WorldWideScience

Sample records for analytical techniques caracterizacion

  1. Characterization of pre-hispanic pigments by modern analytical techniques; Caracterizacion de pigmentos prehispanicos por tecnicas analiticas modernas

    Energy Technology Data Exchange (ETDEWEB)

    Ortega A, M

    2003-07-01

    In this work, the study of mural painting pigments from two archaeological sites (The Great Temple in Mexico city and Cacaxtla) was performed to know their materials composition, identify their structural characteristics and properties by using modern analytical techniques. Blue, ochre, red and black pigments of Mexica culture (1325-1521 a.C. / late Post Classic period); blue, ochre, red, brown, pink, green and white of Olmeca- Xicalanca culture (700-900 a.C. / Epiclassic period) were studied. Data about materials used, technological evolution, mineralogical background, cultural interchange and origin was obtained. Environmental exposition of these paintings since their discovering has produced changes and damage on their materials. Therefore, stability of some pigments has been notorious, ''Maya Blue'' specially presents extraordinary resistance to diluted and concentrated acids and alkalis including boiling condition, acqua regia, solvents, oxidant and reducing agents, moderate heat and biocorrosi6n; for that reason its study was emphasized. ''Maya Blue'' pigment was synthesized in laboratory using the processes described by historic sources (with indigophera suffruticosa leaves and synthetic indigo) up to obtain a stable pigment including acqua regia action. Clay matrix sorbs nearly 0.4 weight percent of organic dye, which cover 79% of palygorskita surface area. (Author)

  2. Characterization by FTIR and nuclear analytical techniques of CN{sub x} films elaborated by laser ablation; Caracterizacion por FTIR y tecnicas analiticas nucleares de peliculas de CN{sub x} elaboradas por ablacion laser

    Energy Technology Data Exchange (ETDEWEB)

    Olea M, O.F

    2003-07-01

    At the present time the technique of deposit of laser ablation is used to produce different types of thin films. At the moment in the National Institute of Nuclear Research (ININ) it is carried out an investigation on the thermoluminescent response of thin films of CN{sub x} with possible application in dosimetry of electromagnetic radiation. Under this context, the present work is part of this investigation and has as objective to characterize thin films of CN{sub x} by means of Infrared spectrometry and nuclear analytical techniques. The deposits were elaborated by laser ablation under different such experimental conditions as: pressure of Nitrogen in the system (3 x 10{sup -3} and 7.5 X 10{sup -2} Torr), Distance target-substrate (3 and 5 cm) and density of incident energy in the target (from 17.5 up to 23.8 J/cm{sup 2}). Graphite of high purity was used like target and the deposits were made on their substrates of intrinsic silicon (100). By means of infrared spectrometry by Fourier Transform (Ftir) the type of bonds which are in the structure of the films of CN{sub x} were determined. The spectra of this type of samples present in general four characteristic bands related with different types of bonds among the elements C, O, H, N such as: C-C, C-N, C-H, N-H, O-H, C=N, C{identical_to}N, among others. It was carried out a semi quantitative study of the samples isolating each band of the total infrared spectra and making a comparison between their intensities and forms. This study allowed to observe that there is a dependence of the structure of the films with regard to the time, since mainly bonds of the type Sp{sup 3} between Hydrogen and Carbon (C-H) they presented a remarkable variation in intensity, increasing as it lapsed the time until reaching to a stabilization where the bonds already not varying. This increase probably is due to the absorption of water of the atmosphere, although one has seen in the literature that the incorporation of this compound in

  3. Advanced analytical techniques

    International Nuclear Information System (INIS)

    Mrochek, J.E.; Shumate, S.E.; Genung, R.K.; Bahner, C.T.; Lee, N.E.; Dinsmore, S.R.

    1976-01-01

    The development of several new analytical techniques for use in clinical diagnosis and biomedical research is reported. These include: high-resolution liquid chromatographic systems for the early detection of pathological molecular constituents in physiologic body fluids; gradient elution chromatography for the analysis of protein-bound carbohydrates in blood serum samples, with emphasis on changes in sera from breast cancer patients; electrophoretic separation techniques coupled with staining of specific proteins in cellular isoenzymes for the monitoring of genetic mutations and abnormal molecular constituents in blood samples; and the development of a centrifugal elution chromatographic technique for the assay of specific proteins and immunoglobulins in human blood serum samples

  4. Nuclear techniques in analytical chemistry

    CERN Document Server

    Moses, Alfred J; Gordon, L

    1964-01-01

    Nuclear Techniques in Analytical Chemistry discusses highly sensitive nuclear techniques that determine the micro- and macro-amounts or trace elements of materials. With the increasingly frequent demand for the chemical determination of trace amounts of elements in materials, the analytical chemist had to search for more sensitive methods of analysis. This book accustoms analytical chemists with nuclear techniques that possess the desired sensitivity and applicability at trace levels. The topics covered include safe handling of radioactivity; measurement of natural radioactivity; and neutron a

  5. Nuclear analytical techniques in medicine

    Energy Technology Data Exchange (ETDEWEB)

    Cesareo, R.

    1988-01-01

    This book acquaints one with the fundamental principles and the instrumentation relevant to analytical technique based on atomic and nuclear physics, as well as present and future biomedical applications. Besides providing a theoretical description of the physical phenomena, a large part of the book is devoted to applications in the medical and biological field, particularly in hematology, forensic medicine and environmental science. This volume reviews methods such as the possibility of carrying out rapid multi-element analysis of trace elements on biomedical samples, in vitro and in vivo, by XRF-analysis; the ability of the PIXE-microprobe to analyze in detail and to map trace elements in fragments of biomedical samples or inside the cells; the potentiality of in vivo nuclear activation analysis for diagnostic purposes. Finally, techniques are described such as radiation scattering (elastic and inelastic scattering) and attenuation measurements which will undoubtedly see great development in the immediate future.

  6. Nuclear analytical techniques in medicine

    International Nuclear Information System (INIS)

    Cesareo, R.

    1988-01-01

    This book acquaints one with the fundamental principles and the instrumentation relevant to analytical technique based on atomic and nuclear physics, as well as present and future biomedical applications. Besides providing a theoretical description of the physical phenomena, a large part of the book is devoted to applications in the medical and biological field, particularly in hematology, forensic medicine and environmental science. This volume reviews methods such as the possibility of carrying out rapid multi-element analysis of trace elements on biomedical samples, in vitro and in vivo, by XRF-analysis; the ability of the PIXE-microprobe to analyze in detail and to map trace elements in fragments of biomedical samples or inside the cells; the potentiality of in vivo nuclear activation analysis for diagnostic purposes. Finally, techniques are described such as radiation scattering (elastic and inelastic scattering) and attenuation measurements which will undoubtedly see great development in the immediate future

  7. Hyphenated analytical techniques for materials characterisation

    Science.gov (United States)

    Armstrong, Gordon; Kailas, Lekshmi

    2017-09-01

    This topical review will provide a survey of the current state of the art in ‘hyphenated’ techniques for characterisation of bulk materials, surface, and interfaces, whereby two or more analytical methods investigating different properties are applied simultaneously to the same sample to better characterise the sample than can be achieved by conducting separate analyses in series using different instruments. It is intended for final year undergraduates and recent graduates, who may have some background knowledge of standard analytical techniques, but are not familiar with ‘hyphenated’ techniques or hybrid instrumentation. The review will begin by defining ‘complementary’, ‘hybrid’ and ‘hyphenated’ techniques, as there is not a broad consensus among analytical scientists as to what each term means. The motivating factors driving increased development of hyphenated analytical methods will also be discussed. This introduction will conclude with a brief discussion of gas chromatography-mass spectroscopy and energy dispersive x-ray analysis in electron microscopy as two examples, in the context that combining complementary techniques for chemical analysis were among the earliest examples of hyphenated characterisation methods. The emphasis of the main review will be on techniques which are sufficiently well-established that the instrumentation is commercially available, to examine physical properties including physical, mechanical, electrical and thermal, in addition to variations in composition, rather than methods solely to identify and quantify chemical species. Therefore, the proposed topical review will address three broad categories of techniques that the reader may expect to encounter in a well-equipped materials characterisation laboratory: microscopy based techniques, scanning probe-based techniques, and thermal analysis based techniques. Examples drawn from recent literature, and a concluding case study, will be used to explain the

  8. Analytical research using synchrotron radiation based techniques

    International Nuclear Information System (INIS)

    Jha, Shambhu Nath

    2015-01-01

    There are many Synchrotron Radiation (SR) based techniques such as X-ray Absorption Spectroscopy (XAS), X-ray Fluorescence Analysis (XRF), SR-Fourier-transform Infrared (SRFTIR), Hard X-ray Photoelectron Spectroscopy (HAXPS) etc. which are increasingly being employed worldwide in analytical research. With advent of modern synchrotron sources these analytical techniques have been further revitalized and paved ways for new techniques such as microprobe XRF and XAS, FTIR microscopy, Hard X-ray Photoelectron Spectroscopy (HAXPS) etc. The talk will cover mainly two techniques illustrating its capability in analytical research namely XRF and XAS. XRF spectroscopy: XRF spectroscopy is an analytical technique which involves the detection of emitted characteristic X-rays following excitation of the elements within the sample. While electron, particle (protons or alpha particles), or X-ray beams can be employed as the exciting source for this analysis, the use of X-ray beams from a synchrotron source has been instrumental in the advancement of the technique in the area of microprobe XRF imaging and trace level compositional characterisation of any sample. Synchrotron radiation induced X-ray emission spectroscopy, has become competitive with the earlier microprobe and nanoprobe techniques following the advancements in manipulating and detecting these X-rays. There are two important features that contribute to the superb elemental sensitivities of microprobe SR induced XRF: (i) the absence of the continuum (Bremsstrahlung) background radiation that is a feature of spectra obtained from charged particle beams, and (ii) the increased X-ray flux on the sample associated with the use of tunable third generation synchrotron facilities. Detection sensitivities have been reported in the ppb range, with values of 10 -17 g - 10 -14 g (depending on the particular element and matrix). Keeping in mind its demand, a microprobe XRF beamline has been setup by RRCAT at Indus-2 synchrotron

  9. Nuclear forensics: strategies and analytical techniques

    International Nuclear Information System (INIS)

    Marin, Rafael C.; Sarkis, Jorge E.S.; Pestana, Rafael C.B.

    2013-01-01

    The development of nuclear forensics as a field of science arose in response to international demand for methods to investigate the illicit trafficking of nuclear materials. After being seized, unknown nuclear material is collected and analyzed by a set of analytical methods. The fingerprints of these materials can be identified and further used during the investigations. Data interpretation is an extensive process aiming to validate the hypotheses made by the experts, and can help confirm the origin of seized nuclear materials at the end of the process or investigation. This work presents the set of measures and analytical methods that have been inherited by nuclear forensics from several fields of science. The main characteristics of these methods are evaluated and the analytical techniques employed to determine the fingerprint of nuclear materials are described. (author)

  10. Quality system implementation for nuclear analytical techniques

    International Nuclear Information System (INIS)

    2004-01-01

    techniques. The methodology provided is appropriate for: (a) Analysis of radionuclides as in alpha, beta, and gamma spectrometry for environmental and human-made radioactivity investigations; (b) Analysis of trace, minor and major elements using nuclear and related analytical techniques such as neutron activation analysis, X ray fluorescence, PIXE, etc. This training guidebook can be used by staff of analytical laboratories as a starting kit to better understand the quality assurance and quality control principles as prescribed in the ISO 17025 standard. It follows a logical order related to practical laboratory work rather than the formal clauses as given by the standard. It can be used as a stand alone textbook. However, in some cases, cross-reference is given to the ISO 17025 clauses hence it is recommended to consult the ISO standard for exact wording of specific requirements

  11. Nuclear analytical techniques in Cuban Sugar Industry

    International Nuclear Information System (INIS)

    Diaz Riso, O.; Griffith Martinez, J.

    1996-01-01

    This paper is a review concerning the applications of Nuclear Analytical Techniques in the Cuban sugar industry. The most complete elemental composition of final molasses (34 elements ) and natural zeolites (38) this last one employed as an auxiliary agent in sugar technological processes has been performed by means of Instrumental Neutron Activation Analysis (INAA) and X-Ray Fluorescence Analysis (XRFA). The trace elements sugar cane soil plant relationship and elemental composition of different types of Cuban sugar (rawr, blanco directo and refine) were also studied. As a result, valuable information referred to the possibilities of using these products in animal and human foodstuff so as in other applications are given

  12. 40 CFR 141.27 - Alternate analytical techniques.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 22 2010-07-01 2010-07-01 false Alternate analytical techniques. 141... § 141.27 Alternate analytical techniques. (a) With the written permission of the State, concurred in by the Administrator of the U.S. EPA, an alternate analytical technique may be employed. An alternate...

  13. Nuclear analytical techniques applied to forensic chemistry

    International Nuclear Information System (INIS)

    Nicolau, Veronica; Montoro, Silvia; Pratta, Nora; Giandomenico, Angel Di

    1999-01-01

    Gun shot residues produced by firing guns are mainly composed by visible particles. The individual characterization of these particles allows distinguishing those ones containing heavy metals, from gun shot residues, from those having a different origin or history. In this work, the results obtained from the study of gun shot residues particles collected from hands are presented. The aim of the analysis is to establish whether a person has shot a firing gun has been in contact with one after the shot has been produced. As reference samples, particles collected hands of persons affected to different activities were studied to make comparisons. The complete study was based on the application of nuclear analytical techniques such as Scanning Electron Microscopy, Energy Dispersive X Ray Electron Probe Microanalysis and Graphite Furnace Atomic Absorption Spectrometry. The essays allow to be completed within time compatible with the forensic requirements. (author)

  14. New analytical techniques for cuticle chemical analysis

    Energy Technology Data Exchange (ETDEWEB)

    Schulten, H.R. [Fachhochschule Fresenius, Dept. of Trace Analysis, Wiesbaden (Germany)

    1994-12-31

    1) The analytical methodology of pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and direct pyrolysis-mass spectrometry (Py-MS) using soft ionization techniques by high electric fields (FL) are briefly described. Recent advances of Py-GC/MS and Py-FIMS for the analyses of complex organic matter such as plant materials, humic substances, dissolved organic matter in water (DOM) and soil organic matter (SOM) in agricultural and forest soils are given to illustrate the potential and limitations of the applied methods. 2) Novel applications of Py-GC/MS and Py-MS in combination with conventional analytical data in an integrated, chemometric approach to investigate the dynamics of plant lipids are reported. This includes multivariate statistical investigations on maturation, senescence, humus genesis, and environmental damages in spruce ecosystems. 3) The focal point is the author`s integrated investigations on emission-induced changes of selected conifer plant constituents. Pattern recognition of Py-MS data of desiccated spruce needles provides a method for distinguishing needles damaged in different ways and determining the cause. Spruce needles were collected from both controls and trees treated with sulphur dioxide (acid rain), nitrogen dioxide, and ozone under controlled conditions. Py-MS and chemometric data evaluation are employed to characterize and classify leaves and their epicuticular waxes. Preliminary mass spectrometric evaluations of isolated cuticles of different plants such as spruce, ivy, holly, and philodendron, as well as ivy cuticles treated in vivo with air pollutants such as surfactants and pesticides are given. (orig.)

  15. New analytical techniques for cuticle chemical analysis

    International Nuclear Information System (INIS)

    Schulten, H.R.

    1994-01-01

    1) The analytical methodology of pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and direct pyrolysis-mass spectrometry (Py-MS) using soft ionization techniques by high electric fields (FL) are briefly described. Recent advances of Py-GC/MS and Py-FIMS for the analyses of complex organic matter such as plant materials, humic substances, dissolved organic matter in water (DOM) and soil organic matter (SOM) in agricultural and forest soils are given to illustrate the potential and limitations of the applied methods. 2) Novel applications of Py-GC/MS and Py-MS in combination with conventional analytical data in an integrated, chemometric approach to investigate the dynamics of plant lipids are reported. This includes multivariate statistical investigations on maturation, senescence, humus genesis, and environmental damages in spruce ecosystems. 3) The focal point is the author's integrated investigations on emission-induced changes of selected conifer plant constituents. Pattern recognition of Py-MS data of desiccated spruce needles provides a method for distinguishing needles damaged in different ways and determining the cause. Spruce needles were collected from both controls and trees treated with sulphur dioxide (acid rain), nitrogen dioxide, and ozone under controlled conditions. Py-MS and chemometric data evaluation are employed to characterize and classify leaves and their epicuticular waxes. Preliminary mass spectrometric evaluations of isolated cuticles of different plants such as spruce, ivy, holly, and philodendron, as well as ivy cuticles treated in vivo with air pollutants such as surfactants and pesticides are given. (orig.)

  16. Nuclear analytical techniques for nanotoxicology studies

    International Nuclear Information System (INIS)

    Zhang, Z.Y.; Zhao, Y.L.; Chai, Z.F.

    2011-01-01

    With the rapid development of nanotechnology and its applications, a wide variety of nanomaterials are now used in commodities, pharmaceutics, cosmetics, biomedical products, and industries. The potential interactions of nanomaterials with living systems and the environment have attracted increasing attention from the public, as well as from manufacturers of nanomaterial-based products, academic researchers and policymakers. It is important to consider the environmental, health and safety aspects at an early stage of nanomaterial development and application in order to more effectively identify and manage potential human and environmental health impacts from nanomaterial exposure. This will require research in a range of areas, including detection and characterization, environmental fate and transport, ecotoxicology and toxicology. Nuclear analytical techniques (NATs) can play an important role in such studies due to their intrinsic merits such as high sensitivity, good accuracy, high space resolution, ability to distinguish the endogenous or exogenous sources of materials, and ability of in situ and in vivo analysis. In this paper, the applications of NATs in nanotoxicological and nano-ecotoxicological studies are outlined, and some recent results obtained in our laboratory are reported. (orig.)

  17. Application of on-line analytical processing technique in accelerator

    International Nuclear Information System (INIS)

    Xie Dong; Li Weimin; He Duohui; Liu Gongfa; Xuan Ke

    2005-01-01

    A method of application of the on-line analytical processing technique in accelerator is described, which includes data pre-processing, the process of constructing of data warehouse and on-line analytical processing. (authors)

  18. Semi-analytic techniques for calculating bubble wall profiles

    International Nuclear Information System (INIS)

    Akula, Sujeet; Balazs, Csaba; White, Graham A.

    2016-01-01

    We present semi-analytic techniques for finding bubble wall profiles during first order phase transitions with multiple scalar fields. Our method involves reducing the problem to an equation with a single field, finding an approximate analytic solution and perturbing around it. The perturbations can be written in a semi-analytic form. We assert that our technique lacks convergence problems and demonstrate the speed of convergence on an example potential. (orig.)

  19. Analytical Techniques in the Pharmaceutical Sciences

    DEFF Research Database (Denmark)

    Leurs, Ulrike; Mistarz, Ulrik Hvid; Rand, Kasper Dyrberg

    2016-01-01

    Mass spectrometry (MS) offers the capability to identify, characterize and quantify a target molecule in a complex sample matrix and has developed into a premier analytical tool in drug development science. Through specific MS-based workflows including customized sample preparation, coupling to l...

  20. Analytical pervaporation: a key technique in the enological laboratory.

    Science.gov (United States)

    Luque de Castro, Maria D; Luque-García, Jose L; Mataix, Eva

    2003-01-01

    This paper reviews the use of analytical pervaporation (defined as the integration of 2 different analytical separation principles, evaporation and gas diffusion, in a single micromodule) coupled to flow-injection manifolds for the determination of analytes of interest in enology; the review discusses the advantages that these techniques can provide in wine analytical laboratories. Special attention is given to methods that enable the determination of either of 2 volatile analytes, or of one volatile analyte and one nonvolatile analyte by taking advantage of the versatility of the designed approaches. In a comparison of these methods with the official and/or standard methods, the results showed good agreement. In addition, the new methods offer improvements in linear determination range, quantitation limit, precision, rapidity, and potential for full automation. Thus, this review demonstrates that although the old technologies used in wine analytical laboratories may be supported by official and standard methods, they should be replaced by properly validated, new, and automated technologies.

  1. Analytical Techniques and the Air Force Logistics Readiness Officer

    National Research Council Canada - National Science Library

    Main, Bryan D

    2008-01-01

    .... Over 500 LROs and supervisors provided inputs. Analysis of survey responses found that Forecasting, Graphical Statistics, and Descriptive Statistics are the analytical techniques valued most by both LROs and their supervisors...

  2. An evaluation of the analytic continuation by duality technique

    CERN Document Server

    Takeuchi, T; Ignjatovic, S R; Wijewardhana, L C R

    1997-01-01

    In Nucl. Phys. B391 (1993) 127, Sundrum and Hsu estimated the value of the oblique correction parameter S for walking technicolor theories using a technique called Analytic Continuation by Duality (ACD). We apply the ACD technique to the perturbative vacuum polarization function and find that it fails to reproduce the well known result S=1/6\\pi. This brings into question the reliability of the ACD technique and the Sundrum and Hsu estimate of S.

  3. Nuclear analytical techniques for recovery of uranium from seawater

    International Nuclear Information System (INIS)

    Prasad, T.L.; Tewari, P.K.; Kalsi, P.C.; Acharya, R.; Manchanda, V.K.

    2010-01-01

    The oceans are virtually limitless reservoir of dissolved uranium in a well defined chemical environment. Various inorganic and organic adsorbents have so far been synthesized and evaluated at laboratory level using synthetic solutions with a view for the recovery of uranium from seawater. With the development of radiation processing technology, special adsorbents are synthesized by radiation grafting of amidoxime groups in the form of leaflets, which provides efficient contact patterns with water body in the sea. Bench scale experiments were initiated to develop process technology. One of the major challenges is to ensure the quality assurance by accurate measurement of heavy metal ion concentrations from lean solutions. In order to address the key issues, nuclear analytical techniques are being developed. Nuclear analytical techniques are based on nuclear properties of the trace level isotopes and have high sensitivity and accuracy and are important tools for chemical analysis. Suitable nuclear radiations (α, β, γ and n) are measured to estimate the concentration of radiation emitting isotope which in turn is used to determine the elemental concentration. In this paper, the application of Nuclear Analytical Techniques is presented. Nuclear Analytical Techniques such as Neutron Activation Analysis (NAA) technique and Solid State Nuclear Track Detection (SSNTD) methods for analyzing the concentrations of heavy metal ions from lean solutions like seawater is presented

  4. Development of analytical techniques for safeguards environmental samples at JAEA

    International Nuclear Information System (INIS)

    Sakurai, Satoshi; Magara, Masaaki; Usuda, Shigekazu; Watanabe, Kazuo; Esaka, Fumitaka; Hirayama, Fumio; Lee, Chi-Gyu; Yasuda, Kenichiro; Inagawa, Jun; Suzuki, Daisuke; Iguchi, Kazunari; Kokubu, Yoko S.; Miyamoto, Yutaka; Ohzu, Akira

    2007-01-01

    JAEA has been developing, under the auspices of the Ministry of Education, Culture, Sports, Science and Technology of Japan, analytical techniques for ultra-trace amounts of nuclear materials in environmental samples in order to contribute to the strengthened safeguards system. Development of essential techniques for bulk and particle analysis, as well as screening, of the environmental swipe samples has been established as ultra-trace analytical methods of uranium and plutonium. In January 2003, JAEA was qualified, including its quality control system, as a member of the JAEA network analytical laboratories for environmental samples. Since 2004, JAEA has conducted the analysis of domestic and the IAEA samples, through which JAEA's analytical capability has been verified and improved. In parallel, advanced techniques have been developed in order to expand the applicability to the samples of various elemental composition and impurities and to improve analytical accuracy and efficiency. This paper summarizes the trace of the technical development in environmental sample analysis at JAEA, and refers to recent trends of research and development in this field. (author)

  5. Reference materials for micro-analytical nuclear techniques

    International Nuclear Information System (INIS)

    Valkovic, V.; Zeisler, R.; Bernasconi, G.; Danesi, P.R.

    1994-01-01

    Direct application of many existing reference materials in micro-analytical procedures such as energy dispersive x-ray fluorescence (EDXRF), particle induced x-ray emission spectroscopy (PIXE) and ion probe techniques for the determination of trace elements is often impossible or difficult because: 1) other constituents present in large amounts interfere with the determination; 2) trace components are not sufficiently homogeneously distributed in the sample. Therefore specific natural-matrix reference materials containing very low levels of trace elements and having high degree of homogeneity are required for many micro-analytical procedures. In this report, selection of the types of environmental and biological materials which are suitable for micro-analytical techniques will be discussed. (author)

  6. Recent developments in analytical techniques for characterization of ...

    Indian Academy of Sciences (India)

    With continual decrease of geometries used in modern IC devices, the trace metal impurities of process materials and chemicals used in their manufacture are moving to increasingly lower levels, i.e. ng/g and pg/g levels. An attempt is made to give a brief overview of the use of different analytical techniques in the analysis of ...

  7. Improvement of Analytical Technique for Determination of Gold in ...

    African Journals Online (AJOL)

    This article elucidates the improvement of analytical technique for determination of gold in geological matrix. Samples suspected to have gold in them were subjected to neutron flux from the Nigeria Research Reactor (NRR-1), a Miniature Neutron Source Reactor (MNSR). Two geological samples – one sample was ...

  8. Synthesis and characterization of carbon fibers obtained through plasma techniques; Sintesis y caracterizacion de fibras de carbono obtenidas mediante tecnicas de plasma

    Energy Technology Data Exchange (ETDEWEB)

    Valdivia B, M

    2005-07-01

    The study of carbon, particularly the nano technology is a recent field, the one which has important implications in the science of new materials. It investigation is of great interest for industries producers of ceramic, metallurgy, electronic, energy storage, biomedicine, among others. The diverse application fields are a reason at national as international level, so that many works are focused in the production of nano fibers of carbon. The Thermal plasma applications laboratory (LAPT) of the National Institute of Nuclear Research (ININ), it is carrying out works about carbon nano technology. The present work has as purpose to carry out the synthesis and characterization of the carbon nano fibers which are obtained by electric arch of alternating current (CA) to high frequencies and by a plasma gun of non transferred arch, where are used hydrocarbons like benzene, methane, acetylene like carbon source and ferrocene, nickel, yttrium and cerium oxide like catalysts. For both techniques its were thought about a relationship among hydrocarbon-catalyst that it favored to the nano fibers production. The obtained product of each experiment outlined it was analyzed by transmission electron microscopy (TEM), scanning electron microscopy (SEM) and X-ray diffraction (XRD), analysis with those were obtained pictures and diffraction graphs, which were observed to arrive to one conclusion on the operation conditions, same analysis with those were characterized the tests carried out according to the nano structures formation of carbon. (Author)

  9. Linear circuit transfer functions an introduction to fast analytical techniques

    CERN Document Server

    Basso, Christophe P

    2016-01-01

    Linear Circuit Transfer Functions: An introduction to Fast Analytical Techniques teaches readers how to determine transfer functions of linear passive and active circuits by applying Fast Analytical Circuits Techniques. Building on their existing knowledge of classical loop/nodal analysis, the book improves and expands their skills to unveil transfer functions in a swift and efficient manner. Starting with simple examples, the author explains step-by-step how expressing circuits time constants in different configurations leads to writing transfer functions in a compact and insightful way. By learning how to organize numerators and denominators in the fastest possible way, readers will speed-up analysis and predict the frequency resp nse of simple to complex circuits. In some cases, they will be able to derive the final expression by inspection, without writing a line of algebra. Key features: * Emphasizes analysis through employing time constant-based methods discussed in other text books but not widely us...

  10. Evaluation of analytical techniques to determine matals in Sodium

    International Nuclear Information System (INIS)

    Biancifiori, M.A.; Zappa, G.; Amico, A.

    1985-01-01

    The influence of some instrumental parameters on the analysis of CA, Co, Cr, Cu, Fe, K, Mg, Mn, and Ni in Sodium solutions, by means of Flame Atomic Absorption Spectroscopy (FAAS), is evaluated. The best operating parameters are established and the possibility of application of this analytical technique to the detection of the metallic impurities in Sodium is evaluated, considering the concentration values of nuclear interest

  11. Analytical techniques for wine analysis: An African perspective; a review

    International Nuclear Information System (INIS)

    Villiers, André de; Alberts, Phillipus; Tredoux, Andreas G.J.; Nieuwoudt, Hélène H.

    2012-01-01

    Highlights: ► Analytical techniques developed for grape and wine analysis in Africa are reviewed. ► The utility of infrared spectroscopic methods is demonstrated. ► An overview of separation of wine constituents by GC, HPLC, CE is presented. ► Novel LC and GC sample preparation methods for LC and GC are presented. ► Emerging methods for grape and wine analysis in Africa are discussed. - Abstract: Analytical chemistry is playing an ever-increasingly important role in the global wine industry. Chemical analysis of wine is essential in ensuring product safety and conformity to regulatory laws governing the international market, as well as understanding the fundamental aspects of grape and wine production to improve manufacturing processes. Within this field, advanced instrumental analysis methods have been exploited more extensively in recent years. Important advances in instrumental analytical techniques have also found application in the wine industry. This review aims to highlight the most important developments in the field of instrumental wine and grape analysis in the African context. The focus of this overview is specifically on the application of advanced instrumental techniques, including spectroscopic and chromatographic methods. Recent developments in wine and grape analysis and their application in the African context are highlighted, and future trends are discussed in terms of their potential contribution to the industry.

  12. Analytical techniques for wine analysis: An African perspective; a review

    Energy Technology Data Exchange (ETDEWEB)

    Villiers, Andre de, E-mail: ajdevill@sun.ac.za [Department of Chemistry and Polymer Science, Stellenbosch University, Private Bag X1, Matieland 7602, Stellenbosch (South Africa); Alberts, Phillipus [Department of Chemistry and Polymer Science, Stellenbosch University, Private Bag X1, Matieland 7602, Stellenbosch (South Africa); Tredoux, Andreas G.J.; Nieuwoudt, Helene H. [Institute for Wine Biotechnology, Department of Viticulture and Oenology, Stellenbosch University, Private Bag X1, Matieland 7602, Stellenbosch (South Africa)

    2012-06-12

    Highlights: Black-Right-Pointing-Pointer Analytical techniques developed for grape and wine analysis in Africa are reviewed. Black-Right-Pointing-Pointer The utility of infrared spectroscopic methods is demonstrated. Black-Right-Pointing-Pointer An overview of separation of wine constituents by GC, HPLC, CE is presented. Black-Right-Pointing-Pointer Novel LC and GC sample preparation methods for LC and GC are presented. Black-Right-Pointing-Pointer Emerging methods for grape and wine analysis in Africa are discussed. - Abstract: Analytical chemistry is playing an ever-increasingly important role in the global wine industry. Chemical analysis of wine is essential in ensuring product safety and conformity to regulatory laws governing the international market, as well as understanding the fundamental aspects of grape and wine production to improve manufacturing processes. Within this field, advanced instrumental analysis methods have been exploited more extensively in recent years. Important advances in instrumental analytical techniques have also found application in the wine industry. This review aims to highlight the most important developments in the field of instrumental wine and grape analysis in the African context. The focus of this overview is specifically on the application of advanced instrumental techniques, including spectroscopic and chromatographic methods. Recent developments in wine and grape analysis and their application in the African context are highlighted, and future trends are discussed in terms of their potential contribution to the industry.

  13. Transferring an Analytical Technique from Ecology to the Sport Sciences.

    Science.gov (United States)

    Woods, Carl T; Robertson, Sam; Collier, Neil French; Swinbourne, Anne L; Leicht, Anthony S

    2018-03-01

    Learning transfer is defined as an individual's capability to apply prior learnt perceptual, motor, or conceptual skills to a novel task or performance environment. In the sport sciences, learning transfers have been investigated from an athlete-specific perspective. However, sport scientists should also consider the benefits of cross-disciplinary learning to aid critical thinking and metacognitive skill gained through the interaction with similar quantitative scientific disciplines. Using team sports performance analysis as an example, this study aimed to demonstrate the utility of a common analytical technique in ecology in the sports sciences, namely, nonmetric multidimensional scaling. To achieve this aim, three novel research examples using this technique are presented, each of which enables the analysis and visualization of athlete (organism), team (aggregation of organisms), and competition (ecosystem) behaviors. The first example reveals the technical behaviors of Australian Football League Brownlow medalists from the 2001 to 2016 seasons. The second example delineates dissimilarity in higher and lower ranked National Rugby League teams within the 2016 season. Lastly, the third example shows the evolution of game play in the basketball tournaments between the 2004 and 2016 Olympic Games. In addition to the novel findings of each example, the collective results demonstrate that, by embracing cross-disciplinary learning and drawing upon an analytical technique common to ecology, novel solutions to pertinent research questions within sports performance analysis could be addressed in a practically meaningful way. Cross-disciplinary learning may subsequently assist sport scientists in the analysis and visualization of multivariate datasets.

  14. A novel analytical technique suitable for the identification of plastics.

    Science.gov (United States)

    Nečemer, Marijan; Kump, Peter; Sket, Primož; Plavec, Janez; Grdadolnik, Jože; Zvanut, Maja

    2013-01-01

    The enormous development and production of plastic materials in the last century resulted in increasing numbers of such kinds of objects. Development of a simple and fast technique to classify different types of plastics could be used in many activities dealing with plastic materials such as packaging of food, sorting of used plastic materials, and also, if technique would be non-destructive, for conservation of plastic artifacts in museum collections, a relatively new field of interest since 1990. In our previous paper we introduced a non-destructive technique for fast identification of unknown plastics based on EDXRF spectrometry,1 using as a case study some plastic artifacts archived in the Museum in order to show the advantages of the nondestructive identification of plastic material. In order to validate our technique it was necessary to apply for this purpose the comparison of analyses with some of the analytical techniques, which are more suitable and so far rather widely applied in identifying some most common sorts of plastic materials.

  15. Characterization of the Teotihuacan mural painting: application of the external particle beam as non destructive technique; Caracterizacion de la pintura mural Teotihuacana: aplicacion de haz de particulas externo como tecnica no destructiva

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, C.; Manzanilla, L. [Instituto de Investigaciones Antropologicas, UNAM, 04510 Mexico D.F. (Mexico); Ruvalcaba, J.L. [IFUNAM, 04510 Mexico D.F. (Mexico); Ontalba, M.A. [Centro Nacional de Aceleradores, Sevilla (Spain)

    2005-07-01

    The characterization of technical indicators contained in the painting mural should follow a minim methodology from their discovery in the archaeological excavations until their analysis in the laboratory, with the purpose of rescuing diagnostic elements that mark the stages of socio cultural development in the towns. With this spirit it was carried out the present study analyzing some fragments of the Teotihuacan mural painting. The analysis consisted on applying some of the analytical techniques with particle beams used for archaeometry like the Proton induced X-ray emission (PIXE) and the particle elastic backscattering (RBS), due to it is treated of complementary techniques, very sensitive, of multielemental character, but mainly because its are non destructive analytical techniques. (Author)

  16. Optimization of analytical techniques to characterize antibiotics in aquatic systems

    International Nuclear Information System (INIS)

    Al Mokh, S.

    2013-01-01

    Antibiotics are considered as pollutants when they are present in aquatic ecosystems, ultimate receptacles of anthropogenic substances. These compounds are studied as their persistence in the environment or their effects on natural organisms. Numerous efforts have been made worldwide to assess the environmental quality of different water resources for the survival of aquatic species, but also for human consumption and health risk related. Towards goal, the optimization of analytical techniques for these compounds in aquatic systems remains a necessity. Our objective is to develop extraction and detection methods for 12 molecules of aminoglycosides and colistin in sewage treatment plants and hospitals waters. The lack of analytical methods for analysis of these compounds and the deficiency of studies for their detection in water is the reason for their study. Solid Phase Extraction (SPE) in classic mode (offline) or online followed by Liquid Chromatography analysis coupled with Mass Spectrometry (LC/MS/MS) is the most method commonly used for this type of analysis. The parameters are optimized and validated to ensure the best conditions for the environmental analysis. This technique was applied to real samples of wastewater treatment plants in Bordeaux and Lebanon. (author)

  17. The use of decision analytic techniques in energy policy decisions

    International Nuclear Information System (INIS)

    Haemaelaeinen, R.P.; Seppaelaeinen, T.O.

    1986-08-01

    The report reviews decision analytic techniques and their applications to energy policy decision making. Decision analysis consists in techniques for structuring the essential elements of a decision problem and mathematical methods for ranking the alternatives from a set of simple judgments. Because modeling subjective judgments is characteristic of decision analysis, the models can incorporate qualitative factors and values, which escape traditional energy modeling. Decision analysis has been applied to choices among energy supply alternatives, siting energy facilities, selecting nuclear waste repositories, selecting research and development projects, risk analysis and prioritizing alternative energy futures. Many applications are done in universities and research institutions, but during the 70's the use of decision analysis has spread both to the public and the private sector. The settings where decision analysis has been applied range from aiding a single decision maker to clarifying opposing points of view. Decision analytic methods have also been linked with energy models. The most valuable result of decision analysis is the clarification of the problem at hand. Political decisions cannot be made solely on the basis of models, but models can be used to gain insight of the decision situation. Models inevitably simplify reality, so they must be regarded only as aids to judgment. So far there has been only one decision analysis of energy policy issues in Finland with actual political decision makers as participants. The experiences of this project and numerous foreign applications do however suggest that the decision analytic approach is useful in energy policy questions. The report presents a number of Finnish energy policy decisions where decision analysis might prove useful. However, the applicability of the methods depends crucially on the actual circumstances at hand

  18. Analytical Technique of Selection of Constructive Parameters Pneumatichydraulic Springs

    Directory of Open Access Journals (Sweden)

    A. A. Tsipilev

    2014-01-01

    Full Text Available The article "Technique for Analytical Selection of Design Parameters of Pneumatichydraulic Springs concerns the ride smoothness of high-speed vehicles. Author of article Tsipilev A.A. is an assistant at chair "Multi-purpose Tracked Vehicles and Mobile Robots" of BMSTU. The article represents a synthesis of known information on the springing systems and an analysis of relation between spring design data and running gear. It describes standard units of running gear of vehicle in the context of springing systems. Classification of springing systems is considered. Modernization general policy for existing suspensions and prospects for creation of new ones are given. The article considers a design of various pneumatic-hydraulic springs to be set on domestic tracked vehicles. A developed technique allows us to have elastic characteristics of pneumatic-hydraulic springs of various types using these design data and kinematics of the running gear. The article provides recommendations to calculate characteristics of springing systems. The adequacy analysis of the given technique based on the comparison of real and rated characteristics of the existing suspension is conducted. This article can be useful to the experts dealing with springing systems of wheel and tracked vehicles.

  19. Nuclear Analytical Techniques for Commercial Applications in China

    International Nuclear Information System (INIS)

    Chai, Z.; Zhang, Z.; Feng, S.; Yang, J.; Ouyang, H.; Feng, X.; Mao, X.

    2013-01-01

    Since the establishment of the first Chinese nuclear reactor and accelerator in 1958, the nuclear analytical techniques (NATs) in China have dramatically developed in past half century. Nowadays 10 research nuclear reactors and over 100 small accelerators are available in China. Roughly, about 50 % of the machine time is applied for commercial purpose at the moment. The versatile nuclear analytical methods, mainly NAA, PIXE, XRF, etc., in China have been and are being applied widely and extensively in the following three fields: scientific, training, and commercial. This paper will briefly describe the past experience and present status about NATs for commercial applications. Some practical examples to demonstrate the role of NATs in this aspect will be given as well. Basically, the NATs used for the commercial applications in China can be divided into two types, i.e. off-line and on-line. The former mainly includes instrumental neutron activation analysis (INAA) for compositional determination, particle induced X-ray emission (PIXE) also for compositional analysis, accelerator-based mass-spectrometry (AMS) for analysis of C-14, Be-7, Cl-36 and other long-lived radioactive nuclides, solid state nuclear track detector

  20. Macro elemental analysis of food samples by nuclear analytical technique

    Science.gov (United States)

    Syahfitri, W. Y. N.; Kurniawati, S.; Adventini, N.; Damastuti, E.; Lestiani, D. D.

    2017-06-01

    Energy-dispersive X-ray fluorescence (EDXRF) spectrometry is a non-destructive, rapid, multi elemental, accurate, and environment friendly analysis compared with other detection methods. Thus, EDXRF spectrometry is applicable for food inspection. The macro elements calcium and potassium constitute important nutrients required by the human body for optimal physiological functions. Therefore, the determination of Ca and K content in various foods needs to be done. The aim of this work is to demonstrate the applicability of EDXRF for food analysis. The analytical performance of non-destructive EDXRF was compared with other analytical techniques; neutron activation analysis and atomic absorption spectrometry. Comparison of methods performed as cross checking results of the analysis and to overcome the limitations of the three methods. Analysis results showed that Ca found in food using EDXRF and AAS were not significantly different with p-value 0.9687, whereas p-value of K between EDXRF and NAA is 0.6575. The correlation between those results was also examined. The Pearson correlations for Ca and K were 0.9871 and 0.9558, respectively. Method validation using SRM NIST 1548a Typical Diet was also applied. The results showed good agreement between methods; therefore EDXRF method can be used as an alternative method for the determination of Ca and K in food samples.

  1. Speciation and Characterization of E-Waste, Using Analytical Techniques

    Science.gov (United States)

    López, C. Cortés; Cruz, V. E. Reyes; Rodríguez, M. A. Veloz; Ávila, J. Hernández; Badillo, J. Flores; Murcia, J. A. Cobos

    Electronic waste (e-waste), have a high potential as a source of precious metals, since they can contain metals like silver, gold, platinum, copper, zinc, nickel, tin and others. In this paper some e-waste were characterized using several analytical techniques as Scanning Electron Microscopy (SEM), X-ray diffraction (XRD) and inductively coupled plasma (ICP) in addition to the thermodynamic study by Pourbaix diagrams of silver (Ag), gold (Au), platinum (Pt), copper (Cu), nickel (Ni), tin (Sn) and zinc (Zn); considering an average low concentration of HNO3 (10% v/v). With results of the characterization was determined that the e-waste is an ideal source for the recovery of valuable metals. Similarly, the thermodynamic studies showed that it is possible to obtain all metallic species except Pt, in a potential window of 1.45V to 2.0V vs SCE.

  2. Application of multivariate techniques to analytical data on Aegean ceramics

    International Nuclear Information System (INIS)

    Bieber, A.M.; Brooks, D.W.; Harbottle, G.; Sayre, E.V.

    1976-01-01

    The general problems of data collection and handling for multivariate elemental analyses of ancient pottery are considered including such specific questions as the level of analytical precision required, the number and type of elements to be determined and the need for comprehensive multivariate statistical analysis of the collected data in contrast to element by element statistical analysis. The multivariate statistical procedures of clustering in a multidimensional space and determination of the numerical probabilities of specimens belonging to a group through calculation of the Mahalanobis distances for these specimens in multicomponent space are described together with supporting univariate statistical procedures used at Brookhaven. The application of these techniques to the data on Late Bronze Age Aegean pottery (largely previously analysed at Oxford and Brookhaven with some new specimens considered) have resulted in meaningful subdivisions of previously established groups. (author)

  3. Analytical techniques for thin films treatise on materials science and technology

    CERN Document Server

    Tu, K N

    1988-01-01

    Treatise on Materials Science and Technology, Volume 27: Analytical Techniques for Thin Films covers a set of analytical techniques developed for thin films and interfaces, all based on scattering and excitation phenomena and theories. The book discusses photon beam and X-ray techniques; electron beam techniques; and ion beam techniques. Materials scientists, materials engineers, chemical engineers, and physicists will find the book invaluable.

  4. Development of analytical techniques for water and environmental samples (2)

    Energy Technology Data Exchange (ETDEWEB)

    Eum, Chul Hun; Jeon, Chi Wan; Jung, Kang Sup; Song, Kyung Sun; Kim, Sang Yeon [Korea Institute of Geology Mining and Materials, Taejon (Korea)

    1998-12-01

    The purpose of this study is to develop new analytical methods with good detection limit for toxic inorganic and organic compounds. The analyses of CN, organic acids, particulate materials in environmental samples have been done using several methods such as Ion Chromatography, SPE, SPME, GC/MS, GC/FID, SPLITT (split-flow thin cell fractionation) during the second year of this project. Advantage and disadvantage of several distillation method (by KS, JIS, EPA) for CN analysis in wastewater were investigated. As the results, we proposed new distillation apparatus for CN analysis, which was proved to be simpler, faster and to get better recovery than conventional apparatus. And ion chromatograph/pulsed amperometric detector (IC/PAD) system instead of colorimetry for CN detection was setup to solve matrix interference. And SPE(solid phase extraction) and SPME (solid phase micro extraction) as liquid-solid extraction technique were applied to the analysis of phenols in wastewater. Optimum experimental conditions and factors influencing analytical results were determined. From these results, It could be concluded that C{sub 18} cartridge and polystyrene-divinylbenzene disk in SPE method, polyacrylate fiber in SPME were proper solid phase adsorbent for phenol. Optimum conditions to analyze phenol derivatives simultaneously were established. Also, Continuous SPLITT (Split-flow thin cell) Fractionation (CSF) is a new preparative separation technique that is useful for fractionation of particulate and macromolecular materials. CSF is carried out in a thin ribbon-like channel equipped with two splitters at both inlet and outlet of the channel. In this work, we set up a new CSF system, and tested using polystyrene latex standard particles. And then we fractionated particles contained in air and underground water based on their sedimentation coefficients using CSF. (author). 27 refs., 13 tabs., 31 figs.

  5. Quality assurance and quality control of nuclear analytical techniques

    International Nuclear Information System (INIS)

    Cincu, Emanuelathor

    2001-01-01

    Test and analytical laboratories in East and Central European countries need to prove the reliability and credibility of their economic, environmental, medical and legal decisions and their capacity of issuing reliable, verifiable reports. These demands imposed by the European Union aimed at avoiding a possible barrier to trade for the developing countries. In June 1999, in order to help Member States to develop according to EU objectives and the overall situation of the European market, IAEA launched a new co-operation programme designed to help the nuclear analytical laboratories in nuclear institutions and universities of Member States by training in the use of some Nuclear Analytical Techniques (NAT) that include: alpha, beta and gamma-ray spectrometry, radiochemical and neutron activation analysis, total reflection X-ray fluorescence. The Regional IAEA Project, named 'Quality Assurance/Quality Control of Nuclear Analytical Techniques' (NAT) aims at implementing the QA principles via a system of defined consecutive steps leading to a level on which the QA system is self-sustainable for formal accreditation or certification and satisfies the EU technical performance criteria; the requirements are in accordance with the new ISO/IEC 17025 Standard/Dec.1999 'General requirements for the competence of testing and calibration laboratories' - First edition. The Horia Hulubei National Institute for Nuclear Physics and Engineering, IFIN-HH, was admitted for participation in the IAEA Project in June 1999 account taken of its experience in the QA and metrology fields and its performance in the fields of beta and gamma-ray spectrometry, and radiochemical and neutron activation analysis, employed in both basic research and applications for external clients. Two working groups of specialists with the QA and Standardization and Metrology Departments and six analytical groups with the departments of Nuclear Applied Physics, Life Physics and Ionising Radiation Metrology are

  6. Nuclear analytical techniques for mineral exploration, mining and processing plants

    International Nuclear Information System (INIS)

    1987-01-01

    This volume is the final report from the Coordinated Research Programme and consists primarily of the research reports presented at the third meeting of the participants. The participants of the meeting considered and discussed progress and achievements made during the last three years: systems for in-stream analysis of mineral slurries, on-line determination of ash in coal using low energy gamma rays transmission and pair production techniques, in-stream determination of solids weight fraction and ash content of coal in slurries, on-line determination of moisture in coal, iron in high grade iron ores and sulfur in lead sinter, developed and tested a borehole logging system based on the spectrometric gamma-gamma method in coal, iron ore and manganese deposits, the results from the NAA and XRF analysis of the tailings and slurries exhibit the potentiality of nuclear analytical techniques in the various stages of the mining industry. A separate abstract was prepared for each of the 12 papers in this volume

  7. Product identification techniques used as training aids for analytical chemists

    Science.gov (United States)

    Grillo, J. P.

    1968-01-01

    Laboratory staff assistants are trained to use data and observations of routine product analyses performed by experienced analytical chemists when analyzing compounds for potential toxic hazards. Commercial products are used as examples in teaching the analytical approach to unknowns.

  8. Meta'omic analytic techniques for studying the intestinal microbiome.

    Science.gov (United States)

    Morgan, Xochitl C; Huttenhower, Curtis

    2014-05-01

    Nucleotide sequencing has become increasingly common and affordable, and is now a vital tool for studies of the human microbiome. Comprehensive microbial community surveys such as MetaHit and the Human Microbiome Project have described the composition and molecular functional profile of the healthy (normal) intestinal microbiome. This knowledge will increase our ability to analyze host and microbial DNA (genome) and RNA (transcriptome) sequences. Bioinformatic and statistical tools then can be used to identify dysbioses that might cause disease, and potential treatments. Analyses that identify perturbations in specific molecules can leverage thousands of culture-based isolate genomes to contextualize culture-independent sequences, or may integrate sequence data with whole-community functional assays such as metaproteomic or metabolomic analyses. We review the state of available systems-level models for studies of the intestinal microbiome, along with analytic techniques and tools that can be used to determine its functional capabilities in healthy and unhealthy individuals. Copyright © 2014 AGA Institute. Published by Elsevier Inc. All rights reserved.

  9. Characterization of pre-hispanic pigments by modern analytical techniques

    International Nuclear Information System (INIS)

    Ortega A, M.

    2003-01-01

    In this work, the study of mural painting pigments from two archaeological sites (The Great Temple in Mexico city and Cacaxtla) was performed to know their materials composition, identify their structural characteristics and properties by using modern analytical techniques. Blue, ochre, red and black pigments of Mexica culture (1325-1521 a.C. / late Post Classic period); blue, ochre, red, brown, pink, green and white of Olmeca- Xicalanca culture (700-900 a.C. / Epiclassic period) were studied. Data about materials used, technological evolution, mineralogical background, cultural interchange and origin was obtained. Environmental exposition of these paintings since their discovering has produced changes and damage on their materials. Therefore, stability of some pigments has been notorious, ''Maya Blue'' specially presents extraordinary resistance to diluted and concentrated acids and alkalis including boiling condition, acqua regia, solvents, oxidant and reducing agents, moderate heat and biocorrosi6n; for that reason its study was emphasized. ''Maya Blue'' pigment was synthesized in laboratory using the processes described by historic sources (with indigophera suffruticosa leaves and synthetic indigo) up to obtain a stable pigment including acqua regia action. Clay matrix sorbs nearly 0.4 weight percent of organic dye, which cover 79% of palygorskita surface area. (Author)

  10. Structural level characterization of base oils using advanced analytical techniques

    KAUST Repository

    Hourani, Nadim

    2015-05-21

    Base oils, blended for finished lubricant formulations, are classified by the American Petroleum Institute into five groups, viz., groups I-V. Groups I-III consist of petroleum based hydrocarbons whereas groups IV and V are made of synthetic polymers. In the present study, five base oil samples belonging to groups I and III were extensively characterized using high performance liquid chromatography (HPLC), comprehensive two-dimensional gas chromatography (GC×GC), and Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR MS) equipped with atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) sources. First, the capabilities and limitations of each analytical technique were evaluated, and then the availed information was combined to reveal compositional details on the base oil samples studied. HPLC showed the overwhelming presence of saturated over aromatic compounds in all five base oils. A similar trend was further corroborated using GC×GC, which yielded semiquantitative information on the compound classes present in the samples and provided further details on the carbon number distributions within these classes. In addition to chromatography methods, FT-ICR MS supplemented the compositional information on the base oil samples by resolving the aromatics compounds into alkyl- and naphtheno-subtituted families. APCI proved more effective for the ionization of the highly saturated base oil components compared to APPI. Furthermore, for the detailed information on hydrocarbon molecules FT-ICR MS revealed the presence of saturated and aromatic sulfur species in all base oil samples. The results presented herein offer a unique perspective into the detailed molecular structure of base oils typically used to formulate lubricants. © 2015 American Chemical Society.

  11. Contactless conductivity detection for analytical techniques — Developments from 2014 to 2016

    Czech Academy of Sciences Publication Activity Database

    Kubáň, Pavel; Hauser, P.C.

    2017-01-01

    Roč. 38, č. 1 (2017), s. 95-114 ISSN 0173-0835 R&D Projects: GA ČR(CZ) GA16-09135S Institutional support: RVO:68081715 Keywords : capacitively coupled contactless conductivity detection * capillary electrophoresis * contactless conductivity detection * analytical techniques * review Subject RIV: CB - Analytical Chemistry, Separation OBOR OECD: Analytical chemistry Impact factor: 2.744, year: 2016

  12. Applied predictive analytics principles and techniques for the professional data analyst

    CERN Document Server

    Abbott, Dean

    2014-01-01

    Learn the art and science of predictive analytics - techniques that get results Predictive analytics is what translates big data into meaningful, usable business information. Written by a leading expert in the field, this guide examines the science of the underlying algorithms as well as the principles and best practices that govern the art of predictive analytics. It clearly explains the theory behind predictive analytics, teaches the methods, principles, and techniques for conducting predictive analytics projects, and offers tips and tricks that are essential for successful predictive mode

  13. Analytical techniques and quality control in biomedical trace element research

    DEFF Research Database (Denmark)

    Heydorn, K.

    1994-01-01

    The small number of analytical results in trace element research calls for special methods of quality control. It is shown that when the analytical methods are in statistical control, only small numbers of duplicate or replicate results are needed to ascertain the absence of systematic errors...... caused by sample contamination or interference from other elements. The distribution of determinations of Cu in chorion villi from normal pregnant women is used as an example, and after screening it proved to be closely approximated by a logarithmic normal distribution with a mean value of 0.6 mg...

  14. Challenges of Using Learning Analytics Techniques to Support Mobile Learning

    Science.gov (United States)

    Arrigo, Marco; Fulantelli, Giovanni; Taibi, Davide

    2015-01-01

    Evaluation of Mobile Learning remains an open research issue, especially as regards the activities that take place outside the classroom. In this context, Learning Analytics can provide answers, and offer the appropriate tools to enhance Mobile Learning experiences. In this poster we introduce a task-interaction framework, using learning analytics…

  15. Social Data Analytics Using Tensors and Sparse Techniques

    Science.gov (United States)

    Zhang, Miao

    2014-01-01

    The development of internet and mobile technologies is driving an earthshaking social media revolution. They bring the internet world a huge amount of social media content, such as images, videos, comments, etc. Those massive media content and complicate social structures require the analytic expertise to transform those flood of information into…

  16. On numerical-analytic techniques for boundary value problems

    Czech Academy of Sciences Publication Activity Database

    Rontó, András; Rontó, M.; Shchobak, N.

    2012-01-01

    Roč. 12, č. 3 (2012), s. 5-10 ISSN 1335-8243 Institutional support: RVO:67985840 Keywords : numerical-analytic method * periodic successive approximations * Lyapunov-Schmidt method Subject RIV: BA - General Mathematics http://www.degruyter.com/view/j/aeei.2012.12.issue-3/v10198-012-0035-1/v10198-012-0035-1. xml ?format=INT

  17. Analytical techniques for the study of polyphenol-protein interactions.

    Science.gov (United States)

    Poklar Ulrih, Nataša

    2017-07-03

    This mini review focuses on advances in biophysical techniques to study polyphenol interactions with proteins. Polyphenols have many beneficial pharmacological properties, as a result of which they have been the subject of intensive studies. The most conventional techniques described here can be divided into three groups: (i) methods used for screening (in-situ methods); (ii) methods used to gain insight into the mechanisms of polyphenol-protein interactions; and (iii) methods used to study protein aggregation and precipitation. All of these methods used to study polyphenol-protein interactions are based on modifications to the physicochemical properties of the polyphenols or proteins after binding/complex formation in solution. To date, numerous review articles have been published in the field of polyphenols. This review will give a brief insight in computational methods and biosensors and cell-based methods, spectroscopic methods including fluorescence emission, UV-vis adsorption, circular dichroism, Fourier transform infrared and mass spectrometry, nuclear magnetic resonance, X-ray diffraction, and light scattering techniques including small-angle X-ray scattering and small-angle neutron scattering, and calorimetric techniques (isothermal titration calorimetry and differential scanning calorimetry), microscopy, the techniques which have been successfully used for polyphenol-protein interactions. At the end the new methods based on single molecule detection with high potential to study polyphenol-protein interactions will be presented. The advantages and disadvantages of each technique will be discussed as well as the thermodynamic, kinetic or structural parameters, which can be obtained. The other relevant biophysical experimental techniques that have proven to be valuable, such electrochemical methods, hydrodynamic techniques and chromatographic techniques will not be described here.

  18. Fluvial sediment transport: Analytical techniques for measuring sediment load

    International Nuclear Information System (INIS)

    2005-07-01

    Sediment transport data are often used for the evaluation of land surface erosion, reservoir sedimentation, ecological habitat quality and coastal sediment budgets. Sediment transport by rivers is usually considered to occur in two major ways: (1) in the flow as a suspended load and (2) along the bed as a bed load. This publication provides guidance on selected techniques for the measurement of particles moving in both modes in the fluvial environment. The relative importance of the transport mode is variable and depends on the hydraulic and sedimentary conditions. The potential user is directed in the selection of an appropriate technique through the presentation of operating principles, application guidelines and estimated costs. Techniques which require laboratory analysis are grab sample, pump sample, depth sample, point integrated and radioactive tracers. Techniques which will continuously record data are optical backscattering, nuclear transmission, single frequency acoustic and laser diffraction

  19. Analytical technique for satellite projected cross-sectional area calculation

    Science.gov (United States)

    Ben-Yaacov, Ohad; Edlerman, Eviatar; Gurfil, Pini

    2015-07-01

    Calculating the projected cross-sectional area (PCSA) of a satellite along a given direction is essential for implementing attitude control modes such as Sun pointing or minimum-drag. The PCSA may also be required for estimating the forces and torques induced by atmospheric drag and solar radiation pressure. This paper develops a new analytical method for calculating the PCSA, the concomitant torques and the satellite exposed surface area, based on the theory of convex polygons. A scheme for approximating the outer surface of any satellite by polygons is developed. Then, a methodology for calculating the projections of the polygons along a given vector is employed. The methodology also accounts for overlaps among projections, and is capable of providing the true PCSA in a computationally-efficient manner. Using the Space Autonomous Mission for Swarming and Geo-locating Nanosatellites mechanical model, it is shown that the new analytical method yields accurate results, which are similar to results obtained from alternative numerical tools.

  20. Structural Analysis of Composite Laminates using Analytical and Numerical Techniques

    Directory of Open Access Journals (Sweden)

    Sanghi Divya

    2016-01-01

    Full Text Available A laminated composite material consists of different layers of matrix and fibres. Its properties can vary a lot with each layer’s or ply’s orientation, material property and the number of layers itself. The present paper focuses on a novel approach of incorporating an analytical method to arrive at a preliminary ply layup order of a composite laminate, which acts as a feeder data for the further detailed analysis done on FEA tools. The equations used in our MATLAB are based on analytical study code and supply results that are remarkably close to the final optimized layup found through extensive FEA analysis with a high probabilistic degree. This reduces significant computing time and saves considerable FEA processing to obtain efficient results quickly. The result output by our method also provides the user with the conditions that predicts the successive failure sequence of the composite plies, a result option which is not even available in popular FEM tools. The predicted results are further verified by testing the laminates in the laboratory and the results are found in good agreement.

  1. Measuring efficiency in health care: analytic techniques and health policy

    National Research Council Canada - National Science Library

    Smith, Peter C; Street, Andrew; Jacobs, Rowena

    2006-01-01

    ... the efficiency of systems and organisations, including data envelopment analysis and stochastic frontier analysis, and also presents some promising new methodological approaches. Such techniques offer the prospect of many new and fruitful insights into health care performance. Nevertheless, they also pose many practical and methodological c...

  2. Applications of nuclear analytical techniques to the Geology

    International Nuclear Information System (INIS)

    Aspiazu F, J.A.; Lopez M, J.; Ramirez T, J.J.; Montero M, E.; Villasenor S, P.

    2001-01-01

    It is applied the PIXE technique for to measure the ratio Sr/Ca in different stages of the stalactite growth. As the ratio depends of the temperature, information about the variations of atmospheric temperature along thousand of years is obtained. (Author)

  3. An Analytical Study of Tools and Techniques for Movie Marketing

    Directory of Open Access Journals (Sweden)

    Garima Maik

    2014-08-01

    Full Text Available Abstract. Bollywood or Hindi movie industry is one of the fastest growing sector in the media and entertainment space creating numerous business and employment opportunities. Movies in India are a major source of entertainment for all sects of society. They not only face competition from other movie industries and movies but from other source of entertainment such as adventure sports, amusement parks, theatre and drama, pubs and discothèques. A lot of man power, man hours, creative brains, and money are put in to build a quality feature film. Bollywood is the industry which continuously works towards providing the 7 billion population with something new always. So it is important for the movie and production team to stand out, to grab the due attention of the maximum audience. Movie makers employ various tools and techniques today to market their movies. They leave no stone unturned. They roll out teasers, First look, Theatrical trailer release, Music launch, City tours, Producer’s and director’s interview, Movie premier, Movie release, post release follow up and etc. to pull the viewers to the Cineplex. The audience today which comprises mainly of youth requires photos, videos, meet ups, gossip, debate, collaboration and content creation. These requirements of today’s generation are most fulfilled through digital platforms. However, the traditional media like newspapers, radio, and television are not old school. They reach out to mass audience and play an upper role in effective marketing. This study aims at analysing these tools for their effectiveness. The objectives are fulfilled through a consumer survey. This study will bring out the effectiveness and relational importance of various tools which are employed by movie marketers to generate maximum returns on the investments by using various data reduction techniques like factor analysis and statistical techniques like chi-square test with data visualization using pie charts

  4. Application of thermo-analytical techniques in nuclear waste management

    International Nuclear Information System (INIS)

    Raje, Naina; Ghonge, Darshana K.; Reddy, A.V.R.

    2015-01-01

    Sodium nitrate solution is the byproduct of nuclear fuel reprocessing plant. It is produced during the neutralization of nitric acid received through purex process and stored in tanks or immobilized in bitumen/cement at site as waste packets. In order to minimize the environmental impact due to these waste packets, it is desirable to reduce nitrate ion to harmless gases like nitrogen. Biodegradation, ion exchange, electrodialysis and chemical treatment are the methods for nitrate reduction in the case of non nuclear industrial waste. Chemical treatment seems to be the most viable process to treat the waste from nuclear reprocessing plant in comparison to the other methods used for the non nuclear industrial waste. During chemical treatment, the nitrate ions can be converted to nitrogen by using a suitable reductant in presence of a catalyst. Formaldehyde has been chosen as the reducing agent for the nitrate - nitrogen conversion and in the process, formaldehyde gets converted to formic acid. In order to optimize the reduction process, it is essential to determine the formaldehyde and formic acid content in the waste feed solution and no direct analytical methodology is available for the same. Present work describes the attempts made to apply evolved gas analysis for understanding the mechanism of conversion of formaldehyde to formic acid. The developed method can be applied for the qualitative/quantitative determination of formaldehyde and formic acid in the waste feed solution. Waste feed samples were received from PSDD, BARC

  5. Chemometric classification techniques as a tool for solving problems in analytical chemistry.

    Science.gov (United States)

    Bevilacqua, Marta; Nescatelli, Riccardo; Bucci, Remo; Magrì, Andrea D; Magrì, Antonio L; Marini, Federico

    2014-01-01

    Supervised pattern recognition (classification) techniques, i.e., the family of chemometric methods whose aim is the prediction of a qualitative response on a set of samples, represent a very important assortment of tools for solving problems in several areas of applied analytical chemistry. This paper describes the theory behind the chemometric classification techniques most frequently used in analytical chemistry together with some examples of their application to real-world problems.

  6. Function of nuclear analytical techniques in Interuniverinteruniversity research cooperation

    International Nuclear Information System (INIS)

    Houtman, J.P.W.

    1977-01-01

    The interuniversity institute was established in 1957 with the instruction to use its major research tool - the nuclear research reactor - in cooperation with and for the benefit of all universities in the Netherlands. Developments in the institute have resulted in two forms of neutron activation analysis currently applied on routine basis. A highly sophisticated automated instrumental multi-element analysis is mostly applied to samples containing elements in the ppm-range and in which no strongly dominating activity is formed. These conditions are fulfilled in general for silicous materials as encountered in geological and archeological samples and in soils and sediments. An automated destructive multi-element analysis involving chemical separations is used for samples with element concentrations in the ppb-range containing some type of dominating activities. This occurs in biological and environmental samples where Na, Fe and Br are mostly available in high concentrations. The institute has been asked many times to help in setting up radio-tracer experiments in various fields including analytical chemistry (isotope dilution, radio immuno assay), physical chemistry (adsorption, diffusion and exchange reactions between solids and liquids during crystallization, corrosion), chemical engineering (determination of contact times and their distribution), biomedical engineering (diffusion processes in membranes for artificial kidneys), biology (uptake of chemical by fish, measurement of displacement habits of animals) etc. Special attention is being paid to the behaviour of trace-elements in metabolic processes, which has been initiated by the medical interest in pathological deviations of copper metabolism in Wilson's and Menkes' diseases. (T.G.)

  7. Analytical techniques for measurement of 99Tc in environmental samples

    International Nuclear Information System (INIS)

    Anon.

    1979-01-01

    Three new methods have been developed for measuring 99 Tc in environmental samples. The most sensitive method is isotope dilution mass spectrometry, which allows measurement of about 1 x 10 -12 grams of 99 Tc. Results on analysis of five samples by this method compare very well with values obtained by a second independent method, which involves counting of beta particles from 99 Tc and internal conversion electrons from /sup 97m/Tc. A third method involving electrothermal atomic absorption has also been developed. Although this method is not as sensitive as the first two techniques, the cost per analysis is expected to be considerably less for certain types of samples

  8. Analytical techniques applied to study cultural heritage objects

    International Nuclear Information System (INIS)

    Rizzutto, M.A.; Curado, J.F.; Bernardes, S.; Campos, P.H.O.V.; Kajiya, E.A.M.; Silva, T.F.; Rodrigues, C.L.; Moro, M.; Tabacniks, M.; Added, N.

    2015-01-01

    The scientific study of artistic and cultural heritage objects have been routinely performed in Europe and the United States for decades. In Brazil this research area is growing, mainly through the use of physical and chemical characterization methods. Since 2003 the Group of Applied Physics with Particle Accelerators of the Physics Institute of the University of Sao Paulo (GFAA-IF) has been working with various methodologies for material characterization and analysis of cultural objects. Initially using ion beam analysis performed with Particle Induced X-Ray Emission (PIXE), Rutherford Backscattering (RBS) and recently Ion Beam Induced Luminescence (IBIL), for the determination of the elements and chemical compounds in the surface layers. These techniques are widely used in the Laboratory of Materials Analysis with Ion Beams (LAMFI-USP). Recently, the GFAA expanded the studies to other possibilities of analysis enabled by imaging techniques that coupled with elemental and compositional characterization provide a better understanding on the materials and techniques used in the creative process in the manufacture of objects. The imaging analysis, mainly used to examine and document artistic and cultural heritage objects, are performed through images with visible light, infrared reflectography (IR), fluorescence with ultraviolet radiation (UV), tangential light and digital radiography. Expanding more the possibilities of analysis, new capabilities were added using portable equipment such as Energy Dispersive X-Ray Fluorescence (ED-XRF) and Raman Spectroscopy that can be used for analysis 'in situ' at the museums. The results of these analyzes are providing valuable information on the manufacturing process and have provided new information on objects of different University of Sao Paulo museums. Improving the arsenal of cultural heritage analysis it was recently constructed an 3D robotic stage for the precise positioning of samples in the external beam setup

  9. Advanced analytical techniques: platform for nano materials science

    International Nuclear Information System (INIS)

    Adams, F.; Van Vaeck, L.; Barrett, R.

    2005-01-01

    This paper reviews a range of instrumental microanalytical techniques for their potential in following the development of nanotechnology. Needs for development in secondary ion mass spectrometry (SIMS), transmission electron microscopy (TEM), Auger emission spectrometry (AES) laser mass spectrometry, X-ray photon spectroscopy are discussed as well as synchrotron-based methods for analysis. Objectives for development in all these areas for the coming 5 years are defined. Developments of instrumentation in three European synchrotron installations are given as examples of ongoing development in this field

  10. Analytical techniques applied to study cultural heritage objects

    Energy Technology Data Exchange (ETDEWEB)

    Rizzutto, M.A.; Curado, J.F.; Bernardes, S.; Campos, P.H.O.V.; Kajiya, E.A.M.; Silva, T.F.; Rodrigues, C.L.; Moro, M.; Tabacniks, M.; Added, N., E-mail: rizzutto@if.usp.br [Universidade de Sao Paulo (USP), SP (Brazil). Instituto de Fisica

    2015-07-01

    The scientific study of artistic and cultural heritage objects have been routinely performed in Europe and the United States for decades. In Brazil this research area is growing, mainly through the use of physical and chemical characterization methods. Since 2003 the Group of Applied Physics with Particle Accelerators of the Physics Institute of the University of Sao Paulo (GFAA-IF) has been working with various methodologies for material characterization and analysis of cultural objects. Initially using ion beam analysis performed with Particle Induced X-Ray Emission (PIXE), Rutherford Backscattering (RBS) and recently Ion Beam Induced Luminescence (IBIL), for the determination of the elements and chemical compounds in the surface layers. These techniques are widely used in the Laboratory of Materials Analysis with Ion Beams (LAMFI-USP). Recently, the GFAA expanded the studies to other possibilities of analysis enabled by imaging techniques that coupled with elemental and compositional characterization provide a better understanding on the materials and techniques used in the creative process in the manufacture of objects. The imaging analysis, mainly used to examine and document artistic and cultural heritage objects, are performed through images with visible light, infrared reflectography (IR), fluorescence with ultraviolet radiation (UV), tangential light and digital radiography. Expanding more the possibilities of analysis, new capabilities were added using portable equipment such as Energy Dispersive X-Ray Fluorescence (ED-XRF) and Raman Spectroscopy that can be used for analysis 'in situ' at the museums. The results of these analyzes are providing valuable information on the manufacturing process and have provided new information on objects of different University of Sao Paulo museums. Improving the arsenal of cultural heritage analysis it was recently constructed an 3D robotic stage for the precise positioning of samples in the external beam setup

  11. Real-time analytics techniques to analyze and visualize streaming data

    CERN Document Server

    Ellis, Byron

    2014-01-01

    Construct a robust end-to-end solution for analyzing and visualizing streaming data Real-time analytics is the hottest topic in data analytics today. In Real-Time Analytics: Techniques to Analyze and Visualize Streaming Data, expert Byron Ellis teaches data analysts technologies to build an effective real-time analytics platform. This platform can then be used to make sense of the constantly changing data that is beginning to outpace traditional batch-based analysis platforms. The author is among a very few leading experts in the field. He has a prestigious background in research, development,

  12. Modern trends: analytical chemistry - techniques and application to biodetection

    International Nuclear Information System (INIS)

    Khurshid, S.J.

    1993-01-01

    Microorganism isolated from specimens are usually identified by conventional bacterial identification procedures of morphological evaluation and cultural techniques. These complex methods of studying organisms are extremely tedious and time consuming. This causes serious problems by delaying the decision concerning the presence of pathogens and therefore the adequate drug therapy. Frequently, the decision about the presence of pathogens has to be made prior to the results of microbiological tests. In order to overcome these conditions, workers explored new instrumental methods for characterization, rapid acquisition, high reproducibility, computer aided data recording and interpretation of microorganisms. This article brief reviews application of these modern instrumental approaches such as Infrared Spectroscopy (IR), Gas Chromatography (GC), Fluorescence Spectroscopy, Bioluminescence, Chemiluminescence, FLow Cytometry, Micro calorimetry, GC-MASS Spectrometry, Electrical Impedance, Bio sensors and Radiometry. These techniques have increased the capacity of doing basic research with a major impact on both the clinical laboratories and industry. The radiometric procedure is being used for research and biological quality control of radiopharmaceuticals in our laboratory at PINSTECH. (author)

  13. New analytical techniques to facilitate preformulation screening in propellant systems.

    Science.gov (United States)

    Mogalian, Erik; Kuehl, Philip J; Myrdal, Paul B

    2007-08-01

    The objective of these studies was to investigate the applicability of an online direct inject HPLC method for the preformulation screening of pharmaceutical agents in pressurized metered dose inhalers (MDIs). The technique was initially utilized for the solubility determination of solid solutes. This study explores the extension of the online direct inject method for the evaluation of drug stability in propellant systems as well as for the analysis of MDI vials crimped with metered valves. Through-life content analysis confirmed that a single vial may be repeatedly sampled, thus facilitating the stability evaluation of a single unit over time. The method was successfully used for evaluating the stability of a model drug, as a function of several different formulation configurations, with minimal sample numbers. Additionally, studies determined that after modifications were made to the injection coupler, the technique was also feasible for use with 50 and 100 microL metered valves, however further modifications are necessary for 25 microL valves.

  14. Mapping the Complexities of Online Dialogue: An Analytical Modeling Technique

    Directory of Open Access Journals (Sweden)

    Robert Newell

    2014-03-01

    Full Text Available The e-Dialogue platform was developed in 2001 to explore the potential of using the Internet for engaging diverse groups of people and multiple perspectives in substantive dialogue on sustainability. The system is online, text-based, and serves as a transdisciplinary space for bringing together researchers, practitioners, policy-makers and community leaders. The Newell-Dale Conversation Modeling Technique (NDCMT was designed for in-depth analysis of e-Dialogue conversations and uses empirical methodology to minimize observer bias during analysis of a conversation transcript. NDCMT elucidates emergent ideas, identifies connections between ideas and themes, and provides a coherent synthesis and deeper understanding of the underlying patterns of online conversations. Continual application and improvement of NDCMT can lead to powerful methodologies for empirically analyzing digital discourse and better capture of innovations produced through such discourse. URN: http://nbn-resolving.de/urn:nbn:de:0114-fqs140221

  15. Investigation of ceramic devices by analytical electron microscopy techniques

    International Nuclear Information System (INIS)

    Shiojiri, M.; Saijo, H.; Isshiki, T.; Kawasaki, M.; Yoshioka, T.; Sato, S.; Nomura, T.

    1999-01-01

    Ceramics are widely used as capacitors and varistors. Their electrical properties depend on the structure, which is deeply influenced not only by the composition of raw materials and additives but also by heating treatments in the production process. This paper reviews our investigations of SrTiO 3 ceramic devices, which have been performed using various microscopy techniques such as high-resolution transmission electron microscopy (HRTEM), cathodoluminescence scanning electron microscopy (CLSEM), field emission SEM (FE-SEM), energy dispersive X-ray spectroscopy (EDS), electron energy-loss spectroscopy (EELS) and high angle annular dark field (HAADF) imaging method in a FE-(scanning) transmission electron microscope(FE-(S)TEM). (author)

  16. Analytical vs. Simulation Solution Techniques for Pulse Problems in Non-linear Stochastic Dynamics

    DEFF Research Database (Denmark)

    Iwankiewicz, R.; Nielsen, Søren R. K.

    of the problem, i.e. the number of state variables of the dynamical systems. In contrast, the application of the simulation techniques is not limited to Markov problems, nor is it dependent on the mean rate of impulses. Moreover their use is straightforward for a large class of point processes, at least......Advantages and disadvantages of available analytical and simulation techniques for pulse problems in non-linear stochastic dynamics are discussed. First, random pulse problems, both those which do and do not lead to Markov theory, are presented. Next, the analytical and analytically......-numerical techniques suitable for Markov response problems such as moments equation, Petrov-Galerkin and cell-to-cell mapping techniques are briefly discussed. Usefulness of these techniques is limited by the fact that effectiveness of each of them depends on the mean rate of impulses. Another limitation is the size...

  17. ANALYTICAL TECHNIQUES FOR THE DETERMINATION OF MELOXICAM IN PHARMACEUTICAL FORMULATIONS AND BIOLOGICAL SAMPLES

    Directory of Open Access Journals (Sweden)

    Aisha Noreen

    2016-06-01

    Full Text Available Meloxicam (MX belongs to the family of oxicams which is the most important group of non steroidal anti-inflammatory drugs (NSAIDs and is widely used for their analgesics and antipyretic activities. It inhibits both COX-I and COX-II enzymes with less gastric and local tissues irritation. A number of analytical techniques have been used for the determination of MX in pharmaceutical as well as in biological fluids. These techniques include titrimetry, spectrometry, chromatography, flow injection spectrometry, fluorescence spectrometry, capillary zone electrophoresis and electrochemical techniques. Many of these techniques have also been used for the simultaneous determination of MX with other compounds. A comprehensive review of these analytical techniques has been done which could be useful for the analytical chemists and quality control pharmacists.

  18. Trends in analytical techniques applied to particulate matter characterization: A critical review of fundaments and applications.

    Science.gov (United States)

    Galvão, Elson Silva; Santos, Jane Meri; Lima, Ana Teresa; Reis, Neyval Costa; Orlando, Marcos Tadeu D'Azeredo; Stuetz, Richard Michael

    2018-05-01

    Epidemiological studies have shown the association of airborne particulate matter (PM) size and chemical composition with health problems affecting the cardiorespiratory and central nervous systems. PM also act as cloud condensation nuclei (CNN) or ice nuclei (IN), taking part in the clouds formation process, and therefore can impact the climate. There are several works using different analytical techniques in PM chemical and physical characterization to supply information to source apportionment models that help environmental agencies to assess damages accountability. Despite the numerous analytical techniques described in the literature available for PM characterization, laboratories are normally limited to the in-house available techniques, which raises the question if a given technique is suitable for the purpose of a specific experimental work. The aim of this work consists of summarizing the main available technologies for PM characterization, serving as a guide for readers to find the most appropriate technique(s) for their investigation. Elemental analysis techniques like atomic spectrometry based and X-ray based techniques, organic and carbonaceous techniques and surface analysis techniques are discussed, illustrating their main features as well as their advantages and drawbacks. We also discuss the trends in analytical techniques used over the last two decades. The choice among all techniques is a function of a number of parameters such as: the relevant particles physical properties, sampling and measuring time, access to available facilities and the costs associated to equipment acquisition, among other considerations. An analytical guide map is presented as a guideline for choosing the most appropriated technique for a given analytical information required. Copyright © 2018 Elsevier Ltd. All rights reserved.

  19. Air pollution in Thailand using nuclear-related analytical techniques

    International Nuclear Information System (INIS)

    Leelhaphunt, N.; Chueinta, W.

    1994-01-01

    The methods of neutron activation, both instrumental and radiochemical, and atomic absorption spectrophotometry are used in a study of the concentrations of Al, As, Br, Cd, Cl, Co, Cr, Cu, Fe, Hg, Mn, Sb, Sc, Se, Si, V, Zn and Pb in airborne particulate matter collected from 7 permanent and 9 temporary air quality monitoring stations. The location of the stations are urban residential, suburban residential, mixed (commercial and residential), commercial and industrial areas and near major roads in Bangkok Metropolitan areas. Air sampling is performed once a month for 24 hours continuously using the high volume air sampler (GMW 2000 H) and for 5, 10, and 15 days continuously using an Anderson Air Sampler (SIBATA AN-200). The elements As, Cd and Cu are determined destructively using ion exchange chromatography while Hg and Se are determined by the dry combustion technique. The determination of Pb was done by atomic absorption spectrophotometry. The results of Pb concentrations in airborne particulate matters, collected during 1987 to 1991, were reported by the Office of the National Environment Board. Levels of Pb content were found to be lower than the National Ambient Air Quality Standards. (author). 3 refs, 4 tabs

  20. Political Learning During a Campaign: Micro- and Macro-Analytic Research Techniques.

    Science.gov (United States)

    Graber, Doris A.

    Research techniques for measuring political learning during a campaign are examined. Micro-analytic techniques involve intensive analysis of individuals. Large amounts of data on the psychological and sociological settings of subjects are gathered, along with information on opinions toward past and emerging political situations. Macro-analytic…

  1. Application of metabonomic analytical techniques in the modernization and toxicology research of traditional Chinese medicine.

    Science.gov (United States)

    Lao, Yong-Min; Jiang, Jian-Guo; Yan, Lu

    2009-08-01

    In the recent years, a wide range of metabonomic analytical techniques are widely used in the modern research of traditional Chinese medicine (TCM). At the same time, the international community has attached increasing importance to TCM toxicity problems. Thus, many studies have been implemented to investigate the toxicity mechanisms of TCM. Among these studies, many metabonomic-based methods have been implemented to facilitate TCM toxicity investigation. At present, the most prevailing methods for TCM toxicity research are mainly single analysis techniques using only one analytical means. These techniques include nuclear magnetic resonance (NMR), gas chromatography-mass spectrometry (GC-MS), and liquid chromatography-mass spectrometry (LC-MS), etc.; with these techniques, some favourable outcomes have been gained in the toxic reaction studies of TCM, such as the action target organs assay, the establishment of action pattern, the elucidation of action mechanism and the exploration of action material foundation. However, every analytical technique has its advantages and drawbacks, no existing analytical technique can be versatile. Multi-analysed techniques can partially overcome the shortcomings of single-analysed techniques. Combination of GC-MS and LC-MS metabolic profiling approaches has unravelled the pathological outcomes of aristolochic acid-induced nephrotoxicity, which can not be achieved by single-analysed techniques. It is believed that with the further development of metabonomic analytical techniques, especially multi-analysed techniques, metabonomics will greatly promote TCM toxicity research and be beneficial to the modernization of TCM in terms of extending the application of modern means in the TCM safety assessment, assisting the formulation of TCM safety norms and establishing the international standards indicators.

  2. Recent developments and future trends in solid phase microextraction techniques towards green analytical chemistry.

    Science.gov (United States)

    Spietelun, Agata; Marcinkowski, Łukasz; de la Guardia, Miguel; Namieśnik, Jacek

    2013-12-20

    Solid phase microextraction find increasing applications in the sample preparation step before chromatographic determination of analytes in samples with a complex composition. These techniques allow for integrating several operations, such as sample collection, extraction, analyte enrichment above the detection limit of a given measuring instrument and the isolation of analytes from sample matrix. In this work the information about novel methodological and instrumental solutions in relation to different variants of solid phase extraction techniques, solid-phase microextraction (SPME), stir bar sorptive extraction (SBSE) and magnetic solid phase extraction (MSPE) is presented, including practical applications of these techniques and a critical discussion about their advantages and disadvantages. The proposed solutions fulfill the requirements resulting from the concept of sustainable development, and specifically from the implementation of green chemistry principles in analytical laboratories. Therefore, particular attention was paid to the description of possible uses of novel, selective stationary phases in extraction techniques, inter alia, polymeric ionic liquids, carbon nanotubes, and silica- and carbon-based sorbents. The methodological solutions, together with properly matched sampling devices for collecting analytes from samples with varying matrix composition, enable us to reduce the number of errors during the sample preparation prior to chromatographic analysis as well as to limit the negative impact of this analytical step on the natural environment and the health of laboratory employees. Copyright © 2013 Elsevier B.V. All rights reserved.

  3. Toward greener analytical techniques for the absolute quantification of peptides in pharmaceutical and biological samples.

    Science.gov (United States)

    Van Eeckhaut, Ann; Mangelings, Debby

    2015-09-10

    Peptide-based biopharmaceuticals represent one of the fastest growing classes of new drug molecules. New reaction types included in the synthesis strategies to reduce the rapid metabolism of peptides, along with the availability of new formulation and delivery technologies, resulted in an increased marketing of peptide drug products. In this regard, the development of analytical methods for quantification of peptides in pharmaceutical and biological samples is of utmost importance. From the sample preparation step to their analysis by means of chromatographic or electrophoretic methods, many difficulties should be tackled to analyze them. Recent developments in analytical techniques emphasize more and more on the use of green analytical techniques. This review will discuss the progresses in and challenges observed during green analytical method development for the quantification of peptides in pharmaceutical and biological samples. Copyright © 2015 Elsevier B.V. All rights reserved.

  4. An analytical simulation technique for cone-beam CT and pinhole SPECT

    International Nuclear Information System (INIS)

    Zhang Xuezhu; Qi Yujin

    2011-01-01

    This study was aimed at developing an efficient simulation technique with an ordinary PC. The work involved derivation of mathematical operators, analytic phantom generations, and effective analytical projectors developing for cone-beam CT and pinhole SPECT imaging. The computer simulations based on the analytical projectors were developed by ray-tracing method for cone-beam CT and voxel-driven method for pinhole SPECT of degrading blurring. The 3D Shepp-Logan, Jaszczak and Defrise phantoms were used for simulation evaluations and image reconstructions. The reconstructed phantom images were of good accuracy with the phantoms. The results showed that the analytical simulation technique is an efficient tool for studying cone-beam CT and pinhole SPECT imaging. (authors)

  5. Industrial and environmental applications of nuclear analytical techniques. Report of a workshop

    International Nuclear Information System (INIS)

    1999-11-01

    The IAEA has programme the utilisation of nuclear analytical techniques (NATs), in particular for industrial and environmental applications. A major purpose is to help the developing Member States apply their analytical capabilities optimally for socio-economic progress and development. A large number of institutions in Europe, Africa, Latin America and Asia have established X ray fluorescence (XRF) and gamma ray measurement techniques and facilities for neutron activation analysis (NAA) have been initiated in institutions in these regions. Moreover, there is a growing interest among many institutes in applying more advanced analytical techniques, such as particle induced X ray emission (PIXE) and microanalytical techniques based on X ray emission induced by conventional sources or synchrotron radiation to the analysis of environmental and biological materials and industrial products. In order to define new areas of application of NATs and to extend the range of these techniques, a number of initiatives have recently been taken. It includes a workshop on industrial and environmental applications of nuclear analytical techniques, organized by the IAEA in Vienna, 7-11 September 1998. The main objectives of the workshop were as follows: (1) to review recent applications of NATs in industrial and environmental studies; (2) to identify emerging trends in methodologies and applications of NATs; (3) to demonstrate analytical capabilities of selected NATs. The following topics were reviewed during the workshop: (1) XRF and accelerator based analytical techniques; (2) portable XRF systems and their applications in industry, mineral prospecting and processing, (3) portable gamma ray spectrometers; and (4) NAA and its applications in industry and environmental studies. Micro-XRF and micro-PIXE methods and their applications in the above fields were also discussed, including aspects of synchrotron radiation induced X ray emission

  6. Pumping systems characterization; Caracterizacion de los sistemas de bombeo

    Energy Technology Data Exchange (ETDEWEB)

    Torres Gutierrez, R. [Eficiencia Energetica, S.A. de C.V., Mexico, D. F. (Mexico)

    1995-12-31

    In this paper the characterization of the pumping systems is discussed, and an explanation is given of the need of evaluating in detail the possibility of implementing the frequency variators as an option for energy conservation, explaining how the simple use of the similarity or affinity laws lead to over-estimate the saving. [Espanol] En este articulo se describe la caracterizacion de los sistemas de bombeo y se explica la necesidad de evaluar en detalle la posibilidad de implementacion de variadores de frecuencia, como una alternativa para el ahorro de energia, explicando como el simple uso de las leyes de semejanza o afinidad llevan a sobre-evaluar los ahorros.

  7. Analytical techniques

    International Nuclear Information System (INIS)

    Alexander, G.V.; McAnulty, L.T.

    1976-01-01

    Optical emission spectroscopy was conducted on 20,000 biological specimens for metallic trace elements. Determinations of 13 C in biological tissues were made by charged particle activation, and carrier-free 123 I was isolated from proton irradiated 124 Te

  8. Characterization of the Plasma Edge for Technique of Atomic Helium Beam in the CIEMAT Fusion Device; Caracterizacion del Borde del Plasma del Dispositivo de Fusion TJ-II del CIEMAT mediante el Diagnostico del Haz Supersonico de Helio

    Energy Technology Data Exchange (ETDEWEB)

    Hidalgo, A.

    2003-07-01

    In this report, the measurement of Electron Temperature and Density in the Boundary Plasma of TJ-II with a Supersonic Helium Beam Diagnostic and work devoted to the upgrading of this technique are described. Also, simulations of Laser Induced Fluorescence (LIF) studies of level populations of electronically excited He atoms are shown. This last technique is now being installed in the CIEMAT fusion device. (Author ) 36 refs.

  9. Role of thermo-analytical techniques in compositional characterization of nuclear materials

    International Nuclear Information System (INIS)

    Raje, Naina

    2015-01-01

    The study of heat effects on different materials has a long history. Extraction of metals from the ores, pottery production, glasses making etc. are the examples, where the performance of products obtained from raw materials depends on the processing temperatures. Concrete, pottery, bricks etc., are severely damaged due to uncontrolled high temperatures. Therefore, the heating of raw materials in controlled manner is of pivotal importance to get products of the desired quality. Thermo-analytical techniques provide the information on the effect of heat under controlled heating conditions. In thermo-analytical techniques, physical properties of materials are measured as a function of temperature. Simultaneous thermo-analytical techniques are beneficial in comparison to any single thermo-analytical technique. Simultaneous techniques refer to the measurement of two or more signals on the same sample at the same time in the same instrument. Nowadays, simultaneous thermo-analytical technique are extensively in use for the analysis of materials. Ammonium diuranate (ADU) and magnesium diuranate (MDU), also known as yellowcake, are intermediate precursors in fuel fabrication process, with stringent specifications along with the need to understand its thermal behavior. In the processing of lowgrade ores, higher levels of impurities are being encountered in the leach solution that affects the properties of ADU/MDU. In order to meet the fuel specifications, quality assurance of these nuclear materials is essential. Current studies describe the application of simultaneous Thermogravimetry (TG) - differential thermal analysis (DTA) - evolved gas analysis (EGA) techniques for the compositional characterization of ADU/MDU with respect to the impurities present in the matrices

  10. Microstructural characterization of TiAl{sub 3} intermetallic obtained by the Fast solidification technique; Caracterizacion microestructural del intermetalico TiAl{sub 3} obtenida por la tecnica de solidificacion rapida

    Energy Technology Data Exchange (ETDEWEB)

    Angeles C, C.; Rosas, G.; Perez C, R. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    1997-07-01

    In this work preliminary studies about the TiAl{sub 3} characterization are reported which is obtained starting from the Fast solidification technique in an arc furnace using Scanning electron microscopy, X-ray diffraction and Transmission electron microscopy. (Author)

  11. Field analytical techniques for mercury in soils technology evaluation. Topical report, November 1994--March 1997

    Energy Technology Data Exchange (ETDEWEB)

    Solc, J.; Harju, J.A.; Grisanti, A.A.

    1998-02-01

    This report presents the evaluation of the four field analytical techniques for mercury detection in soils, namely (1) an anodic stripping voltametry technique (ASV) developed and tested by General Electric Corporation; (2) a static headspace analysis (SHSA) technique developed and tested by Dr. Ralph Turner of Oak Ridge National Laboratory; (3) the BiMelyze{reg_sign} Mercury Immunoassay (Bio) developed and tested by BioNebraska, Inc.; and (4) a transportable x-ray fluorescence (XRF) instrument/technique developed and tested by Spectrace, Inc.

  12. Application gives the technique the analytic tree in the evaluation the effectiveness programs to radiological protection

    International Nuclear Information System (INIS)

    Perez Gonzalez, F.; Perez Velazquez, R.S.; Fornet Rodriguez, O.; Mustelier Hechevarria, A.; Miller Clemente, A.

    1998-01-01

    In the work we develop the IAEA recommendations in the application the analytic tree as instrument for the evaluation the effectiveness the occupational radiological protection programs. Is reflected like it has been assimilated and converted that technique in daily work istruments in the evaluation process the security conditions in the institutions that apply the nuclear techniques with a view to its autorization on the part of the regulatory organ

  13. Nuclear analytical techniques for on-line elemental analysis in industry

    International Nuclear Information System (INIS)

    1988-06-01

    This report is the result of an advisory group meeting held in Espoo, Finland, 1-5 June, 1987. The purpose of the meeting was to assess the present status and development of nuclear analytical techniques used for industrial process control. The report gives an overview of the different nuclear techniques used for process control and the most important applications. A separate abstract was prepared for each of the 7 papers presented at the meeting. Refs, figs and tabs

  14. Application of nuclear analytical techniques to investigate trace element content in foodstuffs

    International Nuclear Information System (INIS)

    Gharib, A.

    1985-01-01

    The study performed as a joint project with the IAEA includes those foodstuffs which are being used widely in Iran. It was investigated their nutritional requirements, interrelations and the role of their trace elements in metabolism. Various analytical techniques was assessed and compared. The methods involved in the study were ASS, PIXE and NAA (instrumental and radiochemical)

  15. Critical review of analytical techniques for safeguarding the thorium-uranium fuel cycle

    Energy Technology Data Exchange (ETDEWEB)

    Hakkila, E.A.

    1978-10-01

    Conventional analytical methods applicable to the determination of thorium, uranium, and plutonium in feed, product, and waste streams from reprocessing thorium-based nuclear reactor fuels are reviewed. Separations methods of interest for these analyses are discussed. Recommendations concerning the applicability of various techniques to reprocessing samples are included. 15 tables, 218 references.

  16. Critical review of analytical techniques for safeguarding the thorium-uranium fuel cycle

    International Nuclear Information System (INIS)

    Hakkila, E.A.

    1978-10-01

    Conventional analytical methods applicable to the determination of thorium, uranium, and plutonium in feed, product, and waste streams from reprocessing thorium-based nuclear reactor fuels are reviewed. Separations methods of interest for these analyses are discussed. Recommendations concerning the applicability of various techniques to reprocessing samples are included. 15 tables, 218 references

  17. Analytical and numerical techniques for predicting the interfacial stresses of wavy carbon nanotube/polymer composites

    NARCIS (Netherlands)

    Yazdchi, K.; Salehi, M.; Shokrieh, M.M.

    2009-01-01

    By introducing a new simplified 3D representative volume element for wavy carbon nanotubes, an analytical model is developed to study the stress transfer in single-walled carbon nanotube-reinforced polymer composites. Based on the pull-out modeling technique, the effects of waviness, aspect ratio,

  18. Analytic approximate eigenvalues by a new technique. Application to sextic anharmonic potentials

    Science.gov (United States)

    Diaz Almeida, D.; Martin, P.

    2018-03-01

    A new technique to obtain analytic approximant for eigenvalues is presented here by a simultaneous use of power series and asymptotic expansions is presented. The analytic approximation here obtained is like a bridge to both expansions: rational functions, as Padé, are used, combined with elementary functions are used. Improvement to previous methods as multipoint quasirational approximation, MPQA, are also developed. The application of the method is done in detail for the 1-D Schrödinger equation with anharmonic sextic potential of the form V (x) =x2 + λx6 and both ground state and the first excited state of the anharmonic oscillator.

  19. Analytical techniques for the determination of radiochemical purity of radiopharmaceuticals prepared from kits. Pt. III

    International Nuclear Information System (INIS)

    McLean, J.R.; Rockwell, L.J.; Welsh, W.J.

    1982-01-01

    The evaluation of efficacy of commercially available kits used for the preparation of radiopharmaceuticals is one aspect of the Radiation Protection Bureau's radiopharmaceutical quality control program. This report describes some of the analytical methodology employed in the program. The techniques may be of interest to hospital radiopharmacy personnel since many of the tests can be performed rapidly and with a minimum of special equipment, thus enabling the confirmation of radiopharmaceutical purity prior to patient administration. Manufacturers of kits may also be interested in learning of the analytical methods used in the assessment of their products

  20. International conference on isotopic and nuclear analytical techniques for health and environment. Unedited papers

    International Nuclear Information System (INIS)

    2004-01-01

    The IAEA has been supporting nuclear and isotopic analytical techniques as part of its mandate to foster the peaceful uses of nuclear energy for many years. Nuclear analytical laboratories have been installed and upgraded through technical co-operation assistance in many laboratories of Member States. These techniques, including INAA, CRF, PIXE, stable isotopes and radioisotopes, α, β, γ spectrometry, Moessbauer spectrometry, etc., have been applied to a wide range of subjects with varying success. Nuclear analytical techniques, featuring some intrinsic quality control aspects, such as multi-nuclide analysis, frequently serve as 'reference methods' to crosscheck critical results. As nuclear properties of elements are targeted, matrix problems seem to be negligible. In light of its continued commitment and support, the IAEA organized the International Conference on Isotopic and Nuclear Analytical Techniques for Health and Environment. Out of 220 from 61 countries who applied for participation, 155 official participants and five observers from 47 countries were in attendance, with 67 from 32 developing countries and 21 from international organizations, including the World Health Organization. Eleven plenary sessions were held. Also conducted was a panel discussion on Human Capacity Development Needs in the Areas of Analytical Quality Control Services (AQCS), Radiochemistry and Nutrition. The scientific sessions were divided into several topics, which reflect some of the important activities of the IAEA's Department of Nuclear Sciences and Applications (NA): - Isotopic and nuclear techniques (general); - Metrology and quality assurance in nuclear measurements; - Nuclear analytical techniques for environmental monitoring; - Radioecology; - Environmental monitoring; - Radiological safety of food and water; - Methodological aspects of stable isotope techniques in health and environment; - Applications of isotopic techniques in health and environment; - New

  1. Optical and structural characterization of titanium dioxide films growth by the r f-sputtering technique; Caracterizacion optica y estructural de peliculas de dioxido de titanio crecidas por la tecnica de rf-sputtering

    Energy Technology Data Exchange (ETDEWEB)

    Florido C, A.; Calderon, A. [CICATA-IPN, Av. Legaria 694, 11500 Mexico D.F. (Mexico); Mendoza A, J.G.; Becerril, M.; Zelaya A, O. [CINVESTAV, A.P. 14-740, 07000 Mexico D.F. (Mexico)

    2007-07-01

    Full text: The elaboration of a series of grown films of TiO on Corning glaze substrates, as well as silicon, by means of the rf-sputtering technique using one power of 160 watts, with the objective of obtaining the anatase phase which one presents better activity for applications in photo catalysis. In the process of growth it was used a temperature in the range from 300 to 600 C and a separation distance among the target and the substrate of 3.5 cm. The used atmosphere was a mixture of argon and oxygen. It was carried out the characterization of the films obtained by means of UV-vis spectrophotometry, and photoluminescence (FL). The microstructure analysis was carried out by means of X-ray diffraction (XRD), micro-Raman (MR), and atomic force microscopy (AFM). By means of the diffractographs it was determined the grain size. Our results show that in our films they are present the anatase and rutile phases of the titanium dioxide. The analysis of the results of optical spectra shows a forbidden band of the titanium dioxide around 3.2 eV. (Author)

  2. Trace element air pollution monitoring studies in Slovenia using nuclear analytical techniques. Appendix 15

    International Nuclear Information System (INIS)

    Smodis, B.; Jacimovic, R.; Stropnik, B.; Gros, Svetina M.

    1995-01-01

    Up to now, only a few investigations have been performed in Slovenia involving comprehensive studies of trace elements, toxic elements, heavy metals and radionuclides in the atmosphere. The aim of the project is development and application of nuclear and nuclear-related analytical techniques for air pollution studies, leading to formation of a database concerning the trace element air pollution of Slovenia. In this report, the emphasis is on the methodology and analytical development (neutron activation analysis and X-ray spectrometry), and to a lesser extent on the results obtained up to now. Analytical results for several certified reference materials of similar matrix as the real samples investigated are presented and discussed. (author)

  3. A Simplified Analytical Technique for High Frequency Characterization of Resonant Tunneling Diode

    Directory of Open Access Journals (Sweden)

    DESSOUKI, A. A. S.

    2014-11-01

    Full Text Available his paper proposes a simplified analytical technique for high frequency characterization of the resonant tunneling diode (RTD. An equivalent circuit of the RTD that consists of a parallel combination of conductance, G (V, f, and capacitance, C (V, f is formulated. The proposed approach uses the measured DC current versus voltage characteristic of the RTD to extract the equivalent circuit elements parameters in the entire bias range. Using the proposed analytical technique, the frequency response - including the high frequency range - of many characteristic aspects of the RTD is investigated. Also, the maximum oscillation frequency of the RTD is calculated. The results obtained have been compared with those concluded and reported in the literature. The reported results in literature were obtained through simulation of the RTD at high frequency using either a computationally complicated quantum simulator or through difficult RF measurements. A similar pattern of results and highly concordant conclusion are obtained. The proposed analytical technique is simple, correct, and appropriate to investigate the behavior of the RTD at high frequency. In addition, the proposed technique can be easily incorporated into SPICE program to simulate circuits containing RTD.

  4. Experimental evaluation of underride analysis techniques and empirical validation of a new analytical technique.

    Science.gov (United States)

    Boggess, Brian M; Morr, Douglas R; Peterman, Elaine K; Wiechel, John F

    2010-01-01

    Accident reconstructionists are often faced with damage patterns and locations on vehicles that are not well defined by available barrier impact data. One such example is a frontal underride collision. Underride impacts occur when there is a height mismatch between the primary structural components of the impacting vehicles, and the vehicle with the lower height is forced beneath the structure of the other vehicle. The lack of structural engagement typically allows for significantly different damage patterns due to the inherently lower stiffness of the underriding vehicle's contacting surfaces coupled with complex interactions between varying surfaces. In this study, a series of two-vehicle impact tests between a small pickup (bullet vehicle) and a large dump truck (target vehicle) were performed and studied. These tests involved a severe underride configuration in which the dump truck bed's vertical alignment was above the base of the windshield of the pickup. Coupled with these impacting surfaces was a single vertical support, a remnant of a commonly referred to ICC (Interstate Commerce Commission) bumper, which caused a narrow object-type impact, but did not extend down to the pickup's bumper. Multiple prior authors' analytical and empirical relationships to predict impact speed based on crush damage were evaluated using the results of these tests as well as other published underride tests. No single model was sufficient at predicting the mixed mode of impact present in these impact scenarios. However, a system of equations was developed to predict the impact parameters utilizing a combination of previously reported methods and a new empirical relationship presented in this study. This new method shows high correlation and supports the authors' hypothesis that separate crush models can be applied to multiple discrete areas of a vehicle and then combined to form a more complete predictive systematic model.

  5. Assessment of analytical techniques for characterization of crystalline clopidogrel forms in patent applications

    Directory of Open Access Journals (Sweden)

    Luiz Marcelo Lira

    2014-04-01

    Full Text Available The aim of this study was to evaluate two important aspects of patent applications of crystalline forms of drugs: (i the physicochemical characterization of the crystalline forms; and (ii the procedure for preparing crystals of the blockbuster drug clopidogrel. To this end, searches were conducted using online patent databases. The results showed that: (i the majority of patent applications for clopidogrel crystalline forms failed to comply with proposed Brazilian Patent Office guidelines. This was primarily due to insufficient number of analytical techniques evaluating the crystalline phase. In addition, some patent applications lacked assessment of chemical/crystallography purity; (ii use of more than two analytical techniques is important; and (iii the crystallization procedure for clopidogrel bisulfate form II were irreproducible based on the procedure given in the patent application.

  6. IAEA progress report I - Study of archeological objects using PIXE analytical technique

    International Nuclear Information System (INIS)

    Roumie, M.

    2005-01-01

    This is the first IAEA progress report for the period 2005-2006 (CRP number F23023). Since 1999 a particle accelerator, located at the Lebanese Atomic Energy Commission in Beirut, has been devoted to elemental analysis in different domains of application: Archeology, Environment and Material Science. It constitutes the first and unique, till now, ion beam analysis facility in Lebanon. Several nuclear analytical techniques are performed, such as PIXE, RBS, PIGE, ERDA and others. (author)

  7. Quantitative determination of the intensities of known components in spectra obtained from surface analytical techniques

    International Nuclear Information System (INIS)

    Nelson, G.C.

    1984-01-01

    Linear least-squares methods have been used to quantitatively decompose experimental data obtained from surface analytical techniques into its separate components. The mathematical procedure for accomplishing this is described and examples are given of the use of this method with data obtained from Auger electron spectroscopy [both N(E) and derivative], x-ray photoelectron spectroscopy, and low energy ion scattering spectroscopy. The requirements on the quality of the data are discussed

  8. Atmospheric Pollution in the Tula Industrial Corridor studied using a biomonitor and nuclear analytical techniques

    OpenAIRE

    M.A. Martínez-Carrillo

    2011-01-01

    This study deals with the application of nuclear analytical techniques to analyze trace elements in the biological monitor Tillandsia usneoides. Biological monitors provides an alternative advantageous way of particulate matter sampling in air pollution studies, since there is no need of special sampling devices, accumulation time can be as long as desired. T. usneoides, which occurs naturally throughout México, was used to monitor air quality of Tula-Vito-Apasco (TVA) industrial corridor at ...

  9. Systematization on survey and analytical technique of the deep stratum environment

    International Nuclear Information System (INIS)

    Sawaragi, Yoshikazu

    2000-08-01

    This research aimed at investigation on survey and analytical technique to efficiently and rationally grasp the stratum environment from surface to depth of the earth and at extraction of survey and analytical technique necessary when newly evaluating the stratum environment of an area. In this fiscal year, systematization of survey and analytical method to effectively and rationally grasp the stratum environment at objects of the wide to local groundwater flows was investigated on a base of research results and programs on the deep stratum which was already performed or is planned in future by the Japan Nuclear Cycle Development Institute. In this report, it was the first step of the systematization to prepare individual research results accumulated before now. And, the individual R and D result in this fiscal year was laid at main body of this report and was a specimen to promote the research in future. Here were reported on evaluation of water permeability of hard non-continuous rock board in the deep stratum, survey and analysis on three-dimensional property of rock board penetrating flow, R and D on hydrologic testing method and apparatus, survey method and modeling at the deep hydrology, survey on geo-chemical property of groundwater, recovery water phenomena of the groundwater, thin/thick salt boundary, and systematization technique. (G.K.)

  10. A Novel Analytical Technique for Optimal Allocation of Capacitors in Radial Distribution Systems

    Directory of Open Access Journals (Sweden)

    Sarfaraz Nawaz

    2017-07-01

    Full Text Available In this paper, a novel analytical technique is proposed to determine the optimal size and location of shunt capacitor units in radial distribution systems. An objective function is formulated to reduce real power loss, to improve the voltage profile and to increase annual cost savings. A new constant, the Loss Sensitivity Constant (LSC, is proposed here. The value of LSC decides the location and size of candidate buses. The technique is demonstrated on an IEEE-33 bus system at different load levels and the 130-bus distribution system of Jamawa Ramgarh village, Jaipur city. The obtained results are compared with the latest optimization techniques to show the effectiveness and robustness of the proposed technique.

  11. Development of gas-phase sample-introduction techniques for analytical atomic spectrometry.

    Science.gov (United States)

    Nakahara, Taketoshi

    2005-05-01

    For the last 30 years, several types of gas-phase sample-introduction methods in analytical atomic spectrometry, i.e., atomic absorption spectrometry (AAS), atomic emission spectrometry (AES) and atomic fluorescence spectrometry (AFS), have been investigated and developed in the author's laboratory. Their fundamental results are summarized in this review article. The gas-phase sample-introduction techniques developed in the author's laboratory can be roughly divided into four groups: i) hydride generation, ii) cold-vapor generation of mercury, iii) analyte volatilization reactions and iv) miscellaneous. The analytical figures of merit of the gas-phase sample-introduction methods have been described in detail. Hydride generation has been coupled with the AAS of As, Bi, Ge, Pb, Sb, Se, Sn and Te, with the inductively coupled plasma (ICP) AES of As, Bi, Sn, Se and Sb, with the high-power nitrogen microwave-induced plasma (N2-MIP) AES of As, Bi, Pb, Sb, Se, Sn and Te by their single- and multi-element determinations, with the AFS of As, Bi, Pb, Sb, Se, Sn and Te, and with the ICP mass spectrometry (MS) of As and Se. The cold-vapor generation method for Hg has been combined with atmospheric-pressure helium microwave-induced plasma (He- or Ar-MIP)-AES and AFS. Furthermore, analyte volatilization reactions have been employed in the ICP-AES of iodine, in the He-MIP-AES of iodine bromine, chlorine, sulfur and carbon, and in the ICP-MS of sulfur. As a result, when compared with conventional solution nebulization, a great improvement in the sensitivity has been attained in each instance. In addition, the developed techniques coupled with analytical atomic spectrometry have been successfully applied to the determination of trace elements in a variety of practical samples.

  12. Synchrotron X-ray Analytical Techniques for Studying Materials Electrochemistry in Rechargeable Batteries.

    Science.gov (United States)

    Lin, Feng; Liu, Yijin; Yu, Xiqian; Cheng, Lei; Singer, Andrej; Shpyrko, Oleg G; Xin, Huolin L; Tamura, Nobumichi; Tian, Chixia; Weng, Tsu-Chien; Yang, Xiao-Qing; Meng, Ying Shirley; Nordlund, Dennis; Yang, Wanli; Doeff, Marca M

    2017-11-08

    Rechargeable battery technologies have ignited major breakthroughs in contemporary society, including but not limited to revolutions in transportation, electronics, and grid energy storage. The remarkable development of rechargeable batteries is largely attributed to in-depth efforts to improve battery electrode and electrolyte materials. There are, however, still intimidating challenges of lower cost, longer cycle and calendar life, higher energy density, and better safety for large scale energy storage and vehicular applications. Further progress with rechargeable batteries may require new chemistries (lithium ion batteries and beyond) and better understanding of materials electrochemistry in the various battery technologies. In the past decade, advancement of battery materials has been complemented by new analytical techniques that are capable of probing battery chemistries at various length and time scales. Synchrotron X-ray techniques stand out as one of the most effective methods that allow for nearly nondestructive probing of materials characteristics such as electronic and geometric structures with various depth sensitivities through spectroscopy, scattering, and imaging capabilities. This article begins with the discussion of various rechargeable batteries and associated important scientific questions in the field, followed by a review of synchrotron X-ray based analytical tools (scattering, spectroscopy, and imaging) and their successful applications (ex situ, in situ, and in operando) in gaining fundamental insights into these scientific questions. Furthermore, electron microscopy and spectroscopy complement the detection length scales of synchrotron X-ray tools and are also discussed toward the end. We highlight the importance of studying battery materials by combining analytical techniques with complementary length sensitivities, such as the combination of X-ray absorption spectroscopy and electron spectroscopy with spatial resolution, because a sole

  13. Process Analytical Techniques Based on In-Line Vibrational Spectroscopy and their Industrial Applications

    Directory of Open Access Journals (Sweden)

    Jednačak, T.

    2013-03-01

    Full Text Available Process analytical techniques (PAT involve the monitoring and control of physical and chemical processes as well as the identification of important process parameters in order to obtain the products with desired properties. PAT have been applied in various industrial process phases to ensure better process understanding, quality by optimal design and determination of process disturbances in time. In-line vibrational spectroscopic techniques are one of the major process analytical techniques used today. The most frequently used in-line vibrational spectroscopic techniques are near infrared spectroscopy (NIR, attenuated total reflectance middle infrared spectroscopy (ATR-MIR and Raman spectroscopy (Table 1, Figs. 1 and 2. They provide in situ real-time monitoring of the production processes by using different types of in-line probes (Figs. 3–5 which reduce exposure to hazardous materials and contamination, sample degradation or equilibrium perturbations in the reaction system. Due to the aforementioned advantages, in-line vibrational spectroscopic techniques have been successfully applied for different industrial pur- poses. The analysis of characteristic vibrational bands in in-line infrared and Raman spectra enable the monitoring of different processes such as crystallization, dissolution, polimorphic transitions and chemical reactions (Scheme 1, Figs. 6 and 7. The obtained data are, due to their complexity, very often further processed by multivariate data analysis methods (Fig. 9, such as principal components analysis (PCA and partial least squares (PLS. The basic principles of PCA and PLS are shown in Fig. 8. A number of different in-line vibrational spectroscopic techniques as well as multivariate data analysis methods have been developed recently, but in this article only the most important and most frequently used techniques are described.   KUI – 7/2013 Received April 10, 2012 Accepted July 18, 2012

  14. A novel analytical approximation technique for highly nonlinear oscillators based on the energy balance method

    Directory of Open Access Journals (Sweden)

    Md. Alal Hosen

    2016-01-01

    Full Text Available In the present paper, a novel analytical approximation technique has been proposed based on the energy balance method (EBM to obtain approximate periodic solutions for the focus generalized highly nonlinear oscillators. The expressions of the natural frequency-amplitude relationship are obtained using a novel analytical way. The accuracy of the proposed method is investigated on three benchmark oscillatory problems, namely, the simple relativistic oscillator, the stretched elastic wire oscillator (with a mass attached to its midpoint and the Duffing-relativistic oscillator. For an initial oscillation amplitude A0 = 100, the maximal relative errors of natural frequency found in three oscillators are 2.1637%, 0.0001% and 1.201%, respectively, which are much lower than the errors found using the existing methods. It is highly remarkable that an excellent accuracy of the approximate natural frequency has been found which is valid for the whole range of large values of oscillation amplitude as compared with the exact ones. Very simple solution procedure and high accuracy that is found in three benchmark problems reveal the novelty, reliability and wider applicability of the proposed analytical approximation technique.

  15. Recent Development in Sample Preparation and Analytical Techniques for Determination of Quinolone Residues in Food Products.

    Science.gov (United States)

    Zhang, Zhichao; Cheng, Hefa

    2017-05-04

    Used heavily in food animal production, quinolones occur widely in food products of animal origin. Development of highly sensitive and selective analytical techniques for the detection of quinolone residues, often at trace levels, in food samples is necessary to ensure food safety and understand their public health risk. With complex matrices, food samples typically require a series of pre-treatment steps, such as powdering, homogenization, deproteinization, and filtration. This review summarizes the recent advances in extraction, concentration, and detection techniques for quinolones in food product samples, and briefly compares the advantages and limitations of major techniques. Recent development of quick, easy, cheap, effective, rugged, and safe (QuEChERS) extraction method and immunoassay- and biosensor-based detection methods for the determination of quinolones residues in food products is discussed in details. A perspective on the trends and needs of future research is also presented.

  16. An alternative technique for the implementation of an analytical approximation for transients with temperature feedback

    Energy Technology Data Exchange (ETDEWEB)

    Palma, Daniel A.P. [Instituto Federal do Rio de Janeiro, Nilopolis, RJ (Brazil)], e-mail: dpalmaster@gmail.com; Silva, Adilson C. da; Goncalves, Alessandro C.; Martinez, Aquilino S. [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Nuclear], e-mail: asilva@con.ufrj.br, e-mail: agoncalves@con.ufrj.br, e-mail: aquilino@lmp.ufrj.br

    2009-07-01

    The analytical solution of point kinetics equations with a group of delayed neutrons is useful in predicting neutron density variation during the operation of a nuclear reactor. Although different approximate solutions for the system of point kinetics equations with temperature feedback may be found in literature, some of them do not present an explicit dependence in time, which makes the computing implementation difficult and, as a result, its applicability in practical cases. The present paper uses the polynomial adjustment technique to overcome this problem in the analytical approximation as proposed by Nahla. In a systematic comparison with other existing approximations it is concluded that the method is adequate, presenting small deviations in relation to the reference values obtained from the reference numerical method. (author)

  17. An alternative technique for the implementation of an analytical approximation for transients with temperature feedback

    International Nuclear Information System (INIS)

    Palma, Daniel A.P.; Silva, Adilson C. da; Goncalves, Alessandro C.; Martinez, Aquilino S.

    2009-01-01

    The analytical solution of point kinetics equations with a group of delayed neutrons is useful in predicting neutron density variation during the operation of a nuclear reactor. Although different approximate solutions for the system of point kinetics equations with temperature feedback may be found in literature, some of them do not present an explicit dependence in time, which makes the computing implementation difficult and, as a result, its applicability in practical cases. The present paper uses the polynomial adjustment technique to overcome this problem in the analytical approximation as proposed by Nahla. In a systematic comparison with other existing approximations it is concluded that the method is adequate, presenting small deviations in relation to the reference values obtained from the reference numerical method. (author)

  18. Technique and Understanding: Paul Ricoeur on Freud and the Analytic Experience

    Directory of Open Access Journals (Sweden)

    Eoin Carney

    2016-08-01

    Full Text Available For Ricœur any study of Freud, or of psychoanalysis more generally, needs to take into account the crucial dimension of the analytic experience itself. Psychoanalysis, as a “mixed discourse,” aims to anticipate questions of meaning and explication alongside technical questions of energies, repression, displacement, and so on. The analytic experience is one which is practical and intersubjective, but which is also guided by various techniques or methods. These techniques, I will argue, should be understood as a type of techne, one which is less concerned with hermeneutic questions of meaning than with quasi-scientific questions of force, feedback, struggle, and process. The practice of psychoanalysis, on the other hand, deals with the ways in which these forces or drives become meaningful for a particular subject, and within a singular context or history. This article will aim to draw out both the interrelationship between techniques and practical understanding, and also the productive incommensurability between the two.

  19. An Accurate Approximate-Analytical Technique for Solving Time-Fractional Partial Differential Equations

    Directory of Open Access Journals (Sweden)

    M. Bishehniasar

    2017-01-01

    Full Text Available The demand of many scientific areas for the usage of fractional partial differential equations (FPDEs to explain their real-world systems has been broadly identified. The solutions may portray dynamical behaviors of various particles such as chemicals and cells. The desire of obtaining approximate solutions to treat these equations aims to overcome the mathematical complexity of modeling the relevant phenomena in nature. This research proposes a promising approximate-analytical scheme that is an accurate technique for solving a variety of noninteger partial differential equations (PDEs. The proposed strategy is based on approximating the derivative of fractional-order and reducing the problem to the corresponding partial differential equation (PDE. Afterwards, the approximating PDE is solved by using a separation-variables technique. The method can be simply applied to nonhomogeneous problems and is proficient to diminish the span of computational cost as well as achieving an approximate-analytical solution that is in excellent concurrence with the exact solution of the original problem. In addition and to demonstrate the efficiency of the method, it compares with two finite difference methods including a nonstandard finite difference (NSFD method and standard finite difference (SFD technique, which are popular in the literature for solving engineering problems.

  20. Applied research on air pollution using nuclear-related analytical techniques

    International Nuclear Information System (INIS)

    1994-01-01

    A co-ordinated research programme (CRP) on applied research on air pollution using nuclear-related techniques is a global CRP which will run from 1992-1996, and will build upon the experience gained by the Agency from the laboratory support that it has been providing for several years to BAPMoN - the Background Air Pollution Monitoring Network programme organized under the auspices of the World Meterological Organization. The purpose of this CRP is to promote the use of nuclear analytical techniques in air pollution studies, e.g. NAA, XFR, and PIXE for the analysis of toxic and other trace elements in suspended particulate matter (including air filter samples), rainwater and fog-water samples, and in biological indicators of air pollution (e.g. lichens and mosses). The main purposes of the core programme are i) to support the use of nuclear and nuclear-related analytical techniques for practically-oriented research and monitoring studies on air pollution ii) to identify major sources of air pollution affecting each of the participating countries with particular reference to toxic heavy metals, and iii) to obtain comparative data on pollution levels in areas of high pollution (e.g. a city centre or a populated area downwind of a large pollution source) and low pollution (e.g. rural areas). This document reports the discussions held during the first Research Co-ordination Meeting (RCM) for the CRP which took place at the IAEA Headquarters in Vienna. Refs, figs and tabs

  1. Technical meeting on commercial applications of nuclear analytical techniques. Meeting report

    International Nuclear Information System (INIS)

    2004-01-01

    This report summarizes the findings of the Technical Meeting on the Commercial Applications of Nuclear Analytical Techniques held in Vienna on 23-26 November 2004, where an assessment was initiated of the world capacity and market potentials for neutron activation analysis and nuclear spectroscopy, including an estimation of economic revenues. Industry and governmental agencies were identified as stakeholders for these laboratories. Examples are given of potential benefits of these techniques to the stakeholders. The potentials for commercial applications of neutron activation analysis and nuclear spectroscopy (measurement of alpha, beta and gamma ray emitting radionuclides) are addressed. First estimates are given of the worldwide capacity of these laboratories, suggestions and examples are given for potential markets and the typical organizational and technical constraints are discussed. Two case studies of commercial neutron activation analysis laboratories at a small and a medium-size reactor are given in the 'individual contributions' section of this document. An assessment of other nuclear analytical techniques such as X ray Fluorescence Spectrometry, Particle Induced X ray Emission Spectrometry or Ion Beam Analysis Spectrometry has been completed after a comprehensive collection of background information

  2. Recent Trends in Microextraction Techniques Employed in Analytical and Bioanalytical Sample Preparation

    Directory of Open Access Journals (Sweden)

    Abuzar Kabir

    2017-12-01

    Full Text Available Sample preparation has been recognized as a major step in the chemical analysis workflow. As such, substantial efforts have been made in recent years to simplify the overall sample preparation process. Major focusses of these efforts have included miniaturization of the extraction device; minimizing/eliminating toxic and hazardous organic solvent consumption; eliminating sample pre-treatment and post-treatment steps; reducing the sample volume requirement; reducing extraction equilibrium time, maximizing extraction efficiency etc. All these improved attributes are congruent with the Green Analytical Chemistry (GAC principles. Classical sample preparation techniques such as solid phase extraction (SPE and liquid-liquid extraction (LLE are being rapidly replaced with emerging miniaturized and environmentally friendly techniques such as Solid Phase Micro Extraction (SPME, Stir bar Sorptive Extraction (SBSE, Micro Extraction by Packed Sorbent (MEPS, Fabric Phase Sorptive Extraction (FPSE, and Dispersive Liquid-Liquid Micro Extraction (DLLME. In addition to the development of many new generic extraction sorbents in recent years, a large number of molecularly imprinted polymers (MIPs created using different template molecules have also enriched the large cache of microextraction sorbents. Application of nanoparticles as high-performance extraction sorbents has undoubtedly elevated the extraction efficiency and method sensitivity of modern chromatographic analyses to a new level. Combining magnetic nanoparticles with many microextraction sorbents has opened up new possibilities to extract target analytes from sample matrices containing high volumes of matrix interferents. The aim of the current review is to critically audit the progress of microextraction techniques in recent years, which has indisputably transformed the analytical chemistry practices, from biological and therapeutic drug monitoring to the environmental field; from foods to phyto

  3. Commissioning of the laboratory of Atucha II NPP. Implementation and optimization of analytical techniques, quality aspects

    International Nuclear Information System (INIS)

    Schoenbrod, Betina; Quispe, Benjamin; Cattaneo, Alberto; Rodriguez, Ivanna; Chocron, Mauricio; Farias, Silvia

    2012-09-01

    Atucha II NPP is a Pressurized Vessel Heavy Water Reactor (PVHWR) of 740 MWe designed by SIEMENSKWU. After some years of delay, this NPP is in advanced construction state, being the beginning of commercial operation expected for 2013. Nucleoelectrica Argentina (N.A.S.A.) is the company in charge of the finalization of this project and the future operation of the plant. The Comision Nacional de Energia Atomica (C.N.E.A.) is the R and D nuclear institution in the country that, among many other topics, provides technical support to the stations. The Commissioning Chemistry Division of CNAII is in charge of the commissioning of the demineralization water plant and the organization of the chemical laboratory. The water plant started operating successfully in July 2010 and is providing the plant with nuclear grade purity water. Currently, in the conventional ('cold') laboratory several activities are taking place. On one hand, analytical techniques for the future operation of the plant are being tested and optimized. On the other hand, the laboratory is participating in the cleaning and conservation of the different components of the plant, providing technical support and the necessary analysis. To define the analytical techniques for the normal operation of the plant, the parameters to be measured and their range were established in the Chemistry Manual. The necessary equipment and reagents were bought. In this work, a summary of the analytical techniques that are being implemented and optimized is presented. Common anions (chloride, sulfate, fluoride, bromide and nitrate) are analyzed by ion chromatography. Cations, mainly sodium, are determined by absorption spectrometry. A UV-Vis spectrometer is used to determine silicates, iron, ammonia, DQO, total solids, true color and turbidity. TOC measurements are performed with a TOC analyzer. To optimize the methods, several parameters are evaluated: linearity, detection and quantification limits, precision and

  4. Wireless network development for the automatic registration of parameters in laboratories of nuclear analytical techniques

    International Nuclear Information System (INIS)

    Tincopa, Jean Pierre; Baltuano, Oscar; Bedregal, Patricia

    2015-01-01

    This paper presents in detail the development of a low-cost wireless network for automatic recording of temperature and relative humidity parameters in the laboratory of nuclear analytical techniques. This prototype has a DHT22 sensor which gives us both parameters with high precision and are automatically read and displayed by a ATmega328P microcontroller. This data is then transmitted through transceivers Xbee Pro S2B forming a mesh network for real time storage using an RTC (Real Time Clock). We present the experimental results obtained in its implementation. (author)

  5. Teaching Writing Analytical Exposition Text by Using Team Word-webbing Technique

    OpenAIRE

    Yudianto, Fajar

    2017-01-01

    The purpose of this research was to investigate whether or not the use of “Team Word-Webbing Technique” effective in teaching writing analytical exposition text at the eleventh grade students of SMAN 1 Sungai Ambawang in academic year 2016/2017. This research applied a quasi-experimental design. The population of this research was XI IPA 2 as the experimental group and XI IPA 1 as the control group. The data was collected by using measurement technique with written test as the tool of collect...

  6. Analytical thermal study on nonlinear fundamental heat transfer cases using a novel computational technique

    International Nuclear Information System (INIS)

    Ghasemi, Seiyed E.; Zolfagharian, Ali; Hatami, M.; Ganji, D.D.

    2016-01-01

    Highlights: • Fin temperature distribution with a temperature-dependent thermal conductivity is investigated. • Cooling of the lumped system with a variable specific heat is studied analytically. • Temperature distribution of a convective–radiative fin with a constant thermal conductivity is analyzed. - Abstract: In this paper a novel computational technique called Parameterized Perturbation Method (PPM) is used to obtain the solutions of nonlinear fundamental heat conduction equations. Three well known problems in the area of heat transfer are addressed to be solved. An analytical investigation is carried out for: (a) the temperature distribution in a fin with a temperature-dependent thermal conductivity, (b) the cooling of the lumped system with variable specific heat, and (c) the temperature distribution of a convective–radiative fin. The validity of the results of PPM solution was verified via comparison with numerical results obtained using a fourth order Runge–Kutta method. These comparisons revealed that PPM is a powerful approach for solving these problems. Also, the results showed that the main attributions of this method are very straightforward calculations and low computational burden compared to previous analytical and numerical approaches.

  7. Determination of Rare Earth Elements in Thai Monazite by Inductively Coupled Plasma and Nuclear Analytical techniques

    International Nuclear Information System (INIS)

    Busamongkol, Arporn; Ratanapra, Dusadee; Sukharn, Sumalee; Laoharojanaphand, Sirinart

    2003-10-01

    The inductively coupled plasma atomic emission spectroscopy (ICP-AES) for the determination of individual rare-earth elements (REE) was evaluated by comparison with instrumental neutron activation analysis (INAA) and x-ray fluorescence spectrometry (XRF). The accuracy and precision of INAA and ICP-AES were evaluated by using standard reference material IGS-36, a monazite concentrate. For INAA, the results were close to the certified value while ICP-AES were in good agreement except for some low concentration rare earth. The techniques were applied for the analysis of some rare earth elements in two Thai monazite samples preparing as the in-house reference material for the Rare Earth Research and Development Center, Chemistry Division, Office of Atoms for Peace. The analytical results obtained by these techniques were in good agreement with each other

  8. Intracavity optogalvanic spectroscopy. An analytical technique for 14C analysis with subattomole sensitivity.

    Science.gov (United States)

    Murnick, Daniel E; Dogru, Ozgur; Ilkmen, Erhan

    2008-07-01

    We show a new ultrasensitive laser-based analytical technique, intracavity optogalvanic spectroscopy, allowing extremely high sensitivity for detection of (14)C-labeled carbon dioxide. Capable of replacing large accelerator mass spectrometers, the technique quantifies attomoles of (14)C in submicrogram samples. Based on the specificity of narrow laser resonances coupled with the sensitivity provided by standing waves in an optical cavity and detection via impedance variations, limits of detection near 10(-15) (14)C/(12)C ratios are obtained. Using a 15-W (14)CO2 laser, a linear calibration with samples from 10(-15) to >1.5 x 10(-12) in (14)C/(12)C ratios, as determined by accelerator mass spectrometry, is demonstrated. Possible applications include microdosing studies in drug development, individualized subtherapeutic tests of drug metabolism, carbon dating and real time monitoring of atmospheric radiocarbon. The method can also be applied to detection of other trace entities.

  9. Does leaf chemistry differentially affect breakdown in tropical vs temperate streams? Importance of standardized analytical techniques to measure leaf chemistry

    Science.gov (United States)

    Marcelo Ard& #243; n; Catherine M. Pringle; Susan L. Eggert

    2009-01-01

    Comparisons of the effects of leaf litter chemistry on leaf breakdown rates in tropical vs temperate streams are hindered by incompatibility among studies and across sites of analytical methods used to measure leaf chemistry. We used standardized analytical techniques to measure chemistry and breakdown rate of leaves from common riparian tree species at 2 sites, 1...

  10. In Situ Analytical Characterization of Contaminated Sites Using Nuclear Spectrometry Techniques. Review of Methodologies and Measurements

    International Nuclear Information System (INIS)

    2017-01-01

    Past and current human activities can result in the contamination of sites by radionuclides and heavy metals. The sources of contamination are various. The most important sources for radionuclide release include global fallout from nuclear testing, nuclear and radiological accidents, waste production from nuclear facilities, and activities involving naturally occurring radioactive material (NORM). Contamination of the environment by heavy metals mainly originates from industrial applications and mineralogical background concentration. Contamination of sites by radionuclides and heavy metals can present a risk to people and the environment. Therefore, the estimation of the contamination level and the identification of the source constitute important information for the national authorities with the responsibility to protect people and the environment from adverse health effects. In situ analytical techniques based on nuclear spectrometry are important tools for the characterization of contaminated sites. Much progress has been made in the design and implementation of portable systems for efficient and effective monitoring of radioactivity and heavy metals in the environment directly on-site. Accordingly, the IAEA organized a Technical Meeting to review the current status and trends of various applications of in situ nuclear spectrometry techniques for analytical characterization of contaminated sites and to support Member States in their national environmental monitoring programmes applying portable instrumentation. This publication represents a comprehensive review of the in situ gamma ray spectrometry and field portable X ray fluorescence analysis techniques for the characterization of contaminated sites. It includes papers on the use of these techniques, which provide useful background information for conducting similar studies, in the following Member States: Argentina, Australia, Brazil, Czech Republic, Egypt, France, Greece, Hungary, Italy, Lithuania

  11. Analytical model for Transient Current Technique (TCT) signal prediction and analysis for thin interface characterization

    Science.gov (United States)

    Bronuzzi, J.; Mapelli, A.; Sallese, J. M.

    2016-12-01

    A silicon wafer bonding technique has been recently proposed for the fabrication of monolithic silicon radiation detectors. This new process would enable direct bonding of a read-out electronic chip wafer on a highly resistive silicon substrate wafer. Therefore, monolithic silicon detectors could be fabricated in this way which would allow the free choice of electronic chips and high resistive silicon bulk, even from different providers. Moreover, a monolithic detector with a high resistive bulk would also be available. Electrical properties of the bonded interface are then critical for this application. Indeed, mobile charges generated by radiation inside the bonded bulk are expected to transit through the interface to be collected by the read-out electronics. In order to characterize this interface, the concept of Transient Current Technique (TCT) has been explored by means of numerical simulations combined with a physics based analytical model. In this work, the analytical model giving insight into the physics behind the TCT dependence upon interface traps is validated using both TCAD simulations and experimental measurements.

  12. Impact of accelerator-based analytical techniques on the knowledge and conservation of cultural heritage

    International Nuclear Information System (INIS)

    Dran, Jean Claude

    2001-01-01

    A large set of modern analytical techniques is currently applied to get a better insight on art and archaeological objects as well as to contribute to their conservation and restoration. Because of the precious and sometimes unique character of the works, non-destructive techniques and even those requiring no (or only minute) sampling, are preferred. From this standpoint, ion beam analysis (IBA) constitutes one of the best choices, since it combines quite good analytical performance and non-destructiveness. For over 10 years, an IBA facility has been installed in the Research Laboratory of the Museums of France. Until now it is the only facility of this kind entirely devoted to the study of cultural heritage. A special set-up, namely an external beam line, has been developed which permits the in-air analysis of large or fragile works of art without sampling. This facility is used for both short investigations at the request of museum curators and extensive research works in art history and archaeology. Numerous examples will be given to highlight the impact of this tool on cultural heritage. (author)

  13. Contribution of analytical techniques coupled to the knowledge of the uranium speciation in natural conditions

    International Nuclear Information System (INIS)

    Petit, J.

    2009-06-01

    To understand the transport mechanisms and the radionuclides behaviour in the bio-geosphere is necessary to evaluate healthy and environmental risks of nuclear industry. These mechanisms are monitored by radioelements speciation, namely the distribution between their different physico-chemical forms in the environment. From this perspective, this PhD thesis deals with uranium speciation in a natural background. A detailed summary of uranium biogeochemistry has been written, which enables to restrict the PhD issue to uranium complexation with oxalic acid, a hydrophilic organic acid with good binding properties, ubiquitous in soil waters. Analytical conditions have been established by means of speciation diagrams. The speciation diagrams building by means of literature stability constants has allowed to define the analytical conditions of complex formation. The chosen analytical technique is the hyphenation of a separative technique (liquid chromatography LC or capillary electrophoresis CE) with mass spectrometry (ICPMS). The studied complexes presence in the synthetic samples has been confirmed with UV/visible spectrophotometry. LC-ICPMS analyses have proved the lability of the uranyl-organic acid complexes, namely their tendency to dissociate during analysis, which prevents from studying uranium speciation. CE-ICPMS study of labile complexes from a metal-ligand system has been made possible by employing affinity capillary electrophoresis, which enables to determine stability constants and electrophoretic mobilities. This PhD thesis has allowed to compare the different mathematical treatments of binding isotherm and to take into account ionic strength and real ligand concentration. Affinity CE has been applied successfully to lanthanum-oxalate (model system) and uranium-oxalate systems. The obtained results have been applied to a real system (situated in Le Bouchet). This shows the contribution of the developed method to the modelling of uranium speciation. (author)

  14. Uncovering category specificity of genital sexual arousal in women: The critical role of analytic technique.

    Science.gov (United States)

    Pulverman, Carey S; Hixon, J Gregory; Meston, Cindy M

    2015-10-01

    Based on analytic techniques that collapse data into a single average value, it has been reported that women lack category specificity and show genital sexual arousal to a large range of sexual stimuli including those that both match and do not match their self-reported sexual interests. These findings may be a methodological artifact of the way in which data are analyzed. This study examined whether using an analytic technique that models data over time would yield different results. Across two studies, heterosexual (N = 19) and lesbian (N = 14) women viewed erotic films featuring heterosexual, lesbian, and gay male couples, respectively, as their physiological sexual arousal was assessed with vaginal photoplethysmography. Data analysis with traditional methods comparing average genital arousal between films failed to detect specificity of genital arousal for either group. When data were analyzed with smoothing regression splines and a within-subjects approach, both heterosexual and lesbian women demonstrated different patterns of genital sexual arousal to the different types of erotic films, suggesting that sophisticated statistical techniques may be necessary to more fully understand women's genital sexual arousal response. Heterosexual women showed category-specific genital sexual arousal. Lesbian women showed higher arousal to the heterosexual film than the other films. However, within subjects, lesbian women showed significantly different arousal responses suggesting that lesbian women's genital arousal discriminates between different categories of stimuli at the individual level. Implications for the future use of vaginal photoplethysmography as a diagnostic tool of sexual preferences in clinical and forensic settings are discussed. © 2015 Society for Psychophysiological Research.

  15. Simple analytical technique for liquid scintillation counting of environmental carbon-14 using gel suspension method

    International Nuclear Information System (INIS)

    Okai, Tomio; Wakabayashi, Genichiro; Nagao, Kenjiro; Matoba, Masaru; Ohura, Hirotaka; Momoshima, Noriyuki; Kawamura, Hidehisa

    2000-01-01

    A simple analytical technique for liquid scintillation counting of environmental 14 C was developed. Commercially available gelling agent, N-lauroyl-L -glutamic -α,γ-dibutylamide, was used for the gel-formation of the samples (gel suspension method) and for the subsequent liquid scintillation counting of 14 C in the form of CaCO 3 . Our procedure for sample preparation is much simpler than that of the conventional methods and requires no special equipment. Self absorption, stability and reproducibility of gel suspension samples were investigated in order to evaluate the characteristics of the gel suspension method for 14 C activity measurement. The self absorption factor is about 70% and slightly decrease as CaCO 3 weight increase. This is considered to be mainly due to the absorption of β-rays and scintillation light by the CaCO 3 sample itself. No change of the counting rate for the gel suspension sample was observed for more than 2 years after the sample preparation. Four samples were used for checking the reproducibility of the sample preparation method. The same values were obtained for the counting rate of 24 C activity within the counting error. No change of the counting rate was observed for the 're-gelated' sample. These results show that the gel suspension method is appropriate for the 14 C activity measurement by the liquid scintillation counting method and useful for a long-term preservation of the sample for repeated measurement. The above analytical technique was applied to actual environmental samples in Fukuoka prefecture, Japan. Results obtained were comparable with those by other researchers and appear to be reasonable. Therefore, the newly developed technique is useful for the routine monitoring of environmental 14 C. (author)

  16. Beta Autoradiography. An analytical technique to investigate radionuclides contamination on surface

    International Nuclear Information System (INIS)

    Ficher, P.; Goutelard, F.; Siitari-Kauppi, M.

    2012-01-01

    In decommissioning of old buildings and after disposal of nuclear facilities (materials, glove boxes,...), the inventory of the radioactive contamination of various building materials needs to be obtained in order to fix the working condition for dismantling. The challenge of this study was to classify different building materials of a whole research laboratory that was dedicated to research on organic molecules labeled with H-3 and C-14. The problem of waste classification is essential for safety treatment of waste and also for its cost. The analytical technique of beta autoradiography particularly well known for biological researches has been tested to investigate radionuclides contamination on surface. This technique is mainly interesting for beta and alpha emitters but also sensitive to gamma radiation. The first step of this technique is the deposit of a film on the surface of material to be analyzed. Films can be deposited on the ground or also fixed on the walls or even on the ceiling. The film is a plastic sheet covered with an emulsion containing photostimulable crystals and Eu that is activated when the film is exposed on radioactive source. The exposed films are then scanned with the Cyclone Plus equipment to get a digitized image. This image represents the radioactivity of the surface studied. The possibility to re-use the films is very important to investigate a large area. This autoradiography technique has retained our attention for its sensitivity and moreover the possibility of 2-dimensional investigation has been found as a real advantage. However it remains now as a qualitative technique and new studies must be launched to prove its quantitative potentialities. The high spatial resolution was not as important as in biological observation, and the mm resolution is totally sufficient

  17. Review of the various analytical techniques and algorithms for detection and quantification of TATP

    Science.gov (United States)

    Pacheco-Londono, Leonardo; Primera, Oliva M.; Ramirez, Michael; Ruiz, Orlando; Hernandez-Rivera, Samuel

    2005-05-01

    The objective of this research is to design and develop a multi-sensor capable of fast detection and of recognition optimization of the techniques for used for quantification of TATP by Pattern Recognition. In particular, the long range goal of the research is to use sensor fusion and sensor "talking" modalities to couple Stand Off detectors with Chemical Point detectors for detection of airborne chemical agents and detection of Improvised Explosive Devices (IEDs). Vibrational spectroscopy techniques are very fast and can be used for real time detection. Good results have been obtained with various target molecular (chemical) systems such as TATP, TNT and DNT. Samples of TATP were detected and quantified in air, in solution and in solid phase on surfaces by different techniques. FTIR Spectroscopy and GS-MS were used to generate new analytical procedures for detection and analysis of the organic peroxide. These procedures were compared and taken to their limits by optimization with Chemometrics, Partial Least Squares (PLS), and Discriminant Analysis (DA).

  18. Facility and application of nuclear and supplementary analytical techniques at Dalat Nuclear Research Institute

    International Nuclear Information System (INIS)

    Nguyen Mong Sinh; Ho Manh Dung; Nguyen Thanh Binh

    2006-01-01

    The main applications of the nuclear and supplementary analytical techniques (N and SATs) in the Dalat Nuclear Research Institute (DNRI) and the facilities for the techniques are presented. The NATs in DNRI include the neutron activation analysis (NAA) with instrumental, radiochemical and prompt gamma methods (INAA, RNAA, PGNAA), the X-ray fluorescence analysis (XRFA) and the low-level counting and spectrometry. The sample irradiation sites for NAA, the automatic and manual pneumatic transfer systems, were installed at channels 7-1 and 13-2 and rotary rack on the Dalat research reactor. An ORTEC automatic sample changer (model ASC2) for γ-ray counting was equipped. A computer software for NAA based on the k 0 -standardization method for calculation of elemental concentration was developed. The low-level counting and spectrometry techniques have been setup. The devices required for sampling, sample preparation and data processing have also been equipped. The applications of N and SATs for determination of elemental composition, particularly important in providing data so-called trace elements, radionuclides and multi-element have been enlarged for objects of geology, archaeology, bio-agriculture, health-nutrition and environment. The implementation a quality system for N and SATs has been planned and initiated. (author)

  19. Capillary electromigration techniques for studying interactions between analytes and lipid dispersions.

    Science.gov (United States)

    Wiedmer, Susanne K; Lokajová, Jana

    2013-01-01

    CE has matured into a well-known and much used separation technique, with applications covering more or less all types of samples. EKC, which originally was developed for the separation of uncharged compounds, is still today under much development, with main focus on finding the perfect or ideal carriers (pseudo-stationary phase) for a broad range of analytes. In this review, the use of lipid dispersions as pseudostationary phases in EKC performed in capillaries and microchips, in addition to CE frontal analysis and partial filling EKC using lipid dispersions is discussed. Various types of lipid dispersions including liposomes, PEG-stabilized aggregates, proteoliposomes, lipid-based nanoparticles, and commercial lipid emulsions are described. The purpose of the review is to give the reader an overview of how EKC, CE frontal analysis, and partial filling EKC, have been applied to the study of interactions between analytes and lipid membranes. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  20. Study of the analytic quality in the determinations of Cr, Fe, Mn, Cu, Zn, Pb and Hg through conventional and nuclear analytical techniques in mosses of the MATV

    International Nuclear Information System (INIS)

    Caballero S, B.

    2013-01-01

    To evaluate the environmental risks of air pollution and to facilitate the decision-making for control, is necessary to have the capacity to generate data with analytical quality. A comparison between nuclear (Neutron activation analysis and total reflection X-ray fluorescence spectrometry) and no nuclear analytical techniques (atomic absorption spectrometry and inductively coupled plasma optical emission spectrometry) for simultaneous determination of metal content (Cr, Cu, Fe, Hg, Mn, Pb and Zn) in mosses from Metropolitan Area of the Toluca Valley (MATV) was performed. Epiphytic mosses (Fabriona ciliaris and Leskea angustata) were sampled in two campaigns, 16 sites (urban, transition and natural) and were prepared for each technique. The biological certified reference materials were used for the quality control and to evaluate accuracy, precision, linearity, detection and quantification limits. Results show that nuclear analytical techniques and no nuclear applied in chemical analysis of Cr, Cu, Fe, Hg, Mn, Pb and Zn in moss from MATV are comparable and therefore all of these can potentially be used for this purpose. However, if its considered both, the performance parameters and economic/operational characteristics is widely recommended inductively coupled plasma optical emission spectrometry, conventional analytical technique, which showed the highest analytical grade quality. Also were observed spatial and temporal variations in the concentrations of Cr, Cu, Fe, Hg, Mn, Pb and Zn in mosses from MATV and was discussed its potential origin. The urban sites had the highest concentration of anthropogenic elements as Cr, Cu, Fe, Hg, Pb and Zn because are strongly impacted by roads with high vehicle traffic. (Author)

  1. Production of candidate natural matrix reference materials for micro-analytical techniques

    International Nuclear Information System (INIS)

    Zeisler, R.; Fajgelj, A.; Zeiller, E.

    2002-01-01

    Homogeneity is considered to be the most vital prerequisite for a certified reference material (CRM); more stringent requirements exist for the analysis of small subsamples. Many of the natural matrix CRMs are prepared from bulk samples by grinding and milling them to a certain particle size, which is expected to provide a more homogenous material; however recommended sample sizes for biological and environmental reference materials are found to be more than 100 mg. Since the milling of materials is costly and has some drawbacks, natural materials that already occur as small particles such as air particulate matter, certain sediments, and cellular biological materials may form the basis of the required reference materials. The nature of these materials, i.e. naturally occurring particles, may provide ideal model reference material. We describe here the production of the materials and preliminary tests, the evaluation for the micro-analytical techniques

  2. Identification of purple dye from molluscs on an excavated textile by non-destructive analytical techniques

    DEFF Research Database (Denmark)

    Margariti, Christina; Protopapas, Stavros; Allen, Norman

    2013-01-01

    , the application of non-destructive methods of investigation for the extraction of the data present is imperative. This paper presents the results of dye analysis performed on the excavated textile find HTR-73 from the Kerameikos cemetery in Athens. The Kerameikos textile find is from the 5th century BC, and has...... been preserved in association with copper. The techniques applied were Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray (EDX) analysis, Cathodoluminescence and micro Raman. For the first time Cathodoluminescence from an indigoid compound is reported. Comparison of the analysis results...... on samples from the find with the contemporary reference samples lead to the identification of purple dye as a dibromoindigo compound with the origin from molluscs of Murex trunculus species. The application of non-destructive analytical methods of investigation was successful in analysing dyes on excavated...

  3. Use of the analytical tree technique to develop a radiological protection program

    International Nuclear Information System (INIS)

    Domenech N, H.; Jova S, L.

    1996-01-01

    The results obtained by the Cuban Center for Radiological Protection and Hygiene by using an analytical tree technique to develop its general operational radiation protection program are presented. By the application of this method, some factors such as the organization of the radiation protection services, the provision of administrative requirements, the existing general laboratories requirements, the viability of resources and the current documentation was evaluated. Main components were considered such as: complete normative and regulatory documentation; automatic radiological protection data management; scope of 'on the-job'and radiological protection training for the personnel; previous radiological appraisal for the safety performance of the works and application of dose constrains for the personnel and the public. The detailed development of the program allowed to identify the basic aims to be achieved in its maintenance and improvement. (authors). 3 refs

  4. Investigation of different types of filters for atmospheric trace elements analysis by three analytical techniques

    International Nuclear Information System (INIS)

    Ali, A.E.; Bacso, J.

    1996-01-01

    Different atmospheric aerosol samples were collected on three types of filters. Disks of both loaded and clean areas of each kind of filter were investigated by XRF, PIXE and Scanning Electron Microscope (SEM) methods. The blank concentration values of the elements Al, Si, P, S, Cl, K, Ca, Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, As, Br and Pb in the three types of filters are discussed. It is found that for trace elemental analysis, the Nuclepore membrane filters are the most suitable for sampling. These have much lower blank element concentration values than the glass fibres and ash free filters. It was found also that the PIXE method is a more reliable analytical technique for atmospheric aerosol particles than the other methods. (author). 20 refs., 3 figs., 3 tabs

  5. Preparation of uranium targets and application of analytical techniques for its evaluation

    International Nuclear Information System (INIS)

    Luna Z, D.

    1994-01-01

    The objective of this work is to establish a method to produce uranium targets. The method selected for this purpose was the molecular plating. The first part of this work is devoted to the proper selection of an analytical technique to evaluate the different steps of the molecular plating method. Neutron Activation Analysis was chosen, because its high sensitivity and can be adapted easily to follow the whole procedure. The second part presents the experimental procedure and the study of the different parameters involved in the molecular plating and the evaluation of its uniformity was made using plastic track detectors. The results obtained are presented and a procedure is suggested to produce uranium targets. (Author)

  6. Role of nuclear analytical probe techniques in biological trace element research

    International Nuclear Information System (INIS)

    Jones, K.W.; Pounds, J.G.

    1985-01-01

    Many biomedical experiments require the qualitative and quantitative localization of trace elements with high sensitivity and good spatial resolution. The feasibility of measuring the chemical form of the elements, the time course of trace elements metabolism, and of conducting experiments in living biological systems are also important requirements for biological trace element research. Nuclear analytical techniques that employ ion or photon beams have grown in importance in the past decade and have led to several new experimental approaches. Some of the important features of these methods are reviewed here along with their role in trace element research, and examples of their use are given to illustrate potential for new research directions. It is emphasized that the effective application of these methods necessitates a closely integrated multidisciplinary scientific team. 21 refs., 4 figs., 1 tab

  7. On the analytical continuation of the partial wave S-matrix using complex scaling techniques

    International Nuclear Information System (INIS)

    Rittby, M.; Elander, N.; Braendas, E.

    1989-01-01

    The analytic properties of the partial wave S-matrix and related quantities are studied and numerically investigated. The analysis is carried out by means of integration along paths in the complex k-plane. The domain for the choice of integration contours can be rigorously defined by the use of complex scaling techniques. A generalization of Levinson's theorem incorporating the poles in the lower half k-plane is proved and exemplified. An expansion theorem for the partial wave S-matrix in terms of its poles and residues is derived and analyzed. The connections between poles and associated residues and their relationships with the Breit-Wigner ansatz and the Fano line shape parameters are discussed and numerically realized. Finally, the implications of the present development in connection with the inversion problem are indicated. (orig.)

  8. New analytical techniques for traffic management on the basis of system studies in logistics

    Directory of Open Access Journals (Sweden)

    Олександр Павлович Кіркін

    2017-07-01

    Full Text Available In today's market conditions, it is necessary for enterprises to constantly maintain their competitiveness. This is achieved through raising customer service standards and use of the latest management techniques. In most cases, enterprises adhere to the logistic principles to optimize production. Over time, however, the development of logistics resulted in emergence of its principal subdivisions: transport, storage, etc. Thus, nowadays there are several parallel methodological developments in the field of logistics and making up logistics chains and systems at different stages of the life cycle of the goods. System research in the field of warehouse logistics showed that the majority of its analytical models of management are based on task conflict. Similar tasks of managing traffic flows in transport logistics are solved by methods of SMO, graph theory, linear programming and differential equations of state etc. These methods are not more accurate than the methods of warehouse logistics, have similar important assumptions and simplifications, and require appropriate mathematical training and knowledge in the field of transport, and sometimes lack visible correlation with economic performance. New analytical techniques for the management of transportation systems based on task conflict will reduce the time and resources for optimization and finding solutions. Methods of warehousing logistics can only be used for the continuous transport quantities (intensity, speed, performance, capacity, execution of works, etc.. In the static condition the search for the optimal service intensity can be found in warehouse logistics. In the study of object in dynamics it is better to use transport approach. Some problems such as supplement of warehouse logistics models with elements of the transport task, are still to be decided

  9. Endotoxin exposure in sewage treatment workers: investigation of exposure variability and comparison of analytical techniques.

    Science.gov (United States)

    Spaan, Suzanne; Smit, Lidwien A M; Eduard, Wijnand; Larsson, Lennart; Arts, Huib J J M; Wouters, Inge M; Heederik, Dick J J

    2008-01-01

    Objectives were to give an overview of endotoxin exposure and its determinants in sewage treatment workers, and to study exposure to culturable and non-culturable microorganisms and the applicability of the LAL assay in this work environment. In 43 Dutch sewage treatment plants 470 full-shift, 123 task-based personal and 54 stationary inhalable dust samples were collected. Endotoxin concentration was determined with the LAL-assay. Mixed effects models were used to investigate possible determinants of exposure. Simultaneous parallel filter samples, impinger samples and viable total bacteria and Gram-negative bacterial samples were taken to compare analytical techniques. Filter and impinger samples were analyzed with the LAL-assay, gas chromatography-mass spectrometry (GC-MS) and fluorescence microscopy. Endotoxin exposure levels were moderate to low (geometric mean personal exposure 27 EU/m(3), stationary 33 EU/m(3), task-based 64 EU/m(3)), yet differences between jobs and sources and some determinants of exposure were identified. Exposure varied more from day to day than between workers. Concentrations in filter samples were higher and more consistent than in impinger samples. Fungi and Gram-positive bacteria were found in higher levels than Gram-negative bacteria. The LAL assay and GC-MS showed comparable endotoxin levels. Endotoxin exposure in Dutch sewage treatment workers was relatively low. Comparison of sampling and analytical techniques suggests that the LAL-assay did not result in much exposure misclassification. It thus seems justified to perform filter measurements in combination with the LAL-assay to measure endotoxin exposure in sewage treatment plants.

  10. Pedestrian-vehicle crashes and analytical techniques for stratified contingency tables.

    Science.gov (United States)

    Al-Ghamdi, Ali S

    2002-03-01

    In 1999 there were 450 fatalities due to road crashes in Riyadh, the capital of Saudi Arabia, of which 130 were pedestrians. Hence, every fourth person killed on the roads is a pedestrian. The aim of this study is to investigate pedestrian-vehicle crashes in this fast-growing city with two objectives in mind: to analyze pedestrian collisions with regard to their causes, characteristics, location of injury on the victim's body, and most common patterns and to determine the potential for use of the odds ratio technique in the analysis of stratified contingency tables. Data from 638 pedestrian-vehicle crashes reported by police, during the period 1997-1999, were used. A systematic sampling technique was followed in which every third record was used. The analysis showed that the pedestrian fatality rate per 10(5) population is 2.8. The rates were relatively high within the childhood (1-9 years) and young adult (10-19 years) groups, and the old-age groups (60 - > 80 years), which indicate that young as well as the elderly people in this city are more likely to be involved in fatal accidents of this type than are those in other age groups. The analysis revealed that 77.1% of pedestrians were probably struck while crossing a roadway either not in a crosswalk or where no crosswalk existed. In addition, the distribution of injuries on the victims' bodies was determined from hospital records. More than one-third of the fatal injuries were located on the head and chest. An attempt was made to conduct an association analysis between crash severity (i.e. injury or fatal) and some of the study variables using chi-square and odds ratio techniques. The categorical nature of the data helped in using these analytical techniques.

  11. An integrated approach using orthogonal analytical techniques to characterize heparan sulfate structure.

    Science.gov (United States)

    Beccati, Daniela; Lech, Miroslaw; Ozug, Jennifer; Gunay, Nur Sibel; Wang, Jing; Sun, Elaine Y; Pradines, Joël R; Farutin, Victor; Shriver, Zachary; Kaundinya, Ganesh V; Capila, Ishan

    2017-02-01

    Heparan sulfate (HS), a glycosaminoglycan present on the surface of cells, has been postulated to have important roles in driving both normal and pathological physiologies. The chemical structure and sulfation pattern (domain structure) of HS is believed to determine its biological function, to vary across tissue types, and to be modified in the context of disease. Characterization of HS requires isolation and purification of cell surface HS as a complex mixture. This process may introduce additional chemical modification of the native residues. In this study, we describe an approach towards thorough characterization of bovine kidney heparan sulfate (BKHS) that utilizes a variety of orthogonal analytical techniques (e.g. NMR, IP-RPHPLC, LC-MS). These techniques are applied to characterize this mixture at various levels including composition, fragment level, and overall chain properties. The combination of these techniques in many instances provides orthogonal views into the fine structure of HS, and in other instances provides overlapping / confirmatory information from different perspectives. Specifically, this approach enables quantitative determination of natural and modified saccharide residues in the HS chains, and identifies unusual structures. Analysis of partially digested HS chains allows for a better understanding of the domain structures within this mixture, and yields specific insights into the non-reducing end and reducing end structures of the chains. This approach outlines a useful framework that can be applied to elucidate HS structure and thereby provides means to advance understanding of its biological role and potential involvement in disease progression. In addition, the techniques described here can be applied to characterization of heparin from different sources.

  12. Integration of datasets from different analytical techniques to assess the impact of nutrition on human metabolome

    Directory of Open Access Journals (Sweden)

    Pamela eVernocchi

    2012-12-01

    Full Text Available Bacteria colonizing the human intestinal tract exhibit a high phylogenetic diversity that reflects their immense metabolic potentials. The catalytic activity of gut microbes has an important impact on gastrointestinal (GI functions and host health. The microbial conversion of carbohydrates and other food components leads to the formation of a large number of compounds that affect the host metabolome and have beneficial or adverse effects on human health. Meabolomics is a metabolic-biology system approach focused on the metabolic responses understanding of living systems to physio-pathological stimuli by using multivariate statistical data on human body fluids obtained by different instrumental techniques. A metabolomic approach based on an analytical platform could be able to separate, detect, characterize and quantify a wide range of metabolites and its metabolic pathways. This approach has been recently applied to study the metabolic changes triggered in the gut microbiota by specific diet components and diet variations, specific diseases, probiotic and synbiotic food intake.This review describes the metabolomic data obtained by analyzing human fluids by using different techniques and particularly Gas Chromatography Mass Spectrometry Solid-phase Micro Extraction (GC-MS/SPME, Proton Nuclear Magnetic Resonance (1H-NMR Spectroscopy and Fourier Transform Infrared (FTIR Spectroscopy. This instrumental approach have a good potential in the identification and detection of specific food intake and diseases biomarkers.

  13. Understanding changes over time in workers' compensation claim rates using time series analytical techniques.

    Science.gov (United States)

    Moore, Ian C; Tompa, Emile

    2011-11-01

    The objective of this study is to better understand the inter-temporal variation in workers' compensation claim rates using time series analytical techniques not commonly used in the occupational health and safety literature. We focus specifically on the role of unemployment rates in explaining claim rate variations. The major components of workers' compensation claim rates are decomposed using data from a Canadian workers' compensation authority for the period 1991-2007. Several techniques are used to undertake the decomposition and assess key factors driving rates: (i) the multitaper spectral estimator, (ii) the harmonic F test, (iii) the Kalman smoother and (iv) ordinary least squares. The largest component of the periodic behaviour in workers' compensation claim rates is seasonal variation. Business cycle fluctuations in workers' compensation claim rates move inversely to unemployment rates. The analysis suggests that workers' compensation claim rates between 1991 and 2008 were driven by (in order of magnitude) a strong negative long term growth trend, periodic seasonal trends and business cycle fluctuations proxied by the Ontario unemployment rate.

  14. The study of trace elements in milk by nuclear analytical techniques

    International Nuclear Information System (INIS)

    Gharib, A.; Rahimi, H.; Peyrovan, H.; Raofei, H.N.J.; Taherpour, H.

    1983-01-01

    This work is part of a project with the IAEA, in a coordinated programme on ''Trace Elements in Human Nutrition and Bio-Environmental Systems'' to evaluate their nutritional requirements, interrelations and the role of Trace Elements in health, metabolism etc. Cow's milk being regarded as one of the most important and nutritious foodstuffs consumed by people. Hence as a first step, an elemental analysis for milk was carried out for this purpose so a few samples of pasteurized milk and local samples were investigated for essential and toxic trace elements. The secondary aim of this project was the assessment of various analytical techniques involved. However, in the present work, the methods involved were AAS, PIXE and NAA. The latter method applied, both instrumentally and radiochemically. Although the results pertaining to the various methods employed are not in good agreement, there is however, some justification to clarify this internal inconsistency. The precision for NAA and AAS allows greater degree of acceptance respectively. Although PIXE is a very fast and rather a routine but the technique of trace element analysis needs certain adaptations and developments

  15. Analytical transform techniques to retrieve non-spherical particle size distribution

    International Nuclear Information System (INIS)

    Zhao, Jian-Qi; Li, Jiangnan

    2013-01-01

    The measurement of particle size distribution (PSD) from the extinction spectra is a challenging problem, especially for non-spherical particles. In this work, the analytical transform techniques are developed to retrieve PSD from the measured scattering data for a variety of shapes of non-spherical particle including spheroids, cuboids, triangular prisms, hexagonal prisms and elliptical cylinders. In the retrieve calculation, all particles have aligned orientations and their extinction cross sections can be adequately calculated by using the anomalous diffraction theory (ADT). It is shown that for each type of the considered non-spherical particles, there exists an ADT transform pair between the size distribution and the extinction spectrum. The inverse formula of PSD from the related ADT transform is therefore established. This result provides a new approach to the solution of the inversion problem and has the potential to be used in finding solutions for more complicated particle shapes. It is found that the solution of inverse scattering for absorbing particles can be simplified to a particular solution in which the character of absorption becomes no longer present. For spheroids, triangular prisms, and elliptical cylinders, the retrieved PSD and the corresponding true PSD always belong to one family of function, due to the scaling relation. Therefore an improper choice of inversion parameters does not significantly affect the type of mode of PSD in a retrieval process. -- Highlights: •Analytical schemes for inversion of non-spherical particle size distribution. •Intuitive inverse formulas and novel ADT transform fairs for non-spherical particles. •Useful scaling relations in retrievals for non-spherical particles

  16. Employing socially driven techniques for framing, contextualization, and collaboration in complex analytical threads

    Science.gov (United States)

    Wollocko, Arthur; Danczyk, Jennifer; Farry, Michael; Jenkins, Michael; Voshell, Martin

    2015-05-01

    The proliferation of sensor technologies continues to impact Intelligence Analysis (IA) work domains. Historical procurement focus on sensor platform development and acquisition has resulted in increasingly advanced collection systems; however, such systems often demonstrate classic data overload conditions by placing increased burdens on already overtaxed human operators and analysts. Support technologies and improved interfaces have begun to emerge to ease that burden, but these often focus on single modalities or sensor platforms rather than underlying operator and analyst support needs, resulting in systems that do not adequately leverage their natural human attentional competencies, unique skills, and training. One particular reason why emerging support tools often fail is due to the gap between military applications and their functions, and the functions and capabilities afforded by cutting edge technology employed daily by modern knowledge workers who are increasingly "digitally native." With the entry of Generation Y into these workplaces, "net generation" analysts, who are familiar with socially driven platforms that excel at giving users insight into large data sets while keeping cognitive burdens at a minimum, are creating opportunities for enhanced workflows. By using these ubiquitous platforms, net generation analysts have trained skills in discovering new information socially, tracking trends among affinity groups, and disseminating information. However, these functions are currently under-supported by existing tools. In this paper, we describe how socially driven techniques can be contextualized to frame complex analytical threads throughout the IA process. This paper focuses specifically on collaborative support technology development efforts for a team of operators and analysts. Our work focuses on under-supported functions in current working environments, and identifies opportunities to improve a team's ability to discover new information and

  17. Nuclear analytical techniques applied to the large scale measurements of atmospheric aerosols in the amazon region

    International Nuclear Information System (INIS)

    Gerab, Fabio

    1996-03-01

    This work presents the characterization of the atmosphere aerosol collected in different places of the Amazon Basin. We studied both the biogenic emission from the forest and the particulate material which is emitted to the atmosphere due to the large scale man-made burning during the dry season. The samples were collected during a three year period at two different locations in the Amazon, namely the Alta Floresta (MT) and Serra do Navio (AP) regions, using stacked unit filters. These regions represent two different atmospheric compositions: the aerosol is dominated by the forest natural biogenic emission at Serra do Navio, while at Alta Floresta it presents an important contribution from the man-made burning during the dry season. At Alta Floresta we took samples in gold in order to characterize mercury emission to the atmosphere related to the gold prospection activity in Amazon. Airplanes were used for aerosol sampling during the 1992 and 1993 dry seasons to characterize the atmospheric aerosol contents from man-made burning in large Amazonian areas. The samples were analyzed using several nuclear analytic techniques: Particle Induced X-ray Emission for the quantitative analysis of trace elements with atomic number above 11; Particle Induced Gamma-ray Emission for the quantitative analysis of Na; and Proton Microprobe was used for the characterization of individual particles of the aerosol. Reflectancy technique was used in the black carbon quantification, gravimetric analysis to determine the total atmospheric aerosol concentration and Cold Vapor Atomic Absorption Spectroscopy for quantitative analysis of mercury in the particulate from the Alta Floresta gold shops. Ionic chromatography was used to quantify ionic contents of aerosols from the fine mode particulate samples from Serra do Navio. Multivariate statistical analysis was used in order to identify and characterize the sources of the atmospheric aerosol present in the sampled regions. (author)

  18. Multi-criteria approach with linear combination technique and analytical hierarchy process in land evaluation studies

    Directory of Open Access Journals (Sweden)

    Orhan Dengiz

    2018-01-01

    Full Text Available Land evaluation analysis is a prerequisite to achieving optimum utilization of the available land resources. Lack of knowledge on best combination of factors that suit production of yields has contributed to the low production. The aim of this study was to determine the most suitable areas for agricultural uses. For that reasons, in order to determine land suitability classes of the study area, multi-criteria approach was used with linear combination technique and analytical hierarchy process by taking into consideration of some land and soil physico-chemical characteristic such as slope, texture, depth, derange, stoniness, erosion, pH, EC, CaCO3 and organic matter. These data and land mapping unites were taken from digital detailed soil map scaled as 1:5.000. In addition, in order to was produce land suitability map GIS was program used for the study area. This study was carried out at Mahmudiye, Karaamca, Yazılı, Çiçeközü, Orhaniye and Akbıyık villages in Yenişehir district of Bursa province. Total study area is 7059 ha. 6890 ha of total study area has been used as irrigated agriculture, dry farming agriculture, pasture while, 169 ha has been used for non-agricultural activities such as settlement, road water body etc. Average annual temperature and precipitation of the study area are 16.1oC and 1039.5 mm, respectively. Finally after determination of land suitability distribution classes for the study area, it was found that 15.0% of the study area has highly (S1 and moderately (S2 while, 85% of the study area has marginally suitable and unsuitable coded as S3 and N. It was also determined some relation as compared results of linear combination technique with other hierarchy approaches such as Land Use Capability Classification and Suitability Class for Agricultural Use methods.

  19. Atmospheric pollution in the Tula Industrial Corridor studied using a bio monitor and nuclear analytical techniques

    Energy Technology Data Exchange (ETDEWEB)

    Martinez C, M. A.; Solis, C.; Andrade, E. [UNAM, Instituto de Fisica, Apdo. Postal 20-364, 01000 Mexico D. F. (Mexico); Beltran H, R. I. [Universidad Autonoma del Estado de Hidalgo, Centro de Investigaciones Quimicas, Carretera Pachuca-Tulancingo Km. 4.5, 42184 Pachuca, Hidalgo (Mexico); Issac O, K. [Universidad Autonoma del Estado de Mexico, Facultad de Medicina, Paseo Tollocan s/n, esq. Jesus Carranza, 50120 Toluca, Estado de Mexico (Mexico); Lucho C, C. A. [Universidad Politecnica de Pachuca, Carretera Pachuca-Cd. Sahagun Km. 20, Hidalgo (Mexico); Lopez R, M. C.; Longoria, L. C. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)

    2011-02-15

    This study deals with the application of nuclear analytical techniques to analyze trace elements in the biological monitor Tillandsia usneoides. Biological monitors provides an alternative advantageous way of particulate matter sampling in air pollution studies, since there is no need of special sampling devices, accumulation time can be as long as desired. T. usneoides, which occurs naturally throughout Mexico, was used to monitor air quality of Tula-Vito-Apasco (TVA) industrial corridor at central Mexico. This area is considered one of the critical zones of the country because of atmospheric contaminants high concentration. Particulate matter is regulated by Mexican norms, but its chemical composition is not. Plants were transplanted from a clean environment to four sites at the TVA corridor, and exposed for 12 weeks from February to April 2008. Trace element accumulation of plants was determined by particle induced X-ray emission and neutron activation analysis. Results reveal differences in trace elements distribution among sites in the TVA corridor. Furthermore, anthropogenic elements (S, V) and crustal elements (Ca) in T. usneoides exhibit high levels. Highly toxic elements such as Hg, As and Cr although present at trace levels, showed un enrichment relative to the initial values, when transplanted to the TVA corridor. Results show that monitoring with T. usneoides allows a first approximation of air sources to provide insights of the atmospheric pollution in the TVA corridor. (Author)

  20. Development of rocket electrophoresis technique as an analytical tool in preformulation study of tetanus vaccine formulation.

    Science.gov (United States)

    Ahire, V J; Sawant, K K

    2006-08-01

    Rocket Electrophoresis (RE) technique relies on the difference in charges of the antigen and antibodies at the selected pH. The present study involves optimization of RE run conditions for Tetanus Toxoid (TT). Agarose gel (1% w/v, 20 ml, pH 8.6), anti-TT IgG - 1 IU/ml, temperature 4-8 degrees C and run duration of 18 h was found to be optimum. Height of the rocket-shaped precipitate was proportional to TT concentration. The RE method was found to be linear in the concentration range of 2.5 to 30 Lf/mL. The method was validated and found to be accurate, precise, and reproducible when analyzed statistically using student's t-test. RE was used as an analytical method for analyzing TT content in plain and marketed formulations as well as for the preformulation study of vaccine formulation where formulation additives were tested for compatibility with TT. The optimized RE method has several advantages: it uses safe materials, is inexpensive, and easy to perform. RE results are less prone to operator's bias as compared to flocculation test and can be documented by taking photographs and scanned by densitometer; RE can be easily standardized for the required antigen concentration by changing antitoxin concentration. It can be used as a very effective tool for qualitative and quantitative analysis and in preformulation studies of antigens.

  1. Characterization by FTIR and nuclear analytical techniques of CNx films elaborated by laser ablation

    International Nuclear Information System (INIS)

    Olea M, O.F.

    2003-01-01

    At the present time the technique of deposit of laser ablation is used to produce different types of thin films. At the moment in the National Institute of Nuclear Research (ININ) it is carried out an investigation on the thermoluminescent response of thin films of CN x with possible application in dosimetry of electromagnetic radiation. Under this context, the present work is part of this investigation and has as objective to characterize thin films of CN x by means of Infrared spectrometry and nuclear analytical techniques. The deposits were elaborated by laser ablation under different such experimental conditions as: pressure of Nitrogen in the system (3 x 10 -3 and 7.5 X 10 -2 Torr), Distance target-substrate (3 and 5 cm) and density of incident energy in the target (from 17.5 up to 23.8 J/cm 2 ). Graphite of high purity was used like target and the deposits were made on their substrates of intrinsic silicon (100). By means of infrared spectrometry by Fourier Transform (Ftir) the type of bonds which are in the structure of the films of CN x were determined. The spectra of this type of samples present in general four characteristic bands related with different types of bonds among the elements C, O, H, N such as: C-C, C-N, C-H, N-H, O-H, C=N, C≡N, among others. It was carried out a semi quantitative study of the samples isolating each band of the total infrared spectra and making a comparison between their intensities and forms. This study allowed to observe that there is a dependence of the structure of the films with regard to the time, since mainly bonds of the type Sp 3 between Hydrogen and Carbon (C-H) they presented a remarkable variation in intensity, increasing as it lapsed the time until reaching to a stabilization where the bonds already not varying. This increase probably is due to the absorption of water of the atmosphere, although one has seen in the literature that the incorporation of this compound in this type of samples affects mainly to the

  2. Combining Surface Analytical and Computational Techniques to Investigate Orientation Effects of Immobilized Proteins

    Science.gov (United States)

    Harrison, Elisa Turla

    Controlling how proteins are immobilized (e.g. controlling their orientation and conformation) is essential for developing and optimizing the performance of in vitro protein-binding devices, such as enzyme-linked immunosorbent assays. The objective of this work is to develop new methodologies to study proteins and complex mixtures of proteins immobilized onto surfaces. The focus of this study was to control and characterize the orientation of protein G B1, an IgG antibody-binding domain of protein G, on well-defined surfaces as well as measure the effect of protein G B1 orientation on IgG antibody binding using a variety of surface analytical and computational techniques. The surface sensitivity of time-of-flight secondary ion mass spectrometry (ToF-SIMS) was used to distinguish between different proteins and their orientation by monitoring the changes in intensity of characteristic amino acid mass fragments. Amino acids distributed asymmetrically were used to calculate peak intensity ratios from ToF-SIMS data to determine the orientation of five different cysteine mutants of protein G B1 covalently attached to a maleimide surface. To study the effect of protein orientation on antibody binding, we formed multilayer protein films by binding IgG to protein G B1 films. Quartz crystal microbalance with dissipation monitoring (QCM-D) detected protein coverages of 69-130 ng/cm2 (theoretical mass of a monolayer of protein G B1 is 110-160 ng/cm2). QCM-D and X-ray photoelectron spectroscopy analysis revealed that packing density along with orientation affected the antibody binding process. Spectra from ToF-SIMS using large Ar gas cluster ion sources distinguished between different proteins in multilayer protein systems. A Monte Carlo algorithm was developed to predict protein orientation on surfaces. Two distinct orientations of protein G B1 adsorbed onto a hydrophobic surface were found and characterized as two mutually exclusive sets of amino acids on the outermost

  3. An Overview of Analytical Determination of Diltiazem, Cimetidine, Ranitidine, and Famotidine by UV Spectrophotometry and HPLC Technique

    Directory of Open Access Journals (Sweden)

    Nighat Shafi

    2013-01-01

    Full Text Available This review article recapitulates the analytical methods for the quantitative determinations of diltiazem and three H2 receptor antagonists (cimetidine, ranitidine, and famotidine by one of the spectroscopic technique (UV spectrophotometery and separation technique such as high-performance liquid chromatography (HPLC. The clinical and pharmaceutical analysis of these drugs requires effective analytical procedures for quality control, pharmaceutical dosage formulations, and biological fluids. An extensive survey of the literature published in various analytical and pharmaceutical chemistry-related journals has been compiled in its review. A synopsis of reported spectrophotometric and high-performance liquid chromatographic methods for individual drug is integrated. This appraisal illustrates that majority of the HPLC methods reviewed are based on the quantitative analysis of drugs in biological fluids, and they are appropriate for therapeutic drug monitoring purpose.

  4. Computational efficiency study of a semi-analytical technique for the angular integral estimation found in transfer matrix generation

    International Nuclear Information System (INIS)

    Garcia, R.D.M.

    1984-01-01

    The computational efficiency of a semi-analytic technique recently proposed for the evaluation of certain angular integrals encountered in the generation of the isotropic and linearly anisotropic components of elastic and discrete inelastic transfer matrices is studied. It is concluded from a comparison with results obtained with the use of numerical quadratures that the technique has certain computational advantages that recommend its implementation. (Author) [pt

  5. Adsorptive micro-extraction techniques--novel analytical tools for trace levels of polar solutes in aqueous media.

    Science.gov (United States)

    Neng, N R; Silva, A R M; Nogueira, J M F

    2010-11-19

    A novel enrichment technique, adsorptive μ-extraction (AμE), is proposed for trace analysis of polar solutes in aqueous media. The preparation, stability tests and development of the analytical devices using two geometrical configurations, i.e. bar adsorptive μ-extraction (BAμE) and multi-spheres adsorptive μ-extraction (MSAμE) is fully discussed. From the several sorbent materials tested, activated carbons and polystyrene divinylbenzene phases demonstrated the best stability, robustness and to be the most suitable for analytical purposes. The application of both BAμE and MSAμE devices proved remarkable performance for the determination of trace levels of polar solutes and metabolites (e.g. pesticides, disinfection by-products, drugs of abuse and pharmaceuticals) in water matrices and biological fluids. By comparing AμE techniques with stir bar sorptive extraction based on polydimethylsiloxane phase, great effectiveness is attained overcoming the limitations of the latter enrichment approach regarding the more polar solutes. Furthermore, convenient sensitivity and selectivity is reached through AμE techniques, since the great advantage of this new analytical technology is the possibility to choose the most suitable sorbent to each particular type of application. The enrichment techniques proposed are cost-effective, easy to prepare and work-up, demonstrating robustness and to be a remarkable analytical tool for trace analysis of priority solutes in areas of recognized importance such as environment, forensic and other related life sciences. Copyright © 2010 Elsevier B.V. All rights reserved.

  6. IBM SPSS modeler essentials effective techniques for building powerful data mining and predictive analytics solutions

    CERN Document Server

    McCormick, Keith; Wei, Bowen

    2017-01-01

    IBM SPSS Modeler allows quick, efficient predictive analytics and insight building from your data, and is a popularly used data mining tool. This book will guide you through the data mining process, and presents relevant statistical methods which are used to build predictive models and conduct other analytic tasks using IBM SPSS Modeler. From ...

  7. Ibm spss modeler essentials effective techniques for building powerful data mining and predictive analytics solutions

    CERN Document Server

    McCormick, Keith; Wei, Bowen

    2017-01-01

    IBM SPSS Modeler allows quick, efficient predictive analytics and insight building from your data, and is a popularly used data mining tool. This book will guide you through the data mining process, and presents relevant statistical methods which are used to build predictive models and conduct other analytic tasks using IBM SPSS Modeler. From ...

  8. Study on homogeneity of multielements for a stream sediment matrix material with nuclear analytical techniques

    International Nuclear Information System (INIS)

    Donghui Huang; Caijin Xiao; Bangfa Ni; Weizhi Tian; Pingsheng Wang; CunXiong Liu; Guiying Zhang; Hongchao Sun; Haiqing Zhang; Changjun Zhao; Yuanxun Zhang

    2012-01-01

    Taking advantages of nuclear analytical techniques (NATs) with non-destruction, multielement capability, small and estimable uncertainties over a wide range of sample sizes, the sampling behavior of multielements for a home-made natural matrix material was studied with sample sizes ranging from several hundred mg down to tenths ng, namely nine orders of magnitude, by a combination of three NATs, neutron activation analysis (NAA), proton induced X-ray emission (PIXE) and synchrotron radiation X-ray fluorescence (SR-XRF), in an effort to explore a procedure for the development of certified reference materials (CRMs) suitable for quality control of microanalysis. For accurately weighable sample sizes (>1 mg), sampling uncertainties for 13 elements were found to be less than 1% by INAA. For sample sizes unable to be accurately weighed (<1 mg), PIXE and SR-XRF were used, respectively. Sampling uncertainties were found to be less than 1% at sample sizes of tenth mg level for seven elements, and less than 10% on ng levels for three elements. Considering these three elements have satisfied homogeneity (sampling uncertainty less than 10%) at ng sample size level, any one of them can be served as a 'relative balance' in sampling behavior characterization of multielements on sample size levels larger than ng (e.g., μg level). On this basis, sampling uncertainties for nine elements were found to be less than 10% on μg sample size level by INAA. The results indicate that the matrix is eligible as a candidate of CRMs suitable for quality control of solid sampling microanalysis. (author)

  9. Novel analytical technique to study nucleobase influence on DNA strand breaks caused by direct ionizing radiation

    International Nuclear Information System (INIS)

    Watson, R.M.; Bernhard, W.A.

    2009-01-01

    Complete text of publication follows. Analysis of the reactions involved in the direct effect of ionizing radiation on DNA is crucial to assessing the risks related with exposure at low dose. The direct interaction of ionizing radiation with DNA initially results in free radicals situated on bases and the backbone, which eventually lead to stable end products that include strand breaks (sb) and free nucleobase release (fbr). The yields of these two products are thought to be related because ejection of an electron from the DNA backbone produces a radical cation that deprotonates to yield a neutral carbon-centered deoxyribose radical. These neutral radicals react when dissolved to produce one strand break and one free base each. Therefore fbr can be used as an indicator of sb. It is commonly presumed that that sb occur independent of the surrounding base context. However recent studies have indicated that a base may indeed have influence over the probability of sb at its backbone unit. In one such study, films prepared from 10- to 30-mer DNA duplexes were irradiated at RT under air using X-rays generated by a tungsten tube operated at 70 kV. The films were dissolved in nuclease free water and stored at 277 K. Unaltered free base release was measured using HPLC, and the yields determined for each base were not strictly proportionate to their presence in the DNA sequence. In fact, this study indicated that strand breaks may be influenced by a number of factors including position within the oligomer as well as the base and its base context. The current study involves further analysis of these factors; instead of using HPLC to separate and measure fbr, which is time consuming and expensive, a novel analytical technique is being used to determine the amount and ratio of fbr for each of the four bases. This technique involves separation of free bases from bulk DNA using filters followed by decomposition of the UV spectra of mixtures of bases at different pH. Decomposition

  10. A review on analytical techniques for natural convection investigation in a heated closed enclosure: Case study

    Directory of Open Access Journals (Sweden)

    Minea Alina Adriana

    2015-01-01

    Full Text Available The aim of this paper is to present a theoretical analysis of a few convection problems. The investigations were started from the geometry of a classic muffle manufactured furnace. During this analytical study, different methodologies have been carefully chosen in order to compare and evaluate the effects of applying different analytical methods of the convection heat transfer processes. In conclusion, even if there are available a lot of analytical methods, natural convection in enclosed enclosures can be studied correctly only with numerical analysis. Also, in this article is presented a case study on natural convection application in a closed heated enclosure.

  11. Performance Marketing with Google Analytics Strategies and Techniques for Maximizing Online ROI

    CERN Document Server

    Tonkin, Sebastian

    2010-01-01

    An unparalleled author trio shares valuable advice for using Google Analytics to achieve your business goals. Google Analytics is a free tool used by millions of Web site owners across the globe to track how visitors interact with their Web sites, where they arrive from, and which visitors drive the most revenue and sales leads. This book offers clear explanations of practical applications drawn from the real world. The author trio of Google Analytics veterans starts with a broad explanation of performance marketing and gets progressively more specific, closing with step-by-step analysis and a

  12. Use of nuclear and related analytical techniques in environmental research as exemplified by selected air pollution studies

    International Nuclear Information System (INIS)

    Smodis, B.; Jacimovic, R.; Jeran, Z.; Stropnik, B.; Svetina, M.

    2000-01-01

    Among nuclear and nuclear related analytical techniques, neutron activation analysis and X-ray fluorescence spectrometry proved to be particularly useful for environmental studies owing to their nondestructive character and multi element capability. This paper emphasizes their importance among other multielement analytical methods by discussing their specific role due to specific physics basis, quite different to other destructive non-nuclear methods, and by summarizing results obtained in several studies related to air pollution research, including analyses of airborne particulate matter, water samples, lichens and mosses. (author)

  13. Biomimetic polymers in analytical chemistry. Part 1: preparation and applications of MIP (Molecularly Imprinted Polymers) in extraction and separation techniques

    International Nuclear Information System (INIS)

    Tarley, Cesar Ricardo Teixeira; Sotomayor, Maria del Pilar Taboada; Kubota, Lauro Tatsuo

    2005-01-01

    MIPs are synthetic polymers that are used as biomimetic materials simulating the mechanism verified in natural entities such as antibodies and enzymes. Although MIPs have been successfully used as an outstanding tool for enhancing the selectivity or different analytical approaches, such as separation science and electrochemical and optical sensors, several parameters must be optimized during their synthesis. Therefore, the state-of-the-art of MIP production as well as the different polymerization methods are discussed. The potential selectivity of MIPs in the extraction and separation techniques focusing mainly on environmental, clinical and pharmaceutical samples as applications for analytical purposes is presented. (author)

  14. A pirólise como técnica analítica Pyrolysis as an analytical technique

    Directory of Open Access Journals (Sweden)

    Flaviano Oliveira Silvério

    2008-01-01

    Full Text Available In this paper historical aspects of analytical pyrolysis, the equipment used, the fundamentals and the mechanisms of pyrolysis of different polymeric materials are discussed. The latest work on analytical pyrolysis applied to various types of synthetic and natural samples is reviewed. Current applications of this technique that are discussed include identification of microorganisms, analysis of trace compounds by forensic laboratories, investigation of food and agricultural products, study of the chemical composition of wood, authentication and conservation of artworks, and the study of environmental and geochemical samples.

  15. Twelfth ISAS national symposium on analytical techniques for safety and sufficiency of natural resources/products: technical papers

    International Nuclear Information System (INIS)

    Padmanabhan, P.K.; Page, A.G.

    1997-02-01

    This volume contains the proceedings of the ISAS (Indian Society of Analytical Scientists) national symposium. The main thrust of the symposium was on new fuel cycle technologies relevant to thorium utilisation programmes. The technologies for different separation processes, techniques for measurements of various process parameters and highly sensitive analytical methods for the determination of the chemical constituents were among the other topics covered. Quality upgradation, standardisation of methods and validation of measurements which are integral parts of product evaluation were also discussed. Papers relevant to INIS are indexed separately

  16. Analytical chemistry in semiconductor manufacturing: Techniques, role of nuclear methods and need for quality control

    International Nuclear Information System (INIS)

    1989-06-01

    This report is the result of a consultants meeting held in Gaithersburg, USA, 2-3 October 1987. The meeting was hosted by the National Bureau of Standards and Technology, and it was attended by 18 participants from Denmark, Finland, India, Japan, Norway, People's Republic of China and the USA. The purpose of the meeting was to assess the present status of analytical chemistry in semiconductor manufacturing, the role of nuclear analytical methods and the need for internationally organized quality control of the chemical analysis. The report contains the three presentations in full and a summary report of the discussions. Thus, it gives an overview of the need of analytical chemistry in manufacturing of silicon based devices, the use of nuclear analytical methods, and discusses the need for quality control. Refs, figs and tabs

  17. Radioactive particles in the environment: sources, particle characterization and analytical techniques

    International Nuclear Information System (INIS)

    2011-08-01

    Over the years, radioactive particles have been released to the environment from nuclear weapons testing and nuclear fuel cycle operations. However, measurements of environmental radioactivity and any associated assessments are often based on the average bulk mass or surface concentration, assuming that radionuclides are homogeneously distributed as simple ionic species. It has generally not been recognised that radioactive particles present in the environment often contain a significant fraction of the bulk sample activity, leading to sample heterogeneity problems and false and/or erratic measurement data. Moreover, the inherent differences in the transport and bioavailability of particle bound radionuclides compared with those existing as molecules or ions have largely been ignored in dose assessments. To date, most studies regarding radionuclide behaviour in the soil-plant system have dealt with soluble forms of radionuclides. When radionuclides are deposited in a less mobile form, or in case of a superposition of different physico-chemical forms, the behaviour of radionuclides becomes much more complicated and extra efforts are required to provide information about environmental status and behaviour of radioactive particles. There are currently no documents or international guides covering this aspect of environmental impact assessments. To fill this gap, between 2001 and 2008 the IAEA performed a Coordinated Research Programme (CRP- G4.10.03) on the 'Radiochemical, Chemical and Physical Characterization of Radioactive Particles in the Environment' with the objective of development, adoption and application of standardized analytical techniques for the comprehensive study of radioactive particles. The CRP was in line with the IAEA project intended to assist the Member States in building capacity for improving environmental assessments and for management of sites contaminated with radioactive particles. This IAEA-TECDOC presents the findings and achievements of

  18. Recent Studies on the Speciation and Determination of Mercury in Different Environmental Matrices Using Various Analytical Techniques

    Directory of Open Access Journals (Sweden)

    Lakshmi Narayana Suvarapu

    2017-01-01

    Full Text Available This paper reviews the current research on the speciation and determination of mercury by various analytical techniques, including the atomic absorption spectrometry (AAS, voltammetry, inductively coupled plasma optical emission spectrometry (ICP-OES, ICP-mass spectrometry (MS, atomic fluorescence spectrometry (AFS, spectrophotometry, spectrofluorometry, and high performance liquid chromatography (HPLC. Approximately 96 research papers on the speciation and determination of mercury by various analytical instruments published in international journals since 2015 were reviewed. All analytical parameters, including the limits of detection, linearity range, quality assurance and control, applicability, and interfering ions, evaluated in the reviewed articles were tabulated. In this review, we found a lack of information in speciation studies of mercury in recent years. Another important conclusion from this review was that there were few studies regarding the concentration of mercury in the atmosphere.

  19. Role of modern analytical techniques in the production of uranium metal

    International Nuclear Information System (INIS)

    Hareendran, K.N.; Roy, S.B.

    2009-01-01

    Production of nuclear grade uranium metal conforming to its stringent specification with respect to metallic and non metallic impurities necessitates implementation of a comprehensive quality control regime. Founding members of Uranium Metal Plant realised the importance of this aspect of metal production and a quality control laboratory was set up as part of the production plant. In the initial stages of its existence, the laboratory mainly catered to the process control analysis of the plant process samples and Spectroscopy Division and Analytical Division of BARC provided analysis of trace metallic impurities in the intermediates as well as in the product uranium metal. This laboratory also provided invaluable R and D support for the optimization of the process involving both calciothermy and magnesiothermy. Prior to 1985, analytical procedures used were limited to classical methods of analysis with minimal instrumental procedures. The first major analytical instrument, a Flame AAS was installed in 1985 and a beginning to the trace analysis was made. However during the last 15 years the Quality Control Section has modernized the analytical set up by acquiring appropriate instruments. Presently the facility has implemented a complete quality control and quality assurance program required to cover all aspects of uranium metal production viz analysis of raw materials, process samples, waste disposal samples and also determination of all the specification elements in uranium metal. The current analytical practices followed in QCS are presented here

  20. A technique for setting analytical thresholds in massively parallel sequencing-based forensic DNA analysis.

    Science.gov (United States)

    Young, Brian; King, Jonathan L; Budowle, Bruce; Armogida, Luigi

    2017-01-01

    Amplicon (targeted) sequencing by massively parallel sequencing (PCR-MPS) is a potential method for use in forensic DNA analyses. In this application, PCR-MPS may supplement or replace other instrumental analysis methods such as capillary electrophoresis and Sanger sequencing for STR and mitochondrial DNA typing, respectively. PCR-MPS also may enable the expansion of forensic DNA analysis methods to include new marker systems such as single nucleotide polymorphisms (SNPs) and insertion/deletions (indels) that currently are assayable using various instrumental analysis methods including microarray and quantitative PCR. Acceptance of PCR-MPS as a forensic method will depend in part upon developing protocols and criteria that define the limitations of a method, including a defensible analytical threshold or method detection limit. This paper describes an approach to establish objective analytical thresholds suitable for multiplexed PCR-MPS methods. A definition is proposed for PCR-MPS method background noise, and an analytical threshold based on background noise is described.

  1. Biomonitoring of air pollution in Jamaica through trace-element analysis of epiphytic plants using nuclear and related analytical techniques

    International Nuclear Information System (INIS)

    Vutchkov, Mitko

    2001-01-01

    The main goal of the Coordinated Research Project (No:9937/R0), entitled 'Biomonitoring of Air Pollution in Jamaica Through Trace-Element Analysis of Epiphytic Plants Using Nuclear and Related Analytical Techniques', is to identify and validate site specific epiphytic plants for biomonitoring the atmospheric pollution in Jamaica using nuclear analytical techniques at the International Centre for Environmental and Nuclear Sciences (ICENS). The specific objectives for the second year of the project were: Development of HOP for sampling epiphytic plants in Jamaica; Sampling design and sample collection; Sample preparation and analysis; Development of an in-house SRM and participation in the NAT-5 inter-laboratory study; Data analysis and interpretation of the results; Development of a work plan of the third year of the project

  2. Workplace and occupational health: The first metal evaluation using nuclear and analytical techniques in the State of Minas Gerais, Brazil

    International Nuclear Information System (INIS)

    Barros Correia Menezes, M.A. de; Vilhena Schayer Sabino, C. de; Melo Mattos, S.V. de; Santos Filho, S.; Diniz, E.

    1998-01-01

    Belo Horizonte, the capital of the State of Minas Gerais and its neighbourhood are the second industrial center of Brazil, concentrating many industries in several areas mainly metal refining and transformation. There are no registers about the level of metal concentration in the environmental air in the industry, nor even of the level of workers' contamination. The overall objective of this Project is to make a survey of the exposures to metals related to occupational diseases in galvanizing industry, which is responsible for the majority of occurrences of occupational diseases. The survey will be accomplished using as bio-indicators hair, nails, blood, urine, and individual air filters. These matrixes will indicate the incorporation of metals and the exposure level. The analytical techniques that will be applied are the neutron activation joined to related non nuclear analytical techniques, such as atomic absorption. (author)

  3. A new multi-step technique with differential transform method for analytical solution of some nonlinear variable delay differential equations.

    Science.gov (United States)

    Benhammouda, Brahim; Vazquez-Leal, Hector

    2016-01-01

    This work presents an analytical solution of some nonlinear delay differential equations (DDEs) with variable delays. Such DDEs are difficult to treat numerically and cannot be solved by existing general purpose codes. A new method of steps combined with the differential transform method (DTM) is proposed as a powerful tool to solve these DDEs. This method reduces the DDEs to ordinary differential equations that are then solved by the DTM. Furthermore, we show that the solutions can be improved by Laplace-Padé resummation method. Two examples are presented to show the efficiency of the proposed technique. The main advantage of this technique is that it possesses a simple procedure based on a few straight forward steps and can be combined with any analytical method, other than the DTM, like the homotopy perturbation method.

  4. Quantification of process induced disorder in milled samples using different analytical techniques

    DEFF Research Database (Denmark)

    Zimper, Ulrike; Aaltonen, Jaakko; McGoverin, Cushla M.

    2012-01-01

    The aim of this study was to compare three different analytical methods to detect and quantify the amount of crystalline disorder/ amorphousness in two milled model drugs. X-ray powder diffraction (XRPD), differential scanning calorimetry (DSC) and Raman spectroscopy were used as analytical methods...... and indomethacin and simvastatin were chosen as the model compounds. These compounds partly converted from crystalline to disordered forms by milling. Partial least squares regression (PLS) was used to create calibration models for the XRPD and Raman data, which were subsequently used to quantify the milling...

  5. Achievements in resonance Raman spectroscopy review of a technique with a distinct analytical chemistry potential

    NARCIS (Netherlands)

    Efremov, E.V.; Ariese, F.; Gooijer, C.

    2008-01-01

    In an extended introduction, key aspects of resonance Raman spectroscopy (RRS) such as enhanced sensitivity and selectivity are briefly discussed in comparison with normal RS. The analytical potential is outlined. Then achievements in different fields of research are highlighted in four sections,

  6. Analytical techniques for the determination of radiochemical purity of radiopharmaceuticals prepared from kits. Part II

    International Nuclear Information System (INIS)

    MacLean, J.R.; Rockwell, L.J.; Welsh, W.J.

    The evaluation of efficacy of commercially available kits used for the preparation of radiopharmaceuticals is one aspect of the Radiation Protection Bureau's radiopharmaceutical quality control program. This report describes some of the analytical methodology employed in the program. Many of the tests can be performed rapidly and with a minimum of special equipment, thus enabling the confirmation of radiopharmaceutical purity prior to patient administration

  7. Capillary electromigration techniques for studying interactions between analytes and lipid dispersions

    Czech Academy of Sciences Publication Activity Database

    Wiedmer, S. K.; Lokajová, Jana

    2013-01-01

    Roč. 36, č. 1 (2013), s. 37-51 ISSN 1615-9306 Grant - others:Helsinki Research Funds(FI) 2105060 Institutional support: RVO:61388963 Keywords : electrokinetic chromatography * frontal analysis * liposome * microchips * partial filling Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 2.594, year: 2013

  8. Identification of purple dye from molluscs on an excavated textile by non-destructive analytical techniques

    DEFF Research Database (Denmark)

    Margariti, Christina; Protopapas, Stavros; Allen, Norman

    2013-01-01

    on samples from the find with the contemporary reference samples lead to the identification of purple dye as a dibromoindigo compound with the origin from molluscs of Murex trunculus species. The application of non-destructive analytical methods of investigation was successful in analysing dyes on excavated...

  9. Numerical-analytic technique for investigation of solutions of some nonlinear equations with Dirichlet conditions

    Czech Academy of Sciences Publication Activity Database

    Rontó, András; Rontó, M.; Holubová, G.; Nečesal, P.

    -, - (2011), s. 58 ISSN 1687-2770 Institutional research plan: CEZ:AV0Z10190503 Keywords : nonlinear boundary value problem * numerical-analytic method * Chebyshev interpolation polynomials Subject RIV: BA - General Mathematics Impact factor: 0.911, year: 2011 http://www.boundaryvalueproblems.com/content/2011/1/58/abstract

  10. Using Photocatalytic Oxidation and Analytic Techniques to Remediate Lab Wastewater Containing Methanol

    Science.gov (United States)

    Xiong, Qing; Luo, Mingliang; Bao, Xiaoming; Deng, Yurong; Qin, Song; Pu, Xuemei

    2018-01-01

    This experiment is dedicated to second-year and above undergraduates who are in their experimental session of the analytical chemistry course. Grouped students are required to use a TiO[subscript 2] photocatalytic oxidation process to treat the methanol-containing wastewater that resulted from their previous HPLC experiments. Students learn to…

  11. The earrings of Pancas treasure: Analytical study by X-ray based techniques – A first approach

    Energy Technology Data Exchange (ETDEWEB)

    Tissot, I., E-mail: isabel.tissot@archeofactu.pt [Archeofactu – Rua do Cerrado das Oliveiras, No. 14, 2°Dto., 2610-035 Alfragide (Portugal); Tissot, M., E-mail: matthias.tissot@archeofactu.pt [Archeofactu – Rua do Cerrado das Oliveiras, No. 14, 2°Dto., 2610-035 Alfragide (Portugal); Museu Nacional de Arqueologia – Praça do Império, 1400-206 Lisboa (Portugal); Manso, M., E-mail: marta974@gmail.com [Centro de Física Atómica da Universidade de Lisboa, Av., Prof. Gama Pinto 2, 1649-003 Lisboa (Portugal); Alves, L.C., E-mail: luisa@cii.fc.ul.pt [IST/ITN, Univ. Técnica de Lisboa, E.N. 10, UFA-LFI, 2686-953 Sacavém (Portugal); Barreiros, M.A., E-mail: alexandra.barreiros@lneg.pt [LNEG, I.P., Estrada do Paço do Lumiar 22, 1649-038 Lisboa (Portugal); Marcelo, T., E-mail: teresa.marcelo@lneg.pt [LNEG, I.P., Estrada do Paço do Lumiar 22, 1649-038 Lisboa (Portugal); Carvalho, M.L., E-mail: lcalves@itn.pt [Centro de Física Atómica da Universidade de Lisboa, Av., Prof. Gama Pinto 2, 1649-003 Lisboa (Portugal); Corregidor, V., E-mail: vicky.corregidor@itn.pt [IST/ITN, Univ. Técnica de Lisboa, E.N. 10, UFA-LFI, 2686-953 Sacavém (Portugal); Guerra, M.F., E-mail: maria.guerra@culture.gouv.fr [Centre de Recherche et de Restauration des Musées de France and UMR8220 CNRS - 14, quai François Mitterrand, 75001 Paris (France)

    2013-07-01

    The development of new metallurgical technologies in the Iberian Peninsula during the Iron Age is well represented by the 10 gold earrings from the treasure of Pancas. This work presents a first approach to the analytical study of these earrings and contributes to the construction of a typological evolution of the Iberian earrings. The manufacture techniques and the alloys composition were studied with three complementary X-ray spectroscopy techniques: portable EDXRF, μ-PIXE and SEM–EDS. The results were compared with earrings from the same and previous periods.

  12. Nuclear analytical techniques applied to the research on biokinetics of incorporated radionuclides for internal dosimetry

    International Nuclear Information System (INIS)

    Cantone, M.C.

    2005-01-01

    Full text: The presentation intends to discuss the contribution that techniques of analysis, based on activation analysis or mass spectrometry, can give to a very selected item of the protection against ionizing radiation: the biokinetics of relevant elements. The assessment of radiation dose to body tissues, following intakes of radionuclides in occupational, accidental exposures and environmental exposure in case of dispersion in the environment of radio contaminants of potential concerns, is essential to evaluate and manage the the related radiological risk, including the decisions and actions to be undertake. Internal dose is not directly measurable and the International Commission on Radiological Protection ICRP has developed models which describes the behavior of the substances in the human body, following their entry ways by inhalation or ingestion. Generally, all the available sources of information contribute in the modeling process, including studies on animals, use of chemical analogues and, obviously direct information on humans, which is definitely the preferred source on which a biokinetic model can be based. Biokinetic data on human are available for most of the biological essential elements (Fe, Zn, Cu, Se) and for some elements the metabolic behavior is well know due to their use in clinical application (I, Sr, Tc), moreover research is in progress for non-essential alpha emitters. However, for a number of element, including elements with radionuclide of radiological significance in case of environmental contamination (Ru, Zr, Ce, Te and Mo), human data are poor or missing and biokinetic parameters are essentially extrapolated from data on animals. The use of stable isotopes is a publicly well acceptable and ethically justifiable method, compared to the use of radioisotopes, when volunteer subjects are considered in the investigations. The design of the investigation is based on the double tracer approach: one isotope is given orally and a second

  13. Comparison between energy dispersive X-ray fluorescence and other nuclear analytical techniques in mineral exploration and mining

    International Nuclear Information System (INIS)

    Clayton, C.G.; Packer, T.W.; Wormald, M.R.

    1979-01-01

    At the present time there is an increasing awareness of the value and need for in-situ analytical methods throughout the general area of mineral exploration and mining. Of the alternative techniques, the measurement of natural gamma radiation is well established for uranium exploration and it is now being developed for sea-bed and lake-bed surveying. Energy dispersive X-ray fluorescence equipment is becoming more generally accepted, especially for mine control. Neutron techniques, for so long used routinely in oil well logging, are now being developed for a wide range of applications in all aspects of exploration and mining. It is believed that these techniques will result in major applications in the future. The present paper compares the principal characteristics of energy dispersive X-ray fluorescence and neutron techniques in particular, with special emphasis being given to those factors which affect the accuracy of analytical content; such as elemental resolution, matrix effects, material heterogeneity and neutron transport. A generalised comparison between the techniques is difficult to achieve because of the different nature of radiation interactions, but a range of applications is described and these show the complementary nature of the methods and point to the areas for more active development in the future. (author)

  14. A REVIEW ON THE ANALYTICAL TECHNIQUES USED FOR THE DETERMINATION OF PARACETAMOL IN PHARMACEUTICAL FORMULATIONS AND BIOLOGICAL FLUIDS

    Directory of Open Access Journals (Sweden)

    Aisha Noreen

    2016-12-01

    Full Text Available Paracetamol (PM is an active metabolite of phenacetin and belongs to p-aminophenol derivatives. It is also termed as acetaminophen. PM is one of the non-steroidal anti-inflammatory drugs (NSAIDs which is used as an analgesic and antipyretic agent. It is an OTC drug and is used as a common household analgesic. It is not used as a substitute of aspirin or any other NSAIDs. It is a weak cyclooxygenase (COX 1 and 2 inhibitor but may inhibit COX-3 in the central nervous system. Many analytical techniques have been used for the assay of PM in pharmaceutical preparations and biological fluids. These techniques include spectrometry, chromatography, spectrofluorimetry, chemiluminescence, electrochemical techniques, flow injection spectrometry and chronoamperometry. In many pharmaceutical preparations PM is also used in combination with other drugs and these techniques have also been used for their simultaneous determination. A detailed review of various analytical techniques used for the assay of PM has been carried out which would be of great help to the chemists and pharmacists involved in the analysis and quality control of drugs.

  15. Terracotta polychrome sculptures examined before and after their conservation work: contributions from non-invasive in situ analytical techniques.

    Science.gov (United States)

    Colombo, C; Bevilacqua, F; Brambilla, L; Conti, C; Realini, M; Striova, J; Zerbi, G

    2011-08-01

    The potential of non-invasive in situ analytical techniques such as portable Raman, portable X-ray fluorescence, portable optical microscope and fibre optics reflectance spectroscopy has been shown studying painted layers of Renaissance terracotta polychrome sculptures belonging to the statuary of Santo Sepolcro Church in Milan. The results obtained allowed pointing out the contribution of these techniques to the compositional diagnostic, providing complete information, in some cases, better than micro-destructive techniques, on the kind of pigments used on the external painted layers. Moreover, a comparison with the results obtained before the last conservation work (2009) with micro-destructive techniques allowed ascertaining the removal of the external painted layers during the conservation operations.

  16. Mathematical modelling of two-analyte sequential determinations by flow-injection sandwich-techniques

    International Nuclear Information System (INIS)

    Montesinos, J.L.; Poch, M.; Alonso, J.; Valle, M. del; Lima, J.L.F.C.

    1991-01-01

    Results obtained in the evaluation of a mathematical model for flow-injection sandwich systems, in which the sample is inserted between two different carrier solutions with the aid of an eight-way injection valve, are presented. The model considers the system as a tubular reactor with axially dispersed plug flow, where chemical kinetics have been included. Only a minimum of parameters are needed for the model: the dispersion coefficients, which are obtained from experimental correlations for the different hydrodynamic conditions, and the rate constants, which are determined by univariate optimization. The behaviour of the model, when applied to the case of one analyte and one reagent, was evaluated for the enzymatic determinations of glucose and glycerol. The case of two analytes determined with two reagents was also studied in the combined determination of glucose and glycerol. Experimental profiles were compared with the simulated peaks and showed good agreement. (author). 20 refs.; 11 figs.; 2 tabs

  17. Mathematical modelling of two-analyte sequential determinations by flow-injection sandwich-techniques

    Energy Technology Data Exchange (ETDEWEB)

    Montesinos, J.L.; Poch, M. (Universitat Autonoma de Barcelona (Spain). Departament de Quimica, Unitat d' Enginyera Quimica); Alonso, J.; Valle, M. del (Universitat Autonoma de Barcelona (Spain). Departament de Quimica, Unitat de Quimica Analitica); Lima, J.L.F.C. (Universidade de Porto (Portugal). Faculdade de Farmacia, Departamento de Quimica Fisica)

    1991-11-20

    Results obtained in the evaluation of a mathematical model for flow-injection sandwich systems, in which the sample is inserted between two different carrier solutions with the aid of an eight-way injection valve, are presented. The model considers the system as a tubular reactor with axially dispersed plug flow, where chemical kinetics have been included. Only a minimum of parameters are needed for the model: the dispersion coefficients, which are obtained from experimental correlations for the different hydrodynamic conditions, and the rate constants, which are determined by univariate optimization. The behaviour of the model, when applied to the case of one analyte and one reagent, was evaluated for the enzymatic determinations of glucose and glycerol. The case of two analytes determined with two reagents was also studied in the combined determination of glucose and glycerol. Experimental profiles were compared with the simulated peaks and showed good agreement. (author). 20 refs.; 11 figs.; 2 tabs.

  18. Laboratory Techniques in Geology: Embedding Analytical Methods into the Undergraduate Curriculum

    Science.gov (United States)

    Baedke, S. J.; Johnson, E. A.; Kearns, L. E.; Mazza, S. E.; Gazel, E.

    2014-12-01

    Paid summer REU experiences successfully engage undergraduate students in research and encourage them to continue to graduate school and scientific careers. However these programs only accommodate a limited number of students due to funding constraints, faculty time commitments, and limited access to needed instrumentation. At JMU, the Department of Geology and Environmental Science has embedded undergraduate research into the curriculum. Each student fulfilling a BS in Geology or a BA in Earth Science completes 3 credits of research, including a 1-credit course on scientific communication, 2 credits of research or internship, followed by a presentation of that research. Our department has successfully acquired many analytical instruments and now has an XRD, SEM/EDS, FTIR, handheld Raman, AA, ion chromatograph, and an IRMS. To give as many students as possible an overview to the scientific uses and operation methods for these instruments, we revived a laboratory methods course that includes theory and practical use of instrumentation at JMU, plus XRF sample preparation and analysis training at Virginia Tech during a 1-day field trip. In addition to practical training, projects included analytical concepts such as evaluating analytical vs. natural uncertainty, determining error on multiple measurements, signal-to-noise ratio, and evaluating data quality. State funding through the 4-VA program helped pay for analytical supplies and support for students to complete research projects over the summer or during the next academic year using instrumentation from the course. This course exemplifies an alternative path to broadening participation in undergraduate research and creating stronger partnerships between PUI's and research universities.

  19. Analytical techniques for characterization of raw materials in cell culture media

    OpenAIRE

    Sharma, Chandana; Drew, Barry; Head, Kevin; Pusuluri, Rani; Caple, Matthew V

    2011-01-01

    Abstract Raw materials are a critical part of any cell culture medium; therefore, it is of utmost importance to understand and characterize them for high-quality product. The raw material characterization (RMC) program at SAFC focuses on individual screening of raw materials both analytically and biologically. The goal of the program is to develop the best-in-class knowledge base of the raw materials used in SAFC’s media formulations and their impact on performance of products.

  20. Short-Term Forecasting Models for Photovoltaic Plants: Analytical versus Soft-Computing Techniques

    OpenAIRE

    Monteiro, Claudio; Fernandez-Jimenez, L. Alfredo; Ramirez-Rosado, Ignacio J.; Muñoz-Jimenez, Andres; Lara-Santillan, Pedro M.

    2013-01-01

    We present and compare two short-term statistical forecasting models for hourly average electric power production forecasts of photovoltaic (PV) plants: the analytical PV power forecasting model (APVF) and the multiplayer perceptron PV forecasting model (MPVF). Both models use forecasts from numerical weather prediction (NWP) tools at the location of the PV plant as well as the past recorded values of PV hourly electric power production. The APVF model consists of an original modeling for adj...

  1. The role of nuclear analytical techniques in the study of aqueous corrosion of glasses

    International Nuclear Information System (INIS)

    Trocellier, P.

    1984-01-01

    Direct observation of resonant nuclear reactions, backscattering spectrometry and X ray microanalysis with a nuclear microprobe were used to determine elementary depth profiles in the near surface region of leached glasses. Some computing programs required to interpretate the analytical information detected were built. Experimental conditions to characterize glass samples without secondary effects were defined; and the influence of some leaching parameters was studied to describe the first stages of aqueous corrosion of borosilicate glasses [fr

  2. General technique for analytical derivatives of post-projected Hartree-Fock.

    Science.gov (United States)

    Tsuchimochi, Takashi; Ten-No, Seiichiro

    2017-02-21

    In electronic structure theory, the availability of an analytical derivative is one of the desired features for a method to be useful in practical applications, as it allows for geometry optimization as well as computation of molecular properties. With the recent advances in the development of symmetry-projected Hartree-Fock (PHF) methods, we here aim at further extensions by devising the analytic gradients of post-PHF approaches with a special focus on spin-extended (spin-projected) configuration interaction with single and double substitutions (ECISD). Just like standard single-reference methods, the mean-field PHF part does not require the corresponding coupled-perturbed equation to be solved, while the correlation energy term needs the orbital relaxation effect to be accounted for, unless the underlying molecular orbitals are variationally optimized in the presence of the correlation energy. We present a general strategy for post-PHF analytical gradients, which closely parallels that for single-reference methods, yet addressing the major difference between them. The similarity between ECISD and multi-reference CI not only in the energy but also in the optimized geometry is clearly demonstrated by the numerical examples of ozone and cyclobutadiene.

  3. Determination and identification of synthetic cannabinoids and their metabolites in different matrices by modern analytical techniques – a review

    International Nuclear Information System (INIS)

    Znaleziona, Joanna; Ginterová, Pavlína; Petr, Jan; Ondra, Peter; Válka, Ivo; Ševčík, Juraj; Chrastina, Jan; Maier, Vítězslav

    2015-01-01

    Highlights: • Synthetic cannabinoids from analytical point of view. • Determination and identification methods of synthetic cannabinoids in different matrices. • Analytical techniques used from thin layer chromatography to high resolution mass spectrometry. • Detailed survey of gas and liquid chromatography methods for synthetic cannabinoids analysis. - Abstract: Synthetic cannabinoids have gained popularity due to their easy accessibility and psychoactive effects. Furthermore, they cannot be detected in urine by routine drug monitoring. The wide range of active ingredients in analyzed matrices hinders the development of a standard analytical method for their determination. Moreover, their possible side effects are not well known which increases the danger. This review is focused on the sample preparation and the determination of synthetic cannabinoids in different matrices (serum, urine, herbal blends, oral fluid, hair) published since 2004. The review includes separation and identification techniques, such as thin layer chromatography, gas and liquid chromatography and capillary electrophoresis, mostly coupled with mass spectrometry. The review also includes results by spectral methods like infrared spectroscopy, nuclear magnetic resonance or direct-injection mass spectrometry

  4. Determination and identification of synthetic cannabinoids and their metabolites in different matrices by modern analytical techniques – a review

    Energy Technology Data Exchange (ETDEWEB)

    Znaleziona, Joanna; Ginterová, Pavlína; Petr, Jan [Regional Centre of Advanced Technologies and Materials, Department of Analytical Chemistry, Faculty of Science, Palacký University, 17. Listopadu 12, Olomouc CZ-77146 (Czech Republic); Ondra, Peter; Válka, Ivo [Department of Forensic Medicine and Medical Law Faculty Hospital, Hněvotínská 3, Olomouc CZ-77146 (Czech Republic); Ševčík, Juraj [Regional Centre of Advanced Technologies and Materials, Department of Analytical Chemistry, Faculty of Science, Palacký University, 17. Listopadu 12, Olomouc CZ-77146 (Czech Republic); Chrastina, Jan [Institute of Special Education Studies, Faculty of Education, Palacký University, Žižkovo náměsti 5, Olomouc CZ-77146 (Czech Republic); Maier, Vítězslav, E-mail: vitezslav.maier@upol.cz [Regional Centre of Advanced Technologies and Materials, Department of Analytical Chemistry, Faculty of Science, Palacký University, 17. Listopadu 12, Olomouc CZ-77146 (Czech Republic)

    2015-05-18

    Highlights: • Synthetic cannabinoids from analytical point of view. • Determination and identification methods of synthetic cannabinoids in different matrices. • Analytical techniques used from thin layer chromatography to high resolution mass spectrometry. • Detailed survey of gas and liquid chromatography methods for synthetic cannabinoids analysis. - Abstract: Synthetic cannabinoids have gained popularity due to their easy accessibility and psychoactive effects. Furthermore, they cannot be detected in urine by routine drug monitoring. The wide range of active ingredients in analyzed matrices hinders the development of a standard analytical method for their determination. Moreover, their possible side effects are not well known which increases the danger. This review is focused on the sample preparation and the determination of synthetic cannabinoids in different matrices (serum, urine, herbal blends, oral fluid, hair) published since 2004. The review includes separation and identification techniques, such as thin layer chromatography, gas and liquid chromatography and capillary electrophoresis, mostly coupled with mass spectrometry. The review also includes results by spectral methods like infrared spectroscopy, nuclear magnetic resonance or direct-injection mass spectrometry.

  5. Earth Science Data Analytics: Bridging Tools and Techniques with the Co-Analysis of Large, Heterogeneous Datasets

    Science.gov (United States)

    Kempler, Steve; Mathews, Tiffany

    2016-01-01

    The continuum of ever-evolving data management systems affords great opportunities to the enhancement of knowledge and facilitation of science research. To take advantage of these opportunities, it is essential to understand and develop methods that enable data relationships to be examined and the information to be manipulated. This presentation describes the efforts of the Earth Science Information Partners (ESIP) Federation Earth Science Data Analytics (ESDA) Cluster to understand, define, and facilitate the implementation of ESDA to advance science research. As a result of the void of Earth science data analytics publication material, the cluster has defined ESDA along with 10 goals to set the framework for a common understanding of tools and techniques that are available and still needed to support ESDA.

  6. Analytical techniques for in-line/on-line monitoring of uranium and plutonium in process solutions : a brief literature survey

    International Nuclear Information System (INIS)

    Marathe, S.G.; Sood, D.D.

    1991-01-01

    In-line/on-line monitoring of various parameters such as uranium-plutonium-fission product concentration, acidity, density etc. plays an important role in quickly understanding the efficiency of processes in a reprocessing plant. Efforts in studying and installation of such analytical instruments are going on since more than three decades with adaptation of newer methods and technologies. A review on the developement of in-line analytical instrumentation was carried out in this laboratory about two decades ago. This report presents a very short literature survey of the work in the last two decades. The report includes an outline of principles of the main techniques employed in the in-line/on-line monitoring. (author). 77 refs., 6 tabs

  7. Meeting report on third regional workshop on quality assurance and quality control of nuclear analytical techniques

    International Nuclear Information System (INIS)

    2002-01-01

    Over the last 20 years, the Agency, through its Technical Co-operation Programme, has helped to establish many nuclear analytical laboratories in nuclear institutions and universities of Member States. The project RER/2/004 has been approved in 1999 for a period of two years aiming at the implementation of a comprehensive QA/QC protocol in laboratories of Member States following the ISO guide 17025. The project involved 13 laboratories from 12 countries. This report presents the project setup, intended outputs and outcomes, achievements and conclusions. It also contains reports from participating laboratories. Each of the reports has been provided with an abstract and indexed separately

  8. Regional technical cooperation model project, IAEA - RER/2/2004 ''quality control and quality assurance for nuclear analytical techniques'

    International Nuclear Information System (INIS)

    Arikan, P.

    2002-01-01

    An analytical laboratory should produce high quality analytical data through the use of analytical measurements that is accurate, reliable and adequate for the intended purpose. This objective can be accomplished in a cost-effective manner under a planned and documented quality system of activities. It is well-known that serious deficiencies can occur in laboratory operations when insufficient attention is given to the quality of the work. It requires not only a thorough knowledge of the laboratory's purpose and operation, but also the dedication of the management and operating staff to standards of excellence. Laboratories employing nuclear and nuclear-related analytical techniques are sometimes confronted with performance problems which prevent them from becoming accepted and respected by clients, such as industry, government and regulatory bodies, and from being eligible for contracts. The International Standard ISO 17025 has been produced as the result of extensive experience in the implementation of ISO/IEC Guide 25:1990 and EN 45001:1989, which replaces both of them now. It contains all of the requirements that testing and calibration laboratories must meet if they wish to demonstrate that they operate a quality system that is technically competent, and are able to generate technically valid results. The use of ISO 17025 should facilitate cooperation between laboratories and other bodies to assist in the exchange of information and experience, and in the harmonization of standards and procedures. IAEA model project RER/2/004 entitled 'Quality Assurance/Quality Control in Nuclear Analytical Techniques' was initiated in 1999 as a Regional TC project in East European countries to assist Member State laboratories in the region to install a complete quality system according to the ISO/IEC 17025 standard. 12 laboratories from 11 countries plus the Agency's Laboratories in Seibersdorf have been selected as participants to undergo exercises and training with the

  9. Metabolomic analysis using porcine skin: a pilot study of analytical techniques

    OpenAIRE

    Wu, Julie; Fiehn, Oliver; Armstrong, April W

    2014-01-01

    Background: Metabolic byproducts serve as indicators of the chemical processes and can provide valuable information on pathogenesis by measuring the amplified output. Standardized techniques for metabolome extraction of skin samples serve as a critical foundation to this field but have not been developed. Objectives: We sought to determine the optimal cell lysage techniques for skin sample preparation and to compare GC-TOF-MS and UHPLC-QTOF-MS for metabolomic analysis. ...

  10. Evaluation and standardisation of fast analytical techniques for destructive radwaste control

    International Nuclear Information System (INIS)

    De Simone, A.; Troiani, F.

    2001-01-01

    The document describes the work programme carried out by the Laboratorio Nazionale per la 'Caratterizzazione dei Refit Radioattivi', in the frame of the European research project Destructive Radwaste Control. The main tasks of the research work were the evaluation of fast sample pre-treatment procedures and the development of chromatographic methods coupled to fast nuclide detection by Liquid Scintillation Counting. In order to test the High Performance Ion Chromatograph (HPIC) coupled to the Liquid Scintillation Counter (LSC) on high salt content solutions, synthetic cement solutions have been prepared and spiked with several β-emitters hard to be measured with non-destructive analyses, along with other radionuclides important for the determination of the radiological inventory in radwastes. As the validation tests for the new analytical methods involved the manipulation of radioactive solutions, a remote area for HPIC-LSC apparatus has been designed and performed, in order to operate in safe conditions. According to the research programme, fast analytical methods for the chemical separation and radionuclide detection of the radioactive elements of interest, have been developed and qualified. From the results of the work, some protocols of analysis have been defined: they contain all information about operative conditions for HPIC-LSC apparatus, field of applicability, chemical and radioactive detection limits [it

  11. Channelling enhanced microanalysis: A high resolution analytical technique for atomic site and species determination

    Energy Technology Data Exchange (ETDEWEB)

    Krishnan, K.N.

    1987-11-01

    The formulation, development and applications of novel crystallographic technique to determine sepcific-site occupations of elemental additions in crystalline materials, using the channeling or Borrman effect in electron diffraction, is reviewed. This technique is based on the effect of incident beam orientations on the intensities of either the characteristic x-ray emissions or the characteristic electron energy-loss edges. The formulation of the technique under both planer and axial channeling conditions for crystalline materials is presented. In general, this technique can distinguish neighbors in the periodic table; involves no adjustable parameters, external standards or special specimen preparations; is applicable to trace elemental concentrations (0.2-0.3 wt % or 10/sup 25/ atoms/m/sup 3/); is very accurate and can be applied routinely at high spatial resolutions (approx.10-40nm). In the EELS formulation the technique can also provide specific site valence information. Finally, applications of this technique to site-occupation studies in a variety of materials is outlined. 35 refs., 6 figs., 1 tab.

  12. Applied research on air pollution using nuclear-related analytical techniques. Report on the second research co-ordination meeting

    International Nuclear Information System (INIS)

    1995-01-01

    A co-ordinated research programme (CRP) on applied research on air pollution using nuclear-related techniques is a global CRP which started in 1992, and is scheduled to run until early 1997. The purpose of this CRP is to promote the use of nuclear analytical techniques in air pollution studies, e.g. NAA, XRF, and PIXE for the analysis of toxic and other trace elements in air particulate matter. The main purposes of the core programme are i) to support the use of nuclear and nuclear-related analytical techniques for research and monitoring studies on air pollution, ii) to identify major sources of air pollution affecting each of the participating countries with particular reference to toxic heavy metals, and iii) to obtain comparative data on pollution levels in areas of high pollution (e.g. a city centre or a populated area downwind of a large pollution source) and low pollution (e.g. rural area). This document reports the discussions held during the second Research Co-ordination Meeting (RCM) for the CRP which took place at ANSTO in Menai, Australia. (author)

  13. Reliable screening of various foodstuffs with respect to their irradiation status: A comparative study of different analytical techniques

    International Nuclear Information System (INIS)

    Ahn, Jae-Jun; Akram, Kashif; Kwak, Ji-Young; Jeong, Mi-Seon; Kwon, Joong-Ho

    2013-01-01

    Cost-effective and time-efficient analytical techniques are required to screen large food lots in accordance to their irradiation status. Gamma-irradiated (0–10 kGy) cinnamon, red pepper, black pepper, and fresh paprika were investigated using photostimulated luminescence (PSL), direct epifluorescent filter technique/the aerobic plate count (DEFT/APC), and electronic-nose (e-nose) analyses. The screening results were also confirmed with thermoluminescence analysis. PSL analysis discriminated between irradiated (positive, >5000 PCs) and non-irradiated (negative, <700 PCs) cinnamon and red peppers. Black pepper had intermediate results (700–5000 PCs), while paprika had low sensitivity (negative results) upon irradiation. The DEFT/APC technique also showed clear screening results through the changes in microbial profiles, where the best results were found in paprika, followed by red pepper and cinnamon. E-nose analysis showed a dose-dependent discrimination in volatile profiles upon irradiation through principal component analysis. These methods can be used considering their potential applications for the screening analysis of irradiated foods. - Highlights: • Detection of irradiated food is important to enforce the applied regulations. • Gamma-irradiated spices were investigated to confirm their irradiation status. • Screening techniques such as PSL, DEFT/APC, and E-nose were tested. • Specificity and potential applications of screening techniques were evaluated. • The screening results were confirmed by promising thermoluminescence technique

  14. Applications of nuclear analytical techniques in human nutrition research as exemplified by research programmes of the International Atomic Energy Agency

    International Nuclear Information System (INIS)

    Parr, R.M.

    1987-01-01

    In human nutrition research, nuclear analytical techniques, particularly neutron activation analysis (NAA), are used mainly for the in vitro study of trace elements. According to work sponsored by the IAEA, up to 15 trace elements and 5 minor elements of nutritional interest may be determined in biological materials by NAA with good accuracy and precision. A programme is described in which NAA was used for the determination of 14 trace elements and one minor element in human milk. NAA also plays an important role in the certification of reference materials for nutritional studies. (author) 17 refs.; 6 tables

  15. Integrated analytical techniques with high sensitivity for studying brain translocation and potential impairment induced by intranasally instilled copper nanoparticles.

    Science.gov (United States)

    Bai, Ru; Zhang, Lili; Liu, Ying; Li, Bai; Wang, Liming; Wang, Peng; Autrup, Herman; Beer, Christiane; Chen, Chunying

    2014-04-07

    Health impacts of inhalation exposure to engineered nanomaterials have attracted increasing attention. In this paper, integrated analytical techniques with high sensitivity were used to study the brain translocation and potential impairment induced by intranasally instilled copper nanoparticles (CuNPs). Mice were exposed to CuNPs in three doses (1, 10, 40 mg/kg bw). The body weight of mice decreased significantly in the 10 and 40 mg/kg group (ptechniques for systematic investigations is a promising direction to better understand the biological activities of nanomaterials. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  16. Atomic and Nuclear Analytical Methods XRF, Mössbauer, XPS, NAA and Ion-Beam Spectroscopic Techniques

    CERN Document Server

    Verma, H R

    2007-01-01

    This book is a blend of analytical methods based on the phenomenon of atomic and nuclear physics. It comprises comprehensive presentations about X-ray Fluorescence (XRF), Mössbauer Spectroscopy (MS), X-ray Photoelectron Spectroscopy (XPS), Neutron- Activation Analysis (NAA), Particle Induced X-ray Emission Analysis (PIXE), Rutherford Backscattering Analysis (RBS), Elastic Recoil Detection (ERD), Nuclear Reaction Analysis (NRA), Particle Induced Gamma-ray Emission Analysis (PIGE), and Accelerator Mass Spectrometry (AMS). These techniques are commonly applied in the fields of medicine, biology, environmental studies, archaeology or geology et al. and pursued in major international research laboratories.

  17. Multielement determination in Cuban red mangrove samples using nuclear and related analytical techniques

    International Nuclear Information System (INIS)

    Estevez Alvarez, J.R.; Aguiar Lambert, D.; Montero Alvarez, A.; Pupo Gonzalez, I.; Padilla Alvarez, R.; Gonzalez Garcia, H.; Ramirez Sasco, M.

    1998-01-01

    In the present work the contents of Al; K; Ca; Mn; Fe; Ni; Cu; Zn; Sr; Cd and Pb in red mangroves (Rhizophora mangle) from different Cuban regions are determined, using Energy Dispersive X-Ray Fluorescence (Emission-Transmission (Et) and I/C methods), Atomic Absorption Spectrophotometry (AAS), and Polarography (Anodic Stripping Voltametry method). Biological Certified Reference Materials (CRM) are employed for the tracing of the tracing of the curves of the relative I/C method and for the evaluation of the analytical results accuracy. The reliability of the results is also checked by statistical means. Standard deviations and the detection limits of each method are reported. Finally, the obtained values for the concentration of the different elements in each studied ecosystem are presented; a detailed discussion about their significance will be performed in a further paper

  18. Analytical-scale separations of lanthanides : a review of techniques and fundamentals.

    Energy Technology Data Exchange (ETDEWEB)

    Nash, K. L.; Jensen, M. P.

    1999-10-27

    Separations chemistry is at the heart of most analytical procedures to determine the rare earth content of both man-made and naturally occurring materials. Such procedures are widely used in mineral exploration, fundamental geology and geochemistry, material science, and in the nuclear industry. Chromatographic methods that rely on aqueous solutions containing complexing agents sensitive to the lanthanide cationic radius and cation-exchange phase transfer reactions (using a variety of different solid media) have enjoyed the greatest success for these procedures. In this report, they will briefly summarize the most important methods for completing such analyses. they consider in some detail the basic aqueous (and two-phase) solution chemistry that accounts for separations that work well and offer explanations for why others are less successful.

  19. Modern analytical techniques in the assessment of the authenticity of Serbian honey.

    Science.gov (United States)

    Milojković Opsenica, Dušanka; Lušić, Dražen; Tešić, Živoslav

    2015-12-01

    Food authenticity in a broader sense means fulfilling chemical and physical criteria prescribed by the proposed legislation. In the case of honey authenticity, two aspects are of major concern: the manufacturing process and the labelling of final products in terms of their geographical and botanical origin. A reliable assessment of honey authenticity has been a longterm preoccupation of chemists-analysts and it usually involves the use of several criteria and chemical markers, as well as a combination of analytical and statistical (chemometric) methods. This paper provides an overview of different criteria and modern methods for the assessment of honey authenticity in the case of a statistically significant number of authentic honey samples of several botanical types from various regions of Serbia.

  20. New digital demodulator with matched filters and curve segmentation techniques for BFSK demodulation: Analytical description

    Directory of Open Access Journals (Sweden)

    Jorge Torres Gómez

    2015-09-01

    Full Text Available The present article relates in general to digital demodulation of Binary Frequency Shift Keying (BFSK. The objective of the present research is to obtain a new processing method for demodulating BFSK-signals in order to reduce hardware complexity in comparison with other methods reported. The solution proposed here makes use of the matched filter theory and curve segmentation algorithms. This paper describes the integration and configuration of a Sampler Correlator and curve segmentation blocks in order to obtain a digital receiver for a proper demodulation of the received signal. The proposed solution is shown to strongly reduce hardware complexity. In this part a presentation of the proposed solution regarding the analytical expressions is addressed. The paper covers in detail the elements needed for properly configuring the system. In a second part it is presented the implementation of the system for FPGA technology and the simulation results in order to validate the overall performance.

  1. Analytical-scale separations of lanthanides : a review of techniques and fundamentals

    International Nuclear Information System (INIS)

    Nash, K. L.; Jensen, M. P.

    1999-01-01

    Separations chemistry is at the heart of most analytical procedures to determine the rare earth content of both man-made and naturally occurring materials. Such procedures are widely used in mineral exploration, fundamental geology and geochemistry, material science, and in the nuclear industry. Chromatographic methods that rely on aqueous solutions containing complexing agents sensitive to the lanthanide cationic radius and cation-exchange phase transfer reactions (using a variety of different solid media) have enjoyed the greatest success for these procedures. In this report, they will briefly summarize the most important methods for completing such analyses. they consider in some detail the basic aqueous (and two-phase) solution chemistry that accounts for separations that work well and offer explanations for why others are less successful

  2. Kinetic calculations for miniature neutron source reactor using analytical and numerical techniques

    International Nuclear Information System (INIS)

    Ampomah-Amoako, E.

    2008-06-01

    The analytical methods, step change in reactivity and ramp change in reactivity as well as numerical methods, fixed point iteration and Runge Kutta-gill were used to simulate the initial build up of neutrons in a miniature neutron source reactor with and without temperature feedback effect. The methods were modified to include photo neutron concentration. PARET 7.3 was used to simulate the transients behaviour of Ghana Research Reactor-1. The PARET code was capable of simulating the transients for 2.1 mk and 4 mk insertions of reactivity with peak powers of 49.87 kW and 92.34 kW, respectively. PARET code however failed to simulate 6.71 mk of reactivity which was predicted by Akaho et al through TEMPFED. (au)

  3. A review of analytical techniques to determine long-lived radiobiologically significant nuclides in encapsulated waste

    International Nuclear Information System (INIS)

    Amey, M.H.D.; Kenward, D.; Symons, W.J.

    1985-05-01

    Methods have been identified, or are proposed for, most of the radionuclides considered important for long term storage. From the information obtained the development of liquid chromatography together with an in-line radiochemical detector is proposed as a powerful technique for sequential separation and analysis of multi-component systems. (UK)

  4. Utilization of analytical techniques in aid the implantation of nuclear installations

    International Nuclear Information System (INIS)

    Ferreira, M.P.; Sabino, C.V.S.; Avelar, M.M.

    1984-01-01

    Nuclear, physico-chemical and classic techniques developed and utilized by Centro de Desenvolvimento de Tecnicas Nucleares are presented, as back up to the implementation and operation of nuclear installations related with several parts of fuel cycle from uranium prospecting to waste treatment samples of soils, ores, alloys, plastics, paints, biological materials, air and water were analysed. (M.C.K) [pt

  5. Characterization of thin films and surfaces by ion-beam analytical techniques

    International Nuclear Information System (INIS)

    Pelicon, P.; Budnar, M.; Zorko, B.; Razpet, A.

    1999-01-01

    The optimization of Rutherford Backscattering Spectroscopy (RBS) and Elastic Recoil Detection Analysis (ERDA) at the tandetron facility of J. Stefan Inst.e is reported. The most recent applications of these techniques for the analysis of thin films and surfaces are presented. The construction of the isotope - resolved Time-Of-Flight ERDA telescope for depth profiling of light elements is reviewed.(author)

  6. Comparative analysis of toxic elements in snuff by analytical techniques of X-ray fluorescence

    International Nuclear Information System (INIS)

    Mendoza, Mario; Olivera, Paula

    2013-01-01

    Six samples of different commercial brands of cigarettes expended in the Peruvian market have been analyzed along with two IAEA certified reference material using the technique of X-ray fluorescence energy dispersive. The results obtained in the study showed the presence of toxic metals such as Cr, Mn, Fe, Cu and Zn.

  7. Analytical method for the identification and assay of 12 phthalates in cosmetic products: application of the ISO 12787 international standard "Cosmetics-Analytical methods-Validation criteria for analytical results using chromatographic techniques".

    Science.gov (United States)

    Gimeno, Pascal; Maggio, Annie-Françoise; Bousquet, Claudine; Quoirez, Audrey; Civade, Corinne; Bonnet, Pierre-Antoine

    2012-08-31

    Esters of phthalic acid, more commonly named phthalates, may be present in cosmetic products as ingredients or contaminants. Their presence as contaminant can be due to the manufacturing process, to raw materials used or to the migration of phthalates from packaging when plastic (polyvinyl chloride--PVC) is used. 8 phthalates (DBP, DEHP, BBP, DMEP, DnPP, DiPP, DPP, and DiBP), classified H360 or H361, are forbidden in cosmetics according to the European regulation on cosmetics 1223/2009. A GC/MS method was developed for the assay of 12 phthalates in cosmetics, including the 8 phthalates regulated. Analyses are carried out on a GC/MS system with electron impact ionization mode (EI). The separation of phthalates is obtained on a cross-linked 5%-phenyl/95%-dimethylpolysiloxane capillary column 30 m × 0.25 mm (i.d.) × 0.25 mm film thickness using a temperature gradient. Phthalate quantification is performed by external calibration using an internal standard. Validation elements obtained on standard solutions, highlight a satisfactory system conformity (resolution>1.5), a common quantification limit at 0.25 ng injected, an acceptable linearity between 0.5 μg mL⁻¹ and 5.0 μg mL⁻¹ as well as a precision and an accuracy in agreement with in-house specifications. Cosmetic samples ready for analytical injection are analyzed after a dilution in ethanol whereas more complex cosmetic matrices, like milks and creams, are assayed after a liquid/liquid extraction using ter-butyl methyl ether (TBME). Depending on the type of cosmetics analyzed, the common limits of quantification for the 12 phthalates were set at 0.5 or 2.5 μg g⁻¹. All samples were assayed using the analytical approach described in the ISO 12787 international standard "Cosmetics-Analytical methods-Validation criteria for analytical results using chromatographic techniques". This analytical protocol is particularly adapted when it is not possible to make reconstituted sample matrices. Copyright © 2012

  8. An uncovered XIII century icon: Particular use of organic pigments and gilding techniques highlighted by analytical methods

    Science.gov (United States)

    Daveri, Alessia; Doherty, Brenda; Moretti, Patrizia; Grazia, Chiara; Romani, Aldo; Fiorin, Enrico; Brunetti, Brunetto Giovanni; Vagnini, Manuela

    2015-01-01

    The restoration of a panel painting depicting a Madonna and Child listed as an unknown Tuscan artist of the nineteenth century, permitted the hidden original version, a XIII century Medieval icon to be uncovered. It is discovery provided the opportunity for an extensive in situ campaign of non-invasive analytical investigations by portable imaging and spectroscopic techniques (infrared, X-ray fluorescence and diffraction, UV-Vis absorption and emission), followed by aimed micro-destructive investigations (Raman and SEM-EDS). This approach permitted characterization of the original ground and paint layers by complementary techniques. Furthermore, this protocol allowed supplementary particularities of great interest to be highlighted. Namely, numerous original gilding techniques have been accentuated in diverse areas and include the use of surrogate gold (disulphur tin), orpiment as a further false gold and an area with an original silver rich layer. Moreover, pigments including azurite mixed with indigo have been non-invasively identified. Micro-invasive analyses also allowed the diagnosis of organic colorants, namely, an animal anthraquinone lake, kermes and an unusual vegetal chalcone pigment, possibly safflower. The identification of the latter is extremely rare as a painting pigment and has been identified using an innovative adaption to surface enhanced Raman techniques on a cross-section. The resulting data contributes new hypotheses to the historic and artistic knowledge of materials and techniques utilized in XIII century icon paintings and ultimately provides scientific technical support of the recent restoration.

  9. Side-by-side comparison of analytical techniques; organic acids, total organic carbon, and anions in PWR secondary cycles

    International Nuclear Information System (INIS)

    Hobart, S.A.; Byers, W.A.; Miller, M.R.; Richards, J.; Silva, H.; Palino, G.F.; Wall, P.S.

    1986-01-01

    Total Organic Carbon TOC samples should be analyzed no later than one week after they are taken and they should be stored in a refrigerated condition, if at all possible. It can be inferred that for TOC levels in the range of 50 to 120 ppb, state-of-the-art sampling and analysis techniques can produce results varying by 20 to 50 ppb. Any proposed limits for TOC should be reviewed in that light. Agreement between anion results appeared to improve over the course of the project. Both contractors agree that increased attention and care with sampling and analytical techniques probably accounted for this improvement. Utility personnel can therefore conclude that proper employee training, supervision, and motivation for proper sampling and analysis are critical if accurate anion results are to be obtained. Resonable agreement between calculated and measured values of cation conductivity suggest that both contractors had accurately determined all major anionic species

  10. Analytical study of nonlinear phase shift through stimulated Brillouin scattering in single mode fiber with the pump power recycling technique

    International Nuclear Information System (INIS)

    Al-Asadi, H A; Mahdi, M A; Bakar, A A A; Adikan, F R Mahamd

    2011-01-01

    We present a theoretical study of nonlinear phase shift through stimulated Brillouin scattering in single mode optical fiber. Analytical expressions describing the nonlinear phase shift for the pump and Stokes waves in the pump power recycling technique have been derived. The dependence of the nonlinear phase shift on the optical fiber length, the reflectivity of the optical mirror and the frequency detuning coefficient have been analyzed for different input pump power values. We found that with the recycling pump technique, the nonlinear phase shift due to stimulated Brillouin scattering reduced to less than 0.1 rad for 5 km optical fiber length and 0.65 reflectivity of the optical mirror, respectively, at an input pump power equal to 30 mW

  11. Microextraction techniques at the analytical laboratory: an efficient way for determining low amounts of residual insecticides in soils

    Science.gov (United States)

    Viñas, Pilar; Navarro, Tania; Campillo, Natalia; Fenoll, Jose; Garrido, Isabel; Cava, Juana; Hernandez-Cordoba, Manuel

    2017-04-01

    Microextraction techniques allow sensitive measurements of pollutants to be carried out by means of instrumentation commonly available at the analytical laboratory. This communication reports our studies focused to the determination of pyrethroid insecticides in polluted soils. These chemicals are synthetic analogues of pyrethrum widely used for pest control in agricultural and household applications. Because of their properties, pyrethroids tend to strongly absorb to soil particles and organic matter. Although they are considered as pesticides with a low toxicity for humans, long times exposure to them may cause damage in immune system and in the neurological system. The procedure here studied is based on dispersive liquid-liquid microextraction (DLLME), and permits the determination of fifteen pyrethroid compounds (allethrin, resmethrin, tetramethrin, bifenthrin, fenpropathrin, cyhalothrin, acrinathrin, permethrin, λ-cyfluthrin, cypermethrin, flucythrinate, fenvalerate, esfenvalerate, τ-fluvalinate, and deltamethrin) in soil samples using gas chromatography with mass spectrometry (GC-MS). The analytes were first extracted from the soil samples (4 g) by treatment with 2 mL of acetonitrile, 2 mL of water and 0.5 g of NaCl. The enriched organic phase (approximately 0.8 mL) was separated by centrifugation, and this solution used as the dispersant in a DLLME process. The analytes did not need to be derivatized before their injection into the chromatographic system, due to their volatility and thermal stability. The identification of the different pyrethroids was carried out based on their retention times and mass spectra, considering the m/z values of the different fragments and their relative abundances. The detection limits were in the 0.2-23 ng g-1 range, depending on the analyte and the sample under analysis. The authors are grateful to the Comunidad Autonóma de la Región de Murcia, Spain (Fundación Séneca, 19888/GERM/15) and to the Spanish MINECO (Project

  12. Evaluation and standardisation of fast analytical techniques for destructive radwaste control

    Energy Technology Data Exchange (ETDEWEB)

    De Simone, A.; Troiani, F. [ENEA, Unita' Rifiuti Radioattivi e Disattivazione Impianti, Centro Ricerche Saluggia, Vercelli (Italy)

    2001-07-01

    The document describes the work programme carried out by the Laboratorio Nazionale per la 'Caratterizzazione dei Rifiuti Radioattivi', in the frame of the European research project Destructive Radwaste Control. The main tasks of the research work were the evaluation of fast sample pre-treatment procedures and the development of chromatographic methods coupled to fast nuclide detection by Liquid Scintillation Counting. In order to test the High Performance Ion Chromatograph (HPIC) coupled to the Liquid Scintillation Counter (LSC) on high salt content solutions, synthetic cement solutions have been prepared and spiked with several {beta}-emitters hard to be measured with non-destructive analyses, along with other radionuclides important for the determination of the radiological inventory in radwastes. As the validation tests for the new analytical methods involved the manipulation of radioactive solutions, a remote area for HPIC-LSC apparatus has been designed and performed, in order to operate in safe conditions. According to the research programme, fast analytical methods for the chemical separation and radionuclide detection of the radioactive elements of interest, have been developed and qualified. From the results of the work, some protocols of analysis have been defined: they contain all information about operative conditions for HPIC-LSC apparatus, field of applicability, chemical and radioactive detection limits. [Italian] Questo documento riporta il lavoro realizzato dal Laboratorio Nazionale per la Caratterizzazione dei Rifiuti Radioattivi, nell'ambito del progetto di ricerca Europeo sulle tecniche di misura distruttive per rifiuti radioattivi. Il lavoro era finalizzato sia alla valutazione di nuove procedure veloci per la preparazione dei campioni da analizzare sia allo sviluppo di metodi Cromatografici accoppiati alla rivelazione di radionuclidi mediante Conteggio a Scintillazione Liquida. La sperimentazione della Cromatografia Ionica ad

  13. Shaded computer graphic techniques for visualizing and interpreting analytic fluid flow models

    Science.gov (United States)

    Parke, F. I.

    1981-01-01

    Mathematical models which predict the behavior of fluid flow in different experiments are simulated using digital computers. The simulations predict values of parameters of the fluid flow (pressure, temperature and velocity vector) at many points in the fluid. Visualization of the spatial variation in the value of these parameters is important to comprehend and check the data generated, to identify the regions of interest in the flow, and for effectively communicating information about the flow to others. The state of the art imaging techniques developed in the field of three dimensional shaded computer graphics is applied to visualization of fluid flow. Use of an imaging technique known as 'SCAN' for visualizing fluid flow, is studied and the results are presented.

  14. Boron isotope determinations in waters and other geological materials: analytical techniques and inter-calibration of measurements.

    Science.gov (United States)

    Tonarini, Sonia; Pennisi, Maddalena; Gonfiantini, Roberto

    2009-06-01

    The (11)B/(10)B ratio exhibits wide variations in nature; thus, boron isotopes have found numerous applications in geochemistry, hydrology, and environmental studies. The main analytical techniques used are as follows: positive thermal ionisation mass spectrometry is the most precise (about 0.2 per thousand of the boron isotope ratio), but requires complex and laborious sample preparation; negative thermal ionisation mass spectrometry is less precise (about 0.5 per thousand), but rapid and suitable for water samples, whereas total evaporation-NTIMS allows for identification of the precise boron isotope composition of marine carbonates. It is expected that multi-collection system inductively coupled plasma mass spectrometry (MC-ICPMS) will eventually combine high precision with simple analytical procedures. Secondary ion mass spectrometry and laser ablation (LA)-MC-ICPMS allow in situ determinations on solid samples, but require the availability of calibration materials which are chemically and mineralogically similar to samples. These features of boron isotope measurement techniques were confirmed by the results of the first inter-laboratory comparison of measurements, organised by the Istituto di Geoscienze e Georisorse in Pisa. Finally, two examples of boron isotope applications in groundwater investigations are reported.

  15. Analytical technique for label-free multi-protein detection based on Western blot and surface-enhanced Raman scattering.

    Science.gov (United States)

    Han, Xiao X; Jia, Hui Y; Wang, Yan F; Lu, Zhi C; Wang, Chun X; Xu, Wei Q; Zhao, Bing; Ozaki, Yukihiro

    2008-04-15

    We have developed a new analytical procedure for label-free protein detection designated "Western SERS", consisting of protein electrophoresis, Western blot, colloidal silver staining, and surface-enhanced Raman scattering (SERS) detection. A novel method of silver staining for Western blot that uses a silver colloid, an excellent SERS-active substrate, is first proposed in the present study. During the process of silver staining, interactions between proteins and silver nanoparticles result in the emergence of SERS of proteins. In the present study, we use myoglobin (Mb) and bovine serum albumin (BSA) as model proteins. From different protein bands on a nitrocellulose (NC) membrane, we have observed surface-enhanced resonance Raman scattering (SERRS) spectra of Mb and SERS spectra of BSA. The proposed technique offers dual advantages of simplicity and high sensitivity. On one hand, after the colloidal silver staining, we can detect label-free multi-proteins directly on a NC membrane without digestion, extraction, and other pretreatments. On the other hand, the detection limit of the Western SERS is almost consistent with the detection limit of colloidal silver staining, and the SERRS detection limit of Mb is found to be 4 ng/band. This analytical method, which combines the technique of protein separation with SERS, may be a powerful protocol for label-free protein detection in proteomic research.

  16. Predicting core losses and efficiency of SRM in continuous current mode of operation using improved analytical technique

    Energy Technology Data Exchange (ETDEWEB)

    Parsapour, Amir, E-mail: amirparsapour@gmail.com [Department of Electrical Engineering, University of Isfahan, Isfahan (Iran, Islamic Republic of); Dehkordi, Behzad Mirzaeian, E-mail: mirzaeian@eng.ui.ac.ir [Department of Electrical Engineering, University of Isfahan, Isfahan (Iran, Islamic Republic of); Moallem, Mehdi, E-mail: moallem@cc.iut.ac.ir [Department of Electrical Engineering, Isfahan University of Technology, Isfahan (Iran, Islamic Republic of)

    2015-03-15

    In applications in which the high torque per ampere at low speed and rated power at high speed are required, the continuous current method is the best solution. However, there is no report on calculating the core loss of SRM in continuous current mode of operation. Efficiency and iron loss calculation which are complex tasks in case of conventional mode of operation is even more involved in continuous current mode of operation. In this paper, the Switched Reluctance Motor (SRM) is modeled using finite element method and core loss and copper loss of SRM in discontinuous and continuous current modes of operation are calculated using improved analytical techniques to include the minor loop losses in continuous current mode of operation. Motor efficiency versus speed in both operation modes is obtained and compared. - Highlights: • Continuous current method for Switched Reluctance Motor (SRM) is explained. • An improved analytical technique is presented for SRM core loss calculation. • SRM losses in discontinuous and continuous current operation modes are presented. • Effect of mutual inductances on SRM performance is investigated.

  17. Trace element air pollution monitoring studies in Slovenia using nuclear analytical techniques

    International Nuclear Information System (INIS)

    Smodis, S.B.; Jacimovic, R.; Jeran, Z.; Miklavcic, V.; Stegnar, P.; Stropnik, B.

    1994-01-01

    In the past, only a few investigations have been performed in Slovenia concerning trace elements, toxic elements, heavy metals and radionuclides in the atmosphere. During recent years, several projects were initiated, involving health-related studies connected to air pollution in highly exposed areas, mapping the status of air pollution in the whole country using biomonitors, as well as some specific research, i.e. involving studies of mercury speciation in the atmosphere around a mercury mine or concentration levels of radionuclides in biomonitors around a uranium mine. Since all these projects were or are of a preliminary nature, in this report, the emphasis is mainly on the methodology and analytical development (neutron activation analysis and X-ray spectrometry), and to a lesser extent on the results obtained up to now. Efforts are being put into co-ordination of all the presently running projects in order to complement the results and to make a unified database for their later evaluation and statistical interpretation. (author). 22 refs, 1 fig., 1 tab

  18. Markov-CA model using analytical hierarchy process and multiregression technique

    Science.gov (United States)

    Omar, N. Q.; Sanusi, S. A. M.; Hussin, W. M. W.; Samat, N.; Mohammed, K. S.

    2014-06-01

    The unprecedented increase in population and rapid rate of urbanisation has led to extensive land use changes. Cellular automata (CA) are increasingly used to simulate a variety of urban dynamics. This paper introduces a new CA based on an integration model built-in multi regression and multi-criteria evaluation to improve the representation of CA transition rule. This multi-criteria evaluation is implemented by utilising data relating to the environmental and socioeconomic factors in the study area in order to produce suitability maps (SMs) using an analytical hierarchical process, which is a well-known method. Before being integrated to generate suitability maps for the periods from 1984 to 2010 based on the different decision makings, which have become conditioned for the next step of CA generation. The suitability maps are compared in order to find the best maps based on the values of the root equation (R2). This comparison can help the stakeholders make better decisions. Thus, the resultant suitability map derives a predefined transition rule for the last step for CA model. The approach used in this study highlights a mechanism for monitoring and evaluating land-use and land-cover changes in Kirkuk city, Iraq owing changes in the structures of governments, wars, and an economic blockade over the past decades. The present study asserts the high applicability and flexibility of Markov-CA model. The results have shown that the model and its interrelated concepts are performing rather well.

  19. Elementary mechanics using Python a modern course combining analytical and numerical techniques

    CERN Document Server

    Malthe-Sørenssen, Anders

    2015-01-01

    This book – specifically developed as a novel textbook on elementary classical mechanics – shows how analytical and numerical methods can be seamlessly integrated to solve physics problems. This approach allows students to solve more advanced and applied problems at an earlier stage and equips them to deal with real-world examples well beyond the typical special cases treated in standard textbooks. Another advantage of this approach is that students are brought closer to the way physics is actually discovered and applied, as they are introduced right from the start to a more exploratory way of understanding phenomena and of developing their physical concepts. While not a requirement, it is advantageous for the reader to have some prior knowledge of scientific programming with a scripting-type language. This edition of the book uses Python, and a chapter devoted to the basics of scientific programming with Python is included. A parallel edition using Matlab instead of Python is also available. Last but not...

  20. Elementary mechanics using Matlab a modern course combining analytical and numerical techniques

    CERN Document Server

    Malthe-Sørenssen, Anders

    2015-01-01

    This book – specifically developed as a novel textbook on elementary classical mechanics – shows how analytical and numerical methods can be seamlessly integrated to solve physics problems. This approach allows students to solve more advanced and applied problems at an earlier stage and equips them to deal with real-world examples well beyond the typical special cases treated in standard textbooks. Another advantage of this approach is that students are brought closer to the way physics is actually discovered and applied, as they are introduced right from the start to a more exploratory way of understanding phenomena and of developing their physical concepts. While not a requirement, it is advantageous for the reader to have some prior knowledge of scientific programming with a scripting-type language. This edition of the book uses Matlab, and a chapter devoted to the basics of scientific programming with Matlab is included. A parallel edition using Python instead of Matlab is also available. Last but not...

  1. Determination of trace elements in drinking tea by various analytical techniques

    International Nuclear Information System (INIS)

    Wang Chufang; Ke Chenghsiung; Yang Jenqyann

    1993-01-01

    Tea has been one of the most popular simulating beverages which is both heavily produced and consumed in Taiwan. The determination of minor or trace elements in drinking tea and tea leaves is therefore important for estimating the daily intake of Taiwanese considered as a safety indicator. In order to accurately and precisely determine the concentrations of trace elements in samples, several analytical methods such as AAS, NAA and ICP-AES are suggested. This paper attempts to utilize all three methods to determine the concentrations of minor or trace elements in different types of tea leaves and the extracts percolated from them. The influence of fermentation processes on the concentration levels of minor or trace elements in tea samples is investigated. Because only free metal ions are bioavailable for the human body, it is necessary to determine their concentrations in drinking tea. The dissolution of trace elements in drinking tea is therefore studied by simulating the common Chinese style of tea percolation. Concentrations of thirteen elements including Zn, Mn, Ca, Cu, Ni, Al, K, Mg, Cd, Pb, Na, Co and Sc are determined. (author) 14 refs.; 1 fig.; 6 tabs

  2. Applications of Nuclear Analytical Techniques to Investigate the Authenticity of Art Objects

    International Nuclear Information System (INIS)

    Olivera, P.; Lopez, A.; Bedregal, P.; Santiago, J.; Petrick, S.; Bravo, J.; Alcalde, J.; Isla, J.; Vetter, L.; Baca, E.

    2011-01-01

    127 Nasca pottery and 10 imitations were analyzed by TL, NAA, XRF, TEM, DRX and Mossbauer spectroscopy to obtain analytical differences that allow differentiating them quickly. Additionally 20 pieces of the Wari culture found in the city of Cahuachi were analyzed. The multielementary composition of Nasca ceramics obtained by AAN allows, thanks to the multivariate analysis, differentiates the samples according to its geographic origin but we couldn't obtain a chronological classification. This indicates that Nasca pottery of each city was always prepared with the same raw material. However we can not classified samples from the Museum of the UNMSM, since these samples were collected in all Nazca regions. The brown, orange and yellow pigments of Nasca pottery contain different amounts of manganese and iron oxides. The same elements were found in modern ceramic, but additionally Pb and Zn were detected in the yellow color of the modern ones. The presence of illita in the paste of all the analyzed samples indicates that the firing temperature of Nasca pottery did not exceed 800 deg. C. Also, the fact that the quadrupole splitting in Mossbauer spectra as a function of temperature stays more or less constant until 700 deg. C and soon it falls quickly indicates that the firing temperature was approximately 700 deg. C. This was corroborated with the same analysis on samples from modern ceramic warmed up to approximate temperatures of 700 deg. C and 900 deg. C. (author)

  3. Short-Term Forecasting Models for Photovoltaic Plants: Analytical versus Soft-Computing Techniques

    Directory of Open Access Journals (Sweden)

    Claudio Monteiro

    2013-01-01

    Full Text Available We present and compare two short-term statistical forecasting models for hourly average electric power production forecasts of photovoltaic (PV plants: the analytical PV power forecasting model (APVF and the multiplayer perceptron PV forecasting model (MPVF. Both models use forecasts from numerical weather prediction (NWP tools at the location of the PV plant as well as the past recorded values of PV hourly electric power production. The APVF model consists of an original modeling for adjusting irradiation data of clear sky by an irradiation attenuation index, combined with a PV power production attenuation index. The MPVF model consists of an artificial neural network based model (selected among a large set of ANN optimized with genetic algorithms, GAs. The two models use forecasts from the same NWP tool as inputs. The APVF and MPVF models have been applied to a real-life case study of a grid-connected PV plant using the same data. Despite the fact that both models are quite different, they achieve very similar results, with forecast horizons covering all the daylight hours of the following day, which give a good perspective of their applicability for PV electric production sale bids to electricity markets.

  4. Analytical Modelling of the Effects of Different Gas Turbine Cooling Techniques on Engine Performance =

    Science.gov (United States)

    Uysal, Selcuk Can

    In this research, MATLAB SimulinkRTM was used to develop a cooled engine model for industrial gas turbines and aero-engines. The model consists of uncooled on-design, mean-line turbomachinery design and a cooled off-design analysis in order to evaluate the engine performance parameters by using operating conditions, polytropic efficiencies, material information and cooling system details. The cooling analysis algorithm involves a 2nd law analysis to calculate losses from the cooling technique applied. The model is used in a sensitivity analysis that evaluates the impacts of variations in metal Biot number, thermal barrier coating Biot number, film cooling effectiveness, internal cooling effectiveness and maximum allowable blade temperature on main engine performance parameters of aero and industrial gas turbine engines. The model is subsequently used to analyze the relative performance impact of employing Anti-Vortex Film Cooling holes (AVH) by means of data obtained for these holes by Detached Eddy Simulation-CFD Techniques that are valid for engine-like turbulence intensity conditions. Cooled blade configurations with AVH and other different external cooling techniques were used in a performance comparison study. (Abstract shortened by ProQuest.).

  5. Examining the impact of cell phone conversations on driving using meta-analytic techniques.

    Science.gov (United States)

    Horrey, William J; Wickens, Christopher D

    2006-01-01

    The performance costs associated with cell phone use while driving were assessed meta-analytically using standardized measures of effect size along five dimensions. There have been many studies on the impact of cell phone use on driving, showing some mixed findings. Twenty-three studies (contributing 47 analysis entries) met the appropriate conditions for the meta-analysis. The statistical results from each of these studies were converted into effect sizes and combined in the meta-analysis. Overall, there were clear costs to driving performance when drivers were engaged in cell phone conversations. However, subsequent analyses indicated that these costs were borne primarily by reaction time tasks, with far smaller costs associated with tracking (lane-keeping) performance. Hands-free and handheld phones revealed similar patterns of results for both measures of performance. Conversation tasks tended to show greater costs than did information-processing tasks (e.g., word games). There was a similar pattern of results for passenger and remote (cell phone) conversations. Finally, there were some small differences between simulator and field studies, though both exhibited costs in performance for cell phone use. We suggest that (a) there are significant costs to driver reactions to external hazards or events associated with cell phone use, (b) hands-free cell phones do not eliminate or substantially reduce these costs, and (c) different research methodologies or performance measures may underestimate these costs. Potential applications of this research include the assessment of performance costs attributable to different types of cell phones, cell phone conversations, experimental measures, or methodologies.

  6. Analytical technique to address terrorist threats by chemical weapons of mass destruction

    Science.gov (United States)

    Dempsey, Patrick M.

    1997-01-01

    Terrorism is no longer an issue without effect on the American mind. We now live with the same concerns and fears that have been commonplace in other developed and third world countries for a long time. Citizens of other countries have long lived with the specter of terrorism and now the U.S. needs to be concerned and prepared for terrorist activities.T he terrorist has the ability to cause great destructive effects by focusing their effort on unaware and unprepared civilian populations. Attacks can range from simple explosives to sophisticated nuclear, chemical and biological weapons. Intentional chemical releases of hazardous chemicals or chemical warfare agents pose a great threat because of their ready availability and/or ease of production, and their ability to cause widespread damage. As this battlefront changes from defined conflicts and enemies to unnamed terrorists, we must implement the proper analytical tools to provide a fast and efficient response. Each chemical uses in a terrorists weapon leaves behind a chemical signature that can be used to identify the materials involved and possibly lead investigators to the source and to those responsible. New tools to provide fast and accurate detection for battlefield chemical and biological agent attack are emerging. Gas chromatography/mass spectrometry (GC/MS) is one of these tools that has found increasing use by the military to respond to chemical agent attacks. As the technology becomes smaller and more portable, it can be used by law enforcement personnel to identify suspected terrorist releases and to help prepare the response; define contaminated areas for evacuation and safety concerns, identify the proper treatment of exposed or affected civilians, and suggest decontamination and cleanup procedures.

  7. Metabolomic analysis using porcine skin: a pilot study of analytical techniques.

    Science.gov (United States)

    Wu, Julie; Fiehn, Oliver; Armstrong, April W

    2014-06-15

    Metabolic byproducts serve as indicators of the chemical processes and can provide valuable information on pathogenesis by measuring the amplified output. Standardized techniques for metabolome extraction of skin samples serve as a critical foundation to this field but have not been developed. We sought to determine the optimal cell lysage techniques for skin sample preparation and to compare GC-TOF-MS and UHPLC-QTOF-MS for metabolomic analysis. Using porcine skin samples, we pulverized the skin via various combinations of mechanical techniques for cell lysage. After extraction, the samples were subjected to GC-TOF-MS and/or UHPLC-QTOF-MS. Signal intensities from GC-TOF-MS analysis showed that ultrasonication (2.7x107) was most effective for cell lysage when compared to mortar-and-pestle (2.6x107), ball mill followed by ultrasonication (1.6x107), mortar-and-pestle followed by ultrasonication (1.4x107), and homogenization (trial 1: 8.4x106; trial 2: 1.6x107). Due to the similar signal intensities, ultrasonication and mortar-and-pestle were applied to additional samples and subjected to GC-TOF-MS and UHPLC-QTOF-MS. Ultrasonication yielded greater signal intensities than mortar-and-pestle for 92% of detected metabolites following GC-TOF-MS and for 68% of detected metabolites following UHPLC-QTOF-MS. Overall, ultrasonication is the preferred method for efficient cell lysage of skin tissue for both metabolomic platforms. With standardized sample preparation, metabolomic analysis of skin can serve as a powerful tool in elucidating underlying biological processes in dermatological conditions.

  8. Judgments in the selection of path generation techniques: a meta-analytic approach

    DEFF Research Database (Denmark)

    Prato, Carlo Giacomo

    2012-01-01

    objective judgments for effective route choice set generation. Initially, path generation techniques are implemented within a synthetic network to generate possible subjective choice sets considered by travelers. Next, “true model estimates” and “postulated predicted routes” are assumed from the simulation...... of a route choice model. Then, objective choice sets are applied for model estimation and results are compared to the “true model estimates”. Last, predictions from the simulation of models estimated with objective choice sets are compared to the “postulated predicted routes”. Meta-analysis allows...

  9. Review of analytical techniques to determine the chemical forms of vapours and aerosols released from overheated fuel

    International Nuclear Information System (INIS)

    Bowsher, B.R.; Nichols, A.L.

    1989-12-01

    A comprehensive review has been undertaken of appropriate analytical techniques to monitor and measure the chemical effects that occur in large-scale tests designed to study severe reactor accidents. Various methods have been developed to determine the chemical forms of the vapours, aerosols and deposits generated during and after such integral experiments. Other specific techniques have the long-term potential to provide some of the desired data in greater detail, although considerable efforts are still required to apply these techniques to the study of radioactive debris. Such in-situ and post-test methods of analysis have been also assessed in terms of their applicability to the analysis of samples from the Phebus-FP tests. The recommended in-situ methods of analysis are gamma-ray spectroscopy, potentiometry, mass spectrometry, and Raman/UV-visible absorption spectroscopy. Vapour/aerosol and deposition samples should also be obtained at well-defined time intervals during each experiment for subsequent post-test analysis. No single technique can provide all the necessary chemical data from these samples, and the most appropriate method of analysis involves a complementary combination of autoradiography, AES, IR, MRS, SEMS/EDS, SIMS/LMIS, XPS and XRD

  10. Characterization of Natural Dyes and Traditional Korean Silk Fabric by Surface Analytical Techniques

    Science.gov (United States)

    Lee, Jihye; Kang, Min Hwa; Lee, Kang-Bong; Lee, Yeonhee

    2013-01-01

    Time-of-flight secondary ion mass spectrometry (TOF-SIMS) and X-ray photoelectron spectroscopy (XPS) are well established surface techniques that provide both elemental and organic information from several monolayers of a sample surface, while also allowing depth profiling or image mapping to be carried out. The static TOF-SIMS with improved performances has expanded the application of TOF-SIMS to the study of a variety of organic, polymeric and biological materials. In this work, TOF-SIMS, XPS and Fourier Transform Infrared (FTIR) measurements were used to characterize commercial natural dyes and traditional silk fabric dyed with plant extracts dyes avoiding the time-consuming and destructive extraction procedures necessary for the spectrophotometric and chromatographic methods previously used. Silk textiles dyed with plant extracts were then analyzed for chemical and functional group identification of their dye components and mordants. TOF-SIMS spectra for the dyed silk fabric showed element ions from metallic mordants, specific fragment ions and molecular ions from plant-extracted dyes. The results of TOF-SIMS, XPS and FTIR are very useful as a reference database for comparison with data about traditional Korean silk fabric and to provide an understanding of traditional dyeing materials. Therefore, this study shows that surface techniques are useful for micro-destructive analysis of plant-extracted dyes and Korean dyed silk fabric. PMID:28809257

  11. Characterization of Natural Dyes and Traditional Korean Silk Fabric by Surface Analytical Techniques

    Directory of Open Access Journals (Sweden)

    Yeonhee Lee

    2013-05-01

    Full Text Available Time-of-flight secondary ion mass spectrometry (TOF-SIMS and X-ray photoelectron spectroscopy (XPS are well established surface techniques that provide both elemental and organic information from several monolayers of a sample surface, while also allowing depth profiling or image mapping to be carried out. The static TOF-SIMS with improved performances has expanded the application of TOF-SIMS to the study of a variety of organic, polymeric and biological materials. In this work, TOF-SIMS, XPS and Fourier Transform Infrared (FTIR measurements were used to characterize commercial natural dyes and traditional silk fabric dyed with plant extracts dyes avoiding the time-consuming and destructive extraction procedures necessary for the spectrophotometric and chromatographic methods previously used. Silk textiles dyed with plant extracts were then analyzed for chemical and functional group identification of their dye components and mordants. TOF-SIMS spectra for the dyed silk fabric showed element ions from metallic mordants, specific fragment ions and molecular ions from plant-extracted dyes. The results of TOF-SIMS, XPS and FTIR are very useful as a reference database for comparison with data about traditional Korean silk fabric and to provide an understanding of traditional dyeing materials. Therefore, this study shows that surface techniques are useful for micro-destructive analysis of plant-extracted dyes and Korean dyed silk fabric.

  12. Active alkaline traps to determine acidic-gas ratios in volcanic plumes: Sampling techniques and analytical methods

    Science.gov (United States)

    Wittmer, J.; Bobrowski, N.; Liotta, M.; Giuffrida, G.; Calabrese, S.; Platt, U.

    2014-07-01

    In situ measurements have been the basis for monitoring volcanic gas emissions for many years and—being complemented by remote sensing techniques—still play an important role to date. Concerning in situ techniques for sampling a dilute plume, an increase in accuracy and a reduction of detection limits are still necessary for most gases (e.g., CO2, SO2, HCl, HF, HBr, HI). In this work, the Raschig-Tube technique (RT) is modified and utilized for application on volcanic plumes. The theoretical and experimental absorption properties of the RT and the Drechsel bottle (DB) setups are characterized and both are applied simultaneously to the well-established Filter packs technique (FP) in the field (on Stromboli Island and Mount Etna). The comparison points out that FPs are the most practical to apply but the results are error-prone compared to RT and DB, whereas the RT results in up to 13 times higher analyte concentrations than the DB in the same sampling time. An optimization of the analytical procedure, including sample pretreatment and analysis by titration, Ion Chromatography, and Inductively Coupled Plasma Mass Spectrometry, led to a comprehensive data set covering a wide range of compounds. In particular, less abundant species were quantified more accurately and iodine was detected for the first time in Stromboli's plume. Simultaneously applying Multiaxis Differential Optical Absorption Spectroscopy (MAX-DOAS) the chemical transformation of emitted bromide into bromine monoxide (BrO) from Stromboli and Etna was determined to 3-6% and 7%, respectively, within less than 5 min after the gas release from the active vents.

  13. Comparison of Analytic Hierarchy Process, Catastrophe and Entropy techniques for evaluating groundwater prospect of hard-rock aquifer systems

    Science.gov (United States)

    Jenifer, M. Annie; Jha, Madan K.

    2017-05-01

    Groundwater is a treasured underground resource, which plays a central role in sustainable water management. However, it being hidden and dynamic in nature, its sustainable development and management calls for precise quantification of this precious resource at an appropriate scale. This study demonstrates the efficacy of three GIS-based multi-criteria decision analysis (MCDA) techniques, viz., Analytic Hierarchy Process (AHP), Catastrophe and Entropy in evaluating groundwater potential through a case study in hard-rock aquifer systems. Using satellite imagery and relevant field data, eight thematic layers (rainfall, land slope, drainage density, soil, lineament density, geology, proximity to surface water bodies and elevation) of the factors having significant influence on groundwater occurrence were prepared. These thematic layers and their features were assigned suitable weights based on the conceptual frameworks of AHP, Catastrophe and Entropy techniques and then they were integrated in the GIS environment to generate an integrated raster layer depicting groundwater potential index of the study area. The three groundwater prospect maps thus yielded by these MCDA techniques were verified using a novel approach (concept of 'Dynamic Groundwater Potential'). The validation results revealed that the groundwater potential predicted by the AHP technique has a pronounced accuracy of 87% compared to the Catastrophe (46% accuracy) and Entropy techniques (51% accuracy). It is concluded that the AHP technique is the most reliable for the assessment of groundwater resources followed by the Entropy method. The developed groundwater potential maps can serve as a scientific guideline for the cost-effective siting of wells and the effective planning of groundwater development at a catchment or basin scale.

  14. An evaluation of analytical methods, air sampling techniques, and airborne occupational exposure of metalworking fluids.

    Science.gov (United States)

    Verma, Dave K; Shaw, Don S; Shaw, M Lorraine; Julian, Jim A; McCollin, Shari-Ann; des Tombe, Karen

    2006-02-01

    This article summarizes an assessment of air sampling and analytical methods for both oil and water-based metalworking fluids (MWFs). Three hundred and seventy-four long-term area and personal airborne samples were collected at four plants using total (closed-face) aerosol samplers and thoracic samplers. A direct-reading device (DustTrak) was also used. The processes sampled include steel tube making, automotive component manufacturing, and small part manufacturing in a machine shop. The American Society for Testing and Materials (ASTM) Method PS42-97 of analysis was evaluated in the laboratory. This evaluation included sample recovery, determination of detection limits, and stability of samples during storage. Results of the laboratory validation showed (a) the sample recovery to be about 87%, (b) the detection limit to be 35 microg, and (c) sample stability during storage at room temperature to decline rapidly within a few days. To minimize sample loss, the samples should be stored in a freezer and analyzed within a week. The ASTM method should be the preferred method for assessing metalworking fluids (MWFs). The ratio of thoracic aerosol to total aerosol ranged from 0.6 to 0.7. A similar relationship was found between the thoracic extractable aerosol and total extractable aerosol. The DustTrak, with 10-microm sampling head, was useful in pinpointing the areas of potential exposure. MWF exposure at the four plants ranged from 0.04 to 3.84 mg/m3 with the geometric mean ranging between 0.22 to 0.59 mg/m3. Based on this data and the assumption of log normality, MWF exposures are expected to exceed the National Institute for Occupational Safety and Health recommended exposure limit of 0.5 mg/m3 as total mass and 0.4 mg/m3 as thoracic mass about 38% of the time. In addition to controlling airborne MWF exposure, full protection of workers would require the institution of programs for fluid management and dermal exposure prevention.

  15. New Insights into Amino Acid Preservation in the Early Oceans using Modern Analytical Techniques

    Science.gov (United States)

    Parker, E. T.; Brinton, K. L.; Burton, A. S.; Glavin, D. P.; Dworkin, J. P.; Bada, J.

    2015-12-01

    Protein- and non-protein-amino acids likely occupied the oceans at the time of the origin and evolution of life. Primordial soup-, hydrothermal vent-, and meteoritic-processes likely contributed to this early chemical inventory. Prebiotic synthesis and carbonaceous meteorite studies suggest that non-protein amino acids were likely more abundant than their protein-counterparts. Amino acid preservation before abiotic and biotic destruction is key to biomarker availability in paleoenvironments and remains an important uncertainty. To constrain primitive amino acid lifetimes, a 1992 archived seawater/beach sand mixture was spiked with D,L-alanine, D,L-valine (Val), α-aminoisobutyric acid (α-AIB), D,L-isovaline (Iva), and glycine (Gly). Analysis by high performance liquid chromatography with fluorescence detection (HPLC-FD) showed that only D-Val and non-protein amino acids were abundant after 2250 days. The mixture was re-analyzed in 2012 using HPLC-FD and a triple quadrupole mass spectrometer (QqQ-MS). The analytical results 20 years after the inception of the experiment were strikingly similar to those after 2250 days. To confirm that viable microorganisms were still present, the mixture was re-spiked with Gly in 2012. Aliquots were collected immediately after spiking, and at 5- and 9-month intervals thereafter. Final HPLC-FD/QqQ-MS analyses were performed in 2014. The 2014 analyses revealed that only α-AIB, D,L-Iva, and D-Val remained abundant. The disappearance of Gly indicated that microorganisms still lived in the mixture and were capable of consuming protein amino acids. These findings demonstrate that non-protein amino acids are minimally impacted by biological degradation and thus have very long lifetimes under these conditions. Primitive non-protein amino acids from terrestrial synthesis, or meteorite in-fall, likely experienced greater preservation than protein amino acids in paleo-oceanic environments. Such robust molecules may have reached a steady

  16. Uncertainty in soil-structure interaction analysis arising from differences in analytical techniques

    International Nuclear Information System (INIS)

    Maslenikov, O.R.; Chen, J.C.; Johnson, J.J.

    1982-07-01

    This study addresses uncertainties arising from variations in different modeling approaches to soil-structure interaction of massive structures at a nuclear power plant. To perform a comprehensive systems analysis, it is necessary to quantify, for each phase of the traditional analysis procedure, both the realistic seismic response and the uncertainties associated with them. In this study two linear soil-structure interaction techniques were used to analyze the Zion, Illinois nuclear power plant: a direct method using the FLUSH computer program and a substructure approach using the CLASSI family of computer programs. In-structure response from two earthquakes, one real and one synthetic, was compared. Structure configurations from relatively simple to complicated multi-structure cases were analyzed. The resulting variations help quantify uncertainty in structure response due to analysis procedures

  17. Analytical techniques for determination of framework oxygen isotope ratio of wairakite

    International Nuclear Information System (INIS)

    Noto, Masami; Kusakabe, Minoru; Uchida, Tetsuo.

    1990-01-01

    Dehydration techniques were developed for the analysis of isotopic ratios of framework oxygen of wairakite, one of calcium zeolites often encountered in geothermal systems. Channel water in wairakite were separated from aluminosilicate framework by dehydration in vacuum at 300 deg, 400 deg, 450 deg, 500 deg, 550 deg, 650 deg, 750 deg, 850 deg, and 950 degC, and by stepwise heating at temperatures from 300 deg to 700 degC. The oxygen isotopic analyses of the separated channel water and the residual aluminosilicate framework of wairakite indicated that dehydration at temperatures higher than 400 degC is accompanied by isotopic exchang between the framework oxygen and dehydrating water vapor. The isotopic exchange during the high temperature dehydration makes the δ 18 O of framework oxygen lower and that of channel water higher than those obtained by dehydration at 300 degC. These results are consistent with dehydration behavior of wairakite under vacuum that the maximum rate of dehydration of channel water is attained at about 400 degC. Consequently it is recommended to dehydrate wairakite at a temperature as low as possible in order to avoid the effect of the isotopic exchange. Time required to attain complete dehydration becomes longer with lowering the temperature of dehydration. To compromise these conflicting effects, the optimum conditions of dehydration have been found that most of the channel water is dehydrated at 300 degC for 24 hours, followed by stepwise heating for additional 17 hours up to 700 degC. We obtained a better than ± 0.1 reproducibility for the framework oxygen isotopic determinations with this technique. (author)

  18. INSTRUMENTS MEASURING PERCEIVED RACISM/RACIAL DISCRIMINATION: REVIEW AND CRITIQUE OF FACTOR ANALYTIC TECHNIQUES

    Science.gov (United States)

    Atkins, Rahshida

    2015-01-01

    Several compendiums of instruments that measure perceived racism and/or discrimination are present in the literature. Other works have reviewed the psychometric properties of these instruments in terms of validity and reliability and have indicated if the instrument was factor analyzed. However, little attention has been given to the quality of the factor analysis performed. The aim of this study was to evaluate the exploratory factor analyses done on instruments measuring perceived racism/racial discrimination using guidelines from experts in psychometric theory. The techniques used for factor analysis were reviewed and critiqued and the adequacy of reporting was evaluated. Internet search engines and four electronic abstract databases were used to identify 16 relevant instruments that met the inclusion/exclusion criteria. Principal component analysis was the most frequent method of extraction (81%). Sample sizes were adequate for factor analysis in 81 percent of studies. The majority of studies reported appropriate criteria for the acceptance of un-rotated factors (81%) and justified the rotation method (75%). Exactly 94 percent of studies reported partially acceptable criteria for the acceptance of rotated factors. The majority of articles (69%) reported adequate coefficient alphas for the resultant subscales. In 81 percent of the studies, the conceptualized dimensions were supported by factor analysis. PMID:25626225

  19. Zinc phthalocyanine thin film and chemical analyte interaction studies by density functional theory and vibrational techniques

    International Nuclear Information System (INIS)

    Saini, G S S; Singh, Sukhwinder; Kumar, Ranjan; Tripathi, S K; Kaur, Sarvpreet; Sathe, Vasant

    2009-01-01

    Thin films of zinc phthalocyanine have been deposited on KBr and glass substrates by the thermal evaporation method and characterized by the x-ray diffraction, optical, infrared and Raman techniques. The observed x-ray diffraction and infrared absorption spectra of as-deposited thin films suggest the presence of an α crystalline phase. Infrared and Raman spectra of thin films after exposure to vapours of ammonia and methanol have also been recorded. Shifts in the position of some IR and Raman bands in the spectra of exposed films have been observed. Some bands also show changes in their intensity on exposure. Increased charge on the phthalocyanine ring and out-of-plane distortion of the core due to interaction between zinc phthalocyanine and vapour molecules involving the fifth coordination site of the central metal ion may be responsible for the band shifts. Changes in the intensity of bands are interpreted in terms of the lowering of molecular symmetry from D 4h to C 4v due to doming of the core. Molecular parameters and Mulliken atomic charges of zinc phthalocyanine and its complexes with methanol and ammonia have been calculated from density functional theory. The binding energy of the complexes have also been calculated. Calculated values of the energy for different complexes suggest that axially coordinated vapour molecules form the most stable complex. Calculated Mulliken atomic charges show net charge transfer from vapour molecules to the phthalocyanine ring for the most stable complex.

  20. Implementation of an analytical technique for Samarium; Implementacion de una tecnica analitica para Samario

    Energy Technology Data Exchange (ETDEWEB)

    Garcia G, N. [ININ, Carretera Mexico-Toluca Km. 36.5, 52045 Estado de Mexico (Mexico)

    2004-07-01

    Since the Samarium presents the same chemical properties that the plutonium, it has been used as homologous in studies that allow us to know the behavior that the plutonium presents in solution, with the advantage of working with an inactive and not very dangerous element. At the moment studies of sorption of plutonium or samarium are made on some mineral matrices that present certain surface properties. Due to the low concentrations that are used in the studies of sorption of samarium on those reagent substrates, their detection becomes very difficult for the conventional analysis media. The luminescence is a technique that can detect lower concentrations, smaller at 1 X 10{sup -} {sup 2} M, but when fluorofors are used this limit of detection increases in several orders of magnitude. In this work it has been used the arsenazo-III as fluorofor agent since it reacts in a specific way with the samarium, forming a complex that presents a proportional luminescence to the concentration of the present samarium. The advantage of making the quantification of samarium by luminescence is that it can use the same instrumental equipment to determine the speciation of the samarium sipped in the zircon. (Author)

  1. Painted Fiberglass-Reinforced Contemporary Sculpture: Investigating Composite Materials, Techniques and Conservation Using a Multi-Analytical Approach.

    Science.gov (United States)

    Salvadori, Barbara; Cantisani, Emma; Colombini, Maria Perla; Tognon, Cecilia Gaia Rachele

    2016-01-01

    A multi-analytical approach was used to study the constituent materials, manufacturing technique, and state of conservation of a contemporary sculpture. This sculpture, entitled Nuredduna, was created by Aligi Sassu in 1995 and is located in the "Bellariva garden" in Florence (Italy). Fourier transform infrared spectroscopy (FT-IR), optical and electronic microscopy (OM and SEM-EDS), X-ray diffraction (XRD), and portable X-ray fluorescence (XRF) highlighted the multi-layered structure of the statue: fiberglass and an overlay of different layers (gel coat) applied with an unsaturated polyester resin added with aggregate materials and bromine compounds. A top-coat in acrylic black varnish, used as a finish, was also found. The combination of these materials with their different compositions, environmental impact, and even vandalism have negatively affected the state of conservation of Nuredduna, causing the loss of strata in its lower parts (legs and feet). © The Author(s) 2015.

  2. Accelerator-based analytical technique in the evaluation of some Nigeria’s natural minerals: Fluorite, tourmaline and topaz

    Science.gov (United States)

    Olabanji, S. O.; Ige, O. A.; Mazzoli, C.; Ceccato, D.; Akintunde, J. A.; De Poli, M.; Moschini, G.

    2005-10-01

    For the first time, the complementary accelerator-based analytical technique of PIXE and electron microprobe analysis (EMPA) were employed for the characterization of some Nigeria's natural minerals namely fluorite, tourmaline and topaz. These minerals occur in different areas in Nigeria. The minerals are mainly used as gemstones and for other scientific and technological applications and therefore are very important. There is need to characterize them to know the quality of these gemstones and update the geochemical data on them geared towards useful applications. PIXE analysis was carried out using the 1.8 MeV collimated proton beam from the 2.5 MV AN 2000 Van de Graaff accelerator at INFN, LNL, Legnaro, Padova, Italy. The novel results which show many elements at different concentrations in these minerals are presented and discussed.

  3. Accelerator-based analytical technique in the evaluation of some Nigeria's natural minerals: Fluorite, tourmaline and topaz

    Energy Technology Data Exchange (ETDEWEB)

    Olabanji, S.O. [Istituto Nazionale di Fisica Nucleare (INFN), Laboratori Nazionali di Legnaro (LNL), viale dell' Universita 2, 35020 Legnaro, Padova (Italy)]. E-mail: skayode2002@yahoo.co.uk; Ige, O.A. [Natural History Museum, Obafemi Awolowo University, Ile-Ife (Nigeria); Mazzoli, C. [Dipartimento di Mineralogia e Petrologia, Universita di Padova, 35100 Padova (Italy); Ceccato, D. [Istituto Nazionale di Fisica Nucleare (INFN), Laboratori Nazionali di Legnaro (LNL), viale dell' Universita 2, 35020 Legnaro, Padova (Italy); Dipartimento di Fisica, Universita di Padova, via Marzolo 8, 35100 Padova (Italy); Akintunde, J.A. [CERD, Obafemi Awolowo University, Ile-Ife (Nigeria); De Poli, M. [Istituto Nazionale di Fisica Nucleare (INFN), Laboratori Nazionali di Legnaro (LNL), viale dell' Universita 2, 35020 Legnaro, Padova (Italy); Moschini, G. [Istituto Nazionale di Fisica Nucleare (INFN), Laboratori Nazionali di Legnaro (LNL), viale dell' Universita 2, 35020 Legnaro, Padova (Italy); Dipartimento di Fisica, Universita di Padova, via Marzolo 8, 35100 Padova (Italy)

    2005-10-15

    For the first time, the complementary accelerator-based analytical technique of PIXE and electron microprobe analysis (EMPA) were employed for the characterization of some Nigeria's natural minerals namely fluorite, tourmaline and topaz. These minerals occur in different areas in Nigeria. The minerals are mainly used as gemstones and for other scientific and technological applications and therefore are very important. There is need to characterize them to know the quality of these gemstones and update the geochemical data on them geared towards useful applications. PIXE analysis was carried out using the 1.8 MeV collimated proton beam from the 2.5 MV AN 2000 Van de Graaff accelerator at INFN, LNL, Legnaro, Padova, Italy. The novel results which show many elements at different concentrations in these minerals are presented and discussed.

  4. Accelerator-based analytical technique in the evaluation of some Nigeria's natural minerals: Fluorite, tourmaline and topaz

    International Nuclear Information System (INIS)

    Olabanji, S.O.; Ige, O.A.; Mazzoli, C.; Ceccato, D.; Akintunde, J.A.; De Poli, M.; Moschini, G.

    2005-01-01

    For the first time, the complementary accelerator-based analytical technique of PIXE and electron microprobe analysis (EMPA) were employed for the characterization of some Nigeria's natural minerals namely fluorite, tourmaline and topaz. These minerals occur in different areas in Nigeria. The minerals are mainly used as gemstones and for other scientific and technological applications and therefore are very important. There is need to characterize them to know the quality of these gemstones and update the geochemical data on them geared towards useful applications. PIXE analysis was carried out using the 1.8 MeV collimated proton beam from the 2.5 MV AN 2000 Van de Graaff accelerator at INFN, LNL, Legnaro, Padova, Italy. The novel results which show many elements at different concentrations in these minerals are presented and discussed

  5. Predicting core losses and efficiency of SRM in continuous current mode of operation using improved analytical technique

    Science.gov (United States)

    Parsapour, Amir; Dehkordi, Behzad Mirzaeian; Moallem, Mehdi

    2015-03-01

    In applications in which the high torque per ampere at low speed and rated power at high speed are required, the continuous current method is the best solution. However, there is no report on calculating the core loss of SRM in continuous current mode of operation. Efficiency and iron loss calculation which are complex tasks in case of conventional mode of operation is even more involved in continuous current mode of operation. In this paper, the Switched Reluctance Motor (SRM) is modeled using finite element method and core loss and copper loss of SRM in discontinuous and continuous current modes of operation are calculated using improved analytical techniques to include the minor loop losses in continuous current mode of operation. Motor efficiency versus speed in both operation modes is obtained and compared.

  6. IMPROVING THE STUDENTS‘ READING COMPREHENSION THROUGH KNOW-WANT-LEARN (KWL TECHNIQUE TO TEACH ANALYTICAL EXPOSITION ( Class Action Research

    Directory of Open Access Journals (Sweden)

    Meike Imelda Wachyu

    2017-12-01

    Full Text Available This study is aimed at finding out the impacts of the use of Know-Want-Learn technique in improving the reading comprehension to teach analytical exposition among eleventh grade students of SMA N 2 Indramayu in the academic year of 2017/2018. The study was action research in two research cycles. In the study, the researcher collaborated with the English teachers and the students. The data of this study were qualitative in nature supported by quantitative data. Qualitative data were obtained from the results of classroom observation and collaborators‘ discussion. Quantitative data were obtained from pre-test and post test results. The instruments for collecting the data were observation guides, interview guides, and the pre-test and posttest. The data were in the form of field notes, interview transcripts, and the scores of the students‘ pre-test and posttest. The results of the two cycles show that the use of Know-WantLearn technique is effective to improve the students‘ reading comprehension. It is supported by the qualitative data which show that (1 Know-Want-Learn technique can help the teacher to scaffold the students‘ comprehension of the text by focusing on the steps before, during, and after reading; (2 Know-Want-Learn technique can help the students to preview the text, assess what they have learned after reading, and motivate their interest in reading; (3 The kind of activities given such as preeteaching vocabulary, using skimming and scanning, using fix-up strategies, and guessing meaning can help the students to read the text efficiently.

  7. Assessing the service quality of Iran military hospitals: Joint Commission International standards and Analytic Hierarchy Process (AHP) technique.

    Science.gov (United States)

    Bahadori, Mohammadkarim; Ravangard, Ramin; Yaghoubi, Maryam; Alimohammadzadeh, Khalil

    2014-01-01

    Military hospitals are responsible for preserving, restoring and improving the health of not only armed forces, but also other people. According to the military organizations strategy, which is being a leader and pioneer in all areas, providing quality health services is one of the main goals of the military health care organizations. This study was aimed to evaluate the service quality of selected military hospitals in Iran based on the Joint Commission International (JCI) standards and comparing these hospitals with each other and ranking them using the analytic hierarchy process (AHP) technique in 2013. This was a cross-sectional and descriptive study conducted on five military hospitals, selected using the purposive sampling method, in 2013. Required data collected using checklists of accreditation standards and nominal group technique. AHP technique was used for prioritizing. Furthermore, Expert Choice 11.0 was used to analyze the collected data. Among JCI standards, the standards of access to care and continuity of care (weight = 0.122), quality improvement and patient safety (weight = 0.121) and leadership and management (weight = 0.117) had the greatest importance, respectively. Furthermore, in the overall ranking, BGT (weight = 0.369), IHM (0.238), SAU (0.202), IHK (weight = 0.125) and SAB (weight = 0.066) ranked first to fifth, respectively. AHP is an appropriate technique for measuring the overall performance of hospitals and their quality of services. It is a holistic approach that takes all hospital processes into consideration. The results of the present study can be used to improve hospitals performance through identifying areas, which are in need of focus for quality improvement and selecting strategies to improve service quality.

  8. Analytic parallel-polarized light imaging technique using various light-emitting diodes: a comparison with skin conductance values.

    Science.gov (United States)

    Kim, D H; Choi, J E; Ryu, H J; Seo, S H; Kye, Y C; Ahn, H H

    2015-05-01

    The quantitative difference of the light reflected from a skin surface can be analyzed using parallel-polarized light (PPL) photography when combined with an analytic technique similar to colorimetric photography. To improve the PPL photography technique as an assessment tool for the evaluation of skin condition using light-emitting diodes (LED) of different colors. Parallel-polarized light images were taken using white and green LED illuminators. The acquired images were transformed to CIELAB coordinates. An in-house skin conductance meter was constructed to assess skin hydration level. A dermatologist evaluated the clinical grading of dryness and glossiness. These clinical severities were also compared statistically with the CIELAB values. As with the green illuminator, the correlation analysis of whole sites showed that the L* value positively correlated with age (r = 0.18677, P < 0.05), and that the a* value has negative and positive relationships with age (r = -0.20528, P < 0.05) and glossiness (r = 0.20885, P < 0.05) respectively. The correlations between CIELAB values and multiple characteristics of skin were more significant when green LED was applied than when white light was applied. In addition, coherent relationships between the grade of dryness and skin conductance values showed that visual assessment could be appropriate for the study as with objective measurement. © 2014 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  9. Rapid Late Holocene glacier fluctuations reconstructed from South Georgia lake sediments using novel analytical and numerical techniques

    Science.gov (United States)

    van der Bilt, Willem; Bakke, Jostein; Werner, Johannes; Paasche, Øyvind; Rosqvist, Gunhild

    2016-04-01

    The collapse of ice shelves, rapidly retreating glaciers and a dramatic recent temperature increase show that Southern Ocean climate is rapidly shifting. Also, instrumental and modelling data demonstrate transient interactions between oceanic and atmospheric forcings as well as climatic teleconnections with lower-latitude regions. Yet beyond the instrumental period, a lack of proxy climate timeseries impedes our understanding of Southern Ocean climate. Also, available records often lack the resolution and chronological control required to resolve rapid climate shifts like those observed at present. Alpine glaciers are found on most Southern Ocean islands and quickly respond to shifts in climate through changes in mass balance. Attendant changes in glacier size drive variations in the production of rock flour, the suspended product of glacial erosion. This climate response may be captured by downstream distal glacier-fed lakes, continuously recording glacier history. Sediment records from such lakes are considered prime sources for paleoclimate reconstructions. Here, we present the first reconstruction of Late Holocene glacier variability from the island of South Georgia. Using a toolbox of advanced physical, geochemical (XRF) and magnetic proxies, in combination with state-of-the-art numerical techniques, we fingerprinted a glacier signal from glacier-fed lake sediments. This lacustrine sediment signal was subsequently calibrated against mapped glacier extent with the help of geomorphological moraine evidence and remote sensing techniques. The outlined approach enabled us to robustly resolve variations of a complex glacier at sub-centennial timescales, while constraining the sedimentological imprint of other geomorphic catchment processes. From a paleoclimate perspective, our reconstruction reveals a dynamic Late Holocene climate, modulated by long-term shifts in regional circulation patterns. We also find evidence for rapid medieval glacier retreat as well as a

  10. Application of quality function deployment (QFD and analytic hierarchy process (AHP techniques to improve the quality of postgraduate training

    Directory of Open Access Journals (Sweden)

    Antonio Pastor Sanmillán

    2016-05-01

    Full Text Available The importance of ensuring quality in higher education is evident in the number of local, national and transnational organizations dedicated to this end. The impressive volume of works published on quality in education is further testimony to its importance. All university, traditional or on-line, has a department dedicated to the study of quality, and the academic literature in this area is extremely broad in scope. Yet in this abundant wealth of studies, methodologies, techniques, fantasies and realities in which professors and university administrators, teachers, psychologists, marketing experts and quality professionals focus their attention, there is in our opinion something basic and elemental which is frequently forgotten: to ask the student, the end user (who should be the fundamental object of our interest what aspects of postgraduate study he truly values. The goal of the present study will be to verify the usefulness of multi-criteria analysis, and of the analytic hierarchy process (AHP in particular, attached to quality function deployment (QFD, for performing this task in multicultural environments. The population chosen for our study is comprised of the students enrolled in on-site postgraduate programs at the CEF School of Business.

  11. Biomonitoring of air pollution in Jamaica through trace-element analysis of epiphytic plants using nuclear and related analytical techniques

    International Nuclear Information System (INIS)

    Vutchkov, M.; Lalor, G.C.; Preston, J.

    1999-01-01

    Air quality has been monitored at selected areas in Jamaica using high volume samplers. The results obtained, showed elevated levels of aluminium in bauxitic areas and very high lead concentrations in urban areas, from 5 to 35 times greater than in rural areas. The lower throughput of the conventional air particulate samplers however, restricts the air quality and health assessment on a nation-wide scale. Biomonitoring offers a cost-effective alternative to air-quality assessment if appropriate indicator species are chosen. The epiphytic lower plants such as lichens and mosses have been used as indicators of regional air quality in several European countries and USA. However, there is not enough studies on lichens and mosses in tropical countries, probably due to the lower occurrence of these species, which cover only 8% of the world's land surface. In Jamaica the epiphytic higher plants, represented by the genus Tillandsia are widely distributed, which make them along with the lichens and mosses potential site-specific bioindicators of air quality. The IAEA Co-ordinated Research Project entitled 'Biomonitoring of Air Pollution in Jamaica Through Trace-Element Analysis of Epiphytic Plants Using Nuclear And Related Analytical Techniques' will address these needs of the country. The primary purpose of the present study was to develop specific bioindicators of atmospheric air pollution in Jamaica, which will provide baseline information for health hazards assessment

  12. The use of nuclear related analytical techniques for the determination of ingestion and body content of trace elements

    International Nuclear Information System (INIS)

    Djojosubroto, H.; Santoso, D.; Widjajakusuma, B.

    1998-01-01

    A number of observations revealed that various human disease states are associated with measurable abnormalities of trace element levels. Until present there is no data on trace element levels in human tissues and dietary intake representing the population in Indonesia. Trace element level in various biological materials, especially human serum related to health syndrome (e.g. acute myocardial infarction and goiter prevalences) was performed by National Atomic Energy Agency in cooperation with relevant institutes. The present study is concerned with determination of ingestion and organ content of trace elements of importance in radiological protection (Cs, Sr, I, Th and U). Quantitation of the elements in the samples will be determined by neutron activation analysis, complemented by nuclear related analytical techniques, e.g. inductively coupled plasma - mass spectrometry and atomic absorption spectrometry. Samples to be analyzed consist of (a) total diets and individual staple foodstuffs, (b) autopsy specimens of liver, lung, kidney, muscle, thyroid and bone, and (c) drinking water. It seems difficult for us to define nationally representative specimens of total diets and individual staple foodstuffs. Based on these facts, in the first year activity samples of dietary intake from various socio economic levels of population in West Java will be collected. Human tissue sample is obtained from autopsy of normal persons who are killed in traffic accident or homicide victim. Traces of Th and U in drinking water are determined by neutron activation analysis following preconcentration of these elements in chelating resin Chlelex 100. (author)

  13. Effects of Mountain Ultra-Marathon Running on ROS Production and Oxidative Damage by Micro-Invasive Analytic Techniques.

    Directory of Open Access Journals (Sweden)

    Simona Mrakic-Sposta

    Full Text Available Aiming to gain a detailed insight into the physiological mechanisms involved under extreme conditions, a group of experienced ultra-marathon runners, performing the mountain Tor des Géants® ultra-marathon: 330 km trail-run in Valle d'Aosta, 24000 m of positive and negative elevation changes, was monitored. ROS production rate, antioxidant capacity, oxidative damage and inflammation markers were assessed, adopting micro-invasive analytic techniques.Forty-six male athletes (45.04±8.75 yr, 72.6±8.4 kg, 1.76±0.05 m were tested. Capillary blood and urine were collected before (Pre-, in the middle (Middle- and immediately after (Post- Race. Samples were analyzed for: Reactive Oxygen Species (ROS production by Electron Paramagnetic Resonance; Antioxidant Capacity by Electrochemistry; oxidative damage (8-hydroxy-2-deoxy Guanosine: 8-OH-dG; 8-isoprostane: 8-isoPGF2α and nitric oxide metabolites by enzymatic assays; inflammatory biomarkers (plasma and urine interleukin-6: IL-6-P and IL-6-U by enzyme-linked immunosorbent assays (ELISA; Creatinine and Neopterin by HPLC, hematologic (lactate, glucose and hematocrit and urine parameters by standard analyses.Twenty-five athletes finished the race, while twenty-one dropped out of it. A significant increase (Post-Race vs Pre of the ROS production rate (2.20±0.27 vs 1.65±0.22 μmol.min-1, oxidative damage biomarkers (8-OH-dG: 6.32±2.38 vs 4.16±1.25 ng.mg-1 Creatinine and 8-isoPGF2α: 1404.0±518.30 vs 822.51±448.91 pg.mg-1Creatinine, inflammatory state (IL-6-P: 66.42±36.92 vs 1.29±0.54 pg.mL-1 and IL-6-U: 1.33±0.56 vs 0.71±0.17 pg.mL1 and lactate production (+190%, associated with a decrease of both antioxidant capacity (-7% and renal function (i.e. Creatinine level +76% was found.The used micro-invasive analytic methods allowed us to perform most of them before, during and immediately after the race directly in the field, by passing the need of storing and transporting samples for further analysis

  14. The Effect of Using Cubing Technique Toward Writing Skill of Analytical Exposition Text of the Second Years Students at Mts Fathul Anwar Suka Maju

    OpenAIRE

    -, Zuraida; Rasyidah, Ummi; -, Eripuddin

    2015-01-01

    The purpose of the research was to find out the effect of cubing technique in students'writing skill of analytical exposition text. The findings showed that there is significant effectbetween teaching analyrical exposition text with using cubing technique. It can be seen of thevalue of t0(thitung) = 7,183 is bigger than tt(ttable) with significance 5%= 2,00 by using cubingtechnique..

  15. Thorium: one of the analytical techniques in neutronic activation and alpha spectrometry of the CDTN (Brazilian Nuclear Technology Development Center) in the last three decades

    International Nuclear Information System (INIS)

    Menezes, M.A.B.C.; Sabino, C.V.S.

    1994-01-01

    For long years, the CDTN (Brazilian Nuclear Technology Development Center ) has applied several analytical techniques in the thorium determination. This work is about the evolution of the neutronic activation in the thorium 232 analysis from the 1960's to now. The importance of the analysis request and alpha spectrometry for the thorium 228 and thorium 232 determination is emphasized. (J.A.M.M.)

  16. Investigation of size-fractionated urban aerosol and trace gases in Budapest by nuclear-related and other analytical techniques

    International Nuclear Information System (INIS)

    Salma, I.; Maenhaut, W.; Zemplen-Papp, E.; Bobvos, J.

    1998-01-01

    An air pollution study was conducted at two urban residential sites in Budapest (one representing the downtown, the other representing a wooded suburb) from 9 April till 17 May 1996. Size-fractionated aerosol samples were simultaneously collected on a daily basis, and meteorological conditions were recorded at both sampling sites. Stacked filter units (SFUs) with an upper size inlet cut-off were used as sampling device separating the urban aerosol into a coarse (about 10-2 μm equivalent aerodynamic diameter, EAD) and a fine ( 2 , SO 2 , CO and the total mass of the suspended particulate matter were measured every half hour at one of the sampling sites by commercial equipment. The SFU filters were analyzed by gravimetry for the total particle mass, by a light reflectance technique for black carbon, by particle-induced X-ray emission analysis and instrumental neutron activation analysis for elemental composition (in combination for up to 40-45 elements). The analytical results were used for characterizing the levels and the multi-elemental composition of the urban aerosol at both sampling sites and for both size fractions, for investigating the atmospheric concentrations and diurnal variation of some criteria pollutants, and for comparing the time-trends of aerosols and trace gases. Identification of the major source types of the aerosol fractions and trace gases, and assessment of the relative contribution from these sources are to be accomplished by multivariate receptor modeling. The present paper reports on the status of the air pollution study, and gives a discussion of the results

  17. Does leaf chemistry differentially affect breakdown in tropical versus temperate streams? Importance of standardized analytical techniques to measure leaf chemistry

    Science.gov (United States)

    Marcelo Ardon; Catherine M. Pringle; Susan L. Eggert

    2009-01-01

    Comparisons of the effects of leaf litter chemistry on leaf breakdown rates in tropical vs temperate streams are hindered by incompatibility among studies and across sites of analytical methods used to...

  18. Big data analytics from strategic planning to enterprise integration with tools, techniques, NoSQL, and graph

    CERN Document Server

    Loshin, David

    2013-01-01

    Big Data Analytics will assist managers in providing an overview of the drivers for introducing big data technology into the organization and for understanding the types of business problems best suited to big data analytics solutions, understanding the value drivers and benefits, strategic planning, developing a pilot, and eventually planning to integrate back into production within the enterprise. Guides the reader in assessing the opportunities and value propositionOverview of big data hardware and software architecturesPresents a variety of te

  19. Are we Breathing Clean Air in Metro Manila? (Nuclear and Related Analytical Techniques and Receptor Modeling Revealing the Real Score)

    International Nuclear Information System (INIS)

    Pabroa, Preciosa Corazon B.

    2015-01-01

    Air Particulate matter (APM) is a mixture of different pollutant sources which can be of anthropogenic and/or natural origin, of which the size of great concern with regard to adverse effects on human health are generally less than 10μm (Referred to as PM10). Identification and apportionment of pollutant sources is important to be able to have better understanding of prevailing conditions in the area and thus better air quality management can be applied. APM (PM10) at sampling sites in Metro Manila (Philippines) has been monitored since 1998 for the primary purpose of source identification and source apportionment. APM samples (fractionated into coarse (PM2.5-10) and fine (PM2.5) fractions) were collected using a Gent air sampler. Particulate mass was determined by gravimetry and black carbon by reflectometry organic carbon/elemental carbon by thermal optical reflectance. Elemental concentrations were determined using nuclear and related analytical techniques such as the particle-induced x-ray emission (PIXE) spectrometry and x-ray fluorescence (XRF) spectrometry. Source apportionment of fine air particles was done using PMF2. Result show PM10 levels to be in compliance to the Philippine 1-year guideline value of 60 μg m“-“3 but in exceedance of the US EPA 1-year standard of 15 μg m“-“3 and the WHO 1-year guideline value of 10 μg m“-“3. Annual mean % Fine BC levels range from 33% to 59%, but individual points can reach up to more than 80% of the PM2.5 levels. Pb level in the fine fraction exhibit decreasing trend coinciding with the introduction of unleaded-gasoline starting in 1998 and the eventual phase-out of the use of leaded-gasoline in 2001. Six air pollution sources have been identified in the fine fraction with vehicular emissions making up the bulk at about 50%. Other sources are smoke, secondary S, fine soil and industry. Addressing problems regarding traffic-related activities can greatly reduce the fine particulate pollution problems

  20. A study on environmental pollution monitoring and occupational health in the Capital Iron and Steel Company, Beijing, China, using nuclear and related analytical techniques

    International Nuclear Information System (INIS)

    Chai Zhifang; Qian Qinfang; Feng Xiangqian; Ding Wenjun; Kuang Minxu; Wang Hongyu; Zhang Yongchen

    2000-01-01

    Since the First Research Coordination Meeting in Vienna, 20-24 October 1997, on the CRP on Assessment of Levels and Health-effects of Airborne Particulate Matter in Mining, Metal Refining and Metal Working Industries using Nuclear and related Analytical Techniques, our research group has completed the work plan defined by the contract with the Agency, including: (1) collection of airborne particulate, plant and soil samples from sites around the Capital Iron and Steel Company and of human hair, urine, and blood samples from the exposed workers and the control group; (2) validation of the analytical methods (NAA, XRF, SRXRF, JCP-AES etc.) by analyzing appropriate reference materials and by participating in relevant Agency's quality assurance exercises; and (3) analysis of part of the collected samples and preliminary discussion on the available analytical results. Finally, plan for future work was outlined as well. (author)

  1. Technique for approximate analytical calculating the internuclear cascade initiated by medium-energy nucleons in accelerator shields

    International Nuclear Information System (INIS)

    Kazarnovskij, M.V.; Matushko, G.K.; Matushko, V.L.; Par'ev, Eh.Ya.; Serezhnikov, S.V.

    1981-01-01

    The problem on propagation of the internuclear cascade initiated by nucleons of 0.1-1 GeV energy in accelerator schielding is solved approximately in the analytical form. Analytical expressions for the function of spatial, angular and energy distribution of the flux density of nucleons with the energy above 20 MeV and some functionals from it are obtained. The results of the calculations obtained by the developed methods are compared with calculations obtained by the method of direct simulation. It is shown that at the atomic mass of shielding material [ru

  2. Experiences with IAEA project: TC Regional Project on Quality Control and Quality Assurance for Nuclear Analytical Techniques (RER/2/004)

    International Nuclear Information System (INIS)

    Glavic-Cindro, Denis; Korun, Matjaz

    2002-01-01

    In the TC Regional Project on Quality Control and Quality Assurance for Nuclear Analytical Techniques RER/2/004, 12 laboratories from east and central European countries participated. Within this project 4 workshops, 2 audit inspections and 2 proficiency tests were organized. The aim of this project was to help these laboratories to implement quality assurance system based on the ISO 17025 standard and to help them on the way towards accreditation. (author)

  3. Carbon and nitrogen determination in Zr by photon or proton activation analysis. Comparison between the results obtained by this method and other analytical techniques

    International Nuclear Information System (INIS)

    Petit, J.; Gosset, J.; Engelmann, C.

    1977-01-01

    Carbon and nitrogen are determined by the following nuclear reactions: 12 C(γ,n) 11 C and 14 N(p,α) 11 C. The performances of the method and the main interferences are considered. The process developed for the separation of carbon-11 from zirconium is described and its efficiency evaluated. The results obtained are compared with those given by different laboratories using various analytical techniques [fr

  4. Exploring the Efficacy of Behavioral Skills Training to Teach Basic Behavior Analytic Techniques to Oral Care Providers

    Science.gov (United States)

    Graudins, Maija M.; Rehfeldt, Ruth Anne; DeMattei, Ronda; Baker, Jonathan C.; Scaglia, Fiorella

    2012-01-01

    Performing oral care procedures with children with autism who exhibit noncompliance can be challenging for oral care professionals. Previous research has elucidated a number of effective behavior analytic procedures for increasing compliance, but some procedures are likely to be too time consuming and expensive for community-based oral care…

  5. Elemental composition of coal fly ash: Malta coal power station in the Mpumalanga province in South Africa case study using nuclear and related analytical techniques

    International Nuclear Information System (INIS)

    Eze, Ch.P.; Fatoba, O.; Madzivire, G.; Petrik, L.F.; Ostrovnaya, T.M.; Frontas'eva, M.V.; Nechaev, A.N.

    2013-01-01

    Epithermal neutron activation analysis along with ICP-OES, LA ICP-MS, and XRF were used to determine the elemental composition of coal fly ash from the Malta coal power station in the Mpumalanga province of South Africa. A total of 54 major, trace and rare-earth elements were obtained by the four analytical techniques. The results were compared and the discrepancies discussed to show the merits and drawbacks of each of the techniques. It was shown that the elemental content of this particular coal fly ash is of the same order as the NIST standard reference material Coal Fly Ash 1633b

  6. Development of an absolute x-ray fluorescence technique and high accuracy analytical methods for the determination of metals in catalytic materials

    International Nuclear Information System (INIS)

    LaBrecque, J.J.; Parker, W.C.

    1982-09-01

    A technique to produce characteristic x-rays by direct beta excitation for x-ray fluorescence analysis is presented. This is carried out by the introduction of 100 uCi of Pm-147 or Ni-63 to a small sample, which is placed directly in the window of a modified Si(Li) semiconductor. Corrected intensities are only given at 300 seconds for synthetic standards oscillating within the range 22 3 was used, to which the radioisotope was directly added. Preliminary results of the determination of eleven different radionuclides by means of an elementary x-ray analysis by using a new analytical technique, are discussed. In this technique the radioisotope and the sample are directly mixed, then this source-sample in the detector window and is protected from contamination with a thin plastic film. Future and possible applications of this technique are presented

  7. Characterization of the permutations by block that have reversible one dimensional cellular automata; Caracterizacion de las permutaciones en bloque que representan automatas celulares unidimensionales reversibles

    Energy Technology Data Exchange (ETDEWEB)

    Seck Tuoh Mora, J. C. [Instituto Politecnico Nacional, Mexico, D. F. (Mexico)

    2001-06-01

    We present a review of reversible one dimensional cellular automata and their representation by block permutations. We analyze in detail the behavior of such block permutations to get their characterization. [Spanish] En el siguiente escrito se da una revision a la representacion y comportamiento de automatas celulares unidimensionales reversibles por medio de permutaciones en bloque. Hacemos un analisis detallado del comportamiento de dichas permutaciones para obtener su caracterizacion.

  8. An appraisal of neutron activation analysis and other analytical techniques for the determination of arsenic, selenium and tin in environmental samples

    International Nuclear Information System (INIS)

    Peterson, P.J.; Girling, C.A.; Klumpp, D.W.; Minski, M.J.

    1979-01-01

    The paper presents an experimental comparison between neutron activation analysis, atomic absorption spectrophotometry and fluorescence spectrophotometry used for the determination of trace amounts of As, Se and Sn and the other two analytical techniques mentioned. Gamma-ray spectrometry has been used to determine 76 As (tsub(1/2)=26.3 h) after 1 day's irradiation at a thermal neutron flux of 1.6x10 12 n.cm -2 .s -1 . High sensitivity was also obtained using an atomic absorption spectrophotometer coupled with covalent hydride generation. Advantages of the latter technique include simplicity of operation, high speed of analysis and negligible background correction. When used in conjuction with selective reduction and a cold-trap this method quantitatively distinguishes between the valence states and some methylated derivatives. Selenium has been analysed by gamma-ray spectrometry using 77 Sesup(m) (tsub(1/2)=17.5 s) after cyclic activation at a thermal neutron flux of 2x10 12 n.cm -2 .s -1 . Atomic absorption spectrophotometry following hydride generation, or fluorescence spectrophotometry of the 2,3 diaminonaphthalene complex constitute additional sensitive analytical methods for the determination of Se. These have the added advantage that valence states can be selectively measured. Low concentrations of Sn have been determined by neutron activation analysis and by spectrophotometric techniques using phenylfluorone as the complexing reagent, but these methods depend on selective extraction of Sn(IV) iodide. Whilst maintaining high sensitivity, these problems were avoided by using the hydride generation technique with an atomic absorption spectrophotometer. Comparative analytical values for Bowen's kale and NBS orchard leaves are presented

  9. Dissolved Silver in Marine Waters: Reviewing Three Decades of Advances in Analytical Techniques and Understanding its Biogeochemical Cycling

    Science.gov (United States)

    Ndungu, K.; Flegal, A. R., Jr.

    2015-12-01

    Although billions of dollars have been spent over the past half-century to reduce contamination of U.S. waters, quantifying parts-per-billion reductions in surface water concentration since has been relatively unsuccessful. The reasons for the failure in identifying the benefits of these remediative efforts include: (i) historic (pre-1980) problems in accurately sampling and analyzing trace element concentrations at parts-per-billion level, so that temporal reductions in trace metal contamination reflected improved sampling and analytical accuracy rather than real decreases in those concentrations; (ii) limited seasonal and long term research. Silver in its ionic form is more toxic to aquatic organisms than any other metal except Hg. Because Ag is not common naturally in the environment, its elevated presence in water, sediment or biological tissues is usually indicative of anthropogenic influences. However, there is very little published data on Ag levels in both water and sediment. The published studies include Ag levels in a few U.S. estuarine waters, including detailed and time series studies for the San Francisco Estuary system by the WIGS lab at UC Santa Cruz. In the open Ocean, Ag measurements are limited to a few studies in the North and South Pacific, The North and South Atlantic. However, as Gallon and Flegal recently noted, there is no available data on Ag concentrations from the Indian Ocean! Most of the dissolved Ag data from the Atlantic was made in WIGS lab at UC Santa Cruz Analytical determination of Ag in seawater has come a long way since Murozumi reported the first dissolved Ag measurements from the N. Pacific in 1981 using isotope dilution MS after solvent extraction. In this presentation I will review analytical developments for Ag determination in the last three decades. I will also highlight the missing data gaps and present new tentative data on dissolved Ag concentration and cycling in polar regions including the Antarctic (Amundsen Sea

  10. A REVIEW ON THE ANALYTICAL TECHNIQUES USED FOR THE DETERMINATION OF PARACETAMOL IN PHARMACEUTICAL FORMULATIONS AND BIOLOGICAL FLUIDS

    OpenAIRE

    Aisha Noreen; Kiran Qadeer; Zubair Anwar; Iqbal Ahmad

    2016-01-01

    Paracetamol (PM) is an active metabolite of phenacetin and belongs to p-aminophenol derivatives. It is also termed as acetaminophen. PM is one of the non-steroidal anti-inflammatory drugs (NSAIDs) which is used as an analgesic and antipyretic agent. It is an OTC drug and is used as a common household analgesic. It is not used as a substitute of aspirin or any other NSAIDs. It is a weak cyclooxygenase (COX) 1 and 2 inhibitor but may inhibit COX-3 in the central nervous system. Many analytical ...

  11. Introduction to analytical techniques of beam-target interactions and resolutions; Introduction aux techniques d`analyse interactions rayonnement-matiere et resolutions

    Energy Technology Data Exchange (ETDEWEB)

    Ruste, J.

    1995-08-01

    For several years, new analysis and observation techniques have been developed, which have considerably improved material research. Almost all these techniques are based on the interaction of a beam of `primary particles` (electrons, photons, ions, particles, etc) with target. Correct and appropriate use of these techniques requires a good knowledge of these interactions and their consequences (emissions of `secondary particles`, modifications of the primary beam and target, etc). The first part of this report deals with the radiation/material interactions according to the nature of the radiation and its energy. The nature and consequences of the interaction of an electromagnetic wave, a beam of electrons, ions and neutrons are examined over an extended range of energy from MeV to MeV. Certain notions such as the analysis area, spatial resolutions or limits of detection can also be defined. In the second part, some of the most important and widespread techniques of analysis and observation are compared in terms of properties and performance. In particular, there is a brief principle of the technique, nature of the data obtained, spatial resolution, and the limits of detection with today`s methods permit. (author). 5 refs., 23 figs., 9 tabs.

  12. Neutron Capture Radiography: Neutron Capture Radiography:a technique for isotopic labelling and analytical imaging with a few stable isotopes

    Directory of Open Access Journals (Sweden)

    Michel Thellier

    2006-01-01

    Full Text Available NCR (neutron capture radiography may be used successfully for the imaging of one of the stable isotopes of a few chemical elements (especially 6Li and 10B, possibly also 14N, 17O, and others and for labelling experiments using these stable isotopes. Other physical techniques compete with NCR. However, NCR can remain extremely useful in a certain number of cases, because it is usually more easily done and is less expensive than the other techniques.

  13. Neutron Capture Radiography: Neutron Capture Radiography:a technique for isotopic labelling and analytical imaging with a few stable isotopes

    OpenAIRE

    Thellier, Michel; Ripoll, Camille

    2006-01-01

    NCR (neutron capture radiography) may be used successfully for the imaging of one of the stable isotopes of a few chemical elements (especially 6Li and 10B, possibly also 14N, 17O, and others) and for labelling experiments using these stable isotopes. Other physical techniques compete with NCR. However, NCR can remain extremely useful in a certain number of cases, because it is usually more easily done and is less expensive than the other techniques.

  14. Analytical chemistry

    International Nuclear Information System (INIS)

    Anon.

    1985-01-01

    The division for Analytical Chemistry continued to try and develope an accurate method for the separation of trace amounts from mixtures which, contain various other elements. Ion exchange chromatography is of special importance in this regard. New separation techniques were tried on certain trace amounts in South African standard rock materials and special ceramics. Methods were also tested for the separation of carrier-free radioisotopes from irradiated cyclotron discs

  15. A note on the solution of general Falkner-Skan problem by two novel semi-analytical techniques

    Directory of Open Access Journals (Sweden)

    Ahmed Khidir

    2015-12-01

    Full Text Available The aim of this paper is to give a presentation of two new iterative methods for solving non-linear differential equations, they are successive linearisation method and spectral homotopy perturbation method. We applied these techniques on the non-linear boundary value problems of Falkner-Skan type. The methods used to find a recursive former for higher order equations that are solved using the Chebyshev spectral method to find solutions that are accurate and converge rapidly to the full numerical solution. The methods are illustrated by progressively applying the technique to the Blasius boundary layer equation, the Falkner-Skan equation and finally, the magnetohydrodynamic (MHD Falkner-Skan equation. The solutions are compared to other methods in the literature such as the homotopy analysis method and the spectral-homotopy analysis method with focus on the accuracy and convergence of this new techniques.

  16. Theory of stochastic differential equations with jumps and applications mathematical and analytical techniques with applications to engineering

    CERN Document Server

    SITU, Rong

    2005-01-01

    Derivation of Ito's formulas, Girsanov's theorems and martingale representation theorem for stochastic DEs with jumpsApplications to population controlReflecting stochastic DE techniqueApplications to the stock market. (Backward stochastic DE approach)Derivation of Black-Scholes formula for market with and without jumpsNon-linear filtering problems with jumps.

  17. Development of the double-pulse technique to improve the analytical performance of Laser Induced Breakdown Spectroscopy (LIBS) on solids: Nuclear and geological applications

    International Nuclear Information System (INIS)

    Gautier, C.

    2005-10-01

    The double-pulse technique has been developed to improve the analytical performance of Laser Ablation coupled to Optical Emission Spectroscopy (LA/OES). This approach relies on the addition of a second time-resolved laser pulse to the classical LA/OES system. It has been studied on aluminium alloys according to different geometries of the two laser beams (orthogonal and collinear geometries) before being applied to different materials (synthetic glass, rock, steel, sodium chloride). The increase in emission intensity depends on the temporal parameters, on the excitation energy level of the emission line, on the concentration of the studied element and on the analyzed matrix. The double-pulse LA/OES technique can be particularly interesting to improve the sensitivity towards vitreous matrices containing elements emitting lines with high excitation energy levels. (author)

  18. Development of an analytical model for the determination of 60Co in aqueous samples by atomic absorption and gamma spectrometry techniques

    International Nuclear Information System (INIS)

    Solis A, N. A.

    2015-01-01

    The applications of the nuclear energy in industry and medicine generate radioactive wastes that must be isolated and confined in order to limit its spread in the biosphere. These types of wastes are generated in hospitals, industry, research centers and nuclear power plants (during de fuel cycle). The radioactive elements (radionuclides) cannot be destroyed by any known method, either chemical or mechanical. Its final destruction is produced by radioactive decay, which makes them stable isotopes, or nuclear transmutation being bombarded with atomic particles. Consequently, the radioactive waste management is to control the radioactive discharges and reduce to tolerable limits, eliminating of effluents and wastes the radionuclides of interest, concentrating them so they can be stored or evacuated so that later not appear in dangerous concentration in the biosphere. In Mexico, the main generators of radioactive wastes are the nuclear power plant of Laguna Verde in Veracruz, Hospitals of the public and private sector, in addition Instituto Nacional de Investigaciones Nucleares (ININ) some institutes and facilities of the UNAM and Instituto Politecnico Nacional (IPN) and industries among others. The aqueous radioactive wastes, particularly those from the nuclear power plants contain traces of cobalt-60. Currently there is no model or analytical technique for the separation of this radionuclide, so it became necessary to develop an analytical model for separation and facilitate their disposal. In this paper was shown that atomic absorption and gamma spectrometry techniques can separate the active concentration of the inactive, which is important because the total concentration can be associated through direct relationships with the wear of metal parts of the nuclear reactor, since the metal alloys of the same reactor containing a fraction of cobalt. Also this analytical and mathematical model that can be reproducible and applicable to full sets of samples and that this

  19. Various analytical techniques used for the measurement of isotopic purity of heavy water at Madras Atomic Power Station

    International Nuclear Information System (INIS)

    Satyanarayanan, V.; Umapathy, P.; Bhaskaran, R.; Nagarajan, J.; Pradeep, Jeena; Ayyar, S.R.

    2008-01-01

    The paper deals with the various techniques used for the measurement of isotopic purity of heavy water samples received from different sources viz. reactor systems, heavy water upgrading plant and fresh consignment from heavy water production plants. Heavy water is used in PHWRs as moderator and primary coolant. Isotopic Purity is an important parameter to be monitored/analysed regularly for both the systems. There is a minimum isotopic purity level to be maintained in the moderator system due to neutron economy/fuel burnup and in the case of coolant system the measurement is of paramount importance due to its safety considerations. The selection of the method of analysis depends on the isotopic range. The techniques used to measure the isotopic purity of heavy water are a) Infrared Spectrophotometry b) Refractometry c) Densitometry. Infrared spectrometer uses the property of molecular absorption of IR radiation by HOD species and the absorbance is the measure of isotopic purity. This technique is generally used for measuring high isotopic (80-99.98%) and low isotopic samples. Refractometer uses the property of refractive index of heavy water. The difference in refractive indices of light water and heavy water is 0.0048. A 1 % change in D 2 O concentration would thus equal to 0.000048 refractive index units. This method is used for determining the approximate isotopic value of a sample. Density meter uses the property of difference in densities of light and heavy water. The difference in density of 99.999% D 2 O and light water is 0.107540 which covers the whole range of interest. The experience gained with these techniques in the measurements of isotopic purity of various samples are presented in this paper. (author)

  20. Comparison of 4 analytical techniques based on atomic spectrometry for the determination of total tin in canned foodstuffs

    OpenAIRE

    2011-01-01

    Abstract Different techniques for the determination of total tin in beverage and canned food by atomic spectrometry were compared. The performance characteristics of Inductively Coupled Plasma Mass Spectrometry (ICP-MS), Hydride Generation Inductively Coupled Plasma Atomic Emission Spectrometry (HG-ICP-AES), Electrothermal Atomization Atomic Absorption Spectrometry (ETA-AAS) and Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES) were determined in term of linearity, ...

  1. Background air pollution studies in urban and rural areas of Bangladesh using nuclear-related analytical techniques

    International Nuclear Information System (INIS)

    Khan, A.H.; Khaliquzzaman, M.; Tarafdar, S.A.; Biswas, S.K.; Islam, A.

    1994-01-01

    The trace element constituents of aerosols such as Hg, Pb, Cd, Se, As, Cu, Zn, Cr, V, etc. are permanent pollutants affecting the biosphere and the general ecosystem. The measurements of these elements collected on air filters, in rainwater, and also in some bioindicators such as moss and lichen, can yield very significant information on the origin, transport, removal and deposition of these pollutants. A set of sensitive and precise nuclear-related and chemical methods such as PIXE, EDXRF, FAAS and DPASV have, therefore, been developed and applied to analyze a number of trace and minor elements in air particulates, coal fly ash, plant materials, moss and water. Further analytical developments would include INAA and TRXRF. Some of the results from air particulates (integral), coal fly ash and moss analyses are presented to illustrate the experience level of the Laboratory. A core programme of study on the trace element composition of aerosols from urban and rural atmosphere in Bangladesh has been planned for implementation within the framework of this CRP. 10 refs, 1 fig., 5 tabs

  2. A Novel Environmental Performance Evaluation of Thailand’s Food Industry Using Structural Equation Modeling and Fuzzy Analytic Hierarchy Techniques

    Directory of Open Access Journals (Sweden)

    Anirut Pipatprapa

    2016-03-01

    Full Text Available Currently, the environment and sustainability are important topics for every industry. The food industry is particularly complicated in this regard because of the dynamic and complex character of food products and their production. This study uses structural equation modeling (SEM and a fuzzy analytic hierarchy process (FAHP to investigate which factors are suitable for evaluating the environmental performance of Thailand’s food industry. A first-stage questionnaire survey was conducted with 178 managers in the food industry that obtained a certificate from the Department of Industrial Work of Thailand to synthesize the performance measurement model and the significance of the relationship between the indicators. A second-stage questionnaire measured 18 experts’ priorities regarding the criteria and sub-factors involved in the different aspects and assessment items regarding environmental performance. SEM showed that quality management, market orientation, and innovation capability have a significantly positive effect on environmental performance. The FAHP showed that the experts were most concerned about quality management, followed by market orientation and innovation capability; the assessment items for quality policy, quality assurance, and customer orientation were of the most concern. The findings of this study can be referenced and support managerial decision making when monitoring environmental performance.

  3. Identification of heavy metals sources in the Mexico city atmosphere, using the proton induced x-ray analytical technique and multifactorial statistics techniques

    International Nuclear Information System (INIS)

    Hernandez M, B.

    1997-01-01

    The objectives of this work are: to identify the heavy metals present in the air, and its concentrations. To know the behavior from the polluting chemical elements to the long of an annual cycle corresponding to 1990, based on the concentrations of the same ones, obtained through the PIXE technique. To identify the suitable statistical methods to use to the data of metals concentration in form of total suspended particle (PST), found in this investigation. To relate the concentrations and the meteorological parameters considered to be able to suggest the possible pollution sources. In function of the obtained results, to serve as base to the decisions making and measures control that are planned by diverse institutions focused to the problem of the atmospheric pollution in the Metropolitan area of Mexico City (ZMCM). (Author)

  4. Laser Induced Breakdown Spectroscopy compared with conventional plasma optical emission techniques for the analysis of metals - A review of applications and analytical performance

    Science.gov (United States)

    Bengtson, A.

    2017-08-01

    This review is focused on a comparison of LIBS with the two most common plasma Optical Emission Spectroscopy (OES) techniques for analysis of metals; spark OES and glow discharge (GD) OES. It is shown that these two techniques have only minor differences in analytical performance. An important part of the paper reviews a direct comparison of the analytical figures of merit for bulk analysis of steels using spark and LIBS sources. The comparison was carried out using one instrument with interchangeable sources, eliminating differences related to the optical system and detectors. It was found that the spark provides slightly better analytical figures of merit. The spark analysis is considerably faster, the simple design of the spark stand has enabled complete automation, both properties of great importance in the metallurgical industry for routine analysis. The analysis of non-metallic inclusions (NMI) with spark and LIBS is presented, in the case of the spark this has become known as Pulse Distribution Analysis (PDA). A very significant difference between the techniques is that the electrical spark typically evaporates 100 times more material than a single laser pulse, resulting in complete evaporation of an NMI present in the evaporated metal. The major advantage of LIBS is that it is localised with very good lateral resolution. The major advantages of spark is that it is much faster (can be done simultaneous with the bulk analysis) and easier to quantify. Compositional Depth Profiling (CDP) is compared for GD-OES and LIBS. It is shown that for applications where GD-OES is well suited, e.g. coated metallic sheet, GD-OES still performs slightly better than LIBS. Similar to the case of NMI analysis, the major advantage of LIBS is the great lateral resolution. This allows elemental surface mapping, as well as CDP of very small areas on μm scale. One further advantage of LIBS is that samples of almost any material, shape and size can be analysed, whereas GD-OES has

  5. Emerging analytical separation techniques with high throughput potential for pharmaceutical analysis, part I: Stationary phase and instrumental developments in LC.

    Science.gov (United States)

    Pieters, Sigrid; Dejaegher, Bieke; Vander Heyden, Yvan

    2010-07-01

    In recent years, a trend of change has been observed within pharmaceutical industry. As modern drug discovery has reached a remarkable level of complexity and drugs need to be discovered, developed and produced against strict timelines and within cost- and regulatory constraints, industry seeks "lean" solutions to increase productivity. Among them, increasing the sample throughput of the ever-growing number of necessary (routine) analyses has become a popular target to cut precious time. For the last thirty years, High-Performance Liquid Chromatography (HPLC) has been the leading technology when it comes to various analyses in pharmaceutical industry; however, its necessity of serial analyses taking typically 10-45 min has been a sample throughput-limiting barrier. Lately, the fundamentals of HPLC have been exploited to raise new technologies that can speed up analyses to ground breaking limits, without compromising separation efficiency. This paper reviews some promising technologies, i.e. totally porous sub-2microm particles accompanied by pressures up to 1000 bar (Ultra-Performance Liquid Chromatography or UPLC), fused-core particle technology, monolithic supports and High Temperature Liquid Chromatography (HTLC), having the potential to take LC to the next level in pharmaceutical industry. As each analytical method has its own demands, the advances of the above technologies are discussed for different applications in pharmaceutical analysis where high-throughput analysis can be meaningful, i.e. in a drug discovery and development setting, and in quality operations. Both chemical and biological pharmaceuticals are considered. We discuss the perspectives of these technologies and their realizations up to now in high-throughput pharmaceutical analysis.

  6. Analytical study of the effects of soft tissue artefacts on functional techniques to define axes of rotation.

    Science.gov (United States)

    De Rosario, Helios; Page, Álvaro; Besa, Antonio

    2017-09-06

    The accurate location of the main axes of rotation (AoR) is a crucial step in many applications of human movement analysis. There are different formal methods to determine the direction and position of the AoR, whose performance varies across studies, depending on the pose and the source of errors. Most methods are based on minimizing squared differences between observed and modelled marker positions or rigid motion parameters, implicitly assuming independent and uncorrelated errors, but the largest error usually results from soft tissue artefacts (STA), which do not have such statistical properties and are not effectively cancelled out by such methods. However, with adequate methods it is possible to assume that STA only account for a small fraction of the observed motion and to obtain explicit formulas through differential analysis that relate STA components to the resulting errors in AoR parameters. In this paper such formulas are derived for three different functional calibration techniques (Geometric Fitting, mean Finite Helical Axis, and SARA), to explain why each technique behaves differently from the others, and to propose strategies to compensate for those errors. These techniques were tested with published data from a sit-to-stand activity, where the true axis was defined using bi-planar fluoroscopy. All the methods were able to estimate the direction of the AoR with an error of less than 5°, whereas there were errors in the location of the axis of 30-40mm. Such location errors could be reduced to less than 17mm by the methods based on equations that use rigid motion parameters (mean Finite Helical Axis, SARA) when the translation component was calculated using the three markers nearest to the axis. Copyright © 2017 Elsevier Ltd. All rights reserved.

  7. Ancient artefacts and modern analytical techniques - Usefulness of laser ablation ICP-MS demonstrated with ancient gold coins

    Energy Technology Data Exchange (ETDEWEB)

    Junk, Stephan A. E-mail: staj@ww.tu-freiberg.de

    2001-07-01

    Laser ablation (LA) is a sampling technique which is well suited for the characterization of precious archaeological artefacts. Using the example of Celtic gold coins - so-called 'Regenbogenschuesselchen' - the benefits of LA attached to an inductively coupled plasma mass spectrometry (ICP-MS) with a sector field mass spectrometer and multiple Faraday detectors are reviewed. It will be shown that osmium isotopic ratios determined by this method are a valuable guide for investigations on the provenance of Celtic gold. The precision and accuracy achieved with LA-ICP-MS are discussed. Corrections for chemical interferences and mass bias are exemplified.

  8. Application of Nuclear Analytical Techniques in Elemental Characterization of Wadi El-Nakhil Alabaster, Central Eastern Desert, Egypt

    OpenAIRE

    Zain M. Alamoudi; A. El-Taher

    2016-01-01

    Instrumental neutron activation analysis (INAA) is a powerful technique for trace element determination in rocks. Nine alabaster samples were collected from Wadi El-Nakhil located at the intersection of lat. 26°10′50′′N and long. 34°03′40′′E, central Eastern Desert, Egypt, for investigation by INAA and Energy Depressive X-Ray Fluorescence (EDXRF). The samples were irradiated by thermal neutrons at the TRIGA Mainz research reactor at a neutron flux of 7 × 1011 n/cm2·s. Twenty-two elements were...

  9. Inversion of the amplitude of the two-dimensional analytic signal of the magnetic anomaly by the particle swarm optimization technique

    Science.gov (United States)

    Srivastava, Shalivahan; Agarwal, B. N. P.

    2010-08-01

    Amplitude of the 2-D analytic signal of the magnetic anomaly profile is independent of the directions of the Earth's magnetic field vector and remnant magnetization of the causative source. It exhibits peaks corresponding to the locations of the corners of a causative source, modelled by say a polygon. It also exhibits a peak corresponding to different idealized source geometries related to the structural indices. This amplitude is computed from the first-order horizontal and vertical derivatives of the observed magnetic anomaly and is relatively less noisy than second-order derivatives. The amplitude can also be computed directly from the measured derivatives. Particle swarm optimization (PSO)-a global optimization technique is applied to interpret this amplitude in terms of the horizontal location and depth, constant (related to magnetization) and various source geometries through structural indices. Applicability of the proposed technique is evaluated through the analyses of simulated magnetic anomalies (noise-free and corrupted with 20 per cent random noise) over different types of source geometries, namely, a thin dyke and a contact with high accuracy in parameter estimation. Studies on the choices of search parameter space reveal that a relatively wide search space can be assigned. Practical applicability of the proposed technique has been demonstrated through three magnetic anomaly profiles digitized from published literature. The results of PSO, Euler deconvolution, enhanced local wavenumber and drill hole are comparable. PSO results also seem to be more stable than other techniques.

  10. Identifying and Prioritizing Effective Factors on Classifying A Private Bank Customers by Delphi Technique and Analytical Hierarchy Process (AHP

    Directory of Open Access Journals (Sweden)

    S. Khayatmoghadam

    2013-05-01

    Full Text Available Banking industry development and presence of different financial institutions cause to increase competition in customer and their capitals attraction so that there are about 28 banks and many credit and financial institutions from which 6 banks are public and 22 banks are private. Among them, public banks have a more appropriate situation than private banks with regard to governmental relations and support and due to geographical expansion and longer history. But due to lack of above conditions; private banks try to attract customers with regarding science areas to remedy this situation. Therefore, in this study we are decided to review banking customers from a different viewpoint. For this reason, we initially obtained ideal indications from banking viewpoint in two-story of uses and resources customers using experts and Delphi technique application which based on this, indicators such as account workflow, account average, lack of returned cheque, etc and in uses section, the amount of facility received, the amount of received warranties, etc, were determined. Then, using a Hierarchical Analysis (AHP method and experts opinions through software Expert Choice11, priority of these criteria were determined and weight of each index was determined. It should be noted that statistical population of bank experts associated with this study were queue and staff. Also obtained results can be used as input for customer grouping in line with CRM techniques implementation.

  11. Attenuated Total Reflectance Fourier Transform Infrared Spectroscopy: An analytical technique to understand therapeutic responses at the molecular level.

    Science.gov (United States)

    Kalmodia, Sushma; Parameswaran, Sowmya; Yang, Wenrong; Barrow, Colin J; Krishnakumar, Subramanian

    2015-11-16

    Rapid monitoring of the response to treatment in cancer patients is essential to predict the outcome of the therapeutic regimen early in the course of the treatment. The conventional methods are laborious, time-consuming, subjective and lack the ability to study different biomolecules and their interactions, simultaneously. Since; mechanisms of cancer and its response to therapy is dependent on molecular interactions and not on single biomolecules, an assay capable of studying molecular interactions as a whole, is preferred. Fourier Transform Infrared (FTIR) spectroscopy has become a popular technique in the field of cancer therapy with an ability to elucidate molecular interactions. The aim of this study, was to explore the utility of the FTIR technique along with multivariate analysis to understand whether the method has the resolution to identify the differences in the mechanism of therapeutic response. Towards achieving the aim, we utilized the mouse xenograft model of retinoblastoma and nanoparticle mediated targeted therapy. The results indicate that the mechanism underlying the response differed between the treated and untreated group which can be elucidated by unique spectral signatures generated by each group. The study establishes the efficiency of non-invasive, label-free and rapid FTIR method in assessing the interactions of nanoparticles with cellular macromolecules towards monitoring the response to cancer therapeutics.

  12. Investigation of preparation techniques for δ2H analysis of keratin materials and a proposed analytical protocol

    Science.gov (United States)

    Qi, H.; Coplen, T.B.

    2011-01-01

    Accurate hydrogen isotopic measurements of keratin materials have been a challenge due to exchangeable hydrogen in the sample matrix and the paucity of appropriate isotopic reference materials for calibration. We found that the most reproducible δ2HVSMOW-SLAP and mole fraction of exchangeable hydrogen, x(H)ex, of keratin materials were measured with equilibration at ambient temperature using two desiccators and two different equilibration waters with two sets of the keratin materials for 6 days. Following equilibration, drying the keratin materials in a vacuum oven for 4 days at 60 °C was most critical. The δ2H analysis protocol also includes interspersing isotopic reference waters in silver tubes among samples in the carousel of a thermal conversion elemental analyzer (TC/EA) reduction unit. Using this analytical protocol, δ2HVSMOW-SLAP values of the non-exchangeable fractions of USGS42 and USGS43 human-hair isotopic reference materials were determined to be –78.5 ± 2.3 ‰ and –50.3 ± 2.8 ‰, respectively. The measured x(H)ex values of keratin materials analyzed with steam equilibration and N2 drying were substantially higher than those previously published, and dry N2 purging was unable to remove absorbed moisture completely, even with overnight purging. The δ2H values of keratin materials measured with steam equilibration were about 10 ‰ lower than values determined with equilibration in desiccators at ambient temperatures when on-line evacuation was used to dry samples. With steam equilibrations the x(H)ex of commercial keratin powder was as high as 28 %. Using human-hair isotopic reference materials to calibrate other keratin materials, such as hoof or horn, can introduce bias in δ2H measurements because the amount of absorbed water and the x(H)ex values may differ from those of unknown samples. Correct δ2HVSMOW-SLAP values of the non-exchangeable fractions of unknown human-hair samples can be determined with atmospheric moisture

  13. Enhancement of the dissolution profile of Tenoxicam by a solid dispersion technique and its analytical evaluation using HPLC.

    Science.gov (United States)

    Darwish, M K; Foad, M M

    2009-02-01

    The aim of the present study was to improve the dissolution, and therefore the bioavailability, of poorly water-soluble tenoxicam. Solid dispersions consisting of tenoxicam with two different types of polymers were prepared. The first type were PVP(30) and β-cyclodextrin and the second type were two superdisintegrants, explotab and croscarmellose sodium. A solid dispersion with an explotab ratio of 1:1 (F(8)) had the best dissolution profile compared to all of the prepared solid dispersions as well as the pure drug, which was then formulated into tablets (T(2)F(8)). T(2)F(8) had far better dissolution than commercial tablets, releasing only 28.3% of the drug, while T(2)F(8) exhibited 96.5% drug release in 20 min. T(2)F(8) was subjected to analytical validation as well as stability studies. The formulation was found to be stable after storage at 40°C for one month, 40°C and 75% relative humidity (40°C/75% RH) for one month, and 60°C for 15 days; this was confirmed by the absence of degraded product prepared in the laboratory by refluxing the drug with 1 N NaOH for 15 min. Infrared (IR) spectroscopy and differential scanning calorimetry (DSC) were performed on T(2)F(8) to identify physicochemical interactions between the drug and carrier, hence its effect on dissolution. A simple and rapid HPLC method was also developed to determine tenoxicam in human plasma and was then used in a pharmacokinetic study. Plasma samples were analyzed on a C(18) column with a mobile phase of 0.02 M sodium acetate:acetonitrile: methanol (7:2.5:0.5, v/v/v) and UV detection at 375 nm. The linear range of the plasma concentration was 1-16 μg/mL with a detection limit of 158 ng/mL. Within-day and between-day precision expressed as the relative standard deviation was less than 2%. The proposed method was successfully used in a bioequivalence study in healthy volunteers and mean pharmacokinetic parameters were calculated.

  14. Comparison of sediment pollution in the rivers of the Hungarian Upper Tisza Region using non-destructive analytical techniques

    International Nuclear Information System (INIS)

    Osan, Janos; Toeroek, Szabina; Alfoeldy, Balint; Alsecz, Anita; Falkenberg, Gerald; Baik, Soo Yeun; Van Grieken, Rene

    2007-01-01

    The rivers in the Hungarian Upper Tisza Region are frequently polluted mainly due to mining activities in the catchment area. At the beginning of 2000, two major mining accidents occurred in the Romanian part of the catchment area due to the failure of a tailings dam releasing huge amounts of cyanide and heavy metals to the rivers. Surface sediment as well as water samples were collected at six sites in the years 2000-2003, from the northeast-Hungarian section of the Tisza, Szamos and Tur rivers. The sediment pollution of the rivers was compared based on measurements of bulk material and selected single particles, in order to relate the observed compositions and chemical states of metals to the possible sources and weathering of pollution. Non-destructive X-ray analytical methods were applied in order to obtain different kinds of information from the same samples or particles. In order to identify the pollution sources, their magnitude and fate, complementary analyses were carried out. Heterogeneous particulate samples were analyzed from a large geographical territory and a 4-year time period. Individual particles were analyzed only from the 'hot' samples that showed elevated concentrations of heavy metals. Particles that were classified as anthropogenic were finally analyzed to identify trace concentrations and chemical states of heavy metals. Although the Tisza river was affected by water pollution due to the two major mining accidents at the beginning of 2000, the concentration of heavy metals in sediments decreased to the mineral background level 1 year after the pollution event. In the tributaries Szamos and Tur, however, no significant decrease of the heavy metal concentrations was observed in the recent years, indicating a continuous pollution. Among the water suspended particles collected from river Tur, fibers of unknown origin were observed by electron microscopy; these particles were aluminosilicates enriched in Zn and Mn. Cd was also concentrated in

  15. Assessment of levels and 'health-effects' of airborne particulate matter in mining, metal refining and metal working industries using nuclear and related analytical techniques

    International Nuclear Information System (INIS)

    2008-01-01

    The International Atomic Energy Agency (IAEA) has been supporting, over the years, several coordinated research programmes (CRPs) on various research topics related to environmental issues impacting human health. The primary aim of these CRPs has been to help enhance the research and development capabilities in the Member States, particularly among developing countries; to identify the sources of various environmental contaminants and evaluate their fate; and to provide for the basis of improved health among human populations by the use of nuclear and related analytical techniques. The CRP on Assessment of Levels and Health-Effects of Airborne Particulate Matter in Mining, Metal Refining and Metal Working Industries using nuclear and related analytical techniques focused on improving the competence for research on workplace monitoring in a variety of industrial environments. The personal monitoring of the APM (airborne particulate matter) of the exposed workforce was carried out for the first time by many participants. Nuclear and related analytical techniques, including the application of proton micro-beam, were used to generate the trace element concentration profiles in various biomarkers tissues of the exposed workers. The quality assurance/quality control (QA/QC) aspects related to the CRP were addressed through intercomparison analyses of APM on filter paper samples and freeze dried human urine samples to generate validated data. These data have helped to generate correlations between the occupational exposure measured and the magnitude of the biological response. Such new information is essential to evolve procedures to considerably reduce/eliminate the pollutants in the workplace environment and to make informed decisions on the evolution of standards in working environments aimed at preserving the health of workers. The purpose of this TECDOC is to provide an overview of the activities performed under the CRP by the participants. The overall achievements

  16. Accelerator-based analytical technique in the study of some anti-diabetic medicinal plants of Nigeria

    International Nuclear Information System (INIS)

    Olabanji, S.O.; Omobuwajo, O.R.; Ceccato, D.; Adebajo, A.C.; Buoso, M.C.; Moschini, G.

    2008-01-01

    Diabetes mellitus, a clinical syndrome characterized by hyperglycemia due to deficiency of insulin, is a disease involving the endocrine pancreas and causes considerable morbidity and mortality in the world. In Nigeria, many plants, especially those implicated in herbal recipes for the treatment of diabetes, have not been screened for their elemental constituents while information on phytochemistry of some of them is not available. There is therefore the need to document these constituents as some of these plants are becoming increasingly important as herbal drugs or food additives. The accelerator-based technique PIXE, using the 1.8 MeV collimated proton beam from the 2.5 MV AN 2000 Van de Graaff accelerator at INFN, LNL, Legnaro (Padova) Italy, was employed in the determination of the elemental constituents of these anti-diabetic medicinal plants. Leaves of Gardenia ternifolia, Caesalpina pulcherrima, Solemostenon monostachys, whole plant of Momordica charantia and leaf and stem bark of Hunteria umbellata could be taken as vegetables, neutraceuticals, food additives and supplements in the management of diabetes. However, Hexabolus monopetalus root should be used under prescription

  17. Accelerator-based analytical technique in the study of some anti-diabetic medicinal plants of Nigeria

    Science.gov (United States)

    Olabanji, S. O.; Omobuwajo, O. R.; Ceccato, D.; Adebajo, A. C.; Buoso, M. C.; Moschini, G.

    2008-05-01

    Diabetes mellitus, a clinical syndrome characterized by hyperglycemia due to deficiency of insulin, is a disease involving the endocrine pancreas and causes considerable morbidity and mortality in the world. In Nigeria, many plants, especially those implicated in herbal recipes for the treatment of diabetes, have not been screened for their elemental constituents while information on phytochemistry of some of them is not available. There is therefore the need to document these constituents as some of these plants are becoming increasingly important as herbal drugs or food additives. The accelerator-based technique PIXE, using the 1.8 MeV collimated proton beam from the 2.5 MV AN 2000 Van de Graaff accelerator at INFN, LNL, Legnaro (Padova) Italy, was employed in the determination of the elemental constituents of these anti-diabetic medicinal plants. Leaves of Gardenia ternifolia, Caesalpina pulcherrima, Solemostenon monostachys, whole plant of Momordica charantia and leaf and stem bark of Hunteria umbellata could be taken as vegetables, neutraceuticals, food additives and supplements in the management of diabetes. However, Hexabolus monopetalus root should be used under prescription.

  18. Application of Nuclear Analytical Techniques in Elemental Characterization of Wadi El-Nakhil Alabaster, Central Eastern Desert, Egypt

    Directory of Open Access Journals (Sweden)

    Zain M. Alamoudi

    2016-01-01

    Full Text Available Instrumental neutron activation analysis (INAA is a powerful technique for trace element determination in rocks. Nine alabaster samples were collected from Wadi El-Nakhil located at the intersection of lat. 26°10′50′′N and long. 34°03′40′′E, central Eastern Desert, Egypt, for investigation by INAA and Energy Depressive X-Ray Fluorescence (EDXRF. The samples were irradiated by thermal neutrons at the TRIGA Mainz research reactor at a neutron flux of 7 × 1011 n/cm2·s. Twenty-two elements were determined, namely, As, Ba, Ca, Co, Cr, Sc, Fe, Hf, K, Mg, Mn, Na, Rb, U, Zn, Zr, Lu, Ce, Sm, La, Yb, and Eu. The chemical analysis of alabaster indicated having high contents of CaO and MgO and LOI and low contents of SiO2, Al2O3, Na2O, K2O, MnO, and Fe2O3.

  19. Direct Trace Element Analysis of Liquid Blood Samples by In-Air Ion Beam Analytical Techniques (PIXE-PIGE).

    Science.gov (United States)

    Huszank, Robert; Csedreki, László; Török, Zsófia

    2017-02-07

    There are various liquid materials whose elemental composition is of interest in various fields of science and technology. In many cases, sample preparation or the extraction can be complicated, or it would destroy the original environment before the analysis (for example, in the case of biological samples). However, multielement direct analysis of liquid samples can be realized by an external PIXE-PIGE measurement system. Particle-induced X-ray and gamma-ray emission spectroscopy (PIXE, PIGE) techniques were applied in external (in-air) microbeam configuration for the trace and main element determination of liquid samples. The direct analysis of standard solutions of several metal salts and human blood samples (whole blood, blood serum, blood plasma, and formed elements) was realized. From the blood samples, Na, P, S, Cl, K, Ca, Fe, Cu, Zn, and Br elemental concentrations were determined. The focused and scanned ion beam creates an opportunity to analyze very small volume samples (∼10 μL). As the sample matrix consists of light elements, the analysis is possible at ppm level. Using this external beam setup, it was found that it is possible to determine elemental composition of small-volume liquid samples routinely, while the liquid samples do not require any preparation processes, and thus, they can be analyzed directly. In the case of lower concentrations, the method is also suitable for the analysis (down to even ∼1 ppm level) but with less accuracy and longer measurement times.

  20. Accelerator-based analytical technique in the study of some anti-diabetic medicinal plants of Nigeria

    Energy Technology Data Exchange (ETDEWEB)

    Olabanji, S.O. [Istituto Nazionale di Fisica Nucleare (INFN), Laboratori Nazionali di Legnaro (LNL), I-35020 Legnaro, Padova (Italy)], E-mail: skayode2002@yahoo.co.uk; Omobuwajo, O.R. [Department of Pharmacognosy, Obafemi Awolowo University, Ile-Ife (Nigeria); Ceccato, D. [Istituto Nazionale di Fisica Nucleare (INFN), Laboratori Nazionali di Legnaro (LNL), I-35020 Legnaro, Padova (Italy); Dipartmento di Fisica, Universita di Padova, Padova (Italy); Adebajo, A.C. [Department of Pharmacognosy, Obafemi Awolowo University, Ile-Ife (Nigeria); Buoso, M.C. [Istituto Nazionale di Fisica Nucleare (INFN), Laboratori Nazionali di Legnaro (LNL), I-35020 Legnaro, Padova (Italy); Moschini, G. [Istituto Nazionale di Fisica Nucleare (INFN), Laboratori Nazionali di Legnaro (LNL), I-35020 Legnaro, Padova (Italy); Dipartmento di Fisica, Universita di Padova, Padova (Italy)

    2008-05-15

    Diabetes mellitus, a clinical syndrome characterized by hyperglycemia due to deficiency of insulin, is a disease involving the endocrine pancreas and causes considerable morbidity and mortality in the world. In Nigeria, many plants, especially those implicated in herbal recipes for the treatment of diabetes, have not been screened for their elemental constituents while information on phytochemistry of some of them is not available. There is therefore the need to document these constituents as some of these plants are becoming increasingly important as herbal drugs or food additives. The accelerator-based technique PIXE, using the 1.8 MeV collimated proton beam from the 2.5 MV AN 2000 Van de Graaff accelerator at INFN, LNL, Legnaro (Padova) Italy, was employed in the determination of the elemental constituents of these anti-diabetic medicinal plants. Leaves of Gardenia ternifolia, Caesalpina pulcherrima, Solemostenon monostachys, whole plant of Momordica charantia and leaf and stem bark of Hunteria umbellata could be taken as vegetables, neutraceuticals, food additives and supplements in the management of diabetes. However, Hexabolus monopetalus root should be used under prescription.

  1. Neutron flux characterization of californium-252 Neutron Research Facility at the University of Texas - Pan American by nuclear analytical technique

    Science.gov (United States)

    Wahid, Kareem; Sanchez, Patrick; Hannan, Mohammad

    2014-03-01

    In the field of nuclear science, neutron flux is an intrinsic property of nuclear reaction facilities that is the basis for experimental irradiation calculations and analysis. In the Rio Grande Valley (Texas), the UTPA Neutron Research Facility (NRF) is currently the only neutron facility available for experimental research purposes. The facility is comprised of a 20-microgram californium-252 neutron source surrounded by a shielding cascade containing different irradiation cavities. Thermal and fast neutron flux values for the UTPA NRF have yet to be fully investigated and may be of particular interest to biomedical studies in low neutron dose applications. Though a variety of techniques exist for the characterization of neutron flux, neutron activation analysis (NAA) of metal and nonmetal foils is a commonly utilized experimental method because of its detection sensitivity and availability. The aim of our current investigation is to employ foil activation in the determination of neutron flux values for the UTPA NSRF for further research purposes. Neutron spectrum unfolding of the acquired experimental data via specialized software and subsequent comparison for consistency with computational models lends confidence to the results.

  2. CB4-03: An Eye on the Future: A Review of Data Virtualization Techniques to Improve Research Analytics

    Science.gov (United States)

    Richter, Jack; McFarland, Lela; Bredfeldt, Christine

    2012-01-01

    and drawbacks of these techniques.

  3. Contribution of analytical nuclear techniques in the reconstruction of the Brazilian pre-history analysing archaeological ceramics of Tupiguarani tradition

    International Nuclear Information System (INIS)

    Faria, Gleikam Lopes de Oliveira; Menezes, Maria Angela de B.C.; Silva, Maria Aparecida

    2011-01-01

    Due to the high importance of the material vestiges for a culture of a nation, the Brazilian Council for Environment determined that the license to establish new enterprises are subjected to a technical report concerning environmental impact, including archaeological sites affected by that enterprise. Therefore, answering the report related to the Program for Prospection and Rescue of the Archaeological Patrimony of the Areas impacted by the installation of the Second Line of Samarco Mining Pipeline, the archaeological interventions were carried out along the coast of Espirito Santo. Tupi-Guarani Tradition vestiges were found there, where the main evidence was a interesting ceramics. Archaeology can fill the gap between ancient population and modern society elucidating the evidences found in archaeological sites. In this context, several ceramic fragments found in the archaeological sites - Hiuton and Bota-Fora - were analyzed by neutron activation technique, k 0-standardization method, at CDTN using the TRIGA MARK I IPR-R1 reactor, in order to characterize their elemental composition. The elements As, Ba, Br, Ce, Co, Cr, Cs, Eu, Fe, Ga, Hf, K, La, Na, Nd, Rb, Sb, Sc, Sm, Ta, Tb, Th, U, Yb, Zn and Zr were determined. Applying R software, a robust multivariate statistical analysis, the results pointed out that the pottery from the sites was made with clay from different sources. The X-ray powder diffraction analyses were carried out to determine the mineral composition and Moessbauer spectroscopy was applied to provide information on both the degree of burning and atmosphere in order to reconstruct the Indian burning strategies temperature used on pottery production. (author)

  4. Contribution of analytical nuclear techniques in the reconstruction of the Brazilian pre-history analysing archaeological ceramics of Tupiguarani tradition

    Energy Technology Data Exchange (ETDEWEB)

    Faria, Gleikam Lopes de Oliveira; Menezes, Maria Angela de B.C.; Silva, Maria Aparecida, E-mail: menezes@cdtn.br, E-mail: cida@cdtn.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil). Servico de Reator e Tecnicas Analiticas. Laboratorio de Ativacao Neutronica; Sabino, Claudia de V.S. [PUC-Minas, Belo Horizonte, MG (Brazil)

    2011-07-01

    Due to the high importance of the material vestiges for a culture of a nation, the Brazilian Council for Environment determined that the license to establish new enterprises are subjected to a technical report concerning environmental impact, including archaeological sites affected by that enterprise. Therefore, answering the report related to the Program for Prospection and Rescue of the Archaeological Patrimony of the Areas impacted by the installation of the Second Line of Samarco Mining Pipeline, the archaeological interventions were carried out along the coast of Espirito Santo. Tupi-Guarani Tradition vestiges were found there, where the main evidence was a interesting ceramics. Archaeology can fill the gap between ancient population and modern society elucidating the evidences found in archaeological sites. In this context, several ceramic fragments found in the archaeological sites - Hiuton and Bota-Fora - were analyzed by neutron activation technique, {sub k}0-standardization method, at CDTN using the TRIGA MARK I IPR-R1 reactor, in order to characterize their elemental composition. The elements As, Ba, Br, Ce, Co, Cr, Cs, Eu, Fe, Ga, Hf, K, La, Na, Nd, Rb, Sb, Sc, Sm, Ta, Tb, Th, U, Yb, Zn and Zr were determined. Applying R software, a robust multivariate statistical analysis, the results pointed out that the pottery from the sites was made with clay from different sources. The X-ray powder diffraction analyses were carried out to determine the mineral composition and Moessbauer spectroscopy was applied to provide information on both the degree of burning and atmosphere in order to reconstruct the Indian burning strategies temperature used on pottery production. (author)

  5. Achievements and advantages of participation in the IAEA project RER 002/004/1999-2001 'QA/QC of Nuclear Analytical Techniques'

    International Nuclear Information System (INIS)

    Vata, Ion; Cincu, Em.

    2002-01-01

    The National Institute for Physics and Engineering 'Horia Hulubei' (IFIN-HH) decided in the late 1990s to start applying nuclear techniques in economy and social life on a routine scale; reaching this goal implied achieving first-rate analytical performances and complying with the QA/QC requirements, as detailed in the ISO 17025. The IAEA Project appeared in 1999 as the best opportunity and tool for our specialists to become familiar with the standard requirements and begin to implement them in their operations, thus further enabling them to apply for accreditation according to the international criteria. This report outlines the experience gained from the participation in the project. The accomplishments of the project are presented and the main difficulties are identified

  6. Some examples of the application of an analytical technique to ion-optical calculations for a new injector of the Lund Pelletron accelerator

    International Nuclear Information System (INIS)

    Hellborg, R.; Faarinen, M.; Magnusson, C.-E.; Bazhal, S.V.; Romanov, V.A.

    2001-01-01

    The 3UDH Pelletron tandem accelerator in Lund is being developed to be more suitable for accelerator mass spectrometry of heavy ions. This development includes the installation of an electrostatic and a magnetic analyzer in a new injector aimed to obtain better mass and energy separation. In the present paper some applications of the first-order analytical calculation technique, used at the design stage of the new injector, are discussed. The estimation of the maximum possible opening of the analyzer slits was carried out, followed by the calculation of the analyzer acceptances. The values of the acceptances for the two transversal planes, as well as their contours are given. Some results of more detailed numerical calculation of the ion beam transport through the analyzers are reported

  7. Unilateral NMR, 13C CPMAS NMR spectroscopy and micro-analytical techniques for studying the materials and state of conservation of an ancient Egyptian wooden sarcophagus.

    Science.gov (United States)

    Proietti, Noemi; Presciutti, Federica; Di Tullio, Valeria; Doherty, Brenda; Marinelli, Anna Maria; Provinciali, Barbara; Macchioni, Nicola; Capitani, Donatella; Miliani, Costanza

    2011-03-01

    A multi-technique approach was employed to study a decorated Egyptian wooden sarcophagus (XXV-XXVI dynasty, Third Intermediate Period), belonging to the Museo del Vicino Oriente of the Sapienza University of Rome. Portable non-invasive unilateral NMR was applied to evaluate the conservation state of the sarcophagus. Moreover, using unilateral NMR, a non-invasive analytical protocol was established to detect the presence of organic substances on the surface and/or embedded in the wooden matrix. This protocol allowed for an educated sampling campaign aimed at further investigating the state of degradation of the wood and the presence of organic substances by (13)C cross polarization magic angle spinning (CPMAS) NMR spectroscopy. The composition of the painted layer was analysed by optical microscopy (OM), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), Raman and surface enhanced (resonance) Raman spectroscopy (SERS/SERRS), infrared and GC-MS techniques, evidencing original components such as clay minerals, Egyptian green, indigo, natural gums, and also highlighting restoration pigments and alteration compounds. The identification of the wood, of great value for the reconstruction of the history of the artwork, was achieved by means of optical microscopy.

  8. The application of nuclear analytical techniques in the study of elements distribution pattern associated with Gubrunde Uranium occurrence in North-Eastern Nigeria

    International Nuclear Information System (INIS)

    Ige, T. A.

    1994-01-01

    Prospecting for high grade uranium deposits in North-East Nigeria has, over the years, amongst other reasons, been handicapped by lack of adequate understanding of the elemental primary and secondary dispersion patterns associated with known occurrences in the region. One hundred and forty-four samples from low grade Uranium occurrences at Gubrunde horst consisting of disseminated ores and host rocks, bark and soil samples were therefore, analysed for forty-four elements using Neutron Activation Analysis (with Gamma Spectrometry - INAA and Delayed Neutron Counting - DNC) and Energy Dispersive X-ray Fluorescence Techniques. The analytical data have been evaluated using multivariate statistical techniques. The results show some major element groupings (association). The first group consists of Ph, Ba, Ce and Sm (LREE) that are enriched with increasing uranium concentration in the mineralized zone and are therefore, capable of serving as path-finder elements for uranium. The second group comprising of K 2 O, CaO, Na 2 O and the HREE are depleted in the mineralized zones due to the action of hydrothermal fluids and are indicative of altered/mineralized rocks. The third group consists of the other elements which feature little or no significant enrichment with uranium but may be associated with ferruginisation (hematite) and possibly refractory minerals. It is found that iron does not correlate well with uranium in this report which may indicate ferruginization and mineralization as two independent processes

  9. Radar chart array analysis to visualize effects of formulation variables on IgG1 particle formation as measured by multiple analytical techniques.

    Science.gov (United States)

    Kalonia, Cavan; Kumru, Ozan S; Kim, Jae Hyun; Middaugh, C Russell; Volkin, David B

    2013-12-01

    This study presents a novel method to visualize protein aggregate and particle formation data to rapidly evaluate the effect of solution and stress conditions on the physical stability of an immunoglobulin G (IgG) 1 monoclonal antibody (mAb). Radar chart arrays were designed so that hundreds of microflow digital imaging (MFI) solution measurements, evaluating different mAb formulations under varying stresses, could be presented in a single figure with minimal loss of data resolution. These MFI radar charts show measured changes in subvisible particle number, size, and morphology distribution as a change in the shape of polygons. Radar charts were also created to visualize mAb aggregate and particle formation across a wide size range by combining data sets from size-exclusion chromatography, Archimedes resonant mass measurements, and MFI. We found that the environmental/mechanical stress condition (e.g., heat vs. agitation) was the most important factor in influencing the particle size and morphology distribution with this IgG1 mAb. Additionally, the presence of NaCl exhibited a pH and stress-dependent behavior resulting in promotion or inhibition mAb particle formation. This data visualization technique provides a comprehensive analysis of the aggregation tendencies of this IgG1 mAb in different formulations with varying stresses as measured by different analytical techniques. © 2013 Wiley Periodicals, Inc. and the American Pharmacists Association.

  10. Application of radar chart array analysis to visualize effects of formulation variables on IgG1 particle formation as measured by multiple analytical techniques

    Science.gov (United States)

    Kalonia, Cavan; Kumru, Ozan S.; Kim, Jae Hyun; Middaugh, C. Russell; Volkin, David B.

    2013-01-01

    This study presents a novel method to visualize protein aggregate and particle formation data to rapidly evaluate the effect of solution and stress conditions on the physical stability of an IgG1 monoclonal antibody (mAb). Radar chart arrays were designed so that hundreds of Microflow Digital Imaging (MFI) solution measurements, evaluating different mAb formulations under varying stresses, could be presented in a single figure with minimal loss of data resolution. These MFI radar charts show measured changes in subvisible particle number, size and morphology distribution as a change in the shape of polygons. Radar charts were also created to visualize mAb aggregate and particle formation across a wide size range by combining data sets from size exclusion chromatography (SEC), Archimedes resonant mass measurements, and MFI. We found that the environmental/mechanical stress condition (e.g., heat vs. agitation) was the most important factor in influencing the particle size and morphology distribution with this IgG1 mAb. Additionally, the presence of NaCl exhibited a pH and stress dependent behavior resulting in promotion or inhibition mAb particle formation. This data visualization technique provides a comprehensive analysis of the aggregation tendencies of this IgG1 mAb in different formulations with varying stresses as measured by different analytical techniques. PMID:24122556

  11. Characterization of the billow applied to Tuxpan, Veracruz; Caracterizacion del oleaje aplicada a Tuxpan, Veracruz

    Energy Technology Data Exchange (ETDEWEB)

    Rosales Sierra, Victor

    1999-07-01

    In this work, the criteria for the wave temporal and spectral statistical analysis were reviewed. These analysis are applied to the site Tuxpan, Veracruz, in the Mexican Gulf coast. In the temporal statistic analysis, the high (Rayleigh, Tayfun and Carter) and period (Bretchneider, Cavanie and Longuet-Higgins) theoretic probability distributions are compared with field data from Tuxpan. In the other hand, in the frequency domain analysis, the theoretic spectrums (Bretchneider-Mitsuyasu, Jonswap-Hasselmann, Pierson-Moscowitz, Neumann, ITTC, ISSC, TMA and Ochi-Hubble) are compared with the one obtained from Tuxpan measurements, then changes are made to some spectrums in order to better couple to field data. Finally, some recommendations are made to improve the wave data acquisition and analysis methods. From the study results, it's important to mention that the Tayfun high probability distribution and the Cavanie period probability distribution better fit Tuxpan field data. In the spectral analysis, the Bretchneider spectrum, modified by Mitsuyasu, better coupled to the spectrum obtained from Tuxpan field data. In the temporal statistical analysis, correct the mean level using the parabolic approximation, in order to eliminate the tidal and long period wave effects, it is recommended. For the registered individual wave calculus the zero up cross method was used. [Spanish] En este trabajo se revisan los criterios para el analisis estadisticos temporal y espectral del oleaje, mismos que son aplicados para la caracterizacion del oleaje en Tuxpan, Veracruz. En cuanto al analisis estadistico temporal, se comparan las distribuciones teoricas de probabilidad de altura de Rayleigh, Tayfun y Carter; y las de periodo de Bretchneider, Cavanie y Longuet-Higgins contra las resultantes de las mediciones en campo. Por otro lado y concerniente al analisis en el dominio de la frecuencia, se comparan los espectros teoricos de Bretchneider- Mitsuyasu, Jonswap-Hasselmann, Pierson

  12. Web Analytics

    Science.gov (United States)

    EPA’s Web Analytics Program collects, analyzes, and provides reports on traffic, quality assurance, and customer satisfaction metrics for EPA’s website. The program uses a variety of analytics tools, including Google Analytics and CrazyEgg.

  13. Critical Assessment of Analytical Techniques in the Search for Biomarkers on Mars: A Mummified Microbial Mat from Antarctica as a Best-Case Scenario.

    Science.gov (United States)

    Blanco, Yolanda; Gallardo-Carreño, Ignacio; Ruiz-Bermejo, Marta; Puente-Sánchez, Fernando; Cavalcante-Silva, Erika; Quesada, Antonio; Prieto-Ballesteros, Olga; Parro, Víctor

    2017-10-01

    The search for biomarkers of present or past life is one of the major challenges for in situ planetary exploration. Multiple constraints limit the performance and sensitivity of remote in situ instrumentation. In addition, the structure, chemical, and mineralogical composition of the sample may complicate the analysis and interpretation of the results. The aim of this work is to highlight the main constraints, performance, and complementarity of several techniques that have already been implemented or are planned to be implemented on Mars for detection of organic and molecular biomarkers on a best-case sample scenario. We analyzed a 1000-year-old desiccated and mummified microbial mat from Antarctica by Raman and IR (infrared) spectroscopies (near- and mid-IR), thermogravimetry (TG), differential thermal analysis, mass spectrometry (MS), and immunological detection with a life detector chip. In spite of the high organic content (ca. 20% wt/wt) of the sample, the Raman spectra only showed the characteristic spectral peaks of the remaining beta-carotene biomarker and faint peaks of phyllosilicates over a strong fluorescence background. IR spectra complemented the mineralogical information from Raman spectra and showed the main molecular vibrations of the humic acid functional groups. The TG-MS system showed the release of several volatile compounds attributed to biopolymers. An antibody microarray for detecting cyanobacteria (CYANOCHIP) detected biomarkers from Chroococcales, Nostocales, and Oscillatoriales orders. The results highlight limitations of each technique and suggest the necessity of complementary approaches in the search for biomarkers because some analytical techniques might be impaired by sample composition, presentation, or processing. Key Words: Planetary exploration-Life detection-Microbial mat-Life detector chip-Thermogravimetry-Raman spectroscopy-NIR-DRIFTS. Astrobiology 17, 984-996.

  14. Critical Assessment of Analytical Techniques in the Search for Biomarkers on Mars: A Mummified Microbial Mat from Antarctica as a Best-Case Scenario

    Science.gov (United States)

    Blanco, Yolanda; Gallardo-Carreño, Ignacio; Ruiz-Bermejo, Marta; Puente-Sánchez, Fernando; Cavalcante-Silva, Erika; Quesada, Antonio; Prieto-Ballesteros, Olga; Parro, Víctor

    2017-10-01

    The search for biomarkers of present or past life is one of the major challenges for in situ planetary exploration. Multiple constraints limit the performance and sensitivity of remote in situ instrumentation. In addition, the structure, chemical, and mineralogical composition of the sample may complicate the analysis and interpretation of the results. The aim of this work is to highlight the main constraints, performance, and complementarity of several techniques that have already been implemented or are planned to be implemented on Mars for detection of organic and molecular biomarkers on a best-case sample scenario. We analyzed a 1000-year-old desiccated and mummified microbial mat from Antarctica by Raman and IR (infrared) spectroscopies (near- and mid-IR), thermogravimetry (TG), differential thermal analysis, mass spectrometry (MS), and immunological detection with a life detector chip. In spite of the high organic content (ca. 20% wt/wt) of the sample, the Raman spectra only showed the characteristic spectral peaks of the remaining beta-carotene biomarker and faint peaks of phyllosilicates over a strong fluorescence background. IR spectra complemented the mineralogical information from Raman spectra and showed the main molecular vibrations of the humic acid functional groups. The TG-MS system showed the release of several volatile compounds attributed to biopolymers. An antibody microarray for detecting cyanobacteria (CYANOCHIP) detected biomarkers from Chroococcales, Nostocales, and Oscillatoriales orders. The results highlight limitations of each technique and suggest the necessity of complementary approaches in the search for biomarkers because some analytical techniques might be impaired by sample composition, presentation, or processing.

  15. Non-destructive micro-analytical differentiation of copper pigments in paint layers of works of art using laboratory-based techniques.

    Science.gov (United States)

    Svarcová, Silvie; Cermáková, Zdeňka; Hradilová, Janka; Bezdička, Petr; Hradil, David

    2014-11-11

    An unambiguous identification of pigments in paint layers of works of art forms a substantial part of the description of a painting technique, which is essential for the evaluation of the work of art including determination of the period and/or region of its creation as well as its attribution to a workshop or an author. Copper pigments represent a significant group of materials used in historic paintings. Because of their substantial diversity and, on the other hand, similarity, their identification and differentiation is a challenging task. An analytical procedure for unambiguous determination of both mineral-type (azurite, malachite, posnjakite, atacamite, etc.) and verdigris-type (copper acetates) copper pigments in the paint layers is presented, including light microscopy under VIS and UV light, electron microscopy with elemental microanalysis, Fourier transformed infrared micro-spectroscopy (micro-FTIR), and X-ray powder micro-diffraction (micro-XRD). Micro-Raman measurements were largely hindered by fluorescence. The choice of the analytical methods meets the contemporary requirement of a detailed description of various components in heterogeneous and minute samples of paint layers without their destruction. It is beneficial to use the combination of phase sensitive methods such as micro-FTIR and micro-XRD, because it allows the identification of both mineral-type and verdigris-type copper pigments in one paint layer. In addition, preliminary results concerning the study of the loss of crystallinity of verdigris-type pigments in proteinaceous binding media and the effect of lead white and lead tin yellow as highly absorbing matrix on verdigris identification in paint layers are reported. Copyright © 2014 Elsevier B.V. All rights reserved.

  16. Quality control and quality assurance of nuclear analytical techniques. Thematic planning of QC/QA in technical co-operations. Report of the external participants

    International Nuclear Information System (INIS)

    Innes, R.W.; Bode, P.; Brickenkamp, C.S.; Casa, A.; Abdul Khalik Haji Wood

    1998-02-01

    In areas of trade, health, safety, and environmental protection users of a laboratory's analytical results, for example by governments and private institutions, are increasingly requiring demonstrable proof of the reliability and credibility of the laboratory's analytical results using internationally accepted standards. This is so that the products and the decisions based on these laboratory results will be accepted in the respective national and international communities. These requirements are being imposed, for example by the European Community and others, for products to be imported and can be a significant barrier to trade, especially for developing nations. In addition to this there is a growing need for these laboratories to operate efficiently and effectively to reduce internal waste, to provide reports on time in an economical manner and to become self supporting. The need for change is global and this proposal is for the Agency to pursue a thematic plan for the implementation of quality assurance as partners in development with the selected laboratories using nuclear analytical techniques. This report describes a model project for this thematic approach to confirm the models immediate benefits as well as facilitating long-term sustainability of member states' laboratories. The model is thematic in that it is also applicable to all other projects for which the credibility and reliability of the results of a laboratory's processes and results must be demonstrated. This model project provides a cost effective approach for protecting the Agency's investment in these laboratories and strengthening the ability of these national institutions to define, organize, and manage the application of nuclear technology in their respective countries. This pilot project consists of (1) determining the general levels of knowledge and application of quality assurance principles (as delineated in ISO Guide 25) in the responding laboratories; (2) selecting a trail group of

  17. Analytical techniques for biopharmaceutical development

    National Research Council Canada - National Science Library

    Wehr, Tim; Rodríguez-Díaz, Roberto; Tuck, Stephen (Stephen F.)

    2005-01-01

    ... for biopharmaceutical development / Tim Wehr, Roberto RodriguezDiaz, Stephen Tuck, editors. p. ; cm. Includes bibliographical references and index. ISBN 0-8247-2667-7 (alk. paper) 1. Protein drugs--Analysis--Laboratory manuals. [DNLM: 1. Pharmaceutical Preparations--analysis--Laboratory Manuals. 2. Biopharmaceutics--methods--Laboratory Ma...

  18. Surface-specific analytical techniques

    International Nuclear Information System (INIS)

    Riviere, J.C.

    1982-01-01

    The following methods are discussed: electron excitation (Auger electron spectroscopy; scanning Auger microscopy; electron energy-loss spectroscopy; appearance potential spectroscopy; electron-induced luminescence; electron-stimulated desorption); photon excitation (X-ray photoelectron spectroscopy; X-ray excited Auger electron spectroscopy; synchrotron radiation photoelectron spectroscopy; ultraviolet photoelectron spectroscopy; photoelectron spectromicroscopy; ellipsometry); ion excitation (ion-excited Auger electron spectroscopy; proton-excited Auger electron spectroscopy; ion neutralization spectroscopy; ion beam spectrochemical analysis; glow discharge optical spectroscopy; static secondary ion mass spectrometry; ion scattering spectroscopy; glow discharge mass spectrometry); resolution and sensitivity. (U.K.)

  19. Noise-immune cavity-enhanced analytical atomic spectrometry - NICE-AAS - A technique for detection of elements down to zeptogram amounts

    Science.gov (United States)

    Axner, Ove; Ehlers, Patrick; Hausmaninger, Thomas; Silander, Isak; Ma, Weiguang

    2014-10-01

    Noise-immune cavity-enhanced optical heterodyne molecular spectroscopy (NICE-OHMS) is a powerful technique for detection of molecular compounds in gas phase that is based on a combination of two important concepts: frequency modulation spectroscopy (FMS) for reduction of noise, and cavity enhancement, for prolongation of the interaction length between the light and the sample. Due to its unique properties, it has demonstrated unparalleled detection sensitivity when it comes to detection of molecular constituents in the gas phase. However, despite these, it has so far not been used for detection of atoms, i.e. for elemental analysis. The present work presents an assessment of the expected performance of Doppler-broadened (Db) NICE-OHMS for analytical atomic spectrometry, then referred to as noise-immune cavity-enhanced analytical atomic spectrometry (NICE-AAS). After a description of the basic principles of Db-NICE-OHMS, the modulation and detection conditions for optimum performance are identified. Based on a previous demonstrated detection sensitivity of Db-NICE-OHMS of 5 × 10- 12 cm- 1 Hz- 1/2 (corresponding to a single-pass absorbance of 7 × 10- 11 over 10 s), the expected limits of detection (LODs) of Hg and Na by NICE-AAS are estimated. Hg is assumed to be detected in gas phase directly while Na is considered to be atomized in a graphite furnace (GF) prior to detection. It is shown that in the absence of spectral interferences, contaminated sample compartments, and optical saturation, it should be feasible to detect Hg down to 10 zg/cm3 (10 fg/m3 or 10- 5 ng/m3), which corresponds to 25 atoms/cm3, and Na down to 0.5 zg (zg = zeptogram = 10- 21 g), representing 50 zg/mL (parts-per-sextillion, pps, 1:1021) in liquid solution (assuming a sample of 10 μL) or solely 15 atoms injected into the GF, respectively. These LODs are several orders of magnitude lower (better) than any previous laser-based absorption technique previously demonstrated under atmospheric

  20. New development on materials and techniques used in the heraldic designs of illuminated Manueline foral charters by multi-analytical methods

    International Nuclear Information System (INIS)

    Le Gac, A.; Pessanha, S.; Longelin, S.; Guerra, M.; Frade, J.C.; Lourenço, F.; Serrano, M.C.; Manso, M.; Carvalho, M.L.

    2013-01-01

    In the illuminated foral charters commissioned by D. Manuel I, King of Portugal (1495–1521), heraldry played a prominent role. In this work, royal emblems corresponding to the third heraldic design, applied to the Charter of Couto de Teixedo, are studied by means of EDXRF, SEM–EDS, micro-Raman, micro-FTIR and HPLC–DAD to characterize the materials and techniques used to produce this masterpiece of Portuguese Renaissance. By comparing this data with the results previously obtained in other three charters, this research allows for the first time an accurate insight into the reformed manuscripts production, especially since the illuminated charters under consideration were all investigated on the basis of similar micro-spectroscopic techniques. Inks, metal coatings, pigments, organic dyes, fillers or extenders, and binding media are discussed, and their use enlightened by the politic and legal messages the foral charters had to convey. Parchment analysis allowed us to identify the animal species, and all undertaken processes along its preparation. HPLC–DAD allowed us to differentiate the gums used. CaSO 4 was observed in the parchment as a degradation product of CaCO 3 used in parchment production in the presence of metal sulfates coming from the ink. Pigments used in the different colors as well as some specific phases for some colors were identified. Silvering and gilding processes, metal caratage and silver oxidation compounds were also objects of the present study. - Highlights: • Complementary analytical techniques using portable XRF and molecular techniques were used for the complete characterization of Portuguese illuminated manuscripts. • A comparison between four Manueline foral charters was undertaken, providing an accurate insight into their heraldic designs and production. • Inks, pigments and some of their specific phases, organic dyes, fillers or extenders, and binding media are discussed. • Silvering and gilding processes, metal caratage

  1. PEMILIHAN STRATEGI PEMASARAN DI KAMPOENG KOPI BANARAN MENGGUNAKAN PENDEKATAN METODE ANALYTICAL NETWORK PROCESS (ANP DAN TECHNIQUE FOR ORDER PREFERENCE BY SIMILARITY TO AN IDEAL SOLUTION (TOPSIS

    Directory of Open Access Journals (Sweden)

    Aries Susanty

    2014-09-01

    untuk pemasaran Kampoeng Kopi Banaran adalah Strategi Segmentasi   Kata Kunci : strategi pemasaran; kampoeng kopi banaran; analytical network process (ANP; TOPSIS Abstract Kampoeng Kopi Banaran can’t achieve a return in accordance with the targets set. Hypothesized, this is the case because of the increasing number of competitors with similar business, such as Cimory, Kampoeng Rawa, Tlogo Plantation, Salib Putih, and Umbul Sidomukti and have not had a proper marketing strategy by Kampoeng Kopi Banaran. During this time, Kampoeng Kopi Banaran has been promote its products by using the website, brochures, and word of mouth. According to this condition, this study aimed to identify the appropriate criteria and sub-criteria for the formulation of a marketing strategy for Kampoeng Kopi Banaran, determine the weight of each criteria and sub-criteria, as well as proposing specific marketing strategies based on the criteria and sub-criteria. In this study, there are eight criteria used as a basis to develop a marketing strategy for Kampoeng Kopi Banaran, namely Managerial Capabilities (MC, Market Innovation Capabilities (MIC, Customer Linking Capabilities (CLC, Human Resource Assetes (HRA, Reputational assets (RA, Competition (C, Economy (E, and Social and cultural (SC. Meanwhile, the eight criterias will be further elaborated into a number of sub-criterias. The method is used to calculate weights of criteria and sub-criteria was Analytical Network Process (ANP whereas the method is used for the preparation of a marketing strategy was Technique for Others Reference by Similarity to Ideal Solution (TOPSIS. Data for this study were obtain by distributing questionnaires for managers and marketing section at Kampoeng Kopi Banaran. The results of data was processing show that the criteria with the highest weight in the marketing strategy for the preparation at Kampoeng Kopi Banaran is Managerial Capabilities (MC (0.1897 and sub-criteria with the highest weight is brand or

  2. Effect of soil contamination due to wastewater irrigation on total cesium as determined by destructive and nondestructive analytical techniques in some soils of egypt

    International Nuclear Information System (INIS)

    Abdel-Sabour, M.F.; Abdel-Lattif, A.

    2005-01-01

    Fifteen soil samples were chosen from different locations to represent different soils irrigated with different sources of contaminated wastewater (sewage and industrial effluent). Sequential extraction experiment was carried out to determine different forms of Cs in soils. Moreover, Soil samples were analyzed for total Cs using two analytical methods i.e. destructive wet digestion technique (Atomic Absorption Spectrometry, AAS or by summation of all sequential extracted fractions, SUM) and non-destructive technique (Neutron Activation Analysis, NAA). The aim of this study was to evaluate soil total Cs-forms (especially, bio-available fraction) as affected by soil pollution. Cesium was mostly concentrated in the residual fraction, and its values ranged from 57.4% to 82.9 % of total Cs in sandy soils and from 31.5% to 64.5 % of total Cs in tested clayey soil. Then organically bound Cs- fraction followed by Cs-occluded in Fe-Mn fraction, carbonate, exchangeable and water soluble fractions. Results suggested that, Cs level is affected by soil organic matter content, Fe-Mn oxides and clay content. The mobile Cs fraction (the sum of soluble and exchangeable fractions) ranged from 2% up to 9.9 % of total Cs in sandy soils. However, a higher value (9.82% to 15.31 %) could be observed in case of the tested clayey soils. Soils D and E were more contaminated than other tested soils. Data show obviously, that soil contaminated due to the irrigation with either sewage effluent or industrial wastewater has resulted in a drastic increase in both metal-organic and occluded in Fe and Mn oxide fractions followed by the carbonate fraction

  3. Kinetic study and application of analytical techniques in the obtention of TeO2 for the production of 131 I

    International Nuclear Information System (INIS)

    Plata D, G.

    2006-01-01

    The objectives of this investigation work were: A) To synthesize TeO 2 starting from the reaction among the Te and HNO 3 with a superior yield to 90% b) To determine the good temperature of obtaining of the TeO 2 at laboratory level, c) To determine those constant of reaction kinetics, for each one of the tests carried out to different temperatures, and the activation energy of the reaction, d) To characterize the produced TeO 2 , e) To check the viability of using the obtained TeO 2 as raw matter in the production of 131 I in order to contribute to the technological development of our country inside the radioisotope production area. The production process of TeO 2 consists primarily of seven phases: 1) Preparing and assembly of the production equipment of TeO 2 , 2) Oxidation reaction of tellurium, 3) Drying and elimination of sludges of TeO 2 , 4) Sintering of TeO 2 , 5) Characterization of the TeO 2 by means of analytical techniques, 6) Irradiation of the TeO 2 , 7) Quality control. The present document has five chapters, which allow the reader to follow the development of this work to achieve the objectives and to contrast with the hypothesis of the work. (Author)

  4. Delineation of groundwater potential zones in the Comoro watershed, Timor Leste using GIS, remote sensing and analytic hierarchy process (AHP) technique

    Science.gov (United States)

    Pinto, Domingos; Shrestha, Sangam; Babel, Mukand S.; Ninsawat, Sarawut

    2017-03-01

    Groundwater plays an important role for socio-economic development of Comoro watershed in Timor Leste. Despite the significance of groundwater for sustainable development, it has not always been properly managed in the watershed. Therefore, this study seeks to identify groundwater potential zones in the Comoro watershed, using geographical information systems and remote sensing and analytic hierarchy process technique. The groundwater potential zones thus obtained were divided into five classes and validated with the recorded bore well yield data. It was found that the alluvial plain in the northwest along the Comoro River has very high groundwater potential zone which covers about 5.4 % (13.5 km2) area of the watershed. The high groundwater potential zone was found in the eastern part and along the foothills and covers about 4.8 % (12 km2) of the area; moderate zone covers about 2.0 % (5 km2) of the area and found in the higher elevation of the alluvial plain. The poor and very poor groundwater potential zone covers about 87.8 % (219.5 km2) of the watershed. The hilly terrain located in the southern and central parts of the study area has a poor groundwater potential zone due to higher degree of slope and low permeability of conglomerate soil type. The demarcation of groundwater potential zones in the Comoro watershed will be helpful for future planning, development and management of the groundwater resources.

  5. Analytical techniques for the determination of tryptamines and β-carbolines in plant matrices and in psychoactive beverages consumed during religious ceremonies and neo-shamanic urban practices.

    Science.gov (United States)

    Gaujac, Alain; Navickiene, Sandro; Collins, Mark I; Brandt, Simon D; de Andrade, Jailson Bittencourt

    2012-01-01

    The consumption of ayahuasca, a hallucinogenic beverage used by indigenous communities in the Amazon, is increasing worldwide due to the expansion of syncretic religions founded in the north of Brazil in the first half of the twentieth century, such as Santo Daime and União do Vegetal. Another example is the jurema wine, a drink that originated from indigenous cultures of the northeast of Brazil. It is currently used for several religious practices throughout Brazil involving urban neo-shamanic rituals and syncretic Brazilian religions, such as Catimbó and Umbanda. Both plant products contain N,N-dimethyltryptamine which requires co-administration of naturally occurring monoamine oxidase inhibitors, for example β-carboline derivatives, in order to induce its psychoactive effects in humans. This review explores the cultural use of tryptamines and β-carbolines and focuses on the analytical techniques that have been recently applied to the determination of these compounds in ayahuasca, its analogues, and the plants used during the preparation of these beverages. Copyright © 2012 John Wiley & Sons, Ltd.

  6. An in situ spatially resolved analytical technique to simultaneously probe gas phase reactions and temperature within the packed bed of a plug flow reactor.

    Science.gov (United States)

    Touitou, Jamal; Burch, Robbie; Hardacre, Christopher; McManus, Colin; Morgan, Kevin; Sá, Jacinto; Goguet, Alexandre

    2013-05-21

    This paper reports the detailed description and validation of a fully automated, computer controlled analytical method to spatially probe the gas composition and thermal characteristics in packed bed systems. As an exemplar, we have examined a heterogeneously catalysed gas phase reaction within the bed of a powdered oxide supported metal catalyst. The design of the gas sampling and the temperature recording systems are disclosed. A stationary capillary with holes drilled in its wall and a moveable reactor coupled with a mass spectrometer are used to enable sampling and analysis. This method has been designed to limit the invasiveness of the probe on the reactor by using the smallest combination of thermocouple and capillary which can be employed practically. An 80 μm (O.D.) thermocouple has been inserted in a 250 μm (O.D.) capillary. The thermocouple is aligned with the sampling holes to enable both the gas composition and temperature profiles to be simultaneously measured at equivalent spatially resolved positions. This analysis technique has been validated by studying CO oxidation over a 1% Pt/Al2O3 catalyst and the spatial resolution profiles of chemical species concentrations and temperature as a function of the axial position within the catalyst bed are reported.

  7. Chemometrics in analytical spectroscopy

    National Research Council Canada - National Science Library

    Adams, Mike J

    1995-01-01

    This book provides students and practising analysts with a tutorial guide to the use and application of the more commonly encountered techniques used in processing and interpreting analytical spectroscopic data...

  8. Elemental compositions of sediments at Haiphong harbour area as determined by nuclear analytical techniques application in sediment transport studies and conservation of the environment

    International Nuclear Information System (INIS)

    Hien, P.D.; Hai, P.S.; Quang, N.H.; Chuong, P.N.; Xuang, N.N.

    1992-01-01

    Nuclear analytical techniques were applied to determine the elemental compositions of suspended and bottom sediments, collected at different sites in Haiphong harbor area (North Viet nam). The study was aimed at: 1/Understanding the origin of the sediment filling up the access channel and causing large expenditures for dredging operations. 2/Determining the background concentrations of trace elements in sediment. This would allow to detect in the future any pollution caused by the discharge of industrial wastes in the water due to the growing industrialization of the area. 3/Identifying the elements, which can be served as activatable tracers in sediment transport studies. The results obtained for the concentrations of nearly 30 elements show rather similar elemental compositions, reflecting a common origin of the sediments taken from different locations in the harbour area. The results could not allow to identify the pathway of the sediment transported to and deposited on the bottom of the access channel. Meanwhile, a considerable difference was found in the elemental compositions of the sediment and the soil taken at the nearby to the channel island bank. This would definitely exclude any hypothesis on the interrelationship between the sediment on the bottom of the channel with the soil abraded from the island. Among the tracer elements with concentrations in sediment at the ppm level, indium and selenium have been selected as the most suitable activatable tracers. Experiments on tracer preparation are in progress and some preliminary results have been obtained. The analysis also provides the background levels of the elements-pollutants, on the basis of which any industrial pollution in the future could be revealed.(Authors)(1 Table)

  9. State of practice and emerging application of analytical techniques of nuclear forensic analysis: highlights from the 4th Collaborative Materials Exercise of the Nuclear Forensics International Technical Working Group (ITWG)

    International Nuclear Information System (INIS)

    Schwantes, J.M.; Pellegrini, K.L.; Marsden, Oliva

    2017-01-01

    The Nuclear Forensics International Technical Working Group (ITWG) recently completed its fourth Collaborative Materials Exercise (CMX-4) in the 21 year history of the Group. This was also the largest materials exercise to date, with participating laboratories from 16 countries or international organizations. Exercise samples (including three separate samples of low enriched uranium oxide) were shipped as part of an illicit trafficking scenario, for which each laboratory was asked to conduct nuclear forensic analyses in support of a fictitious criminal investigation. In all, over 30 analytical techniques were applied to characterize exercise materials, for which ten of those techniques were applied to ITWG exercises for the first time. An objective review of the state of practice and emerging application of analytical techniques of nuclear forensic analysis based upon the outcome of this most recent exercise is provided. (author)

  10. New analytical technique for establishing the quality of Soil Organic Matter affected by a wildfire. A first approach using Fourier transform ion cyclotron resonance mass spectrometry

    Science.gov (United States)

    Jiménez-Morillo, Nicasio T.; González-Pérez, José A.; Waggoner, Derek C.; Almendros, Gonzalo; González-Vila, Francisco J.; Hatcher, Patrick G.

    2016-04-01

    Introduction: Fire is one of the most important modulator factors of the environment and the forest. It is able to induce chemical and biological shifts and these, in turn, can alter the physical properties of soil. Generally, fire affects the most reactive fraction, soil organic matter (SOM) (González-Pérez et al., 2004) resulting in changes to several soil properties and functions. To study changes in SOM following a wildfire, researchers can count on several traditional as well as new analytical techniques. One of the most recently employed techniques is Fourier transform ion cyclotron resonance mass spectrometry (FT-ICR-MS). This new powerful ultra-high resolution mass spectral technique, together with graphic interpretation tools such as van Krevelen diagrams (Kim et al, 2003), may be used to shed light on alterations caused by the burning of SOM. The objective of this research is to study fire impacts on SOM, using a sandy soil collected under a Cork oak (Quercus suber) in Doñana National Park, Southwest Spain. that was affected by a wildfire in August 2012. Methods: The impact of fire on SOM was studied in various different sieve fractions (coarse, 1-2 mm, and fine, operating in negative ion mode). The ESI voltages were optimized for each sample, and all spectra were internally calibrated following the procedure of (Sleighter and Hatcher, 2007), after which, peaks were assigned unique molecular formulas using a MatLab script written in house by Dr. Wassim Obeid of Old Dominion University. Results: The van Krevelen diagrams together with the relative intensity of each chemical compound, both obtained by FT-ICR-MS, allowed us to assess SOM quality for each sample and size fractions. The chemical compounds were grouped into the 7 main families; condensed aromatic compounds, unspecific aromatics, tannins, lignin, lipids, protein and carbohydrate derived. The unburnt SOM in the coarse fraction was mainly composed of compounds with a high intensity in the

  11. Analytical quality, performance indices and laboratory service

    DEFF Research Database (Denmark)

    Hilden, Jørgen; Magid, Erik

    1999-01-01

    analytical error, bias, cost effectiveness, decision-making, laboratory techniques and procedures, mass screening, models, statistical, quality control......analytical error, bias, cost effectiveness, decision-making, laboratory techniques and procedures, mass screening, models, statistical, quality control...

  12. Characterization dosimetry of applicators Valencia using different techniques; Caracterizacion dosimetrica de los aplicadores Valencia mediante diferentes tecnicas

    Energy Technology Data Exchange (ETDEWEB)

    Ferrer Garcia, C.; Huertas, C.; Huerga Cabrerizo, C.; Corredoira Silva, E.; Serrada Hierro, A.

    2013-07-01

    Valencia applicators, connected to a charging system deferred micro Selectron-HDR (Elekta-Nucletron), are used for treating small skin lesions, being an alternative to treatments with electron beams or orthovoltage equipment of X ray. These applicators are a modification of Leipzig applicators, consisting of a flatter filter, which flattens the dose distribution in the area of treatment [1,2]. In the present study are considered applicators with diameters of 2 and 3 cm (VH2 and ht5), with the parallel to the treatment area source. Due to the electronic pollution on the walls of the applicator, treatments are performed with a plastic cap. In this study are commissions Valencia applicators, checking the various options proposed in the literature. (Author)

  13. Study of the analytic quality in the determinations of Cr, Fe, Mn, Cu, Zn, Pb and Hg through conventional and nuclear analytical techniques in mosses of the MATV; Estudio de la calidad analitica en las determinaciones de Cr, Fe, Mn, Cu, Zn, Pb y Hg a traves de tecnicas analiticas nucleares y convencionales en musgos de la ZMVT

    Energy Technology Data Exchange (ETDEWEB)

    Caballero S, B.

    2013-07-01

    To evaluate the environmental risks of air pollution and to facilitate the decision-making for control, is necessary to have the capacity to generate data with analytical quality. A comparison between nuclear (Neutron activation analysis and total reflection X-ray fluorescence spectrometry) and no nuclear analytical techniques (atomic absorption spectrometry and inductively coupled plasma optical emission spectrometry) for simultaneous determination of metal content (Cr, Cu, Fe, Hg, Mn, Pb and Zn) in mosses from Metropolitan Area of the Toluca Valley (MATV) was performed. Epiphytic mosses (Fabriona ciliaris and Leskea angustata) were sampled in two campaigns, 16 sites (urban, transition and natural) and were prepared for each technique. The biological certified reference materials were used for the quality control and to evaluate accuracy, precision, linearity, detection and quantification limits. Results show that nuclear analytical techniques and no nuclear applied in chemical analysis of Cr, Cu, Fe, Hg, Mn, Pb and Zn in moss from MATV are comparable and therefore all of these can potentially be used for this purpose. However, if its considered both, the performance parameters and economic/operational characteristics is widely recommended inductively coupled plasma optical emission spectrometry, conventional analytical technique, which showed the highest analytical grade quality. Also were observed spatial and temporal variations in the concentrations of Cr, Cu, Fe, Hg, Mn, Pb and Zn in mosses from MATV and was discussed its potential origin. The urban sites had the highest concentration of anthropogenic elements as Cr, Cu, Fe, Hg, Pb and Zn because are strongly impacted by roads with high vehicle traffic. (Author)

  14. Synthesis and characterization of poly iodine anilines by plasma; Sintesis y caracterizacion de poliyodoanilinas por plasma

    Energy Technology Data Exchange (ETDEWEB)

    Enriquez P, M.A

    2003-07-01

    function of the time of reaction that is one of the variables that there is shown to be very significant to promote inter crossing and ramification in the materials synthesized by plasma. The content of this thesis work is presented in six chapters: in the Chapter 1 the generalities of the polymers are described as their classification and the different polymerization techniques, as well as some concepts on the plasma, polymerization for plasma and like it is generated. In the Chapter 2 the importance is described that has the poly aniline like semiconductor material in its pure form and doped. Also the mechanism of electric conduction that is carried out in the polymers is discussed. The Chapter 3 narrate the theoretical foundation of the analytic techniques that were used to characterize to the synthesized polymers. Also, the experimental arrangement is explained that was used in the measurement of the electric conductivity of the polymers. In the Chapter 4 the synthesis of the polymers is described which includes the m-iodine aniline synthesis and m-chloroaniline for plasma and the chemical conditions under which were carried out the syntheses. The results that they were obtained when characterizing the polymers for: measurement of thickness, scanning electron microscopy, infrared spectroscopy, X-ray diffraction, thermogravimetry and electric conductivity are presented in the Chapter 5 of this work. At the end the conclusions of this work are presented. (Author)

  15. Analytical chemistry

    Czech Academy of Sciences Publication Activity Database

    Křivánková, Ludmila

    -, č. 22 (2011), s. 718-719 ISSN 1472-3395 Institutional research plan: CEZ:AV0Z40310501 Keywords : analytical chemistry * analytical methods * nanotechnologies Subject RIV: CB - Analytical Chemistry, Separation http://edition.pagesuite-professional.co.uk/launch.aspx?referral=other&pnum=&refresh=M0j83N1cQa91&EID=82bccec1-b05f-46f9-b085-701afc238b42&skip=

  16. Analytic trigonometry

    CERN Document Server

    Bruce, William J; Maxwell, E A; Sneddon, I N

    1963-01-01

    Analytic Trigonometry details the fundamental concepts and underlying principle of analytic geometry. The title aims to address the shortcomings in the instruction of trigonometry by considering basic theories of learning and pedagogy. The text first covers the essential elements from elementary algebra, plane geometry, and analytic geometry. Next, the selection tackles the trigonometric functions of angles in general, basic identities, and solutions of equations. The text also deals with the trigonometric functions of real numbers. The fifth chapter details the inverse trigonometric functions

  17. Analytical Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Analytical Labspecializes in Oil and Hydraulic Fluid Analysis, Identification of Unknown Materials, Engineering Investigations, Qualification Testing (to support...

  18. The need of alkalinity determination in the characterization of rain; Necesidad de la determinacion de la alcalinidad en la caracterizacion de la lluvia

    Energy Technology Data Exchange (ETDEWEB)

    Pal Verma, Mahendra [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

    1998-01-01

    In this paper is presented the alkalinity determination of the carbonic species in the rain waters by the Gran titration method. The alkalinity values obtained by this method in low electric conductivity waters are fairly reliable. Also, the existing studies on the characterization of acid rains, are discussed. [Espanol] En este trabajo se presenta la medicion de la alcalinidad y la determinacion de las especies carbonicas en las aguas de lluvia por el metodo de la titulacion de Gran. Los valores de alcalinidad obtenidos por este metodo en las aguas de baja conductividad electrica son bastante confiables. Asimismo, se discuten los estudios existentes sobre la caracterizacion de la lluvia acida en la republica mexicana.

  19. Analytic geometry

    CERN Document Server

    Burdette, A C

    1971-01-01

    Analytic Geometry covers several fundamental aspects of analytic geometry needed for advanced subjects, including calculus.This book is composed of 12 chapters that review the principles, concepts, and analytic proofs of geometric theorems, families of lines, the normal equation of the line, and related matters. Other chapters highlight the application of graphing, foci, directrices, eccentricity, and conic-related topics. The remaining chapters deal with the concept polar and rectangular coordinates, surfaces and curves, and planes.This book will prove useful to undergraduate trigonometric st

  20. Determination of total iron in iron ore by x-ray fluorescence analysis using the Compton effect: comparison with others analytical techniques

    International Nuclear Information System (INIS)

    Castilho, M.V. de; Oliveira, R.C.

    1991-01-01

    Total iron in iron ores is determines by X-ray fluorescence analysis method using the compton effect. The Bragg angle is determined for compton no-coherent scattering related to K alpha of Rhodium. This measurement procedure can be used for best fitting of analytical results in X-ray fluorescence, when compared with others methods used for results corrections. (M.V.M.)

  1. Olive oil authentication: A comparative analysis of regulatory frameworks with especial emphasis on quality and authenticity indices, and recent analytical techniques developed for their assessment. A review.

    Science.gov (United States)

    Bajoub, Aadil; Bendini, Alessandra; Fernández-Gutiérrez, Alberto; Carrasco-Pancorbo, Alegría

    2018-03-24

    Over the last decades, olive oil quality and authenticity control has become an issue of great importance to consumers, suppliers, retailers, and regulators in both traditional and emerging olive oil producing countries, mainly due to the increasing worldwide popularity and the trade globalization of this product. Thus, in order to ensure olive oil authentication, various national and international laws and regulations have been adopted, although some of them are actually causing an enormous debate about the risk that they can represent for the harmonization of international olive oil trade standards. Within this context, this review was designed to provide a critical overview and comparative analysis of selected regulatory frameworks for olive oil authentication, with special emphasis on the quality and purity criteria considered by these regulation systems, their thresholds and the analytical methods employed for monitoring them. To complete the general overview, recent analytical advances to overcome drawbacks and limitations of the official methods to evaluate olive oil quality and to determine possible adulterations were reviewed. Furthermore, the latest trends on analytical approaches to assess the olive oil geographical and varietal origin traceability were also examined.

  2. Optimization of instrumental neutron activation analysis method by means of 2k experimental design technique aiming the validation of analytical procedures

    International Nuclear Information System (INIS)

    Petroni, Robson; Moreira, Edson G.

    2013-01-01

    In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) methods were carried out for the determination of the elements arsenic, chromium, cobalt, iron, rubidium, scandium, selenium and zinc in biological materials. The aim is to validate the analytical methods for future accreditation at the National Institute of Metrology, Quality and Technology (INMETRO). The 2 k experimental design was applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. Samples of Mussel Tissue Certified Reference Material and multi-element standards were analyzed considering the following variables: sample decay time, counting time and sample distance to detector. The standard multi-element concentration (comparator standard), mass of the sample and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN - CNEN/SP). Optimized conditions were estimated based on the results of z-score tests, main effect and interaction effects. The results obtained with the different experimental configurations were evaluated for accuracy (precision and trueness) for each measurement. (author)

  3. X-ray fluorescence in Member States (Spain): Main activities related to the use of XRF techniques at the Analytical and Environmental Chemistry Research Group of the University of Girona (UdG)

    International Nuclear Information System (INIS)

    Marguí, Eva; Hidalgo, Manuela

    2014-01-01

    The Analytical and Environmental Chemistry Group (QAA) is a consolidated research group of the Department of Chemistry of the University of Girona (North- East Spain). The main research topics of the group are related to the development and application of analytical methodologies for the determination of inorganic and organic species in different kind of environmental, clinical and industrial samples. From the beginning of the 2000’s, one of the research focuses of the group, is the use of X-ray fluorescence spectrometry (XRF) for the determination of trace amounts of metals and metalloids mostly in samples related to the environmental and industrial fields. For instance, in collaboration with the Institute of Earth Sciences “Jaume Almera” (ICTJA-CSIC, Spain), we have developed and successfully applied several analytical approaches based on the use of EDXRF (Energy dispersive XRF), WDXRF (Wavelength dispersive XRF) and PEDXRF (Polarised EDXRF) for the determination of metals at trace levels in complex liquid samples such as sea water or electroplating waters in vegetation samples collected around mining environments or in active pharmaceutical ingredients. At present, the evaluation of the analytical possibilities of TXRF (Total reflection XRF) in the chemical analysis field is also one of the research topics of QAA. In this sense, several contributions related to the use of this technique for element determination in liquid and solid samples have been developed. A summary of these contributions is summarized in the last section of this review

  4. On complex functions analyticity

    CERN Document Server

    Karavashkin, S B

    2002-01-01

    We analyse here the conventional definitions of analyticity and differentiability of functions of complex variable. We reveal the possibility to extend the conditions of analyticity and differentiability to the functions implementing the non-conformal mapping. On this basis we formulate more general definitions of analyticity and differentiability covering those conventional. We present some examples of such functions. By the example of a horizontal belt on a plane Z mapped non-conformally onto a crater-like harmonic vortex, we study the pattern of trajectory variation of a body motion in such field in case of field power function varying in time. We present the technique to solve the problems of such type with the help of dynamical functions of complex variable implementing the analytical non-conformal mapping

  5. Co-ordinated research project on assessment of levels and health-effects of airborne particulate matter in mining, metal refining and metal working industries using nuclear and related analytical techniques. Report on the second research co-ordination meeting

    International Nuclear Information System (INIS)

    2000-01-01

    Overall objectives: To demonstrate the applicability of nuclear and related techniques in studies that may impact on human health, giving emphasis to the solution of problems that have been identified to be of high priority in national and international programmes for sustainable development. Specific objectives: To develop strategies and techniques for sampling of workplace airborne particulate matter (APM) and of human tissues and body fluids (hair, blood, etc.) of exposed and non-exposed persons; To development suitable analytical procedures for analysis of such types of samples, using nuclear and related analytical techniques; To carry out workplace and personal monitoring of APM and characterise the health effects of such exposure in terms of the observed elemental concentration; To carry out tissue analyses of the workers so exposed for biological monitoring and the health effects studies. Achievements: a) Specific industries not previously monitored in individual countries have been targeted in respect of pollution assessment. Some examples are: Stainless steel processing and construction; Galvanising industry; Zinc smelting operations; Mineral fertiliser industry. b) Validation of analytical techniques through quality control exercises: NAT-3 Interlaboratory comparison for the determination of trace and minor elements in urban dust artificially loaded on air filters; NAT-4 Proficiency test on selected trace elements in lyophilised urine and air filters. c) Capacity building through the establishment of new multidisciplinary teams, personnel training and laboratory expertise. d) The sampling procedures have been harmonised through: The application of the ''Gent'' sampler for APM collection, IAEA procedures and IUPAC guidelines for sampling and sample handling of hair, blood and urine. e) All participants performed surveys on targeted industries and selected pollutants. f) The scientific output of the CRP is materialised in various national and international

  6. Physical characterization of drug:polymer dispersion behavior in polyethylene glycol 4000 solid dispersions using a suite of complementary analytical techniques.

    Science.gov (United States)

    Vasa, Dipy M; Dalal, Namita; Katz, Jeffrey M; Roopwani, Rahul; Nevrekar, Akshata; Patel, Harshil; Buckner, Ira S; Wildfong, Peter L D

    2014-09-01

    Fifteen model drugs were quenched from 3:1 (w/w) mixtures with polyethylene glycol 4000 (PEG4000). The resulting solids were characterized using powder X-ray diffraction (PXRD), analysis of pair distribution function-transformed PXRD data (where appropriate), hot-stage polarized light microscopy, and differential scanning calorimetry (DSC). Drug/polymer dispersion behavior was classified using the data from each technique, independent of the others, and limitations to single-method characterization of PEG-based systems are highlighted. The data from all characterization techniques were collectively used to classify dispersion behavior, which was compared with single-technique characterization. Of the 15 combinations, only six resulted in solids whose dispersion behavior was consistently described using each standalone technique. The other nine were misclassified using at least one standalone technique, mainly because the phase behavior was ambiguously interpreted when only the data from one technique were considered. The data indicated that a suite of complementary techniques provided better classifications of the phase behavior. Of all the quenched solids, only cimetidine was fully dispersed in PEG4000, suggesting that it solidified from a completely miscible mixture of molten drug and polymer that did not phase separate upon cooling. In contrast, ibuprofen and PEG4000 completely recrystallized during preparation, whereas the remaining 13 drugs were partially dispersed in PEG4000 at this composition. © 2014 Wiley Periodicals, Inc. and the American Pharmacists Association.

  7. PEMILIHAN STRATEGI PEMASARAN PADA PT. NYONYA MENEER DENGAN MENGGUNAKAN PENDEKATAN METODE ANALYTICAL NETWORK PROCESS (ANP DAN TECHNIQUE FOR ORDER PREFERENCE BY SIMILARITY TO AN IDEAL SOLUTION (TOPSIS

    Directory of Open Access Journals (Sweden)

    Ary Arvianto

    2014-01-01

    Full Text Available Dalam mencapai suatu keunggulan kompetitif, suatu perusahaan membutuhkan suatu strategi pemasaran untuk membedakan dan memiliki nilai yang berbeda dari kompetitornya. Karena krusialnya peran strategi pemasaran dalam kelangsungan perusahaan, pihak manajemen akan mengalami kesulitan dalam memilih strategi pemasaran terbaik dari pilihan strategi yang ada. PT. Nyonya Meneer memproduksi banyak jenis produk, salah satu jenis produk unggulannya adalah produk jamu untuk wanita. Penjualan produk jamu wanita tidak menunjukkan peningkatan yang sesuai dengan target, bahkan cenderung stagnan. Kondisi ini menunjukkan bahwa strategi pemasaran yang selama ini diterapkan belum memberikan hasil yang maksimal karena tidak tercapainya target penjualan yang ada. Oleh karena itu, perlu adanya suatu pemilihan strategi pemasaran PT. Nyonya Meneer dengan melihat kriteria-kriteria yang mempengaruhi dalam proses pemilihan strategi pemasaran dengan menggunakan metode Analytical Network Process (ANP dan TOPSIS. Alternatif strategi pemasaran pada penelitian ini berdasarkan strategi generik Porter. Hasil dari penelitian ini adalah bahwa strategi terpilih bagi PT. Nyonya Meneer adalah strategi segmentasi. Segmen yang direkomendasikan adalah wanita remaja hingga dewasa dengan pendapatan menengah dan menengah ke atas. Kata Kunci : analytical network process (ANP, pemilihan strategi pemasaran, strategi generik porter, TOPSIS Abstract In achieving competitive advantage, a company need a marketing strategy in order to differentiate from its competitor. A marketing strategy decision making is essential for marketing strategist to determine the most appropriate marketing strategy in effecient manner. PT. Nyonya Meneer is one of the biggest company that produce jamu in Indonesia. Jamu for women is the most popular product of PT. Nyonya Meneer. Sales of jamu for women does not show desirable increase, even tend to stagnan. It indicates  that current marketing strategy does not give

  8. The SIFT and FALP techniques; applications to ionic and electronic reactions studies and their evolution to the SIFT-MS and FA-MS analytical methods

    Czech Academy of Sciences Publication Activity Database

    Smith, D.; Španěl, Patrik

    2015-01-01

    Roč. 377, SI (2015), s. 467-478 ISSN 1387-3806 Institutional support: RVO:61388955 Keywords : flow tubes * mass spectrometry * FALP techniques Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.183, year: 2015

  9. Co-ordinated research project on use of nuclear and related analytical techniques in studying human health impacts of toxic elements consumed through foodstuffs contaminated by industrial activities. Report on the first research co-ordination meeting

    International Nuclear Information System (INIS)

    2003-01-01

    The overall objective of the Co-ordinated research project is to provide a scientific basis for better assessment of selected pollutants in the food chain with a view to elucidating their impacts on human health and nutrition. Results of this study will enhance the existing body of knowledge and can be used to develop preventive strategies. Specific objectve: To determine the extent to which toxic element levels in food are affected by surrounding industrial activities and to assess potential human exposure from the consumption of such foodstuffs. EXPECTED RESEARCH OUTPUTS (RESULTS): Harmonized protocols and procedures for sampling and analyses; ? Compiled results for toxic element levels and their average daily dietary intake (ADDI) / dietary intake; Evaluated toxic element exposure levels based on biological indicators (where applicable); Publications of the study results in an IAEA TECDOC, and in peer-reviewed journals by participants. ACTION PLAN (ACTIVITIES) a. Core research activities: 1 Identification of the study areas and population groups. 2 Collection of information on food consumption patterns of the population groups under study (e.g. through questionnaires). 3 Development of harmonized protocols and validation of analytical methodologies in compliance with ISO/IEC 17025. 4 Collection and analysis of food samples, and estimation of the dietary intake. 5 Collection and analysis of biological indicators where applicable. 6 Evaluation of possible relationships between human exposures and biological indicators for the pollutants studied. 4b. Supplementary activities: ? Speciation studies of pollutants. ? Comparison of present and previous data on relevant parameters. ? Possible production and distribution of laboratory intercomparison samples. 7. Recommendations for nuclear analytical techniques ? Nuclear analytical technique (NAT) such as INAA, PIXE, PIGE, XRF should be the primary technique of analysis; Instrumental neutron activation analysis (INAA

  10. Analytical quadrics

    CERN Document Server

    Spain, Barry; Ulam, S; Stark, M

    1960-01-01

    Analytical Quadrics focuses on the analytical geometry of three dimensions. The book first discusses the theory of the plane, sphere, cone, cylinder, straight line, and central quadrics in their standard forms. The idea of the plane at infinity is introduced through the homogenous Cartesian coordinates and applied to the nature of the intersection of three planes and to the circular sections of quadrics. The text also focuses on paraboloid, including polar properties, center of a section, axes of plane section, and generators of hyperbolic paraboloid. The book also touches on homogenous coordi

  11. Achievements and experiences in the 'TC Regional Project on Quality Control and Quality Assurance for Nuclear Analytical Techniques RER/2/004' obtained in the fields of radionuclide and trace element analysis

    International Nuclear Information System (INIS)

    Vajda, N.; Molnar, Zs.; Bodizs, D.; Balla, M.

    2002-01-01

    The Radiochemical Laboratory participated in the 2-year-long TC Project on Quality Control and Quality Assurance for Nuclear Analytical Techniques RER/2/004 organized by the IAEA during the period June 1999 and September 2001. Motivations, major goals of participation in the project, cornerstones of implementation of the project, establishing the quality system, improvements fulfilling both technical and management requirements as well as major achievements for future activities of the laboratory with respect to technical and financial conditions are discussed in detail. (author)

  12. ENVIRONMENTAL ANALYTICAL CHEMISTRY OF ...

    Science.gov (United States)

    Within the scope of a number of emerging contaminant issues in environmental analysis, one area that has received a great deal of public interest has been the assessment of the role of pharmaceuticals and personal care products (PPCPs) as stressors and agents of change in ecosystems as well as their role in unplanned human exposure. The relationship between personal actions and the occurrence of PPCPs in the environment is clear-cut and comprehensible to the public. In this overview, we attempt to examine the separations aspect of the analytical approach to the vast array of potential analytes among this class of compounds. We also highlight the relationship between these compounds and endocrine disrupting compounds (EDCs) and between PPCPs and EDCs and the more traditional environmental analytes such as the persistent organic pollutants (POPs). Although the spectrum of chemical behavior extends from hydrophobic to hydrophilic, the current focus has shifted to moderately and highly polar analytes. Thus, emphasis on HPLC and LC/MS has grown and MS/MS has become a detection technique of choice with either electrospray ionization or atmospheric pressure chemical ionization. This contrasts markedly with the bench mark approach of capillary GC, GC/MS and electron ionization in traditional environmental analysis. The expansion of the analyte list has fostered new vigor in the development of environmental analytical chemistry, modernized the range of tools appli

  13. analysis of some human-daily - used products and studying the correlation between elemental content and possible health harm using chemical and nuclear analytical techniques

    International Nuclear Information System (INIS)

    Abo-Zahra, S.F.

    2005-01-01

    radiochemical and chemical techniques have been used for analysis of some human-daily-used products. these techniques were: instrumental neutron activation analysis (INAA), and inductively coupled plasma mass spectrometry (ICP-MS). the first technique was used for simultaneously multi-element determination of some trace, minor, and major elements in the analyzed samples, whereas icp-ms was used for analysis of Cd,Cu,Hg, and Pb in some samples. in the present study samples of various products as indicated below were analyzed: 1- samples of various kinds of cosmetic products such as : compact face powder, compact rouge make-up, compact eyeshadow, 2-samples of some common drugs. 3- samples of different kinds of toothpaste, and shaving cream. 4- samples of some mosquitoes exterminators. these samples have been randomly selected from the egyptian market. some of these samples were imported from the world market, and the others were manufactured in Egypt

  14. Analytics for Cyber Network Defense

    Energy Technology Data Exchange (ETDEWEB)

    Plantenga, Todd. [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Kolda, Tamara Gibson [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

    2011-06-01

    This report provides a brief survey of analytics tools considered relevant to cyber network defense (CND). Ideas and tools come from elds such as statistics, data mining, and knowledge discovery. Some analytics are considered standard mathematical or statistical techniques, while others re ect current research directions. In all cases the report attempts to explain the relevance to CND with brief examples.

  15. Analytic number theory

    CERN Document Server

    Iwaniec, Henryk

    2004-01-01

    Analytic Number Theory distinguishes itself by the variety of tools it uses to establish results, many of which belong to the mainstream of arithmetic. One of the main attractions of analytic number theory is the vast diversity of concepts and methods it includes. The main goal of the book is to show the scope of the theory, both in classical and modern directions, and to exhibit its wealth and prospects, its beautiful theorems and powerful techniques. The book is written with graduate students in mind, and the authors tried to balance between clarity, completeness, and generality. The exercis

  16. Determination of dynamic metal complexes and their diffusion coefficients in the presence of different humic substances by combining two analytical techniques.

    Digital Repository Service at National Institute of Oceanography (India)

    Chakraborty, P.; Manek, A; Niyogi, S.; Hudson, J.

    The combined use of a competing ligand exchange (CLE) method and a diffusive gradient in thin films (DGT) technique in a quasi-labile system provides a better understanding of dynamic metal (Cu and Ni) complexes in the presence of humic substances...

  17. FEASIBILITY OF INVESTMENT IN BUSINESS ANALYTICS

    OpenAIRE

    Mladen Varga; Miljenko Vuković

    2007-01-01

    Trends in data processing for decision support show that business users need business analytics, i.e. analytical applications which incorporate a variety of business oriented data analysis techniques and task-specific knowledge. The paper discusses the feasibility of investment in two models of implementing business analytics: custom development and packed analytical applications. The consequences of both models are shown on two models of business analytics implementation in Croatia.

  18. Click Analytics: Visualizing Website Use Data

    OpenAIRE

    Tabatha A. Farney

    2011-01-01

    Click analytics is a powerful technique that displays what and where users are clicking on a webpage helping libraries to easily identify areas of high and low usage on a page without having to decipher website use data sets. Click analytics is a subset of web analytics, but there is little research that discusses its potential uses for libraries. This paper introduces three click analytics tools, Google Analytics’ In-Page Analytics, ClickHeat, and Crazy Egg, and evaluates their usefulness in...

  19. FEASIBILITY OF INVESTMENT IN BUSINESS ANALYTICS

    Directory of Open Access Journals (Sweden)

    Mladen Varga

    2007-12-01

    Full Text Available Trends in data processing for decision support show that business users need business analytics, i.e. analytical applications which incorporate a variety of business oriented data analysis techniques and task-specific knowledge. The paper discusses the feasibility of investment in two models of implementing business analytics: custom development and packed analytical applications. The consequences of both models are shown on two models of business analytics implementation in Croatia.

  20. Green analytical chemistry--theory and practice.

    Science.gov (United States)

    Tobiszewski, Marek; Mechlińska, Agata; Namieśnik, Jacek

    2010-08-01

    This tutorial review summarises the current state of green analytical chemistry with special emphasis on environmentally friendly sample preparation techniques. Green analytical chemistry is a part of the sustainable development concept; its history and origins are described. Miniaturisation of analytical devices and shortening the time elapsing between performing analysis and obtaining reliable analytical results are important aspects of green analytical chemistry. Solventless extraction techniques, the application of alternative solvents and assisted extractions are considered to be the main approaches complying with green analytical chemistry principles.

  1. [The Raman Spectroscopy (RS): A new tool for the analytical quality control of injectable in health settings. Comparison of RS technique versus HPLC and UV/Vis-FTIR, applied to anthracyclines as anticancer drugs].

    Science.gov (United States)

    Bourget, P; Amin, A; Moriceau, A; Cassard, B; Vidal, F; Clement, R

    2012-12-01

    The study compares the performances of three analytical methods devoted to Analytical Quality Control (AQC) of therapeutic solutions formed into care environment, we are talking about Therapeutics Objects(TN) (TOs(TN)). We explored the pharmacological model of two widely used anthracyclines i.e. adriamycin and epirubicin. We compared the performance of the HPLC versus two vibrational spectroscopic techniques: a tandem UV/Vis-FTIR on one hand and Raman Spectroscopy (RS) on the other. The three methods give good results for the key criteria of repeatability, of reproducibility and, of accuracy. A Spearman and a Kendall correlation test confirms the noninferiority of the vibrational techniques as an alternative to the reference method (HPLC). The selection of bands for characterization and quantification by RS is the results of a gradual process adjustment, at the intercept of matrix effects. From the perspective of a AQC associated to release of TOs, RS displays various advantages: (a) to decide quickly (~2min), simultaneously and without intrusion or withdrawal on both the nature of a packaging than on a solvant and this, regardless of the compound of interest; it is the founder asset of the method, (b) to explore qualitatively and quantitatively any kinds of TOs, (c) operator safety is guaranteed during production and in the laboratory, (d) the suppression of analytical releases or waste contribute to protects the environment, (e) the suppression.of consumables, (f) a negligible costs of maintenance, (g) a small budget of technicians training. These results already show that the SR technology is potentially a strong contributor to the safety of the medication cycle and fight against the iatrogenic effects of drugs. Copyright © 2011 Elsevier Masson SAS. All rights reserved.

  2. Report of the first research co-ordination meeting on the co-ordinated research programme: Development and selection of analytical techniques for measuring accidentally released radionuclides in environment

    International Nuclear Information System (INIS)

    2001-01-01

    The participants at the second Research Co-ordination Meeting (Vienna, 12-16 August 1991) of the CRP on 'Rapid Instrumental and Separation Methods for Monitoring Radionuclides in Food and Environmental Samples', recommended that a new CRP be established. The current CRP on 'Development and Selection of Analytical Techniques and Procedures for Measuring Accidentally Released Radionuclides in Environment' was established based on this recommendation. The objectives of this CRP are to conduct research and development on applicable methodologies for response to accidental releases, and to improve and maintain the capabilities of the network of laboratories and provide training of individuals within member states. Thus, the CRP serves as a vehicle to maintain contact within the network of laboratories, while developing and transferring analytical techniques and procedures for measuring accidentally released radioactivity. The purpose of the Research Co-ordination Meeting is to discuss the proposed research programs, the status to date and the work planned for the duration of the CRP. The meeting also provides the opportunity for the CRP participants to exchange ideas and possibly develop collaborations in their research. The members of the CRP also need to discuss issues related to the previous CRP on Rapid methods. These include: the preparation of the final report of the previous CRP, the preparation of an addendum to TRS-295 and the ultimate revision or updating of TRS-295. Finally, it is intended that the members of the CRP should discuss the mandate and scope of work of the network of analytical laboratories and the steps needed to firmly establish this network

  3. [Application of the technique of analytical structure of project for the sub-project of websites catalog of the Virtual Health Library-Nursing].

    Science.gov (United States)

    dos, Santos Luís Augusto; Marin, Heimar de Fátima; Marques, Isaac Rosa; Cunha, Isabel Cristina Kowal Olm

    2007-01-01

    This work intents, in a didactic form, to explain the benefits of use of a technique of project management, named Work Breakdown Structure: a graphical tool to identify the main results to be developed in a project. The real examples are applied to a sub-project of the Virtual Library in Health in Nursing (BVS-Enfermagem) to development of the Sites Catalogs. The benefits of graphical visualization for a major agreement between professionals of different expertise are presented.

  4. Analytical characterization of the palette and painting techniques of Jorge Afonso, the great 16th century Master of Lisbon painting workshop

    Science.gov (United States)

    Antunes, Vanessa; Candeias, António; Mirão, José; Carvalho, Maria L.; Dias, Cristina Barrocas; Manhita, Ana; Cardoso, Ana; Francisco, Maria J.; Lauw, Alexandra; Manso, Marta

    2018-03-01

    In this work, a study on a set of paintings from the most significant altarpiece assigned to Master Jorge Afonso (c. 1470-1540) painting workshop is presented. This altarpiece is composed by fourteen paintings made to the church of Convento de Jesus, in Setúbal, Portugal, and was made circa 1517-19/1530, according to art-history. This set of paintings is compared to one of the other most important Portuguese altarpieces from the 16th century: the panels of the Round Church of the Convento de Cristo, in Tomar, made circa 1510-1515. The aim of this study is to characterize the wooden support, pigments, ground layers materials and technique used in Jorge Afonso workshop by means of complementary analyses. A dendrochronological approach was made in order to corroborate (or not) the historical date initially assigned. Infrared photography (IRP) and reflectography (IRR) allowed the study of the underdrawing technique and macro photography (MP) was used to recognize overlapping layers technique. Cross-sections from the paintings were examined by optical microscopy (OM), and analyzed by μ-X-ray diffraction (μ-XRD), Energy Dispersive X-ray Fluorescence spectroscopy (EDXRF), Scanning Electron Microscopy with Energy Dispersive X-ray Spectroscopy (SEM-EDS), micro-Raman spectroscopy (μ-Raman), micro-Fourier Transform Infrared spectroscopy (μ-FTIR), Pyrolysis Gas Chromatography Mass Spectrometry (py-GC/MS). The characterization of the palette and ground layers and the study of the overlapping of paint layers brought a new insight of the adopted painting techniques by the most important group of painters working in Portugal in the 16th century - the Lisbon workshop, leaded by Master Jorge Afonso.

  5. A high-throughput 2D-analytical technique to obtain single protein parameters from complex cell lysates for in silico process development of ion exchange chromatography.

    Science.gov (United States)

    Kröner, Frieder; Elsäßer, Dennis; Hubbuch, Jürgen

    2013-11-29

    The accelerating growth of the market for biopharmaceutical proteins, the market entry of biosimilars and the growing interest in new, more complex molecules constantly pose new challenges for bioseparation process development. In the presented work we demonstrate the application of a multidimensional, analytical separation approach to obtain the relevant physicochemical parameters of single proteins in a complex mixture for in silico chromatographic process development. A complete cell lysate containing a low titre target protein was first fractionated by multiple linear salt gradient anion exchange chromatography (AEC) with varying gradient length. The collected fractions were subsequently analysed by high-throughput capillary gel electrophoresis (HT-CGE) after being desalted and concentrated. From the obtained data of the 2D-separation the retention-volumes and the concentration of the single proteins were determined. The retention-volumes of the single proteins were used to calculate the related steric-mass action model parameters. In a final evaluation experiment the received parameters were successfully applied to predict the retention behaviour of the single proteins in salt gradient AEC. Copyright © 2013 Elsevier B.V. All rights reserved.

  6. Combination of Fuzzy Logic and Analytical Hierarchy Process Techniques to Assess Potassium Saturation Percentage of Some Calcareous Soils (Case Study: Fars Province, Southern Iran

    Directory of Open Access Journals (Sweden)

    Marzieh Mokarram

    2016-12-01

    Full Text Available This research was carried out to evaluate the capability of a combined fuzzy logic-based approach and analytical hierarchy process (AHP for potassium saturation percentage (KSP estimation in some calcareous soils of southern Iran. Based on a reconnaissance soil survey, 52 soil series were selected and different physical and chemical properties were determined. Five soil parameters including clay, cation exchange capacity, calcium carbonate equivalent, electrical conductivity, and organic carbon were chosen for analysis. Mapping was developed with the kriging method for each parameter. Different fuzzy membership functions were employed and weights for all parameters were calculated according to AHP. Finally, KSP classes were provided for each land unit. Results indicated that about 60% of the studied area is classified as having moderate to high KSP content (>3% and 40% of had low or very low KSP content (<3%. Then 15 sample points were used for determination of the accuracy of the fuzzy method. Results showed that the fuzzy and AHP methods have a high accuracy for KSP estimation in the studied soils. Further development of the fuzzy and AHP methods would be worthwhile for improving the accuracy of KSP analysis.

  7. Changes in the nature of dissolved organics during pulp and paper mill wastewater treatment: a multivariate statistical study combining data from three analytical techniques.

    Science.gov (United States)

    Plant, Emma L; Smernik, Ronald J; van Leeuwen, John; Greenwood, Paul; Macdonald, Lynne M

    2014-03-01

    The paper-making process can produce large amounts of wastewater (WW) with high particulate and dissolved organic loads. Generally, in developed countries, stringent international regulations for environmental protection require pulp and paper mill WW to be treated to reduce the organic load prior to discharge into the receiving environment. This can be achieved by primary and secondary treatments involving both chemical and biological processes. These processes result in complex changes in the nature of the organic material, as some components are mineralised and others are transformed. In this study, changes in the nature of organics through different stages of secondary treatment of pulp and paper mill WW were followed using three advanced characterisation techniques: solid-state (13)C nuclear magnetic resonance (NMR) spectroscopy, pyrolysis-gas chromatography mass spectrometry (py-GCMS) and high-performance size-exclusion chromatography (HPSEC). Each technique provided a different perspective on the changes that occurred. To compare the different chemical perspectives in terms of the degree of similarity/difference between samples, we employed non-metric multidimensional scaling. Results indicate that NMR and HPSEC provided strongly correlated perspectives, with 86 % of the discrimination between the organic samples common to both techniques. Conversely, py-GCMS was found to provide a unique, and thus complementary, perspective.

  8. Advances in analytical chemistry

    Science.gov (United States)

    Arendale, W. F.; Congo, Richard T.; Nielsen, Bruce J.

    1991-01-01

    Implementation of computer programs based on multivariate statistical algorithms makes possible obtaining reliable information from long data vectors that contain large amounts of extraneous information, for example, noise and/or analytes that we do not wish to control. Three examples are described. Each of these applications requires the use of techniques characteristic of modern analytical chemistry. The first example, using a quantitative or analytical model, describes the determination of the acid dissociation constant for 2,2'-pyridyl thiophene using archived data. The second example describes an investigation to determine the active biocidal species of iodine in aqueous solutions. The third example is taken from a research program directed toward advanced fiber-optic chemical sensors. The second and third examples require heuristic or empirical models.

  9. Nanoparticulas basadas en complejos de Fe(II) con transicion de espin: sintesis, caracterizacion y aplicaciones en electronica molecular

    Science.gov (United States)

    Monrabal Capilla, Maria

    Esta tesis doctoral esta organizada en 5 capitulos y esta destinada al estudio de sistemas de Fe (II) que presentan el fenomeno de la transicion de espin a escala nanometrica. El capitulo 1 contiene una introduccion general sobre materiales moleculares multifuncionales, destacando aquellos ejemplos mas importantes. Por otro lado, se explicara el fenomeno de la transicion de espin, tratando aspectos conceptuales, los antecedentes mas importantes y la situacion actual. En el capitulo 2 se describen los diferentes procesos existentes para la obtencion de diferentes tipos de nanoparticulas. Ademas, se presenta la sintesis y caracterizacion de nanoparticulas del polimero de coordinacion unidimensional [Fe(Htrz)2(trz)]BF4, obtenidas mediante el metodo de micelas inversas. Estas nanoparticulas, con una estrecha distribucion de tamanos centrada alrededor de los 11 nm, presentan una transicion de espin muy abrupta, con un ancho ciclo de histeresis termica de unos 40K. En el capitulo 3 se describe el proceso de modificacion del tamano de las nanoparticulas descritas en el capitulo anterior, llevado a cabo variando la proporcion de surfactante/H2O en el medio. Ademas, con el objetivo de modificar las propiedades magneticas de las nanoparticulas obtenidas en el capitulo 2, se lleva a cabo la sintesis de nanoparticulas de polimeros de la misma familia del [Fe(Htrz)2(trz)]BF4. En concreto se sintetizaron 3 nuevos tipos de nanoparticulas basadas en el polimero [Fe(Htrz)1-x(NH2trz)x](ClO4)2, siendo x = 0.05, 0.15 y 0.3, en cada caso. Estas nanoparticulas siguen presentando una estrecha distribucion de tamanos y una transicion de espin muy abrupta y con un ancho ciclo de histeresis. Ademas, se observa que este ciclo se desplaza a temperaturas mas proximas a la temperatura ambiente a medida que se aumenta el porcentaje de 4-amino-1, 2, 4- triazol en la muestra. Pero al mismo tiempo se produce una disminucion de la anchura de este ciclo. Por ultimo, en este capitulo se presenta la

  10. Analytical chemistry

    International Nuclear Information System (INIS)

    Choi, Jae Seong

    1993-02-01

    This book is comprised of nineteen chapters, which describes introduction of analytical chemistry, experimental error and statistics, chemistry equilibrium and solubility, gravimetric analysis with mechanism of precipitation, range and calculation of the result, volume analysis on general principle, sedimentation method on types and titration curve, acid base balance, acid base titration curve, complex and firing reaction, introduction of chemical electro analysis, acid-base titration curve, electrode and potentiometry, electrolysis and conductometry, voltammetry and polarographic spectrophotometry, atomic spectrometry, solvent extraction, chromatograph and experiments.

  11. Análisis y Visualización de Big Data mediante técnicas de realidad virtual = Big Data Visual Analytics using virtual reality techniques

    Directory of Open Access Journals (Sweden)

    Laura Raya

    2014-12-01

    Full Text Available Gracias a los avances de la tecnología, el número de datos que son generados y su complejidad crece exponencialmente. Las nuevas técnicas de adquisición de datos, así como las técnicas de computación de altas prestaciones han posibilitado la gestión de grandes conjuntos de datos con mayor resolución. Sin embargo, nuestra capacidad en el incremento de cantidad y complejidad en la generación de datos actuales, supera nuestra habilidad para entenderlos fácilmente y darles sentido. En el presente trabajo, proponemos el uso de técnicas de realidad virtual que exploten los diferentes canales sensoriales para facilitar la visualización, análisis, interpretación e interacción de grandes conjuntos de datos complejos. Abstract Advances in technology have made it possible to increase the data size generated causing its complexity grows exponentially. New data acquisition and high performance computing techniques have enabled to manage large data sets with high resolution. However, the amount and complexity of current generation of data exceeds our ability to easily understand and make sense of them. In this paper, we propose the use of virtual reality techniques that exploit different sensory channels for improving the visualization, analysis, interpretation and interaction of large complex datasets.

  12. Analytical investigation of Mudéjar polychrome on the carpentry in the Casa de Pilatos palace in Seville using non-destructive XRF and complementary techniques.

    Science.gov (United States)

    Garrote, M A; Robador, M D; Perez-Rodriguez, J L

    2017-02-15

    The pigments, execution technique and repainting used on the polychrome wood ceilings and doors in the Casa de Pilatos (Seville, Spain) were studied using portable X-ray fluorescence equipment. Cross-sections of small samples were also analysed by optical microscopy, SEM with EDX analysis, micro-Raman and micro-infrared spectroscopy and X-ray diffraction. These carpentry works are magnificent examples of the Mudéjar art made in Spain in the early 16th century. Portable X-ray fluorescence gave good information on the different components of the polychrome. The SEM-EDX study of the surfaces of small samples gave information on their components and also characterized the compounds that had been deposited or formed by environmental contamination or by the alteration of some pigments. The SEM-EDX study of cross-sections facilitated the characterization of all layers and pigments from the support to the most external layer. The following pigments were characterized: red (cinnabar/vermillion, lead oxide, iron oxides and orpiment/realgar), black (carbon black), white (white lead and titanium barium white), yellow-orange-red-brown (orpiment/realgar and iron oxides), green (chromium oxide), blue (indigo blue and ultramarine blue), and gilding (gold leaf on bole). False gold, bronze and brass were also found. The pigments were applied with the oil painting technique over a support layer that had been primed with animal glue. This support layer was gypsum in some cases and white lead in others. This study is essential to the polychrome conservation of the studied artwork, and it will help clarify uncertainties in the history and painting of Mudéjar art. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Video Analytics

    DEFF Research Database (Denmark)

    Nasrollahi, Kamal; Distante, Cosimo; Hua, Gang

    2017-01-01

    This book collects the papers presented at two workshops during the 23rd International Conference on Pattern Recognition (ICPR): the Third Workshop on Video Analytics for Audience Measurement (VAAM) and the Second International Workshop on Face and Facial Expression Recognition (FFER) from Real...... World Videos. The workshops were run on December 4, 2016, in Cancun in Mexico. The two workshops together received 13 papers. Each paper was then reviewed by at least two expert reviewers in the field. In all, 11 papers were accepted to be presented at the workshops. The topics covered in the papers...

  14. Video Analytics

    DEFF Research Database (Denmark)

    This book collects the papers presented at two workshops during the 23rd International Conference on Pattern Recognition (ICPR): the Third Workshop on Video Analytics for Audience Measurement (VAAM) and the Second International Workshop on Face and Facial Expression Recognition (FFER) from Real...... World Videos. The workshops were run on December 4, 2016, in Cancun in Mexico. The two workshops together received 13 papers. Each paper was then reviewed by at least two expert reviewers in the field. In all, 11 papers were accepted to be presented at the workshops. The topics covered in the papers...

  15. Mechanical characterization of materials for dental applications; Caracterizacion mecanica de materiales para aplicaciones dentales

    Energy Technology Data Exchange (ETDEWEB)

    Pajares, A.; Miranda, P.; Guiberteau, F.; Cumbrera, F. I.

    2001-07-01

    An study of the damage induced in dental materials and model multilayer systems by masticatory contact stresses, simulated by hertz ian indentation test, have been performed. In particular, the nature of induced damage has been identified, and quantified from stress-strain curves and critical loads for yielding or crack initiation. For multilayer systems, test have been numerically simulated using finite element techniques (FEM). FEM simulations complement indentation test, allowing to justify the observed fracture modes from calculated stress fields. Practical implications can be derived from our results, relevant to the design of multilayer structures tolerant to contact damage. (Author) 34 refs.

  16. Synthesis and characterization of porous calcium phosphate; Sintesis y caracterizacion del fosfato de calcio poroso

    Energy Technology Data Exchange (ETDEWEB)

    Granados C, F.; Serrano G, J.; Bonifacio M, J. [ININ, 52750 La Marquesa, Estado de Mexico (Mexico)]. e-mail: fgc@nuclear.inin.mx

    2007-07-01

    The porous calcium phosphate was prepared by the continuous precipitation method using Ca(NO{sub 3}){sub 2}.4H{sub 2}O and NH{sub 4}H{sub 2}PO{sub 4} salts. The synthesized material was structurally and superficially characterized using the XRD, BET, IR TGA and SEM techniques. The obtained inorganic material was identified as calcium phosphate that presents a great specific area for what can be efficiently used as adsorbent material for adsorption studies in the radioactive wastes treatment present in aqueous solution. (Author)

  17. Semiconductor Research Experimental Techniques

    CERN Document Server

    Balkan, Naci

    2012-01-01

    The book describes the fundamentals, latest developments and use of key experimental techniques for semiconductor research. It explains the application potential of various analytical methods and discusses the opportunities to apply particular analytical techniques to study novel semiconductor compounds, such as dilute nitride alloys. The emphasis is on the technique rather than on the particular system studied.

  18. Flight validated high-order models of UAV helicopter dynamics in hover and forward flight using analytical and parameter identification techniques

    Science.gov (United States)

    Bhandari, Subodh

    There has been a significant growth in the use of UAV helicopters for a multitude of military and civilian applications over the last few years. Due to these numerous applications, from crop dusting to remote sensing, UAV helicopters are now a major topic of interest within the aerospace community. The main research focus is on the development of automatic flight control systems (AFCS). The design of AFCS for these vehicles requires a mathematical model representing the dynamics of the vehicle. The mathematical model is developed either from first-principles, using the equations of motion of the vehicle, or from the flight data, using parameter identification techniques. The traditional six-degrees-of-freedom (6-DoF) dynamics model is not suitable for high-bandwidth control system design. Such models are valid only within the low- to mid-frequency range. The agility and high maneuverability of small-scale helicopters require a high-bandwidth control system for full authority autonomous performance. The design of a high-bandwidth control system in turn requires a high-fidelity simulation model that is able to capture the key dynamics of the helicopter. These dynamics include the rotor dynamics. This dissertation presents the development of a 14-degrees-of-freedom (14-DoF) state-space linear model for the KU Thunder Tiger Raptor 50 UAV helicopter from first-principles and from flight test data using a parameter identification technique for the hovering and forward flight conditions. The model includes rigid body, rotor regressive, rotor inflow, stabilizer bar, and rotor coning dynamics. The model is implemented within The MathWork's MATLAB/Simulink environment. The simulation results show that the high-order model is able to predict the helicopter's dynamics up to the frequency of 30 rad/sec. The main contributions of this dissertation are the development of a high-order simulation model for a small UAV helicopter from first-principles and the identification of a

  19. Determination of the analytical performance of a headspace capillary gas chromatographic technique and karl Fischer coulometric titration by system calibration using oil samples containing known amounts of moisture.

    Science.gov (United States)

    Jalbert, J; Gilbert, R; Tétreault, P

    1999-08-01

    Over the past few years, concerns have been raised in the literature about the accuracy of the Karl Fischer (KF) method for assessing moisture in transformer mineral oils. To better understand this issue, the performance of a static headspace capillary gas chromatographic (HS-CGC) technique was compared to that of KF coulometric titration by analyzing moisture in samples containing known amounts of water and various samples obtained from the National Institute of Standards and Technology (NIST). Two modes of adding samples into the KF vessel were used:  direct injection and indirect injection via an azeotropic distillation of the moisture with toluene. Under the conditions used for direct injection, the oil matrix was totally dissolved in the anolyte, which allowed the moisture to be titrated in a single-phase solution rather than in a suspension. The results have shown that when HS-CGC and combined azeotropic distillation/KF titration are calibrated with moisture-in-oil standards, a linear relation is observed over 0-60 ppm H(2)O with a correlation coefficient better than 0.9994 (95% confidence), with the regression line crossing through zero. A similar relation can also be observed when calibration is achieved by direct KF addition of standards prepared with octanol-1, but in this case an intercept of 4-5 ppm is noted. The amount of moisture determined by curve interpolation in NIST reference materials by the three calibrated systems ranges from 13.0 to 14.8 ppm for RM 8506 and 42.5 to 46.4 ppm for RM 8507, and in any case, the results were as high as those reported in the literature with volumetric KF titration. However, titration of various dehydrated oil and solvent samples showed that direct KF titration is affected by a small bias when samples contain very little moisture. The source of error after correction for the large sample volume used for the determination (8 mL) is about 6 ppm for Voltesso naphthenic oil and 4 ppm for toluene, revealing a matrix

  20. Characterisation of PDO olive oil Chianti Classico by non-selective (UV-visible, NIR and MIR spectroscopy) and selective (fatty acid composition) analytical techniques.

    Science.gov (United States)

    Casale, M; Oliveri, P; Casolino, C; Sinelli, N; Zunin, P; Armanino, C; Forina, M; Lanteri, S

    2012-01-27

    An authentication study of the Italian PDO (protected designation of origin) extra virgin olive oil Chianti Classico was performed; UV-visible (UV-vis), Near-Infrared (NIR) and Mid-Infrared (MIR) spectroscopies were applied to a set of samples representative of the whole Chianti Classico production area. The non-selective signals (fingerprints) provided by the three spectroscopic techniques were utilised both individually and jointly, after fusion of the respective profile vectors, in order to build a model for the Chianti Classico PDO olive oil. Moreover, these results were compared with those obtained by the gas chromatographic determination of the fatty acids composition. In order to characterise the olive oils produced in the Chianti Classico PDO area, UNEQ (unequal class models) and SIMCA (soft independent modelling of class analogy) were employed both on the MIR, NIR and UV-vis spectra, individually and jointly, and on the fatty acid composition. Finally, PLS (partial least square) regression was applied on the UV-vis, NIR and MIR spectra, in order to predict the content of oleic and linoleic acids in the extra virgin olive oils. UNEQ, SIMCA and PLS were performed after selection of the relevant predictors, in order to increase the efficiency of both classification and regression models. The non-selective information obtained from UV-vis, NIR and MIR spectroscopy allowed to build reliable models for checking the authenticity of the Italian PDO extra virgin olive oil Chianti Classico. Copyright © 2011 Elsevier B.V. All rights reserved.

  1. Review of Current Student-Monitoring Techniques used in eLearning-Focused recommender Systems and Learning analytics. The Experience API & LIME model Case Study

    Directory of Open Access Journals (Sweden)

    Alberto Corbi

    2014-09-01

    Full Text Available Recommender systems require input information in order to properly operate and deliver content or behaviour suggestions to end users. eLearning scenarios are no exception. Users are current students and recommendations can be built upon paths (both formal and informal, relationships, behaviours, friends, followers, actions, grades, tutor interaction, etc. A recommender system must somehow retrieve, categorize and work with all these details. There are several ways to do so: from raw and inelegant database access to more curated web APIs or even via HTML scrapping. New server-centric user-action logging and monitoring standard technologies have been presented in past years by several groups, organizations and standard bodies. The Experience API (xAPI, detailed in this article, is one of these. In the first part of this paper we analyse current learner-monitoring techniques as an initialization phase for eLearning recommender systems. We next review standardization efforts in this area; finally, we focus on xAPI and the potential interaction with the LIME model, which will be also summarized below.

  2. A study on environmental pollution monitoring and occupational health in the capital iron and steel company, Beijing, China, using nuclear and related analytical techniques

    International Nuclear Information System (INIS)

    Chai Chifang; Hou Xiaolin; Qian Qinfang; Ding Wenjun; Feng Xiangqian; Kuang Minxu; Wang Hongyu; Zhang Yongchen

    1998-01-01

    The atmosphere pollution in some Chinese cities is becoming more and more serious with the industrial development in the past decades. The airborne particulate concentration in Beijing, the Capital of China, far exceeds the allowable level set by the Chinese government and by the related international organizations. The main contribution source for the Beijing atmospheric particulate is the Capital Iron and Steel Company, which constitutes 55% of total air-borne particulate in Beijing. In the framework of this CRP organized by IAEA, we select this company as a target workplace. The INAA (instrumental neutron activation analysis), PIXE (proton induced X-ray emission analysis), SRXRF (synchronous radiation X-ray fluorescence spectrometry) and other related techniques will be applied to determine the concentrations of some target elements, e.g. heavy metal and toxic elements, in environmental samples (including airborne particulate, soil and plants) and human samples (including head hair, urine and blood) collected from this company, its surrounding region and a non-polluted region as a control. The activity completed at the first year and the working plan for next year is outlined in this report. Other related information will be dealt with as well. (author)

  3. Advances in analytical techniques for neutron capture therapy: thin layer chromatography matrix and track etch thin layer chromatography methods for boron-10 analysis

    International Nuclear Information System (INIS)

    Schremmer, J.M.; Noonan, D.J.

    1987-01-01

    A new track etch autoradiographic technique for quantitating boron-10 containing compounds used for neutron capture therapy is described. Instead of applying solutions of Cs2B12H11SH and its oxidation products directly to solid-state nuclear track detectors, diethylaminoethyl cellulose thin layer chromatography (TLC) plates are utilized as sample matrices. The plates are juxtaposed with Lexan polycarbonate detectors and irradiated in a beam of thermal neutrons. The detectors are then chemically etched, and the resultant tracks counted with an optoelectronic image analyzer. Sensitivity to boron-10 in solution reaches the 1 pg/microliter level, or 1 ppb. In heparinized blood samples, 100 pg boron-10/microliter are detected. This TLC matrix method has the advantage that sample plates can be reanalyzed under different reactor conditions to optimize detector response to the boron-10 carrier material. Track etch/TLC allows quantitation of the purity of boron neutron capture therapy compounds by utilizing the above method with TLC plates developed in solvent systems that resolve Cs2B12H11SH and its oxidative analogs. Detectors irradiated in juxtaposition to the thin layer chromatograms are chemically etched, and the tracks are counted in the sample lane from the origin of the plate to the solvent front. A graphic depiction of the number of tracks per field yields a quantitative analysis of compound purity

  4. Analytical solution of the multigroup neutron diffusion kinetic equation in one-dimensional cartesian geometry by the integral transform technique; Solucao analitica da equacao cinetica de difusao multigrupo de neutrons em geometria cartesiana unidimensional pela tecnica da transformada integral

    Energy Technology Data Exchange (ETDEWEB)

    Ceolin, Celina

    2010-07-01

    The objective of this work is to obtain an analytical solution of the neutron diffusion kinetic equation in one-dimensional cartesian geometry, to monoenergetic and multigroup problems. These equations are of the type stiff, due to large differences in the orders of magnitude of the time scales of the physical phenomena involved, which make them difficult to solve. The basic idea of the proposed method is applying the spectral expansion in the scalar flux and in the precursor concentration, taking moments and solving the resulting matrix problem by the Laplace transform technique. Bearing in mind that the equation for the precursor concentration is a first order linear differential equation in the time variable, to enable the application of the spectral method we introduce a fictitious diffusion term multiplied by a positive value which tends to zero. This procedure opened the possibility to find an analytical solution to the problem studied. We report numerical simulations and analysis of the results obtained with the precision controlled by the truncation order of the series. (author)

  5. Analytical Chemistry of Nitric Oxide

    Science.gov (United States)

    Hetrick, Evan M.

    2013-01-01

    Nitric oxide (NO) is the focus of intense research, owing primarily to its wide-ranging biological and physiological actions. A requirement for understanding its origin, activity, and regulation is the need for accurate and precise measurement techniques. Unfortunately, analytical assays for monitoring NO are challenged by NO’s unique chemical and physical properties, including its reactivity, rapid diffusion, and short half-life. Moreover, NO concentrations may span pM to µM in physiological milieu, requiring techniques with wide dynamic response ranges. Despite such challenges, many analytical techniques have emerged for the detection of NO. Herein, we review the most common spectroscopic and electrochemical methods, with special focus on the fundamentals behind each technique and approaches that have been coupled with modern analytical measurement tools or exploited to create novel NO sensors. PMID:20636069

  6. Analytical mechanics

    CERN Document Server

    Helrich, Carl S

    2017-01-01

    This advanced undergraduate textbook begins with the Lagrangian formulation of Analytical Mechanics and then passes directly to the Hamiltonian formulation and the canonical equations, with constraints incorporated through Lagrange multipliers. Hamilton's Principle and the canonical equations remain the basis of the remainder of the text. Topics considered for applications include small oscillations, motion in electric and magnetic fields, and rigid body dynamics. The Hamilton-Jacobi approach is developed with special attention to the canonical transformation in order to provide a smooth and logical transition into the study of complex and chaotic systems. Finally the text has a careful treatment of relativistic mechanics and the requirement of Lorentz invariance. The text is enriched with an outline of the history of mechanics, which particularly outlines the importance of the work of Euler, Lagrange, Hamilton and Jacobi. Numerous exercises with solutions support the exceptionally clear and concise treatment...

  7. Modelizacion, simulacion y caracterizacion acustica de materiales para su uso en acustica arquitectonica

    Science.gov (United States)

    Julia Sanchis, Ernesto

    The global objective of this thesis consists on evaluating the viability of applying new sound absorbent materials that attempt, on one hand, to be an alternative to those materials classically used (as mineral wools) and, on the other hand, to offer a solution to one of the most important problems: the use of waste products of the textile industries by means of the recycled. For carrying out this study, some of the parameters that allow to characterize the acoustic behaviour of sound absorbent materials (such as the acoustic impedance, the acoustic absorption coefficient and the flow resistivity, among other) have been studied. Different experimental methods used to obtain these acoustic parameters have also been described. Among the methods presented in this work, the attention has been focused in those based on the acoustic impedance tube (Kundt tube). This technique presents advantages, for example, that only a small space in the laboratory is required as well as the samples of the testing materials are of small dimensions. The study has settled on three fundamental pillars: mathematical modelization, acoustic characterization of materials and numerical simulation. In the first place, after reviewing the main models and theories used in the acoustic evaluation of the porous and fibrous sound absorbent materials, a new mathematical model has been proposed and its validity is demonstrated for the type of studied materials. With regard to the acoustic characterization, diverse campaigns of measurements have been carried out with the purpose of obtaining the acoustic absorption coefficient and the flow resistivity of different type of materials. Finally, by means of a computer program based on the finite element method, the technique of the numerical simulation has been applied with the purpose of contrasting the obtained results experimentally, as well as for the evaluation of one of the most significant industrial applications from the acoustic point of view: the

  8. Nuclear analytical chemistry

    International Nuclear Information System (INIS)

    Brune, D.; Forkman, B.; Persson, B.

    1984-01-01

    This book covers the general theories and techniques of nuclear chemical analysis, directed at applications in analytical chemistry, nuclear medicine, radiophysics, agriculture, environmental sciences, geological exploration, industrial process control, etc. The main principles of nuclear physics and nuclear detection on which the analysis is based are briefly outlined. An attempt is made to emphasise the fundamentals of activation analysis, detection and activation methods, as well as their applications. The book provides guidance in analytical chemistry, agriculture, environmental and biomedical sciences, etc. The contents include: the nuclear periodic system; nuclear decay; nuclear reactions; nuclear radiation sources; interaction of radiation with matter; principles of radiation detectors; nuclear electronics; statistical methods and spectral analysis; methods of radiation detection; neutron activation analysis; charged particle activation analysis; photon activation analysis; sample preparation and chemical separation; nuclear chemical analysis in biological and medical research; the use of nuclear chemical analysis in the field of criminology; nuclear chemical analysis in environmental sciences, geology and mineral exploration; and radiation protection

  9. Tecnicas avanzadas de medida en intensimetria acustica para la caracterizacion de materiales aislantes

    Science.gov (United States)

    Munuera Saura, Gregorio

    main advantage of the described test procedure is that it can be done in a room with normal dimensions and without specific conditioning. The vibroacoustic behaviour of the testing box and its influence on the measures is another important aspect to be considered. A test of modal analysis has been carried out with a steel plate similar to the enclosures of the box. A mathematical model based on the Statistical Energy Analysis SEA has been developed to estimate the paths of energy transmission from the sound source to the point of measurement with the sound intensity probe. The commercial software AUTOSEA2 LT is used. General conclusions regarding the alternative method of measurement and specific ones related to the capacity of insulation of the tested materials have been obtained. As for the general conclusions, the limitations of measuring with the intensity probe at low and high frequencies have been proved, validating measurements with an accuracy of 0.5 dB according to the criteria set forth in the standard UNE EN ISO 9614 Part 3 have been obtained, and a new test procedure for easy determination of the rate of acoustic reduction of an insulating material with low density surface has been established. Finally, the devised procedure allows future developments in the field of vibroacoustics, such as the application of the principle of reciprocity and the determination of acoustic impedance of materials by application of techniques for measuring of acoustics intensity.

  10. Caracterizacion de materiales magnetoelasticos y su aplicacion al control de vibraciones

    Science.gov (United States)

    Morales Robredo, Angel Luis

    The characterization and application of magnetoelastic materials to problems of vibration control is tackled in this thesis. Although this subject has been thoroughly studied since the nineteenth century, and despite the fact that this type of material is currently of topical interest due to their use as smart materials in several fields of science and engineering, there is room for further research in this field, specially in topics concerning measurement and application of DeltaE- and DeltaΨ- effects. Throughout this work, several contributions can be found. First, a new experimental system for measuring both DeltaE- and DeltaΨ- effects, simultaneously, has been developed with new or improved features. Second, this new experimental system has been used to characterize in depth the three classical ferromagnetic materials, nickel, cobalt and iron, and also Terfenol-D, a special alloy which shows a great magnetoelastic response. Third, the influence of internal stresses on both DeltaE- and DeltaΨ- effects has been studied by means of different heat treatments applied to nickel specimens. And fourth, the more suitable materials regarding their DeltaE- and DeltaΨ- effects were selected and applied to novel ways of vibration control. The results obtained in the different parts of this thesis are, in our humble opinion, very valuable. Regarding the new experimental system, the improvements endow the method with notable advantages over other techniques, such as lack of mechanical or magnetic interaction with the specimen, high accuracy and resolution in magnetic field, speed of measurement, no need for sample preparation, possibility of studying stress dependence, full automation and integration of the measurement and post-processing stages. Regarding the measurement of DeltaE- and DeltaΨ- effects, our results agree with the literature but provide better accuracy. Terfenol-D shows the highest DeltaE-effect (95%), followed at a great distance by nickel (3

  11. Caracterizacion de musculos artificiales con capacidades sensores/actuadores e intercambio mayoritario de cationes

    Science.gov (United States)

    Valero Conzuelo, Laura Luz

    film, used as a self-supported electrode, is characterized assuming the exchange of cations during its oxidation/reduction. For the electrochemical characterization of biomimetic films of polypyrrole/DBS, different electrochemical techniques are used and under different experimental conditions with the view to understanding the sensing potentialities of the material reactions. The study and electrochemical characterization of the motion of pPy/DBS//tape bilayer bending actuators corroborates that the reaction is driven by the expulsion of cations from the conducting polymer to the electrolyte during oxidation and its entrance during reduction, in the full potential range studied. The actuator is a faradaic device controlled by the electrochemical reaction driving the movement: the rate of the angular movement is a linear function (easy control of the velocity) of the applied current and the described angle by the displacement is a linear function of the consumed charge (it also provides another easy control of the displacement). The evolution of the muscle potential and that of the consumed electrical energy during the reaction senses the energetic working conditions: chemical energy (electrolyte concentration), thermal energy (working temperature) or electric energy (applied current). The polymeric motor senses, while working, environmental conditions. The sensing calibration curves were attained for the different sensors. They have been constructed and characterized triple-layer artificial muscles pPy/DBS//Tape//pPy/DBS, corroborating again the exchange of cations during the reaction, the faradic nature of the device and the ability of the device to sense, while moving, its environmental working conditions mimicking natural haptic muscles. The actuator (current and charge) and sensing (muscle potential and involved energy) signals are simultaneously present in only two connecting wires, mimicking brain-muscle intercommunication. The study of polymeric materials with

  12. Development of the double-pulse technique to improve the analytical performance of Laser Induced Breakdown Spectroscopy (LIBS) on solids: Nuclear and geological applications; Developpement de la technique de la double impulsion laser pour ameliorer les performances analytiques de l'Ablation Laser couplee a la Spectrometrie d'Emission Optique (AL/SEO) sur solides: Applications nucleaires et geologiques

    Energy Technology Data Exchange (ETDEWEB)

    Gautier, C.

    2005-10-15

    The double-pulse technique has been developed to improve the analytical performance of Laser Ablation coupled to Optical Emission Spectroscopy (LA/OES). This approach relies on the addition of a second time-resolved laser pulse to the classical LA/OES system. It has been studied on aluminium alloys according to different geometries of the two laser beams (orthogonal and collinear geometries) before being applied to different materials (synthetic glass, rock, steel, sodium chloride). The increase in emission intensity depends on the temporal parameters, on the excitation energy level of the emission line, on the concentration of the studied element and on the analyzed matrix. The double-pulse LA/OES technique can be particularly interesting to improve the sensitivity towards vitreous matrices containing elements emitting lines with high excitation energy levels. (author)

  13. Development of Analytical Techniques for Toxicokinetic Research

    Science.gov (United States)

    1979-10-01

    thioesters produce hydrazides . Hydrazines and hydra- zides react with natural aldehydes and ketones, including ketonic steroids, to produce hydrazone ...chlorobenzaldehyde acetyl- methyihydrazone. 20 15 Mass spectrum of p-chlorobenzaldehyde acetyl- hydrazone . 20 16 Mass spectrum of p-chlorobenzaldehyde...compounds. Reactions with carbonyl compounds produce hydrazones and azine. Reactions with organic acids, acid anhydrides, acid chlorides, esters, and

  14. Field Analytical Techniques for Geochemical Surveys

    OpenAIRE

    Lemière, Bruno

    2015-01-01

    International audience; Obtaining geochemical results in the field has been a persistent dream for exploration geologists in the last century, and a few practical geochemical? tests were developed, but shipping samples to faraway labs and waiting weeks for results was the rule. This remained a dream until around 1990, when technology developments of portable instruments allowed on-site measurement of the first key metals in solids. This development progressed rapidly and by 2010, most geochem...

  15. Exploiting analytics techniques in CMS computing monitoring

    Science.gov (United States)

    Bonacorsi, D.; Kuznetsov, V.; Magini, N.; Repečka, A.; Vaandering, E.

    2017-10-01

    The CMS experiment has collected an enormous volume of metadata about its computing operations in its monitoring systems, describing its experience in operating all of the CMS workflows on all of the Worldwide LHC Computing Grid Tiers. Data mining efforts into all these information have rarely been done, but are of crucial importance for a better understanding of how CMS did successful operations, and to reach an adequate and adaptive modelling of the CMS operations, in order to allow detailed optimizations and eventually a prediction of system behaviours. These data are now streamed into the CERN Hadoop data cluster for further analysis. Specific sets of information (e.g. data on how many replicas of datasets CMS wrote on disks at WLCG Tiers, data on which datasets were primarily requested for analysis, etc) were collected on Hadoop and processed with MapReduce applications profiting of the parallelization on the Hadoop cluster. We present the implementation of new monitoring applications on Hadoop, and discuss the new possibilities in CMS computing monitoring introduced with the ability to quickly process big data sets from mulltiple sources, looking forward to a predictive modeling of the system.

  16. NUCLEAR ANALYTICAL TECHNIQUES IN TANZANIA: A REVIEW

    African Journals Online (AJOL)

    user

    Energy Dispersive X-Ray fluorescence (EDXRF), Particle Induced X-Ray Emission (PIXE),. Electron probe Micro-Mass Analysis (EPMA), Neutron ... fast electron and heavy charged particles like protons and alpha (α) particles. While ..... PIXE, main features include accelerator where protons are used to excite the samples.

  17. Characterization of marine sediments using analytical techniques

    International Nuclear Information System (INIS)

    Garcia-Rosales, G.; Longoria-Gandara, L.C.

    2011-01-01

    This study deals with the characterization of a marine sediments profile from the Gulf of Tehuantepec, Mexico. Ten sediment samples obtained from a core of 18.3 m of length were analysed. Although there have been numerous marine sediments studies carried out in Mexico, more are needed to better understand the sea floor formation. Crystallographic, morphologic, physical, chemical and gamma ray activity analysis were carried out on the samples. The analysis results showed a decrease in organic matter content as a function of sea depth; this value is related to the specific surface area. Some hazardous materials as Cr, Mn, Ni, Sr and Hg were also identified by PIXE in some samples, probably due to anthropogenic activity. The presence of uranium a naturally occurring element was found in all the samples, suggesting a migration through all materials of strata, radioactive elements such as 226 Ra, 235 U, 212 Pb, 214 Pb, 228 Ac, 208 Ti, 214 Bi, 228 Ac and 40 K were detected. (author)

  18. Red mud characterization using nuclear analytical techniques

    International Nuclear Information System (INIS)

    Obhodas, J.; Sudac, D.; Matjacic, L.; Valkovic, V.

    2011-01-01

    Red mud is a toxic waste left as a byproduct in aluminum production Bayer process. Since it contains significant concentrations of other chemical elements interesting for industry, including REE, it is also potential secondary ore source. Recent events in some countries have shown that red mud presents a serious environmental hazard if not properly stored. The subject of our study is the red mud from an ex-aluminum plant in Obrovac, Croatia, left from processing of bauxite mined during late 70's and early 80's at the eastern Adriatic coast and since than stored in open concrete basins for more than 30 years. We have used energy dispersive x-ray fluorescence analysis (both tube and radioactive source excitation), fast neutron activation analysis and passive gamma spectrometry to identify a number of elements present in the red mud, their concentration levels and radioactivity in the red mud. The high concentrations of Al, Si, Ca, Ti and Fe have been measured. Chemical elements Sc, Cr, Mn, Co, Ni, Cu, Zn, Ga, As, Se, Br, Y, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Pb, Th and U were found in lower concentrations. No significant levels of radioactivity have been measured. (authors)

  19. Exploiting Analytics Techniques in CMS Computing Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Bonacorsi, D. [Bologna U.; Kuznetsov, V. [Cornell U.; Magini, N. [Fermilab; Repečka, A. [Vilnius U.; Vaandering, E. [Fermilab

    2017-11-22

    The CMS experiment has collected an enormous volume of metadata about its computing operations in its monitoring systems, describing its experience in operating all of the CMS workflows on all of the Worldwide LHC Computing Grid Tiers. Data mining efforts into all these information have rarely been done, but are of crucial importance for a better understanding of how CMS did successful operations, and to reach an adequate and adaptive modelling of the CMS operations, in order to allow detailed optimizations and eventually a prediction of system behaviours. These data are now streamed into the CERN Hadoop data cluster for further analysis. Specific sets of information (e.g. data on how many replicas of datasets CMS wrote on disks at WLCG Tiers, data on which datasets were primarily requested for analysis, etc) were collected on Hadoop and processed with MapReduce applications profiting of the parallelization on the Hadoop cluster. We present the implementation of new monitoring applications on Hadoop, and discuss the new possibilities in CMS computing monitoring introduced with the ability to quickly process big data sets from mulltiple sources, looking forward to a predictive modeling of the system.

  20. Evaluation of two semi-analytical techniques in air quality applications Avaliação de duas técnicas semi-analíticas em aplicações na qualidade do ar

    Directory of Open Access Journals (Sweden)

    Jonas C. Carvalho

    2007-04-01

    Full Text Available In this article an evaluation of two semi-analytical techniques is carried out, considering the quality and accuracy of these techniques in reproducing the ground-level concentration values of passive pollutant released from low and high sources. The first technique is an Eulerian model based on the solution of the advection-diffusion equation by the Laplace transform technique. The second is a Lagrangian model based on solution of the Langevin equation through the Picard Iterative Method. Turbulence parameters are calculated according to a parameterization capable of generating continuous values in all stability conditions and in all heights of the planetary boundary layer. Numerical simulations and comparisons show a good agreement between predicted and observed concentrations values. Comparisons between the two proposed techniques reveal that Lagrangian model generated more accurate results, but Eulerian model demands a lesser computational time.Neste artigo é realizada uma avaliação de duas técnicas semi-analíticas, considerando a qualidade e a exatidão destas técnicas em reproduzir valores de concentração ao nível da superfície de poluentes passivos emitidos a partir de fontes baixas e altas. A primeira técnica é um modelo Euleriano baseado na solução da equação advecção-difusão através da técnica de transformada de Laplace. A segunda é um modelo Lagrangiano baseado na solução da equação de Langevin através do Método Iterativo de Picard. Parâmetros da turbulência são calculados de acordo com uma parametrização capaz de gerar valores contínuos em todas as condições de estabilidade e em todas as alturas na camada limite planetária. Simulações numéricas e comparações mostram uma boa concordância entre valores de concentração previstos e observados. Comparações entre as duas técnicas revelam que o modelo Lagrangiano gera resultados mais precisos, mas o modelo Euleriano exige um menor tempo

  1. Design, construction and characterization of a rural solar furnace; Diseno, construccion y caracterizacion de un horno solar rural

    Energy Technology Data Exchange (ETDEWEB)

    Hernandez Luna, Gabriela

    2001-06-15

    centigrade, followed of the condition using 6 liters of oil, in which a maximum temperature of 115 centigrade was obtained and in the tests with 6 liters of water as load a maximum temperature of 95 centigrade was registered. In these tests the temperature of the oil surpasses 60 centigrade during an approximate period of 7 hours and is higher than 80 centigrade by a lapse of 5 hours. The water temperature is higher than 60 centigrade for a period of more than 5 hours and during 3 hours is higher than 80 centigrade. These results are satisfactory, because they assure the accomplishment of the process of baking inside the furnace. A calculation program was elaborated to implement the theoretical model of the concentration. This program reads the data of radiation intensity in the horizontal plane supplied by the weather station of the CIE and determines the incident radiation in the furnace collector. The theoretical model of the thermal behavior was implemented in another computer program; this program reads the data of the incident radiation in the collector of the furnace and the data of room temperature and calculates the temperature of the furnace as a time function. The model overestimates the temperature reached in the furnace, nevertheless reproduces qualitatively the thermal behavior of the same. In spite of the limitations of the theoretical model, this can be of utility in achieving the reproduction of the temperature of the load experimentally registered, through an effective coefficient of heat losses and an effective coefficient of heat capacity, characteristic of each one of the conditions of the test. [Spanish] Esta tesis presenta el diseno, construccion y caracterizacion de un horno solar tipo caja para su uso en comunidades rurales en la zona intertropical. El trabajo presentado en esta tesis parte del diseno opto-geometrico de un horno solar tipo caja propuesto por un entusiasta grupo de jovenes estudiantes (Acosta et al., 1996, Vazquez et al., 1998

  2. Proceedings of the BRNS-AEACI first symposium on current trends in analytical chemistry: book of abstracts

    International Nuclear Information System (INIS)

    Reddy, A.V.R.

    2015-01-01

    The symposium was very useful for the scientists on various aspects of current trends in analytical chemistry like separation science, speciation, nuclear analytical techniques, thermo analytical techniques, electro analytical techniques, spectrochemical and microscopic techniques, environmental studies, geochemical studies, chemical metrology, analytical instrumentation. Papers relevant to INIS are indexed separately

  3. CARACTERIZACION VOZ Y VIDEO

    Directory of Open Access Journals (Sweden)

    Octavio José Salcedo Parra

    2011-11-01

    Full Text Available La motivación para caracterizar el tráfico de voz y video está en la necesidad de las empresas proveedoras de servicio en mantener redes de transporte de información con capacidades acordes a los requerimientos de los usuarios.  Poder determinar en forma oportuna como los elementos técnicos que hacen parte de las redes afectan su desempeño, teniendo en cuenta que cada tipo de servicio es afectado en mayor o menor medida por dichos elementos dentro de los que tenemos el jitter, las demoras y las pérdidas de paquetes entre otros. El presente trabajo muestra varios casos de caracterización de tráfico tanto de voz como de video en las que se utilizan una diversidad de técnicas para diferentes tipos de servicio.

  4. Liquid radioactive wastes characterizing obtained of {sup 99} Mo production by fission; Caracterizacion de residuos liquidos radiactivos provenientes de la produccion de {sup 99} Mo por fision

    Energy Technology Data Exchange (ETDEWEB)

    Devida, Claudio; Bouza, Edgardo; Gil, Daniel; Neuringer, Silvia [Comision Nacional de Energia Atomica, Buenso Aires (Argentina). Centro Atomico Ezeiza. Unidad de Actividad Materiales y Combustibles Nucleares; Ramallo, Telma [Comision Nacional de Energia Atomica, Buenos Aires (Argentina). Centro Atomico Ezeiza. Unidad de Actividad gestion de Residuos Radiactivos

    1999-11-01

    Among its facilities, the National Atomic Energy Commission of Argentina has a {sup 99} Mo by Fission Production Plant, which generates, among others, low and medium activity liquid waste. The characterization of the waste aims at obtaining the array of data that is necessary to carry out the processed which lead to obtain an acceptable product for its storage and final disposal. The Analytical Chemistry Laboratory faced the development, adjustment and execution of the necessary analytical procedures to achieve the physico-chemical characterization of the main liquid waste. Given the complexity and activity of the waste, high sensitivity instrumental analytical techniques were chose and the equipment was adapted to work in radiochemical hoods. In a first stage, simulated solutions were used in order to adjust the methods and techniques and to carry out studies about interference and results statistics. Afterwards, physico-chemical analysis were performed on real waste samples yielding satisfactory results as regards precision required for this kind of waste. (author) 6 refs., 4 figs., 5 tabs.

  5. Click Analytics: Visualizing Website Use Data

    Directory of Open Access Journals (Sweden)

    Tabatha A. Farney

    2011-09-01

    Full Text Available Click analytics is a powerful technique that displays what and where users are clicking on a webpage helping libraries to easily identify areas of high and low usage on a page without having to decipher website use data sets. Click analytics is a subset of web analytics, but there is little research that discusses its potential uses for libraries. This paper introduces three click analytics tools, Google Analytics’ In-Page Analytics, ClickHeat, and Crazy Egg, and evaluates their usefulness in the context of redesigning a library’s homepage.

  6. Spatial Game Analytics and Visualization

    DEFF Research Database (Denmark)

    Drachen, Anders; Schubert, Matthias

    2013-01-01

    The recently emerged field of game analytics and the development and adaptation of business intelligence techniques to support game design and development has given data-driven techniques a direct role in game development. Given that all digital games contain some sort of spatial operation......, techniques for spatial analysis had their share in these developments. However, the methods for analyzing and visualizing spatial and spatio-temporal patterns in player behavior being used by the game industry are not as diverse as the range of techniques utilized in game research, leaving room......, and present four key areas of spatial and spatio-temporal analytics: Spatial Outlier Detection, Spatial Clustering, Spatial Predictive Models, Spatial Pattern and Rule Mining. All key areas are well-established outside the context of games and hold the potential to reshape the research roadmap in game...

  7. EVA: Visual Analytics to Identify Fraudulent Events.

    Science.gov (United States)

    Leite, Roger A; Gschwandtner, Theresia; Miksch, Silvia; Kriglstein, Simone; Pohl, Margit; Gstrein, Erich; Kuntner, Johannes

    2018-01-01

    Financial institutions are interested in ensuring security and quality for their customers. Banks, for instance, need to identify and stop harmful transactions in a timely manner. In order to detect fraudulent operations, data mining techniques and customer profile analysis are commonly used. However, these approaches are not supported by Visual Analytics techniques yet. Visual Analytics techniques have potential to considerably enhance the knowledge discovery process and increase the detection and prediction accuracy of financial fraud detection systems. Thus, we propose EVA, a Visual Analytics approach for supporting fraud investigation, fine-tuning fraud detection algorithms, and thus, reducing false positive alarms.

  8. Characterization of the volcanic eruption emissions using neutron activation analysis; Caracterizacion de las emisiones de una erupcion volcanica mediante analisis por activacion neutronica

    Energy Technology Data Exchange (ETDEWEB)

    Pla, Rita R. [Comision Nacional de Energia Atomica, Buenos Aires (Argentina). Radioquimica, Tecnicas Analiticas Nucleares; Tafuri, Victoria V. [Servicio Meteorologico Nacional, Buenos Aires (Argentina). Centro de Contaminacion del Aire

    1997-10-01

    Characterization of the volcanic particulate material has been performed by analyzing aerosols and ashes with instrumental neutron activation analysis. Crustal enrichment factors were calculated using the elemental concentration and clustering techniques, and multivariate analysis were done. The analytical and data treatment methodologies allowed the sample differentiation from their geographical origin viewpoint, based on their chemical composition patterns, which are related to the deposit formation processes, which consist of direct deposition from the volcanic cloud, and removal by wind action after the end of the eruption, and and finally the deposition. (author). 8 refs., 5 figs.

  9. Application of the Raman spectroscopy for the characterization of organic pesticides; Aplicacion de la espectroscopia Raman para la caracterizacion de pesticidas organicos

    Energy Technology Data Exchange (ETDEWEB)

    Sato B, R.Y.; Medina G, C.; Medina V, J.; Frausto R, C. [Centro de Investigaciones en Optica, A.C., Unidad Aguascalientes, Prol. Constitucion 607, Reserva Loma Bonita, C.P. 20200, Aguascalientes (Mexico)]. e-mail: rsato@foton.cio.mx

    2004-07-01

    Raman spectra of organophosphate, organo chlorine and bipyridyl pesticides are presented in this study. They have been obtained satisfactorily by the NlR-Raman spectroscopy technique. Pesticides have been analyzed in solution or as a solid in glass containers and on aluminum substrates. This analytic technique can be an alternative tool for the detection of pesticides in the agriculture, presenting advantages as be quick, not destructive and require little or no sample preparation. Moreover, samples can be analyzed through transparent containers avoiding contact with the toxic substances. The implementation of the aluminium substrate is easy and practical. Moreover, it is commercially available and does not need a previous preparation. The analysis of a mixture of two pesticides in a {beta} carotene solution is shown. (Author) 25 refs., 8 figs.

  10. Analytics for Education

    Science.gov (United States)

    MacNeill, Sheila; Campbell, Lorna M.; Hawksey, Martin

    2014-01-01

    This article presents an overview of the development and use of analytics in the context of education. Using Buckingham Shum's three levels of analytics, the authors present a critical analysis of current developments in the domain of learning analytics, and contrast the potential value of analytics research and development with real world…

  11. Analytical chemistry instrumentation

    International Nuclear Information System (INIS)

    Laing, W.R.

    1986-01-01

    Separate abstracts were prepared for 48 papers in these conference proceedings. The topics covered include: analytical chemistry and the environment; environmental radiochemistry; automated instrumentation; advances in analytical mass spectrometry; Fourier transform spectroscopy; analytical chemistry of plutonium; nuclear analytical chemistry; chemometrics; and nuclear fuel technology

  12. Analytical chemistry instrumentation

    International Nuclear Information System (INIS)

    Laing, W.R.

    1986-01-01

    In nine sections, 48 chapters cover 1) analytical chemistry and the environment 2) environmental radiochemistry 3) automated instrumentation 4) advances in analytical mass spectrometry 5) fourier transform spectroscopy 6) analytical chemistry of plutonium 7) nuclear analytical chemistry 8) chemometrics and 9) nuclear fuel technology

  13. Microgenetic Learning Analytics Methods: Workshop Report

    Science.gov (United States)

    Aghababyan, Ani; Martin, Taylor; Janisiewicz, Philip; Close, Kevin

    2016-01-01

    Learning analytics is an emerging discipline and, as such, benefits from new tools and methodological approaches. This work reviews and summarizes our workshop on microgenetic data analysis techniques using R, held at the second annual Learning Analytics Summer Institute in Cambridge, Massachusetts, on 30 June 2014. Specifically, this paper…

  14. Development of analytical procedures for the simultaneous ...

    African Journals Online (AJOL)

    The mechanical shaking extraction technique for the isolation of target analytes was optimised. Different ... Target analytes were quantified using a high capillary gas chromatograph (GC) equipped with an electron capture detector. Under the optimum GC ... and BB 153. It is efficient, moderately rapid and cost-effective.

  15. Analytic observables in nuclear physics

    International Nuclear Information System (INIS)

    Borbely, I.

    1980-05-01

    The analytical dependence of quantum mechanical observables on their variables is discussed by using the assumption that the corresponding probability amplitudes are analytic functions. The properties of the cross section in the energy plane for spinless particles as well as the properties of the most general polarization observables in the cosdelta plane are considered in detail. In particular, the strength of the transfer pole for polarization observables is given. The practical possibilities to extract the different orbital momentum components of nuclei by extrapolation techniques are briefly outlined. (author)

  16. Application of the techniques of Multivariate analysis in the characterization of germplasm of Quinua; Aplicacion de tecnicas de Analisis multivariado en la caracterizacion de germoplasma de Quinua

    Energy Technology Data Exchange (ETDEWEB)

    Garcia A, J.M.; Torres de la Cruz, E. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: jmga@nuclear.inin.mx

    2004-07-01

    Its were evaluated 20 lines of Chenopodium quinoa respect characters of agronomical interest finding that nine lines overcame the witness highlighting the lines: 20R1-41, 20R1-10, 20R2-27 that presented near yield to 1.5 ton/ha. The multivariate analysis of main components generated a dendrogram in that is appreciated that at an Euclidean distance of 0.75 its were formed seven groups according to its morphological characteristics and of yield, it highlights the formation of two big groups at a distance of 1.125, that they separate according to the radiation dose (200 and 250 Gy). (Author)

  17. Characterization of plutonium isotopes in air samples retrospectives techniques ultrasensitive; Caracterizacion de isotopos de plutonio en muestras de aire mediante tecnicas restrospectiva ultrasensibles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    This paper presents preliminary results for the determination of plutonium isotope ratios that characterize the natural background for later comparison with that obtained during the dismantling operations. In this manner can be performed retrospective analysis of radiation from the air quality.

  18. Characterization of the Novillo Tokamak in main discharge regime; Caracterizacion del Tokamak Novillo en regimen de descarga principal

    Energy Technology Data Exchange (ETDEWEB)

    Lopez C, R.; Melendez L, L.; Chavez A, E.; Colunga S, S.; Valencia A, R.; Gaytan G, E

    1992-07-15

    The analytical procedure to carry out the establishment of the discharge in a Tokamak including: a) Ionization, b) Diffusion losses, recombination, union, drift speed, spurious fields, and c) Electric field is presented. In an experimental way a procedure settles down by means of which it is characterized the plasma, specially a new characteristic discharge parameter is settled down and it is the plasma current by the duration of the (I{sub p}t) discharge. (Author)

  19. Role of analytical chemistry in environmental monitoring

    International Nuclear Information System (INIS)

    Kayasth, S.; Swain, K.

    2004-01-01

    Basic aspects of pollution and the role of analytical chemistry in environmental monitoring are highlighted and exemplified, with emphasis on trace elements. Sources and pathways of natural and especially man-made polluting substances as well as physico-chemical characteristics are given. Attention is paid to adequate sampling in various compartments of the environment comprising both lithosphere and biosphere. Trace analysis is dealt with using a variety of analytical techniques, including criteria for choice of suited techniques, as well as aspects of analytical quality assurance and control. Finally, some data on trace elements levels in soil and water samples from India are presented. (author)

  20. Library improvement through data analytics

    CERN Document Server

    Farmer, Lesley S J

    2017-01-01

    This book shows how to act on and make sense of data in libraries. Using a range of techniques, tools and methodologies it explains how data can be used to help inform decision making at every level. Sound data analytics is the foundation for making an evidence-based case for libraries, in addition to guiding myriad organizational decisions, from optimizing operations for efficiency to responding to community needs. Designed to be useful for beginners as well as those with a background in data, this book introduces the basics of a six point framework that can be applied to a variety of library settings for effective system based, data-driven management. Library Improvement Through Data Analytics includes: - the basics of statistical concepts - recommended data sources for various library functions and processes, and guidance for using census, university, or - - government data in analysis - techniques for cleaning data - matching data to appropriate data analysis methods - how to make descriptive statistics m...

  1. Co-ordinated research project on assessment of levels and health-effects of airborne particulate matter in mining, metal refining and metal working industries using nuclear and related analytical techniques. Report on the first research co-ordination meeting (RCM)

    International Nuclear Information System (INIS)

    1998-01-01

    The objectives of the CRP are to: (1) improve competence for research on workplace monitoring in terms of proper sampling and analytical procedures, (2) obtain relevant and reliable data on sources and levels of workplace pollution in various countries, (3) promote a better understanding of methods for the interpretation of such data including occupational heath studies, and (4) encourage closer collaboration between analytical scientists and researchers in the field of occupational health in the countries concerned. The CRP focuses on the use of nuclear and related analytical techniques for the following kinds of studies: (1) strategies and techniques for sampling of workplace airborne particulate matter and of human tissues and body fluids (hair, blood, etc.) sampling of exposed and non-exposed persons; (2) development of suitable analytical procedures for analysis of such types of samples; (3) workplace and personal monitoring of airborne particulate matter in the mining, refining and metal working industries, and the health effects of such exposure; and (4) tissue analysis of the workers exposed for biological monitoring and the health effects studies. This report includes the core and supplementary programme of the CRP; technical aspects of sampling, analysis, data processing, and quality assurance; and organizational aspects. The report includes also 10 papers contributed by the participants. Each individual contribution was indexed and provided with an abstract

  2. Clustering in analytical chemistry.

    Science.gov (United States)

    Drab, Klaudia; Daszykowski, Michal

    2014-01-01

    Data clustering plays an important role in the exploratory analysis of analytical data, and the use of clustering methods has been acknowledged in different fields of science. In this paper, principles of data clustering are presented with a direct focus on clustering of analytical data. The role of the clustering process in the analytical workflow is underlined, and its potential impact on the analytical workflow is emphasized.

  3. Analyticity without Differentiability

    Science.gov (United States)

    Kirillova, Evgenia; Spindler, Karlheinz

    2008-01-01

    In this article we derive all salient properties of analytic functions, including the analytic version of the inverse function theorem, using only the most elementary convergence properties of series. Not even the notion of differentiability is required to do so. Instead, analytical arguments are replaced by combinatorial arguments exhibiting…

  4. Dosimetric characterization of computerized tomography of 64 channels; Sobre la caracterizacion dosimetrica de un tomografo computarizado de 64 cortes

    Energy Technology Data Exchange (ETDEWEB)

    Gimeno-Fernandez, V.; Sotil-Baylos, J.; Garcia-Pazos, M.; Garcia-Pena, P.

    2006-07-01

    As a first step in the evaluation of effective dose to patients in Computed Tomography (CT) examinations, the purpose of this work was the assessment of the dose delivered by a new multislice scanner of 64 channels (Philips Brilliance 64c). This was done through the measurement of the CT Dose Index free in air, normalized to the unit of applied charge, using different beam collimations and tube voltages. Fitting nonlinear models to the observed data, kilo voltage and over beaming (penumbra) parameters have been elicited. The kilo voltage exponent of the relationship between CT dose index and kilo voltage varies from 2,84 to 2,88. The obtained penumbra with was 2,04 nm. Finally, corrections factors that must be applied to the measured dose indexes as a function of the applied collimation have been established from the estimated analytical relationships. (Author)

  5. Analytic methods to generate integrable mappings

    Indian Academy of Sciences (India)

    2015-10-22

    Oct 22, 2015 ... Systematic analytic methods of deriving integrable mappings from integrable nonlinear ordinary differential, differential-difference and lattice equations are presented. More specifically, we explain how to derive integrable mappings through four different techniques namely,. dis-cretization technique,; Lax ...

  6. International Congress on Analytical Chemistry. Abstracts. V. 1

    International Nuclear Information System (INIS)

    1997-01-01

    The collection of materials of the international congress on analytical chemistry taken place in Moscow in June 1997. The main directs of investigations in such regions of analytical chemistry as quantitative and qualitative analysis, microanalysis, sample preparation and preconcentration, analytical reagents, chromatography and related techniques, flow analysis, electroanalytical and kinetic methods sensors are elucidated

  7. Characterization of Pt catalysts supported in mixed oxides; Caracterizacion de catalizadores de Pt soportado en oxidos mixtos

    Energy Technology Data Exchange (ETDEWEB)

    Perez H, R.; Garcia C, M.A.; Gomez C, A.; Diaz, G. [Instituto Nacional de Investigaciones Nucleares, A.P. 18-1027, 11801 Mexico D.F. (Mexico)

    2000-07-01

    The catalytic supports TiO{sub 2}, ZrO{sub 2} and TiO{sub 2}-ZrO{sub 2} were prepared by the sol-gel technique. The incorporation of Pt to the supports was by the classical impregnation method. The catalytic materials were characterized (Pt/TiO{sub 2}, Pt/ZrO{sub 2} and Pt/TiO{sub 2}-ZrO{sub 2}) by diverse techniques to determine: the texture (BET), evolution of the catalytic materials synthesised after drying and calcination (Infrared spectroscopy) and by Thermogravimetric analysis. (Author)

  8. Analytical chemistry in a new analytical hot cell facility

    International Nuclear Information System (INIS)

    Wade, M.A.; Dykes, F.W.; Goettsche, J.H.

    1985-01-01

    The Remote Analytical Laboratory is a new facility at the Idaho Chemical Processing Plant designed to handle samples from the processing of spent nuclear fuel. It consists of a cold laboratory for analyzing process make-up samples, a warm laboratory for analyzing low-level (<100 mR/h) radioactive samples, and a hot cell for analyzing high-level radioactive samples. The hot cell is built in an L shape and contains six work stations, each equipped with a viewing window and two master/slave manipulators. The cell interfaces with a waste handling cell and maintenance area on one end and a glove box complex that interfaces with the warm laboratory on the other end. This paper discusses the remote analytical techniques and equipment developed for use in this facility

  9. A Novel Application of a Hybrid Delphi-Analytic Hierarchy Process (AHP) Technique: Identifying Key Success Factors in the Strategic Alignment of Collaborative Heterarchical Transportation Networks for Supply Chains

    OpenAIRE

    Yasanur Kayikci; Volker Stix; Larry J. LeBlanc; Michael R. Bartolacci

    2014-01-01

    This research studies heterarchical collaboration in logistical transport. Specifically, it utilizes a hybrid Delphi-Analytic Hierarchy Process (AHP) approach to explore the relevant criteria for the formation and maintenance of a strategic alignment for heterarchical transport collaboration. The importance of this work is that it applies a novel hybrid approach for identifying criteria for success to a little-studied form of supply chain collaboration: heterarchical collaborative transport. ...

  10. News for analytical chemists

    DEFF Research Database (Denmark)

    Andersen, Jens Enevold Thaulov; Karlberg, Bo

    2009-01-01

    The EuCheMS Division of Analytical Chemistry (DAC) maintains a website with informations on groups of analytical chemistry at European universities (www.dac-euchems. org). Everyone may contribute to the database and contributors are responsible for an annual update of the information. The service...... is offered free of charge. The report on activities of DAC during 2008 was published in journals of analytical chemistry where Manfred Grasserbauer contributed with his personal view on analytical chemistry in the assessment of climate changes and sustainable application of the natural resources to human...... directed to various topics of analytical chemistry. Although affected by the global financial crisis, the Euroanalysis Conference will be held on 6 to 10 September in Innsbruck, Austria. For next year, the programme for the analytical section of the 3rd European Chemistry Congress is in preparation...

  11. Analytical Chemistry in Russia.

    Science.gov (United States)

    Zolotov, Yuri

    2016-09-06

    Research in Russian analytical chemistry (AC) is carried out on a significant scale, and the analytical service solves practical tasks of geological survey, environmental protection, medicine, industry, agriculture, etc. The education system trains highly skilled professionals in AC. The development and especially manufacturing of analytical instruments should be improved; in spite of this, there are several good domestic instruments and other satisfy some requirements. Russian AC has rather good historical roots.

  12. Deriving Earth Science Data Analytics Requirements

    Science.gov (United States)

    Kempler, Steven J.

    2015-01-01

    Data Analytics applications have made successful strides in the business world where co-analyzing extremely large sets of independent variables have proven profitable. Today, most data analytics tools and techniques, sometimes applicable to Earth science, have targeted the business industry. In fact, the literature is nearly absent of discussion about Earth science data analytics. Earth science data analytics (ESDA) is the process of examining large amounts of data from a variety of sources to uncover hidden patterns, unknown correlations, and other useful information. ESDA is most often applied to data preparation, data reduction, and data analysis. Co-analysis of increasing number and volume of Earth science data has become more prevalent ushered by the plethora of Earth science data sources generated by US programs, international programs, field experiments, ground stations, and citizen scientists.Through work associated with the Earth Science Information Partners (ESIP) Federation, ESDA types have been defined in terms of data analytics end goals. Goals of which are very different than those in business, requiring different tools and techniques. A sampling of use cases have been collected and analyzed in terms of data analytics end goal types, volume, specialized processing, and other attributes. The goal of collecting these use cases is to be able to better understand and specify requirements for data analytics tools and techniques yet to be implemented. This presentation will describe the attributes and preliminary findings of ESDA use cases, as well as provide early analysis of data analytics toolstechniques requirements that would support specific ESDA type goals. Representative existing data analytics toolstechniques relevant to ESDA will also be addressed.

  13. Science Update: Analytical Chemistry.

    Science.gov (United States)

    Worthy, Ward

    1980-01-01

    Briefly discusses new instrumentation in the field of analytical chemistry. Advances in liquid chromatography, photoacoustic spectroscopy, the use of lasers, and mass spectrometry are also discussed. (CS)

  14. Analytical Electron Microscope

    Data.gov (United States)

    Federal Laboratory Consortium — The Titan 80-300 is a transmission electron microscope (TEM) equipped with spectroscopic detectors to allow chemical, elemental, and other analytical measurements to...

  15. Sampling and sample preparation development for analytical and on-line measurement techniques of process liquids; Naeytteenoton ja kaesittelyn kehittaeminen prosessinesteiden analytiikan ja on-line mittaustekniikan tarpeisiin - MPKT 11

    Energy Technology Data Exchange (ETDEWEB)

    Karttunen, K. [Oulu Univ. (Finland)

    1998-12-31

    Main goal of the research project is to develop sampling and sample handling methods and techniques for pulp and paper industry to be used for analysis and on-line purposes. The research focus specially on the research and development of the classification and separation methods and techniques needed for liquid and colloidal substances as well as in ion analysis. (orig.)

  16. Analytical Plan for Roman Glasses

    Energy Technology Data Exchange (ETDEWEB)

    Strachan, Denis M.; Buck, Edgar C.; Mueller, Karl T.; Schwantes, Jon M.; Olszta, Matthew J.; Thevuthasan, Suntharampillai; Heeren, Ronald M.

    2011-01-01

    Roman glasses that have been in the sea or underground for about 1800 years can serve as the independent “experiment” that is needed for validation of codes and models that are used in performance assessment. Two sets of Roman-era glasses have been obtained for this purpose. One set comes from the sunken vessel the Iulia Felix; the second from recently excavated glasses from a Roman villa in Aquileia, Italy. The specimens contain glass artifacts and attached sediment or soil. In the case of the Iulia Felix glasses quite a lot of analytical work has been completed at the University of Padova, but from an archaeological perspective. The glasses from Aquileia have not been so carefully analyzed, but they are similar to other Roman glasses. Both glass and sediment or soil need to be analyzed and are the subject of this analytical plan. The glasses need to be analyzed with the goal of validating the model used to describe glass dissolution. The sediment and soil need to be analyzed to determine the profile of elements released from the glass. This latter need represents a significant analytical challenge because of the trace quantities that need to be analyzed. Both pieces of information will yield important information useful in the validation of the glass dissolution model and the chemical transport code(s) used to determine the migration of elements once released from the glass. In this plan, we outline the analytical techniques that should be useful in obtaining the needed information and suggest a useful starting point for this analytical effort.

  17. Recent analytical applications of magnetic nanoparticles

    Directory of Open Access Journals (Sweden)

    Mohammad Faraji

    2016-07-01

    Full Text Available Analytical chemistry has experienced, as well as other areas of science, a big change due to the needs and opportunities provided by analytical nanoscience and nanotechnology. Now, nanotechnology is increasingly proving to be a powerful ally of analytical chemistry to achieve its objectives, and to simplify analytical processes. Moreover, the information needs arising from the growing nanotechnological activity are opening an exciting new field of action for analytical chemists. Magnetic nanoparticles have been used in various fields owing to their unique properties including large specific surface area and simple separation with magnetic fields. For Analytical applications, they have been used mainly for sample preparation techniques (magnetic solid phase extraction with different advanced functional groups (layered double hydroxide, β-cyclodextrin, carbon nanotube, graphen, polymer, octadecylsilane and automation of it, microextraction techniques enantioseparation and chemosensors. This review summarizes the basic principles and achievements of magnetic nanoparticles in sample preparation techniques, enantioseparation and chemosensors. Also, some selected articles recently published (2010-2016 have been reviewed and discussed.

  18. Main analytical techniques in quantitative determination of asbestos in complex matrices by means of X rays diffraction; Principali tecniche analitiche per la determinazione del contenuto di amianto in matrici complesse tramite diffrattometria a raggi X

    Energy Technology Data Exchange (ETDEWEB)

    De Stefano, L.; De Luca, F. [ENEL Ricerca, Brindisi (Italy). Polo Tecnico; Buccolieri, G. [Lecce Univ. (Italy). Dipt. Scienza dei Materiali

    1998-03-01

    Asbestos containing residues are classified as toxic or non toxic residues on the basis of free asbestos fibers weight content. Quantitative asbestos analysis must therefore be very careful and precise. Three analytical methods in quantitative X ray diffraction are here presented and compared. [Italiano] I rifiuti contenenti amianto sono classificati come pericolosi o non pericolosi a seconda del contenuto di fibre libere di amianto. L`analisi quantitativa dell`amianto deve pertanto essere precisa ed accurata. In quanto segue sono presentate e confrontate tre metodiche analitiche per la determinazione del contenuto di amianto in matrici complesse tramite diffrattometria a raggi X.

  19. Learning Analytics Considered Harmful

    Science.gov (United States)

    Dringus, Laurie P.

    2012-01-01

    This essay is written to present a prospective stance on how learning analytics, as a core evaluative approach, must help instructors uncover the important trends and evidence of quality learner data in the online course. A critique is presented of strategic and tactical issues of learning analytics. The approach to the critique is taken through…

  20. Smart city analytics

    DEFF Research Database (Denmark)

    Hansen, Casper; Hansen, Christian; Alstrup, Stephen

    2017-01-01

    is very useful when full records are not accessible or available. Smart city analytics does not necessarily require full city records. To our knowledge this preliminary study is the first to predict large increases in home care for smart city analytics....

  1. The Analytical Hierarchy Process

    DEFF Research Database (Denmark)

    Barfod, Michael Bruhn

    2007-01-01

    The technical note gathers the theory behind the Analytical Hierarchy Process (AHP) and present its advantages and disadvantages in practical use.......The technical note gathers the theory behind the Analytical Hierarchy Process (AHP) and present its advantages and disadvantages in practical use....

  2. Quine's "Strictly Vegetarian" Analyticity

    NARCIS (Netherlands)

    Decock, L.B.

    2017-01-01

    I analyze Quine’s later writings on analyticity from a linguistic point of view. In Word and Object Quine made room for a “strictly vegetarian” notion of analyticity. In later years, he developed this notion into two more precise notions, which I have coined “stimulus analyticity” and “behaviorist

  3. Of the Analytical Engine

    Indian Academy of Sciences (India)

    with me, at breakfast, the various powers of the Analytical Engine. After a long conversa- tion on the subject, he inquired what the machine could do if, .... The following conditions relate to the algebraic portion of the Analytical Engine: (e) The number of literal constants must be unlimited. (f) The number of variables must be ...

  4. European Analytical Column

    DEFF Research Database (Denmark)

    Karlberg, B.; Grasserbauer, M.; Andersen, Jens Enevold Thaulov

    2009-01-01

    The European Analytical Column has once more invited a guest columnist to give his views on various matters related to analytical chemistry in Europe. This year, we have invited Professor Manfred Grasserbauer of the Vienna University of Technology to present some of the current challenges for Eur...

  5. Analytic Moufang-transformations

    International Nuclear Information System (INIS)

    Paal, Eh.N.

    1988-01-01

    The paper is aimed to be an introduction to the concept of an analytic birepresentation of an analytic Moufang loop. To describe the deviation of (S,T) from associativity, the associators (S,T) are defined and certain constraints for them, called the minimality conditions of (S,T) are established

  6. Quo vadis, analytical chemistry?

    Science.gov (United States)

    Valcárcel, Miguel

    2016-01-01

    This paper presents an open, personal, fresh approach to the future of Analytical Chemistry in the context of the deep changes Science and Technology are anticipated to experience. Its main aim is to challenge young analytical chemists because the future of our scientific discipline is in their hands. A description of not completely accurate overall conceptions of our discipline, both past and present, to be avoided is followed by a flexible, integral definition of Analytical Chemistry and its cornerstones (viz., aims and objectives, quality trade-offs, the third basic analytical reference, the information hierarchy, social responsibility, independent research, transfer of knowledge and technology, interfaces to other scientific-technical disciplines, and well-oriented education). Obsolete paradigms, and more accurate general and specific that can be expected to provide the framework for our discipline in the coming years are described. Finally, the three possible responses of analytical chemists to the proposed changes in our discipline are discussed.

  7. Chemical characterisation of zircon-cadmium sulfoselenide ceramic pigments; Caracterizacion quimica de pigmentos ceramicos a base de sulfoseleniuro de cadmio

    Energy Technology Data Exchange (ETDEWEB)

    Gazulla Barreda, M. F.; Rodrigo Edo, M.; Blasco Roca, E.; Orduna Cordero, M.

    2013-07-01

    The present paper addresses the development of a methodology that allows the complete chemical characterisation of zircon cadmium sulfoselenide ceramic pigments including minor and major elements. To develop the methodology, five zircon-cadmium sulfoselenide pigments with different hues were selected, studying the different measurement process steps, from sample preparation to the optimisation of the measurement of the different components of the pigments by spectroscopic techniques (WD-XRF and elemental analysis by combustion and IR detection). The chemical characterisation method developed was validated with synthetic standards prepared from the mixture of certified reference materials and pure oxides because no certified referenced materials of this type of pigments were commercially available. The developed method can be used for a complete chemical characterization of zircon-cadmium sulfoselenide ceramic pigments with a very low uncertainty for all the elements analysed. (Author)

  8. Google BigQuery analytics

    CERN Document Server

    Tigani, Jordan

    2014-01-01

    How to effectively use BigQuery, avoid common mistakes, and execute sophisticated queries against large datasets Google BigQuery Analytics is the perfect guide for business and data analysts who want the latest tips on running complex queries and writing code to communicate with the BigQuery API. The book uses real-world examples to demonstrate current best practices and techniques, and also explains and demonstrates streaming ingestion, transformation via Hadoop in Google Compute engine, AppEngine datastore integration, and using GViz with Tableau to generate charts of query results. In addit

  9. Characterization and disposal of ion exchange resins used in nuclear installations; Caracterizacion y disposicion de resinas de intercambio ionico utilizadas en instalaciones nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Flores E, R.M.; Ortiz O, H.B.; Olguin G, M.T.; Emeterio H, M.; Garcia M, H. [ININ, 52045 Ocoyoacac, Estado de Mexico (Mexico)

    2006-07-01

    To dispose of an appropriate way the used ion exchange resins so much in the pool water purification systems of the TRIGA Mark III reactor like in the JS6500 gamma irradiator, of the National Institute of Nuclear Research, were carried out a series of analytic nuclear techniques and complementary conventional to those recommended by the ASTM, with the object of to control and to manage 14 lots of worn out resins appropriately. For its were identified the radioactive isotopes, the resins type, the grade of chemical pollution and the physicochemical degradation of the same ones. The lots of resins that didn't contain radioactive isotopes its were regenerated in an usual way, as long as those that if they controlled them they selected options for its final disposition. The first selected option was the extraction method of ion radioactive isotopes, concentrating the elution product by evaporation. As second option it was carried out the resins stabilization damaged by micro-encapsulation by forged to ambient temperature, using an organic polymer. Previous to the immobilization the resins were pretreated by vacuum drying, pulverization and thermal drying, however before carrying out this last, it was carried out a thermal gravimetric analysis to determine the drying conditions of the resins avoiding its chemical decomposition. (Author)

  10. Google analytics integrations

    CERN Document Server

    Waisberg, Daniel

    2015-01-01

    A roadmap for turning Google Analytics into a centralized marketing analysis platform With Google Analytics Integrations, expert author Daniel Waisberg shows you how to gain a more meaningful, complete view of customers that can drive growth opportunities. This in-depth guide shows not only how to use Google Analytics, but also how to turn this powerful data collection and analysis tool into a central marketing analysis platform for your company. Taking a hands-on approach, this resource explores the integration and analysis of a host of common data sources, including Google AdWords, AdSens

  11. Analytical strategies for phosphoproteomics

    DEFF Research Database (Denmark)

    Thingholm, Tine E; Jensen, Ole N; Larsen, Martin R

    2009-01-01

    sensitive and specific strategies. Today, most phosphoproteomic studies are conducted by mass spectrometric strategies in combination with phospho-specific enrichment methods. This review presents an overview of different analytical strategies for the characterization of phosphoproteins. Emphasis...

  12. Enzymes in Analytical Chemistry.

    Science.gov (United States)

    Fishman, Myer M.

    1980-01-01

    Presents tabular information concerning recent research in the field of enzymes in analytic chemistry, with methods, substrate or reaction catalyzed, assay, comments and references listed. The table refers to 128 references. Also listed are 13 general citations. (CS)

  13. Mobility Data Analytics Center.

    Science.gov (United States)

    2016-01-01

    Mobility Data Analytics Center aims at building a centralized data engine to efficiently manipulate : large-scale data for smart decision making. Integrating and learning the massive data are the key to : the data engine. The ultimate goal of underst...

  14. Process Analytical Chemistry

    OpenAIRE

    Trevisan, Marcello G.; Poppi, Ronei J.

    2006-01-01

    Process Analytical Chemistry (PAC) is an important and growing area in analytical chemistry, that has received little attention in academic centers devoted to the gathering of knowledge and to optimization of chemical processes. PAC is an area devoted to optimization and knowledge acquisition of chemical processes, to reducing costs and wastes and to making an important contribution to sustainable development. The main aim of this review is to present to the Brazilian community the developmen...

  15. Analytical Calculations for CAMEA

    OpenAIRE

    Markó, Márton

    2014-01-01

    CAMEA is a novel instrument concept, thus the performance has not been explored. Furthermore it is a complex instrument using many analyser arrays in a wide angular range. The performance of the instrument has been studied by use of three approaches: McStas simulations, analytical calculations, and prototyping. Due to the complexity of the instrument all of the previously mentioned methods can have faults misleading us during the instrument development. We use Monte Carlo and analytical model...

  16. Encyclopedia of analytical surfaces

    CERN Document Server

    Krivoshapko, S N

    2015-01-01

    This encyclopedia presents an all-embracing collection of analytical surface classes. It provides concise definitions  and description for more than 500 surfaces and categorizes them in 38 classes of analytical surfaces. All classes are cross references to the original literature in an excellent bibliography. The encyclopedia is of particular interest to structural and civil engineers and serves as valuable reference for mathematicians.

  17. Intermediate algebra & analytic geometry

    CERN Document Server

    Gondin, William R

    1967-01-01

    Intermediate Algebra & Analytic Geometry Made Simple focuses on the principles, processes, calculations, and methodologies involved in intermediate algebra and analytic geometry. The publication first offers information on linear equations in two unknowns and variables, functions, and graphs. Discussions focus on graphic interpretations, explicit and implicit functions, first quadrant graphs, variables and functions, determinate and indeterminate systems, independent and dependent equations, and defective and redundant systems. The text then examines quadratic equations in one variable, system

  18. The forensic validity of visual analytics

    Science.gov (United States)

    Erbacher, Robert F.

    2008-01-01

    The wider use of visualization and visual analytics in wide ranging fields has led to the need for visual analytics capabilities to be legally admissible, especially when applied to digital forensics. This brings the need to consider legal implications when performing visual analytics, an issue not traditionally examined in visualization and visual analytics techniques and research. While digital data is generally admissible under the Federal Rules of Evidence [10][21], a comprehensive validation of the digital evidence is considered prudent. A comprehensive validation requires validation of the digital data under rules for authentication, hearsay, best evidence rule, and privilege. Additional issues with digital data arise when exploring digital data related to admissibility and the validity of what information was examined, to what extent, and whether the analysis process was sufficiently covered by a search warrant. For instance, a search warrant generally covers very narrow requirements as to what law enforcement is allowed to examine and acquire during an investigation. When searching a hard drive for child pornography, how admissible is evidence of an unrelated crime, i.e. drug dealing. This is further complicated by the concept of "in plain view". When performing an analysis of a hard drive what would be considered "in plain view" when analyzing a hard drive. The purpose of this paper is to discuss the issues of digital forensics and the related issues as they apply to visual analytics and identify how visual analytics techniques fit into the digital forensics analysis process, how visual analytics techniques can improve the legal admissibility of digital data, and identify what research is needed to further improve this process. The goal of this paper is to open up consideration of legal ramifications among the visualization community; the author is not a lawyer and the discussions are not meant to be inclusive of all differences in laws between states and

  19. Development of an analytical model for the determination of {sup 60}Co in aqueous samples by atomic absorption and gamma spectrometry techniques; Elaboracion de un modelo analitico para la determinacion de {sup 60}Co en muestras acuosas mediante tecnicas de absorcion atomica y espectrometria gamma

    Energy Technology Data Exchange (ETDEWEB)

    Solis A, N. A.

    2015-07-01

    The applications of the nuclear energy in industry and medicine generate radioactive wastes that must be isolated and confined in order to limit its spread in the biosphere. These types of wastes are generated in hospitals, industry, research centers and nuclear power plants (during de fuel cycle). The radioactive elements (radionuclides) cannot be destroyed by any known method, either chemical or mechanical. Its final destruction is produced by radioactive decay, which makes them stable isotopes, or nuclear transmutation being bombarded with atomic particles. Consequently, the radioactive waste management is to control the radioactive discharges and reduce to tolerable limits, eliminating of effluents and wastes the radionuclides of interest, concentrating them so they can be stored or evacuated so that later not appear in dangerous concentration in the biosphere. In Mexico, the main generators of radioactive wastes are the nuclear power plant of Laguna Verde in Veracruz, Hospitals of the public and private sector, in addition Instituto Nacional de Investigaciones Nucleares (ININ) some institutes and facilities of the UNAM and Instituto Politecnico Nacional (IPN) and industries among others. The aqueous radioactive wastes, particularly those from the nuclear power plants contain traces of cobalt-60. Currently there is no model or analytical technique for the separation of this radionuclide, so it became necessary to develop an analytical model for separation and facilitate their disposal. In this paper was shown that atomic absorption and gamma spectrometry techniques can separate the active concentration of the inactive, which is important because the total concentration can be associated through direct relationships with the wear of metal parts of the nuclear reactor, since the metal alloys of the same reactor containing a fraction of cobalt. Also this analytical and mathematical model that can be reproducible and applicable to full sets of samples and that this

  20. Analytic manifolds in uniform algebras

    International Nuclear Information System (INIS)

    Tonev, T.V.

    1988-12-01

    Here we extend Bear-Hile's result concerning the version of famous Bishop's theorem for one-dimensional analytic structures in two directions: for n-dimensional complex analytic manifolds, n>1, and for generalized analytic manifolds. 14 refs

  1. Atmospheric aerosol studies using the 'Gent' stacked filter unit and other aerosol collectors, with multi-elemental analysis of the samples by nuclear-related analytical techniques. Appendix 4

    International Nuclear Information System (INIS)

    Maenhaut, Willy; Francois, Filip; Cafmeyer, Jan; Okunade, Olusola

    1995-01-01

    Our research within the core programme of the Co-ordinated Research Programme (CRP) on Air Pollution is described. This included the analysis of the analytical quality control Nuclepore filter samples, work on the calibration of the PM10 inlet of the 'Gent' stacked filter unit (SFU) sampler, and an aerosol study with this SFU sampler at an urban residential site in Gent. The calibration of the Gent PM10 inlet was done through intercomparisons with commercially available PM10 samplers, and quite reasonable agreement was obtained. For the study at the urban residential site, a total of 118 SFU samples were collected. The samples were analyzed for the particulate mass, black carbon and up to 29 elements. The elements were measured by PIXE and short-irradiation INAA. Median atmospheric concentrations and enrichment factors were calculated for the fine and coarse size fractions, and average FINE/COARSE ratios were derived. The median concentrations were compared with those from a study, done at the same site in the fall of 1986. The levels of the automotive elements Pb and Br had decreased by a factor of about three relative to 1986, but most other elements exhibited very similar concentrations. A brief overview is given of the status in our various regional and global scale aerosol studies. Finally, our plans for future work are given. (author)

  2. Boehm Titration Revisited (Part II: A Comparison of Boehm Titration with Other Analytical Techniques on the Quantification of Oxygen-Containing Surface Groups for a Variety of Carbon Materials

    Directory of Open Access Journals (Sweden)

    Jan Schönherr

    2018-04-01

    Full Text Available The use of the Boehm titration (BT method as an analytical tool for the quantification of oxygen-containing surface groups is systematically investigated for oxidized carbon black, carbon nanotubes and two active carbons with specific surface areas between 60 and 1750 m2 g−1. The accuracy of the BT method is quantitatively compared with results from elemental analysis (EA, temperature programmed desorption (TPD, and X-ray photoelectron spectroscopy (XPS. Overall, the results from TPD are in line with the values obtained by BT. Both show the equal ratio of the oxygen groups to each other. Within the series of carbon samples, all methods provide similar trends for the total oxygen content yet the absolute numbers are deviating significantly. Reasons for these discrepancies are discussed and linked to the specific characteristics of the different methods. As the BT method is a solution based method, it only probes the surface fraction of the carbon that is accessible to the base solution. That means, it probes the relevant fraction for applications where carbon is in contact to aqueous solutions. Overall, the BT method can be conveniently applied to a broad range of carbon materials as long as the samples are sufficiently hydrophilic and of the enough sample amount is provided.

  3. Croatian Analytical Terminology

    Directory of Open Access Journals (Sweden)

    Kastelan-Macan; M.

    2008-04-01

    Full Text Available Results of analytical research are necessary in all human activities. They are inevitable in making decisions in the environmental chemistry, agriculture, forestry, veterinary medicine, pharmaceutical industry, and biochemistry. Without analytical measurements the quality of materials and products cannot be assessed, so that analytical chemistry is an essential part of technical sciences and disciplines.The language of Croatian science, and analytical chemistry within it, was one of the goals of our predecessors. Due to the political situation, they did not succeed entirely, but for the scientists in independent Croatia this is a duty, because language is one of the most important features of the Croatian identity. The awareness of the need to introduce Croatian terminology was systematically developed in the second half of the 19th century, along with the founding of scientific societies and the wish of scientists to write their scientific works in Croatian, so that the results of their research may be applied in economy. Many authors of textbooks from the 19th and the first half of the 20th century contributed to Croatian analytical terminology (F. Rački, B. Šulek, P. Žulić, G. Pexidr, J. Domac, G. Janeček , F. Bubanović, V. Njegovan and others. M. DeŢelić published the first systematic chemical terminology in 1940, adjusted to the IUPAC recommendations. In the second half of 20th century textbooks in classic analytical chemistry were written by V. Marjanović-Krajovan, M. Gyiketta-Ogrizek, S. Žilić and others. I. Filipović wrote the General and Inorganic Chemistry textbook and the Laboratory Handbook (in collaboration with P. Sabioncello and contributed greatly to establishing the terminology in instrumental analytical methods.The source of Croatian nomenclature in modern analytical chemistry today are translated textbooks by Skoog, West and Holler, as well as by Günnzler i Gremlich, and original textbooks by S. Turina, Z.

  4. Recent analytical applications of nanoparticle sensitized lucigenin ...

    Indian Academy of Sciences (India)

    When chemiluminescence has been introduced to analytical chemistry as a detection technique, it has been shown to meet many ... luminescence has been extensively applied to bioanalysis and immunoassays. Most recently ... for the detection of fluorescent organic compounds (FOCs). The CL system is composed of an ...

  5. Analytical solution of one dimensional temporally dependent ...

    African Journals Online (AJOL)

    ... chemically non-reactive. The first order decay term which is inversely proportional to the dispersion coefficient is also considered. Initially the porous domain is considered solute free. Analytical solutions are obtained by using Laplace transform technique for continuous uniform and increasing input source concentration.

  6. Recent analytical applications of nanoparticle sensitized lucigenin ...

    Indian Academy of Sciences (India)

    luminescence upon contact with iron in hemoglobin. When chemiluminescence takes place in living organisms, the phe- nomenon is called bioluminescence. A light stick emits light by chemiluminescence. Chemiluminescent techniques can be applied in two types of analytical methods: direct method and indirect method.

  7. Information theory in analytical chemistry

    National Research Council Canada - National Science Library

    Eckschlager, Karel; Danzer, Klaus

    1994-01-01

    Contents: The aim of analytical chemistry - Basic concepts of information theory - Identification of components - Qualitative analysis - Quantitative analysis - Multicomponent analysis - Optimum analytical...

  8. Synthesis, characterization and application of calcium oxides for the adsorption of carbon dioxide; Sintesis, caracterizacion y aplicacion de oxidos de calcio para la adsorcion de dioxido de carbono

    Energy Technology Data Exchange (ETDEWEB)

    Granados P, A.

    2016-07-01

    In this research, calcium oxide (Ca O), nanocrystalline calcium oxide and their Fe and Ni nano composites were synthesized by solution combustion and high-energy ball-milling processes respectively, in order to study their CO{sub 2} adsorption behavior under different pressure and temperature conditions. The obtained materials were characterized by different analytical techniques: XRD, Sem-EDS and N{sub 2} physisorption measurements. CO{sub 2} adsorption experiments on adsorbents at different temperatures and pressures, were carried in a stainless steel Parr type high vacuum reactor. The CO{sub 2} adsorbed on the materials was determined by thermogravimetric analysis and mass spectrophotometry. The results showed that the synthesis methods, solution combustion and high energy ball milling allowed to improve the materials textural and structural properties such as specific surface area, total pore volume, pore size distribution and nano crystallinity, which played an important effect on the CO{sub 2} adsorption behavior. It was found that the Ca O obtained by solution combustion and milled during 2.5 h, showed the maximum CO{sub 2} adsorption capacity per gram of material (9.311 mmol/g) at ambient temperature and pressure, by chemisorption as adsorption mechanism, due CaCO{sub 3} formation, which was confirmed by infrared spectroscopy, X-ray diffraction and X photoelectron spectroscopy studies. In general, the investigation results show the potential benefits of these materials efficient use, based on Ca O obtained by solution combustion and treated by high-energy ball milling, as well as that will mitigate environmental problems posed by global warming and reduce the negative impacts to the environment and living beings. (Author)

  9. Doing social media analytics

    Directory of Open Access Journals (Sweden)

    Phillip Brooker

    2016-07-01

    Full Text Available In the few years since the advent of ‘Big Data’ research, social media analytics has begun to accumulate studies drawing on social media as a resource and tool for research work. Yet, there has been relatively little attention paid to the development of methodologies for handling this kind of data. The few works that exist in this area often reflect upon the implications of ‘grand’ social science methodological concepts for new social media research (i.e. they focus on general issues such as sampling, data validity, ethics, etc.. By contrast, we advance an abductively oriented methodological suite designed to explore the construction of phenomena played out through social media. To do this, we use a software tool – Chorus – to illustrate a visual analytic approach to data. Informed by visual analytic principles, we posit a two-by-two methodological model of social media analytics, combining two data collection strategies with two analytic modes. We go on to demonstrate each of these four approaches ‘in action’, to help clarify how and why they might be used to address various research questions.

  10. Advanced business analytics

    CERN Document Server

    Lev, Benjamin

    2015-01-01

    The book describes advanced business analytics and shows how to apply them to many different professional areas of engineering and management. Each chapter of the book is contributed by a different author and covers a different area of business analytics. The book connects the analytic principles with business practice and provides an interface between the main disciplines of engineering/technology and the organizational, administrative and planning abilities of management. It also refers to other disciplines such as economy, finance, marketing, behavioral economics and risk analysis. This book is of special interest to engineers, economists and researchers who are developing new advances in engineering management but also to practitioners working on this subject.

  11. Competing on talent analytics.

    Science.gov (United States)

    Davenport, Thomas H; Harris, Jeanne; Shapiro, Jeremy

    2010-10-01

    Do investments in your employees actually affect workforce performance? Who are your top performers? How can you empower and motivate other employees to excel? Leading-edge companies such as Google, Best Buy, Procter & Gamble, and Sysco use sophisticated data-collection technology and analysis to answer these questions, leveraging a range of analytics to improve the way they attract and retain talent, connect their employee data to business performance, differentiate themselves from competitors, and more. The authors present the six key ways in which companies track, analyze, and use data about their people-ranging from a simple baseline of metrics to monitor the organization's overall health to custom modeling for predicting future head count depending on various "what if" scenarios. They go on to show that companies competing on talent analytics manage data and technology at an enterprise level, support what analytical leaders do, choose realistic targets for analysis, and hire analysts with strong interpersonal skills as well as broad expertise.

  12. Regional and global atmospheric aerosol studies using the ''Gent'' stacked filter unit sampler and other aerosol collectors, with multi-elemental analysis of the samples by nuclear-related analytical techniques

    International Nuclear Information System (INIS)

    Maenhaut, W.; Francois, F.; Salma, I.; Cafmeyer, J.; Gilot, C.

    1994-01-01

    The ''Gent'' staked filter unit sampler and other collection devices are used in regional and global scale studies on the tropospheric atmospheric aerosols, its composition, sources and fate. The aerosol samples are analyzed by particle-induced X-ray emission analysis, instrumental neutron activation analysis, ion chromatography, a light reflectance technique (for determining black carbon), and gravimetry (for measuring the particular mass). In evaluating the data, use is made of receptor modelling techniques, transport models and wind sector analysis, and also of air mass trajectories and other meteorological information. Preliminary results from a long-term study in southern Norway are presented. It is suggested that the anthropogenic and soil dust aerosol components are mainly adverted to southern Norway by long-range transport and that the major fraction of the submicrometer particle mass is from anthropogenic origin. Preliminary results are also presented for an intensive study in southern Africa. On the basis of the data for two sites (about 40 km apart) in the Kruger National Park it was concluded that regionally representative aerosol samples were collected and that the biomass burning products account for more than 50% of the fine particle mass. Finally, our plans for future work are given. (author). 70 refs, 4 figs, 1 tab

  13. Social network data analytics

    CERN Document Server

    Aggarwal, Charu C

    2011-01-01

    Social network analysis applications have experienced tremendous advances within the last few years due in part to increasing trends towards users interacting with each other on the internet. Social networks are organized as graphs, and the data on social networks takes on the form of massive streams, which are mined for a variety of purposes. Social Network Data Analytics covers an important niche in the social network analytics field. This edited volume, contributed by prominent researchers in this field, presents a wide selection of topics on social network data mining such as Structural Pr

  14. An analytic thomism?

    Directory of Open Access Journals (Sweden)

    Daniel Alejandro Pérez Chamorro.

    2012-12-01

    Full Text Available For 50 years the philosophers of the Anglo-Saxon analytic tradition (E. Anscombre, P. Geach, A. Kenny, P. Foot have tried to follow the Thomas Aquinas School which they use as a source to surpass the Cartesian Epistemology and to develop the virtue ethics. Recently, J. Haldane has inaugurated a program of “analytical thomism” which main result until the present has been his “theory of identity mind/world”. Nevertheless, none of Thomás’ admirers has still found the means of assimilating his metaphysics of being.

  15. Foundations of predictive analytics

    CERN Document Server

    Wu, James

    2012-01-01

    Drawing on the authors' two decades of experience in applied modeling and data mining, Foundations of Predictive Analytics presents the fundamental background required for analyzing data and building models for many practical applications, such as consumer behavior modeling, risk and marketing analytics, and other areas. It also discusses a variety of practical topics that are frequently missing from similar texts. The book begins with the statistical and linear algebra/matrix foundation of modeling methods, from distributions to cumulant and copula functions to Cornish--Fisher expansion and o

  16. User-Centered Evaluation of Visual Analytics

    Energy Technology Data Exchange (ETDEWEB)

    Scholtz, Jean C.

    2017-10-01

    visual analytics. A history of analysis and analysis techniques and problems is provided as well as an introduction to user-centered evaluation and various evaluation techniques for readers from different disciplines. The understanding of these techniques is imperative if we wish to support analysis in the visual analytics software we develop. Currently the evaluations that are conducted and published for visual analytics software are very informal and consist mainly of comments from users or potential users. Our goal is to help researchers in visual analytics to conduct more formal user-centered evaluations. While these are time-consuming and expensive to carryout, the outcomes of these studies will have a defining impact on the field of visual analytics and help point the direction for future features and visualizations to incorporate. While many researchers view work in user-centered evaluation as a less-than-exciting area to work, the opposite is true. First of all, the goal is user-centered evaluation is to help visual analytics software developers, researchers, and designers improve their solutions and discover creative ways to better accommodate their users. Working with the users is extremely rewarding as well. While we use the term “users” in almost all situations there are a wide variety of users that all need to be accommodated. Moreover, the domains that use visual analytics are varied and expanding. Just understanding the complexities of a number of these domains is exciting. Researchers are trying out different visualizations and interactions as well. And of course, the size and variety of data are expanding rapidly. User-centered evaluation in this context is rapidly changing. There are no standard processes and metrics and thus those of us working on user-centered evaluation must be creative in our work with both the users and with the researchers and developers.

  17. Synthesis and electrochemical characterization of palladium-based cathode catalysts, resistant to the presence of methanol; Sintesis y caracterizacion electroquimica de catalizadores catodicos base paladio, resistentes a la presencia de metanol

    Energy Technology Data Exchange (ETDEWEB)

    Salvador, Jose J. [Centro de Investigacion y de Estudios Avanzados del IPN, Mexico D.F. (Mexico)] e-mail: jsalvador@cinvestav.mx; Collins, Virginia H. [Centro de Investigacion en Materiales Avanzados, Chihuahua, Chihuahua (Mexico); Solorza Feria, Omar [Centro de Investigacion y de Estudios Avanzados del IPN, Mexico D.F. (Mexico)

    2009-09-15

    This work presents the synthesis and characterization of palladium-based electrocatalysts (PdSn and PdPtSn) prepared with the salt-reduction method for oxygen reduction reaction (ORR). The compounds obtained are characterized by sweep electron microscopy, electron transmission microscopy and x-ray diffraction of powder. The electrocatalysts obtained had particle sizes less than 10 nm. The evaluation of the catalytic activity of the catalysts was performed using cyclic voltametry and rotating disc electrode. These experiments were conducted in an H{sub 2}SO{sub 4} 0.5 M solution with different methanol concentrations. The presence of methanol improved the catalytic activity of PdSn, but did not show any effect on the PdPtSn alloy. The performance of the DMFC mono cell using PdPtSn as a cathode showed a potential of 10 mW cm{sup -2} at 50 degrees Celsius. [Spanish] En este trabajo se presenta la sintesis y caracterizacion de electrocatalizadores de base Paladio (PdSn y PdPtSn) preparados mediante el metodo de reduccion de sales, para la reaccion de reduccion de oxigeno (RRO). Los compuestos obtenidos se caracterizaron por microscopia electronica de barrido, microscopia electronica de transmision y difraccion de rayos X de polvos. Los electrocatalizadores obtenidos presentaron un tamano de particula menores a 10 nm. La evaluacion de la actividad catalitica de los catalizadores se llevo a cabo mediante voltametria Ciclica y electrodo de disco rotatorio, estos experimentos fueron realizados en una solucion de H{sub 2}SO{sub 4} 0.5 M con diferentes concentraciones de metanol. La presencia de metanol mejoro la actividad catalitica de PdSn, pero no mostro ningun efecto sobre la aleacion PdPtSn. El desempeno de la monocelda de DMFC usando como catodo PdPtSn, mostro una potencia de 10 mW cm{sup -2} a 50 grados centigrados.

  18. Fighting falsified medicines: The analytical approach.

    Science.gov (United States)

    Rebiere, Hervé; Guinot, Pauline; Chauvey, Denis; Brenier, Charlotte

    2017-08-05

    Given the harm to human health, the fight against falsified medicines has become a priority issue that involves numerous actors. Analytical laboratories contribute by performing analyses to chemically characterise falsified samples and assess their hazards for patients. A wide range of techniques can be used to obtain individual information on the organic and inorganic composition, the presence of an active substance or impurities, or the crystalline arrangement of the formulation's compound. After a presentation of these individual techniques, this review puts forward a methodology to combine them. In order to illustrate this approach, examples from the scientific literature (products used for erectile dysfunction treatment, weight loss and malaria) are placed in the centre of the proposed methodology. Combining analytical techniques allows the analyst to conclude on the falsification of a sample, on its compliance in terms of pharmaceutical quality and finally on the safety for patients. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. Discourse-Centric Learning Analytics: Mapping the Terrain

    Science.gov (United States)

    Knight, Simon; Littleton, Karen

    2015-01-01

    There is an increasing interest in developing learning analytic techniques for the analysis, and support of, high-quality learning discourse. This paper maps the terrain of discourse-centric learning analytics (DCLA), outlining the distinctive contribution of DCLA and outlining a definition for the field moving forwards. It is our claim that DCLA…

  20. Game analytics maximizing the value of player data

    CERN Document Server

    Seif El-Nasr, Magy

    2013-01-01

    The first book on game telemetry, game metrics and game analytics Numerous case studies from industry and research showing which analytical techniques to use in which situations Essential reading for developers, researchers and students on the current industry-wide adoption of data-driven methods for game development