WorldWideScience

Sample records for analyses analise automatica

  1. Automatic inspection of oil and gas pipe welded joints by radiographic images analyses; Analise automatica de imagens radiologicas aplicada a inspecao de juntas soldadas em tubulacoes de oleo e gas

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, Guilherme A.; Felisberto, Marcelo K.; Pilkel, Lucas V.; Centeno, Tania M.; Arruda, Lucia V.R. [Centro Federal de Educacao Tecnologica do Parana (CEFET-PR), Curitiba, PR (Brazil). Curso de Pos-graduacao em Engenharia Eletrica e Informatica (CPGEI). Lab. de Automacao e Sistemas de Controle Avancado

    2004-07-01

    The reliability and integrity evaluation of structures and equipment on the petroleum and gas industry is an absolute necessary care due to economic reasons and safety. As a consequence, new supporting technologies for well known nondestructive test and evaluation methods have been developed in order to automate these inspection processes, improving their robustness, accuracy and quickness. On this way, the present work introduces solutions to overcome some obstacles to the automation of the radiographic image analysis task for the pipeline weld joint inspection, on radiographic non-destructive tests and evaluations. The main contributions are related to the improvements to techniques for the automatic weld bean segmentation and the development of an effective algorithm for the weld bean defect detection and extraction of relevant defect descriptors. (author)

  2. Physiological and enzymatic analyses of pineapple subjected to ionizing radiation; Analises fisiologicas e enzimaticas em abacaxi submetido a tecnologia de radiacao ionizante

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Josenilda Maria da [Centro de Energia Nuclear na Agricultura (CENA), Piracicaba, SP (Brazil)]. E-mail: jmnilda@yahoo.com.br; Silva, Juliana Pizarro; Spoto, Marta Helena Fillet [Escola Superior de Agricultura Luiz de Queiroz (ESALQ/USP), Piracicaba, SP (Brazil)

    2007-07-15

    The physiological and enzymatic post-harvest characteristics of the pineapple cultivar Smooth Cayenne were evaluated after the fruits were gamma-irradiated with doses of 100 and 150 Gy and the fruits were stored for 10, 20 and 30 days at 12 deg C ({+-}1) and relative humidity of 85% ({+-}5). Physiological and enzymatic analyses were made for each storage period to evaluate the alterations resulting from the application of ionizing radiation. Control specimens showed higher values of soluble pectins, total pectins, reducing sugars, sucrose and total sugars and lower values of polyphenyloxidase and polygalacturonase enzyme activities. All the analyses indicated that storage time is a significantly influencing factor. The 100 Gy dosage and 20-day storage period presented the best results from the standpoint of maturation and conservation of the fruits quality. (author)

  3. Analyse of the international recommendations on the calculation of absorbed dose in the biota; Analise das recomendacoes internacionais sobre calculo de dose absorvida na biota

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Wagner de S.; Py Junior, Delcy de A., E-mail: wspereira@inb.gov.b, E-mail: delcy@inb.gov.b [Industrias Nucleares do Brasil (UTM/INB), Pocos de Caldas, MG (Brazil). Unidade de Tratamento de Minerios; Universidade Federal Fluminense (LARARA/UFF), Niteroi, RJ (Brazil). Lab. de Radiobiologia e Radiometria; Kelecom, Alphonse [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Programa de Pos-Graduacao em Ciencia Ambiental

    2011-10-26

    This paper evaluates the recommendations of ICRP which has as objective the environmental radioprotection. It was analysed the recommendations 26, 60, 91, 103 and 108 of the ICRP. The ICRP-103 defined the concept of animal and plant of reference (APR) to be used in the RAP based on the calculation of absorbed dose based on APR concept. This last view allows to build a legal framework of environmental protection with a etic, moral and scientific visualization, more defensible than the anthropomorphic concept

  4. QUALITY ASSURANCE PERFORMANCE AUDIT REPORT FOR THE SECRETARIA DEL MEDIO AMBIENTE CIUDAD DE MEXICO, DF, MEXICO RED AUTOMATICA DE MONITOREO ATMOSFERICO (RAMA) AIR QUALITY MONITORING STATIONS

    Science.gov (United States)

    The United States Environmental Protection Agency (U.S. EPA) conducted this evaluation of the air monitoring network, known as RAM (Red Automatica de Monitoreo Atmosferico) at the request of the Mexico City Secretariat of the Environment on October 16-27, 2000. This evaluation...

  5. BESKRYWING VAI'l TEGNIEKE EN CHEMIESE ANALISES VAN ...

    African Journals Online (AJOL)

    afwykings en koefftsiente van variasie tussen monsters en tussen analises binne monsters verstrek. Tussen monsters verteenwoordig die verskille tussen diere en tussen ana- lises binne monsters verteenwoordig die verskille tussen herhalings binne dieselfde monstefS en dui dus die akku- raatheid van die analises aan.

  6. Automatic national network of radiation environmental monitoring in Mexico; Red nacional automatica de monitoreo radiologico ambiental en Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Aguirre, Jaime; Delgado, Jose L.; Lopez, Manuel; Zertuche, Jorge V., E-mail: jaguirre@cnsns.gob.mx, E-mail: jldelgado@cnsns.gob.mx, E-mail: mlopez@cnsns.gob.mx, E-mail: jorge.zertuche@cnsns.gob.mx [Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS), D.F. (Mexico). Direccion de Vigilancia Radiologica

    2013-07-01

    The Direccion de Vigilancia Radiologica (DVR) of the Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS) de Mexico, performs several function for environmental radiation monitoring. One of these functions is the permanent monitoring of the environmental gamma radiation. For this, it implemented the Red Nacional Automatica de Monitoreo Radiologico Ambiental (RENAMORA) - the National Automated Network for Environmental Radiation Monitoring,which currently comprises 60 detector probes for gamma radiation which with a programmable system that includes information technologies, data transmission and software can send the information in real time to a primary center of data located in the facilities of CNSNS. - When the data are received, the system performs the verification and extraction of the information organized in Tables and charts, and generates a report of environmental gamma radiation dose rate average for each of the probes and for each period of time determined bu CNSNS. The RENAMORA covers the main cities and allows to establish the bases of almost the entire country, as well as to warn about abnormal situations caused by incidents or natural events generated by human activities inside or outside the country which involves radioactive materials; paying special attention to main radiological sites, such as the surroundings of the Laguna Verde Nuclear Power Plants, research centers and the radioactive waste disposal sites.

  7. Blood concentrations of ions and metals in amateur and elite runners using neutron activation analyses; Concentracoes de ions e metais em sangue de atletas amadores e de elite usando analise por ativacao neutronica

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Luciana Kovacs dos

    2012-07-01

    In this study Br, Ca, Cl, Fe, I, K, Mg, Na, S and Zn concentration were investigated in blood of Brazilian athletes (endurance) using Neutron Activation Analyses technique (NAA). The blood samples were collected from male amateur athletes (AR) and male and female elite athletes (ER), ranging from 18 to 36 year old. The blood samples were collected at the LABEX/UNICAMP and they were irradiated in the nuclear reactor IEA-R1 at IPEN (Sao Paulo, Brazil). The range (at rest) established for AR and ER were compared with the control group (CG), subjects of same gender and age but not involved with physical activities, and showed significant differences for Ca (51 - 439 mgL{sup -1} for CG, 162 - 410 mgL{sup -1} for AR and 64 - 152 mgL{sup -1} for ER) and Br (7.4 - 30.6 mgL{sup -1} for CG, 4.0 - 9.6 mgL{sup -1} for AR and 1.9 - 3.5 mgL{sup -1} for ER), suggesting that a strong dependency of these limits in function of adopted physical training exists. We also performed a systematic investigation for the AR before, during and after the exercise program. These data can be considered for the preparation of a balanced diet, for evaluating the performance of the athletes during the period of competition preparation as well as contributing for proposing new protocols of clinical evaluation not reported in the literature yet. (author)

  8. Optimization of a computer simulation code to analyse thermal systems for solar energy water heating; Aperfeicoamento de um programa de simulacao computacional para analise de sistemas termicos de aquecimento de agua por energia solar

    Energy Technology Data Exchange (ETDEWEB)

    Pozzebon, Felipe Barin

    2009-02-15

    The potential of solar water heating systems through solar energy in Brazil is excellent due to the climatic features of the country. The performance of these systems is highly influenced also by the materials used to build it and by the dimension of its equipment and components. In face of global warming, solar energy gains more attention, since it is one of the renewable energy that will be largely used to replace some of the existing polluting types of energy. This paper presents the improvement of a software that conducts simulations of water heating systems using solar energy in thermosyphon regime or forced circulation. TermoSim, as it is called, was initiated at the Solar Labs, and is in its version 3.0. The current version is capable of simulating 6 different arrangements' possibilities combined with auxiliary energy: systems with solar collectors with auxiliary energy with gas, electric energy, internal electric energy, electric energy in series with the consumption line, and no auxiliary energy. The software is a tool to aid studies and analysis of solar heating systems, it has a friendly interface that is easy to comprehend and results are simple to use. Besides that, this version also allows simulations that consider heat losses at night, situation in which a reverse circulation can occur and mean efficiency loss, depending on the simulated system type. There were many simulations with the mathematical models used and comparisons were made with the climatic data of the city of Caxias do Sul, in Rio Grande do Sul state, in Brazil, determining the system with the most efficient configuration for the simulated water consume profile. The paper is finalized with simple economic analyses with the intention of foreseeing the time for payback on the investment, taking into account the current prices for electrical energy in the simulated area and the possible monthly economy provided with the use of a solar energy heating system. (author)

  9. n Analise van die gemeente as deel van hierdie proses

    African Journals Online (AJOL)

    phase of this subject is the analysis of the situation in the local church. The purpose of the analysis is to syste matically ... planned carefully. This study gives attention to a plan ned situation-analysis of the local church. 1. ...... 6.1.2.5 Die dinkskrum en 'swot'-analise. 'n Dinkskrum is 'n tegniek waar 'n groep soveel as moontlik ...

  10. Impact of uranium concentration reduction in side plates of the fuel elements of IEA-R1 reactor on neutronic and thermal hydraulic analyses; Impacto da reducao na concentracao de uranio nas placas laterais dos elementos combustiveis do reator IEA-R1 nas analises neutronica e termo-hidraulica

    Energy Technology Data Exchange (ETDEWEB)

    Rios, Ilka Antonia

    2013-09-01

    This master thesis presents a study to verify the impact of the uranium concentration reduction in the side plates of the reactor IEA-R1 fuel elements on the neutronic and thermal-hydraulic analyses. To develop such study, a previous IPEN-CNEN/SP research was reproduced by simulating the fuel elements burn-up, with side plate uranium density reduced to 50, 60 and 70% of the standard fuel element plates. This research begins with the neutronic analysis using the computer code HAMMER and the first step consists in the calculation of the cross section of all materials presented at the reactor core, with their initial concentration; the second step consists in the calculation of the fast and thermal neutron group fluxes and power densities for fuel elements using the computer code CITATION. HAMMER output data is used as input data. Once the neutronic analysis is finished and the most critical fuel elements with highest power density have been defined, the thermal-hydraulics analysis begins. This analysis uses MCTR-IEA-R1 thermal-hydraulics model, which equations are solved by commercial code EES. Thermalhydraulics analysis input is the power density data calculated by CITATION: it is considered the highest power density on each fuel element, where there is a higher energy release and, consequently, higher temperatures. This data is used on energy balance equations to calculate temperatures on critical fuel element regions. Reactor operation comparison for three different uranium densities on fuel side plates is presented. Uranium density reduction contributes to the cladding surface temperature to remain below the established limit, as reactor operation safety requirement and it does not affect significantly fuel element final burn-up nor reactor reactivity. The reduction of uranium in the side plates of the fuel elements of the IEA-R1 showed to be a viable option to avoid corrosion problems due to high temperatures. (author)

  11. Development of a YouTube videos feelings analiser = Desarrollo de un analizador de sentimientos de videos de Youtube

    OpenAIRE

    Valle Salas, José Miguel del

    2018-01-01

    Nowadays, Youtube is one of the most successful social networks, therefore it has more and more impact in our society. Due to this it's quite useful to know the sentiments that this platform videos produces. This project has been focused in the development of a tool able to analise this sentiments, which could be used for di�erent purposes like Market studies or emotional learning for people who has some functional diversity. The technologies used during the project development has b...

  12. In situ isotopic analyses of U and Pb in zircon by remotely operated SHRIMP II, and Hf by LA-ICP-MS: an example of dating and genetic evolution of zircon by {sup 176}Hf/{sup 177}Hf from the Ita Quarry in the Atuba Complex, SE, Brazil; Analises in situ de U e Pb em zircao por SRIMP II por controle remoto e de Hf por LA-ICP-MS: um exemplo de datacao e da evolucao genetica de zircao atraves da razao {sup 176}Hf/{sup 177} em amostra da Pedreira Ita no Complexo Atuba, SE, Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Sato, K.; Siga Junior, Oswaldo; McReath, Ian; Sproesser, Walter; Basei, Miguel Angelo Stipp [Universidade de Sao Paulo (USP), SP (Brazil). Inst. de Geociencias. Centro de Pesquisas Geocronologicas], e-mail: keisato@usp.br, e-mail: osigajr@usp.br, e-mail: ianmcr@usp.br, e-mail: wmspres@usp.br, e-mail: baseimas@usp.br; Silva, Josiane Aline da [Universidade de Sao Paulo (USP), SP (Brazil). Programa de Pos-graduacao em Geoquimica e Geotectonica; Dunyi, Liu [Institute of Geology, Beijing (China); Iizuka, Takafumi; Rino, Shuji; Hirata, Takafumi [Tokyo Institute of Technology, Tokyo (Japan)

    2009-10-15

    Remotely-operated SHRIMP dating of zircon is an interesting alternative for dating of zircon crystals. Although it does not represent any technical progress of the geochronological method using the U-Pb system in zircon it is a very useful and cheap facility. The procedure was first used for mass spectrometric analyses involving two international laboratories in Sao Paulo, Brazil and Beijing, China. It was applied to samples of three gneiss-migmatitic rocks from the Ita quarry in the Atuba Complex (located between the Luis Alves and the Apiai Domain) to test previous controversial hypotheses about its evolution. The presence of important archaean and paleo proterozoic components in the complex is confirmed by analyses of zircon found in probably neo proterozoic leucosomes. Diorite intrusion also occurred during the neo proterozoic, associated with the 0.6Ga continental collisions involved in the assembly of Gondwana. The determination of Hf isotope ratios by LA-ICP/MS represents a new option for checking the relative importance of mantle ({epsilon}{sub Hf} > 0) and crustal contributions (({epsilon}{sub Hf} < 0) during the growth of the zircon crystals. While the archaean component in the complex was derived from the mantle ({epsilon}{sub Hf} + 1.5 to + 8.7) the paleo proterozoic component had a crustal contribution ({epsilon}{sub Hf} - 9.1 to -10.1). (author)

  13. APLICAÇÃO DO METODO DE ANÁLISE HIERARQUICA (MAH NA ANALISE E AVALIAÇÃO DE IMPACTOS AMBIENTAIS DOS SISTEMAS DE TRANSPORTES URBANOS

    Directory of Open Access Journals (Sweden)

    Dominique Mouette

    2010-04-01

    Full Text Available

    O estudo de impacto ambiental envolve uma grande quantidade de critérios e parâmetros, sendo necessário o trabalho conjunto de uma equipe multidisciplinar. A complexidade dos impactos decorrentes dos sistemas de transporte urbanos que possuem características e magnitudes muito diferentes, somada a não obrigatoriedade do estudo, fizeram com que poucos estudos fossem efetuados e tornou evidente a necessidade de metodologias de avaliação dos mesmos. Este estudo aborda a utilização do Método de Analise Hierárquica, um procedimento multicriterial na analise e avaliação dos impactos ambientais dos sistemas de transportes urbanos.

    ABSTRACT

    The study of environmental impacts involves a large amount of criteria and parameters being necessary to work with a multisciplinary team. The impacts due to urban transportation are very complex having different characteristics and magnitude, besides that, in Brazil, these studies are not obliged by law. These facts leads to few studies of the environmental impacts and evidences the necessity of developing methodologies which makes possible the impact's evaluation. This study refers to the utilization of the Analytical Hierarchy Process, a multicriteria procedure in the evaluation and analysis of environmental impacts in urban transportation.

  14. Kinematics, dynamics and structural analyses of a semi-passive mechanical arm; Analise cinematica, dinamica e estrutural de um manipulador semi-passivo

    Energy Technology Data Exchange (ETDEWEB)

    Ferreira, Claudio Violante [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Romano, Vitor Ferreira [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola Politecnica

    2008-07-01

    This work presents the dynamics and kinematics modeling, and the structural analysis (including modal analysis) of a gantry type Semi-Passive mechanical Arm (SPA). The kinematics analysis of the SPA is referred in the Joints Space Coordinates. The Denavit-Hartenberg (D-H) parameterization method is used in the manipulator kinematics model. The dynamics analysis is also referred in the Joints Space, and done by means of Lagrange Equations. To develop the dynamic equations it were considered the joints friction and the external loads related to marine currents and the AUV/SPA interaction. The dynamics analysis it was done in two SPA configurations: all joints with activated brakes (locked) and all joints with not activated brakes. A commercial FEM program, ANSYS{sup R} 5.5.1, was used to calculate the structural deformations and tensions, and these results were used to define the final structure configuration. This program has a Static Analysis Package which permits to determine the displacements, stresses, strains and forces in structures caused by external loads. In order to evaluate the SPA structural stiffness it was done the modal analysis and the determination of five SPA vibration modes and natural frequencies. (author)

  15. Mechanical analyses of pipeline repair and reinforcement with use of composite functionally graded materials; Analise mecanica de reforco de dutos submarinos com materiais compositos com gradacao funcional

    Energy Technology Data Exchange (ETDEWEB)

    Queiroz, Marcos S.M. [Sondotecnica Engenharia de Solos S.A., Rio de Janeiro, RJ (Brazil); Roehl, Deane de Mesquita [Pontificia Universidade Catolica do Rio de Janeiro (PUC-Rio), RJ (Brazil)

    2008-07-01

    This work presents a methodology for design of stiffener sleeve constituted by functionally graded composite materials in offshore pipelines located in extreme-deep waters, where high mechanical resistance allied to an efficient system of thermal isolation is necessary, in view of the excellent thermomechanical behavior of composites. For the case of FGMs, due to continuous variation in its featuring, is necessary to employ an adapted model, based on a model typically adopted for conventional composites (Rule of Mixture), as the model idealized by Tamura, Tomato e Ozawa, the TTO model. In this report, the influence of geometric and materials parameters in mechanical behavior of pipelines under propagating collapse is analyzed. (author)

  16. Ergonomic analyse of operation work in electric energy transmission substation; Analise ergonomica do trabalho de operacao de subestacoes de transmissao de energia eletrica

    Energy Technology Data Exchange (ETDEWEB)

    Menegon, Nilton Luiz

    1993-04-01

    The activity by the workers in sub-stations which transmits and distributes electric energy is studied within the context of ergonomic, i.e., of its adequateness to the human being characteristics. In the introduction of this book the ideas of ergonomic related to the behaviour of the workers who works which continuous processes in control room are reviewed. The development of the ideas in this field as well as the methodology to be followed in this work are discussed. The technical system involving the activities of the workers in sub-station is presented. These activities are inserted within a broad context of the electric energy sector. An analysis concerning the problems in the ergonomic field which justifies the ergonomic intervention follows the previous study. The work situation is characterized. The formal organization of the work and its physical and cognitive demands are examined. The task is explained in detail. With the analysis of the activities based on the systematic observation of the work performed by the workers, we finish this study. Finely, a diagnosis of the work situation and the recommendations compromised whit the workers health and improvement of the performance is settled. (author) 27 refs., 26 figs.

  17. Traduccion automatica mediante el ordenador (Automatic Translation Using a Computer).

    Science.gov (United States)

    Bueno, Julian L.

    This report on machine translation contains a brief history of the field; a description of the processes involved; a discussion of systems currently in use, including three software packages on the market (Teaching Assistant, Translate, and Globalink); reflections on implications for teaching; observations of results obtained when elements of…

  18. Mechanism for automatic regulation of combustion. Regolazione automatica della combustione

    Energy Technology Data Exchange (ETDEWEB)

    Borelli, L.; Tagliaferro, B.; Cossalter, V.; Da Lio, M. (Padua Univ. (Italy))

    1993-09-01

    The article describes an original application of a mechanism for the automatic regulation of burners. The aim is to maintain a constant air-fuel ratio even with variations occurring in ambient temperature and fuel supply. To obtain the correct mixture, the air damper is opened with a double mechanism by an ambient temperature transducer and by a screw for the setting up of the rate of fuel supply.

  19. ’n Retoriese analise van die vyf lykdigte in T.T. Cloete se Allotroop

    Directory of Open Access Journals (Sweden)

    L. Viljoen

    1995-05-01

    This article works from the premise that these poems form part o f a tradition that can he traced back to the funerary poetry of the Dutch Renaissance and from there to the funeral orations of Classical times. After referring to the current revival of interest in rhetoric, attention is given to the role which rhetoric played in Renaissance poetics and the influence it had on the practice of writing funerary poetry. The funerary poems in Cloete's Allotroop are then analysed, making use of the Renaissance descriptions of and prescriptions for funerary poetry researched by S.F. Witstein in Funeraire poëzie in de Nederlandse Renaissance. These analyses prove that Cloete’s poems make use of the elements basic to the Renaissance funerary poem and the classical funeral oration namely praise (laus, mourning (luctus and consolation (consolatio and that the rhetorical terminology devised centuries ago can still be useful in the reading of these poems.

  20. MARA - methodology to analyze environmental risks; MARA - elaboracao de metodologia para analise dos riscos ambientais

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, Renato F; Yogui, Regiane [PETROBRAS, Rio de Janeiro, RJ (Brazil); Minniti, Vivienne [Companhia de Tecnologia de Saneamento Ambiental (CETESB), Sao Paulo, SP (Brazil). Setor de Analise de Riscos; Lopes, Carlos F [Companhia de Tecnologia de Saneamento Ambiental (CETESB), Sao Paulo, SP (Brazil). Setor de Operacoes de Emergencia; Milaneli, Joao [Companhia de Tecnologia de Saneamento Ambiental (CETESB), Ubatuba, SP (Brazil). Agencia Ambiental de Ubatuba; Torres, Carlos [TRANSPETRO - PETROBRAS Transportes, Sao Paulo, SP (Brazil). Seguranca, Meio Ambiente e Saude; Rodrigues, Gabriela; Mariz, Eduardo [Consultoria Paulista, SP (Brazil)

    2005-07-01

    In the oil industry, the environmental impact assessment of an accident is both multi and interdisciplinary and goes through several approaches and depths. Due to the enormous complexity of the environmental analyses issues, mainly for being a science in development and not technological consensus, a macro methodology is presented for the purpose of identify areas that can be impacted by pipeline leakages and recommend improvements are applicable working as a table top response plan. The methodology of the Environmental Risk Mapping-MARA for pipelines rows, describes its concept and justifies the adoption of the environmental mapping during Risk Analyses studies, for PETROBRAS/TRANSPETRO new and existing pipelines. The development of this methodology is justified by the fact that it is a practical tool for identification, analysis and categorization of the more vulnerable environmental elements along a pipeline row and vicinities, during simulated occurrence of accidental spills of hydrocarbons in the environment. This methodology is a tool that allows Environmental Agencies and PETROBRAS a better way to manage in advance the Company emergencies. (author)

  1. Theoretical and experimental analysis of the induction generators; Analise teorica e experimental do gerador de inducao

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Marcel; Martins Neto, Luciano; Calixto, Wesley Pacheco; Gontijo, Andre Luiz; Alves, Aylton Jose [Universidade Federal de Uberlandia (LMEE/FEELT/UFU), MG (Brazil). Fac. de Engenharia Eletrica. Lab. de Maquinas Eletricas Especiais], E-mails: marcel@mestrado.ufu.br, lmn@ufu.br, wpcalixto@ieee.org, aja@cefetgo.br

    2009-10-15

    Due to its lower costs, robustness, reduced maintenance and easy operation, the induction generator shows to be an economic alternative in small power generator systems. This work presents the initial phase of pertinent studies about the employment of the induction generator directly connected to the electrical power grid in a pilot project to be implemented at the Santa Luzia SHP. A project that aims to raise relevant operational aspects and to evidence some advantages about the employment of the induction generator in small power generator systems. This phase comprises the experimentation of an induction generator directly connected to the power grid in a laboratorial scale, plus a computational modeling which represents the same. This computational modeling takes into account loads variations which are being supplied by the generator, unbalance between phases and magnetic saturation effects, such as harmonic distortions in the generated currents. From the experimental model collected data, a theoretical-experimental confrontation of the computational modeling is made, where quantitative and qualitative analyses about the operational characteristics of the machine are made. The results of this work will head the operation and supervision of the SHP induction machine. (author)

  2. Analise van die Tswanaraaisel

    Directory of Open Access Journals (Sweden)

    S. A. Swanepoel

    1984-05-01

    Full Text Available ’n Strukturele, stilistiese en funksionele bcskrywing van die Twanaraaisel bring mee dat daar aan die volgende aspekte aandag gegee moet word: •\tWat is ’n raaisel en lioe word dit in Tswana genoem. •\tTot watter studiegebied en literere genre hoort die raaisel en watter subvorme kan vir Tswana onderskei word. •\tHoe sien die struktuur van Tswanaraaisels daar uit. •\tDeur wie, waar, wanneer en hoe word Tswanaraaisels voorgedra. •\tWatter stilistiese kenmcrke kan in Tswanaraaisels onderskei word. •\tWatter funksies vervul raaisels in ’n Tswanagcmeenskap.

  3. Laser Beam Focus Analyser

    DEFF Research Database (Denmark)

    Nielsen, Peter Carøe; Hansen, Hans Nørgaard; Olsen, Flemming Ove

    2007-01-01

    the obtainable features in direct laser machining as well as heat affected zones in welding processes. This paper describes the development of a measuring unit capable of analysing beam shape and diameter of lasers to be used in manufacturing processes. The analyser is based on the principle of a rotating......The quantitative and qualitative description of laser beam characteristics is important for process implementation and optimisation. In particular, a need for quantitative characterisation of beam diameter was identified when using fibre lasers for micro manufacturing. Here the beam diameter limits...... mechanical wire being swept through the laser beam at varying Z-heights. The reflected signal is analysed and the resulting beam profile determined. The development comprised the design of a flexible fixture capable of providing both rotation and Z-axis movement, control software including data capture...

  4. Contesting Citizenship: Comparative Analyses

    DEFF Research Database (Denmark)

    Siim, Birte; Squires, Judith

    2007-01-01

    importance of particularized experiences and multiple ineequality agendas). These developments shape the way citizenship is both practiced and analysed. Mapping neat citizenship modles onto distinct nation-states and evaluating these in relation to formal equality is no longer an adequate approach....... Comparative citizenship analyses need to be considered in relation to multipleinequalities and their intersections and to multiple governance and trans-national organisinf. This, in turn, suggests that comparative citizenship analysis needs to consider new spaces in which struggles for equal citizenship occur...

  5. Risico-analyse brandstofpontons

    NARCIS (Netherlands)

    Uijt de Haag P; Post J; LSO

    2001-01-01

    Voor het bepalen van de risico's van brandstofpontons in een jachthaven is een generieke risico-analyse uitgevoerd. Er is een referentiesysteem gedefinieerd, bestaande uit een betonnen brandstofponton met een relatief grote inhoud en doorzet. Aangenomen is dat de ponton gelegen is in een

  6. Fast multichannel analyser

    Energy Technology Data Exchange (ETDEWEB)

    Berry, A; Przybylski, M M; Sumner, I [Science Research Council, Daresbury (UK). Daresbury Lab.

    1982-10-01

    A fast multichannel analyser (MCA) capable of sampling at a rate of 10/sup 7/ s/sup -1/ has been developed. The instrument is based on an 8 bit parallel encoding analogue to digital converter (ADC) reading into a fast histogramming random access memory (RAM) system, giving 256 channels of 64 k count capacity. The prototype unit is in CAMAC format.

  7. A fast multichannel analyser

    International Nuclear Information System (INIS)

    Berry, A.; Przybylski, M.M.; Sumner, I.

    1982-01-01

    A fast multichannel analyser (MCA) capable of sampling at a rate of 10 7 s -1 has been developed. The instrument is based on an 8 bit parallel encoding analogue to digital converter (ADC) reading into a fast histogramming random access memory (RAM) system, giving 256 channels of 64 k count capacity. The prototype unit is in CAMAC format. (orig.)

  8. Possible future HERA analyses

    International Nuclear Information System (INIS)

    Geiser, Achim

    2015-12-01

    A variety of possible future analyses of HERA data in the context of the HERA data preservation programme is collected, motivated, and commented. The focus is placed on possible future analyses of the existing ep collider data and their physics scope. Comparisons to the original scope of the HERA pro- gramme are made, and cross references to topics also covered by other participants of the workshop are given. This includes topics on QCD, proton structure, diffraction, jets, hadronic final states, heavy flavours, electroweak physics, and the application of related theory and phenomenology topics like NNLO QCD calculations, low-x related models, nonperturbative QCD aspects, and electroweak radiative corrections. Synergies with other collider programmes are also addressed. In summary, the range of physics topics which can still be uniquely covered using the existing data is very broad and of considerable physics interest, often matching the interest of results from colliders currently in operation. Due to well-established data and MC sets, calibrations, and analysis procedures the manpower and expertise needed for a particular analysis is often very much smaller than that needed for an ongoing experiment. Since centrally funded manpower to carry out such analyses is not available any longer, this contribution not only targets experienced self-funded experimentalists, but also theorists and master-level students who might wish to carry out such an analysis.

  9. Biomass feedstock analyses

    Energy Technology Data Exchange (ETDEWEB)

    Wilen, C.; Moilanen, A.; Kurkela, E. [VTT Energy, Espoo (Finland). Energy Production Technologies

    1996-12-31

    The overall objectives of the project `Feasibility of electricity production from biomass by pressurized gasification systems` within the EC Research Programme JOULE II were to evaluate the potential of advanced power production systems based on biomass gasification and to study the technical and economic feasibility of these new processes with different type of biomass feed stocks. This report was prepared as part of this R and D project. The objectives of this task were to perform fuel analyses of potential woody and herbaceous biomasses with specific regard to the gasification properties of the selected feed stocks. The analyses of 15 Scandinavian and European biomass feed stock included density, proximate and ultimate analyses, trace compounds, ash composition and fusion behaviour in oxidizing and reducing atmospheres. The wood-derived fuels, such as whole-tree chips, forest residues, bark and to some extent willow, can be expected to have good gasification properties. Difficulties caused by ash fusion and sintering in straw combustion and gasification are generally known. The ash and alkali metal contents of the European biomasses harvested in Italy resembled those of the Nordic straws, and it is expected that they behave to a great extent as straw in gasification. Any direct relation between the ash fusion behavior (determined according to the standard method) and, for instance, the alkali metal content was not found in the laboratory determinations. A more profound characterisation of the fuels would require gasification experiments in a thermobalance and a PDU (Process development Unit) rig. (orig.) (10 refs.)

  10. AMS analyses at ANSTO

    Energy Technology Data Exchange (ETDEWEB)

    Lawson, E.M. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia). Physics Division

    1998-03-01

    The major use of ANTARES is Accelerator Mass Spectrometry (AMS) with {sup 14}C being the most commonly analysed radioisotope - presently about 35 % of the available beam time on ANTARES is used for {sup 14}C measurements. The accelerator measurements are supported by, and dependent on, a strong sample preparation section. The ANTARES AMS facility supports a wide range of investigations into fields such as global climate change, ice cores, oceanography, dendrochronology, anthropology, and classical and Australian archaeology. Described here are some examples of the ways in which AMS has been applied to support research into the archaeology, prehistory and culture of this continent`s indigenous Aboriginal peoples. (author)

  11. AMS analyses at ANSTO

    International Nuclear Information System (INIS)

    Lawson, E.M.

    1998-01-01

    The major use of ANTARES is Accelerator Mass Spectrometry (AMS) with 14 C being the most commonly analysed radioisotope - presently about 35 % of the available beam time on ANTARES is used for 14 C measurements. The accelerator measurements are supported by, and dependent on, a strong sample preparation section. The ANTARES AMS facility supports a wide range of investigations into fields such as global climate change, ice cores, oceanography, dendrochronology, anthropology, and classical and Australian archaeology. Described here are some examples of the ways in which AMS has been applied to support research into the archaeology, prehistory and culture of this continent's indigenous Aboriginal peoples. (author)

  12. Analyses of MHD instabilities

    International Nuclear Information System (INIS)

    Takeda, Tatsuoki

    1985-01-01

    In this article analyses of the MHD stabilities which govern the global behavior of a fusion plasma are described from the viewpoint of the numerical computation. First, we describe the high accuracy calculation of the MHD equilibrium and then the analysis of the linear MHD instability. The former is the basis of the stability analysis and the latter is closely related to the limiting beta value which is a very important theoretical issue of the tokamak research. To attain a stable tokamak plasma with good confinement property it is necessary to control or suppress disruptive instabilities. We, next, describe the nonlinear MHD instabilities which relate with the disruption phenomena. Lastly, we describe vectorization of the MHD codes. The above MHD codes for fusion plasma analyses are relatively simple though very time-consuming and parts of the codes which need a lot of CPU time concentrate on a small portion of the codes, moreover, the codes are usually used by the developers of the codes themselves, which make it comparatively easy to attain a high performance ratio on the vector processor. (author)

  13. Uncertainty Analyses and Strategy

    International Nuclear Information System (INIS)

    Kevin Coppersmith

    2001-01-01

    The DOE identified a variety of uncertainties, arising from different sources, during its assessment of the performance of a potential geologic repository at the Yucca Mountain site. In general, the number and detail of process models developed for the Yucca Mountain site, and the complex coupling among those models, make the direct incorporation of all uncertainties difficult. The DOE has addressed these issues in a number of ways using an approach to uncertainties that is focused on producing a defensible evaluation of the performance of a potential repository. The treatment of uncertainties oriented toward defensible assessments has led to analyses and models with so-called ''conservative'' assumptions and parameter bounds, where conservative implies lower performance than might be demonstrated with a more realistic representation. The varying maturity of the analyses and models, and uneven level of data availability, result in total system level analyses with a mix of realistic and conservative estimates (for both probabilistic representations and single values). That is, some inputs have realistically represented uncertainties, and others are conservatively estimated or bounded. However, this approach is consistent with the ''reasonable assurance'' approach to compliance demonstration, which was called for in the U.S. Nuclear Regulatory Commission's (NRC) proposed 10 CFR Part 63 regulation (64 FR 8640 [DIRS 101680]). A risk analysis that includes conservatism in the inputs will result in conservative risk estimates. Therefore, the approach taken for the Total System Performance Assessment for the Site Recommendation (TSPA-SR) provides a reasonable representation of processes and conservatism for purposes of site recommendation. However, mixing unknown degrees of conservatism in models and parameter representations reduces the transparency of the analysis and makes the development of coherent and consistent probability statements about projected repository

  14. A simple beam analyser

    International Nuclear Information System (INIS)

    Lemarchand, G.

    1977-01-01

    (ee'p) experiments allow to measure the missing energy distribution as well as the momentum distribution of the extracted proton in the nucleus versus the missing energy. Such experiments are presently conducted on SACLAY's A.L.S. 300 Linac. Electrons and protons are respectively analysed by two spectrometers and detected in their focal planes. Counting rates are usually low and include time coincidences and accidentals. Signal-to-noise ratio is dependent on the physics of the experiment and the resolution of the coincidence, therefore it is mandatory to get a beam current distribution as flat as possible. Using new technologies has allowed to monitor in real time the behavior of the beam pulse and determine when the duty cycle can be considered as being good with respect to a numerical basis

  15. EEG analyses with SOBI.

    Energy Technology Data Exchange (ETDEWEB)

    Glickman, Matthew R.; Tang, Akaysha (University of New Mexico, Albuquerque, NM)

    2009-02-01

    The motivating vision behind Sandia's MENTOR/PAL LDRD project has been that of systems which use real-time psychophysiological data to support and enhance human performance, both individually and of groups. Relevant and significant psychophysiological data being a necessary prerequisite to such systems, this LDRD has focused on identifying and refining such signals. The project has focused in particular on EEG (electroencephalogram) data as a promising candidate signal because it (potentially) provides a broad window on brain activity with relatively low cost and logistical constraints. We report here on two analyses performed on EEG data collected in this project using the SOBI (Second Order Blind Identification) algorithm to identify two independent sources of brain activity: one in the frontal lobe and one in the occipital. The first study looks at directional influences between the two components, while the second study looks at inferring gender based upon the frontal component.

  16. Pathway-based analyses.

    Science.gov (United States)

    Kent, Jack W

    2016-02-03

    New technologies for acquisition of genomic data, while offering unprecedented opportunities for genetic discovery, also impose severe burdens of interpretation and penalties for multiple testing. The Pathway-based Analyses Group of the Genetic Analysis Workshop 19 (GAW19) sought reduction of multiple-testing burden through various approaches to aggregation of highdimensional data in pathways informed by prior biological knowledge. Experimental methods testedincluded the use of "synthetic pathways" (random sets of genes) to estimate power and false-positive error rate of methods applied to simulated data; data reduction via independent components analysis, single-nucleotide polymorphism (SNP)-SNP interaction, and use of gene sets to estimate genetic similarity; and general assessment of the efficacy of prior biological knowledge to reduce the dimensionality of complex genomic data. The work of this group explored several promising approaches to managing high-dimensional data, with the caveat that these methods are necessarily constrained by the quality of external bioinformatic annotation.

  17. Analysing Access Control Specifications

    DEFF Research Database (Denmark)

    Probst, Christian W.; Hansen, René Rydhof

    2009-01-01

    When prosecuting crimes, the main question to answer is often who had a motive and the possibility to commit the crime. When investigating cyber crimes, the question of possibility is often hard to answer, as in a networked system almost any location can be accessed from almost anywhere. The most...... common tool to answer this question, analysis of log files, faces the problem that the amount of logged data may be overwhelming. This problems gets even worse in the case of insider attacks, where the attacker’s actions usually will be logged as permissible, standard actions—if they are logged at all....... Recent events have revealed intimate knowledge of surveillance and control systems on the side of the attacker, making it often impossible to deduce the identity of an inside attacker from logged data. In this work we present an approach that analyses the access control configuration to identify the set...

  18. Network class superposition analyses.

    Directory of Open Access Journals (Sweden)

    Carl A B Pearson

    Full Text Available Networks are often used to understand a whole system by modeling the interactions among its pieces. Examples include biomolecules in a cell interacting to provide some primary function, or species in an environment forming a stable community. However, these interactions are often unknown; instead, the pieces' dynamic states are known, and network structure must be inferred. Because observed function may be explained by many different networks (e.g., ≈ 10(30 for the yeast cell cycle process, considering dynamics beyond this primary function means picking a single network or suitable sample: measuring over all networks exhibiting the primary function is computationally infeasible. We circumvent that obstacle by calculating the network class ensemble. We represent the ensemble by a stochastic matrix T, which is a transition-by-transition superposition of the system dynamics for each member of the class. We present concrete results for T derived from boolean time series dynamics on networks obeying the Strong Inhibition rule, by applying T to several traditional questions about network dynamics. We show that the distribution of the number of point attractors can be accurately estimated with T. We show how to generate Derrida plots based on T. We show that T-based Shannon entropy outperforms other methods at selecting experiments to further narrow the network structure. We also outline an experimental test of predictions based on T. We motivate all of these results in terms of a popular molecular biology boolean network model for the yeast cell cycle, but the methods and analyses we introduce are general. We conclude with open questions for T, for example, application to other models, computational considerations when scaling up to larger systems, and other potential analyses.

  19. Seismic fragility analyses

    International Nuclear Information System (INIS)

    Kostov, Marin

    2000-01-01

    In the last two decades there is increasing number of probabilistic seismic risk assessments performed. The basic ideas of the procedure for performing a Probabilistic Safety Analysis (PSA) of critical structures (NUREG/CR-2300, 1983) could be used also for normal industrial and residential buildings, dams or other structures. The general formulation of the risk assessment procedure applied in this investigation is presented in Franzini, et al., 1984. The probability of failure of a structure for an expected lifetime (for example 50 years) can be obtained from the annual frequency of failure, β E determined by the relation: β E ∫[d[β(x)]/dx]P(flx)dx. β(x) is the annual frequency of exceedance of load level x (for example, the variable x may be peak ground acceleration), P(fI x) is the conditional probability of structure failure at a given seismic load level x. The problem leads to the assessment of the seismic hazard β(x) and the fragility P(fl x). The seismic hazard curves are obtained by the probabilistic seismic hazard analysis. The fragility curves are obtained after the response of the structure is defined as probabilistic and its capacity and the associated uncertainties are assessed. Finally the fragility curves are combined with the seismic loading to estimate the frequency of failure for each critical scenario. The frequency of failure due to seismic event is presented by the scenario with the highest frequency. The tools usually applied for probabilistic safety analyses of critical structures could relatively easily be adopted to ordinary structures. The key problems are the seismic hazard definitions and the fragility analyses. The fragility could be derived either based on scaling procedures or on the base of generation. Both approaches have been presented in the paper. After the seismic risk (in terms of failure probability) is assessed there are several approaches for risk reduction. Generally the methods could be classified in two groups. The

  20. Website-analyse

    DEFF Research Database (Denmark)

    Thorlacius, Lisbeth

    2009-01-01

    eller blindgyder, når han/hun besøger sitet. Studier i design og analyse af de visuelle og æstetiske aspekter i planlægning og brug af websites har imidlertid kun i et begrænset omfang været under reflektorisk behandling. Det er baggrunden for dette kapitel, som indleder med en gennemgang af æstetikkens......Websitet er i stigende grad det foretrukne medie inden for informationssøgning,virksomhedspræsentation, e-handel, underholdning, undervisning og social kontakt. I takt med denne voksende mangfoldighed af kommunikationsaktiviteter på nettet, er der kommet mere fokus på at optimere design og...... planlægning af de funktionelle og indholdsmæssige aspekter ved websites. Der findes en stor mængde teori- og metodebøger, som har specialiseret sig i de tekniske problemstillinger i forbindelse med interaktion og navigation, samt det sproglige indhold på websites. Den danske HCI (Human Computer Interaction...

  1. A channel profile analyser

    International Nuclear Information System (INIS)

    Gobbur, S.G.

    1983-01-01

    It is well understood that due to the wide band noise present in a nuclear analog-to-digital converter, events at the boundaries of adjacent channels are shared. It is a difficult and laborious process to exactly find out the shape of the channels at the boundaries. A simple scheme has been developed for the direct display of channel shape of any type of ADC on a cathode ray oscilliscope display. This has been accomplished by sequentially incrementing the reference voltage of a precision pulse generator by a fraction of a channel and storing ADC data in alternative memory locations of a multichannel pulse height analyser. Alternative channels are needed due to the sharing at the boundaries of channels. In the flat region of the profile alternate memory locations are channels with zero counts and channels with the full scale counts. At the boundaries all memory locations will have counts. The shape of this is a direct display of the channel boundaries. (orig.)

  2. Neutron activation analysis of phytotherapic obtained from medicinal plants; Analise por ativacao com neutrons de fitoterapicos obtidos de plantas medicinais

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Henrique S. [Universidade de Sao Paulo (USP), Ribeirao Preto, SP (Brazil). Faculdade de Ciencias Farmaceuticas]. E-mail: hs_moreira@hotmail.com; Saiki, Mitiko; Vasconcellos, Marina B.A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)]. E-mails: mitiko@ipen.br; mbvascon@ipen.br

    2007-07-01

    This paper determines the inorganic constituents in phytotherapic samples for posterior study of the relationship existent among the concentrations of the found elements and the their possible therapeutical effects. The samples of phytotherapic pills (Centella asiatica, Ginkgo biloba and Ginseng) were analysed by using neutron activation analysis (NAA). The As, Br, Ca, Co, Cr, Cs, Fe, K, La, Na, Rb, Sc, Se and Zn samples were determined in the phytotherapics, The Centella asiatica presented the higher concentrations of Br, Co, Cr, Fe, K, La, Na, Rb, Sc, Se and Zn. In the sample of Ginko biloba, higher levels of As and Ca were found, while in the sample ol Ginseng the element As were not detected. The found results have shown the the NAA method is appropriated for analysing this type of materials due to his simplicity, multielemental capacity and quality of the results obtained. (author)

  3. Analysis of the opening model of the Brazilian upstream business; Analise da adequacao do modelo de E e P brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Canelas, Andre [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Planejamento Energetico

    2004-07-01

    This paper analyses the institutional model adopted for the reform of the oil industry in Brazil, beginning with the approval of Law n. 9.478 by the Brazilian Parliament in 1997. The reform of the Brazilian oil industry took place in the context of the reforms of the world's national economies throughout the 1980's and 1990's. From this worldwide process of reform stemmed a huge increase in the international capital flow directed to long-run investment opportunities in the economic infrastructure sectors. The aim of this paper is to analyse both the regulatory model for the oil and gas upstream activities in Brazil and the bidding model adopted at Brazil's National Petroleum Agency's auctions for the acquisition of exploration areas. This paper is dedicated, in its entirety, to Prof. Carmen Alveal (in memoriam), whose knowledge, support, encouragement and friendship were, for me, the most important of all, professionally and morally. (author)

  4. Rural electrification based on photovoltaic systems: systemic evaluation and analysis; Eletrificacao rural com sistemas fotovoltaicos: avaliacao e analise sistemicas

    Energy Technology Data Exchange (ETDEWEB)

    Orellana Lafuente, Renan Jorge

    1995-07-01

    In spite of all advances made by modern technology, there are still regions which remoteness has made electrification of poor rural localities very difficult or impossible. The only practical solution for these localities is a local, decentralized form of electrical generation, such as solar energy. Based on its availability and potential, together with the scientific and technical advances made in photovoltaic conversion, solar energy is an alternative which is viable for many rural areas in developing countries. The technology has matured sufficiently, but in its application there is still a need for systematization for experiences, especially in the areas of planning and management. The present work deals with a project carried in the community of Chimboata, Chimboata department, Bolivia. The implementation aspects are analysed and the implementation methodology described. Finally, the forms of managing and funding this type of systems are analysed. (author)

  5. Analysis of lichens for use in biomonitoring of environmental pollution; Analise de liquens para uso na biomonitoracao da poluicao ambiental

    Energy Technology Data Exchange (ETDEWEB)

    Horimoto, Lidia K.; Saiki, Mitiko; Vasconcellos, Marina B.A. [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil). Supervisao de Radioquimica; Marcelli, Marcello P. [Instituto de Botanica, Sao Paulo, SP (Brazil). Secao de Micologia e Liquenologia

    2000-07-01

    This work presents the results of Al, As, Br, Ca, Cd, Cl, Co, Cs, Fe, K, Mg, Mn, Na, Rb, Se, Th, V and Zn obtained by instrumental neutron activation analysis in the analyses of epiphytic lichen samples collected in different sites of the States of Sao Paulo and Parana. These lichens were collected in the following sites: Cidade Universitaria, Campo Limpo Paulista, Sao Bernardo do Campo and Itanhaen situated in the State of Sao Paulo and one sample was from Vila Velha, Ponta Grossa of Parana State. The purpose of these analyses were to obtain preliminary information of air quality of these regions and also select a region of interest for biomonitoring studies. (author)

  6. Identification and analysis of the environmental management documentation related to the activities of environmental and chemical analysis laboratories; Identificacao e analise da documentacao pertinente a gestao ambiental relacionada as atividades de laboratorios de analises quimicas e ambientais

    Energy Technology Data Exchange (ETDEWEB)

    Otomo, Juliana Ikebe; Brandalise, Michele; Romano, Renato Lahos; Marques, Roberto; Szarota, Rosa Maria; Raduan, Rosane Napolitano; Salvetti, Tereza Cristina; Egute, Nayara dos Santos; Almeida, Josimar Ribeiro de; Aquino, Afonso Rodrigues de [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)], e-mail: araquino@ipen.br

    2009-08-15

    In the last years, many documents were elaborated by several countries and entities, concerning the environmental question. The implantation of and Environmental Management System requires specific documentation so that a company or laboratory can adjust themselves to the environmental quality. For laboratories of chemical, environmental analyses and also nuclear materials, the needs of attendance to the requirements of the following municipal, state and federal institutions were identified: Corpo de Bombeiros, CNEN - Comissao Nacional de Energia Nuclear, IBAMA - Instituto Brasileiro do Meio Ambiente e dos Recursos Renovaveis, ANVISA - Agencia Nacional de Vigilancia Sanitaria, PMSP - Prefeitura Municipal de Sao Paulo e a CETESB - Companhia Ambiental do Estado de Sao Paulo. (author)

  7. NOAA's National Snow Analyses

    Science.gov (United States)

    Carroll, T. R.; Cline, D. W.; Olheiser, C. M.; Rost, A. A.; Nilsson, A. O.; Fall, G. M.; Li, L.; Bovitz, C. T.

    2005-12-01

    NOAA's National Operational Hydrologic Remote Sensing Center (NOHRSC) routinely ingests all of the electronically available, real-time, ground-based, snow data; airborne snow water equivalent data; satellite areal extent of snow cover information; and numerical weather prediction (NWP) model forcings for the coterminous U.S. The NWP model forcings are physically downscaled from their native 13 km2 spatial resolution to a 1 km2 resolution for the CONUS. The downscaled NWP forcings drive an energy-and-mass-balance snow accumulation and ablation model at a 1 km2 spatial resolution and at a 1 hour temporal resolution for the country. The ground-based, airborne, and satellite snow observations are assimilated into the snow model's simulated state variables using a Newtonian nudging technique. The principle advantages of the assimilation technique are: (1) approximate balance is maintained in the snow model, (2) physical processes are easily accommodated in the model, and (3) asynoptic data are incorporated at the appropriate times. The snow model is reinitialized with the assimilated snow observations to generate a variety of snow products that combine to form NOAA's NOHRSC National Snow Analyses (NSA). The NOHRSC NSA incorporate all of the available information necessary and available to produce a "best estimate" of real-time snow cover conditions at 1 km2 spatial resolution and 1 hour temporal resolution for the country. The NOHRSC NSA consist of a variety of daily, operational, products that characterize real-time snowpack conditions including: snow water equivalent, snow depth, surface and internal snowpack temperatures, surface and blowing snow sublimation, and snowmelt for the CONUS. The products are generated and distributed in a variety of formats including: interactive maps, time-series, alphanumeric products (e.g., mean areal snow water equivalent on a hydrologic basin-by-basin basis), text and map discussions, map animations, and quantitative gridded products

  8. Analysis of the opening model of the Brazilian upstream business; Analise da adequacao do modelo de E e P brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Canelas, Andre [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Planejamento Energetico]. E-mail: canelas@ppe.ufrj.br

    2004-07-01

    This paper analyses the institutional model adopted for the reform of the oil industry in Brazil, beginning with the approval of Law n. 9.478 by the Brazilian Parliament in 1997. The reform of the Brazilian oil industry took place in the context of the reforms of the world's national economies throughout the 1980's and 1990's. From this worldwide process of reform stemmed a huge increase in the international capital flow directed to long-run investment opportunities in the economic infrastructure sectors. The aim of this paper is to analyse both the regulatory model for the oil and gas upstream activities in Brazil and the bidding model adopted at Brazil's National Petroleum Agency's auctions for the acquisition of exploration areas. This paper is dedicated, in its entirety, to Prof. Carmen Alveal (in memoriam), whose knowledge, support, encouragement and friendship were, for me, the most important of all, professionally and morally. (author)

  9. Automatic digitization. Experience of magnum 8000 in automatic digitization in EA; Digitalizacion automatica. Experiencias obtenidas durante la utilizacion del sistema magnus 8000 para la digitalizacion automatica en EA

    Energy Technology Data Exchange (ETDEWEB)

    Munoz Garcia, M.

    1995-12-31

    The paper describes the life cycle to be followed for the automatic digitization of files containing rasterised (scanned) images for their conversion into vector files (processable using CAD tools). The main characteristics of each of the five phases: capture, cleaning, conversion, revision and post-processing, that form part of the life cycle, are described. Lastly, the paper gives a comparative analysis of the results obtained using the automatic digitization process and other more conventional methods. (Author)

  10. Exergoeconomic analysis and optimization of a model cogeneration system; Analise exergoeconomica e otimizacao de um modelo de sistema de cogeracao

    Energy Technology Data Exchange (ETDEWEB)

    Vieira, Leonardo S.R. [Centro de Pesquisas de Energia Eletrica, Rio de Janeiro, RJ (Brazil). Area de Conhecimento de Materiais e Mecanica]. E-mail: lsrv@cepel.br; Donatelli, Joao L.M. [Espirito Santo Univ., Vitoria, ES (Brazil). Dept. de Engenharia Mecanica]. E-mail: donatelli@lttc.com.ufrj.br; Cruz, Manuel E.C. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Dept. de Engenharia Mecanica]. E-mail: manuel@serv.com.ufrj.br

    2000-07-01

    In this paper we perform exergetic and exergoeconomic analyses, a mathematical optimization and an exergoeconomic optimization of a gas turbine-heat recovery boiler cogeneration system with fixed electricity and steam production rates. The exergy balance is calculated with the IPSE pro thermal system simulation program. In the exergetic analysis, exergy destruction rates, exergetic efficiencies and structural bond coefficients for each component are evaluated as functions of the decision variables of the optimization problem. In the exergoeconomic analysis the cost for each exergetic flow is determined through cost balance equations and additional auxiliary equations from cost partition criteria. Mathematical optimization is performed by the metric variable method (software EES - Engineering Equation Solver) and by the successive quadratic programming (IMSL library - Fortran Power Station). The exergoeconomic optimization is performed on the basis of the exergoeconomic variables. System optimization is also performed by evaluating the derivative of the objective function through finite differences. This paper concludes with a comparison between the four optimization techniques employed. (author)

  11. Structural analysis of expandable tubes for oil wells; Analise estrutural de tubos expansiveis para pocos de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Aguiar, Ana Carolina Caldas; Antoun Netto, Theodoro [Universidade Federal do Rio de Janeiro (Brazil)], e-mails: carolinaaguiar@lts.coppe.ufrj.br, tanetto@lts.coppe.ufrj.br

    2009-06-15

    Solid expandable tube technology has many advantages when compared to conventional well bores. The tube expansion in situ assists the development of reservoirs in many challenging scenarios facing the oil industry today, such as in the pre-salt layer, HPHT wells, deep reservoirs, or ultra-deep water. Furthermore, this procedure has good compatibility with directional and horizontal wells and facilitates side-track operations. Although tube expansion is an attractive approach, there is a necessity to better understand its influence on the tube mechanical strength. This study carried out tests and numerical analyses to determine the effect of parameters such as diameter-to-thickness ratio and expansion rate on the collapse resistance of expandable tubes. An experimental apparatus was designed and built to reproduce full-scale tube expansion. Three, 2-meter long specimens were expanded 10% of their original diameters and subjected to hydrostatic pressure inside a vessel until collapse. Three non-expanded tubes were also tested for comparison. At the same time, non-linear numerical models were developed using the finite element method. After calibration, they were used to further analyze the mechanical behavior of solid expandable tubes and the influence of expansion on their resistance to collapse. (author)

  12. The unconstitutionality of the environmental compensation: an analyse of the ADIn (Direct Action of Unconstitutionality) 3378; A inconstitucionalidade da compensacao ambiental: uma analise da ADIn (Acao Direta de Inconstitucionalidade) 3378

    Energy Technology Data Exchange (ETDEWEB)

    Reis, Marcio Monteiro; Masseli, Sandro [Siqueira Castro Advogados, Sao Paulo, SP (Brazil). Setor Regulatorio e Ambiental

    2008-07-01

    The following paper aims to analyze the judgment of a specific Direct Action of Unconstitutionality ('ADI') filed by the Brazilian National Industry Confederation regarding the constitutionality of environmental compensation fee as disposed by Law 9.985. Such ADI was also sponsored by the Brazilian Oil, Gas and Biofuels Institute ('IBP') as 'amicus curiae'. In light of this, an environmental compensation timeline will be presented in order to support its charging evolution. By doing this we will be in a position to balance economic development and environment. (author)

  13. Economic analyse of industrial production and electric energy consumption on a sugar-alcohol plant; Analise economica da producao industrial e do consumo de energia eletrica em uma usina sucro-alcooleira

    Energy Technology Data Exchange (ETDEWEB)

    Bini, Aderson

    1993-10-01

    Economic aspects of industrial production of sugar cane and automotive alcohol fuel, the relation between its production and electric energy consumption, electric energy costs to self generated electric power and concessionary supply, involved in plant production on Ribeirao Preto, SP, Brazil, are presented. Studies to verify the relationships between sugar and alcohol production with milling ours as well as sugar cane processed with sugar and alcohol produced are also discussed 27 refs., 12 figs., 38 tabs.

  14. Analyses of the use of natural gas in solar power plants (CSP) hybridization in the Sao Francisco Basin (BA); Analise do uso de gas natural na hibridizacao de plantas termosolares (CSP) na Bacia do Sao Francisco (BA)

    Energy Technology Data Exchange (ETDEWEB)

    Malagueta, Diego Cunha; Penafiel, Rafael Andres Soria; Szklo, Alexandre Salem; Dutra, Ricardo M.; Schaeffer, Roberto [Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE/UFRJ), RJ (Brazil)

    2012-07-01

    This study assessed the feasibility of Concentrated Solar Power plants (CSP) in Northeast, Brazil. It focused on parabolic trough solar power plants, which is the most mature CSP technology; and evaluated plants rated at 100 MWe, dry cooling systems (due to the low water availability in Northeast), and with and without hybridization based on natural gas (degree of hybridization varying from 25 to 75%). Hence, the capacity factor of the simulated plants hovered between 23 and 98%, according to the degree of hybridization and the choice of the thermodynamic cycle of the natural gas fueled thermal system: Rankine or combined cycle. The CSP plants were simulated at Bom Jesus da Lapa, in the semi-arid region of Bahia. Given the prospects for natural gas resources in the Sao Francisco Basin, different scenarios for the gas prices were tested. Moreover, two scenarios were tested for the cost of the CSP plants, one based on the current financial environment and the other based on incentive policies, such as fiscal incentives and loans. Findings show that while simple plants levelized costs (LCOE) hovered around 520 R$/MWh, for hybrid plants LCOE may reach 140 to 190 R$/MWh. Therefore, this study proposed incentive policies to promote the increasing investment in hybrid CSP plants. (author)

  15. Retoriek, retoriese analise en prediking

    Directory of Open Access Journals (Sweden)

    A. B. du Toit

    1992-06-01

    Full Text Available In characterising rhetoric, its persuasive intent should be highlighted because the persuasive element is true of all three rhetorical genera. Graeco-Roman pupils were well-trained in the rhetorical arts and it can be accepted that Paul also had a working knowledge of rhetoric. Rhetorical analysis of the New Testament attempts to study the texts of the New Testament in the light of rhetorical features, as developed by the classical theorists and refined by a modern scholar like Perelman. Since the 1970's rhetorical analysis of the New Testament has flourished, although approaches have varied considerably and not all efforts were convincing. Nevertheless, it has become clear that the rhetorical approach can enrich our understanding of the New Testament, and especially of its letters, considerably. Examples from Romans and Galatians are presented to underscore this point. Since preaching, like rhetoric, aims at convincing and persuading an audience, rhetoric can provide us with important stimuli for the praxis of preaching, as can be demonstrated from the five prescribed phases of preparing a public speech, as well as from the three modes of persuasion: logos, ethos and pathos.

  16. Sample preparation in foodomic analyses.

    Science.gov (United States)

    Martinović, Tamara; Šrajer Gajdošik, Martina; Josić, Djuro

    2018-04-16

    Representative sampling and adequate sample preparation are key factors for successful performance of further steps in foodomic analyses, as well as for correct data interpretation. Incorrect sampling and improper sample preparation can be sources of severe bias in foodomic analyses. It is well known that both wrong sampling and sample treatment cannot be corrected anymore. These, in the past frequently neglected facts, are now taken into consideration, and the progress in sampling and sample preparation in foodomics is reviewed here. We report the use of highly sophisticated instruments for both high-performance and high-throughput analyses, as well as miniaturization and the use of laboratory robotics in metabolomics, proteomics, peptidomics and genomics. This article is protected by copyright. All rights reserved. This article is protected by copyright. All rights reserved.

  17. National automatic network of environmental radiological monitoring (RENAMORA); Red Nacional automatica de monitoreo radiologico ambiental (RENAMORA)

    Energy Technology Data Exchange (ETDEWEB)

    Gonzalez M, J.L.; Sanchez H, L. [CNSNS, Dr. Barragan 779, Col. Narvarte, 03020 Mexico D.F. (Mexico)]. e-mail: jlgonzalez@cnsns.gob.mx

    2003-07-01

    Inside the programs of Environmental Radiological Surveillance that it carries out the National Commission of Nuclear Security and Safeguards (CNSNS), it develops an National Automatic Network of Environmental Radiological Monitoring (RENAMORA), where it is carried out a registration of speed of environmental dose in continuous and simultaneous forms with the same moment of the measurement. This net allows to account with the meticulous and opportune information that will help to characterize, in dynamics form, the radiological conditions of diverse geographical zones of the country, including the sites that by normative require bigger surveillance, like its are the Laguna Verde Nuclear power station (CNLV), the Nuclear Center of Mexico (ININ) and the Radioactive waste storage center (CADER). This net is in its first development stage; three points inside the state of Veracruz, in the surroundings of the CNLV, already its are operating; the obtained data of rapidity of environmental dose are being stored in a database inside a primary data center located in the facilities of the CNSNS in Mexico city and its will be analyzed according to the project advances. At the moment, its are installing the first ten teams corresponding to the first phase of the RENAMORA (three stages); its are carried out operation tests, transmission, reception and administration of data. The obtained data will be interpreted, analyzed and inter compared to evaluate the risk levels to that it would be hold the population and to determine thresholds that allow to integrate the alarm systems that its had considered for emergency situations. (Author)

  18. Automatic inspection Pads second generation; Inspeccion automatica de pastillas de segunda generacion

    Energy Technology Data Exchange (ETDEWEB)

    Gallardo-Lancho gonzalez, J. F.

    2010-07-01

    In recent years, development has addressed Enusa a second generation robot for automatic inspection of tablets incorporating the following advances: more advanced systems that improve vision quality inspection equipment, conducting the inspection in line with the grinding operation, increased productivity of the inspection process to be unnecessary pills buildup in trays and lay-out of the most rational equipment allowing cleaning it easier and faster. This second generation machine is already part of the automatic inspection equipment developed by Enusa and is an example of the ongoing commitment to the development Enusa and innovation in nuclear technology.

  19. Descriptive Analyses of Mechanical Systems

    DEFF Research Database (Denmark)

    Andreasen, Mogens Myrup; Hansen, Claus Thorp

    2003-01-01

    Forord Produktanalyse og teknologianalyse kan gennmføres med et bredt socio-teknisk sigte med henblik på at forstå kulturelle, sociologiske, designmæssige, forretningsmæssige og mange andre forhold. Et delområde heri er systemisk analyse og beskrivelse af produkter og systemer. Nærværende kompend...

  20. Analysing and Comparing Encodability Criteria

    Directory of Open Access Journals (Sweden)

    Kirstin Peters

    2015-08-01

    Full Text Available Encodings or the proof of their absence are the main way to compare process calculi. To analyse the quality of encodings and to rule out trivial or meaningless encodings, they are augmented with quality criteria. There exists a bunch of different criteria and different variants of criteria in order to reason in different settings. This leads to incomparable results. Moreover it is not always clear whether the criteria used to obtain a result in a particular setting do indeed fit to this setting. We show how to formally reason about and compare encodability criteria by mapping them on requirements on a relation between source and target terms that is induced by the encoding function. In particular we analyse the common criteria full abstraction, operational correspondence, divergence reflection, success sensitiveness, and respect of barbs; e.g. we analyse the exact nature of the simulation relation (coupled simulation versus bisimulation that is induced by different variants of operational correspondence. This way we reduce the problem of analysing or comparing encodability criteria to the better understood problem of comparing relations on processes.

  1. Analysing Children's Drawings: Applied Imagination

    Science.gov (United States)

    Bland, Derek

    2012-01-01

    This article centres on a research project in which freehand drawings provided a richly creative and colourful data source of children's imagined, ideal learning environments. Issues concerning the analysis of the visual data are discussed, in particular, how imaginative content was analysed and how the analytical process was dependent on an…

  2. Impact analyses after pipe rupture

    International Nuclear Information System (INIS)

    Chun, R.C.; Chuang, T.Y.

    1983-01-01

    Two of the French pipe whip experiments are reproduced with the computer code WIPS. The WIPS results are in good agreement with the experimental data and the French computer code TEDEL. This justifies the use of its pipe element in conjunction with its U-bar element in a simplified method of impact analyses

  3. Millifluidic droplet analyser for microbiology

    NARCIS (Netherlands)

    Baraban, L.; Bertholle, F.; Salverda, M.L.M.; Bremond, N.; Panizza, P.; Baudry, J.; Visser, de J.A.G.M.; Bibette, J.

    2011-01-01

    We present a novel millifluidic droplet analyser (MDA) for precisely monitoring the dynamics of microbial populations over multiple generations in numerous (=103) aqueous emulsion droplets (100 nL). As a first application, we measure the growth rate of a bacterial strain and determine the minimal

  4. Analyser of sweeping electron beam

    International Nuclear Information System (INIS)

    Strasser, A.

    1993-01-01

    The electron beam analyser has an array of conductors that can be positioned in the field of the sweeping beam, an electronic signal treatment system for the analysis of the signals generated in the conductors by the incident electrons and a display for the different characteristics of the electron beam

  5. Workload analyse of assembling process

    Science.gov (United States)

    Ghenghea, L. D.

    2015-11-01

    The workload is the most important indicator for managers responsible of industrial technological processes no matter if these are automated, mechanized or simply manual in each case, machines or workers will be in the focus of workload measurements. The paper deals with workload analyses made to a most part manual assembling technology for roller bearings assembling process, executed in a big company, with integrated bearings manufacturing processes. In this analyses the delay sample technique have been used to identify and divide all bearing assemblers activities, to get information about time parts from 480 minutes day work time that workers allow to each activity. The developed study shows some ways to increase the process productivity without supplementary investments and also indicated the process automation could be the solution to gain maximum productivity.

  6. Mitogenomic analyses from ancient DNA

    DEFF Research Database (Denmark)

    Paijmans, Johanna L. A.; Gilbert, Tom; Hofreiter, Michael

    2013-01-01

    The analysis of ancient DNA is playing an increasingly important role in conservation genetic, phylogenetic and population genetic analyses, as it allows incorporating extinct species into DNA sequence trees and adds time depth to population genetics studies. For many years, these types of DNA...... analyses (whether using modern or ancient DNA) were largely restricted to the analysis of short fragments of the mitochondrial genome. However, due to many technological advances during the past decade, a growing number of studies have explored the power of complete mitochondrial genome sequences...... yielded major progress with regard to both the phylogenetic positions of extinct species, as well as resolving population genetics questions in both extinct and extant species....

  7. Recriticality analyses for CAPRA cores

    International Nuclear Information System (INIS)

    Maschek, W.; Thiem, D.

    1995-01-01

    The first scoping calculation performed show that the energetics levels from recriticalities in CAPRA cores are in the same range as in conventional cores. However, considerable uncertainties exist and further analyses are necessary. Additional investigations are performed for the separation scenarios of fuel/steel/inert and matrix material as a large influence of these processes on possible ramp rates and kinetics parameters was detected in the calculations. (orig./HP)

  8. Recriticality analyses for CAPRA cores

    Energy Technology Data Exchange (ETDEWEB)

    Maschek, W.; Thiem, D.

    1995-08-01

    The first scoping calculation performed show that the energetics levels from recriticalities in CAPRA cores are in the same range as in conventional cores. However, considerable uncertainties exist and further analyses are necessary. Additional investigations are performed for the separation scenarios of fuel/steel/inert and matrix material as a large influence of these processes on possible ramp rates and kinetics parameters was detected in the calculations. (orig./HP)

  9. Technical center for transportation analyses

    International Nuclear Information System (INIS)

    Foley, J.T.

    1978-01-01

    A description is presented of an information search/retrieval/research activity of Sandia Laboratories which provides technical environmental information which may be used in transportation risk analyses, environmental impact statements, development of design and test criteria for packaging of energy materials, and transportation mode research studies. General activities described are: (1) history of center development; (2) environmental information storage/retrieval system; (3) information searches; (4) data needs identification; and (5) field data acquisition system and applications

  10. Methodology of cost benefit analyses

    International Nuclear Information System (INIS)

    Patrik, M.; Babic, P.

    2000-10-01

    The report addresses financial aspects of proposed investments and other steps which are intended to contribute to nuclear safety. The aim is to provide introductory insight into the procedures and potential of cost-benefit analyses as a routine guide when making decisions on costly provisions as one of the tools to assess whether a particular provision is reasonable. The topic is applied to the nuclear power sector. (P.A.)

  11. Chapter No.4. Safety analyses

    International Nuclear Information System (INIS)

    2002-01-01

    In 2001 the activity in the field of safety analyses was focused on verification of the safety analyses reports for NPP V-2 Bohunice and NPP Mochovce concerning the new profiled fuel and probabilistic safety assessment study for NPP Mochovce. The calculation safety analyses were performed and expert reviews for the internal UJD needs were elaborated. An important part of work was performed also in solving of scientific and technical tasks appointed within bilateral projects of co-operation between UJD and its international partnership organisations as well as within international projects ordered and financed by the European Commission. All these activities served as an independent support for UJD in its deterministic and probabilistic safety assessment of nuclear installations. A special attention was paid to a review of probabilistic safety assessment study of level 1 for NPP Mochovce. The probabilistic safety analysis of NPP related to the full power operation was elaborated in the study and a contribution of the technical and operational improvements to the risk decreasing was quantified. A core damage frequency of the reactor was calculated and the dominant initiating events and accident sequences with the major contribution to the risk were determined. The target of the review was to determine the acceptance of the sources of input information, assumptions, models, data, analyses and obtained results, so that the probabilistic model could give a real picture of the NPP. The review of the study was performed in co-operation of UJD with the IAEA (IPSART mission) as well as with other external organisations, which were not involved in the elaboration of the reviewed document and probabilistic model of NPP. The review was made in accordance with the IAEA guidelines and methodical documents of UJD and US NRC. In the field of calculation safety analyses the UJD activity was focused on the analysis of an operational event, analyses of the selected accident scenarios

  12. Analysing the Wrongness of Killing

    DEFF Research Database (Denmark)

    Di Nucci, Ezio

    2014-01-01

    This article provides an in-depth analysis of the wrongness of killing by comparing different versions of three influential views: the traditional view that killing is always wrong; the liberal view that killing is wrong if and only if the victim does not want to be killed; and Don Marquis‟ future...... of value account of the wrongness of killing. In particular, I illustrate the advantages that a basic version of the liberal view and a basic version of the future of value account have over competing alternatives. Still, ultimately none of the views analysed here are satisfactory; but the different...

  13. Methodological challenges in carbohydrate analyses

    Directory of Open Access Journals (Sweden)

    Mary Beth Hall

    2007-07-01

    Full Text Available Carbohydrates can provide up to 80% of the dry matter in animal diets, yet their specific evaluation for research and diet formulation is only now becoming a focus in the animal sciences. Partitioning of dietary carbohydrates for nutritional purposes should reflect differences in digestion and fermentation characteristics and effects on animal performance. Key challenges to designating nutritionally important carbohydrate fractions include classifying the carbohydrates in terms of nutritional characteristics, and selecting analytical methods that describe the desired fraction. The relative lack of information on digestion characteristics of various carbohydrates and their interactions with other fractions in diets means that fractions will not soon be perfectly established. Developing a system of carbohydrate analysis that could be used across animal species could enhance the utility of analyses and amount of data we can obtain on dietary effects of carbohydrates. Based on quantities present in diets and apparent effects on animal performance, some nutritionally important classes of carbohydrates that may be valuable to measure include sugars, starch, fructans, insoluble fiber, and soluble fiber. Essential to selection of methods for these fractions is agreement on precisely what carbohydrates should be included in each. Each of these fractions has analyses that could potentially be used to measure them, but most of the available methods have weaknesses that must be evaluated to see if they are fatal and the assay is unusable, or if the assay still may be made workable. Factors we must consider as we seek to analyze carbohydrates to describe diets: Does the assay accurately measure the desired fraction? Is the assay for research, regulatory, or field use (affects considerations of acceptable costs and throughput? What are acceptable accuracy and variability of measures? Is the assay robust (enhances accuracy of values? For some carbohydrates, we

  14. Theorising and Analysing Academic Labour

    Directory of Open Access Journals (Sweden)

    Thomas Allmer

    2018-01-01

    Full Text Available The aim of this article is to contextualise universities historically within capitalism and to analyse academic labour and the deployment of digital media theoretically and critically. It argues that the post-war expansion of the university can be considered as medium and outcome of informational capitalism and as a dialectical development of social achievement and advanced commodification. The article strives to identify the class position of academic workers, introduces the distinction between academic work and labour, discusses the connection between academic, information and cultural work, and suggests a broad definition of university labour. It presents a theoretical model of working conditions that helps to systematically analyse the academic labour process and to provide an overview of working conditions at universities. The paper furthermore argues for the need to consider the development of education technologies as a dialectics of continuity and discontinuity, discusses the changing nature of the forces and relations of production, and the impact on the working conditions of academics in the digital university. Based on Erik Olin Wright’s inclusive approach of social transformation, the article concludes with the need to bring together anarchist, social democratic and revolutionary strategies for establishing a socialist university in a commons-based information society.

  15. CFD analyses in regulatory practice

    International Nuclear Information System (INIS)

    Bloemeling, F.; Pandazis, P.; Schaffrath, A.

    2012-01-01

    Numerical software is used in nuclear regulatory procedures for many problems in the fields of neutron physics, structural mechanics, thermal hydraulics etc. Among other things, the software is employed in dimensioning and designing systems and components and in simulating transients and accidents. In nuclear technology, analyses of this kind must meet strict requirements. Computational Fluid Dynamics (CFD) codes were developed for computing multidimensional flow processes of the type occurring in reactor cooling systems or in containments. Extensive experience has been accumulated by now in selected single-phase flow phenomena. At the present time, there is a need for development and validation with respect to the simulation of multi-phase and multi-component flows. As insufficient input by the user can lead to faulty results, the validity of the results and an assessment of uncertainties are guaranteed only through consistent application of so-called Best Practice Guidelines. The authors present the possibilities now available to CFD analyses in nuclear regulatory practice. This includes a discussion of the fundamental requirements to be met by numerical software, especially the demands upon computational analysis made by nuclear rules and regulations. In conclusion, 2 examples are presented of applications of CFD analysis to nuclear problems: Determining deboration in the condenser reflux mode of operation, and protection of the reactor pressure vessel (RPV) against brittle failure. (orig.)

  16. Methodology of analysis of competitive among energetics: the study of pellet case; Metodologia de analise de competitividade entre energeticos: o estudo de caso da pelotizacao

    Energy Technology Data Exchange (ETDEWEB)

    Nogueira, Larissa P.P. [Universidade Federal do Rio de Janeiro (PPE/COPPE/UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia. Programa de Planejamento Energetico], E-mail: larissappn@ppe.ufrj.br; Dutra, Luis E.D. [Universidade Federal do Rio de Janeiro (EQ/UFRJ), RJ (Brazil). Escola de Quimica], E-mail: ldutra@anp.gov.br; Oliveira, Ricardo G. [Empresa Pesquisa Energetica (EPE), Rio de Janeiro, RJ (Brazil)], E-mail: ricardo.gorini@epe.gov.br

    2010-07-01

    This paper proposes a new methodology for the revision of energy matrix of a industrial purpose enterprise, capable of structuring and aggregation of existent energy fluxes, and analyse the competitivity of alternatives for replacement among energetics.

  17. Spectroscopical analysis and molecular mechanics calculation of 8,9-Seco-lanostane; Analise espectroscopica e calculos de mecanica molecular de 8,9-seco-lanostanos

    Energy Technology Data Exchange (ETDEWEB)

    Rehder, Vera G; Fujiwara, Fred Y; Marsaioli, Anita J [Universidade Estadual de Campinas, SP (Brazil). Inst. de Quimica

    1992-12-31

    8.9-Seco-lanostane derivatives have been synthesized visualizing their application as intermediates in chiral building block syntheses and we are here presenting their spectroscopy analyses and MM2 molecular mechanic calculations. (author) 5 refs., 4 figs.

  18. Brief analysis of the energy matrix in the state of Mato Grosso and the mesoregions; Analise sucinta das matrizes energeticas de Mato Grosso e suas mesorregioes

    Energy Technology Data Exchange (ETDEWEB)

    Canavarros, Otacilio Borges; Ferreira, Noel Flavio Costa; Melo, Moises Candido de; Leite, Jose Ermete Rabello [Universidade Federal de Mato Grosso (UFMT), Cuiaba, MT (Brazil). Nucleo Interdisciplinar de Estudos em Planejamento]. E-mails: niepe@ufmt.br; niepe@pop.com.br

    2006-07-01

    The text presents relative energetic analyses to the Mato Grosso and its regions, with basis in presented matrices of offer and demand in the document - BEEMT 2004 - Mato Grosso Energetic Balance and Regions - period 1995 a 2003. The analyses were made leading in account two average taxes of annual growth in 1999/2003 periods 1995/2003 and, respectively, objectifying one better understanding of the evolution of the behavior of the energy ones in the State. (author)

  19. Severe accident recriticality analyses (SARA)

    DEFF Research Database (Denmark)

    Frid, W.; Højerup, C.F.; Lindholm, I.

    2001-01-01

    with all three codes. The core initial and boundary conditions prior to recriticality have been studied with the severe accident codes SCDAP/RELAP5, MELCOR and MAAP4. The results of the analyses show that all three codes predict recriticality-both super-prompt power bursts and quasi steady-state power......Recriticality in a BWR during reflooding of an overheated partly degraded core, i.e. with relocated control rods, has been studied for a total loss of electric power accident scenario. In order to assess the impact of recriticality on reactor safety, including accident management strategies......, which results in large energy deposition in the fuel during power burst in some accident scenarios. The highest value, 418 cal g(-1), was obtained with SIMULATE-3K for an Oskarshamn 3 case with reflooding rate of 2000 kg s(-1). In most cases, however, the predicted energy deposition was smaller, below...

  20. Hydrogen Analyses in the EPR

    International Nuclear Information System (INIS)

    Worapittayaporn, S.; Eyink, J.; Movahed, M.

    2008-01-01

    In severe accidents with core melting large amounts of hydrogen may be released into the containment. The EPR provides a combustible gas control system to prevent hydrogen combustion modes with the potential to challenge the containment integrity due to excessive pressure and temperature loads. This paper outlines the approach for the verification of the effectiveness and efficiency of this system. Specifically, the justification is a multi-step approach. It involves the deployment of integral codes, lumped parameter containment codes and CFD codes and the use of the sigma criterion, which provides the link to the broad experimental data base for flame acceleration (FA) and deflagration to detonation transition (DDT). The procedure is illustrated with an example. The performed analyses show that hydrogen combustion at any time does not lead to pressure or temperature loads that threaten the containment integrity of the EPR. (authors)

  1. Uncertainty and Sensitivity Analyses Plan

    International Nuclear Information System (INIS)

    Simpson, J.C.; Ramsdell, J.V. Jr.

    1993-04-01

    Hanford Environmental Dose Reconstruction (HEDR) Project staff are developing mathematical models to be used to estimate the radiation dose that individuals may have received as a result of emissions since 1944 from the US Department of Energy's (DOE) Hanford Site near Richland, Washington. An uncertainty and sensitivity analyses plan is essential to understand and interpret the predictions from these mathematical models. This is especially true in the case of the HEDR models where the values of many parameters are unknown. This plan gives a thorough documentation of the uncertainty and hierarchical sensitivity analysis methods recommended for use on all HEDR mathematical models. The documentation includes both technical definitions and examples. In addition, an extensive demonstration of the uncertainty and sensitivity analysis process is provided using actual results from the Hanford Environmental Dose Reconstruction Integrated Codes (HEDRIC). This demonstration shows how the approaches used in the recommended plan can be adapted for all dose predictions in the HEDR Project

  2. The hemispherical deflector analyser revisited

    Energy Technology Data Exchange (ETDEWEB)

    Benis, E.P. [Institute of Electronic Structure and Laser, P.O. Box 1385, 71110 Heraklion, Crete (Greece)], E-mail: benis@iesl.forth.gr; Zouros, T.J.M. [Institute of Electronic Structure and Laser, P.O. Box 1385, 71110 Heraklion, Crete (Greece); Department of Physics, University of Crete, P.O. Box 2208, 71003 Heraklion, Crete (Greece)

    2008-04-15

    Using the basic spectrometer trajectory equation for motion in an ideal 1/r potential derived in Eq. (101) of part I [T.J.M. Zouros, E.P. Benis, J. Electron Spectrosc. Relat. Phenom. 125 (2002) 221], the operational characteristics of a hemispherical deflector analyser (HDA) such as dispersion, energy resolution, energy calibration, input lens magnification and energy acceptance window are investigated from first principles. These characteristics are studied as a function of the entry point R{sub 0} and the nominal value of the potential V(R{sub 0}) at entry. Electron-optics simulations and actual laboratory measurements are compared to our theoretical results for an ideal biased paracentric HDA using a four-element zoom lens and a two-dimensional position sensitive detector (2D-PSD). These results should be of particular interest to users of modern HDAs utilizing a PSD.

  3. The hemispherical deflector analyser revisited

    International Nuclear Information System (INIS)

    Benis, E.P.; Zouros, T.J.M.

    2008-01-01

    Using the basic spectrometer trajectory equation for motion in an ideal 1/r potential derived in Eq. (101) of part I [T.J.M. Zouros, E.P. Benis, J. Electron Spectrosc. Relat. Phenom. 125 (2002) 221], the operational characteristics of a hemispherical deflector analyser (HDA) such as dispersion, energy resolution, energy calibration, input lens magnification and energy acceptance window are investigated from first principles. These characteristics are studied as a function of the entry point R 0 and the nominal value of the potential V(R 0 ) at entry. Electron-optics simulations and actual laboratory measurements are compared to our theoretical results for an ideal biased paracentric HDA using a four-element zoom lens and a two-dimensional position sensitive detector (2D-PSD). These results should be of particular interest to users of modern HDAs utilizing a PSD

  4. Analysing Protocol Stacks for Services

    DEFF Research Database (Denmark)

    Gao, Han; Nielson, Flemming; Nielson, Hanne Riis

    2011-01-01

    We show an approach, CaPiTo, to model service-oriented applications using process algebras such that, on the one hand, we can achieve a certain level of abstraction without being overwhelmed by the underlying implementation details and, on the other hand, we respect the concrete industrial...... standards used for implementing the service-oriented applications. By doing so, we will be able to not only reason about applications at different levels of abstractions, but also to build a bridge between the views of researchers on formal methods and developers in industry. We apply our approach...... to the financial case study taken from Chapter 0-3. Finally, we develop a static analysis to analyse the security properties as they emerge at the level of concrete industrial protocols....

  5. Analysing performance through value creation

    Directory of Open Access Journals (Sweden)

    Adrian TRIFAN

    2015-12-01

    Full Text Available This paper draws a parallel between measuring financial performance in 2 variants: the first one using data offered by accounting, which lays emphasis on maximizing profit, and the second one which aims to create value. The traditional approach to performance is based on some indicators from accounting data: ROI, ROE, EPS. The traditional management, based on analysing the data from accounting, has shown its limits, and a new approach is needed, based on creating value. The evaluation of value based performance tries to avoid the errors due to accounting data, by using other specific indicators: EVA, MVA, TSR, CVA. The main objective is shifted from maximizing the income to maximizing the value created for shareholders. The theoretical part is accompanied by a practical analysis regarding the creation of value and an analysis of the main indicators which evaluate this concept.

  6. Proteins analysed as virtual knots

    Science.gov (United States)

    Alexander, Keith; Taylor, Alexander J.; Dennis, Mark R.

    2017-02-01

    Long, flexible physical filaments are naturally tangled and knotted, from macroscopic string down to long-chain molecules. The existence of knotting in a filament naturally affects its configuration and properties, and may be very stable or disappear rapidly under manipulation and interaction. Knotting has been previously identified in protein backbone chains, for which these mechanical constraints are of fundamental importance to their molecular functionality, despite their being open curves in which the knots are not mathematically well defined; knotting can only be identified by closing the termini of the chain somehow. We introduce a new method for resolving knotting in open curves using virtual knots, which are a wider class of topological objects that do not require a classical closure and so naturally capture the topological ambiguity inherent in open curves. We describe the results of analysing proteins in the Protein Data Bank by this new scheme, recovering and extending previous knotting results, and identifying topological interest in some new cases. The statistics of virtual knots in protein chains are compared with those of open random walks and Hamiltonian subchains on cubic lattices, identifying a regime of open curves in which the virtual knotting description is likely to be important.

  7. Digital image analyser for autoradiography

    International Nuclear Information System (INIS)

    Muth, R.A.; Plotnick, J.

    1985-01-01

    The most critical parameter in quantitative autoradiography for assay of tissue concentrations of tracers is the ability to obtain precise and accurate measurements of optical density of the images. Existing high precision systems for image analysis, rotating drum densitometers, are expensive, suffer from mechanical problems and are slow. More moderately priced and reliable video camera based systems are available, but their outputs generally do not have the uniformity and stability necessary for high resolution quantitative autoradiography. The authors have designed and constructed an image analyser optimized for quantitative single and multiple tracer autoradiography which the authors refer to as a memory-mapped charged-coupled device scanner (MM-CCD). The input is from a linear array of CCD's which is used to optically scan the autoradiograph. Images are digitized into 512 x 512 picture elements with 256 gray levels and the data is stored in buffer video memory in less than two seconds. Images can then be transferred to RAM memory by direct memory-mapping for further processing. Arterial blood curve data and optical density-calibrated standards data can be entered and the optical density images can be converted automatically to tracer concentration or functional images. In double tracer studies, images produced from both exposures can be stored and processed in RAM to yield ''pure'' individual tracer concentration or functional images. Any processed image can be transmitted back to the buffer memory to be viewed on a monitor and processed for region of interest analysis

  8. A case study on riser analysis of a drilling riser in deep waters; Estudo de caso: analises estruturais e hidrodinamicas de um riser de perfuracao em aguas profundas

    Energy Technology Data Exchange (ETDEWEB)

    Roveri, Francisco E.; Pestana, Rafael G. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas

    2008-07-01

    This paper presents a set of structural and hydrodynamic analyses of a connected marine riser, in 1900 meter water depth. Operating windows are determined for one year return period environmental conditions and for a set of drilling fluid weight density values. Parametric analyses are carried out to study the riser response sensitivity to variations in environmental conditions, drilling fluid weight density, upper and lower flex joint rotational stiffness and vessel motion phase angles. Current, drilling fluid weight density and vessel motion phase angle changes affect significantly the system response, whereas the response is not significantly affected by changes in wave height, wave period and flex joint rotational stiffness. (author)

  9. Severe Accident Recriticality Analyses (SARA)

    Energy Technology Data Exchange (ETDEWEB)

    Frid, W. [Swedish Nuclear Power Inspectorate, Stockholm (Sweden); Hoejerup, F. [Risoe National Lab. (Denmark); Lindholm, I.; Miettinen, J.; Puska, E.K. [VTT Energy, Helsinki (Finland); Nilsson, Lars [Studsvik Eco and Safety AB, Nykoeping (Sweden); Sjoevall, H. [Teoliisuuden Voima Oy (Finland)

    1999-11-01

    Recriticality in a BWR has been studied for a total loss of electric power accident scenario. In a BWR, the B{sub 4}C control rods would melt and relocate from the core before the fuel during core uncovery and heat-up. If electric power returns during this time-window unborated water from ECCS systems will start to reflood the partly control rod free core. Recriticality might take place for which the only mitigating mechanisms are the Doppler effect and void formation. In order to assess the impact of recriticality on reactor safety, including accident management measures, the following issues have been investigated in the SARA project: 1. the energy deposition in the fuel during super-prompt power burst, 2. the quasi steady-state reactor power following the initial power burst and 3. containment response to elevated quasi steady-state reactor power. The approach was to use three computer codes and to further develop and adapt them for the task. The codes were SIMULATE-3K, APROS and RECRIT. Recriticality analyses were carried out for a number of selected reflooding transients for the Oskarshamn 3 plant in Sweden with SIMULATE-3K and for the Olkiluoto 1 plant in Finland with all three codes. The core state initial and boundary conditions prior to recriticality have been studied with the severe accident codes SCDAP/RELAP5, MELCOR and MAAP4. The results of the analyses show that all three codes predict recriticality - both superprompt power bursts and quasi steady-state power generation - for the studied range of parameters, i. e. with core uncovery and heat-up to maximum core temperatures around 1800 K and water flow rates of 45 kg/s to 2000 kg/s injected into the downcomer. Since the recriticality takes place in a small fraction of the core the power densities are high which results in large energy deposition in the fuel during power burst in some accident scenarios. The highest value, 418 cal/g, was obtained with SIMULATE-3K for an Oskarshamn 3 case with reflooding

  10. Severe accident recriticality analyses (SARA)

    Energy Technology Data Exchange (ETDEWEB)

    Frid, W. E-mail: wiktor.frid@ski.se; Hoejerup, F.; Lindholm, I.; Miettinen, J.; Nilsson, L.; Puska, E.K.; Sjoevall, H

    2001-11-01

    Recriticality in a BWR during reflooding of an overheated partly degraded core, i.e. with relocated control rods, has been studied for a total loss of electric power accident scenario. In order to assess the impact of recriticality on reactor safety, including accident management strategies, the following issues have been investigated in the SARA project: (1) the energy deposition in the fuel during super-prompt power burst; (2) the quasi steady-state reactor power following the initial power burst; and (3) containment response to elevated quasi steady-state reactor power. The approach was to use three computer codes and to further develop and adapt them for the task. The codes were SIMULATE-3K, APROS and RECRIT. Recriticality analyses were carried out for a number of selected reflooding transients for the Oskarshamn 3 plant in Sweden with SIMULATE-3K and for the Olkiluoto 1 plant in Finland with all three codes. The core initial and boundary conditions prior to recriticality have been studied with the severe accident codes SCDAP/RELAP5, MELCOR and MAAP4. The results of the analyses show that all three codes predict recriticality--both super-prompt power bursts and quasi steady-state power generation--for the range of parameters studied, i.e. with core uncovering and heat-up to maximum core temperatures of approximately 1800 K, and water flow rates of 45-2000 kg s{sup -1} injected into the downcomer. Since recriticality takes place in a small fraction of the core, the power densities are high, which results in large energy deposition in the fuel during power burst in some accident scenarios. The highest value, 418 cal g{sup -1}, was obtained with SIMULATE-3K for an Oskarshamn 3 case with reflooding rate of 2000 kg s{sup -1}. In most cases, however, the predicted energy deposition was smaller, below the regulatory limits for fuel failure, but close to or above recently observed thresholds for fragmentation and dispersion of high burn-up fuel. The highest calculated

  11. Severe accident recriticality analyses (SARA)

    International Nuclear Information System (INIS)

    Frid, W.; Hoejerup, F.; Lindholm, I.; Miettinen, J.; Nilsson, L.; Puska, E.K.; Sjoevall, H.

    2001-01-01

    Recriticality in a BWR during reflooding of an overheated partly degraded core, i.e. with relocated control rods, has been studied for a total loss of electric power accident scenario. In order to assess the impact of recriticality on reactor safety, including accident management strategies, the following issues have been investigated in the SARA project: (1) the energy deposition in the fuel during super-prompt power burst; (2) the quasi steady-state reactor power following the initial power burst; and (3) containment response to elevated quasi steady-state reactor power. The approach was to use three computer codes and to further develop and adapt them for the task. The codes were SIMULATE-3K, APROS and RECRIT. Recriticality analyses were carried out for a number of selected reflooding transients for the Oskarshamn 3 plant in Sweden with SIMULATE-3K and for the Olkiluoto 1 plant in Finland with all three codes. The core initial and boundary conditions prior to recriticality have been studied with the severe accident codes SCDAP/RELAP5, MELCOR and MAAP4. The results of the analyses show that all three codes predict recriticality--both super-prompt power bursts and quasi steady-state power generation--for the range of parameters studied, i.e. with core uncovering and heat-up to maximum core temperatures of approximately 1800 K, and water flow rates of 45-2000 kg s -1 injected into the downcomer. Since recriticality takes place in a small fraction of the core, the power densities are high, which results in large energy deposition in the fuel during power burst in some accident scenarios. The highest value, 418 cal g -1 , was obtained with SIMULATE-3K for an Oskarshamn 3 case with reflooding rate of 2000 kg s -1 . In most cases, however, the predicted energy deposition was smaller, below the regulatory limits for fuel failure, but close to or above recently observed thresholds for fragmentation and dispersion of high burn-up fuel. The highest calculated quasi steady

  12. Severe Accident Recriticality Analyses (SARA)

    International Nuclear Information System (INIS)

    Frid, W.; Hoejerup, F.; Lindholm, I.; Miettinen, J.; Puska, E.K.; Nilsson, Lars; Sjoevall, H.

    1999-11-01

    Recriticality in a BWR has been studied for a total loss of electric power accident scenario. In a BWR, the B 4 C control rods would melt and relocate from the core before the fuel during core uncovery and heat-up. If electric power returns during this time-window unborated water from ECCS systems will start to reflood the partly control rod free core. Recriticality might take place for which the only mitigating mechanisms are the Doppler effect and void formation. In order to assess the impact of recriticality on reactor safety, including accident management measures, the following issues have been investigated in the SARA project: 1. the energy deposition in the fuel during super-prompt power burst, 2. the quasi steady-state reactor power following the initial power burst and 3. containment response to elevated quasi steady-state reactor power. The approach was to use three computer codes and to further develop and adapt them for the task. The codes were SIMULATE-3K, APROS and RECRIT. Recriticality analyses were carried out for a number of selected reflooding transients for the Oskarshamn 3 plant in Sweden with SIMULATE-3K and for the Olkiluoto 1 plant in Finland with all three codes. The core state initial and boundary conditions prior to recriticality have been studied with the severe accident codes SCDAP/RELAP5, MELCOR and MAAP4. The results of the analyses show that all three codes predict recriticality - both superprompt power bursts and quasi steady-state power generation - for the studied range of parameters, i. e. with core uncovery and heat-up to maximum core temperatures around 1800 K and water flow rates of 45 kg/s to 2000 kg/s injected into the downcomer. Since the recriticality takes place in a small fraction of the core the power densities are high which results in large energy deposition in the fuel during power burst in some accident scenarios. The highest value, 418 cal/g, was obtained with SIMULATE-3K for an Oskarshamn 3 case with reflooding

  13. Ceramic filters analysis for aluminium melting through microtomography technique; Analise de filtros ceramicos para fundicao de aluminio atraves da tecnica de microtomografia

    Energy Technology Data Exchange (ETDEWEB)

    Rocha, Henrique de Souza; Lopes, Ricardo Tadeu; Jesus, Edgar Francisco Oliveira de; Oliveira, Luis Fernando de [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE). Lab. de Instrumentacao Nuclear; Duhm, Rainer; Feiste, Karsten L.; Reichert, Christian; Reimche, Wilfried; Stegemann, Dieter [Universidade de Hannover (Germany). IKPH

    2000-07-01

    In this work a ceramic filters analysis is done through the microtomography for improvement of the aluminium melting process through the filter porosity control. Microtomography were obtained of ceramic filters with pore dimensions of 10, 20 and 30 ppi. The data were calculated by using an reconstruction algorithm for divergent beam implemented in the Nuclear Instrumentation Laboratory of COPPE/UFRJ and analysed through cells and windows separation according to the defined by Ray. For the analyses the Image Pro program were used where the cells have been detached by sphere inserted, adjusting by nine points, in the filter cavities. So, the size of the answer sphere were considered as the cell size. The windows were measured by straight lines secant to the window intersections.

  14. Pawnee Nation Energy Option Analyses

    Energy Technology Data Exchange (ETDEWEB)

    Matlock, M.; Kersey, K.; Riding In, C.

    2009-07-21

    Pawnee Nation of Oklahoma Energy Option Analyses In 2003, the Pawnee Nation leadership identified the need for the tribe to comprehensively address its energy issues. During a strategic energy planning workshop a general framework was laid out and the Pawnee Nation Energy Task Force was created to work toward further development of the tribe’s energy vision. The overarching goals of the “first steps” project were to identify the most appropriate focus for its strategic energy initiatives going forward, and to provide information necessary to take the next steps in pursuit of the “best fit” energy options. Description of Activities Performed The research team reviewed existing data pertaining to the availability of biomass (focusing on woody biomass, agricultural biomass/bio-energy crops, and methane capture), solar, wind and hydropower resources on the Pawnee-owned lands. Using these data, combined with assumptions about costs and revenue streams, the research team performed preliminary feasibility assessments for each resource category. The research team also reviewed available funding resources and made recommendations to Pawnee Nation highlighting those resources with the greatest potential for financially-viable development, both in the near-term and over a longer time horizon. Findings and Recommendations Due to a lack of financial incentives for renewable energy, particularly at the state level, combined mediocre renewable energy resources, renewable energy development opportunities are limited for Pawnee Nation. However, near-term potential exists for development of solar hot water at the gym, and an exterior wood-fired boiler system at the tribe’s main administrative building. Pawnee Nation should also explore options for developing LFGTE resources in collaboration with the City of Pawnee. Significant potential may also exist for development of bio-energy resources within the next decade. Pawnee Nation representatives should closely monitor

  15. Analysis of the entrepreneurial strategies for conversion to money the Bolivian natural gas reserves; Analise das estrategias empresariais para monetizacao das reservas de gas natural da Bolivia

    Energy Technology Data Exchange (ETDEWEB)

    Real, Rodrigo Valle; Gutierrez, Margarida; Almeida, Edmar de [Universidade Federal do Rio de Janeiro, RJ (Brazil). Inst. de Economia]. E-mail: rodreal@ig.com.br; margarida@ie.ufrj.br; edmar@ie.ufrj.br

    2002-07-01

    This paper analyses the recent evolution of the natural gas in Bolivia. During the last years the sector opening allowed the private investments increasing by international enterprises, and a great increasing of the reserves. The paper presents various alternatives for the commercialization of the produced gas in the market and consequently, allowing the enterprises detaining part of the reserves follow different strategies, in accordance with their positioning in the region their core business and the perspective for the market expansion.

  16. CT interpretation of craniofacial anomalies: a comparative analysis by undergraduate dental students; Interpretacao de anomalias craniofaciais em TC. Analise comparativa por alunos de graduacao em Odontologia

    Energy Technology Data Exchange (ETDEWEB)

    Gaia, Bruno Felipe; Perella, Andreia; Cara, Ana Claudia Ballet de [Sao Paulo Univ., SP (Brazil). Faculdade de Odontologia; Antunes, Jose Leopoldo Ferreira [Sao Paulo Univ., SP (Brazil). Faculdade de Odontologia. Dept. de Odontologia Social; Cavalcanti, Marcelo Gusmao Paraiso [Sao Paulo Univ., SP (Brazil). Faculdade de Odontologia. Dept. de Radiologia

    2005-01-15

    The aim of this study was to evaluate the accuracy and reproducibility of computed tomography (CT) image interpretation made in axial slices (2D-CT) and 3D reconstructed images (3D-CT) of patients with craniofacial anomalies. The analyses were made by undergraduate dental students, and compared with the diagnoses considered upon surgical intervention. Computed tomography of 43 patients were analyzed independently by three calibrated examiners (undergraduate students) with, respectively, one, two, and three semesters of experience in craniofacial CT training and interpretation. The analysis of 2D-CT and 3D-CT images were performed at distinct times using an independent workstation associated with a specific computer graphics software for volumetric images. The analysis of inter-examiner agreement and of the agreement between observers and the gold standard was performed using the Kappa test. The accuracy evaluation presented a progressively higher value for examiners with progressively broader experience in 2D-CT and 3D-CT image interpretation. 3D-CT analyses allowed a higher inter-examiner agreement (1 - 0.896) than 2D-CT analyses (1 - 0.614). 3D-CT was considered more precise and accurate than 2D-CT for all students' evaluations. The reproducibility and accuracy varied according to the experience in CT interpretation, and the most experienced student achieved results closer to the gold standard. (author)

  17. Comparative analysis of energy economy among different types of electric motor driving; Analise comparativa de economia de energia entre diferentes tipos de acionamento de motores electricos

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Marcelo Santos da; Oliveira, Carlos Henrique, e-mails: mcelo_sant@ig.com.br; caique1979@yahoo.com.br; Albuquerque, Carlos Jesivan Marques; Fortes, Marcio Zamboti [Universidade Severino Sombra (USS), Vassouras, RJ (Brazil)], e-mails: cjesivan@uss.br; mzamboti@uss.br

    2008-07-01

    The application of controlled drives loads of small power can cause undesirable disturbances for electrical installations, but it brings some benefits when comparing the energy consumption that this application has on its regular period of operation. This study analyses using comparatives, the electrical economy using the different types of drives for three phase electric induction motors of low voltage. Running up tests on the test bench didactic, the inverter drives, soft starter and contactor switch were analyzed for different loads (motor without load, 50% and 100% load), rating in S1 and S4. (author)

  18. Regulation of mature oil fields: a constitutional analysis; Regulacao de campos maduros de petroleo: uma analise a luz da Constituicao Federal de 1988

    Energy Technology Data Exchange (ETDEWEB)

    Siqueira, Mariana de; Xavier, Yanko Marcius de Alencar [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil)

    2008-07-01

    The oil activities in Brazil had been started in an intensive way by the years 30 and 40. During approximately 40 years only one agent had been executed the oil activities in this country: the PETROBRAS. Many of the fields explored in the past are nowadays in decline. These fields, not interesting for the majors, would be interesting for the small and medium enterprises. The present research analyses the mature oil fields and its regulation in Brazil, looking to the 'Constituicao Federal de 1988' and to the idea of social and economic development. (author)

  19. Simulation, optimization and analysis of cost of biodiesel plant pot route enzymatic; Simulacao, otimizacao e analise de custo de planta de biodiesel via rota enzimatica

    Energy Technology Data Exchange (ETDEWEB)

    Mendes, Jocelia S.; Ferreira, Andrea L.O. [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil); Silva, Giovanilton F. [Tecnologia Bioenergetica - Tecbio, Fortaleza, CE (Brazil)

    2008-07-01

    The aim of this work ware simulation, optimization and to find the biodiesel production cost produced by enzymatic route. Consequently, it was carried out a methodology of economic calculations and sensitivity analyses for this process. It was used a computational software from balance equations for obtaining the biodiesel cost. The economical analysis was obtained by capital cost of biofuel. The whole process was developed according analysis of fixed capital cost, total manufacturing cost, raw material cost, and chemical cost. The results of economic calculations to biodiesel production showed efficient. The model was meant for use in assessing the effects on estimated biodiesel production cost of changes in different types of oils. (author)

  20. Trace element determination in human bones using the neutron activation analysis method; Determinacao de elementos traco em ossos humanos pelo metodo de analise por ativacao com neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Kramarski, Sila; Saiki, Mitiko [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil); Borelli, Aurelio [Sao Paulo Univ., SP (Brazil). Faculdade de Medicina. Lab. de Nutricao Humana; Batalha, Joao R.F. [Universidade de Mogi das Cruzes, SP (Brazil). Faculdade de Medicina

    1997-10-01

    This work presents the results obtained in the analysis of rib bone samples from normal human individuals by applying instrumental neutron activation analysis. In these analyses, the elements Br, Cl, Fe, K, Mg, Na, Rb, Sr and Zn were found at the ppm level and the elements Ca and P at the level of percentage. The precision and the of the results were evaluated by using biological reference materials NIST SRM 1577a Bovine Liver, IAEA A-11 Milk powder, NIES CRM 9 Sargasso e NIES CRM 10A Rice Flour Unpolished. (author). 5 refs., 3 tabs.

  1. Analysis of technological options for electric energy generation from urban solid wastes; Analise de opcoes tecnologicas para geracao de energia eletrica a partir de residuos solidos urbanos

    Energy Technology Data Exchange (ETDEWEB)

    Furtado, J.G. de M.; Serra, E.T. [Centro de Pesquisas de Energia Eletrica (CEPEL), Rio de Janeiro, RJ (Brazil)], Emails: furtado@cepel.br, etserra@cepel.br

    2010-07-01

    This paper evaluates technologically of the options existents for generation of electric power from the urban solid wastes (USW), based on application of factoring method for estimation of investments based on basic description of the plant, it main equipment and technological complexity, viewing to contribute for determination of better technical and economical form, and the energy using. The results of the effectuated analyses indicates that the most technological complexity of the gasification and thermal plasma, and be encountered on non commercial in great scale as well, make the the option present the greatest index of investment and relative cost, determining the greatest costs of electric power generated through this process.

  2. Improving word coverage using unsupervised morphological analyser

    Indian Academy of Sciences (India)

    To enable a computer to process information in human languages, ... vised morphological analyser (UMA) would learn how to analyse a language just by looking ... result for English, but they did remarkably worse for Finnish and Turkish.

  3. Techniques for Analysing Problems in Engineering Projects

    DEFF Research Database (Denmark)

    Thorsteinsson, Uffe

    1998-01-01

    Description of how CPM network can be used for analysing complex problems in engineering projects.......Description of how CPM network can be used for analysing complex problems in engineering projects....

  4. Analysis of Angola as a new OPEC member (2007) for the world oil market; Analise da entrada de Angola na OPEC (2007) para o mercado mundial do petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, Ana Paula Alves S.L.; Almeida, Gabriela Gomes de [Universidade Vila Velha, ES (Brazil). Curso de Relacoes Internacionais; Samarco Mineracao S.A., Belo Horizonte, MG (Brazil)], e-mail: anapaula_aslg@hotmail.com, e-mail: gabiptu@hotmail.com

    2008-07-01

    Angola is in the spot light lately as one of the major oil producers in the world, being the second largest oil producer in Africa. Therefore, in 2007, this country became a member of OPEC which brought to table several speculations concerning Angola's position facing the pressures and demands of an international organization. This article comes to analyse Angola's possible strategies when it comes to defending its economic interests and its participation in the price politics implemented by OPEC. All hypotheses considered in this article are analysed according to the Complex Interdependence Theory (Keohane and Nye). This International Affairs Theory is defined by a mutual and multilateral dependence between the nations. This way, we may conclude that even though Angola has a history of non fulfilling its agreements, the cooperation is made necessary because it is the most benefice alternative. The tendency is that when Angola starts fulfilling its quotas on the oil matter it will receive cooperation from OPEC and other nations in other areas where this country needs assistance. (author)

  5. Analysis of human enamel and dentine by neutron activation analysis; Analise de esmalte e dentina de humanos pelo metodo de ativacao com neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Marco A.B. [Sao Paulo Univ., SP (Brazil). Inst. de Quimica]. E-mail: vankfire@gmail.com; Adachi, Eduardo M.; Saiki, Mitiko [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    2005-07-01

    Determination of trace elements in dental tissues has been of great interest to study the correlation between element composition and caries as well as food habits of individuals. In the present study dentine and enamel samples from healthy individuals were analysed by neutron activation analysis. The teeth were provided form dental clinics, and they were previously washed using purified water and acetone. Then they were dried at 40 deg C and ground in a agate mortar. The samples and element standards were irradiated with thermal neutrons at the IEA-R1 nuclear reactor. Long irradiations of 8 h under thermal neutron flux of 5x10{sup 12} n cm{sup -2} s{sup -1} were used for Ca, Na, Sr and Zn determinations. In short irradiations of 15 s and under neutron flux of 10{sup 12} n cm{sup -2} s{sup -1} the elements Mg, Mn, Na e Sr were determined. The induced gamma activities of the samples and standards were measured using a hyperpure Ge detector coupled to a gamma ray spectrometer. Elemental concentrations were calculated by comparative method. Results obtained showed that Ca, Mg and Na are present in both tissues at the level of percentages and the elements Mn, Sr and Zn at the {mu}g g{sup -1} levels. For quality control of the results the certified reference materials NIST 1400 Bone Ash and NIST 1486 Bone Meal were analysed. (author)

  6. Inspection of the brazilian nuclear regulatory body in the area of radiotherapy. A critical analysis; Inspecao do orgao regulador nuclear brasileiro na area de radioterapia. Uma analise critica

    Energy Technology Data Exchange (ETDEWEB)

    Brito, Ricardo Roberto de Azevedo

    2005-07-01

    The National Commission of Nuclear Energy (CNEN) is responsible in Brazil for the activities of licensing and control of radioactive installations in the radiotherapy medical area. The majority of these activities are developed by CNEN Co-ordination of Radioactive Installations (CORAD). One of the necessary stages for the development of licensing and control activities is the inspection of radiotherapy services (clinics and hospitals). Almost all of these inspections are carried out by CNEN Inst. of Radiation Protection and Dosimetry (IRD), through its Service of Medical Physics in Radiotherapy and Nuclear Medicine (SEFME). This work makes a survey of the main nonconformities found during ten years of inspections in radiotherapy services (1995 - 2004) and analyses the efficiency of these inspections in making the radiotherapy services develop their activities according to the norms in vigour in the country and adopt corrective actions against, at least, the nonconformities evidenced by CNEN inspectors. Additionally, it analyses the possibility of improvement and / or the optimisation of the process, through a procedure able to be unified and controlled, aiming a prompt communication to those involved in the licensing process (SEFME and CORAD) about the attendance by the radiotherapy services to the non-conformity items observed during the inspection. (author)

  7. Automatic incrementalization of Prolog based static analyses

    DEFF Research Database (Denmark)

    Eichberg, Michael; Kahl, Matthias; Saha, Diptikalyan

    2007-01-01

    Modem development environments integrate various static analyses into the build process. Analyses that analyze the whole project whenever the project changes are impractical in this context. We present an approach to automatic incrementalization of analyses that are specified as tabled logic prog...

  8. Analysis of medicinal plant extracts by neutron activation method; Analise de extratos de plantas medicinais pelo metodo de ativacao com neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Vaz, Sandra Muntz

    1996-12-31

    This dissertation has presented the results from analysis of medicinal plant extracts using neutron activation method. Instrumental neutron activation analysis was applied to the determination of the elements Al, Br, Ca, Ce, Cl, Cr, Cs, Fe, K, La, Mg, Mn, Na, Rb, Sb, Sc and Zn in medicinal extracts obtained from Achyrolcline satureoides DC, Casearia sylvestris, Centella asiatica, Citrus aurantium L., Solano lycocarpum, Solidago microglossa, Stryphnondedron barbatiman and Zingiber officinale R. plants. The elements Hg and Se were determined using radiochemical separation by means of retention of Se in HMD inorganic exchanger and solvent extraction of Hg by bismuth diethyl-dithiocarbamate solution. Precision and accuracy of the results have been evaluated by analysing reference materials. The therapeutic action of some elements found in plant extracts analyzed was briefly discussed 70 refs., 13 figs., 15 tabs

  9. Comparative analysis of cost benefit division methodologies in a hydrothermal generation system; Analise comparativa de metodologias de reparticao de custos e beneficios num sistema de geracao hidrotermico

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, M V.F. [Pontificia Univ. Catolica do Rio de Janeiro, RJ (Brazil); Gorenstin, B G; Campodonico, N M; Costa, J.P. da; Kelman, J [Centro de Pesquisas de Energia Eletrica, Rio de Janeiro, RJ (Brazil)

    1990-12-31

    The development and operation planning of the Brazilian generation system has been realized in a coordinate way by several years, due to some organizations, where the main generating companies from the country take part. The benefit share of the system to each participant of the planning and integrated operation has aroused interest. This paper describes the alternate forms of cost benefit allocation, between the participant companies of a coordinate operation, in order to reach an adequateness of remuneration and incentives. It was analysed two proposal of benefit allocation for energy export/import contracts: share by generation value and share by marginal benefit, concluding that the second one represents the best way of contribution for the several factors that comprising a hydroelectric power plant (storage capacity, effective storage and turbine capacity). (C.G.C.). 1 tab.

  10. Failure data specialization in quantitative risk assessments of process plants; Especializacao de dados de falha em analise quantitativa de riscos de plantas de processo

    Energy Technology Data Exchange (ETDEWEB)

    Ribeiro, Antonio C.O. [Bayer S.A., Sao Paulo, SP (Brazil); Melo, P.F. Frutuoso e [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia

    2005-07-01

    The aim of this paper is to show the Bayesian inference in reliability studies, which are used to failures rates updating in safety analyses. It is developed the impact of its using in quantitative risks assessments for industrial process plants. With this approach we find a structured and auditable way of showing the difference between an industrial installation with a good project and maintenance structure from another one that shows a low level of quality in these areas. In general the evidence from failures rates and as follow the frequency of occurrence from scenarios, which the risks taken in account in ERA, are taken from generics data banks, instead of, the installation in analysis. When using the plant data we need special effort to develop a data bank, that is, a maintenance managing system, which allows the data insertion as for example the SAP{sup R} and its PM module. (author)

  11. Analysis of ferritic stainless steel tube applied in radiation furnaces; Analise de tubos de aco inoxidavel ferritico para aplicacao em fornos de radiacao

    Energy Technology Data Exchange (ETDEWEB)

    Porto, P.C.R.; Spim, J.A. [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Centro de Tecnologia. Lab. de Fundicao], e-mail: spim@ufrgs.br; Santos, C.A. [Pontificia Universidade Catolica do Rio Grande do Sul (PUC-RS), Porto Alegre, RS (Brazil). Fac. de Engenharia. Programa de Pos-Graduacao em Engenharia e Tecnologia de Materiais (PGETEMA)

    2006-07-01

    The objective of this work was to evaluate the change in mechanic properties and phase transformations of ferritic stainless steel tube, ASTM 268 Gr 446, applied in high temperature conditions. The work has used tubes from radiation furnaces of the PETROBRAS Xisto Industrialization Unit. The samples used for comparison were obtained from new tubes and tubes already used in furnaces. The test analyses were optical metallography, scanning electron microscopy, energy dispersive spectrometer, hardness and microhardness test and tension test. Results have shown that the new tubes presented a ferritic matrix and in old tubes were observed a great quantity of sigma phase and carbides. Along with the thickness of the tubes it was verified that the inside region presented an increase of sulfate and the outside region an increase of carbides. (author)

  12. Analysis of medicinal plant extracts by neutron activation method; Analise de extratos de plantas medicinais pelo metodo de ativacao com neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Vaz, Sandra Muntz

    1995-12-31

    This dissertation has presented the results from analysis of medicinal plant extracts using neutron activation method. Instrumental neutron activation analysis was applied to the determination of the elements Al, Br, Ca, Ce, Cl, Cr, Cs, Fe, K, La, Mg, Mn, Na, Rb, Sb, Sc and Zn in medicinal extracts obtained from Achyrolcline satureoides DC, Casearia sylvestris, Centella asiatica, Citrus aurantium L., Solano lycocarpum, Solidago microglossa, Stryphnondedron barbatiman and Zingiber officinale R. plants. The elements Hg and Se were determined using radiochemical separation by means of retention of Se in HMD inorganic exchanger and solvent extraction of Hg by bismuth diethyl-dithiocarbamate solution. Precision and accuracy of the results have been evaluated by analysing reference materials. The therapeutic action of some elements found in plant extracts analyzed was briefly discussed 70 refs., 13 figs., 15 tabs

  13. Thermoluminescent analysis of CaSO{sub 4} composites activated with rare earths; Analise termoluminescente de compositos de CaSO{sub 4} ativado com terras raras

    Energy Technology Data Exchange (ETDEWEB)

    Junot, D.O.; Chagas, M.A.P.; Souza, D.N., E-mail: danilo.junot@hotmail.com, E-mail: mchagasfisica@gmail.com, E-mail: divanizi@ufs.br [Universidade Federal de Sergipe (UFS), Sao Cristovao, SE (Brazil). Departamento de Fisica

    2013-07-01

    Since the thermoluminescence started to be applied to the dosimetry of ionizing radiation in 1940 different materials detectors have been proposed, and one of the most common is CaSO{sub 4}. The motivation of this work was to produce crystals of CaSO{sub 4} doped with rare earth elements such as europium (Eu), neodymium (Nd) and thulium (Tm). It was also produced crystals of CaSO{sub 4}:Ag. The interest in the production of these materials was to investigate other methods of production of thermoluminescent materials. The results show that the CaSO{sub 4}:Tm is more suitable for use in the thermoluminescent dosimetry. Although not the most intense peak, the peak at 170 °C could be a dosimetric peak. Analyses showed that all samples have a TL response proportional to the dose absorbed. (author)

  14. Thermal economical analysis of plants configuration proposed for expansion of a thermoelectric power plant; Analise termoeconomica de configuracoes de plantas propostas para a expansao de uma usina termoeletrica

    Energy Technology Data Exchange (ETDEWEB)

    Branco, Fabiano P.; Romao Junior, Ricardo A.; Mashiba, Marcos H.S.; Dib, Fernando H.; Maia, Cassio R.M.; Ramos, Ricardo A.V. [Universidade Estadual Paulista (UNESP), Ilha Solteira, SP (Brazil). Faculdade de Engenharia de Ilha Solteira (FEIS). Dept. de Engenharia Mecanica]. E-mails: pagliosa@dem.feis.unesp.br; fhdib@aluno.feis.unesp.br; rarjunior@aluno.feis.unesp.br; mashiba@dem.feis.unesp.br; cassio@dem.feis.unesp.br; ramos@dem.feis.unesp.br

    2006-07-01

    This paper performs thermodynamic and thermoeconomic analyses applied to a thermoelectric natural gas primarily open cycle power plant and posteriorly operating at combined cycle, with heat recovery steam generator with 1, 2 and 3 pressure level respectively. For the system thermodynamic, mass conservation, entropy and exergy balance equations are applied, considering a control volume for each equipment composing the plant. Using thermoeconomic analysis it is possible to evaluate the reflexes of the capital and fuel costs on the composition of the electricity generated, through the exergy fluxes, the exergy unitary costs and the exergoeconomic costs (US$/MWh), besides the costs for the produced powers. The plant is still submitted to known techniques of investment analysis for economical viability verification taking into account the investment and natural gas costs and the energy sales.

  15. Statistical analysis of the potassium concentration obtained through; Analise estatistica da concentracao de potassio obtida por aerolevantamentos geofisicos em diferentes formacoes geologicas na regiao de Santa Maria, RS

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, Joao Eduardo da Silva [Universidade Federal de Santa Maria (UFSM), RS (Brazil). Dept. de Estatistica]. E-mail: jesp61@gmail.com; Silva, Jose Luiz Silverio da; Pires, Carlos Alberto da Fonseca [Universidade Federal de Santa Maria (UFSM), RS (Brazil). Lab. de Hidrogeologia; Strieder, Adelir Jose [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil). Lab. de Modelagem Geologica e Ambiental

    2007-07-01

    The present work was developed in outcrops of Santa Maria region, southern Brazil, Rio Grande do Sul State. Statistic evaluations were applied in different rock types. The possibility to distinguish different geologic units, sedimentary and volcanic (acid and basic types) by means of the statistic analyses from the use of airborne gamma-ray spectrometry integrating potash radiation emissions data with geological and geochemistry data is discussed. This Project was carried out at 1973 by Geological Survey of Brazil/Companhia de Pesquisas de Recursos Minerais. The Camaqua Project evaluated the behavior of potash concentrations generating XYZ Geosof 1997 format, one grid, thematic map and digital thematic map files from this total area. Using these data base, the integration of statistics analyses in sedimentary formations which belong to the Depressao Central do Rio Grande do Sul and/or to volcanic rocks from Planalto da Serra Geral at the border of Parana Basin was tested. Univariate statistics model was used: the media, the standard media error, and the trust limits were estimated. The Tukey's Test was used in order to compare mean values. The results allowed to create criteria to distinguish geological formations based on their potash content. The back-calibration technique was employed to transform K radiation to percentage. Inside this context it was possible to define characteristic values from radioactive potash emissions and their trust ranges in relation to geologic formations. The potash variable when evaluated in relation to geographic Universal Transverse Mercator coordinates system showed a spatial relation following one polynomial model of second order, with one determination coefficient. The statistica 7.1 software Generalist Linear Models produced by Statistics Department of Federal University of Santa Maria/Brazil was used. (author)

  16. Trace element determination study in human hair by neutron activation analysis; Estudo da determinacao de elementos traco em cabelos humanos pelo metodo de analise por ativacao com neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Frazao, Selma Violato

    2008-07-01

    Human hair analysis studies have been subject of continuous interest due to the fact that they can be used as an important tool to evaluate trace element levels in the human body. These determinations have been carried out to use hair for environmental and occupational monitoring, to identify intoxication or poisoning by toxic metals, to assess nutritional status, to diagnose and to prevent diseases and in forensic sciences. Although hair analysis presents several advantages over other human tissue or fluid analyses, such as organ tissue, blood, urine and saliva, there are some controversies regarding the use of hair analysis data. These controversies arise from the fact that it is difficult to establish reliable reference values for trace elements in hair. The purpose of this study was to evaluate the factors that affect element concentrations in hair samples from a population considered healthy and residing in the Sao Paulo metropolitan area. The collected human head hair was cut in small pieces, washed, dried and analyzed by neutron activation analysis (NAA). Aliquots of hair samples and synthetic elemental standards were irradiated at the IEA-R1 nuclear research reactor for 16 h under a thermal neutron flux of about 5x10{sup 12} n cm{sup -2} s{sup -1} for As, Br, Ca, Co, Cr, Cs, Cu, Fe, K, La, Na, Sb, Sc, Se and Zn determinations. The induced gamma activities of the standards and samples were measured using a gamma ray spectrometer coupled to an hiperpure Ge detector. For quality control of the results, IAEA- 85 Human Hair and INCT-TL-1 Tea Leaves certified reference materials (CRMs) were analyzed. Results obtained in these CRMs presented for most of elements, good agreement with the values of the certificates (relative errors less than 10%) and good precision (variation coefficients less than 13.6%). Results of replicate hair sample analysis showed good reproducibility indicating homogeneity of the prepared sample. Results obtained in the analyses of dyed and

  17. Mechanodynamical analysis of nickel-titanium alloys for orthodontics application; Analise mecanodinamica de ligas de niquel-titanio para aplicacao ortodontica

    Energy Technology Data Exchange (ETDEWEB)

    Arruda, Carlos do Canto

    2002-07-01

    Nickel-titanium alloys may coexist in more than one crystalline structure. There is a high temperature phase, austenite, and a low temperature phase, martensite. The metallurgical basis for the superelasticity and the shape memory effect relies in the ability of these alloys to transform easily from one phase to another. There are three essential factors for the orthodontist to understand nickel-titanium alloys behaviour: stress; deflection; and temperature. These three factors are related to each other by the stress-deflection, stress-temperature and deflection-temperature diagrams. This work was undertaken with the objective to analyse commercial nickel-titanium alloys for orthodontics application, using the dynamical mechanical analyser - DMA. Four NiTi 0,017 X 0,025'' archwires were studied. The archwires were Copper NiTi 35 deg C (Ormco), Neo Sentalloy F200 (GAC), Nitinol Superelastic (Unitek) and NiTi (GAC). The different mechanodynamical properties such as elasticity and damping moduli were evaluated. Each commercial material was evaluated with and without a 1 N static force, aiming to evaluate phase transition temperature variation with stress. The austenitic to martensitic phase ratio, for the experiments without static force, was in the range of 1.59 to 1.85. For the 1 N static force tests the austenitic to martensitic phase ratio, ranged from 1.28 to 1.57 due to the higher martensite elasticity modulus. With elastic modulus variation with temperature behaviour, the orthodontist has the knowledge of the force variation applied in the tooth in relation to the oral cavity temperature change, for nickel-titanium alloys that undergo phase transformation. The damping capacity of the studied alloys depends on the materials state: martensitic phase; austenitic phase or during phase transformation. The martensitic phase shows higher dumping capacity. During phase transformation, an internal friction peak may be observed for the CuNiTi 35 deg C and Neo

  18. Mechanodynamical analysis of nickel-titanium alloys for orthodontics application; Analise mecanodinamica de ligas de niquel-titanio para aplicacao ortodontica

    Energy Technology Data Exchange (ETDEWEB)

    Arruda, Carlos do Canto

    2002-07-01

    Nickel-titanium alloys may coexist in more than one crystalline structure. There is a high temperature phase, austenite, and a low temperature phase, martensite. The metallurgical basis for the superelasticity and the shape memory effect relies in the ability of these alloys to transform easily from one phase to another. There are three essential factors for the orthodontist to understand nickel-titanium alloys behaviour: stress; deflection; and temperature. These three factors are related to each other by the stress-deflection, stress-temperature and deflection-temperature diagrams. This work was undertaken with the objective to analyse commercial nickel-titanium alloys for orthodontics application, using the dynamical mechanical analyser - DMA. Four NiTi 0,017 X 0,025'' archwires were studied. The archwires were Copper NiTi 35 deg C (Ormco), Neo Sentalloy F200 (GAC), Nitinol Superelastic (Unitek) and NiTi (GAC). The different mechanodynamical properties such as elasticity and damping moduli were evaluated. Each commercial material was evaluated with and without a 1 N static force, aiming to evaluate phase transition temperature variation with stress. The austenitic to martensitic phase ratio, for the experiments without static force, was in the range of 1.59 to 1.85. For the 1 N static force tests the austenitic to martensitic phase ratio, ranged from 1.28 to 1.57 due to the higher martensite elasticity modulus. With elastic modulus variation with temperature behaviour, the orthodontist has the knowledge of the force variation applied in the tooth in relation to the oral cavity temperature change, for nickel-titanium alloys that undergo phase transformation. The damping capacity of the studied alloys depends on the materials state: martensitic phase; austenitic phase or during phase transformation. The martensitic phase shows higher dumping capacity. During phase transformation, an internal friction peak may be observed for the CuNiTi 35 deg C and Neo Sentalloy F

  19. Analysis of natural radionuclides and lead in foods and diets; Analise de radionuclideos naturais e chumbo em produtos alimenticios e dietas

    Energy Technology Data Exchange (ETDEWEB)

    Bueno, Luciana

    1999-07-01

    The main purpose of the present study was to determine the lead-210, polonium-210 and lead concentrations in foods and diets. Consumption of food is generally the main route by which radionuclides can enter the human organism. Precision and accuracy of the methods developed were verifies by the analysis of reference materials from the International Atomic Energy Agency (IAEA). The method for polonium-210 analysis consisted of sample dissolution by using a microwave digester (open system) employing concentrated nitric acid and hydrogen peroxide, evaporation almost dryness, addition of hydrochloric acid, polonium deposition onto silver disc for six hours and counting by alpha spectrometry. Lead was analysed by atomic absorption technique. After sample dissolution in a microwave digester (using concentrated nitric acid and hydrogen peroxide) and dilution to 50 ml, 20{mu}l of the sample was injected in a pyrolytic graphite furnace - atomic absorption spectrophotometer equipped with Zeeman background correction. The assessment of the contaminants in foods and diets allowed to estimate the intake of these elements and for the radionuclides were also evaluated the radiation doses that the individuals selected were exposed by the food consumption. The effective dose for lead-210 by diets intake ranged from 1.3 to 4.3 {mu}Sv/year, corresponding to 25% of the resulting from polonium-210 intake. The dose due to the both natural radionuclides varied from 6.8 to 23.0 {mu}Sv/year. These values are in good agreement with the literature data. The value estimated by the United Nations Scientific Committee on Effects of Atomic Radiation (UNSCEAR, 1993) that is 60 {mu}Sv and lower than the dose of 0.02 Sv, limit established by ICRP, 1980. The lead levels found in the majority of the Brazilian foods are in good agreement with the values published by CONAT and FAO/WHO. However, some foods such as bean, potato, papaya, apple and rice present levels above of the recommended values by the

  20. Characterization, analysis and dating of archaeological ceramics from the Amazon basin through nuclear techniques; Caracterizacao, analise e datacao de ceramicas arqueologicas da Bacia Amazonica atraves de tecnicas nucleares

    Energy Technology Data Exchange (ETDEWEB)

    Latini, Rose Mary

    1998-07-01

    The aim of this work is to contribute to the research in the reconstruction of part of the pre-history of the Amazon Basin by means of an analytical methods combined with multivariate analysis, given a analytic basis that can be continued by the archaeological work, through the identification, classification, provenance and dating the ceramics found in different archaeological sites of the Hydro graphic Basin of the Purus river. Neutron activation analysis in conjunction multivariate statistical methods were used for the identification and classification and thermoluminescence was used for the dating. Chemical composition results were in better agreement with archaeological classification for the archaeologically define Iquiri, Quinan and Xapuri phases and less characteristics the Iaco and Jacuru archaeological phase were not well characterized. An homogeneous group was established by most of the samples collected from the Los Angeles Archaeological Site (LA) and was distinct from all the other groups analysed. The provenance studies made with ceramics collected at this site shows that they were made with clay from nearby river (Rio Ina). From the LA ceramics dating the average date of site occupation was 1660 years. The ceramic dating results from the external wall of a circular earth wall construction confirm the relation with the local pre-history. Beyond the Acre material two urns were dated from the Archaeological Site Morro Grande and Sao Jose at Araruama, Rio de Janeiro. (author)

  1. Optical fiber smart sensor for conformity analysis of Brazilian gasoline; Sensor inteligente a fibra otica para analise da conformidade da gosolina brasileira

    Energy Technology Data Exchange (ETDEWEB)

    Possetti, Gustavo R.C.; Camilotti, Emmanuelle; Arruda, Lucia V.R. de; Muller, Marcia; Fabris, Jose L. [Universidade Tecnologica Federal do Parana (UTFPR), Curitiba, PR (Brazil); Cocco, Lilian C.; Yamamoto, Carlos I. [Universidade Federal do Parana (UFPR), Curitiba, PR (Brazil); Falate, Rosane [Universidade Estadual de Ponta Grossa (UEPG), PR (Brazil)

    2008-07-01

    The conventional techniques employed to monitor the gasoline quality are expensive, time-consuming and demands on specialized workers to its execution. A study about the applicability of a long period grating, a fiber optic device, as an auxiliary tool for the analysis of Brazilian gasoline conformity is presented in this work. The long period grating spectral response was measured with the device immersed in samples of gasoline A with different proportions of hydrated ethyl alcohol fuel. A resolution of 0.23 % was obtained for the concentrations range of commercial interest, between 20 % and 40 %. The device performance was also tested with a set of conform and non-conform gasoline C samples. The device spectral response for these samples, as well as the samples densities and the conformity status were employed to train and to validate an artificial neural network with radial base function. The obtained results show that fiber optic sensors supervised by artificial neural networks can constitute systems for smart measurement with high applicability in the analyses of gasoline conformity, reducing costs and time related to conventional tests. (author)

  2. Steel catenary riser design based on coupled analysis methodology; Projeto de um riser rigido em catenaria baseado em metodologia de analise acoplada

    Energy Technology Data Exchange (ETDEWEB)

    Bahiense, Rodrigo A.; Rodrigues, Marcos V. [Det Norske Veritas (DNV), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Due to adoption of oil and gas production systems to deep and ultra-deep water, achieving frontiers that were not conceivable before, research in computational methods has contributed to implementation of sophisticated and efficient numerical tools in order to perform simulations considering those operational conditions. Thus, this work presents a steel catenary riser (SCR) design which is connected to a semi-submersible platform where the applied motions to SCR are obtained from analyses based on de-coupled and coupled methodologies. With increase of the line number of the system and water depth, the effects due to coupling of the lines on the platform motions are significant. It can be observed from performed evaluations for a floating production system, comparing the obtained results for SCR under extreme and fatigue conditions when it was submitted to the platform motions considering both methodologies mentioned. So, from the results obtained it can be concluded that for production system evaluated the adoption of decoupled methodology presents more conservative results. Thus the adoption of the coupled model associated to design practice of production lines presents as an alternative more realist and accurate to provide the optimization in the design of these structures. (author)

  3. Studies of trace element determinations in nails by neutron activation analysis method; Estudo de elementos traco em unhas pelo metodo de analise por ativacao com neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Aguiar, Amilton Reinaldo; Saiki, Mitiko [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    1996-07-01

    The purpose of this work was to develop the neutron activation analysis for trace element determinations in nails in order to apply this method to the study of the cystic fibrosis disease. It was verified that the elements Al, As, Br, Ca, Cd, Cl, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Se and Zn can be determined by using short and long irradiations with thermal neutron flux from 10{sup 11} to 10{sup 13} n.cm{sup -2}.{sup -1} at the IEA-R1 nuclear research reactor. The washing solutions of triton-X100, NH{sub 4} OH and acetone were tested in order to eliminate external contaminants from the nail samples. The nail analyses of the individual fingers from both of hands showed that the samples must be collected from all the fingers from both of hands to have a representative sample. The precision and the accuracy of the results were also examined by analyzing NIES 10C Rice Flour, IUPAC Bowen's Kale and NIST 1572 Citrus Leaves reference materials. (author)

  4. Analysis of electric power cogeneration using sugar cane bagasse; Uma analise da cogeracao de energia eletrica usando bagaco de cana-de-acucar

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Anna Cristina Barbosa Dias de

    1997-07-01

    Brazil impels its economy again. A development expected in 80 and 90 years it is real. This growth demands new technologies, new researches and bases that bear that growth. Electric power is in these bases, but Brazil is not ready for that. Electric power cogeneration possibility appears, using sugar cane bagasse. Alcohol and sugar plants have already that practice working with a low generation volume. With some investment this volume can be increased, adding about 10% to national energetic matrix. The aim of this work is to present a short time alternative for national electric matrix. It shows the energetic situation of the country, some experiences already implanted in some countries around the world and some options for equipment improvement used in alcohol and sugar plants. It is shown alternatives sources of electric power generation studied on Brazil, as well as the planning of National Energetic Program of ELETROBRAS. It analyses, in details, sugar cane bagasse use, which is used in Sao Paulo plants to generate electric power. Possible systems and troubles for its implantation in sugar and alcohol plants are discussed. (author)

  5. Fracture analyses of WWER reactor pressure vessels

    International Nuclear Information System (INIS)

    Sievers, J.; Liu, X.

    1997-01-01

    In the paper first the methodology of fracture assessment based on finite element (FE) calculations is described and compared with simplified methods. The FE based methodology was verified by analyses of large scale thermal shock experiments in the framework of the international comparative study FALSIRE (Fracture Analyses of Large Scale Experiments) organized by GRS and ORNL. Furthermore, selected results from fracture analyses of different WWER type RPVs with postulated cracks under different loading transients are presented. 11 refs, 13 figs, 1 tab

  6. Fracture analyses of WWER reactor pressure vessels

    Energy Technology Data Exchange (ETDEWEB)

    Sievers, J; Liu, X [Gesellschaft fuer Anlagen- und Reaktorsicherheit mbH (GRS), Koeln (Germany)

    1997-09-01

    In the paper first the methodology of fracture assessment based on finite element (FE) calculations is described and compared with simplified methods. The FE based methodology was verified by analyses of large scale thermal shock experiments in the framework of the international comparative study FALSIRE (Fracture Analyses of Large Scale Experiments) organized by GRS and ORNL. Furthermore, selected results from fracture analyses of different WWER type RPVs with postulated cracks under different loading transients are presented. 11 refs, 13 figs, 1 tab.

  7. [Anne Arold. Kontrastive Analyse...] / Paul Alvre

    Index Scriptorium Estoniae

    Alvre, Paul, 1921-2008

    2001-01-01

    Arvustus: Arold, Anne. Kontrastive analyse der Wortbildungsmuster im Deutschen und im Estnischen (am Beispiel der Aussehensadjektive). Tartu, 2000. (Dissertationes philologiae germanicae Universitatis Tartuensis)

  8. Geostatistical and stratigraphic analysis of deltaic reservoirs from the Reconcavo Basin, Brazil; Analise estratigrafica e geoestatistica de reservatorios deltaicos da Bacia do Reconcavo (BA)

    Energy Technology Data Exchange (ETDEWEB)

    Soares, Carlos Moreira

    1997-07-01

    This study presents the characterization of the external geometry of deltaic oil reservoirs, including the description of their areal distribution using geo statistic tools, such as variography and kriging. A high-resolution stratigraphic study was developed over a 25 km{sup 2} area, by using data from 276 closely-spaced wells of an oil-producer field from the Reconcavo Basin, northeastern Brazil. The studied succession records the progressive lacustrine transgression of a deltaic environment. Core data and stratigraphic cross sections suggest that the oil reservoirs are mostly amalgamated, delta-front lobes, and subordinately, crevasse deposits. Some important geometrical elements were recognized by the detailed variographic analysis developed for each stratigraphic unit (zone). The average width for the groups of deltaic lobes of one zone was measured from the variographic feature informally named as hole effect. This procedure was not possible for the other zones due to the intense lateral amalgamation of sandstones, indicated by many variographic nested structures. Net sand krigged maps for the main zones suggest a NNW-SSE orientation for the deltaic lobes, as also their common amalgamation and compensation arrangements. High-resolution stratigraphic analyses should include a more regional characterization of the depositional system that comprises the studied succession. On the other hand, geostatistical studies should be developed only after the recognition of the depositional processes acting in the study area and the geological meaning of the variable to be treated, including its spatial variability scales as a function of sand body thickness, orientation and amalgamation. (author)

  9. Analysis of agricultural soils by using energy dispersive X-ray fluorescence; Analise de solos agricolas por fluorescencia de raios-X por dispersao de energia

    Energy Technology Data Exchange (ETDEWEB)

    Anjos, Marcelino Jose dos

    2000-03-01

    In this work, we describe an Energy Dispersive x-ray Fluorescence System with a x-ray tube excitation for trace analysis of environmental samples (soil). The system was used to analyze the contamination of metals in treated soils with doses of 10, 20 and 30 ton/ha of compound organic of urban garbage of the type Fertilurb and 10 ton/ha of aviary bed (manure of birds). Samples of roots and foliages of plant radishes cultivated in these soils were also analyzed. The soil samples were collected in five different depths of 0,5, 5-10, 10-20, 20-40 and 40-60 cm. The experimental set-up is composed by an OXFORD X-ray (30 kV, 50 {mu}A and W anode), an ORTEC Si-Li detector, with an energy resolution of about 180 eV at 5.9 keV and an ORTEC multichannel-analyser. The X-ray spectrum tube is quasi-monochromatic by using of Ti filter. Samples were prepared in pellet form with superficial density in the range of 100 mg/cm{sup 2}. The fundamental parameter method was used in order to verify the elemental concentration. It was possible to determine the concentrations of thirteen elements: K, Ca, Ti, Mn, Fe, Cu, Zn, Br, Rb, Sr, Y, Zr and Pb in the treated soils with compounds organic. The results indicate that the values found for K, Ca, Rb, Sr, Zr and Pb are significantly above the upper confidence limits for the control soil ({alpha} = 0.05). There is a real different between these elements compared to their relationship in the control soils, ({alpha}=0,05). There is a real difference between these elements compared to their relationship in the control soils, confirming the influence of the organic compounds in the soil. (author)

  10. An MDE Approach for Modular Program Analyses

    NARCIS (Netherlands)

    Yildiz, Bugra Mehmet; Bockisch, Christoph; Aksit, Mehmet; Rensink, Arend

    Program analyses are an important tool to check if a system fulfills its specification. A typical implementation strategy for program analyses is to use an imperative, general-purpose language like Java, and access the program to be analyzed through libraries that offer an API for reading, writing

  11. Random error in cardiovascular meta-analyses

    DEFF Research Database (Denmark)

    Albalawi, Zaina; McAlister, Finlay A; Thorlund, Kristian

    2013-01-01

    BACKGROUND: Cochrane reviews are viewed as the gold standard in meta-analyses given their efforts to identify and limit systematic error which could cause spurious conclusions. The potential for random error to cause spurious conclusions in meta-analyses is less well appreciated. METHODS: We exam...

  12. Diversity of primary care systems analysed.

    NARCIS (Netherlands)

    Kringos, D.; Boerma, W.; Bourgueil, Y.; Cartier, T.; Dedeu, T.; Hasvold, T.; Hutchinson, A.; Lember, M.; Oleszczyk, M.; Pavlick, D.R.

    2015-01-01

    This chapter analyses differences between countries and explains why countries differ regarding the structure and process of primary care. The components of primary care strength that are used in the analyses are health policy-making, workforce development and in the care process itself (see Fig.

  13. Approximate analyses of inelastic effects in pipework

    International Nuclear Information System (INIS)

    Jobson, D.A.

    1983-01-01

    This presentation shows figures concerned with analyses of inelastic effects in pipework as follows: comparison of experimental and calculated simplified analyses results for free end rotation and for circumferential strain; interrupted stress relaxation; regenerated relaxation caused by reversed yield; buckling of straight pipe under combined bending and torsion; results of fatigues test of pipe bend

  14. Sensitivity analysis for heat diffusion in a fin on a nuclear fuel element; Analise de sensitividade na difusao de calor em uma aleta de um elemento combustivel nuclear

    Energy Technology Data Exchange (ETDEWEB)

    Tito, Max Werner de Carvalho

    2001-11-15

    The modern thermal systems generally present a growing complexity, as is in the case of nuclear power plants. It seems that is necessary the use of complex computation and mathematical tools in order to increase the efficiency of the operations, reduce costs and maximize profits while maintaining the integrity of its components. The use of sensitivity calculations plays an important role in this process providing relevant information regarding the resultant influence of variation or perturbation of its parameters as the system works. This technique is better known as sensitivity analysis and through its use makes possible the understanding of the effects of the parameters, which are fundamental for the project preparation, and for the development of preventive and corrective handling measurements of many pieces of equipment of modern engineering. The sensitivity calculation methodology is based generally on the response surface technique (graphic description of the functions of interest based in the results obtained from the system parameter variation). This method presents a lot of disadvantages and sometimes is even impracticable since many parameters can cause alterations or perturbations to the system and the model to analyse it can be very complex as well. The utilization of perturbative methods result appropriate as a practical solution to this problem especially in the presence of complex equations. Also it reduces the resultant computational calculus time considerably. The use of these methods becomes an essential tool to simplify the sensitivity analysis. In this dissertation, the differential perturbative method is applied in a heat conduction problem within a thermal system, made up of a one-dimensional circumferential fin on a nuclear fuel element. The fins are used to extend the thermal surfaces where convection occurs; thus increasing the heat transfer to many thermal pieces of equipment in order to obtain better results. The finned claddings are

  15. Level II Ergonomic Analyses, Dover AFB, DE

    Science.gov (United States)

    1999-02-01

    IERA-RS-BR-TR-1999-0002 UNITED STATES AIR FORCE IERA Level II Ergonomie Analyses, Dover AFB, DE Andrew Marcotte Marilyn Joyce The Joyce...Project (070401881, Washington, DC 20503. 1. AGENCY USE ONLY (Leave blank) 2. REPORT DATE 4. TITLE AND SUBTITLE Level II Ergonomie Analyses, Dover...1.0 INTRODUCTION 1-1 1.1 Purpose Of The Level II Ergonomie Analyses : 1-1 1.2 Approach 1-1 1.2.1 Initial Shop Selection and Administration of the

  16. Automatic incrementalization of Prolog based static analyses

    DEFF Research Database (Denmark)

    Eichberg, Michael; Kahl, Matthias; Saha, Diptikalyan

    2007-01-01

    Modem development environments integrate various static analyses into the build process. Analyses that analyze the whole project whenever the project changes are impractical in this context. We present an approach to automatic incrementalization of analyses that are specified as tabled logic...... programs and evaluated using incremental tabled evaluation, a technique for efficiently updating memo tables in response to changes in facts and rules. The approach has been implemented and integrated into the Eclipse IDE. Our measurements show that this technique is effective for automatically...

  17. Cost-Benefit Analyses of Transportation Investments

    DEFF Research Database (Denmark)

    Næss, Petter

    2006-01-01

    This paper discusses the practice of cost-benefit analyses of transportation infrastructure investment projects from the meta-theoretical perspective of critical realism. Such analyses are based on a number of untenable ontological assumptions about social value, human nature and the natural......-to-pay investigations. Accepting the ontological and epistemological assumptions of cost-benefit analysis involves an implicit acceptance of the ethical and political values favoured by these assumptions. Cost-benefit analyses of transportation investment projects tend to neglect long-term environmental consequences...

  18. Comparison with Russian analyses of meteor impact

    Energy Technology Data Exchange (ETDEWEB)

    Canavan, G.H.

    1997-06-01

    The inversion model for meteor impacts is used to discuss Russian analyses and compare principal results. For common input parameters, the models produce consistent estimates of impactor parameters. Directions for future research are discussed and prioritized.

  19. 7 CFR 94.102 - Analyses available.

    Science.gov (United States)

    2010-01-01

    ... analyses for total ash, fat by acid hydrolysis, moisture, salt, protein, beta-carotene, catalase... glycol, SLS, and zeolex. There are also be tests for starch, total sugars, sugar profile, whey, standard...

  20. Anthocyanin analyses of Vaccinium fruit dietary supplements

    Science.gov (United States)

    Vaccinium fruit ingredients within dietary supplements were identified by comparisons with anthocyanin analyses of known Vaccinium profiles (demonstration of anthocyanin fingerprinting). Available Vaccinium supplements were purchased and analyzed; their anthocyanin profiles (based on HPLC separation...

  1. Analyse of Maintenance Cost in ST

    CERN Document Server

    Jenssen, B W

    2001-01-01

    An analyse has been carried out in ST concerning the total costs for the division. Even though the target was the maintenance costs in ST, the global budget over has been analysed. This has been done since there is close relation between investments & consolidation and the required level for maintenance. The purpose of the analyse was to focus on maintenance cost in ST as a ratio of total maintenance costs over the replacement value of the equipment, and to make some comparisons with other industries and laboratories. Families of equipment have been defined and their corresponding ratios calculated. This first approach gives us some "quantitative" measurements. This analyse should be combined with performance indicators (more "qualitative" measurements) that are telling us how well we are performing. This will help us in defending our budget, make better priorities, and we will satisfy the requirements from our external auditors.

  2. A History of Rotorcraft Comprehensive Analyses

    Science.gov (United States)

    Johnson, Wayne

    2013-01-01

    A history of the development of rotorcraft comprehensive analyses is presented. Comprehensive analyses are digital computer programs that calculate the aeromechanical behavior of the rotor and aircraft, bringing together the most advanced models of the geometry, structure, dynamics, and aerodynamics available in rotary wing technology. The development of the major codes of the last five decades from industry, government, and universities is described. A number of common themes observed in this history are discussed.

  3. Safety analyses for reprocessing and waste processing

    International Nuclear Information System (INIS)

    1983-03-01

    Presentation of an incident analysis of process steps of the RP, simplified considerations concerning safety, and safety analyses of the storage and solidification facilities of the RP. A release tree method is developed and tested. An incident analysis of process steps, the evaluation of the SRL-study and safety analyses of the storage and solidification facilities of the RP are performed in particular. (DG) [de

  4. Risk analyses of nuclear power plants

    International Nuclear Information System (INIS)

    Jehee, J.N.T.; Seebregts, A.J.

    1991-02-01

    Probabilistic risk analyses of nuclear power plants are carried out by systematically analyzing the possible consequences of a broad spectrum of causes of accidents. The risk can be expressed in the probabilities for melt down, radioactive releases, or harmful effects for the environment. Following risk policies for chemical installations as expressed in the mandatory nature of External Safety Reports (EVRs) or, e.g., the publication ''How to deal with risks'', probabilistic risk analyses are required for nuclear power plants

  5. Telecommand and monitoring of automatic recloser through cell phone communication; Telecomando e monitoramento de religadoras automaticas via comunicacao celular

    Energy Technology Data Exchange (ETDEWEB)

    Gardiman, Vitor Luiz G.; Pires Neto, Francisco M.; Rufini, Ricardo; Marques, Rogerio [Bandeirante Energia, Sao Paulo, SP (Brazil)

    2004-02-01

    This article presents the system of tele command and monitoring automatic recloser of the medium voltage distribution network adopted by the Bandeirante Energia, Brazil, by using the cell phone network. The system, installed in 110 automatic reclosers, presented short term availability of tele supervision and tele control, fast installation, and operation and reliability low costs.

  6. Il Geoportale del Comune di Magliano in Toscana il webGIS e la generazione automatica dei CDU

    Directory of Open Access Journals (Sweden)

    Leonardo Bartoli

    2013-12-01

    Full Text Available In recent years, web GIS on urban issues has played a key role in modernizing many Italian Public Authorities. In line with these important technological changes, the municipality of Magliano in Toscana (GR has developed a mapping platform (Geoportal providing important services for citizens. The main application of Geoportal is the WebGIS interface which allows people to consult and search government resources (the Urban Structure Plan and maps (Regional Technical Cartography and Cadastre online. Linked to this geographical interface, an application has been developed that allows authorized users to create Town Planning Certificates (CDU automatically. Through simple web screens with guided forms, users can print off a highly accurate document quickly, thereby improving the efficiency of council offices by reducing processing times.

  7. Mass separated neutral particle energy analyser

    International Nuclear Information System (INIS)

    Takeuchi, Hiroshi; Matsuda, Toshiaki; Miura, Yukitoshi; Shiho, Makoto; Maeda, Hikosuke; Hashimoto, Kiyoshi; Hayashi, Kazuo.

    1983-09-01

    A mass separated neutral particle energy analyser which could simultaneously measure hydrogen and deuterium atoms emitted from tokamak plasma was constructed. The analyser was calibrated for the energy and mass separation in the energy range from 0.4 keV to 9 keV. In order to investigate the behavior of deuteron and proton in the JFT-2 tokamak plasma heated with ion cyclotron wave and neutral beam injection, this analyser was installed in JFT-2 tokamak. It was found that the energy spectrum could be determined with sufficient accuracy. The obtained ion temperature and ratio of deuteron and proton density from the energy spectrum were in good agreement with the value deduced from Doppler broadening of TiXIV line and the line intensities of H sub(α) and D sub(α) respectively. (author)

  8. Advanced toroidal facility vaccuum vessel stress analyses

    International Nuclear Information System (INIS)

    Hammonds, C.J.; Mayhall, J.A.

    1987-01-01

    The complex geometry of the Advance Toroidal Facility (ATF) vacuum vessel required special analysis techniques in investigating the structural behavior of the design. The response of a large-scale finite element model was found for transportation and operational loading. Several computer codes and systems, including the National Magnetic Fusion Energy Computer Center Cray machines, were implemented in accomplishing these analyses. The work combined complex methods that taxed the limits of both the codes and the computer systems involved. Using MSC/NASTRAN cyclic-symmetry solutions permitted using only 1/12 of the vessel geometry to mathematically analyze the entire vessel. This allowed the greater detail and accuracy demanded by the complex geometry of the vessel. Critical buckling-pressure analyses were performed with the same model. The development, results, and problems encountered in performing these analyses are described. 5 refs., 3 figs

  9. Thermal and stress analyses with ANSYS program

    International Nuclear Information System (INIS)

    Kanoo, Iwao; Kawaguchi, Osamu; Asakura, Junichi.

    1975-03-01

    Some analyses of the heat conduction and elastic/inelastic stresses, carried out in Power Reactor and Nuclear Fuel Development Corporation (PNC) in fiscal 1973 using ANSYS (Engineering Analysis System) program, are summarized. In chapter I, the present state of structural analysis programs available for a FBR (fast breeder reactor) in PNC is explained. Chapter II is a brief description of the ANSYS current status. In chapter III are presented 8 examples of the steady-state and transient thermal analyses for fast-reactor plant components, and in chapter IV 5 examples of the inelastic structural analysis. With the advance in the field of finite element method, its applications in design study should extend progressively in the future. The present report, it is hoped, will contribute as references in similar analyses and at the same time help to understand the deformation and strain behaviors of structures. (Mori, K.)

  10. Periodic safety analyses; Les essais periodiques

    Energy Technology Data Exchange (ETDEWEB)

    Gouffon, A; Zermizoglou, R

    1990-12-01

    The IAEA Safety Guide 50-SG-S8 devoted to 'Safety Aspects of Foundations of Nuclear Power Plants' indicates that operator of a NPP should establish a program for inspection of safe operation during construction, start-up and service life of the plant for obtaining data needed for estimating the life time of structures and components. At the same time the program should ensure that the safety margins are appropriate. Periodic safety analysis are an important part of the safety inspection program. Periodic safety reports is a method for testing the whole system or a part of the safety system following the precise criteria. Periodic safety analyses are not meant for qualification of the plant components. Separate analyses are devoted to: start-up, qualification of components and materials, and aging. All these analyses are described in this presentation. The last chapter describes the experience obtained for PWR-900 and PWR-1300 units from 1986-1989.

  11. A Simple, Reliable Precision Time Analyser

    Energy Technology Data Exchange (ETDEWEB)

    Joshi, B. V.; Nargundkar, V. R.; Subbarao, K.; Kamath, M. S.; Eligar, S. K. [Atomic Energy Establishment Trombay, Bombay (India)

    1966-06-15

    A 30-channel time analyser is described. The time analyser was designed and built for pulsed neutron research but can be applied to other uses. Most of the logic is performed by means of ferrite memory core and transistor switching circuits. This leads to great versatility, low power consumption, extreme reliability and low cost. The analyser described provides channel Widths from 10 {mu}s to 10 ms; arbitrarily wider channels are easily obtainable. It can handle counting rates up to 2000 counts/min in each channel with less than 1% dead time loss. There is a provision for an initial delay equal to 100 channel widths. An input pulse de-randomizer unit using tunnel diodes ensures exactly equal channel widths. A brief description of the principles involved in core switching circuitry is given. The core-transistor transfer loop is compared with the usual core-diode loops and is shown to be more versatile and better adapted to the making of a time analyser. The circuits derived from the basic loop are described. These include the scale of ten, the frequency dividers and the delay generator. The current drivers developed for driving the cores are described. The crystal-controlled clock which controls the width of the time channels and synchronizes the operation of the various circuits is described. The detector pulse derandomizer unit using tunnel diodes is described. The scheme of the time analyser is then described showing how the various circuits can be integrated together to form a versatile time analyser. (author)

  12. Fundamental data analyses for measurement control

    International Nuclear Information System (INIS)

    Campbell, K.; Barlich, G.L.; Fazal, B.; Strittmatter, R.B.

    1987-02-01

    A set of measurment control data analyses was selected for use by analysts responsible for maintaining measurement quality of nuclear materials accounting instrumentation. The analyses consist of control charts for bias and precision and statistical tests used as analytic supplements to the control charts. They provide the desired detection sensitivity and yet can be interpreted locally, quickly, and easily. The control charts provide for visual inspection of data and enable an alert reviewer to spot problems possibly before statistical tests detect them. The statistical tests are useful for automating the detection of departures from the controlled state or from the underlying assumptions (such as normality). 8 refs., 3 figs., 5 tabs

  13. A theoretical framework for analysing preschool teaching

    DEFF Research Database (Denmark)

    Chaiklin, Seth

    2014-01-01

    This article introduces a theoretical framework for analysing preschool teaching as a historically-grounded societal practice. The aim is to present a unified framework that can be used to analyse and compare both historical and contemporary examples of preschool teaching practice within and across...... national traditions. The framework has two main components, an analysis of preschool teaching as a practice, formed in relation to societal needs, and an analysis of the categorical relations which necessarily must be addressed in preschool teaching activity. The framework is introduced and illustrated...

  14. Power System Oscillatory Behaviors: Sources, Characteristics, & Analyses

    Energy Technology Data Exchange (ETDEWEB)

    Follum, James D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Tuffner, Francis K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dosiek, Luke A. [Union College, Schenectady, NY (United States); Pierre, John W. [Univ. of Wyoming, Laramie, WY (United States)

    2017-05-17

    This document is intended to provide a broad overview of the sources, characteristics, and analyses of natural and forced oscillatory behaviors in power systems. These aspects are necessarily linked. Oscillations appear in measurements with distinguishing characteristics derived from the oscillation’s source. These characteristics determine which analysis methods can be appropriately applied, and the results from these analyses can only be interpreted correctly with an understanding of the oscillation’s origin. To describe oscillations both at their source within a physical power system and within measurements, a perspective from the boundary between power system and signal processing theory has been adopted.

  15. 10 CFR 61.13 - Technical analyses.

    Science.gov (United States)

    2010-01-01

    ... air, soil, groundwater, surface water, plant uptake, and exhumation by burrowing animals. The analyses... processes such as erosion, mass wasting, slope failure, settlement of wastes and backfill, infiltration through covers over disposal areas and adjacent soils, and surface drainage of the disposal site. The...

  16. Analysing Simple Electric Motors in the Classroom

    Science.gov (United States)

    Yap, Jeff; MacIsaac, Dan

    2006-01-01

    Electromagnetic phenomena and devices such as motors are typically unfamiliar to both teachers and students. To better visualize and illustrate the abstract concepts (such as magnetic fields) underlying electricity and magnetism, we suggest that students construct and analyse the operation of a simply constructed Johnson electric motor. In this…

  17. En kvantitativ metode til analyse af radio

    Directory of Open Access Journals (Sweden)

    Christine Lejre

    2014-06-01

    Full Text Available I den danske såvel som den internationale radiolitteratur er bud på metoder til analyse af radiomediet sparsomme. Det skyldes formentlig, at radiomediet er svært at analysere, fordi det er et medie, der ikke er visualiseret i form af billeder eller understøttet af printet tekst. Denne artikel har til formål at beskrive en ny kvantitativ metode til analyse af radio, der tager særligt hensyn til radiomediets modalitet – lyd struktureret som et lineært forløb i tid. Metoden understøtter dermed både radiomediet som et medie i tid og som et blindt medie. Metoden er udviklet i forbindelse med en komparativ analyse af kulturprogrammer på P1 og Radio24syv lavet for Danmarks Radio. Artiklen peger på, at metoden er velegnet til analyse af ikke kun radio, men også andre medieplatforme samt forskellige journalistiske stofområder.

  18. Analysing User Lifetime in Voluntary Online Collaboration

    DEFF Research Database (Denmark)

    McHugh, Ronan; Larsen, Birger

    2010-01-01

    This paper analyses persuasion in online collaboration projects. It introduces a set of heuristics that can be applied to such projects and combines these with a quantitative analysis of user activity over time. Two example sites are studies, Open Street Map and The Pirate Bay. Results show that ...

  19. Analyses of hydraulic performance of velocity caps

    DEFF Research Database (Denmark)

    Christensen, Erik Damgaard; Degn Eskesen, Mark Chr.; Buhrkall, Jeppe

    2014-01-01

    The hydraulic performance of a velocity cap has been investigated. Velocity caps are often used in connection with offshore intakes. CFD (computational fluid dynamics) examined the flow through the cap openings and further down into the intake pipes. This was combined with dimension analyses...

  20. Quantitative analyses of shrinkage characteristics of neem ...

    African Journals Online (AJOL)

    Quantitative analyses of shrinkage characteristics of neem (Azadirachta indica A. Juss.) wood were carried out. Forty five wood specimens were prepared from the three ecological zones of north eastern Nigeria, viz: sahel savanna, sudan savanna and guinea savanna for the research. The results indicated that the wood ...

  1. UMTS signal measurements with digital spectrum analysers

    International Nuclear Information System (INIS)

    Licitra, G.; Palazzuoli, D.; Ricci, A. S.; Silvi, A. M.

    2004-01-01

    The launch of the Universal Mobile Telecommunications System (UNITS), the most recent mobile telecommunications standard has imposed the requirement of updating measurement instrumentation and methodologies. In order to define the most reliable measurement procedure, which is aimed at assessing the exposure to electromagnetic fields, modern spectrum analysers' features for correct signal characterisation has been reviewed. (authors)

  2. Hybrid Logical Analyses of the Ambient Calculus

    DEFF Research Database (Denmark)

    Bolander, Thomas; Hansen, Rene Rydhof

    2010-01-01

    In this paper, hybrid logic is used to formulate three control flow analyses for Mobile Ambients, a process calculus designed for modelling mobility. We show that hybrid logic is very well-suited to express the semantic structure of the ambient calculus and how features of hybrid logic can...

  3. Micromechanical photothermal analyser of microfluidic samples

    DEFF Research Database (Denmark)

    2014-01-01

    The present invention relates to a micromechanical photothermal analyser of microfluidic samples comprising an oblong micro-channel extending longitudinally from a support element, the micro-channel is made from at least two materials with different thermal expansion coefficients, wherein...

  4. Systematic review and meta-analyses

    DEFF Research Database (Denmark)

    Dreier, Julie Werenberg; Andersen, Anne-Marie Nybo; Berg-Beckhoff, Gabriele

    2014-01-01

    1990 were excluded. RESULTS: The available literature supported an increased risk of adverse offspring health in association with fever during pregnancy. The strongest evidence was available for neural tube defects, congenital heart defects, and oral clefts, in which meta-analyses suggested between a 1...

  5. Secundaire analyses organisatiebeleid psychosociale arbeidsbelasting (PSA)

    NARCIS (Netherlands)

    Kraan, K.O.; Houtman, I.L.D.

    2016-01-01

    Hoe het organisatiebeleid rond psychosociale arbeidsbelasting (PSA) eruit ziet anno 2014 en welke samenhang er is met ander beleid en uitkomstmaten, zijn de centrale vragen in dit onderzoek. De resultaten van deze verdiepende analyses kunnen ten goede komen aan de lopende campagne ‘Check je

  6. Exergoeconomic and environmental analyses of CO

    NARCIS (Netherlands)

    Mosaffa, A. H.; Garousi Farshi, L; Infante Ferreira, C.A.; Rosen, M. A.

    2016-01-01

    Exergoeconomic and environmental analyses are presented for two CO2/NH3 cascade refrigeration systems equipped with (1) two flash tanks and (2) a flash tank along with a flash intercooler with indirect subcooler. A comparative study is performed for the proposed systems, and

  7. Meta-analyses on viral hepatitis

    DEFF Research Database (Denmark)

    Gluud, Lise L; Gluud, Christian

    2009-01-01

    This article summarizes the meta-analyses of interventions for viral hepatitis A, B, and C. Some of the interventions assessed are described in small trials with unclear bias control. Other interventions are supported by large, high-quality trials. Although attempts have been made to adjust...

  8. Multivariate differential analyses of adolescents' experiences of ...

    African Journals Online (AJOL)

    Aggression is reasoned to be dependent on aspects such as self-concept, moral reasoning, communication, frustration tolerance and family relationships. To analyse the data from questionnaires of 101 families (95 adolescents, 95 mothers and 91 fathers) Cronbach Alpha, various consecutive first and second order factor ...

  9. Chromosomal evolution and phylogenetic analyses in Tayassu ...

    Indian Academy of Sciences (India)

    Chromosome preparation and karyotype description. The material analysed consists of chromosome preparations of the tayassuid species T. pecari (three individuals) and. P. tajacu (four individuals) and were made from short-term lymphocyte cultures of whole blood samples using standard protocols (Chaves et al. 2002).

  10. Grey literature in meta-analyses.

    Science.gov (United States)

    Conn, Vicki S; Valentine, Jeffrey C; Cooper, Harris M; Rantz, Marilyn J

    2003-01-01

    In meta-analysis, researchers combine the results of individual studies to arrive at cumulative conclusions. Meta-analysts sometimes include "grey literature" in their evidential base, which includes unpublished studies and studies published outside widely available journals. Because grey literature is a source of data that might not employ peer review, critics have questioned the validity of its data and the results of meta-analyses that include it. To examine evidence regarding whether grey literature should be included in meta-analyses and strategies to manage grey literature in quantitative synthesis. This article reviews evidence on whether the results of studies published in peer-reviewed journals are representative of results from broader samplings of research on a topic as a rationale for inclusion of grey literature. Strategies to enhance access to grey literature are addressed. The most consistent and robust difference between published and grey literature is that published research is more likely to contain results that are statistically significant. Effect size estimates of published research are about one-third larger than those of unpublished studies. Unfunded and small sample studies are less likely to be published. Yet, importantly, methodological rigor does not differ between published and grey literature. Meta-analyses that exclude grey literature likely (a) over-represent studies with statistically significant findings, (b) inflate effect size estimates, and (c) provide less precise effect size estimates than meta-analyses including grey literature. Meta-analyses should include grey literature to fully reflect the existing evidential base and should assess the impact of methodological variations through moderator analysis.

  11. Thermal analyses. Information on the expected baking process; Thermische analyses. Informatie over een te verwachten bakgedrag

    Energy Technology Data Exchange (ETDEWEB)

    Van Wijck, H. [Stichting Technisch Centrum voor de Keramische Industrie TCKI, Velp (Netherlands)

    2009-09-01

    The design process and the drying process for architectural ceramics and pottery partly determine the characteristics of the final product, but the largest changes occur during the baking process. An overview is provided of the different thermal analyses and how the information from these analyses can predict the process in practice. (mk) [Dutch] Het vormgevingsproces en het droogproces voor bouwkeramische producten en aardewerk bepalen voor een deel de eigenschappen van de eindproducten, maar de grootste veranderingen treden op bij het bakproces. Een overzicht wordt gegeven van de verschillende thermische analyses en hoe de informatie uit deze analyses het in de praktijk te verwachten gedrag kan voorspellen.

  12. Analyses and characterization of double shell tank

    Energy Technology Data Exchange (ETDEWEB)

    1994-10-04

    Evaporator candidate feed from tank 241-AP-108 (108-AP) was sampled under prescribed protocol. Physical, inorganic, and radiochemical analyses were performed on tank 108-AP. Characterization of evaporator feed tank waste is needed primarily for an evaluation of its suitability to be safely processed through the evaporator. Such analyses should provide sufficient information regarding the waste composition to confidently determine whether constituent concentrations are within not only safe operating limits, but should also be relevant to functional limits for operation of the evaporator. Characterization of tank constituent concentrations should provide data which enable a prediction of where the types and amounts of environmentally hazardous waste are likely to occur in the evaporator product streams.

  13. DCH analyses using the CONTAIN code

    International Nuclear Information System (INIS)

    Hong, Sung Wan; Kim, Hee Dong

    1996-08-01

    This report describes CONTAIN analyses performed during participation in the project of 'DCH issue resolution for ice condenser plants' which is sponsored by NRC at SNL. Even though the calculations were performed for the Ice Condenser plant, CONTAIN code has been used for analyses of many phenomena in the PWR containment and the DCH module can be commonly applied to any plant types. The present ice condenser issue resolution effort intended to provide guidance as to what might be needed to resolve DCH for ice condenser plants. It includes both a screening analysis and a scoping study if the screening analysis cannot provide an complete resolution. The followings are the results concerning DCH loads in descending order. 1. Availability of ignition sources prior to vessel breach 2. availability and effectiveness of ice in the ice condenser 3. Loads modeling uncertainties related to co-ejected RPV water 4. Other loads modeling uncertainties 10 tabs., 3 figs., 14 refs. (Author)

  14. DCH analyses using the CONTAIN code

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Sung Wan; Kim, Hee Dong [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1996-08-01

    This report describes CONTAIN analyses performed during participation in the project of `DCH issue resolution for ice condenser plants` which is sponsored by NRC at SNL. Even though the calculations were performed for the Ice Condenser plant, CONTAIN code has been used for analyses of many phenomena in the PWR containment and the DCH module can be commonly applied to any plant types. The present ice condenser issue resolution effort intended to provide guidance as to what might be needed to resolve DCH for ice condenser plants. It includes both a screening analysis and a scoping study if the screening analysis cannot provide an complete resolution. The followings are the results concerning DCH loads in descending order. 1. Availability of ignition sources prior to vessel breach 2. availability and effectiveness of ice in the ice condenser 3. Loads modeling uncertainties related to co-ejected RPV water 4. Other loads modeling uncertainties 10 tabs., 3 figs., 14 refs. (Author).

  15. Analyses and characterization of double shell tank

    International Nuclear Information System (INIS)

    1994-01-01

    Evaporator candidate feed from tank 241-AP-108 (108-AP) was sampled under prescribed protocol. Physical, inorganic, and radiochemical analyses were performed on tank 108-AP. Characterization of evaporator feed tank waste is needed primarily for an evaluation of its suitability to be safely processed through the evaporator. Such analyses should provide sufficient information regarding the waste composition to confidently determine whether constituent concentrations are within not only safe operating limits, but should also be relevant to functional limits for operation of the evaporator. Characterization of tank constituent concentrations should provide data which enable a prediction of where the types and amounts of environmentally hazardous waste are likely to occur in the evaporator product streams

  16. Soil analyses by ICP-MS (Review)

    International Nuclear Information System (INIS)

    Yamasaki, Shin-ichi

    2000-01-01

    Soil analyses by inductively coupled plasma mass spectrometry (ICP-MS) are reviewed. The first half of the paper is devoted to the development of techniques applicable to soil analyses, where diverse analytical parameters are carefully evaluated. However, the choice of soil samples is somewhat arbitrary, and only a limited number of samples (mostly reference materials) are examined. In the second half, efforts are mostly concentrated on the introduction of reports, where a large number of samples and/or very precious samples have been analyzed. Although the analytical techniques used in these reports are not necessarily novel, valuable information concerning such topics as background levels of elements in soils, chemical forms of elements in soils and behavior of elements in soil ecosystems and the environment can be obtained. The major topics discussed are total elemental analysis, analysis of radionuclides with long half-lives, speciation, leaching techniques, and isotope ratio measurements. (author)

  17. Sorption analyses in materials science: selected oxides

    International Nuclear Information System (INIS)

    Fuller, E.L. Jr.; Condon, J.B.; Eager, M.H.; Jones, L.L.

    1981-01-01

    Physical adsorption studies have been shown to be extremely valuable in studying the chemistry and structure of dispersed materials. Many processes rely on the access to the large amount of surface made available by the high degree of dispersion. Conversely, there are many applications where consolidation of the dispersed solids is required. Several systems (silica gel, alumina catalysts, mineralogic alumino-silicates, and yttrium oxide plasters) have been studied to show the type and amount of chemical and structural information that can be obtained. Some review of current theories is given and additional concepts are developed based on statistical and thermodynamic arguments. The results are applied to sorption data to show that detailed sorption analyses are extremely useful and can provide valuable information that is difficult to obtain by any other means. Considerable emphasis has been placed on data analyses and interpretation of a nonclassical nature to show the potential of such studies that is often not recognized nor utilized

  18. Standardized analyses of nuclear shipping containers

    International Nuclear Information System (INIS)

    Parks, C.V.; Hermann, O.W.; Petrie, L.M.; Hoffman, T.J.; Tang, J.S.; Landers, N.F.; Turner, W.D.

    1983-01-01

    This paper describes improved capabilities for analyses of nuclear fuel shipping containers within SCALE -- a modular code system for Standardized Computer Analyses for Licensing Evaluation. Criticality analysis improvements include the new KENO V, a code which contains an enhanced geometry package and a new control module which uses KENO V and allows a criticality search on optimum pitch (maximum k-effective) to be performed. The SAS2 sequence is a new shielding analysis module which couples fuel burnup, source term generation, and radial cask shielding. The SAS5 shielding sequence allows a multidimensional Monte Carlo analysis of a shipping cask with code generated biasing of the particle histories. The thermal analysis sequence (HTAS1) provides an easy-to-use tool for evaluating a shipping cask response to the accident capability of the SCALE system to provide the cask designer or evaluator with a computational system that provides the automated procedures and easy-to-understand input that leads to standarization

  19. Quantitative Analyse und Visualisierung der Herzfunktionen

    Science.gov (United States)

    Sauer, Anne; Schwarz, Tobias; Engel, Nicole; Seitel, Mathias; Kenngott, Hannes; Mohrhardt, Carsten; Loßnitzer, Dirk; Giannitsis, Evangelos; Katus, Hugo A.; Meinzer, Hans-Peter

    Die computergestützte bildbasierte Analyse der Herzfunktionen ist mittlerweile Standard in der Kardiologie. Die verfügbaren Produkte erfordern meist ein hohes Maß an Benutzerinteraktion und somit einen erhöhten Zeitaufwand. In dieser Arbeit wird ein Ansatz vorgestellt, der dem Kardiologen eine größtenteils automatische Analyse der Herzfunktionen mittels MRT-Bilddaten ermöglicht und damit Zeitersparnis schafft. Hierbei werden alle relevanten herzphysiologsichen Parameter berechnet und mithilfe von Diagrammen und Graphen visualisiert. Diese Berechnungen werden evaluiert, indem die ermittelten Werte mit manuell vermessenen verglichen werden. Der hierbei berechnete mittlere Fehler liegt mit 2,85 mm für die Wanddicke und 1,61 mm für die Wanddickenzunahme immer noch im Bereich einer Pixelgrösse der verwendeten Bilder.

  20. Exergetic and thermoeconomic analyses of power plants

    International Nuclear Information System (INIS)

    Kwak, H.-Y.; Kim, D.-J.; Jeon, J.-S.

    2003-01-01

    Exergetic and thermoeconomic analyses were performed for a 500-MW combined cycle plant. In these analyses, mass and energy conservation laws were applied to each component of the system. Quantitative balances of the exergy and exergetic cost for each component, and for the whole system was carefully considered. The exergoeconomic model, which represented the productive structure of the system considered, was used to visualize the cost formation process and the productive interaction between components. The computer program developed in this study can determine the production costs of power plants, such as gas- and steam-turbines plants and gas-turbine cogeneration plants. The program can be also be used to study plant characteristics, namely, thermodynamic performance and sensitivity to changes in process and/or component design variables

  1. Pratique de l'analyse fonctionelle

    CERN Document Server

    Tassinari, Robert

    1997-01-01

    Mettre au point un produit ou un service qui soit parfaitement adapté aux besoins et aux exigences du client est indispensable pour l'entreprise. Pour ne rien laisser au hasard, il s'agit de suivre une méthodologie rigoureuse : celle de l'analyse fonctionnelle. Cet ouvrage définit précisément cette méthode ainsi que ses champs d'application. Il décrit les méthodes les plus performantes en termes de conception de produit et de recherche de qualité et introduit la notion d'analyse fonctionnelle interne. Un ouvrage clé pour optimiser les processus de conception de produit dans son entreprise. -- Idées clés, par Business Digest

  2. Kinetic stability analyses in a bumpy cylinder

    International Nuclear Information System (INIS)

    Dominguez, R.R.; Berk, H.L.

    1981-01-01

    Recent interest in the ELMO Bumpy Torus (EBT) has prompted a number of stability analyses of both the hot electron rings and the toroidal plasma. Typically these works employ the local approximation, neglecting radial eigenmode structure and ballooning effects to perform the stability analysis. In the present work we develop a fully kinetic formalism for performing nonlocal stability analyses in a bumpy cylinder. We show that the Vlasov-Maxwell integral equations (with one ignorable coordinate) are self-adjoint and hence amenable to analysis using numerical techniques developed for self-adjoint systems of equations. The representation we obtain for the kernel of the Vlasov-Maxwell equations is a differential operator of arbitrarily high order. This form leads to a manifestly self-adjoint system of differential equations for long wavelength modes

  3. Sectorial Group for Incident Analyses (GSAI)

    International Nuclear Information System (INIS)

    Galles, Q.; Gamo, J. M.; Jorda, M.; Sanchez-Garrido, P.; Lopez, F.; Asensio, L.; Reig, J.

    2013-01-01

    In 2008, the UNESA Nuclear Energy Committee (CEN) proposed the creation of a working group formed by experts from all Spanish NPPs with the purpose of jointly analyze relevant incidents occurred in each one of the plants. This initiative was a response to a historical situation in which the exchange of information on incidents between the Spanish NPP's was below the desired level. In june 2009, UNESA's Guide CEN-29 established the performance criteria for the so called Sectorial Group for Incident Analyses (GSAI), whose activity would be coordinated by the UNESA's Group for Incident Analyses (GSAI), whose activity would be coordinated by the UNESA's Group of Operating Experience, under the Operations Commission (COP). (Author)

  4. Analyses of cavitation instabilities in ductile metals

    DEFF Research Database (Denmark)

    Tvergaard, Viggo

    2007-01-01

    Cavitation instabilities have been predicted for a single void in a ductile metal stressed under high triaxiality conditions. In experiments for a ceramic reinforced by metal particles a single dominant void has been observed on the fracture surface of some of the metal particles bridging a crack......, and also tests for a thin ductile metal layer bonding two ceramic blocks have indicated rapid void growth. Analyses for these material configurations are discussed here. When the void radius is very small, a nonlocal plasticity model is needed to account for observed size-effects, and recent analyses......, while the surrounding voids are represented by a porous ductile material model in terms of a field quantity that specifies the variation of the void volume fraction in the surrounding metal....

  5. Analysing organic transistors based on interface approximation

    International Nuclear Information System (INIS)

    Akiyama, Yuto; Mori, Takehiko

    2014-01-01

    Temperature-dependent characteristics of organic transistors are analysed thoroughly using interface approximation. In contrast to amorphous silicon transistors, it is characteristic of organic transistors that the accumulation layer is concentrated on the first monolayer, and it is appropriate to consider interface charge rather than band bending. On the basis of this model, observed characteristics of hexamethylenetetrathiafulvalene (HMTTF) and dibenzotetrathiafulvalene (DBTTF) transistors with various surface treatments are analysed, and the trap distribution is extracted. In turn, starting from a simple exponential distribution, we can reproduce the temperature-dependent transistor characteristics as well as the gate voltage dependence of the activation energy, so we can investigate various aspects of organic transistors self-consistently under the interface approximation. Small deviation from such an ideal transistor operation is discussed assuming the presence of an energetically discrete trap level, which leads to a hump in the transfer characteristics. The contact resistance is estimated by measuring the transfer characteristics up to the linear region

  6. New environmental metabarcodes for analysing soil DNA

    DEFF Research Database (Denmark)

    Epp, Laura S.; Boessenkool, Sanne; Bellemain, Eva P.

    2012-01-01

    was systematically evaluated by (i) in silico PCRs using all standard sequences in the EMBL public database as templates, (ii) in vitro PCRs of DNA extracts from surface soil samples from a site in Varanger, northern Norway and (iii) in vitro PCRs of DNA extracts from permanently frozen sediment samples of late......Metabarcoding approaches use total and typically degraded DNA from environmental samples to analyse biotic assemblages and can potentially be carried out for any kinds of organisms in an ecosystem. These analyses rely on specific markers, here called metabarcodes, which should be optimized...... for taxonomic resolution, minimal bias in amplification of the target organism group and short sequence length. Using bioinformatic tools, we developed metabarcodes for several groups of organisms: fungi, bryophytes, enchytraeids, beetles and birds. The ability of these metabarcodes to amplify the target groups...

  7. Visuelle Analyse von E-mail-Verkehr

    OpenAIRE

    Mansmann, Florian

    2003-01-01

    Diese Arbeit beschreibt Methoden zur visuellen geographischen Analyse von E-mail Verkehr.Aus dem Header einer E-mail können Hostadressen und IP-Adressen herausgefiltert werden. Anhand einer Datenbank werden diesen Host- und IP-Adressen geographische Koordinaten zugeordnet.Durch eine Visualisierung werden in übersichtlicher Art und Weise mehrere tausend E-mail Routen dargestellt. Zusätzlich dazu wurden interktive Manipulationsmöglichkeiten vorgestellt, welche eine visuelle Exploration der Date...

  8. BWR core melt progression phenomena: Experimental analyses

    International Nuclear Information System (INIS)

    Ott, L.J.

    1992-01-01

    In the BWR Core Melt in Progression Phenomena Program, experimental results concerning severe fuel damage and core melt progression in BWR core geometry are used to evaluate existing models of the governing phenomena. These include control blade eutectic liquefaction and the subsequent relocation and attack on the channel box structure; oxidation heating and hydrogen generation; Zircaloy melting and relocation; and the continuing oxidation of zirconium with metallic blockage formation. Integral data have been obtained from the BWR DF-4 experiment in the ACRR and from BWR tests in the German CORA exreactor fuel-damage test facility. Additional integral data will be obtained from new CORA BWR test, the full-length FLHT-6 BWR test in the NRU test reactor, and the new program of exreactor experiments at Sandia National Laboratories (SNL) on metallic melt relocation and blockage formation. an essential part of this activity is interpretation and use of the results of the BWR tests. The Oak Ridge National Laboratory (ORNL) has developed experiment-specific models for analysis of the BWR experiments; to date, these models have permitted far more precise analyses of the conditions in these experiments than has previously been available. These analyses have provided a basis for more accurate interpretation of the phenomena that the experiments are intended to investigate. The results of posttest analyses of BWR experiments are discussed and significant findings from these analyses are explained. The ORNL control blade/canister models with materials interaction, relocation and blockage models are currently being implemented in SCDAP/RELAP5 as an optional structural component

  9. En Billig GPS Data Analyse Platform

    DEFF Research Database (Denmark)

    Andersen, Ove; Christiansen, Nick; Larsen, Niels T.

    2011-01-01

    Denne artikel præsenterer en komplet software platform til analyse af GPS data. Platformen er bygget udelukkende vha. open-source komponenter. De enkelte komponenter i platformen beskrives i detaljer. Fordele og ulemper ved at bruge open-source diskuteres herunder hvilke IT politiske tiltage, der...... organisationer med et digitalt vejkort og GPS data begynde at lave trafikanalyser på disse data. Det er et krav, at der er passende IT kompetencer tilstede i organisationen....

  10. Neuronal network analyses: premises, promises and uncertainties

    OpenAIRE

    Parker, David

    2010-01-01

    Neuronal networks assemble the cellular components needed for sensory, motor and cognitive functions. Any rational intervention in the nervous system will thus require an understanding of network function. Obtaining this understanding is widely considered to be one of the major tasks facing neuroscience today. Network analyses have been performed for some years in relatively simple systems. In addition to the direct insights these systems have provided, they also illustrate some of the diffic...

  11. Modelling and analysing oriented fibrous structures

    International Nuclear Information System (INIS)

    Rantala, M; Lassas, M; Siltanen, S; Sampo, J; Takalo, J; Timonen, J

    2014-01-01

    A mathematical model for fibrous structures using a direction dependent scaling law is presented. The orientation of fibrous nets (e.g. paper) is analysed with a method based on the curvelet transform. The curvelet-based orientation analysis has been tested successfully on real data from paper samples: the major directions of fibrefibre orientation can apparently be recovered. Similar results are achieved in tests on data simulated by the new model, allowing a comparison with ground truth

  12. Kinematic gait analyses in healthy Golden Retrievers

    OpenAIRE

    Silva, Gabriela C.A.; Cardoso, Mariana Trés; Gaiad, Thais P.; Brolio, Marina P.; Oliveira, Vanessa C.; Assis Neto, Antonio; Martins, Daniele S.; Ambrósio, Carlos E.

    2014-01-01

    Kinematic analysis relates to the relative movement between rigid bodies and finds application in gait analysis and other body movements, interpretation of their data when there is change, determines the choice of treatment to be instituted. The objective of this study was to standardize the march of Dog Golden Retriever Healthy to assist in the diagnosis and treatment of musculoskeletal disorders. We used a kinematic analysis system to analyse the gait of seven dogs Golden Retriever, female,...

  13. Evaluation of periodic safety status analyses

    International Nuclear Information System (INIS)

    Faber, C.; Staub, G.

    1997-01-01

    In order to carry out the evaluation of safety status analyses by the safety assessor within the periodical safety reviews of nuclear power plants safety goal oriented requirements have been formulated together with complementary evaluation criteria. Their application in an inter-disciplinary coopertion covering the subject areas involved facilitates a complete safety goal oriented assessment of the plant status. The procedure is outlined briefly by an example for the safety goal 'reactivity control' for BWRs. (orig.) [de

  14. Application of RUNTA code in flood analyses

    International Nuclear Information System (INIS)

    Perez Martin, F.; Benitez Fonzalez, F.

    1994-01-01

    Flood probability analyses carried out to date indicate the need to evaluate a large number of flood scenarios. This necessity is due to a variety of reasons, the most important of which include: - Large number of potential flood sources - Wide variety of characteristics of flood sources - Large possibility of flood-affected areas becoming inter linked, depending on the location of the potential flood sources - Diversity of flood flows from one flood source, depending on the size of the rupture and mode of operation - Isolation times applicable - Uncertainties in respect of the structural resistance of doors, penetration seals and floors - Applicable degrees of obstruction of floor drainage system Consequently, a tool which carries out the large number of calculations usually required in flood analyses, with speed and flexibility, is considered necessary. The RUNTA Code enables the range of possible scenarios to be calculated numerically, in accordance with all those parameters which, as a result of previous flood analyses, it is necessary to take into account in order to cover all the possible floods associated with each flood area

  15. An analyser for power plant operations

    International Nuclear Information System (INIS)

    Rogers, A.E.; Wulff, W.

    1990-01-01

    Safe and reliable operation of power plants is essential. Power plant operators need a forecast of what the plant will do when its current state is disturbed. The in-line plant analyser provides precisely this information at relatively low cost. The plant analyser scheme uses a mathematical model of the dynamic behaviour of the plant to establish a numerical simulation. Over a period of time, the simulation is calibrated with measurements from the particular plant in which it is used. The analyser then provides a reference against which to evaluate the plant's current behaviour. It can be used to alert the operator to any atypical excursions or combinations of readings that indicate malfunction or off-normal conditions that, as the Three Mile Island event suggests, are not easily recognised by operators. In a look-ahead mode, it can forecast the behaviour resulting from an intended change in settings or operating conditions. Then, when such changes are made, the plant's behaviour can be tracked against the forecast in order to assure that the plant is behaving as expected. It can be used to investigate malfunctions that have occurred and test possible adjustments in operating procedures. Finally, it can be used to consider how far from the limits of performance the elements of the plant are operating. Then by adjusting settings, the required power can be generated with as little stress as possible on the equipment. (6 figures) (Author)

  16. Comparison of elastic and inelastic analyses

    International Nuclear Information System (INIS)

    Ammerman, D.J.; Heinstein, M.W.; Wellman, G.W.

    1992-01-01

    The use of inelastic analysis methods instead of the traditional elastic analysis methods in the design of radioactive material (RAM) transport packagings leads to a better understanding of the response of the package to mechanical loadings. Thus, better assessment of the containment, thermal protection, and shielding integrity of the package after a structure accident event can be made. A more accurate prediction of the package response can lead to enhanced safety and also allow for a more efficient use of materials, possibly leading to a package with higher capacity or lower weight. This paper discusses the advantages and disadvantages of using inelastic analysis in the design of RAM shipping packages. The use of inelastic analysis presents several problems to the package designer. When using inelastic analysis the entire nonlinear response of the material must be known, including the effects of temperature changes and strain rate. Another problem is that there currently is not an acceptance criteria for this type of analysis that is approved by regulatory agencies. Inelastic analysis acceptance criteria based on failure stress, failure strain , or plastic energy density could be developed. For both elastic and inelastic analyses it is also important to include other sources of stress in the analyses, such as fabrication stresses, thermal stresses, stresses from bolt preloading, and contact stresses at material interfaces. Offsetting these added difficulties is the improved knowledge of the package behavior. This allows for incorporation of a more uniform margin of safety, which can result in weight savings and a higher level of confidence in the post-accident configuration of the package. In this paper, comparisons between elastic and inelastic analyses are made for a simple ring structure and for a package to transport a large quantity of RAM by rail (rail cask) with lead gamma shielding to illustrate the differences in the two analysis techniques

  17. IDEA: Interactive Display for Evolutionary Analyses.

    Science.gov (United States)

    Egan, Amy; Mahurkar, Anup; Crabtree, Jonathan; Badger, Jonathan H; Carlton, Jane M; Silva, Joana C

    2008-12-08

    The availability of complete genomic sequences for hundreds of organisms promises to make obtaining genome-wide estimates of substitution rates, selective constraints and other molecular evolution variables of interest an increasingly important approach to addressing broad evolutionary questions. Two of the programs most widely used for this purpose are codeml and baseml, parts of the PAML (Phylogenetic Analysis by Maximum Likelihood) suite. A significant drawback of these programs is their lack of a graphical user interface, which can limit their user base and considerably reduce their efficiency. We have developed IDEA (Interactive Display for Evolutionary Analyses), an intuitive graphical input and output interface which interacts with PHYLIP for phylogeny reconstruction and with codeml and baseml for molecular evolution analyses. IDEA's graphical input and visualization interfaces eliminate the need to edit and parse text input and output files, reducing the likelihood of errors and improving processing time. Further, its interactive output display gives the user immediate access to results. Finally, IDEA can process data in parallel on a local machine or computing grid, allowing genome-wide analyses to be completed quickly. IDEA provides a graphical user interface that allows the user to follow a codeml or baseml analysis from parameter input through to the exploration of results. Novel options streamline the analysis process, and post-analysis visualization of phylogenies, evolutionary rates and selective constraint along protein sequences simplifies the interpretation of results. The integration of these functions into a single tool eliminates the need for lengthy data handling and parsing, significantly expediting access to global patterns in the data.

  18. IDEA: Interactive Display for Evolutionary Analyses

    Directory of Open Access Journals (Sweden)

    Carlton Jane M

    2008-12-01

    Full Text Available Abstract Background The availability of complete genomic sequences for hundreds of organisms promises to make obtaining genome-wide estimates of substitution rates, selective constraints and other molecular evolution variables of interest an increasingly important approach to addressing broad evolutionary questions. Two of the programs most widely used for this purpose are codeml and baseml, parts of the PAML (Phylogenetic Analysis by Maximum Likelihood suite. A significant drawback of these programs is their lack of a graphical user interface, which can limit their user base and considerably reduce their efficiency. Results We have developed IDEA (Interactive Display for Evolutionary Analyses, an intuitive graphical input and output interface which interacts with PHYLIP for phylogeny reconstruction and with codeml and baseml for molecular evolution analyses. IDEA's graphical input and visualization interfaces eliminate the need to edit and parse text input and output files, reducing the likelihood of errors and improving processing time. Further, its interactive output display gives the user immediate access to results. Finally, IDEA can process data in parallel on a local machine or computing grid, allowing genome-wide analyses to be completed quickly. Conclusion IDEA provides a graphical user interface that allows the user to follow a codeml or baseml analysis from parameter input through to the exploration of results. Novel options streamline the analysis process, and post-analysis visualization of phylogenies, evolutionary rates and selective constraint along protein sequences simplifies the interpretation of results. The integration of these functions into a single tool eliminates the need for lengthy data handling and parsing, significantly expediting access to global patterns in the data.

  19. Bayesian uncertainty analyses of probabilistic risk models

    International Nuclear Information System (INIS)

    Pulkkinen, U.

    1989-01-01

    Applications of Bayesian principles to the uncertainty analyses are discussed in the paper. A short review of the most important uncertainties and their causes is provided. An application of the principle of maximum entropy to the determination of Bayesian prior distributions is described. An approach based on so called probabilistic structures is presented in order to develop a method of quantitative evaluation of modelling uncertainties. The method is applied to a small example case. Ideas for application areas for the proposed method are discussed

  20. Safety analyses for high-temperature reactors

    International Nuclear Information System (INIS)

    Mueller, A.

    1978-01-01

    The safety evaluation of HTRs may be based on the three methods presented here: The licensing procedure, the probabilistic risk analysis, and the damage extent analysis. Thereby all safety aspects - from normal operation to the extreme (hypothetical) accidents - of the HTR are covered. The analyses within the licensing procedure of the HTR-1160 have shown that for normal operation and for the design basis accidents the radiation exposures remain clearly below the maximum permissible levels as prescribed by the radiation protection ordinance, so that no real hazard for the population will avise from them. (orig./RW) [de

  1. Introduction: Analysing Emotion and Theorising Affect

    Directory of Open Access Journals (Sweden)

    Peta Tait

    2016-08-01

    Full Text Available This discussion introduces ideas of emotion and affect for a volume of articles demonstrating the scope of approaches used in their study within the humanities and creative arts. The volume offers multiple perspectives on emotion and affect within 20th-century and 21st-century texts, arts and organisations and their histories. The discussion explains how emotion encompasses the emotions, emotional feeling, sensation and mood and how these can be analysed particularly in relation to literature, art and performance. It briefly summarises concepts of affect theory within recent approaches before introducing the articles.

  2. Applications of neural network to numerical analyses

    International Nuclear Information System (INIS)

    Takeda, Tatsuoki; Fukuhara, Makoto; Ma, Xiao-Feng; Liaqat, Ali

    1999-01-01

    Applications of a multi-layer neural network to numerical analyses are described. We are mainly concerned with the computed tomography and the solution of differential equations. In both cases as the objective functions for the training process of the neural network we employed residuals of the integral equation or the differential equations. This is different from the conventional neural network training where sum of the squared errors of the output values is adopted as the objective function. For model problems both the methods gave satisfactory results and the methods are considered promising for some kind of problems. (author)

  3. Komparativ analyse - Scandinavian Airlines & Norwegian Air Shuttle

    OpenAIRE

    Kallesen, Martin Nystrup; Singh, Ravi Pal; Boesen, Nana Wiaberg

    2017-01-01

    The project is based around a pondering of how that a company the size of Scandinavian Airlines or Norwegian Air Shuttle use their Finances and how they see their external environment. This has led to us researching the relationship between the companies and their finances as well as their external environment, and how they differ in both.To do this we have utilised a myriad of different methods to analyse the companies, including PESTEL, SWOT, TOWS; DCF, risk analysis, Sensitivity, Porter’s ...

  4. Implementing partnerships in nonreactor facility safety analyses

    International Nuclear Information System (INIS)

    Courtney, J.C.; Perry, W.H.; Phipps, R.D.

    1996-01-01

    Faculty and students from LSU have been participating in nuclear safety analyses and radiation protection projects at ANL-W at INEL since 1973. A mutually beneficial relationship has evolved that has resulted in generation of safety-related studies acceptable to Argonne and DOE, NRC, and state regulatory groups. Most of the safety projects have involved the Hot Fuel Examination Facility or the Fuel Conditioning Facility; both are hot cells that receive spent fuel from EBR-II. A table shows some of the major projects at ANL-W that involved LSU students and faculty

  5. Cost/benefit analyses of environmental impact

    International Nuclear Information System (INIS)

    Goldman, M.I.

    1974-01-01

    Various aspects of cost-benefit analyses are considered. Some topics discussed are: regulations of the National Environmental Policy Act (NEPA); statement of AEC policy and procedures for implementation of NEPA; Calvert Cliffs decision; AEC Regulatory Guide; application of risk-benefit analysis to nuclear power; application of the as low as practicable (ALAP) rule to radiation discharges; thermal discharge restrictions proposed by EPA under the 1972 Amendment to the Water Pollution Control Act; estimates of somatic and genetic insult per unit population exposure; occupational exposure; EPA Point Source Guidelines for Discharges from Steam Electric Power Plants; and costs of closed-cycle cooling using cooling towers. (U.S.)

  6. The phaco machine: analysing new technology.

    Science.gov (United States)

    Fishkind, William J

    2013-01-01

    The phaco machine is frequently overlooked as the crucial surgical instrument it is. Understanding how to set parameters is initiated by understanding fundamental concepts of machine function. This study analyses the critical concepts of partial occlusion phaco, occlusion phaco and pump technology. In addition, phaco energy categories as well as variations of phaco energy production are explored. Contemporary power modulations and pump controls allow for the enhancement of partial occlusion phacoemulsification. These significant changes in the anterior chamber dynamics produce a balanced environment for phaco; less complications; and improved patient outcomes.

  7. Nuclear analyses of the Pietroasa gold hoard

    International Nuclear Information System (INIS)

    Cojocaru, V.; Besliu, C.

    1999-01-01

    By means of nuclear analyses the concentrations of Au, Ag, Cu, Ir, Os, Pt, Co and Hg were measured in the 12 artifacts of the gold hoard discovered in 1837 at Pietroasa, Buzau country in Romania. The concentrations of the first four elements were used to compare different stylistic groups assumed by historians. Comparisons with gold nuggets from the old Dacian territory and gold Roman imperial coins were also made. A good agreement was found with the oldest hypothesis which considers that the hoard is represented by three styles appropriated mainly by the Goths. (author)

  8. An evaluation of the Olympus "Quickrate" analyser.

    Science.gov (United States)

    Williams, D G; Wood, R J; Worth, H G

    1979-02-01

    The Olympus "Quickrate", a photometer built for both kinetic and end point analysis was evaluated in this laboratory. Aspartate transaminase, lactate dehydrogenase, hydroxybutyrate dehydrogenase, creatine kinase, alkaline phosphatase and gamma glutamyl transpeptidase were measured in the kinetic mode and glucose, urea, total protein, albumin, bilirubin, calcium and iron in the end point mode. Overall, good correlation was observed with routine methodologies and the precision of the methods was acceptable. An electrical evaluation was also performed. In our hands, the instrument proved to be simple to use and gave no trouble. It should prove useful for paediatric and emergency work, and as a back up for other analysers.

  9. Analyses of containment structures with corrosion damage

    International Nuclear Information System (INIS)

    Cherry, J.L.

    1997-01-01

    Corrosion damage that has been found in a number of nuclear power plant containment structures can degrade the pressure capacity of the vessel. This has prompted concerns regarding the capacity of corroded containments to withstand accident loadings. To address these concerns, finite element analyses have been performed for a typical PWR Ice Condenser containment structure. Using ABAQUS, the pressure capacity was calculated for a typical vessel with no corrosion damage. Multiple analyses were then performed with the location of the corrosion and the amount of corrosion varied in each analysis. Using a strain-based failure criterion, a open-quotes lower boundclose quotes, open-quotes best estimateclose quotes, and open-quotes upper boundclose quotes failure level was predicted for each case. These limits were established by: determining the amount of variability that exists in material properties of typical containments, estimating the amount of uncertainty associated with the level of modeling detail and modeling assumptions, and estimating the effect of corrosion on the material properties

  10. Analyser Framework to Verify Software Components

    Directory of Open Access Journals (Sweden)

    Rolf Andreas Rasenack

    2009-01-01

    Full Text Available Today, it is important for software companies to build software systems in a short time-interval, to reduce costs and to have a good market position. Therefore well organized and systematic development approaches are required. Reusing software components, which are well tested, can be a good solution to develop software applications in effective manner. The reuse of software components is less expensive and less time consuming than a development from scratch. But it is dangerous to think that software components can be match together without any problems. Software components itself are well tested, of course, but even if they composed together problems occur. Most problems are based on interaction respectively communication. Avoiding such errors a framework has to be developed for analysing software components. That framework determines the compatibility of corresponding software components. The promising approach discussed here, presents a novel technique for analysing software components by applying an Abstract Syntax Language Tree (ASLT. A supportive environment will be designed that checks the compatibility of black-box software components. This article is concerned to the question how can be coupled software components verified by using an analyzer framework and determines the usage of the ASLT. Black-box Software Components and Abstract Syntax Language Tree are the basis for developing the proposed framework and are discussed here to provide the background knowledge. The practical implementation of this framework is discussed and shows the result by using a test environment.

  11. Passive safety injection experiments and analyses (PAHKO)

    International Nuclear Information System (INIS)

    Tuunanen, J.

    1998-01-01

    PAHKO project involved experiments on the PACTEL facility and computer simulations of selected experiments. The experiments focused on the performance of Passive Safety Injection Systems (PSIS) of Advanced Light Water Reactors (ALWRs) in Small Break Loss-Of-Coolant Accident (SBLOCA) conditions. The PSIS consisted of a Core Make-up Tank (CMT) and two pipelines (Pressure Balancing Line, PBL, and Injection Line, IL). The examined PSIS worked efficiently in SBLOCAs although the flow through the PSIS stopped temporarily if the break was very small and the hot water filled the CMT. The experiments demonstrated the importance of the flow distributor in the CMT to limit rapid condensation. The project included validation of three thermal-hydraulic computer codes (APROS, CATHARE and RELAP5). The analyses showed the codes are capable to simulate the overall behaviour of the transients. The detailed analyses of the results showed some models in the codes still need improvements. Especially, further development of models for thermal stratification, condensation and natural circulation flow with small driving forces would be necessary for accurate simulation of the PSIS phenomena. (orig.)

  12. Used Fuel Management System Interface Analyses - 13578

    Energy Technology Data Exchange (ETDEWEB)

    Howard, Robert; Busch, Ingrid [Oak Ridge National Laboratory, P.O. Box 2008, Bldg. 5700, MS-6170, Oak Ridge, TN 37831 (United States); Nutt, Mark; Morris, Edgar; Puig, Francesc [Argonne National Laboratory (United States); Carter, Joe; Delley, Alexcia; Rodwell, Phillip [Savannah River National Laboratory (United States); Hardin, Ernest; Kalinina, Elena [Sandia National Laboratories (United States); Clark, Robert [U.S. Department of Energy (United States); Cotton, Thomas [Complex Systems Group (United States)

    2013-07-01

    Preliminary system-level analyses of the interfaces between at-reactor used fuel management, consolidated storage facilities, and disposal facilities, along with the development of supporting logistics simulation tools, have been initiated to provide the U.S. Department of Energy (DOE) and other stakeholders with information regarding the various alternatives for managing used nuclear fuel (UNF) generated by the current fleet of light water reactors operating in the United States. An important UNF management system interface consideration is the need for ultimate disposal of UNF assemblies contained in waste packages that are sized to be compatible with different geologic media. Thermal analyses indicate that waste package sizes for the geologic media under consideration by the Used Fuel Disposition Campaign may be significantly smaller than the canisters being used for on-site dry storage by the nuclear utilities. Therefore, at some point along the UNF disposition pathway, there could be a need to repackage fuel assemblies already loaded and being loaded into the dry storage canisters currently in use. The implications of where and when the packaging or repackaging of commercial UNF will occur are key questions being addressed in this evaluation. The analysis demonstrated that thermal considerations will have a major impact on the operation of the system and that acceptance priority, rates, and facility start dates have significant system implications. (authors)

  13. Sensitivity in risk analyses with uncertain numbers.

    Energy Technology Data Exchange (ETDEWEB)

    Tucker, W. Troy; Ferson, Scott

    2006-06-01

    Sensitivity analysis is a study of how changes in the inputs to a model influence the results of the model. Many techniques have recently been proposed for use when the model is probabilistic. This report considers the related problem of sensitivity analysis when the model includes uncertain numbers that can involve both aleatory and epistemic uncertainty and the method of calculation is Dempster-Shafer evidence theory or probability bounds analysis. Some traditional methods for sensitivity analysis generalize directly for use with uncertain numbers, but, in some respects, sensitivity analysis for these analyses differs from traditional deterministic or probabilistic sensitivity analyses. A case study of a dike reliability assessment illustrates several methods of sensitivity analysis, including traditional probabilistic assessment, local derivatives, and a ''pinching'' strategy that hypothetically reduces the epistemic uncertainty or aleatory uncertainty, or both, in an input variable to estimate the reduction of uncertainty in the outputs. The prospects for applying the methods to black box models are also considered.

  14. Fractal and multifractal analyses of bipartite networks

    Science.gov (United States)

    Liu, Jin-Long; Wang, Jian; Yu, Zu-Guo; Xie, Xian-Hua

    2017-03-01

    Bipartite networks have attracted considerable interest in various fields. Fractality and multifractality of unipartite (classical) networks have been studied in recent years, but there is no work to study these properties of bipartite networks. In this paper, we try to unfold the self-similarity structure of bipartite networks by performing the fractal and multifractal analyses for a variety of real-world bipartite network data sets and models. First, we find the fractality in some bipartite networks, including the CiteULike, Netflix, MovieLens (ml-20m), Delicious data sets and (u, v)-flower model. Meanwhile, we observe the shifted power-law or exponential behavior in other several networks. We then focus on the multifractal properties of bipartite networks. Our results indicate that the multifractality exists in those bipartite networks possessing fractality. To capture the inherent attribute of bipartite network with two types different nodes, we give the different weights for the nodes of different classes, and show the existence of multifractality in these node-weighted bipartite networks. In addition, for the data sets with ratings, we modify the two existing algorithms for fractal and multifractal analyses of edge-weighted unipartite networks to study the self-similarity of the corresponding edge-weighted bipartite networks. The results show that our modified algorithms are feasible and can effectively uncover the self-similarity structure of these edge-weighted bipartite networks and their corresponding node-weighted versions.

  15. Special analyses reveal coke-deposit structure

    International Nuclear Information System (INIS)

    Albright, L.F.

    1988-01-01

    A scanning electron microscope (SEM) and an energy dispersive X-ray analyzer (EDAX) have been used to obtain information that clarifies the three mechanisms of coke formation in ethylene furnaces, and to analyze the metal condition at the exit of furnace. The results can be used to examine furnace operations and develop improved ethylene plant practices. In this first of four articles on the analyses of coke and metal samples, the coking mechanisms and coke deposits in a section of tube from an actual ethylene furnace (Furnace A) from a plant on the Texas Gulf Coast are discussed. The second articles in the series will analyze the condition of the tube metal in the same furnace. To show how coke deposition and metal condition dependent on the operating parameters of an ethylene furnace, the third article in the series will show the coke deposition in a Texas Gulf Coast furnace tube (Furnace B) that operated at shorter residence time. The fourth article discusses the metal condition in that furnace. Some recommendations, based on the analyses and findings, are offered in the fourth article that could help extend the life of ethylene furnace tubes, and also improve overall ethylene plant operations

  16. Overview of cooperative international piping benchmark analyses

    International Nuclear Information System (INIS)

    McAfee, W.J.

    1982-01-01

    This paper presents an overview of an effort initiated in 1976 by the International Working Group on Fast Reactors (IWGFR) of the International Atomic Energy Agency (IAEA) to evaluate detailed and simplified inelastic analysis methods for piping systems with particular emphasis on piping bends. The procedure was to collect from participating member IAEA countries descriptions of tests and test results for piping systems or bends (with emphasis on high temperature inelastic tests), to compile, evaluate, and issue a selected number of these problems for analysis, and to compile and make a preliminary evaluation of the analyses results. Of the problem descriptions submitted three were selected to be used: a 90 0 -elbow at 600 0 C with an in-plane transverse force; a 90 0 -elbow with an in-plane moment; and a 180 0 -elbow at room temperature with a reversed, cyclic, in-plane transverse force. A variety of both detailed and simplified analysis solutions were obtained. A brief comparative assessment of the analyses is contained in this paper. 15 figures

  17. Ethics of cost analyses in medical education.

    Science.gov (United States)

    Walsh, Kieran

    2013-11-01

    Cost analyses in medical education are rarely straightforward, and rarely lead to clear-cut conclusions. Occasionally they do lead to clear conclusions but even when that happens, some stakeholders will ask difficult but valid questions about what to do following cost analyses-specifically about distributive justice in the allocation of resources. At present there are few or no debates about these issues and rationing decisions that are taken in medical education are largely made subconsciously. Distributive justice 'concerns the nature of a socially just allocation of goods in a society'. Inevitably there is a large degree of subjectivity in the judgment as to whether an allocation is seen as socially just or ethical. There are different principles by which we can view distributive justice and which therefore affect the prism of subjectivity through which we see certain problems. For example, we might say that distributive justice at a certain institution or in a certain medical education system operates according to the principle that resources must be divided equally amongst learners. Another system may say that resources should be distributed according to the needs of learners or even of patients. No ethical system or model is inherently right or wrong, they depend on the context in which the educator is working.

  18. Production of mRNA cytokines in BALB/c mice infected with Paracoccidioides brasiliensis and analyses of the results by image processing; Producao de interleucinas RNAm em camundongos BALB/c infectados por Paracoccidioides brasiliensis, com analises dos resultados atraves de processamento de imagens

    Energy Technology Data Exchange (ETDEWEB)

    Januario, Adriana; Pietro, Rosemeire C.L. Rodrigues; Silva, Celio L. [Sao Paulo Univ., Ribeirao Preto, SP (Brazil). Faculdade de Medicina. Dept. de Parasitologia, Microbiologia e Imunologia; Rodrigues, Evandro L.L.; Franca, Celso A. de [Sao Paulo Univ., Sao Carlos, SP (Brazil). Escola de Engenharia. Dept. de Engenharia Eletrica

    1996-12-31

    The production of mRNA cytokines in BALB/c mice infected with Paracoccidioides brasiliensis is studied. It is reported that in the beginning of the disease with P. brasiliensis stimulated mice showed an analogous production between IL-2 and IL-10 mRNA, however, there is a predominance of IL-2 mRNA in the lung and of IL-10 mRNA in the liver cells. In this model, there is a dynamic change in the levels of IL-2 and IL-10 mRNA, suggesting the presence of both CD4+ T helper cells 7 refs., 6 figs.

  19. Radiometric analysis performed by the Environment Monitoring Service from IPEN (Institute of Energy and Nuclear Research), Brazil, between 1988 and 1991; Analises radiometricas realizadas pelo Servico de Monitoracao Ambiental do IPEN de 1988 a 1991

    Energy Technology Data Exchange (ETDEWEB)

    Venturini, L; Nisti, M B; Pecequilo, B R.S.

    1993-03-01

    This report presents the radiometric analyses made by the Environmental Monitoring Service from the Institute of Energy and Nuclear Research (IPEN), Brazil, in the period 1988-1991. The experimental procedures, the products analysed and their respective quantities are described. (F.E.). 11 refs, 3 tabs.

  20. Pathway analyses implicate glial cells in schizophrenia.

    Directory of Open Access Journals (Sweden)

    Laramie E Duncan

    Full Text Available The quest to understand the neurobiology of schizophrenia and bipolar disorder is ongoing with multiple lines of evidence indicating abnormalities of glia, mitochondria, and glutamate in both disorders. Despite high heritability estimates of 81% for schizophrenia and 75% for bipolar disorder, compelling links between findings from neurobiological studies, and findings from large-scale genetic analyses, are only beginning to emerge.Ten publically available gene sets (pathways related to glia, mitochondria, and glutamate were tested for association to schizophrenia and bipolar disorder using MAGENTA as the primary analysis method. To determine the robustness of associations, secondary analyses were performed with: ALIGATOR, INRICH, and Set Screen. Data from the Psychiatric Genomics Consortium (PGC were used for all analyses. There were 1,068,286 SNP-level p-values for schizophrenia (9,394 cases/12,462 controls, and 2,088,878 SNP-level p-values for bipolar disorder (7,481 cases/9,250 controls.The Glia-Oligodendrocyte pathway was associated with schizophrenia, after correction for multiple tests, according to primary analysis (MAGENTA p = 0.0005, 75% requirement for individual gene significance and also achieved nominal levels of significance with INRICH (p = 0.0057 and ALIGATOR (p = 0.022. For bipolar disorder, Set Screen yielded nominally and method-wide significant associations to all three glial pathways, with strongest association to the Glia-Astrocyte pathway (p = 0.002.Consistent with findings of white matter abnormalities in schizophrenia by other methods of study, the Glia-Oligodendrocyte pathway was associated with schizophrenia in our genomic study. These findings suggest that the abnormalities of myelination observed in schizophrenia are at least in part due to inherited factors, contrasted with the alternative of purely environmental causes (e.g. medication effects or lifestyle. While not the primary purpose of our study

  1. DEPUTY: analysing architectural structures and checking style

    International Nuclear Information System (INIS)

    Gorshkov, D.; Kochelev, S.; Kotegov, S.; Pavlov, I.; Pravilnikov, V.; Wellisch, J.P.

    2001-01-01

    The DepUty (dependencies utility) can be classified as a project and process management tool. The main goal of DepUty is to assist by means of source code analysis and graphical representation using UML, in understanding dependencies of sub-systems and packages in CMS Object Oriented software, to understand architectural structure, and to schedule code release in modularised integration. It also allows a new-comer to more easily understand the global structure of CMS software, and to void circular dependencies up-front or re-factor the code, in case it was already too close to the edge of non-maintainability. The authors will discuss the various views DepUty provides to analyse package dependencies, and illustrate both the metrics and style checking facilities it provides

  2. Response surface use in safety analyses

    International Nuclear Information System (INIS)

    Prosek, A.

    1999-01-01

    When thousands of complex computer code runs related to nuclear safety are needed for statistical analysis, the response surface is used to replace the computer code. The main purpose of the study was to develop and demonstrate a tool called optimal statistical estimator (OSE) intended for response surface generation of complex and non-linear phenomena. The performance of optimal statistical estimator was tested by the results of 59 different RELAP5/MOD3.2 code calculations of the small-break loss-of-coolant accident in a two loop pressurized water reactor. The results showed that OSE adequately predicted the response surface for the peak cladding temperature. Some good characteristic of the OSE like monotonic function between two neighbor points and independence on the number of output parameters suggest that OSE can be used for response surface generation of any safety or system parameter in the thermal-hydraulic safety analyses.(author)

  3. Spatial Analyses of Harappan Urban Settlements

    Directory of Open Access Journals (Sweden)

    Hirofumi Teramura

    2006-12-01

    Full Text Available The Harappan Civilization occupies a unique place among the early civilizations of the world with its well planned urban settlements, advanced handicraft and technology, religious and trade activities. Using a Geographical Information Systems (GIS, this study presents spatial analyses that locate urban settlements on a digital elevation model (DEM according to the three phases of early, mature and late. Understanding the relationship between the spatial distribution of Harappan sites and the change in some factors, such as topographic features, river passages or sea level changes, will lead to an understanding of the dynamism of this civilization. It will also afford a glimpse of the factors behind the formation, development, and decline of the Harappan Civilization.

  4. The plant design analyser and its applications

    International Nuclear Information System (INIS)

    Whitmarsh-Everiss, M.J.

    1992-01-01

    Consideration is given to the history of computational methods for the non-linear dynamic analysis of plant behaviour. This is traced from analogue to hybrid computers. When these were phased out simulation languages were used in the batch mode and the interactive computational capabilities were lost. These have subsequently been recovered using mainframe computing architecture in the context of small models using the Prototype Plant Design Analyser. Given the development of parallel processing architectures, the restriction on model size can be lifted. This capability and the use of advanced Work Stations and graphics software has enabled an advanced interactive design environment to be developed. This system is generic and can be used, with suitable graphics development, to study the dynamics and control behaviour of any plant or system for minimum cost. Examples of past and possible future uses are identified. (author)

  5. Abundance analyses of thirty cool carbon stars

    International Nuclear Information System (INIS)

    Utsumi, Kazuhiko

    1985-01-01

    The results were previously obtained by use of the absolute gf-values and the cosmic abundance as a standard. These gf-values were found to contain large systematic errors, and as a result, the solar photospheric abundances were revised. Our previous results, therefore, must be revised by using new gf-values, and abundance analyses are extended for as many carbon stars as possible. In conclusion, in normal cool carbon stars heavy metals are overabundant by factors of 10 - 100 and rare-earth elements are overabundant by a factor of about 10, and in J-type cool carbon stars, C 12 /C 13 ratio is smaller, C 2 and CN bands and Li 6708 are stronger than in normal cool carbon stars, and the abundances of s-process elements with respect to Fe are nearly normal. (Mori, K.)

  6. Analysing Medieval Urban Space; a methodology

    Directory of Open Access Journals (Sweden)

    Marlous L. Craane MA

    2007-08-01

    Full Text Available This article has been written in reaction to recent developments in medieval history and archaeology, to study not only the buildings in a town but also the spaces that hold them together. It discusses a more objective and interdisciplinary approach for analysing urban morphology and use of space. It proposes a 'new' methodology by combining town plan analysis and space syntax. This methodology was trialled on the city of Utrecht in the Netherlands. By comparing the results of this 'new' methodology with the results of previous, more conventional, research, this article shows that space syntax can be applied successfully to medieval urban contexts. It does this by demonstrating a strong correlation between medieval economic spaces and the most integrated spaces, just as is found in the study of modern urban environments. It thus provides a strong basis for the use of this technique in future research of medieval urban environments.

  7. Reliability and safety analyses under fuzziness

    International Nuclear Information System (INIS)

    Onisawa, T.; Kacprzyk, J.

    1995-01-01

    Fuzzy theory, for example possibility theory, is compatible with probability theory. What is shown so far is that probability theory needs not be replaced by fuzzy theory, but rather that the former works much better in applications if it is combined with the latter. In fact, it is said that there are two essential uncertainties in the field of reliability and safety analyses: One is a probabilistic uncertainty which is more relevant for mechanical systems and the natural environment, and the other is fuzziness (imprecision) caused by the existence of human beings in systems. The classical probability theory alone is therefore not sufficient to deal with uncertainties in humanistic system. In such a context this collection of works will put a milestone in the arguments of probability theory and fuzzy theory. This volume covers fault analysis, life time analysis, reliability, quality control, safety analysis and risk analysis. (orig./DG). 106 figs

  8. Precise Chemical Analyses of Planetary Surfaces

    Science.gov (United States)

    Kring, David; Schweitzer, Jeffrey; Meyer, Charles; Trombka, Jacob; Freund, Friedemann; Economou, Thanasis; Yen, Albert; Kim, Soon Sam; Treiman, Allan H.; Blake, David; hide

    1996-01-01

    We identify the chemical elements and element ratios that should be analyzed to address many of the issues identified by the Committee on Planetary and Lunar Exploration (COMPLEX). We determined that most of these issues require two sensitive instruments to analyze the necessary complement of elements. In addition, it is useful in many cases to use one instrument to analyze the outermost planetary surface (e.g. to determine weathering effects), while a second is used to analyze a subsurface volume of material (e.g., to determine the composition of unaltered planetary surface material). This dual approach to chemical analyses will also facilitate the calibration of orbital and/or Earth-based spectral observations of the planetary body. We determined that in many cases the scientific issues defined by COMPLEX can only be fully addressed with combined packages of instruments that would supplement the chemical data with mineralogic or visual information.

  9. Seismic analyses of structures. 1st draft

    International Nuclear Information System (INIS)

    David, M.

    1995-01-01

    The dynamic analysis presented in this paper refers to the seismic analysis of the main building of Paks NPP. The aim of the analysis was to determine the floor response spectra as response to seismic input. This analysis was performed by the 3-dimensional calculation model and the floor response spectra were determined for a number levels from the floor response time histories and no other adjustments were applied. The following results of seismic analysis are presented: 3-dimensional finite element model; basic assumptions of dynamic analyses; table of frequencies and included factors; modal masses for all modes; floor response spectra in all the selected nodes with figures of indicated nodes and important nodes of free vibration

  10. Analysing Terrorism from a Systems Thinking Perspective

    Directory of Open Access Journals (Sweden)

    Lukas Schoenenberger

    2014-02-01

    Full Text Available Given the complexity of terrorism, solutions based on single factors are destined to fail. Systems thinking offers various tools for helping researchers and policy makers comprehend terrorism in its entirety. We have developed a semi-quantitative systems thinking approach for characterising relationships between variables critical to terrorism and their impact on the system as a whole. For a better understanding of the mechanisms underlying terrorism, we present a 16-variable model characterising the critical components of terrorism and perform a series of highly focused analyses. We show how to determine which variables are best suited for government intervention, describing in detail their effects on the key variable—the political influence of a terrorist network. We also offer insights into how to elicit variables that destabilise and ultimately break down these networks. Because we clarify our novel approach with fictional data, the primary importance of this paper lies in the new framework for reasoning that it provides.

  11. Seismic analyses of structures. 1st draft

    Energy Technology Data Exchange (ETDEWEB)

    David, M [David Consulting, Engineering and Design Office (Czech Republic)

    1995-07-01

    The dynamic analysis presented in this paper refers to the seismic analysis of the main building of Paks NPP. The aim of the analysis was to determine the floor response spectra as responseto seismic input. This analysis was performed by the 3-dimensional calculation model and the floor response spectra were determined for a number levels from the floor response time histories and no other adjustments were applied. The following results of seismic analysis are presented: 3-dimensional finite element model; basic assumptions of dynamic analyses; table of frequencies and included factors; modal masses for all modes; floor response spectra in all the selected nodes with figures of indicated nodes and important nodes of free vibration.

  12. Project analysis and integration economic analyses summary

    Science.gov (United States)

    Macomber, H. L.

    1986-01-01

    An economic-analysis summary was presented for the manufacture of crystalline-silicon modules involving silicon ingot/sheet, growth, slicing, cell manufacture, and module assembly. Economic analyses provided: useful quantitative aspects for complex decision-making to the Flat-plate Solar Array (FSA) Project; yardsticks for design and performance to industry; and demonstration of how to evaluate and understand the worth of research and development both to JPL and other government agencies and programs. It was concluded that future research and development funds for photovoltaics must be provided by the Federal Government because the solar industry today does not reap enough profits from its present-day sales of photovoltaic equipment.

  13. Level 2 probabilistic event analyses and quantification

    International Nuclear Information System (INIS)

    Boneham, P.

    2003-01-01

    In this paper an example of quantification of a severe accident phenomenological event is given. The performed analysis for assessment of the probability that the debris released from the reactor vessel was in a coolable configuration in the lower drywell is presented. It is also analysed the assessment of the type of core/concrete attack that would occur. The coolability of the debris ex-vessel evaluation by an event in the Simplified Boiling Water Reactor (SBWR) Containment Event Tree (CET) and a detailed Decomposition Event Tree (DET) developed to aid in the quantification of this CET event are considered. The headings in the DET selected to represent plant physical states (e.g., reactor vessel pressure at the time of vessel failure) and the uncertainties associated with the occurrence of critical physical phenomena (e.g., debris configuration in the lower drywell) considered important to assessing whether the debris was coolable or not coolable ex-vessel are also discussed

  14. Externalizing Behaviour for Analysing System Models

    DEFF Research Database (Denmark)

    Ivanova, Marieta Georgieva; Probst, Christian W.; Hansen, René Rydhof

    2013-01-01

    System models have recently been introduced to model organisations and evaluate their vulnerability to threats and especially insider threats. Especially for the latter these models are very suitable, since insiders can be assumed to have more knowledge about the attacked organisation than outside...... attackers. Therefore, many attacks are considerably easier to be performed for insiders than for outsiders. However, current models do not support explicit specification of different behaviours. Instead, behaviour is deeply embedded in the analyses supported by the models, meaning that it is a complex......, if not impossible task to change behaviours. Especially when considering social engineering or the human factor in general, the ability to use different kinds of behaviours is essential. In this work we present an approach to make the behaviour a separate component in system models, and explore how to integrate...

  15. ATLAS helicity analyses in beauty hadron decays

    CERN Document Server

    Smizanska, M

    2000-01-01

    The ATLAS detector will allow a precise spatial reconstruction of the kinematics of B hadron decays. In combination with the efficient lepton identification applied already at trigger level, ATLAS is expected to provide large samples of exclusive decay channels cleanly separable from background. These data sets will allow spin-dependent analyses leading to the determination of production and decay parameters, which are not accessible if the helicity amplitudes are not separated. Measurement feasibility studies for decays B/sub s //sup 0/ to J/ psi phi and Lambda /sub b//sup 0/ to Lambda J/ psi , presented in this document, show the experimental precisions that can be achieved in determination of B/sub s//sup 0/ and Lambda /sub b //sup 0/ characteristics. (19 refs).

  16. Thermal hydraulic reactor safety analyses and experiments

    International Nuclear Information System (INIS)

    Holmstroem, H.; Eerikaeinen, L.; Kervinen, T.; Kilpi, K.; Mattila, L.; Miettinen, J.; Yrjoelae, V.

    1989-04-01

    The report introduces the results of the thermal hydraulic reactor safety research performed in the Nuclear Engineering Laboratory of the Technical Research Centre of Finland (VTT) during the years 1972-1987. Also practical applications i.e. analyses for the safety authorities and power companies are presented. The emphasis is on description of the state-of-the-art know how. The report describes VTT's most important computer codes, both those of foreign origin and those developed at VTT, and their assessment work, VTT's own experimental research, as well as international experimental projects and other forms of cooperation VTT has participated in. Appendix 8 contains a comprehensive list of the most important publications and technical reports produced. They present the content and results of the research in detail.(orig.)

  17. Digital analyses of cartometric Fruska Gora guidelines

    Directory of Open Access Journals (Sweden)

    Živković Dragica

    2013-01-01

    Full Text Available Modern geo morphological topography research have been using quantity statistic and cartographic methods for topographic relief features, mutual relief features, mutual connection analyses on the grounds of good quality numeric parameters etc. Topographic features are important for topographic activities are important for important natural activities. Important morphological characteristics are precisely at the angle of topography, hypsometry, and topography exposition and so on. Small yet unknown relief slants can deeply affect land configuration, hypsometry, topographic exposition etc. Expositions modify the light and heat of interconnected phenomena: soil and air temperature, soil disintegration, the length of vegetation period, the complexity of photosynthesis, the fruitfulness of agricultural crops, the height of snow limit etc. [Projekat Ministarstva nauke Republike Srbije, br. 176008 i br. III44006

  18. Attitude stability analyses for small artificial satellites

    International Nuclear Information System (INIS)

    Silva, W R; Zanardi, M C; Formiga, J K S; Cabette, R E S; Stuchi, T J

    2013-01-01

    The objective of this paper is to analyze the stability of the rotational motion of a symmetrical spacecraft, in a circular orbit. The equilibrium points and regions of stability are established when components of the gravity gradient torque acting on the spacecraft are included in the equations of rotational motion, which are described by the Andoyer's variables. The nonlinear stability of the equilibrium points of the rotational motion is analysed here by the Kovalev-Savchenko theorem. With the application of the Kovalev-Savchenko theorem, it is possible to verify if they remain stable under the influence of the terms of higher order of the normal Hamiltonian. In this paper, numerical simulations are made for a small hypothetical artificial satellite. Several stable equilibrium points were determined and regions around these points have been established by variations in the orbital inclination and in the spacecraft principal moment of inertia. The present analysis can directly contribute in the maintenance of the spacecraft's attitude

  19. Cointegration Approach to Analysing Inflation in Croatia

    Directory of Open Access Journals (Sweden)

    Lena Malešević-Perović

    2009-06-01

    Full Text Available The aim of this paper is to analyse the determinants of inflation in Croatia in the period 1994:6-2006:6. We use a cointegration approach and find that increases in wages positively influence inflation in the long-run. Furthermore, in the period from June 1994 onward, the depreciation of the currency also contributed to inflation. Money does not explain Croatian inflation. This irrelevance of the money supply is consistent with its endogeneity to exchange rate targeting, whereby the money supply is determined by developments in the foreign exchange market. The value of inflation in the previous period is also found to be significant, thus indicating some inflation inertia.

  20. Comprehensive immunoproteogenomic analyses of malignant pleural mesothelioma.

    Science.gov (United States)

    Lee, Hyun-Sung; Jang, Hee-Jin; Choi, Jong Min; Zhang, Jun; de Rosen, Veronica Lenge; Wheeler, Thomas M; Lee, Ju-Seog; Tu, Thuydung; Jindra, Peter T; Kerman, Ronald H; Jung, Sung Yun; Kheradmand, Farrah; Sugarbaker, David J; Burt, Bryan M

    2018-04-05

    We generated a comprehensive atlas of the immunologic cellular networks within human malignant pleural mesothelioma (MPM) using mass cytometry. Data-driven analyses of these high-resolution single-cell data identified 2 distinct immunologic subtypes of MPM with vastly different cellular composition, activation states, and immunologic function; mass spectrometry demonstrated differential abundance of MHC-I and -II neopeptides directly identified between these subtypes. The clinical relevance of this immunologic subtyping was investigated with a discriminatory molecular signature derived through comparison of the proteomes and transcriptomes of these 2 immunologic MPM subtypes. This molecular signature, representative of a favorable intratumoral cell network, was independently associated with improved survival in MPM and predicted response to immune checkpoint inhibitors in patients with MPM and melanoma. These data additionally suggest a potentially novel mechanism of response to checkpoint blockade: requirement for high measured abundance of neopeptides in the presence of high expression of MHC proteins specific for these neopeptides.

  1. Deterministic analyses of severe accident issues

    International Nuclear Information System (INIS)

    Dua, S.S.; Moody, F.J.; Muralidharan, R.; Claassen, L.B.

    2004-01-01

    Severe accidents in light water reactors involve complex physical phenomena. In the past there has been a heavy reliance on simple assumptions regarding physical phenomena alongside of probability methods to evaluate risks associated with severe accidents. Recently GE has developed realistic methodologies that permit deterministic evaluations of severe accident progression and of some of the associated phenomena in the case of Boiling Water Reactors (BWRs). These deterministic analyses indicate that with appropriate system modifications, and operator actions, core damage can be prevented in most cases. Furthermore, in cases where core-melt is postulated, containment failure can either be prevented or significantly delayed to allow sufficient time for recovery actions to mitigate severe accidents

  2. Risques naturels en montagne et analyse spatiale

    Directory of Open Access Journals (Sweden)

    Yannick Manche

    1999-06-01

    Full Text Available Le concept de risque repose sur deux notions :l'aléa, qui représente le phénomène physique par son amplitude et sa période retour ;la vulnérabilité, qui représente l'ensemble des biens et des personnes pouvant être touchés par un phénomène naturel.Le risque se définit alors comme le croisement de ces deux notions. Cette vision théorique permet de modéliser indépendamment les aléas et la vulnérabilité.Ce travail s'intéresse essentiellement à la prise en compte de la vulnérabilité dans la gestion des risques naturels. Son évaluation passe obligatoirement par une certaine analyse spatiale qui prend en compte l'occupation humaine et différentes échelles de l'utilisation de l'espace. Mais l'évaluation spatiale, que ce soit des biens et des personnes, ou des effets indirects se heurte à de nombreux problèmes. Il faut estimer l'importance de l'occupation de l'espace. Par ailleurs, le traitement des données implique des changements constants d'échelle pour passer des éléments ponctuels aux surfaces, ce que les systèmes d'information géographique ne gèrent pas parfaitement. La gestion des risques entraîne de fortes contraintes d'urbanisme, la prise en compte de la vulnérabilité permet de mieux comprendre et gérer les contraintes spatiales qu'impliquent les risques naturels. aléa, analyse spatiale, risques naturels, S.I.G., vulnérabilité

  3. Isotropy analyses of the Planck convergence map

    Science.gov (United States)

    Marques, G. A.; Novaes, C. P.; Bernui, A.; Ferreira, I. S.

    2018-01-01

    The presence of matter in the path of relic photons causes distortions in the angular pattern of the cosmic microwave background (CMB) temperature fluctuations, modifying their properties in a slight but measurable way. Recently, the Planck Collaboration released the estimated convergence map, an integrated measure of the large-scale matter distribution that produced the weak gravitational lensing (WL) phenomenon observed in Planck CMB data. We perform exhaustive analyses of this convergence map calculating the variance in small and large regions of the sky, but excluding the area masked due to Galactic contaminations, and compare them with the features expected in the set of simulated convergence maps, also released by the Planck Collaboration. Our goal is to search for sky directions or regions where the WL imprints anomalous signatures to the variance estimator revealed through a χ2 analyses at a statistically significant level. In the local analysis of the Planck convergence map, we identified eight patches of the sky in disagreement, in more than 2σ, with what is observed in the average of the simulations. In contrast, in the large regions analysis we found no statistically significant discrepancies, but, interestingly, the regions with the highest χ2 values are surrounding the ecliptic poles. Thus, our results show a good agreement with the features expected by the Λ cold dark matter concordance model, as given by the simulations. Yet, the outliers regions found here could suggest that the data still contain residual contamination, like noise, due to over- or underestimation of systematic effects in the simulation data set.

  4. The radiation analyses of ITER lower ports

    International Nuclear Information System (INIS)

    Petrizzi, L.; Brolatti, G.; Martin, A.; Loughlin, M.; Moro, F.; Villari, R.

    2010-01-01

    The ITER Vacuum Vessel has upper, equatorial, and lower ports used for equipment installation, diagnostics, heating and current drive systems, cryo-vacuum pumping, and access inside the vessel for maintenance. At the level of the divertor, the nine lower ports for remote handling, cryo-vacuum pumping and diagnostic are inclined downwards and toroidally located each every 40 o . The cryopump port has additionally a branch to allocate a second cryopump. The ports, as openings in the Vacuum Vessel, permit radiation streaming out of the vessel which affects the heating in the components in the outer regions of the machine inside and outside the ports. Safety concerns are also raised with respect to the dose after shutdown at the cryostat behind the ports: in such zones the radiation dose level must be kept below the regulatory limit to allow personnel access for maintenance purposes. Neutronic analyses have been required to qualify the ITER project related to the lower ports. A 3-D model was used to take into account full details of the ports and the lower machine surroundings. MCNP version 5 1.40 has been used with the FENDL 2.1 nuclear data library. The ITER 40 o model distributed by the ITER Organization was developed in the lower part to include the relevant details. The results of a first analysis, focused on cryopump system only, were recently published. In this paper more complete data on the cryopump port and analysis for the remote handling port and the diagnostic rack are presented; the results of both analyses give a complete map of the radiation loads in the outer divertor ports. Nuclear heating, dpa, tritium production, and dose rates after shutdown are provided and the implications for the design are discussed.

  5. Database-Driven Analyses of Astronomical Spectra

    Science.gov (United States)

    Cami, Jan

    2012-03-01

    Spectroscopy is one of the most powerful tools to study the physical properties and chemical composition of very diverse astrophysical environments. In principle, each nuclide has a unique set of spectral features; thus, establishing the presence of a specific material at astronomical distances requires no more than finding a laboratory spectrum of the right material that perfectly matches the astronomical observations. Once the presence of a substance is established, a careful analysis of the observational characteristics (wavelengths or frequencies, intensities, and line profiles) allows one to determine many physical parameters of the environment in which the substance resides, such as temperature, density, velocity, and so on. Because of this great diagnostic potential, ground-based and space-borne astronomical observatories often include instruments to carry out spectroscopic analyses of various celestial objects and events. Of particular interest is molecular spectroscopy at infrared wavelengths. From the spectroscopic point of view, molecules differ from atoms in their ability to vibrate and rotate, and quantum physics inevitably causes those motions to be quantized. The energies required to excite vibrations or rotations are such that vibrational transitions generally occur at infrared wavelengths, whereas pure rotational transitions typically occur at sub-mm wavelengths. Molecular vibration and rotation are coupled though, and thus at infrared wavelengths, one commonly observes a multitude of ro-vibrational transitions (see Figure 13.1). At lower spectral resolution, all transitions blend into one broad ro-vibrational molecular band. The isotope. Molecular spectroscopy thus allows us to see a difference of one neutron in an atomic nucleus that is located at astronomical distances! Since the detection of the first interstellar molecules (the CH [21] and CN [14] radicals), more than 150 species have been detected in space, ranging in size from diatomic

  6. High performance liquid chromatography in pharmaceutical analyses

    Directory of Open Access Journals (Sweden)

    Branko Nikolin

    2004-05-01

    Full Text Available In testing the pre-sale procedure the marketing of drugs and their control in the last ten years, high performance liquid chromatographyreplaced numerous spectroscopic methods and gas chromatography in the quantitative and qualitative analysis. In the first period of HPLC application it was thought that it would become a complementary method of gas chromatography, however, today it has nearly completely replaced gas chromatography in pharmaceutical analysis. The application of the liquid mobile phase with the possibility of transformation of mobilized polarity during chromatography and all other modifications of mobile phase depending upon the characteristics of substance which are being tested, is a great advantage in the process of separation in comparison to other methods. The greater choice of stationary phase is the next factor which enables realization of good separation. The separation line is connected to specific and sensitive detector systems, spectrafluorimeter, diode detector, electrochemical detector as other hyphernated systems HPLC-MS and HPLC-NMR, are the basic elements on which is based such wide and effective application of the HPLC method. The purpose high performance liquid chromatography(HPLC analysis of any drugs is to confirm the identity of a drug and provide quantitative results and also to monitor the progress of the therapy of a disease.1 Measuring presented on the Fig. 1. is chromatogram obtained for the plasma of depressed patients 12 h before oral administration of dexamethasone. It may also be used to further our understanding of the normal and disease process in the human body trough biomedical and therapeutically research during investigation before of the drugs registration. The analyses of drugs and metabolites in biological fluids, particularly plasma, serum or urine is one of the most demanding but one of the most common uses of high performance of liquid chromatography. Blood, plasma or

  7. High perfomance liquid chromatography in pharmaceutical analyses.

    Science.gov (United States)

    Nikolin, Branko; Imamović, Belma; Medanhodzić-Vuk, Saira; Sober, Miroslav

    2004-05-01

    In testing the pre-sale procedure the marketing of drugs and their control in the last ten years, high performance liquid chromatography replaced numerous spectroscopic methods and gas chromatography in the quantitative and qualitative analysis. In the first period of HPLC application it was thought that it would become a complementary method of gas chromatography, however, today it has nearly completely replaced gas chromatography in pharmaceutical analysis. The application of the liquid mobile phase with the possibility of transformation of mobilized polarity during chromatography and all other modifications of mobile phase depending upon the characteristics of substance which are being tested, is a great advantage in the process of separation in comparison to other methods. The greater choice of stationary phase is the next factor which enables realization of good separation. The separation line is connected to specific and sensitive detector systems, spectrafluorimeter, diode detector, electrochemical detector as other hyphernated systems HPLC-MS and HPLC-NMR, are the basic elements on which is based such wide and effective application of the HPLC method. The purpose high performance liquid chromatography (HPLC) analysis of any drugs is to confirm the identity of a drug and provide quantitative results and also to monitor the progress of the therapy of a disease.1) Measuring presented on the Fig. 1. is chromatogram obtained for the plasma of depressed patients 12 h before oral administration of dexamethasone. It may also be used to further our understanding of the normal and disease process in the human body trough biomedical and therapeutically research during investigation before of the drugs registration. The analyses of drugs and metabolites in biological fluids, particularly plasma, serum or urine is one of the most demanding but one of the most common uses of high performance of liquid chromatography. Blood, plasma or serum contains numerous endogenous

  8. Uncertainty Analyses for Back Projection Methods

    Science.gov (United States)

    Zeng, H.; Wei, S.; Wu, W.

    2017-12-01

    So far few comprehensive error analyses for back projection methods have been conducted, although it is evident that high frequency seismic waves can be easily affected by earthquake depth, focal mechanisms and the Earth's 3D structures. Here we perform 1D and 3D synthetic tests for two back projection methods, MUltiple SIgnal Classification (MUSIC) (Meng et al., 2011) and Compressive Sensing (CS) (Yao et al., 2011). We generate synthetics for both point sources and finite rupture sources with different depths, focal mechanisms, as well as 1D and 3D structures in the source region. The 3D synthetics are generated through a hybrid scheme of Direct Solution Method and Spectral Element Method. Then we back project the synthetic data using MUSIC and CS. The synthetic tests show that the depth phases can be back projected as artificial sources both in space and time. For instance, for a source depth of 10km, back projection gives a strong signal 8km away from the true source. Such bias increases with depth, e.g., the error of horizontal location could be larger than 20km for a depth of 40km. If the array is located around the nodal direction of direct P-waves the teleseismic P-waves are dominated by the depth phases. Therefore, back projections are actually imaging the reflection points of depth phases more than the rupture front. Besides depth phases, the strong and long lasted coda waves due to 3D effects near trench can lead to additional complexities tested here. The strength contrast of different frequency contents in the rupture models also produces some variations to the back projection results. In the synthetic tests, MUSIC and CS derive consistent results. While MUSIC is more computationally efficient, CS works better for sparse arrays. In summary, our analyses indicate that the impact of various factors mentioned above should be taken into consideration when interpreting back projection images, before we can use them to infer the earthquake rupture physics.

  9. Scanning electron microscopy and micro-analyses

    International Nuclear Information System (INIS)

    Brisset, F.; Repoux, L.; Ruste, J.; Grillon, F.; Robaut, F.

    2008-01-01

    Scanning electron microscopy (SEM) and the related micro-analyses are involved in extremely various domains, from the academic environments to the industrial ones. The overall theoretical bases, the main technical characteristics, and some complements of information about practical usage and maintenance are developed in this book. high-vacuum and controlled-vacuum electron microscopes are thoroughly presented, as well as the last generation of EDS (energy dispersive spectrometer) and WDS (wavelength dispersive spectrometer) micro-analysers. Beside these main topics, other analysis or observation techniques are approached, such as EBSD (electron backscattering diffraction), 3-D imaging, FIB (focussed ion beams), Monte-Carlo simulations, in-situ tests etc.. This book, in French language, is the only one which treats of this subject in such an exhaustive way. It represents the actualized and totally updated version of a previous edition of 1979. It gathers the lectures given in 2006 at the summer school of Saint Martin d'Heres (France). Content: 1 - electron-matter interactions; 2 - characteristic X-radiation, Bremsstrahlung; 3 - electron guns in SEM; 4 - elements of electronic optics; 5 - vacuum techniques; 6 - detectors used in SEM; 7 - image formation and optimization in SEM; 7a - SEM practical instructions for use; 8 - controlled pressure microscopy; 8a - applications; 9 - energy selection X-spectrometers (energy dispersive spectrometers - EDS); 9a - EDS analysis; 9b - X-EDS mapping; 10 - technological aspects of WDS; 11 - processing of EDS and WDS spectra; 12 - X-microanalysis quantifying methods; 12a - quantitative WDS microanalysis of very light elements; 13 - statistics: precision and detection limits in microanalysis; 14 - analysis of stratified samples; 15 - crystallography applied to EBSD; 16 - EBSD: history, principle and applications; 16a - EBSD analysis; 17 - Monte Carlo simulation; 18 - insulating samples in SEM and X-ray microanalysis; 18a - insulating

  10. Fuel cell power plant - a proposal for analysis of the economical viability of the implantation; Usina a celula de combustivel - uma proposta para analise da viabilidade economica de sua implantacao

    Energy Technology Data Exchange (ETDEWEB)

    Amendola, Alexandre Gomes; Rocha, Mauro Cesar da [ELETROBRAS, Rio de Janeiro, RJ (Brazil)

    2000-07-01

    The present work presents a methodology which allows a fast analyses of the economic viability of the implantation of fuel cell power plant. The paper also presents the practical application for two important concessionaires.

  11. Multichannel amplitude analyser for nuclear spectrometry

    International Nuclear Information System (INIS)

    Jankovic, S.; Milovanovic, B.

    2003-01-01

    A multichannel amplitude analyser with 4096 channels was designed. It is based on a fast 12-bit analog-to-digital converter. The intended purpose of the instrument is recording nuclear spectra by means of scintillation detectors. The computer link is established through an opto-isolated serial connection cable, thus reducing instrument sensitivity to disturbances originating from digital circuitry. Refreshing of the data displayed on the screen occurs on every 2.5 seconds. The impulse peak detection is implemented through the differentiation of the amplified input signal, while the synchronization with the data coming from the converter output is established by taking advantage of the internal 'pipeline' structure of the converter itself. The mode of operation of the built-in microcontroller provides that there are no missed impulses, and the simple logic network prevents the initiation of the amplitude reading sequence for the next impulse in case it appears shortly after its precedent. The solution proposed here demonstrated a good performance at a comparatively low manufacturing cost, and is thus suitable for educational purposes (author)

  12. Scleral topography analysed by optical coherence tomography.

    Science.gov (United States)

    Bandlitz, Stefan; Bäumer, Joachim; Conrad, Uwe; Wolffsohn, James

    2017-08-01

    A detailed evaluation of the corneo-scleral-profile (CSP) is of particular relevance in soft and scleral lenses fitting. The aim of this study was to use optical coherence tomography (OCT) to analyse the profile of the limbal sclera and to evaluate the relationship between central corneal radii, corneal eccentricity and scleral radii. Using OCT (Optos OCT/SLO; Dunfermline, Scotland, UK) the limbal scleral radii (SR) of 30 subjects (11M, 19F; mean age 23.8±2.0SD years) were measured in eight meridians 45° apart. Central corneal radii (CR) and corneal eccentricity (CE) were evaluated using the Oculus Keratograph 4 (Oculus, Wetzlar, Germany). Differences between SR in the meridians and the associations between SR and corneal topography were assessed. Median SR measured along 45° (58.0; interquartile range, 46.8-84.8mm) was significantly (ptopography and may provide additional data useful in fitting soft and scleral contact lenses. Copyright © 2017 British Contact Lens Association. Published by Elsevier Ltd. All rights reserved.

  13. Bayesian analyses of seasonal runoff forecasts

    Science.gov (United States)

    Krzysztofowicz, R.; Reese, S.

    1991-12-01

    Forecasts of seasonal snowmelt runoff volume provide indispensable information for rational decision making by water project operators, irrigation district managers, and farmers in the western United States. Bayesian statistical models and communication frames have been researched in order to enhance the forecast information disseminated to the users, and to characterize forecast skill from the decision maker's point of view. Four products are presented: (i) a Bayesian Processor of Forecasts, which provides a statistical filter for calibrating the forecasts, and a procedure for estimating the posterior probability distribution of the seasonal runoff; (ii) the Bayesian Correlation Score, a new measure of forecast skill, which is related monotonically to the ex ante economic value of forecasts for decision making; (iii) a statistical predictor of monthly cumulative runoffs within the snowmelt season, conditional on the total seasonal runoff forecast; and (iv) a framing of the forecast message that conveys the uncertainty associated with the forecast estimates to the users. All analyses are illustrated with numerical examples of forecasts for six gauging stations from the period 1971 1988.

  14. Analyses of demand response in Denmark

    International Nuclear Information System (INIS)

    Moeller Andersen, F.; Grenaa Jensen, S.; Larsen, Helge V.; Meibom, P.; Ravn, H.; Skytte, K.; Togeby, M.

    2006-10-01

    Due to characteristics of the power system, costs of producing electricity vary considerably over short time intervals. Yet, many consumers do not experience corresponding variations in the price they pay for consuming electricity. The topic of this report is: are consumers willing and able to respond to short-term variations in electricity prices, and if so, what is the social benefit of consumers doing so? Taking Denmark and the Nord Pool market as a case, the report focuses on what is known as short-term consumer flexibility or demand response in the electricity market. With focus on market efficiency, efficient allocation of resources and security of supply, the report describes demand response from a micro-economic perspective and provides empirical observations and case studies. The report aims at evaluating benefits from demand response. However, only elements contributing to an overall value are presented. In addition, the analyses are limited to benefits for society, and costs of obtaining demand response are not considered. (au)

  15. WIND SPEED AND ENERGY POTENTIAL ANALYSES

    Directory of Open Access Journals (Sweden)

    A. TOKGÖZLÜ

    2013-01-01

    Full Text Available This paper provides a case study on application of wavelet techniques to analyze wind speed and energy (renewable and environmental friendly energy. Solar and wind are main sources of energy that allows farmers to have the potential for transferring kinetic energy captured by the wind mill for pumping water, drying crops, heating systems of green houses, rural electrification's or cooking. Larger wind turbines (over 1 MW can pump enough water for small-scale irrigation. This study tried to initiate data gathering process for wavelet analyses, different scale effects and their role on wind speed and direction variations. The wind data gathering system is mounted at latitudes: 37° 50" N; longitude 30° 33" E and height: 1200 m above mean sea level at a hill near Süleyman Demirel University campus. 10 minutes average values of two levels wind speed and direction (10m and 30m above ground level have been recorded by a data logger between July 2001 and February 2002. Wind speed values changed between the range of 0 m/s and 54 m/s. Annual mean speed value is 4.5 m/s at 10 m ground level. Prevalent wind

  16. PRECLOSURE CONSEQUENCE ANALYSES FOR LICENSE APPLICATION

    Energy Technology Data Exchange (ETDEWEB)

    S. Tsai

    2005-01-12

    Radiological consequence analyses are performed for potential releases from normal operations in surface and subsurface facilities and from Category 1 and Category 2 event sequences during the preclosure period. Surface releases from normal repository operations are primarily from radionuclides released from opening a transportation cask during dry transfer operations of spent nuclear fuel (SNF) in Dry Transfer Facility 1 (DTF 1), Dry Transfer Facility 2 (DTF 2), the Canister Handling facility (CHF), or the Fuel Handling Facility (FHF). Subsurface releases from normal repository operations are from resuspension of waste package surface contamination and neutron activation of ventilated air and silica dust from host rock in the emplacement drifts. The purpose of this calculation is to demonstrate that the preclosure performance objectives, specified in 10 CFR 63.111(a) and 10 CFR 63.111(b), have been met for the proposed design and operations in the geologic repository operations area. Preclosure performance objectives are discussed in Section 6.2.3 and are summarized in Tables 1 and 2.

  17. Soil deflation analyses from wind erosion events

    Directory of Open Access Journals (Sweden)

    Lenka Lackóová

    2015-09-01

    Full Text Available There are various methods to assess soil erodibility for wind erosion. This paper focuses on aggregate analysis by a laser particle sizer ANALYSETTE 22 (FRITSCH GmbH, made to determine the size distribution of soil particles detached by wind (deflated particles. Ten soil samples, trapped along the same length of the erosion surface (150–155 m but at different wind speeds, were analysed. The soil was sampled from a flat, smooth area without vegetation cover or soil crust, not affected by the impact of windbreaks or other barriers, from a depth of maximum 2.5 cm. Prior to analysis the samples were prepared according to the relevant specifications. An experiment was also conducted using a device that enables characterisation of the vertical movement of the deflated material. The trapped samples showed no differences in particle size and the proportions of size fractions at different hourly average wind speeds. It was observed that most of particles travelling in saltation mode (size 50–500 μm – 58–70% – moved vertically up to 26 cm above the soil surface. At greater heights, particles moving in suspension mode (floating in the air; size < 100 μm accounted for up to 90% of the samples. This result suggests that the boundary between the two modes of the vertical movement of deflated soil particles lies at about 25 cm above the soil surface.

  18. Genomic analyses of modern dog breeds.

    Science.gov (United States)

    Parker, Heidi G

    2012-02-01

    A rose may be a rose by any other name, but when you call a dog a poodle it becomes a very different animal than if you call it a bulldog. Both the poodle and the bulldog are examples of dog breeds of which there are >400 recognized worldwide. Breed creation has played a significant role in shaping the modern dog from the length of his leg to the cadence of his bark. The selection and line-breeding required to maintain a breed has also reshaped the genome of the dog, resulting in a unique genetic pattern for each breed. The breed-based population structure combined with extensive morphologic variation and shared human environments have made the dog a popular model for mapping both simple and complex traits and diseases. In order to obtain the most benefit from the dog as a genetic system, it is necessary to understand the effect structured breeding has had on the genome of the species. That is best achieved by looking at genomic analyses of the breeds, their histories, and their relationships to each other.

  19. Interim Basis for PCB Sampling and Analyses

    International Nuclear Information System (INIS)

    BANNING, D.L.

    2001-01-01

    This document was developed as an interim basis for sampling and analysis of polychlorinated biphenyls (PCBs) and will be used until a formal data quality objective (DQO) document is prepared and approved. On August 31, 2000, the Framework Agreement for Management of Polychlorinated Biphenyls (PCBs) in Hanford Tank Waste was signed by the US. Department of Energy (DOE), the Environmental Protection Agency (EPA), and the Washington State Department of Ecology (Ecology) (Ecology et al. 2000). This agreement outlines the management of double shell tank (DST) waste as Toxic Substance Control Act (TSCA) PCB remediation waste based on a risk-based disposal approval option per Title 40 of the Code of Federal Regulations 761.61 (c). The agreement calls for ''Quantification of PCBs in DSTs, single shell tanks (SSTs), and incoming waste to ensure that the vitrification plant and other ancillary facilities PCB waste acceptance limits and the requirements of the anticipated risk-based disposal approval are met.'' Waste samples will be analyzed for PCBs to satisfy this requirement. This document describes the DQO process undertaken to assure appropriate data will be collected to support management of PCBs and is presented in a DQO format. The DQO process was implemented in accordance with the U.S. Environmental Protection Agency EPA QAlG4, Guidance for the Data Quality Objectives Process (EPA 1994) and the Data Quality Objectives for Sampling and Analyses, HNF-IP-0842/Rev.1 A, Vol. IV, Section 4.16 (Banning 1999)

  20. Achieving reasonable conservatism in nuclear safety analyses

    International Nuclear Information System (INIS)

    Jamali, Kamiar

    2015-01-01

    In the absence of methods that explicitly account for uncertainties, seeking reasonable conservatism in nuclear safety analyses can quickly lead to extreme conservatism. The rate of divergence to extreme conservatism is often beyond the expert analysts’ intuitive feeling, but can be demonstrated mathematically. Too much conservatism in addressing the safety of nuclear facilities is not beneficial to society. Using certain properties of lognormal distributions for representation of input parameter uncertainties, example calculations for the risk and consequence of a fictitious facility accident scenario are presented. Results show that there are large differences between the calculated 95th percentiles and the extreme bounding values derived from using all input variables at their upper-bound estimates. Showing the relationship of the mean values to the key parameters of the output distributions, the paper concludes that the mean is the ideal candidate for representation of the value of an uncertain parameter. The mean value is proposed as the metric that is consistent with the concept of reasonable conservatism in nuclear safety analysis, because its value increases towards higher percentiles of the underlying positively skewed distribution with increasing levels of uncertainty. Insensitivity of the results to the actual underlying distributions is briefly demonstrated. - Highlights: • Multiple conservative assumptions can quickly diverge into extreme conservatism. • Mathematics and attractive properties provide basis for wide use of lognormal distribution. • Mean values are ideal candidates for representation of parameter uncertainties. • Mean values are proposed as reasonably conservative estimates of parameter uncertainties

  1. CFD analyses of coolant channel flowfields

    Science.gov (United States)

    Yagley, Jennifer A.; Feng, Jinzhang; Merkle, Charles L.

    1993-01-01

    The flowfield characteristics in rocket engine coolant channels are analyzed by means of a numerical model. The channels are characterized by large length to diameter ratios, high Reynolds numbers, and asymmetrical heating. At representative flow conditions, the channel length is approximately twice the hydraulic entrance length so that fully developed conditions would be reached for a constant property fluid. For the supercritical hydrogen that is used as the coolant, the strong property variations create significant secondary flows in the cross-plane which have a major influence on the flow and the resulting heat transfer. Comparison of constant and variable property solutions show substantial differences. In addition, the property variations prevent fully developed flow. The density variation accelerates the fluid in the channels increasing the pressure drop without an accompanying increase in heat flux. Analyses of the inlet configuration suggest that side entry from a manifold can affect the development of the velocity profile because of vortices generated as the flow enters the channel. Current work is focused on studying the effects of channel bifurcation on the flow field and the heat transfer characteristics.

  2. Fast and accurate methods for phylogenomic analyses

    Directory of Open Access Journals (Sweden)

    Warnow Tandy

    2011-10-01

    Full Text Available Abstract Background Species phylogenies are not estimated directly, but rather through phylogenetic analyses of different gene datasets. However, true gene trees can differ from the true species tree (and hence from one another due to biological processes such as horizontal gene transfer, incomplete lineage sorting, and gene duplication and loss, so that no single gene tree is a reliable estimate of the species tree. Several methods have been developed to estimate species trees from estimated gene trees, differing according to the specific algorithmic technique used and the biological model used to explain differences between species and gene trees. Relatively little is known about the relative performance of these methods. Results We report on a study evaluating several different methods for estimating species trees from sequence datasets, simulating sequence evolution under a complex model including indels (insertions and deletions, substitutions, and incomplete lineage sorting. The most important finding of our study is that some fast and simple methods are nearly as accurate as the most accurate methods, which employ sophisticated statistical methods and are computationally quite intensive. We also observe that methods that explicitly consider errors in the estimated gene trees produce more accurate trees than methods that assume the estimated gene trees are correct. Conclusions Our study shows that highly accurate estimations of species trees are achievable, even when gene trees differ from each other and from the species tree, and that these estimations can be obtained using fairly simple and computationally tractable methods.

  3. Mediation Analyses in the Real World

    DEFF Research Database (Denmark)

    Lange, Theis; Starkopf, Liis

    2016-01-01

    The paper by Nguyen et al.1 published in this issue of Epidemiology presents a comparison of the recently suggested inverse odds ratio approach for addressing mediation and a more conventional Baron and Kenny-inspired method. Interestingly, the comparison is not done through a discussion of restr......The paper by Nguyen et al.1 published in this issue of Epidemiology presents a comparison of the recently suggested inverse odds ratio approach for addressing mediation and a more conventional Baron and Kenny-inspired method. Interestingly, the comparison is not done through a discussion...... it simultaneously ensures that the comparison is based on properties, which matter in actual applications, and makes the comparison accessible for a broader audience. In a wider context, the choice to stay close to real-life problems mirrors a general trend within the literature on mediation analysis namely to put...... applications using the inverse odds ration approach, as it simply has not had enough time to move from theoretical concept to published applied paper, we do expect to be able to judge the willingness of authors and journals to employ the causal inference-based approach to mediation analyses. Our hope...

  4. Reproducibility of neuroimaging analyses across operating systems.

    Science.gov (United States)

    Glatard, Tristan; Lewis, Lindsay B; Ferreira da Silva, Rafael; Adalat, Reza; Beck, Natacha; Lepage, Claude; Rioux, Pierre; Rousseau, Marc-Etienne; Sherif, Tarek; Deelman, Ewa; Khalili-Mahani, Najmeh; Evans, Alan C

    2015-01-01

    Neuroimaging pipelines are known to generate different results depending on the computing platform where they are compiled and executed. We quantify these differences for brain tissue classification, fMRI analysis, and cortical thickness (CT) extraction, using three of the main neuroimaging packages (FSL, Freesurfer and CIVET) and different versions of GNU/Linux. We also identify some causes of these differences using library and system call interception. We find that these packages use mathematical functions based on single-precision floating-point arithmetic whose implementations in operating systems continue to evolve. While these differences have little or no impact on simple analysis pipelines such as brain extraction and cortical tissue classification, their accumulation creates important differences in longer pipelines such as subcortical tissue classification, fMRI analysis, and cortical thickness extraction. With FSL, most Dice coefficients between subcortical classifications obtained on different operating systems remain above 0.9, but values as low as 0.59 are observed. Independent component analyses (ICA) of fMRI data differ between operating systems in one third of the tested subjects, due to differences in motion correction. With Freesurfer and CIVET, in some brain regions we find an effect of build or operating system on cortical thickness. A first step to correct these reproducibility issues would be to use more precise representations of floating-point numbers in the critical sections of the pipelines. The numerical stability of pipelines should also be reviewed.

  5. Activation analyses for different fusion structural alloys

    International Nuclear Information System (INIS)

    Attaya, H.; Smith, D.

    1991-01-01

    The leading candidate structural materials, viz., the vanadium alloys, the nickel or the manganese stabilized austenitic steels, and the ferritic steels, are analysed in terms of their induced activation in the TPSS fusion power reactor. The TPSS reactor has 1950 MW fusion power and inboard and outboard average neutron wall loading of 3.75 and 5.35 MW/m 2 respectively. The results shows that, after one year of continuous operation, the vanadium alloys have the least radioactivity at reactor shutdown. The maximum difference between the induced radioactivity in the vanadium alloys and in the other iron-based alloys occurs at about 10 years after reactor shutdown. At this time, the total reactor radioactivity, using the vanadium alloys, is about two orders of magnitude less than the total reactor radioactivity utilizing any other alloy. The difference is even larger in the first wall, the FW-vanadium activation is 3 orders of magnitude less than other alloys' FW activation. 2 refs., 7 figs

  6. Statistical analyses of extreme food habits

    International Nuclear Information System (INIS)

    Breuninger, M.; Neuhaeuser-Berthold, M.

    2000-01-01

    This report is a summary of the results of the project ''Statistical analyses of extreme food habits'', which was ordered from the National Office for Radiation Protection as a contribution to the amendment of the ''General Administrative Regulation to paragraph 45 of the Decree on Radiation Protection: determination of the radiation exposition by emission of radioactive substances from facilities of nuclear technology''. Its aim is to show if the calculation of the radiation ingested by 95% of the population by food intake, like it is planned in a provisional draft, overestimates the true exposure. If such an overestimation exists, the dimension of it should be determined. It was possible to prove the existence of this overestimation but its dimension could only roughly be estimated. To identify the real extent of it, it is necessary to include the specific activities of the nuclides, which were not available for this investigation. In addition to this the report shows how the amounts of food consumption of different groups of foods influence each other and which connections between these amounts should be taken into account, in order to estimate the radiation exposition as precise as possible. (orig.) [de

  7. Evaluation of the Olympus AU-510 analyser.

    Science.gov (United States)

    Farré, C; Velasco, J; Ramón, F

    1991-01-01

    The selective multitest Olympus AU-510 analyser was evaluated according to the recommendations of the Comision de Instrumentacion de la Sociedad Española de Quimica Clinica and the European Committee for Clinical Laboratory Standards. The evaluation was carried out in two stages: an examination of the analytical units and then an evaluation in routine work conditions. The operational characteristics of the system were also studied.THE FIRST STAGE INCLUDED A PHOTOMETRIC STUDY: dependent on the absorbance, the inaccuracy varies between +0.5% to -0.6% at 405 nm and from -5.6% to 10.6% at 340 nm; the imprecision ranges between -0.22% and 0.56% at 405 nm and between 0.09% and 2.74% at 340 nm. Linearity was acceptable, apart from a very low absorbance for NADH at 340 nm; and the imprecision of the serum sample pipetter was satisfactory.TWELVE SERUM ANALYTES WERE STUDIED UNDER ROUTINE CONDITIONS: glucose, urea urate, cholesterol, triglycerides, total bilirubin, creatinine, phosphate, iron, aspartate aminotransferase, alanine aminotransferase and gamma-glutamyl transferase.The within-run imprecision (CV%) ranged from 0.67% for phosphate to 2.89% for iron and the between-run imprecision from 0.97% for total bilirubin to 7.06% for iron. There was no carryover in a study of the serum sample pipetter. Carry-over studies with the reagent and sample pipetters shows some cross contamination in the iron assay.

  8. PRECLOSURE CONSEQUENCE ANALYSES FOR LICENSE APPLICATION

    International Nuclear Information System (INIS)

    S. Tsai

    2005-01-01

    Radiological consequence analyses are performed for potential releases from normal operations in surface and subsurface facilities and from Category 1 and Category 2 event sequences during the preclosure period. Surface releases from normal repository operations are primarily from radionuclides released from opening a transportation cask during dry transfer operations of spent nuclear fuel (SNF) in Dry Transfer Facility 1 (DTF 1), Dry Transfer Facility 2 (DTF 2), the Canister Handling facility (CHF), or the Fuel Handling Facility (FHF). Subsurface releases from normal repository operations are from resuspension of waste package surface contamination and neutron activation of ventilated air and silica dust from host rock in the emplacement drifts. The purpose of this calculation is to demonstrate that the preclosure performance objectives, specified in 10 CFR 63.111(a) and 10 CFR 63.111(b), have been met for the proposed design and operations in the geologic repository operations area. Preclosure performance objectives are discussed in Section 6.2.3 and are summarized in Tables 1 and 2

  9. Genomic analyses of the CAM plant pineapple.

    Science.gov (United States)

    Zhang, Jisen; Liu, Juan; Ming, Ray

    2014-07-01

    The innovation of crassulacean acid metabolism (CAM) photosynthesis in arid and/or low CO2 conditions is a remarkable case of adaptation in flowering plants. As the most important crop that utilizes CAM photosynthesis, the genetic and genomic resources of pineapple have been developed over many years. Genetic diversity studies using various types of DNA markers led to the reclassification of the two genera Ananas and Pseudananas and nine species into one genus Ananas and two species, A. comosus and A. macrodontes with five botanical varieties in A. comosus. Five genetic maps have been constructed using F1 or F2 populations, and high-density genetic maps generated by genotype sequencing are essential resources for sequencing and assembling the pineapple genome and for marker-assisted selection. There are abundant expression sequence tag resources but limited genomic sequences in pineapple. Genes involved in the CAM pathway has been analysed in several CAM plants but only a few of them are from pineapple. A reference genome of pineapple is being generated and will accelerate genetic and genomic research in this major CAM crop. This reference genome of pineapple provides the foundation for studying the origin and regulatory mechanism of CAM photosynthesis, and the opportunity to evaluate the classification of Ananas species and botanical cultivars. © The Author 2014. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  10. Social Media Analyses for Social Measurement

    Science.gov (United States)

    Schober, Michael F.; Pasek, Josh; Guggenheim, Lauren; Lampe, Cliff; Conrad, Frederick G.

    2016-01-01

    Demonstrations that analyses of social media content can align with measurement from sample surveys have raised the question of whether survey research can be supplemented or even replaced with less costly and burdensome data mining of already-existing or “found” social media content. But just how trustworthy such measurement can be—say, to replace official statistics—is unknown. Survey researchers and data scientists approach key questions from starting assumptions and analytic traditions that differ on, for example, the need for representative samples drawn from frames that fully cover the population. New conversations between these scholarly communities are needed to understand the potential points of alignment and non-alignment. Across these approaches, there are major differences in (a) how participants (survey respondents and social media posters) understand the activity they are engaged in; (b) the nature of the data produced by survey responses and social media posts, and the inferences that are legitimate given the data; and (c) practical and ethical considerations surrounding the use of the data. Estimates are likely to align to differing degrees depending on the research topic and the populations under consideration, the particular features of the surveys and social media sites involved, and the analytic techniques for extracting opinions and experiences from social media. Traditional population coverage may not be required for social media content to effectively predict social phenomena to the extent that social media content distills or summarizes broader conversations that are also measured by surveys. PMID:27257310

  11. Reliability Analyses of Groundwater Pollutant Transport

    Energy Technology Data Exchange (ETDEWEB)

    Dimakis, Panagiotis

    1997-12-31

    This thesis develops a probabilistic finite element model for the analysis of groundwater pollution problems. Two computer codes were developed, (1) one using finite element technique to solve the two-dimensional steady state equations of groundwater flow and pollution transport, and (2) a first order reliability method code that can do a probabilistic analysis of any given analytical or numerical equation. The two codes were connected into one model, PAGAP (Probability Analysis of Groundwater And Pollution). PAGAP can be used to obtain (1) the probability that the concentration at a given point at a given time will exceed a specified value, (2) the probability that the maximum concentration at a given point will exceed a specified value and (3) the probability that the residence time at a given point will exceed a specified period. PAGAP could be used as a tool for assessment purposes and risk analyses, for instance the assessment of the efficiency of a proposed remediation technique or to study the effects of parameter distribution for a given problem (sensitivity study). The model has been applied to study the greatest self sustained, precipitation controlled aquifer in North Europe, which underlies Oslo`s new major airport. 92 refs., 187 figs., 26 tabs.

  12. System for analysing sickness absenteeism in Poland.

    Science.gov (United States)

    Indulski, J A; Szubert, Z

    1997-01-01

    The National System of Sickness Absenteeism Statistics has been functioning in Poland since 1977, as the part of the national health statistics. The system is based on a 15-percent random sample of copies of certificates of temporary incapacity for work issued by all health care units and authorised private medical practitioners. A certificate of temporary incapacity for work is received by every insured employee who is compelled to stop working due to sickness, accident, or due to the necessity to care for a sick member of his/her family. The certificate is required on the first day of sickness. Analyses of disease- and accident-related sickness absenteeism carried out each year in Poland within the statistical system lead to the main conclusions: 1. Diseases of the musculoskeletal and peripheral nervous systems accounting, when combined, for 1/3 of the total sickness absenteeism, are a major health problem of the working population in Poland. During the past five years, incapacity for work caused by these diseases in males increased 2.5 times. 2. Circulatory diseases, and arterial hypertension and ischaemic heart disease in particular (41% and 27% of sickness days, respectively), create an essential health problem among males at productive age, especially, in the 40 and older age group. Absenteeism due to these diseases has increased in males more than two times.

  13. Comparative analyses of bidirectional promoters in vertebrates

    Directory of Open Access Journals (Sweden)

    Taylor James

    2008-05-01

    Full Text Available Abstract Background Orthologous genes with deep phylogenetic histories are likely to retain similar regulatory features. In this report we utilize orthology assignments for pairs of genes co-regulated by bidirectional promoters to map the ancestral history of the promoter regions. Results Our mapping of bidirectional promoters from humans to fish shows that many such promoters emerged after the divergence of chickens and fish. Furthermore, annotations of promoters in deep phylogenies enable detection of missing data or assembly problems present in higher vertebrates. The functional importance of bidirectional promoters is indicated by selective pressure to maintain the arrangement of genes regulated by the promoter over long evolutionary time spans. Characteristics unique to bidirectional promoters are further elucidated using a technique for unsupervised classification, known as ESPERR. Conclusion Results of these analyses will aid in our understanding of the evolution of bidirectional promoters, including whether the regulation of two genes evolved as a consequence of their proximity or if function dictated their co-regulation.

  14. Thermomagnetic Analyses to Test Concrete Stability

    Science.gov (United States)

    Geiss, C. E.; Gourley, J. R.

    2017-12-01

    Over the past decades pyrrhotite-containing aggregate has been used in concrete to build basements and foundations in central Connecticut. The sulphur in the pyrrhotite reacts to several secondary minerals, and associated changes in volume lead to a loss of structural integrity. As a result hundreds of homes have been rendered worthless as remediation costs often exceed the value of the homes and the value of many other homes constructed during the same time period is in question as concrete provenance and potential future structural issues are unknown. While minor abundances of pyrrhotite are difficult to detect or quantify by traditional means, the mineral is easily identified through its magnetic properties. All concrete samples from affected homes show a clear increase in magnetic susceptibility above 220°C due to the γ - transition of Fe9S10 [1] and a clearly defined Curie-temperature near 320°C for Fe7S8. X-ray analyses confirm the presence of pyrrhotite and ettringite in these samples. Synthetic mixtures of commercially available concrete and pyrrhotite show that the method is semiquantitative but needs to be calibrated for specific pyrrhotite mineralogies. 1. Schwarz, E.J., Magnetic properties of pyrrhotite and their use in applied geology and geophysics. 1975, Geological Survey of Canada : Ottawa, ON, Canada: Canada.

  15. Social Media Analyses for Social Measurement.

    Science.gov (United States)

    Schober, Michael F; Pasek, Josh; Guggenheim, Lauren; Lampe, Cliff; Conrad, Frederick G

    2016-01-01

    Demonstrations that analyses of social media content can align with measurement from sample surveys have raised the question of whether survey research can be supplemented or even replaced with less costly and burdensome data mining of already-existing or "found" social media content. But just how trustworthy such measurement can be-say, to replace official statistics-is unknown. Survey researchers and data scientists approach key questions from starting assumptions and analytic traditions that differ on, for example, the need for representative samples drawn from frames that fully cover the population. New conversations between these scholarly communities are needed to understand the potential points of alignment and non-alignment. Across these approaches, there are major differences in (a) how participants (survey respondents and social media posters) understand the activity they are engaged in; (b) the nature of the data produced by survey responses and social media posts, and the inferences that are legitimate given the data; and (c) practical and ethical considerations surrounding the use of the data. Estimates are likely to align to differing degrees depending on the research topic and the populations under consideration, the particular features of the surveys and social media sites involved, and the analytic techniques for extracting opinions and experiences from social media. Traditional population coverage may not be required for social media content to effectively predict social phenomena to the extent that social media content distills or summarizes broader conversations that are also measured by surveys.

  16. Validating experimental and theoretical Langmuir probe analyses

    Science.gov (United States)

    Pilling, L. S.; Carnegie, D. A.

    2007-08-01

    Analysis of Langmuir probe characteristics contains a paradox in that it is unknown a priori which theory is applicable before it is applied. Often theories are assumed to be correct when certain criteria are met although they may not validate the approach used. We have analysed the Langmuir probe data from cylindrical double and single probes acquired from a dc discharge plasma over a wide variety of conditions. This discharge contains a dual-temperature distribution and hence fitting a theoretically generated curve is impractical. To determine the densities, an examination of the current theories was necessary. For the conditions where the probe radius is the same order of magnitude as the Debye length, the gradient expected for orbital-motion limited (OML) is approximately the same as the radial-motion gradients. An analysis of the 'gradients' from the radial-motion theory was able to resolve the differences from the OML gradient value of two. The method was also able to determine whether radial or OML theories applied without knowledge of the electron temperature, or separation of the ion and electron contributions. Only the value of the space potential is necessary to determine the applicable theory.

  17. Bench top and portable mineral analysers, borehole core analysers and in situ borehole logging

    International Nuclear Information System (INIS)

    Howarth, W.J.; Watt, J.S.

    1982-01-01

    Bench top and portable mineral analysers are usually based on balanced filter techniques using scintillation detectors or on low resolution proportional detectors. The application of radioisotope x-ray techniques to in situ borehole logging is increasing, and is particularly suited for logging for tin and higher atomic number elements

  18. Integrated Field Analyses of Thermal Springs

    Science.gov (United States)

    Shervais, K.; Young, B.; Ponce-Zepeda, M. M.; Rosove, S.

    2011-12-01

    A group of undergraduate researchers through the SURE internship offered by the Southern California Earthquake Center (SCEC) have examined thermal springs in southern Idaho, northern Utah as well as mud volcanoes in the Salton Sea, California. We used an integrated approach to estimate the setting and maximum temperature, including water chemistry, Ipad-based image and data-base management, microbiology, and gas analyses with a modified Giggenbach sampler.All springs were characterized using GISRoam (tmCogent3D). We are performing geothermometry calculations as well as comparisons with temperature gradient data on the results while also analyzing biological samples. Analyses include water temperature, pH, electrical conductivity, and TDS measured in the field. Each sample is sealed and chilled and delivered to a water lab within 12 hours.Temperatures are continuously monitored with the use of Solinst Levelogger Juniors. Through partnership with a local community college geology club, we receive results on a monthly basis and are able to process initial data earlier in order to evaluate data over a longer time span. The springs and mudpots contained microbial organisms which were analyzed using methods of single colony isolation, polymerase chain reaction, and DNA sequencing showing the impact of the organisms on the springs or vice versa. Soon we we will collect gas samples at sites that show signs of gas. This will be taken using a hybrid of the Giggenbach method and our own methods. Drawing gas samples has proven a challenge, however we devised a method to draw out gas samples utilizing the Giggenbach flask, transferring samples to glass blood sample tubes, replacing NaOH in the Giggenbach flask, and evacuating it in the field for multiple samples using a vacuum pump. We also use a floating platform devised to carry and lower a levelogger, to using an in-line fuel filter from a tractor in order to keep mud from contaminating the equipment.The use of raster

  19. Transient Seepage for Levee Engineering Analyses

    Science.gov (United States)

    Tracy, F. T.

    2017-12-01

    Historically, steady-state seepage analyses have been a key tool for designing levees by practicing engineers. However, with the advances in computer modeling, transient seepage analysis has become a potentially viable tool. A complication is that the levees usually have partially saturated flow, and this is significantly more complicated in transient flow. This poster illustrates four elements of our research in partially saturated flow relating to the use of transient seepage for levee design: (1) a comparison of results from SEEP2D, SEEP/W, and SLIDE for a generic levee cross section common to the southeastern United States; (2) the results of a sensitivity study of varying saturated hydraulic conductivity, the volumetric water content function (as represented by van Genuchten), and volumetric compressibility; (3) a comparison of when soils do and do not exhibit hysteresis, and (4) a description of proper and improper use of transient seepage in levee design. The variables considered for the sensitivity and hysteresis studies are pore pressure beneath the confining layer at the toe, the flow rate through the levee system, and a levee saturation coefficient varying between 0 and 1. Getting results for SEEP2D, SEEP/W, and SLIDE to match proved more difficult than expected. After some effort, the results matched reasonably well. Differences in results were caused by various factors, including bugs, different finite element meshes, different numerical formulations of the system of nonlinear equations to be solved, and differences in convergence criteria. Varying volumetric compressibility affected the above test variables the most. The levee saturation coefficient was most affected by the use of hysteresis. The improper use of pore pressures from a transient finite element seepage solution imported into a slope stability computation was found to be the most grievous mistake in using transient seepage in the design of levees.

  20. Summary of the analyses for recovery factors

    Science.gov (United States)

    Verma, Mahendra K.

    2017-07-17

    IntroductionIn order to determine the hydrocarbon potential of oil reservoirs within the U.S. sedimentary basins for which the carbon dioxide enhanced oil recovery (CO2-EOR) process has been considered suitable, the CO2 Prophet model was chosen by the U.S. Geological Survey (USGS) to be the primary source for estimating recovery-factor values for individual reservoirs. The choice was made because of the model’s reliability and the ease with which it can be used to assess a large number of reservoirs. The other two approaches—the empirical decline curve analysis (DCA) method and a review of published literature on CO2-EOR projects—were deployed to verify the results of the CO2 Prophet model. This chapter discusses the results from CO2 Prophet (chapter B, by Emil D. Attanasi, this report) and compares them with results from decline curve analysis (chapter C, by Hossein Jahediesfanjani) and those reported in the literature for selected reservoirs with adequate data for analyses (chapter D, by Ricardo A. Olea).To estimate the technically recoverable hydrocarbon potential for oil reservoirs where CO2-EOR has been applied, two of the three approaches—CO2 Prophet modeling and DCA—do not include analysis of economic factors, while the third approach—review of published literature—implicitly includes economics. For selected reservoirs, DCA has provided estimates of the technically recoverable hydrocarbon volumes, which, in combination with calculated amounts of original oil in place (OOIP), helped establish incremental CO2-EOR recovery factors for individual reservoirs.The review of published technical papers and reports has provided substantial information on recovery factors for 70 CO2-EOR projects that are either commercially profitable or classified as pilot tests. When comparing the results, it is important to bear in mind the differences and limitations of these three approaches.

  1. The ABC (Analysing Biomolecular Contacts-database

    Directory of Open Access Journals (Sweden)

    Walter Peter

    2007-03-01

    Full Text Available As protein-protein interactions are one of the basic mechanisms in most cellular processes, it is desirable to understand the molecular details of protein-protein contacts and ultimately be able to predict which proteins interact. Interface areas on a protein surface that are involved in protein interactions exhibit certain characteristics. Therefore, several attempts were made to distinguish protein interactions from each other and to categorize them. One way of classification are the groups of transient and permanent interactions. Previously two of the authors analysed several properties for transient complexes such as the amino acid and secondary structure element composition and pairing preferences. Certainly, interfaces can be characterized by many more possible attributes and this is a subject of intense ongoing research. Although several freely available online databases exist that illuminate various aspects of protein-protein interactions, we decided to construct a new database collecting all desired interface features allowing for facile selection of subsets of complexes. As database-server we applied MySQL and the program logic was written in JAVA. Furthermore several class extensions and tools such as JMOL were included to visualize the interfaces and JfreeChart for the representation of diagrams and statistics. The contact data is automatically generated from standard PDB files by a tcl/tk-script running through the molecular visualization package VMD. Currently the database contains 536 interfaces extracted from 479 PDB files and it can be queried by various types of parameters. Here, we describe the database design and demonstrate its usefulness with a number of selected features.

  2. Trend analyses with river sediment rating curves

    Science.gov (United States)

    Warrick, Jonathan A.

    2015-01-01

    Sediment rating curves, which are fitted relationships between river discharge (Q) and suspended-sediment concentration (C), are commonly used to assess patterns and trends in river water quality. In many of these studies it is assumed that rating curves have a power-law form (i.e., C = aQb, where a and b are fitted parameters). Two fundamental questions about the utility of these techniques are assessed in this paper: (i) How well to the parameters, a and b, characterize trends in the data? (ii) Are trends in rating curves diagnostic of changes to river water or sediment discharge? As noted in previous research, the offset parameter, a, is not an independent variable for most rivers, but rather strongly dependent on b and Q. Here it is shown that a is a poor metric for trends in the vertical offset of a rating curve, and a new parameter, â, as determined by the discharge-normalized power function [C = â (Q/QGM)b], where QGM is the geometric mean of the Q values sampled, provides a better characterization of trends. However, these techniques must be applied carefully, because curvature in the relationship between log(Q) and log(C), which exists for many rivers, can produce false trends in â and b. Also, it is shown that trends in â and b are not uniquely diagnostic of river water or sediment supply conditions. For example, an increase in â can be caused by an increase in sediment supply, a decrease in water supply, or a combination of these conditions. Large changes in water and sediment supplies can occur without any change in the parameters, â and b. Thus, trend analyses using sediment rating curves must include additional assessments of the time-dependent rates and trends of river water, sediment concentrations, and sediment discharge.

  3. BN-600 hybrid core benchmark analyses

    International Nuclear Information System (INIS)

    Kim, Y.I.; Stanculescu, A.; Finck, P.; Hill, R.N.; Grimm, K.N.

    2003-01-01

    Benchmark analyses for the hybrid BN-600 reactor that contains three uranium enrichment zones and one plutonium zone in the core, have been performed within the frame of an IAEA sponsored Coordinated Research Project. The results for several relevant reactivity parameters obtained by the participants with their own state-of-the-art basic data and codes, were compared in terms of calculational uncertainty, and their effects on the ULOF transient behavior of the hybrid BN-600 core were evaluated. The comparison of the diffusion and transport results obtained for the homogeneous representation generally shows good agreement for most parameters between the RZ and HEX-Z models. The burnup effect and the heterogeneity effect on most reactivity parameters also show good agreement for the HEX-Z diffusion and transport theory results. A large difference noticed for the sodium and steel density coefficients is mainly due to differences in the spatial coefficient predictions for non fuelled regions. The burnup reactivity loss was evaluated to be 0.025 (4.3 $) within ∼ 5.0% standard deviation. The heterogeneity effect on most reactivity coefficients was estimated to be small. The heterogeneity treatment reduced the control rod worth by 2.3%. The heterogeneity effect on the k-eff and control rod worth appeared to differ strongly depending on the heterogeneity treatment method. A substantial spread noticed for several reactivity coefficients did not give a significant impact on the transient behavior prediction. This result is attributable to compensating effects between several reactivity effects and the specific design of the partially MOX fuelled hybrid core. (author)

  4. Vibro-spring particle size distribution analyser

    International Nuclear Information System (INIS)

    Patel, Ketan Shantilal

    2002-01-01

    This thesis describes the design and development of an automated pre-production particle size distribution analyser for particles in the 20 - 2000 μm size range. This work is follow up to the vibro-spring particle sizer reported by Shaeri. In its most basic form, the instrument comprises a horizontally held closed coil helical spring that is partly filled with the test powder and sinusoidally vibrated in the transverse direction. Particle size distribution data are obtained by stretching the spring to known lengths and measuring the mass of the powder discharged from the spring's coils. The size of the particles on the other hand is determined from the spring 'intercoil' distance. The instrument developed by Shaeri had limited use due to its inability to measure sample mass directly. For the device reported here, modifications are made to the original configurations to establish means of direct sample mass measurement. The feasibility of techniques for measuring the mass of powder retained within the spring are investigated in detail. Initially, the measurement of mass is executed in-situ from the vibration characteristics based on the spring's first harmonic resonant frequency. This method is often erratic and unreliable due to the particle-particle-spring wall interactions and the spring bending. An much more successful alternative is found from a more complicated arrangement in which the spring forms part of a stiff cantilever system pivoted along its main axis. Here, the sample mass is determined in the 'static mode' by monitoring the cantilever beam's deflection following the wanton termination of vibration. The system performance has been optimised through the variations of the mechanical design of the key components and the operating procedure as well as taking into account the effect of changes in the ambient temperature on the system's response. The thesis also describes the design and development of the ancillary mechanisms. These include the pneumatic

  5. Kuosheng Mark III containment analyses using GOTHIC

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Ansheng, E-mail: samuellin1999@iner.gov.tw; Chen, Yen-Shu; Yuann, Yng-Ruey

    2013-10-15

    Highlights: • The Kuosheng Mark III containment model is established using GOTHIC. • Containment pressure and temperature responses due to LOCA are presented. • The calculated results are all below the design values and compared with the FSAR results. • The calculated results can be served as an analysis reference for an SPU project in the future. -- Abstract: Kuosheng nuclear power plant in Taiwan is a twin-unit BWR/6 plant, and both units utilize the Mark III containment. Currently, the plant is performing a stretch power uprate (SPU) project to increase the core thermal power to 103.7% OLTP (original licensed thermal power). However, the containment response in the Kuosheng Final Safety Analysis Report (FSAR) was completed more than twenty-five years ago. The purpose of this study is to establish a Kuosheng Mark III containment model using the containment program GOTHIC. The containment pressure and temperature responses under the design-basis accidents, which are the main steam line break (MSLB) and the recirculation line break (RCLB) accidents, are investigated. Short-term and long-term analyses are presented in this study. The short-term analysis is to calculate the drywell peak pressure and temperature which happen in the early stage of the LOCAs. The long-term analysis is to calculate the peak pressure and temperature of the reactor building space. In the short-term analysis, the calculated peak drywell to wetwell differential pressure is 140.6 kPa for the MSLB, which is below than the design value of 189.6 kPa. The calculated peak drywell temperature is 158 °C, which is still below the design value of 165.6 °C. In addition, in the long-term analysis, the calculated peak containment pressure is 47 kPa G, which is below the design value of 103.4 kPa G. The calculated peak values of containment temperatures are 74.7 °C, which is lower than the design value of 93.3 °C. Therefore, the Kuosheng Mark III containment can maintain the integrity after

  6. YALINA Booster subcritical assembly modeling and analyses

    International Nuclear Information System (INIS)

    Talamo, A.; Gohar, Y.; Aliberti, G.; Cao, Y.; Zhong, Z.; Kiyavitskaya, H.; Bournos, V.; Fokov, Y.; Routkovskaya, C.; Sadovich, S.

    2010-01-01

    Full text: Accurate simulation models of the YALINA Booster assembly of the Joint Institute for Power and Nuclear Research (JIPNR)-Sosny, Belarus have been developed by Argonne National Laboratory (ANL) of the USA. YALINA-Booster has coupled zones operating with fast and thermal neutron spectra, which requires a special attention in the modelling process. Three different uranium enrichments of 90%, 36% or 21% were used in the fast zone and 10% uranium enrichment was used in the thermal zone. Two of the most advanced Monte Carlo computer programs have been utilized for the ANL analyses: MCNP of the Los Alamos National Laboratory and MONK of the British Nuclear Fuel Limited and SERCO Assurance. The developed geometrical models for both computer programs modelled all the details of the YALINA Booster facility as described in the technical specifications defined in the International Atomic Energy Agency (IAEA) report without any geometrical approximation or material homogenization. Materials impurities and the measured material densities have been used in the models. The obtained results for the neutron multiplication factors calculated in criticality mode (keff) and in source mode (ksrc) with an external neutron source from the two Monte Carlo programs are very similar. Different external neutron sources have been investigated including californium, deuterium-deuterium (D-D), and deuterium-tritium (D-T) neutron sources. The spatial neutron flux profiles and the neutron spectra in the experimental channels were calculated. In addition, the kinetic parameters were defined including the effective delayed neutron fraction, the prompt neutron lifetime, and the neutron generation time. A new calculation methodology has been developed at ANL to simulate the pulsed neutron source experiments. In this methodology, the MCNP code is used to simulate the detector response from a single pulse of the external neutron source and a C code is used to superimpose the pulse until the

  7. Altools: a user friendly NGS data analyser.

    Science.gov (United States)

    Camiolo, Salvatore; Sablok, Gaurav; Porceddu, Andrea

    2016-02-17

    Genotyping by re-sequencing has become a standard approach to estimate single nucleotide polymorphism (SNP) diversity, haplotype structure and the biodiversity and has been defined as an efficient approach to address geographical population genomics of several model species. To access core SNPs and insertion/deletion polymorphisms (indels), and to infer the phyletic patterns of speciation, most such approaches map short reads to the reference genome. Variant calling is important to establish patterns of genome-wide association studies (GWAS) for quantitative trait loci (QTLs), and to determine the population and haplotype structure based on SNPs, thus allowing content-dependent trait and evolutionary analysis. Several tools have been developed to investigate such polymorphisms as well as more complex genomic rearrangements such as copy number variations, presence/absence variations and large deletions. The programs available for this purpose have different strengths (e.g. accuracy, sensitivity and specificity) and weaknesses (e.g. low computation speed, complex installation procedure and absence of a user-friendly interface). Here we introduce Altools, a software package that is easy to install and use, which allows the precise detection of polymorphisms and structural variations. Altools uses the BWA/SAMtools/VarScan pipeline to call SNPs and indels, and the dnaCopy algorithm to achieve genome segmentation according to local coverage differences in order to identify copy number variations. It also uses insert size information from the alignment of paired-end reads and detects potential large deletions. A double mapping approach (BWA/BLASTn) identifies precise breakpoints while ensuring rapid elaboration. Finally, Altools implements several processes that yield deeper insight into the genes affected by the detected polymorphisms. Altools was used to analyse both simulated and real next-generation sequencing (NGS) data and performed satisfactorily in terms of

  8. First Super-Earth Atmosphere Analysed

    Science.gov (United States)

    2010-12-01

    The atmosphere around a super-Earth exoplanet has been analysed for the first time by an international team of astronomers using ESO's Very Large Telescope. The planet, which is known as GJ 1214b, was studied as it passed in front of its parent star and some of the starlight passed through the planet's atmosphere. We now know that the atmosphere is either mostly water in the form of steam or is dominated by thick clouds or hazes. The results will appear in the 2 December 2010 issue of the journal Nature. The planet GJ 1214b was confirmed in 2009 using the HARPS instrument on ESO's 3.6-metre telescope in Chile (eso0950) [1]. Initial findings suggested that this planet had an atmosphere, which has now been confirmed and studied in detail by an international team of astronomers, led by Jacob Bean (Harvard-Smithsonian Center for Astrophysics), using the FORS instrument on ESO's Very Large Telescope. "This is the first super-Earth to have its atmosphere analysed. We've reached a real milestone on the road toward characterising these worlds," said Bean. GJ 1214b has a radius of about 2.6 times that of the Earth and is about 6.5 times as massive, putting it squarely into the class of exoplanets known as super-Earths. Its host star lies about 40 light-years from Earth in the constellation of Ophiuchus (the Serpent Bearer). It is a faint star [2], but it is also small, which means that the size of the planet is large compared to the stellar disc, making it relatively easy to study [3]. The planet travels across the disc of its parent star once every 38 hours as it orbits at a distance of only two million kilometres: about seventy times closer than the Earth orbits the Sun. To study the atmosphere, the team observed the light coming from the star as the planet passed in front of it [4]. During these transits, some of the starlight passes through the planet's atmosphere and, depending on the chemical composition and weather on the planet, specific wavelengths of light are

  9. Systems reliability analyses and risk analyses for the licencing procedure under atomic law

    International Nuclear Information System (INIS)

    Berning, A.; Spindler, H.

    1983-01-01

    For the licencing procedure under atomic law in accordance with Article 7 AtG, the nuclear power plant as a whole needs to be assessed, plus the reliability of systems and plant components that are essential to safety are to be determined with probabilistic methods. This requirement is the consequence of safety criteria for nuclear power plants issued by the Home Department (BMI). Systems reliability studies and risk analyses used in licencing procedures under atomic law are identified. The stress is on licencing decisions, mainly for PWR-type reactors. Reactor Safety Commission (RSK) guidelines, examples of reasoning in legal proceedings and arguments put forth by objectors are also dealt with. Correlations are shown between reliability analyses made by experts and licencing decisions by means of examples. (orig./HP) [de

  10. Validation of quantitative {sup 1}H NMR method for the analysis of pharmaceutical formulations; Validacao de metodo quantitativo por RMN de {sup 1}H para analises de formulacoes farmaceuticas

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Maiara da S. [Universidade de Sao Paulo (USP), Sao Carlos, SP (Brazil). Instituto de Quimica; Colnago, Luiz Alberto, E-mail: luiz.colnago@embrapa.br [Embrapa Instrumentacao, Sao Carlos, SP (Brazil)

    2013-09-01

    The need for effective and reliable quality control in products from pharmaceutical industries renders the analyses of their active ingredients and constituents of great importance. This study presents the theoretical basis of Superscript-One H NMR for quantitative analyses and an example of the method validation according to Resolution RE N. 899 by the Brazilian National Health Surveillance Agency (ANVISA), in which the compound paracetamol was the active ingredient. All evaluated parameters (selectivity, linearity, accuracy, repeatability and robustness) showed satisfactory results. It was concluded that a single NMR measurement provides structural and quantitative information of active components and excipients in the sample. (author)

  11. Treatment analysis of incentive politics for renewable energy projects in the clean development mechanism (CDM): the Brazilian case; Analise do tratamento das politicas de incentivos a projetos de energias renovaveis no mecanismo de desenvolvimento limpo (MDL): o caso brasileiro

    Energy Technology Data Exchange (ETDEWEB)

    Medeiros, Anamelia; Hauser, Philipp, Emails: anameliam@yahoo.com.br, philipphauser@web.de

    2010-07-01

    This paper analyses the politics for mitigation recently adopted by the Brazil, and discuss his treatment under the rules of CDM, viewing to contribute for a transparent solution which to allow the conciliation global and national politics for the clean expansion of the energy sector in Brazil.

  12. Statistical power analyses using G*Power 3.1: tests for correlation and regression analyses.

    Science.gov (United States)

    Faul, Franz; Erdfelder, Edgar; Buchner, Axel; Lang, Albert-Georg

    2009-11-01

    G*Power is a free power analysis program for a variety of statistical tests. We present extensions and improvements of the version introduced by Faul, Erdfelder, Lang, and Buchner (2007) in the domain of correlation and regression analyses. In the new version, we have added procedures to analyze the power of tests based on (1) single-sample tetrachoric correlations, (2) comparisons of dependent correlations, (3) bivariate linear regression, (4) multiple linear regression based on the random predictor model, (5) logistic regression, and (6) Poisson regression. We describe these new features and provide a brief introduction to their scope and handling.

  13. Forced vibration tests and simulation analyses of a nuclear reactor building. Part 2: simulation analyses

    International Nuclear Information System (INIS)

    Kuno, M.; Nakagawa, S.; Momma, T.; Naito, Y.; Niwa, M.; Motohashi, S.

    1995-01-01

    Forced vibration tests of a BWR-type reactor building. Hamaoka Unit 4, were performed. Valuable data on the dynamic characteristics of the soil-structure interaction system were obtained through the tests. Simulation analyses of the fundamental dynamic characteristics of the soil-structure system were conducted, using a basic lumped mass soil-structure model (lattice model), and strong correlation with the measured data was obtained. Furthermore, detailed simulation models were employed to investigate the effects of simultaneously induced vertical response and response of the adjacent turbine building on the lateral response of the reactor building. (author). 4 refs., 11 figs

  14. Integrated Waste Treatment Unit (IWTU) Input Coal Analyses and Off-Gass Filter (OGF) Content Analyses

    Energy Technology Data Exchange (ETDEWEB)

    Jantzen, Carol M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Missimer, David M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL); Guenther, Chris P. [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Shekhawat, Dushyant [National Energy Technology Lab. (NETL), Morgantown, WV (United States); VanEssendelft, Dirk T. [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Means, Nicholas C. [AECOM Technology Corp., Oak Ridge, TN (United States)

    2015-04-23

    in process piping and materials, in excessive off-gas absorbent loading, and in undesired process emissions. The ash content of the coal is important as the ash adds to the DMR and other vessel products which affect the final waste product mass and composition. The amount and composition of the ash also affects the reaction kinetics. Thus ash content and composition contributes to the mass balance. In addition, sodium, potassium, calcium, sulfur, and maybe silica and alumina in the ash may contribute to wall-scale formation. Sodium, potassium, and alumina in the ash will be overwhelmed by the sodium, potassium, and alumina from the feed but the impact from the other ash components needs to be quantified. A maximum coal particle size is specified so the feed system does not plug and a minimum particle size is specified to prevent excess elutriation from the DMR to the Process Gas Filter (PGF). A vendor specification was used to procure the calcined coal for IWTU processing. While the vendor supplied a composite analysis for the 22 tons of coal (Appendix A), this study compares independent analyses of the coal performed at the Savannah River National Laboratory (SRNL) and at the National Energy Technology Laboratory (NETL). Three supersacks a were sampled at three different heights within the sack in order to determine within bag variability and between bag variability of the coal. These analyses were also compared to the vendor’s composite analyses and to the coal specification. These analyses were also compared to historic data on Bestac coal analyses that had been performed at Hazen Research Inc. (HRI) between 2004-2011.

  15. Thermoeconomic and thermodynamics analysis of a sugarcane plant that produces energy surplus for commercialization; Analise termodinamica e termoeconomica de uma usina sucroalcooleira que produz excedente de energia para comercializacao

    Energy Technology Data Exchange (ETDEWEB)

    Fiomari, Marcelo Caldato; Mashiba, Marcos Hideo da Silva; Lima, Rodrigo dos Santos; Maia, Cassio Roberto Macedo; Ramos, Ricardo Alan Verdu [Universidade Estadual Paulista (NUPLEN/UNESP), Ilha Solteira, SP (Brazil). Dept. de Engenharia Mecanica. Nucleo de Planejamento Energetico, Geracao e Cogeracao de Energia], e-mail: nuplen@dem.feis.unesp.br

    2006-07-01

    In this work, thermodynamic and thermo economic analyses of a plant resulted from an expansion of the Pioneiros Distillery's cogeneration system are carried out, which is constituted basically by a boiler that produces 140 ton/h of steam at high pressure and temperature (6,6 MPa and 530 deg C, respectively), by a condensation-extraction turbine that drives a electrical generator producing 32 MW, being the mechanical drivers realized by electrical engines. By means of thermodynamic analyses it's possible to define some plant's performance indexes as well as evaluate the global use of energy in each component. The thermo economic analysis allows evaluating the costs of capital and fuel reflexes in the composition of the products (steam and electricity) costs. (author)

  16. Integrating and scheduling an open set of static analyses

    DEFF Research Database (Denmark)

    Eichberg, Michael; Mezini, Mira; Kloppenburg, Sven

    2006-01-01

    to keep the set of analyses open. We propose an approach to integrating and scheduling an open set of static analyses which decouples the individual analyses and coordinates the analysis executions such that the overall time and space consumption is minimized. The approach has been implemented...... for the Eclipse IDE and has been used to integrate a wide range of analyses such as finding bug patterns, detecting violations of design guidelines, or type system extensions for Java....

  17. An analysis of the Brazilian political and regulatory scenario of the small hydroelectric power plants in the 2009/2008 biennium; Uma analise do cenario politico e regulatorio brasileiro das PCHS no bienio 2009/2008

    Energy Technology Data Exchange (ETDEWEB)

    Tiago Filho, Geraldo Lucio; Galhardo, Camila Rocha; Barbosa, Adriana de Cassia [Centro Nacional de Referencia em Pequenas Centrais Hidreletricas (CERPCH/UNIFEI), Itajuba, MG (Brazil)], E-mails: pchnoticias@unifei.edu.br, pchcomunicacao@unifei.edu.br

    2010-01-15

    This work presents the most recent law changes that took place in 2009/2008 and analyses its consequences to the SHP market. It also makes reference on the growth of the installed capacity of SHP in Brazil and discuss some law, environment and social aspects of the implementation of those type of power plant in order to show an overview of the Brazilian energy matrix. (author)

  18. Application of self-adaptive procedure to the thermal problems analysis under steady-state and transient regimens; Aplicacao de procedimento auto-adaptativo na analise de problemas termicos no regime permanente e transiente

    Energy Technology Data Exchange (ETDEWEB)

    Lyra, Paulo Roberto Maciel [Pernambuco Univ., Recife, PE (Brazil). Dept. de Engenharia Civil

    1991-12-31

    This work describes a procedure for the adaptive time dependent Finite Element Method using an automatic mesh refinement (H-Version) that efficiently reduces estimated errors ( a posteriori) below pre-assigned limits. Classical model problem for steady-state heat transfer are investigated, and the results are compared with the analytical solution. Then some typical time-dependent problem are qualitatively analysed. (author) 10 refs., 7 figs.

  19. Angular analyses in relativistic quantum mechanics; Analyses angulaires en mecanique quantique relativiste

    Energy Technology Data Exchange (ETDEWEB)

    Moussa, P [Commissariat a l' Energie Atomique, 91 - Saclay (France). Centre d' Etudes Nucleaires

    1968-06-01

    This work describes the angular analysis of reactions between particles with spin in a fully relativistic fashion. One particle states are introduced, following Wigner's method, as representations of the inhomogeneous Lorentz group. In order to perform the angular analyses, the reduction of the product of two representations of the inhomogeneous Lorentz group is studied. Clebsch-Gordan coefficients are computed for the following couplings: l-s coupling, helicity coupling, multipolar coupling, and symmetric coupling for more than two particles. Massless and massive particles are handled simultaneously. On the way we construct spinorial amplitudes and free fields; we recall how to establish convergence theorems for angular expansions from analyticity hypothesis. Finally we substitute these hypotheses to the idea of 'potential radius', which gives at low energy the usual 'centrifugal barrier' factors. The presence of such factors had never been deduced from hypotheses compatible with relativistic invariance. (author) [French] On decrit un formalisme permettant de tenir compte de l'invariance relativiste, dans l'analyse angulaire des amplitudes de reaction entre particules de spin quelconque. Suivant Wigner, les etats a une particule sont introduits a l'aide des representations du groupe de Lorentz inhomogene. Pour effectuer les analyses angulaires, on etudie la reduction du produit de deux representations du groupe de Lorentz inhomogene. Les coefficients de Clebsch-Gordan correspondants sont calcules dans les couplages suivants: couplage l-s couplage d'helicite, couplage multipolaire, couplage symetrique pour plus de deux particules. Les particules de masse nulle et de masse non nulle sont traitees simultanement. Au passage, on introduit les amplitudes spinorielles et on construit les champs libres, on rappelle comment des hypotheses d'analyticite permettent d'etablir des theoremes de convergence pour les developpements angulaires. Enfin on fournit un substitut a la

  20. A study on chemical element determinations in human nails by neutron activation analysis; Estudo sobre determinacao de elementos quimicos em unhas humanas pelo metodo de analise por ativacao com neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Sanches, Thalita Pinheiro

    2012-07-01

    Nail analyses have been the object of study in order to assess the levels of elements accumulated in the human organism and to use this tissue to monitor environmental and occupational exposure, to evaluate the nutritional status, to verify intoxication by toxic metals and to diagnose or to prevent diseases. Nail analyses present advantages due to easy sample collection, storage, transportation and this tissue provides element level accumulation over time. However, there is controversy regarding the application of nail analysis data due to difficulties to establish reliable reference values or element concentration ranges as control values. The objective of this study was to evaluate the factors that can affect nail element concentrations for further sample analyses of a group of individuals by applying neutron activation analysis (NAA). Fingernails and toenails collected from adult individuals of both genders, aged 18 to 71 years, living in the Sao Paulo Metropolitan Region were cut in small fragments, cleaned and dried for analyses. Samples and element standards were irradiated for 16 h under a thermal neutron flux of about 4.5 x 10{sup 12} n cm{sup -2} s{sup -1} at the IEA-R1 nuclear research reactor followed by gamma ray spectrometry. Element concentrations for As, Br, Ca, Co, Cr, Cs, Fe, K, La, Na, Rb, Sb, Sc, Se and Zn were determined. For quality control of the analytical results, certified reference materials were analysed and the results showed good accuracy and precision with relative errors and relative standard deviations lower than 5.1 % and 11.6 %, respectively. Preliminary assays indicated that the contribution due to impurities from plastic involucres used in the irradiation as well as those from nail polishes is very low and could be considered negligible. Results from the nail sample cleaning process using distinct procedures indicated that HNO{sub 3} solution may cause sample dissolution. Sample homogeneity was verified by analysis of a sample in

  1. Comparative biochemical analyses of venous blood and peritoneal fluid from horses with colic using a portable analyser and an in-house analyser.

    Science.gov (United States)

    Saulez, M N; Cebra, C K; Dailey, M

    2005-08-20

    Fifty-six horses with colic were examined over a period of three months. The concentrations of glucose, lactate, sodium, potassium and chloride, and the pH of samples of blood and peritoneal fluid, were determined with a portable clinical analyser and with an in-house analyser and the results were compared. Compared with the in-house analyser, the portable analyser gave higher pH values for blood and peritoneal fluid with greater variability in the alkaline range, and lower pH values in the acidic range, lower concentrations of glucose in the range below 8.3 mmol/l, and lower concentrations of lactate in venous blood in the range below 5 mmol/l and in peritoneal fluid in the range below 2 mmol/l, with less variability. On average, the portable analyser underestimated the concentrations of lactate and glucose in peritoneal fluid in comparison with the in-house analyser. Its measurements of the concentrations of sodium and chloride in peritoneal fluid had a higher bias and were more variable than the measurements in venous blood, and its measurements of potassium in venous blood and peritoneal fluid had a smaller bias and less variability than the measurements made with the in-house analyser.

  2. Contents evaluation of some essential and toxic elements in children and elders diet by neutron activation analysis; Avaliacao do conteudo de alguns elementos essenciais e toxicos em dietas de criancas e idosos pelo metodo de analise por ativacao com neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Maihara, Vera Akiko

    1996-12-31

    Essential and toxic elements in the 19 diet samples from pre-school children and 23 diet samples from elderly people, have been determined by neutron activation analysis. The diet samples were collected by duplicate portion method. A radiochemical separation procedure was developed and applied for determining Cd, Co, Cr, Fe, Mo, Sb, U, Th, W and Zn, based on retention of these elements in a Chelex-100 resin. In the case of As and Se, the procedure was based on retention in inorganic exchanger TDO (tin dioxide). The contents of proteins, lipids and carbohydrates were also analysed. The results have been presented and discussed 135 refs., 29 figs., 36 tabs.

  3. Contents evaluation of some essential and toxic elements in children and elders diet by neutron activation analysis; Avaliacao do conteudo de alguns elementos essenciais e toxicos em dietas de criancas e idosos pelo metodo de analise por ativacao com neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Maihara, Vera Akiko

    1997-12-31

    Essential and toxic elements in the 19 diet samples from pre-school children and 23 diet samples from elderly people, have been determined by neutron activation analysis. The diet samples were collected by duplicate portion method. A radiochemical separation procedure was developed and applied for determining Cd, Co, Cr, Fe, Mo, Sb, U, Th, W and Zn, based on retention of these elements in a Chelex-100 resin. In the case of As and Se, the procedure was based on retention in inorganic exchanger TDO (tin dioxide). The contents of proteins, lipids and carbohydrates were also analysed. The results have been presented and discussed 135 refs., 29 figs., 36 tabs.

  4. Analysis of the economic-financial viability of the aeolian energy faced to the new context of the power sector; Analise da viabilidade economico-financeira da energia eolica diante do novo contexto do setor eletrico

    Energy Technology Data Exchange (ETDEWEB)

    Abreu, Virginia Brasil [Companhia Hidro-Eletrica de Sao Francisco (CHESF), Recife, PE (Brazil)], e-mail: virginia@chesf.gov.br; Oliveira, Marcos Roberto Gois de [Universidade de Pernambuco (UPE), Recife, PE (Brazil)], e-mail: mrgois@hotmail.com

    2008-07-01

    This paper analyses the economical-financial viability of a hypothetic aeolian project at the Itaparica, Bahia, Brazil. Brazil presents a great aeolian potential, particularly at the Northeastern region, where various aeolian enterprises had been implanted due to favorable conditions of the wind in that region. However, for the increasing the aeolian generation it is necessary that studies have to be done concerning to the technical viability and, specially the economical-financial viability, because the investors need reliable subsides for the decision making.

  5. Feasibility analysis of installing a natural gas cogeneration system in a slaughterhouse; Analise da viabilidade da implantacao de um sistema de cogeracao de energia a gas natural em um frigorifico

    Energy Technology Data Exchange (ETDEWEB)

    Takaki, Alessandro Tomio; Dib, Fernando Henrique; Campitelli, Flavio Moreti; Romao Junior, Ricardo Agudo; Ramos, Ricardo Alan Verdu [Universidade Estadual Paulista (NUPLEN/UNESP), Ilha Solteira, SP (Brazil). Dept. de Engenharia Mecanica. Nucleo de Planejamento Energetico, Geracao e Cogeracao de Energia], Email: nuplen@dem.feis.unesp.br

    2006-07-01

    In this work the analysis of the viability of implantation of a natural gas cogeneration system in a bovine slaughterhouse is carried out. Among the studied configurations there are the current plant and the modified plant that allow the use of natural gas. For evaluation of the performance, energetic and exegetic analyses for each one of the configurations are carried out. It's also accomplished a thermo economic analysis that makes possible to evaluate the reflexes of the investment and combustible on the composition of the cost of products. (author)

  6. Emergetic analysis of the electrolytic hydrogen production using the secondary energy from the Itaipu Hydroelectric Power Plant; Analise emergetica da producao de hidrogenio eletrolitico aproveitando a energia vertida nao turbinada da Usina Hidroeletrica de Itaipu

    Energy Technology Data Exchange (ETDEWEB)

    Agarussi, Maria Alessandra Silva Nunes; Espinola, Michel Osvaldo Galeano [Universidade Estadual de Campinas (UNICAMP), Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Planejamento de Sistemas Energeticos

    2006-07-01

    Due to the possibility of increase in the energy market in a few years and awareness of the necessity of using the secondary energy in hydroelectric power plants and also concerned about the environmental problems related to energy enterprises, the present paper develops the emergy analyses of electrolytic hydrogen production in the Itaipu Power Plant located in the countries of Brazil and Paraguay. The emergy analyses despite being unknown by the major people and technicians responsible for the development of Environmental Impacts Studies, named EIA/RIMAS in Brazil, represents a way to fulfill all requirements imposed by law and government and also an important manner to internalize externalities in the evaluation of all variables involved in the execution and maintenance of natural and artificial processes. Afterwards, this database can be used to be compared with other actual processes of producing and supplying energy, guiding stake holders when deciding where and how to implement and take advantage of available energy sources. This work aims to evaluate with emergetic criteria the research done by Antonio Carlos Fonseca Santos Jr.: Analysis of the Economic Feasibility of Hydrogen Production in Hydroelectric Power Plants: A Case Study at Itaipu. (author)

  7. ATHENA/INTRA analyses for ITER, NSSR-2

    International Nuclear Information System (INIS)

    Shen, Kecheng; Eriksson, John; Sjoeberg, A.

    1999-02-01

    The present report is a summary report including thermal-hydraulic analyses made at Studsvik Eco and Safety AB for the ITER NSSR-2 safety documentation. The objective of the analyses was to reveal the safety characteristics of various heat transfer systems at specified operating conditions and to indicate the conditions for which there were obvious risks of jeopardising the structural integrity of the coolant systems. In the latter case also some analyses were made to indicate conceivable mitigating measures for maintaining the integrity.The analyses were primarily concerned with the First Wall and Divertor heat transfer systems. Several enveloping transients were analysed with associated specific flow and heat load boundary conditions. The analyses were performed with the ATHENA and INTRA codes

  8. ATHENA/INTRA analyses for ITER, NSSR-2

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Kecheng; Eriksson, John; Sjoeberg, A

    1999-02-01

    The present report is a summary report including thermal-hydraulic analyses made at Studsvik Eco and Safety AB for the ITER NSSR-2 safety documentation. The objective of the analyses was to reveal the safety characteristics of various heat transfer systems at specified operating conditions and to indicate the conditions for which there were obvious risks of jeopardising the structural integrity of the coolant systems. In the latter case also some analyses were made to indicate conceivable mitigating measures for maintaining the integrity.The analyses were primarily concerned with the First Wall and Divertor heat transfer systems. Several enveloping transients were analysed with associated specific flow and heat load boundary conditions. The analyses were performed with the ATHENA and INTRA codes 8 refs, 14 figs, 15 tabs

  9. Methods and procedures for shielding analyses for the SNS

    International Nuclear Information System (INIS)

    Popova, I.; Ferguson, F.; Gallmeier, F.X.; Iverson, E.; Lu, Wei

    2011-01-01

    In order to provide radiologically safe Spallation Neutron Source operation, shielding analyses are performed according to Oak Ridge National Laboratory internal regulations and to comply with the Code of Federal Regulations. An overview of on-going shielding work for the accelerator facility and neutrons beam lines, methods used for the analyses, and associated procedures and regulations are presented. Methods used to perform shielding analyses are described as well. (author)

  10. SENSITIVITY ANALYSIS FOR SALTSTONE DISPOSAL UNIT COLUMN DEGRADATION ANALYSES

    Energy Technology Data Exchange (ETDEWEB)

    Flach, G.

    2014-10-28

    PORFLOW related analyses supporting a Sensitivity Analysis for Saltstone Disposal Unit (SDU) column degradation were performed. Previous analyses, Flach and Taylor 2014, used a model in which the SDU columns degraded in a piecewise manner from the top and bottom simultaneously. The current analyses employs a model in which all pieces of the column degrade at the same time. Information was extracted from the analyses which may be useful in determining the distribution of Tc-99 in the various SDUs throughout time and in determining flow balances for the SDUs.

  11. Analysing harmonic motions with an iPhone’s magnetometer

    Science.gov (United States)

    Yavuz, Ahmet; Kağan Temiz, Burak

    2016-05-01

    In this paper, we propose an experiment for analysing harmonic motion using an iPhone’s (or iPad’s) magnetometer. This experiment consists of the detection of magnetic field variations obtained from an iPhone’s magnetometer sensor. A graph of harmonic motion is directly displayed on the iPhone’s screen using the Sensor Kinetics application. Data from this application was analysed with Eureqa software to establish the equation of the harmonic motion. Analyses show that the use of an iPhone’s magnetometer to analyse harmonic motion is a practical and effective method for small oscillations and frequencies less than 15-20 Hz.

  12. Relevant aspects in the analysis and accompaniment of projects with focus in maintenance of great machines; Aspectos relevantes na analise e acompanhamento de projetos com foco em manutencao de grandes maquinas

    Energy Technology Data Exchange (ETDEWEB)

    Silva, Rogerio Alexandre Francisco da; Santos, Daniel Borges dos; Caleiras, Robson Santos; Souza, Derlan Santos de; Freitas, Fernando de; Silva, Alisson Cardoso Gomes da [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    This work approaches the excellent aspects for analysis and monitoring of the execution of projects of great machines, in function of the characteristics of these equipment and portrays the actions taken in this process in the scope of the UNBS for the team of Engineering of Production (ENGP). Of this form, the analyses of the dimensional aspects, of leaves of verification and inspection, of Factory Acceptance Test (FAT) and of the preparations for commissioning and departure are distinguished, in order to guarantee the availability and efficiency of the equipment. In its conclusion, the work evaluates the benefits waited with the adjusted accompaniment of the project and suggests action to improve the process of accompaniment of future projects, assuring the good detailing of the project and the success in its implementation. (author)

  13. Assimilation of the QuikScat satellite data into models of oil spill path analysis; Assimilacao dos dados do satelite QuikScat em modelos de analise de trajetoria de derrames de oleo

    Energy Technology Data Exchange (ETDEWEB)

    Baptista, Marlos Carneiro; Cabral, Alexandre Pereira; Silva Junior, Carlos Leandro [OCEANSAT - Tecnologia Espacial para Monitoramento Ambiental S/C Ltda., Rio de Janeiro, RJ (Brazil)]. E-mail: oceansat@inc.coppe.ufrj.br; Landau, Luiz [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia]. E-mail: landau@lamce.ufrj.br

    2001-07-01

    This work analyses the performance and reliability of the wind data measured by the QuikScat satellite. The Scatterometer data was compared with previously published results, based on data from ERS-1/2 Wind Scatterometer, meteo-ocean buoys and from re-analysis of NCEP model. To validate and applied the QuikScat data a case study was performed, on which those data was used to improve the performance of an oil trajectory analysis model, simulating and oil spill in the Campos Basin region. It was observed that the results of the modelling reached better results when wind data collected by the QuikScat satellite was used as a forcing mechanism. Together with other applications, the assimilation of these data into models can be seen as an essential tool in environmental monitoring. (author)

  14. Analysis of oil content and oil quality in oilseeds by low-field NMR; Analise do teor e da qualidade dos lipideos presentes em sementes de oleaginosas por RMN de baixo campo

    Energy Technology Data Exchange (ETDEWEB)

    Constantino, Andre F.; Lacerda Junior, Valdemar; Santos, Reginaldo B. dos; Greco, Sandro J.; Silva, Renzo C.; Neto, Alvaro C.; Barbosa, Lucio L.; Castro, Eustaquio V.R. de [Universidade Federal do Espirito Santo (UFES), Vitoria, ES (Brazil). Departamento de Quimica; Freitas, Jair C.C. [Universidade Federal do Espirito Santo (UFES), Vitoria, ES (Brazil). Departamento de Fisica

    2014-07-01

    To choose among the variety of oleaginous plants for biodiesel production, the oil content of several matrices was determined through different low-field {sup 1}H nuclear magnetic resonance (NMR) experiments with varied pulse sequences, namely single-pulse, spin-echo, CPMG, and CWFP. The experiments that involved the first three sequences showed high correlation with each other and with the solvent extraction method. The quality of the vegetable oils was also evaluated on the basis of the existing correlation between the T{sub 2} values of the oils and their properties, such as viscosity, iodine index, and cetane index. These analyses were performed using HCA and PCA chemometric tools. The results were sufficiently significant to allow separation of the oleaginous matrices according to their quality. Thus, the low-field {sup 1}H NMR technique was confirmed as an important tool to aid in the selection of oleaginous matrices for biodiesel production. (author)

  15. Use of activation analysis method for determining trace elements in human nail clippings; Aplicacao do metodo de analise por ativacao a determinacao de elementos tracos em aparas de unhas humanas

    Energy Technology Data Exchange (ETDEWEB)

    Aguiar, Amilton Reinaldo; Saiki, Mitiko [Instituto de Pesquisas Energeticas e Nucleares (IPEN), Sao Paulo, SP (Brazil)

    1999-11-01

    This work presents results obtained in nail clipping samples analyses. These nail samples were collected from healthy group of individuals and from patients with cystic fibrosis disease. Irradiation of nail clippings was carried out with a thermal neutron flux from 10{sup 11} to 10{sup 13} n.cm{sup -2}.s{sup -1} at the IEA-R1m nuclear research reactor and the elements Al, As, Br, Ca, cd, Cl, Co, Cr, Cu, Fe, K, Mg, Mn, Na, Se and Zn were determined. The results obtained for healthy group were within the range of concentrations published, for normal population. However for several elements, the group of patients presented higher concentrations than those presented for healthy individuals. The precision and the accuracy of the results were evaluated by analyzing reference materials NIST 1577b Bovine Liver and 1566a Oyster Tissue. (author) 6 refs., 4 tabs.

  16. Discrete frequency identification using the HP 5451B Fourier analyser

    International Nuclear Information System (INIS)

    Holland, L.; Barry, P.

    1977-01-01

    The frequency analysis by the HP5451B discrete frequency Fourier analyser is studied. The advantages of cross correlation analysis to identify discrete frequencies in a background noise are discussed in conjuction with the elimination of aliasing and wraparound error. Discrete frequency identification is illustrated by a series of graphs giving the results of analysing 'electrical' and 'acoustical' white noise and sinusoidal signals [pt

  17. A Java Bytecode Metamodel for Composable Program Analyses

    NARCIS (Netherlands)

    Yildiz, Bugra Mehmet; Bockisch, Christoph; Rensink, Arend; Aksit, Mehmet; Seidl, Martina; Zschaler, Steffen

    Program analyses are an important tool to check if a system fulfills its specification. A typical implementation strategy for program analyses is to use an imperative, general-purpose language like Java; and access the program to be analyzed through libraries for manipulating intermediate code, such

  18. Finite strain analyses of deformations in polymer specimens

    DEFF Research Database (Denmark)

    Tvergaard, Viggo

    2016-01-01

    Analyses of the stress and strain state in test specimens or structural components made of polymer are discussed. This includes the Izod impact test, based on full 3D transient analyses. Also a long thin polymer tube under internal pressure has been studied, where instabilities develop, such as b...

  19. Multipole analyses and photo-decay couplings at intermediate energies

    International Nuclear Information System (INIS)

    Workman, R.L.; Arndt, R.A.; Zhujun Li

    1992-01-01

    The authors describe the results of several multipole analyses of pion-photoproduction data to 2 GeV in the lab photon energy. Comparisons are made with previous analyses. The photo-decay couplings for the delta are examined in detail. Problems in the representation of photoproduction data are discussed, with an emphasis on the recent LEGS data. 16 refs., 4 tabs

  20. Houdbaarheid en conservering van grondwatermonsters voor anorganische analyses

    NARCIS (Netherlands)

    Cleven RFMJ; Gast LFL; Boshuis-Hilverdink ME; LAC

    1995-01-01

    The storage life and the possibilities for preservation of inorganic analyses of groundwater samples have been investigated. Groundwater samples, with and without preservation with acid, from four locations in the Netherlands have been analysed ten times over a period of three months on six

  1. Uranium price trends for use in strategy analyses

    International Nuclear Information System (INIS)

    James, R.A.

    1979-09-01

    Long-term price forecasts for mined uranium are quoted. These will be used in Ontario Hydro's nuclear fuel cycle strategy analyses. They are, of necessity, speculative. The accuracy of the forecasts is considered adequate for long-term strategy analyses, but not for other purposes. (auth)

  2. 46 CFR Appendix B to Part 154 - Stress Analyses Definitions

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Stress Analyses Definitions B Appendix B to Part 154...—Stress Analyses Definitions The following are the standard definitions of stresses for the analysis of an independent tank type B: Normal stress means the component of stress normal to the plane of reference...

  3. Aftaler om arbejdsmiljø - en analyse af udvalgte overenskomster

    DEFF Research Database (Denmark)

    Petersen, Jens Voxtrup; Wiegmann, Inger-Marie; Vogt-Nielsen, Karl

    En analyse af overenskomsters betydning for arbejdsmiljøet indenfor industri, slagterier, rengøring, det grønne område, hotel og restauration og busdrift.......En analyse af overenskomsters betydning for arbejdsmiljøet indenfor industri, slagterier, rengøring, det grønne område, hotel og restauration og busdrift....

  4. Assessment of atmospheric pollution of chemical elements by epiphytic lichen analysis at the Campus of the Sao Paulo University; Avaliacao da poluicao atmosferica de elementos quimicos pela analise de liquen epifitico no Campus da Cidade Universitaria de Sao Paulo

    Energy Technology Data Exchange (ETDEWEB)

    Rocha, Rosiana Rocho

    2015-07-01

    Air pollution has been a frequent topic of research, due to the effects that it can cause on the health of living organisms, environment and climate. In order to identify pollution sources and their effects, biomonitoring has been studied due to its low cost and possibility of sampling in wide geographic areas. In this study for passive biomonitoring of air pollution levels at the Cidade Universitaria Armando Salles de Oliveira (CUASO), University of Sao Paulo campus, epiphytic lichens of Canoparmelia texana species were used. The lichens collected from tree barks at different sampling sites in the CUASO were cleaned, freeze-dried and ground for analyses. Lichen samples were analyzed by X - ray fluorescence spectrometry (XRFS) and neutron activation analysis (NAA). For XRFS, cylindrical pellets of samples were prepared to determine As, Br, Ca, Cl, Cr, Cu, Fe, K, Mn, Rb, S, Sr and Zn. For NAA, lichen sample aliquots along with synthetic elemental standards were irradiated both for short and long periods at the IEA-R1 nuclear research reactor. The induced activities were measured by a gamma ray spectrometer to determine As, Br, Ca Cd, Cl, Co, Cr, Cs, Cu, Fe, K, La, Mg, Mn, Rb, Sb, Sc, Se, U, V and Zn. The precision and accuracy of the results were evaluated by the analysis of certified reference materials (MRCs). Their results of relative errors and standard deviations were below 15% for most of the elements. The standardized difference or En score values were lower than |1| indicating satisfactory results. Replicate analyses of a lichen sample by XRFS and NAA, indicated good homogeneity of the sample for the elements determined. The lichen results showed that the mean concentrations of As, Br, Ca, Cd, Co, Cr, Cs, Rb, Sb, Se and U were higher in samples from CUASO than those from regions considered unpolluted. For Fe, K, La, S, V and Zn, they were of the same order of magnitude. The correlation study between the elements showed high correlation (r > 0.7) for elements

  5. ANALISIS METODOLÓGICO PARA LA MODELACIÓN DE LA SEGURIDAD ALIMENTARIA A NIVEL NACIONAL ANALISE METODOLÓGICO PARA A MODELAÇÃO DE A SEGURIDADE ALIMENTAR A NÍVEL NACIONAL METHODOLOGICAL ANALYSIS TO MODELING FOOD SECURITY FROM A NATIONAL PERSPECTIVE

    Directory of Open Access Journals (Sweden)

    DIANA P GIRALDO

    2010-06-01

    Full Text Available La comunidad científica y política ha incrementado el interés por entender e intervenir el problema de seguridad alimentaria, especialmente desde la crisis alimentaria en la década de los 70's. Diferentes estrategias metodológicas han sido utilizadas con el ánimo de proyectar, predecir y evaluar políticas como soporte para la toma de decisiones en el sector público. Este artículo explora un conjunto de metodologías usadas para el estudio de la seguridad alimentaria a nivel nacional, herramientas estratégicas para una apropiada formulación, evaluación y aplicación de políticas. Se discute el potencial uso de metodologías complementarias al análisis tradicional, especialmente la Dinámica de Sistemas, como una herramienta de simulación que permite el análisis de relaciones causales, el establecimiento de variables críticas y la evaluación de escenarios a favor de una efectiva toma de decisionesA comunidade científica e política hão acrescentado o interesse por entender e intervir o problema de seguridade alimentar, especialmente, desde a crise alimentar na década dos 70's. Diferentes estratégias metodológicas hão sido utilizadas com o interesse de projetar, predizer e avaliar políticas como suportes para a toma de decisões no setor público. Este artigo explora um conjunto de metodologias empregadas no estudo da seguridade alimentar a nível nacional, ferramentas estratégicas para uma apropriada formulação, avaliação e aplicação de políticas. Discutese o potencial uso de metodologias complementárias à análise tradicional, especialmente a Dinâmica de Sistemas, como ferramentas de simulação que permite a analise de relações causais, o estabelecimento de variáveis críticas e a avaliação de cenários a favor de uma toma de decisõesThe scientific and politic community has had increasing concerns for strategic understanding and intervention of the food security problem, especially since the 70's food

  6. Métodos de analise dos danos da lagarta da espiga¹, em médias de gerações envolvendo IAC Maya e Zapalote Chico Method for analysis of damage of the corn earworm heliothis zea in generation means from IAC Maya and Zapalote Chico

    Directory of Open Access Journals (Sweden)

    Jorge Alberto Marques Rezende

    1982-01-01

    utilizing the revised scale described by WIDSTROM (27. The data obtained was analised by two different ways. The grades were distributed at first in two different classes: grades 0 and 1 and grades > 2. The grades were afterwards distributed in the following two classes: grades 0 and grades > 1. The chi-square test was applied to verify which of the two types of classes adjusts better with their respective expected ratios. The results showed that when the grades were divided in the classes 0+1 and > 2 the data were more uniform within each treatment. The analysis of variance for each damage class separately, presented F values highly significant for the classes zero and zero plus one, whereas for the classes > 1 and > 2 the damage averages were very similar and the F values were not significant. The class zero plus one had F value higher and the coefficient of variation smaller than the class zero. The ZC 2451 corn compared to the variety IAC Maya XII, exibited good resistance to the corn earworm, under the field conditions of Campinas, State of São Paulo, Brazil. This resistance is of the type non preference and or antibiosis, because there was a higher percentage of ears of ZC 2451 free of earworm damage.

  7. Manganese determination om minerals by activation analysis, using the californium-252 as a neutron source; Determinacao de manganes em minerios, por analise por ativacao, usando californio-252 como fonte de neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Cardoso, Antonio

    1976-07-01

    Neutron Activation Analysis, using a Californium-252 neutron source, has been applied for the determination of manganese in ores such as pyrolusite, rodonite (manganese silicate)' and blending used in dry-batteries The favorable nuclear properties of manganese, such as high thermal neutron cross-section for the reaction {sup 55}Mn (n.gamma){sup 56} Mn, high concentration of manganese in the matrix and short half - life of {sup 56}Mn, are an ideal combination for non-destructive analysis of manganese in ores. Samples and standards of manganese dioxide were irradiated for about 20 minutes, followed by a 4 to 15 minutes decay and counted in a single channel pulse-height discrimination using a NaI(Tl) scintillation detector. Counting time was equal to 10 minutes. The interference of nuclear reactions {sup 56}Fe(n,p){sup 56}Mn and {sup 59} Co (n, {alpha}){sup 56} were studied, as well as problems in connection with neutron shadowing during irradiation, gamma-rays attenuation during counting and influence of granulometry of samples. One sample,was also analysed by wet-chemical method (sodium bismuthate) in order to compare results. As a whole, i t was shown that the analytical method of neutron activation for manganese in ores and blending, is a method simple, rapid and with good precision and accuracy. (author)

  8. Identification and analysis of local and regional impacts from the introduction of biodiesel production in the state of Piaui, Brazil; Identificacao e analise dos impactos locais e regionais da introducao da producao de biodiesel no estado do Piaui

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Omar Inacio Benedetti; Rathmann, Regis [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Coordenacao dos Programas de Pos-Graduacao de Engenharia (COPPE). Programa de Planejamento Energetico; Padula, Antonio Domingos [Universidade Federal do Rio Grande do Sul (UFRGS), Porto Alegre, RS (Brazil)

    2008-07-01

    The recent moves towards the insertion of biofuels in the energy matrix of a number of countries are opening new prospects for agricultural production and for agroindustrial chains. This study aims at understanding the mechanisms taking place within a production system geared towards biodiesel production. The emergence of this new productive base raises new research issues: in what circumstances are the structuring, organization and implementation of these biodiesel productive chains taking place in Brazil? What are the effects of biodiesel production on local economies? Hence, the central objective of this study is the development and validation of an analytical structure capable of characterizing the biodiesel productive arrangements and identifying their economic and social impacts at the regions where they are installed. A preliminary analysis identified that a biodiesel productive arrangement is emerging in the State of Piaui, Northeastern Brazil, Our theoretical basis comprises elements from the regional economy, biorefineries, local production arrangements and innovation. For the analyses, we employed the methods of input-output, local quotient and shift-share. It can be said that a new social-economic dynamics is taking place in Piaui; however, the company needs to assess its interaction with local institutions as well as its castor bean production strategies. (author)

  9. Methodology to characterize an unsampled oil interval, integrating PVT (Pressure/Volumen/Temperature) analysis and production log; Metodologia para caracterizacao de oleo de intervalo nao-amostrado, integrando analise PVT e perfil de producao

    Energy Technology Data Exchange (ETDEWEB)

    Marcon, Diogo Reato; Souza, Ana Paula Martins de; Vieira, Alexandre J.M. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    This work presents a new methodology for characterizing an unsampled oil interval, using basically production log data and PVT analyses available in the well. The methodology was applied to a real case, where the live oil samples were collected during a well test run in three different depths, revealing some evidence of a compositional grading due to gravity. Each individual sample was a mixture of the fluid produced from the reservoir bottom to the sampling point, since the whole interval was perforated and the isolation had to be made with a packer. The first sample was corresponding to the mixture of lower and all upper oils. The other two samples are only the heavier and that oil with part of the one from the upper interval. In order to identify the fluid properties from the upper interval, needed for production development studies, the following procedure was devised: equation-of-state tuning, reproducing the sampled fluid properties; conversion of volumetric flowrates from production log into mass and molar flowrates; flowrate ratio calculation, between the upper and lower intervals; upper interval fluid composition estimative; upper interval fluid properties simulation, using the previously tuned equation-of-state, thus generating what was considered a representative, synthetic PVT analysis. (author)

  10. Analysis of water flow, power and electrical current of a motor pump powered by photovoltaic panels; Analise da vazao, potencia e corrente em uma motobomba acionada por paines fotovoltaicos

    Energy Technology Data Exchange (ETDEWEB)

    Oyama, Paulo Takashi; Santos, Jose Airton Azevedo dos; Michels, Roger Nabeyama [Universidade Tecnologica Federal do Parana (UTFPR-MD), Medianeira, PR (Brazil)], E-mail: airton@utfpr.edu.br; Ricieri, Reinaldo Prandini [Universidade do Oeste Paulista (UNIOESTE), Cascavel, PR (Brazil). Dept. de Engenharia Agricola], E-mail: ricieri@unioeste.br; Halmeman, Maria Cristina Rodrigues [Universidade Tecnologica Federal do Parana (UTFPR-CM), Campo Mourao, PR (Brazil)

    2009-07-01

    Because of the high cost of electricity connection to distant places, far away from conventional nets, photovoltaic solar energy is widely used in public illumination, water pumping, medical care centers, etc. With the purpose to contribute to a better utilization in this type of energy, the object of the project is to analyze the water flow, power and electrical current of a motor pump to be used for water lift, driven by photovoltaic panels, the data will be collected at every 2 meters in height from 2.2 to 18.2 meters. The analyses show the outflow linear dependence in relation to the height of the water lift, a second order dependence of the electrical power provided by the photovoltaic panels in relation to the solar irradiance on the panels and a linear dependence of the electrical current in relation to the solar irradiance. This study is a part of a project developed at the 'Universidade Tecnologica Federal do Parana' (UTFPR) - Campus Medianeira - PR. Two photovoltaic panels were used from Solarex Brand, model MSX 56, a motor pump made by Shurflo Ltd, model 2088-732, two pyranometers from KIPP and ZONEN CM3, a type K thermocouple, a pressure transducer model HUBA-510 and a water flow transducer. (author)

  11. Manganese determination om minerals by activation analysis, using the californium-252 as a neutron source; Determinacao de manganes em minerios, por analise por ativacao, usando californio-252 como fonte de neutrons

    Energy Technology Data Exchange (ETDEWEB)

    Cardoso, Antonio

    1976-07-01

    Neutron Activation Analysis, using a Californium-252 neutron source, has been applied for the determination of manganese in ores such as pyrolusite, rodonite (manganese silicate)' and blending used in dry-batteries The favorable nuclear properties of manganese, such as high thermal neutron cross-section for the reaction {sup 55}Mn (n.gamma){sup 56} Mn, high concentration of manganese in the matrix and short half - life of {sup 56}Mn, are an ideal combination for non-destructive analysis of manganese in ores. Samples and standards of manganese dioxide were irradiated for about 20 minutes, followed by a 4 to 15 minutes decay and counted in a single channel pulse-height discrimination using a NaI(Tl) scintillation detector. Counting time was equal to 10 minutes. The interference of nuclear reactions {sup 56}Fe(n,p){sup 56}Mn and {sup 59} Co (n, {alpha}){sup 56} were studied, as well as problems in connection with neutron shadowing during irradiation, gamma-rays attenuation during counting and influence of granulometry of samples. One sample,was also analysed by wet-chemical method (sodium bismuthate) in order to compare results. As a whole, i t was shown that the analytical method of neutron activation for manganese in ores and blending, is a method simple, rapid and with good precision and accuracy. (author)

  12. Increasing the complexity of a refinery: a analysis of the economic impacts of the introduction of new process in refineries; O aumento da complexidade de uma refinaria: uma analise dos impactos economicos da introducao de novos processos em refinarias

    Energy Technology Data Exchange (ETDEWEB)

    Fontes, Cristiane M; Seidl, Peter R [Universidade Federal do Rio de Janeiro (UFRJ), RJ (Brazil). Escola de Quimica

    2008-07-01

    The importance of the refining segment in the oil productive chain turns decision making on production and investment to be made at refineries dependent upon general context of the oil industry. Several technical and economic factors limit the possibilities to be foreseen by the managers. The ultimate goal of a refinery is to meet market demand in a region. Moreover, the type of processed oil and refining techniques will shape the profile of the production of derivatives. In a segment dynamic and full of uncertainties, such as refining, where the type of oil supplied to processing, specifications of products, and their demands, changes in the course of time, how to keep refining margins acceptable? This paper presents the relationship between the characteristics and the use of different kinds of oil, the characteristics of the national market of derivatives, and some characteristics of the refining processes considered in the study. The possible economic impacts that the introduction of different processes can bring to a refinery are analysed and alternatives for expansion are evaluated. To achieve these goals, a methodology for analysis considering the yield of Marlin oil refining for different schemes has been developed. (author)

  13. CO{sub 2} emissions generated by the economic activity in Brazil: a decomposition analysis; Emissoes de CO{sub 2} gerados pela atividade economica no Brasil: uma analise de decomposicao

    Energy Technology Data Exchange (ETDEWEB)

    Medeiros, Hercules Souza de; Dezidera, Daniela Arduino [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Programa de Planejamento de Sistemas Energeticos; br, danidezidera@igmail com

    2006-07-01

    The present article intends to estimate the direct and indirect emissions of carbon dioxide through of the Brazilian economy official data (IBGE) and data from the National Energy Balance (BEN), trying to correlate the results. For this, the decomposition methodology was used by indexes (IDA). In that sense, evaluations were made in the temporary variations of indicators as: pollution coefficient, energy intensity, effect structures and economical activity. Besides the evaluation of the results consolidated for the period 1970 - 2004, it was compared such results with the one of other countries, whose savings have relative similarity with the Brazilian economy. The results demonstrated that in Brazil and in the countries where the methodology was applied was obtained, as main indicator in the alterations of the emissions of CO{sub 2}, the level of economical growth, which is also reality to Brazil. However, it should be emphasized that each case is considered by other factors. Another contribution of the present study refers the comparison of the intensity of present carbon in the two analysed savings. It identified, still, that the Brazilian energy outlook, for being 'cleaner', propitiates positive impact on carbon emissions results. It was also demonstrated that the increase of the participation of the natural gas in the energy matrix could minimize the carbon intensity effect, mainly as alternative for the power generation and transportation. (author)

  14. CO{sub 2} emissions generated by the economic activity in Brazil: a decomposition analysis; Emissoes de CO{sub 2} gerados pela atividade economica no Brasil: uma analise de decomposicao

    Energy Technology Data Exchange (ETDEWEB)

    Medeiros, Hercules Souza de; Dezidera, Daniela Arduino [Universidade Estadual de Campinas (UNICAMP), SP (Brazil). Programa de Planejamento de Sistemas Energeticos]. E-mails: hercules.medeiros@bg-group.com; danidezidera@igmail.com.br

    2006-07-01

    The present article intends to estimate the direct and indirect emissions of carbon dioxide through of the Brazilian economy official data (IBGE) and data from the National Energy Balance (BEN), trying to correlate the results. For this, the decomposition methodology was used by indexes (IDA). In that sense, evaluations were made in the temporary variations of indicators as: pollution coefficient, energy intensity, effect structures and economical activity. Besides the evaluation of the results consolidated for the period 1970 - 2004, it was compared such results with the one of other countries, whose savings have relative similarity with the Brazilian economy. The results demonstrated that in Brazil and in the countries where the methodology was applied was obtained, as main indicator in the alterations of the emissions of CO{sub 2}, the level of economical growth, which is also reality to Brazil. However, it should be emphasized that each case is considered by other factors. Another contribution of the present study refers the comparison of the intensity of present carbon in the two analysed savings. It identified, still, that the Brazilian energy outlook, for being 'cleaner', propitiates positive impact on carbon emissions results. It was also demonstrated that the increase of the participation of the natural gas in the energy matrix could minimize the carbon intensity effect, mainly as alternative for the power generation and transportation. (author)

  15. The role of CFD computer analyses in hydrogen safety management

    International Nuclear Information System (INIS)

    Komen, E.M.J; Visser, D.C; Roelofs, F.; Te Lintelo, J.G.T

    2014-01-01

    The risks of hydrogen release and combustion during a severe accident in a light water reactor have attracted considerable attention after the Fukushima accident in Japan. Reliable computer analyses are needed for the optimal design of hydrogen mitigation systems, like e.g. passive autocatalytic recombiners (PARs), and for the assessment of the associated residual risk of hydrogen combustion. Traditionally, so-called Lumped Parameter (LP) computer codes are being used for these purposes. In the last decade, significant progress has been made in the development, validation, and application of more detailed, three-dimensional Computational Fluid Dynamics (CFD) simulations for hydrogen safety analyses. The objective of the current paper is to address the following questions: - When are CFD computer analyses needed complementary to the traditional LP code analyses for hydrogen safety management? - What is the validation status of the CFD computer code for hydrogen distribution, mitigation, and combustion analyses? - Can CFD computer analyses nowadays be executed in practical and reliable way for full scale containments? The validation status and reliability of CFD code simulations will be illustrated by validation analyses performed for experiments executed in the PANDA, THAI, and ENACCEF facilities. (authors)

  16. Graphite analyser upgrade for the IRIS spectrometer at ISIS

    International Nuclear Information System (INIS)

    Campbell, S.I.; Telling, M.T.F.; Carlile, C.J.

    1999-01-01

    Complete text of publication follows. The pyrolytic graphite (PG) analyser bank on the IRIS high resolution inelastic spectrometer [1] at ISIS is to be upgraded. At present the analyser consists of 1350 graphite pieces (6 rows by 225 columns) cooled to 25K [2]. The new analyser array, however, will provide a three-fold increase in area and employ 4212 crystal pieces (18 rows by 234 columns). In addition, the graphite crystals will be cooled close to liquid helium temperature to further reduce thermal diffuse scattering (TDS) and improve the sensitivity of the spectrometer [2]. For an instrument such as IRIS, with its analyser in near back-scattering geometry, optical aberration and variation in the time-of-flight of the analysed neutrons is introduced as one moves out from the horizontal scattering plane. To minimise such effects, the profile of the analyser array has been redesigned. The concept behind the design of the new analyser bank and factors that effect the overall resolution of the instrument are discussed. Results of Monte Carlo simulations of the expected resolution and intensity of the complete instrument are presented and compared to the current instrument performance. (author) [1] C.J. Carlile et al, Physica B 182 (1992) 431-440.; [2] C.J. Carlile et al, Nuclear Instruments and Methods In Physics Research A 338 (1994) 78-82

  17. Processo de trabalho de gerência: uma revisão da literatura Processo de trabajo de gerencia: un enfoque sobre las dimensiones del analise Management work process: a focus over analitics' dimensions

    Directory of Open Access Journals (Sweden)

    Regina Célia Ermel

    2003-06-01

    Full Text Available O objetivo deste artigo é identificar como o trabalho de gerência tem sido abordado nas publicações científicas. Tomou-se como objeto a produção bibliográfica sobre gerência produzida entre 1989 a 1999. A coleta de dados envolveu a busca nas bases de dados Medline e Lilacs. Os trabalhos encontrados foram analisados segundo a técnica de Análise de Conteúdo, proposta por Bardin. Os resultados mostraram que 38% das publicações abordavam a dimensão organizacional da gerência; 34% abordavam a dimensão técnica; 9% a dimensão política e 19% articulavam duas ou mais dessas dimensões. A análise da literatura nos indica a necessidade de desenvolver produções científicas que discutam a gerência como um trabalho político, técnico e organizacional.El objetivo de este articulo é identificar cómo el trabajo de gerencia ha sido estudiado en las publicaciones científicas. El objecto de análisis fue la producción bibliografica acerca de la gerencia entre los años de 1989 a 1999. La búsqueda fue hecha en las bases de datos Medline e Lilacs. Ls trabajos encuentrados fueron analisados segun la técnica de Analisis de Contenido, propuesta por Bardin. Los resultados mostraram que 38% das publicaciones abordaban la dimensión organizacional de la gerencia; 34% abordaban la dimensión técnica; 9% abordaban la dimensión política e 19% articulaban dos o más de estas dimensiones. El análisis de la literatura indicó la necesidad de desarrollarse producciones científicas que discutan la gerencia como un trabajo político-técnico y organizacional.The objective of this paper is to identify how the management work has been studied in scientific publications. The bibliography of management produced in 1989 to 1999 was analyzed. The date was collected in Medline and Lilacs data bases. The scientific publications founded, were analysed second the technique of Contents' Analysis, proposal by Bardin. The results showed that 38% described

  18. Structural, petrological and geochronological analysis of the lithotypes from the Pien region (Parana State, Brazil) and adjacences; Analise estrutural, petrologica e geocronologica dos litotipos da Regiao de Pien (PR) e adjacencias

    Energy Technology Data Exchange (ETDEWEB)

    Harara, Ossama Mohamed

    1996-12-31

    The Pien area presents the major geotectonic domains separated by the Pien Shear Zone (PSZ). The northern one is the Rio Pien Granite-Mylonitic Suite composed by calc-alkaline granitoids of Neoproterozoic age. The southern domain is represented by the Amphibolite-Granulite where high grade metamorphism took place at the end of paleoproterozoic time. Considering the identified lithotypes, their geochemical affinity (particularly the Ti, Cr, Ni and REE content) and the geological context observed in the area, a geotectonical model of active continental margin related to subduction SSZ (Supra-Subduction Zone) is proposed. K-Ar on plagioclase from gabbronorites gave Neoproterozoic ages although Sm-Nd whole rock isochron yielded Paleoproterozoic ages. Based in geochemical data, it is proposed that the biotite gneiss and biotite-amphibole-gneiss which occur near the PSZ have a shoshonitic to high-K calc-alkaline features which are characteristic of active continental margins. K-Ar on biotite extracted from these rocks, gave Neoproterozoic ages. The available radiometric data for the Rio Pien mylonitic granitoids show that between 650-595 Ma the generation, deformation and cooling below the isotherm of 250 deg C occurred. On the other hand, the geochronological data for the Agudos do Sul Massif are in the 590-570 Ma interval showing its younger generation. The Sr{sup 87} / Sr{sup 86} initial ratios for both granitoids suggest more involvement of the continental crust in the origins of Agudos do Sul granitic Massif. The analyses of the entire set of the available data for the Pien area allows the suggestion of a geotectonic scenery related to the evolution of an active continental margin during the collages associated to the Brasiliano Cycle 201 refs., 130 figs., 6 tabs., 2 maps

  19. Analysis of the chemical elements behavior in leaves infected with fumagina employing X-ray fluorescence technique; Analise do comportamento de elementos quimicos em folhas infectadas com fumagina atraves da tecnica de fluorescencia de raios-X

    Energy Technology Data Exchange (ETDEWEB)

    Blonski, Maria Selia

    2002-02-01

    Fumagina is produced by the Capnodium fungi, a mushroom from Dothideales order, that lives associated with the yellow aphid (Monelliopsis pecanis), excreting a heavy load of a sugared substance that provides the sooty fungus development, covering, in some cases the totality, of leaves, fruits and branches surfaces. One of the big problems caused by this disease is the physic photosynthesis stuckness, reducing in 98% the active photosynthesis radiation and in 70% the net photosynthesis. This photosynthesis reduction affects the plants carbohydrate reservoirs, resulting in reduced and bad qualified crops. It was employed the Energy Dispersion X-Ray Fluorescence Technique (EDXRF) to study the fumagina disease. The measurements were realized with infected and healthy leaves of citric plants (orange and lemon trees), collected at the Farm School of the State University of Londrina, and also leaves of icsora plant from Piracicaba-SP. Through this technique it was observed a metabolic disorder related to Fe and Ca elements. By comparing the EDXRF spectra of the healthy plant leaves with the infected ones, it was verified that the concentration of Ca is higher than the concentration Fe in leaves of healthy plants, while for the leaves of plants infected with fumagina, it was observed a higher concentration of Fe. Employing EDXRF and the emission/transmission method for the matrix effect correction, samples of the citric plants were also analysed in pellet. The elements K, Ca, Ti, Mn , Fe, Cu and Zn were quantified. It was verified a higher Fe concentration in fumagina samples compared to the samples without fumagina. For all the elements of interest the minimum level of detection found was at the order of {mu}g g{sup -1}. (author)

  20. Structural, petrological and geochronological analysis of the lithotypes from the Pien region (Parana State, Brazil) and adjacences; Analise estrutural, petrologica e geocronologica dos litotipos da Regiao de Pien (PR) e adjacencias

    Energy Technology Data Exchange (ETDEWEB)

    Harara, Ossama Mohamed

    1997-12-31

    The Pien area presents the major geotectonic domains separated by the Pien Shear Zone (PSZ). The northern one is the Rio Pien Granite-Mylonitic Suite composed by calc-alkaline granitoids of Neoproterozoic age. The southern domain is represented by the Amphibolite-Granulite where high grade metamorphism took place at the end of paleoproterozoic time. Considering the identified lithotypes, their geochemical affinity (particularly the Ti, Cr, Ni and REE content) and the geological context observed in the area, a geotectonical model of active continental margin related to subduction SSZ (Supra-Subduction Zone) is proposed. K-Ar on plagioclase from gabbronorites gave Neoproterozoic ages although Sm-Nd whole rock isochron yielded Paleoproterozoic ages. Based in geochemical data, it is proposed that the biotite gneiss and biotite-amphibole-gneiss which occur near the PSZ have a shoshonitic to high-K calc-alkaline features which are characteristic of active continental margins. K-Ar on biotite extracted from these rocks, gave Neoproterozoic ages. The available radiometric data for the Rio Pien mylonitic granitoids show that between 650-595 Ma the generation, deformation and cooling below the isotherm of 250 deg C occurred. On the other hand, the geochronological data for the Agudos do Sul Massif are in the 590-570 Ma interval showing its younger generation. The Sr{sup 87} / Sr{sup 86} initial ratios for both granitoids suggest more involvement of the continental crust in the origins of Agudos do Sul granitic Massif. The analyses of the entire set of the available data for the Pien area allows the suggestion of a geotectonic scenery related to the evolution of an active continental margin during the collages associated to the Brasiliano Cycle 201 refs., 130 figs., 6 tabs., 2 maps

  1. A vector matching method for analysing logic Petri nets

    Science.gov (United States)

    Du, YuYue; Qi, Liang; Zhou, MengChu

    2011-11-01

    Batch processing function and passing value indeterminacy in cooperative systems can be described and analysed by logic Petri nets (LPNs). To directly analyse the properties of LPNs, the concept of transition enabling vector sets is presented and a vector matching method used to judge the enabling transitions is proposed in this article. The incidence matrix of LPNs is defined; an equation about marking change due to a transition's firing is given; and a reachable tree is constructed. The state space explosion is mitigated to a certain extent from directly analysing LPNs. Finally, the validity and reliability of the proposed method are illustrated by an example in electronic commerce.

  2. Systematic Derivation of Static Analyses for Software Product Lines

    DEFF Research Database (Denmark)

    Midtgaard, Jan; Brabrand, Claus; Wasowski, Andrzej

    2014-01-01

    A recent line of work lifts particular verification and analysis methods to Software Product Lines (SPL). In an effort to generalize such case-by-case approaches, we develop a systematic methodology for lifting program analyses to SPLs using abstract interpretation. Abstract interpretation...... for lifting analyses and Galois connections. We prove that for analyses developed using our method, the soundness of lifting follows by construction. Finally, we discuss approximating variability in an analysis and we derive variational data-flow equations for an example analysis, a constant propagation...

  3. Korte narrativer i analyser af beskæftigelsesindsatser

    DEFF Research Database (Denmark)

    Olesen, Søren Peter; Eskelinen, Leena

    2009-01-01

    beskæftigelsesindsatser imødekommes forskningsmetodisk med en relevant strategi for dataindsamling og analyse? og 2) Hvordan kan arbejdsløses synsvinkel relateres til effektstudier og evaluering? Vi tager udgangspunkt i to adskilte udviklingstendenser: en vending i narrativ analyse mod små fortællinger og en ny tilgang...... til evaluering kaldet relationel evaluering. Vi kombinerer disse tendenser i et begreb om korte narrativer om arbejdsidentitet som kvalitativ tilgang til analyse af arbejdslivsperspektiv og konsekvenser af beskæftigelsesindsatser set med de arbejdsløses øjne. Udgivelsesdato: december...

  4. Using Inequality Measures to Incorporate Environmental Justice into Regulatory Analyses

    Science.gov (United States)

    Abstract: Formally evaluating how specific policy measures influence environmental justice is challenging, especially in the context of regulatory analyses in which quantitative comparisons are the norm. However, there is a large literature on developing and applying quantitative...

  5. Optical region elemental abundance analyses of B and A stars

    International Nuclear Information System (INIS)

    Adelman, S.J.

    1984-01-01

    Abundance analyses using optical region data and fully line blanketed model atmospheres have been performed for six moderately sharplined middle to late B-type stars. The derived abundances have values similar to those of the Sun. (author)

  6. Thermodynamic and Quantum Thermodynamic Analyses of Brownian Movement

    OpenAIRE

    Gyftopoulos, Elias P.

    2006-01-01

    Thermodynamic and quantum thermodynamic analyses of Brownian movement of a solvent and a colloid passing through neutral thermodynamic equilibrium states only. It is shown that Brownian motors and E. coli do not represent Brownian movement.

  7. Methods for analysing cardiovascular studies with repeated measures

    NARCIS (Netherlands)

    Cleophas, T. J.; Zwinderman, A. H.; van Ouwerkerk, B. M.

    2009-01-01

    Background. Repeated measurements in a single subject are generally more similar than unrepeated measurements in different subjects. Unrepeated analyses of repeated data cause underestimation of the treatment effects. Objective. To review methods adequate for the analysis of cardiovascular studies

  8. Multielement trace analyses of SINQ materials by ICP-OES

    Energy Technology Data Exchange (ETDEWEB)

    Keil, R.; Schwikowski, M. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-09-01

    Inductively Coupled Plasma Optical Emission Spectrometry was used to analyse 70 elements in various materials used for construction of the SINQ. Detection limits for individual elements depend strongly on the matrix and had to be determined separately. (author) 1 tab.

  9. The MAFLA (Mississippi, Alabama, Florida) Study, Grain Size Analyses

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The MAFLA (Mississippi, Alabama, Florida) Study was funded by NOAA as part of the Outer Continental Shelf Program. Dr. L.J. Doyle produced grain size analyses in the...

  10. Climate Prediction Center (CPC) US daily temperature analyses

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The U.S. daily temperature analyses are maps depicting various temperature quantities utilizing daily maximum and minimum temperature data across the US. Maps are...

  11. Finite element analyses for RF photoinjector gun cavities

    International Nuclear Information System (INIS)

    Marhauser, F.

    2006-01-01

    This paper details electromagnetical, thermal and structural 3D Finite Element Analyses (FEA) for normal conducting RF photoinjector gun cavities. The simulation methods are described extensively. Achieved results are presented. (orig.)

  12. Summary of Prometheus Radiation Shielding Nuclear Design Analyses , for information

    International Nuclear Information System (INIS)

    J. Stephens

    2006-01-01

    This report transmits a summary of radiation shielding nuclear design studies performed to support the Prometheus project. Together, the enclosures and references associated with this document describe NRPCT (KAPL and Bettis) shielding nuclear design analyses done for the project

  13. Book Review: Qualitative-Quantitative Analyses of Dutch and ...

    African Journals Online (AJOL)

    Abstract. Book Title: Qualitative-Quantitative Analyses of Dutch and Afrikaans Grammar and Lexicon. Book Author: Robert S. Kirsner. 2014. John Benjamins Publishing Company ISBN 9789027215772, price ZAR481.00. 239 pages ...

  14. Finite element analyses for RF photoinjector gun cavities

    Energy Technology Data Exchange (ETDEWEB)

    Marhauser, F. [Berliner Elektronenspeicherring-Gesellschaft fuer Synchrotronstrahlung mbH (BESSY), Berlin (Germany)

    2006-07-01

    This paper details electromagnetical, thermal and structural 3D Finite Element Analyses (FEA) for normal conducting RF photoinjector gun cavities. The simulation methods are described extensively. Achieved results are presented. (orig.)

  15. In service monitoring based on fatigue analyses, possibilities and limitations

    International Nuclear Information System (INIS)

    Dittmar, S.; Binder, F.

    2004-01-01

    German LWR reactors are equipped with monitoring systems which are to enable a comparison of real transients with load case catalogues and fatigue catalogues for fatigue analyses. The information accuracy depends on the accuracy of measurements, on the consideration of parameters influencing fatigue (medium, component surface, component size, etc.), and on the accuracy of the load analyses. The contribution attempts a critical evaluation, also inview of the fact that real fatigue damage often are impossible to quantify on the basis of fatigue analyses at a later stage. The effects of the consideration or non-consideration of various influencing factors are discussed, as well as the consequences of the scatter of material characteristics on which the analyses are based. Possible measures to be taken in operational monitoring are derived. (orig.) [de

  16. Selection of interest and inflation rates for infrastructure investment analyses.

    Science.gov (United States)

    2014-12-01

    The South Dakota Department of Transportation (SDDOT) uses engineering economic analyses (EEA) to : support planning, design, and construction decision-making such as project programming and planning, : pavement type selection, and the occasional val...

  17. Economic Analyses of Ware Yam Production in Orlu Agricultural ...

    African Journals Online (AJOL)

    Economic Analyses of Ware Yam Production in Orlu Agricultural Zone of Imo State. ... International Journal of Agriculture and Rural Development ... statistics, gross margin analysis, marginal analysis and multiple regression analysis. Results ...

  18. Analyse des formes et modes traditionnels de communication en ...

    African Journals Online (AJOL)

    Analyse des formes et modes traditionnels de communication en milieu rural ... se situe aussi bien au niveau de la forme verbale que non verbale du langage. ... In fact, expressions of message take place in verbal and no verbal language.

  19. Cogeneration in breweries analysis and simulation of systems for simultaneous generation of power, heat and refrigeration using natural gas; Sistemas de refrigeracao a partir da cogeracao: analise e simulacao de propostas para o caso de cervejarias utilizando gas natural

    Energy Technology Data Exchange (ETDEWEB)

    Gallego, Antonio Garrido

    1998-07-01

    The present work analyses some proposals of cogeneration systems for the simultaneous generation of power, heat and refrigeration in a brewery. The requirements of steam, refrigeration and electricity, as well as the production of beer in a plant of the Antarctica Company, located in Jaguariuna - SP were collected monthly for the year of 1997. Three conceptions of systems using two gas turbines with heat recovery steam generator were then proposed to meet the surveyed demand. The proposals differ in the refrigeration system: the first one uses a traditional ammonia compression system while the second uses an ammonia absorption system, the third proposal is a combination of the compression and absorption systems. These proposals are compared to the present configuration which purchases electricity from the Public Utility for power and refrigeration (using an ammonia compression)system, and fuel oil to generate steam for process heat. The technical, economical and environmental feasibility of the proposals, as well as of the present configuration are discussed on the basis of mass balances, energy balances (first law of Thermodynamics), exergy fluxes (second law analysis), operational and capital cost, based on simulation of the performance of each configuration proposed to meet the monthly electricity, steam and refrigeration requirements for the referred plant. The turbines were chosen so as to meet the peek energy demand of the plant and two cases were simulated for each proposal: turbine operational meets only the demand of the plant and turbine operates at full load, selling electricity for the Public utility. Results obtained show that the current operational costs are higher than any of the proposals presented. The high capital costs of the proposals, though,make them less interesting financially. The simulation of the case of excess electricity to the Public Utility is very attractive, considering the cost of natural gas 3,38 U$/M btu and the fare of 40 U

  20. Elemental abundance analyses with coadded DAO spectrograms: Pt. 5

    International Nuclear Information System (INIS)

    Adelman, S.J.

    1988-01-01

    Elemental abundance analyses of three mercury-manganese stars were performed in a manner consistent with previous analyses of this series. A few correlations are found between the derived abundances and with the effective temperature in accordance with the expectations of radiative diffusion explanations of the derived abundances. The helium abundances are smaller than the value required to sustain the superficial helium convection zone in the atmospheres of these stars. (author)

  1. Analysing Information Systems Security In Higher Learning Institutions Of Uganda

    OpenAIRE

    Mugyenyi Raymond

    2017-01-01

    Information communication technology has increased globalisation in higher learning institution all over the world. This has been achieved through introduction of systems that ease operations related to information handling in the institutions. The paper assessed and analysed the information systems security performance status in higher learning institutions of Uganda. The existing policies that govern the information security have also been analysed together with the current status of inform...

  2. Cooling tower wood sampling and analyses: A case study

    International Nuclear Information System (INIS)

    Haymore, J.L.

    1985-01-01

    Extensive wood sampling and analyses programs were initiated on crossflow and counterflow cooling towers that have been in service since 1951 and 1955, respectively. Wood samples were taken from all areas of the towers and were subjected to biological, chemical and physical tests. The tests and results for the analyses are discussed. The results indicate the degree of wood deterioration, and areas of the towers which experience the most advanced degree of degradation

  3. A protocol for analysing mathematics teacher educators' practices

    OpenAIRE

    Kuzle , Ana; Biehler , Rolf

    2015-01-01

    International audience; Studying practices in a teaching-learning environment, such as professional development programmes, is a complex and multi-faceted endeavour. While several frameworks exist to help researchers analyse teaching practices, none exist to analyse practices of those who organize professional development programmes, namely mathematics teacher educators. In this paper, based on theoretical as well as empirical results, we present a protocol for capturing different aspects of ...

  4. Structural analyses of ITER toroidal field coils under fault conditions

    International Nuclear Information System (INIS)

    Jong, C.T.J.

    1992-04-01

    ITER (International Thermonuclear Experimental Reactor) is intended to be an experimental thermonuclear tokamak reactor testing the basic physics performance and technologies essential to future fusion reactors. The magnet system of ITER consists essentially of 4 sub-systems, i.e. toroidal field coils (TFCs), poloidal field coils (PFCs), power supplies, and cryogenic supplies. These subsystems do not contain significant radioactivity inventories, but the large energy inventory is a potential accident initiator. The aim of the structural analyses is to prevent accidents from propagating into vacuum vessel, tritium system and cooling system, which all contain significant amounts of radioactivity. As part of design process 3 conditions are defined for PF and TF coils, at which mechanical behaviour has to be analyzed in some detail, viz: normal operating conditions, upset conditions and fault conditions. This paper describes the work carried out by ECN to create a detailed finite element model of 16 TFCs as well as results of some fault condition analyses made with the model. Due to fault conditions, either electrical or mechanical, magnetic loading of TFCs becomes abnormal and further mechanical failure of parts of the overall structure might occur (e.g. failure of coil, gravitational supports, intercoil structure). The analyses performed consist of linear elastic stress analyses and electro-magneto-structural analyses (coupled field analyses). 8 refs.; 5 figs.; 5 tabs

  5. Selection, rejection and optimisation of pyrolytic graphite (PG) crystal analysers for use on the new IRIS graphite analyser bank

    International Nuclear Information System (INIS)

    Marshall, P.J.; Sivia, D.S.; Adams, M.A.; Telling, M.T.F.

    2000-01-01

    This report discusses design problems incurred by equipping the IRIS high-resolution inelastic spectrometer at the ISIS pulsed neutron source, UK with a new 4212 piece pyrolytic graphite crystal analyser array. Of the 4212 graphite pieces required, approximately 2500 will be newly purchased PG crystals with the remainder comprising of the currently installed graphite analysers. The quality of the new analyser pieces, with respect to manufacturing specifications, is assessed, as is the optimum arrangement of new PG pieces amongst old to circumvent degradation of the spectrometer's current angular resolution. Techniques employed to achieve these criteria include accurate calliper measurements, FORTRAN programming and statistical analysis. (author)

  6. Study in vitro of dental enamel irradiated with a high power diode laser operating at 960 nm: morphological analysis of post-irradiation dental surface and thermal effect analysis in pulp chamber due to laser application; Estudo in vitro do esmalte dental irradiado com laser de diodo de alta potencia em 960 nm: analise morfologica da superficie dental pos-irradiada e analise do comportamento termico na camara pulpar devido a aplicacao laser

    Energy Technology Data Exchange (ETDEWEB)

    Quinto Junior, Jose

    2001-07-01

    Objectives: This study examines the structural and thermal modifications induced in dental enamel under dye assisted diode laser irradiation. The aim of this study is to verify if this laser-assisted treatment is capable to modify the enamel surface by causing fusion of the enamel surface layer. At the same time, the pulpal temperature rise must be kept low enough in order not to cause pulpar necrosis. To achieve this target, it is necessary to determine suitable laser parameters. As is known, fusion of the enamel surface followed by re-solidification produce a more acid resistant layer. This surface treatment is being researched as a new method for caries prevention. Method and Materials: A series of fourteen identically prepared enamel samples of human teeth were irradiated with a high power diode laser operating at 960 nm and using fiber delivery. Prior to irradiation, a fine layer of cromophorous ink was applied to the enamel surface. In the first part of the experiment the best parameter for pulse duration was determined. In the second part of the experimental phase the same energy density was used but with different repetition rates. During irradiation we monitored the temperature rise in the pulpal cavity. The morphology of the treated samples was analysed under SEM. Results: The morphology of the treated samples showed a homogeneously re-solidified enamel layer. The results of the temperature analysis showed a decrease of the pulpal temperature rise with decreasing repetition rate. Conclusion: With the diode laser it is possible to cause morphological alterations of the enamel surface, which is known to increase the enamel resistance against acid attack, and still maintain the temperature rise in the pulpar chamber below damage threshold. (author)

  7. Development of a system for automatic detection of pellet failures; Desarrollo de un sistema para deteccion automatica de fallas en pastillas

    Energy Technology Data Exchange (ETDEWEB)

    Lavagnino, C E [Comision Nacional de Energia Atomica, San Martin (Argentina). Unidad de Actividad Combustibles Nucleares

    1997-12-31

    Nowadays, the failure controls in UO{sub 2} pellets for Atucha and Embalse reactors are performed visually. In this work it is presented the first stage of the development of a system that allows an automatic approach to the task. For this purpose, the problem has been subdivided in three jobs: choosing the illumination environment, finding the algorithm that detects failures with user-defined tolerance and engineering the mechanic system that supports the desired manipulations of the pellets. In this paper, the former two are developed. a) Finding the illumination conditions that allow subtracting the failure from the normal element surface, knowing, in first place, the cylindrical characteristics of it and, as a consequence, the differences in the light reflection direction and, in second place, the texture differences in relation to the rectification type of the pellet. b) Writing a fast and simple algorithm that allows the identification of the failure following the production specifications. Examples of the developed algorithm are shown. (author). 4 refs.

  8. New Network of Automatic Stations integrated in the CSNs Environmental Radiological Surveillance Network; Nueva Red de Estaciones Automaticas integrada en la Red de Vigilancia Radiologica Ambiental del CSN

    Energy Technology Data Exchange (ETDEWEB)

    Parages Perez del Yerro, C.; Garcia Cadierno, J. P.; Calvin Cuartero, M.

    2016-05-01

    In 1992, the Council put into operation a network comprising 25 automatic stations for continuous monitoring of the radiological quality of the air and the detection of anomalous situations. It has now decided to undertake the renewal and modernisation of these installations, incorporating sensors and automatic connection and communication systems based on the best technology currently available. (Author)

  9. Automatic optimization of a nuclear reactor reload using the algorithm Ant-Q; A otimizacao automatica da recarga nuclear utilizando o algoritmo Ant-Q

    Energy Technology Data Exchange (ETDEWEB)

    Machado, Liana; Schirru, Roberto [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia. Programa de Engenharia Nuclear

    2002-07-01

    The nuclear fuel reload optimization is a NP-Complete combinatorial optimization problem. For decades this problem was solved using an expert's knowledge. From the eighties, however there have been efforts to automatic fuel reload and the more recent ones show the Genetic Algorithm's (GA) efficiency on this problem. Following this trend, our aim is to optimization nuclear fuel reload using Ant-Q, artificial theory based algorithms. Ant-Q's results on the Traveling salesman Problem, which is conceptuality similar to fuel reload, are better than GA's. Ant-Q was tested in real application on the cycle 7 reload of Angra I. Comparing Ant-Q result with the GA's, it can be verified that, even without a local heuristics, the former algorithm, as it superiority comparing the GA in Angra I show. Is a valid technique to solve the nuclear fuel reload problem. (author)

  10. Influence of the temperature in the measurement of the gamma automatic probe Gamma Tracer; Influencia de la temperatura en la medicion de la sonda gamma automatica Gamma Tracer

    Energy Technology Data Exchange (ETDEWEB)

    Caveda R, C.A.; Dominguez L, O.; Alonso A, D. [CPHR, Calle 20 No. 4113 e/41 y 47, Playa, C.P. 11300, A.P. 6195, C.P. 10600 La Habana (Cuba); Montalvan E, A.; Fabelo B, O. [CIAC, Ave. Finlay Km 2 1/2, Rpto. Puerto Principe, Camaguey 70800 (Cuba)]. e-mail: caveda@cphr.edu.cu

    2006-07-01

    In the following work an analysis of the existent relationship among the measurement of the absorbed dose rate in air due to the environmental gamma radiation and the temperature, magnitudes measured to intervals of 10 minutes by the gamma probe Gamma Tracer located in the post of occident of the National Net of Environmental Radiological Surveillance (RNVRA), in the Center of Protection and Hygiene of the Radiations (CPHR) is made. For it its were analyzed near 100,000 measurements corresponding to the period 2004-2005. For a better processing and interpretation of the data, these were analyzed with one frequency time zone and monthly using the Gamma Red software to which was necessary to add it some options. Finally it was submitted the probe to a heating process inside a stove. The results of the carried out experiments confirmed that the absorbed dose rate in air due to the environmental gamma radiation depends potentially of the probe temperature in the range of environmental temperature to which is subjected daily the same one. (Author)

  11. Technological and operational structure of the National Automatic Network for Environmental Radiological Monitoring (RENAMORA); Estructura tecnologica y operativa de la Red Nacional Automatica de Monitoreo Radiologico Ambiental RENAMORA

    Energy Technology Data Exchange (ETDEWEB)

    Martinez G, E.; Lopez G, M.; Aguirre G, J.; Fabian O, R.; Hernandez A, Y., E-mail: elias.martinez@cnsns.gob.mx [Comision Nacional de Seguridad Nuclear y Salvaguardias, Dr. Barragan 779, Col. Narvarte, 03020 Ciudad de Mexico (Mexico)

    2015-09-15

    The Comision Nacional de Seguridad Nuclear y Salvaguardias (CNSNS) in Mexico is a decentralized body, under the Secretaria de Energia whose main mission is to ensure that activities involving nuclear and radioactive materials as well as ionizing radiation sources are carried out with maximum security, considering the current technological developments. In order to monitor the levels of environmental radiation to which the population is exposed, the CNSNS has established a series of radiological monitoring programs that allow characterize the environmental radiation levels in each zone or region in the country; to identify the occurrence of natural or artificial radiological events, such as nuclear tests and accidents in radioactive or nuclear facilities. The National Automatic Network for Environmental Radiological Monitoring (RENAMORA) project was initiated with the support of the IAEA through MEX9/049 project and its purpose is to have a network of instruments that automatically and in real time, transmit information of the gamma radiological environmental status of the national territory and changes occurring in it. This network provides data such as the speed of ambient dose equivalent, temperature and humidity in different regions of the country. The network is composed of 92 stations that are distributed throughout the national territory. The structure of the stations has evolved since its inception, now allowing detection tasks, data transmission and managing them remotely from the main server, which is located in the CNSNS, which is performed a statistical dose for each monitoring station. Each monitoring station is formed in its current structure by a probe detection of gamma radiation, a communication module and associated electronics, a mini Web server DataGATE, a cellular modem and an interface converter. (Author)

  12. Automatic 2D segmentation of airways in thorax computed tomography images; Segmentacao automatica 2D de vias aereas em imagens de tomografia computadorizada do torax

    Energy Technology Data Exchange (ETDEWEB)

    Cavalcante, Tarique da Silveira; Cortez, Paulo Cesar; Almeida, Thomaz Maia de, E-mail: tarique@lesc.ufc.br [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Dept. de Engenharia de Teleinformatica; Felix, John Hebert da Silva [Universidade da Integracao Internacional da Lusofonia Afro-Brasileira (UNILAB), Redencao, CE (Brazil). Departamento de Energias; Holanda, Marcelo Alcantara [Universidade Federal do Ceara (UFC), Fortaleza, CE (Brazil). Fac. de Medicina

    2013-07-01

    Introduction: much of the world population is affected by pulmonary diseases, such as the bronchial asthma, bronchitis and bronchiectasis. The bronchial diagnosis is based on the airways state. In this sense, the automatic segmentation of the airways in Computed Tomography (CT) scans is a critical step in the aid to diagnosis of these diseases. Methods: this paper evaluates algorithms for airway automatic segmentation, using Neural Network Multilayer Perceptron (MLP) and Lung Densities Analysis (LDA) for detecting airways, along with Region Growing (RG), Active Contour Method (ACM) Balloon and Topology Adaptive to segment them. Results: we obtained results in three stages: comparative analysis of the detection algorithms MLP and LDA, with a gold standard acquired by three physicians with expertise in CT imaging of the chest; comparative analysis of segmentation algorithms ACM Balloon, ACM Topology Adaptive, MLP and RG; and evaluation of possible combinations between segmentation and detection algorithms, resulting in the complete method for automatic segmentation of the airways in 2D. Conclusion: the low incidence of false negative and the significant reduction of false positive, results in similarity coefficient and sensitivity exceeding 91% and 87% respectively, for a combination of algorithms with satisfactory segmentation quality. (author)

  13. Automatic detection of flaws in polymer insulators using 3D industrial tomography; Deteccao automatica de vazios em isoladores polimericos por tomografia industrial 3D

    Energy Technology Data Exchange (ETDEWEB)

    Godoi, Walmor Cardoso; Swinka-Filho, Vitoldo [Instituto de Tecnologia para o Desenvolvimento (LACTEC), Curitiba, PR (Brazil)], Emails: walmor@lactec.org.br, vitoldo@lactec.org.br; Geus, Klaus de [Companhia Paranaense de Energia (Copel), Curitiba, PR (Brazil)], Email: klaus@copel.com; Silva, Romeu Ricardo da [SENAI-RJ Solda (CTS/Solda), Rio de Janeiro, RJ (Brazil). Centro de Tecnologia], Email: rrdsilva@firjan.org.br

    2009-10-15

    This work presents a methodology for the automatic detection of flaws in polymer insulators using three-dimensional industrial computed tomography (CT), as well as results obtained in the context of power distribution networks. The CT slices were reconstructed using 180 digital radiographs (projections) acquired by a high resolution system (pixel dimension of 50 {mu}m x 50 {mu}m, a-Si). For the reconstruction of 3D CT, 50 {mu}m wide bit map slices were used. The Marching Cubes algorithm was used to perform the 3D reconstruction, using the Visualization Tool kit (VTK) library and the Java programming language (64 Bits Linux platform). Nine features were obtained from the reconstructed three-dimensional objects for the neural networks training. Results showed to be satisfactory. (author)

  14. Construction and final assembly of an automatic arc welding machine; Construccion y puesta a punto de una maquina automatica para soldadura remota por arco bajo atmosfera inerte

    Energy Technology Data Exchange (ETDEWEB)

    Herrero Alvarez, J; Diaz Diaz, J; Diaz Diaz, J L

    1972-07-01

    It has been constructed a remote are welding machine, wholly transistorized, to be used in a Hot Cell of 1.000 Cu. In this work are presented the different parts of the equipment and its electronic description. Finally, some works of final preparation are shown such as ending of irradiation capsules, thermocouples welding, stainless steel cover welding. For these types of welding are quoted its relative programs. (Author)

  15. Emergency automatic commutation of the ventilation system of the RP-10 nuclear reactor; Conmutacion automatica de emergencia del sistema de ventilacion del reactor nuclear RP-10

    Energy Technology Data Exchange (ETDEWEB)

    Castillo, Walter; Corimanya, Mario; Ovalle, Edgar; Anaya, Olgger; Veramendi, Emilio [Direccion de Produccion, Instituto Peruano de Energia Nuclear, Av. Jose Saco km 12.5, Carabayllo, Lima (Peru)

    2013-07-01

    The present paper summarizes the achievements in the design and implementation of a system for monitoring and automatic control of radioactive effluents from the chimney of the RP-10 reactor, using as hardware an Arduino UNO platform containing an ATMEGA 328 programmable micro controller to which has been added LCD screen to display the values, a keyboard and an EEPROM memory data, where the limit of the level of radiation is fixed. The radiation level in the air of the reactor hall, going up the chimney is counted by a radiation monitor called MAB1000, and data are supplied to the new system. When the radiation level is above the national and international standards, the new design makes work a relay, so that the ventilation system is automatically switched to operate in emergency condition, preventing the release of radioactive contaminants into the environment. After installing the new design, it was verified that removed by the radiation monitor MAB1000, value is identical to that shown in the new system. Additionally, the operation of the relay was tested successfully with radioactive sources to switch the ventilation system to the emergency condition. (authors).

  16. An automatic approach for nondestructive radiographic inspection of pipeline weld joint; Uma abordagem automatica aplicada a inspecao radiografica nao-destrutiva de soldas em tubulacoes

    Energy Technology Data Exchange (ETDEWEB)

    Felisberto, Marcelo K.; Schneider, Guilherme A.; Centeno, Tania M.; Arruda, Lucia V.R. de [Centro Federal de Educacao Tecnologica do Parana, Curitiba, PR (Brazil). CPGEI - Programa de Pos-graduacao em Engenharia Eletrica e Informatica Industrial

    2005-07-01

    The current work contributes to the research in the area of pipelines non-destructive testing by presenting new methodologies for the automatic analysis of welds radiographs. Object recognition techniques based on genetic algorithms were used for the automatic weld bead detection. In addiction, an image digital filter was also tested in the weld bead images and, as a result, supposed defects are highlighted, making them easier to be detected. These methodologies were tested for 120 digital radiographs from carbon steel pipeline welded joints. These images were acquired by a storage phosphor system, using double-wall radiographic exposing technique with single-wall radiographic viewing, according to the ASME V code. As a result, even human vision hard-perceptible defects are automatically highlighted and extracted from the whole image to be separately analyzed. (author)

  17. Neutron activation analysis applied to the determination of trace elements in human nails; Aplicacao do metodo de analise por ativacao com neutrons a determinacao de elementos traco em unhas humanas

    Energy Technology Data Exchange (ETDEWEB)

    Aguiar, Amilton Reinaldo

    2001-07-01

    There is a considerable interest in the determination of trace elements in human nails in order to use this tissue as a monitor of nutritional and healthy status of individuals, of occupational exposure diseases and of the environmental contamination. In this work, instrumental neutron activation analysis was applied to determine trace elements in finger nail clippings to make comparisons between the elemental concentrations obtained in nails from healthy individuals of a control group and those from cystic fibrosis (CF) patients. Firstly, a protocol for sample collection and preparation for analysis was established. Finger and toe nail samples from CF patients were collected at the Instituto da Crianca of Medicine School, University of Sao Paulo, SP. The nail samples from control group were collected from healthy adults and from children living in Sao Paulo city, SP. These samples were cleaned by stirring them witha a diluted Triton X100 solution and then by washing with distilled water and acetone. The analytical procedure consisted of irradiation nail samples and elemental standards in the IEA-R1m nuclear reactor under thermal neutro flux of about 10{sup 12} n cm{sup -2} s{sup -1}, for short and long period irradiations. The activities of the radionuclides were measured using a gamma-ray spectrometer comprising an hyperpure Ge detector and associated electronic system. The biological reference materials Bovine Liver 1577b and Oyster Tissue 1566a, both from National Institute of Standards and Technology, USA were analysed in order to evaluate the accuracy and precision of the results. The analysis of variance (ANOVA) and F-test at the significance level of 5% were used to make a comparison between the sets of results obtained in this work. In the comparison of the results obtained for finger and toe nails from CF patients, the Br concentrations were higher in finger nails that those obtained for toe nails. For the control group of children, the finger nails

  18. Accelerated safety analyses - structural analyses Phase I - structural sensitivity evaluation of single- and double-shell waste storage tanks

    International Nuclear Information System (INIS)

    Becker, D.L.

    1994-11-01

    Accelerated Safety Analyses - Phase I (ASA-Phase I) have been conducted to assess the appropriateness of existing tank farm operational controls and/or limits as now stipulated in the Operational Safety Requirements (OSRs) and Operating Specification Documents, and to establish a technical basis for the waste tank operating safety envelope. Structural sensitivity analyses were performed to assess the response of the different waste tank configurations to variations in loading conditions, uncertainties in loading parameters, and uncertainties in material characteristics. Extensive documentation of the sensitivity analyses conducted and results obtained are provided in the detailed ASA-Phase I report, Structural Sensitivity Evaluation of Single- and Double-Shell Waste Tanks for Accelerated Safety Analysis - Phase I. This document provides a summary of the accelerated safety analyses sensitivity evaluations and the resulting findings

  19. The SNS target station preliminary Title I shielding analyses

    International Nuclear Information System (INIS)

    Johnson, J.O.; Santoro, R.T.; Lillie, R.A.; Barnes, J.M.; McNeilly, G.S.

    2000-01-01

    The Department of Energy (DOE) has given the Spallation Neutron Source (SNS) project approval to begin Title I design of the proposed facility to be built at Oak Ridge National Laboratory (ORNL). During the conceptual design phase of the SNS project, the target station bulk-biological shield was characterized and the activation of the major targets station components was calculated. Shielding requirements were assessed with respect to weight, space, and dose-rate constraints for operating, shut-down, and accident conditions utilizing the SNS shield design criteria, DOE Order 5480.25, and requirements specified in 10 CFR 835. Since completion of the conceptual design phase, there have been major design changes to the target station as a result of the initial shielding and activation analyses, modifications brought about due to engineering concerns, and feedback from numerous external review committees. These design changes have impacted the results of the conceptual design analyses, and consequently, have required a re-investigation of the new design. Furthermore, the conceptual design shielding analysis did not address many of the details associated with the engineering design of the target station. In this paper, some of the proposed SNS target station preliminary Title I shielding design analyses will be presented. The SNS facility (with emphasis on the target station), shielding design requirements, calculational strategy, and source terms used in the analyses will be described. Preliminary results and conclusions, along with recommendations for additional analyses, will also be presented. (author)

  20. Using Inequality Measures to Incorporate Environmental Justice into Regulatory Analyses

    Science.gov (United States)

    Harper, Sam; Ruder, Eric; Roman, Henry A.; Geggel, Amelia; Nweke, Onyemaechi; Payne-Sturges, Devon; Levy, Jonathan I.

    2013-01-01

    Formally evaluating how specific policy measures influence environmental justice is challenging, especially in the context of regulatory analyses in which quantitative comparisons are the norm. However, there is a large literature on developing and applying quantitative measures of health inequality in other settings, and these measures may be applicable to environmental regulatory analyses. In this paper, we provide information to assist policy decision makers in determining the viability of using measures of health inequality in the context of environmental regulatory analyses. We conclude that quantification of the distribution of inequalities in health outcomes across social groups of concern, considering both within-group and between-group comparisons, would be consistent with both the structure of regulatory analysis and the core definition of environmental justice. Appropriate application of inequality indicators requires thorough characterization of the baseline distribution of exposures and risks, leveraging data generally available within regulatory analyses. Multiple inequality indicators may be applicable to regulatory analyses, and the choice among indicators should be based on explicit value judgments regarding the dimensions of environmental justice of greatest interest. PMID:23999551

  1. Methodological Quality Assessment of Meta-analyses in Endodontics.

    Science.gov (United States)

    Kattan, Sereen; Lee, Su-Min; Kohli, Meetu R; Setzer, Frank C; Karabucak, Bekir

    2018-01-01

    The objectives of this review were to assess the methodological quality of published meta-analyses related to endodontics using the assessment of multiple systematic reviews (AMSTAR) tool and to provide a follow-up to previously published reviews. Three electronic databases were searched for eligible studies according to the inclusion and exclusion criteria: Embase via Ovid, The Cochrane Library, and Scopus. The electronic search was amended by a hand search of 6 dental journals (International Endodontic Journal; Journal of Endodontics; Australian Endodontic Journal; Oral Surgery, Oral Medicine, Oral Pathology, Oral Radiology; Endodontics and Dental Traumatology; and Journal of Dental Research). The searches were conducted to include articles published after July 2009, and the deadline for inclusion of the meta-analyses was November 30, 2016. The AMSTAR assessment tool was used to evaluate the methodological quality of all included studies. A total of 36 reports of meta-analyses were included. The overall quality of the meta-analyses reports was found to be medium, with an estimated mean overall AMSTAR score of 7.25 (95% confidence interval, 6.59-7.90). The most poorly assessed areas were providing an a priori design, the assessment of the status of publication, and publication bias. In recent publications in the field of endodontics, the overall quality of the reported meta-analyses is medium according to AMSTAR. Copyright © 2017 American Association of Endodontists. Published by Elsevier Inc. All rights reserved.

  2. Seismic risk analyses in the German Risk Study, phase B

    International Nuclear Information System (INIS)

    Hosser, D.; Liemersdorf, H.

    1991-01-01

    The paper discusses some aspects of the seismic risk part of the German Risk Study for Nuclear Power Plants, Phase B. First simplified analyses in Phase A of the study allowed only a rough classification of structures and systems of the PWR reference plant according to their seismic risk contribution. These studies were extended in Phase B using improved models for the dynamic analyses of buildings, structures and components as well as for the probabilistic analyses of seismic loading, failure probabilities and event trees. The methodology of deriving probabilistic seismic load descriptions is explained and compared with the methods in Phase A of the study and in other studies. Some details of the linear and nonlinear dynamic analyses of structures are reported in order to demonstrate the influence of different assumptions for material behaviour and failure criteria. The probabilistic structural and event tree analyses are discussed with respect to distribution assumptions, acceptable simplifications and model uncertainties. Some results for the PWR reference plant are given. (orig.)

  3. VESPA: Very large-scale Evolutionary and Selective Pressure Analyses

    Directory of Open Access Journals (Sweden)

    Andrew E. Webb

    2017-06-01

    Full Text Available Background Large-scale molecular evolutionary analyses of protein coding sequences requires a number of preparatory inter-related steps from finding gene families, to generating alignments and phylogenetic trees and assessing selective pressure variation. Each phase of these analyses can represent significant challenges, particularly when working with entire proteomes (all protein coding sequences in a genome from a large number of species. Methods We present VESPA, software capable of automating a selective pressure analysis using codeML in addition to the preparatory analyses and summary statistics. VESPA is written in python and Perl and is designed to run within a UNIX environment. Results We have benchmarked VESPA and our results show that the method is consistent, performs well on both large scale and smaller scale datasets, and produces results in line with previously published datasets. Discussion Large-scale gene family identification, sequence alignment, and phylogeny reconstruction are all important aspects of large-scale molecular evolutionary analyses. VESPA provides flexible software for simplifying these processes along with downstream selective pressure variation analyses. The software automatically interprets results from codeML and produces simplified summary files to assist the user in better understanding the results. VESPA may be found at the following website: http://www.mol-evol.org/VESPA.

  4. [Methods, challenges and opportunities for big data analyses of microbiome].

    Science.gov (United States)

    Sheng, Hua-Fang; Zhou, Hong-Wei

    2015-07-01

    Microbiome is a novel research field related with a variety of chronic inflamatory diseases. Technically, there are two major approaches to analysis of microbiome: metataxonome by sequencing the 16S rRNA variable tags, and metagenome by shot-gun sequencing of the total microbial (mainly bacterial) genome mixture. The 16S rRNA sequencing analyses pipeline includes sequence quality control, diversity analyses, taxonomy and statistics; metagenome analyses further includes gene annotation and functional analyses. With the development of the sequencing techniques, the cost of sequencing will decrease, and big data analyses will become the central task. Data standardization, accumulation, modeling and disease prediction are crucial for future exploit of these data. Meanwhile, the information property in these data, and the functional verification with culture-dependent and culture-independent experiments remain the focus in future research. Studies of human microbiome will bring a better understanding of the relations between the human body and the microbiome, especially in the context of disease diagnosis and therapy, which promise rich research opportunities.

  5. Performance and Vibration Analyses of Lift-Offset Helicopters

    Directory of Open Access Journals (Sweden)

    Jeong-In Go

    2017-01-01

    Full Text Available A validation study on the performance and vibration analyses of the XH-59A compound helicopter is conducted to establish techniques for the comprehensive analysis of lift-offset compound helicopters. This study considers the XH-59A lift-offset compound helicopter using a rigid coaxial rotor system as a verification model. CAMRAD II (Comprehensive Analytical Method of Rotorcraft Aerodynamics and Dynamics II, a comprehensive analysis code, is used as a tool for the performance, vibration, and loads analyses. A general free wake model, which is a more sophisticated wake model than other wake models, is used to obtain good results for the comprehensive analysis. Performance analyses of the XH-59A helicopter with and without auxiliary propulsion are conducted in various flight conditions. In addition, vibration analyses of the XH-59A compound helicopter configuration are conducted in the forward flight condition. The present comprehensive analysis results are in good agreement with the flight test and previous analyses. Therefore, techniques for the comprehensive analysis of lift-offset compound helicopters are appropriately established. Furthermore, the rotor lifts are calculated for the XH-59A lift-offset compound helicopter in the forward flight condition to investigate the airloads characteristics of the ABC™ (Advancing Blade Concept rotor.

  6. Utilization of Large Scale Surface Models for Detailed Visibility Analyses

    Science.gov (United States)

    Caha, J.; Kačmařík, M.

    2017-11-01

    This article demonstrates utilization of large scale surface models with small spatial resolution and high accuracy, acquired from Unmanned Aerial Vehicle scanning, for visibility analyses. The importance of large scale data for visibility analyses on the local scale, where the detail of the surface model is the most defining factor, is described. The focus is not only the classic Boolean visibility, that is usually determined within GIS, but also on so called extended viewsheds that aims to provide more information about visibility. The case study with examples of visibility analyses was performed on river Opava, near the Ostrava city (Czech Republic). The multiple Boolean viewshed analysis and global horizon viewshed were calculated to determine most prominent features and visibility barriers of the surface. Besides that, the extended viewshed showing angle difference above the local horizon, which describes angular height of the target area above the barrier, is shown. The case study proved that large scale models are appropriate data source for visibility analyses on local level. The discussion summarizes possible future applications and further development directions of visibility analyses.

  7. HLA region excluded by linkage analyses of early onset periodontitis

    Energy Technology Data Exchange (ETDEWEB)

    Sun, C.; Wang, S.; Lopez, N.

    1994-09-01

    Previous studies suggested that HLA genes may influence susceptibility to early-onset periodontitis (EOP). Segregation analyses indicate that EOP may be due to a single major gene. We conducted linkage analyses to assess possible HLA effects on EOP. Fifty families with two or more close relatives affected by EOP were ascertained in Virginia and Chile. A microsatellite polymorphism within the HLA region (at the tumor necrosis factor beta locus) was typed using PCR. Linkage analyses used a donimant model most strongly supported by previous studies. Assuming locus homogeneity, our results exclude a susceptibility gene within 10 cM on either side of our marker locus. This encompasses all of the HLA region. Analyses assuming alternative models gave qualitatively similar results. Allowing for locus heterogeneity, our data still provide no support for HLA-region involvement. However, our data do not statistically exclude (LOD <-2.0) hypotheses of disease-locus heterogeneity, including models where up to half of our families could contain an EOP disease gene located in the HLA region. This is due to the limited power of even our relatively large collection of families and the inherent difficulties of mapping genes for disorders that have complex and heterogeneous etiologies. Additional statistical analyses, recruitment of families, and typing of flanking DNA markers are planned to more conclusively address these issues with respect to the HLA region and other candidate locations in the human genome. Additional results for markers covering most of the human genome will also be presented.

  8. Microcomputer-controlled thermoluminescent analyser IJS MR-200

    International Nuclear Information System (INIS)

    Mihelic, M.; Miklavzic, U.; Rupnik, Z.; Satalic, P.; Spreizer, F.; Zerovnik, I.

    1985-01-01

    Performances and concept of the multipurpose, microcomputer-controlled thermoluminescent analyser, designed for use in laboratory work TL dosemeters as well as for routine dose readings in the range from ecological to accident doses is described. The main features of the analyser are: time-linear sampling, digitalisation, storing, and subsequent displaying on the monitor time scale of the glow and and temperature curve of the TL material; digital stabilization, control and diagnostic of the analog unit; ability of storing 7 different 8-parametric heating programs; ability of storing 15 evaluation programs defined by 2 or 4 parameters and 3 different algorithms (altogether 5 types of evaluations). Analyser has several features intended for routine work: 9 function keys and possibilities of file forming on cassette or display disc, of dose calculation and averaging, of printing reports with names, and possibility of additional programming in Basic. (author)

  9. A computer program for multiple decrement life table analyses.

    Science.gov (United States)

    Poole, W K; Cooley, P C

    1977-06-01

    Life table analysis has traditionally been the tool of choice in analyzing distribution of "survival" times when a parametric form for the survival curve could not be reasonably assumed. Chiang, in two papers [1,2] formalized the theory of life table analyses in a Markov chain framework and derived maximum likelihood estimates of the relevant parameters for the analyses. He also discussed how the techniques could be generalized to consider competing risks and follow-up studies. Although various computer programs exist for doing different types of life table analysis [3] to date, there has not been a generally available, well documented computer program to carry out multiple decrement analyses, either by Chiang's or any other method. This paper describes such a program developed by Research Triangle Institute. A user's manual is available at printing costs which supplements the contents of this paper with a discussion of the formula used in the program listing.

  10. Conducting qualitative research in mental health: Thematic and content analyses.

    Science.gov (United States)

    Crowe, Marie; Inder, Maree; Porter, Richard

    2015-07-01

    The objective of this paper is to describe two methods of qualitative analysis - thematic analysis and content analysis - and to examine their use in a mental health context. A description of the processes of thematic analysis and content analysis is provided. These processes are then illustrated by conducting two analyses of the same qualitative data. Transcripts of qualitative interviews are analysed using each method to illustrate these processes. The illustration of the processes highlights the different outcomes from the same set of data. Thematic and content analyses are qualitative methods that serve different research purposes. Thematic analysis provides an interpretation of participants' meanings, while content analysis is a direct representation of participants' responses. These methods provide two ways of understanding meanings and experiences and provide important knowledge in a mental health context. © The Royal Australian and New Zealand College of Psychiatrists 2015.

  11. Fourier Transform Mass Spectrometry: The Transformation of Modern Environmental Analyses

    Science.gov (United States)

    Lim, Lucy; Yan, Fangzhi; Bach, Stephen; Pihakari, Katianna; Klein, David

    2016-01-01

    Unknown compounds in environmental samples are difficult to identify using standard mass spectrometric methods. Fourier transform mass spectrometry (FTMS) has revolutionized how environmental analyses are performed. With its unsurpassed mass accuracy, high resolution and sensitivity, researchers now have a tool for difficult and complex environmental analyses. Two features of FTMS are responsible for changing the face of how complex analyses are accomplished. First is the ability to quickly and with high mass accuracy determine the presence of unknown chemical residues in samples. For years, the field has been limited by mass spectrometric methods that were based on knowing what compounds of interest were. Secondly, by utilizing the high resolution capabilities coupled with the low detection limits of FTMS, analysts also could dilute the sample sufficiently to minimize the ionization changes from varied matrices. PMID:26784175

  12. PWR plant transient analyses using TRAC-PF1

    International Nuclear Information System (INIS)

    Ireland, J.R.; Boyack, B.E.

    1984-01-01

    This paper describes some of the pressurized water reactor (PWR) transient analyses performed at Los Alamos for the US Nuclear Regulatory Commission using the Transient Reactor Analysis Code (TRAC-PF1). Many of the transient analyses performed directly address current PWR safety issues. Included in this paper are examples of two safety issues addressed by TRAC-PF1. These examples are pressurized thermal shock (PTS) and feed-and-bleed cooling for Oconee-1. The calculations performed were plant specific in that details of both the primary and secondary sides were modeled in addition to models of the plant integrated control systems. The results of these analyses show that for these two transients, the reactor cores remained covered and cooled at all times posing no real threat to the reactor system nor to the public

  13. Finite element analyses of a linear-accelerator electron gun

    Science.gov (United States)

    Iqbal, M.; Wasy, A.; Islam, G. U.; Zhou, Z.

    2014-02-01

    Thermo-structural analyses of the Beijing Electron-Positron Collider (BEPCII) linear-accelerator, electron gun, were performed for the gun operating with the cathode at 1000 °C. The gun was modeled in computer aided three-dimensional interactive application for finite element analyses through ANSYS workbench. This was followed by simulations using the SLAC electron beam trajectory program EGUN for beam optics analyses. The simulations were compared with experimental results of the assembly to verify its beam parameters under the same boundary conditions. Simulation and test results were found to be in good agreement and hence confirmed the design parameters under the defined operating temperature. The gun is operating continuously since commissioning without any thermal induced failures for the BEPCII linear accelerator.

  14. Finite element analyses of a linear-accelerator electron gun

    Energy Technology Data Exchange (ETDEWEB)

    Iqbal, M., E-mail: muniqbal.chep@pu.edu.pk, E-mail: muniqbal@ihep.ac.cn [Centre for High Energy Physics, University of the Punjab, Lahore 45590 (Pakistan); Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China); Wasy, A. [Department of Mechanical Engineering, Changwon National University, Changwon 641773 (Korea, Republic of); Islam, G. U. [Centre for High Energy Physics, University of the Punjab, Lahore 45590 (Pakistan); Zhou, Z. [Institute of High Energy Physics, Chinese Academy of Sciences, Beijing 100049 (China)

    2014-02-15

    Thermo-structural analyses of the Beijing Electron-Positron Collider (BEPCII) linear-accelerator, electron gun, were performed for the gun operating with the cathode at 1000 °C. The gun was modeled in computer aided three-dimensional interactive application for finite element analyses through ANSYS workbench. This was followed by simulations using the SLAC electron beam trajectory program EGUN for beam optics analyses. The simulations were compared with experimental results of the assembly to verify its beam parameters under the same boundary conditions. Simulation and test results were found to be in good agreement and hence confirmed the design parameters under the defined operating temperature. The gun is operating continuously since commissioning without any thermal induced failures for the BEPCII linear accelerator.

  15. Finite element analyses of a linear-accelerator electron gun

    International Nuclear Information System (INIS)

    Iqbal, M.; Wasy, A.; Islam, G. U.; Zhou, Z.

    2014-01-01

    Thermo-structural analyses of the Beijing Electron-Positron Collider (BEPCII) linear-accelerator, electron gun, were performed for the gun operating with the cathode at 1000 °C. The gun was modeled in computer aided three-dimensional interactive application for finite element analyses through ANSYS workbench. This was followed by simulations using the SLAC electron beam trajectory program EGUN for beam optics analyses. The simulations were compared with experimental results of the assembly to verify its beam parameters under the same boundary conditions. Simulation and test results were found to be in good agreement and hence confirmed the design parameters under the defined operating temperature. The gun is operating continuously since commissioning without any thermal induced failures for the BEPCII linear accelerator

  16. Towards Reproducible Research Data Analyses in LHC Particle Physics

    CERN Document Server

    Simko, Tibor

    2017-01-01

    The reproducibility of the research data analysis requires having access not only to the original datasets, but also to the computing environment, the analysis software and the workflow used to produce the original results. We present the nascent CERN Analysis Preservation platform with a set of tools developed to support particle physics researchers in preserving the knowledge around analyses so that capturing, sharing, reusing and reinterpreting data becomes easier. The presentation will focus on three pillars: (i) capturing structured knowledge information about data analysis processes; (ii) capturing the computing environment, the software code, the datasets, the configuration and other information assets used in data analyses; (iii) re-instantiating of preserved analyses on a containerised computing cloud for the purposes of re-validation and re-interpretation.

  17. Fourier Transform Mass Spectrometry: The Transformation of Modern Environmental Analyses

    Directory of Open Access Journals (Sweden)

    Lucy Lim

    2016-01-01

    Full Text Available Unknown compounds in environmental samples are difficult to identify using standard mass spectrometric methods. Fourier transform mass spectrometry (FTMS has revolutionized how environmental analyses are performed. With its unsurpassed mass accuracy, high resolution and sensitivity, researchers now have a tool for difficult and complex environmental analyses. Two features of FTMS are responsible for changing the face of how complex analyses are accomplished. First is the ability to quickly and with high mass accuracy determine the presence of unknown chemical residues in samples. For years, the field has been limited by mass spectrometric methods that were based on knowing what compounds of interest were. Secondly, by utilizing the high resolution capabilities coupled with the low detection limits of FTMS, analysts also could dilute the sample sufficiently to minimize the ionization changes from varied matrices.

  18. Scenario evolution: Interaction between event tree construction and numerical analyses

    International Nuclear Information System (INIS)

    Barr, G.E.; Barnard, R.W.; Dockery, H.A.; Dunn, E.; MacIntyre, A.T.

    1990-01-01

    Construction of well-posed scenarios for the range of conditions possible at any proposed repository site is a critical first step to assessing total system performance. Event tree construction is the method that is being used to develop potential failure scenarios for the proposed nuclear waste repository at Yucca Mountain. An event tree begins with an initial event or condition. Subsequent events are listed in a sequence, leading eventually to release of radionuclides to the accessible environment. Ensuring the validity of the scenarios requires iteration between problems constructed using scenarios contained in the event tree sequence, experimental results, and numerical analyses. Details not adequately captured within the tree initially may become more apparent as a result of analyses. To illustrate this process, the authors discuss the iterations used to develop numerical analyses for PACE-90 (Performance Assessment Calculational Exercises) using basaltic igneous activity and human-intrusion event trees

  19. Scenario evolution: Interaction between event tree construction and numerical analyses

    International Nuclear Information System (INIS)

    Barr, G.E.; Barnard, R.W.; Dockery, H.A.; Dunn, E.; MacIntyre, A.T.

    1991-01-01

    Construction of well-posed scenarios for the range of conditions possible at any proposed repository site is a critical first step to assessing total system performance. Even tree construction is the method that is being used to develop potential failure scenarios for the proposed nuclear waste repository at Yucca Mountain. An event tree begins with an initial event or condition. Subsequent events are listed in a sequence, leading eventually to release of radionuclides to the accessible environment. Ensuring the validity of the scenarios requires iteration between problems constructed using scenarios contained in the event tree sequence, experimental results, and numerical analyses. Details not adequately captured within the tree initially may become more apparent as a result of analyses. To illustrate this process, we discuss the iterations used to develop numerical analyses for PACE-90 using basaltic igneous activity and human-intrusion event trees

  20. Socioeconomic issues and analyses for radioactive waste disposal facilities

    International Nuclear Information System (INIS)

    Ulland, L.

    1988-01-01

    Radioactive Waste facility siting and development can raise major social and economic issues in the host area. Initial site screening and analyses have been conducted for both potential high-level and low-level radioactive waste facilities; more detailed characterization and analyses are being planned. Results of these assessments are key to developing community plans that identify and implement measures to mitigate adverse socioeconomic impacts. Preliminary impact analyses conducted at high-level sites in Texas and Nevada, and site screening activities for low-level facilities in Illinois and California have identified a number of common socioeconomic issues and characteristics as well as issues and characteristics that differ between the sites and the type of facilities. Based on these comparisons, implications for selection of an appropriate methodology for impact assessment and elements of impact mitigation are identified

  1. Financial relationships in economic analyses of targeted therapies in oncology.

    Science.gov (United States)

    Valachis, Antonis; Polyzos, Nikolaos P; Nearchou, Andreas; Lind, Pehr; Mauri, Davide

    2012-04-20

    A potential financial relationship between investigators and pharmaceutical manufacturers has been associated with an increased likelihood of reporting favorable conclusions about a sponsor's proprietary agent in pharmacoeconomic studies. The purpose of this study is to investigate whether there is an association between financial relationships and outcome in economic analyses of new targeted therapies in oncology. We searched PubMed (last update June 2011) for economic analyses of targeted therapies (including monoclonal antibodies, tyrosine-kinase inhibitors, and mammalian target of rapamycin inhibitors) in oncology. The trials were qualitatively rated regarding the cost assessment as favorable, neutral, or unfavorable on the basis of prespecified criteria. Overall, 81 eligible studies were identified. Economic analyses that were funded by pharmaceutical companies were more likely to report favorable qualitative cost estimates (28 [82%] of 34 v 21 [45%] of 47; P = .003). The presence of an author affiliated with manufacturer was not associated with study outcome. Furthermore, if only studies including a conflict of interest statement were included (66 of 81), studies that reported any financial relationship with manufacturers (author affiliation and/or funding and/or other financial relationship) were more likely to report favorable results of targeted therapies compared with studies without financial relationship (32 [71%] of 45 v nine [43%] of 21; P = .025). Our study reveals a potential threat for industry-related bias in economic analyses of targeted therapies in oncology in favor of analyses with financial relationships between authors and manufacturers. A more balanced funding of economic analyses from other sources may allow greater confidence in the interpretation of their results.

  2. Publication bias in dermatology systematic reviews and meta-analyses.

    Science.gov (United States)

    Atakpo, Paul; Vassar, Matt

    2016-05-01

    Systematic reviews and meta-analyses in dermatology provide high-level evidence for clinicians and policy makers that influence clinical decision making and treatment guidelines. One methodological problem with systematic reviews is the under representation of unpublished studies. This problem is due in part to publication bias. Omission of statistically non-significant data from meta-analyses may result in overestimation of treatment effect sizes which may lead to clinical consequences. Our goal was to assess whether systematic reviewers in dermatology evaluate and report publication bias. Further, we wanted to conduct our own evaluation of publication bias on meta-analyses that failed to do so. Our study considered systematic reviews and meta-analyses from ten dermatology journals from 2006 to 2016. A PubMed search was conducted, and all full-text articles that met our inclusion criteria were retrieved and coded by the primary author. 293 articles were included in our analysis. Additionally, we formally evaluated publication bias in meta-analyses that failed to do so using trim and fill and cumulative meta-analysis by precision methods. Publication bias was mentioned in 107 articles (36.5%) and was formally evaluated in 64 articles (21.8%). Visual inspection of a funnel plot was the most common method of evaluating publication bias. Publication bias was present in 45 articles (15.3%), not present in 57 articles (19.5%) and not determined in 191 articles (65.2%). Using the trim and fill method, 7 meta-analyses (33.33%) showed evidence of publication bias. Although the trim and fill method only found evidence of publication bias in 7 meta-analyses, the cumulative meta-analysis by precision method found evidence of publication bias in 15 meta-analyses (71.4%). Many of the reviews in our study did not mention or evaluate publication bias. Further, of the 42 articles that stated following PRISMA reporting guidelines, 19 (45.2%) evaluated for publication bias. In

  3. Experimental technique of stress analyses by neutron diffraction

    International Nuclear Information System (INIS)

    Sun, Guangai; Chen, Bo; Huang, Chaoqiang

    2009-09-01

    The structures and main components of neutron diffraction stress analyses spectrometer, SALSA, as well as functions and parameters of each components are presented. The technical characteristic and structure parameters of SALSA are described. Based on these aspects, the choice of gauge volume, method of positioning sample, determination of diffraction plane and measurement of zero stress do are discussed. Combined with the practical experiments, the basic experimental measurement and the related settings are introduced, including the adjustments of components, pattern scattering, data recording and checking etc. The above can be an instruction for stress analyses experiments by neutron diffraction and neutron stress spectrometer construction. (authors)

  4. [The maintenance of automatic analysers and associated documentation].

    Science.gov (United States)

    Adjidé, V; Fournier, P; Vassault, A

    2010-12-01

    The maintenance of automatic analysers and associated documentation taking part in the requirements of the ISO 15189 Standard and the French regulation as well have to be defined in the laboratory policy. The management of the periodic maintenance and documentation shall be implemented and fulfilled. The organisation of corrective maintenance has to be managed to avoid interruption of the task of the laboratory. The different recommendations concern the identification of materials including automatic analysers, the environmental conditions to take into account, the documentation provided by the manufacturer and documents prepared by the laboratory including procedures for maintenance.

  5. Designing and recasting LHC analyses with MadAnalysis 5

    CERN Document Server

    Conte, Eric; Fuks, Benjamin; Wymant, Chris

    2014-01-01

    We present an extension of the expert mode of the MadAnalysis 5 program dedicated to the design or reinterpretation of high-energy physics collider analyses. We detail the predefined classes, functions and methods available to the user and emphasize the most recent developments. The latter include the possible definition of multiple sub-analyses and a novel user-friendly treatment for the selection criteria. We illustrate this approach by two concrete examples: a CMS search for supersymmetric partners of the top quark and a phenomenological analysis targeting hadronically decaying monotop systems.

  6. Nuclear power plants: Results of recent safety analyses

    International Nuclear Information System (INIS)

    Steinmetz, E.

    1987-01-01

    The contributions deal with the problems posed by low radiation doses, with the information currently available from analyses of the Chernobyl reactor accident, and with risk assessments in connection with nuclear power plant accidents. Other points of interest include latest results on fission product release from reactor core or reactor building, advanced atmospheric dispersion models for incident and accident analyses, reliability studies on safety systems, and assessment of fire hazard in nuclear installations. The various contributions are found as separate entries in the database. (DG) [de

  7. Economical analyses of construction of a biomass boiler house

    International Nuclear Information System (INIS)

    Normak, A.

    2002-01-01

    To reduce the energy costs we can use cheaper fuel to fire our boiler. One of the cheapest fuels is wood biomass. It is very actual issue how to use cheaper wood biomass in heat generation to decrease energy costs and to increase biomass share in our energy balance. Before we decide to build biomass boiler house it is recommendable to analyse the economical situation and work out most profitable, efficient, reliable and ecological boiler plant design on particular conditions. The best way to perform the analyses is to use the economical model presented. It saves our time and gives objective evaluation to the project. (author)

  8. Certification of a uranium dioxide reference material for chemical analyses

    International Nuclear Information System (INIS)

    Le Duigou, Y.

    1984-01-01

    This report, issued by the Central Bureau for Nuclear Measurements (CBNM), describes the characterization of a uranium dioxide reference material with accurately determined uranium mass fraction for chemical analyses. The preparation, conditioning, homogeneity tests and the analyses performed on this material are described in Annex 1. The evaluation of the individual impurity results, total of impurities and uranium mass fraction are given in Annex 2. Information on a direct determination of uranium by titration is given in Annex 3. The uranium mass fraction (881.34+-0.13) g.kg -1 calculated in Annex 2 is given on the certificate

  9. Design and manufacture of TL analyser by using the microcomputer

    International Nuclear Information System (INIS)

    Doh, Sih Hong; Woo, Chong Ho

    1986-01-01

    This paper describes the design of the thermoluminescence analyser using microcomputer. TL analyser is designed to perform the three step heat treatment, such as pre-read heating, readout procedure and post-heating (or pre-irradiation ) anneal. We used a 12-bit A/D converter to get the precise measurement and the phase control method to control the heating temperature. Since the used Apple II microcomputer is cheap and popular, it is possible to design the economical system. Experimental results showed the successful operation with flexibility. The error of temperature control was less than ± 0.2% of the expected value. (Author)

  10. VIPRE modeling of VVER-1000 reactor core for DNB analyses

    Energy Technology Data Exchange (ETDEWEB)

    Sung, Y.; Nguyen, Q. [Westinghouse Electric Corporation, Pittsburgh, PA (United States); Cizek, J. [Nuclear Research Institute, Prague, (Czech Republic)

    1995-09-01

    Based on the one-pass modeling approach, the hot channels and the VVER-1000 reactor core can be modeled in 30 channels for DNB analyses using the VIPRE-01/MOD02 (VIPRE) code (VIPRE is owned by Electric Power Research Institute, Palo Alto, California). The VIPRE one-pass model does not compromise any accuracy in the hot channel local fluid conditions. Extensive qualifications include sensitivity studies of radial noding and crossflow parameters and comparisons with the results from THINC and CALOPEA subchannel codes. The qualifications confirm that the VIPRE code with the Westinghouse modeling method provides good computational performance and accuracy for VVER-1000 DNB analyses.

  11. RELAP5 analyses and support of Oconee-1 PTS studies

    International Nuclear Information System (INIS)

    Charlton, T.R.

    1983-01-01

    The integrity of a reactor vessel during a severe overcooling transient with primary system pressurization is a current safety concern and has been identified as an Unresolved Safety Issue(USI) A-49 by the US Nuclear Regulatory Commission (NRC). Resolution of USI A-49, denoted as Pressurized Thermal Shock (PTS), is being examined by the US NRC sponsored PTS integration study. In support of this study, the Idaho National Engineering Laboratory (INEL) has performed RELAP5/MOD1.5 thermal-hydraulic analyses of selected overcooling transients. These transient analyses were performed for the Oconee-1 pressurized water reactor (PWR), which is Babcock and Wilcox designed nuclear steam supply system

  12. Simulation-based Investigations of Electrostatic Beam Energy Analysers

    CERN Document Server

    Pahl, Hannes

    2015-01-01

    An energy analyser is needed to measure the beam energy profile behind the REX-EBIS at ISOLDE. The device should be able to operate with an accuracy of 1 V at voltages up to 30 kV. In order to find a working concept for an electrostatic energy analyser different designs were evaluated with simulations. A spherical device and its design issues are presented. The potential deformation effects of grids at high voltages and their influence on the energy resolution were investigated. First tests were made with a grid-free ring electrode device and show promising results.

  13. Cost-benefit analyses for the development of magma power

    International Nuclear Information System (INIS)

    Haraden, John

    1992-01-01

    Magma power is the potential generation of electricity from shallow magma bodies in the crust of the Earth. Considerable uncertainty still surrounds the development of magma power, but most of that uncertainty may be eliminated by drilling the first deep magma well. The uncertainty presents no serious impediments to the private drilling of the well. For reasons unrelated to the uncertainty, there may be no private drilling and there may be justification for public drilling. In this paper, we present cost-benefit analyses for private and public drilling of the well. Both analyses indicate there is incentive for drilling. (Author)

  14. The development of an on-line gold analyser

    International Nuclear Information System (INIS)

    Robert, R.V.D.; Ormrod, G.T.W.

    1982-01-01

    An on-line analyser to monitor the gold in solutions from the carbon-in-pulp process is described. The automatic system is based on the delivery of filtered samples of the solutions to a distribution valve for measurement by flameless atomic-absorption spectrophotometry. The samples is introduced by the aerosol-deposition method. Operation of the analyser on a pilot plant and on a full-scale carbon-in-pulp plant has shown that the system is economically feasible and capable of providing a continuous indication of the efficiency of the extraction process

  15. Design basis event consequence analyses for the Yucca Mountain project

    International Nuclear Information System (INIS)

    Orvis, D.D.; Haas, M.N.; Martin, J.H.

    1997-01-01

    Design basis event (DBE) definition and analysis is an ongoing and integrated activity among the design and analysis groups of the Yucca Mountain Project (YMP). DBE's are those that potentially lead to breach of the waste package and waste form (e.g., spent fuel rods) with consequent release of radionuclides to the environment. A Preliminary Hazards Analysis (PHA) provided a systematic screening of external and internal events that were candidate DBE's that will be subjected to analyses for radiological consequences. As preparation, pilot consequence analyses for the repository subsurface and surface facilities have been performed to define the methodology, data requirements, and applicable regulatory limits

  16. Detection of defects of Kenaf/Epoxy by Thermography Analyses

    International Nuclear Information System (INIS)

    Suriani, M J; Ali, Aidi; Sapuan, S M; Khalina, A; Abdullah, S

    2012-01-01

    There are quite a few defects can occur due to manufacturing of the composites such as voids, resin-rich zones, pockets of undispersed cross-linker, misaligned fibres and regions where resin has poorly wetted the fibres. Such defect can reduce the mechanical properties as well mechanical performance of the structure and thus must be determine. In this study, the defect of Kenaf/epoxy reinforced composite materials has been determined by thermography analyses and mechanical properties testing of the composites have been done by tensile test. 95% of the thermography analyses have proved that the defects occur in the composite has reduced the mechanical properties of the specimens.

  17. Using Microsoft Office Excel 2007 to conduct generalized matching analyses.

    Science.gov (United States)

    Reed, Derek D

    2009-01-01

    The generalized matching equation is a robust and empirically supported means of analyzing relations between reinforcement and behavior. Unfortunately, no simple task analysis is available to behavior analysts interested in using the matching equation to evaluate data in clinical or applied settings. This technical article presents a task analysis for the use of Microsoft Excel to analyze and plot the generalized matching equation. Using a data-based case example and a step-by-step guide for completing the analysis, these instructions are intended to promote the use of quantitative analyses by researchers with little to no experience in quantitative analyses or the matching law.

  18. USING MICROSOFT OFFICE EXCEL® 2007 TO CONDUCT GENERALIZED MATCHING ANALYSES

    Science.gov (United States)

    Reed, Derek D

    2009-01-01

    The generalized matching equation is a robust and empirically supported means of analyzing relations between reinforcement and behavior. Unfortunately, no simple task analysis is available to behavior analysts interested in using the matching equation to evaluate data in clinical or applied settings. This technical article presents a task analysis for the use of Microsoft Excel to analyze and plot the generalized matching equation. Using a data-based case example and a step-by-step guide for completing the analysis, these instructions are intended to promote the use of quantitative analyses by researchers with little to no experience in quantitative analyses or the matching law. PMID:20514196

  19. Preserving and reusing high-energy-physics data analyses

    CERN Document Server

    Simko, Tibor; Dasler, Robin; Fokianos, Pamfilos; Kuncar, Jiri; Lavasa, Artemis; Mattmann, Annemarie; Rodriguez, Diego; Trzcinska, Anna; Tsanaktsidis, Ioannis

    2017-01-01

    The revalidation, reuse and reinterpretation of data analyses require having access to the original virtual environments, datasets and software that was used to produce the original scientific result. The CERN Analysis Preservation pilot project is developing a set of tools that support particle physics researchers in preserving the knowledge around analyses so that capturing, sharing, reusing and reinterpreting data becomes easier. In this talk, we shall notably focus on the aspects of reusing a preserved analysis. We describe a system that permits to instantiate the preserved analysis workflow on the computing cloud, paving the way to allowing researchers to revalidate and reinterpret research data even many years after the original publication.

  20. Comparative study of bridge plate associated to the intramedullary pin and the dynamic compression plate on the experimental osteotomy fixation of femoral in rabbits (Oryctolagus cuniculus). Clinical, radiographic, histological and scintigraphy analyses; Estudo comparativo da placa em ponte associada ao pino intramedular e da placa de compressao dinamica na fixacao de osteotomia experimental em femur de coelhos (Oryctolagus cuniculus). Analises clinica, radiografica, histologica e cintilografica

    Energy Technology Data Exchange (ETDEWEB)

    Borges, Natalie Ferreira

    2011-07-01

    The objectives were to benchmark and monitor the fracture healing of femoral osteotomy in rabbits after fixation with dynamic compression plate and bridge plate associated with intramedullary pin. Were used 14 New Zealand rabbits, four months old with mean weight of 3.5 pounds, from the Experimental Farm Professor Helio Barbosa of the Veterinary School of Minas Gerais Federal Univ. (UFMG). The animals were randomly divided into two groups (I and II). All rabbits underwent osteotomy across the middle third of right femur. In the group I was made to fix the osteotomy with the bridge plate (BP) associated with intramedullary pin, introduced the technique of minimal invasion. In group II, we used dynamic compression plate (DCP) via the conventional approach. Both groups were evaluated clinical, radiographic, histologic and scintigraphic findings. Clinical assessments were performed weekly until the 12{sup th} postoperative week and radiographic examinations were performed before, immediately after, at 15, 30, 45, 60 and 90 days. The bone scintigraphy were performed before and at 20, 50 and 90 days after surgery to monitor the bone metabolism qualitatively and quantitatively. Observed perfusion and bone healing process. After 90 days of study, there was histopathologic evaluation of the osteotomized area and the insertion of screws. In the region of the osteotomy was observed predominance of trabecular bone in group I and group II, the predominance of bone osteons, compatible with the original bone. On insertion of the screws did not differ between groups and there was cortical discontinuity, little necrosis and local hemorrhage. The two types of fixation have led to consolidation within the scheduled period, maturing in early fixation with DCP fixation compared with BP. Scintigraphy demonstrated by the indices of activity and image characteristics, the process of bone healing was significantly greater in animals undergoing early fixation with DCP. (author)

  1. Race, Gender, and Reseacher Positionality Analysed Through Memory Work

    DEFF Research Database (Denmark)

    Andreassen, Rikke; Myong, Lene

    2017-01-01

    Drawing upon feminist standpoint theory and memory work, the authors analyse racial privilege by investigating their own racialized and gendered subjectifications as academic researchers. By looking at their own experiences within academia, they show how authority and agency are contingent upon...

  2. Effects of GPS sampling intensity on home range analyses

    Science.gov (United States)

    Jeffrey J. Kolodzinski; Lawrence V. Tannenbaum; David A. Osborn; Mark C. Conner; W. Mark Ford; Karl V. Miller

    2010-01-01

    The two most common methods for determining home ranges, minimum convex polygon (MCP) and kernel analyses, can be affected by sampling intensity. Despite prior research, it remains unclear how high-intensity sampling regimes affect home range estimations. We used datasets from 14 GPS-collared, white-tailed deer (Odocoileus virginianus) to describe...

  3. Prenominal and postnominal reduced relative clauses: arguments against unitary analyses

    NARCIS (Netherlands)

    Sleeman, P.

    2007-01-01

    These last years, several analyses have been proposed in which prenominal and postnominal reduced relatives are merged in the same position. Kayne (1994) claims that both types of reduced relative clauses are the complement of the determiner. More recently, Cinque (2005) has proposed that both types

  4. Optical region elemental abundance analyses of B and A stars

    International Nuclear Information System (INIS)

    Adelman, S.J.; Young, J.M.; Baldwin, H.E.

    1984-01-01

    Abundance analyses using optical region data and fully line blanketed model atmospheres have been performed for two sharp-lined hot Am stars o Pegasi and σ Aquarii and for the sharp-lined marginally peculiar A star v Cancri. The derived abundances exhibit definite anomalies compared with those of normal B-type stars and the Sun. (author)

  5. How to take environmental samples for stable isotope analyses

    International Nuclear Information System (INIS)

    Rogers, K.M.

    2009-01-01

    It is possible to analyse a diverse range of samples for environmental investigations. The main types are soil/sediments, vegetation, fauna, shellfish, waste and water. Each type of samples requires different storage and collection methods. Outlined here are the preferred methods of collection to ensure maximum sample integrity and reliability. (author).

  6. How to take environmental samples for stable isotope analyses

    International Nuclear Information System (INIS)

    Rogers, K.M.

    2013-01-01

    It is possible to analyse a diverse range of samples for environmental investigations. The main types are soil/sediments, vegetation, fauna, shellfish, waste and water. Each type of samples requires different storage and collection methods. Outlined here are the preferred methods of collection to ensure maximum sample integrity and reliability. (author).

  7. How to take environmental samples for stable isotope analyses

    International Nuclear Information System (INIS)

    Rogers, K.M.

    2012-01-01

    It is possible to analyse a diverse range of samples for environmental investigations. The main types are soil/sediments, vegetation, fauna, shellfish, waste and water. Each type of samples requires different storage and collection methods. Outlined here are the preferred methods of collection to ensure maximum sample integrity and reliability. (author).

  8. How to take environmental samples for stable isotope analyses

    International Nuclear Information System (INIS)

    Rogers, K.M.

    2009-01-01

    It is possible to analyse a diverse range of samples for environmental investigations. The main types are soil/sediments, vegetation, fauna, shellfish, waste and water. Each type of samples requires different storage and collection methods. Outlined here are the preferred methods of collection to ensure maximum sample integrity and reliability. (author)

  9. Laser Beam Caustic Measurement with Focal Spot Analyser

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove; Gong, Hui; Bagger, Claus

    2005-01-01

    In industrial applications of high power CO2-lasers the caustic characteristics of the laser beam have great effects on the performance of the lasers. A welldefined high intense focused spot is essential for reliable production results. This paper presents a focal spot analyser that is developed...

  10. A bromine-based dichroic X-ray polarization analyser

    CERN Document Server

    Collins, S P; Brown, S D; Thompson, P

    2001-01-01

    We have demonstrated the advantages offered by dichroic X-ray polarization filters for linear polarization analysis, and describe such a device, based on a dibromoalkane/urea inclusion compound. The polarizer has been successfully tested by analysing the polarization of magnetic diffraction from holmium.

  11. Multitrait-Multimethod Analyses of Two Self-Concept Instruments.

    Science.gov (United States)

    Marsh, Herbert W.; Smith, Ian D.

    1982-01-01

    The multidimensionality of self-concept and the use of factor analysis in the development of self-concept instruments are supported in multitrait-multimethod analyses of the Sears and Coopersmith instruments. Convergent validity and discriminate validity of subscales in factor analysis and multitrait-multimethod analysis of longitudinal data are…

  12. Persuading Collaboration: Analysing Persuasion in Online Collaboration Projects

    DEFF Research Database (Denmark)

    McHugh, Ronan; Larsen, Birger

    2010-01-01

    In this paper we propose that online collaborative production sites can be fruitfully analysed in terms of the general theoretical framework of Persuasive Design. OpenStreetMap and The Pirate Bay are used as examples of collaborative production sites. Results of a quantitative analysis of persuas...

  13. Global post-Kyoto scenario analyses at PSI

    Energy Technology Data Exchange (ETDEWEB)

    Kypreos, S [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1999-08-01

    Scenario analyses are described here using the Global MARKAL-Macro Trade (GMMT) model to study the economic implications of the Kyoto Protocol to the UN Convention on Climate change. Some conclusions are derived in terms of efficient implementations of the post-Kyoto extensions of the Protocol. (author) 2 figs., 5 refs.

  14. Fundamental issues in finite element analyses of localization of deformation

    NARCIS (Netherlands)

    Borst, de R.; Sluys, L.J.; Mühlhaus, H.-B.; Pamin, J.

    1993-01-01

    Classical continuum models, i.e. continuum models that do not incorporate an internal length scale, suffer from excessive mesh dependence when strain-softening models are used in numerical analyses and cannot reproduce the size effect commonly observed in quasi-brittle failure. In this contribution

  15. Installation and performance evaluation of an indigenous surface area analyser

    International Nuclear Information System (INIS)

    Pillai, S.N.; Solapurkar, M.N.; Venkatesan, V.; Prakash, A.; Khan, K.B.; Kumar, Arun; Prasad, R.S.

    2014-01-01

    An indigenously available surface area analyser was installed inside glove box and checked for its performance by analyzing uranium oxide and thorium oxide powders at RMD. The unit has been made ready for analysis of Plutonium oxide powders after incorporating several important features. (author)

  16. Analysing the performance of dynamic multi-objective optimisation algorithms

    CSIR Research Space (South Africa)

    Helbig, M

    2013-06-01

    Full Text Available and the goal of the algorithm is to track a set of tradeoff solutions over time. Analysing the performance of a dynamic multi-objective optimisation algorithm (DMOA) is not a trivial task. For each environment (before a change occurs) the DMOA has to find a set...

  17. Application of digital image correlation method for analysing crack ...

    Indian Academy of Sciences (India)

    centrated strain by imitating the treatment of micro-cracks using the finite element ... water and moisture to penetrate the concrete leading to serious rust of the ... The correlations among various grey values of digital images are analysed for ...

  18. A Calculus for Modelling, Simulating and Analysing Compartmentalized Biological Systems

    DEFF Research Database (Denmark)

    Mardare, Radu Iulian; Ihekwaba, Adoha

    2007-01-01

    A. Ihekwaba, R. Mardare. A Calculus for Modelling, Simulating and Analysing Compartmentalized Biological Systems. Case study: NFkB system. In Proc. of International Conference of Computational Methods in Sciences and Engineering (ICCMSE), American Institute of Physics, AIP Proceedings, N 2...

  19. Nuclear Analyses of Indian LLCB Test Blanket System in ITER

    Science.gov (United States)

    Swami, H. L.; Shaw, A. K.; Danani, C.; Chaudhuri, Paritosh

    2017-04-01

    Heading towards the Nuclear Fusion Reactor Program, India is developing Lead Lithium Ceramic Breeder (LLCB) tritium breeding blanket for its future fusion Reactor. A mock-up of the LLCB blanket is proposed to be tested in ITER equatorial port no.2, to ensure the overall performance of blanket in reactor relevant nuclear fusion environment. Nuclear analyses play an important role in LLCB Test Blanket System design & development. It is required for tritium breeding estimation, thermal-hydraulic design, coolants process design, radioactive waste management, equipment maintenance & replacement strategies and nuclear safety. The nuclear behaviour of LLCB test blanket module in ITER is predicated in terms of nuclear responses such as tritium production, nuclear heating, neutron fluxes and radiation damages. Radiation shielding capability of LLCB TBS inside and outside bio-shield was also assessed to fulfill ITER shielding requirements. In order to supports the rad-waste and safety assessment, nuclear activation analyses were carried out and radioactivity data were generated for LLCB TBS components. Nuclear analyses of LLCB TBS are performed using ITER recommended nuclear analyses codes (i.e. MCNP, EASY), nuclear cross section data libraries (i.e. FENDL 2.1, EAF) and neutronic model (ITER C-lite v.l). The paper describes a comprehensive nuclear performance of LLCB TBS in ITER.

  20. A review of bioinformatic methods for forensic DNA analyses.

    Science.gov (United States)

    Liu, Yao-Yuan; Harbison, SallyAnn

    2018-03-01

    Short tandem repeats, single nucleotide polymorphisms, and whole mitochondrial analyses are three classes of markers which will play an important role in the future of forensic DNA typing. The arrival of massively parallel sequencing platforms in forensic science reveals new information such as insights into the complexity and variability of the markers that were previously unseen, along with amounts of data too immense for analyses by manual means. Along with the sequencing chemistries employed, bioinformatic methods are required to process and interpret this new and extensive data. As more is learnt about the use of these new technologies for forensic applications, development and standardization of efficient, favourable tools for each stage of data processing is being carried out, and faster, more accurate methods that improve on the original approaches have been developed. As forensic laboratories search for the optimal pipeline of tools, sequencer manufacturers have incorporated pipelines into sequencer software to make analyses convenient. This review explores the current state of bioinformatic methods and tools used for the analyses of forensic markers sequenced on the massively parallel sequencing (MPS) platforms currently most widely used. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. Morphometric analyses of the river basins in Goa

    Digital Repository Service at National Institute of Oceanography (India)

    Iyer, S.D.; Wagle, B.G.

    Morphometric analyses of seven river basins in Goa, India have been carried out. The linear and areal aspects of these basins are reported here. The plots of stream order versus stream numbers and stream orders versus mean stream lengths are found...

  2. Medical Isotope Production Analyses In KIPT Neutron Source Facility

    International Nuclear Information System (INIS)

    Talamo, Alberto; Gohar, Yousry

    2016-01-01

    Medical isotope production analyses in Kharkov Institute of Physics and Technology (KIPT) neutron source facility were performed to include the details of the irradiation cassette and the self-shielding effect. An updated detailed model of the facility was used for the analyses. The facility consists of an accelerator-driven system (ADS), which has a subcritical assembly using low-enriched uranium fuel elements with a beryllium-graphite reflector. The beryllium assemblies of the reflector have the same outer geometry as the fuel elements, which permits loading the subcritical assembly with different number of fuel elements without impacting the reflector performance. The subcritical assembly is driven by an external neutron source generated from the interaction of 100-kW electron beam with a tungsten target. The facility construction was completed at the end of 2015, and it is planned to start the operation during the year of 2016. It is the first ADS in the world, which has a coolant system for removing the generated fission power. Argonne National Laboratory has developed the design concept and performed extensive design analyses for the facility including its utilization for the production of different radioactive medical isotopes. 99 Mo is the parent isotope of 99m Tc, which is the most commonly used medical radioactive isotope. Detailed analyses were performed to define the optimal sample irradiation location and the generated activity, for several radioactive medical isotopes, as a function of the irradiation time.

  3. Radiocarbon analyses along the EDML ice core in Antarctica

    NARCIS (Netherlands)

    van de Wal, R.S.W.; Meijer, H.A.J.; van Rooij, M.; van der Veen, C.

    2007-01-01

    Samples, 17 in total, from the EDML core drilled at Kohnen station Antarctica are analysed for 14CO and 14CO2 with a dry-extraction technique in combination with accelerator mass spectrometry. Results of the in situ produced 14CO fraction show a very low concentration of in situ produced 14CO.

  4. Radiocarbon analyses along the EDML ice core in Antarctica

    NARCIS (Netherlands)

    Van de Wal, R. S. W.; Meijer, H. A. J.; De Rooij, M.; Van der Veen, C.

    Samples, 17 in total, from the EDML core drilled at Kohnen station Antarctica are analysed for (CO)-C-14 and (CO2)-C-14 with a dry-extraction technique in combination with accelerator mass spectrometry. Results of the in situ produced (CO)-C-14 fraction show a very low concentration of in situ

  5. Weight analyses and nitrogen balance assay in rats fed extruded ...

    African Journals Online (AJOL)

    Weight analyses and nitrogen balance assay in adult rats in raw and extruded African breadfruit (Treculia africana) based diets were carried out using response surface methodology in a central composite design. Process variables were feed composition (40 - 100 % African breadfruit, 0 - 5 % corn and 0 - 55 % soybean, ...

  6. Medical Isotope Production Analyses In KIPT Neutron Source Facility

    Energy Technology Data Exchange (ETDEWEB)

    Talamo, Alberto [Argonne National Lab. (ANL), Argonne, IL (United States); Gohar, Yousry [Argonne National Lab. (ANL), Argonne, IL (United States)

    2016-01-01

    Medical isotope production analyses in Kharkov Institute of Physics and Technology (KIPT) neutron source facility were performed to include the details of the irradiation cassette and the self-shielding effect. An updated detailed model of the facility was used for the analyses. The facility consists of an accelerator-driven system (ADS), which has a subcritical assembly using low-enriched uranium fuel elements with a beryllium-graphite reflector. The beryllium assemblies of the reflector have the same outer geometry as the fuel elements, which permits loading the subcritical assembly with different number of fuel elements without impacting the reflector performance. The subcritical assembly is driven by an external neutron source generated from the interaction of 100-kW electron beam with a tungsten target. The facility construction was completed at the end of 2015, and it is planned to start the operation during the year of 2016. It is the first ADS in the world, which has a coolant system for removing the generated fission power. Argonne National Laboratory has developed the design concept and performed extensive design analyses for the facility including its utilization for the production of different radioactive medical isotopes. 99Mo is the parent isotope of 99mTc, which is the most commonly used medical radioactive isotope. Detailed analyses were performed to define the optimal sample irradiation location and the generated activity, for several radioactive medical isotopes, as a function of the irradiation time.

  7. Karyotype analyses of the species of the genus Jurinea Cass ...

    African Journals Online (AJOL)

    In this study, karyotype analyses of 13 species belonging to the genus Jurinea Cass. (Compositae) and grown naturally in Turkey were conducted. These taxa include Jurinea alpigena C. Koch, Jurinea ancyrensis Bornm., Jurinea aucherana DC., Jurinea cadmea Boiss., Jurinea cataonica Boiss. and Hausskn., Jurinea ...

  8. Consumer Brand Choice: Individual and Group Analyses of Demand Elasticity

    Science.gov (United States)

    Oliveira-Castro, Jorge M.; Foxall, Gordon R.; Schrezenmaier, Teresa C.

    2006-01-01

    Following the behavior-analytic tradition of analyzing individual behavior, the present research investigated demand elasticity of individual consumers purchasing supermarket products, and compared individual and group analyses of elasticity. Panel data from 80 UK consumers purchasing 9 product categories (i.e., baked beans, biscuits, breakfast…

  9. Global post-Kyoto scenario analyses at PSI

    International Nuclear Information System (INIS)

    Kypreos, S.

    1999-01-01

    Scenario analyses are described here using the Global MARKAL-Macro Trade (GMMT) model to study the economic implications of the Kyoto Protocol to the UN Convention on Climate change. Some conclusions are derived in terms of efficient implementations of the post-Kyoto extensions of the Protocol. (author) 2 figs., 5 refs

  10. Techniques for Scaling Up Analyses Based on Pre-interpretations

    DEFF Research Database (Denmark)

    Gallagher, John Patrick; Henriksen, Kim Steen; Banda, Gourinath

    2005-01-01

    a variety of analyses, both generic (such as mode analysis) and program-specific (with respect to a type describing some particular property of interest). Previous work demonstrated the approach using pre-interpretations over small domains. In this paper we present techniques that allow the method...

  11. Review of HEDL fuel pin transient analyses analytical programs

    International Nuclear Information System (INIS)

    Scott, J.H.; Baars, R.E.

    1975-05-01

    Methods for analysis of transient fuel pin performance are described, as represented by the steady-state SIEX code and the PECT series of codes used for steady-state and transient mechanical analyses. The empirical fuel failure correlation currently in use for analysis of transient overpower accidents is described. (U.S.)

  12. Geospatial analyses in support of heavy metal contamination ...

    African Journals Online (AJOL)

    This paper presents an exploratory assessment of heavy metal contamination along the main highways in Mafikeng, and illustrates how spatial analyses of the contamination for environmental management purposes can be supported by GIS and Remote Sensing. Roadside soil and grass (Stenotaphrum sp.) samples were ...

  13. Physico-Chemical and Bacteriological Analyses of Water Used for ...

    African Journals Online (AJOL)

    Samuel Olaleye

    Physicochemical and bacteriological analyses were carried out on well water, stream water and river water used for drinking and swimming purposes in. Abeokuta, Nigeria. The results obtained were compared with WHO and EPA standards for drinking and recreational water. With the exception of Sokori stream and a well ...

  14. CPN Tools for Editing, Simulating, and Analysing Coloured Petri Nets

    DEFF Research Database (Denmark)

    Ratzer, Anne Vinter; Wells, Lisa Marie; Lassen, Henry Michael

    2003-01-01

    elements. The tool features incremental syntax checking and code generation which take place while a net is being constructed. A fast simulator efficiently handles both untimed and timed nets. Full and partial state spaces can be generated and analysed, and a standard state space report contains...

  15. Application of digital-image-correlation techniques in analysing ...

    Indian Academy of Sciences (India)

    Basis theory of strain analysis using the digital image correlation method .... Type 304N Stainless Steel (Modulus of Elasticity = 193 MPa, Tensile Yield .... also proves the accuracy of the qualitative analyses by using the DIC ... We thank the National Science Council of Taiwan for supporting this research through grant. No.

  16. Preparation of Kepler light curves for asteroseismic analyses

    NARCIS (Netherlands)

    García, R.A.; Hekker, S.; Stello, D.; Gutiérrez-Soto, J.; Handberg, R.; Huber, D.; Karoff, C.; Uytterhoeven, K.; Appourchaux, T.; Chaplin, W.J.; Elsworth, Y.; Mathur, S.; Ballot, J.; Christensen-Dalsgaard, J.; Gilliland, R.L.; Houdek, G.; Jenkins, J.M.; Kjeldsen, H.; McCauliff, S.; Metcalfe, T.; Middour, C.K.; Molenda-Zakowicz, J.; Monteiro, M.J.P.F.G.; Smith, J.C.; Thompson, M.J.

    2011-01-01

    The Kepler mission is providing photometric data of exquisite quality for the asteroseismic study of different classes of pulsating stars. These analyses place particular demands on the pre-processing of the data, over a range of time-scales from minutes to months. Here, we describe processing

  17. Environmental analyses of land transportation systems in The Netherlands

    NARCIS (Netherlands)

    Bouwman, Mirjan E.; Moll, Henri C.

    Environmental analyses of the impact of transportation systems on the environment from the cradle to the grave are rare. This article makes a comparison of various Dutch passenger transportation systems by studying their complete life-cycle energy use. Moreover, systems are compared according to

  18. "Analysing Genre: Language Use in Professional Settings." A Review.

    Science.gov (United States)

    Drury, Helen

    1995-01-01

    "Analysing Genre," by Vijay K. Bhatia, is a timely addition to the literature on genre analysis in English for specific purposes. It is divided into three parts: the first provides theoretical background; the second explains how genre analysis works in different academic and professional settings; and the third exemplifies the…

  19. Analysing scientific workflows: Why workflows not only connect web services

    NARCIS (Netherlands)

    Wassink, I.; van der Vet, P.E.; Wolstencroft, K.; Neerincx, P.B.T.; Roos, M.; Rauwerda, H.; Breit, T.M.; Zhang, L.J.

    2009-01-01

    Life science workflow systems are developed to help life scientists to conveniently connect various programs and web services. In practice however, much time is spent on data conversion, because web services provided by different organisations use different data formats. We have analysed all the

  20. Analysing scientific workflows: why workflows not only connect web services

    NARCIS (Netherlands)

    Wassink, I.; van der Vet, P.E.; Wolstencroft, K.; Neerincx, P.B.T.; Roos, M.; Rauwerda, H.; Breit, T.M.; Zhang, LJ.

    2009-01-01

    Life science workflow systems are developed to help life scientists to conveniently connect various programs and web services. In practice however, much time is spent on data conversion, because web services provided by different organisations use different data formats. We have analysed all the

  1. Post-facta Analyses of Fukushima Accident and Lessons Learned

    Energy Technology Data Exchange (ETDEWEB)

    Tanabe, Fumiya [Sociotechnical Systems Safety Research Institute, Ichige (Japan)

    2014-08-15

    Independent analyses have been performed of the core melt behavior of the Unit 1, Unit 2 and Unit 3 reactors of Fukushima Daiichi Nuclear Power Station on 11-15 March 2011. The analyses are based on a phenomenological methodology with measured data investigation and a simple physical model calculation. Estimated are time variation of core water level, core material temperature and hydrogen generation rate. The analyses have revealed characteristics of accident process of each reactor. In the case of Unit 2 reactor, the calculated result suggests little hydrogen generation because of no steam generation in the core for zirconium-steam reaction during fuel damage process. It could be the reason of no hydrogen explosion in the Unit 2 reactor building. Analyses have been performed also on the core material behavior in another chaotic period of 19-31 March 2011, and it resulted in a re-melt hypothesis that core material in each reactor should have melted again due to shortage of cooling water. The hypothesis is consistent with many observed features of radioactive materials dispersion into the environment.

  2. Analyser-based phase contrast image reconstruction using geometrical optics

    International Nuclear Information System (INIS)

    Kitchen, M J; Pavlov, K M; Siu, K K W; Menk, R H; Tromba, G; Lewis, R A

    2007-01-01

    Analyser-based phase contrast imaging can provide radiographs of exceptional contrast at high resolution (<100 μm), whilst quantitative phase and attenuation information can be extracted using just two images when the approximations of geometrical optics are satisfied. Analytical phase retrieval can be performed by fitting the analyser rocking curve with a symmetric Pearson type VII function. The Pearson VII function provided at least a 10% better fit to experimentally measured rocking curves than linear or Gaussian functions. A test phantom, a hollow nylon cylinder, was imaged at 20 keV using a Si(1 1 1) analyser at the ELETTRA synchrotron radiation facility. Our phase retrieval method yielded a more accurate object reconstruction than methods based on a linear fit to the rocking curve. Where reconstructions failed to map expected values, calculations of the Takagi number permitted distinction between the violation of the geometrical optics conditions and the failure of curve fitting procedures. The need for synchronized object/detector translation stages was removed by using a large, divergent beam and imaging the object in segments. Our image acquisition and reconstruction procedure enables quantitative phase retrieval for systems with a divergent source and accounts for imperfections in the analyser

  3. Analyser-based phase contrast image reconstruction using geometrical optics.

    Science.gov (United States)

    Kitchen, M J; Pavlov, K M; Siu, K K W; Menk, R H; Tromba, G; Lewis, R A

    2007-07-21

    Analyser-based phase contrast imaging can provide radiographs of exceptional contrast at high resolution (geometrical optics are satisfied. Analytical phase retrieval can be performed by fitting the analyser rocking curve with a symmetric Pearson type VII function. The Pearson VII function provided at least a 10% better fit to experimentally measured rocking curves than linear or Gaussian functions. A test phantom, a hollow nylon cylinder, was imaged at 20 keV using a Si(1 1 1) analyser at the ELETTRA synchrotron radiation facility. Our phase retrieval method yielded a more accurate object reconstruction than methods based on a linear fit to the rocking curve. Where reconstructions failed to map expected values, calculations of the Takagi number permitted distinction between the violation of the geometrical optics conditions and the failure of curve fitting procedures. The need for synchronized object/detector translation stages was removed by using a large, divergent beam and imaging the object in segments. Our image acquisition and reconstruction procedure enables quantitative phase retrieval for systems with a divergent source and accounts for imperfections in the analyser.

  4. Safety analyses of the electrical systems on VVER NPP

    International Nuclear Information System (INIS)

    Andel, J.

    2004-01-01

    Energoprojekt Praha has been the main entity responsible for the section on 'Electrical Systems' in the safety reports of the Temelin, Dukovany and Mochovce nuclear power plants. The section comprises 2 main chapters, viz. Offsite Power System (issues of electrical energy production in main generators and the link to the offsite transmission grid) and Onsite Power Systems (AC and DC auxiliary system, both normal and safety related). In the chapter on the off-site system, attention is paid to the analysis of transmission capacity of the 400 kV lines, analysis of transient stability, multiple fault analyses, and probabilistic analyses of the grid and NPP power system reliability. In the chapter on the on-site system, attention is paid to the power balances of the electrical sources and switchboards set for various operational and accident modes, checks of loading and function of service and backup sources, short circuit current calculations, analyses of electrical protections, and analyses of the function and sizing of emergency sources (DG sets and UPS systems). (P.A.)

  5. A turbulent jet in crossflow analysed with proper orthogonal decomposition

    DEFF Research Database (Denmark)

    Meyer, Knud Erik; Pedersen, Jakob Martin; Özcan, Oktay

    2007-01-01

    and pipe diameter was 2400 and the jet to crossflow velocity ratios were R = 3.3 and R = 1.3. The experimental data have been analysed by proper orthogonal decomposition (POD). For R = 3.3, the results in several different planes indicate that the wake vortices are the dominant dynamic flow structures...

  6. Energy and exergy analyses of the diffusion absorption refrigeration system

    International Nuclear Information System (INIS)

    Yıldız, Abdullah; Ersöz, Mustafa Ali

    2013-01-01

    This paper describes the thermodynamic analyses of a DAR (diffusion absorption refrigeration) cycle. The experimental apparatus is set up to an ammonia–water DAR cycle with helium as the auxiliary inert gas. A thermodynamic model including mass, energy and exergy balance equations are presented for each component of the DAR cycle and this model is then validated by comparison with experimental data. In the thermodynamic analyses, energy and exergy losses for each component of the system are quantified and illustrated. The systems' energy and exergy losses and efficiencies are investigated. The highest energy and exergy losses occur in the solution heat exchanger. The highest energy losses in the experimental and theoretical analyses are found 25.7090 W and 25.4788 W respectively, whereas those losses as to exergy are calculated 13.7933 W and 13.9976 W. Although the values of energy efficiencies obtained from both the model and experimental studies are calculated as 0.1858, those values, in terms of exergy efficiencies are found 0.0260 and 0.0356. - Highlights: • The diffusion absorption refrigerator system is designed manufactured and tested. • The energy and exergy analyses of the system are presented theoretically and experimentally. • The energy and exergy losses are investigated for each component of the system. • The highest energy and exergy losses occur in the solution heat exchanger. • The energy and the exergy performances are also calculated

  7. Matrix Summaries Improve Research Reports: Secondary Analyses Using Published Literature

    Science.gov (United States)

    Zientek, Linda Reichwein; Thompson, Bruce

    2009-01-01

    Correlation matrices and standard deviations are the building blocks of many of the commonly conducted analyses in published research, and AERA and APA reporting standards recommend their inclusion when reporting research results. The authors argue that the inclusion of correlation/covariance matrices, standard deviations, and means can enhance…

  8. Genetic analyses for deciphering the status and role of ...

    Indian Academy of Sciences (India)

    Home; Journals; Journal of Genetics; Volume 96; Issue 1. Genetic analyses for deciphering the status and role of photoperiodic and maturity genes in major Indian soybean cultivars. SANJAY GUPTA VIRENDER SINGH BHATIA GIRIRAJ KUMAWAT DEVSHREE THAKUR GOURAV SINGH RACHANA TRIPATHI GYANESH ...

  9. A new Link for Geographic analyses of Inventory Data

    Science.gov (United States)

    David Reed; Kurt Pregitzer; Scott A. Pugh; Patrick D. Miles

    2001-01-01

    The USDA Forest Service Forest Inventory and Analysis (FIA)data are widely used throughout the United States for analyses of forest status and trends, landscape-level forest composition, and other forest characteristics. A new software product, FIAMODEL, is available for analyzing FIA data within the ArcView? (ESRI, Inc.)geographic information system. The software...

  10. Analyse cognitive d'une politique publique : justice ...

    African Journals Online (AJOL)

    Analyse cognitive d'une politique publique : justice environnementale et « marchés ruraux » de bois-énergie. ... energy sources to poor urban dwellers; and to reduce the poverty of rural households by promoting sustainable forest management including income generation through producing and marketing charcoal.

  11. Analysing Harmonic Motions with an iPhone's Magnetometer

    Science.gov (United States)

    Yavuz, Ahmet; Temiz, Burak Kagan

    2016-01-01

    In this paper, we propose an experiment for analysing harmonic motion using an iPhone's (or iPad's) magnetometer. This experiment consists of the detection of magnetic field variations obtained from an iPhone's magnetometer sensor. A graph of harmonic motion is directly displayed on the iPhone's screen using the "Sensor Kinetics"…

  12. A process mining approach to analyse user behaviour

    NARCIS (Netherlands)

    Maruster, Laura; Faber, Niels R.; Jorna, Rene J.; van Haren, Rob J. F.; Cordeiro, J; Filipe, J; Hammoudi, S

    2008-01-01

    Designing and personalising systems for specific user groups encompasses a lot of effort with respect to analysing and understanding user behaviour. The goal of our paper is to provide a new methodology for determining navigational patterns of behaviour of specific user groups. We consider

  13. Diagnostic Comparison of Meteorological Analyses during the 2002 Antarctic Winter

    Science.gov (United States)

    Manney, Gloria L.; Allen, Douglas R.; Kruger, Kirstin; Naujokat, Barbara; Santee, Michelle L.; Sabutis, Joseph L.; Pawson, Steven; Swinbank, Richard; Randall, Cora E.; Simmons, Adrian J.; hide

    2005-01-01

    Several meteorological datasets, including U.K. Met Office (MetO), European Centre for Medium-Range Weather Forecasts (ECMWF), National Centers for Environmental Prediction (NCEP), and NASA's Goddard Earth Observation System (GEOS-4) analyses, are being used in studies of the 2002 Southern Hemisphere (SH) stratospheric winter and Antarctic major warming. Diagnostics are compared to assess how these studies may be affected by the meteorological data used. While the overall structure and evolution of temperatures, winds, and wave diagnostics in the different analyses provide a consistent picture of the large-scale dynamics of the SH 2002 winter, several significant differences may affect detailed studies. The NCEP-NCAR reanalysis (REAN) and NCEP-Department of Energy (DOE) reanalysis-2 (REAN-2) datasets are not recommended for detailed studies, especially those related to polar processing, because of lower-stratospheric temperature biases that result in underestimates of polar processing potential, and because their winds and wave diagnostics show increasing differences from other analyses between similar to 30 and 10 hPa (their top level). Southern Hemisphere polar stratospheric temperatures in the ECMWF 40-Yr Re-analysis (ERA-40) show unrealistic vertical structure, so this long-term reanalysis is also unsuited for quantitative studies. The NCEP/Climate Prediction Center (CPC) objective analyses give an inferior representation of the upper-stratospheric vortex. Polar vortex transport barriers are similar in all analyses, but there is large variation in the amount, patterns, and timing of mixing, even among the operational assimilated datasets (ECMWF, MetO, and GEOS-4). The higher-resolution GEOS-4 and ECMWF assimilations provide significantly better representation of filamentation and small-scale structure than the other analyses, even when fields gridded at reduced resolution are studied. The choice of which analysis to use is most critical for detailed transport

  14. Radiation physics and shielding codes and analyses applied to design-assist and safety analyses of CANDUR and ACRTM reactors

    International Nuclear Information System (INIS)

    Aydogdu, K.; Boss, C. R.

    2006-01-01

    This paper discusses the radiation physics and shielding codes and analyses applied in the design of CANDU and ACR reactors. The focus is on the types of analyses undertaken rather than the inputs supplied to the engineering disciplines. Nevertheless, the discussion does show how these analyses contribute to the engineering design. Analyses in radiation physics and shielding can be categorized as either design-assist or safety and licensing (accident) analyses. Many of the analyses undertaken are designated 'design-assist' where the analyses are used to generate recommendations that directly influence plant design. These recommendations are directed at mitigating or reducing the radiation hazard of the nuclear power plant with engineered systems and components. Thus the analyses serve a primary safety function by ensuring the plant can be operated with acceptable radiation hazards to the workers and public. In addition to this role of design assist, radiation physics and shielding codes are also deployed in safety and licensing assessments of the consequences of radioactive releases of gaseous and liquid effluents during normal operation and gaseous effluents following accidents. In the latter category, the final consequences of accident sequences, expressed in terms of radiation dose to members of the public, and inputs to accident analysis, e.g., decay heat in fuel following a loss-of-coolant accident, are also calculated. Another role of the analyses is to demonstrate that the design of the plant satisfies the principle of ALARA (as low as reasonably achievable) radiation doses. This principle is applied throughout the design process to minimize worker and public doses. The principle of ALARA is an inherent part of all design-assist recommendations and safety and licensing assessments. The main focus of an ALARA exercise at the design stage is to minimize the radiation hazards at the source. This exploits material selection and impurity specifications and relies

  15. Pollen analyses of Pleistocene hyaena coprolites from Montenegro and Serbia

    Directory of Open Access Journals (Sweden)

    Argant Jacqueline

    2007-01-01

    Full Text Available The results of pollen analyses of hyaena coprolites from the Early Pleistocene cave of Trlica in northern Montenegro and the Late Pleistocene cave of Baranica in southeast Serbia are described. The Early Pleistocene Pachycrocuta brevirostris, and the Late Pleistocene Crocuta spelaea are coprolite-producing species. Although the pollen concentration was rather low, the presented analyses add considerably to the much-needed knowledge of the vegetation of the central Balkans during the Pleistocene. Pollen extracted from a coprolite from the Baranica cave indicates an open landscape with the presence of steppe taxa, which is in accordance with the recorded conditions and faunal remains. Pollen analysis of the Early Pleistocene samples from Trlica indicate fresh and temperate humid climatic conditions, as well as the co-existence of several biotopes which formed a mosaic landscape in the vicinity of the cave.

  16. Criticality safety analyses in SKODA JS a.s

    International Nuclear Information System (INIS)

    Mikolas, P.; Svarny, J.

    1999-01-01

    This paper describes criticality safety analyses of spent fuel systems for storage and transport of spent fuel performed in SKODA JS s.r.o.. Analyses were performed for different systems both at NPP site including originally designed spent fuel pool with a large pitch between assemblies without any special absorbing material, high density spent fuel pool with an additional absorption by boron steel, depository rack for fresh fuel assemblies with a very large pitch between fuel assemblies, a container for transport of fresh fuel into the reactor pool and a cask for transport and storage of spent fuel and container for final storage depository. required subcriticality has been proven taking into account all possible unfavourable conditions, uncertainties etc. In two cases, burnup credit methodology is expected to be used. (Authors)

  17. Iterative categorization (IC): a systematic technique for analysing qualitative data

    Science.gov (United States)

    2016-01-01

    Abstract The processes of analysing qualitative data, particularly the stage between coding and publication, are often vague and/or poorly explained within addiction science and research more broadly. A simple but rigorous and transparent technique for analysing qualitative textual data, developed within the field of addiction, is described. The technique, iterative categorization (IC), is suitable for use with inductive and deductive codes and can support a range of common analytical approaches, e.g. thematic analysis, Framework, constant comparison, analytical induction, content analysis, conversational analysis, discourse analysis, interpretative phenomenological analysis and narrative analysis. Once the data have been coded, the only software required is a standard word processing package. Worked examples are provided. PMID:26806155

  18. Multivariate analyses of crater parameters and the classification of craters

    Science.gov (United States)

    Siegal, B. S.; Griffiths, J. C.

    1974-01-01

    Multivariate analyses were performed on certain linear dimensions of six genetic types of craters. A total of 320 craters, consisting of laboratory fluidization craters, craters formed by chemical and nuclear explosives, terrestrial maars and other volcanic craters, and terrestrial meteorite impact craters, authenticated and probable, were analyzed in the first data set in terms of their mean rim crest diameter, mean interior relief, rim height, and mean exterior rim width. The second data set contained an additional 91 terrestrial craters of which 19 were of experimental percussive impact and 28 of volcanic collapse origin, and which was analyzed in terms of mean rim crest diameter, mean interior relief, and rim height. Principal component analyses were performed on the six genetic types of craters. Ninety per cent of the variation in the variables can be accounted for by two components. Ninety-nine per cent of the variation in the craters formed by chemical and nuclear explosives is explained by the first component alone.

  19. Hydrogen-combustion analyses of large-scale tests

    International Nuclear Information System (INIS)

    Gido, R.G.; Koestel, A.

    1986-01-01

    This report uses results of the large-scale tests with turbulence performed by the Electric Power Research Institute at the Nevada Test Site to evaluate hydrogen burn-analysis procedures based on lumped-parameter codes like COMPARE-H2 and associated burn-parameter models. The test results: (1) confirmed, in a general way, the procedures for application to pulsed burning, (2) increased significantly our understanding of the burn phenomenon by demonstrating that continuous burning can occur, and (3) indicated that steam can terminate continuous burning. Future actions recommended include: (1) modification of the code to perform continuous-burn analyses, which is demonstrated, (2) analyses to determine the type of burning (pulsed or continuous) that will exist in nuclear containments and the stable location if the burning is continuous, and (3) changes to the models for estimating burn parameters

  20. Hydrogen-combustion analyses of large-scale tests

    International Nuclear Information System (INIS)

    Gido, R.G.; Koestel, A.

    1986-01-01

    This report uses results of the large-scale tests with turbulence performed by the Electric Power Research Institute at the Nevada Test Site to evaluate hydrogen burn-analysis procedures based on lumped-parameter codes like COMPARE-H2 and associated burn-parameter models. The test results (a) confirmed, in a general way, the procedures for application to pulsed burning, (b) increased significantly our understanding of the burn phenomenon by demonstrating that continuous burning can occur and (c) indicated that steam can terminate continuous burning. Future actions recommended include (a) modification of the code to perform continuous-burn analyses, which is demonstrated, (b) analyses to determine the type of burning (pulsed or continuous) that will exist in nuclear containments and the stable location if the burning is continuous, and (c) changes to the models for estimating burn parameters

  1. Contribution of thermo-fluid analyses to the LHC experiments

    CERN Document Server

    Gasser, G

    2003-01-01

    The big amount of electrical and electronic equipment that will be installed in the four LHC experiments will cause important heat dissipation into the detectors’ volumes. This is a major issue for the experimental groups, as temperature stability is often a fundamental requirement for the different sub-detectors to be able to provide a good measurement quality. The thermofluid analyses that are carried out in the ST/CV group are a very efficient tool to understand and predict the thermal behaviour of the detectors. These studies are undertaken according to the needs of the experimental groups; they aim at evaluate the thermal stability for a proposed design, or to compare different technical solutions in order to choose the best one for the final design. The usual approach to carry out these studies is first presented and then, some practical examples of thermo-fluid analyses are presented focusing on the main results in order to illustrate their contribution.

  2. Numerical analyses of an aircraft crash on containment building

    Energy Technology Data Exchange (ETDEWEB)

    Sim, Jae Min; Kim, Seung Hyun; Chang, Yoon Suk [Kyunghee University, Yongin (Korea, Republic of)

    2016-05-15

    The containment building is responsible to isolate and protect internal devices against external conditions like earthquake, hurricane and impact loading. It has also to protect leakage of radioactivity, like LOCA (Loss Of Coolant Accident), when severe accidents occurred. Meanwhile, social awareness such as terrorism has been increased globally after international aircraft crashes at World Trade Center and Pentagon. In this paper, FE (Finite Element) analyses according to variation of crash locations and speeds were carried out to examine the aircraft crash impact on a domestic containment building. In this paper, numerical analyses of aircraft crash on NPP's containment building were performed taking into account different locations and aircraft speeds. (1) Amounts of concrete failure were dependent on the crash locations and the connector was the most delicate location comparing to the dome and wall part. (2) Maximum stress values generated at the liner plate and rebars did not exceed their UTS values.

  3. A database structure for radiological optimization analyses of decommissioning operations

    International Nuclear Information System (INIS)

    Zeevaert, T.; Van de Walle, B.

    1995-09-01

    The structure of a database for decommissioning experiences is described. Radiological optimization is a major radiation protection principle in practices and interventions, involving radiological protection factors, economic costs, social factors. An important lack of knowledge with respect to these factors exists in the domain of the decommissioning of nuclear power plants, due to the low number of decommissioning operations already performed. Moreover, decommissioning takes place only once for a installation. Tasks, techniques, and procedures are in most cases rather specific, limiting the use of past experiences in the radiological optimization analyses of new decommissioning operations. Therefore, it is important that relevant data or information be acquired from decommissioning experiences. These data have to be stored in a database in a way they can be used efficiently in ALARA analyses of future decommissioning activities

  4. Iterative categorization (IC): a systematic technique for analysing qualitative data.

    Science.gov (United States)

    Neale, Joanne

    2016-06-01

    The processes of analysing qualitative data, particularly the stage between coding and publication, are often vague and/or poorly explained within addiction science and research more broadly. A simple but rigorous and transparent technique for analysing qualitative textual data, developed within the field of addiction, is described. The technique, iterative categorization (IC), is suitable for use with inductive and deductive codes and can support a range of common analytical approaches, e.g. thematic analysis, Framework, constant comparison, analytical induction, content analysis, conversational analysis, discourse analysis, interpretative phenomenological analysis and narrative analysis. Once the data have been coded, the only software required is a standard word processing package. Worked examples are provided. © 2016 The Authors. Addiction published by John Wiley & Sons Ltd on behalf of Society for the Study of Addiction.

  5. Quantitative metagenomic analyses based on average genome size normalization

    DEFF Research Database (Denmark)

    Frank, Jeremy Alexander; Sørensen, Søren Johannes

    2011-01-01

    provide not just a census of the community members but direct information on metabolic capabilities and potential interactions among community members. Here we introduce a method for the quantitative characterization and comparison of microbial communities based on the normalization of metagenomic data...... marine sources using both conventional small-subunit (SSU) rRNA gene analyses and our quantitative method to calculate the proportion of genomes in each sample that are capable of a particular metabolic trait. With both environments, to determine what proportion of each community they make up and how......). These analyses demonstrate how genome proportionality compares to SSU rRNA gene relative abundance and how factors such as average genome size and SSU rRNA gene copy number affect sampling probability and therefore both types of community analysis....

  6. Thermal analyses of the IF-300 shipping cask

    International Nuclear Information System (INIS)

    Meier, J.K.

    1978-07-01

    In order to supply temperature data for structural testing and analysis of shipping casks, a series of thermal analyses using the TRUMP thermal analyzer program were performed on the GE IF-300 spent fuel shipping cask. Major conclusions of the analyses are: (1) Under normal cooling conditions and a cask heat load of 262,000 BTU/h, the seal area of the cask will be roughly 100 0 C (180 0 F) above the ambient surroundings. (2) Under these same conditions the uranium shield at the midpoint of the cask will be between 69 0 C (125 0 F) and 92 0 C (166 0 F) above the ambient surroundings. (3) Significant thermal gradients are not likely to develop between the head studs and the surrounding metal. (4) A representative time constant for the cask as a whole is on the order of one day

  7. CPN Tools for Editing, Simulating, and Analysing Coloured Petri Nets

    DEFF Research Database (Denmark)

    Ratzer, Anne Vinter; Wells, Lisa Marie; Lassen, Henry Michael

    2003-01-01

    CPN Tools is a tool for editing, simulating and analysing Coloured Petri Nets. The GUI is based on advanced interaction techniques, such as toolglasses, marking menus, and bi-manual interaction. Feedback facilities provide contextual error messages and indicate dependency relationships between ne...... information such as boundedness properties and liveness properties. The functionality of the simulation engine and state space facilities are similar to the corresponding components in Design/CPN, which is a widespread tool for Coloured Petri Nets.......CPN Tools is a tool for editing, simulating and analysing Coloured Petri Nets. The GUI is based on advanced interaction techniques, such as toolglasses, marking menus, and bi-manual interaction. Feedback facilities provide contextual error messages and indicate dependency relationships between net...

  8. Applications of MIDAS regression in analysing trends in water quality

    Science.gov (United States)

    Penev, Spiridon; Leonte, Daniela; Lazarov, Zdravetz; Mann, Rob A.

    2014-04-01

    We discuss novel statistical methods in analysing trends in water quality. Such analysis uses complex data sets of different classes of variables, including water quality, hydrological and meteorological. We analyse the effect of rainfall and flow on trends in water quality utilising a flexible model called Mixed Data Sampling (MIDAS). This model arises because of the mixed frequency in the data collection. Typically, water quality variables are sampled fortnightly, whereas the rain data is sampled daily. The advantage of using MIDAS regression is in the flexible and parsimonious modelling of the influence of the rain and flow on trends in water quality variables. We discuss the model and its implementation on a data set from the Shoalhaven Supply System and Catchments in the state of New South Wales, Australia. Information criteria indicate that MIDAS modelling improves upon simplistic approaches that do not utilise the mixed data sampling nature of the data.

  9. Elemental abundance and analyses with coadded DAO spectrograms

    International Nuclear Information System (INIS)

    Adelman, S.J.

    1987-01-01

    One can improve the quality of elemental abundance analyses by using higher signal-to-noise data than has been the practice at high resolution. The procedures developed at the Dominion Astrophysical Observatory to coadd high-dispersion coude spectrograms are used with a minimum of 10 6.5 A mm -1 IIa-O spectrograms of each of three field horizontal-branch (FHB)A stars to increase the signal-to-noise ratio of the photographic data over a considerable wavelength region. Fine analyses of the sharp-lined prototype FHB stars HD 109995 and 161817 show an internal consistency which justifies this effort. Their photospheric elemental abundances are similar to those of Population II globular cluster giants. (author)

  10. Sensitivity and uncertainty analyses for performance assessment modeling

    International Nuclear Information System (INIS)

    Doctor, P.G.

    1988-08-01

    Sensitivity and uncertainty analyses methods for computer models are being applied in performance assessment modeling in the geologic high level radioactive waste repository program. The models used in performance assessment tend to be complex physical/chemical models with large numbers of input variables. There are two basic approaches to sensitivity and uncertainty analyses: deterministic and statistical. The deterministic approach to sensitivity analysis involves numerical calculation or employs the adjoint form of a partial differential equation to compute partial derivatives; the uncertainty analysis is based on Taylor series expansions of the input variables propagated through the model to compute means and variances of the output variable. The statistical approach to sensitivity analysis involves a response surface approximation to the model with the sensitivity coefficients calculated from the response surface parameters; the uncertainty analysis is based on simulation. The methods each have strengths and weaknesses. 44 refs

  11. Analysing spatially extended high-dimensional dynamics by recurrence plots

    Energy Technology Data Exchange (ETDEWEB)

    Marwan, Norbert, E-mail: marwan@pik-potsdam.de [Potsdam Institute for Climate Impact Research, 14412 Potsdam (Germany); Kurths, Jürgen [Potsdam Institute for Climate Impact Research, 14412 Potsdam (Germany); Humboldt Universität zu Berlin, Institut für Physik (Germany); Nizhny Novgorod State University, Department of Control Theory, Nizhny Novgorod (Russian Federation); Foerster, Saskia [GFZ German Research Centre for Geosciences, Section 1.4 Remote Sensing, Telegrafenberg, 14473 Potsdam (Germany)

    2015-05-08

    Recurrence plot based measures of complexity are capable tools for characterizing complex dynamics. In this letter we show the potential of selected recurrence plot measures for the investigation of even high-dimensional dynamics. We apply this method on spatially extended chaos, such as derived from the Lorenz96 model and show that the recurrence plot based measures can qualitatively characterize typical dynamical properties such as chaotic or periodic dynamics. Moreover, we demonstrate its power by analysing satellite image time series of vegetation cover with contrasting dynamics as a spatially extended and potentially high-dimensional example from the real world. - Highlights: • We use recurrence plots for analysing partially extended dynamics. • We investigate the high-dimensional chaos of the Lorenz96 model. • The approach distinguishes different spatio-temporal dynamics. • We use the method for studying vegetation cover time series.

  12. SVM models for analysing the headstreams of mine water inrush

    Energy Technology Data Exchange (ETDEWEB)

    Yan Zhi-gang; Du Pei-jun; Guo Da-zhi [China University of Science and Technology, Xuzhou (China). School of Environmental Science and Spatial Informatics

    2007-08-15

    The support vector machine (SVM) model was introduced to analyse the headstrean of water inrush in a coal mine. The SVM model, based on a hydrogeochemical method, was constructed for recognising two kinds of headstreams and the H-SVMs model was constructed for recognising multi- headstreams. The SVM method was applied to analyse the conditions of two mixed headstreams and the value of the SVM decision function was investigated as a means of denoting the hydrogeochemical abnormality. The experimental results show that the SVM is based on a strict mathematical theory, has a simple structure and a good overall performance. Moreover the parameter W in the decision function can describe the weights of discrimination indices of the headstream of water inrush. The value of the decision function can denote hydrogeochemistry abnormality, which is significant in the prevention of water inrush in a coal mine. 9 refs., 1 fig., 7 tabs.

  13. Physiological and enzymatic analyses of pineapple subjected to ionizing radiation

    International Nuclear Information System (INIS)

    Silva, Josenilda Maria da; Silva, Juliana Pizarro; Spoto, Marta Helena Fillet

    2007-01-01

    The physiological and enzymatic post-harvest characteristics of the pineapple cultivar Smooth Cayenne were evaluated after the fruits were gamma-irradiated with doses of 100 and 150 Gy and the fruits were stored for 10, 20 and 30 days at 12 deg C (±1) and relative humidity of 85% (±5). Physiological and enzymatic analyses were made for each storage period to evaluate the alterations resulting from the application of ionizing radiation. Control specimens showed higher values of soluble pectins, total pectins, reducing sugars, sucrose and total sugars and lower values of polyphenyloxidase and polygalacturonase enzyme activities. All the analyses indicated that storage time is a significantly influencing factor. The 100 Gy dosage and 20-day storage period presented the best results from the standpoint of maturation and conservation of the fruits quality. (author)

  14. Engineering analyses of ITER divertor diagnostic rack design

    Energy Technology Data Exchange (ETDEWEB)

    Modestov, Victor S., E-mail: modestov@compmechlab.com [St Petersburg State Polytechnical University, 195251 St Petersburg, 29 Polytechnicheskaya (Russian Federation); Nemov, Alexander S.; Borovkov, Aleksey I.; Buslakov, Igor V.; Lukin, Aleksey V. [St Petersburg State Polytechnical University, 195251 St Petersburg, 29 Polytechnicheskaya (Russian Federation); Kochergin, Mikhail M.; Mukhin, Eugene E.; Litvinov, Andrey E.; Koval, Alexandr N. [Ioffe Physico-Technical Institute, 194021 St Petersburg, 26 Polytechnicheskaya (Russian Federation); Andrew, Philip [ITER Organization, Route de Vinon sur Verdon, 13115 Saint Paul Lez Durance (France)

    2013-10-15

    Highlights: • The approach developed early has been used for the assessment of new design of DTS racks and neutron shield units. • Results of most critical EM and seismic analyses indicate that introduced changes significantly improved the system behaviour under these loads. • However further research is required to finalize the design and check it upon meeting all structural, thermal, seismic, EM and fatigue requirements. -- Abstract: The divertor port racks used as a support structure of the divertor Thomson scattering equipment has been carefully analyzed to be consistent with electromagnetic and seismic loads. It follows from the foregoing simulations that namely these analyses demonstrate critical challenges associated with the structure design. Based on the results of the reference structure [2] a modified design of the diagnostic racks is proposed and updated simulation results are given. The results signify a significant improvement over the previous reference layout and the design will be continued towards finalization.

  15. A MULTIVARIATE APPROACH TO ANALYSE NATIVE FOREST TREE SPECIE SEEDS

    Directory of Open Access Journals (Sweden)

    Alessandro Dal Col Lúcio

    2006-03-01

    Full Text Available This work grouped, by species, the most similar seed tree, using the variables observed in exotic forest species of theBrazilian flora of seeds collected in the Forest Research and Soil Conservation Center of Santa Maria, Rio Grande do Sul, analyzedfrom January, 1997, to march, 2003. For the cluster analysis, all the species that possessed four or more analyses per lot wereanalyzed by the hierarchical Clustering method, of the standardized Euclidian medium distance, being also a principal componentanalysis technique for reducing the number of variables. The species Callistemon speciosus, Cassia fistula, Eucalyptus grandis,Eucalyptus robusta, Eucalyptus saligna, Eucalyptus tereticornis, Delonix regia, Jacaranda mimosaefolia e Pinus elliottii presentedmore than four analyses per lot, in which the third and fourth main components explained 80% of the total variation. The clusteranalysis was efficient in the separation of the groups of all tested species, as well as the method of the main components.

  16. Lipid analyses of fumigated vs irradiated raw and roasted almonds

    International Nuclear Information System (INIS)

    Uthman, R.S.; Toma, R.B.; Garcia, R.; Medora, N.P.; Cunningham, S.

    1998-01-01

    The purpose of this study was to compare the effects of propylene oxide (PO) and irradiation treatments on the lipid analyses of raw and roasted almonds. Eight kilograms each of raw and roasted almonds were divided into four batches (2 kg each). Three of the batches were subjected to PO treatment or irradiation treatment with a dose of 6, 10·5 kGy. The untreated batch served as control samples, they were taken from all the batches at three consecutive times during storage (day 0, 8 weeks and 16 weeks) and analysed for iodine number, peroxide value and 2-thiobarbituric acid number. Overall, irradiated almonds incurred a higher variation in lipid stability than PO tested almonds while roasted almonds incurred a higher variation than raw almonds

  17. Neoliberalism in education: Five images of critical analyses

    Directory of Open Access Journals (Sweden)

    Branislav Pupala

    2011-03-01

    Full Text Available The survey study brings information about the way that educational researchcopes with neoliberalism as a generalized form of social government in the currentwestern culture. It shows that neoliberalism is considered as a universal scope of otherchanges in the basic segments of education and those theoretical and critical analyses ofthis phenomenon represent an important part of production in the area of educationalresearch. It emphasizes the contribution of formation and development of the socalledgovernmental studies for comprehension of mechanisms and consequences ofneoliberal government of the society and shows how way the methodology of thesestudies helps to identify neoliberal strategies used in the regulation of social subjectsby education. There are five selected segments of critical analyses elaborated (fromthe concept of a lifelong learning, through preschool and university education to theeducation of teachers and PISA project that obviously show ideological and theoreticalcohesiveness of the education analysis through the scope of neoliberal governmentality.

  18. Energy and exergy analyses of electrolytic hydrogen production

    Energy Technology Data Exchange (ETDEWEB)

    Rosen, M A [Ryerson Polytechnic Univ., Toronto, ON (Canada). Dept. of Mechanical Engineering

    1995-07-01

    The thermodynamic performance is investigated of a water-electrolysis process for producing hydrogen, based on current-technology equipment. Both energy and exergy analyses are used. Three cases are considered in which the principal driving energy inputs are (i) electricity, (ii) the high-temperature heat used to generate the electricity, and (iii) the heat source used to produce the high-temperature heat. The nature of the heat source (e.g.) fossil fuel, nuclear fuel, solar energy, (etc.) is left as general as possible. The analyses indicate that, when the main driving input is the hypothetical heat source, the principal thermodynamic losses are associated with water splitting, electricity generation and heat production; the losses are mainly due to the irreversibilities associated with converting a heat source to heat, and heat transfer across large temperature differences. The losses associated with the waste heat in used cooling water, because of its low quality, are not as significant as energy analysis indicates. (Author)

  19. Phylogenomic analyses data of the avian phylogenomics project

    DEFF Research Database (Denmark)

    Jarvis, Erich D; Mirarab, Siavash; Aberer, Andre J

    2015-01-01

    BACKGROUND: Determining the evolutionary relationships among the major lineages of extant birds has been one of the biggest challenges in systematic biology. To address this challenge, we assembled or collected the genomes of 48 avian species spanning most orders of birds, including all Neognathae...... and two of the five Palaeognathae orders. We used these genomes to construct a genome-scale avian phylogenetic tree and perform comparative genomic analyses. FINDINGS: Here we present the datasets associated with the phylogenomic analyses, which include sequence alignment files consisting of nucleotides......ML algorithm or when using statistical binning with the coalescence-based MP-EST algorithm (which we refer to as MP-EST*). Other data sets, such as the coding sequence of some exons, revealed other properties of genome evolution, namely convergence. CONCLUSIONS: The Avian Phylogenomics Project is the largest...

  20. Process for carrying out analyses based on concurrent reactions

    Energy Technology Data Exchange (ETDEWEB)

    Glover, J S; Shepherd, B P

    1980-01-03

    The invention refers to a process for carrying out analyses based on concurrent reactions. A part of a compound to be analysed is subjected with a standard quantity of this compound in a labelled form to a common reaction with a standard quantity of a reagent, which must be less than the sum of the two parts of the reacting compound. The parts of the marked reaction compound and the labelled final compound resulting from the concurrence are separated in a tube (e.g. by centrifuging) after forced phase change (precipitation, absorption etc.) and the radio-activity of both phases in contact is measured separately. The shielded measuring device developed for this and suitable for centrifuge tubes of known dimensions is also included in the patent claims. The insulin concentration of a defined serum is measured as an example of the applications of the method (Radioimmunoassay).