemental composition of the ancient Wiangkalong pottery. The results showed the variations in elemental composition of the body matrix, the glaze and the underglaze painting, such as K, Ca, Ti, V, Cr, Mn and Fe.

Italianization Accomplished. Forms and Structures of Albanian Television’s Dependency on Italian Media and Culture

Directory of Open Access Journals (Sweden)

Paolo Carelli

2014-06-01

Full Text Available After the fall of the Berlin Wall and the end of communist regimes in 1989, national media systems of the Eastern European countries belonging to the Soviet bloc began a process of transformation along the way of liberalization and commercialization. In Albania, this process occurred in different phases, but with a common trend, that is the Italian television as a structural, economic and cultural model to inspire. In this article, I try to outline the deep influences and legacies between Italian and Albanian television systems (dating back to the last years of the regime showing how, despite a progressive sliding towards americanization, they remain a typical landmark of Albanian media. From the formats of the first programmes after the regime to the recent appearances of Italian Tv presenters (in particular, from Berlusconi's channels on Albanian private channels, we can observe a subtle but rooted and continuous dependency from the country on the other side of the Adriatic Sea.  

The Integration Method of Ceramic Arts in the Product Design

Science.gov (United States)

Shuxin, Wang

2018-03-01

As one of the four ancient civilization countries, the firing technology of ceramic invented by China has made a great contribution to the progress and development of human society. In modern life, even the development of technology still needs the ceramics, there are large number of artists who take the ceramics as carrier active in the field of contemporary art. The ceramics can be seen everywhere in our daily life, this paper mainly discusses the integration means of ceramic art in the product design.

A Population-Based Assessment of Human Rights Abuses Committed Against Ethnic Albanian Refugees From Kosovo

Science.gov (United States)

Iacopino, Vincent; Frank, Martina W.; Bauer, Heidi M.; Keller, Allen S.; Fink, Sheri L.; Ford, Doug; Pallin, Daniel J.; Waldman, Ronald

2001-01-01

Objectives. This study assessed patterns of displacement and human rights abuses among Kosovar refugees in Macedonia and Albania. Methods. Between April 19 and May 3, 1999, 1180 ethnic Albanian refugees living in 31 refugee camps and collective centers in Macedonia and Albania were interviewed. Results. The majority (68%) of participants reported that their families were directly expelled from their homes by Serb forces. Overall, 50% of participants saw Serb police or soldiers burning the houses of others, 16% saw Serb police or soldiers burn their own home, and 14% witnessed Serb police or soldiers killing someone. Large percentages of participants saw destroyed mosques, schools, or medical facilities. Thirty-one percent of respondents reported human rights abuses committed against their household members, including beatings, killings, torture, forced separation and disappearances, gunshot wounds, and sexual assault. Conclusions. The present findings confirm that Serb forces engaged in a systematic and brutal campaign to forcibly expel the ethnic Albanian population of Kosovo. In the course of these mass deportations, Serb forces committed widespread abuses of human rights against ethnic Albanians. PMID:11726386

Kosovo and Metohija: Serbia’s troublesome province

Directory of Open Access Journals (Sweden)

Bataković Dušan T.

2008-01-01

Full Text Available Kosovo and Metohija, the heartland of medieval Serbia, of her culture politics and economy (1204-1455, experienced continuous waves of spiralling violence, forced migration and colonization under centuries-long Ottoman rule (1455-1912. A region which symbolizes the national and cultural identity of the Serbian nation as a whole now has an Albanian majority population, who consider it an ancient Albanian land, claiming continuity with ancient Illyrians. Kosovo was reincorporated into Serbia (1912 and Yugoslavia (1918 as a region lacking tradition of interethnic and interreligious tolerance and cooperation. The two rivalling Kosovo nations, Albanians and Serbs, remained distant, maintaining limited interethnic communication throughout the twentieth century. The mounting national and ideological conflicts, reinforced by the communist ideology made coexistence almost impossible, even after the 1999 NATO bombing campaign and establishment of KFOR-secured UN administration. Kosovo’s unilateral declaration of independence in February 2008 is a dangerous attempt to establish a second Albanian state extended into the heartland of Serbia, a failed state cleansed of both Serbs and other major non-Albanian communities.

Lexicon of Albanian mythology: areal studies in the polylingual region of Azov Sea

Directory of Open Access Journals (Sweden)

Alexander Alexandrovich Novik

2015-09-01

Full Text Available Lexicon of Albanian mythology: areal studies in the polylingual region of Azov Sea Four villages with Albanian population are located in the Ukraine: Karakurt (Zhovtnevoe set up in 1811 (Odessa region, Tyushki (Georgievka, Dzhandran (Gammovka and Taz (Devninskoe set up in 1862 (Zaporizh’a region. The analysis of lexica of the Albanian subdialect of the Ukraine shows the continuation of the use of mythological terminology between the districts of the South-Eastern Albania (Korça, Devoll, Kolonja and the Albanian-speaking villages of the Azov Sea region. The Albanian subdialect of the Ukraine has no collective lexeme to designate all the representatives of the demonic world. The most common forms of denotation are these: nok janë të prastúrë (lit. ‘they are unclean’, shpírti nok i prastúrë (lit. ‘unclean spirit’. There are a large number of stories about the transformation of people into the animals – dogs, cats, goats, foxes, chickens etc. and even into things (the most common plot variant is about transformation of a man into a wheel. Also we observe the personification of the steppe wind among the Albanians of the Ukraine. Thus there is a special word for such a kind of wind in this subdialect – varalluzhg/ë, –a (‘varaluzhga’. The Balkan peoples believe that the fate of every individual is assigned by three mythological characters. Most of them, including the Albanians, consider that these three characters are female. They appear several hours after the child’s birth and assign its fate. The Albanians of the Ukraine keep these beliefs, but according to their system of mythological images, there are three men determining the child’s fate instead of three women. As the native consultants claim, these are three huge, tall and strong black men (tri burre qysh japin fatnë. Another variation on this theme comprises the stories about Christ’s disciples, the apostles and their followers, who can also determine the

The importance and values of curriculum’s content of the Albanian language for the fifth grade (primary school

Directory of Open Access Journals (Sweden)

Zeki Morina

2016-11-01

Full Text Available The region of Gjakova has an early tradition in the field of education and culture. In other words, it has powerful intellectual capabilities. Main aim of this paper is to elaborate the beginning of the teaching of Albanian for the fifth grade of the primary school. Its mission is also to enrich pupils’ experiences and interests on learning Albanian language and literature. This subject develops fundamental abilities of pupils and opens the paths of their knowledge in order to be successful in all fields of the curriculum. As a result of this, learning Albanian language urges pupils to respect human heritage, while through language, are established and transmitted core messages and notions to understand themselves and social world. It has also a strong influence in the wide individual’s development regarding emotional, intellectual, physical and social aspects.

Neutron activation analysis of bulk samples from Chinese ancient porcelain to provenance research

International Nuclear Information System (INIS)

Jian Zhu; Wentao Hao; Jianming Zhen; Tongxiu Zhen; Glascock, M.D.

2013-01-01

Neutron activation analysis (NAA) is an important technique to determine the provenance of ancient ceramics. The most common technique used for preparing ancient samples for NAA is to grind them into a powder and then encapsulate them before neutron irradiation. Unfortunately, ceramic materials are typically very hard making it a challenge to grind them into a powder. In this study we utilize bulk porcelain samples cut from ancient shards. The bulk samples are irradiated by neutrons alongside samples that have been conventionally ground into a powder. The NAA for both the bulk samples and powders are compared and shown to provide equivalent information regarding their chemical composition. Also, the multivariate statistical have been employed to the analysis data for check the consistency. The findings suggest that NAA results are less dependent on the state of the porcelain sample, and thus bulk samples cut from shards may be used to effectively determine their provenance. (author)

IMMIGRATION AND ITS IMPACT IN ALBANIAN LABOR MARKET

Directory of Open Access Journals (Sweden)

Irma SHYLE

2010-09-01

Full Text Available Population growth has already begun to fall in most of the countries. In the wider European area, therefore, population decline is likely to occur several years earlier. Regions with declining population demographic trends are affected by social and economic developments. Migration flows, in particular, are related to regional differences in labor market conditions, people moving from areas of low job growth to ones with more employment opportunities, and, over the longer-term, such differences can also affect birth and death rates. Declining regions in the EU are, therefore, characterized by low income levels, high unemployment and a large proportion of the work force employed in agriculture and industry. In addition, they tend to have a relatively small number of young people, reflecting their migration to other areas as well as low fertility rates, and a low density of population, reflecting the rural nature of many of them. The aim of this paper is to present the important consequences these trends will have regarding Albanian reality. We will see this for social welfare and taxation systems. We are also going to present here the policies to discourage illegal immigration, engaged in facilitating the entry, installment into the labor market, legal regulation, and social integration of Albanian emigrants in receiving countries. Finally, we will promote the impact of voluntary return of emigrants in the country development.

The Western accounts on early Albanian-Serbian interactions and the Kosovo myth

Directory of Open Access Journals (Sweden)

MA. Arben Salihu

2017-06-01

Full Text Available For most of the last millennium, the Balkan region, has been associated with conflicts, wars and instability. Indeed, even today, the situation is very tense. Finding the causes of it, is imperative, but that still does not resolve the deep divisions that are ingrained. The aim of this study is to explore what the Western literature reveals about Balkan enmities, more specifically Albanian-Serbian hostilities throughout past centuries, by focusing at certain periods or events that had a great impact in historical context. The study focuses extensively on Kosovo myth, but also on other specific episodes of Albanian- Serbian interaction, namely Serbian Empire, 1389 Kosovo battle, the description event of Murat I death, and 1806 Serbian Revolution among others. One must bear in mind that Albanians and Serbs presented a united front in certain battles and fights (namely in 1389 and 1806, but later turned guns against each other, resulting in thousands unnecessary deaths. This occurred not because their respective citizens wanted so, but was largely incited through government myths and insincere propaganda. Taking exclusively the Western perspective in this context, whose exploration of events in the Balkans is pretty detailed, only enriches the quality of this study. This research concludes that the region should and must learn from past mistakes that living with myths, wars and propaganda leads to nowhere. The Balkan more than ever needs proactive and creative leaders that shift the minds of Balkan people towards elimination, or at least diminishing, of both physical and mental boundaries against each other.

[Raman and EDXRF Study on Overglaze Decorations of Jingdezhen Ceramics].

Science.gov (United States)

Wu, Juan; Zhang, Mao-lin; Wu, Jun-ming; Li, Qi-jiang; Cao, Jian-wen; Li, Qing-hui; Zhao, Hong-xia

2015-05-01

Overglaze decoration porcelain is an important category of ancient Chinese ceramics, which has significant artistic value and scientific value. Nondestructive analysis methods such as Raman spectroscopy and EDXRF were used to analyze the overglaze decorations on the Jingdezhen ceramic samples of Yuan, Ming and Qing Dynasty. The recipe and color mechanism of the overglaze pigments were discussed according to the chemical composition and phase composition analysis. The study found that dark red overglaze decorations of ancient Honglvcai, Wucai and famille rose in Jingdezhen are colored by hematite, yellow color is lead tin yellow, carmine decoration is colored by gold less than 0. 1 % in concentration, and green decorations are colored by bivalent copper ion. The result also indicates that the effective combination of Raman spectroscopy and EDXRF can play an important role in the deep research on ceramic artifacts, especially for the overglaze decoration pigments which are interveined each other.

Population aging in Albanian post-socialist society: Implications for care and family life

Directory of Open Access Journals (Sweden)

Meçe Merita

2015-12-01

Full Text Available Population aging is becoming an inevitable phenomenon in Albanian post-socialist society, posing multi-faceted challenges to its individuals, families and society as a whole. Since 1991, the Albanian population has been exposed to intensive demographic changes caused by unintended aspects of socio-economic transition from a planned socialist economy to a market-oriented capitalist one (Hoff, 2008. Ongoing processes of re-organization of social institutions increased its socio-economic insecurity leading to the application of various coping mechanisms. While adjusting themselves to other aspects of life, people changed their decisions of having children and leaving the country (Hoff, 2008. On the other hand, replacement of former traditional extended family forms with diverse living arrangements and family structures has been the outcome of the combination of three factors: falling fertility, increasing life expectancy and increasing migration (INSTAT, 2014.

The economic and social effects of the albanian war (1940-1941) on Greece and the problem of war financing

OpenAIRE

Καλαφάτης, Θανάσης

2000-01-01

The research on economic relations during the Albanian war has not proceeded systematically. This paper examines the economic activities during this period. At first, we mention certain principles and directions of a war economy. In continuation, we analyze the influence of the Albanian war on the Greek economy, specifically on agriculture and industry, and the economic and social consequences of the practice which the August 4th regime followed in order to finance the war expe...

There Is No Elevation of Immunoglobulin E Levels in Albanian Patients with Autoimmune Thyroid Diseases

Directory of Open Access Journals (Sweden)

Hatixhe Latifi-Pupovci

2014-01-01

Full Text Available Background. Studies in several ethnic groups reported high incidence of elevated levels of immunoglobulin E (IgE in patients with autoimmune thyroid diseases (ATD, especially in patients with Graves’ disease. Objective. To study association between serum levels of IgE and thyroid stimulating hormone receptor antibodies (TRAb in Albanian patients with ATD. Material and Methods. Study was performed in 40 patients with Graves’ disease, 15 patients with Hashimoto’s thyroiditis, and 14 subjects in the control group. The IgE levels were measured by immunoradiometric assay, whereas the TRAb levels were measured by radioreceptor assay. Results. In all groups of subjects the IgE levels were within reference values (<200 kIU/L. Significant difference in mean concentration of IgE was found between two groups of Graves’ disease patients, and those with normal and elevated TRAb levels (22.57 versus 45.03, P<0.05. Positive correlation was found between TRAb and IgE only in Graves’ disease patients (r=0.43, P=0.006. Conclusion. In Albanian patients with ATD there is no elevation of IgE levels. This could be the result of low prevalence of allergic diseases in Albanian population determined by genetic and environmental factors.

The Albanian organization and organizational structure - the challenges of the adaptation to the dynamic reality

Directory of Open Access Journals (Sweden)

Ludmilla Shkurti

2014-09-01

Full Text Available There were 78,400 enterprises active in Albania in 2011, employing 180,800 people, of which 47% worked in 1,684 enterprises employing more than 20 people. These last enterprises represented 61 percent of the total turnover, and 75 percent of the total investments. These enterprises are predominantly in the industrial and construction sectors. Enterprises with 1-4 employees represent 91 percent of the total enterprises, and represent 14 percent of total turnover. Small enterprises are dominant in the service sector. Business in Albania is currently operating in a global environment, which has a great impact on the theory or practice of organizations, and also on the working behaviour of employees. This already complex environment, which is becoming increasingly dynamic, and growing competition, are also changing the way in which work is organized, as well as the solutions. Great opportunities are arising from a better understanding of Albanian contemporary organizations and the work environment. To take advantage of these opportunities, the trends regarding the relationship between organizational design and design work should be studied and identified. The aim is to identify the potential patterns and the current trends and tendencies in Albanian organization design, providing useful knowledge in the field of Albanian business practices, and future challenges for research in this direction.

A görög-albán kapcsolatok története a 20. században - Greek-Albanian Relations in the 20th Century

Directory of Open Access Journals (Sweden)

BALOGH, Ádám

2014-03-01

Full Text Available The Greek and the Albanian nations have been living close to each other approximately in the same territory for almost three thousand years. An ethnically mixed population had lived in the contact zone of the two nations (Epirus, or Chameria in Albanian without any territorial disputes. Neither religious, nor language differences caused any serious conflicts between the Greeks and the Albanians until the 19th century when nationalism changed the political situation completely. However, Pan-Slavism and the decline of the Ottoman Empire prompted the cooperation of the two nations which was based on the Pelasg ideology, namely the common origin of the Greeks and the Albanians. Epirus was divided as a consequence of the Balkan Wars, and from that point, the status of minorities has poisoned the relationship between Albania and Greece. The author of the present article gives an overview of the historical antecedents and discusses the Greek-Albanian relations in the 20th century.

Traditional pharmacopoeias and medicines among Albanians and Italians in southern Italy: A comparison

NARCIS (Netherlands)

Pieroni, A.; Quave, C.L.

2005-01-01

A cross-cultural comparison of traditional household remedies in primary health care and ritual healing practices in two economically and socio-demographically similar communities in Lucania (inland southern Italy) was considered: Ginestra/Zhurë, inhabited by ethnic Albanians, who migrated to the

An ancient relation between units of length and volume based on a sphere.

Directory of Open Access Journals (Sweden)

Elena Zapassky

Full Text Available The modern metric system defines units of volume based on the cube. We propose that the ancient Egyptian system of measuring capacity employed a similar concept, but used the sphere instead. When considered in ancient Egyptian units, the volume of a sphere, whose circumference is one royal cubit, equals half a hekat. Using the measurements of large sets of ancient containers as a database, the article demonstrates that this formula was characteristic of Egyptian and Egyptian-related pottery vessels but not of the ceramics of Mesopotamia, which had a different system of measuring length and volume units.

Volcanic ash in ancient Maya ceramics of the limestone lowlands: implications for prehistoric volcanic activity in the Guatemala highlands

Science.gov (United States)

Ford, Anabel; Rose, William I.

1995-07-01

In the spirit of collaborative research, Glicken and Ford embarked on the problem of identifying the source of volcanic ash used as temper in prehistoric Maya ceramics. Verification of the presence of glass shards and associated volcanic mineralogy in thin sections of Maya ceramics was straightforward and pointed to the Guatemala Highland volcanic chain. Considering seasonal wind rose patterns, target volcanoes include those from the area west of and including Guatemala City. Joint field research conducted in 1983 by Glicken and Ford in the limestone lowlands of Belize and neighboring Guatemala, 300 km north of the volcanic zone and 150 km from the nearest identified ash deposits, was unsuccessful in discovering local volcanic ash deposits. The abundance of the ash in common Maya ceramic vessels coupled with the difficulties of long-distance procurement without draft animals lead Glicken to suggest that ashfall into the lowlands would most parsimoniously explain prehistoric procurement; it literally dropped into their hands. A major archaeological problem with this explanation is that the use of volcanic ash occurring over several centuries of the Late Classic Period (ca. 600-900 AD). To accept the ashfall hypothesis for ancient Maya volcanic ash procurement, one would have to demonstrate a long span of consistent volcanic activity in the Guatemala Highlands for the last half of the first millennium AD. Should this be documented through careful petrographic, microprobe and tephrachronological studies, a number of related archaeological phenomena would be explained. In addition, the proposed model of volcanic activity has implications for understanding volcanism and potential volcanic hazards in Central America over a significantly longer time span than the historic period. These avenues are explored and a call for further collaborative research of this interdisciplinary problem is extended in this paper.

Spatial Changes and Population Movements on the Albanian Coastline

Science.gov (United States)

Kanjir, U.; Gregorič Bon, N.

2016-06-01

The last decade has seen a large increase in construction along the southern Albanian coastline, mainly in the rise of large tourist complexes comprising hotels, apartment houses, touristic villages, and so on. These constructions rarely follow urban planning and not only change its landscape but also often threaten the ecological value of the coastal zone. The uncontrolled and devastating construction along the coast has been accompanied by coastal erosion caused by the sea with the intensity up to 50 cm/year. This paper investigates the environmental change monitoring on the Albanian Riviera by analysing optical remote sensing data (Landsat 5 and 8) in the period between 1984 and 2015. The image analysis results grounded on the change vector analysis indicate coastal morphology changes and land cover changes in the coastal environment, which appear mostly due to erosion in river delta and urban growth. Apart from identifying both phenomena through time, the objective of this study is to show that these landscape changes in fact correlate with the population migration as well as to explain why and the extent to which Albania is one of the most migratory countries in Europe. Based on the multidisciplinary research, which combines anthropological method with spatial analysis, this presentation anticipates future changes in this area. It argues that movements of both people and in landscape formations strongly influence each other, constituting a closely corresponding relationship.

Tobacco Smoking Habits, Attitudes, and Beliefs among Albanian Nurse Students

OpenAIRE

Ylli Vakeffliu; Silvana Bala; Rudina Pirushi; Kujtime Vakeffliu; Jul Bushati; Andrea S. Melani

2013-01-01

Background. Available information about tobacco smoking habits, attitudes, and beliefs among Albanian nurse students shows some discrepancies and requires further investigation. Material and Methods. Cross-sectional school-based survey using a self-administered anonymous questionnaire in the Tirana Nurse University in December 2012 about tobacco smoking habits, attitudes, and beliefs. Results. Sixty hundred fifty one students (mean age 20.0 years; males 19%, females 81%) completed the questio...

The Albanian National Question and the Myth of Greater Albania

Science.gov (United States)

2013-03-01

convey better Serbian nationalist message. Serbian texts were full with myths27 and tales of heroic martyrs who killed or died for Serbia and Kosova...maintaining it support for Albanian integration into the EU, makes maximum efforts to achieve its policy objectives found in the infamous Megali...lands. To satisfy their demands, Greek, and Serbian elites, created infamous platforms and plans against other peoples’ in the region and in

Diasporas and secessionist conflicts: the mobilization of the Armenian, Albanian and Chechen diasporas

NARCIS (Netherlands)

Koinova, M.

2010-01-01

This article examines the impact of diasporas on secessionist conflicts, focusing on the Albanian, Armenian and Chechen diasporas and the conflicts in Kosovo, Karabakh and Chechnya during the 1990s. How do diasporas radicalize these conflicts? I argue that despite differences in diaspora communal

(Re)Presentations of Islam in Albanian History Textbooks from 1990 to 2013

Science.gov (United States)

Sulstarova, Enis

2017-01-01

This article investigates the role of Islam in representations of the self and the other in the contemporary Albanian national discourse, on the basis of an analysis of history textbooks published in postcommunist Albania between 1990 and 2013, focusing specifcally on texts used in pre-university education. Even after the dissolution of the…

The council of the employees in the Albanian Commercial Law

Directory of Open Access Journals (Sweden)

Diana Biba

2016-01-01

Full Text Available Law No. 9901/2008 on “Entrepreneurs and Commercial Companies”, marked a milestone in the reform of the commercial law in Albanian. Among other novelties, the Law introduced a new approach in regard to the employees and their participation in co determination. Actually, the involvement of the employees were not that unfamiliar in the former Albanian Commercial Legislation thought the social responsibility was. The Law brought in a new approach which was widely inspired from the EU Law, by establishing the Council of the Employees for any commercial company having more than 50 employees. It is true that unlike the trade unions, it is the company that bears the costs of the establishment and functioning of these councils, but besides the costs, it would mean to grant importance to the employees, as stakeholders of the corporate, by being part of the decision making process with regard to the use of special funds or actives of the company or to the allocation of the divided that the General Assembly resolves to allocate to the employees. This article will explore the legal provisions of the Law in regard to the Council of the Employees, its establishment, functioning and entitlement and how these provisions are enforced in practice from the companies in Albania.

BOT Contract through the optics of Albanian legal provisions - Issues of the implementation and transfer framework

Directory of Open Access Journals (Sweden)

Entela Prifti

2016-07-01

Full Text Available The last years have resulted in an increase of concession contracts in Albania, followed by a revised modern legal framework. Beside the debate on whether the government should perform most of the activities itself instead of giving them to the private sector through a concession contract, the concession contracts are nowadays a reality and as such they should be studied and analysed carefully. The scope of this article is limited to the provisions of the Albanian legislation and its approach to the international provisions regarding BOT (build – operate - transfer concession contract. A detailed analyse will drive to the conclusionas to what extent the Albanian concession legislation does compile with the international accepted principles of Public Private Partnership concerning mainly implementation and transfer phase of a BOT contract. Albanian Public Private Partnershiplegislation has gone through many revisions and amendments during the last twenty years, resulting in a challenging situation for everybody that deals with any aspects of a concession. Having a detailed understanding of the legal provisions is indeed the core element toward a successful implementation process of any concession, resulting in the highest profitability for concession parties, the public entity and the private investor, and consequently culminating to the best interest of the population.

Terminology of economics in Albanian: Current state, problems and tasks

OpenAIRE

Mulaj, Isa

2012-01-01

The primary aim of this paper was to analyze the state of terminology of economics in Albanian language, and depending on the problems identified, to address some recommendations as tasks that are deemed necessary for future research that would contribute to its standardization. The paper begun from the hypothesis that the terminology in question is relatively rich, but finds that academic and scientific research are very limited or largely neglected, thus creating a vacuum in its broader and...

Gender and migration in Greece: the position and status of Albanian women in Patras

Directory of Open Access Journals (Sweden)

Dimitra Charalampopoulu

2004-06-01

Full Text Available Greece has experienced major changes in its migration patterns.After a century or so of emigration, it has now become a country of immigration. Much academic research has concentrated on the impact this change has on Greek society. However, there is a tendency to ignore the role that gender plays in the migration process. This article addresses the issue of Albanian immigration to Greece, focusing on the aspect of gender. It presents the living and working conditions of Albanian women who migrate to Greece, especially to one of its cities, Patras. It examines the new migration process through the eyes of women migrants. It is centred on their narration about their journey to Greece, their decision to migrate, the problems that they face, their experiences and plans for the future: in short, their life stories. Finally, the article draws attention to the need for further research on issues concerning migrant women in Greece.

Albanian economy, sustainable development and comparative analysis of SME growth rates

Directory of Open Access Journals (Sweden)

Hava Mucollari

2016-03-01

Full Text Available Financial activity in Albania as well as in other countries of Eastern Europe during the past few years has seen significant important developments. One of the main features observed is that financial activity in Albania is dominated by banking activity, while non-banking activity remains extremely limited. The investment funds in Albania according to the Albanian legislation on “Investment Funds” could be any private entity that accumulates financial resources of natural or legal persons (Vouchers, cash etc. In this paper we will focus precisely on the definition of SME and their ability to build a business plan that will help them to be successful in terms of seeking funds. For this reason, SME and their financing opportunities in Albania is one of the issues that will be analyzed. Firstly we will treat the business plan in theory and its role in SME, and hot to draft a business plan for a Travel Agency. In this paper we study the literature on the concept of SME and the business plan. For this reason we have found valid date information on studies from various writers and publications. By giving a financial view on SME on Albania, we have analyzed information from bulletins of the Albanian Bank.

Comparative analysis of the EU criminal law for environmental protection and the Albanian one

Directory of Open Access Journals (Sweden)

Iris Petrela

2016-03-01

Full Text Available This paper consists of two main parts where the first one presents the path how the environmental issue was included in the primary legislation of the European Union (EU, starting this theoretical panorama from the first founding treaty – Treaty of Rome, in 1957. It shows that with the passing of years the environmental protection has become one of the most important fields of action of the European Community supported by the primary and secondary legislation of the EU and its several bodies with competencies in this field. The second part of the paper starts with the commitments on the environmental protection that the Albanian state has made upon signature and entrance into force of the Stabilisation and Association Agreement with the EU. In addition, this article presents a summary of the legislative activity in Albania regarding environmental protection in the last two decades with special focus on the time period after the approval of the current Constitution of 1998, which is the basis and origin of every legislative initiative. Furthermore, there are presented the key features of the Albanian environmental legislation, as well as the protection mechanism from the criminal legislation point of view. The presentation of the European and national reality with special focus on environmental protection serves to a comparative purpose between the two models. It also serves to draw conclusions and propose suggestions on how the Albanian legislation should be developed and improved in order to be in line with that of the European Union and effective in practice to serve the ultimate goal of environmental protection and prevention from further environmental degradation.

Internationalization of higher education in Albania - Dilemmas and challenges: Albanian public and private universities in the new globalization era

Directory of Open Access Journals (Sweden)

Dr.Sc. Teuta Dobi

2011-12-01

Full Text Available Internationalization of higher education in Albania although an emerging necessity is still in very low figures not only as a connection between institutions but even as mobility between students. This paper sheds lights on internationalization at the regional and at the global level. It analyzes how the globalization and European integration processes are affecting public and private higher education institutions in Albania, their study programs and universities internal management structures. Firstly, it examines the overall changes in the Albanian HE sector since the beginning of 1990s. Then it explores the differences in internationalization between public and private universities and the ultimate changes on the Albanian labor market. My main thesis is that Albanian HE institutions increasingly need to put more efforts to internationalize their internal management structures and to put in practice international study programs. The paper analyzes more the advantages of the international study programs and the difficulties in a development country like Albania to implement them. The paper is based on the case study of the European University of Tirana and explores the difficulties of the faculties of this university to find financial support for international programs, research and travelling abroad, to develop courses with one international perspective, support for its students to study abroad, support to students from other countries and on other indicators such as grants, contracts and linkages in international areas. However the paper deals also with the academic requirements the issue of quality of universities in general. At the end the paper makes a prognosis of some strategies and gives some recommendations how to integrate the Albanian higher education institutions at a regional or global level.

Investigation of elements enabling the characterization of archeological ceramics by neutron activation analysis

International Nuclear Information System (INIS)

Diebolt, J.; Ricq, J.

1976-01-01

Twelve samples of about 100mg each, taken in an ancient ceramics at different depths were irradiated in the high flux Grenoble reactor (1.6x10 3 n.cm -2 .s -1 ). The results obtained show that activation analysis enables the characterization of archeological ceramics by the determination of elements such as Hf, Sc, Cr and Sc or Ti and V [fr

Participation in IAEA proficiency test exercise on major, minor and trace elements in ancient Chinese ceramic (IAEA-CU-2006-06) using low power research reactor

International Nuclear Information System (INIS)

Waheed, S.; Siddique, N.; Zaidi, J.H.

2011-01-01

A proficiency test (PT) exercise was offered by the International Atomic Energy Agency (IAEA) for major, minor and trace elements in Chinese ceramic reference material (IAEA-CU-2006-06). Neutron activation analysis (NAA) laboratory at PINSTECH, Pakistan participated in the exercise and submitted the results for 28 elements. The aim of participation was to develop a suitable methodology for accurate measurement of as many elements as possible in ceramic material using a low power reactor (PARR-2) as this would help future investigation in a project on the authenticity of art objects, for provenance, conservation and management of ancient cultural heritage of the country. After receiving the final report of the PT exercise, a critical review of our data and final scoring of each element is made to check the suitability of our methodology and reliability of the acquired data. Most of the reported results passed different statistical evaluation criterion such as relative bias, z-score and u-scores and ratio of our results and IAEA target values. One element (Yb) falls in the unacceptable range of relative bias and z-scores. Hf and Tb showed slightly high z-scores within the questionable range. Ho, Mo and Sn were determined during this study but their results were not submitted to the IAEA. The confidence of accuracy observed for most of the elements in ceramic material has made it mandatory to report their results as information values. (author)

Originating relation studies on ancient porcelains of chines Ru and Jun by NAA

International Nuclear Information System (INIS)

Zhao Weijuan; Xie Jianzhong; Gao Zhengyao; Li Guoxia; Li Rongwu; Zhang Bin

2002-01-01

50 samples of glazes and bodies of the ancient Chinese Ru porcelain, Jun porcelain and imitative ancient ceramics were analyzed by neutron activation analysis (NAA). The contents of 36 elements in each sample were measured. The NAA data were statistically treated by fuzzy cluster method and the trend cluster diagram was obtained. Their classes and raw material sources were determined. The results show that although these samples spanned hundreds of years, came from different kilns and had different glazes colors, the bodies of the ancient Chinese Ru porcelain and Jun porcelain belong to the same kind, the glazes of the ancient Chinese Ru porcelain is similar to the glazes of the ancient Chinese Jun porcelain. The originating places of the body raw material were concentrated, and that of the glaze raw materials were scattered, the source of the glaze raw material covered that the body raw material. The ancient Chinese Ru porcelain and Jun porcelain have basically the same raw material sources and the sources of raw material are stable in long time. It is found that most modern Jun porcelain samples are similar to the ancient Chinese Jun porcelain. Two modern Ru porcelain samples are similar to the ancient Chinese Ru porcelain, but another one drifts apart from the ancient Chinese Ru porcelain. Jingdezhen porcelain has no relation to Ru porcelain and Jun porcelain

Socio-Economic Factors’ Impact on the Offline Networking: A Quantitative Analysis of Albanian Business

Directory of Open Access Journals (Sweden)

Besa Shahini

2016-05-01

Full Text Available It exists so many studies and research on networks, especially on business networks, but still there is a little research which explores the factors that influence a manager's’ willingness to participate in business networks. Some of the socio-economic factors that moderate this participation are explored through this paper and the focus is based on offline face-to-face networking activities between companies, especially in an Albanian context. The research findings shows how the socio-economic factors such as gender, age, position and education level, influence the participation of such a business network moderated by the personal networking behavior of an individual. The study is based on a quantitative analysis of Albanian business member of the business networks. The results suggest that these socio –economic effects are important, but they do not come first in the perception of the process. What is important, the analysis, furthermore, finds that personal behavior and attitude are to be considered as key issues when it comes to participation in offline business networks.

Xeroradiography: A key to the nature of technological change in ancient ceramic production

Energy Technology Data Exchange (ETDEWEB)

Glanzman, W D; Fleming, S J

1986-01-15

Over the last two decades Industry and Medicine have developed and fully exploited various X-ray techniques, especially xeroradiography. It is only recently, however, that the latter has found significant use in museum-related disciplines, the appeal being that it is nondestructive in its usual mode of application. Though the production of xeroradiographic images has been largely constrained to situations where the X-ray beam incidence is normal to the object's surface - we will illustrate that information recovery is not optimized in that configuration - some valuable data has been gleaned about certain characteristic features of ceramic structure. For example, the frequency, grain structure and gross aspects of rock and mineral inclusions are often radiographically distinct, when their effective atomic number is significantly different from the surrounding clay matrix. (Haematite, muscovite and calcite show up particularly clearly). Similarly, remnants of organic matter, such as any rice or straw temper that the potter may have added, produce quite distinct images. We have now adapted routine xeroradiographic methods to accurately reconstruct the method of manufacture of individual pottery vessel types from a wide range of past cultural horizons. Adjustments in X-ray exposure settings and angles of incidence, coupled to an internal study of certain vessel forms (using a 'thick section' technique that we will describe in detail), has allowed us to identify subtle changes with time in ancient pottery production methods, and has prompted much reassessment of current ideas about technological innovation within several cultures, including those of Bronze Age Jordan and prehistoric Thailand. This paper will summarize the technical aspects of these changes, and consider the past social conditions which may have stimulated them.

Kosovo education development in Albanian language during the years 1878- 1918

OpenAIRE

Fahredin Shabani; Artan Reshani

2017-01-01

Albania has one of the most specific histories, among all European Nations. Albanians have found themselves under the pressure of different wars for centuries, but it did not prevent them to create a rich tradition, in all aspects of life, especially in culture and education. During the National Renaissance, patriots and pedagogues considered education and culture as important factors for the nation's progress, but also as a means for its unity and the preservation of national unity in the st...

Application of INAA to provenance study of ceramics from Baixo Sao Francisco River, Sergipe, Brazil

International Nuclear Information System (INIS)

Santos, J.O.; Munita, C.S.; Toyota, Rosimeiri G.; Vergne, C.

2007-01-01

The study of the physical and chemical characteristics of crafts, in association with historical and archaeological research, has allowed for the reconstruction of ancient community habits. Archaeological studies include several techniques to reconstruct ancient cultures. Since ceramics represent a sophisticated merging of previously separate domains of human knowledge and experience, these objects are studied by means of archaeometric methods. In recent years an interdisciplinary research program was started between Museu Arqueologico de Xingo (MAX) and Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP) to study the ancient ceramist cultures from Xingo region, located in Sergipe, Brazilian Northeast. Recent studies conducted in the area have showed the existence of an independent ceramist group without relation to the ceramist group well established in the Brazilian Northeast, Tupiguarani and Aratu. Instrumental neutron activation analysis, INAA, is a suitable technique for provenance studies. In this work the chemical composition of 103 samples: 30 clays and 73 ceramics from Barracao archaeological site, from Baixo Sao Francisco, were analyzed. This analysis allowed for the definition of compositional groups of ceramics according to the chemical similarities of ceramic paste, which reveals the raw material composition used in the manufacturing process by prehistoric man. The outliers were identified by means robust Mahalanobis distance. The results were interpreted by means of cluster analysis, principal components analysis and discriminant analysis. The results obtained in this work, in association with archaeological information, allowed for the identification of the ceramic groups in relation to the ceramist occupations of the Xingo area. This work contributes for the reconstruction of the Baixo Sao Francisco region communities and for the reconstitution of the Brazilian Northeast ceramist population. (author)

Factors Associated with Physical Activity among Macedonian Adolescents in Albanian Ethnic Community

OpenAIRE

GONTAREV, Seryozha; KALAC, Ruzdija; AMETI, Vullnet; REDJEPI, Agim

2016-01-01

Background: The purpose of this study was to determine the relationship of demographic, psychological, social and environmental factors with physical activity and to determine whether indicators of physical activity differ by gender among Macedonian adolescents from Albanian ethnic community from 11 to 14 yr (N = 886). Methods: Research were conducted in 2014 in several primary schools randomly selected from Tetovo and Gostivar region of the R. Macedonia. Students completed a questionnaire wh...

THREATS OF NEW GENERATION ON PHYSICAL ACTIVITY LEVEL IN ALBANIAN CHILDREN

Directory of Open Access Journals (Sweden)

Juel Jarani

2014-06-01

Full Text Available Introduction: The decline in physical activity levels of young children appears to be increased and combined with a high prevalence of obesity in Europe (Wang and Lim, 2012; Lobstein et al., 2004. With the ever-increasing interest in exploring the actual level of children’s physical activity in Albania, a study was carried out aiming to obtain the actual level on physical activity. Methods: A cross-sectional study was conducted on 9003 children aged 7-year-old to 15-year-old (4513 boys and 4490 girls. The PAQ-C questionnaire was validated in Albanian language and used to assess the current level of PA. Results: The results showed that 42.7% of children fell below the normal level of PA (inactivity. Data split by gender showed a higher percentage of inactivity among girls (49.6% compared to boys (36%. Finally, the results revealed a higher percentage of inactive children living in rural areas (49.2% compared to children in urban areas (45.4%. Discussion: In conclusion, the high percentage of inactive children poses a threat for increased obesity in Albanian children. Another concern emphasized the inactivity in rural areas due to the changes of their lifestyle and behavior. References: Lobstein T, Baur L, Uauy R and Isoiot (2004. Obes Rev, 5 (Suppl 1, 4–104. Wang Y and Lim H (2012. Int Rev Psychiatry, 24(3, 176–88.

The "7 Keys of the Dragon": An E-Learning Gamelike Environment for Albanian and Russian

Science.gov (United States)

Revithiadou, Anthi; Kourtis-Kazoullis, Vasilia; Soukalopoulou, Maria; Konstantoudakis, Konstantinos; Zarras, Christos; Pelesoglou, Nestoras

2014-01-01

In this article we report on the development of an interactive open source extensible software, dubbed "The 7 Keys of the Dragon," for the teaching/learning of Albanian and Russian to students (9-12 years old) with the respective languages as their heritage languages. Based on the assumption that games in language learning are associated…

How Albanian Private Universities can use Game Theory for Optimization of Scholarship Offers

OpenAIRE

Llambrini Sota; Fejzi Kolaneci

2013-01-01

There are 46 private universities in Albania. We believe that the tuition fee andscholarship for high GPA students are two important components of the competitionbetween private universities. This study is a first attempt in applying Game Theory foroptimization of scholarship offers by Albanian private universities during academic years.There is a conflict between the utility functions of shareholders to maximize their profitsand the utility functions of the students enrolled in private unive...

The Impact of Real Estate Market in the Albanian Economy

Directory of Open Access Journals (Sweden)

Dorina Kripa

2015-05-01

Full Text Available The real estate market has an important impact on social and economic development of a country, and it involves many aspects which increase the complexity of the impact analysis and often have opposite directions. This can be supported by the fact that real estate is one of the most important items in public spending3, but also in investment expenses in general (this is especially typical for Albania. These expenses are mainly related to infrastructure and accommodation of homeless people by the National Housing Entity. Researchers have studied the relation between the price of real estates with the GDP of a country, concluding that real estate prices and the government policies related to them, do impact the GDP growth, and movements in residential prices can be used to forecast GDP growth. On the other hand, when purchasing a home, individuals use all their savings, or take loans, which constantly cause the reduction of consumption and saving possibilities in order to afford the installments and other loan expenses. So, from this point of view, this investment may have an adverse effect, even on GDP. But, the question we raise in this study is: what impact has the real estate market in Albanian economy? We begin the study by emphasizing the importance of the real estate market, and then we identify key developments related to this market’s financing, price developments and the construction activity, as an important part of the market itself. The study is concluded with a regression analysis on the role the real estate market plays in the Albanian economy.

Determinants of Sustainable Relationships in the Albanian Apple Production Sector

Directory of Open Access Journals (Sweden)

Blendi Gërdoçi

2016-02-01

Full Text Available This paper analyses the behaviour of Albanian apple growers and their relations with buyers based on a structured survey. We develop a model of relational governance that highlights the importance of sustainable (lasting relationships and draws upon different theoretical frameworks such as transaction cost economics and social network theory and focuses on determinants of relational exchange. The findings support the social network argument that the presence of verbal agreements between business partners strongly and positively affects exchange relationships. Asset specificity and competition among buyers also affects such relationships. The results and their implications at the management and policy-making level are discussed in detail

Craft Arts and Tourism in Ceramic Art Village of Kasongan in Yogyakarta

Directory of Open Access Journals (Sweden)

sp gustami

2014-03-01

Full Text Available Yogyakarta is one of Indonesia’s major tourist destinations. This is due to its nature, interesting, unique and fantastic ancient cultural and art sites. Creative industries and the ceramic crafts play an important role in the development of tourism in Yogyakarta. In this paper, ethnographic approach is used to describe the creative process and the ceramic crafts industry in the village of Kasongan, Yogyakarta. Based on the results of the field research, the authors conclude that the ceramic crafts tourist village of Kasongan is moving toward greater commoditization whereby the ceramics centre is now more oriented towards meeting the needs of tourist industry in Yogyakarta. Due to extensive interaction and the positive response from the general public, ceramic crafts practitioners of Kasongan experience unique and characteristic creative period. The crafters manage to negotiate between the old and the new values, in the village one can find both traditional pottery and new, creative and innovative ceramic products of export quality. Today, Kasongan is a trade mark ceramic tourism village that is entering the global era.

A cross-cultural comparison of folk plant uses among Albanians, Bosniaks, Gorani and Turks living in south Kosovo.

Science.gov (United States)

Mustafa, Behxhet; Hajdari, Avni; Pieroni, Andrea; Pulaj, Bledar; Koro, Xhemajli; Quave, Cassandra L

2015-05-12

Kosovo represents a unique hotspot of biological and cultural diversity in Europe, which allows for interesting cross-cultural ethnobotanical studies. The aims of this study were twofold: 1) to document the state of traditional knowledge related to local (esp. wild) plant uses for food, medicine, and handicrafts in south Kosovo; and 2) to examine how communities of different ethnic groups in the region (Albanians, Bosniaks/Gorani, and Turks) relate to and value wild botanical taxa in their ecosystem. Field research was conducted in 10 villages belonging to the Prizren municipality and 4 villages belonging to the Dragash municipality, located in the Sharr Mountains in the southern part of Kosovo. Snowball sampling techniques were used to recruit 139 elderly informants (61 Albanians, 32 Bosniaks/Gorani and 46 Turks), for participation in semi-structured interviews regarding the use of the local flora for medicinal, food, and handicraft purposes. Overall, we recorded the local uses of 114 species were used for medicinal purposes, 29 for food (wild food plants), and 20 in handicraft activities. The most important species used for medicinal purposes were Achillea millefolium L., Sambucus nigra L., Urtica dioica L., Tilia platyphyllos Scop. Hypericum perforatum L., Chamomilla recutita (L.) Rauschert, Thymus serpyllum L. and Vaccinium myrtillus L. Chamomilla recutita was the most highly valued of these species across the populations surveyed. Out of 114 taxa used for medicinal purposes, only 44 species are also included in the European Pharmacopoeia. The predominantly quoted botanical families were Rosaceae, Asteraceae, and Lamiaceae. Comparison of the data recorded among the Albanian, Bosniak/Gorani, and Turkish communities indicated a less herbophilic attitude of the Albanian populations, while most quoted taxa were quoted by all three communities, thus suggesting a hybrid character of the Kosovar plant knowledge. Cross-cultural ethnobiological studies are crucial in

Investigating Differences in Health-Related Quality of Life of Greeks and Albanian Immigrants with the Generic EQ-5D Questionnaire

Directory of Open Access Journals (Sweden)

Eleni Lahana

2013-01-01

Full Text Available Background. Low socioeconomic status (SES has been related by previous studies to low self-perceived HRQoL. Health is a major determinant of the society’s welfare, and few studies have determined the relevant elements that contribute to health and quality of life in Greece. Aim. The aim of the study was to evaluate and test for differences in HRQoL of Greek and Albanian immigrant population according to ethnicity and their demographic and SES characteristics. Methods. The study was conducted in a sample of 660 age-matched and gender-matched Greeks and Albanian immigrants. Moderate or severe decrease in HRQoL was assessed with the generic tool EQ-5D. Differences were statistically analyzed by t-test and ANOVA. Also, logistic and linear regression analyses were conducted for the dependent variables of the EQ-5D dimensions and VAS scores, respectively. Results. The Albanian immigrants reported better self-perceived health than their Greek counterparts. Health problems increase moderately with age and lower SES and are slightly higher for women than for men. Urbanity and superior education in both Greeks and Albaniansareassociated with worse HRQoL. Conclusion. There are some structural and compositional differences in the self-perceived quality of life between the two ethnicities, as estimated by EQ-5D. The combined information presentstopublic health providers the relevant data to assess health policies according to health needs.

Albanian and UK Consumers’ Perceptions of Farmers’ Markets and Supermarkets as Outlets for Organic Food: An Exploratory Study

Directory of Open Access Journals (Sweden)

Athina-Evera Qendro

2015-05-01

Full Text Available The purpose of this paper is to elicit UK and Albanian consumers’ perceptions of food outlets in order to understand their views on supermarkets and farmers’ markets as outlets for organic food. A qualitative research methodology was chosen as the best way to get an in-depth understanding of how consumers of these two different countries understand and evaluate buying organic food from two different food outlets. This exploratory research is a first step to find out how and why organic food is being bought in supermarkets and farmers’ markets. The results show that respondents associated organic with vegetables and fruit, that taste good, are healthy, and are free of pesticides and hormones. The importance of motives varies between the outlets they prefer for buying organic food. An interesting finding is the fact that Albanian respondents refer to the farmers’ markets as the villagers’ market.

Corruption and innovation in the Albanian public procurement system

Directory of Open Access Journals (Sweden)

Reida Kashta

2014-07-01

The question marks that this paper raises are: what are the means used in the war against corruption in the public procurement field in Albania? Did they had any real impact or they just reshaped the ways of doing corruption? The main finding of this paper is that introduction of e-procurement system was one of the most appropriate means to fight corruption in Albania, because this system fixed one of the biggest problems of the Albanian Public Procurement system; lack of transparency. The electronic system is transparent, since it provides the increasing of information passing through it, and the most important, it enhances the responsibility in relations between the contracting authorities and economic operators, enabling a more effective and efficient use of the tax payers’ money.

The construction technology of Chinese ancient city drainage facilities

Science.gov (United States)

Hequn, Li; Yufengyun

2018-03-01

In ancient china, according to the local natural environment, a variety of drainage facilities were built in order to excrete rainwater, domestic sewage, production wastewater and so on. These drainage facilities were mainly made of pottery, bricks, wood, stone, etc. For example, ceramic water pipelines, buried in the ground, connect together one by one, and there was a slight drop from one end to the other in favor of drainage. These measures can also be used for reference in today’s urban drainage and flood control.

Study on Coloration Mechanism of Chinese Ancient Ceramics by X-ray Absorption Near-edge Structure

Science.gov (United States)

Peng, Y. H.; Xie, Z.; He, J. F.; Liu, Q. H.; Pan, Z. Y.; Cheng, W. R.; Wei, S. Q.

2013-04-01

The Fe K-edge X-ray absorption near-edge structure (XANES) spectra of a series of ceramic shards were measured by fluorescence mode to reveal the color-generating techniques of Chinese porcelain. The analysis disclosed relationships among the chemical form of the iron, the firing conditions and the colors of the ceramics. The results indicate that the coloration for different ceramics depend on the valence states of iron as the main color element in glaze and the proportion of Fe2+ and Fe3+ was attributed to the baking technology. The findings provide important information for archaeologist on the coloration researches.

Homogeneity test of the ceramic reference materials for non-destructive quantitative

International Nuclear Information System (INIS)

Li Li; Fong Songlin; Zhu Jihao; Feng Xiangqian; Xie Guoxi; Yan Lingtong

2010-01-01

In order to study elemental composition of ancient porcelain samples, we developed a set of ceramic reference materials for non-destructive quantitative analysis. In this paper,homogeneity of Al, Si, K, Ca, Ti, Mn and Fe contents in the ceramic reference materials is investigated by EDXRF. The F test and the relative standard deviation are used to treat the normalized net counts by SPSS. The results show that apart from the DY2 and JDZ4 reference materials, to which further investigation would be needed, homogeneity of the DH, DY3, JDZ3, JDZ6, GY1, RY1, LQ4, YJ1, YY2 and JY2 meets the requirements of ceramic reference materials for non-destructive quantitative analysis. (authors)

Zooming Albanian factor in the nineteenth century through Western lenses

Directory of Open Access Journals (Sweden)

MA. Arben Salihu

2016-01-01

Full Text Available The developments of the nineteenth century were determining for the history of Balkan region as it shaped the future of many generations to come, resulting in (mainly growing discontents that led to several wars during the last century. It was beginning of the decay of the Ottoman Empire that many longed for, and many nations used every opportunity to take a full advantage of it. The aim of this work is to explore exclusively (only Western sources in an attempt to provide, as much as possible, an objective and neutral picture. Therefore, the idea behind the decision to examine non-Balkan sources is impartiality, in order to bring the reader as close as possible to the reality of the nineteenth century. A number of nineteenth century books, magazines and newspapers of the time, by respective Western authors, are explored and analysed. Reading and examining a large volume of data and information of this period, offers a unique sense of feeling, similar to that of living the nineteenth century world. Albanians, who have historically populated the heart of Balkans, are focal point of this region (in many of the regional and international sources for this particular period, vis-à-vis the Ottoman governance as well as relations with other regional neighbours. Their contribution to the history of nations in the region was unquestionably critical, but their conduct in relations to their own cause has produced an unproductive image, portrayed often with confused and incomprehensible deeds. By using authentic sources of the time, the study intends to develop arguments on many points raised, like population and religion. This work also touches briefly the sensitive issue of education in the region and initial Albanian inputs in the history of Balkan education map. Finally the study concludes that Albanians’ altruism and largely visionless focus, produced a relatively expected detrimental outcome.

Socio-Economic Factors’ Impact on the Offline Networking: A Quantitative Analysis of Albanian Business

OpenAIRE

Besa Shahini

2016-01-01

It exists so many studies and research on networks, especially on business networks, but still there is a little research which explores the factors that influence a manager's’ willingness to participate in business networks. Some of the socio-economic factors that moderate this participation are explored through this paper and the focus is based on offline face-to-face networking activities between companies, especially in an Albanian context. The research findings shows how the ...

Moessbauer studies on ancient pottery from a neolithic site in Tung Wan, Hong Kong

International Nuclear Information System (INIS)

Zheng Yufang; Tang Chung

1994-01-01

Twelve ceramic sherds unearthed from different archaeological layers at a neolithic site in Tung Wan, Hong Kong, were studied by means of X-ray diffraction (XRD) and Moessbauer spectroscopy. The results show that the firing techniques used for ancient pottery wares at different layers were very different. For the oldest sherds (4000-3000 B.C.) from layer No. 4, the original firing temperature was low and craftmanship was inferior. For the sherds (1650-250 B.C.) from layer No. 2, the original firing temperature was above 1000 C. In addition, the results indicate that the ancient pottery wares from the ruins might not have been manufactured in the Tung Wan region. (orig.)

Chants of the Byzantine Rite: the Italo-Albanian Tradition in Sicily / Canti Ecclesiastici della Tradizione Italo-Albanese in Sicilia

DEFF Research Database (Denmark)

Troelsgård, Christian; Garofalo, Girolamo

Chants of the Byzantine Rite: The Italo-Albanian Tradition in Sicily offers for the first time transcriptions of the full repertory of orally transmitted hymns for the celebration of the Byzantine Rite in Sicily. This little-known chant tradition has without interruption been cultivated by the Al...

Language and Law seen through “Canon of Laberia” Greek - Albanian terminological words

OpenAIRE

Marina Kaishi

2018-01-01

Law and language are linked together. If we use a direct language to express law, it will be more understandable for the audience. If we interpret it in the right way, again the audience will better understand law. Moreover if we interpret it right, even the verdict will be disposed the right way. According to the legal terminology, we are interested to the words that Albanian language has taken from Greek language. I am not speaking about modern times, but if we see back in time there are a ...

ON THE DEVELOPMENT OF THE ALBANIAN INFORMAL ECONOMY

Directory of Open Access Journals (Sweden)

Majlinda BELLO

2011-01-01

Full Text Available The purpose of the paper is to analyze the informal economy in Albania. The measurement of informal economy may be realized through direct and indirect methods. The collection of data about informal economic activities, the frequency and the volume of the underground activities present a challenge, because of the data limitations. Therefore, to measure it used more indirect methods. Albanian governments have always adopted a philosophy that aims to formalize the economy through legal and institutional improvements, reducing taxes, fighting corruption and tax evasion; improvement in revenue collection from customs and taxes in general, improving governance and increasing efficiency of public institutions. Albania is on the way of the integration in the EU. The integration perspective should be supported by concrete politics on the improvement of government functioning and decrease of the informal sector, so that the people think that their country is on the right way toward modernization and prosperity.

Working conditions, work style, and job satisfaction among Albanian teachers

Science.gov (United States)

Kloep, Marion; Tarifa, Fatos

1994-03-01

For the first time in Albania, a large-scale study investigating teachers' working conditions was conducted. 349 teachers from many parts of the country and from all school levels answered an extensive questionnaire, providing a comprehensive description of their working situation. As data for parts of the study exist from the USA, Germany, Singapore, England, and Poland, results could be discussed in comparison to the conditions in these countries, showing that self-reported job satisfaction and engagement in effective classroom practices is relatively high among Albanian teachers, while the economic and physical conditions are bad. Stepwise regression analyses reveal that the items measuring professional autonomy account for a considerable part of the variance of the job satisfaction measure; while work efficiency is mainly predicted by items measuring social support and, again, professional autonomy.

Characterization of ancient ceramic tiles using XRF = = = =

International Nuclear Information System (INIS)

Ben Abdelwahed, Haifa

2002-01-01

The measurement of energies and intensities of fluorescent X-rays emitted from a given material when atoms are bombarded with suitable projectiles like electrons, protons, particles or photons has been successfully used for non-destructive elemental analysis in many applications, especially in the analysis of ceramic glasses. Use of radioisotopes as a source of excitation radiation in combination with high resolution semiconductor detectors in x-ray fluorescence has found wide applications in elemental analysis. A radioisotope excited X-ray fluorescence spectrometer consisting of a standard 5.45mm Si(Li) detector having a resolution of 200 eV at 5.9 keV coupled to a TRUMP-8K multichannel analyzer has been used. Tow sources of annular geometry using 10 mCi 109Cd and 10 mCi 55Fe together with PC AXIL software have been used for this study of tile-pavement glasses of ''Ksar Said'' in Tunisia. Analytical data shows that those tile pavement witch are broken in the 19th century from France (Marseille) have not the same composition of Tunisian tile pavement. Referring to our data, The kind of that analyzed glasses is of alkaline lead. we found also, through this study, the elemental compositions of different pigments (green, blue, brownish, yellow, white and red) used to color that tile-pavement glasses. (author). 21 refs

Resilience at the border: traditional botanical knowledge among Macedonians and Albanians living in Gollobordo, Eastern Albania

Science.gov (United States)

2014-01-01

Background Ethnobotany in South-Eastern Europe is gaining the interest of several scholars and stakeholders, since it is increasingly considered a key point for the re-evaluation of local bio-cultural heritage. The region of Gollobordo, located in Eastern Albania and bordering the Republic of Macedonia, is of particular interest for conducting ethnobiological studies, since it remained relatively isolated for the larger part of the 20th Century and is traditionally inhabited by a majority of ethnic Macedonians and a minority of Albanians (nowadays both sharing the Muslim faith). Methods An ethnobotanical survey focused on local food, medicinal, and veterinary plant uses was conducted with 58 participants using open and semi-structured interviews and via participant observation. Results We recorded and identified 115 taxa of vascular plants, which are locally used for food, medicinal, and veterinary purposes (representing 268 total plant reports). The Macedonian Traditional Ecological Knowledge (TEK) was greater than the Albanian TEK, especially in the herbal and ritual domains. This phenomenon may be linked to the long socio-cultural and linguistic isolation of this group during the time when the borders between Albania and the former Yugoslavia were completely closed. Moreover, the unusual current food utilisation of cooked potatoes leaves, still in use nowadays among Macedonians, could represent the side effect of an extreme adaptation that locals underwent over the past century when the introduction of the potato crop made new strategies available for establishing stable settlements around the highest pastures. Additionally, the difference in use of Helichrysum plicatum, which is popular in the local Macedonian folk medicine but absent among Albanians, confirms the particular significance of this taxon as it relates to the yellow colour of its flowers in South Slavic folklore. Conclusion Botanical studies with an ethnographic approach are crucial for

Early Pottery Making in Northern Coastal Peru. Part IV: Moessbauer Study of Ceramics from Huaca Sialupe

International Nuclear Information System (INIS)

Shimada, I.; Haeusler, W.; Jakob, M.; Montenegro, J.; Riederer, J.; Wagner, U.

2003-01-01

We report on an interdisciplinary study of ceramic material excavated in 1999 and 2001 at a 1000-year old ceramic and metal production site, located at Huaca Sialupe in the La Leche valley on the north coast of Peru and dating to the Middle Sican period (AD 900-1100). Sherds of Sican red- and blackware, numerous moulds, several kilns and other evidence of pottery making were found. The pottery, in particular, is famous for its fine texture and perfect black surface finish. In addition, some clay lumps and sherds of unfired Sican pottery were excavated. Within the same workshop several large inverted ceramic urns used as furnaces were found together with Middle Sican metal working tools and debris. Various physical methods were applied to investigate this material. The ancient firing procedures could be elucidated by comparing the spectra observed for the ancient sherds with model spectra of laboratory and field fired clay samples. This shows that the fine ware made at Huaca Sialupe was intentionally fired under strongly reducing conditions at temperatures up to 900 o C. Reoxidation at the end of the reducing firing took place only occasionally. Less care was taken in firing moulds used for pottery making.

Macro-economic model of aggregate market in the Albanian economy, and relevant problems thereto

Directory of Open Access Journals (Sweden)

Dr.Sc. Alqi Naqellari

2011-12-01

Full Text Available This paper uses concrete data obtained on the Albanian economy to analyse the positions of aggregate demand/supply curves in the economy. As examples from micro-economics, we have taken the models of Ŵalras and Marshall, to view the possibilities of achieving an economic equilibrium. Data available from the Albanian economy, and from the global economic trends generally, have shown that the positions of curves are such, with differences in their inclination, while the classic position of the aggregate demand curve, with a negative trend, studied in the macro-economic theory, is unique. Therefore, our objective is to try and show the scholars of the field that the macro-economic problems must be viewed in this light, and not through the static scheme used so far. The equilibrium is met not only when the aggregate demand and aggregate supply curves are met, meaning when the aggregate expenditure are equal to aggregate production, but it exists at every moment, independently of whether it is consistent or not, while the pricing trends continue to increase, similar to two other aggregates. The understanding of such a situation should give the possibility to governments and other policy-making institutions to review their positions and relations with monetary and fiscal indicators, in a view of making the organic connection, and increasing their working effectiveness. The paper aims to show how one can define the relation between monetary and fiscal policies necessary to see their role and relevance in the economic growth of a country.

Reported maternal styles and substance use: a cross-sectional study among educated Albanian young adults.

Science.gov (United States)

Kalyva, Efrosini; Melonashi, Erika

2014-05-01

The study explored a predictive model of substance use including perceived maternal parenting style, age and gender. Participants were 347 Albanian young adults (144 males and 203 females) aged 18 to 28 years. They completed the Parental Authority Questionnaire and the Adolescent Alcohol and Drug Involvement Scale. Gender, perceived authoritative maternal style, and age predicted a proportion of substance use involvement. Gender and perceived authoritative maternal style also predicted the proportion of young people at risk for substance use or abuse. Implications of the findings and limitations of the study are discussed.

Early Pottery Making in Northern Coastal Peru. Part IV: Mössbauer Study of Ceramics from Huaca Sialupe

Science.gov (United States)

Shimada, I.; Häusler, W.; Jakob, M.; Montenegro, J.; Riederer, J.; Wagner, U.

2003-09-01

We report on an interdisciplinary study of ceramic material excavated in 1999 and 2001 at a 1000-year old ceramic and metal production site, located at Huaca Sialupe in the La Leche valley on the north coast of Peru and dating to the Middle Sicán period (AD 900-1100). Sherds of Sicán red- and blackware, numerous moulds, several kilns and other evidence of pottery making were found. The pottery, in particular, is famous for its fine texture and perfect black surface finish. In addition, some clay lumps and sherds of unfired Sicán pottery were excavated. Within the same workshop several large inverted ceramic urns used as furnaces were found together with Middle Sicán metal working tools and debris. Various physical methods were applied to investigate this material. The ancient firing procedures could be elucidated by comparing the spectra observed for the ancient sherds with model spectra of laboratory and field fired clay samples. This shows that the fine ware made at Huaca Sialupe was intentionally fired under strongly reducing conditions at temperatures up to 900°C. Reoxidation at the end of the reducing firing took place only occasionally. Less care was taken in firing moulds used for pottery making.

Ancient mitogenomics

DEFF Research Database (Denmark)

Ho, Simon Y. W.; Gilbert, Tom

2010-01-01

the technical challenges that face researchers in the field. We catalogue the diverse sequencing methods and source materials used to obtain ancient mitogenomic sequences, summarise the associated genetic and phylogenetic studies that have been conducted, and evaluate the future prospects of the field.......The mitochondrial genome has been the traditional focus of most research into ancient DNA, owing to its high copy number and population-level variability. Despite this long-standing interest in mitochondrial DNA, it was only in 2001 that the first complete ancient mitogenomic sequences were...... obtained. As a result of various methodological developments, including the introduction of high-throughput sequencing techniques, the total number of ancient mitogenome sequences has increased rapidly over the past few years. In this review, we present a brief history of ancient mitogenomics and describe...

Study of provenance properties on ancient porcelain of Yue Kiln at Si-long-kou with NAA

International Nuclear Information System (INIS)

Feng Songlin; Fan Dongyu; Feng Xiangqian; Cheng Lin; Lei Yong; Xu Qing; Quan Huishan; Shen Yueming; Zhou Zhexi; Zhang Wenjiang

2005-01-01

Chinese ancient porcelain history has lasted about three thousands years from Shang Dynasty (1100∼1600 BC). A large amount of ancient porcelain sherds with accuracy provenance and ages were excavated from a lot of kiln sites in China. Archaeologists and ceramic experts have recognized and researched it with excavated stratum, utensil shape, body quality, glaze color and painting pattern. However, the appearance characteristic of some ancient porcelain manufactured in different kilns is similar. Therefore, it is still difficult to identify the provenance and ages of the samples excavated from some sites using traditional methods. Up, to now, many problems of Chinese ancient porcelain are confused for archaeologist and collecting experts. The elemental composition of ancient porcelain shows certain information of provenance and age. Especially, the sorts and contents of the elements in porcelain didn't change, so it is very useful to determine the provenance of ancient porcelain with elemental composition characteristics. Provenance characteristic is the important scientific information to identify ancient porcelain wares excavated from sites and graves. The porcelain samples of Si-Long-Kou Yue kiln in Zhejiang Province of china have been analyzed with NAA in this paper. The provenance characteristic was compared with it of Hong-Zhou kiln of Jiang-Xi Province and Yao-Zhou kiln of Shan-Xi Province. The experimental data were studied with statistic methods. The results show that the chemical compositions of porcelain body samples for three kilns were different. The difference was been able identified. The porcelain body materials of both Si-Long-Kou Yue kiln and Hong-Zhou kiln of Jiang-Xi were similar. The samples of Yao-Zhou kiln in north of China existed obvious difference.

Physicochemical characterization of ceramics from Sao Paulo II archaeological site

International Nuclear Information System (INIS)

Ribeiro, Rogerio Baria

2013-01-01

Archaeometry is a consolidated field with a wide application of nuclear analytical techniques for the characterization, protection, and restoration of archaeological pieces. This project aimed at studying the elementary chemical composition of 70 ceramic fragments samples from Sao Paulo II archaeological site, located along the Solimoes River channel, next to Coari city, in Brazilian Amazon. The characterization of samples was performed by neutron activation analysis (NAA). By the determination of 24 elements in the ceramic fragments ( Ce, Co, Cr, Cs, Eu, Fe, Hf, K, La, Lu, Na, Nd, Sb, Sm. Rb, Se, Ta, Tb, Th, U, Yb and Zn), it was possible to define groups of samples regarding the similarity/dissimilarity in elementary chemical composition. For such a task, the multivariate statistical methods employed were cluster analysis (C A), principal component analysis (PCA) and discriminant analysis (DA). Afterwards, seven ceramic fragments were selected based on the groups previously established, for the characterization of the site temporal horizon. Those ceramic fragments were analyzed by thermoluminescence (TL) and EPR for dating purposes. The firing temperatures were determined by electron paramagnetic resonance (EPR) technique, in order to infer about some aspects of the ceramic manufacture employed by the ancient peoples that lived in Sao Paulo 11. By the results obtained in this study, it was possible to identify the quantity of clay sources employed by the ceramists and the age of the ceramic pieces. Therefore, the results of this research may contribute to the study on the occupation dynamics in the pre-colonial Brazilian Amazon. (author)

Ancient DNA

DEFF Research Database (Denmark)

Willerslev, Eske; Cooper, Alan

2004-01-01

ancient DNA, palaeontology, palaeoecology, archaeology, population genetics, DNA damage and repair......ancient DNA, palaeontology, palaeoecology, archaeology, population genetics, DNA damage and repair...

An Investigation of the Essential Factors on Customer Loyalty in Banking Sector: A Case of Albanian Retail Bank

OpenAIRE

Yüksel KÖKSAL; Oneda DEMA

2014-01-01

The purpose of this research is to reveal essential factors that have influences on customer loyalty directly in Albanian retail banking context. In order to bring out essential factors, we have developed a questionnaire and 410 people participated in the survey. Five different factors have been described to analyze their directly impacts on customer loyalty such as Service, Security, Relationship, Reliability and Staff. The significant relations of each factor with customer loyalty have been...

Did the ancient Egyptians migrate to ancient Nigeria?

Directory of Open Access Journals (Sweden)

Jock M. Agai

2014-01-01

Full Text Available Literatures concerning the history of West African peoples published from 1900 to 1970 debate�the possible migrations of the Egyptians into West Africa. Writers like Samuel Johnson and�Lucas Olumide believe that the ancient Egyptians penetrated through ancient Nigeria but Leo�Frobenius and Geoffrey Parrinder frowned at this opinion. Using the works of these early�20th century writers of West African history together with a Yoruba legend which teaches�about the origin of their earliest ancestor(s, this researcher investigates the theories that the�ancient Egyptians had contact with the ancient Nigerians and particularly with the Yorubas.Intradisciplinary and/or interdisciplinary implications: There is an existing ideology�amongst the Yorubas and other writers of Yoruba history that the original ancestors of�the Yorubas originated in ancient Egypt hence there was migration between Egypt and�Yorubaland. This researcher contends that even if there was migration between Egypt and�Nigeria, such migration did not take place during the predynastic and dynastic period as�speculated by some scholars. The subject is open for further research.

Lost in Implementation: EU Law Application in Albanian Legal System

Directory of Open Access Journals (Sweden)

Hajdini Bojana

2017-06-01

Full Text Available Considering the growing importance of the researchers in the area of Europeanization in the candidate countries, the purpose of this paper is to analyse whether, and to what extent EU as a legal normative power has influenced Albania to approximate existing and future legislation and to ensure proper implementation. The paper argues that the Europeanization process is pushing Albania toward greater convergence with EU acquis by developing a modern legal framework. However, the paper points out that weak implementation has hampered the application of EU law in Albania due to: a weak bureaucracy or uneven distribution of human capacities; b the lack of an established practice of consultation with interest groups on specific draft legislation, and c the inability to put in sound planning mechanisms and to carry out a realistic assessment. The paper concludes that effective adjustment of Albanian legal system with EU norms requires cooperation between different actors involved in the approximation and implementation process.

Ancient Wall Tiles – The Importance of the Glaze/Ceramic Interface in Glaze Detachment

Directory of Open Access Journals (Sweden)

Marisa COSTA

2014-04-01

Full Text Available One of the most severe pathologies suffered by early industrially produced tiles in Portugal in late nineteenth century is glaze detachment in wall tiles placed in the lower part of the façade. It is known that salts crystallize provoking the glaze detachment, destroying the waterproofing and the beauty of the wall tile and this is one of the crucial factors towards this occurrence. The present work questions the importance of the thickness of glaze/ceramic body interface, in what concerns glaze detachment provoked by salt crystallization. SEM-EDS was used to perform all the observations that lead to the conclusion that the exuberance of the interface between glaze and ceramic body has no influence in the resistance of the glaze to salt crystallization though time, being the porous network more determinant. DOI: http://dx.doi.org/10.5755/j01.ms.20.1.3815

Report on the IAEA-CU-2006-06 proficiency test on the determination of major, minor and trace elements in ancient Chinese ceramic

International Nuclear Information System (INIS)

Shakhashiro, A.; Trinkl, A.; Toervenyi, A.; Zeiller, E.; Benesch, T.; Sansone, U.

2006-10-01

ancient Chinese ceramic, to assure that the conclusions of art objects studies are based on reliable and validated nuclear analytical results and to ensure the comparability of the results of different countries. An ancient Chinese ceramic reference material, prepared and characterized for major, minor and trace elements, by the Institute of High Energy Physics, Chinese Academy of Sciences, was used in the proficiency test. The test material was distributed to the participating laboratories in February 2006 and the deadline for receiving the results was set at 7 August 2006. The participating laboratories were requested to analyse the samples employing the methods used in their routine work, so that their performance on the test samples could be directly related to the real performance of the laboratory. Each laboratory was given a confidential code to assure the anonymity of the evaluation results. 24 laboratories from the 37 initially registered reported their results to the IAEA. The analytical results of the participating laboratories were compared with the reference values assigned to the reference material, and a rating system was applied

Microchemical and microstructural characterisation of medieval and post-medieval ceramic glaze coatings

Science.gov (United States)

Alaimo, R.; Bultrini, G.; Fragalà, I.; Giarrusso, R.; Montana, G.

A large number of ceramic samples (from the 10th to the 19th century), found during the excavation of Sicilian archaeological sites (Syracuse, Caltagirone, Sciacca and Piazza Armerina), have been studied by combining scanning electron microscopy, energy-dispersive X-ray spectrometry and optical microscopy. Attention has been focused on the microchemical and microstructural properties of the painted surfaces to investigate the nature of the enamels and pigments in the decorative layers. The general perspective has been the identification of consistent archeometric criteria, other than the standard stylistic considerations, which can be used for a reliable recognition of the production sites. The results collected for each ceramic typology were used to cluster the different ceramic reference groups in a wide database suitable for a reliable discrimination of the provenance of artefacts. Moreover, the same compositional and microstructural data allow the identification of the raw materials used for pigments. There is evidence of some differences with existing information found in the literature concerning the formulas used in ancient times. Finally, attention has also been devoted to identify the technological aspects of the manufacturing techniques and firing conditions adopted for each typology of glaze coating depending on different ceramic materials .

Finding Similarities in Ancient Ceramics by EDXRF and Multivariate Methods

International Nuclear Information System (INIS)

Civici, N.; Stamati, F.

1999-01-01

We have studied 39 samples of fragments from ceramic roof tiles with different stamps(Diamalas and Heraion), dated between 330 to 170 BC and found at the archaeological site of Dimales, some 30 km from the Adriatic coast. The data from these samples were compared with those obtained from 7 samples of similar objects and period with the stamp H eraion , found at the archaeological site of APOLLONIA. The samples were analyzed by energy-dispersive X -ray fluorescence(EDXRF), using of the x-ray lines of the elements to the intensity of the Compton peak. The results have been treated with diverse multivariate methods. The application of hierarchical cluster analysis and factor analysis permitted the identification of two main clusters. The first cluster is composed from the ''Heraion'' samples discovered in Apollonia, while the second comprises all the samples discovered in Dimale independent of their stamp. (authors)

The Rights of Intersex Persons to Establish a Family under Albanian Law. Practice of the ECHR

Directory of Open Access Journals (Sweden)

Dr.Sc. Jorida Xhafaj

2015-12-01

Full Text Available identity is the way in which a person is self-identified with a gender category, as for example to be female or male, or in some cases intersex, which is none of the distinguishable biological sexes. In principal, intersex persons are part of the society with their rights and obligations, which are not the same with those of the other members of society, in special areas of life. This paper aims to treat the right of intersex persons to marriage and to establish a family. The paper begins with an overview of definition of intersex persons, their rights, and focuses primarily on the right to establish a family. The right for a family life has found protection in the Albanian national legislation. The Constitution of theRepublicofAlbaniaof 1998 in its Article 53 stipulates that "everyone has the right to marry and have a family" establishing the principle of equality before the law, closely linked to the principle of non-discrimination. The legal provisions set a controversial position on the right to get married and to establish family relationships of the intersex persons, which is based on different arguments. For the purposes of the research, we aim also to compare the national legislation with the European principles and practice of the European Court of Human Rights (hereinafter referred as ECHR. The paper also includes the opinions and recommendations of Albanian institutions, as well as those of foreign ones, mainly European, in the area of human rights protection, and especially regarding the rights of the intersex persons.

Ancient Resistome.

Science.gov (United States)

Olaitan, Abiola Olumuyiwa; Rolain, Jean-Marc

2016-08-01

Antibiotic resistance is an ancient biological mechanism in bacteria, although its proliferation in our contemporary world has been amplified through antimicrobial therapy. Recent studies conducted on ancient environmental and human samples have uncovered numerous antibiotic-resistant bacteria and resistance genes. The resistance genes that have been reported from the analysis of ancient bacterial DNA include genes coding for several classes of antibiotics, such as glycopeptides, β-lactams, tetracyclines, and macrolides. The investigation of the resistome of ancient bacteria is a recent and emerging field of research, and technological advancements such as next-generation sequencing will further contribute to its growth. It is hoped that the knowledge gained from this research will help us to better understand the evolution of antibiotic resistance genes and will also be used in drug design as a proactive measure against antibiotic resistance.

Exploring Ancient Skies A Survey of Ancient and Cultural Astronomy

CERN Document Server

Kelley, David H

2011-01-01

Exploring Ancient Skies brings together the methods of archaeology and the insights of modern astronomy to explore the science of astronomy as it was practiced in various cultures prior to the invention of the telescope. The book reviews an enormous and growing body of literature on the cultures of the ancient Mediterranean, the Far East, and the New World (particularly Mesoamerica), putting the ancient astronomical materials into their archaeological and cultural contexts. The authors begin with an overview of the field and proceed to essential aspects of naked-eye astronomy, followed by an examination of specific cultures. The book concludes by taking into account the purposes of ancient astronomy: astrology, navigation, calendar regulation, and (not least) the understanding of our place and role in the universe. Skies are recreated to display critical events as they would have appeared to ancient observers—events such as the supernova of 1054 A.D., the "lion horoscope," and the Star of Bethlehem. Explori...

Neutron activation analysis of Lerna ceramics (Greece) at Early Bronze Age: local production and trade exchanges

International Nuclear Information System (INIS)

Attas, M.

1980-01-01

Neutron activation analysis is a powerful tool for determining the provenance of ancient ceramics. A sophisticated analytical system for gamma-ray spectrometry, designed specifically for the chemical analysis of ceramics by thermal neutron activation, was used to determine the concentrations of twenty elements in samples of ancient pottery. The measurements were made relative to the standard pottery of Perlman and Asaro. The purpose of the work was to study the production of fine pottery at the settlement of Lerna, in the Argolid of Greece, during the Early Bronze Age (third millennium BC). About half of the 50 samples analysed formed the major compositional group, which was attributed to Lerna. It included, besides the majority of the samples from the second phase of the Early Bronze Age (Lerna III), several samples from the third phase (Lerna IV); that is, from levels immediately succeeding the great destruction which marks the end of the Lerna III settlement. A small number of objects forms a second group of local origin and includes 4 of the 5 clay sealings sampled. Among the archaeologically unusual objects, several could be attributed to Lerna, while others were characterized as imports [fr

A phase-transition model for the rise and collapse of ancient civilizations: A pre-ceramic Andean case study

Science.gov (United States)

Flores, J. C.

2015-12-01

For ancient civilizations, the shift from disorder to organized urban settlements is viewed as a phase-transition simile. The number of monumental constructions, assumed to be a signature of civilization processes, corresponds to the order parameter, and effective connectivity becomes related to the control parameter. Based on parameter estimations from archaeological and paleo-climatological data, this study analyzes the rise and fall of the ancient Caral civilization on the South Pacific coast during a period of small ENSO fluctuations (approximately 4500 BP). Other examples considered include civilizations on Easter Island and the Maya Lowlands. This work considers a typical nonlinear third order evolution equation and numerical simulations.

Serbs as threat the extreme negative portrayal of the Serb “minority” in Albanian-language newspapers in Kosovo

Directory of Open Access Journals (Sweden)

Zdravković-Zonta Helena

2011-01-01

Full Text Available Through perpetuating negative stereotypes and rigid dichotomous identities, the media play a significant part in sustaining conflict dynamics in Kosovo. Examining their discourse in terms of ideological production and representations is crucial in order to understand the power relations between the majority and the minority, the identity politics involved in sustaining them, and the intractability of the conflict. In an effort to provide a deeper understanding of the intractable conflict in Kosovo, and the role of the media in protracting it, this study uses critical discourse analysis to examine articles related to issues affecting the Serb community, published in Albanian language print media. The master narrative that comes out of the analysis is that of “threat” - the threat that Kosovo Albanians continue to face from Serbs and Serbia; a threat that is portrayed as historical and constant. The discourse further strengthens the conflict dynamics of opposition, polarization and even hatred. This master narrative implies that Serbs are enemies, to be feared, contested, fought against; conflict is thus the normal state of affairs. The study also looks at the implications of media discourse for reconciliation efforts and the prospects of the Serb minority in Kosovo society, arguing that when the Other is presented as dangerous and threatening, fear of the Other and a desire to eliminate the threat, physically and symbolically, become perceived as a “natural” response, and thus constitute a significant conflict-sustaining dynamic.

The frequency of genotypes for the SNP Ser/Ser in the studied population of Albanian women is higher in the Balkan region

Directory of Open Access Journals (Sweden)

Zafer Gashi

2016-08-01

Full Text Available In women undergoing natural cycles, just one oocyte is usually selected for ovulation, yet routine clinical techniques to support the development of multiple follicles using additional gonadotrophins result in numerous ovulations. Several parameters have been postulated as predictors of ovarian response (inhibin B, 17-β-estradiol and antiMüllerian hormone. Nevertheless, the FSH level on the day 3 of menstrual cycle remains, the most widely used biomarker due to its low cost, although, the genetic background of individuals seems to determine the response of patients to rFSH stimulation better than the stimulation design. Consequently, the variants of FSHR were explored and they may be involved in the role of FSH receptor in mediated signal transduction and with ovarian response in infertile women submitted to ovarian stimulation. In this study we examined, for the first time, the prevalence of genotype variants Asn680Ser in population Albanian women from Kosovo Dukagjin region who took part in IVF / ICSI program. The frequencies of the Asn680Ser genotype variants were as follows: Asn/Asn 22.1%, Asn/Ser 47.1%, and Ser/Ser 30.8%, respectively (Table 1. bE2 levels between the three genotype variants showed slight but statistically significant difference (p= 0.0308. No difference was also found between the genotype groups either in terms of AFC, amount of the FSH required for ovulation induction, stimulation length days, number of dominant follicles, oocyte retrieval number or endometrial thickness (Table 2. BMI was significantly higher in the Ser/Ser group as compared to those from the Asn/Ser or the Asn/Asn group (p= 0.0010 (Table 2. In the study population of Albanian women Dukagjin region of Kosovo had a higher incidence of Ser / SER genotype compared to Asn / Asn genotype. Our research results in the Albanian population differ from published data for other ethnic groups in the Balkans.

Ancient genomes

OpenAIRE

Hoelzel, A Rus

2005-01-01

Ever since its invention, the polymerase chain reaction has been the method of choice for work with ancient DNA. In an application of modern genomic methods to material from the Pleistocene, a recent study has instead undertaken to clone and sequence a portion of the ancient genome of the cave bear.

High-resolution dating of ancient ceramic kilns in Thailand, Laos and Burma by radiocarbon and palaeomagnetism

International Nuclear Information System (INIS)

Barbetti, M.; Hein, D.

1997-01-01

Full text: Radiocarbon dating is widely used on organic samples, especially wood, charcoal and bone. Classical techniques use samples of several grams, but only a few milligrams is needed for measurements by Accelerator Mass Spectrometry (AMS). Palaeomagnetic techniques are readily applicable to the study of ancient kilns. Core samples are drilled from the walls and floors, and oriented before being detached and measured on a sensitive spinner magnetometer in a laboratory. Resolution of a quarter of a century at 95% confidence can be achieved in favourable circumstances but only at certain periods of time. Radiocarbon dating shows that the earliest stoneware ceramics are from the 11th - 12th centuries AD and palaeomagnetism indicates that many in-ground kilns are of this age. Kilns of this type, which were hollowed out in sediments near river banks or old terraces, are found near Sisatchanalai in north-central Thailand and near Luang Prabang in northern Laos; they are similar in age to the Khmer-type kilns found at Suphanburi in central Thailand. A different type of kiln, constructed of bricks and located above-ground, appears towards the end of the 13th century AD. One of the earliest surface kilns at Sisatchanalai has a well determined date of 1290 ± 15 AD (calibrated radiocarbon age, 95% confidence).There is an overlap of the two technologies; stratigraphy and palaeomagnetic results show that in-ground and above-ground brick kilns continue almost side-by-side throughout the 14th century AD. One of the latest in-ground kilns at Sisatchanalai has a date of 1410 ± 25 AD (calibrated radiocarbon age, 95% confidence). There are many brick kilns belonging to the l5th century AD at Sisatchanalai, and they appear then at other sites in north-central Thailand (e.g., Sukhothai and Phitsanulok) and in Burma (e.g., Lagumbyee). In-ground kilns continue to be used in northern Laos even in the 15th century AD. The latest brick kilns at Sisatchanalai are 16th and possibly 17th

Microwave-assisted versus conventional decomposition procedures applied to a ceramic potsherd standard reference material by inductively coupled plasma atomic emission spectrometry

Energy Technology Data Exchange (ETDEWEB)

Papadopoulou, D.N.; Zachariadis, G.A.; Anthemidis, A.N.; Tsirliganis, N.C.; Stratis, J.A

2004-03-03

Inductively coupled plasma atomic emission spectrometry (ICP-AES) is a powerful, sensitive analytical technique with numerous applications in chemical characterization including that of ancient pottery, mainly due to its multi-element character, and the relatively short time required for the analysis. A critical step in characterization studies of ancient pottery is the selection of a suitable decomposition procedure for the ceramic matrix. The current work presents the results of a comparative study of six decomposition procedures applied on a standard ceramic potsherd reference material, SARM 69. The investigated decomposition procedures included three microwave-assisted decomposition procedures, one wet decomposition (WD) procedure by conventional heating, one combined microwave-assisted and conventional heating WD procedure, and one fusion procedure. Chemical analysis was carried out by ICP-AES. Five major (Si, Al, Fe, Ca, Mg), three minor (Mn, Ba, Ti) and two trace (Cu, Co) elements were determined and compared with their certified values. Quantitation was performed at two different spectral lines for each element and multi-element matrix-matched calibration standards were used. The recovery values for the six decomposition procedures ranged between 75 and 110% with a few notable exceptions. Data were processed statistically in order to evaluate the investigated decomposition procedures in terms of recovery, accuracy and precision, and eventually select the most appropriate one for ancient pottery analysis.

Bank Stability and Competition: Evidence from Albanian Banking Market

Directory of Open Access Journals (Sweden)

Gerti SHIJAKU

2017-05-01

Full Text Available This paper analyses the inter-temporal competition – stability nexus after the global financial crises. For this reason, the empirical estimation approach follows a five – step procedure. First, we utilise quarterly macroeconomic and balance sheet and income statement data for 16 banks operating in the Albanian banking sector over the period 2008 – 2015. Second, we calculate a new composite index as a measure of bank stability conditions, which includes a wide set of information rather than focusing only on one aspect of risk. Then, we construct a proxy for bank competition such as the Boone indicator. Empirical estimations are based on the General Method of Moments approach. A set of robustness checks include also the use of other alternative proxy of competition such as the Lerner index and the efficientadjusted Lerner index, profit elasticity and the Herfindahl index. Empirical results strongly support the “competition – stability” view after the global financial crises - that higher degree of competition boosts further bank stability conditions. Results further indicate that greater concentration has also a negative impact on bank stability. Results imply also that bank stability is positively linked with macroeconomic conditions and capital ratio and inverse with operational efficiency. Finally, we do not find a non-linear relationship between competition and stability.

X AFS analysis of ancient chinese porcelain of honglvcai

International Nuclear Information System (INIS)

Wang Lihua; Zhu Jian; Wang Changsui; Duan Huiping; Yan Yan; Xie Yaning

2010-01-01

Structure analysis of Honglvcai, an overglaze ploychrome porcelain produced in China from the Song Dynasty to Ming Dynasty, has been a blank in studies on ancient Chinese ceramics. This work was focused on the oxidation state and local environment of colorants in red, yellow and green decorations on Honglvcai by X-ray absorption fine structure (XAFS). The analysis of Fe K-edge XANES and EXAFS spectra of the red-colored samples indicated that Fe 3+ was mainly located at a distorted octahedral site in a hematite phase, while that if the yellow-colored samples showed that iron was present as both trivalent and divalent cations coordinated with oxygen atoms in an amorphous phase. And Cu K-edge XAFS analysis of the green-colored samples revealed that Cu 2+ was the main constituent coordinated with oxygen atoms in an amorphous phase. (authors)

Apps for Ancient Civilizations

Science.gov (United States)

Thompson, Stephanie

2011-01-01

This project incorporates technology and a historical emphasis on science drawn from ancient civilizations to promote a greater understanding of conceptual science. In the Apps for Ancient Civilizations project, students investigate an ancient culture to discover how people might have used science and math smartphone apps to make their lives…

Traditional marriage and family relations of the Albanian population from Kosovo and Metohia in the light of Leka Dukajini Code

Directory of Open Access Journals (Sweden)

Predojević Jelena R.

2002-01-01

Full Text Available The Leka Dukajini Code (LDC influenced the way of life of Albanian population to a great extent. It represents a set of rules and norms by which they regulated their relations, and it is believed that they still do so presently as well to some extent. Taking into consideration that LDC includes almost all social, economic and moral spheres of life, this paper analyzes the fields which contribute to the familiarization with the conditions in which the Kosovo and Metohia population developed, such as the organization of the patriarchal family, marriage relations, the position of women, inheritance, and similar. The patriarchy with Albanians is still present today, especially in the villages, and here and there in towns, despite the escalated process of urbanization and industrialization. Manifestations of this patriarchal way of life are reflected through the maintenance of the institutions of family clans, whose characteristics are a large number of families, mutual property and production means, mutual production and consumption as well as communal living. A large number of authors believes that in the ethno-psyche of every Albanian there are still roots of will and sympathy towards clans. A clan is governed by its head, and his authority, although established on the interests of the group, presents limited individual freedom for the members of the family because it is expected from them to respect the will of the head of the family. Family clans in the eyes of others represents a secure way of life. Common law arose and developed under cruel life conditions, codified the way of life and in that way neglected individuality yet imposed the group, large families, solidarity and submissiveness to authority. The whole LDC is imbued with religious spirit, which is most obviously expressed with the institution of marriage. It also puts the woman in the worst position, who is not respected as a women, who has no right in decision making, and the more

Domestic Ritual and Identity in the Teotihuacan State: Exploring Regional Processes of Social Integration Through Ceramic Figurines

OpenAIRE

Hagerman, Kiri Louise

2018-01-01

Teotihuacan was a sprawling urban center that came to rule an eponymous expansive polity in the central Mexican highlands from approximately 200 to 600 CE. The conditions that facilitated its initial expansion, however, are not fully understood. This dissertation examines ceramic figurines from Teotihuacan and the three rural sites of Axotlan, Cerro Portezuelo, and Huixtoco in the Basin of Mexico to investigate ancient social relationships, cultural changes, and political transformations duri...

Penetration of the consolidant Paraloid® B-72 in Macuxi indigenous ceramic vessels investigated by neutron tomography

Science.gov (United States)

Stanojev Pereira, Marco A.; Pugliesi, Reynaldo

2018-05-01

The neutron tomography technique was applied in studying the penetration of the consolidant Paraloid® B-72 in contemporary indigenous ceramic vessels. The study was carried out for two distinct and controlled air humidity conditions, 40% and 90%, in which the vessels were exposed, before the consolidant application. The obtained images have proved that the penetration of Paraloid® B-72 in the ceramic does not depend on the humidity condition in which it was applied, moreover allowed a macro-visualization of the consolidant penetration in the ceramic vessel. As the vessels used in the present work were manufactured by an indigenous artisan, Macuxi, according to the same procedures and raw materials used by the ancient artisans, the results obtained can be used as a guide to assist experts, both in the study of archeological objects of Macuxi origin, as well as other objects that had been made by other tribes that lived in the same Amazon region, in Brazil.

A study on provenance relation between Jiaotanxia ancient Guan porcelain and Qingliangsi ancient Ru porcelain by NAA

International Nuclear Information System (INIS)

Li Rongwu; Feng Songlin; Huang Zhongxiang; Jia Xiuqin

2004-01-01

11 samples of ancient Chinese Ru porcelain from Qingliangsi kiln, 23 samples of ancient Chinese Guan porcelain from Jiaotanxia kiln and 4 samples of modern archaized Guan porcelain were obtained to determine the contents of elements in each of them by neutron activation analysis (NAA). The NAA data were further analyzed using fuzzy cluster analysis to obtain the fuzzy cluster trend diagrams for the bodies' samples and the glazes samples respectively. The analysis shows that the raw material origins of the Jiaotanxia ancient Chinese Guan porcelain bodies samples are very concentrated; those of the Qingliangsi ancient Chinese Ru porcelain bodies samples are a little dispersed; those of ancient Chinese Guan porcelain glazes samples are relatively concentrated; those of ancient Chinese Ru porcelain glazes samples are dispersed; and the origins of the raw material of ancient Chinese Guan porcelain glazes samples are obviously different from those of ancient Chinese Ru porcelain glazes samples. The bodies samples and glazes samples of Jiaotanxia ancient Chinese Guan porcelain and those of Qingliangsi ancient Chinese Ru porcelain have some difference but can be compared with each other. (authors)

Fracture strength of three all-ceramic systems: Top-Ceram compared with IPS-Empress and In-Ceram.

Science.gov (United States)

Quran, Firas Al; Haj-Ali, Reem

2012-03-01

The purpose of this study was to investigate the fracture loads and mode of failure of all-ceramic crowns fabricated using Top-Ceram and compare it with all-ceramic crowns fabricated from well-established systems: IPS-Empress II, In-Ceram. Thirty all-ceramic crowns were fabricated; 10 IPS-Empress II, 10 In-Ceram alumina and 10 Top-Ceram. Instron testing machine was used to measure the loads required to introduce fracture of each crown. Mean fracture load for In-Ceram alumina [941.8 (± 221.66) N] was significantly (p > 0.05) higher than those of Top-Ceram and IPS-Empress II. There was no statistically significant difference between Top-Ceram and IPS-Empress II mean fracture loads; 696.20 (+222.20) and 534 (+110.84) N respectively. Core fracture pattern was highest seen in Top- Ceram specimens.

A quick method for authentication of ceramic art objects

International Nuclear Information System (INIS)

Becker, K.; Goedicke, C.

1978-01-01

Thermoluminescence (TL) readout equipment is now in wide use for dosimetric purposes, and the principle of TL dating of ancient pottery generally known. On the other hand, the well-known difficulties in establishing ages by this method with reasonable accuracy discouraged investigators to apply commercial or self-developed TL equipment to the much more frequent and simpler problem of distinguishing between old (=original) and new (=faked) ceramic art objects. The paper describes how, with little additional equipment and modifications of TL readers, authentication tests can be carried out based on the measurement of the TL from large (approximately 0.1-0.25 mm) quartz grains which have been isolated from the pottery. (Auth.)

[Ceramic-on-ceramic bearings in total hip arthroplasty (THA)].

Science.gov (United States)

Sentürk, U; Perka, C

2015-04-01

The main reason for total hip arthroplasty (THA) revision is the wear-related aseptic loosening. Younger and active patients after total joint replacement create high demands, in particular, on the bearings. The progress, especially for alumina ceramic-on-ceramic bearings and mixed ceramics have solved many problems of the past and lead to good in vitro results. Modern ceramics (alumina or mixed ceramics containing alumina) are extremely hard, scratch-resistant, biocompatible, offer a low coefficient of friction, superior lubrication and have the lowest wear rates in comparison to all other bearings in THA. The disadvantage of ceramic is the risk of material failure, i.e., of ceramic fracture. The new generation of mixed ceramics (delta ceramic), has reduced the risk of head fractures to 0.03-0.05 %, but the risk for liner fractures remains unchanged at about 0.02 %. Assuming a non-impinging component implantation, ceramic-on-ceramic bearings have substantial advantages over all other bearings in THA. Due to the superior hardness, ceramic bearings produce less third body wear and are virtually impervious to damage from instruments during the implantation process. A specific complication for ceramic-on-ceramic bearings is "squeaking". The high rate of reported squeaking (0.45 to 10.7 %) highlights the importance of precise implant positioning and the stem and patient selection. With precise implant positioning this problem is rare with many implant designs and without clinical relevance. The improved tribology and the presumable resulting implant longevity make ceramic-on-ceramic the bearing of choice for young and active patients. Georg Thieme Verlag KG Stuttgart · New York.

From Vitruvius' ceramic powder additives to modern restoration

Directory of Open Access Journals (Sweden)

Mário Mendonça de Oliveira

2008-01-01

Full Text Available The text aims at giving a general view of the use of lime mortars additivated with ceramic powder taking advantage of its pozzolanic reactions. It emphasizes the main explicit references of this technique in the ancient writers, starting from Vitruvius and going through important theoreticians of the Renaissance, until it reaches the military engineers of the XVII e XVIII centuries, particularly the Portuguese engineers who had a strong influence in the overseas constructions techniques. Some mistakes in the interpretation of these texts regarding the properties attributed to the addition of ceramic powder in lime mortars are also mentioned. The continuation of the work refers to the description and commentaries of the tests and laboratory observations carried out on the additivated mortars in question. Among these are highlighted the hardening time, the mechanical resistance (axial compression and traction by diametral compression, water absorption by capillary uptake, total water porosity, accelerated aging in saturated solution of Na2SO4, loss on ignition x-rays fluorescence, permeability to water vapor and other procedures that contribute to the evaluation of the behavior of lime mortars additivated with the "cocciopesto" and of the pozzolanic reactions occurring in the material. As the theory would have no sense if it is not necessarily put in practice, the work ends with the description of the application of the mortar additivated with ceramic powder in a concrete case of restoration, with the description of the obtained results.

Parental perceptions of health-related quality of life of Albanian children with epilepsy

Directory of Open Access Journals (Sweden)

Efrosini Kalyva

2015-09-01

Full Text Available Epilepsy adversely affects the health-related quality of life (HRQoL of children living with it. Even though almost 80% of children with epilepsy live in developing countries very little research has been conducted with the specific population. The present study took place in Albania and aimed to investigate parental perceptions of the HRQoL of their children with epilepsy. Considering the well-defined gender roles in the Albanian traditional family it was expected that mothers and fathers reports of their children’s HRQoL would differ. Results showed no differences in maternal and paternal reports; instead there was a moderate correspondence between the reports across all dimensions. Parents also reported the highest scores of HRQoL in the interpersonal dimension and the lowest scores in the intrapersonal dimension. The findings have implications in the context of future research and also medical care for children with epilepsy in Albania.

The Impact of Tourism Sector Development in the Albanian Economy

Directory of Open Access Journals (Sweden)

Alba KRUJA

2012-06-01

Full Text Available Today tourism is viewed as one of the largest and dynamically developing sectors of external economic activities in the world. The development of tourism sector is associated with considerable volumes of foreign currency inflows, new employment opportunities, infrastructure development, and new management experiences. All of these together positively contribute to the social and economic development of the countries. Beside these there are also other effects of tourism which will be considered in this paper. The aim of the research is to examine the impact of tourism sector development on the country economy. The methods of research are: analysis and synthesis of the scientific literature discussing the positive and negative impacts of tourism sector on the social and economic development of the countries; the systematic statistical data analysis of the direct contribution of the sector on the GDP and employment of Albania as a country in its infancy of development, compared to other European countries in maturity. The statistical data used in this research is provided by INSTAT (Albanian Institute of Statistics, AKT (National Tourism Agency and TSA (Tourism Satellite Account, a methodology quantified by the UN Statistics Division for the statistical data provided for the direct contribution of Travel & Tourism.

Preliminary characterization of ceramics from the Lago Grande archaeological site in the central Amazon by INAA

International Nuclear Information System (INIS)

Hazenfratz, Roberto; Munita, Casimiro S.; Neves, Eduardo G.; Oliveira, Paulo M.S.; Toyota, Rosimeiri G.

2009-01-01

The macroscopic characteristics of archaeological ceramics, such as the surface decoration and shape, are used as cultural and chronological indicators of ancient people. The combination of stylistic-typological studies with archaeometric analysis, as provenance studies, has been considered of great importance in Archaeology. The purpose of this paper is to contribute to the understanding of the pre-colonial Amazonian occupations. Inside this context, fifty ceramic fragments from the Lago Grande archaeological site were analyzed by INAA in order to characterize its elemental composition. The results were treated with multivariate statistics: Cluster, Principal Components and Discriminant Analysis. The results obtained by these three methods were compared in an effort to achieve some correlation with the archaeological context. It was stated the existence of two different groups of artifacts. They probably regard to the main ceramic phases found in the site excavation: Paredao and Manacapuru. Once confirmed by other archaeological analyses, these results could corroborate an exchange net among the former inhabitants of Lago Grande and other sites in the neighborhood. (author)

Determination of trace metals in sea waters of the albanian coast by energy-dispersive x-ray fluorescence

International Nuclear Information System (INIS)

Civici, N.

1994-01-01

Preconcentration of trace transition and heavy metal ions by precipitation with APDC has been combined with energy-dispersive X-ray fluorescence for environmental sea water analysis. The preconcentration procedure implies adding of 500 μg Mo ion and 10 ml of 1 % water solution of APDC to a 500 ml water sample at pH 4, filtering off on a Millipore filter and analyzing after drying. Realistic detection limits are at 1 μg * l -1 level and precision varies between 10 - 25% at about 5 μg * l -1 level, depending on the element. Eleven sea water samples, covering Albanian Adriatic and Ionian coast, are analyzed for trace metal ions. (author) 8 refs.; 2 figs.; 5 tabs

Surface modification of ceramics. Ceramics no hyomen kaishitsu

Energy Technology Data Exchange (ETDEWEB)

Hioki, T. (Toyota Central Research and Development Labs., Inc., Nagoya (Japan))

1993-07-05

Surface modification of ceramics and some study results using in implantation in surface modification are introduced. The mechanical properties (strength, fracture toughness, flaw resistance) of ceramics was improved and crack was repaired using surface modification by ion implantation. It is predicted that friction and wear properties are considerably affected because the hardness of ceramics is changed by ion implantation. Cementing and metalization are effective as methods for interface modification and the improvement of the adhesion power of the interface between metal and ceramic is their example. It was revealed that the improvement of mechanical properties of ceramics was achieved if appropriate surface modification was carried out. The market of ceramics mechanical parts is still small, therefore, the present situation is that the field of activities for surface modification of ceramics is also narrow. However, it is thought that in future, ceramics use may be promoted surely in the field like medicine and mechatronics. 8 refs., 4 figs.

Ancient Greek with Thrasymachus: A Web Site for Learning Ancient Greek.

Science.gov (United States)

Barker, Alison

2001-01-01

Discusses a project that was begun as an attempt by two teachers of Ancient Greek to provide supplementary materials to accompany "Thrasymachus," a first-year textbook for learning ancient Greek. Provides a brief history and description of the project, the format of each chapter, a chronology for completion of materials for each chapter in the…

Nopcsa, Baron Franz. 2014. Traveler, Scholar, Politician, Adventurer – A Transylvanian Baron at the Birth of Albanian Independence (ed. and trans. from German Robert Elsie. Budapest: Central European University Press. 227 pp.

Directory of Open Access Journals (Sweden)

David Mandler

2015-01-01

Full Text Available Nopcsa, Baron Franz. 2014. Traveler, Scholar, Politician, Adventurer – A Transylvanian Baron at the Birth of Albanian Independence (ed. and trans. from German Robert Elsie. Budapest: Central European University Press. 227 pp.  Reviewed by David Mandler, Independent Scholar

Ancient genomics

DEFF Research Database (Denmark)

Der Sarkissian, Clio; Allentoft, Morten Erik; Avila Arcos, Maria del Carmen

2015-01-01

throughput of next generation sequencing platforms and the ability to target short and degraded DNA molecules. Many ancient specimens previously unsuitable for DNA analyses because of extensive degradation can now successfully be used as source materials. Additionally, the analytical power obtained...... by increasing the number of sequence reads to billions effectively means that contamination issues that have haunted aDNA research for decades, particularly in human studies, can now be efficiently and confidently quantified. At present, whole genomes have been sequenced from ancient anatomically modern humans...

Tamil merchant in ancient Mesopotamia.

Directory of Open Access Journals (Sweden)

Malliya Gounder Palanichamy

Full Text Available Recent analyses of ancient Mesopotamian mitochondrial genomes have suggested a genetic link between the Indian subcontinent and Mesopotamian civilization. There is no consensus on the origin of the ancient Mesopotamians. They may be descendants of migrants, who founded regional Mesopotamian groups like that of Terqa or they may be merchants who were involved in trans Mesopotamia trade. To identify the Indian source population showing linkage to the ancient Mesopotamians, we screened a total of 15,751 mitochondrial DNAs (11,432 from the literature and 4,319 from this study representing all major populations of India. Our results although suggest that south India (Tamil Nadu and northeast India served as the source of the ancient Mesopotamian mtDNA gene pool, mtDNA of these ancient Mesopotamians probably contributed by Tamil merchants who were involved in the Indo-Roman trade.

Cyclic mechanical fatigue in ceramic-ceramic composites: an update

International Nuclear Information System (INIS)

Lewis, D. III

1983-01-01

Attention is given to cyclic mechanical fatigue effects in a number of ceramics and ceramic composites, including several monolithic ceramics in which significant residual stresses should be present as a result of thermal expansion mismatches and anisotropy. Fatigue is also noted in several BN-containing ceramic matrix-particulate composites and in SiC fiber-ceramic matrix composites. These results suggest that fatigue testing is imperative for ceramics and ceramic composites that are to be used in applications subject to cyclic loading. Fatigue process models are proposed which provide a rationale for fatigue effect observations, but do not as yet provide quantitative results. Fiber composite fatigue damage models indicate that design stresses in these materials may have to be maintained below the level at which fiber pullout occurs

Balancing Acts Between Ancient and Modern Cities: The Ancient Greek Cities Project of C. A. Doxiadis

Directory of Open Access Journals (Sweden)

Mantha Zarmakoupi

2015-12-01

Full Text Available This paper examines the inception and development of the Ancient Greek Cities (AGC research project (1963–77 of Constantinos A. Doxiadis and addresses the novelty of its methodological approach to the study of classical urbanism. With the AGC project, Doxiadis launched a comprehensive study of the ancient Greek built environment to provide an overview of the factors involved in its shaping. The project produced 24 published volumes — the first two laying out the historical and methodological parameters of the ensuing 22 monographs with case studies — as well as 12 unpublished manuscripts, and through international conferences initiated a wider dialogue on ancient cities beyond the classical Greek world. It was the first interdisciplinary study that attempted to tackle the environmental factors, together with the social and economic ones, underpinning the creation, development and operation of ancient Greek cities. Doxiadis’s innovative approach to the analysis of the ancient city was indebted to his practice as an architect and town planner and was informed by his theory of Ekistics. His purpose was to identify the urban planning principles of ancient Greek settlements in order to employ them in his projects. This paper examines the concept and methodology of the AGC project as well as the ways in which Doxiadis used the study of ancient cities in relation to his contemporary urban/architectural agendas, and explains this important moment in the historiography of ancient Greek urbanism.

Characterization of ceramic archaeological by high resolution X ray microtomography

International Nuclear Information System (INIS)

Machado, Alessandra C.; Freitas, Renato; Calza, Cristiane F.; Lopes, Ricardo T.; Lima, Inaya; Carvalho, Daniele D.; Gaspar, Maria D.

2013-01-01

Characterization of ceramic fragments is a very important area of research in art and archeometry area because it enables a greater understanding of how ancient civilizations behave and what were their traditions and customs. Petrography and chemical analyses are commonly used, but these techniques are destructive, which is not interesting for this type of sample. Through the exchange of multidisciplinary scientific knowledge and new partnerships, high resolution X-ray microtomography has been introduced in archaeological area as a great possibility of 3D inspection in a non-destructive way. The goal of this work is to investigate the internal microstructures of four samples of archeological ceramic, from the Archaeological Site of Macacu - RJ. The X-ray microtomography were performed in a high resolution setup, and can be used to infer the nature of organic temper even with all plant remains completely burnt out during the firing process and also to ensure the homogeneity of samples envisaged for geochemical analyses, especially with respect to the distribution of chemically diverse fabric compounds. In this way this study intends to contribute to our understanding of the archaeological and historical formations of this region. (author)

Characterization of ceramic archaeological by high resolution X ray microtomography

Energy Technology Data Exchange (ETDEWEB)

Machado, Alessandra C.; Freitas, Renato; Calza, Cristiane F.; Lopes, Ricardo T.; Lima, Inaya, E-mail: alecastro@lin.ufrj.br [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Lab. de Instrumentacao Nuclear; Carvalho, Daniele D.; Gaspar, Maria D. [Museu Nacional (MN/UFRJ), RJ (Brazil). Centro de Tecnologia

2013-07-01

Characterization of ceramic fragments is a very important area of research in art and archeometry area because it enables a greater understanding of how ancient civilizations behave and what were their traditions and customs. Petrography and chemical analyses are commonly used, but these techniques are destructive, which is not interesting for this type of sample. Through the exchange of multidisciplinary scientific knowledge and new partnerships, high resolution X-ray microtomography has been introduced in archaeological area as a great possibility of 3D inspection in a non-destructive way. The goal of this work is to investigate the internal microstructures of four samples of archeological ceramic, from the Archaeological Site of Macacu - RJ. The X-ray microtomography were performed in a high resolution setup, and can be used to infer the nature of organic temper even with all plant remains completely burnt out during the firing process and also to ensure the homogeneity of samples envisaged for geochemical analyses, especially with respect to the distribution of chemically diverse fabric compounds. In this way this study intends to contribute to our understanding of the archaeological and historical formations of this region. (author)

MEASURING CONSUMER-BASED BRAND EQUITY - EVIDENCE FROM ALBANIAN BANKING SECTOR

Directory of Open Access Journals (Sweden)

Shpëtim ÇERRI

2012-01-01

Full Text Available Today brands and branding have gained a lot of attention among academics and practitioners as well, since they are considered crucial for the success of a company. The branding literature, however, has been more focused on goods branding, relatively neglecting the services branding. Branding equity in services, as an important concept of services branding, also has not received the deserved attention from academics and services companies’ managers.The study aims to measure the brand equity in services sector, since brand equity is very important for monitoring of the health of services brands. It has been focused in the banking sector, a well-developed and consolidated sector which employs hundreds of individuals and has a very important role in Albanian economy. Nine banks, which make up more than 98 per cent of the domestic market in banking services (according to the official data of the Bank of Albania, were chosen to be included in the study. 250 bank customers were interviewed, using direct interviews. After an extensive literature review about the branding and services branding, seven measures were chosen and used to measure the services brand equity. The findings of the study gave interesting insights about services branding equity and services branding in general. It has important and useful implications for banks’ managers as well as for academics.

Method of forming a ceramic matrix composite and a ceramic matrix component

Science.gov (United States)

de Diego, Peter; Zhang, James

2017-05-30

A method of forming a ceramic matrix composite component includes providing a formed ceramic member having a cavity, filling at least a portion of the cavity with a ceramic foam. The ceramic foam is deposited on a barrier layer covering at least one internal passage of the cavity. The method includes processing the formed ceramic member and ceramic foam to obtain a ceramic matrix composite component. Also provided is a method of forming a ceramic matrix composite blade and a ceramic matrix composite component.

Dental caries experience among Albanian pre-school children: a national survey.

Science.gov (United States)

Hysi, D; Caglar, E; Droboniku, E; Toti, C; Kuscu, O O

2017-03-01

To determine the dental caries experience and treatment needs among 5-year-olds in Albania. This cross sectional study was conducted in 2015 by using a cluster sampling technique. The dmft was used to assess dental caries experience and caries prevalence as percentages of children with dmf⟩0. Caries treatment needs were assessed with dt/dmft x 100, missing teeth with mt/dmft x 100 and ft /dmft x 100 as the Care Index. 2,039 five-year-olds, from 17 districts of Albania were selected . Children's residency was divided into 3 main regions (South, West, Central and North). WHO 2013 diagnostic criteria were used and dental caries was recorded at cavity level d3. The mean age was 5.4 (SD 0.5) years. The caries prevalence (dmf⟩0) was 84.1%. The prevalence of children without cavitated lesions (d=0) was 20.1%. The mean dmft index was 4.41 (SD 3.83). The caries treatment needs were 84% (SD 26%). The Albanian 5-year-olds assessed in this survey had a high dental caries experience and untreated cavities in the primary dentition. The national health authorities should introduce preventive programs and improved dental care access for this age group. Copyright© 2017 Dennis Barber Ltd

Archaeological Studies of the Ancient Turkestan Site: results of 2011-2012 excavations

Directory of Open Access Journals (Sweden)

Smagulov Yerbulat A.

2013-03-01

Full Text Available The results of the 2011-12 excavations on the Eski-Turkestan site conducted by the Turkestani archaeological expedition (Institute of archaeology named after A. Margulan are presented. The site contains the remains of the ancient town of Yasy (modern town of Turkestan, South Kazakhstan oblast. The aim of the excavations was to study the earliest layers of the settlement, the primary stages of the city formation, and to identify construction elements of the ancient citadel in particular. It has been established that the most ancient nucleus of the city was located under Kultobe hill on the eastern edge of the settlement. The oldest architectural object of the citadel is a cruciform construction with powerful rammed clay defensive walls having narrow loopholes, preserved to a height of over 3 m. The three rooms were connected by arched doorways. In the second construction horizon, a building with long narrow rooms around a small open courtyard had been added to this "castle". During this period, around the perimeter of the citadel powerful rammed clay and mud-brick defensive walls had been erected, with the space between them and the extended castle being just partially built up. These two periods can be dated to the 1st–3rd centuries AD. This stage comes to an end with defeat and a fire. In the fire layer, numerous ceramic vessels in disassembling have been found. Individual unique finds have been made, and alabaster idols are of special interest. The restoration of the fortification wall and a new stage of the citadel development refer to the 9th-11th centuries. At the base of the new wall, pots with sacrificial food have been discovered, one of them bearing a runic inscription.

A guide to ancient protein studies

DEFF Research Database (Denmark)

Hendy, Jessica; Welker, Frido; Demarchi, Beatrice

2018-01-01

Palaeoproteomics is an emerging neologism used to describe the application of mass spectrometry-based approaches to the study of ancient proteomes. As with palaeogenomics (the study of ancient DNA), it intersects evolutionary biology, archaeology and anthropology, with applications ranging from....... Additionally, in contrast to the ancient DNA community, no consolidated guidelines have been proposed by which researchers, reviewers and editors can evaluate palaeoproteomics data, in part due to the novelty of the field. Here we present a series of precautions and standards for ancient protein research...

A new classification system for all-ceramic and ceramic-like restorative materials.

Science.gov (United States)

Gracis, Stefano; Thompson, Van P; Ferencz, Jonathan L; Silva, Nelson R F A; Bonfante, Estevam A

2015-01-01

Classification systems for all-ceramic materials are useful for communication and educational purposes and warrant continuous revisions and updates to incorporate new materials. This article proposes a classification system for ceramic and ceramic-like restorative materials in an attempt to systematize and include a new class of materials. This new classification system categorizes ceramic restorative materials into three families: (1) glass-matrix ceramics, (2) polycrystalline ceramics, and (3) resin-matrix ceramics. Subfamilies are described in each group along with their composition, allowing for newly developed materials to be placed into the already existing main families. The criteria used to differentiate ceramic materials are based on the phase or phases present in their chemical composition. Thus, an all-ceramic material is classified according to whether a glass-matrix phase is present (glass-matrix ceramics) or absent (polycrystalline ceramics) or whether the material contains an organic matrix highly filled with ceramic particles (resin-matrix ceramics). Also presented are the manufacturers' clinical indications for the different materials and an overview of the different fabrication methods and whether they are used as framework materials or monolithic solutions. Current developments in ceramic materials not yet available to the dental market are discussed.

Aiding the Interpretation of Ancient Documents

DEFF Research Database (Denmark)

Roued-Cunliffe, Henriette

How can Decision Support System (DSS) software aid the interpretation process involved in the reading of ancient documents? This paper discusses the development of a DSS prototype for the reading of ancient texts. In this context the term ‘ancient documents’ is used to describe mainly Greek...... tool it is important first to comprehend the interpretation process involved in reading ancient documents. This is not a linear process but rather a recursive process where the scholar moves between different levels of reading, such as ‘understanding the meaning of a character’ or ‘understanding...

Medicine in Ancient Assur

DEFF Research Database (Denmark)

Arbøll, Troels Pank

This dissertation is a microhistorical study of a single individual named Kiṣir-Aššur who practiced medicine in the ancient city of Assur (modern northern Iraq) in the 7th century BCE. The study provides the first detailed analysis of one healer’s education and practice in ancient Mesopotamia...

The eye and its diseases in Ancient Egypt

DEFF Research Database (Denmark)

Andersen, S. Ry

1997-01-01

Ophthalmology, History of ophthalmology, eyes in the Ancient Egypt, eye disease in Ancient Egypt, porotic hyperostosis, mummification......Ophthalmology, History of ophthalmology, eyes in the Ancient Egypt, eye disease in Ancient Egypt, porotic hyperostosis, mummification...

Wonderland of ceramics superplasticity; Ceramics chososei no sekai

Energy Technology Data Exchange (ETDEWEB)

Wakai, F. [National Industrial Research Inst. of Nagoya, Nagoya (Japan)

1995-07-01

It has been ten years since it was found that ceramics, which is strong and hard at room temperatures and does not deform at all, may exhibit a superplasticity phenomenon at high temperatures that it endlessly elongates when pulled as if it were chewing gum. This phenomenon is one of peculiar behaviours which nano-crystal ceramics, pulverized to an extent that the crystalline particle size is on the order of nanometers, show. The application of superplasticity made the material engineers`s old dream come true that hard ceramics are arbitrarily deformed and machined like metal. Using as models materials such as silicone nitride, alumina and zirconia, this paper describes the history and deformation mechanism of ceramics superplasticity, material design aiming at superplasticization and application of ceramics superplasticity to the machining technology. Furthermore, it describes the trend and future development of international joint researches on the basic surveys on ceramics superplasticity. 25 refs., 11 figs.

Ancient Chinese Precedents in China

National Research Council Canada - National Science Library

Geddis, Robert

1999-01-01

... classics from ancient china. The assumption is that since China's political and military leaders state openly that their strategy is based on traditional Chinese strategic concepts, a study of ancient classics on strategy...

Ceramic Laser Materials

Directory of Open Access Journals (Sweden)

Guillermo Villalobos

2012-02-01

Full Text Available Ceramic laser materials have come a long way since the first demonstration of lasing in 1964. Improvements in powder synthesis and ceramic sintering as well as novel ideas have led to notable achievements. These include the first Nd:yttrium aluminum garnet (YAG ceramic laser in 1995, breaking the 1 KW mark in 2002 and then the remarkable demonstration of more than 100 KW output power from a YAG ceramic laser system in 2009. Additional developments have included highly doped microchip lasers, ultrashort pulse lasers, novel materials such as sesquioxides, fluoride ceramic lasers, selenide ceramic lasers in the 2 to 3 μm region, composite ceramic lasers for better thermal management, and single crystal lasers derived from polycrystalline ceramics. This paper highlights some of these notable achievements.

Ceramic Laser Materials

Science.gov (United States)

Sanghera, Jasbinder; Kim, Woohong; Villalobos, Guillermo; Shaw, Brandon; Baker, Colin; Frantz, Jesse; Sadowski, Bryan; Aggarwal, Ishwar

2012-01-01

Ceramic laser materials have come a long way since the first demonstration of lasing in 1964. Improvements in powder synthesis and ceramic sintering as well as novel ideas have led to notable achievements. These include the first Nd:yttrium aluminum garnet (YAG) ceramic laser in 1995, breaking the 1 KW mark in 2002 and then the remarkable demonstration of more than 100 KW output power from a YAG ceramic laser system in 2009. Additional developments have included highly doped microchip lasers, ultrashort pulse lasers, novel materials such as sesquioxides, fluoride ceramic lasers, selenide ceramic lasers in the 2 to 3 μm region, composite ceramic lasers for better thermal management, and single crystal lasers derived from polycrystalline ceramics. This paper highlights some of these notable achievements. PMID:28817044

Dwarfs in ancient Egypt.

Science.gov (United States)

Kozma, Chahira

2006-02-15

Ancient Egypt was one of the most advanced and productive civilizations in antiquity, spanning 3000 years before the "Christian" era. Ancient Egyptians built colossal temples and magnificent tombs to honor their gods and religious leaders. Their hieroglyphic language, system of organization, and recording of events give contemporary researchers insights into their daily activities. Based on the record left by their art, the ancient Egyptians documented the presence of dwarfs in almost every facet of life. Due to the hot dry climate and natural and artificial mummification, Egypt is a major source of information on achondroplasia in the old world. The remains of dwarfs are abundant and include complete and partial skeletons. Dwarfs were employed as personal attendants, animal tenders, jewelers, and entertainers. Several high-ranking dwarfs especially from the Old Kingdom (2700-2190 BCE) achieved important status and had lavish burial places close to the pyramids. Their costly tombs in the royal cemeteries and the inscriptions on their statutes indicate their high-ranking position in Egyptian society and their close relation to the king. Some of them were Seneb, Pereniankh, Khnumhotpe, and Djeder. There were at least two dwarf gods, Ptah and Bes. The god Ptah was associated with regeneration and rejuvenation. The god Bes was a protector of sexuality, childbirth, women, and children. He was a favored deity particularly during the Greco-Roman period. His temple was recently excavated in the Baharia oasis in the middle of Egypt. The burial sites and artistic sources provide glimpses of the positions of dwarfs in daily life in ancient Egypt. Dwarfs were accepted in ancient Egypt; their recorded daily activities suggest assimilation into daily life, and their disorder was not shown as a physical handicap. Wisdom writings and moral teachings in ancient Egypt commanded respect for dwarfs and other individuals with disabilities. Copyright (c) 2005 Wiley-Liss, Inc.

I think of my family, therefore I am: perceptions of daily occupations of some Albanians in Switzerland.

Science.gov (United States)

Heigl, Franziska; Kinébanian, Astrid; Josephsson, Staffan

2011-03-01

The purpose of this qualitative study was to increase the understanding of the relationship between culture and occupation by exploring the perceptions of current daily occupations of some immigrants living in Switzerland. Semi-structured interviews with eight healthy Muslim Albanian men doing blue-collar work were analysed in a comparative manner followed by an interpretation. Three themes were identified: "Everything I do I do for my family"; "Where do I belong?"; and "Doing something for myself". These themes reflect the occupational perceptions of the participants. The findings are discussed in relation to the ongoing discourses on individualism and collectivism. To offer occupational therapy appropriately to a multicultural clientele the findings indicate the necessity to be conscious of the differences between one's own and the client's attitudes regarding individualism and collectivism.

A comparative analysis of reticular crack on ceramic plate driven by thermal shock

Science.gov (United States)

Xu, XiangHong; Sheng, ShiLong; Tian, Cheng; Yuan, WenJun

2016-07-01

Reticular crack is generally found on the surface of ceramic material that has been subjected to a thermal-shock condition. In the present study, a quantitative effect of thermal shock and quench temperature has been studied and investigated. Experimental tests were carried out to characterize the reticular crack that has been found in the Ge Kiln, which is a famous art of the ancient Chinese culture. After comparative analysis between thermal-shock cracks and the glaze crack patterns of the Ge Kiln porcelain, it is found that this study is expected to provide a powerful tool for recurrence of the long-lost firing and cooling process of the Ge Kiln porcelain.

Ancient Biomolecules and Evolutionary Inference

DEFF Research Database (Denmark)

Cappellini, Enrico; Prohaska, Ana; Racimo, Fernando

2018-01-01

Over the last decade, studies of ancient biomolecules-particularly ancient DNA, proteins, and lipids-have revolutionized our understanding of evolutionary history. Though initially fraught with many challenges, the field now stands on firm foundations. Researchers now successfully retrieve nucleo...

One century later: the folk botanical knowledge of the last remaining Albanians of the upper Reka Valley, Mount Korab, Western Macedonia.

Science.gov (United States)

Pieroni, Andrea; Rexhepi, Besnik; Nedelcheva, Anely; Hajdari, Avni; Mustafa, Behxhet; Kolosova, Valeria; Cianfaglione, Kevin; Quave, Cassandra L

2013-04-11

Ethnobotanical surveys of the Western Balkans are important for the cross-cultural study of local plant knowledge and also for obtaining baseline data, which is crucial for fostering future rural development and eco-tourism initiatives in the region. The current ethnobotanical field study was conducted among the last remaining Albanians inhabiting the upper Reka Valley at the base of Mount Korab in the Mavrovo National Park of the Republic of Macedonia.The aims of the study were threefold: 1) to document local knowledge pertaining to plants; 2) to compare these findings with those of an ethnographic account written one century ago and focused on the same territory; and 3) to compare these findings with those of similar field studies previously conducted in other areas of the Balkans. Field research was conducted with all inhabitants of the last four inhabited villages of the upper Reka Valley (n=17). Semi-structured and open interviews were conducted regarding the perception and use of the local flora and cultivated plants. The uses of ninety-two plant and fungal taxa were recorded; among the most uncommon uses, the contemporary use of young cooked potato (Solanum tuberosum) leaves and Rumex patientia as a filling for savory pies was documented. Comparison of the data with an ethnographic study conducted one century ago in the same area shows a remarkable resilience of original local plant knowledge, with the only exception of rye, which has today disappeared from the local foodscape. Medicinal plant use reports show important similarities with the ethnobotanical data collected in other Albanian areas, which are largely influenced by South-Slavic cultures.

Ceramic piezoelectric materials

International Nuclear Information System (INIS)

Kaszuwara, W.

2004-01-01

Ceramic piezoelectric materials conert reversibility electric energy into mechanical energy. In the presence of electric field piezoelectric materials exhibit deformations up to 0.15% (for single crystals up to 1.7%). The deformation energy is in the range of 10 2 - 10 3 J/m 3 and working frequency can reach 10 5 Hz. Ceramic piezoelectric materials find applications in many modern disciplines such as: automatics, micromanipulation, measuring techniques, medical diagnostics and many others. Among the variety of ceramic piezoelectric materials the most important appear to be ferroelectric materials such as lead zirconate titanate so called PZT ceramics. Ceramic piezoelectric materials can be processed by methods widely applied for standard ceramics, i.e. starting from simple precursors e.g. oxides. Application of sol-gel method has also been reported. Substantial drawback for many applications of piezoelectric ceramics is their brittleness, thus much effort is currently being put in the development of piezoelectric composite materials. Other important research directions in the field of ceramic piezoelectric materials composite development of lead free materials, which can exhibit properties similar to the PZT ceramics. Among other directions one has to state processing of single crystals and materials having texture or gradient structure. (author)

Ancient and Current Chaos Theories

Directory of Open Access Journals (Sweden)

Güngör Gündüz

2006-07-01

Full Text Available Chaos theories developed in the last three decades have made very important contributions to our understanding of dynamical systems and natural phenomena. The meaning of chaos in the current theories and in the past is somewhat different from each other. In this work, the properties of dynamical systems and the evolution of chaotic systems were discussed in terms of the views of ancient philosophers. The meaning of chaos in Anaximenes’ philosophy and its role in the Ancient natural philosophy has been discussed in relation to other natural philosophers such as of Anaximander, Parmenides, Heraclitus, Empedocles, Leucippus (i.e. atomists and Aristotle. In addition, the fundamental concepts of statistical mechanics and the current chaos theories were discussed in relation to the views in Ancient natural philosophy. The roots of the scientific concepts such as randomness, autocatalysis, nonlinear growth, information, pattern, etc. in the Ancient natural philosophy were investigated.

Testing method for ceramic armour and bare ceramic tiles

NARCIS (Netherlands)

Carton, E.P.; Roebroeks, G.H.J.J.

2016-01-01

TNO developed an alternative, more configuration independent ceramic test method than the Depth-of-Penetration test method. In this alternative test ceramic tiles and ceramic based armour are evaluated as target without a semi-infinite backing layer. An energy approach is chosen to evaluate and rank

Testing method for ceramic armor and bare ceramic tiles

NARCIS (Netherlands)

Carton, E.P.; Roebroeks, G.H.J.J.

2014-01-01

TNO has developed an alternative, more configuration independent ceramic test method than the standard Depth-of-Penetration test method. In this test ceramic tiles and ceramic based armor are evaluated as target without a semi-infinite backing layer. An energy approach is chosen to evaluate and rank

FIBROUS CERAMIC-CERAMIC COMPOSITE MATERIALS PROCESSING AND PROPERTIES

OpenAIRE

Naslain , R.

1986-01-01

The introduction of continuous fibers in a ceramic matrix can improve its toughness, if the fiber-matrix bonding is weak enough, due to matrix microcracking and fiber pull-out. Ceramic-ceramic composite materials are processed according to liquid or gas phase techniques. The most important are made of glass, carbide, nitride or oxide matrices reinforced with carbon, SiC or Al2O3 fibers.

An Application of EVT, GPD and POT Methods in the Albanian Insurance Market

Directory of Open Access Journals (Sweden)

Enkeleda Shehi

2015-03-01

Full Text Available Despite its relatively fast development, the insurance sector in Albania suffers from laco of experience, and lack of a database with historical records to make risk assessments feasible and to enable risk calculation. Consequently the newly established companies that operate in the insurance market in Albania cope with difficulties to make accurate calculations of reinsurance premium, i.e. the premium paid by a ceding company to an reinsurer in exchange of the liability assumed by the reinsurer. Given the situation, this research paper aims to provide an alternative way to make pure premium estimations. We have taken in consideration a dataset of fire insurance and other perils' claims, which have taken place in the Albanian insurance market during 2007 t 2014 period. Prices have been inflated to take into account the inflation of the period. There are n=401 fire insurance and other peril losses, the largest of them is Euro 1.203.798, the average is 20.156 Euro and the standard deviation is s= 83.037 Euro. The skewness coefficient of 9,94, indicates that the right tail is heavy, with considerable scope for llarge losses.

Radiocarbon dating of ancient Japanese documents

International Nuclear Information System (INIS)

Oda, H.

2001-01-01

History is a reconstruction of past human activity, evidence of which is remained in the form of documents or relics. For the reconstruction of historic period, the radiocarbon dating of ancient documents provides important information. Although radiocarbon age is converted into calendar age with the calibration curve, the calibrated radiocarbon age is still different from the historical age when the document was written. The difference is known as 'old wood effect' for wooden cultural property. The discrepancy becomes more serious problem for recent sample which requires more accurate age determination. Using Tandetron accelerator mass spectrometer at Nagoya University, we have measured radiocarbon ages of Japanese ancient documents, sutras and printed books written dates of which are clarified from the paleographic standpoint. The purpose is to clarify the relation between calibrated radiocarbon age and historical age of ancient Japanese document by AMS radiocarbon dating. This paper reports 23 radiocarbon ages of ancient Japanese documents, sutras and printed books. The calibrated radiocarbon ages are in good agreement with the corresponding historical ages. It was shown by radiocarbon dating of the ancient documents that Japanese paper has little gap by 'old wood effect'; accordingly, ancient Japanese paper is a suitable sample for radiocarbon dating of recent historic period. (author)

Durability of feldspathic veneering ceramic on glass-infiltrated alumina ceramics after long-term thermocycling.

Science.gov (United States)

Mesquita, A M M; Ozcan, M; Souza, R O A; Kojima, A N; Nishioka, R S; Kimpara, E T; Bottino, M A

2010-01-01

This study compared the bond strength durability of a feldspathic veneering ceramic to glass-infiltrated reinforced ceramics in dry and aged conditions. Disc shaped (thickness: 4 mm, diameter: 4 mm) of glass-infiltrated alumina (In-Ceram Alumina) and glass-infiltrated alumina reinforced by zirconia (In-Ceram Zirconia) core ceramic specimens (N=48, N=12 per groups) were constructed according to the manufacturers' recommendations. Veneering ceramic (VITA VM7) was fired onto the core ceramics using a mold. The core-veneering ceramic assemblies were randomly divided into two conditions and tested either immediately after specimen preparation (Dry) or following 30000 thermocycling (5-55 ºC±1; dwell time: 30 seconds). Shear bond strength test was performed in a universal testing machine (cross-head speed: 1 mm/min). Failure modes were analyzed using optical microscope (x20). The bond strength data (MPa) were analyzed using ANOVA (α=0.05). Thermocycling did not decrease the bond strength results for both In-Ceram Alumina (30.6±8.2 MPa; P=0.2053) and In-Ceram zirconia (32.6±9 MPa; P=0.3987) core ceramic-feldspathic veneering ceramic combinations when compared to non-aged conditions (28.1±6.4 MPa, 29.7±7.3 MPa, respectively). There were also no significant differences between adhesion of the veneering ceramic to either In-Ceram Alumina or In-Ceram Zirconia ceramics (P=0.3289). Failure types were predominantly a mixture of adhesive failure between the veneering and the core ceramic together with cohesive fracture of the veneering ceramic. Long-term thermocycling aging conditions did not impair the adhesion of the veneering ceramic to the glass-infiltrated alumina core ceramics tested.

An Investigation of the Essential Factors on Customer Loyalty in Banking Sector: A Case of Albanian Retail Bank

Directory of Open Access Journals (Sweden)

Yüksel KÖKSAL

2014-06-01

Full Text Available The purpose of this research is to reveal essential factors that have influences on customer loyalty directly in Albanian retail banking context. In order to bring out essential factors, we have developed a questionnaire and 410 people participated in the survey. Five different factors have been described to analyze their directly impacts on customer loyalty such as Service, Security, Relationship, Reliability and Staff. The significant relations of each factor with customer loyalty have been analyzed by conducting confirmatory factor analysis. Obtained results indicate that only ‘relationship’ and ‘staff’ factors have a direct impact on customer loyalty. Determination of the essential factors on customer loyalty in banking sector will be helpful to bank managers to define priorities in order to enhance customer satisfaction and loyalty.

Authenticity in ancient DNA studies

DEFF Research Database (Denmark)

Gilbert, M Thomas P; Willerslev, Eske

2006-01-01

Ancient DNA studies represent a powerful tool that can be used to obtain genetic insights into the past. However, despite the publication of large numbers of apparently successful ancient DNA studies, a number of problems exist with the field that are often ignored. Therefore, questions exist as ...

The History and Practice of Ancient Astronomy

CERN Document Server

Evans, James

1998-01-01

The History and Practice of Ancient Astronomy combines new scholarship with hands-on science to bring readers into direct contact with the work of ancient astronomers. While tracing ideas from ancient Babylon to sixteenth-century Europe, the book places its greatest emphasis on the Greek period, when astronomers developed the geometric and philosophical ideas that have determined the subsequent character of Western astronomy. The author approaches this history through the concrete details of ancient astronomical practice. Carefully organized and generously illustrated, the book can teach reade

An investigation into the ancient abortion laws: comparing ancient Persia with ancient Greece and Rome.

Science.gov (United States)

Yarmohammadi, Hassan; Zargaran, Arman; Vatanpour, Azadeh; Abedini, Ehsan; Adhami, Siamak

2013-01-01

Since the dawn of medicine, medical rights and ethics have always been one of mankind's concerns. In any civilisation, attention paid to medical laws and ethics depends on the progress of human values and the advancement of medical science. The history of various civilisations teaches that each had its own views on medical ethics, but most had something in common. Ancient civilisations such as Greece, Rome, or Assyria did not consider the foetus to be alive and therefore to have human rights. In contrast, ancient Persians valued the foetus as a living person equal to others. Accordingly, they brought laws against abortion, even in cases of sexual abuse. Furthermore, abortion was considered to be a murder and punishments were meted out to the mother, father, and the person performing it.

The Ancient Greece's roots of Olimpism

Directory of Open Access Journals (Sweden)

Bubka Sergej Nazarovich

2011-10-01

Full Text Available The paper focused on the phenomena of sport in Ancient Greece along with history, traditions, religion, education, culture and art. Economic and political conditions are analysed which promote or hamper development of Olympic Games in Ancient Greece. Exceptional stability of Ancient Olympic games during more than eleven centuries are noted as well as their influence on the life of Greek polices of those days. Hellenistic period needs of individual consideration.

Urology and the scientific method in ancient Egypt.

Science.gov (United States)

Gordetsky, Jennifer; O'Brien, Jeanne

2009-03-01

To examine the practice of urology in ancient Egypt using various sources, including the Edwin Smith and Ebers Papyri. The sources of knowledge of ancient Egyptian medicine include medical papyri, paleopathology, art, and hieroglyphic carvings. A brief overview of the medical system in ancient Egypt was completed, in addition to an examination of the training and specialization of the physician in the ancient world. Urologic diseases treated in ancient Egypt and some of the first documented urologic surgeries are presented. Finally, we studied the role of the physician-priest and the intertwined use of religion and magic in ancient Egyptian medicine. The same medical conditions urologists treat in the office today were methodically documented thousands of years ago. Medical papyri show evidence that the ancient Egyptians practiced medicine using a scientific method based on the clinical observation of disease. This has been exemplified by the Edwin Smith Surgical Papyrus, a collection of surgical cases that gives a diagnosis, treatment, and prognosis for each ailment, and the discovery of medical specialization in ancient Egypt, giving us perhaps the world's first urologists. Intertwined with the scientific method was also the rich mysticism and religion of ancient Egypt, which were integral components of the healing process. We present an overview of the practice of urology in ancient Egypt, in terms of both pharmacologic and surgical intervention, as well as with a look into the religion of medicine practiced at that time.

Ceramic Technology Project

Energy Technology Data Exchange (ETDEWEB)

1992-03-01

The Ceramic Technology Project was developed by the USDOE Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the USDOE and NASA advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. These programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. A five-year project plan was developed with extensive input from private industry. In July 1990 the original plan was updated through the estimated completion of development in 1993. The objective is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities.

Creep in ceramics

CERN Document Server

Pelleg, Joshua

2017-01-01

This textbook is one of its kind, since there are no other books on Creep in Ceramics. The book consist of two parts: A and B. In part A general knowledge of creep in ceramics is considered, while part B specifies creep in technologically important ceramics. Part B covers creep in oxide ceramics, carnides and nitrides. While covering all relevant information regarding raw materials and characterization of creep in ceramics, the book also summarizes most recent innovations and developments in this field as a result of extensive literature search.

Sensitive Ceramics

DEFF Research Database (Denmark)

2014-01-01

Sensitive Ceramics is showing an interactive digital design tool for designing wall like composition with 3d ceramics. The experiment is working on two levels. One which has to do with designing compositions and patterns in a virtual 3d universe based on a digital dynamic system that responds on ...... with realizing the modules in ceramics by 3d printing directly in porcelain with a RapMan printer that coils up the 3d shape in layers. Finally the ceramic modules are mounted in a laser cut board that reflects the captured composition of the movement of the hands....

Physicochemical characterization of ceramics from Sao Paulo II archaeological site; Caracterizacao fisico-quimica da ceramica do sitio arqueologico Sao Paulo II

Energy Technology Data Exchange (ETDEWEB)

Ribeiro, Rogerio Baria

2013-08-01

Archaeometry is a consolidated field with a wide application of nuclear analytical techniques for the characterization, protection, and restoration of archaeological pieces. This project aimed at studying the elementary chemical composition of 70 ceramic fragments samples from Sao Paulo II archaeological site, located along the Solimoes River channel, next to Coari city, in Brazilian Amazon. The characterization of samples was performed by neutron activation analysis (NAA). By the determination of 24 elements in the ceramic fragments ( Ce, Co, Cr, Cs, Eu, Fe, Hf, K, La, Lu, Na, Nd, Sb, Sm. Rb, Se, Ta, Tb, Th, U, Yb and Zn), it was possible to define groups of samples regarding the similarity/dissimilarity in elementary chemical composition. For such a task, the multivariate statistical methods employed were cluster analysis (C A), principal component analysis (PCA) and discriminant analysis (DA). Afterwards, seven ceramic fragments were selected based on the groups previously established, for the characterization of the site temporal horizon. Those ceramic fragments were analyzed by thermoluminescence (TL) and EPR for dating purposes. The firing temperatures were determined by electron paramagnetic resonance (EPR) technique, in order to infer about some aspects of the ceramic manufacture employed by the ancient peoples that lived in Sao Paulo 11. By the results obtained in this study, it was possible to identify the quantity of clay sources employed by the ceramists and the age of the ceramic pieces. Therefore, the results of this research may contribute to the study on the occupation dynamics in the pre-colonial Brazilian Amazon. (author)

Advanced Ceramics

International Nuclear Information System (INIS)

1989-01-01

The First Florida-Brazil Seminar on Materials and the Second State Meeting about new materials in Rio de Janeiro State show the specific technical contribution in advanced ceramic sector. The others main topics discussed for the development of the country are the advanced ceramic programs the market, the national technic-scientific capacitation, the advanced ceramic patents, etc. (C.G.C.) [pt

Characterization of ceramics used in mass ceramic industry Goianinha/RN

International Nuclear Information System (INIS)

Sales Junior, J.C.C.; Nascimento, R.M. do; Andrade, J.C.S.; Saldanha, K.M.; Dutra, R.P.S.

2011-01-01

The preparation of the the ceramic mass is one of the most important steps in the manufacture of ceramic products, since the characteristics of the raw materials used, and the proportions that they are added, directly influence the final properties of ceramic products and the operational conditions of processing. The objective of this paper is to present the results of the characterization of a ceramic mass used in the manufacture of sealing blocks by a red ceramic industry of the city of Goianinha / RN. We analyzed the chemical and mineralogical composition; thermogravimetric and differential thermal analysis; granulometric analysis; evaluation of plasticity; and determining the technological properties of specimens used in test firing at 700, 900 and 1100 ° C. The results show that the ceramic body studied has characteristics that allow use in the manufacture of sealing blocks when burned at a temperature of 900 ° C. (author)

Randomized, Controlled Clinical Trial of Bilayer Ceramic and Metal-Ceramic Crown Performance

Science.gov (United States)

Esquivel-Upshaw, Josephine; Rose, William; Oliveira, Erica; Yang, Mark; Clark, Arthur E.; Anusavice, Kenneth

2013-01-01

Purpose Analyzing the clinical performance of restorative materials is important, as there is an expectation that these materials and procedures will restore teeth and do no harm. The objective of this research study was to characterize the clinical performance of metal-ceramic crowns, core ceramic crowns, and core ceramic/veneer ceramic crowns based on 11 clinical criteria. Materials and Methods An IRB-approved, randomized, controlled clinical trial was conducted as a single-blind pilot study. The following three types of full crowns were fabricated: (1) metal-ceramic crown (MC) made from a Pd-Au-Ag-Sn-In alloy (Argedent 62) and a glass-ceramic veneer (IPS d.SIGN veneer); (2) non-veneered (glazed) lithium disilicate glass-ceramic crown (LDC) (IPS e.max Press core and e.max Ceram Glaze); and (3) veneered lithia disilicate glass-ceramic crown (LDC/V) with glass-ceramic veneer (IPS Empress 2 core and IPS Eris). Single-unit crowns were randomly assigned. Patients were recalled for each of 3 years and were evaluated by two calibrated clinicians. Thirty-six crowns were placed in 31 patients. A total of 12 crowns of each of the three crown types were studied. Eleven criteria were evaluated: tissue health, marginal integrity, secondary caries, proximal contact, anatomic contour, occlusion, surface texture, cracks/chips (fractures), color match, tooth sensitivity, and wear (of crowns and opposing enamel). Numerical rankings ranged from 1 to 4, with 4 being excellent, and 1 indicating a need for immediate replacement. Statistical analysis of the numerical rankings was performed using a Fisher’s exact test. Results There was no statistically significant difference between performance of the core ceramic crowns and the two veneered crowns at year 1 and year 2 (p > 0.05). All crowns were rated either as excellent or good for each of the clinical criteria; however, between years 2 and 3, gradual roughening of the occlusal surface occurred in some of the ceramic-ceramic crowns

Adjusting dental ceramics: An in vitro evaluation of the ability of various ceramic polishing kits to mimic glazed dental ceramic surface.

Science.gov (United States)

Steiner, René; Beier, Ulrike S; Heiss-Kisielewsky, Irene; Engelmeier, Robert; Dumfahrt, Herbert; Dhima, Matilda

2015-06-01

During the insertion appointment, the practitioner is often faced with the need to adjust ceramic surfaces to fit a restoration to the adjacent or opposing dentition and soft tissues. The purpose of this study was to assess the ceramic surface smoothness achieved with various commercially available ceramic polishing kits on different commonly used ceramic systems. The reliability of the cost of a polishing kit as an indicator of improved surface smoothness was assessed. A total of 350 ceramic surfaces representing 5 commonly available ceramic systems (IPS Empress Esthetic, IPS e.max Press, Cergo Kiss, Vita PM 9, Imagine PressX) were treated with 5 types of ceramic polishing systems (Cerapreshine, 94006C, Ceramiste, Optrafine, Zenostar) by following the manufacturers' guidelines. The surface roughness was measured with a profilometer (Taylor Hobson; Precision Taylor Hobson Ltd). The effects of ceramic systems and polishing kits of interest on surface roughness were analyzed by 2-way ANOVA, paired t test, and Bonferroni corrected significance level. The ceramic systems and polishing kits statistically affected surface roughness (Pceramic surface. No correlation could be established between the high cost of the polishing kit and low surface roughness. None of the commonly used ceramic polishing kits could create a surface smoother than that of glazed ceramic (Pceramic polishing kits is not recommended as a reliable indicator of better performance of ceramic polishing kits (P>.30). Copyright © 2015 Editorial Council for the Journal of Prosthetic Dentistry. Published by Elsevier Inc. All rights reserved.

Wine Traceability: A Data Model and Prototype in Albanian Context.

Science.gov (United States)

Vukatana, Kreshnik; Sevrani, Kozeta; Hoxha, Elira

2016-02-17

Vine traceability is a critical issue that has gained interest internationally. Quality control programs and schemes are mandatory in many countries including EU members and the USA. Albania has transformed most of the EU regulations on food into laws. Regarding the vine sector, the obligation of wine producers to keep traceability data is part of the legislation. The analysis on the interviews conducted with Albanian winemakers show that these data are actually recorded only in hard copy. Another fact that emerges from the interviews is that only two producers have implemented the ISO (International Organization for Standardization) standards on food. The purpose of this paper is to develop an agile and automated traceability system based on these standards. We propose a data model and system prototype that are described in the second and third section of this work. The data model is an adaption along the lines of the GS1 (Global Standards One) specifications for a wine supply chain. The proposed prototype has a key component that is mobile access to the information about wine through barcode technology. By using this mechanism the consumer obtains transparency on his expectations concerning the quality criteria. Another important component of the proposed system in this paper is a real-time notification module that works as an alert system when a risk is identified. This can help producers and authorities to have a rapid identification of a contaminated product. It is important in cases when recalling the product from the market or preventing it from reaching the consumer.

Wine Traceability: A Data Model and Prototype in Albanian Context

Directory of Open Access Journals (Sweden)

Kreshnik Vukatana

2016-02-01

Full Text Available Vine traceability is a critical issue that has gained interest internationally. Quality control programs and schemes are mandatory in many countries including EU members and the USA. Albania has transformed most of the EU regulations on food into laws. Regarding the vine sector, the obligation of wine producers to keep traceability data is part of the legislation. The analysis on the interviews conducted with Albanian winemakers show that these data are actually recorded only in hard copy. Another fact that emerges from the interviews is that only two producers have implemented the ISO (International Organization for Standardization standards on food. The purpose of this paper is to develop an agile and automated traceability system based on these standards. We propose a data model and system prototype that are described in the second and third section of this work. The data model is an adaption along the lines of the GS1 (Global Standards One specifications for a wine supply chain. The proposed prototype has a key component that is mobile access to the information about wine through barcode technology. By using this mechanism the consumer obtains transparency on his expectations concerning the quality criteria. Another important component of the proposed system in this paper is a real-time notification module that works as an alert system when a risk is identified. This can help producers and authorities to have a rapid identification of a contaminated product. It is important in cases when recalling the product from the market or preventing it from reaching the consumer.

Detection of Vandalism in Wikipedia using Metadata Features – Implementation in Simple English and Albanian sections

Directory of Open Access Journals (Sweden)

Arsim Susuri

2017-03-01

Full Text Available In this paper, we evaluate a list of classifiers in order to use them in the detection of vandalism by focusing on metadata features. Our work is focused on two low resource data sets (Simple English and Albanian from Wikipedia. The aim of this research is to prove that this form of vandalism detection applied in one data set (language can be extended into another data set (language. Article views data sets in Wikipedia have been used rarely for the purpose of detecting vandalism. We will show the benefits of using article views data set with features from the article revisions data set with the aim of improving the detection of vandalism. The key advantage of using metadata features is that these metadata features are language independent and simple to extract because they require minimal processing. This paper shows that application of vandalism models across low resource languages is possible, and vandalism can be detected through view patterns of articles.

Science and Library in the Ancient Age

Directory of Open Access Journals (Sweden)

Hasan Sacit Keseroğlu

2016-09-01

Full Text Available Science assumes its contemporary identity as a result of the stages of magic, religion and reason. The religious stage starts with the invention of writing and this stage leaves its place to reason with Thales in Ancient Greece. Knowledge eludes from religious beliefs. Ways to reach accurate, reliable and realistic knowledge are sought, along with the answer for what knowledge is. Therefore, beginning of the science is taken into consideration together with science and philosophy. The purpose of this study is to approach knowledge and science of the ancient age in Mesopotamia, Egypt and Ancient Greece in general terms and to determine the relationship between the knowledge produced in those places and libraries established. The hypothesis has been determined as “Egypt and Mesopotamia at the starting point of the history of science and science, and libraries in Ancient Greece have developed parallelly to each other.” The scope of the study has been limited to Mesopotamia, Egypt and Ancient Greece; and Ancient Greece has been explained, with descriptive method, in the frame of the topics of Ionia, Athens, Hellenistic Period and Rome. Many archives and libraries have been established in the ancient age. The difference between an archive and a library has been mentioned first, and then, various libraries have been introduced such as Nineveh in Mesopotamia, Alexandria in Ancient Greece and many others in Egypt. It has been clearly distinguished that there had been a very tight relationship between knowledge production and library, especially with the Library of Alexandria.

Ceramic joining

Energy Technology Data Exchange (ETDEWEB)

Loehman, R.E. [Sandia National Lab., Albuquerque, NM (United States)

1996-04-01

This paper describes the relation between reactions at ceramic-metal interfaces and the development of strong interfacial bonds in ceramic joining. Studies on a number of systems are described, including silicon nitrides, aluminium nitrides, mullite, and aluminium oxides. Joints can be weakened by stresses such as thermal expansion mismatch. Ceramic joining is used in a variety of applications such as solid oxide fuel cells.

Industrial ceramics - Properties, forming and applications

International Nuclear Information System (INIS)

Fantozzi, Gilbert; Niepce, Jean-Claude; Bonnefont, Guillaume; Alary, J.A.; Allard, B.; Ayral, A.; Bassat, J.M.; Elissalde, C.; Maglione, M.; Beauvy, M.; Bertrand, G.; Bignon, A.; Billieres, D.; Blanc, J.J.; Blumenfeld, P.; Bonnet, J.P.; Bougoin, M.; Bourgeon, M.; Boussuge, M.; Thorel, A.; Bruzek, C.E.; Cambier, F.; Carrerot, H.; Casabonne, J.M.; Chaix, J.M.; Chevalier, J.; Chopinet, M.H.; Couque, H.; Courtois, C.; Leriche, A.; Dhaler, D.; Denape, J.; Euzen, P.; Ganne, J.P.; Gauffinet, S.; Girard, A.; Gonon, M.; Guizard, C.; Hampshire, S.; Joulin, J.P.; Julbe, A.; Ferrato, M.; Fontaine, M.L.; Lebourgeois, R.; Lopez, J.; Maquet, M.; Marinel, S.; Marrony, M.; Martin, J.F.; Mougin, J.; Pailler, R.; Pate, M.; Petitpas, E.; Pijolat, C.; Pires-Franco, P.; Poirier, C.; Poirier, J.; Pourcel, F.; Potier, A.; Tulliani, J.M.; Viricelle, J.P.; Beauger, A.

2013-01-01

After a general introduction to ceramics (definition, general properties, elaboration, applications, market data), this book address conventional ceramics (elaboration, material types), thermo-structural ceramics (oxide based ceramics, non-oxide ceramics, fields of application, functional coatings), refractory ceramics, long fibre and ceramic matrix composites, carbonaceous materials, ceramics used for filtration, catalysis and the environment, ceramics for biomedical applications, ceramics for electronics and electrical engineering (for capacitors, magnetic, piezoelectric, dielectric ceramics, ceramics for hyper-frequency resonators), electrochemical ceramics, transparent ceramics (forming and sintering), glasses, mineral binders. The last chapter addresses ceramics used in the nuclear energy sector: in nuclear fuels and fissile material, absorbing ceramics and shields, in the management of nuclear wastes, new ceramics for reactors under construction or for future nuclear energy

Paleo-Environmental Reconstruction Using Ancient DNA

DEFF Research Database (Denmark)

Pedersen, Mikkel Winther

The aim of this thesis has been to investigate and expand the methodology and applicability for using ancient DNA deposited in lake sediments to detect and determine its genetic sources for paleo-environmental reconstruction. The aim was furthermore to put this tool into an applicable context...... solving other scientifically interesting questions. Still in its childhood, ancient environmental DNA research has a large potential for still developing, improving and discovering its possibilities and limitations in different environments and for identifying various organisms, both in terms...... research on ancient and modern environmental DNA (Paper 1), secondly by setting up a comparative study (Paper 2) to investigate how an ancient plant DNA (mini)-barcode can reflect other traditional methods (e.g. pollen and macrofossils) for reconstructing floristic history. In prolongation of the results...

AN INTERESTING CASE OF ANCIENT SCHWANNOMA

Directory of Open Access Journals (Sweden)

Binu

2015-01-01

Full Text Available INTRODUCTION : Schwannoma is a common benign tumour of nerve sheath. Degenerating type of schwannoma is called ancient schwannoma. Ancient schwannomas of scalp are rare and are often misdiagnosed as sebaceous cyst or dermoid cyst. CASE REPORT : We present a thirty two year old male presented with scalp swel ling of eight years duration. X - ray showed no intracranial extension. He underwent excision of the tumour and histopathology was reported as ancient schwannoma. DISCUSSION : Histopathologically , ancient schwannomas charecterised by cellular Antoni type A ar eas and less cellular Antoni type - B areas. 9 th , 7 th , 11 th , 5 th and 4 th cranial nerves are often affected and may be associated with multiple neuro fibramatosis (Von - Recklinghausen’s disease. Impact : Case is presented for its rarity and possible pre - operative misdiagnosis

On Ancient Babylonian Algebra and Geometry

Indian Academy of Sciences (India)

ber system prevalent during the ancient Mesopotamian civilization. In this article, we study the ... civilization provides a better insight into the thought processes of the ancient Babylonian mathematicians. In this context, consider the following ...

Assessment of legal adult age of 18 by measurement of open apices of the third molars: Study on the Albanian sample.

Science.gov (United States)

Cameriere, Roberto; Santoro, Valeria; Roca, Roberta; Lozito, Piercarlo; Introna, Francesco; Cingolani, Mariano; Galić, Ivan; Ferrante, Luigi

2014-12-01

The third molar tooth is one of the few anatomical structures in development available for estimating the age of individuals in the late adolescence. This study tests the accuracy of Cameriere's cut-off value of the third molar index (I3M) in assessing legal adult age of 18 years in an Albanian sample. For this purpose, a sample of orthopantomograms (OPTs) of 286 living subjects (152 female and 134 male) aged between 15 and 22 years was analyzed. Intra-rater and inter-raters agreement of I3M were 0.998 and 0.998, respectively and Cohen Kappa for intra-rater and inter-rater agreement in decision on adult or minor was 1.0 and 1.0, respectively. Age distribution gradually decreases as I3M increases in both males and females. The mean age of females is higher than that of males when I3M is between 0.04 and 0.08. Sensitivity test for males was 94.1%, with a 95% confidence interval (95% CI) 85.6-98.4%, and specificity was 90.9% (95%CI 81.3-96.6%). The proportion of correctly classified individuals was 92.5%, with a 95%CI of (86.7%, 96.4%). For females, the sensitivity test was 75.4%, with a 95%CI of (63.1%, 85.2%) and specificity was 96.6%, with a 95%CI of (90.3%, 99.3%). The proportion of correctly classified individuals was 87.5%, with a 95%CI of (81.2%, 92.3%). The results indicate that Cameriere's cut-off value of the third molar index (I3M=0.08) is useful in discriminating between Albanian adults and juveniles, and encourage us to test its suitability for determining the adult age in individuals from other populations. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Ancient Biomolecules and Evolutionary Inference.

Science.gov (United States)

Cappellini, Enrico; Prohaska, Ana; Racimo, Fernando; Welker, Frido; Pedersen, Mikkel Winther; Allentoft, Morten E; de Barros Damgaard, Peter; Gutenbrunner, Petra; Dunne, Julie; Hammann, Simon; Roffet-Salque, Mélanie; Ilardo, Melissa; Moreno-Mayar, J Víctor; Wang, Yucheng; Sikora, Martin; Vinner, Lasse; Cox, Jürgen; Evershed, Richard P; Willerslev, Eske

2018-04-25

Over the last decade, studies of ancient biomolecules-particularly ancient DNA, proteins, and lipids-have revolutionized our understanding of evolutionary history. Though initially fraught with many challenges, the field now stands on firm foundations. Researchers now successfully retrieve nucleotide and amino acid sequences, as well as lipid signatures, from progressively older samples, originating from geographic areas and depositional environments that, until recently, were regarded as hostile to long-term preservation of biomolecules. Sampling frequencies and the spatial and temporal scope of studies have also increased markedly, and with them the size and quality of the data sets generated. This progress has been made possible by continuous technical innovations in analytical methods, enhanced criteria for the selection of ancient samples, integrated experimental methods, and advanced computational approaches. Here, we discuss the history and current state of ancient biomolecule research, its applications to evolutionary inference, and future directions for this young and exciting field. Expected final online publication date for the Annual Review of Biochemistry Volume 87 is June 20, 2018. Please see http://www.annualreviews.org/page/journal/pubdates for revised estimates.

Tribology of ceramics: Report of the Committee on Tribology of Ceramics

Science.gov (United States)

1988-01-01

The current state of knowledge of ceramic surface structures, composition, and reactivity is reviewed. The tribological requirements of advanced mechanical systems now being deployed (in particular, heat engines) exceed the capabilities of traditional metallic-based materials because of the high temperatures encountered. Advanced ceramic materials for such applications are receiving intense scrutiny, but there is a lack of understanding of the properties and behavior of ceramic surfaces and the influence of processing on the properties of ceramics is described. The adequacy of models, ranging form atomic to macro, to describe and to predict ceramic friction and wear are discussed, as well as what is known about lubrication at elevated temperatures. From this analysis, recommendations are made for coordination, research, and development that will lead to better performance of ceramic materials in tribological systems.

Neutron activation analysis of bird bowls and related archaic ceramics from Miletus

International Nuclear Information System (INIS)

Kerschner, M.; Mommsen, H.; Beier, T.; Heimermann, D.; Hein, A.

1993-01-01

In this paper we present the results of a chemical investigation by neutron activation analysis of sherds of different kinds of bird kotylai, bird bowls and related wares excavated in Kalabaktepe, a hill of the ancient city of Miletus. A new archaeological classification of this well-known group of Archaic ceramics of eastern Greece is presented. A number of kiln wasters of misfired vessels from Kalabaktepe revealed a characteristic local pattern. This pattern helped to clarify the provenance of some of the bird bowls classified archaeologically as of orientalizing type: they have been made in Miletus. But bird kotylai and bird bowls in the ''standard fabric'' as well as other archaeologically related vessels show a different chemical pattern of unknown provenance. (author)

Neutron activation analysis of bird bowls and related archaic ceramics from Miletus

International Nuclear Information System (INIS)

Kerschner, M.; Mommsen, H.; Beier, T.; Heimermann, D.; Hein, A.

1993-01-01

In this paper we present the results of a chemical investigation by neutron activation analysis of sherds of different kinds of bird kotylai, bird bowls and related wares excavated in Kalabaktepe, a hill of the ancient city of Miletus. A new archaeological classification of this well-known group of Archaic ceramics of eastern Greece is represented. A number of kiln wasters of misfired vessels from Kalabaktepe revealed a characteristic local pattern. This pattern helped to clarify the provenance of some of the bird bowls classified archaeologically as of orientalizing type: they have been made in Miletus. But bird kotylai and bird bowls in the 'standard fabric' as well as other archaeologically related vessels show a different chemical pattern of unknown provenance. (author)

Distorting the ceramic familiar: materiality and non-ceramic intervention, Conference, Keramik Museum, Germany

OpenAIRE

Livingstone, Andrew

2009-01-01

Invited conference speaker, Westerwald Keramik Museum, August 2009. Paper title: Distorting the ceramic familiar: materiality and non-ceramic intervention.\\ud \\ud This paper will examine the integration of non-ceramic media into the discourse of ceramics.

Formulation and synthesis by melting process of titanate enriched glass-ceramics and ceramics

International Nuclear Information System (INIS)

Advocat, T.; Fillet, C.; Lacombe, J.; Bonnetier, A.; McGlinn, P.

1999-01-01

The main objective of this work is to provide containment for the separated radionuclides in stable oxide phases with proven resistance to leaching and irradiation damage and in consequence to obtain a glass ceramic or a ceramic material using a vitrification process. Sphene glass ceramic, zirconolite glass ceramic and zirconolite enriched ceramic have been fabricated and characterized by XRD, SEM/EDX and DTA

Trepanation in Ancient China.

Science.gov (United States)

Hobert, Leah; Binello, Emanuela

2017-05-01

Trepanation, the process of making a burr hole in the skull to access the brain, is an ancient form of a primitive craniotomy. There is widespread evidence of contributions made to this practice by ancient civilizations in Europe, Africa, and South America, where archaeologists have unearthed thousands of trepanned skulls dating back to the Neolithic period. Little is known about trepanation in China, and it is commonly believed that the Chinese used only traditional Chinese medicine and nonsurgical methods for treating brain injuries. However, a thorough analysis of the available archeological and literary evidence reveals that trepanation was widely practiced throughout China thousands of years ago. A significant number of trepanned Chinese skulls have been unearthed showing signs of healing and suggesting that patients survived after surgery. Trepanation was likely performed for therapeutic and spiritual reasons. Medical and historical works from Chinese literature contain descriptions of primitive neurosurgical procedures, including stories of surgeons, such as the legendary Hua Tuo, and surgical techniques used for the treatment of brain pathologies. The lack of translation of Chinese reports into the English language and the lack of publications on this topic in the English language may have contributed to the misconception that ancient China was devoid of trepanation. This article summarizes the available evidence attesting to the performance of successful primitive cranial surgery in ancient China. Copyright © 2016 Elsevier Inc. All rights reserved.

Mechanisms in ancient Chinese books with illustrations

CERN Document Server

Hsiao, Kuo-Hung

2014-01-01

This book presents a unique approach for studying mechanisms and machines with drawings that were depicted unclearly in ancient Chinese books. The historical, cultural and technical backgrounds of the mechanisms are explained, and various mechanisms described and illustrated in ancient books are introduced. By utilizing the idea for the conceptual design of modern mechanisms, all feasible designs of ancient mechanisms with uncertain members and joints that meet the technical standards of the subjects’ time periods are synthesized systematically. Ancient Chinese crossbows (the original crossbow and repeating crossbows), textile mechanisms (silk-reeling mechanism, spinning mechanisms, and looms), and many other artisan's tool mechanisms are used as illustrated examples.  Such an approach provides a logical method for the reconstruction designs of ancient mechanisms with uncertain structures. It also provides an innovative direction for researchers to further identify the original structures of mechanisms...

Green marketing as a key strategy for sustainable development: A case study of Albanian consumers

Directory of Open Access Journals (Sweden)

Anita Gumeni

2014-05-01

Full Text Available Recently efforts have been made in order to achieve sustainable development, which consists of social sustainability, economic sustainability and environmental sustainability in order to reach well-being of present and future generations. In our time the concern for environmental topics and sustainable development has been increasing. Accordingly companies are trying to design new strategies for gaining competitive advantage in the marketplace. Green marketing is one of such strategies used by marketers for reaching sustainable development. Companies need to know consumers' attitude and to adapt new marketing solutions with the focus on determining the expectations and satisfying their needs. In this paper we will attempt to examine the attitude of Albanian consumers toward eco-friendly products. The aim of the survey is to gather information from a consumer standpoint. We will apply various statistical analyses to investigate the demographic variable of consumers who are willing to pay an extra price for eco-friendly products. Findings demonstrate that the profile of consumers with a positive attitude towards eco-friendly products was more likely to be young educated women.

Endocrinology in ancient Sparta.

Science.gov (United States)

Tsoulogiannis, Ioannis N; Spandidos, Demetrios A

2007-01-01

This article attempts to analyze the crucial link between the plant Agnus castus and human health, particularly hormonal status, with special reference to the needs of the society of ancient Sparta. The ancient Spartans used Agnus both as a cure for infertility and as a remedy to treat battle wounds. These special properties were recognized by the sanctuary of Asclepios Agnita, which was located in Sparta, as well as by medical practitioners in Sparta during the classical, Hellenistic and Roman ages.

Economic and social activities on ancient Cypriot terraced landscapes.

Science.gov (United States)

Ridder, Elizabeth; Galletti, Christopher S; Fall, Patricia L; Falconer, Steven E

2017-11-01

We investigate ancient agricultural terraces and their associated social and economic activities across the site complex consisting of the village at Politiko-Troullia and its more extensive associated taskscape. Surface artifact distributions mapped over 12 ha are integrated with evidence excavated from this Bronze Age settlement in central Cyprus. Contrary to expectations, artifact densities do not diminish with distance from the village architecture. In particular, concentrations of Prehistoric Bronze Age ceramics and ground stone artifacts are most pronounced on nearby terraced hillsides. These terraces were not utilized for domestic structures, but for extensive processing of agricultural crops and copper ore. Bronze Age excavated plant remains indicate cultivation of olives, grapes and figs, with wood resources dominated by olive and pine. Larger, non-portable ground stones and gaming stones are associated with communal social and economic activities in open courtyard settings in Politiko-Troullia. This category of ground stone also is particularly common on the terraced hillsides around Troullia, suggesting that similar behaviors occurred beyond village structures. The terraced landscape of Politiko-Troullia exemplifies a multi-faceted taskscape with a range of agricultural, metallurgical and social activities. Copyright © 2016 Elsevier Ltd. All rights reserved.

The Nile floodplain, hydroclimatic variability, and its relation with cultural dynamics in ancient Thebes (Luxor, Egypt)

Science.gov (United States)

Toonen, Willem H. J.; Graham, Angus; Pennington, Ben; Hunter, Morag; Strutt, Kris; Barker, Dominic; Masson, Aurelia; Emery, Virginia

2016-04-01

The western bank of the river Nile in the Luxor region (Egypt) separates New Kingdom divine temple complexes in the central axis of the river valley from contemporaneous sites on the desert edge and limestone plateau. The intermediate Nile floodplain features relatively few known archaeological sites, but played an important role in the ancient ritual landscape by connecting the focal region of the living (floodplain) with that of the dead (desert). All Royal Funerary Temple Complexes of the New Kingdom period (1539-1077 BCE), which played a central role in the cosmogonical landscape, are positioned within a confined 3.5 km long strip of land on the western edge of the present floodplain. This preferential location, together with contemporary textual sources and tomb scenes suggesting the nearby presence of canals, have led to the hypothesis that natural and human-made waterways may have once connected the main channel of the Nile with the desert edge. Until the present research took place, no detailed study of pre-existing channel networks existed in the region, leaving a gap in current knowledge on the configuration and use of the ancient floodplain. This study presents the results of a multi-disciplinary study aimed at mapping and dating ancient waterways in the Theban region and aims to find evidence for the natural or human origin of such channels. Boreholes and Electric Resistivity Tomography (ERT) were carried out along a transect that connects the edge of the Holocene floodplain with the current position of the river Nile. Satellite imagery and textual sources were also used to augment the fieldwork. The data indicate the presence of an infilled abandoned channel of the Nile in the western distal part of the current floodplain, adjoining the Funerary Temple complexes. Over 2100 ceramic fragments were analysed from the sedimentary infilling of the silted-up river course, dating it to the end of the New Kingdom, and indicating that the channel and temples

Scale up issues involved with the ceramic waste form: ceramic-container interactions and ceramic cracking quantification

International Nuclear Information System (INIS)

Bateman, K. J.; DiSanto, T.; Goff, K. M.; Johnson, S. G.; O'Holleran, T.; Riley, W. P. Jr.

1999-01-01

Argonne National Laboratory is developing a process for the conditioning of spent nuclear fuel to prepare the material for final disposal. Two waste streams will result from the treatment process, a stainless steel based form and a ceramic based form. The ceramic waste form will be enclosed in a stainless steel container. In order to assess the performance of the ceramic waste form in a repository two factors must be examined, the surface area increases caused by waste form cracking and any ceramic/canister interactions that may release toxic material. The results indicate that the surface area increases are less than the High Level Waste glass and any toxic releases are below regulatory limits

Comparative scaffolding and gap filling of ancient bacterial genomes applied to two ancient Yersinia pestis genomes

Science.gov (United States)

Doerr, Daniel; Chauve, Cedric

2017-01-01

Yersinia pestis is the causative agent of the bubonic plague, a disease responsible for several dramatic historical pandemics. Progress in ancient DNA (aDNA) sequencing rendered possible the sequencing of whole genomes of important human pathogens, including the ancient Y. pestis strains responsible for outbreaks of the bubonic plague in London in the 14th century and in Marseille in the 18th century, among others. However, aDNA sequencing data are still characterized by short reads and non-uniform coverage, so assembling ancient pathogen genomes remains challenging and often prevents a detailed study of genome rearrangements. It has recently been shown that comparative scaffolding approaches can improve the assembly of ancient Y. pestis genomes at a chromosome level. In the present work, we address the last step of genome assembly, the gap-filling stage. We describe an optimization-based method AGapEs (ancestral gap estimation) to fill in inter-contig gaps using a combination of a template obtained from related extant genomes and aDNA reads. We show how this approach can be used to refine comparative scaffolding by selecting contig adjacencies supported by a mix of unassembled aDNA reads and comparative signal. We applied our method to two Y. pestis data sets from the London and Marseilles outbreaks, for which we obtained highly improved genome assemblies for both genomes, comprised of, respectively, five and six scaffolds with 95 % of the assemblies supported by ancient reads. We analysed the genome evolution between both ancient genomes in terms of genome rearrangements, and observed a high level of synteny conservation between these strains. PMID:29114402

Determination of the raw material source used in the production of ceramics of the Hatahara archaeological site, AM, Brazil

International Nuclear Information System (INIS)

Nunes, Kelly P.; Munita, Casimiro S.; Oliveira, Paulo T.M.S.; Neves, Eduardo G.; Kazuo, Eduardo T.; Soares, Emilio A.A.

2009-01-01

The archaeological interventions carried out at the Hatahara archaeological site, located in the central Amazonia, showed the presence of a great amount of ceramic artifacts in this region. As a consequence, several works have been conducted with this archaeological material, searching clear questions on how the ancient societies produced such objects, as well as, the use they did of the environment where they were inserted. Considering that the analysis of the ceramic material showed the simultaneous occurrence of four distinct phases of occupation in the Hatahara site, which, in relation to its pre-colonial composition is as an integral part of a quite complex context, the present work had the purpose of helping the Archaeologists to understand better the development of the societies that occupied this region, with basis on the study of the archaeological ceramics provenance. For this, the chemical characterization was done, with application of the analytical technique by neutron activation analysis (NAA); the elementary concentrations of As, Ba, Ce, Co, Cr, Cs, Eu Fe, Hf, K, La, Lu, Na, Nd, Rb, Sb, Sc, Ta, Tb, Th, U, Yb and Zn were determined in 127 ceramic fragments and in 7 samples of clay, collected next to the Hatahara archaeological site. The data of elementary concentrations were submitted to the multivariate statistical analysis, the techniques of cluster analysis and discriminant analysis. The results showed that a single type of clay was used in the manufacture of a group of 25 ceramic fragments, belonging to the phases Paredao, Manacapuru and Guarita. These results have been added to the archaeological interpretations with regard to the classification of the rescued ceramics fragments, in order to complement them. Therefore, this work supplied some pertinent clarifications that certainly will give support to the reconstruction of human path in the Hatahara archaeological site. (author)

Characterization techniques to predict mechanical behaviour of green ceramic bodies fabricated by ceramic microstereolithography

Science.gov (United States)

Adake, Chandrashekhar V.; Bhargava, Parag; Gandhi, Prasanna

2018-02-01

Ceramic microstereolithography (CMSL) has emerged as solid free form (SFF) fabrication technology in which complex ceramic parts are fabricated from ceramic suspensions which are formulated by dispersing ceramic particles in UV curable resins. Ceramic parts are fabricated by exposing ceramic suspension to computer controlled UV light which polymerizes resin to polymer and this polymer forms rigid network around ceramic particles. A 3-dimensional part is created by piling cured layers one over the other. These ceramic parts are used to build microelectromechanical (MEMS) devices after thermal treatment. In many cases green ceramic parts can be directly utilized to build MEMS devices. Hence characterization of these parts is essential in terms of their mechanical behaviour prior to their use in MEMS devices. Mechanical behaviour of these green ceramic parts depends on cross link density which in turn depends on chemical structure of monomer, concentrations of photoinitiator and UV energy dose. Mechanical behaviour can be determined with the aid of nanoindentation. And extent of crosslinking can be verified with the aid of DSC. FTIR characterization is used to analyse (-C=C-) double bond conversion. This paper explains characterization tools to predict the mechanical behaviour of green ceramic bodies fabricated in CMSL

Fracture-dissociation of ceramic liner.

Science.gov (United States)

Hwang, Sung Kwan; Oh, Jin-Rok; Her, Man Seung; Shim, Young Jun; Cho, Tae Yeun; Kwon, Sung Min

2008-08-01

The use of BIOLOX delta ceramic (CeramTec AG, Plochingen, Germany) has been increasing. This ceramic prevents cracking by restraining the phase transformation due to the insertion of nano-sized, yttria-stabilized tetragonal zirconia into the alumina matrix. This restrains the progress of cracking through the formation of platelet-like crystal or whiskers due to the addition of an oxide additive. We observed a case of BIOLOX delta ceramic liner (CeramTec AG) rim fracture 4 months postoperatively. Radiographs showed that the ceramic liner was subluxated from the acetabular cup. Scratches on the acetabular cup and femoral neck were seen, and the fracture was visible on the rim of the liner. Under electron microscope, metal particle coatings from the ceramic liner were identified. The ceramic liner, fracture fragments, and adjacent tissues were removed and replaced with a ceramic liner and femoral head of the same size and design. We believe the mechanism of the fracture-dissociation of the ceramic liner in this case is similar to a case of separation of the ceramic liner from the polyethylene shell in a sandwich-type ceramic-ceramic joint. To prevent ceramic liner fracture-dissociation, the diameter of the femoral neck needs to be decreased in a new design, while the diameter of the femoral head needs to be increased to ensure an increase in range of motion.

What every surgeon should know about Ceramic-on-Ceramic bearings in young patients

OpenAIRE

Hernigou, Philippe; Roubineau, Fran?ois; Bouthors, Charlie; Flouzat-Lachaniette, Charles-Henri

2016-01-01

Based on the exceptional tribological behaviour and on the relatively low biological activity of ceramic particles, Ceramic-on-Ceramic (CoC) total hip arthroplasty (THA) presents significant advantages CoC bearings decrease wear and osteolysis, the cumulative long-term risk of dislocation, muscle atrophy, and head-neck taper corrosion. However, there are still concerns regarding the best technique for implantation of ceramic hips to avoid fracture, squeaking, and revision of ceramic hips with...

Tamga-Shaped Symbols on Ceramics from the Sites of Otrar Oasis of the Pre-Arabic Period

Directory of Open Access Journals (Sweden)

Baipakov Karl M.

2017-09-01

Full Text Available The article considers tamga-shaped symbols from excavations at Pshakshitobe, Besinshitobe and Kuyuk-Mardan settlements in Southern Kazakhstan. Tamga symbols on ceramics are represented by various types. They are distinguished by clearly defined application techniques. A vast majority of symbols are based on absolutely straight lines with generally rounded ends. A comparison of tamga-shaped symbols with pasted ornaments frequently encountered in the material culture of Kanguy tribes in the basin of the Syrdaria allows to consider the former as Kanguy. Perhaps, some of them were subsequently used by the local rulers of Chach and Khwarezm. Counterparts of the symbols in questions have been discovered in materials from Achaemenid Iran, ancient Khwarezm and Sarmatiya of 1st –3rd centuries A.D., and the Middle Syrdaria region of 1st – 8th centuries A.D. Further identification and study of tamgas on the ceramics from Otrar oasis with the involvement of materials from excavations will probably allow to draw more substantiated conclusions with respect to their dating and attribution.

Ceramic Parts for Turbines

Science.gov (United States)

Jones, R. D.; Carpenter, Harry W.; Tellier, Jim; Rollins, Clark; Stormo, Jerry

1987-01-01

Abilities of ceramics to serve as turbine blades, stator vanes, and other elements in hot-gas flow of rocket engines discussed in report. Ceramics prime candidates, because of resistance to heat, low density, and tolerance of hostile environments. Ceramics considered in report are silicon nitride, silicon carbide, and new generation of such ceramic composites as transformation-toughened zirconia and alumina and particulate- or whisker-reinforced matrices. Report predicts properly designed ceramic components viable in advanced high-temperature rocket engines and recommends future work.

Geologically ancient DNA: fact or artefact?

DEFF Research Database (Denmark)

Hebsgaard, Martin Bay; Phillips, Matthew J.; Willerslev, Eske

2005-01-01

Studies continue to report ancient DNA sequences and viable microbial cells that are many millions of years old. In this paper we evaluate some of the most extravagant claims of geologically ancient DNA. We conclude that although exciting, the reports suffer from inadequate experimental setup and...

A scientific approach to the attribution problem of renaissance ceramic productions based on chemical and mineralogical markers

Science.gov (United States)

Padeletti, G.; Fermo, P.

2010-09-01

Renaissance lustred majolica shards from Gubbio and Deruta (Central Italy) were investigated in order to point out differences in chemical and mineralogical composition between these two very similar Italian potteries and furthermore to find correlations with the local raw clay materials probably used for their production. Chemical and mineralogical analysis on the ceramic body were performed by ICP-OES (inductively coupled plasma optical emission spectroscopy) and XRD (X-ray diffraction), respectively. Investigation of the ceramic body revealed significant differences on calcium content indicating that it could be used as a marker for the two different productions. A separation of the ceramic shards in groups, on the base of their provenance, has been achieved applying to the data set formed by the chemical compositional data some multivariate techniques, such as PCA (principal component analysis) and HCA (hierarchical cluster analysis). Even the mineralogical composition of the groups shows very interesting features, differing Gubbio production from Deruta one for the presence of several mineralogical species. The investigations carried out on clays that were collected in the two geographical places have confirmed these differences. In fact, the clay materials have a chemical composition coherent with that one found in the shards. Firing tests performed by heating these clay in different conditions (temperature and soaking time) have shown a different behaviour as concerns the formation of the minerals and it is compatible with the shard composition found. From the comparison between the fired clay and the ceramic shards, some assumptions about the firing conditions applied by the ancient potters have been drawn.

Oxide ceramics

International Nuclear Information System (INIS)

Ryshkewitch, E.; Richerson, D.W.

1985-01-01

The book explores single-phase ceramic oxide systems from the standpoint of physical chemistry and technology. This second edition also focuses on advances in technology since publication of the original edition. These include improvements in raw materials and forming and sintering techniques, and the major role that oxide ceramics have had in development of advanced products and processes. The text is divided into five major sections: general fundamentals of oxide ceramics, advances in aluminum oxide technology, advances in zirconia technology, and advances in beryllium oxide technology

The conscious of Nightmares in ancient China

OpenAIRE

西林, 眞紀子

2006-01-01

The analaysis concerns Nightmares in ancient China. People in ancient China were very afraid of Nightmares. Nightmares are described in the『春秋左氏傳』etc. The exocis Nightmares is described in the『周禮』. The ceremony "難" of exocis Nightmares in the『禮記』. In the characters Meng (夢) had the conscious of Nightmares in ancient China. The analaysis is about the characters 'Meng', about the characters of the relationship 'Meng'

Unriddling of ancient-medieval culture by PIXE

International Nuclear Information System (INIS)

Uda, M.

1997-01-01

Some examples are given for unriddling of ancient-medieval culture by PIXE. Effectiveness of PIXE to analyze art and archaeological objects is also explained. Objects employed here are 1) red, yellow, blue and white pigments painted on sun-dried bricks excavated in Egypt, 2) ancient glass beads used in the Near East, 3) South American mummy hair, 4) ancient slag excavated from Kansai-district, Japan 5) ink used by Galileo Galilei and 6) Renaissance style enameled gold jewelry. (author)

Y-TZP ceramic processing from coprecipitated powders: a comparative study with three commercial dental ceramics.

Science.gov (United States)

Lazar, Dolores R R; Bottino, Marco C; Ozcan, Mutlu; Valandro, Luiz Felipe; Amaral, Regina; Ussui, Valter; Bressiani, Ana H A

2008-12-01

(1) To synthesize 3mol% yttria-stabilized zirconia (3Y-TZP) powders via coprecipitation route, (2) to obtain zirconia ceramic specimens, analyze surface characteristics, and mechanical properties, and (3) to compare the processed material with three reinforced dental ceramics. A coprecipitation route was used to synthesize a 3mol% yttria-stabilized zirconia ceramic processed by uniaxial compaction and pressureless sintering. Commercially available alumina or alumina/zirconia ceramics, namely Procera AllCeram (PA), In-Ceram Zirconia Block (CAZ) and In-Ceram Zirconia (IZ) were chosen for comparison. All specimens (6mmx5mmx5mm) were polished and ultrasonically cleaned. Qualitative phase analysis was performed by XRD and apparent densities were measured on the basis of Archimedes principle. Ceramics were also characterized using SEM, TEM and EDS. The hardness measurements were made employing Vickers hardness test. Fracture toughness (K(IC)) was calculated. Data were analyzed using one-way analysis of variance (ANOVA) and Tukey's test (alpha=0.05). ANOVA revealed that the Vickers hardness (pceramic materials composition. It was confirmed that the PA ceramic was constituted of a rhombohedral alumina matrix, so-called alpha-alumina. Both CAZ and IZ ceramics presented tetragonal zirconia and alpha-alumina mixture of phases. The SEM/EDS analysis confirmed the presence of aluminum in PA ceramic. In the IZ and CAZ ceramics aluminum, zirconium and cerium in grains involved by a second phase containing aluminum, silicon and lanthanum were identified. PA showed significantly higher mean Vickers hardness values (H(V)) (18.4+/-0.5GPa) compared to vitreous CAZ (10.3+/-0.2GPa) and IZ (10.6+/-0.4GPa) ceramics. Experimental Y-TZP showed significantly lower results than that of the other monophased ceramic (PA) (pceramics (pceramic processing conditions led to ceramics with mechanical properties comparable to commercially available reinforced ceramic materials.

Ceramic matrix composite article and process of fabricating a ceramic matrix composite article

Science.gov (United States)

Cairo, Ronald Robert; DiMascio, Paul Stephen; Parolini, Jason Robert

2016-01-12

A ceramic matrix composite article and a process of fabricating a ceramic matrix composite are disclosed. The ceramic matrix composite article includes a matrix distribution pattern formed by a manifold and ceramic matrix composite plies laid up on the matrix distribution pattern, includes the manifold, or a combination thereof. The manifold includes one or more matrix distribution channels operably connected to a delivery interface, the delivery interface configured for providing matrix material to one or more of the ceramic matrix composite plies. The process includes providing the manifold, forming the matrix distribution pattern by transporting the matrix material through the manifold, and contacting the ceramic matrix composite plies with the matrix material.

A fractographic study of clinically retrieved zirconia–ceramic and metal–ceramic fixed dental prostheses

Science.gov (United States)

Pang, Zhen; Chughtai, Asima; Sailer, Irena; Zhang, Yu

2015-01-01

Objectives A recent 3-year randomized controlled trial (RCT) of tooth supported three- to five-unit zirconia–ceramic and metal–ceramic posterior fixed dental prostheses (FDPs) revealed that veneer chipping and fracture in zirconia–ceramic systems occurred more frequently than those in metal–ceramic systems [1]. This study seeks to elucidate the underlying mechanisms responsible for the fracture phenomena observed in this RCT using a descriptive fractographic analysis. Methods Vinyl-polysiloxane impressions of 12 zirconia–ceramic and 6 metal–ceramic FDPs with veneer fractures were taken from the patients at the end of a mean observation of 40.3 ± 2.8 months. Epoxy replicas were produced from these impressions [1]. All replicas were gold coated, and inspected under the optical microscope and scanning electron microscope (SEM) for descriptive fractography. Results Among the 12 zirconia–ceramic FDPs, 2 had small chippings, 9 had large chippings, and 1 exhibited delamination. Out of 6 metal–ceramic FDPs, 5 had small chippings and 1 had large chipping. Descriptive fractographic analysis based on SEM observations revealed that fracture initiated from the wear facet at the occlusal surface in all cases, irrespective of the type of restoration. Significance Zirconia–ceramic and metal–ceramic FDPs all fractured from microcracks that emanated from occlusal wear facets. The relatively low fracture toughness and high residual tensile stress in porcelain veneer of zirconia restorations may contribute to the higher chipping rate and larger chip size in zirconia–ceramic FDPs relative to their metal–ceramic counterparts. The low veneer/core interfacial fracture energy of porcelain-veneered zirconia may result in the occurrence of delamination in zirconia–ceramic FDPs. PMID:26233469

[Comparison of color reappearance between metal-ceram restoration and foundry-ceram restoration using crystaleye spectrophotometer].

Science.gov (United States)

Shi, Tao; Zhang, Ning; Kong, Fan-wen; Zhan, De-song

2010-10-01

To study the color reappearance effect of metal-ceram restoration and foundry-ceram restoration using Crystaleye spectrophotometer. 58 metal-ceram restorations and 58 foundry-ceram restorations according to the result of the Crystaleye spectrophotometer were made respectively. The deltaE between restorations and natural teeth as referenced were analyzed. And satisfaction of dentists and patients were evaluated. The deltaE between metal-ceram restorations and natural teeth was 7.13 +/- 0.74. The deltaE between foundry-ceram restorations and teeth was 1.47 +/- 0.84. There were statistical differences between the deltaE (P spectrophotometer can provide accurate reference for foundry-ceram restoration, but for metal-ceram restoration it is not accurate.

Werkstoffwoche 98. Vol. 7. Symposium 9: Ceramics. Symposium 14: Simulation of ceramics

International Nuclear Information System (INIS)

Heinrich, J.; Ziegler, G.; Hermel, W.; Riedel, H.

1999-01-01

The leading subject of this proceedings volume is ceramic materials, with papers on the following subject clusters: Processing (infiltration, sintering, forming) - Physics and chemistry of ceramics (functional ceramics, SiC, ceramic precursors, microstructural properties) - Novel concepts (composites, damage induced by oxidation and mechanical stress, performance until damage under mechanical and thermal stress, layers, nanocomposites). 28 of the conference papers have been prepared for individual retrieval from the ENERGY database. (orig./CB) [de

THE PHRASEOLOGY OF “HEAD” IN RELATION WITH BALKAN MENTALITY (CONTRASTIVE ANALYSIS OF THE PHRASEOLOGY OF ALBANIAN, BULGARIAN AND GREEK LANGUAGES

Directory of Open Access Journals (Sweden)

Eva ÇËRAVA (KANE

2014-05-01

Full Text Available The common points in the phraseology of Balkan languages are often attributed to some “Balkan cultural heritage”, a term which is usually not defined any further. So, this term can allow us to see how this her itage is represented in phraseology. First of all, the use of a systematic empirical research to describe these phraseological units serves to determine which idioms actually share a relatively identical lexical and semantic structure across the three lang uages and could therefore be called “widespread”. This article presents a contrastive study of the structures and semantics of phraseology units containing the word “head” in Albanian, Bulgarian and Greek languages. This approach can describe similarities and differences of mentality as reflected in phraseology.

Flight-vehicle materials, structures, and dynamics - Assessment and future directions. Vol. 3 - Ceramics and ceramic-matrix composites

Science.gov (United States)

Levine, Stanley R. (Editor)

1992-01-01

The present volume discusses ceramics and ceramic-matrix composites in prospective aerospace systems, monolithic ceramics, transformation-toughened and whisker-reinforced ceramic composites, glass-ceramic matrix composites, reaction-bonded Si3N4 and SiC composites, and chemical vapor-infiltrated composites. Also discussed are the sol-gel-processing of ceramic composites, the fabrication and properties of fiber-reinforced ceramic composites with directed metal oxidation, the fracture behavior of ceramic-matrix composites (CMCs), the fatigue of fiber-reinforced CMCs, creep and rupture of CMCs, structural design methodologies for ceramic-based materials systems, the joining of ceramics and CMCs, and carbon-carbon composites.

What every surgeon should know about Ceramic-on-Ceramic bearings in young patients.

Science.gov (United States)

Hernigou, Philippe; Roubineau, François; Bouthors, Charlie; Flouzat-Lachaniette, Charles-Henri

2016-04-01

Based on the exceptional tribological behaviour and on the relatively low biological activity of ceramic particles, Ceramic-on-Ceramic (CoC) total hip arthroplasty (THA) presents significant advantagesCoC bearings decrease wear and osteolysis, the cumulative long-term risk of dislocation, muscle atrophy, and head-neck taper corrosion.However, there are still concerns regarding the best technique for implantation of ceramic hips to avoid fracture, squeaking, and revision of ceramic hips with fracture of a component.We recommend that surgeons weigh the potential advantages and disadvantages of current CoC THA in comparison with other bearing surfaces when considering young very active patients who are candidates for THA. Cite this article: Hernigou P, Roubineau F, Bouthors C, Flouzat-Lachaniette C-H. What every surgeon should know about Ceramic-on-Ceramic bearings in young patients. EFORT Open Rev 2016;1:107-111. DOI: 10.1302/2058-5241.1.000027.

Method of sintering ceramic materials

Science.gov (United States)

Holcombe, Cressie E.; Dykes, Norman L.

1992-01-01

A method for sintering ceramic materials is described. A ceramic article is coated with layers of protective coatings such as boron nitride, graphite foil, and niobium. The coated ceramic article is embedded in a container containing refractory metal oxide granules and placed within a microwave oven. The ceramic article is heated by microwave energy to a temperature sufficient to sinter the ceramic article to form a densified ceramic article having a density equal to or greater than 90% of theoretical density.

Characterization and evaluation of ceramic properties of clay used in structural ceramics

International Nuclear Information System (INIS)

Reis, A.S.; Oliveira, J.N.; Della-Sagrillo, V.P.; Valenzuela-Diaz, F.R.

2014-01-01

The clay used in the manufacture of structural ceramic products must meet quality requirements that are influenced by their chemical, physical, mineralogical and microstructural characteristics, which control the ceramic properties of the final products. This paper aims to characterize the clay used in the manufacture of ceramic roof tiles and bricks. The clay was characterized through XRF, XRD, thermogravimetry and differential thermal analysis, Atterberg limits and particle size distribution. Specimens were shaped, dried at 110°C, and burned at 900 deg C in an industrial kiln. After that, they were submitted to tests of water absorption, apparent porosity, bulk density and flexural strength. The results show that the chemical composition of clay has significant amount of silica and alumina and adequate levels of kaolinite for use in structural ceramic. The ceramic properties evaluated in the specimens partially meet the requirements of the Brazilian standard-clays for structural ceramics. (author)

Forming of superplastic ceramics

Energy Technology Data Exchange (ETDEWEB)

Lesuer, D.R.; Wadsworth, J.; Nieh, T.G.

1994-05-01

Superplasticity in ceramics has now advanced to the stage that technologically viable superplastic deformation processing can be performed. In this paper, examples of superplastic forming and diffusion bonding of ceramic components are given. Recent work in biaxial gas-pressure forming of several ceramics is provided. These include yttria-stabilized, tetragonal zirconia (YTZP), a 20% alumina/YTZP composite, and silicon. In addition, the concurrent superplastic forming and diffusion bonding of a hybrid ceramic-metal structure are presented. These forming processes offer technological advantages of greater dimensional control and increased variety and complexity of shapes than is possible with conventional ceramic shaping technology.

Ceramic gas turbine shroud

Science.gov (United States)

Shi, Jun; Green, Kevin E.

2014-07-22

An example gas turbine engine shroud includes a first annular ceramic wall having an inner side for resisting high temperature turbine engine gasses and an outer side with a plurality of radial slots. A second annular metallic wall is positioned radially outwardly of and enclosing the first annular ceramic wall and has a plurality of tabs in communication with the slot of the first annular ceramic wall. The tabs of the second annular metallic wall and slots of the first annular ceramic wall are in communication such that the first annular ceramic wall and second annular metallic wall are affixed.

FOREWORD: Focus on Advanced Ceramics Focus on Advanced Ceramics

Science.gov (United States)

Ohashi, Naoki

2011-06-01

Much research has been devoted recently to developing technologies for renewable energy and improving the efficiency of the processes and devices used in industry and everyday life. Efficient solutions have been found using novel materials such as platinum and palladium-based catalysts for car exhaust systems, samarium-cobalt and neodymium-iron-boron permanent magnets for electrical motors, and so on. However, their realization has resulted in an increasing demand for rare elements and in their deficit, the development of new materials based on more abundant elements and new functionalities of traditional materials. Moreover, increasing environmental and health concerns demand substitution of toxic or hazardous substances with nature-friendly alternatives. In this context, this focus issue on advanced ceramics aims to review current trends in ceramics science and technology. It is related to the International Conference on Science and Technology of Advanced Ceramics (STAC) held annually to discuss the emerging issues in the field of ceramics. An important direction of ceramic science is the collaboration between experimental and theoretical sciences. Recent developments in density functional theory and computer technology have enabled the prediction of physical and chemical properties of ceramics, thereby assisting the design of new materials. Therefore, this focus issue includes articles devoted to theory and advanced characterization techniques. As mentioned above, the potential shortage of rare elements is becoming critical to the industry and has resulted in a Japanese government initiative called the 'Ubiquitous Element Strategy'. This focus issue also includes articles related to this strategy and to the associated topics of energy conversion, such as phosphors for high-efficiency lighting and photocatalysts for solar-energy harvesting. We hope that this focus issue will provide a timely overview of current trends and problems in ceramics science and

Reconstructing ancient genomes and epigenomes

DEFF Research Database (Denmark)

Orlando, Ludovic Antoine Alexandre; Gilbert, M. Thomas P.; Willerslev, Eske

2015-01-01

DNA studies have now progressed to whole-genome sequencing for an increasing number of ancient individuals and extinct species, as well as to epigenomic characterization. Such advances have enabled the sequencing of specimens of up to 1 million years old, which, owing to their extensive DNA damage...... and contamination, were previously not amenable to genetic analyses. In this Review, we discuss these varied technical challenges and solutions for sequencing ancient genomes and epigenomes....

Influence of ceramic thickness and ceramic materials on fracture resistance of posterior partial coverage restorations.

Science.gov (United States)

Bakeman, E M; Rego, N; Chaiyabutr, Y; Kois, J C

2015-01-01

This study evaluated the influence of ceramic thickness and ceramic materials on fracture resistance of posterior partial coverage ceramic restorations. Forty extracted molars were allocated into four groups (n=10) to test for two variables: 1) the thickness of ceramic (1 mm or 2 mm) and 2) the ceramic materials (a lithium disilicate glass-ceramic [IPS e.max] or leucite-reinforced glass ceramic [IPS Empress]). All ceramic restorations were luted with resin cement (Variolink II) on the prepared teeth. These luted specimens were loaded to failure in a universal testing machine, in the compression mode, with a crosshead speed of 1.0 mm/min. The data were analyzed using two-way analysis of variance and the Tukey Honestly Significantly Different multiple comparison test (α =0.05). The fracture resistance revealed a significant effect for materials (pceramic was not significant (p=0.074), and the interaction between the thickness of ceramic and the materials was not significant (p=0.406). Mean (standard deviation) fracture resistance values were as follows: a 2-mm thickness of a lithium disilicate bonded to tooth structure (2505 [401] N) revealed a significantly higher fracture resistance than did a 1-mm thickness of leucite-reinforced (1569 [452] N) and a 2-mm thickness of leucite-reinforced ceramic bonded to tooth structure (1716 [436] N) (pceramic at 1-mm thickness (2105 [567] N) and at 2-mm thickness. Using a lithium disilicate glass ceramic for partial coverage restoration significantly improved fracture resistance compared to using a leucite-reinforced glass ceramic. The thickness of ceramic had no significant effect on fracture resistance when the ceramics were bonded to the underlying tooth structure.

[Ancient Greek in modern language of medicine].

Science.gov (United States)

Marković, Vera

2007-01-01

In order to standardize language of medicine, it is essential to have a good command of ancient Greek and Latin. We cannot deny a huge impact of ancient Greek medicine on medical terminology. Compounds of Greek origin related to terms for organs, illnesses, inflammations, surgical procedures etc. have been listed as examples. They contain Greek prefixes and suffixes transcribed into Latin and they have been analysed. It may be concluded that the modern language of medicine basically represents the ancient Greek language transcribed into Latin.

The history of ceramic filters.

Science.gov (United States)

Fujishima, S

2000-01-01

The history of ceramic filters is surveyed. Included is the history of piezoelectric ceramics. Ceramic filters were developed using technology similar to that of quartz crystal and electro-mechanical filters. However, the key to this development involved the theoretical analysis of vibration modes and material improvements of piezoelectric ceramics. The primary application of ceramic filters has been for consumer-market use. Accordingly, a major emphasis has involved mass production technology, leading to low-priced devices. A typical ceramic filter includes monolithic resonators and capacitors packaged in unique configurations.

[Ceramic posts].

Science.gov (United States)

Mainjot, Amélie; Legros, Caroline; Vanheusden, Alain

2006-01-01

As a result of ceramics and all-ceram technologies development esthetic inlay core and abutments flooded the market. Their tooth-colored appearance enhances restoration biomimetism principally on the marginal gingiva area. This article reviews indications and types of cores designed for natural teeth and implants.

Deep sequencing of RNA from ancient maize kernels

DEFF Research Database (Denmark)

Fordyce, Sarah Louise; Avila Arcos, Maria del Carmen; Rasmussen, Morten

2013-01-01

The characterization of biomolecules from ancient samples can shed otherwise unobtainable insights into the past. Despite the fundamental role of transcriptomal change in evolution, the potential of ancient RNA remains unexploited - perhaps due to dogma associated with the fragility of RNA. We hy...... maize kernels. The results suggest that ancient seed transcriptomics may offer a powerful new tool with which to study plant domestication....

The provenance investigation on ancient chinese Ru porcelains by NAA

International Nuclear Information System (INIS)

Gao Zhengyao; Wang Jie; Chen Songhua

1997-01-01

The 28 samples of glazes and bodies of ancient Chinese Ru porcelains are analyzed by neutron activation. The 36 element contents in each sample are determined. The neutron activation analysis (NAA) data are analyzed by fuzzy cluster. The trend cluster diagram is obtained. The result shows that the ancient Chinese Ru porcelains were most probably from the same raw material source though they were from different time, fired in different kilns and in different colors. The near provenance relation between ancient Jun porcelain and ancient Ru porcelain is preliminarily analyzed. The two modern Ru porcelains approximate to ancient Ru porcelains, one becomes estranged from ancient Ru porcelains. Jingdezhen porcelain is unconcerned with Ru porcelains

Thin film ceramic thermocouples

Science.gov (United States)

Gregory, Otto (Inventor); Fralick, Gustave (Inventor); Wrbanek, John (Inventor); You, Tao (Inventor)

2011-01-01

A thin film ceramic thermocouple (10) having two ceramic thermocouple (12, 14) that are in contact with each other in at least on point to form a junction, and wherein each element was prepared in a different oxygen/nitrogen/argon plasma. Since each element is prepared under different plasma conditions, they have different electrical conductivity and different charge carrier concentration. The thin film thermocouple (10) can be transparent. A versatile ceramic sensor system having an RTD heat flux sensor can be combined with a thermocouple and a strain sensor to yield a multifunctional ceramic sensor array. The transparent ceramic temperature sensor that could ultimately be used for calibration of optical sensors.

Ancient Egyptian Medicine: A Systematic Review

Directory of Open Access Journals (Sweden)

Samuel Adu-Gyamfi

2015-12-01

Full Text Available Our present day knowledge in the area of medicine in Ancient Egypt has been severally sourced from medical papyri several of which have been deduced and analyzed by different scholars. For educational purposes it is always imperative to consult different literature or sources in the teaching of ancient Egypt and medicine in particular. To avoid subjectivity the author has found the need to re-engage the efforts made by several scholars in adducing evidences from medical papyri. In the quest to re-engage the efforts of earlier writers and commentaries on the medical papyri, we are afforded the opportunity to be informed about the need to ask further questions to enable us to construct or reconstruct both past and modern views on ancient Egyptian medical knowledge. It is this vocation the author sought to pursue in the interim, through a preliminary review, to highlight, comment and reinvigorate in the reader or researcher the need for a continuous engagement of some pertinent documentary sources on Ancient Egyptian medical knowledge for educational and research purposes. The study is based on qualitative review of published literature. The selection of those articles as sources was based on the focus of the review, in order to purposively select and comment on articles that were published based either on information from a medical papyrus or focused on medical specialization among the ancient Egyptians as well as ancient Egyptian knowledge on diseases and medicine. It was found that the Egyptians developed relatively sophisticated medical practices covering significant medical fields such as herbal medicine, gynecology and obstetrics, anatomy and physiology, mummification and even the preliminary form of surgery. These practices, perhaps, were developed as remedies for the prevailing diseases and the accidents that might have occurred during the construction of their giant pyramids. It must be stated that they were not without flaws. Also, the

Ancient Greek in modern language of medicine

Directory of Open Access Journals (Sweden)

Marković Vera

2007-01-01

Full Text Available In order to standardize language of medicine, it is essential to have a good command of ancient Greek and Latin. We cannot deny a huge impact of ancient Greek medicine on medical terminology. Compounds of Greek origin related to terms for organs, illnesses, inflammations, surgical procedures etc. have been listed as examples. They contain Greek prefixes and suffixes transcribed into Latin and they have been analyzed. It may be concluded that the modern language of medicine basically represents the ancient Greek language transcribed into Latin.

Suicide in ancient Greece.

Science.gov (United States)

Laios, K; Tsoukalas, G; Kontaxaki, M-I; Karamanou, M; Androutsos, G

2014-01-01

The theme of suicide appears several times in ancient Greek literature. However, each such reference acquires special significance depending on the field from which it originates. Most of the information found in mythology, but the suicide in a mythological tale, although in terms of motivation and mental situation of heroes may be in imitation of similar incidents of real life, in fact is linked with the principles of the ancient Greek religion. In ancient drama and mainly in tragedies suicide conduces to the tragic hypostasis of the heroes and to the evolution of the plot and also is a tool in order to be presented the ideas of poets for the relations of the gods, the relation among gods and men and the relation among the men. In ancient Greek philosophy there were the deniers of suicide, who were more concerned about the impact of suicide on society and also these who accepted it, recognizing the right of the individual to put an end to his life, in order to avoid personal misfortunes. Real suicides will be found mostly from historical sources, but most of them concern leading figures of the ancient world. Closer to the problem of suicide in the everyday life of antiquity are ancient Greek medicines, who studied the phenomenon more general without references to specific incidents. Doctors did not approve in principal the suicide and dealt with it as insane behavior in the development of the mental diseases, of melancholia and mania. They considered that the discrepancy of humors in the organ of logic in the human body will cause malfunction, which will lead to the absurdity and consequently to suicide, either due to excessive concentration of black bile in melancholia or due to yellow bile in mania. They believed that greater risk to commit suicide had women, young people and the elderly. As therapy they used the drugs of their time with the intention to induce calm and repression in the ill person, therefore they mainly used mandragora. In general, we would say

Ceramic heat exchanger

Science.gov (United States)

LaHaye, Paul G.; Rahman, Faress H.; Lebeau, Thomas P. E.; Severin, Barbara K.

1998-01-01

A tube containment system. The tube containment system does not significantly reduce heat transfer through the tube wall. The contained tube is internally pressurized, and is formed from a ceramic material having high strength, high thermal conductivity, and good thermal shock resistance. The tube containment system includes at least one ceramic fiber braid material disposed about the internally pressurized tube. The material is disposed about the tube in a predetermined axial spacing arrangement. The ceramic fiber braid is present in an amount sufficient to contain the tube if the tube becomes fractured. The tube containment system can also include a plurality of ceramic ring-shaped structures, in contact with the outer surface of the tube, and positioned between the tube and the ceramic fiber braid material, and/or at least one transducer positioned within tube for reducing the internal volume and, therefore, the energy of any shrapnel resulting from a tube fracture.

Large ceramics for fusion applications

International Nuclear Information System (INIS)

Hauth, W.E.; Stoddard, S.D.

1979-01-01

Prominent ceramic raw materials and products manufacturers were surveyed to determine the state of the art for alumina ceramic fabrication. This survey emphasized current capabilities and limitations for fabrication of large, high-density, high-purity, complex shapes. Some directions are suggested for future needs and development. Ceramic-to-ceramic sealing has applications for several technologies that require large and/or complex vacuum-tight ceramic shapes. Information is provided concerning the assembly of complex monolithic ceramic shapes by bonding of subassemblies at temperatures ranging from 450 to 1500 0 C. Future applications and fabrication techniques for various materials are presented

Clinical application of bio ceramics

Energy Technology Data Exchange (ETDEWEB)

Anu, Sharma, E-mail: issaranu@gmail.com; Gayatri, Sharma, E-mail: sharmagayatri@gmail.com [Department of Chemistry, Govt. College of Engineering & Technology, Bikaner, Rajasthan (India)

2016-05-06

Ceramics are the inorganic crystalline material. These are used in various field such as biomedical, electrical, electronics, aerospace, automotive and optical etc. Bio ceramics are the one of the most active areas of research. Bio ceramics are the ceramics which are biocompatible. The unique properties of bio ceramics make them an attractive option for medical applications and offer some potential advantages over other materials. During the past three decades, a number of major advances have been made in the field of bio ceramics. This review focuses on the use of these materials in variety of clinical scenarios.

Clinical application of bio ceramics

International Nuclear Information System (INIS)

Anu, Sharma; Gayatri, Sharma

2016-01-01

Ceramics are the inorganic crystalline material. These are used in various field such as biomedical, electrical, electronics, aerospace, automotive and optical etc. Bio ceramics are the one of the most active areas of research. Bio ceramics are the ceramics which are biocompatible. The unique properties of bio ceramics make them an attractive option for medical applications and offer some potential advantages over other materials. During the past three decades, a number of major advances have been made in the field of bio ceramics. This review focuses on the use of these materials in variety of clinical scenarios.

FIB/SEM and SEM/EDS microstructural analysis of metal-ceramic and zirconia-ceramic interfaces.

Science.gov (United States)

Massimi, F; Merlati, G; Sebastiani, M; Battaini, P; Menghini, P; Bemporad, E

2012-01-10

Recently introduced FIB/SEM analysis in microscopy seems to provide a high-resolution characterization of the samples by 3D (FIB) cross-sectioning and (SEM) high resolution imaging. The aim of this study was to apply the FIB/SEM and SEM/EDS analysis to the interfaces of a metal-ceramic vs. two zirconia-ceramic systems. Plate samples of three different prosthetic systems were prepared in the dental lab following the manufacturers' instructions, where metal-ceramic was the result of a ceramic veneering (porcelain-fused-to-metal) and the two zirconia-ceramic systems were produced by the dedicated CAD-CAM procedures of the zirconia cores (both with final sintering) and then veneered by layered or heat pressed ceramics. In a FIB/SEM equipment (also called DualBeam), a thin layer of platinum (1 μm) was deposited on samples surface crossing the interfaces, in order to protect them during milling. Then, increasingly deeper trenches were milled by a focused ion beam, first using a relatively higher and later using a lower ion current (from 9 nA to 0.28 nA, 30KV). Finally, FEG-SEM (5KV) micrographs (1000-50,000X) were acquired. In a SEM the analysis of the morphology and internal microstructure was performed by 13KV secondary and backscattered electrons signals (in all the samples). The compositional maps were then performed by EDS probe only in the metal-ceramic system (20kV). Despite the presence of many voids in all the ceramic layers, it was possible to identify: (1) the grain structures of the metallic and zirconia substrates, (2) the thin oxide layer at the metal-ceramic interface and its interactions with the first ceramic layer (wash technique), (3) the roughness of the two different zirconia cores and their interactions with the ceramic interface, where the presence of zirconia grains in the ceramic layer was reported in two system possibly due to sandblasting before ceramic firing.

Exploring Ancient Skies An Encyclopedic Survey of Archaeoastronomy

CERN Document Server

Kelley, David H

2005-01-01

Exploring Ancient Skies brings together the methods of archaeology and the insights of modern astronomy to explore the science of astronomy as it was practiced in various cultures prior to the invention of the telescope. The book reviews an enormous and growing body of literature on the cultures of the ancient Mediterranean, the Far East, and the New World (particularly Mesoamerica), putting the ancient astronomical materials into their archaeological and cultural contexts. The authors begin with an overview of the field and proceed to essential aspects of naked-eye astronomy, followed by an examination of specific cultures. The book concludes by taking into account the purposes of ancient astronomy: astrology, navigation, calendar regulation, and (not least) the understanding of our place and role in the universe. Skies are recreated to display critical events as they would have appeared to ancient observers - events such as the supernova of 1054, the 'lion horoscope' or the 'Star of Bethlehem.' Exploring An...

Ceramic hot-gas filter

Science.gov (United States)

Connolly, E.S.; Forsythe, G.D.; Domanski, D.M.; Chambers, J.A.; Rajendran, G.P.

1999-05-11

A ceramic hot-gas candle filter is described having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during back pulse cleaning and is resistant to chemical degradation at high temperatures.

Ceramic hot-gas filter

Science.gov (United States)

Connolly, Elizabeth Sokolinski; Forsythe, George Daniel; Domanski, Daniel Matthew; Chambers, Jeffrey Allen; Rajendran, Govindasamy Paramasivam

1999-01-01

A ceramic hot-gas candle filter having a porous support of filament-wound oxide ceramic yarn at least partially surrounded by a porous refractory oxide ceramic matrix, and a membrane layer on at least one surface thereof. The membrane layer may be on the outer surface, the inner surface, or both the outer and inner surface of the porous support. The membrane layer may be formed of an ordered arrangement of circularly wound, continuous filament oxide ceramic yarn, a ceramic filler material which is less permeable than the filament-wound support structure, or some combination of continuous filament and filler material. A particularly effective membrane layer features circularly wound filament with gaps intentionally placed between adjacent windings, and a filler material of ceramic particulates uniformly distributed throughout the gap region. The filter can withstand thermal cycling during backpulse cleaning and is resistant to chemical degradation at high temperatures.

Ceramic injection molding

International Nuclear Information System (INIS)

Agueda, Horacio; Russo, Diego

1988-01-01

Interest in making complex net-shape ceramic parts with good surface finishing and sharp tolerances without machining is a driving force for studying the injection molding technique. This method consists of softhening the ceramic material by means of adding some plastic and heating in order to inject the mixture under pressure into a relatively cold mold where solidification takes place. Essentially, it is the same process used in thermoplastic industry but, in the present case, the ceramic powder load ranges between 80 to 90 wt.%. This work shows results obtained from the fabrication of pieces of different ceramic materials (alumina, barium titanate ferrites, etc.) in a small scale, using equipments developed and constructed in the laboratory. (Author) [es

Twins in Ancient Greece: a synopsis.

Science.gov (United States)

Malamitsi-Puchner, Ariadne

2016-01-01

This brief outline associates twins with several aspects of life in Ancient Greece. In Greek mythology twins caused ambivalent reactions and were believed to have ambivalent feelings for each other. Very often, they were viewed as the representatives of the dualistic nature of the universe. Heteropaternal superfecundation, which dominates in ancient myths, explains on one hand, the god-like qualities and, on the other hand, the mortal nature of many twins. An assumption is presented that legends referring to twins might reflect the territorial expansions of Ancient Greeks in Northern Mediterranean, around the Black Sea, in Asia Minor, as well as North East Africa. In conclusion, in Greek antiquity, twins have been used as transitional figures between myth and reality.

Ceramic Electron Multiplier

International Nuclear Information System (INIS)

Comby, G.

1996-01-01

The Ceramic Electron Multipliers (CEM) is a compact, robust, linear and fast multi-channel electron multiplier. The Multi Layer Ceramic Technique (MLCT) allows to build metallic dynodes inside a compact ceramic block. The activation of the metallic dynodes enhances their secondary electron emission (SEE). The CEM can be used in multi-channel photomultipliers, multi-channel light intensifiers, ion detection, spectroscopy, analysis of time of flight events, particle detection or Cherenkov imaging detectors. (auth)

Piezo-electrostrictive ceramics

International Nuclear Information System (INIS)

Kim, Ho Gi; Shin, Byeong Cheol

1991-09-01

This book deals with principle and the case of application of piezo-electrostrictive ceramics, which includes definition of piezoelectric materials and production and development of piezoelectric materials, coexistence of Pb(zr, Ti)O 3 ceramics on cause of coexistence in MPB PZT ceramics, electrostrictive effect of oxide type perovskite, practical piezo-electrostrictive materials, and breaking strength, evaluation technique of piezoelectric characteristic, and piezoelectric accelerometer sensor like printer head, ink jet and piezoelectric relay.

Ceramic Surface Treatment with a Single-component Primer: Resin Adhesion to Glass Ceramics.

Science.gov (United States)

Prado, Mayara; Prochnow, Catina; Marchionatti, Ana Maria Estivalete; Baldissara, Paolo; Valandro, Luiz Felipe; Wandscher, Vinicius Felipe

2018-04-19

To evaluate the microshear bond strength (μSBS) of composite cement bonded to two machined glass ceramics and its durability, comparing conventional surface conditioning (hydrofluoric acid + silane) to a one-step primer (Monobond Etch & Prime). Machined slices of lithium disilicate ceramic (LDC) (IPS e.max CAD) and feldspathic ceramic (FC) (VITA Mark II) glass ceramics were divided into two groups (n = 10) according to two factors: 1. surface treatment: HF+S (ca 5% hydrofluoric acid [IPS Ceramic Etching GEL] + silane coupling agent [SIL; Monobond Plus]) or MEP (single-component ceramic conditioner; Monobond Etch & Prime); 2. storage condition: baseline (without aging; tested 24 h after cementing) or aged (70 days of water storage + 12,000 thermal cycles). Composite cement (Multilink Automix, Ivoclar Vivadent) was applied to starch matrices on the treated ceramic surfaces and photoactivated. A μSBS test was performed (0.5 mm/min) and the failure pattern was determined. Contact angle and micromorphological analyses were also performed. Data were analyzed with Student's t-test (α = 5%). For both ceramic materials, HF+S resulted in higher mean μSBS (MPa) at baseline (LDC: HF+S 21.2 ± 2.2 > MEP 10.4 ± 2.4; FC: HF+S 19.6 ± 4.3 > MEP 13.5 ± 5.4) and after aging (LDC: HF+S 14.64 ± 2.31 > MEP 9 ± 3.4; FC HF+S: 14.73 ± 3.33 > MEP 11.1 ± 3.3). HF+S resulted in a statistically significant decrease in mean μSBS after aging (p = 0.0001), while MEP yielded no significant reduction. The main failure type was adhesive between composite cement and ceramic. HF+S resuted in the lowest contact angle. Hydrofluoric acid + silane resulted in higher mean μSBS than Monobond Etch & Prime for both ceramics; however, Monobond Etch & Prime had stable bonding after aging.

The Ancient Kemetic Roots of Library and Information Science.

Science.gov (United States)

Zulu, Itibari M.

This paper argues that the ancient people of Kemet (Egypt), "the black land," built and operated the first major libraries and institutions of higher education in the world. Topics of discussion include the Ancient Egyptians as an African people; a chronology of Ancient Kemet; literature in Kemet; a history of Egyptian Librarianship; the…

Early Pottery Making in Northern Coastal Peru. Part II: Field Firing Experiments

International Nuclear Information System (INIS)

Shimada, I.; Goldstein, D.; Sosa, J.; Wagner, U.

2003-01-01

We present data from three seasons of experimental field work designed to recreate ancient Andean coastal ceramic firing techniques. Based on the recent discovery of two different archaeological ceramic production sites in the La Leche river valley of northern coastal Peru, the opportunity arose to apply Moessbauer spectroscopy and other analytical methods to reconstruct ancient firing procedures. Two sets of firings took place in 1993 and 1997 in Batan Grande using a partially restored Formative kiln from about 800 BC, local hardwood and cow dung as fuel. A third experiment followed in 2000 after the discovery of a Middle Sican ceramics workshop in use between ca. AD 950 and 1050 at Huaca Sialupe, where an exact replica of an ancient kiln was built from local clay, and fired with local wood and cow dung. Additionally, inverted urns found at Huaca Sialupe were tested for their potential use as furnaces for metal working. Moessbauer spectroscopy was used to compare the physical and chemical state of specimens produced in the field experiments with ancient ceramics and with specimens produced in controlled laboratory experiments.

A fractographic study of clinically retrieved zirconia–ceramic and metal–ceramic fixed dental prostheses

OpenAIRE

Pang, Zhen; Chughtai, Asima; Sailer, Irena; Zhang, Yu

2015-01-01

A recent 3-year randomized controlled trial (RCT) of tooth supported three- to five-unit zirconia-ceramic and metal-ceramic posterior fixed dental prostheses (FDPs) revealed that veneer chipping and fracture in zirconia-ceramic systems occurred more frequently than those in metal-ceramic systems [1]. This study seeks to elucidate the underlying mechanisms responsible for the fracture phenomena observed in this RCT using a descriptive fractographic analysis

Ceramic and non-ceramic hydroxyapatite as a bone graft material: a brief review.

Science.gov (United States)

Dutta, S R; Passi, D; Singh, P; Bhuibhar, A

2015-03-01

Treatment of dental, craniofacial and orthopedic defects with bone graft substitutes has shown promising result achieving almost complete bone regeneration depending on product resorption similar to human bone's physicochemical and crystallographic characteristics. Among these, non-ceramic and ceramic hydroxyapatite being the main inorganic salt of bone is the most studied calcium phosphate material in clinical practices ever since 1970s and non-ceramic since 1985. Its "chemical similarity" with the mineralized phase of biologic bone makes it unique. Hydroxyapatite as an excellent carrier of osteoinductive growth factors and osteogenic cell populations is also useful as drug delivery vehicle regardless of its density. Porous ceramic and non-ceramic hydroxyapatite is osteoconductive, biocompatible and very inert. The need for bone graft material keeps on increasing with increased age of the population and the increased conditions of trauma. Recent advances in genetic engineering and doping techniques have made it possible to use non-ceramic hydroxyapatite in larger non-ceramic crystals and cluster forms as a successful bone graft substitute to treat various types of bone defects. In this paper we have mentioned some recently studied properties of hydroxyapatite and its various uses through a brief review of the literatures available to date.

Mounting for ceramic scroll

Science.gov (United States)

Petty, Jack D.

1993-01-01

A mounting for a ceramic scroll on a metal engine block of a gas turbine engine includes a first ceramic ring and a pair of cross key connections between the first ceramic ring, the ceramic scroll, and the engine block. The cross key connections support the scroll on the engine block independent of relative radial thermal growth and for bodily movement toward an annular mounting shoulder on the engine. The scroll has an uninterrupted annular shoulder facing the mounting shoulder on the engine block. A second ceramic ring is captured between mounting shoulder and the uninterrupted shoulder on the scroll when the latter is bodily shifted toward the mouting shoulder to define a gas seal between the scroll and the engine block.

Properties and Clinical Application of Three Types of Dental Glass-Ceramics and Ceramics for CAD-CAM Technologies

Science.gov (United States)

Ritzberger, Christian; Apel, Elke; Höland, Wolfram; Peschke, Arnd; Rheinberger, Volker M.

2010-01-01

The main properties (mechanical, thermal and chemical) and clinical application for dental restoration are demonstrated for three types of glass-ceramics and sintered polycrystalline ceramic produced by Ivoclar Vivadent AG. Two types of glass-ceramics are derived from the leucite-type and the lithium disilicate-type. The third type of dental materials represents a ZrO2 ceramic. CAD/CAM technology is a procedure to manufacture dental ceramic restoration. Leucite-type glass-ceramics demonstrate high translucency, preferable optical/mechanical properties and an application as dental inlays, onlays and crowns. Based on an improvement of the mechanical parameters, specially the strength and toughness, the lithium disilicate glass-ceramics are used as crowns; applying a procedure to machine an intermediate product and producing the final glass-ceramic by an additional heat treatment. Small dental bridges of lithium disilicate glass-ceramic were fabricated using a molding technology. ZrO2 ceramics show high toughness and strength and were veneered with fluoroapatite glass-ceramic. Machining is possible with a porous intermediate product.

Ancient and modern women in the "Woman's World".

Science.gov (United States)

Hurst, Isobel

2009-01-01

Under the editorship of Oscar Wilde, the "Woman's World" exemplified the popular dissemination of Hellenism through periodical culture. Addressing topics such as marriage, politics, and education in relation to the lives of women in the ancient world, the magazine offered an unfamiliar version of the reception of ancient Greece and Rome in late-Victorian aestheticism, one that was accessible to a wide readership because it was often based on images rather than texts. The classical scholar Jane Ellen Harrison addressed herself to this audience of women readers, discussing the similarities between modern collegiate life and the "woman's world" that enabled Sappho to flourish in ancient Greece. The "Woman's World" thus questions gender stereotypes by juxtaposing ancient and modern women, implicitly endorsing varied models of womanhood.

Defining Astrology in Ancient and Classical History

Science.gov (United States)

Campion, Nicholas

2015-05-01

Astrology in the ancient and classical worlds can be partly defined by its role, and partly by the way in which scholars spoke about it. The problem is complicated by the fact that the word is Greek - it has no Babylonian or Egyptian cognates - and even in Greece it was interchangeable with its cousin, 'astronomy'. Yet if we are to understand the role of the sky, stars and planets in culture, debates about the nature of ancient astrology, by both classical and modern scholars, must be taken into account. This talk will consider modern scholars' typologies of ancient astrology, together with ancient debates from Cicero in the 1st century BC, to Plotinus (204/5-270 AD) and Isidore of Seville (c. 560 - 4 April 636). It will consider the implications for our understanding of astronomy's role in culture, and conclude that in the classical period astrology may be best understood through its diversity and allegiance to competing philosophies, and that its functions were therefore similarly varied.

Ceramic combustor mounting

Science.gov (United States)

Hoffman, Melvin G.; Janneck, Frank W.

1982-01-01

A combustor for a gas turbine engine includes a metal engine block including a wall portion defining a housing for a combustor having ceramic liner components. A ceramic outlet duct is supported by a compliant seal on the metal block and a reaction chamber liner is stacked thereon and partly closed at one end by a ceramic bypass swirl plate which is spring loaded by a plurality of circumferentially spaced, spring loaded guide rods and wherein each of the guide rods has one end thereof directed exteriorly of a metal cover plate on the engine block to react against externally located biasing springs cooled by ambient air and wherein the rod spring support arrangement maintains the stacked ceramic components together so that a normal force is maintained on the seal between the outlet duct and the engine block under all operating conditions. The support arrangement also is operative to accommodate a substantial difference in thermal expansion between the ceramic liner components of the combustor and the metal material of the engine block.

Diffusion in ceramics

CERN Document Server

Pelleg, Joshua

2016-01-01

This textbook provides an introduction to changes that occur in solids such as ceramics, mainly at high temperatures, which are diffusion controlled, as well as presenting research data. Such changes are related to the kinetics of various reactions such as precipitation, oxidation and phase transformations, but are also related to some mechanical changes, such as creep. The book is composed of two parts, beginning with a look at the basics of diffusion according to Fick's Laws. Solutions of Fick’s second law for constant D, diffusion in grain boundaries and dislocations are presented along with a look at the atomistic approach for the random motion of atoms. In the second part, the author discusses diffusion in several technologically important ceramics. The ceramics selected are monolithic single phase ones, including: A12O3, SiC, MgO, ZrO2 and Si3N4. Of these, three refer to oxide ceramics (alumina, magnesia and zirconia). Carbide based ceramics are represented by the technologically very important Si-ca...

The fingerprint element analysis on provenance of ancient chinese Jun porcelain

International Nuclear Information System (INIS)

Gao Zhengyao; Chen Songhua; Wang Jie; Huang Zhongxiang; Jia Xiuqin; Han Song

1997-01-01

Forty-three samples of ancient Jun porcelains and so on were chosen. Neutron activation analysis (NAA) was used to measure the 36 trace elements in every sample. Seven elements were chosen as the 'fingerprint elements'. The provenance of the glazes and bodies of ancient Chinese Jun porcelain were investigated by the fingerprint element analysis method. The result shows that although the ancient Chinese Jun porcelain samples have been leapt over six hundred years, and glaze colors are utterly different and are from many different kilns, there are long term, stable and same mainly raw material source. The near provenance relation between ancient Jun porcelain and ancient Ru porcelain is preliminarily analyzed. A few modern Jun porcelains approximate from ancient Jun porcelains, the majority become estranged from ancient Jun porcelain

Randomized clinical trial of implant-supported ceramic-ceramic and metal-ceramic fixed dental prostheses: preliminary results.

Science.gov (United States)

Esquivel-Upshaw, Josephine F; Clark, Arthur E; Shuster, Jonathan J; Anusavice, Kenneth J

2014-02-01

The aim of this study was to determine the survival rates over time of implant-supported ceramic-ceramic and metal-ceramic prostheses as a function of core-veneer thickness ratio, gingival connector embrasure design, and connector height. An IRB-approved, randomized, controlled clinical trial was conducted as a single-blind pilot study involving 55 patients missing three teeth in either one or two posterior areas. These patients (34 women; 21 men; age range 52-75 years) were recruited for the study to receive a three-unit implant-supported fixed dental prosthesis (FDP). Two implants were placed for each of the 72 FDPs in the study. The implants (Osseospeed, Astra Tech), which were made of titanium, were grit blasted. A gold-shaded, custom-milled titanium abutment (Atlantis, Astra Tech), was secured to each implant body. Each of the 72 FDPs in 55 patients were randomly assigned based on one of the following options: (1) A. ceramic-ceramic (Yttria-stabilized zirconia core, pressable fluorapatite glass-ceramic, IPS e.max ZirCAD, and ZirPress, Ivoclar Vivadent) B. metal-ceramic (palladium-based noble alloy, Capricorn, Ivoclar Vivadent, with press-on leucite-reinforced glass-ceramic veneer, IPS InLine POM, Ivoclar Vivadent); (2) occlusal veneer thickness (0.5, 1.0, and 1.5 mm); (3) curvature of gingival embrasure (0.25, 0.5, and 0.75 mm diameter); and (4) connector height (3, 4, and 5 mm). FDPs were fabricated and cemented with dual-cure resin cement (RelyX, Universal Cement, 3M ESPE). Patients were recalled at 6 months, 1 year, and 2 years. FDPs were examined for cracks, fracture, and general surface quality. Recall exams of 72 prostheses revealed 10 chipping fractures. No fractures occurred within the connector or embrasure areas. Two-sided Fisher's exact tests showed no significant correlation between fractures and type of material system (p = 0.51), veneer thickness (p = 0.75), radius of curvature of gingival embrasure (p = 0.68), and connector height (p = 0

Corrosion of Ceramic Materials

Science.gov (United States)

Opila, Elizabeth J.; Jacobson, Nathan S.

1999-01-01

Non-oxide ceramics are promising materials for a range of high temperature applications. Selected current and future applications are listed. In all such applications, the ceramics are exposed to high temperature gases. Therefore it is critical to understand the response of these materials to their environment. The variables to be considered here include both the type of ceramic and the environment to which it is exposed. Non-oxide ceramics include borides, nitrides, and carbides. Most high temperature corrosion environments contain oxygen and hence the emphasis of this chapter will be on oxidation processes.

Ceramic Seal.

Energy Technology Data Exchange (ETDEWEB)

Smartt, Heidi A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Romero, Juan A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Custer, Joyce Olsen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hymel, Ross W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Krementz, Dan [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Gobin, Derek [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Harpring, Larry [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Martinez-Rodriguez, Michael [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Varble, Don [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); DiMaio, Jeff [Tetramer Technologies, Pendleton, SC (United States); Hudson, Stephen [Tetramer Technologies, Pendleton, SC (United States)

2016-11-01

Containment/Surveillance (C/S) measures are critical to any verification regime in order to maintain Continuity of Knowledge (CoK). The Ceramic Seal project is research into the next generation technologies to advance C/S, in particular improving security and efficiency. The Ceramic Seal is a small form factor loop seal with improved tamper-indication including a frangible seal body, tamper planes, external coatings, and electronic monitoring of the seal body integrity. It improves efficiency through a self-securing wire and in-situ verification with a handheld reader. Sandia National Laboratories (SNL) and Savannah River National Laboratory (SRNL), under sponsorship from the U.S. National Nuclear Security Administration (NNSA) Office of Defense Nuclear Nonproliferation Research and Development (DNN R&D), have previously designed and have now fabricated and tested Ceramic Seals. Tests have occurred at both SNL and SRNL, with different types of tests occurring at each facility. This interim report will describe the Ceramic Seal prototype, the design and development of a handheld standalone reader and an interface to a data acquisition system, fabrication of the seals, and results of initial testing.

Ceramic Seal

International Nuclear Information System (INIS)

Smartt, Heidi A.; Romero, Juan A.; Custer, Joyce Olsen; Hymel, Ross W.; Krementz, Dan; Gobin, Derek; Harpring, Larry; Martinez-Rodriguez, Michael; Varble, Don; DiMaio, Jeff; Hudson, Stephen

2016-01-01

Containment/Surveillance (C/S) measures are critical to any verification regime in order to maintain Continuity of Knowledge (CoK). The Ceramic Seal project is research into the next generation technologies to advance C/S, in particular improving security and efficiency. The Ceramic Seal is a small form factor loop seal with improved tamper-indication including a frangible seal body, tamper planes, external coatings, and electronic monitoring of the seal body integrity. It improves efficiency through a self-securing wire and in-situ verification with a handheld reader. Sandia National Laboratories (SNL) and Savannah River National Laboratory (SRNL), under sponsorship from the U.S. National Nuclear Security Administration (NNSA) Office of Defense Nuclear Nonproliferation Research and Development (DNN R&D), have previously designed and have now fabricated and tested Ceramic Seals. Tests have occurred at both SNL and SRNL, with different types of tests occurring at each facility. This interim report will describe the Ceramic Seal prototype, the design and development of a handheld standalone reader and an interface to a data acquisition system, fabrication of the seals, and results of initial testing.

Legacy of the Ancient World: An Educational Guide. Understanding Ancient Culture through Art at the Tampa Museum of Art.

Science.gov (United States)

Whitelaw, R. Lynn

Among the many contributions made by Ancient Greeks and Romans to contemporary life, are those which influence art, architecture, literature, philosophy, mathematics and science, theater, athletics, religion, and the founding of democracy. The Tampa Museum of Art's classical collection offers a unique opportunity to learn about Ancient Greeks and…

GENERATION OF GEOMETRIC ORNAMENTS IN ANCIENT MOSAIC ART

Directory of Open Access Journals (Sweden)

SASS Ludmila

2015-06-01

Full Text Available The paper examines geometrical ornaments from ancient mosaic.We studied the geometric generation by using Computer Aided Graphics for three examples of ancient mosaic: a mosaic of Ancient Corinth, a mosaic of the sacred geometry Flower of Life (exposed in the National Museum of Israel and a mosaic of fortress Masada - Israel. The technique of drawing ancient mosaic is recomposed using computer aided graphics. A program has been developed that can help draw a petal-type arc (semicircle of the mosaic that is the Byzantine church of Masada. Based on these mosaics, other variants of aesthetic images in monochrome or black and white and polychrome were drawn, all of which can be materialized in decorative art to embellish various surfaces: walls, floors, pools, fountains, etc.

Mid-term results of the BIOLOX delta ceramic-on-ceramic total hip arthroplasty.

Science.gov (United States)

Lee, Y K; Ha, Y C; Yoo, J-I; Jo, W L; Kim, K-C; Koo, K H

2017-06-01

We conducted a prospective study of a delta ceramic total hip arthroplasty (THA) to determine the rate of ceramic fracture, to characterise post-operative noise, and to evaluate the mid-term results and survivorship. Between March 2009 and March 2011, 274 patients (310 hips) underwent cementless THA using a delta ceramic femoral head and liner. At each follow-up, clinical and radiological outcomes were recorded. A Kaplan-Meier analysis was undertaken to estimate survival. Four patients (four hips) died and 18 patients (20 hips) were lost to follow-up within five years. The remaining 252 patients (286 hips) were followed for a mean of 66.5 months (60 to 84). There were 144 men (166 hips) and 108 women (120 hips) with a mean age of 49.7 years (16 to 83) at surgery. The mean pre-operative Harris Hip Score of 47.1 points improved to 93.8 points at final follow-up. Six patients reported squeaking in seven hips; however, none were audible. Radiolucent lines involving Gruen zones one and/or seven were seen in 52 hips (18.2%). No hip had detectable wear, focal osteolysis or signs of loosening. One hip was revised because of fracture of the ceramic liner, which occurred due to an undetected malseating of the ceramic liner at the time of surgery. One hip was revised for a periprosthetic fracture of the femur, and one hip was treated for periprosthetic joint infection. The six-year survivorship with re-operation for any reason as the endpoint was 99.0% (95% confidence interval 97.8% to 100%). The rate of delta ceramic fracture was 0.3% (one of 286). While ceramic head fracture was dominant in previous ceramic-on-ceramic THA, fracture of the delta ceramic liner due to malseating is a concern. Cite this article: Bone Joint J 2017;99-B:741-8. ©2017 The British Editorial Society of Bone & Joint Surgery.

Advantages and disadvantages of ceramic on ceramic total hip arthroplasty: a review.

Science.gov (United States)

Gallo, Jiri; Goodman, Stuart Barry; Lostak, Jiri; Janout, Martin

2012-09-01

Ceramic on ceramic (COC) total hip arthroplasty (THA) was developed to reduce wear debris and accordingly, the occurrence of osteolysis and aseptic loosening especially in younger patients. Based on the excellent tribological behavior of current COC bearings and the relatively low biological activity of ceramic particles, significant improvement in survivorship of these implants is expected. We used manual search to identify all relevant studies reporting clinical data on COC THAs in PubMed. The objective was to determine whether current COC THA offers a better clinical outcome and survivorship than non-COC THA. Studies with early generation ceramic bearings yielded 68% to 84% mean survivorship at 20 years follow-up which is comparable with the survivorship of non-COC THAs. Studies on current ceramic bearings report a 10-year revision-free interval of 92% to 99%. These outcomes are comparable to the survivorship of the best non-COC THAs. However, there are still concerns regarding fracture of sandwich ceramic liners, squeaking, and impingement of the femoral neck on the rim of the ceramic liner leading to chipping, especially in younger and physically active patients. Current COC THA leads to equivalent but not improved survivorship at 10 years follow-up in comparison to the best non-COC THA. Based on this review, we recommend that surgeons weigh the potential advantages and disadvantages of current COC THA in comparison to other bearing surfaces when considering young very active patients who are candidates for THA.

Factors affecting the shear bond strength of metal and ceramic brackets bonded to different ceramic surfaces.

Science.gov (United States)

Abu Alhaija, Elham S J; Abu AlReesh, Issam A; AlWahadni, Ahed M S

2010-06-01

The aims of this study were to evaluate the shear bond strength (SBS) of metal and ceramic brackets bonded to two different all-ceramic crowns, IPS Empress 2 and In-Ceram Alumina, to compare the SBS between hydrofluoric acid (HFA), phosphoric acid etched, and sandblasted, non-etched all-ceramic surfaces. Ninety-six all-ceramic crowns were fabricated resembling a maxillary left first premolar. The crowns were divided into eight groups: (1) metal brackets bonded to sandblasted 9.6 per cent HFA-etched IPS Empress 2 crowns; (2) metal brackets bonded to sandblasted 9.6 per cent HFA-etched In-Ceram crowns; (3) ceramic brackets bonded to sandblasted 9.6 per cent HFA-etched IPS Empress 2 crowns; (4) ceramic brackets bonded to sandblasted 9.6 per cent HFA-etched In-Ceram crowns; (5) metal brackets bonded to sandblasted 37 per cent phosphoric acid-etched IPS Empress 2 crowns; (6) metal brackets bonded to sandblasted 37 per cent phosphoric acid-etched In-Ceram crowns; (7) metal brackets bonded to sandblasted, non-etched IPS Empress 2 crowns; and (8) metal brackets bonded to sandblasted, non-etched In-Ceram crowns. Metal and ceramic orthodontic brackets were bonded using a conventional light polymerizing adhesive resin. An Instron universal testing machine was used to determine the SBS at a crosshead speed of 0.1 mm/minute. Comparison between groups was performed using a univariate general linear model and chi-squared tests. The highest mean SBS was found in group 3 (120.15 +/- 45.05 N) and the lowest in group 8 (57.86 +/- 26.20 N). Of all the variables studied, surface treatment was the only factor that significantly affected SBS (P Empress 2 and In-Ceram groups.

Ceramic transactions: Environmental and waste management issues in the ceramic industry. Volume 39

International Nuclear Information System (INIS)

Mellinger, G.B.

1994-01-01

A symposium on environmental and waste management issues in the ceramic industry took place in Cincinnati, Ohio, April 19-22, 1993. The symposium was held in conjunction with the 95th Annual Meeting of the American Ceramic Society and was sponsored by the Ceramic Manufacturing Council, Legislative and Regulatory Affairs Committee with the Glass and Optical Materials, Basic Science, Cements, Nuclear, Refractory Ceramics, Structural Clay Products, Whitewares, Design, Electronics, Engineering Ceramics, and Materials and Equipment Divisions. This volume documents several of the papers that were presented at the symposium. Papers presented in this volume are categorized under the following headings: vitrification of hazardous and mixed wastes; waste glass properties and microstructure; processing of nuclear waste disposal glasses; waste form qualification; glass dissolution: modeling and mechanisms; systems and field testing of waste forms

Analyses of fine paste ceramics

International Nuclear Information System (INIS)

Sabloff, J.A.

1980-01-01

Four chapters are included: history of Brookhaven fine paste ceramics project, chemical and mathematical procedures employed in Mayan fine paste ceramics project, and compositional and archaeological perspectives on the Mayan fine paste ceramics

LIF characterization of ancient umber ceramics and frescos; Applicazione della tecnica LIF alle antiche ceramiche umbre e agli affreschi

Energy Technology Data Exchange (ETDEWEB)

Fantoni, R.; Palucci, A.; Ribezzo, S. [ENEA, Centro Ricerche Frascati, Rome (Italy). Dipt. Innovazione; Borgia, I. [Perugia Univ., Perugia (Italy)

1999-07-01

The report shows the result carried out by the LIF (layer induced fluorescence) system developed for pigment analysis at ENEA (National Agency for New Technology, Energy and the Environment) Frascati research centre (Rome) . The frescos and ceramics by Umbria region (Italy) are analysed. [Italian] Vengono riportati i risultati ottenuti dall'indagine della fluorescenza indotta da laser su antiche ceramiche umbre e su affreschi. La tecnica e' stata anche utilizzata per determinare la fluorescenza dei pigmenti contenuti in campioni di affresco.

Analyses of fine paste ceramics

Energy Technology Data Exchange (ETDEWEB)

Sabloff, J A [ed.

1980-01-01

Four chapters are included: history of Brookhaven fine paste ceramics project, chemical and mathematical procedures employed in Mayan fine paste ceramics project, and compositional and archaeological perspectives on the Mayan fine paste ceramics. (DLC)

Genetic diversity among ancient Nordic populations

DEFF Research Database (Denmark)

Melchior, Linea Cecilie; Lynnerup, Niels; Siegismund, Hans Redlef

2010-01-01

, the success rate varied substantially between sites; the highest rates were obtained with untouched, freshly excavated material, whereas heavy handling, archeological preservation and storage for many years influenced the ability to obtain authentic endogenic DNA. While the nucleotide diversity at two...... the ancient Danes (average 13%) than among extant Danes and Scandinavians ( approximately 2.5%) as well as among other ancient population samples reported. Haplogroup I could therefore have been an ancient Southern Scandinavian type "diluted" by later immigration events. Interestingly, the two Neolithic...... samples (4,200 YBP, Bell Beaker culture) that were typed were haplogroup U4 and U5a, respectively, and the single Bronze Age sample (3,300-3,500 YBP) was haplogroup U4. These two haplogroups have been associated with the Mesolithic populations of Central and Northern Europe. Therefore, at least...

Damage and repair of ancient DNA

DEFF Research Database (Denmark)

Mitchell, David; Willerslev, Eske; Hansen, Anders

2005-01-01

degradation, these studies are limited to species that lived within the past 10(4)-10(5) years (Late Pleistocene), although DNA sequences from 10(6) years have been reported. Ancient DNA (aDNA) has been used to study phylogenetic relationships of protists, fungi, algae, plants, and higher eukaryotes...... such as extinct horses, cave bears, the marsupial wolf, the moa, and Neanderthal. In the past few years, this technology has been extended to the study of infectious disease in ancient Egyptian and South American mummies, the dietary habits of ancient animals, and agricultural practices and population dynamics......, and extensive degradation. In the course of this review, we will discuss the current aDNA literature describing the importance of aDNA studies as they relate to important biological questions and the difficulties associated with extracting useful information from highly degraded and damaged substrates derived...

Testing of Alignment Parameters for Ancient Samples: Evaluating and Optimizing Mapping Parameters for Ancient Samples Using the TAPAS Tool

Directory of Open Access Journals (Sweden)

Ulrike H. Taron

2018-03-01

Full Text Available High-throughput sequence data retrieved from ancient or other degraded samples has led to unprecedented insights into the evolutionary history of many species, but the analysis of such sequences also poses specific computational challenges. The most commonly used approach involves mapping sequence reads to a reference genome. However, this process becomes increasingly challenging with an elevated genetic distance between target and reference or with the presence of contaminant sequences with high sequence similarity to the target species. The evaluation and testing of mapping efficiency and stringency are thus paramount for the reliable identification and analysis of ancient sequences. In this paper, we present ‘TAPAS’, (Testing of Alignment Parameters for Ancient Samples, a computational tool that enables the systematic testing of mapping tools for ancient data by simulating sequence data reflecting the properties of an ancient dataset and performing test runs using the mapping software and parameter settings of interest. We showcase TAPAS by using it to assess and improve mapping strategy for a degraded sample from a banded linsang (Prionodon linsang, for which no closely related reference is currently available. This enables a 1.8-fold increase of the number of mapped reads without sacrificing mapping specificity. The increase of mapped reads effectively reduces the need for additional sequencing, thus making more economical use of time, resources, and sample material.

All-ceramic crowns: bonding or cementing?

Science.gov (United States)

Pospiech, Peter

2002-12-01

Despite the wide variety of all-ceramic systems available today, the majority of dental practitioners hesitate to recommend and insert all-ceramic crowns. This article regards the nature of the ceramic materials, the principles of bonding and adhesion, and the clinical problems of the acid-etch technique for crowns. Advantages and disadvantages are discussed, and the influences of different factors on the strength of all-ceramic crowns are presented. Finally, the conclusion is drawn that conventional cementing of all-ceramic crowns is possible when the specific properties of the ceramics are taken into consideration.

Ceramic breeder materials

International Nuclear Information System (INIS)

Johnson, C.E.

1990-01-01

The breeding blanket is a key component of the fusion reactor because it directly involves tritium breeding and energy extraction, both of which are critical to development of fusion power. The lithium ceramics continue to show promise as candidate breeder materials. This promise was recognized by the International Thermonuclear Reactor (ITER) design team in its selection of ceramics as the first option for the ITER breeder material. Blanket design studies have indicated properties in the candidate materials data base that need further investigation. Current studies are focusing on tritium release behavior at high burnup, changes in thermophysical properties with burnup, compatibility between the ceramic breeder and beryllium multiplier, and phase changes with burnup. Laboratory and in-reactor tests, some as part of an international collaboration for development of ceramic breeder materials, are underway. 32 refs., 1 fig., 1 tab

Moessbauer studies on ancient Jizhon plain Temmoku porcelains

International Nuclear Information System (INIS)

Yu Zhengfang; Zheng Yufang; Lin Yongqiang

1994-01-01

Three kinds of ancient Jizhou plain Temmoku wares and their several ware-making raw materials were studied by means of X-ray diffraction (XRD) and Moessbauer spectroscopy. The firing technique of ancient Jizhou Temmoku porcelains is discussed. (orig.)

Nano-ceramics and its molding technologies

International Nuclear Information System (INIS)

Liu Jian; Xu Yunshu

2007-01-01

Nano-ceramics and its related knowledge were introduced. Fabrication of nano-ceramic powder, as well as the molding and sintering technologies of nano-ceramics were reviewed. Features of the present molding technologies were analyzed. The applications of nano-ceramics were prospected. (authors)

Tracking down human contamination in ancient human teeth

DEFF Research Database (Denmark)

Sampietro, María Lourdes; Gilbert, M Thomas P; Lao, Oscar

2006-01-01

DNA sequences can be used to support data authenticity is misleading in scenarios where the presence of old contaminant sequences is possible. We argue therefore that the typing of those involved in the manipulation of the ancient human specimens is critical in order to ensure that generated results......DNA contamination arising from the manipulation of ancient calcified tissue samples is a poorly understood, yet fundamental, problem that affects the reliability of ancient DNA (aDNA) studies. We have typed the mitochondrial DNA hypervariable region I of the only 6 people involved in the excavation...

Sex trade, social and legal aspect of the phenomena and the Albanian criminal legislation provisions

Directory of Open Access Journals (Sweden)

Aurela Bozo

2015-01-01

Full Text Available The purpose of this paper is to analyse the effects of Article 113 of the Albanian Criminal Code on women. This article appears to be gender neutral, but it’s enforcement affects women disproportionately and face them with forms of indirect gender discrimination. Through monitoring of Tirana Judicial District Court’s decisions, with object article 113 of the ACC, “Prostitution”, for a four year period from 2010 through 2013 and interviews with women who have exercised prostitution, there are brought in attention the profiles of the individuals who exercise prostitution and also social aspects of this phenomena. The hypothesis raised in this paper is that the profile of an individual who exercises prostitution is a vulnerable woman, with low education, unemployed, with low income, who is faced with family and social problems. This paper analyses the relation between the social aspects and legal dynamics of article 113 of ACC. The changes of 2012 introduced in the article 113 of the ACC brought sanctions for persons who buy the service of prostitution reflecting the process of social changes and understanding of gender equality. The issue of the next steps to address this phenomenon is analysed in this article too.

Ion conductivity of nasicon ceramics

International Nuclear Information System (INIS)

Hoj, J.W.; Engell, J.

1989-01-01

The Nasicon ss ,Na 1 + X Zr 2 Si X P 3 - X O 12 o , X , 3, includes some of the best solid state sodium conductors known today. Compositions in the interval 1.6 , X , 2.6 show conductivities comparable to the best β double-prime-alumina ceramics. It is well known that the ion conductivity of β-alumina is strongly dependent on the texture of the ceramic. Here a similar behavior is reported for Nasicon ceramics. Ceramics of the bulk composition Na 2.94 Zr 1.49 Si 2.20 P 0.80 O 10.85 were prepared by a gel method. The final ceramics consist of Nasicon crystals with x = 2.14 and a glass phase. The grain size and texture of the ceramics were controlled by varying the thermal history of the gel based raw materials and the sintering conditions. The room temperature resistivity of the resulting ceramics varies from 3.65*10 3 ohm cm to 1.23*10 3 ohm cm. Using the temperature comparison method and estimates of the area of grain boundaries in the ceramics, the resistivity of the Nasicon phase is estimated to be 225 ohm cm at 25 degrees C. B 2 O 3 - or Al 2 O 3 -doping of the glass bearing Nasicon ceramic lower the room temperature resistivity by a factor 2 to 5. The dopants do not substitute into the Nasicon phase in substantial amounts

Detecting Ancient Tuberculosis

Directory of Open Access Journals (Sweden)

Angela M. Gernaey

1998-12-01

Full Text Available Some diseases have played a more significant role in human development than others. Here we describe the results of a trial to diagnose ancient tuberculosis using chemical methods. Palaeo-epidemiological studies of the disease are compromised, but it has become apparent that tuberculosis (TB is a 'population-density dependent' disease. From modern studies, it is also apparent that the prevalence of TB can be used as an indicator of the level of poverty within the studied population. Mid-shaft rib samples from articulated individuals recovered from the former Newcastle Infirmary Burial Ground (1753-1845 AD were examined for mycolic acids that are species-specific for Mycobacterium tuberculosis. The 24% of ribs positive for mycolic acids correlated with the documented 27% tuberculosis prevalence. Mycolic acid biomarkers have the potential to provide an accurate trace of the palaeo-epidemiology of tuberculosis in ancient populations, thereby providing an indication of the overall level of poverty - a useful adjunct for archaeology.

Science and Technology of Ceramics

Indian Academy of Sciences (India)

Home; Journals; Resonance – Journal of Science Education; Volume 5; Issue 2. Science and Technology of Ceramics - Advanced Ceramics: Structural Ceramics and Glasses. Sheela K Ramasesha. Series Article Volume 5 Issue 2 February 2000 pp 4-11 ...

Fingerprint elements scatter analysis on ancient chinese Ru porcelains samples

International Nuclear Information System (INIS)

Gao Zhengyao; Wang Jie; Chen Xiande

1997-01-01

Altogether 28 samples, mainly including glazes and bodies of ancient Chinese Ru porcelain, were analyzed by NAA technique and the contents of 36 elements were compared. The scatter analysis for nine fingerprint-elements indicates that almost all ancient Chinese Ru porcelain samples had nearly identical and long-term stable source of raw materials although they were fired in different kilns, at varying time and with distinct colors, and moreover, the source of raw materials for modern Ru porcelain seems to approach that for ancient one. The close provenance relation between ancient Jun porcelain and ancient Ru porcelain is also preliminarily verified. The glaze material of Jingdezhen white porcelain is totally different from all other samples. It shows that the former came from a separate source

Current Issues with Environmental Barrier Coatings for Ceramics and Ceramic Composites

Science.gov (United States)

Lee, Kang N.

2004-01-01

The environmental barrier coating (EBC) for SiC/SiC ceramic matrix composites and Si3N4 ceramics is an emerging field as the application of silicon-based ceramics in the gas turbine engine hot section is on the horizon, both for aero and industrial gas turbines. EBC is an enabling technology for silicon-based ceramics because these materials without an EBC cannot be used in combustion environments due to rapid surface recession. Significant progress in EBC development has been made during the last decade through various government-sponsored programs. Current EBCs are based on silicon, mullite (3Al2O3-2SiO2) and BSAS (barium strontium aluminum silicate with celsian structure). Volatility of BSAS, BSAS-silica chemical reaction, and low melting point of silicon limit temperature capability of current EBCs to about 1350 C for long-term applications. There is a need for higher temperature EBCs as the temperature capability of silicon-based ceramics continue to increase. Therefore, research is underway to develop EBCs with improved temperature capability compared to current EBCs. The current status and issues with the advanced EBC development efforts will be discussed.

Positron annihilation in transparent ceramics

Science.gov (United States)

Husband, P.; Bartošová, I.; Slugeň, V.; Selim, F. A.

2016-01-01

Transparent ceramics are emerging as excellent candidates for many photonic applications including laser, scintillation and illumination. However achieving perfect transparency is essential in these applications and requires high technology processing and complete understanding for the ceramic microstructure and its effect on the optical properties. Positron annihilation spectroscopy (PAS) is the perfect tool to study porosity and defects. It has been applied to investigate many ceramic structures; and transparent ceramics field may be greatly advanced by applying PAS. In this work positron lifetime (PLT) measurements were carried out in parallel with optical studies on yttrium aluminum garnet transparent ceramics in order to gain an understanding for their structure at the atomic level and its effect on the transparency and light scattering. The study confirmed that PAS can provide useful information on their microstructure and guide the technology of manufacturing and advancing transparent ceramics.

Positron annihilation in transparent ceramics

International Nuclear Information System (INIS)

Husband, P; Selim, F A; Bartošová, I; Slugeň, V

2016-01-01

Transparent ceramics are emerging as excellent candidates for many photonic applications including laser, scintillation and illumination. However achieving perfect transparency is essential in these applications and requires high technology processing and complete understanding for the ceramic microstructure and its effect on the optical properties. Positron annihilation spectroscopy (PAS) is the perfect tool to study porosity and defects. It has been applied to investigate many ceramic structures; and transparent ceramics field may be greatly advanced by applying PAS. In this work positron lifetime (PLT) measurements were carried out in parallel with optical studies on yttrium aluminum garnet transparent ceramics in order to gain an understanding for their structure at the atomic level and its effect on the transparency and light scattering. The study confirmed that PAS can provide useful information on their microstructure and guide the technology of manufacturing and advancing transparent ceramics. (paper)

Deciphering Equine Evolution and Spatial Ancestry with Ancient Data

DEFF Research Database (Denmark)

Jónsson, Hákon

High-throughput sequencing has opened ancient DNA research to genomics, revolutionizing the amount of genetic information retrievable from archaeological and paleontological remains. Paleogenomics is still in infancy and requires substantial improvements in computational methods tailored to the s......High-throughput sequencing has opened ancient DNA research to genomics, revolutionizing the amount of genetic information retrievable from archaeological and paleontological remains. Paleogenomics is still in infancy and requires substantial improvements in computational methods tailored...... in the analysis of environmental bacterial sequences, which generally dominate ancient DNA extracts, and in the first pipeline completely devoted to the computational analysis of raw ancient DNA sequences. We then develop a spatially explicit method for determining which extant populations show the greatest...... genetic anity to ancient individuals, which often represents the key question in human paleogenomic projects. We applied the computational infrastructure developed to complete the genomic characterization of extant members of the genus Equus, which is composed of horses, asses and zebras. We sequenced...

Dreams in ancient Greek Medicine.

Science.gov (United States)

Laios, K; Moschos, M M; Koukaki, E; Vasilopoulos, E; Karamanou, M; Kontaxaki, M-I; Androutsos, G

2016-01-01

Dreams preoccupied the Greek and Roman world in antiquity, therefore they had a prominent role in social, philosophical, religious, historical and political life of those times. They were considered as omens and prophetic signs of future events in private and public life, and that was particularly accentuated when elements of actions which took place in the plot of dreams were associated directly or indirectly with real events. This is why it was important to use them in divination, and helped the growth of superstition and folklore believes. Medicine as a science and an anthropocentric art, could not ignore the importance of dreams, having in mind their popularity in antiquity. In ancient Greek medicine dreams can be divided into two basic categories. In the first one -which is related to religious medicine-dreams experienced by religionists are classified, when resorted to great religious sanctuaries such as those of Asclepius (Asclepieia) and Amphiaraos (Amfiaraeia). These dreams were the essential element for healing in this form of religious medicine, because after pilgrims underwent purifications they went to sleep in a special dwelling of the sanctuaries called "enkoimeterion" (Greek: the place to sleep) so that the healing god would come to their dreams either to cure them or to suggest treatment. In ancient Greek literature there are many reports of these experiences, but if there may be phenomena of self-suggestion, or they could be characterized as propaganda messages from the priesthood of each sanctuary for advertising purposes. The other category concerns the references about dreams found in ancient Greek medical literature, where one can find the attempts of ancient Greek physicians to interpret these dreams in a rational way as sings either of a corporal disease or of psychological distress. This second category will be the object of our study. Despite the different ways followed by each ancient Greek physician in order to explain dreams, their

Defect production in ceramics

Energy Technology Data Exchange (ETDEWEB)

Zinkle, S.J. [Oak Ridge National Lab., TN (United States); Kinoshita, C. [Kyushu Univ. (Japan)

1997-08-01

A review is given of several important defect production and accumulation parameters for irradiated ceramics. Materials covered in this review include alumina, magnesia, spinel silicon carbide, silicon nitride, aluminum nitride and diamond. Whereas threshold displacement energies for many ceramics are known within a reasonable level of uncertainty (with notable exceptions being AIN and Si{sub 3}N{sub 4}), relatively little information exists on the equally important parameters of surviving defect fraction (defect production efficiency) and point defect migration energies for most ceramics. Very little fundamental displacement damage information is available for nitride ceramics. The role of subthreshold irradiation on defect migration and microstructural evolution is also briefly discussed.

Ancient DNA and Forensics Mutual Benefits a Practical Sampling and Laboratory Guide Through a Virtual Ancient DNA Study

Directory of Open Access Journals (Sweden)

Jan Cemper-Kiesslich

2014-09-01

In this review the authors give a general overview on the field of ancient DNA analysis focussing of the potentials and limits, fields of application, requirements for samples, laboratory setup, reaction design and equipment as well as a brief outlook on current developments, future perspectives and potential cross links with associated scientific disciplines. Key words: Human DNA, Ancient DNA, Forensic DNA typing, Molecular archaeology, Application.

CHANT (CHinese ANcient Texts): a comprehensive database of all ancient Chinese texts up to 600 AD

OpenAIRE

Ho, Che Wah

2006-01-01

The CHinese ANcient Texts (CHANT) database is a long-term project which began in 1988 to build up a comprehensive database of all ancient Chinese texts up to the sixth century AD. The project is near completion and the entire database, which includes both traditional and excavated materials, will be released on the CHANT Web site (www.chant.org) in mid-2002. With more than a decade of experience in establishing an electronic Chinese literary database, we have gained much insight useful to the...

Influence of ceramic surface texture on the wear of gold alloy and heat-pressed ceramics.

Science.gov (United States)

Saiki, Osamu; Koizumi, Hiroyasu; Nogawa, Hiroshi; Hiraba, Haruto; Akazawa, Nobutaka; Matsumura, Hideo

2014-01-01

The purpose of this study was to evaluate the influence of ceramic surface texture on the wear of rounded rod specimens. Plate specimens were fabricated from zirconia (ZrO2), feldspathic porcelain, and lithium disilicate glass ceramics (LDG ceramics). Plate surfaces were either ground or polished. Rounded rod specimens with a 2.0-mm-diameter were fabricated from type 4 gold alloy and heat-pressed ceramics (HP ceramics). Wear testing was performed by means of a wear testing apparatus under 5,000 reciprocal strokes of the rod specimen with 5.9 N vertical loading. The results were statistically analyzed with a non-parametric procedure. The gold alloy showed the maximal height loss (90.0 µm) when the rod specimen was abraded with ground porcelain, whereas the HP ceramics exhibited maximal height loss (49.8 µm) when the rod specimen was abraded with ground zirconia. There was a strong correlation between height loss of the rod and surface roughness of the underlying plates, for both the gold alloy and HP ceramics.

Interfacial characterization of ceramic core materials with veneering porcelain for all-ceramic bi-layered restorative systems.

Science.gov (United States)

Tagmatarchis, Alexander; Tripodakis, Aris-Petros; Filippatos, Gerasimos; Zinelis, Spiros; Eliades, George

2014-01-01

The aim of the study was to characterize the elemental distribution at the interface between all-ceramic core and veneering porcelain materials. Three groups of all-ceramic cores were selected: A) Glass-ceramics (Cergo, IPS Empress, IPS Empress 2, e-max Press, Finesse); B) Glass-infiltrated ceramics (Celay Alumina, Celay Zirconia) and C) Densely sintered ceramics (Cercon, Procera Alumina, ZirCAD, Noritake Zirconia). The cores were combined with compatible veneering porcelains and three flat square test specimens were produced for each system. The core-veneer interfaces were examined by scanning electron microscopy and energy dispersive x-ray microanalysis. The glass-ceramic systems showed interfacial zones reach in Si and O, with the presence of K, Ca, Al in core and Ca, Ce, Na, Mg or Al in veneer material, depending on the system tested. IPS Empress and IPS Empress 2 demonstrated distinct transitional phases at the core-veneer interface. In the glassinfiltrated systems, intermixing of core (Ce, La) with veneer (Na, Si) elements occurred, whereas an abrupt drop of the core-veneer elemental concentration was documented at the interfaces of all densely sintered ceramics. The results of the study provided no evidence of elemental interdiffusion at the core-veneer interfaces in densely sintered ceramics, which implies lack of primary chemical bonding. For the glass-containing systems (glassceramics and glass-infiltrated ceramics) interdiffusion of the glass-phase seems to play a critical role in establishing a primary bonding condition between ceramic core and veneering porcelain.

Characterization and evaluation of ceramic properties of clay used in structural ceramics

International Nuclear Information System (INIS)

Savazzini-Reis, A.; Della-Sagrillo, V.P.; Valenzuela-Diaz, F.R.

2016-01-01

The Brazilian red ceramic industry monthly consumes about 10.3 million tons of clay, its main raw material. In most potteries, characterization of the clay is made empirically, which can result in tiles and blocks not according to standards. This sense, this paper aims to characterize clays used in the manufacturing of red ceramic products in factory located in Colatina-ES, which appears as a ceramic pole with about twenty small and midsize industries. The clays were characterized by: Xray fluorescence, X-ray diffraction, thermal analysis (TG/DSC), granulometry and Atterberg limits. Specimens of clay and mixture containing four clays were shaped. Specimens were shaped, dried at 110°C, and burned in a kiln for 24 h. The ceramics and mechanical characteristics were evaluated: flexural strength, water absorption, apparent porosity, apparent specific mass and shrinkage by drying and firing. The characterization showed that kaolinitic clay presents high plasticity, but high porosity. The mixture formed by the four clays does not meet the requirements of the Brazilian standard clays for red ceramic. (author)

Mechanical properties of ceramics

CERN Document Server

Pelleg, Joshua

2014-01-01

This book discusses the mechanical properties of ceramics and aims to provide both a solid background for undergraduate students, as well as serving as a text to bring practicing engineers up to date with the latest developments in this topic so they can use and apply these to their actual engineering work.  Generally, ceramics are made by moistening a mixture of clays, casting it into desired shapes and then firing it to a high temperature, a process known as 'vitrification'. The relatively late development of metallurgy was contingent on the availability of ceramics and the know-how to mold them into the appropriate forms. Because of the characteristics of ceramics, they offer great advantages over metals in specific applications in which hardness, wear resistance and chemical stability at high temperatures are essential. Clearly, modern ceramics manufacturing has come a long way from the early clay-processing fabrication method, and the last two decades have seen the development of sophisticated technique...

Ancient DNA analysis of dental calculus.

Science.gov (United States)

Weyrich, Laura S; Dobney, Keith; Cooper, Alan

2015-02-01

Dental calculus (calcified tartar or plaque) is today widespread on modern human teeth around the world. A combination of soft starchy foods, changing acidity of the oral environment, genetic pre-disposition, and the absence of dental hygiene all lead to the build-up of microorganisms and food debris on the tooth crown, which eventually calcifies through a complex process of mineralisation. Millions of oral microbes are trapped and preserved within this mineralised matrix, including pathogens associated with the oral cavity and airways, masticated food debris, and other types of extraneous particles that enter the mouth. As a result, archaeologists and anthropologists are increasingly using ancient human dental calculus to explore broad aspects of past human diet and health. Most recently, high-throughput DNA sequencing of ancient dental calculus has provided valuable insights into the evolution of the oral microbiome and shed new light on the impacts of some of the major biocultural transitions on human health throughout history and prehistory. Here, we provide a brief historical overview of archaeological dental calculus research, and discuss the current approaches to ancient DNA sampling and sequencing. Novel applications of ancient DNA from dental calculus are discussed, highlighting the considerable scope of this new research field for evolutionary biology and modern medicine. Copyright © 2014 Elsevier Ltd. All rights reserved.

Truth Obviousness in Ancient Greek Philosophy

Directory of Open Access Journals (Sweden)

Halyna I. Budz

2013-01-01

Full Text Available The article examines the features of the axiomatic approach to the truth understanding in ancient Greek philosophy. Truth in the works by ancient philosophers has axiomatic essence, basing on divine origin of truth. As the truth has a divine origin, it is in reality. The reality, created by Gods is the solemn reality. Therefore, understanding of reality by man is the display of divine reality, which is true and clever. In of the context of ancient Greek philosophy, to know truth is to know something, existing in reality, in other words, something, truly existing, eternal reality. Consequently, to know truth is it to know the substantial reality base. That’s why the justification of the reality origin is the axiomatic doctrine of truth at the same time, because only fundamental principle “truly” exists and is the truth itself. The idea of fundamental principle in ancient Greek philosophy is the axiom, universal principle, which is the base of reality as a substance from ontological perspective and is realized as the truth from gnosiological perspective. Fundamental principle, as Greeks understand it, coincides with the truth, in other words, reality and thinking are identical. The idea of reality source is the universal criterion of world perception at the same time, in other words, it is the truth, which is perceived axiomatically.

Displacive Transformation in Ceramics

Science.gov (United States)

1994-02-28

PZT ), ceramics have attracted natural abundance. much attention for use in nonvolatile semiconductor mem- We attribute the observed spectra in Fig. I to...near a crack tip in piezoelectric ceramics of lead zirconate titanate ( PZT ) and barium titanate. They reasoned that the poling of ferroelectric... Texture in Ferroelastic Tetragonal Zirconia," J. Am. Ceram . Soc., 73 (1990) no. 6: 1777-1779. 27. J. F. Jue and A. Virkar, "Fabrication, Microstructural

Nano-Ceramic Coated Plastics

Science.gov (United States)

Cho, Junghyun

2013-01-01

Plastic products, due to their durability, safety, and low manufacturing cost, are now rapidly replacing cookware items traditionally made of glass and ceramics. Despite this trend, some still prefer relatively expensive and more fragile ceramic/glassware because plastics can deteriorate over time after exposure to foods, which can generate odors, bad appearance, and/or color change. Nano-ceramic coatings can eliminate these drawbacks while still retaining the advantages of the plastic, since the coating only alters the surface of the plastic. The surface coating adds functionality to the plastics such as self-cleaning and disinfectant capabilities that result from a photocatalytic effect of certain ceramic systems. These ceramic coatings can also provide non-stick surfaces and higher temperature capabilities for the base plastics without resorting to ceramic or glass materials. Titanium dioxide (TiO2) and zinc oxide (ZnO) are the candidates for a nano-ceramic coating to deposit on the plastics or plastic films used in cookware and kitchenware. Both are wide-bandgap semiconductors (3.0 to 3.2 eV for TiO2 and 3.2 to 3.3 eV for ZnO), so they exhibit a photocatalytic property under ultraviolet (UV) light. This will lead to decomposition of organic compounds. Decomposed products can be easily washed off by water, so the use of detergents will be minimal. High-crystalline film with large surface area for the reaction is essential to guarantee good photocatalytic performance of these oxides. Low-temperature processing (nano-ceramic coatings (TiO2, ZnO) on plastic materials (silicone, Teflon, PET, etc.) that can possess both photocatalytic oxide properties and flexible plastic properties. Processing cost is low and it does not require any expensive equipment investment. Processing can be scalable to current manufacturing infrastructure.

Producing ceramic laminate composites by EPD

International Nuclear Information System (INIS)

Nicholson, P.S.; Sarkar, P.; Datta, S.

1996-01-01

The search for tough structural ceramics to operate at high temperatures in hostile environments has led to the development of ceramic composites. This class of material includes laminar ceramic-ceramic composites, continuous-fiber-reinforced ceramic composites and functionally graded materials. The present authors developed electrophoretic deposition (EPD) to synthesize lamellar, fiber-reinforced and functionally graded composites. This paper briefly describes the synthesis and characterization of these EPD composites and introduces a novel class of lamellar composites with nonplanar layers. The synthesis of the latter demonstrates the facility of the EPD process for the synthesis of ceramic composites. The process is totally controllable via suspension concentration, deposition current, voltage and time

Early Pottery Making in Northern Coastal Peru. Part II: Field Firing Experiments

Science.gov (United States)

Shimada, I.; Goldstein, D.; Sosa, J.; Wagner, U.

2003-09-01

We present data from three seasons of experimental field work designed to recreate ancient Andean coastal ceramic firing techniques. Based on the recent discovery of two different archaeological ceramic production sites in the La Leche river valley of northern coastal Peru, the opportunity arose to apply Mössbauer spectroscopy and other analytical methods to reconstruct ancient firing procedures. Two sets of firings took place in 1993 and 1997 in Batán Grande using a partially restored Formative kiln from about 800 BC, local hardwood and cow dung as fuel. A third experiment followed in 2000 after the discovery of a Middle Sicán ceramics workshop in use between ca. AD 950 and 1050 at Huaca Sialupe, where an exact replica of an ancient kiln was built from local clay, and fired with local wood and cow dung. Additionally, inverted urns found at Huaca Sialupe were tested for their potential use as furnaces for metal working. Mössbauer spectroscopy was used to compare the physical and chemical state of specimens produced in the field experiments with ancient ceramics and with specimens produced in controlled laboratory experiments.

Corrosion resistant ceramic materials

Science.gov (United States)

Kaun, T.D.

1996-07-23

Ceramic materials are disclosed which exhibit stability in severely-corrosive environments having high alkali-metal activity, high sulfur/sulfide activity and/or molten halides at temperatures of 200--550 C or organic salt (including SO{sub 2} and SO{sub 2}Cl{sub 2}) at temperatures of 25--200 C. These sulfide ceramics form stoichiometric (single-phase) compounds with sulfides of Ca, Li, Na, K, Al, Mg, Si, Y, La, Ce, Ga, Ba, Zr and Sr and show melting-points that are sufficiently low and have excellent wettability with many metals (Fe, Ni, Mo) to easily form metal/ceramic seals. Ceramic compositions are also formulated to adequately match thermal expansion coefficient of adjacent metal components. 1 fig.

Corrosion resistant ceramic materials

Science.gov (United States)

Kaun, Thomas D.

1996-01-01

Ceramic materials which exhibit stability in severely-corrosive environments having high alkali-metal activity, high sulfur/sulfide activity and/or molten halides at temperatures of 200.degree.-550.degree. C. or organic salt (including SO.sub.2 and SO.sub.2 Cl.sub.2) at temperatures of 25.degree.-200.degree. C. These sulfide ceramics form stoichiometric (single-phase) compounds with sulfides of Ca, Li, Na, K, Al, Mg, Si, Y, La, Ce, Ga, Ba, Zr and Sr and show melting-points that are sufficiently low and have excellent wettability with many metals (Fe, Ni, Mo) to easily form metal/ceramic seals. Ceramic compositions are also formulated to adequately match thermal expansion coefficient of adjacent metal components.

Colour Perception in Ancient World

Science.gov (United States)

Nesterov, D. I.; Fedorova, M. Yu

2017-11-01

How did the human thought form the surrounding color information into the persistent semantic images of a mythological, pseudoscientific and religious nature? The concepts associated with colour perception are suggested. The existence of colour environment does not depend on the human consciousness. The colour culture formation is directly related to the level of the human consciousness development and the possibility to influence the worldview and culture. The colour perception of a person goes through the stages similar to the development of colour vision in a child. Like any development, the colour consciousness has undergone stages of growth and decline, evolution and stagnation. The way of life and difficult conditions for existence made their own adjustments to the development of the human perception of the surrounding world. Wars have been both a powerful engine of progress in all spheres of life and a great destructive force demolishing the already created and preserved heritage. The surrounding world has always been interesting for humans, evoked images and fantasies in the consciousness of ancient people. Unusual and inexplicable natural phenomena spawned numerous legends and myths which was reflected in the ancient art and architecture and, accordingly, in a certain manifestation of colour in the human society. The colour perception of the ancient man, his pragmatic, utilitarian attitude to colour is considered as well as the influence of dependence on external conditions of existence and their reflection in the colour culture of antiquity. “Natural Science” conducts research in the field of the colour nature and their authorial interpretation of the Hellenic period. Several authorial concepts of the ancient world have been considered.

New ceramic materials

International Nuclear Information System (INIS)

Moreno, R.; Dominguez-Rodriguez, A.

2010-01-01

This article is to provide a new ceramic materials in which, with a control of their processing and thus their microstructural properties, you can get ceramic approaching ever closer to a metal, both in its structural behavior at low as at high temperatures. (Author) 30 refs.

Environment Conscious Ceramics (Ecoceramics): An Eco-Friendly Route to Advanced Ceramic Materials

Science.gov (United States)

Singh, M.

2001-01-01

Environment conscious ceramics (Ecoceramics) are a new class of materials, which can be produced with renewable natural resources (wood) or wood wastes (wood sawdust). This technology provides an eco-friendly route to advanced ceramic materials. Ecoceramics have tailorable properties and behave like ceramic materials manufactured by conventional approaches. Silicon carbide-based ecoceramics have been fabricated by reactive infiltration of carbonaceous preforms by molten silicon or silicon-refractory metal alloys. The fabrication approach, microstructure, and mechanical properties of SiC-based ecoceramics are presented.

Polymer-ceramic piezoelectric composites (PZT)

International Nuclear Information System (INIS)

Bassora, L.A.; Eiras, J.A.

1992-01-01

Polymer-ceramic piezoelectric transducers, with 1-3 of connectivity were prepared with different concentration of ceramic material. Piezoelectric composites, with equal electromechanical coupling factor and acoustic impedance of one third from that ceramic transducer, were obtained when the fractionary volume of PZT reach 30%. (C.G.C.)

Dacic Ancient Astronomical Research in Sarmizegetuza

Directory of Open Access Journals (Sweden)

Emanuel George Oprea

2015-11-01

Full Text Available The actual Romanian territory belongs to Carpatho-Danubian Space and to Ancient Europe. The Ancient European Society was a vast cultural entity based on a theocratic, matriarchal society, peaceful and art creating.Temples of Sarmizegetusa have given rise to several theories over time, proven by historians with the most diverse arguments. The largest complex of temples and sanctuaries was founded in Sarmizegetusa Regia, the Dacian’s main fortress and ancient capital of Dacia in the time of King Decebalus. The mysterious form of settlements has led researchers to the conclusion that the locations were astronomical observation shrines. Among the places of Dacian worship in Orastie Mountains the most impressive is the Great Circular Sanctuary, used to perform some celestial observations, and also as original solar calendar. This paper had the purpose to re-discover the Dacian Civilization and Dacian cosmogony based on the accumulated knowledge upon our country’s past.

Did the ancient egyptians discover Algol?

Science.gov (United States)

Jetsu, L.; Porceddu, S.; Porceddu, S.; Lyytinen, J.; Kajatkari, P.; Markkanen, T.; Toivari-Viitala, J.

2013-02-01

Fabritius discovered the first variable star, Mira, in 1596. Holwarda determined the 11 months period of Mira in 1638. Montanari discovered the next variable star, Algol, in 1669. Its period, 2.867 days, was determined by Goodricke (178). Algol was associated with demon-like creatures, "Gorgon" in ancient Greek and "ghoul" in ancient Arab mythology. This indicates that its variability was discovered much before 1669 (Wilk 1996), but this mythological evidence is ambiguous (Davis 1975). For thousands of years, the Ancient Egyptian Scribes (AES) observed stars for timekeeping in a region, where there are nearly 300 clear nights a year. We discovered a significant periodicity of 2.850 days in their calendar for lucky and unlucky days dated to 1224 BC, "the Cairo Calendar". Several astrophysical and astronomical tests supported our conclusion that this was the period of Algol three millennia ago. The "ghoulish habits" of Algol could explain this 0.017 days period increase (Battersby 2012).

[Ceramic inlays and onlays].

Science.gov (United States)

van Pelt, A W; de Kloet, H J; van der Kuy, P

1996-11-01

Large direct composite restorations can induce shrinkage related postoperative sensitivity. Indirect resin-bonded (tooth colored) restorations may perhaps prevent these complaints. Indirect bonded ceramics are especially attractive because of their biocompatibility and esthetic performance. Several procedures and techniques are currently available for the fabrication of ceramic restorations: firing, casting, heat-pressing and milling. In this article the different systems are described. Advantages, disadvantages and clinical performance of ceramic inlays are compared and discussed.

Continuous Fiber Ceramic Composites

Energy Technology Data Exchange (ETDEWEB)

Fareed, Ali [Honeywell Advanced Composites Inc. (HACI), Newark, DE (United States); Craig, Phillip A. [Honeywell Advanced Composites Inc. (HACI), Newark, DE (United States)

2002-09-01

Fiber-reinforced ceramic composites demonstrate the high-temperature stability of ceramics--with an increased fracture toughness resulting from the fiber reinforcement of the composite. The material optimization performed under the continuous fiber ceramic composites (CFCC) included a series of systematic optimizations. The overall goals were to define the processing window, to increase the robustinous of the process, to increase process yield while reducing costs, and to define the complexity of parts that could be fabricated.

High flow ceramic pot filters

NARCIS (Netherlands)

van Halem, D.; van der Laan, H.; Soppe, A. I.A.; Heijman, S.G.J.

2017-01-01

Ceramic pot filters are considered safe, robust and appropriate technologies, but there is a general consensus that water revenues are limited due to clogging of the ceramic element. The objective of this study was to investigate the potential of high flow ceramic pot filters to produce more

Ceramic membrane development in NGK

Energy Technology Data Exchange (ETDEWEB)

Araki, Kiyoshi; Sakai, Hitoshi, E-mail: kinsakai@ngk.co.jp [Corporate R and D, NGK Insulators, Ltd., Nagoya 467-8530 (Japan)

2011-05-15

NGK Insulators, Ltd. was established in 1919 to manufacture the electric porcelain insulators for power transmission lines. Since then, our business has grown as one of the world-leading ceramics manufacturing companies and currently supply with the various environmentally-benign ceramic products to worldwide. In this paper, ceramic membrane development in NGK is described in detail. We have been selling ceramic microfiltration (MF) membranes and ultra-filtration (UF) membranes for many years to be used for solid/liquid separation in various fields such as pharmaceutical, chemical, food and semiconductor industries. In Corporate R and D, new ceramic membranes with sub-nanometer sized pores, which are fabricated on top of the membrane filters as support, are under development for gas and liquid/liquid separation processes.

Ceramic membrane development in NGK

Science.gov (United States)

Araki, Kiyoshi; Sakai, Hitoshi

2011-05-01

NGK Insulators, Ltd. was established in 1919 to manufacture the electric porcelain insulators for power transmission lines. Since then, our business has grown as one of the world-leading ceramics manufacturing companies and currently supply with the various environmentally-benign ceramic products to worldwide. In this paper, ceramic membrane development in NGK is described in detail. We have been selling ceramic microfiltration (MF) membranes and ultra-filtration (UF) membranes for many years to be used for solid/liquid separation in various fields such as pharmaceutical, chemical, food and semiconductor industries. In Corporate R&D, new ceramic membranes with sub-nanometer sized pores, which are fabricated on top of the membrane filters as support, are under development for gas and liquid/liquid separation processes.

Indigenous cosmology, art forms and past medicinal practices: towards an interpretation of ancient Koma Land sites in northern Ghana.

Science.gov (United States)

Kankpeyeng, Benjamin W; Nkumbaan, Samuel N; Insoll, Timothy

2011-08-01

The ancient cultural tradition in the middle belt region of northern Ghana, with its stone circle and house mounds, contains varied material culture. The unique contextual arrangements of the material culture within the stone circle mounds and the diverse ceramic art forms, as well as their ethnographic analogues in West Africa, indicate the mounds' association with past shrines that have multiple functions, including curative purposes. The archaeology of the mounds and ethnographic associations related to past indigenous medical practices is reviewed and discussed. This paper will also consider how some of the figurines through which the Koma tradition has achieved 'fame' possibly functioned as physical representations of disease, perhaps underpinned by intentions of transference from afflicted to image. The notions of protection and healing are also examined with reference to the resorted and disarticulated human remains sometimes recovered from the sites.

Radiopaque Strontium Fluoroapatite Glass-Ceramics

Science.gov (United States)

Höland, Wolfram; Schweiger, Marcel; Dittmer, Marc; Ritzberger, Christian

2015-01-01

The controlled precipitation of strontium fluoroapatite crystals was studied in four base glass compositions derived from the SiO2–Al2O3–Y2O3–SrO–Na2O–K2O/Rb2O/Cs2O–P2O5–F system. The crystal phase formation of these glasses and the main properties of the glass-ceramics, such as thermal and optical properties and radiopacity were compared with a fifth, a reference glass-ceramic. The reference glass-ceramic was characterized as Ca-fluoroapatite glass-ceramic. The four strontium fluoroapatite glass-ceramics showed the following crystal phases: (a) Sr5(PO4)3F – leucite, KAlSi2O6, (b) Sr5(PO4)3F – leucite, KAlSi2O6, and nano-sized NaSrPO4, (c) Sr5(PO4)3F – pollucite, CsAlSi2O6, and nano-sized NaSrPO4, and (d) Sr5(PO4)3F – Rb-leucite, RbAlSi2O6, and nano-sized NaSrPO4. The proof of crystal phase formation was possible by X-ray diffraction. The microstructures, which were studied using scanning electron microscopy, demonstrated a uniform distribution of the crystals in the glass matrix. The Sr-fluoroapatites were precipitated based on an internal crystallization process, and the crystals demonstrated a needle-like morphology. The study of the crystal growth of needle-like Sr-fluoroapatites gave a clear evidence of an Ostwald ripening mechanism. The formation of leucite, pollucite, and Rb-leucite was based on a surface crystallization mechanism. Therefore, a twofold crystallization mechanism was successfully applied to develop these types of glass-ceramics. The main focus of this study was the controlled development of glass-ceramics exhibiting high radiopacity in comparison to the reference glass-ceramic. This goal could be achieved with all four glass-ceramics with the preferred development of the Sr-fluoroapatite – pollucite-type glass-ceramic. In addition to this main development, it was possible to control the thermal properties. Especially the Rb-leucite containing glass-ceramic showed the highest coefficient of thermal

Radiopaque Strontium Fluoroapatite Glass-Ceramics.

Science.gov (United States)

Höland, Wolfram; Schweiger, Marcel; Dittmer, Marc; Ritzberger, Christian

2015-01-01

The controlled precipitation of strontium fluoroapatite crystals was studied in four base glass compositions derived from the SiO2-Al2O3-Y2O3-SrO-Na2O-K2O/Rb2O/Cs2O-P2O5-F system. The crystal phase formation of these glasses and the main properties of the glass-ceramics, such as thermal and optical properties and radiopacity were compared with a fifth, a reference glass-ceramic. The reference glass-ceramic was characterized as Ca-fluoroapatite glass-ceramic. The four strontium fluoroapatite glass-ceramics showed the following crystal phases: (a) Sr5(PO4)3F - leucite, KAlSi2O6, (b) Sr5(PO4)3F - leucite, KAlSi2O6, and nano-sized NaSrPO4, (c) Sr5(PO4)3F - pollucite, CsAlSi2O6, and nano-sized NaSrPO4, and (d) Sr5(PO4)3F - Rb-leucite, RbAlSi2O6, and nano-sized NaSrPO4. The proof of crystal phase formation was possible by X-ray diffraction. The microstructures, which were studied using scanning electron microscopy, demonstrated a uniform distribution of the crystals in the glass matrix. The Sr-fluoroapatites were precipitated based on an internal crystallization process, and the crystals demonstrated a needle-like morphology. The study of the crystal growth of needle-like Sr-fluoroapatites gave a clear evidence of an Ostwald ripening mechanism. The formation of leucite, pollucite, and Rb-leucite was based on a surface crystallization mechanism. Therefore, a twofold crystallization mechanism was successfully applied to develop these types of glass-ceramics. The main focus of this study was the controlled development of glass-ceramics exhibiting high radiopacity in comparison to the reference glass-ceramic. This goal could be achieved with all four glass-ceramics with the preferred development of the Sr-fluoroapatite - pollucite-type glass-ceramic. In addition to this main development, it was possible to control the thermal properties. Especially the Rb-leucite containing glass-ceramic showed the highest coefficient of thermal expansion (CTE). These

Radiopaque strontium fluoroapatite glass-ceramics

Directory of Open Access Journals (Sweden)

Wolfram eHöland

2015-10-01

Full Text Available The controlled precipitation of strontium fluoroapatite crystals, was studied in four base glass compositions derived from the SiO2 – Al2O3 – Y2O3 – SrO – Na2O – K2O/Rb2O/Cs2O – P2O5 – F system. The crystal phase formation of these glasses and the main properties of the glass-ceramics, such as thermal and optical properties and radiopacity were compared with a fifth, a reference glass-ceramic. The reference glass-ceramic was characterized as Ca-fluoroapatite glass-ceramic. The four strontium fluoroapatite glass-ceramics showed the following crystal phases: a Sr5(PO43F – leucite, KAlSi2O6 , b Sr5(PO43F – leucite, KAlSi2O6, and nano-sized NaSrPO4 c Sr5(PO43F – pollucite, CsAlSiO4 , and nano-sized NaSrPO4, d Sr5(PO43F – Rb-leucite, RbAlSi2O6, and nano-sized NaSrPO4.The proof of crystal phase formation was possible by X-ray diffraction (XRD. The microstructures, which were studied using scanning electron microscopy (SEM demonstrated a uniform distribution of the crystals in the glass matrix. The Sr-fluoroapatites were precipitated based on an internal crystallization process, and the crystals demonstrated a needlelike morphology. The study of the crystal growth of needlelike Sr-fluoroapatites gave a clear evidence of an Ostwald ripening mechanism.The formation of leucite, pollucite and Rb-leucite was based on a surface crystallization mechanism. Therefore, a twofold crystallization mechanism was successfully applied to develop these types of glass-ceramics. The main focus of this study was the controlled development of glass-ceramics exhibiting high radiopacity in comparison to the reference glass-ceramic. This goal could be achieved with all four glass-ceramics with the preferred development of the Sr-fluoroapatite – pollucite-type glass-ceramic. In addition to this main development, it was possible to control the thermal properties. Especially the Rb-leucite containing glass-ceramic showed the highest coefficient of thermal

Dating ancient monuments by nuclear radiation

International Nuclear Information System (INIS)

Goedicke, C.

2000-01-01

In the fifties and sixties several disciplines dealing with chronologies but lacking precise methods of measurements (geology, biology, archaeology and art history) became aware of the radioactive decay as a tool of measuring elapsed time. Among the disciplines that benefit most from physical methods archaeology has to be named first. So was archaeological work revolutionised by the introduction of the C-14 dating method. A wider selection of material became datable after the introduction of luminescence techniques using the effect of nuclear radiation on semiconductors. These minerals are widespread among archaeological materials. In ancient monuments, the objective of this paper, semiconductors almost exclusively form the material basis. Over the last four millennia wood, stone, mortar and fired bricks have been used for the construction of buildings. After discussing methods taking wood as a dating material, a broader view will be given on the results achieved by luminescence dating of fired bricks, mortar and stone. For many years brick dating was performed by thermoluminescence, the recipes followed those of ceramic dating. Preferably multiple aliquot additive dose protocols were used on polymineral fine grain fractions (1-10 μm). It was expected that the error in dating monuments would be smaller compared to ceramic dating, because of the constancy of the environmental conditions which a brick experiences during its lifetime. However, the variability of firing temperatures in brick kilns overthrows this advantage. Therefore, the demands of art historians to fall short of an error margin of 5% could generally not be fulfilled. Especially in medieval or renaissance times the temporal resolution of thermoluminescence is inferior to traditional stylistic dating as long as specific stylistic forms are present. New optical luminescence techniques and a new philosophy of dose evaluation, based on single aliquot regeneration protocols, produce less scatter, and in

Polyphase ceramic and glass-ceramic forms for immobilizing ICPP high-level nuclear waste

International Nuclear Information System (INIS)

Harker, A.B.; Flintoff, J.F.

1984-01-01

Polyphase ceramic and glass-ceramic forms have been consolidated from simulated Idaho Chemical Processing Plant wastes by hot isostatic pressing calcined waste and chemical additives by 1000 0 C or less. The ceramic forms can contain over 70 wt% waste with densities ranging from 3.5 to 3.85 g/cm 3 , depending upon the formulation. Major phases are CaF 2 , CaZrTi 207 , CaTiO 3 , monoclinic ZrO 2 , and amorphous intergranular material. The relative fraction of the phases is a function of the chemical additives (TiO 2 , CaO, and SiO 2 ) and consolidation temperature. Zirconolite, the major actinide host, makes the ceramic forms extremely leach resistant for the actinide simulant U 238 . The amorphous phase controls the leach performance for Sr and Cs which is improved by the addition of SiO 2 . Glass-ceramic forms were also consolidated by HIP at waste loadings of 30 to 70 wt% with densities of 2.73 to 3.1 g/cm 3 using Exxon 127 borosilicate glass frit. The glass-ceramic forms contain crystalline CaF 2 , Al 203 , and ZrSi 04 (zircon) in a glass matrix. Natural mineral zircon is a stable host for 4+ valent actinides. 17 references, 3 figures, 5 tables

Prestresses in bilayered all-ceramic restorations.

Science.gov (United States)

Aboushelib, Moustafa N; Feilzer, Albert J; de Jager, Niek; Kleverlaan, Cornelis J

2008-10-01

A general trend in all ceramic systems is to use veneering ceramics of slightly lower thermal expansion coefficients compared with that of the framework resulting in a positive mismatch in thermal expansion coefficient (+DeltaTEC). The concept behind this TEC mismatch is to generate compressive stresses in the weaker veneering ceramic and thus enhance the overall strength of the restoration. This technique had excellent results with porcelain fused to metal restorations (PFM). However, there are concerns to apply this concept to all-ceramic restorations. The aim of this research was to determine the stresses in bilayered all-ceramic restorations due to the mismatch in TEC. Two commercial veneering ceramics with a TEC lower than that of zirconia (+DeltaTEC); NobelRondo zirconiatrade mark and Lava Ceramtrade mark, plus one experimental veneering ceramic with an identical TEC that matches that of zirconia (DeltaTEC = 0) were used to veneer zirconia discs. The specimens were loaded in biaxial flexure test setup with the veneer ceramic in tension. The stresses due to load application and TEC mismatch were calculated using fractography, engineering mathematics, and finite element analysis (FEA). In this study, the highest load at failure (64 N) was obtained with the experimental veneer where the thermal mismatch between zirconia and veneering ceramic was minimal. For the two commercial veneer ceramics the magnitude of the thermal mismatch localized at the zirconia veneer interface (42 MPa) exceeded the bond strength between the two materials and resulted in delamination failure during testing (ca. 50 MPa). For all-ceramic zirconia veneered restorations it is recommended to minimize the thermal mismatch as much as possible. (c) 2008 Wiley Periodicals, Inc.

Fracture mechanics of ceramics. Vol. 7

International Nuclear Information System (INIS)

Bradt, R.C.; Evans, A.G.; Hasselman, D.P.; Lange, F.F.

1986-01-01

This volume, together with volume 8, constitutes the proceedings of an international symposium on the fracture mechanics of ceramics. The topics discussed in this volume include the toughening of ceramics by whisker reinforcement; the mechanical properties of SiCwhisker-reinforced TZP; the fracture of brittle rock and oil shale under dynamic explosive loading; impact damage models of ceramic coatings used in gas turbine and diesel engines; the use of exploratory data analysis for the safety evaluation of structural ceramics; and proof testing methods for the reliability of structural ceramics used in gas turbines

Ceramic nanostructures and methods of fabrication

Science.gov (United States)

Ripley, Edward B [Knoxville, TN; Seals, Roland D [Oak Ridge, TN; Morrell, Jonathan S [Knoxville, TN

2009-11-24

Structures and methods for the fabrication of ceramic nanostructures. Structures include metal particles, preferably comprising copper, disposed on a ceramic substrate. The structures are heated, preferably in the presence of microwaves, to a temperature that softens the metal particles and preferably forms a pool of molten ceramic under the softened metal particle. A nano-generator is created wherein ceramic material diffuses through the molten particle and forms ceramic nanostructures on a polar site of the metal particle. The nanostructures may comprise silica, alumina, titania, or compounds or mixtures thereof.

All-ceramic restorations: an overview.

Science.gov (United States)

Bassi, F; Carossa, S; Pera, P; Preti, G

1998-09-01

Advantages and disadvantages of metal-ceramic and all-ceramic restorations are reviewed particularly from the aesthetic point of view. All-ceramic restorations offer the best results because they let the light through optimally. In constructing all-ceramic crowns on teeth which have been endodontically treated, the material used to rebuild the pin-abutments must be taken into consideration if the best aesthetic results are to be achieved. Materials which, because of their translucent characteristics, are the most aesthetic alternatives to metal alloy pin-abutments in rebuilding teeth which have been endodontically treated, are then described.

Structural integrity of ceramic multilayer capacitor materials and ceramic multilayer capacitors

NARCIS (Netherlands)

With, de G.

1993-01-01

An review with 61 refs. is given of the fracture of and stress situation in ceramic capacitor materials and ceramic multilayer capacitors. A brief introduction to the relevant concepts is given first. Next the data for capacitor materials and the data for capacitors are discussed. The materials data

Linen in Ancient Egypt

Directory of Open Access Journals (Sweden)

dr.Rehab Mahmoud Ahmed Elsharnouby

2014-01-01

Full Text Available Egypt was famous through the Ancient Near East for both weaving linen cloth and the produced quantities. Cloth was sent as expensive gifts from one king to another and given to a laborer as wages in return for his work. Cloth was regarded as an essential element in everyday life as it could be used for everything: clothing, bedding, trappings for animals, or sails of a ship. It was in fact one of the most widely used item throughout Ancient Egypt. Although other textile fibers were used in Pharaonic Egypt, namely, sheep's wool, goat hair and a form of coir, the majority of textiles were made from the plant Linum usitatissimum, flax. Cloth made from this fiber is defined as linen. The research starts with a brief definition of the flax, and then reviews the scenes representing the sowing and the harvesting of its seeds. It also focuses on the way of removing the seeds heads, the preparing of the flax for spinning: retting, beating and scutching. After that, it deals with transforming flax into orderly lengths, and rolling it into balls or coils. The researcher as well studies the Ancient Egyptian spinning techniques: grasped spindle, support spindle and drop spinning; the different types of weaving: tabby weaves, basket weaves, tapestry weaves and warps-patterned weave and the types of looms that were in use in Egypt, namely, the horizontal and vertical looms.

Ceramic impregnated superabrasives

Science.gov (United States)

Radtke, Robert P.; Sherman, Andrew

2009-02-10

A superabrasive fracture resistant compact is formed by depositing successive layers of ceramic throughout the network of open pores in a thermally stable self-bonded polycrystalline diamond or cubic boron nitride preform. The void volume in the preform is from approximately 2 to 10 percent of the volume of the preform, and the average pore size is below approximately 3000 nanometers. The preform is evacuated and infiltrated under at least about 1500 pounds per square inch pressure with a liquid pre-ceramic polymerizable precursor. The precursor is infiltrated into the preform at or below the boiling point of the precursor. The precursor is polymerized into a solid phase material. The excess is removed from the outside of the preform, and the polymer is pyrolized to form a ceramic. The process is repeated at least once more so as to achieve upwards of 90 percent filling of the original void volume. When the remaining void volume drops below about 1 percent the physical properties of the compact, such as fracture resistance, improve substantially. Multiple infiltration cycles result in the deposition of sufficient ceramic to reduce the void volume to below 0.5 percent. The fracture resistance of the compacts in which the pores are lined with formed in situ ceramic is generally at least one and one-half times that of the starting preforms.

Tribological properties of toughened zirconia-based ceramics

International Nuclear Information System (INIS)

Stachowiak, G.W.; Stachowiak, G.B.

1991-01-01

The physical and mechanical properties of toughened zirconia ceramics are briefly characterized and described with a special emphasis on their tribological behaviour. The wear and friction properties of PSZ and TZP ceramics at room and elevated temperatures are described. The influence of the environment on the tribological characteristics of zirconia ceramics is discussed. Both lubricated and unlubricated conditions for ceramic/ceramic and metal/ceramic sliding contacts are analysed. One of the main, and as yet unresolved problems, lubrication of ceramic at elevated temperatures and/or space environment, is addressed and the possible solutions to the problem are suggested. The critical needs in the research and development area of improving the tribological properties of zirconia ceramics are defined and its future market potentials stated. 30 refs., 2 tabs., 4 figs

OXYGEN TRANSPORT CERAMIC MEMBRANES

Energy Technology Data Exchange (ETDEWEB)

Dr. Sukumar Bandopadhyay; Dr. Nagendra Nagabhushana

2000-10-01

This is the third quarterly report on oxygen Transport Ceramic Membranes. In the following, the report describes the progress made by our university partners in Tasks 1 through 6, experimental apparatus that was designed and built for various tasks of this project, thermodynamic calculations, where applicable and work planned for the future. (Task 1) Design, fabricate and evaluate ceramic to metal seals based on graded ceramic powder/metal braze joints. (Task 2) Evaluate the effect of defect configuration on ceramic membrane conductivity and long term chemical and structural stability. (Task 3) Determine materials mechanical properties under conditions of high temperatures and reactive atmospheres. (Task 4) Evaluate phase stability and thermal expansion of candidate perovskite membranes and develop techniques to support these materials on porous metal structures. (Task 5) Assess the microstructure of membrane materials to evaluate the effects of vacancy-impurity association, defect clusters, and vacancy-dopant association on the membrane performance and stability. (Task 6) Measure kinetics of oxygen uptake and transport in ceramic membrane materials under commercially relevant conditions using isotope labeling techniques.

Ancient Wisdom, Applied Knowledge for a Sustainable Future

Science.gov (United States)

Peterson, K.; Philippe, R. Elde; Dardar, T. M. Elde

2017-12-01

Ancient wisdom informs traditional knowledges that guide Indigenous communities on how to interact with the world. These knowledges and the ancient wisdom have been the life-giving forces that have prevented the complete genocide of Indigenous peoples, and is also the wisdom that is rejuvenating ancient ways that will take the world into a future that embraces the seventh generation philosophy.. Western scientists and agency representatives are learning from the work and wisdom of Native Americans. This presentation will share the ways in which the representatives of two Tribes along the coast of Louisiana have been helping to educate and apply their work with Western scientists.

Radiocarbon ages of Sorori ancient rice of Korea

Energy Technology Data Exchange (ETDEWEB)

Kim, Kyeong Ja, E-mail: kjkim@kigam.re.kr [Korea Institute of Geoscience and Mineral Resources, Daejeon (Korea, Republic of); Lee, Yung-Jo; Woo, Jong-Yoon [Institute of Korean Prehistory, Cheongju (Korea, Republic of); Jull, A.J. Timothy [NSF Arizona AMS Laboratory, University of Arizona, Tucson, AZ 85721 (United States)

2013-01-15

Samples of Sorori ancient rice were excavated in 1998 from the Sorori Paleolithic site located at Sorori, Oksan-myeon, Cheong-won County in Chungcheongbuk-do, Korea. We have made new radiocarbon measurements for Sorori samples in 2009 at the NSF Arizona AMS Laboratory. Both ancient rice samples and surrounded peat from the Sorori site were dated. The AMS results confirmed that the ages of the rice and peat soil were 12,520 {+-} 150 and 12,552 {+-} 90 BP, respectively. These radiocarbon ages are consistent with the previously published data of quasi rice measured at Seoul National University and confirm that the Sorori rice is the oldest ancient rice currently reported.

Hemorrhagic iliopsoas bursitis complicating well-functioning ceramic-on-ceramic total hip arthroplasty.

Science.gov (United States)

Park, Kyung Soon; Diwanji, Sanket R; Kim, Hyung Keun; Song, Eun Kyoo; Yoon, Taek Rim

2009-08-01

Iliopsoas bursitis has been increasingly recognized as a complication of total hip arthroplasty and is usually associated with polyethylene wear. Here, the authors report a case of hemorrhagic iliopsoas bursitis complicating an otherwise well-functioning ceramic-on-ceramic arthroplasty performed by minimal invasive modified 2-incision technique. The bursitis in turn resulted in femoral nerve palsy and femoral vein compression. In this report, there was no evidence to support that the bursitis was due to an inflammatory response to ceramic wear particles or any other wear particles originating from the total hip arthroplasty.

An Ancient Inca Tax and Metallurgy in Peru

Science.gov (United States)

Journal of Chemical Education, 2007

2007-01-01

The discovery of ancient Inca tax rulers and other metallurgical objects in Peru show that the ancient civilizations of the country smelted metals. The analysis shows that the smelters in Peru switched from the production of copper to silver after a tax was imposed on them by the Inca rulers.

High-temperature materials and structural ceramics

International Nuclear Information System (INIS)

1990-01-01

This report gives a survey of research work in the area of high-temperature materials and structural ceramics of the KFA (Juelich Nuclear Research Center). The following topics are treated: (1) For energy facilities: ODS materials for gas turbine blades and heat exchangers; assessment of the remaining life of main steam pipes, material characterization and material stress limits for First-Wall components; metallic and graphitic materials for high-temperature reactors. (2) For process engineering plants: composites for reformer tubes and cracking tubes; ceramic/ceramic joints and metal/ceramic and metal/metal joints; Composites and alloys for rolling bearing and sliding systems up to application temperatures of 1000deg C; high-temperature corrosion of metal and ceramic material; porous ceramic high-temperature filters and moulding coat-mix techniques; electrically conducting ceramic material (superconductors, fuel cells, solid electrolytes); high-temperature light sources (high-temperature chemistry); oil vapor engines with caramic components; ODS materials for components in diesel engines and vehicle gas turbines. (MM) [de

Ceramic Inlays: Effect of Mechanical Cycling and Ceramic Type on Restoration-dentin Bond Strength.

Science.gov (United States)

Trindade, F Z; Kleverlaan, C J; da Silva, L H; Feilzer, A J; Cesar, P F; Bottino, M A; Valandro, L F

2016-01-01

This study aimed to evaluate the bond strength between dentin and five different ceramic inlays in permanent maxillary premolars, with and without mechanical cycling. One hundred permanent maxillary premolars were prepared and divided into 10 groups (n=10) according to the ceramic system (IPS e.Max Press; IPS e.Max CAD; Vita PM9; Vita Mark II; and Vita VM7) and the mechanical cycling factor (with and without [100 N, 2 Hz, 1.2×10(6) cycles]). The inlays were adhesively cemented, and all of the specimens were cut into microbars (1×1 mm, nontrimming method), which were tested under microtensile loading. The failure mode was classified and contact angle, roughness, and microtopographic analyses were performed on each ceramic surface. The mechanical cycling had a significant effect (p=0.0087) on the bond strength between dentin and IPS e.max Press. The Vita Mark II group had the highest bond strength values under both conditions, with mechanical cycling (9.7±1.8 MPa) and without (8.2±1.9 MPa), while IPS e.Max CAD had the lowest values (2.6±1.6 and 2.2±1.4, respectively). The adhesive failure mode at the ceramic/cement interface was the most frequent. Vita Mark II showed the highest value of average roughness. IPS e.max Press and Vita Mark II ceramics presented the lowest contact angles. In conclusion, the composition and manufacturing process of ceramics seem to have an influence on the ceramic surface and resin cement bond strength. Mechanical cycling did not cause significant degradation on the dentin and ceramic bond strength under the configuration used.

Light scattering in glass-ceramics

International Nuclear Information System (INIS)

Hendy, S.C.

2002-01-01

Full text: Glass-ceramic materials with microstructures comprised of dispersed nanocrystallites in a residual glass matrix show promise for many new technological applications. In particular, transparent glass-ceramics offer low thermal expansion and stability, in addition to the prospect of novel non-linear optical properties that can arise from the nanocrystallites. Good transparency requires low optical scattering and low atomic absorption. Light scattering in the glass-ceramic arises primarily from the glass-crystallite interface. The attenuation due to scattering (turbidity) will depend upon the difference in refractive index of the two phases and the size and distribution of nanocrystallites in the glass. Here we consider models of glass-ceramic structure formation and look at scattering in these model structures to increase our understanding of the transparency of glass-ceramics

Wear characteristics of polished and glazed lithium disilicate ceramics opposed to three ceramic materials.

Science.gov (United States)

Saiki, Osamu; Koizumi, Hiroyasu; Akazawa, Nobutaka; Kodaira, Akihisa; Okamura, Kentaro; Matsumura, Hideo

2016-01-01

This study compared the wear characteristics of a heat-pressed lithium disilicate ceramic material opposed to feldspathic porcelain, a lithium disilicate glass ceramic, and zirconia materials. Ceramic plate specimens were prepared from feldspathic porcelain (EX-3 nA1B), lithium disilicate glass ceramics (e.max CAD MO1/C14), and zirconia (Katana KT 10) and then ground or polished. Rounded rod specimens were fabricated from heat-pressed lithium disilicate glass ceramic (e.max press LT A3) and then glazed or polished. A sliding wear testing apparatus was used for wear testing. Wear of glazed rods was greater than that of polished rods when they were abraded with ground zirconia, ground porcelain, polished porcelain, or polished lithium disilicate ceramics. For both glazed and polished rods, wear was greater when the rods were abraded with ground plates. The findings indicate that application of a polished surface rather than a glazed surface is recommended for single restorations made of heat-pressed lithium disilicate material. In addition, care must be taken when polishing opposing materials, especially those used in occlusal contact areas. (J Oral Sci 58, 117-123, 2016).

Neutron activation analysis of some ancient and modern Chinese Jun Porcelain samples

International Nuclear Information System (INIS)

Gao Zhengyao; Wang Jie; Chen Songhua; Huang Zhongxiang; Han Song; Jia Xiuqin

1997-01-01

Up to 43 glaze and body samples of ancient and modern Chinese Jun Porcelain and other porcelain are chosen and contents of 36 elements for each sample are determined by NAA. The NAA data are then analysed by the fuzzy cluster method. The result shows that although the ancient Jun Porcelain samples span leaped 600 years and are from different kilns and their glaze colors are utterly different, they have a long-term, stable and mainly the same supply of raw material. The relation between ancient Jun Porcelain and ancient Ru Porcelain is also preliminarily analysed. It is found that only few modern Jun Porcelain samples are similar to ancient Jun Porcelain but the majority of them are different from ancient ones

Reconstructing an Ancient Wonder.

Science.gov (United States)

Imhof, Christopher J.

2001-01-01

Describes a Montessori class project involving the building of a model of the ancient Briton monument, Stonehenge. Illustrates how the flexibility of the Montessori elementary curriculum encourages children to make their own toys and learn from the process. (JPB)

Ceramic fiber-reinforced monoclinic celsian phase glass-ceramic matrix composite material

Science.gov (United States)

Bansal, Narottam P. (Inventor); Dicarlo, James A. (Inventor)

1994-01-01

A hyridopolysilazane-derived ceramic fiber reinforced monoclinic celsian phase barium aluminum silicate glass-ceramic matrix composite material is prepared by ball-milling an aqueous slurry of BAS glass powder and fine monoclinic celsian seeds. The fibers improve the mechanical strength and fracture toughness and with the matrix provide superior dielectric properties.

Evaluation of Monolithic Ceramics and Ceramic Thermal Barrier Coatings for Diesel Engine Applications

National Research Council Canada - National Science Library

Swab, Jeffrey J

2001-01-01

The Metals and Ceramics Research Branch (MCRB) of the Weapons and Materials Research Directorate is providing ceramic material characterization and evaluation to the Tank Automotive Research, Development, and Engineering Center (TARDEC...

Ceramics as nuclear reactor fuels

International Nuclear Information System (INIS)

Reeve, K.D.

1975-01-01

Ceramics are widely accepted as nuclear reactor fuel materials, for both metal clad ceramic and all-ceramic fuel designs. Metal clad UO 2 is used commercially in large tonnages in five different power reactor designs. UO 2 pellets are made by familiar ceramic techniques but in a reactor they undergo complex thermal and chemical changes which must be thoroughly understood. Metal clad uranium-plutonium dioxide is used in present day fast breeder reactors, but may eventually be replaced by uranium-plutonium carbide or nitride. All-ceramic fuels, which are necessary for reactors operating above about 750 0 C, must incorporate one or more fission product retentive ceramic coatings. BeO-coated BeO matrix dispersion fuels and silicate glaze coated UO 2 -SiO 2 have been studied for specialised applications, but the only commercial high temperature fuel is based on graphite in which small fuel particles, each coated with vapour deposited carbon and silicon carbide, are dispersed. Ceramists have much to contribute to many aspects of fuel science and technology. (author)

Method for Waterproofing Ceramic Materials

Science.gov (United States)

Cagliostro, Domenick E. (Inventor); Hsu, Ming-Ta S. (Inventor)

1998-01-01

Hygroscopic ceramic materials which are difficult to waterproof with a silane, substituted silane or silazane waterproofing agent, such as an alumina containing fibrous, flexible and porous, fibrous ceramic insulation used on a reentry space vehicle, are rendered easy to waterproof if the interior porous surface of the ceramic is first coated with a thin coating of silica. The silica coating is achieved by coating the interior surface of the ceramic with a silica precursor converting the precursor to silica either in-situ or by oxidative pyrolysis and then applying the waterproofing agent to the silica coated ceramic. The silica precursor comprises almost any suitable silicon containing material such as a silane, silicone, siloxane, silazane and the like applied by solution, vapor deposition and the like. If the waterproofing is removed by e.g., burning, the silica remains and the ceramic is easily rewaterproofed. An alumina containing TABI insulation which absorbs more that five times its weight of water, absorbs less than 10 wt. % water after being waterproofed according to the method of the invention.

Psychometric properties of the Albanian version of the Orofacial Esthetic Scale: OES-ALB.

Science.gov (United States)

Bimbashi, Venera; Čelebić, Asja; Staka, Gloria; Hoxha, Flurije; Peršić, Sanja; Petričević, Nikola

2015-08-26

The aim was to adapt the Orofacial Esthetic Scale (OES) and to test psychometric properties of the Albanian language version in the cultural environment of the Republic of Kosovo. The OES questionnaire was translated from the original English version according to the accepted techniques. The reliability (internal consistency), and validity (construct, convergent and discriminative) were tested in 169 subjects, test-retest in 61 dental students (DS), and responsiveness in 51 prosthodontic patients with treatment needs (PPTN). The corrected item correlation coefficients of OES-ALB ranged from 0.686 to 0.909. The inter-item correlation coefficient ranged between 0.572 and 0.919. The Cronbach's alpha was 0.961 and IIC 0.758. Test- retest was confirmed by good ICCs and by no significant differences of the OES scores through the period of 14 days without any orofacial changes (p > 0.05). Construct validity was proved by the presence of one-factor composition that assumed 79.079% of the variance. Convergent validity showed significant correlation between one general question about satisfaction with orofacial esthetics and the OES summary score, as well as between the sum of the 3 OHIP-ALB49 questions related to orofacial aesthetics and the OES summary score. Discriminative validity was confirmed with statistically significant differences between DS, prosthodontic patients without treatment need and PPTN (p < 0.01). Responsiveness was confirmed by a significant increase of OES scores after PPTN patients received new fixed partial or removable dentures (P < 0.001). The results proved excellent psychometric properties of the OES-ALB questionnaire in the Republic of Kosovo.

Mitogenomic analyses from ancient DNA

DEFF Research Database (Denmark)

Paijmans, Johanna L. A.; Gilbert, Tom; Hofreiter, Michael

2013-01-01

The analysis of ancient DNA is playing an increasingly important role in conservation genetic, phylogenetic and population genetic analyses, as it allows incorporating extinct species into DNA sequence trees and adds time depth to population genetics studies. For many years, these types of DNA...... analyses (whether using modern or ancient DNA) were largely restricted to the analysis of short fragments of the mitochondrial genome. However, due to many technological advances during the past decade, a growing number of studies have explored the power of complete mitochondrial genome sequences...... yielded major progress with regard to both the phylogenetic positions of extinct species, as well as resolving population genetics questions in both extinct and extant species....

An experimental bioactive dental ceramic for metal-ceramic restorations: Textural characteristics and investigation of the mechanical properties.

Science.gov (United States)

Goudouri, Ourania-Menti; Kontonasaki, Eleana; Papadopoulou, Lambrini; Manda, Marianthi; Kavouras, Panagiotis; Triantafyllidis, Konstantinos S; Stefanidou, Maria; Koidis, Petros; Paraskevopoulos, Konstantinos M

2017-02-01

The aim of this study was the evaluation of the textural characteristics of an experimental sol-gel derived feldspathic dental ceramic, which has already been proven bioactive and the investigation of its flexural strength through Weibull Statistical Analysis. The null hypothesis was that the flexural strength of the experimental and the commercial dental ceramic would be of the same order, resulting in a dental ceramic with apatite forming ability and adequate mechanical integrity. Although the flexural strength of the experimental ceramics was not statistically significant different compared to the commercial one, the amount of blind pores due to processing was greater. The textural characteristics of the experimental ceramic were in accordance with the standard low porosity levels reported for dental ceramics used for fixed prosthetic restorations. Feldspathic dental ceramics with typical textural characteristics and advanced mechanical properties as well as enhanced apatite forming ability can be synthesized through the sol-gel method. Copyright © 2016 Elsevier Ltd. All rights reserved.

Ceramic composites: Enabling aerospace materials

Science.gov (United States)

Levine, S. R.

1992-01-01

Ceramics and ceramic matrix composites (CMC) have the potential for significant impact on the performance of aerospace propulsion and power systems. In this paper, the potential benefits are discussed in broad qualitative terms and are illustrated by some specific application case studies. The key issues in need of resolution for the potential of ceramics to be realized are discussed.

Ancient Egypt in our Cultural Heritage?

Directory of Open Access Journals (Sweden)

Vera Vasiljević

2016-02-01

Full Text Available Inspiration derived from ancient Egypt is usually expressed through the Egyptian motifs in arts and popular culture of the 19th and 20th centuries, as well as through the non-scientific interpretations of the culture, very much based upon the Renaissance ones. The number and variety of material and non-material traces of this fascination are most expressed in the countries where, along with the early support for the institutional development of Egyptology, there existed economically potent educated middle classes (Western and Central Europe, USA, but may also be traced elsewhere. The public fascination by ancient Egypt has not ceased by the times of foundation of Egyptology, marked by the decipherment of the hieroglyphic script in 1822. Until the end of the 20th century Egyptologists have rarely dealt with the prelude to their discipline, limiting their interest to the critical approach to ancient sources and to noting the attempts to interpret the hieroglyphic script and the function of pyramids. However, the rising importance of the reception studies in other disciplines raised the interest of Egyptologists for the "fascination of Egypt", thus changing the status of various modes of expressing "Egyptomania" – they have thus become a part of the cultural heritage, registered, documented, preserved and studied. The research of this kind is only beginning in Serbia. The line of inquiry enhances the knowledge of the scope, manifestations and roles of the interest in Egypt, not limited by the national or political borders. On the other hand, the existence of the cultural heritage similar to the wider European view of ancient Egypt – short remarks by Jerotej Račanin, Kandor by Atanasije Stojković, the usage of architectural motifs derived from Egypt, the emergence of small private collections, to mention several early examples – all show that the research into the reception of ancient Egypt may contribute to the knowledge about the history

Albanian intellectuals’ opinion on the role of education in improving the position of women in society

Directory of Open Access Journals (Sweden)

Bahtije Gërbeshi Zylfiu

2016-11-01

Full Text Available Historical development of the position of women in human society pushes us to think that civilizations so far, have been very biased, because there have been made big differences between genders beings, male and female, respectively. These differences, as well as a$ empts to gender superiority are regarded as the main causes for the difficult position of women in society in different historical periods. In this context, historical sources indicate that the right approach to the issue of women has been given not only by women themselves, but also by men. These efforts to overcome gender problems have opened avenues for research and serious engagement opportunities for many scholars. Many scientists, sociologists, philosophers, psychologists and writers, the problem of women have studied from different aspects. Some of them express their beliefs that for the improvement of women's position in society, it is the role of Education. Main purpose of this paper is to present the opinions, beliefs and attitudes of some Albanian intellectuals regarding the role of education in improving the position of women in society. Also, we can say that, despite the overall social progress and economic growth, the key to improving the position of women in society was and remains education.

The rights of patients as consumers: An ancient view.

Science.gov (United States)

Barapatre, Nishant Bhimraj; Joglekar, Vishnu Prabhakar

2016-01-01

As far as the rights of consumers are concerned, the International Organization of Consumer's Union (IOCU) in 1983 has specified about the eight rights of a consumer. The Consumer Protection Act (CPA), 1986 then prescribed six "Rights of Consumers," which are protected under the act. However, these rights can be observed in the ancient Indian texts such as Brihat-trayee , Narad Smruti , and Kautilya Arthashastra ., in the form of rights given to patients. For the purpose of present study, the implemented methodology includes - (1) study of the consumer rights described by IOCU and CPA, (2) detailed review of literature for observance of replication of these consumer rights in the ancient Indian texts and (3) a comparative study of the present consumer rights with the rights of patients observed in ancient Indian texts. This study shows that the substance of consumer rights is not a recent evolution, but the foundation of these rights has been laid well beforehand in the ancient times, which were provided to the patients by medical profession as well as by the rulers. The current scenario of protection of consumer rights is the replication of this ancient practice only.

Ancient Human Parasites in Ethnic Chinese Populations.

Science.gov (United States)

Yeh, Hui-Yuan; Mitchell, Piers D

2016-10-01

Whilst archaeological evidence for many aspects of life in ancient China is well studied, there has been much less interest in ancient infectious diseases, such as intestinal parasites in past Chinese populations. Here, we bring together evidence from mummies, ancient latrines, and pelvic soil from burials, dating from the Neolithic Period to the Qing Dynasty, in order to better understand the health of the past inhabitants of China and the diseases endemic in the region. Seven species of intestinal parasite have been identified, namely roundworm, whipworm, Chinese liver fluke, oriental schistosome, pinworm, Taenia sp. tapeworm, and the intestinal fluke Fasciolopsis buski . It was found that in the past, roundworm, whipworm, and Chinese liver fluke appear to have been much more common than the other species. While roundworm and whipworm remained common into the late 20th century, Chinese liver fluke seems to have undergone a marked decline in its prevalence over time. The iconic transport route known as the Silk Road has been shown to have acted as a vector for the transmission of ancient diseases, highlighted by the discovery of Chinese liver fluke in a 2,000 year-old relay station in northwest China, 1,500 km outside its endemic range.

Evaluation of the reuse of glass and ceramic blocks in the development of a ceramic products

International Nuclear Information System (INIS)

Rodrigues, R.A.; Silva, L.A.; Martins, B.E.D.B.S.; Felippe, C.E.C.; Almeida, V.C.

2010-01-01

The ceramic industry has enormous potential to absorb wastes. The main objective of this study was to evaluate the feasibility of reusing leftovers ceramic blocks, from construction and, with shards of glass in the development of a ceramic product. The ceramic pieces were prepared with different compositions of glass by the method of pressing conformation and heating at 1000 and 1100 deg C. The conformed pieces were tested for linear shrinkage, water absorption, porosity, and tensile strength. The techniques for characterization were X-ray fluorescence, X-ray diffraction and scanning electron microscopy, the results show that the ceramic material produced has a high flexural strength and low values of water absorption. (author)

Non-destructive sampling of ancient insect DNA

DEFF Research Database (Denmark)

Thomsen, Philip Francis; Elias, Scott; Gilbert, Tom

2009-01-01

BACKGROUND: A major challenge for ancient DNA (aDNA) studies on insect remains is that sampling procedures involve at least partial destruction of the specimens. A recent extraction protocol reveals the possibility of obtaining DNA from past insect remains without causing visual morphological...... of 77-204 base pairs (-bp) in size using species-specific and general insect primers. CONCLUSION/SIGNIFICANCE: The applied non-destructive DNA extraction method shows promising potential on insect museum specimens of historical age as far back as AD 1820, but less so on the ancient permafrost......-preserved insect fossil remains tested, where DNA was obtained from samples up to ca. 26,000 years old. The non-frozen sediment DNA approach appears to have great potential for recording the former presence of insect taxa not normally preserved as macrofossils and opens new frontiers in research on ancient...

Applied investigation of Moessbauer effect for the famous ancient chinese porcelains

International Nuclear Information System (INIS)

Gao Zhengyao; Chen Songhua; Shen Zuocheng

1996-10-01

The famous Ru porcelain, Jun porcelain and Guan porcelain of Song Dynasty and Yuan Dynasty are analyzed. The Moessbauer parameters of the ancient porcelains and the imitative ancient porcelains are compared. The firing techniques, coloring mechanism and microstructures of the ancient Chinese porcelains have been discussed. (7 figs., 4 tabs.)

Ancient Chinese literature reveals pathways of eggplant domestication.

Science.gov (United States)

Wang, Jin-Xiu; Gao, Tian-Gang; Knapp, Sandra

2008-12-01

Changes in key traits occurring during the processes of plant domestication have long been subjects of debate. Only in the case of genetic analysis or with extensive plant remains can specific sets of changes be documented. Historical details of the plant domestication processes are rare and other evidence of morphological change can be difficult to obtain, especially for those vegetables that lack a substantial body of archaeological data. Botanical records chronicled in the ancient literature of established ancient civilizations, such as that of China, are invaluable resources for the study and understanding of the process of plant domestication. Here, the considerable body of ancient Chinese literature is used to explore the domestication process that has occurred with the eggplant (Solanum melongena), an important vegetable in Old World. Information about eggplant domestication in the ancient Chinese literature was retrieved using a variety of methods. The information obtained was then sorted by taxon, examined and taxonomic identifications verified. It was found that the earliest record of the eggplant documented in ancient Chinese literature was in a work from 59 bc. As far as is known, this is the earliest reliable and accurately dated record of eggplant in cultivation. The analysis reveals that the process of domestication of the eggplant in China involved three principal aspects of fruit quality: size, shape and taste. These traits were actively and gradually selected; fruit size changed from small to large, taste changed from not palatable to what was termed at the time sweetish, and that over time, a wider variety of fruit shapes was cultivated. The results indicate that, in addition to data gleaned from archaeology and genetics, evidence as to changes in key traits occurring during the process of plant domestication and selective forces responsible for these changes can be traced through the ancient literature in some civilizations.

Fatigue failure load of two resin-bonded zirconia-reinforced lithium silicate glass-ceramics: Effect of ceramic thickness.

Science.gov (United States)

Monteiro, Jaiane Bandoli; Riquieri, Hilton; Prochnow, Catina; Guilardi, Luís Felipe; Pereira, Gabriel Kalil Rocha; Borges, Alexandre Luiz Souto; de Melo, Renata Marques; Valandro, Luiz Felipe

2018-06-01

To evaluate the effect of ceramic thickness on the fatigue failure load of two zirconia-reinforced lithium silicate (ZLS) glass-ceramics, adhesively cemented to a dentin analogue material. Disc-shaped specimens were allocated into 8 groups (n=25) considering two study factors: ZLS ceramic type (Vita Suprinity - VS; and Celtra Duo - CD), and ceramic thickness (1.0; 1.5; 2.0; and 2.5mm). A trilayer assembly (ϕ=10mm; thickness=3.5mm) was designed to mimic a bonded monolithic restoration. The ceramic discs were etched, silanized and luted (Variolink N) into a dentin analogue material. Fatigue failure load was determined using the Staircase method (100,000 cycles at 20Hz; initial fatigue load ∼60% of the mean monotonic load-to-failure; step size ∼5% of the initial fatigue load). A stainless-steel piston (ϕ=40mm) applied the load into the center of the specimens submerged in water. Fractographic analysis and Finite Element Analysis (FEA) were also performed. The ceramic thickness influenced the fatigue failure load for both ZLS materials: Suprinity (716N up to 1119N); Celtra (404N up to 1126N). FEA showed that decreasing ceramic thickness led to higher stress concentration on the cementing interface. Different ZLS glass-ceramic thicknesses influenced the fatigue failure load of the bonded system (i.e. the thicker the glass ceramic is, the higher the fatigue failure load will be). Different microstructures of the ZLS glass-ceramics might affect the fatigue behavior. FEA showed that the thicker the glass ceramic is, the lower the stress concentration at the tensile surface will be. Copyright © 2018 The Academy of Dental Materials. Published by Elsevier Inc. All rights reserved.

Notions of "Rhetoric as Epistemic" in Ancient Greece.

Science.gov (United States)

Benoit, William L.

The notion that rhetoric (and to a lesser extent, argument) is epistemic is an increasingly popular one today, although it can be traced to ancient Greece. The notion holds that rhetoric, or the art of persuasion, creates and shapes knowledge. Two ancient authors--Aristophanes and Plato--provide evidence that others had notions of rhetoric as…

Ferroelastic ceramic-reinforced metal matrix composites

OpenAIRE

2006-01-01

Composite materials comprising ferroelastic ceramic particulates dispersed in a metal matrix are capable of vibration damping. When the ferroelastic ceramic particulates are subjected to stress, such as the cyclic stress experienced during vibration of the material, internal stresses in the ceramic cause the material to deform via twinning, domain rotation or domain motion thereby dissipating the vibrational energy. The ferroelastic ceramic particulates may also act as reinforcements to impro...

Development of advanced ceramics at AECL

International Nuclear Information System (INIS)

Palmer, B.J.F.; MacEwen, S.R.; Sawicka, B.D.; Hayward, P.J.; Sridhar, S.

1986-12-01

Atomic Energy of Canada Limited (AECL) has a long history of developing ceramics for nuclear fission and fusion applications. AECL is now applying its multidisciplinary materials R and D capabilities, including unique capabilities in ceramic processing and nondestructive evaluation, to develop advanced ceramic materials for commercial and industrial applications. This report provides an overview of the facilities and programs associated with the development of advanced ceramics at AECL

Payout phase in DC pension funds – policy option - Theoretical considerations and Albanian available options

Directory of Open Access Journals (Sweden)

Enkeleda Shehi

2015-11-01

Full Text Available The aim of this paper is to provide a brief overview of the third pillar of pensions in Albania and what are the different alternatives related to the payout. Referring to the actual development of this market in Albania, experience of the actors involved, I find it indispensable and necessary to provide some theoretical background and considerations, and then build up a simple model of projection of a pension scheme cost and a model for payout alternatives for the Albanian pension funds. A great deal of importance is shown towards posing the assumptions. Also, the paper gives an explanation about the differences among different payout options and suggests the best option for the existing pension funds in Albania. The best option represents my conclusion and recommendation for the actual third pillar of pensions and the others that might join latter. To sum up, the first conclusion of the paper is that the annuity option is the best alternative for the payout phase of the pensions. It has the advantage of providing the highest protection against the risk of longevity. The second conclusion is that based on other countries experiences, the annuity market have to be developed hand in hand with the pension system development. Therefore Albania should rely on and follow this experience.

Surgical history of ancient China: Part 2.

Science.gov (United States)

Fu, Louis

2010-03-01

In this second part of ancient Chinese surgical history, the practice of bone setting in China began around 3000 years ago. Throughout this period, significant progress was made, some highlights of which are cited. These methods, comparable with Western orthopaedic technique, are still being practised today. In conclusion, the possible reasons for the lack of advancement in operative surgery are discussed, within context of the cultural, social and religious background of ancient China.

Social Norms in the Ancient Athenian Courts

OpenAIRE

Lanni, Adriaan M.

2013-01-01

Ancient Athens was a remarkably peaceful and well-ordered society by both ancient and contemporary standards. Scholars typically attribute Athens’ success to internalized norms and purely informal enforcement mechanisms. This article argues that the formal Athenian court system played a vital role in maintaining order by enforcing informal norms. This peculiar approach to norm enforcement compensated for apparent weaknesses in the state system of coercion. It mitigated the effects of under-e...

Musical ensembles in Ancient Mesapotamia

NARCIS (Netherlands)

Krispijn, T.J.H.; Dumbrill, R.; Finkel, I.

2010-01-01

Identification of musical instruments from ancient Mesopotamia by comparing musical ensembles attested in Sumerian and Akkadian texts with depicted ensembles. Lexicographical contributions to the Sumerian and Akkadian lexicon.

Strategies for fracture toughness, strength and reliability optimisation of ceramic-ceramic laminates

Czech Academy of Sciences Publication Activity Database

Šestáková, L.; Bermejo, R.; Chlup, Zdeněk; Danzer, R.

2011-01-01

Roč. 102, č. 6 (2011), s. 613-626 ISSN 1862-5282 Institutional research plan: CEZ:AV0Z20410507 Keywords : Ceramic laminates * Layered ceramics * Residual stress * Fracture toughness * Threshold strength Subject RIV: JL - Materials Fatigue, Friction Mechanics Impact factor: 0.830, year: 2011

history repeats itself : saddam and the ancient mesopotamian royal

African Journals Online (AJOL)

harkhu

ancient Mesopotamia (present day Iraq)2, from the fourth millennium3 until its incorporation into the ..... aspects of Mesopotamian culture that could not be separated from the other. Saddam, on the ..... site of ancient Babylon. Large parts of the ...

Aerospace Ceramic Materials: Thermal, Environmental Barrier Coatings and SiC/SiC Ceramic Matrix Composites for Turbine Engine Applications

Science.gov (United States)

Zhu, Dongming

2018-01-01

Ceramic materials play increasingly important roles in aerospace applications because ceramics have unique properties, including high temperature capability, high stiffness and strengths, excellent oxidation and corrosion resistance. Ceramic materials also generally have lower densities as compared to metallic materials, making them excellent candidates for light-weight hot-section components of aircraft turbine engines, rocket exhaust nozzles, and thermal protection systems for space vehicles when they are being used for high-temperature and ultra-high temperature ceramics applications. Ceramic matrix composites (CMCs), including non-oxide and oxide CMCs, are also recently being incorporated in gas turbine engines for high pressure and high temperature section components and exhaust nozzles. However, the complexity and variability of aerospace ceramic processing methods, compositions and microstructures, the relatively low fracture toughness of the ceramic materials, still remain the challenging factors for ceramic component design, validation, life prediction, and thus broader applications. This ceramic material section paper presents an overview of aerospace ceramic materials and their characteristics. A particular emphasis has been placed on high technology level (TRL) enabling ceramic systems, that is, turbine engine thermal and environmental barrier coating systems and non-oxide type SiC/SiC CMCs. The current status and future trend of thermal and environmental barrier coatings and SiC/SiC CMC development and applications are described.

Review of glass ceramic waste forms

International Nuclear Information System (INIS)

Rusin, J.M.

1981-01-01

Glass ceramics are being considered for the immobilization of nuclear wastes to obtain a waste form with improved properties relative to glasses. Improved impact resistance, decreased thermal expansion, and increased leach resistance are possible. In addition to improved properties, the spontaneous devitrification exhibited in some waste-containing glasses can be avoided by the controlled crystallization after melting in the glass-ceramic process. The majority of the glass-ceramic development for nuclear wastes has been conducted at the Hahn-Meitner Institute (HMI) in Germany. Two of their products, a celsian-based (BaAl 3 Si 2 O 8 ) and a fresnoite-based (Ba 2 TiSi 2 O 8 ) glass ceramic, have been studied at Pacific Northwest Laboratory (PNL). A basalt-based glass ceramic primarily containing diopsidic augite (CaMgSi 2 O 6 ) has been developed at PNL. This glass ceramic is of interest since it would be in near equilibrium with a basalt repository. Studies at the Power Reactor and Nuclear Fuel Development Corporation (PNC) in Japan have favored a glass-ceramic product based upon diopside (CaMgSi 2 O 6 ). Compositions, processing conditions, and product characterization of typical commercial and nuclear waste glass ceramics are discussed. In general, glass-ceramic waste forms can offer improved strength and decreased thermal expansion. Due to typcially large residual glass phases of up to 50%, there may be little improvement in leach resistance

Design and In-Situ Processing of Metal-Ceramic and Ceramic-Ceramic Microstructures

National Research Council Canada - National Science Library

Sass, Stephen

1997-01-01

.... Metal-ceramic microstructures have been synthesized in situ by a variety of novel processing techniques, including the partial reduction of oxide compounds and displacement reactions and sol-gel...

Microcracking in ceramics and acoustic emission

International Nuclear Information System (INIS)

Subbarao, E.C.

1991-01-01

One of the limitations in the use of ceramics in critical applications is due to the presence of microcracks, which may arise from differential thermal expansion and phase changes, among others. Acoustic emission signals occur when there are abrupt microdeformations in a material and thus offer a convenient means of non-destructive detection of microcracking. Examples of a study of acoustic emission from microcracking due to anisotropic thermal expansion in low thermal expansion single phase ceramics such as niobia and sodium zirconium phosphate ceramics and due to phase changes in zirconia and superconducting YBa 2 Cu 3 Osub(7-x) ceramics are presented, together with the case of lead titanate ceramics, which exhibits both a phase change (paraelectric to ferroelectric) and an anisotropic thermal expansion. The role of grain size on the extent of microcracking is illustrated in the case of niobia ceramics. Some indirect evidence of healing of microcracks on heating niobia and lead titanate ceramics is presented from the acoustic emission results. (author). 69 refs., 9 figs

Translucency of dental ceramics with different thicknesses.

Science.gov (United States)

Wang, Fu; Takahashi, Hidekazu; Iwasaki, Naohiko

2013-07-01

The increased use of esthetic restorations requires an improved understanding of the translucent characteristics of ceramic materials. Ceramic translucency has been considered to be dependent on composition and thickness, but less information is available about the translucent characteristics of these materials, especially at different thicknesses. The purpose of this study was to investigate the relationship between translucency and the thickness of different dental ceramics. Six disk-shaped specimens of 8 glass ceramics (IPS e.max Press HO, MO, LT, HT, IPS e.max CAD LT, MO, AvanteZ Dentin, and Trans) and 5 specimens of 5 zirconia ceramics (Cercon Base, Zenotec Zr Bridge, Lava Standard, Lava Standard FS3, and Lava Plus High Translucency) were prepared following the manufacturers' instructions and ground to a predetermined thickness with a grinding machine. A spectrophotometer was used to measure the translucency parameters (TP) of the glass ceramics, which ranged from 2.0 to 0.6 mm, and of the zirconia ceramics, which ranged from 1.0 to 0.4 mm. The relationship between the thickness and TP of each material was evaluated using a regression analysis (α=.05). The TP values of the glass ceramics ranged from 2.2 to 25.3 and the zirconia ceramics from 5.5 to 15.1. There was an increase in the TP with a decrease in thickness, but the amount of change was material dependent. An exponential relationship with statistical significance (Pceramics and zirconia ceramics. The translucency of dental ceramics was significantly influenced by both material and thickness. The translucency of all materials increased exponentially as the thickness decreased. All of the zirconia ceramics evaluated in the present study showed some degree of translucency, which was less sensitive to thickness compared to that of the glass ceramics. Copyright © 2013 The Editorial Council of the Journal of Prosthetic Dentistry. Published by Mosby, Inc. All rights reserved.

Microstructural characterization of ceramic floor tiles with the incorporation of wastes from ceramic tile industries

Directory of Open Access Journals (Sweden)

Carmeane Effting

2010-09-01

Full Text Available Ceramic floor tiles are widely used in buildings. In places where people are bare feet, the thermal sensation of cold or hot depends on the environmental conditions and material properties including its microstructure and crustiness surface. The introduction of the crustiness surface on the ceramic floor tiles interfere in the contact temperature and also it can be an strategy to obtain ceramic tiles more comfortable. In this work, porous ceramic tiles were obtained by pressing an industrial atomized ceramic powder incorporated with refractory raw material (residue from porcelainized stoneware tile polishing and changing firing temperature. Raw materials and obtained compacted samples were evaluated by chemical analysis, scanning electron microscopy (SEM, energy-dispersive spectrometry (EDS, thermogravimetric analysis (TGA, and differential thermal analysis (DTA. Thermal (thermal conductivity and effusivity and physical (porosity measurements were also evaluated.

Health benefits of ancient grains. Comparison among bread made with ancient, heritage and modern grain flours in human cultured cells.

Science.gov (United States)

Valli, Veronica; Taccari, Annalisa; Di Nunzio, Mattia; Danesi, Francesca; Bordoni, Alessandra

2018-05-01

Nowadays the higher nutritional value of whole grains compared to refined grains is recognized. In the last decade, there has been a renewed interest in the ancient wheat varieties for producing high-value food products with enhanced health benefits. This study compared two ancient grains, two heritage grains, and four modern grains grown in the same agronomic conditions considering not only their chemical characteristics, but also their biological effects. Whole grain flours were obtained and used to make bread. Bread was in vitro digested, the digesta were supplemented to HepG2 cells, and the biological effects of supplementation were evaluated. In addition, cells previously supplemented with the different digested bread types were then exposed to inflammatory agents to evidence possible protective effects of the pre-treatments. Despite the impossibility to discriminate bread made with different grains based on their chemical composition, results herein reported evidence that their supplementation to cultured cells exerts different effects, confirming the potential health benefits of ancient grains. This research represents an advancement for the evaluation of the apparent positive effects of ancient grains and the formulation of cereal-based products with added nutritional value. Copyright © 2018 Elsevier Ltd. All rights reserved.

Low thermal expansion glass ceramics

CERN Document Server

1995-01-01

This book is one of a series reporting on international research and development activities conducted by the Schott group of companies With the series, Schott aims to provide an overview of its activities for scientists, engineers, and managers from all branches of industry worldwide where glasses and glass ceramics are of interest Each volume begins with a chapter providing a general idea of the current problems, results, and trends relating to the subjects treated This volume describes the fundamental principles, the manufacturing process, and applications of low thermal expansion glass ceramics The composition, structure, and stability of polycrystalline materials having a low thermal expansion are described, and it is shown how low thermal expansion glass ceramics can be manufactured from appropriately chosen glass compositions Examples illustrate the formation of this type of glass ceramic by utilizing normal production processes together with controlled crystallization Thus glass ceramics with thermal c...

Dating ancient Chinese celadon porcelain by neutron activation analysis and bayesian classification

International Nuclear Information System (INIS)

Xie Guoxi; Feng Songlin; Feng Xiangqian; Zhu Jihao; Yan Lingtong; Li Li

2009-01-01

Dating ancient Chinese porcelain is one of the most important and difficult problems in porcelain archaeological field. Eighteen elements in bodies of ancient celadon porcelains fired in Southern Song to Yuan period (AD 1127-1368) and Ming dynasty (AD 1368-1644), including La, Sm, U, Ce, etc., were determined by neutron activation analysis (NAA). After the outliers of experimental data were excluded and multivariate normal distribution was tested, and Bayesian classification was used for dating of 165 ancient celadon porcelain samples. The results show that 98.2% of total ancient celadon porcelain samples are classified correctly. It means that NAA and Bayesian classification are very useful for dating ancient porcelain. (authors)

Second-harmonic generation imaging of collagen in ancient bone.

Science.gov (United States)

Thomas, B; McIntosh, D; Fildes, T; Smith, L; Hargrave, F; Islam, M; Thompson, T; Layfield, R; Scott, D; Shaw, B; Burrell, C L; Gonzalez, S; Taylor, S

2017-12-01

Second-harmonic generation imaging (SHG) captures triple helical collagen molecules near tissue surfaces. Biomedical research routinely utilizes various imaging software packages to quantify SHG signals for collagen content and distribution estimates in modern tissue samples including bone. For the first time using SHG, samples of modern, medieval, and ice age bones were imaged to test the applicability of SHG to ancient bone from a variety of ages, settings, and taxa. Four independent techniques including Raman spectroscopy, FTIR spectroscopy, radiocarbon dating protocols, and mass spectrometry-based protein sequencing, confirm the presence of protein, consistent with the hypothesis that SHG imaging detects ancient bone collagen. These results suggest that future studies have the potential to use SHG imaging to provide new insights into the composition of ancient bone, to characterize ancient bone disorders, to investigate collagen preservation within and between various taxa, and to monitor collagen decay regimes in different depositional environments.

Experimental study on the penetration effect of ceramics composite projectile on ceramic / A3 steel compound targets

Directory of Open Access Journals (Sweden)

Di-qi Hu

2017-08-01

Full Text Available In order to improve the penetration of projectiles into ceramic composite armors, the nose of 30 mm standard projectile was replaced by a toughened ceramic nose, and the performance of ceramic-nose projectiles penetrating into ceramic/A3 steel composite targets has been experimentally researched. According to impact dynamics theory,, the performances of 30 mm ceramic-nose projectile and 30 mm standard projectile penetrating into the ceramic/A3 steel composite targets were analyzed and compared using DOP method, especially focusing on the effects made by different nose structures and materials. The aperture and depth of perforation of projectile into the armor plates as well as the residual mass of bullet core under the same conditions were comparatively analyzed. A numerical simulation was built and computed by ANSYS/LS-DYNA. Based on the simulated results, the penetration performance was further analyzed in terms of the residual mass of bullet core. The results show that the ceramic nose has a great effect on the protection of bullet core.

Ancient ports of Kalinga

Digital Repository Service at National Institute of Oceanography (India)

Tripati, S.

which plied between Kalinga and south east Asian countries. Nanda Raja, is said to have attacked Kalinga with the intention of getting access to the sea for the landlocked Kingdom of Magadha (Bihar). The ancient texa Artha Sastra (3rd-4th century B...

Ancient Greek in modern language of medicine

OpenAIRE

Marković Vera

2007-01-01

In order to standardize language of medicine, it is essential to have a good command of ancient Greek and Latin. We cannot deny a huge impact of ancient Greek medicine on medical terminology. Compounds of Greek origin related to terms for organs, illnesses, inflammations, surgical procedures etc. have been listed as examples. They contain Greek prefixes and suffixes transcribed into Latin and they have been analyzed. It may be concluded that the modern language of medicine basically represent...

From ancient Greek Logos to European rationality

OpenAIRE

APOSTOLOPOULOU GEORGIA

2016-01-01

Because of history, culture, and politics, European identity has its archetypical elements in ancient Greek culture. Ancient Greek philosophy brought Logos to fore and defined it as the crucial problem and the postulate of the human. We translate the Greek term Logos in English as reason or rationality. These terms, however, do not cover the semantic field of Logos since this includes, among other things, order of being, ground, language, argument etc. The juxtaposition of Logos (reason) to m...

ADM guidance-Ceramics: all-ceramic multilayer interfaces in dentistry.

Science.gov (United States)

Lohbauer, Ulrich; Scherrer, Susanne S; Della Bona, Alvaro; Tholey, Michael; van Noort, Richard; Vichi, Alessandro; Kelly, J Robert; Cesar, Paulo F

2017-06-01

This guidance document describes the specific issues involved in dental multilayer ceramic systems. The material interactions with regard to specific thermal and mechanical properties are reviewed and the characteristics of dental tooth-shaped processing parameters (sintering, geometry, thickness ratio, etc.) are discussed. Several techniques for the measurement of bond quality and residual stresses are presented with a detailed discussion of advantages and disadvantages. In essence no single technique is able to describe adequately the all-ceramic interface. Invasive or semi-invasive methods have been shown to distort the information regarding the residual stress state while non-invasive methods are limited due to resolution, field of focus or working depth. This guidance document has endeavored to provide a scientific basis for future research aimed at characterizing the ceramic interface of dental restorations. Along with the methodological discussion it is seeking to provide an introduction and guidance to relatively inexperienced researchers. Copyright © 2017 The Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Exoelectron emission from magnesium borate glass ceramics

International Nuclear Information System (INIS)

Kawamoto, Takamichi; Yanagisawa, Hideo; Nakamichi, Hiroshi; Kikuchi, Riichi; Kawanishi, Masaharu.

1986-01-01

Thermally stimulated exoelectron emission (TSEE) of a magnesium borate glass ceramics was investigated for its application to dosemetric use. It has been found that the TSEE glow patterns of the magnesium borate glass ceramics as well as a Li 2 B 4 O 7 glass ceramics depend on the kind of the radiation used and that the heat resistance of the magnesium borate glass ceramics is higher than that of the Li 2 B 4 O 7 glass ceramics. Therefore, the TSEE glow patterns of the magnesium borate glass ceramics indicate a possibility to be used as the dose measurement for each kind of radiation in the mixed radiation field. (author)

Manufacturing of superconductive silver/ceramic composites

DEFF Research Database (Denmark)

Seifi, Behrouz; Bech, Jakob Ilsted; Eriksen, Morten

2000-01-01

Manufacturing of superconducting metal/ceramic composites is a rather new discipline within materials forming processes. High Temperature SuperConductors, HTSC, are manufactured applying the Oxide-Powder-In-Tube process, OPIT. A ceramic powder containing lead, calcium, bismuth, strontium, and cop......Manufacturing of superconducting metal/ceramic composites is a rather new discipline within materials forming processes. High Temperature SuperConductors, HTSC, are manufactured applying the Oxide-Powder-In-Tube process, OPIT. A ceramic powder containing lead, calcium, bismuth, strontium...

Improving the strength of ceramics by controlling the interparticle forces and rheology of the ceramic suspensions

International Nuclear Information System (INIS)

Chou, Yi-Ping

2001-01-01

This thesis describes a study of the modification of the interparticle forces of colloidal ceramic particles in aqueous suspensions in order to improve the microstructural homogeneity, and hence the reliability and mechanical performances, of subsequently formed ceramic compacts. A concentrated stable fine ceramic powder suspension has been shown to be able to generate a higher density of a ceramic product with better mechanical, and also electrical, electrochemical and optical, properties of the ceramic body. This is because in a colloidally stable suspension there are no aggregates and so defect formation, which is responsible for the ceramic body performance below its theoretical maximum, is reduced. In order to achieve this, it is necessary to form a well dispersed ceramic suspension by ensuring the interparticle forces between the particles are repulsive, with as a high a loading with particles as possible. By examining the rheological behaviour and the results of Atomic Force Microscope, the dispersion state of the suspensions and hence the interparticle forces can be analysed. In this study, concentrated ceramic suspensions were made from two kinds of zirconia powders, monoclinic (DK1) and yttria partially stabilised (HSY3) zirconia, in the presence of a dispersant, 4,5-dihydroxy-1,3-benzenedisulfonic acid disodium salt (Tiron), in aqueous system. The optimum dispersant concentrations, where the viscosity and rheological moduli are the entire minimum, for DK1 and HSY3 suspensions, respectively, are 0.625% and 0.1%. The modifications of the interparticle forces were also achieved by pH adjustment and it was found that both of the suspensions at the optimum dispersant concentration were stable over the pH range 7 ∼ 10, which coincide with the results of the electrophoretic mobility measurements. Ceramic compacts have then been made by slip casting the suspensions of different dispersant concentration, followed by firing procedure. Mechanical properties of

Ceramic on ceramic arthroplasty of the hip: new materials confirm appropriate use in young patients.

Science.gov (United States)

Sentuerk, U; von Roth, P; Perka, C

2016-01-01

The leading indication for revision total hip arthroplasty (THA) remains aseptic loosening owing to wear. The younger, more active patients currently undergoing THA present unprecedented demands on the bearings. Ceramic-on-ceramic (CoC) bearings have consistently shown the lowest rates of wear. The recent advances, especially involving alumina/zirconia composite ceramic, have led to substantial improvements and good results in vitro. Alumina/zirconia composite ceramics are extremely hard, scratch resistant and biocompatible. They offer a low co-efficient of friction and superior lubrication and lower rates of wear compared with other bearings. The major disadvantage is the risk of fracture of the ceramic. The new composite ceramic has reduced the risk of fracture of the femoral head to 0.002%. The risk of fracture of the liner is slightly higher (0.02%). Assuming that the components are introduced without impingement, CoC bearings have major advantages over other bearings. Owing to the superior hardness, they produce less third body wear and are less vulnerable to intra-operative damage. The improved tribology means that CoC bearings are an excellent choice for young, active patients requiring THA. ©2016 The British Editorial Society of Bone & Joint Surgery.

Ancient analogues concerning stability and durability of cementitious wasteform

International Nuclear Information System (INIS)

Jiang, W.; Roy, D.M.

1994-01-01

The history of cementitious materials goes back to ancient times. The Greeks and Romans used calcined limestone and later developed pozzolanic cement by grinding together lime and volcanic ash called open-quotes pozzolanclose quotes which was first found near Port Pozzuoli, Italy. The ancient Chinese used lime-pozzolanic mixes to build the Great Wall. The ancient Egyptians used calcined impure gypsum to build the Great Pyramid of Cheops. The extraordinary stability and durability of these materials has impressed us, when so much dramatically damaged infrastructure restored by using modern portland cement now requires rebuilding. Stability and durability of cementitious materials have attracted intensive research interest and contractors' concerns, as does immobilization of radioactive and hazardous industrial waste in cementitious materials. Nuclear waste pollution of the environment and an acceptable solution for waste management and disposal constitute among the most important public concerns. The analogy of ancient cementitious materials to modern Portland cement could give us some clues to study their stability and durability. This present study examines selected results of studies of ancient building materials from France, Italy, China, and Egypt, combined with knowledge obtained from the behavior of modern portland cement to evaluate the potential for stability and durability of such materials in nuclear waste forms

Dense ceramic articles

International Nuclear Information System (INIS)

Cockbain, A.G.

1976-01-01

A method is described for the manufacture of articles of substantially pure dense ceramic materials, for use in severe environments. Si N is very suitable for use in such environments, but suffers from the disadvantage that it is not amenable to sintering. Some disadvantages of the methods normally used for making articles of Si N are mentioned. The method described comprises mixing a powder of the substantially pure ceramic material with an additive that promotes densification, and which is capable of nuclear transmutation into a gas when exposed to radiation, and hot pressing the mixture to form a billet. The billet is then irradiated to convert the additive into a gas which is held captive in the billet, and it is then subjected to a hot forging operation, during which the captive gas escapes and an article of substantially pure dense ceramic material is forged. The method is intended primarily for use for Si N, but may be applied to other ceramic materials. The additive may be Li or Be or their compounds, to the extent of at least 5 ppm and not more than 5% by weight. Irradiation is effected by proton or neutron bombardment. (UK)

Development of Advanced Ceramic Manufacturing Technology; FINAL

International Nuclear Information System (INIS)

Pujari, V.K.

2001-01-01

Advanced structural ceramics are enabling materials for new transportation engine systems that have the potential for significantly reducing energy consumption and pollution in automobiles and heavy vehicles. Ceramic component reliability and performance have been demonstrated in previous U.S. DOE initiatives, but high manufacturing cost was recognized as a major barrier to commercialization. Norton Advanced Ceramics (NAC), a division of Saint-Gobain Industrial Ceramics, Inc. (SGIC), was selected to perform a major Advanced Ceramics Manufacturing Technology (ACMT) Program. The overall objectives of NAC's program were to design, develop, and demonstrate advanced manufacturing technology for the production of ceramic exhaust valves for diesel engines. The specific objectives were (1) to reduce the manufacturing cost by an order of magnitude, (2) to develop and demonstrate process capability and reproducibility, and (3) to validate ceramic valve performance, durability, and reliability. I n order to achieve these objectives, NAC, a leading U.S. advanced ceramics component manufacturer, assembled a multidisciplinary, vertically integrated team. This team included: a major diesel engine builder, Detroit Diesel Corporation (DDC); a corporate ceramics research division, SGIC's Northboro R and D Center; intelligent processing system developers, BDM Federal/MATSYS; a furnace equipment company, Centorr/Vacuum Industries; a sintering expert, Wittmer Consultants; a production OEM, Deco-Grand; a wheel manufacturer and grinding operation developer, Norton Company's Higgins Grinding Technology Center (HGTC); a ceramic machine shop, Chand Kare Technical Ceramics; and a manufacturing cost consultant, IBIS Associates. The program was divided into four major tasks: Component Design and Specification, Component Manufacturing Technology Development, Inspection and Testing, and Process Demonstration

Setting the stage - building and working in an ancient DNA laboratory.

Science.gov (United States)

Knapp, Michael; Clarke, Andrew C; Horsburgh, K Ann; Matisoo-Smith, Elizabeth A

2012-01-20

With the introduction of next generation high throughput sequencing in 2005 and the resulting revolution in genetics, ancient DNA research has rapidly developed from an interesting but marginal field within evolutionary biology into one that can contribute significantly to our understanding of evolution in general and the development of our own species in particular. While the amount of sequence data available from ancient human, other animal and plant remains has increased dramatically over the past five years, some key limitations of ancient DNA research remain. Most notably, reduction of contamination and the authentication of results are of utmost importance. A number of studies have addressed different aspects of sampling, DNA extraction and DNA manipulation in order to establish protocols that most efficiently generate reproducible and authentic results. As increasing numbers of researchers from different backgrounds become interested in using ancient DNA technology to address key questions, the need for practical guidelines on how to construct and use an ancient DNA facility arises. The aim of this article is therefore to provide practical tips for building a state-of-the-art ancient DNA facility. It is intended to help researchers new to the field of ancient DNA research generally, and those considering the application of next generation sequencing, in their planning process. Copyright © 2011 Elsevier GmbH. All rights reserved.

Emerging Ceramic-based Materials for Dentistry

Science.gov (United States)

Denry, I.; Kelly, J.R.

2014-01-01

Our goal is to give an overview of a selection of emerging ceramics and issues for dental or biomedical applications, with emphasis on specific challenges associated with full-contour zirconia ceramics, and a brief synopsis on new machinable glass-ceramics and ceramic-based interpenetrating phase composites. Selected fabrication techniques relevant to dental or biomedical applications such as microwave sintering, spark plasma sintering, and additive manufacturing are also reviewed. Where appropriate, the authors have added their opinions and guidance. PMID:25274751

The provenance study of Chinese ancient architectonical colored glaze by INAA

International Nuclear Information System (INIS)

Cheng Lin; Feng Songlin; Li Rongwu; Lue Zhirong; Li Guoxia

2008-01-01

The colored glazes are very popular and famous in Chinese ancient architectures. In order to exactly locate the provenance of ancient architectonical colored glazes, 196 pieces of ancient colored glaze bodies and porcelain bodies fired in Xiyue Temple and Lidipo kiln are analyzed by INAA. The results of factor analysis and some archaeological questions are reported and discussed in this paper

The provenance study of Chinese ancient architectonical colored glaze by INAA

Energy Technology Data Exchange (ETDEWEB)

Cheng Lin [Key Laboratory of Beam Technology and Material Modification of Ministry of Education, College of Nuclear Science and Technology, Beijing Radiation Center, Beijing Normal University, Beijing 100875 (China); Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China)], E-mail: chenglin@bnu.edu.cn; Feng Songlin [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Li Rongwu [Department of Physics, Beijing Normal University, Beijing 100049 (China); Lue Zhirong [Shan' xi Provincial Institute of Cultural Relics and Archaeology, Xi' an 710054 (China); Li Guoxia [Institute of Physical Engineering, Zhengzhou University, Zhengzhou 450052 (China)

2008-12-15

The colored glazes are very popular and famous in Chinese ancient architectures. In order to exactly locate the provenance of ancient architectonical colored glazes, 196 pieces of ancient colored glaze bodies and porcelain bodies fired in Xiyue Temple and Lidipo kiln are analyzed by INAA. The results of factor analysis and some archaeological questions are reported and discussed in this paper.

Resurrecting ancient animal genomes: the extinct moa and more.

Science.gov (United States)

Huynen, Leon; Millar, Craig D; Lambert, David M

2012-08-01

Recently two developments have had a major impact on the field of ancient DNA (aDNA). First, new advances in DNA sequencing, in combination with improved capture/enrichment methods, have resulted in the recovery of orders of magnitude more DNA sequence data from ancient animals. Second, there has been an increase in the range of tissue types employed in aDNA. Hair in particular has proven to be very successful as a source of DNA because of its low levels of contamination and high level of ancient endogenous DNA. These developments have resulted in significant advances in our understanding of recently extinct animals: namely their evolutionary relationships, physiology, and even behaviour. Hair has been used to recover the first complete ancient nuclear genome, that of the extinct woolly mammoth, which then facilitated the expression and functional analysis of haemoglobins. Finally, we speculate on the consequences of these developments for the possibility of recreating extinct animals. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

PIXE study on ancient pottery from Chinese Shanghai area

International Nuclear Information System (INIS)

Cheng, H.S.; Zhang, Z.Q.; Song, J.; Gao, M.H.; Zhu, D.; Lin, J.W.; Feng, S.L.

2006-01-01

Shanghai is the largest city in China, and it also has a very long history. Archaeologists have found that six thousand yeas ago, there were ancient people living at Songze, Qingpu County, Shanghai. This paper reports the study of ancient potteries unearthed from the Guangfulin site located at Songjiang, Shanghai. The potteries unearthed from Guangfulin site belonged to two different culture types: the Liangzhu culture type (local culture) and a new culture, which might be derived from elsewhere. PIXE has been used to measure the chemical compositions of samples and factor analysis was used. Experimental results show that the compositions of the pottery from the two phases are different from each other. It means that the raw materials used to make the ancient pottery originate from different places. This results support the idea suggested by archaeologists that a group of ancient people migrated to the Shanghai area from some other place 4000 years ago

X-ray analysis of pigments on ancient Egyptian monuments

International Nuclear Information System (INIS)

Uda, M.; Sassa, S.; Yoshioka, T.

1999-01-01

Ancient pigments were analyzed using PIXE and XRD methods in the laboratory, which were painted on ancient Egyptian monuments. On the other hand, those on monuments remaining with entire shape were investigated using the hand-held type of an XRF spectrometer and an X-ray diffractometer in the field. For the laboratory experiment, several wall fragments of the Malqata palace in ancient Egypt (18th Dynasty, ca. 1390 B.C.) were investigated. In the field experiment, the block of Ramesses II (19th Dynasty, ca. 1270 B.C.), the Wooden Coffin of Neb-sny (18th Dynasty, ca. 1400 B.C.), the Funerary Stele of Amenemhat (11th Dynasty, ca. 2000 B.C.), and the painted walls of the Tomb of Userhat (18th Dynasty, ca. 1400 B.C.) were investigated. From white and blue colored parts, huntite and Egyptian blue were found, respectively, which are a very rare mineral and an artificial pigment prepared only in ancient Egypt, respectively. (author)

X-ray analysis of pigments on ancient Egyptian monuments

Energy Technology Data Exchange (ETDEWEB)

Uda, M.; Sassa, S.; Yoshioka, T. [Waseda Univ., Department of Materials Science and Engineering, Tokyo (JP)] [and others

1999-07-01

Ancient pigments were analyzed using PIXE and XRD methods in the laboratory, which were painted on ancient Egyptian monuments. On the other hand, those on monuments remaining with entire shape were investigated using the hand-held type of an XRF spectrometer and an X-ray diffractometer in the field. For the laboratory experiment, several wall fragments of the Malqata palace in ancient Egypt (18th Dynasty, ca. 1390 B.C.) were investigated. In the field experiment, the block of Ramesses II (19th Dynasty, ca. 1270 B.C.), the Wooden Coffin of Neb-sny (18th Dynasty, ca. 1400 B.C.), the Funerary Stele of Amenemhat (11th Dynasty, ca. 2000 B.C.), and the painted walls of the Tomb of Userhat (18th Dynasty, ca. 1400 B.C.) were investigated. From white and blue colored parts, huntite and Egyptian blue were found, respectively, which are a very rare mineral and an artificial pigment prepared only in ancient Egypt, respectively. (author)

Second-harmonic generation imaging of collagen in ancient bone

Directory of Open Access Journals (Sweden)

B. Thomas

2017-12-01

Full Text Available Second-harmonic generation imaging (SHG captures triple helical collagen molecules near tissue surfaces. Biomedical research routinely utilizes various imaging software packages to quantify SHG signals for collagen content and distribution estimates in modern tissue samples including bone. For the first time using SHG, samples of modern, medieval, and ice age bones were imaged to test the applicability of SHG to ancient bone from a variety of ages, settings, and taxa. Four independent techniques including Raman spectroscopy, FTIR spectroscopy, radiocarbon dating protocols, and mass spectrometry-based protein sequencing, confirm the presence of protein, consistent with the hypothesis that SHG imaging detects ancient bone collagen. These results suggest that future studies have the potential to use SHG imaging to provide new insights into the composition of ancient bone, to characterize ancient bone disorders, to investigate collagen preservation within and between various taxa, and to monitor collagen decay regimes in different depositional environments.

Fatigue of dental ceramics.

Science.gov (United States)

Zhang, Yu; Sailer, Irena; Lawn, Brian R

2013-12-01

Clinical data on survival rates reveal that all-ceramic dental prostheses are susceptible to fracture from repetitive occlusal loading. The objective of this review is to examine the underlying mechanisms of fatigue in current and future dental ceramics. The nature of various fatigue modes is elucidated using fracture test data on ceramic layer specimens from the dental and biomechanics literature. Failure modes can change over a lifetime, depending on restoration geometry, loading conditions and material properties. Modes that operate in single-cycle loading may be dominated by alternative modes in multi-cycle loading. While post-mortem examination of failed prostheses can determine the sources of certain fractures, the evolution of these fractures en route to failure remains poorly understood. Whereas it is commonly held that loss of load-bearing capacity of dental ceramics in repetitive loading is attributable to chemically assisted 'slow crack growth' in the presence of water, we demonstrate the existence of more deleterious fatigue mechanisms, mechanical rather than chemical in nature. Neglecting to account for mechanical fatigue can lead to gross overestimates in predicted survival rates. Strategies for prolonging the clinical lifetimes of ceramic restorations are proposed based on a crack-containment philosophy. Copyright © 2013 Elsevier Ltd. All rights reserved.

Preparation of 147Pm ceramic source core

International Nuclear Information System (INIS)

Mielcarski, M.

1989-01-01

Preparation of ceramic pellets containing fixed promethium-147 is described. Incorporation rate of 147 Pm into the ceramic material was determined. The leachability and vaporization of promethium from the obtained ceramics was investigated. The ceramic pellets prepared by the described procedure, mounted in special holders, can be applied as point sources in beta backscatter thickness gauges. (author)

Achievement report for fiscal 1992. Research and development of ceramic gas turbine (Portable regenerative double-shaft ceramic gas turbine for portable power generation); 1992 nendo ceramic gas turbine no kenkyu kaihatsu seika hokokusho. Kahanshiki hatsuden'yo saiseishiki ceramic gas turbine

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-05-01

Research and development has been advanced on a ceramic gas turbine (CGT) with an output of 300-kW class and thermal efficiency of 42% or higher. Activities were performed in the following three fields: 1) research of heat resistant ceramic members, 2) research of elementary technologies, and 3) studies on design, prototype fabrication, and operation. In Item 1, research was performed on forming the heat resistant ceramic members, and all-ceramic members constituting the basic type gas turbine were fabricated. Improvements were given on the problems discovered in the heat shock test, and the hot spin test. In Item 2, elementary researches were made on the basic technologies for the ceramic gas turbine, such as on the heat exchanger, combustor, and ceramic turbine, wherein discussions were given on improvement of mechanical strength and performance. In Item 3, design and prototype fabrication were performed on the basic type ceramic gas turbine, based on the results of research operations on the basic type (metallic gas turbine). Adjustment operations were launched on some of the components. (NEDO)

Dense high temperature ceramic oxide superconductors

Science.gov (United States)

Landingham, Richard L.

1993-01-01

Dense superconducting ceramic oxide articles of manufacture and methods for producing these articles are described. Generally these articles are produced by first processing these superconducting oxides by ceramic processing techniques to optimize materials properties, followed by reestablishing the superconducting state in a desired portion of the ceramic oxide composite.

Transmission of Er:YAG laser through different dental ceramics.

Science.gov (United States)

Sari, Tugrul; Tuncel, Ilkin; Usumez, Aslihan; Gutknecht, Norbert

2014-01-01

The aim of this study was to determine the erbium-doped yttrium aluminum garnet (Er:YAG) laser transmission ratio through different dental ceramics with different thicknesses. Laser debonding procedure of adhesively luted all-ceramic restorations is based on the transmission of laser energy through the ceramic and the ablation of resin cement, because of the transmitted laser energy. Five different dental ceramics were evaluated in this study: sintered zirconium-oxide core ceramic, monolithic zirconium-oxide ceramic, feldspathic ceramic, leucite-reinforced glass ceramic, and lithium disilicate-reinforced glass ceramic. Two ceramic discs with different thicknesses (0.5 and 1 mm) were fabricated for each group. Ceramic discs were placed between the sensor membrane of the laser power meter and the tip of the contact handpiece of an Er:YAG laser device with the aid of a custom- made acrylic holder. The transmission ratio of Er:YAG laser energy (500 mJ, 2 Hz, 1 W, 1000 μs) through different ceramic discs was measured with the power meter. Ten measurements were made for each group and the results were analyzed with two way analysis of variance (ANOVA) and Tukey honestly significant difference (HSD) tests. The highest transmission ratio was determined for lithium disilicate-reinforced ceramic with 0.5 mm thickness (88%) and the lowest was determined for feldspathic ceramic with 1 mm thickness (44%). The differences among the different ceramics and between the different thicknesses were significant (pCeramic type and thickness should be taken into consideration to adjust the laser irradiation parameters during laser debonding of adhesively luted all-ceramic restorations.

Performances of multi-channel ceramic photomultipliers

International Nuclear Information System (INIS)

Comby, G.; Karolak, M.; Piret, Y.; Mouly, J.P.

1995-09-01

Ceramic electron multipliers with real metal dynodes and independent channels ware constructed using multilayer ceramic technology. Tests of these prototypes show their capability to form sensitive detectors such as photomultipliers or light intensifiers. Here, we present results for the photocathode sensitivity, dynode activation, gain, linearity range and dynamic characteristics as well as the effect of 3-year aging of the main operational functions. The advantages provided by the ceramic components are discussed. These results motivate the development of a compact 256 pixel ceramic photomultiplier. (author)

Emerging ceramic-based materials for dentistry.

Science.gov (United States)

Denry, I; Kelly, J R

2014-12-01

Our goal is to give an overview of a selection of emerging ceramics and issues for dental or biomedical applications, with emphasis on specific challenges associated with full-contour zirconia ceramics, and a brief synopsis on new machinable glass-ceramics and ceramic-based interpenetrating phase composites. Selected fabrication techniques relevant to dental or biomedical applications such as microwave sintering, spark plasma sintering, and additive manufacturing are also reviewed. Where appropriate, the authors have added their opinions and guidance. © International & American Associations for Dental Research.

Masking ability of bi- and tri- laminate all-ceramic veneers on tooth-colored ceramic discs.

Science.gov (United States)

Farhan, Daniel; Sukumar, Smitha; von Stein-Lausnitz, Axel; Aarabi, Ghazal; Alawneh, Ahmad; Reissmann, Daniel R

2014-01-01

A predictable esthetic outcome is imperative when placing ceramic veneers. Discolored teeth pose a major challenge as sufficient material thickness is required to achieve a good esthetic result. There is limited evidence in the literature that compares the masking ability of multi-laminate veneers. The aim of this in-vitro study was to compare the masking ability of bi-laminate (BL) and tri-laminate (TL) all-ceramic veneers cemented on tooth-colored ceramic discs. A total of 40 veneers (shade A1, 10-mm diameter, 0.8-mm thick) were manufactured-20 BL veneers (0.4-mm pressable ceramic coping veneered with 0.4-mm thick enamel layer) and 20 TL veneers (0.4-mm coping veneered with 0.2-mm thick opaque interlayer and 0.2-mm thick enamel layer). A bonding apparatus was utilized to adhesively cement all veneers on the ceramic discs (shade A1), simulating teeth of light and dark color. The resulting groups (N = 10 each) were the reference groups (shade A1 ceramic base) BL-1 and TL-1 veneers, and the test groups (shade A4 ceramic base) BL-4 and TL-4 veneers. The color of the cemented veneers was measured using a spectrophotometer. The data were converted to CIE L*a*b* coordinates, and ΔE* were calculated to allow for statistical analysis. The color differences between the samples with the A1 and A4 ceramic bases were significantly lower when covered with TL veneers (mean ΔE*: 3.2 units) than with BL veneers (mean ΔE*: 4.0 units: p bi-laminate veneers. Patients with discolored/darker teeth may benefit from a more predictable esthetic result when teeth restored with tri-laminate rather than bi-laminate veneers. © 2014 Wiley Periodicals, Inc.

Assessing the fidelity of ancient DNA sequences amplified from nuclear genes

DEFF Research Database (Denmark)

Binladen, Jonas; Wiuf, Carsten Henrik; Gilbert, M. Thomas P.

2006-01-01

To date, the field of ancient DNA has relied almost exclusively on mitochondrial DNA (mtDNA) sequences. However, a number of recent studies have reported the successful recovery of ancient nuclear DNA (nuDNA) sequences, thereby allowing the characterization of genetic loci directly involved...... in phenotypic traits of extinct taxa. It is well documented that postmortem damage in ancient mtDNA can lead to the generation of artifactual sequences. However, as yet no one has thoroughly investigated the damage spectrum in ancient nuDNA. By comparing clone sequences from 23 fossil specimens, recovered from...... adenine), respectively. Type 2 transitions are by far the most dominant and increase relative to those of type 1 with damage load. The results suggest that the deamination of cytosine (and 5-methyl cytosine) to uracil (and thymine) is the main cause of miscoding lesions in both ancient mtDNA and nu...

Creative Ventures: Ancient Civilizations.

Science.gov (United States)

Stark, Rebecca

The open-ended activities in this book are designed to extend the imagination and creativity of students and encourage students to examine their feelings and values about historic eras. Civilizations addressed include ancient Egypt, Greece, Rome, Mayan, Stonehenge, and Mesopotamia. The activities focus upon the cognitive and affective pupil…

Penile representations in ancient Greek art.

Science.gov (United States)

Rempelakos, L; Tsiamis, C; Poulakou-Rebelakou, E

2013-12-01

The presentation of the cult of phallus in ancient Greece and the artistic appearance of the phenomenon on vase figures and statues, as indicative of the significant role of the male genitalia in all fertility ceremonies. The examination of a great number of penile representations from the ancient Greek pottery and sculpture and the review of the ancient theater plays (satiric dramas and comedies ). Phallus in artistic representation is connected either with gods of fertility, such as the goat-footed and horned Pan or the ugly dwarf Priapus or the semi-animal nailed figures Satyrs, devotees of the god Dionysus accompanying him in all ritual orgiastic celebrations. Phallus also symbolizes good luck, health and sexuality: people bear or wear artificial phalli exactly like the actors as part of their costume or carry huge penises during the festive ritual processions. On the contrary, the Olympic gods or the ordinary mortals are not imaged ithyphallic; the ideal type of male beauty epitomized in classical sculpture, normally depicts genitals of average or less than average size. It is noteworthy that many of these images belong to athletes during or immediately after hard exercise with the penis shrunk. The normal size genitalia may have been simply a convention to distinguish normal people from the gods of sexuality and fertility, protectors of the reproductive process of Nature. The representation of the over-sized and erected genitalia on vase figures or statues of ancient Greek art is related to fertility gods such as Priapus, Pan and Satyrs and there is strong evidence that imagination and legend were replacing the scientific achievements in the field of erectile function for many centuries.

Medicine and psychiatry in Western culture: Ancient Greek myths and modern prejudices

Directory of Open Access Journals (Sweden)

Clementi Nicoletta

2009-10-01

Full Text Available Abstract The origins of Western culture extensively relate to Ancient Greek culture. While many ancient cultures have contributed to our current knowledge about medicine and the origins of psychiatry, the Ancient Greeks were among the best observers of feelings and moods patients expressed towards medicine and toward what today is referred to as 'psychopathology'. Myths and religious references were used to explain what was otherwise impossible to understand or be easily communicated. Most ancient myths focus on ambiguous feelings patients may have had towards drugs, especially psychotropic ones. Interestingly, such prejudices are common even today. Recalling ancient findings and descriptions made using myths could represent a valuable knowledge base for modern physicians, especially for psychiatrists and their patients, with the aim of better understanding each other and therefore achieving a better clinical outcome. This paper explores many human aspects and feelings towards doctors and their cures, referring to ancient myths and focusing on the perception of mental illness.

Ancient Egypt

Science.gov (United States)

Swamy, Ashwin Balegar

This thesis involves development of an interactive GIS (Geographic Information System) based application, which gives information about the ancient history of Egypt. The astonishing architecture, the strange burial rituals and their civilization were some of the intriguing questions that motivated me towards developing this application. The application is a historical timeline starting from 3100 BC, leading up to 664 BC, focusing on the evolution of the Egyptian dynasties. The tool holds information regarding some of the famous monuments which were constructed during that era and also about the civilizations that co-existed. It also provides details about the religions followed by their kings. It also includes the languages spoken during those periods. The tool is developed using JAVA, a programing language and MOJO (Map Objects Java Objects) a product of ESRI (Environmental Science Research Institute) to create map objects, to provide geographic information. JAVA Swing is used for designing the user interface. HTML (Hyper Text Markup Language) pages are created to provide the user with more information related to the historic period. CSS (Cascade Style Sheets) and JAVA Scripts are used with HTML5 to achieve creative display of content. The tool is kept simple and easy for the user to interact with. The tool also includes pictures and videos for the user to get a feel of the historic period. The application is built to motivate people to know more about one of the prominent and ancient civilization of the Mediterranean world.

Advanced ceramic in structural engineering

OpenAIRE

Alonso Rodea, Jorge

2012-01-01

The work deals with "Advanced Ceramics in Structural Engineering”. Throughout this work we present the different types of ceramic that are currently in wider use, and the main research lines that are being followed. Ceramics have very interesting properties, both mechanical and electrical and refractory where we can find some of the most interesting points of inquiry. Through this work we try tounderstand this complex world, analyzing both general and specific properties of ...

The technical ceramics (second part)

International Nuclear Information System (INIS)

Auclerc, S.; Poulain, E.

2004-01-01

This work deals with ceramics used in the nuclear and the automotive industries. Concerning the nuclear sector, ceramics are particularly used in reactors, in the treatment of radioactive wastes and for the storage of the ultimate wastes. Details are given about the different ceramics used. In the automobile sector, aluminium is principally used for its lightness and cordierite, basic material of catalyst supports is especially used in the automobile devices of cleansing. (O.M.)

Formulation of nano-ceramic filters used in separation of heavy metals . Part II: Zirconia ceramic filters

International Nuclear Information System (INIS)

Khalil, T.; Labib, Sh.; Abou EI-Nour, F.H.; Abdel-Kbalik, M.

2007-01-01

Zirconia ceramic filters are prepared using polymeric sol-gel process. An optimization of synthesis parameters was studied to give cracked free coated nano porous film with high performance quality. Zirconia ceramic filters are characterized to select tbe optimized conditions that give tbe suitable zirconia filter used in heavy metal separation. The ceramic filters were characterized using BET method for surface measurements, mercury porosimeter for pore size distribution analysis and coating thickness measurements, SEM for microstructural studies and atomic absorption spectrophotometer (AAS) for metal analysis. The results indicated that zirconia ceramic filters. show high separation performance for cadmium, cupper, iron, manganese and lead

Phase composition of yttrium-doped zirconia ceramics

Energy Technology Data Exchange (ETDEWEB)

Hennig, Christoph; Scheinost, Andreas C. [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Molecular Structures; Weiss, Stephan [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Surface Processes; Ikeda-Ohno, Atsushi [Helmholtz-Zentrum Dresden-Rossendorf e.V., Dresden (Germany). Chemistry of the F-Elements; Gumeniuk, R. [Technische Univ. Bergakademie Freiberg (Germany). Inst. fuer Experimentelle Physik

2017-06-01

Ceramic material might be an alternative to borosilicate glass for the immobilization of nuclear waste. The crystallinity of ceramic material increases the corrosion resistance over several magnitudes in relation to amorphous glasses. The stability of such ceramics depend on several parameters, among them the crystal phase composition. A reliable quantitative phase analysis is necessary to correlate the macroscopic material properties with structure parameters. We performed a feasibility study based on yttrium-doped zirconia ceramics as analogue for trivalent actinides to ascertain that the nanosized crystal phases in zirconia ceramics can be reliably determined.

OXYGEN TRANSPORT CERAMIC MEMBRANES

Energy Technology Data Exchange (ETDEWEB)

Dr. Sukumar Bandopadhyay; Dr. Nagendfra Nagabhushana

2001-07-01

The mechanical properties of model systems were analyzed. A reasonably accurate finite element model was implemented and a rational metric to predict the strength of ceramic/metal concentrical joints was developed. The mode of failure of the ceramic/metal joints was determined and the importance of the mechanical properties of the braze material was assessed. Thermal cycling experiments were performed on the model systems and the results were discussed. Additionally, experiments using the concept of placing diffusion barriers on the ceramic surface to limit the extent of the reaction with the braze were performed. It was also observed that the nature and morphology of the reaction zone depends greatly on the nature of the perovskite structure being used. From the experiments, it is observed that the presence of Cr in the Fe-occupied sites decreases the tendency of Fe to segregate and to precipitate out of the lattice. In these new experiments, Ni was observed to play a major role in the decomposition of the ceramic substrate.

Fiscal 1997 achievement report. Research and development of synergy ceramics; 1997 nendo synergy ceramics no kenkyu kaihatsu seika hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Research and development is conducted on two subjects, that is, 1) hyper organized structure control technology and 2) structural element control technology. In addition, joint research and development is conducted on the creation of new materials by hyper organized structure controlling, hyper organized structure controlling for ceramics by a structurization reaction process, designing of precursors to ceramics, and the hyper organized structure control for ceramics by nanostructure process control. The joint research and development endeavors further deal with re-entrusted projects which involve researches on sintered structure control by powdery particulate structure control; dynamic process of synergy ceramics; oxynitride liquids, glasses, and glass-ceramics; and multifunctional ceramic laminates for engineering applications. Under subject 1), researches are made on the development of precursors into ceramics by utilizing chemical reactions of organic metal compounds, and analyses are conducted into the effects, exerted by the molecular structures of precursors and the conditions of a reaction for their development into ceramics, on the microstructures and various properties of the ceramics to be composed. Under subject 2), high strength, great hardness, and high resistance to wear are realized by allowing the precipitation of nano-particulates in crystals of a fine and very compact sintered body of alumina. (NEDO)

Molecular analysis of ancient caries

Science.gov (United States)

Simón, Marc; Montiel, Rafael; Smerling, Andrea; Solórzano, Eduvigis; Díaz, Nancy; Álvarez-Sandoval, Brenda A.; Jiménez-Marín, Andrea R.; Malgosa, Assumpció

2014-01-01

An 84 base pair sequence of the Streptococcus mutans virulence factor, known as dextranase, has been obtained from 10 individuals from the Bronze Age to the Modern Era in Europe and from before and after the colonization in America. Modern samples show four polymorphic sites that have not been found in the ancient samples studied so far. The nucleotide and haplotype diversity of this region have increased over time, which could be reflecting the footprint of a population expansion. While this segment has apparently evolved according to neutral evolution, we have been able to detect one site that is under positive selection pressure both in present and past populations. This study is a first step to study the evolution of this microorganism, analysed using direct evidence obtained from ancient remains. PMID:25056622

The TL dating of ancient porcelain

International Nuclear Information System (INIS)

Leung, P.L.; Stokes, M.J.; Wang Weida; Xia Junding; Zhou Zhixin

1997-01-01

The age determination of ancient porcelain using the pre-dose technique in TL dating was reported. The variation of beta dose with depth below the surface of the porcelain slice, the thermal activation characteristic (TAC) for 110 degree C peak, the measurement of paleodose and the estimation of annual dose were studied. The results show that this technique is suitable for authenticity testing of ancient porcelain, but both accuracy and precision for porcelain dating are worse than those for pottery, because porcelain differs from pottery on composition, structure and firing temperature. Besides, some complicated factors in the pre-dose technique would be the possible cause of the greater errors

TREATMENT OF FRACTURES IN ANCIENT EGYPT

Directory of Open Access Journals (Sweden)

Z. K. Bashurov

2012-01-01

Full Text Available The most complete information about the medicine in Ancient Egypt two papyrus provided: a large medical papyrus of G. Ebers and papyrus about the surgery of E. Smith. Smith’s papyrus is of particular interest as it contains the information on the status of surgery in Ancient Egypt. Papyrus consists of descriptions of the clinical cases. To the present time, 48 cases have survived; it is arranged in order of location - from the head down to the feet. Orthopedic deformities were reflected in the figures on the walls of the pyramids and temples as well as the description of the mummies and archaeological finds.

Survival of anterior cantilevered all-ceramic resin-bonded fixed dental prostheses made from zirconia ceramic.

Science.gov (United States)

Sasse, Martin; Kern, Matthias

2014-06-01

This study evaluated the clinical outcome of all-ceramic resin-bonded fixed dental prostheses (RBFDPs) with a cantilevered single-retainer design made from zirconia ceramic. Forty-two anterior RBFDPs with a cantilevered single-retainer design were made from yttrium oxide-stabilized zirconium oxide ceramic. RBFDPs were inserted using Panavia 21 TC as luting agent after air-abrasion of the ceramic bonding surface. During a mean observation time of 61.8 months two debondings occurred. Both RBFDPs were rebonded using Panavia 21 TC and are still in function. A caries lesion was detected at one abutment tooth during recall and was treated with a composite filling. Therefore, the overall six-year failure-free rate according to Kaplan-Meier was 91.1%. If only debonding was defined as failure the survival rate increased to 95.2%. Since all RBFDPs are still in function the overall survival rate was 100% after six years. Cantilevered zirconia ceramic RBFDPs showed promising results within the observation period. Single-retainer resin-bonded fixed dental prostheses made from zirconia ceramic show very good mid-term clinical survival rates. They should therefore be considered as a viable treatment alternative for the replacement of single missing anterior teeth especially as compared to an implant therapy. Copyright © 2014 Elsevier Ltd. All rights reserved.

Selecting Ceramics - Introduction

OpenAIRE

Cassidy, M.

2002-01-01

AIM OF PRESENTATION: To compare a number of materials for extracoronal restoration of teeth with particular reference to CAD-CAM ceramics. CASE DESCRIPTION AND TREATMENT CARRIED OUT: This paper will be illustrated using clinical examples of patients treated using different ceramic restorations to present the advantages and disadvantages and each technique. The different requirements of tooth preparation, impression taking and technical procedures of each system will be presented and compar...

Effect of various intermediate ceramic layers on the interfacial stability of zirconia core and veneering ceramics.

Science.gov (United States)

Yoon, Hyung-In; Yeo, In-Sung; Yi, Yang-Jin; Kim, Sung-Hun; Lee, Jai-Bong; Han, Jung-Suk

2015-01-01

The purposes of this study were to evaluate the effects of intermediate ceramics on the adhesion between the zirconia core and veneer ceramics. The polished surfaces of fully sintered Y-TZP blocks received three different treatments: (1) connector (C), (2) liner (L) or (3) wash layer (W). All the treated zirconia blocks were veneered with either (a) fluorapatite glass-ceramic (E) or (b) feldspathic porcelain (V) and divided into four groups (CE, CV, LE and WV). For the control group, the testing surfaces of metal blocks were veneered with feldspathic porcelain (VM). A half of the samples in each group (n = 21) were exposed to thermocycling, while the other half of the specimens were stored at room temperature under dry conditions. All specimens were subjected to the shear test and the failed surfaces were microscopically examined. The elemental distribution at the zirconia core/veneer interface was analyzed. The specimens in Groups CE and CV exhibited significantly greater mean bond strength values than those in Groups LE and WV, respectively (p ceramic substances into the zirconia surface. A glass-ceramic based connector is significantly more favorable to core/veneer adhesion than the other intermediate ceramics evaluated in the study. However, thermal cycling affected the bond strength at the core/veneer interface differently according to the intermediate ceramics.

Issue of Separation of Powers in Ancient Iran

Directory of Open Access Journals (Sweden)

Mohammad Javad Javid

2012-03-01

Full Text Available Cotemporary public law in Iran cannot ignore the elements of its identity in the past. Although analysis of public law issue in ancient Iran, the most researchers to be considered so it is not easy to speak about separation of powers, the part of the body of public law in the Iran primary governments but this article constants on hypothesis which with think and assimilation in history of ancient Iran which can laying the groundwork of strengthening people rights and limitation of authority's governors with emphasis on three periods of governorship on ancient Iran .for example Hakhamaneshian, Ashkanian and Sasanian. This article intent to clear haw can in these periods, the primary figure and foundation of separation of powers and functions division in body of previous governments of Iran to be observed.

History through Art and Architecture: Ancient Greek Architecture [and] Ancient Greek Sculpture. Teacher's Manual.

Science.gov (United States)

Campbell, Ann

This document consists of two teaching manuals designed to accompany a commercially-available "multicultural, interdisciplinary video program," consisting of four still videotape programs (72 minutes, 226 frames), one teaching poster, and these two manuals. "Teacher's Manual: Ancient Greek Architecture" covers: "Ancient…

Tritium behaviour in ceramic breeder blankets

International Nuclear Information System (INIS)

Miller, J.M.

1989-01-01

Tritium release from the candidate ceramic materials, Li 2 O, LiA10 2 , Li 2 SiO 3 , Li 4 SiO 4 and Li 2 ZrO 3 , is being investigated in many blanket programs. Factors that affect tritium release from the ceramic into the helium sweep gas stream include operating temperature, ceramic microstructure, tritium transport and solubility in the solid. A review is presented of the material properties studied and of the irradiation programs and the results are summarized. The ceramic breeder blanket concept is briefly reviewed

Material and elastic properties of Al-tobermorite in ancient roman seawater concrete

KAUST Repository

Jackson, Marie D.

2013-05-28

The material characteristics and elastic properties of aluminum-substituted 11 Å tobermorite in the relict lime clasts of 2000-year-old Roman seawater harbor concrete are described with TG-DSC and 29Si MAS NMR studies, along with nanoscale tomography, X-ray microdiffraction, and high-pressure X-ray diffraction synchrotron radiation applications. The crystals have aluminum substitution for silicon in tetrahedral bridging and branching sites and 11.49(3) Å interlayer (002) spacing. With prolonged heating to 350°C, the crystals exhibit normal behavior. The experimentally measured isothermal bulk modulus at zero pressure, K0, 55 ±5 GPa, is less than ab initio and molecular dynamics models for ideal tobermorite with a double-silicate chain structure. Even so, K0, is substantially higher than calcium-aluminum-silicate-hydrate binder (C-A-S-H) in slag concrete. Based on nanoscale tomographic study, the crystal clusters form a well connected solid, despite having about 52% porosity. In the pumiceous cementitious matrix, Al-tobermorite with 11.27 Å interlayer spacing is locally associated with phillipsite, similar to geologic occurrences in basaltic tephra. The ancient concretes provide a sustainable prototype for producing Al-tobermorite in high-performance concretes with natural volcanic pozzolans. © 2013 The American Ceramic Society.

Research on Durability of Recycled Ceramic Powder Concrete

Science.gov (United States)

Chen, M. C.; Fang, W.; Xu, K. C.; Xie, L.

2017-06-01

Ceramic was ground into powder with 325 mesh and used to prepare for concrete. Basic mechanical properties, carbonation and chloride ion penetration of the concrete tests were conducted. In addition, 6-hour electric fluxes of recycled ceramic powder concrete were measured under loading. The results showed that the age strength of ceramics powder concrete is higher than that of the ordinary concrete and the fly ash concrete. The ceramic powder used as admixture would reduce the strength of concrete under no consideration of its impact factor; under consideration of the impact factor for ceramic powder as admixture, the carbonation resistance of ceramic powder concrete was significantly improved, and the 28 day carbonation depth of the ceramic powder concrete was only 31.5% of ordinary concrete. The anti-chloride-permeability of recycled ceramic powder concrete was excellent.

Mixed-mode fracture of ceramics

Energy Technology Data Exchange (ETDEWEB)

Petrovic, J.J.

1985-01-01

The mixed-mode fracture behavior of ceramic materials is of importance for monolithic ceramics in order to predict the onset of fracture under generalized loading conditions and for ceramic composites to describe crack deflection toughening mechanisms. Experimental data on surface flaw mixed-mode fracture in various ceramics indicate that the flaw-plane normal stress at fracture decreases with increasing in-flaw-plane shear stress, although present data exhibit a fairly wide range in details of this sigma - tau relationship. Fracture from large cracks suggests that Mode II has a greater effect on Mode I fracture than Mode III. A comparison of surface flaw and large crack mixed-mode I-II fracture responses indicated that surface flaw behavior is influenced by shear resistance effects.

Fibrous-Ceramic/Aerogel Composite Insulating Tiles

Science.gov (United States)

White, Susan M.; Rasky, Daniel J.

2004-01-01

Fibrous-ceramic/aerogel composite tiles have been invented to afford combinations of thermal-insulation and mechanical properties superior to those attainable by making tiles of fibrous ceramics alone or aerogels alone. These lightweight tiles can be tailored to a variety of applications that range from insulating cryogenic tanks to protecting spacecraft against re-entry heating. The advantages and disadvantages of fibrous ceramics and aerogels can be summarized as follows: Tiles made of ceramic fibers are known for mechanical strength, toughness, and machinability. Fibrous ceramic tiles are highly effective as thermal insulators in a vacuum. However, undesirably, the porosity of these materials makes them permeable by gases, so that in the presence of air or other gases, convection and gas-phase conduction contribute to the effective thermal conductivity of the tiles. Other disadvantages of the porosity and permeability of fibrous ceramic tiles arise because gases (e.g., water vapor or cryogenic gases) can condense in pores. This condensation contributes to weight, and in the case of cryogenic systems, the heat of condensation undesirably adds to the heat flowing to the objects that one seeks to keep cold. Moreover, there is a risk of explosion associated with vaporization of previously condensed gas upon reheating. Aerogels offer low permeability, low density, and low thermal conductivity, but are mechanically fragile. The basic idea of the present invention is to exploit the best features of fibrous ceramic tiles and aerogels. In a composite tile according to the invention, the fibrous ceramic serves as a matrix that mechanically supports the aerogel, while the aerogel serves as a low-conductivity, low-permeability filling that closes what would otherwise be the open pores of the fibrous ceramic. Because the aerogel eliminates or at least suppresses permeation by gas, gas-phase conduction, and convection, the thermal conductivity of such a composite even at

Ancient Egypt: Personal Perspectives.

Science.gov (United States)

Wolinski, Arelene

This teacher resource book provides information on ancient Egypt via short essays, photographs, maps, charts, and drawings. Egyptian social and religious life, including writing, art, architecture, and even the practice of mummification, is conveniently summarized for the teacher or other practitioner in a series of one to three page articles with…

Ancient literature in the teaching of the Ljubljana jesuits

Directory of Open Access Journals (Sweden)

Nada Grošelj

2004-12-01

Full Text Available Members of the Jesuit Order came to Ljubljana in 1597, founding a »gymnasium« and later expanding it with a semi-university. In contrast to certain other orders, they fostered the classics, as is evidenced by their teaching, scholarly research, and literary composition. The scholarly work of the Jesuits active in present-day Slovenia was mostly concentrated on ancient philosophy, as is shown in the second section of this paper. Their teaching, on the other hand, included both classroom lessons and more creative activities, such as the writing and staging of school plays. The Jesuit school system with its six gymnasium classes is described in the first section of the paper, and the school curriculum (based almost exclusively on the teaching of Latin literature and methods in the third. The fourth section presents the documents relating to the final gymnasium examinations in ancient literature which took place in Ljubljana, with a survey of the contents of the questions. The fifth section outlines the characteristics of Jesuit school drama. The plays performed in Ljubljana are lost, but, judging by the preserved titles and synopses, ancient themes appear to have been relatively rare. Nevertheless, the paper succeeds in isolating seventeen works (discussed in the sixth section which must have either utilised plots from ancient literature or drawn inspiration from ancient stock characters and rhetoric.

Ceramic technology for Advanced Heat Engines Project

Energy Technology Data Exchange (ETDEWEB)

Johnson, D.R.

1991-07-01

Significant accomplishments in fabricating ceramic components for advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and database and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. An assessment of needs was completed, and a five year project plan was developed with extensive input from private industry. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on the structural ceramics for advanced gas turbine and diesel engines, ceramic bearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines. To facilitate the rapid transfer of this technology to US industry, the major portion of the work is being done in the ceramic industry, with technological support from government laboratories, other industrial laboratories, and universities. This project is managed by ORNL for the Office of Transportation Technologies, Office of Transportation Materials, and is closely coordinated with complementary ceramics tasks funded by other DOE offices, NASA, DOD, and industry.

Ceramic Technology for Advanced Heat Engines Project

Energy Technology Data Exchange (ETDEWEB)

1990-08-01

The Ceramic Technology For Advanced Heat Engines Project was developed by the Department of Energy's Office of Transportation Systems (OTS) in Conservation and Renewable Energy. This project, part of the OTS's Advanced Materials Development Program, was developed to meet the ceramic technology requirements of the OTS's automotive technology programs. Significant accomplishments in fabricating ceramic components for the Department of Energy (DOE), National Aeronautics and Space Administration (NASA), and Department of Defense (DOD) advanced heat engine programs have provided evidence that the operation of ceramic parts in high-temperature engine environments is feasible. However, these programs have also demonstrated that additional research is needed in materials and processing development, design methodology, and data base and life prediction before industry will have a sufficient technology base from which to produce reliable cost-effective ceramic engine components commercially. An assessment of needs was completed, and a five year project plan was developed with extensive input from private industry. The objective of the project is to develop the industrial technology base required for reliable ceramics for application in advanced automotive heat engines. The project approach includes determining the mechanisms controlling reliability, improving processes for fabricating existing ceramics, developing new materials with increased reliability, and testing these materials in simulated engine environments to confirm reliability. Although this is a generic materials project, the focus is on structural ceramics for advanced gas turbine and diesel engines, ceramic hearings and attachments, and ceramic coatings for thermal barrier and wear applications in these engines.

Ceramic cutting tools materials, development and performance

CERN Document Server

Whitney, E Dow

1994-01-01

Interest in ceramics as a high speed cutting tool material is based primarily on favorable material properties. As a class of materials, ceramics possess high melting points, excellent hardness and good wear resistance. Unlike most metals, hardness levels in ceramics generally remain high at elevated temperatures which means that cutting tip integrity is relatively unaffected at high cutting speeds. Ceramics are also chemically inert against most workmetals.

Ceramic drug-delivery devices.

Science.gov (United States)

Lasserre, A; Bajpai, P K

1998-01-01

A variety of ceramics and delivery systems have been used to deliver chemicals, biologicals, and drugs at various rates for desired periods of time from different sites of implantation. In vitro and in vivo studies have shown that ceramics can successfully be used as drug-delivery devices. Matrices, inserts, reservoirs, cements, and particles have been used to deliver a large variety of therapeutic agents such as antibiotics, anticancer drugs, anticoagulants, analgesics, growth factors, hormones, steroids, and vaccines. In this article, the advantages and disadvantages of conventional drug-delivery systems and the different approaches used to deliver chemical and biological agents by means of ceramic systems will be reviewed.

Sin, Punishment And Forgiveness In Ancient Greek Religion: A ...

African Journals Online (AJOL)

This paper looks in particular at the special sin of hubris in ancient Greek religious thought. It examines what constitutes hubris and some cases in which hubris has been committed and punished. It demonstrates with examples that hubris is an unforgivable sin in ancient Greek religion and examines the reasons for this ...

Translation: an example from ancient Chinese to modern Chinese

NARCIS (Netherlands)

Liu, X; Hoede, C.

2002-01-01

In this paper, we gave an idea of translation by means of knowledge graph theory from ancient Chinese to modern Chinese, by using an example story. Actually, we give the details of the method of translation from ancient Chinese to modern Chinese step by step as carried out by hand. From the example,

Shock compression profiles in ceramics

Energy Technology Data Exchange (ETDEWEB)

Grady, D.E.; Moody, R.L.

1996-03-01

An investigation of the shock compression properties of high-strength ceramics has been performed using controlled planar impact techniques. In a typical experimental configuration, a ceramic target disc is held stationary, and it is struck by plates of either a similar ceramic or by plates of a well-characterized metal. All tests were performed using either a single-stage propellant gun or a two-stage light-gas gun. Particle velocity histories were measured with laser velocity interferometry (VISAR) at the interface between the back of the target ceramic and a calibrated VISAR window material. Peak impact stresses achieved in these experiments range from about 3 to 70 GPa. Ceramics tested under shock impact loading include: Al{sub 2}O{sub 3}, AlN, B{sub 4}C, SiC, Si{sub 3}N{sub 4}, TiB{sub 2}, WC and ZrO{sub 2}. This report compiles the VISAR wave profiles and experimental impact parameters within a database-useful for response model development, computational model validation studies, and independent assessment of the physics of dynamic deformation on high-strength, brittle solids.

MHD oxidant intermediate temperature ceramic heater study

Science.gov (United States)

Carlson, A. W.; Chait, I. L.; Saari, D. P.; Marksberry, C. L.

1981-09-01

The use of three types of directly fired ceramic heaters for preheating oxygen enriched air to an intermediate temperature of 1144K was investigated. The three types of ceramic heaters are: (1) a fixed bed, periodic flow ceramic brick regenerative heater; (2) a ceramic pebble regenerative heater. The heater design, performance and operating characteristics under conditions in which the particulate matter is not solidified are evaluated. A comparison and overall evaluation of the three types of ceramic heaters and temperature range determination at which the particulate matter in the MHD exhaust gas is estimated to be a dry powder are presented.

Microwave sintering of ceramic materials

Science.gov (United States)

Karayannis, V. G.

2016-11-01

In the present study, the potential of microwave irradiation as an innovative energy- efficient alternative to conventional heating technologies in ceramic manufacturing is reviewed, addressing the advantages/disadvantages, while also commenting on future applications of possible commercial interest. Ceramic materials have been extensively studied and used due to several advantages they exhibit. Sintering ceramics using microwave radiation, a novel technology widely employed in various fields, can be an efficient, economic and environmentally-friendlier approach, to improve the consolidation efficiency and reduce the processing cycle-time, in order to attain substantial energy and cost savings. Microwave sintering provides efficient internal heating, as energy is supplied directly and penetrates the material. Since energy transfer occurs at a molecular level, heat is generated throughout the material, thus avoiding significant temperature gradients between the surface and the interior, which are frequently encountered at high heating rates upon conventional sintering. Thus, rapid, volumetric and uniform heating of various raw materials and secondary resources for ceramic production is possible, with limited grain coarsening, leading to accelerated densification, and uniform and fine-grained microstructures, with enhanced mechanical performance. This is particularly important for manufacturing large-size ceramic products of quality, and also for specialty ceramic materials such as bioceramics and electroceramics. Critical parameters for the process optimization, including the electromagnetic field distribution, microwave-material interaction, heat transfer mechanisms and material transformations, should be taken into consideration.

Ceramic substrate including thin film multilayer surface conductor

Science.gov (United States)

Wolf, Joseph Ambrose; Peterson, Kenneth A.

2017-05-09

A ceramic substrate comprises a plurality of ceramic sheets, a plurality of inner conductive layers, a plurality of vias, and an upper conductive layer. The ceramic sheets are stacked one on top of another and include a top ceramic sheet. The inner conductive layers include electrically conductive material that forms electrically conductive features on an upper surface of each ceramic sheet excluding the top ceramic sheet. The vias are formed in each of the ceramic sheets with each via being filled with electrically conductive material. The upper conductive layer includes electrically conductive material that forms electrically conductive features on an upper surface of the top ceramic sheet. The upper conductive layer is constructed from a stack of four sublayers. A first sublayer is formed from titanium. A second sublayer is formed from copper. A third sublayer is formed from platinum. A fourth sublayer is formed from gold.

Development of ceramic vacuum pumps for fusion reactors

International Nuclear Information System (INIS)

Anon.

1990-01-01

To achieve the magnetic field resistance and tritium resistance which are required for vacuum pumps for fusion reactors, a vacuum pump consisting of middle-ceramic turbo molecular pump (TMP), using ceramic rotor and ceramic turbo roughing pump was developed. In colaboration with the Japan Atomic Energy Research Institute, performance tests on pumping speed, compression ratio of middle-ceramic TMP and both of pumping characteristics were carried out. Sufficient performances were obtained. It was showed that middle-ceramic TMP had pumping speed of more than 500 l/s, and could achieve the pressure below 4 x 10 -7 Pa. Ceramic turbo roughing pump could vacuum from atmospheric pressure. It is concluded that complete oil-free ceramic vacuum pump can be put into practical use (K.S.)

Synthesis and characterization of biomorphic ceramics

International Nuclear Information System (INIS)

Rambo, Carlos Renato

2001-01-01

Biotemplating represents a recently developed technology for manufacturing of biomorphous ceramics from naturally grown plant structures. This approach allows the production of ceramic materials with cellular structure, where the microstructural features of the ceramic product are similar to the native plant. After processing, the biomorphic ceramic exhibits directed pore morphology in the micrometer range. Biomorphic SiC fibers were produced from bamboo by carbothermal reduction of SiO 2 originally present in the bamboo structure. Bamboo pieces were heated up to 1500 deg C in argon to promote the reaction between carbon and silica. Biomorphic alumina, mullite and zirconia ceramics were manufactured via the sol-gel route by repeated infiltration of low viscous oxide precursors (sols) into rattan, pine and bamboo structures. The raw samples were pyrolyzed at 800 deg C in nitrogen for 1h and subsequently annealed at 1550 deg C in air. The microstructure and physical properties of the biomorphic ceramics were characterized by X-ray diffraction (XRD) and high temperature-XRD, scanning electron microscopy (SEM), porosimetry and picnometry. Thermal analysis (TGA/DTA) was performed on the infiltrated samples in order to evaluate the reactions and the total weight loss during the thermal process. The mechanical properties were evaluated by compressive strength tests. In contrast to conventional processed ceramic foam of similar porosity, the microstructure highly porous biomorphic ceramics shows uniaxial pore morphology with anisotropic properties. These properties are favorable for applications in catalyst support, filters or low-density heat insulation structures, or as biomaterials. (author)

A review of the strength properties of dental ceramics.

Science.gov (United States)

Hondrum, S O

1992-06-01

New ceramic materials for restorative dentistry have been developed and introduced in recent years. This article reviews advantages and disadvantages of dental ceramics, concentrating on strength properties. Included are factors affecting the strength of dental ceramic materials and the most common mechanisms for increasing the strength of dental ceramics. The properties of presently available materials such as dispersion-strengthened ceramics, cast ceramics, and foil-reinforced materials are discussed. Current research efforts to improve the fracture resistance of ceramic restorative materials are reviewed. A description of methods to evaluate the strength of ceramics is included, as a caution concerning the interpretation of strength data reported in the literature.

A new look at old bread: ancient Egyptian baking

Directory of Open Access Journals (Sweden)

Delwen Samuel

1999-11-01

Full Text Available Despite abundant archaeological, pictorial and textual evidence of ancient Egyptian life and death, we have little detailed information about the staple diet of most of the population. Now experimental work by a postdoctoral Wellcome Research Fellow in Bioarchaeology at the Institute is revealing how the ancient Egyptians made their daily bread.

Effect of furnace type and ceramming heat treatment conditions on the biaxial flexural strength of a canasite glass-ceramic.

Science.gov (United States)

Johnson, A; Shareef, M Y; van Noort, R; Walsh, J M

2000-07-01

To assess the effect of different heat treatment conditions when using two different furnace types on the biaxial flexural strength (BFS) of a fluorcanasite castable glass-ceramic. Two furnace types, one a programmable furnace (PF), the other a dental laboratory burnout furnace (DLF), were used with various ceramming times to determine their effect on the BFS of a fluorcanasite castable glass-ceramic. The glass-ceramic material was cast to produce discs of 12 mm diameter and 2 mm thickness using the lost wax casting process (n = 80). After casting, both furnace types were used to ceram the discs. Half the discs were not de-vested from the casting ring before ceramming but cerammed in situ (DLF) and half were de-vested before ceramming (PF). All the discs were given a nucleation heat treatment at 520 degrees C for 1 h and then cerammed at 860 degrees C using four heat soak times (0.5, 1, 2 and 3 h). The DLF furnace had a rate of climb of 13 degrees C/min and the PF furnace had a rate of climb of 5 degrees C/min to 520 degrees C and 3 degrees C/min to 860 degrees C. After ceramming the discs were de-vested and the BFS determined using a Lloyd 2000R tester. The maximum BFS values seen for both furnace types were almost identical (280 MPa), but were achieved at different heat soak times (1 h DLF, and 2 h PF). The only significant differences in BFS values for the two furnaces were between the 0.5 and 2 h heat soak times (p < or = 0.05). Individual differences were seen between results obtained from each furnace type/heat soak times evaluated (p < or = 0.05). Already available dental laboratory burnout furnaces can be used to ceram fluorcanasite glass-ceramic castings to the same BFS values as more expensive and slower specialist programmable furnaces.

Ion implantation and fracture toughness of ceramics