ANALYTICAL APPROACHES TO THE STUDY OF EXPORT TRANSACTIONS

Directory of Open Access Journals (Sweden)

Ekaterina Viktorovna Medvedeva

2015-12-01

Full Text Available Analytical approaches to research of export operations depend on the conditions containing in separate external economic contracts with foreign buyers and also on a form of an exit of the Russian supplier of export goods to a foreign market. By means of analytical procedures it is possible to foresee and predict admissible situations which can have an adverse effect on a financial position of the economic subject. The economic entity, the engaged foreign economic activity, has to carry out surely not only the analysis of the current activity, but also the analysis of export operations. In article analytical approaches of carrying out the analysis of export operations are considered, on an example the analysis of export operations in dynamics is submitted, it is recommended to use the formulas allowing to estimate export in dynamics. For the comparative analysis export volume in the comparable prices is estimated. On the commodity groups including and quantitatively and qualitatively commensurable goods, the index of quantitative structure is calculated, the coefficient of delay of delivery of goods in comparison with other periods pays off. Carrying out the analysis allows to determine a tendency of change of export deliveries by export operations for the analyzed period for adoption of administrative decisions.Purpose Definition of the ways and receptions of the analysis applying when carrying out the analysis of export operations.Methodology in article economic-mathematical methods, and also statistical methods of the analysis were used.Results: the most informative parameters showing some aspects of carrying out the analysis of export operations are received.Practical implications it is expedient to apply the received results the economic subjects which are carrying out foreign economic activity, one of which elements are export operations.

Application of Statistical Methods to Activation Analytical Results near the Limit of Detection

DEFF Research Database (Denmark)

Heydorn, Kaj; Wanscher, B.

1978-01-01

Reporting actual numbers instead of upper limits for analytical results at or below the detection limit may produce reliable data when these numbers are subjected to appropriate statistical processing. Particularly in radiometric methods, such as activation analysis, where individual standard...... deviations of analytical results may be estimated, improved discrimination may be based on the Analysis of Precision. Actual experimental results from a study of the concentrations of arsenic in human skin demonstrate the power of this principle....

$W^+ W^-$ + Jet: Compact Analytic Results

Energy Technology Data Exchange (ETDEWEB)

Campbell, John [Fermilab; Miller, David [Glasgow U.; Robens, Tania [Dresden, Tech. U.

2016-01-14

In the second run of the LHC, which started in April 2015, an accurate understanding of Standard Model processes is more crucial than ever. Processes including electroweak gauge bosons serve as standard candles for SM measurements, and equally constitute important background for BSM searches. We here present the NLO QCD virtual contributions to W+W- + jet in an analytic format obtained through unitarity methods and show results for the full process using an implementation into the Monte Carlo event generator MCFM. Phenomenologically, we investigate total as well as differential cross sections for the LHC with 14 TeV center-of-mass energy, as well as a future 100 TeV proton-proton machine. In the format presented here, the one-loop virtual contributions also serve as important ingredients in the calculation of W+W- pair production at NNLO.

The Population Growth and Carrying Capacity in Semarang City

Science.gov (United States)

Hariyanto; Hadi, Sudharto P.; Buchori, Imam

2018-02-01

Population growth and development of city activities take some lands to carry them. As a result, land use competition happens among persons, society or sector. Land necessity for settlement, industry, or sector has taken over farm land, therefore farm land has been converted intensively and massively. Chronologically, population growth will cause land necessity increase. Unproductive land, especially farm land will be converted. Furthermore, farm land conversion will cause carrying capacity change. Carrying capacity has certain bio capacity. With the population growth, it will increase resource consumption; on the other side, farm land conversion will decrease carrying capacity. The objective of the study is to know about the influence of population growth towards carrying capacity (bio capacity) in Semarang city. Land consumption per capita is indeed influenced by city population, the higher the population is, the lower the land consumption per capita. With the population growth, it will influence carrying capacity. Carrying capacity here is the ratio of area to population. Analytical descriptive method is applied in the study with all sub-districts in Semarang city as the analysis unit. Population here is sub-district area and population per sub-district in Semarang city. Population growth data period is from 2000 until 2015. Main variables of the study are area per sub-district, population, population growth, carrying capacity. Result of the study shows significant influence of carrying capacity decrease, especially some outskirts in Semarang city. This condition happens because the outskirts in Semarang city tend to have dense population growth. Range of carrying capacity in Semarang city is from 0,007 to 0,117 of 0 to 1. Almost all sub-districts in Semarang city show miserable condition, except Mijen and Tugu. The conclusion of the study is that population will decrease carrying capacity. Therefore, the government should control population growth by paying

Preliminary Results on Uncertainty Quantification for Pattern Analytics

Energy Technology Data Exchange (ETDEWEB)

Stracuzzi, David John [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Brost, Randolph [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Chen, Maximillian Gene [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Malinas, Rebecca [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Peterson, Matthew Gregor [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Phillips, Cynthia A. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Robinson, David G. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Woodbridge, Diane [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

2015-09-01

This report summarizes preliminary research into uncertainty quantification for pattern ana- lytics within the context of the Pattern Analytics to Support High-Performance Exploitation and Reasoning (PANTHER) project. The primary focus of PANTHER was to make large quantities of remote sensing data searchable by analysts. The work described in this re- port adds nuance to both the initial data preparation steps and the search process. Search queries are transformed from does the specified pattern exist in the data? to how certain is the system that the returned results match the query? We show example results for both data processing and search, and discuss a number of possible improvements for each.

Complete analytic results for radiative-recoil corrections to ground-state muonium hyperfine splitting

International Nuclear Information System (INIS)

Karshenboim, S.G.; Shelyuto, V.A.; Eides, M.E.

1988-01-01

Analytic expressions are obtained for radiative corrections to the hyperfine splitting related to the muon line. The corresponding contribution amounts to (Z 2 a) (Za) (m/M) (9/2 ζ(3) - 3π 2 ln 2 + 39/8) in units of the Fermi hyperfine splitting energy. A complete analytic result for all radiative-recoil corrections is also presented

Advances in classical and analytical mechanics: A reviews of author’s results

Directory of Open Access Journals (Sweden)

Hedrih-Stevanović Katica R.

2013-01-01

Full Text Available A review, in subjective choice, of author’s scientific results in area of: classical mechanics, analytical mechanics of discrete hereditary systems, analytical mechanics of discrete fractional order system vibrations, elastodynamics, nonlinear dynamics and hybrid system dynamics is presented. Main original author’s results were presented through the mathematical methods of mechanics with examples of applications for solving problems of mechanical real system dynamics abstracted to the theoretical models of mechanical discrete or continuum systems, as well as hybrid systems. Paper, also, presents serries of methods and scientific results authored by professors Mitropolyski, Andjelić and Rašković, as well as author’s of this paper original scientific research results obtained by methods of her professors. Vector method based on mass inertia moment vectors and corresponding deviational vector components for pole and oriented axis, defined in 1991 by K. Hedrih, is presented. Results in construction of analytical dynamics of hereditary discrete system obtained in collaboration with O. A. Gorosho are presented. Also, some selections of results author’s postgraduate students and doctorantes in area of nonlinear dynamics are presented. A list of scientific projects headed by author of this paper is presented with a list of doctoral dissertation and magister of sciences thesis which contain scientific research results obtained under the supervision by author of this paper or their fist doctoral candidates. [Projekat Ministarstva nauke Republike Srbije, br. ON174001: Dynamics of hybrid systems with complex structures

Analytical results for a hole in an antiferromagnet

International Nuclear Information System (INIS)

Li, Y.M.; d'Ambrumenil, N.; Su, Z.B.

1996-04-01

The Green's function for a hole moving in an antiferromagnet is derived analytically in the long-wavelength limit. We find that the infrared divergence is eliminated in two and higher dimensions so that the quasiparticle weight is finite. Our results also suggest that the hole motion is polaronic in nature with a bandwidth proportional to t 2 /J exp[-c(t/J) 2 ] (c is a constant) for J/t >or approx 0.5. The connection of the long-wavelength approximation to the first-order approximation in the cumulant expansion is also clarified. (author). 23 refs, 2 figs

Analytical performances of food microbiology laboratories - critical analysis of 7 years of proficiency testing results.

Science.gov (United States)

Abdel Massih, M; Planchon, V; Polet, M; Dierick, K; Mahillon, J

2016-02-01

Based on the results of 19 food microbiology proficiency testing (PT) schemes, this study aimed to assess the laboratory performances, to highlight the main sources of unsatisfactory analytical results and to suggest areas of improvement. The 2009-2015 results of REQUASUD and IPH PT, involving a total of 48 laboratories, were analysed. On average, the laboratories failed to detect or enumerate foodborne pathogens in 3·0% of the tests. Thanks to a close collaboration with the PT participants, the causes of outliers could be identified in 74% of the cases. The main causes of erroneous PT results were either pre-analytical (handling of the samples, timing of analysis), analytical (unsuitable methods, confusion of samples, errors in colony counting or confirmation) or postanalytical mistakes (calculation and encoding of results). PT schemes are a privileged observation post to highlight analytical problems, which would otherwise remain unnoticed. In this perspective, this comprehensive study of PT results provides insight into the sources of systematic errors encountered during the analyses. This study draws the attention of the laboratories to the main causes of analytical errors and suggests practical solutions to avoid them, in an educational purpose. The observations support the hypothesis that regular participation to PT, when followed by feed-back and appropriate corrective actions, can play a key role in quality improvement and provide more confidence in the laboratory testing results. © 2015 The Society for Applied Microbiology.

Application of analytical procedure on system reliability, GO-FLOW

International Nuclear Information System (INIS)

Matsuoka, Takeshi; Fukuto, Junji; Mitomo, Nobuo; Miyazaki, Keiko; Matsukura, Hiroshi; Kobayashi, Michiyuki

2000-01-01

In the Ship Research Institute, research and development of GO-FLOW procedure with various advanced functions as a system reliability analysis method occupying main part of the probabilistic safety assessment (PSA) were promoted. In this study, as an important evaluation technique on executing PSA with lower than level 3, by intending fundamental upgrading of the GO-FLOW procedure, a safety assessment system using the GO-FLOW as well as an analytical function coupling of dynamic behavior analytical function and physical behavior of the system with stochastic phenomenon change were developed. In 1998 fiscal year, preparation and verification of various functions such as dependence addition between the headings, rearrangement in order of time, positioning of same heading to plural positions, calculation of forming frequency with elapsing time were carried out. And, on a simulation analysis function of accident sequence, confirmation on analysis covering all of main accident sequence in the reactor for improved marine reactor, MRX was carried out. In addition, a function near automatically producible on input data for analysis was also prepared. As a result, the conventional analysis not always easy understanding on analytical results except an expert of PSA was solved, and understanding of the accident phenomenon, verification of validity on analysis, feedback to analysis, and feedback to design could be easily carried out. (G.K.)

Analytical method and result of radiation exposure for depressurization accident of HTTR

International Nuclear Information System (INIS)

Sawa, K.; Shiozawa, S.; Mikami, H.

1990-01-01

The Japan Atomic Energy Research Institute (JAERI) is now proceeding with the construction design of the High Temperature Engineering Test Reactor (HTTR). Since the HTTR has some characteristics different from LWRs, analytical method of radiation exposure in accidents provided for LWRs can not be applied directly. This paper describes the analytical method of radiation exposure developed by JAERI for the depressurization accident, which is the severest accident in respect to radiation exposure among the design basis accidents of the HTTR. The result is also described in this paper

Tank 241-S-102, Core 232 analytical results for the final report

Energy Technology Data Exchange (ETDEWEB)

STEEN, F.H.

1998-11-04

This document is the analytical laboratory report for tank 241-S-102 push mode core segments collected between March 5, 1998 and April 2, 1998. The segments were subsampled and analyzed in accordance with the Tank 241-S-102 Retained Gas Sampler System Sampling and Analysis Plan (TSAP) (McCain, 1998), Letter of Instruction for Compatibility Analysis of Samples from Tank 241-S-102 (LOI) (Thompson, 1998) and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO) (Mulkey and Miller, 1998). The analytical results are included in the data summary table (Table 1).

Review of analytical results from the proposed agent disposal facility site, Aberdeen Proving Ground

Energy Technology Data Exchange (ETDEWEB)

Brubaker, K.L.; Reed, L.L.; Myers, S.W.; Shepard, L.T.; Sydelko, T.G.

1997-09-01

Argonne National Laboratory reviewed the analytical results from 57 composite soil samples collected in the Bush River area of Aberdeen Proving Ground, Maryland. A suite of 16 analytical tests involving 11 different SW-846 methods was used to detect a wide range of organic and inorganic contaminants. One method (BTEX) was considered redundant, and two {open_quotes}single-number{close_quotes} methods (TPH and TOX) were found to lack the required specificity to yield unambiguous results, especially in a preliminary investigation. Volatile analytes detected at the site include 1, 1,2,2-tetrachloroethane, trichloroethylene, and tetrachloroethylene, all of which probably represent residual site contamination from past activities. Other volatile analytes detected include toluene, tridecane, methylene chloride, and trichlorofluoromethane. These compounds are probably not associated with site contamination but likely represent cross-contamination or, in the case of tridecane, a naturally occurring material. Semivolatile analytes detected include three different phthalates and low part-per-billion amounts of the pesticide DDT and its degradation product DDE. The pesticide could represent residual site contamination from past activities, and the phthalates are likely due, in part, to cross-contamination during sample handling. A number of high-molecular-weight hydrocarbons and hydrocarbon derivatives were detected and were probably naturally occurring compounds. 4 refs., 1 fig., 8 tabs.

Load Carrying Capacity of Metal Dowel Type Connections of Timber Structures

Science.gov (United States)

Gocál, Jozef

2014-12-01

This paper deals with the load-carrying capacity calculation of laterally loaded metal dowel type connections according to Eurocode 5. It is based on analytically derived, relatively complicated mathematical relationships, and thus it can be quite laborious for practical use. The aim is to propose a possible simplification of the calculation. Due to quite a great variability of fasteners' types and the connection arrangements, the attention is paid to the most commonly used nailed connections. There was performed quite an extensive parametric study focused on the calculation of load-carrying capacity of the simple shear and double shear plane nail connections, joining two or three timber parts of softwood or hardwood. Based on the study results, in conclusion there are presented simplifying recommendations for practical design.

Measuring myokines with cardiovascular functions: pre-analytical variables affecting the analytical output.

Science.gov (United States)

Lombardi, Giovanni; Sansoni, Veronica; Banfi, Giuseppe

2017-08-01

In the last few years, a growing number of molecules have been associated to an endocrine function of the skeletal muscle. Circulating myokine levels, in turn, have been associated with several pathophysiological conditions including the cardiovascular ones. However, data from different studies are often not completely comparable or even discordant. This would be due, at least in part, to the whole set of situations related to the preparation of the patient prior to blood sampling, blood sampling procedure, processing and/or store. This entire process constitutes the pre-analytical phase. The importance of the pre-analytical phase is often not considered. However, in routine diagnostics, the 70% of the errors are in this phase. Moreover, errors during the pre-analytical phase are carried over in the analytical phase and affects the final output. In research, for example, when samples are collected over a long time and by different laboratories, a standardized procedure for sample collecting and the correct procedure for sample storage are acknowledged. In this review, we discuss the pre-analytical variables potentially affecting the measurement of myokines with cardiovascular functions.

Jet substructure with analytical methods

Energy Technology Data Exchange (ETDEWEB)

Dasgupta, Mrinal [University of Manchester, Consortium for Fundamental Physics, School of Physics and Astronomy, Manchester (United Kingdom); Fregoso, Alessandro; Powling, Alexander [University of Manchester, School of Physics and Astronomy, Manchester (United Kingdom); Marzani, Simone [Durham University, Institute for Particle Physics Phenomenology, Durham (United Kingdom)

2013-11-15

We consider the mass distribution of QCD jets after the application of jet-substructure methods, specifically the mass-drop tagger, pruning, trimming and their variants. In contrast to most current studies employing Monte Carlo methods, we carry out analytical calculations at the next-to-leading order level, which are sufficient to extract the dominant logarithmic behaviour for each technique, and compare our findings to exact fixed-order results. Our results should ultimately lead to a better understanding of these jet-substructure methods which in turn will influence the development of future substructure tools for LHC phenomenology. (orig.)

Analytic results for planar three-loop integrals for massive form factors

Energy Technology Data Exchange (ETDEWEB)

Henn, Johannes M. [PRISMA Cluster of Excellence, Johannes Gutenberg Universität Mainz,55099 Mainz (Germany); Kavli Institute for Theoretical Physics, UC Santa Barbara,Santa Barbara (United States); Smirnov, Alexander V. [Research Computing Center, Moscow State University,119992 Moscow (Russian Federation); Smirnov, Vladimir A. [Skobeltsyn Institute of Nuclear Physics of Moscow State University,119992 Moscow (Russian Federation); Institut für Theoretische Teilchenphysik, Karlsruhe Institute of Technology (KIT),76128 Karlsruhe (Germany)

2016-12-28

We use the method of differential equations to analytically evaluate all planar three-loop Feynman integrals relevant for form factor calculations involving massive particles. Our results for ninety master integrals at general q{sup 2} are expressed in terms of multiple polylogarithms, and results for fiftyone master integrals at the threshold q{sup 2}=4m{sup 2} are expressed in terms of multiple polylogarithms of argument one, with indices equal to zero or to a sixth root of unity.

Tank 241-T-203, core 190 analytical results for the final report

International Nuclear Information System (INIS)

Steen, F.H.

1997-01-01

This document is the analytical laboratory report for tank 241-T-203 push mode core segments collected on April 17, 1997 and April 18, 1997. The segments were subsainpled and analyzed in accordance with the Tank 241-T-203 Push Mode Core Sampling andanalysis Plan (TSAP) (Schreiber, 1997a), the Safety Screening Data Quality Objective (DQO)(Dukelow, et al., 1995) and Leffer oflnstructionfor Core Sample Analysis of Tanks 241-T-201, 241-T-202, 241-T-203, and 241-T-204 (LOI)(Hall, 1997). The analytical results are included in the data summary report (Table 1). None of the samples submitted for Differential Scanning Calorimetry (DSC), Total Alpha Activity (AT) and Total Organic Carbon (TOC) exceeded notification limits as stated in the TSAP (Schreiber, 1997a). The statistical results of the 95% confidence interval on the mean calculations are provided by the Tank Waste Remediation Systems (TWRS) Technical Basis Group in accordance with the Memorandum of Understanding (Schreiber, 1997b) and not considered in this report

Collaborative data analytics for smart buildings: opportunities and models

DEFF Research Database (Denmark)

Lazarova-Molnar, Sanja; Mohamed, Nader

2018-01-01

of collaborative data analytics for smart buildings, its benefits, as well as presently possible models of carrying it out. Furthermore, we present a framework for collaborative fault detection and diagnosis as a case of collaborative data analytics for smart buildings. We also provide a preliminary analysis...... of the energy efficiency benefit of such collaborative framework for smart buildings. The result shows that significant energy savings can be achieved for smart buildings using collaborative data analytics.......Smart buildings equipped with state-of-the-art sensors and meters are becoming more common. Large quantities of data are being collected by these devices. For a single building to benefit from its own collected data, it will need to wait for a long time to collect sufficient data to build accurate...

Deployment of Analytics into the Healthcare Safety Net: Lessons Learned.

Science.gov (United States)

Hartzband, David; Jacobs, Feygele

2016-01-01

As payment reforms shift healthcare reimbursement toward value-based payment programs, providers need the capability to work with data of greater complexity, scope and scale. This will in many instances necessitate a change in understanding of the value of data, and the types of data needed for analysis to support operations and clinical practice. It will also require the deployment of different infrastructure and analytic tools. Community health centers, which serve more than 25 million people and together form the nation's largest single source of primary care for medically underserved communities and populations, are expanding and will need to optimize their capacity to leverage data as new payer and organizational models emerge. To better understand existing capacity and help organizations plan for the strategic and expanded uses of data, a project was initiated that deployed contemporary, Hadoop-based, analytic technology into several multi-site community health centers (CHCs) and a primary care association (PCA) with an affiliated data warehouse supporting health centers across the state. An initial data quality exercise was carried out after deployment, in which a number of analytic queries were executed using both the existing electronic health record (EHR) applications and in parallel, the analytic stack. Each organization carried out the EHR analysis using the definitions typically applied for routine reporting. The analysis deploying the analytic stack was carried out using those common definitions established for the Uniform Data System (UDS) by the Health Resources and Service Administration. 1 In addition, interviews with health center leadership and staff were completed to understand the context for the findings. The analysis uncovered many challenges and inconsistencies with respect to the definition of core terms (patient, encounter, etc.), data formatting, and missing, incorrect and unavailable data. At a population level, apparent underreporting

Tank 214-AW-105, grab samples, analytical results for the final report

International Nuclear Information System (INIS)

Esch, R.A.

1997-01-01

This document is the final report for tank 241-AW-105 grab samples. Twenty grabs samples were collected from risers 10A and 15A on August 20 and 21, 1996, of which eight were designated for the K Basin sludge compatibility and mixing studies. This document presents the analytical results for the remaining twelve samples. Analyses were performed in accordance with the Compatibility Grab Sampling and Analysis Plan (TSAP) and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DO). The results for the previous sampling of this tank were reported in WHC-SD-WM-DP-149, Rev. 0, 60-Day Waste Compatibility Safety Issue and Final Results for Tank 241-A W-105, Grab Samples 5A W-95-1, 5A W-95-2 and 5A W-95-3. Three supernate samples exceeded the TOC notification limit (30,000 microg C/g dry weight). Appropriate notifications were made. No immediate notifications were required for any other analyte. The TSAP requested analyses for polychlorinated biphenyls (PCB) for all liquids and centrifuged solid subsamples. The PCB analysis of the liquid samples has been delayed and will be presented in a revision to this document

33 CFR 385.33 - Revisions to models and analytical tools.

Science.gov (United States)

2010-07-01

... on a case-by-case basis what documentation is appropriate for revisions to models and analytic tools... analytical tools. 385.33 Section 385.33 Navigation and Navigable Waters CORPS OF ENGINEERS, DEPARTMENT OF THE... Incorporating New Information Into the Plan § 385.33 Revisions to models and analytical tools. (a) In carrying...

Analytical results for entanglement in the five-qubit anisotropic Heisenberg model

International Nuclear Information System (INIS)

Wang Xiaoguang

2004-01-01

We solve the eigenvalue problem of the five-qubit anisotropic Heisenberg model, without use of Bethe's ansatz, and give analytical results for entanglement and mixedness of two nearest-neighbor qubits. The entanglement takes its maximum at Δ=1 (Δ>1) for the case of zero (finite) temperature with Δ being the anisotropic parameter. In contrast, the mixedness takes its minimum at Δ=1 (Δ>1) for the case of zero (finite) temperature

Analytical study on the determination of boron in environmental water samples

International Nuclear Information System (INIS)

Lopez, F.J.; Gimenez, E.; Hernandez, F.

1993-01-01

An analytical study on the determination of boron in environmental water samples was carried out. The curcumin and carmine standard methods were compared with the most recent Azomethine-H method in order to evaluate their analytical characteristics and feasibility for the analysis of boron in water samples. Analyses of synthetic water, ground water, sea water and waste water samples were carried out and a statistical evaluation of the results was made. The Azomethine-H method was found to be the most sensitive (detection limit 0.02 mg l -1 ) and selective (no interference of commonly occurring ions in water was observed), showing also the best precision (relative standard deviation lower than 4%). Moreover, it gave good results for all types of samples analyzed. The accuracy of this method was tested by the addition of known amounts of standard solutions to different types of water samples. The slopes of standard additions and direct calibration graphs were similar and recoveries of added boron ranged from 99 to 107%. (orig.)

Complex dynamics of memristive circuits: Analytical results and universal slow relaxation

Science.gov (United States)

Caravelli, F.; Traversa, F. L.; Di Ventra, M.

2017-02-01

Networks with memristive elements (resistors with memory) are being explored for a variety of applications ranging from unconventional computing to models of the brain. However, analytical results that highlight the role of the graph connectivity on the memory dynamics are still few, thus limiting our understanding of these important dynamical systems. In this paper, we derive an exact matrix equation of motion that takes into account all the network constraints of a purely memristive circuit, and we employ it to derive analytical results regarding its relaxation properties. We are able to describe the memory evolution in terms of orthogonal projection operators onto the subspace of fundamental loop space of the underlying circuit. This orthogonal projection explicitly reveals the coupling between the spatial and temporal sectors of the memristive circuits and compactly describes the circuit topology. For the case of disordered graphs, we are able to explain the emergence of a power-law relaxation as a superposition of exponential relaxation times with a broad range of scales using random matrices. This power law is also universal, namely independent of the topology of the underlying graph but dependent only on the density of loops. In the case of circuits subject to alternating voltage instead, we are able to obtain an approximate solution of the dynamics, which is tested against a specific network topology. These results suggest a much richer dynamics of memristive networks than previously considered.

Study of a vibrating plate: comparison between experimental (ESPI) and analytical results

Science.gov (United States)

Romero, G.; Alvarez, L.; Alanís, E.; Nallim, L.; Grossi, R.

2003-07-01

Real-time electronic speckle pattern interferometry (ESPI) was used for tuning and visualization of natural frequencies of a trapezoidal plate. The plate was excited to resonant vibration by a sinusoidal acoustical source, which provided a continuous range of audio frequencies. Fringe patterns produced during the time-average recording of the vibrating plate—corresponding to several resonant frequencies—were registered. From these interferograms, calculations of vibrational amplitudes by means of zero-order Bessel functions were performed in some particular cases. The system was also studied analytically. The analytical approach developed is based on the Rayleigh-Ritz method and on the use of non-orthogonal right triangular co-ordinates. The deflection of the plate is approximated by a set of beam characteristic orthogonal polynomials generated by using the Gram-Schmidt procedure. A high degree of correlation between computational analysis and experimental results was observed.

Practical approach to a procedure for judging the results of analytical verification measurements

International Nuclear Information System (INIS)

Beyrich, W.; Spannagel, G.

1979-01-01

For practical safeguards a particularly transparent procedure is described to judge analytical differences between declared and verified values based on experimental data relevant to the actual status of the measurement technique concerned. Essentially it consists of two parts: Derivation of distribution curves for the occurrence of interlaboratory differences from the results of analytical intercomparison programmes; and judging of observed differences using criteria established on the basis of these probability curves. By courtesy of the Euratom Safeguards Directorate, Luxembourg, the applicability of this judging procedure has been checked in practical data verification for safeguarding; the experience gained was encouraging and implementation of the method is intended. Its reliability might be improved further by evaluation of additional experimental data. (author)

State-of-the-Art of (Bio)Chemical Sensor Developments in Analytical Spanish Groups

Science.gov (United States)

Plata, María Reyes; Contento, Ana María; Ríos, Angel

2010-01-01

(Bio)chemical sensors are one of the most exciting fields in analytical chemistry today. The development of these analytical devices simplifies and miniaturizes the whole analytical process. Although the initial expectation of the massive incorporation of sensors in routine analytical work has been truncated to some extent, in many other cases analytical methods based on sensor technology have solved important analytical problems. Many research groups are working in this field world-wide, reporting interesting results so far. Modestly, Spanish researchers have contributed to these recent developments. In this review, we summarize the more representative achievements carried out for these groups. They cover a wide variety of sensors, including optical, electrochemical, piezoelectric or electro-mechanical devices, used for laboratory or field analyses. The capabilities to be used in different applied areas are also critically discussed. PMID:22319260

Analytic results for asymmetric random walk with exponential transition probabilities

International Nuclear Information System (INIS)

Gutkowicz-Krusin, D.; Procaccia, I.; Ross, J.

1978-01-01

We present here exact analytic results for a random walk on a one-dimensional lattice with asymmetric, exponentially distributed jump probabilities. We derive the generating functions of such a walk for a perfect lattice and for a lattice with absorbing boundaries. We obtain solutions for some interesting moment properties, such as mean first passage time, drift velocity, dispersion, and branching ratio for absorption. The symmetric exponential walk is solved as a special case. The scaling of the mean first passage time with the size of the system for the exponentially distributed walk is determined by the symmetry and is independent of the range

An analytical model for backscattered luminance in fog: comparisons with Monte Carlo computations and experimental results

International Nuclear Information System (INIS)

Taillade, Frédéric; Dumont, Eric; Belin, Etienne

2008-01-01

We propose an analytical model for backscattered luminance in fog and derive an expression for the visibility signal-to-noise ratio as a function of meteorological visibility distance. The model uses single scattering processes. It is based on the Mie theory and the geometry of the optical device (emitter and receiver). In particular, we present an overlap function and take the phase function of fog into account. The results of the backscattered luminance obtained with our analytical model are compared to simulations made using the Monte Carlo method based on multiple scattering processes. An excellent agreement is found in that the discrepancy between the results is smaller than the Monte Carlo standard uncertainties. If we take no account of the geometry of the optical device, the results of the model-estimated backscattered luminance differ from the simulations by a factor 20. We also conclude that the signal-to-noise ratio computed with the Monte Carlo method and our analytical model is in good agreement with experimental results since the mean difference between the calculations and experimental measurements is smaller than the experimental uncertainty

Rigorous results of low-energy models of the analytic S-matrix theory

International Nuclear Information System (INIS)

Meshcheryakov, V.A.

1974-01-01

Results of analytic S-matrix theory, mainly dealing with the static limit of dispersion relations, are applied to pion-nucleon scattering in the low-energy region. Various approaches to solving equations of the chew-Low type are discussed. It is concluded that interesting results are obtained by reducing the equations to a system of nonlinear difference equations; the crucial element of this approach being the study of functions on the whole Riemann surface. Boundary and crossing symmetry conditions are studied. (HFdV)

Analytic result for the two-loop six-point NMHV amplitude in N=4 super Yang-Mills theory

CERN Document Server

Dixon, Lance J.; Henn, Johannes M.

2012-01-01

We provide a simple analytic formula for the two-loop six-point ratio function of planar N = 4 super Yang-Mills theory. This result extends the analytic knowledge of multi-loop six-point amplitudes beyond those with maximal helicity violation. We make a natural ansatz for the symbols of the relevant functions appearing in the two-loop amplitude, and impose various consistency conditions, including symmetry, the absence of spurious poles, the correct collinear behaviour, and agreement with the operator product expansion for light-like (super) Wilson loops. This information reduces the ansatz to a small number of relatively simple functions. In order to fix these parameters uniquely, we utilize an explicit representation of the amplitude in terms of loop integrals that can be evaluated analytically in various kinematic limits. The final compact analytic result is expressed in terms of classical polylogarithms, whose arguments are rational functions of the dual conformal cross-ratios, plus precisely two function...

Search Analytics for Your Site

CERN Document Server

Rosenfeld, Louis

2011-01-01

Any organization that has a searchable web site or intranet is sitting on top of hugely valuable and usually under-exploited data: logs that capture what users are searching for, how often each query was searched, and how many results each query retrieved. Search queries are gold: they are real data that show us exactly what users are searching for in their own words. This book shows you how to use search analytics to carry on a conversation with your customers: listen to and understand their needs, and improve your content, navigation and search performance to meet those needs.

Analytical Framework for End-to-End Delay Based on Unidirectional Highway Scenario

Directory of Open Access Journals (Sweden)

Aslinda Hassan

2015-01-01

Full Text Available In a sparse vehicular ad hoc network, a vehicle normally employs a carry and forward approach, where it holds the message it wants to transmit until the vehicle meets other vehicles or roadside units. A number of analyses in the literature have been done to investigate the time delay when packets are being carried by vehicles on both unidirectional and bidirectional highways. However, these analyses are focusing on the delay between either two disconnected vehicles or two disconnected vehicle clusters. Furthermore, majority of the analyses only concentrate on the expected value of the end-to-end delay when the carry and forward approach is used. Using regression analysis, we establish the distribution model for the time delay between two disconnected vehicle clusters as an exponential distribution. Consequently, a distribution is newly derived to represent the number of clusters on a highway using a vehicular traffic model. From there, we are able to formulate end-to-end delay model which extends the time delay model for two disconnected vehicle clusters to multiple disconnected clusters on a unidirectional highway. The analytical results obtained from the analytical model are then validated through simulation results.

On the Behaviour of Current-Carrying Wire-Conductors and Bucking of a Column

DEFF Research Database (Denmark)

Ganji, S. S.; Barari, Amin; Fereidoon, A.

2013-01-01

This paper applies approximate analytical methods namely Iteration Perturbation Method (IPM), variational approach (VA) and Parameter Expanding Method (PEM) to Single-Degree-Of-Freedom (SDOF) nonlinear oscillation systems. Some numerical cases as dynamic behavior of current-carrying wire-conductors...

Path integral analysis of Jarzynski's equality: Analytical results

Science.gov (United States)

Minh, David D. L.; Adib, Artur B.

2009-02-01

We apply path integrals to study nonequilibrium work theorems in the context of Brownian dynamics, deriving in particular the equations of motion governing the most typical and most dominant trajectories. For the analytically soluble cases of a moving harmonic potential and a harmonic oscillator with a time-dependent natural frequency, we find such trajectories, evaluate the work-weighted propagators, and validate Jarzynski’s equality.

Carry

DEFF Research Database (Denmark)

Koijen, Ralph S.J.; Moskowitz, Tobias J.; Heje Pedersen, Lasse

that include global equities, global bonds, currencies, commodities, US Treasuries, credit, and equity index options. This predictability underlies the strong returns to "carry trades" that go long high-carry and short low-carry securities, applied almost exclusively to currencies, but shown here...

New analytical results in the electromagnetic response of composite superconducting wire in parallel fields

NARCIS (Netherlands)

Niessen, E.M.J.; Niessen, E.M.J.; Zandbergen, P.J.

1993-01-01

Analytical results are presented concerning the electromagnetic response of a composite superconducting wire in fields parallel to the wire axis, using the Maxwell equations supplemented with constitutive equations. The problem is nonlinear due to the nonlinearity in the constitutive equation

Kawerau fluid chemistry : analytical results

International Nuclear Information System (INIS)

Mroczek, E.K.; Christenson, B.W.; Mountain, B.; Stewart, M.K.

2001-01-01

This report summarises the water and gas analytical data collected from Kawerau geothermal field 1998-2000 under the Sustainable Management of Geothermal and Mineral Resources (GMR) Project, Objective 2 'Understanding New Zealand Geothermal Systems'. The work is part of the continuing effort to characterise the chemical, thermal and isotopic signatures of the deep magmatic heat sources which drive our geothermal systems. At Kawerau there is clear indication that the present-day heat source relates to young volcanism within the field. However, being at the margins of the explored reservoir, little is presently known of the characteristics of that heat source. The Kawerau study follows on directly from the recently completed work characterising the geochemical signatures of the Ohaaki hydrothermal system. In the latter study the interpretation of the radiogenic noble gas isotope systematics was of fundamental importance in characterising the magmatic heat source. Unfortunately the collaboration with LLNL, which analysed the isotopes, could not be extended to include the Kawerau data. The gas samples have been archived and will be analysed once a new collaborator is found to continue the work. The purpose of the present compilation is to facilitate the final completion of the study by ensuring the data is accessible in one report. (author). 5 refs., 2 figs., 9 tabs

Evaluation of instrumental parameters for obtaining acceptable analytical results of the Dosimetry Laboratory of Chemistry of the Regional Center of Nuclear Sciences, CNEN-NE, Recife, Brazil

International Nuclear Information System (INIS)

Souza, V.L.B.; Figueiredo, M.D.C.; Cunha, M.S.

2008-01-01

Instrumental parameters need to be evaluated for obtaining acceptable analytical results for a specific instrument. The performance of the UV-VIS spectrophotometer can be verified for wavelengths and absorbances with appropriate materials (solutions of different concentrations of K 2 CrO 4 , for example). The aim of this work was to demonstrate the results of the procedures to control the quality of the measurements carried out in the laboratory in the last four years. The samples were analyzed in the spectrophotometer and control graphics were obtained for K 2 CrO 4 and Fe 3+ absorbance values. The variation in the results obtained for the stability of the spectrophotometer and for the control of its calibration did not exceed 2%. (author)

Analytic results for the one loop NMHV H anti qqgg amplitude

International Nuclear Information System (INIS)

Badger, Simon; Campbell, John M.; Williams, Ciaran

2009-01-01

We compute the one-loop amplitude for a Higgs boson, a quark-antiquark pair and a pair of gluons of negative helicity, i.e. for the next-to-maximally helicity violating (NMHV) case, A(H, 1 - anti q , 2 + q , 3 - g , 4 - g ). The calculation is performed using an effective Lagrangian which is valid in the limit of very large top quark mass. As a result of this paper all amplitudes for the transition of a Higgs boson into 4 partons are now known analytically at one-loop order. (orig.)

Evaluation of analytical results on DOE Quality Assessment Program Samples

International Nuclear Information System (INIS)

Jaquish, R.E.; Kinnison, R.R.; Mathur, S.P.; Sastry, R.

1985-01-01

Criteria were developed for evaluating the participants analytical results in the DOE Quality Assessment Program (QAP). Historical data from previous QAP studies were analyzed using descriptive statistical methods to determine the interlaboratory precision that had been attained. Performance criteria used in other similar programs were also reviewed. Using these data, precision values and control limits were recommended for each type of analysis performed in the QA program. Results of the analysis performed by the QAP participants on the November 1983 samples were statistically analyzed and evaluated. The Environmental Measurements Laboratory (EML) values were used as the known values and 3-sigma precision values were used as control limits. Results were submitted by 26 participating laboratories for 49 different radionuclide media combinations. The participants reported 419 results and of these, 350 or 84% were within control limits. Special attention was given to the data from gamma spectral analysis of air filters and water samples. both normal probability and box plots were prepared for each nuclide to help evaluate the distribution of the data. Results that were outside the expected range were identified and suggestions made that laboratories check calculations, and procedures on these results

Analytical Determining Of The Steinmetz Equivalent Diagram Elements Of Single-Phase Transformer

Directory of Open Access Journals (Sweden)

T. Aly Saandy

2015-08-01

Full Text Available This article presents to an analytical calculation methodology of the Steinmetz Equivalent Diagram Elements applied to the prediction of Eddy current loss in a single-phase transformer. Based on the electrical circuit theory the active and reactive powers consumed by the core are expressed analytically in function of the electromagnetic parameters as resistivity permeability and the geometrical dimensions of the core. The proposed modeling approach is established with the duality parallel series. The equivalent diagram elements empirically determined by Steinmetz are analytically expressed using the expressions of the no loaded transformer consumptions. To verify the relevance of the model validations both by simulations with different powers and measurements were carried out to determine the resistance and reactance of the core. The obtained results are in good agreement with the theoretical approach and the practical results.

The IAEA's programme in analytical quality control

International Nuclear Information System (INIS)

Suschny, O.

1980-10-01

The purpose of the Analytical Quality Control Programme of the International Atomic Energy Agency is to help laboratories in the Agency's Member States to assess and, if necessary, to improve the reliability of their analytical work in areas related to nuclear technology and radioisotope utilisation. This is done by the organisation of analytical intercomparisons and by the provision of certified or uncertified reference materials. Recently intercomparisons have been organised of trace element analysis in a soil and a lake sediment sample which have led to the certification of two new reference materials, SOIL-5 and SL-1 (lake sediment). A technique has been developed to recognise and to remove outlying results. Criteria have been established to classify element-concentration values into the categories ''established with a high degree of confidence'', ''established with a reasonable degree of confidence'' and ''information value only''. Four radionuclide intercomparisons have recently been carried out: W-1/1 and W-2/1 of the determination of selected radionuclides in water and Air-1/1 and Air-2/1 of that of selected radionuclides on simulated air filters. Details of the preparation of materials for these intercomparisons, and of data treatment and some results are discussed in the paper

Tank 241-AN-104, cores 163 and 164 analytical results for the final report

International Nuclear Information System (INIS)

Steen, F.H.

1997-01-01

This document is the analytical laboratory report for tank 241-AN-104 push mode core segments collected between August 8, 1996 and September 12, 1996. The segments were subsampled and analyzed in accordance with the Tank 241-AAr-1 04 Push Mode Core Sampling and Analysis Plan (TSAP) (Winkelman, 1996), the Safety Screening Data Quality Objective (DQO) (Dukelow, et at., 1995) and the Flammable Gas Data Quality Objective (DQO) (Benar, 1995). The analytical results are included in a data summary table. None of the samples submitted for Differential Scanning Calorimetry (DSC), Total Alpha Activity (AT), Total Organic Carbon (TOC) and Plutonium analyses (239,240 Pu) exceeded notification limits as stated in the TSAP. The statistical results of the 95% confidence interval on the mean calculations are provided by the Tank Waste Remediation Systems Technical Basis Group in accordance with the Memorandum of Understanding (Schreiber, 1997) and not considered in this report

Analytical Chemistry Division annual progress report for period ending December 31, 1990

Energy Technology Data Exchange (ETDEWEB)

1991-04-01

The Analytical Chemistry Division has programs in inorganic mass spectrometry, optical spectroscopy, organic mass spectrometry, and secondary ion mass spectrometry. It maintains a transuranium analytical laboratory and an environmental analytical laboratory. It carries out chemical and physical analysis in the fields of inorganic chemistry, organic spectroscopy, separations and synthesis. (WET)

Process and results of analytical framework and typology development for POINT

DEFF Research Database (Denmark)

Gudmundsson, Henrik; Lehtonen, Markku; Bauler, Tom

2009-01-01

POINT is a project about how indicators are used in practice; to what extent and in what way indicators actually influence, support, or hinder policy and decision making processes, and what could be done to enhance the positive role of indicators in such processes. The project needs an analytical......, a set of core concepts and associated typologies, a series of analytic schemes proposed, and a number of research propositions and questions for the subsequent empirical work in POINT....

Analytical results for non-Hermitian parity–time-symmetric and ...

Indian Academy of Sciences (India)

Abstract. We investigate both the non-Hermitian parity–time-(PT-)symmetric and Hermitian asymmetric volcano potentials, and present the analytical solution in terms of the confluent Heun function. Under certain special conditions, the confluent Heun function can be terminated as a polynomial, thereby leading to certain ...

An analytical method of estimating Value-at-Risk on the Belgrade Stock Exchange

Directory of Open Access Journals (Sweden)

Obadović Milica D.

2009-01-01

Full Text Available This paper presents market risk evaluation for a portfolio consisting of shares that are continuously traded on the Belgrade Stock Exchange, by applying the Value-at-Risk model - the analytical method. It describes the manner of analytical method application and compares the results obtained by implementing this method at different confidence levels. Method verification was carried out on the basis of the failure rate that demonstrated the confidence level for which this method was acceptable in view of the given conditions.

Analysis of Load-Carrying Capacity for Redundant Free-Floating Space Manipulators in Trajectory Tracking Task

Directory of Open Access Journals (Sweden)

Qingxuan Jia

2014-01-01

Full Text Available The aim of this paper is to analyze load-carrying capacity of redundant free-floating space manipulators (FFSM in trajectory tracking task. Combined with the analysis of influential factors in load-carrying process, evaluation of maximum load-carrying capacity (MLCC is described as multiconstrained nonlinear programming problem. An efficient algorithm based on repeated line search within discontinuous feasible region is presented to determine MLCC for a given trajectory of the end-effector and corresponding joint path. Then, considering the influence of MLCC caused by different initial configurations for the starting point of given trajectory, a kind of maximum payload initial configuration planning method is proposed by using PSO algorithm. Simulations are performed for a particular trajectory tracking task of the 7-DOF space manipulator, of which MLCC is evaluated quantitatively. By in-depth research of the simulation results, significant gap between the values of MLCC when using different initial configurations is analyzed, and the discontinuity of allowable load-carrying capacity is illustrated. The proposed analytical method can be taken as theoretical foundation of feasibility analysis, trajectory optimization, and optimal control of trajectory tracking task in on-orbit load-carrying operations.

Synthesis of the safety studies carried out on the GFR2400

Energy Technology Data Exchange (ETDEWEB)

Bertrand, F., E-mail: frederic.bertrand@cea.fr [CEA, DEN, DER, F-13108, Saint Paul-lez-Durance (France); Bassi, C. [CEA, DEN, DER, F-13108, Saint Paul-lez-Durance (France); Bentivoglio, F. [CEA, DEN, DM2S, F-38054, Grenoble (France); Audubert, F. [CEA, DEN, DEC, F-13108, Saint Paul-lez-Durance (France); Gueneau, C. [CEA, DEN, DPC, F-91191, Gif-sur-yvette (France); Rimpault, G. [CEA, DEN, DER, F-13108, Saint Paul-lez-Durance (France); Journeau, C. [CEA, DEN, DTN, F-13108, Saint Paul-lez-Durance (France)

2012-12-15

been preliminarily shown in several particularly challenging situations (loss of active means, unprotected transients, full depressurization). Finally, preliminary results regarding analytical studies carried out on phenomena involved in GFR2400 core degradation (physico-chemistry and neutron physics) are presented. Then, the application of the separate results aforementioned by considering results of analytical simplified thermalhydraulic calculations and of system calculations (carried out with the CATHARE2 code) have enabled a preliminary assessment of GFR2400 behaviour in case of core degradation. For some cases, such applications permitted to conclude on the problematic/begnin issue of a phenomenon (like air ingress in realistic scenarios) whereas in other cases, those applications have illustrated that more complex calculation tools coupling the various phenomena are necessary (like effects of water ingress for instance) as well as semi-integral experiments reproducing a fuel assembly degradation.

Comparison of EPRI safety valve test data with analytically determined hydraulic results

International Nuclear Information System (INIS)

Smith, L.C.; Howe, K.S.

1983-01-01

NUREG-0737 (November 1980) and all subsequent U.S. NRC generic follow-up letters require that all operating plant licensees and applicants verify the acceptability of plant specific pressurizer safety valve piping systems for valve operation transients by testing. To aid in this verification process, the Electric Power Research Institute (EPRI) conducted an extensive testing program at the Combustion Engineering Test Facility. Pertinent tests simulating dynamic opening of the safety valves for representative upstream environments were carried out. Different models and sizes of safety valves were tested at the simulated operating conditions. Transducers placed at key points in the system monitored a variety of thermal, hydraulic and structural parameters. From this data, a more complete description of the transient can be made. The EPRI test configuration was analytically modeled using a one-dimensional thermal hydraulic computer program that uses the method of characteristics approach to generate key fluid parameters as a function of space and time. The conservative equations are solved by applying both the implicit and explicit characteristic methods. Unbalanced or wave forces were determined for each straight run of pipe bounded on each side by a turn or elbow. Blowdown forces were included, where appropriate. Several parameters were varied to determine the effects on the pressure, hydraulic forces and timings of events. By comparing these quantities with the experimentally obtained data, an approximate picture of the flow dynamics is arrived at. Two cases in particular are presented. These are the hot and cold loop seal discharge tests made with the Crosby 6M6 spring-loaded safety valve. Included in the paper is a description of the hydraulic code, modeling techniques and assumptions, a comparison of the numerical results with experimental data and a qualitative description of the factors which govern pipe support loading. (orig.)

Pre-analytical and post-analytical evaluation in the era of molecular diagnosis of sexually transmitted diseases: cellularity control and internal control

Directory of Open Access Journals (Sweden)

Loria Bianchi

2014-06-01

Full Text Available Background. Increase of molecular tests performed on DNA extracted from various biological materials should not be carried out without an adequate standardization of the pre-analytical and post-analytical phase. Materials and Methods. Aim of this study was to evaluate the role of internal control (IC to standardize pre-analytical phase and the role of cellularity control (CC in the suitability evaluation of biological matrices, and their influence on false negative results. 120 cervical swabs (CS were pre-treated and extracted following 3 different protocols. Extraction performance was evaluated by amplification of: IC, added in each mix extraction; human gene HPRT1 (CC with RT-PCR to quantify sample cellularity; L1 region of HPV with SPF10 primers. 135 urine, 135 urethral swabs, 553 CS and 332 ThinPrep swabs (TP were tested for C. trachomatis (CT and U. parvum (UP with RT-PCR and for HPV by endpoint-PCR. Samples were also tested for cellularity. Results. Extraction protocol with highest average cellularity (Ac/sample showed lowest number of samples with inhibitors; highest HPV positivity was achieved by protocol with greatest Ac/PCR. CS and TP under 300.000 cells/sample showed a significant decrease of UP (P<0.01 and HPV (P<0.005 positivity. Female urine under 40.000 cells/mL were inadequate to detect UP (P<0.05. Conclusions. Our data show that IC and CC allow optimization of pre-analytical phase, with an increase of analytical quality. Cellularity/sample allows better sample adequacy evaluation, crucial to avoid false negative results, while cellularity/PCR allows better optimization of PCR amplification. Further data are required to define the optimal cut-off for result normalization.

Evaluation of the quality of results obtained in institutions participating in interlaboratory experiments and of the reliability characteristics of the analytical methods used on the basis of certification of standard soil samples

Energy Technology Data Exchange (ETDEWEB)

Parshin, A.K.; Obol' yaninova, V.G.; Sul' dina, N.P.

1986-08-20

Rapid monitoring of the level of pollution of the environment and, especially, of soils necessitates preparation of standard samples (SS) close in properties and material composition to the objects to be analyzed. During 1978-1982 four sets (three types of samples in each) of State Standard Samples of different soils were developed: soddy-podzolic sandy-loamy, typical chernozem, krasnozem, and calcareous sierozem. The certification studies of the SS of the soils were carried out in accordance with the classical scheme of interlab experiment (ILE). More than 100 institutions were involved in the ILE and the total number of independent analytical results was of the order of 10/sup 4/. With such a volume of analytical information at their disposal they were able to find some general characteristics intrinsic to certification studies, to assess the quality of work of the ILE participants with due regard for their specialization, and the reliability characteristics of the analytical methods used.

Spatiotemporal Distribution of β-Amyloid in Alzheimer Disease Is the Result of Heterogeneous Regional Carrying Capacities.

Science.gov (United States)

Whittington, Alex; Sharp, David J; Gunn, Roger N

2018-05-01

β-amyloid (Aβ) accumulation in the brain is 1 of 2 pathologic hallmarks of Alzheimer disease (AD), and the spatial distribution of Aβ has been studied extensively ex vivo. Methods: We applied mathematical modeling to Aβ in vivo PET imaging data to investigate competing theories of Aβ spread in AD. Results: Our results provided evidence that Aβ accumulation starts in all brain regions simultaneously and that its spatiotemporal distribution is due to heterogeneous regional carrying capacities (regional maximum possible concentration of Aβ) for the aggregated protein rather than to longer-term spreading from seed regions. Conclusion: The in vivo spatiotemporal distribution of Aβ in AD can be mathematically modeled using a logistic growth model in which the Aβ carrying capacity is heterogeneous across the brain but the exponential growth rate and time of half maximal Aβ concentration are constant. © 2018 by the Society of Nuclear Medicine and Molecular Imaging.

Tank 241-AX-103, cores 212 and 214 analytical results for the final report

International Nuclear Information System (INIS)

Steen, F.H.

1998-01-01

This document is the analytical laboratory report for tank 241-AX-103 push mode core segments collected between July 30, 1997 and August 11, 1997. The segments were subsampled and analyzed in accordance with the Tank 241-AX-103 Push Mode Core Sampling and Analysis Plan (TSAP) (Comer, 1997), the Safety Screening Data Quality Objective (DQO) (Dukelow, et al., 1995) and the Data Quality Objective to Support Resolution of the Organic Complexant Safety Issue (Organic DQO) (Turner, et al., 1995). The analytical results are included in the data summary table (Table 1). None of the samples submitted for Differential Scanning Calorimetry (DSC), Total Alpha Activity (AT), plutonium 239 (Pu239), and Total Organic Carbon (TOC) exceeded notification limits as stated in the TSAP (Conner, 1997). The statistical results of the 95% confidence interval on the mean calculations are provided by the Tank Waste Remediation Systems Technical Basis Group in accordance with the Memorandum of Understanding (Schreiber, 1997) and not considered in this report

Analytic results for the one loop NMHV H anti qqgg amplitude

Energy Technology Data Exchange (ETDEWEB)

Badger, Simon [Deutsches Elektronen-Synchrotron (DESY), Zeuthen (Germany); Campbell, John M. [Glasgow Univ. (United Kingdom). Dept. of Physics and Astronomy; Ellis, R. Keith [Fermilab, Batavia, IL (United States); Williams, Ciaran [Durham Univ. (United Kingdom). Dept. of Physics

2009-10-23

We compute the one-loop amplitude for a Higgs boson, a quark-antiquark pair and a pair of gluons of negative helicity, i.e. for the next-to-maximally helicity violating (NMHV) case, A(H, 1{sup -} {sub anti} {sub q}, 2{sup +}{sub q}, 3{sup -}{sub g}, 4{sup -}{sub g}). The calculation is performed using an effective Lagrangian which is valid in the limit of very large top quark mass. As a result of this paper all amplitudes for the transition of a Higgs boson into 4 partons are now known analytically at one-loop order. (orig.)

Arnol'd tongues for a resonant injection-locked frequency divider: analytical and numerical results

DEFF Research Database (Denmark)

Bartuccelli, Michele; Deane, Jonathan H.B.; Gentile, Guido

2010-01-01

’d tongues in the frequency–amplitude plane. In particular, we provide exact analytical formulae for the widths of the tongues, which correspond to the plateaux of the devil’s staircase picture. The results account for numerical and experimental findings presented in the literature for special driving terms...

Tank 241-TX-118, core 236 analytical results for the final report

International Nuclear Information System (INIS)

ESCH, R.A.

1998-01-01

This document is the analytical laboratory report for tank 241-TX-118 push mode core segments collected between April 1, 1998 and April 13, 1998. The segments were subsampled and analyzed in accordance with the Tank 241-TX-118 Push Mode Core sampling and Analysis Plan (TSAP) (Benar, 1997), the Safety Screening Data Quality Objective (DQO) (Dukelow, et al., 1995), the Data Quality Objective to Support Resolution of the Organic Complexant Safety Issue (Organic DQO) (Turner, et al, 1995) and the Historical Model Evaluation Data Requirements (Historical DQO) (Sipson, et al., 1995). The analytical results are included in the data summary table (Table 1). None of the samples submitted for Differential Scanning Calorimetry (DSC) and Total Organic Carbon (TOC) exceeded notification limits as stated in the TSAP (Benar, 1997). One sample exceeded the Total Alpha Activity (AT) analysis notification limit of 38.4microCi/g (based on a bulk density of 1.6), core 236 segment 1 lower half solids (S98T001524). Appropriate notifications were made. Plutonium 239/240 analysis was requested as a secondary analysis. The statistical results of the 95% confidence interval on the mean calculations are provided by the Tank Waste Remediation Systems Technical Basis Group in accordance with the Memorandum of Understanding (Schreiber, 1997) and are not considered in this report

Global analytic treatment of terrestrial photogrammetric networks

CERN Document Server

Mayoud, M

1980-01-01

In order to solve certain special CERN metrology problems, analytical terrestrial photogrammetry may have some advantages which are first discussed along with their drawbacks and limitations. In this application, it is necessary to carry out a rigorous and global adjustment of the observations and simultaneously process all the perspective ray bundles. The basic principles, the least squares solution and the stochastic analysis of the results are presented. However, for the CERN project, one wonders if the production of digital theodolites is going to reduce the advantages of the photogrammetric method. (12 refs).

Development of CAD implementing the algorithm of boundary elements’ numerical analytical method

Directory of Open Access Journals (Sweden)

Yulia V. Korniyenko

2015-03-01

Full Text Available Up to recent days the algorithms for numerical-analytical boundary elements method had been implemented with programs written in MATLAB environment language. Each program had a local character, i.e. used to solve a particular problem: calculation of beam, frame, arch, etc. Constructing matrices in these programs was carried out “manually” therefore being time-consuming. The research was purposed onto a reasoned choice of programming language for new CAD development, allows to implement algorithm of numerical analytical boundary elements method and to create visualization tools for initial objects and calculation results. Research conducted shows that among wide variety of programming languages the most efficient one for CAD development, employing the numerical analytical boundary elements method algorithm, is the Java language. This language provides tools not only for development of calculating CAD part, but also to build the graphic interface for geometrical models construction and calculated results interpretation.

Bifurcations and Chaos of AN Immersed Cantilever Beam in a Fluid and Carrying AN Intermediate Mass

Science.gov (United States)

AL-QAISIA, A. A.; HAMDAN, M. N.

2002-06-01

The concern of this work is the local stability and period-doubling bifurcations of the response to a transverse harmonic excitation of a slender cantilever beam partially immersed in a fluid and carrying an intermediate lumped mass. The unimodal form of the non-linear dynamic model describing the beam-mass in-plane large-amplitude flexural vibration, which accounts for axial inertia, non-linear curvature and inextensibility condition, developed in Al-Qaisia et al. (2000Shock and Vibration7 , 179-194), is analyzed and studied for the resonance responses of the first three modes of vibration, using two-term harmonic balance method. Then a consistent second order stability analysis of the associated linearized variational equation is carried out using approximate methods to predict the zones of symmetry breaking leading to period-doubling bifurcation and chaos on the resonance response curves. The results of the present work are verified for selected physical system parameters by numerical simulations using methods of the qualitative theory, and good agreement was obtained between the analytical and numerical results. Also, analytical prediction of the period-doubling bifurcation and chaos boundaries obtained using a period-doubling bifurcation criterion proposed in Al-Qaisia and Hamdan (2001 Journal of Sound and Vibration244, 453-479) are compared with those of computer simulations. In addition, results of the effect of fluid density, fluid depth, mass ratio, mass position and damping on the period-doubling bifurcation diagrams are studies and presented.

Consistency of FMEA used in the validation of analytical procedures

DEFF Research Database (Denmark)

Oldenhof, M.T.; van Leeuwen, J.F.; Nauta, Maarten

2011-01-01

is always carried out under the supervision of an experienced FMEA-facilitator and that the FMEA team has at least two members with competence in the analytical method to be validated. However, the FMEAs of both teams contained valuable information that was not identified by the other team, indicating......In order to explore the consistency of the outcome of a Failure Mode and Effects Analysis (FMEA) in the validation of analytical procedures, an FMEA was carried out by two different teams. The two teams applied two separate FMEAs to a High Performance Liquid Chromatography-Diode Array Detection...

Analyticity in a phenomenology of electro-weak structure of hadrons

International Nuclear Information System (INIS)

Dubnicka, S.; Dubnickova, A. Z.

2010-01-01

The utility of an application of the analyticity in a phenomenology of electro-weak structure of hadrons is demonstrated in a number of obtained new and experimentally verifiable results. With this aim first the problem of an inconsistency of the asymptotic behavior of vector-meson-dominance model with the asymptotic behavior of form factors of baryons and nuclei is solved generally and a general approach for determination of the lowest normal and anomalous singularities of form factors from the corresponding Feynman diagrams is reviewed. Then many useful applications by making use of the analytic properties of electro-weak form factors and amplitudes of various electromagnetic processes of hadrons are carried out. (Author)

Analytical results of radiochemistry of the JRR-3M

International Nuclear Information System (INIS)

Yoshijima, Tetsuo; Tanaka, Sumitoshi

1997-07-01

The JRR-3 was modified for upgrading to enhance the experimental capabilities in 1990 as JRR-3M. JRR-3M is pool type research reactor, moderated and cooled by light water with a maximum thermal power of 20 MWt and a thermal neutron flux of about 2x10 14 n/cm 2 ·sec. The core internal structure and fuel cladding tube is made by aluminum alloy. The cooling systems are composed of primary cooling system, secondary cooling system, heavy water reflector system and helium gas system. The primary piping system, reactor pool and heavy water reflector system is constructed of type 304 stainless steel. The main objectives of radiochemistry are check the general corrosion of structural materials and detection of failed fuel elements for safe operation of reactor plant. In this report analytical results of radiochemistry and evaluation of radionuclides of cooling systems in the JRR-3M are described. (author)

Analytical and experimental investigations of magnetohydrodynamic flows near the entrance to a strong magnetic field

International Nuclear Information System (INIS)

Picologlou, B.F.; Reed, C.B.; Dauzvardis, P.V.; Walker, J.S.

1986-01-01

A program of analytical and experimental investigations in MHD flows has been established at Argonne National Lab. (ANL) within the framework of the Blanket Technology Program. An experimental facility for such investigations has been built and is being operated at ANL. The investigations carried out on the Argonne Liquid-Metal engineering EXperiment (ALEX) are complemented by analysis carried out at the Univ. of Illinois. The first phase of the experimental program is devoted to investigations of well-defined cases for which analytical solutions exist. Such testing will allow validation and increased confidence in the theory. Because analytical solutions exist for only a few cases, which do not cover the entire range of anticipated flow behavior, confining testing to these cases will not be an adequate validation of the theory. For this reason, this phase involves testing and a companion analytical effort aimed toward obtaining solutions for a broad range of cases, which, although simple in geometry, are believed to encompass the range of flow phenomena relevant to fusion. This parallel approach is necessary so that analysis will guide and help plan the experiments, whereas the experimental results will provide information needed to validate and/or refine the analysis

Some analytical results for toroidal magnetic field coils with elongated minor cross-sections

International Nuclear Information System (INIS)

Raeder, J.

1976-09-01

The problem of determining the shape of a flexible current filament forming part of an ideal toroidal magnetic field coil is solved in a virtually analytical form. Analytical formulae for characteristic coil dimensions, stored magnetic energies, inductances and forces are derived for the so-called D-coils. The analytically calculated inductances of ideal D-coils are compared with numerically calculated ones for the case of finite numbers of D-shaped current filaments. Finally, the magnetic energies stored in ideal rectangular, elliptic and D-coils are compared. (orig.) [de

Interpretation of results for tumor markers on the basis of analytical imprecision and biological variation

DEFF Research Database (Denmark)

Sölétormos, G; Schiøler, V; Nielsen, D

1993-01-01

Interpretation of results for CA 15.3, carcinoembryonic antigen (CEA), and tissue polypeptide antigen (TPA) during breast cancer monitoring requires data on intra- (CVP) and inter- (CVG) individual biological variation, analytical imprecision (CVA), and indices of individuality. The average CVP...

Analytical quality by design: a tool for regulatory flexibility and robust analytics.

Science.gov (United States)

Peraman, Ramalingam; Bhadraya, Kalva; Padmanabha Reddy, Yiragamreddy

2015-01-01

Very recently, Food and Drug Administration (FDA) has approved a few new drug applications (NDA) with regulatory flexibility for quality by design (QbD) based analytical approach. The concept of QbD applied to analytical method development is known now as AQbD (analytical quality by design). It allows the analytical method for movement within method operable design region (MODR). Unlike current methods, analytical method developed using analytical quality by design (AQbD) approach reduces the number of out-of-trend (OOT) results and out-of-specification (OOS) results due to the robustness of the method within the region. It is a current trend among pharmaceutical industry to implement analytical quality by design (AQbD) in method development process as a part of risk management, pharmaceutical development, and pharmaceutical quality system (ICH Q10). Owing to the lack explanatory reviews, this paper has been communicated to discuss different views of analytical scientists about implementation of AQbD in pharmaceutical quality system and also to correlate with product quality by design and pharmaceutical analytical technology (PAT).

Experimental and analytical study of high velocity impact on Kevlar/Epoxy composite plates

Science.gov (United States)

Sikarwar, Rahul S.; Velmurugan, Raman; Madhu, Velmuri

2012-12-01

In the present study, impact behavior of Kevlar/Epoxy composite plates has been carried out experimentally by considering different thicknesses and lay-up sequences and compared with analytical results. The effect of thickness, lay-up sequence on energy absorbing capacity has been studied for high velocity impact. Four lay-up sequences and four thickness values have been considered. Initial velocities and residual velocities are measured experimentally to calculate the energy absorbing capacity of laminates. Residual velocity of projectile and energy absorbed by laminates are calculated analytically. The results obtained from analytical study are found to be in good agreement with experimental results. It is observed from the study that 0/90 lay-up sequence is most effective for impact resistance. Delamination area is maximum on the back side of the plate for all thickness values and lay-up sequences. The delamination area on the back is maximum for 0/90/45/-45 laminates compared to other lay-up sequences.

Nonlinear heat conduction equations with memory: Physical meaning and analytical results

Science.gov (United States)

Artale Harris, Pietro; Garra, Roberto

2017-06-01

We study nonlinear heat conduction equations with memory effects within the framework of the fractional calculus approach to the generalized Maxwell-Cattaneo law. Our main aim is to derive the governing equations of heat propagation, considering both the empirical temperature-dependence of the thermal conductivity coefficient (which introduces nonlinearity) and memory effects, according to the general theory of Gurtin and Pipkin of finite velocity thermal propagation with memory. In this framework, we consider in detail two different approaches to the generalized Maxwell-Cattaneo law, based on the application of long-tail Mittag-Leffler memory function and power law relaxation functions, leading to nonlinear time-fractional telegraph and wave-type equations. We also discuss some explicit analytical results to the model equations based on the generalized separating variable method and discuss their meaning in relation to some well-known results of the ordinary case.

Analytical Chemistry Division. Annual progress report for period ending December 31, 1981

International Nuclear Information System (INIS)

Lyon, W.S.

1982-04-01

The functions of the Analytical Chemistry Division fall into three general categories: (1) analytical research, development, and implementation; (2) programmatic research, development and utilization; (3) technical support. The Division is organized into five major sections each of which may carry out any type of work falling into the thre categories mentioned above. Chapters 1 through 5 of this report highlight progress within the five sections which are: analytical methodology; mass and emission spectrometry; analytical technical support; bio/organic analysis section; and nuclear and radiochemical analysis. A short summary introduces each chapter to indicate work scope. Information about quality assurance and safety programs is presented in Chapter 6, along with a tabulation of analyses rendered. Chapter 7 covers supplementary activities. Chapter 8 is on presentation of research results (publications, articles reviewed or referred for periodicals). Approximately 56 articles, 31 proceedings publications and 33 reports have been published, and 119 oral presentations given during this reporting period

Analytical Chemistry Division. Annual progress report for period ending December 31, 1981

Energy Technology Data Exchange (ETDEWEB)

Lyon, W. S. [ed.

1982-04-01

The functions of the Analytical Chemistry Division fall into three general categories: (1) analytical research, development, and implementation; (2) programmatic research, development and utilization; (3) technical support. The Division is organized into five major sections each of which may carry out any type of work falling into the thre categories mentioned above. Chapters 1 through 5 of this report highlight progress within the five sections which are: analytical methodology; mass and emission spectrometry; analytical technical support; bio/organic analysis section; and nuclear and radiochemical analysis. A short summary introduces each chapter to indicate work scope. Information about quality assurance and safety programs is presented in Chapter 6, along with a tabulation of analyses rendered. Chapter 7 covers supplementary activities. Chapter 8 is on presentation of research results (publications, articles reviewed or referred for periodicals). Approximately 56 articles, 31 proceedings publications and 33 reports have been published, and 119 oral presentations given during this reporting period.

Analytical Model-Based Design Optimization of a Transverse Flux Machine

Energy Technology Data Exchange (ETDEWEB)

Hasan, Iftekhar; Husain, Tausif; Sozer, Yilmaz; Husain, Iqbal; Muljadi, Eduard

2017-02-16

This paper proposes an analytical machine design tool using magnetic equivalent circuit (MEC)-based particle swarm optimization (PSO) for a double-sided, flux-concentrating transverse flux machine (TFM). The magnetic equivalent circuit method is applied to analytically establish the relationship between the design objective and the input variables of prospective TFM designs. This is computationally less intensive and more time efficient than finite element solvers. A PSO algorithm is then used to design a machine with the highest torque density within the specified power range along with some geometric design constraints. The stator pole length, magnet length, and rotor thickness are the variables that define the optimization search space. Finite element analysis (FEA) was carried out to verify the performance of the MEC-PSO optimized machine. The proposed analytical design tool helps save computation time by at least 50% when compared to commercial FEA-based optimization programs, with results found to be in agreement with less than 5% error.

XCluSim: a visual analytics tool for interactively comparing multiple clustering results of bioinformatics data

Science.gov (United States)

2015-01-01

Background Though cluster analysis has become a routine analytic task for bioinformatics research, it is still arduous for researchers to assess the quality of a clustering result. To select the best clustering method and its parameters for a dataset, researchers have to run multiple clustering algorithms and compare them. However, such a comparison task with multiple clustering results is cognitively demanding and laborious. Results In this paper, we present XCluSim, a visual analytics tool that enables users to interactively compare multiple clustering results based on the Visual Information Seeking Mantra. We build a taxonomy for categorizing existing techniques of clustering results visualization in terms of the Gestalt principles of grouping. Using the taxonomy, we choose the most appropriate interactive visualizations for presenting individual clustering results from different types of clustering algorithms. The efficacy of XCluSim is shown through case studies with a bioinformatician. Conclusions Compared to other relevant tools, XCluSim enables users to compare multiple clustering results in a more scalable manner. Moreover, XCluSim supports diverse clustering algorithms and dedicated visualizations and interactions for different types of clustering results, allowing more effective exploration of details on demand. Through case studies with a bioinformatics researcher, we received positive feedback on the functionalities of XCluSim, including its ability to help identify stably clustered items across multiple clustering results. PMID:26328893

Quasi-normal frequencies: Semi-analytic results for highly damped modes

International Nuclear Information System (INIS)

Skakala, Jozef; Visser, Matt

2011-01-01

Black hole highly-damped quasi-normal frequencies (QNFs) are very often of the form ω n = (offset) + in (gap). We have investigated the genericity of this phenomenon for the Schwarzschild-deSitter (SdS) black hole by considering a model potential that is piecewise Eckart (piecewise Poschl-Teller), and developing an analytic 'quantization condition' for the highly-damped quasi-normal frequencies. We find that the ω n = (offset) + in (gap) behaviour is common but not universal, with the controlling feature being whether or not the ratio of the surface gravities is a rational number. We furthermore observed that the relation between rational ratios of surface gravities and periodicity of QNFs is very generic, and also occurs within different analytic approaches applied to various types of black hole spacetimes. These observations are of direct relevance to any physical situation where highly-damped quasi-normal modes are important.

FAPIG's activities for public acceptance of nuclear energy. Analytical results of questionnaire executed at organized visits to nuclear power stations

International Nuclear Information System (INIS)

Mizoguchi, Tadao

1999-01-01

FAPIG organizes a visit to nuclear power station in every November. It is an object that visitors acquire the correct knowledge of nuclear power by looking at the various facilities in the nuclear power stations. The paper showed the analytical results of questionnaire executed at organized visits to the Kashiwazaki-Kariwa nuclear power station. The visitors were 18 women. The questionnaire was carried out by the same problems before and after seminar and a conducted tour. Their impressions and opinions and the changes are analyzed. The speakers used easy words, video, OHP, pamphlet and experimental equipment. These means showed very good results to visitors. The seminar had very large effect on just recognition of safety and need of it. The change of answer proved from 3 to 6 of need and from 0 to 7 of safety of it. Nine members indicated good understanding of seminar content. The interested items in the seminar were measurement of radiation, effects of radiation, reason of decreasing average life, Chernobyl accident, difference between nuclear power and atomic bomb and nuclear power dose not generate carbon dioxide and recycle plutonium after nuclear fission of uranium. (S.Y.)

Search Results | Page 16 | IDRC - International Development ...

International Development Research Centre (IDRC) Digital Library (Canada)

2012-01-01

Results 151 - 160 of 162 ... The objective is to carry out an analytical review of postharvest losses (PHLs) and postharvest (PH) innovations related to food and income security; to produce guidelines for systematic assessment of PHLs along value chains; and to generate acti. Published date. January 1, 2012. Briefs.

Final Report on the Analytical Results for Tank Farm Samples in Support of Salt Dissolution Evaluation

International Nuclear Information System (INIS)

Hobbs, D.T.

1996-01-01

Recent processing of dilute solutions through the 2H-Evaporator system caused dissolution of salt in Tank 38H, the concentrate receipt tank. This report documents analytical results for samples taken from this evaporator system

Tank 241-BY-109, cores 201 and 203, analytical results for the final report

International Nuclear Information System (INIS)

Esch, R.A.

1997-01-01

This document is the final laboratory report for tank 241-BY-109 push mode core segments collected between June 6, 1997 and June 17, 1997. The segments were subsampled and analyzed in accordance with the Tank Push Mode Core Sampling and Analysis Plan (Bell, 1997), the Tank Safety Screening Data Quality Objective (Dukelow, et al, 1995). The analytical results are included

Verification of the analytical fracture assessments methods by a large scale pressure vessel test

Energy Technology Data Exchange (ETDEWEB)

Keinanen, H; Oberg, T; Rintamaa, R; Wallin, K

1988-12-31

This document deals with the use of fracture mechanics for the assessment of reactor pressure vessel. Tests have been carried out to verify the analytical fracture assessment methods. The analysis is focused on flaw dimensions and the scatter band of material characteristics. Results are provided and are compared to experimental ones. (TEC).

Consumerism and the Sister Carrie's American Dream%Consumerism and the Sister Carrie''s American Dream

Institute of Scientific and Technical Information of China (English)

卢亚丽

2017-01-01

From the aspect of consumerism to this text analyze Sister Carrie's"American dream"destruction. The author wholly and deeply analyzes the embodiment of consumerism in Dreiser's Sister Carrie and Dreiser's outlook and values under the effect of consumerism. To prove that the reason for destruction of Carrie's American dream is consumerism.

Results Of Analytical Sample Crosschecks For Next Generation Solvent Extraction Samples Isopar L Concentration And pH

International Nuclear Information System (INIS)

Peters, T.; Fink, S.

2011-01-01

As part of the implementation process for the Next Generation Cesium Extraction Solvent (NGCS), SRNL and F/H Lab performed a series of analytical cross-checks to ensure that the components in the NGCS solvent system do not constitute an undue analytical challenge. For measurement of entrained Isopar(reg s ign) L in aqueous solutions, both labs performed similarly with results more reliable at higher concentrations (near 50 mg/L). Low bias occurred in both labs, as seen previously for comparable blind studies for the baseline solvent system. SRNL recommends consideration to use of Teflon(trademark) caps on all sample containers used for this purpose. For pH measurements, the labs showed reasonable agreement but considerable positive bias for dilute boric acid solutions. SRNL recommends consideration of using an alternate analytical method for qualification of boric acid concentrations.

Automation of analytical processes. A tool for higher efficiency and safety

International Nuclear Information System (INIS)

Groll, P.

1976-01-01

The analytical laboratory of a radiochemical facility is usually faced with the fact that numerous analyses of a similar type must be routinely carried out. Automation of such routine analytical procedures helps in increasing the efficiency and safety of the work. A review of the requirements for automation and its advantages is given and demonstrated on three examples. (author)

Resonant amplification of neutrino transitions in the Sun: exact analytical results

International Nuclear Information System (INIS)

Toshev, S.; Petkov, P.

1988-01-01

We investigate in detail the Mikheyev-Smirnov-Wolfenstein explanation of the solar neutrino puzzle using analytical expressions for the neutrino transition probabilities in matter with exponentially varying electron number density

Synthesis of nanodiamond derivatives carrying amino functions and quantification by a modified Kaiser test

Directory of Open Access Journals (Sweden)

Gerald Jarre

2014-11-01

Full Text Available Nanodiamonds functionalized with different organic moieties carrying terminal amino groups have been synthesized. These include conjugates generated by Diels–Alder reactions of ortho-quinodimethanes formed in situ from pyrazine and 5,6-dihydrocyclobuta[d]pyrimidine derivatives. For the quantification of primary amino groups a modified photometric assay based on the Kaiser test has been developed and validated for different types of aminated nanodiamond. The results correspond well to values obtained by thermogravimetry. The method represents an alternative wet-chemical quantification method in cases where other techniques like elemental analysis fail due to unfavourable combustion behaviour of the analyte or other impediments.

MODULAR ANALYTICS: A New Approach to Automation in the Clinical Laboratory.

Science.gov (United States)

Horowitz, Gary L; Zaman, Zahur; Blanckaert, Norbert J C; Chan, Daniel W; Dubois, Jeffrey A; Golaz, Olivier; Mensi, Noury; Keller, Franz; Stolz, Herbert; Klingler, Karl; Marocchi, Alessandro; Prencipe, Lorenzo; McLawhon, Ronald W; Nilsen, Olaug L; Oellerich, Michael; Luthe, Hilmar; Orsonneau, Jean-Luc; Richeux, Gérard; Recio, Fernando; Roldan, Esther; Rymo, Lars; Wicktorsson, Anne-Charlotte; Welch, Shirley L; Wieland, Heinrich; Grawitz, Andrea Busse; Mitsumaki, Hiroshi; McGovern, Margaret; Ng, Katherine; Stockmann, Wolfgang

2005-01-01

MODULAR ANALYTICS (Roche Diagnostics) (MODULAR ANALYTICS, Elecsys and Cobas Integra are trademarks of a member of the Roche Group) represents a new approach to automation for the clinical chemistry laboratory. It consists of a control unit, a core unit with a bidirectional multitrack rack transportation system, and three distinct kinds of analytical modules: an ISE module, a P800 module (44 photometric tests, throughput of up to 800 tests/h), and a D2400 module (16 photometric tests, throughput up to 2400 tests/h). MODULAR ANALYTICS allows customised configurations for various laboratory workloads. The performance and practicability of MODULAR ANALYTICS were evaluated in an international multicentre study at 16 sites. Studies included precision, accuracy, analytical range, carry-over, and workflow assessment. More than 700 000 results were obtained during the course of the study. Median between-day CVs were typically less than 3% for clinical chemistries and less than 6% for homogeneous immunoassays. Median recoveries for nearly all standardised reference materials were within 5% of assigned values. Method comparisons versus current existing routine instrumentation were clinically acceptable in all cases. During the workflow studies, the work from three to four single workstations was transferred to MODULAR ANALYTICS, which offered over 100 possible methods, with reduction in sample splitting, handling errors, and turnaround time. Typical sample processing time on MODULAR ANALYTICS was less than 30 minutes, an improvement from the current laboratory systems. By combining multiple analytic units in flexible ways, MODULAR ANALYTICS met diverse laboratory needs and offered improvement in workflow over current laboratory situations. It increased overall efficiency while maintaining (or improving) quality.

On accuracy problems for semi-analytical sensitivity analyses

DEFF Research Database (Denmark)

Pedersen, P.; Cheng, G.; Rasmussen, John

1989-01-01

The semi-analytical method of sensitivity analysis combines ease of implementation with computational efficiency. A major drawback to this method, however, is that severe accuracy problems have recently been reported. A complete error analysis for a beam problem with changing length is carried ou...... pseudo loads in order to obtain general load equilibrium with rigid body motions. Such a method would be readily applicable for any element type, whether analytical expressions for the element stiffnesses are available or not. This topic is postponed for a future study....

Interacting steps with finite-range interactions: Analytical approximation and numerical results

Science.gov (United States)

Jaramillo, Diego Felipe; Téllez, Gabriel; González, Diego Luis; Einstein, T. L.

2013-05-01

We calculate an analytical expression for the terrace-width distribution P(s) for an interacting step system with nearest- and next-nearest-neighbor interactions. Our model is derived by mapping the step system onto a statistically equivalent one-dimensional system of classical particles. The validity of the model is tested with several numerical simulations and experimental results. We explore the effect of the range of interactions q on the functional form of the terrace-width distribution and pair correlation functions. For physically plausible interactions, we find modest changes when next-nearest neighbor interactions are included and generally negligible changes when more distant interactions are allowed. We discuss methods for extracting from simulated experimental data the characteristic scale-setting terms in assumed potential forms.

Radioimmunoassay. A revolution in the analytic procedure

Energy Technology Data Exchange (ETDEWEB)

Strecker, H; Eckert, H G [Farbwerke Hoechst A.G., Frankfurt am Main (Germany, F.R.). Radiochemisches Lab.

1978-04-01

Radioimmunoassay is an analytic method which combines the sensitivity of radioactive measurement and the specificity of the antigen-antibody reaction Substances down to a concentration of some picograms per ml serum (or biological material) can be measured in the presence of a millionfold excess of otherwise interfering substances. The method is easy to carry out (test tube chemistry). The main field of application at the moment is in endocrinology; further possibilities of application are in pharmaceutical research, environmental protection, forensic medicine, and for general analytic purposes. Radioactive sources are used only in vitro in the nanocurie range, i.e. radiation exposure is negligible.

Environment Carrying Capacity in Developing Innovation Center of Micro Small Medium Enterprises (MSME in Kabupaten Pandeglang, Banten Province

Directory of Open Access Journals (Sweden)

Muhlisin

2015-03-01

Full Text Available The study aims to determine environmental carrying capacity strategies for developing MSMEs Innovation Center. The study research using quantitative descriptive method and instruments questionnaire given to stakeholders and government related to sheep and goats in the Juhut village, Pandeglang. Data collected was processed premises scoring and Analytical Hierarchy Process (AHP method used software of expert choice 11. The results showed that the Carrying Capacity levels of MSME was in the quite category, while aspect of facilitation as the highest proportions and the lowest was access to information. Innovation Center of MSME strategies are through the efforts increased Environment Carrying Capacity’s variables of Innovation Center of MSME are still lacking or not meet the standards through synergy efforts by Ministry of Research of Technology and Higher Education, Provincial Government. Of Banten, district/municipal government, Institute for Agricultural Technology of Banten, and universities.

Electron Beam Return-Current Losses in Solar Flares: Initial Comparison of Analytical and Numerical Results

Science.gov (United States)

Holman, Gordon

2010-01-01

Accelerated electrons play an important role in the energetics of solar flares. Understanding the process or processes that accelerate these electrons to high, nonthermal energies also depends on understanding the evolution of these electrons between the acceleration region and the region where they are observed through their hard X-ray or radio emission. Energy losses in the co-spatial electric field that drives the current-neutralizing return current can flatten the electron distribution toward low energies. This in turn flattens the corresponding bremsstrahlung hard X-ray spectrum toward low energies. The lost electron beam energy also enhances heating in the coronal part of the flare loop. Extending earlier work by Knight & Sturrock (1977), Emslie (1980), Diakonov & Somov (1988), and Litvinenko & Somov (1991), I have derived analytical and semi-analytical results for the nonthermal electron distribution function and the self-consistent electric field strength in the presence of a steady-state return-current. I review these results, presented previously at the 2009 SPD Meeting in Boulder, CO, and compare them and computed X-ray spectra with numerical results obtained by Zharkova & Gordovskii (2005, 2006). The phYSical significance of similarities and differences in the results will be emphasized. This work is supported by NASA's Heliophysics Guest Investigator Program and the RHESSI Project.

Role of maintenance of analytical instruments in the proceedings of quality control laboratory

International Nuclear Information System (INIS)

Haribabu, A.; Sailoo, C.C.; Balaji Rao, Y.; Subba Rao, Y.

2015-01-01

Control Laboratory being a centralized analytical facility of Nuclear Fuel Complex (NFC) is engaged in chemical qualification of all nuclear materials processed/produced at NFC. The primary responsibility of control laboratory is to provide timely analytical results of raw materials, intermediates and final products to all the production plants of NFC for downstream processing. Annual analytical load of nearly five lakhs of estimations are being carried out at laboratory. For this purpose a gamut of analytical facilities ranging from classical methods like gravimetry, volumetry etc. to fully automated state-of-art analytical instruments like ICP-AES, Gas Analysers, Flame and Graphite Furnace-AAS, Direct Reading Emission Spectrometer (DRES), RF GD-OES, TIMS, WD-XRFS, ED-XRFS, Laser based PSD Analyser, Laser Fluorimeter, UV-Vis Spectrophotometer, Gamma Ray Spectrometer, Ion-Chromatography, Gas Chromatography are used to acquire analytical data to see the suitability of products for their intended use. Depending on the applications, analysts validate their procedures, calibrate their instruments, and perform additional instrument checks, such as system suitability tests and analysis of in-process quality control check samples. With the increasing sophistication and automation of analytical instruments, an increasing demand has been placed on maintenance engineers to qualify these instruments for the purpose

Web analytics tools and web metrics tools: An overview and comparative analysis

Directory of Open Access Journals (Sweden)

Ivan Bekavac

2015-10-01

Full Text Available The aim of the paper is to compare and analyze the impact of web analytics tools for measuring the performance of a business model. Accordingly, an overview of web analytics and web metrics tools is given, including their characteristics, main functionalities and available types. The data acquisition approaches and proper choice of web tools for particular business models are also reviewed. The research is divided in two sections. First, a qualitative focus is placed on reviewing web analytics tools to exploring their functionalities and ability to be integrated into the respective business model. Web analytics tools support the business analyst’s efforts in obtaining useful and relevant insights into market dynamics. Thus, generally speaking, selecting a web analytics and web metrics tool should be based on an investigative approach, not a random decision. The second section is a quantitative focus shifting from theory to an empirical approach, and which subsequently presents output data resulting from a study based on perceived user satisfaction of web analytics tools. The empirical study was carried out on employees from 200 Croatian firms from either an either IT or marketing branch. The paper contributes to highlighting the support for management that available web analytics and web metrics tools available on the market have to offer, and based on the growing needs of understanding and predicting global market trends.

A program wide framework for evaluating data driven teaching and learning - earth analytics approaches, results and lessons learned

Science.gov (United States)

Wasser, L. A.; Gold, A. U.

2017-12-01

There is a deluge of earth systems data available to address cutting edge science problems yet specific skills are required to work with these data. The Earth analytics education program, a core component of Earth Lab at the University of Colorado - Boulder - is building a data intensive program that provides training in realms including 1) interdisciplinary communication and collaboration 2) earth science domain knowledge including geospatial science and remote sensing and 3) reproducible, open science workflows ("earth analytics"). The earth analytics program includes an undergraduate internship, undergraduate and graduate level courses and a professional certificate / degree program. All programs share the goals of preparing a STEM workforce for successful earth analytics driven careers. We are developing an program-wide evaluation framework that assesses the effectiveness of data intensive instruction combined with domain science learning to better understand and improve data-intensive teaching approaches using blends of online, in situ, asynchronous and synchronous learning. We are using targeted online search engine optimization (SEO) to increase visibility and in turn program reach. Finally our design targets longitudinal program impacts on participant career tracts over time.. Here we present results from evaluation of both an interdisciplinary undergrad / graduate level earth analytics course and and undergraduate internship. Early results suggest that a blended approach to learning and teaching that includes both synchronous in-person teaching and active classroom hands-on learning combined with asynchronous learning in the form of online materials lead to student success. Further we will present our model for longitudinal tracking of participant's career focus overtime to better understand long-term program impacts. We also demonstrate the impact of SEO optimization on online content reach and program visibility.

Heavy-quark QCD vacuum polarisation function. Analytical results at four loops

International Nuclear Information System (INIS)

Kniehl, B.A.; Kotikov, A.V.

2006-07-01

The first two moments of the heavy-quark vacuum polarisation function at four loops in quantum chromo-dynamics are found in fully analytical form by evaluating the missing massive four-loop tadpole master integrals. (orig.)

Maintenance experiences at analytical laboratory at the Tokai reprocessing plant

International Nuclear Information System (INIS)

Suzuki, Hisanori; Nagayama, Tetsuya; Horigome, Kazushi; Ishibashi, Atsushi; Kitao, Takahiko; Surugaya, Naoki

2014-01-01

The Tokai Reprocessing Plant (TRP) is developing the technology to recover uranium and plutonium from spent nuclear fuel. There is an analytical laboratory which was built in 1977, as one of the most important facilities for process and material control analyses at the TRP. Samples taken from each process are analyzed by various analytical methods using hot cells, glove boxes and hume-hoods. A large number of maintenance work have been so far carried out and different types of experience have been accumulated. This paper describes our achievements in the maintenance activities at the analytical laboratory at the TRP. (author)

Comparison of Analytical and Measured Performance Results on Network Coding in IEEE 802.11 Ad-Hoc Networks

DEFF Research Database (Denmark)

Zhao, Fang; Médard, Muriel; Hundebøll, Martin

2012-01-01

CATWOMAN that can run on standard WiFi hardware. We present an analytical model to evaluate the performance of COPE in simple networks, and our results show the excellent predictive quality of this model. By closely examining the performance in two simple topologies, we observe that the coding gain results...

User-Centered Evaluation of Visual Analytics

Energy Technology Data Exchange (ETDEWEB)

Scholtz, Jean C.

2017-10-01

Visual analytics systems are becoming very popular. More domains now use interactive visualizations to analyze the ever-increasing amount and heterogeneity of data. More novel visualizations are being developed for more tasks and users. We need to ensure that these systems can be evaluated to determine that they are both useful and usable. A user-centered evaluation for visual analytics needs to be developed for these systems. While many of the typical human-computer interaction (HCI) evaluation methodologies can be applied as is, others will need modification. Additionally, new functionality in visual analytics systems needs new evaluation methodologies. There is a difference between usability evaluations and user-centered evaluations. Usability looks at the efficiency, effectiveness, and user satisfaction of users carrying out tasks with software applications. User-centered evaluation looks more specifically at the utility provided to the users by the software. This is reflected in the evaluations done and in the metrics used. In the visual analytics domain this is very challenging as users are most likely experts in a particular domain, the tasks they do are often not well defined, the software they use needs to support large amounts of different kinds of data, and often the tasks last for months. These difficulties are discussed more in the section on User-centered Evaluation. Our goal is to provide a discussion of user-centered evaluation practices for visual analytics, including existing practices that can be carried out and new methodologies and metrics that need to be developed and agreed upon by the visual analytics community. The material provided here should be of use for both researchers and practitioners in the field of visual analytics. Researchers and practitioners in HCI and interested in visual analytics will find this information useful as well as a discussion on changes that need to be made to current HCI practices to make them more suitable to

Guided-inquiry laboratory experiments to improve students' analytical thinking skills

Science.gov (United States)

Wahyuni, Tutik S.; Analita, Rizki N.

2017-12-01

This study aims to improve the experiment implementation quality and analytical thinking skills of undergraduate students through guided-inquiry laboratory experiments. This study was a classroom action research conducted in three cycles. The study has been carried out with 38 undergraduate students of the second semester of Biology Education Department of State Islamic Institute (SII) of Tulungagung, as a part of Chemistry for Biology course. The research instruments were lesson plans, learning observation sheets and undergraduate students' experimental procedure. Research data were analyzed using quantitative-descriptive method. The increasing of analytical thinking skills could be measured using gain score normalized and statistical paired t-test. The results showed that guided-inquiry laboratory experiments model was able to improve both the experiment implementation quality and the analytical thinking skills. N-gain score of the analytical thinking skills was increased, in spite of just 0.03 with low increase category, indicated by experimental reports. Some of undergraduate students have had the difficulties in detecting the relation of one part to another and to an overall structure. The findings suggested that giving feedback the procedural knowledge and experimental reports were important. Revising the experimental procedure that completed by some scaffolding questions were also needed.

Process analysis of two-layered tube hydroforming with analytical and experimental verification

International Nuclear Information System (INIS)

Seyedkashi, S. M. Hossein; Panahizadeh R, Valiollah; Xu, Haibin; Kim, Sang Yun; Moon, Young Hoon

2013-01-01

Two-layered tubular joints are suitable for special applications. Designing and manufacturing of two layered components require enough knowledge about the tube material behavior during the hydroforming process. In this paper, hydroforming of two-layered tubes is investigated analytically, and the results are verified experimentally. The aim of this study is to derive an analytical model which can be used in the process design. Fundamental equations are written for both of the outer and inner tubes, and the total forming pressure is obtained from these equations. Hydroforming experiments are carried out on two different combinations of materials for inner and outer tubes; case 1: copper/aluminum and case 2: carbon steel/stainless steel. It is observed that experimental results are in good agreement with the theoretical model obtained for estimation of forming pressure able to avoid wrinkling.

Consistency of FMEA used in the validation of analytical procedures.

Science.gov (United States)

Oldenhof, M T; van Leeuwen, J F; Nauta, M J; de Kaste, D; Odekerken-Rombouts, Y M C F; Vredenbregt, M J; Weda, M; Barends, D M

2011-02-20

In order to explore the consistency of the outcome of a Failure Mode and Effects Analysis (FMEA) in the validation of analytical procedures, an FMEA was carried out by two different teams. The two teams applied two separate FMEAs to a High Performance Liquid Chromatography-Diode Array Detection-Mass Spectrometry (HPLC-DAD-MS) analytical procedure used in the quality control of medicines. Each team was free to define their own ranking scales for the probability of severity (S), occurrence (O), and detection (D) of failure modes. We calculated Risk Priority Numbers (RPNs) and we identified the failure modes above the 90th percentile of RPN values as failure modes needing urgent corrective action; failure modes falling between the 75th and 90th percentile of RPN values were identified as failure modes needing necessary corrective action, respectively. Team 1 and Team 2 identified five and six failure modes needing urgent corrective action respectively, with two being commonly identified. Of the failure modes needing necessary corrective actions, about a third were commonly identified by both teams. These results show inconsistency in the outcome of the FMEA. To improve consistency, we recommend that FMEA is always carried out under the supervision of an experienced FMEA-facilitator and that the FMEA team has at least two members with competence in the analytical method to be validated. However, the FMEAs of both teams contained valuable information that was not identified by the other team, indicating that this inconsistency is not always a drawback. Copyright © 2010 Elsevier B.V. All rights reserved.

Analytical Modeling Of The Steinmetz Coefficient For Single-Phase Transformer Eddy Current Loss Prediction

Directory of Open Access Journals (Sweden)

T. Aly Saandy

2015-08-01

Full Text Available Abstract This article presents to an analytical calculation methodology of the Steinmetz coefficient applied to the prediction of Eddy current loss in a single-phase transformer. Based on the electrical circuit theory the active power consumed by the core is expressed analytically in function of the electrical parameters as resistivity and the geometrical dimensions of the core. The proposed modeling approach is established with the duality parallel series. The required coefficient is identified from the empirical Steinmetz data based on the experimented active power expression. To verify the relevance of the model validations both by simulations with two in two different frequencies and measurements were carried out. The obtained results are in good agreement with the theoretical approach and the practical results.

An analytical approach to managing complex process problems

Energy Technology Data Exchange (ETDEWEB)

Ramstad, Kari; Andersen, Espen; Rohde, Hans Christian; Tydal, Trine

2006-03-15

The oil companies are continuously investing time and money to ensure optimum regularity on their production facilities. High regularity increases profitability, reduces workload on the offshore organisation and most important; - reduces discharge to air and sea. There are a number of mechanisms and tools available in order to achieve high regularity. Most of these are related to maintenance, system integrity, well operations and process conditions. However, for all of these tools, they will only be effective if quick and proper analysis of fluids and deposits are carried out. In fact, analytical backup is a powerful tool used to maintain optimised oil production, and should as such be given high priority. The present Operator (Hydro Oil and Energy) and the Chemical Supplier (MI Production Chemicals) have developed a cooperation to ensure that analytical backup is provided efficiently to the offshore installations. The Operator's Research and Development (R and D) departments and the Chemical Supplier have complementary specialties in both personnel and equipment, and this is utilized to give the best possible service when required from production technologists or operations. In order for the Operator's Research departments, Health, Safety and Environment (HSE) departments and Operations to approve analytical work performed by the Chemical Supplier, a number of analytical tests are carried out following procedures agreed by both companies. In the present paper, three field case examples of analytical cooperation for managing process problems will be presented. 1) Deposition in a Complex Platform Processing System. 2) Contaminated Production Chemicals. 3) Improved Monitoring of Scale Inhibitor, Suspended Solids and Ions. In each case the Research Centre, Operations and the Chemical Supplier have worked closely together to achieve fast solutions and Best Practice. (author) (tk)

An analytical solution for two-dimensional vacuum preloading combined with electro-osmosis consolidation using EKG electrodes

Science.gov (United States)

Qiu, Chenchen; Li, Yande

2017-01-01

China is a country with vast territory, but economic development and population growth have reduced the usable land resources in recent years. Therefore, reclamation by pumping and filling is carried out in eastern coastal regions of China in order to meet the needs of urbanization. However, large areas of reclaimed land need rapid drainage consolidation treatment. Based on past researches on how to improve the treatment efficiency of soft clay using vacuum preloading combined with electro-osmosis, a two-dimensional drainage plane model was proposed according to the Terzaghi and Esrig consolidation theory. However, the analytical solution using two-dimensional plane model was never involved. Current analytical solutions can’t have a thorough theoretical analysis of practical engineering and give relevant guidance. Considering the smearing effect and the rectangle arrangement pattern, an analytical solution is derived to describe the behavior of pore-water and the consolidation process by using EKG (electro-kinetic geo synthetics) materials. The functions of EKG materials include drainage, electric conduction and corrosion resistance. Comparison with test results is carried out to verify the analytical solution. It is found that the measured value is larger than the applied vacuum degree because of the stacking effect of the vacuum preloading and electro-osmosis. The trends of the mean measured value and the mean analytical value processes are comparable. Therefore, the consolidation model can accurately assess the change in pore-water pressure and the consolidation process during vacuum preloading combined with electro-osmosis. PMID:28771496

An analytical solution for two-dimensional vacuum preloading combined with electro-osmosis consolidation using EKG electrodes.

Directory of Open Access Journals (Sweden)

Yang Shen

Full Text Available China is a country with vast territory, but economic development and population growth have reduced the usable land resources in recent years. Therefore, reclamation by pumping and filling is carried out in eastern coastal regions of China in order to meet the needs of urbanization. However, large areas of reclaimed land need rapid drainage consolidation treatment. Based on past researches on how to improve the treatment efficiency of soft clay using vacuum preloading combined with electro-osmosis, a two-dimensional drainage plane model was proposed according to the Terzaghi and Esrig consolidation theory. However, the analytical solution using two-dimensional plane model was never involved. Current analytical solutions can't have a thorough theoretical analysis of practical engineering and give relevant guidance. Considering the smearing effect and the rectangle arrangement pattern, an analytical solution is derived to describe the behavior of pore-water and the consolidation process by using EKG (electro-kinetic geo synthetics materials. The functions of EKG materials include drainage, electric conduction and corrosion resistance. Comparison with test results is carried out to verify the analytical solution. It is found that the measured value is larger than the applied vacuum degree because of the stacking effect of the vacuum preloading and electro-osmosis. The trends of the mean measured value and the mean analytical value processes are comparable. Therefore, the consolidation model can accurately assess the change in pore-water pressure and the consolidation process during vacuum preloading combined with electro-osmosis.

Analytic theory of the energy and time independent particle transport in the plane geometry

International Nuclear Information System (INIS)

Simovic, R.D.

2001-01-01

An analytic investigation of the energy and time independent particle transport in the plane geometry described by a common anisotropic scattering function is carried out. Regarding the particles with specific diffusion histories in the infinite or the semi-infinite medium, new exact solutions of the corresponding transport equations are analytically derived by means of the Fourier inversion technique. Two particular groups of particles scattered after each successive collision into the directions μ 0, were considered. Its Fourier transformed transport equations have solutions without logarithmic singular points, in the upper part or the lower part of the complex k-plane. The Fourier inversion of solutions are carried out analytically and the obtained formulae represents valid generalization of the expressions for the flux of once scattered particles. (author)

Experience with Dismantling of the Analytic Cell in the JRTF Decommissioning Program

International Nuclear Information System (INIS)

Annoh, Akio; Nemoto, Koichi; Tajiri, Hideo; Saito, Keiichiro; Miyajima, Kazutoshi; Myodo, Masato

2003-01-01

The analytic cell was mainly used for process control analysis of the reprocessing process and for the measurement of fuel burn up ratio in JAERI's Reprocessing Test Facility (JRTF). The analytic cell was a heavy shielded one and equipped with a conveyor. The cell was alpha and beta(gamma)contaminated. For dismantling of analytic cells, it is very important to establish a method to remove the heavy shield safely and reduce the exposure. At first, a green house was set up to prevent the spread out of contamination, and next, the analytic cell was dismantled. Depending on the contamination condition, the workers wore protective suits such as air ventilated-suits for prevention of internal exposure and vinyl chloride aprons, lead aprons in order to reduce external exposure. From the work carried out, various data such as needed manpower for the activities, the collective dose of workers by external exposure, the amount of radioactive wastes and the relation between the weight of the shield and its dismantling efficiency were obtained and input for the database. The method of dismantling and the experience with the dismantling of the analytic cell in the JRTF, carried out during 2001 and 2002, are described in this paper

D4.1 Learning analytics: theoretical background, methodology and expected results

NARCIS (Netherlands)

Tammets, Kairit; Laanpere, Mart; Eradze, Maka; Brouns, Francis; Padrón-Nápoles, Carmen; De Rosa, Rosanna; Ferrari, Chiara

2014-01-01

The purpose of the EMMA project is to showcase excellence in innovative teaching methodologies and learning approaches through the large-scale piloting of MOOCs on different subjects. The main objectives related with the implementation of learning analytics in EMMa project are to: ● develop the

The environmental evaluation of substation based on the fuzzy analytic hierarchy process

Science.gov (United States)

Qian, Wenxiao; Zuo, Xiujiang; Chen, Yuandong; Ye, Ming; Fang, Zhankai; Yang, Fan

2018-02-01

This paper studies on the different influences on the environment of the substations and puts forward an index system of environmental protection through the fuzzy analytic hierarchy process. A comprehensive environmental evaluation on a substation is carried out through investigation and measurement of the current environmental factors, and the statistical data has validated the effectiveness and feasibility of this evaluation index system. The results indicate that the proposed model has high efficiency.

Carry

DEFF Research Database (Denmark)

Koijen, Ralph S.J.; Moskowitz, Tobias; Pedersen, Lasse Heje

2018-01-01

-sectionally and in time series for a host of different asset classes, including global equities, global bonds, commodities, US Treasuries, credit, and options. Carry is not explained by known predictors of returns from these asset classes, and it captures many of these predictors, providing a unifying framework...... for return predictability. We reject a generalized version of Uncovered Interest Parity and the Expectations Hypothesis in favor of models with varying risk premia, in which carry strategies are commonly exposed to global recession, liquidity, and volatility risks, though none fully explains carry’s premium....

Analytic manifolds in uniform algebras

International Nuclear Information System (INIS)

Tonev, T.V.

1988-12-01

Here we extend Bear-Hile's result concerning the version of famous Bishop's theorem for one-dimensional analytic structures in two directions: for n-dimensional complex analytic manifolds, n>1, and for generalized analytic manifolds. 14 refs

Analytical Chemistry Division annual progress report for period ending December 31, 1988

Energy Technology Data Exchange (ETDEWEB)

1988-05-01

The Analytical Chemistry Division of Oak Ridge National Laboratory (ORNL) is a large and diversified organization. As such, it serves a multitude of functions for a clientele that exists both in and outside of ORNL. These functions fall into the following general categories: (1) Analytical Research, Development, and Implementation. The division maintains a program to conceptualize, investigate, develop, assess, improve, and implement advanced technology for chemical and physicochemical measurements. Emphasis is on problems and needs identified with ORNL and Department of Energy (DOE) programs; however, attention is also given to advancing the analytical sciences themselves. (2) Programmatic Research, Development, and Utilization. The division carries out a wide variety of chemical work that typically involves analytical research and/or development plus the utilization of analytical capabilities to expedite programmatic interests. (3) Technical Support. The division performs chemical and physicochemical analyses of virtually all types. The Analytical Chemistry Division is organized into four major sections, each of which may carry out any of the three types of work mentioned above. Chapters 1 through 4 of this report highlight progress within the four sections during the period January 1 to December 31, 1988. A brief discussion of the division's role in an especially important environmental program is given in Chapter 5. Information about quality assurance, safety, and training programs is presented in Chapter 6, along with a tabulation of analyses rendered. Publications, oral presentations, professional activities, educational programs, and seminars are cited in Chapters 7 and 8.

Analytical Chemistry Division annual progress report for period ending December 31, 1988

International Nuclear Information System (INIS)

1988-05-01

The Analytical Chemistry Division of Oak Ridge National Laboratory (ORNL) is a large and diversified organization. As such, it serves a multitude of functions for a clientele that exists both in and outside of ORNL. These functions fall into the following general categories: (1) Analytical Research, Development, and Implementation. The division maintains a program to conceptualize, investigate, develop, assess, improve, and implement advanced technology for chemical and physicochemical measurements. Emphasis is on problems and needs identified with ORNL and Department of Energy (DOE) programs; however, attention is also given to advancing the analytical sciences themselves. (2) Programmatic Research, Development, and Utilization. The division carries out a wide variety of chemical work that typically involves analytical research and/or development plus the utilization of analytical capabilities to expedite programmatic interests. (3) Technical Support. The division performs chemical and physicochemical analyses of virtually all types. The Analytical Chemistry Division is organized into four major sections, each of which may carry out any of the three types of work mentioned above. Chapters 1 through 4 of this report highlight progress within the four sections during the period January 1 to December 31, 1988. A brief discussion of the division's role in an especially important environmental program is given in Chapter 5. Information about quality assurance, safety, and training programs is presented in Chapter 6, along with a tabulation of analyses rendered. Publications, oral presentations, professional activities, educational programs, and seminars are cited in Chapters 7 and 8

Twist-2 at seven loops in planar N=4 SYM theory: full result and analytic properties

Energy Technology Data Exchange (ETDEWEB)

Marboe, Christian [School of Mathematics, Trinity College Dublin,College Green, Dublin 2 (Ireland); Institut für Mathematik und Institut für Physik, Humboldt-Universität zu Berlin,IRIS Adlershof, Zum Großen Windkanal 6, 12489 Berlin (Germany); Velizhanin, Vitaly [Theoretical Physics Division, NRC “Kurchatov Institute”,Petersburg Nuclear Physics Institute, Orlova Roscha,Gatchina, 188300 St. Petersburg (Russian Federation); Institut für Mathematik und Institut für Physik, Humboldt-Universität zu Berlin,IRIS Adlershof, Zum Großen Windkanal 6, 12489 Berlin (Germany)

2016-11-04

The anomalous dimension of twist-2 operators of arbitrary spin in planar N=4 SYM theory is found at seven loops by using the quantum spectral curve to compute values at fixed spin, and reconstructing the general result using the LLL-algorithm together with modular arithmetic. The result of the analytic continuation to negative spin is presented, and its relation with the recently computed correction to the BFKL and double-logarithmic equation is discussed.

Binding assays with streptavidin-functionalized superparamagnetic nanoparticles and biotinylated analytes using fluxgate magnetorelaxometry

International Nuclear Information System (INIS)

Heim, Erik; Ludwig, Frank; Schilling, Meinhard

2009-01-01

Binding assays based on the magnetorelaxation of superparamagnetic nanoparticles as markers are presented utilizing a differential fluxgate system. As ligand and receptor, streptavidin and biotin, respectively, are used. Superparamagnetic nanoparticles are functionalized with streptavidin and bound to two types of biotinylated analytes: agarose beads and bovine serum (BSA) proteins. The size difference of the two analytes causes a different progress of the reaction. As a consequence, the analysis of the relaxation signal is carried out dissimilarly for the two analytes. In addition, we studied the reaction kinetics of the two kinds of analytes with the fluxgate system.

Effects of analytes on the fluorescence properties of CdTe@ZnS quantum dots decorated with cobalt tetraamino-phthalocyanine

Energy Technology Data Exchange (ETDEWEB)

Adegoke, Oluwasesan; Nyokong, Tebello, E-mail: t.nyokong@ru.ac.za

2014-02-15

In this work, we have carried out an investigation on the effects of different biologically active analytes on the fluorescence response of glutathione-capped CdTe@ZnS quantum dots (QDs)-colbalt tetraamino-phthalocyanine nanoconjugate system. Firstly, fluorescence quenching occurred. Experimental results showed that some analytes either “turned on”, others further quenched or showed no effect on the fluorescence emission of the nanoprobe. -- Highlights: • A conjugate between CdTe@ZnS quantum dots and cobalt tetraamino-phthalocyanine is formed. • The fluorescence of quantum dots is quenched on coordination. • The fluorescence is enhanced by analytes such as cystamine, hydroxyl radical, glutathione, and perchlorate.

Piecewise linear emulator of the nonlinear Schroedinger equation and the resulting analytic solutions for Bose-Einstein condensates

International Nuclear Information System (INIS)

Theodorakis, Stavros

2003-01-01

We emulate the cubic term Ψ 3 in the nonlinear Schroedinger equation by a piecewise linear term, thus reducing the problem to a set of uncoupled linear inhomogeneous differential equations. The resulting analytic expressions constitute an excellent approximation to the exact solutions, as is explicitly shown in the case of the kink, the vortex, and a δ function trap. Such a piecewise linear emulation can be used for any differential equation where the only nonlinearity is a Ψ 3 one. In particular, it can be used for the nonlinear Schroedinger equation in the presence of harmonic traps, giving analytic Bose-Einstein condensate solutions that reproduce very accurately the numerically calculated ones in one, two, and three dimensions

An analytic study of applying Miller cycle to reduce NOx emission from petrol engine

International Nuclear Information System (INIS)

Wang Yaodong; Lin Lin; Roskilly, Anthony P.; Zeng Shengchuo; Huang, Jincheng; He Yunxin; Huang Xiaodong; Huang Huilan; Wei Haiyan; Li Shangping; Yang Jing

2007-01-01

An analytic investigation of applying Miller cycle to reduce nitrogen oxides (NO x ) emissions from a petrol engine is carried out. The Miller cycle used in the investigation is a late intake valve closing version. A detailed thermodynamic analysis of the cycle is presented. A comparison of the characters of Miller cycle with Otto cycle is presented. From the results of thermodynamic analyses, it can be seen that the application of Miller cycle is able to reduce the compression pressure and temperature in the cylinder at the end of compression stroke. Therefore, it lowers down the combustion temperature and NO x formation in engine cylinder. These results in a lower exhaust temperature and less NO x emissions compared with that of Otto cycle. The analytic results also show that Miller cycle ratio is a main factor to influence the combustion temperature, and then the NO x emissions and the exhaust temperature. The results from the analytic study are used to analyse and to compare with the previous experimental results. An empirical formula from the previous experimental results that showed the relation of NO x emissions with the exhaust temperature at different engine speed is presented. The results from the study showed that the application of Miller cycle may reduce NO x emissions from petrol engine

Analytical Evaluation of Scientific Communications in the Field of Schoolchildren and Adolescents Health Care

Directory of Open Access Journals (Sweden)

M.M. Korenev

2013-11-01

Full Text Available The article deals with information and analytical evaluation of studies carried out in Ukraine in the field of a scientific problem «Health care of school-aged children and adolescents» over the past five years. There were shown the most developed directions, analyzed quantitative parameters and thematic areas of information and innovative resources created by the results of scientific researches.

Tank 241-T-204, core 188 analytical results for the final report

Energy Technology Data Exchange (ETDEWEB)

Nuzum, J.L.

1997-07-24

TANK 241-T-204, CORE 188, ANALYTICAL RESULTS FOR THE FINAL REPORT. This document is the final laboratory report for Tank 241 -T-204. Push mode core segments were removed from Riser 3 between March 27, 1997, and April 11, 1997. Segments were received and extruded at 222-8 Laboratory. Analyses were performed in accordance with Tank 241-T-204 Push Mode Core Sampling and analysis Plan (TRAP) (Winkleman, 1997), Letter of instruction for Core Sample Analysis of Tanks 241-T-201, 241- T-202, 241-T-203, and 241-T-204 (LAY) (Bell, 1997), and Safety Screening Data Qual@ Objective (DO) ODukelow, et al., 1995). None of the subsamples submitted for total alpha activity (AT) or differential scanning calorimetry (DC) analyses exceeded the notification limits stated in DO. The statistical results of the 95% confidence interval on the mean calculations are provided by the Tank Waste Remediation Systems Technical Basis Group and are not considered in this report.

Analytical Results for Scaling Properties of the Spectrum of the Fibonacci Chain

Science.gov (United States)

Piéchon, Frédéric; Benakli, Mourad; Jagannathan, Anuradha

1995-06-01

We solve the approximate renormalization group found by Niu and Nori for a quasiperiodic tight-binding Hamiltonian on the Fibonacci chain. This enables us to characterize analytically the spectral properties of this model.

Fields, particles and analyticity: recent results or 30 goldberg (ER) variations on B.A.C.H

International Nuclear Information System (INIS)

Bros, J.

1991-01-01

As it is known, Axiomatic Field Theory (A) implies double analyticity of the η-point functions in space-time and energy-momentum Complex Variables (C), with various interconnections by Fourier-Laplace analysis. When the latter is replaced by. Harmonic Analysis (H) on spheres and hyperboloids, a new kind of double analyticity results from (A) (i.e. from locality, spectral condition, temperateness and invariance): complex angular momentum is thereby introduced (a missing chapter in (A)). Exploitation of Asymptotic Completeness via Bethe-Salpeter-type equations (B) leads to new developments of the previous theme on (A, C, H) (complex angular momentum) and of other themes on (A,C) (crossing, Haag-Swieca property etc...). Various aspects of (A) + (B) have been implemented in Constructive Field Theory (composite spectrum, asymptotic properties etc...) by a combination of specific techniques and of model-independent methods

Fields, particles and analyticity: recent results or 30 goldberg (ER) variations on B.A.C.H

Energy Technology Data Exchange (ETDEWEB)

Bros, J

1992-12-31

As it is known, Axiomatic Field Theory (A) implies double analyticity of the {eta}-point functions in space-time and energy-momentum Complex Variables (C), with various interconnections by Fourier-Laplace analysis. When the latter is replaced by. Harmonic Analysis (H) on spheres and hyperboloids, a new kind of double analyticity results from (A) (i.e. from locality, spectral condition, temperateness and invariance): complex angular momentum is thereby introduced (a missing chapter in (A)). Exploitation of Asymptotic Completeness via Bethe-Salpeter-type equations (B) leads to new developments of the previous theme on (A, C, H) (complex angular momentum) and of other themes on (A,C) (crossing, Haag-Swieca property etc...). Various aspects of (A) + (B) have been implemented in Constructive Field Theory (composite spectrum, asymptotic properties etc...) by a combination of specific techniques and of model-independent methods.

Croatian Analytical Terminology

Directory of Open Access Journals (Sweden)

Kastelan-Macan; M.

2008-04-01

Full Text Available Results of analytical research are necessary in all human activities. They are inevitable in making decisions in the environmental chemistry, agriculture, forestry, veterinary medicine, pharmaceutical industry, and biochemistry. Without analytical measurements the quality of materials and products cannot be assessed, so that analytical chemistry is an essential part of technical sciences and disciplines.The language of Croatian science, and analytical chemistry within it, was one of the goals of our predecessors. Due to the political situation, they did not succeed entirely, but for the scientists in independent Croatia this is a duty, because language is one of the most important features of the Croatian identity. The awareness of the need to introduce Croatian terminology was systematically developed in the second half of the 19th century, along with the founding of scientific societies and the wish of scientists to write their scientific works in Croatian, so that the results of their research may be applied in economy. Many authors of textbooks from the 19th and the first half of the 20th century contributed to Croatian analytical terminology (F. Rački, B. Šulek, P. Žulić, G. Pexidr, J. Domac, G. Janeček , F. Bubanović, V. Njegovan and others. M. DeŢelić published the first systematic chemical terminology in 1940, adjusted to the IUPAC recommendations. In the second half of 20th century textbooks in classic analytical chemistry were written by V. Marjanović-Krajovan, M. Gyiketta-Ogrizek, S. Žilić and others. I. Filipović wrote the General and Inorganic Chemistry textbook and the Laboratory Handbook (in collaboration with P. Sabioncello and contributed greatly to establishing the terminology in instrumental analytical methods.The source of Croatian nomenclature in modern analytical chemistry today are translated textbooks by Skoog, West and Holler, as well as by Günnzler i Gremlich, and original textbooks by S. Turina, Z. �

Local Dynamic Stability Associated with Load Carrying

Directory of Open Access Journals (Sweden)

Jian Liu

2013-03-01

Conclusion: Current study confirmed the sensitivity of local dynamic stability measure in load carrying situation. It was concluded that load carrying tasks were associated with declined local dynamic stability, which may result in increased risk of fall accident. This finding has implications in preventing fall accidents associated with occupational load carrying.

Analytic nuclear scattering theories

International Nuclear Information System (INIS)

Di Marzio, F.; University of Melbourne, Parkville, VIC

1999-01-01

A wide range of nuclear reactions are examined in an analytical version of the usual distorted wave Born approximation. This new approach provides either semi analytic or fully analytic descriptions of the nuclear scattering processes. The resulting computational simplifications, when used within the limits of validity, allow very detailed tests of both nuclear interaction models as well as large basis models of nuclear structure to be performed

Distribution of Steps with Finite-Range Interactions: Analytic Approximations and Numerical Results

Science.gov (United States)

GonzáLez, Diego Luis; Jaramillo, Diego Felipe; TéLlez, Gabriel; Einstein, T. L.

2013-03-01

While most Monte Carlo simulations assume only nearest-neighbor steps interact elastically, most analytic frameworks (especially the generalized Wigner distribution) posit that each step elastically repels all others. In addition to the elastic repulsions, we allow for possible surface-state-mediated interactions. We investigate analytically and numerically how next-nearest neighbor (NNN) interactions and, more generally, interactions out to q'th nearest neighbor alter the form of the terrace-width distribution and of pair correlation functions (i.e. the sum over n'th neighbor distribution functions, which we investigated recently.[2] For physically plausible interactions, we find modest changes when NNN interactions are included and generally negligible changes when more distant interactions are allowed. We discuss methods for extracting from simulated experimental data the characteristic scale-setting terms in assumed potential forms.

Development of quantitative analytical procedures on two-phase flow in tight-lattice fuel bundles for reduced-moderation light-water reactors

International Nuclear Information System (INIS)

Ohnuki, A.; Kureta, M.; Takae, K.; Tamai, H.; Akimoto, H.; Yoshida, H.

2004-01-01

The research project to investigate thermal-hydraulic performance in tight-lattice rod bundles for Reduced-Moderation Water Reactor (RMWR) started at Japan Atomic Energy Research Institute (JAERI) in 2002. The RMWR is a light water reactor for which a higher conversion ratio more than one can be expected. In order to attain this higher conversion ratio, triangular tight-lattice fuel bundles whose gap spacing between each fuel rod is around 1 mm are required. As for the thermal design of the RMWR core, conventional analytical methods are no good because the conventional composition equations can not predict the RMWR core with high accuracy. Then, development of new quantitative analytical procedures was carried out. Those analytical procedures are constructed by model experiments and advanced two-phase flow analysis codes. This paper describes the results of the model experiments and analytical results with the developed analysis codes. (authors)

An analytical model of SAGD process considering the effect of threshold pressure gradient

Science.gov (United States)

Morozov, P.; Abdullin, A.; Khairullin, M.

2018-05-01

An analytical model is proposed for the development of super-viscous oil deposits by the method of steam-assisted gravity drainage, taking into account the nonlinear filtration law with the limiting gradient. The influence of non-Newtonian properties of oil on the productivity of a horizontal well and the cumulative steam-oil ratio are studied. Verification of the proposed model based on the results of physical modeling of the SAGD process was carried out.

SEMI-ANALYTIC GALAXY EVOLUTION (SAGE): MODEL CALIBRATION AND BASIC RESULTS

Energy Technology Data Exchange (ETDEWEB)

Croton, Darren J.; Stevens, Adam R. H.; Tonini, Chiara; Garel, Thibault; Bernyk, Maksym; Bibiano, Antonio; Hodkinson, Luke; Mutch, Simon J.; Poole, Gregory B.; Shattow, Genevieve M. [Centre for Astrophysics and Supercomputing, Swinburne University of Technology, P.O. Box 218, Hawthorn, Victoria 3122 (Australia)

2016-02-15

This paper describes a new publicly available codebase for modeling galaxy formation in a cosmological context, the “Semi-Analytic Galaxy Evolution” model, or sage for short.{sup 5} sage is a significant update to the 2006 model of Croton et al. and has been rebuilt to be modular and customizable. The model will run on any N-body simulation whose trees are organized in a supported format and contain a minimum set of basic halo properties. In this work, we present the baryonic prescriptions implemented in sage to describe the formation and evolution of galaxies, and their calibration for three N-body simulations: Millennium, Bolshoi, and GiggleZ. Updated physics include the following: gas accretion, ejection due to feedback, and reincorporation via the galactic fountain; a new gas cooling–radio mode active galactic nucleus (AGN) heating cycle; AGN feedback in the quasar mode; a new treatment of gas in satellite galaxies; and galaxy mergers, disruption, and the build-up of intra-cluster stars. Throughout, we show the results of a common default parameterization on each simulation, with a focus on the local galaxy population.

SEMI-ANALYTIC GALAXY EVOLUTION (SAGE): MODEL CALIBRATION AND BASIC RESULTS

International Nuclear Information System (INIS)

Croton, Darren J.; Stevens, Adam R. H.; Tonini, Chiara; Garel, Thibault; Bernyk, Maksym; Bibiano, Antonio; Hodkinson, Luke; Mutch, Simon J.; Poole, Gregory B.; Shattow, Genevieve M.

2016-01-01

This paper describes a new publicly available codebase for modeling galaxy formation in a cosmological context, the “Semi-Analytic Galaxy Evolution” model, or sage for short. 5 sage is a significant update to the 2006 model of Croton et al. and has been rebuilt to be modular and customizable. The model will run on any N-body simulation whose trees are organized in a supported format and contain a minimum set of basic halo properties. In this work, we present the baryonic prescriptions implemented in sage to describe the formation and evolution of galaxies, and their calibration for three N-body simulations: Millennium, Bolshoi, and GiggleZ. Updated physics include the following: gas accretion, ejection due to feedback, and reincorporation via the galactic fountain; a new gas cooling–radio mode active galactic nucleus (AGN) heating cycle; AGN feedback in the quasar mode; a new treatment of gas in satellite galaxies; and galaxy mergers, disruption, and the build-up of intra-cluster stars. Throughout, we show the results of a common default parameterization on each simulation, with a focus on the local galaxy population

Analytical, Practical and Emotional Intelligence and Line Manager Competencies

Directory of Open Access Journals (Sweden)

Anna Baczyńska

2015-12-01

Full Text Available Purpose: The research objective was to examine to what extent line manager competencies are linked to intelligence, and more specifically, three types of intelligence: analytical (fluid, practical and emotional. Methodology: The research was carried out with line managers (N=98 who took part in 12 Assessment Centre sessions and completed tests measuring analytical, practical and emotional intelligence. The adopted hypotheses were tested using a multiple regression. In the regression model, the dependent variable was a managerial competency (management and striving for results, social skills, openness to change, problem solving, employee development and the explanatory variables were the three types of intelligence. Five models, each for a separate management competency, were tested in this way. Findings: In the study, it was hypothesized that practical intelligence relates to procedural tacit knowledge and is the strongest indicator of managerial competency. Analysis of the study results testing this hypothesis indicated that practical intelligence largely accounts for the level of competency used in managerial work (from 21% to 38%. The study findings suggest that practical intelligence is a better indicator of managerial competencies among line managers than traditionally measured IQ or emotional intelligence. Originality: This research fills an important gap in the literature on the subject, indicating the links between major contemporary selection indicators (i.e., analytical, practical and emotional intelligence and managerial competencies presented in realistic work simulations measured using the Assessment Centre process.

Analytical results from salt batch 9 routine DSSHT and SEHT monthly samples

Energy Technology Data Exchange (ETDEWEB)

Peters, T. B. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

2017-06-01

Strip Effluent Hold Tank (SEHT) and Decontaminated Salt Solution Hold Tank (DSSHT) samples from several of the “microbatches” of Integrated Salt Disposition Project (ISDP) Salt Batch (“Macrobatch”) 9 have been analyzed for ²³⁸Pu, ⁹⁰Sr, ¹³⁷Cs, cations (Inductively Coupled Plasma Emission Spectroscopy - ICPES), and anions (Ion Chromatography Anions - IC-A). The analytical results from the current microbatch samples are similar to those from previous macrobatch samples. The Cs removal continues to be acceptable, with decontamination factors (DF) averaging 25700 (107% RSD). The bulk chemistry of the DSSHT and SEHT samples do not show any signs of unusual behavior, other than lacking the anticipated degree of dilution that is calculated to occur during Modular Caustic-Side Solvent Extraction Unit (MCU) processing.

Framework for pedagogical learning analytics

OpenAIRE

Heilala, Ville

2018-01-01

Learning analytics is an emergent technological practice and a multidisciplinary scientific discipline, which goal is to facilitate effective learning and knowledge of learning. In this design science research, I combine knowledge discovery process, a concept of pedagogical knowledge, ethics of learning analytics and microservice architecture. The result is a framework for pedagogical learning analytics. The framework is applied and evaluated in the context of agency analytics. The framework ...

Numerical and Analytical Study of Optimal Low-Thrust Limited-Power Transfers between Close Circular Coplanar Orbits

Directory of Open Access Journals (Sweden)

Sandro da Silva Fernandes

2007-01-01

Full Text Available A numerical and analytical study of optimal low-thrust limited-power trajectories for simple transfer (no rendezvous between close circular coplanar orbits in an inverse-square force field is presented. The numerical study is carried out by means of an indirect approach of the optimization problem in which the two-point boundary value problem, obtained from the set of necessary conditions describing the optimal solutions, is solved through a neighboring extremal algorithm based on the solution of the linearized two-point boundary value problem through Riccati transformation. The analytical study is provided by a linear theory which is expressed in terms of nonsingular elements and is determined through the canonical transformation theory. The fuel consumption is taken as the performance criterion and the analysis is carried out considering various radius ratios and transfer durations. The results are compared to the ones provided by a numerical method based on gradient techniques.

Radioecological monitoring carried out near the Gravelines NPP. Report of 2010 results. Comments and perspectives

International Nuclear Information System (INIS)

Bernollin, A.; Barbey, P.; Boilley, D.; Josset, M.; Migeon, A.; Dunand, E.

2011-01-01

The local information committee (CLI) of Gravelines NPP requested an independent survey of radioactivity levels in the environment for 2010.This survey was carried out by the ACRO organization according to applicable standards and common practices. Even if Gravelines NPP effluents have been the primary aim of the survey, other possible contributions like those from other French and UK NPPs, Areva's reprocessing plants and all past atomic bomb and Chernobyl fallouts, have been considered too. The report presents: the sampling performed, the results of the analyses made (gamma spectroscopy and liquid scintillation) and the comments of these analyses (artificial radioactivity in algae, molluscs, sediments, waters (tritium), foodstuff/vegetables, terrestrial ecosystems). Finally, a comparison is made with other data from the Normandy coastline

Application of advanced nuclear and instrumental analytical techniques for characterisation of environmental materials

International Nuclear Information System (INIS)

Sudersanan, M.; Pawaskar, P.B.; Kayasth, S.R.; Kumar, S.C.

2002-01-01

Full text: Increasing realisation about the toxic effects of metal ions in environmental materials has given an impetus to research on analytical techniques for their characterization. The large number of analytes present at very low levels has necessitated the use of sensitive, selective and element specific techniques for their characterization. The concern about precision and accuracy on such analysis, which have socio-economic bearing, has emphasized the use of Certified Reference Materials and the use of multi-technique approach for the unambiguous characterization of analytes. The recent work carried out at Analytical Chemistry Division, BARC on these aspects is presented in this paper. Increasing use of fossil fuels has led to the generation of large quantities of fly ash which pose problems of safe disposal. The utilization of these materials for land filling is an attractive option but the presence of trace amounts of toxic metals like mercury, arsenic, lead etc may cause environmental problems. In view of the inhomogeneous nature of the material, efficient sample processing is an important factor, in addition to the validation of the results by the use of proper standards. Analysis was carried out on flyash samples received as reference materials and also as samples from commercial sources using a combination of both nuclear techniques like INAA and RNAA as well as other techniques like AAS, ICPAES, cold vapour AAS for mercury and hydride generation technique for arsenic. Similar analysis using nuclear techniques was employed for the characterization of air particulates. Biological materials often serve as sensitive indicator materials for pollution measurements. They are also employed for studies on the uptake of toxic metals like U, Th, Cd, Pb, Hg etc. The presence of large amounts of organic materials in them necessitate an appropriate sample dissolution procedure. In view of the possibility of loss of certain analytes like Cd, Hg, As, by high

Analysis of environmental contamination resulting from catastrophic incidents: part 2. Building laboratory capability by selecting and developing analytical methodologies.

Science.gov (United States)

Magnuson, Matthew; Campisano, Romy; Griggs, John; Fitz-James, Schatzi; Hall, Kathy; Mapp, Latisha; Mullins, Marissa; Nichols, Tonya; Shah, Sanjiv; Silvestri, Erin; Smith, Terry; Willison, Stuart; Ernst, Hiba

2014-11-01

Catastrophic incidents can generate a large number of samples of analytically diverse types, including forensic, clinical, environmental, food, and others. Environmental samples include water, wastewater, soil, air, urban building and infrastructure materials, and surface residue. Such samples may arise not only from contamination from the incident but also from the multitude of activities surrounding the response to the incident, including decontamination. This document summarizes a range of activities to help build laboratory capability in preparation for sample analysis following a catastrophic incident, including selection and development of fit-for-purpose analytical methods for chemical, biological, and radiological contaminants. Fit-for-purpose methods are those which have been selected to meet project specific data quality objectives. For example, methods could be fit for screening contamination in the early phases of investigation of contamination incidents because they are rapid and easily implemented, but those same methods may not be fit for the purpose of remediating the environment to acceptable levels when a more sensitive method is required. While the exact data quality objectives defining fitness-for-purpose can vary with each incident, a governing principle of the method selection and development process for environmental remediation and recovery is based on achieving high throughput while maintaining high quality analytical results. This paper illustrates the result of applying this principle, in the form of a compendium of analytical methods for contaminants of interest. The compendium is based on experience with actual incidents, where appropriate and available. This paper also discusses efforts aimed at adaptation of existing methods to increase fitness-for-purpose and development of innovative methods when necessary. The contaminants of interest are primarily those potentially released through catastrophes resulting from malicious activity

Separation of uranium and common impurities from solid analytical waste containing plutonium

International Nuclear Information System (INIS)

Pathak, Nimai; Kumar, Mithlesh; Thulasidas, S.K.; Hon, N.S.; Kulkarni, M.J.; Mhatre, Amol; Natarajan, V.

2014-07-01

The report describes separation of uranium (U) and common impurities from solid analytical waste containing plutonium (Pu). This will be useful in recovery of Pu from nuclear waste. This is an important activity of any nuclear program in view of the strategic importance of Pu. In Radiochemistry Division, the trace metal analysis of Pu bearing fuel materials such as PuO 2 , (U,Pu)O 2 and (U,Pu)C are being carried out using the DC arc-Carrier Distillation technique. During these analyses, solid analytical waste containing Pu and 241 Am is generated. This comprises of left-over of samples and prepared charges. The main constituents of this waste are uranium oxide, plutonium oxide and silver chloride used as carrier. This report describes the entire work carried out to separate gram quantities of Pu from large amounts of U and mg quantities of 241 Am and the effect of leaching of the waste with nitric acid as a function of batch size. The effect of leaching the solid analytical waste of (U,Pu)O 2 and AgCl with concentrated nitric acid for different time intervals was also studied. Later keeping the time constant, the effect of nitric acid molarity on the leaching of U and Pu was investigated. Four different lots of the waste having different amounts were subjected to multiple leaching with 8 M nitric acid, each for 15 minutes duration. In all the experiments the amount of Uranium, Plutonium and other impurities leached were determined using ICP as an excitation source. The results are discussed in this report. (author)

Tank 241-U-106, cores 147 and 148, analytical results for the final report

Energy Technology Data Exchange (ETDEWEB)

Steen, F.H.

1996-09-27

This document is the final report deliverable for tank 241-U-106 push mode core segments collected between May 8, 1996 and May 10, 1996 and received by the 222-S Laboratory between May 14, 1996 and May 16, 1996. The segments were subsampled and analyzed in accordance with the Tank 241-U-106 Push Mode Core Sampling and analysis Plan (TSAP), the Historical Model Evaluation Data Requirements (Historical DQO), Data Quality Objective to Support Resolution of the Organic Complexant Safety Issue (Organic DQO) and the Safety Screening Data Quality Objective (DQO). The analytical results are included in Table 1.

Three-neutrino oscillations in matter: Analytical results in the adiabatic approximaton

International Nuclear Information System (INIS)

Petcov, S.T.; Toshev, S.

1987-01-01

Analytical expressions for the probabilities of the transitions between different neutrino flavours in matter in the case of three lepton families and small vacuum mixing angles are obtained in the adiabatic approximation. A brief discussion of the characteristic features of the Mikheyev-Smirnov-Wolfenstein effect in the system of the three neutrino flavours ν e , ν μ and ν τ is also given. (orig.)

Carrying Capacity

DEFF Research Database (Denmark)

Schroll, Henning; Andersen, Jan; Kjærgård, Bente

2012-01-01

A spatial planning act was introduced inIndonesia 1992 and renewed in 2008. It emphasised the planning role of decentralised authorities. The spatial planning act covers both spatial and environmental issues. It defines the concept of carrying capacity and includes definitions of supportive....../cities. Four different sectors (water, food production, waste, and forests) were selected as core areas for decentralised spatial planning. Indicators for SCC and ACC were identified and assessed with regard to relevance and quantifiability. For each of the indicators selected, a legal threshold or guiding...... was introduced inIndonesia 1992 and renewed in 2008. It emphasised the planning role of decentralised authorities. The spatial planning act covers both spatial and environmental issues. It defines the concept of carrying capacity and includes definitions of supportive carrying capacity (SCC) and assimilative...

A Pilot Study On A Moment Carrying Beam-column Connection For Precast Structures

OpenAIRE

Kaplan, Vedat

2010-01-01

In this study, a moment carrying beam-column connection detail for precast structures has been investigated in the experimental and analytical manner. The 1/2 scaled beam-column test specimen is representing a real exterior precast connection detail. The cast-in-situ welded connection is applied at bottom face of the beams and additional re-bars and cast-in-situ concrete is introduced at the upper part of the beams. The experimental study is conducted in the form of varying beam top diplaceme...

Analytical validation of Gentian NGAL particle-enhanced enhanced turbidimetric immunoassay (PETIA

Directory of Open Access Journals (Sweden)

Gian Luca Salvagno

2017-08-01

Full Text Available Objectives: This study was designed to validate the analytical performance of the new Gentian particle-enhanced enhanced turbidimetric immunoassay (PETIA for measuring neutrophil gelatinase-associated lipocalin (NGAL in serum samples. Design and methods: Analytical validation of the Gentian NGAL assay was carried out on a Roche Cobas c501 and was based on assessment of limit of blank (LOB, limit of detection (LOD, functional sensitivity, imprecision, linearity and concordance with the BioPorto NGAL test. Results: The LOB and LOD of Gentian NGAL were found to be 3.8 ng/mL and 6.3 ng/mL, respectively. An analytical coefficient of variation (CV of 20% corresponded to a NGAL value of 10 ng/mL. The intra-assay and inter-assay imprecision (CV was between 0.4 and 5.2% and 0.6 and 7.1% and the total imprecision (CV was 3.7%. The linearity was optimal at NGAL concentrations between 37 and 1420 ng/mL (r=1.00; p<0.001. An excellent correlation was observed between values measured with Gentian NGAL and BioPorto NGAL in 74 routine serum samples (r=0.993. The mean percentage bias of the Gentian assay versus the Bioporto assay was +3.1% (95% CI, +1.6% to +4.5%. Conclusions: These results show that Gentian NGAL may be a viable option to other commercial immunoassays for both routine and urgent assessment of serum NGAL. Keywords: Neutrophil gelatinase-associated lipocalin, NGAL, Analytical validation, Acute kidney injury

Methodological procedures and analytical instruments to evaluate an indicators integrated archive for urban management

International Nuclear Information System (INIS)

Del Ciello, R.; Napoleoni, S.

1998-01-01

This guide provides the results of a research developed at ENEA (National Agency for new Technology, Energy and the Environment) Casaccia center (Rome, Italy) aimed to define methodological procedures and analytical instruments needed to carry out an indicators integrated archive for urban management. The guide also defines the scheme of a negotiation process aimed to reach and exchange data and information among governmental and local administrations, non-governmental organizations and scientific bodies [it

Heat Conduction Analysis Using Semi Analytical Finite Element Method

International Nuclear Information System (INIS)

Wargadipura, A. H. S.

1997-01-01

Heat conduction problems are very often found in science and engineering fields. It is of accrual importance to determine quantitative descriptions of this important physical phenomena. This paper discusses the development and application of a numerical formulation and computation that can be used to analyze heat conduction problems. The mathematical equation which governs the physical behaviour of heat conduction is in the form of second order partial differential equations. The numerical resolution used in this paper is performed using the finite element method and Fourier series, which is known as semi-analytical finite element methods. The numerical solution results in simultaneous algebraic equations which is solved using the Gauss elimination methodology. The computer implementation is carried out using FORTRAN language. In the final part of the paper, a heat conduction problem in a rectangular plate domain with isothermal boundary conditions in its edge is solved to show the application of the computer program developed and also a comparison with analytical solution is discussed to assess the accuracy of the numerical solution obtained

Radioecological monitoring carried out near the Gravelines NPP. Report of 2014 results. Comments and perspectives

International Nuclear Information System (INIS)

Bernollin, A.; Barbey, P.; Boilley, D.; Josset, M.; Dolignon, D.; Rougier, G.; Dunand, E.

2015-01-01

The local information committee (CLI) of Gravelines NPP requested an independent survey of radioactivity levels in the environment for 2014.This survey was carried out by the ACRO organization according to applicable standards and common practices. Even if Gravelines NPP effluents have been the primary aim of the survey, other possible contributions like those from other French and UK NPPs, Areva's reprocessing plants and all past atomic bomb and Chernobyl fallouts, have been considered too. The report presents: the sampling performed, the results of the analyses made (gamma spectroscopy and liquid scintillation) and the comments of these analyses (artificial radioactivity in algae, molluscs, sediments, waters (tritium), foodstuff/vegetables, terrestrial ecosystems). Finally, a comparison is made with the previous 2010 survey and with other data from the Normandy coastline

Analytic expressions for mode conversion in a plasma with a parabolic density profile: Generalized results

International Nuclear Information System (INIS)

Hinkel-Lipsker, D.E.; Fried, B.D.; Morales, G.J.

1993-01-01

This study provides an analytic solution to the general problem of mode conversion in an unmagnetized plasma. Specifically, an electromagnetic wave of frequency ω propagating through a plasma with a parabolic density profile of scale length L p is examined. The mode conversion points are located a distance Δ 0 from the peak of the profile, where the electron plasma frequency ω p (z) matches the wave frequency ω. The corresponding reflection, transmission, and mode conversion coefficients are expressed analytically in terms of parabolic cylinder functions for all values of Δ 0 . The method of solution is based on a source approximation technique that is valid when the electromagnetic and electrostatic scale lengths are well separated. For large Δ 0 , i.e., (cL p /ω) 1/2 much-lt Δ 0 p , the appropriately scaled result [D. E. Hinkel-Lipsker et al., Phys. Fluids B 4, 559 (1992)] for a linear density profile is recovered as the parabolic cylinder functions asymptotically become Airy functions. When Δ 0 →0, the special case of conversion at the peak of the profile [D. E. Hinkel-Lipsker et al., Phys. Fluids B 4, 1772 (1992)] is obtained

Green analytical chemistry introduction to chloropropanols determination at no economic and analytical performance costs?

Science.gov (United States)

Jędrkiewicz, Renata; Orłowski, Aleksander; Namieśnik, Jacek; Tobiszewski, Marek

2016-01-15

In this study we perform ranking of analytical procedures for 3-monochloropropane-1,2-diol determination in soy sauces by PROMETHEE method. Multicriteria decision analysis was performed for three different scenarios - metrological, economic and environmental, by application of different weights to decision making criteria. All three scenarios indicate capillary electrophoresis-based procedure as the most preferable. Apart from that the details of ranking results differ for these three scenarios. The second run of rankings was done for scenarios that include metrological, economic and environmental criteria only, neglecting others. These results show that green analytical chemistry-based selection correlates with economic, while there is no correlation with metrological ones. This is an implication that green analytical chemistry can be brought into laboratories without analytical performance costs and it is even supported by economic reasons. Copyright © 2015 Elsevier B.V. All rights reserved.

Monte Carlo and analytical model predictions of leakage neutron exposures from passively scattered proton therapy

International Nuclear Information System (INIS)

Pérez-Andújar, Angélica; Zhang, Rui; Newhauser, Wayne

2013-01-01

Purpose: Stray neutron radiation is of concern after radiation therapy, especially in children, because of the high risk it might carry for secondary cancers. Several previous studies predicted the stray neutron exposure from proton therapy, mostly using Monte Carlo simulations. Promising attempts to develop analytical models have also been reported, but these were limited to only a few proton beam energies. The purpose of this study was to develop an analytical model to predict leakage neutron equivalent dose from passively scattered proton beams in the 100-250-MeV interval.Methods: To develop and validate the analytical model, the authors used values of equivalent dose per therapeutic absorbed dose (H/D) predicted with Monte Carlo simulations. The authors also characterized the behavior of the mean neutron radiation-weighting factor, w R , as a function of depth in a water phantom and distance from the beam central axis.Results: The simulated and analytical predictions agreed well. On average, the percentage difference between the analytical model and the Monte Carlo simulations was 10% for the energies and positions studied. The authors found that w R was highest at the shallowest depth and decreased with depth until around 10 cm, where it started to increase slowly with depth. This was consistent among all energies.Conclusion: Simple analytical methods are promising alternatives to complex and slow Monte Carlo simulations to predict H/D values. The authors' results also provide improved understanding of the behavior of w R which strongly depends on depth, but is nearly independent of lateral distance from the beam central axis

Comparison of Three Analytical Methods for Separation of Mineral and Chelated Fraction from an Adulterated Zn-EDTA Fertilizer

International Nuclear Information System (INIS)

Khan, M.S.; Qazi, M.A.; Khan, N.A.; Mian, S.M.; Ahmed, N.; Ahmed, N.

2013-01-01

Summary: Different analytical procedures are being employed in the world to quantify the chelated portion in a Zn-EDTA fertilizer. Agriculture Department, Government of the Punjab is following Shahid's analytical method in this regard. This method is based on Ion-chromatography (IC) that separates the mineral zinc (Zn) from an adulterated Zn-EDTA fertilizer sample i.e. mixture of mineral and chelated Zn fractions. To find out its effectiveness and suitability, this comparative study was carried out by analyzing adulterated, non-adulterated Zn-EDTA standard and Zn-EDTA samples taken from market in thrice following three methods namely Shahid's (IC) analytical method, Atomic Absorption Spectrophotometric (AAS) method based on the principle of precipitating the mineral Zn fraction at high pH value by using alkali solution of suitable concentration and analysis of filtrate containing only chelated fraction and Association of Official Analytical Chemists (AOAC) method FM-841 respectively. Adulterated Zn-EDTA samples were prepared by mixing of known quantity of mineral Zn with chelated Zn-EDTA standard. The results showed that Shahid's analytical method and AAS method, both successfully estimated the chelated fraction. The AOAC FM-841 method was insensitive to put a ceiling on the mineral fraction hence did not furnish the reliable results. The Shahid's analytical method was selected being equallyeffective to produce reliable results both for solid and liquid Zn-EDTA samples. The AAS method was comparable in only liquid samples. (author)

Large-scale data analytics

CERN Document Server

Gkoulalas-Divanis, Aris

2014-01-01

Provides cutting-edge research in large-scale data analytics from diverse scientific areas Surveys varied subject areas and reports on individual results of research in the field Shares many tips and insights into large-scale data analytics from authors and editors with long-term experience and specialization in the field

Results of an interlaboratory comparison of analytical methods for contaminants of emerging concern in water.

Science.gov (United States)

Vanderford, Brett J; Drewes, Jörg E; Eaton, Andrew; Guo, Yingbo C; Haghani, Ali; Hoppe-Jones, Christiane; Schluesener, Michael P; Snyder, Shane A; Ternes, Thomas; Wood, Curtis J

2014-01-07

An evaluation of existing analytical methods used to measure contaminants of emerging concern (CECs) was performed through an interlaboratory comparison involving 25 research and commercial laboratories. In total, 52 methods were used in the single-blind study to determine method accuracy and comparability for 22 target compounds, including pharmaceuticals, personal care products, and steroid hormones, all at ng/L levels in surface and drinking water. Method biases ranged from caffeine, NP, OP, and triclosan had false positive rates >15%. In addition, some methods reported false positives for 17β-estradiol and 17α-ethynylestradiol in unspiked drinking water and deionized water, respectively, at levels higher than published predicted no-effect concentrations for these compounds in the environment. False negative rates were also generally contamination, misinterpretation of background interferences, and/or inappropriate setting of detection/quantification levels for analysis at low ng/L levels. The results of both comparisons were collectively assessed to identify parameters that resulted in the best overall method performance. Liquid chromatography-tandem mass spectrometry coupled with the calibration technique of isotope dilution were able to accurately quantify most compounds with an average bias of <10% for both matrixes. These findings suggest that this method of analysis is suitable at environmentally relevant levels for most of the compounds studied. This work underscores the need for robust, standardized analytical methods for CECs to improve data quality, increase comparability between studies, and help reduce false positive and false negative rates.

Assessment of the possibility of increasing a load - carrying strength of truss bridges of overhead travelling cranes

Directory of Open Access Journals (Sweden)

Michał MUSIOŁ

2012-01-01

Full Text Available A possibility of increasing the load-carrying strength of truss bridges of overhead travelling cranes by transferring a part of a useful load from the main truss (which transfers directly the load originated from road wheels of the crane carriage on the parallel auxiliary truss by means of increasing rigidity of truss members joining both trusses - was presented in the paper. The verification of a static relief of the main truss by the auxiliary one as a function of rigidity of transverse and skew space trusses was performed. The A. Blum method was used in analytical calculations. The obtained results were verified by means of the ANSYS 12.1 program utilising the finite element method (FEM.

Generation of electrical energy using lead zirconate titanate (PZT-5A) piezoelectric material: Analytical, numerical and experimental verifications

Energy Technology Data Exchange (ETDEWEB)

Butt, Zubair; Ahmad, Nasir [Dept. of Mechanical, Mechatronics and Manufacturing Engineering, UET Lahore, Faisalabad Campus, Lahore (Pakistan); Pasha, Riffat Asim; Qayyum, Faisal; Anjum, Zeeshan [Dept. of Mechanical Engineering, University of Engineering and Technology, Taxila (Pakistan); Elahi, Hassan [Northwestern Polytechnical University, Xian (China)

2016-08-15

Energy harvesting is the process of attaining energy from the external sources and transforming it into usable electrical energy. An analytical model of piezoelectric energy harvester has been developed to determine the output voltage across an electrical circuit when it is forced to undergo a base excitation. This model gives an easy approach to design and investigate the behavior of piezoelectric material. Numerical simulations have been carried out to determine the effect of frequency and loading on a Lead zirconate titanate (PZT-5A) piezoelectric material. It has been observed that the output voltage from the harvester increases when loading increases whereas its resonance frequency decreases. The analytical results were found to be in good agreement with the experimental and numerical simulation results.

Network Traffic Analysis With Query Driven VisualizationSC 2005HPC Analytics Results

Energy Technology Data Exchange (ETDEWEB)

Stockinger, Kurt; Wu, Kesheng; Campbell, Scott; Lau, Stephen; Fisk, Mike; Gavrilov, Eugene; Kent, Alex; Davis, Christopher E.; Olinger,Rick; Young, Rob; Prewett, Jim; Weber, Paul; Caudell, Thomas P.; Bethel,E. Wes; Smith, Steve

2005-09-01

Our analytics challenge is to identify, characterize, and visualize anomalous subsets of large collections of network connection data. We use a combination of HPC resources, advanced algorithms, and visualization techniques. To effectively and efficiently identify the salient portions of the data, we rely on a multi-stage workflow that includes data acquisition, summarization (feature extraction), novelty detection, and classification. Once these subsets of interest have been identified and automatically characterized, we use a state-of-the-art-high-dimensional query system to extract data subsets for interactive visualization. Our approach is equally useful for other large-data analysis problems where it is more practical to identify interesting subsets of the data for visualization than to render all data elements. By reducing the size of the rendering workload, we enable highly interactive and useful visualizations. As a result of this work we were able to analyze six months worth of data interactively with response times two orders of magnitude shorter than with conventional methods.

Methods used by Elsam for monitoring precision and accuracy of analytical results

Energy Technology Data Exchange (ETDEWEB)

Hinnerskov Jensen, J [Soenderjyllands Hoejspaendingsvaerk, Faelleskemikerne, Aabenraa (Denmark)

1996-12-01

Performing round robins at regular intervals is the primary method used by ELsam for monitoring precision and accuracy of analytical results. The firs round robin was started in 1974, and today 5 round robins are running. These are focused on: boiler water and steam, lubricating oils, coal, ion chromatography and dissolved gases in transformer oils. Besides the power plant laboratories in Elsam, the participants are power plant laboratories from the rest of Denmark, industrial and commercial laboratories in Denmark, and finally foreign laboratories. The calculated standard deviations or reproducibilities are compared with acceptable values. These values originate from ISO, ASTM and the like, or from own experiences. Besides providing the laboratories with a tool to check their momentary performance, the round robins are vary suitable for evaluating systematic developments on a long term basis. By splitting up the uncertainty according to methods, sample preparation/analysis, etc., knowledge can be extracted from the round robins for use in many other situations. (au)

Kinetics of transformations nucleated on random parallel planes: analytical modelling and computer simulation

International Nuclear Information System (INIS)

Rios, Paulo R; Assis, Weslley L S; Ribeiro, Tatiana C S; Villa, Elena

2012-01-01

In a classical paper, Cahn derived expressions for the kinetics of transformations nucleated on random planes and lines. He used those as a model for nucleation on the boundaries, edges and vertices of a polycrystal consisting of equiaxed grains. In this paper it is demonstrated that Cahn's expression for random planes may be used in situations beyond the scope envisaged in Cahn's original paper. For instance, we derived an expression for the kinetics of transformations nucleated on random parallel planes that is identical to that formerly obtained by Cahn considering random planes. Computer simulation of transformations nucleated on random parallel planes is carried out. It is shown that there is excellent agreement between simulated results and analytical solutions. Such an agreement is to be expected if both the simulation and the analytical solution are correct. (paper)

Paraxial light distribution in the focal region of a lens: a comparison of several analytical solutions and a numerical result

Science.gov (United States)

Wu, Yang; Kelly, Damien P.

2014-12-01

The distribution of the complex field in the focal region of a lens is a classical optical diffraction problem. Today, it remains of significant theoretical importance for understanding the properties of imaging systems. In the paraxial regime, it is possible to find analytical solutions in the neighborhood of the focus, when a plane wave is incident on a focusing lens whose finite extent is limited by a circular aperture. For example, in Born and Wolf's treatment of this problem, two different, but mathematically equivalent analytical solutions, are presented that describe the 3D field distribution using infinite sums of ? and ? type Lommel functions. An alternative solution expresses the distribution in terms of Zernike polynomials, and was presented by Nijboer in 1947. More recently, Cao derived an alternative analytical solution by expanding the Fresnel kernel using a Taylor series expansion. In practical calculations, however, only a finite number of terms from these infinite series expansions is actually used to calculate the distribution in the focal region. In this manuscript, we compare and contrast each of these different solutions to a numerically calculated result, paying particular attention to how quickly each solution converges for a range of different spatial locations behind the focusing lens. We also examine the time taken to calculate each of the analytical solutions. The numerical solution is calculated in a polar coordinate system and is semi-analytic. The integration over the angle is solved analytically, while the radial coordinate is sampled with a sampling interval of ? and then numerically integrated. This produces an infinite set of replicas in the diffraction plane, that are located in circular rings centered at the optical axis and each with radii given by ?, where ? is the replica order. These circular replicas are shown to be fundamentally different from the replicas that arise in a Cartesian coordinate system.

Results from the geological surveys carried out in the Bure laboratory's shafts

International Nuclear Information System (INIS)

Rebours, Herve; Righini, Celine

2010-01-01

sinking, different methods suitable for a reliable evaluation of the damaged zone, caused by to excavation, have been developed. The EDZ (Excavation Damaged Zone) could be associated with a locally increased permeability. The mechanical behaviour was analyzed through convergence and extensometer measurements. The disturbance to the wall was assessed through various measurement methods such as the measurement of sonic velocities, the permeability measurement and VSP measurement in radial boreholes. After the evacuation of muck, the geological team goes down to carry out the survey which consists in: 1. the Installation of a topographic network used during the geological follow-up, 2. the lithologic and sedimentary mapping to describe the lithology of the crossed formations and to evaluate their lateral variability at the shaft scale, 3. the structural survey for the understanding of joints distribution and EDZ characterization, 4. the rock and water sampling, 5. the shooting of the wall shaft with stereoscopic pictures to keep a view of the complete wall shaft before lining. The allowed time to carry out the complete geological survey was about 4 hours. The geological survey allows the study of the formation at another scale than the logging of the borehole carried out in the axis of the shaft. At this scale, some vertical structures like joints or styloliths have been seen and followed over several meters. The sedimentary results showed that there is a very good correlation between the two shafts and confirmed that the upper part of the argillaceous rock formation is more carbonated. No fault was observed in the argillaceous rocks from the geological follow-up of shafts or boreholes drilled on the site. On the Bure URL, only centi-metric joints filled with calcite have been observed in the shafts in more limy levels of the argillaceous rock formation. Nevertheless diagenetic events have been found like septaria or veins with celestite. The structural mapping of the shafts

Weak-field asymptotic theory of tunneling ionization: benchmark analytical results for two-electron atoms

International Nuclear Information System (INIS)

Trinh, Vinh H; Morishita, Toru; Tolstikhin, Oleg I

2015-01-01

The recently developed many-electron weak-field asymptotic theory of tunneling ionization of atoms and molecules in an external static electric field (Tolstikhin et al 2014, Phys. Rev. A 89, 013421) is extended to the first-order terms in the asymptotic expansion in field. To highlight the results, here we present a simple analytical formula giving the rate of tunneling ionization of two-electron atoms H − and He. Comparison with fully-correlated ab initio calculations available for these systems shows that the first-order theory works quantitatively in a wide range of fields up to the onset of over-the-barrier ionization and hence is expected to find numerous applications in strong-field physics. (fast track communication)

Continuous electrophoretic purification of individual analytes from multicomponent mixtures.

Science.gov (United States)

McLaren, David G; Chen, David D Y

2004-04-15

Individual analytes can be isolated from multicomponent mixtures and collected in the outlet vial by carrying out electrophoretic purification through a capillary column. Desired analytes are allowed to migrate continuously through the column under the electric field while undesired analytes are confined to the inlet vial by application of a hydrodynamic counter pressure. Using pressure ramping and buffer replenishment techniques, 18% of the total amount present in a bulk sample can be purified when the resolution to the adjacent peak is approximately 3. With a higher resolution, the yield could be further improved. Additionally, by periodically introducing fresh buffer into the sample, changes in pH and conductivity can be mediated, allowing higher purity (>or=99.5%) to be preserved in the collected fractions. With an additional reversed cycle of flow counterbalanced capillary electrophoresis, any individual component in a sample mixture can be purified providing it can be separated in an electrophoresis system.

Formative assessment and learning analytics

NARCIS (Netherlands)

Tempelaar, D.T.; Heck, A.; Cuypers, H.; van der Kooij, H.; van de Vrie, E.; Suthers, D.; Verbert, K.; Duval, E.; Ochoa, X.

2013-01-01

Learning analytics seeks to enhance the learning process through systematic measurements of learning related data, and informing learners and teachers of the results of these measurements, so as to support the control of the learning process. Learning analytics has various sources of information,

Solar neutrino masses and mixing from bilinear R-parity broken supersymmetry: Analytical versus numerical results

Science.gov (United States)

Díaz, M.; Hirsch, M.; Porod, W.; Romão, J.; Valle, J.

2003-07-01

We give an analytical calculation of solar neutrino masses and mixing at one-loop order within bilinear R-parity breaking supersymmetry, and compare our results to the exact numerical calculation. Our method is based on a systematic perturbative expansion of R-parity violating vertices to leading order. We find in general quite good agreement between the approximate and full numerical calculations, but the approximate expressions are much simpler to implement. Our formalism works especially well for the case of the large mixing angle Mikheyev-Smirnov-Wolfenstein solution, now strongly favored by the recent KamLAND reactor neutrino data.

Tank 241-T-105, cores 205 and 207 analytical results for the final report

International Nuclear Information System (INIS)

Esch, R.A.

1997-01-01

This document is the final laboratory report for tank 241-T-105 push mode core segments collected between June 24, 1997 and June 30, 1997. The segments were subsampled and analyzed in accordance with the Tank Push Mode Core Sampling and Analysis Plan (TSAP) (Field,1997), the Tank Safety Screening Data Quality Objective (Safety DQO) (Dukelow, et al., 1995) and Tank 241-T-105 Sample Analysis (memo) (Field, 1997a). The analytical results are included in Table 1. None of the subsamples submitted for the differential scanning calorimetry (DSC) analysis or total alpha activity (AT) exceeded the notification limits as stated in the TSAP (Field, 1997). The statistical results of the 95% confidence interval on the mean calculations are provided by the Tank Waste Remediation Systems (TWRS) Technical Basis Group in accordance with the Memorandum of Understanding (Schreiber, 1997) and not considered in this report

The analytical center of INP - experience of becoming prospect of development

International Nuclear Information System (INIS)

Kadyrzhanov, K.K.; Kozhakhmetov, S.K.

2004-01-01

Full text: In 2001 in INP NNC RK the Analytical center has been organized as separate structural division. The primary goal of the Analytical center is all-round use of the scientific and technical potential, which has been saved up in INP NNC RK for the organization and carrying out of researches, actual for, first of all for the domestic companies, scientific institutes and the foreign companies working in Kazakhstan. In the report data on the equipment with which the Analytical center for performance of works is equipped are resulted. For these purposes the grants of the international organizations and funds are involved. For example, about two years it is maintained universal X-ray diffractometer Brucker D8 Advance got with support of U.S. CRDF (the project *KR2-993). Under the project *KAR2-1036-AL-03 the same fund in current of 2005 delivery of the specialized equipment for test of corrosion resistance of materials will be made. The site on preparation of materials in created and equipped with the specialized equipment. In the report results, both fundamental works, and data on the applied works executed with various partners - National Atomic Company 'KazAtomProm', Ulba Metallurgical Plant, 'Tengizchevroil' Oil Company, Pharmacological Company named 'B-clay' are discussed, etc. In the report the basic directions of the further development of works and expansions of geography of cooperation are formulated

Pre-concentration technique for reduction in "Analytical instrument requirement and analysis"

Science.gov (United States)

Pal, Sangita; Singha, Mousumi; Meena, Sher Singh

2018-04-01

Availability of analytical instruments for a methodical detection of known and unknown effluents imposes a serious hindrance in qualification and quantification. Several analytical instruments such as Elemental analyzer, ICP-MS, ICP-AES, EDXRF, ion chromatography, Electro-analytical instruments which are not only expensive but also time consuming, required maintenance, damaged essential parts replacement which are of serious concern. Move over for field study and instant detection installation of these instruments are not convenient to each and every place. Therefore, technique such as pre-concentration of metal ions especially for lean stream elaborated and justified. Chelation/sequestration is the key of immobilization technique which is simple, user friendly, most effective, least expensive, time efficient; easy to carry (10g - 20g vial) to experimental field/site has been demonstrated.

Closed form analytic solutions describing glow discharge plasma

International Nuclear Information System (INIS)

Pai, S.T.; Guo, X.M.; Zhou, T.D.

1996-01-01

On the basis of an analytic model developed previously [S. T. Pai, J. Appl. Phys. 71, 5820 (1992)], an improved version of the model for the description of dc glow discharge plasma was successfully developed. A set of closed form solutions was obtained from the governing equations. The two-dimensional, analytic solutions are functional and completely satisfy the governing equations, the actual boundary conditions, and Maxwell equations. They can be readily used to carry out numerical calculations without the necessity of employing any assumed boundary conditions. Results obtained from the model reveal that as the discharge gap spacing or pressure increases the maximum value in the electron density distribution moves toward the cathode. At a sufficiently large value of gap spacing, the positive column phenomenon begins to appear in the discharge region. The model has the capability of treating the positive column and negative glow as a continuous system without the necessity of studying them separately. The model also predicts a sharp rise of the positive ion density near the cathode and field reversal in the anode region. Variation of the electrode radius produces little effect on the axial spatial distribution of physical quantities studied. copyright 1996 American Institute of Physics

Studying the Factors Influencing a Choice of Devices for Carrying Out Inhalations on the Basis of Statistical Processing of Results Of Questionnaire

Directory of Open Access Journals (Sweden)

Galina A. Kharchenko

2016-05-01

Full Text Available Authors set the object, to study the factors influencing a choice of buyers of devices for carrying out inhalation on the basis of statistical processing of results of questionnaire of buyers, to analyze interrelation between the factors influencing a choice and purchase of the device and gender and age characteristics of potential buyers. The role of the doctor, worker of a drugstore, the Internet sites in the course of a choice, opinion of consumers of different age categories on the most preferable sources of information on devices for carrying out inhalation is revealed, preferences of buyers at a choice of a place of commission of purchase of devices for carrying out inhalation are defined. Feature of respondents of sources of information and making decision on purchase, female and male concerning use is shown.

Many analysts, one dataset: Making transparent how variations in analytical choices affect results

NARCIS (Netherlands)

Silberzahn, Raphael; Uhlmann, E.L.; Martin, D.P.; Anselmi, P.; Aust, F.; Awtrey, E.; Bahnik, Š.; Bai, F.; Bannard, C.; Bonnier, E.; Carlsson, R.; Cheung, F.; Christensen, G.; Clay, R.; Craig, M.A.; Dalla Rosa, A.; Dam, Lammertjan; Evans, M.H.; Flores Cervantes, I.; Fong, N.; Gamez-Djokic, M.; Glenz, A.; Gordon-McKeon, S.; Heaton, T.J.; Hederos, K.; Heene, M.; Hofelich Mohr, A.J.; Högden, F.; Hui, K.; Johannesson, M.; Kalodimos, J.; Kaszubowski, E.; Kennedy, D.M.; Lei, R.; Lindsay, T.A.; Liverani, S.; Madan, C.R.; Molden, D.; Molleman, Henricus; Morey, R.D.; Mulder, Laetitia; Nijstad, Bernard; Pope, N.G.; Pope, B.; Prenoveau, J.M.; Rink, Floortje; Robusto, E.; Roderique, H.; Sandberg, A.; Schlüter, E.; Schönbrodt, F.D.; Sherman, M.F.; Sommer, S.A.; Sotak, K.; Spain, S.; Spörlein, C.; Stafford, T.; Stefanutti, L.; Täuber, Susanne; Ullrich, J.; Vianello, M.; Wagenmakers, E.-J.; Witkowiak, M.; Yoon, S.; Nosek, B.A.

2018-01-01

Twenty-nine teams involving 61 analysts used the same dataset to address the same research question: whether soccer referees are more likely to give red cards to dark skin toned players than light skin toned players. Analytic approaches varied widely across teams, and estimated effect sizes ranged

Lab-on-Blu-ray: Low-cost analyte detection on a disk

DEFF Research Database (Denmark)

Donolato, Marco; Antunes, Paula Soares Martins; Burger, Robert

2014-01-01

In this work, we present for the first time a centrifugal microfluidic system for the detection of analytes in blood using a low cost (< 10$) blu-ray pickup head for detection. The microfluidic operations are carried out on a disk, while the detection method is based on optical measurements of th...

Analytic result for the one-loop scalar pentagon integral with massless propagators

International Nuclear Information System (INIS)

Kniehl, Bernd A.; Tarasov, Oleg V.

2010-01-01

The method of dimensional recurrences proposed by one of the authors (O. V.Tarasov, 1996) is applied to the evaluation of the pentagon-type scalar integral with on-shell external legs and massless internal lines. For the first time, an analytic result valid for arbitrary space-time dimension d and five arbitrary kinematic variables is presented. An explicit expression in terms of the Appell hypergeometric function F 3 and the Gauss hypergeometric function 2 F 1 , both admitting one-fold integral representations, is given. In the case when one kinematic variable vanishes, the integral reduces to a combination of Gauss hypergeometric functions 2 F 1 . For the case when one scalar invariant is large compared to the others, the asymptotic values of the integral in terms of Gauss hypergeometric functions 2 F 1 are presented in d=2-2ε, 4-2ε, and 6-2ε dimensions. For multi-Regge kinematics, the asymptotic value of the integral in d=4-2ε dimensions is given in terms of the Appell function F 3 and the Gauss hypergeometric function 2 F 1 . (orig.)

Pressurized thermal shocks: the JRC Ispra experimental test rig and analytical results

International Nuclear Information System (INIS)

Jovanovic, A.; Lucia, A.C.

1990-01-01

The paper tackles some issues of particular interest for the remanent (remaining) life prediction for the pressurized components exposed to pressurized thermal shock (PTS) loads, that have been tackled in analytical work performed in the framework of the MPA - JRC collaboration for the PTS experimental research at the JRC Ispra. These issues regard in general application of damage mechanics, fracture mechanics and artificial intelligence (including the treatment of uncertainties in the PTS analysis and experiments). The considered issues are essential for further understanding and modelling of the crack behaviour and of the component response in PTS conditions. In particular, the development of the FRAP preprocessor and development and implementation of a methodology for analysis of local non-stationary heat transfer coefficients during a PTS, have been explained more in detail. FRAP is used as a frontend, for the finite element code ABAQUS, for the heat transfer, stress and fracture mechanics analyses. The ABAQUS results are used further on, for the probabilistic fatigue crack growth analysis performed by the COVASTOL code. (author)

Analytic result for the one-loop scalar pentagon integral with massless propagators

International Nuclear Information System (INIS)

Kniehl, Bernd A.; Tarasov, Oleg V.

2010-01-01

The method of dimensional recurrences proposed by Tarasov (1996, 2000) is applied to the evaluation of the pentagon-type scalar integral with on-shell external legs and massless internal lines. For the first time, an analytic result valid for arbitrary space-time dimension d and five arbitrary kinematic variables is presented. An explicit expression in terms of the Appell hypergeometric function F 3 and the Gauss hypergeometric function 2 F 1 , both admitting one-fold integral representations, is given. In the case when one kinematic variable vanishes, the integral reduces to a combination of Gauss hypergeometric functions 2 F 1 . For the case when one scalar invariant is large compared to the others, the asymptotic values of the integral in terms of Gauss hypergeometric functions 2 F 1 are presented in d=2-2ε, 4-2ε, and 6-2ε dimensions. For multi-Regge kinematics, the asymptotic value of the integral in d=4-2ε dimensions is given in terms of the Appell function F 3 and the Gauss hypergeometric function 2 F 1 .

Analytical simulations in the field of two-phase flow

International Nuclear Information System (INIS)

Karwat, H.

1978-01-01

Power reactors are designed with engineered safeguards to cope with the consequences of possible failures or malfunctions. Experiments are carried out to verify the analytical simulations used in the design of these engineered safeguards. The paper discusses the basis for the verification of the analytical simulations, the requirements of corresponding experiments used to validitate the analysis and the necessary boundary conditions of the experiment as well as of the reactor systems. A detailed description of a typical boundary condition for real reactor systems is shown to be important, if experimental observations are to be interpreted correctly. Finally, the question will be addressed whether experiments on a larger scale than 1/1000 or 1/100 are necessary to extrapolate experimental observatons to a full scale reactor situation. (author)

Social Learning Analytics in Higher Education. An experience at the Primary Education stage

Directory of Open Access Journals (Sweden)

Jose Javier Díaz-Lázaro

2017-07-01

Full Text Available The concept of Learning Analytics, as we understand it today, is relatively new but the practice of evaluating user behavior is not innovative. For years, technological development, along with other educational aspects, have encouraged, developed and facilitated this practice as a way of providing a personalized quality experience to students. The main goal of this study, carried out in the Primary Education Degree of the University of Murcia, was to research, from the perspective of Social Learning Analytics, how students learn and collaborate in online environments, specifically through their use of social media. With the idea of improving and optimizing future teaching experiences, a pilot study was conducted using weblog, Twitter and Facebook to work with different topics on the subject. The method used in this research was a participant observation and the analysis performed was both quantitative, based mainly on the data gathered from the learning analytics, and qualitative (analyzing students’ content from comments. Results show that there was greater interaction on Facebook than weblogs, where students interacted to deal with aspects related to the learning process and the topic of the subject. This exchange of information grew during the development of the experience. In addition, learning analytics shows that there is a relationship between group members and their interaction and behavior in networks.

Paraxial light distribution in the focal region of a lens: a comparison of several analytical solutions and a numerical result.

Science.gov (United States)

Wu, Yang; Kelly, Damien P

2014-12-12

The distribution of the complex field in the focal region of a lens is a classical optical diffraction problem. Today, it remains of significant theoretical importance for understanding the properties of imaging systems. In the paraxial regime, it is possible to find analytical solutions in the neighborhood of the focus, when a plane wave is incident on a focusing lens whose finite extent is limited by a circular aperture. For example, in Born and Wolf's treatment of this problem, two different, but mathematically equivalent analytical solutions, are presented that describe the 3D field distribution using infinite sums of [Formula: see text] and [Formula: see text] type Lommel functions. An alternative solution expresses the distribution in terms of Zernike polynomials, and was presented by Nijboer in 1947. More recently, Cao derived an alternative analytical solution by expanding the Fresnel kernel using a Taylor series expansion. In practical calculations, however, only a finite number of terms from these infinite series expansions is actually used to calculate the distribution in the focal region. In this manuscript, we compare and contrast each of these different solutions to a numerically calculated result, paying particular attention to how quickly each solution converges for a range of different spatial locations behind the focusing lens. We also examine the time taken to calculate each of the analytical solutions. The numerical solution is calculated in a polar coordinate system and is semi-analytic. The integration over the angle is solved analytically, while the radial coordinate is sampled with a sampling interval of [Formula: see text] and then numerically integrated. This produces an infinite set of replicas in the diffraction plane, that are located in circular rings centered at the optical axis and each with radii given by [Formula: see text], where [Formula: see text] is the replica order. These circular replicas are shown to be fundamentally

Web Analytics

Science.gov (United States)

EPA’s Web Analytics Program collects, analyzes, and provides reports on traffic, quality assurance, and customer satisfaction metrics for EPA’s website. The program uses a variety of analytics tools, including Google Analytics and CrazyEgg.

An analytic thomism?

Directory of Open Access Journals (Sweden)

Daniel Alejandro Pérez Chamorro.

2012-12-01

Full Text Available For 50 years the philosophers of the Anglo-Saxon analytic tradition (E. Anscombre, P. Geach, A. Kenny, P. Foot have tried to follow the Thomas Aquinas School which they use as a source to surpass the Cartesian Epistemology and to develop the virtue ethics. Recently, J. Haldane has inaugurated a program of “analytical thomism” which main result until the present has been his “theory of identity mind/world”. Nevertheless, none of Thomás’ admirers has still found the means of assimilating his metaphysics of being.

An analytic Pade-motivated QCD coupling

International Nuclear Information System (INIS)

Martinez, H. E.; Cvetic, G.

2010-01-01

We consider a modification of the Minimal Analytic (MA) coupling of Shirkov and Solovtsov. This modified MA (mMA) coupling reflects the desired analytic properties of the space-like observables. We show that an approximation by Dirac deltas of its discontinuity function ρ is equivalent to a Pade(rational) approximation of the mMA coupling that keeps its analytic structure. We propose a modification to mMA that, as preliminary results indicate, could be an improvement in the evaluation of low-energy observables compared with other analytic couplings.

Collaborative Visual Analytics: A Health Analytics Approach to Injury Prevention

Directory of Open Access Journals (Sweden)

Samar Al-Hajj

2017-09-01

Full Text Available Background: Accurate understanding of complex health data is critical in order to deal with wicked health problems and make timely decisions. Wicked problems refer to ill-structured and dynamic problems that combine multidimensional elements, which often preclude the conventional problem solving approach. This pilot study introduces visual analytics (VA methods to multi-stakeholder decision-making sessions about child injury prevention; Methods: Inspired by the Delphi method, we introduced a novel methodology—group analytics (GA. GA was pilot-tested to evaluate the impact of collaborative visual analytics on facilitating problem solving and supporting decision-making. We conducted two GA sessions. Collected data included stakeholders’ observations, audio and video recordings, questionnaires, and follow up interviews. The GA sessions were analyzed using the Joint Activity Theory protocol analysis methods; Results: The GA methodology triggered the emergence of ‘common ground’ among stakeholders. This common ground evolved throughout the sessions to enhance stakeholders’ verbal and non-verbal communication, as well as coordination of joint activities and ultimately collaboration on problem solving and decision-making; Conclusions: Understanding complex health data is necessary for informed decisions. Equally important, in this case, is the use of the group analytics methodology to achieve ‘common ground’ among diverse stakeholders about health data and their implications.

Collaborative Visual Analytics: A Health Analytics Approach to Injury Prevention.

Science.gov (United States)

Al-Hajj, Samar; Fisher, Brian; Smith, Jennifer; Pike, Ian

2017-09-12

Background : Accurate understanding of complex health data is critical in order to deal with wicked health problems and make timely decisions. Wicked problems refer to ill-structured and dynamic problems that combine multidimensional elements, which often preclude the conventional problem solving approach. This pilot study introduces visual analytics (VA) methods to multi-stakeholder decision-making sessions about child injury prevention; Methods : Inspired by the Delphi method, we introduced a novel methodology-group analytics (GA). GA was pilot-tested to evaluate the impact of collaborative visual analytics on facilitating problem solving and supporting decision-making. We conducted two GA sessions. Collected data included stakeholders' observations, audio and video recordings, questionnaires, and follow up interviews. The GA sessions were analyzed using the Joint Activity Theory protocol analysis methods; Results : The GA methodology triggered the emergence of ' common g round ' among stakeholders. This common ground evolved throughout the sessions to enhance stakeholders' verbal and non-verbal communication, as well as coordination of joint activities and ultimately collaboration on problem solving and decision-making; Conclusion s : Understanding complex health data is necessary for informed decisions. Equally important, in this case, is the use of the group analytics methodology to achieve ' common ground' among diverse stakeholders about health data and their implications.

An Investigation to Manufacturing Analytical Services Composition using the Analytical Target Cascading Method.

Science.gov (United States)

Tien, Kai-Wen; Kulvatunyou, Boonserm; Jung, Kiwook; Prabhu, Vittaldas

2017-01-01

As cloud computing is increasingly adopted, the trend is to offer software functions as modular services and compose them into larger, more meaningful ones. The trend is attractive to analytical problems in the manufacturing system design and performance improvement domain because 1) finding a global optimization for the system is a complex problem; and 2) sub-problems are typically compartmentalized by the organizational structure. However, solving sub-problems by independent services can result in a sub-optimal solution at the system level. This paper investigates the technique called Analytical Target Cascading (ATC) to coordinate the optimization of loosely-coupled sub-problems, each may be modularly formulated by differing departments and be solved by modular analytical services. The result demonstrates that ATC is a promising method in that it offers system-level optimal solutions that can scale up by exploiting distributed and modular executions while allowing easier management of the problem formulation.

On New Families of Integrals in Analytical Studies of Superconductors within the Conformal Transformation Method

Directory of Open Access Journals (Sweden)

Ryszard Gonczarek

2015-01-01

Full Text Available We show that, by applying the conformal transformation method, strongly correlated superconducting systems can be discussed in terms of the Fermi liquid with a variable density of states function. Within this approach, it is possible to formulate and carry out purely analytical study based on a set of fundamental equations. After presenting the mathematical structure of the s-wave superconducting gap and other quantitative characteristics of superconductors, we evaluate and discuss integrals inherent in fundamental equations describing superconducting systems. The results presented here extend the approach formulated by Abrikosov and Maki, which was restricted to the first-order expansion. A few infinite families of integrals are derived and allow us to express the fundamental equations by means of analytical formulas. They can be then exploited in order to find quantitative characteristics of superconducting systems by the method of successive approximations. We show that the results can be applied in studies of high-Tc superconductors and other superconducting materials of the new generation.

Making Decisions by Analytical Chemistry

DEFF Research Database (Denmark)

Andersen, Jens Enevold Thaulov

. These discrepancies are very unfortunate because erroneous conclusions may arise from an otherwise meticulous and dedicated effort of research staff. This may eventually lead to unreliable conclusions thus jeopardizing investigations of environmental monitoring, climate changes, food safety, clinical chemistry......It has been long recognized that results of analytical chemistry are not flawless, owing to the fact that professional laboratories and research laboratories analysing the same type of samples by the same type of instruments are likely to obtain significantly different results. The European......, forensics and other fields of science where analytical chemistry is the key instrument of decision making. In order to elucidate the potential origin of the statistical variations found among laboratories, a major program was undertaken including several analytical technologies where the purpose...

Exact Analytic Result of Contact Value for the Density in a Modified Poisson-Boltzmann Theory of an Electrical Double Layer.

Science.gov (United States)

Lou, Ping; Lee, Jin Yong

2009-04-14

For a simple modified Poisson-Boltzmann (SMPB) theory, taking into account the finite ionic size, we have derived the exact analytic expression for the contact values of the difference profile of the counterion and co-ion, as well as of the sum (density) and product profiles, near a charged planar electrode that is immersed in a binary symmetric electrolyte. In the zero ionic size or dilute limit, these contact values reduce to the contact values of the Poisson-Boltzmann (PB) theory. The analytic results of the SMPB theory, for the difference, sum, and product profiles were compared with the results of the Monte-Carlo (MC) simulations [ Bhuiyan, L. B.; Outhwaite, C. W.; Henderson, D. J. Electroanal. Chem. 2007, 607, 54 ; Bhuiyan, L. B.; Henderson, D. J. Chem. Phys. 2008, 128, 117101 ], as well as of the PB theory. In general, the analytic expression of the SMPB theory gives better agreement with the MC data than the PB theory does. For the difference profile, as the electrode charge increases, the result of the PB theory departs from the MC data, but the SMPB theory still reproduces the MC data quite well, which indicates the importance of including steric effects in modeling diffuse layer properties. As for the product profile, (i) it drops to zero as the electrode charge approaches infinity; (ii) the speed of the drop increases with the ionic size, and these behaviors are in contrast with the predictions of the PB theory, where the product is identically 1.

Analytical evaluation of the roller bearing service life

Directory of Open Access Journals (Sweden)

Antsupov Aleksey

2017-01-01

Full Text Available An analytical method has been developed for the design evaluation of the service life of roller bearings by the criterion of contact endurance of elements that does not require carrying out the experimental studies. It is based on the kinetic approach to the description of the solids destruction process and the theory of parametric reliability of machine parts. In contradistinction to the standard empirical dependence, which is currently used, the method allows one to take into account the effect of the material properties, and basic design and operational parameters on the service life. The results of the theoretical studies of the service life of roller bearing No. 212 (DIN 5412 T1 are presented for the quantitative assessment of this effect. They showed that the temperature-force loading conditions or material properties that were not taken into account might result in the prediction error of 1.5 or more times.

Modern Analytical Chemistry in the Contemporary World

Science.gov (United States)

Šíma, Jan

2016-01-01

Students not familiar with chemistry tend to misinterpret analytical chemistry as some kind of the sorcery where analytical chemists working as modern wizards handle magical black boxes able to provide fascinating results. However, this approach is evidently improper and misleading. Therefore, the position of modern analytical chemistry among…

Micro-homogeneity of candidate reference materials: Results from an intercomparison study for the Analytical Quality Control Services (AQCS) of the IAEA

International Nuclear Information System (INIS)

Rossbach, M.; Kniewald, G.

2002-01-01

The IAEA Analytical Quality Control Services (AQCS) has made available two single cell algae materials IAEA-392 and IAEA-393 as well as an urban dust IAEA-396 to study their use for analytical sample sizes in the milligram range and below. Micro-analytical techniques such as PIXE and μ-PIXE, solid sampling AAS, scanning electron microprobe X-ray analysis and INAA were applied to the determination of trace elements on the basis of μg to mg amounts of the selected materials. The comparability of the mean values as well as the reproducibility of successive measurements is being evaluated in order to compare relative homogeneity factors for many elements in the investigated materials. From the reported results it seems that the algae materials IAEA-392 and IAEA-393 are extremely homogeneous biological materials for a number of elements with an extraordinary sharp particle size distribution below 10 μm. A similar situation seems to hold for the urban dust material IAEA-396 which had been air-jet milled to a particle size distribution around 4 μm. The introduction of these materials as CRMs with very small amounts needed to determine the certified concentrations will help to meet the needs of micro-analytical techniques for natural matrix reference materials. (author)

An analytical model for nanoparticles concentration resulting from infusion into poroelastic brain tissue.

Science.gov (United States)

Pizzichelli, G; Di Michele, F; Sinibaldi, E

2016-02-01

We consider the infusion of a diluted suspension of nanoparticles (NPs) into poroelastic brain tissue, in view of relevant biomedical applications such as intratumoral thermotherapy. Indeed, the high impact of the related pathologies motivates the development of advanced therapeutic approaches, whose design also benefits from theoretical models. This study provides an analytical expression for the time-dependent NPs concentration during the infusion into poroelastic brain tissue, which also accounts for particle binding onto cells (by recalling relevant results from the colloid filtration theory). Our model is computationally inexpensive and, compared to fully numerical approaches, permits to explicitly elucidate the role of the involved physical aspects (tissue poroelasticity, infusion parameters, NPs physico-chemical properties, NP-tissue interactions underlying binding). We also present illustrative results based on parameters taken from the literature, by considering clinically relevant ranges for the infusion parameters. Moreover, we thoroughly assess the model working assumptions besides discussing its limitations. While not laying any claims of generality, our model can be used to support the development of more ambitious numerical approaches, towards the preliminary design of novel therapies based on NPs infusion into brain tissue. Copyright © 2015 Elsevier Inc. All rights reserved.

ORBITALES. A program for the calculation of wave functions with an analytical central potential

International Nuclear Information System (INIS)

Yunta Carretero; Rodriguez Mayquez, E.

1974-01-01

In this paper is described the objective, basis, carrying out in FORTRAN language and use of the program ORBITALES. This program calculate atomic wave function in the case of ths analytical central potential (Author) 8 refs

Results of the Study of Helminths-Carrying as a Comorbidity in Children with Herpetic Stomatitis

Directory of Open Access Journals (Sweden)

E.S. Suerkulov

2016-09-01

Full Text Available The paper analyzes the helminths-carrying in children with herpetic stomatitis according to the data of the department of maxillofacial surgery of the National center of mother and child welfare, and determines the relationship of oral diseases with disorders of various parts of the gastrointestinal tract.

E-Books in Academic Libraries: Results of a Survey Carried out in Sweden and Lithuania

Science.gov (United States)

Maceviciute, Elena; Wilson, T. D.; Gudinavicius, Arunas; Šuminas, Andrius

2017-01-01

Introduction: This paper reports on a study of e-books issues in academic libraries in two European countries representative of small language markets--Sweden and Lithuania. Method: Questionnaire surveys, using the same instrument, were carried out in Swedish and Lithuanian academic libraries. Analysis: Quantitative analysis was performed using…

Analytical modeling of wet compression of gas turbine systems

International Nuclear Information System (INIS)

Kim, Kyoung Hoon; Ko, Hyung-Jong; Perez-Blanco, Horacio

2011-01-01

Evaporative gas turbine cycles (EvGT) are of importance to the power generation industry because of the potential of enhanced cycle efficiencies with moderate incremental cost. Humidification of the working fluid to result in evaporative cooling during compression is a key operation in these cycles. Previous simulations of this operation were carried out via numerical integration. The present work is aimed at modeling the wet-compression process with approximate analytical solutions instead. A thermodynamic analysis of the simultaneous heat and mass transfer processes that occur during evaporation is presented. The transient behavior of important variables in wet compression such as droplet diameter, droplet mass, gas and droplet temperature, and evaporation rate is investigated. The effects of system parameters on variables such as droplet evaporation time, compressor outlet temperature and input work are also considered. Results from this work exhibit good agreement with those of previous numerical work.

Analytic number theory

CERN Document Server

Iwaniec, Henryk

2004-01-01

Analytic Number Theory distinguishes itself by the variety of tools it uses to establish results, many of which belong to the mainstream of arithmetic. One of the main attractions of analytic number theory is the vast diversity of concepts and methods it includes. The main goal of the book is to show the scope of the theory, both in classical and modern directions, and to exhibit its wealth and prospects, its beautiful theorems and powerful techniques. The book is written with graduate students in mind, and the authors tried to balance between clarity, completeness, and generality. The exercis

Valid analytical performance specifications for combined analytical bias and imprecision for the use of common reference intervals.

Science.gov (United States)

Hyltoft Petersen, Per; Lund, Flemming; Fraser, Callum G; Sandberg, Sverre; Sölétormos, György

2018-01-01

Background Many clinical decisions are based on comparison of patient results with reference intervals. Therefore, an estimation of the analytical performance specifications for the quality that would be required to allow sharing common reference intervals is needed. The International Federation of Clinical Chemistry (IFCC) recommended a minimum of 120 reference individuals to establish reference intervals. This number implies a certain level of quality, which could then be used for defining analytical performance specifications as the maximum combination of analytical bias and imprecision required for sharing common reference intervals, the aim of this investigation. Methods Two methods were investigated for defining the maximum combination of analytical bias and imprecision that would give the same quality of common reference intervals as the IFCC recommendation. Method 1 is based on a formula for the combination of analytical bias and imprecision and Method 2 is based on the Microsoft Excel formula NORMINV including the fractional probability of reference individuals outside each limit and the Gaussian variables of mean and standard deviation. The combinations of normalized bias and imprecision are illustrated for both methods. The formulae are identical for Gaussian and log-Gaussian distributions. Results Method 2 gives the correct results with a constant percentage of 4.4% for all combinations of bias and imprecision. Conclusion The Microsoft Excel formula NORMINV is useful for the estimation of analytical performance specifications for both Gaussian and log-Gaussian distributions of reference intervals.

Novel permanent magnet linear motor with isolated movers: analytical, numerical and experimental study.

Science.gov (United States)

Yan, Liang; Peng, Juanjuan; Jiao, Zongxia; Chen, Chin-Yin; Chen, I-Ming

2014-10-01

This paper proposes a novel permanent magnet linear motor possessing two movers and one stator. The two movers are isolated and can interact with the stator poles to generate independent forces and motions. Compared with conventional multiple motor driving system, it helps to increase the system compactness, and thus improve the power density and working efficiency. The magnetic field distribution is obtained by using equivalent magnetic circuit method. Following that, the formulation of force output considering armature reaction is carried out. Then inductances are analyzed with finite element method to investigate the relationships of the two movers. It is found that the mutual-inductances are nearly equal to zero, and thus the interaction between the two movers is negligible. A research prototype of the linear motor and a measurement apparatus on thrust force have been developed. Both numerical computation and experiment measurement are conducted to validate the analytical model of thrust force. Comparison shows that the analytical model matches the numerical and experimental results well.

Efficient Online Processing for Advanced Analytics

OpenAIRE

El Seidy, Mohamed Elsayed Mohamed Ahmed

2017-01-01

With the advent of emerging technologies and the Internet of Things, the importance of online data analytics has become more pronounced. Businesses and companies are adopting approaches that provide responsive analytics to stay competitive in the global marketplace. Online analytics allow data analysts to promptly react to patterns or to gain preliminary insights from early results that aid in research, decision making, and effective strategy planning. The growth of data-velocity in a variety...

Concurrence of big data analytics and healthcare: A systematic review.

Science.gov (United States)

Mehta, Nishita; Pandit, Anil

2018-06-01

The application of Big Data analytics in healthcare has immense potential for improving the quality of care, reducing waste and error, and reducing the cost of care. This systematic review of literature aims to determine the scope of Big Data analytics in healthcare including its applications and challenges in its adoption in healthcare. It also intends to identify the strategies to overcome the challenges. A systematic search of the articles was carried out on five major scientific databases: ScienceDirect, PubMed, Emerald, IEEE Xplore and Taylor & Francis. The articles on Big Data analytics in healthcare published in English language literature from January 2013 to January 2018 were considered. Descriptive articles and usability studies of Big Data analytics in healthcare and medicine were selected. Two reviewers independently extracted information on definitions of Big Data analytics; sources and applications of Big Data analytics in healthcare; challenges and strategies to overcome the challenges in healthcare. A total of 58 articles were selected as per the inclusion criteria and analyzed. The analyses of these articles found that: (1) researchers lack consensus about the operational definition of Big Data in healthcare; (2) Big Data in healthcare comes from the internal sources within the hospitals or clinics as well external sources including government, laboratories, pharma companies, data aggregators, medical journals etc.; (3) natural language processing (NLP) is most widely used Big Data analytical technique for healthcare and most of the processing tools used for analytics are based on Hadoop; (4) Big Data analytics finds its application for clinical decision support; optimization of clinical operations and reduction of cost of care (5) major challenge in adoption of Big Data analytics is non-availability of evidence of its practical benefits in healthcare. This review study unveils that there is a paucity of information on evidence of real-world use of

The Usefulness of Analytical Procedures - An Empirical Approach in the Auditing Sector in Portugal

Directory of Open Access Journals (Sweden)

Carlos Pinho

2014-08-01

Full Text Available The conceptual conflict between the efficiency and efficacy on financial auditing arises from the fact that resources are scarce, both in terms of the time available to carry out the audit and the quality and timeliness of the information available to the external auditor. Audits tend to be more efficient, the lower the combination of inherent risk and control risk is assessed to be, allowing the auditor to carry out less extensive and less timely auditing tests, meaning that in some cases analytical audit procedures are a good tool to support the opinions formed by the auditor. This research, by means of an empirical study of financial auditing in Portugal, aims to evaluate the extent to which analytical procedures are used during a financial audit engagement in Portugal, throughout the different phases involved in auditing. The conclusions point to the fact that, in general terms and regardless of the size of the audit company and the way in which professionals work, Portuguese auditors use analytical procedures more frequently during the planning phase rather than during the phase of evidence gathering and the phase of opinion formation.

Analytical formulation of directly modulated OOFDM signals transmitted over an IM/DD dispersive link.

Science.gov (United States)

Sánchez, C; Ortega, B; Wei, J L; Tang, J; Capmany, J

2013-03-25

We provide an analytical study on the propagation effects of a directly modulated OOFDM signal through a dispersive fiber and subsequent photo-detection. The analysis includes the effects of the laser operation point and the interplay between chromatic dispersion and laser chirp. The final expression allows to understand the physics behind the transmission of a multi-carrier signal in the presence of residual frequency modulation and the description of the induced intermodulation distortion gives us a detailed insight into the diferent intermodulation products which impair the recovered signal at the receiver-end side. Numerical comparisons between transmission simulations results and those provided by evaluating the expression obtained are carried out for different laser operation points. Results obtained by changing the fiber length, laser parameters and using single mode fiber with negative and positive dispersion are calculated in order to demonstrate the validity and versatility of the theory provided in this paper. Therefore, a novel analytical formulation is presented as a versatile tool for the description and study of IM/DD OOFDM systems with variable design parameters.

Analytic result for the one-loop scalar pentagon integral with massless propagators

Energy Technology Data Exchange (ETDEWEB)

Kniehl, Bernd A.; Tarasov, Oleg V. [Hamburg Univ. (Germany). II. Inst. fuer Theoretische Physik

2010-01-15

The method of dimensional recurrences proposed by one of the authors (O. V.Tarasov, 1996) is applied to the evaluation of the pentagon-type scalar integral with on-shell external legs and massless internal lines. For the first time, an analytic result valid for arbitrary space-time dimension d and five arbitrary kinematic variables is presented. An explicit expression in terms of the Appell hypergeometric function F{sub 3} and the Gauss hypergeometric function {sub 2}F{sub 1}, both admitting one-fold integral representations, is given. In the case when one kinematic variable vanishes, the integral reduces to a combination of Gauss hypergeometric functions {sub 2}F{sub 1}. For the case when one scalar invariant is large compared to the others, the asymptotic values of the integral in terms of Gauss hypergeometric functions {sub 2}F{sub 1} are presented in d=2-2{epsilon}, 4-2{epsilon}, and 6-2{epsilon} dimensions. For multi-Regge kinematics, the asymptotic value of the integral in d=4-2{epsilon} dimensions is given in terms of the Appell function F{sub 3} and the Gauss hypergeometric function {sub 2}F{sub 1}. (orig.)

Analytical chemistry instrumentation

International Nuclear Information System (INIS)

Laing, W.R.

1986-01-01

In nine sections, 48 chapters cover 1) analytical chemistry and the environment 2) environmental radiochemistry 3) automated instrumentation 4) advances in analytical mass spectrometry 5) fourier transform spectroscopy 6) analytical chemistry of plutonium 7) nuclear analytical chemistry 8) chemometrics and 9) nuclear fuel technology

Tank 241-B-108, cores 172 and 173 analytical results for the final report

Energy Technology Data Exchange (ETDEWEB)

Nuzum, J.L., Fluoro Daniel Hanford

1997-03-04

The Data Summary Table (Table 3) included in this report compiles analytical results in compliance with all applicable DQOS. Liquid subsamples that were prepared for analysis by an acid adjustment of the direct subsample are indicated by a `D` in the A column in Table 3. Solid subsamples that were prepared for analysis by performing a fusion digest are indicated by an `F` in the A column in Table 3. Solid subsamples that were prepared for analysis by performing a water digest are indicated by a I.wl. or an `I` in the A column of Table 3. Due to poor precision and accuracy in original analysis of both Lower Half Segment 2 of Core 173 and the core composite of Core 173, fusion and water digests were performed for a second time. Precision and accuracy improved with the repreparation of Core 173 Composite. Analyses with the repreparation of Lower Half Segment 2 of Core 173 did not show improvement and suggest sample heterogeneity. Results from both preparations are included in Table 3.

Discussion of the Improved Methods for Analyzing a Cantilever Beam Carrying a Tip-Mass under Base Excitation

Directory of Open Access Journals (Sweden)

Wang Hongjin

2014-01-01

Full Text Available Two improved analytical methods of calculations for natural frequencies and mode shapes of a uniform cantilever beam carrying a tip-mass under base excitation are presented based on forced vibration theory and the method of separation of variables, respectively. The cantilever model is simplified in detail by replacing the tip-mass with an equivalent inertial force and inertial moment acting at the free end of the cantilever based on D’Alembert’s principle. The concentrated equivalent inertial force and inertial moment are further represented as distributed loads using Dirac Delta Function. In this case, some typical natural frequencies and mode shapes of the cantilever model are calculated by the improved and unimproved analytical methods. The comparing results show that, after improvement, these two methods are in extremely good agreement with each other even the offset distance between the gravity center of the tip-mass and the attachment point is large. As further verification, the transient and steady displacement responses of the cantilever system under a sine base excitation are presented in which two improved methods are separately utilized. Finally, an experimental cantilever system is fabricated and the theoretical displacement responses are validated by the experimental measurements successfully.

Paper-Based Analytical Device for Zinc Ion Quantification in Water Samples with Power-Free Analyte Concentration

Directory of Open Access Journals (Sweden)

Hiroko Kudo

2017-04-01

Full Text Available Insufficient sensitivity is a general issue of colorimetric paper-based analytical devices (PADs for trace analyte detection, such as metal ions, in environmental water. This paper demonstrates the colorimetric detection of zinc ions (Zn2+ on a paper-based analytical device with an integrated analyte concentration system. Concentration of Zn2+ ions from an enlarged sample volume (1 mL has been achieved with the aid of a colorimetric Zn2+ indicator (Zincon electrostatically immobilized onto a filter paper substrate in combination with highly water-absorbent materials. Analyte concentration as well as sample pretreatment, including pH adjustment and interferent masking, has been elaborated. The resulting device enables colorimetric quantification of Zn2+ in environmental water samples (tap water, river water from a single sample application. The achieved detection limit of 0.53 μM is a significant improvement over that of a commercial colorimetric Zn2+ test paper (9.7 μM, demonstrating the efficiency of the developed analyte concentration system not requiring any equipment.

Analytical cell decontamination and shielding window refurbishment. Final report, March 1984-March 1985

International Nuclear Information System (INIS)

Smokowski, R.T.

1985-01-01

This is a report on the decontamination and refurbishment of five inactive contaminated analytical cells and six zinc bromide filled shielding windows. The analytical cells became contaminated during the nuclear fuel reprocessing carried out by Nuclear Fuel Services from 1966 to 1972. The decontamination and decommissioning (D and D) work was performed in these cells to make them useful as laboratories in support of the West Valley Demonstration Project. To accomplish this objective, unnecessary equipment was removed from these cells. Necessary equipment and the interior of each cell were decontaminated and repaired. The shielding windows, essentially tanks holding zinc bromide, were drained and disassembled. The deteriorated, opaque zinc bromide was refined to optical clarity and returned to the tanks. All wastes generated in this operation were characterized and disposed of properly. All the decontamination and refurbishment was accomplished within 13 months. The Analytical Hot Cell has been turned over to Analytical Chemistry for the performance high-level waste (HLW) characterization analysis

The flexible application of carrying capacity in ecology

Directory of Open Access Journals (Sweden)

Eric J. Chapman

2018-01-01

Full Text Available Carrying capacity encompasses a broad collection of approaches used to better understand biotic interactions in ecosystems and is often applied with no explicit regard to its historical origin. In this paper, we reviewed the primary literature to examine how carrying capacity is applied in ecology. We focused our review on ecosystem studies—studies that frame their results at the ecosystem level—published after the 1950s and highlight emerging trends of this concept. We found that while carrying capacity offers some underlying commonalities, a wide range of definitions and approaches hinders a unified framework to better understand biotic ecosystem interactions. Not surprisingly, these studies most often use K—the number of individuals that the environment “can support” in a given area—to define carrying capacity, despite considerable ambiguity and uncertainty in this approach. Furthermore, the studies that we reviewed spanned several levels of ecological organization: molecules to communities and up to landscapes. To add further complexity, it is not clear whether carrying capacity was intended as a dynamic concept subject to temporal variability as it was often applied in the reviewed studies. We found that carrying capacity is most often applied to studies in conservation biology, rangeland and wildlife management, aquaculture, and fisheries biology. We explore ecosystem level responses to implications of “carrying capacity” overshoot and discuss proposed mechanisms that govern ecosystem carrying capacity. We discuss the usefulness of the concept and end with suggestions to improve carrying capacity's general application in ecosystem studies. Keywords: Carrying capacity, Conservation biology, Ecosystems, Ecosystem management, Natural resources

Let's Talk... Analytics

Science.gov (United States)

Oblinger, Diana G.

2012-01-01

Talk about analytics seems to be everywhere. Everyone is talking about analytics. Yet even with all the talk, many in higher education have questions about--and objections to--using analytics in colleges and universities. In this article, the author explores the use of analytics in, and all around, higher education. (Contains 1 note.)

SU-E-T-631: Preliminary Results for Analytical Investigation Into Effects of ArcCHECK Setup Errors

International Nuclear Information System (INIS)

Kar, S; Tien, C

2015-01-01

Purpose: As three-dimensional diode arrays increase in popularity for patient-specific quality assurance for intensity-modulated radiation therapy (IMRT), it is important to evaluate an array’s susceptibility to setup errors. The ArcCHECK phantom is set up by manually aligning its outside marks with the linear accelerator’s lasers and light-field. If done correctly, this aligns the ArcCHECK cylinder’s central axis (CAX) with the linear accelerator’s axis of rotation. However, this process is prone to error. This project has developed an analytical expression including a perturbation factor to quantify the effect of shifts. Methods: The ArcCHECK is set up by aligning its machine marks with either the sagittal room lasers or the light-field of the linear accelerator at gantry zero (IEC). ArcCHECK has sixty-six evenly-spaced SunPoint diodes aligned radially in a ring 14.4 cm from CAX. The detector response function (DRF) was measured and combined with inverse-square correction to develop an analytical expression for output. The output was calculated using shifts of 0 (perfect alignment), +/−1, +/−2 and +/−5 mm. The effect on a series of simple inputs was determined: unity, 1-D ramp, steps, and hat-function to represent uniform field, wedge, evenly-spaced modulation, and single sharp modulation, respectively. Results: Geometric expressions were developed with perturbation factor included to represent shifts. DRF was modeled using sixth-degree polynomials with correlation coefficient 0.9997. The output was calculated using simple inputs such as unity, 1-D ramp, steps, and hat-function, with perturbation factors of: 0, +/−1, +/−2 and +/−5 mm. Discrepancies have been observed, but large fluctuations have been somewhat mitigated by aliasing arising from discrete diode placement. Conclusion: An analytical expression with perturbation factors was developed to estimate the impact of setup errors on an ArcCHECK phantom. Presently, this has been applied to

Magnetoacoustic waves in current-carrying plasmas

International Nuclear Information System (INIS)

Brennan, M.H.

1980-04-01

The results of theoretical and experimental investigations of the characteristics of magnetoacoustic waves in non-uniform, current-carrying plasmas are reviewed. Dissipative MHD and collisionless theories are considered. Also discussed is the use of magnetoacoustic waves in plasma diagnostics and plasma heating

The use of analytical procedures in the internal audit of the restaurant business expenses

Directory of Open Access Journals (Sweden)

T.Yu. Kopotienko

2015-06-01

Full Text Available The important task of carrying out the internal audit of expenses is to get the sufficient and reliable audit evidence. This can be achieved by using the analytical procedures in the audit process. The identification of the analytical procedures with the financial analysis of the business activities prevents from the efficient usage of them in the internal audit of the restaurant business expenses. The knowledge of internal auditors about the instructional techniques of analytical procedures and their tasks, depending on the verification steps are insufficient. The purpose of the article is the developing the methods of the internal audit of the restaurant business expenses based on an integrated application of analytical procedures. The nature and purpose of analytical procedures have been investigated in the article. It have been identified the factors influencing on auditor’s decision about the choice of analytical procedures complex. It was recommended to identify among them the purpose of analytical procedures, the type and structure of the enterprise, the source of the available information, the existence of financial and non-financial information, reliability and comparability of the available information. It have been identified the tasks of analytical procedures, depending on the verification steps. It was offered the analytical procedures complex as a part of internal audit of the restaurant business expenses. This complex contains a list of the analytical procedures, instructional techniques of analysis that are used in the appropriate procedure and the brief overview of the content of procedure.

[Comparability study of analytical results between a group of clinical laboratories].

Science.gov (United States)

Alsius-Serra, A; Ballbé-Anglada, M; López-Yeste, M L; Buxeda-Figuerola, M; Guillén-Campuzano, E; Juan-Pereira, L; Colomé-Mallolas, C; Caballé-Martín, I

2015-01-01

To describe the study of the comparability of the measurements levels of biological tests processed in biochemistry in Catlab's 4 laboratories. Quality requirements, coefficients of variation and total error (CV% and TE %) were established. Controls were verified with the precision requirements (CV%) in each test and each individual laboratory analyser. Fresh serum samples were used for the comparability study. The differences were analysed using a Microsoft Access® application that produces modified Bland-Altman plots. The comparison of 32 biological parameters that are performed in more than one laboratory and/or analyser generated 306 Bland-Altman graphs. Of these, 101 (33.1%) fell within the accepted range of values based on biological variability, and 205 (66.9%) required revision. Data were re-analysed based on consensus minimum specifications for analytical quality (consensus of the Asociación Española de Farmacéuticos Analistas (AEFA), the Sociedad Española de Bioquímica Clínica y Patología Molecular (SEQC), the Asociación Española de Biopatología Médica (AEBM) and the Sociedad Española de Hematología y Hemoterapia (SEHH), October 2013). With the new specifications, 170 comparisons (56%) fitted the requirements and 136 (44%) required additional review. Taking into account the number of points that exceeded the requirement, random errors, range of results in which discrepancies were detected, and range of clinical decision, it was shown that the 44% that required review were acceptable, and the 32 tests were comparable in all laboratories and analysers. The analysis of the results showed that the consensus requirements of the 4 scientific societies were met. However, each laboratory should aim to meet stricter criteria for total error. Copyright © 2015 SECA. Published by Elsevier Espana. All rights reserved.

Analytics for Education

Science.gov (United States)

MacNeill, Sheila; Campbell, Lorna M.; Hawksey, Martin

2014-01-01

This article presents an overview of the development and use of analytics in the context of education. Using Buckingham Shum's three levels of analytics, the authors present a critical analysis of current developments in the domain of learning analytics, and contrast the potential value of analytics research and development with real world…

BLOOD SUBSTITUTES: EVOLUTION FROM NON-CARRYING TO OXYGEN AND GAS CARRYING FLUIDS

Science.gov (United States)

Cabrales, Pedro; Intaglietta, Marcos

2013-01-01

The development of oxygen (O2) carrying blood substitutes has evolved from the goal of replicating blood O2 transports properties to that of preserving microvascular and organ function, reducing the inherent or potential toxicity of the material used to carry O2, and treating pathologies initiated by anemia and hypoxia. Furthermore, the emphasis has shifted from blood replacement fluid to “O2 therapeutics” that restore tissue oxygenation to specific tissues regions. This review covers the different alternatives, potential and limitations of hemoglobin based O2 carriers (HBOCs) and perfluorocarbon based O2 carriers (PFCOCs), with emphasis on the physiological conditions disturbed in the situation that they will be used. It describes how concepts learned from plasma expanders without O2 carrying capacity can be applied to maintain O2 delivery and summarizes the microvascular responses due to HBOCs and PFCOCs. This review also presents alternative applications of HBOCs and PFCOCs namely: 1) How HBOC O2 affinity can be engineered to target O2 delivery to hypoxic tissues; and 2) How the high gas solubility of PFCOCs provides new opportunities for carrying, dissolving and delivering gases with biological activity. It is concluded that current blood substitutes development has amplified their applications horizon by devising therapeutic functions for oxygen carriers requiring limited O2 delivery capacity restoration. Conversely, full, blood-like O2 carrying capacity re-establishment awaits control of O2 carrier toxicity. PMID:23820271

DNA breathing dynamics: analytic results for distribution functions of relevant Brownian functionals.

Science.gov (United States)

Bandyopadhyay, Malay; Gupta, Shamik; Segal, Dvira

2011-03-01

We investigate DNA breathing dynamics by suggesting and examining several Brownian functionals associated with bubble lifetime and reactivity. Bubble dynamics is described as an overdamped random walk in the number of broken base pairs. The walk takes place on the Poland-Scheraga free-energy landscape. We suggest several probability distribution functions that characterize the breathing process, and adopt the recently studied backward Fokker-Planck method and the path decomposition method as elegant and flexible tools for deriving these distributions. In particular, for a bubble of an initial size x₀, we derive analytical expressions for (i) the distribution P(t{f}|x₀) of the first-passage time t{f}, characterizing the bubble lifetime, (ii) the distribution P(A|x₀) of the area A until the first-passage time, providing information about the effective reactivity of the bubble to processes within the DNA, (iii) the distribution P(M) of the maximum bubble size M attained before the first-passage time, and (iv) the joint probability distribution P(M,t{m}) of the maximum bubble size M and the time t{m} of its occurrence before the first-passage time. These distributions are analyzed in the limit of small and large bubble sizes. We supplement our analytical predictions with direct numericalsimulations of the related Langevin equation, and obtain a very good agreement in the appropriate limits. The nontrivial scaling behavior of the various quantities analyzed here can, in principle, be explored experimentally.

The Journal of Learning Analytics: Supporting and Promoting Learning Analytics Research

OpenAIRE

Siemens, George

2014-01-01

The paper gives a brief overview of the main activities for the development of the emerging field of learning analytics led by the Society for Learning Analytics Research (SoLAR). The place of the Journal of Learning Analytics is identified Analytics is the most significant new initiative of SoLAR. 

The "Journal of Learning Analytics": Supporting and Promoting Learning Analytics Research

Science.gov (United States)

Siemens, George

2014-01-01

The paper gives a brief overview of the main activities for the development of the emerging field of learning analytics led by the Society for Learning Analytics Research (SoLAR). The place of the "Journal of Learning Analytics" is identified. Analytics is the most significant new initiative of SoLAR.

Laser-induced Breakdown spectroscopy quantitative analysis method via adaptive analytical line selection and relevance vector machine regression model

International Nuclear Information System (INIS)

Yang, Jianhong; Yi, Cancan; Xu, Jinwu; Ma, Xianghong

2015-01-01

A new LIBS quantitative analysis method based on analytical line adaptive selection and Relevance Vector Machine (RVM) regression model is proposed. First, a scheme of adaptively selecting analytical line is put forward in order to overcome the drawback of high dependency on a priori knowledge. The candidate analytical lines are automatically selected based on the built-in characteristics of spectral lines, such as spectral intensity, wavelength and width at half height. The analytical lines which will be used as input variables of regression model are determined adaptively according to the samples for both training and testing. Second, an LIBS quantitative analysis method based on RVM is presented. The intensities of analytical lines and the elemental concentrations of certified standard samples are used to train the RVM regression model. The predicted elemental concentration analysis results will be given with a form of confidence interval of probabilistic distribution, which is helpful for evaluating the uncertainness contained in the measured spectra. Chromium concentration analysis experiments of 23 certified standard high-alloy steel samples have been carried out. The multiple correlation coefficient of the prediction was up to 98.85%, and the average relative error of the prediction was 4.01%. The experiment results showed that the proposed LIBS quantitative analysis method achieved better prediction accuracy and better modeling robustness compared with the methods based on partial least squares regression, artificial neural network and standard support vector machine. - Highlights: • Both training and testing samples are considered for analytical lines selection. • The analytical lines are auto-selected based on the built-in characteristics of spectral lines. • The new method can achieve better prediction accuracy and modeling robustness. • Model predictions are given with confidence interval of probabilistic distribution

An analytical laboratory to facilitate international safeguards

International Nuclear Information System (INIS)

Clark, B.E.; Muellner, P.; Deron, S.

1976-01-01

Member States which have concluded safeguards agreements accept safeguards on part or all of their nuclear facilities and nuclear materials. The Agreements enable the Agency to make inspections in order to verify the location, identity, quantity and composition of all safeguarded nuclear material. The independent analysis of samples of safeguards material is an essential part of the verification process. A new analytical laboratory has been made available to the Agency by the Austrian Government. This facility is staffed by the Agency with scientists and technicians from five Member States. Design criteria for the laboratory were defined by the Agency. Construction was carried out under the project management of the Oesterreichische Studiengesellschaft fuer Atomenergie Ges.m.b.H. Scientific equipment was procured by the Agency. Samples of feed and product material from the nuclear fuel cycle will constitute the main work load. Irradiated and unirradiated samples of uranium, plutonium and mixtures of both will be analysed for concentration and isotopic composition. Since highly diluted solutions of spent fuel will be the most active beta-gamma samples, shielded and remote manipulation facilities are not necessary. Ptentiometry, mass spectrometry and coulometry are the main techniques to be employed. Gravimetry, alpha and gamma spectrometry and emission spectroscopy will also be utilized as required. It is not intended that this laboratory, should carry the whole burden of the Agency's safeguards analytical work, but that it should function as a member of a network of international laboratories which has been set up by the Agency for this purpose. (author)

Analytical approximations for wide and narrow resonances

International Nuclear Information System (INIS)

Suster, Luis Carlos; Martinez, Aquilino Senra; Silva, Fernando Carvalho da

2005-01-01

This paper aims at developing analytical expressions for the adjoint neutron spectrum in the resonance energy region, taking into account both narrow and wide resonance approximations, in order to reduce the numerical computations involved. These analytical expressions, besides reducing computing time, are very simple from a mathematical point of view. The results obtained with this analytical formulation were compared to a reference solution obtained with a numerical method previously developed to solve the neutron balance adjoint equations. Narrow and wide resonances of U 238 were treated and the analytical procedure gave satisfactory results as compared with the reference solution, for the resonance energy range. The adjoint neutron spectrum is useful to determine the neutron resonance absorption, so that multigroup adjoint cross sections used by the adjoint diffusion equation can be obtained. (author)

Analytical approximations for wide and narrow resonances

Energy Technology Data Exchange (ETDEWEB)

Suster, Luis Carlos; Martinez, Aquilino Senra; Silva, Fernando Carvalho da [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Engenharia Nuclear]. E-mail: aquilino@lmp.ufrj.br

2005-07-01

This paper aims at developing analytical expressions for the adjoint neutron spectrum in the resonance energy region, taking into account both narrow and wide resonance approximations, in order to reduce the numerical computations involved. These analytical expressions, besides reducing computing time, are very simple from a mathematical point of view. The results obtained with this analytical formulation were compared to a reference solution obtained with a numerical method previously developed to solve the neutron balance adjoint equations. Narrow and wide resonances of U{sup 238} were treated and the analytical procedure gave satisfactory results as compared with the reference solution, for the resonance energy range. The adjoint neutron spectrum is useful to determine the neutron resonance absorption, so that multigroup adjoint cross sections used by the adjoint diffusion equation can be obtained. (author)

Results from the geological surveys carried out in the Bure laboratory's drifts

International Nuclear Information System (INIS)

Rebours, Herve; Righini, Celine

2010-01-01

Document available in extended abstract form only. After the government's authorization to build and operate an underground laboratory, Andra started the investigation works in November 99 on the Meuse/Haute-Marne URL site. The Meuse/Haute-Marne URL is located at the border of the Champagne-Ardenne and Lorraine regions, on the township of Bure in the Callovo-Oxfordian clay-rich rock. At this place, the layer is about 135 m-thick and lies at a depth of 417 m to 552 m. The construction of the underground installations started in August 2000 with the sinking of the main shaft and the first phase of diggings was completed on the 27 April 2006 when it linked up with the south drift of the laboratory. The laboratory consists in two vertical shafts crossing the 505-m thick sedimentary cover and two levels of experimental drifts dug in Callovo-Oxfordian formation. The first experimental drift dug at -445 m with a drill-and-blast method with steps of 2.4 m. The technical and experimental drifts at the main level (-490 m of depth) were dug with a hydraulic stone crusher. The aims of the geological surveys carried out during the drifts digging are to observe the lateral variation of the lithology, if there is one, to confirm the absence of fault and the geometry of the argillites formation. These works should also allow to characterize the natural or inducted fracturing (EDZ - Excavation Damaged Zone) induced by the digging by a sedimentary and structural follow-up. The EDZ characterization has been established from the geological survey of the drift face and sidewalls carried out from 1 to 5 meters in the drifts, and completed by the structural analysis of the cores of the boreholes drilled for the experimentations' equipments. After the safe keeping of the front, the geological team goes down to carry out the survey which consists in a lithologic and sedimentary mapping, a structural survey for the understanding of joints distribution and EDZ characterization, and

Analytical results for a stochastic model of gene expression with arbitrary partitioning of proteins

Science.gov (United States)

Tschirhart, Hugo; Platini, Thierry

2018-05-01

In biophysics, the search for analytical solutions of stochastic models of cellular processes is often a challenging task. In recent work on models of gene expression, it was shown that a mapping based on partitioning of Poisson arrivals (PPA-mapping) can lead to exact solutions for previously unsolved problems. While the approach can be used in general when the model involves Poisson processes corresponding to creation or degradation, current applications of the method and new results derived using it have been limited to date. In this paper, we present the exact solution of a variation of the two-stage model of gene expression (with time dependent transition rates) describing the arbitrary partitioning of proteins. The methodology proposed makes full use of the PPA-mapping by transforming the original problem into a new process describing the evolution of three biological switches. Based on a succession of transformations, the method leads to a hierarchy of reduced models. We give an integral expression of the time dependent generating function as well as explicit results for the mean, variance, and correlation function. Finally, we discuss how results for time dependent parameters can be extended to the three-stage model and used to make inferences about models with parameter fluctuations induced by hidden stochastic variables.

Experimental and analytical studies on the vibration serviceability of long-span prestressed concrete floor

Science.gov (United States)

Cao, Liang; Liu, Jiepeng; Li, Jiang; Zhang, Ruizhi

2018-04-01

An extensive experimental and theoretical research study was undertaken to study the vibration serviceability of a long-span prestressed concrete floor system to be used in the lounge of a major airport. Specifically, jumping impact tests were carried out to obtain the floor's modal parameters, followed by an analysis of the distribution of peak accelerations. Running tests were also performed to capture the acceleration responses. The prestressed concrete floor was found to have a low fundamental natural frequency (≈ 8.86 Hz) corresponding to the average modal damping ratio of ≈ 2.17%. A coefficients β rp is proposed for convenient calculation of the maximum root-mean-square acceleration for running. In the theoretical analysis, the prestressed concrete floor under running excitation is treated as a two-span continuous anisotropic rectangular plate with simply-supported edges. The calculated analytical results (natural frequencies and root-mean-square acceleration) agree well with the experimental ones. The analytical approach is thus validated.

Nanometrology, Standardization and Regulation of Nanomaterials in Brazil: A Proposal for an Analytical-Prospective Model

Directory of Open Access Journals (Sweden)

Ana Rusmerg Giménez Ledesma

2013-05-01

Full Text Available The main objective of this paper is to propose an analytical-prospective model as a tool to support decision-making processes concerning metrology, standardization and regulation of nanomaterials in Brazil, based on international references and ongoing initiatives in the world. In the context of nanotechnology development in Brazil, the motivation for carrying out this research was to identify potential benefits of metrology, standardization and regulation of nanomaterials production, from the perspective of future adoption of the model by the main stakeholders of development of these areas in Brazil. The main results can be summarized as follows: (i an overview of international studies on metrology, standardization and regulation of nanomaterials, and nanoparticles, in special; (ii the analytical-prospective model; and (iii the survey questionnaire and the roadmapping tool for metrology, standardization and regulation of nanomaterials in Brazil, based on international references and ongoing initiatives in the world.

Tank 241-TX-104, cores 230 and 231 analytical results for the final report

International Nuclear Information System (INIS)

Diaz, L.A.

1998-01-01

This document is the analytical laboratory report for tank 241-TX-104 push mode core segments collected between February 18, 1998 and February 23, 1998. The segments were subsampled and analyzed in accordance with the Tank 241-TX-104 Push Mode Core Sampling and Analysis Plan (TSAP) (McCain, 1997), the Data Quality Objective to Support Resolution of the Organic Complexant Safety Issue (Organic DQO) (Turner, et al., 1995) and the Safety Screening Data Quality Objective (DQO) (Dukelow, et.al., 1995). The analytical results are included in the data summary table. None of the samples submitted for Differential Scanning Calorimetry (DSC) and Total Alpha Activity (AT) exceeded notification limits as stated in the TSAP. The statistical results of the 95% confidence interval on the mean calculations are provided by the Tank Waste Remediation Systems Technical Basis Group in accordance with the Memorandum of Understanding (Schreiber, 1997) and are not considered in this report. Appearance and Sample Handling Attachment 1 is a cross reference to relate the tank farm identification numbers to the 222-S Laboratory LabCore/LIMS sample numbers. The subsamples generated in the laboratory for analyses are identified in these diagrams with their sources shown. Core 230: Three push mode core segments were removed from tank 241-TX-104 riser 9A on February 18, 1998. Segments were received by the 222-S Laboratory on February 19, 1998. Two segments were expected for this core. However, due to poor sample recovery, an additional segment was taken and identified as 2A. Core 231: Four push mode core segments were removed from tank 241-TX-104 riser 13A between February 19, 1998 and February 23, 1998. Segments were received by the 222-S Laboratory on February 24, 1998. Two segments were expected for this core. However, due to poor sample recovery, additional segments were taken and identified as 2A and 2B. The TSAP states the core samples should be transported to the laboratory within three

Analytic neutrality, anonymity, abstinence, and elective self-disclosure.

Science.gov (United States)

Shill, Merton A

2004-01-01

Recent contributions to the psychoanalytic literature propose new ways of understanding analytic neutrality, anonymity, abstinence, and self-disclosure. They advocate elective self-disclosure by the analyst as an antidote to the allegedly game-playing quality of transference and resistance analysis. The analytic relationship, they assert, becomes unreal when attempts are made to observe the principles of neutrality and abstinence. Both are seen as ill-conceived because of the irreducible subjectivity and unwarranted authority of the analyst. These relational and interactional views are criticized because (1) they ignore the fact that transference and resistance analysis have from Freud onward been accepted as minimal criteria qualifying a clinical process as psychoanalytic; (2) elective self-disclosure carries metapsychological implications dismissing not only Freud's theory of motivation but motivation as a basic feature of human personality; (3) they do not recognize interpersonal relations as mental events and so do not consider the ego's ability to create intrapsychic representations of object relations; (4) elective self-disclosures within the empathic parameters of the analytic situation are themselves unreal compared to the reality of the patient's experience with other objects. Abstinence and neutrality as ideals facilitate maintenance of an internal holding environment or container for the analyst's countertransference.

Discordant Analytical Results Caused by Biotin Interference on Diagnostic Immunoassays in a Pediatric Hospital.

Science.gov (United States)

Ali, Mahesheema; Rajapakshe, Deepthi; Cao, Liyun; Devaraj, Sridevi

2017-09-01

Recent studies have reported that biotin interferes with certain immunoassays. In this study, we evaluated the analytical interference of biotin on immunoassays that use streptavidin-biotin in our pediatric hospital. We tested the effect of different concentrations of biotin (1.5-200 ng/ml) on TSH, Prolactin, Ferritin, CK-MB, β-hCG, Troponin I, LH, FSH, Cortisol, Anti-HAV antibody (IgG and IgM), assays on Ortho Clinical Diagnostic Vitros 5600 Analyzer. Biotin (up to 200 ng/mL) did not significantly affect Troponin I and HAV assays. Biotin (up to 12.5 ng/ml) resulted in biotin >6.25 ng/mL significantly affected TSH (>20% bias) assay. Prolactin was significantly affected even at low levels (Biotin 1.5 ng/mL). Thus, we recommend educating physicians about biotin interference in common immunoassays and adding an electronic disclaimer. © 2017 by the Association of Clinical Scientists, Inc.

HTS axial flux induction motor with analytic and FEA modeling

Energy Technology Data Exchange (ETDEWEB)

Li, S., E-mail: alexlee.zn@gmail.com; Fan, Y.; Fang, J.; Qin, W.; Lv, G.; Li, J.H.

2013-11-15

Highlights: •A high temperature superconductor axial flux induction motor and a novel maglev scheme are presented. •Analytic method and finite element method have been adopted to model the motor and to calculate the force. •Magnetic field distribution in HTS coil is calculated by analytic method. •An effective method to improve the critical current of HTS coil is presented. •AC losses of HTS coils in the HTS axial flux induction motor are estimated and tested. -- Abstract: This paper presents a high-temperature superconductor (HTS) axial-flux induction motor, which can output levitation force and torque simultaneously. In order to analyze the character of the force, analytic method and finite element method are adopted to model the motor. To make sure the HTS can carry sufficiently large current and work well, the magnetic field distribution in HTS coil is calculated. An effective method to improve the critical current of HTS coil is presented. Then, AC losses in HTS windings in the motor are estimated and tested.

HTS axial flux induction motor with analytic and FEA modeling

International Nuclear Information System (INIS)

Li, S.; Fan, Y.; Fang, J.; Qin, W.; Lv, G.; Li, J.H.

2013-01-01

Highlights: •A high temperature superconductor axial flux induction motor and a novel maglev scheme are presented. •Analytic method and finite element method have been adopted to model the motor and to calculate the force. •Magnetic field distribution in HTS coil is calculated by analytic method. •An effective method to improve the critical current of HTS coil is presented. •AC losses of HTS coils in the HTS axial flux induction motor are estimated and tested. -- Abstract: This paper presents a high-temperature superconductor (HTS) axial-flux induction motor, which can output levitation force and torque simultaneously. In order to analyze the character of the force, analytic method and finite element method are adopted to model the motor. To make sure the HTS can carry sufficiently large current and work well, the magnetic field distribution in HTS coil is calculated. An effective method to improve the critical current of HTS coil is presented. Then, AC losses in HTS windings in the motor are estimated and tested

One-loop Higgs plus four gluon amplitudes. Full analytic results

International Nuclear Information System (INIS)

Badger, Simon; Nigel Glover, E.W.; Williams, Ciaran; Mastrolia, Pierpaolo

2009-10-01

We consider one-loop amplitudes of a Higgs boson coupled to gluons in the limit of a large top quark mass. We treat the Higgs as the real part of a complex field φ that couples to the self-dual field strengths and compute the one-loop corrections to the φ-NMHV amplitude, which contains one gluon of positive helicity whilst the remaining three have negative helicity. We use four-dimensional unitarity to construct the cut-containing contributions and a hybrid of Feynman diagram and recursive based techniques to determine the rational piece. Knowledge of the φ-NMHV contribution completes the analytic calculation of the Higgs plus four gluon amplitude. For completeness we also include expressions for the remaining helicity configurations which have been calculated elsewhere. These amplitudes are relevant for Higgs plus jet production via gluon fusion in the limit where the top quark is large compared to all other scales in the problem. (orig.)

O papel dos programas interlaboratoriais para a qualidade dos resultados analíticos Interlaboratorial programs for improving the quality of analytical results

Directory of Open Access Journals (Sweden)

Queenie Siu Hang Chui

2004-12-01

Full Text Available Interlaboratorial programs are conducted for a number of purposes: to identify problems related to the calibration of instruments, to assess the degree of equivalence of analytical results among several laboratories, to attribute quantity values and its uncertainties in the development of a certified reference material and to verify the performance of laboratories as in proficiency testing, a key quality assurance technique, which is sometimes used in conjunction with accreditation. Several statistics tools are employed to assess the analytical results of laboratories participating in an intercomparison program. Among them are the z-score technique, the elypse of confidence and the Grubbs and Cochran test. This work presents the experience in coordinating an intercomparison exercise in order to determine Ca, Al, Fe, Ti and Mn, as impurities in samples of silicon metal of chemical grade prepared as a candidate for reference material.

Influence of Hemolysis on Analytic Results of Nuclear Magnetic Resonance-based Metabonomics

Directory of Open Access Journals (Sweden)

Qiao LIU

2015-09-01

Full Text Available Objective: To explore the changes of small molecular metabolites and their content in plasma samples due to hemolysis so as to analyze the influence of hemolysis of plasma samples on metabonomic study. Methods: Healthy adult males undergoing physical examination without drug administration history in recent period were selected to collect 10 hemolytic plasma samples and 10 hemolysis-free samples from them. Spectrograms of hydrogen nuclear magnetic resonance (1H-NMR were collected and Carr-Purcell-Meiboom-Gill (CPMG pulse sequence was used to inhibit the production of broad peak by protein and lipid, and SIMCA-P+12.0 software was applied to conduct mode recognition and Pearson correlation analysis.Results: CPMG-1H NMR plasma metabolism spectrums showed that compared with hemolysis-free samples, hemolytic samples were evidently higher in the contents of acetate, acetone and pyruvic acid, but markedly lower in that of glucose. In addition, the chemical shift of glycine-CH2 in hemolysis group moved to the lower field. Orthogonal partial least-square discriminant analysis (OPLS-DA was further applied to initiate mode recognition analysis and the results demonstrated that hemolysis group was prominently higher in the contents of metabolites, such as leucine, valine, lysine, acetate, proline, acetone, pyruvic acid, creatine, creatinine, glycine, glycerol, serine and lactic acid, but obviously lower in the contents of isoleucine and glucose than hemolysis-free group. Pearson correlation analysis indicated that in hemolytic samples, the contents of eucine, valine, lysine, proline, N-acetyl-glycoprotein, creatine, creatinine, glycerol and serine were higher but that of isoleucine was lower.Conclusion: Hemolysis can lead to the changes of multiple metabolite content and influence the analytic results of metabonomics, so in practical operation, hemolytic samples should be excluded from the study.

An analytical erosion model for divertor plates and limiter experiments in CHS

International Nuclear Information System (INIS)

Sagara, A.; Noda, N.; Akiyama, R.; Arimoto, H.; Idei, H.; Iguchi, H.; Kaneko, O.; Kohmoto, T.; Kubo, S.; Matsuoka, K.; Morita, S.; Motojima, O.; Nishimura, K.; Okamura, S.; Takahasi, C.; Takita, Y.; Yamada, I.; Matsunami, N.; Rice, J.; Yamada, H.; Shoji, T.; Ueda, M.

1992-01-01

A self-consistent analytical solution for net erosion of a divertor plate which is set perpendicular to magnetic field lines is presented. The primary flux profile of hydrogen and impurities except redepositing particles is externally given as well as the return ratio of sputtered atoms to the plate. In the direction along the divertor trace, all conditions are uniform. The ionization mean free path is assumed constant to simplify equations. The analytical solution is compared with net erosion experiments carried out in compact helical system (CHS) by exposing a graphite target to a neutral beam heated plasma column introduced perpendicularly to the target along the magnetic field lines through a 2 cm slit opend on a graphite limiter. After exposure to 98 discharges, the target surface is analyzed with Rutherford backscattering method. Deposition profiles of Ti and O impurities are very well explained with the analytical predictions. (orig.)

Analytical solutions to the free vibration of a double-walled carbon nanotube carrying a bacterium at its tip

Energy Technology Data Exchange (ETDEWEB)

Storch, Joel A. [Department of Mechanical Engineering, California State University, Northridge, CA 91330-8348 (United States); Elishakoff, Isaac [Department of Ocean and Mechanical Engineering, Florida Atlantic University, Boca Raton, FL 33431-0991 (United States)

2013-11-07

We calculate the natural frequencies and mode shapes of a cantilevered double-walled carbon nanotube carrying a rigid body—representative of a bacterium or virus—at the tip of the outer nanotube. By idealizing the nanotubes as Bernoulli-Euler beams, we are able to obtain exact expressions for both the mode shapes and characteristic frequency equation. Separate analyses are performed for the special case of a concentrated tip mass and the more complicated situation where the tip body also exhibits inertia and mass center offset from the beam tip.

Optical Carry Adder.

Science.gov (United States)

1987-03-01

AOM’s) with the deflected beam as the modulator "on" state. These AOM’s ( TeO2 crystals, manufactured by Newport E.O. Systems) have high deflection...caused by the slow acoustic propagation (4.2 - 105 cm/s for TeO2 ), but this delay can be minimized by placing the laser beam close to the acoustic...dependent jitter in the optical carry to below 1 ns, the total carry path must be less than 30 cm long (or 20 cm in glass , 14 cm in LiNbO 3). Thus, a 32

Influence of centrifugation conditions on the results of 77 routine clinical chemistry analytes using standard vacuum blood collection tubes and the new BD-Barricor tubes.

Science.gov (United States)

Cadamuro, Janne; Mrazek, Cornelia; Leichtle, Alexander B; Kipman, Ulrike; Felder, Thomas K; Wiedemann, Helmut; Oberkofler, Hannes; Fiedler, Georg M; Haschke-Becher, Elisabeth

2018-02-15

Although centrifugation is performed in almost every blood sample, recommendations on duration and g-force are heterogeneous and mostly based on expert opinions. In order to unify this step in a fully automated laboratory, we aimed to evaluate different centrifugation settings and their influence on the results of routine clinical chemistry analytes. We collected blood from 41 healthy volunteers into BD Vacutainer PST II-heparin-gel- (LiHepGel), BD Vacutainer SST II-serum-, and BD Vacutainer Barricor heparin-tubes with a mechanical separator (LiHepBar). Tubes were centrifuged at 2000xg for 10 minutes and 3000xg for 7 and 5 minutes, respectively. Subsequently 60 and 21 clinical chemistry analytes were measured in plasma and serum samples, respectively, using a Roche COBAS instrument. High sensitive Troponin T, pregnancy-associated plasma protein A, ß human chorionic gonadotropin and rheumatoid factor had to be excluded from statistical evaluation as many of the respective results were below the measuring range. Except of free haemoglobin (fHb) measurements, no analyte result was altered by the use of shorter centrifugation times at higher g-forces. Comparing LiHepBar to LiHepGel tubes at different centrifugation setting, we found higher lactate-dehydrogenase (LD) (P = 0.003 to centrifuged at higher speed (3000xg) for a shorter amount of time (5 minutes) without alteration of the analytes tested in this study. When using LiHepBar tubes for blood collection, a separate LD reference value might be needed.

Organization and carrying out the triathlon competitions in Ukraine

Directory of Open Access Journals (Sweden)

Volodymyr Vodlozerov

2016-02-01

Full Text Available Purpose: the aim is analyzing of system of organization and carrying out the triathlon competitions in Ukraine in accordance with rules of triathlon international federation. Material & Methods: comparative analysis of process of organization and carrying out the triathlon competitions in the world and Ukraine was carried out on basis of specialist literature studying, normative base of sports organizations (triathlon federation. Results: inconsistencies were identified in competitions carried out in cold season, particularity of triathlon that intends overcoming the combined distance without time durations between stages. Conclusions: recommendation in eliminate inconsistencies that affect to performance of triathlon competitions in Ukraine was suggested.

Decision Making in Reference to Model of Marketing Predictive Analytics – Theory and Practice

Directory of Open Access Journals (Sweden)

Piotr Tarka

2014-03-01

Full Text Available Purpose: The objective of this paper is to describe concepts and assumptions of predictive marketing analytics in reference to decision making. In particular, we highlight issues pertaining to the importance of data and the modern approach to data analysis and processing with the purpose of solving real marketing problems that companies encounter in business. Methodology: In this paper authors provide two study cases showing how, and to what extent predictive marketing analytics work can be useful in practice e.g., investigation of the marketing environment. The two cases are based on organizations operating mainly on Web site domain. The fi rst part of this article, begins a discussion with the explanation of a general idea of predictive marketing analytics. The second part runs through opportunities it creates for companies in the process of building strong competitive advantage in the market. The paper article ends with a brief comparison of predictive analytics versus traditional marketing-mix analysis. Findings: Analytics play an extremely important role in the current process of business management based on planning, organizing, implementing and controlling marketing activities. Predictive analytics provides the actual and current picture of the external environment. They also explain what problems are faced with the company in business activities. Analytics tailor marketing solutions to the right time and place at minimum costs. In fact they control the effi ciency and simultaneously increases the effectiveness of the firm. Practical implications: Based on the study cases comparing two enterprises carrying business activities in different areas, one can say that predictive analytics has far more been embraces extensively than classical marketing-mix analyses. The predictive approach yields greater speed of data collection and analysis, stronger predictive accuracy, better obtained competitor data, and more transparent models where one can

Gun Carrying by High School Students in Boston, MA: Does Overestimation of Peer Gun Carrying Matter?

Science.gov (United States)

Hemenway, David; Vriniotis, Mary; Johnson, Renee M.; Miller, Matthew; Azrael, Deborah

2011-01-01

This paper investigates: (1) whether high school students overestimate gun carrying by their peers, and (2) whether those students who overestimate peer gun carrying are more likely to carry firearms. Data come from a randomly sampled survey conducted in 2008 of over 1700 high school students in Boston, MA. Over 5% of students reported carrying a…

Analyticity and the Global Information Field

Directory of Open Access Journals (Sweden)

Evgeni A. Solov'ev

2015-03-01

Full Text Available The relation between analyticity in mathematics and the concept of a global information field in physics is reviewed. Mathematics is complete in the complex plane only. In the complex plane, a very powerful tool appears—analyticity. According to this property, if an analytic function is known on the countable set of points having an accumulation point, then it is known everywhere. This mysterious property has profound consequences in quantum physics. Analyticity allows one to obtain asymptotic (approximate results in terms of some singular points in the complex plane which accumulate all necessary data on a given process. As an example, slow atomic collisions are presented, where the cross-sections of inelastic transitions are determined by branch-points of the adiabatic energy surface at a complex internuclear distance. Common aspects of the non-local nature of analyticity and a recently introduced interpretation of classical electrodynamics and quantum physics as theories of a global information field are discussed.

IBM Watson Analytics: Automating Visualization, Descriptive, and Predictive Statistics.

Science.gov (United States)

Hoyt, Robert Eugene; Snider, Dallas; Thompson, Carla; Mantravadi, Sarita

2016-10-11

We live in an era of explosive data generation that will continue to grow and involve all industries. One of the results of this explosion is the need for newer and more efficient data analytics procedures. Traditionally, data analytics required a substantial background in statistics and computer science. In 2015, International Business Machines Corporation (IBM) released the IBM Watson Analytics (IBMWA) software that delivered advanced statistical procedures based on the Statistical Package for the Social Sciences (SPSS). The latest entry of Watson Analytics into the field of analytical software products provides users with enhanced functions that are not available in many existing programs. For example, Watson Analytics automatically analyzes datasets, examines data quality, and determines the optimal statistical approach. Users can request exploratory, predictive, and visual analytics. Using natural language processing (NLP), users are able to submit additional questions for analyses in a quick response format. This analytical package is available free to academic institutions (faculty and students) that plan to use the tools for noncommercial purposes. To report the features of IBMWA and discuss how this software subjectively and objectively compares to other data mining programs. The salient features of the IBMWA program were examined and compared with other common analytical platforms, using validated health datasets. Using a validated dataset, IBMWA delivered similar predictions compared with several commercial and open source data mining software applications. The visual analytics generated by IBMWA were similar to results from programs such as Microsoft Excel and Tableau Software. In addition, assistance with data preprocessing and data exploration was an inherent component of the IBMWA application. Sensitivity and specificity were not included in the IBMWA predictive analytics results, nor were odds ratios, confidence intervals, or a confusion matrix

3D Analytical Calculation of the Interactions between Permanent Magnets

OpenAIRE

Allag , Hicham; Yonnet , Jean-Paul

2008-01-01

International audience; Up to now, the analytical calculation has been made only when the magnets own parallel magnetization directions. We have succeeded in two new results of first importance for the analytical calculation: the torque between two magnets, and the force components and torque when the magnetization directions are perpendicular. The last result allows the analytical calculation of the interactions when the magnetizations are in all the directions. The 3D analytical expressions...

Approximate analytical modeling of leptospirosis infection

Science.gov (United States)

Ismail, Nur Atikah; Azmi, Amirah; Yusof, Fauzi Mohamed; Ismail, Ahmad Izani

2017-11-01

Leptospirosis is an infectious disease carried by rodents which can cause death in humans. The disease spreads directly through contact with feces, urine or through bites of infected rodents and indirectly via water contaminated with urine and droppings from them. Significant increase in the number of leptospirosis cases in Malaysia caused by the recent severe floods were recorded during heavy rainfall season. Therefore, to understand the dynamics of leptospirosis infection, a mathematical model based on fractional differential equations have been developed and analyzed. In this paper an approximate analytical method, the multi-step Laplace Adomian decomposition method, has been used to conduct numerical simulations so as to gain insight on the spread of leptospirosis infection.

Installation for analytic chemistry under irradiation

International Nuclear Information System (INIS)

Fradin, J.; Azoeuf, P.; Guillon, A.

1966-01-01

An installation has been set up for carrying out manipulations and chemical analyses on radioactive products. It is completely remote-controlled and is of linear shape, 15 metres long; it is made up of three zones: - an active zone containing the apparatus, - a rear zone giving access to the active zone, - a forward zone independent of the two others and completely protected from which the remote-control of the apparatus is effected. The whole assembly has been designed so that each apparatus corresponding to an analytical technique is set up in a sealed enclosure. The sealed enclosures are interconnected by a conveyor. After three years operation, a critical review is now made of the installation. (authors) [fr

Understanding the Digital Marketing Environment with KPIs and Web Analytics

Directory of Open Access Journals (Sweden)

José Ramón Saura

2017-11-01

Full Text Available In the practice of Digital Marketing (DM, Web Analytics (WA and Key Performance Indicators (KPIs can and should play an important role in marketing strategy formulation. It is the aim of this article to survey the various DM metrics to determine and address the following question: What are the most relevant metrics and KPIs that companies need to understand and manage in order to increase the effectiveness of their DM strategies? Therefore, to achieve these objectives, a Systematic Literature Review has been carried out based on two main themes (i Digital Marketing and (ii Web Analytics. The search terms consulted in the databases have been (i DM and (ii WA obtaining a result total of n = 378 investigations. The databases that have been consulted for the extraction of data were Scopus, PubMed, PsyINFO, ScienceDirect and Web of Science. In this study, we define and identify the main KPIs in measuring why, how and for what purpose users interact with web pages and ads. The main contribution of the study is to lay out and clarify quantitative and qualitative KPIs and indicators for DM performance in order to achieve a consensus on the use and measurement of these indicators.

Comparison of experimental target currents with analytical model results for plasma immersion ion implantation

International Nuclear Information System (INIS)

En, W.G.; Lieberman, M.A.; Cheung, N.W.

1995-01-01

Ion implantation is a standard fabrication technique used in semiconductor manufacturing. Implantation has also been used to modify the surface properties of materials to improve their resistance to wear, corrosion and fatigue. However, conventional ion implanters require complex optics to scan a narrow ion beam across the target to achieve implantation uniformity. An alternative implantation technique, called Plasma Immersion Ion Implantation (PIII), immerses the target into a plasma. The ions are extracted from the plasma directly and accelerated by applying negative high-voltage pulses to the target. An analytical model of the voltage and current characteristics of a remote plasma is presented. The model simulates the ion, electron and secondary electron currents induced before, during and after a high voltage negative pulse is applied to a target immersed in a plasma. The model also includes analytical relations that describe the sheath expansion and collapse due to negative high voltage pulses. The sheath collapse is found to be important for high repetition rate pulses. Good correlation is shown between the model and experiment for a wide variety of voltage pulses and plasma conditions

Thrombin-Accelerated Quick Clotting Serum Tubes: An Evaluation with 22 Common Biochemical Analytes

Directory of Open Access Journals (Sweden)

Wai-Yoong Ng

2013-01-01

Full Text Available Clot activator serum tubes have significantly improved turnaround times for result reporting compared to plain tubes. With increasing workload and service performance expectations confronting clinical laboratories with high-volume testing and with particular emphasis on critical analytes, attention has focussed on preanalytical variables that can be improved. We carried out a field study on the test performance of BD vacutainer rapid serum tubes (RSTs compared to current institutional issued BD vacutainer serum separator tubes (SSTs in its test result comparability, clotting time, and stability on serum storage. Data from the study population (n=160 of patients attending outpatient clinics and healthy subjects showed that results for renal, liver, lipids, cardiac, thyroid, and prostate biochemical markers were comparable between RSTs and SSTs. Clotting times of the RSTs were verified to be quick with a median time of 2.05 min. Analyte stability on serum storage at 4°C showed no statistically significant deterioration except for bicarbonate, electrolytes, and albumin over a period of 4 days. In conclusion, RSTs offered savings in the time required for the clotting process of serum specimens. This should translate to further trimming of the whole process from blood collection to result reporting without too much sacrifice on test accuracy and performance compared to the current widely used SSTs in most clinical laboratories.

Analytic trigonometry

CERN Document Server

Bruce, William J; Maxwell, E A; Sneddon, I N

1963-01-01

Analytic Trigonometry details the fundamental concepts and underlying principle of analytic geometry. The title aims to address the shortcomings in the instruction of trigonometry by considering basic theories of learning and pedagogy. The text first covers the essential elements from elementary algebra, plane geometry, and analytic geometry. Next, the selection tackles the trigonometric functions of angles in general, basic identities, and solutions of equations. The text also deals with the trigonometric functions of real numbers. The fifth chapter details the inverse trigonometric functions

Experimental Observation and Analytical Modeling of Melting and Solidification during Aluminum Alloy Repair by Turbulence Flow Casting

Directory of Open Access Journals (Sweden)

Muki Satya Permana

2015-10-01

Full Text Available This paper presents an overview on the state of the art of applicable casting technology for applications in the field of repairing aluminum alloy components. Repair process on the Al alloy sample using similar metal has been carried out to investigate the micro-structural effect. Joining occurs as a result of convection heat transfer of molten flow into the sand mold which melts the existing base metal inside the mold and subsequent solidification. The analytical model has been developed to describe aluminum alloy component repair by turbulence flow casting. The model is designed based on heat transfer principle that can handle the phenomena of heat flow. The experimental result and analytical model analyses pointed out that joint quality are greatly affected by parameters of preheating temperature and duration of molten metal flow in the mold. To obtain a desired metallurgical sound at the joint, the optimum temperature and time were adjusted in order to obtain a similarity of microstructure between filler and base metal. This model is aimed to predict the use of the process parameter ranges in order to have the optimum parameters when it is applied to the experiment. The fixed parameters are flow rate, sand ratio, and pouring temperature. The process parameters are preheating temperature and pouring time. It is concluded that analytical modeling has good agreement with the experimental result.

Principal results of 'DEWAM' project implementation, Russian Federation

International Nuclear Information System (INIS)

Nechaev, A.F.

2002-01-01

This overview summarizes the key results of the four-year project 'Decontamination and Waste Management in the Course of Research Reactors Decommissioning' carried out within the framework of the IAEA's CRP 'Decommissioning Techniques for Research Reactors'. The project included two principal components: (1) info-analytical studies and development of a database system, and (2) research and development in the areas of decontamination and waste management technologies applicable to decommissioning. Details of the work are expounded in 29 publications and annual Progress Reports; the results of the study are used in corresponding university courses; and innovative technologies for radwaste processing and environmental restoration are planned to be introduced into practice. (author)

Atom-number squeezing and bipartite entanglement of two-component Bose-Einstein condensates: analytical results

Energy Technology Data Exchange (ETDEWEB)

Jin, G R; Wang, X W; Li, D; Lu, Y W, E-mail: grjin@bjtu.edu.c [Department of Physics, Beijing Jiaotong University, Beijing 100044 (China)

2010-02-28

We investigate spin dynamics of a two-component Bose-Einstein condensate with weak Josephson coupling. Analytical expressions of atom-number squeezing and bipartite entanglement are presented for atom-atom repulsive interactions. For attractive interactions, there is no number squeezing; however, the squeezing parameter is still useful to recognize the appearance of Schroedinger's cat state.

Pre-analytical and analytical variation of drug determination in segmented hair using ultra-performance liquid chromatography-tandem mass spectrometry.

Science.gov (United States)

Nielsen, Marie Katrine Klose; Johansen, Sys Stybe; Linnet, Kristian

2014-01-01

Assessment of total uncertainty of analytical methods for the measurements of drugs in human hair has mainly been derived from the analytical variation. However, in hair analysis several other sources of uncertainty will contribute to the total uncertainty. Particularly, in segmental hair analysis pre-analytical variations associated with the sampling and segmentation may be significant factors in the assessment of the total uncertainty budget. The aim of this study was to develop and validate a method for the analysis of 31 common drugs in hair using ultra-performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) with focus on the assessment of both the analytical and pre-analytical sampling variations. The validated method was specific, accurate (80-120%), and precise (CV≤20%) across a wide linear concentration range from 0.025-25 ng/mg for most compounds. The analytical variation was estimated to be less than 15% for almost all compounds. The method was successfully applied to 25 segmented hair specimens from deceased drug addicts showing a broad pattern of poly-drug use. The pre-analytical sampling variation was estimated from the genuine duplicate measurements of two bundles of hair collected from each subject after subtraction of the analytical component. For the most frequently detected analytes, the pre-analytical variation was estimated to be 26-69%. Thus, the pre-analytical variation was 3-7 folds larger than the analytical variation (7-13%) and hence the dominant component in the total variation (29-70%). The present study demonstrated the importance of including the pre-analytical variation in the assessment of the total uncertainty budget and in the setting of the 95%-uncertainty interval (±2CVT). Excluding the pre-analytical sampling variation could significantly affect the interpretation of results from segmental hair analysis. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.

The SRS analytical laboratories strategic plan

International Nuclear Information System (INIS)

Hiland, D.E.

1993-01-01

There is an acute shortage of Savannah River Site (SRS) analytical laboratory capacity to support key Department of Energy (DOE) environmental restoration and waste management (EM) programs while making the transition from traditional defense program (DP) missions as a result of the cessation of the Cold War. This motivated Westinghouse Savannah River Company (WSRC) to develop an open-quotes Analytical Laboratories Strategic Planclose quotes (ALSP) in order to provide appropriate input to SRS operating plans and justification for proposed analytical laboratory projects. The methodology used to develop this plan is applicable to all types of strategic planning

Analytic geometry

CERN Document Server

Burdette, A C

1971-01-01

Analytic Geometry covers several fundamental aspects of analytic geometry needed for advanced subjects, including calculus.This book is composed of 12 chapters that review the principles, concepts, and analytic proofs of geometric theorems, families of lines, the normal equation of the line, and related matters. Other chapters highlight the application of graphing, foci, directrices, eccentricity, and conic-related topics. The remaining chapters deal with the concept polar and rectangular coordinates, surfaces and curves, and planes.This book will prove useful to undergraduate trigonometric st

Progress report on the analytical determination of Ag2+

International Nuclear Information System (INIS)

Van Alsenoy, V.

1997-01-01

The strong oxidising properties of Ag 2+ have been used in the chemical and nuclear industry to destroy organic waste. We aim to apply the process on radioactive graphite, organic resins and effluents. The reaction mechanisms have been studied, taking into account the thermodynamic and kinetic properties of the different reactions involved. For the experimental analysis of these reactions, the accurate analytical determination of all species involved, including Ag 2+ , is needed. The results of a systematic study of the volumetric quantification of Ag 2+ using Tl + and BrO 3 - , and of the spectrophotometric and polarographic quantification of Ag + and Ag 2+ are described. The influence of the nitric acid during the quantification of Tl + by titration with KBrO 3 is investigated and the optimal analytical conditions for our purposes were determined. The best analytical results were obtained when the titration was carried out with maximum 3 M HNO 3 and 0.5 M NaCl. When those conditions are used, the determination is accurate and reproducible. The prepared Ag 2+ solutions were analysed for Ag + using polarography with a platinum electrode. The benefits and the limitation of the polarographic measurement of Ag + using a platinum electrode are described. An indirect measurement was performed by the determination of Ce 4+ after reaction with Ce 3+ . The produced Ce 4+ was measured by direct spectrophotometry. In the future, the quantification of Ag 2+ by measuring the Ce 4+ concentration produced by the reaction with Ce 3+ , will also be verified using potentiometric titration with Fe 2+ . Ag 2+ can also be determined by the direct spectrophotometry. There is a region in which the absorbance of Ag 2+ changes linearly with the concentration. Further evaluation of the titrimetric, spectrophotometric and polarographic methods will continue, until two methods give comparable Ag 2+ concentrations, beginning with the potentiometric titration of Ce 4+ with Fe 2+

Life cycle management of analytical methods.

Science.gov (United States)

Parr, Maria Kristina; Schmidt, Alexander H

2018-01-05

In modern process management, the life cycle concept gains more and more importance. It focusses on the total costs of the process from invest to operation and finally retirement. Also for analytical procedures an increasing interest for this concept exists in the recent years. The life cycle of an analytical method consists of design, development, validation (including instrumental qualification, continuous method performance verification and method transfer) and finally retirement of the method. It appears, that also regulatory bodies have increased their awareness on life cycle management for analytical methods. Thus, the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use (ICH), as well as the United States Pharmacopeial Forum discuss the enrollment of new guidelines that include life cycle management of analytical methods. The US Pharmacopeia (USP) Validation and Verification expert panel already proposed a new General Chapter 〈1220〉 "The Analytical Procedure Lifecycle" for integration into USP. Furthermore, also in the non-regulated environment a growing interest on life cycle management is seen. Quality-by-design based method development results in increased method robustness. Thereby a decreased effort is needed for method performance verification, and post-approval changes as well as minimized risk of method related out-of-specification results. This strongly contributes to reduced costs of the method during its life cycle. Copyright © 2017 Elsevier B.V. All rights reserved.

Analytic Potentials for Realistic Electrodes

International Nuclear Information System (INIS)

Barlow, Stephan E.; Taylor, Aimee E.; Swanson, Kenneth R.

2002-01-01

Finite difference algorithms are widely used to numerically solve Laplace's equation for electrode structures that are not amendable to analytic treatment. This includes essentially all real situations. However, in many cases, it is desirable to have the solution in an analytic form. A common practice is to 'fit' the numerical solution either by least squares or cubic spline approach. Neither of these approaches is really accurate, nor do they produce unique results. These limitations are avoided by our approach.

Results of single borehole hydraulic tests in the Mizunami Underground Research Laboratory project. FY 2012 - FY 2015

International Nuclear Information System (INIS)

Onoe, Hironori; Takeuchi, Ryuji

2016-11-01

This report summarize the results of the single borehole hydraulic tests of 151 sections carried out at the -300 m Stage and the -500 m Stage of the Mizunami Underground Research Laboratory from FY 2012 to FY 2015. The details of each test (test interval depth, geology, etc.) as well as the interpreted hydraulic parameters and analytical methods used are presented in this report. Furthermore, the previous results of the single borehole hydraulic tests carried out in the Regional Hydrogeological Study Project and the Mizunami Underground Research Laboratory Project before FY 2012 are also summarized in this report. (author)

Understanding Business Analytics

Science.gov (United States)

2015-01-05

analytics have been used in organizations for a variety of reasons for quite some time; ranging from the simple (generating and understanding business analytics...process. understanding business analytics 3 How well these two components are orchestrated will determine the level of success an organization has in

Field and analytical data relating to the 1972 and 1978 surveys of residual contamination of the Monte Bello Islands and Emu atomic weapons test sites

International Nuclear Information System (INIS)

Cooper, M.B.; Duggleby, J.C.

1980-12-01

Radiation surveys of the Monte Bello Islands test site in Western Australia, and the Emu test site in South Australia, were carried out in 1972 and 1978. The results have been published in ARL reports ARL/TR--010 and ARL/TR--012. The detailed field and analytical data which formed the basis of those publications are given

Analyticity estimates for the Navier-Stokes equations

DEFF Research Database (Denmark)

Herbst, I.; Skibsted, Erik

We study spatial analyticity properties of solutions of the Navier-Stokes equation and obtain new growth rate estimates for the analyticity radius. We also study stability properties of strong global solutions of the Navier-Stokes equation with data in and prove a stability result...

Applications of instrumental neutron activation analysis in the Analytical Division of the Research Center Juelich (KFA)

International Nuclear Information System (INIS)

Erdtmann, G.

1991-12-01

The Radioanalytical Chemistry Section, as a part of the Central Division of Chemical Analysis of the Research Center KFA Juelich, has the task to provide and to apply nuclear methods in the analytical service for the institutes and projects of the KFA and to customers outside. A great part of this service is trace element determinations by neutron activation analysis using the research reactor FRJ-2. The procedure for the instrumental technique is described and mainly practical aspects are reported in detail. It is based on the k 0 -method developed by Simonits and DeCorte. The results are calculated from the peak areas of the γ-lines and the corresponding k 0 -factors. A new variant of this procedure is required, if the program used for the deconvolution of the γ-spectra provides absolute decay rates of the radionuclides instead of the γ-emission rates. This variant is also described. Some examples of analyses carried out in the analytical service are presented and discussed mainly with respect to accuracy of the results and detection limits. (orig.) [de

Analyticity without Differentiability

Science.gov (United States)

Kirillova, Evgenia; Spindler, Karlheinz

2008-01-01

In this article we derive all salient properties of analytic functions, including the analytic version of the inverse function theorem, using only the most elementary convergence properties of series. Not even the notion of differentiability is required to do so. Instead, analytical arguments are replaced by combinatorial arguments exhibiting…

Is a pre-analytical process for urinalysis required?

Science.gov (United States)

Petit, Morgane; Beaudeux, Jean-Louis; Majoux, Sandrine; Hennequin, Carole

2017-10-01

For the reliable urinary measurement of calcium, phosphate and uric acid, a pre-analytical process by adding acid or base to urine samples at laboratory is recommended in order to dissolve precipitated solutes. Several studies on different kind of samples and analysers have previously shown that a such pre-analytical treatment is useless. The objective was to study the necessity of pre-analytical treatment of urine on samples collected using the V-Monovette ® (Sarstedt) system and measured on the analyser Architect C16000 (Abbott Diagnostics). Sixty urinary samples of hospitalized patients were selected (n=30 for calcium and phosphate, and n=30 for uric acid). After acidification of urine samples for measurement of calcium and phosphate, and alkalinisation for measurement of uric acid respectively, differences between results before and after the pre-analytical treatment were compared to acceptable limits recommended by the French society of clinical biology (SFBC). No difference in concentration between before and after pre-analytical treatment of urine samples exceeded acceptable limits from SFBC for measurement of calcium and uric acid. For phosphate, only one sample exceeded these acceptable limits, showing a result paradoxically lower after acidification. In conclusion, in agreement with previous study, our results show that acidification or alkalinisation of urine samples from 24 h urines or from urination is not a pre-analytical necessity for measurement of calcium, phosphate and uric acid.

Waste minimization in analytical methods

International Nuclear Information System (INIS)

Green, D.W.; Smith, L.L.; Crain, J.S.; Boparai, A.S.; Kiely, J.T.; Yaeger, J.S. Schilling, J.B.

1995-01-01

The US Department of Energy (DOE) will require a large number of waste characterizations over a multi-year period to accomplish the Department's goals in environmental restoration and waste management. Estimates vary, but two million analyses annually are expected. The waste generated by the analytical procedures used for characterizations is a significant source of new DOE waste. Success in reducing the volume of secondary waste and the costs of handling this waste would significantly decrease the overall cost of this DOE program. Selection of appropriate analytical methods depends on the intended use of the resultant data. It is not always necessary to use a high-powered analytical method, typically at higher cost, to obtain data needed to make decisions about waste management. Indeed, for samples taken from some heterogeneous systems, the meaning of high accuracy becomes clouded if the data generated are intended to measure a property of this system. Among the factors to be considered in selecting the analytical method are the lower limit of detection, accuracy, turnaround time, cost, reproducibility (precision), interferences, and simplicity. Occasionally, there must be tradeoffs among these factors to achieve the multiple goals of a characterization program. The purpose of the work described here is to add waste minimization to the list of characteristics to be considered. In this paper the authors present results of modifying analytical methods for waste characterization to reduce both the cost of analysis and volume of secondary wastes. Although tradeoffs may be required to minimize waste while still generating data of acceptable quality for the decision-making process, they have data demonstrating that wastes can be reduced in some cases without sacrificing accuracy or precision

Building Credible Human Capital Analytics for Organizational Competitive Advantage

DEFF Research Database (Denmark)

Minbaeva, Dana

2018-01-01

Despite the enormous interest in human capital analytics (HCA), organizations have struggled to move from operational reporting to HCA. This is mainly the result of the inability of analytics teams to establish credible internal HCA and demonstrate its value. In this article, we stress the import......Despite the enormous interest in human capital analytics (HCA), organizations have struggled to move from operational reporting to HCA. This is mainly the result of the inability of analytics teams to establish credible internal HCA and demonstrate its value. In this article, we stress...... the importance of conceptualizing HCA as an organizational capability and suggest a method for its operationalization. We argue that the development of HCA within an organization requires working with three dimensions of HCA: data quality, analytics capabilities, and strategic ability to act. Moreover, such work...

Analytical results for 544 water samples collected in the Attean Quartz Monzonite in the vicinity of Jackman, Maine

Science.gov (United States)

Ficklin, W.H.; Nowlan, G.A.; Preston, D.J.

1983-01-01

Water samples were collected in the vicinity of Jackman, Maine as a part of the study of the relationship of dissolved constituents in water to the sediments subjacent to the water. Each sample was analyzed for specific conductance, alkalinity, acidity, pH, fluoride, chloride, sulfate, phosphate, nitrate, sodium, potassium, calcium, magnesium, and silica. Trace elements determined were copper, zinc, molybdenum, lead, iron, manganese, arsenic, cobalt, nickel, and strontium. The longitude and latitude of each sample location and a sample site map are included in the report as well as a table of the analytical results.

Analytical computation of reflection and transmission coefficients for love waves

International Nuclear Information System (INIS)

Romanelli, F.; Vaccari, F.

1995-09-01

The computation of the transmission and reflection coefficients is an important step in the construction, if modal summation technique is used, of synthetic seismograms for 2-D or 3-D media. These coupling coefficients for Love waves at a vertical discontinuity are computed analytically. Numerical test for realistic structures show how the energy carried by an incoming mode is redistributed on the various modes existing on both sides of the vertical interface. (author). 15 refs, 8 figs

Visual analytics in medical education: impacting analytical reasoning and decision making for quality improvement.

Science.gov (United States)

Vaitsis, Christos; Nilsson, Gunnar; Zary, Nabil

2015-01-01

The medical curriculum is the main tool representing the entire undergraduate medical education. Due to its complexity and multilayered structure it is of limited use to teachers in medical education for quality improvement purposes. In this study we evaluated three visualizations of curriculum data from a pilot course, using teachers from an undergraduate medical program and applying visual analytics methods. We found that visual analytics can be used to positively impacting analytical reasoning and decision making in medical education through the realization of variables capable to enhance human perception and cognition on complex curriculum data. The positive results derived from our evaluation of a medical curriculum and in a small scale, signify the need to expand this method to an entire medical curriculum. As our approach sustains low levels of complexity it opens a new promising direction in medical education informatics research.

Analytical TEM investigations of nanoscale magnetic materials

International Nuclear Information System (INIS)

Meingast, A.

2015-01-01

Analytical transmission electron microscopy has been applied within this thesis to investigate several novel approaches to design and fabricate nanoscale magnetic materials. As the size of the features of interest rank in the sub-nanometer range, it is necessary to employ techniques with a resolution – both spatial and analytical – well below this magnitude. Only at this performance level it is possible to examine material properties, necessary for the further tailoring of materials. Within this work two key aspects have been covered: First, analytical TEM (transmission electron microscopy) investigations were carried out to get insight into novel magnetic materials with high detail. Second, new analytical and imaging possibilities enabled with the commissioning of the new ASTEM (Austrian scanning transmission electron microscope) were explored. The aberration corrected TITAN® microscope (© FEI Company) allows resolving features in scanning transmission mode (STEM) with 70 pm distance. Thereby, direct imaging of light elements in STEM mode by using the annular bright field method becomes possible. Facilitated through high beam currents within the electron probe, an increased acquisition speed of analytical signals is possible. For energy dispersive X-ray spectroscopy (EDXS) a new four detector disc geometry around the specimen was implemented, which increases the accessible collection angle. With the integration of the latest generation of image filter and electron spectrometer (GIF QuantumERS), electron energy loss spectroscopy (EELS) is boosted through the high acquisition speed and the dual spectroscopy mode. The high acquisition speed allows to record up to 1000 spectra per second and the possibility to record atomically resolved EELS maps is at hand. Hereby it is important to avoid beam damage and alteration of the material during imaging and analysis. With the simultaneous acquisition of the low and the high loss spectral region, an extended range for

Electromagnetic structure of spin-zero light nuclei from point of view of analyticity

International Nuclear Information System (INIS)

Dubnicka, S.; Dumbrajs, O.

1975-01-01

The analysis of spin-zero light nuclei electromagnetic form factors from the point of view of analyticity is carried out. The interpretation of diffraction minima in elastic electron-nucleus scattering as real zeros of form factors is advocated. The model-independent charge radii and charge distributions are calculated on the base of present-day experimental data

Intercalibration of analytical methods on marine environmental samples

International Nuclear Information System (INIS)

1988-06-01

The pollution of the seas by various chemical substances constitutes nowadays one of the principal concerns of mankind. The International Atomic Energy Agency has organized in past years several intercomparison exercises in the framework of its Analytical Quality Control Service. The present intercomparison had a double aim: first, to give laboratories participating in this intercomparison an opportunity for checking their analytical performance. Secondly, to produce on the basis of the results of this intercomparison a reference material made of fish tissue which would be accurately certified with respect to many trace elements. Such a material could be used by analytical chemists to check the validity of new analytical procedures. In total, 53 laboratories from 29 countries reported results (585 laboratory means for 48 elements). 5 refs, 52 tabs

Carboxylic acid exchangers in analytical chemistry

International Nuclear Information System (INIS)

Venkateswarlu, Ch.

1976-01-01

The literature on the use of carboxylic acid exchangers in inorganic analytical chemistry is reviewed. It is classified under two heads, based on the ionic form in which the exchanger is employed, viz., the salt form and the acid form. In the salt form, the separations reported in the beginning are mostly carried out in alkaline medium, employing ammonia and its derivatives as complexing agents to hold cations in solution. This was followed by the use of ammonium ion as an eluent from heavy weakly or neutral solutions. There are a few separations reported making use of EDTA as eluent. It appears that separation of some anions from cations can be achieved with greater ease with these exchangers than with sulphonic acid type. Contary to the general belief, carboxylic acid exchangers are used in H + form to achieve some analytical separations of cations of interest. These exchangers exhibit better sorption of some cations in presence of complexing agents containing basic nitrogen as a donor. In fact, a careful study of these exchangers with different matrices might yield really selective exchangers, than the chelating ones known commercially. From the separation cited, carboxylic acid exchangers appear to have greater potentialities in their applications, than what is normally expected. (author)

The Physics of Type Ia Supernova Light Curves. I. Analytic Results and Time Dependence

International Nuclear Information System (INIS)

Pinto, Philip A.; Eastman, Ronald G.

2000-01-01

We develop an analytic solution of the radiation transport problem for Type Ia supernovae (SNe Ia) and show that it reproduces bolometric light curves produced by more detailed calculations under the assumption of a constant-extinction coefficient. This model is used to derive the thermal conditions in the interior of SNe Ia and to study the sensitivity of light curves to various properties of the underlying supernova explosions. Although the model is limited by simplifying assumptions, it is adequate for demonstrating that the relationship between SNe Ia maximum-light luminosity and rate of decline is most easily explained if SNe Ia span a range in mass. The analytic model is also used to examine the size of various terms in the transport equation under conditions appropriate to maximum light. For instance, the Eulerian and advective time derivatives are each shown to be of the same order of magnitude as other order v/c terms in the transport equation. We conclude that a fully time-dependent solution to the transport problem is needed in order to compute SNe Ia light curves and spectra accurate enough to distinguish subtle differences of various explosion models. (c) 2000 The American Astronomical Society

Analytic Solutions of Special Functional Equations

Directory of Open Access Journals (Sweden)

Octav Olteanu

2013-07-01

Full Text Available We recall some of our earlier results on the construction of a mapping defined implicitly, without using the implicit function theorem. All these considerations work in the real case, for functions and operators. Then we consider the complex case, proving the analyticity of the function defined implicitly, under certain hypothesis. Some consequences are given. An approximating formula for the analytic form of the solution is also given. Finally, one illustrates the preceding results by an application to a concrete functional and operatorial equation. Some related examples are given.

The Case for Adopting Server-side Analytics

Science.gov (United States)

Tino, C.; Holmes, C. P.; Feigelson, E.; Hurlburt, N. E.

2017-12-01

The standard method for accessing Earth and space science data relies on a scheme developed decades ago: data residing in one or many data stores must be parsed out and shipped via internet lines or physical transport to the researcher who in turn locally stores the data for analysis. The analyses tasks are varied and include visualization, parameterization, and comparison with or assimilation into physics models. In many cases this process is inefficient and unwieldy as the data sets become larger and demands on the analysis tasks become more sophisticated and complex. For about a decade, several groups have explored a new paradigm to this model. The names applied to the paradigm include "data analytics", "climate analytics", and "server-side analytics". The general concept is that in close network proximity to the data store there will be a tailored processing capability appropriate to the type and use of the data served. The user of the server-side analytics will operate on the data with numerical procedures. The procedures can be accessed via canned code, a scripting processor, or an analysis package such as Matlab, IDL or R. Results of the analytics processes will then be relayed via the internet to the user. In practice, these results will be at a much lower volume, easier to transport to and store locally by the user and easier for the user to interoperate with data sets from other remote data stores. The user can also iterate on the processing call to tailor the results as needed. A major component of server-side analytics could be to provide sets of tailored results to end users in order to eliminate the repetitive preconditioning that is both often required with these data sets and which drives much of the throughput challenges. NASA's Big Data Task Force studied this issue. This paper will present the results of this study including examples of SSAs that are being developed and demonstrated and suggestions for architectures that might be developed for

Computing the zeros of analytic functions

CERN Document Server

Kravanja, Peter

2000-01-01

Computing all the zeros of an analytic function and their respective multiplicities, locating clusters of zeros and analytic fuctions, computing zeros and poles of meromorphic functions, and solving systems of analytic equations are problems in computational complex analysis that lead to a rich blend of mathematics and numerical analysis. This book treats these four problems in a unified way. It contains not only theoretical results (based on formal orthogonal polynomials or rational interpolation) but also numerical analysis and algorithmic aspects, implementation heuristics, and polished software (the package ZEAL) that is available via the CPC Program Library. Graduate studets and researchers in numerical mathematics will find this book very readable.

Multi-analytical characterisation of D’Aprés Cormon by José Veloso Salgado

Energy Technology Data Exchange (ETDEWEB)

Cardeira, A.M. [Faculdade de Belas-Artes da Universidade de Lisboa, Largo da Academia Nacional de Belas-Artes, 1249-058 Lisboa (Portugal); Centro de Física Atómica da Universidade de Lisboa, Av. Professor Gama Pinto 2, 1649-003 Lisboa (Portugal); Longelin, S. [Centro de Física Atómica da Universidade de Lisboa, Av. Professor Gama Pinto 2, 1649-003 Lisboa (Portugal); Costa, S.; Candeias, A. [Laboratório José de Figueiredo, Direcção Geral do Património Cultural, Rua das Janelas Verdes 37, 1249-018 Lisboa (Portugal); Laboratório HERCULES e Centro de Química de Évora, Universidade de Évora, Largo Marquês de Marialva 8, 7000 Évora (Portugal); Carvalho, M.L. [Centro de Física Atómica da Universidade de Lisboa, Av. Professor Gama Pinto 2, 1649-003 Lisboa (Portugal); Manso, M., E-mail: marta974@cii.fc.ul.pt [Centro de Física Atómica da Universidade de Lisboa, Av. Professor Gama Pinto 2, 1649-003 Lisboa (Portugal)

2014-07-15

This case study reveals the analytical characterisation carried out on ‘D’Aprés Cormon’ (1891) by Veloso Salgado, a copy of ‘Caïn’ (1880) by Fernando Cormon, belonging nowadays to Musée d’Orsay. Infrared Reflectography made in situ revealed underdrawing grid that was used to transpose the original painting to a smaller scale, pictorial style, execution method and retouched/restored areas. In situ EDXRF analysis together with Raman microscopy allowed the identification of gypsum, lead white, titanium white, yellow ochre, vermilion, ultramarine and lamp black. These results provide valuable information about the Salgado’s palette and his production technique.

An analytical approximation for resonance integral

International Nuclear Information System (INIS)

Magalhaes, C.G. de; Martinez, A.S.

1985-01-01

It is developed a method which allows to obtain an analytical solution for the resonance integral. The problem formulation is completely theoretical and based in concepts of physics of general character. The analytical expression for integral does not involve any empiric correlation or parameter. Results of approximation are compared with pattern values for each individual resonance and for sum of all resonances. (M.C.K.) [pt

Evaluating total carrying capacity of tourism using impact indicators

Directory of Open Access Journals (Sweden)

R. Sharma

2016-03-01

Full Text Available The carrying capacity is well identified tool to manage problems due to uncontrolled tourism for any destination. This report highlights the carrying capacity estimation of Kerwa tourism area, Bhopal, India. The methodology used in this report is a new two-tier mechanism of impact analysis using index numbers derived from a survey of 123 stakeholders. From this the individual component impact analysis and the total carrying capacity of the area is computed in order to state the insight of the total carrying capacity left for the tourism activities in Kerwa tourism area. It is calculated from, the results so obtained, that the Kerwa catchment area falls in “very low impact category” and hence in a healthy state of the artwork in terms of total carrying capacity. The study conveys the current need in the destination management and tourism development as a road map for the destination managers for implementing sustainable tourism.

Studies on application of neutron activation analysis -Applied research on air pollution monitoring and development of analytical method of environmental samples

International Nuclear Information System (INIS)

Chung, Yong Sam; Moon, Jong Hwa; Chung, Young Ju; Jeong, Eui Sik; Lee, Sang Mi; Kang, Sang Hun; Cho, Seung Yeon; Kwon, Young Sik; Chung, Sang Wuk; Lee, Kyu Sung; Chun, Ki Hong; Kim, Nak Bae; Lee, Kil Yong; Yoon, Yoon Yeol; Chun, Sang Ki.

1997-09-01

This research report is written for results of applied research on air pollution monitoring using instrumental neutron activation analysis. For identification and standardization of analytical method, 24 environmental samples are analyzed quantitatively, and accuracy and precision of this method are measured. Using airborne particulate matter and biomonitor chosen as environmental indicators, trace elemental concentrations of sample collected at urban and rural site monthly are determined ant then the calculation of statistics and the factor analysis are carried out for investigation of emission source. Facilities for NAA are installed in a new HANARO reactor, functional test is performed for routine operation. In addition, unified software code for NAA is developed to improve accuracy, precision and abilities of analytical processes. (author). 103 refs., 61 tabs., 19 figs

Effect of Micro Electrical Discharge Machining Process Conditions on Tool Wear Characteristics: Results of an Analytic Study

DEFF Research Database (Denmark)

Puthumana, Govindan; P., Rajeev

2016-01-01

Micro electrical discharge machining is one of the established techniques to manufacture high aspect ratio features on electrically conductive materials. This paper presents the results and inferences of an analytical study for estimating theeffect of process conditions on tool electrode wear...... characteristicsin micro-EDM process. A new approach with two novel factors anticipated to directly control the material removal mechanism from the tool electrode are proposed; using discharge energyfactor (DEf) and dielectric flushing factor (DFf). The results showed that the correlation between the tool wear rate...... (TWR) and the factors is poor. Thus, individual effects of each factor on TWR are analyzed. The factors selected for the study of individual effects are pulse on-time, discharge peak current, gap voltage and gap flushing pressure. The tool wear rate decreases linearly with an increase in the pulse on...

Recent results on analytical plasma turbulence theory: Realizability, intermittency, submarginal turbulence, and self-organized criticality

International Nuclear Information System (INIS)

Krommes, J.A.

2000-01-01

Recent results and future challenges in the systematic analytical description of plasma turbulence are described. First, the importance of statistical realizability is stressed, and the development and successes of the Realizable Markovian Closure are briefly reviewed. Next, submarginal turbulence (linearly stable but nonlinearly self-sustained fluctuations) is considered and the relevance of nonlinear instability in neutral-fluid shear flows to submarginal turbulence in magnetized plasmas is discussed. For the Hasegawa-Wakatani equations, a self-consistency loop that leads to steady-state vortex regeneration in the presence of dissipation is demonstrated and a partial unification of recent work of Drake (for plasmas) and of Waleffe (for neutral fluids) is given. Brief remarks are made on the difficulties facing a quantitatively accurate statistical description of submarginal turbulence. Finally, possible connections between intermittency, submarginal turbulence, and self-organized criticality (SOC) are considered and outstanding questions are identified

Analytic thinking reduces belief in conspiracy theories.

Science.gov (United States)

Swami, Viren; Voracek, Martin; Stieger, Stefan; Tran, Ulrich S; Furnham, Adrian

2014-12-01

Belief in conspiracy theories has been associated with a range of negative health, civic, and social outcomes, requiring reliable methods of reducing such belief. Thinking dispositions have been highlighted as one possible factor associated with belief in conspiracy theories, but actual relationships have only been infrequently studied. In Study 1, we examined associations between belief in conspiracy theories and a range of measures of thinking dispositions in a British sample (N=990). Results indicated that a stronger belief in conspiracy theories was significantly associated with lower analytic thinking and open-mindedness and greater intuitive thinking. In Studies 2-4, we examined the causational role played by analytic thinking in relation to conspiracist ideation. In Study 2 (N=112), we showed that a verbal fluency task that elicited analytic thinking reduced belief in conspiracy theories. In Study 3 (N=189), we found that an alternative method of eliciting analytic thinking, which related to cognitive disfluency, was effective at reducing conspiracist ideation in a student sample. In Study 4, we replicated the results of Study 3 among a general population sample (N=140) in relation to generic conspiracist ideation and belief in conspiracy theories about the July 7, 2005, bombings in London. Our results highlight the potential utility of supporting attempts to promote analytic thinking as a means of countering the widespread acceptance of conspiracy theories. Copyright © 2014 Elsevier B.V. All rights reserved.

A new analytical approximation to the Duffing-harmonic oscillator

International Nuclear Information System (INIS)

Fesanghary, M.; Pirbodaghi, T.; Asghari, M.; Sojoudi, H.

2009-01-01

In this paper, a novel analytical approximation to the nonlinear Duffing-harmonic oscillator is presented. The variational iteration method (VIM) is used to obtain some accurate analytical results for frequency. The accuracy of the results is excellent in the whole range of oscillation amplitude variations.

The structure and evolution of galacto-detonation waves - Some analytic results in sequential star formation models of spiral galaxies

Science.gov (United States)

Cowie, L. L.; Rybicki, G. B.

1982-01-01

Waves of star formation in a uniform, differentially rotating disk galaxy are treated analytically as a propagating detonation wave front. It is shown, that if single solitary waves could be excited, they would evolve asymptotically to one of two stable spiral forms, each of which rotates with a fixed pattern speed. Simple numerical solutions confirm these results. However, the pattern of waves that develop naturally from an initially localized disturbance is more complex and dies out within a few rotation periods. These results suggest a conclusive observational test for deciding whether sequential star formation is an important determinant of spiral structure in some class of galaxies.

Evaluation and standardisation of fast analytical techniques for destructive radwaste control

International Nuclear Information System (INIS)

De Simone, A.; Troiani, F.

2001-01-01

The document describes the work programme carried out by the Laboratorio Nazionale per la 'Caratterizzazione dei Refit Radioattivi', in the frame of the European research project Destructive Radwaste Control. The main tasks of the research work were the evaluation of fast sample pre-treatment procedures and the development of chromatographic methods coupled to fast nuclide detection by Liquid Scintillation Counting. In order to test the High Performance Ion Chromatograph (HPIC) coupled to the Liquid Scintillation Counter (LSC) on high salt content solutions, synthetic cement solutions have been prepared and spiked with several β-emitters hard to be measured with non-destructive analyses, along with other radionuclides important for the determination of the radiological inventory in radwastes. As the validation tests for the new analytical methods involved the manipulation of radioactive solutions, a remote area for HPIC-LSC apparatus has been designed and performed, in order to operate in safe conditions. According to the research programme, fast analytical methods for the chemical separation and radionuclide detection of the radioactive elements of interest, have been developed and qualified. From the results of the work, some protocols of analysis have been defined: they contain all information about operative conditions for HPIC-LSC apparatus, field of applicability, chemical and radioactive detection limits [it

Big data analytics for the virtual network topology reconfiguration use case

OpenAIRE

Gifre Renom, Lluís; Morales Alcaide, Fernando; Velasco Esteban, Luis Domingo; Ruiz Ramírez, Marc

2016-01-01

ABNO's OAM Handler is extended with big data analytics capabilities to anticipate traffic changes in volume and direction. Predicted traffic is used to trigger virtual network topology re-optimization. When the virtual topology needs to be reconfigured, predicted and current traffic matrices are used to find the optimal topology. A heuristic algorithm to adapt current virtual topology to meet both actual demands and expected traffic matrix is proposed. Experimental assessment is carried ou...

Dynamics of tachyon fields and inflation - comparison of analytical and numerical results with observation

Directory of Open Access Journals (Sweden)

Milošević M.

2016-01-01

Full Text Available The role tachyon fields may play in evolution of early universe is discussed in this paper. We consider the evolution of a flat and homogeneous universe governed by a tachyon scalar field with the DBI-type action and calculate the slow-roll parameters of inflation, scalar spectral index (n, and tensor-scalar ratio (r for the given potentials. We pay special attention to the inverse power potential, first of all to V (x ~ x−4, and compare the available results obtained by analytical and numerical methods with those obtained by observation. It is shown that the computed values of the observational parameters and the observed ones are in a good agreement for the high values of the constant X0. The possibility that influence of the radion field can extend a range of the acceptable values of the constant X0 to the string theory motivated sector of its values is briefly considered. [Projekat Ministarstva nauke Republike Srbije, br. 176021, br. 174020 i br. 43011

Experimental analytical study on heat pipes

International Nuclear Information System (INIS)

Ismail, K.A.R.; Liu, C.Y.; Murcia, N.

1981-01-01

An analytical model is developed for optimizing the thickness distribution of the porous material in heat pipes. The method was used to calculate, design and construct heat pipes with internal geometrical changes. Ordinary pipes are also constructed and tested together with the modified ones. The results showed that modified tubes are superior in performance and that the analytical model can predict their performance to within 1.5% precision. (Author) [pt

Analytical quality control [An IAEA service

Energy Technology Data Exchange (ETDEWEB)

NONE

1973-07-01

In analytical chemistry the determination of small or trace amounts of elements or compounds in different types of materials is increasingly important. The results of these findings have a great influence on different fields of science, and on human life. Their reliability, precision and accuracy must, therefore, be checked by analytical quality control measures. The International Atomic Energy Agency (IAEA) set up an Analytical Quality Control Service (AQCS) in 1962 to assist laboratories in Member States in the assessment of their reliability in radionuclide analysis, and in other branches of applied analysis in which radionuclides may be used as analytical implements. For practical reasons, most analytical laboratories are not in a position to check accuracy internally, as frequently resources are available for only one method; standardized sample material, particularly in the case of trace analysis, is not available and can be prepared by the institutes themselves only in exceptional cases; intercomparisons are organized rather seldom and many important types of analysis are so far not covered. AQCS assistance is provided by the shipment to laboratories of standard reference materials containing known quantities of different trace elements or radionuclides, as well as by the organization of analytical intercomparisons in which the participating laboratories are provided with aliquots of homogenized material of unknown composition for analysis. In the latter case the laboratories report their data to the Agency's laboratory, which calculates averages and distributions of results and advises each laboratory of its performance relative to all the others. Throughout the years several dozens of intercomparisons have been organized and many thousands of samples provided. The service offered, as a consequence, has grown enormously. The programme for 1973 and 1974, which is currently being distributed to Member States, will contain 31 different types of materials.

INTEGRATION OF GIS AND BIM FOR INDOOR GEOVISUAL ANALYTICS

Directory of Open Access Journals (Sweden)

B. Wu

2016-06-01

Full Text Available This paper presents an endeavour of integration of GIS (Geographical Information System and BIM (Building Information Modelling for indoor geovisual analytics. The merits of two types of technologies, GIS and BIM are firstly analysed in the context of indoor environment. GIS has well-developed capabilities of spatial analysis such as network analysis, while BIM has the advantages for indoor 3D modelling and dynamic simulation. This paper firstly investigates the important aspects for integrating GIS and BIM. Different data standards and formats such as the IFC (Industry Foundation Classes and GML (Geography Markup Language are discussed. Their merits and limitations in data transformation between GIS and BIM are analysed in terms of semantic and geometric information. An optimized approach for data exchange between GIS and BIM datasets is then proposed. After that, a strategy of using BIM for 3D indoor modelling, GIS for spatial analysis, and BIM again for visualization and dynamic simulation of the analysis results is presented. Based on the developments, this paper selects a typical problem, optimized indoor emergency evacuation, to demonstrate the integration of GIS and BIM for indoor geovisual analytics. The block Z of the Hong Kong Polytechnic University is selected as a test site. Detailed indoor and outdoor 3D models of the block Z are created using a BIM software Revit. The 3D models are transferred to a GIS software ArcGIS to carry out spatial analysis. Optimized evacuation plans considering dynamic constraints are generated based on network analysis in ArcGIS assuming there is a fire accident inside the building. The analysis results are then transferred back to BIM software for visualization and dynamic simulation. The developed methods and results are of significance to facilitate future development of GIS and BIM integrated solutions in various applications.

Competing on analytics.

Science.gov (United States)

Davenport, Thomas H

2006-01-01

We all know the power of the killer app. It's not just a support tool; it's a strategic weapon. Companies questing for killer apps generally focus all their firepower on the one area that promises to create the greatest competitive advantage. But a new breed of organization has upped the stakes: Amazon, Harrah's, Capital One, and the Boston Red Sox have all dominated their fields by deploying industrial-strength analytics across a wide variety of activities. At a time when firms in many industries offer similar products and use comparable technologies, business processes are among the few remaining points of differentiation--and analytics competitors wring every last drop of value from those processes. Employees hired for their expertise with numbers or trained to recognize their importance are armed with the best evidence and the best quantitative tools. As a result, they make the best decisions. In companies that compete on analytics, senior executives make it clear--from the top down--that analytics is central to strategy. Such organizations launch multiple initiatives involving complex data and statistical analysis, and quantitative activity is managed atthe enterprise (not departmental) level. In this article, professor Thomas H. Davenport lays out the characteristics and practices of these statistical masters and describes some of the very substantial changes other companies must undergo in order to compete on quantitative turf. As one would expect, the transformation requires a significant investment in technology, the accumulation of massive stores of data, and the formulation of company-wide strategies for managing the data. But, at least as important, it also requires executives' vocal, unswerving commitment and willingness to change the way employees think, work, and are treated.

[Ecotourism carrying capacity of Hangzhou Xixi National Wetland Park in China].

Science.gov (United States)

Li, Rui; Rong, Liang

2007-10-01

In this paper, an integrated estimation on the ecotourism carrying capacity of Hangzhou Xixi National Wetland Park in China was made from the aspects of ecological carrying capacity, spatial carrying capacity, facility carrying capacity, management carrying capacity, and psychological carrying capacity. The results indicated that the tourism carrying capacity of the Park was 4 145 - 6 450 persons per day. The rational distance between man and bird was first adopted to determine the ecotourism carrying capacity of wetland, which provided an effective solution both to fully ensure bird safety and to appropriately develop wetland tourism. The estimation of psychological carrying capacity based on tourist satisfaction degree reflected more objectively the extent the tourist demands satisfied at the planning, construction and management of tour places. Such an integrated estimation method based on the distance between man and bird and the tourist satisfaction degree could be of practical and instructive significances in the planning and management of wetland parks.

From the Phenix irradiation end to the analytical results: PROFIL R target destructive characterization

International Nuclear Information System (INIS)

Ferlay, G.; Dancausse, J. Ph.

2009-01-01

In the French long-lived radionuclide (LLRN) transmutation program, several irradiation experiments were initiated in the Phenix fast neutron reactor to obtain a better understanding of the transmutation processes. The PROFIL experiments are performed in order to collect accurate information on the total capture integral cross sections of the principal heavy isotopes and some important fission products in the spectral range of fast reactors. One of the final goals is to diminish the uncertainties on the capture cross-section of the fission products involved in reactivity losses in fast reactors. This program includes two parts: PROFIL-R irradiated in a standard fast reactor spectrum and PROFIL-M irradiated in a moderated spectrum. The PROFIL-R and PROFIL-M irradiations were completed in August 2005 and May 2008, respectively. For both irradiations more than a hundred containers with isotopes of pure actinides and other elements in different chemical forms must be characterized. This raises a technical and analytical challenge: how to recover by selective dissolution less than 5 mg of isotope powder from a container with dimensions of only a few millimeters using hot cell facilities, and how to determine analytically both trace and ultra-trace elemental and isotopic compositions with sufficient accuracy to be useful for code calculations. (authors)

Decisions through data: analytics in healthcare.

Science.gov (United States)

Wills, Mary J

2014-01-01

The amount of data in healthcare is increasing at an astonishing rate. However, in general, the industry has not deployed the level of data management and analysis necessary to make use of those data. As a result, healthcare executives face the risk of being overwhelmed by a flood of unusable data. In this essay I argue that, in order to extract actionable information, leaders must take advantage of the promise of data analytics. Small data, predictive modeling expansion, and real-time analytics are three forms of data analytics. On the basis of my analysis for this study, I recommend all three for adoption. Recognizing the uniqueness of each organization's situation, I also suggest that practices, hospitals, and healthcare systems examine small data and conduct real-time analytics and that large-scale organizations managing populations of patients adopt predictive modeling. I found that all three solutions assist in the collection, management, and analysis of raw data to improve the quality of care and decrease costs.

An overview of gamma-hydroxybutyric acid: pharmacodynamics, pharmacokinetics, toxic effects, addiction, analytical methods, and interpretation of results.

Science.gov (United States)

Andresen, H; Aydin, B E; Mueller, A; Iwersen-Bergmann, S

2011-09-01

Abuse of gamma-hydroxybutyric acid (GHB) has been known since the early 1990's, but is not as widespread as the consumption of other illegal drugs. However, the number of severe intoxications with fatal outcomes is comparatively high; not the least of which is brought about by the consumption of the currently legal precursor substances gamma-butyrolactone (GBL) and 1,4-butanediol (1,4-BD). In regards to previous assumptions, addiction to GHB or its analogues can occur with severe symptoms of withdrawal. Moreover, GHB can be used for drug-facilitated sexual assaults. Its pharmacological effects are generated mainly by interaction with both GABA(B) and GHB receptors, as well as its influence on other transmitter systems in the human brain. Numerous analytical methods for determining GHB using chromatographic techniques were published in recent years, and an enzymatic screening method was established. However, the short window of GHB detection in blood or urine due to its rapid metabolism is a challenge. Furthermore, despite several studies addressing this problem, evaluation of analytical results can be difficult: GHB is a metabolite of GABA (gamma-aminobutyric acid); a differentiation between endogenous and exogenous concentrations has to be made. Apart from this, in samples with a longer storage interval and especially in postmortem specimens, higher levels can be measured due to GHB generation during this postmortem interval or storage time. Copyright © 2011 John Wiley & Sons, Ltd.

Supercritical fluid analytical methods

International Nuclear Information System (INIS)

Smith, R.D.; Kalinoski, H.T.; Wright, B.W.; Udseth, H.R.

1988-01-01

Supercritical fluids are providing the basis for new and improved methods across a range of analytical technologies. New methods are being developed to allow the detection and measurement of compounds that are incompatible with conventional analytical methodologies. Characterization of process and effluent streams for synfuel plants requires instruments capable of detecting and measuring high-molecular-weight compounds, polar compounds, or other materials that are generally difficult to analyze. The purpose of this program is to develop and apply new supercritical fluid techniques for extraction, separation, and analysis. These new technologies will be applied to previously intractable synfuel process materials and to complex mixtures resulting from their interaction with environmental and biological systems

An approximate analytical solution for describing surface runoff and sediment transport over hillslope

Science.gov (United States)

Tao, Wanghai; Wang, Quanjiu; Lin, Henry

2018-03-01

Soil and water loss from farmland causes land degradation and water pollution, thus continued efforts are needed to establish mathematical model for quantitative analysis of relevant processes and mechanisms. In this study, an approximate analytical solution has been developed for overland flow model and sediment transport model, offering a simple and effective means to predict overland flow and erosion under natural rainfall conditions. In the overland flow model, the flow regime was considered to be transitional with the value of parameter β (in the kinematic wave model) approximately two. The change rate of unit discharge with distance was assumed to be constant and equal to the runoff rate at the outlet of the plane. The excess rainfall was considered to be constant under uniform rainfall conditions. The overland flow model developed can be further applied to natural rainfall conditions by treating excess rainfall intensity as constant over a small time interval. For the sediment model, the recommended values of the runoff erosion calibration constant (cr) and the splash erosion calibration constant (cf) have been given in this study so that it is easier to use the model. These recommended values are 0.15 and 0.12, respectively. Comparisons with observed results were carried out to validate the proposed analytical solution. The results showed that the approximate analytical solution developed in this paper closely matches the observed data, thus providing an alternative method of predicting runoff generation and sediment yield, and offering a more convenient method of analyzing the quantitative relationships between variables. Furthermore, the model developed in this study can be used as a theoretical basis for developing runoff and erosion control methods.

Analytical Hierarchy Process for the selection of strategic alternatives for introduction of infrastructure virtual desktop infrastructure in the university

Directory of Open Access Journals (Sweden)

Katerina A. Makoviy

2017-12-01

Full Text Available The task of choosing a strategy for implementing the virtual desktop infrastructure into the IT infrastructure of the university is considered. The infrastructure of virtual desktops is a technology that provides centralization of management of client workplaces, increase the service life of computers in classrooms. The analysis of strengths and weaknesses, threats and opportunities for introducing virtualization in the university. Alternatives to implementation based on the results of the pilot project have been developed. To obtain quantitative estimates in the SWOT - analysis of the pilot project, the analytical hierarchy process is used. The analysis of implementation of the pilot project by experts is carried out and the integral value of quantitative estimates of various alternatives is generated. The combination of the analytical hierarchy process and SWOT - analysis allows you to choose the optimal strategy for implementing desktop virtualization.

Data Analytics in CRM Processes: A Literature Review

Directory of Open Access Journals (Sweden)

Gončarovs Pāvels

2017-12-01

Full Text Available Nowadays, the data scarcity problem has been supplanted by the data deluge problem. Marketers and Customer Relationship Management (CRM specialists have access to rich data on consumer behaviour. The current challenge is effective utilisation of these data in CRM processes and selection of appropriate data analytics techniques. Data analytics techniques help find hidden patterns in data. The present paper explores the characteristics of data analytics as the integrated tool in CRM for sales managers. The paper aims at analysing some of the different analytics methods and tools which can be used for continuous improvement of CRM processes. A systematic literature has been conducted to achieve this goal. The results of the review highlight the most frequently considered CRM processes in the context of data analytics.

[Biological markers for the status of vitamins B12 and D: the importance of some analytical aspects in relation to clinical interpretation of results].

Science.gov (United States)

Boulat, O; Rey, F; Mooser, V

2012-10-31

Biological markers for the status of vitamins B12 and D: the importance of some analytical aspects in relation to clinical interpretation of results When vitamin B12 deficiency is expressed clinically, the diagnostic performance of total cobalamin is identical to that of holotranscobalamin II. In subclinical B12 deficiency, the two aforementioned markers perform less well. Additional analysis of a second, functional marker (methylmalonate or homocysteine) is recommended. Different analytical approaches for 25-hydroxyvitamin D quantification, the marker of vitamin D deficiency, are not yet standardized. Measurement biases of up to +/- 20% compared with the original method used to establish threshold values are still observed.

Analytical prediction of fuel assembly spacer grid loss coefficient

International Nuclear Information System (INIS)

Lim, J. S.; Nam, K. I.; Park, S. K.; Kwon, J. T.; Park, W. J.

2002-01-01

The analytical prediction model of the fuel assembly spacer grid pressure loss coefficient has been studied. The pressure loss of gap between the test section wall and spacer grid was separated from the current model and the different friction drag coefficient on spacer straps from high Reynolds number region were used to low Reynolds number region. The analytical model has been verified based on the hydraulic pressure drop test results for the spacer grids of three types for 5x5, 16x16(or 17x17) arrays. The analytical model predicts the pressure loss coefficients obtained from test results within the maximum errors of 12% and 7% for 5x5 test bundle and full size bundle, respectively, at Reynolds number 500,000 of the core operating condition. This result shows that the analytical model can be used for research and design change of the nuclear fuel assembly

Analytical Chemistry Division annual progress report for period ending December 31, 1989

International Nuclear Information System (INIS)

1990-04-01

The Analytical Chemistry Division of Oak Ridge National Laboratory (ORNL) is a large and diversified organization. As such, it serves a multitude of functions for a clientele that exists both in and outside of ORNL. These functions fall into the following general categories: Analytical Research, Development and Implementation; Programmatic Research, Development, and Utilization; and Technical Support. The Analytical Chemistry Division is organized into four major sections, each which may carry out any of the three types of work mentioned above. Chapters 1 through 4 of this report highlight progress within the four sections during the period January 1 to December 31, 1989. A brief discussion of the division's role in an especially important environmental program is given in Chapter 5. Information about quality assurance, safety, and training programs is presented in Chapter 6, along with a tabulation of analyses rendered. Publications, oral presentations, professional activities, educational programs, and seminars are cited in Chapters 7 and 8. Approximately 69 articles, 41 proceedings, and 31 reports were published, and 151 oral presentations were given during this reporting period. Some 308,981 determinations were performed

Analytical Chemistry Division annual progress report for period ending December 31, 1982

International Nuclear Information System (INIS)

Lyon, W.S.

1983-05-01

The Analytical Chemistry Dvision of Oak Ridge National laboratory (ORNL) serves a multitude of functions for a clientele that exists both in and outside ORNL. These functions fall into the following general categories: (1) analytical research, development, and implementation; (2) programmatic research, development, and utilization; and (3) technical support. The Division is organized into five major sections, each of which may carry out any type of work falling in the three categories mentioned above. Chapters 1 through 5 of this report highlight progress within the five sections (analytical methodology, mass and emission spectrometry, radioactive materials, bio/organic analysis, and general and environmental analysis) during the period January 1, 1982 to December 31, 1982. A short summary introduces each chapter to indicate work scope. Information about quality assurance and safety programs is presented in Chapter 6, along with a tabulation of analyses rendered. Publications, oral presentations, professional activities, educational programs, and seminars are cited in Chapters 7 and 8. Approximately 61 articles, 32 proceedings publications and 37 reports have been published, and 107 oral presentations were given during this reporting period

Semi-analytic solution to planar Helmholtz equation

Directory of Open Access Journals (Sweden)

Tukač M.

2013-06-01

Full Text Available Acoustic solution of interior domains is of great interest. Solving acoustic pressure fields faster with lower computational requirements is demanded. A novel solution technique based on the analytic solution to the Helmholtz equation in rectangular domain is presented. This semi-analytic solution is compared with the finite element method, which is taken as the reference. Results show that presented method is as precise as the finite element method. As the semi-analytic method doesn’t require spatial discretization, it can be used for small and very large acoustic problems with the same computational costs.

Analytical eigenstates for the quantum Rabi model

International Nuclear Information System (INIS)

Zhong, Honghua; Xie, Qiongtao; Lee, Chaohong; Batchelor, Murray T

2013-01-01

We develop a method to find analytical solutions for the eigenstates of the quantum Rabi model. These include symmetric, anti-symmetric and asymmetric analytic solutions given in terms of the confluent Heun functions. Both regular and exceptional solutions are given in a unified form. In addition, the analytic conditions for determining the energy spectrum are obtained. Our results show that conditions proposed by Braak (2011 Phys. Rev. Lett. 107 100401) are a type of sufficiency condition for determining the regular solutions. The well-known Judd isolated exact solutions appear naturally as truncations of the confluent Heun functions. (paper)

MASTERS OF ANALYTICAL TRADECRAFT: CERTIFYING THE STANDARDS AND ANALYTIC RIGOR OF INTELLIGENCE PRODUCTS

Science.gov (United States)

2016-04-01

AU/ACSC/2016 AIR COMMAND AND STAFF COLLEGE AIR UNIVERSITY MASTERS OF ANALYTICAL TRADECRAFT: CERTIFYING THE STANDARDS AND ANALYTIC RIGOR OF...establishing unit level certified Masters of Analytic Tradecraft (MAT) analysts to be trained and entrusted to evaluate and rate the standards and...cues) ideally should meet or exceed effective rigor (based on analytical process).4 To accomplish this, decision makers should not be left to their

Complete Spinal Accessory Nerve Palsy From Carrying Climbing Gear.

Science.gov (United States)

Coulter, Jess M; Warme, Winston J

2015-09-01

We report an unusual case of spinal accessory nerve palsy sustained while transporting climbing gear. Spinal accessory nerve injury is commonly a result of iatrogenic surgical trauma during lymph node excision. This particular nerve is less frequently injured by blunt trauma. The case reported here results from compression of the spinal accessory nerve for a sustained period-that is, carrying a load over the shoulder using a single nylon rope for 2.5 hours. This highlights the importance of using proper load-carrying equipment to distribute weight over a greater surface area to avoid nerve compression in the posterior triangle of the neck. The signs and symptoms of spinal accessory nerve palsy and its etiology are discussed. This report is particularly relevant to individuals involved in mountaineering and rock climbing but can be extended to anyone carrying a load with a strap over one shoulder and across the body. Copyright © 2015 Wilderness Medical Society. Published by Elsevier Inc. All rights reserved.

Tank 241-S-106, cores 183, 184 and 187 analytical results for the final report

International Nuclear Information System (INIS)

Esch, R.A.

1997-01-01

This document is the final laboratory report for tank 241-S-106 push mode core segments collected between February 12, 1997 and March 21, 1997. The segments were subsampled and analyzed in accordance with the Tank Push Mode Core Sampling and Analysis Plan (TSAP), the Tank Safety Screening Data Quality Objective (Safety DQO), the Historical Model Evaluation Data Requirements (Historical DQO) and the Data Quality Objective to Support Resolution of the Organic Complexant Safety Issue (Organic DQO). The analytical results are included in Table 1. Six of the twenty-four subsamples submitted for the differential scanning calorimetry (DSC) analysis exceeded the notification limit of 480 Joules/g stated in the DQO. Appropriate notifications were made. Total Organic Carbon (TOC) analyses were performed on all samples that produced exotherms during the DSC analysis. All results were less than the notification limit of three weight percent TOC. No cyanide analysis was performed, per agreement with the Tank Safety Program. None of the samples submitted for Total Alpha Activity exceeded notification limits as stated in the TSAP. Statistical evaluation of results by calculating the 95% upper confidence limit is not performed by the 222-S Laboratory and is not considered in this report. No core composites were created because there was insufficient solid material from any of the three core sampling events to generate a composite that would be representative of the tank contents

Targeted Drug-Carrying Bacteriophages as Antibacterial Nanomedicines▿

Science.gov (United States)

Yacoby, Iftach; Bar, Hagit; Benhar, Itai

2007-01-01

While the resistance of bacteria to traditional antibiotics is a major public health concern, the use of extremely potent antibacterial agents is limited by their lack of selectivity. As in cancer therapy, antibacterial targeted therapy could provide an opportunity to reintroduce toxic substances to the antibacterial arsenal. A desirable targeted antibacterial agent should combine binding specificity, a large drug payload per binding event, and a programmed drug release mechanism. Recently, we presented a novel application of filamentous bacteriophages as targeted drug carriers that could partially inhibit the growth of Staphylococcus aureus bacteria. This partial success was due to limitations of drug-loading capacity that resulted from the hydrophobicity of the drug. Here we present a novel drug conjugation chemistry which is based on connecting hydrophobic drugs to the phage via aminoglycoside antibiotics that serve as solubility-enhancing branched linkers. This new formulation allowed a significantly larger drug-carrying capacity of the phages, resulting in a drastic improvement in their performance as targeted drug-carrying nanoparticles. As an example for a potential systemic use for potent agents that are limited for topical use, we present antibody-targeted phage nanoparticles that carry a large payload of the hemolytic antibiotic chloramphenicol connected through the aminoglycoside neomycin. We demonstrate complete growth inhibition toward the pathogens Staphylococcus aureus, Streptococcus pyogenes, and Escherichia coli with an improvement in potency by a factor of ∼20,000 compared to the free drug. PMID:17404004

Analytical evaluation on loss of off-side electric power simulation of the High Temperature Engineering Test Reactor

International Nuclear Information System (INIS)

Takeda, Takeshi; Nakagawa, Shigeaki; Tachibana, Yukio; Takada, Eiji; Kunitomi, Kazuhiko

2000-03-01

A rise-to-power test of the high temperature engineering test reactor (HTTR) started on September 28 in 1999 for establishing and upgrading the technological basis for the high temperature gas-cooled reactor (HTGR). A loss of off-site electric power test of the HTTR from the normal operation under 15 and 30 MW thermal power will be carried out in the rise-to-power test. Analytical evaluations on transient behaviors of the reactor and plant during the loss of off-site electric power were conducted. These estimations are proposed as benchmark problems for the IAEA coordinated research program on 'Evaluation of HTGR Performance'. This report describes an event scenario of transient during the loss of off-site electric power, the outline of major components and system, detailed thermal and nuclear data set for these problems and pre-estimation results of the benchmark problems by an analytical code 'ACCORD' for incore and plant dynamics of the HTGR. (author)

Analytical chemistry

International Nuclear Information System (INIS)

Choi, Jae Seong

1993-02-01

This book is comprised of nineteen chapters, which describes introduction of analytical chemistry, experimental error and statistics, chemistry equilibrium and solubility, gravimetric analysis with mechanism of precipitation, range and calculation of the result, volume analysis on general principle, sedimentation method on types and titration curve, acid base balance, acid base titration curve, complex and firing reaction, introduction of chemical electro analysis, acid-base titration curve, electrode and potentiometry, electrolysis and conductometry, voltammetry and polarographic spectrophotometry, atomic spectrometry, solvent extraction, chromatograph and experiments.

Analytical chemistry

Energy Technology Data Exchange (ETDEWEB)

Choi, Jae Seong

1993-02-15

This book is comprised of nineteen chapters, which describes introduction of analytical chemistry, experimental error and statistics, chemistry equilibrium and solubility, gravimetric analysis with mechanism of precipitation, range and calculation of the result, volume analysis on general principle, sedimentation method on types and titration curve, acid base balance, acid base titration curve, complex and firing reaction, introduction of chemical electro analysis, acid-base titration curve, electrode and potentiometry, electrolysis and conductometry, voltammetry and polarographic spectrophotometry, atomic spectrometry, solvent extraction, chromatograph and experiments.

Nuclear analytical techniques in medicine

International Nuclear Information System (INIS)

Cesareo, R.

1988-01-01

This book acquaints one with the fundamental principles and the instrumentation relevant to analytical technique based on atomic and nuclear physics, as well as present and future biomedical applications. Besides providing a theoretical description of the physical phenomena, a large part of the book is devoted to applications in the medical and biological field, particularly in hematology, forensic medicine and environmental science. This volume reviews methods such as the possibility of carrying out rapid multi-element analysis of trace elements on biomedical samples, in vitro and in vivo, by XRF-analysis; the ability of the PIXE-microprobe to analyze in detail and to map trace elements in fragments of biomedical samples or inside the cells; the potentiality of in vivo nuclear activation analysis for diagnostic purposes. Finally, techniques are described such as radiation scattering (elastic and inelastic scattering) and attenuation measurements which will undoubtedly see great development in the immediate future

OLAP – Online Analytical Processing

Directory of Open Access Journals (Sweden)

Azoumana Kamagate

2013-07-01

Full Text Available Este procesamiento analítico le da pautas al mundo empresarial, en permitir realizar análisis multidimensional de las bases de datos de gran volumen en las organizaciones, para realizar toma de decisiones de los mismos (que son el tema de consultas especiales. Un sistema OLAP debe cumplir las reglas del Dr. Codd: Se tiene que tener una visión multidimensional de los datos; Pensar en dimensiones y métricas de Negocio. No en tablas y en campos. Abstract This analytical process sets out the guidelines for the business world by carrying out a multidimensional analysis of high volume databases in organizations for decision-making. An OLAP system should obey the rules of Dr. Codd: you should have a multidimensional vision of the data: thinking in terms of the dimensions and metrics of business. Not tables and fields.

Nuclear analytical techniques in medicine

Energy Technology Data Exchange (ETDEWEB)

Cesareo, R.

1988-01-01

This book acquaints one with the fundamental principles and the instrumentation relevant to analytical technique based on atomic and nuclear physics, as well as present and future biomedical applications. Besides providing a theoretical description of the physical phenomena, a large part of the book is devoted to applications in the medical and biological field, particularly in hematology, forensic medicine and environmental science. This volume reviews methods such as the possibility of carrying out rapid multi-element analysis of trace elements on biomedical samples, in vitro and in vivo, by XRF-analysis; the ability of the PIXE-microprobe to analyze in detail and to map trace elements in fragments of biomedical samples or inside the cells; the potentiality of in vivo nuclear activation analysis for diagnostic purposes. Finally, techniques are described such as radiation scattering (elastic and inelastic scattering) and attenuation measurements which will undoubtedly see great development in the immediate future.

Irregular analytical errors in diagnostic testing - a novel concept.

Science.gov (United States)

Vogeser, Michael; Seger, Christoph

2018-02-23

In laboratory medicine, routine periodic analyses for internal and external quality control measurements interpreted by statistical methods are mandatory for batch clearance. Data analysis of these process-oriented measurements allows for insight into random analytical variation and systematic calibration bias over time. However, in such a setting, any individual sample is not under individual quality control. The quality control measurements act only at the batch level. Quantitative or qualitative data derived for many effects and interferences associated with an individual diagnostic sample can compromise any analyte. It is obvious that a process for a quality-control-sample-based approach of quality assurance is not sensitive to such errors. To address the potential causes and nature of such analytical interference in individual samples more systematically, we suggest the introduction of a new term called the irregular (individual) analytical error. Practically, this term can be applied in any analytical assay that is traceable to a reference measurement system. For an individual sample an irregular analytical error is defined as an inaccuracy (which is the deviation from a reference measurement procedure result) of a test result that is so high it cannot be explained by measurement uncertainty of the utilized routine assay operating within the accepted limitations of the associated process quality control measurements. The deviation can be defined as the linear combination of the process measurement uncertainty and the method bias for the reference measurement system. Such errors should be coined irregular analytical errors of the individual sample. The measurement result is compromised either by an irregular effect associated with the individual composition (matrix) of the sample or an individual single sample associated processing error in the analytical process. Currently, the availability of reference measurement procedures is still highly limited, but LC

Correlation studies between the results of workplace monitoring and biological parameters

International Nuclear Information System (INIS)

Khan, A.H.

1987-10-01

Some nuclear-based and non-nuclear analytical techniques have been used to look for correlations between the results of workplace monitoring and biological parameters of exposed workers in various workplace environments. The analytical competence of the external beam thick and thin target particle-induced X-ray emission (PIXE) analysis has been established for elemental analysis of air particulates and biological materials. The capability of low-energy photon spectrometry (LEPS) has also been demonstrated. Using the methods of PIXE and flame AAS, some studies have been performed on the elemental composition of air particulates, human head hair, nail and urine collected in different workplace environments in Dhaka. This report contains a brief account of this research along with an outline of future research projects to be carried out in this and other related areas. 13 refs, 5 figs, 7 tabs

Researches carried out by Japan Atomic Energy Research Institute in the field of environmental protection

International Nuclear Information System (INIS)

Kavakami, Yu.

2000-01-01

The results of works, accomplished by the Japanese Atomic Energy Research Institute, related to evaluation of the nuclear facilities effect on the environmental medium, are considered. The analytical results of studies on the environmental radioactivity with an account of meteorological aspects, evaluation of the nuclear facilities impact on the environmental medium are presented. Studies on the radionuclide behavior in the environmental medium cover large range of problems: distribution of natural and artificial radionuclides in the surface medium and their migration; evaluation of the human radiation doses on the account of radionuclides; environmental medium protection and risk evaluation. The method for measuring the 90 Sr concentrations with application of ion-exchange tars and a simple method for determining the radon activity with application of liquid scintillators were developed in the process of the study on creation of the environmental medium monitoring. The studies, related to the content and behavior of tritium, Pu, 137 Cs, 247 Am, as well as mercury and other heavy metals in the environmental medium were carried out. The methods for evaluating the NPPs radiation effect on the population with an account of the radioactive substances releases both by normal operation and in the emergency situations, were developed. Attention is also paid to research programs and developed codes [ru

[Pre-analytical stability before centrifugation of 7 biochemical analytes in whole blood].

Science.gov (United States)

Perrier-Cornet, Andreas; Moineau, Marie-Pierre; Narbonne, Valérie; Plee-Gautier, Emmanuelle; Le Saos, Fabienne; Carre, Jean-Luc

2015-01-01

The pre-analytical stability of 7 biochemical parameters (parathyroid hormone -PTH-, vitamins A, C E and D, 1,25-dihydroxyvitamin D and insulin) at +4 °C, was studied on whole blood samples before centrifugation. The impact of freezing at -20°C was also analyzed/performed for PTH and vitamin D. The differences in the results of assays for whole blood samples, being kept for different times between sampling time and analysis, from 9 healthy adults, were compaired by using a Student t test. The 7 analytes investigated remained stable up to 4 hours at +4°C in whole blood. This study showed that it is possible to accept uncentrifuged whole blood specimens kept at +4°C before analysis. PTH is affected by freezing whereas vitamin D is not.

Analytical Propagation of Uncertainty in Life Cycle Assessment Using Matrix Formulation

DEFF Research Database (Denmark)

Imbeault-Tétreault, Hugues; Jolliet, Olivier; Deschênes, Louise

2013-01-01

with Monte Carlo results. The sensitivity and contribution of input parameters to output uncertainty were also analytically calculated. This article outlines an uncertainty analysis of the comparison between two case study scenarios. We conclude that the analytical method provides a good approximation...... on uncertainty calculation. This article shows the importance of the analytical method in uncertainty calculation, which could lead to a more complete uncertainty analysis in LCA practice....... uncertainty assessment is not a regular step in LCA. An analytical approach based on Taylor series expansion constitutes an effective means to overcome the drawbacks of the Monte Carlo method. This project aimed to test the approach on a real case study, and the resulting analytical uncertainty was compared...

Business analytics a practitioner's guide

CERN Document Server

Saxena, Rahul

2013-01-01

This book provides a guide to businesses on how to use analytics to help drive from ideas to execution. Analytics used in this way provides "full lifecycle support" for business and helps during all stages of management decision-making and execution.The framework presented in the book enables the effective interplay of business, analytics, and information technology (business intelligence) both to leverage analytics for competitive advantage and to embed the use of business analytics into the business culture. It lays out an approach for analytics, describes the processes used, and provides gu

Seabird tissue archival and monitoring project: Egg collections and analytical results 1999-2002

Science.gov (United States)

Vander Pol, Stacy S.; Christopher, Steven J.; Roseneau, David G.; Becker, Paul R.; Day, Russel D.; Kucklick, John R.; Pugh, Rebecca S.; Simac, Kristin S.; Weston-York, Geoff

2003-01-01

have been developed by STAMP (see York et al. 2001). Eggs are being collected on an annual basis for several species at nesting colonies throughout Alaska. Aliquots of these egg samples are being analyzed on a regular basis for persistent organic pollutants and mercury. Results of this work have been published in scientific journals (Christopher et al. 2002) and in conference proceedings (Kucklick et al. 2002; Vander Pol et al. 2002a, 2002b). The intent of this report is to provide an up-to-date description of STAMP. The report contains the most recent egg collection inventory, analytical data, preliminary interpretations based on these data, and a discussion of possible future directions of the project.

eAnalytics: Dynamic Web-based Analytics for the Energy Industry

Directory of Open Access Journals (Sweden)

Paul Govan

2016-11-01

Full Text Available eAnalytics is a web application built on top of R that provides dynamic data analytics to energy industry stakeholders. The application allows users to dynamically manipulate chart data and style through the Shiny package’s reactive framework. eAnalytics currently supports a number of features including interactive datatables, dynamic charting capabilities, and the ability to save, download, or export information for further use. Going forward, the goal for this project is that it will serve as a research hub for discovering new relationships in the data. The application is illustrated with a simple tutorial of the user interface design.

Analytical BPS Maxwell-Higgs Vortices

International Nuclear Information System (INIS)

Hora, E. da; Ferreira, M. M. Jr.; Santos, C. dos; Casana, R.

2014-01-01

We have established a prescription for the calculation of analytical vortex solutions in the context of generalized Maxwell-Higgs models whose overall dynamics is controlled by two positive functions of the scalar field, namely, f(|ϕ|) and w(|ϕ|). We have also determined a natural constraint between these functions and the Higgs potential U(|ϕ|), allowing the existence of axially symmetric Bogomol'nyi-Prasad-Sommerfield (BPS) solutions possessing finite energy. Furthermore, when the generalizing functions are chosen suitably, the nonstandard BPS equations can be solved exactly. We have studied some examples, comparing them with the usual Abrikosov-Nielsen-Olesen (ANO) solution. The overall conclusion is that the analytical self-dual vortices are well-behaved in all relevant sectors, strongly supporting the consistency of the respective generalized models. In particular, our results mimic well-known properties of the usual (numerical) configurations, as localized energy density, while contributing to the understanding of topological solitons and their description by means of analytical methods.

Extension of analytical indicial aerodynamics to generic trapezoidal wings in subsonic flow

Directory of Open Access Journals (Sweden)

Andrea DA RONCH

2018-04-01

Full Text Available Analytical indicial aerodynamic functions are calculated for several trapezoidal wings in subsonic flow, with a Mach number 0.3 ≤ Ma ≤ 0.7. The formulation herein proposed extends well-known aerodynamic theories, which are limited to thin aerofoils in incompressible flow, to generic trapezoidal wing planforms. Firstly, a thorough study is executed to assess the accuracy and limitation of analytical predictions, using unsteady results from two state-of-the-art computational fluid dynamics solvers as cross-validated benchmarks. Indicial functions are calculated for a step change in the angle of attack and for a sharp-edge gust, each for four wing configurations and three Mach numbers. Then, analytical and computational indicial responses are used to predict dynamic derivatives and the maximum lift coefficient following an encounter with a one-minus-cosine gust. It is found that the analytical results are in excellent agreement with the computational results for all test cases. In particular, the deviation of the analytical results from the computational results is within the scatter or uncertainty in the data arising from using two computational fluid dynamics solvers. This indicates the usefulness of the developed analytical theories. Keywords: Analytical approach, CFD, Compressible flow, Gust response, Indicial aerodynamics, Trapezoidal wing

Energetics of load carrying in Nepalese porters.

Science.gov (United States)

Bastien, Guillaume J; Schepens, Bénédicte; Willems, Patrick A; Heglund, Norman C

2005-06-17

Nepalese porters routinely carry head-supported loads equal to 100 to 200% of their body weight (Mb) for many days up and down steep mountain footpaths at high altitudes. Previous studies have shown that African women carry head-supported loads of up to 60% of their Mb far more economically than army recruits carrying equivalent loads in backpacks. Here we show that Nepalese porters carry heavier loads even more economically than African women. Female Nepalese porters, for example, carry on average loads that are 10% of their Mb heavier than the maximum loads carried by the African women, yet do so at a 25% smaller metabolic cost.

The Viking X ray fluorescence experiment - Analytical methods and early results

Science.gov (United States)

Clark, B. C., III; Castro, A. J.; Rowe, C. D.; Baird, A. K.; Rose, H. J., Jr.; Toulmin, P., III; Christian, R. P.; Kelliher, W. C.; Keil, K.; Huss, G. R.

1977-01-01

Ten samples of the Martian regolith have been analyzed by the Viking lander X ray fluorescence spectrometers. Because of high-stability electronics, inclusion of calibration targets, and special data encoding within the instruments the quality of the analyses performed on Mars is closely equivalent to that attainable with the same instruments operated in the laboratory. Determination of absolute elemental concentrations requires gain drift adjustments, subtraction of background components, and use of a mathematical response model with adjustable parameters set by prelaunch measurements on selected rock standards. Bulk fines at both Viking landing sites are quite similar in composition, implying that a chemically and mineralogically homogeneous regolith covers much of the surface of the planet. Important differences between samples include a higher sulfur content in what appear to be duricrust fragments than in fines and a lower iron content in fines taken from beneath large rocks than those taken from unprotected surface material. Further extensive reduction of these data will allow more precise and more accurate analytical numbers to be determined and thus a more comprehensive understanding of elemental trends between samples.

Critical Discourse Analysis. The Elaboration of a Problem Oriented Discourse Analytic Approach After Foucault

Directory of Open Access Journals (Sweden)

Rainer Diaz-Bone

2006-05-01

Full Text Available Abstract: The German discourse researcher Siegfried JÄGER from Duisburg is the first to have published a German-language book about the methodology of discourse analysis after FOUCAULT. JÄGER integrates in his work the discourse analytic work of Jürgen LINK as well as the interdisciplinary discussion carried on in the discourse analytic journal "kultuRRevolution" (Journal for Applied Discourse Analysis. JÄGER and his co-workers were associated with the Duisburger Institute for Language Research and Social Research (DISS, see http://www.diss-duisburg.de/ for 20 years, developing discourse theory and the methodology of discourse analysis. The interview was done via e-mail. It depicts the discourse analytic approach of JÄGER and his co-workers following the works of FOUCAULT and LINK. The interview reconstructs JÄGERs vita and his academic career. Further topics of the interview are the agenda of JÄGERs discourse studies, methodological considerations, the (problematic relationship between FOUCAULDian discourse analysis and (discourses, linguistics, styles and organization of research and questions concerning applied discourse analytic research as a form of critical intervention. URN: urn:nbn:de:0114-fqs0603219

Characterization of dilation-analytic operators

Energy Technology Data Exchange (ETDEWEB)

Balslev, E; Grossmann, A; Paul, T

1986-01-01

Dilation analytic vectors and operators are characterized in a new representation of quantum mechanical states through functions analytic on the upper half-plane. In this space H/sub o/-bounded operators are integral operators and criteria for dilation analyticity are given in terms of analytic continuation outside of the half-plane for functions and for kernels. A sufficient condition is given for an integral operator in momentum space to be dilation-analytic.

Perspectives on making big data analytics work for oncology.

Science.gov (United States)

El Naqa, Issam

2016-12-01

Oncology, with its unique combination of clinical, physical, technological, and biological data provides an ideal case study for applying big data analytics to improve cancer treatment safety and outcomes. An oncology treatment course such as chemoradiotherapy can generate a large pool of information carrying the 5Vs hallmarks of big data. This data is comprised of a heterogeneous mixture of patient demographics, radiation/chemo dosimetry, multimodality imaging features, and biological markers generated over a treatment period that can span few days to several weeks. Efforts using commercial and in-house tools are underway to facilitate data aggregation, ontology creation, sharing, visualization and varying analytics in a secure environment. However, open questions related to proper data structure representation and effective analytics tools to support oncology decision-making need to be addressed. It is recognized that oncology data constitutes a mix of structured (tabulated) and unstructured (electronic documents) that need to be processed to facilitate searching and subsequent knowledge discovery from relational or NoSQL databases. In this context, methods based on advanced analytics and image feature extraction for oncology applications will be discussed. On the other hand, the classical p (variables)≫n (samples) inference problem of statistical learning is challenged in the Big data realm and this is particularly true for oncology applications where p-omics is witnessing exponential growth while the number of cancer incidences has generally plateaued over the past 5-years leading to a quasi-linear growth in samples per patient. Within the Big data paradigm, this kind of phenomenon may yield undesirable effects such as echo chamber anomalies, Yule-Simpson reversal paradox, or misleading ghost analytics. In this work, we will present these effects as they pertain to oncology and engage small thinking methodologies to counter these effects ranging from

On finding the analytic dependencies of the external field potential on the control function when optimizing the beam dynamics

Science.gov (United States)

Ovsyannikov, A. D.; Kozynchenko, S. A.; Kozynchenko, V. A.

2017-12-01

When developing a particle accelerator for generating the high-precision beams, the injection system design is of importance, because it largely determines the output characteristics of the beam. At the present paper we consider the injection systems consisting of electrodes with given potentials. The design of such systems requires carrying out simulation of beam dynamics in the electrostatic fields. For external field simulation we use the new approach, proposed by A.D. Ovsyannikov, which is based on analytical approximations, or finite difference method, taking into account the real geometry of the injection system. The software designed for solving the problems of beam dynamics simulation and optimization in the injection system for non-relativistic beams has been developed. Both beam dynamics and electric field simulations in the injection system which use analytical approach and finite difference method have been made and the results presented in this paper.

Analysis of those national analytic epidemiological studies that by obtention the exposure-response functions

International Nuclear Information System (INIS)

Molina, E.; Meneses, E.

2003-01-01

The Impact Pathway methodology, developed in the frame of Extern E project for estimating of the external costs or externalities of the energy use, has as one of their main steps the health impact evaluation. This evaluation is carried out through exposure-response functions. In previous estimates of the external costs of power generation in Cuba, functions obtained in international studies were used. The main objective of this work was to carry out a summarized critical analysis of those national analytic epidemiological studies that, according the exposed methodology, consider the main aspects specialized with views to the possible preliminary proposal of functions exposure-response (FER) based own in epidemiologic evidences. In agreement with the analysis, the results show that the great majority of the studies are not useful for the FER establishment, at least in their present form. A minority studies exists that contributes limited evidence and their reanalysis could increase their contribution to the propose purpose. Finally the main problems found in the studies are enumerated revision object

Development of analytical techniques for water and environmental samples (2)

Energy Technology Data Exchange (ETDEWEB)

Eum, Chul Hun; Jeon, Chi Wan; Jung, Kang Sup; Song, Kyung Sun; Kim, Sang Yeon [Korea Institute of Geology Mining and Materials, Taejon (Korea)

1998-12-01

The purpose of this study is to develop new analytical methods with good detection limit for toxic inorganic and organic compounds. The analyses of CN, organic acids, particulate materials in environmental samples have been done using several methods such as Ion Chromatography, SPE, SPME, GC/MS, GC/FID, SPLITT (split-flow thin cell fractionation) during the second year of this project. Advantage and disadvantage of several distillation method (by KS, JIS, EPA) for CN analysis in wastewater were investigated. As the results, we proposed new distillation apparatus for CN analysis, which was proved to be simpler, faster and to get better recovery than conventional apparatus. And ion chromatograph/pulsed amperometric detector (IC/PAD) system instead of colorimetry for CN detection was setup to solve matrix interference. And SPE(solid phase extraction) and SPME (solid phase micro extraction) as liquid-solid extraction technique were applied to the analysis of phenols in wastewater. Optimum experimental conditions and factors influencing analytical results were determined. From these results, It could be concluded that C{sub 18} cartridge and polystyrene-divinylbenzene disk in SPE method, polyacrylate fiber in SPME were proper solid phase adsorbent for phenol. Optimum conditions to analyze phenol derivatives simultaneously were established. Also, Continuous SPLITT (Split-flow thin cell) Fractionation (CSF) is a new preparative separation technique that is useful for fractionation of particulate and macromolecular materials. CSF is carried out in a thin ribbon-like channel equipped with two splitters at both inlet and outlet of the channel. In this work, we set up a new CSF system, and tested using polystyrene latex standard particles. And then we fractionated particles contained in air and underground water based on their sedimentation coefficients using CSF. (author). 27 refs., 13 tabs., 31 figs.

A new tool for the evaluation of the analytical procedure: Green Analytical Procedure Index.

Science.gov (United States)

Płotka-Wasylka, J

2018-05-01

A new means for assessing analytical protocols relating to green analytical chemistry attributes has been developed. The new tool, called GAPI (Green Analytical Procedure Index), evaluates the green character of an entire analytical methodology, from sample collection to final determination, and was created using such tools as the National Environmental Methods Index (NEMI) or Analytical Eco-Scale to provide not only general but also qualitative information. In GAPI, a specific symbol with five pentagrams can be used to evaluate and quantify the environmental impact involved in each step of an analytical methodology, mainly from green through yellow to red depicting low, medium to high impact, respectively. The proposed tool was used to evaluate analytical procedures applied in the determination of biogenic amines in wine samples, and polycyclic aromatic hydrocarbon determination by EPA methods. GAPI tool not only provides an immediately perceptible perspective to the user/reader but also offers exhaustive information on evaluated procedures. Copyright © 2018 Elsevier B.V. All rights reserved.

Google analytics integrations

CERN Document Server

Waisberg, Daniel

2015-01-01

A roadmap for turning Google Analytics into a centralized marketing analysis platform With Google Analytics Integrations, expert author Daniel Waisberg shows you how to gain a more meaningful, complete view of customers that can drive growth opportunities. This in-depth guide shows not only how to use Google Analytics, but also how to turn this powerful data collection and analysis tool into a central marketing analysis platform for your company. Taking a hands-on approach, this resource explores the integration and analysis of a host of common data sources, including Google AdWords, AdSens

Theoretical, analytical, and statistical interpretation of environmental data

International Nuclear Information System (INIS)

Lombard, S.M.

1974-01-01

The reliability of data from radiochemical analyses of environmental samples cannot be determined from nuclear counting statistics alone. The rigorous application of the principles of propagation of errors, an understanding of the physics and chemistry of the species of interest in the environment, and the application of information from research on the analytical procedure are all necessary for a valid estimation of the errors associated with analytical results. The specific case of the determination of plutonium in soil is considered in terms of analytical problems and data reliability. (U.S.)

Hyperactive Children are at Risk of Dental Caries -An Analytical Study

Directory of Open Access Journals (Sweden)

C Jeevika

2013-01-01

Full Text Available Background: Attention-deficit/hyperactivity disorder (ADHD is well recognized in western countries, but there were no much reports of ADHD from India. Aim: To determine the relationship of ADHD with dental caries. Materials & Method : A cross-sectional analytical study was carried out among 120 children aged around 8-15 years who were randomly selected from normal and special schools located in Chennai city. The children were categorized as ADHD according to the criteria of Diagnostic and Statistical Manual of Mental Disorders (DSM-IV.The questionnaire was given to parents and teachers. It included details of DSM- IV criteria, age, sex, demographic details, past dental history, hours diet chart and any medication taken previously. The oral hygiene status was assessed using Oral Hygiene index simplified (OHI-S and the caries experience was recorded using DMFT index. Categorical data were compared by the Chi-square test. The odds ratio (OR was calculated with logistic regression. A multivariate analysis was carried out to adjust for gender, dental caries status of primary and permanent teeth. Results : Males are more in ADHD group when compared to females. Oral Hygiene Status of ADHD group was significantly better than control group. ADHD children were 3.1 times more odds of getting dental caries than children in the control group.

Analytic two-loop results for self-energy- and vertex-type diagrams with one non-zero mass

International Nuclear Information System (INIS)

Fleischer, J.; Kotikov, A.V.; Veretin, O.L.

1999-01-01

For a large class of two-loop self-energy- and vertex-type diagrams with only one non-zero mass (m) and the vertices also with only one non-zero external momentum squared (q 2 ) the first few expansion coefficients are calculated by the large mass expansion. This allows us to 'guess' the general structure of these coefficients and to verify them in terms of certain classes of 'basis elements', which are essentially harmonic sums. Since for this case with only one non-zero mass the large mass expansion and the Taylor series in terms of q 2 are identical, this approach yields analytic expressions of the Taylor coefficients, from which the diagram can be easily evaluated numerically in a large domain of the complex q 2 -plane by well known methods. It is also possible to sum the Taylor series and present the results in terms of polylogarithms

Analytical study of flow instability behaviour in a boiling two-phase natural circulation loop under low quality conditions

International Nuclear Information System (INIS)

Nayak, A.K.; Kumar, N.; Vijayan, P.K.; Saha, D.; Sinha, R.K.

2002-01-01

Analytical investigations have been carried out to study the flow instability behaviour in a boiling two-phase natural circulation loop under low quality conditions. For this purpose, the computer code TINFLO-S has been developed. The code solves the conservation equations of mass, momentum and energy and equation of state for homogeneous equilibrium twophase flow using linear analytical technique. The results of the code have been validated with the experimental data of the loop for both the steady state and stability. The study reveals that the stability behaviour of low quality flow oscillations is different from that of the high quality flow oscillations. The instability reduces with increase in power and throttling at the inlet of the heater. The instability first increases and then reduces with increase in pressure at any subcooling. The effects of diameter of riser pipe, heater and the height of the riser on this instability are also investigated. (orig.) [de

Measurement of very low amounts of arsenic in soils and waters: is ICP-MS the indispensable analytical tool?

Science.gov (United States)

López-García, Ignacio; Marín-Hernández, Juan Jose; Perez-Sirvent, Carmen; Hernandez-Cordoba, Manuel

2017-04-01

The toxicity of arsenic and its wide distribution in the nature needs nowadays not to be emphasized, and the convenience of reliable analytical tools for arsenic determination at very low levels is clear. Leaving aside atomic fluorescence spectrometers specifically designed for this purpose, the task is currently carried out by using inductively coupled plasma mass spectrometry (ICP-MS), a powerful but expensive technique that is not available in all laboratories. However, as the recent literature clearly shows, a similar or even better analytical performance for the determination of several elements can be achieved by replacing the ICP-MS instrument by an AAS spectrometer (which is commonly present in any laboratory and involves low acquisition and maintenance costs) provided that a simple microextraction step is used to preconcentrate the sample. This communication reports the optimization and results obtained with a new analytical procedure based on this idea and focused to the determination of very low concentrations of arsenic in waters and extracts from soils and sediments. The procedure is based on a micro-solid phase extraction process for the separation and preconcentration of arsenic that uses magnetic particles covered with silver nanoparticles functionalized with the sodium salt of 2-mercaptoethane-sulphonate (MESNa). This composite is obtained in an easy way in the laboratory. After the sample is treated with a low amount (only a few milligrams) of the magnetic material, the solid phase is separated by means of a magnetic field, and then introduced into an electrothermal atomizer (ETAAS) for arsenic determination. The preconcentration factor is close to 200 with a detection limit below 0.1 µg L-1 arsenic. Speciation of As(III) and As(V) can be achieved by means of two extractions carried out at different acidity. The results for total arsenic are verified using certified reference materials. The authors are grateful to the Comunidad Autonóma de la

SRL online Analytical Development

International Nuclear Information System (INIS)

Jenkins, C.W.

1991-01-01

The Savannah River Site is operated by the Westinghouse Savannah River Co. for the Department of Energy to produce special nuclear materials for defense. R ampersand D support for site programs is provided by the Savannah River Laboratory, which I represent. The site is known primarily for its nuclear reactors, but actually three fourths of the efforts at the site are devoted to fuel/target fabrication, fuel/target reprocessing, and waste management. All of these operations rely heavily on chemical processes. The site is therefore a large chemical plant. There are then many potential applications for process analytical chemistry at SRS. The Savannah River Laboratory (SRL) has an Analytical Development Section of roughly 65 personnel that perform analyses for R ampersand D efforts at the lab, act as backup to the site Analytical Laboratories Department and develop analytical methods and instruments. I manage a subgroup of the Analytical Development Section called the Process Control ampersand Analyzer Development Group. The Prime mission of this group is to develop online/at-line analytical systems for site applications

Analytical mechanics

CERN Document Server

Lemos, Nivaldo A

2018-01-01

Analytical mechanics is the foundation of many areas of theoretical physics including quantum theory and statistical mechanics, and has wide-ranging applications in engineering and celestial mechanics. This introduction to the basic principles and methods of analytical mechanics covers Lagrangian and Hamiltonian dynamics, rigid bodies, small oscillations, canonical transformations and Hamilton–Jacobi theory. This fully up-to-date textbook includes detailed mathematical appendices and addresses a number of advanced topics, some of them of a geometric or topological character. These include Bertrand's theorem, proof that action is least, spontaneous symmetry breakdown, constrained Hamiltonian systems, non-integrability criteria, KAM theory, classical field theory, Lyapunov functions, geometric phases and Poisson manifolds. Providing worked examples, end-of-chapter problems, and discussion of ongoing research in the field, it is suitable for advanced undergraduate students and graduate students studying analyt...

Analytical chemistry

Energy Technology Data Exchange (ETDEWEB)

Chae, Myeong Hu; Lee, Hu Jun; Kim, Ha Seok

1989-02-15

This book give explanations on analytical chemistry with ten chapters, which deal with development of analytical chemistry, the theory of error with definition and classification, sample and treatment gravimetry on general process of gravimetry in aqueous solution and non-aqueous solution, precipitation titration about precipitation reaction and types, complexometry with summary and complex compound, oxidation-reduction equilibrium on electrode potential and potentiometric titration, solvent extraction and chromatograph and experiment with basic operation for chemical experiment.

Analytical chemistry

International Nuclear Information System (INIS)

Chae, Myeong Hu; Lee, Hu Jun; Kim, Ha Seok

1989-02-01

This book give explanations on analytical chemistry with ten chapters, which deal with development of analytical chemistry, the theory of error with definition and classification, sample and treatment gravimetry on general process of gravimetry in aqueous solution and non-aqueous solution, precipitation titration about precipitation reaction and types, complexometry with summary and complex compound, oxidation-reduction equilibrium on electrode potential and potentiometric titration, solvent extraction and chromatograph and experiment with basic operation for chemical experiment.

Analytic cognitive style predicts religious and paranormal belief.

Science.gov (United States)

Pennycook, Gordon; Cheyne, James Allan; Seli, Paul; Koehler, Derek J; Fugelsang, Jonathan A

2012-06-01

An analytic cognitive style denotes a propensity to set aside highly salient intuitions when engaging in problem solving. We assess the hypothesis that an analytic cognitive style is associated with a history of questioning, altering, and rejecting (i.e., unbelieving) supernatural claims, both religious and paranormal. In two studies, we examined associations of God beliefs, religious engagement (attendance at religious services, praying, etc.), conventional religious beliefs (heaven, miracles, etc.) and paranormal beliefs (extrasensory perception, levitation, etc.) with performance measures of cognitive ability and analytic cognitive style. An analytic cognitive style negatively predicted both religious and paranormal beliefs when controlling for cognitive ability as well as religious engagement, sex, age, political ideology, and education. Participants more willing to engage in analytic reasoning were less likely to endorse supernatural beliefs. Further, an association between analytic cognitive style and religious engagement was mediated by religious beliefs, suggesting that an analytic cognitive style negatively affects religious engagement via lower acceptance of conventional religious beliefs. Results for types of God belief indicate that the association between an analytic cognitive style and God beliefs is more nuanced than mere acceptance and rejection, but also includes adopting less conventional God beliefs, such as Pantheism or Deism. Our data are consistent with the idea that two people who share the same cognitive ability, education, political ideology, sex, age and level of religious engagement can acquire very different sets of beliefs about the world if they differ in their propensity to think analytically. Copyright © 2012 Elsevier B.V. All rights reserved.

Aplikasi Analytical Hierarchy Process Pada Pemilihan Metode Analisis Zat Organik Dalam Air

Directory of Open Access Journals (Sweden)

Dino Rimantho

2016-07-01

Full Text Available Water is one of the food products analyzed in water chemistry and environmental laboratories. One of the parameters analyzed are organic substances. The number of samples that were not comparable with the analytical skills can cause delays in test results. Analytical Hierarchy Process applied to evaluate the analytical methods used. Alternative methods tested include titrimetric method, spectrophotometry, and total organic carbon (TOC. Respondents consisted of deputy technical manager, laboratory coordinator, and two senior analysts. Alternative results obtained are methods of TOC. Proposed improvements alternative analytical method based on the results obtained, the method of the TOC with a 10-15 minute analysis time and use of CRM to the validity of the analysis results.

The Components of Accounting-Analytical Provision of the Business Structures Diagnostics in Implementation of Strategic Competencies

Directory of Open Access Journals (Sweden)

Koliesnichenko Anastasiia S.

2017-12-01

Full Text Available The article is aimed at disclosing the essence of strategic competencies, highlighting their role, identifying the features of formation and embodiment in a real competitive environment, based on decomposition of this economic category. It has been proved that each component of the strategy of business structures allows to implement strategic competencies on the basis of the use of structural-organizational, institutional and diagnostic instrumentarium. The functional purpose of the diagnostic apparatus in the process of implementation of strategic competencies was researched, the role of IFRS and ISA in the system of accounting-analytical provision of diagnostics of economic management of business structures was substantiated. Based on the obtained results, it can be argued that in the future it will be expedient to carry out a deeper study of theoretical and applied aspects of forming the components of accounting-analytical provision of building the strategies of business structures for the formation of the maximum adapted management systems through the use of efficienct accounting, organizational and control mechanisms.

A clean laboratory for ultratrace analysis: the ultratrace analytical facility (UTAF)

International Nuclear Information System (INIS)

Jadhav, S.G.; Sounderajan, Suvarna; Kumar, Sanjukta A.; Udas, A.C.; Ramanathan, M.; Palrecha, M.M.; Sudersanan, M.

2003-06-01

Thare has been an increasing demand for the quantification of various elements at extremely low concentrations in a variety of samples such as high purity materials, environmental and biological samples. The need for a controlled environment to obtain reliable and reproducible data necessitates the use of strategies and practices to minimize contamination during the analytical procedure. This report describes the protocol observed in our clean laboratory to eliminate contamination and ensure low laboratory blanks and some of the methodologies developed to carry out the analysis. The analysis is carried out by Graphite Furnace Atomic Absorption Spectrometry and electrochemical techniques such as Anodic/ Cathodic / Adsorptive Stripping Voltammetry. Characterisation of 5N (total impurities 10 ppm) arsenic is routinely carried out. Al in serum of patients suffering from end stage renal failure are also analyzed. Pine leaves, spinach, carrot puree and milk powder have been characterized for Al and Hg content and bovine serum has been characterized for Cu, Zn, Na, K in samples as part of intercomparison exercises. (author)

Application of an analytical method for solution of thermal hydraulic conservation equations

Energy Technology Data Exchange (ETDEWEB)

Fakory, M.R. [Simulation, Systems & Services Technologies Company (S3 Technologies), Columbia, MD (United States)

1995-09-01

An analytical method has been developed and applied for solution of two-phase flow conservation equations. The test results for application of the model for simulation of BWR transients are presented and compared with the results obtained from application of the explicit method for integration of conservation equations. The test results show that with application of the analytical method for integration of conservation equations, the Courant limitation associated with explicit Euler method of integration was eliminated. The results obtained from application of the analytical method (with large time steps) agreed well with the results obtained from application of explicit method of integration (with time steps smaller than the size imposed by Courant limitation). The results demonstrate that application of the analytical approach significantly improves the numerical stability and computational efficiency.

Applied predictive analytics principles and techniques for the professional data analyst

CERN Document Server

Abbott, Dean

2014-01-01

Learn the art and science of predictive analytics - techniques that get results Predictive analytics is what translates big data into meaningful, usable business information. Written by a leading expert in the field, this guide examines the science of the underlying algorithms as well as the principles and best practices that govern the art of predictive analytics. It clearly explains the theory behind predictive analytics, teaches the methods, principles, and techniques for conducting predictive analytics projects, and offers tips and tricks that are essential for successful predictive mode

Analytical results of variance reduction characteristics of biased Monte Carlo for deep-penetration problems

International Nuclear Information System (INIS)

Murthy, K.P.N.; Indira, R.

1986-01-01

An analytical formulation is presented for calculating the mean and variance of transmission for a model deep-penetration problem. With this formulation, the variance reduction characteristics of two biased Monte Carlo schemes are studied. The first is the usual exponential biasing wherein it is shown that the optimal biasing parameter depends sensitively on the scattering properties of the shielding medium. The second is a scheme that couples exponential biasing to the scattering angle biasing proposed recently. It is demonstrated that the coupled scheme performs better than exponential biasing

An analytical solution for the Marangoni mixed convection boundary layer flow

DEFF Research Database (Denmark)

Moghimi, M. A.; Kimiaeifar, Amin; Rahimpour, M.

2010-01-01

In this article, an analytical solution for a Marangoni mixed convection boundary layer flow is presented. A similarity transform reduces the Navier-Stokes equations to a set of nonlinear ordinary differential equations, which are solved analytically by means of the homotopy analysis method (HAM...... the convergence of the solution. The numerical solution of the similarity equations is developed and the results are in good agreement with the analytical results based on the HAM....

Propulsion and launching analysis of variable-mass rockets by analytical methods

OpenAIRE

D.D. Ganji; M. Gorji; M. Hatami; A. Hasanpour; N. Khademzadeh

2013-01-01

In this study, applications of some analytical methods on nonlinear equation of the launching of a rocket with variable mass are investigated. Differential transformation method (DTM), homotopy perturbation method (HPM) and least square method (LSM) were applied and their results are compared with numerical solution. An excellent agreement with analytical methods and numerical ones is observed in the results and this reveals that analytical methods are effective and convenient. Also a paramet...

Customer Intelligence Analytics on Social Networks

Directory of Open Access Journals (Sweden)

Brano MARKIĆ

2016-08-01

Full Text Available Discovering needs, habits and consumer behavior is the primary task of marketing analytics. It is necessary to integrate marketing and analytical skills with IT skills. Such knowledge integration allows access to data (structured and unstructured, their analysis and finding out information about the opinions, attitudes, needs and behavior of customers. In the paper is set the hypothesis that software tools can collect data (messages from social networks, analyze the content of messages and get to know the attitudes of customers about a product, service, tourist destination with the ultimate goal of improving customer relations. Experimental results are based on the analysis of the content of social network Facebook by using the package and function R language. This language showed a satisfactory application and development power in analysis of textual data on social networks for marketing analytics.

Second International Workshop on Teaching Analytics

DEFF Research Database (Denmark)

Vatrapu, Ravi; Reimann, Peter; Halb, Wolfgang

2013-01-01

Teaching Analytics is conceived as a subfield of learning analytics that focuses on the design, development, evaluation, and education of visual analytics methods and tools for teachers in primary, secondary, and tertiary educational settings. The Second International Workshop on Teaching Analytics...... (IWTA) 2013 seeks to bring together researchers and practitioners in the fields of education, learning sciences, learning analytics, and visual analytics to investigate the design, development, use, evaluation, and impact of visual analytical methods and tools for teachers’ dynamic diagnostic decision...

Study of trace elements in milk by nuclear analytical techniques

International Nuclear Information System (INIS)

Gharib, A.; Rahimi, H.; Pyrovan, H.; Raoffi, N.J.; Taherpoor, H.

1985-01-01

This work is part of project with the IAEA in a coordinated program on 'Trace Elements in Human and Bio-environmental Systems' to evaluate their nutritional requierements, interrelations and the role of trace elements in health, metabolism, etc. Cow's milk is regarded to be one of the most important and most nutritious foodstuffs of mankind. Hence, as a first step, an elemental analysis for milk was carried out: a few samples of pasteurized milk and local samples were investigated for essential and toxic trace elements. The secondary aim of the project was the assessment of various analytical techniques involved. AAS, PIXE and NAA are presented here. The latter was applied both instrumentally and radiochemically. Although the results pertaining to the various methods employed are not in good agreement, there is, however, some justification to clarify this internal inconsistency. PIXE analysis is very fast and rather routine, but the technique for trace element analysis needs certain adaptations and improvement. (author)

Optimization of instrumental neutron activation analysis method by means of 2k experimental design technique aiming the validation of analytical procedures

International Nuclear Information System (INIS)

Petroni, Robson; Moreira, Edson G.

2013-01-01

In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) methods were carried out for the determination of the elements arsenic, chromium, cobalt, iron, rubidium, scandium, selenium and zinc in biological materials. The aim is to validate the analytical methods for future accreditation at the National Institute of Metrology, Quality and Technology (INMETRO). The 2 k experimental design was applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. Samples of Mussel Tissue Certified Reference Material and multi-element standards were analyzed considering the following variables: sample decay time, counting time and sample distance to detector. The standard multi-element concentration (comparator standard), mass of the sample and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN - CNEN/SP). Optimized conditions were estimated based on the results of z-score tests, main effect and interaction effects. The results obtained with the different experimental configurations were evaluated for accuracy (precision and trueness) for each measurement. (author)

Analytic solution for a quartic electron mirror

Energy Technology Data Exchange (ETDEWEB)

Straton, Jack C., E-mail: straton@pdx.edu

2015-01-15

A converging electron mirror can be used to compensate for spherical and chromatic aberrations in an electron microscope. This paper presents an analytical solution to a diode (two-electrode) electrostatic mirror including the next term beyond the known hyperbolic shape. The latter is a solution of the Laplace equation to second order in the variables perpendicular to and along the mirror's radius (z{sup 2}−r{sup 2}/2) to which we add a quartic term (kλz{sup 4}). The analytical solution is found in terms of Jacobi cosine-amplitude functions. We find that a mirror less concave than the hyperbolic profile is more sensitive to changes in mirror voltages and the contrary holds for the mirror more concave than the hyperbolic profile. - Highlights: • We find the analytical solution for electron mirrors whose curvature has z4 dependence added to the usual z{sup 2} – r{sup 2}/2 terms. • The resulting Jacobi cosine-amplitude function reduces to the well-known cosh solution in the limit where the new term is 0. • This quartic term gives a mirror designer additional flexibility for eliminating spherical and chromatic aberrations. • The possibility of using these analytical results to approximately model spherical tetrode mirrors close to axis is noted.

Analytical Chemistry Division annual progress report for period ending December 31, 1989

Energy Technology Data Exchange (ETDEWEB)

1990-04-01

The Analytical Chemistry Division of Oak Ridge National Laboratory (ORNL) is a large and diversified organization. As such, it serves a multitude of functions for a clientele that exists both in and outside of ORNL. These functions fall into the following general categories: Analytical Research, Development and Implementation; Programmatic Research, Development, and Utilization; and Technical Support. The Analytical Chemistry Division is organized into four major sections, each which may carry out any of the three types of work mentioned above. Chapters 1 through 4 of this report highlight progress within the four sections during the period January 1 to December 31, 1989. A brief discussion of the division's role in an especially important environmental program is given in Chapter 5. Information about quality assurance, safety, and training programs is presented in Chapter 6, along with a tabulation of analyses rendered. Publications, oral presentations, professional activities, educational programs, and seminars are cited in Chapters 7 and 8. Approximately 69 articles, 41 proceedings, and 31 reports were published, and 151 oral presentations were given during this reporting period. Some 308,981 determinations were performed.

Analytic information processing style in epilepsy patients.

Science.gov (United States)

Buonfiglio, Marzia; Di Sabato, Francesco; Mandillo, Silvia; Albini, Mariarita; Di Bonaventura, Carlo; Giallonardo, Annateresa; Avanzini, Giuliano

2017-08-01

Relevant to the study of epileptogenesis is learning processing, given the pivotal role that neuroplasticity assumes in both mechanisms. Recently, evoked potential analyses showed a link between analytic cognitive style and altered neural excitability in both migraine and healthy subjects, regardless of cognitive impairment or psychological disorders. In this study we evaluated analytic/global and visual/auditory perceptual dimensions of cognitive style in patients with epilepsy. Twenty-five cryptogenic temporal lobe epilepsy (TLE) patients matched with 25 idiopathic generalized epilepsy (IGE) sufferers and 25 healthy volunteers were recruited and participated in three cognitive style tests: "Sternberg-Wagner Self-Assessment Inventory", the C. Cornoldi test series called AMOS, and the Mariani Learning style Questionnaire. Our results demonstrate a significant association between analytic cognitive style and both IGE and TLE and respectively a predominant auditory and visual analytic style (ANOVA: p values <0,0001). These findings should encourage further research to investigate information processing style and its neurophysiological correlates in epilepsy. Copyright © 2017 Elsevier Inc. All rights reserved.

Research on Water Resources Design Carrying Capacity

Directory of Open Access Journals (Sweden)

Guanghua Qin

2016-04-01

Full Text Available Water resources carrying capacity (WRCC is a recently proposed management concept, which aims to support sustainable socio-economic development in a region or basin. However, the calculation of future WRCC is not well considered in most studies, because water resources and the socio-economic development mode for one area or city in the future are quite uncertain. This paper focused on the limits of traditional methods of WRCC and proposed a new concept, water resources design carrying capacity (WRDCC, which incorporated the concept of design. In WRDCC, the population size that the local water resources can support is calculated based on the balance of water supply and water consumption, under the design water supply and design socio-economic development mode. The WRDCC of Chengdu city in China is calculated. Results show that the WRDCC (population size of Chengdu city in development modeI (II, III will be 997 ×104 (770 × 104, 504 × 104 in 2020, and 934 × 104 (759 × 104, 462 × 104 in 2030. Comparing the actual population to the carrying population (WRDCC in 2020 and 2030, a bigger gap will appear, which means there will be more and more pressure on the society-economic sustainable development.

Follow-up and control of analytical results from environmental monitoring program of the Radioactive Waste Disposal Facility - Abadia de Goias

International Nuclear Information System (INIS)

Peixoto, Claudia Marques; Jacomino, Vanusa Maria Feliciano

2000-01-01

The analytical results for the 12 month period (August/1997 to July/1998) of the Environmental Monitoring Program operational phase of the radioactive waste disposal facility 'Abadia de Goias' (DIGOI), located in the District of Goiania, are summarized in this report. A statistical treatment of the data using control graphs is also presented. The use of these graphs allows the arrangement of the data in a way that facilitates process control and visualization of data trends and periodicity organized according to temporal variation. A comparison is made of these results vs. those obtained during the pre-operational phase. Moreover, the effective equivalent dose received by the public individuals for different critical pathways is estimated. (author)

Two-dimensional analytical solution for nodal calculation of nuclear reactors

International Nuclear Information System (INIS)

Silva, Adilson C.; Pessoa, Paulo O.; Silva, Fernando C.; Martinez, Aquilino S.

2017-01-01

Highlights: • A proposal for a coarse mesh nodal method is presented. • The proposal uses the analytical solution of the two-dimensional neutrons diffusion equation. • The solution is performed homogeneous nodes with dimensions of the fuel assembly. • The solution uses four average fluxes on the node surfaces as boundary conditions. • The results show good accuracy and efficiency. - Abstract: In this paper, the two-dimensional (2D) neutron diffusion equation is analytically solved for two energy groups (2G). The spatial domain of reactor core is divided into a set of nodes with uniform nuclear parameters. To determine iteratively the multiplication factor and the neutron flux in the reactor we combine the analytical solution of the neutron diffusion equation with an iterative method known as power method. The analytical solution for different types of regions that compose the reactor is obtained, such as fuel and reflector regions. Four average fluxes in the node surfaces are used as boundary conditions for analytical solution. Discontinuity factors on the node surfaces derived from the homogenization process are applied to maintain averages reaction rates and the net current in the fuel assembly (FA). To validate the results obtained by the analytical solution a relative power density distribution in the FAs is determined from the neutron flux distribution and compared with the reference values. The results show good accuracy and efficiency.

Pancultural self-enhancement reloaded: a meta-analytic reply to Heine (2005).

Science.gov (United States)

Sedikides, Constantine; Gaertner, Lowell; Vevea, Jack L

2005-10-01

C. Sedikides, L. Gaertner, and Y. Toguchi (2003) reported findings favoring the universality of self-enhancement. S. J. Heine (2005) challenged the authors' research on evidential and logical grounds. In response, the authors carried out 2 meta-analytic investigations. The results backed the C. Sedikides et al. (2003) theory and findings. Both Westerners and Easterners self-enhanced tactically. Westerners self-enhanced on attributes relevant to the cultural ideal of individualism, whereas Easterners self-enhanced on attributes relevant to the cultural ideal of collectivism (in both cases, because of the personal importance of the ideal). Self-enhancement motivation is universal, although its manifestations are strategically sensitive to cultural context. The authors respond to other aspects of Heine's critique by discussing why researchers should empirically validate the comparison dimension (individualistic vs. collectivistic) and defending why the better-than-average effect is a valid measure of self-enhancement.

Post-analytical stability of 23 common chemistry and immunochemistry analytes in incurred samples

DEFF Research Database (Denmark)

Nielsen, Betina Klint; Frederiksen, Tina; Friis-Hansen, Lennart

2017-01-01

BACKGROUND: Storage of blood samples after centrifugation, decapping and initial sampling allows ordering of additional blood tests. The pre-analytic stability of biochemistry and immunochemistry analytes has been studied in detail, but little is known about the post-analytical stability...... in incurred samples. METHODS: We examined the stability of 23 routine analytes on the Dimension Vista® (Siemens Healthineers, Denmark): 42-60 routine samples in lithium-heparin gel tubes (Vacutainer, BD, USA) were centrifuged at 3000×g for 10min. Immediately after centrifugation, initial concentration...... of analytes were measured in duplicate (t=0). The tubes were stored decapped at room temperature and re-analyzed after 2, 4, 6, 8 and 10h in singletons. The concentration from reanalysis were normalized to initial concentration (t=0). Internal acceptance criteria for bias and total error were used...

Modification Of Carry-Blair Transport Media For Storage Salmonella typhi

Directory of Open Access Journals (Sweden)

Yati Supriatin

2016-09-01

Full Text Available The aim of this study was to determine transport media modification as alternative media to replace Carry Blair. One type of transport media that often use to carry faeces specimens suspected to contain Salmonella typhi is Carry-Blair media. Studies have been conducted experimentally by storing Salmonella typhi on alternative transport media with Peptone composition, disodium Phosphate, Sodium chloride, Calcium chloride, which is made using a semi-solid and Carry-Blair as a control. Three variety of storage was done (0 hour,6 hours,9 hours at a temperature 4⁰-8⁰C and then Salmonella typhi was inoculated in Salmonella Shigella Agar using spread plate technique incubated during 24 hours at 37⁰C, counted the number of colonies by the plate count method using the colony counter. The results of ANOVA could be concluded that modification media could be use as alternative media replace Carry-Blair at 6 hours. Based on regression correlation test was assumed that the Salmonella typhi bacteria still life at less than 11 hours 54 minutes.

Analytical solutions for coupling fractional partial differential equations with Dirichlet boundary conditions

Science.gov (United States)

Ding, Xiao-Li; Nieto, Juan J.

2017-11-01

In this paper, we consider the analytical solutions of coupling fractional partial differential equations (FPDEs) with Dirichlet boundary conditions on a finite domain. Firstly, the method of successive approximations is used to obtain the analytical solutions of coupling multi-term time fractional ordinary differential equations. Then, the technique of spectral representation of the fractional Laplacian operator is used to convert the coupling FPDEs to the coupling multi-term time fractional ordinary differential equations. By applying the obtained analytical solutions to the resulting multi-term time fractional ordinary differential equations, the desired analytical solutions of the coupling FPDEs are given. Our results are applied to derive the analytical solutions of some special cases to demonstrate their applicability.

Numerical resolution of the time-domain three-dimensional Maxwell equations by a conform finite element approximation. Part II: numerical results

International Nuclear Information System (INIS)

Heintze, E.

1993-01-01

The aim of this report is to validate the program MAX3D built up from the discretization of the formulation (FB) established in part 1. A qualitative and quantitative analysis is carried out on numerical results obtained with various test cases of which, for most of them, analytical solutions are known. 32 figs., 3 refs

Analytical study on discrete model of virtual cathode in a high-current diode

International Nuclear Information System (INIS)

Privezentsev, A.P.

1988-01-01

Interest in investigation of virtual cathode dynamics related to the development of high-current accelerator equipment is caused by the possibility of its application for ion collective acceleration in direct high-current electron beams and generation of power electromagnetic radiation. The Hamiltonian form of a plane sheet model for a high-current flux in a plane diode is investigated. Variables used permit to carry out the investigation of dynamics of the virtual cathode flux by the method of coordinate point transformations in a phase space. The necessity of numerical integration of sheet motion equations is dropped out in this case. Analytical solution of the suggested iterative circuit for total flux passage is presented as an example. The solution obtained is equivalent to the known results of the plane diode theory, obtained in the hydrodynamic approximation

Analytic Moufang-transformations

International Nuclear Information System (INIS)

Paal, Eh.N.

1988-01-01

The paper is aimed to be an introduction to the concept of an analytic birepresentation of an analytic Moufang loop. To describe the deviation of (S,T) from associativity, the associators (S,T) are defined and certain constraints for them, called the minimality conditions of (S,T) are established

Analytical solutions of the electrostatically actuated curled beam problem

KAUST Repository

Younis, Mohammad I.

2014-07-24

This works presents analytical expressions of the electrostatically actuated initially deformed cantilever beam problem. The formulation is based on the continuous Euler-Bernoulli beam model combined with a single-mode Galerkin approximation. We derive simple analytical expressions for two commonly observed deformed beams configurations: the curled and tilted configurations. The derived analytical formulas are validated by comparing their results to experimental data and numerical results of a multi-mode reduced order model. The derived expressions do not involve any complicated integrals or complex terms and can be conveniently used by designers for quick, yet accurate, estimations. The formulas are found to yield accurate results for most commonly encountered microbeams of initial tip deflections of few microns. For largely deformed beams, we found that these formulas yield less accurate results due to the limitations of the single-mode approximation. In such cases, multi-mode reduced order models are shown to yield accurate results. © 2014 Springer-Verlag Berlin Heidelberg.

Verification of thermal-irradiation stress analytical code VIENUS of graphite block

International Nuclear Information System (INIS)

Iyoku, Tatsuo; Ishihara, Masahiro; Shiozawa, Shusaku; Shirai, Hiroshi; Minato, Kazuo.

1992-02-01

The core graphite components of the High Temperature Engineering Test Reactor (HTTR) show both the dimensional change (irradiation shrinkage) and creep behavior due to fast neutron irradiation under the temperature and the fast neutron irradiation conditions of the HTTR. Therefore, thermal/irradiation stress analytical code, VIENUS, which treats these graphite irradiation behavior, is to be employed in order to design the core components such as fuel block etc. of the HTTR. The VIENUS is a two dimensional finite element viscoelastic stress analytical code to take account of changes in mechanical properties, thermal strain, irradiation-induced dimensional change and creep in the fast neutron irradiation environment. Verification analyses were carried out in order to prove the validity of this code based on the irradiation tests of the 8th OGL-1 fuel assembly and the fuel element of the Peach Bottom reactor. This report describes the outline of the VIENUS code and its verification analyses. (author)

Killing cancer cells by targeted drug-carrying phage nanomedicines

Directory of Open Access Journals (Sweden)

Yacoby Iftach

2008-04-01

Full Text Available Abstract Background Systemic administration of chemotherapeutic agents, in addition to its anti-tumor benefits, results in indiscriminate drug distribution and severe toxicity. This shortcoming may be overcome by targeted drug-carrying platforms that ferry the drug to the tumor site while limiting exposure to non-target tissues and organs. Results We present a new form of targeted anti-cancer therapy in the form of targeted drug-carrying phage nanoparticles. Our approach is based on genetically-modified and chemically manipulated filamentous bacteriophages. The genetic manipulation endows the phages with the ability to display a host-specificity-conferring ligand. The phages are loaded with a large payload of a cytotoxic drug by chemical conjugation. In the presented examples we used anti ErbB2 and anti ERGR antibodies as targeting moieties, the drug hygromycin conjugated to the phages by a covalent amide bond, or the drug doxorubicin conjugated to genetically-engineered cathepsin-B sites on the phage coat. We show that targeting of phage nanomedicines via specific antibodies to receptors on cancer cell membranes results in endocytosis, intracellular degradation, and drug release, resulting in growth inhibition of the target cells in vitro with a potentiation factor of >1000 over the corresponding free drugs. Conclusion The results of the proof-of concept study presented here reveal important features regarding the potential of filamentous phages to serve as drug-delivery platform, on the affect of drug solubility or hydrophobicity on the target specificity of the platform and on the effect of drug release mechanism on the potency of the platform. These results define targeted drug-carrying filamentous phage nanoparticles as a unique type of antibody-drug conjugates.

Killing cancer cells by targeted drug-carrying phage nanomedicines

Science.gov (United States)

Bar, Hagit; Yacoby, Iftach; Benhar, Itai

2008-01-01

Background Systemic administration of chemotherapeutic agents, in addition to its anti-tumor benefits, results in indiscriminate drug distribution and severe toxicity. This shortcoming may be overcome by targeted drug-carrying platforms that ferry the drug to the tumor site while limiting exposure to non-target tissues and organs. Results We present a new form of targeted anti-cancer therapy in the form of targeted drug-carrying phage nanoparticles. Our approach is based on genetically-modified and chemically manipulated filamentous bacteriophages. The genetic manipulation endows the phages with the ability to display a host-specificity-conferring ligand. The phages are loaded with a large payload of a cytotoxic drug by chemical conjugation. In the presented examples we used anti ErbB2 and anti ERGR antibodies as targeting moieties, the drug hygromycin conjugated to the phages by a covalent amide bond, or the drug doxorubicin conjugated to genetically-engineered cathepsin-B sites on the phage coat. We show that targeting of phage nanomedicines via specific antibodies to receptors on cancer cell membranes results in endocytosis, intracellular degradation, and drug release, resulting in growth inhibition of the target cells in vitro with a potentiation factor of >1000 over the corresponding free drugs. Conclusion The results of the proof-of concept study presented here reveal important features regarding the potential of filamentous phages to serve as drug-delivery platform, on the affect of drug solubility or hydrophobicity on the target specificity of the platform and on the effect of drug release mechanism on the potency of the platform. These results define targeted drug-carrying filamentous phage nanoparticles as a unique type of antibody-drug conjugates. PMID:18387177

Present status and future subjects of the analytical studies related with application of charged particles and RI to materials science and biotechnology

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-03-01

. It is important to make the analysis keeping close cooperation with the experiment. In order to utilize and develop a lot of practical outcomes which have been obtained experimentally up to now, first, the theoretical analysis group for radiation application extracts only the core element from the analysis of reactive process of charged particles in the materials and from the irradiation effect, and then constructs the simplified model. Second, the validity of the constructed model is verified by advancing the theoretical analysis based on the model, and the calculated result is fed back to the experiment, and then the verification is carried out. The data collection and the analysis in each analytical item will be conducted in fiscal 2003-4, and modeling will be carried out for possible ones. For the item in which modeling has been already finished, the theoretical analysis like the material structure and physical properties, etc. will be implemented. On the other hand, for the items like the material transfer in higher plants and the biological effects, etc. in which the analysis of experimental results leading to the basis for the theoretical treatment has just started modeling will be carried out in parallel with the experiment, and the simplified model will be constructed. In fiscal 2005-6, the analysis based on the simplified model will be advanced, and the elaboration of modeling will be carried out based on the result of the verification experiment. Finally, the general-purpose theorization will be conducted by generalizing and universalizing the obtained model concerning the specific system. The obtained outcomes will by applied to other systems, and, will consequently, contribute to the promotion of new technological development. (author)

An analytical solution for improved HIFU SAR estimation

International Nuclear Information System (INIS)

Dillon, C R; Vyas, U; Christensen, D A; Roemer, R B; Payne, A

2012-01-01

Accurate determination of the specific absorption rates (SARs) present during high intensity focused ultrasound (HIFU) experiments and treatments provides a solid physical basis for scientific comparison of results among HIFU studies and is necessary to validate and improve SAR predictive software, which will improve patient treatment planning, control and evaluation. This study develops and tests an analytical solution that significantly improves the accuracy of SAR values obtained from HIFU temperature data. SAR estimates are obtained by fitting the analytical temperature solution for a one-dimensional radial Gaussian heating pattern to the temperature versus time data following a step in applied power and evaluating the initial slope of the analytical solution. The analytical method is evaluated in multiple parametric simulations for which it consistently (except at high perfusions) yields maximum errors of less than 10% at the center of the focal zone compared with errors up to 90% and 55% for the commonly used linear method and an exponential method, respectively. For high perfusion, an extension of the analytical method estimates SAR with less than 10% error. The analytical method is validated experimentally by showing that the temperature elevations predicted using the analytical method's SAR values determined for the entire 3D focal region agree well with the experimental temperature elevations in a HIFU-heated tissue-mimicking phantom. (paper)

Research on trace elements in biomedicine carried out in Italy using nuclear accelerators

International Nuclear Information System (INIS)

Moro, R.

1985-01-01

The present status and perspectives of research on trace elements in biomedicine carried out at Catania, Milan, Naples and Padua-Legnaro are discussed. In these researches, nuclear techniques such as Proton Induced X-ray Emission (PIXE), Proton Nuclear Activation (PNA) and Prompt Radiation Analysis (PRA), involving the use of small accelerators, are employed as analytical methods. Different field of application such as dentistry, bone disease, pediatrics and oncology are covered by these activities. The PIXE method is employed for the analysis of serum, hair and bone. In particular, elements like zinc and selenium which play an important role in infancy and oncology, respectively, have been extensively studied. The proton activation method has been applied to investigate the ferrokinetics in plasma. The prompt radiation analysis of the reaction /sup 19/F(p,α) has been used for the determination of the fluorine depth distribution in dental enamel

Analytical Model for Fictitious Crack Propagation in Concrete Beams

DEFF Research Database (Denmark)

Ulfkjær, J. P.; Krenk, S.; Brincker, Rune

An analytical model for load-displacement curves of unreinforced notched and un-notched concrete beams is presented. The load displacement-curve is obtained by combining two simple models. The fracture is modelled by a fictitious crack in an elastic layer around the mid-section of the beam. Outside...... the elastic layer the deformations are modelled by the Timoshenko beam theory. The state of stress in the elastic layer is assumed to depend bi-lineary on local elongation corresponding to a linear softening relation for the fictitious crack. For different beam size results from the analytical model...... is compared with results from a more accurate model based on numerical methods. The analytical model is shown to be in good agreement with the numerical results if the thickness of the elastic layer is taken as half the beam depth. Several general results are obtained. It is shown that the point on the load...

Analytical basis for neutron-activation analysis measuring nuclides with a half-life of second order

International Nuclear Information System (INIS)

Yonezawa, Chushiro; Ichimura, Shigeju; Matsue, Hideaki; Kurosawa, Tatsuya

1998-01-01

An analytical basis for a neutron-activation analysis (NAA) for measuring nuclides of second-order half-lives produced by the (n, γ) reaction has been studied using a neutron-activation analysis facility (PN-3) of JRR-3M. The NAA facility, comprising a fast pneumatic irradiation system and a high count-rate gamma-ray spectrometer, is able to automatically conduct NAA with short-lived nuclides. Basic experimental conditions, such as a high count-rate gamma-ray measurement, the effects of irradiation-capsule material and the stability of the neutron flux, were examined. The analytical sensitivities and detection limits for 20 elements of which activated radionuclide having half-lives from 0.7 to 100 s were obtained. Scandium, In, Dy and Hf were elements having the highest analytical sensitivity, with detection limits down to 4.2 to 14 ng. Fluorine, which is difficult to determine by other methods, can be detected at above 530 ng. Analytical applications of NAA with short-lived nuclides have been carried out for F, Se, Sc, Hf, In and Dy in various materials, including reference materials. The accuracy, precision and detection limits of NAA with short-lived nuclides have been evaluated. (author)

Parallelization of Reversible Ripple-carry Adders

DEFF Research Database (Denmark)

Thomsen, Michael Kirkedal; Axelsen, Holger Bock

2009-01-01

The design of fast arithmetic logic circuits is an important research topic for reversible and quantum computing. A special challenge in this setting is the computation of standard arithmetical functions without the generation of \\emph{garbage}. Here, we present a novel parallelization scheme...... wherein $m$ parallel $k$-bit reversible ripple-carry adders are combined to form a reversible $mk$-bit \\emph{ripple-block carry adder} with logic depth $\\mathcal{O}(m+k)$ for a \\emph{minimal} logic depth $\\mathcal{O}(\\sqrt{mk})$, thus improving on the $mk$-bit ripple-carry adder logic depth $\\mathcal...

Single-analyte to multianalyte fluorescence sensors

Science.gov (United States)

Lavigne, John J.; Metzger, Axel; Niikura, Kenichi; Cabell, Larry A.; Savoy, Steven M.; Yoo, J. S.; McDevitt, John T.; Neikirk, Dean P.; Shear, Jason B.; Anslyn, Eric V.

1999-05-01

The rational design of small molecules for the selective complexation of analytes has reached a level of sophistication such that there exists a high degree of prediction. An effective strategy for transforming these hosts into sensors involves covalently attaching a fluorophore to the receptor which displays some fluorescence modulation when analyte is bound. Competition methods, such as those used with antibodies, are also amenable to these synthetic receptors, yet there are few examples. In our laboratories, the use of common dyes in competition assays with small molecules has proven very effective. For example, an assay for citrate in beverages and an assay for the secondary messenger IP3 in cells have been developed. Another approach we have explored focuses on multi-analyte sensor arrays with attempt to mimic the mammalian sense of taste. Our system utilizes polymer resin beads with the desired sensors covalently attached. These functionalized microspheres are then immobilized into micromachined wells on a silicon chip thereby creating our taste buds. Exposure of the resin to analyte causes a change in the transmittance of the bead. This change can be fluorescent or colorimetric. Optical interrogation of the microspheres, by illuminating from one side of the wafer and collecting the signal on the other, results in an image. These data streams are collected using a CCD camera which creates red, green and blue (RGB) patterns that are distinct and reproducible for their environments. Analysis of this data can identify and quantify the analytes present.

Quo vadis, analytical chemistry?

Science.gov (United States)

Valcárcel, Miguel

2016-01-01

This paper presents an open, personal, fresh approach to the future of Analytical Chemistry in the context of the deep changes Science and Technology are anticipated to experience. Its main aim is to challenge young analytical chemists because the future of our scientific discipline is in their hands. A description of not completely accurate overall conceptions of our discipline, both past and present, to be avoided is followed by a flexible, integral definition of Analytical Chemistry and its cornerstones (viz., aims and objectives, quality trade-offs, the third basic analytical reference, the information hierarchy, social responsibility, independent research, transfer of knowledge and technology, interfaces to other scientific-technical disciplines, and well-oriented education). Obsolete paradigms, and more accurate general and specific that can be expected to provide the framework for our discipline in the coming years are described. Finally, the three possible responses of analytical chemists to the proposed changes in our discipline are discussed.

Double-contained receiver tank 244-TX, grab samples, 244TX-97-1 through 244TX-97-3 analytical results for the final report

International Nuclear Information System (INIS)

Esch, R.A.

1997-01-01

This document is the final report for the double-contained receiver tank (DCRT) 244-TX grab samples. Three grabs samples were collected from riser 8 on May 29, 1997. Analyses were performed in accordance with the Compatibility Grab Sampling and Analysis Plan (TSAP) and the Data Quality Objectives for Tank Farms Waste Compatibility Program (DQO). The analytical results are presented in a table

Four-parameter analytical local model potential for atoms

International Nuclear Information System (INIS)

Fei, Yu; Jiu-Xun, Sun; Rong-Gang, Tian; Wei, Yang

2009-01-01

Analytical local model potential for modeling the interaction in an atom reduces the computational effort in electronic structure calculations significantly. A new four-parameter analytical local model potential is proposed for atoms Li through Lr, and the values of four parameters are shell-independent and obtained by fitting the results of X a method. At the same time, the energy eigenvalues, the radial wave functions and the total energies of electrons are obtained by solving the radial Schrödinger equation with a new form of potential function by Numerov's numerical method. The results show that our new form of potential function is suitable for high, medium and low Z atoms. A comparison among the new potential function and other analytical potential functions shows the greater flexibility and greater accuracy of the present new potential function. (atomic and molecular physics)

MERRA Analytic Services

Science.gov (United States)

Schnase, J. L.; Duffy, D. Q.; McInerney, M. A.; Tamkin, G. S.; Thompson, J. H.; Gill, R.; Grieg, C. M.

2012-12-01

MERRA Analytic Services (MERRA/AS) is a cyberinfrastructure resource for developing and evaluating a new generation of climate data analysis capabilities. MERRA/AS supports OBS4MIP activities by reducing the time spent in the preparation of Modern Era Retrospective-Analysis for Research and Applications (MERRA) data used in data-model intercomparison. It also provides a testbed for experimental development of high-performance analytics. MERRA/AS is a cloud-based service built around the Virtual Climate Data Server (vCDS) technology that is currently used by the NASA Center for Climate Simulation (NCCS) to deliver Intergovernmental Panel on Climate Change (IPCC) data to the Earth System Grid Federation (ESGF). Crucial to its effectiveness, MERRA/AS's servers will use a workflow-generated realizable object capability to perform analyses over the MERRA data using the MapReduce approach to parallel storage-based computation. The results produced by these operations will be stored by the vCDS, which will also be able to host code sets for those who wish to explore the use of MapReduce for more advanced analytics. While the work described here will focus on the MERRA collection, these technologies can be used to publish other reanalysis, observational, and ancillary OBS4MIP data to ESGF and, importantly, offer an architectural approach to climate data services that can be generalized to applications and customers beyond the traditional climate research community. In this presentation, we describe our approach, experiences, lessons learned,and plans for the future.; (A) MERRA/AS software stack. (B) Example MERRA/AS interfaces.

An analytical and experimental approach for pressure distribution analysis of a particular lobe and plain bearing performance keeping in view of all impeding varying parameters associating with fixed lubrication SAE20W40

International Nuclear Information System (INIS)

Biswas, Nabarun; Chakraborti, Prasun; Belkar, Sanjay

2016-01-01

This paper presents both analytical and experimental pressure analysis approach of a typical Lobe and plain bearing for determining effective performance of the bearing. This is found to be dependent on several variables viz. angular velocity (1200-1900 rpm), load (300- 750 N) and pressure angle (0.deg.-180.deg.). This study in particular has been carried out for better rectifications and comparative prediction of lobe and plain bearing in terms of pressure distribution behavior under lubrication oil grade of SAE20W40. Influencing parameters were varied in this set up only to get optimum parametric combination considering all relevant practical issues. The experimentation was done based on significant directives of relevant literatures in these sectors. Attempt was made to compare the analytical findings with experimental results and found matched appreciably. After that attention was diverted to find the nature of pressure and load carrying capacity at various fluctuating speed and load with a fixed lubrication of SAE20W40 for appropriate decision making towards its characteristic performance. The analytical data generated by MATLAB are compared with experimental data which is generated by JBTR

An analytical and experimental approach for pressure distribution analysis of a particular lobe and plain bearing performance keeping in view of all impeding varying parameters associating with fixed lubrication SAE20W40

Energy Technology Data Exchange (ETDEWEB)

Biswas, Nabarun; Chakraborti, Prasun [National Institute of Technology Agartala, Jirania (India); Belkar, Sanjay [Pravara Rural Engineering CollegeLoni, Rahata taluka (India)

2016-05-15

This paper presents both analytical and experimental pressure analysis approach of a typical Lobe and plain bearing for determining effective performance of the bearing. This is found to be dependent on several variables viz. angular velocity (1200-1900 rpm), load (300- 750 N) and pressure angle (0.deg.-180.deg.). This study in particular has been carried out for better rectifications and comparative prediction of lobe and plain bearing in terms of pressure distribution behavior under lubrication oil grade of SAE20W40. Influencing parameters were varied in this set up only to get optimum parametric combination considering all relevant practical issues. The experimentation was done based on significant directives of relevant literatures in these sectors. Attempt was made to compare the analytical findings with experimental results and found matched appreciably. After that attention was diverted to find the nature of pressure and load carrying capacity at various fluctuating speed and load with a fixed lubrication of SAE20W40 for appropriate decision making towards its characteristic performance. The analytical data generated by MATLAB are compared with experimental data which is generated by JBTR.

Modern Strategies of Modelling Informational and Analytical Support of Inclusive Higher Education in Russia

Directory of Open Access Journals (Sweden)

Karpushkina N.V.

2017-08-01

Full Text Available The paper gives a description of modern approaches to the modelling of informational and analytical support of higher education in persons with disabilities. It proposes a model of such support depending on the type of disability and provides a detailed description of structure components of informational and analytical support. It is argued that the main areas of support of individuals with disabilities are the following: adaptational and orientating (pre-university; organizational and coordinative; psychological and educational; academic; sociocultural; medical and health-improving; vocational (postgraduate etc. Each area is comprehensively defined. The paper reveals the principles underlying the modelling of informational and analytical support of higher inclusive education, such as: the principle of expanding and shaping a tolerant ‘barrier-free’ environment; the principle of subjectivity and socialization; the principle of strong motivation and activity; the principle of dialogue; the principle of variation; and, finally, the principle of informational openness. This work was carried out with the support of the Government Contract of the Ministry of Education and Science of the Russian Federation (project 2016- 01.04- 05- 020 – F- 35.001 “Monitoring and Informational/Analytical Support of Regional Resource Centers for Higher Education for the Disabled”.

Analytic approaches to atomic response properties

International Nuclear Information System (INIS)

Lamm, E.E.

1980-01-01

Many important response properties, e.g., multipole polarizabilites and sum rules, photodetachment cross sections, and closely-related long-range dispersion force coefficients, are insensitive to details of electronic structure. In this investigation, analytic asymptotic theories of atomic response properties are constructed that yield results as accurate as those obtained by more elaborate numerical methods. In the first chapter, a novel and simple method is used to determined the multipole sum rules S/sub l/(-k), for positive and negative values of k, of the hydrogen atom and the hydrogen negative ion in the asymptotic approximation. In the second chapter, an analytically-tractable extended asymptotic model for the response properites of weakly-bound anions is proposed and the multipole polarizability, multipole sum rules, and photodetachment cross section determined by the model are computed analytically. Dipole polarizabilities and photodetachment cross sections determined from the model for Li-, Na-, and K- are compared with the numercal results of Moores and Norcross. Agreement is typically within 15% if the pseudopotential is included. In the third chapter a comprehensive and unified treatment of atomic multipole oscillator strengths, dynamic multipole polarizabilites, and dispersion force constants in a variety of Coulomb-like approximations is presented. A theoretically and computationally superior modification of the original Bates-Damgaard (BD) procedure, referred to here as simply the Coulomb approximation (CA), is introduced. An analytic expression for the dynamic multipole polarizability is found which contains as special cases this quantity within the CA, the extended Coulomb approximation (ECA) of Adelman and Szabo, and the quantum defect orbital (QDO) method of Simons

Smart city analytics

DEFF Research Database (Denmark)

Hansen, Casper; Hansen, Christian; Alstrup, Stephen

2017-01-01

We present an ensemble learning method that predicts large increases in the hours of home care received by citizens. The method is supervised, and uses different ensembles of either linear (logistic regression) or non-linear (random forests) classifiers. Experiments with data available from 2013 ...... is very useful when full records are not accessible or available. Smart city analytics does not necessarily require full city records. To our knowledge this preliminary study is the first to predict large increases in home care for smart city analytics.......We present an ensemble learning method that predicts large increases in the hours of home care received by citizens. The method is supervised, and uses different ensembles of either linear (logistic regression) or non-linear (random forests) classifiers. Experiments with data available from 2013...... to 2017 for every citizen in Copenhagen receiving home care (27,775 citizens) show that prediction can achieve state of the art performance as reported in similar health related domains (AUC=0.715). We further find that competitive results can be obtained by using limited information for training, which...

Preparation of standard hair material and development of analytical methodology

International Nuclear Information System (INIS)

Gangadharan, S.; Ganapathi Iyer, S.; Ali, M.M.; Thantry, S.S.; Verma, R.; Arunachalam, J.; Walvekar, A.P.

1992-01-01

In 1976 Indian Researchers suggested the possible use of hair as an indicator of environmental exposure and established through a study of country wide student population and general population of the metropolitan city of Bombay that human scalp hair could indeed be an effective first level monitor in a scheme of multilevel monitoring of environmental exposure to inorganic pollutants. It was in this context and in view of the ready availability of large quantities of scalp hair subjected to minimum treatment by chemicals that they proposed to participate in the preparation of a standard material of hair. It was also recognized that measurements of trace element concentrations at very low levels require cross-validation by different analytical techniques, even within the same laboratory. The programme of work that has been carried out since the first meeting of the CRP had been aimed at these two objectives. These objectives include the preparation of standard material of hair and the development of analytical methodologies for determination of elements and species of interest. 1 refs., 3 tabs

Neutron activation spectrometry and neutron activation analysis in analytical geochemistry

International Nuclear Information System (INIS)

Dulski, P.; Moeller, P.

1975-07-01

The present report is to show the geochemists who are interested in neutron activation spectrometry (NAS) and neutron activation analysis (NAA) which analytical possibilities these methods offer him. As a review of these analytical possibilities, a lieterature compolation is given which is subdivided into two groups: 1) rock (basic, intermediary, acid, sediments, soils and nuds, diverse minerals, tectites, meteorites and lunar material). 2) ore (Al, Au, Be, Cr, Cu, Mn, Mo, Fe, Pb, Pt, Sn, Ti, W, Zn, Zr, U and phosphate ore, polymetallic ores, fluorite, monazite and diverse ores). The applied methods as well as the determinable elements in the given materials can be got from the tables. On the whole, the literature evaluation carried out makes it clear that neutron activation spectrometry is a very useful multi-element method for the analysis of rocks. The analysis of ores, however, is subjected to great limitations. As rock analysis is very frequently of importance in prospecting for ore deposits, the NAS proves to be extremely useful for this very field of application. (orig./LH) [de

Optimization of instrumental neutron activation analysis method by means of 2{sup k} experimental design technique aiming the validation of analytical procedures

Energy Technology Data Exchange (ETDEWEB)

Petroni, Robson; Moreira, Edson G., E-mail: rpetroni@ipen.br, E-mail: emoreira@ipen.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

2013-07-01

In this study optimization of procedures and standardization of Instrumental Neutron Activation Analysis (INAA) methods were carried out for the determination of the elements arsenic, chromium, cobalt, iron, rubidium, scandium, selenium and zinc in biological materials. The aim is to validate the analytical methods for future accreditation at the National Institute of Metrology, Quality and Technology (INMETRO). The 2{sup k} experimental design was applied for evaluation of the individual contribution of selected variables of the analytical procedure in the final mass fraction result. Samples of Mussel Tissue Certified Reference Material and multi-element standards were analyzed considering the following variables: sample decay time, counting time and sample distance to detector. The standard multi-element concentration (comparator standard), mass of the sample and irradiation time were maintained constant in this procedure. By means of the statistical analysis and theoretical and experimental considerations it was determined the optimized experimental conditions for the analytical methods that will be adopted for the validation procedure of INAA methods in the Neutron Activation Analysis Laboratory (LAN) of the Research Reactor Center (CRPq) at the Nuclear and Energy Research Institute (IPEN - CNEN/SP). Optimized conditions were estimated based on the results of z-score tests, main effect and interaction effects. The results obtained with the different experimental configurations were evaluated for accuracy (precision and trueness) for each measurement. (author)

Exact analytical solutions of continuity equation for electron beams precipitating in Coulomb collisions

Energy Technology Data Exchange (ETDEWEB)

Dobranskis, R. R.; Zharkova, V. V., E-mail: valentina.zharkova@northumbria.ac.uk [Department of Mathematics and Information Sciences, University of Northumbria, Newcastle upon Tyne NE1 2XP (United Kingdom)

2014-06-10

The original continuity equation (CE) used for the interpretation of the power law energy spectra of beam electrons in flares was written and solved for an electron beam flux while ignoring an additional free term with an electron density. In order to remedy this omission, the original CE for electron flux, considering beam's energy losses in Coulomb collisions, was first differentiated by the two independent variables: depth and energy leading to partial differential equation for an electron beam density instead of flux with the additional free term. The analytical solution of this partial differential continuity equation (PDCE) is obtained by using the method of characteristics. This solution is further used to derive analytical expressions for mean electron spectra for Coulomb collisions and to carry out numeric calculations of hard X-ray (HXR) photon spectra for beams with different parameters. The solutions revealed a significant departure of electron densities at lower energies from the original results derived from the CE for the flux obtained for Coulomb collisions. This departure is caused by the additional exponential term that appeared in the updated solutions for electron differential density leading to its faster decrease at lower energies (below 100 keV) with every precipitation depth similar to the results obtained with numerical Fokker-Planck solutions. The effects of these updated solutions for electron densities on mean electron spectra and HXR photon spectra are also discussed.

On the analyticity of Laguerre series

International Nuclear Information System (INIS)

Weniger, Ernst Joachim

2008-01-01

The transformation of a Laguerre series f(z) = Σ ∞ n=0 λ (α) n L (α) n (z) to a power series f(z) = Σ ∞ n=0 γ n z n is discussed. Since many nonanalytic functions can be expanded in terms of generalized Laguerre polynomials, success is not guaranteed and such a transformation can easily lead to a mathematically meaningless expansion containing power series coefficients that are infinite in magnitude. Simple sufficient conditions based on the decay rates and sign patterns of the Laguerre series coefficients λ (α) n as n → ∞ can be formulated which guarantee that the resulting power series represents an analytic function. The transformation produces a mathematically meaningful result if the coefficients λ (α) n either decay exponentially or factorially as n → ∞. The situation is much more complicated-but also much more interesting-if the λ (α) n decay only algebraically as n → ∞. If the λ (α) n ultimately have the same sign, the series expansions for the power series coefficients diverge, and the corresponding function is not analytic at the origin. If the λ (α) n ultimately have strictly alternating signs, the series expansions for the power series coefficients still diverge, but are summable to something finite, and the resulting power series represents an analytic function. If algebraically decaying and ultimately alternating Laguerre series coefficients λ (α) n possess sufficiently simple explicit analytical expressions, the summation of the divergent series for the power series coefficients can often be accomplished with the help of analytic continuation formulae for hypergeometric series p+1 F p , but if the λ (α) n have a complicated structure or if only their numerical values are available, numerical summation techniques have to be employed. It is shown that certain nonlinear sequence transformations-in particular the so-called delta transformation (Weniger 1989 Comput. Phys. Rep. 10 189-371 (equation (8.4-4)))-are able to

Effect of Gamma Radiation on Amino Acid Based Vesicle Carrying Radiosensitizer

International Nuclear Information System (INIS)

Nur Ratasha Alia Mohd Rosli; Faizal Mohamed; Muhammad Amir Syafiq Mohd Sah; Irman Abdul Rahman

2014-01-01

Vesicles has been developed and studied to be used as a medium to transport radiosensitizer in treating cancer cells by increasing its sensitivity effectively towards the radiation given during radiotherapy. This study was conducted to investigate the effect of gamma radiation on amino acid-based vesicle carrying radiosensitizer. Amino acid based vesicles carrying radiosensitizer were synthesized using sonication method with sodium N-lauroylsarcosinate hydrate and decanol being the primary surfactant, while hydrogen peroxide and sodium hyaluronate as the encapsulated radiosensitizer. The synthesized vesicle was then irradiated at radiation doses equivalent to those given during radiotherapy. Irradiated vesicle carrying radiosensitizer were then characterized using Transmission Electron Microscopy (TEM), Fourier Transform Infrared Spectroscopy (FTIR) and Polarized Light Microscope. Results obtained shows that there were no significant changes in morphology and molecular conformation of the synthesized vesicle after irradiation. Even at higher radiation dose of 100 Gray and 200 Gray, the results remained unchanged. This indicates that the synthesized vesicle carrying radiosensitizer is morphologically and spectroscopically stable even at high radiation doses. (author)

Analytical methods of heat transfer compared with numerical methods as related to nuclear waste repositories

International Nuclear Information System (INIS)

Estrada-Gasca, C.A.

1986-01-01

Analytical methods were applied to the prediction of the far-field thermal impact of a nuclear waste repository. Specifically, the transformation of coordinates and the Kirchhoff transformation were used to solve one-dimensional nonlinear heat conduction problems. Calculations for the HLW and TRU nuclear waste with initial areal thermal loadings of 12 kW/acre and 0.7 kW/acre, respectively, are carried out for various models. Also, finite difference and finite element methods are applied. The last method is used to solve two-dimensional linear and nonlinear heat conduction problems. Results of the analysis are temperature distributions and temperature histories. Explicit analytical expressions of the maximum temperature rise as a function of the system parameters are presented. The theoretical approaches predict maximum temperature increases in the overburden with an error of 10%. When the finite solid one-dimensional NWR thermal problem is solved with generic salt and HLW thermal load as parameters, the maximum temperature rises predicted by the finite difference and finite element methods had maximum errors of 2.6 and 6.7%, respectively. In all the other cases the finite difference method also gave a smaller error than the finite element method

On the analytical evaluation of the partition function for unit hypercubes in four dimensions

International Nuclear Information System (INIS)

Hari Dass, N.D.

1984-10-01

The group integrations required for the analytic evaluation of the partition function for unit hypercubes in four dimensions are carried out. Modifications of the graphical rules for SU 2 group integrations cited in the literature are developed for this purpose. A complete classification of all surfaces that can be embedded in the unit hypercube is given and their individual contribution to the partition function worked out. Applications are discussed briefly. (orig.)

Sensitivity of the speed evaluation tests of carrying the ball in youth soccer players

Directory of Open Access Journals (Sweden)

Rakojević Bojan

2016-01-01

Full Text Available This research is aimed at examining sensitivity of the speed evaluation tests while carrying the ball. The research included 76 male examinees, aged 17 years (+/- 6 months, who were divided into two qualitatively different subgroups. For determining the speed while carrying the ball, the tests of M type of carrying the ball between cones and slalom ball carrying with a pass were performed. The obtained results proved that the examinees from the group of more successful soccer players (Group 1 scored better on the applied tests when compared to the results of the group consisting of the soccer players from lower ranked clubs and who are not national team members (Group 2. High values of the result homogeneity in the two groups (for the Groups 1 and 2 it was 75% and 68.75% respectively lead to the conclusion that this ability is essential characteristics of young soccer players. The coefficient of discrimination of 0.269 for the results of M type test and 0.197 for the results of the test of carrying the ball with a pass indicate that the results of the two tests provide possibility to qualitatively distinguish youth players. Therefore, it can be concluded that as a technical element, carrying the ball significantly affects the quality of players' performance.

Analytical model for screening potential CO2 repositories

Science.gov (United States)

Okwen, R.T.; Stewart, M.T.; Cunningham, J.A.

2011-01-01

Assessing potential repositories for geologic sequestration of carbon dioxide using numerical models can be complicated, costly, and time-consuming, especially when faced with the challenge of selecting a repository from a multitude of potential repositories. This paper presents a set of simple analytical equations (model), based on the work of previous researchers, that could be used to evaluate the suitability of candidate repositories for subsurface sequestration of carbon dioxide. We considered the injection of carbon dioxide at a constant rate into a confined saline aquifer via a fully perforated vertical injection well. The validity of the analytical model was assessed via comparison with the TOUGH2 numerical model. The metrics used in comparing the two models include (1) spatial variations in formation pressure and (2) vertically integrated brine saturation profile. The analytical model and TOUGH2 show excellent agreement in their results when similar input conditions and assumptions are applied in both. The analytical model neglects capillary pressure and the pressure dependence of fluid properties. However, simulations in TOUGH2 indicate that little error is introduced by these simplifications. Sensitivity studies indicate that the agreement between the analytical model and TOUGH2 depends strongly on (1) the residual brine saturation, (2) the difference in density between carbon dioxide and resident brine (buoyancy), and (3) the relationship between relative permeability and brine saturation. The results achieved suggest that the analytical model is valid when the relationship between relative permeability and brine saturation is linear or quasi-linear and when the irreducible saturation of brine is zero or very small. ?? 2011 Springer Science+Business Media B.V.

Consumerism and the Sister Carrie's American Dream

Institute of Scientific and Technical Information of China (English)

卢亚丽

2017-01-01

From the aspect of consumerism to this text analyze Sister Carrie's"American dream"destruction. The author wholly and deeply analyzes the embodiment of consumerism in Dreiser's Sister Carrie and Dreiser's outlook and values under the effect of consumerism. To prove that the reason for destruction of Carrie's American dream is consumerism.

Improvement of spatial discretization error on the semi-analytic nodal method using the scattered source subtraction method

International Nuclear Information System (INIS)

Yamamoto, Akio; Tatsumi, Masahiro

2006-01-01

In this paper, the scattered source subtraction (SSS) method is newly proposed to improve the spatial discretization error of the semi-analytic nodal method with the flat-source approximation. In the SSS method, the scattered source is subtracted from both side of the diffusion or the transport equation to make spatial variation of the source term to be small. The same neutron balance equation is still used in the SSS method. Since the SSS method just modifies coefficients of node coupling equations (those used in evaluation for the response of partial currents), its implementation is easy. Validity of the present method is verified through test calculations that are carried out in PWR multi-assemblies configurations. The calculation results show that the SSS method can significantly improve the spatial discretization error. Since the SSS method does not have any negative impact on execution time, convergence behavior and memory requirement, it will be useful to reduce the spatial discretization error of the semi-analytic nodal method with the flat-source approximation. (author)

Limitless Analytic Elements

Science.gov (United States)

Strack, O. D. L.

2018-02-01

We present equations for new limitless analytic line elements. These elements possess a virtually unlimited number of degrees of freedom. We apply these new limitless analytic elements to head-specified boundaries and to problems with inhomogeneities in hydraulic conductivity. Applications of these new analytic elements to practical problems involving head-specified boundaries require the solution of a very large number of equations. To make the new elements useful in practice, an efficient iterative scheme is required. We present an improved version of the scheme presented by Bandilla et al. (2007), based on the application of Cauchy integrals. The limitless analytic elements are useful when modeling strings of elements, rivers for example, where local conditions are difficult to model, e.g., when a well is close to a river. The solution of such problems is facilitated by increasing the order of the elements to obtain a good solution. This makes it unnecessary to resort to dividing the element in question into many smaller elements to obtain a satisfactory solution.

Statistically qualified neuro-analytic failure detection method and system

Science.gov (United States)

Vilim, Richard B.; Garcia, Humberto E.; Chen, Frederick W.

2002-03-02

An apparatus and method for monitoring a process involve development and application of a statistically qualified neuro-analytic (SQNA) model to accurately and reliably identify process change. The development of the SQNA model is accomplished in two stages: deterministic model adaption and stochastic model modification of the deterministic model adaptation. Deterministic model adaption involves formulating an analytic model of the process representing known process characteristics, augmenting the analytic model with a neural network that captures unknown process characteristics, and training the resulting neuro-analytic model by adjusting the neural network weights according to a unique scaled equation error minimization technique. Stochastic model modification involves qualifying any remaining uncertainty in the trained neuro-analytic model by formulating a likelihood function, given an error propagation equation, for computing the probability that the neuro-analytic model generates measured process output. Preferably, the developed SQNA model is validated using known sequential probability ratio tests and applied to the process as an on-line monitoring system. Illustrative of the method and apparatus, the method is applied to a peristaltic pump system.

On-chip bio-analyte detection utilizing the velocity of magnetic microparticles in a fluid

KAUST Repository

Giouroudi, Ioanna

2011-03-22

A biosensing principle utilizing the motion of suspended magnetic microparticles in a microfluidic system is presented. The system utilizes the innovative concept of the velocity dependence of magnetic microparticles (MPs) due to their volumetric change when analyte is attached to their surface via antibody–antigen binding. When the magnetic microparticles are attracted by a magnetic field within a microfluidic channel their velocity depends on the presence of analyte. Specifically, their velocity decreases drastically when the magnetic microparticles are covered by (nonmagnetic) analyte (LMPs) due to the increased drag force in the opposite direction to that of the magnetic force. Experiments were carried out as a proof of concept. A promising 52% decrease in the velocity of the LMPs in comparison to that of the MPs was measured when both of them were accelerated inside a microfluidic channel using an external permanent magnet. The presented biosensing methodology offers a compact and integrated solution for a new kind of on-chip analysis with potentially high sensitivity and shorter acquisition time than conventional laboratory based systems.

Analytical evaluation of atomic form factors: Application to Rayleigh scattering

Energy Technology Data Exchange (ETDEWEB)

Safari, L., E-mail: laleh.safari@ist.ac.at [IST Austria (Institute of Science and Technology Austria), Am Campus 1, 3400 Klosterneuburg (Austria); Department of Physics, University of Oulu, Box 3000, FI-90014 Oulu (Finland); Santos, J. P. [Laboratório de Instrumentação, Engenharia Biomédica e Física da Radiação (LIBPhys-UNL), Departamento de Física, Faculdade de Ciências e Tecnologia, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Amaro, P. [Laboratório de Instrumentação, Engenharia Biomédica e Física da Radiação (LIBPhys-UNL), Departamento de Física, Faculdade de Ciências e Tecnologia, FCT, Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Physikalisches Institut, Universität Heidelberg, D-69120 Heidelberg (Germany); Jänkälä, K. [Department of Physics, University of Oulu, Box 3000, FI-90014 Oulu (Finland); Fratini, F. [Department of Physics, University of Oulu, Box 3000, FI-90014 Oulu (Finland); Institute of Atomic and Subatomic Physics, TU Wien, Stadionallee 2, 1020 Wien (Austria); Departamento de Física, Instituto de Ciências Exatas, Universidade Federal de Minas Gerais, 31270-901 Belo Horizonte, MG (Brazil)

2015-05-15

Atomic form factors are widely used for the characterization of targets and specimens, from crystallography to biology. By using recent mathematical results, here we derive an analytical expression for the atomic form factor within the independent particle model constructed from nonrelativistic screened hydrogenic wave functions. The range of validity of this analytical expression is checked by comparing the analytically obtained form factors with the ones obtained within the Hartee-Fock method. As an example, we apply our analytical expression for the atomic form factor to evaluate the differential cross section for Rayleigh scattering off neutral atoms.

Analytical methods for heat transfer and fluid flow problems

CERN Document Server

Weigand, Bernhard

2015-01-01

This book describes useful analytical methods by applying them to real-world problems rather than solving the usual over-simplified classroom problems. The book demonstrates the applicability of analytical methods even for complex problems and guides the reader to a more intuitive understanding of approaches and solutions. Although the solution of Partial Differential Equations by numerical methods is the standard practice in industries, analytical methods are still important for the critical assessment of results derived from advanced computer simulations and the improvement of the underlying numerical techniques. Literature devoted to analytical methods, however, often focuses on theoretical and mathematical aspects and is therefore useless to most engineers. Analytical Methods for Heat Transfer and Fluid Flow Problems addresses engineers and engineering students. The second edition has been updated, the chapters on non-linear problems and on axial heat conduction problems were extended. And worked out exam...

Learning Analytics: drivers, developments and challenges

Directory of Open Access Journals (Sweden)

Rebecca Ferguson

2014-12-01

Full Text Available Learning analytics is a significant area of Technology-Enhanced Learning (TEL that has emerged during the last decade. This review of the field begins with an examination of the technological, educational and political factors that have driven the development of analytics in educational settings. It goes on to chart the emergence of learning analytics, including their origins in the 20th century, the development of data-driven analytics, the rise of learning-focused perspectives and the influence of national economic concerns. It next focuses on the relationships between learning analytics, educational data mining and academic analytics. Finally, it examines developing areas of learning analytics research, and identifies a series of future challenges.

Analytical mass spectrometry

Energy Technology Data Exchange (ETDEWEB)

1990-01-01

This 43rd Annual Summer Symposium on Analytical Chemistry was held July 24--27, 1990 at Oak Ridge, TN and contained sessions on the following topics: Fundamentals of Analytical Mass Spectrometry (MS), MS in the National Laboratories, Lasers and Fourier Transform Methods, Future of MS, New Ionization and LC/MS Methods, and an extra session. (WET)

Analytical quadrics

CERN Document Server

Spain, Barry; Ulam, S; Stark, M

1960-01-01

Analytical Quadrics focuses on the analytical geometry of three dimensions. The book first discusses the theory of the plane, sphere, cone, cylinder, straight line, and central quadrics in their standard forms. The idea of the plane at infinity is introduced through the homogenous Cartesian coordinates and applied to the nature of the intersection of three planes and to the circular sections of quadrics. The text also focuses on paraboloid, including polar properties, center of a section, axes of plane section, and generators of hyperbolic paraboloid. The book also touches on homogenous coordi

Data mining and business analytics with R

CERN Document Server

Ledolter, Johannes

2013-01-01

Collecting, analyzing, and extracting valuable information from a large amount of data requires easily accessible, robust, computational and analytical tools. Data Mining and Business Analytics with R utilizes the open source software R for the analysis, exploration, and simplification of large high-dimensional data sets. As a result, readers are provided with the needed guidance to model and interpret complicated data and become adept at building powerful models for prediction and classification. Highlighting both underlying concepts and practical computational skills, Data Mining

Consumer energy conservation policy. An analytical approach

Energy Technology Data Exchange (ETDEWEB)

McDougall, G.H.G.; Ritchie, J.R.B.

1984-06-01

To capture the potential energy savings available in the consumer sector an analytical approach to conservation policy is proposed. A policy framework is described and the key constructs including a payoff matrix analysis and a consumer impact analysis are discussed. Implications derived from the considerable amount of prior consumer research are provided to illustrate the effect on the design and implementation of future programmes. The result of this analytical approach to conservation policy - economic stability and economic security - are goals well worth pursuing.

Rural Settlement Development and Environment Carrying Capacity Changes in Progo River Basin

OpenAIRE

Su Ritohardoyo; P Priyono

2016-01-01

Generally the broader rural settlement the heavier population pressure on agricultural land. It indicates that carrying capacity of the rural environment threatened lower. The spatial distribution of the threat in a river basin is quite important as one of the river basin management inputs. Therefore, this article aims at exposing result of research about influence rural population growth and rural settlement land changes to environment carrying capacity. This research was carried out in the ...

Thermal load at workstations in the underground coal mining: Results of research carried out in 6 coal mines

Directory of Open Access Journals (Sweden)

Krzysztof Słota

2016-08-01

Full Text Available Background: Statistics shows that almost half of Polish extraction in underground mines takes place at workstations where temperature exceeds 28°C. The number of employees working in such conditions is gradually increasing, therefore, the problem of safety and health protection is still growing. Material and Methods: In the present study we assessed the heat load of employees at different workstations in the mining industry, taking into account current thermal conditions and work costs. The evaluation of energy cost of work was carried out in 6 coal mines. A total of 221 miners employed at different workstations were assessed. Individual groups of miners were characterized and thermal safety of the miners was assessed relying on thermal discomfort index. Results: The results of this study indicate considerable differences in the durations of analyzed work processes at individual workstations. The highest average energy cost was noted during the work performed in the forehead. The lowest value was found in the auxiliary staff. The calculated index of discomfort clearly indicated numerous situations in which the admissible range of thermal load exceeded the parameters of thermal load safe for human health. It should be noted that the values of average labor cost fall within the upper, albeit admissible, limits of thermal load. Conclusions: The results of the study indicate that in some cases work in mining is performed in conditions of thermal discomfort. Due to high variability and complexity of work conditions it becomes necessary to verify the workers’ load at different workstations, which largely depends on the environmental conditions and work organization, as well as on the performance of workers themselves. Med Pr 2016;67(4:477–498

A Thematic-Based Meta Analytic Study Regarding the Effect of Creativity on Academic Success and Learning Retention

Science.gov (United States)

Özdas, Faysal; Batdi, Veli

2017-01-01

This thematic-based meta-analytic study aims to examine the effect of creativity on the academic success and learning retention scores of students. In the context of this aim, 18 out of 225 studies regarding creativity that were carried out between 2001 and 2011 have been obtained from certain national and international databases. The studies…

Case Study: IBM Watson Analytics Cloud Platform as Analytics-as-a-Service System for Heart Failure Early Detection

Directory of Open Access Journals (Sweden)

Gabriele Guidi

2016-07-01

Full Text Available In the recent years the progress in technology and the increasing availability of fast connections have produced a migration of functionalities in Information Technologies services, from static servers to distributed technologies. This article describes the main tools available on the market to perform Analytics as a Service (AaaS using a cloud platform. It is also described a use case of IBM Watson Analytics, a cloud system for data analytics, applied to the following research scope: detecting the presence or absence of Heart Failure disease using nothing more than the electrocardiographic signal, in particular through the analysis of Heart Rate Variability. The obtained results are comparable with those coming from the literature, in terms of accuracy and predictive power. Advantages and drawbacks of cloud versus static approaches are discussed in the last sections.

Achieving Cost Reduction Through Data Analytics.

Science.gov (United States)

Rocchio, Betty Jo

2016-10-01

The reimbursement structure of the US health care system is shifting from a volume-based system to a value-based system. Adopting a comprehensive data analytics platform has become important to health care facilities, in part to navigate this shift. Hospitals generate plenty of data, but actionable analytics are necessary to help personnel interpret and apply data to improve practice. Perioperative services is an important revenue-generating department for hospitals, and each perioperative service line requires a tailored approach to be successful in managing outcomes and controlling costs. Perioperative leaders need to prepare to use data analytics to reduce variation in supplies, labor, and overhead. Mercy, based in Chesterfield, Missouri, adopted a perioperative dashboard that helped perioperative leaders collaborate with surgeons and perioperative staff members to organize and analyze health care data, which ultimately resulted in significant cost savings. Copyright © 2016 AORN, Inc. Published by Elsevier Inc. All rights reserved.

Analytic properties of Feynman diagrams in quantum field theory

CERN Document Server

Todorov, I T

1971-01-01

Analytic Properties of Feynman Diagrams in Quantum Field Theory deals with quantum field theory, particularly in the study of the analytic properties of Feynman graphs. This book is an elementary presentation of a self-contained exposition of the majorization method used in the study of these graphs. The author has taken the intermediate position between Eden et al. who assumes the physics of the analytic properties of the S-matrix, containing physical ideas and test results without using the proper mathematical methods, and Hwa and Teplitz, whose works are more mathematically inclined with a

Comparative overview on the result of studies carried through to date

International Nuclear Information System (INIS)

Kuebler, K.

1989-01-01

The numerous expertises available show that it is not in fact unfeasible technically for the Federal Republic of Germany to opt out of nuclear power. This result is not an unimportant one for politics. But the expertises do not indicate that we should opt out of nuclear power now. In spite of all expertises, a comprehensive appraisal of nuclear power in the Federal Republic of Germany in economic, ecological, and socio-political respects is still lacking. So our political decisions must be taken on the basis of principles of common sense and certain calculating results within relatively narrow system boundaries. (orig/HSCH) [de

FEASIBILITY OF INVESTMENT IN BUSINESS ANALYTICS

Directory of Open Access Journals (Sweden)

Mladen Varga

2007-12-01

Full Text Available Trends in data processing for decision support show that business users need business analytics, i.e. analytical applications which incorporate a variety of business oriented data analysis techniques and task-specific knowledge. The paper discusses the feasibility of investment in two models of implementing business analytics: custom development and packed analytical applications. The consequences of both models are shown on two models of business analytics implementation in Croatia.

A characterization of dilation-analytic operators

International Nuclear Information System (INIS)

Balslev, E.; Grossmann, A.; Paul, T.

1986-01-01

Dilation analytic vectors and operators are characterized in a new representation of quantum mechanical states through functions analytic on the upper half-plane. In this space H o -bounded operators are integral operators and criteria for dilation analyticity are given in terms of analytic continuation outside of the half-plane for functions and for kernels. A sufficient condition is given for an integral operator in momentum space to be dilation-analytic

The Concept of Carrying Capacity in Tourism

Directory of Open Access Journals (Sweden)

Josef Zelenka

2014-05-01

Full Text Available Carrying capacity is often pragmatically, theoretically as well as purely intuitively considered as a concept in the context of tourism sustainability. The carrying capacity application has the greatest potential in protected areas, in frequently visited cultural and natural attractions, and in relation to sustaining of the lifestyle of the local community and tourism destination potential in general. Despite its importance, partial applications, determination of basic theoretical principles, and specifying connection to the other theoretical concepts in tourism (particularly destination life cycle, LAC concept, visitors management, there still is a rightful opinion of some authors suggesting that there is no consistent theory of tourism carrying capacity. This theory would be the base for sophisticated practical carrying capacity applications. This paper is therefore focused on introduction of the theoretical concept of carrying capacity, which can be discussed and possibly further elaborated.

Analytic of elements for the determination of soil->plant transfer factors

International Nuclear Information System (INIS)

Liese, T.

1985-02-01

This article describes a part of the conventional analytical work, which was done to determine soil to plant transfer factors. The analytical methods, the experiments to find out the best way of sample digestion and the resulting analytical procedures are described. Analytical methods are graphite furnace atomic absorption spectrometry (GFAAS) and inductively coupled plasma atomic emission spectrometry (ICP-AES). In case of ICP-AES the necessity of right background correction and correction of the spectral interferences is shown. The reliability of the analytical procedure is demonstrated by measuring different kinds of standard reference materials and by comparison of AAS and AES. (orig./HP) [de

Analytical and experimental study of two concentric cylinders coupled by a fluid gap

International Nuclear Information System (INIS)

Mulcahy, T.M.; Turula, P.; Chung, H.; Jendrzejczyk, J.A.

1975-04-01

A breeder reactor vessel is a substantial steel cylinder which is partially protected from the nuclear reaction temperature by a relatively thin concentric shell separated from the vessel by a narrow fluid-filled gap. An experimental and analytical study of the vibration of a model of such a shell used in the Fast Test Reactor is described. The analytical work consists first using a free vibration solution of the shell in vacuum as a basis for extrapolating vibration behavior for the same shell with a fluid gap. Then a direct finite element solution is found for the actual problem--the shell and the fluid coupling it to the rigid outer container. All the finite element computations were carried out using the NASTRAN program. The experimental setup consisted of a steel sheet rolled and welded into a cylinder, free at the top edge and at the bottom soldered to a disc which in turn was bolted to a heavy base plate. The fluid gap was provided by using a thick concrete shell as the outer cylinder. A series of these cylinders was used to provide several sizes of annular gap. The case of the steel shell alone, without fluid, was also considered. The steel cylinder was vibrated by an electromagnetic exciter using both harmonic loading and random loading functions. In general, correspondence of experimental and analytical results is within acceptable limits; however, several vibration modes corresponding to solutions with low circumferential wave numbers were not detected experimentally. Response analysis performed to compare the response amplitude at various modes indicates that the intensity at the modes in question is very low. (U.S.)

Aquatic concentrations of chemical analytes compared to ecotoxicity estimates

Science.gov (United States)

Kostich, Mitchell S.; Flick, Robert W.; Angela L. Batt,; Mash, Heath E.; Boone, J. Scott; Furlong, Edward T.; Kolpin, Dana W.; Glassmeyer, Susan T.

2017-01-01

We describe screening level estimates of potential aquatic toxicity posed by 227 chemical analytes that were measured in 25 ambient water samples collected as part of a joint USGS/USEPA drinking water plant study. Measured concentrations were compared to biological effect concentration (EC) estimates, including USEPA aquatic life criteria, effective plasma concentrations of pharmaceuticals, published toxicity data summarized in the USEPA ECOTOX database, and chemical structure-based predictions. Potential dietary exposures were estimated using a generic 3-tiered food web accumulation scenario. For many analytes, few or no measured effect data were found, and for some analytes, reporting limits exceeded EC estimates, limiting the scope of conclusions. Results suggest occasional occurrence above ECs for copper, aluminum, strontium, lead, uranium, and nitrate. Sparse effect data for manganese, antimony, and vanadium suggest that these analytes may occur above ECs, but additional effect data would be desirable to corroborate EC estimates. These conclusions were not affected by bioaccumulation estimates. No organic analyte concentrations were found to exceed EC estimates, but ten analytes had concentrations in excess of 1/10th of their respective EC: triclocarban, norverapamil, progesterone, atrazine, metolachlor, triclosan, para-nonylphenol, ibuprofen, venlafaxine, and amitriptyline, suggesting more detailed characterization of these analytes.

Analytical, antioxidant and hepatoprotective studies on extracts of oxalis corniculata linn

International Nuclear Information System (INIS)

Hussain, I.S.; Islam, M.; Khan, M.T.

2014-01-01

Despite a number of traditional medicinal uses and pharmacological properties, the usefulness of Oxalis corniculata Linn. (Family: Oxalidaceae) is a question due to its high oxalate content which can form insoluble salts with physiological calcium. Therefore, the present study aimed to reduce oxalates in extracts and to investigate such extracts chemically and biologically. The extraction was carried out using different solvents and methods, and analytical studies of extracts indicated that oxalate contents decrease on drying the material. Furthermore, extraction of both fresh and dried materials using 1 % aqueous calcium chloride and ferric chloride solutions resulted in lowering oxalate contents. Methanolic extracts of stems and leaves having lower oxalates were obtained using sequential extraction, which showed good in vitro antioxidant activity - by DPPH and beta-carotene linoleate models - and in vivo hepatoprotective activity in isoniazid and rifampicin-induced oxidative stressed rats (P < 0.05). It was concluded that methanolic extracts of leaves and stems of Oxalis corniculata had lower oxalates and showed promising antioxidant and hepatoprotective activities. (author)

Advanced business analytics

CERN Document Server

Lev, Benjamin

2015-01-01

The book describes advanced business analytics and shows how to apply them to many different professional areas of engineering and management. Each chapter of the book is contributed by a different author and covers a different area of business analytics. The book connects the analytic principles with business practice and provides an interface between the main disciplines of engineering/technology and the organizational, administrative and planning abilities of management. It also refers to other disciplines such as economy, finance, marketing, behavioral economics and risk analysis. This book is of special interest to engineers, economists and researchers who are developing new advances in engineering management but also to practitioners working on this subject.

A semi-analytical modelling of multistage bunch compression with collective effects

International Nuclear Information System (INIS)

Zagorodnov, Igor; Dohlus, Martin

2010-07-01

In this paper we introduce an analytical solution (up to the third order) for a multistage bunch compression and acceleration system without collective effects. The solution for the system with collective effects is found by an iterative procedure based on this analytical result. The developed formalism is applied to the FLASH facility at DESY. Analytical estimations of RF tolerances are given. (orig.)

A semi-analytical modelling of multistage bunch compression with collective effects

Energy Technology Data Exchange (ETDEWEB)

Zagorodnov, Igor; Dohlus, Martin

2010-07-15

In this paper we introduce an analytical solution (up to the third order) for a multistage bunch compression and acceleration system without collective effects. The solution for the system with collective effects is found by an iterative procedure based on this analytical result. The developed formalism is applied to the FLASH facility at DESY. Analytical estimations of RF tolerances are given. (orig.)

A free vibration of beams carrying a concentrated mass under distributed axial forces

International Nuclear Information System (INIS)

Nagai, Ken-ichi; Nagaya, Kosuke; Takeda, Sadahiko; Arai, Noriyuki.

1988-01-01

The free bending vibrations of beams with a concentrated mass subjected to axial forces caused by axial acceleration are analyzed by the Galerkin method, introducing the mode shape functions which are the sum of the products of the finite power series and the trigonometrical function. This analytical method makes it easy to construct the equations of motion in each boundary condition only by exchanging the coefficients of the finite power series. Numerical calculations are carried out under four sets of boundary conditions combined with simply supported and clamped edges. The natural frequencies and the corresponding modes of vibration are determined under both various locations of the concentrated mass and axial forces. it is found that the transverse inertia force and the axial force, due to the concentrated mass, have significant effects on the change of the natural frequencies for beams. Furthermore the distinction of boundary conditions gives predominant influence to the variation of natural frequencies. (author)

Experimental validation of an analytical kinetic model for edge-localized modes in JET-ITER-like wall

Science.gov (United States)

Guillemaut, C.; Metzger, C.; Moulton, D.; Heinola, K.; O’Mullane, M.; Balboa, I.; Boom, J.; Matthews, G. F.; Silburn, S.; Solano, E. R.; contributors, JET

2018-06-01

The design and operation of future fusion devices relying on H-mode plasmas requires reliable modelling of edge-localized modes (ELMs) for precise prediction of divertor target conditions. An extensive experimental validation of simple analytical predictions of the time evolution of target plasma loads during ELMs has been carried out here in more than 70 JET-ITER-like wall H-mode experiments with a wide range of conditions. Comparisons of these analytical predictions with diagnostic measurements of target ion flux density, power density, impact energy and electron temperature during ELMs are presented in this paper and show excellent agreement. The analytical predictions tested here are made with the ‘free-streaming’ kinetic model (FSM) which describes ELMs as a quasi-neutral plasma bunch expanding along the magnetic field lines into the Scrape-Off Layer without collisions. Consequences of the FSM on energy reflection and deposition on divertor targets during ELMs are also discussed.

Learning Analytics: Readiness and Rewards

Science.gov (United States)

Friesen, Norm

2013-01-01

This position paper introduces the relatively new field of learning analytics, first by considering the relevant meanings of both "learning" and "analytics," and then by looking at two main levels at which learning analytics can be or has been implemented in educational organizations. Although integrated turnkey systems or…

Developing Healthcare Data Analytics APPs with Open Data Science Tools.

Science.gov (United States)

Hao, Bibo; Sun, Wen; Yu, Yiqin; Xie, Guotong

2017-01-01

Recent advances in big data analytics provide more flexible, efficient, and open tools for researchers to gain insight from healthcare data. Whilst many tools require researchers to develop programs with programming languages like Python, R and so on, which is not a skill set grasped by many researchers in the healthcare data analytics area. To make data science more approachable, we explored existing tools and developed a practice that can help data scientists convert existing analytics pipelines to user-friendly analytics APPs with rich interactions and features of real-time analysis. With this practice, data scientists can develop customized analytics pipelines as APPs in Jupyter Notebook and disseminate them to other researchers easily, and researchers can benefit from the shared notebook to perform analysis tasks or reproduce research results much more easily.

Analytical Evaluation to Determine Selected PAHs in a Contaminated Soil With Type II Fuel

International Nuclear Information System (INIS)

Garcia Alonso, S.; Perez Pastor, R. M.; Sevillano Castano, M. L.; Garcia Frutos, F. J.

2010-01-01

A study on the optimization of an ultrasonic extraction method for selected PAHs determination in soil contaminated by type II fuel and by using HPLC with fluorescence detector is presented. The main objective was optimize the analytical procedure, minimizing the volume of solvent and analysis time and avoiding possible loss by evaporation. This work was carried out as part of a project that investigated a remediation process of agricultural land affected by an accidental spillage of fuel (Plan Nacional I + D + i, CTM2007-64 537). The paper is structured as: Optimization of wavelengths in the chromatographic conditions to improve resolution in the analysis of fuel samples. Optimization of the main parameters affecting in the extraction process by sonication. Comparison of results with those obtained by accelerated solvent extraction. (Author) 3 refs.

Consumer energy - conservation policy: an analytical approach

Energy Technology Data Exchange (ETDEWEB)

McDougall, G.H.G.; Ritchie, J.R.B.

1984-06-01

To capture the potential energy savings available in the consumer sector an analytical approach to conservation policy is proposed. A policy framework is described, and the key constructs including a payoff matrix analysis and a consumer impact analysis are discussed. Implications derived from the considerable amount of prior consumer research are provided to illustrate the effect on the design and implementation of future programs. The result of this analytical approach to conservation policy (economic stability and economic security) are goals well worth pursuing. 13 references, 2 tables.

Quantifying uncertainty in nuclear analytical measurements

International Nuclear Information System (INIS)

2004-07-01

The lack of international consensus on the expression of uncertainty in measurements was recognised by the late 1970s and led, after the issuance of a series of rather generic recommendations, to the publication of a general publication, known as GUM, the Guide to the Expression of Uncertainty in Measurement. This publication, issued in 1993, was based on co-operation over several years by the Bureau International des Poids et Mesures, the International Electrotechnical Commission, the International Federation of Clinical Chemistry, the International Organization for Standardization (ISO), the International Union of Pure and Applied Chemistry, the International Union of Pure and Applied Physics and the Organisation internationale de metrologie legale. The purpose was to promote full information on how uncertainty statements are arrived at and to provide a basis for harmonized reporting and the international comparison of measurement results. The need to provide more specific guidance to different measurement disciplines was soon recognized and the field of analytical chemistry was addressed by EURACHEM in 1995 in the first edition of a guidance report on Quantifying Uncertainty in Analytical Measurements, produced by a group of experts from the field. That publication translated the general concepts of the GUM into specific applications for analytical laboratories and illustrated the principles with a series of selected examples as a didactic tool. Based on feedback from the actual practice, the EURACHEM publication was extensively reviewed in 1997-1999 under the auspices of the Co-operation on International Traceability in Analytical Chemistry (CITAC), and a second edition was published in 2000. Still, except for a single example on the measurement of radioactivity in GUM, the field of nuclear and radiochemical measurements was not covered. The explicit requirement of ISO standard 17025:1999, General Requirements for the Competence of Testing and Calibration

Pre-analytical and analytical factors influencing Alzheimer's disease cerebrospinal fluid biomarker variability.

Science.gov (United States)

Fourier, Anthony; Portelius, Erik; Zetterberg, Henrik; Blennow, Kaj; Quadrio, Isabelle; Perret-Liaudet, Armand

2015-09-20

A panel of cerebrospinal fluid (CSF) biomarkers including total Tau (t-Tau), phosphorylated Tau protein at residue 181 (p-Tau) and β-amyloid peptides (Aβ42 and Aβ40), is frequently used as an aid in Alzheimer's disease (AD) diagnosis for young patients with cognitive impairment, for predicting prodromal AD in mild cognitive impairment (MCI) subjects, for AD discrimination in atypical clinical phenotypes and for inclusion/exclusion and stratification of patients in clinical trials. Due to variability in absolute levels between laboratories, there is no consensus on medical cut-off value for the CSF AD signature. Thus, for full implementation of this core AD biomarker panel in clinical routine, this issue has to be solved. Variability can be explained both by pre-analytical and analytical factors. For example, the plastic tubes used for CSF collection and storage, the lack of reference material and the variability of the analytical protocols were identified as important sources of variability. The aim of this review is to highlight these pre-analytical and analytical factors and describe efforts done to counteract them in order to establish cut-off values for core CSF AD biomarkers. This review will give the current state of recommendations. Copyright © 2015. Published by Elsevier B.V.

Analytical techniques and quality control in biomedical trace element research

DEFF Research Database (Denmark)

Heydorn, K.

1994-01-01

The small number of analytical results in trace element research calls for special methods of quality control. It is shown that when the analytical methods are in statistical control, only small numbers of duplicate or replicate results are needed to ascertain the absence of systematic errors....../kg. Measurement compatibility is obtained by control of traceability to certified reference materials, (C) 1994 Wiley-Liss, Inc....

A Business Analytics Software Tool for Monitoring and Predicting Radiology Throughput Performance.

Science.gov (United States)

Jones, Stephen; Cournane, Seán; Sheehy, Niall; Hederman, Lucy

2016-12-01

Business analytics (BA) is increasingly being utilised by radiology departments to analyse and present data. It encompasses statistical analysis, forecasting and predictive modelling and is used as an umbrella term for decision support and business intelligence systems. The primary aim of this study was to determine whether utilising BA technologies could contribute towards improved decision support and resource management within radiology departments. A set of information technology requirements were identified with key stakeholders, and a prototype BA software tool was designed, developed and implemented. A qualitative evaluation of the tool was carried out through a series of semi-structured interviews with key stakeholders. Feedback was collated, and emergent themes were identified. The results indicated that BA software applications can provide visibility of radiology performance data across all time horizons. The study demonstrated that the tool could potentially assist with improving operational efficiencies and management of radiology resources.

Development and Verification of Behavior of Tritium Analytic Code (BOTANIC)

International Nuclear Information System (INIS)

Park, Min Young; Kim, Eung Soo

2014-01-01

VHTR, one of the Generation IV reactor concepts, has a relatively high operation temperature and is usually suggested as a heat source for many industrial processes, including hydrogen production process. Thus, it is vital to trace tritium behavior in the VHTR system and the potential permeation rate to the industrial process. In other words, tritium is a crucial issue in terms of safety in the fission reactor system. Therefore, it is necessary to understand the behavior of tritium and the development of the tool to enable this is vital.. In this study, a Behavior of Tritium Analytic Code (BOTANIC) an analytic tool which is capable of analyzing tritium behavior is developed using a chemical process code called gPROMS. BOTANIC was then further verified using the analytic solutions and benchmark codes such as Tritium Permeation Analysis Code (TPAC) and COMSOL. In this study, the Behavior of Tritium Analytic Code, BOTANIC, has been developed using a chemical process code called gPROMS. The code has several distinctive features including non-diluted assumption, flexible applications and adoption of distributed permeation model. Due to these features, BOTANIC has the capability to analyze a wide range of tritium level systems and has a higher accuracy as it has the capacity to solve distributed models. BOTANIC was successfully developed and verified using analytical solution and the benchmark code calculation result. The results showed very good agreement with the analytical solutions and the calculation results of TPAC and COMSOL. Future work will be focused on the total system verification

Simulation and Analysis of Microwave Transmission through an Electron Cloud, a Comparison of Results

International Nuclear Information System (INIS)

Sonnad, Kiran; Sonnad, Kiran; Furman, Miguel; Veitzer, Seth; Stoltz, Peter; Cary, John

2007-01-01

Simulation studies for transmission of microwaves through electron clouds show good agreement with analytic results. The electron cloud produces a shift in phase of the microwave. Experimental observation of this phenomena would lead to a useful diagnostic tool for accessing the local density of electron clouds in an accelerator. These experiments are being carried out at the CERN SPS and the PEP-II LER at SLAC and is proposed to be done at the Fermilab main injector. In this study, a brief analysis of the phase shift is provided and the results are compared with that obtained from simulations

Analytical methods used in plutonium purification cycles by trilaurylamine

International Nuclear Information System (INIS)

Perez, J.J.

1965-01-01

The utilisation of trilaurylamine as a solvent extractant for the purification of plutonium has entailed to perfect a set of analytical methods which involves, various techniques. The organic impurities of the solvent can be titrated by gas-liquid chromatography. The titration of the main degradation product, the di-laurylamine, can be accomplished also by spectro-colorimetry. Potentiometry is used for the analysis of the different salts of amine-nitrate-sulfate-bisulfate as also the extracted nitric acid. The determination of the nitrate in aqueous phase is carried out by constant current potentiometry. The range of application, the accuracy and the procedure of these analysis are related in the present report. (author) [fr

Division of Analytical Chemistry, 1998

DEFF Research Database (Denmark)

Hansen, Elo Harald

1999-01-01

The article recounts the 1998 activities of the Division of Analytical Chemistry (DAC- formerly the Working Party on Analytical Chemistry, WPAC), which body is a division of the Federation of European Chemical Societies (FECS). Elo Harald Hansen is the Danish delegate, representing The Danish...... Chemical Society/The Society for Analytical Chemistry....

Trials carried out on corrosive (fluorinated) atmosphere vacuum gauges

International Nuclear Information System (INIS)

Constant, M.; Houyvet, A.; Noe, P.

1966-01-01

Study of the stability of readings given by a modified Pirani type measurement probe with a view to long term operation in the presence of corrosive gases. Results of measurements carried out before and after use under these conditions. (author) [fr

First qualitative analysis of fuel irradiation results carried out in the MR reactor on WWER-1000 fuel

Energy Technology Data Exchange (ETDEWEB)

Chantoin, P [International Atomic Energy Agency, Vienna (Austria); Dubrovin, K; Platonov, P [Russian Research Centre Kurchatov Inst., Moscow (Russian Federation); Onufriev, V [Vsesoyuznyj Nauchno-Issledovatel` skij Inst. Neorganicheskikh Materialov, Moscow (Russian Federation)

1994-12-31

Four experiments carried out in the MR reactor are evaluated. They are aimed to assess the influence of burnup and the size of the pellet central hole on the fuel temperature and thus on the fuel swelling and fission gas release. The experiments have been performed at different linear rate and burnup of the fuel rods which are above the actual licensed values in WWER power stations. In this paper the results on WWER fuel rod behaviour are examined. The main fabrication and irradiation characteristics for each experiment are given. The main results from destructive and non-destructive examinations are summarized. They include: burnup determination by gamma spectroscopy, caesium shifting along fuel column and accumulation at the end of the fuel stack, fission gas release. fuel rod diameter and length change and macro-graphs showing the central hole size and the morphology after irradiation. From observation of fuel structure, Cs spectrometry and fission gas release, a large degradation of fuel thermal conductivity can be identified at high burnup. If the fuel burnup is the right parameter to be considered, burnup limits identified are: 0 70-75 MWd/kg for rods with large central hole; (2) 58-64 MWd/kg for rods with small central hole. As a general conclusion it is stressed the importance of the study due to irradiation beyond the usual linear rates at high burnup. Up to now the fuel life limiting factor was cladding corrosion when using Zircaloy-4. As the cladding corrosion situation improves, the next life limiting factor to be met could be the fuel itself. The decreasing fuel thermal conductivity is probably of prime importance and should be further studied and modelled. 5 tabs., 5 figs., 3 refs.

Analytical chemistry of nuclear materials

International Nuclear Information System (INIS)

1966-01-01

The second panel on the Analytical Chemistry of Nuclear Materials was organized for two purposes: first, to advise the Seibersdorf Laboratory of the Agency on its future programme, and second, to review the results of the Second International Comparison of routine analysis of trace impurities in uranium and also the action taken as a result of the recommendations of the first panel in 1962. Refs, figs and tabs

Rigid inclusions-Comparison between analytical and numerical methods

International Nuclear Information System (INIS)

Gomez Perez, R.; Melentijevic, S.

2014-01-01

This paper compares different analytical methods for analysis of rigid inclusions with finite element modeling. First of all, the load transfer in the distribution layer is analyzed for its different thicknesses and different inclusion grids to define the range between results obtained by analytical and numerical methods. The interaction between the soft soil and the inclusion in the estimation of settlements is studied as well. Considering different stiffness of the soft soil, settlements obtained analytical and numerically are compared. The influence of the soft soil modulus of elasticity on the neutral point depth was also performed by finite elements. This depth has a great importance for the definition of the total length of rigid inclusion. (Author)

Analytical and critical thinking skills in public relations

Directory of Open Access Journals (Sweden)