Selecting and Improving Quasi-Experimental Designs in Effectiveness and Implementation Research.

Science.gov (United States)

Handley, Margaret A; Lyles, Courtney R; McCulloch, Charles; Cattamanchi, Adithya

2018-04-01

Interventional researchers face many design challenges when assessing intervention implementation in real-world settings. Intervention implementation requires holding fast on internal validity needs while incorporating external validity considerations (such as uptake by diverse subpopulations, acceptability, cost, and sustainability). Quasi-experimental designs (QEDs) are increasingly employed to achieve a balance between internal and external validity. Although these designs are often referred to and summarized in terms of logistical benefits, there is still uncertainty about (a) selecting from among various QEDs and (b) developing strategies to strengthen the internal and external validity of QEDs. We focus here on commonly used QEDs (prepost designs with nonequivalent control groups, interrupted time series, and stepped-wedge designs) and discuss several variants that maximize internal and external validity at the design, execution and implementation, and analysis stages.

An Approach for Designing and Implementing Middleware in Wireless Sensor Networks

Directory of Open Access Journals (Sweden)

Ronald Beaubrun

2012-03-01

Full Text Available In this paper, we propose an approach for designing and implementing a middleware for data dissemination in Wireless Sensor Networks (WSNs. The designing aspect considers three perspectives: device, network and application. Each application layer is implemented as an independent Component Object Model (COM Project which offers portability, security, reusability and domain expertise encapsulation. For result analysis, the percentage of success is used as performance parameter. Such analysis reveals that the middleware enables to greatly increase the percentage of success of the messages disseminated in a WSN.

DESIGN AND IMPLEMENTATION OF A VHDL PROCESSOR FOR DCT BASED IMAGE COMPRESSION

Directory of Open Access Journals (Sweden)

Md. Shabiul Islam

2017-11-01

Full Text Available This paper describes the design and implementation of a VHDL processor meant for performing 2D-Discrete Cosine Transform (DCT to use in image compression applications. The design flow starts from the system specification to implementation on silicon and the entire process is carried out using an advanced workstation based design environment for digital signal processing. The software allows the bit-true analysis to ensure that the designed VLSI processor satisfies the required specifications. The bit-true analysis is performed on all levels of abstraction (behavior, VHDL etc.. The motivation behind the work is smaller size chip area, faster processing, reducing the cost of the chip

Containment penetration design criteria and implementation

International Nuclear Information System (INIS)

Perry, R.F.; Rigamonti, G.; Dainora, J.

1975-01-01

A rational design criteria is presented which serves as a basis for the design and analysis of containment piping penetrations. The criteria includes the effect of temperature as well as mechanical loads for the full range of plant conditions. With this criteria various penetration flued head designs have been compared and optimization achieved. Sleeve wall dimensions and containment loads have been determined without reference to piping configuration. An interaction theory which allows the implementation of the criteria for the determination of design loads and minimum sleeve wall thickness. The interaction theory developed applies to elastic-perfectly plastic cylinders (pipes and sleeves) and accounts for the simultaneous load resultants of transverse shear force, bending moment, torsional moment, and axial force in addition to internal pipe pressure. Application of the theory developed to the determination of sleeve thickness and containment design loads is presented in detail. (Auth.)

System analysis and design

International Nuclear Information System (INIS)

Son, Seung Hui

2004-02-01

This book deals with information technology and business process, information system architecture, methods of system development, plan on system development like problem analysis and feasibility analysis, cases for system development, comprehension of analysis of users demands, analysis of users demands using traditional analysis, users demands analysis using integrated information system architecture, system design using integrated information system architecture, system implementation, and system maintenance.

Implementing a Generative Urban Design Model : Grammar-based design patterns for urban design

NARCIS (Netherlands)

Beirao, J.N.; Mendes, G.; Duarte, J.; Stouffs, R.M.F.

2010-01-01

This paper shows the first results of a prototype implementation of a generative urban design tool. This implementation will form part of a design support tool for a GIS based platform defined to formulate, generate and evaluate urban designs. These three goals, formulation, generation and

Design, implementation and licensing of improvement measures

International Nuclear Information System (INIS)

Rousset, P.

2000-01-01

Modifications are designed to contribute to improve the level of safety, and the level of performance of the plants. The successful implementation of a modification depends on the quality of the design and particularly the good fitting of the modification in the existing design, on the perfect consistency of the licensing approach and on the good management of the project constraints and interfaces. Over the last ten years, FRAMATOME has accumulated a large and varied experience in these activities, as shown in the few examples briefly described in the presentation. Within the Mochovce completion project, FRAMATOME has been in charge of the basic design or implementation of about twenty safety measures. This involved establishing efficient partnerships with design organizations and suppliers in the Slovak Republic, Czech Republic, and Russia. A similar approach is used in the frame of the Kozloduy 5-6 modernization program, where the basic engineering contract is conducted since 1998 and the main contract under discussion. From the very beginning of the TACIS program FRAMATOME has been involved in projects dealing with the design of reactor safety systems. For example, an extensive work aiming at developing a methodology for accident analysis in VVER reactor was initiated in 1993, in collaboration with Siemens, Kurchatov Institute and OKB Gidropress. This methodology was recently used successfully in a new project with the objective to evaluate the possible modification of reactor protection signals of some Russian reactors. Within the PHARE program, a complete analysis of the primary to secondary leakage risk was conducted for Paks nuclear power plant. This involved the writing and validation of the relevant emergency procedure, specification of the leak detection system, study of an improved design of the collector cover, and recommendation of some systems modifications. A last example is the study of the modifications of main steam lines performed in the frame

Adaptive streaming applications : analysis and implementation models

NARCIS (Netherlands)

Zhai, Jiali Teddy

2015-01-01

This thesis presents a highly automated design framework, called DaedalusRT, and several novel techniques. As the foundation of the DaedalusRT design framework, two types of dataflow Models-of-Computation (MoC) are used, one as timing analysis model and another one as the implementation model. The

Design and FPGA Implementation of a new hyperchaotic system

International Nuclear Information System (INIS)

Wang Guangyi; Bao Xulei; Wang Zhonglin

2008-01-01

In this paper, a new four-dimensional autonomous hyperchaotic system is designed for generating complex chaotic signals. In the design, its parameters are selected according to the requirements for chaos and hyperchaos. The hyperchaotic Nature is verified theoretically by using the bifurcation analysis and demonstrated experimentally by the implementation of an analogue electronic circuit. Moreover, the Field Programmable Gate Array (FPGA) technology is applied to implementing a continuous system in a digital form by using a chip of Altera Cyclone II EP2C35F484C8. The digital sequence generated from the FPGA device is observed in our experimental setup. (general)

Designing, Developing, and Implementing Diversity Training: Guidelines for Practitioners.

Science.gov (United States)

Kincaid, Tanna M.; Horner, Erin R.

1997-01-01

Discusses diversity in the workplace and offers guidelines for practitioners in designing, developing, and implementing diversity training. Highlights include linking the diversity initiative to the organization's mission, cultural climate assessments, reviewing policies and procedures, needs assessment, learner analysis, establishing objectives,…

Modeling, Design, and Implementation of a Cloud Workflow Engine Based on Aneka

OpenAIRE

Zhou, Jiantao; Sun, Chaoxin; Fu, Weina; Liu, Jing; Jia, Lei; Tan, Hongyan

2014-01-01

This paper presents a Petri net-based model for cloud workflow which plays a key role in industry. Three kinds of parallelisms in cloud workflow are characterized and modeled. Based on the analysis of the modeling, a cloud workflow engine is designed and implemented in Aneka cloud environment. The experimental results validate the effectiveness of our approach of modeling, design, and implementation of cloud workflow.

Voltage-to-frequency converters CMOS design and implementation

CERN Document Server

Azcona Murillo, Cristina; Pueyo, Santiago Celma

2013-01-01

This book develops voltage-to-frequency converter (VFC) solutions integrated in standard CMOS technology to be used as a part of a microcontroller-based, multisensor interface in the environment of portable applications, particularly within a WSN node.  Coverage includes the total design flow of monolithic VFCs, according to the target application, as well as the analysis, design and implementation of the main VFC blocks, revealing the main challenges and solutions encountered during the design of such high performance cells. Four complete VFCs, each temperature compensated, are fully designed and evaluated: a programmable VFC that includes an offset frequency and a sleep/mode enable terminal; a low power rail-to-rail VFC; and two rail-to-rail differential VFCs.

Iterative Prototyping of Strategy Implementation Workshop Design

DEFF Research Database (Denmark)

Kryger, Anders

2018-01-01

Purpose: The purpose of this paper is to demonstrate how a strategy implementation workshop design can be developed and tested while minimizing the time spent on developing the design. Design/methodology/approach: This multiple case study at a diesel engine company shows how iterative prototyping...... can be used to structure the design process of a strategy implementation workshop. Findings: Strategy implementation workshop design can be developed in resource-constrained environments through iterative prototyping of the workshop design. Each workshop iteration can generate value in its own right...... draw on his/her experience as well as add to his/her knowledge base. Originality/value: Introducing iterative prototyping in an organizational context can facilitate fast yet structured development of a rigorous workshop design. Strategy consultants are provided with empirical examples of how...

Partnerships for the Design, Conduct, and Analysis of Effectiveness, and Implementation Research: Experiences of the Prevention Science and Methodology Group

Science.gov (United States)

Brown, C. Hendricks; Kellam, Sheppard G.; Kaupert, Sheila; Muthén, Bengt O.; Wang, Wei; Muthén, Linda K.; Chamberlain, Patricia; PoVey, Craig L.; Cady, Rick; Valente, Thomas W.; Ogihara, Mitsunori; Prado, Guillermo J.; Pantin, Hilda M.; Gallo, Carlos G.; Szapocznik, José; Czaja, Sara J.; McManus, John W.

2012-01-01

What progress prevention research has made comes through strategic partnerships with communities and institutions that host this research, as well as professional and practice networks that facilitate the diffusion of knowledge about prevention. We discuss partnership issues related to the design, analysis, and implementation of prevention research and especially how rigorous designs, including random assignment, get resolved through a partnership between community stakeholders, institutions, and researchers. These partnerships shape not only study design, but they determine the data that can be collected and how results and new methods are disseminated. We also examine a second type of partnership to improve the implementation of effective prevention programs into practice. We draw on social networks to studying partnership formation and function. The experience of the Prevention Science and Methodology Group, which itself is a networked partnership between scientists and methodologists, is highlighted. PMID:22160786

Designing and implementing a balanced scorecard: lessons learned in nonprofit implementation.

Science.gov (United States)

Gumbus, Andra; Wilson, Tom

2004-01-01

The balanced scorecard has been referred to as the management innovation of the century, and extensive articles have been written using case studies of organizations that use this performance measurement system. This article addresses the key issues of design and implementation with a step-by-step guide to how to design a balanced scorecard and lessons to avoid implementation problems in government and nonprofit settings.

High-performance pickups for beam diagnostics. Design, analysis, characterization and implementation

International Nuclear Information System (INIS)

Angelovski, Aleksandar

2015-01-01

This work introduces the design, analysis, characterization and implementation of high-performance pickups for two beam diagnostic instruments, a Bunch Arrival-time Monitor (BAM) and an Energy Beam Position Monitor (EBPM) at the European XFEL. As a part of the BAM the cone-shaped pickups are proposed along with the corresponding RF-frontend. The designed pickups deliver a beam induced signal with a slope steepness of around 400 mV/ps and a bandwidth of 40 GHz. These signal characteristics are well inside the design requirements, i.e., a slope steepness of 300 mV/ps and more than ten times better compared to the signal from the state-of-the-art pickups. The pickups are installed and commissioned at three accelerator facilities, FLASH at DESY, the quasi-CW SRF accelerator ELBE at the Helmholtz-Zentrum Dresden-Rossendorf and the SwissFEL injector test facility at Paul Scherrer Institute. The obtained measurement results from the installed pickups are in good agreement with the simulations. A comparison between the signal measurements with the cone-shaped pickup and the state-of-the-art is performed at ELBE showing an improvement by a factor of ten. The potential of the pickups for sub-10 fs arrival-time measurements for bunch charges of 20 pC is demonstrated at ELBE and at SwissFEL injector test facility. The introduced coneshaped pickups are the first commercially available pickups with a bandwidth of up to 40 GHz. For the EBPM, a modular pickup structure with two types of planar pickups, microstrip transmission line and grounded coplanar waveguide with perpendicular connectors is investigated. The transition region between the connector and the line is optimized for two substrate materials, alumina and glass with a reflection coefficient better than -20 dB up to 6 GHz.

Mobilizing the Courage to Implement Sustainable Design Solutions

DEFF Research Database (Denmark)

Nielsen, Susanne Balslev; Hoffmann, Birgitte; Quitzau, Maj-Britt

2009-01-01

of design managers and others to develop socio-technical networks and storylines to integrate sustainability in the design and building processes. Implementation of sustainable design solutions takes more than courage; it requires key competences in catalysing network changes......., the work focuses on examples of successful implementation in an attempt to understand the competences required. Danish frontrunner projects are described and analysed: one case concerns the implementation of lowenergy houses and another describes innovative planning processes in the water sector in order...... networks and creative work forms constitutes the outset for change. The work is inspired by the actor-network theory, emphasizing the momentum of prevailing practices, and the need to (re)develop networks to support implementation of sustainable design solutions. Conclusions point to the importance...

Implementing Safeguards-by-Design

International Nuclear Information System (INIS)

Bjornard, Trond; Bean, Robert; Durst, Phillip Casey; Hockert, John; Morgan, James

2010-01-01

Excerpt Safeguards-by-Design (SBD) is an approach to the design and construction of nuclear facilities whereby safeguards are designed-in from the very beginning. It is a systematic and structured approach for fully integrating international and national safeguards (MC and A), physical security, and other proliferation barriers into the design and construction process for nuclear facilities. SBD is primarily a project management or project coordination challenge, and this report focuses on that aspect of SBD. The present report continues the work begun in 2008 and focuses specifically on the design process, or project management and coordination - the planning, definition, organization, coordination, scheduling and interaction of activities of the safeguards experts and stakeholders as they participate in the design and construction of a nuclear facility. It delineates the steps in a nuclear facility design and construction project, in order to provide the project context within which the safeguards design activities take place, describes the involvement of safeguards experts in the design process, the nature of their analyses, interactions and decisions, as well as describing the documents created and how they are used. Designing and constructing a nuclear facility is an extremely complex undertaking. The stakeholders in an actual project are many - owner, operator, State regulators, nuclear facility primary contractor, subcontractors (e.g. instrument suppliers), architect engineers, project management team, safeguards, safety and security experts, in addition to the IAEA and its team. The purpose of the present report is to provide a common basis for discussions amongst stakeholders to collaboratively develop a SBD approach that will be both practically useful and mutually beneficial. The principal conclusions from the present study are: (1) In the short term, the successful implementation of SBD is principally a project management problem. (2) Life-cycle cost

Best practices of Building Information Modelling (BIM) implementation in design phase for construction project

Science.gov (United States)

Kasim, N.; Zainal Abidin, N. A.; Zainal, R.; Sarpin, N.; Rahim, M. H. I. Abd; Saikah, M.

2017-11-01

Implementation of Building Information Modelling (BIM) was expected to bring improvement in current practices of Malaysian construction industry. In the design phase, there is a lack of a ready pool of skilled workers who are able to develop BIM strategic plan and effectively utilise it. These create boundaries for BIM nature in Malaysian construction industry specifically in the design phase to achieve its best practices. Therefore, the objectives of this research are to investigate the current practices of BIM implementation in the design phase as well as the best practices factors of BIM implementation in the design phase. The qualitative research approach is carried out through semi-structured interviews with the designers of different organisations which adopt BIM in the design phase. Data collection is analysed by executing content analysis method. From the findings, the best practices factors of BIM implementation in design phase such as the incentive for BIM training, formal approach to monitoring automated Level of Detailing (LOD), run a virtual meeting and improve Industry Foundation Class (IFC). Thus, best practices factors which lead to practices improvements in the design phase of project development which subsequently improves the implementation of BIM in the design phase of Malaysian construction industry.

Implementing The Safeguards-By-Design Process

International Nuclear Information System (INIS)

Whitaker, J. Michael; McGinnis, Brent; Laughter, Mark D.; Morgan, Jim; Bjornard, Trond; Bean, Robert; Durst, Phillip; Hockert, John; DeMuth, Scott; Lockwood, Dunbar

2010-01-01

The Safeguards-by-Design (SBD) approach incorporates safeguards into the design and construction of nuclear facilities at the very beginning of the design process. It is a systematic and structured approach for fully integrating international and national safeguards for material control and accountability (MC and A), physical protection, and other proliferation barriers into the design and construction process for nuclear facilities. Implementing SBD is primarily a project management or project coordination challenge. This paper focuses specifically on the design process; the planning, definition, organization, coordination, scheduling and interaction of the safeguards experts and stakeholders as they participate in the design and construction of a nuclear facility. It delineates the steps in a nuclear facility design and construction project in order to provide the project context within which the safeguards design activities take place, describes the involvement of the safeguards experts in the design process, the nature of their analyses, interactions and decisions, and describes the documents created and how they are used. This report highlights the project context of safeguards activities, and identifies the safeguards community (nuclear facility operator, designer/builder, state regulator, SSAC and IAEA) must accomplish in order to implement SBD within the project.

Tracers and Tracer Testing: Design, Implementation, Tracer Selection, and Interpretation Methods

Energy Technology Data Exchange (ETDEWEB)

G. Michael Shook; Shannon L.; Allan Wylie

2004-01-01

Conducting a successful tracer test requires adhering to a set of steps. The steps include identifying appropriate and achievable test goals, identifying tracers with the appropriate properties, and implementing the test as designed. When these steps are taken correctly, a host of tracer test analysis methods are available to the practitioner. This report discusses the individual steps required for a successful tracer test and presents methods for analysis. The report is an overview of tracer technology; the Suggested Reading section offers references to the specifics of test design and interpretation.

Implementing GoF Design Patterns in BETA

DEFF Research Database (Denmark)

Agerbo, Ellen; Cornils, Aino

1998-01-01

In this paper it is investigated how well the Beta supports the Design Patterns presented in [GoF 95]. We go through the language constructs in Beta to show which prove especially useful when implementing these Design Patterns. It is a fact that several of the Design Patterns found in [GoF 95] can...... be implemented in a simpler and more straightforward way in Beta than in ordinary OO-languages. This leads us to consider whether it is true that the more advanced OO-language one uses, the more of these Design Patterns are included directly in the language constructs....

Adaptation and implementation of the TRACE code for transient analysis on designs of cooled lead fast reactors

International Nuclear Information System (INIS)

Lazaro, A.; Ammirabile, L.; Martorell, S.

2014-01-01

The article describes the changes implemented in the TRACE code to include thermodynamic tables of liquid lead drawn from experimental results. He then explains the process for developing a thermohydraulic model for the prototype ALFRED and analysis of a selection of representative transient conducted within the framework of international research projects. The study demonstrates the applicability of TRACE code to simulate designs of cooled lead fast reactors and exposes the high safety margins are there in this technology to accommodate the most severe transients identified in their security study. (Author)

Implementation of the structural integrity analysis for PWR primary components and piping

International Nuclear Information System (INIS)

Pellissier-Tanon, A.

1982-01-01

The trends on the definition, the assessment and the application of fracture strength evaluation methodology, which have arisen through experience in the design, construction and operation of French 900-MW plants are reviewed. The main features of the methodology proposed in a draft of Appendix ZG of the RCC-M code of practice for the design verification of fracture strength of primary components are presented. The research programs are surveyed and discussed from four viewpoints, first implementation of the LEFM analysis, secondly implementation of the fatigue crack propagation analysis, thirdly analysis of vessel integrity during emergency core cooling, and fourthly methodology for tear fracture analysis. (author)

Model-implementation fidelity in cyber physical system design

CERN Document Server

Fabre, Christian

2017-01-01

This book puts in focus various techniques for checking modeling fidelity of Cyber Physical Systems (CPS), with respect to the physical world they represent. The authors' present modeling and analysis techniques representing different communities, from very different angles, discuss their possible interactions, and discuss the commonalities and differences between their practices. Coverage includes model driven development, resource-driven development, statistical analysis, proofs of simulator implementation, compiler construction, power/temperature modeling of digital devices, high-level performance analysis, and code/device certification. Several industrial contexts are covered, including modeling of computing and communication, proof architectures models and statistical based validation techniques. Addresses CPS design problems such as cross-application interference, parsimonious modeling, and trustful code production Describes solutions, such as simulation for extra-functional properties, extension of cod...

A Conceptual Design and Analysis Method for Conventional and Unconventional Airplanes

NARCIS (Netherlands)

Elmendorp, R.J.M.; Vos, R.; La Rocca, G.

2014-01-01

A design method is presented that has been implemented in a software program to investigate the merits of conventional and unconventional transport airplanes. Design and analysis methods are implemented in a design tool capable of creating a conceptual design based on a set of toplevel requirements.

Practical iterative learning control with frequency domain design and sampled data implementation

CERN Document Server

Wang, Danwei; Zhang, Bin

2014-01-01

This book is on the iterative learning control (ILC) with focus on the design and implementation. We approach the ILC design based on the frequency domain analysis and address the ILC implementation based on the sampled data methods. This is the first book of ILC from frequency domain and sampled data methodologies. The frequency domain design methods offer ILC users insights to the convergence performance which is of practical benefits. This book presents a comprehensive framework with various methodologies to ensure the learnable bandwidth in the ILC system to be set with a balance between learning performance and learning stability. The sampled data implementation ensures effective execution of ILC in practical dynamic systems. The presented sampled data ILC methods also ensure the balance of performance and stability of learning process. Furthermore, the presented theories and methodologies are tested with an ILC controlled robotic system. The experimental results show that the machines can work in much h...

FPGA Design and Implementation of a Rangefinder

Directory of Open Access Journals (Sweden)

ALBU Răzvan-Daniel

2017-10-01

Full Text Available In this paper we will present the design and implementation of an ultrasonic non-contact rangefinder with FPGA. This rangefinder can be used in numerous applications, ranging from hardly accessible spaces to electromagnetically polluted environments. The experimental implementations proved to be accurate, portable, and easy to operate. Attributable to their programmable nature, FPGAs are an ideal fit for many dissimilar markets. Even though FPGAs used to be designated for lower speed and complexity designs in the past, today’s FPGAs effortlessly push the 500 MHz performance barricade. Since they bring features, such as embedded processors, DSP blocks, clocking, and high-speed serial at lower prices, FPGAs are a convincing alternative for almost any type of design.

Implementing plant design changes economically

International Nuclear Information System (INIS)

Seamans, L.D.

1994-01-01

Consumers Power Company, as is the case with most utilities, is challenged by the necessity to control non-modification design changes. At the Consumers' Palisades Nuclear Plant, the challenge was met by the establishment of a project team that developed an innovative comprehensive design control process called Functional Equivalent Substitution (FES). This paper describes: (1) the project team composition; (2) the process development methodology; and (3) the implementation results

Implementing E-Learning Designed Courses in General Education

Science.gov (United States)

Nuangchalerm, Prasart; Sakkumduang, Krissada; Uhwha, Suleepornn; Chansirisira, Pacharawit

2014-01-01

The aim of this study is to implement e-learning designed course for general education. The study employed 3 phases for developing e-learning course: contextual study, designing, and implementing. Two courses general education, 217 undergraduate students are participated the study. Research tool consisted of interview about e-learning form and…

Design, implementation and analysis of fully digital 1-D controllable multiscroll chaos

KAUST Repository

Mansingka, Abhinav S.; Radwan, Ahmed G.; Salama, Khaled N.

2011-01-01

This paper introduces the fully digital implementation of a 1-D multiscroll chaos generator based on a staircase nonlinearity in the 3rd-order jerk system using the Euler approximation. For the first time, digital design is exploited to provide real-time controllability of (i) number of scrolls, (ii) position in 1-D space, (iii) Euler step size and (iv) system parameter. The effect of variations in these fields on the maximum Lyapunov exponent (MLE) is analyzed. The system is implemented using Verilog HDL and synthesized on an Xilinx Virtex 4 FPGA, exhibiting area utilization less than 3.5% and high performance with experimentally verified throughput up to 3.33 Gbits/s. This fully digital system enables applications in modulation schemes and chaos-based cryptosystems without analog to digital conversion. © 2011 IEEE.

Design, implementation and analysis of fully digital 1-D controllable multiscroll chaos

KAUST Repository

Mansingka, Abhinav S.

2011-12-01

This paper introduces the fully digital implementation of a 1-D multiscroll chaos generator based on a staircase nonlinearity in the 3rd-order jerk system using the Euler approximation. For the first time, digital design is exploited to provide real-time controllability of (i) number of scrolls, (ii) position in 1-D space, (iii) Euler step size and (iv) system parameter. The effect of variations in these fields on the maximum Lyapunov exponent (MLE) is analyzed. The system is implemented using Verilog HDL and synthesized on an Xilinx Virtex 4 FPGA, exhibiting area utilization less than 3.5% and high performance with experimentally verified throughput up to 3.33 Gbits/s. This fully digital system enables applications in modulation schemes and chaos-based cryptosystems without analog to digital conversion. © 2011 IEEE.

Constraint Solver Techniques for Implementing Precise and Scalable Static Program Analysis

DEFF Research Database (Denmark)

Zhang, Ye

solver using unification we could make a program analysis easier to design and implement, much more scalable, and still as precise as expected. We present an inclusion constraint language with the explicit equality constructs for specifying program analysis problems, and a parameterized framework...... developers to build reliable software systems more quickly and with fewer bugs or security defects. While designing and implementing a program analysis remains a hard work, making it both scalable and precise is even more challenging. In this dissertation, we show that with a general inclusion constraint...... data flow analyses for C language, we demonstrate a large amount of equivalences could be detected by off-line analyses, and they could then be used by a constraint solver to significantly improve the scalability of an analysis without sacrificing any precision....

[Design and implementation of a competency-based curriculum for medical education].

Science.gov (United States)

Risco de Domínguez, Graciela

2014-01-01

Competency-based education is a form of designing, developing, delivering and documenting instruction based on a set of objectives and results that have been recommended for medical education. This article describes the steps in the process of designing and implementing a competency-based curriculum at a new medical school in a Peruvian university. We present the process followed including context analysis, mission design, the professional profile, the content and organization of the curriculum as well as the evaluation and resources for the training. Finally, issues and challenges faced, as well as lessons learned are summarized.

Design basis threat analysis and implementation of the physical protection system at Nuclear Facility of BATAN Yogyakarta

International Nuclear Information System (INIS)

Syarip

2005-01-01

An analysis to determine the design basis threat (DBT) and its follow-up through the implementation of physical protection system at the nuclear facility of BATAN Yogyakarta has been done. Methodology used for the analysis is based on the IAEA guidance for the development and maintenance of a DBT. Based on the analysis results, it can be concluded that the threat motivation is influenced by political situation (related to the government policy), criminal, sabotage and theft. The characteristics of threats are: not so well organized, terror, theft of materials information, involving insider (collusion), and intimidation to workers. Potential threat could from guests/students who take a practical job or laboratory exercise. Therefore, it is necessary to be anticipated the possibility and its impact of turmoil/demonstrators such as destruction of: lighting, road, fence, sabotage on the electric and communication lines, surrounding the Yogyakarta nuclear facility

Design and implementation of dynamic hybrid Honeypot network

Science.gov (United States)

Qiao, Peili; Hu, Shan-Shan; Zhai, Ji-Qiang

2013-05-01

The method of constructing a dynamic and self-adaptive virtual network is suggested to puzzle adversaries, delay and divert attacks, exhaust attacker resources and collect attacking information. The concepts of Honeypot and Honeyd, which is the frame of virtual Honeypot are introduced. The techniques of network scanning including active fingerprint recognition are analyzed. Dynamic virtual network system is designed and implemented. A virtual network similar to real network topology is built according to the collected messages from real environments in this system. By doing this, the system can perplex the attackers when Hackers attack and can further analyze and research the attacks. The tests to this system prove that this design can successfully simulate real network environment and can be used in network security analysis.

A Framework for Collaborative Networked Learning in Higher Education: Design & Analysis

Directory of Open Access Journals (Sweden)

Ghassan F. Issa

2014-06-01

Full Text Available This paper presents a comprehensive framework for building collaborative learning networks within higher educational institutions. This framework focuses on systems design and implementation issues in addition to a complete set of evaluation, and analysis tools. The objective of this project is to improve the standards of higher education in Jordan through the implementation of transparent, collaborative, innovative, and modern quality educational programs. The framework highlights the major steps required to plan, design, and implement collaborative learning systems. Several issues are discussed such as unification of courses and program of studies, using appropriate learning management system, software design development using Agile methodology, infrastructure design, access issues, proprietary data storage, and social network analysis (SNA techniques.

A methodology for the sustainable design and implementation strategy of CO2 utilization processes

DEFF Research Database (Denmark)

Roh, Kosan; Frauzem, Rebecca; Nguyen, Tuan B. H.

2016-01-01

design and analysis is discussed as only limited amounts of process data is available for determining the optimal processing path and in the third stage the issue of implementation strategy is considered. As examples, two CO2 utilization methods for methanol production, combined reforming and direct...... synthesis are considered. Methanol plants employing such methods are developed using synthesis-design and simulation tools and their evaluation indicators are calculated under various implementation strategies. It is demonstrated that integrating or replacing an existing conventional methanol plant...

Analysis and design of hybrid control systems

Energy Technology Data Exchange (ETDEWEB)

Malmborg, J.

1998-05-01

Different aspects of hybrid control systems are treated: analysis, simulation, design and implementation. A systematic methodology using extended Lyapunov theory for design of hybrid systems is developed. The methodology is based on conventional control designs in separate regions together with a switching strategy. Dynamics are not well defined if the control design methods lead to fast mode switching. The dynamics depend on the salient features of the implementation of the mode switches. A theorem for the stability of second order switching together with the resulting dynamics is derived. The dynamics on an intersection of two sliding sets are defined for two relays working on different time scales. The current simulation packages have problems modeling and simulating hybrid systems. It is shown how fast mode switches can be found before or during simulation. The necessary analysis work is a very small overhead for a modern simulation tool. To get some experience from practical problems with hybrid control the switching strategy is implemented in two different software environments. In one of them a time-optimal controller is added to an existing PID controller on a commercial control system. Successful experiments with this hybrid controller shows the practical use of the method 78 refs, 51 figs, 2 tabs

On HTML and XML based web design and implementation techniques

International Nuclear Information System (INIS)

Bezboruah, B.; Kalita, M.

2006-05-01

Web implementation is truly a multidisciplinary field with influences from programming, choosing of scripting languages, graphic design, user interface design, and database design. The challenge of a Web designer/implementer is his ability to create an attractive and informative Web. To work with the universal framework and link diagrams from the design process as well as the Web specifications and domain information, it is essential to create Hypertext Markup Language (HTML) or other software and multimedia to accomplish the Web's objective. In this article we will discuss Web design standards and the techniques involved in Web implementation based on HTML and Extensible Markup Language (XML). We will also discuss the advantages and disadvantages of HTML over its successor XML in designing and implementing a Web. We have developed two Web pages, one utilizing the features of HTML and the other based on the features of XML to carry out the present investigation. (author)

Implementing Sustainability Considerations in Packaging Design Curricula

NARCIS (Netherlands)

Mulder-Nijkamp, Maaike; de Koeijer, Bjorn; Torn, Isaäc Anthony Robbert-Jan

2018-01-01

This study aims to address the structured implementation of sustainability considerations in packaging design processes by proposing a teaching framework for design students. The framework builds upon a four-year research program which aims to deliver insights regarding the environmental burden

DESIGN AND IMPLEMENTATION OF CONVEYOR LINE SPEED ...

African Journals Online (AJOL)

DESIGN AND IMPLEMENTATION OF CONVEYOR LINE SPEED SYNCHRONISER FOR INDUSTRIAL CONTROL APPLICATIONS: A CASE STUDY OF ... in bottles.Therefore a Proportional Integral Derivative(PID) controller was designed to act as a speed synchronizer in order to eliminate the above mentioned problems.

Pro SQL Server 2012 relational database design and implementation

CERN Document Server

Davidson, Louis

2012-01-01

Learn effective and scalable database design techniques in a SQL Server environment. Pro SQL Server 2012 Relational Database Design and Implementation covers everything from design logic that business users will understand, all the way to the physical implementation of design in a SQL Server database. Grounded in best practices and a solid understanding of the underlying theory, Louis Davidson shows how to "get it right" in SQL Server database design and lay a solid groundwork for the future use of valuable business data. Gives a solid foundation in best practices and relational theory Covers

Effectiveness-implementation hybrid designs: combining elements of clinical effectiveness and implementation research to enhance public health impact.

Science.gov (United States)

Curran, Geoffrey M; Bauer, Mark; Mittman, Brian; Pyne, Jeffrey M; Stetler, Cheryl

2012-03-01

This study proposes methods for blending design components of clinical effectiveness and implementation research. Such blending can provide benefits over pursuing these lines of research independently; for example, more rapid translational gains, more effective implementation strategies, and more useful information for decision makers. This study proposes a "hybrid effectiveness-implementation" typology, describes a rationale for their use, outlines the design decisions that must be faced, and provides several real-world examples. An effectiveness-implementation hybrid design is one that takes a dual focus a priori in assessing clinical effectiveness and implementation. We propose 3 hybrid types: (1) testing effects of a clinical intervention on relevant outcomes while observing and gathering information on implementation; (2) dual testing of clinical and implementation interventions/strategies; and (3) testing of an implementation strategy while observing and gathering information on the clinical intervention's impact on relevant outcomes. The hybrid typology proposed herein must be considered a construct still in evolution. Although traditional clinical effectiveness and implementation trials are likely to remain the most common approach to moving a clinical intervention through from efficacy research to public health impact, judicious use of the proposed hybrid designs could speed the translation of research findings into routine practice.

Implementing Target Value Design.

Science.gov (United States)

Alves, Thais da C L; Lichtig, Will; Rybkowski, Zofia K

2017-04-01

An alternative to the traditional way of designing projects is the process of target value design (TVD), which takes different departure points to start the design process. The TVD process starts with the client defining an allowable cost that needs to be met by the design and construction teams. An expected cost in the TVD process is defined through multiple interactions between multiple stakeholders who define wishes and others who define ways of achieving these wishes. Finally, a target cost is defined based on the expected profit the design and construction teams are expecting to make. TVD follows a series of continuous improvement efforts aimed at reaching the desired goals for the project and its associated target value cost. The process takes advantage of rapid cycles of suggestions, analyses, and implementation that starts with the definition of value for the client. In the traditional design process, the goal is to identify user preferences and find solutions that meet the needs of the client's expressed preferences. In the lean design process, the goal is to educate users about their values and advocate for a better facility over the long run; this way owners can help contractors and designers to identify better solutions. This article aims to inform the healthcare community about tools and techniques commonly used during the TVD process and how they can be used to educate and support project participants in developing better solutions to meet their needs now as well as in the future.

[Design and implementation of online statistical analysis function in information system of air pollution and health impact monitoring].

Science.gov (United States)

Lü, Yiran; Hao, Shuxin; Zhang, Guoqing; Liu, Jie; Liu, Yue; Xu, Dongqun

2018-01-01

To implement the online statistical analysis function in information system of air pollution and health impact monitoring, and obtain the data analysis information real-time. Using the descriptive statistical method as well as time-series analysis and multivariate regression analysis, SQL language and visual tools to implement online statistical analysis based on database software. Generate basic statistical tables and summary tables of air pollution exposure and health impact data online; Generate tendency charts of each data part online and proceed interaction connecting to database; Generate butting sheets which can lead to R, SAS and SPSS directly online. The information system air pollution and health impact monitoring implements the statistical analysis function online, which can provide real-time analysis result to its users.

Protocol design and implementation using formal methods

NARCIS (Netherlands)

van Sinderen, Marten J.; Ferreira Pires, Luis; Pires, L.F.; Vissers, C.A.

1992-01-01

This paper reports on a number of formal methods that support correct protocol design and implementation. These methods are placed in the framework of a design methodology for distributed systems that was studied and developed within the ESPRIT II Lotosphere project (2304). The paper focuses on

Making daylighting work. Learning from failures to improve the design and implementation process

Energy Technology Data Exchange (ETDEWEB)

Vaidya, Prasad; McDougall, Tom; Steinbock, Jason; Douglas, James; Eijadi, David [The Weidt Group, Berkeley, CA (United States)

2005-07-01

Daylighting, hailed as a cornerstone of sustainable building design, is the primary passive solar design strategy in commercial buildings. It has the potential to significantly reduce lighting energy, which can be 40% or more of the energy cost of a commercial building. We have found that projects with daylighting often do not provide the expected energy savings. In a risk-averse construction industry, even limited failures can dramatically slow the advance of valid technologies. There are numerous reasons for failure: natural light sources are complex and vary through the day and year; implementation requires coordination between different building design and construction trades; the documentation and specification of the controls equipment is often inadequate; and calibration after installation is rarely done well and can be confusing and time consuming. In this paper, we provide four case studies as representative examples where daylighting did not deliver the expected energy savings. We identify the primary modes of failure and provide a template for each mode for easier problem resolution in the future. Through a detailed analysis of the case studies, we identify problem areas in the design and implementation process; we propose a more generalized solution set for design steps, documentation requirements and implementation checks that increase the chances of success.

Design and Implementation of the MESH Services Platform

NARCIS (Netherlands)

Batteram, Harold J.; Bakker, John-Luc; Verhoosel, Jack P.C.; Diakov, N.K.

1999-01-01

Industry acceptance of TINA (Telecommunications Information Networking Architecture) will depend heavily on both the evaluation of working systems that implement this architecture, and on the experiences obtained during the design and implementation of these systems. During the MESH' (Multimedia

Distributed learning process: principles of design and implementation

Directory of Open Access Journals (Sweden)

G. N. Boychenko

2016-01-01

Full Text Available At the present stage, broad information and communication technologies (ICT usage in educational practices is one of the leading trends of global education system development. This trend has led to the instructional interaction models transformation. Scientists have developed the theory of distributed cognition (Salomon, G., Hutchins, E., and distributed education and training (Fiore, S. M., Salas, E., Oblinger, D. G., Barone, C. A., Hawkins, B. L.. Educational process is based on two separated in time and space sub-processes of learning and teaching which are aimed at the organization of fl exible interactions between learners, teachers and educational content located in different non-centralized places.The purpose of this design research is to fi nd a solution for the problem of formalizing distributed learning process design and realization that is signifi cant in instructional design. The solution to this problem should take into account specifi cs of distributed interactions between team members, which becomes collective subject of distributed cognition in distributed learning process. This makes it necessary to design roles and functions of the individual team members performing distributed educational activities. Personal educational objectives should be determined by decomposition of team objectives into functional roles of its members with considering personal and learning needs and interests of students.Theoretical and empirical methods used in the study: theoretical analysis of philosophical, psychological, and pedagogical literature on the issue, analysis of international standards in the e-learning domain; exploration on practical usage of distributed learning in academic and corporate sectors; generalization, abstraction, cognitive modelling, ontology engineering methods.Result of the research is methodology for design and implementation of distributed learning process based on the competency approach. Methodology proposed by

The design and implementation of the LLNL gigabit testbed

Energy Technology Data Exchange (ETDEWEB)

Garcia, D. [Lawrence Livermore National Labs., CA (United States)

1994-12-01

This paper will look at the design and implementation of the LLNL Gigabit testbed (LGTB), where various high speed networking products, can be tested in one environment. The paper will discuss the philosophy behind the design of and the need for the testbed, the tests that are performed in the testbed, and the tools used to implement those tests.

Design and implementation of organic LED-based displays for signage application

Science.gov (United States)

Sharma, Pratibha; Kwok, Harry

2006-06-01

Organic light-emitting diodes (OLEDs) have been utilized successfully for various applications such as microdisplays in cell-phones and digital cameras. However, the application of OLEDs for large area signage displays has not yet been established. This paper presents novel design techniques for implementing OLEDs as light sources for signage application. The designs are examined on the basis of signage uniformity, cost and manufacturing complexity. Advantages and limitations of each design are described. It is determined that a trade-off is required to choose a design for implementation. After evaluation and comparison of the designs, the most optimal design is chosen and implemented. Measurement results with the optimal design are described.

Sensitivity analysis and design optimization through automatic differentiation

International Nuclear Information System (INIS)

Hovland, Paul D; Norris, Boyana; Strout, Michelle Mills; Bhowmick, Sanjukta; Utke, Jean

2005-01-01

Automatic differentiation is a technique for transforming a program or subprogram that computes a function, including arbitrarily complex simulation codes, into one that computes the derivatives of that function. We describe the implementation and application of automatic differentiation tools. We highlight recent advances in the combinatorial algorithms and compiler technology that underlie successful implementation of automatic differentiation tools. We discuss applications of automatic differentiation in design optimization and sensitivity analysis. We also describe ongoing research in the design of language-independent source transformation infrastructures for automatic differentiation algorithms

On implementation of the extended interior penalty function. [optimum structural design

Science.gov (United States)

Cassis, J. H.; Schmit, L. A., Jr.

1976-01-01

The extended interior penalty function formulation is implemented. A rational method for determining the transition between the interior and extended parts is set forth. The formulation includes a straightforward method for avoiding design points with some negative components, which are physically meaningless in structural analysis. The technique, when extended to problems involving parametric constraints, can facilitate closed form integration of the penalty terms over the most important parts of the parameter interval. The method lends itself well to the use of approximation concepts, such as design variable linking, constraint deletion and Taylor series expansions of response quantities in terms of design variables. Examples demonstrating the algorithm, in the context of planar orthogonal frames subjected to ground motion, are included.

Design and Implementation of an Extensible Learner-Adaptive Environment

Directory of Open Access Journals (Sweden)

Kiyoshi Nakabayashi

2010-09-01

Full Text Available This paper describes the design and implementation of a flexible architecture that is capable of extending the functions of a learner-adaptive self-learning environment. A “courseware object”, which is a program module that is used to implement various educational functionalities, has been newly introduced to ensure both function extensibility as well as content reusability. A prototype system was designed and implemented to investigate the feasibility of the proposed architecture and to identify the core behavior and interaction schema of courseware objects. The results from this trial indicated that several learner-adaptive functionalities including the SCORM 2004 standard specifications will be able to be successfully implemented into the proposed architecture.

Design and implementation of software for automated quality control and data analysis for a complex LC/MS/MS assay for urine opiates and metabolites.

Science.gov (United States)

Dickerson, Jane A; Schmeling, Michael; Hoofnagle, Andrew N; Hoffman, Noah G

2013-01-16

Mass spectrometry provides a powerful platform for performing quantitative, multiplexed assays in the clinical laboratory, but at the cost of increased complexity of analysis and quality assurance calculations compared to other methodologies. Here we describe the design and implementation of a software application that performs quality control calculations for a complex, multiplexed, mass spectrometric analysis of opioids and opioid metabolites. The development and implementation of this application improved our data analysis and quality assurance processes in several ways. First, use of the software significantly improved the procedural consistency for performing quality control calculations. Second, it reduced the amount of time technologists spent preparing and reviewing the data, saving on average over four hours per run, and in some cases improving turnaround time by a day. Third, it provides a mechanism for coupling procedural and software changes with the results of each analysis. We describe several key details of the implementation including the use of version control software and automated unit tests. These generally useful software engineering principles should be considered for any software development project in the clinical lab. Copyright © 2012 Elsevier B.V. All rights reserved.

Designing, Implementing, and Evaluating Secure Web Browsers

Science.gov (United States)

Grier, Christopher L.

2009-01-01

Web browsers are plagued with vulnerabilities, providing hackers with easy access to computer systems using browser-based attacks. Efforts that retrofit existing browsers have had limited success since modern browsers are not designed to withstand attack. To enable more secure web browsing, we design and implement new web browsers from the ground…

Design Based Research: the Way of Developing and Implementing Educational Innovation

Directory of Open Access Journals (Sweden)

Tina Štemberger

2016-11-01

Full Text Available The appropriate implementation of innovation is a crucial factor in improving educational practice. In the implementation process, there is, however, often a lack of interaction between designers and practitioners that would enable the latter to become competent enough to implement theoretical knowledge into practice and to have an ongoing support from designers. Design-based research is based on close cooperation between researchers, practitioners and designers which consequently allows greater integration of research and practice in education. In the present paper, the beginnings, development, basic characteristics, advantages, disadvantages and the research process of design-based research are reviewed and an example of design-based research is presented.

Change Impact Analysis of Crosscutting in Software Architectural Design

NARCIS (Netherlands)

van den Berg, Klaas

2006-01-01

Software architectures should be amenable to changes in user requirements and implementation technology. The analysis of the impact of these changes can be based on traceability of architectural design elements. Design elements have dependencies with other software artifacts but also evolve in time.

Design and Implementation of an HCI course for MIS students – Some lessons

Directory of Open Access Journals (Sweden)

Rachel Or-Bach

2015-06-01

Full Text Available Courses on Human Computer Interaction (HCI largely differ in the conception of the role of the course in the program, in the topics to be included, in emphases, in the instructional strategies that are employed, and more. This paper describes the design and implementation of a HCI course for students of the Management Information Systems department in our college. Students’ intermediate and final homework assignments were analyzed to provide feedback for the course design. Quantitative analysis showed high correlation between the quality of the requirement analysis performed by the students and the quality of the final interface prototype, and also that the quality of design alternatives that were considered by the students can be a good predictor for the quality of the overall interface design. Qualitative analysis of students’ submissions showed the need for practicing skills required in users’ studies, especially conducting interviews and observations. Implications from these and other findings are discussed.

FoamVis, A Visualization System for Foam Research: Design and Implementation

Directory of Open Access Journals (Sweden)

Dan R. Lipsa

2015-03-01

Full Text Available Liquid foams are used in areas such as mineral separation, oil recovery, food and beverage production, sanitation and fire fighting. To improve the quality of products and the efficiency of processes in these areas, foam scientists wish to understand and control foam behaviour. To this end, foam scientists have used foam simulations to model foam behaviour; however, analysing these simulations presents difficult challenges. We describe the main foam research challenges and present the design of FoamVis, the only existing visualization, exploration and analysis application created to address them. We describe FoamVis’ main features, together with relevant design and implementation notes. Our goal is to provide a global overview and individual feature implementation details that would allow a visualization scientist to extend the FoamVis system with new algorithms and adapt it to new requirements. The result is a detailed presentation of the software that is not provided in previous visualization research papers.

Does Implementation Follow Design? A Case Study of a Workplace Health Promotion Program Using the 4-S Program Design and the PIPE Impact Metric Evaluation Models.

Science.gov (United States)

Äikäs, Antti Hermanni; Pronk, Nicolaas P; Hirvensalo, Mirja Hannele; Absetz, Pilvikki

2017-08-01

The aim of this study was to describe the content of a multiyear market-based workplace health promotion (WHP) program and to evaluate design and implementation processes in a real-world setting. Data was collected from the databases of the employer and the service provider. It was classified using the 4-S (Size, Scope, Scalability, and Sustainability) and PIPE Impact Metric (Penetration, Implementation) models. Data analysis utilized both qualitative and quantitative methods. Program design covered well the evidence-informed best practices except for clear path toward sustainability, cooperation with occupational health care, and support from middle-management supervisors. The penetration rate among participants was high (99%) and majority (81%) of services were implemented as designed. Study findings indicate that WHP market would benefit the use of evidence-based design principles and tendentious decisions to anticipate a long-term implementation process already during the planning phase.

An Underlay Communication Channel for 5G Cognitive Mesh Networks: Packet Design, Implementation, Analysis, and Experimental Results

Energy Technology Data Exchange (ETDEWEB)

Tarek Haddadin; Stephen Andrew Laraway; Arslan Majid; Taylor Sibbett; Daryl Leon Wasden; Brandon F Lo; Lloyd Landon; David Couch; Hussein Moradi; Behrouz Farhang-Boroujeny

2016-04-01

This paper proposes and presents the design and implementation of an underlay communication channel (UCC) for 5G cognitive mesh networks. The UCC builds its waveform based on filter bank multicarrier spread spectrum (FB-MCSS) signaling. The use of this novel spread spectrum signaling allows the device-to-device (D2D) user equipments (UEs) to communicate at a level well below noise temperature and hence, minimize taxation on macro-cell/small-cell base stations and their UEs in 5G wireless systems. Moreover, the use of filter banks allows us to avoid those portions of the spectrum that are in use by macro-cell and small-cell users. Hence, both D2D-to-cellular and cellular-to-D2D interference will be very close to none. We propose a specific packet for UCC and develop algorithms for packet detection, timing acquisition and tracking, as well as channel estimation and equalization. We also present the detail of an implementation of the proposed transceiver on a software radio platform and compare our experimental results with those from a theoretical analysis of our packet detection algorithm.

Incomplete by Design: A Study of a Design-in-Use Approach to Systems Implementation

DEFF Research Database (Denmark)

Torkilsheyggi, Arnvør Martinsdóttir á; Hertzum, Morten

2017-01-01

In complex work settings the design of a system, including the associated work practices, must be completed in use to derive full benefit from the system. We investigate the introduction of an electronic whiteboard throughout a hospital in which management substituted a local design-in-use process......, driven by super users, for a centrally organized implementation process. The aim of this study is to investigate the design-in-use approach to systems implementation with respect to the tension that ensued between hospital management’s expectations to the process and the goals pursued in the individual...

Design Based Research: The Way of Developing and Implementing

Science.gov (United States)

Štemberger, Tina; Cencic, Majda

2016-01-01

The appropriate implementation of innovation is a crucial factor in improving educational practice. In the implementation process, there is, however, often a lack of interaction between designers and practitioners that would enable the latter to become competent enough to implement theoretical knowledge into practice and to have an ongoing support…

The design and implementation of BESIII online test farm

International Nuclear Information System (INIS)

Liu Zhixu; Liu Feng; Zhu Kejun; Li Fei

2004-01-01

Computing Farms are used widely in the field of high-energy physics. As the increase of performance and the relative lower price, with the open source operating system Linux and many other free software available, PC is playing a more and more important role in the computing farms. In this letter, the design and implementation of the BESIII online data acquisition system test farm with PC, Linux and other free software are presented. This system can be ported to the real online system easily. It can be applied to other purpose farm, such as a physics analysis farm, too. (authors)

A quantitative analysis study on the implementation of partnering in the design and build construction project

Science.gov (United States)

Halil, F. M.; Nasir, N. M.; Shukur, A. S.; Hashim, H.

2018-02-01

Design and Build construction project involved the biggest scale of the cost of investment as compared to the traditional approach. In Design and Build, the client hires a design professional that will design according to the client’s need and specification. This research aim is to explore the concept of partnering implementation practiced in the design and build procurement approach. Therefore, the selection of design professionals such as Contractors and consultants in the project is crucial to ensure the successful project completion on time, cost, and quality. The methodology adopted using quantitative approach. Administration of the questionnaire was distributed to the public client by using postal survey. Outcomes of the results, the public clients agreed that project management capabilities and commitment to budget as a crucial element of partnering from the design professional in design and build construction project.

REDD+ in West Africa: Politics of Design and Implementation in Ghana and Nigeria

Directory of Open Access Journals (Sweden)

Adeniyi P. Asiyanbi

2017-03-01

Full Text Available This paper analyses the design and implementation of Reducing Emissions from Deforestation and Degradation, conserving and enhancing forest carbon stocks, and sustainably managing forests (REDD+ in the West African region, an important global biodiversity area. Drawing on in-depth interviews, analysis of policy documents and observation of everyday activities, we sought to understand how REDD+ has been designed and implemented in Nigeria and Ghana. We draw on political ecology to examine how, and why REDD+ takes the form it does in these countries. We structure our discussion around three key dimensions that emerged as strong areas of common emphasis in our case studies—capacity building, carbon visibility, and property rights. First, we show that while REDD+ design generally foregrounds an ostensible inclusionary politics, its implementation is driven through various forms of exclusion. This contradictory inclusion–exclusion politics, which is partly emblematic of the neoliberal provenance of the REDD+ policy, is also a contingent reality and a strategy for navigating complexities and pursuing certain interests. Second, we show that though the emergent foci of REDD+ implementation in our case studies align with global REDD+ expectations, they still manifest as historically and geographically contingent processes that reflect negotiated and contested relations among actors that constitute the specific national circumstance of each country. We conclude by reflecting on the importance of our findings for understanding REDD+ projects in other tropical countries.

Challenges of implementation and implementation research: Learning from an intervention study designed to improve tumor registry reporting

Directory of Open Access Journals (Sweden)

Ann Scheck McAlearney

2016-08-01

Full Text Available Objectives: Implementation of interventions designed to improve the quality of medical care often proceeds differently from what is planned. Improving existing conceptual models to better understand the sources of these differences can help future projects avoid these pitfalls and achieve desired effectiveness. To inform an adaptation of an existing theoretical model, we examined unanticipated changes that occurred in an intervention designed to improve reporting of adjuvant therapies for breast cancer patients at a large, urban academic medical center. Methods: Guided by the complex innovation implementation conceptual framework, our study team observed and evaluated the implementation of an intervention designed to improve reporting to a tumor registry. Findings were assessed against the conceptual framework to identify boundary conditions and modifications that could improve implementation effectiveness. Results: The intervention successfully increased identification of the managing medical oncologist and treatment reporting. During implementation, however, unexpected external challenges including hospital acquisitions of community practices and practices’ responses to government incentives to purchase electronic medical record systems led to unanticipated changes and associated threats to implementation. We present a revised conceptual model that incorporates the sources of these unanticipated challenges. Conclusion: This report of our experience highlights the importance of monitoring implementation over time and accounting for changes that affect both implementation and measurement of intervention impact. In this article, we use our study to examine the challenges of implementation research in health care, and our experience can help future implementation efforts.

Advanced design and characterization methodologies for memory-aware CMOS power-amplifier implementation

Directory of Open Access Journals (Sweden)

M. Schleyer

2017-09-01

Full Text Available This paper reports on an effective root-cause analysis method of memory effects in power amplifiers, as well as introduces compensation techniques on a circuit design level. Despite conventional memory-effect approaches, the discussed method uses a two-tone scan over a wide operation and modulation range. This enables an in-depth study of physical causes and helps to implement compensation techniques at design stage. On the one hand, this circuit investigation is optimized using an automated SystemC model parametrized with real device and measurement values. Hence, computation time is widely reduced which shortens design cycles. On the other hand, the implementation of the derived circuit compensation means will reduce the complexity of digital pre-distortion due to a reduced memory-effect induced AM/AM and AM/PM hysteresis. The approach is demonstrated on a 65 nm CMOS power amplifier with an OIP1 of 27 dBm and a PAE of over 30 % using WCDMA and LTE signals. In fact, mismatch could be reduced by more than 8 %.

DESIGN PACKAGE 1E SYSTEM SAFETY ANALYSIS

Energy Technology Data Exchange (ETDEWEB)

M. Salem

1995-06-23

The purpose of this analysis is to systematically identify and evaluate hazards related to the Yucca Mountain Project Exploratory Studies Facility (ESF) Design Package 1E, Surface Facilities, (for a list of design items included in the package 1E system safety analysis see section 3). This process is an integral part of the systems engineering process; whereby safety is considered during planning, design, testing, and construction. A largely qualitative approach was used since a radiological System Safety Analysis is not required. The risk assessment in this analysis characterizes the accident scenarios associated with the Design Package 1E structures/systems/components(S/S/Cs) in terms of relative risk and includes recommendations for mitigating all identified risks. The priority for recommending and implementing mitigation control features is: (1) Incorporate measures to reduce risks and hazards into the structure/system/component design, (2) add safety devices and capabilities to the designs that reduce risk, (3) provide devices that detect and warn personnel of hazardous conditions, and (4) develop procedures and conduct training to increase worker awareness of potential hazards, on methods to reduce exposure to hazards, and on the actions required to avoid accidents or correct hazardous conditions.

Implementation of quality by design toward processing of food products.

Science.gov (United States)

Rathore, Anurag S; Kapoor, Gautam

2017-05-28

Quality by design (QbD) is a systematic approach that begins with predefined objectives and emphasizes product and process understanding and process control. It is an approach based on principles of sound science and quality risk management. As the food processing industry continues to embrace the idea of in-line, online, and/or at-line sensors and real-time characterization for process monitoring and control, the existing gaps with regard to our ability to monitor multiple parameters/variables associated with the manufacturing process will be alleviated over time. Investments made for development of tools and approaches that facilitate high-throughput analytical and process development, process analytical technology, design of experiments, risk analysis, knowledge management, and enhancement of process/product understanding would pave way for operational and economic benefits later in the commercialization process and across other product pipelines. This article aims to achieve two major objectives. First, to review the progress that has been made in the recent years on the topic of QbD implementation in processing of food products and second, present a case study that illustrates benefits of such QbD implementation.

Implementing risk-informed life-cycle design

International Nuclear Information System (INIS)

Hill, Ralph S.

2009-01-01

This paper describes a design process based on risk-informed probabilistic design methodologies that cover a facility's life-cycle from start of conceptual design through decontamination and decommissioning. The concept embodies use of probabilistic risk assessments to establish target reliabilities for facility systems and components. The target reliabilities are used for system based code margin exchange and performance simulation analyses to optimize design over all phases (design, construction, operation and decommissioning) of a facility's life-cycle. System based code margin exchange reduces excessive level of construction margins for passive components to appropriate levels resulting in a more flexible structure of codes and standards that improves facility reliability and cost. System and subsystem simulation analyses determine the optimum combination of initial system and component construction reliability, maintenance frequency, and inspection frequency for both active and passive components. The paper includes a description of these risk-informed life-cycle design processes, a summary of work being done, and a discussion of additional work needed to implement the process.

Toxic release consequence analysis tool (TORCAT) for inherently safer design plant

International Nuclear Information System (INIS)

Shariff, Azmi Mohd; Zaini, Dzulkarnain

2010-01-01

Many major accidents due to toxic release in the past have caused many fatalities such as the tragedy of MIC release in Bhopal, India (1984). One of the approaches is to use inherently safer design technique that utilizes inherent safety principle to eliminate or minimize accidents rather than to control the hazard. This technique is best implemented in preliminary design stage where the consequence of toxic release can be evaluated and necessary design improvements can be implemented to eliminate or minimize the accidents to as low as reasonably practicable (ALARP) without resorting to costly protective system. However, currently there is no commercial tool available that has such capability. This paper reports on the preliminary findings on the development of a prototype tool for consequence analysis and design improvement via inherent safety principle by utilizing an integrated process design simulator with toxic release consequence analysis model. The consequence analysis based on the worst-case scenarios during process flowsheeting stage were conducted as case studies. The preliminary finding shows that toxic release consequences analysis tool (TORCAT) has capability to eliminate or minimize the potential toxic release accidents by adopting the inherent safety principle early in preliminary design stage.

Mindfully implementing simulation tools for supporting pragmatic design inquiries

NARCIS (Netherlands)

Hartmann, Timo; olde Scholtenhuis, Léon Luc; Zerjav, Vedran; Champlin, Carissa J

2015-01-01

Based upon a conceptualization of the engineering design process as pragmatic inquiry, this paper introduces a framework for supporting designers and design managers with a better understanding of the trade-offs required for a successful implementation of simulation tools. This framework contributes

Implementation of the Westinghouse nuclear design system for incore fuel management analysis

International Nuclear Information System (INIS)

Hoskins, K.C.; Kichty, M.J.; Liu, Y.S.; Nguyen, T.Q.

1990-01-01

Development of the Westinghouse Advanced Nuclear Design System, which includes PHOENIX-P and ANC, has been continued to improve the efficiency, reliability, accuracy, and flexibility of models. The new codes ALPHA and PHIRE provide complete automation and interface functions for PHOENIX-P, ANC, and other codes. PHOENIX-P has been modified to generate data for ANC based on single or multi-assembly calculations. ANC has several enhancements, including improved pin power reconstruction, automated 2D model generation, and rod burnup prediction capability. The excellent performance of PHOENIX-P/ANC models is demonstrated by the results of over 30 models covering the range of Westinghouse designs. This Nuclear Design System is now the standard Westinghouse methodology for core design and analysis

Inclusive design in the implementation of projects for schools modernization in Portugal - case studies.

Science.gov (United States)

Lopes, Lígia; Aguiar, Carlos; da Silva, Fernando Moreira

2012-01-01

The Project for Schools Modernization taking place in Portugal, with an estimated total investment of 2450 million for the intervention in the first 205 schools, provide the reclassification of 332 secondary schools by 2015. One of the questions we can pose is if the authorities and the teams of architects selected to design these schools considered fundamental for the correctness of architectural barriers within the school and its accessibility the implementation of standards and principles of inclusion of children/teenagers with special needs within their school environment. As most of the projects are already being implemented, the main aim of this paper is to present the outcomes of a comparative analysis and synthesis of six schools located in the northern part of the country. This analysis occurs from the of Participatory Design perspective which appeals to the experience of the disable children to look (or evaluate) the negative and positive factors in terms of physical space, interpreted by inclusive design rules and orientations. Therefore, the evaluation of schools modernization project, and its discussion, is central for the understanding how these children are addressed in projects which are directed at them.

Design and implementation of smart web sensors

Directory of Open Access Journals (Sweden)

Jevtić Nenad J.

2015-01-01

Full Text Available This paper presents the design and implementation of the smart web sensors. The paper briefly describes the concept of automatic configuration based on electronic specifications in industrial measurement and control systems as well as in distributed systems based on the OGC SWE family of standards. The model for the implementation of Plug and Play sensor in accordance with the IEEE 1451 family of standards is analyzed in detail. Special attention is paid to the network connectivity of analog sensors in accordance with IEEE 1451.4. The practical implementation of the 1451.4 compatible network processor for RTD temperature sensors and adequate software support for 1451.4 TEDS generation, are included in the paper.

Enabling Rapid and Robust Structural Analysis During Conceptual Design

Science.gov (United States)

Eldred, Lloyd B.; Padula, Sharon L.; Li, Wu

2015-01-01

This paper describes a multi-year effort to add a structural analysis subprocess to a supersonic aircraft conceptual design process. The desired capabilities include parametric geometry, automatic finite element mesh generation, static and aeroelastic analysis, and structural sizing. The paper discusses implementation details of the new subprocess, captures lessons learned, and suggests future improvements. The subprocess quickly compares concepts and robustly handles large changes in wing or fuselage geometry. The subprocess can rank concepts with regard to their structural feasibility and can identify promising regions of the design space. The automated structural analysis subprocess is deemed robust and rapid enough to be included in multidisciplinary conceptual design and optimization studies.

Design and implementation of SFQ programmable clock generators

International Nuclear Information System (INIS)

Ito, M.; Nakajima, N.; Fujiwara, K.; Yoshikawa, N.; Fujimaki, A.; Terai, H.; Yorozu, S.

2004-01-01

We have designed and implemented an SFQ programmable clock generator (PCG), which can generate the variable number of SFQ pulses according to its internal state. The PCG is composed of an SFQ ring oscillator, a control circuit which counts up the number of SFQ pulses and stops the operation of the ring oscillator, and a decoder which defines the initial state of the control circuit. The PCG can generate the variable number of SFQ pulses ranging from 2 to 2 N , where N is the number of T flip-flops in the control circuit. The oscillation frequency of the PCG is designed to be ranging from 6.2 to 18.8 GHz. In this study, we have implemented a PCG generating SFQ pulses ranging from 2 to 2 4 using a cell-based design methodology and confirmed its correct functionality

Applying Universal Design to Disability Service Provision: Outcome Analysis of a Universal Design (UD) Audit

Science.gov (United States)

Beck, Tanja; Diaz del Castillo, Patricia; Fovet, Frederic; Mole, Heather; Noga, Brodie

2014-01-01

This article presents out an outcome analysis of a Universal Design (UD) audit to the various professional facets of a disability service (DS) provider's office on a large North American campus. The context of the audit is a broad campus-wide drive to implement Universal Design for Learning (UDL) in teaching practices. In an effort for consistency…

SIFT - Design and analysis of a fault-tolerant computer for aircraft control. [Software Implemented Fault Tolerant systems

Science.gov (United States)

Wensley, J. H.; Lamport, L.; Goldberg, J.; Green, M. W.; Levitt, K. N.; Melliar-Smith, P. M.; Shostak, R. E.; Weinstock, C. B.

1978-01-01

SIFT (Software Implemented Fault Tolerance) is an ultrareliable computer for critical aircraft control applications that achieves fault tolerance by the replication of tasks among processing units. The main processing units are off-the-shelf minicomputers, with standard microcomputers serving as the interface to the I/O system. Fault isolation is achieved by using a specially designed redundant bus system to interconnect the processing units. Error detection and analysis and system reconfiguration are performed by software. Iterative tasks are redundantly executed, and the results of each iteration are voted upon before being used. Thus, any single failure in a processing unit or bus can be tolerated with triplication of tasks, and subsequent failures can be tolerated after reconfiguration. Independent execution by separate processors means that the processors need only be loosely synchronized, and a novel fault-tolerant synchronization method is described.

Maternal and neonatal implementation for equitable systems. A study design paper.

Science.gov (United States)

Ekirapa-Kiracho, Elizabeth; Tetui, Moses; Bua, John; Muhumuza Kananura, Rornald; Waiswa, Peter; Makumbi, Fred; Atuyambe, Lynn; Ajeani, Judith; George, Asha; Mutebi, Aloysuis; Kakaire, Ayub; Namazzi, Gertrude; Paina, Ligia; Namusoke Kiwanuka, Suzanne

2017-08-01

Evidence on effective ways of improving maternal and neonatal health outcomes is widely available. The challenge that most low-income countries grapple with is implementation at scale and sustainability. The study aimed at improving access to quality maternal and neonatal health services in a sustainable manner by using a participatory action research approach.  The  study consisted of a quasi-experimental design, with a participatory action research approach to implementation in three rural districts (Pallisa, Kibuku and Kamuli) in Eastern Uganda. The intervention had two main components; namely, community empowerment for comprehensive birth preparedness, and health provider and management capacity-building. We collected data using both quantitative and qualitative methods using household and facility-level structured surveys, record reviews, key informant interviews and focus group discussions. We purposively selected the participants for the qualitative data collection, while for the surveys we interviewed all eligible participants in the sampled households and health facilities. Descriptive statistics were used to describe the data, while the difference in difference analysis was used to measure the effect of the intervention. Qualitative data were analysed using thematic analysis. This study was implemented to generate evidence on how to increase access to quality maternal and newborn health services in a sustainable manner using a multisectoral participatory  approach.

Critical Race Design: An Emerging Methodological Approach to Anti-Racist Design and Implementation Research

Science.gov (United States)

Khalil, Deena; Kier, Meredith

2017-01-01

This article is about introducing Critical Race Design (CRD), a research methodology that centers race and equity at the nucleus of educational opportunities by design. First, the authors define design-based implementation research (DBIR; Penuel, Fishman, Cheng, & Sabelli, 2011) as an equity-oriented education research methodology where…

Maximizing Return From Sound Analysis and Design Practices

International Nuclear Information System (INIS)

Bramlette, J.D.

2002-01-01

With today's tightening budgets computer applications must provide ''true'' long-term benefit to the company. Businesses are spending large portions of their budgets ''Re-Engineering'' old systems to take advantage of ''new'' technology. But what they are really getting is simply a new interface implementing the same incomplete or poor defined requirements as before. ''True'' benefit can only be gained if sound analysis and design practices are used. WHAT data and processes are required of a system is not the same as HOW the system will be implemented within a company. It is the System Analyst's responsibility to understand the difference between these two concepts. The paper discusses some simple techniques to be used during the Analysis and Design phases of projects, as well as the information gathered and recorded in each phase and how it is transformed between these phases. The paper also covers production application generated using Oracle Designer. Applying these techniques to ''real world'' problems, the applications will meet the needs for today's business and adapt easily to ever-changing business environments

Key influences in the design and implementation of mental health information systems in Ghana and South Africa.

Science.gov (United States)

Ahuja, S; Mirzoev, T; Lund, C; Ofori-Atta, A; Skeen, S; Kufuor, A

2016-01-01

Strengthening of mental health information systems (MHIS) is essential to monitor and evaluate mental health services in low and middle-income countries. While research exists assessing wider health management information systems, there is limited published evidence exploring the design and implementation of MHIS in these settings. This paper aims to identify and assess the key factors affecting the design and implementation of MHIS, as perceived by the key stakeholders in Ghana and South Africa. We report findings from the Mental Health and Poverty Project, a 5-year research programme implemented within four African countries. The MHIS strengthening in South Africa and Ghana included two related components: intervention and research. The intervention component aimed to strengthen MHIS in the two countries, and the research component aimed to document interventions in each country, including the key influences. Data were collected using semi structured interviews with key stakeholders and reviews of key documents and secondary data from the improved MHIS. We analyzed the qualitative data using a framework approach. Key components of the MHIS intervention involved the introduction of a redesigned patient registration form, entry into computers for analysis every 2 months by clinical managerial staff, and utilization of data in hospital management meetings in three psychiatric hospitals in Ghana; and the introduction of a new set of mental health indicators and related forms and tally sheets at primary care clinics and district hospitals in five districts in the KwaZulu-Natal and Northern Cape provinces in South Africa. Overall, the key stakeholders perceived the MHIS strengthening as an effective intervention in both countries with an enhanced set of indicators in South Africa and introduction of a computerized system in Ghana. Influences on the design and implementation of MHIS interventions in Ghana and South Africa relate to resources, working approaches

Methodology for object-oriented real-time systems analysis and design: Software engineering

Science.gov (United States)

Schoeffler, James D.

1991-01-01

Successful application of software engineering methodologies requires an integrated analysis and design life-cycle in which the various phases flow smoothly 'seamlessly' from analysis through design to implementation. Furthermore, different analysis methodologies often lead to different structuring of the system so that the transition from analysis to design may be awkward depending on the design methodology to be used. This is especially important when object-oriented programming is to be used for implementation when the original specification and perhaps high-level design is non-object oriented. Two approaches to real-time systems analysis which can lead to an object-oriented design are contrasted: (1) modeling the system using structured analysis with real-time extensions which emphasizes data and control flows followed by the abstraction of objects where the operations or methods of the objects correspond to processes in the data flow diagrams and then design in terms of these objects; and (2) modeling the system from the beginning as a set of naturally occurring concurrent entities (objects) each having its own time-behavior defined by a set of states and state-transition rules and seamlessly transforming the analysis models into high-level design models. A new concept of a 'real-time systems-analysis object' is introduced and becomes the basic building block of a series of seamlessly-connected models which progress from the object-oriented real-time systems analysis and design system analysis logical models through the physical architectural models and the high-level design stages. The methodology is appropriate to the overall specification including hardware and software modules. In software modules, the systems analysis objects are transformed into software objects.

Implementing Firm Dynamic Capabilities Through the Concept Design Process

DEFF Research Database (Denmark)

Nedergaard, Nicky; Jones, Richard

2011-01-01

It is well understood that firms operating in highly dynamic and fluid markets need to possess strong dynamic capabilities of sensing (market trajectories), seizing (to capitalise on these trajectories), and transformation (in order to implement sustainable strategies). Less understood is how firms...... actually implement these capabilities. A conceptual model showing how managing concept design processes can help firms systematically develop dynamic capabilities and help bridge the gap between the market-oriented and resource-focused strategic perspectives is presented. By placing this model in a design......-driven innovation perspective three theoretical propositions is derived explicating both the paper’s implementation approach to dynamic capabilities as well as new ways of understanding these capabilities. Concluding remarks are made discussing both the paper’s contribution to the strategic marketing literature...

Design, implementation, and extension of thermal invisibility cloaks

Science.gov (United States)

Zhang, Youming; Xu, Hongyi; Zhang, Baile

2015-05-01

A thermal invisibility cloak, as inspired by optical invisibility cloaks, is a device which can steer the conductive heat flux around an isolated object without changing the ambient temperature distribution so that the object can be "invisible" to external thermal environment. While designs of thermal invisibility cloaks inherit previous theories from optical cloaks, the uniqueness of heat diffusion leads to more achievable implementations. Thermal invisibility cloaks, as well as the variations including thermal concentrator, rotator, and illusion devices, have potentials to be applied in thermal management, sensing and imaging applications. Here, we review the current knowledge of thermal invisibility cloaks in terms of their design and implementation in cloaking studies, and their extension as other functional devices.

Implementation of the electronic DDA workflow for NSSS system design

International Nuclear Information System (INIS)

Eom, Young Sam; Kim, Yeon Sung; Lee, Suk Hee; Kim, Mi Kyung

1996-06-01

For improving NSSS design quality, and productivity several cases of the nuclear developed nation's integrated management system, such as Mitsubishi's NUWINGS (Japan), AECL's CANDID (Canada) and Duke Powes's (USA) were investigated, and it was studied in this report that the system implementation of NSSS design document computerization and the major workflow process of the DDA (Document Distribution for Agreement). On the basis of the requirements of design document computerization which covered preparation, review, approval and distribution of the engineering documents, KAERI Engineering Information Management System (KEIMS) was implemented. Major effects of this report are to implement GUI panel for input and retrieval of the document index information, to setup electronic document workflow, and to provide quality assurance verification by tracing the workflow history. Major effects of NSSS design document computerization are the improvement of efficiency and reliability and the engineering cost reduction by means of the fast documents verification capability and electronic document transferring system. 2 tabs., 16 figs., 9 refs. (Author)

Design and implementation of integrated solid wastes management pattern in industrial zones, case study of Shahroud, Iran.

Science.gov (United States)

Saeid, Nazemi; Roudbari, Aliakbar; Yaghmaeian, Kamyar

2014-01-14

The aim of the study was to design and implementation of integrated solid wastes management pattern in Shahroud industrial zone, evaluates the results and determine possible performance problems. This cross - sectional study was carried out for 4 years in Shahroud industrial zone and the implementation process included:1- Qualitative and quantitative analysis of all solid waste generated in the city, 2- determine the current state of solid waste management in the zone and to identify programs conducted, 3- Design and implementation of integrated solid wastes management pattern including design and implementation of training programs, laws, penalties and incentives and explain and implement programs for all factories and 4- The monitoring of the implementation process and determine the results. Annually, 1,728 tons of solid wastes generated in the town including 1603 tons of industrial wastes and 125 tons of municipal wastes. By implementing this pattern, the two separated systems of collection and recycling of domestic and industrial wastes was launched in this zone. Also consistent with the goals, the amount of solid wastes generated and disposed in 2009 was 51.5 and 28.6 kg per 100 million Rials production, respectively. Results showed that implementation of pattern of separated collection, training programs, capacity building, providing technical services, completing chain of industries and strengthening the cooperation between industrial estate management and industrial units could greatly reduce the waste management problems.

Design and analysis of experiments

CERN Document Server

Dean, Angela; Draguljić, Danel

2017-01-01

This textbook takes a strategic approach to the broad-reaching subject of experimental design by identifying the objectives behind an experiment and teaching practical considerations that govern design and implementation, concepts that serve as the basis for the analytical techniques covered. Rather than a collection of miscellaneous approaches, chapters build on the planning, running, and analyzing of simple experiments in an approach that results from decades of teaching the subject. In most experiments, the procedures can be reproduced by readers, thus giving them a broad exposure to experiments that are simple enough to be followed through their entire course. Outlines of student and published experiments appear throughout the text and as exercises at the end of the chapters. The authors develop the theory of estimable functions and analysis of variance with detail, but at a mathematical level that is simultaneously approachable. Throughout the book, statistical aspects of analysis complement practical as...

Value Informed Conception, Design, Implementation and Operation of Education and Teaching Activities

DEFF Research Database (Denmark)

Nielsen, Michael Havbro Faber; Nielsen, Linda

2017-01-01

In the present paper we take basis in the basic postulate that the objective of education and teaching is value creation. With this setout we take up two implications, namely: i) decision analysis is the logical choice of management framework for conceiving, designing, implementing and operating ...... (CDIO) education and teaching activities and ii) a thorough, transparent and continuously informed discourse is necessary among all stakeholders to education on what this “value” actually is....

Implementing an online pharmaceutical service using design science research.

Science.gov (United States)

Lapão, Luís Velez; da Silva, Miguel Mira; Gregório, João

2017-03-27

The rising prevalence of chronic diseases is pressing health systems to introduce reforms. Primary healthcare and multidisciplinary models have been suggested as approaches to deal with this challenge, with new roles for nurses and pharmacists being advocated. More recently, implementing healthcare based on information systems and technologies (e.g. eHealth) has been proposed as a way to improve health services. However, implementing online pharmaceutical services, including their adoption by pharmacists and patients, is still an open research question. In this paper we present ePharmacare, a new online pharmaceutical service implemented using Design Science Research. The Design Science Research Methodology (DSRM) was chosen to implement this online service for chronic diseases management. In the paper, DSRM's different activities are explained, from the definition of the problem to the evaluation of the artifact. During the design and development activities, surveys, observations, focus groups, and eye-tracking glasses were used to validate pharmacists' and patients' requirements. During the demonstration and evaluation activities the new service was used with real-world pharmacists and patients. The results show the contribution of DSRM in the implementation of online services for pharmacies. We found that pharmacists spend only 50% of their time interacting with patients, uncovering a clear opportunity to implement online pharmaceutical care services. On the other hand, patients that regularly visit the same pharmacy recognize the value in patient follow-up demanding to use channels such as the Internet for their pharmacy interactions. Limitations were identified regarding the high workload of pharmacists, but particularly their lack of know-how and experience in dealing with information systems (IST) for the provision of pharmaceutical services. This paper summarizes a research project in which an online pharmaceutical service was proposed, designed, developed

Implementation Support of Security Design Patterns Using Test Templates

Directory of Open Access Journals (Sweden)

Masatoshi Yoshizawa

2016-06-01

Full Text Available Security patterns are intended to support software developers as the patterns encapsulate security expert knowledge. However, these patterns may be inappropriately applied because most developers are not security experts, leading to threats and vulnerabilities. Here we propose a support method for security design patterns in the implementation phase of software development. Our method creates a test template from a security design pattern, consisting of an “aspect test template” to observe the internal processing and a “test case template”. Providing design information creates a test from the test template with a tool. Because our test template is reusable, it can easily perform a test to validate a security design pattern. In an experiment involving four students majoring in information sciences, we confirm that our method can realize an effective test, verify pattern applications, and support pattern implementation.

Implementation of Quality by Design for Formulation of Rebamipide Gastro-retentive Tablet.

Science.gov (United States)

Ha, Jung-Myung; Seo, Jeong-Woong; Kim, Su-Hyeon; Kim, Ju-Young; Park, Chun-Woong; Rhee, Yun-Seok; Park, Eun-Seok

2017-11-01

The purpose of the present study was to develop a rebamipide (RBM) gastro-retentive (GR) tablet by implementing quality by design (QbD). RBM GR tablets were prepared using a sublimation method. Quality target product profile (QTPP) and critical quality attributes (CQAs) of the RBM GR tablets were defined according to the preliminary studies. Factors affecting the CQAs were prioritized using failure mode and effects analysis (FMEA). Design space and optimum formulation were established through a mixture design. The validity of the design space was confirmed using runs within the area. The QTPP of the RBM GR tablets was the orally administered GR tablet containing 300 mg of RBM taken once daily. Based on the QTPP, dissolution rate, tablet friability, and floating property were chosen as CQAs. According to the risk assessment, the amount of sustained-release agent, sublimating material, and diluent showed high-risk priority number (RPN) values above 40. Based on the RPN, these factors were further investigated using mixture design methodology. Design space of formulations was depicted as an overlaid contour plot and the optimum formulation to satisfy the desired responses was obtained by determining the expected value of each response. The similarity factor (f2) of the release profile between predicted response and experimental response was 89.463, suggesting that two release profiles are similar. The validity of the design space was also confirmed. Consequently, we were able to develop the RBM GR tablets by implementing the QbD concept. These results provide useful information for development of tablet formulations using the QbD.

Design, Implementation, and Verification of the Reliable Multicast Protocol. Thesis

Science.gov (United States)

Montgomery, Todd L.

1995-01-01

This document describes the Reliable Multicast Protocol (RMP) design, first implementation, and formal verification. RMP provides a totally ordered, reliable, atomic multicast service on top of an unreliable multicast datagram service. RMP is fully and symmetrically distributed so that no site bears an undue portion of the communications load. RMP provides a wide range of guarantees, from unreliable delivery to totally ordered delivery, to K-resilient, majority resilient, and totally resilient atomic delivery. These guarantees are selectable on a per message basis. RMP provides many communication options, including virtual synchrony, a publisher/subscriber model of message delivery, a client/server model of delivery, mutually exclusive handlers for messages, and mutually exclusive locks. It has been commonly believed that total ordering of messages can only be achieved at great performance expense. RMP discounts this. The first implementation of RMP has been shown to provide high throughput performance on Local Area Networks (LAN). For two or more destinations a single LAN, RMP provides higher throughput than any other protocol that does not use multicast or broadcast technology. The design, implementation, and verification activities of RMP have occurred concurrently. This has allowed the verification to maintain a high fidelity between design model, implementation model, and the verification model. The restrictions of implementation have influenced the design earlier than in normal sequential approaches. The protocol as a whole has matured smoother by the inclusion of several different perspectives into the product development.

Design and Implementation of an Innovative Residential PV System

Science.gov (United States)

Najm, Elie Michel

This work focuses on the design and implementation of an innovative residential PV system. In chapter one, after an introduction related to the rapid growth of solar systems' installations, the most commonly used state of the art solar power electronics' configurations are discussed, which leads to introducing the proposed DC/DC parallel configuration. The advantages and disadvantages of each of the power electronics' configurations are deliberated. The scope of work in the power electronics is defined in this chapter to be related to the panel side DC/DC converter. System integration and mechanical proposals are also within the scope of work and are discussed in later chapters. Operation principle of a novel low cost PV converter is proposed in chapter 2. The proposal is based on an innovative, simplified analog implementation of a master/slave methodology resulting in an efficient, soft-switched interleaved variable frequency flybacks, operating in the boundary conduction mode (BCM). The scheme concept and circuit configuration, operation principle and theoretical waveforms, design equations, and design considerations are presented. Furthermore, design examples are also given, illustrating the significance of the newly derived frequency equation for flybacks operating in BCM. In chapters 3, 4, and 5, the design implementation and optimization of the novel DC/DC converter illustrated in chapter 2 are discussed. In chapter 3, a detailed variable frequency BCM flyback design model leading to optimizing the component selections and transformer design, detailed in chapter 4, is presented. Furthermore, in chapter 4, the method enabling the use of lower voltage rating switching devices is also discussed. In chapter 5, circuitry related to Start-UP, drive for the main switching devices, zero-voltage-switching (ZVS) as well as turn OFF soft switching and interleaving control are fully detailed. The experimental results of the proposed DC/DC converter are presented in

School Counselor Lead Initial Individual Career and Academic Plan Implementation Design

Science.gov (United States)

Moeder-Chandler, Markus

2017-01-01

In Fall of 2014 for Fountain-Fort Carson School District #8 undertook a revamping of graduation and state-mandated ICAP requirements for implementation for the graduating class of 2021. This design and implementation process included numerous stakeholders and several years of planning from Fall of 2014 to Spring of 2017. The design and…

Risk, innovation and change : design propositions for implementing risk management in organizations

NARCIS (Netherlands)

van Staveren, Martinus Theodorus

2009-01-01

This Ph.D. research generated unique design propositions for implementing existing risk management methodologies in organizations. The resulting design propositions incorporate a synthesis of risk management, innovation management and change management. True implementation of risk management is

Beyond usability: designing effective technology implementation systems to promote patient safety.

Science.gov (United States)

Karsh, B-T

2004-10-01

Evidence is emerging that certain technologies such as computerized provider order entry may reduce the likelihood of patient harm. However, many technologies that should reduce medical errors have been abandoned because of problems with their design, their impact on workflow, and general dissatisfaction with them by end users. Patient safety researchers have therefore looked to human factors engineering for guidance on how to design technologies to be usable (easy to use) and useful (improving job performance, efficiency, and/or quality). While this is a necessary step towards improving the likelihood of end user satisfaction, it is still not sufficient. Human factors engineering research has shown that the manner in which technologies are implemented also needs to be designed carefully if benefits are to be realized. This paper reviews the theoretical knowledge on what leads to successful technology implementation and how this can be translated into specifically designed processes for successful technology change. The literature on diffusion of innovations, technology acceptance, organisational justice, participative decision making, and organisational change is reviewed and strategies for promoting successful implementation are provided. Given the rapid and ever increasing pace of technology implementation in health care, it is critical for the science of technology implementation to be understood and incorporated into efforts to improve patient safety.

Implementing risk-informed life-cycle design

International Nuclear Information System (INIS)

Hill, Ralph S. III

2007-01-01

This paper describes a design process based on risk-informed probabilistic methodologies that cover a facility's life-cycle from start of conceptual design through decontamination and decommissioning. The concept uses probabilistic risk assessments to identify target reliabilities for facility systems and components. Target reliabilities are used in system and subsystem simulation analyses to determine the optimum combination of initial system and component construction reliability, maintenance frequency, and inspection frequency for both active and passive components. The target reliabilities are also used for system based code margin exchange to reduce excessive level of margins to appropriate levels resulting in a more flexible structure of codes and standards that improves facility reliability and cost. The paper includes a description of a risk informed life-cycle design process, a summary of work being done, and a discussion of work needed to implement the process. (author)

Implementing analytics a blueprint for design, development, and adoption

CERN Document Server

Sheikh, Nauman

2013-01-01

Implementing Analytics demystifies the concept, technology and application of analytics and breaks its implementation down to repeatable and manageable steps, making it possible for widespread adoption across all functions of an organization. Implementing Analytics simplifies and helps democratize a very specialized discipline to foster business efficiency and innovation without investing in multi-million dollar technology and manpower. A technology agnostic methodology that breaks down complex tasks like model design and tuning and emphasizes business decisions rather than the technology behi

Design and implementation of a terrorist fraud resilient distance bounding system

NARCIS (Netherlands)

Ranganathan, A.; Tippenhauer, N.O.; Skoric, B.; Singelée, D.; Capkun, S.; Foresti, S.; Yung, M.; Martinelli, F.

2012-01-01

Given the requirements of fast processing and the complexity of RF ranging systems, distance bounding protocols have been challenging to implement so far; only few designs have been proposed and implemented. Currently, the most efficient implementation of distance bounding protocols uses analog

Advanced methods for the analysis, design, and optimization of SMA-based aerostructures

International Nuclear Information System (INIS)

Hartl, D J; Lagoudas, D C; Calkins, F T

2011-01-01

Engineers continue to apply shape memory alloys to aerospace actuation applications due to their high energy density, robust solid-state actuation, and silent and shock-free operation. Past design and development of such actuators relied on experimental trial and error and empirically derived graphical methods. Over the last two decades, however, it has been repeatedly demonstrated that existing SMA constitutive models can capture stabilized SMA transformation behaviors with sufficient accuracy. This work builds upon past successes and suggests a general framework by which predictive tools can be used to assess the responses of many possible design configurations in an automated fashion. By applying methods of design optimization, it is shown that the integrated implementation of appropriate analysis tools can guide engineers and designers to the best design configurations. A general design optimization framework is proposed for the consideration of any SMA component or assembly of such components that applies when the set of design variables includes many members. This is accomplished by relying on commercially available software and utilizing tools already well established in the design optimization community. Such tools are combined with finite element analysis (FEA) packages that consider a multitude of structural effects. The foundation of this work is a three-dimensional thermomechanical constitutive model for SMAs applicable for arbitrarily shaped bodies. A reduced-order implementation also allows computationally efficient analysis of structural components such as wires, rods, beams and shells. The use of multiple optimization schemes, the consideration of assembled components, and the accuracy of the implemented constitutive model in full and reduced-order forms are all demonstrated

Design and Implementation of Campus Application APP Based on Android

Science.gov (United States)

dongxu, Zhu; yabin, liu; xian lei, PI; weixiang, Zhou; meng, Huang

2017-07-01

In this paper, "Internet + campus" as the entrance of the Android technology based on the application of campus design and implementation of Application program. Based on GIS(Geographic Information System) spatial database, GIS spatial analysis technology, Java development technology and Android development technology, this system server adopts the Model View Controller architectue to realize the efficient use of campus information and provide real-time information of all kinds of learning and life for campus student at the same time. "Fingertips on the Institute of Disaster Prevention Science and Technology" release for the campus students of all grades of life, learning, entertainment provides a convenient.

Implementing Adaptive Educational Methods with IMS Learning Design

NARCIS (Netherlands)

Specht, Marcus; Burgos, Daniel

2006-01-01

Please, cite this publication as: Specht, M. & Burgos, D. (2006). Implementing Adaptive Educational Methods with IMS Learning Design. Proceedings of Adaptive Hypermedia. June, Dublin, Ireland. Retrieved June 30th, 2006, from http://dspace.learningnetworks.org

Design Analysis Method for Multidisciplinary Complex Product using SysML

Directory of Open Access Journals (Sweden)

Liu Jihong

2017-01-01

Full Text Available In the design of multidisciplinary complex products, model-based systems engineering methods are widely used. However, the methodologies only contain only modeling order and simple analysis steps, and lack integrated design analysis methods supporting the whole process. In order to solve the problem, a conceptual design analysis method with integrating modern design methods has been proposed. First, based on the requirement analysis of the quantization matrix, the user’s needs are quantitatively evaluated and translated to system requirements. Then, by the function decomposition of the function knowledge base, the total function is semi-automatically decomposed into the predefined atomic function. The function is matched into predefined structure through the behaviour layer using function-structure mapping based on the interface matching. Finally based on design structure matrix (DSM, the structure reorganization is completed. The process of analysis is implemented with SysML, and illustrated through an aircraft air conditioning system for the system validation.

Control rod repositioning considerations in core design analysis

International Nuclear Information System (INIS)

Armstrong, B.C.; Buechel, R.J.

1990-01-01

Control rod repositioning is a method for minimizing rod cluster control assembly (RCCA) wear in the upper internals area where the guide cards interface with the rodlets of the RCCAs. A number of utilities have implemented strategies for rod repositioning, which often has no impact on the nuclear analysis for cases where the control rods are never repositioned into the active fuel. Other strategies involve repositioning the control rods several steps into the active fuel. The impact of this type of repositioning on the axial power shape and consequently the total peaking factor F Q T varies, depending on the method in which the repositioning is implemented at the plant. Operating for long periods with all the control and shutdown rods inserted several steps in the active fuel followed by withdrawing them fully from the core results in a shifting of the power distribution toward the top of the core and must be accounted for in the design analysis. On the other hand, an optional plan for control rod repositioning that considers margins available in related design parameters can be devised that minimizes the effects of the repositioning for the reload. This paper summarizes a rod repositioning strategy implemented for a recent reload and some calculated power shape results for this strategy and other scenarios

Design and implementation of an intranet dashboard.

Science.gov (United States)

Wolpin, S E

2005-01-01

Healthcare organizations are complex systems and well served by efficient feedback mechanisms. Many organizations have invested in data warehouses; however there are few tools for automatically extracting and delivering relevant measures to decision makers. This research study resulted in the design and implementation of an intranet dashboard linked to a data warehouse.

Implementing XML Schema Naming and Design Rules

Energy Technology Data Exchange (ETDEWEB)

Lubell, Joshua [National Institute of Standards and Technology (NIST); Kulvatunyou, Boonserm [ORNL; Morris, Katherine [National Institute of Standards and Technology (NIST); Harvey, Betty [Electronic Commerce Connection, Inc.

2006-08-01

We are building a methodology and tool kit for encoding XML schema Naming and Design Rules (NDRs) in a computer-interpretable fashion, enabling automated rule enforcement and improving schema quality. Through our experience implementing rules from various NDR specifications, we discuss some issues and offer practical guidance to organizations grappling with NDR development.

Swarming Robot Design, Construction and Software Implementation

Science.gov (United States)

Stolleis, Karl A.

2014-01-01

In this paper is presented an overview of the hardware design, construction overview, software design and software implementation for a small, low-cost robot to be used for swarming robot development. In addition to the work done on the robot, a full simulation of the robotic system was developed using Robot Operating System (ROS) and its associated simulation. The eventual use of the robots will be exploration of evolving behaviors via genetic algorithms and builds on the work done at the University of New Mexico Biological Computation Lab.

Objective Oriented Design of Architecture for TH System Safety Analysis Code and Verification

Energy Technology Data Exchange (ETDEWEB)

Chung, Bub Dong

2008-03-15

In this work, objective oriented design of generic system analysis code has been tried based on the previous works in KAERI for two phase three field Pilot code. It has been performed to implement of input and output design, TH solver, component model, special TH models, heat structure solver, general table, trip and control, and on-line graphics. All essential features for system analysis has been designed and implemented in the final product SYSTF code. The computer language C was used for implementation in the Visual studio 2008 IDE (Integrated Development Environment) since it has easier and lighter than C++ feature. The code has simple and essential features of models and correlation, special component, special TH model and heat structure model. However the input features is able to simulate the various scenarios, such as steady state, non LOCA transient and LOCA accident. The structure validity has been tested through the various verification tests and it has been shown that the developed code can treat the non LOCA and LOCA simulation. However more detailed design and implementation of models are required to get the physical validity of SYSTF code simulation.

Objective Oriented Design of Architecture for TH System Safety Analysis Code and Verification

International Nuclear Information System (INIS)

Chung, Bub Dong

2008-03-01

In this work, objective oriented design of generic system analysis code has been tried based on the previous works in KAERI for two phase three field Pilot code. It has been performed to implement of input and output design, TH solver, component model, special TH models, heat structure solver, general table, trip and control, and on-line graphics. All essential features for system analysis has been designed and implemented in the final product SYSTF code. The computer language C was used for implementation in the Visual studio 2008 IDE (Integrated Development Environment) since it has easier and lighter than C++ feature. The code has simple and essential features of models and correlation, special component, special TH model and heat structure model. However the input features is able to simulate the various scenarios, such as steady state, non LOCA transient and LOCA accident. The structure validity has been tested through the various verification tests and it has been shown that the developed code can treat the non LOCA and LOCA simulation. However more detailed design and implementation of models are required to get the physical validity of SYSTF code simulation

Surveillance Monitoring Management for General Care Units: Strategy, Design, and Implementation.

Science.gov (United States)

McGrath, Susan P; Taenzer, Andreas H; Karon, Nancy; Blike, George

2016-07-01

The growing number of monitoring devices, combined with suboptimal patient monitoring and alarm management strategies, has increased "alarm fatigue," which have led to serious consequences. Most reported alarm man- agement approaches have focused on the critical care setting. Since 2007 Dartmouth-Hitchcock (Lebanon, New Hamp- shire) has developed a generalizable and effective design, implementation, and performance evaluation approach to alarm systems for continuous monitoring in general care settings (that is, patient surveillance monitoring). In late 2007, a patient surveillance monitoring system was piloted on the basis of a structured design and implementation approach in a 36-bed orthopedics unit. Beginning in early 2009, it was expanded to cover more than 200 inpatient beds in all medicine and surgical units, except for psychiatry and labor and delivery. Improvements in clinical outcomes (reduction of unplanned transfers by 50% and reduction of rescue events by more than 60% in 2008) and approximately two alarms per patient per 12-hour nursing shift in the original pilot unit have been sustained across most D-H general care units in spite of increasing patient acuity and unit occupancy. Sample analysis of pager notifications indicates that more than 85% of all alarm conditions are resolved within 30 seconds and that more than 99% are resolved before escalation is triggered. The D-H surveillance monitoring system employs several important, generalizable features to manage alarms in a general care setting: alarm delays, static thresholds set appropriately for the prevalence of events in this setting, directed alarm annunciation, and policy-driven customization of thresholds to allow clinicians to respond to needs of individual patients. The systematic approach to design, implementation, and performance management has been key to the success of the system.

Design and analysis of a novel latch system implementing fiber-reinforced composite materials

Science.gov (United States)

Guevara Arreola, Francisco Javier

The use of fiber-reinforced composite materials have increased in the last four decades in high technology applications due to their exceptional mechanical properties and low weight. In the automotive industry carbon fiber have become popular exclusively in luxury cars because of its high cost. However, Carbon-glass hybrid composites offer an effective alternative to designers to implement fiber-reinforced composites into several conventional applications without a considerable price increase maintaining most of their mechanical properties. A door latch system is a complex mechanism that is under high loading conditions during car accidents such as side impacts and rollovers. Therefore, the Department of Transportation in The United States developed a series of tests that every door latch system comply in order to be installed in a vehicle. The implementation of fiber-reinforced composite materials in a door latch system was studied by analyzing the material behavior during the FMVSS No. 206 transverse test using computational efforts and experimental testing. Firstly, a computational model of the current forkbolt and detent structure was developed. Several efforts were conducted in order to create an effective and time efficient model. Two simplified models were implemented with two different contact interaction approaches. 9 composite materials were studied in forkbolt and 5 in detent including woven carbon fiber, unidirectional carbon fiber, woven carbon-glass fiber hybrid composites and unidirectional carbon-glass fiber hybrid composites. The computational model results showed that woven fiber-reinforced composite materials were stiffer than the unidirectional fiber-reinforced composite materials. For instance, a forkbolt made of woven carbon fibers was 20% stiffer than a forkbolt made of unidirectional fibers symmetrically stacked in 0° and 90° alternating directions. Furthermore, Hybrid composite materials behaved as expected in forkbolt noticing a decline

Reconfigurable Manufacturing System Design and Implementation

DEFF Research Database (Denmark)

Hadar, Ronen; Bilberg, Arne

2013-01-01

is meant primarily to show the physical feasibility of the system and provide a first-look into a real production application of the RMS ideas. The purpose of this paper is to present the design of the manufacturer’s RMS proof of concept, its implementation, and evaluation results.......Reconfigurable Manufacturing Systems (RMS) have been an increasing area of interest in the research arena. However, it seems that current literature is lacking application and implementation cases where RMS are simulated, tested, and evaluated as a feasible manufacturing concept. A Manufacturer...... of Consumer Goods identified the potential of the RMS concept and decided to investigate the concept in a real production installation. The result of this development is a proof of concept of a changeable and reconfigurable assembly and decoration system based on the principles of RMS. This proof of concept...

Designing and implementing an ICT4RED initiative

CSIR Research Space (South Africa)

Herselman, M

2014-12-01

Full Text Available The purpose of this book is to provide an overview of the design and implementation of an Information and Communication Technology for rural education development initiative in a resource constrained environment. This intervention is coined...

Pressurized water reactor system model for control system design and analysis

International Nuclear Information System (INIS)

Cooper, K.F.; Cain, J.T.

1975-01-01

Satisfactory operation of present generation Pressurized Water Reactor (PWR) Nuclear Power systems requires that several independent and interactive control systems be designed. Since it is not practical to use an actual PWR system as a design tool, a mathematical model of the system must be developed as a design and analysis tool. The model presented has been developed to be used as an aid in applying optimal control theory to design and implement new control systems for PWR plants. To be applicable, the model developed must represent the PWR system in its normal operating range. For safety analysis the operating conditions of the system are usually abnormal and, therefore, the system modeling requirements are different from those for control system design and analysis

Design and Implementation of Collaborative Research Approaches

Science.gov (United States)

Venti, Mike W.; Berger, David E.

2009-01-01

This poster reviews the collarborative research approaches that NASA has been designing and implementing for the Integrated Vehicle Health Management (IVHM) Project. The inputs for the technical plan are reviewed, the Research Test and Integration Plan (RTIP) WIKI, is used to create and propose a multi-themed and multi-partner research testing opportunities. The outputs are testing opportunities.

NDARC - NASA Design and Analysis of Rotorcraft

Science.gov (United States)

Johnson, Wayne

2015-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool that supports both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet specified requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft configurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates configuration flexibility, a hierarchy of models, and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with low-fidelity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance calculation, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft configurations is facilitated, while retaining the capability to model novel and advanced concepts. Specific rotorcraft configurations considered are single-main-rotor and tail

NDARC NASA Design and Analysis of Rotorcraft

Science.gov (United States)

Johnson, Wayne R.

2009-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool intended to support both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet specified requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft configurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates configuration flexibility; a hierarchy of models; and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with lowfidelity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance calculation, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft configurations is facilitated, while retaining the capability to model novel and advanced concepts. Specific rotorcraft configurations considered are single main-rotor and

Design and Implementation of a Cyber-Defense Exercise

OpenAIRE

Adrian Furtuna

2010-01-01

Learning by practice is a very effective way of education in some activity domains, including information security. The article explores this idea by showing how a cyber-defense exercise can be designed and implemented in order to reach its educational goals.

Design, Implementation and Analysis of Learner-Centered Guided In-Service Programme for Technical Teacher Education

Directory of Open Access Journals (Sweden)

Tiia Rüütmann

2014-03-01

Full Text Available The design of learner-centered guided in-service program for technical teacher education has been launched at Estonian Centre for Engineering Pedagogy at Tallinn University of Technology. The aim of the program has been facilitating the initial in-service teaching experience, involving mentoring, peer support and cognitive apprenticeship. The emphasis has been on teaching for knowledge application, including the choice of content and processes, motivation, reflection, problem-solving, choice of educational technology, effective teaching methods, teaching models and strategies ཿ concepts, tools and procedures of the field of engineering, organized in ways enabling teachers to formulate real world problems, apply and solve them. The program has been implemented since 2012 and covers IGIP curriculum requirements. In the present article the designed program is described and analyzed.

A top-down design methodology and its implementation for VCSEL-based optical links design

Science.gov (United States)

Li, Jiguang; Cao, Mingcui; Cai, Zilong

2005-01-01

In order to find the optimal design for a given specification of an optical communication link, an integrated simulation of electronic, optoelectronic, and optical components of a complete system is required. It is very important to be able to simulate at both system level and detailed model level. This kind of model is feasible due to the high potential of Verilog-AMS language. In this paper, we propose an effective top-down design methodology and employ it in the development of a complete VCSEL-based optical links simulation. The principle of top-down methodology is that the development would proceed from the system to device level. To design a hierarchical model for VCSEL based optical links, the design framework is organized in three levels of hierarchy. The models are developed, and implemented in Verilog-AMS. Therefore, the model parameters are fitted to measured data. A sample transient simulation demonstrates the functioning of our implementation. Suggestions for future directions in top-down methodology used for optoelectronic systems technology are also presented.

An algorithm, implementation and execution ontology design pattern

NARCIS (Netherlands)

Lawrynowicz, A.; Esteves, D.; Panov, P.; Soru, T.; Dzeroski, S.; Vanschoren, J.

2016-01-01

This paper describes an ontology design pattern for modeling algorithms, their implementations and executions. This pattern is derived from the research results on data mining/machine learning ontologies, but is more generic. We argue that the proposed pattern will foster the development of

Double seal door design and analysis for ITER transfer cask

International Nuclear Information System (INIS)

Liu, C.L.; Yao, D.M.; Cheng, T.

2007-01-01

DSD (Double seal door) design concept was introduced. 3-D model work was performed for DSD in the three typical regions, such as upper port, equatorial port, divertor port. The numerical analysis for some typical components was done based on Finite Element (FE) method by using ANSYS code, especially for the optimization activities. The rescue procedures of the DSD was discussed which could benefit a little for future engineering implementation. The design and analysis work can support and be the important reference for future procurement. (authors)

The Implementation and Evaluation of an Instructional Design Based on the Interdisciplinary Approach: Conscious Consumer Education

Science.gov (United States)

Karakus, Memet; Uyar, Melis Yesilpinar

2018-01-01

The aim of this study was to implement and evaluate the instructional design prepared as consumer-oriented and based upon interdisciplinary curriculum. In this study, case study approach, which is one of the qualitative research patterns, was employed. Observations, interviews and document analysis were used to collect data. For analyzing the…

Connecting the dots : supporting the implementation of teacher design teams

NARCIS (Netherlands)

Binkhorst, Floor

2017-01-01

In Teacher Design Teams (TDTs), teachers collaborate on (re)designing educational materials. Although several studies have shown that TDTs can contribute to teachers’ professional development, as well as to sustainable implementation of educational change by using the educational materials they

Analysis of vulnerability to intrusion - a software for aid in training, design, and implementation of physical system

International Nuclear Information System (INIS)

Tangdan

2002-01-01

Full text: In this paper, we discuss briefly the developed level of physical protection system (PPS) in different Chinese history stage, and the relation between PPS and society, politics, military and security. It reveals the current status of application of PPS in China, and the level of design, implementation, evaluation and products. We also discuss the developing direction and applying tendency of PPS in future China. We mainly introduce a software using the ASD to evaluate the effectiveness of the PPS at a facility. It is used for training, design, and implementation of physical system. It identifies the path which adversaries can follow to accomplish sabotage or theft. For a specific PPS and threat, the most vulnerable path can be determined. The path probability of interruption P(I) establishes of the total PPS. Especially, we introduce how to specify threat characteristics bases the situation of present Chinese society, based global and local threat development. We also introduce how to build a data base of different elements based on the level of crime at present China. (author)

Linking Brief Functional Analysis to Intervention Design in General Education Settings

Science.gov (United States)

Ishuin, Tifanie

2009-01-01

This study focused on the utility and applicability of brief functional analysis in general education settings. The purpose of the study was to first identify the environmental variables maintaining noncompliance through a brief functional analysis, and then to design and implement a functionally equivalent intervention. The participant exhibited…

The design and implementation of online medical record system ...

African Journals Online (AJOL)

The design and implementation of online medical record system (OMRS) ... PROMOTING ACCESS TO AFRICAN RESEARCH. AFRICAN JOURNALS ONLINE (AJOL) ... International Journal of Natural and Applied Sciences. Journal Home ...

Design and Implementation of Direct Form FIR Filter

OpenAIRE

Kumar, Hanny; Kumar, Kamal

2016-01-01

The research article presents the design of the direct form of the Finite Impulse Response (FIR) filter using VHDL programming language. Multimedia technology and broadband communication demand the low power and high performance design applications in Digital Signal Processing (DSP). The digital filters are most important element of the communication system and DSP. In the paper, 7 tap FIR filter is implemented in Xilinx 14.2 software and functionally simulated in Modelsim 10.1 b software. Th...

Feasibility study for objective oriented design of system thermal hydraulic analysis program

International Nuclear Information System (INIS)

Chung, Bub Dong; Jeong, Jae Jun; Hwang, Moon Kyu

2008-01-01

The system safety analysis code, such as RELAP5, TRAC, CATHARE etc. have been developed based on Fortran language during the past few decades. Refactoring of conventional codes has been also performed to improve code readability and maintenance. However the programming paradigm in software technology has been changed to use objects oriented programming (OOP), which is based on several techniques, including encapsulation, modularity, polymorphism, and inheritance. In this work, objective oriented program for system safety analysis code has been tried utilizing modernized C language. The analysis, design, implementation and verification steps for OOP system code development are described with some implementation examples. The system code SYSTF based on three-fluid thermal hydraulic solver has been developed by OOP design. The verifications of feasibility are performed with simple fundamental problems and plant models. (author)

Integrated In Silico Analysis of Pathway Designs for Synthetic Photo-Electro-Autotrophy.

Directory of Open Access Journals (Sweden)

Michael Volpers

Full Text Available The strong advances in synthetic biology enable the engineering of novel functions and complex biological features in unprecedented ways, such as implementing synthetic autotrophic metabolism into heterotrophic hosts. A key challenge for the sustainable production of fuels and chemicals entails the engineering of synthetic autotrophic organisms that can effectively and efficiently fix carbon dioxide by using sustainable energy sources. This challenge involves the integration of carbon fixation and energy uptake systems. A variety of carbon fixation pathways and several types of photosystems and other energy uptake systems can be chosen and, potentially, modularly combined to design synthetic autotrophic metabolism. Prior to implementation, these designs can be evaluated by the combination of several computational pathway analysis techniques. Here we present a systematic, integrated in silico analysis of photo-electro-autotrophic pathway designs, consisting of natural and synthetic carbon fixation pathways, a proton-pumping rhodopsin photosystem for ATP regeneration and an electron uptake pathway. We integrated Flux Balance Analysis of the heterotrophic chassis Escherichia coli with kinetic pathway analysis and thermodynamic pathway analysis (Max-min Driving Force. The photo-electro-autotrophic designs are predicted to have a limited potential for anaerobic, autotrophic growth of E. coli, given the relatively low ATP regenerating capacity of the proton pumping rhodopsin photosystems and the high ATP maintenance of E. coli. If these factors can be tackled, our analysis indicates the highest growth potential for the natural reductive tricarboxylic acid cycle and the synthetic pyruvate synthase-pyruvate carboxylate -glyoxylate bicycle. Both carbon fixation cycles are very ATP efficient, while maintaining fast kinetics, which also results in relatively low estimated protein costs for these pathways. Furthermore, the synthetic bicycles are highly

Design and Implementation of CNEOST Image Database Based on NoSQL System

Science.gov (United States)

Wang, Xin

2014-04-01

The China Near Earth Object Survey Telescope is the largest Schmidt telescope in China, and it has acquired more than 3 TB astronomical image data since it saw the first light in 2006. After the upgrade of the CCD camera in 2013, over 10 TB data will be obtained every year. The management of the massive images is not only an indispensable part of data processing pipeline but also the basis of data sharing. Based on the analysis of requirement, an image management system is designed and implemented by employing the non-relational database.

Design & Implementation of Company Database for MME Subcontracting Unit

CERN Document Server

Horvath, Benedek

2016-01-01

The purpose of this document is to introduce the software stack designed and implemented by me, during my student project. The report includes both the project description, the requirements set against the solution, the already existing alternatives for solving the problem, and the final solution that has been implemented. Reading this document you may have a better understanding of what I was working on for eleven weeks in the summer of 2016.

Timing Constraints Based High Performance Des Design And Implementation On 28nm FPGA

DEFF Research Database (Denmark)

Thind, Vandana; Pandey, Sujeet; Hussain, Dil muhammed Akbar

2018-01-01

in this work, we are going to implement DES Algorithm on 28nm Artix-7 FPGA. To achieve high performance design goal, we are using minimum period, maximum frequency, minimum low pulse, minimum high pulse for different cases of worst case slack, maximum delay, setup time, hold time and data skew path....... The cases on which analysis is done are like worst case slack, best case achievable, timing error and timing score, which help in differentiating the amount of timing constraint at two different frequencies. We analyzed that in timing analysis there is maximum of 19.56% of variation in worst case slack, 0...

Facility Safeguardability Analysis in Support of Safeguards by Design

International Nuclear Information System (INIS)

Wonder, E.F.

2010-01-01

The idea of 'Safeguards-by-Design' (SBD) means designing and incorporating safeguards features into new civil nuclear facilities at the earliest stages in the design process to ensure that the constructed facility is 'safeguardable,' i.e. will meet national and international nuclear safeguards requirements. Earlier consideration of safeguards features has the potential to reduce the need for costly retrofits of the facility and can result in a more efficient and effective safeguards design. A 'Facility Safeguardability Analysis' (FSA) would be a key step in Safeguards-by-Design that would link the safeguards requirements with the 'best practices', 'lessons learned', and design of the safeguards measures for implementing those requirements. The facility designer's nuclear safeguards experts would work closely with other elements of the project design team in performing FSA. The resultant analysis would support discussions and interactions with the national nuclear regulator (i.e. State System of Accounting for and Control of Nuclear Material - SSAC) and the IAEA for development and approval of the proposed safeguards system. FSA would also support the implementation of international safeguards by the IAEA, by providing them with a means to analyse and evaluate the safeguardability of facilities being designed and constructed - i.e. by independently reviewing and validating the FSA as performed by the design team. Development of an FSA methodology is part of a broader U.S. National Nuclear Security Administration program to develop international safeguards-by-design tools and guidance documents for use by facility designers. The NNSA NGSI -sponsored project team is looking, as one element of its work, at how elements of the methodology developed by the Generation IV International Forum's Working Group on Proliferation Resistance and Physical Protection can be adapted to supporting FSA. (author)

Design and Implementation of Frequency-responsive Thermostat Control

DEFF Research Database (Denmark)

Nyeng, Preben; Østergaard, Jacob; Togeby, Mikael

2010-01-01

properties and needs of each application, and on the other hand the requirements of the system operator. The control algorithms are implemented on a microcontroller unit that is interfaced with existing thermostats for each application. To validate the control algorithms and overall system design, a series...

The Role of Ethnography in the Design and Implementation of IT Systems

DEFF Research Database (Denmark)

Simonsen, Jesper

2009-01-01

an example from a case where a fully functional prototype of a large Electronic Patient Record (EPR) system was designed, implemented, used as a pilot study, and subjected to evaluations based on ethno- graphic observations. The case demonstrates how a new and important role for ethnography can...... be established as an integral part of iterative approaches to design and organizational implementation of large IT systems. The role of ethnography can be expanded from a descriptive role (describing ex- isting work practices or the situation after a complete implementation) to a constructive role focusing...

ACS sampling system: design, implementation, and performance evaluation

Science.gov (United States)

Di Marcantonio, Paolo; Cirami, Roberto; Chiozzi, Gianluca

2004-09-01

By means of ACS (ALMA Common Software) framework we designed and implemented a sampling system which allows sampling of every Characteristic Component Property with a specific, user-defined, sustained frequency limited only by the hardware. Collected data are sent to various clients (one or more Java plotting widgets, a dedicated GUI or a COTS application) using the ACS/CORBA Notification Channel. The data transport is optimized: samples are cached locally and sent in packets with a lower and user-defined frequency to keep network load under control. Simultaneous sampling of the Properties of different Components is also possible. Together with the design and implementation issues we present the performance of the sampling system evaluated on two different platforms: on a VME based system using VxWorks RTOS (currently adopted by ALMA) and on a PC/104+ embedded platform using Red Hat 9 Linux operating system. The PC/104+ solution offers, as an alternative, a low cost PC compatible hardware environment with free and open operating system.

Sandia's experience in designing and implementing integrated high security physical protection systems

International Nuclear Information System (INIS)

Caskey, D.L.

1986-01-01

As DOE's lead laboratory for physical security, Sandia National Laboratories has had a major physical security program for over ten years. Activities have ranged from component development and evaluation, to full scale system design and implementation. This paper presents some of the lessons learned in designing and implementing state-of-the-art high security physical protection systems for a number of government facilities. A generic system design is discussed for illustration purposes. Sandia efforts to transfer technology to industry are described

Design and implement of pack filter module base on embedded firewall

Science.gov (United States)

Tian, Libo; Wang, Chen; Yang, Shunbo

2011-10-01

In the traditional security solution conditions, software firewall cannot intercept and respond the invasion before being attacked. And because of the high cost, the hardware firewall does not apply to the security strategy of the end nodes, so we have designed a kind of solution of embedded firewall with hardware and software. With ARM embedding Linux operating system, we have designed packet filter module and intrusion detection module to implement the basic function of firewall. Experiments and results show that that firewall has the advantages of low cost, high processing speed, high safety and the application of the computer terminals. This paper focuses on packet filtering module design and implementation.

Design and implementation of a biomimetic turtle hydrofoil for an autonomous underwater vehicle.

Science.gov (United States)

Font, Davinia; Tresanchez, Marcel; Siegentahler, Cedric; Pallejà, Tomàs; Teixidó, Mercè; Pradalier, Cedric; Palacin, Jordi

2011-01-01

This paper presents the design and implementation of a turtle hydrofoil for an Autonomous Underwater Vehicle (AUV). The final design of the AUV must have navigation performance like a turtle, which has also been the biomimetic inspiration for the design of the hydrofoil and propulsion system. The hydrofoil design is based on a National Advisory Committee for Aeronautics (NACA) 0014 hydrodynamic profile. During the design stage, four different propulsion systems were compared in terms of propulsion path, compactness, sealing and required power. The final implementation is based on a ball-and-socket mechanism because it is very compact and provides three degrees of freedom (DoF) to the hydrofoil with very few restrictions on the propulsion path. The propulsion obtained with the final implementation of the hydrofoil has been empirically evaluated in a water channel comparing different motion strategies. The results obtained have confirmed that the proposed turtle hydrofoil controlled with a mechanism with three DoF generates can be used in the future implementation of the planned AUV.

Design and Implementation of a Biomimetic Turtle Hydrofoil for an Autonomous Underwater Vehicle

Science.gov (United States)

Font, Davinia; Tresanchez, Marcel; Siegentahler, Cedric; Pallejà, Tomàs; Teixidó, Mercè; Pradalier, Cedric; Palacin, Jordi

2011-01-01

This paper presents the design and implementation of a turtle hydrofoil for an Autonomous Underwater Vehicle (AUV). The final design of the AUV must have navigation performance like a turtle, which has also been the biomimetic inspiration for the design of the hydrofoil and propulsion system. The hydrofoil design is based on a National Advisory Committee for Aeronautics (NACA) 0014 hydrodynamic profile. During the design stage, four different propulsion systems were compared in terms of propulsion path, compactness, sealing and required power. The final implementation is based on a ball-and-socket mechanism because it is very compact and provides three degrees of freedom (DoF) to the hydrofoil with very few restrictions on the propulsion path. The propulsion obtained with the final implementation of the hydrofoil has been empirically evaluated in a water channel comparing different motion strategies. The results obtained have confirmed that the proposed turtle hydrofoil controlled with a mechanism with three DoF generates can be used in the future implementation of the planned AUV. PMID:22247660

Design and Implementation of a Biomimetic Turtle Hydrofoil for an Autonomous Underwater Vehicle

Directory of Open Access Journals (Sweden)

Jordi Palacin

2011-11-01

Full Text Available This paper presents the design and implementation of a turtle hydrofoil for an Autonomous Underwater Vehicle (AUV. The final design of the AUV must have navigation performance like a turtle, which has also been the biomimetic inspiration for the design of the hydrofoil and propulsion system. The hydrofoil design is based on a National Advisory Committee for Aeronautics (NACA 0014 hydrodynamic profile. During the design stage, four different propulsion systems were compared in terms of propulsion path, compactness, sealing and required power. The final implementation is based on a ball-and-socket mechanism because it is very compact and provides three degrees of freedom (DoF to the hydrofoil with very few restrictions on the propulsion path. The propulsion obtained with the final implementation of the hydrofoil has been empirically evaluated in a water channel comparing different motion strategies. The results obtained have confirmed that the proposed turtle hydrofoil controlled with a mechanism with three DoF generates can be used in the future implementation of the planned AUV.

Design and Implementation of Microcontroller based Automated Air ...

African Journals Online (AJOL)

However, the currently available refrigerator trucks have no dynamically controlled system as expected to be. Therefore, the aim of this paper is to design, simulate and implement microcontroller based air conditioning controller to monitor and control the Refrigerator temperature by using a temperature sensor, LM35 and ...

Design and implementation of design content management platform

International Nuclear Information System (INIS)

Wang Yunfu; Zhang Jie

2010-01-01

Enterprise management is being transferred from a traditional database management to the content management with unstructured data management as the core. The content management is becoming part of enterprise information infrastructure and on the other hand, companies need a high-performance, high expansibility, able to support the rapid development of enterprise business and able to meet the changing needs of enterprise business content management platform. For a design institute, the document management system is developed based on Documentum software,and has been charged with documents with all the projects under construction and pre-project, project correspondence, records management, publishing management, library information management, authorization management,etc., and supply the services for the design and production systems. Based on the practical business applications, this paper sum up the architecture design and the gain and loss of the system design for the content management platform in design institute, analysis the supports relationship between the content management platform and other design and production systems, as well as the necessary for continuous improvement of work and finally propose the future development direction for' content management platform in the design institute. (authors)

Impact of the implementation of a well-designed electronic laboratory notebook on bioanalytical laboratory function.

Science.gov (United States)

Zeng, Jianing; Hillman, Mark; Arnold, Mark

2011-07-01

This paper shares experiences of the Bristol-Myers Squibb Company during the design, validation and implementation of an electronic laboratory notebook (ELN) into the GLP/regulated bioanalytical analysis area, as well as addresses the impact on bioanalytical laboratory functions with the implementation of the electronic notebook. Some of the key points covered are: knowledge management - the project-based electronic notebook takes full advantage of the available technology that focuses on data organization and sharing so that scientific data generated by individual scientists became department knowledge; bioanalytical workflows in the ELN - the custom-built workflows that include data entry templates, validated calculation processes, integration with laboratory information management systems/laboratory instruments, and reporting capability improve the data quality and overall workflow efficiency; regulatory compliance - carefully designed notebook reviewing processes, cross referencing of distributed information, audit trail and software validation reduce compliance risks. By taking into consideration both data generation and project documentation needs, a well-designed ELN can deliver significant improvements in laboratory efficiency, work productivity, and regulatory compliance.

Solid-state tap-changer of transformers: Design, control and implementation

Energy Technology Data Exchange (ETDEWEB)

Faiz, Jawad; Siahkolah, Behzad [Center of Excellence on Applied Electromagnetic Systems, School of Electrical and Computer Engineering, University of Tehran, Tehran 1439957131 (Iran, Islamic Republic of)

2011-02-15

This paper presents the implementation of a prototype electronic tap-changer of transformer. Mechanical tap-changer has many problems such as low operating speed, short lifetime and heavy size. In order to solve these problems a fully solid-state tap-changer with a new control strategy and optimal configuration is proposed. The design of tap-changer is discussed and bi-directional solid-state power electronics switches are implemented. Following the realization of the tap-changer controller, developed software for such precise control is introduced. To verify the design procedure and optimal configuration and apply the developed software, a prototype low-power tap-changer has been built and tested. (author)

Free material stiffness design of laminated composite structures using commercial finite element analysis codes

DEFF Research Database (Denmark)

Henrichsen, Søren Randrup; Lindgaard, Esben; Lund, Erik

2015-01-01

In this work optimum stiffness design of laminated composite structures is performed using the commercially available programs ANSYS and MATLAB. Within these programs a Free Material Optimization algorithm is implemented based on an optimality condition and a heuristic update scheme. The heuristic...... update scheme is needed because commercially available finite element analysis software is used. When using a commercial finite element analysis code it is not straight forward to implement a computationally efficient gradient based optimization algorithm. Examples considered in this work are a clamped......, where full access to the finite element analysis core is granted. This comparison displays the possibility of using commercially available programs for stiffness design of laminated composite structures....

Competency-based education: programme design and challenges to implementation.

Science.gov (United States)

Gruppen, Larry D; Burkhardt, John C; Fitzgerald, James T; Funnell, Martha; Haftel, Hilary M; Lypson, Monica L; Mullan, Patricia B; Santen, Sally A; Sheets, Kent J; Stalburg, Caren M; Vasquez, John A

2016-05-01

Competency-based education (CBE) has been widely cited as an educational framework for medical students and residents, and provides a framework for designing educational programmes that reflect four critical features: a focus on outcomes, an emphasis on abilities, a reduction of emphasis on time-based training, and promotion of learner centredness. Each of these features has implications and potential challenges for implementing CBE. As an experiment in CBE programme design and implementation, the University of Michigan Master of Health Professions Education (UM-MHPE) degree programme was examined for lessons to be learned when putting CBE into practice. The UM-MHPE identifies 12 educational competencies and 20 educational entrustable professional activities (EPAs) that serve as the vehicle for both learning and assessment. The programme also defines distinct roles of faculty members as assessors, mentors and subject-matter experts focused on highly individualised learning plans adapted to each learner. Early experience with implementing the UM-MHPE indicates that EPAs and competencies can provide a viable alternative to traditional courses and a vehicle for rigorous assessment. A high level of individualisation is feasible but carries with it significant costs and makes intentional community building essential. Most significantly, abandoning a time-based framework is a difficult innovation to implement in a university structure that is predicated on time-based education. © 2016 John Wiley & Sons Ltd.

SHARK-NIR system design analysis overview

Science.gov (United States)

Viotto, Valentina; Farinato, Jacopo; Greggio, Davide; Vassallo, Daniele; Carolo, Elena; Baruffolo, Andrea; Bergomi, Maria; Carlotti, Alexis; De Pascale, Marco; D'Orazi, Valentina; Fantinel, Daniela; Magrin, Demetrio; Marafatto, Luca; Mohr, Lars; Ragazzoni, Roberto; Salasnich, Bernardo; Verinaud, Christophe

2016-08-01

In this paper, we present an overview of the System Design Analysis carried on for SHARK-NIR, the coronagraphic camera designed to take advantage of the outstanding performance that can be obtained with the FLAO facility at the LBT, in the near infrared regime. Born as a fast-track project, the system now foresees both coronagraphic direct imaging and spectroscopic observing mode, together with a first order wavefront correction tool. The analysis we here report includes several trade-offs for the selection of the baseline design, in terms of optical and mechanical engineering, and the choice of the coronagraphic techniques to be implemented, to satisfy both the main scientific drivers and the technical requirements set at the level of the telescope. Further care has been taken on the possible exploitation of the synergy with other LBT instrumentation, like LBTI. A set of system specifications is then flown down from the upper level requirements to finally ensure the fulfillment of the science drivers. The preliminary performance budgets are presented, both in terms of the main optical planes stability and of the image quality, including the contributions of the main error sources in different observing modes.

Design and Implementation of the PALM-3000 Real-Time Control System

Science.gov (United States)

Truong, Tuan N.; Bouchez, Antonin H.; Burruss, Rick S.; Dekany, Richard G.; Guiwits, Stephen R.; Roberts, Jennifer E.; Shelton, Jean C.; Troy, Mitchell

2012-01-01

This paper reflects, from a computational perspective, on the experience gathered in designing and implementing realtime control of the PALM-3000 adaptive optics system currently in operation at the Palomar Observatory. We review the algorithms that serve as functional requirements driving the architecture developed, and describe key design issues and solutions that contributed to the system's low compute-latency. Additionally, we describe an implementation of dense matrix-vector-multiplication for wavefront reconstruction that exceeds 95% of the maximum sustained achievable bandwidth on NVIDIA Geforce 8800GTX GPU.

Design, control, and implementation of LCL-filter-based shunt active power filters

DEFF Research Database (Denmark)

Tang, Yi; Loh, Poh Chiang; Wang, Peng

2011-01-01

This paper concentrates on the design, control and implementation of an LCL-filter-based shunt active power filter (SAPF), which can effectively compensate harmonic currents produced by nonlinear loads in a three-phase three-wire power system. The use of LCL-filter at the output end of SAPF offer......-loop control system, and active damping implemented with fewer current sensors are all addressed here. An analytical design example is finally presented, being supported with experimental results, to verify its effectiveness and practicality.......This paper concentrates on the design, control and implementation of an LCL-filter-based shunt active power filter (SAPF), which can effectively compensate harmonic currents produced by nonlinear loads in a three-phase three-wire power system. The use of LCL-filter at the output end of SAPF offers...

Practical design control implementation for medical devices

CERN Document Server

Justiniano, Jose

2003-01-01

Bringing together the concepts of design control and reliability engineering, this book is a must for medical device manufacturers. It helps them meet the challenge of designing and developing products that meet or exceed customer expectations and also meet regulatory requirements. Part One covers motivation for design control and validation, design control requirements, process validation and design transfer, quality system for design control, and measuring design control program effectiveness. Part Two discusses risk analysis and FMEA, designing-in reliability, reliability and design verific

Design and Implementation of a Professional Development Course Series.

Science.gov (United States)

Welch, Beth; Spooner, Joshua J; Tanzer, Kim; Dintzner, Matthew R

2017-12-01

Objective. To design and implement a longitudinal course series focused on professional development and professional identity formation in pharmacy students at Western New England University. Methods. A four-year, theme-based course series was designed to sequentially and longitudinally impart the values, attributes, and characteristics of a professional pharmacist. Requirements of the course include: goal planning and reflective assignments, submission of "Best Works," attendance at professional meetings, completion of service hours, annual completion of a Pharmacy Professionalism Instrument, attendance at Dean's Seminar, participation in roundtable discussions, and maintenance of an electronic portfolio. Though the Professional Development course series carries no credit, these courses are progression requirements and students are assessed on a pass/fail basis. Results. Course pass rates in the 2015-2016 academic year for all four classes were 99% to 100%, suggesting the majority of students take professional development seriously and are achieving the intended outcomes of the courses. Conclusion. A professional development course series was designed and implemented in the new Doctor of Pharmacy program at Western New England University to enhance the professional identity formation of students.

design and implementation of a web based information system

African Journals Online (AJOL)

Admin

proposed a suitable architecture for the design of a model of object-relational database for it's implementation. The ... oriented and object-relational database so as to be able to apply them in ..... European pattern languages of programming.

Design and Implementation of GSM Based Transformer Phase ...

African Journals Online (AJOL)

In this work, the design and implementation of a transformer phase monitoring system, which continuously check for blown fuses on each phases of the distribution transformer was carried out. The system promptly reports any transformer with blown J&P fuse via a preprogrammed SMS which will state the location of the ...

Architectural design and analysis of a programmable image processor

International Nuclear Information System (INIS)

Siyal, M.Y.; Chowdhry, B.S.; Rajput, A.Q.K.

2003-01-01

In this paper we present an architectural design and analysis of a programmable image processor, nicknamed Snake. The processor was designed with a high degree of parallelism to speed up a range of image processing operations. Data parallelism found in array processors has been included into the architecture of the proposed processor. The implementation of commonly used image processing algorithms and their performance evaluation are also discussed. The performance of Snake is also compared with other types of processor architectures. (author)

Implementation of Traditional Malay Design Values in Contemporary Malay Houses

OpenAIRE

Elham Hosseini; Gurupiah Mursib; Raja Nafida Raja Shahminan

2016-01-01

Traditional houses are the most essential architectural experience that is in harmony with the people's culture, beliefs, environment and lifestyles. The development of design values in contemporary architecture by tracking traditional design values in architecture paves the way for arguments concerning the implementation of authentic Malay traditional house design values in contemporary Malay houses. In addition, it is hypothesized that the Malay traditional houses theoretically provide a co...

Radiation Safety Analysis In The NFEC For Assessing Possible Implementation Of The ICRP-60 Standard

International Nuclear Information System (INIS)

Yowono, I.

1998-01-01

Radiation safety analysis of the 3 facilities in the nuclear fuel element center (NFEC) for assessing possible implementation of the ICRP-60 standard has been done. The analysis has covered the radiation dose received by workers, dose rate in the working area, surface contamination level, air contamination level and the level of radioactive gas release to the environment. The analysis has been based on BATAN regulation and ICRP-60 standard. The result of the analysis has showed that the highest radiation dose received has been found to be only around 15% of the set value in the ICRP-60 standard and only 6% of the set value in the BATAN regulation. Thus the ICRP-60 as radiation safety standard could be implemented without changing the laboratory design

Design and implementation of BESIII online farm

International Nuclear Information System (INIS)

Li Fei; Zhu Kejun; Wang Liang; Liu Yingjie; Chinese Academy of Sciences, Beijing

2007-01-01

New Beijing spectrometer (BESIII) data acquisition (DAQ) system need handle the high data rates, high speed network transmission and high storage capability requirements. The design and implementation of the BESIII online computing farm with IBM blade server, Linux and other free software are presented. The cluster system is running well currently, able to meet the needs of BESIII experiment and achieved some important results as online software debugging and testing platform. (authors)

Randomized Controlled Trials in Music Therapy: Guidelines for Design and Implementation.

Science.gov (United States)

Bradt, Joke

2012-01-01

Evidence from randomized controlled trials (RCTs) plays a powerful role in today's healthcare industry. At the same time, it is important that multiple types of evidence contribute to music therapy's knowledge base and that the dialogue of clinical effectiveness in music therapy is not dominated by the biomedical hierarchical model of evidence-based practice. Whether or not one agrees with the hierarchical model of evidence in the current healthcare climate, RCTs can contribute important knowledge to our field. Therefore, it is important that music therapists are prepared to design trials that meet current methodological standards and, equally important, are able to respond appropriately to those design aspects that may not be feasible in music therapy research. To provide practical guidelines to music therapy researchers for the design and implementation of RCTs as well as to enable music therapists to be well-informed consumers of RCT evidence. This article reviews key design aspects of RCTs and discusses how to best implement these standards in music therapy trials. A systematic presentation of basic randomization methods, allocation concealment strategies, issues related to blinding in music therapy trials and strategies for implementation, the use of treatment manuals, types of control groups, outcome selection, and sample size computation is provided. Despite the challenges of meeting all key design demands typical of an RCT, it is possible to design rigorous music therapy RCTs that accurately estimate music therapy treatment benefits.

How to implement and apply robust design: insights from industrial practice

DEFF Research Database (Denmark)

Krogstie, Lars; Ebro, Martin; Howard, Thomas J.

2015-01-01

. Empirical findings are based on a series of semi-structured interviews with four major engineering companies in Northern Europe. We present why they were motivated to use RD, how it has been implemented and currently applied. Success factors for solving implementation challenges are also presented......Robust design (RD) is a framework for designing products and processes which perform consistently in spite of variations. Although it is well described in literature, research shows limited industrial application. The purpose of this paper is to describe and discuss industrial best-practice on RD...... have all been successful in using RD but with quite different approaches, depending on, for example, their organisational culture, and (3) Not just management commitment, but also true management competencies in RD are essential for a successful implementation. The paper is aimed at professionals...

Designing reversible arithmetic, logic circuit to implement micro-operation in quantum computation

International Nuclear Information System (INIS)

Kalita, Gunajit; Saikia, Navajit

2016-01-01

The futuristic computing is desired to be more power full with low-power consumption. That is why quantum computing has been a key area of research for quite some time and is getting more and more attention. Quantum logic being reversible, a significant amount of contributions has been reported on reversible logic in recent times. Reversible circuits are essential parts of quantum computers, and hence their designs are of great importance. In this paper, designs of reversible circuits are proposed using a recently proposed reversible gate for arithmetic and logic operations to implement various micro-operations (simple add and subtract, add with carry, subtract with borrow, transfer, incrementing, decrementing etc., and logic operations like XOR, XNOR, complementing etc.) in a reversible computer like quantum computer. The two new reversible designs proposed here for half adder and full adders are also used in the presented reversible circuits to implement various microoperations. The quantum costs of these designs are comparable. Many of the implemented micro-operations are not seen in previous literatures. The performances of the proposed circuits are compared with existing designs wherever available. (paper)

From heat integration targets toward implementation – A TSA (total site analysis)-based design approach for heat recovery systems in industrial clusters

International Nuclear Information System (INIS)

Hackl, Roman; Harvey, Simon

2015-01-01

The European process industry is facing major challenges to decrease production costs. One strategy to achieve this is by increasing energy efficiency. Single chemical processes are often well-integrated and the tools to target and design such measures are well developed. Site-wide heat integration based on total site analysis tools can be used to identify opportunities to further increase energy efficiency. However, the methodology has to be developed further in order to enable identification of practical heat integration measures in a systematic way. Designing site-wide heat recovery systems across an industrial cluster is complex and involves aspects apart from thermal process and utility flows. This work presents a method for designing a roadmap of heat integration investments based on total site analysis. The method is applied to a chemical cluster in Sweden. The results of the case study show that application of the proposed method can achieve up to 42% of the previously targeted hot utility savings of 129 MW. A roadmap of heat integration systems is suggested, ranging from less complex systems that achieve a minor share of the heat recovery potential to sophisticated, strongly interdependent systems demanding large investments and a high level of collaboration. - Highlights: • Methodology focused on the practical implementation of site-wide heat recovery. • Algorithm to determine a roadmap of heat integration investments. • Case study: 42% hot utility savings potential at a pay-back period of 3.9y.

Characterising Extrinsic Challenges Linked to the Design and Implementation of Inquiry-Based Practical Work

Science.gov (United States)

Akuma, Fru Vitalis; Callaghan, Ronel

2017-11-01

Inquiry-based science education has been incorporated in science curricula internationally. In this regard, however, many teachers encounter challenges. The challenges have been characterised into those linked to the personal characteristics of these teachers (intrinsic challenges) and others associated with contextual factors (extrinsic challenges). However, this level of characterisation is inadequate in terms of appreciating the complexity of the challenges, tracking of their development, and discovering knowledge within specific categories. Against this background, the purpose of the research presented here was to characterise extrinsic challenges linked to the design and implementation of inquiry-based practical work. In order to do so, we used a conceptual framework of teaching challenges based on Bronfenbrenner's ecological theory of human development. The data gathered using a multi-method case study of practical work in two South African high schools, was analysed by combining the data-driven inductive approach and the deductive a priori template of codes approach in thematic analysis. On this basis, the extrinsic challenges linked to the design and implementation of inquiry-based practical work that participants are confronted with, were found to consist of macrosystem challenges (such as a restrictive curriculum) and microsystem challenges. At the latter level, the challenges are material-related (e.g., lack of science education equipment and materials) or non-material-related (such as time constraints and the lack of access to interactive computer simulations). We have discussed the theory-, practice- and research-based implications of these results in relation to the design and implementation of inquiry-based practical work in South Africa and internationally.

DESIGN AND IMPLEMENTATION OF DYNAMIC SYMBOLS IN DYNAMIC GIS

Institute of Scientific and Technical Information of China (English)

无

2001-01-01

Many Internet-GIS have been implemented on the web and they are increasingly bec oming an important part of multimedia cartography that has much more users as co mpared to traditional GIS production media.Internet GIS technology has provided the GIS dynamic information acquisition w ith technical support.Also,the visualization technology of electronic map ha s provided tools for GIS symbols with dynamic characteristics.On the basis of GI S dynamic information acquisition,the design idea and implementation methods of dynamic symbols in dynamic GIS are presented in this article.

Design Innovations and Implementation Challenges - A Case of Smart Textiles in Future Hospital Interiors

DEFF Research Database (Denmark)

Mogensen, Jeppe; Jørgensen, Poul-Erik; Poulsen, Søren Bolvig

2014-01-01

Concerned with the overall challenges of implementing design innovations, this paper relates to the specific case of applying smart textiles in future hospital interiors. The methodological approach is inspired by design thinking and implementation processes, and through the scope of a developed ...

Implementation application Concerto in ANAV for planning design modifications

International Nuclear Information System (INIS)

Alonso, S.; Llona, S.

2014-01-01

The aim of this paper is to describe the process of implementation in ANAV of this methodology in engineering design, which has improved the results in the execution of projects by reducing multitasking, task synchronization and resources without detailed and fixed schedules. (Author)

Optimization of infobutton design and Implementation: A systematic review.

Science.gov (United States)

Teixeira, Miguel; Cook, David A; Heale, Bret S E; Del Fiol, Guilherme

2017-10-01

Infobuttons are clinical decision tools embedded in the electronic health record that attempt to link clinical data with context sensitive knowledge resources. We systematically reviewed technical approaches that contribute to improved infobutton design, implementation and functionality. We searched databases including MEDLINE, EMBASE, and the Cochrane Library database from inception to March 1, 2016 for studies describing the use of infobuttons. We selected full review comparative studies, usability studies, and qualitative studies examining infobutton design and implementation. We abstracted usability measures such as user satisfaction, impact, and efficiency, as well as prediction accuracy of infobutton content retrieval algorithms and infobutton adoption/interoperability. We found 82 original research studies on infobuttons. Twelve studies met criteria for detailed abstraction. These studies investigated infobutton interoperability (1 study); tools to help tailor infobutton functionality (1 study); interventions to improve user experience (7 studies); and interventions to improve content retrieval by improving prediction of relevant knowledge resources and information needs (3 studies). In-depth interviews with implementers showed the Health Level Seven (HL7) Infobutton standard to be simple and easy to implement. A usability study demonstrated the feasibility of a tool to help medical librarians tailor infobutton functionality. User experience studies showed that access to resources with which users are familiar increased user satisfaction ratings; and that links to specific subsections of drug monographs increased information seeking efficiency. However, none of the user experience improvements led to increased usage uptake. Recommender systems based on machine learning algorithms outperformed hand-crafted rules in the prediction of relevant resources and clinicians' information needs in a laboratory setting, but no studies were found using these techniques

Design and Implementation of Linux Access Control Model

Institute of Scientific and Technical Information of China (English)

Wei Xiaomeng; Wu Yongbin; Zhuo Jingchuan; Wang Jianyun; Haliqian Mayibula

2017-01-01

In this paper,the design and implementation of an access control model for Linux system are discussed in detail. The design is based on the RBAC model and combines with the inherent characteristics of the Linux system,and the support for the process and role transition is added.The core idea of the model is that the file is divided into different categories,and access authority of every category is distributed to several roles.Then,roles are assigned to users of the system,and the role of the user can be transited from one to another by running the executable file.

Implementation of a design and configuration management platform for fusion components on the Tore Supra WEST Project

Energy Technology Data Exchange (ETDEWEB)

Benoît, Fabrice, E-mail: fabrice-2.benoit@cea.fr [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Allegretti, Ludovic [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Aumeunier, Marie-Hélène [OPTIS, ZE de La Farlède, F-83078 Toulon Cedex 9 (France); Bucalossi, Jérôme; Doceul, Louis; Faïsse, Frederic; Firdaouss, Medhi; Geynet, Michel; Houtte, Didier van; Larroque, Sébastien; Magaud, Philippe; Maini, Patrick; Missirlian, Marc; Parrat, Hélène [CEA, IRFM, F-13108 Saint-Paul-lez-Durance (France); Robert, Julien [SOFYNE, F-69800 Saint Priest (France)

2014-10-15

Highlights: •A design and configuration management platform is under development for managing fusion components lifecycle at CEA. •Design platform ensures an efficient sharing of the data and provides connections between the different software and databases involved in fusion components design. •Design platform rollout on WEST project is ongoing as part of change control and configuration management implementation. -- Abstract: This paper presents the technical solutions and methodologies that are used and under development for managing the design lifecycle of the WEST project (W – for tungsten – Environment in Steady-state Tokamak, upgrade of Tore Supra's with actively cooled tungsten plasma facing components) fusion components and explains the interfaces that are implemented or in construction to connect together the different tools like documents management system, CAD modeler, or simulation codes around the data management backbone. It describes the methodologies used on the WEST project to optimize the design process by managing the engineering data workflow and ensuring the consistency between the different 3D representations for design or analysis as well as the specification or interfaces documents. Finally it explains how this platform contributes to reach the project targets in terms of performance, cost and schedule.

Implementation of a design and configuration management platform for fusion components on the Tore Supra WEST Project

International Nuclear Information System (INIS)

Benoît, Fabrice; Allegretti, Ludovic; Aumeunier, Marie-Hélène; Bucalossi, Jérôme; Doceul, Louis; Faïsse, Frederic; Firdaouss, Medhi; Geynet, Michel; Houtte, Didier van; Larroque, Sébastien; Magaud, Philippe; Maini, Patrick; Missirlian, Marc; Parrat, Hélène; Robert, Julien

2014-01-01

Highlights: •A design and configuration management platform is under development for managing fusion components lifecycle at CEA. •Design platform ensures an efficient sharing of the data and provides connections between the different software and databases involved in fusion components design. •Design platform rollout on WEST project is ongoing as part of change control and configuration management implementation. -- Abstract: This paper presents the technical solutions and methodologies that are used and under development for managing the design lifecycle of the WEST project (W – for tungsten – Environment in Steady-state Tokamak, upgrade of Tore Supra's with actively cooled tungsten plasma facing components) fusion components and explains the interfaces that are implemented or in construction to connect together the different tools like documents management system, CAD modeler, or simulation codes around the data management backbone. It describes the methodologies used on the WEST project to optimize the design process by managing the engineering data workflow and ensuring the consistency between the different 3D representations for design or analysis as well as the specification or interfaces documents. Finally it explains how this platform contributes to reach the project targets in terms of performance, cost and schedule

Implementation of outpatient schema therapy for borderline personality disorder: study design

Directory of Open Access Journals (Sweden)

van Asselt Thea

2009-10-01

Full Text Available Abstract Background Schema Therapy (ST is an integrative psychotherapy based upon a cognitive schema model which aims at identifying and changing dysfunctional schemas and modes through cognitive, experiential and behavioral pathways. It is specifically developed for patients with personality disorders. Its effectiveness and efficiency have been demonstrated in a few randomized controlled trials, but ST has not been evaluated in regular mental healthcare settings. This paper describes the study protocol of a multisite randomized 2-group design, aimed at evaluating the implementation of outpatient schema therapy for patients with borderline personality disorder (BPD in regular mental healthcare and at determining the added value of therapist telephone availability outside office hours in case of crisis. Methods/Design Patient outcome measures will be assessed with a semi-structured interview and self-report measures on BPD, therapeutic alliance, quality of life, costs and general psychopathology at baseline, 6, 12, 18 and 36 months. Intention-to-treat analyses will be executed with survival analysis for dichotomous variables, and one-sample t-tests and ANCOVAs for continuous variables with baseline as covariate and condition as between group factor. All tests will be two-tailed with a significance level of 5%. Discussion The study will provide an answer to the question whether ST can be effectively implemented and whether phone support by the therapist has an additional value. Trial Registration The Dutch Cochrane Center, NTR (TC = 1781.

Design and Implementation of MOD-6 Synchronous Counter using VHDL

Directory of Open Access Journals (Sweden)

P. Y. Dibal

2013-08-01

Full Text Available This paper deals with the design of a MOD-6 synchronous counter using VHDL (VHSIC Hardware Description Language. The VHSIC stands for Very High Speed Integrated Circuit. Using this approach, the behaviour of the counter is the most important aspect of the design. In the first section, the paper introduced counters in general, and their areas of specialization, like frequency synthesizers. The synchronous counter was then introduced, stating the behaviour of the flip-flops that make the counter. The modulus of a counter was defined. In the second section, the Xilinx ISE (Integrated Simulation Environment and the ISIM (Integrated Simulator were presented and briefly described with their respective snapshots. The structure of a typical VHDL code was presented, which included LIBRARY, ENTITY, and ARCHITECTURE. Each of these structures was then briefly described. The main work in this paper was then presented. The count sequence steps were stated as . VHDL was used to model the counter to count through six steps, outputting count values according to desired steps. The hardware implementation of the design was presented, where the implementation process was described, with a supporting diagram, followed by the floor-planning technique, in which the PORTS described in the VHDL design were assigned to the physical pins of the XC3S1000 FPGA (Field Programmable Gate Array chip. The final steps of the hardware implementation process were then presented. These include bitstream generation and download to target device. The third section of the paper presented the results obtained. Simulation/timing results of the design were presented, showing the output of the counter at each state with respect to the clock signal. The result of the synthesis of the design was presented, which showed the FPGA area with the exact location of the pins on the FPGA chip. Finally, the fourth section presented the conclusion arrived at, in respect of the design that was carried

Design and implementation of an inter-agency, multi-mission space flight operations network interface

Science.gov (United States)

Byrne, R.; Scharf, M.; Doan, D.; Liu, J.; Willems, A.

2004-01-01

An advanced network interface was designed and implemented by a team from the Jet Propulsion Lab with support from the European Space Operations Center. This poster shows the requirements for the interface, the design, the topology, the testing and lessons learned from the whole implementation.

Quasi-experimental designs in practice-based research settings: design and implementation considerations.

Science.gov (United States)

Handley, Margaret A; Schillinger, Dean; Shiboski, Stephen

2011-01-01

Although randomized controlled trials are often a gold standard for determining intervention effects, in the area of practice-based research (PBR), there are many situations in which individual randomization is not possible. Alternative approaches to evaluating interventions have received increased attention, particularly those that can retain elements of randomization such that they can be considered "controlled" trials. Methodological design elements and practical implementation considerations for two quasi-experimental design approaches that have considerable promise in PBR settings--the stepped-wedge design, and a variant of this design, a wait-list cross-over design, are presented along with a case study from a recent PBR intervention for patients with diabetes. PBR-relevant design features include: creation of a cohort over time that collects control data but allows all participants (clusters or patients) to receive the intervention; staggered introduction of clusters; multiple data collection points; and one-way cross-over into the intervention arm. Practical considerations include: randomization versus stratification, training run in phases; and extended time period for overall study completion. Several design features of practice based research studies can be adapted to local circumstances yet retain elements to improve methodological rigor. Studies that utilize these methods, such as the stepped-wedge design and the wait-list cross-over design, can increase the evidence base for controlled studies conducted within the complex environment of PBR.

Design and Implementation of Temperature Controller for a Vacuum Distiller

OpenAIRE

Muslim, M. Aziz; N., Goegoes Dwi; F., Ahmad Salmi; R., Akhbar Prachaessardhi

2014-01-01

This paper proposed design and implementation of temperature controller for a vacuum distiller. The distiller is aimed to provide distillation process of bioethanol in nearly vacuum condition. Due to varying vacuum pressure, temperature have to be controlled by manipulating AC voltage to heating elements. Two arduino based control strategies have been implemented, PID control and Fuzzy Logic control. Control command from the controller was translated to AC drive using TRIAC based dimmer circu...

Integrated Design and Implementation of Embedded Control Systems with Scilab.

Science.gov (United States)

Ma, Longhua; Xia, Feng; Peng, Zhe

2008-09-05

Embedded systems are playing an increasingly important role in control engineering. Despite their popularity, embedded systems are generally subject to resource constraints and it is therefore difficult to build complex control systems on embedded platforms. Traditionally, the design and implementation of control systems are often separated, which causes the development of embedded control systems to be highly timeconsuming and costly. To address these problems, this paper presents a low-cost, reusable, reconfigurable platform that enables integrated design and implementation of embedded control systems. To minimize the cost, free and open source software packages such as Linux and Scilab are used. Scilab is ported to the embedded ARM-Linux system. The drivers for interfacing Scilab with several communication protocols including serial, Ethernet, and Modbus are developed. Experiments are conducted to test the developed embedded platform. The use of Scilab enables implementation of complex control algorithms on embedded platforms. With the developed platform, it is possible to perform all phases of the development cycle of embedded control systems in a unified environment, thus facilitating the reduction of development time and cost.

Integrated Design and Implementation of Embedded Control Systems with Scilab

Directory of Open Access Journals (Sweden)

Zhe Peng

2008-09-01

Full Text Available Embedded systems are playing an increasingly important role in control engineering. Despite their popularity, embedded systems are generally subject to resource constraints and it is therefore difficult to build complex control systems on embedded platforms. Traditionally, the design and implementation of control systems are often separated, which causes the development of embedded control systems to be highly timeconsuming and costly. To address these problems, this paper presents a low-cost, reusable, reconfigurable platform that enables integrated design and implementation of embedded control systems. To minimize the cost, free and open source software packages such as Linux and Scilab are used. Scilab is ported to the embedded ARM-Linux system. The drivers for interfacing Scilab with several communication protocols including serial, Ethernet, and Modbus are developed. Experiments are conducted to test the developed embedded platform. The use of Scilab enables implementation of complex control algorithms on embedded platforms. With the developed platform, it is possible to perform all phases of the development cycle of embedded control systems in a unified environment, thus facilitating the reduction of development time and cost.

Non-linear analysis in Light Water Reactor design

International Nuclear Information System (INIS)

Rashid, Y.R.; Sharabi, M.N.; Nickell, R.E.; Esztergar, E.P.; Jones, J.W.

1980-03-01

The results obtained from a scoping study sponsored by the US Department of Energy (DOE) under the Light Water Reactor (LWR) Safety Technology Program at Sandia National Laboratories are presented. Basically, this project calls for the examination of the hypothesis that the use of nonlinear analysis methods in the design of LWR systems and components of interest include such items as: the reactor vessel, vessel internals, nozzles and penetrations, component support structures, and containment structures. Piping systems are excluded because they are being addressed by a separate study. Essentially, the findings were that nonlinear analysis methods are beneficial to LWR design from a technical point of view. However, the costs needed to implement these methods are the roadblock to readily adopting them. In this sense, a cost-benefit type of analysis must be made on the various topics identified by these studies and priorities must be established. This document is the complete report by ANATECH International Corporation

Design and implementation progress of multi-purpose simulator for nuclear research reactor using LabVIEW

International Nuclear Information System (INIS)

Arafa, Amany Abdel Aziz; Saleh, Hassan Ibrahim; Ashoub, Nagieb

2015-01-01

This paper illustrates the neutronic and thermal hydraulic models that were implemented in the nuclear research reactor simulator based on LabVIEW. It also describes the system and transient analysis of the simulator that takes into consideration the temperature effects and poisoning. This simulator is designed to be a multi-purpose in which the operator could understand the effects of the input parameters on the reactor. A designer can study different solutions for virtual reactor accident scenarios. The main features of the simulator are the flexibility to design and maintain the interface and the ability to redesign and remodel the reactor core engine. The developed reactor simulator permits to acquire hands-on the experience of the physics and technology of nuclear reactors including reactivity control, thermodynamics, technology design and safety system design. This simulator can be easily customizable and upgradable and new opportunities for collaboration between academic groups could be conducted.

Design and implementation progress of multi-purpose simulator for nuclear research reactor using LabVIEW

Energy Technology Data Exchange (ETDEWEB)

Arafa, Amany Abdel Aziz; Saleh, Hassan Ibrahim [Atomic Energy Authority, Cairo (Egypt). Radiation Engineering Dept.; Ashoub, Nagieb [Atomic Energy Authority, Cairo (Egypt). Nuclear Research Center

2015-11-15

This paper illustrates the neutronic and thermal hydraulic models that were implemented in the nuclear research reactor simulator based on LabVIEW. It also describes the system and transient analysis of the simulator that takes into consideration the temperature effects and poisoning. This simulator is designed to be a multi-purpose in which the operator could understand the effects of the input parameters on the reactor. A designer can study different solutions for virtual reactor accident scenarios. The main features of the simulator are the flexibility to design and maintain the interface and the ability to redesign and remodel the reactor core engine. The developed reactor simulator permits to acquire hands-on the experience of the physics and technology of nuclear reactors including reactivity control, thermodynamics, technology design and safety system design. This simulator can be easily customizable and upgradable and new opportunities for collaboration between academic groups could be conducted.

Microgrid Controller Design, Implementation, and Deployment: A Journey from Conception to Implementation at the Philadelphia Navy Yard

Energy Technology Data Exchange (ETDEWEB)

Uluski, R.; Kumar, J.; Venkata, S. S. Mani; Vishwakarma, D.; Schneider, K.; Mehrizi-Sani, Ali; Terry, Rudy; Agate, Will

2017-07-01

The Philadelphia Navy Yard is a fast-evolving community microgrid, currently home to over 150 companies and four Navy activity centers occupying nearly 7 million ft2 of buildings in which approximately 12,000 people are employed. The Navy Yard (TNY) is a national center of excellence for energy research, education, and commercialization, focused specifically on community microgrid design and development. TNY microgrid is equipped with the most cost-effective and sustainable means for meeting electric capacity and energy needs through renewable resources, energy efficiency, and distribution grid infrastructure. This article briefly describes how the community microgrid was conceived and planned to produce a great success story of microgrid implementation and the details of the design, development, and implementation of the TNY microgrid controller.

Employee impact and attitude analysis for GHS implementation in Taiwan.

Science.gov (United States)

Chang, Yi-Kuo; Su, Teh-Sheng; Ouyang, Yun; Tseng, Jo-Ming

2013-01-01

The employee impact and attitude analysis for GHS implementation in Taiwan was investigated in this study. An impact assessment on the new regulations or changes in regulations for government, potential costs, benefits, and the global trade in chemicals to industries and hazard communication program for workers was studied by the methods of the questionnaire design and Delphi expert method. A survey was conducted using questionnaires and taking 200 experts from government's expert database and 500 selected respondents from case company. Results from present study revealed that the barrier associated with GHS implementation is existed; it is feasible to overcome. Both experts and employees think that business entities are insufficient to test and classify chemicals on their own, and the technical guidance from the government is needed. Data analyzed by the logistic regression revealed that more hours an employee spends on education and trainings of new GHS systems; the employee thinks implementation of GHS will improve hazard awareness for transporters. The weak labeling ability affects deployment of the new GHS system.

Robust Design Impact Metrics: Measuring the effect of implementing and using Robust Design

DEFF Research Database (Denmark)

Ebro, Martin; Olesen, Jesper; Howard, Thomas J.

2014-01-01

Measuring the performance of an organisation’s product development process can be challenging due to the limited use of metrics in R&D. An organisation considering whether to use Robust Design as an integrated part of their development process may find it difficult to define whether it is relevant......, and afterwards measure the effect of having implemented it. This publication identifies and evaluates Robust Design-related metrics and finds that 2 metrics are especially useful: 1) Relative amount of R&D Resources spent after Design Verification and 2) Number of ‘change notes’ after Design Verification....... The metrics have been applied in a case company to test the assumptions made during the evaluation. It is concluded that the metrics are useful and relevant, but further work is necessary to make a proper overview and categorisation of different types of robustness related metrics....

Implementation of a Project-Based Telecommunications Engineering Design Course

Science.gov (United States)

Aliakbarian, Hadi; Soh, Ping Jack; Farsi, Saeed; Xu, Hantao; Van Lil, Emmanuel H. E. M. J. C.; Nauwelaers, Bart K. J. C.; Vandenbosch, Guy A. E.; Schreurs, Dominique M. M.-P.

2014-01-01

This paper describes and discusses the implementation of a project-based graduate design course in telecommunications engineering. This course, which requires a combination of technical and soft skills for its completion, enables guided independent learning (GIL) and application of technical knowledge acquired from classroom learning. Its main…

Institutional Design and the Implementation of the African Peace ...

African Journals Online (AJOL)

The relationship between, on the one hand, the design of the African Peace Security Architecture (APSA), and implementation of APSA's institutional provisions, on the other, remains less well understood, contrary to scholarly optimism on the future of security cooperation in Africa. For instance, security cooperation in ...

VLSI architecture and design for the Fermat Number Transform implementation

Energy Technology Data Exchange (ETDEWEB)

Pajayakrit, A.

1987-01-01

A new technique of sectioning a pipelined transformer, using the Fermat Number Transform (FNT), is introduced. Also, a novel VLSI design which overcomes the problems of implementing FNTs, for use in fast convolution/correlation, is described. The design comprises one complete section of a pipelined transformer and may be programmed to function at any point in a forward or inverse pipeline, so allowing the construction of a pipelined convolver or correlator using identical chips, thus the favorable properties of the transform can be exploited. This overcomes the difficulty of fitting a complete pipeline onto one chip without resorting to the use of several different designs. The implementation of high-speed convolver/correlator using the VLSI chips has been successfully developed and tested. For impulse response lengths of up to 16 points the sampling rates of 0.5 MHz can be achieved. Finally, the filter speed performance using the FNT chips is compared to other designs and conclusions drawn on the merits of the FNT for this application. Also, the advantages and limitations of the FNT are analyzed, with respect to the more conventional FFT, and the results are provided.

Incorporating Handling Qualities Analysis into Rotorcraft Conceptual Design

Science.gov (United States)

Lawrence, Ben

2014-01-01

This paper describes the initial development of a framework to incorporate handling qualities analyses into a rotorcraft conceptual design process. In particular, the paper describes how rotorcraft conceptual design level data can be used to generate flight dynamics models for handling qualities analyses. Also, methods are described that couple a basic stability augmentation system to the rotorcraft flight dynamics model to extend analysis to beyond that of the bare airframe. A methodology for calculating the handling qualities characteristics of the flight dynamics models and for comparing the results to ADS-33E criteria is described. Preliminary results from the application of the handling qualities analysis for variations in key rotorcraft design parameters of main rotor radius, blade chord, hub stiffness and flap moment of inertia are shown. Varying relationships, with counteracting trends for different handling qualities criteria and different flight speeds are exhibited, with the action of the control system playing a complex part in the outcomes. Overall, the paper demonstrates how a broad array of technical issues across flight dynamics stability and control, simulation and modeling, control law design and handling qualities testing and evaluation had to be confronted to implement even a moderately comprehensive handling qualities analysis of relatively low fidelity models. A key outstanding issue is to how to 'close the loop' with an overall design process, and options for the exploration of how to feedback handling qualities results to a conceptual design process are proposed for future work.

Designing a Deeply Digital Science Curriculum: Supporting Teacher Learning and Implementation with Organizing Technologies

Science.gov (United States)

Leary, Heather; Severance, Samuel; Penuel, William R.; Quigley, David; Sumner, Tamara; Devaul, Holly

2016-01-01

This paper examines the impacts of technology (e.g., Chromebooks, Google Drive) on teacher learning and student activity in the development and implementation of a deeply digital high school biology unit. Using design-based implementation research, teachers co-designed with researchers and curriculum specialists a student-centered unit aligned to…

Design optimization and uncertainty analysis of SMA morphing structures

International Nuclear Information System (INIS)

Oehler, S D; Hartl, D J; Lopez, R; Malak, R J; Lagoudas, D C

2012-01-01

The continuing implementation of shape memory alloys (SMAs) as lightweight solid-state actuators in morphing structures has now motivated research into finding optimized designs for use in aerospace control systems. This work proposes methods that use iterative analysis techniques to determine optimized designs for morphing aerostructures and consider the impact of uncertainty in model variables on the solution. A combination of commercially available and custom coded tools is utilized. ModelCenter, a suite of optimization algorithms and simulation process management tools, is coupled with the Abaqus finite element analysis suite and a custom SMA constitutive model to assess morphing structure designs in an automated fashion. The chosen case study involves determining the optimized configuration of a morphing aerostructure assembly that includes SMA flexures. This is accomplished by altering design inputs representing the placement of active components to minimize a specified cost function. An uncertainty analysis is also conducted using design of experiment methods to determine the sensitivity of the solution to a set of uncertainty variables. This second study demonstrates the effective use of Monte Carlo techniques to simulate the variance of model variables representing the inherent uncertainty in component fabrication processes. This paper outlines the modeling tools used to execute each case study, details the procedures for constructing the optimization problem and uncertainty analysis, and highlights the results from both studies. (paper)

Design and implement of BESIII online histogramming software

International Nuclear Information System (INIS)

Li Fei; Wang Liang; Liu Yingjie; Chinese Academy of Sciences, Beijing; Zhu Kejun; Zhao Jingwei

2007-01-01

The online histogramming software is an important part of the BESIII DAQ (Data Acquisition) system. This article introduces the main requirements and design of the online histogramming software and presents how to produce, transmit and gather histograms in the distributed environment in the current software implement. The article also illustrate one smart, simple and easy to expand way of setup with xml configure database. (authors)

Verification Process of Behavioral Consistency between Design and Implementation programs of pSET using HW-CBMC

International Nuclear Information System (INIS)

Lee, Dong Ah; Lee, Jong Hoon; Yoo, Jun Beom

2011-01-01

Controllers in safety critical systems such as nuclear power plants often use Function Block Diagrams (FBDs) to design embedded software. The design is implemented using programming languages such as C to compile it into particular target hardware. The implementation must have the same behavior with the design and the behavior should be verified explicitly. For example, the pSET (POSAFE-Q Software Engineering Tool) is a loader software to program POSAFE-Q PLC (Programmable Logic Controller) and is developed as a part of the KNICS (Korea Nuclear Instrumentation and Control System R and D Center) project. It uses FBDs to design software of PLC, and generates ANSI-C code to compile it into specific machine code. To verify the equivalence between the FBDs and ANSI-C code, mathematical proof of code generator or a verification tools such as RETRANS can help guarantee the equivalence. Mathematical proof, however, has a weakness that requires high expenditure and repetitive fulfillment whenever the translator is modified. On the other hand, RETRANS reconstructs the generated source code without consideration of the generator. It has also a weakness that the reconstruction of generated code needs additional analysis This paper introduces verification process of behavioral consistency between design and its implementation of the pSET using the HW-CBMC. The HW-CBMC is a formal verification tool, verifying equivalence between hardware and software description. It requires two inputs for checking equivalence, Verilog for hard-ware and ANSI-C for software. In this approach, FBDs are translated into semantically equivalent Verilog pro-gram, and the HW-CBMC verifies equivalence between the Verilog program and the ANSI-C program which is generated from the FBDs

Verification Process of Behavioral Consistency between Design and Implementation programs of pSET using HW-CBMC

Energy Technology Data Exchange (ETDEWEB)

Lee, Dong Ah; Lee, Jong Hoon; Yoo, Jun Beom [Konkuk University, Seoul (Korea, Republic of)

2011-05-15

Controllers in safety critical systems such as nuclear power plants often use Function Block Diagrams (FBDs) to design embedded software. The design is implemented using programming languages such as C to compile it into particular target hardware. The implementation must have the same behavior with the design and the behavior should be verified explicitly. For example, the pSET (POSAFE-Q Software Engineering Tool) is a loader software to program POSAFE-Q PLC (Programmable Logic Controller) and is developed as a part of the KNICS (Korea Nuclear Instrumentation and Control System R and D Center) project. It uses FBDs to design software of PLC, and generates ANSI-C code to compile it into specific machine code. To verify the equivalence between the FBDs and ANSI-C code, mathematical proof of code generator or a verification tools such as RETRANS can help guarantee the equivalence. Mathematical proof, however, has a weakness that requires high expenditure and repetitive fulfillment whenever the translator is modified. On the other hand, RETRANS reconstructs the generated source code without consideration of the generator. It has also a weakness that the reconstruction of generated code needs additional analysis This paper introduces verification process of behavioral consistency between design and its implementation of the pSET using the HW-CBMC. The HW-CBMC is a formal verification tool, verifying equivalence between hardware and software description. It requires two inputs for checking equivalence, Verilog for hard-ware and ANSI-C for software. In this approach, FBDs are translated into semantically equivalent Verilog pro-gram, and the HW-CBMC verifies equivalence between the Verilog program and the ANSI-C program which is generated from the FBDs

Adaptive Modeling, Engineering Analysis and Design of Advanced Aerospace Vehicles

Science.gov (United States)

Mukhopadhyay, Vivek; Hsu, Su-Yuen; Mason, Brian H.; Hicks, Mike D.; Jones, William T.; Sleight, David W.; Chun, Julio; Spangler, Jan L.; Kamhawi, Hilmi; Dahl, Jorgen L.

2006-01-01

This paper describes initial progress towards the development and enhancement of a set of software tools for rapid adaptive modeling, and conceptual design of advanced aerospace vehicle concepts. With demanding structural and aerodynamic performance requirements, these high fidelity geometry based modeling tools are essential for rapid and accurate engineering analysis at the early concept development stage. This adaptive modeling tool was used for generating vehicle parametric geometry, outer mold line and detailed internal structural layout of wing, fuselage, skin, spars, ribs, control surfaces, frames, bulkheads, floors, etc., that facilitated rapid finite element analysis, sizing study and weight optimization. The high quality outer mold line enabled rapid aerodynamic analysis in order to provide reliable design data at critical flight conditions. Example application for structural design of a conventional aircraft and a high altitude long endurance vehicle configuration are presented. This work was performed under the Conceptual Design Shop sub-project within the Efficient Aerodynamic Shape and Integration project, under the former Vehicle Systems Program. The project objective was to design and assess unconventional atmospheric vehicle concepts efficiently and confidently. The implementation may also dramatically facilitate physics-based systems analysis for the NASA Fundamental Aeronautics Mission. In addition to providing technology for design and development of unconventional aircraft, the techniques for generation of accurate geometry and internal sub-structure and the automated interface with the high fidelity analysis codes could also be applied towards the design of vehicles for the NASA Exploration and Space Science Mission projects.

Task 9. Deployment of photovoltaic technologies: co-operation with developing countries. PV for rural electrification in developing countries - Programme design, planning and implementation

Energy Technology Data Exchange (ETDEWEB)

Parker, W. [Institute for Sustainable Power, Highlands Ranch, CO (United States); Oldach, R.; Wilshaw, A. [IT Power Ltd, The Manor house, Chineham (United Kingdom)

2003-09-15

This report for the International Energy Agency (IEA) made by Task 9 of the Photovoltaic Power Systems (PVPS) programme takes a look at the design, planning and implementation of PV programmes. The guide contains details on the preparation for PV programmes, including the assessment of needs, stakeholder consultation, social context analysis, supply options and national policy considerations. The establishment of goals, delivery modes, timelines, logistics and quality assurance are discussed. Further, the implementation, monitoring and evaluation of PV programmes is discussed, as are a number of methodologies that have been developed with the aim of improving programme design and implementation. The guide highlights issues pertinent to rural energy programmes in developing countries and leads programme administrators through the process of planning, implementing and evaluating a PV programme.

Implementation of a management system in accordance with IAEA GS-R-3 Standard. A gap analysis

International Nuclear Information System (INIS)

Dicianu, I.; Oprea, M.

2009-01-01

Full text: The design and implementation of an Integrated Management System at SNN SA Headquarters become necessary as the CNCAN norms are already under revision to comply with the IAEA GS-R-3 standard. The purpose of this analysis is to draft a project for the transition from a Quality Management System (QMS) to an Integrated Management System (IMS) complying with GS-R-3 requirements. Four steps were identified for developing this project: STEP1 - To justify the necessity of the IMS implementation to meet the SNN SA Headquarters Top Management commitments. The requirements for implementing an IMS are analyzed and a comprehensive document is issued to (and maybe discussed with) SNN General Director in order to obtain the top management adherence/commitment to the project implementation. The document will show the strong and the weak points which should be considered in developing the project. The references for the project are: - IAEA Safety Standard GS-R-3 'The Management System for Facilities and Activities'; - ISO - 1400/2004 Standard 'Environmental Management System Requirements'; - OHSAS 18001/2007 Standard 'Occupational Health and Safety Management Systems. Requirements'; There are also considered: - IAEA Safety Guide GS-G-3.1 'Application of the Management System for Facilities and Activities'; - IAEA Draft Safety Guide DS-349 'Application of the Management System for Nuclear Facilities; There will be considered: Workshop 2 Bookmarks (F5) 2 - CNCAN Norms (as they will be revised); STEP2 - The performance of a comparative analysis of the requirements of GS-R-3, ISO 14001 and OHSAS 18001 versus the provisions of the QMS already implemented in SNN. This analysis is shown as a comparative table; STEP3 - Identification of the IMS processes. An overall analysis of the current processes described in the SNN QMS Manual is performed and based on this. There are identified the additional processes that have to be documented for the proper implementation of an IMS

Analysis and design of nuclear energy information systems

International Nuclear Information System (INIS)

Yohanes Dwi Anggoro; Sriyana; Arief Tris Yuliyanto; Wiku Lulus Widodo

2015-01-01

Management of research reports and activities of the Center for Nuclear Energy System Assessment (PKSEN), either in the form of documents and the results of other activities, are important part of the series of activities PKSEN mission achievement. Management of good documents will facilitate the provision of improved inputs or use the maximum results. But over the past few years, there are still some problem in the management of research reports and activities performed by PKSEN. The purpose of this study is to analyze and design flow layout of the Nuclear Energy Information System to facilitate the implementation of the Nuclear Energy Information System. In addition to be used as a research management system and PKSEN activities, it can also be used as information media for the community. Nuclear Energy Information System package is expected to be ''one gate systems for PKSEN information. The research methodology used are: (i) analysis of organizational systems, (ii) the analysis and design of information systems; (iii) the analysis and design of software systems; (iv) the analysis and design of database systems. The results of this study are: had identified and resources throughout the organization PKSEN activation, had analyzed the application of SIEN using SWOT analysis, had identified several types of devices required, had been compiled hierarchy of SIEN, had determined that the database system used is a centralized database system and had elections MySQL as DBMS. The result is a basic design of the Nuclear Energy Information System) which will used as a research and activities management system of PKSEN and also can be used as a medium of information for the community. (author)

The practical implementation of integrated safety management for nuclear safety analysis and fire hazards analysis documentation

International Nuclear Information System (INIS)

COLLOPY, M.T.

1999-01-01

In 1995 Mr. Joseph DiNunno of the Defense Nuclear Facilities Safety Board issued an approach to describe the concept of an integrated safety management program which incorporates hazard and safety analysis to address a multitude of hazards affecting the public, worker, property, and the environment. Since then the U S . Department of Energy (DOE) has adopted a policy to systematically integrate safety into management and work practices at all levels so that missions can be completed while protecting the public, worker, and the environment. While the DOE and its contractors possessed a variety of processes for analyzing fire hazards at a facility, activity, and job; the outcome and assumptions of these processes have not always been consistent for similar types of hazards within the safety analysis and the fire hazard analysis. Although the safety analysis and the fire hazard analysis are driven by different DOE Orders and requirements, these analyses should not be entirely independent and their preparation should be integrated to ensure consistency of assumptions, consequences, design considerations, and other controls. Under the DOE policy to implement an integrated safety management system, identification of hazards must be evaluated and agreed upon to ensure that the public. the workers. and the environment are protected from adverse consequences. The DOE program and contractor management need a uniform, up-to-date reference with which to plan. budget, and manage nuclear programs. It is crucial that DOE understand the hazards and risks necessarily to authorize the work needed to be performed. If integrated safety management is not incorporated into the preparation of the safety analysis and the fire hazard analysis, inconsistencies between assumptions, consequences, design considerations, and controls may occur that affect safety. Furthermore, confusion created by inconsistencies may occur in the DOE process to grant authorization of the work. In accordance with

Design and implementation of sigma–delta digital to analog converter

Indian Academy of Sciences (India)

Sonika

2018-06-01

Jun 1, 2018 ... Simulation results verify the superiority of the proposed modulator. Sampling rate ..... A MATLAB system level simulation is performed; fig- .... model and implement the design on to the FPGA. The .... J. Signal Process. Syst.

Design and Implementation of a Hybrid Ontological-Relational Data Repository for SIEM Systems

Directory of Open Access Journals (Sweden)

Igor Saenko

2013-07-01

Full Text Available The technology of Security Information and Event Management (SIEM becomes one of the most important research applications in the area of computer network security. The overall functionality of SIEM systems depends largely on the quality of solutions implemented at the data storage level, which is purposed for the representation of heterogeneous security events, their storage in the data repository, and the extraction of relevant data for analytical modules of SIEM systems. The paper discusses the key issues of design and implementation of a hybrid SIEM data repository, which combines relational and ontological data representations. Based on the analysis of existing SIEM systems and standards, the ontological approach is chosen as a core component of the repository, and an example of the ontological data model for vulnerabilities representation is outlined. The hybrid architecture of the repository is proposed for implementation in SIEM systems. Since the most of works on the repositories of SIEM systems is based on the relational data model, the paper focuses mainly on the ontological part of the hybrid approach. To test the repository we used the data model intended for attack modeling and security evaluation, which includes both ontological and relational dimensions.

NDARC-NASA Design and Analysis of Rotorcraft Theoretical Basis and Architecture

Science.gov (United States)

Johnson, Wayne

2010-01-01

The theoretical basis and architecture of the conceptual design tool NDARC (NASA Design and Analysis of Rotorcraft) are described. The principal tasks of NDARC are to design (or size) a rotorcraft to satisfy specified design conditions and missions, and then analyze the performance of the aircraft for a set of off-design missions and point operating conditions. The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated. The aircraft attributes are obtained from the sum of the component attributes. NDARC provides a capability to model general rotorcraft configurations, and estimate the performance and attributes of advanced rotor concepts. The software has been implemented with low-fidelity models, typical of the conceptual design environment. Incorporation of higher-fidelity models will be possible, as the architecture of the code accommodates configuration flexibility, a hierarchy of models, and ultimately multidisciplinary design, analysis and optimization.

Design and Analysis of a Micromachined LC Low Pass Filter For 2.4GHz Application

Science.gov (United States)

Saroj, Samruddhi R.; Rathee, Vishal R.; Pande, Rajesh S.

2018-02-01

This paper reports design and analysis of a passive low pass filter with cut-off frequency of 2.4 GHz using MEMS (Micro Electro-Mechanical Systems) technology. The passive components such as suspended spiral inductors and metal-insulator-metal (MIM) capacitor are arranged in T network form to implement LC low pass filter design. This design employs a simple approach of suspension thereby reducing parasitic losses to eliminate the performance degrading effects caused by integrating an off-chip inductor in the filter circuit proposed to be developed on a low cost silicon substrate using RF-MEMS components. The filter occupies only 2.1 mm x 0.66 mm die area and is designed using micro-strip transmission line placed on a silicon substrate. The design is implemented in High Frequency Structural Simulator (HFSS) software and fabrication flow is proposed for its implementation. The simulated results show that the design has an insertion loss of -4.98 dB and return loss of -2.60dB.

Requirement analysis of the safety-critical software implementation for the nuclear power plant

International Nuclear Information System (INIS)

Chang, Hoon Seon; Jung, Jae Cheon; Kim, Jae Hack; Nam, Sang Ku; Kim, Hang Bae

2005-01-01

The safety critical software shall be implemented under the strict regulation and standards along with hardware qualification. In general, the safety critical software has been implemented using functional block language (FBL) and structured language like C in the real project. Software design shall comply with such characteristics as; modularity, simplicity, minimizing the use of sub-routine, and excluding the interrupt logic. To meet these prerequisites, we used the computer-aided software engineering (CASE) tool to substantiate the requirements traceability matrix that were manually developed using Word processors or Spreadsheets. And the coding standard and manual have been developed to confirm the quality of software development process, such as; readability, consistency, and maintainability in compliance with NUREG/CR-6463. System level preliminary hazard analysis (PHA) is performed by analyzing preliminary safety analysis report (PSAR) and FMEA document. The modularity concept is effectively implemented for the overall module configurations and functions using RTP software development tool. The response time imposed on the basis of the deterministic structure of the safety-critical software was measured

Wearable Sensors; Applications, design and implementation

Science.gov (United States)

Mukhopadhyay, Subhas Chandra; Islam, Tarikul

2017-12-01

With the ability to monitor a vast range of physiological parameters, combined with wireless technology, wireless sensor networks and the Internet of Things, wearable sensors are revolutionising the field of digital health monitoring. In addition to applications in health monitoring, such technology is being used to monitor the state of our living environment and even the quality of our foods and the wellbeing of livestock. Written for scientists, engineers and practitioners by an international collection of authors, this book reviews the fundamentals of wearable sensors, their function, design, fabrication and implementation. Their application and advanced aspects including interface electronics and signal processing for easy interpretation of data, data transmission, data networking, data security, and privacy are also included.

Implementation of static generalized perturbation theory for LWR design applications

International Nuclear Information System (INIS)

Byron, R.F.; White, J.R.

1987-01-01

A generalized perturbation theory (GPT) formulation is developed for application to light water reactor (LWR) design. The extensions made to standard generalized perturbation theory are the treatment of thermal-hydraulic and fission product poisoning feedbacks, and criticality reset. This formulation has been implemented into a standard LWR design code. The method is verified by comparing direct calculations with GPT calculations. Data are presented showing that feedback effects need to be considered when using GPT for LWR problems. Some specific potential applications of this theory to the field of LWR design are discussed

Re-Design and Beat Testing of the Man-Machine Integration Design and Analysis System: MIDAS

Science.gov (United States)

Shively, R. Jay; Rutkowski, Michael (Technical Monitor)

1999-01-01

The Man-machine Design and Analysis System (MIDAS) is a human factors design and analysis system that combines human cognitive models with 3D CAD models and rapid prototyping and simulation techniques. MIDAS allows designers to ask 'what if' types of questions early in concept exploration and development prior to actual hardware development. The system outputs predictions of operator workload, situational awareness and system performance as well as graphical visualization of the cockpit designs interacting with models of the human in a mission scenario. Recently, MIDAS was re-designed to enhance functionality and usability. The goals driving the redesign include more efficient processing, GUI interface, advances in the memory structures, implementation of external vision models and audition. These changes were detailed in an earlier paper. Two Beta test sites with diverse applications have been chosen. One Beta test site is investigating the development of a new airframe and its interaction with the air traffic management system. The second Beta test effort will investigate 3D auditory cueing in conjunction with traditional visual cueing strategies including panel-mounted and heads-up displays. The progress and lessons learned on each of these projects will be discussed.

Research in advanced formal theorem-proving techniques. [design and implementation of computer languages

Science.gov (United States)

Raphael, B.; Fikes, R.; Waldinger, R.

1973-01-01

The results are summarised of a project aimed at the design and implementation of computer languages to aid in expressing problem solving procedures in several areas of artificial intelligence including automatic programming, theorem proving, and robot planning. The principal results of the project were the design and implementation of two complete systems, QA4 and QLISP, and their preliminary experimental use. The various applications of both QA4 and QLISP are given.

Framework for the impact analysis and implementation of Clinical Prediction Rules (CPRs)

LENUS (Irish Health Repository)

Wallace, Emma

2011-10-14

Abstract Clinical Prediction Rules (CPRs) are tools that quantify the contribution of symptoms, clinical signs and available diagnostic tests, and in doing so stratify patients according to the probability of having a target outcome or need for a specified treatment. Most focus on the derivation stage with only a minority progressing to validation and very few undergoing impact analysis. Impact analysis studies remain the most efficient way of assessing whether incorporating CPRs into a decision making process improves patient care. However there is a lack of clear methodology for the design of high quality impact analysis studies. We have developed a sequential four-phased framework based on the literature and the collective experience of our international working group to help researchers identify and overcome the specific challenges in designing and conducting an impact analysis of a CPR. There is a need to shift emphasis from deriving new CPRs to validating and implementing existing CPRs. The proposed framework provides a structured approach to this topical and complex area of research.

Energy efficiency analysis and implementation of AES on an FPGA

Science.gov (United States)

Kenney, David

The Advanced Encryption Standard (AES) was developed by Joan Daemen and Vincent Rjimen and endorsed by the National Institute of Standards and Technology in 2001. It was designed to replace the aging Data Encryption Standard (DES) and be useful for a wide range of applications with varying throughput, area, power dissipation and energy consumption requirements. Field Programmable Gate Arrays (FPGAs) are flexible and reconfigurable integrated circuits that are useful for many different applications including the implementation of AES. Though they are highly flexible, FPGAs are often less efficient than Application Specific Integrated Circuits (ASICs); they tend to operate slower, take up more space and dissipate more power. There have been many FPGA AES implementations that focus on obtaining high throughput or low area usage, but very little research done in the area of low power or energy efficient FPGA based AES; in fact, it is rare for estimates on power dissipation to be made at all. This thesis presents a methodology to evaluate the energy efficiency of FPGA based AES designs and proposes a novel FPGA AES implementation which is highly flexible and energy efficient. The proposed methodology is implemented as part of a novel scripting tool, the AES Energy Analyzer, which is able to fully characterize the power dissipation and energy efficiency of FPGA based AES designs. Additionally, this thesis introduces a new FPGA power reduction technique called Opportunistic Combinational Operand Gating (OCOG) which is used in the proposed energy efficient implementation. The AES Energy Analyzer was able to estimate the power dissipation and energy efficiency of the proposed AES design during its most commonly performed operations. It was found that the proposed implementation consumes less energy per operation than any previous FPGA based AES implementations that included power estimations. Finally, the use of Opportunistic Combinational Operand Gating on an AES cipher

Co-design and implementation research: challenges and solutions for ethics committees.

Science.gov (United States)

Goodyear-Smith, Felicity; Jackson, Claire; Greenhalgh, Trisha

2015-11-16

Implementation science research, especially when using participatory and co-design approaches, raises unique challenges for research ethics committees. Such challenges may be poorly addressed by approval and governance mechanisms that were developed for more traditional research approaches such as randomised controlled trials. Implementation science commonly involves the partnership of researchers and stakeholders, attempting to understand and encourage uptake of completed or piloted research. A co-creation approach involves collaboration between researchers and end users from the onset, in question framing, research design and delivery, and influencing strategy, with implementation and broader dissemination strategies part of its design from gestation. A defining feature of co-creation is its emergent and adaptive nature, making detailed pre-specification of interventions and outcome measures impossible. This methodology sits oddly with ethics committee protocols that require precise pre-definition of interventions, mode of delivery, outcome measurements, and the role of study participants. But the strict (and, some would say, inflexible) requirements of ethics committees were developed for a purpose - to protect participants from harm and help ensure the rigour and transparency of studies. We propose some guiding principles to help square this circle. First, ethics committees should acknowledge and celebrate the diversity of research approaches, both formally (through training) and informally (by promoting debate and discussion); without active support, their members may not understand or value participatory designs. Second, ground rules should be established for co-design applications (e.g. how to judge when 'consultation' or 'engagement' becomes research) and communicated to committee members and stakeholders. Third, the benefits of power-sharing should be recognised and credit given to measures likely to support this important goal, especially in research with

Implementing an Antibiotic Stewardship Information System to Improve Hospital Infection Control: A Co-Design Process.

Science.gov (United States)

Maia, Mélanie R; Simões, Alexandra; Lapão, Luís V

2018-01-01

HAITooL information system design and implementation was based on Design Science Research Methodology, ensuring full participation, in close collaboration, of researchers and a multidisciplinary team of healthcare professionals. HAITooL enables effective monitoring of antibiotic resistance, antibiotic use and provides an antibiotic prescription decision-supporting system by clinicians, strengthening the patient safety procedures. The design, development and implementation process reveals benefits in organizational and behavior change with significant success. Leadership commitment multidisciplinary team and mainly informaticians engagement was crucial to the implementation process. Participants' motivation and the final product delivery and evolution depends on that.

The Investigation of NPP Control and Monitoring Functional Analysis Applied to Functional Displays’ Implementation

International Nuclear Information System (INIS)

Yan, J.

2015-01-01

NPP Control and Monitoring System has been recognised as extreme and safe as well as large scale product, thus it was one of the most major design activities that fully, accurately and operationally functional analysis. The results of functional analysis would be employed as initial instruction through the whole lifecycle of NPP Control and Monitoring System. In this paper, it was discovered that several disadvantages of present functional analysis methods included FAST, The Subtract and Operate Procedure and Functional Procedure Method; owing to the identity methods enveloped here was the combination of Functional Tree and System Structure, as well as its decomposition steps; and RCS Inventory Control function which is defined as one of the most significant control functions in Advanced Light Water Reactor Utility Requirement Document has been employed to demonstrate the feasibility of this method; the analysis results of RCS Inventory function has been applied to direct the design and implementation of related displays, here the functional display of RCS Inventory Control function has been implemented on NuCON which is originated by SNPAS. Owing to the analyzing results, it would be ensured that the accuracy of information displayed to operators, thus the operator would be aware the condition of systems and then make the proper move to ensure the safety and productivity of NPP based on the received data. (author)

Design and implementation of a Smart Measurement System for AMI in the microgrid of the University of Nariño

Directory of Open Access Journals (Sweden)

Andrés F. Arciniegas M.

2017-02-01

Full Text Available This project describes a proposed Measure Management System, from the design stage to the implementation of a prototype smart meter, adapted to operate in the microgrid at the University of Nariño. This device features a constant record of measures, with resolution of 24 bits, sufficient to perform power quality analysis. In addition, it is integrated into the SCADA system through the open protocols MODBUS, DNP3 and IEC 61850, with scheduled cybersecurity techniques. Likewise, several management platforms for the monitoring of electrical variables and control over the current flow to the loads is designed. Finally, two study cases show the application of the implemented measure management system in the microgrid.

LVTTL Based Energy Efficient Watermark Generator Design and Implementation on FPGA

DEFF Research Database (Denmark)

Pandey, Bishwajeet; Kaur, Amanpreet; Kumar, Tanesh

2014-01-01

-transistor logic (LVTTL) IO standard is used in this design to make it power optimized. This design is implemented on Kintex-7 FPGA, Device XC7K70T and -3 speed grades. When we are scaling the device operating frequency from 100GHz to 5GHz, there is 94.93% saving in total power of the watermark generator...

Design and Testing of an Agricultural Implement for Underground Application of Rodenticide Bait

Directory of Open Access Journals (Sweden)

Hugo Malón

2015-01-01

Full Text Available An agricultural implement for underground application of rodenticide bait to control the Mediterranean pocket gopher (Microtus Duodecimcostatus in fruit orchards has been designed and tested. The main objective of this research was to design and test the implement by using the finite element method (FEM and considering a range of loads generated on most commonly used furrow openers in agricultural implements. As a second step, the prototype was tested in the field by analysing the effects of forward speed and application depth on the mechanical behaviour of the implement structure. The FEM was used in the design phase and a prototype was manufactured. The structural strains on the prototype chassis under working conditions were tested by using strain gauges to validate the design phase. Three forward speeds (4.5, 5.5, and 7.0 km/h, three application depths (0.12, 0.15, and 0.17 m, and two types of soil (clayey-silty-loam and clayey-silty-sandy were considered. The prototype was validated successfully by analysing the information obtained from the strain gauges. The Von Mises stresses indicated a safety coefficient of 1.9 for the most critical load case. Although both forward speed and application depth had a significant effect on the stresses generated on the chassis, the latter parameter critically affected the structural behaviour of the implement. The effects of the application depth on the strains were linear such that strains increased with depth. In contrast, strains remained roughly constant regardless of variation in the forward speed.

Spectrum analysis on quality requirements consideration in software design documents.

Science.gov (United States)

Kaiya, Haruhiko; Umemura, Masahiro; Ogata, Shinpei; Kaijiri, Kenji

2013-12-01

Software quality requirements defined in the requirements analysis stage should be implemented in the final products, such as source codes and system deployment. To guarantee this meta-requirement, quality requirements should be considered in the intermediate stages, such as the design stage or the architectural definition stage. We propose a novel method for checking whether quality requirements are considered in the design stage. In this method, a technique called "spectrum analysis for quality requirements" is applied not only to requirements specifications but also to design documents. The technique enables us to derive the spectrum of a document, and quality requirements considerations in the document are numerically represented in the spectrum. We can thus objectively identify whether the considerations of quality requirements in a requirements document are adapted to its design document. To validate the method, we applied it to commercial software systems with the help of a supporting tool, and we confirmed that the method worked well.

Implementing ergonomics in large-scale engineering design. Communicating and negotiating requirements in an organizational context

Energy Technology Data Exchange (ETDEWEB)

Wulff, Ingrid Anette

1997-12-31

This thesis investigates under what conditions ergonomic criteria are being adhered to in engineering design. Specifically, the thesis discusses (1) the ergonomic criteria implementation process, (2) designer recognition of ergonomic requirements and the organization of ergonomics, (3) issues important for the implementation of ergonomic requirements, (4) how different means for experience transfer in design and operation are evaluated by the designers, (5) how designers ensure usability of offshore work places, and (6) how project members experience and cope with the large amount of documentation in large-scale engineering. 84 refs., 11 figs., 18 tabs.

Design and Implementation of BDS RTCM SSR Message

Science.gov (United States)

Xiao, Xia; Cheng, Fang; Liu, Feng; Lu, XiaoChun

2017-09-01

Based on the real-time differential positioning system of Beidou wide area, a set of Beidou high-precision differential information transmission protocol is studied and designed. After the system generates satellite precise orbit and clock difference products, it needs to be sent to the users in a certain data format through C band GEO communication satellite. The transport protocol should be designed according to the data volume and update rate of the system. At the same time, it is necessary to combine the signal system, satellite resources and the restriction and restriction of the receiver implementation technology. It refers to the relevant fields and international similar systems of technology and standards to design. This paper establishes a set of technical indicators which can measure the pros and cons of differential message organization and broadcasting strategy. Through modeling, simulation and actual test, this paper makes a comprehensive comparison of different strategies. Finally, a transmission protocol design scheme which has good performance and meets the system service requirements is presented.

Designing for cooperation at a Radio Station

DEFF Research Database (Denmark)

Kensing, F.; Simonsen, Jesper; Bødker, Keld

1997-01-01

We address computer support for work and its coordination in one of the radio channels of the Danish Broadcasting Corporation. Based upon ethnographically inspired analysis and participatory design techniques, we propose design solutions now implemented or under implementation. We focus on cooper......We address computer support for work and its coordination in one of the radio channels of the Danish Broadcasting Corporation. Based upon ethnographically inspired analysis and participatory design techniques, we propose design solutions now implemented or under implementation. We focus...

A RFID specific participatory design approach to support design and implementation of real-time location systems in the operating room.

Science.gov (United States)

Guédon, A C P; Wauben, L S G L; de Korne, D F; Overvelde, M; Dankelman, J; van den Dobbelsteen, J J

2015-01-01

Information technology, such as real-time location (RTL) systems using Radio Frequency IDentification (RFID) may contribute to overcome patient safety issues and high costs in healthcare. The aim of this work is to study if a RFID specific Participatory Design (PD) approach supports the design and the implementation of RTL systems in the Operating Room (OR). A RFID specific PD approach was used to design and implement two RFID based modules. The Device Module monitors the safety status of OR devices and the Patient Module tracks the patients' locations during their hospital stay. The PD principles 'multidisciplinary team', 'participation users (active involvement)' and 'early adopters' were used to include users from the RFID company, the university and the hospital. The design and implementation process consisted of two 'structured cycles' ('iterations'). The effectiveness of this approach was assessed by the acceptance in terms of level of use, continuity of the project and purchase. The Device Module included eight strategic and twelve tactical actions and the Patient Module included six strategic and twelve tactical actions. Both modules are now used on a daily basis and are purchased by the hospitals for continued use. The RFID specific PD approach was effective in guiding and supporting the design and implementation process of RFID technology in the OR. The multidisciplinary teams and their active participation provided insights in the social and the organizational context of the hospitals making it possible to better fit the technology to the hospitals' (future) needs.

The design and implementation of the FreeBSD operating system

CERN Document Server

McKusick, Marshall Kirk; Watson, Robert N M

2015-01-01

The most complete, authoritative technical guide to the FreeBSD kernel's internal structure has now been extensively updated to cover all major improvements between Versions 5 and 11. Approximately one-third of this edition's content is completely new, and another one-third has been extensively rewritten. Three long-time FreeBSD project leaders begin with a concise overview of the FreeBSD kernel's current design and implementation. Next, they cover the FreeBSD kernel from the system-call level down-from the interface to the kernel to the hardware. Explaining key design decisions, they detail the concepts, data structures, and algorithms used in implementing each significant system facility, including process management, security, virtual memory, the I/O system, filesystems, socket IPC, and networking. This Second Edition * Explains highly scalable and lightweight virtualization using FreeBSD jails, and virtual-machine acceleration with Xen and Virtio device paravirtualization * Describes new security features...

Design of microprocessor-based hardware for number theoretic transform implementation

Energy Technology Data Exchange (ETDEWEB)

Anwar Ahmed Shamim

1985-01-01

The Winograd (1976) Fourier Transform algorithm (WFTA) was implemented on a TMS9900 microprocessor to compute NTTs. Since multiplication conducted modulo m is very time consuming a special purpose external hardware modular multiplier was designed, constructed and interfaced with the TMS9900 microprocessor. This external hardware modular multiplier allowed an improvement in the transform execution time. Computation time may further be reduced by employing several microprocessors. Taking advantage of the inherent parallelism of the WFTA, a dedicated parallel microprocessor system was designed and constructed to implement a 15-point WFTA in parallel. Benchmark programs were written to choose a suitable microprocessor for the parallel microprocessor system. A master or a host microprocessor is used to control the parallel microprocessor system and provides an interface to the outside world. An analogue to digital (a/d) and a digital to analogue (d/a) converter allows real time digital signal processing.

Quantum mechanics implementation in drug-design workflows: does it really help? [Corrigendum

Directory of Open Access Journals (Sweden)

Arodola OA

2017-11-01

Full Text Available Arodola OA, Soliman MES. Quantum mechanics implementation in drug-design workflows: does it really help? Drug Design, Development and Therapy. 2017;11:2551–2564.Figure 3 on page 2557 contains errors. The correct figure is shown.Read the original article

Low-voltage CMOS operational amplifiers theory, design and implementation

CERN Document Server

Sakurai, Satoshi

1995-01-01

Low-Voltage CMOS Operational Amplifiers: Theory, Design and Implementation discusses both single and two-stage architectures. Opamps with constant-gm input stage are designed and their excellent performance over the rail-to-rail input common mode range is demonstrated. The first set of CMOS constant-gm input stages was introduced by a group from Technische Universiteit, Delft and Universiteit Twente, the Netherlands. These earlier versions of circuits are discussed, along with new circuits developed at the Ohio State University. The design, fabrication (MOSIS Tiny Chips), and characterization of the new circuits are now complete. Basic analog integrated circuit design concepts should be understood in order to fully appreciate the work presented. However, the topics are presented in a logical order and the circuits are explained in great detail, so that Low-Voltage CMOS Operational Amplifiers can be read and enjoyed by those without much experience in analog circuit design. It is an invaluable reference boo...

Technical and economic effect analysis of advanced MMIS implementation in KNGR

International Nuclear Information System (INIS)

Choe, Il Nam

1997-01-01

KNGR MMIS design approaches are summarized as follows: 1) compact workstation type operator console design to reduce the operators' physical and cognitive work loads by implementing Factors Engineering (HFE) principles and advanced graphic user interface technologies. 2) Full digital control and protection system design to enhance the reliability operability and maintainability. 3) Remote signal multiplexer implementation to reduce the hard-wired cable and cable installation cost and time. 4) Licensable design to meet latest licensing requirements including HFE and safety software validation and verification. 5 refs., 1 tab., 1 fig

Design and implementation of DSP based solar converter for photovoltaic systems

Energy Technology Data Exchange (ETDEWEB)

Caliskan, Eser [TUBITAK - MRC, Kocaeli (Turkey). Energy Inst.; Ustun, Ozgur [Istanbul Technical Univ., Maslak (Turkey). Electrical Engineering Dept.

2012-07-01

This study discusses the design and implementation of a DSP controlled converter for photovoltaic system that can track the maximum power point, charge and discharge the battery. In the designed system, the boost converter operates the photovoltaic panels at the maximum power point and the bi-directional battery charger charges and discharges the battery bank as demanded. All required switching and control signals for these converters provided by the high performance C2000 series DSP produced by the Texas Instruments. The current, voltage and temperature data are collected by sensors from power stages by using DSP algorithms and the control signals are generated by the embedded software. The load bus is kept at constant voltage by the bi-directional battery charger. The boost converter is controlled by MPPT algorithms and the current sharing or battery charge modes are implemented depending on the radiation value. The designed photovoltaic system performance is verified by simulation and some experiments. (orig.)

Design and implementation of a data acquisition system for the study of dynamics signals in the time Domain

International Nuclear Information System (INIS)

Daza, Arnoldo; Hinojosa, Ana; Diaz, Xavier; Neira, Oscar

2011-01-01

The purpose of this research was to design and implement a data acquisition system for the study of dynamic signals in the time in order of nanoseconds, through the use of electronic instrumentation to obtain the temporal profiles of light signals, such as pulses of light from a laser or fluorescent light signals. To carry out the design and implementation of the data acquisition system proposed, we used a rapid response transducer and a data acquisition card of high speed. As well, it was developed a graphical user interface for visualization, analysis and study of the data acquired. Thus, it was possible to perform the digitization of a pulse on the order of nanoseconds, as well as the acquisition of fluorescence signals of different wavelengths, from which to obtain theoretical and experimental valuable knowledge based on the physics of spectroscopy.

Direct implementation of an axial-flow helium gas turbine tool in a system analysis tool for HTGRs

International Nuclear Information System (INIS)

Kim, Ji Hwan; No, Hee Cheon; Kim, Hyeun Min; Lim, Hong Sik

2008-01-01

This study concerns the development of dynamic models for a high-temperature gas-cooled reactor (HTGR) through direct implementation of a gas turbine analysis code with a transient analysis code. We have developed a streamline curvature analysis code based on the Newton-Raphson numerical application (SANA) to analyze the off-design performance of helium gas turbines under conditions of normal operation. The SANA code performs a detailed two-dimensional analysis by means of throughflow calculation with allowances for losses in axial-flow multistage compressors and turbines. To evaluate the performance in the steady-state and load transient of HTGRs, we developed GAMMA-T by implementing SANA in the transient system code, GAMMA, which is a multidimensional, multicomponent analysis tool for HTGRs. The reactor, heat exchangers, and connecting pipes were designed with a one-dimensional thermal-hydraulic model that uses the GAMMA code. We assessed GAMMA-T by comparing its results with the steady-state results of the GTHTR300 of JAEA. We concluded that the results are in good agreement, including the results of the vessel cooling bypass flow and the turbine cooling flow

Design and implementation of a project-based active/cooperative engineering design course for freshmen

Science.gov (United States)

Abdulaal, R. M.; Al-Bahi, A. M.; Soliman, A. Y.; Iskanderani, F. I.

2011-08-01

A project-based active/cooperative design course is planned, implemented, assessed and evaluated to achieve several desired engineering outcomes. The course allows freshman-level students to gain professional hands-on engineering design experience through an opportunity to practise teamwork, quality principles, communication skills, life-long learning, realistic constraints and awareness of current domestic and global challenges. Throughout successive design reports and in-class assignments, the students are required by the end of the semester to communicate, clearly and concisely, the details of their design both orally and in writing through a functional artefact/prototype, a design notebook, an A0 project poster and a final oral presentation. In addition to these direct assessment tools, several indirect measures are used to ensure triangulation. Assignments are based on customer expectations using a detailed checklist. This paper shows the direct and indirect assessment tools that indicated a high level of achievement of course learning outcomes and a high level of student satisfaction.

Design and FPGA-implementation of multilayer neural networks with on-chip learning

International Nuclear Information System (INIS)

Haggag, S.S.M.Y

2008-01-01

Artificial Neural Networks (ANN) is used in many applications in the industry because of their parallel structure, high speed, and their ability to give easy solution to complicated problems. For example identifying the orange and apple in the sorting machine with neural network is easier than using image processing techniques to do the same thing. There are different software for designing, training, and testing the ANN, but in order to use the ANN in the industry, it should be implemented on hardware outside the computer. Neural networks are artificial systems inspired on the brain's cognitive behavior, which can learn tasks with some degree of complexity, such as signal processing, diagnosis, robotics, image processing, and pattern recognition. Many applications demand a high computing power and the traditional software implementation are not sufficient.This thesis presents design and FPGA implementation of Multilayer Neural Networks with On-chip learning in re-configurable hardware. Hardware implementation of neural network algorithm is very interesting due their high performance and they can easily be made parallel. The architecture proposed herein takes advantage of distinct data paths for the forward and backward propagation stages and a pipelined adaptation of the on- line backpropagation algorithm to significantly improve the performance of the learning phase. The architecture is easily scalable and able to cope with arbitrary network sizes with the same hardware. The implementation is targeted diagnosis of the Research Reactor accidents to avoid the risk of occurrence of a nuclear accident. The proposed designed circuits are implemented using Xilinx FPGA Chip XC40150xv and occupied 73% of Chip CLBs. It achieved 10.8 μs to take decision in the forward propagation compared with current software implemented of RPS which take 24 ms. The results show that the proposed architecture leads to significant speed up comparing to high end software solutions. On

Design and Implementation of O/C relay using Microprocessor

Directory of Open Access Journals (Sweden)

Dr.Abdul-Sattar H. Jasim

2012-03-01

Full Text Available This work presents the design and implementation of a versatile digital overcurrent (O/C relay using a single microprocessor. The relay is implemented by a combination of a look-up table and a counter. The software development and hardware testing are done using a microcomputer module based on a 8-bit microprocessor. The digital processing of measured currents enables a separate setting of operating values selection of all types of inverse or constant time characteristics overcurrent protection. This protection provides reasonably fast tripping, even at terminal close to the power source were the most serve faults can occur excluding the transient condition. So this method has an excellent compromise between accuracy hardware and speed

Design and implementation of Skype USB user gateway software

Science.gov (United States)

Qi, Yang

2017-08-01

With the widespread application of VoIP, the client with private protocol becomes more and more popular. Skype is one of the representatives. How to connect Skype with PSTN just by Skype client has gradually become hot. This paper design and implement the software based on a kind of USB User Gateway. With the software Skype user can freely communicate with PSTN phone. FSM is designed as the core of the software, and Skype control is separated by the USB Gateway control. In this way, the communication becomes more flexible and efficient. In the actual user testing, the software obtains good results.

Population Health Metrics Research Consortium gold standard verbal autopsy validation study: design, implementation, and development of analysis datasets

Directory of Open Access Journals (Sweden)

Ohno Summer

2011-08-01

Full Text Available Abstract Background Verbal autopsy methods are critically important for evaluating the leading causes of death in populations without adequate vital registration systems. With a myriad of analytical and data collection approaches, it is essential to create a high quality validation dataset from different populations to evaluate comparative method performance and make recommendations for future verbal autopsy implementation. This study was undertaken to compile a set of strictly defined gold standard deaths for which verbal autopsies were collected to validate the accuracy of different methods of verbal autopsy cause of death assignment. Methods Data collection was implemented in six sites in four countries: Andhra Pradesh, India; Bohol, Philippines; Dar es Salaam, Tanzania; Mexico City, Mexico; Pemba Island, Tanzania; and Uttar Pradesh, India. The Population Health Metrics Research Consortium (PHMRC developed stringent diagnostic criteria including laboratory, pathology, and medical imaging findings to identify gold standard deaths in health facilities as well as an enhanced verbal autopsy instrument based on World Health Organization (WHO standards. A cause list was constructed based on the WHO Global Burden of Disease estimates of the leading causes of death, potential to identify unique signs and symptoms, and the likely existence of sufficient medical technology to ascertain gold standard cases. Blinded verbal autopsies were collected on all gold standard deaths. Results Over 12,000 verbal autopsies on deaths with gold standard diagnoses were collected (7,836 adults, 2,075 children, 1,629 neonates, and 1,002 stillbirths. Difficulties in finding sufficient cases to meet gold standard criteria as well as problems with misclassification for certain causes meant that the target list of causes for analysis was reduced to 34 for adults, 21 for children, and 10 for neonates, excluding stillbirths. To ensure strict independence for the validation of

Design and Implementation of a Dual-Mass MEMS Gyroscope with High Shock Resistance.

Science.gov (United States)

Gao, Yang; Huang, Libin; Ding, Xukai; Li, Hongsheng

2018-03-30

This paper presents the design and implementation of a dual-mass MEMS gyroscope with high shock resistance by improving the in-phase frequency of the gyroscope and by using a two-stage elastic stopper mechanism and proposes a Simulink shock model of the gyroscope equipped with the two-stage stopper mechanism, which is a very efficient method to evaluate the shock resistance of the gyroscope. The structural design takes into account both the mechanical sensitivity and the shock resistance. The design of the primary structure and the analysis of the stopper mechanism are first introduced. Based on the expression of the restoring force of the stopper beam, the analytical shock response model of the gyroscope is obtained. By this model, the shock response of the gyroscope is theoretically analyzed, and the appropriate structural parameters are obtained. Then, the correctness of the model is verified by finite element (FE) analysis, where the contact collision analysis is introduced in detail. The simulation results show that the application of the two-stage elastic stopper mechanism can effectively improve the shock resistance by more than 1900 g and 1500 g in the x - and y -directions, respectively. Finally, experimental verifications are carried out by using a machete hammer on the micro-gyroscope prototype fabricated by the deep dry silicon on glass (DDSOG) technology. The results show that the shock resistance of the prototype along the x -, y - and z -axes all exceed 10,000 g. Moreover, the output of the gyroscope can return to normal in about 2 s.

NASA-Langley Research Center's Aircraft Condition Analysis and Management System Implementation

Science.gov (United States)

Frye, Mark W.; Bailey, Roger M.; Jessup, Artie D.

2004-01-01

This document describes the hardware implementation design and architecture of Aeronautical Radio Incorporated (ARINC)'s Aircraft Condition Analysis and Management System (ACAMS), which was developed at NASA-Langley Research Center (LaRC) for use in its Airborne Research Integrated Experiments System (ARIES) Laboratory. This activity is part of NASA's Aviation Safety Program (AvSP), the Single Aircraft Accident Prevention (SAAP) project to develop safety-enabling technologies for aircraft and airborne systems. The fundamental intent of these technologies is to allow timely intervention or remediation to improve unsafe conditions before they become life threatening.

Electronic health records challenges in design and implementation

CERN Document Server

Sittig, Dean F

2013-01-01

This book provides an overview of the challenges in electronic health records (EHR) design and implementation along with an introduction to the best practices that have been identified over the past several years. The book examines concerns surrounding EHR use and proposes eight examples of proper EHR use. It discusses the complex strategic planning that accompanies the systemic organizational changes associated with EHR programs and highlights key lessons learned regarding health information-including technology errors and risk management concerns.

Handbook of virtual environments design, implementation, and applications

CERN Document Server

Hale, Kelly S

2014-01-01

This second edition of a bestseller presents systematic and extensive coverage of the primary areas of research and development within VE technology. It brings together a comprehensive set of contributed articles that address the principles required to define system requirements and design, build, evaluate, implement, and manage the effective use of VE applications. The contributors provide critical insights and principles associated with their given area of expertise to provide extensive scope and detail on VE technology.

An optical model for implementing Parrondo’s game and designing stochastic game with long-term memory

International Nuclear Information System (INIS)

Si Tieyan

2012-01-01

Highlights: ► Using a photon propagating through a designed array of beam splitters to simulate Parrondo’s game paradox. ► Design the optical flowchart for implementing Parrondo history-dependent game paradox. ► Design new game with long-term memory on a designed tree lattice and loop lattice. - Abstract: An optical model for a photon propagating through a designed array of beam splitters is developed to give a physical implementation of Parrondo’s game and Parrondo’s history-dependent game. The winner in this optical model is a photon passed the beam splitter. The loser is a photon being reflected by the beam splitter. The optical beam splitter is the coin-tosser. We designed new games with long-term memory by using this optical diagram method. The optical output of the combined game of two losing games could be a win, or a loss, or an oscillation between win and loss. The modern technology to implement this optical model is well developed. A circularly polarized photon is a possible candidate for this physical implementation in laboratory.

Design and implementation experience of seismic upgrades at Kozloduy and Paks NPPs

Energy Technology Data Exchange (ETDEWEB)

Borov, V; Trichkov, V; Alexandrov, A; Jordanov, M [EQE-Bulgaria, Sofia (Bulgaria)

1995-07-01

Series of upgrades have been designed and implemented by EQE-Bulgaria at Kozloduy NPP and as a subcontractor of EQE-International - at Paks NPP. Wide variety of facilities have been upgraded, including Electrical Equipment, Control and Instrumentation Equipment, Technological Equipment, Brick Walls and Building Structures. Different design approaches and concepts have been applied in compliance with the specific technological and structural conditions. The effect of the excitation intensity as well as the presence of specific floor response spectra over the upgrading concept and cost is discussed. Specific problems of supporting heavy technological equipment are noted. A practical approach for seismic upgrading of Brick Walls, as well as a tendency for unification of the engineering design is shown. The first completely upgraded Building Structure at Kozloduy NPP is the structure of the Electrical Control Building to the Diesel Generator of the River-bank Pump Station. Specific problems of the implementation of the final upgrading design of the Diesel Generator Building are outlined. (author)

Client Server design and implementation issues in the Accelerator Control System environment

International Nuclear Information System (INIS)

Sathe, S.; Hoff, L.; Clifford, T.

1995-01-01

In distributed system communication software design, the Client Server model has been widely used. This paper addresses the design and implementation issues of such a model, particularly when used in Accelerator Control Systems. in designing the Client Server model one needs to decide how the services will be defined for a server, what types of messages the server will respond to, which data formats will be used for the network transactions and how the server will be located by the client. Special consideration needs to be given to error handling both on the server and client side. Since the server usually is located on a machine other than the client, easy and informative server diagnostic capability is required. The higher level abstraction provided by the Client Server model simplifies the application writing, however fine control over network parameters is essential to improve the performance. Above mentioned design issues and implementation trade-offs are discussed in this paper

Design and implementation experience of seismic upgrades at Kozloduy and Paks NPPs

International Nuclear Information System (INIS)

Borov, V.; Trichkov, V.; Alexandrov, A.; Jordanov, M.

1995-01-01

Series of upgrades have been designed and implemented by EQE-Bulgaria at Kozloduy NPP and as a subcontractor of EQE-International - at Paks NPP. Wide variety of facilities have been upgraded, including Electrical Equipment, Control and Instrumentation Equipment, Technological Equipment, Brick Walls and Building Structures. Different design approaches and concepts have been applied in compliance with the specific technological and structural conditions. The effect of the excitation intensity as well as the presence of specific floor response spectra over the upgrading concept and cost is discussed. Specific problems of supporting heavy technological equipment are noted. A practical approach for seismic upgrading of Brick Walls, as well as a tendency for unification of the engineering design is shown. The first completely upgraded Building Structure at Kozloduy NPP is the structure of the Electrical Control Building to the Diesel Generator of the River-bank Pump Station. Specific problems of the implementation of the final upgrading design of the Diesel Generator Building are outlined. (author)

Design and Implementation of Wideband Exciter for an Ultra-high Resolution Airborne SAR System

Directory of Open Access Journals (Sweden)

Jia Ying-xin

2013-03-01

Full Text Available According to an ultra-high resolution airborne SAR system with better than 0.1 m resolution, a wideband Linear Frequency Modulated (LFM pulse compression exciter with 14.8 GHz carrier and 3.2 GHz bandwidth is designed and implemented. The selection of signal generation scheme and some key technique points for wideband LFM waveform is presented in detail. Then, an acute test and analysis of the LFM signal is performed. The final airborne experiments demonstrate the validity of the LFM source which is one of the subsystems in an ultra-high resolution airborne SAR system.

Design and implementation of the GPS subsystem for the Radio Aurora eXplorer

Science.gov (United States)

Spangelo, Sara C.; Bennett, Matthew W.; Meinzer, Daniel C.; Klesh, Andrew T.; Arlas, Jessica A.; Cutler, James W.

2013-06-01

This paper presents the design and implementation of the Global Positioning System (GPS) subsystem for the Radio Aurora eXplorer (RAX) CubeSat. The GPS subsystem provides accurate temporal and spatial information necessary to satisfy the science objectives of the RAX mission. There are many challenges in the successful design and implementation of a GPS subsystem for a CubeSat-based mission, including power, size, mass, and financial constraints. This paper presents an approach for selecting and testing the individual and integrated GPS subsystem components, including the receiver, antenna, low noise amplifier, and supporting circuitry. The procedures to numerically evaluate the GPS link budget and test the subsystem components at various stages of system integration are described. Performance results for simulated tests in the terrestrial and orbital environments are provided, including start-up times, carrier-to-noise ratios, and orbital position accuracy. Preliminary on-orbit GPS results from the RAX-1 and RAX-2 spacecraft are presented to validate the design process and pre-flight simulations. Overall, this paper provides a systematic approach to aid future satellite designers in implementing and verifying GPS subsystems for resource-constrained small satellites.

A cloud-based X73 ubiquitous mobile healthcare system: design and implementation.

Science.gov (United States)

Ji, Zhanlin; Ganchev, Ivan; O'Droma, Máirtín; Zhang, Xin; Zhang, Xueji

2014-01-01

Based on the user-centric paradigm for next generation networks, this paper describes a ubiquitous mobile healthcare (uHealth) system based on the ISO/IEEE 11073 personal health data (PHD) standards (X73) and cloud computing techniques. A number of design issues associated with the system implementation are outlined. The system includes a middleware on the user side, providing a plug-and-play environment for heterogeneous wireless sensors and mobile terminals utilizing different communication protocols and a distributed "big data" processing subsystem in the cloud. The design and implementation of this system are envisaged as an efficient solution for the next generation of uHealth systems.

Implementing and Assessing a Flipped Classroom Model for First-Year Engineering Design

Science.gov (United States)

Saterbak, Ann; Volz, Tracy; Wettergreen, Matthew

2016-01-01

Faculty at Rice University are creating instructional resources to support teaching first-year engineering design using a flipped classroom model. This implementation of flipped pedagogy is unusual because content-driven, lecture courses are usually targeted for flipping, not project-based design courses that already incorporate an abundance of…

Designing and Implementing a Mentoring Program to Support Clinically-Based Teacher Education

Science.gov (United States)

Henning, John E.; Gut, Dianne; Beam, Pamela

2015-01-01

This article describes one teacher preparation program's approach to designing and implementing a mentoring program to support clinically-based teacher education. The design for the program is based on an interview study that compared the mentoring experiences of 18 teachers across three different contexts: student teaching, early field…

Implementing a Mobile Social Media Framework for Designing Creative Pedagogies

Directory of Open Access Journals (Sweden)

Thomas Cochrane

2014-08-01

Full Text Available The rise of mobile social media provides unique opportunities for new and creative pedagogies. Pedagogical change requires a catalyst, and we argue that mobile social media can be utilized as such a catalyst. However, the mobile learning literature is dominated by case studies that retrofit traditional pedagogical strategies and pre-existing course activities onto mobile devices and social media. From our experiences of designing and implementing a series of mobile social media projects, the authors have developed a mobile social media framework for creative pedagogies. We illustrate the implementation of our mobile social media framework within the development of a new media minor (an elective set of four courses that explicitly integrates the unique technical and pedagogical affordances of mobile social media, with a focus upon student-generated content and student-determined learning (heutagogy. We argue that our mobile social media framework is potentially transferable to a range of educational contexts, providing a simple design framework for new pedagogies.

NDARC NASA Design and Analysis of Rotorcraft. Appendix 6; Input

Science.gov (United States)

Johnson, Wayne

2017-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool that supports both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet specified requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft configurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates configuration flexibility, a hierarchy of models, and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with low-fidelity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance calculation, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft configurations is facilitated, while retaining the capability to model novel and advanced concepts. Specific rotorcraft configurations considered are single-main-rotor and tail

NDARC NASA Design and Analysis of Rotorcraft - Input, Appendix 2

Science.gov (United States)

Johnson, Wayne

2016-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool that supports both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet specified requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft configurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates configuration exibility, a hierarchy of models, and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with low-fidelity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance calculation, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft configurations is facilitated, while retaining the capability to model novel and advanced concepts. Specific rotorcraft configurations considered are single-main-rotor and tail

NDARC NASA Design and Analysis of Rotorcraft. Appendix 5; Theory

Science.gov (United States)

Johnson, Wayne

2017-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool that supports both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet specified requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft configurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates configuration flexibility, a hierarchy of models, and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with low-fidelity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance calculation, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft configurations is facilitated, while retaining the capability to model novel and advanced concepts. Specific rotorcraft configurations considered are single-main-rotor and tail

NDARC NASA Design and Analysis of Rotorcraft Theory Appendix 1

Science.gov (United States)

Johnson, Wayne

2016-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool that supports both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet specified requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft configurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates configuration flexibility, a hierarchy of models, and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with low-fidelity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy specified design conditions and missions. The analysis tasks can include off-design mission performance calculation, flight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft configurations is facilitated, while retaining the capability to model novel and advanced concepts. Specific rotorcraft configurations considered are single-main-rotor and tail

NDARC: NASA Design and Analysis of Rotorcraft. Appendix 3; Theory

Science.gov (United States)

Johnson, Wayne

2016-01-01

The NASA Design and Analysis of Rotorcraft (NDARC) software is an aircraft system analysis tool that supports both conceptual design efforts and technology impact assessments. The principal tasks are to design (or size) a rotorcraft to meet speci?ed requirements, including vertical takeoff and landing (VTOL) operation, and then analyze the performance of the aircraft for a set of conditions. For broad and lasting utility, it is important that the code have the capability to model general rotorcraft con?gurations, and estimate the performance and weights of advanced rotor concepts. The architecture of the NDARC code accommodates con?guration ?exibility, a hierarchy of models, and ultimately multidisciplinary design, analysis, and optimization. Initially the software is implemented with low-?delity models, typically appropriate for the conceptual design environment. An NDARC job consists of one or more cases, each case optionally performing design and analysis tasks. The design task involves sizing the rotorcraft to satisfy speci?ed design conditions and missions. The analysis tasks can include off-design mission performance calculation, ?ight performance calculation for point operating conditions, and generation of subsystem or component performance maps. For analysis tasks, the aircraft description can come from the sizing task, from a previous case or a previous NDARC job, or be independently generated (typically the description of an existing aircraft). The aircraft consists of a set of components, including fuselage, rotors, wings, tails, and propulsion. For each component, attributes such as performance, drag, and weight can be calculated; and the aircraft attributes are obtained from the sum of the component attributes. Description and analysis of conventional rotorcraft con?gurations is facilitated, while retaining the capability to model novel and advanced concepts. Speci?c rotorcraft con?gurations considered are single-main-rotor and tail-rotor helicopter

Collaborative learning in higher education : design, implementation and evaluation of group learning activities

NARCIS (Netherlands)

Hei, de M.S.A.

2016-01-01

In higher education, group learning activities (GLAs) are frequently implemented in online, blended or face-to-face educational contexts. A major problem for the design and implementation of good quality GLAs that lead to the desired learning outcomes is that many approaches to GLAs have been

Preliminary conceptual design and analysis on KALIMER reactor structures

International Nuclear Information System (INIS)

Kim, Jong Bum

1996-10-01

The objectives of this study are to perform preliminary conceptual design and structural analyses for KALIMER (Korea Advanced Liquid Metal Reactor) reactor structures to assess the design feasibility and to identify detailed analysis requirements. KALIMER thermal hydraulic system analysis results and neutronic analysis results are not available at present, only-limited preliminary structural analyses have been performed with the assumptions on the thermal loads. The responses of reactor vessel and reactor internal structures were based on the temperature difference of core inlet and outlet and on engineering judgments. Thermal stresses from the assumed temperatures were calculated using ANSYS code through parametric finite element heat transfer and elastic stress analyses. While, based on the results of preliminary conceptual design and structural analyses, the ASME Code limits for the reactor structures were satisfied for the pressure boundary, the needs for inelastic analyses were indicated for evaluation of design adequacy of the support barrel and the thermal liner. To reduce thermal striping effects in the bottom are of UIS due to up-flowing sodium form reactor core, installation of Inconel-718 liner to the bottom area was proposed, and to mitigate thermal shock loads, additional stainless steel liner was also suggested. The design feasibilities of these were validated through simplified preliminary analyses. In conceptual design phase, the implementation of these results will be made for the design of the reactor structures and the reactor internal structures in conjunction with the thermal hydraulic, neutronic, and seismic analyses results. 4 tabs., 24 figs., 4 refs. (Author)

High performance integer arithmetic circuit design on FPGA architecture, implementation and design automation

CERN Document Server

Palchaudhuri, Ayan

2016-01-01

This book describes the optimized implementations of several arithmetic datapath, controlpath and pseudorandom sequence generator circuits for realization of high performance arithmetic circuits targeted towards a specific family of the high-end Field Programmable Gate Arrays (FPGAs). It explores regular, modular, cascadable, and bit-sliced architectures of these circuits, by directly instantiating the target FPGA-specific primitives in the HDL. Every proposed architecture is justified with detailed mathematical analyses. Simultaneously, constrained placement of the circuit building blocks is performed, by placing the logically related hardware primitives in close proximity to one another by supplying relevant placement constraints in the Xilinx proprietary “User Constraints File”. The book covers the implementation of a GUI-based CAD tool named FlexiCore integrated with the Xilinx Integrated Software Environment (ISE) for design automation of platform-specific high-performance arithmetic circuits from us...

The implementation of health promotion in primary and community care: a qualitative analysis of the 'Prescribe Vida Saludable' strategy.

Science.gov (United States)

Martinez, Catalina; Bacigalupe, Gonzalo; Cortada, Josep M; Grandes, Gonzalo; Sanchez, Alvaro; Pombo, Haizea; Bully, Paola

2017-02-17

The impact of lifestyle on health is undeniable and effective healthy lifestyle promotion interventions do exist. However, this is not a fundamental part of routine primary care clinical practice. We describe factors that determine changes in performance of primary health care centers involved in piloting the health promotion innovation 'Prescribe Vida Saludable' (PVS) phase II. We engaged four primary health care centers of the Basque Healthcare Service in an action research project aimed at changing preventive health practices. Prescribe Healthy Life (PVS from the Spanish "Prescribe Vida Saludable) is focused on designing, planning, implementing and evaluating innovative programs to promote multiple healthy habits, feasible to be performed in routine primary health care conditions. After 2 years of piloting, centers were categorized as having high, medium, or low implementation effectiveness. We completed qualitative inductive and deductive analysis of five focus groups with the staff of the centers. Themes generated through consensual grounded qualitative analysis were compared between centers to identify the dimensions that explain the variation in actual implementation of PVS, and retrospectively organized and assessed against the Consolidated Framework for Implementation Research (CFIR). Of the 36 CFIR constructs, 11 were directly related to the level of implementation performance: intervention source, evidence strength and quality, adaptability, design quality and packaging, tension for change, learning climate, self-efficacy, planning, champions, executing, and reflecting and evaluating, with -organizational tracking added as a new sub-construct. Additionally, another seven constructs emerged in the participants' discourse but were not related to center performance: relative advantage, complexity, patients' needs and resources, external policy and incentives, structural characteristics, available resources, and formally appointed internal implementation

Canes Implementation: Analysis of Budgetary, Business, and Policy Challenges

Science.gov (United States)

2014-12-01

NAVAL POSTGRADUATE SCHOOL MONTEREY, CALIFORNIA MBA PROFESSIONAL REPORT CANES IMPLEMENTATION: ANALYSIS OF BUDGETARY, BUSINESS...REPORT TYPE AND DATES COVERED December 2014 MBA Professional Rep01t 4. TITLE AND SUBTITLE 5. FUNDING NUMBERS CANES IMPLEMENTATION: ANALYSIS OF...PERFORMING ORGANIZATION Naval Postgraduate School REPORT NUMBER Monterey, CA 93943-5000 9. SPONSORING /MONITORING AGENCY NAME(S) AND ADDRESS(ES) 10

An integrated 3D design, modeling and analysis resource for SSC detector systems

International Nuclear Information System (INIS)

DiGiacomo, N.J.; Adams, T.; Anderson, M.K.; Davis, M.; Easom, B.; Gliozzi, J.; Hale, W.M.; Hupp, J.; Killian, K.; Krohn, M.; Leitch, R.; Lajczok, M.; Mason, L.; Mitchell, J.; Pohlen, J.; Wright, T.

1989-01-01

Integrated computer aided engineering and design (CAE/CAD) is having a significant impact on the way design, modeling and analysis is performed, from system concept exploration and definition through final design and integration. Experience with integrated CAE/CAD in high technology projects of scale and scope similar to SSC detectors leads them to propose an integrated computer-based design, modeling and analysis resource aimed specifically at SSC detector system development. The resource architecture emphasizes value-added contact with data and efficient design, modeling and analysis of components, sub-systems or systems with fidelity appropriate to the task. They begin with a general examination of the design, modeling and analysis cycle in high technology projects, emphasizing the transition from the classical islands of automation to the integrated CAE/CAD-based approach. They follow this with a discussion of lessons learned from various attempts to design and implement integrated CAE/CAD systems in scientific and engineering organizations. They then consider the requirements for design, modeling and analysis during SSC detector development, and describe an appropriate resource architecture. They close with a report on the status of the resource and present some results that are indicative of its performance. 10 refs., 7 figs

Design and Implementation of a New Real-Time Frequency Sensor Used as Hardware Countermeasure

Directory of Open Access Journals (Sweden)

Manuel Pedro-Carrasco

2013-09-01

Full Text Available A new digital countermeasure against attacks related to the clock frequency is presented. This countermeasure, known as frequency sensor, consists of a local oscillator, a transition detector, a measurement element and an output block. The countermeasure has been designed using a full-custom technique implemented in an Application-Specific Integrated Circuit (ASIC, and the implementation has been verified and characterized with an integrated design using a 0.35 mm standard Complementary Metal Oxide Semiconductor (CMOS technology (Very Large Scale Implementation—VLSI implementation. The proposed solution is configurable in resolution time and allowed range of period, achieving a minimum resolution time of only 1.91 ns and an initialization time of 5.84 ns. The proposed VLSI implementation shows better results than other solutions, such as digital ones based on semi-custom techniques and analog ones based on band pass filters, all design parameters considered. Finally, a counter has been used to verify the good performance of the countermeasure in avoiding the success of an attack.

[Design and implementation of the ELSA-Brasil biobank: a prospective study in a Brazilian population].

Science.gov (United States)

Pereira, Alexandre C; Bensenor, Isabela M; Fedeli, Ligia M; Castilhos, Cristina; Vidigal, Pedro G; Maniero, Viviane; Leite, Claudia M; Pimentel, Robercia A; Duncan, Bruce B; Mill, Jose Geraldo; Lotufo, Paulo A

2013-06-01

The Brazilian Longitudinal Study for Adult Health (ELSA-Brasil) is a multicenter prospective cohort of civil servants designed to assess the determinants of chronic diseases, especially cardiovascular diseases and type 2 diabetes. The present article describes the main design and implementation points of the ELSA-Brasil biobank project. Economic, political, logistical and technological aspects of this study are characterized. Additionally, it discusses the final biorepository protocol and the facilities implemented to achieve this objective. The design and implementation process of the ELSA-Brasil biobank took three years to be performed. Both the central and local biobanks were built according to the best biorepository techniques, using different technological solutions for the distinct needs expected in this study.

Design and implementation of STD32-BUS based reactor protection trip unit on FPGA imbaby

International Nuclear Information System (INIS)

Mahmoud, I.; Elnokity, O.A.; Refai, M.K.

2007-01-01

This paper presents a way to design and implement the Trip Unit of a Reactor Protection System (RPS) using a Field Programmable Gate Arrays (FPGA). Instead of the traditional embedded Microprocessor based interface design method, a proposed tailor made FPGA based circuit is built to substitute the Trip Unit (TL1) existing in Egypt's 2' ' Research reactor ETRR-2. The existing embedded system is built around the STD32 field Computer Bus which used in industrial and process control applications. It is modular, rugged, reliable, and easy-to-use and is able to support a large mix of I/O cards and to easily change its configuration in the future. Therefore, the state machine of this bus is extracted from its timing diagrams and implemented in VHDL to interface the designed TU circuit. The proposed designed circuit implemented using ALTERA EPF10K10LC84-3 chip replaces the Single Board Computer which have the embedded SAY program of the TU providing the same integrated HAV and SAV functions implemented in FPGA Chip housed in an printed circuit board, which uses the same shape and specifications of STD32 boards. H/W implementation of both TU and STD32 Bus in VHDL addresses the issues of safety and reusability

Design and Implementation of a Web Based System for Orphanage ...

African Journals Online (AJOL)

We analyzed and examined the public perception of having a web based information system for orphanage management and also designed and implemented a web based system for management of orphanages. The system we developed keeps track of orphanages, the orphans, the helps received by the orphanages and ...

Uncertainty analysis and design optimization of hybrid rocket motor powered vehicle for suborbital flight

Directory of Open Access Journals (Sweden)

Zhu Hao

2015-06-01

Full Text Available In this paper, we propose an uncertainty analysis and design optimization method and its applications on a hybrid rocket motor (HRM powered vehicle. The multidisciplinary design model of the rocket system is established and the design uncertainties are quantified. The sensitivity analysis of the uncertainties shows that the uncertainty generated from the error of fuel regression rate model has the most significant effect on the system performances. Then the differences between deterministic design optimization (DDO and uncertainty-based design optimization (UDO are discussed. Two newly formed uncertainty analysis methods, including the Kriging-based Monte Carlo simulation (KMCS and Kriging-based Taylor series approximation (KTSA, are carried out using a global approximation Kriging modeling method. Based on the system design model and the results of design uncertainty analysis, the design optimization of an HRM powered vehicle for suborbital flight is implemented using three design optimization methods: DDO, KMCS and KTSA. The comparisons indicate that the two UDO methods can enhance the design reliability and robustness. The researches and methods proposed in this paper can provide a better way for the general design of HRM powered vehicles.

Designing Caregiver-Implemented Shared-Reading Interventions to Overcome Implementation Barriers

Science.gov (United States)

Logan, Jessica R.; Damschroder, Laura

2015-01-01

Purpose This study presents an application of the theoretical domains framework (TDF; Michie et al., 2005), an integrative framework drawing on behavior-change theories, to speech-language pathology. Methods A multistep procedure was used to identify barriers affecting caregivers' implementation of shared-reading interventions with their children with language impairment (LI). The authors examined caregiver-level data corresponding to implementation issues from two randomized controlled trials and mapped these to domains in the TDF as well as empirically validated behavior-change techniques. Results Four barriers to implementation were identified as potentially affecting caregivers' implementation: time pressures, reading difficulties, discomfort with reading, and lack of awareness of benefits. These were mapped to 3 TDF domains: intentions, beliefs about capabilities, and skills. In turn, 4 behavior-change techniques were identified as potential vehicles for affecting these domains: reward, feedback, model, and encourage. An ongoing study is described that is determining the effects of these techniques for improving caregivers' implementation of a shared-reading intervention. Conclusions A description of the steps to identifying barriers to implementation, in conjunction with an ongoing experiment that will explicitly determine whether behavior-change techniques affect these barriers, provides a model for how implementation science can be used to identify and overcome implementation barriers in the treatment of communication disorders. PMID:26262941

Implementing Set Based Design into Department of Defense Acquisition

Science.gov (United States)

2016-12-01

The team employed a tailored waterfall process model in order to explore SBD applications in the support of defense acquisition and PORs. Figure 1...Engineering Model . Additionally, the team reviewed DOD case studies that implemented SBD. The SBD principles, along with the common themes from the...acquisition. 14. SUBJECT TERMS set based design, set based thinking, model based systems engineering, concurrent engineering, defense acquisition

Implementation of a participatory management model: analysis from a political perspective.

Science.gov (United States)

Bernardes, Andrea; G Cummings, Greta; Gabriel, Carmen Silvia; Martinez Évora, Yolanda Dora; Gomes Maziero, Vanessa; Coleman-Miller, Glenda

2015-10-01

To analyse experiences of managers and nursing staff in the implementation of participatory management, specifically processes of decision-making, communication and power in a Canadian hospital. Implementing a Participatory Management Model involves change because it is focused on the needs of patients and encourages decentralisation of power and shared decisions. The study design is qualitative using observational sessions and content analysis for data analysis. We used Bolman and Deal's four-frame theoretical framework to interpret our findings. Participatory management led to advances in care, because it allowed for more dialogue and shared decision making. However, the biggest challenge has been that all major changes are still being decided centrally by the provincial executive board. Managers and directors are facing difficulties related to this change process, such as the resistance to change by some employees and limited input to decision-making affecting their areas of responsibility; however, they and their teams are working to utilise the values and principles underlying participatory management in their daily work practices. Innovative management models encourage accountability, increased motivation and satisfaction of nursing staff, and improve the quality of care. © 2014 John Wiley & Sons Ltd.

Controller design and implementation of a three-phase Active Front End using SiC based MOSFETs

DEFF Research Database (Denmark)

Haase, Frerk; Kouchaki, Alireza; Nymand, Morten

2015-01-01

The design and implementation of a three phase Active Front End for power factor correction purposes using fast switching SiC based MOSFETs is presented. Possible applications are within the drives- and renewable energy sector. The controller is designed and implemented in the synchronous rotating...

DIANA Code: Design and implementation of an analytic core calculus code by two group, two zone diffusion

International Nuclear Information System (INIS)

Mochi, Ignacio

2005-01-01

The principal parameters of nuclear reactors are determined in the conceptual design stage.For that purpose, it is necessary to have flexible calculation tools that represent the principal dependencies of such parameters.This capability is of critical importance in the design of innovative nuclear reactors.In order to have a proper tool that could assist the conceptual design of innovative nuclear reactors, we developed and implemented a neutronic core calculus code: DIANA (Diffusion Integral Analytic Neutron Analysis).To calculate the required parameters, this code generates its own cross sections using an analytic two group, two zones diffusion scheme based only on a minimal set of data (i.e. 2200 m/s and fission averaged microscopic cross sections, Wescott factors and Effective Resonance Integrals).Both to calculate cross sections and core parameters, DIANA takes into account heterogeneity effects that are included when it evaluates each zone.Among them lays the disadvantage factor of each energy group.DIANA was totally implemented through Object Oriented Programming using C++ language. This eases source code understanding and would allow a quick expansion of its capabilities if needed.The final product is a versatile and easy-to-use code that allows core calculations with a minimal amount of data.It also contains the required tools needed to perform many variational calculations such as the parameterisation of effective multiplication factors for different radii of the core.The diffusion scheme s simplicity allows an easy following of the involved phenomena, making DIANA the most suitable tool to design reactors whose physics lays beyond the parameters of present reactors.All this reasons make DIANA a good candidate for future innovative reactor analysis

Design and Implementation of Convolutional Encoder and Viterbi Decoder Using FPGA.

Directory of Open Access Journals (Sweden)

Riham Ali Zbaid

2018-01-01

Full Text Available Keeping  the  fineness of data is the most significant thing in communication.There are many factors that affect the accuracy of the data when it is transmitted over the communication channel such as noise etc. to overcome these effects are encoding channels encryption.In this paper is used for one type of channel coding is convolutional codes. Convolution encoding is a Forward Error Correction (FEC method used in incessant one-way and real time communication links .It can offer a great development in the error bit rates so that small, low energy, and devices cheap transmission when used in applications such as satellites. In this paper highlight the design, simulation and implementation of convolution encoder and Viterbi decoder by using MATLAB- program (2011. SIMULINK HDL coder is used to convert MATLAB-SIMULINK models to VHDL using plates Altera Cyclone II code DE2-70. Simulation and evaluation of the implementation of the results coincided with the results of the design show the coinciding with the designed results.

Design and implementation of new control room system in Damavand tokamak

Science.gov (United States)

Rasouli, H.; Zamanian, H.; Gheidi, M.; Kheiri-Fard, M.; Kouhi, A.

2017-07-01

The aim of this paper is design and implementation of an up-to-date control room. The previous control room had a lot of constraints and it was not apposite to the sophisticated diagnostic systems as well as to the modern control and multivariable systems. Although it provided the best output for the considered experiments and implementing offline algorithms among all similar plants, it needed to be developed to provide more capability for complex algorithm mechanisms and this work introduces our efforts in this area. Accordingly, four leading systems were designed and implemented, including real-time control system, online Data Acquisition System (DAS), offline DAS, monitoring and data transmission system. In the control system, three real-time control modules were established based on Digital Signal Processor (DSP). Thanks to them, implementation of the classic and linear and nonlinear intelligent controllers was possible to control the plasma position and its elongation. Also, online DAS was constructed in two modules. Using them, voltages and currents of charge for the capacitor banks and pressure of different parts in vacuum vessel were measured and monitored. Likewise, by real-time processing of the online data, the safety protocol of plant performance was accomplished. In addition, the offline DAS was organized in 13 modules based on Field Programmable Gate Array (FPGA). This system can be used for gathering all diagnostic, control, and performance data in 156 channels. Data transmission system and storing mechanism in the server was provided by data transmitting network and MDSplus standard protocol. Moreover, monitoring software was designed so that it could display the required plots for physical analyses. Taking everything into account, this new platform can improve the quality and quantity of research activities in plasma physics for Damavand tokamak.

Multidimensional (OLAP) Analysis for Designing Dynamic Learning Strategy

Science.gov (United States)

Rozeva, A.; Deliyska, B.

2010-10-01

Learning strategy in an intelligent learning system is generally elaborated on the basis of assessment of the following factors: learner's time for reaction, content of the learning object, amount of learning material in a learning object, learning object specification, e-learning medium and performance control. Current work proposes architecture for dynamic learning strategy design by implementing multidimensional analysis model of learning factors. The analysis model concerns on-line analytical processing (OLAP) of learner's data structured as multidimensional cube. Main components of the architecture are analysis agent for performing the OLAP operations on learner data cube, adaptation generator and knowledge selection agent for performing adaptive navigation in the learning object repository. The output of the analysis agent is involved in dynamic elaboration of learning strategy that fits best to learners profile and behavior. As a result an adaptive learning path for individual learner and for learner groups is generated.

Design and implementation of ticket price forecasting system

Science.gov (United States)

Li, Yuling; Li, Zhichao

2018-05-01

With the advent of the aviation travel industry, a large number of data mining technologies have been developed to increase profits for airlines in the past two decades. The implementation of the digital optimization strategy leads to price discrimination, for example, similar seats on the same flight are purchased at different prices, depending on the time of purchase, the supplier, and so on. Price fluctuations make the prediction of ticket prices have application value. In this paper, a combination of ARMA algorithm and random forest algorithm is proposed to predict the price of air ticket. The experimental results show that the model is more reliable by comparing the forecasting results with the actual results of each price model. The model is helpful for passengers to buy tickets and to save money. Based on the proposed model, using Python language and SQL Server database, we design and implement the ticket price forecasting system.

DAKOTA : a multilevel parallel object-oriented framework for design optimization, parameter estimation, uncertainty quantification, and sensitivity analysis.

Energy Technology Data Exchange (ETDEWEB)

Eldred, Michael Scott; Vigil, Dena M.; Dalbey, Keith R.; Bohnhoff, William J.; Adams, Brian M.; Swiler, Laura Painton; Lefantzi, Sophia (Sandia National Laboratories, Livermore, CA); Hough, Patricia Diane (Sandia National Laboratories, Livermore, CA); Eddy, John P.

2011-12-01

The DAKOTA (Design Analysis Kit for Optimization and Terascale Applications) toolkit provides a flexible and extensible interface between simulation codes and iterative analysis methods. DAKOTA contains algorithms for optimization with gradient and nongradient-based methods; uncertainty quantification with sampling, reliability, and stochastic expansion methods; parameter estimation with nonlinear least squares methods; and sensitivity/variance analysis with design of experiments and parameter study methods. These capabilities may be used on their own or as components within advanced strategies such as surrogate-based optimization, mixed integer nonlinear programming, or optimization under uncertainty. By employing object-oriented design to implement abstractions of the key components required for iterative systems analyses, the DAKOTA toolkit provides a flexible and extensible problem-solving environment for design and performance analysis of computational models on high performance computers. This report serves as a theoretical manual for selected algorithms implemented within the DAKOTA software. It is not intended as a comprehensive theoretical treatment, since a number of existing texts cover general optimization theory, statistical analysis, and other introductory topics. Rather, this manual is intended to summarize a set of DAKOTA-related research publications in the areas of surrogate-based optimization, uncertainty quantification, and optimization under uncertainty that provide the foundation for many of DAKOTA's iterative analysis capabilities.

SustainPro - A tool for systematic process analysis, generation and evaluation of sustainable design alternatives

DEFF Research Database (Denmark)

Carvalho, Ana; Matos, Henrique A.; Gani, Rafiqul

2013-01-01

the user through the necessary steps according to work-flow of the implemented methodology. At the end the design alternatives, are evaluated using environmental impact assessment tools and safety indices. The extended features of the methodology incorporate Life Cycle Assessment analysis and economic....... The software tool is based on the implementation of an extended systematic methodology for sustainable process design (Carvalho et al. 2008 and Carvalho et al. 2009). Using process information/data such as the process flowsheet, the associated mass / energy balance data and the cost data, SustainPro guides...... analysis. The application and the main features of SustainPro are illustrated through a case study of ß-Galactosidase production....

Coupled Physics Environment (CouPE) library - Design, Implementation, and Release

Energy Technology Data Exchange (ETDEWEB)

Mahadevan, Vijay S. [Argonne National Lab. (ANL), Argonne, IL (United States)

2014-09-30

Over several years, high fidelity, validated mono-­physics solvers with proven scalability on peta-­scale architectures have been developed independently. Based on a unified component-­based architecture, these existing codes can be coupled with a unified mesh-­data backplane and a flexible coupling-­strategy-­based driver suite to produce a viable tool for analysts. In this report, we present details on the design decisions and developments on CouPE, an acronym that stands for Coupled Physics Environment that orchestrates a coupled physics solver through the interfaces exposed by MOAB array-­based unstructured mesh, both of which are part of SIGMA (Scalable Interfaces for Geometry and Mesh-­Based Applications) toolkit. The SIGMA toolkit contains libraries that enable scalable geometry and unstructured mesh creation and handling in a memory and computationally efficient implementation. The CouPE version being prepared for a full open-­source release along with updated documentation will contain several useful examples that will enable users to start developing their applications natively using the native MOAB mesh and couple their models to existing physics applications to analyze and solve real world problems of interest. An integrated multi-­physics simulation capability for the design and analysis of current and future nuclear reactor models is also being investigated as part of the NEAMS RPL, to tightly couple neutron transport, thermal-­hydraulics and structural mechanics physics under the SHARP framework. This report summarizes the efforts that have been invested in CouPE to bring together several existing physics applications namely PROTEUS (neutron transport code), Nek5000 (computational fluid-dynamics code) and Diablo (structural mechanics code). The goal of the SHARP framework is to perform fully resolved coupled physics analysis of a reactor on heterogeneous geometry, in order to reduce the overall numerical uncertainty while leveraging

Design and analysis of linear oscillatory single-phase permanent magnet generator for free-piston stirling engine systems

Science.gov (United States)

Kim, Jeong-Man; Choi, Jang-Young; Lee, Kyu-Seok; Lee, Sung-Ho

2017-05-01

This study focuses on the design and analysis of a linear oscillatory single-phase permanent magnet generator for free-piston stirling engine (FPSE) systems. In order to implement the design of linear oscillatory generator (LOG) for suitable FPSEs, we conducted electromagnetic analysis of LOGs with varying design parameters. Then, detent force analysis was conducted using assisted PM. Using the assisted PM gave us the advantage of using mechanical strength by detent force. To improve the efficiency, we conducted characteristic analysis of eddy-current loss with respect to the PM segment. Finally, the experimental result was analyzed to confirm the prediction of the FEA.

Design and Analysis of Subscale and Full-Scale Buckling-Critical Cylinders for Launch Vehicle Technology Development

Science.gov (United States)

Hilburger, Mark W.; Lovejoy, Andrew E.; Thornburgh, Robert P.; Rankin, Charles

2012-01-01

NASA s Shell Buckling Knockdown Factor (SBKF) project has the goal of developing new analysis-based shell buckling design factors (knockdown factors) and design and analysis technologies for launch vehicle structures. Preliminary design studies indicate that implementation of these new knockdown factors can enable significant reductions in mass and mass-growth in these vehicles. However, in order to validate any new analysis-based design data or methods, a series of carefully designed and executed structural tests are required at both the subscale and full-scale levels. This paper describes the design and analysis of three different orthogrid-stiffeNed metallic cylindrical-shell test articles. Two of the test articles are 8-ft-diameter, 6-ft-long test articles, and one test article is a 27.5-ft-diameter, 20-ft-long Space Shuttle External Tank-derived test article.

Design analysis and microprocessor based control of a nuclear reactor

International Nuclear Information System (INIS)

Sabbakh, N.J.

1988-01-01

The object of this thesis is to design and test a microprocessor based controller, to a simulated nuclear reactor system. The mathematical model that describes the dynamics of a typical nuclear reactor of one group of delayed neutrons approximations with temperature feedback was chosen. A digital computer program has been developed for the design and analysis of a simulated model based on the concept of state-variable feedback in order to meet a desired system response with maximum overshoot of 3.4% and setting time of 4 sec. The state variable feedback coefficients are designed for the continuous system, then an approximation is used to obtain in the state variable feedback vector for the discrete system. System control was implemented utilizing Direct Digital Control (DDC) of a nuclear reactor simulated model through a control algorithm that was performed by means of a microprocessor based system. The controller performance was satisfactorily tested by exciting the reactor system with a transient reactivity disturbance and by a step change in power demand. Direct digital control, when implemented on a microprocessor adds versatility, flexibility in system design with the added advantage of possible use of optimal control algorithms. 6 tabs.; 30 figs.; 46 refs.; 6 apps

Coal conversion processes and analysis methodologies for synthetic fuels production. [technology assessment and economic analysis of reactor design for coal gasification

Science.gov (United States)

1979-01-01

Information to identify viable coal gasification and utilization technologies is presented. Analysis capabilities required to support design and implementation of coal based synthetic fuels complexes are identified. The potential market in the Southeast United States for coal based synthetic fuels is investigated. A requirements analysis to identify the types of modeling and analysis capabilities required to conduct and monitor coal gasification project designs is discussed. Models and methodologies to satisfy these requirements are identified and evaluated, and recommendations are developed. Requirements for development of technology and data needed to improve gasification feasibility and economies are examined.

Integrated care reform in urban China: a qualitative study on design, supporting environment and implementation.

Science.gov (United States)

Qian, Yi; Hou, Zhiyuan; Wang, Wei; Zhang, Donglan; Yan, Fei

2017-10-25

Initiatives on integrated care between hospitals and community health centers (CHCs) have been introduced to transform the current fragmented health care delivery system into an integrated system in China. Up to date no research has analyzed in-depth the experiences of these initiatives based on perspectives from various stakeholders. This study analyzed the integrated care pilot in Hangzhou City by investigating stakeholders' perspectives on its design features and supporting environment, their acceptability of this pilot, and further identifying the enabling and constraining factors that may influence the implementation of the integrated care reform. The qualitative study was carried out based on in-depth interviews and focus group discussions with 50 key informants who were involved in the policy-making process and implementation. Relevant policy documents were also collected for analysis. The pilot in Hangzhou was established as a CHC-led delivery system based on cooperation agreement between CHCs and hospitals to deliver primary and specialty care together for patients with chronic diseases. An innovative learning-from-practice mentorship system between specialists and general practitioners was also introduced to solve the poor capacity of general practitioners. The design of the pilot, its governance and organizational structure and human resources were enabling factors, which facilitated the integrated care reform. However, the main constraining factors were a lack of an integrated payment mechanism from health insurance and a lack of tailored information system to ensure its sustainability. The integrated care pilot in Hangzhou enabled CHCs to play as gate-keeper and care coordinator for the full continuum of services across the health care providers. The government put integrated care a priority, and constructed an efficient design, governance and organizational structure to enable its implementation. Health insurance should play a proactive role, and

The Implementation Analysis of the Educational Portal with a Focus on Its Monetization

OpenAIRE

CHUCHLOVÁ, Martina

2015-01-01

The subject of the diploma thesis titled, "The Implementation Analysis of the Educational Portal with a Focus on Its Monetization" is the creation of a strategy that could be used for a new educational portal and subsequently its monetization. Primarily, the portal will be designed for university students. The theoretical part is focused on basic terms associated with issues of portals, web content monetization and operational expenses for running a website. In the practical part, there is a ...

Design, Modelling and Analysis of a Workflow Reconfiguration

DEFF Research Database (Denmark)

Mazzara, Manuel; Abouzaid, Faisal; Dragoni, Nicola

2011-01-01

This paper describes a case study involving the reconfiguration of an office workflow. We state the requirements on a system implementing the workflow and its reconfiguration, and describe the system’s design in BPMN. We then use an asynchronous pi-calculus and Web.1 to model the design and to ve......This paper describes a case study involving the reconfiguration of an office workflow. We state the requirements on a system implementing the workflow and its reconfiguration, and describe the system’s design in BPMN. We then use an asynchronous pi-calculus and Web.1 to model the design...

Semianalytic Design Sensitivity Analysis of Nonlinear Structures With a Commercial Finite Element Package

International Nuclear Information System (INIS)

Lee, Tae Hee; Yoo, Jung Hun; Choi, Hyeong Cheol

2002-01-01

A finite element package is often used as a daily design tool for engineering designers in order to analyze and improve the design. The finite element analysis can provide the responses of a system for given design variables. Although finite element analysis can quite well provide the structural behaviors for given design variables, it cannot provide enough information to improve the design such as design sensitivity coefficients. Design sensitivity analysis is an essential step to predict the change in responses due to a change in design variables and to optimize a system with the aid of the gradient-based optimization techniques. To develop a numerical method of design sensitivity analysis, analytical derivatives that are based on analytical differentiation of the continuous or discrete finite element equations are effective but analytical derivatives are difficult because of the lack of internal information of the commercial finite element package such as shape functions. Therefore, design sensitivity analysis outside of the finite element package is necessary for practical application in an industrial setting. In this paper, the semi-analytic method for design sensitivity analysis is used for the development of the design sensitivity module outside of a commercial finite element package of ANSYS. The direct differentiation method is employed to compute the design derivatives of the response and the pseudo-load for design sensitivity analysis is effectively evaluated by using the design variation of the related internal nodal forces. Especially, we suggest an effective method for stress and nonlinear design sensitivity analyses that is independent of the commercial finite element package is also discussed. Numerical examples are illustrated to show the accuracy and efficiency of the developed method and to provide insights for implementation of the suggested method into other commercial finite element packages

Three axis electronic flight motion simulator real time control system design and implementation.

Science.gov (United States)

Gao, Zhiyuan; Miao, Zhonghua; Wang, Xuyong; Wang, Xiaohua

2014-12-01

A three axis electronic flight motion simulator is reported in this paper including the modelling, the controller design as well as the hardware implementation. This flight motion simulator could be used for inertial navigation test and high precision inertial navigation system with good dynamic and static performances. A real time control system is designed, several control system implementation problems were solved including time unification with parallel port interrupt, high speed finding-zero method of rotary inductosyn, zero-crossing management with continuous rotary, etc. Tests were carried out to show the effectiveness of the proposed real time control system.

Three axis electronic flight motion simulator real time control system design and implementation

Energy Technology Data Exchange (ETDEWEB)

Gao, Zhiyuan; Miao, Zhonghua, E-mail: zhonghua-miao@163.com; Wang, Xiaohua [School of Mechatronic Engineering and Automation, Shanghai University, Shanghai, 200072 (China); Wang, Xuyong [School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China)

2014-12-15

A three axis electronic flight motion simulator is reported in this paper including the modelling, the controller design as well as the hardware implementation. This flight motion simulator could be used for inertial navigation test and high precision inertial navigation system with good dynamic and static performances. A real time control system is designed, several control system implementation problems were solved including time unification with parallel port interrupt, high speed finding-zero method of rotary inductosyn, zero-crossing management with continuous rotary, etc. Tests were carried out to show the effectiveness of the proposed real time control system.

VLSI Design with Alliance Free CAD Tools: an Implementation Example

Directory of Open Access Journals (Sweden)

Chávez-Bracamontes Ramón

2015-07-01

Full Text Available This paper presents the methodology used for a digital integrated circuit design that implements the communication protocol known as Serial Peripheral Interface, using the Alliance CAD System. The aim of this paper is to show how the work of VLSI design can be done by graduate and undergraduate students with minimal resources and experience. The physical design was sent to be fabricated using the CMOS AMI C5 process that features 0.5 micrometer in transistor size, sponsored by the MOSIS Educational Program. Tests were made on a platform that transfers data from inertial sensor measurements to the designed SPI chip, which in turn sends the data back on a parallel bus to a common microcontroller. The results show the efficiency of the employed methodology in VLSI design, as well as the feasibility of ICs manufacturing from school projects that have insufficient or no source of funding

Evaluating the implementation and impacts of middle grades inquiry-based engineering design modules

Science.gov (United States)

Harlan, Jessica M.

This dissertation uses a format where I present and discuss three articles that were written in conjunction with my work on a research and evaluation team. The articles are based on a multi-year project researching and evaluating the design, development, and implementation of a middle grades integrated Science, Technology, Engineering, and Mathematics (STEM) program. Each of the articles demonstrates the complexity in researching and evaluating curricular development in multifaceted, rapidly changing environments. While the focus of each article differs, they all examine research and evaluation in the context of the design and development of middle grades engineering-design modules. The selected articles address challenges associated with assessing program objectives and evaluating program quality in complex education programs.The first article, presented in Chapter 2, provides an overview of the nature of the EYE program and examines the extent to which participation in the EYE program resulted in the achievement of program objectives. There is evidence that EYE Module participation has a positive impact on participating students as well as teachers. This study also revealed challenges associated with determining the impact of program participation simultaneously with program revisions and assessment development. The second article, presented in Chapter 3, examined the evaluation of fidelity of implementation of inquiry-oriented educational programs. This article was intended to examine one way of triangulating information to determine fidelity while considering variation in implementation consistent with program theories of learning. When applying this model to implementation of the EYE program, we found many teachers were implementing the modules with low to moderate fidelity, especially math teachers. The third article, presented in Chapter 4, examined the factor structure of an occupational values scale intended to measure student interest in STEM careers

Computer-Aided Modelling of Short-Path Evaporation for Chemical Product Purification, Analysis and Design

DEFF Research Database (Denmark)

Sales-Cruz, Alfonso Mauricio; Gani, Rafiqul

2006-01-01

method, suitable for separation and purification of thermally unstable materials whose design and analysis can be efficiently performed through reliable model-based techniques. This paper presents a generalized model for short-path evaporation and highlights its development, implementation and solution...

Design-for-analysis or the unintended role of analysis in the design of piping systems

International Nuclear Information System (INIS)

Antaki, G.A.

1991-01-01

The paper discusses the evolution of piping design in the nuclear industry with its increasing reliance on dynamic analysis. While it is well recognized that the practice has evolved from ''design-by- rule '' to ''design-by-analysis,'' examples are provided of cases where the choice of analysis technique has determined the hardware configuration, which could be called ''design-for-analysis.'' The paper presents practical solutions to some of these cases and summarizes the important recent industry and regulatory developments which, if successful, will reverse the trend towards ''design-for-analysis.'' 14 refs

Some Practical Issues in the Design and Implementation of Group Communication Services

National Research Council Canada - National Science Library

Mishra, Shivakant

2000-01-01

The main objective of the proposed research was to investigate four important practical issues in the understanding, design, and implementation of group communication services. These issues were (1) Performance...

Strategic implementation of design for environment at Embraer

DEFF Research Database (Denmark)

Pigosso, Daniela Cristina Antelmi; Grandi, Carlos M.; Rozenfeld, Henrique

2013-01-01

Design for Environment (or ecodesign) has become increasingly important in the aircraft industry. Embraer, one of the world’s leading aircraft manufacturers, is committed to improve the environmental performance of the developed aircrafts. The roadmap for the strategic implementation of Df......E at Embraer, developed based on the application of the Ecodesign Maturity Model (EcoM2), is presented and further discussed in this paper. The paper describes the main projects and activities carried out at the company so to develop robust processes for the development of products with a better environmental...

Design and implementation of a wireless instrument adapter

DEFF Research Database (Denmark)

Laino, Kaori V.; Saathoff, Thore; Savarimuthu, Thiusius R.

2018-01-01

The evaluation of new methods for control and manipulation in minimally invasive robotic surgery requires a realistic setup. To decouple the evaluation of methods from overall clinical systems, we propose an instrument adapter for the S line EndoWrist\\c{opyright} instruments of the da Vinci...... surgical system. The adapter is small and lightweight and can be mounted to any robot to mimic motion. We describe its design and implementation, as well as a setup to calibrate instruments to study precise motion control. Our results indicate that each instrument requires individual calibration...

Theoretical analysis and real time implementation of a classical controller with intelligent properties

Directory of Open Access Journals (Sweden)

Essam Hendawi

2018-05-01

Full Text Available This paper presents theoretical analysis and experimental implementation of a classical controller with intelligent properties. The controller has constant parameters, but it performs as an intelligent controller. The controller design mimics the fuzzy logic controller in a classical form and combines the advantages of classical controllers and properties of intelligent controllers. The designed controller parameters force the controlled variable to behave such as a first order system with a desired time constant. DC motor practical system is used to demonstrate the effectiveness of the presented controller. Root locus and frequency response using Bode diagram are used to help the design of the controller parameters. Simulation and experimental results verify the high performance of the presented controller. Keywords: Classical controller, DC motor, Root locus, Frequency response, Arduino microcontroller

Advancing perspectives of sustainability and large-scale implementation of design teams in Ghana's polytechnics: Issues and opportunities

NARCIS (Netherlands)

Bakah, M.A.B.; Voogt, Joke; Pieters, Julius Marie

2012-01-01

Polytechnic staff perspectives are sought on the sustainability and large-scale implementation of design teams (DT), as a means for collaborative curriculum design and teacher professional development in Ghana's polytechnics, months after implementation. Data indicates that teachers still

Functional design and implementation proposal of a tool to support collaborative knwoledge building

Directory of Open Access Journals (Sweden)

Iolanda Garcia Gonzalez

2013-02-01

Full Text Available 0 0 1 147 810 USAL 6 1 956 14.0 Normal 0 21 false false false ES JA X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Tabla normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:Calibri; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-ansi-language:ES; mso-fareast-language:EN-US;} This article describes the process of conceptualization and functional design of an electronic forum, which aims to facilitate learning processes based on communication, but also on collaboration and social knowledge building, and their monitoring and evaluation. The experience is based on an innovation project involving the design, development and pilot implementation of an asynchronous communication tool, in the context of the Open University of Catalonia (UOC virtual campus. The design of the tool is based on the analysis of different reference models regarding the use of technology to support collaborative learning and social knowledge building processes. In parallel, and after analyzing some models for the study of collaborative knowledge building processes in virtual environments, the article presents a proposal for the analysis and assessment of such processes mediated by asynchronous communication tools similar to the one designed.

Design And Implementation Of Radio Resources Controller Of WCDMA

International Nuclear Information System (INIS)

Hafez, A.M.A.

2012-01-01

Recently, wireless communications and especially the mobile networks are employed in nuclear applications including, but not limited to, Nuclear Material Integrity [1], Radiation Monitoring Networks [2, 3] and Nuclear Power Plants [4]. The thesis introduces an overview about one of the third generation (3G) mobile networks, known as Universal Mobile Telecommunications System (UMTS) networks, which consists of Universal Terrestrial Radio Access Network (UTRAN) and the Core Network (CN). The UTRAN has many interfaces, but the thesis focuses on the Uu interface which is between the User Equipment (UE) and the UTRAN. That interface is based on Wideband Code Division Multiple Accessing (WCDMA) system. The protocol architecture of UMTS is composed of two planes; the control plane and the user plane. Again, the thesis is concerned on the control plane which has the Radio Resources Control (RRC) protocol to manage the control signal at the Uu interface between the UE and the Radio Network Controller. The main goal of the thesis is to design, implement and test the building blocks of Radio Resources Controller of the WCDMA system. Also, the thesis presents one of nuclear applications that is based on WCDMA. This application includes design, implementation and simulation of Radiation Monitoring network as a pilot prototype model.

Training of Teachers and Teaching Services Specialists for the Design and Implementation of the "School Psychology Master Program

Directory of Open Access Journals (Sweden)

Maksimova L.A.

2015-11-01

Full Text Available The article presents the experience of organizing the training courses for teachers and teaching services specialists for design and implementation of the basic professional educational pedagogical master program in a psycho-pedagogical training direction (educational psychologist with enhanced internship for students in a context of networking. The authors submit a modular design of training program. The first module includes methodological bases of the design and implementation of the basic professional educational master program. The second module includes legal coverage of the design and implementation of the basic professional educational master program. The third module consists of design and implementation of the basic professional educational master program in a psycho-pedagogical training direction (educational psychologist. The program involves a variety of active and interactive educational technology, providing the development of professional activities: remote technology, expert seminars, design stations, panels and plenary discussions, business games, round-table discussions.

Optimizing Blocking and Nonblocking Reduction Operations for Multicore Systems: Hierarchical Design and Implementation

Energy Technology Data Exchange (ETDEWEB)

Gorentla Venkata, Manjunath [ORNL; Shamis, Pavel [ORNL; Graham, Richard L [ORNL; Ladd, Joshua S [ORNL; Sampath, Rahul S [ORNL

2013-01-01

Many scientific simulations, using the Message Passing Interface (MPI) programming model, are sensitive to the performance and scalability of reduction collective operations such as MPI Allreduce and MPI Reduce. These operations are the most widely used abstractions to perform mathematical operations over all processes that are part of the simulation. In this work, we propose a hierarchical design to implement the reduction operations on multicore systems. This design aims to improve the efficiency of reductions by 1) tailoring the algorithms and customizing the implementations for various communication mechanisms in the system 2) providing the ability to configure the depth of hierarchy to match the system architecture, and 3) providing the ability to independently progress each of this hierarchy. Using this design, we implement MPI Allreduce and MPI Reduce operations (and its nonblocking variants MPI Iallreduce and MPI Ireduce) for all message sizes, and evaluate on multiple architectures including InfiniBand and Cray XT5. We leverage and enhance our existing infrastructure, Cheetah, which is a framework for implementing hierarchical collective operations to implement these reductions. The experimental results show that the Cheetah reduction operations outperform the production-grade MPI implementations such as Open MPI default, Cray MPI, and MVAPICH2, demonstrating its efficiency, flexibility and portability. On Infini- Band systems, with a microbenchmark, a 512-process Cheetah nonblocking Allreduce and Reduce achieves a speedup of 23x and 10x, respectively, compared to the default Open MPI reductions. The blocking variants of the reduction operations also show similar performance benefits. A 512-process nonblocking Cheetah Allreduce achieves a speedup of 3x, compared to the default MVAPICH2 Allreduce implementation. On a Cray XT5 system, a 6144-process Cheetah Allreduce outperforms the Cray MPI by 145%. The evaluation with an application kernel, Conjugate

A Policy Analysis of the implementation of a Reproductive Health Vouchers Program in Kenya

Directory of Open Access Journals (Sweden)

Abuya Timothy

2012-07-01

Full Text Available Abstract Background Innovative financing strategies such as those that integrate supply and demand elements like the output-based approach (OBA have been implemented to reduce financial barriers to maternal health services. The Kenyan government with support from the German Development Bank (KfW implemented an OBA voucher program to subsidize priority reproductive health services. Little evidence exists on the experience of implementing such programs in different settings. We describe the implementation process of the Kenyan OBA program and draw implications for scale up. Methods Policy analysis using document review and qualitative data from 10 in-depth interviews with facility in-charges and 18 with service providers from the contracted facilities, local administration, health and field managers in Kitui, Kiambu and Kisumu districts as well as Korogocho and Viwandani slums in Nairobi. Results The OBA implementation process was designed in phases providing an opportunity for learning and adapting the lessons to local settings; the design consisted of five components: a defined benefit package, contracting and quality assurance; marketing and distribution of vouchers and claims processing and reimbursement. Key implementation challenges included limited feedback to providers on the outcomes of quality assurance and accreditation and budgetary constraints that limited effective marketing leading to inadequate information to clients on the benefit package. Claims processing and reimbursement was sophisticated but required adherence to time consuming procedures and in some cases private providers complained of low reimbursement rates for services provided. Conclusions OBA voucher schemes can be implemented successfully in similar settings. For effective scale up, strong partnership will be required between the public and private entities. The government’s role is key and should include provision of adequate funding, stewardship and looking for

A policy analysis of the implementation of a Reproductive Health Vouchers Program in Kenya.

Science.gov (United States)

Abuya, Timothy; Njuki, Rebecca; Warren, Charlotte E; Okal, Jerry; Obare, Francis; Kanya, Lucy; Askew, Ian; Bellows, Ben

2012-07-23

Innovative financing strategies such as those that integrate supply and demand elements like the output-based approach (OBA) have been implemented to reduce financial barriers to maternal health services. The Kenyan government with support from the German Development Bank (KfW) implemented an OBA voucher program to subsidize priority reproductive health services. Little evidence exists on the experience of implementing such programs in different settings. We describe the implementation process of the Kenyan OBA program and draw implications for scale up. Policy analysis using document review and qualitative data from 10 in-depth interviews with facility in-charges and 18 with service providers from the contracted facilities, local administration, health and field managers in Kitui, Kiambu and Kisumu districts as well as Korogocho and Viwandani slums in Nairobi. The OBA implementation process was designed in phases providing an opportunity for learning and adapting the lessons to local settings; the design consisted of five components: a defined benefit package, contracting and quality assurance; marketing and distribution of vouchers and claims processing and reimbursement. Key implementation challenges included limited feedback to providers on the outcomes of quality assurance and accreditation and budgetary constraints that limited effective marketing leading to inadequate information to clients on the benefit package. Claims processing and reimbursement was sophisticated but required adherence to time consuming procedures and in some cases private providers complained of low reimbursement rates for services provided. OBA voucher schemes can be implemented successfully in similar settings. For effective scale up, strong partnership will be required between the public and private entities. The government's role is key and should include provision of adequate funding, stewardship and looking for opportunities to utilize existing platforms to scale up such

Visual Servoing Tracking Control of a Ball and Plate System: Design, Implementation and Experimental Validation

Directory of Open Access Journals (Sweden)

Ming-Tzu Ho

2013-07-01

Full Text Available This paper presents the design, implementation and validation of real-time visual servoing tracking control for a ball and plate system. The position of the ball is measured with a machine vision system. The image processing algorithms of the machine vision system are pipelined and implemented on a field programmable gate array (FPGA device to meet real-time constraints. A detailed dynamic model of the system is derived for the simulation study. By neglecting the high-order coupling terms, the ball and plate system model is simplified into two decoupled ball and beam systems, and an approximate input-output feedback linearization approach is then used to design the controller for trajectory tracking. The designed control law is implemented on a digital signal processor (DSP. The validity of the performance of the developed control system is investigated through simulation and experimental studies. Experimental results show that the designed system functions well with reasonable agreement with simulations.

Design and Implementation of a Consolidated Airfield at McMurdo, Antarctica

Science.gov (United States)

2014-09-01

Technical Documents in Hydrology No 83, IACS Contribution No 1. Paris : United Nations Educational, Scientific and Cultural Organization, International...d elivery I 1 Commissioning I EIFuels delivery system Design 9 Procurement I contracting I transportation I b Season 1 implementation - Brest cap

Designing and Implementing Weather Generators as Web Services

Directory of Open Access Journals (Sweden)

Rassarin Chinnachodteeranun

2016-12-01

Full Text Available Climate and weather realizations are essential inputs for simulating crop growth and yields to analyze the risks associated with future conditions. To simplify the procedure of generating weather realizations and make them available over the Internet, we implemented novel mechanisms for providing weather generators as web services, as well as a mechanism for sharing identical weather realizations given a climatological information. A web service for preparing long-term climate data was implemented based on an international standard, Sensor Observation Service (SOS. The weather generator services, which are the core components of the framework, analyze climatological data, and can take seasonal climate forecasts as inputs for generating weather realizations. The generated weather realizations are encoded in a standard format, which are ready for use to crop modeling. All outputs are generated in SOS standard, which broadens the extent of data sharing and interoperability with other sectoral applications, e.g., water resources management. These services facilitate the development of other applications requiring input weather realizations, as these can be obtained easily by just calling the service. The workload of analysts related to data preparation and handling of legacy weather generator programs can be reduced. The architectural design and implementation presented here can be used as a prototype for constructing further services on top of an interoperable sensor network system.

Teacher Professional Competency Analysis: Implementation Aspect of Continuous Professional Development (CPD

Directory of Open Access Journals (Sweden)

Annisa Vidya Safitri

2017-09-01

Full Text Available The purpose of this study was to identify the practice of teacher reflection as the basis for the implementation of Sustainable Professionalism (PKB program based on Permendiknas No. 16/2007 at SMKN 2 Kediri. This research is qualitative with phenomenology design. The informants of this research are principal, productive teacher of marketing, vice principal, teacher and marketing teacher. Technique of data collecting done by in-depth interview and documentation. The validity of the data using technique triangulation and source. Data analysis using Miles and Huberman interactive models, extension of observation, and referential adequacy. The results showed that the reflection was not used as the basis of CLA and the teachers did not implement the CLA planning. Elements of PKB activities have been in accordance with the guidelines of self-development and scientific publications. PKB activities have an impact on teacher groups that discuss research issues, more varied and contextual KBM, and administrative demands for teachers.

Design and implementation of fishery rescue data mart system

Science.gov (United States)

Pan, Jun; Huang, Haiguang; Liu, Yousong

A novel data mart based system for fishery rescue field was designed and implemented. The system runs ETL process to deal with original data from various databases and data warehouses, and then reorganized the data into the fishery rescue data mart. Next, online analytical processing (OLAP) are carried out and statistical reports are generated automatically. Particularly, quick configuration schemes are designed to configure query dimensions and OLAP data sets. The configuration file will be transformed into statistic interfaces automatically through a wizard-style process. The system provides various forms of reporting files, including crystal reports, flash graphical reports, and two-dimensional data grids. In addition, a wizard style interface was designed to guide users customizing inquiry processes, making it possible for nontechnical staffs to access customized reports. Characterized by quick configuration, safeness and flexibility, the system has been successfully applied in city fishery rescue department.

City of Hoboken Energy Surety Analysis: Preliminary Design Summary

Energy Technology Data Exchange (ETDEWEB)

Stamp, Jason Edwin [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Baca, Michael J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Munoz-Ramos, Karina [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Schenkman, Benjamin L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Military and Energy Systems Analysis Dept.; Eddy, John P. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Systems Readiness and Sustainment Technology Dept.; Smith, Mark A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Systems Readiness and Sustainment Technology Dept.; Guttromson, Ross [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Electric Power Systems Research Dept.; Henry, Jordan M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Critical Infrastructure Systems Dept.; Jensen, Richard Pearson [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States). Geomechanics Dept.

2014-09-01

In 2012, Hurricane Sandy devastated much of the U.S. northeast coastal areas. Among those hardest hit was the small community of Hoboken, New Jersey, located on the banks of the Hudson River across from Manhattan. This report describes a city-wide electrical infrastructure design that uses microgrids and other infrastructure to ensure the city retains functionality should such an event occur in the future. The designs ensure that up to 55 critical buildings will retain power during blackout or flooded conditions and include analysis for microgrid architectures, performance parameters, system control, renewable energy integration, and financial opportunities (while grid connected). The results presented here are not binding and are subject to change based on input from the Hoboken stakeholders, the integrator selected to manage and implement the microgrid, or other subject matter experts during the detailed (final) phase of the design effort.

Reflections on designing and implementing a task-based unit using gamebooks

OpenAIRE

Branden, KIRCHMEYER; Sarah FAHERTY\

2017-01-01

A small scale action-research project was designed to explore the effectiveness of using interactive narratives to facilitate L2 output in a communicative English class. A four-week unit of instruction was implemented across five classes comprised of non-English major students at a university in Japan. Using graded reader gamebooks from the Atama-ii series, activities were designed to simultaneously engage students in English reading while also promoting active discussion in English. Data was...

Analysis, Design and Implementation of an Embedded Realtime Sound Source Localization System Based on Beamforming Theory

Directory of Open Access Journals (Sweden)

Arko Djajadi

2009-12-01

Full Text Available This project is intended to analyze, design and implement a realtime sound source localization system by using a mobile robot as the media. The implementated system uses 2 microphones as the sensors, Arduino Duemilanove microcontroller system with ATMega328p as the microprocessor, two permanent magnet DC motors as the actuators for the mobile robot and a servo motor as the actuator to rotate the webcam directing to the location of the sound source, and a laptop/PC as the simulation and display media. In order to achieve the objective of finding the position of a specific sound source, beamforming theory is applied to the system. Once the location of the sound source is detected and determined, the choice is either the mobile robot will adjust its position according to the direction of the sound source or only webcam will rotate in the direction of the incoming sound simulating the use of this system in a video conference. The integrated system has been tested and the results show the system could localize in realtime a sound source placed randomly on a half circle area (0 - 1800 with a radius of 0.3m - 3m, assuming the system is the center point of the circle. Due to low ADC and processor speed, achievable best angular resolution is still limited to 25o.

Implementation of Grid-computing Framework for Simulation in Multi-scale Structural Analysis

Directory of Open Access Journals (Sweden)

Data Iranata

2010-05-01

Full Text Available A new grid-computing framework for simulation in multi-scale structural analysis is presented. Two levels of parallel processing will be involved in this framework: multiple local distributed computing environments connected by local network to form a grid-based cluster-to-cluster distributed computing environment. To successfully perform the simulation, a large-scale structural system task is decomposed into the simulations of a simplified global model and several detailed component models using various scales. These correlated multi-scale structural system tasks are distributed among clusters and connected together in a multi-level hierarchy and then coordinated over the internet. The software framework for supporting the multi-scale structural simulation approach is also presented. The program architecture design allows the integration of several multi-scale models as clients and servers under a single platform. To check its feasibility, a prototype software system has been designed and implemented to perform the proposed concept. The simulation results show that the software framework can increase the speedup performance of the structural analysis. Based on this result, the proposed grid-computing framework is suitable to perform the simulation of the multi-scale structural analysis.

Design and Simulation of MEMS Devices using Interval Analysis

International Nuclear Information System (INIS)

Shanmugavalli, M; Uma, G; Vasuki, B; Umapathy, M

2006-01-01

Modeling and simulation of MEMS devices are used to optimize the design, to improve the performance of the device, to reduce time to market, to minimize development time and cost by avoiding unnecessary design cycles and foundry runs. The major design objectives in any device design, is to meet the required functional parameters and the reliability of the device. The functional parameters depend on the geometry of the structure, material properties and process parameters. All model parameters act as input to optimize the functional parameters. The major difficulty the designer faces is the dimensions and properties used in the simulation of the MEMS devices can not be exactly followed during fabrication. In order to overcome this problem, the designer must test the device in simulation for bound of parameters involved in it. The paper demonstrates the use of interval methods to assess the electromechanical behaviour of micro electromechanical systems (MEMS) under the presence of manufacturing and process uncertainties. Interval method guides the design of pullin voltage analysis of fixed-fixed beam to achieve a robust and reliable design in a most efficient way. The methods are implemented numerically using Coventorware and analytically using Intlab

Design and implementation of robust controllers for a gait trainer.

Science.gov (United States)

Wang, F C; Yu, C H; Chou, T Y

2009-08-01

This paper applies robust algorithms to control an active gait trainer for children with walking disabilities. Compared with traditional rehabilitation procedures, in which two or three trainers are required to assist the patient, a motor-driven mechanism was constructed to improve the efficiency of the procedures. First, a six-bar mechanism was designed and constructed to mimic the trajectory of children's ankles in walking. Second, system identification techniques were applied to obtain system transfer functions at different operating points by experiments. Third, robust control algorithms were used to design Hinfinity robust controllers for the system. Finally, the designed controllers were implemented to verify experimentally the system performance. From the results, the proposed robust control strategies are shown to be effective.

Variation in Research Designs Used to Test the Effectiveness of Dissemination and Implementation Strategies: A Review

Directory of Open Access Journals (Sweden)

Stephanie Mazzucca

2018-02-01

Full Text Available BackgroundThe need for optimal study designs in dissemination and implementation (D&I research is increasingly recognized. Despite the wide range of study designs available for D&I research, we lack understanding of the types of designs and methodologies that are routinely used in the field. This review assesses the designs and methodologies in recently proposed D&I studies and provides resources to guide design decisions.MethodsWe reviewed 404 study protocols published in the journal Implementation Science from 2/2006 to 9/2017. Eligible studies tested the efficacy or effectiveness of D&I strategies (i.e., not effectiveness of the underlying clinical or public health intervention; had a comparison by group and/or time; and used ≥1 quantitative measure. Several design elements were extracted: design category (e.g., randomized; design type [e.g., cluster randomized controlled trial (RCT]; data type (e.g., quantitative; D&I theoretical framework; levels of treatment assignment, intervention, and measurement; and country in which the research was conducted. Each protocol was double-coded, and discrepancies were resolved through discussion.ResultsOf the 404 protocols reviewed, 212 (52% studies tested one or more implementation strategy across 208 manuscripts, therefore meeting inclusion criteria. Of the included studies, 77% utilized randomized designs, primarily cluster RCTs. The use of alternative designs (e.g., stepped wedge increased over time. Fewer studies were quasi-experimental (17% or observational (6%. Many study design categories (e.g., controlled pre–post, matched pair cluster design were represented by only one or two studies. Most articles proposed quantitative and qualitative methods (61%, with the remaining 39% proposing only quantitative. Half of protocols (52% reported using a theoretical framework to guide the study. The four most frequently reported frameworks were Consolidated Framework for Implementing Research and RE

Variation in Research Designs Used to Test the Effectiveness of Dissemination and Implementation Strategies: A Review.

Science.gov (United States)

Mazzucca, Stephanie; Tabak, Rachel G; Pilar, Meagan; Ramsey, Alex T; Baumann, Ana A; Kryzer, Emily; Lewis, Ericka M; Padek, Margaret; Powell, Byron J; Brownson, Ross C

2018-01-01

The need for optimal study designs in dissemination and implementation (D&I) research is increasingly recognized. Despite the wide range of study designs available for D&I research, we lack understanding of the types of designs and methodologies that are routinely used in the field. This review assesses the designs and methodologies in recently proposed D&I studies and provides resources to guide design decisions. We reviewed 404 study protocols published in the journal Implementation Science from 2/2006 to 9/2017. Eligible studies tested the efficacy or effectiveness of D&I strategies (i.e., not effectiveness of the underlying clinical or public health intervention); had a comparison by group and/or time; and used ≥1 quantitative measure. Several design elements were extracted: design category (e.g., randomized); design type [e.g., cluster randomized controlled trial (RCT)]; data type (e.g., quantitative); D&I theoretical framework; levels of treatment assignment, intervention, and measurement; and country in which the research was conducted. Each protocol was double-coded, and discrepancies were resolved through discussion. Of the 404 protocols reviewed, 212 (52%) studies tested one or more implementation strategy across 208 manuscripts, therefore meeting inclusion criteria. Of the included studies, 77% utilized randomized designs, primarily cluster RCTs. The use of alternative designs (e.g., stepped wedge) increased over time. Fewer studies were quasi-experimental (17%) or observational (6%). Many study design categories (e.g., controlled pre-post, matched pair cluster design) were represented by only one or two studies. Most articles proposed quantitative and qualitative methods (61%), with the remaining 39% proposing only quantitative. Half of protocols (52%) reported using a theoretical framework to guide the study. The four most frequently reported frameworks were Consolidated Framework for Implementing Research and RE-AIM ( n  = 16 each), followed by

The Hamlet design entry system: on the implementation of synchronous channels

NARCIS (Netherlands)

M.R. van Steen

1994-01-01

textabstractThe graphical Hamlet Application Design Language (ADL) has been developed to support the construction of parallel applications. The language is based on a notion of processes communicating by means of message-passing. One of the goals of ADL is that its implementation should allow

Design and Implementation of Company Tailored Automated Material Handling

DEFF Research Database (Denmark)

Langer, Gilad; Bilberg, Arne

1996-01-01

This article focuses on the problems of analysing automation of material handling systems in order to develop an efficient automated solution that is specifically tailored to the company. The research has resulted in development of new methods for evaluating factory automation from design...... to implementation. The goals of the research were to analyse and evaluate automation in order to obtain an advantageous combination of human and automated resources. The idea is to asses different solutions in a virtual environment, where experiments and analyses can be performed so that the company can justify...... for their application with computer aided information processing tools. The framework is named the "Automated Material Handling (AMH) Preference GuideLine". The research has been carried out in close co-operation with Danish and European industry, where implementations of automation can be referred to. It is our...

Design and implementation of a non-linear symphonic soundtrack of a video game

Science.gov (United States)

Sporka, Adam J.; Valta, Jan

2017-10-01

The music in the contemporary video games is often interactive. The music playback is based on transitions between pieces of available music material. These transitions happen in response to evolving gameplay. This paradigm is referred to as the adaptive music. Our challenge was to design, create, and implement the soundtrack of the upcoming video game Kingdom Come: Deliverance. Our soundtrack is a collection of compositions with symphonic orchestration. Per our design decision, our intention was to implement the adaptive music in a way which respected the nature of the orchestral film score. We created our own adaptive music middleware, called Sequence Music Engine, implementing a high-level music logic as well as the low-level playback infrastructure. Our system can handle hours of video game music, helps maintain the relevance of the music throughout the video game, and minimises the repetitiveness of the individual pieces.

Implementation of Traditional Malay Design Values in Contemporary Malay Houses

Directory of Open Access Journals (Sweden)

Elham Hosseini

2016-05-01

Full Text Available Traditional houses are the most essential architectural experience that is in harmony with the people's culture, beliefs, environment and lifestyles. The development of design values in contemporary architecture by tracking traditional design values in architecture paves the way for arguments concerning the implementation of authentic Malay traditional house design values in contemporary Malay houses. In addition, it is hypothesized that the Malay traditional houses theoretically provide a constructive innovative framework for the design performance of the contemporary Malay house. In this research, data was compiled through field observation and documentary review. The evidence revealed that Malay traditional houses convey a concrete message of richness encompassing architectural design values and theoretical propositions. The credibility of the results was improved and confirmed by a confluence of evidence via a confirmation process. The findings suggested that there is a rich source of subjective support, lending proof to the premise of the research investigation. The research has highlighted the significance of traditional architectural design values towards innovative design in the architecture of contemporary Malay houses as a workable pattern for use in the design of contemporary architecture.

Hash3: Proofs, Analysis and Implementation

DEFF Research Database (Denmark)

Gauravaram, Praveen

2009-01-01

This report outlines the talks presented at the winter school on Hash3: Proofs, Analysis, and Implementation, ECRYPT II Event on Hash Functions. In general, speakers may not write everything what they talk on the slides. So, this report also outlines such findings following the understanding of t...

Managing and Communicating Operational Workflow: Designing and Implementing an Electronic Outpatient Whiteboard.

Science.gov (United States)

Steitz, Bryan D; Weinberg, Stuart T; Danciu, Ioana; Unertl, Kim M

2016-01-01

Healthcare team members in emergency department contexts have used electronic whiteboard solutions to help manage operational workflow for many years. Ambulatory clinic settings have highly complex operational workflow, but are still limited in electronic assistance to communicate and coordinate work activities. To describe and discuss the design, implementation, use, and ongoing evolution of a coordination and collaboration tool supporting ambulatory clinic operational workflow at Vanderbilt University Medical Center (VUMC). The outpatient whiteboard tool was initially designed to support healthcare work related to an electronic chemotherapy order-entry application. After a highly successful initial implementation in an oncology context, a high demand emerged across the organization for the outpatient whiteboard implementation. Over the past 10 years, developers have followed an iterative user-centered design process to evolve the tool. The electronic outpatient whiteboard system supports 194 separate whiteboards and is accessed by over 2800 distinct users on a typical day. Clinics can configure their whiteboards to support unique workflow elements. Since initial release, features such as immunization clinical decision support have been integrated into the system, based on requests from end users. The success of the electronic outpatient whiteboard demonstrates the usefulness of an operational workflow tool within the ambulatory clinic setting. Operational workflow tools can play a significant role in supporting coordination, collaboration, and teamwork in ambulatory healthcare settings.

MODEL-ORIENTED METHOD OF DESIGN IMPLEMENTATION WHEN CREATING DIGITAL FILTERS

Directory of Open Access Journals (Sweden)

V. Levinskyi

2016-12-01

Full Text Available This article discusses the example of model-oriented method of design and development of digital low-pass filters (LPF for automatic control systems (ACS. Typically, high frequency noise and disturbance attenuation is carried out by analogue LPF. However, technical implementation of analogue filters higher than the second order arouse certain difficulties related with the need of precise passive components ratings selection (resistors, capacitors. If the noise and disturbances spectral composition is known, it is possible to build digital LPF with the Nyquist frequency greater than the maximum frequency in the noise spectrum. Such possibility has appeared because of cheap, energy-efficient, high-speed 32-bit microcontrollers market entry. They have analogue signals sampling rate of 30 kHz and above. The traditional approach using the “manual” method of filter parameters calculation, obtaining their recurrence expressions and further program implementation requires high qualification and a lot of time consumption from the developer. An alternative to this approach is the model-oriented method of design (MOMD in MatLab environment when in the one environment the design of digital LPF, verificaton of its performance as a part of the ACS, generation and compilation of program codes for selected microcontroller family take place. MOMD can also be used in the designs of bandpass and bandstop filters for adaptive control systems or systems of technical diagnostics. If during the commissioning or the operation of ACS there is a need in digital LPF parameters change then this operation can be performed within half an hour. MOMD technology allows to significantly reduce the time for developing a specific product without loss of quality in its design ‘cause of extensive possibilities of MatLab development environment.

Implementation Plan for Chemical Industry R&D Roadmap for Nanomaterials by Design

Energy Technology Data Exchange (ETDEWEB)

none,

2006-04-01

The purpose of this effort is to develop an implementation plan to realize the vision and goals identified in the Chemical Industry R&D Roadmap for Nanomaterials By Design: From Fundamentals to Function.

Design and analysis of linear oscillatory single-phase permanent magnet generator for free-piston stirling engine systems

Directory of Open Access Journals (Sweden)

Jeong-Man Kim

2017-05-01

Full Text Available This study focuses on the design and analysis of a linear oscillatory single-phase permanent magnet generator for free-piston stirling engine (FPSE systems. In order to implement the design of linear oscillatory generator (LOG for suitable FPSEs, we conducted electromagnetic analysis of LOGs with varying design parameters. Then, detent force analysis was conducted using assisted PM. Using the assisted PM gave us the advantage of using mechanical strength by detent force. To improve the efficiency, we conducted characteristic analysis of eddy-current loss with respect to the PM segment. Finally, the experimental result was analyzed to confirm the prediction of the FEA.

PC-based Multiple Information System Interface (PC/MISI) detailed design and implementation plan

Science.gov (United States)

Dominick, Wayne D. (Editor); Hall, Philip P.

1985-01-01

The design plan for the personal computer multiple information system interface (PC/MISI) project is discussed. The document is intended to be used as a blueprint for the implementation of the system. Each component is described in the detail necessary to allow programmers to implement the system. A description of the system data flow and system file structures is given.

Implementation of the SuperPave IDT Analysis Procedure

DEFF Research Database (Denmark)

Du, Guangli

Cracking is one of the most severe distress modes of asphalt pavements. Thus characterizing the fracture resistance properties of asphalt mixtures is the key issue for improving the performance related mixture design. The present master thesis project addresses the implementation of the theoretical...

Area overhead analysis of SEF: A design methodology for tolerating SEU

International Nuclear Information System (INIS)

Blaquiere, Y.; Savaria, Y.

1987-01-01

Soft-Error filtering (SEF) is a design methodology proposed recently for implementing machines tolerant to SEU. This paper deals mainly with the evaluation and the reduction of the area overhead brought by SEF. A new shift register filtering latch configuration is proposed. The use of this latch, optimized for minimum area, reduces the area overhead by a factor of 2.6, when compared with latches optimized for time performance. A detailed analysis of the area overhead with SEF implemented on two relatively complex machines produced the following results: a SEF version of the 6800 microprocessor would require an area overhead varying between 12% and 69% depending on the SEF latch used and, a SEF version of the RISCII microprocessor would result in a 38.8% area overhead. An analysis of the cost of implementing the Hamming error correcting code on a register array is presented and this cost is compared with that of implementing SEU tolerance directly with SEF. Finally, a hybrid approach is proposed where a large register array is protected by an error correcting code whereas the isolated latches are replaced by filtering latches. This hybrid approach reduces the area overhead to 18.8% for the RISCII architecture

Design and implementation of a generalized laboratory data model

Directory of Open Access Journals (Sweden)

Nhan Mike

2007-09-01

Full Text Available Abstract Background Investigators in the biological sciences continue to exploit laboratory automation methods and have dramatically increased the rates at which they can generate data. In many environments, the methods themselves also evolve in a rapid and fluid manner. These observations point to the importance of robust information management systems in the modern laboratory. Designing and implementing such systems is non-trivial and it appears that in many cases a database project ultimately proves unserviceable. Results We describe a general modeling framework for laboratory data and its implementation as an information management system. The model utilizes several abstraction techniques, focusing especially on the concepts of inheritance and meta-data. Traditional approaches commingle event-oriented data with regular entity data in ad hoc ways. Instead, we define distinct regular entity and event schemas, but fully integrate these via a standardized interface. The design allows straightforward definition of a "processing pipeline" as a sequence of events, obviating the need for separate workflow management systems. A layer above the event-oriented schema integrates events into a workflow by defining "processing directives", which act as automated project managers of items in the system. Directives can be added or modified in an almost trivial fashion, i.e., without the need for schema modification or re-certification of applications. Association between regular entities and events is managed via simple "many-to-many" relationships. We describe the programming interface, as well as techniques for handling input/output, process control, and state transitions. Conclusion The implementation described here has served as the Washington University Genome Sequencing Center's primary information system for several years. It handles all transactions underlying a throughput rate of about 9 million sequencing reactions of various kinds per month and

Design and Implementation of an IoT Access Point for Smart Home

Directory of Open Access Journals (Sweden)

Chih-Yung Chang

2015-12-01

Full Text Available Network communication and micro-electro-mechanical embedded technologies have attracted much attention in recent years. Through these technologies, the capabilities of sensing, identification, and communication can be embedded in various smart devices. These smart devices can automatically connect to the Internet and form an intelligent network called Internet of Things (IoT. However, these devices are embedded with different wireless communication interfaces such as Wi-Fi and ZigBee. This paper presents the design and implementation of an IoT access point that supports functionalities of coordination of various wireless transmission protocols. Based on the existing Wi-Fi access point, we have embedded a ZigBee module and implemented ZigBee and UPnP protocols into the designed IoT access point, which supports ZigBee communication capabilities over the Internet.

Design, implementation and stabilization of a Bipedal robot

Science.gov (United States)

Nath, Alok; Das, Goutam; Mallick, Anik; Chowdhury, Shovan

2017-12-01

In this paper, we have presented the mechanical design and fabrication of a Bipedal walking robot as well as control strategies to be implemented for walking and balance recovery. For this robot, we considered Six Degree of Freedom (D.O.P) in the lower body one at each hip, one at each knee and one at each ankle. Each degree of freedom is powered by a RC servo motor and this robot is controlled by Arduino Mega 2560 micro controller. By balancing center of mass (C.O.M) it walks in rhythmic way as like as human one.

Small-Signal Modeling, Stability Analysis and Design Optimization of Single-Phase Delay-Based PLLs

DEFF Research Database (Denmark)

Golestan, Saeed; Guerrero, Josep M.; Vidal, Ana

2016-01-01

Generally speaking, designing single-phase phaselocked loops (PLLs) is more complicated than three-phase ones, as their implementation often involves the generation of a fictitious orthogonal signal for the frame transformation. In recent years, many approaches to generate the orthogonal signal...... these issues and explore new methods to enhance their performance. The stability analysis, control design guidelines and performance comparison with the state-of-the-art PLLs are presented as well....

Design and Implementation of Control and Monitoring Systems Based on HMI-PLC for Potable Water Well

Directory of Open Access Journals (Sweden)

Quezada-Quezada José Carlos

2014-01-01

Full Text Available This project reports on the design and implementation in a workbench of a control and monitoring system of the discharge of water of a well. Graphic User's Interfaces (GUI are designed for interaction with the operator. The Human Machine Interface (HMI was implement in proprietor software and it contemplates the rules for control and monitoring of the conditions of the system for the operator, the HMI is also interconnected a Programmable Logic Controller (PLC where the rules of protection of the process are implemented in Ladder Diagram (LD.

Design and Implementation of a Management Control System

Directory of Open Access Journals (Sweden)

Anca Antoaneta VĂRZARU

2015-09-01

Full Text Available This paper tries to implement a management control system to raise the performance of a company with the objective to define and align to the entire organization toward a common strategy and sustainable for all. Information was collected from the major critical issues in order to detect the key sectors of the company where a change is needed. It was established the strategy to be followed and defined management indicators that allowed monitor and validate the implementation of the strategy through the Control Panel and strategic initiatives. Four initiatives were developed to understand the effect that has the control system in the management of the company generating positive results observed in the analysis of results. In order to maintain the strategy was necessary to develop audit reports to permanently check the system status.

Extreme load alleviation using industrial implementation of active trailing edge flaps in a full design load basis

DEFF Research Database (Denmark)

Barlas, Athanasios; Pettas, Vasilis; Gertz, Drew Patrick

2016-01-01

The application of active trailing edge flaps in an industrial oriented implementation is evaluated in terms of capability of alleviating design extreme loads. A flap system with basic control functionality is implemented and tested in a realistic full Design Load Basis (DLB) for the DTU 10MW...

Design and Implementation of a Sort-Free K-Best Sphere Decoder

KAUST Repository

Mondal, Sudip

2012-10-18

This paper describes the design and VLSI architecture for a 4x4 breadth first K-Best MIMO decoder using a 64 QAM scheme. A novel sort free approach to path extension, as well as quantized metrics result in a high throughput VLSI architecture with lower power and area consumption compared to state of the art published systems. Functionality is confirmed via an FPGA implementation on a Xilinx Virtex II Pro FPGA. Comparison of simulation and measurements are given and FPGA utilization figures are provided. Finally, VLSI architectural tradeoffs are explored for a synthesized ASIC implementation in a 65nm CMOS technology.

MODEL - INTEGRAL METHODOLOGY FOR SUCCESSFUL DESIGNING AND IMPLEMENTING OF TQM SYSTEM IN MACEDONIAN COMPANIES

Directory of Open Access Journals (Sweden)

Elizabeta Mitreva

2011-12-01

Full Text Available The subject of this paper is linked with the valorization of the meaning and the perspectives of Total Quality Management (TQM system design and implementation within the domestic companies and creating a model-methodology for improved performance, efficiency and effectiveness. The research is designed as an attempt to depict the existing condition in the Macedonian companies regarding quality system design and implementation, analysed through 4 polls in the "house of quality" whose top is the ultimate management, and as its bases measurement, evaluation, analyzing and comparison of the quality are used. This "house" is being held by 4 subsystems e.g. internal standardization, methods and techniques for flawless work performance, education and motivation and analyses of the quality costs. The data received from the research and the proposal of the integral methodology for designing and implementing of TQM system are designed in turn to help and present useful directions to all Macedonian companies tending to become "world class" organizations. The basis in the creation of this model is the redesign of the business processes which afterword begins as a new phase of the business performance - continued improvement, rolling of Deming's Quality Circle (Plan-Do-Check-Act. The model-methodology proposed in this paper is integral and universal which means that it is applicable to all companies regardless of the business area.

Design and implementation of an identification system in construction site safety for proactive accident prevention.

Science.gov (United States)

Yang, Huanjia; Chew, David A S; Wu, Weiwei; Zhou, Zhipeng; Li, Qiming

2012-09-01

Identifying accident precursors using real-time identity information has great potential to improve safety performance in construction industry, which is still suffering from day to day records of accident fatality and injury. Based on the requirements analysis for identifying precursor and the discussion of enabling technology solutions for acquiring and sharing real-time automatic identification information on construction site, this paper proposes an identification system design for proactive accident prevention to improve construction site safety. Firstly, a case study is conducted to analyze the automatic identification requirements for identifying accident precursors in construction site. Results show that it mainly consists of three aspects, namely access control, training and inspection information and operation authority. The system is then designed to fulfill these requirements based on ZigBee enabled wireless sensor network (WSN), radio frequency identification (RFID) technology and an integrated ZigBee RFID sensor network structure. At the same time, an information database is also designed and implemented, which includes 15 tables, 54 queries and several reports and forms. In the end, a demonstration system based on the proposed system design is developed as a proof of concept prototype. The contributions of this study include the requirement analysis and technical design of a real-time identity information tracking solution for proactive accident prevention on construction sites. The technical solution proposed in this paper has a significant importance in improving safety performance on construction sites. Moreover, this study can serve as a reference design for future system integrations where more functions, such as environment monitoring and location tracking, can be added. Copyright © 2011 Elsevier Ltd. All rights reserved.

ICAS-PAT: A Software for Design, Analysis and Validation of PAT Systems

DEFF Research Database (Denmark)

Singh, Ravendra; Gernaey, Krist; Gani, Rafiqul

2010-01-01

end product qualities. In an earlier article, Singh et al. [Singh, R., Gernaey, K. V., Gani, R. (2009). Model-based computer-aided framework for design of process monitoring and analysis systems. Computers & Chemical Engineering, 33, 22–42] proposed the use of a systematic model and data based...... methodology to design appropriate PAT systems. This methodology has now been implemented into a systematic computer-aided framework to develop a software (ICAS-PAT) for design, validation and analysis of PAT systems. Two supporting tools needed by ICAS-PAT have also been developed: a knowledge base...... (consisting of process knowledge as well as knowledge on measurement methods and tools) and a generic model library (consisting of process operational models). Through a tablet manufacturing process example, the application of ICAS-PAT is illustrated, highlighting as well, the main features of the software....

Integrating reliability analysis and design

International Nuclear Information System (INIS)

Rasmuson, D.M.

1980-10-01

This report describes the Interactive Reliability Analysis Project and demonstrates the advantages of using computer-aided design systems (CADS) in reliability analysis. Common cause failure problems require presentations of systems, analysis of fault trees, and evaluation of solutions to these. Results have to be communicated between the reliability analyst and the system designer. Using a computer-aided design system saves time and money in the analysis of design. Computer-aided design systems lend themselves to cable routing, valve and switch lists, pipe routing, and other component studies. At EG and G Idaho, Inc., the Applicon CADS is being applied to the study of water reactor safety systems

Design and Implementation of Demand Response Information Interactive Service Platform Based on “Internet Plus” Smart Energy

Science.gov (United States)

Cui, Gaoying; Fan, Jie; Qin, Yuchen; Wang, Dong; Chen, Guangyan

2017-05-01

In order to promote the effective use of demand response load side resources, promote the interaction between supply and demand, enhance the level of customer service and achieve the overall utilization of energy, this paper briefly explain the background significance of design demand response information platform and current situation of domestic and foreign development; Analyse the new demand of electricity demand response combined with the application of Internet and big data technology; Design demand response information platform architecture, construct demand responsive system, analyse process of demand response strategy formulate and intelligent execution implement; study application which combined with the big data, Internet and demand response technology; Finally, from information interaction architecture, control architecture and function design perspective design implementation of demand response information platform, illustrate the feasibility of the proposed platform design scheme implemented in a certain extent.

Control circuits in power electronics practical issues in design and implementation

CERN Document Server

Castilla, Miguel

2016-01-01

Control circuits are a key element in the operation and performance of power electronics converters. This book describes practical issues related to the design and implementation of these control circuits, and is divided into three parts - analogue control circuits, digital control circuits, and new trends in control circuits.

Design and Implementation of a Research-Informed Water Conservation Education Program

Science.gov (United States)

Thompson, Ruthanne; Coe, Alice; Klaver, Irene; Dickson, Kenneth

2011-01-01

Informed by the results of a baseline research study of regional citizen knowledge and understanding concerning watershed issues, a team of university faculty and classroom teachers designed and implemented a water conservation education program to address lacking areas of watershed knowledge. The authors developed age-appropriate, hands-on…

Intentional research design in implementation science: implications for the use of nomothetic and idiographic assessment.

Science.gov (United States)

Lyon, Aaron R; Connors, Elizabeth; Jensen-Doss, Amanda; Landes, Sara J; Lewis, Cara C; McLeod, Bryce D; Rutt, Christopher; Stanick, Cameo; Weiner, Bryan J

2017-09-01

The advancement of implementation science is dependent on identifying assessment strategies that can address implementation and clinical outcome variables in ways that are valid, relevant to stakeholders, and scalable. This paper presents a measurement agenda for implementation science that integrates the previously disparate assessment traditions of idiographic and nomothetic approaches. Although idiographic and nomothetic approaches are both used in implementation science, a review of the literature on this topic suggests that their selection can be indiscriminate, driven by convenience, and not explicitly tied to research study design. As a result, they are not typically combined deliberately or effectively. Thoughtful integration may simultaneously enhance both the rigor and relevance of assessments across multiple levels within health service systems. Background on nomothetic and idiographic assessment is provided as well as their potential to support research in implementation science. Drawing from an existing framework, seven structures (of various sequencing and weighting options) and five functions (Convergence, Complementarity, Expansion, Development, Sampling) for integrating conceptually distinct research methods are articulated as they apply to the deliberate, design-driven integration of nomothetic and idiographic assessment approaches. Specific examples and practical guidance are provided to inform research consistent with this framework. Selection and integration of idiographic and nomothetic assessments for implementation science research designs can be improved. The current paper argues for the deliberate application of a clear framework to improve the rigor and relevance of contemporary assessment strategies.

A Components Database Design and Implementation for Accelerators and Detectors

International Nuclear Information System (INIS)

Chan, A.; Meyer, S.

2011-01-01

Many accelerator and detector systems being fabricated for the PEP-II Accelerator and BABAR Detector needed configuration control and calibration measurements tracked for their components. Instead of building a database for each distinct system, a Components Database was designed and implemented that can encompass any type of component and any type of measurement. In this paper we describe this database design that is especially suited for the engineering and fabrication processes of the accelerator and detector environments where there are thousands of unique component types. We give examples of information stored in the Components Database, which includes accelerator configuration, calibration measurements, fabrication history, design specifications, inventory, etc. The World Wide Web interface is used to access the data, and templates are available for international collaborations to collect data off-line.

The implementation of customer profitability analysis: a case study

NARCIS (Netherlands)

van Raaij, E.M.; Vernooij, M.J.A.; Vernooij, Maarten J.A.; van Triest, S.P.

2003-01-01

By using customer profitability analysis (CPA), firms can determine the profit contribution of customer segments and/or individual customers. This article presents an approach for the implementation of CPA. The implementation process is illustrated using a case study of a firm producing and selling

A statistical design for testing apomictic diversification through linkage analysis.

Science.gov (United States)

Zeng, Yanru; Hou, Wei; Song, Shuang; Feng, Sisi; Shen, Lin; Xia, Guohua; Wu, Rongling

2014-03-01

The capacity of apomixis to generate maternal clones through seed reproduction has made it a useful characteristic for the fixation of heterosis in plant breeding. It has been observed that apomixis displays pronounced intra- and interspecific diversification, but the genetic mechanisms underlying this diversification remains elusive, obstructing the exploitation of this phenomenon in practical breeding programs. By capitalizing on molecular information in mapping populations, we describe and assess a statistical design that deploys linkage analysis to estimate and test the pattern and extent of apomictic differences at various levels from genotypes to species. The design is based on two reciprocal crosses between two individuals each chosen from a hermaphrodite or monoecious species. A multinomial distribution likelihood is constructed by combining marker information from two crosses. The EM algorithm is implemented to estimate the rate of apomixis and test its difference between two plant populations or species as the parents. The design is validated by computer simulation. A real data analysis of two reciprocal crosses between hickory (Carya cathayensis) and pecan (C. illinoensis) demonstrates the utilization and usefulness of the design in practice. The design provides a tool to address fundamental and applied questions related to the evolution and breeding of apomixis.

A microdisplay-based HUD for automotive applications: Backplane design, planarization, and optical implementation

Science.gov (United States)

Schuck, Miller Harry

Automotive head-up displays require compact, bright, and inexpensive imaging systems. In this thesis, a compact head-up display (HUD) utilizing liquid-crystal-on-silicon microdisplay technology is presented from concept to implementation. The thesis comprises three primary areas of HUD research: the specification, design and implementation of a compact HUD optical system, the development of a wafer planarization process to enhance reflective device brightness and light immunity and the design, fabrication and testing of an inexpensive 640 x 512 pixel active matrix backplane intended to meet the HUD requirements. The thesis addresses the HUD problem at three levels, the systems level, the device level, and the materials level. At the systems level, the optical design of an automotive HUD must meet several competing requirements, including high image brightness, compact packaging, video-rate performance, and low cost. An optical system design which meets the competing requirements has been developed utilizing a fully-reconfigurable reflective microdisplay. The design consists of two optical stages, the first a projector stage which magnifies the display, and a second stage which forms the virtual image eventually seen by the driver. A key component of the optical system is a diffraction grating/field lens which forms a large viewing eyebox while reducing the optical system complexity. Image quality biocular disparity and luminous efficacy were analyzed and results of the optical implementation are presented. At the device level, the automotive HUD requires a reconfigurable, video-rate, high resolution image source for applications such as navigation and night vision. The design of a 640 x 512 pixel active matrix backplane which meets the requirements of the HUD is described. The backplane was designed to produce digital field sequential color images at video rates utilizing fast switching liquid crystal as the modulation layer. The design methodology is discussed

Finite Element Analysis and Design of Experiments in Engineering Design

OpenAIRE

Eriksson, Martin

1999-01-01

Projects with the objective of introducing Finite Element Analysis (FEA) into the early phases of the design process have previously been carried out at the Department of Machine Design, see e.g. the Doctoral thesis by Burman [13]. These works clearly highlight the usefulness of introducing design analysis early in the design process. According to Bjärnemo and Burman [10] the most significant advantage of applying design analysis early in the design process was the shift from verification to ...

Efficient Architecture and Implementation of Vector Median Filter in Co-Design Context

Directory of Open Access Journals (Sweden)

N. Masmoudi

2007-09-01

Full Text Available This work presents an efficient fast parallel architecture of the Vector Median Filter (VMF using combined hardware/software (HW/SW implementation. The hardware part of the system is implemented using VHDL language, whereas the software part is developed using C/C++ language. The software part of the embedded system uses the NIOS-II softcore processor and the operating system used is μClinux. The comparison between the software and HW/SW solutions shows that adding a hardware part in the design attempts to speed up the filtering process compared to the software solution. This efficient embedded system implementation can perform well in several image processing applications.

Extreme load alleviation using industrial implementation of active trailing edge flaps in a full design load basis

OpenAIRE

Barlas, Athanasios; Pettas, Vasilis; Gertz, Drew Patrick; Aagaard Madsen , Helge

2016-01-01

The application of active trailing edge flaps in an industrial oriented implementation is evaluated in terms of capability of alleviating design extreme loads. A flap system with basic control functionality is implemented and tested in a realistic full Design Load Basis (DLB) for the DTU 10MW Reference Wind Turbine (RWT) model and for an upscaled rotor version in DTU's aeroelastic code HAWC2. The flap system implementation shows considerable potential in reducing extreme loads in components o...

RTOD- RADIAL TURBINE OFF-DESIGN PERFORMANCE ANALYSIS

Science.gov (United States)

Glassman, A. J.

1994-01-01

The RTOD program was developed to accurately predict radial turbine off-design performance. The radial turbine has been used extensively in automotive turbochargers and aircraft auxiliary power units. It is now being given serious consideration for primary powerplant applications. In applications where the turbine will operate over a wide range of power settings, accurate off-design performance prediction is essential for a successful design. RTOD predictions have already illustrated a potential improvement in off-design performance offered by rotor back-sweep for high-work-factor radial turbines. RTOD can be used to analyze other potential performance enhancing design features. RTOD predicts the performance of a radial turbine (with or without rotor blade sweep) as a function of pressure ratio, speed, and stator setting. The program models the flow with the following: 1) stator viscous and trailing edge losses; 2) a vaneless space loss between the stator and the rotor; and 3) rotor incidence, viscous, trailing-edge, clearance, and disk friction losses. The stator and rotor viscous losses each represent the combined effects of profile, endwall, and secondary flow losses. The stator inlet and exit and the rotor inlet flows are modeled by a mean-line analysis, but a sector analysis is used at the rotor exit. The leakage flow through the clearance gap in a pivoting stator is also considered. User input includes gas properties, turbine geometry, and the stator and rotor viscous losses at a reference performance point. RTOD output includes predicted turbine performance over a specified operating range and any user selected flow parameters. The RTOD program is written in FORTRAN IV for batch execution and has been implemented on an IBM 370 series computer with a central memory requirement of approximately 100K of 8 bit bytes. The RTOD program was developed in 1983.

Analysis design and implementation of a data backup system and restoration of information based on AVAMAR Software

Directory of Open Access Journals (Sweden)

Wilson Chango

2017-12-01

Full Text Available The objective of this research is to make a system for the backup of the information of virtual environments and computers of end users through the LAN network, covering, for this purpose, the analysis, design and implementation at the laboratory level, of a system of specialized backups for these environments in this way was thus checked for its performance and its feasibility of execution, from a technical point of view. AVAMAR, emerges as a solution alternative to face the challenges of those IT environments where backups and retrieval of information demand shorter time windows, more agile recovery responses, end user support and virtual machines. The architecture and technology of this backup and recovery solution makes it ideal for a reference study that shows everything that can be achieved in the complex and varied world of information backup. The scenario that was raised concerns a typical infrastructure consisting of physical, virtual servers, a LAN and a SAN network, users of desktop computers and laptops, end users had connectivity to the servers through the LAN, these computer equipment had Windows as an operating system, a virtual environment was established that was executed on the physical servers, the environment was fully operational and functional, all services were active and users could access them from the LAN network . From this scenario, we analyzed the benefits of the system of backups of the information of end users and virtual machines, optimizing resources such as hardware, software and execution time of backup and recovery tasks

Conceptual Design Approach to Implementing Hardware-based Security Controls in Data Communication Systems

International Nuclear Information System (INIS)

Ibrahim, Ahmad Salah; Jung, Jaecheon

2016-01-01

In the Korean Advanced Power Reactor (APR1400), safety control systems network is electrically isolated and physically separated from non-safety systems data network. Unidirectional gateways, include data diode fiber-optic cabling and computer-based servers, transmit the plant safety critical parameters to the main control room (MCR) for control and monitoring processes. The data transmission is only one-way from safety to non-safety. Reverse communication is blocked so that safety systems network is protected from potential cyberattacks or intrusions from non-safety side. Most of commercials off-the-shelf (COTS) security devices are software-based solutions that require operating systems and processors to perform its functions. Field Programmable Gate Arrays (FPGAs) offer digital hardware solutions to implement security controls such as data packet filtering and deep data packet inspection. This paper presents a conceptual design to implement hardware-based network security controls for maintaining the availability of gateway servers. A conceptual design of hardware-based network security controls was discussed in this paper. The proposed design is aiming at utilizing the hardware-based capabilities of FPGAs together with filtering and DPI functions of COTS software-based firewalls and intrusion detection and prevention systems (IDPS). The proposed design implemented a network security perimeter between the DCN-I zone and gateway servers zone. Security control functions are to protect the gateway servers from potential DoS attacks that could affect the data availability and integrity

Conceptual Design Approach to Implementing Hardware-based Security Controls in Data Communication Systems

Energy Technology Data Exchange (ETDEWEB)

Ibrahim, Ahmad Salah; Jung, Jaecheon [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2016-10-15

In the Korean Advanced Power Reactor (APR1400), safety control systems network is electrically isolated and physically separated from non-safety systems data network. Unidirectional gateways, include data diode fiber-optic cabling and computer-based servers, transmit the plant safety critical parameters to the main control room (MCR) for control and monitoring processes. The data transmission is only one-way from safety to non-safety. Reverse communication is blocked so that safety systems network is protected from potential cyberattacks or intrusions from non-safety side. Most of commercials off-the-shelf (COTS) security devices are software-based solutions that require operating systems and processors to perform its functions. Field Programmable Gate Arrays (FPGAs) offer digital hardware solutions to implement security controls such as data packet filtering and deep data packet inspection. This paper presents a conceptual design to implement hardware-based network security controls for maintaining the availability of gateway servers. A conceptual design of hardware-based network security controls was discussed in this paper. The proposed design is aiming at utilizing the hardware-based capabilities of FPGAs together with filtering and DPI functions of COTS software-based firewalls and intrusion detection and prevention systems (IDPS). The proposed design implemented a network security perimeter between the DCN-I zone and gateway servers zone. Security control functions are to protect the gateway servers from potential DoS attacks that could affect the data availability and integrity.

Practical applications approach to design, development and implementation of an integrated management system

International Nuclear Information System (INIS)

Holdsworth, Rodger

2003-01-01

The introduction of quality, risk, safety, health and environmental management philosophies has significantly changed industry's view of company organization and controlling processes. Quality, risk, safety, health and environmental programs and systems, such as ISO 9000, ISO 14000, process safety, and risk management are impacting the way industry will meet the challenges of safety and environmental risks and the needs of the customer in the future. A wealth of knowledge has been extracted from practical application case studies, which would otherwise be unobtainable without years of experience related to management systems design, development, implementation and control. This paper discusses a practical applications approach to design, develop and implement an integrated management system encompassing quality (ISO 9000), process safety management (CFR 29 1910.119), risk management programs (CFR 40 part 68), environmental management (ISO 14000), and safety and health. This paper includes a discussion of management systems integration and an overview of management systems standards that apply to the petrochemical and chemical manufacturers industries. The paper also provides an overview on integrating management systems, including issues related to the following topics: - Establishing a management system team and objectives. - Assessing and knowing your organization. - Designing the management system to meet site objectives. - Developing system documentation. - Implementing effective management systems. - Measuring program performance. - Continuous improvement

Guest Editorial Special Section on Systems of Power Converters: Design, Modeling, Control, and Implementation

DEFF Research Database (Denmark)

Liu, Wenxin; Guerrero, Josep M.; Kim, Jang Mok

2017-01-01

In this Special Section on Systems of Power Converters: Design, Modeling, Control, and Implementation, we have 11 high-quality papers approved for publication that cover the following three topics. 1) Converter Design and Operation. 2) Subsystem-Level Applications. 3) System-Level Applications...

Batch management based monitoring system: design, implement, and visualization

International Nuclear Information System (INIS)

Kan Bowen; Shi Jingyan

2012-01-01

Torque, an efficient PBS (Portable Batch System)-based open source Resource Management system, was originally developed by Ames research center of NASA, which was designed to satisfy the computing requirements of heterogeneous network. With the development of distributed computing, Torque has been widely used in high performance computing cluster. However, because of the lack of a well designed monitoring system, it is difficult to monitor, record, and control, leading to low stability, reliability and manageability. To overcome those problems, this paper designs and implements an adaptive lightweight monitoring system for torque from five aspects. 1) A lightweight circulating filtration logging system is developed to obtain the real-time running status of torque; 2) One uniform interface was provided for administrators to define monitoring commands, which can query management resources of torque; 3) Storage strategy is designed to make monitoring information persistent; 4) One uniform interface is provided for users to customized alarms, which can submit exceptions and errors to users via emails and SMS in real time; 5) HTML5 technology is applied in the customizable visualization of the jobs' status in torque in real time. (authors)

Analysis and Implement of Broadcast Program Monitoring Data

Directory of Open Access Journals (Sweden)

Song Jin Bao

2016-01-01

Full Text Available With the rapid development of the radio and TV industry and the implementation of INT (the integration of telecommunications networks, cable TV networks and the Internet, the contents of programs and advertisements is showing massive, live and interactive trends. In order to meet the security of radio and television, the broadcast of information have to be controlled and administered. In order to master the latest information of public opinion trends through radio and television network, it is necessary research the specific industry applications of broadcast program monitoring. In this paper, the importance of broadcast monitoring in public opinion analysis is firstly analysed. The monitoring radio and television programs broadcast system architecture is proposed combining with the practice, focusing on the technical requirements and implementation process of program broadcast, advertisement broadcast and TV station broadcast monitoring. The more efficient information is generated through statistical analysis, which provides data analysis for radio and television public opinion analysis.

Model-based design of RNA hybridization networks implemented in living cells.

Science.gov (United States)

Rodrigo, Guillermo; Prakash, Satya; Shen, Shensi; Majer, Eszter; Daròs, José-Antonio; Jaramillo, Alfonso

2017-09-19

Synthetic gene circuits allow the behavior of living cells to be reprogrammed, and non-coding small RNAs (sRNAs) are increasingly being used as programmable regulators of gene expression. However, sRNAs (natural or synthetic) are generally used to regulate single target genes, while complex dynamic behaviors would require networks of sRNAs regulating each other. Here, we report a strategy for implementing such networks that exploits hybridization reactions carried out exclusively by multifaceted sRNAs that are both targets of and triggers for other sRNAs. These networks are ultimately coupled to the control of gene expression. We relied on a thermodynamic model of the different stable conformational states underlying this system at the nucleotide level. To test our model, we designed five different RNA hybridization networks with a linear architecture, and we implemented them in Escherichia coli. We validated the network architecture at the molecular level by native polyacrylamide gel electrophoresis, as well as the network function at the bacterial population and single-cell levels with a fluorescent reporter. Our results suggest that it is possible to engineer complex cellular programs based on RNA from first principles. Because these networks are mainly based on physical interactions, our designs could be expanded to other organisms as portable regulatory resources or to implement biological computations. © The Author(s) 2017. Published by Oxford University Press on behalf of Nucleic Acids Research.

HARDWARE IMPLEMENTATION OF PIPELINE BASED ROUTER DESIGN FOR ON-CHIP NETWORK

Directory of Open Access Journals (Sweden)

U. Saravanakumar

2012-12-01

Full Text Available As the feature size is continuously decreasing and integration density is increasing, interconnections have become a dominating factor in determining the overall quality of a chip. Due to the limited scalability of system bus, it cannot meet the requirement of current System-on-Chip (SoC implementations where only a limited number of functional units can be supported. Long global wires also cause many design problems, such as routing congestion, noise coupling, and difficult timing closure. Network-on-Chip (NoC architectures have been proposed to be an alternative to solve the above problems by using a packet-based communication network. In this paper, the Circuit-Switched (CS Router was designed and analysed the various parameters such as power, timing and area. The CS router has taken more number of cycles to transfer the data from source to destination. So the pipelining concept was implemented by adding registers in the CS router architecture. The proposed architecture increases the speed of operation and reduces the critical path of the circuit. The router has been implemented using Verilog HDL. The parameters area, power and timing were calculated in 130 nm CMOS technology using Synopsys tool with nominal operating voltage of 1V and packet size is 39 bits. Finally power, area and time of these two routers have been analysed and compared.

DESIGN, CONSTRUCTION AND IMPLEMENTATION OF A 3 METER SATELLITE DISH ANTENNA (PARABOLOID REFLECTORS)

OpenAIRE

Danladi A; Jerome G

2008-01-01

The objective of this work is to design, construct and implement a 3m diameter paraboloid reflector with a frequency allocation of 3GHZ and above. The design was achieved with the help of wire mesh, aluminum span, mild steel, aluminum foil and glass fiber. The designed model was able to pick up signal from Arabian Satellite CNN, Adamawa Broadcasting television station and other channels with the help of low noise amplification block (LNB)

Arch-pattern based design and aspect-oriented implementation of Readers-Writers concurrent problem

Directory of Open Access Journals (Sweden)

Dumitru Ciorbă

2007-11-01

Full Text Available The classical problems of concurrent programming start from the design problems of operating systems in the 80-s. But today there are still proposed new solutions for these problems with the help of various design and programming approaches. The present article describes a solution which was designed according to some new object-oriented principles, based on design patterns and proposes two program solutions: firstly - an object-oriented implementation in Java language, the secondly – an aspect-oriented one in AspectJ language.

Design and implementation of parallel video encoding strategies using divisible load analysis

NARCIS (Netherlands)

Li, Ping; Veeravalli, Bharadwaj; Kassim, A.A.

2005-01-01

The processing time needed for motion estimation usually accounts for a significant part of the overall processing time of the video encoder. To improve the video encoding speed, reducing the execution time for motion estimation process is essential. Parallel implementation of video encoding systems

Design and implementation of a risk assessment module in a spatial decision support system

Science.gov (United States)

Zhang, Kaixi; van Westen, Cees; Bakker, Wim

2014-05-01

The spatial decision support system named 'Changes SDSS' is currently under development. The goal of this system is to analyze changing hydro-meteorological hazards and the effect of risk reduction alternatives to support decision makers in choosing the best alternatives. The risk assessment module within the system is to assess the current risk, analyze the risk after implementations of risk reduction alternatives, and analyze the risk in different future years when considering scenarios such as climate change, land use change and population growth. The objective of this work is to present the detailed design and implementation plan of the risk assessment module. The main challenges faced consist of how to shift the risk assessment from traditional desktop software to an open source web-based platform, the availability of input data and the inclusion of uncertainties in the risk analysis. The risk assessment module is developed using Ext JS library for the implementation of user interface on the client side, using Python for scripting, as well as PostGIS spatial functions for complex computations on the server side. The comprehensive consideration of the underlying uncertainties in input data can lead to a better quantification of risk assessment and a more reliable Changes SDSS, since the outputs of risk assessment module are the basis for decision making module within the system. The implementation of this module will contribute to the development of open source web-based modules for multi-hazard risk assessment in the future. This work is part of the "CHANGES SDSS" project, funded by the European Community's 7th Framework Program.

The role of the Pharmacist in the design, development and implementation of Medication Prescription Support Systems

Directory of Open Access Journals (Sweden)

Núria Solà Bonada

2016-11-01

Full Text Available Clinical Decision Support Systems (CDSS are computerized tools designed to help healthcare professionals to make clinical and therapeutic decisions, with the objective of improving patient care. Prescription-targeted CDSS have the highest impact in improving patient safety. Although there are different designs and functionalities, all these systems will combine clinical knowledge and patient information in a smart manner, in order to improve the prescription process. With the emergence of new technologies and advances in smart decision systems, the implementation of said systems can achieve an important improvement in terms of the prescription process and patient safety. The design and implementation of these systems should be performed by a multidisciplinary team of professionals, where Pharmacists will play an important role due to their technical knowledge about medications and the technologies associated to their use. This article aims to provide basic guidelines for the design and adequate implementation, monitoring and follow-up of Clinical Decision Support Systems within the setting of pharmacological prescription.

Design and implementation of fixed-order robust controllers for a proton exchange membrane fuel cell system

Energy Technology Data Exchange (ETDEWEB)

Wang, Fu-Cheng; Chen, Hsuan-Tsung [Department of Mechanical Engineering, National Taiwan University, No.1, Sec. 4, Roosevelt Road, 10617 Taipei (China)

2009-03-15

This paper applies fixed-order multivariable robust control strategies to a proton exchange membrane fuel cell (PEMFC) system, and implements the designed controllers on a microchip for system miniaturization. In previous studies, robust control was applied to guarantee system stability and to reduce hydrogen consumption for a PEMFC system. It was noted that for standard robust control design, the order of resulting H{sub {infinity}} controllers is dictated by the plants and weighting functions. However, for hardware implementation, controllers with lower orders are preferable in terms of computing efforts and cost. Therefore, in this paper the PEMFC is modeled as multivariable transfer matrices, then three fixed-order robust control algorithms are applied to design controllers with specified orders for a PEMFC. Finally, the designed controllers are implemented on a microchip to regulate the air and hydrogen flow rates. From the experimental results, fixed-order robust control is deemed effective in supplying steady power and reducing fuel consumption. (author)

The daylighting dashboard - A simulation-based design analysis for daylit spaces

Energy Technology Data Exchange (ETDEWEB)

Reinhart, Christoph F. [Harvard University, Graduate School of Design, 48 Quincy Street, Cambridge, MA 02138 (United States); Wienold, Jan [Fraunhofer Institute for Solar Energy Systems, Heidenhofstrasse 2, 79110 Freiburg (Germany)

2011-02-15

This paper presents a vision of how state-of-the-art computer-based analysis techniques can be effectively used during the design of daylit spaces. Following a review of recent advances in dynamic daylight computation capabilities, climate-based daylighting metrics, occupant behavior and glare analysis, a fully integrated design analysis method is introduced that simultaneously considers annual daylight availability, visual comfort and energy use: Annual daylight glare probability profiles are combined with an occupant behavior model in order to determine annual shading profiles and visual comfort conditions throughout a space. The shading profiles are then used to calculate daylight autonomy plots, energy loads, operational energy costs and green house gas emissions. The paper then shows how simulation results for a sidelit space can be visually presented to simulation non-experts using the concept of a daylighting dashboard. The paper ends with a discussion of how the daylighting dashboard could be practically implemented using technologies that are available today. (author)

A metacomputing environment for demanding applications: design, implementation, experiments and business benefit

NARCIS (Netherlands)

Meliones, A.N.; Varvarigou, T.A.; Tsagronis, P.; Emmen, A.; Barosan, I.

1999-01-01

The paper describes the design, implementation, and use of a commercial metacomputing environment for computationally intensive loosely-coupled parallel applications. Much weight has been laid on practical and commercialisation aspects, and on business benefit. This distinguishes this work from many

THE BASE OF THE METHODICAL DESIGN AND IMPLEMENTATION OF ENGINEERING EDUCATION PROCESS

Directory of Open Access Journals (Sweden)

Renata Lis

2012-12-01

Full Text Available The article is devoted to the methodology of implementation of European and national qualifications framework in the academic process. It consists of: the methodic of design degree programs and classes and the methodic of the teaching process.

Design and implementation of distributed spatial computing node based on WPS

International Nuclear Information System (INIS)

Liu, Liping; Li, Guoqing; Xie, Jibo

2014-01-01

Currently, the research work of SIG (Spatial Information Grid) technology mostly emphasizes on the spatial data sharing in grid environment, while the importance of spatial computing resources is ignored. In order to implement the sharing and cooperation of spatial computing resources in grid environment, this paper does a systematical research of the key technologies to construct Spatial Computing Node based on the WPS (Web Processing Service) specification by OGC (Open Geospatial Consortium). And a framework of Spatial Computing Node is designed according to the features of spatial computing resources. Finally, a prototype of Spatial Computing Node is implemented and the relevant verification work under the environment is completed

327 Building fire hazards analysis implementation plan

International Nuclear Information System (INIS)

BARILO, N.F.

1999-01-01

In March 1998, the 327 Building Fire Hazards Analysis (FHA) (Reference 1) was approved by the U.S. Department of Energy, Richland Operations Office (DOE-E) for implementation by B and W Hanford Company (BWC). The purpose of the FHA was to identify gaps in compliance with DOE Order 5480.7A (Reference 2) and Richland Operations Office Implementation Directive (RLID) 5480.7 (Reference 3), especially in regard to loss limitation. The FHA identified compliance gaps in five areas and provided nine recommendations (11 items) to bring the 327 Building into compliance. A status is provided for each recommendation in this document. BWHC will use this Implementation Plan to bring the 327 Building and its operation into compliance with DOE Order 5480.7A and IUD 5480.7

Designing and implementing transparency for real time inspection of autonomous robots

Science.gov (United States)

Theodorou, Andreas; Wortham, Robert H.; Bryson, Joanna J.

2017-07-01

The EPSRC's Principles of Robotics advises the implementation of transparency in robotic systems, however research related to AI transparency is in its infancy. This paper introduces the reader of the importance of having transparent inspection of intelligent agents and provides guidance for good practice when developing such agents. By considering and expanding upon other prominent definitions found in literature, we provide a robust definition of transparency as a mechanism to expose the decision-making of a robot. The paper continues by addressing potential design decisions developers need to consider when designing and developing transparent systems. Finally, we describe our new interactive intelligence editor, designed to visualise, develop and debug real-time intelligence.

Designing a total data solution technology, implementation, and deployment

CERN Document Server

Burkey, Roxanne

2000-01-01

Your company's global competitiveness depends on the utilization and maintenance of information. Current data handling practices-storing, updating, and accessing data-can be either a problem or a significant strategic advantage for your company. Designing a Total Data Storage Solution: Technology, Implementation, and Deployment gives you the information you need to compare current technologies and determine which is best suited to your enterprise.This book defines and explains the components that make up total cost of ownership along with the impact of integrating current changes in technology

Design and Implementation of an Enterprise Internet of Things

Science.gov (United States)

Sun, Jing; Zhao, Huiqun; Wang, Ka; Zhang, Houyong; Hu, Gongzhu

Since the notion of "Internet of Things" (IoT) introduced about 10 years ago, most IoT research has focused on higher level issues, such as strategies, architectures, standardization, and enabling technologies, but studies of real cases of IoT are still lacking. In this paper, a real case of Internet of Things called ZB IoT is introduced. It combines the Service Oriented Architecture (SOA) with EPC global standards in the system design, and focuses on the security and extensibility of IoT in its implementation.

Design, Development and Implementation of Decision Support Systems for Private Equity Investment

OpenAIRE

Vroomen, Paul

2017-01-01

The objective of this research is to design, develop and implement an intelligent decision support system (IDSS) for making rational private equity investment decisions. (Private equity investments are capital investments in enterprises that are not traded on public equity markets; they include Equity Buy-Out, Venture Capital, and the new Equity Crowd Funding (ECF) asset classes). The design and development of the IDSS requires the integration of investment science (valuation theory, portfoli...

Design and Implementation of the ATLAS Detector Control System

CERN Document Server

Boterenbrood, H; Cook, J; Filimonov, V; Hallgren, B I; Heubers, W P J; Khomoutnikov, V; Ryabov, Yu; Varela, F

2004-01-01

The overall dimensions of the ATLAS experiment and its harsh environment, due to radiation and magnetic field, represent new challenges for the implementation of the Detector Control System. It supervises all hardware of the ATLAS detector, monitors the infrastructure of the experiment, and provides information exchange with the LHC accelerator. The system must allow for the operation of the different ATLAS sub-detectors in stand-alone mode, as required for calibration and debugging, as well as the coherent and integrated operation of all sub-detectors for physics data taking. For this reason, the Detector Control System is logically arranged to map the hierarchical organization of the ATLAS detector. Special requirements are placed onto the ATLAS Detector Control System because of the large number of distributed I/O channels and of the inaccessibility of the equipment during operation. Standardization is a crucial issue for the design and implementation of the control system because of the large variety of e...

Effects of Language of Implementation on Functional Analysis Outcomes

Science.gov (United States)

Rispoli, Mandy; O'Reilly, Mark; Lang, Russell; Sigafoos, Jeff; Mulloy, Austin; Aguilar, Jeannie; Singer, George

2011-01-01

This study evaluated the influence of language of implementation on functional analysis outcomes for a child with a severe intellectual disability from a Spanish-speaking home. Challenging behavior was assessed during 5-min sessions under 4 conditions; attention, play-verbal, play-nonverbal, and demand and across 2 phases; implementation in…

Brief cognitive behavioral therapy in primary care: a hybrid type 2 patient-randomized effectiveness-implementation design

Directory of Open Access Journals (Sweden)

Cully Jeffrey A

2012-07-01

Full Text Available Abstract Background Despite the availability of evidence-based psychotherapies for depression and anxiety, they are underused in non-mental health specialty settings such as primary care. Hybrid effectiveness-implementation designs have the potential to evaluate clinical and implementation outcomes of evidence-based psychotherapies to improve their translation into routine clinical care practices. Methods This protocol article discusses the study methodology and implementation strategies employed in an ongoing, hybrid, type 2 randomized controlled trial with two primary aims: (1 to determine whether a brief, manualized cognitive behavioral therapy administered by Veterans Affairs Primary Care Mental Health Integration program clinicians is effective in treating depression and anxiety in a sample of medically ill (chronic cardiopulmonary diseases primary care patients and (2 to examine the acceptability, feasibility, and preliminary outcomes of a focused implementation strategy on improving adoption and fidelity of brief cognitive behavioral therapy at two Primary Care-Mental Health Integration clinics. The study uses a hybrid type 2 effectiveness/implementation design to simultaneously test clinical effectiveness and to collect pilot data on a multifaceted implementation strategy that includes an online training program, audit and feedback of session content, and internal and external facilitation. Additionally, the study engages the participation of an advisory council consisting of stakeholders from Primary Care-Mental Health Integration, as well as regional and national mental health leaders within the Veterans Administration. It targets recruitment of 320 participants randomized to brief cognitive behavioral therapy (n = 200 or usual care (n = 120. Both effectiveness and implementation outcomes are being assessed using mixed methods, including quantitative evaluation (e.g., intent-to-treat analyses across multiple time points and

Brief cognitive behavioral therapy in primary care: a hybrid type 2 patient-randomized effectiveness-implementation design.

Science.gov (United States)

Cully, Jeffrey A; Armento, Maria E A; Mott, Juliette; Nadorff, Michael R; Naik, Aanand D; Stanley, Melinda A; Sorocco, Kristen H; Kunik, Mark E; Petersen, Nancy J; Kauth, Michael R

2012-07-11

Despite the availability of evidence-based psychotherapies for depression and anxiety, they are underused in non-mental health specialty settings such as primary care. Hybrid effectiveness-implementation designs have the potential to evaluate clinical and implementation outcomes of evidence-based psychotherapies to improve their translation into routine clinical care practices. This protocol article discusses the study methodology and implementation strategies employed in an ongoing, hybrid, type 2 randomized controlled trial with two primary aims: (1) to determine whether a brief, manualized cognitive behavioral therapy administered by Veterans Affairs Primary Care Mental Health Integration program clinicians is effective in treating depression and anxiety in a sample of medically ill (chronic cardiopulmonary diseases) primary care patients and (2) to examine the acceptability, feasibility, and preliminary outcomes of a focused implementation strategy on improving adoption and fidelity of brief cognitive behavioral therapy at two Primary Care-Mental Health Integration clinics. The study uses a hybrid type 2 effectiveness/implementation design to simultaneously test clinical effectiveness and to collect pilot data on a multifaceted implementation strategy that includes an online training program, audit and feedback of session content, and internal and external facilitation. Additionally, the study engages the participation of an advisory council consisting of stakeholders from Primary Care-Mental Health Integration, as well as regional and national mental health leaders within the Veterans Administration. It targets recruitment of 320 participants randomized to brief cognitive behavioral therapy (n = 200) or usual care (n = 120). Both effectiveness and implementation outcomes are being assessed using mixed methods, including quantitative evaluation (e.g., intent-to-treat analyses across multiple time points) and qualitative methods (e.g., focus interviews

Design and implementation of a microcontroller-based maximum power point tracking fuzzy solar-charge controller

Energy Technology Data Exchange (ETDEWEB)

Qazalbash, A.A.; Iqbal, T.; Shafiq, M.Z. [National Univ. of Sciences and Technology, Rawalpindi (Pakistan). Dept. of Electrical Engineering

2007-07-01

Photovoltaic (PV) solar arrays are particularly useful for electrical power generation in remote, off-grid areas in developing countries. However, PV arrays offer a small power to area ratio, resulting in the need for more PV arrays which increases the cost of the system. In order to improve the profitability of PV arrays, the power extraction from available PV array systems must be maximized. This paper presented an analysis, modeling and implementation of an efficient solar charge controller. It was shown that the maximum power of a photovoltaic system depends largely on temperature and insolation. A perturb and observe algorithm was used for maximum power point tracking (MPPT). MPPT maximizes the efficiency of a solar PV system. A solar charge controller determines the optimal values of output current and voltage of converters to maximize power output for battery charging. In order to improve performance and implement the perturb and observe algorithm, the authors designed a fuzzy rule-based system in which a solar charge controller worked with a PWM controlled DC-DC converter for battery charging. The system was implemented on a low-cost PIC microcontroller. Results were better than conventional techniques in power efficiency. Swift maximum power point tracking was obtained. 13 refs., 1 tab., 11 figs.

Adaptation and implementation of the TRACE code for transient analysis in designs lead cooled fast reactors

International Nuclear Information System (INIS)

Lazaro, A.; Ammirabile, L.; Martorell, S.

2015-01-01

Lead-Cooled Fast Reactor (LFR) has been identified as one of promising future reactor concepts in the technology road map of the Generation IVC International Forum (GIF)as well as in the Deployment Strategy of the European Sustainable Nuclear Industrial Initiative (ESNII), both aiming at improved sustainability, enhanced safety, economic competitiveness, and proliferation resistance. This new nuclear reactor concept requires the development of computational tools to be applied in design and safety assessments to confirm improved inherent and passive safety features of this design. One approach to this issue is to modify the current computational codes developed for the simulation of Light Water Reactors towards their applicability for the new designs. This paper reports on the performed modifications of the TRACE system code to make it applicable to LFR safety assessments. The capabilities of the modified code are demonstrated on series of benchmark exercises performed versus other safety analysis codes. (Author)

Design and implementation of Web-based SDUV-FEL engineering database system

International Nuclear Information System (INIS)

Sun Xiaoying; Shen Liren; Dai Zhimin; Xie Dong

2006-01-01

A design of Web-based SDUV-FEL engineering database and its implementation are introduced. This system will save and offer static data and archived data of SDUV-FEL, and build a proper and effective platform for share of SDUV-FEL data. It offers usable and reliable SDUV-FEL data for operators and scientists. (authors)

Pumps modelling of a sodium fast reactor design and analysis of hydrodynamic behavior

Directory of Open Access Journals (Sweden)

Ordóñez Ródenas José

2016-01-01

Full Text Available One of the goals of Generation IV reactors is to increase safety from those of previous generations. Different research platforms have been identified the need to improve the reliability of the simulation tools to ensure the capability of the plant to accommodate the design basis transients established in preliminary safety studies. The paper describes the modelling of primary pumps in advanced sodium cooled reactors using the TRACE code. Following the implementation of the models, the results obtained in the analysis of different design basis transients are compared with the simplifying approximations used in reference models. The paper shows the process to obtain a consistent pump model of the ESFR (European Sodium Fast Reactor design and the analysis of loss of flow transients triggered by pumps coast–down analyzing the thermal hydraulic neutronic coupled system response. A sensitivity analysis of the system pressure drops effect and the other relevant parameters that influence the natural convection after the pumps coast–down is also included.

Implementation of a Bayesian Engine for Uncertainty Analysis

Energy Technology Data Exchange (ETDEWEB)

Leng Vang; Curtis Smith; Steven Prescott

2014-08-01

In probabilistic risk assessment, it is important to have an environment where analysts have access to a shared and secured high performance computing and a statistical analysis tool package. As part of the advanced small modular reactor probabilistic risk analysis framework implementation, we have identified the need for advanced Bayesian computations. However, in order to make this technology available to non-specialists, there is also a need of a simplified tool that allows users to author models and evaluate them within this framework. As a proof-of-concept, we have implemented an advanced open source Bayesian inference tool, OpenBUGS, within the browser-based cloud risk analysis framework that is under development at the Idaho National Laboratory. This development, the “OpenBUGS Scripter” has been implemented as a client side, visual web-based and integrated development environment for creating OpenBUGS language scripts. It depends on the shared server environment to execute the generated scripts and to transmit results back to the user. The visual models are in the form of linked diagrams, from which we automatically create the applicable OpenBUGS script that matches the diagram. These diagrams can be saved locally or stored on the server environment to be shared with other users.

Analysis and design of a genetic circuit for dynamic metabolic engineering.

Science.gov (United States)

Anesiadis, Nikolaos; Kobayashi, Hideki; Cluett, William R; Mahadevan, Radhakrishnan

2013-08-16

Recent advances in synthetic biology have equipped us with new tools for bioprocess optimization at the genetic level. Previously, we have presented an integrated in silico design for the dynamic control of gene expression based on a density-sensing unit and a genetic toggle switch. In the present paper, analysis of a serine-producing Escherichia coli mutant shows that an instantaneous ON-OFF switch leads to a maximum theoretical productivity improvement of 29.6% compared to the mutant. To further the design, global sensitivity analysis is applied here to a mathematical model of serine production in E. coli coupled with a genetic circuit. The model of the quorum sensing and the toggle switch involves 13 parameters of which 3 are identified as having a significant effect on serine concentration. Simulations conducted in this reduced parameter space further identified the optimal ranges for these 3 key parameters to achieve productivity values close to the maximum theoretical values. This analysis can now be used to guide the experimental implementation of a dynamic metabolic engineering strategy and reduce the time required to design the genetic circuit components.

Holistic design and implementation of pressure actuated cellular structures

International Nuclear Information System (INIS)

Gramüller, B; Köke, H; Hühne, C

2015-01-01

Providing the possibility to develop energy-efficient, lightweight adaptive components, pressure-actuated cellular structures (PACS) are primarily conceived for aeronautics applications. The realization of shape-variable flaps and even airfoils provides the potential to safe weight, increase aerodynamic efficiency and enhance agility. The herein presented holistic design process points out and describes the necessary steps for designing a real-life PACS structure, from the computation of truss geometry to the manufacturing and assembly. The already published methods for the form finding of PACS are adjusted and extended for the exemplary application of a variable-camber wing. The transfer of the form-finding truss model to a cross-sectional design is discussed. The end cap and sealing concept is described together with the implementation of the integral fluid flow. Conceptual limitations due to the manufacturing and assembly processes are discussed. The method’s efficiency is evaluated by finite element method. In order to verify the underlying methods and summarize the presented work a modular real-life demonstrator is experimentally characterized and validates the numerical investigations. (paper)

Phenomenology and Curriculum Implementation: Discerning a Living Curriculum through the Analysis of Ted Aoki's Situational Praxis

Science.gov (United States)

Magrini, James M.

2015-01-01

The argumentation in this paper is grounded in a critical and conceptual analysis of Ted Aoki's phenomenology, wherein curriculum is read as "phenomenological text." The problem explored emerges from Aoki's critique of the Tyler rationale for curriculum design, implementation and evaluation as it is conceived and practised in…

Design and Implementation of a Pilot Obesity Prevention Program in a Low-Resource School: Lessons Learned and Research Recommendations

Science.gov (United States)

Baskin, Monica L.; Zunker, Christie; Worley, Courtney B.; Dial, Brenda; Kimbrough, Linda

2009-01-01

Purpose: This paper seeks to describe the design, implementation, and lessons learned from an obesity prevention pilot program delivered in a low resource school in the USA. Design/methodology/approach: A planned program evaluation was conducted to: document explicitly the process of designing and implementing the program; and assess the…

Design and Implementation of a Mechanical Control System for the Scanning Microwave Limb Sounder

Science.gov (United States)

Bowden, William

2011-01-01

The Scanning Microwave Limb Sounder (SMLS) will use technological improvements in low noise mixers to provide precise data on the Earth's atmospheric composition with high spatial resolution. This project focuses on the design and implementation of a real time control system needed for airborne engineering tests of the SMLS. The system must coordinate the actuation of optical components using four motors with encoder readback, while collecting synchronized telemetric data from a GPS receiver and 3-axis gyrometric system. A graphical user interface for testing the control system was also designed using Python. Although the system could have been implemented with a FPGA-based setup, we chose to use a low cost processor development kit manufactured by XMOS. The XMOS architecture allows parallel execution of multiple tasks on separate threads-making it ideal for this application and is easily programmed using XC (a subset of C). The necessary communication interfaces were implemented in software, including Ethernet, with significant cost and time reduction compared to an FPGA-based approach. For these reasons, the XMOS technology is an attractive, cost effective, alternative to FPGA-based technologies for this design and similar rapid prototyping projects.

Management implementation plan for a safety analysis and review system

International Nuclear Information System (INIS)

Hulburt, D.A.; Berkey, B.D.

1981-04-01

The US Department of Energy has issued an Order, DOE 5481.1, which establishes uniform requirements for the preparation and review of Safety Analysis for DOE Operations. The Management Implementation Plan specified herein establishes the administrative procedures and technical requirements for implementing DOE 5481.1 to Operations under the cognizance of the Pittsburgh Energy Technology Center. This Implementation Plan is applicable to all present and future Operations under the cognizance of PETC. The Plan identifies those Operations for which DOE 5481.1 is applicable and those Operations for which no further analysis is required because the initial determination and review has concluded that DOE 5481.1 does not apply

ANALYSIS OF URBAN AND EDUCATIONAL INFRASTRUCTURE IN DISADVANTAGED AREAS OF BEACH TOWN WITH THE IMPLEMENTATION OF PHOTOVOLTAIC ENERGY; STUDY CASE PUERTO VALLARTA, MEXICO