WorldWideScience

Sample records for analogues augmented nerve-mediated

  1. Augmented postcard

    OpenAIRE

    Bernik , Aleš

    2012-01-01

    The aim of this thesis is the examination of augmented reality technology, which allows us mixing real and virtual elements. Augmented reality is a relatively new technology which is becoming more widespread, thanks to a fairly reasonable price of smart phones. Here we presents the types of augmented reality, the necessary technology and their advantages and disadvantages, its current use in applications, and software for building augmented reality applications. The thesis is mainly focuse...

  2. Differential sensitivity of myosin-heavy-chain-typed fibers to distinct aggregates of nerve-mediated activation.

    Science.gov (United States)

    Dunn, S E; Michel, R N

    1999-02-01

    We studied the regulatory effects of nerve-mediated activity on the early expression of embryonic and adult myosin heavy chains (MHC) within inactive though still innervated rat plantaris and soleus muscle fibers. To this end, we stimulated motor nerves that were quiescent following treatment with tetrodotoxin (TTX) with paradigms designed to partition the influence of neural activation frequency and assessed the selective expression and accumulation of MHCs within muscle fibers using an array of specific antibodies. We show rapid de novo expression of IIx MHC within select soleus fibers in response to high-frequency activation for more than 0.01% of daily time. High-frequency aggregates were also the most effective in preventing the TTX-induced reexpression of embryonic MHCs within specific fibers. Only configurations that included high-frequency trains for more than 0.01% of daily time or combined with 10 Hz stimulation preserved the size of select fibers, used as a measure of the net cellular content of MHC. The effectiveness of this preservation varied according to the muscle type and MHC expressed, and, in a subset of fibers, was influenced by contractile loading status. Our results demonstrate that distinct subsets of MHC-typed fibers are differentially sensitive to the neural activation cues mediating the cellular expression of these proteins.

  3. Augmented Reality

    DEFF Research Database (Denmark)

    Kjærgaard, Hanne Wacher; Kjeldsen, Lars Peter Bech; Rahn, Annette

    2015-01-01

    This chapter describes the use of iPad-facilitated application of augmented reality in the teaching of highly complex anatomical and physiological subjects in the training of nurses at undergraduate level. The general aim of the project is to investigate the potentials of this application in terms...... of augmented reality are discussed....

  4. ARLearn: augmented reality meets augmented virtuality

    NARCIS (Netherlands)

    Ternier, Stefaan; Klemke, Roland; Kalz, Marco; Van Ulzen, Patricia; Specht, Marcus

    2012-01-01

    Ternier, S., Klemke, R., Kalz, M., Van Ulzen, P., & Specht, M. (2012). ARLearn: augmented reality meets augmented virtuality [Special issue]. Journal of Universal Computer Science - Technology for learning across physical and virtual spaces, 18(15), 2143-2164.

  5. Analogue computing methods

    CERN Document Server

    Welbourne, D

    1965-01-01

    Analogue Computing Methods presents the field of analogue computation and simulation in a compact and convenient form, providing an outline of models and analogues that have been produced to solve physical problems for the engineer and how to use and program the electronic analogue computer. This book consists of six chapters. The first chapter provides an introduction to analogue computation and discusses certain mathematical techniques. The electronic equipment of an analogue computer is covered in Chapter 2, while its use to solve simple problems, including the method of scaling is elaborat

  6. Glucagon-like peptide-1 analogues: An overview

    Directory of Open Access Journals (Sweden)

    Vishal Gupta

    2013-01-01

    Full Text Available Abnormalities of the incretin axis have been implicated in the pathogenesis of type 2 diabetes mellitus. Glucagon-like peptide-1 (GLP-1 and gastroinhibitory intestinal peptide constitutes >90% of all the incretin function. Augmentation of GLP-1 results in improvement of beta cell health in a glucose-dependant manner (post-prandial hyperglycemia and suppression of glucagon (fasting hyperglycemia, amongst other beneficial pleiotropic effects. Native GLP-1 has a very short plasma half-life and novel methods have been developed to augment its half life, such that its anti-hyperglycemic effects can be exploited. They can be broadly classified as exendin-based therapies (exenatide, exenatide once weekly, DPP-4-resistant analogues (lixisenatide, albiglutide, and analogues of human GLP-1 (liraglutide, taspoglutide. Currently, commercially available analogues are exenatide, exenatide once weekly, and liraglutide. This review aims to provide an overview of most GLP-1 analogues.

  7. Augmented Reality in Astrophysics

    OpenAIRE

    Vogt, Frédéric P. A.; Shingles, Luke J.

    2013-01-01

    Augmented Reality consists of merging live images with virtual layers of information. The rapid growth in the popularity of smartphones and tablets over recent years has provided a large base of potential users of Augmented Reality technology, and virtual layers of information can now be attached to a wide variety of physical objects. In this article, we explore the potential of Augmented Reality for astrophysical research with two distinct experiments: (1) Augmented Posters and (2) Augmented...

  8. Analogue MIMO Detection

    Directory of Open Access Journals (Sweden)

    McNamara Darren

    2006-01-01

    Full Text Available In this contribution we propose an analogue receiver that can perform turbo detection in MIMO systems. We present the case for a receiver that is built from nonlinear analogue devices, which perform detection in a "free-flow" network (no notion of iterations. This contribution can be viewed as an extension of analogue turbo decoder concepts to include MIMO detection. These first analogue implementations report reductions of few orders of magnitude in the number of required transistors and in consumed energy, and the same order of improvement in processing speed. It is anticipated that such analogue MIMO decoder could bring about the same advantages, when compared to traditional digital implementations.

  9. Augmented Reality in Astrophysics

    CERN Document Server

    Vogt, Frédéric P A

    2013-01-01

    Augmented Reality consists of merging live images with virtual layers of information. The rapid growth in the popularity of smartphones and tablets over recent years has provided a large base of potential users of Augmented Reality technology, and virtual layers of information can now be attached to a wide variety of physical objects. In this article, we explore the potential of Augmented Reality for astrophysical research with two distinct experiments: (1) Augmented Posters and (2) Augmented Articles. We demonstrate that the emerging technology of Augmented Reality can already be used and implemented without expert knowledge using currently available apps. Our experiments highlight the potential of Augmented Reality to improve the communication of scientific results in the field of astrophysics. We also present feedback gathered from the Australian astrophysics community that reveals evidence of some interest in this technology by astronomers who experimented with Augmented Posters. In addition, we discuss p...

  10. Inductively Coupled Augmented Railgun

    CERN Document Server

    Bahder, Thomas B

    2011-01-01

    We derive the non-linear dynamical equations for an augmented electromagnetic railgun, whose augmentation circuit is inductively coupled to the gun circuit. We solve these differential equations numerically using example parameter values. We find a complicated interaction between the augmentation circuit, gun circuit, and mechanical degrees of freedom, leading to a complicated optimization problem. For certain values of parameters, we find that an augmented electromagnetic railgun has an armature kinetic energy that is 42% larger than the same railgun with no augmentation circuit. Optimizing the parameters may lead to further increase in performance.

  11. Survey of analogue spacetimes

    CERN Document Server

    Visser, Matt

    2013-01-01

    Analogue spacetimes, (and more boldly, analogue models both of and for gravity), have attracted significant and increasing attention over the last decade and a half. Perhaps the most straightforward physical example, which serves as a template for most of the others, is Bill Unruh's model for a dumb hole, (mute black hole, acoustic black hole), wherein sound is dragged along by a moving fluid --- and can even be trapped behind an acoustic horizon. This and related analogue models for curved spacetimes are useful in many ways: Analogue spacetimes provide general relativists with extremely concrete physical models to help focus their thinking, and conversely the techniques of curved spacetime can sometimes help improve our understanding of condensed matter and/or optical systems by providing an unexpected and countervailing viewpoint. In this introductory chapter, I shall provide a few simple examples of analogue spacetimes as general background for the rest of the contributions.

  12. Confronting an augmented reality

    OpenAIRE

    Munnerley, Danny; Bacon, Matt; Wilson, Anna,; Steele, James; Hedberg, John; Fitzgerald, Robert

    2012-01-01

    How can educators make use of augmented reality technologies and practices to enhance learning and why would we want to embrace such technologies anyway? How can an augmented reality help a learner confront, interpret and ultimately comprehend reality itself ? In this article, we seek to initiate a discussion that focuses on these questions, and suggest that they be used as drivers for research into effective educational applications of augmented reality. We discuss how multi-modal, sensorial...

  13. Adaptive Augmented Reality: Plasticity of Augmentations

    OpenAIRE

    Ghouaiel, Nehla; Cieutat, Jean-Marc; Jessel, Jean-Pierre

    2014-01-01

    International audience An augmented reality system is used to complete the real world with virtual objects (computer generated) so they seem to coexist in the same space as the real world. The concept of plasticity [4][5] was first introduced for Human Computer Interaction (HCI). It denotes the ability of an HCI interface to fit the context of use defined by the user, the environment and the platform. We believe that plasticity is a very important notion in the domain of augmented reality....

  14. Confronting an Augmented Reality

    Science.gov (United States)

    Munnerley, Danny; Bacon, Matt; Wilson, Anna; Steele, James; Hedberg, John; Fitzgerald, Robert

    2012-01-01

    How can educators make use of augmented reality technologies and practices to enhance learning and why would we want to embrace such technologies anyway? How can an augmented reality help a learner confront, interpret and ultimately comprehend reality itself ? In this article, we seek to initiate a discussion that focuses on these questions, and…

  15. Augmented Spinor Space

    Institute of Scientific and Technical Information of China (English)

    Xiuhong FENG; Lin ZHU; Yanlin YU

    2007-01-01

    In this paper, based on the Pauli matrices, a notion of augmented spinor space is introduced, and a uniqueness of such augmented spinor space of rank n is proved. It may be expected that this new notion of spaces can be used in mathematical physics and geometry.

  16. Synthesis of Tonghaosu Analogues

    Institute of Scientific and Technical Information of China (English)

    SUN Hai; LIN Yingjie; WU Yulin; WU Yikang

    2009-01-01

    Several new analogues of natural antifeedant tonghaosu were synthesized via m-CPBA (m-chloroperoxybenzoic acid) oxidation of corresponding 3-(a-furyl)propanols, Luche reduction of the resulting enone, epoxidation, acid-mediated spiroketalization, and radical mediated dehydration.

  17. Augmented reality: a review.

    Science.gov (United States)

    Berryman, Donna R

    2012-01-01

    Augmented reality is a technology that overlays digital information on objects or places in the real world for the purpose of enhancing the user experience. It is not virtual reality, that is, the technology that creates a totally digital or computer created environment. Augmented reality, with its ability to combine reality and digital information, is being studied and implemented in medicine, marketing, museums, fashion, and numerous other areas. This article presents an overview of augmented reality, discussing what it is, how it works, its current implementations, and its potential impact on libraries. PMID:22559183

  18. Augmented reality: a review.

    Science.gov (United States)

    Berryman, Donna R

    2012-01-01

    Augmented reality is a technology that overlays digital information on objects or places in the real world for the purpose of enhancing the user experience. It is not virtual reality, that is, the technology that creates a totally digital or computer created environment. Augmented reality, with its ability to combine reality and digital information, is being studied and implemented in medicine, marketing, museums, fashion, and numerous other areas. This article presents an overview of augmented reality, discussing what it is, how it works, its current implementations, and its potential impact on libraries.

  19. Marketing and Augmented Reality

    OpenAIRE

    Zelený, Martin

    2010-01-01

    The main goal of this diploma thesis is to identify the usage of augmented reality in contemporary marketing practice and the expectations of marketers for the future use. This will be achieved by conducting a quantitative and qualitative research among existing creative and advertising companies. Secondary goal is introducing the concept of augmented reality from the theoretical point of view and also description of potential utilization based on known examples. The tools for the practical p...

  20. Interactive augmented reality

    OpenAIRE

    Moret Gabarró, Roger

    2010-01-01

    Projecte final de carrera realitzat en col.laboració amb el Royal Institute of Technology Augmented reality can provide a new experience to users by adding virtual objects where they are relevant in the real world. The new generation of mobile phones offers a platform to develop augmented reality application for industry as well as for the general public. Although some applications are reaching commercial viability, the technology is still limited. The main problem designers have to face w...

  1. Confronting an augmented reality

    Directory of Open Access Journals (Sweden)

    John Hedberg

    2012-08-01

    Full Text Available How can educators make use of augmented reality technologies and practices to enhance learning and why would we want to embrace such technologies anyway? How can an augmented reality help a learner confront, interpret and ultimately comprehend reality itself? In this article, we seek to initiate a discussion that focuses on these questions, and suggest that they be used as drivers for research into effective educational applications of augmented reality. We discuss how multi-modal, sensorial augmentation of reality links to existing theories of education and learning, focusing on ideas of cognitive dissonance and the confrontation of new realities implied by exposure to new and varied perspectives. We also discuss connections with broader debates brought on by the social and cultural changes wrought by the increased digitalisation of our lives, especially the concept of the extended mind. Rather than offer a prescription for augmentation, our intention is to throw open debate and to provoke deep thinking about what interacting with and creating an augmented reality might mean for both teacher and learner.

  2. ACTINOMYCIN D ANALOGUES

    DEFF Research Database (Denmark)

    1997-01-01

    The present invention relates to new compounds being structurally and functionally similar to Actinomycin D and to combinatorial libraries of such compounds. The Actinomycin D analogues according to the present invention comprise two linear or cyclic peptide moieties constituted by $g...

  3. Cobalamin analogues in humans

    DEFF Research Database (Denmark)

    Hardlei, Tore Forsingdal; Obeid, Rima; Herrmann, Wolfgang;

    2013-01-01

    BACKGROUND: Haptocorrin (HC) carries cobalamin analogues (CorA), but whether CorA are produced in the body is unknown. All cobalamins (Cbl) to the foetus are delivered by the Cbl-specific protein transcobalamin (TC), and therefore analysis of cord serum for CorA may help to clarify the origin of ...

  4. NATURAL ANALOGUE SYNTHESIS REPORT

    International Nuclear Information System (INIS)

    The purpose of this report is to present analogue studies and literature reviews designed to provide qualitative and quantitative information to test and provide added confidence in process models abstracted for performance assessment (PA) and model predictions pertinent to PA. This report provides updates to studies presented in the Yucca Mountain Site Description (CRWMS M and O 2000 [151945], Section 13) and new examples gleaned from the literature along with results of quantitative studies conducted specifically for the Yucca Mountain Project (YMP). The intent of the natural analogue studies was to collect corroborative evidence from analogues to demonstrate additional understanding of processes expected to occur during postclosure at a potential Yucca Mountain repository. The report focuses on key processes by providing observations and analyses of natural and anthropogenic (human-induced) systems to improve understanding and confidence in the operation of these processes under conditions similar to those that could occur in a nuclear waste repository. The process models include those that represent both engineered and natural barrier processes. A second purpose of this report is to document the various applications of natural analogues to geologic repository programs, focusing primarily on the way analogues have been used by the YMP. This report is limited to providing support for PA in a confirmatory manner and to providing corroborative inputs for process modeling activities. Section 1.7 discusses additional limitations of this report. Key topics for this report are analogues to emplacement-drift degradation, waste-form degradation, waste-package degradation, degradation of other materials proposed for the engineered barrier, seepage into drifts, radionuclide flow and transport in the unsaturated zone (UZ), analogues to coupled thermal-hydrologic-mechanical-chemical processes, saturated-zone (SZ) transport, impact of radionuclide release on the biosphere

  5. Augmenting computer networks

    Science.gov (United States)

    Bokhari, S. H.; Raza, A. D.

    1984-01-01

    Three methods of augmenting computer networks by adding at most one link per processor are discussed: (1) A tree of N nodes may be augmented such that the resulting graph has diameter no greater than 4log sub 2((N+2)/3)-2. Thi O(N(3)) algorithm can be applied to any spanning tree of a connected graph to reduce the diameter of that graph to O(log N); (2) Given a binary tree T and a chain C of N nodes each, C may be augmented to produce C so that T is a subgraph of C. This algorithm is O(N) and may be used to produce augmented chains or rings that have diameter no greater than 2log sub 2((N+2)/3) and are planar; (3) Any rectangular two-dimensional 4 (8) nearest neighbor array of size N = 2(k) may be augmented so that it can emulate a single step shuffle-exchange network of size N/2 in 3(t) time steps.

  6. CEC natural analogue working group

    International Nuclear Information System (INIS)

    The second meeting of the CEC Natural Analogue Working Group took place on June 17-19, 1986, hosted by the Swiss NAGRA in Interlaken (CH). A review of recent progress in natural analogue programmes was carried out, and complemented by detailed discussions about geomicrobiology, archaeological analogues, natural colloids, and use of analogues to increase confidence in safety assessments for radioactive waste disposal. A statement drafted by the Group, and the presentations made, are put together in this report

  7. Everything Augmented: On the Real in Augmented Reality

    Directory of Open Access Journals (Sweden)

    Hanna Schraffenberger

    2014-12-01

    Full Text Available What is augmented in Augmented Reality (AR? In this paper, we review existing opinions and show how little consensus exists on this matter. Subsequently, we approach the question from a theoretical and technology-independent perspective. We identify spatial and content-based relationships between the virtual and the real as being decisive for AR and come to the conclusion that virtual content augments that to which it relates. Subsequently, we categorize different forms of AR based on what is augmented. We distinguish between augmented environments, augmented objects, augmented humans and augmented content and consider the possibility of augmented perception. The categories are illustrated with AR (art works and conceptual differences between them are pointed out. Moreover, we discuss what the real contributes to AR and how it can shape (future AR experiences. A summary of our findings and suggestions for future research and practice, such as research into multimodal and crossmodal AR, conclude the paper.

  8. CEC Natural Analogue Working Group

    International Nuclear Information System (INIS)

    The central theme for the third meeting of the CEC analogue working group was ''How can analogue data be used for performance assessments, both in support of the results and for presentation to the public''. This report puts together the most recent achievements in this field, together with a review of on-going natural analogue programmes

  9. Augmented marked graphs

    CERN Document Server

    Cheung, King Sing

    2014-01-01

    Petri nets are a formal and theoretically rich model for the modelling and analysis of systems. A subclass of Petri nets, augmented marked graphs possess a structure that is especially desirable for the modelling and analysis of systems with concurrent processes and shared resources.This monograph consists of three parts: Part I provides the conceptual background for readers who have no prior knowledge on Petri nets; Part II elaborates the theory of augmented marked graphs; finally, Part III discusses the application to system integration. The book is suitable as a first self-contained volume

  10. Augmented reality som wearable

    DEFF Research Database (Denmark)

    Buhl, Mie; Rahn, Annette

    2015-01-01

    Artiklen omhandler design og implementering af Augmented Reality (AR) i form af en wearable i sygeplejerskeuddannelsens anatomiundervisning, mere specifikt undervisning i lungeanatomi og respiration, med fokus på potentialer for visuel læring. Projektet undersøger, hvordan en udviklet AR-applikat......Artiklen omhandler design og implementering af Augmented Reality (AR) i form af en wearable i sygeplejerskeuddannelsens anatomiundervisning, mere specifikt undervisning i lungeanatomi og respiration, med fokus på potentialer for visuel læring. Projektet undersøger, hvordan en udviklet AR...

  11. Prototyping Augmented Reality

    CERN Document Server

    Mullen, Tony

    2011-01-01

    Learn to create augmented reality apps using Processing open-source programming language Augmented reality (AR) is used all over, and you may not even realize it. Smartphones overlay data onto live camera views to show homes for sale, restaurants, or historical sites. American football broadcasts use AR to show the invisible first-down line on the field to TV viewers. Nike and Budweiser, among others, have used AR in ads. Now, you can learn to create AR prototypes using 3D data, Processing open-source programming language, and other languages. This unique book is an easy-to-follow guide on how

  12. Gastric inhibitory polypeptide analogues

    DEFF Research Database (Denmark)

    Holst, Jens Juul

    2002-01-01

    of GIP and GLP-1 receptors, the incretin effect is essential for normal glucose tolerance. In patients with type 2 diabetes mellitus it turns out that the incretin effect is severely impaired or abolished. The explanation seems to be that both the secretion of GLP-1 and the effect of GIP are impaired...... (whereas both the secretion of GIP and the effect of GLP-1 are near normal). The impaired GLP-1 secretion is probably a consequence of diabetic metabolic disturbances. The known genetic variations in the GIP receptor sequence are not associated with type 2 diabetes mellitus, but a defective insulinotropic...... and its analogues are attractive as therapeutic agents for type 2 diabetes mellitus, analogues of GIP are unlikely to be effective. On the other hand, GIP seems to play an important role in lipid metabolism, promoting the disposal of ingested lipids, and mice with a targeted deletion of the GIP receptor...

  13. Natural analogue working group

    International Nuclear Information System (INIS)

    A Natural Analogue Working Group was established by the Commission of the European Communities in 1985. The purpose of this group is to bring together modellers with earth scientists and others, so that maximum benefit can be obtained from natural analogue studies with a view to safe geological disposal of radioactive waste. The first meeting of this group was held in Brussels from November 5 to 7, 1985. The discussions mainly concerned the identification of the modellers' needs and of the earth scientists' capacity to provide for them. Following the debates, a written statement was produced by the Group; this document forms the core of the present Report. Notes and outlines of many of the presentations made are grouped in four appendixes. The valuable contribution of all those involved in the meeting is gratefully acknowledged

  14. Collaborative augmented reality environments

    DEFF Research Database (Denmark)

    Büscher, Monika; Christensen, Michael; Grønbæk, Kaj;

    2000-01-01

    This paper describes Manufaktur, a prototype of a concept and infrastructure that goes beyond the classical CVE systems toward a collaborative augmented reality environment, where users? documents and objects appear as live representations in a 3D workspace. Manufaktur supports collaborative...

  15. Augmented Reality og kulturarv

    DEFF Research Database (Denmark)

    Nielsen, Mikkel Kirkedahl Lysholm

    2013-01-01

    Museerne står overfor at skulle omfavne den digitale kultur i håndteringen af den store mængde viden, institutionerne repræsenterer. Augmented Reality-systemer forbinder ved hjælp af moderne teknologi det virtuelle med det virkelige, og kan derfor synes som en oplagt anvendelsesmulighed i...

  16. Augmented reality som wearable

    DEFF Research Database (Denmark)

    Buhl, Mie; Rahn, Annette

    2015-01-01

    Artiklen omhandler design og implementering af Augmented Reality (AR) i form af en wearable i sygeplejerskeuddannelsens anatomiundervisning, mere specifikt undervisning i lungeanatomi og respiration, med fokus på potentialer for visuel læring. Projektet undersøger, hvordan en udviklet AR...

  17. Collaboration in Augmented Reality

    NARCIS (Netherlands)

    Lukosch, S.; Billinghurst, M.; Alem, L.; Kiyokawa, K.

    2015-01-01

    Augmented Reality (AR) is a technology that allows users to view and interact in real time with virtual images seamlessly superimposed over the real world. AR systems can be used to create unique collaborative experiences. For example, co-located users can see shared 3D virtual objects that they int

  18. The Palmottu analogue project

    International Nuclear Information System (INIS)

    The report gives a summary of the results of investigations carried out in 1992 at the Palmottu natural analogue study site, which is a small U-Th mineralization in Nummi-Pusula, southwestern Finland. Additionally, the report includes several separate articles dealing with various aspects of the Palmottu Analogue Project: (1) deep groundwater flow, (2) interpretation of hydraulic connections, (3) characterization of groundwater colloids, (4) uranium mineral-groundwater equilibrium, (5) water-rock interaction and (6) modelling of in situ matrix diffusion. The Palmottu Analogue Project aims at a more profound understanding of radionuclide transport processes in fractured crystalline bedrock. The essential factors controlling transport are groundwater flow and interaction between water and rock. Accordingly, the study includes (1) structural interpretations partly based on geophysical measurements, (2) hydrological studies including hydraulic drill-hole measurements, (3) flow modelling, (4) hydrogeochemical characterization of groundwater, uranium chemistry and colloid chemistry, (5) mineralogical studies, (6) geochemical interpretation and modelling, (7) studies of radionuclide mobilization and retardation including matrix diffusion, and (8) modelling of uranium series data. Palaeohydrogeological aspects, due to the anticipated future glaciation of the Fennoscandian Shield, are of special interest. Quaternary sediments are studied to gain information on post-glacial migration in the overburden. (orig.)

  19. Quantum analogue computing.

    Science.gov (United States)

    Kendon, Vivien M; Nemoto, Kae; Munro, William J

    2010-08-13

    We briefly review what a quantum computer is, what it promises to do for us and why it is so hard to build one. Among the first applications anticipated to bear fruit is the quantum simulation of quantum systems. While most quantum computation is an extension of classical digital computation, quantum simulation differs fundamentally in how the data are encoded in the quantum computer. To perform a quantum simulation, the Hilbert space of the system to be simulated is mapped directly onto the Hilbert space of the (logical) qubits in the quantum computer. This type of direct correspondence is how data are encoded in a classical analogue computer. There is no binary encoding, and increasing precision becomes exponentially costly: an extra bit of precision doubles the size of the computer. This has important consequences for both the precision and error-correction requirements of quantum simulation, and significant open questions remain about its practicality. It also means that the quantum version of analogue computers, continuous-variable quantum computers, becomes an equally efficient architecture for quantum simulation. Lessons from past use of classical analogue computers can help us to build better quantum simulators in future.

  20. AR DOC: Augmented reality documentaries

    DEFF Research Database (Denmark)

    Vistisen, Peter

    2014-01-01

    Augmented Reality Documentaries (AR DOC) er et ’lille’ Shareplay projekt (ansøgte midler augmented reality cross media løsninger, til at skabe engagerende publikumsformidling...... indenfor oplevelsesindustrien. Projektet har genereret ny viden omkring, hvordan fysisk og digital formidling kan understøttes via Augmented Reality som formidlingsformat....

  1. Simple Implant Augmentation Rhinoplasty.

    Science.gov (United States)

    Nguyen, Anh H; Bartlett, Erica L; Kania, Katarzyna; Bae, Sang Mo

    2015-11-01

    Augmentation rhinoplasty among Asian patients is often performed to improve the height of the nasal dorsum. As the use of autogenous tissues poses certain limitations, alloplastic materials are a viable alternative with a long history of use in Asia. The superiority of one implant prosthesis over another for augmentation rhinoplasty is a matter of debate, with each material representing varying strengths and weaknesses, indications for use, and precautions to consider in nasal implant placement. An implant prosthesis should be used on a case-by-case basis. Augmentation rhinoplasty requires the consideration of specific anatomical preoperative factors, including the external nose, nasal length, nasofrontal angle, humps, and facial proportions. It is equally important to consider several operative guidelines to appropriately shape implants to minimize the occurrence of adverse effects and postoperative complications. The most common postoperative complications include infection, nasal height change, movement of implant prosthesis, and silicone implant protrusion. In addition, the surgeon should consider the current standards of Asian beauty aesthetics to better understand the patient's desired outcome. PMID:26648804

  2. Radiolabeled somatostatin analogues

    International Nuclear Information System (INIS)

    Somatostatin is a naturally occurring tetradecapeptide that inhibits the secretion of many hormones. Large numbers of binding sites with high affinity for somatostatin have been reported in a variety of tumors. An octapeptide analogue of somatostatin, octreotide (Sandostatin), is currently used in the treatment of patients with somatostatin receptor-positive tumors to limit hormonal hyper secretion. In an effort to utilize the high specificity of octreotide for scintigraphic imaging of somatostatin receptor-positive tumors, a tyrosine derivative of octreotide was prepared and labeled with the radioactive isotope, I-123. While the early clinical results obtained with this radiopharmaceutical were encouraging, the I-123 labeling procedure proved cumbersome and variable. To circumvent these difficulties, researchers at University Hospital Rotterdam (Holland) and Sandoz Research Institute (Switzerland) developed an In-111 labeled analogue of octreotide. This radiopharmaceutical is easy to prepare and has proven to be even more effective than the I-123 derivative in the scintigraphic imaging of tumors. These radiopharmaceutical developments and clinical observations are discussed in light of their relevance to the generation of new radiolabeled peptides for the diagnosis and potential radiotherapy of cancer. (authors). 30 refs., 5 figs

  3. Augmenting Clozapine With Sertindole

    DEFF Research Database (Denmark)

    Nielsen, Jimmi; Emborg, Charlotte; Gydesen, Susanne;

    2012-01-01

    randomized 1:1 to either sertindole 16 mg or placebo, and assessment was done at baseline and after 6 and 12 weeks. Assessment included the Positive and Negative Syndrome Scale, Clinical Global Impression, Udvalg for Kliniske Undersøgelser, World Health Organization Quality of Life Brief, Drug Attitude...... Inventory, fasting glucose, lipids, and electrocardiogram. Clozapine augmentation with sertindole was not superior to placebo regarding total score or subscale score of the Positive and Negative Syndrome Scale, Clinical Global Impression, World Health Organization Quality of Life Brief, or Drug Attitude...

  4. Neurally augmented sexual function.

    Science.gov (United States)

    Meloy, S

    2007-01-01

    Neurally Augmented Sexual Function (NASF) is a technique utilizing epidural electrodes to restore and improve sexual function. Orgasmic dysfunction is common in adult women, affecting roughly one quarter of populations studied. Many male patients suffering from erectile dysfunction are not candidates for phosphdiesterase therapy due to concomitant nitrate therapy. Positioning the electrodes at roughly the level of the cauda equina allows for stimulation of somatic efferents and afferents as well as modifying sympathetic and parasympathetic activity. Our series of women treated by NASF is described. Our experience shows that the evaluation of potential candidates for both correctable causes and psychological screening are important considerations. PMID:17691397

  5. A Short Term Analogue Memory

    DEFF Research Database (Denmark)

    Shah, Peter Jivan

    1992-01-01

    A short term analogue memory is described. It is based on a well-known sample-hold topology in which leakage currents have been minimized partly by circuit design and partly by layout techniques. Measurements on a test chip implemented in a standard 2.4 micron analogue CMOS process show a droop...

  6. Vorticity in analogue gravity

    CERN Document Server

    Cropp, Bethan; Turcati, Rodrigo

    2015-01-01

    In the analogue gravity framework, the acoustic disturbances in a moving fluid can be described by an equation of motion identical to a relativistic scalar massless field propagating in a curved spacetime. This description is possible only when the fluid under consideration is barotropic, inviscid and irrotational. In this case, the propagation of the perturbations is governed by an acoustic metric which depends algebrically on the local speed of sound, density and the background flow velocity, the latter assumed to be vorticity free. In this work we provide an straightforward extension in order to go beyond the irrotational constraint. Using a charged --- relativistic and non-relativistic --- Bose--Einstein condensate as a physical system, we show that in the low momentum limit and performing the eikonal approximation we can derive a d'Alembertian equation of motion for the charged phonons where the emergent acoustic metric depends on a flow velocity in the presence of vorticity.

  7. Alligator Rivers analogue project

    International Nuclear Information System (INIS)

    Australian Nuclear Science and Technology Organization has extensively evaluated uranium ore bodies in the Alligator Rivers Uranium Province in Australia as analogues of radioactive waste repositories. The work was extended for a three-year program as an international project based on the Koongarra uranium deposit and sponsored by the OECD Nuclear Energy Agency. The technical program comprises six major sub-projects involving modelling and experimental work: modelling of radionuclide migration; hydrogeology of the Koongarra uranium deposit; uranium/thorium series disequilibria studies; groundwater and colloid studies; fission product studies; transuranic nuclide studies; an outline of the technical programs and a summary of progress in the technical sub-projects is given. This is followed by a series of technical reports which briefly describe current research tasks, and which have been separately indexed

  8. AUGMENTATION-RELATED BRAIN PLASTICITY

    OpenAIRE

    Giovanni eDi Pino; Angelo eMaravita; Loredana eZollo; Eugenio eGuglielmelli; Vincenzo eDi Lazzaro

    2014-01-01

    Today, the anthropomorphism of the tools and the development of neural interfaces require reconsidering the concept of human-tools interaction in the framework of human augmentation. This review analyzes the plastic process that the brain undergoes when it comes into contact with augmenting artificial sensors and effectors and, on the other hand, the changes that the use of external augmenting devices produces in the brain.Hitherto, few studies investigated the neural correlates of augmentati...

  9. Augmentation-related brain plasticity

    OpenAIRE

    Di Pino, Giovanni; Maravita, Angelo; Zollo, Loredana; Guglielmelli, Eugenio; Di Lazzaro, Vincenzo

    2014-01-01

    Today, the anthropomorphism of the tools and the development of neural interfaces require reconsidering the concept of human-tools interaction in the framework of human augmentation. This review analyses the plastic process that the brain undergoes when it comes into contact with augmenting artificial sensors and effectors and, on the other hand, the changes that the use of external augmenting devices produces in the brain. Hitherto, few studies investigated the neural correlates of augmentat...

  10. Augmented Reality for Science Education

    DEFF Research Database (Denmark)

    Brandt, Harald; Nielsen, Birgitte Lund; Georgsen, Marianne;

    Augmented reality (AR) holds great promise as a learning tool. So far, however, most research has looked at the technology itself – and AR has been used primarily for commercial purposes. As a learning tool, AR supports an inquiry-based approach to science education with a high level of student...... involvement. The AR-sci-project (Augmented Reality for SCIence education) addresses the issue of applying augmented reality in developing innovative science education and enhancing the quality of science teaching and learning....

  11. Augmented Sustainability Measures for Scotland

    OpenAIRE

    John C. V. Pezzey; Nick Hanley; Karen Turner; Dugald Tinch

    2003-01-01

    We estimate and compare two empirical measures of the weak sustainability of an economy for the first time: the change in augmented green net national product (GNNP), and the interest on augmented genuine savings (GS). Yearly calculations are given for each measure for Scotland during 1992-99. Augmentation means including, using projections to 2020, production possibilities enabled by exogenous technical progress or changing terms of trade. In passing, we clarify the treatment of environmenta...

  12. Crime Scenes as Augmented Reality

    DEFF Research Database (Denmark)

    Sandvik, Kjetil

    2010-01-01

    Using the concept of augmented reality, this article will investigate how places in various ways have become augmented by means of different mediatization strategies. Augmentation of reality implies an enhancement of the places' emotional character: a certain mood, atmosphere or narrative surplus......, physical damage: they are all readable and interpretable signs. As augmented reality the crime scene carries a narrative which at first is hidden and must be revealed. Due to the process of investigation and the detective's ability to reason and deduce, the crime scene as place is reconstructed as virtual...

  13. Augmented reality system

    Science.gov (United States)

    Lin, Chien-Liang; Su, Yu-Zheng; Hung, Min-Wei; Huang, Kuo-Cheng

    2010-08-01

    In recent years, Augmented Reality (AR)[1][2][3] is very popular in universities and research organizations. The AR technology has been widely used in Virtual Reality (VR) fields, such as sophisticated weapons, flight vehicle development, data model visualization, virtual training, entertainment and arts. AR has characteristics to enhance the display output as a real environment with specific user interactive functions or specific object recognitions. It can be use in medical treatment, anatomy training, precision instrument casting, warplane guidance, engineering and distance robot control. AR has a lot of vantages than VR. This system developed combines sensors, software and imaging algorithms to make users feel real, actual and existing. Imaging algorithms include gray level method, image binarization method, and white balance method in order to make accurate image recognition and overcome the effects of light.

  14. Augmented Virtual Reality Laboratory

    Science.gov (United States)

    Tully-Hanson, Benjamin

    2015-01-01

    Real time motion tracking hardware has for the most part been cost prohibitive for research to regularly take place until recently. With the release of the Microsoft Kinect in November 2010, researchers now have access to a device that for a few hundred dollars is capable of providing redgreenblue (RGB), depth, and skeleton data. It is also capable of tracking multiple people in real time. For its original intended purposes, i.e. gaming, being used with the Xbox 360 and eventually Xbox One, it performs quite well. However, researchers soon found that although the sensor is versatile, it has limitations in real world applications. I was brought aboard this summer by William Little in the Augmented Virtual Reality (AVR) Lab at Kennedy Space Center to find solutions to these limitations.

  15. NAESA Augmentation Pilot Project

    Science.gov (United States)

    Hoover, John J.

    1998-01-01

    This project was one project within the Native American Earth and Space Academy (NAESA). NAESA is a national initiative comprised of several organizations that support programs which focus on 1) enhancing the technological, scientific and pedagogical skills of K-14 teachers who instruct Native Americans, 2) enhancing the understanding and applications of science, technology, and engineering of college-bound Native Americans and teaching them general college "survival skills" (e.g., test taking, time management, study habits), 3) enhancing the scientific and pedagogical skills of the faculty of tribally-controllcd colleges and community colleges with large Native American enrollments, and 4) strengthening the critical relationships between students, their parents, tribal elders, and their communities. This Augmentation Pilot Project focused on the areas of community-school alliances and intemet technology use in teaching and learning and daily living addressing five major objectives.

  16. NASA Communications Augmentation network

    Science.gov (United States)

    Omidyar, Guy C.; Butler, Thomas E.; Laios, Straton C.

    1990-09-01

    The NASA Communications (Nascom) Division of the Mission Operations and Data Systems Directorate (MO&DSD) is to undertake a major initiative to develop the Nascom Augmentation (NAUG) network to achieve its long-range service objectives for operational data transport to support the Space Station Freedom Program, the Earth Observing System (EOS), and other projects. The NAUG is the Nascom ground communications network being developed to accommodate the operational traffic of the mid-1990s and beyond. The NAUG network development will be based on the Open Systems Interconnection Reference Model (OSI-RM). This paper describes the NAUG network architecture, subsystems, topology, and services; addresses issues of internetworking the Nascom network with other elements of the Space Station Information System (SSIS); discusses the operations environment. This paper also notes the areas of related research and presents the current conception of how the network will provide broadband services in 1998.

  17. Magnetohydrodynamic Augmented Propulsion Experiment

    Science.gov (United States)

    Litchford, Ron J.

    2008-01-01

    Over the past several years, efforts have been under way to design and develop an operationally flexible research facility for investigating the use of cross-field MHD accelerators as a potential thrust augmentation device for thermal propulsion systems. The baseline configuration for this high-power experimental facility utilizes a 1.5-MWe multi-gas arc-heater as a thermal driver for a 2-MWe MHD accelerator, which resides in a large-bore 2-tesla electromagnet. A preliminary design study using NaK seeded nitrogen as the working fluid led to an externally diagonalized segmented MHD channel configuration based on an expendable heat-sink design concept. The current status report includes a review of engineering/design work and performance optimization analyses and summarizes component hardware fabrication and development efforts, preliminary testing results, and recent progress toward full-up assembly and testing

  18. Augmented Reality Comes to Physics

    Science.gov (United States)

    Buesing, Mark; Cook, Michael

    2013-01-01

    Augmented reality (AR) is a technology used on computing devices where processor-generated graphics are rendered over real objects to enhance the sensory experience in real time. In other words, what you are really seeing is augmented by the computer. Many AR games already exist for systems such as Kinect and Nintendo 3DS and mobile apps, such as…

  19. Adapting Information Through Tangible Augmented Reality Interfaces

    OpenAIRE

    Sinclair, Patrick; Martinez, Kirk

    2004-01-01

    Tangible augmented reality interfaces offer a hands on approach for examining objects and exploring the associated information. We describe two tangible augmented reality interfaces that can expose the adaptation of information presented to users about objects in augmented reality environments.

  20. Control Augmented Structural Synthesis

    Science.gov (United States)

    Lust, Robert V.; Schmit, Lucien A.

    1988-01-01

    A methodology for control augmented structural synthesis is proposed for a class of structures which can be modeled as an assemblage of frame and/or truss elements. It is assumed that both the plant (structure) and the active control system dynamics can be adequately represented with a linear model. The structural sizing variables, active control system feedback gains and nonstructural lumped masses are treated simultaneously as independent design variables. Design constraints are imposed on static and dynamic displacements, static stresses, actuator forces and natural frequencies to ensure acceptable system behavior. Multiple static and dynamic loading conditions are considered. Side constraints imposed on the design variables protect against the generation of unrealizable designs. While the proposed approach is fundamentally more general, here the methodology is developed and demonstrated for the case where: (1) the dynamic loading is harmonic and thus the steady state response is of primary interest; (2) direct output feedback is used for the control system model; and (3) the actuators and sensors are collocated.

  1. Augmented Likelihood Image Reconstruction.

    Science.gov (United States)

    Stille, Maik; Kleine, Matthias; Hägele, Julian; Barkhausen, Jörg; Buzug, Thorsten M

    2016-01-01

    The presence of high-density objects remains an open problem in medical CT imaging. Data of projections passing through objects of high density, such as metal implants, are dominated by noise and are highly affected by beam hardening and scatter. Reconstructed images become less diagnostically conclusive because of pronounced artifacts that manifest as dark and bright streaks. A new reconstruction algorithm is proposed with the aim to reduce these artifacts by incorporating information about shape and known attenuation coefficients of a metal implant. Image reconstruction is considered as a variational optimization problem. The afore-mentioned prior knowledge is introduced in terms of equality constraints. An augmented Lagrangian approach is adapted in order to minimize the associated log-likelihood function for transmission CT. During iterations, temporally appearing artifacts are reduced with a bilateral filter and new projection values are calculated, which are used later on for the reconstruction. A detailed evaluation in cooperation with radiologists is performed on software and hardware phantoms, as well as on clinically relevant patient data of subjects with various metal implants. Results show that the proposed reconstruction algorithm is able to outperform contemporary metal artifact reduction methods such as normalized metal artifact reduction.

  2. Zion Augmented Reality Application (ZARA): An Augmented Heritage Prototype

    OpenAIRE

    Odland, Johannes Johannesen

    2007-01-01

    This paper describes the investigation and development of a virtual heritage application that employs augmented reality to disseminate a model of the Zion castle. The developed system is a flexible prototype that leverages several open source frameworks and applications.

  3. Augmented Reality Comes to Physics

    Science.gov (United States)

    Buesing, Mark; Cook, Michael

    2013-04-01

    Augmented reality (AR) is a technology used on computing devices where processor-generated graphics are rendered over real objects to enhance the sensory experience in real time. In other words, what you are really seeing is augmented by the computer. Many AR games already exist for systems such as Kinect and Nintendo 3DS and mobile apps, such as Tagwhat and Star Chart (a must for astronomy class). The yellow line marking first downs in a televised football game2 and the enhanced puck that makes televised hockey easier to follow3 both use augmented reality to do the job.

  4. Augmented Reality for Science Education

    DEFF Research Database (Denmark)

    Brandt, Harald; Nielsen, Birgitte Lund; Georgsen, Marianne;

    2015-01-01

    Augmented reality (AR) holds great promise as a learning tool. So far, however, most research has looked at the technology itself – and AR has been used primarily for commercial purposes. As a learning tool, AR supports an inquiry-based approach to science education with a high level of student i...... involvement. The AR-sci-project (Augmented Reality for SCIence education) addresses the issue of applying augmented reality in developing innovative science education and enhancing the quality of science teaching and learning....

  5. Understanding augmented reality concepts and applications

    CERN Document Server

    Craig, Alan B

    2013-01-01

    Augmented reality is not a technology. Augmented reality is a medium. Likewise, a book on augmented reality that only addresses the technology that is required to support the medium of augmented reality falls far short of providing the background that is needed to produce, or critically consume augmented reality applications. One reads a book. One watches a movie. One experiences augmented reality. Understanding Augmented Reality addresses the elements that are required to create compelling augmented reality experiences. The technology that supports

  6. Augmenter of liver regeneration

    Directory of Open Access Journals (Sweden)

    Gandhi Chandrashekhar R

    2012-07-01

    Full Text Available Abstract ‘Augmenter of liver regeneration’ (ALR (also known as hepatic stimulatory substance or hepatopoietin was originally found to promote growth of hepatocytes in the regenerating or injured liver. ALR is expressed ubiquitously in all organs, and exclusively in hepatocytes in the liver. ALR, a survival factor for hepatocytes, exhibits significant homology with ERV1 (essential for respiration and viability protein that is essential for the survival of the yeast, Saccharomyces cerevisiae. ALR comprises 198 to 205 amino acids (approximately 22 kDa, but is post-translationally modified to three high molecular weight species (approximately 38 to 42 kDa found in hepatocytes. ALR is present in mitochondria, cytosol, endoplasmic reticulum, and nucleus. Mitochondrial ALR may be involved in oxidative phosphorylation, but also functions as sulfhydryl oxidase and cytochrome c reductase, and causes Fe/S maturation of proteins. ALR, secreted by hepatocytes, stimulates synthesis of TNF-α, IL-6, and nitric oxide in Kupffer cells via a G-protein coupled receptor. While the 22 kDa rat recombinant ALR does not stimulate DNA synthesis in hepatocytes, the short form (15 kDa of human recombinant ALR was reported to be equipotent as or even stronger than TGF-α or HGF as a mitogen for hepatocytes. Altered serum ALR levels in certain pathological conditions suggest that it may be a diagnostic marker for liver injury/disease. Although ALR appears to have multiple functions, the knowledge of its role in various organs, including the liver, is extremely inadequate, and it is not known whether different ALR species have distinct functions. Future research should provide better understanding of the expression and functions of this enigmatic molecule.

  7. Amphetamine-Like Analogues in Diabetes: Speeding towards Ketogenesis

    Directory of Open Access Journals (Sweden)

    Natalia M. Branis

    2015-01-01

    Full Text Available Obesity is common in patients with type 1 and type 2 diabetes. Amphetamine-like analogues comprise the most popular class of weight loss medications. We present a case of a 34-year-old African American female with a history of type 1 diabetes, dyslipidemia, and obesity who developed diabetic ketoacidosis (DKA after starting Diethylpropion for the purpose of weight loss. Shortly after starting Diethylpropion, she developed nausea, vomiting, and periumbilical pain. Blood work revealed glucose of 718 mg/dL, pH 7.32 (7.35–7.45, bicarbonate 16 mmol/L (22–29 mmol/L, and anion gap 19 mmol/L (8–16 mmol/L. Urine analysis demonstrated large amount of ketones. She was hospitalized and successfully treated for DKA. Diethylpropion was discontinued. Amphetamine-like analogues administration leads to norepinephrine release from the lateral hypothalamus which results in the appetite suppression. Peripheral norepinephrine concentration rises as well. Norepinephrine stimulates adipocyte lipolysis and thereby increases nonesterified fatty acids (NEFA availability. It promotes β-oxidation of NEFA to ketone bodies while decreasing metabolic clearance rate of ketones. In the setting of acute insulin deficiency these effects are augmented. Females are more sensitive to norepinephrine effects compared to males. In conclusion, amphetamine-like analogues lead to a release of norepinephrine which can result in a clinically significant ketosis, especially in the setting of insulin deficiency.

  8. Mersiline mesh in premaxillary augmentation.

    Science.gov (United States)

    Foda, Hossam M T

    2005-01-01

    Premaxillary retrusion may distort the aesthetic appearance of the columella, lip, and nasal tip. This defect is characteristically seen in, but not limited to, patients with cleft lip nasal deformity. This study investigated 60 patients presenting with premaxillary deficiencies in which Mersiline mesh was used to augment the premaxilla. All the cases had surgery using the external rhinoplasty technique. Two methods of augmentation with Mersiline mesh were used: the Mersiline roll technique, for the cases with central symmetric deficiencies, and the Mersiline packing technique, for the cases with asymmetric deficiencies. Premaxillary augmentation with Mersiline mesh proved to be simple technically, easy to perform, and not associated with any complications. Periodic follow-up evaluation for a mean period of 32 months (range, 12-98 months) showed that an adequate degree of premaxillary augmentation was maintained with no clinically detectable resorption of the mesh implant. PMID:15959688

  9. Pure Laparoscopic Augmentation Ileocystoplasty

    Directory of Open Access Journals (Sweden)

    Rafael B. Rebouças

    2014-12-01

    Full Text Available Introduction Guillain-Barre syndrome is an acute neuropathy that rarely compromises bladder function. Conservative management including clean intermittent catheterization and pharmacotherapy is the primary approach for hypocompliant contracted bladder. Surgical treatment may be used in refractory cases to improve bladder compliance and capacity in order to protect the upper urinary tract. We describe a case of pure laparoscopic augmentation ileocystoplasty in a patient affected by Guillain-Barre syndrome. Presentation A 15-year-old female, complaining of voiding dysfunction, recurrent urinary tract infection and worsening renal function for three months. A previous history of Guillain-Barre syndrome on childhood was related. A voiding cystourethrography showed a pine-cone bladder with moderate post-void residual urine. The urodynamic demonstrated a hypocompliant bladder and small bladder capacity (190mL with high detrusor pressure (54 cmH2O. Nonsurgical treatments were attempted, however unsuccessfully. The patient was placed in the exaggerated Trendelenburg position. A four-port transperitoneal technique was used. A segment of ileum approximately 15-20cm was selected and divided with its pedicle. The ileal anastomosis and creation of ileal U-shaped plate were performed laparoscopically, without staplers. Bladder mobilization and longidutinal cystotomy were performed. Enterovesical anastomosis was done with continuous running suture. A suprapubic cystostomy was placed through a 5mm trocar. Results The total operative time was 335 min. The blood loss was minimal. The patient developed ileus in the early days, diet acceptance after the fourth day and was discharged on the seventh postoperative day. The urethral catheter was removed after 2 weeks. At 6-month follow-up, a cystogram showed a significant improvement in bladder capacity. The patient adhered well to clean intermittent self-catheterization and there was no report for febrile infections

  10. Introduction to electronic analogue computers

    CERN Document Server

    Wass, C A A

    1965-01-01

    Introduction to Electronic Analogue Computers, Second Revised Edition is based on the ideas and experience of a group of workers at the Royal Aircraft Establishment, Farnborough, Hants. This edition is almost entirely the work of Mr. K. C. Garner, of the College of Aeronautics, Cranfield. As various advances have been made in the technology involving electronic analogue computers, this book presents discussions on the said progress, including some acquaintance with the capabilities of electronic circuits and equipment. This text also provides a mathematical background including simple differen

  11. Novel acetylcholine and carbamoylcholine analogues

    DEFF Research Database (Denmark)

    Hansen, Camilla Petrycer; Jensen, Anders Asbjørn; Christensen, Jeppe K.;

    2008-01-01

    A series of carbamoylcholine and acetylcholine analogues were synthesized and characterized pharmacologically at neuronal nicotinic acetylcholine receptors (nAChRs). Several of the compounds displayed low nanomolar binding affinities to the alpha 4beta 2 nAChR and pronounced selectivity...

  12. Augmented Reality Tower Technology Assessment

    Science.gov (United States)

    Reisman, Ronald J.; Brown, David M.

    2009-01-01

    Augmented Reality technology may help improve Air Traffic Control Tower efficiency and safety during low-visibility conditions. This paper presents the assessments of five off-duty controllers who shadow-controlled' with an augmented reality prototype in their own facility. Initial studies indicated unanimous agreement that this technology is potentially beneficial, though the prototype used in the study was not adequate for operational use. Some controllers agreed that augmented reality technology improved situational awareness, had potential to benefit clearance, control, and coordination tasks and duties and could be very useful for acquiring aircraft and weather information, particularly aircraft location, heading, and identification. The strongest objections to the prototype used in this study were directed at aircraft registration errors, unacceptable optical transparency, insufficient display performance in sunlight, inadequate representation of the static environment and insufficient symbology.

  13. Augmentation-related brain plasticity

    Science.gov (United States)

    Di Pino, Giovanni; Maravita, Angelo; Zollo, Loredana; Guglielmelli, Eugenio; Di Lazzaro, Vincenzo

    2014-01-01

    Today, the anthropomorphism of the tools and the development of neural interfaces require reconsidering the concept of human-tools interaction in the framework of human augmentation. This review analyses the plastic process that the brain undergoes when it comes into contact with augmenting artificial sensors and effectors and, on the other hand, the changes that the use of external augmenting devices produces in the brain. Hitherto, few studies investigated the neural correlates of augmentation, but clues on it can be borrowed from logically-related paradigms: sensorimotor training, cognitive enhancement, cross-modal plasticity, sensorimotor functional substitution, use and embodiment of tools. Augmentation modifies function and structure of a number of areas, i.e., primary sensory cortices shape their receptive fields to become sensitive to novel inputs. Motor areas adapt the neuroprosthesis representation firing-rate to refine kinematics. As for normal motor outputs, the learning process recruits motor and premotor cortices and the acquisition of proficiency decreases attentional recruitment, focuses the activity on sensorimotor areas and increases the basal ganglia drive on the cortex. Augmentation deeply relies on the frontoparietal network. In particular, premotor cortex is involved in learning the control of an external effector and owns the tool motor representation, while the intraparietal sulcus extracts its visual features. In these areas, multisensory integration neurons enlarge their receptive fields to embody supernumerary limbs. For operating an anthropomorphic neuroprosthesis, the mirror system is required to understand the meaning of the action, the cerebellum for the formation of its internal model and the insula for its interoception. In conclusion, anthropomorphic sensorized devices can provide the critical sensory afferences to evolve the exploitation of tools through their embodiment, reshaping the body representation and the sense of the self

  14. AUGMENTATION-RELATED BRAIN PLASTICITY

    Directory of Open Access Journals (Sweden)

    Giovanni eDi Pino

    2014-06-01

    Full Text Available Today, the anthropomorphism of the tools and the development of neural interfaces require reconsidering the concept of human-tools interaction in the framework of human augmentation. This review analyzes the plastic process that the brain undergoes when it comes into contact with augmenting artificial sensors and effectors and, on the other hand, the changes that the use of external augmenting devices produces in the brain.Hitherto, few studies investigated the neural correlates of augmentation, but clues on it can be borrowed from logically-related paradigms: sensorimotor training, cognitive enhancement, cross-modal plasticity, sensorimotor functional substitution, use and embodiment of tools.Augmentation modifies function and structure of a number of areas, i.e. primary sensory cortices shape their receptive fields to become sensitive to novel inputs. Motor areas adapt the neuroprosthesis representation firing-rate to refine kinematics. As for normal motor outputs, the learning process recruits motor and premotor cortices and the acquisition of proficiency decreases attentional recruitment, focuses the activity on sensorimotor areas and increases the basal ganglia drive on the cortex. Augmentation deeply relies on the frontoparietal network. In particular, premotor cortex is involved in learning the control of an external effector and owns the tool motor representation, while the intraparietal sulcus extracts its visual features. In these areas, multisensory integration neurons enlarge their receptive fields to embody supernumerary limbs. For operating an anthropomorphic neuroprosthesis, the mirror system is required to understand the meaning of the action, the cerebellum for the formation of its internal model and the insula for its interoception. In conclusion, anthropomorphic sensorized devices can provide the critical sensory afferences to evolve the exploitation of tools through their embodiment, reshaping the body representation and the

  15. Augmented Reality in Science Education

    DEFF Research Database (Denmark)

    Nielsen, Birgitte Lund; Brandt, Harald; Swensen, Hakon

    2015-01-01

    Augmented reality (AR) holds great promise as a learning tool. However, most extant studies in this field have focused on the technology itself. The poster presents findings from the first stage of the AR-sci project addressing the issue of applying AR for educational purposes. Benefits and chall......Augmented reality (AR) holds great promise as a learning tool. However, most extant studies in this field have focused on the technology itself. The poster presents findings from the first stage of the AR-sci project addressing the issue of applying AR for educational purposes. Benefits...

  16. Default Bayesian analysis for multi-way tables: a data-augmentation approach

    CERN Document Server

    Polson, Nicholas G

    2011-01-01

    This paper proposes a strategy for regularized estimation in multi-way contingency tables, which are common in meta-analyses and multi-center clinical trials. Our approach is based on data augmentation, and appeals heavily to a novel class of Polya-Gamma distributions. Our main contributions are to build up the relevant distributional theory and to demonstrate three useful features of this data-augmentation scheme. First, it leads to simple EM and Gibbs-sampling algorithms for posterior inference, circumventing the need for analytic approximations, numerical integration, Metropolis--Hastings, or variational methods. Second, it allows modelers much more flexibility when choosing priors, which have traditionally come from the Dirichlet or logistic-normal family. For example, our approach allows users to incorporate Bayesian analogues of classical penalized-likelihood techniques (e.g. the lasso or bridge) in computing regularized estimates for log-odds ratios. Finally, our data-augmentation scheme naturally sugg...

  17. Policy issues in space analogues

    Science.gov (United States)

    Auger, Robin N.; Facktor, Debra D.

    Space mission planning is increasingly focusing on destinations beyond Earth orbit. Advancements in technology will inevitably be required to enable long-duration human spaceflight missions, and breakthroughs in the policy arena will also be needed to achieve success in such missions. By exploring how policy issues have been addressed in analogous extreme environments, policymakers can develop a framework for addressing these issues as they apply to long-term human spaceflight. Policy issues that need to be addressed include: crew selection, training, organization, and activities, medical testing, illness, injury, and death; communication; legal accountability and liability; mission safety and risk management; and environmental contamination. This paper outlines the approach of a study underway by The George Washington University and ANSER to examine how these policy issues have been addressed in several analogues and how the experiences of these analogues can help formulate policies for long-duration human spaceflight missions. Analogues being studied include Antarctic bases, submarine voyages, undersea stations, Biosphere 2, and the U.S. Skylab and Russian Mir space stations.

  18. Augmented assessment as a means to augmented reality.

    Science.gov (United States)

    Bergeron, Bryan

    2006-01-01

    Rigorous scientific assessment of educational technologies typically lags behind the availability of the technologies by years because of the lack of validated instruments and benchmarks. Even when the appropriate assessment instruments are available, they may not be applied because of time and monetary constraints. Work in augmented reality, instrumented mannequins, serious gaming, and similar promising educational technologies that haven't undergone timely, rigorous evaluation, highlights the need for assessment methodologies that address the limitations of traditional approaches. The most promising augmented assessment solutions incorporate elements of rapid prototyping used in the software industry, simulation-based assessment techniques modeled after methods used in bioinformatics, and object-oriented analysis methods borrowed from object oriented programming. PMID:16404012

  19. Augmented reality and its practical application

    OpenAIRE

    ZÍTKOVÁ, Helena

    2011-01-01

    This thesis combines topic of augmented reality with tourism. For analyzing the state of the use of augmented reality was composed case studies. It was created product, which is called Guide to mobile phone.

  20. Augmented Reality for Multi-disciplinary Collaboration

    OpenAIRE

    Wang, Xiangyu; Rui

    2010-01-01

    This chapter presents a framework for multi-disciplinary collaboration. Tangible Augmented Reality has been raised as one of suitable systems for design collaboration. Furthermore, it emphasizes the advantages of Tangible Augmented Reality to illustrate the needs for integrating the Tangible User Interfaces and Augmented Reality Systems.

  1. Effective Augmentation of Complex Networks

    Science.gov (United States)

    Wang, Jinjian; Yu, Xinghuo; Stone, Lewi

    2016-05-01

    Networks science plays an enormous role in many aspects of modern society from distributing electrical power across nations to spreading information and social networking amongst global populations. While modern networks constantly change in size, few studies have sought methods for the difficult task of optimising this growth. Here we study theoretical requirements for augmenting networks by adding source or sink nodes, without requiring additional driver-nodes to accommodate the change i.e., conserving structural controllability. Our “effective augmentation” algorithm takes advantage of clusters intrinsic to the network topology, and permits rapidly and efficient augmentation of a large number of nodes in one time-step. “Effective augmentation” is shown to work successfully on a wide range of model and real networks. The method has numerous applications (e.g. study of biological, social, power and technological networks) and potentially of significant practical and economic value.

  2. Psychotherapy Augmentation through Preconscious Priming

    OpenAIRE

    Borgeat, François; O’Connor, Kieron; Amado, Danielle; St-Pierre-Delorme, Marie-Ève

    2013-01-01

    Objective: To test the hypothesis that repeated preconscious (masked) priming of personalized positive cognitions could augment cognitive change and facilitate achievement of patients’ goals following a therapy. Methods: Twenty social phobic patients (13 women) completed a 36-weeks study beginning by 12 weeks of group behavioral therapy. After the therapy, they received 6 weeks of preconscious priming and 6 weeks of a control procedure in a randomized cross-over design. The Priming conditi...

  3. Psychotherapy augmentation through preconscious priming

    OpenAIRE

    Francois eBorgeat; Kieron eO'Connor; Danielle eAmado; Marie-Eve eSt-Pierre-Delorme

    2013-01-01

    Objective: To test the hypothesis that repeated preconscious (masked) priming of personalized positive cognitions could augment cognitive change and facilitate achievement of patients’ goals following a therapy.Methods: Twenty social phobic patients (13 women) completed a 36 weeks study beginning by 12 weeks of group behavioural therapy. After the therapy, they received 6 weeks of preconscious priming and 6 weeks of a control procedure in a randomized cross-over design. The Priming condition ...

  4. Media-Augmented Exercise Machines

    Science.gov (United States)

    Krueger, T.

    2002-01-01

    Cardio-vascular exercise has been used to mitigate the muscle and cardiac atrophy associated with adaptation to micro-gravity environments. Several hours per day may be required. In confined spaces and long duration missions this kind of exercise is inevitably repetitive and rapidly becomes uninteresting. At the same time, there are pressures to accomplish as much as possible given the cost- per-hour for humans occupying orbiting or interplanetary. Media augmentation provides a the means to overlap activities in time by supplementing the exercise with social, recreational, training or collaborative activities and thereby reducing time pressures. In addition, the machine functions as an interface to a wide range of digital environments allowing for spatial variety in an otherwise confined environment. We hypothesize that the adoption of media augmented exercise machines will have a positive effect on psycho-social well-being on long duration missions. By organizing and supplementing exercise machines, data acquisition hardware, computers and displays into an interacting system this proposal increases functionality with limited additional mass. This paper reviews preliminary work on a project to augment exercise equipment in a manner that addresses these issues and at the same time opens possibilities for additional benefits. A testbed augmented exercise machine uses a specialty built cycle trainer as both input to a virtual environment and as an output device from it using spatialized sound, and visual displays, vibration transducers and variable resistance. The resulting interactivity increases a sense of engagement in the exercise, provides a rich experience of the digital environments. Activities in the virtual environment and accompanying physiological and psychological indicators may be correlated to track and evaluate the health of the crew.

  5. FUNCTION GENERATOR FOR ANALOGUE COMPUTERS

    Science.gov (United States)

    Skramstad, H.K.; Wright, J.H.; Taback, L.

    1961-12-12

    An improved analogue computer is designed which can be used to determine the final ground position of radioactive fallout particles in an atomic cloud. The computer determines the fallout pattern on the basis of known wind velocity and direction at various altitudes, and intensity of radioactivity in the mushroom cloud as a function of particle size and initial height in the cloud. The output is then displayed on a cathode-ray tube so that the average or total luminance of the tube screen at any point represents the intensity of radioactive fallout at the geographical location represented by that point. (AEC)

  6. Tracking for Outdoor Mobile Augmented Reality: Further development of the Zion Augmented Reality Application

    OpenAIRE

    Strand, Tor Egil Riegels

    2008-01-01

    This report deals with providing tracking to an outdoor mobile augmented reality system and the Zion Augmented Reality Application. ZionARA is meant to display a virtual recreation of a 13th century castle on the site it once stood through an augmented reality Head Mounted Display. Mobile outdoor augmented/mixed reality puts special demands on what kind of equipment is practical. After briefly evaluating the different existing tracking methods, a solution based on GPS and an augmented inertia...

  7. What Can We Learn From Analogue Experiments?

    CERN Document Server

    Thebault, Karim P Y

    2016-01-01

    In 1981 Unruh proposed that fluid mechanical experiments could be used to probe key aspects of the quantum phenomenology of black holes. In particular, he claimed that an analogue to Hawking radiation could be created within a fluid mechanical `dumb hole', with the event horizon replaced by a sonic horizon. Since then an entire sub-field of `analogue gravity' has been created. In 2016 Steinhauer reported the experimental observation of quantum Hawking radiation and its entanglement in a Bose-Einstein condensate analogue black hole. What can we learn from such analogue experiments? In particular, in what sense can they provide evidence of novel phenomena such as black hole Hawking radiation?

  8. The Valles natural analogue project

    Energy Technology Data Exchange (ETDEWEB)

    Stockman, H.; Krumhansl, J.; Ho, C. [Sandia National Labs., Albuquerque, NM (United States); McConnell, V. [Alaska Univ., Fairbanks, AK (United States). Geophysical Inst.

    1994-12-01

    The contact between an obsidian flow and a steep-walled tuff canyon was examined as an analogue for a highlevel waste repository. The analogue site is located in the Valles Caldera in New Mexico, where a massive obsidian flow filled a paleocanyon in the Battleship Rock tuff. The obsidian flow provided a heat source, analogous to waste panels or an igneous intrusion in a repository, and caused evaporation and migration of water. The tuff and obsidian samples were analyzed for major and trace elements and mineralogy by INAA, XRF, X-ray diffraction; and scanning electron microscopy and electron microprobe. Samples were also analyzed for D/H and {sup 39}Ar/{sup 4O} isotopic composition. Overall,the effects of the heating event seem to have been slight and limited to the tuff nearest the contact. There is some evidence of devitrification and migration of volatiles in the tuff within 10 meters of the contact, but variations in major and trace element chemistry are small and difficult to distinguish from the natural (pre-heating) variability of the rocks.

  9. Digital Illumination for Augmented Studios

    Directory of Open Access Journals (Sweden)

    Stefanie Zollmann

    2006-12-01

    Full Text Available Virtual studio technology plays an important role for modern television productions. Blue-screen matting is a common technique for integrating real actors or moderators into computer generated sceneries. Augmented reality offers the possibility to mix real and virtual in a more general context. This article proposes a new technological approach for combining real studio content with computer-generated information. Digital light projection allows a controlled spatial, temporal, chrominance and luminance modulation of illumination opening new possibilities for TV studios.

  10. Webizing mobile augmented reality content

    Science.gov (United States)

    Ahn, Sangchul; Ko, Heedong; Yoo, Byounghyun

    2014-01-01

    This paper presents a content structure for building mobile augmented reality (AR) applications in HTML5 to achieve a clean separation of the mobile AR content and the application logic for scaling as on the Web. We propose that the content structure contains the physical world as well as virtual assets for mobile AR applications as document object model (DOM) elements and that their behaviour and user interactions are controlled through DOM events by representing objects and places with a uniform resource identifier. Our content structure enables mobile AR applications to be seamlessly developed as normal HTML documents under the current Web eco-system.

  11. Indeterminacy and labor augmenting externalities

    DEFF Research Database (Denmark)

    Poulsen, Odile; Goenka, Aditya

    2002-01-01

    In this two-sector discrete time model of endogenous economic growth intersectoral effects are assumed to be "labor augmenting" We derive necessary and sufficient conditions for local indeterminacy and multiplicity of the balanced growth path in terms of factor intensities in both sectors....... The balanced growth path is unique if the consumption good sector is more capital intensive. However, it can be indeterminate. When the investment good sector is more capital intensive a sufficient condition for indeterminacy is that there exists at least three balanced growth paths....

  12. CO2 Capture with Enzyme Synthetic Analogue

    Energy Technology Data Exchange (ETDEWEB)

    Cordatos, Harry

    2010-11-08

    Overview of an ongoing, 2 year research project partially funded by APRA-E to create a novel, synthetic analogue of carbonic anhydrase and incorporate it into a membrane for removal of CO2 from flue gas in coal power plants. Mechanism background, preliminary feasibility study results, molecular modeling of analogue-CO2 interaction, and program timeline are provided.

  13. Strategy and methodology of dynamical analogue prediction

    Institute of Scientific and Technical Information of China (English)

    REN; HongLi; CHOU; JiFan

    2007-01-01

    In order to effectively improve numerical prediction level by using current models and data, the strategy and methodology of dynamical analogue prediction (DAP) is deeply studied in the present paper. A new idea to predict the prediction errors of dynamical model on the basis of historical analogue information is put forward so as to transform the dynamical prediction problem into the estimation problem of prediction errors. In terms of such an idea, a new prediction method of final analogue correction of errors (FACE) is developed. Furthermore, the FACE is applied to extra-seasonal prediction experiments on an operational atmosphere-ocean coupled general circulation model. Prediction results of summer mean circulation and total precipitation show that the FACE can to some extent reduce prediction errors, recover prediction variances, and improve prediction skills. Besides, sensitive experiments also show that predictions based on the FACE are evidently influenced by the number of analogues, analogue-selected variables and analogy metric.

  14. Fully analogue photonic reservoir computer.

    Science.gov (United States)

    Duport, François; Smerieri, Anteo; Akrout, Akram; Haelterman, Marc; Massar, Serge

    2016-01-01

    Introduced a decade ago, reservoir computing is an efficient approach for signal processing. State of the art capabilities have already been demonstrated with both computer simulations and physical implementations. If photonic reservoir computing appears to be promising a solution for ultrafast nontrivial computing, all the implementations presented up to now require digital pre or post processing, which prevents them from exploiting their full potential, in particular in terms of processing speed. We address here the possibility to get rid simultaneously of both digital pre and post processing. The standalone fully analogue reservoir computer resulting from our endeavour is compared to previous experiments and only exhibits rather limited degradation of performances. Our experiment constitutes a proof of concept for standalone physical reservoir computers.

  15. Augmented reality in medical education?

    Science.gov (United States)

    Kamphuis, Carolien; Barsom, Esther; Schijven, Marlies; Christoph, Noor

    2014-09-01

    Learning in the medical domain is to a large extent workplace learning and involves mastery of complex skills that require performance up to professional standards in the work environment. Since training in this real-life context is not always possible for reasons of safety, costs, or didactics, alternative ways are needed to achieve clinical excellence. Educational technology and more specifically augmented reality (AR) has the potential to offer a highly realistic situated learning experience supportive of complex medical learning and transfer. AR is a technology that adds virtual content to the physical real world, thereby augmenting the perception of reality. Three examples of dedicated AR learning environments for the medical domain are described. Five types of research questions are identified that may guide empirical research into the effects of these learning environments. Up to now, empirical research mainly appears to focus on the development, usability and initial implementation of AR for learning. Limited review results reflect the motivational value of AR, its potential for training psychomotor skills and the capacity to visualize the invisible, possibly leading to enhanced conceptual understanding of complex causality. PMID:24464832

  16. Psychotherapy augmentation through preconscious priming

    Directory of Open Access Journals (Sweden)

    Francois eBorgeat

    2013-03-01

    Full Text Available Objective: To test the hypothesis that repeated preconscious (masked priming of personalized positive cognitions could augment cognitive change and facilitate achievement of patients’ goals following a therapy.Methods: Twenty social phobic patients (13 women completed a 36 weeks study beginning by 12 weeks of group behavioural therapy. After the therapy, they received 6 weeks of preconscious priming and 6 weeks of a control procedure in a randomized cross-over design. The Priming condition involved listening twice daily with a passive attitude to a recording of individualized formulations of appropriate cognitions and attitudes masked by music. The Control condition involved listening to an indistinguishable recording where the formulations had been replaced by random numbers. Changes in social cognitions were measured by the Social Interaction Self Statements Test (SISST.Results: Patients improved following therapy. The Priming procedure was associated with increased positive cognitions and decreased negative cognitions on the SISST while the Control procedure was not. The Priming procedure induced more cognitive change when applied immediately after the group therapy. Conclusion: An effect of priming was observed on social phobia related cognitions in the expected direction. This self administered addition to a therapy could be seen as an augmentation strategy.

  17. Augmented reality in medical education?

    Science.gov (United States)

    Kamphuis, Carolien; Barsom, Esther; Schijven, Marlies; Christoph, Noor

    2014-09-01

    Learning in the medical domain is to a large extent workplace learning and involves mastery of complex skills that require performance up to professional standards in the work environment. Since training in this real-life context is not always possible for reasons of safety, costs, or didactics, alternative ways are needed to achieve clinical excellence. Educational technology and more specifically augmented reality (AR) has the potential to offer a highly realistic situated learning experience supportive of complex medical learning and transfer. AR is a technology that adds virtual content to the physical real world, thereby augmenting the perception of reality. Three examples of dedicated AR learning environments for the medical domain are described. Five types of research questions are identified that may guide empirical research into the effects of these learning environments. Up to now, empirical research mainly appears to focus on the development, usability and initial implementation of AR for learning. Limited review results reflect the motivational value of AR, its potential for training psychomotor skills and the capacity to visualize the invisible, possibly leading to enhanced conceptual understanding of complex causality.

  18. Preprint ARPPS Augmented Reality Pipeline Prospect System

    OpenAIRE

    Zhang, Xiaolei; Han, Yong; Hao, DongSheng; Lv, Zhihan

    2015-01-01

    This is the preprint version of our paper on ICONIP. Outdoor augmented reality geographic information system (ARGIS) is the hot application of augmented reality over recent years. This paper concludes the key solutions of ARGIS, designs the mobile augmented reality pipeline prospect system (ARPPS), and respectively realizes the machine vision based pipeline prospect system (MVBPPS) and the sensor based pipeline prospect system (SBPPS). With the MVBPPS's realization, this paper studies the neu...

  19. Augmented Reality Using JavaScript

    OpenAIRE

    Hailemichael, Aida

    2013-01-01

    The project goal was to provide a mobile application, for a venue called Kulturhuset Karelia which is located in Tammisaari Finland. In this paper, the concept of Augmented Reality technology is briefly discussed along with the mobile application for the venue. The utilisation of JavaScript for creating Augmented reality content for mobile Augmented reality browser is also demonstrated. The application was created by using Architecht API which is Jacvascript library based on the Wikitude...

  20. InAR:Inverse Augmented Reality

    OpenAIRE

    Hu, Hao; Cui, Hainan

    2015-01-01

    Augmented reality is the art to seamlessly fuse virtual objects into real ones. In this short note, we address the opposite problem, the inverse augmented reality, that is, given a perfectly augmented reality scene where human is unable to distinguish real objects from virtual ones, how the machine could help do the job. We show by structure from motion (SFM), a simple 3D reconstruction technique from images in computer vision, the real and virtual objects can be easily separated in the recon...

  1. Interactive Assembly Guide using Augmented Reality

    DEFF Research Database (Denmark)

    Andersen, Martin; Andersen, Rasmus Skovgaard; Larsen, Christian Lindequist;

    2009-01-01

    This paper presents an Augmented Reality system for aiding a pump assembling process at Grundfos, one of the leading pump producers. Stable pose estimation of the pump is required in order to augment the graphics correctly. This is achieved by matching image edges with synthesized edges from CAD...... norm. A dynamic visualization of the augmented graphics provides the user with guidance. Usability tests show that the accuracy of the system is sufficient for assembling the pump....

  2. AB027. Penile augmentation: informed text briefing

    OpenAIRE

    Park, Nam Cheol

    2016-01-01

    The men’s desire to have larger and longer penis have created endless medical demands throughout human history. Until up to date, various medical skills for penile augmentation have developed in aspect of experimental and clinical outcome. Recently with throwing away socially unacceptable ideas, the need for penile augmentation is considered as equivalent level with mammoplasty for breast augmentation in women for cosmetic and psychological reason. Concurrently advanced technologies in medica...

  3. Augmenting Locomotion in an Anthropomorphic System

    Directory of Open Access Journals (Sweden)

    Derek Wight

    2005-02-01

    Full Text Available A powered orthosis has applications ranging from assisting the elderly to augmenting astronauts. An assistive control scheme is developed that uses the force from a slave actuator to augment the force of a master actuator. This can be used to augment a closed-loop control scheme applied to the master actuator. Initially, actuator augmentation is explored both theoretically and experimentally using a simple mechanical system. The control scheme is then applied to a scale model of human lower limbs on a stationary bicycle to investigate the feasibility of a powered orthosis using pneumatic muscle actuators.

  4. RFIDice - Augmenting Tabletop Dice with RFID

    Directory of Open Access Journals (Sweden)

    Marc Langheinrich

    2008-08-01

    Full Text Available Augmented dice allow players of tabletop games to have the result of a roll be automatically recorded by a computer, e.g., for supporting strategy games. We have built a set of three augmented-dice-prototypes based on radio frequency identification (RFID technology, which allows us to build robust, cheap, and small augmented dice. Using a corresponding readout infrastructure and a sample application, we have evaluated our approach and show its advantages over other dice augmentation methods discussed in the literature.

  5. Can hyaluronan injections augment deficient papillae at implant-supported crowns in the anterior maxilla?

    DEFF Research Database (Denmark)

    Bertl, Kristina; Gotfredsen, Klaus; Jensen, Simon S;

    2016-01-01

    OBJECTIVES: The present randomized controlled trial aimed to assess the effect of hyaluronan (HY) injections to augment deficient interproximal papillae at implant-supported crowns in the anterior maxilla. METHODS: Twenty-two patients with a deficient papilla in the anterior maxilla next to an im......OBJECTIVES: The present randomized controlled trial aimed to assess the effect of hyaluronan (HY) injections to augment deficient interproximal papillae at implant-supported crowns in the anterior maxilla. METHODS: Twenty-two patients with a deficient papilla in the anterior maxilla next...... index score (MPIS), and standard clinical periodontal parameters. Pain level after injection was recorded on a visual analogue scale (VAS). The deficient area was evaluated on clinical photographs, and the esthetic appearance was recorded on a VAS. Differences in mucosal volume were assessed after 3...

  6. Augmented reality for improved safety

    CERN Multimedia

    Stefania Pandolfi

    2016-01-01

    Sometimes, CERN experts have to operate in low visibility conditions or in the presence of possible hazards. Minimising the duration of the operation and reducing the risk of errors is therefore crucial to ensuring the safety of personnel. The EDUSAFE project integrates different technologies to create a wearable personnel safety system based on augmented reality.    The EDUSAFE integrated safety system uses a camera mounted on the helmet to monitor the working area.  In its everyday operation of machines and facilities, CERN adopts a whole set of measures and safety equipment to ensure the safety of its personnel, including personal wearable safety devices and access control systems. However, sometimes, scheduled and emergency maintenance work needs to be done in zones with potential cryogenic hazards, in the presence of radioactive equipment or simply in demanding conditions where visibility is low and moving around is difficult. The EDUSAFE Marie Curie Innovative&...

  7. Sensory augmentation for the blind

    Directory of Open Access Journals (Sweden)

    Silke Manuela Kärcher

    2012-03-01

    Full Text Available Enacted theories of consciousness conjecture that perception and cognition arise from an active experience of the regular relations that are tying together the sensory stimulation of different modalities and associated motor actions. Previous experiments investigated this concept by employing the technique of sensory substitution. Building on these studies, here we test a set of hypotheses derived from this framework and investigate the utility of sensory augmentation in handicapped people. We provide a late blind subject with a new set of sensorimotor laws: A vibro-tactile belt continually signals the direction of magnetic north. The subject completed a set of behavioral tests before and after an extended training period. The tests were complemented by questionnaires and interviews. This newly supplied information improved performance on different time scales. In a pointing task we demonstrate an instant improvement of performance based on the signal provided by the device. Furthermore, the signal was helpful in relevant daily tasks, often complicated for the blind, such as keeping a direction over longer distances or taking shortcuts in familiar environments. A homing task with an additional attentional load demonstrated a significant improvement after training. The subject found the directional information highly expedient for the adjustment of his inner maps of familiar environments and describes an increase in his feeling of security when exploring unfamiliar environments with the belt. The results give evidence for a firm integration of the newly supplied signals into the behavior of this late blind subject with better navigational performance and more courageous behavior in unfamiliar environments. Most importantly, the complementary information provided by the belt lead to a positive emotional impact with enhanced feeling of security. This experimental approach demonstrates the potential of sensory augmentation devices for the help of

  8. Synthesis and biological evaluation of febrifugine analogues.

    Science.gov (United States)

    Mai, Huong Doan Thi; Thanh, Giang Vo; Tran, Van Hieu; Vu, Van Nam; Vu, Van Loi; Le, Cong Vinh; Nguyen, Thuy Linh; Phi, Thi Dao; Truong, Bich Ngan; Chau, Van Minh; Pham, Van Cuong

    2014-12-01

    A series of febrifugine analogues were designed and synthesized. Antimalarial activity evaluation of the synthetic compounds indicated that these derivatives had a strong inhibition against both chloroquine-sensitive and -resistant Plasmodium falciparum parasites. Many of them were found to be more active than febrifugine hydrochloride. The tested analogues had also a significant cytotoxicity against four cancer cell lines (KB, MCF7, LU1 and HepG2). Among the synthetic analogues, two compounds 17b and 17h displayed a moderate cytotoxicity while they exhibited a remarkable antimalarial activity. PMID:25632466

  9. Enhancing Education through Mobile Augmented Reality

    Science.gov (United States)

    Joan, D. R. Robert

    2015-01-01

    In this article, the author has discussed about the Mobile Augmented Reality and enhancing education through it. The aim of the present study was to give some general information about mobile augmented reality which helps to boost education. Purpose of the current study reveals the mobile networks which are used in the institution campus as well…

  10. Motor skill learning: age and augmented feedback

    NARCIS (Netherlands)

    Dijk, van Henk

    2006-01-01

    Learning motor skills is fundamental to human life. One of the most critical variables affecting motor learning, aside from practice itself, is augmented feedback (performance-related information). Although there is abundance of research on how young adults use augmented feedback to learn motor skil

  11. From Augmentation Media to Meme Media.

    Science.gov (United States)

    Tanaka, Yuzuru

    Computers as meta media are now evolving from augmentation media vehicles to meme media vehicles. While an augmentation media system provides a seamlessly integrated environment of various tools and documents, meme media system provides further functions to edit and distribute tools and documents. Documents and tools on meme media can easily…

  12. Space analogue studies in Antarctica

    Science.gov (United States)

    Lugg, D.; Shepanek, M.

    1999-01-01

    Medical research has been carried out on the Australian National Antarctic Research Expeditions (ANARE) for 50 years. As an extension of this program collaborative Australian/United States research on immunology, microbiology, psychology and remote medicine has produced important data and insight on how humans adapt to the stress of extreme isolation, confinement and the harsh environment of Antarctica. An outstanding analogue for the isolation and confinement of space missions (especially planetary outposts), ANARE has been used as an international research platform by Australia and the United States since 1993. Collaborative research has demonstrated a lowered responsiveness of the immune system under the isolation and confinement of Antarctic winter-over; a reduction of almost 50% in T cell proliferation to mitogen phytohaemogglutinin, as well as changes in latent herpesvirus states and the expansion of the polyclonal latent Epstein-Barr virus infected B cell populations. Although no clinically significant disease has been found to result from these immune changes, research is currently assessing the effects of psychological factors on the immune system. This and associated research performed to date and its relevance to both organisations is discussed, and comment made on possible extensions to the program in both medical and other fields.

  13. Condensed matter analogues of cosmology

    Science.gov (United States)

    Kibble, Tom; Srivastava, Ajit

    2013-10-01

    It is always exciting when developments in one branch of physics turn out to have relevance in a quite different branch. It would be hard to find two branches farther apart in terms of energy scales than early-universe cosmology and low-temperature condensed matter physics. Nevertheless ideas about the formation of topological defects during rapid phase transitions that originated in the context of the very early universe have proved remarkably fruitful when applied to a variety of condensed matter systems. The mathematical frameworks for describing these systems can be very similar. This interconnection has led to a deeper understanding of the phenomena in condensed matter systems utilizing ideas from cosmology. At the same time, one can view these condensed matter analogues as providing, at least in a limited sense, experimental access to the phenomena of the early universe for which no direct probe is possible. As this special issue well illustrates, this remains a dynamic and exciting field. The basic idea is that when a system goes through a rapid symmetry-breaking phase transition from a symmetric phase into one with spontaneously broken symmetry, the order parameter may make different choices in different regions, creating domains that when they meet can trap defects. The scale of those domains, and hence the density of defects, is constrained by the rate at which the system goes through the transition and the speed with which order parameter information propagates. This is what has come to be known as the Kibble-Zurek mechanism. The resultant scaling laws have now been tested in a considerable variety of different systems. The earliest experiments illustrating the analogy between cosmology and condensed matter were in liquid crystals, in particular on the isotropic-to-nematic transition, primarily because it is very easy to induce the phase transition (typically at room temperature) and to image precisely what is going on. This field remains one of the

  14. Antimicrobial Activity of Resveratrol Analogues

    Directory of Open Access Journals (Sweden)

    Malik Chalal

    2014-06-01

    Full Text Available Stilbenes, especially resveratrol and its derivatives, have become famous for their positive effects on a wide range of medical disorders, as indicated by a huge number of published studies. A less investigated area of research is their antimicrobial properties. A series of 13 trans-resveratrol analogues was synthesized via Wittig or Heck reactions, and their antimicrobial activity assessed on two different grapevine pathogens responsible for severe diseases in the vineyard. The entire series, together with resveratrol, was first evaluated on the zoospore mobility and sporulation level of Plasmopara viticola (the oomycete responsible for downy mildew. Stilbenes displayed a spectrum of activity ranging from low to high. Six of them, including the most active ones, were subsequently tested on the development of Botrytis cinerea (fungus responsible for grey mold. The results obtained allowed us to identify the most active stilbenes against both grapevine pathogens, to compare the antimicrobial activity of the evaluated series of stilbenes, and to discuss the relationship between their chemical structure (number and position of methoxy and hydroxy groups and antimicrobial activity.

  15. Augmented Reality Implementation Methods in Mainstream Applications

    CERN Document Server

    Prochazka, David

    2011-01-01

    Augmented reality has became an useful tool in many areas from space exploration to military applications. Although used theoretical principles are well known for almost a decade, the augmented reality is almost exclusively used in high budget solutions with a special hardware. However, in last few years we could see rising popularity of many projects focused on deployment of the augmented reality on different mobile devices. Our article is aimed on developers who consider development of an augmented reality application for the mainstream market. Such developers will be forced to keep the application price, therefore also the development price, at reasonable level. Usage of existing image processing software library could bring a significant cut-down of the development costs. In the theoretical part of the article is presented an overview of the augmented reality application structure. Further, an approach for selection appropriate library as well as the review of the existing software libraries focused in th...

  16. Diffuser Augmented Horizontal Axis Tidal Current Turbines

    Directory of Open Access Journals (Sweden)

    Nasir Mehmood

    2012-09-01

    Full Text Available The renewal energy technologies are increasingly popular to ensure future energy sustenance and address environmental issues. The tides are enormous and consistent untapped resource of renewable energy. The growing interest in exploring tidal energy has compelling reasons such as security and diversity of supply, intermittent but predictable and limited social and environmental impacts. The tidal energy industry is undergoing an increasing shift towards diffuser augmented turbines. The reason is the higher power output of diffuser augmented turbines compared to conventional open turbines. The purpose of this study is to present a comprehensive review of diffuser augmented horizontal axis tidal current turbines. The components, relative advantages, limitations and design parameters of diffuser augmented horizontal axis tidal current turbines are presented in detail. CFD simulation of NACA 0016 airfoil is carried out to explore its potential for designing a diffuser. The core issues associated with diffuser augmented horizontal axis tidal current turbines are also discussed.

  17. Sulfur analogues of psychotomimetic agents. Monothio analogues of mescaline and isomescaline.

    Science.gov (United States)

    Jacob, P; Shulgin, A T

    1981-11-01

    Two monothio analogues of mescaline and three monothio analogues of 2,3,4-trimethoxyphenethylamine (isomescaline) have been synthesized and characterized. Only the two mescaline analogues (3-and 4-thiomescaline) were found to be psychotomimetics in man, being 6 and 12 times more potent than mescaline, respectively. All five compounds can serve as substrates for bovine plasma monoamine oxidase in vitro, but no positive correlation is apparent between the extent of enzymatic degradation and human psychotomimetic potency.

  18. Acoustojet: acoustic analogue of photonic jet phenomenon

    CERN Document Server

    Minin, Igor V

    2016-01-01

    It has been demonstrated for the first time that an existence of acoustic analogue of photonic jet phenomenon, called acoustojet, providing for subwavelength localization of acoustic field in the shadow area of arbitrary 3D penetrable mesoscale particle, is possible.

  19. Natural analogues and radionuclide transport model validation

    International Nuclear Information System (INIS)

    In this paper, some possible roles for natural analogues are discussed from the point of view of those involved with the development of mathematical models for radionuclide transport and with the use of these models in repository safety assessments. The characteristic features of a safety assessment are outlined in order to address the questions of where natural analogues can be used to improve our understanding of the processes involved and where they can assist in validating the models that are used. Natural analogues have the potential to provide useful information about some critical processes, especially long-term chemical processes and migration rates. There is likely to be considerable uncertainty and ambiguity associated with the interpretation of natural analogues, and thus it is their general features which should be emphasized, and models with appropriate levels of sophistication should be used. Experience gained in modelling the Koongarra uranium deposit in northern Australia is drawn upon. (author)

  20. Total Synthesis of the Analogue of Icogenin

    Institute of Scientific and Technical Information of China (English)

    Shu Jie HOU; Peng XU; Liang ZHOU; De Quan YU; Ping Sheng LEI; Chuan Chun ZOU

    2006-01-01

    One of the analogues of icogenin, a natural furostanol saponin showing strong cytotoxic effect on cancer cell, was first synthesized via convergent strategy by using diosgenin and available monosaccharides as starting materials,

  1. Second-Generation Fluorescent Quadracyclic Adenine Analogues

    DEFF Research Database (Denmark)

    Dumat, Blaise; Bood, Mattias; Wranne, Moa S.;

    2015-01-01

    Fluorescent base analogues comprise a group of increasingly important molecules for the investigation of nucleic acid structure, dynamics, and interactions with other molecules. Herein, we report on the quantum chemical calculation aided design, synthesis, and characterization of four new putativ...

  2. The structure activity relationship of discodermolide analogues.

    Science.gov (United States)

    Shaw, Simon J

    2008-03-01

    The marine polyketide discodermolide is a member of a class of natural products that stabilize microtubules. Many analogues have been synthesized suggesting that few changes can be made to the internal carbon backbone. Both ends of the molecule, however, can be modified. The majority of analogues have been generated via modification of the lactone region. This suggests that significant simplifications can be made in this region provided that the lactone moiety is maintained.

  3. Newer insulin analogues and inhaled insulin

    OpenAIRE

    Girish C; Manikandan S; Jayanthi M

    2006-01-01

    Diabetes is a metabolic disease with high prevalence worldwide. Exogenous insulin is used in the management of this condition. The development of human insulin has provided tighter control of glycaemia in diabetic patients. Insulin analogues like insulin lispro and aspart were developed to closely match its profile with physiological secretion. The newer additions to this armamentarium are insulin glulisine, insulin detemir and albulin.Insulin glulisine is a short acting analogue with a rapid...

  4. Synthesis of caged Garcinia xanthone analogues

    OpenAIRE

    Cho, Woo Cheal

    2009-01-01

    A new synthetic strategy is developed toward the synthesis of the caged Garcinia xanthone analogues. The key to the strategy is a Pd-catalyzed reverse prenylation reaction. This new synthetic approach provides a rapid and efficient access to various caged analogues, including cluvenone which is known to induce apoptosis and exhibit significant cytotoxicity in various cancer cell lines. Evaluation of their growth inhibitory activities also leads to identification of the pharmacophoric motif of...

  5. Somatostatin analogue treatment of neuroendocrine tumours.

    OpenAIRE

    de Herder, W. W.; van der Lely, A.J.; Lamberts, S. W.

    1996-01-01

    The long-acting analogues of somatostatin have an established place in the medical treatment of patients with neuroendocrine tumours. They act through binding with specific, high-affinity membrane receptors. Somatostatin analogue therapy is an effective and safe treatment for most growth hormone and thyrothropin-secreting pituitary adenomas. The potential therapeutic consequences of the presence of somatostatin receptors on clinically 'nonfunctioning' pituitary tumours are still uncertain. So...

  6. Wireless Augmented Reality Prototype (WARP)

    Science.gov (United States)

    Devereaux, A. S.

    1999-01-01

    Initiated in January, 1997, under NASA's Office of Life and Microgravity Sciences and Applications, the Wireless Augmented Reality Prototype (WARP) is a means to leverage recent advances in communications, displays, imaging sensors, biosensors, voice recognition and microelectronics to develop a hands-free, tetherless system capable of real-time personal display and control of computer system resources. Using WARP, an astronaut may efficiently operate and monitor any computer-controllable activity inside or outside the vehicle or station. The WARP concept is a lightweight, unobtrusive heads-up display with a wireless wearable control unit. Connectivity to the external system is achieved through a high-rate radio link from the WARP personal unit to a base station unit installed into any system PC. The radio link has been specially engineered to operate within the high- interference, high-multipath environment of a space shuttle or space station module. Through this virtual terminal, the astronaut will be able to view and manipulate imagery, text or video, using voice commands to control the terminal operations. WARP's hands-free access to computer-based instruction texts, diagrams and checklists replaces juggling manuals and clipboards, and tetherless computer system access allows free motion throughout a cabin while monitoring and operating equipment.

  7. Augmented Reality for Android Platform

    OpenAIRE

    Lžičař, Radek

    2011-01-01

    Tato diplomová práce se zabývá návrhem a realizací systému rozšířené reality na mobilní platformě Google Android s využitím polohových senzorů. Aplikace slouží jako navigace a zobrazuje geografické body zájmu. Práce se věnuje problematice rozšířené reality na mobilních zařízeních, návrhem vlastního frameworku a poté zmiňuje detaily implementace vybraných problémů. Nakonec je popsán způsob testování a zhodnoceny výsledky práce. This thesis describes design and implementation of augment...

  8. Augmented Reality Repair Guidance System

    Directory of Open Access Journals (Sweden)

    Sidharth Bhatia

    2012-07-01

    Full Text Available The daily life of a common man revolves around various forms of appliances/gadgets he uses throughout the day such as a mobile phone, laptop, printer, microwave oven, washing machine, etc. Although these appliances/gadgets are taken by most of the people for granted, the problem occurs when any of these things do not work as they are expected to. Getting them to the repair shops for every small glitch is expensive as well as time consuming. Although most of the companies which produce these appliances/gadgets do supply them with basic manuals, which deal with how to solve these minor issues, but reading them and at the same time repairing the corresponding appliance/gadget can be a frustrating task at times. These problems can be reduced to a large extent if some kind of live guidance is available. In this paper we propose a method to do so with the help of an augmented reality based system that will guide the user to carry out small scale repair jobs on these gadgets. All that is required is a decent webcam and a computing device, with a processor of 1 GHz or more and a display screen.

  9. Mixing Augmentation of Supersonic Streams

    Institute of Scientific and Technical Information of China (English)

    S. Hari; J. Kurian

    2001-01-01

    The use of passive mixing devices to enhance the mixing of supersonic streams is of importance in many aerospace and allied applications. A comparative experimental study of two such non-conventional axi symmetric supersonic nozzles for mixing augmentation is undertaken in the present study. The nozzles studied are conventional convergent divergent (c-d), ramp, and nozzle with secondary tabs at the Mach number of 1.7.The freejet characteristics of the jets from the nozzles and the confined mixing of the jets under isothermal and non-isothermal conditions were experimentally investigated. In addition, schlieren and laser light sheet methods are employed for flow visualization. Results of experiments on freejet showed rapid total pressure decay, higher jet width, and increased shear layer width in the case of jets from non-conventional nozzles. Also visualized were complex shock patterns in these jets. The confined mixing studies in both cold and hot flows confirm the increased mixing behavior of non-conventional nozzles within shorter mixing duct lengths. Laser sheet visualization clearly demonstrated the formation of streamwise vortices, which accounts for the enhanced mixing while employing the nozzles under study.

  10. Digital Augmented Reality Audio Headset

    Directory of Open Access Journals (Sweden)

    Jussi Rämö

    2012-01-01

    Full Text Available Augmented reality audio (ARA combines virtual sound sources with the real sonic environment of the user. An ARA system can be realized with a headset containing binaural microphones. Ideally, the ARA headset should be acoustically transparent, that is, it should not cause audible modification to the surrounding sound. A practical implementation of an ARA mixer requires a low-latency headphone reproduction system with additional equalization to compensate for the attenuation and the modified ear canal resonances caused by the headphones. This paper proposes digital IIR filters to realize the required equalization and evaluates a real-time prototype ARA system. Measurements show that the throughput latency of the digital prototype ARA system can be less than 1.4 ms, which is sufficiently small in practice. When the direct and processed sounds are combined in the ear, a comb filtering effect is brought about and appears as notches in the frequency response. The comb filter effect in speech and music signals was studied in a listening test and it was found to be inaudible when the attenuation is 20 dB. Insert ARA headphones have a sufficient attenuation at frequencies above about 1 kHz. The proposed digital ARA system enables several immersive audio applications, such as a virtual audio tourist guide and audio teleconferencing.

  11. Augmented reality: past, present, future

    Science.gov (United States)

    Inzerillo, Laura

    2013-03-01

    A great opportunity has permitted to carry out a cultural, historical, architectural and social research with great impact factor on the international cultural interest. We are talking about the realization of a museum whose the main theme is the visit and the discovery of a monument of great prestige: the monumental building the "Steri" in Palermo. The museum is divided into sub themes including the one above all, that has aroused the international interest so much that it has been presented the instance to include the museum in the cultural heritage of UNESCO. It is the realization of a museum path that regards the cells of the Inquisition, which are located just inside of some buildings of the monumental building. The project, as a whole, is faced, in a total view, between the various competences implicated: historic, chemic, architectonic, topographic, drawing, representation, virtual communication, informatics. The birth of the museum will be a sum of the results of all these disciplines involved. Methodology, implementation, fruition, virtual museum, goals, 2D graphic restitution, effects on the cultural heritage and landscape environmental, augmented reality, Surveying 2D and 3D, hi-touch screen, Photogrammetric survey, Photographic survey, representation, drawing 3D and more than this has been dealt with this research.

  12. The Virtuality and Reality of Augmented Reality

    Directory of Open Access Journals (Sweden)

    Jung Yeon Ma

    2007-02-01

    Full Text Available This thesis explores the creative possibilities and implications of Augmented Reality, not just as a specific technology of computer science, but as one of high technologies that influence people’s perception and even the concepts of the real and the virtual. For a broader definition of Augmented Reality which has a unique status between virtual environment and real environment, the virtuality and the reality of Augmented Reality are discussed in an interdisciplinary context such as arts, philosophy, and film and animation studies. This approach is rooted in the belief that theory of new media ought to traverse and encompass all realms of academic categories.

  13. Augmented reality-assisted skull base surgery.

    Science.gov (United States)

    Cabrilo, I; Sarrafzadeh, A; Bijlenga, P; Landis, B N; Schaller, K

    2014-12-01

    Neuronavigation is widely considered as a valuable tool during skull base surgery. Advances in neuronavigation technology, with the integration of augmented reality, present advantages over traditional point-based neuronavigation. However, this development has not yet made its way into routine surgical practice, possibly due to a lack of acquaintance with these systems. In this report, we illustrate the usefulness and easy application of augmented reality-based neuronavigation through a case example of a patient with a clivus chordoma. We also demonstrate how augmented reality can help throughout all phases of a skull base procedure, from the verification of neuronavigation accuracy to intraoperative image-guidance.

  14. Muzzle shunt augmentation of conventional railguns

    Energy Technology Data Exchange (ETDEWEB)

    Parker, J.V. (Los Alamos National Lab., NM (United States). Physics Div.)

    1991-01-01

    This paper reports on augmentation which is a technique for reducing the armature current and hence the armature power dissipation in a plasma armature railgun. In spite of the advantages, no large augmented railguns have been built, primarily due to the mechanical and electrical complexity introduced by the extra conductors required. it is possible to achieve some of the benefits of augmentation in a conventional railgun by diverting a fraction {phi} of the input current through a shunt path at the muzzle of the railgun. In particular, the relation between force and armature current is the same as that obtained in an n-turn, series-connected augmented railgun with n = 1/(1 {minus} {phi}). The price of this simplification is a reduction in electrical efficiency and some additional complexity in the external electrical system.

  15. Resonant Behavior of an Augmented Railgun

    CERN Document Server

    Bahder, Thomas B

    2011-01-01

    We consider a lumped circuit model of an augmented electromagnetic railgun that consists of a gun circuit and an augmentation circuit that is inductively coupled to the gun circuit. The gun circuit is driven by a d.c. voltage generator, and the augmentation circuit is driven by an a.c. voltage generator. Using sample parameters, we numerically solve the three non-linear dynamical equations that describe this system. We find that there is a resonant behavior in the armature kinetic energy as a function of the frequency of the voltage generator in the augmentation circuit. This resonant behavior may be exploited to increase armature kinetic energy. Alternatively, if the presence of the kinetic energy resonance is not taken into account, parameters may be chosen that result in less than optimal kinetic energy and efficiency.

  16. ARC Code TI: ROC Curve Code Augmentation

    Data.gov (United States)

    National Aeronautics and Space Administration — ROC (Receiver Operating Characteristic) curve Code Augmentation was written by Rodney Martin and John Stutz at NASA Ames Research Center and is a modification of...

  17. Affordances in Mobile Augmented Reality Applications

    Directory of Open Access Journals (Sweden)

    Tor Gjøsæter

    2014-10-01

    Full Text Available This paper explores the affordances of augmented reality content in a mobile augmented reality application. A user study was conducted by performing a multi-camera video recording of seven think aloud sessions. The think aloud sessions consisted of individual users performing tasks, exploring and experiencing a mobile augmented reality (MAR application we developed for the iOS platform named ARad. We discuss the instrumental affordances we observed when users interacted with augmented reality content, as well as more complex affordances rising from conventions from media content, AR and the traditional WIMP paradigm. We find that remediation of traditional newspaper content through the MAR medium can provide engaging, pleasing and exciting user experiences. However, the some of the content still suffers from being shoveled onto the MAR platform without adapting it properly. Finally, we discuss what content was most successfully mediated to the user and how the content impacts the user experience.

  18. Augmented Reality Simulations on Handheld Computers

    Science.gov (United States)

    Squire, Kurt; Klopfer, Eric

    2007-01-01

    Advancements in handheld computing, particularly its portability, social interactivity, context sensitivity, connectivity, and individuality, open new opportunities for immersive learning environments. This article articulates the pedagogical potential of augmented reality simulations in environmental engineering education by immersing students in…

  19. Intraoperative Endoscopic Augmented Reality in Third Ventriculostomy

    OpenAIRE

    Ciucci, Matteo

    2009-01-01

    In neurosurgery, as a result of the brain-shift, the preoperative patient models used as a intraoperative reference change. A meaningful use of the preoperative virtual models during the operation requires for a model update. The NEAR project, Neuroendoscopy towards Augmented Reality, describes a new camera calibration model for high distorted lenses and introduces the concept of active endoscopes endowed with with navigation, camera calibration, augmented reality and triangulation modules.

  20. Augmenting SCORM Manifests with Adaptive Links

    OpenAIRE

    Abdullah, NA; Bailey, CP; Davis, HC

    2004-01-01

    This paper describes an experiment to augment SCORM manifests with adaptive links using AuldLinky in order to promote content reusability, interoperability and personalized e-learning. Our technique involves the automatic deduction of a concept map from a manifest and the transformation of its pertinent elements into FOHM (Fundamental Object Hypermedia Model) objects before augmenting the information with complimentary and adaptive links using AuldLinky.

  1. Muzzle shunt augmentation of conventional railguns

    Energy Technology Data Exchange (ETDEWEB)

    Parker, J.V.

    1990-01-01

    Augmentation is a well-known technique for reducing the armature current and hence the armature power dissipation in a plasma armature railgun. In spite of the advantages, no large augmented railguns have been built, primarily due to the mechanical and electrical complexity introduce by the extra conductors required. It is possible to achieve some of the benefits of augmentation in conventional railgun by diverting a fraction {phi} of the input current through a shunt path at the muzzle of the railgun. In particular, the relation between force and armature current is the same as that obtained in an n-turn, series connected augmented railgun with n = 1/(1-{phi}). The price of this simplification is a reduction in electrical efficiency and some additional complexity in the external electrical system. Additions to the electrical system are required to establish the shunt current and to control its magnitude during projectile acceleration. The relationship between muzzle shunt augmentation and conventional series augmentation is developed and various techniques is developed and various techniques for establishing and controlling the shunt current are illustrated with a practical example. 5 refs., 8 figs., 2 tabs.

  2. Geomagnetic properties of Proxima Centauri b analogues

    CERN Document Server

    Zuluaga, Jorge I

    2016-01-01

    The recent discovery of a planet around the closest star, Proxima Centauri, could represent a quantum leap on the testability of models in exoplanet sciences. Unlike any other discovered exoplanet, models of planetary processes in Proxima b could be contrasted against near future telescopic observations and far future in-situ measurements. In this paper we study the geomagnetic properties of Proxima b analogues, namely, solid planets with masses close but larger than Earth's mass, periods of rotation of several days and habitable surface conditions. Assuming different planetary masses, bulk compositions and periods of rotations, we calculate for each planetary analogue its radius, heat flux, time of inner core formation, dynamo lifetime and minimum dipole magnetic moment. We find that most ($\\gtrsim$70\\%) Proxima b analogues develop intrinsic dynamos that last at least 3 Gyr, although only half of them are older than the present age of the host star ($4-6$ Gyr). Relying in our planetary evolution models, we p...

  3. Synthesis and anticancer evaluation of spermatinamine analogues

    KAUST Repository

    Moosa, Basem A.

    2016-02-04

    Spermatinamine was isolated from an Australian marine sponge, Pseudoceratina sp. as an inhibitor of isoprenylcystiene carboxyl methyltransferase (Icmt), an attractive and novel anticancer target. Herein, we report the synthesis of spermatinamine analogues and their cytotoxic evaluation against three human cancer cell lines i.e. cervix adenocarcinoma (HeLa), breast adenocarcinoma (MCF-7), and prostate carcinoma (DU145). Analogues 12, 14 and 15 were found to be the most potent against one or more cell lines with the IC50 values in the range of 5 - 10 μM. The obtained results suggested that longer polyamine linker along with aromatic oxime substitution provided the most potent analogue compounds against cancer cell lines.

  4. Augmenting digital displays with computation

    Science.gov (United States)

    Liu, Jing

    As we inevitably step deeper and deeper into a world connected via the Internet, more and more information will be exchanged digitally. Displays are the interface between digital information and each individual. Naturally, one fundamental goal of displays is to reproduce information as realistically as possible since humans still care a lot about what happens in the real world. Human eyes are the receiving end of such information exchange; therefore it is impossible to study displays without studying the human visual system. In fact, the design of displays is rather closely coupled with what human eyes are capable of perceiving. For example, we are less interested in building displays that emit light in the invisible spectrum. This dissertation explores how we can augment displays with computation, which takes both display hardware and the human visual system into consideration. Four novel projects on display technologies are included in this dissertation: First, we propose a software-based approach to driving multiview autostereoscopic displays. Our display algorithm can dynamically assign views to hardware display zones based on multiple observers' current head positions, substantially reducing crosstalk and stereo inversion. Second, we present a dense projector array that creates a seamless 3D viewing experience for multiple viewers. We smoothly interpolate the set of viewer heights and distances on a per-vertex basis across the arrays field of view, reducing image distortion, crosstalk, and artifacts from tracking errors. Third, we propose a method for high dynamic range display calibration that takes into account the variation of the chrominance error over luminance. We propose a data structure for enabling efficient representation and querying of the calibration function, which also allows user-guided balancing between memory consumption and the amount of computation. Fourth, we present user studies that demonstrate that the ˜ 60 Hz critical flicker fusion

  5. Classical Simulated Annealing Using Quantum Analogues

    Science.gov (United States)

    La Cour, Brian R.; Troupe, James E.; Mark, Hans M.

    2016-06-01

    In this paper we consider the use of certain classical analogues to quantum tunneling behavior to improve the performance of simulated annealing on a discrete spin system of the general Ising form. Specifically, we consider the use of multiple simultaneous spin flips at each annealing step as an analogue to quantum spin coherence as well as modifications of the Boltzmann acceptance probability to mimic quantum tunneling. We find that the use of multiple spin flips can indeed be advantageous under certain annealing schedules, but only for long anneal times.

  6. Classical Simulated Annealing Using Quantum Analogues

    Science.gov (United States)

    La Cour, Brian R.; Troupe, James E.; Mark, Hans M.

    2016-08-01

    In this paper we consider the use of certain classical analogues to quantum tunneling behavior to improve the performance of simulated annealing on a discrete spin system of the general Ising form. Specifically, we consider the use of multiple simultaneous spin flips at each annealing step as an analogue to quantum spin coherence as well as modifications of the Boltzmann acceptance probability to mimic quantum tunneling. We find that the use of multiple spin flips can indeed be advantageous under certain annealing schedules, but only for long anneal times.

  7. Analogue alternative the electronic analogue computer in Britain and the USA, 1930-1975

    CERN Document Server

    Small, James S

    2013-01-01

    We are in the midst of a digital revolution - until recently, the majority of appliances used in everyday life have been developed with analogue technology. Now, either at home or out and about, we are surrounded by digital technology such as digital 'film', audio systems, computers and telephones. From the late 1940s until the 1970s, analogue technology was a genuine alternative to digital, and the two competing technologies ran parallel with each other. During this period, a community of engineers, scientists, academics and businessmen continued to develop and promote the analogue computer.

  8. Augmented Reality for the Improvement of Remote Laboratories: An Augmented Remote Laboratory

    Science.gov (United States)

    Andujar, J. M.; Mejias, A.; Marquez, M. A.

    2011-01-01

    Augmented reality (AR) provides huge opportunities for online teaching in science and engineering, as these disciplines place emphasis on practical training and unsuited to completely nonclassroom training. This paper proposes a new concept in virtual and remote laboratories: the augmented remote laboratory (ARL). ARL is being tested in the first…

  9. ARSC: Augmented Reality Student Card--An Augmented Reality Solution for the Education Field

    Science.gov (United States)

    El Sayed, Neven A. M.; Zayed, Hala H.; Sharawy, Mohamed I.

    2011-01-01

    Augmented Reality (AR) is the technology of adding virtual objects to real scenes through enabling the addition of missing information in real life. As the lack of resources is a problem that can be solved through AR, this paper presents and explains the usage of AR technology we introduce Augmented Reality Student Card (ARSC) as an application of…

  10. Prototype of an Augmented Reality User Manual App

    OpenAIRE

    Palm, Fredrik; Källström, Filip

    2014-01-01

    This thesis describes how augmented reality can be used when developing an instructional application. After studying augmented reality apps and papers, a prototype for mobile devices was developed to discover the possibilities that augmented reality offers and show how issues inherent to the technology can be solved. The app was developed with usability in mind, with consideration for how well suited each feature was for augmented reality. Our results show that it is possible to use augmented...

  11. Synthesis and antimicrobial activity of squalamine analogue.

    Science.gov (United States)

    Kim, H S; Choi, B S; Kwon, K C; Lee, S O; Kwak, H J; Lee, C H

    2000-08-01

    Synthesis and antimicrobial activity of squalamine analogue 2 are reported. The synthesis of 2 was accomplished from bisnoralcohol 3. The spermidine moiety was introduced via reductive amination of an appropriately functionalized 3beta-aminosterol with spermidinyl aldehyde 17 utilizing sodium triacetoxyborohydride as the reducing agent. Compound 2 shows weaker antimicrobial activity than squalamine. PMID:11003150

  12. Somatostatin analogue scintigraphy and tuberculosis: case report

    International Nuclear Information System (INIS)

    Scintigraphy using a radiolabelled somatostatin analogue (111 In-pentetreotide) is useful in the detection of neuroendocrine tumors. But this radiopharmaceutical accumulates also in solid tumours or in inflammatory diseases such as granulomatosis. We present a case of 111 In-pentetreotide uptake in a tuberculous adenopathy. (author)

  13. Prussian Blue Analogues of Reduced Dimensionality

    NARCIS (Netherlands)

    Gengler, Regis Y. N.; Toma, Luminita M.; Pardo, Emilio; Lloret, Francesc; Ke, Xiaoxing; Van Tendeloo, Gustaaf; Gournis, Dimitrios; Rudolf, Petra

    2012-01-01

    Mixed-valence polycyanides (Prussian Blue analogues) possess a rich palette of properties spanning from room-temperature ferromagnetism to zero thermal expansion, which can be tuned by chemical modifications or the application of external stimuli (temperature, pressure, light irradiation). While mol

  14. The glaciogenic reservoir analogue studies project (GRASP)

    DEFF Research Database (Denmark)

    Moscariello, A.; Moreau, Julien; Vegt, P. van der;

    increasing the risk associated with developing effectively these reservoirs. Therefore a analogue-based predictive stratigraphical and sedimentological model can help to steer drilling strategy and reduce uncertainties and associated risks. For this purpose the GRASP joint industry programme was established...

  15. Phosphate analogues in the dissection of mechanism.

    OpenAIRE

    Heidi J. Korhonen; Conway, Louis P.; Hodgson, David R. W.

    2014-01-01

    Phosphoryl group transfer is central to genetic replication, cellular signalling and many metabolic processes. Understanding the mechanisms of phosphorylation and phosphate ester and anhydride cleavage is key to efforts towards biotechnological and biomedical exploitation of phosphate-handling enzymes. Analogues of phosphate esters and anhydrides are indispensable tools, alongside protein mutagenesis and computational methods, for the dissection of phosphoryl transfer mechanisms. Hydrolysable...

  16. Augment-type two stage accelerator

    International Nuclear Information System (INIS)

    When a flying body accelerated by a gas gun at a first stage enters into an augment rail passing through an introduction tube, an ignition capacitor for initial plasmas is turned ON to apply a voltage between the augment rails. Subsequently, the accelerating gas present behind the flying body is formed into plasmas by a laser, to flow electric current from one of the inner augment rails → plasma armature → the other of the inner augment rails, and additionally accelerate the flying body by Lorentz force formed in this case. Since the plasmas are maintained in a state of higher density than the plasmas obtained by using all of the augment rails, the ignition capacitor for initial plasmas in switched to a power source. As a result, it is possible to flow the maximum current before the plasmas expand, and a large accelerating force and a high magnetic flux density are attained, to improve acceleration performance of the flying body. (N.H.)

  17. Irradiated homologous costal cartilage for augmentation rhinoplasty

    Energy Technology Data Exchange (ETDEWEB)

    Lefkovits, G. (Lenox Hill Hospital, New York, NY (USA))

    1990-10-01

    Although the ideal reconstructive material for augmentation rhinoplasty continues to challenge plastic surgeons, there exists no report in the literature that confines the use of irradiated homologous costal cartilage, first reported by Dingman and Grabb in 1961, to dorsal nasal augmentation. The purpose of this paper is to present a retrospective analysis of the author's experience using irradiated homologous costal cartilage in augmentation rhinoplasty. Twenty-seven dorsal nasal augmentations were performed in 24 patients between 16 and 49 years of age with a follow-up ranging from 1 to 27 months. Good-to-excellent results were achieved in 83.3% (20 of 24). Poor results requiring revision were found in 16.7% (4 of 24). Complication rates included 7.4% infection (2 of 27) and 14.8% warping (4 of 27). The resorption rate was zero. These results compare favorably with other forms of nasal augmentation. Advantages and disadvantages of irradiated homologous costal cartilage are discussed.

  18. The transareolar incision for breast augmentation revisited.

    Science.gov (United States)

    Kompatscher, Peter; Schuler, Christine; Beer, Gertrude M

    2004-01-01

    Of the various possible incisions for breast augmentation, the transareolar access has gained only limited popularity. The potential side effects of this incision are said to be altered nipple sensation, impaired lactation, an increased rate of infections with capsular fibrosis, well visible scar formation with hypopigmentation, and the need for an additional access in case a breast ptosis correction should prove necessary at a later date. The purpose of this retrospective study was to judge advantages and limitations of transareolar breast augmentation, and to verify whether the reluctant attitude toward this surgical approach is justified. A sample of 18 patients with a transareolar, retropectoral breast augmentation was selected for a retrospective evaluation. The suitability of the technique in general was examined together with early postoperative complications, sensory changes, and late complications on the basis of an evaluation system for cosmetic surgical results. The study showed that only women with an areolar diameter of 3.5 cm or more without pronounced breast ptosis were suitable for the transareolar access. No early infections were noted. The rate of capsular fibrosis was 11%. Two years after breast augmentation, 16 women (89%) judged their breast sensation to be normal, but objective assessment showed that mean pressure and vibration sensation were moderately compromised in all parts of the breast. The scars were of good quality, with very little hypopigmentation. With appropriate patient selection, respecting the advantages and limitations, the transareolar incision has its definite place among the different incisions for breast augmentation. PMID:15164231

  19. [Dmt(1)]DALDA analogues modified with tyrosine analogues at position 1.

    Science.gov (United States)

    Cai, Yunxin; Lu, Dandan; Chen, Zhen; Ding, Yi; Chung, Nga N; Li, Tingyou; Schiller, Peter W

    2016-08-01

    Analogues of [Dmt(1)]DALDA (H-Dmt-d-Arg-Phe-Lys-NH2; Dmt=2',6'-dimethyltyrosine), a potent μ opioid agonist peptide with mitochondria-targeted antioxidant activity were prepared by replacing Dmt with various 2',6'-dialkylated Tyr analogues, including 2',4',6'-trimethyltyrosine (Tmt), 2'-ethyl-6'-methyltyrosine (Emt), 2'-isopropyl-6'-methyltyrosine (Imt) and 2',6'-diethyltyrosine (Det). All compounds were selective μ opioid agonists and the Tmt(1)-, Emt(1) and Det(1)-analogues showed subnanomolar μ opioid receptor binding affinities. The Tmt(1)- and Emt(1)-analogues showed improved antioxidant activity compared to the Dmt(1)-parent peptide in the DPPH radical-scavenging capacity assay, and thus are of interest as drug candidates for neuropathic pain treatment.

  20. [Dmt(1)]DALDA analogues modified with tyrosine analogues at position 1.

    Science.gov (United States)

    Cai, Yunxin; Lu, Dandan; Chen, Zhen; Ding, Yi; Chung, Nga N; Li, Tingyou; Schiller, Peter W

    2016-08-01

    Analogues of [Dmt(1)]DALDA (H-Dmt-d-Arg-Phe-Lys-NH2; Dmt=2',6'-dimethyltyrosine), a potent μ opioid agonist peptide with mitochondria-targeted antioxidant activity were prepared by replacing Dmt with various 2',6'-dialkylated Tyr analogues, including 2',4',6'-trimethyltyrosine (Tmt), 2'-ethyl-6'-methyltyrosine (Emt), 2'-isopropyl-6'-methyltyrosine (Imt) and 2',6'-diethyltyrosine (Det). All compounds were selective μ opioid agonists and the Tmt(1)-, Emt(1) and Det(1)-analogues showed subnanomolar μ opioid receptor binding affinities. The Tmt(1)- and Emt(1)-analogues showed improved antioxidant activity compared to the Dmt(1)-parent peptide in the DPPH radical-scavenging capacity assay, and thus are of interest as drug candidates for neuropathic pain treatment. PMID:27301366

  1. Handling Occlusions for Robust Augmented Reality Systems

    Directory of Open Access Journals (Sweden)

    Maidi Madjid

    2010-01-01

    Full Text Available Abstract In Augmented Reality applications, the human perception is enhanced with computer-generated graphics. These graphics must be exactly registered to real objects in the scene and this requires an effective Augmented Reality system to track the user's viewpoint. In this paper, a robust tracking algorithm based on coded fiducials is presented. Square targets are identified and pose parameters are computed using a hybrid approach based on a direct method combined with the Kalman filter. An important factor for providing a robust Augmented Reality system is the correct handling of targets occlusions by real scene elements. To overcome tracking failure due to occlusions, we extend our method using an optical flow approach to track visible points and maintain virtual graphics overlaying when targets are not identified. Our proposed real-time algorithm is tested with different camera viewpoints under various image conditions and shows to be accurate and robust.

  2. Recent advances in topoisomerase I-targeting agents, camptothecin analogues.

    Science.gov (United States)

    Kim, Dae-Kee; Lee, Namkyu

    2002-12-01

    The present review concentrates on camptothecin (CPT) analogues, the most extensively studied topoisomerase I (topo I) inhibitors, and provides concise information on the structural features of human topo I enzyme, mechanisms of interaction of CPT with topo I, structure-activity relationship study of CPT analogues including the influence of lactone stability on antitumor activity, and recent updates of valuable CPT analogues. PMID:12370044

  3. Resonance frequency analysis of implant stability in augmented and non-augmented sinus sites

    Directory of Open Access Journals (Sweden)

    Amir Moeintaghavi

    2015-12-01

    Full Text Available Background and aim:  Although there have been substantial developments in dental implant therapies, achieving good implant stability (ISQ >60 for implants inserted in augmented sinus sites appears to be challenging in comparison with non-augmented sites due to the high prevalence of bone resorption in posterior regions of maxilla. This study aimed to evaluate and compare the time required to achieve good implant stability between implants inserted in sites that had undergone a sinus augmentation procedure with implants inserted in non-augmented similar regions of maxilla. Methods: Thirty Stroman ITI Dental Implants were inserted in 14 patients (8 females and 6 males with average age of 55 ± 10 years. Fourteen implants were inserted in sinus augmented sites (open sinus elevation and Demineralized Freezed Bone Allograft  or DFDBA 6 months after healing (test group, and 16 implants were inserted into non-augmented  posterior areas of maxilla (control group. The implant stability quotient (ISQ for each implant was measured at the time of insertion (baseline, ISQ0 and at 1, 2 and 3 months later (ISQ1, ISQ2, ISQ3. Residual and augmented bone heights were also recorded. Results: The average residual bone height was 2.92 ± 0.63mm and 10.41 ± 1.46mm for the augmented bone height. The difference between ISQ values in the test and control groups was only significant at the baseline (p=0.023. No significant correlation was found between ISQ and bone height (residual and augmented, and there was no significant correlation between ISQ values and the implant diameter and length. In the test group, the differences between ISQ0 and ISQ1, ISQ1 and ISQ3 and ISQ2 and ISQ3 were all statistically significant (p=0.006, p=0.032, p=0.046. In the control group, the difference was only significant between ISQ0 and ISQ1 (p=0.002. Conclusion:  ISQ values were not statistically significant between implants inserted in natural and augmented bone six months after sinus

  4. Medical imaging and augmented reality. Proceedings

    Energy Technology Data Exchange (ETDEWEB)

    Dohi, Takeyoshi [Tokyo Univ. (Japan). Dept. of Mechano-Informatics; Sakuma, Ichiro [Tokyo Univ. (Japan). Dept. of Precision Engineering; Liao, Hongen (eds.) [Tokyo Univ. (Japan). Dept. of Bioengineering

    2008-07-01

    This book constitutes the refereed proceedings of the 4th International Workshop on Medical Imaging and Augmented Reality, MIAR 2008, held in Tokyo, Japan, in August 2008. The 44 revised full papers presented together with 3 invited papers were carefully reviewed and selected from 90 submissions. The papers are organized in topical sections on surgical planning and simulation, medical image computing, image analysis, shape modeling and morphometry, image-guided robotics, image-guided intervention, interventional imaging, image registration, augmented reality, and image segmentation. (orig.)

  5. Flap-augmented shrouds for aerogenerators

    Science.gov (United States)

    Seginer, A.

    1976-01-01

    Axisymmetrical shrouds for windmills are augmented by ring-shaped 'flaps' and their performance is studied experimentally. The concept of the shroud as an annular 'wing' is justified, leading to the conclusion that high-lift techniques should be used in shroud design, and that high-lift devices, such as flaps, would increase the power output of the windmill. It is shown experimentally that the ideal power output of a flap-augmented shrouded turbine can be more than 4 times the power of unshrouded turbines of the same diameter.

  6. Minimal inframammary incision for breast augmentation

    Science.gov (United States)

    Fanous, Nabil; Tawilé, Caroline; Brousseau, Valérie J

    2008-01-01

    The inframammary approach in breast augmentation, still the most popular technique among plastic surgeons, has always been hampered by the undesirable appearance of its scar. The present paper describes a modified approach to inframammary augmentation with saline-filled prostheses. This approach uses a very short incision, thus resulting in a much less noticeable scar. The surgical technique is easy to learn, simple to execute, does not necessitate any special equipment and gives consistent results. Decreasing the scar length to an absolute minimum ensures higher patient and surgeon satisfaction. PMID:19554159

  7. Augmented Reality -tuki paikannukseen perustuvaan palveluun

    OpenAIRE

    Hautamäki, Jaakko

    2013-01-01

    Työn aiheena oli kehittää paikannukseen perustuva Augmented Reality sovellus Android-käyttöjärjestelmälle. Käyttäjä opastetaan lisättyä todellisuutta apuna käyttäen perille valituille kohteille. Sovellus tulee toimimaan osana toimeksiantajan kehittämää mobiiliohjelmistoa. Augmented Reality eli lisätty todellisuus yhdistää todellisen ja virtuaalisen ympäristön interaktiiviseksi kokemukseksi. Lisättyä todellisuutta tarkastellaan työssä lähinnä sovelluskehittäjän, mobiilisovellusten ja oman ...

  8. Towards Wearable Gaze Supported Augmented Cognition

    DEFF Research Database (Denmark)

    Toshiaki Kurauchi, Andrew; Hitoshi Morimoto, Carlos; Mardanbeigi, Diako;

    Augmented cognition applications must deal with the problem of how to exhibit information in an orderly, understandable, and timely fashion. Though context have been suggested to control the kind, amount, and timing of the information delivered, we argue that gaze can be a fundamental tool...... by the wearable computing community to develop a gaze supported augmented cognition application with three interaction modes. The application provides information of the person being looked at. The continuous mode updates information every time the user looks at a different face. The key activated discrete mode...

  9. A Survey on Applications of Augmented Reality

    Directory of Open Access Journals (Sweden)

    Andrea Sanna

    2016-01-01

    Full Text Available The term Augmented Reality (AR refers to a set of technologies and devices able to enhance and improve human perception, thus bridging the gap between real and virtual space. Physical and artificial objects are mixed together in a hybrid space where the user can move without constraints. This mediated reality is spread in our everyday life: work, study, training, relaxation, time spent traveling are just some of the moments in which you can use AR applications.This paper aims to provide an overview of current technologies and future trends of augmented reality as well as to describe the main application domains, outlining benefits and open issues.

  10. An Augmented Reality Application for Art Exhibitions

    OpenAIRE

    Rodríguez Calatayud, María Nuria; Linares-Pellicer, Jordi; Heras Evangelio, David

    2015-01-01

    The exhibition Think with Your Hands offers a new way to look at illustrations and sketchbooks. It breaks the mould of a traditional show, thanks to an augmented reality project developed by UNIT experimental at Universitat Politècnica de València. This project centres on the work of Pep Carrió and Isidro Ferrer, two of Spain s most prestigious graphic designers, whose sketchbooks, objects and collages come to life when interacting with the mobile devices and augmented reality. Rodrígu...

  11. [Insulin analogues: modifications in the structure, molecular and metabolic consequences].

    Science.gov (United States)

    de Luis, D A; Romero, E

    2013-01-01

    Recombinant DNA technology has provided insulin analogues for the treatment of diabetes mellitus, with an efficacy and safety that has improved the treatment of this disease. We briefly review the principal characteristics of the insulin analogues currently available. Both rapid-acting (lispro, aspart and glulisine) and long acting (glargine and determir) insulin analogues are included in this review. We describe the pharmacology of each insulin analogue, their differences with the human insulin, the administration, indication, efficacy and safety. In addition we discussed the main controversies of the use of these insulin analogues. In particular, those related with the risk of cancer and retinopathy, and their use in pregnant women. PMID:23517895

  12. Augmenting the ADDIE Paradigm for Instructional Design

    Science.gov (United States)

    Ni, Xiaopeng; Branch, Robert Maribe

    2008-01-01

    The authors discuss topics appropriate for augmenting the ADDIE paradigm for instructional design. The topics selected are based on data from a study of working professionals who successfully completed an instructional design and technology certificate program and who identified related topics that they regarded as beneficial. The participants…

  13. Personalized augmented reality for anatomy education.

    Science.gov (United States)

    Ma, Meng; Fallavollita, Pascal; Seelbach, Ina; Von Der Heide, Anna Maria; Euler, Ekkehard; Waschke, Jens; Navab, Nassir

    2016-05-01

    Anatomy education is a challenging but vital element in forming future medical professionals. In this work, a personalized and interactive augmented reality system is developed to facilitate education. This system behaves as a "magic mirror" which allows personalized in-situ visualization of anatomy on the user's body. Real-time volume visualization of a CT dataset creates the illusion that the user can look inside their body. The system comprises a RGB-D sensor as a real-time tracking device to detect the user moving in front of a display. In addition, the magic mirror system shows text information, medical images, and 3D models of organs that the user can interact with. Through the participation of 7 clinicians and 72 students, two user studies were designed to respectively assess the precision and acceptability of the magic mirror system for education. The results of the first study demonstrated that the average precision of the augmented reality overlay on the user body was 0.96 cm, while the results of the second study indicate 86.1% approval for the educational value of the magic mirror, and 91.7% approval for the augmented reality capability of displaying organs in three dimensions. The usefulness of this unique type of personalized augmented reality technology has been demonstrated in this paper. PMID:26646315

  14. Mobile-based tourism as spatial augmentation

    DEFF Research Database (Denmark)

    Sandvik, Kjetil

    By discussing the uses of mobile information mainly for tourism purposes, I argue that the consequence of the use of mobile technologies is neither a collapse nor a doubling of space and place. Rather they are producing new types of places and new types of spatial experiences. In short, mobile...... technologies facilitate an augmentation of space...

  15. Personalized augmented reality for anatomy education.

    Science.gov (United States)

    Ma, Meng; Fallavollita, Pascal; Seelbach, Ina; Von Der Heide, Anna Maria; Euler, Ekkehard; Waschke, Jens; Navab, Nassir

    2016-05-01

    Anatomy education is a challenging but vital element in forming future medical professionals. In this work, a personalized and interactive augmented reality system is developed to facilitate education. This system behaves as a "magic mirror" which allows personalized in-situ visualization of anatomy on the user's body. Real-time volume visualization of a CT dataset creates the illusion that the user can look inside their body. The system comprises a RGB-D sensor as a real-time tracking device to detect the user moving in front of a display. In addition, the magic mirror system shows text information, medical images, and 3D models of organs that the user can interact with. Through the participation of 7 clinicians and 72 students, two user studies were designed to respectively assess the precision and acceptability of the magic mirror system for education. The results of the first study demonstrated that the average precision of the augmented reality overlay on the user body was 0.96 cm, while the results of the second study indicate 86.1% approval for the educational value of the magic mirror, and 91.7% approval for the augmented reality capability of displaying organs in three dimensions. The usefulness of this unique type of personalized augmented reality technology has been demonstrated in this paper.

  16. Location-Based Learning through Augmented Reality

    Science.gov (United States)

    Chou, Te-Lien; Chanlin, Lih-Juan

    2014-01-01

    A context-aware and mixed-reality exploring tool cannot only effectively provide an information-rich environment to users, but also allows them to quickly utilize useful resources and enhance environment awareness. This study integrates Augmented Reality (AR) technology into smartphones to create a stimulating learning experience at a university…

  17. Intelligent Augmented Reality Training for Motherboard Assembly

    Science.gov (United States)

    Westerfield, Giles; Mitrovic, Antonija; Billinghurst, Mark

    2015-01-01

    We investigate the combination of Augmented Reality (AR) with Intelligent Tutoring Systems (ITS) to assist with training for manual assembly tasks. Our approach combines AR graphics with adaptive guidance from the ITS to provide a more effective learning experience. We have developed a modular software framework for intelligent AR training…

  18. Design Principles for Augmented Reality Learning

    Science.gov (United States)

    Dunleavy, Matt

    2014-01-01

    Augmented reality is an emerging technology that utilizes mobile, context-aware devices (e.g., smartphones, tablets) that enable participants to interact with digital information embedded within the physical environment. This overview of design principles focuses on specific strategies that instructional designers can use to develop AR learning…

  19. Augmented reality for Android application development

    CERN Document Server

    Grubert, Jens

    2013-01-01

    A step-by-step tutorial-based guide aimed at giving you hands-on practical experience to develop AR applications for Android.Augmented Reality for Android Application Development is for Android mobile application developers who are familiar with Android Development Tools and deployment, JMonkeyEngine, and the Vuforia SDK.

  20. Get Real: Augmented Reality for the Classroom

    Science.gov (United States)

    Mitchell, Rebecca; DeBay, Dennis

    2012-01-01

    Kids love augmented reality (AR) simulations because they are like real-life video games. AR simulations allow students to learn content while collaborating face to face and interacting with a multimedia-enhanced version of the world around them. Although the technology may seem advanced, AR software makes it easy to develop content-based…

  1. CARE: Creating Augmented Reality in Education

    Science.gov (United States)

    Latif, Farzana

    2012-01-01

    This paper explores how Augmented Reality using mobile phones can enhance teaching and learning in education. It specifically examines its application in two cases, where it is identified that the agility of mobile devices and the ability to overlay context specific resources offers opportunities to enhance learning that would not otherwise exist.…

  2. Augmentation of board games using smartphones

    DEFF Research Database (Denmark)

    Kulsinskas, Arturas; Balan, Catalin; Egede Bukdahl, Nicholas;

    2015-01-01

    This paper contains details about research into the effect of digital augmentation on social presence in board games. A case study of the board game Tobago was performed during the project and a prototype application for smartphones was developed in order to compare the players’ social presence i...

  3. MULTILEVEL AUGMENTATION METHODS FOR SOLVING OPERATOR EQUATIONS

    Institute of Scientific and Technical Information of China (English)

    Chen Zhongying; Wu Bin; Xu Yuesheng

    2005-01-01

    We introduce multilevel augmentation methods for solving operator equations based on direct sum decompositions of the range space of the operator and the solution space of the operator equation and a matrix splitting scheme. We establish a general setting for the analysis of these methods, showing that the methods yield approximate solutions of the same convergence order as the best approximation from the subspace. These augmentation methods allow us to develop fast, accurate and stable nonconventional numerical algorithms for solving operator equations. In particular, for second kind equations, special splitting techniques are proposed to develop such algorithms. These algorithms are then applied to solve the linear systems resulting from matrix compression schemes using wavelet-like functions for solving Fredholm integral equations of the second kind. For this special case, a complete analysis for computational complexity and convergence order is presented. Numerical examples are included to demonstrate the efficiency and accuracy of the methods. In these examples we use the proposed augmentation method to solve large scale linear systems resulting from the recently developed wavelet Galerkin methods and fast collocation methods applied to integral equations of the secondkind. Our numerical results confirm that this augmentation method is particularly efficient for solving large scale linear systems induced from wavelet compression schemes.

  4. Temporal Coherence Strategies for Augmented Reality Labeling

    DEFF Research Database (Denmark)

    Madsen, Jacob Boesen; Tatzgern, Markus; Madsen, Claus B.;

    2016-01-01

    Temporal coherence of annotations is an important factor in augmented reality user interfaces and for information visualization. In this paper, we empirically evaluate four different techniques for annotation. Based on these findings, we follow up with subjective evaluations in a second experiment...

  5. Introduction to augmented and virtual reality

    Science.gov (United States)

    Caudell, Thomas P.

    1995-12-01

    This paper introduces the field of augmented reality as a prolog to the body of papers in the remainder of this session. I describe the use of head-mounted display technologies to improve the efficiency and quality of human workers in their performance of engineering design, manufacturing, construction, testing, and maintenance activities. This technology is used to `augment' the visual field of the wearer with information necessary in the performance of the current task. The enabling technology is head-up (see-through) display head sets (HUDsets) combined with head position sensing, real world registration systems, and database access software. A primary difference between virtual reality (VR) and `augmented reality' (AR) is in the complexity of the perceived graphical objects. In AR systems, only simple wire frames, template outlines, designators, and text is displayed. An immediate result of this difference is that augmented reality systems can be driven by standard and inexpensive microprocessors. Many research issues must be addressed before this technology can be widely used, including tracking and registration, human 3D perception and reasoning, and human task performance issues.

  6. Aloqa and layar augmented reality feeds

    NARCIS (Netherlands)

    Ternier, Stefaan

    2010-01-01

    Aloqa is a service that proactively notifies the user of Point Of Interests (POIs). It runs on iPhone, blackberry and android. With this tool you can easily get directions to events, places, buildings or other places of interests. Layar builds on the same principle, but has a browser that augments t

  7. ARTree. Designing & evaluating handheld augmented reality art

    OpenAIRE

    Nordbø, Tone

    2011-01-01

    Augmented reality is a technology combining physical and virtual objects. This study aimes to explore the use of this technology in art. The prototype ARTree was developed through contributions from an artist, and consists of a physical tree and virtual objects representing the four seasons. A qualitative usability test was conducted where ...

  8. Holographic Fluids with Vorticity and Analogue Gravity

    CERN Document Server

    Leigh, Robert G; Petropoulos, P Marios

    2012-01-01

    We study holographic three-dimensional fluids with vorticity in local equilibrium and discuss their relevance to analogue gravity systems. The Fefferman-Graham expansion leads to the fluid's description in terms of a comoving and rotating Papapetrou-Randers frame. A suitable Lorentz transformation brings the fluid to the non-inertial Zermelo frame, which clarifies its interpretation as moving media for light/sound propagation. We apply our general results to the Lorentzian Kerr-AdS_4 and Taub-NUT-AdS_4 geometries that describe fluids in cyclonic and vortex flows respectively. In the latter case we associate the appearance of closed timelike curves to analogue optical horizons. In addition, we derive the classical rotational Hall viscosity of three-dimensional fluids with vorticity. Our formula remarkably resembles the corresponding result in magnetized plasmas.

  9. Design and synthesis of new fluconazole analogues.

    Science.gov (United States)

    Pore, Vandana S; Agalave, Sandip G; Singh, Pratiksha; Shukla, Praveen K; Kumar, Vikash; Siddiqi, Mohammad I

    2015-06-21

    We have synthesized new fluconazole analogues containing two different 1,2,3-triazole units in the side chain. The synthesis of new amide analogues using a variety of acids is also described. All the compounds showed very good antifungal activity. A hemolysis study of the most active compounds 6e and 13j showed that both compounds did not cause any hemolysis at the dilutions tested. These compounds did not exhibit any toxicity to L929 cells at MIC and lower concentrations. In the docking study, the overall binding mode of 6e and 13j appeared to be reasonable and provided a good insight into the structural basis of inhibition of Candida albicans Cyp51 by these compounds. PMID:25975803

  10. Somatostatin analogues for acute bleeding oesophageal varices

    DEFF Research Database (Denmark)

    Gøtzsche, Peter C.; Hrobjartsson, A.

    2008-01-01

    BACKGROUND: Somatostatin and its derivatives are sometimes used for emergency treatment of bleeding oesophageal varices in patients with cirrhosis of the liver. OBJECTIVES: To study whether somatostatin or its analogues improve survival or reduce the need for blood transfusions in patients...... with bleeding oesophageal varices. SEARCH STRATEGY: PubMed and The Cochrane Library were searched (November 2007). Reference lists of publications, contacts with authors. SELECTION CRITERIA: All randomised trials comparing somatostatin or analogues with placebo or no treatment in patients suspected of acute...... or recent bleeding from oesophageal varices. DATA COLLECTION AND ANALYSIS: The outcome measures extracted were: mortality, blood transfusions, use of balloon tamponade, initial haemostasis and rebleeding. Intention-to-treat analyses including all randomised patients were conducted if possible; a random...

  11. Studies of natural analogues and geological systems

    International Nuclear Information System (INIS)

    This review has involved studies of natural analogues and natural geological systems leading to the identification and quantification of processes and features of importance to the performance and safety of repositories for radioactive waste. The features and processes selected for the study comprise general geochemical issues related to the performance of the near- and far-field, the performance and durability of construction materials and the effects of glaciation. For each of these areas a number of potentially important processes for repository performance have been described, and evidence for their existence, as well as quantification of parameters of models describing the processes have been sought from major natural analogue studies and site investigations. The review has aimed at covering a relatively broad range of issues at the expense of in-depth analysis. The quantitative data presented are in most cases compilations of data from the literature; in a few cases results of evaluations made within the current project are included

  12. SYNTHESIS AND BIOEVALUATION OF KETOCONAZOLE THIOSEMICARBAZONE ANALOGUES

    OpenAIRE

    Y. Murti

    2011-01-01

    Ketoconazole (KTZ) is a synthetic antifungal drug used to prevent and treat fungal infections, especially in immunocompromised patients such as those with AIDS. Resistance to ketoconazole has been observed in a number of clinical fungal isolates, including C. albicans. Thus new effective agents with less toxicity against fungal infection are urgently required. With this view, ketoconazole thiosemicarbazone analogues (Compounds 1-10) were synthesized wherein condensation of different thiosemic...

  13. Electromagnetic wave analogue of electronic diode

    OpenAIRE

    Shadrivov, Ilya V.; Powell, David A.; Kivshar, Yuri S.; Fedotov, Vassili A.; Zheludev, Nikolay I.

    2010-01-01

    An electronic diode is a nonlinear semiconductor circuit component that allows conduction of electrical current in one direction only. A component with similar functionality for electromagnetic waves, an electromagnetic isolator, is based on the Faraday effect of the polarization state rotation and is also a key component of optical and microwave systems. Here we demonstrate a chiral electromagnetic diode, which is a direct analogue of an electronic diode: its functionality is underpinned by ...

  14. Applying Acylated Fucose Analogues to Metabolic Glycoengineering

    OpenAIRE

    Julia Rosenlöcher; Verena Böhrsch; Michael Sacharjat; Véronique Blanchard; Christoph Giese; Volker Sandig; Christian P R Hackenberger; Stephan Hinderlich

    2015-01-01

    Manipulations of cell surface glycosylation or glycan decoration of selected proteins hold immense potential for exploring structure-activity relations or increasing glycoprotein quality. Metabolic glycoengineering describes the strategy where exogenously supplied sugar analogues intercept biosynthetic pathways and are incorporated into glycoconjugates. Low membrane permeability, which so far limited the large-scale adaption of this technology, can be addressed by the introduction of acylated...

  15. The Brookhaven electron analogue, 1953--1957

    Energy Technology Data Exchange (ETDEWEB)

    Plotkin, M.

    1991-12-18

    The following topics are discussed on the Brookhaven electron analogue: L.J. Haworth and E.L. VanHorn letters; Original G.K. Green outline for report; General description; Parameter list; Mechanical Assembly; Alignment; Degaussing; Vacuum System; Injection System; The pulsed inflector; RF System; Ferrite Cavity; Pick-up electrodes and preamplifiers; Radio Frequency power amplifier; Lens supply; Controls and Power; and RF acceleration summary.

  16. Instructional influences on analogue functional analysis outcomes.

    OpenAIRE

    Northup, John; Kodak, Tiffany; Grow, Laura; Lee, Jennifer; Coyne, Amanda

    2004-01-01

    Analogue assessments were conducted with a common contingency (escape from tasks) that varied only by three different instructions describing the contingency. In one condition, the contingency was described as "taking a break," in another condition it was described as "time-out," and no description of the contingency was provided in a third condition. The participant was a typically developing 5-year-old child with a diagnosis of attention deficit hyperactivity disorder. Rates of inappropriat...

  17. Analogue memories for high speed detectors signals

    CERN Document Server

    Caponetto, L H

    2000-01-01

    An analogue memory chip family has been developed as a switched capacitor cell array. The family is an ongoing prototyping project within the readout system of the silicon drift detectors for the Inner Tracker System of the ALICE experiment. All chips consist of several capturing channels whose cells number is varying within the family. Chips design choices and performances are briefly discussed here. (5 refs).

  18. Synthesis of a Cyclic Analogue of Galardin

    Institute of Scientific and Technical Information of China (English)

    马大为; 吴问根; 钱静; 郎深慧; 叶其壮

    2001-01-01

    A cyclic analogue 4 of galardin,a known MMP inhibitor,is designed to improve its selectivity.The synthesis of 4starts from dimethyl(S)-malate using diaselective alkylation and subsequent cyclization and amide formation as key steps.The compound 4 showed MMP inhibitory activity on all MMPs tested with IC50 ranging from 20.1 μM to 104 μM.

  19. The Brookhaven electron analogue, 1953--1957

    International Nuclear Information System (INIS)

    The following topics are discussed on the Brookhaven electron analogue: L.J. Haworth and E.L. VanHorn letters; Original G.K. Green outline for report; General description; Parameter list; Mechanical Assembly; Alignment; Degaussing; Vacuum System; Injection System; The pulsed inflector; RF System; Ferrite Cavity; Pick-up electrodes and preamplifiers; Radio Frequency power amplifier; Lens supply; Controls and Power; and RF acceleration summary

  20. Platinum analogues in preclinical and clinical development.

    Science.gov (United States)

    Hamilton, T C; O'Dwyer, P J; Ozols, R F

    1993-11-01

    The impact of cisplatin on chemotherapy for solid tumors has led to the synthesis of many molecules with platinum as their central building block. These so-called platinum analogues have been developed with the obvious goals of improving the antitumor activity of cisplatin and hopefully, at the same time, altering the dose-limiting side effects of the prototype drug. At least 10 such molecules are in clinical development, whereas several others are at various stages of preclinical testing. PMID:8305533

  1. h-analogue of Fibonacci Numbers

    OpenAIRE

    Benaoum, H. B.

    2009-01-01

    In this paper, we introduce the h-analogue of Fibonacci numbers for non-commutative h-plane. For h h'= 1 and h = 0, these are just the usual Fibonacci numbers as it should be. We also derive a collection of identities for these numbers. Furthermore, h-Binet's formula for the h-Fibonacci numbers is found and the generating function that generates these numbers is obtained.

  2. Thymidine Analogues for Tracking DNA Synthesis

    Directory of Open Access Journals (Sweden)

    Brenton L. Cavanagh

    2011-09-01

    Full Text Available Replicating cells undergo DNA synthesis in the highly regulated, S-phase of the cell cycle. Analogues of the pyrimidine deoxynucleoside thymidine may be inserted into replicating DNA, effectively tagging dividing cells allowing their characterisation. Tritiated thymidine, targeted using autoradiography was technically demanding and superseded by 5-bromo-2-deoxyuridine (BrdU and related halogenated analogues, detected using antibodies. Their detection required the denaturation of DNA, often constraining the outcome of investigations. Despite these limitations BrdU alone has been used to target newly synthesised DNA in over 20,000 reviewed biomedical studies. A recent breakthrough in “tagging DNA synthesis” is the thymidine analogue 5-ethynyl-2′-deoxyuridine (EdU. The alkyne group in EdU is readily detected using a fluorescent azide probe and copper catalysis using ‘Huisgen’s reaction’ (1,3-dipolar cycloaddition or ‘click chemistry’. This rapid, two-step biolabelling approach allows the tagging and imaging of DNA within cells whilst preserving the structural and molecular integrity of the cells. The bio-orthogonal detection of EdU allows its application in more experimental assays than previously possible with other “unnatural bases”. These include physiological, anatomical and molecular biological experimentation in multiple fields including, stem cell research, cancer biology, and parasitology. The full potential of EdU and related molecules in biomedical research remains to be explored.

  3. Motion in Augmented Reality Games: An Engine for Creating Plausible Physical Interactions in Augmented Reality Games

    OpenAIRE

    Brian Mac Namee; David Beaney; Qingqing Dong

    2010-01-01

    The next generation of Augmented Reality (AR) games will require real and virtual objects to coexist in motion in immersive game environments. This will require the illusion that real and virtual objects interact physically together in a plausible way. The Motion in Augmented Reality Games (MARG) engine described in this paper has been developed to allow these kinds of game environments. The paper describes the design and implementation of the MARG engine and presents two pr...

  4. 3D photography in the objective analysis of volume augmentation including fat augmentation and dermal fillers.

    Science.gov (United States)

    Meier, Jason D; Glasgold, Robert A; Glasgold, Mark J

    2011-11-01

    The authors present quantitative and objective 3D data from their studies showing long-term results with facial volume augmentation. The first study analyzes fat grafting of the midface and the second study presents augmentation of the tear trough with hyaluronic filler. Surgeons using 3D quantitative analysis can learn the duration of results and the optimal amount to inject, as well as showing patients results that are not demonstrable with standard, 2D photography. PMID:22004863

  5. The role of imaging in pediatric bladder augmentation

    Energy Technology Data Exchange (ETDEWEB)

    Breen, Micheal; Chow, Jeanne S. [Boston Children' s Hospital, Department of Radiology, Boston, MA (United States); Phelps, Andrew [UCSF Benioff Children' s Hospital San Francisco, Department of Radiology and Biomedical Imaging, San Francisco, CA (United States); Estrada, Carlos [Boston Children' s Hospital, Department of Urology, Boston, MA (United States)

    2015-09-15

    Bladder augmentation (also called augmentation cystoplasty) refers to a number of surgical methods that increase the capacity and compliance of the urinary bladder. Imaging has an important role in the postoperative evaluation of bladder augmentation. The most common augmentation procedures utilize enteric segments to augment the bladder. The various types of bladder augmentation have characteristic appearances on different imaging modalities. Spontaneous bladder perforation is a complication that is seen in both early and late post-operative periods and it is one of the most important complications for radiologists to be aware of as it is life-threatening. We review the indications for bladder augmentation in children, the surgical techniques employed, the normal postoperative appearances on imaging studies and the role of imaging complications of bladder augmentation including delayed spontaneous bladder rupture, which is life-threatening. (orig.)

  6. Analogue to Digital and Digital to Analogue Converters (ADCs and DACs): A Review Update

    CERN Document Server

    Pickering, J

    2015-01-01

    This is a review paper updated from that presented for CAS 2004. Essentially, since then, commercial components have continued to extend their performance boundaries but the basic building blocks and the techniques for choosing the best device and implementing it in a design have not changed. Analogue to digital and digital to analogue converters are crucial components in the continued drive to replace analogue circuitry with more controllable and less costly digital processing. This paper discusses the technologies available to perform in the likely measurement and control applications that arise within accelerators. It covers much of the terminology and 'specmanship' together with an application-oriented analysis of the realisable performance of the various types. Finally, some hints and warnings on system integration problems are given.

  7. Current concepts on complications associated with sinus augmentation procedures

    NARCIS (Netherlands)

    P. Boffano; T. Forouzanfar

    2014-01-01

    The sinus augmentation, or sinus lift procedure, is an internal augmentation of the maxillary sinus, which is intended to increase the vertical bony dimension in the lateral maxilla to make the placement of dental implants possible. Complication rate associated with maxillary sinus augmentation proc

  8. Augmented Reality and ARToolkit for Android: the First Steps

    Directory of Open Access Journals (Sweden)

    Demidova Liliya

    2016-01-01

    Full Text Available The paper describes the aspects of the augmented reality application development on the base of ARToolkit for Android. The steps consistently used for the augmented reality application development have been considered. The simplest Java-based examples of augmented reality have been discussed.

  9. Detonation wave augmentation of gas turbines

    Science.gov (United States)

    Wortman, A.

    1984-01-01

    The results of a feasibility study that examined the effects of using detonation waves to augment the performance of gas turbines are reported. The central ideas were to reduce compressor requirements and to maintain high performance in jet engines. Gasdynamic equations were used to model the flows associated with shock waves generated by the detonation of fuel in detonator tubes. Shock wave attenuation to the level of Mach waves was found possible, thus eliminating interference with the compressor and the necessity of valves and seals. A preliminary parametric study of the performance of a compressor working at a 4:1 ratio in a conceptual design of a detonation wave augmented jet engine in subsonic flight indicated a clear superiority over conventional designs in terms of fuel efficiency and thrust.

  10. Camera Based Navigation System with Augmented Reality

    Directory of Open Access Journals (Sweden)

    M. Marcu

    2012-06-01

    Full Text Available Nowadays smart mobile devices have enough processing power, memory, storage and always connected wireless communication bandwidth that makes them available for any type of application. Augmented reality (AR proposes a new type of applications that tries to enhance the real world by superimposing or combining virtual objects or computer generated information with it. In this paper we present a camera based navigation system with augmented reality integration. The proposed system aims to the following: the user points the camera of the smartphone towards a point of interest, like a building or any other place, and the application searches for relevant information about that specific place and superimposes the data over the video feed on the display. When the user moves the camera away, changing its orientation, the data changes as well, in real-time, with the proper information about the place that is now in the camera view.

  11. Averaged Extended Tree Augmented Naive Classifier

    Directory of Open Access Journals (Sweden)

    Aaron Meehan

    2015-07-01

    Full Text Available This work presents a new general purpose classifier named Averaged Extended Tree Augmented Naive Bayes (AETAN, which is based on combining the advantageous characteristics of Extended Tree Augmented Naive Bayes (ETAN and Averaged One-Dependence Estimator (AODE classifiers. We describe the main properties of the approach and algorithms for learning it, along with an analysis of its computational time complexity. Empirical results with numerous data sets indicate that the new approach is superior to ETAN and AODE in terms of both zero-one classification accuracy and log loss. It also compares favourably against weighted AODE and hidden Naive Bayes. The learning phase of the new approach is slower than that of its competitors, while the time complexity for the testing phase is similar. Such characteristics suggest that the new classifier is ideal in scenarios where online learning is not required.

  12. Interactive learning environments in augmented reality technology

    Directory of Open Access Journals (Sweden)

    Rafał Wojciechowski

    2010-01-01

    Full Text Available In this paper, the problem of creation of learning environments based on augmented reality (AR is considered. The concept of AR is presented as a tool for safe and cheap experimental learning. In AR learning environments students may acquire knowledge by personally carrying out experiments on virtual objects by manipulating real objects located in real environments. In the paper, a new approach to creation of interactive educational scenarios, called Augmented Reality Interactive Scenario Modeling (ARISM, is mentioned. In this approach, the process of building learning environments is divided into three stages, each of them performed by users with different technical and domain knowledge. The ARISM approach enables teachers who are not computer science experts to create AR learning environments adapted to the needs of their students.

  13. Vertebral Augmentation: State of the Art

    Science.gov (United States)

    Nabhane, Linda; Issa El Khoury, Fouad; Kreichati, Gaby; El Rachkidi, Rami

    2016-01-01

    Osteoporotic vertebral compression fractures (OVF) are an increasing public health problem. Cement augmentation (vertebroplasty of kyphoplasty) helps stabilize painful OVF refractory to medical treatment. This stabilization is thought to improve pain and functional outcome. Vertebroplasty consists of injecting cement into a fractured vertebra using a percutaneous transpedicular approach. Balloon kyphoplasty uses an inflatable balloon prior to injecting the cement. Although kyphoplasty is associated with significant improvement of local kyphosis and less cement leakage, this does not result in long-term clinical and functional improvement. Moreover, vertebroplasty is favored by some due to the high cost of kyphoplasty. The injection of cement increases the stiffness of the fracture vertebrae. This can lead, in theory, to adjacent OVF. However, many studies found no increase of subsequent fracture when comparing medical treatment to cement augmentation. Kyphoplasty can have a protective effect due to restoration of sagittal balance. PMID:27114782

  14. Index matrices towards an augmented matrix calculus

    CERN Document Server

    Atanassov, Krassimir T

    2014-01-01

    This book presents the very concept of an index matrix and its related augmented matrix calculus in a comprehensive form. It mostly illustrates the exposition with examples related to the generalized nets and intuitionistic fuzzy sets which are examples of an extremely wide array of possible application areas. The present book contains the basic results of the author over index matrices and some of its open problems with the aim to stimulating more researchers to start working in this area.

  15. Augmentation Mammaplasty Using Implants: A Review

    Directory of Open Access Journals (Sweden)

    Susumu Takayanagi

    2012-09-01

    Full Text Available One of the techniques for augmentation mammaplasty is the procedure using implants. Eventhough this technique has been used for many years, there are still several controversial issuesto be discussed and overcome for patient safety. In this review article, capsular contracture,leak or rupture of the implants, possible systemic disease, relation with breast cancer, andrecent problems with Poly Implant Prothese implants are described and discussed.

  16. Soft tissue augmentation in dermatology - 2009 update

    Directory of Open Access Journals (Sweden)

    Michael H Gold

    2010-01-01

    Full Text Available The number of products available to dermatologists for soft tissue augmentation has grown significantly over the past several years in the US. This manuscript will review the various hyaluronic acid fillers and other Food and Drug Administration -approved products we are utilizing for our patients in the rejuvenation process. It is hoped that through this article clinicians will feel more comfortable using these products in their everyday practice of dermatology.

  17. Do transcriptional enhancers also augment DNA replication?

    OpenAIRE

    O'Connor, D T; Subramani, S

    1988-01-01

    Enhancers are DNA elements that augment transcription in cis, independent of distance and orientation. Evidence such as hormone dependent neoplastic cell growth and the stimulation of viral replication by sequences present in enhancers suggests that enhancers may also directly affect DNA replication. We tested this hypothesis in recombinant plasmids by asking whether sequences that stimulated DNA replication shared the properties of transcriptional enhancers. The homologous simian virus 40 (S...

  18. Alveolar ridge augmentation by osteoinduction in rats

    DEFF Research Database (Denmark)

    Pinholt, E M; Bang, G; Haanaes, H R

    1990-01-01

    The purpose of this study was to evaluate bone substitutes for alveolar ridge augmentation by osteoinduction. Allogenic, demineralized, and lyophilized dentin and bone was tested for osteoinductive properties in order to establish an experimental model for further studies. Implantations were...... performed subperiosteally on the premaxilla and heterotopically in the abdominal muscles of rats. Light microscopic evaluations revealed that all allogenic, demineralized, and lyophilized dentin and bone implants induced new bone formation. No inflammatory or foreign body reactions were observed....

  19. The ligament augmentation device: an historical perspective.

    Science.gov (United States)

    Kumar, K; Maffulli, N

    1999-05-01

    Anterior cruciate ligament (ACL) injury is the most common ligament injury in the knee, and a significant number of patients may develop progressive instability and disability despite aggressive rehabilitation. Various materials have been used for its reconstruction. These include autografts, allografts, prosthetic ligaments, and synthetic augmentation of the biological tissue. The concept of ligament augmentation device (LAD) arose from the observation that biological grafts undergo a phase of degeneration and loss of strength before being incorporated. The LAD is meant to protect the biological graft during this vulnerable phase. However, it provokes an inflammatory reaction in the knee, and has been found to delay maturation of autogenous graft in humans. In experimental situations, the LAD has been found to share loads in a composite graft. It has also been found to be substantially stronger than the biological graft. However, in clinical situations no significant advantages have been observed with the use of LAD to augment patellar tendon or hamstring reconstruction of the chronic ACL-deficient knee or in the acute setting to augment repair of the torn ACL. There are very few reports of the use of LAD in reconstruction of the posterior cruciate ligament, and again these do not suggest any advantage in its use. Insertion of the LAD implies the introduction of a foreign material into the knee, has been associated with complications such as reactive synovitis and effusions, and may also be associated with an increased risk of infection. At present, there is no evidence that its routine use should be advocated in uncomplicated reconstructions of the ACL using biological grafts.

  20. Enhancing human cooperation with multimodal augmented reality

    OpenAIRE

    Mertes, Christian; Dierker, Angelika; Hermann, Thomas; Hanheide, Marc; Sagerer, Gerhard

    2009-01-01

    Humans naturally use an impressive variety of ways to communicate. In this work, we investigate the possibilities of complementing these natural communication channels with artificial ones. For this, augmented reality is used as a technique to add synthetic visual and auditory stimuli to people's perception. A system for the mutual display of the gaze direction of two interactants is presented and its acceptance is shown through a study. Finally, future possibilities of promoting this novel c...

  1. Designing Augmented Reality for the Classroom

    OpenAIRE

    Cuendet, Sébastien; Bonnard, Quentin; Do-Lenh, Son; Dillenbourg, Pierre

    2012-01-01

    Augmented reality (AR) has recently received a lot of attention in education. Multiple AR systems for learning have been developed and tested through empirical studies often conducted in lab settings. While lab studies can be insightful, they leave out the complexity of a classroom environment. We developed three AR learning environments that have been used in genuine classroom contexts, some of them being now part of classroom regular practices. These systems and the learning activities they...

  2. Autologous Fat Injection for Augmented Mammoplasty

    International Nuclear Information System (INIS)

    Autologous fat injection is one of the methods utilized for augmented mammoplasty methods. In this surgical procedure, the fat for transfer is obtained from the donor site of the patient's own body by liposuction and the fat is then injected into the breast. We report here cases of three patients who underwent autologous fat injection. Two of the patients had palpable masses that were present after surgery. The serial imaging findings and surgical method of autologous fat transfer are demonstrated

  3. Augmented Reality For Museum Artifacts Visualization

    OpenAIRE

    Edmund Ng Giap Weng; Behrang Parhizkar; Lina Chai Hsiao Ping; Arash Habibi Lashkari

    2011-01-01

    Recently, advances in computer graphics and interactive techniques have increased the visual quality and field of Augmented Reality (AR) applications. Research into indoor exhibition systems associated with the use of AR technologies is getting general. This project describes an AR based system for overlaying computer generated information on the real world where museum artifacts are digitized in this project and superimposed in real scene. Furthermore, this project also presents the informat...

  4. Autologous Fat Injection for Augmented Mammoplasty

    Energy Technology Data Exchange (ETDEWEB)

    Yoon, Eul Sik; Seo, Bo Kyoung; Yi, Ann; Cho, Kyu Ran [Korea University Ansan Hospital, Ansan (Korea, Republic of)

    2008-12-15

    Autologous fat injection is one of the methods utilized for augmented mammoplasty methods. In this surgical procedure, the fat for transfer is obtained from the donor site of the patient's own body by liposuction and the fat is then injected into the breast. We report here cases of three patients who underwent autologous fat injection. Two of the patients had palpable masses that were present after surgery. The serial imaging findings and surgical method of autologous fat transfer are demonstrated

  5. Augmented reality visualization for thoracoscopic spine surgery

    Science.gov (United States)

    Sauer, Frank; Vogt, Sebastian; Khamene, Ali; Heining, Sandro; Euler, Ekkehard; Schneberger, Marc; Zuerl, Konrad; Mutschler, Wolf

    2006-03-01

    We are developing an augmented reality (AR) image guidance system in which information derived from medical images is overlaid onto a video view of the patient. The centerpiece of the system is a head-mounted display custom fitted with two miniature color video cameras that capture the stereo view of the scene. Medical graphics is overlaid onto the video view and appears firmly anchored in the scene, without perceivable time lag or jitter. We have been testing the system for different clinical applications. In this paper we discuss minimally invasive thoracoscopic spine surgery as a promising new orthopedic application. In the standard approach, the thoracoscope - a rigid endoscope - provides visual feedback for the minimally invasive procedure of removing a damaged disc and fusing the two neighboring vertebrae. The navigation challenges are twofold. From a global perspective, the correct vertebrae on the spine have to be located with the inserted instruments. From a local perspective, the actual spine procedure has to be performed precisely. Visual feedback from the thoracoscope provides only limited support for both of these tasks. In the augmented reality approach, we give the surgeon additional anatomical context for the navigation. Before the surgery, we derive a model of the patient's anatomy from a CT scan, and during surgery we track the location of the surgical instruments in relation to patient and model. With this information, we can help the surgeon in both the global and local navigation, providing a global map and 3D information beyond the local 2D view of the thoracoscope. Augmented reality visualization is a particularly intuitive method of displaying this information to the surgeon. To adapt our augmented reality system to this application, we had to add an external optical tracking system, which works now in combination with our head-mounted tracking camera. The surgeon's feedback to the initial phantom experiments is very positive.

  6. Augment-and-Conquer Negative Binomial Processes

    OpenAIRE

    Zhou, Mingyuan; Carin, Lawrence

    2012-01-01

    By developing data augmentation methods unique to the negative binomial (NB) distribution, we unite seemingly disjoint count and mixture models under the NB process framework. We develop fundamental properties of the models and derive efficient Gibbs sampling inference. We show that the gamma-NB process can be reduced to the hierarchical Dirichlet process with normalization, highlighting its unique theoretical, structural and computational advantages. A variety of NB processes with distinct s...

  7. Emergent Gravity from an Augmented Variational Principle

    CERN Document Server

    Tuveri, Matteo; Ferraris, Marco

    2016-01-01

    A direct and non-trivial link between Padmanabhan's entropy used in emergent gravity and standard GR action is established. To do that, Augmented Variational Principles (AVP) will be used. We shall discuss how this link accounts for the details of the variation of Padmanabhan's action based on gravitational entropy. It will also clarify the role of the background metric and its non-dynamical role.

  8. Multimodal augmented reality to enhance human communication

    OpenAIRE

    Mertes, Christian

    2008-01-01

    Humans naturally use an impressive variety of ways to communicate. In this work, we will investigate the possibilities of complementing these natural communication channels with artificial ones. For this, augmented reality is used as a technique to add synthetic visual and auditory stimuli to people's perception. A system for the mutual display of the gaze direction of two interactants is presented and its acceptance is shown through a study. Finally, future possibilities of promoting this no...

  9. The ligament augmentation device: an historical perspective.

    Science.gov (United States)

    Kumar, K; Maffulli, N

    1999-05-01

    Anterior cruciate ligament (ACL) injury is the most common ligament injury in the knee, and a significant number of patients may develop progressive instability and disability despite aggressive rehabilitation. Various materials have been used for its reconstruction. These include autografts, allografts, prosthetic ligaments, and synthetic augmentation of the biological tissue. The concept of ligament augmentation device (LAD) arose from the observation that biological grafts undergo a phase of degeneration and loss of strength before being incorporated. The LAD is meant to protect the biological graft during this vulnerable phase. However, it provokes an inflammatory reaction in the knee, and has been found to delay maturation of autogenous graft in humans. In experimental situations, the LAD has been found to share loads in a composite graft. It has also been found to be substantially stronger than the biological graft. However, in clinical situations no significant advantages have been observed with the use of LAD to augment patellar tendon or hamstring reconstruction of the chronic ACL-deficient knee or in the acute setting to augment repair of the torn ACL. There are very few reports of the use of LAD in reconstruction of the posterior cruciate ligament, and again these do not suggest any advantage in its use. Insertion of the LAD implies the introduction of a foreign material into the knee, has been associated with complications such as reactive synovitis and effusions, and may also be associated with an increased risk of infection. At present, there is no evidence that its routine use should be advocated in uncomplicated reconstructions of the ACL using biological grafts. PMID:10355719

  10. Labor Augmentation with Oxytocin Decreases Glutathione Level

    Directory of Open Access Journals (Sweden)

    Naomi Schneid-Kofman

    2009-01-01

    Full Text Available Objective. To compare oxidative stress following spontaneous vaginal delivery with that induced by Oxytocin augmented delivery. Methods. 98 women recruited prior to labor. 57 delivered spontaneously, while 41 received Oxytocin for augmentation of labor. Complicated deliveries and high-risk pregnancies were excluded. Informed consent was documented. Arterial cord blood gases, levels of Hematocrit, Hemoglobin, and Bilirubin were studied. Glutathione (GSH concentration was measured by a spectroscopic method. Plasma and red blood cell (RBC levels of Malondialdehyde indicated lipid peroxidation. RBC uptake of phenol red denoted cell penetrability. SPSS data analysis was used. Results. Cord blood GSH was significantly lower in the Oxytocin group (2.3±0.55 mM versus 2.55±0.55 mM, =.01. No differences were found in plasma or RBC levels of MDA or in uptake of Phenol red between the groups. Conclusion. Lower GSH levels following Oxytocin augmentation indicate an oxidative stress, though selected measures of oxidative stress demonstrate no cell damage.

  11. Ridge augmentation in an organ transplant patient.

    Science.gov (United States)

    Dalla Torre, D; Burtscher, D

    2016-05-01

    With the continuing progress in medicine, the number of successful organ transplantations has continued to increase, a fact that also concerns dentists and implantologists. Implantology after organ transplantation remains controversial due to the patient's immunocompromised situation and the corresponding risk of infection. Only a few studies on this topic have been reported, with all of them showing the dental implant success rates in transplant patients to be similar to those in healthy subjects. However, immunosuppression has been identified as a contraindication to bone augmentation. Consequently, there is still a lack of knowledge regarding pre-implantology bone grafting procedures. The following case report describes the use of ridge augmentation and extended bilateral sinus lift procedures in a liver transplant patient. The patient was treated with an implant-supported fixed prosthesis in the upper jaw and was followed up for a total of 28 months after implant insertion. According to the findings presented, pre-implantology augmentation procedures may be performed successfully in immunosuppressed organ transplant patients. Stable peri-implant conditions were shown over a period of more than 2 years. Nevertheless, further investigations are needed to define a safe treatment protocol for these high-risk patients. PMID:26711250

  12. Adaptive information design for outdoor augmented reality.

    Science.gov (United States)

    Neuhöfer, Jan A; Govaers, Felix; El Mokni, Hichem; Alexander, Thomas

    2012-01-01

    Augmented Reality focuses on the enrichment of the user's natural field of view by consistent integration of text, symbols and interactive three-dimensional objects in real time. Placing virtual objects directly into the user's view in a natural context empowers highly dynamic applications. On the other hand, this necessitates deliberate choice of information design and density, in particular for deployment in hazardous environments like military combat scenarios. As the amount of information needed is not foreseeable and strongly depends on the individual mission, an appropriate system must offer adequate adaptation capabilities. The paper presents a prototypical, vehicle-mountable Augmented Reality vision system, designed for enhancing situation awareness in stressful urban warfare scenarios. Tracking, as one of the most crucial challenges for outdoor Augmented Reality, is accomplished by means of a Differential-GPS approach while the type of display to attach can be modified, ranging from ocular displays to standard LCD mini-screens. The overall concept also includes envisioning of own troops (blue forces), for which a multi-sensor tracking approach has been chosen. As a main feature, the system allows switching between different information categories, focusing on friendly, hostile, unidentified or neutral data. Results of an empirical study on the superiority of an in-view navigation cue approach conclude the paper.

  13. Augmented spaces, a look beyond advertising

    Directory of Open Access Journals (Sweden)

    Oana Andreea Căplescu

    2014-03-01

    Full Text Available From billboards to urban screens and now to media facades, the augmentation of our cities has expanded, changing social behaviours and public space consumption. Smart buildings are being developed and, much like the smartphones, these hybrids are not only in sci-fi movies anymore. One of the main promoters of media facades and media architecture has been the advertising industry. But artists and designers showed the potential of different approaches, experimenting with digitally augmented spaces both indoors and outdoors. Going beyond the commercial aspect of being an advertising and branding tool, these hybrids offer a variety of uses. Questions of how and where we use them and how they can improve our life quality are discussed here emphasizing that we developed a media behaviour, adjusting our relation to the physical and information environments. I examine some of the most notable experiments outside of the advertising sphere, offering a base for future development of augmented spaces and opening the discussion over the language of new media architecture.

  14. Silicone-induced Granuloma After Buttock Augmentation

    Science.gov (United States)

    Singh, Mansher; Solomon, Isaac H.; Calderwood, Michael S.

    2016-01-01

    Summary: Liquid silicone is inexpensive, minimally antigenic, and likely noncarcinogenic. Its simplicity of use has made it popular as a soft-tissue filler in some parts of the world for patients seeking rapid soft-tissue augmentation of the face, breast, and buttocks. However, multiple reports describe the complications of silicone injections such as cellulitis, abscess, ulceration, and foreign body migration. We present an unusual complication of granulomatous reaction secondary to silicone injection for buttock augmentation, with a literature review of this entity and treatment options. Our patient was a 54-year-old woman who underwent bilateral buttock augmentation in the Dominican Republic using percutaneous injection of liquid silicone. She presented to our facility 1 year after this procedure with pain and inflammation of both buttocks. She was diagnosed with multiple silicone granulomas. Her symptoms completely resolved with a 3-week course of minocycline. Granulomatous reactions to silicone may occur months to years after the silicone injection. The incidence of such complications may be increased when nonmedical-grade silicone is used, and hence, when these procedures are performed in developing countries. Tetracycline antibiotics, especially minocycline, may be used to achieve sustained remission. PMID:27014553

  15. IMPLEMENTATION OF AERONAUTICAL LOCAL SATELLITE AUGMENTATION SYSTEM

    Directory of Open Access Journals (Sweden)

    Stojce Ilcev

    2011-03-01

    Full Text Available Abstract. This paper introduces development and implementation of new Local Satellite AugmentationSystem as an integration component of the Regional Satellite Augmentation System (RSAS employingcurrent and new Satellite Communications, Navigation and Surveillance (CNS for improvement of the AirTraffic Control (ATC and Air Traffic Management (ATM and for enhancement safety systems includingtransport security and control of flights in all stages, airport approaching, landing, departures and allmovements over airport surface areas. The current first generation of the Global Navigation Satellite SystemGNSS-1 applications are represented by fundamental military solutions for Position, Velocity and Time ofthe satellite navigation and determination systems such as the US GPS and Russian GLONASS (Former-USSR requirements, respectively. The establishment of Aeronautical CNS is also discussed as a part ofGlobal Satellite Augmentation Systems of GPS and GLONASS systems integrated with existing and futureRSAS and LSAS in airports areas. Specific influence and factors related to the Comparison of the Currentand New Aeronautical CNS System including the Integration of RSAS and GNSS solutions are discussedand packet of facts is determined to maximize the new satellite Automatic Dependent Surveillance System(ADSS and Special Effects of the RSAS Networks. The possible future integration of RSAS and GNSS andthe common proposal of the satellite Surface Movement Guidance and Control are presented in thechangeless ways as of importance for future enfacements of ATC and ATM for any hypothetical airportinfrastructure.Keywords: ADSS, ATC, ATM, CNS, GSAS, LRAS, RSAS, SMGC, Special Effects of RSAS.

  16. Service connectivity architecture for mobile augmented reality

    Science.gov (United States)

    Turunen, Tuukka; Pyssysalo, Tino; Roening, Juha

    2001-06-01

    Mobile augmented reality can be utilized in a number of different services, and it provides a lot of added value compared to the interfaces used in mobile multimedia today. Intelligent service connectivity architecture is needed for the emerging commercial mobile augmented reality services, to guarantee mobility and interoperability on a global scale. Some of the key responsibilities of this architecture are to find suitable service providers, to manage the connection with and utilization of such providers, and to allow smooth switching between them whenever the user moves out of the service area of the service provider she is currently connected to. We have studied the potential support technologies for such architectures and propose a way to create an intelligent service connectivity architecture based on current and upcoming wireless networks, an Internet backbone, and mechanisms to manage service connectivity in the upper layers of the protocol stack. In this paper, we explain the key issues of service connectivity, describe the properties of our architecture, and analyze the functionality of an example system. Based on these, we consider our proposition a good solution to the quest for global interoperability in mobile augmented reality services.

  17. Adult Partner-Augmented Communication Input to Youth with Mental Retardation Using the System for Augmenting Language (SAL).

    Science.gov (United States)

    Sevcik, Rose A.; And Others

    1995-01-01

    This study examined the frequency and nature of augmented input that adult partners provided to 13 youth with moderate to severe mental retardation as they began to use the System for Augmenting Language. Analyses revealed differences in the frequency and in the manner and style with which home and school partners provided augmented input.…

  18. Uncovering Mass Segregation with Galaxy Analogues in Dark Matter Simulations

    CERN Document Server

    Joshi, Gandhali D; Wadsley, James

    2016-01-01

    We investigate mass segregation in group and cluster environments by identifying galaxy analogues in high-resolution dark matter simulations. Subhalos identified by the AHF and ROCKSTAR halo finders have similar mass functions, independent of resolution, but different radial distributions due to significantly different subhalo hierarchies. We propose a simple way to classify subhalos as galaxy analogues. The radial distributions of galaxy analogues agree well at large halo-centric radii for both AHF and ROCKSTAR but disagree near parent halo centres where the phase-space information used by ROCKSTAR is essential. We see clear mass segregation at small radii (within $0.5\\,r_{vir}$) with average galaxy analogue mass decreasing with radius. Beyond the virial radius, we find a mild trend where the average galaxy analogue mass increases with radius. These mass segregation trends are strongest in small groups and dominated by the segregation of low mass analogues. The lack of mass segregation in massive galaxy anal...

  19. Insulin analogues in pregnancy and specific congenital anomalies

    DEFF Research Database (Denmark)

    de Jong, Josta; Garne, Ester; Wender-Ozegowska, Ewa;

    2016-01-01

    Insulin analogues are commonly used in pregnant women with diabetes. It is not known if the use of insulin analogues in pregnancy is associated with any higher risk of congenital anomalies in the offspring compared with use of human insulin. We performed a literature search for studies of pregnant...... women with pregestational diabetes using insulin analogues in the first trimester and information on congenital anomalies. The studies were analysed to compare the congenital anomaly rate among foetuses of mothers using insulin analogues with foetuses of mothers using human insulin. Of 29 studies, we...... included 1286 foetuses of mothers using short-acting insulin analogues with 1089 references of mothers using human insulin and 768 foetuses of mothers using long-acting insulin analogues with 685 references of mothers using long-acting human insulin (Neutral Protamine Hagedorn). The congenital anomaly rate...

  20. The Greenland analogue project. Yearly report 2010

    Energy Technology Data Exchange (ETDEWEB)

    Harper, J.; Brinkerhoff, D.; Johnson, J. [University of Montana, Missoula (United States); Ruskeeniemi, T.; Engstroem, J.; Kukkonen, I. [Geological Survey of Finland (Finland)] [and others

    2012-04-15

    A four-year field and modelling study of the Greenland ice sheet and subsurface conditions, Greenland Analogue Project (GAP), has been initiated collaboratively by SKB, Posiva and NWMO to advance the understanding of processes associated with glaciation and their impact on the long-term performance of a deep geological repository. The study site encompasses a land terminus portion of the Greenland ice sheet, east of Kangerlussuaq, and is in many ways considered to be an appropriate analogue of the conditions that are expected to prevail in much of Canada and Fennoscandia during future glacial cycles. The project begins in 2009 and is scheduled for completion in 2012. Our current understanding of the hydrological, hydrogeological and hydrogeochemical processes associated with cold climate conditions and glacial cycles, and their impact on the long-term performance of deep geological repositories for spent nuclear fuel, will be significantly improved by studying a modern analogue. The GAP will conduct the first in situ investigations of some of the parameters and processes needed to achieve a better understanding of how an ice sheet may impact a deep repository, and will provide measurements, observations and data that may significantly improve our safety assessments and risk analyses of glaciation scenarios. This report was produced by the GAP team members and presents an overview of the activities within the GAP during the interval January 1 to December 31, 2010, as well as research results obtained during this time frame. Research for the GAP is ongoing, and additional results related to the data presented here may become available in the future and will be presented in subsequent annual reports. (orig.)

  1. The Greenland analogue project. Yearly report 2010

    International Nuclear Information System (INIS)

    A four-year field and modelling study of the Greenland ice sheet and subsurface conditions, Greenland Analogue Project (GAP), has been initiated collaboratively by SKB, Posiva and NWMO to advance the understanding of processes associated with glaciation and their impact on the long-term performance of a deep geological repository. The study site encompasses a land terminus portion of the Greenland ice sheet, east of Kangerlussuaq, and is in many ways considered to be an appropriate analogue of the conditions that are expected to prevail in much of Canada and Fennoscandia during future glacial cycles. The project begins in 2009 and is scheduled for completion in 2012. Our current understanding of the hydrological, hydrogeological and hydrogeochemical processes associated with cold climate conditions and glacial cycles, and their impact on the long-term performance of deep geological repositories for spent nuclear fuel, will be significantly improved by studying a modern analogue. The GAP will conduct the first in situ investigations of some of the parameters and processes needed to achieve a better understanding of how an ice sheet may impact a deep repository, and will provide measurements, observations and data that may significantly improve our safety assessments and risk analyses of glaciation scenarios. This report was produced by the GAP team members and presents an overview of the activities within the GAP during the interval January 1 to December 31, 2010, as well as research results obtained during this time frame. Research for the GAP is ongoing, and additional results related to the data presented here may become available in the future and will be presented in subsequent annual reports. (orig.)

  2. Approximate Augmented Lagrangian Functions and Nonlinear Semidefinite Programs

    Institute of Scientific and Technical Information of China (English)

    X. X. HUANG; K. L. TEO; X. Q. YANG

    2006-01-01

    In this paper, an approximate augmented Lagrangian function for nonlinear semidefinite programs is introduced. Some basic properties of the approximate augmented Lagrange function such as monotonicity and convexity are discussed. Necessary and sufficient conditions for approximate strong duality results are derived. Conditions for an approximate exact penalty representation in the framework of augmented Lagrangian are given. Under certain conditions, it is shown that any limit point of a sequence of stationary points of approximate augmented Lagrangian problems is a KKT point of the original semidefinite program and that a sequence of optimal solutions to augmented Lagrangian problems converges to a solution of the original semidefinite program.

  3. Digital and analogue industrial radiography, application fields

    International Nuclear Information System (INIS)

    Full text: Reusable phosphor screens for computer radiography (CR), amorphous selenium screens for direct radiography (DR), film digitalisation (FD) constitute imaging methods accepted by industry and are used for non-destructive radiographic testing (RT). Economic pressures are involving and affecting digital RT technology. Standards and codes for film radiography and radioscopy qualification do no longer cover the wide range of digital RT applications. It will be our task to optimise the performance of digital RT characterisation and to create appropriate examination methods to use all these new and existent technologies. In the meantime, an increasing automation and control of manual methods of analogue radiography can as well be expected. (author)

  4. Technical Considerations in Magnetic Analogue Models

    CERN Document Server

    Adams, Patrick W M

    2016-01-01

    The analogy between vorticity and magnetic fields has been a subject of interest to researchers for a considerable period of time, mainly because of the structural similarities between the systems of equations that govern the evolution of the two fields. We recently presented the analysis of magnetic fields and hydrodynamics vorticity fields and argued for a formal theory of analogue magnetism. This article provides in depth technical details of the relevant considerations for the simulation procedures and extends the analyses to a range of fluids.

  5. Analogues of Euler and Poisson Summation Formulae

    Indian Academy of Sciences (India)

    Vivek V Rane

    2003-08-01

    Euler–Maclaurin and Poisson analogues of the summations $\\sum_{a < n ≤ b}(n)f(n), \\sum_{a < n ≤ b}d(n) f(n), \\sum_{a < n ≤ b}d(n)(n) f(n)$ have been obtained in a unified manner, where (()) is a periodic complex sequence; () is the divisor function and () is a sufficiently smooth function on [, ]. We also state a generalised Abel's summation formula, generalised Euler's summation formula and Euler's summation formula in several variables.

  6. Natural Analogues of CO2 Geological Storage

    International Nuclear Information System (INIS)

    Geological storage of carbon dioxide is nowadays, internationally considered as the most effective method for greenhouse gas emission mitigation, in order to minimize the global climate change universally accepted. Nevertheless, the possible risks derived of this long-term storage have a direct influence on its public acceptance. Among the favourable geological formations to store CO2, depleted oil and gas fields, deep saline reservoirs, and unamiable coal seams are highlighted. One of the most important objectives of the R and D projects related to the CO2 geological storage is the evaluation of the CO2 leakage rate through the above mentioned geological formations. Therefore, it is absolutely necessary to increase our knowledge on the interaction among CO2, storage and sealing formations, as well as on the flow paths and the physical resistance of the sealing formation. The quantification of the CO2 leakage rate is essential to evaluate the effects on the human and animal health, as well as for the ecosystem and water quality. To achieve these objectives, the study of the natural analogues is very useful in order to know the natural leakage rate to the atmosphere, its flow paths, the physical, chemical and mineralogical modifications due to the long term interaction processes among the CO2 and the storage and sealing formations, as well as the effects on the groundwaters and ecosystems. In this report, we have tried to summarise the main characteristics of the natural reservoirs and surficial sources of CO2, which are both natural analogues of the geological storage and CO2 leakage, studied in EEUU, Europe and Australia. The main objective of this summary is to find the possible applications for long-term risk prediction and for the performance assessment by means of conceptual and numerical modelling, which will allow to validate the predictive models of the CO2 storage behaviour, to design and develop suitable monitoring techniques to control the CO2 behaviour

  7. Materials analogue of zero-stiffness structures

    Science.gov (United States)

    Kumar, Arun; Subramaniam, Anandh

    2011-04-01

    Anglepoise lamps and certain tensegrities are examples of zero-stiffness structures. These structures are in a state of neutral equilibrium with respect to changes in configuration of the system. Using Eshelby's example of an edge dislocation in a thin plate that can bend, we report the discovery of a non-trivial new class of material structures as an analogue to zero-stiffness structures. For extended positions of the edge dislocation in these structures, the dislocation experiences a zero image force. Salient features of these material structures along with the key differences from conventional zero-stiffness structures are pointed out.

  8. Satellite television analogue and digital reception techniques

    CERN Document Server

    Benoit, Herve

    1999-01-01

    Satellite television is part of the lives of millions of television viewers worldwide and its influence is set to increase significantly with the launch of digital satellite television services.This comprehensive reference book, written by the author of the highly successful 'Digital Television', provides a technical overview of both analogue and digital satellite TV. Written concisely and thoroughly, it covers all aspects of satellite TV necessary to understand its operation and installation. It also covers the evolution of satellite television, and contains a detailed glossary of tec

  9. Analogue cosmology in a hadronic fluid

    Directory of Open Access Journals (Sweden)

    Bilić Neven

    2014-01-01

    Full Text Available Analog gravity models of general relativity seem promising routes to providing laboratory tests of the foundation of quantum field theory in curved space-time. In contrast to general relativity, where geometry of a spacetime is determined by the Einstein equations, in analog models geometry and evolution of analog spacetime are determined by the equations of fluid mechanics. In this paper we study the analogue gravity model based on massless pions propagating in a expanding hadronic fluid. The analog expanding spacetime takes the form of an FRW universe, with the apparent and trapping horizons defined in the standard way.

  10. U.S. Nuclear Regulatory Commission natural analogue research program

    Energy Technology Data Exchange (ETDEWEB)

    Kovach, L.A.; Ott, W.R. [Nuclear Regulatory Commission, Washington, DC (United States)

    1995-09-01

    This article describes the natural analogue research program of the U.S. Nuclear Regulatory Commission (US NRC). It contains information on the regulatory context and organizational structure of the high-level radioactive waste research program plan. It also includes information on the conditions and processes constraining selection of natural analogues, describes initiatives of the US NRC, and describes the role of analogues in the licensing process.

  11. Scintigraphy with labelled analogues of the somatostatin; Scintigraphie aux analogues marques de la somatostatine (octreoscan)

    Energy Technology Data Exchange (ETDEWEB)

    Duet, M.; Ajzenberg, C.; Warnet, A.; Mundler, O. [Hopital Lariboisiere, 75 - Paris (France)

    1998-02-01

    The receptors of the somatostatin have been localized in a big number of tumors, whom a great number are neuro-endocrine tumors. However, some tumors that have not this differentiation (breast cancer, lymphomas, cerebral tumors) possess them as well. Analogues of somatostatin, labelled with isotopes having a gamma emission, allow from now their detection in vivo. (N.C.)

  12. Long-term predictions using natural analogues

    Energy Technology Data Exchange (ETDEWEB)

    Ewing, R.C. [Univ. of New Mexico, Albuquerque, NM (United States)

    1995-09-01

    One of the unique and scientifically most challenging aspects of nuclear waste isolation is the extrapolation of short-term laboratory data (hours to years) to the long time periods (10{sup 3}-10{sup 5} years) required by regulatory agencies for performance assessment. The direct validation of these extrapolations is not possible, but methods must be developed to demonstrate compliance with government regulations and to satisfy the lay public that there is a demonstrable and reasonable basis for accepting the long-term extrapolations. Natural systems (e.g., {open_quotes}natural analogues{close_quotes}) provide perhaps the only means of partial {open_quotes}validation,{close_quotes} as well as data that may be used directly in the models that are used in the extrapolation. Natural systems provide data on very large spatial (nm to km) and temporal (10{sup 3}-10{sup 8} years) scales and in highly complex terranes in which unknown synergisms may affect radionuclide migration. This paper reviews the application (and most importantly, the limitations) of data from natural analogue systems to the {open_quotes}validation{close_quotes} of performance assessments.

  13. Alligator Rivers Analogue project - Geologic Setting

    International Nuclear Information System (INIS)

    In this volume the author synthesizes the results of the investigations carried over more than 20 years in the Koongarra area. It describes its regional geologic setting, geological evolution and the exploration activities carried out to date. The secondary ore of the Koongarra No. 1 uranium orebody provides a natural analogue suitable for validation of models for radionuclide transport. Although the primary uranium mineralisation occurs as uraninite veins and veinlets in fractures and brecciated zones that cross cut the steeply dipping (55 deg.C) host schists, weathering and dispersion of uranium within the zone of weathered schists has formed this secondary ore. The interaction of the weathering processes with the mineralogy and geochemistry of the unweathered host schists, and the primary hydrothermal alteration halo with and around the primary uranium mineralisation, has also been critical in the development of the secondary ore. This secondary ore natural analogue being at a shallow depth, plus the availability of open boreholes and drill core/borehole samples, has facilitated groundwater and rock investigations. 49 refs., 4 tabs., 42 figs

  14. Self-Powered Analogue Smart Skin.

    Science.gov (United States)

    Shi, Mayue; Zhang, Jinxin; Chen, Haotian; Han, Mengdi; Shankaregowda, Smitha A; Su, Zongming; Meng, Bo; Cheng, Xiaoliang; Zhang, Haixia

    2016-04-26

    The progress of smart skin technology presents unprecedented opportunities for artificial intelligence. Resolution enhancement and energy conservation are critical to improve the perception and standby time of robots. Here, we present a self-powered analogue smart skin for detecting contact location and velocity of the object, based on a single-electrode contact electrification effect and planar electrostatic induction. Using an analogue localizing method, the resolution of this two-dimensional smart skin can be achieved at 1.9 mm with only four terminals, which notably decreases the terminal number of smart skins. The sensitivity of this smart skin is remarkable, which can even perceive the perturbation of a honey bee. Meanwhile, benefiting from the triboelectric mechanism, extra power supply is unnecessary for this smart skin. Therefore, it solves the problems of batteries and connecting wires for smart skins. With microstructured poly(dimethylsiloxane) films and silver nanowire electrodes, it can be covered on the skin with transparency, flexibility, and high sensitivity. PMID:27010713

  15. Repeated vertebral augmentation for new vertebral compression fractures of postvertebral augmentation patients: a nationwide cohort study

    OpenAIRE

    Liang CL; Wang HK; Syu FK; Wang KW; Lu K; Liliang PC

    2015-01-01

    Cheng-Loong Liang,1 Hao-Kwan Wang,1 Fei-Kai Syu,2 Kuo-Wei Wang,1 Kang Lu,1 Po-Chou Liliang1 1Department of Neurosurgery, E-Da Hospital, I-Shou University, Kaohsiung City, Taiwan; 2Department of Pharmacy, China Medical University Hospital, Taichung City, Taiwan Purpose: Postvertebral augmentation vertebral compression fractures are common; repeated vertebral augmentation is usually performed for prompt pain relief. This study aimed to evaluate the incidence and risk factors of repeat vertebr...

  16. Repeated vertebral augmentation for new vertebral compression fractures of postvertebral augmentation patients: a nationwide cohort study

    Directory of Open Access Journals (Sweden)

    Liang CL

    2015-03-01

    Full Text Available Cheng-Loong Liang,1 Hao-Kwan Wang,1 Fei-Kai Syu,2 Kuo-Wei Wang,1 Kang Lu,1 Po-Chou Liliang1 1Department of Neurosurgery, E-Da Hospital, I-Shou University, Kaohsiung City, Taiwan; 2Department of Pharmacy, China Medical University Hospital, Taichung City, Taiwan Purpose: Postvertebral augmentation vertebral compression fractures are common; repeated vertebral augmentation is usually performed for prompt pain relief. This study aimed to evaluate the incidence and risk factors of repeat vertebral augmentation.Methods: We performed a retrospective, nationwide, population-based longitudinal observation study, using the National Health Insurance Research Database (NHIRD of Taiwan. All patients who received vertebral augmentation for vertebral compression fractures were evaluated. The collected data included patient characteristics (demographics, comorbidities, and medication exposure and repeat vertebral augmentation. Kaplan–Meier and stratified Cox proportional hazard regressions were performed for analyses.Results: The overall incidence of repeat vertebral augmentation was 11.3% during the follow-up until 2010. Patients with the following characteristics were at greater risk for repeat vertebral augmentation: female sex (AOR=1.24; 95% confidence interval [CI]: 1.10–2.36, advanced age (AOR=1.60; 95% CI: 1.32–2.08, diabetes mellitus (AOR=4.31; 95% CI: 4.05–5.88, cerebrovascular disease (AOR=4.09; 95% CI: 3.44–5.76, dementia (AOR=1.97; 95% CI: 1.69–2.33, blindness or low vision (AOR=3.72; 95% CI: 2.32–3.95, hypertension (AOR=2.58; 95% CI: 2.35–3.47, and hyperlipidemia (AOR=2.09; 95% CI: 1.67–2.22. Patients taking calcium/ vitamin D (AOR=2.98; 95% CI: 1.83–3.93, bisphosphonates (AOR=2.11; 95% CI: 1.26–2.61, or calcitonin (AOR=4.59; 95% CI: 3.40–5.77 were less likely to undergo repeat vertebral augmentation; however, those taking steroids (AOR=7.28; 95% CI: 6.32–8.08, acetaminophen (AOR=3.54; 95% CI: 2.75–4.83, or nonsteroidal

  17. Repeated vertebral augmentation for new vertebral compression fractures of postvertebral augmentation patients: a nationwide cohort study

    Directory of Open Access Journals (Sweden)

    Liang CL

    2015-03-01

    Full Text Available Cheng-Loong Liang,1 Hao-Kwan Wang,1 Fei-Kai Syu,2 Kuo-Wei Wang,1 Kang Lu,1 Po-Chou Liliang1 1Department of Neurosurgery, E-Da Hospital, I-Shou University, Kaohsiung City, Taiwan; 2Department of Pharmacy, China Medical University Hospital, Taichung City, Taiwan Purpose: Postvertebral augmentation vertebral compression fractures are common; repeated vertebral augmentation is usually performed for prompt pain relief. This study aimed to evaluate the incidence and risk factors of repeat vertebral augmentation.Methods: We performed a retrospective, nationwide, population-based longitudinal observation study, using the National Health Insurance Research Database (NHIRD of Taiwan. All patients who received vertebral augmentation for vertebral compression fractures were evaluated. The collected data included patient characteristics (demographics, comorbidities, and medication exposure and repeat vertebral augmentation. Kaplan–Meier and stratified Cox proportional hazard regressions were performed for analyses.Results: The overall incidence of repeat vertebral augmentation was 11.3% during the follow-up until 2010. Patients with the following characteristics were at greater risk for repeat vertebral augmentation: female sex (AOR=1.24; 95% confidence interval [CI]: 1.10–2.36, advanced age (AOR=1.60; 95% CI: 1.32–2.08, diabetes mellitus (AOR=4.31; 95% CI: 4.05–5.88, cerebrovascular disease (AOR=4.09; 95% CI: 3.44–5.76, dementia (AOR=1.97; 95% CI: 1.69–2.33, blindness or low vision (AOR=3.72; 95% CI: 2.32–3.95, hypertension (AOR=2.58; 95% CI: 2.35–3.47, and hyperlipidemia (AOR=2.09; 95% CI: 1.67–2.22. Patients taking calcium/ vitamin D (AOR=2.98; 95% CI: 1.83–3.93, bisphosphonates (AOR=2.11; 95% CI: 1.26–2.61, or calcitonin (AOR=4.59; 95% CI: 3.40–5.77 were less likely to undergo repeat vertebral augmentation; however, those taking steroids (AOR=7.28; 95% CI: 6.32–8.08, acetaminophen (AOR=3.54; 95% CI: 2.75–4.83, or nonsteroidal

  18. Augmented virtuality for arthroscopic knee surgery.

    Science.gov (United States)

    Li, John M; Bardana, Davide D; Stewart, A James

    2011-01-01

    This paper describes a computer system to visualize the location and alignment of an arthroscope using augmented virtuality. A 3D computer model of the patient's joint (from CT) is shown, along with a model of the tracked arthroscopic probe and the projection of the camera image onto the virtual joint. A user study, using plastic bones instead of live patients, was made to determine the effectiveness of this navigated display; the study showed that the navigated display improves target localization in novice residents. PMID:22003616

  19. Stem Cells for Augmenting Tendon Repair

    Directory of Open Access Journals (Sweden)

    Lawrence V. Gulotta

    2012-01-01

    Full Text Available Tendon healing is fraught with complications such as reruptures and adhesion formation due to the formation of scar tissue at the injury site as opposed to the regeneration of native tissue. Stem cells are an attractive option in developing cell-based therapies to improve tendon healing. However, several questions remain to be answered before stem cells can be used clinically. Specifically, the type of stem cell, the amount of cells, and the proper combination of growth factors or mechanical stimuli to induce differentiation all remain to be seen. This paper outlines the current literature on the use of stem cells for tendon augmentation.

  20. Lean stability augmentation for premixing, prevaporizing combustors

    Science.gov (United States)

    Mcvey, J. B.; Kennedy, J. B.

    1979-01-01

    An experimental program was conducted to investigate techniques for improving the lean combustion limits of premixing, prevaporizing combustors applicable to gas turbine engine main burners. Augmented flameholders employing recessed perforated plates, catalyzed tube bundles, and configurations in which pilot fuel was injected into the wakes of V-gutters or perforated plates were designed and tested. Stable operation of the piloted designs was achieved at equivalence ratios as low as 0.25; NOx emissions of less than 1.0 g/kg at simulated turbine engine cruise conditions were obtained. A piloted perforated plate employing four percent pilot fuel flow produced the best performance while meeting severe NOx constraints.

  1. Pulmonary Embolism with Vertebral Augmentation Procedures

    Directory of Open Access Journals (Sweden)

    Swetha Bopparaju

    2013-01-01

    Full Text Available With the prevalence of an aging American population on the rise, osteoporotic vertebral fractures are becoming a common occurrence, resulting in an increase in vertebral augmentation procedures and associated complications such as cement leakage, vertebral compressions, and pulmonary embolism. We describe a patient who presented with respiratory distress three years following kyphoplasty of the lumbar vertebra. Computed tomography (CT angiogram of the chest confirmed the presence of polymethylmethacrylate (PMMA cement in the lung fields and pulmonary vessels. We conducted a systematic review of the published literature identifying effective management strategies for the treatment of vertebroplasty-associated pulmonary embolism.

  2. Freegaming: Mobile, Collaborative, Adaptive and Augmented Exergaming

    Directory of Open Access Journals (Sweden)

    Levent Görgü

    2012-01-01

    Full Text Available Addressing the obesity epidemic that plagues many societies remains an outstanding public health issue. One innovative approach to addressing this problem is Exergaming. A combination of Exercise and Gaming, the objective is to motivate people participate in exercise regimes, usually in their home environment. In this article a more holistic interpretation of this exercise paradigm is proposed. Freegaming augments Exergaming in a number of key dimensions but especially through the promotion of games in outdoor mobile contexts and within a social environment. The design and implementation of a platform for Freegaming is described and illustrated through the description of a sample game.

  3. Terrain Simplification Research in Augmented Scene Modeling

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    environment. As one of the most important tasks in augmented scene modeling, terrain simplification research has gained more and more attention. In this paper, we mainly focus on point selection problem in terrain simplification using triangulated irregular network. Based on the analysis and comparison of traditional importance measures for each input point, we put forward a new importance measure based on local entropy. The results demonstrate that the local entropy criterion has a better performance than any traditional methods. In addition, it can effectively conquer the "short-sight" problem associated with the traditional methods.

  4. Augmented Reality Sultan Deli Di Istana Maimun

    OpenAIRE

    Nathan P. L

    2016-01-01

    Augmented reality is a technology that can provide visualization of 3D models. Based from that technology, the modeling from a picture of Sultan Deli Istana Maimun can be applied to restore photos Sultan Deli into a three-dimensional model. This is due to Sultan Deli which is one of the important figures in the history of Medan city known less by the public. Submission of Deli Sultanate history only through such two-dimensional images and other archives. The photo shows the Sultan of Deli ev...

  5. Black Hole Analogue in Bose–Einstein Condensation

    Indian Academy of Sciences (India)

    Tangmei He

    2014-09-01

    We have proposed a black hole analogue in a Bose–Einstein condensation. By introducing the Painlevé co-ordinates and using K–G equations, we have obtained the critical temperature of the black hole analogue in a Bose–Einstein condensation.

  6. A q-Analogue of Rucinski-Voigt Numbers

    OpenAIRE

    Roberto B. Corcino; Charles B. Montero

    2012-01-01

    A q-analogue of Rucinski-Voigt numbers is defined by means of a recurrence relation, and some properties including the orthogonality and inverse relations with the q-analogue of the limit of the differences of the generalized factorial are obtained.

  7. Insulin analogues and severe hypoglycaemia in type 1 diabetes

    DEFF Research Database (Denmark)

    Kristensen, P L; Hansen, L S; Jespersen, M J;

    2012-01-01

    The effect of insulin analogues on glycaemic control is well-documented, whereas the effect on avoidance of severe hypoglycaemia remains tentative. We studied the frequency of severe hypoglycaemia in unselected patients with type 1 diabetes treated with insulin analogues, human insulin, or mixed...

  8. Basic entwinements: unassuming analogue inserts in basic digital modeling (courses)

    DEFF Research Database (Denmark)

    Wiesner, Thomas

    2012-01-01

    morphologies in a seemingly scaleless manipulative universe, simple, rapid-paced analogue sketching tool can be introduced to supplement a purely digital approach. Inserted casually, yet with almost acupunctural precision during digital coursework, the simple analogue sketching tools present a wide variety...

  9. Somatostatin analogue in short term management of hyperinsulinism.

    OpenAIRE

    Kirk, J M; Di Silvio, L; Hindmarsh, P. C.; Brook, C G

    1988-01-01

    Five infants with hypoglycaemia due to hyperinsulinism were treated for between three and 11 days with a somatostatin analogue, which raised the mean blood glucose concentration and lowered the glucose requirements in all. Somatostatin analogue appears to be useful in the short term management of these patients.

  10. Augmenting Your Own Reality: Student Authoring of Science-Based Augmented Reality Games

    Science.gov (United States)

    Klopfer, Eric; Sheldon, Josh

    2010-01-01

    Augmented Reality (AR) simulations superimpose a virtual overlay of data and interactions onto a real-world context. The simulation engine at the heart of this technology is built to afford elements of game play that support explorations and learning in students' natural context--their own community and surroundings. In one of the more recent…

  11. Development of new mitomycin C and porfiromycin analogues.

    Science.gov (United States)

    Iyengar, B S; Lin, H J; Cheng, L; Remers, W A; Bradner, W T

    1981-08-01

    New mitomycin C and porfiromycin analogues were prepared by treating mitomycin A and N-methylmitomycin A with a variety of amines, including aziridines, allylamines, propargylamines, chloroalkylamines, hydroxyalkylamines, glycine derivatives, aralkylamines, and heterocyclic amines. All analogues were evaluated against P-388 murine leukemia and selected ones were examined for their leukopenic properties. Certain analogues were found to be superior to mitomycin C in potency, efficacy, and therapeutic ratio in the P-388 assay. The most active substituents at the mitosane 7 position included aziridine, 2-methylaziridine, propargylamine, furfurylamine, methyl glycinate, and 3-aminopyridine. Mitomycin A and the 7-aziridino, 7-(2-methylaziridino), and 3-aminopyridine analogues were less leukopenic than mitomycin C. Certain other analogues, including propargylamino and methyl glycinate, were highly leukopenic. The three compounds tested against B-16 melanoma in mice were significantly more effective than mitomycin C in this assay. Previously established structure--activity relationships were found inadequate to account for all of the new data. PMID:7328599

  12. Automated Layout Generation of Analogue and Mixed-Signal ASIC's

    DEFF Research Database (Denmark)

    Bloch, Rene

    The research and development carried out in this Ph.D. study focusses on two key areas of the design flow for analogue and mixed-signal integrated circuit design, the mixed-signal floorplanning and the analogue layout generation.A novel approach to floorplanning is presented which provides true...... flow.A new design flow for automated layout generation of general analogue integrated circuits is presented. The design flow provides an automated design path from a sized circuit schematic to the final layout containing the placed, but unrouted, devices of the circuit. The analogue circuit layout...... is generated using a full-custom layout style and is based on a library of CMOS process independent device generators. The placement for the analogue circuit is derived using the interactive floorplan optimization algorithm described above. This ensures that a high degree of user control is implemented...

  13. The development of somatostatin analogues mediated tumor targeting and therapy

    International Nuclear Information System (INIS)

    Radionuclide labelled somatostatin analogues have been widely used in the detection of neuro-endocrine tumors. Till now, most of somatostatin analogues only have high affinity to somatostatin receptor 2 (SSTR2), further clinical applications was limitted. A new generation of somatostatin analogues such as 1, 4, 7, 10-tetraazacyclodocecane-N, N', N'', N''' -tetaraacetic acid-Na 13- octertide (DOTA-NOC) etc, binding to somatostatin receptors not only SSTR2 but other subtypes has been used mainly in preclinical study. In this review, we discussed these new somatostatin analogues, chelating agent, and their new labelled compounds, these new radionuclide labelled somatostatin analogues may hold great promise for the receptor-mediated tumor imaging and treatments. (authors)

  14. SYNTHESIS AND BIOEVALUATION OF KETOCONAZOLE THIOSEMICARBAZONE ANALOGUES

    Directory of Open Access Journals (Sweden)

    Y. Murti

    2011-12-01

    Full Text Available Ketoconazole (KTZ is a synthetic antifungal drug used to prevent and treat fungal infections, especially in immunocompromised patients such as those with AIDS. Resistance to ketoconazole has been observed in a number of clinical fungal isolates, including C. albicans. Thus new effective agents with less toxicity against fungal infection are urgently required. With this view, ketoconazole thiosemicarbazone analogues (Compounds 1-10 were synthesized wherein condensation of different thiosemicarbazides substituted by different cyclic and aromatic amines with the KTZ was done. Investigation of in-vitro antifungal activity of compounds was done by broth microdilution assay method against five pathogenic fungi Aspergillus niger, Candida albicans, Candida krusei, Candida glabrata and Candida tropicalis. Ketoconazole was used as reference for inhibitory activity against fungi. All the compounds were found potent antifungal agents, while compounds 8, 9 and 10 exhibited excellent in-vitro antifungal activity showing importance of halogenated compounds.

  15. Helical chirality induction of expanded porphyrin analogues

    Indian Academy of Sciences (India)

    Jun-Ichiro Setsune

    2012-11-01

    Expanded porphyrin analogues with unique figure-eight conformation were prepared by way of useful pyrrole intermediates such as bis(azafulvene)s and 2-borylpyrrole. Supramolecular chirogenesis of cyclooctapyrrole O1 with 32-cycloconjugation was successfully applied to determine absolute configuration of chiral carboxylic acids. Dinuclear CuII complex of cyclooctapyrrole O2 with interrupted -conjugation was resolved by HPLC into enantiomers and their helical handedness was determined by theoretical simulation of their CD spectral pattern. Enantioselective induction of helicity in the metal helicate formation in the presence of a chiral promoter was demonstrated by using ()-(+)-1-(1-phenyl)ethylamine that favoured , helicity. Dinuclear CoII complexes of cyclotetrapyrroletetrapyridine O3 were found to be substitution labile and pick up amino acid anions in water. Those amino acid complexes of O3Co2 were rendered to adopt a particular unidirectional helical conformation preferentially depending on the ligated amino acid anion.

  16. Gravitational analogue of the Witten effect

    Energy Technology Data Exchange (ETDEWEB)

    Foda, O. (International Centre for Theoretical Physics, Trieste (Italy))

    1985-07-22

    In the presence of massive fermions, and assuming a non-vanishing theta-parameter as the only source of CP violation, the Witten effect (a shift in the electric charge of a magnetic monopole due to CP non-conservation) is shown to follow from an anomalous chiral commutator. Next, given the gravitational contribution to the chiral anomaly, the corresponding anomalous commutator for Dirac fermion currents in a gravitational background is derived. From that, we infer the equivalence of a thetaR tildeR term in the lagrangian to a shift in the mass parameter of the NUT metric, in proportion to theta. This is interpreted as the gravitational analogue of the Witten effect. Its relevance to certain Kaluza-Klein monopoles is briefly discussed.

  17. Jupiter analogues and planets of active stars

    Directory of Open Access Journals (Sweden)

    Henning T.

    2013-04-01

    Full Text Available Combined results are now available from a 15 year long search for Jupiter analogues around solar-type stars using the ESO CAT + CES, ESO 3.6 m + CES, and ESO 3.6 m + HARPS instruments. They comprise planet (co-discoveries (ι Hor and HR 506 and confirmations (three planets in HR 3259 as well as non-confirmations of planets (HR 4523 and ɛ Eri announced elsewhere. A long-term trend in ɛ Ind found by our survey is probably attributable to a Jovian planet with a period >30 yr, but we cannot fully exclude stellar activity effects as the cause. A 3.8 year periodic variation in HR 8323 can be attributed to stellar activity.

  18. Electromagnetic wave analogue of an electronic diode

    International Nuclear Information System (INIS)

    An electronic diode is a nonlinear semiconductor circuit component that allows conduction of electrical current in one direction only. A component with similar functionality for electromagnetic waves, an electromagnetic isolator, is based on the Faraday effect of rotation of the polarization state and is also a key component in optical and microwave systems. Here we demonstrate a chiral electromagnetic diode, which is a direct analogue of an electronic diode: its functionality is underpinned by an extraordinarily strong nonlinear wave propagation effect in the same way as the electronic diode function is provided by the nonlinear current characteristic of a semiconductor junction. The effect exploited in this new electromagnetic diode is an intensity-dependent polarization change in an artificial chiral metamolecule. This microwave effect exceeds a similar optical effect previously observed in natural crystals by more than 12 orders of magnitude and a direction-dependent transmission that differs by a factor of 65.

  19. Electromagnetic wave analogue of electronic diode

    CERN Document Server

    Shadrivov, Ilya V; Kivshar, Yuri S; Fedotov, Vassili A; Zheludev, Nikolay I

    2010-01-01

    An electronic diode is a nonlinear semiconductor circuit component that allows conduction of electrical current in one direction only. A component with similar functionality for electromagnetic waves, an electromagnetic isolator, is based on the Faraday effect of the polarization state rotation and is also a key component of optical and microwave systems. Here we demonstrate a chiral electromagnetic diode, which is a direct analogue of an electronic diode: its functionality is underpinned by an extraordinary strong nonlinear wave propagation effect in the same way as electronic diode function is provided by a nonlinear current characteristic of a semiconductor junction. The effect exploited in this new electromagnetic diode is an intensity-dependent polarization change in an artificial chiral metamolecule. This microwave effect exceeds a similar optical effect previously observed in natural crystals by more than 12 orders of magnitude and a direction-dependent transmission that differing by a factor of 65.

  20. Solution Processed PEDOT Analogues in Electrochemical Supercapacitors.

    Science.gov (United States)

    Österholm, Anna M; Ponder, James F; Kerszulis, Justin A; Reynolds, John R

    2016-06-01

    We have designed fully soluble ProDOTx-EDOTy copolymers that are electrochemically equivalent to electropolymerized PEDOT without using any surfactants or dispersants. We show that these copolymers can be incorporated as active layers in solution processed thin film supercapacitors to demonstrate capacitance, stability, and voltage similar to the values of those that use electrodeposited PEDOT as the active material with the added advantage of the possibility for large scale, high-throughput processing. These Type I supercapacitors provide exceptional cell voltages (up to 1.6 V), highly symmetrical charge/discharge behavior, promising long-term stability exceeding 50 000 charge/discharge cycles, as well as energy (4-18 Wh/kg) and power densities (0.8-3.3 kW/kg) that are comparable to those of electrochemically synthesized analogues. PMID:27195798

  1. The gravitational analogue of the Witten effect

    International Nuclear Information System (INIS)

    In the presence of massive fermions, and assuming a non-vanishing theta-parameter as the only source of CP violation, the Witten effect (a shift in the electric charge of a magnetic monopole due to CP non-conservation) is shown to follow from an anomalous chiral commutator. Next, given the gravitational contribution to the chiral anomaly, the corresponding anomalous commutator for Dirac fermion currents in a gravitational background is derived. From that, we infer the equivalence of a thetaR tildeR term in the lagrangian to a shift in the mass parameter of the NUT metric, in proportion to theta. This is interpreted as the gravitational analogue of the Witten effect. Its relevance to certain Kaluza-Klein monopoles is briefly discussed. (orig.)

  2. The gravitational analogue of the Witten effect

    International Nuclear Information System (INIS)

    In the presence of massive fermions, and assuming a non-vanishing theta-parameter as the only source of CP-violation, the Witten effect [a shift in the electric charge of a magnetic monopole due to CP-non-conservation] is shown to follow from an anomalous chiral commutator. Next, given the gravitational contribution to the chiral anomaly, the corresponding anomalous commutator for Dirac fermion currents in a gravitational background is derived. From that, we infer the equivalence of a theta R-tilde R term in the Lagrangian to a shift in the mass parameter of the NUT metric, in proportion to theta. This is interpreted as the gravitational analogue of the Witten effect. Its relevance to certain Kaluza-Klein monopoles is briefly discussed. (author)

  3. Natural analogues of nuclear waste glass corrosion.

    Energy Technology Data Exchange (ETDEWEB)

    Abrajano, T.A. Jr.; Ebert, W.L.; Luo, J.S.

    1999-01-06

    This report reviews and summarizes studies performed to characterize the products and processes involved in the corrosion of natural glasses. Studies are also reviewed and evaluated on how well the corrosion of natural glasses in natural environments serves as an analogue for the corrosion of high-level radioactive waste glasses in an engineered geologic disposal system. A wide range of natural and experimental corrosion studies has been performed on three major groups of natural glasses: tektite, obsidian, and basalt. Studies of the corrosion of natural glass attempt to characterize both the nature of alteration products and the reaction kinetics. Information available on natural glass was then compared to corresponding information on the corrosion of nuclear waste glasses, specifically to resolve two key questions: (1) whether one or more natural glasses behave similarly to nuclear waste glasses in laboratory tests, and (2) how these similarities can be used to support projections of the long-term corrosion of nuclear waste glasses. The corrosion behavior of basaltic glasses was most similar to that of nuclear waste glasses, but the corrosion of tektite and obsidian glasses involves certain processes that also occur during the corrosion of nuclear waste glasses. The reactions and processes that control basalt glass dissolution are similar to those that are important in nuclear waste glass dissolution. The key reaction of the overall corrosion mechanism is network hydrolysis, which eventually breaks down the glass network structure that remains after the initial ion-exchange and diffusion processes. This review also highlights some unresolved issues related to the application of an analogue approach to predicting long-term behavior of nuclear waste glass corrosion, such as discrepancies between experimental and field-based estimates of kinetic parameters for basaltic glasses.

  4. MAQARIN natural analogue study: phase III

    International Nuclear Information System (INIS)

    This report represents the conclusion to Phase III of the Maqarin Natural Analogue Study. The main thrust was to establish the origin and chemistry of the Western Springs hyper alkaline groundwaters (Na/K enriched Ca(OH)2 type) and to study their interaction with rocks of different compositions, as natural analogues to key processes that might occur at an early stage within the 'alkali disturbed zone' of cementitious repositories in different host rocks. Whilst earlier studies at Maqarin were very much site-specific and process-oriented, Phase III provided a regional perspective to the geological evolution of the Maqarin region. This was made possible by greater field access which allowed a more systematic structural and geomorphological study of the area. This has resulted in a greater understanding of the age and spatial relationships concerning formation of the cement zones through spontaneous combustion of the Bituminous Marls, and the subsequent formation of high pH groundwaters at the Eastern and Western Springs locations. At the Western Springs locality, hydrochemical and hydrogeological evaluation of new and published data (plus access to unpublished data), together with detailed mineralogical and geochemical studies, helped to clarify the very earliest stage of cement leachate/host rock interaction. The data were used also to test coupled flow/transport codes developed to assess the long-term evolution of a cementitious repository. Additional objectives addressed include: a) rock matrix diffusion, b) the occurrence and chemical controls on zeolite composition, e) the occurrence and chemical controls on clay stability, and d) the role of microbes, organics and colloids in trace element transport. The Maqarin site now provides a consistent picture explaining the origin of the hyperalkaline groundwaters, and is therefore a unique location for the examination of the mechanisms and processes associated with cementitious repositories. Application of these

  5. Current european regulatory perspectives on insulin analogues

    Directory of Open Access Journals (Sweden)

    Enzmann Harald G

    2011-07-01

    Full Text Available Abstract Insulin analogues are increasingly considered as an alternative to human insulin in the therapy of diabetes mellitus. Insulin analogues (IAs are chemically different from human insulin and may have different pharmacokinetic or pharmacodynamic properties. The significance of the modifications of the insulin molecule for the safety profile of IAs must be considered. This review describes the regulatory procedure and the expectations for the scientific content of European marketing authorization applications for innovative IAs submitted to the European Medicines Agency. Particular consideration is given to a potential cancer hazard. Specific regulatory guidance on how to address a possible carcinogenic or tumor promoting effect of innovative IAs in non-clinical studies is available. After marketing authorization, the factual access of patients to the new product will be determined to great extent by health technology assessment bodies, reimbursement decisions and the price. Whereas the marketing authorization is a European decision, pricing and reimbursement are national or regional responsibilities. The assessment of benefit and risk by the European Medicines Agency is expected to influence future decisions on price and reimbursement on a national or regional level. Collaborations between regulatory agencies and health technology assessment bodies have been initiated on European and national level to facilitate the use of the European Medicines Agency's benefit risk assessment as basis on which to build the subsequent health technology assessment. The option for combined or joint scientific advice procedures with regulators and health technology assessment bodies on European level or on a national level in several European Member States may help applicants to optimize their development program and dossier preparation in regard of both European marketing authorization application and reimbursement decisions.

  6. MAQARIN natural analogue study: phase III

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, W.R.; Mazurek, M.; Waber, H.N. [Univ. of Berne (Switzerland). Institutes of Geology, Mineralogy and Petrology, Rock-Water Interaction Group (GGWW); Arlinger, J.; Erlandson, A.C.; Hallbeck, L.; Pedersen, K. [Goeteborg University (Sweden). Dept. of General and Marine Microbiology; Boehlmann, W.; Fritz, P.; Geyer, S.; Geyer, W.; Hanschman, G.; Kopinke, F.D.; Poerschmann, J. [Umweltforschungszentrum Leipzig-Halle (Germany); Chambers, A.V.; Haworth, A.; Ilett, D.; Linklater, C.M.; Tweed, C.J. [AEA Technology plc, Harwell (United Kingdom); Chenery, S.R.N.; Kemp, S.J.; Milodowski, A.E.; Pearce, J.M.; Reeder, S.; Rochelle, C.A.; Smith, B.; Wetton, P.D.; Wragg, J. [British Geological Survey, Keyworth (United Kingdom); Clark, I.D. [Univ. of Ottawa (Canada). Dept. of Geology; Hodginson, E.; Hughes, C.R. [Univ. of Manchester (United Kingdom). Dept. of Earth Sciences; Hyslop, E.K. [British Geological Survey, Edinburgh (United Kingdom); Karlsson, F. [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Khoury, H.N.; Salameh, E. [Univ. of Jordan, Amman (Jordan); Lagerblad, B. [Cement Institute, Stockholm (Sweden); Longworth, G. [Univ. of Manchester (United Kingdom). Dept. of Geology; Pitty, A.F. [Private consultant, Norwich (United Kingdom); Savage, D. [QuantiSci Ltd, Melton Mowbray (United Kingdom); Smellie, J.A.T. [ed.] [Conterra AB, Uppsala (Sweden)

    1998-12-01

    This report represents the conclusion to Phase III of the Maqarin Natural Analogue Study. The main thrust was to establish the origin and chemistry of the Western Springs hyper alkaline groundwaters (Na/K enriched Ca(OH){sub 2} type) and to study their interaction with rocks of different compositions, as natural analogues to key processes that might occur at an early stage within the `alkali disturbed zone` of cementitious repositories in different host rocks. Whilst earlier studies at Maqarin were very much site-specific and process-oriented, Phase III provided a regional perspective to the geological evolution of the Maqarin region. This was made possible by greater field access which allowed a more systematic structural and geomorphological study of the area. This has resulted in a greater understanding of the age and spatial relationships concerning formation of the cement zones through spontaneous combustion of the Bituminous Marls, and the subsequent formation of high pH groundwaters at the Eastern and Western Springs locations. At the Western Springs locality, hydrochemical and hydrogeological evaluation of new and published data (plus access to unpublished data), together with detailed mineralogical and geochemical studies, helped to clarify the very earliest stage of cement leachate/host rock interaction. The data were used also to test coupled flow/transport codes developed to assess the long-term evolution of a cementitious repository. Additional objectives addressed include: a) rock matrix diffusion, b) the occurrence and chemical controls on zeolite composition, e) the occurrence and chemical controls on clay stability, and d) the role of microbes, organics and colloids in trace element transport. The Maqarin site now provides a consistent picture explaining the origin of the hyperalkaline groundwaters, and is therefore a unique location for the examination of the mechanisms and processes associated with cementitious repositories. Application of these

  7. Evolving a polymerase for hydrophobic base analogues.

    Science.gov (United States)

    Loakes, David; Gallego, José; Pinheiro, Vitor B; Kool, Eric T; Holliger, Philipp

    2009-10-21

    Hydrophobic base analogues (HBAs) have shown great promise for the expansion of the chemical and coding potential of nucleic acids but are generally poor polymerase substrates. While extensive synthetic efforts have yielded examples of HBAs with favorable substrate properties, their discovery has remained challenging. Here we describe a complementary strategy for improving HBA substrate properties by directed evolution of a dedicated polymerase using compartmentalized self-replication (CSR) with the archetypal HBA 5-nitroindole (d5NI) and its derivative 5-nitroindole-3-carboxamide (d5NIC) as selection substrates. Starting from a repertoire of chimeric polymerases generated by molecular breeding of DNA polymerase genes from the genus Thermus, we isolated a polymerase (5D4) with a generically enhanced ability to utilize HBAs. The selected polymerase. 5D4 was able to form and extend d5NI and d5NIC (d5NI(C)) self-pairs as well as d5NI(C) heteropairs with all four bases with efficiencies approaching, or exceeding, those of the cognate Watson-Crick pairs, despite significant distortions caused by the intercalation of the d5NI(C) heterocycles into the opposing strand base stack, as shown by nuclear magnetic resonance spectroscopy (NMR). Unlike Taq polymerase, 5D4 was also able to extend HBA pairs such as Pyrene: varphi (abasic site), d5NI: varphi, and isocarbostyril (ICS): 7-azaindole (7AI), allowed bypass of a chemically diverse spectrum of HBAs, and enabled PCR amplification with primers comprising multiple d5NI(C)-substitutions, while maintaining high levels of catalytic activity and fidelity. The selected polymerase 5D4 promises to expand the range of nucleobase analogues amenable to replication and should find numerous applications, including the synthesis and replication of nucleic acid polymers with expanded chemical and functional diversity. PMID:19778048

  8. Natural analogues of nuclear waste glass corrosion

    International Nuclear Information System (INIS)

    This report reviews and summarizes studies performed to characterize the products and processes involved in the corrosion of natural glasses. Studies are also reviewed and evaluated on how well the corrosion of natural glasses in natural environments serves as an analogue for the corrosion of high-level radioactive waste glasses in an engineered geologic disposal system. A wide range of natural and experimental corrosion studies has been performed on three major groups of natural glasses: tektite, obsidian, and basalt. Studies of the corrosion of natural glass attempt to characterize both the nature of alteration products and the reaction kinetics. Information available on natural glass was then compared to corresponding information on the corrosion of nuclear waste glasses, specifically to resolve two key questions: (1) whether one or more natural glasses behave similarly to nuclear waste glasses in laboratory tests, and (2) how these similarities can be used to support projections of the long-term corrosion of nuclear waste glasses. The corrosion behavior of basaltic glasses was most similar to that of nuclear waste glasses, but the corrosion of tektite and obsidian glasses involves certain processes that also occur during the corrosion of nuclear waste glasses. The reactions and processes that control basalt glass dissolution are similar to those that are important in nuclear waste glass dissolution. The key reaction of the overall corrosion mechanism is network hydrolysis, which eventually breaks down the glass network structure that remains after the initial ion-exchange and diffusion processes. This review also highlights some unresolved issues related to the application of an analogue approach to predicting long-term behavior of nuclear waste glass corrosion, such as discrepancies between experimental and field-based estimates of kinetic parameters for basaltic glasses

  9. MAQARIN natural analogue study: phase III

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, W.R.; Mazurek, M.; Waber, H.N. [Univ. of Berne (Switzerland). Institutes of Geology, Mineralogy and Petrology, Rock-Water Interaction Group (GGWW); Arlinger, J.; Erlandson, A.C.; Hallbeck, L.; Pedersen, K. [Goeteborg Univ. (Sweden). Dept. of General and Marine Microbiology; Boehlmann, W.; Fritz, P.; Geyer, S.; Geyer, W.; Hanschman, G.; Kopinke, F.D.; Poerschmann, J. [Umweltforschungszentrum Leipzig-Halle (Germany); Chambers, A.V.; Haworth, A.; Ilett, D.; Linklater, C.M.; Tweed, C.J. [AEA Technology plc, Harwell (United Kingdom); Chenery, S.R.N.; Kemp, S.J.; Milodowski, A.E.; Pearce, J.M.; Reeder, S.; Rochelle, C.A.; Smith, B.; Wetton, P.D.; Wragg, J. [British Geological Survey, Keyworth (United Kingdom); Clark, I.D. [Univ. of Ottawa (Canada). Dept. of Geology; Hodginson, E.; Hughes, C.R. [Univ. of Manchester (United Kingdom). Dept. of Earth Sciences; Hyslop, E.K. [British Geological Survey, Edinburgh (United Kingdom); Karlsson, F. [Swedish Nuclear Fuel and Waste Management Co., Stockholm (Sweden); Khoury, H.N.; Salameh, E. [Univ. of Jordan, Amman (Jordan); Lagerblad, B. [Cement Inst., Stockholm (Sweden); Longworth, G. [Univ. of Manchester (United Kingdom). Dept. of Geology; Pitty, A.F. [Private consultant, Norwich (United Kingdom); Savage, D. [QuantiSci Ltd, Melton Mowbray (United Kingdom); Smellie, J.A.T. [ed.] [Conterra AB, Uppsala (Sweden)

    1998-12-01

    This report represents the conclusion to Phase III of the Maqarin Natural Analogue Study. The main thrust was to establish the origin and chemistry of the Western Springs hyper alkaline groundwaters (Na/K enriched Ca(OH){sub 2} type) and to study their interaction with rocks of different compositions, as natural analogues to key processes that might occur at an early stage within the `alkali disturbed zone` of cementitious repositories in different host rocks. Whilst earlier studies at Maqarin were very much site-specific and process-oriented, Phase III provided a regional perspective to the geological evolution of the Maqarin region. This was made possible by greater field access which allowed a more systematic structural and geomorphological study of the area. This has resulted in a greater understanding of the age and spatial relationships concerning formation of the cement zones through spontaneous combustion of the Bituminous Marls, and the subsequent formation of high pH groundwaters at the Eastern and Western Springs locations. At the Western Springs locality, hydrochemical and hydrogeological evaluation of new and published data (plus access to unpublished data), together with detailed mineralogical and geochemical studies, helped to clarify the very earliest stage of cement leachate/host rock interaction. The data were used also to test coupled flow/transport codes developed to assess the long-term evolution of a cementitious repository. Additional objectives addressed include: a) rock matrix diffusion, b) the occurrence and chemical controls on zeolite composition, e) the occurrence and chemical controls on clay stability, and d) the role of microbes, organics and colloids in trace element transport. The Maqarin site now provides a consistent picture explaining the origin of the hyperalkaline groundwaters, and is therefore a unique location for the examination of the mechanisms and processes associated with cementitious repositories. Application of these

  10. HDF Augmentation: Interoperability in the Last Mile

    Science.gov (United States)

    Plutchak, J.; Folk, M. J.; Habermann, T.; Knox, L.

    2014-12-01

    Science data files are generally written to serve well-defined purposes for a small science teams. In many cases, the organization of the data and the metadata are designed for custom tools developed and maintained by and for the team. Using these data outside of this context many times involves restructuring, re-documenting, or reformatting the data. This expensive and time-consuming process usually prevents data reuse and thus decreases the total life-cycle value of the data considerably. If the data are unique or critically important to solving a particular problem, they can be modified into a more generally usable form or metadata can be added in order to enable reuse. This augmentation process can be done to enhance data for the intended purpose or for a new purpose, to make the data available to new tools and applications, to make the data more conventional or standard, or to simplify preservation of the data. The HDF Group has addressed augmentation needs in many ways: by adding extra information, by renaming objects or moving them around in the file, by reducing complexity of the organization, and sometimes by hiding data objects that are not understood by specific applications. In some cases these approaches require re-writing the data into new files and in some cases it can be done externally, without affecting the original file. We will describe and compare several examples of each approach.

  11. Performance of a solar augmented heat pump

    Science.gov (United States)

    Bedinger, A. F. G.; Tomlinsin, J. J.; Reid, R. L.; Chaffin, D. J.

    Performance results from a test house equipped with a parallel solar augmented heat pump system with off-peak storage and a utility interconnection back-up, are presented. The collector array consisted of 12 air heating flat plates with a 9 l/sec flow. Thermal storage was consigned to a 260 cu ft crushed limestone pebble bed, with an 8.8 kW heat pump used to draw heat from storage during off-peak hours and a 15 kW electrical resistance heater used to charge the pebble bed. Monitoring and data recording were carried out on all energy inputs and outputs of the systems, and a modified TRNSYS program was employed to model the system performance. The data indicate that although the system offered the possibility of reducing the utility capacity, the addition of the solar system did not significantly augment the performance of the heat-pump system, at least in terms of the cost of supplementary electricity.

  12. Prospects for optogenetic augmentation of brain function

    Directory of Open Access Journals (Sweden)

    Sarah eJarvis

    2015-11-01

    Full Text Available The ability to optically control neural activity opens up possibilities for the restoration of normal function following neurological disorders. The temporal precision, spatial resolution and neuronal specificity that optogenetics offers is unequalled by other available methods, so will it be suitable for not only restoring but also extending brain function? As the first demonstrations of optically ``implanted'' novel memories emerge, we examine the suitability of optogenetics as a technique for extending neural function. While optogenetics is an effective tool for altering neural activity, the largest impediment for optogenetics in neural augmentation is our systems level understanding of brain function. Furthermore, a number of clinical limitations currently remain as substantial hurdles for the applications proposed. While neurotechnologies for treating brain disorders and interfacing with prosthetics have advanced rapidly in the past few years, partially addressing some of these critical problems, optogenetics is not yet suitable for use in humans. Instead we conclude that for the immediate future, optogenetics is the neurological equivalent of the 3D printer: its flexibility providing an ideal tool for testing and prototyping solutions for treating brain disorders and augmenting brain function.

  13. Virtually-augmented interfaces for tactical aircraft.

    Science.gov (United States)

    Haas, M W

    1995-05-01

    The term Fusion Interface is defined as a class of interface which integrally incorporates both virtual and non-virtual concepts and devices across the visual, auditory and haptic sensory modalities. A fusion interface is a multi-sensory virtually-augmented synthetic environment. A new facility has been developed within the Human Engineering Division of the Armstrong Laboratory dedicated to exploratory development of fusion-interface concepts. One of the virtual concepts to be investigated in the Fusion Interfaces for Tactical Environments facility (FITE) is the application of EEG and other physiological measures for virtual control of functions within the flight environment. FITE is a specialized flight simulator which allows efficient concept development through the use of rapid prototyping followed by direct experience of new fusion concepts. The FITE facility also supports evaluation of fusion concepts by operational fighter pilots in a high fidelity simulated air combat environment. The facility was utilized by a multi-disciplinary team composed of operational pilots, human-factors engineers, electronics engineers, computer scientists, and experimental psychologists to prototype and evaluate the first multi-sensory, virtually-augmented cockpit. The cockpit employed LCD-based head-down displays, a helmet-mounted display, three-dimensionally localized audio displays, and a haptic display. This paper will endeavor to describe the FITE facility architecture, some of the characteristics of the FITE virtual display and control devices, and the potential application of EEG and other physiological measures within the FITE facility.

  14. Augmenting Probabilistic Risk Assesment with Malevolent Initiators

    Energy Technology Data Exchange (ETDEWEB)

    Curtis Smith; David Schwieder

    2011-11-01

    As commonly practiced, the use of probabilistic risk assessment (PRA) in nuclear power plants only considers accident initiators such as natural hazards, equipment failures, and human error. Malevolent initiators are ignored in PRA, but are considered the domain of physical security, which uses vulnerability assessment based on an officially specified threat (design basis threat). This paper explores the implications of augmenting and extending existing PRA models by considering new and modified scenarios resulting from malevolent initiators. Teaming the augmented PRA models with conventional vulnerability assessments can cost-effectively enhance security of a nuclear power plant. This methodology is useful for operating plants, as well as in the design of new plants. For the methodology, we have proposed an approach that builds on and extends the practice of PRA for nuclear power plants for security-related issues. Rather than only considering 'random' failures, we demonstrated a framework that is able to represent and model malevolent initiating events and associated plant impacts.

  15. Augmentation of Pedicle Screw Fixation with Calcium Phosphate Cement

    Institute of Scientific and Technical Information of China (English)

    YANG Shu-hua; FU De-hao; LI Jin; XU Wei-hua; YANG Cao; YE Zhe-wei; ZUO Xiao-yan

    2004-01-01

    To determine whether a biodegradable calcium phosphate cement(CPC) provides significant augmentation of pedicle screw fixation or not,an in vitro biomechanical study was carried out to evaluate the biomechanical effect of CPC in the restoration and augmentation of pedicle screw fixation.Axial pullout test and cyclic bending resistance test were employed in the experiment,and polymethylmethacrylate (PMMA) was chosen as control.The results demonstrate that the pullout strengths following CPC restoration and augmentation are 74% greater on an average than those of the control group,but less than those of PMMA restoration group and augmentation group respectively (increased by 126% versus control).In cyclic bending resistance test,the CPC augmented screws are found to withstand a greater number of cycles or greater loading with less displacement before loosening,but the augmentation effect of PMMA is greater than that of CPC.

  16. Analogues of uracil nucleosides with intrinsic fluorescence (NIF-analogues): synthesis and photophysical properties.

    Science.gov (United States)

    Segal, Meirav; Fischer, Bilha

    2012-02-28

    Uridine cannot be utilized as fluorescent probe due to its extremely low quantum yield. For improving the uracil fluorescence characteristics we extended the natural chromophore at the C5 position by coupling substituted aromatic rings directly or via an alkenyl or alkynyl linker to create fluorophores. Extension of the uracil base was achieved by treating 5-I-uridine with the appropriate boronic acid under the Suzuki coupling conditions. Analogues containing an alkynyl linker were obtained from 5-I-uridine and the suitable boronic acid in a Sonogashira coupling reaction. The uracil fluorescent analogues proposed here were designed to satisfy the following requirements: a minimal chemical modification at a position not involved in base-pairing, resulting in relatively long absorption and emission wavelengths and high quantum yield. 5-((4-Methoxy-phenyl)-trans-vinyl)-2'-deoxy-uridine, 6b, was found to be a promising fluorescent probe. Probe 6b exhibits a quantum yield that is 3000-fold larger than that of the natural chromophore (Φ 0.12), maximum emission (478 nm) which is 170 nm red shifted as compared to uridine, and a Stokes shift of 143 nm. In addition, since probe 6b adopts the anti conformation and S sugar puckering favored by B-DNA, it makes a promising nucleoside analogue to be incorporated in an oligonucleotide probe for detection of genetic material.

  17. Analogue to Digital and Digital to Analogue (AD/DA) Conversion Techniques: An Overview

    CERN Document Server

    CERN. Geneva

    2002-01-01

    The basic ideas behind modern Analogue to Digital and Digital to Analogue (AD/DA) conversion methods will be introduced: a general view of the importance of these devices will be given, along with the digital representation of time-varying, real-world analogue signals. Some CERN applications will be outlined. The variety of conversion methods, their limitations, error sources and measurement methods will form the major part of this presentation. A review of the technological progress in this field over the last 30 years will be presented, concluding with the present 'state of the art' and a quick look at what is just around the corner. This Technical Training Seminar is in the framework of the FEED-2002 Lecture Series, and it is a prerequisite to attending to any of the FEED-2002 Terms. FEED-2002 is a two-term course that will review the techniques dealing with closed loop systems, focussing on time-invariant linear systems. (free attendance, no registration required) More information on the FEED-2002 ...

  18. Integrative Augmentation with the New ISO 10000 Standards1

    OpenAIRE

    Karapetrovic Stanislav

    2014-01-01

    Application and integration of the systems based on ISO 10001: 2007 and other new augmentative standards are discussed. Particular attention is paid to the quality management standards forming the front end of the ISO 10000 series, namely ISO 10001, ISO 10002 and ISO 10003, as well as ISO 19011, the standard which stems from the original augmentative ISO 10000 guideline, specifically ISO 10011 on quality auditing. The ability of these and other similar standards to augment the performance of ...

  19. Augmented sculptures: what you see is not what you see

    OpenAIRE

    Artut, Selçuk Hüseyin; Artut, Selcuk Huseyin

    2015-01-01

    The idea of Augmented Reality Technologies enhances our ability to perceive a location with additional 3D visual elements. A point of interest becomes meta-constructed with addition of extended layers via augmented space elements. Augmented Reality presents us a virtually enriched version of a visually noticeable reality world which already exists and can easily be seen. In this article, in addition to questioning the representative existence of the art object in the work of art called “What ...

  20. Towards an interactive medical system by augmented reality

    OpenAIRE

    Khawla Ben Abderrahim; Mohamed Kallel; M. S. Bouhlel

    2013-01-01

    Augmented reality is a computer field that progresses rapidly. Its principle is to mix the real world and the virtual world. Many applications already use augmented reality, particularly the medical field. Medical image allows doctors to make diagnosis of the patient. This diagnosis allows him to make the best decision without committing professional mistakes that can cause problems. Hence the idea of integrating augmented reality with medical image analysis to help the doctor to make the bes...

  1. Maintenance applications of augmented reality for the Chinese aerospace industry

    OpenAIRE

    Ou, Peng

    2011-01-01

    Since augmented reality has not reached full maturity in use, it is not widely adopted within the aerospace industry. According to the literature review, minimal research efforts have been conducted to assess the cost-benefit or cost- effectiveness of augmented reality so far. Moreover, to the best of researcher’s knowledge, no research has been carried out to develop a systematic process for selecting and implementing augmented reality within the Chinese aerospace industry....

  2. Augmented Reality Games on the iPhone

    OpenAIRE

    Rösler, Amanda

    2009-01-01

    Augmented reality opens up a lot of possibilities for new types of games, where the real and the virtual world are mixed. Despite this, augmented reality games are still not very common, probably due to the fact that head-mounted displays (which are often used for augmented reality) are expensive. However, in recent years mobile phones have become more and more powerful, and since many of them have built-in cameras and rather large screens, they are a potential platform for augmented reality ...

  3. Optimal Constellation Design for Satellite Based Augmentation System

    Science.gov (United States)

    Kawano, Isao

    Global Positioning System (GPS) is widely utilized in daily life, for instance car navigation. Wide Area Augmentation System (WAAS) and Local Area Augmentation System (LAAS) are proposed so as to provide GPS better navigation accuracy and integrity capability. Satellite Based Augmentation System (SBAS) is a kind of WAAS and Multi-functional Transportation Satellite (MTSAT) has been developed in Japan. To improve navigation accuracy most efficiently, augmentation satellites should be so placed that minimize Geometric Dilution of Precision (GDOP) of constellation. In this paper the result of optimal constellation design for SBAS is shown.

  4. The Greenland Analogue Project. Yearly Report 2009

    International Nuclear Information System (INIS)

    A deep geological repository for spent nuclear fuel needs to be designed to keep used nuclear fuel isolated from mankind and the environment for a million years. Within this time frame glacial conditions are expected in regions that have been glaciated in the past two to ten million years. Climate induced changes such as the growth of ice sheets and permafrost will influence and alter the ground surface and subsurface environment, including its hydrology, which may impact repository safety. Glaciation impact assessments have to-date used over-simplified models and conservative assumptions, for example in the representation of ice sheet hydrology, that do not reflect the complexity of natural systems and processes. This is largely due to lack of direct observations of such processes from existing ice sheets, which if more readily available could help reduce uncertainties and provide a strong scientific basis for the treatment of glacial impacts in safety assessments. Our current understanding of the hydrological, hydrogeological and hydrogeochemical processes associated with glacial cycles and their impact on the long-term performance of deep geological repositories for spent nuclear fuel will be significantly improved by studying a modern analogue. To advance the understanding of processes associated with glaciation and their impact on the long-term performance of a deep geological repository, the Greenland Analogue Project (GAP), a four-year field and modelling study of the Greenland ice sheet and sub-surface conditions, has been initiated collaboratively by SKB, Posiva and NWMO. The study site encompasses a land terminus portion of the Greenland ice sheet east of Kangerlussuaq and is in many ways considered to be an appropriate analogue of the conditions that are expected to prevail in much of Canada and Fennoscandia during future glacial cycles. The project is planned to run from 2009 until 2012. The GAP will conduct the first in situ investigations of some of

  5. The Greenland Analogue Project. Yearly Report 2009

    Energy Technology Data Exchange (ETDEWEB)

    2010-12-15

    A deep geological repository for spent nuclear fuel needs to be designed to keep used nuclear fuel isolated from mankind and the environment for a million years. Within this time frame glacial conditions are expected in regions that have been glaciated in the past two to ten million years. Climate induced changes such as the growth of ice sheets and permafrost will influence and alter the ground surface and subsurface environment, including its hydrology, which may impact repository safety. Glaciation impact assessments have to-date used over-simplified models and conservative assumptions, for example in the representation of ice sheet hydrology, that do not reflect the complexity of natural systems and processes. This is largely due to lack of direct observations of such processes from existing ice sheets, which if more readily available could help reduce uncertainties and provide a strong scientific basis for the treatment of glacial impacts in safety assessments. Our current understanding of the hydrological, hydrogeological and hydrogeochemical processes associated with glacial cycles and their impact on the long-term performance of deep geological repositories for spent nuclear fuel will be significantly improved by studying a modern analogue. To advance the understanding of processes associated with glaciation and their impact on the long-term performance of a deep geological repository, the Greenland Analogue Project (GAP), a four-year field and modelling study of the Greenland ice sheet and sub-surface conditions, has been initiated collaboratively by SKB, Posiva and NWMO. The study site encompasses a land terminus portion of the Greenland ice sheet east of Kangerlussuaq and is in many ways considered to be an appropriate analogue of the conditions that are expected to prevail in much of Canada and Fennoscandia during future glacial cycles. The project is planned to run from 2009 until 2012. The GAP will conduct the first in situ investigations of some of

  6. Transaxillary endoscopic silicone gel breast augmentation.

    Science.gov (United States)

    Strock, Louis L

    2010-09-01

    Following the return of silicone gel breast implants to the US market in 2006, augmentation with these implants has become increasingly popular. Surgeons have an array of refined techniques from which to choose when performing these procedures, many of which offer the advantage of reduced or less-obvious postoperative scarring. For obvious reasons, many patients are requesting placement of the implants through incisions that are removed from the breast area (and thereby hidden). The challenge of these approaches is to provide a level of technical control that matches what is afforded with the traditional inframammary approach. The addition of endoscopic assistance has provided a level of tissue visualization and technical control not previously possible with the transaxillary approach, with results that rival those of an inframammary procedure. In this article, the author presents his current operative technique, which has allowed for the routine placement of silicone gel breast implants through a transaxillary incision using endoscopic assistance.

  7. Axillary silicone lymphadenopathy secondary to augmentation mammaplasty

    Directory of Open Access Journals (Sweden)

    Dragoumis Dimitrios

    2010-01-01

    Full Text Available We report a case involving a 45-year-old woman, who presented with an axillary mass 10 years after bilateral cosmetic augmentation mammaplasty. A lump was detected in the left axilla, and subsequent mammography and magnetic resonance imaging demonstrated intracapsular rupture of the left breast prosthesis. An excisional biopsy of the left axillary lesion and replacement of the ruptured implant was performed. Histological analysis showed that the axillary lump was lymph nodes containing large amounts of silicone. Silicone lymphadenopathy is an obscure complication of procedures involving the use of silicone. It is thought to occur following the transit of silicone droplets from breast implants to lymph nodes by macrophages and should always be considered as a differential diagnosis in patients in whom silicone prostheses are present.

  8. Augmented reality. Fundamentals and nuclear related applications

    International Nuclear Information System (INIS)

    In recent years, Augmented Reality (AR) has attracted considerable interest from both academia and industry. Virtual Reality enables users to interact only with virtual objects in a virtual environment, but AR enables users to interact with both virtual objects and real objects in the real world. This feature supports application of AR to various fields such as education, driving, entertainment, and navigation. Especially, by application of AR to support workers in nuclear power plants, it is expected that working time and human error can be decreased. However, many problems remain unsolved to apply AR to real fields. In this lecture note, fundamental knowledge of AR is presented first including the overview of elemental technologies to realize AR. Then various AR applications to nuclear fields are described. Finally, future prospects are given. (author)

  9. Extended overview techniques for outdoor augmented reality.

    Science.gov (United States)

    Veas, Eduardo; Grasset, Raphaël; Kruijff, Ernst; Schmalstieg, Dieter

    2012-04-01

    In this paper, we explore techniques that aim to improve site understanding for outdoor Augmented Reality (AR) applications. While the first person perspective in AR is a direct way of filtering and zooming on a portion of the data set, it severely narrows overview of the situation, particularly over large areas. We present two interactive techniques to overcome this problem: multi-view AR and variable perspective view. We describe in details the conceptual, visualization and interaction aspects of these techniques and their evaluation through a comparative user study. The results we have obtained strengthen the validity of our approach and the applicability of our methods to a large range of application domains. PMID:22402683

  10. Temporal Coherence Strategies for Augmented Reality Labeling.

    Science.gov (United States)

    Madsen, Jacob Boesen; Tatzqern, Markus; Madsen, Claus B; Schmalstieg, Dieter; Kalkofen, Denis

    2016-04-01

    Temporal coherence of annotations is an important factor in augmented reality user interfaces and for information visualization. In this paper, we empirically evaluate four different techniques for annotation. Based on these findings, we follow up with subjective evaluations in a second experiment. Results show that presenting annotations in object space or image space leads to a significant difference in task performance. Furthermore, there is a significant interaction between rendering space and update frequency of annotations. Participants improve significantly in locating annotations, when annotations are presented in object space, and view management update rate is limited. In a follow-up experiment, participants appear to be more satisfied with limited update rate in comparison to a continuous update rate of the view management system. PMID:26780810

  11. Development of the augmented musculature device.

    Energy Technology Data Exchange (ETDEWEB)

    Rohrer, Brandon Robinson; Pankretz, Ty

    2004-12-01

    We developed an Augmented Musculature Device (AMD) that assists the movements of its wearer. It has direct application to aiding military and law enforcement personnel, the neurologically impaired, or those requiring any type of cybernetic assistance. The AMD consists of a collection of artificial muscles, each individually actuated, strategically placed along the surface of the human body. The actuators employed by the AMD are known as 'air muscles' and operate pneumatically. They are commercially available from several vendors and are relatively inexpensive. They have a remarkably high force-to-weight ratio--as high as 400:1 (as compared with 16:1 typical of DC motors). They are flexible and elastic, even when powered, making them ideal for interaction with humans.

  12. Camera Augmented Mobile C-arm

    Science.gov (United States)

    Wang, Lejing; Weidert, Simon; Traub, Joerg; Heining, Sandro Michael; Riquarts, Christian; Euler, Ekkehard; Navab, Nassir

    The Camera Augmented Mobile C-arm (CamC) system that extends a regular mobile C-arm by a video camera provides an X-ray and video image overlay. Thanks to the mirror construction and one time calibration of the device, the acquired X-ray images are co-registered with the video images without any calibration or registration during the intervention. It is very important to quantify and qualify the system before its introduction into the OR. In this communication, we extended the previously performed overlay accuracy analysis of the CamC system by another clinically important parameter, the applied radiation dose for the patient. Since the mirror of the CamC system will absorb and scatter radiation, we introduce a method for estimating the correct applied dose by using an independent dose measurement device. The results show that the mirror absorbs and scatters 39% of X-ray radiation.

  13. Digital Facial Augmentation for Interactive Entertainment

    Directory of Open Access Journals (Sweden)

    Naoto Hieda

    2015-08-01

    Full Text Available Digital projection technology allows for effective and entertaining spatial augmented reality applications. Leveraging the capabilities of reasonably accurate object tracking using commodity cameras and/or depth sensors to determine the 3D position and pose of objects in real time, it is possible to project dynamic graphical content on arbitrary surfaces, such as a person’s face. Coupling these capabilities with a simple drawing application, participants can have the experience of "painting" on someone’s face, or even on their own, by observing the projection in a mirror. Similarly, integrating 2D rigid-body, fluid and gravity simulation, one may interact with virtual objects projected on their own face or body.

  14. Status of Magnetohydrodynamic Augmented Propulsion Experiment

    Science.gov (United States)

    Litchford, Ron J.; Lineberry, John T.

    2007-01-01

    Over the past several years, efforts have been under way to design and develop an operationally flexible research facility for investigating the use of cross-field MHD accelerators as a potential thrust augmentation device for thermal propulsion systems, The baseline configuration for this high-power experimental facility utilizes a 1,5-MW, multi-gas arc-heater as a thermal driver for a 2-MW, MHD accelerator, which resides in a large-bore 2-tesla electromagnet. A preliminary design study using NaK seeded nitrogen as the working fluid led to an externally diagonalized segmented MHD channel configuration based on an expendable beat-sink design concept. The current status report includes a review of engineering/design work and performance optimization analyses and summarizes component hardware fabrication and development efforts, preliminary testing results, and recent progress toward full-up assembly and testing

  15. Evolving neural networks through augmenting topologies.

    Science.gov (United States)

    Stanley, Kenneth O; Miikkulainen, Risto

    2002-01-01

    An important question in neuroevolution is how to gain an advantage from evolving neural network topologies along with weights. We present a method, NeuroEvolution of Augmenting Topologies (NEAT), which outperforms the best fixed-topology method on a challenging benchmark reinforcement learning task. We claim that the increased efficiency is due to (1) employing a principled method of crossover of different topologies, (2) protecting structural innovation using speciation, and (3) incrementally growing from minimal structure. We test this claim through a series of ablation studies that demonstrate that each component is necessary to the system as a whole and to each other. What results is significantly faster learning. NEAT is also an important contribution to GAs because it shows how it is possible for evolution to both optimize and complexify solutions simultaneously, offering the possibility of evolving increasingly complex solutions over generations, and strengthening the analogy with biological evolution. PMID:12180173

  16. Out of the Cube: Augmented Rubik's Cube

    Directory of Open Access Journals (Sweden)

    Oriel Bergig

    2011-01-01

    Full Text Available Computer gaming habits have a tendency to evolve with technology, the best being ones that immerse both our imagination and intellect. Here, we describe a new game platform, an Augmented Reality Rubik's cube. The cube acts simultaneously as both the controller and the game board. Gameplay is controlled by the cube, and game assets are rendered on top of it. Shuffling and tilting operations on the cube are mapped to game interaction. We discuss the game design decisions involved in developing a game for this platform, as well as the technological challenges in implementing it. Ultimately, we describe two games and discuss the conclusions of an informal user study based on those games.

  17. Reconfigurable hardware for an augmented reality application

    Science.gov (United States)

    Toledo Moreo, F. Javier; Martinez Alvarez, J. Javier; Garrigos Guerrero, F. Javier; Ferrandez Vicente, J. Manuel

    2005-06-01

    An FPGA-based approach is proposed to build an augmented reality system in order to aid people affected by a visual disorder known as tunnel vision. The aim is to increase the user's knowledge of his environment by superimposing on his own view useful information obtained with image processing. Two different alternatives have been explored to perform the required image processing: a specific purpose algorithm to extract edge detection information, and a cellular neural network with the suitable template. Their implementations in reconfigurable hardware pursue to take advantage of the performance and flexibility that show modern FPGAs. This paper describes the hardware implementation of both the Canny algorithm and the cellular neural network, and the overall system architecture. Results of the implementations and examples of the system functionality are presented.

  18. Googles Augmented-Reality-Game "Ingress"

    Directory of Open Access Journals (Sweden)

    Karl H. Stingeder

    2013-12-01

    Full Text Available Das an das "Geocoaching"-Spielprinzip erinnernde Augmented-­Reality-Game "Ingress" ist auf allen mit Android-Betriebssystem ausgestatteten Smartphones spielbar. Das Alleinstellungsmerkmal des Spiels ist gleich­zeitig auch das beste Patent-Rezept für bzw. gegen notorisches "Couch-Potato-ing": Das Game-Design des "Draußenspiels" erfordert jedoch stets die physische Anwesenheit der SpielerInnen am realen Ort des Geschehens, meist touristisch attraktive Sehenswürdigkeiten und architektonisch markante Plätze. Sobald "Ingress" per App am Smart­phone gestartet wird, stehen Interaktionen und Machtverhältnisse auf dem Handy-Display im Dreh- und Angelpunkt des Geschehens. Die Spielgrafik ist auf das Wesentliche reduziert und erinnert an die Optik von Videospielen der 80er Jahre. "Ingress" im Allgemeinen sowie "Magnus13", die erste von Google organisierte Fan-Veranstaltung Österreichs mit mehreren Hundert TeilnehmerInnen und ist mit einer "digitalen Schnitzeljagd" vergleichbar: Gemeinsam ist der klassischen "Schnitzeljagd" und dem digitalen "Schere-Schein-Papier" Prinzip von "Ingress" die tragende Rolle des im Spiel entstehenden Gemeinschaftsgefühls, welche in einer hohen Langzeitmotivation mündet. Trotz aller Euphorie, ob des unkonventionellen Augmented-Reality-Spielkonzepts und des in Folge der sozialen Dynamik außergewöhnlichen Sucht­potentials, ist angesichts von Edward Snowden und vielfältiger NSA-Abhörmaßnahmen, eine gesunde Portion Skepsis angebracht: Welchen Zweck erfüllt "Ingress"? Gibt es ein verhülltes "Mittel zum Zweck"? Welche Gefahren bestehen mit einer systematischen Auswertung des umfangreichen, ortsrelevanten Daten-Sammelsuriums? "Ingress" verdeutlicht trotz aller Risiken den soziokulturellen Bedeutungswandel des digitalen Spiels: Spiele per se und das Spiel als soziale Interaktion sind aktuell dabei, alle Bereiche unseres Lebens zu erfassen.

  19. Performance of a solar augmented heat pump

    Science.gov (United States)

    Bedinger, A. F. G.; Tomlinson, J. J.; Reid, R. L.; Chaffin, D. J.

    Performance of a residential size solar augmented heat pump is reported for the 1979-1980 heating season. The facility located in Knoxville, Tennessee, has a measured heat load coefficient of 339.5 watt/C (644 BTU/hr- F). The solar augmented heat pump system consists of 7.4 cu m of one inch diameter crushed limestone. The heat pump is a nominal 8.8 KW (2 1/2 ton) high efficiency unit. The system includes electric resistance heaters to give the option of adding thermal energy to the pebble bed storage during utility off-peak periods, thus offering considerable load management capability. A 15 KW electric resistance duct heater is used to add thermal energy to the pebble bin as required during off-peak periods. Hourly thermal performance and on site weather data was taken for the period November 1, 1979, to April 13, 1980. Thermal performance data consists of heat flow summations for all modes of the system, pebble bed temperatures, and space temperature. Weather data consists of dry bulb temperature, dew point temperature, total global insolation (in the plane of the collector), and wind speed and direction. An error analysis was performed and the least accurate of the measurements was determined to be the heat flow at 5%. Solar system thermal performance factor was measured to be 8.77. The heat pump thermal performance factor was 1.64. Total system seasonal performance factor was measured to be 1.66. Using a modified version of TRNSYS, the thermal performance of this system was simulated. When simulation results were compared with data collected onsite, the predicted heat flow and power consumption generally were within experimental accuracy.

  20. Synthesis, antiarrhythmic activity, and toxicological evaluation of mexiletine analogues.

    Science.gov (United States)

    Roselli, Mariagrazia; Carocci, Alessia; Budriesi, Roberta; Micucci, Matteo; Toma, Maddalena; Di Cesare Mannelli, Lorenzo; Lovece, Angelo; Catalano, Alessia; Cavalluzzi, Maria Maddalena; Bruno, Claudio; De Palma, Annalisa; Contino, Marialessandra; Perrone, Maria Grazia; Colabufo, Nicola Antonio; Chiarini, Alberto; Franchini, Carlo; Ghelardini, Carla; Habtemariam, Solomon; Lentini, Giovanni

    2016-10-01

    Four mexiletine analogues have been tested for their antiarrhythmic, inotropic, and chronotropic effects on isolated guinea pig heart tissues and to assess calcium antagonist activity, in comparison with the parent compound mexiletine. All analogues showed from moderate to high antiarrhythmic activity. In particular, three of them (1b,c,e) were more active and potent than the reference drug, while exhibiting only modest or no negative inotropic and chronotropic effects and vasorelaxant activity, thus showing high selectivity of action. All compounds showed no cytotoxicity and 1b,c,d did not impair motor coordination. All in, these new analogues exhibit an interesting cardiovascular profile and deserve further investigation. PMID:27267000

  1. Mobile Cloud Computing: A Review on Smartphone Augmentation Approaches

    OpenAIRE

    Abolfazli, Saeid; Sanaei, Zohreh; Gani, Abdullah

    2012-01-01

    Smartphones have recently gained significant popularity in heavy mobile processing while users are increasing their expectations toward rich computing experience. However, resource limitations and current mobile computing advancements hinder this vision. Therefore, resource-intensive application execution remains a challenging task in mobile computing that necessitates device augmentation. In this article, smartphone augmentation approaches are reviewed and classified in two main groups, name...

  2. Maxillary sinus augmentation with microstructured tricalcium phosphate ceramic in sheep.

    NARCIS (Netherlands)

    Klijn, R.J.; Hoekstra, J.W.M.; Beucken, J.J.J.P van den; Meijer, G.J.; Jansen, J.B.M.J.

    2012-01-01

    OBJECTIVE: The objective of this study was to evaluate the biological performance of osteoinductive microstructured tricalcium phosphate (MSTCP) particles in maxillary sinus floor augmentation surgery in sheep. MATERIAL AND METHODS: Sinus floor augmentation was performed in eight Swifter sheep. In e

  3. Augmenting a Child's Reality: Using Educational Tablet Technology

    Science.gov (United States)

    Tanner, Patricia; Karas, Carly; Schofield, Damian

    2014-01-01

    This study investigates the classroom integration of an innovative technology, augmented reality. Although the process of adding new technologies into a classroom setting can be daunting, the concept of augmented reality has demonstrated the ability to educate students and to assist with their comprehension of a procedural task. One half of the…

  4. 14 CFR 91.1061 - Augmented flight crews.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Augmented flight crews. 91.1061 Section 91...) AIR TRAFFIC AND GENERAL OPERATING RULES GENERAL OPERATING AND FLIGHT RULES Fractional Ownership Operations Program Management § 91.1061 Augmented flight crews. (a) No program manager may assign any...

  5. Routine sensor-augmented pump therapy in type 1 diabetes

    DEFF Research Database (Denmark)

    Nørgaard, Kirsten; Scaramuzza, Andrea; Bratina, Natasa;

    2013-01-01

    Sensor-augmented pump (SAP) therapy can improve glycemic control, compared with multiple daily insulin injections or with insulin pump therapy alone, without increasing the risk of hypoglycemia.......Sensor-augmented pump (SAP) therapy can improve glycemic control, compared with multiple daily insulin injections or with insulin pump therapy alone, without increasing the risk of hypoglycemia....

  6. Sensor-augmented pump therapy at 36 months

    DEFF Research Database (Denmark)

    Schmidt, Signe; Nørgaard, Kirsten

    2012-01-01

    This follow-up study investigates the metabolic and psychosocial effects of sensor-augmented pump (SAP) therapy in adults with type 1 diabetes 36 months after therapy start.......This follow-up study investigates the metabolic and psychosocial effects of sensor-augmented pump (SAP) therapy in adults with type 1 diabetes 36 months after therapy start....

  7. Intravenous alpha-1 antitrypsin augmentation therapy: systematic review

    DEFF Research Database (Denmark)

    Gøtzsche, Peter C; Johansen, Helle Krogh

    2010-01-01

    We reviewed the benefits and harms of augmentation therapy with alpha-1 antitrypsin in patients with alpha-1 antitrypsin deficiency and lung disease. We searched for randomised trials comparing augmentation therapy with placebo or no treatment in PubMed and ClinicalTrials (7 January 2010). Two...

  8. Augmentative biological control of arthropods in Latin America

    NARCIS (Netherlands)

    Lenteren, van J.C.; Bueno, V.H.P.

    2003-01-01

    Augmentative forms of biological control, where natural enemies are periodically introduced, are applied over large areas in various cropping systems in Latin America. About 25% of the world area under augmentative control is situated in this region. Well-known examples are the use of species of the

  9. Pose estimation for mobile devices and augmented reality

    NARCIS (Netherlands)

    Caarls, J.

    2009-01-01

    In this thesis we introduce the reader to the field of Augmented Reality (AR) and describe aspects of an AR system. We show the current uses in treatment of phobias, games, sports and industry. We present the challenges for Optical See-Through Augmented Reality in which the real world is perceived n

  10. On Location Learning: Authentic Applied Science with Networked Augmented Realities

    Science.gov (United States)

    Rosenbaum, Eric; Klopfer, Eric; Perry, Judy

    2007-01-01

    The learning of science can be made more like the practice of science through authentic simulated experiences. We have created a networked handheld Augmented Reality environment that combines the authentic role-playing of Augmented Realities and the underlying models of Participatory Simulations. This game, known as Outbreak @ The Institute, is…

  11. Augmented Reality, the Future of Contextual Mobile Learning

    Science.gov (United States)

    Sungkur, Roopesh Kevin; Panchoo, Akshay; Bhoyroo, Nitisha Kirtee

    2016-01-01

    Purpose: This study aims to show the relevance of augmented reality (AR) in mobile learning for the 21st century. With AR, any real-world environment can be augmented by providing users with accurate digital overlays. AR is a promising technology that has the potential to encourage learners to explore learning materials from a totally new…

  12. The Local Games Lab ABQ: Homegrown Augmented Reality

    Science.gov (United States)

    Holden, Christopher

    2014-01-01

    Experiments in the use of augmented reality games formerly required extensive material resources and expertise to implement above and beyond what might be possible within the usual educational contexts. Currently, the more common availability of hardware in these contexts and the existence of easy-to-use, general purpose augmented reality design…

  13. Complications 15 years after breast augmentation with polyacrylamide

    DEFF Research Database (Denmark)

    Ghasemi, Habib; Damsgaard, Tine Engberg; Stolle, Lars Bjørn;

    2015-01-01

    Polyacrylamide hydrogel (PAAG) has been used as an injectable, permanent filler for soft-tissue augmentation for more than two decades. Several complications have been reported worldwide. In this case report, we present a woman with long-term complications 15 years after bilateral breast...... augmentation with PAAG injections....

  14. Augmenting cognition: Reviewing the symbiotic relation between man and machine

    NARCIS (Netherlands)

    Greef, T.E. de; Dongen, C.J.G. van; Grootjen, M.; Lindenberg, J.

    2007-01-01

    One of the goals of augmented cognition is creation of adaptive human-machine collaboration that continually optimizes performance of the human-machine system. Augmented Cognition aims to compensate for temporal limitations in human information processing, for instance in the case of overload, cogni

  15. RECONSTRUCTION OF TOLLANXICOCOTITLAN CITY BY AUGMENTED REALITY (EXTENDED)

    OpenAIRE

    M. en C. Martha Rosa Cordero Lopez; M. en C. Marco Antonio Dorantes Gonzalez

    2014-01-01

    Work In Terminal presents the analysis, design, implementation and results of Reconstruction Xicocotitlan Tollan-through augmented reality (Extended), which will release information about the Toltec capital supplemented by presenting an overview of the main premises of the Xicocotitlan Tollan city supported dimensional models based on the augmented reality technique showing the user a virtual representation of buildings in Tollan phase.

  16. Potential Use of Augmented Reality in LIS Education

    Science.gov (United States)

    Wójcik, Magdalena

    2016-01-01

    The subject of this article is the use of augmented reality technology in library and information science education. The aim is to determine the scope and potential uses of augmented reality in the education of information professionals. In order to determine the scope and forms of potential use of AR technology in LIS education a two-step…

  17. ARLearn: Learning activities and interaction in augmented reality

    NARCIS (Netherlands)

    Ternier, Stefaan; Tabuenca, Bernardo; Specht, Marcus

    2013-01-01

    Ternier, S., Tabuenca, B., & Specht, M. (2012). ARLearn: Learning activities and interaction in augmented reality. In M. Specht, J. Multisilta, & M. Sharples (Eds.), Proceedings of the Mobile Augmented Reality for Education Workshop (pp. 10-13). October, 16-17, 2012, Helsinki, Finland.

  18. Prevalence of sinus augmentation associated with maxillary posterior implants.

    Science.gov (United States)

    Seong, Wook-Jin; Barczak, Michael; Jung, Jae; Basu, Saonli; Olin, Paul S; Conrad, Heather J

    2013-12-01

    Pneumatization of the maxillary sinus limits the quantity of alveolar bone available for implant placement and may result in a lack of primary stability and difficulty in achieving osseointegration. The purpose of this study was to retrospectively analyze a group of patients who had implants placed in the posterior maxilla, calculate the prevalence of sinus augmentation, and identify factors related to sinus augmentation. With institutional review board approval, dental records from a population of patients who had implants placed in the maxillary posterior region between January 2000 and December 2004 were used to create a database. Independent variables were classified as continuous (age of the patient at stage 1 implant surgery [S1], time between extraction and S1, time between extraction and sinus augmentation, and time between sinus augmentation and S1) and categorical (gender, implant failure, American Society of Anesthesiologists system classification, smoking, osteoporosis, residual crestal bone height, implant position, implant proximity, prostheses type, and implant diameter and length). The dependent variable was the incidence of a sinus augmentation procedure. Simple logistic regression was used to assess the influence of each factor on the presence of sinus augmentation (P rate of 93.2% over a mean follow-up period of 35.7 months. Of 502 implants, 272 (54.2%) were associated with a sinus augmentation procedure. Among variables, residual crestal bone height (P edentulism. Sinus augmentation was significantly associated with implant failure and wide implants. PMID:21651386

  19. TOLLAN-XICOCOTITLAN: A RECONSTRUCTED CITY BY AUGMENTED REALITY (EXTENDED

    Directory of Open Access Journals (Sweden)

    M. en C. Martha Rosa Cordero López

    2014-10-01

    Full Text Available Work In Terminal presents the analysis, design, implementation and results of Reconstruction Xicocotitlan Tollan-through augmented reality (Extended, which will release information about the Toltec capital supplemented by presenting an overview of the main premises of the Xicocotitlan Tollan city supported dimensional models based on the augmented reality technique showing the user a virtual representation of buildings in Tollan phase.

  20. RECONSTRUCTION OF TOLLANXICOCOTITLAN CITY BY AUGMENTED REALITY (EXTENDED

    Directory of Open Access Journals (Sweden)

    M. en C. Martha Rosa Cordero Lopez

    2014-05-01

    Full Text Available Work In Terminal presents the analysis, design, implementation and results of Reconstruction Xicocotitlan Tollan-through augmented reality (Extended, which will release information about the Toltec capital supplemented by presenting an overview of the main premises of the Xicocotitlan Tollan city supported dimensional models based on the augmented reality technique showing the user a virtual representation of buildings in Tollan phase.

  1. Hoe maak je gebruik van augmented reality in het onderwijs

    OpenAIRE

    Ternier, Stefaan; Kester, Liesbeth; Schmitz, Birgit; Kluijfhout, Eric; Wolff, Charlotte; Maassen, Marcel; Gijselaers, Jérôme; Berkhout, Jeroen; Storm, Jeroen; Roks, Sabine

    2013-01-01

    Ternier, S., Kester, L., Wolff, C., Maasen, M., Gijselaers, J., Berkhout, J., & Storm, J. (2012, 16 November). Hoe maak je gebruik van augmented reality in het onderwijs. Masterclass in de OpenU community Open Universiteit, Heerlen, Nederland. Beschikbaar op http://portal.ou.nl/web/augmented-reality-in-het-onderwijs/

  2. Hoe maak je gebruik van augmented reality in het onderwijs

    NARCIS (Netherlands)

    Ternier, Stefaan; Kester, Liesbeth; Schmitz, Birgit; Kluijfhout, Eric; Wolff, Charlotte; Maassen, Marcel; Gijselaers, Jérôme; Berkhout, Jeroen; Storm, Jeroen; Roks, Sabine

    2013-01-01

    Ternier, S., Kester, L., Wolff, C., Maasen, M., Gijselaers, J., Berkhout, J., & Storm, J. (2012, 16 November). Hoe maak je gebruik van augmented reality in het onderwijs. Masterclass in de OpenU community Open Universiteit, Heerlen, Nederland. Beschikbaar op http://portal.ou.nl/web/augmented-realit

  3. Developing Skin Analogues for a Robotic Octopus

    Institute of Scientific and Technical Information of China (English)

    Jinping Hou; Richard H.C.Bonser; George Jeronimidis

    2012-01-01

    In order to fabricate a biomimetic skin for an octopus inspired robot,a new process was developed based on mechanical properties measured from real octopus skin.Various knitted nylon textiles were tested and the one of 10-denier nylon was chosen as reinforcement.A combination of Ecoflex 0030 and 0010 silicone rubbers was used as matrix of the composite to obtain the right stiffness for the skin-analogue system.The open mould fabrication process developed allows air bubble to escape easily and the artificial skin produced was thin and waterproof.Material properties of the biomimetic skin were characterised using static tensile and instrumented scissors cutting tests.The Young's moduli of the artificial skin are 0.08 MPa and 0.13 MPa in the longitudinal and transverse directions,which are much lower than those of the octopus skin.The strength and fracture toughness of the artificial skin,on the other hand are higher than those of real octopus skins.Conically-shaped skin prototypes to be used to cover the robotic arm unit were manufactured and tested.The biomimetic skin prototype was stiff enough to maintain it conical shape when filled with water.The driving force for elongation was reduced significantly compared with previous prototypes.

  4. Alligator Rivers Analogue project. Groundwater Chemistry

    International Nuclear Information System (INIS)

    The objective of this volume is to provide an account of the groundwater sampling and analysis program undertaken at Koongarra, as part of the Alligator Rivers Analogue Project. Chemical parameters were investigated in groundwaters at various locations and depths in the vicinity of the Koongarra orebody. Measurements of the pH, redox state, conductivity, and bicarbonate alkalinity provided a starting point for interpreting water chemistry. Groundwater samples were obtained using submersible pumps, or, in a few cases, bailers. The concentrations of major cations and anions, such as magnesium and phosphate, were determined using a variety of standard techniques. Numerous elements were routinely analysed using quantitative or semi-quantitative ICPMS. Uranium series radionuclides and environmental isotopes were measured using radiochemical techniques and mass spectrometry. The distributions of isotopes such as deuterium, tritium, 210Pb, 13C and 14C enabled groundwater mixing and flow-paths to be studied. The occurrence and distributions of major species at Koongarra are presented in this volume, using both cross-sections and contour plans. Chemical and isotopic data for groundwater analyses carried out during the project are included in the Appendices. 47 refs., 16 tabs., 58 figs

  5. Insulin, insulin analogues and diabetic retinopathy.

    Science.gov (United States)

    Chantelau, Ernst; Kimmerle, Renate; Meyer-Schwickerath, Rolf

    2008-02-01

    Insulin is absolutely vital for living beings. It is not only involved in metabolism, but also in the regulation of growth factors, e.g. IGF-1. In this review we address the role insulin has in the natural evolution of diabetic retinopathy. On the one hand, chronic deficiency of insulin and IGF-1 at the retina is thought to cause capillary degeneration, with subsequent ischaemia. On the other hand, acute abundance of (exogenously administered) insulin and IGF-1 enhances ischaemia-induced VEGF expression. A critical ratio of tissue VEGF-susceptibility: VEGF-availability triggers vascular proliferation (i.e. of micro-aneurysms and/or abnormal vessels). The patent-protected insulin analogues Lispro, Glulisine, Aspart, Glargine and Detemir are artificial insulin derivatives with altered biological responses compared to natural insulin (e.g. divergent insulin and /or IGF-1 receptor-binding characteristics, signalling patterns, and mitogenicity). Their safety profiles concerning diabetic retinopathy remain to be established by randomised controlled trials. Anecdotal reports and circumstantial evidence suggest that Lispro and Glargine might worsen diabetic retinopathy.

  6. Progress in the Alligator Rivers analogue project

    International Nuclear Information System (INIS)

    The OECD Nuclear Energy Agency (NEA) Steering Committee agreed on 1 October 1987 to sponsor the International Alligator Rivers Analogue Project (ARAP) for a three year program with a formal starting date of 1 September 1987. The participants are six organisations from five NEA Member States with ANSTO as the managing participant. A detailed tehnical program was agreed by a Joint Technical Committee and this comprises six main technical sub-projects: modelling of radionuclide migration, hydrogeology at Koongarra, uranium/thorium series disequilibria studies, colloid and groundwater studies, fission product studies and transuranic nuclide studies. A modelling workshop for participants and contractors was held in Sydney in February 1988 and a field visit was undertaken in May 1988. Laboratory studies on samples obtained in previous field visits were carried out from September 1987. Data from the project are being provided for participants as case 8 in the INTRAVAL model validation project coordinated by the Swedish Nuclear Power Inspectorate. A Joint Technical Committee meeting to approve the technical program and budjet for the second year will be held in Sydney in July 1988

  7. Augmented Reality as a Countermeasure for Sleep Deprivation.

    Science.gov (United States)

    Baumeister, James; Dorrlan, Jillian; Banks, Siobhan; Chatburn, Alex; Smith, Ross T; Carskadon, Mary A; Lushington, Kurt; Thomas, Bruce H

    2016-04-01

    Sleep deprivation is known to have serious deleterious effects on executive functioning and job performance. Augmented reality has an ability to place pertinent information at the fore, guiding visual focus and reducing instructional complexity. This paper presents a study to explore how spatial augmented reality instructions impact procedural task performance on sleep deprived users. The user study was conducted to examine performance on a procedural task at six time points over the course of a night of total sleep deprivation. Tasks were provided either by spatial augmented reality-based projections or on an adjacent monitor. The results indicate that participant errors significantly increased with the monitor condition when sleep deprived. The augmented reality condition exhibited a positive influence with participant errors and completion time having no significant increase when sleep deprived. The results of our study show that spatial augmented reality is an effective sleep deprivation countermeasure under laboratory conditions. PMID:26780802

  8. PARAMETERS OF AUGMENTED REALITY AND ITS USE IN EDUCATION

    Directory of Open Access Journals (Sweden)

    JEŘÁBEK, Tomáš

    2013-12-01

    Full Text Available This article examines the issue of augmented reality and possibilities of its application in education. It briefly reports on selected results of a broader survey focused on technological, psychological, physiological and didactical aspects of the issue. It presumes that augmented reality has its unique place in technical teaching tools since it is a technological-perception concept, which in certain didactical situations creates more suitable perceptual environment than real environment itself on one hand, or virtual environment on the other. It focuses on identification of the technological-functional properties and specifics of augmented reality systems and on verification of model examples of augmented reality applications in school practice. It characterizes the course and results of empirical research project based on a descriptive case study exploring the cases of implementing selected application solutions of augmented reality into learning experience in accordance with the model of pro-active action research.

  9. Augmented Reality as a Countermeasure for Sleep Deprivation.

    Science.gov (United States)

    Baumeister, James; Dorrlan, Jillian; Banks, Siobhan; Chatburn, Alex; Smith, Ross T; Carskadon, Mary A; Lushington, Kurt; Thomas, Bruce H

    2016-04-01

    Sleep deprivation is known to have serious deleterious effects on executive functioning and job performance. Augmented reality has an ability to place pertinent information at the fore, guiding visual focus and reducing instructional complexity. This paper presents a study to explore how spatial augmented reality instructions impact procedural task performance on sleep deprived users. The user study was conducted to examine performance on a procedural task at six time points over the course of a night of total sleep deprivation. Tasks were provided either by spatial augmented reality-based projections or on an adjacent monitor. The results indicate that participant errors significantly increased with the monitor condition when sleep deprived. The augmented reality condition exhibited a positive influence with participant errors and completion time having no significant increase when sleep deprived. The results of our study show that spatial augmented reality is an effective sleep deprivation countermeasure under laboratory conditions.

  10. Computational modelling of bone augmentation in the spine

    Directory of Open Access Journals (Sweden)

    Sandro D. Badilatti

    2015-10-01

    Full Text Available Computational models are gaining importance not only for basic science, but also for the analysis of clinical interventions and to support clinicians prior to intervention. Vertebroplasty has been used to stabilise compression fractures in the spine for years, yet there are still diverging ideas on the ideal deposition location, volume, and augmentation material. In particular, little is known about the long-term effects of the intervention on the surrounding biological tissue. This review aims to investigate computational efforts made in the field of vertebroplasty, from the augmentation procedure to strength prediction and long-term in silico bone biology in augmented human vertebrae. While there is ample work on simulating the augmentation procedure and strength prediction, simulations predicting long-term effects are lacking. Recent developments in bone remodelling simulations have the potential to show adaptation to cement augmentation and, thus, close this gap.

  11. Doing it with Mirrors Classical analogues for Black Hole radiation

    CERN Document Server

    Srinivasan, K

    1998-01-01

    We construct analogues for the quantum phenomena of black hole radiation in the context of {\\it classical field theory}. Hawking radiation from a (radially) collapsing star is mathematically equivalent to radiation from a mirror moving along a specific trajectory in Minkowski spacetime. We construct a classical analogue for this quantum phenomenon and use it to construct a classical analogue for black hole radiation. The radiation spectrum in quantum field theory has the power spectrum as its classical analogue. Monochromatic light is continually reflected off a moving mirror or the silvered surface of a collapsing star.The reflected light is fourier analysed by the observer and the power spectrum is constructed. For a mirror moving along the standard black hole trajectory,it is seen that the power spectrum has a ``thermal'' nature. Mirror-observer configurations like an inertial mirror observed in an accelerated observer's frame and an accelerated mirror observed in a Rindler frame are investigated and condi...

  12. From BPA to its analogues: Is it a safe journey?

    Science.gov (United States)

    Usman, Afia; Ahmad, Masood

    2016-09-01

    Bisphenol-A (BPA) is one of the most abundant synthetic chemicals in the world due to its uses in plastics. Its widespread exposure vis-a-vis low dose effects led to a reduction in its safety dose and imposition of ban on its use in infant feeding bottles. This restriction paved the way for the gradual market entry of its analogues. However, their structural similarity to BPA has put them under surveillance for endocrine disrupting potential. The application of these analogues is increasing and so are the studies reporting their toxicity. This review highlights the reasons which led to the ban of BPA and also reports the exposure and toxicological data available on its analogues. Hence, this compilation is expected to answer in a better way whether the replacement of BPA by these analogues is safer or more harmful? PMID:27262103

  13. Generalised insulin oedema after intensification of treatment with insulin analogues

    OpenAIRE

    Adamo, Luigi; Thoelke, Mark

    2013-01-01

    We report a case of generalised insulin oedema after intensification of treatment with genetically modified insulin. This is the first case of generalised oedema in response to treatment with insulin analogues in a patient not insulin naive.

  14. Structural analogues of diosgenyl saponins: synthesis and anticancer activity.

    Science.gov (United States)

    Kaskiw, Matthew J; Tassotto, Mary Lynn; Mok, Mac; Tokar, Stacey L; Pycko, Roxanne; Th'ng, John; Jiang, Zi-Hua

    2009-11-15

    Saponins display various biological activities including anti-tumor activity. Recently intensive research has been focused on developing saponins for tumor therapies. The diosgenyl saponin dioscin is one of the most common steroidal saponins and exhibits potent anticancer activity in several human cancer cells through apoptosis-inducing pathways. In this paper, we describe the synthesis of several diosgenyl saponin analogues containing either a 2-amino-2-deoxy-beta-d-glucopyranosyl residue or an alpha-l-rhamnopyranosyl-(1-->4)-2-amino-2-deoxy-beta-d-glucopyranosyl residue with different acyl substituents on the amino group. The cytotoxic activity of these compounds was evaluated in MCF-7 breast cancer cells and HeLa cervical cancer cells. Structure-activity relationship studies show that the disaccharide saponin analogues are in general less active than their corresponding monosaccharide analogues. The incorporation of an aromatic nitro functionality into these saponin analogues does not exhibit significant effect on their cytotoxic activity. PMID:19819703

  15. Synthesis of Novel Isoxazole-contained Analogues of Losartan

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    A series of novel isoxazole-contained analogues of Losartan were designed and synthesized with 1,3-DC reaction. The regioselectivity of the reaction was discussed and the compounds are potential antihypertensive.

  16. Defining Analytical Strategies for Mars Sample Return with Analogue Missions

    Science.gov (United States)

    Osinski, G. R.; Sapers, H. M.; Francis, R.; Pontefract, A.; Tornabene, L. L.; Haltigin, T.

    2016-05-01

    The characterization of biosignatures in MSR samples will require integrated, cross-platform laboratory analyses carefully correlated and calibrated with Rover-based technologies. Analogue missions provide context for implementation and assessment.

  17. A q-Analogue of the Dirichlet L-Function

    Institute of Scientific and Technical Information of China (English)

    Min-Soo Kim; Jin-Woo Son

    2002-01-01

    In this paper, we will treat some interesting formulae which are slightly different from Kim's results by more or less the same method in [4-9]. At first, we consider a new definition of a q-analogue of Bernoulli numbers and polynomials.We construct a q-analogue of the Riemann ζ-function, Hurwitz ζ-function, and Dirichlet L-series. Also, we investigate the relation between the q-analogue of generalized Bernoulli numbers and the generalized Euler numbers. As an application, we prove that the q-analogue of Bernoulli numbers occurs in the coefficients of some Stirling type series for the p-adic analytic q-log-gamma function.

  18. Current prodrug strategies for improving oral absorption of nucleoside analogues

    Directory of Open Access Journals (Sweden)

    Youxi Zhang

    2014-04-01

    Full Text Available Nucleoside analogues are first line chemotherapy in various severe diseases: AIDS (acquired immunodeficiency disease syndrome, cytomegalovirus infections, cancer, etc. However, many nucleoside analogues exhibit poor oral bioavailability because of their high polarity and low intestinal permeability. In order to get around this drawback, prodrugs have been utilized to improve lipophilicity by chemical modification of the parent drug. Alternatively, prodrugs targeting transporters present in the intestine have been applied to promote the transport of the nucleoside analogues. Valacyclovir and valganciclovir are two classic valine ester prodrugs transported by oligopeptide transporter 1. The ideal prodrug achieves delivery of a parent drug by attaching a non-toxic moiety that is stable during transport, but is readily degraded to the parent drug once at the target. This article presents advances of prodrug approaches for enhancing oral absorption of nucleoside analogues.

  19. Analogue and Mixed-Signal Integrated Circuits for Space Applications

    CERN Document Server

    2014-01-01

    The purpose of AMICSA 2014 (organised in collaboration of ESA and CERN) is to provide an international forum for the presentation and discussion of recent advances in analogue and mixed-signal VLSI design techniques and technologies for space applications.

  20. Analogue gravitational phenomena in Bose-Einstein condensates

    CERN Document Server

    Finazzi, Stefano

    2012-01-01

    Analogue gravity is based on the simple observation that perturbations propagating in several physical systems can be described by a quantum field theory in a curved spacetime. While phenomena like Hawking radiation are hardly detectable in astrophysical black holes, these effects may be experimentally tested in analogue systems. In this Thesis, focusing on Bose-Einstein condensates, we present our recent results about analogue models of gravity from three main perspectives: as laboratory tests of quantum field theory in curved spacetime, for the techniques that they provide to address various issues in general relativity, and as toy models of quantum gravity. The robustness of Hawking-like particle creation is investigated in flows with a single black hole horizon. Furthermore, we find that condensates with two (white and black) horizons develop a dynamical instability known in general relativity as black hole laser effect. Using techniques borrowed from analogue gravity, we also show that warp drives, which...

  1. Solistatinol, a novel phenolic compactin analogue from Penicillium solitum

    DEFF Research Database (Denmark)

    Larsen, Thomas Ostenfeld; Lange, Lene; Schnorr, Kirk;

    2007-01-01

    Solistatinol, a novel phenolic compactin analogue, has been isolated from Penicillium solitum using a UV-guided strategy. The structure and relative stereochemistry were determined by NMR spectroscopy and mass spectrometry. The absolute stereochemistry was determined by chemical degradation...

  2. Long Acting Somatostatin Analogue: Clinical Potential for Gastrointestinal Disease

    OpenAIRE

    Richard N Fedorak

    1989-01-01

    Name somatostatin is found throughout the gastrointestinal tract and has a wide variety of biological actions. Nevertheless, its short biological half-life and limited stability necessitate its use via continuous parenteral infusion and, thus, limits its therapeutic usefulness The development of long acting somatostatin analogues have lead to a re-examination of the therapeutic usefulness of somatostatin in gastrointestinal disease. Somatostatin analogues appear most beneficial tn preventing ...

  3. Synthesis and evaluation of novel carbocyclic carbohydrate analogues

    OpenAIRE

    Adamson, Christopher William

    2016-01-01

    Carbohydrate analogues play an indispensible role in the study of glycan processing enzymes. These compounds have attracted attention as probes of enzyme mechanisms, as chemical tools for the elucidation of enzyme function and as potential pharmaceuticals. The development of organocatalytic aldol chemistry has fundamentally altered the way chemists approach the synthesis of carbohydrate analogues. In this thesis I highlight a novel strategy toward the synthesis of carbocyclic carbohydrate ana...

  4. Analogue Signal Processing: Collected Papers 1996-97

    DEFF Research Database (Denmark)

    1997-01-01

    This document is a collection of the papers presented at international conferences and in international journals by the analogue signal processing group of the Department of Information Technology, Technical University of Denmark, in 1996 and 1997.......This document is a collection of the papers presented at international conferences and in international journals by the analogue signal processing group of the Department of Information Technology, Technical University of Denmark, in 1996 and 1997....

  5. Analogue Signal Processing: Collected Papers 1994-95

    DEFF Research Database (Denmark)

    1996-01-01

    This document is a collection of the papers presented at international conferences and in international journals by the analogue signal processing group of Electronics Institute, Technical University of Denmark, in 1994 and 1995.......This document is a collection of the papers presented at international conferences and in international journals by the analogue signal processing group of Electronics Institute, Technical University of Denmark, in 1994 and 1995....

  6. Augmented robotic device for EVA hand manoeuvres

    Science.gov (United States)

    Matheson, Eloise; Brooker, Graham

    2012-12-01

    During extravehicular activities (EVAs), pressurised space suits can lead to difficulties in performing hand manoeuvres and fatigue. This is often the cause of EVAs being terminated early, or taking longer to complete. Assistive robotic gloves can be used to augment the natural motion of a human hand, meaning work can be carried out more efficiently with less stress to the astronaut. Lightweight and low profile solutions must be found in order for the assistive robotic glove to be easily integrated with a space suit pressure garment. Pneumatic muscle actuators combined with force sensors are one such solution. These actuators are extremely light, yet can output high forces using pressurised gases as the actuation drive. Their movement is omnidirectional, so when combined with a flexible exoskeleton that itself provides a degree of freedom of movement, individual fingers can be controlled during flexion and extension. This setup allows actuators and other hardware to be stored remotely on the user's body, resulting in the least possible mass being supported by the hand. Two prototype gloves have been developed at the University of Sydney; prototype I using a fibreglass exoskeleton to provide flexion force, and prototype II using torsion springs to achieve the same result. The gloves have been designed to increase the ease of human movements, rather than to add unnatural ability to the hand. A state space control algorithm has been developed to ensure that human initiated movements are recognised, and calibration methods have been implemented to accommodate the different characteristics of each wearer's hands. For this calibration technique, it was necessary to take into account the natural tremors of the human hand which may have otherwise initiated unexpected control signals. Prototype I was able to actuate the user's hand in 1 degree of freedom (DOF) from full flexion to partial extension, and prototype II actuated a user's finger in 2 DOF with forces achieved

  7. Ionospheric Challenges for GNSS Based Augmentation Systems

    Science.gov (United States)

    Doherty, P.; Valladares, C. E.

    2007-12-01

    The ionosphere is a highly dynamic physical phenomenon that presents a variable source of error for Global Navigation Satellite System (GNSS) signals and GNSS based operational systems. The Federal Aviation Administration's (FAA) Wide-Area Augmentation System (WAAS) was designed to enhance the GNSS standard positioning service by providing additional accuracy, availability and integrity that is sufficient for use in commercial aviation. It is the first of a number of planned regional Satellite Based Augmentation Systems (SBAS). Other systems in development include the European EGNOS system, the MSAS system in Japan and the GAGAN system in India. In addition, the South American countries are investigating the feasibility of operating an SBAS system in this region. Much of the WAAS ionospheric research and development focused on defining and mitigating ionospheric challenges characteristic of the mid-latitude regions, where the ionosphere is well studied and relatively quiescent. The EGNOS and MSAS systems will primarily operate under a similarly quiescent mid-latitude ionosphere. SBAS system development in South America, India and other low-latitude regions, however, will have to contend with much more extreme conditions. These conditions include strong spatial and temporal gradients, plasma depletions and scintillation. All of these conditions have a potential to limit SBAS performance in the low latitude regions. This presentation will review the effects that the ionosphere has on the mid-latitude WAAS system. It will present the techniques that are used to mitigate ionospheric disturbances induced on the system during severe geomagnetic activity and it will quantify the effect that this activity has on system performance. The presentation will then present data from the South American Low-latitude Ionospheric Sensor Network (LISN) that can be used to infer the ionospheric effects on SBAS performance in the most challenging low-latitude ionospheric environment

  8. Analogue gravitational phenomena in Bose-Einstein condensates

    Science.gov (United States)

    Finazzi, Stefano

    2012-08-01

    Analogue gravity is based on the simple observation that perturbations propagating in several physical systems can be described by a quantum field theory in a curved spacetime. While phenomena like Hawking radiation are hardly detectable in astrophysical black holes, these effects may be experimentally tested in analogue systems. In this Thesis, focusing on Bose-Einstein condensates, we present our recent results about analogue models of gravity from three main perspectives: as laboratory tests of quantum field theory in curved spacetime, for the techniques that they provide to address various issues in general relativity, and as toy models of quantum gravity. The robustness of Hawking-like particle creation is investigated in flows with a single black hole horizon. Furthermore, we find that condensates with two (white and black) horizons develop a dynamical instability known in general relativity as black hole laser effect. Using techniques borrowed from analogue gravity, we also show that warp drives, which are general relativistic spacetimes allowing faster-than-light travel, are unstable. Finally, the cosmological constant issue is investigated from an analogue gravity perspective and relativistic Bose-Einstein condensates are proposed as new analogue systems with novel interesting properties.

  9. Specific microtubule-depolymerizing agents augment efficacy of dendritic cell-based cancer vaccines

    Directory of Open Access Journals (Sweden)

    Chang Wei-Ting

    2011-06-01

    Full Text Available Abstract Background Damage-associated molecular patterns (DAMPs are associated with immunogenic cell death and have the ability to enhance maturation and antigen presentation of dendritic cells (DCs. Specific microtubule-depolymerizing agents (MDAs such as colchicine have been shown to confer anti-cancer activity and also trigger activation of DCs. Methods In this study, we evaluated the ability of three MDAs (colchicine and two 2-phenyl-4-quinolone analogues to induce immunogenic cell death in test tumor cells, activate DCs, and augment T-cell proliferation activity. These MDAs were further evaluated for use as an adjuvant in a tumor cell lysate-pulsed DC vaccine. Results The three test phytochemicals considerably increased the expression of DAMPs including HSP70, HSP90 and HMGB1, but had no effect on expression of calreticulin (CRT. DC vaccines pulsed with MDA-treated tumor cell lysates had a significant effect on tumor growth, showed cytotoxic T-lymphocyte activity against tumors, and increased the survival rate of test mice. In vivo antibody depletion experiments suggested that CD8+ and NK cells, but not CD4+ cells, were the main effector cells responsible for the observed anti-tumor activity. In addition, culture of DCs with GM-CSF and IL-4 during the pulsing and stimulation period significantly increased the production of IL-12 and decreased production of IL-10. MDAs also induced phenotypic maturation of DCs and augmented CD4+ and CD8+ T-cell proliferation when co-cultured with DCs. Conclusions Specific MDAs including the clinical drug, colchicine, can induce immunogenic cell death in tumor cells, and DCs pulsed with MDA-treated tumor cell lysates (TCLs can generate potent anti-tumor immunity in mice. This approach may warrant future clinical evaluation as a cancer vaccine.

  10. The Greenland Analogue Project, Yearly Report 2009

    International Nuclear Information System (INIS)

    To advance the understanding of processes associated with glaciation and their impact on the long-term performance of a deep geological repository, the Greenland Analogue Project (GAP), a four-year field and modelling study of the Greenland ice sheet and sub-surface conditions, has been initiated collaboratively by SKB, Posiva and NWMO. The study site encompasses a land terminus portion of the Greenland ice sheet east of Kangerlussuaq and is in many ways considered to be an appropriate analogue of the conditions that are expected to prevail in much of Canada and Fennoscandia during future glacial cycles. The project is planned to run from 2009 until 2012. The GAP will conduct the first in situ investigations of some of the parameters and processes needed to achieve a realistic understanding of how an ice sheet may impact a deep repository, and will provide measurements, observations and data that may significantly improve our safety assessments and risk analyses of glaciation scenarios. The project includes three sub-projects (A-C) with specific individual objectives, which collectively aim at contributing knowledge and input to the overall project aim. Three field campaigns were carried out in SPA during 2009. These campaigns focused on: (1) deployment and maintenance of AWS and GPS stations and to test the deep-look radar equipment; (2) investigating the hydrological processes and feedbacks and testing of passive seismic equipment; (3) downloading of weather station data and GPS data and winterizing the equipment. An extensive archive of real-time satellite remote sensing datasets has been obtained to be able to better constraint the surface elevation and dynamics of basal hydrological mechanisms. From this archive it has been possible to obtain Russell Glacier Cachment (RGC)-wide constraints on annual, seasonal and specific temporal snapshots of surface speed, initial lake and moulin distribution, drainage and network connections along with the temporal

  11. Hydrophobic surfactant proteins and their analogues.

    Science.gov (United States)

    Walther, Frans J; Waring, Alan J; Sherman, Mark A; Zasadzinski, Joseph A; Gordon, Larry M

    2007-01-01

    Lung surfactant is a complex mixture of phospholipids and four surfactant-associated proteins (SP-A, SP-B, SP-C and SP-D). Its major function in the lung alveolus is to reduce surface tension at the air-water interface in the terminal airways by the formation of a surface-active film enriched in surfactant lipids, hence preventing cellular collapse during respiration. Surfactant therapy using bovine or porcine lung surfactant extracts, which contain only polar lipids and native SP-B and SP-C, has dramatically improved the therapeutic outcomes of preterm infants with respiratory distress syndrome (RDS). One important goal of surfactant researchers is to replace animal-derived therapies with fully synthetic preparations based on SP-B and SP-C, produced by recombinant technology or peptide synthesis, and reconstituted with selected synthetic lipids. Here, we review recent research developments with peptide analogues of SP-B and SP-C, designed using either the known primary sequence and three-dimensional (3D) structure of the native proteins or, alternatively, the known 3D structures of closely homologous proteins. Such SP-B and SP-C mimics offer the possibility of studying the mechanisms of action of the respective native proteins, and may allow the design of optimized surfactant formulations for specific pulmonary diseases (e.g., acute lung injury (ALI) or acute respiratory distress syndrome (ARDS)). These synthetic surfactant preparations may also be a cost-saving therapeutic approach, with better quality control than may be obtained with animal-based treatments. PMID:17575474

  12. Habitability & Astrobiology Research in Mars Terrestrial Analogues

    Science.gov (United States)

    Foing, Bernard

    2014-05-01

    We performed a series of field research campaigns (ILEWG EuroMoonMars) in the extreme Utah desert relevant to Mars environments, and in order to help in the interpretation of Mars missions measurements from orbit (MEX, MRO) or from the surface (MER, MSL), or Moon geochemistry (SMART-1, LRO). We shall give an update on the sample analysis in the context of habitability and astrobiology. Methods & Results: In the frame of ILEWG EuroMoonMars campaigns (2009 to 2013) we deployed at Mars Desert Research station, near Hanksville Utah, a suite of instruments and techniques [A, 1, 2, 9-11] including sample collection, context imaging from remote to local and microscale, drilling, spectrometers and life sensors. We analyzed how geological and geochemical evolution affected local parameters (mineralogy, organics content, environment variations) and the habitability and signature of organics and biota. Among the important findings are the diversity in the composition of soil samples even when collected in close proximity, the low abundances of detectable PAHs and amino acids and the presence of biota of all three domains of life with significant heterogeneity. An extraordinary variety of putative extremophiles was observed [3,4,9]. A dominant factor seems to be soil porosity and lower clay-sized particle content [6-8]. A protocol was developed for sterile sampling, contamination issues, and the diagnostics of biodiversity via PCR and DGGE analysis in soils and rocks samples [10, 11]. We compare the 2009 campaign results [1-9] to new measurements from 2010-2013 campaigns [10-12] relevant to: comparison between remote sensing and in-situ measurements; the study of minerals; the detection of organics and signs of life. Keywords: field analogue research, astrobiology, habitability, life detection, Earth-Moon-Mars, organics References [A] Foing, Stoker & Ehrenfreund (Editors, 2011) "Astrobiology field Research in Moon/Mars Analogue Environments", Special Issue of International

  13. Chemotactic peptide analogues. Synthesis and chemotactic activity of N-formyl-Met-Leu-Phe analogues containing (S)-phenylalaninol derivatives.

    Science.gov (United States)

    Zecchini, G P; Paradisi, M P; Torrini, I; Spisani, S

    1995-09-01

    The synthesis and the biological activity towards human neutrophils of some N-formyl-Met-Leu-Phe-OMe analogues containing (S)-phenylalaninol (Pheol) or its derivatives in place of the native phenylalanine are reported. While the analogue containing Pheol (4) was found to be devoid of significant biological activity, its esters 3 and 5, although inactive as chemoattractants, are able to strongly stimulate superoxide production and are active with a lower efficacy in the lysozyme release. PMID:7487425

  14. Augmented mixed models for clustered proportion data.

    Science.gov (United States)

    Bandyopadhyay, Dipankar; Galvis, Diana M; Lachos, Victor H

    2014-12-01

    Often in biomedical research, we deal with continuous (clustered) proportion responses ranging between zero and one quantifying the disease status of the cluster units. Interestingly, the study population might also consist of relatively disease-free as well as highly diseased subjects, contributing to proportion values in the interval [0, 1]. Regression on a variety of parametric densities with support lying in (0, 1), such as beta regression, can assess important covariate effects. However, they are deemed inappropriate due to the presence of zeros and/or ones. To evade this, we introduce a class of general proportion density, and further augment the probabilities of zero and one to this general proportion density, controlling for the clustering. Our approach is Bayesian and presents a computationally convenient framework amenable to available freeware. Bayesian case-deletion influence diagnostics based on q-divergence measures are automatic from the Markov chain Monte Carlo output. The methodology is illustrated using both simulation studies and application to a real dataset from a clinical periodontology study.

  15. Opportunistic tangible user interfaces for augmented reality.

    Science.gov (United States)

    Henderson, Steven; Feiner, Steven

    2010-01-01

    Opportunistic Controls are a class of user interaction techniques that we have developed for augmented reality (AR) applications to support gesturing on, and receiving feedback from, otherwise unused affordances already present in the domain environment. By leveraging characteristics of these affordances to provide passive haptics that ease gesture input, Opportunistic Controls simplify gesture recognition, and provide tangible feedback to the user. In this approach, 3D widgets are tightly coupled with affordances to provide visual feedback and hints about the functionality of the control. For example, a set of buttons can be mapped to existing tactile features on domain objects. We describe examples of Opportunistic Controls that we have designed and implemented using optical marker tracking, combined with appearance-based gesture recognition. We present the results of two user studies. In the first, participants performed a simulated maintenance inspection of an aircraft engine using a set of virtual buttons implemented both as Opportunistic Controls and using simpler passive haptics. Opportunistic Controls allowed participants to complete their tasks significantly faster and were preferred over the baseline technique. In the second, participants proposed and demonstrated user interfaces incorporating Opportunistic Controls for two domains, allowing us to gain additional insights into how user interfaces featuring Opportunistic Controls might be designed. PMID:19910657

  16. Relaxed core projector-augmented-wave method

    Science.gov (United States)

    Marsman, M.; Kresse, G.

    2006-09-01

    We extend the full-potential projector-augmented-wave method beyond the frozen core approximation, i.e., include the self-consistent optimization of the core charge density, in such a manner that the valence wave functions remain orthogonal to the core. The method consists of an on-the-fly repseudization of the all-electron problem, solving for the self-consistent core charge density within a spherical approximation. The key ideas in our procedure are to keep the projector functions fixed throughout the electronic minimization and to derive the new pseudopartial waves from these original projector functions, at each step of the electronic minimization procedure. Results of relaxed core calculations for atomic interconfigurational energies, structural energy differences between bulk phases of Fe, atomization energies of a subset of Pople's G2-1 set, and the Rh 3d surface core level shifts for the (√3 ×√3 )-Rh(111) surface at 1/3 CO coverage are presented.

  17. Diffuser augmented wind turbine analysis code

    Science.gov (United States)

    Carroll, Jonathan

    Wind Energy is becoming a significant source of energy throughout the world. This ever increasing field will potentially reach the limit of availability and practicality with the wind farm sites and size of the turbine itself. Therefore, it is necessary to develop innovative wind capturing devices that can produce energy in the locations where large conventional horizontal axis wind turbines (HAWTs) are too impractical to install and operate. A diffuser augmented wind turbine (DAWT) is one such innovation. DAWTs increase the power output of the rotor by increasing the wind speed into the rotor using a duct. Currently, developing these turbines is an involved process using time consuming Computational Fluid Dynamics codes. A simple and quick design tool is necessary for designers to develop efficient energy capturing devices. This work lays out the theory for a quick analysis tool for DAWTs using an axisymmetric surface vorticity method. This method allows for quick analysis of duct, hubs and rotors giving designers a general idea of the power output of the proposed hub, blade and duct geometry. The method would be similar to the way blade element momentum theory is used to design conventional HAWTs. It is determined that the presented method is viable for preliminary design of DAWTs.

  18. Spacecraft 3D Augmented Reality Mobile App

    Science.gov (United States)

    Hussey, Kevin J.; Doronila, Paul R.; Kumanchik, Brian E.; Chan, Evan G.; Ellison, Douglas J.; Boeck, Andrea; Moore, Justin M.

    2013-01-01

    The Spacecraft 3D application allows users to learn about and interact with iconic NASA missions in a new and immersive way using common mobile devices. Using Augmented Reality (AR) techniques to project 3D renditions of the mission spacecraft into real-world surroundings, users can interact with and learn about Curiosity, GRAIL, Cassini, and Voyager. Additional updates on future missions, animations, and information will be ongoing. Using a printed AR Target and camera on a mobile device, users can get up close with these robotic explorers, see how some move, and learn about these engineering feats, which are used to expand knowledge and understanding about space. The software receives input from the mobile device's camera to recognize the presence of an AR marker in the camera's field of view. It then displays a 3D rendition of the selected spacecraft in the user's physical surroundings, on the mobile device's screen, while it tracks the device's movement in relation to the physical position of the spacecraft's 3D image on the AR marker.

  19. HUNT: Scavenger Hunt with Augmented Reality

    Directory of Open Access Journals (Sweden)

    Yan Lu

    2015-04-01

    Full Text Available This project shows a creative approach to the familiar scavenger hunt game. It involved the implementation of an iPhone application, HUNT, with Augmented Reality (AR capability for the users to play the game as well as an administrative website that game organizers can use to create and make available games for users to play. Using the HUNT mobile app, users will first make a selection from a list of games, and they will then be shown a list of objects that they must seek. Once the user finds a correct object and scans it with the built-in camera on the smartphone, the application will attempt to verify if it is the correct object and then display associated multi-media AR content that may include images and videos overlaid on top of real world views. HUNT not only provides entertaining activities within an environment that players can explore, but the AR contents can serve as an educational tool. The project is designed to increase user involvement by using a familiar and enjoyable game as a basis and adding an educational dimension by incorporating AR technology and engaging and interactive multimedia to provide users with facts about the objects that they have located

  20. RAID: a relation-augmented image descriptor

    KAUST Repository

    Guerrero, Paul

    2016-07-11

    As humans, we regularly interpret scenes based on how objects are related, rather than based on the objects themselves. For example, we see a person riding an object X or a plank bridging two objects. Current methods provide limited support to search for content based on such relations. We present RAID, a relation-augmented image descriptor that supports queries based on inter-region relations. The key idea of our descriptor is to encode region-to-region relations as the spatial distribution of point-to-region relationships between two image regions. RAID allows sketch-based retrieval and requires minimal training data, thus making it suited even for querying uncommon relations. We evaluate the proposed descriptor by querying into large image databases and successfully extract nontrivial images demonstrating complex inter-region relations, which are easily missed or erroneously classified by existing methods. We assess the robustness of RAID on multiple datasets even when the region segmentation is computed automatically or very noisy.

  1. Augmenting Transition Probabilities for Neutral Atomic Nitrogen

    Science.gov (United States)

    Terrazas-Salines, Imelda; Park, Chul; Strawa, Anthony W.; Hartman, G. Joseph (Technical Monitor)

    1996-01-01

    The transition probability values for a number of neutral atomic nitrogen (NI) lines in the visible wavelength range are determined in order to augment those given in the National Bureau of Standards Tables. These values are determined from experimentation as well as by using the published results of other investigators. The experimental determination of the lines in the 410 to 430 nm range was made from the observation of the emission from the arc column of an arc-heated wind tunnel. The transition probability values of these NI lines are determined to an accuracy of +/- 30% by comparison of their measured intensities with those of the atomic oxygen (OI) multiplet at around 615 nm. The temperature of the emitting medium is determined both using a multiple-layer model, based on a theoretical model of the flow in the arc column, and an empirical single-layer model. The results show that the two models lead to the same values of transition probabilities for the NI lines.

  2. Augmented Fish Monitoring, 1988 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Michak, Patty

    1989-05-01

    Since 1986 Washington department of Fisheries (WDF) has participated in the Columbia Basin Augmented Fish Health Monitoring Project. This project provides a standardized level of fish health information from all Agencies rearing fish in the Columbia Basin. WDF has actively participated in this project, and completed its second year of fish health monitoring, data collection and pathogen inspection during 1988. This report will present data collected from January 1, 1988 to December 31, 1988 and will compare sampling results from 1987 and 1988. The analysis will be divided in two sections: adult analysis and juvenile analysis. The adult analysis will include results from screening at spawning for viral pathogens and bacterial kidney disease (BKD), and evaluation of causes of pre-spawning loss. The juvenile analysis will include pre-release examination results, mid-term rearing exam results and evaluation of the Organosomatic Analysis completed on index stocks. Additionally, highlights from monthly monitoring exams will identify any significant and unusual findings from the routine exams completed in 1988. 6 refs., 8 figs., 14 tabs.

  3. Augmented Fish Health Monitoring, 1988 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Warren, James W.

    1989-08-15

    Augmented Fish Health Monitoring Contract AI79-87BP35585 was implemented on July 20, 1987. Second year activities focused on full implementation of disease surveillance activities and histopathological support services to participating state agencies. Persistent and sometimes severe disease losses were caused by infectious hematopoietic necrosis (IHN) in summer steelhead trout in Idaho and in spring chinook salmon at hatcheries on the lower Columbia River. Diagnostic capability was enhanced by the installation, for field use, of enzyme-linked immunosorbent assay (ELISA) technology at the Dworshak Fish Health Center for the detection and assay of bacterial kidney disease and by a dot-blot'' training session for virus identification at the Lower Columbia Fish Health Center. Complete diagnostic and inspection services were provided to 13 Columbia River basin National Fish hatcheries. Case history data was fully documented in a computerized data base for storage and analysis. This report briefly describes work being done to meet contract requirements for fish disease surveillance at Service facilities in the Columbia River basin. It also summarizes the health status of fish reared at those hatcheries and provides a summary of case history data for calendar year 1988. 2 refs., 4 tabs.

  4. Augmented Fish Health Monitoring, 1990 Annual Report.

    Energy Technology Data Exchange (ETDEWEB)

    Warren, James W.

    1990-08-15

    Augmented Fish Health Monitoring Contract AI79-87BP35585 was implemented on July 20, 1987. This report briefly describes third-year work being done to meet contract requirements for fish disease surveillance at Service facilities in the Columbia River basin and for histopathological support services provided to participating state agencies. It also summarizes the health status of fish reared at participating Service hatcheries and provides a summary of case history data for calendar year 1989. Items of note included severe disease losses to infectious hematopoietic necrosis (IHN) in summer steelhead trout in Idaho, the detection of IHN virus in juvenile spring chinook salmon at hatcheries on the lower Columbia River, and improved bacterial kidney disease (BKD) detection and adult assay by enzyme-linked immunosorbent assay (ELISA) technology at the Dworshak Fish Health Center. Complete diagnostic and inspection services were provided to 13 Columbia River Basin National Fish Hatcheries. Case history data was fully documented in a computerized data base for storage and analysis and is summarized herein. 2 refs., 1 fig., 4 tabs.

  5. Augmenting painted architectures for communicating cultural heritage

    Directory of Open Access Journals (Sweden)

    Alberto Sdegno

    2015-07-01

    Full Text Available The paper presents a research under development at the University of Trieste to analyze a painted architecture by Paolo Veronese and to present the results using AR systems (Augmented Reality Systems. The canvas was painted in 1573 and it is now at the Gallerie dell’Accademia Museum in Venice. The aim of the research was to transform a two-dimensional work of art in a three dimensional one, allowing all the visitors of a museum to enter the space of the representation and perceive it in a more direct way. After the geometrical analysis of the picture, we started the digital restitution of the perspective references and proceed to model the virtual scene using Boolean primitives and applying all the textures to render the scene in a very realistic way. The further step was to convert the model into a dynamic form with AR algorithms and associate it with spatial references to allow users to do a virtual experience of it.

  6. Augmentation of tendon-to-bone healing.

    Science.gov (United States)

    Atesok, Kivanc; Fu, Freddie H; Wolf, Megan R; Ochi, Mitsuo; Jazrawi, Laith M; Doral, M Nedim; Lubowitz, James H; Rodeo, Scott A

    2014-03-19

    Tendon-to-bone healing is vital to the ultimate success of the various surgical procedures performed to repair injured tendons. Achieving tendon-to-bone healing that is functionally and biologically similar to native anatomy can be challenging because of the limited regeneration capacity of the tendon-bone interface. Orthopaedic basic-science research strategies aiming to augment tendon-to-bone healing include the use of osteoinductive growth factors, platelet-rich plasma, gene therapy, enveloping the grafts with periosteum, osteoconductive materials, cell-based therapies, biodegradable scaffolds, and biomimetic patches. Low-intensity pulsed ultrasound and extracorporeal shockwave treatment may affect tendon-to-bone healing by means of mechanical forces that stimulate biological cascades at the insertion site. Application of various loading methods and immobilization times influence the stress forces acting on the recently repaired tendon-to-bone attachment, which eventually may change the biological dynamics of the interface. Other approaches, such as the use of coated sutures and interference screws, aim to deliver biological factors while achieving mechanical stability by means of various fixators. Controlled Level-I human trials are required to confirm the promising results from in vitro or animal research studies elucidating the mechanisms underlying tendon-to-bone healing and to translate these results into clinical practice. PMID:24647509

  7. Rotor Design for Diffuser Augmented Wind Turbines

    Directory of Open Access Journals (Sweden)

    Søren Hjort

    2015-09-01

    Full Text Available Diffuser augmented wind turbines (DAWTs can increase mass flow through the rotor substantially, but have often failed to fulfill expectations. We address high-performance diffusers, and investigate the design requirements for a DAWT rotor to efficiently convert the available energy to shaft energy. Several factors can induce wake stall scenarios causing significant energy loss. The causality between these stall mechanisms and earlier DAWT failures is discussed. First, a swirled actuator disk CFD code is validated through comparison with results from a far wake swirl corrected blade-element momentum (BEM model, and horizontal-axis wind turbine (HAWT reference results. Then, power efficiency versus thrust is computed with the swirled actuator disk (AD code for low and high values of tip-speed ratios (TSR, for different centerbodies, and for different spanwise rotor thrust loading distributions. Three different configurations are studied: The bare propeller HAWT, the classical DAWT, and the high-performance multi-element DAWT. In total nearly 400 high-resolution AD runs are generated. These results are presented and discussed. It is concluded that dedicated DAWT rotors can successfully convert the available energy to shaft energy, provided the identified design requirements for swirl and axial loading distributions are satisfied.

  8. Evaluating User Experience of Augmented Reality Eyeglasses.

    Science.gov (United States)

    Gamberini, Luciano; Orso, Valeria; Beretta, Andrea; Jacucci, Giulio; Spagnolli, Anna; Rimondi, Romina

    2015-01-01

    Augmented reality based applications have been experimented with in various contexts. Typically, the interaction is supported by handled devices, which, in specific scenarios, may hinder the interaction and spoil the experience of use, as the user is forced to hold the device and to keep her eyes on it at all times. The recent launch on the market of light-weight, unobtrusive head-mounted displays may change this circumstance. Nevertheless, investigations are needed to understand if such head-worn devices effectively outperform handheld devices in terms of comfort and pleasant experience of use. Here we present two experiments aimed at assessing the comfort of wearing a head-worn, see-through AR viewer in both a controlled and a natural setting. Besides the comfort of wearing the device, aspects related to the user experience were also investigated in the field evaluation. Our findings suggest that the head-mounted display examined is comfortable to wear regardless of the context of use. Interestingly in the field trails, participants did not express concern for the impression they would have made on other people and the experience of use was overall pleasant. Possible issues related to visual fatigue emerged.

  9. 3D augmented reality with integral imaging display

    Science.gov (United States)

    Shen, Xin; Hua, Hong; Javidi, Bahram

    2016-06-01

    In this paper, a three-dimensional (3D) integral imaging display for augmented reality is presented. By implementing the pseudoscopic-to-orthoscopic conversion method, elemental image arrays with different capturing parameters can be transferred into the identical format for 3D display. With the proposed merging algorithm, a new set of elemental images for augmented reality display is generated. The newly generated elemental images contain both the virtual objects and real world scene with desired depth information and transparency parameters. The experimental results indicate the feasibility of the proposed 3D augmented reality with integral imaging.

  10. Spatial augmented reality merging real and virtual worlds

    CERN Document Server

    Bimber, Oliver

    2005-01-01

    Like virtual reality, augmented reality is becoming an emerging platform in new application areas for museums, edutainment, home entertainment, research, industry, and the art communities using novel approaches which have taken augmented reality beyond traditional eye-worn or hand-held displays. In this book, the authors discuss spatial augmented reality approaches that exploit optical elements, video projectors, holograms, radio frequency tags, and tracking technology, as well as interactive rendering algorithms and calibration techniques in order to embed synthetic supplements into the real

  11. Intravenous alpha-1 antitrypsin augmentation therapy: systematic review

    DEFF Research Database (Denmark)

    Gøtzsche, Peter C; Johansen, Helle Krogh

    2010-01-01

    We reviewed the benefits and harms of augmentation therapy with alpha-1 antitrypsin in patients with alpha-1 antitrypsin deficiency and lung disease. We searched for randomised trials comparing augmentation therapy with placebo or no treatment in PubMed and ClinicalTrials (7 January 2010). Two...... (difference 1.14 g/l; 95% confidence interval 0.14 to 2.14; p = 0.03) over the total course of the trials. Augmentation therapy with alpha-1 antitrypsin cannot be recommended in view of the lack of evidence of clinical benefit and the cost of treatment....

  12. Augmented reality as a design tool for mobile interfaces

    DEFF Research Database (Denmark)

    Bertelsen, Olav Wedege; Nielsen, Christina

    2000-01-01

    This paper challenges user interface paradigms for mobile devices, by using the technical classification of augmented reality interfaces as a thinking tool to develop ideas for interaction with mobile devices. The paper presents future work scenarios from a wastewater treatment plant embodying PDA...... applications derived from the classification of augmented reality interfaces. The focus on physical interaction with objects of work and with the mobile device provides us with a range of interaction styles, based on e.g. gestures and manipulation of objects. Furthermore, issues of transparency and directness...... are addressed. The future scenarios indicate that the concepts of augmented reality support solving context problems in mobile design....

  13. Prototype Application of Portable Augmented Reality Technology for Enhancement of Space and Planetary Exploration Project

    Data.gov (United States)

    National Aeronautics and Space Administration — For this project, several different augmentation techniques for locating ground articles from distance through an augmented live view were investigated....

  14. Incorporation of tryptophan analogues into the lantibiotic nisin.

    Science.gov (United States)

    Zhou, Liang; Shao, Jinfeng; Li, Qian; van Heel, Auke J; de Vries, Marcel P; Broos, Jaap; Kuipers, Oscar P

    2016-05-01

    Lantibiotics are posttranslationally modified peptides with efficient inhibitory activity against various Gram-positive bacteria. In addition to the original modifications, incorporation of non-canonical amino acids can render new properties and functions to lantibiotics. Nisin is the most studied lantibiotic and contains no tryptophan residues. In this study, a system was constructed to incorporate tryptophan analogues into nisin, which included the modification machinery (NisBTC) and the overexpression of tryptophanyl-tRNA synthetase (TrpRS). Tryptophan and three different tryptophan analogues (5-fluoroTrp (5FW), 5-hydroxyTrp (5HW) and 5-methylTrp (5MeW)) were successfully incorporated at four different positions of nisin (I1W, I4W, M17W and V32W). The incorporation efficiency of tryptophan analogues into mutants I1W, M17W and V32W was over 97 %, while the mutant I4W showed relatively low incorporation efficiency (69-93 %). The variants with 5FW showed relatively higher production yield, while 5MeW-containing variants showed the lowest yield. The dehydration efficiency of serines or threonines was affected by the tryptophan mutants of I4W and V32W. The affinity of the peptides for the cation-ion exchange and reverse phase chromatography columns was significantly reduced when 5HW was incorporated. The antimicrobial activity of IIW and its 5FW analogue both decreased two times compared to that of nisin, while that of its 5HW analogue decreased four times. The 5FW analogue of I4W also showed two times decreased activity than nisin. However, the mutant M17W and its 5HW analogue both showed 32 times reduced activity relative to that of nisin.

  15. Insulin analogues and cancer: a note of caution

    Directory of Open Access Journals (Sweden)

    Joseph A.M.J.L. eJanssen

    2014-05-01

    Full Text Available Abstract In view of the lifelong exposure and large patient populations involved, insulin analogues with an increased mitogenic effect in comparison to human insulin may potentially constitute a major health problem, since these analogues may possibly induce the growth of pre-existing neoplasms. At present, the available data suggest that insulin analogues are safe. In line with these findings, we observed that serum of diabetic patients treated with insulin analogues, compared to that of diabetic patients treated with human insulin, did not induce an increased phosphorylation of tyrosine residues of the insulin-like growth factor-I receptor (IGF-IR. However, the classical model of the IGF-IR signaling may be insufficient to explain (all mitogenic effects of insulin analogues since also non-canonical signaling pathways of the IGF-IR may play a major role in this respect. Although phosphorylation of tyrosine residues of the IGF-IR is generally considered to be the initial activation step within the intracellular IGF-IR signaling pathway, it has been found that cells undergo a signaling switch under hyperglycemic conditions. After this switch, a completely different mechanism is utilized to activate the mitogenic (mitogen-activated protein kinase (MAPK pathways of the IGF-IR that is independent from tyrosine phosphorylation of the IGF-IR. At present it is unknown whether activation of this alternative intracellular pathway of the IGF-IR occurs during hyperglycemia in vivo and whether it is stronger in patients treated with (some insulin analogues than in patients treated with human insulin. In addition, it is unknown whether the insulin receptors (IRs also undergo a signaling switch during hyperglycemia. This should be investigated in future studies. Finally, relative overexpression of IR isoform A (IR-A in (pre cancer tissues may play a key role in the development and progression of human cancers during treatment with insulin (analogues. Further

  16. Dihydrobenzofuran analogues of hallucinogens. 4. Mescaline derivatives.

    Science.gov (United States)

    Monte, A P; Waldman, S R; Marona-Lewicka, D; Wainscott, D B; Nelson, D L; Sanders-Bush, E; Nichols, D E

    1997-09-12

    hallucinogens, that such compounds must be full agonists at the 5-HT2A receptor subtype. In contrast to the 2,5-dimethoxy-substituted phenethylamines, where rigidification of the methoxy groups had no deleterious effect on activity, the loss of activity in the 3,4,5-trioxygenated mescaline analogues may suggest that the 3 and 5 methoxy groups must remain conformationally mobile to enable receptor activation.

  17. Iron isotopes in an Archean ocean analogue

    Science.gov (United States)

    Busigny, Vincent; Planavsky, Noah J.; Jézéquel, Didier; Crowe, Sean; Louvat, Pascale; Moureau, Julien; Viollier, Eric; Lyons, Timothy W.

    2014-05-01

    Iron isotopes have been extensively used to trace the history of microbial metabolisms and the redox evolution of the oceans. Archean sedimentary rocks display greater variability in iron isotope ratios and more markedly negative values than those deposited in the Proterozoic and Phanerozoic. This increased variability has been linked to changes in either water column iron cycling or the extent of benthic microbial iron reduction through time. We tested these contrasting scenarios through a detailed study of anoxic and ferruginous Lac Pavin (France), which can serve as a modern analogue of the Archean ocean. A depth-profile in the water column of Lac Pavin shows a remarkable increase in dissolved Fe concentration (0.1-1200 μM) and δ56Fe values (-2.14‰ to +0.31‰) across the oxic-anoxic boundary to the lake bottom. The largest Fe isotope variability is found at the redox boundary and is related to partial oxidation of dissolved ferrous iron, leaving the residual Fe enriched in light isotopes. The analysis of four sediment cores collected along a lateral profile (one in the oxic layer, one at the redox boundary, one in the anoxic zone, and one at the bottom of the lake) indicates that bulk sediments, porewaters, and reactive Fe mostly have δ56Fe values near 0.0 ± 0.2‰, similar to detrital iron. In contrast, pyrite δ56Fe values in sub-chemocline cores (60, 65, and 92 m) are highly variable and show significant deviations from the detrital iron isotope composition (δ56Fepyrite between -1.51‰ and +0.09‰; average -0.93‰). Importantly, the pyrite δ56Fe values mirror the δ56Fe of dissolved iron at the redox boundary—where near quantitative sulfate and sulfide drawdown occurs—suggesting limited iron isotope fractionation during iron sulfide formation. This finding has important implications for the Archean environment. Specifically, this work suggests that in a ferruginous system, most of the Fe isotope variability observed in sedimentary pyrites can

  18. Lift Augmentation for Vertical Axis Wind Turbines

    Directory of Open Access Journals (Sweden)

    Gerald M Angle II

    2010-12-01

    Full Text Available The concept of harnessing wind power has been around for centuries, and is first recorded by the Persians in 900 AD. These early uses of wind power were for the processing of food, particularly grinding grains, and consisted of stationary blades around a horizontal axis, the precursor to today’s horizontal axis wind turbines (HAWT. Technology for these wind mills was essentially the same until the 1930’s when advances in aircraft propeller theories were applied to the blades of the turbine. During this development period, which has since remained basically unchanged, the design push was for increasingly larger propellers requiring heavy and costly transmissions, generators, and support towers to be installed. An alternative concept to the HAWT was developed by Georges Darrieus [5], which utilized a vertical shaft and is known as a vertical axis wind turbine (VAWT. The scientific development of the concept did not gain strong attention until the 1970’s due to the perceived low efficiency of this style. This perception was due in part to the portion of the blade’s rotary path that is adverse to the generation of power. This efficiency loss can be minimized by the mechanical movement of the blade, relative to the airflow during the upwind portion of the blades’ rotational path. Since, circulation control can alter the forces generated by an airfoil, it could be used to increase the efficiency of a VAWT by increasing the torque produced on the downwind portion of the path, while removing the need for a physical change in angle of attack. With the recent upturn in petroleum costs and global warming concerns, interest in renewable energy technologies have been reinvigorated, in particular the desire for advanced wind energy technologies, including the application of lift augmentation techniques. One of these techniques is to utilize circulation control to enhance the lifting capacity of the blades based on the location of the blade in the

  19. Augmenting the Deliberative Method for Ranking Risks.

    Science.gov (United States)

    Susel, Irving; Lasley, Trace; Montezemolo, Mark; Piper, Joel

    2016-01-01

    The Department of Homeland Security (DHS) characterized and prioritized the physical cross-border threats and hazards to the nation stemming from terrorism, market-driven illicit flows of people and goods (illegal immigration, narcotics, funds, counterfeits, and weaponry), and other nonmarket concerns (movement of diseases, pests, and invasive species). These threats and hazards pose a wide diversity of consequences with very different combinations of magnitudes and likelihoods, making it very challenging to prioritize them. This article presents the approach that was used at DHS to arrive at a consensus regarding the threats and hazards that stand out from the rest based on the overall risk they pose. Due to time constraints for the decision analysis, it was not feasible to apply multiattribute methodologies like multiattribute utility theory or the analytic hierarchy process. Using a holistic approach was considered, such as the deliberative method for ranking risks first published in this journal. However, an ordinal ranking alone does not indicate relative or absolute magnitude differences among the risks. Therefore, the use of the deliberative method for ranking risks is not sufficient for deciding whether there is a material difference between the top-ranked and bottom-ranked risks, let alone deciding what the stand-out risks are. To address this limitation of ordinal rankings, the deliberative method for ranking risks was augmented by adding an additional step to transform the ordinal ranking into a ratio scale ranking. This additional step enabled the selection of stand-out risks to help prioritize further analysis. PMID:26224206

  20. Transparent 3D display for augmented reality

    Science.gov (United States)

    Lee, Byoungho; Hong, Jisoo

    2012-11-01

    Two types of transparent three-dimensional display systems applicable for the augmented reality are demonstrated. One of them is a head-mounted-display-type implementation which utilizes the principle of the system adopting the concave floating lens to the virtual mode integral imaging. Such configuration has an advantage in that the threedimensional image can be displayed at sufficiently far distance resolving the accommodation conflict with the real world scene. Incorporating the convex half mirror, which shows a partial transparency, instead of the concave floating lens, makes it possible to implement the transparent three-dimensional display system. The other type is the projection-type implementation, which is more appropriate for the general use than the head-mounted-display-type implementation. Its imaging principle is based on the well-known reflection-type integral imaging. We realize the feature of transparent display by imposing the partial transparency to the array of concave mirror which is used for the screen of reflection-type integral imaging. Two types of configurations, relying on incoherent and coherent light sources, are both possible. For the incoherent configuration, we introduce the concave half mirror array, whereas the coherent one adopts the holographic optical element which replicates the functionality of the lenslet array. Though the projection-type implementation is beneficial than the head-mounted-display in principle, the present status of the technical advance of the spatial light modulator still does not provide the satisfactory visual quality of the displayed three-dimensional image. Hence we expect that the head-mounted-display-type and projection-type implementations will come up in the market in sequence.

  1. Improving Robotic Operator Performance Using Augmented Reality

    Science.gov (United States)

    Maida, James C.; Bowen, Charles K.; Pace, John W.

    2007-01-01

    The Special Purpose Dexterous Manipulator (SPDM) is a two-armed robot that functions as an extension to the end effector of the Space Station Robotics Manipulator System (SSRMS), currently in use on the International Space Station (ISS). Crew training for the SPDM is accomplished using a robotic hardware simulator, which performs most of SPDM functions under normal static Earth gravitational forces. Both the simulator and SPDM are controlled from a standard robotic workstation using a laptop for the user interface and three monitors for camera views. Most operations anticipated for the SPDM involve the manipulation, insertion, and removal of any of several types of Orbital Replaceable Unit (ORU), modules which control various ISS functions. Alignment tolerances for insertion of the ORU into its receptacle are 0.25 inch and 0.5 degree from nominal values. The pre-insertion alignment task must be performed within these tolerances by using available video camera views of the intrinsic features of the ORU and receptacle, without special registration markings. Since optimum camera views may not be available, and dynamic orbital lighting conditions may limit periods of viewing, a successful ORU insertion operation may require an extended period of time. This study explored the feasibility of using augmented reality (AR) to assist SPDM operations. Geometric graphical symbols were overlaid on one of the workstation monitors to afford cues to assist the operator in attaining adequate pre-insertion ORU alignment. Twelve skilled subjects performed eight ORU insertion tasks using the simulator with and without the AR symbols in a repeated measures experimental design. Results indicated that using the AR symbols reduced pre-insertion alignment error for all subjects and reduced the time to complete pre-insertion alignment for most subjects.

  2. Dry cooling tower with water augmentation

    Energy Technology Data Exchange (ETDEWEB)

    Ireland, R.G.; Tramontini, V.N.

    1981-06-23

    An air cooling tower system is disclosed for condensing exhaust steam in power plants, that has water cooling augmentation to maintain the plant cooling capacity during high atmospheric temperature periods. The cooling tower includes a plurality of banks of brazed aluminum plate and fin type heat exchangers arranged in inverted ''v'' shaped sets. These heat exchangers cool ammonia used as the cooling fluid in the primary condenser for the power plant turbine exhaust steam. Each of these heat exchangers has a core consisting of a plurality of parallel aluminum plates spaced apart by fin assemblies that define a plurality of fluid passes. Approximately every other one of these passes has closed sides that open at the ends of the core to headers and define ammonia passes. The passes adjacent the ammonia passes are open at the sides and define air passes that permit the free flow of air transversely through the heat exchanger cores. An additional pass is provided adjacent every fourth one of the ammonia passes and these have closed sides and ends and define the passes for the cooling water. The water passes communicate at the bottom of the core with a water inlet manifold and at the top of the core with a water outlet manifold. The cooling tower system is designed so that at 55 degrees fahrenheit air temperatures or below, the cooling air alone will provide the necessary cooling for the ammonia to satisfy plant requirements. Above 55 degrees fahrenheit air temperature, cooling water from a separate water tank is pumped through the water passes to provide an additional cooling effect to maintain the design cooling capacity.

  3. Third-generation percutaneous vertebral augmentation systems

    Science.gov (United States)

    Galzio, Renato; Kazakova, Anna; Pantalone, Andrea; Grillea, Giovanni; Bartolo, Marcello; Salini, Vincenzo; Magliani, Vincenzo

    2016-01-01

    Currently, there is no general consensus about the management of osteoporotic vertebral fractures (OVF). In the past, conservative treatment for at least one month was deemed appropriate for the majority of vertebral fractures. When pain persisted after conservative treatment, it was necessary to consider surgical interventions including: vertebroplasty for vertebral fractures with less than 30% loss of height of the affected vertebral body and kyphoplasty for vertebral fractures with greater than 30% loss of height. Currently, this type of treatment is not feasible. Herein we review the characteristics and methods of operation of three of the most common percutaneous vertebral augmentation systems (PVAS) for the treatment of OVF: Vertebral Body Stenting® (VBS), OsseoFix® and Spine Jack®. VBS is a titanium device accompanied by a hydraulic (as opposed to mechanical) working system which allows a partial and not immediate possibility to control the opening of the device. On the other hand, OsseoFix® and Spine Jack® are accompanied by a mechanical working system which allows a progressive and controlled reduction of the vertebral fracture. Another important aspect to consider is the vertebral body height recovery. OsseoFix® has an indirect mechanism of action: the compaction of the trabecular bone causes an increase in the vertebral body height. Unlike the Vertebral Body Stenting® and Spine Jack®, the OsseoFix® has no direct lift mechanism. Therefore, for these characteristics and for the force that this device is able to provide. In our opinion, Spine Jack® is the only device also suitable for the treatment OVF, traumatic fracture (recent, old or inveterate) and primary or secondary bone tumors. PMID:27683690

  4. Telescopic multi-resolution augmented reality

    Science.gov (United States)

    Jenkins, Jeffrey; Frenchi, Christopher; Szu, Harold

    2014-05-01

    To ensure a self-consistent scaling approximation, the underlying microscopic fluctuation components can naturally influence macroscopic means, which may give rise to emergent observable phenomena. In this paper, we describe a consistent macroscopic (cm-scale), mesoscopic (micron-scale), and microscopic (nano-scale) approach to introduce Telescopic Multi-Resolution (TMR) into current Augmented Reality (AR) visualization technology. We propose to couple TMR-AR by introducing an energy-matter interaction engine framework that is based on known Physics, Biology, Chemistry principles. An immediate payoff of TMR-AR is a self-consistent approximation of the interaction between microscopic observables and their direct effect on the macroscopic system that is driven by real-world measurements. Such an interdisciplinary approach enables us to achieve more than multiple scale, telescopic visualization of real and virtual information but also conducting thought experiments through AR. As a result of the consistency, this framework allows us to explore a large dimensionality parameter space of measured and unmeasured regions. Towards this direction, we explore how to build learnable libraries of biological, physical, and chemical mechanisms. Fusing analytical sensors with TMR-AR libraries provides a robust framework to optimize testing and evaluation through data-driven or virtual synthetic simulations. Visualizing mechanisms of interactions requires identification of observable image features that can indicate the presence of information in multiple spatial and temporal scales of analog data. The AR methodology was originally developed to enhance pilot-training as well as `make believe' entertainment industries in a user-friendly digital environment We believe TMR-AR can someday help us conduct thought experiments scientifically, to be pedagogically visualized in a zoom-in-and-out, consistent, multi-scale approximations.

  5. MARKOV GRAPHS OF ONE–DIMENSIONAL DYNAMICAL SYSTEMS AND THEIR DISCRETE ANALOGUES AND THEIR DISCRETE ANALOGUES

    Directory of Open Access Journals (Sweden)

    SERGIY KOZERENKO

    2016-04-01

    Full Text Available One feature of the famous Sharkovsky’s theorem is that it can be proved using digraphs of a special type (the so–called Markov graphs. The most general definition assigns a Markov graph to every continuous map from the topological graph to itself. We show that this definition is too broad, i.e. every finite digraph can be viewed as a Markov graph of some one–dimensional dynamical system on a tree. We therefore consider discrete analogues of Markov graphs for vertex maps on combinatorial trees and characterize all maps on trees whose discrete Markov graphs are of the following types: complete, complete bipartite, the disjoint union of cycles, with every arc being a loop.

  6. Minimally Invasive Spinal Arthrodesis in Osteoporotic Population Using a Cannulated and Fenestrated Augmented Screw: Technical Description and Clinical Experience

    Directory of Open Access Journals (Sweden)

    Alphonse Lubansu

    2012-01-01

    Full Text Available We describe a percutaneous or minimally invasive approach to apply an augmentation of pedicle fenestrated screws by injection of the PMMA bone cement through the implant and determine the safety and efficiency of this technique in a clinical series of 15 elderly osteoporotic patients. Clinical outcome and the function were assessed using respectively the Visual Analogue Scale (VAS score and the Oswestry Disability Index (ODI. Peri- and post-operative complications were monitored during a minimum of 2 years of follow-up. Radiographic follow-up was based on plain fluoroscopic control at 3, 6 and 12 months and every year. In this approach, four steps were considered with care: optimal positioning of the screws, correct alignment of the screw heads, waiting time before the injection of cement, fluoroscopic control of the cement injection. Using these precautions, only 2 minor complications occurred. VAS scores and ODI questionnaires showed a statistically significant improvement up to 13.3 months postoperatively. No radiological complications were observed. Based on this experience, PMMA augmentation technique through the novel fenestrated screws provided an effective and long lasting fixation in osteoporotic patients. Applying this procedure through percutaneous or minimally invasive approach under fluoroscopic control seems to be safe.

  7. Context-Augmented Robotic Interaction Layer (CARIL) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Today, as humans reach beyond the earth to near and deep space, there is obvious and urgent need to augment the capabilities of human astronauts and (ground-)...

  8. Virtual, augmented reality and serious games for healthcare

    CERN Document Server

    Jain, Lakhmi; Anderson, Paul

    2014-01-01

    There is a tremendous interest among researchers for the development of virtual, augmented reality and games technologies due to their widespread applications in medicine and healthcare. To date the major applications of these technologies include medical simulation, telemedicine, medical and healthcare training, pain control, visualisation aid for surgery, rehabilitation in cases such as stroke, phobia, and trauma therapies. Many recent studies have identified the benefits of using Virtual Reality, Augmented Reality, or serious games in a variety of medical applications.   This research volume on Virtual, Augmented Reality and Serious Games for Healthcare 1 offers an insightful introduction to the theories, development and applications of virtual, augmented reality and digital games technologies in medical and clinical settings and healthcare in general. It is divided into six sections: section one presents a selection of applications in medical education and healthcare management; Section two relates to th...

  9. Mobile Cloud Computing: A Review on Smartphone Augmentation Approaches

    CERN Document Server

    Abolfazli, Saeid; Gani, Abdullah

    2012-01-01

    Smartphones have recently gained significant popularity in heavy mobile processing while users are increasing their expectations toward rich computing experience. However, resource limitations and current mobile computing advancements hinder this vision. Therefore, resource-intensive application execution remains a challenging task in mobile computing that necessitates device augmentation. In this article, smartphone augmentation approaches are reviewed and classified in two main groups, namely hardware and software. Generating high-end hardware is a subset of hardware augmentation approaches, whereas conserving local resource and reducing resource requirements approaches are grouped under software augmentation methods. Our study advocates that consreving smartphones' native resources, which is mainly done via task offloading, is more appropriate for already-developed applications than new ones, due to costly re-development process. Cloud computing has recently obtained momentous ground as one of the major co...

  10. Virtual and augmented reality for training on maintenance

    International Nuclear Information System (INIS)

    This paper presents two projects focused to support training on maintenance using new technologies. Both projects aims at specifying. designing, developing, and demonstrating prototypes allowing computer guided maintenance of complex mechanical elements using Virtual Reality (VIRMAN) and Augmented Reality (STARMATE) techniques. VIRMAN project is dedicated to training course development on maintenance using Virtual Reality. It based in the animation of three dimension images for component assembly/de-assembly or equipment movements. STARMATE will rely on Augmented Reality techniques which is a growing area in virtual Reality research. The idea of Augmented Reality is to combine a real scene, viewed by the user, with a virtual scene generated by a computer augmenting the reality with additional information. (Author)

  11. Aircraft Control Augmentation and Health Monitoring Using FADS Technology Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Phase I research proposal is aimed at demonstrating the feasibility of an innovative architecture comprising control augmentation and on-line health monitoring...

  12. Exploring Urban Environments Using Virtual and Augmented Reality

    Directory of Open Access Journals (Sweden)

    Stelios Papakonstantinou

    2007-02-01

    Full Text Available In this paper, we propose the use of specific system architecture, based on mobile device, for navigation in urban environments. The aim of this work is to assess how virtual and augmented reality interface paradigms can provide enhanced location based services using real-time techniques in the context of these two different technologies. The virtual reality interface is based on faithful graphical representation of the localities of interest, coupled with sensory information on the location and orientation of the user, while the augmented reality interface uses computer vision techniques to capture patterns from the real environment and overlay additional way-finding information, aligned with real imagery, in real-time. The knowledge obtained from the evaluation of the virtual reality navigational experience has been used to inform the design of the augmented reality interface. Initial results of the user testing of the experimental augmented reality system for navigation are presented.

  13. Augmented reality aiding collimator exchange at the LHC

    International Nuclear Information System (INIS)

    Novel Augmented Reality techniques have the potential to have a large positive impact on the way remote maintenance operations are carried out in hazardous areas, e.g. areas where radiation doses that imply careful planning and optimization of maintenance operations are present. This paper describes an Augmented Reality strategy, system and implementation for aiding the remote collimator exchange in the LHC, currently the world's largest and highest-energy particle accelerator. The proposed system relies on marker detection and multi-modal augmentation in real-time. A database system has been used to ensure flexibility. The system has been tested in a mock-up facility, showing real time performance and great potential for future use in the LHC. The technical-scientific difficulties identified during the development of the system and the proposed solutions described in this paper may help the development of future Augmented Reality systems for remote handling in scientific facilities

  14. [Cement augmentation of pedicle screws : Pros and cons].

    Science.gov (United States)

    Schnake, K J; Blattert, T R; Liljenqvist, U

    2016-09-01

    Cement augmentation of pedicle screws biomechanically increases screw purchase in the bone. However, clinical complications may occur. The pros and cons of the technique are discussed from different clinical perspectives. PMID:27514827

  15. Augmented Reality a Review on Technology and Applications

    Science.gov (United States)

    Petruse, Radu Emanuil; Bondrea, Ioan

    2014-11-01

    We present in this paper an overview of the concepts and potential industrial Augmented Reality applications that can be very efficient. We also present the basic technological requirements for an AR system

  16. Dimensions of Mobile Augmented Reality for Learning: A First Inventory

    NARCIS (Netherlands)

    Specht, Marcus; Ternier, Stefaan; Greller, Wolfgang

    2011-01-01

    Specht, M., Ternier, S., & Greller, W. (2011). Dimensions of Mobile Augmented Reality for Learning: A First Inventory. Journal of the Research for Educational Technology (RCET), 7(1), 117-127. Spring 2011.

  17. Die Welt als Spielfeld: Mobile Serious Games mit Augmented Reality

    NARCIS (Netherlands)

    Klemke, Roland; Schneider, Jan; Happe, Sven; Bockelmann, Timo; Börner, Dirk; Specht, Marcus

    2014-01-01

    Technological innovations enable us to connect computer games with the environment they are played in: augmented reality games take the world as their playground. In this talk, the use of such technologies for mobile serious games is explored.

  18. Augmented Reality System for E-maintenance Application

    Science.gov (United States)

    Benbelkacem, S.; Zenati-Henda, N.; Belhocine, M.; Malek, S.

    2009-03-01

    We present in this paper an Augmented Reality platform for e-maintenance application. In our case, the aim is not to develop a vision system based on augmented reality concept, but to show the relationship between the different actors in the proposed architecture and to facilitate maintenance of the machine. With this platform we identify all possible scenarios which allow the technician to intervene on a machine breakdown using distant expert if necessary. Each scenario depends on the machine parameters and the technician competences. To implement a configuration of Augmented Reality system, we chose a case study of maintenance scenario for machine breakdown. Then we represent this scenario by an interaction model which allows establishing Augmented Reality configuration.

  19. Transpedicle body augmenter for vertebral augmentation in symptomatic multiple osteoporotic compression fractures

    Directory of Open Access Journals (Sweden)

    Li Allen

    2010-01-01

    Full Text Available Background: Multiple osteoporotic vertebral compression fractures (VCFs have been treated with polymethylmethacrylate augmentation; however, there are cement complications and long-term fracture healing that are unknown. Transpedicle body augmenter (a porous titanium spacer has been reported as an internal support to reconstruct the vertebral body combining short-segment fixation in burst fracture and Kümmell′s disease with cord compression. Transpedicle body augmenter for vertebral augmentation (TpBA also has been reported successfully in treating single painful VCF and vertebral metastasis lesions including pending fractures and pathologic compression fractures. To test the hypothesis that TpBA can effectively and safely treat the symptomatic multiple VCFs, this retrospective study was done by analyzing the radiographic and clinical results. Materials and Methods: We retrospectively reviewed clinical and radiographic results of TpBA for symptomatic multiple (more than two levels VCFs in 62 patients with a total of 236 levels, i.e. 3.8 VCFs per patient. Manual reduction and TpBA via paramedian incisions with blunt dissection were done. One incision was made for two continuous levels and alternative side was selected for next incision. Mean age was 74.3 years (range, 62-87 years, and female-male ratio was 5.2:1. Anterior vertebral height and wedge angle by radiographic findings were measured at preoperative, initial follow-up and final follow-up. Clinical results were assessed by questionnaires and clinical observations. By July 2008, 58 patients returned to answer the questionnaire including quantification of pain on the visual analog scale, the response to operations (better, same, or worse after operation, returned to their pre-fracture function (yes/no and satisfaction (a scale of 0 = completely dissatisfied to 10 = completely satisfied. Results: The mean symptom duration was 7 months, and follow-up, 48 months. The average operation time

  20. Review of insulin and its analogues in diabetes mellitus.

    Science.gov (United States)

    Mane, Krishnappa; Chaluvaraju, Kc; Niranjan, Ms; Zaranappa, Tr; Manjuthej, Tr

    2012-03-01

    Diabetes is a metabolic disorder where in human body does not produce or properly uses insulin, a hormone that is required to convert sugar, starches and other food into energy. Diabetes finally leads to more complications and to prevent these complications insulin and its analogues are used. After more than half a century of treating diabetics with animal insulin's, recombinant DNA technologies and advanced protein chemistry made human insulin preparations available in the early 1980s. As the next step, over the last decade, insulin analogues were constructed by changing the structure of the native protein with the goal of improving the therapeutic properties of it, because the pharmacokinetic characteristics of rapid, intermediate and long-acting preparations of human insulin make it almost impossible to achieve sustained normoglycemia. The first clinically available insulin analogue, lispro, confirmed the hopes by showing that improved glycaemic control can be achieved without an increase in hypoglycaemic events. Two new insulin analogues, insulin glargine and insulin aspart, have recently been approved for clinical use in the United States and several other analogues are being intensively tested. PMID:24826038

  1. Central effects of angiotensin II, its fragment and analogues.

    Science.gov (United States)

    Georgiev, V P; Klousha, V E; Petkov, V D; Markovska, V L; Svirskis, S V; Mountsinietse, R K; Anouans, Z E

    1984-01-01

    The effects of the octapeptide angiotensin II (AT II), its fragment Ile8 AT3-8 and the analogues Sar1 Ala8 AT II, Ala8 AT II and Ile8 AT II were studied with respect to: the level of biogenic amines (DA, 5-HT and their metabolites HVA and 5-HIAA) in the forebrain; the behaviour of the animals--haloperidol catalepsy, apomorphine stereotypy, unconditioned jumping reaction (UJR), convulsive threshold. Good correlation was found between the biochemical and behavioural effects. The fragment of AT II where phenylalanine is substituted at the C-terminal by Ile reduces the haloperidol-increased content of HVA, potentiates apomorphine stereotypy and reduces catalepsy, whereas the AT II analogues (where the C-terminal phenylalanine is substituted by Ala, and the N-terminal--by Sar) potentiate the effect of haloperidol increasing the HVA content, reduce apomorphine stereotypy and potentiate catalepsy; saralasine independently applied induces brief catalepsy; AT II, its fragment and analogues inhibit UJR, in combination with amphetamine and PTZ this effect becomes deeper; the duration of hexobarbital sleep is increased. The peptides investigated increase the convulsive threshold. The results show that the hexapeptide fragment has preserved the effects of AT II, whereas in the analogues (with changed C- and N-terminals) they are changed. The results obtained may be explained with the modulating influence of AT II-receptors on the DA-ergic receptors in the brain structures with which AT II and its fragment and analogues enter in contact.

  2. Sodium Metasilicate Cemented Analogue Material and Its Mechanical Properties

    Directory of Open Access Journals (Sweden)

    Songlin Yue

    2016-01-01

    Full Text Available Analogue material with appropriate properties is of great importance to the reliability of geomechanical model test, which is one of the mostly used approaches in field of geotechnical research. In this paper, a new type of analogue material is developed, which is composed of coarse aggregate (quartz sand and/or barite sand, fine aggregate (barite powder, and cementitious material (anhydrous sodium silicate. The components of each raw material are the key influencing factors, which significantly affect the physical and mechanical parameters of analogue materials. In order to establish the relationship between parameters and factors, the material properties including density, Young’s modulus, uniaxial compressive strength, and tensile strength were investigated by a series of orthogonal experiments with hundreds of samples. By orthogonal regression analysis, the regression equations of each parameter were obtained based on experimental data, which can predict the properties of the developed analogue materials according to proportions. The experiments and applications indicate that sodium metasilicate cemented analogue material is a type of low-strength and low-modulus material with designable density, which is insensitive to humidity and temperature and satisfies mechanical scaling criteria for weak rock or soft geological materials. Moreover, the developed material can be easily cast into structures with complex geometry shapes and simulate the deformation and failure processes of prototype rocks.

  3. Augmented communication with haptic I/O in mobile devices

    OpenAIRE

    Haverinen, Laura

    2012-01-01

    Nonverbal communication is a very important part of face to face communication. Both explicit and implicit additions to verbal communication augment the information content of communication. Before telephones did not provide any means for adding nonverbal information to the communication, but now, as the technology has advanced, it is possible to start augmenting also the communication on the phone. Adding a haptic I/O device to a regular mobile phone opens possibilities to add value to commu...

  4. Online Registration Tool and Markerless Tracking for Augmented Reality

    OpenAIRE

    Marimon, D.; Abdeljaoued, Y.; Ebrahimi, T.

    2005-01-01

    This paper presents a markerless tracking algorithm for augmented reality with no constraints in the geometry of the scene. User’s pose is estimated using natural feature point extraction and tracking, and the epipolar geometry constraint between camera views. An online registration tool is also described. With this procedure, the user determines the initial 3D pose of the virtual object that augments the scene. Validation and discussions about advantages of this algorithm along with further ...

  5. Injectable Tissue-Engineered Soft Tissue for Tissue Augmentation

    OpenAIRE

    Rhee, Sung-Mi; You, Hi-Jin; Han, Seung-Kyu

    2014-01-01

    Soft tissue augmentation is a process of implanting tissues or materials to treat wrinkles or soft tissue defects in the body. Over the years, various materials have evolved to correct soft tissue defects, including a number of tissues and polymers. Autogenous dermis, autogenous fat, autogenous dermis-fat, allogenic dermis, synthetic implants, and fillers have been widely accepted for soft tissue augmentations. Tissue engineering technology has also been introduced and opened a new venue of o...

  6. Magnetic field induced augmented thermal conduction phenomenon in magneto nanocolloids

    OpenAIRE

    Katiyar, Ajay; Dhar, Purbarun; Nandi, Tandra; Das, Sarit K

    2015-01-01

    Magnetic field induced drastically augmented thermal conductivity of magneto nanocolloids involving magnetic oxide nanoparticles, viz. Fe2O3, Fe3O4, Nickel oxide (NiO), Cobalt oxide (Co3O4), dispersed in different base fluids (heat transfer oil, kerosene, and ethylene glycol) have been reported. Experiments reveal the augmented thermal transport under the external applied magnetic field, with kerosene based MNCs showing at relatively low magnetic field intensities as compared to the heat tran...

  7. Augmented Reality user interface analysis in mobile devices

    OpenAIRE

    Guzmán Guzmán, José Daniel

    2014-01-01

    [ENGLISH] The presence of high-end phones in the telephony market, has allowed consumers to have access to the computational power of mobile smart-phone devices. Powerful processors, combined with cameras and ease of development encourage an increasing number of Augmented Reality (AR) researchers to adopt mobile smart-phones as AR platform. The same way, Augmented Reality on mobile devices has become increasingly popular for many applications, including search and location, tourism, and shopp...

  8. Augmented Reality Computer-Aided Drawing (AR-CAD)

    OpenAIRE

    ECT Team, Purdue

    2007-01-01

    While Virtual Reality (VR) replaces the entire real world with virtual images, Augmented Reality (AR) superimposes virtual images on the real world. Augmented Reality (a most useful form of Mixed Reality (MR)) is a popular concept for using computers to overlay virtual information onto a view of the real world. In 2000, Phillip Dunston then at the University of Washington in Seattle and his research team presented the initial concept of AR CAD developed for supporting design and construction....

  9. MHP Oriented Interactive Augmented Reality System for Sports Broadcasting Environments

    OpenAIRE

    Igor G. Olaizola; Martirena, Inigo Barandiaran; Kammann, Tobias D.

    2007-01-01

    Television and movie images have been altered ever since it was technically possible. Nowadays embedding advertisements, or incorporating text and graphics in TV scenes, are common practice, but they can not be considered as integrated part of the scene. The introduction of new services for interactive augmented television is discussed in this paper. We analyse the main aspects related with the whole chain of augmented reality production.Interactivity is one of the most important added values...

  10. DAARIA: Driver Assistance by Augmented Reality for Intelligent Automobile

    OpenAIRE

    George, Paul; Thouvenin, Indira; Fremont, Vincent; Cherfaoui, Véronique

    2012-01-01

    International audience Taking into account the drivers' state is a major challenge for designing new advanced driver assistance systems. In this paper we present a driver assistance system strongly coupled to the user. DAARIA 1 stands for Driver Assistance by Augmented Reality for Intelligent Automobile. It is an augmented reality interface powered by several sensors. The detection has two goals: one is the position of obstacles and the quantification of the danger represented by them. The...

  11. Thinking factory for the future: from PLM to augmented reality

    OpenAIRE

    Dhuieb, Mohamed Anis; BELKADI, Farouk; Florent LAROCHE; Bernard, Alain

    2014-01-01

    International audience Virtual engineering technologies become an emerging field in industry and research. Nowadays, industrials are using Virtual and Augmented Reality in different phases of their manufacturing process (advanced manufacturing process visualization, assembly tasks, training…). The purpose of this paper is to introduce the advantage of linking augmented reality application, to help employees on their daily tasks. This involves the connections with the existing components of...

  12. Cortical excitability changes following grasping exercise augmented with electrical stimulation

    DEFF Research Database (Denmark)

    Barsi, Gergely Istvan; Popovic, Dejan B.; Tarkka, Ina M.;

    2008-01-01

    Rehabilitation with augmented electrical stimulation can enhance functional recovery after stroke, and cortical plasticity may play a role in this process. The purpose of this study was to compare the effects of three training paradigms on cortical excitability in healthy subjects. Cortical......) functional electrical stimulation (FES) of the finger flexors and extensors, (2) voluntary movement (VOL) with sensory stimulation, and (3) therapeutic FES (TFES) where the electrical stimulation augmented voluntary activation. TFES training produced a significant increase in MEP magnitude throughout...

  13. Aerodynamic structures and processes in rotationally augmented flow fields

    DEFF Research Database (Denmark)

    Schreck, S.J.; Sørensen, Niels N.; Robinson, M.C.

    2007-01-01

    Rotational augmentation of horizontal axis wind turbine blade aerodynamics currently remains incompletely characterized and understood. To address this, the present study concurrently analysed experimental measurements and computational predictions, both of which were unique and of high quality...... to reliably identify and track pertinent features in the rotating blade boundary layer topology as they evolved in response to varying wind speed. Subsequently, boundary layer state was linked to above-surface flow field structure and used to deduce mechanisms; underlying augmented aerodynamic force...

  14. Portable augmentative and alternative communication device with pictogram recognition functionality

    OpenAIRE

    Ayyalasomayajula, Pradyumna; Grassi Pauletti, Sara; Deurin, Nicolas; Gueguen, Thierry; Vaucher, Christian; Muhlebach, Yves; Farine, Pierre-André; Guinand, Michel

    2009-01-01

    The field of electronic aid for disabled people has been growing constantly with many new innovations being added every year. The need for electronic aid in alternative and augmentative communication (ACC) is becoming increasingly important. Devices which describe extra ways of helping people who find it hard to communicate by speech or writing are being introduced into the market every year. A next generation device for alternative and augmentative communication which shall be used in rehab...

  15. The Visual Web User Interface Design in Augmented Reality Technology

    Directory of Open Access Journals (Sweden)

    Chouyin Hsu

    2013-03-01

    Full Text Available Upon the popularity of 3C devices, the visual creatures are all around us, such the online game, touch pad, video and animation. Therefore, the text-based web page will no longer satisfy users. With the popularity of webcam, digital camera, stereoscopic glasses, or head-mounted display, the user interface becomes more visual and multi-dimensional. For the consideration of 3D and visual display in the research of web user interface design, Augmented Reality technology providing the convenient tools and impressive effects becomes the hot topic. Augmented Reality effect enables users to represent parts of the digital objects on top of the physical surroundings. The easy operation with webcam greatly improving the visual representation of web pages becomes the interest of our research. Therefore, we apply Augmented Reality technology for developing a city tour web site to collect the opinions of users. Therefore, the website stickiness is an important measurement. The major tasks of the work include the exploration of Augmented Reality technology and the evaluation of the outputs of Augmented Reality. The feedback opinions of users are valuable references for improving AR application in the work. As a result, the AR increasing the visual and interactive effects of web page encourages users to stay longer and more than 80% of users are willing to return for visiting the website soon. Moreover, several valuable conclusions about Augmented Reality technology in web user interface design are also provided for further practical references.

  16. Augmented reality based real-time subcutaneous vein imaging system.

    Science.gov (United States)

    Ai, Danni; Yang, Jian; Fan, Jingfan; Zhao, Yitian; Song, Xianzheng; Shen, Jianbing; Shao, Ling; Wang, Yongtian

    2016-07-01

    A novel 3D reconstruction and fast imaging system for subcutaneous veins by augmented reality is presented. The study was performed to reduce the failure rate and time required in intravenous injection by providing augmented vein structures that back-project superimposed veins on the skin surface of the hand. Images of the subcutaneous vein are captured by two industrial cameras with extra reflective near-infrared lights. The veins are then segmented by a multiple-feature clustering method. Vein structures captured by the two cameras are matched and reconstructed based on the epipolar constraint and homographic property. The skin surface is reconstructed by active structured light with spatial encoding values and fusion displayed with the reconstructed vein. The vein and skin surface are both reconstructed in the 3D space. Results show that the structures can be precisely back-projected to the back of the hand for further augmented display and visualization. The overall system performance is evaluated in terms of vein segmentation, accuracy of vein matching, feature points distance error, duration times, accuracy of skin reconstruction, and augmented display. All experiments are validated with sets of real vein data. The imaging and augmented system produces good imaging and augmented reality results with high speed.

  17. Augmented reality based real-time subcutaneous vein imaging system.

    Science.gov (United States)

    Ai, Danni; Yang, Jian; Fan, Jingfan; Zhao, Yitian; Song, Xianzheng; Shen, Jianbing; Shao, Ling; Wang, Yongtian

    2016-07-01

    A novel 3D reconstruction and fast imaging system for subcutaneous veins by augmented reality is presented. The study was performed to reduce the failure rate and time required in intravenous injection by providing augmented vein structures that back-project superimposed veins on the skin surface of the hand. Images of the subcutaneous vein are captured by two industrial cameras with extra reflective near-infrared lights. The veins are then segmented by a multiple-feature clustering method. Vein structures captured by the two cameras are matched and reconstructed based on the epipolar constraint and homographic property. The skin surface is reconstructed by active structured light with spatial encoding values and fusion displayed with the reconstructed vein. The vein and skin surface are both reconstructed in the 3D space. Results show that the structures can be precisely back-projected to the back of the hand for further augmented display and visualization. The overall system performance is evaluated in terms of vein segmentation, accuracy of vein matching, feature points distance error, duration times, accuracy of skin reconstruction, and augmented display. All experiments are validated with sets of real vein data. The imaging and augmented system produces good imaging and augmented reality results with high speed. PMID:27446690

  18. Dorsal Augmentation in Rhinoplasty: A Survey and Review.

    Science.gov (United States)

    Malone, Melanie; Pearlman, Steven

    2015-06-01

    Understanding the nuanced practices and grafting options of dorsal augmentation will improve outcomes and results in rhinoplasty. To better understand the practices of dorsal augmentation among our colleagues. To review the current literature regarding the indications, safety profiles, and outcomes of different materials used in dorsal augmentation. A PubMed search was performed to capture current articles containing reviews or large series regarding the safety and efficacy of various grafting materials used for dorsal augmentation. Of the many options available, autologous cartilage grafts maintain widespread use for dorsal augmentation and other techniques in rhinoplasty. Homologous cartilage grafts, namely irradiated rib, are a preferred alternative. Irradiated costal cartilage has been shown to have low complication rates and is unique in its abundance of supply, particularly in the revision rhinoplasty. Alloplastic implants, particularly silicone, are prevalent in Asian countries where they are a popular first-line choice. ePTFE has a favorable complication profile in primary rhinoplasty; however, caution is recommended when using ePTFE in revision cases. Porous polyethylene has a higher risk of associated complications than the other alloplastic implants listed, and therefore should be considered thoughtfully. Although cartilage is often the preferred graft for dorsal augmentation, there are many other autogenous, homologous, and alloplastic materials that have been shown to be safe and effective choices when applied in the proper setting. PMID:26126225

  19. Synthesis and Biological Evaluation of New (-)-Englerin Analogues.

    Science.gov (United States)

    López-Suárez, Laura; Riesgo, Lorena; Bravo, Fernando; Ransom, Tanya T; Beutler, John A; Echavarren, Antonio M

    2016-05-01

    We report the synthesis and biological evaluation of a series of (-)-englerin A analogues obtained along our previously reported synthetic route based on a stereoselective gold(I) cycloaddition process. This synthetic route is a convenient platform to access analogues with broad structural diversity and has led us to the discovery of unprecedented and easier-to-synthesize derivatives with an unsaturation in the cyclopentyl ring between C4 and C5. We also introduce novel analogues in which the original isopropyl motif has been substituted with cyclohexyl, phenyl, and cyclopropyl moieties. The high selectivity and growth-inhibitory activity shown by these new derivatives in renal cancer cell lines opens new ways toward the final goal of finding effective drugs for the treatment of renal cell carcinoma (RCC).

  20. Conception, synthesis, and biological evaluation of original discodermolide analogues.

    Science.gov (United States)

    de Lemos, Elsa; Agouridas, Evangelos; Sorin, Geoffroy; Guerreiro, Antonio; Commerçon, Alain; Pancrazi, Ange; Betzer, Jean-François; Lannou, Marie-Isabelle; Ardisson, Janick

    2011-08-29

    Due to its intriguing biological activity profile and potential chemotherapeutic application discodermolide (DDM) proved to be an attractive target. Therefore, notable efforts have been carried out directed toward its total synthesis and toward the production and evaluation of synthetic analogues. Recently, we achieved the total synthesis of DDM. At the present, guided by the knowledge gained during our DDM total synthesis and by the requirement of keeping the bioactive "U" shape conformation, we report the convergent preparation of five original analogues. Three types of changes were realized through modification of the terminal (Z)-diene moiety, of the methyl group at the C14-position, and the lactone region. All analogues were active in the nanomolar range and two of them turned out to be equipotent to DDM.

  1. Synthesis and cytotoxic activity of novel curcumin analogues

    Institute of Scientific and Technical Information of China (English)

    Qin Zhang; Yao Fu; Hao Wei Wang; Tao Gong; Yong Qin; Zhi Rong Zhang

    2008-01-01

    Five novel curcumin analogues bearing different substituents at 4-position of phenyl group were synthesized. Their structures were confirmed by NMR and HRMS spectrum. Their cytotoxic activities against six tumor cell lines were tested by the standard MTT assay in vitro. The results indicated that four analogues (1A-1C, 1E) with solubilizing moieties showed selective potent cytotoxicity against HepG2, HeLa and CT26 cell lines, and analogue 1A and 1C exhibited more potent cytotoxicity than curcumin against CT26 cell line. It was suggested that introduction of appropriate substituents to 4-position of phenyl group might be a potential option for structural modification of curcumin.

  2. Synthesis and cytotoxic activities of semisynthetic zearalenone analogues.

    Science.gov (United States)

    Tadpetch, Kwanruthai; Kaewmee, Benyapa; Chantakaew, Kittisak; Kantee, Kawalee; Rukachaisirikul, Vatcharin; Phongpaichit, Souwalak

    2016-08-01

    Zearalenone is a β-resorcylic acid macrolide with various biological activities. Herein we report the synthesis and cytotoxic activities of 34 zearalenone analogues against human oral epidermoid carcinoma (KB) and human breast adenocarcinoma (MCF-7) cells as well as noncancerous Vero cells. Some zearalenone analogues showed moderately enhanced cytotoxic activities against the two cancer cell lines. We have discovered the potential lead compounds with diminished or no cytotoxicity to Vero cells. Preliminary structure-activity relationship studies revealed that the double bond at the 1' and 2' positions of zearalenone core was crucial for cytotoxic activities on both cell lines. In addition, for zearalenol analogues, the unprotected hydroxyl group at C-2 and an alkoxy substituent at C-4 played key roles on cytotoxic effects of both cell lines.

  3. Ensemble meteorological reconstruction using circulation analogues of 1781–1785

    Directory of Open Access Journals (Sweden)

    P. Yiou

    2013-09-01

    Full Text Available This paper uses a method of atmospheric flow analogues to reconstruct an ensemble of atmospheric variables (namely sea-level pressure, surface temperature and wind speed between 1781 and 1785. The properties of this ensemble are investigated and tested against observations of temperature. The goal of the paper is to assess whether the atmospheric circulation during the Laki volcanic eruption (in 1783 and the subsequent winter were similar to the conditions that prevailed in the winter 2009/2010 and during spring 2010. We find that the three months following the Laki eruption in June 1783 barely have analogues in 2010. The cold winter of 1783/1784 yields circulation analogues in 2009/2010. Our analysis suggests that it is unlikely that the Laki eruption was responsible for the cold winter of 1783/1784, of the relatively short memory of the atmospheric circulation.

  4. Controlled analogue experiments on propagation of seismic electromagnetic signals

    Institute of Scientific and Technical Information of China (English)

    HUANG Qinghua

    2005-01-01

    This study presented a method of laboratory analogue experiments based on a geographical scaling model and a waveguide model to investigate the characteristics of the propagation of seismic electromagnetic signals in the crust and the atmosphere. Some controlled experiments were done to evaluate the possible influence on the experimental results from the background electromagnetic field, geographical conditions, boundary effects, the source of electromagnetic signals (position, magnitude, and frequency), and media conductivity. The reliability and the extensibility of the above analogue experimental method were also investigated. This study indicated that such kind of analogue experimental method provided an intuitionistic way of studying the propagation of seismic electromagnetic signals, which is one of the most difficult research topics in seismo-electro- magnetism.

  5. Analogue modelling of syntectonic leucosomes in migmatitic schists

    Science.gov (United States)

    Druguet, Elena; Carreras, Jordi

    2006-10-01

    Migmatites from the Cap de Creus tectonometamorphic belt display a wide variety of structures, from those formed when the leucosomes were melt-bearing, to those developed during solid-state deformation. The observed field structures have been modelled by means of analogue experiments. The materials used in the models are layered plasticine as a schist analogue, and chocolate as analogue of the crystallizing leucosome. A model for the development of syntectonic migmatites is proposed in which initial melt-bearing patches, preferentially formed within fertile pelitic layers, progressively evolve towards lens-shaped veins. Furthermore, heterogeneous deformation of anisotropic metasediments facilitates formation of extensional sites for further melt accumulation and transport. Melt crystallization implies a rapid increase in effective viscosity of leucosomes producing a reversal in competence contrast with respect to the enclosing schists. During the whole process, deformation localizes around crystallizing veins, giving rise to different and contrasting structures for melt-bearing and for solid-state stages.

  6. Augmented reality for biomedical wellness sensor systems

    Science.gov (United States)

    Jenkins, Jeffrey; Szu, Harold

    2013-05-01

    Due to the commercial move and gaming industries, Augmented Reality (AR) technology has matured. By definition of AR, both artificial and real humans can be simultaneously present and realistically interact among one another. With the help of physics and physiology, we can build in the AR tool together with real human day-night webcam inputs through a simple interaction of heat transfer -getting hot, action and reaction -walking or falling, as well as the physiology -sweating due to activity. Knowing the person age, weight and 3D coordinates of joints in the body, we deduce the force, the torque, and the energy expenditure during real human movements and apply to an AR human model. We wish to support the physics-physiology AR version, PPAR, as a BMW surveillance tool for senior home alone (SHA). The functionality is to record senior walking and hand movements inside a home environment. Besides the fringe benefit of enabling more visits from grand children through AR video games, the PP-AR surveillance tool may serve as a means to screen patients in the home for potential falls at points around in house. Moreover, we anticipate PP-AR may help analyze the behavior history of SHA, e.g. enhancing the Smartphone SHA Ubiquitous Care Program, by discovering early symptoms of candidate Alzheimer-like midnight excursions, or Parkinson-like trembling motion for when performing challenging muscular joint movements. Using a set of coordinates corresponding to a set of 3D positions representing human joint locations, we compute the Kinetic Energy (KE) generated by each body segment over time. The Work is then calculated, and converted into calories. Using common graphics rendering pipelines, one could invoke AR technology to provide more information about patients to caretakers. Alerts to caretakers can be prompted by a patient's departure from their personal baseline, and the patient's time ordered joint information can be loaded to a graphics viewer allowing for high

  7. Cement leakage in pedicle screw augmentation: a prospective analysis of 98 patients and 474 augmented pedicle screws.

    Science.gov (United States)

    Mueller, Jan U; Baldauf, Joerg; Marx, Sascha; Kirsch, Michael; Schroeder, Henry W S; Pillich, Dirk T

    2016-07-01

    OBJECTIVE Loosening and pullout of pedicle screws are well-known problems in pedicle screw fixation surgery. Augmentation of pedicle screws with bone cement, first described as early as 1975, increases the pedicle-screw interface and pullout force in osteoporotic vertebrae. The aim of the present study was to identify cement leakage and pulmonary embolism rates in a large prospective single-center series of pedicle screw augmentations. METHODS All patients who underwent cement-augmented pedicle screw placement between May 2006 and October 2010 at the authors' institution were included in this prospective cohort study. Perivertebral cement leakage and pulmonary cement embolism were evaluated with a CT scan of the area of operation and with a radiograph of the chest, respectively. RESULTS A total of 98 patients underwent placement of cement-augmented pedicle screws; 474 augmented screws were inserted in 237 vertebrae. No symptomatic perivertebral cement leakage or symptomatic pulmonary cement embolism was observed, but asymptomatic perivertebral cement leakage was seen in 88 patients (93.6%) and in 165 augmented vertebrae (73.3%). Cement leakage most often occurred in the perivertebral venous system. Clinically asymptomatic pulmonary cement embolism was found in 4 patients (4.1%). CONCLUSIONS Perivertebral cement leakage often occurs in pedicle screw augmentation, but in most cases, it is clinically asymptomatic. Cement augmentation should be performed under continuous fluoroscopy to avoid high-volume leakage. Alternative strategies, such as use of expandable screws, should be examined in more detail for patients at high risk of screw loosening. PMID:26943258

  8. A synthetic analogue of melittin aggregates in large oligomers.

    OpenAIRE

    John, E.; Jähnig, F

    1992-01-01

    An analogue of melittin synthesized in the group of E. T. Kaiser (DeGrado, W. F., F. J. Keźdy, and E. T. Kaiser. 1981. J. Am. Chem. Soc. 103:679-681) was investigated by Raman spectroscopy and fluorescence anisotropy decay. In water, the analogue is completely alpha-helical and aggregates in large oligomers of about 50 monomers. In vesicle membranes, it undergoes orientational fluctuations similar to melittin. The most significant difference from melittin, therefore, is the formation of strai...

  9. Naturally occurring crystalline phases: analogues for radioactive waste forms

    Energy Technology Data Exchange (ETDEWEB)

    Haaker, R.F.; Ewing, R.C.

    1981-01-01

    Naturally occurring mineral analogues to crystalline phases that are constituents of crystalline radioactive waste forms provide a basis for comparison by which the long-term stability of these phases may be estimated. The crystal structures and the crystal chemistry of the following natural analogues are presented: baddeleyite, hematite, nepheline; pollucite, scheelite;sodalite, spinel, apatite, monazite, uraninite, hollandite-priderite, perovskite, and zirconolite. For each phase in geochemistry, occurrence, alteration and radiation effects are described. A selected bibliography for each phase is included.

  10. Naturally occurring crystalline phases: analogues for radioactive waste forms

    International Nuclear Information System (INIS)

    Naturally occurring mineral analogues to crystalline phases that are constituents of crystalline radioactive waste forms provide a basis for comparison by which the long-term stability of these phases may be estimated. The crystal structures and the crystal chemistry of the following natural analogues are presented: baddeleyite, hematite, nepheline; pollucite, scheelite;sodalite, spinel, apatite, monazite, uraninite, hollandite-priderite, perovskite, and zirconolite. For each phase in geochemistry, occurrence, alteration and radiation effects are described. A selected bibliography for each phase is included

  11. Design of a saturated analogue and digital current transducer

    International Nuclear Information System (INIS)

    This project describes the development of a new analogue and digital current transducer, providing a range of new theoretical design methods for these novel devices. The main control feature is the limit cycling operation, and the novel use of the embedded sigma-delta modulator sensor structure to derive a low component count digital sensor. The research programme was initiated into the design, development and evaluation of a novel non-Hall sensing analogue and digital current transducer. These transducers are used for measurement of high currents in power systems applications. The investigation is concerned with a new design which uses a magnetic ferrite core without an air gap for current measurement. The motivation for this work was to design a new control circuit which provides a low component count, and utilises the non-linear properties of the magnetic ferrite core to transmit direct current. The use of a limit cycle control circuit was believed to be particularly suitable for the analogue and digital transducers, for two main reasons: the low component count, and the output signal is directly digital. In line with the motivations outlined above, the outcome of the research has witnessed the design, development and evaluation of a practically realisable analogue and digital current transducer. The design procedure, which is documented in this thesis, is considered to be a major contribution to the field of transducers design and development using a control systems approach. Mathematical models for both analogue and digital transducers were developed and the resulting model based predictions were found to be in good agreement with measured results. Simplification of the new model sensing device was achieved by approximating the non-linear ferrite core using FFT analysis. This is also considered to be a significant contribution. The development analogue and digital current censors employed a sampled data control systems design and utilised limit cycling

  12. Five new discodermolide analogues from the marine sponge Discodermia species.

    Science.gov (United States)

    Gunasekera, Sarath P; Paul, Gopal K; Longley, Ross E; Isbrucker, Richard A; Pomponi, Shirley A

    2002-11-01

    Discodermolide (1) and five new discodermolide analogues trivially named 2-epi-discodermolide (2), 2-des-methyldiscodermolide (3), 5-hydroxymethyldiscodermolate (4), 19-des-aminocarbonyldiscodermolide (5), and 9(13)-cyclodiscodermolide (6) have been isolated from marine sponges belonging to the genus Discodermia collected from the Caribbean Sea. The isolation, structure elucidation, and biological activities of 2-6 are described. The natural analogues, which were isolated in trace amounts, exhibited significant variation of cytotoxicity against the cultured murine P-388 leukemia and A-549 human adenocarcinoma cells and suggested the importance of the C(7) through C(17) moiety for potency against cultured tumor cell lines.

  13. Synthesis of Conformationally Locked Versions of Puromycin Analogues

    Science.gov (United States)

    Saneyoshi, Hisao; Michel, Benoît Y.; Choi, Yongseok; Strazewski, Peter; Marquez, Victor E.

    2009-01-01

    Conformationally locked North and South versions of puromycin analogues built on a bicyclo[3.1.0]hexane pseudosugar template were synthesized. The final assembly of the products was accomplished by the Staudinger-Vilarrasa coupling of the corresponding North (2 and 3) and South (6 and 7) 3′-azidopurine carbanucleosides with the Fmoc-protected 1-hydroxybenzotriazole ester of 4-methoxy-L-tyrosine. North azides 2 and 3 were reported earlier. The 3′-azido intermediates 6 and 7 that are necessary for the synthesis of the South puromycin analogues are described herein for the first time. PMID:18991379

  14. Analogue Kerr-like geometries in a MHD inflow

    CERN Document Server

    Noda, Sousuke; Takahashi, Masaaki

    2016-01-01

    We present a model of the analogue black hole in magnetohydrodynamic (MHD) flow. For a two dimensional axisymmetric stationary trans-magnetosonic inflow with a sink, using the dispersion relation of the MHD waves, we introduce the effective geometries for magnetoacoustic waves propagating in the MHD flow. Investigating the properties of the effective potentials for magnetoacoustic rays, we find that the effective geometries can be classified into five types which include analogue spacetimes of the Kerr black hole, ultra spinning stars with ergoregions and spinning stars without ergoregions. We address the effects of the magnetic pressure and the magnetic tension on each magnetoacoustic geometries.

  15. Improving target detection in visual search through the augmenting multi-sensory cues

    NARCIS (Netherlands)

    Hancock, P.A.; Mercado, J.E.; Merlo, J.; Erp, J.B.F. van

    2013-01-01

    The present experiment tested 60 individuals on a multiple screen, visual target detection task. Using a within-participant design, individuals received no-cue augmentation, an augmenting tactile cue alone, an augmenting auditory cue alone or both of the latter augmentations in combination. Results

  16. STAR: Speech Therapy with Augmented Reality for children with autism spectrum disorders

    OpenAIRE

    Silva,Camilla Almeida da; Fernandes, António Ramires; Grohmann, Ana Paula

    2015-01-01

    Graphics based systems of Augmented and Alternative Communication are widely used to promote communication in people with Autism Spectrum Disorders. This study discusses an integration of Augmented Reality in communication interventions, by relating elements of Augmented and Alternative Communication and Applied Behaviour Analysis strategies. An architecture for an Augmented Reality based interactive system to assist interventions is proposed. STAR provides an Augmented Reality tool to assi...

  17. Gunner Goggles: Implementing Augmented Reality into Medical Education.

    Science.gov (United States)

    Wang, Leo L; Wu, Hao-Hua; Bilici, Nadir; Tenney-Soeiro, Rebecca

    2016-01-01

    There is evidence that both smartphone and tablet integration into medical education has been lacking. At the same time, there is a niche for augmented reality (AR) to improve this process through the enhancement of textbook learning. Gunner Goggles is an attempt to enhance textbook learning in shelf exam preparatory review with augmented reality. Here we describe our initial prototype and detail the process by which augmented reality was implemented into our textbook through Layar. We describe the unique functionalities of our textbook pages upon augmented reality implementation, which includes links, videos and 3D figures, and surveyed 24 third year medical students for their impression of the technology. Upon demonstrating an initial prototype textbook chapter, 100% (24/24) of students felt that augmented reality improved the quality of our textbook chapter as a learning tool. Of these students, 92% (22/24) agreed that their shelf exam review was inadequate and 19/24 (79%) felt that a completed Gunner Goggles product would have been a viable alternative to their shelf exam review. Thus, while students report interest in the integration of AR into medical education test prep, future investigation into how the use of AR can improve performance on exams is warranted.

  18. Gunner Goggles: Implementing Augmented Reality into Medical Education.

    Science.gov (United States)

    Wang, Leo L; Wu, Hao-Hua; Bilici, Nadir; Tenney-Soeiro, Rebecca

    2016-01-01

    There is evidence that both smartphone and tablet integration into medical education has been lacking. At the same time, there is a niche for augmented reality (AR) to improve this process through the enhancement of textbook learning. Gunner Goggles is an attempt to enhance textbook learning in shelf exam preparatory review with augmented reality. Here we describe our initial prototype and detail the process by which augmented reality was implemented into our textbook through Layar. We describe the unique functionalities of our textbook pages upon augmented reality implementation, which includes links, videos and 3D figures, and surveyed 24 third year medical students for their impression of the technology. Upon demonstrating an initial prototype textbook chapter, 100% (24/24) of students felt that augmented reality improved the quality of our textbook chapter as a learning tool. Of these students, 92% (22/24) agreed that their shelf exam review was inadequate and 19/24 (79%) felt that a completed Gunner Goggles product would have been a viable alternative to their shelf exam review. Thus, while students report interest in the integration of AR into medical education test prep, future investigation into how the use of AR can improve performance on exams is warranted. PMID:27046620

  19. Composite augmentation phalloplasty: personal experience after 275 patients

    Directory of Open Access Journals (Sweden)

    Juan Monreal

    2015-03-01

    Full Text Available Aim: To report the author's experience in augmentation phalloplasty by studying a retrospective series of patients who underwent fat grafting for girth enhancement or a composite technique based on suspensory ligament release plus fat grafting performed simultaneously. Methods: The author analyzed retrospectively the outcomes of 275 augmentation phalloplasty procedures performed in 259 patients until November 2013. Of these, 127 correspond to girth augmentation with fat grafting and 148 to composite augmentation phalloplasty (girth augmentation with fat grafting and length improvement by suspensory ligament release. In 16 patients girth and length enhancement were performed in two separate procedures. Results: Of this 259 patients, 87 underwent postoperative follow-up for at least 12 months and 160 patients underwent follow-up for at least 6 months. The average increase in circumference at 6 months was 1.7 cm (1.57 cm at 12 months and the average increase in length of 3.2 cm (3.1 cm at 12 months. Twenty-two patients showed minor complications that were treated without sequelae and without influencing the final result. Conclusion: By judicious use of currently available techniques, it is possible to achieve stable increases in penis size. The use of composite techniques provides better final results than the use of individual techniques performed alone due to the increase of the actual volume of the penis. An adequate informed consent is essential in all patients due to the unrealistic expectations expressed by the majority of them.

  20. Aromaticity in Polyacene Analogues of Inorganic Ring Compounds

    CERN Document Server

    Chattaraj, P K; Chattaraj, Pratim Kumar; Roy, Debesh Ranjan

    2006-01-01

    The aromaticity in the polyacene analogues of several inorganic ring compounds (BN-acenes, CN-acenes, BO-acenes and Na6-acenes) is reported here for the first time. Conceptual density functional theory based reactivity descriptors and the nucleus independent chemical shift (NICS) values are used in this analysis.

  1. Cellular Cations Control Conformational Switching of Inositol Pyrophosphate Analogues.

    Science.gov (United States)

    Hager, Anastasia; Wu, Mingxuan; Wang, Huanchen; Brown, Nathaniel W; Shears, Stephen B; Veiga, Nicolás; Fiedler, Dorothea

    2016-08-22

    The inositol pyrophosphate messengers (PP-InsPs) are emerging as an important class of cellular regulators. These molecules have been linked to numerous biological processes, including insulin secretion and cancer cell migration, but how they trigger such a wide range of cellular responses has remained unanswered in many cases. Here, we show that the PP-InsPs exhibit complex speciation behaviour and propose that a unique conformational switching mechanism could contribute to their multifunctional effects. We synthesised non-hydrolysable bisphosphonate analogues and crystallised the analogues in complex with mammalian PPIP5K2 kinase. Subsequently, the bisphosphonate analogues were used to investigate the protonation sequence, metal-coordination properties, and conformation in solution. Remarkably, the presence of potassium and magnesium ions enabled the analogues to adopt two different conformations near physiological pH. Understanding how the intrinsic chemical properties of the PP-InsPs can contribute to their complex signalling outputs will be essential to elucidate their regulatory functions. PMID:27460418

  2. Cytotoxicity of natural ginseng glycosides and semisynthetic analogues

    NARCIS (Netherlands)

    Atopkina, LN; Malinovskaya, GV; Elyakov, GB; Uvarova, NI; Woerdenbag, HJ; Koulman, A; Potier, P

    1999-01-01

    The cytotoxicity of natural glycosides from Ginseng, semisynthetic analogues and related triterpenes of the dammarane series, isolated from the leaves of the Far-East species of the genus Betula was studied in order to elucidate structure-activity relationships. Some of the compounds studied were ac

  3. An Electric Analogue to Gravity Induced Vacuum Dominance

    CERN Document Server

    Oikonomou, V K

    2013-01-01

    It is shown that when a strong electric field is turned on as a background in a charged scalar field, the vacuum state of the scalar field becomes exponentially amplified. This is an analogue to gravity induced vacuum amplification, where the vacuum state becomes exponentially amplified for some geometries.

  4. Evaluation of the antibacterial spectrum of drosocin analogues

    NARCIS (Netherlands)

    Bikker, F.J.; Kaman-van Zanten, W.E.; Vries-van de Ruit, A.M.B.C. de; Voskamp-Visser, I.; Hooft, P.A.V. van; Mars-Groenendijk, R.H.; Visser, P.C. de; Noort, D.

    2006-01-01

    Drosocin is a 19-mer, cationic antimicrobial peptide from Drosophila melanogaster. The aim of the study was to examine the antibacterial spectrum of unglycosylated drosocin analogues. Furthermore, the amino acid sequence of DnaK, drosocin's intracellular target, from susceptible species was aligned

  5. Design and Synthesis of Muramyl Dipeptide Cyclic Analogue

    Institute of Scientific and Technical Information of China (English)

    SuoDeZHANG; GangLIU; 等

    2002-01-01

    A new conformationalloy restricted cyclic analogue of muramyl dipeptide was designed and manually synthesized by our “Meshed-Bag Gathered-Bunch” method with a combination of Fmoc,ally and N-1-(4,4-dimethyl-2,6-dioxocyclo-hexylidene) ethyl chemical protection strategy.

  6. Synthesis, DNA interaction and antimicrobial activities of three rimantadine analogues

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Bing-Mi; Zhang, Jun [Department of Pharmacy, Liaoning University, Shenyang 110036 (China); Wang, Xin, E-mail: wangxinlnu@163.com [Department of Pharmacy, Liaoning University, Shenyang 110036 (China); Zhang, Li-Ping; Liu, Yang [Department of Pharmacy, Liaoning University, Shenyang 110036 (China); Niu, Hua-Ying [Jinan Dachpharm Development Co., Ltd., Jinan 250100 (China); Liu, Bin, E-mail: liubinzehao@163.com [Department of Pharmacy, Liaoning University, Shenyang 110036 (China)

    2015-03-15

    The interactions of three rimantadine analogues (RAs) with calf thymus deoxyribonucleic acid (ct-DNA) in buffer solution (pH 7.4) were investigated using berberine (BR) as a probe by various methods. Fluorescence studies revealed that the RAs interacted with DNA in vitro and the quenchings were all static. Furthermore, the binding modes of these compounds to DNA were disclosed as groove binding supported by absorption spectroscopy, viscosity measurement and denatured DNA experiment. The antimicrobial activities of the RAs were also evaluated in Staphylococcus aureus and Escherichia coli, and they all exhibited good bacteriostasic effects. The results might provide an important reference for investigation of the molecular mechanism associated with the DNA binding of the RAs. - Highlights: • Three rimantadine analogues were synthesized. • The RAs effectively quenched the intrinsic fluorescence of DNA via a static combination. • These analogues can bind to DNA via groove binding mode. • The antimicrobial activities of three analogues were also evaluated by the disk diffusion method.

  7. Block-level Bayesian diagnosis of analogue electronic circuits

    NARCIS (Netherlands)

    Krishnan, S.; Doornbos, K.D.; Brand, R.; Kerkhoff, H.G.

    2010-01-01

    Daily experience with product designers, test and diagnosis engineers it is realized that the depth of interaction among them, ought be high for sucessfull diagnosis of analogue circuits. With this knowledge in mind, a responsibility was undertaken to choose a popular diagnostic method and define a

  8. New phosphorus analogues of nitrogen classics--no carbon copies.

    Science.gov (United States)

    Gudat, Dietrich

    2014-05-01

    Getting heavy: The recently prepared phosphorus analogues of two old acquaintances, urea and dinitrogen tetroxide, bear some structural resemblance to their archetypes but are no carbon copies. Their syntheses and chemical properties reveal rather certain peculiarities, which back the doctrine that the electronic properties of the heavier elements in a group differ from those of the lightest congener. PMID:24718995

  9. Nucleic Acid Analogue Induced Transcription of Double Stranded DNA

    DEFF Research Database (Denmark)

    1998-01-01

    RNA is transcribed from a double stranded DNA template by forming a complex by hybridizing to the template at a desired transcription initiation site one or more oligonucleic acid analogues of the PNA type capable of forming a transcription initiation site with the DNA and exposing the complex to...... displacement of one strand of the DNA locally by the PNA hybridization....

  10. An Analysis of an Autoclitic Analogue in Pigeons

    Science.gov (United States)

    Kuroda, Toshikazu; Lattal, Kennon A.; García-Penagos, Andrés

    2014-01-01

    Using a conditional discrimination procedure, pigeons were exposed to a nonverbal analogue of qualifying autoclitics such as "definitely" and "maybe." It has been suggested that these autoclitics are similar to tacts except that they are under the control of private discriminative stimuli. Instead of the conventional assumption…

  11. Cognitive mechanisms and posttraumatic stress disorder: Clinical and analogue research.

    NARCIS (Netherlands)

    I.M. Engelhard; M. Kindt

    2005-01-01

    The contributions to this special issue "Journal of Behavior Therapy & Experimental Psychiatry," are driven by influential cognitive theories of Posttraumatic stress disorder (PTSD). They include clinical and analogue research and address different aspects of PTSD. Two papers focus on the clarificat

  12. Combinatorial Solid-Phase Synthesis of Balanol Analogues

    DEFF Research Database (Denmark)

    Nielsen, John; Lyngsø, Lars Ole

    1996-01-01

    The natural product balanol has served as a template for the design and synthesis of a combinatorial library using solid-phase chemistry. Using a retrosynthetic analysis, the structural analogues have been assembled from three relatively accessible building blocks. The solid-phase chemistry inclu...

  13. Combined treatment of somatostatin analogues with pegvisomant in acromegaly

    NARCIS (Netherlands)

    S.E. Franck; A. Muhammad; A-J. van der Lely (Aart-Jan); S.J.C.M.M. Neggers (Bas)

    2016-01-01

    textabstractTreatment of acromegaly with monotherapy long-acting somatostatin analogues (LA-SSA) as primary treatment or after neurosurgery can only achieve complete normalization of insulin-like growth factor I (IGF-I) in roughly 40 % of patients. Recently, one of the acromegaly consensus groups ha

  14. Concise synthesis of new bridged-nicotine analogues

    DEFF Research Database (Denmark)

    Crestey, François; Hooyberghs, Geert; Kristensen, Jesper Langgaard

    2012-01-01

    This study describes a very efficient strategy for the synthesis of two new bridged-nicotine analogues. Starting from either 4- or 3-chloropyridine the desired tricyclic ring systems are accessed in just three steps in 23% and 40% overall yield, respectively....

  15. Synthesis and biological evaluation of novel gramicidin s analogues

    NARCIS (Netherlands)

    Tuin, A.W.; Palachanis, D.K.; Buizert, A.; Grotenbreg, G.M.; Spalburg, E.; Neeling, A.J. de; Mars-Groenendijk, R.H.; Noort, D.; Marel, G.A. van der; Overkleeft, H.S.; Overhand, M.

    2009-01-01

    The synthesis of three new analogues of the cyclic cationic antimicrobial peptide Gramicidin S is described. These derivatives contain a modified turn region in which the DPhe-Pro motif has been replaced by a constrained furanoid sugar amino acid or a flexible linear aminoethoxy acetic acid moiety.

  16. Analogue Building Blocks Based on Digital CMOS Gates

    DEFF Research Database (Denmark)

    Mucha, Igor

    1996-01-01

    Low-performance analogue circuits built of digital MOS gates are presented. Depending on the threshold voltages of the technology used the final circuits can be operated using low supply voltages. The main advantage using the proposed circuits is the simplicity and ultimate compatibility with the...

  17. Synthesis and Characterization of the Tetrazole Analogues of α-Amino Acids

    Institute of Scientific and Technical Information of China (English)

    Yan Min HUO; Gen Hu LEI; Yin Mao WEI; Xiao Hui ZHENG

    2006-01-01

    The tetrazole analogues have been synthesized from fluorenylmethoxycarbonyl (Fmoc)protected amino acids by three steps. The structures of the analogues were characterized by HPLC-MS, 1H NMR and 13C NMR.

  18. Non-robust numerical simulations of analogue extension experiments

    Science.gov (United States)

    Naliboff, John; Buiter, Susanne

    2016-04-01

    Numerical and analogue models of lithospheric deformation provide significant insight into the tectonic processes that lead to specific structural and geophysical observations. As these two types of models contain distinct assumptions and tradeoffs, investigations drawing conclusions from both can reveal robust links between first-order processes and observations. Recent studies have focused on detailed comparisons between numerical and analogue experiments in both compressional and extensional tectonics, sometimes involving multiple lithospheric deformation codes and analogue setups. While such comparisons often show good agreement on first-order deformation styles, results frequently diverge on second-order structures, such as shear zone dip angles or spacing, and in certain cases even on first-order structures. Here, we present finite-element experiments that are designed to directly reproduce analogue "sandbox" extension experiments at the cm-scale. We use material properties and boundary conditions that are directly taken from analogue experiments and use a Drucker-Prager failure model to simulate shear zone formation in sand. We find that our numerical experiments are highly sensitive to numerous numerical parameters. For example, changes to the numerical resolution, velocity convergence parameters and elemental viscosity averaging commonly produce significant changes in first- and second-order structures accommodating deformation. The sensitivity of the numerical simulations to small parameter changes likely reflects a number of factors, including, but not limited to, high angles of internal friction assigned to sand, complex, unknown interactions between the brittle sand (used as an upper crust equivalent) and viscous silicone (lower crust), highly non-linear strain weakening processes and poor constraints on the cohesion of sand. Our numerical-analogue comparison is hampered by (a) an incomplete knowledge of the fine details of sand failure and sand

  19. Sulphamoylated 2-methoxyestradiol analogues induce apoptosis in adenocarcinoma cell lines.

    Directory of Open Access Journals (Sweden)

    Michelle Visagie

    Full Text Available 2-Methoxyestradiol (2ME2 is a naturally occurring estradiol metabolite which possesses antiproliferative, antiangiogenic and antitumor properties. However, due to its limited biological accessibility, synthetic analogues have been synthesized and tested in attempt to develop drugs with improved oral bioavailability and efficacy. The aim of this study was to evaluate the antiproliferative effects of three novel in silico-designed sulphamoylated 2ME2 analogues on the HeLa cervical adenocarcinoma cell line and estrogen receptor-negative breast adenocarcinoma MDA-MB-231 cells. A dose-dependent study (0.1-25 μM was conducted with an exposure time of 24 hours. Results obtained from crystal violet staining indicated that 0.5 μM of all 3 compounds reduced the number of cells to 50%. Lactate dehydrogenase assay was used to assess cytotoxicity, while the mitotracker mitochondrial assay and caspase-6 and -8 activity assays were used to investigate the possible occurrence of apoptosis. Tubulin polymerization assays were conducted to evaluate the influence of these sulphamoylated 2ME2 analogues on tubulin dynamics. Double immunofluorescence microscopy using labeled antibodies specific to tyrosinate and detyrosinated tubulin was conducted to assess the effect of the 2ME2 analogues on tubulin dynamics. An insignificant increase in the level of lactate dehydrogenase release was observed in the compounds-treated cells. These sulphamoylated compounds caused a reduction in mitochondrial membrane potential, cytochrome c release and caspase 3 activation indicating apoptosis induction by means of the intrinsic pathway in HeLa and MDA-MB-231 cells. Microtubule depolymerization was observed after exposure to these three sulphamoylated analogues.

  20. Analogue Electrical Circuit for Simulation of the Duffing-Holmes Equation

    DEFF Research Database (Denmark)

    Tamaseviciute, E.; Tamasevicius, A.; Mykolaitis, G.;

    2008-01-01

    An extremely simple second order analogue electrical circuit for simulating the two-well Duffing-Holmes mathematical oscillator is described. Numerical results and analogue electrical simulations are illustrated with the snapshots of chaotic waveforms, phase portraits (Lissajous figures) and stro......An extremely simple second order analogue electrical circuit for simulating the two-well Duffing-Holmes mathematical oscillator is described. Numerical results and analogue electrical simulations are illustrated with the snapshots of chaotic waveforms, phase portraits (Lissajous figures...

  1. Evaluation of the incremental cost to the National Health Service of prescribing analogue insulin

    OpenAIRE

    Sarah E Holden; Poole, Chris D; Morgan, Christopher Ll.; Currie, Craig J

    2011-01-01

    Article summary Article focus Insulin analogues have become increasingly popular in recent years. Insulin analogues are more costly than their human insulin alternatives. The aim of this cross-sectional study is to calculate the incremental cost to the National Health Service (NHS) of prescribing analogue insulin preparations instead of their human insulin alternatives. Key messages If all dispensations for analogue insulin between 2000 and 2009 had used a human insulin alternative, the NHS w...

  2. Visualization Cardiac Human Anatomy using Augmented Reality Mobile Application

    Directory of Open Access Journals (Sweden)

    Al Hamidy Hazidar

    2014-05-01

    Full Text Available Augmented Reality (AR is currently widely researched and rapidly evolving. This technology supplements the real world with composite 3D virtual objects that are integrated into the real world. This technology is very interesting and interactive. Augmented reality and Smartphone used as well as the interactive media and rarely used as a medium for the introduction of the human bodies. The aim of Cardiac Learning Detection (CLD assists students in the medical field in understanding the concepts of learning materials presented interactively by the system, especially cardiac anatomy human bodies and is able to provide more information than delivered through conventional teaching methods. For this reason, in this research were made augmented reality on visual technique as a medium to introduce the cardiac anatomy human

  3. Augmented reality three-dimensional display with light field fusion.

    Science.gov (United States)

    Xie, Songlin; Wang, Peng; Sang, Xinzhu; Li, Chengyu

    2016-05-30

    A video see-through augmented reality three-dimensional display method is presented. The system that is used for dense viewpoint augmented reality presentation fuses the light fields of the real scene and the virtual model naturally. Inherently benefiting from the rich information of the light field, depth sense and occlusion can be handled under no priori depth information of the real scene. A series of processes are proposed to optimize the augmented reality performance. Experimental results show that the reconstructed fused 3D light field on the autostereoscopic display is well presented. The virtual model is naturally integrated into the real scene with a consistence between binocular parallax and monocular depth cues. PMID:27410076

  4. Marker-Based Embodied Interaction for Handheld Augmented Reality Games

    Directory of Open Access Journals (Sweden)

    Michael Rohs

    2007-05-01

    Full Text Available This article deals with embodied user interfaces for handheld augmented reality games, which consist of both physical and virtual components. We have developed a number of spatial interaction techniques that optically capture the device’s movement and orientation relative to a visual marker. Such physical interactions in 3D space enable manipulative control of mobile games. In addition to acting as a physical controller that recognizes multiple game-dependent gestures, the mobile device augments the camera view with graphical overlays. We describe three game prototypes that use ubiquitous product packaging and other passive media as backgrounds for handheld augmentation. The prototypes can be realized on widely available off-the-shelf hardware and require only minimal setup and infrastructure support.

  5. Temporal suppression and augmentation of click-evoked otoacoustic emissions

    DEFF Research Database (Denmark)

    Verhulst, Sarah; Harte, James; Dau, Torsten

    2008-01-01

    This study investigates and models temporal suppression of click-evoked otoacoustic emissions (CEOAEs). This suppression-effect is created when a suppressor-click is presented close in time to a test-click. The analysis was carried out for short time-frames of short- and long-latency CEOAEs. The...... latter is defined as a CEOAE with duration greater than 20 ms, typically observed for test subjects with spontaneous otoacoustic emissions (SOAEs). Previous studies have tended to exclude these test subjects but they are incorporated here. The results from six exemplary subjects demonstrate that temporal...... temporal suppression and augmentation of CEOAEs. Recently, a feedback automatic gain control (AGC) system has been used to model CEOAE suppression. However, this system cannot account for augmentation and therefore another, dynamic nonlinear model was developed. Suppression and augmentation were modeled...

  6. Virasoro representations and fusion for general augmented minimal models

    Energy Technology Data Exchange (ETDEWEB)

    Eberle, Holger; Flohr, Michael [Physikalisches Institut der Universitaet Bonn, Nussallee 12, 53115 Bonn (Germany)

    2006-12-08

    In this paper, we present explicit results for the fusion of irreducible and higher rank representations in two logarithmically conformal models, the augmented c{sub 2,3} = 0 model as well as the augmented Yang-Lee model at c{sub 2,5} = -22/5. We analyse their spectrum of representations which is consistent with the symmetry and associativity of the fusion algebra. We also describe the first few higher rank representations in detail. In particular, we present the first examples of consistent rank 3 indecomposable representations and describe their embedding structure. Knowing these two generic models we also conjecture the general representation content and fusion rules for general augmented c{sub p,q} models.

  7. [Subantral augmentation with porous titanium in experiment and clinic].

    Science.gov (United States)

    Sirak, S V; Shchetinin, E V; Sletov, A A

    2016-01-01

    The article discusses the use of porous titanium for subantral augmentation. Experimental study was conducted on 12 yearling rams. Subantral augmentation using porous titanium was performed in 33 patients. In the control group consisting of 14 patients calcium phosphates and bone collagen based agents ("Bio-Оss" and "Collost") were used. In the main and control groups 46 and 32 implant were placed, respectively. Pilot histological and clinical studies proved that the granules of porous titanium are biocompatible with bone tissue, provide the optimal surface microrelief, thus creating good conditions for adhesion, expansion and migration of osteoforming cells, have negligible kinetics of resorption, are porous to ensure effective neovascularization of de novo formed bone tissue. Porous titanium is an effective alternative material for subantral bone augmentation for dental implantation and reconstructive operations on the maxillary sinus.

  8. Bibliography on augmentation of convective heat and mass transfer

    Energy Technology Data Exchange (ETDEWEB)

    Bergles, A.E.; Webb, R.L.; Junkhan, G.H.; Jensen, M.K.

    1979-05-01

    Heat transfer augmentation has developed into a major specialty area in heat transfer research and development. A bibliography of world literature on augmentation is presented. The literature is classified into passive augmentation techniques, which require no external power, and active techniques, which do require external power. The fourteen techniques are grouped in terms of their application to the various modes of heat transfer. Mass transfer is included for completeness. Key words are included with each citation for technique/mode identification. The total number of publications cited is 1,967, including 75 surveys of various techniques and 42 papers on performance evaluation of passive techniques. Patents are not included as they will be the subject of a future topical report.

  9. "Messing with the Mind: Evolutionary Challenges to Human Brain Augmentation

    Directory of Open Access Journals (Sweden)

    ARTHUR eSANIOTIS

    2014-09-01

    Full Text Available The issue of brain augmentation has received considerable scientific attention over the last two decades. A key factor to brain augmentation that has been widely overlooked are the complex evolutionary processes which have taken place in evolving the human brain to its current state of functioning. Like other bodily organs, the human brain has been subject to the forces of biological adaptation. The structure and function of the brain, is very complex and only now we are beginning to understand some of the basic concepts of cognition. Therefore, this article proposes that brain-machine interfacing and nootropics are not going to produce augmented brains because we do not understand enough about how evolutionary pressures have informed the neural networks which support human cognitive faculties.

  10. Bibliography on augmentation of convective heat and mass transfer

    International Nuclear Information System (INIS)

    Heat transfer augmentation has developed into a major specialty area in heat transfer research and development. A bibliography of world literature on augmentation is presented. The literature is classified into passive augmentation techniques, which require no external power, and active techniques, which do require external power. The fourteen techniques are grouped in terms of their application to the various modes of heat transfer. Mass transfer is included for completeness. Key words are included with each citation for technique/mode identification. The total number of publications cited is 1,967, including 75 surveys of various techniques and 42 papers on performance evaluation of passive techniques. Patents are not included as they will be the subject of a future topical report

  11. [Subantral augmentation with porous titanium in experiment and clinic].

    Science.gov (United States)

    Sirak, S V; Shchetinin, E V; Sletov, A A

    2016-01-01

    The article discusses the use of porous titanium for subantral augmentation. Experimental study was conducted on 12 yearling rams. Subantral augmentation using porous titanium was performed in 33 patients. In the control group consisting of 14 patients calcium phosphates and bone collagen based agents ("Bio-Оss" and "Collost") were used. In the main and control groups 46 and 32 implant were placed, respectively. Pilot histological and clinical studies proved that the granules of porous titanium are biocompatible with bone tissue, provide the optimal surface microrelief, thus creating good conditions for adhesion, expansion and migration of osteoforming cells, have negligible kinetics of resorption, are porous to ensure effective neovascularization of de novo formed bone tissue. Porous titanium is an effective alternative material for subantral bone augmentation for dental implantation and reconstructive operations on the maxillary sinus. PMID:26925568

  12. Unpower aerocraft augmented state feedback tracking guaranteed cost control

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Aimed at designing the unpower aerocraft attitude control system in a simple and practical way,the guaranteed cost control is adopted.To eliminate the steady-error,a novel tracking control approach-augmented state feedback tracking guaranteed cost control is proposed.Firstly,the unpower aerocraft is modeled as a linear system with norm bounded parameter uncertain,then the linear matrix inequality based state feedback gnaranteed cost control law is combined with the augmented state feedback tracking control from a new point of view.The sufficient condition of the existence of the augmented state feedback tracking guaranteed cost control is derived and converted to the feasible problem of the linear matrix inequality.Finally,the proposed approach is applied to a specified unpower aerocraft.The six dimensions of freedom simulation results show that the proposed approach is effective and feasible.

  13. Fault Diagnosis of Nonlinear Systems Using Structured Augmented State Models

    Institute of Scientific and Technical Information of China (English)

    Jochen Aβfalg; Frank Allg(o)wer

    2007-01-01

    This paper presents an internal model approach for modeling and diagnostic functionality design for nonlinear systems operating subject to single- and multiple-faults. We therefore provide the framework of structured augmented state models. Fault characteristics are considered to be generated by dynamical exosystems that are switched via equality constraints to overcome the augmented state observability limiting the number of diagnosable faults. Based on the proposed model, the fault diagnosis problem is specified as an optimal hybrid augmented state estimation problem. Sub-optimal solutions are motivated and exemplified for the fault diagnosis of the well-known three-tank benchmark. As the considered class of fault diagnosis problems is large, the suggested approach is not only of theoretical interest but also of high practical relevance.

  14. AUGMENTED REALITY BROWSERS: A PROPOSAL FOR ARCHITECTURAL STANDARDIZATION

    Directory of Open Access Journals (Sweden)

    Fernando Sambinelli

    2015-01-01

    Full Text Available The technology evolution of smartphones, systems and the growing of telecommunications, allow the use of Augmented Reality in the exploration of geo-referenced information, complementing the real environment of the users with various types of content displayed on robust mobile cameras through applications called augmented reality browsers. Although this type of application is being in development and growing use by society, the technology, and especially its software architecture do not have any kind of standardization. This work presents concepts about augmented reality browsers for mobile devices. It shows the main aspects and applications of those types of reality. Besides that, the specific features of those types of architecture are discussed and compared, and new architecture, whose most relevant feature is the interoperability of applications in various platforms for mobile devices, are presented. This work has the objective to develop an architectural framework for the development of these browsers.

  15. Integration Of Sensor Orientation Data Into An Augmented Reality Technology

    Directory of Open Access Journals (Sweden)

    Edgaras Artemčiukas

    2014-05-01

    Full Text Available Currently, such microelectromechanical sensors as accelerome­ters, gyroscopes and magnetometers are the dominant sensors in mobile devices. The market of mobile devices is constantly expanding and focused on sensor integration process by adding supplementary functionality for the applications; therefore, it is possible to adapt these sensors for augmented reality technology solutions. Many augmented reality solutions are based on computer vision processing methods in order to identify and track markers or other objects. However, the main problem is chaotic environment, lighting conditions where object recognition and tracking in real-time becomes difficult and sometimes is an impossible process. This paper analyses possibilities to apply microelectromechanical sensors. Additionally, it investigates quaternion use for sensor data to estimate reliable and accurate camera orientation and represent virtual content in augmented reality technology.

  16. Deficiencies in fat-soluble vitamins in long-term users of somatostatin analogue

    NARCIS (Netherlands)

    Fiebrich, H. -B.; van den Berg, G.; Kema, I. P.; Links, T. P.; Kleibeuker, J. H.; van Beek, A. P.; Walenkamp, A. M. E.; Sluiter, W. J.; de Vries, E. G. E.

    2010-01-01

    P>Background Somatostatin analogues are administered to control hormone hypersecretion in acromegaly and carcinoid patients. Somatostatin analogues can increase fat in the stools, which can lead to loss of fat-soluble vitamins. The effect of long-term somatostatin analogue use on vitamin levels rema

  17. On Using Current Steering Logic in Mixed Analogue-digital Circuits

    DEFF Research Database (Denmark)

    Lehmann, Torsten

    1998-01-01

    The authors investigate power supply noise in mixed analogue-digital circuits, arising from communication between the analogue and digital parts of the circuit. Current steering techniques and proper buffering are used to show which noise currents can be reduced and which cannot. In addition, a...... high-swing current steering buffer for driving analogue switches or external digital signals is proposed....

  18. Augmenting amisulpride with clozapine had led to unmasking of akathisia

    Directory of Open Access Journals (Sweden)

    Anirban Ray

    2012-01-01

    Full Text Available Amisulpride is a newer antipsychotic, which is very effective on its own, as well as augmenting other antipsychotic clozapine, which is an effective molecule for treatment resistant schizophrenia. In most cases, amisulpride is added on, in partial responders to clozapine. Here a case is reported where clozapine was added on, in an amisulpride partial responder but this produced side effect and had to be discontinued. The case later responded to clozapine alone. It has been discussed about possible reasons of this finding. It has also been suggested if sequence of introduction of medication is critical regarding getting the desired effect of the augmentation strategy.

  19. Augmented exercise biking with virtual environments for elderly users

    DEFF Research Database (Denmark)

    Bruun-Pedersen, Jon Ram; Pedersen, Kasper Søndergaard; Serafin, Stefania;

    2014-01-01

    Virtual reality (VR) has been shown to function well as an assistive technology to physical therapy for elderly users. Elderly users are a unique user group in this field, due to their characteristics and demands. They are also a user group that can definitely benefit from VR technology, which...... routine. The results showed that a majority of subjects reported to support the VE augmentation and preferred the VE based exercise experience to the conventional exercise. This supports VR as an assisting technology for physical therapy, and suggests the potentiality VE augmented exercises, tailored...

  20. Breast Imaging after Breast Augmentation with Autologous Tissues

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Kyu Won; Seo, Bo Kyung; Shim, Eddeum; Song, Sung Eun; Cho, Kyu Ran [Dept. of Radiology, Korea University Anam Hospital, Seoul (Korea, Republic of); Yoon, Eul Sik [Korea University Ansan Hospital, Ansan (Korea, Republic of); Woo, Ok Hee [Dept. of Radiology, Korea University Guro Hospital, Seoul (Korea, Republic of)

    2012-06-15

    The use of autologous tissue transfer for breast augmentation is an alternative to using foreign implant materials. The benefits of this method are the removal of unwanted fat from other body parts, no risk of implant rupture, and the same feel as real breast tissue. However, sometimes there is a dilemma about whether or not to biopsy for calcifications or masses detected after the procedure is completed. The purpose of this study is to illustrate the procedures of breast augmentation with autologous tissues, the imaging features of various complications, and the role of imaging in the diagnosis and management of complications and hidden breast diseases.