WorldWideScience

Sample records for anaeromyxobacter dehalogenans strain

  1. Towards a More Complete Picture: Dissimilatory Metal Reduction by Anaeromyxobacter Species

    Energy Technology Data Exchange (ETDEWEB)

    Loeffler, Frank E.

    2005-06-01

    Towards a More Complete Picture: Dissimilatory Metal Reduction by Anaeromyxobacter Species The overarching goal of this 3-year project is to explore uranium reduction in Anaeromyxobacter species. Specifically, we explore the physiological requirements of available Anaeromyxobacter isolates, design molecular biology tools to detect and quantify Anaeromyxobacter in pure cultures, consortia, and environmental samples, assess their diversity, distribution, and abundance in the environment, including DOE sites, and attempt the isolation of additional Anaeromyxobacter species from the Oak Ridge Field Research Center (FRC). The performers on this project include Frank Loeffler (PI), Robert Sanford (Co-PI), Qingzhong Wu (postdoc), Sara Henry (graduate student with fellowship, no charges to NABIR project), Ivy Thomson (graduate student, no charges to NABIR project), and Ryan Wagner (''Special Topics'' bioinformatics undergraduate student, no charges to NABIR project). Exploratory MALDI-TOF MS experiments for the specific detection of Anaeromyxobacter species were performed by Kerry Preston (graduate student, no charges to NABIR project).

  2. Isolation and characterization of Desulfitobacterium dehalogenans gen. nov., sp. nov., an anaerobic bacterium which reductively dechlorinates chlorophenolic compounds.

    Science.gov (United States)

    Utkin, I; Woese, C; Wiegel, J

    1994-10-01

    An organism that is able to reductively ortho-dechlorinate 2,4-dichlorophenol and 3-chloro-4-hydroxyphenylacetate (3-Cl-4-OHPA) was isolated from a methanogenic lake sediment. This organism, an anaerobic, motile, Gram-type-positive, rod-shaped bacterium, grew in the presence of 0.1% yeast extract when pyruvate, lactate, formate, or hydrogen was used as the electron donor for reductive dehalogenation of 3-Cl-4-OHPA. Sulfite, thiosulfate, and sulfur were reduced to sulfide, nitrate was reduced to nitrite, and fumarate was reduced to succinate. Dissimilatory reduction of sulfate could not be demonstrated, and no adenylylsulfate reductase was detected with an immunoassay. The organism fermented two pyruvate molecules to one lactate molecule, one acetate molecule, and one carbon dioxide molecule. The pH and temperature optima for both growth and dechlorination of 3-Cl-4-OHPA were 7.5 and 38 degrees C, respectively. The doubling time under these conditions was approximately 3.5 h. On the basis of the results of a 16S rRNA analysis and the inability of the organism to use sulfate as an electron acceptor, strain JW/IU-DC1 is described as the type strain of the new taxon Desulfitobacterium dehalogenans gen. nov., sp. nov.

  3. Dicty_cDB: Contig-U12565-1 [Dicty_cDB

    Lifescience Database Archive (English)

    Full Text Available ) Anaeromyxobacter dehalogenans 2... 200 2e-49 AB045873_5( AB045873 |pid:none) Kurthia sp. 538-KA26 biotin b...:none) Azotobacter vinelandii DJ, compl... 177 2e-42 AB045875_1( AB045875 |pid:none) Kurthia sp. 538-KA26 bi

  4. Functional Role of Infective Viral Particles on Metal Reduction

    Energy Technology Data Exchange (ETDEWEB)

    Coates, John D.

    2014-04-01

    A proposed strategy for the remediation of uranium (U) contaminated sites was based on the immobilization of U by reducing the oxidized soluble U, U(VI), to form a reduced insoluble end product, U(IV). Previous studies identified Geobacter sp., including G. sulfurreducens and G. metallireducens, as predominant U(VI)-reducing bacteria under acetate-oxidizing and U(VI)-reducing conditions. Examination of the finished genome sequence annotation of the canonical metal reducing species Geobacter sulfurreducens strain PCA and G. metallireduceans strain GS-15 as well as the draft genome sequence of G. uraniumreducens strain Rf4 identified phage related proteins. In addition, the completed genome for Anaeromyxobacter dehalogenans and the draft genome sequence of Desulfovibrio desulfuricans strain G20, two more model metal-reducing bacteria, also revealed phage related sequences. The presence of these gene sequences indicated that Geobacter spp., Anaeromyxobacter spp., and Desulfovibrio spp. are susceptible to viral infection. Furthermore, viral populations in soils and sedimentary environments in the order of 6.4×10{sup 6}–2.7×10{sup 10} VLP’s cm{sup -3} have been observed. In some cases, viral populations exceed bacterial populations in these environments suggesting that a relationship may exist between viruses and bacteria. Our preliminary screens of samples collected from the ESR FRC indicated that viral like particles were observed in significant numbers. The objective of this study was to investigate the potential functional role viruses play in metal reduction specifically Fe(III) and U(VI) reduction, the environmental parameters affecting viral infection of metal reducing bacteria, and the subsequent effects on U transport.

  5. Improved Understanding of Microbial Iron and Sulfate Reduction Through a Combination of Bottom-up and Top-down Functional Proteomics Assays

    Energy Technology Data Exchange (ETDEWEB)

    Richardson, Ruth [Cornell Univ., Ithaca, NY (United States)

    2016-02-28

    Our overall goal was to improve the understanding of microbial iron and sulfate reduction by evaluating a diverse iron and sulfate reducing organisms utilizing a multi-omics approach combining “top-down” and “bottom-up” omics methodologies. We initiated one of the first combined comparative genomics, shotgun proteomics, RTqPCR, and heterologous expression studies in pursuit of our project objectives. Within the first year of this project, we created a new bioinformatics tool for ortholog identification (“SPOCS”). SPOCS is described in our publication, Curtis et al., 2013. Using this tool we were able to identify conserved orthologous groups across diverse iron and sulfate reducing microorganisms from Firmicutes, gamma-proteobacteria and delta-proteobacteria. For six iron and sulfate reducers we also performed shotgun proteomics (“bottom-up” proteomics including accurate mass and time (AMT) tag and iTRAQ approaches). Cultures include Gram (-) and Gram (+) microbes. Gram (-) were: Geobacter sulfureducens (grown on iron citrate and fumarate), Geobacter bemidjiensis (grown on iron citrate and fumarate), Shewanella oneidiensis (grown on iron citrate and fumarate) and Anaeromyxobacter dehalogenans (grown on iron citrate and fumarate). Although all cultures grew on insoluble iron, the iron precipitates interfered with protein extraction and analysis; which remains a major challenge for researchers in disparate study systems. Among the Gram (-) organisms studied, Anaeromyxobacter dehalogenans remains the most poorly characterized. Yet, it is arguably the most versatile organisms we studied. In this work we have used comparative proteomics to hypothesize which two of the dozens of predicted c-type cytochromes within Anaeromyxobacter dehalogenans may be directly involved in soluble iron reduction. Unfortunately, heterologous expression of these Anaeromyxobacter dehalogenans ctype cytochromes led to poor protein production and/or formation of inclusion bodies

  6. Biochemistry and physiology of halorespiration by Desulfitobacterium dehalogenans

    NARCIS (Netherlands)

    Pas, van de B.A.

    2000-01-01

    Halorespiration is a novel respiratory pathway, which has been discovered as a result of the search for microorganisms that can be used in bioremediation of chlorinated compounds. Halorespiring bacteria are able to use these compounds as terminal electron acceptor for growth in anaerobic

  7. Molecular characterization of anaerobic dehalogenation by Desulfitobacterium dehalogenans

    NARCIS (Netherlands)

    Smidt, H.

    2001-01-01

    Haloorganics such as chlorophenols and chlorinated ethenes are among the most abundant pollutants in soil, sediments and groundwater, mainly caused by past and present industrial and agricultural activities. Due to bioaccumulation and toxicity, these compounds threaten the integrity of the

  8. Hamstring strain - aftercare

    Science.gov (United States)

    Pulled hamstring muscle; Sprain - hamstring ... There are 3 levels of hamstring strains: Grade 1 -- mild muscle strain or pull Grade 2 -- partial muscle tear Grade 3 -- complete muscle tear Recovery time depends ...

  9. Obturator internus muscle strains

    Directory of Open Access Journals (Sweden)

    Caoimhe Byrne, MB BCh, BAO

    2017-03-01

    Full Text Available We report 2 cases of obturator internus muscle strains. The injuries occurred in young male athletes involved in kicking sports. Case 1 details an acute obturator internus muscle strain with associated adductor longus strain. Case 2 details an overuse injury of the bilateral obturator internus muscles. In each case, magnetic resonance imaging played a crucial role in accurate diagnosis.

  10. A strain gauge

    DEFF Research Database (Denmark)

    2016-01-01

    The invention relates to a strain gauge of a carrier layer and a meandering measurement grid positioned on the carrier layer, wherein the strain gauge comprises two reinforcement members positioned on the carrier layer at opposite ends of the measurement grid in the axial direction....... The reinforcement members are each placed within a certain axial distance to the measurement grid with the axial distance being equal to or smaller than a factor times the grid spacing. The invention further relates to a multi-axial strain gauge such as a bi-axial strain gauge or a strain gauge rosette where each...... of the strain gauges comprises reinforcement members. The invention further relates to a method for manufacturing a strain gauge as mentioned above....

  11. Strain-engineered MOSFETs

    CERN Document Server

    Maiti, CK

    2012-01-01

    Currently strain engineering is the main technique used to enhance the performance of advanced silicon-based metal-oxide-semiconductor field-effect transistors (MOSFETs). Written from an engineering application standpoint, Strain-Engineered MOSFETs introduces promising strain techniques to fabricate strain-engineered MOSFETs and to methods to assess the applications of these techniques. The book provides the background and physical insight needed to understand new and future developments in the modeling and design of n- and p-MOSFETs at nanoscale. This book focuses on recent developments in st

  12. A strain gauge

    DEFF Research Database (Denmark)

    2017-01-01

    The invention relates to a strain gauge of a carrier layer and a meandering measurement grid (101) positioned on the carrier layer, wherein the measurement grid comprises a number of measurement grid sections placed side by side with gaps in between, and a number of end loops (106) interconnecting...... relates to a method for manufacturing a strain gauge as mentioned above....

  13. Photothermal strain imaging

    Science.gov (United States)

    Choi, Changhoon; Ahn, Joongho; Jeon, Seungwan; Kim, Chulhong

    2017-07-01

    Vulnerable plaques are the major cause of cardiovascular disease, but they are difficult to detect with conventional intravascular imaging techniques. Techniques are needed to identify plaque vulnerability based on the presence of lipids in plaque. Thermal strain imaging (TSI) is an imaging technique based on ultrasound (US) wave propagation speed, which varies with the medium temperature. In TSI, the strain that occurs during tissue temperature change can be used for lipid detection because it has a different tendency depending on the type of tissue. Here, we demonstrate photothermal strain imaging (pTSI) using an intravascular ultrasound catheter. pTSI is performed by slightly and selectively heating lipid using a relatively inexpensive continuous laser source. We applied a speckle-tracking algorithm to US B-mode images for strain calculations. As a result, the strain produced in porcine fat was different from the strain produced in water-bearing gelatin phantom, which made it possible to distinguish the two. This suggests that pTSI could potentially be a way of differentiating lipids in coronary artery.

  14. Strain: Fact or Fiction?

    Science.gov (United States)

    Heilbronner, Renée

    2017-04-01

    2017 marks the 50th anniversary of the publication of John Ramsay's well known textbook "Folding and Fracturing of Rocks" - ... and the 30th anniversary of the rejection of a rather less well known paper entitled "Strain: Fact or Fiction?" submitted by Renée Panozzo to the Journal of Structural Geology. The gist of the paper was simple and straight forward: it was argued that not every fabric that can be observed in deformed rocks is necessarily a measure of the amount of strain the rock incurred. A distinction was made between a general "fabric", i.e., the traceable geometry of grain boundaries, for example, and a so-called "strain fabric", i.e., the model geometry that would result from homogeneously straining an initially isotropic fabric and that would exhibit at least orthorhombic symmetry. To verify if a given fabric was indeed a strain fabric it was therefore suggested to use the SURFOR method (published by Panozzo) and to carry out a so-called strain test, i.e., a check of symmetry, before interpreting the results of a fabric analysis in terms of strain. The problem with the paper was that it was very obviously written out of frustration. The frustration came form having reviewed a number of manuscripts which tried to use the then novel SURFOR method for strain analysis without first checking if the the fabric was a indeed a "strain fabric" or not, and then blaming the SURFOR method for producing ambiguous results. As a result, the paper was not exactly well balanced and carefully thought out. It was considered "interesting but not scholarly" by one of the reviewers and down-right offensive by the second. To tell the truth, however, the paper was not formally rejected. The editor Sue Treagus strongly encouraged Panozzo to revise the paper, ... and 30 years later, I will follow her advise and offer a revised paper as a tribute to John Ramsay. To quote from the original manuscript: "We should be a little more impressed that strain works so well, and less

  15. Strain superlattices in graphene

    Science.gov (United States)

    Zhang, Yingjie; Kim, Youngseok; Lyding, Joseph; Gilbert, Matthew; Mason, Nadya

    Superlattices have been widely explored to tailor the electronic properties of two-dimensional electron systems. Previous approaches to create superlattices have been limited to periodic potential modulations, either in the form of electrostatic gating or moiré heterostructures. Here we present a new strategy to generate superlattices in 2D materials. We deposit these 2D membranes on a periodic array of dielectric nanospheres, and achieve superlattices with periodic strain modulations. We studied the electronic and magneto-transport properties of strained graphene superlattices, and observed salient features of Dirac point cloning and Hofstadter's butterfly. Furthermore, we were able to tune the transport properties by changing the magnitude of strain in the graphene superlattice. This new degree of freedom provides a novel platform both for fundamental studies of 2D electron correlations and for prospective applications in 2D electronic devices. Y.Z. and N.M. acknowledge support from the National Science Foundation under Grant No. ENG-1434147.

  16. Strain and temperature measurement

    International Nuclear Information System (INIS)

    Stewart, P.A.E.; Fowler, P.H.

    1988-01-01

    A method of non-invasively measuring strain and temperature of an object, substantially simultaneously, using neutrons of selected energy levels is described. A pulsed neutron source is made to emit thermal and epithermal neutrons in a collimated beam directed at the object. Temperature is monitored by observing the thermal Doppler broadening of resonances in the neutron transmission characteristic for the epithermal neutrons and strain is measured from observations made of changes to the thermal neutron diffraction pattern. The object may be a gas turbine blade or a thrust bearing. (author)

  17. LAOS: The strain softening/strain hardening paradox

    NARCIS (Netherlands)

    Mermet-Guyennet, M.R.B.; de Castro, J.G.; Habibi, M.; Martzel, N.; Denn, M.M.; Bonn, D.

    2015-01-01

    Numerous materials, from biopolymers to filled rubbers, exhibit strain softening at high strain amplitudes during a strain sweep in oscillatory rheology: The modulus decreases with increasing deformation. On the other hand, if the nonlinear elastic response is analyzed within a single oscillation

  18. Ratchetting strain prediction

    International Nuclear Information System (INIS)

    Noban, Mohammad; Jahed, Hamid

    2007-01-01

    A time-efficient method for predicting ratchetting strain is proposed. The ratchetting strain at any cycle is determined by finding the ratchetting rate at only a few cycles. This determination is done by first defining the trajectory of the origin of stress in the deviatoric stress space and then incorporating this moving origin into a cyclic plasticity model. It is shown that at the beginning of the loading, the starting point of this trajectory coincides with the initial stress origin and approaches the mean stress, displaying a power-law relationship with the number of loading cycles. The method of obtaining this trajectory from a standard uniaxial asymmetric cyclic loading is presented. Ratchetting rates are calculated with the help of this trajectory and through the use of a constitutive cyclic plasticity model which incorporates deviatoric stresses and back stresses that are measured with respect to this moving frame. The proposed model is used to predict the ratchetting strain of two types of steels under single- and multi-step loadings. Results obtained agree well with the available experimental measurements

  19. Strain measurement based battery testing

    Science.gov (United States)

    Xu, Jeff Qiang; Steiber, Joe; Wall, Craig M.; Smith, Robert; Ng, Cheuk

    2017-05-23

    A method and system for strain-based estimation of the state of health of a battery, from an initial state to an aged state, is provided. A strain gauge is applied to the battery. A first strain measurement is performed on the battery, using the strain gauge, at a selected charge capacity of the battery and at the initial state of the battery. A second strain measurement is performed on the battery, using the strain gauge, at the selected charge capacity of the battery and at the aged state of the battery. The capacity degradation of the battery is estimated as the difference between the first and second strain measurements divided by the first strain measurement.

  20. Studies on Drosophila radiosensitive strains

    International Nuclear Information System (INIS)

    Varentsova, E.P.; Zakharov, I.A.

    1976-01-01

    45 of radiosensitive strains of Drosophila melanogaster were isolated by Curly/Lobe technique after EMS treatment of Livadia population males. The lethality of non-Curly late larvae after gamma-irradiation (4000r) characterized radiosensitivity strains. Most of them exhibited higher frequency of the spontaneous dominant lethals (up to 69%). The males of 6 strains were semi-sterile. 5 of these strains exhibited higher frequency of X-chromosome non-disjunction

  1. [Echinococcus and strain concepts].

    Science.gov (United States)

    Utük, Armağan Erdem; Simsek, Sami

    2008-01-01

    Hydatid disease (echinococcosis) is one of the most important parasitic zoonoses and remains a public health and economic problem all over the world. Echinococcus granulosus includes a number of genetic variants and, up to date, analyses of mitochondrial DNA sequences have identified ten distinct genetic types (genotypes G1-10). This categorization follows closely the pattern of strain variation emerging based on biological characteristics. The extensive variation in E. granulosus may influence life-cycle patterns, host specificity, development rate, antigenicity, transmission dynamics, sensitivity to chemotherapeutic agents, and pathology. In this review, the recent genetic characterizations of Echinococcus genus have been summarized.

  2. Reconstruction of axisymmetric strain distributions via neutron strain tomography

    Science.gov (United States)

    Abbey, Brian; Zhang, Shu Yan; Vorster, Wim; Korsunsky, Alexander M.

    2012-01-01

    Predicting the behaviour of structural components under a particular set of loading conditions requires knowledge of the residual elastic strain distribution throughout the bulk of these components. Characterising the 3D strain state at any particular point involves the measurement of six independent components which make up the second order strain tensor. Mapping the complete strain distribution throughout large volumes thus presents significant practical challenges. One possible solution to this problem is to reconstruct the 3D variation of strain components using tomographic techniques. The basic principle underpinning this idea is that the multi-component strain tensor can be reconstructed from a redundant set of lower order projection data. Here we demonstrate this fundamental concept for two samples: a shrink fit 'ring-and-plug' sample, and a spray-quenched circular cylinder, both possessing axially symmetric internal strain distribution. We present and contrast different approaches to the strain tomography problem. The methods described here can also be readily applied to high-energy X-ray diffraction measurements and represent an important step toward developing the tomographic reconstruction framework for strain tensor distributions of arbitrary complexity. The major benefit of neutron strain tomography is that the incident beam flux is utilised more fully, greatly reducing the data collection times. Using micro-channel plate (MCP) neutron detectors, a spatial resolution of the order of 0.1 mm can be achieved [1].

  3. Sadovskii vortex in strain

    Science.gov (United States)

    Freilich, Daniel; Llewellyn Smith, Stefan

    2014-11-01

    A Sadovskii vortex is a patch of fluid with uniform vorticity surrounded by a vortex sheet. Using a boundary element type method, we investigate the steady states of this flow in an incompressible, inviscid straining flow. Outside the vortex, the fluid is irrotational. In the limiting case where the entire circulation is due to the vortex patch, this is a patch vortex (Moore & Saffman, Aircraft wake turbulence and its detection 1971). In the other limiting case, where all the circulation is due to the vortex sheet, this is a hollow vortex (Llewellyn Smith and Crowdy, J. Fluid Mech. 691, 2012). This flow has two governing nondimensional parameters, relating the strengths of the straining field, vortex sheet, and patch vorticity. We study the relationship between these two parameters, and examine the shape of the resulting vortices. We also work towards a bifurcation diagram of the steady states of the Sadovskii vortex in an attempt to understand the connection between vortex sheet and vortex patch desingularizations of the point vortex. Support from NSF-CMMI-0970113.

  4. Colony Dimorphism in Bradyrhizobium Strains

    Science.gov (United States)

    Sylvester-Bradley, Rosemary; Thornton, Philip; Jones, Peter

    1988-01-01

    Ten isolates of Bradyrhizobium spp. which form two colony types were studied; the isolates originated from a range of legume species. The two colony types differed in the amount of gum formed or size or both, depending on the strain. Whole 7-day-old colonies of each type were subcultured to determine the proportion of cells which had changed to the other type. An iterative computerized procedure was used to determine the rate of switching per generation between the two types and to predict proportions reached at equilibrium for each strain. The predicted proportions of the wetter (more gummy) or larger colony type at equilibrium differed significantly between strains, ranging from 0.9999 (strain CIAT 2383) to 0.0216 (strain CIAT 2469), because some strains switched faster from dry to wet (or small to large) and others switched faster from wet to dry (or large to small). Predicted equilibrium was reached after about 140 generations in strain USDA 76. In all but one strain (CIAT 3030) the growth rate of the wetter colony type was greater than or similar to that of the drier type. The mean difference in generation time between the two colony types was 0.37 h. Doubling times calculated for either colony type after 7 days of growth on the agar surface ranged from 6.0 to 7.3 h. The formation of two persistent colony types by one strain (clonal or colony dimorphism) may be a common phenomenon among Bradyrhizobium strains. Images PMID:16347599

  5. Asymptomatic bacteriuria Escherichia coli strains

    DEFF Research Database (Denmark)

    Hancock, Viktoria; Nielsen, E.M.; Klemm, Per

    2006-01-01

    Urinary tract infections (UTIs) affect millions of people each year. Escherichia coli is the most common organism associated with asymptomatic bacteriuria (ABU) in humans. Persons affected by ABU may carry a particular E. coli strain for extended periods of time without any symptoms. In contrast...... to uropathogenic E. coli (UPEC) that cause symptomatic UTI, very little is known about the mechanisms by which these strains colonize the urinary tract. Here, we have investigated the growth characteristics in human urine as well as adhesin repertoire of nine ABU strains; the ability of ABU strains to compete...

  6. Hydrogen production from microbial strains

    Science.gov (United States)

    Harwood, Caroline S; Rey, Federico E

    2012-09-18

    The present invention is directed to a method of screening microbe strains capable of generating hydrogen. This method involves inoculating one or more microbes in a sample containing cell culture medium to form an inoculated culture medium. The inoculated culture medium is then incubated under hydrogen producing conditions. Once incubating causes the inoculated culture medium to produce hydrogen, microbes in the culture medium are identified as candidate microbe strains capable of generating hydrogen. Methods of producing hydrogen using one or more of the microbial strains identified as well as the hydrogen producing strains themselves are also disclosed.

  7. TL transgenic mouse strains

    International Nuclear Information System (INIS)

    Obata, Y.; Matsudaira, Y.; Hasegawa, H.; Tamaki, H.; Takahashi, T.; Morita, A.; Kasai, K.

    1993-01-01

    As a result of abnormal development of the thymus of these mice, TCR αβ lineage of the T cell differentiation is disturbed and cells belonging to the TCR γδ CD4 - CD8 - double negative (DN) lineage become preponderant. The γδ DN cells migrate into peripheral lymphoid organs and constitute nearly 50% of peripheral T cells. Immune function of the transgenic mice is severely impaired, indicating that the γδ cells are incapable of participating in these reactions. Molecular and serological analyses of T-cell lymphomas reveal that they belong to the γδ lineage. Tg.Tla a -3-1 mice should be useful in defining the role of TL in normal and abnormal T cell differentiation as well as in the development of T-cell lymphomas, and further they should facilitate studies on the differentiation and function of γδ T cells. We isolated T3 b -TL gene from B6 mice and constructed a chimeric gene in which T3 b -TL is driven by the promoter of H-2K b . With the chimeric gene, two transgenic mouse strains, Tg. Con.3-1 and -2 have been derived in C3H background. Both strains express TL antigen in various tissues including skin. The skin graft of transgenic mice on C3H and (B6 X C3H)F 1 mice were rejected. In the mice which rejected the grafts, CD8 + TCRαβ cytotoxic T cells (CTL) against TL antigens were recognized. The recognition of TL by CTL did not require the antigen presentation by H-2 molecules. The results indicated that TL antigen in the skin becomes a transplantation antigen and behaves like a typical allogeneic MHC class I antigen. The facts that (B6 X C3H)F 1 mice rejected the skin expressing T3 b -TL antigen and induced CTL that killed TL + lymphomas of B6 origin revealed that TL antigen encoded by T3 b -TL is recognized as non-self in B6 mice. Experiments are now extended to analyze immune responses to TL antigen expressed on autochthonous T cell lymphomas. (J.P.N.)

  8. Nutritionally fastidious Ruminococct $ flovefociens : strains

    African Journals Online (AJOL)

    than those obtained in a medium containing rumen fluid. Growth of all strains was remarkably uniform. Where the same inoculum was used, differences in the qualitative com- position of the medium usually had little effect on growth. In contrast, the R. f/avefaciens strains were much more variable in their growth responses.

  9. Haldane model under nonuniform strain

    Science.gov (United States)

    Ho, Yen-Hung; Castro, Eduardo V.; Cazalilla, Miguel A.

    2017-10-01

    We study the Haldane model under strain using a tight-binding approach, and compare the obtained results with the continuum-limit approximation. As in graphene, nonuniform strain leads to a time-reversal preserving pseudomagnetic field that induces (pseudo-)Landau levels. Unlike a real magnetic field, strain lifts the degeneracy of the zeroth pseudo-Landau levels at different valleys. Moreover, for the zigzag edge under uniaxial strain, strain removes the degeneracy within the pseudo-Landau levels by inducing a tilt in their energy dispersion. The latter arises from next-to-leading order corrections to the continuum-limit Hamiltonian, which are absent for a real magnetic field. We show that, for the lowest pseudo-Landau levels in the Haldane model, the dominant contribution to the tilt is different from graphene. In addition, although strain does not strongly modify the dispersion of the edge states, their interplay with the pseudo-Landau levels is different for the armchair and zigzag ribbons. Finally, we study the effect of strain in the band structure of the Haldane model at the critical point of the topological transition, thus shedding light on the interplay between nontrivial topology and strain in quantum anomalous Hall systems.

  10. Strain gradients in epitaxial ferroelectrics

    International Nuclear Information System (INIS)

    Catalan, G.; Noheda, B.; McAneney, J.; Sinnamon, L.J.; Gregg, J.M.

    2005-01-01

    X-ray analysis of ferroelectric thin layers of Ba 1/2 Sr 1/2 TiO 3 with different thicknesses reveals the presence of strain gradients across the films and allows us to propose a functional form for the internal strain profile. We use this to calculate the influence of strain gradient, through flexoelectric coupling, on the degradation of the ferroelectric properties of films with decreasing thickness, in excellent agreement with the observed behavior. This paper shows that strain relaxation can lead to smooth, continuous gradients across hundreds of nanometers, and it highlights the pressing need to avoid such strain gradients in order to obtain ferroelectric films with bulklike properties

  11. A cell strain system for small homogeneous strain applications.

    Science.gov (United States)

    Bottlang, M; Simnacher, M; Schmitt, H; Brand, R A; Claes, L

    1997-11-01

    A cell culture system has been developed that enables application of well characterized, homogeneously distributed cyclic strains to monolayer cell cultures. Optically clear silicone culture dishes atop Plexiglas base plates are deformed by four-point bending of flexible silicone culture wells driven in user specified strain cycle patterns using computer controlled electromagnetic linear actuators. Cyclic mechano-transduction can be induced in amplitudes of 0 to 3000 mustrain, in frequencies of 0 to 30 Hz and in any specified strain cycle pattern. The cell culture system, which contains six simultaneously driven culture wells, has been mechanically characterized by holographic interferometry, laser displacement sensor recordings of the dish surfaces, strain gauge monitoring of the base plates, and finite element modeling of the dishes on the base plates. The standard deviation of the strain amplitudes among the six simultaneously stimulated culture wells is less than 5%. The cell culture system allows accurate generation of small magnitudes of well characterized, homogeneous strain, easy handling of the culture wells, flexible setting of cyclic strain pattern parameters, simultaneous stimulation of 6 culture wells, and light microscopic observation of the cell cultures.

  12. Strain expansion-reduction approach

    Science.gov (United States)

    Baqersad, Javad; Bharadwaj, Kedar

    2018-02-01

    Validating numerical models are one of the main aspects of engineering design. However, correlating million degrees of freedom of numerical models to the few degrees of freedom of test models is challenging. Reduction/expansion approaches have been traditionally used to match these degrees of freedom. However, the conventional reduction/expansion approaches are only limited to displacement, velocity or acceleration data. While in many cases only strain data are accessible (e.g. when a structure is monitored using strain-gages), the conventional approaches are not capable of expanding strain data. To bridge this gap, the current paper outlines a reduction/expansion technique to reduce/expand strain data. In the proposed approach, strain mode shapes of a structure are extracted using the finite element method or the digital image correlation technique. The strain mode shapes are used to generate a transformation matrix that can expand the limited set of measurement data. The proposed approach can be used to correlate experimental and analytical strain data. Furthermore, the proposed technique can be used to expand real-time operating data for structural health monitoring (SHM). In order to verify the accuracy of the approach, the proposed technique was used to expand the limited set of real-time operating data in a numerical model of a cantilever beam subjected to various types of excitations. The proposed technique was also applied to expand real-time operating data measured using a few strain gages mounted to an aluminum beam. It was shown that the proposed approach can effectively expand the strain data at limited locations to accurately predict the strain at locations where no sensors were placed.

  13. Strain fluctuations and elastic constants

    Energy Technology Data Exchange (ETDEWEB)

    Parrinello, M.; Rahman, A.

    1982-03-01

    It is shown that the elastic strain fluctuations are a direct measure of elastic compliances in a general anisotropic medium; depending on the ensemble in which the fluctuation is measured either the isothermal or the adiabatic compliances are obtained. These fluctuations can now be calculated in a constant enthalpy and pressure, and hence, constant entropy, ensemble due to recent develpments in the molecular dynamics techniques. A calculation for a Ni single crystal under uniform uniaxial 100 tensile or compressive load is presented as an illustration of the relationships derived between various strain fluctuations and the elastic modulii. The Born stability criteria and the behavior of strain fluctuations are shown to be related.

  14. Strain accumulation in quasicrystalline solids

    International Nuclear Information System (INIS)

    Nori, F.; Ronchetti, M.; Elser, V.

    1988-01-01

    We study the relaxation of 2D quasicrystalline elastic networks when their constituent bonds are perturbed homogeneously. Whereas ideal, quasiperiodic networks are stable against such perturbations, we find significant accumulations of strain in a class of disordered networks generated by a growth process. The grown networks are characterized by root mean square phason fluctuations which grow linearly with system size. The strain accumulation we observe in these networks also grows linearly with system size. Finally, we find a dependence of strain accumulation on cooling rate

  15. Roll bonding of strained aluminium

    DEFF Research Database (Denmark)

    Staun, Jakob M.

    2003-01-01

    This report investigates roll bonding of pre-strained (å ~ 4) aluminium sheets to produce high strain material from high purity aluminium (99.996%) and commercial pure aluminium (99.6%). The degree of bonding is investigated by optical microscopy and ultrasonic scanning. Under the right...... of the cross rolled volume fraction is found. To further asses this effect, and the anisotropy, it is necessary to acquire knowledge about both texture and microstructure, e.g. by TEM. Roll bonding of pre-strained aluminium is found to be a possible alternative to ARB in the quest for ultra-fine grained...

  16. Strain localisation in granular media

    OpenAIRE

    Desrues , Jacques

    1984-01-01

    This study is devoted to strain localisation in Granular materials. Both experimental and theoretical results have been obtained.The first part of the thesis is a review of the methods and theories about rupture in sols mechanics and more generally, in solid mechanics. The classical framework of Shear Band analysis is presented, and the main results available for different classes of materials are discussed.The second part describes an experimental study of strain localisation in sand specime...

  17. Photoacoustic spectroscopy of Entamoeba histolytica strains

    Science.gov (United States)

    Acosta-Avalos, D.; Alvarado-Gil, J. J.; Silva, E. F.; Orozco, E.; de Menezes, L. F.; Vargas, H.

    2005-06-01

    Pathogenic and non-pathogenic strains of E. histolytica are studied using photoacoustic spectroscopy. It is shown that the pathogenic strain presents a spectrum similar to that of iron sulfur proteins. The non-pathogenic strain does not show any relevant absorption at the studied wavelength range. The differences observed between the optical absorption spectra of both strains opens the possibility of using photoacoustic spectroscopy as a reliable and simple technique to identify different types of E. histolytica strains.

  18. Mobilomics in Saccharomyces cerevisiae strains.

    Science.gov (United States)

    Menconi, Giulia; Battaglia, Giovanni; Grossi, Roberto; Pisanti, Nadia; Marangoni, Roberto

    2013-03-20

    Mobile Genetic Elements (MGEs) are selfish DNA integrated in the genomes. Their detection is mainly based on consensus-like searches by scanning the investigated genome against the sequence of an already identified MGE. Mobilomics aims at discovering all the MGEs in a genome and understanding their dynamic behavior: The data for this kind of investigation can be provided by comparative genomics of closely related organisms. The amount of data thus involved requires a strong computational effort, which should be alleviated. Our approach proposes to exploit the high similarity among homologous chromosomes of different strains of the same species, following a progressive comparative genomics philosophy. We introduce a software tool based on our new fast algorithm, called regender, which is able to identify the conserved regions between chromosomes. Our case study is represented by a unique recently available dataset of 39 different strains of S.cerevisiae, which regender is able to compare in few minutes. By exploring the non-conserved regions, where MGEs are mainly retrotransposons called Tys, and marking the candidate Tys based on their length, we are able to locate a priori and automatically all the already known Tys and map all the putative Tys in all the strains. The remaining putative mobile elements (PMEs) emerging from this intra-specific comparison are sharp markers of inter-specific evolution: indeed, many events of non-conservation among different yeast strains correspond to PMEs. A clustering based on the presence/absence of the candidate Tys in the strains suggests an evolutionary interconnection that is very similar to classic phylogenetic trees based on SNPs analysis, even though it is computed without using phylogenetic information. The case study indicates that the proposed methodology brings two major advantages: (a) it does not require any template sequence for the wanted MGEs and (b) it can be applied to infer MGEs also for low coverage genomes

  19. A NEW STRAIN OF TRANSMISSIBLE LEUCEMIA IN FOWLS (STRAIN H).

    Science.gov (United States)

    Ellermann, V

    1921-03-31

    1. A new strain of fowl leucosis has been transmitted through twelve generations of fowls. 2. An increase in virulence was observed during its passage. This was shown in a shortening of the interval between inoculation and death. The increase in virulence does not affect the number of successful inoculations, which remains approximately constant in from 20 to 40 per cent of the birds employed. 3. As with former strains, the disease manifests itself in various forms; i.e., myeloid and intravascular lymphoid types. A single lymphatic case was observed. 4. In several intravascular cases a diminution in the hemolytic power of the serum was established. This phenomenon was absent in a number of myeloid cases. 5. Active immunization cannot be produced by means of the subcutaneous injection of virulent material. 6. The finding of previous experiments that the virus is filterable has been confirmed. 7. The inoculation of human leucemic material into fowls gave negative results.

  20. Beryllium strain under dynamic loading

    Directory of Open Access Journals (Sweden)

    Pushkov Victor

    2015-01-01

    Full Text Available There are some data (not much on dynamic characteristics of beryllium that are important, for example, when estimating construction performance at NPP emergencies. A number of data on stress-strain curves, spall strength, shear strength, fracture and structure responses of shock loaded beryllium have obtained in US and Russian laboratories. For today the model description of this complex metal behavior does not have a reasonable agreement with the experimental data, thus a wider spectrum of experimental data is required. This work presents data on dynamic compression-test diagrams of Russian beryllium. Experiments are performed using Hopkinson bar method (SHPB. Strain rates were ε ∼ 103 s−1.

  1. Development of Industrial Yeast Platform Strains

    DEFF Research Database (Denmark)

    Bergdahl, Basti; Dato, Laura; Förster, Jochen

    2014-01-01

    Most of the current metabolic engineering projects are carried out using laboratory strains as the starting host. Although such strains are easily manipulated genetically, their robustness does not always meet the requirements set by industrial fermentation conditions. In such conditions, the cel...... screening of the 36 industrial and laboratory yeast strains. In addition, progress in the development of molecular biology methods for generating the new strains will be presented....

  2. Strain engineering of van der Waals heterostructures

    NARCIS (Netherlands)

    Vermeulen, Paul A.; Mulder, Jefta; Momand, Jamo; Kooi, Bart J.

    2018-01-01

    Modifying the strain state of solids allows control over a plethora of functional properties. The weak interlayer bonding in van der Waals (vdWaals) materials such as graphene, hBN, MoS2, and Bi2Te3 might seem to exclude strain engineering, since strain would immediately relax at the vdWaals

  3. drug resistant strains of Salmonella enterica

    African Journals Online (AJOL)

    Conclusions: The aqueous extract of Thonningia sanguinea can provide an alternative therapy for the treatment of salmonellosis, mainly for typhoid fever caused by MDR strains of S. Typhi.The extract also inhibits S.Hadar a MDR emerging strain in Ivory Coast. Keywords: Thonningia sanguinea; Salmonella, MDR strains, ...

  4. Modal strain energies in COSMIC NASTRAN

    Science.gov (United States)

    Snyder, B. D.; Venkayya, V. B.

    1989-01-01

    A computer program was developed to take a NASTRAN output file from a normal modes analysis and calculate the modal strain energies of selected elements. The FORTRAN program can determine the modal strain energies for CROD, CBAR, CELAS, CTRMEM, CQDMEM2, and CSHEAR elements. Modal strain energies are useful in estimating damping in structures.

  5. Engineering piezoresistivity using biaxially strained silicon

    DEFF Research Database (Denmark)

    Pedersen, Jesper Goor; Richter, Jacob; Brandbyge, Mads

    2008-01-01

    of the piezocoefficient on temperature and dopant density is altered qualitatively for strained silicon. In particular, we find that a vanishing temperature coefficient may result for silicon with grown-in biaxial tensile strain. These results suggest that strained silicon may be used to engineer the iezoresistivity...

  6. Phenotypic characterization of Lactobacillus strains isolated from ...

    African Journals Online (AJOL)

    Thirty three strains of Lactobacillus were isolated from human milk and infant faeces, animal (cow and goat) milks and from plants (Anagalis arvensis and Bromus mango species). The various strains were identified based on phenotypic tests. Amongst them, 12 strains belonged to group 1, which comprised L. acidophilus, ...

  7. Antigenic differentiation of classical swine fever vaccinal strain PAV-250 from other strains, including field strains from Mexico.

    Science.gov (United States)

    Mendoza, Susana; Correa-Giron, Pablo; Aguilera, Edgar; Colmenares, Germán; Torres, Oscar; Cruz, Tonatiuh; Romero, Andres; Hernandez-Baumgarten, Eliseo; Ciprián, Abel

    2007-10-10

    Twenty-nine classical swine fever virus (CSFv) strains were grown in the PK15 or SK6 cell lines. Antigenic differentiation studies were performed using monoclonal antibodies (McAbs), produced at Lelystad (CDI-DLO), The Netherlands. The monoclonals which were classified numerically as monoclonals 2-13. Epitope map patterns that resulted from the reactivity with McAbs were found to be unrelated to the pathogenicity of the viruses studied. Antigenic determinants were recognized by McAbs 5 and 8, were not detected in some Mexican strains; however, sites for McAb 6 were absent in all strains. The PAV-250 vaccine strain was recognized by all MAbs, except by MAb 6. Furthermore, the Chinese C-S vaccine strain was found to be very similar to the GPE(-) vaccine. None of the studied Mexican vaccines or field strains was found to be similar to the PAV-250 vaccine strain.

  8. Computational Strain Gradient Crystal Plasticity

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Kysar, Jeffrey W.

    2011-01-01

    element solution method is presented, which delivers the slip-rate field and the velocity-field based on two minimum principles. Some plane deformation problems relevant for certain specific orientations of a face centered cubic crystal under plane loading conditions are studied, and effective in......A model for strain gradient crystal visco-plasticity is formulated along the lines proposed by Fleck andWillis (2009) for isotropic plasticity. Size-effects are included in the model due to the addition of gradient terms in both the free energy as well as through a dissipation potential. A finite...

  9. Monoclonal antibodies to Toxoplasma gondii strain 119 identify recently isolated Danish strains as one group

    DEFF Research Database (Denmark)

    Jensen, L.; Petersen, E.; Henriksen, S.A.

    1998-01-01

    Four mAb raised against the Danish Toxoplasma gondii strain 119, were selected by screening hybridoma supernatants by indirect immunofluorescence against tachyzoites of the RH strain in order to obtain strain restricted markers. Strain restriction extended beyond discrimination of the 119 and RH...

  10. Spontaneous abortion and physical strain around implantation

    DEFF Research Database (Denmark)

    Hjollund, N H; Jensen, Tina Kold; Bonde, Jens Peter

    2000-01-01

    Existing studies of physical strain and spontaneous abortion are mainly retrospective or based only on pregnancies that have survived the first trimester. Furthermore, almost all studies have relied on averaged measures of physical strain, which tend to blur an effect if peak values during short...... pregnancy the women recorded physical strain prospectively in a structured diary. Physical strain around the time of implantation was associated with later spontaneous abortion. The adjusted risk ratio for women who reported physical strain higher than average at day 6 to 9 after the estimated date...

  11. Local strains in waste tank deflagration analysis

    International Nuclear Information System (INIS)

    Bryan, B.J.; Flanders, H.E. Jr.

    1993-01-01

    In recent years extensive effort has been expended to qualify buried nuclear waste storage tanks under accident conditions. One of these conditions is deflagration of the combustible gases which may build up over time. While much work has been done to calculate the general strain state, less effort has been made to address the local strains at structural discontinuities. An analytical method is presented for calculating these local strains and combining them with the general strain state. A closed form solution of the local strains is compared to a finite element solution

  12. On lower order strain gradient plasticity theories

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Hutchinson, J. W.

    2003-01-01

    the tangent moduli governing increments of stress and strain. It is shown that the modification is far from benign from a mathematical standpoint, changing the qualitative character of solutions and leading to a new type of localization that is at odds with what is expected from a strain gradient theory......By way of numerical examples, this paper explores the nature of solutions to a class of strain gradient plasticity theories that employ conventional stresses, equilibrium equations and boundary conditions. Strain gradients come into play in these modified conventional theories only to alter....... The findings raise questions about the physical acceptability of this class of strain gradient theories....

  13. Sensibility of different wheat varieties (strains) to Ar+ implantation

    International Nuclear Information System (INIS)

    Cui Huanhu; Jing Hua; Ma Aiping; Kang Xiuli; Yang Liping; Huang Mingjing; Ma Buzhou; Shanxi Academy of Agricultural Sciences, Taiyuan

    2005-01-01

    The sensibility of different wheat varieties (strains) to Ar + implantation was studied. The results showed that the survival rate of 21 wheat varieties (strains) at the dose of 6 x 10 16 Ar + /cm 2 could be divided into five groups: surplus sensitive varieties (strains), sensitive varieties (strains), transitional varieties (strains), obtuse varieties (strains) and surplus obtuse varieties (strains). The sensibility of wheat varieties (strains) to Ar + injection is high-moisture-fertility wheat varieties (strains) > medium-moisture-fertility wheat varieties (strains) > dry land wheat varieties (strains). The study has provided theoretical basis in induced mutation medial lethal dose of different wheat varieties (strains) to Ar + implantation. (authors)

  14. Studies on Drosophila radiosensitivity strains

    International Nuclear Information System (INIS)

    Varentsova, E.R.; Sharygin, V.I.; Khromykh, Yu.U.

    1985-01-01

    Fertility of radiosensitive mutant drosophila female strain rad (2) 201 61 after irradiation and frequency of dominant lethal mutations (DLM), induced by γ-radiation for 0-5 h and 5-7 days, are investigated. It is shown, that oocytes of the mutant strain are more radiosensitive as compared with cells of mongrel flies as to criterion of DLM appearance over the period of maturing. Early oocytes of stages 2-7 are the most sensitive, i.e. at the stages, corresponding to the manifestation of previously established recombination-defective properties of mutations rad (2) 201 61 . It is also sown, that doses of γ-rays, exceeding 10 Gy produce a strong sterilizing effect on mutant females due to destruction and resorption of egg chambers, irradiated at the stages of previtellogenetic growth of oocytes. In females, carrying mutation of radiosensitivity there is no direct correlation betwen sensitivity of oocytes proper to DLM induction and sensitivity of egg folleicles to resorbing effect of γ-rays. The ways of possible involvement of mutant locus studied into genetic processes in various specialized cells of drosophila

  15. Experimental tests of planar strain theory for predicting bone cross-sectional longitudinal and shear strains.

    Science.gov (United States)

    Verner, Kari A; Lehner, Michael; Lamas, Luis P; Main, Russell P

    2016-10-01

    Understanding of the diversity of skeletal loading regimes in vertebrate long bones during locomotion has been significantly enhanced by the application of planar strain theory (PST) to in vivo bone strain data. PST is used to model the distribution of longitudinal strains normal to the bone's transverse cross-section and the location of the neutral axis of bending. To our knowledge, the application of this theory to skeletal biomechanics has not been experimentally validated. We evaluated the accuracy of PST using strain measurements from emu tibiotarsi instrumented with four strain gauges and loaded in ex vivo four-point bending. Using measured strains from three-gauge combinations, PST was applied to predict strain values at a fourth gauge's location. Experimentally measured and predicted strain values correlated linearly with a slope near 1.0, suggesting that PST accurately predicts longitudinal strains. Additionally, we assessed the use of PST to extrapolate shear strains to locations on a bone not instrumented with rosette strain gauges. Guineafowl tibiotarsi were instrumented with rosette strain gauges and in vivo longitudinal and shear strains were measured during treadmill running. Individual-specific and sample-mean ratios between measured longitudinal strains from the medial and posterior bone surfaces were used to extrapolate posterior-site shear strain from shear strains measured on the medial surface. Measured and predicted shear strains at the posterior gauge site using either ratio showed trends for a positive correlation between measured and predicted strains, but the correlation did not equal 1.0 and had a non-zero intercept, suggesting that the use of PST should be carefully considered in the context of the goals of the study and the desired precision for the predicted shear strains. © 2016. Published by The Company of Biologists Ltd.

  16. Thermoresistance in radioresistant strains of 'Drosophila nebulosa'

    International Nuclear Information System (INIS)

    Kratz, F.L.

    1977-01-01

    The detection of thermoresistance in radioresistant strains of 'D. nebulosa' is described, as well as some conclusions on the genetic nature of these differences are presented. The strains used in this experiment were MF 204, from 'Morro de Ferro', in Pocos de Caldas (MG) (one of the biggest radioactive anomalies in the world) whose radioresistance is due to its additive genetic components (Kratz, 1973 and 1975); 85(87) R, an induced radioresistant strain; and MF K a control 'pooled' strain obtained near 'Morro do Ferro'. Survival tests, 72 hours after temperature shocks, performed in the interval of 36 0 C to 39 0 C showed a decreasing gradient of thermoresistance with the following regression coefficients: MF 204 b= - 5,4; 85(87)R b= - 7,2 and MF K b= - 7,9. Bifactorial analysis (strains and sexes) performed at 38 0 C and 39 0 C confirmed differences among strains (P [pt

  17. Effect of strain rate and temperature at high strains on fatigue behavior of SAP alloys

    DEFF Research Database (Denmark)

    Blucher, J.T.; Knudsen, Per; Grant, N.J.

    1968-01-01

    Fatigue behavior of three SAP alloys of two nominal compositions (7 and 13% Al2O3) was studied in terms of strain rate and temperature at high strains; strain rate had no effect on life at 80 F, but had increasingly greater effect with increasing temperature above 500 F; life decreased with decre......Fatigue behavior of three SAP alloys of two nominal compositions (7 and 13% Al2O3) was studied in terms of strain rate and temperature at high strains; strain rate had no effect on life at 80 F, but had increasingly greater effect with increasing temperature above 500 F; life decreased...

  18. An experimental evaluation of apparent strain from foil strain gauges attached to carbon composite substrates

    Science.gov (United States)

    Scott, B. R.; Lanius, S. J.; Auer, C. W.

    1987-01-01

    An experimental evaluation of apparent thermal strains is conducted using various combinations of substrate/gauge/attachment structure and redundant high temperature extensometry. It is found that the extensometry could either confirm independent measurements of the substrate's thermal expansion, or quantify nonzero mechanical strains resulting from uncertain material behavior and boundary conditions. Apparent strain and thermal expansion behavior data can then be used to modify the raw strain measurements in order to determine either stress producing or total strains. Limitation of the correction procedure for the three selected strain gauges is noted which is due to relatively large gauge/attachment variability.

  19. [Conservation of Malassezia strains in blotting paper].

    Science.gov (United States)

    Ramos, Laura; Ramadán, Silvana; López, Clara; Bulacio, Lucía; Mellado, Soledad

    2006-06-01

    Reference strains belonging to the genus Malassezia were analyzed to evaluate, by comparison, different preservation systems such us subculture, freezing at -80 degrees C in glycerol, and blotting paper-disc conservation. The viability, phenotypic and genotypic characteristics of the strains used in this study was evaluated. The blotting paper method was found to be advantageous to preserve Malassezia spp strains due to both, its simple implementation in the laboratory and its efficiency.

  20. Investigation of Electronic Devices for Strain Measurement

    Directory of Open Access Journals (Sweden)

    Ričardas Masiulionis

    2011-08-01

    Full Text Available Importance of strain measuring for safety of buildings is shown. The strain monitoring should be one of the buildings security systems. Often used balanced and non-balanced Wheatstone bridge strain measurement methods are analyzed. The Wheatstone bridge method with feedback is improved. A new method based on small resistance changes by the digital balancing currents is presented. Computer and experimental models of measurement are investigated. The received results confirm theoretical assumptions.Article in Lithuanian

  1. Acceleration and Velocity Sensing from Measured Strain

    Science.gov (United States)

    Pak, Chan-Gi; Truax, Roger

    2016-01-01

    A simple approach for computing acceleration and velocity of a structure from the strain is proposed in this study. First, deflection and slope of the structure are computed from the strain using a two-step theory. Frequencies of the structure are computed from the time histories of strain using a parameter estimation technique together with an Autoregressive Moving Average model. From deflection, slope, and frequencies of the structure, acceleration and velocity of the structure can be obtained using the proposed approach. shape sensing, fiber optic strain sensor, system equivalent reduction and expansion process.

  2. On fracture in finite strain gradient plasticity

    DEFF Research Database (Denmark)

    Martínez Pañeda, Emilio; Niordson, Christian Frithiof

    2016-01-01

    predictions. These differences increase significantly when large strains are taken into account, as a consequence of the contribution of strain gradients to the work hardening of the material. The magnitude of stress elevation at the crack tip and the distance ahead of the crack where GNDs significantly alter......In this work a general framework for damage and fracture assessment including the effect of strain gradients is provided. Both mechanism-based and phenomenological strain gradient plasticity (SGP) theories are implemented numerically using finite deformation theory and crack tip fields...

  3. [Characteristics of Lactobacillus strains contained in pharmaceuticals].

    Science.gov (United States)

    Banach, W; Bucholc, B; Wójcik, B

    2001-01-01

    The aim of the study was to characterize lactic acid bacteria (LAB) which are components of drugs administered orally in cases of intestinal disturbances, or antibiotic--related diarrhea. Biochemical properties, growth behavior, bile tolerance, and survival at low pH of six LAB strains (four strains L. rhamnosus and two L. acidophilus) were studied. The survival at low pH was determined in MRS broth (Difco) acidified to pH 1; 2; 3; and 4. Bile tolerance was tested on MRS broth with 0.3% oxgall (Difco). Between tested strains differences in ability to grow at low pH and survival in bile were observed. Only 0.01% inoculum of all examined strains survived at pH 1. Differences between strains in survival at low pH (pH 2 and pH 3) and tolerance of bile were observed. However, after 2 h incubation at pH 4, 100% of strains stayed alive. Examined strains demonstrated good 3% bile tolerance. All strains met the criteria for probiotic strains: ability to survive at pH 3 and in the presence of bile.

  4. Material approaches to stretchable strain sensors.

    Science.gov (United States)

    Park, Jaeyoon; You, Insang; Shin, Sangbaie; Jeong, Unyong

    2015-04-27

    With the recent progress made in wearable electronics, devices now require high flexibility and stretchability up to large strain levels (typically larger than 30 % strain). Wearable strain sensors or deformable strain sensors have been gaining increasing research interest because of the rapid development of electronic skins and robotics and because of their biomedical applications. Conventional brittle strain sensors made of metals and piezoresistors are not applicable for such stretchable sensors. This Review summarizes recent advances in stretchable sensors and focuses on material aspects for high stretchability and sensitivity. It begins with a brief introduction to the Wheatstone bridge circuit of conventional resistive strain sensors. Then, studies on the manipulation of materials are reviewed, including waved structural approaches for making metals and semiconductors stretchable, the use of liquid metals, and conductive filler/elastomer composites by using percolation among the fillers. For capacitive strain sensors, the constant conductivity of the electrode is a key factor in obtaining reliable sensors. Possible approaches to developing capacitive strain sensors are presented. This Review concludes with a discussion on the major challenges and perspectives related to stretchable strain sensors. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Optical fiber sensor technique for strain measurement

    Science.gov (United States)

    Butler, Michael A.; Ginley, David S.

    1989-01-01

    Laser light from a common source is split and conveyed through two similar optical fibers and emitted at their respective ends to form an interference pattern, one of the optical fibers having a portion thereof subjected to a strain. Changes in the strain cause changes in the optical path length of the strain fiber, and generate corresponding changes in the interference pattern. The interference pattern is received and transduced into signals representative of fringe shifts corresponding to changes in the strain experienced by the strained one of the optical fibers. These signals are then processed to evaluate strain as a function of time, typical examples of the application of the apparatus including electrodeposition of a metallic film on a conductive surface provided on the outside of the optical fiber being strained, so that strains generated in the optical fiber during the course of the electrodeposition are measurable as a function of time. In one aspect of the invention, signals relating to the fringe shift are stored for subsequent processing and analysis, whereas in another aspect of the invention the signals are processed for real-time display of the strain changes under study.

  6. High Strain Rate Characterisation of Composite Materials

    DEFF Research Database (Denmark)

    Eriksen, Rasmus Normann Wilken

    for testing fibre-reinforced polymers due to their elastic behaviour and low strain to failure. This is problematic as the High-speed servo-hydraulic test machine closes the gap between quasi-static tests rates and lower strain rates, which are achievable with the Split Hopkinson Pressure Bar. The Split...... and was concluded the method could create the required Incident waves. However, there was an upper limit in the generated stress rates due to frictional problems and this limited the maximum achievable strain rates. The maximum strain rate was also found to be independent of the specimen gage length, which only...

  7. Job strain and the risk of stroke

    DEFF Research Database (Denmark)

    Fransson, Eleonor I; Nyberg, Solja T; Heikkilä, Katriina

    2015-01-01

    studies to investigate the association between job strain, a measure of work-related stress, and incident stroke. RESULTS: In 1.8 million person-years at risk (mean follow-up 9.2 years), 2023 first-time stroke events were recorded. The age- and sex-adjusted hazard ratio for job strain relative to no job....... CONCLUSION: Job strain may be associated with an increased risk of ischemic stroke, but further research is needed to determine whether interventions targeting job strain would reduce stroke risk beyond existing preventive strategies....

  8. Properties of strain gages at cryogenic temperature

    International Nuclear Information System (INIS)

    Shibata, Nobuo; Fujiyoshi, Toshimitsu.

    1978-01-01

    At the time of developing superconduction generators, the stress measurement for rotor parts is required to grasp the safety and performance of the rotor at cryogenic temperature, which is cooled with liquid helium. In case of carrying out the stress measurement with strain gages, the problems are as follows. The strain gages and lead wires are exposed to cryogenic temperature from 4 to 10 K and strong magnetic field of about 3T, and subjected to high centrifugal acceleration of about 500G. In order to establish the techniques of the stress measurement under such conditions, the adhesives and damp-proof coatings for strain gages and strain gages themselves in Japan and foreign countries were examined on the properties at cryogenic temperature. As for the properties of strain gages, mainly the apparent strain owing to temperature change was investigated, and the change of the gage factors was studies only at liquid nitrogen temperature. The stress measurement with strain gages at low temperature had been studied in detail down to liquid nitrogen temperature concerning LNG tanks. The experimental apparatus, the samples, the testing methods and the test results of cooling tests on adhesives and damp-proof coatings, and the temperature characteristics of strain gages are reported. The usable adhesives and coatings were found, and correction by accurate temperature measurement is required for apparent strain. (Kako, I.)

  9. Simulating colonic survival of probiotics in single-strain products compared to multi-strain products.

    Science.gov (United States)

    Forssten, S D; Ouwehand, A C

    2017-01-01

    Background : Probiotic formulations can be single- or multi-strain. Commercially, multi-strain preparations have been suggested to have improved functionality over single-strain cultures. Probiotics are often tested as single-strain preparations but may subsequently be commercially formulated as multi-strain products. Objective : The aim of this study was to determine what happens at the site of action, the intestine, with probiotics as single- compared to multi-strain preparations. The human gastrointestinal tract contains a broad mixture of different microbes which may affect the survival of different probiotics in different ways. Design : The current study was performed to evaluate, in an in vitro colon simulation, whether probiotics influence each other's survival when they are taken as a combination of several strains (HOWARU Restore; Lactobacillus acidophilus NCFM, Lactobacillus paracasei Lpc-37, Bifidobacterium lactis Bl-04 and B. lactis Bi-07) compared to the strains as single preparations. Results : All strains could be detected after the colon simulations and there were no substantial differences in levels of the same strain when comparing single- and multi-strain products. Conclusions : It can be concluded that probiotics do not have an antagonistic effect on each other's survival when used in a multi-strain product compared to a single-strain product, at least within a microbiota in a simulated colonic environment.

  10. Enzymes From Rare Actinobacterial Strains.

    Science.gov (United States)

    Suriya, J; Bharathiraja, S; Manivasagan, P; Kim, S-K

    Actinobacteria constitute rich sources of novel biocatalysts and novel natural products for medical and industrial utilization. Although actinobacteria are potential source of economically important enzymes, the isolation and culturing are somewhat tough because of its extreme habitats. But now-a-days, the rate of discovery of novel compounds producing actinomycetes from soil, freshwater, and marine ecosystem has increased much through the developed culturing and genetic engineering techniques. Actinobacteria are well-known source of their bioactive compounds and they are the promising source of broad range of industrially important enzymes. The bacteria have the capability to degrade a range of pesticides, hydrocarbons, aromatic, and aliphatic compounds (Sambasiva Rao, Tripathy, Mahalaxmi, & Prakasham, 2012). Most of the enzymes are mainly derived from microorganisms because of their easy of growth, minimal nutritional requirements, and low-cost for downstream processing. The focus of this review is about the new, commercially useful enzymes from rare actinobacterial strains. Industrial requirements are now fulfilled by the novel actinobacterial enzymes which assist the effective production. Oxidative enzymes, lignocellulolytic enzymes, extremozymes, and clinically useful enzymes are often utilized in many industrial processes because of their ability to catalyze numerous reactions. Novel, extremophilic, oxidative, lignocellulolytic, and industrially important enzymes from rare Actinobacterial population are discussed in this chapter. © 2016 Elsevier Inc. All rights reserved.

  11. Simulation and Analysis of Strain Sensitivity of CNT-Based Strain Sensors

    Science.gov (United States)

    Sapra, Gaurav; Vig, Renu; Sharma, Manu

    2016-10-01

    Carbon nanotubes (CNT) is turning out to be a replacement to all the existing traditional sensors due to their high gauge factor, multidirectional sensing capability, high flexibility, low mass density, high dynamic range and high sensitivity to strains at nano and macro- scales. The strain sensitivity of CNT-based strain sensors depends on number of parameters; quality and quantity of CNT used, type of polymer used, deposition and dispersion technique adopted and also on environmental conditions. Due to all these parameters, the piezoresistive behavior of CNT is diversified and it needs to be explored. This paper theoretically analyses the strain sensitivity of CNT-based strain sensors. The strain sensitivity response of CNT strain sensor is a result of change in total resistance of CNT network with respect to applied strain. The total resistance of CNT network consists of intrinsic resistance and inter-tube resistance. It has been found that the change in intrinsic resistance under strain is due to the variation of bandgap of individual, which depends on the chirality of the tube and it varies exponentially with strain. The inter-tube resistance of CNT network changes nonlinearly due to change in distance between neighboring CNTs with respect to applied strain. As the distance d between CNTs increases due to applied strain, tunneling resistance Rtunnel increases nonlinearly in exponential manner. When the concentration of CNTs in composite is close to percolation threshold, then the change of inter-tube resistances is more dominant than intrinsic resistance. At percolation threshold, the total resistance of CNT networks changes nonlinearly and this effect of nonlinearity is due to tunneling effect. The strain sensitivity of CNT-based strain sensors also varies nonlinearly with the change in temperature. For the change of temperature from -20∘C to 50∘C, there is more than 100% change in strain sensitivity of CNT/polymer composite strain sensor. This change is

  12. Job strain and time to pregnancy

    DEFF Research Database (Denmark)

    Hjollund, N H; Jensen, Tina Kold; Bonde, J P

    1998-01-01

    The association between fertility and job strain defined as high job demands and low job control has not previously been studied. A follow-up study was conducted with prospective collection of information on job strain among women, achievement of pregnancy, and potential confounding variables....

  13. Strain mapping analysis of textile composites

    NARCIS (Netherlands)

    Ivanov, Dimitry; Ivanov, S.; Lomov, Stepan; Verpoest, Ignaas

    2009-01-01

    The focus of the work is meso-scale analysis (scale level of the fabric unit cell) of textile composite deformation and failure. The surface strain measurement is used for: (1) experimental investigation, which includes study of strain distribution at various stages of deformation, plasticity

  14. Organic metabolites produced by Vibrio parahaemolyticus strain ...

    African Journals Online (AJOL)

    Identification and action of several antibacterial metabolites produced by a fish pathogen Vibrio parahaemolyticus strain An3 from marine ecosystem of Goa has been demonstrated. Antibacterial activity of the crude cell extract of the test bacterium has been evaluated against indicator pathogenic bacterial strains such as ...

  15. Medically Complex Home Care and Caregiver Strain

    Science.gov (United States)

    Moorman, Sara M.; Macdonald, Cameron

    2013-01-01

    Purpose of the study: To examine (a) whether the content of caregiving tasks (i.e., nursing vs. personal care) contributes to variation in caregivers' strain and (b) whether the level of complexity of nursing tasks contributes to variation in strain among caregivers providing help with such tasks. Design and methods: The data came from the Cash…

  16. Snowball: Strain aware gene assembly of Metagenomes

    NARCIS (Netherlands)

    I. Gregor; A. Schönhuth (Alexander); A.C. McHardy (Alice)

    2015-01-01

    htmlabstractGene assembly is an important step in functional analysis of shotgun metagenomic data. Nonetheless, strain aware assembly remains a challenging task, as current assembly tools often fail to distinguish among strain variants or require closely related reference genomes of the studied

  17. Snowball: strain aware gene assembly of metagenomes

    NARCIS (Netherlands)

    I. Gregor; A. Schönhuth (Alexander); A.C. McHardy (Alice)

    2016-01-01

    textabstractMotivation: Gene assembly is an important step in functional analysis of shotgun metagenomic data. Nonetheless, strain aware assembly remains a challenging task, as current assembly tools often fail to distinguish among strain variants or require closely related reference genomes of the

  18. Phenotypic characterization of Lactobacillus strains isolated from ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-10-05

    Oct 5, 2009 ... fermented foods. By considering phenotypic tests, this work aims at iden- tifying new LAB strains isolated from human, animal or vegetal biotopes and to ..... Lactobacillus strains identified based on the pH achieved after 6 and 24 h of culture. Time (h). Cause of the variations. DFa. SSEb. MSc. Fd. Pe. 6.

  19. Characterization and monitoring of selected rhizobial strains ...

    African Journals Online (AJOL)

    ... A. mangium Willd., Milletia leucantha Kurz., Pterocarpus indicus Willd., and Xylia xylocarpa Taub. grown in Thailand. Forty four highly effective rhizobial strains were selected on the basis of nitrogenase activity, number of nodules and plant biomass. The selected strains were characterized in both terms of physiology and

  20. Petroleum-hydrocarbons biodegradation by Pseudomonas strains ...

    African Journals Online (AJOL)

    Many indigenous microorganisms in water and soil are capable of degrading hydrocarbon contaminants. In this study, two bacterial strains were isolated from a contaminated soil of a refinery of Arzew (Oran). The isolated strains were identified as Pseudomonas aeruginosa (P3) and Pseudomonas fluoresens (P4).

  1. Strain differentiation of polioviruses with monoclonal antibodies.

    NARCIS (Netherlands)

    A.D.M.E. Osterhaus (Albert); A.L. van Wezel; A.J.H. Stegmann; J.A.A.M. van Asten (Jack)

    1984-01-01

    textabstractPanels of monoclonal antibodies raised against different poliovirus type 1, 2 and 3 strains, were tested in a micro-neutralization test and in a micro-enzyme linked immunosorbent assay against a large number of poliovirus strains. The results were compared with those obtained with the

  2. Preliminary characterization of slow growing rhizobial strains ...

    African Journals Online (AJOL)

    In this paper, we did some preliminary characterization of six slow growing rhizobial strains, isolated from Retama monosperma (L.) Boiss. root nodules sampled from 3 sites along the coast of Oran (CapeFalcon, Bousfer and MersElHadjadj) in Northwestern Algeria. Results of this study showed that all strains had a very ...

  3. Active strain modulation in field effect devices

    NARCIS (Netherlands)

    van Hemert, T.; Hueting, Raymond Josephus Engelbart

    2012-01-01

    In this work we propose a novel feature for the transistor: a piezo-electric layer for strain modulation of the channel. The strain is formed at strong inversion only, to obtain a lower threshold voltage, but will be absent in the off-state to preserve the unstrained leakage current. Our results,

  4. Spontaneous abortion and physical strain around implantation

    DEFF Research Database (Denmark)

    Hjollund, N H; Jensen, Tina Kold; Bonde, Jens Peter

    2000-01-01

    Existing studies of physical strain and spontaneous abortion are mainly retrospective or based only on pregnancies that have survived the first trimester. Furthermore, almost all studies have relied on averaged measures of physical strain, which tend to blur an effect if peak values during short ...

  5. General Strain Theory and Delinquency: Focusing on the Influences of Key Strain Characteristics on Delinquency

    Science.gov (United States)

    Moon, Byongook; Blurton, David; McCluskey, John D.

    2008-01-01

    The study examines the effects of recent, older, and chronic strains and of perceived injustice of strain on delinquency, sampling 777 Korean youth. Seven key strains most likely leading to delinquency, some of which were often overlooked in previous research, were included, and these are family conflict, parental punishment, teachers' punishment,…

  6. Spontaneous abortion and physical strain around implantation

    DEFF Research Database (Denmark)

    Hjøllund, Niels Henrik Ingvar; Jensen, T.K.; Bonde, J.P.

    2000-01-01

    Existing studies of physical strain and spontaneous abortion are mainly retrospective or based only on pregnancies that have survived the first trimester. Furthermore, almost all studies have relied on averaged measures of physical strain, which tend to blur an effect if peak values during short...... time periods are the relevant measure. We followed a cohort of first pregnancy planners from termination of birth control until pregnancy for a maximum of six menstrual cycles. The analyses include 181 pregnancies, of which 32 were subclinical pregnancies detected by hCG analysis only. During early...... pregnancy the women recorded physical strain prospectively in a structured diary. Physical strain around the time of implantation was associated with later spontaneous abortion. The adjusted risk ratio for women who reported physical strain higher than average at day 6 to 9 after the estimated date...

  7. Atlas of stress-strain curves

    CERN Document Server

    2002-01-01

    The Atlas of Stress-Strain Curves, Second Edition is substantially bigger in page dimensions, number of pages, and total number of curves than the previous edition. It contains over 1,400 curves, almost three times as many as in the 1987 edition. The curves are normalized in appearance to aid making comparisons among materials. All diagrams include metric (SI) units, and many also include U.S. customary units. All curves are captioned in a consistent format with valuable information including (as available) standard designation, the primary source of the curve, mechanical properties (including hardening exponent and strength coefficient), condition of sample, strain rate, test temperature, and alloy composition. Curve types include monotonic and cyclic stress-strain, isochronous stress-strain, and tangent modulus. Curves are logically arranged and indexed for fast retrieval of information. The book also includes an introduction that provides background information on methods of stress-strain determination, on...

  8. Pseudomagnetic fields and triaxial strain in graphene

    DEFF Research Database (Denmark)

    Settnes, Mikkel; Power, Stephen; Jauho, Antti-Pekka

    2016-01-01

    Pseudomagnetic fields, which can result from nonuniform strain distributions, have received much attention in graphene systems due to the possibility of mimicking real magnetic fields with magnitudes of greater than 100 T. We examine systems with such strains confined to finite regions ("pseudoma......Pseudomagnetic fields, which can result from nonuniform strain distributions, have received much attention in graphene systems due to the possibility of mimicking real magnetic fields with magnitudes of greater than 100 T. We examine systems with such strains confined to finite regions......-binding calculations of single pseudomagnetic dots in extended graphene sheets confirm these predictions, and are also used to study the effect of rotating the strain direction with respect to the underlying graphene lattice, and varying the size of the pseudomagnetic dot....

  9. Strain rate effects in stress corrosion cracking

    Energy Technology Data Exchange (ETDEWEB)

    Parkins, R.N. (Newcastle upon Tyne Univ. (UK). Dept. of Metallurgy and Engineering Materials)

    1990-03-01

    Slow strain rate testing (SSRT) was initially developed as a rapid, ad hoc laboratory method for assessing the propensity for metals an environments to promote stress corrosion cracking. It is now clear, however, that there are good theoretical reasons why strain rate, as opposed to stress per se, will often be the controlling parameter in determining whether or not cracks are nucleated and, if so, are propagated. The synergistic effects of the time dependence of corrosion-related reactions and microplastic strain provide the basis for mechanistic understanding of stress corrosion cracking in high-pressure pipelines and other structures. However, while this may be readily comprehended in the context of laboratory slow strain tests, its extension to service situations may be less apparent. Laboratory work involving realistic stressing conditions, including low-frequency cyclic loading, shows that strain or creep rates give good correlation with thresholds for cracking and with crack growth kinetics.

  10. Cranial bone morphometric study among mouse strains

    Directory of Open Access Journals (Sweden)

    Yamamura Ken-ichi

    2008-02-01

    Full Text Available Abstract Background Little is known about the molecular mechanism which regulates how the whole cranium is shaped. Mouse models currently available for genetic research include several hundreds of unique inbred strains and genetically engineered mutants. By cross comparing their genomic structures, we can elucidate the cause of any differences in the phenotype between two strains. The craniometry of subspecies, or closely related species, of mice provide a good systemic model to study the relationship between genetic variance and cranial shape evolution. The lack of a quantified framework for comparing and analyzing mouse cranial shape has been a problem. For this reason, we performed quantitative analysis of cranial shape morphology between several mouse strains. Results This article reports on a craniometric assay of seven mouse strains: four inbred strains (C57BL/6J, BALB/cA, C3H/HeJ, and CBA/JNCr from Mus musculus domesticus (M. m. domesticus; one closed colony strain (ICR from M. m. domesticus; one inbred strain (MSM/Ms from Mus musculus molossinus; and, Mus spretus as a strain from a species other than M. m. domesticus. We performed linear measurements and geometric morphometrics. Geometric morphometrics revealed that the cranial characteristics of each strains were clearly distinguishable. We obtained mean scores for each species using the tpsRelw Program and plotted them. Conclusion Geometric morphometrics proved to be useful for identifying and classifying variations in form, and it revealed that M. spretus has a slender cranium when compared with our other strains. The mean cranial shape of C3H or CBA was more similar to MSM/Ms, which is derived from M. m. molossinus, than to either C57BL/6J, BALB, or ICR which are derived from M. m. domesticus. Future work in this field will aid in elucidating the mechanism of whole cranial shape regulation.

  11. Cranial bone morphometric study among mouse strains

    Science.gov (United States)

    2008-01-01

    Background Little is known about the molecular mechanism which regulates how the whole cranium is shaped. Mouse models currently available for genetic research include several hundreds of unique inbred strains and genetically engineered mutants. By cross comparing their genomic structures, we can elucidate the cause of any differences in the phenotype between two strains. The craniometry of subspecies, or closely related species, of mice provide a good systemic model to study the relationship between genetic variance and cranial shape evolution. The lack of a quantified framework for comparing and analyzing mouse cranial shape has been a problem. For this reason, we performed quantitative analysis of cranial shape morphology between several mouse strains. Results This article reports on a craniometric assay of seven mouse strains: four inbred strains (C57BL/6J, BALB/cA, C3H/HeJ, and CBA/JNCr) from Mus musculus domesticus (M. m. domesticus); one closed colony strain (ICR) from M. m. domesticus; one inbred strain (MSM/Ms) from Mus musculus molossinus; and, Mus spretus as a strain from a species other than M. m. domesticus. We performed linear measurements and geometric morphometrics. Geometric morphometrics revealed that the cranial characteristics of each strains were clearly distinguishable. We obtained mean scores for each species using the tpsRelw Program and plotted them. Conclusion Geometric morphometrics proved to be useful for identifying and classifying variations in form, and it revealed that M. spretus has a slender cranium when compared with our other strains. The mean cranial shape of C3H or CBA was more similar to MSM/Ms, which is derived from M. m. molossinus, than to either C57BL/6J, BALB, or ICR which are derived from M. m. domesticus. Future work in this field will aid in elucidating the mechanism of whole cranial shape regulation. PMID:18307817

  12. Strain specificity and simultaneous transmission of closely related strains of a Potyvirus by Myzus persicae.

    Science.gov (United States)

    Srinivasan, Rajagopalbabu; Hall, Darren G; Cervantes, Felix A; Alvarez, Juan M; Whitworth, Jonathan L

    2012-06-01

    Potato virus Y (PVY), a Potyvirus, is transmitted by aphids in a nonpersistent manner. PVY severely affects potato production worldwide. Single and mixed infections of PVY strains, namely PVY(O), PVY(NTN), and PVY(N:O) are a common occurrence in potato systems. However, information available on the ability of aphids to simultaneously transmit multiple PVY strains, specificity associated with simultaneous transmission, and factors affecting specificity are limited. Aphid-mediated transmission experiments were conducted to test the ability of individual aphids to transmit multiple strains using a PVY indicator host. Preliminary results revealed that aphids can transmit at least two viral strains simultaneously. Subsequently, aphid-mediated transmission of three dual-strain combinations was tested using potato plants. Individual aphids transmitted two viral strains simultaneously for all three dual-strain combinations. In all aphid-mediated dual-strain infections involving PVY(NTN), the rate of PVY(NTN) infection was greater than the infection rates of the second strain and dual-strain combinations, indicating specificity associated with transmission of PVY strains. Results of aphid-mediated transmission experiments were compared with results obtained through mechanical transmission. In general, PVY infection rates from aphid-mediated transmission were lower than the rates obtained through mechanical transmission. Unlike aphid-mediated transmission, component strains in dual-strain inoculations were not eliminated during mechanical transmission. These results suggest that there may also be interference associated with aphid-mediated transmission of closely related PVY strains. Perhaps, the observed specificity and/or interference may explain the increase in the incidence of PVY(NTN) and other necrotic strains in recent years.

  13. Elastic properties of polycaprolactone at small strains are significantly affected by strain rate and temperature.

    Science.gov (United States)

    Kurniawan, D; Nor, F M; Lee, H Y; Lim, J Y

    2011-10-01

    Tensile tests were conducted on polycaprolactone at various strain rates and temperatures. Focusing on the mechanical properties within only the small-strain elastic region, i.e. up to the inflection point in the stress-strain diagram, it was found that strain rate and temperature had significant effects on the polymer. This finding implies that the effects of strain rate and temperature on the elastic properties of polycaprolactone should be considered in the design and manufacture of rigidity-sensitive, load-bearing applications, including use as biomaterial for scaffolds in tissue engineering applications.

  14. Amerindian Helicobacter pylori strains go extinct, as european strains expand their host range.

    Directory of Open Access Journals (Sweden)

    Maria G Domínguez-Bello

    Full Text Available We studied the diversity of bacteria and host in the H. pylori-human model. The human indigenous bacterium H. pylori diverged along with humans, into African, European, Asian and Amerindian groups. Of these, Amerindians have the least genetic diversity. Since niche diversity widens the sets of resources for colonizing species, we predicted that the Amerindian H. pylori strains would be the least diverse. We analyzed the multilocus sequence (7 housekeeping genes of 131 strains: 19 cultured from Africans, 36 from Spanish, 11 from Koreans, 43 from Amerindians and 22 from South American Mestizos. We found that all strains that had been cultured from Africans were African strains (hpAfrica1, all from Spanish were European (hpEurope and all from Koreans were hspEAsia but that Amerindians and Mestizos carried mixed strains: hspAmerind and hpEurope strains had been cultured from Amerindians and hpEurope and hpAfrica1 were cultured from Mestizos. The least genetically diverse H. pylori strains were hspAmerind. Strains hpEurope were the most diverse and showed remarkable multilocus sequence mosaicism (indicating recombination. The lower genetic structure in hpEurope strains is consistent with colonization of a diversity of hosts. If diversity is important for the success of H. pylori, then the low diversity of Amerindian strains might be linked to their apparent tendency to disappear. This suggests that Amerindian strains may lack the needed diversity to survive the diversity brought by non-Amerindian hosts.

  15. Chemical Profile of Monascus ruber Strains

    Directory of Open Access Journals (Sweden)

    Ahamed M. Moharram

    2012-01-01

    Full Text Available Chemical profile of Monascus ruber strains has been studied using gas chromatography-mass spectrometry (GC/MS analysis. The colour intensity of the red pigment and secondary metabolic products of two M. ruber strains (AUMC 4066 and AUMC 5705 cultivated on ten different media were also studied. Metabolic products can be classified into four categories: anticholesterol, anticancer, food colouring, and essential fatty acids necessary for human health. Using GC/MS, the following 88 metabolic products were detected: butyric acid and its derivatives (25 products, other fatty acids and their derivatives (19 products, pyran and its derivatives (22 products and other metabolites (22 products. Among these, 32 metabolites were specific for AUMC 4066 strain and 34 for AUMC 5705 strain, whereas 22 metabolites were produced by both strains on different tested substrates. Production of some metabolites depended on the substrate used. High number of metabolites was recorded in the red pigment extract obtained by both strains grown on malt broth and malt agar. Also, 42 aroma compounds were recorded (4 alcohols, 2 benzaldehydes, 27 esters, 3 lactones, 1 phenol, 1 terpenoid, 3 thiol compounds and acetate-3-mercapto butyric acid. Thin layer chromatography and GC/MS analyses revealed no mycotoxin citrinin in any media used for the growth of the two M. ruber strains.

  16. Development of intra-strain self-cloning procedure for breeding baker's yeast strains.

    Science.gov (United States)

    Nakagawa, Youji; Ogihara, Hiroyuki; Mochizuki, Chisato; Yamamura, Hideki; Iimura, Yuzuru; Hayakawa, Masayuki

    2017-03-01

    Previously reported self-cloning procedures for breeding of industrial yeast strains require DNA from other strains, plasmid DNA, or mutagenesis. Therefore, we aimed to construct a self-cloning baker's yeast strain that exhibits freeze tolerance via an improved self-cloning procedure. We first disrupted the URA3 gene of a prototrophic baker's yeast strain without the use of any marker gene, resulting in a Δura3 homozygous disruptant. Then, the URA3 gene of the parental baker's yeast strain was used as a selection marker to introduce the constitutive TDH3 promoter upstream of the PDE2 gene encoding high-affinity cyclic AMP phosphodiesterase. This self-cloning procedure was performed without using DNA from other Saccharomyces cerevisiae strains, plasmid DNA, or mutagenesis and was therefore designated an intra-strain self-cloning procedure. Using this self-cloning procedure, we succeeded in producing self-cloning baker's yeast strains that harbor the TDH3p-PDE2 gene heterozygously and homozygously, designated TDH3p-PDE2 hetero and TDH3p-PDE2 homo strains, respectively. These self-cloning strains expressed much higher levels of PDE2 mRNA than the parental strain and exhibited higher viability after freeze stress, as well as higher fermentation ability in frozen dough, when compared with the parental strain. The TDH3p-PDE2 homo strain was genetically more stable than the TDH3p-PDE2 hetero strain. These results indicate that both heterozygous and homozygous strains of self-cloning PDE2-overexpressing freeze-tolerant strains of industrial baker's yeast can be prepared using the intra-strain self-cloning procedure, and, from a practical viewpoint, the TDH3p-PDE2 homo strain constructed in this study is preferable to the TDH3p-PDE2 hetero strain for frozen dough baking. Copyright © 2016 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  17. Aflatoxin B1 producing potential of Aspergillus flavus strains isolated ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-07-20

    Jul 20, 2009 ... However, 65% of the strains produced AFB1 on Czapek's agar, 53% of the strains on potato dextrose agar (PDA) and none of the strains on Aspergillus flavus and parasiticus agar media (AFPA). The strain, DRAf 009 produced maximum AFB1 (4.0 – 40 µg/g agar) on all the agar media tested. Five strains of ...

  18. Novel Insights Into Microbial Uranium Reduction and Immobilization

    Science.gov (United States)

    Loeffler, F. E.; Fletcher, K.; Thomas, S.; Kemner, K. M.; Boyanov, M.; Sanford, R.

    2010-12-01

    revealed unexpected strain diversity at the U-contaminated Oak Ridge IRFC site, and monitored the responses Anaeromyxobacter community to environmental perturbations (i.e., ethanol biostimulation, oxygen intrusion). The quantitative assessment provided novel information on the distribution of Anaeromyxobacter in the contaminated subsurface, and suggested that members of an Anaeromyxobacter clade with no cultured representatives dominated the U reduction treatment zone.

  19. Stability of germanene under tensile strain

    KAUST Repository

    Kaloni, Thaneshwor P.

    2013-09-01

    The stability of germanene under biaxial tensile strain and the accompanying modifications of the electronic properties are studied by density functional theory. The phonon spectrum shows that up to 16% strain the germanene lattice is stable, where the Dirac cone shifts towards higher energy and hole-doped Dirac states are achieved. The latter is due to weakening of the Ge-Ge bonds and reduction of the s-p hybridization. Our calculated Grüneisen parameter shows a similar dependence on the strain as reported for silicene (which is different from that of graphene). © 2013 Elsevier B.V. All rights reserved.

  20. Strain-energy effects on dynamic fragmentation

    International Nuclear Information System (INIS)

    Glenn, L.A.; Chudnovsky, A.

    1986-01-01

    Grady's model of the dynamic fragmentation process, in which the average fragment size is determined by balancing the local kinetic energy and the surface energy, is modified to include the stored elastic (strain) energy. The revised model predicts that the strain energy should dominate for brittle materials, with low fracture toughness and high fracture-initiation stress. This conclusion is not borne out, however, by limited experimental data on brittle steels, even when the kinetic-energy density is small compared with the strain-energy density

  1. Static strain aging in austenitic stainless steels

    International Nuclear Information System (INIS)

    Monteiro, S.N.

    1978-07-01

    The static strain aging effects were investigated in austenitic stainless steels by measuring the yield points developed in tensile tests following the arrest of the crosshead for some period of time. The results appear to indicate that the dragging of dislocations in the interval of temperatures from 100 to 300 0 C, where the strain aging is effective, does not apparently depend on the Cottrell's atmosphere. Moreover the influence of the pre-deformation and time on the yield point intensity displayed the existence of stages. The strain aging mechanics and the reasons for the stages were discussed. (Author) [pt

  2. On lower order strain gradient plasticity theories

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Hutchinson, J. W.

    2002-01-01

    By way of numerical examples, this paper explores the nature of solutions to a class of strain gradient plasticity theories that employ conventional stresses, equilibrium equations and boundary conditions. Strain gradients come into play in these modified conventional theories only to alter...... the tangential moduli governing increments of stress and strain. It is shown that the modification is far from benign from a mathematical standpoint, changing the qualitative character of solutions and leading to a new type of localization that appears to be unphysical....

  3. A study of the effect of apparent strain on thermal stress measurement for two types of elevated temperature strain gages

    Science.gov (United States)

    Jenkins, J. M.

    1983-01-01

    A weldable type strain gage was used to measure low level thermal stress in an elevated temperature environment. Foil strain gages used in a comparative manner reveal that the apparent strain of weldable strain gages is not sufficiently known to acquire accurate low level thermal stress data. Apparent strain data acquired from coupon tests reveals a large scatter in apparent strain characteristics among the weldable strain gages. It is concluded that apparent strain data for individual weldable strain gages must be required prior to installation if valid thermal stress data is to be obtained through the temperature range of room temperature to 755 K (900 F).

  4. Rat Strain Ontology: structured controlled vocabulary designed to facilitate access to strain data at RGD.

    Science.gov (United States)

    Nigam, Rajni; Munzenmaier, Diane H; Worthey, Elizabeth A; Dwinell, Melinda R; Shimoyama, Mary; Jacob, Howard J

    2013-11-22

    The Rat Genome Database (RGD) ( http://rgd.mcw.edu/) is the premier site for comprehensive data on the different strains of the laboratory rat (Rattus norvegicus). The strain data are collected from various publications, direct submissions from individual researchers, and rat providers worldwide. Rat strain, substrain designation and nomenclature follow the Guidelines for Nomenclature of Mouse and Rat Strains, instituted by the International Committee on Standardized Genetic Nomenclature for Mice. While symbols and names aid in identifying strains correctly, the flat nature of this information prohibits easy search and retrieval, as well as other data mining functions. In order to improve these functionalities, particularly in ontology-based tools, the Rat Strain Ontology (RS) was developed. The Rat Strain Ontology (RS) reflects the breeding history, parental background, and genetic manipulation of rat strains. This controlled vocabulary organizes strains by type: inbred, outbred, chromosome altered, congenic, mutant and so on. In addition, under the chromosome altered category, strains are organized by chromosome, and further by type of manipulations, such as mutant or congenic. This allows users to easily retrieve strains of interest with modifications in specific genomic regions. The ontology was developed using the Open Biological and Biomedical Ontology (OBO) file format, and is organized on the Directed Acyclic Graph (DAG) structure. Rat Strain Ontology IDs are included as part of the strain report (RS: ######). As rat researchers are often unaware of the number of substrains or altered strains within a breeding line, this vocabulary now provides an easy way to retrieve all substrains and accompanying information. Its usefulness is particularly evident in tools such as the PhenoMiner at RGD, where users can now easily retrieve phenotype measurement data for related strains, strains with similar backgrounds or those with similar introgressed regions. This

  5. Strain histograms are equal to strain ratios in predicting malignancy in breast tumours

    Science.gov (United States)

    Ewertsen, Caroline; Sletting, Susanne; Talman, Maj-Lis; Vejborg, Ilse; Bachmann Nielsen, Michael

    2017-01-01

    Objectives To assess whether strain histograms are equal to strain ratios in predicting breast tumour malignancy and to see if either could be used to upgrade Breast Imaging Reporting and Data System (BI-RADS) 3 tumours for immediate biopsy. Methods Ninety-nine breast tumours were examined using B-mode BI-RADS scorings and strain elastography. Strain histograms and ratios were assessed, and areas- under-the-receiver-operating-characteristic-curve (AUROC) for each method calculated. In BI-RADS 3 tumours cut-offs for strain histogram and ratio values were calculated to see if some tumours could be upgraded for immediate biopsy. Linear regression was performed to evaluate the effect of tumour depth and size, and breast density on strain elastography. Results Forty-four of 99 (44.4%) tumours were malignant. AUROC of BI-RADS, strain histograms and strain ratios were 0.949, 0.830 and 0.794 respectively. There was no significant difference between AUROCs of strain histograms and strain ratios (P = 0.405), while they were both inferior to BI-RADS scoring (PBI-RADS 3 tumours were malignant. When cut-offs of 189 for strain histograms and 1.44 for strain ratios were used to upgrade BI-RADS 3 tumours, AUROCS were 0.961 (Strain histograms and BI-RADS) and 0.941 (Strain ratios and BI-RADS). None of them was significantly different from BI-RADS scoring alone (P = 0.249 and P = 0.414). Tumour size and depth, and breast density influenced neither strain histograms (P = 0.196, P = 0.115 and P = 0.321) nor strain ratios (P = 0.411, P = 0.596 and P = 0.321) Conclusion Strain histogram analyses are reliable and easy to do in breast cancer diagnosis and perform comparably to strain ratio analyses. No significant difference in AUROCs between BI-RADS scoring and elastography combined with BI-RADS scoring was found in this study. PMID:29073170

  6. Strain histograms are equal to strain ratios in predicting malignancy in breast tumours.

    Directory of Open Access Journals (Sweden)

    Jonathan Frederik Carlsen

    Full Text Available To assess whether strain histograms are equal to strain ratios in predicting breast tumour malignancy and to see if either could be used to upgrade Breast Imaging Reporting and Data System (BI-RADS 3 tumours for immediate biopsy.Ninety-nine breast tumours were examined using B-mode BI-RADS scorings and strain elastography. Strain histograms and ratios were assessed, and areas- under-the-receiver-operating-characteristic-curve (AUROC for each method calculated. In BI-RADS 3 tumours cut-offs for strain histogram and ratio values were calculated to see if some tumours could be upgraded for immediate biopsy. Linear regression was performed to evaluate the effect of tumour depth and size, and breast density on strain elastography.Forty-four of 99 (44.4% tumours were malignant. AUROC of BI-RADS, strain histograms and strain ratios were 0.949, 0.830 and 0.794 respectively. There was no significant difference between AUROCs of strain histograms and strain ratios (P = 0.405, while they were both inferior to BI-RADS scoring (P<0.001, P = 0.008. Four out of 26 BI-RADS 3 tumours were malignant. When cut-offs of 189 for strain histograms and 1.44 for strain ratios were used to upgrade BI-RADS 3 tumours, AUROCS were 0.961 (Strain histograms and BI-RADS and 0.941 (Strain ratios and BI-RADS. None of them was significantly different from BI-RADS scoring alone (P = 0.249 and P = 0.414. Tumour size and depth, and breast density influenced neither strain histograms (P = 0.196, P = 0.115 and P = 0.321 nor strain ratios (P = 0.411, P = 0.596 and P = 0.321.Strain histogram analyses are reliable and easy to do in breast cancer diagnosis and perform comparably to strain ratio analyses. No significant difference in AUROCs between BI-RADS scoring and elastography combined with BI-RADS scoring was found in this study.

  7. Strain histograms are equal to strain ratios in predicting malignancy in breast tumours

    DEFF Research Database (Denmark)

    Carlsen, Jonathan Frederik; Ewertsen, Caroline; Sletting, Susanne

    2017-01-01

    could be upgraded for immediate biopsy. Linear regression was performed to evaluate the effect of tumour depth and size, and breast density on strain elastography. Results: Forty-four of 99 (44.4%) tumours were malignant. AUROC of BI-RADS, strain histograms and strain ratios were 0.949, 0.830 and 0.......794 respectively. There was no significant difference between AUROCs of strain histograms and strain ratios (P = 0.405), while they were both inferior to BI-RADS scoring (P0.001, P = 0.008). Four out of 26 BI-RADS 3 tumours were malignant. When cut-offs of 189 for strain histograms and 1.44 for strain ratios were...... used to upgrade BI-RADS 3 tumours, AUROCS were 0.961 (Strain histograms and BIRADS) and 0.941 (Strain ratios and BI-RADS). None of them was significantly different from BI-RADS scoring alone (P = 0.249 and P = 0.414). Tumour size and depth, and breast density influenced neither strain histograms (P = 0...

  8. Solitary waves in morphogenesis: Determination fronts as strain-cued strain transformations among automatous cells

    Science.gov (United States)

    Cox, Brian N.; Landis, Chad M.

    2018-02-01

    We present a simple theory of a strain pulse propagating as a solitary wave through a continuous two-dimensional population of cells. A critical strain is assumed to trigger a strain transformation, while, simultaneously, cells move as automata to tend to restore a preferred cell density. We consider systems in which the strain transformation is a shape change, a burst of proliferation, or the commencement of growth (which changes the shape of the population sheet), and demonstrate isomorphism among these cases. Numerical and analytical solutions describe a strain pulse whose height does not depend on how the strain disturbance was first launched, or the rate at which the strain transformation is achieved, or the rate constant in the rule for the restorative cell motion. The strain pulse is therefore very stable, surviving the imposition of strong perturbations: it would serve well as a timing signal in development. The automatous wave formulation is simple, with few model parameters. A strong case exists for the presence of a strain pulse during amelogenesis. Quantitative analysis reveals a simple relationship between the velocity of the leading edge of the pulse in amelogenesis and the known speed of migration of ameloblast cells. This result and energy arguments support the depiction of wave motion as an automatous cell response to strain, rather than as a response to an elastic energy gradient. The theory may also contribute to understanding the determination front in somitogenesis, moving fronts of convergent-extension transformation, and mitotic wavefronts in the syncytial drosophila embryo.

  9. Clostridium thermosaccharolyticum strain deficient in acetate production

    Energy Technology Data Exchange (ETDEWEB)

    Rothstein, D.M.

    1986-01-01

    A mutant of Clostridium thermosaccharolyticum that is blocked in acetate production was isolated after treatment with nitrosoguanidine and selection for fluoroacetate resistance. The mutant produced more ethanol than the parent strain did.

  10. Five challenges in modelling interacting strain dynamics

    Directory of Open Access Journals (Sweden)

    Paul S. Wikramaratna

    2015-03-01

    Full Text Available Population epidemiological models where hosts can be infected sequentially by different strains have the potential to help us understand many important diseases. Researchers have in recent years started to develop and use such models, but the extra layer of complexity from multiple strains brings with it many technical challenges. It is therefore hard to build models which have realistic assumptions yet are tractable. Here we outline some of the main challenges in this area. First we begin with the fundamental question of how to translate from complex small-scale dynamics within a host to useful population models. Next we consider the nature of so-called “strain space”. We describe two key types of host heterogeneities, and explain how models could help generate a better understanding of their effects. Finally, for diseases with many strains, we consider the challenge of modelling how immunity accumulates over multiple exposures.

  11. Characterization of 3 Strains of Yersinia Pestis

    National Research Council Canada - National Science Library

    Kournikakis, B

    2000-01-01

    .... Antibiotic sensitivities showed that the 3 strains were sensitive to aminoglycosides, the cephalosporins/ cephams, most of the beta lactams/penicillins (e.g. ampicillin) and quinolones (e.g. ciprofloxacin...

  12. Strain sensing technology for high temperature applications

    Science.gov (United States)

    Williams, W. Dan

    1993-01-01

    This review discusses the status of strain sensing technology for high temperature applications. Technologies covered are those supported by NASA such as required for applications in hypersonic vehicles and engines, advanced subsonic engines, as well as material and structure development. The applications may be at temperatures of 540 C (1000 F) to temperatures in excess of 1400 C (2500 F). The most promising technologies at present are the resistance strain gage and remote sensing schemes. Resistance strain gages discussed include the BCL gage, the LaRC compensated gage, and the PdCr gage. Remote sensing schemes such as laser based speckle strain measurement, phase-shifling interferometry, and x-ray extensometry are discussed. Present status and limitations of these technologies are presented.

  13. Flexoelectricity: strain gradient effects in ferroelectrics

    Energy Technology Data Exchange (ETDEWEB)

    Ma Wenhui [Department of Physics, Shantou Unversity, Shantou, Guangdong 515063 (China)

    2007-12-15

    Mechanical strain gradient induced polarization effect or flexoelectricity in perovskite-type ferroelectric and relaxor ferroelectric ceramics was investigated. The flexoelectric coefficients measured at room temperature ranged from about 1 {mu} C m{sup -1} for lead zirconate titanate to 100 {mu} C m{sup -1} for barium strontium titanate. Flexoelectric effects were discovered to be sensitive to chemical makeup, phase symmetry, and domain structures. Based on phenomenological discussion and experimental data on flexoelectricity, the present study proposed that mechanical strain gradient field could influence polarization responses in a way analogous to electric field. Flexoelectric coefficients were found to be nonlinearly enhanced by dielectric permittivity and strain gradient. Interfacial mismatch in epitaxial thin films can give rise to high strain gradients, enabling flexoelectric effects to make a significant impact in properly engineered ferroelectric heterostructure systems.

  14. Flexoelectricity: strain gradient effects in ferroelectrics

    International Nuclear Information System (INIS)

    Ma Wenhui

    2007-01-01

    Mechanical strain gradient induced polarization effect or flexoelectricity in perovskite-type ferroelectric and relaxor ferroelectric ceramics was investigated. The flexoelectric coefficients measured at room temperature ranged from about 1 μ C m -1 for lead zirconate titanate to 100 μ C m -1 for barium strontium titanate. Flexoelectric effects were discovered to be sensitive to chemical makeup, phase symmetry, and domain structures. Based on phenomenological discussion and experimental data on flexoelectricity, the present study proposed that mechanical strain gradient field could influence polarization responses in a way analogous to electric field. Flexoelectric coefficients were found to be nonlinearly enhanced by dielectric permittivity and strain gradient. Interfacial mismatch in epitaxial thin films can give rise to high strain gradients, enabling flexoelectric effects to make a significant impact in properly engineered ferroelectric heterostructure systems

  15. Energy Harvesting Wireless Strain Networks, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Prime Research LC (PPLC) and Virginia Tech (VT) propose to develop an energy harvesting wireless strain node technology that utilizes single-crystal piezoelectric...

  16. Characterization of 21 Strains of Bacillus Anthracis

    National Research Council Canada - National Science Library

    Kournikakis, B

    2000-01-01

    Twenty-one strains of Bacillus anthracis currently held in the culture collection at DRES were characterized by colonial morphology, antibiotic sensitivity and BiologTM metabolic identification profiles...

  17. Poliovirus strain characterization: a WHO Memorandum*

    OpenAIRE

    1980-01-01

    Reliable laboratory techniques for the intratypic characterization of poliovirus types 1, 2, and 3 isolates have an important role in the epidemiological surveillance of poliomyelitis and in studies of the safety and efficacy of poliovirus vaccines. Of the techniques available for poliovirus strain characterization, those potentially most useful are intratypic serodifferentiation and the biochemical techniques. The value of strain-specific (absorbed) antisera for antigenic characterization of...

  18. Anterior Cruciate Ligament Strain In Vivo

    Science.gov (United States)

    Luque-Seron, Juan Antonio; Medina-Porqueres, Ivan

    2016-01-01

    Context: Distinct exercises have been proposed for knee rehabilitation after anterior cruciate ligament (ACL) reconstruction. There is a need to understand ACL strain behavior during different rehabilitation exercises to protect the graft from excessive strain that could interfere with its healing process. Objective: To critically review studies that directly measured normal ACL strain in vivo during different movements, conditions, or exercises to gain insight into which of them may produce more strain on the ligament or the ligament graft in the case of reconstructed knees. Data Sources: A literature search of PubMed, CINAHL, SPORTDiscus, and PEDro databases was conducted. Keywords included anterior cruciate ligament, strain, stress, deformation, transducer, rehabilitation, rehabilitation exercise, physical therapy, and physiotherapy. Study Selection: Inclusion criteria were (1) peer-reviewed studies published in English or Spanish, (2) research conducted on adult human subjects with normal ACLs and healthy knees, and (3) ACL strain directly measured during different movements, conditions, or exercises by using a transducer. Study Design: Systematic review. Level of Evidence: Level 4. Data Extraction: Specific data were abstracted from the selected studies, including isometric quadriceps and hamstrings activity, active and passive flexion-extension of the knee, closed kinetic chain exercises, and application of joint compressive load. Results: A total of 10 studies met all criteria and were included in the final analysis. The strain values produced by closed kinetic chain and open kinetic chain exercises were similar. However, closed kinetic chain exercises appear to attenuate the strain increase that occurs in open kinetic chain exercises when increasing resistance. Conclusion: These data may be relevant to develop rehabilitation exercises or programs that do not endanger the healing ACL graft and to provide a basis for future clinical trials. PMID:27418161

  19. [Antigenic relations of several strains of Naegleria].

    Science.gov (United States)

    Zubiaur, E; Alonso, P

    1987-02-01

    In previous papers different aspects of one strain of Naegleria lovaniensis (Aq/9/1/45D) and two strains of N. gruberi (1518/le and 1518/lf) have been studied. From the results obtained it can be concluded that each strain behaves differently; no more similarities have been found between both N. gruberi strains, than between each of these and N. lovaniensis. Such an event has prompted us to characterize their antigenic relationships by means of an immunoprecipitation assay (double diffusion in plate). Each antiserum was tested against the different antigenic extracts. For N. lovaniensis, besides the whole extract, two fractions (particulate and soluble) and their respective antisera were assayed separately. No reaction occurred between any of the anti-N. lovaniensis sera and either of the two N. gruberi extracts. The antiserum to N. gruberi 1518/lf reacted only with its homologue and with N. lovaniensis antigens. Both N. lovaniensis fractions share some antigenic components being more complex the antigenic structure of the soluble fraction. Therefore no more similarities occur between both N. gruberi strains than between each one and N. lovaniensis, rather N. gruberi 1518/le exhibits more antigenic relationships with N. lovaniensis than with 1518/lf strains. In view of such results the species N. gruberi should be taxonomically reconsidered, criterium shared by other authors.

  20. ACTIVE PRODUCERS OF PEROXIDASE BASIDIOMYCETES STRAINS SCREENING

    Directory of Open Access Journals (Sweden)

    T. E. Voloshko

    2013-10-01

    Full Text Available The paper is devoted to the analysis of the research data peroxidase activity of the strains of xylotrophic basidiomycetes in the dynamics of the growth. The objects of study were 57 strains, 5 of which belongs to 5 species of the order Polyporales, and 52 of which belongs to 7 species of the order Agaricales. In order to search for active producers of peroxidase the strains were cultured by the surface method in a liquid glucosepeptone medium. The accumulation of oven-dry biomass was determined by the weight method. The content of soluble protein and peroxidase activity were determined by the spectrophotometry. The studies set the level of accumulation of oven-dry biomass and peroxidase activity of the strains in 9 and 12 days of growth. The results allowed selecting the strains, which are characterized by high levels of peroxidase activity in mycelium and in the culture filtrate, including Agrocybe cylindracea 167, Pleurotus ostreatus Р-кл, Agrocybe cylindracea 960 and 218. These strains which are active producers of peroxidase may be used in the enzyme preparations obtaining technology.

  1. Strain-controlled electrocatalysis on multimetallic nanomaterials

    Science.gov (United States)

    Luo, Mingchuan; Guo, Shaojun

    2017-11-01

    Electrocatalysis is crucial for the development of clean and renewable energy technologies, which may reduce our reliance on fossil fuels. Multimetallic nanomaterials serve as state-of-the-art electrocatalysts as a consequence of their unique physico-chemical properties. One method of enhancing the electrocatalytic performance of multimetallic nanomaterials is to tune or control the surface strain of the nanomaterials, and tremendous progress has been made in this area in the past decade. In this Review, we summarize advances in the introduction, tuning and quantification of strain in multimetallic nanocrystals to achieve more efficient energy conversion by electrocatalysis. First, we introduce the concept of strain and its correlation with other key physico-chemical properties. Then, using the electrocatalytic reduction of oxygen as a model reaction, we discuss the underlying mechanisms behind the strain-adsorption-reactivity relationship based on combined classical theories and models. We describe how this knowledge can be harnessed to design multimetallic nanocrystals with optimized strain to increase the efficiency of oxygen reduction. In particular, we highlight the unexpectedly beneficial (and previously overlooked) role of tensile strain from multimetallic nanocrystals in improving electrocatalysis. We conclude by outlining the challenges and offering our perspectives on the research directions in this burgeoning field.

  2. Strain rate measurement by Electronic Speckle Pattern Interferometry: A new look at the strain localization onset

    Energy Technology Data Exchange (ETDEWEB)

    Guelorget, Bruno [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France)]. E-mail: bruno.guelorget@utt.fr; Francois, Manuel [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France); Vial-Edwards, Cristian [Departemento de Ingenieria Mecanica y Metalurgica, Pontificia Universidad Catolica de Chile, Vicuna Mackenna 4860, 6904411 Santiago (Chile); Montay, Guillaume [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France); Daniel, Laurent [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France); Lu, Jian [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France)

    2006-01-15

    In-plane Electronic Speckle Pattern Interferometry has been successfully used during tensile testing of semi-hard copper sheets in order to measure the strain rate. On one hand, heterogeneity in strain rate field has been found before the maximum of the tensile force ({epsilon} {sup t} {approx_equal} 19.4 and 25.4%, respectively). Thus, a localization phenomenon occurs before the classic Considere's criterion (dF = 0) for the diffuse neck initiation. On the other hand, strain rate measurement before fracture shows the moment where one of the two slip band systems becomes predominant, then strain concentrates in a small area, the shear band. Uncertainty evaluation has been carried out, which shows a very good accuracy of the total strain and the strain rate measurements.

  3. Immunity raised by recent European subtype 1 PRRSV strains allows better replication of East European subtype 3 PRRSV strain Lena than that raised by an older strain

    DEFF Research Database (Denmark)

    Trus, Ivan; Frydas, Ilias S.; Reddy, Vishwanatha R. A. P.

    2016-01-01

    Stable spatial distribution of porcine reproductive and respiratory syndrome (PRRSV)-1 subtypes in Europe is accompanied by a strong population immunity induced by local PRRSV strains. In the present study, it was examined if the immunity induced by three West European subtype 1 PRRSV strains (2007...... antigenically divergent subtype 3 strains. The lower protection level elicited by recently isolated subtype 1 PRRSV strains may impair the outcome of the spatial expansion of subtype 3 strains from East Europe to West Europe. ...

  4. Complete Genome Sequence of Rat Cytomegalovirus Strain ALL-03 (Malaysian Strain)

    Science.gov (United States)

    Abdullah, Ashwaq Ahmed; Camalxaman, Siti Nazrina; Quah, Yi Wan; Abba, Yusuf; Hani, Homayoun; Loh, Hwei San; Kamal, Farina Mustaffa; Zeenathul, Nazariah Allaudin; Aini, Ideris; Omar, A. R.; Noordin, Mohamed Mustapha; Mohd Azmi, Mohd Lila

    2015-01-01

    The complete genome sequence of the ALL-03 strain of rat cytomegalovirus (RCMV) has been determined. The RCMV genome has a length of 197,958 bp and is arranged as a single unique sequence flanked by 504-bp terminal direct repeats. This strain is closely related to the English strain of RCMV in terms of genetic arrangement but differs slightly in size. PMID:26044413

  5. Intramyocardial strain estimation from cardiac cine MRI.

    Science.gov (United States)

    Elnakib, Ahmed; Beache, Garth M; Gimel'farb, Georgy; El-Baz, Ayman

    2015-08-01

    Functional strain is one of the important clinical indicators for the quantification of heart performance and the early detection of cardiovascular diseases, and functional strain parameters are used to aid therapeutic decisions and follow-up evaluations after cardiac surgery. A comprehensive framework for deriving functional strain parameters at the endocardium, epicardium, and mid-wall of the left ventricle (LV) from conventional cine MRI data was developed and tested. Cine data were collected using short TR-/TE-balanced steady-state free precession acquisitions on a 1.5T Siemens Espree scanner. The LV wall borders are segmented using a level set-based deformable model guided by a stochastic force derived from a second-order Markov-Gibbs random field model that accounts for the object shape and appearance features. Then, the mid-wall of the segmented LV is determined based on estimating the centerline between the endocardium and epicardium of the LV. Finally, a geometrical Laplace-based method is proposed to track corresponding points on successive myocardial contours throughout the cardiac cycle in order to characterize the strain evolutions. The method was tested using simulated phantom images with predefined point locations of the LV wall throughout the cardiac cycle. The method was tested on 30 in vivo datasets to evaluate the feasibility of the proposed framework to index functional strain parameters. The cine MRI-based model agreed with the ground truth for functional metrics to within 0.30 % for indexing the peak systolic strain change and 0.29 % (per unit time) for indexing systolic and diastolic strain rates. The method was feasible for in vivo extraction of functional strain parameters. Strain indexes of the endocardium, mid-wall, and epicardium can be derived from routine cine images using automated techniques, thereby improving the utility of cine MRI data for characterization of myocardial function. Unlike traditional texture-based tracking, the

  6. Polarization Charge Density in Strained Graphene

    Science.gov (United States)

    Wilson, Noah

    Graphene, the world's first truly two-dimensional material, is unique for having an electronic structure described by an effective Lorentz invariant theory. One important consequence is that the ratio or Coulomb energy to kinetic energy is a constant, depending only on conditions within the lattice rather than on the average charge density as in a typical Galilean invariant material. Given this unusual property, a natural question would be how do phenomena, such as screening of a Coulomb impurity, happen in graphene? Moreover, how does the addition of uniaxial strain enhance or diminish this behavior? Here I discuss our work to calculate the charge density distribution in a lattice of strained graphene under the effect of an external Coulomb impurity. Graphene can have its band structure significantly altered by the application of uniaxial strain. Two cases are here explored: relatively weak strain at some finite chemical potential, and extreme strain with zero chemical potential. In the first system, the strain induces elliptic Dirac cones, engendering some inherent directionality to graphene's electronic properties that did not exist before. This anisotropy manifests itself in the polarization function, and so too in the screening charge density. A finite chemical potential in this case is necessary for any screening to take place in graphene since, without it, there are no electron states near the Fermi level to polarize. Both in the strained and unstrained case, decaying oscillations known as Friedel oscillations are observed. The result of strain is a multifaceted anisotropy of the charge distribution: the amplitude, frequency, and the position of the first peak in the oscillations are each varied depending on the direction one observes. In the second system, extreme strain in graphene leads to a merging of Dirac cones, yielding a transition to a new energy spectrum. This band structure is unusual in that it becomes quadratic along the direction of strain

  7. Variation in the strain anisotropy of Zircaloy with temperature and strain

    International Nuclear Information System (INIS)

    Hindle, E.D.; Worswick, D.

    1984-04-01

    Strain anisotropy was investigated at temperatures in the range 293 to 1117K in circular tensile specimens prepared from rolled Zircaloy-2 plate so that their tensile axes were parallel to and transverse to the rolling direction. The strain anisotropy factor for both types of specimen increased markedly in the high alpha phase region above 923K reaching a maximum at circa 1070K. Above this temperature in the alpha-plus-beta phase region the strain anisotropy decreased rapidly as the proportion of beta phase increased and was almost non-existent at 1173K. The strain anisotropy was markedly strain dependent, particularly in the high alpha phase region. The study was extended to Zircaloy-4 pressurized water reactor (PWR) 17 x 17 type fuel rod tubing specimens which were strained under biaxial conditions using cooling conditions which promoted uniform diametral strain over most of their lengths (circa 250 mm). In these circumstances the strain anisotropy is manifest by a reduction in length. Measurement of this change along with that in diameter and wall thickness produced data from which the strain anisotropy factor was calculated. The results, although influenced by additional factors discussed in the paper, were similar to those observed in the uniaxial Zircaloy-2 tensile tests. (author)

  8. Pathogenicity of rabies viruses isolated in China: two fixed strains and a street strain.

    Science.gov (United States)

    Huang, Ying; Tang, Qing; Rayner, Simon; Gong, Kai; Song, Bo; Liang, Guo Dong

    2013-07-01

    To investigate the virulence characteristics of two fixed strains (CTN and aG) and a street strain (HN10) of rabies viruses isolated in China. ICR mice of different age groups were inoculated with CTN, aG and HN10 rabies virus strains via the intracracerebral (i.c.) or intramuscular (i.m.) routes, and observed for 20 days. The CTN strain was pathogenic to 7-day-old suckling mice that received i.c. inoculations and 3-day-old suckling mice that received i.m. inoculations. The aG strain was pathogenic to 4-week-old mice that received i.c. inoculations and 7-day-old suckling mice that received i.m. inoculations. The HN10 strain was pathogenic to mice of all age groups via both inoculation routes. In moribund mice, the viruses had spread to most regions of the brain. The CTN and HN10 strains had similar dissemination patterns in the brain; both viral antigens could be found in the dentate gyrus (DG), whereas few viral antigens were present in the DG from specimens that had been infected with the aG strain. A comprehensive sequence analysis of the G protein suggested that differences in gene sequences may be responsible for producing strain-specific differences in pathogenicity and distribution in the brain. Copyright © 2013 The Editorial Board of Biomedical and Environmental Sciences. Published by China CDC. All rights reserved.

  9. Effects of the Strain Rate Sensitivity and Strain Hardening on the Saturated Impulse of Plates

    Directory of Open Access Journals (Sweden)

    Ling Zhu

    Full Text Available Abstract This paper studies the stiffening effects of the material strain rate sensitivity and strain hardening on the saturated impulse of elastic, perfectly plastic plates. Finite element (FE code ABAQUS is employed to simulate the elastoplastic response of square plates under rectangular pressure pulse. Rigid-plastic analyses for saturated impulse, which consider strain rate sensitivity and strain hardening, are conducted. Satisfactory agreement between the finite element models (FEM and predictions of the rigid-plastic analysis is obtained, which verifies that the proposed rigid-plastic methods are effective to solve the problem including strain rate sensitivity and strain hardening. The quantitative results for the scale effect of the strain rate sensitivity are given. The results for the stiffening effects suggest that two general stiffening factors n 1 and n 2, which characterizes the strain rate sensitivity and strain hardening effect, respectively can be defined. The saturated displacement is inversely proportional to the stiffening factors (i.e. n 1 and n 2 and saturated impulse is inversely proportional to the square roots of the stiffening factors (i.e. n 1 and n 2. Formulae for displacement and saturated impulse are proposed based on the empirical analysis.

  10. Dynamic strains for earthquake source characterization

    Science.gov (United States)

    Barbour, Andrew J.; Crowell, Brendan W

    2017-01-01

    Strainmeters measure elastodynamic deformation associated with earthquakes over a broad frequency band, with detection characteristics that complement traditional instrumentation, but they are commonly used to study slow transient deformation along active faults and at subduction zones, for example. Here, we analyze dynamic strains at Plate Boundary Observatory (PBO) borehole strainmeters (BSM) associated with 146 local and regional earthquakes from 2004–2014, with magnitudes from M 4.5 to 7.2. We find that peak values in seismic strain can be predicted from a general regression against distance and magnitude, with improvements in accuracy gained by accounting for biases associated with site–station effects and source–path effects, the latter exhibiting the strongest influence on the regression coefficients. To account for the influence of these biases in a general way, we include crustal‐type classifications from the CRUST1.0 global velocity model, which demonstrates that high‐frequency strain data from the PBO BSM network carry information on crustal structure and fault mechanics: earthquakes nucleating offshore on the Blanco fracture zone, for example, generate consistently lower dynamic strains than earthquakes around the Sierra Nevada microplate and in the Salton trough. Finally, we test our dynamic strain prediction equations on the 2011 M 9 Tohoku‐Oki earthquake, specifically continuous strain records derived from triangulation of 137 high‐rate Global Navigation Satellite System Earth Observation Network stations in Japan. Moment magnitudes inferred from these data and the strain model are in agreement when Global Positioning System subnetworks are unaffected by spatial aliasing.

  11. Strain preservation of experimental animals: vitrification of two-cell stage embryos for multiple mouse strains.

    Science.gov (United States)

    Eto, Tomoo; Takahashi, Riichi; Kamisako, Tsutomu

    2015-04-01

    Strain preservation of experimental animals is crucial for experimental reproducibility. Maintaining complete animal strains, however, is costly and there is a risk for genetic mutations as well as complete loss due to disasters or illness. Therefore, the development of effective vitrification techniques for cryopreservation of multiple experimental animal strains is important. We examined whether a vitrification method using cryoprotectant solutions, P10 and PEPeS, is suitable for preservation of multiple inbred and outbred mouse strains. First, we investigated whether our vitrification method using cryoprotectant solutions was suitable for two-cell stage mouse embryos. In vitro development of embryos exposed to the cryoprotectant solutions was similar to that of fresh controls. Further, the survival rate of the vitrified embryos was extremely high (98.1%). Next, we collected and vitrified two-cell stage embryos of 14 mouse strains. The average number of embryos obtained from one female was 7.3-33.3. The survival rate of vitrified embryos ranged from 92.8% to 99.1%, with no significant differences among mouse strains. In vivo development did not differ significantly between fresh controls and vitrified embryos of each strain. For strain preservation using cryopreserved embryos, two offspring for inbred lines and one offspring for outbred lines must be produced from two-cell stage embryos collected from one female. The expected number of surviving fetuses obtained from embryos collected from one female of either the inbred or outbred strains ranged from 2.9 to 19.5. The findings of the present study indicated that this vitrification method is suitable for strain preservation of multiple mouse strains. Copyright © 2015 The Authors. Published by Elsevier Inc. All rights reserved.

  12. Novel distributed strain sensing in polymeric materials

    International Nuclear Information System (INIS)

    Abot, Jandro L; Song, Yi; Medikonda, Sandeep; Rooy, Nathan; Schulz, Mark J

    2010-01-01

    Monitoring the state of strain throughout an entire structure is essential to determine its state of stress, detect potential residual stresses after fabrication, and also to help to establish its integrity. Several sensing technologies are presently available to determine the strain in the surface or inside a structure. Large sensor dimensions, complex signal conditioning equipment, and difficulty in achieving a widely distributed system have however hindered their development into robust structural health monitoring techniques. Recently, carbon nanotube forests were spun into a microscale thread that is electrically conductive, tough, and easily tailorable. The thread was integrated into polymeric materials and used for the first time as a piezoresistive sensor to monitor strain and also to detect damage in the material. It is revealed that the created self-sensing polymeric materials are sensitive to normal strains above 0.07% and that the sensor thread exhibits a perfectly linear delta resistance–strain response above 0.3%. The longitudinal gauge factors were determined to be in the 2–5 range. This low cost and simple built-in sensor thread may provide a new integrated and distributed sensor technology that enables robust real-time health monitoring of structures

  13. Brittle superconducting magnets: an equivilent strain model

    International Nuclear Information System (INIS)

    Barzi, E.; Danuso, M.

    2010-01-01

    To exceed fields of 10 T in accelerator magnets, brittle superconductors like A15 Nb 3 Sn and Nb 3 Al or ceramic High Temperature Superconductors have to be used. For such brittle superconductors it is not their maximum tensile yield stress that limits their structural resistance as much as strain values that provoke deformations in their delicate lattice, which in turn affect their superconducting properties. Work on the sensitivity of Nb 3 Sn cables to strain has been conducted in a number of stress states, including uniaxial and multi-axial, producing usually different results. This has made the need of a constituent design criterion imperative for magnet builders. In conventional structural problems an equivalent stress model is typically used to verify mechanical soundness. In the superconducting community a simple scalar equivalent strain to be used in place of an equivalent stress would be an extremely useful tool. As is well known in fundamental mechanics, there is not one single way to reduce a multiaxial strain state as represented by a 2nd order tensor to a scalar. The conceptual experiment proposed here will help determine the best scalar representation to use in the identification of an equivalent strain model.

  14. Haemophilus influenzae Strains in Tunisian Children

    Directory of Open Access Journals (Sweden)

    Mzilem Sabrine

    2017-11-01

    Full Text Available Background: Haemophilus influenzae, a major pathogen causing respiratory tract infections and meningitis, is becoming increasingly resistant to narrow spectrum penicillin. Investigating the reasons for this resistance is challenging. Methods: The sequences of the ftsI gene, encoding the transpeptidase domain of penicillin binding protein (PBP3, were determined for 44 strains of Haemophilus influenzae with reduced susceptibility to β-lactam antibiotics. Strains, isolated from children, were analyzed for genetic relationship by pulsed-field gel electrophoresis (PFGE. Results: Sequence analysis of the ftsI gene revealed different mutations. We used this polymorphism to classify the different strains into three groups: (I (n=3, II (n=36, including H. influenzae ATCC 49247, this group was divided into four subgroups and III (n=5. In each group various substitutions were observed. Conclusion: The increasing number of Haemophilus influenzae strains with reduced susceptibility to β-lactam due to mutations in the ftsI gene, is becoming a serious health issue in Tunisia. The resistance to β-lactam was observed in both strains that produce β-lactamase and those that do not. The level of resistance is remarkably high in our country.

  15. Genomics of Clostridium botulinum group III strains.

    Science.gov (United States)

    Sakaguchi, Yoshihiko; Suzuki, Tomonori; Yamamoto, Yumiko; Nishikawa, Atsushi; Oguma, Keiji

    2015-05-01

    In Clostridium botulinum, the characteristics of type C and D strains are quite different from other types, and they are classified as group III. They produce C2 binary toxin and C3 exoenzyme in addition to type C and D neurotoxins. Two different phages and many plasmids are identified in the organisms. The genes of neurotoxin and C3 exoenzyme are converted from toxigenic strains to non-toxigenic strains by the specific bacteriophages (phages), whereas, the C2 toxin gene is carried by large or small plasmids. Classification of type C and D strains has been in confusion because 1) antigenicity of type C and D neurotoxins is complex, 2) the cells produce two types of toxins, neurotoxin and C2 toxin, and 3) some non-toxigenic strains can be converted to produce C or D neurotoxin by the infection with phages. Until now, entire nucleotide sequences of cell chromosomes, phages, and plasmids have been determined. Since both genetic and protein-chemical analyses have been clarifying the above confusions, these data are reviewed historically. Copyright © 2014 Institut Pasteur. Published by Elsevier Masson SAS. All rights reserved.

  16. Probiotic features of Lactobacillus plantarum mutant strains.

    Science.gov (United States)

    Bove, Pasquale; Gallone, Anna; Russo, Pasquale; Capozzi, Vittorio; Albenzio, Marzia; Spano, Giuseppe; Fiocco, Daniela

    2012-10-01

    In this study, the probiotic potential of Lactobacillus plantarum wild-type and derivative mutant strains was investigated. Bacterial survival was evaluated in an in vitro system, simulating the transit along the human oro-gastro-intestinal tract. Interaction with human gut epithelial cells was studied by assessing bacterial adhesive ability to Caco-2 cells and induction of genes involved in innate immunity. L. plantarum strains were resistant to the combined stress at the various steps of the simulated gastrointestinal tract. Major decreases in the viability of L. plantarum cells were observed mainly under drastic acidic conditions (pH ≤ 2.0) of the gastric compartment. Abiotic stresses associated to small intestine poorly affected bacterial viability. All the bacterial strains significantly adhered to Caco-2 cells, with the ΔctsR mutant strain exhibiting the highest adhesion. Induction of immune-related genes resulted higher upon incubation with heat-inactivated bacteria rather than with live ones. For specific genes, a differential transcriptional pattern was observed upon stimulation with different L. plantarum strains, evidencing a possible role of the knocked out bacterial genes in the modulation of host cell response. In particular, cells from Δhsp18.55 and ΔftsH mutants strongly triggered immune defence genes. Our study highlights the relevance of microbial genetic background in host-probiotic interaction and might contribute to identify candidate bacterial genes and molecules involved in probiosis.

  17. Brittle superconducting magnets: an equivilent strain model

    Energy Technology Data Exchange (ETDEWEB)

    Barzi, E.; /Fermilab; Danuso, M.

    2010-08-01

    To exceed fields of 10 T in accelerator magnets, brittle superconductors like A15 Nb{sub 3}Sn and Nb{sub 3}Al or ceramic High Temperature Superconductors have to be used. For such brittle superconductors it is not their maximum tensile yield stress that limits their structural resistance as much as strain values that provoke deformations in their delicate lattice, which in turn affect their superconducting properties. Work on the sensitivity of Nb{sub 3}Sn cables to strain has been conducted in a number of stress states, including uniaxial and multi-axial, producing usually different results. This has made the need of a constituent design criterion imperative for magnet builders. In conventional structural problems an equivalent stress model is typically used to verify mechanical soundness. In the superconducting community a simple scalar equivalent strain to be used in place of an equivalent stress would be an extremely useful tool. As is well known in fundamental mechanics, there is not one single way to reduce a multiaxial strain state as represented by a 2nd order tensor to a scalar. The conceptual experiment proposed here will help determine the best scalar representation to use in the identification of an equivalent strain model.

  18. Crack initiation under generalized plane strain conditions

    International Nuclear Information System (INIS)

    Shum, D.K.M.; Merkle, J.G.

    1991-01-01

    A method for estimating the decrease in crack-initiation toughness, from a reference plane strain value, due to positive straining along the crack front of a circumferential flaw in a reactor pressure vessel is presented in this study. This method relates crack initiation under generalized plane strain conditions with material failure at points within a distance of a few crack-tip-opening displacements ahead of a crack front, and involves the formulation of a micromechanical crack-initiation model. While this study is intended to address concerns regarding the effects of positive out-of- plane straining on ductile crack initiation, the approach adopted in this work can be extended in a straightforward fashion to examine conditions of macroscopic cleavage crack initiation. Provided single- parameter dominance of near-tip fields exists in the flawed structure, results from this study could be used to examine the appropriateness of applying plane strain fracture toughness to the evaluation of circumferential flaws, in particular to those in ring-forged vessels which have no longitudinal welds. In addition, results from this study could also be applied toward the analysis of the effects of thermal streaming on the fracture resistance of circumferentially oriented flaws in a pressure vessel. 37 refs., 8 figs., 1 tab

  19. Methodology to measure strains at high temperatures using electrical strain gages with free filaments

    International Nuclear Information System (INIS)

    Atanazio Filho, Nelson N.; Gomes, Paulo T. Vida; Scaldaferri, Denis H.B.; Silva, Luiz L. da; Rabello, Emerson G.; Mansur, Tanius R.

    2013-01-01

    An experimental methodology used for strains measuring at high temperatures is show in this work. In order to do the measurements, it was used electric strain gages with loose filaments attached to a stainless steel 304 beam with specific cements. The beam has triangular shape and a constant thickness, so the strain is the same along its length. Unless the beam surface be carefully prepared, the strain gage attachment is not efficient. The showed results are for temperatures ranging from 20 deg C to 300 deg C, but the experimental methodology could be used to measure strains at a temperature up to 900 deg C. Analytical calculations based on solid mechanics were used to verify the strain gage electrical installation and the measured strains. At a first moment, beam deformations as a temperature function were plotted. After that, beam deformations with different weighs were plotted as a temperature function. The results shown allowed concluding that the experimental methodology is trustable to measure strains at temperatures up to 300 deg C. (author)

  20. Thermal strain measurement of EAST W/Cu divertor structure using electric resistance strain gauges

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Xingli [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Science Island Branch of Graduate School, University of Science & Technology of China, Hefei, 230031 (China); Wang, Wanjing, E-mail: wjwang@ipp.ac.cn [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Wang, Jichao [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Wei, Ran; Sun, Zhaoxuan [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Science Island Branch of Graduate School, University of Science & Technology of China, Hefei, 230031 (China); Li, Qiang; Xie, Chunyi [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Chen, Hong-En; Wang, Kaiqiang; Wu, Lei; Chen, Zhenmao [State Key Lab for Strength and Vibration of Mechanical Structures, Xi’an Jiaotong University (China); Luo, Guang-Nan [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei, 230031 (China); Science Island Branch of Graduate School, University of Science & Technology of China, Hefei, 230031 (China); Hefei Center for Physical Science and Technology, Hefei, 230022 (China); Hefei Science Center of Chinese Academy of Sciences, Hefei, 230027 (China)

    2016-12-15

    Highlights: • To understand the service behavior of W/Cu divertor, an electrical resistance strain gauge system had been introduced in a thermal strain measurement experiment. • The measurement system successfully finished the experiment and obtained valued thermal strain data. • Two thermomechanical analyses had also been carried out and compared with the measurement results. • Experiment results corresponded well to simulations and threw a light upon the failure of W/Cu divertor in the previous baking tests. - Abstract: W/Cu divertor has complex structure and faces extreme work environment in EAST Tokamak device. To measure its thermal strain shall be a valued way to understand its service behavior and then optimize its design and manufacturing process. This work presents a preliminary study on measuring thermal strain of EAST W/Cu divertor structure using electric resistance strain gauges. Eight gauges had been used in the experiment and the heating temperature had been set to 230 °C with respect to the work temperature. To realize the measuring experiment, an appropriate fixing method of gauges in divertor narrow spaces had been taken and tested, which could not only withstand high temperature but also had no damage to the divertor sample. The measurement results were that three gauges showed positive strain while other three showed negative strain after having been compensated, which corresponded to tensile stress and compressed stress respectively. Two thermomechanical simulations had also been carried out and used for comparing with the experiment.

  1. Validation of perceptual strain index to evaluate the thermal strain in experimental hot conditions

    Directory of Open Access Journals (Sweden)

    Habibollah Dehghan

    2015-01-01

    Conclusions: The research findings showed when there is no access to other forms of methods to evaluate the heat stress, it can be used the PeSI in evaluating the strain because of its favorable correlation with the thermal strain.

  2. Mechanical properties of biaxially strained poly(L-lactide) tubes: Strain rate and temperature dependence

    DEFF Research Database (Denmark)

    Løvdal, Alexandra Liv Vest; Andreasen, Jens Wenzel; Mikkelsen, Lars Pilgaard

    2017-01-01

    Poly(l-lactide) (PLLA) is a bioabsorbable polymer with high stiffness and strength compared to the other commercially available bioabsorbable polymers. The properties of PLLA can be improved by straining, causing deformation-mediated molecular orientation. PLLA tubes were biaxially strained above...

  3. Residual strains in girth-welded linepipe

    International Nuclear Information System (INIS)

    MacEwen, S.R.; Holden, T.M.; Powell, B.M.; Lazor, R.B.

    1987-07-01

    High resolution neutron diffraction has been used to measure the axial residual strains in and adjacent to a multipass girth weld in a complete section of 914 mm (36 inches) diameter, 16 mm (5/8 inch) wall, linepipe. The experiments were carried out at the NRU reactor, Chalk River using the L3 triple-axis spectrometer. The through-wall distribution of axial residual strain was measured at 0, 4, 8, 20 and 50 mm from the weld centerline; the axial variation was determined 1, 5, 8, and 13 mm from the inside surface of the pipe wall. The results have been compared with strain gauge measurements on the weld surface and with through-wall residual stress distributions determined using the block-layering and removal technique

  4. MWCNTs based flexible and stretchable strain sensors

    Science.gov (United States)

    Khan, Saeed Ahmed; Gao, Min; Zhu, Yuechang; Yan, Zhuocheng; Lin, Yuan

    2017-06-01

    Carbon nanotubes have potential applications in flexible and stretchable devices due to their remarkable electromechanical properties. Flexible and stretchable strain sensors of multi-walled carbon nanotubes (MWCNTs) with aligned or random structures were fabricated on poly-dimethylsiloxane (PDMS) substrate with different techniques. It was observed that the spraycoatedtechniquebased strain sensor fabricated on PDMS substrate showed higher sensitivity higher stretchability, better linearity and excellent longer time stability than the sensor fabricated with other methods presented in this work. The scanning electron microscopy images indicated the spray coating technique can produce a better uniform and compact CNT network, which is the important role affecting the performance of CNT-based flexible strain sensors. Project supported by the National Basic Research Program of China (No. 2015CB351905), the National Natural Science Foundation of China (No. 61306015), the Technology Innovative Research Team of Sichuan Province of China (No.2015TD0005), and “111” Project (No. B13042)

  5. Long-term crustal strength: Strain vs. strain-rate weakening

    Science.gov (United States)

    Ruh, Jonas B.

    2017-04-01

    In compressional systems, stress build-up in the continental crust is subject to horizontal forces. Upper differential stress thresholds in the Earth's crust are defined by the strength of brittle faults or ductile shear zones, depending of their rheological behavior. The longevity of such high strain rate zones is their mechanical weakness relative to surrounding, undeformed rocks. Whether weakening of brittle faults depends on accumulated strain (e.g., grain size reduction), strain rate (e.g., shear heating), or other effects is debated. I use a two-dimensional numerical code with a visco-elasto-plastic/brittle rheology to investigate the influence of strain and strain-rate weakening (often referred to as velocity weakening) on the long-term stress evolution of compressed continental crust. One of the main goals is to show whether average differential stresses remain similar during the formation of orogenic-scale fault zones of whether they occur in pulses.

  6. The asymptomatic bacteriuria Escherichia coli strain 83972 outcompetes uropathogenic E. coli strains in human urine

    DEFF Research Database (Denmark)

    Hancock, Viktoria; Ulett, G.C.; Schembri, M.A.

    2006-01-01

    Escherichia coli is the most common organism associated with asymptomatic bacteriuria (ABU). In contrast to uropathogenic E. coli (UPEC), which causes symptomatic urinary tract infections (UTI), very little is known about the mechanisms by which these strains colonize the human urinary tract....... The prototype ABU E. coli strain 83972 was originally isolated from a girl who had carried it asymptomatically for 3 years. Deliberate colonization of UTI-susceptible individuals with E. coli 83972 has been used successfully as an alternative approach for the treatment of patients who are refractory...... to conventional therapy. Colonization with strain 83972 appears to prevent infection with UPEC strains in such patients despite the fact that this strain is unable to express the primary adhesins involved in UTI, viz. P and type 1 fimbriae. Here we investigated the growth characteristics of E. coli 83972 in human...

  7. Nucleation versus instability race in strained films

    Science.gov (United States)

    Liu, Kailang; Berbezier, Isabelle; David, Thomas; Favre, Luc; Ronda, Antoine; Abbarchi, Marco; Voorhees, Peter; Aqua, Jean-Noël

    2017-10-01

    Under the generic term "Stranski-Krastanov" are grouped two different growth mechanisms of SiGe quantum dots. They result from the self-organized Asaro-Tiller-Grinfel'd (ATG) instability at low strain, while at high strain, from a stochastic nucleation. While these regimes are well known, we elucidate here the origin of the transition between these two pathways thanks to a joint theoretical and experimental work. Nucleation is described within the master equation framework. By comparing the time scales for ATG instability development and three-dimensional (3D) nucleation onset, we demonstrate that the transition between these two regimes is simply explained by the crossover between their divergent evolutions. Nucleation exhibits a strong exponential deviation at low strain while ATG behaves only algebraically. The associated time scale varies with exp(1 /x4) for nucleation, while it only behaves as 1 /x8 for the ATG instability. Consequently, at high (low) strain, nucleation (instability) occurs faster and inhibits the alternate evolution. It is then this different kinetic evolution which explains the transition from one regime to the other. Such a kinetic view of the transition between these two 3D growth regimes was not provided before. The crossover between nucleation and ATG instability is found to occur both experimentally and theoretically at a Ge composition around 50% in the experimental conditions used here. Varying the experimental conditions and/or the system parameters does not allow us to suppress the transition. This means that the SiGe quantum dots always grow via ATG instability at low strain and nucleation at high strain. This result is important for the self-organization of quantum dots.

  8. Autochthonous fungal strains with high ligninolytic activities from ...

    African Journals Online (AJOL)

    These fungal strains were first screened for lignin-modifying enzymes on solid media containing Poly R-478 or ABTS. Of the 315 tested strains, 49 exhibited significant ABTS-oxidation activity, expressed within the first week of incubation and only 18 strains decolourised the Poly R-478. These positive strains were further ...

  9. Comparative developmental trajectory of four strains of chicken ...

    African Journals Online (AJOL)

    This study evaluated egg traits, embryonic growth, and early growth rate in four strains of chicken. A total of 1200 hatching eggs, 300 each from four strains of chicken were used for this study. The strains included Nigerian indigenous chicken (NIC), Arbor acre, Hubbard, and Marshall broiler strains. Embryonic weights, yolk ...

  10. Ultrasound strain mapping of Achilles tendon compressive strain patterns during dorsiflexion.

    Science.gov (United States)

    Chimenti, Ruth L; Flemister, A Samuel; Ketz, John; Bucklin, Mary; Buckley, Mark R; Richards, Michael S

    2016-01-04

    Heel lifts are commonly prescribed to patients with Achilles tendinopathy, yet little is known about the effect on tendon compressive strain. The purposes of the current study were to (1) develop a valid and reliable ultrasound elastography technique and algorithm to measure compressive strain of human Achilles tendon in vivo, (2) examine the effects of ankle dorsiflexion (lowering via controlled removal of a heel lift and partial squat) on compressive strain of the Achilles tendon insertion and (3) examine the relative compressive strain between the deep and superficial regions of the Achilles tendon insertion. All tasks started in a position equivalent to standing with a 30mm heel lift. An ultrasound transducer positioned over the Achilles tendon insertion was used to capture radiofrequency images. A non-rigid image registration-based algorithm was used to estimate compressive strain of the tendon, which was divided into 2 regions (superficial, deep). The bland-Altman test and intraclass correlation coefficient were used to test validity and reliability. One-way repeated measures ANOVA was used to compare compressive strain between regions and across tasks. Compressive strain was accurately and reliably (ICC>0.75) quantified. There was greater compressive strain during the combined task of lowering and partial squat compared to the lowering (P=.001) and partial squat (P<.001) tasks separately. There was greater compressive strain in the deep region of the tendon compared to the superficial for all tasks (P=.001). While these findings need to be examined in a pathological population, heel lifts may reduce tendon compressive strain during daily activities. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Cells as strain-cued automata

    Science.gov (United States)

    Cox, Brian N.; Snead, Malcolm L.

    2016-02-01

    We argue in favor of representing living cells as automata and review demonstrations that autonomous cells can form patterns by responding to local variations in the strain fields that arise from their individual or collective motions. An autonomous cell's response to strain stimuli is assumed to be effected by internally-generated, internally-powered forces, which generally move the cell in directions other than those implied by external energy gradients. Evidence of cells acting as strain-cued automata have been inferred from patterns observed in nature and from experiments conducted in vitro. Simulations that mimic particular cases of pattern forming share the idealization that cells are assumed to pass information among themselves solely via mechanical boundary conditions, i.e., the tractions and displacements present at their membranes. This assumption opens three mechanisms for pattern formation in large cell populations: wavelike behavior, kinematic feedback in cell motility that can lead to sliding and rotational patterns, and directed migration during invasions. Wavelike behavior among ameloblast cells during amelogenesis (the formation of dental enamel) has been inferred from enamel microstructure, while strain waves in populations of epithelial cells have been observed in vitro. One hypothesized kinematic feedback mechanism, "enhanced shear motility", accounts successfully for the spontaneous formation of layered patterns during amelogenesis in the mouse incisor. Directed migration is exemplified by a theory of invader cells that sense and respond to the strains they themselves create in the host population as they invade it: analysis shows that the strain fields contain positional information that could aid the formation of cell network structures, stabilizing the slender geometry of branches and helping govern the frequency of branch bifurcation and branch coalescence (the formation of closed networks). In simulations of pattern formation in

  12. Tensile strain mapping in flat germanium membranes

    Energy Technology Data Exchange (ETDEWEB)

    Rhead, S. D., E-mail: S.Rhead@warwick.ac.uk; Halpin, J. E.; Myronov, M.; Patchett, D. H.; Allred, P. S.; Wilson, N. R.; Leadley, D. R. [Department of Physics, University of Warwick, Coventry, CV4 7AL (United Kingdom); Shah, V. A. [Department of Physics, University of Warwick, Coventry, CV4 7AL (United Kingdom); Department of Engineering, University of Warwick, Coventry, CV4 7AL (United Kingdom); Kachkanov, V.; Dolbnya, I. P. [Diamond Light Source, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE (United Kingdom); Reparaz, J. S. [ICN2 - Institut Catala de Nanociencia i Nanotecnologia, Campus UAB, 08193 Bellaterra (Barcelona) (Spain); Sotomayor Torres, C. M. [ICN2 - Institut Catala de Nanociencia i Nanotecnologia, Campus UAB, 08193 Bellaterra (Barcelona) (Spain)

    2014-04-28

    Scanning X-ray micro-diffraction has been used as a non-destructive probe of the local crystalline quality of a thin suspended germanium (Ge) membrane. A series of reciprocal space maps were obtained with ∼4 μm spatial resolution, from which detailed information on the strain distribution, thickness, and crystalline tilt of the membrane was obtained. We are able to detect a systematic strain variation across the membranes, but show that this is negligible in the context of using the membranes as platforms for further growth. In addition, we show evidence that the interface and surface quality is improved by suspending the Ge.

  13. Tensile strain mapping in flat germanium membranes

    International Nuclear Information System (INIS)

    Rhead, S. D.; Halpin, J. E.; Myronov, M.; Patchett, D. H.; Allred, P. S.; Wilson, N. R.; Leadley, D. R.; Shah, V. A.; Kachkanov, V.; Dolbnya, I. P.; Reparaz, J. S.; Sotomayor Torres, C. M.

    2014-01-01

    Scanning X-ray micro-diffraction has been used as a non-destructive probe of the local crystalline quality of a thin suspended germanium (Ge) membrane. A series of reciprocal space maps were obtained with ∼4 μm spatial resolution, from which detailed information on the strain distribution, thickness, and crystalline tilt of the membrane was obtained. We are able to detect a systematic strain variation across the membranes, but show that this is negligible in the context of using the membranes as platforms for further growth. In addition, we show evidence that the interface and surface quality is improved by suspending the Ge

  14. Strain measurement by diffraction at LANSCE

    Science.gov (United States)

    Bourke, M. A. M.; Goldstone, J. A.; Robinson, R. A.

    1994-07-01

    Residual strains affect the structural integrity of components during both fabrication and service and consequently industrial manufacturers routinely invest considerable effort in their characterization and control. Neutron diffraction has proved to be a unique technique for non-destructive strain measurement within crystalline solids. The technique is achieving recognition but is limited by lack of beam time and compromises involved in using instruments designed for powder diffraction. This paper summarizes its importance, lists the capabilities of the Los Alamos (pulsed) neutron scattering center (LANSCE) and briefly describes a concept for a dedicated instrument.

  15. Giant flexoelectric effect through interfacial strain relaxation.

    Science.gov (United States)

    Lee, Daesu; Noh, Tae Won

    2012-10-28

    Interfacial strain gradients in oxide epitaxial thin films provide an interesting opportunity to study flexoelectric effects and their potential applications. Oxide epitaxial thin films can exhibit giant and tunable flexoelectric effects, which are six or seven orders of magnitude larger than those in conventional bulk solids. The strain gradient in an oxide epitaxial thin film can generate an electric field above 1 MV m(-1) by flexoelectricity, large enough to affect the physical properties of the film. Giant flexoelectric effects on ferroelectric properties are discussed in this overview of recent experimental observations.

  16. Industrial Application of Artificially Induced Diploid Strains of Torulaspora delbrueckii

    OpenAIRE

    Ohshima, Yoshinobu; Sugaura, Toshio; Horita, Munehiro; Sasaki, Takashi

    1987-01-01

    Diploid strains of Torulaspora delbrueckii were tested for industrial application. Because the cell volume of the diploid strain was three times as large as that of the parental haploid strain, collection and subsequent dehydration to make compressed yeast cakes were greatly improved with the diploid YL3. The time required for dehydration of the diploid strain was shortened to 1/2.5 that of the parent strain under conventional conditions. Moreover, for the diploid cells frequent filter change...

  17. Genetic analysis of poliovirus strains isolated from sewage in Poland.

    Science.gov (United States)

    Kuryk, Ł; Wieczorek, M; Diedrich, S; Böttcher, S; Witek, A; Litwińska, B

    2014-07-01

    The study describes genetic characterization of poliovirus (PV) strains isolated from sewage samples in Poland. The analyses were performed for the detection of any putative polio revertants and recombinants in three genomic regions by sequencing analysis. Thirty-six strains were analyzed. The analyzed strains were identified by neutralization assay as 7 strains of serotype P1, 10 strains of serotype P2, and 19 strains of serotype P3. Sewage isolates were sequenced in 5'UTR, VP1, and 3D genomic regions. All detected PVs were classified as vaccine strains on the basis of VP1 sequence. Mutational differences in the VP1 sequences of isolated viruses ranged from 0.0% to 0.4%, indicating a limited replication period. The genetic analysis of the 3D region showed that some strains have recombinant genomes. Nine strains were found as dipartite recombinants (seven strains--S3/S2, one strain--S2/S1, one strain--S3/S1), while one strain was found as tripartite recombinant (S3/S2/S1). No recombinants with non-PV enteroviruses were identified. None of wild-type PVs or vaccine-derived polioviruses (VDPVs) were detected. This study showed the absence of wild or VDPV circulation in the country and demonstrated the usefulness of environmental surveillance in addition to acute flaccid paralysis (AFP) surveillance in support of polio eradication initiatives. © 2013 Wiley Periodicals, Inc.

  18. Probiotic Potential of Lactobacillus Strains with Antimicrobial Activity against Some Human Pathogenic Strains

    Directory of Open Access Journals (Sweden)

    Parisa Shokryazdan

    2014-01-01

    Full Text Available The objective of this study was to isolate, identify, and characterize some lactic acid bacterial strains from human milk, infant feces, and fermented grapes and dates, as potential probiotics with antimicrobial activity against some human pathogenic strains. One hundred and forty bacterial strains were isolated and, after initial identification and a preliminary screening for acid and bile tolerance, nine of the best isolates were selected and further identified using 16 S rRNA gene sequences. The nine selected isolates were then characterized in vitro for their probiotic characteristics and their antimicrobial activities against some human pathogens. Results showed that all nine isolates belonged to the genus Lactobacillus. They were able to tolerate pH 3 for 3 h, 0.3% bile salts for 4 h, and 1.9 mg/mL pancreatic enzymes for 3 h. They exhibited good ability to attach to intestinal epithelial cells and were not resistant to the tested antibiotics. They also showed good antimicrobial activities against the tested pathogenic strains of humans, and most of them exhibited stronger antimicrobial activity than the reference strain L. casei Shirota. Thus, the nine Lactobacillus strains could be considered as potential antimicrobial probiotic strains against human pathogens and should be further studied for their human health benefits.

  19. Probiotic Potential of Lactobacillus Strains with Antimicrobial Activity against Some Human Pathogenic Strains

    Science.gov (United States)

    Shokryazdan, Parisa; Sieo, Chin Chin; Kalavathy, Ramasamy; Liang, Juan Boo; Alitheen, Noorjahan Banu; Faseleh Jahromi, Mohammad; Ho, Yin Wan

    2014-01-01

    The objective of this study was to isolate, identify, and characterize some lactic acid bacterial strains from human milk, infant feces, and fermented grapes and dates, as potential probiotics with antimicrobial activity against some human pathogenic strains. One hundred and forty bacterial strains were isolated and, after initial identification and a preliminary screening for acid and bile tolerance, nine of the best isolates were selected and further identified using 16 S rRNA gene sequences. The nine selected isolates were then characterized in vitro for their probiotic characteristics and their antimicrobial activities against some human pathogens. Results showed that all nine isolates belonged to the genus Lactobacillus. They were able to tolerate pH 3 for 3 h, 0.3% bile salts for 4 h, and 1.9 mg/mL pancreatic enzymes for 3 h. They exhibited good ability to attach to intestinal epithelial cells and were not resistant to the tested antibiotics. They also showed good antimicrobial activities against the tested pathogenic strains of humans, and most of them exhibited stronger antimicrobial activity than the reference strain L. casei Shirota. Thus, the nine Lactobacillus strains could be considered as potential antimicrobial probiotic strains against human pathogens and should be further studied for their human health benefits. PMID:25105147

  20. Genomic comparison between attenuated Chinese equine infectious anemia virus vaccine strains and their parental virulent strains.

    Science.gov (United States)

    Wang, Xuefeng; Wang, Shuai; Lin, Yuezhi; Jiang, Chenggang; Ma, Jian; Zhao, Liping; Lv, Xiaoling; Wang, Fenglong; Shen, Rongxian; Kong, Xiangang; Zhou, Jianhua

    2011-02-01

    A lentiviral vaccine, live attenuated equine infectious anemia virus (EIAV) vaccine, was developed in the 1970s, and this has made tremendous contributions to the control of equine infectious anemia (EIA) in China. Four key virus strains were generated during the attenuation of the EIAV vaccine: the original Liao-Ning strain (EIAV(LN40)), a donkey-adapted virulent strain (EIAV(DV117)), a donkey-leukocyte-attenuated vaccine strain (EIAV(DLV121)), and a fetal donkey dermal cell (FDD)-adapted vaccine strain (EIAV(FDDV13)). In this study, we analyzed the proviral genomes of these four EIAV strains and found a series of consensus substitutions among these strains. These mutations provide useful information for understanding the genetic basis of EIAV attenuation. Our results suggest that multiple mutations in a variety of genes in our attenuated EIAV vaccines not only provide a basis for virulence attenuation and induction of protective immunity but also greatly reduce the risk of reversion to virulence.

  1. Electronic and optical properties of strained graphene and other strained 2D materials: a review

    Science.gov (United States)

    Naumis, Gerardo G.; Barraza-Lopez, Salvador; Oliva-Leyva, Maurice; Terrones, Humberto

    2017-09-01

    This review presents the state of the art in strain and ripple-induced effects on the electronic and optical properties of graphene. It starts by providing the crystallographic description of mechanical deformations, as well as the diffraction pattern for different kinds of representative deformation fields. Then, the focus turns to the unique elastic properties of graphene, and to how strain is produced. Thereafter, various theoretical approaches used to study the electronic properties of strained graphene are examined, discussing the advantages of each. These approaches provide a platform to describe exotic properties, such as a fractal spectrum related with quasicrystals, a mixed Dirac-Schrödinger behavior, emergent gravity, topological insulator states, in molecular graphene and other 2D discrete lattices. The physical consequences of strain on the optical properties are reviewed next, with a focus on the Raman spectrum. At the same time, recent advances to tune the optical conductivity of graphene by strain engineering are given, which open new paths in device applications. Finally, a brief review of strain effects in multilayered graphene and other promising 2D materials like silicene and materials based on other group-IV elements, phosphorene, dichalcogenide- and monochalcogenide-monolayers is presented, with a brief discussion of interplays among strain, thermal effects, and illumination in the latter material family.

  2. Bacillus thuringiensis strain NG, a Novel Isolated Strain for production of Various Polyhydroxyalkanoates

    Directory of Open Access Journals (Sweden)

    Nazila Gholamveisi

    2017-12-01

    Full Text Available Introduction: Microbial biopolymers such as polyhydroxyalkanoates (PHA are proper alternatives for petroleum-derived plastics. These biopolymers have many advantages over conventional plastics such as biodegradability, environmental friendly and infinite as a renewable resource. Therefore, our study was aimed to isolate a bacterial strain capable of producing polyhydroxybutyrate (PHB; a highly applicable type of PHA. Materials and methods: To this aim, a total of 6 PHA-producing bacteria were isolated from waste water exit site of a brewery factory. The 6 isolates were studied by Sudan black-staining technique and the most stained isolate was selected for further studies. Next, the selected isolate was identified based on morphological, biochemical and phylogenetic analyses. Finally, the ability of strain in producing PHB as well as other PHAs was analyzed via GC-MS technique. Results: Strain NG had the highest yield of PHB, according to Sudan black-staining technique and it was selected for further studies. The strain NG was identified as a new strain of Bacillus thuringiensis. According to GC-MS results, this strain was able to produce PHB as well as 4 other PHAs including hexadecanoic acid methyl ester, octadecanoic acid methyl ester, tetradecanoic acid methyl ester, 8-octadecenoic acid methyl ester. Discussion and conclusion: It was the first report on producing various PHAs at the same time by a strain of Bacillus thuringiensis.

  3. Nanoscale patterning induced strain redistribution in ultrathin strained Si layers on oxide.

    Science.gov (United States)

    Moutanabbir, O; Reiche, M; Hähnel, A; Erfurth, W; Gösele, U; Motohashi, M; Tarun, A; Hayazawa, N; Kawata, S

    2010-04-02

    We present a comparative study of the influence of the thickness on the strain behavior upon nanoscale patterning of ultrathin strained Si layers directly on oxide. The strained layers were grown on a SiGe virtual substrate and transferred onto a SiO(2)/Si substrate using wafer bonding and hydrogen ion induced exfoliation. The post-patterning strain was evaluated using UV micro-Raman spectroscopy for thin (20 nm) and thick (60 nm) nanostructures with lateral dimensions in the range of 80-400 nm. We found that about 40-50% of the initial strain is maintained in the 20 nm thick nanostructures, whereas this fraction drops significantly to approximately 2-20% for the 60 nm thick ones. This phenomenon of free surface induced relaxation is described using detailed three-dimensional finite element simulations. The simulated strain 3D maps confirm the limited relaxation in thin nanostructures. This result has direct implications for the fabrication and manipulation of strained Si nanodevices.

  4. Phenotypic variability among strains of Pasteurella multocida ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-05-02

    May 2, 2008 ... strains producing a toxin similar to the dermonecrotic toxin of. Pasteurella multocida subspecies multocida. Vet. Rec. 126: 434 -. 437. Madsen EB, Bisgaard M, Mutters R, Pedersen KB (1985). Charac- terization of Pasteurella species isolated from the lungs of calves with pneumonia, Can. J. Comp. Med.

  5. Performance assessment of indigenously developed FBG strain ...

    Indian Academy of Sciences (India)

    studies it is found that, these FBG sensors are suitable in health monitoring of civil engineering structures. ... a very long time under complex conditions, thus their constant monitoring is pivotal to prevent catastrophe and ensure ..... Two self straining frames were specially designed and fabricated for this study and the instru-.

  6. Strain rate behavior of magnetorheological materials

    International Nuclear Information System (INIS)

    Seminuk, Kenneth; Joshi, Vasant; Gump, Jared; Stoltz, Chad; Forbes, Jerry

    2014-01-01

    Strain rate response of two Hydroxyl-terminated Polybutadiene/ Iron (HTPB/Fe) compositions under electromagnetic fields has been investigated using a Split Hopkinson Pressure bar arrangement equipped with aluminum bars. Two HTPB/Fe compositions were developed, the first without plasticizer and the second containing plasticizer. Samples were tested with and without the application of a 0.01 Tesla magnetic field. Strain gauge data taken from the Split Hopkinson Pressure Bar has been used to determine the extent of change in mechanical properties by inducing a mild electromagnetic field onto each sample. Raw data from strain gages was processed using commercial software (Signo) and Excel spreadsheet. It is of particular interest to determine whether the mechanical properties of binder systems can be manipulated by adding ferrous or Magnetostrictive particulates. Data collected from the Split Hopkinson Pressure bar indicate changes in the Mechanical Stress-Strain curves and suggest that the impedance of a binder system can be altered by means of a magnetic field.

  7. Strained Si engineering for nanoscale MOSFETs

    International Nuclear Information System (INIS)

    Park, Jea-Gun; Lee, Gon-Sub; Kim, Tae-Hyun; Hong, Seuck-Hoon; Kim, Seong-Je; Song, Jin-Hwan; Shim, Tae-Hun

    2006-01-01

    We have revealed a strain relaxation mechanism for strained Si grown on a relaxed SiGe-on-insulator structure fabricated by the bonding, dislocation sink, or condensation method. Strain relaxation for both the bonding and dislocation sink methods was achieved by grading the Ge concentration; in contrast, the relaxation for the condensation method was achieved through Ge atom condensation during oxidation. In addition, we estimated the surface roughness and threading-dislocation pit density for relaxed SiGe layer fabricated by the bonding, dislocation sink, or condensation method. The surface roughness and threading-dislocation pit density for the bonding, dislocation sink, and condensation methods were 2.45, 0.46, and 0.40 nm and 5.0 x 10 3 , 9 x 10 3 , and 0, respectively. In terms of quality and cost-effectiveness, the condensation method was superior to the bonding and dislocation sink methods for forming strained Si on a relaxed SiGe-on-insulator structure

  8. Evolution and Strain Variation in BCG

    KAUST Repository

    Abdallah, Abdallah

    2017-11-07

    BCG vaccines were derived by in vitro passage, during the years 1908–1921, at the Pasteur Institute of Lille. Following the distribution of stocks of BCG to vaccine production laboratories around the world, it was only a few decades before different BCG producers recognized that there were variants of BCG, likely due to different passaging conditions in the different laboratories. This ultimately led to the lyophilization of stable BCG products in the 1950s and 1960s, but not before considerable evolution of the different BCG strains had taken place. The application of contemporary research methodologies has now revealed genomic, transcriptomic and proteomic differences between BCG strains. These molecular differences in part account for phenotypic differences in vitro between BCG strains, such as their variable secretion of antigenic proteins. Yet, the relevance of BCG variability for immunization policy remains elusive. In this chapter we present an overview of what is known about BCG evolution and its resulting strain variability, and provide some speculation as to the potential relevance for a vaccine given to over 100 million newborns each year.

  9. Effective stress coefficient for uniaxial strain condition

    DEFF Research Database (Denmark)

    Alam, M.M.; Fabricius, I.L.

    2012-01-01

    one dimensional rock mechanical deformation. We further investigated the effect of boundary condition on the stress dependency of effective stress coefficient and discussed its application in reservoir study. As stress field in the reservoirs are most unlikely to be hydrostatic, effective stress...... determined under uniaxial strain condition will be more relevant in reservoir studies. Copyright 2012 ARMA, American Rock Mechanics Association....

  10. Carbon dioxide (CO2) utilizing strain database

    African Journals Online (AJOL)

    Jane

    2011-10-17

    Oct 17, 2011 ... CSD can be used to gain information related to CO2 fixing microbes. It can also contribute to devising biological strategies for reducing carbon dioxide from the environment. It introduces an innovative idea of exploring the potential of these bacterial strains for reversing global warming. The CSD can be.

  11. Thermal Strain Analysis of Optic Fiber Sensors

    Directory of Open Access Journals (Sweden)

    Chih-Ying Huang

    2013-01-01

    Full Text Available An optical fiber sensor surface bonded onto a host structure and subjected to a temperature change is analytically studied in this work. The analysis is developed in order to assess the thermal behavior of an optical fiber sensor designed for measuring the strain in the host structure. For a surface bonded optical fiber sensor, the measuring sensitivity is strongly dependent on the bonding characteristics which include the protective coating, adhesive layer and the bonding length. Thermal stresses can be generated due to a mismatch of thermal expansion coefficients between the optical fiber and host structure. The optical fiber thermal strain induced by the host structure is transferred via the adhesive layer and protective coating. In this investigation, an analytical expression of the thermal strain and stress in the optical fiber is presented. The theoretical predictions are validated using the finite element method. Numerical results show that the thermal strain and stress are linearly dependent on the difference in thermal expansion coefficients between the optical fiber and host structure and independent of the thermal expansion coefficients of the adhesive and coating.

  12. Strain promoted conductivity of doped carbon nanotubes

    Science.gov (United States)

    Kuo, Hsin-Fu; Hsu, Ching-Tung; Lien, Der-Hsien; Syue, Sen-Hong; Kao, Yin-Shen; Li, Ching-Chen; Li, Yi-Fan; Chin, Wei; Chang, Shih-Chin; Wei, Bee-Yu; Hsu, Wen-Kuang

    2008-12-01

    Strain promoted conductivity is detected in boron-doped carbon nanotubes and conductance biased at 3.5, 3.8, -4.6, -5.7, and -6.4 V exceeds 0.5G0. Deflection induced degeneracy of BC3-π bands accounts for conductance increment.

  13. Antimicrobial resistance among Brazilian Corynebacterium diphtheriae strains

    Directory of Open Access Journals (Sweden)

    Gabriela Andrade Pereira

    2008-08-01

    Full Text Available The increasing problems with multidrug resistance in relation to Corynebacterium, including C. diphtheriae, are examples of challenges confronting many countries. For this reason, Brazilian C. diphtheriae strains were evaluated by the E-Test for their susceptibility to nine antibacterial drugs used in therapy. Resistance (MIC < 0.002; 0.38 µg/ml to penicillin G was found in 14.8% of the strains tested. Although erythromycin (MIC90 0.75 µg/ml and azithromycin (MIC90 0.064 µg/ml were active against C. diphtheriae in this study, 4.2% of the strains showed decreased susceptibility (MIC 1.0 µg/ml to erythromycin. Multiple resistance profiles were determined by the disk diffusion method using 31 antibiotics. Most C. diphtheriae strains (95.74% showed resistance to mupirocin, aztreonam, ceftazidime, and/or oxacillin, ampicillin, penicillin, tetracycline, clindamycin, lincomycin, and erythromycin. This study presents the antimicrobial susceptibility profiles of Brazilian C. diphtheriae isolates. The data are of value to practitioners, and suggest that some concern exists regarding the use of penicillin.

  14. Shape and coarsening dynamics of strained islands

    DEFF Research Database (Denmark)

    Schifani, Guido; Frisch, Thomas; Argentina, Mederic

    2016-01-01

    We investigate the formation and the coarsening dynamics of islands in a strained epitaxial semiconductor film. These islands are commonly observed in thin films undergoing a morphological instability due to the presence of the elastocapillary effect. We first describe both analytically and numer...

  15. (HN1) strain of Aspergillus niger

    African Journals Online (AJOL)

    login123

    2016-09-26

    Sep 26, 2016 ... Tween-20, Tween-80, Tributyrin, Triton-X-100 and glucose were used to investigate their effect on extracellular lipase production by both LPF-5 and HN1 strain. These carbon sources were added individually to the production medium at a constant concentration. (1%, w/v) by replacing the original carbon ...

  16. strains of pseudomonas aeruginosa and bacillus cereus

    African Journals Online (AJOL)

    DR. AMINU

    DETERMINATION OF THE GENETIC MARKER OF THE MUTAGENIZED. STRAINS OF PSEUDOMONAS AERUGINOSA AND BACILLUS CEREUS. ISOLATED FROM EFFLUENT OF PETROLEUM REFINERY. Idise, O. E.1, Ameh, J.B.2 Yakubu, S.E. 2, Okuofu, C.A. 3 and Ado, S.A.2. 1 Department of Microbiology, Delta ...

  17. Adoption of Improved Strain of Backyard Poultry

    Directory of Open Access Journals (Sweden)

    Athi Lakshmy

    2017-09-01

    Full Text Available Backyard poultry plays a major role in alleviating malnutrition in developing countries like India. The present study was undertaken among 120 backyard poultry farmers in Karaikal region of Puducherry an aim to assess the extent of adoption of improved strain of backyard poultry in Karaikal region, a backward area in Puducherry Union Territory. Majority of the respondents were middle aged with primary school level of education belonging to small family group with 6-15 years of experience in backyard poultry rearing. Nearly one third of the respondents had 1-5 birds in their backyard. Majority of the farmers reared desi birds followed by Giriraja strain. The average number of eggs per clutch and the average number of clutches per year were 16 and 6 respectively. Majority of the respondents were aware of the improved strains of backyard poultry. Most of them had discontinued rearing improved strain of backyard poultry mainly due to susceptibility to diseases and attack by predators.

  18. High strain rate behaviour of polypropylene microfoams

    Directory of Open Access Journals (Sweden)

    Martínez A.B.

    2012-08-01

    Full Text Available Microcellular materials such as polypropylene foams are often used in protective applications and passive safety for packaging (electronic components, aeronautical structures, food, etc. or personal safety (helmets, knee-pads, etc.. In such applications the foams which are used are often designed to absorb the maximum energy and are generally subjected to severe loadings involving high strain rates. The manufacture process to obtain polymeric microcellular foams is based on the polymer saturation with a supercritical gas, at high temperature and pressure. This method presents several advantages over the conventional injection moulding techniques which make it industrially feasible. However, the effect of processing conditions such as blowing agent, concentration and microfoaming time and/or temperature on the microstructure of the resulting microcellular polymer (density, cell size and geometry is not yet set up. The compressive mechanical behaviour of several microcellular polypropylene foams has been investigated over a wide range of strain rates (0.001 to 3000 s−1 in order to show the effects of the processing parameters and strain rate on the mechanical properties. High strain rate tests were performed using a Split Hopkinson Pressure Bar apparatus (SHPB. Polypropylene and polyethylene-ethylene block copolymer foams of various densities were considered.

  19. Unpolished Thai Rice Strain of Leum Phua

    African Journals Online (AJOL)

    Erah

    g sample, respectively. Interestingly, phytophenolic chromatogram and anthocyanin pigment levels showed a strong correlation. Conclusion: Oryza sativa, unpolished Thai rice strain of Leum Phua, has high levels of anthocyanin pigment, phenolic content and antioxidant activity. Its pure phytochemical contents should be ...

  20. Preliminary characterization of Rhizobium strains isolated from ...

    African Journals Online (AJOL)

    SERVER

    2008-03-18

    Mar 18, 2008 ... Rhizobium strains from chickpea nodules exercised an antagonism against Ascocyhta rabiei the agent of ascocyhta blight disease of chickpea. Key words: Rhizobium, chickpea (Cicer arietinum L.), preliminary characterization. INTRODUCTION. Chickpea (Cicer arietinum L.) is a major source of protein.

  1. Simple Numerical Simulation of Strain Measurement

    Science.gov (United States)

    Tai, H.

    2002-01-01

    By adopting the basic principle of the reflection (and transmission) of a plane polarized electromagnetic wave incident normal to a stack of films of alternating refractive index, a simple numerical code was written to simulate the maximum reflectivity (transmittivity) of a fiber optic Bragg grating corresponding to various non-uniform strain conditions including photo-elastic effect in certain cases.

  2. Evolution and Strain Variation in BCG.

    Science.gov (United States)

    Abdallah, Abdallah M; Behr, Marcel A

    2017-01-01

    BCG vaccines were derived by in vitro passage, during the years 1908-1921, at the Pasteur Institute of Lille. Following the distribution of stocks of BCG to vaccine production laboratories around the world, it was only a few decades before different BCG producers recognized that there were variants of BCG, likely due to different passaging conditions in the different laboratories. This ultimately led to the lyophilization of stable BCG products in the 1950s and 1960s, but not before considerable evolution of the different BCG strains had taken place. The application of contemporary research methodologies has now revealed genomic, transcriptomic and proteomic differences between BCG strains. These molecular differences in part account for phenotypic differences in vitro between BCG strains, such as their variable secretion of antigenic proteins. Yet, the relevance of BCG variability for immunization policy remains elusive. In this chapter we present an overview of what is known about BCG evolution and its resulting strain variability, and provide some speculation as to the potential relevance for a vaccine given to over 100 million newborns each year.

  3. Characterizing large strain crush response of redwood

    International Nuclear Information System (INIS)

    Cramer, S.M.; Hermanson, J.C.

    1996-12-01

    Containers for the transportation of hazardous and radioactive materials incorporate redwood in impact limiters. Redwood is an excellent energy absorber, but only the most rudimentary information exists on its crush properties. The objectives of the study were to fill the information gap by collecting triaxial load-deformation data for redwood; to use these data to characterize redwood crush, assess current wood failure theories, provide developments toward a complete stress-strain theory for redwood; and to review the literature on strain-rate effects on redwood crush performance. The load-deformation responses of redwood at temperature conditions corresponding to ambient (70 degrees F), 150 degrees F, and -20 degrees F conditions were measured in approximately 100 confined compression tests for crush levels leading to material densification. Data analysis provided a more complete description of redwood crush performance and a basis for assessing proposed general orthotropic stress-strain relationships for redwood. A review of existing literature indicated that strain-rate effects cause at most a 20 percent increase in crush stress parallel to grain

  4. Photoacclimation of cultured strains of the cyanobacterium

    NARCIS (Netherlands)

    Bañares-España, E.; Kromkamp, J.C.; López-Rodas, V.; Costas, E.; Flores-Moya, A.

    2013-01-01

    The cyanobacterium Microcystis aeruginosa forms blooms that can consist of colonies. We have investigated how M.aeruginosa acclimatizes to changing light conditions such as can occur during blooms. Three different strains were exposed to two irradiance levels: lower (LL) and higher (HL) than the

  5. High strain rate behaviour of polypropylene microfoams

    Science.gov (United States)

    Gómez-del Río, T.; Garrido, M. A.; Rodríguez, J.; Arencón, D.; Martínez, A. B.

    2012-08-01

    Microcellular materials such as polypropylene foams are often used in protective applications and passive safety for packaging (electronic components, aeronautical structures, food, etc.) or personal safety (helmets, knee-pads, etc.). In such applications the foams which are used are often designed to absorb the maximum energy and are generally subjected to severe loadings involving high strain rates. The manufacture process to obtain polymeric microcellular foams is based on the polymer saturation with a supercritical gas, at high temperature and pressure. This method presents several advantages over the conventional injection moulding techniques which make it industrially feasible. However, the effect of processing conditions such as blowing agent, concentration and microfoaming time and/or temperature on the microstructure of the resulting microcellular polymer (density, cell size and geometry) is not yet set up. The compressive mechanical behaviour of several microcellular polypropylene foams has been investigated over a wide range of strain rates (0.001 to 3000 s-1) in order to show the effects of the processing parameters and strain rate on the mechanical properties. High strain rate tests were performed using a Split Hopkinson Pressure Bar apparatus (SHPB). Polypropylene and polyethylene-ethylene block copolymer foams of various densities were considered.

  6. Antifungal and antibacterial compounds from Streptomyces strains ...

    African Journals Online (AJOL)

    In addition, antibacterial activity of this strain was determined against human pathogenic bacteria such as. Staphylococcus aureus, Klebsiella pneumoniae, Kocuria ... aureus (MRSA). The present results indicate that isolate KEH23 is a potential antibiotic producer agent for the biocontrol of plant and human pathogens.

  7. Antibiotics resistance of Stenotrophomonas maltophilia strains ...

    African Journals Online (AJOL)

    BD Phoenixautomated microbiology system (Becton Dickinson, USA) was utilized for species level identification and antibiotic susceptibility testing. Results: Sixty seven of S. maltophilia strains were isolated from tracheal aspirate isolates, 17 from blood, 10 from sputum, 10 from wound and 14 from other clinical specimens.

  8. Strain Analysis of the de Mattia Test

    Directory of Open Access Journals (Sweden)

    Reiter M.

    2010-06-01

    Full Text Available The de Mattia test is a well-known, standardized and widely used method in the rubber industry for characterizing the fatigue behaviour of rubbers. Due to the visual observation and classification of the crack initiated, high data scatter were usually observed in these tests. To improve the quality of the de Mattia test and to support the applicability of the test method in modern design procedures, two novel experimental methods were proposed. Full-field strain analysis experiments using digital image correlation technique were performed and the local strains at the notch tip determined in the first. A global displacement vs. local strain calibration curves makes the design and conduction of strain based Wöhler curves possible. The crack initiation and crack growth is detected by an image analysis system and the crack growth rate was determined in the second method. To gain more insight into the fatigue behaviour of rubbers, these two novel methods were combined and can efficiently be used for characterizing the fatigue behaviour of rubbers.

  9. Life Stress, Strain, and Deviance Across Schools: Testing the Contextual Version of General Strain Theory in China.

    Science.gov (United States)

    Zhang, Jinwu; Liu, Jianhong; Wang, Xin; Zou, Anquan

    2017-08-01

    General Strain Theory delineates different types of strain and intervening processes from strain to deviance and crime. In addition to explaining individual strain-crime relationship, a contextualized version of general strain theory, which is called the Macro General Strain Theory, has been used to analyze how aggregate variables influence aggregate and individual deviance and crime. Using a sample of 1,852 students (Level 1) nested in 52 schools (Level 2), the current study tests the Macro General Strain Theory using Chinese data. The results revealed that aggregate life stress and strain have influences on aggregate and individual deviance, and reinforce the individual stress-deviance association. The current study contributes by providing the first Macro General Strain Theory test based on Chinese data and offering empirical evidence for the multilevel intervening processes from strain to deviance. Limitations and future research directions are discussed.

  10. Unsteady Aerodynamic Force Sensing from Measured Strain

    Science.gov (United States)

    Pak, Chan-Gi

    2016-01-01

    A simple approach for computing unsteady aerodynamic forces from simulated measured strain data is proposed in this study. First, the deflection and slope of the structure are computed from the unsteady strain using the two-step approach. Velocities and accelerations of the structure are computed using the autoregressive moving average model, on-line parameter estimator, low-pass filter, and a least-squares curve fitting method together with analytical derivatives with respect to time. Finally, aerodynamic forces over the wing are computed using modal aerodynamic influence coefficient matrices, a rational function approximation, and a time-marching algorithm. A cantilevered rectangular wing built and tested at the NASA Langley Research Center (Hampton, Virginia, USA) in 1959 is used to validate the simple approach. Unsteady aerodynamic forces as well as wing deflections, velocities, accelerations, and strains are computed using the CFL3D computational fluid dynamics (CFD) code and an MSC/NASTRAN code (MSC Software Corporation, Newport Beach, California, USA), and these CFL3D-based results are assumed as measured quantities. Based on the measured strains, wing deflections, velocities, accelerations, and aerodynamic forces are computed using the proposed approach. These computed deflections, velocities, accelerations, and unsteady aerodynamic forces are compared with the CFL3D/NASTRAN-based results. In general, computed aerodynamic forces based on the lifting surface theory in subsonic speeds are in good agreement with the target aerodynamic forces generated using CFL3D code with the Euler equation. Excellent aeroelastic responses are obtained even with unsteady strain data under the signal to noise ratio of -9.8dB. The deflections, velocities, and accelerations at each sensor location are independent of structural and aerodynamic models. Therefore, the distributed strain data together with the current proposed approaches can be used as distributed deflection

  11. Recent advances in echocardiography: strain and strain rate imaging [version 1; referees: 3 approved

    Directory of Open Access Journals (Sweden)

    Oana Mirea

    2016-04-01

    Full Text Available Deformation imaging by echocardiography is a well-established research tool which has been gaining interest from clinical cardiologists since the introduction of speckle tracking. Post-processing of echo images to analyze deformation has become readily available at the fingertips of the user. New parameters such as global longitudinal strain have been shown to provide added diagnostic value, and ongoing efforts of the imaging societies and industry aimed at harmonizing methods will improve the technique further. This review focuses on recent advances in the field of echocardiographic strain and strain rate imaging, and provides an overview on its current and potential future clinical applications.

  12. Strain rate effects for spallation of concrete

    Directory of Open Access Journals (Sweden)

    Häussler-Combe Ulrich

    2015-01-01

    Full Text Available Appropriate triaxial constitutive laws are the key for a realistic simulation of high speed dynamics of concrete. The strain rate effect is still an open issue within this context. In particular the question whether it is a material property – which can be covered by rate dependent stress strain relations – or mainly an effect of inertia is still under discussion. Experimental and theoretical investigations of spallation of concrete specimen in a Hopkinson Bar setup may bring some evidence into this question. For this purpose the paper describes the VERD model, a newly developed constitutive law for concrete based on a damage approach with included strain rate effects [1]. In contrast to other approaches the dynamic strength increase is not directly coupled to strain rate values but related to physical mechanisms like the retarded movement of water in capillary systems and delayed microcracking. The constitutive law is fully triaxial and implemented into explicit finite element codes for the investigation of a wide range of concrete structures exposed to impact and explosions. The current setup models spallation experiments with concrete specimen [2]. The results of such experiments are mainly related to the dynamic tensile strength and the crack energy of concrete which may be derived from, e.g., the velocity of spalled concrete fragments. The experimental results are compared to the VERD model and two further constitutive laws implemented in LS-Dyna. The results indicate that both viscosity and retarded damage are required for a realistic description of the material behaviour of concrete exposed to high strain effects [3].

  13. Vaccine escape of piliated Streptococcus pneumoniae strains.

    Science.gov (United States)

    Regev-Yochay, Gili; Jaber, Hanaa; Hamdan, Ayob; Daana, Muhannad; Nammouz, Hanan; Thalji, Amin; Jaar, Fuad; Abdeen, Ziad; Rubin, Carmit; Huppert, Amit; Raz, Meir; Rahav, Galia

    2016-05-27

    Type1-pilus proteins were suggested as targets of future protein-based vaccines. Here we studied the effect of pneumococcal-conjugate vaccine (PCV7) implementation on the prevalence of piliated strains in a unique study setting which controls for typical confounders; the Palestinian-Israeli Collaborative Research (PICR). Annual cross-sectional surveys of pneumococcal carriage were performed during 2009-2011 among two closely related population that live under different health policies (a) Palestinian-Authority (PA) (n=1773), where PCV7 was not yet introduced (b) East-Jerusalem (EJ) (n=983) where PCV7 was rapidly implemented. Clinical data were collected, pneumococci identified and characterized and the presence of Type1-pilus genes was determined by rrgC PCR. Following PCV7 implementation in EJ, overall carriage prevalence did not change (∼30%), but VT7 strains decreased from 61.5% to 33.8%. While prevalence of non-piliated-VT7 isolates decreased from 37% to 10%, p<0.001, the prevalence of piliated-VT7 strains persisted ∼25%. Additionally, piliated non-VT13 strains emerged (1-15%, p<0.001). These changes were not observed in PA. These dynamics were independent of the bacteria's resistance pattern. A differential effect of PCV7 was observed with a relative resistance of piliated strains to the vaccine. This suggests that Type1-pilus confers an intrinsic advantage for colonization and may be an attractive vaccine target. Copyright © 2016 Elsevier Ltd. All rights reserved.

  14. Colloid straining within saturated heterogeneous porous media.

    Science.gov (United States)

    Porubcan, Alexis A; Xu, Shangping

    2011-02-01

    The transport of 0.46 μm, 2.94 μm, 5.1 μm and 6.06 μm latex particles in heterogeneous porous media prepared from the mixing of 0.78 mm, 0.46 mm and 0.23 mm quartz sands was investigated through column transport experiments. It was observed that the 0.46 μm particles traveled conservatively within the heterogeneous porous media, suggesting that under the experimental conditions employed in this research the strong repulsive interactions between the negatively charged latex particles and the clean quartz sands led to minimal colloid immobilization due to physicochemical filtration. The immobilization of the 2.94 μm, 5.1 μm and 6.06 μm latex particles was thus attributed to colloid straining. Experimental results showed that the straining of colloidal particles within heterogeneous sand mixtures increased when the fraction of finer sands increased. The mathematical model that was developed and tested based on results obtained using uniform sands (Xu et al., 2006) was found to be able to describe colloid straining within heterogeneous porous media. Examination of the relationship between the best-fit values of the clean-bed straining rate coefficients (k(0)) and the ratio of colloid diameter (d(p)) and sand grain size (d(g)) indicated that when number-average sizes were used to represent the size of the heterogeneous porous media, there existed a consistent relationship for both uniform sands and heterogeneous sand mixtures. Similarly, the use of the number-averaged sizes for the heterogeneous porous media produced a uniform relationship between the colloid straining capacity term (λ) and the ratio of d(p)/d(g) for all the sand treatments. © 2010 Elsevier Ltd. All rights reserved.

  15. Informal eldercare and work-related strain.

    Science.gov (United States)

    Trukeschitz, Birgit; Schneider, Ulrike; Mühlmann, Richard; Ponocny, Ivo

    2013-03-01

    In light of an aging workforce, reconciling informal eldercare and paid work becomes increasingly pertinent. This article investigates the association between informal eldercare and work-related strain and tests for both the "competing demands" and "expansion" hypotheses. The sample of 938 Austrian employees consisted of employees caring for older relatives and a control group of employees without eldercare obligations. We ran a Tobit regression model on work-related strain with different measures of informal eldercare as explanatory variables and controls for both personal and workplace characteristics. Accounting for different characteristics of eldercare within one estimation model revealed that informal eldercare was associated with work-related strain in 2 ways, that is, it increased with both care hours and subjective care burden. However, after controlling for these burdensome attributes of eldercare, the carer status as such was found to be negatively associated with work-related strain. In addition and independently of care commitments, work-related factors, such as advanced skills and job motivation, reduced work-related strain. This article lends support to both the "competing demands" and the "expansion" hypotheses. Commitment to eldercare can enhance work-related outcomes but entails work-related problems if care burden and time demands of eldercare are substantial. Thus, workers with eldercare responsibilities cannot be considered less productive from the outset. An individual assessment of their situation, considering the care and work setting, is required. Findings from this study support the design of workplace initiatives to uphold workers' productivity in general and bring specific attention to policies alleviating workers' eldercare burden.

  16. Intermediate strain rate testing methodologies and full-field optical strain measurement techniques for composite materials characterisation

    OpenAIRE

    Longana, M.L.

    2014-01-01

    Two optical full-field strain measurement techniques, Digital Image Correlation and the Grid Method, are applied to characterise the strain-rate dependent constitutive behaviour of composite materials. Optical strain measurement techniques based on full-field images are well established for material characterisation in the quasi-static strain rate region, however in this work they are developed to study the material behaviour at intermediate strain rates, which is relatively unexplored. For t...

  17. Characterization of autochthonous Lactobacillus paracasei strains on potential probiotic ability

    Directory of Open Access Journals (Sweden)

    Zorica Radulović

    2010-06-01

    Full Text Available Lactic acid bacteria strains isolated from traditional made cheeses constitute a reservoir of unexplored potential in biotechnology. In this study four autochthonous lactobacilli strains, isolated from traditional white brined cheeses and identified as Lactobacillus paracasei (08, 564, 05 and 02, were investigated on potential probiotic ability. The investigation comprised sensitivity to simulated gastrointestinal tract conditions, antimicrobial activity against wide range of pathogens, antibiotic resistance as well as autoaggregation ability. Lactobacillus rhamnosus GG was used as referent strain. Three tested strains grew well in simulated gastrointestinal conditions, but their sensitivity was greater on bile acids and pancreatin compared with pepsin low pH 2.5. The examined strains had different sensitivity to antibiotics, but three strains showed very good antimicrobial activity to pathogens. All strains demonstrated very good autoaggregation ability. For three of four examined strains of Lb. paracasei probiotic potential was similar with referent strain Lb. rhamnosus GG, determined in vitro

  18. Unexpected nondenitrifier nitrous oxide reductase gene diversity and abundance in soils.

    Science.gov (United States)

    Sanford, Robert A; Wagner, Darlene D; Wu, Qingzhong; Chee-Sanford, Joanne C; Thomas, Sara H; Cruz-García, Claribel; Rodríguez, Gina; Massol-Deyá, Arturo; Krishnani, Kishore K; Ritalahti, Kirsti M; Nissen, Silke; Konstantinidis, Konstantinos T; Löffler, Frank E

    2012-11-27

    Agricultural and industrial practices more than doubled the intrinsic rate of terrestrial N fixation over the past century with drastic consequences, including increased atmospheric nitrous oxide (N(2)O) concentrations. N(2)O is a potent greenhouse gas and contributor to ozone layer destruction, and its release from fixed N is almost entirely controlled by microbial activities. Mitigation of N(2)O emissions to the atmosphere has been attributed exclusively to denitrifiers possessing NosZ, the enzyme system catalyzing N(2)O to N(2) reduction. We demonstrate that diverse microbial taxa possess divergent nos clusters with genes that are related yet evolutionarily distinct from the typical nos genes of denitirifers. nos clusters with atypical nosZ occur in Bacteria and Archaea that denitrify (44% of genomes), do not possess other denitrification genes (56%), or perform dissimilatory nitrate reduction to ammonium (DNRA; (31%). Experiments with the DNRA soil bacterium Anaeromyxobacter dehalogenans demonstrated that the atypical NosZ is an effective N(2)O reductase, and PCR-based surveys suggested that atypical nosZ are abundant in terrestrial environments. Bioinformatic analyses revealed that atypical nos clusters possess distinctive regulatory and functional components (e.g., Sec vs. Tat secretion pathway in typical nos), and that previous nosZ-targeted PCR primers do not capture the atypical nosZ diversity. Collectively, our results suggest that nondenitrifying populations with a broad range of metabolisms and habitats are potentially significant contributors to N(2)O consumption. Apparently, a large, previously unrecognized group of environmental nosZ has not been accounted for, and characterizing their contributions to N(2)O consumption will advance understanding of the ecological controls on N(2)O emissions and lead to refined greenhouse gas flux models.

  19. Sequence space coverage, entropy of genomes and the potential to detect non-human DNA in human samples

    Directory of Open Access Journals (Sweden)

    Maley Carlo C

    2008-10-01

    Full Text Available Abstract Background Genomes store information for building and maintaining organisms. Complete sequencing of many genomes provides the opportunity to study and compare global information properties of those genomes. Results We have analyzed aspects of the information content of Homo sapiens, Mus musculus, Drosophila melanogaster, Caenorhabditis elegans, Arabidopsis thaliana, Saccharomyces cerevisiae, and Escherichia coli (K-12 genomes. Virtually all possible (> 98% 12 bp oligomers appear in vertebrate genomes while 98% to D. melanogaster (12–17 bp, C. elegans (11–17 bp, A. thaliana (11–17 bp, S. cerevisiae (10–16 bp and E. coli (9–15 bp. Frequencies of unique oligomers in the genomes follow similar patterns. We identified a set of 2.6 M 15-mers that are more than 1 nucleotide different from all 15-mers in the human genome and so could be used as probes to detect microbes in human samples. In a human sample, these probes would detect 100% of the 433 currently fully sequenced prokaryotes and 75% of the 3065 fully sequenced viruses. The human genome is significantly more compact in sequence space than a random genome. We identified the most frequent 5- to 20-mers in the human genome, which may prove useful as PCR primers. We also identified a bacterium, Anaeromyxobacter dehalogenans, which has an exceptionally low diversity of oligomers given the size of its genome and its GC content. The entropy of coding regions in the human genome is significantly higher than non-coding regions and chromosomes. However chromosomes 1, 2, 9, 12 and 14 have a relatively high proportion of coding DNA without high entropy, and chromosome 20 is the opposite with a low frequency of coding regions but relatively high entropy. Conclusion Measures of the frequency of oligomers are useful for designing PCR assays and for identifying chromosomes and organisms with hidden structure that had not been previously recognized. This information may be used to detect

  20. Brucella abortus strain 2308 Wisconsin genome: importance of the definition of reference strains

    Directory of Open Access Journals (Sweden)

    Marcela Suárez-Esquivel

    2016-09-01

    Full Text Available Brucellosis is a bacterial infectious disease affecting a wide range of mammals and a neglected zoonosis caused by species of the genetically homogenous genus Brucella. As in most studies on bacterial diseases, research in brucellosis is carried out by using reference strains as canonical models to understand the mechanisms underlying host pathogen interactions. We performed whole genome sequencing (WGS analysis of the reference strain Brucella abortus 2308 routinely used in our laboratory, including manual curated annotation accessible as an editable version at www.wikipedia.Comparison of this genome with two publically available 2308 genomes showed significant differences, particularly indels related to insertional elements, suggesting variability related to the transposition of these elements within the same strain. Considering the outcome of high resolution genomic techniques in the bacteriology field, the conventional concept of strain definition needs to be revised.

  1. Strain-dependent induction of cytokine profiles in the gut by orally administered Lactobacillus strains

    NARCIS (Netherlands)

    Maassen, C.B.M.; Holten-Neelen, C. van; Balk, F.; Bak-Glashouwer, M.-J.H. den; Leer, R.J.; Laman, J.D.; Boersma, W.J.A.; Claassen, E.

    2000-01-01

    Different Lactobacillus strains are frequently used in consumer food products. In addition, recombinant lactobacilli which contain novel expression vectors can now be used in immunotherapeutic applications such as oral vaccination strategies and in T cell tolerance induction approaches for

  2. Brucella abortus Strain 2308 Wisconsin Genome: Importance of the Definition of Reference Strains

    Science.gov (United States)

    Suárez-Esquivel, Marcela; Ruiz-Villalobos, Nazareth; Castillo-Zeledón, Amanda; Jiménez-Rojas, César; Roop II, R. Martin; Comerci, Diego J.; Barquero-Calvo, Elías; Chacón-Díaz, Carlos; Caswell, Clayton C.; Baker, Kate S.; Chaves-Olarte, Esteban; Thomson, Nicholas R.; Moreno, Edgardo; Letesson, Jean J.; De Bolle, Xavier; Guzmán-Verri, Caterina

    2016-01-01

    Brucellosis is a bacterial infectious disease affecting a wide range of mammals and a neglected zoonosis caused by species of the genetically homogenous genus Brucella. As in most studies on bacterial diseases, research in brucellosis is carried out by using reference strains as canonical models to understand the mechanisms underlying host pathogen interactions. We performed whole genome sequencing analysis of the reference strain B. abortus 2308 routinely used in our laboratory, including manual curated annotation accessible as an editable version through a link at https://en.wikipedia.org/wiki/Brucella#Genomics. Comparison of this genome with two publically available 2308 genomes showed significant differences, particularly indels related to insertional elements, suggesting variability related to the transposition of these elements within the same strain. Considering the outcome of high resolution genomic techniques in the bacteriology field, the conventional concept of strain definition needs to be revised. PMID:27746773

  3. Development of quantitative PCR and metagenomics-based approaches for strain quantification of a defined mixed-strain starter culture.

    Science.gov (United States)

    Johansen, Pernille; Vindeløv, Jannik; Arneborg, Nils; Brockmann, Elke

    2014-05-01

    Although the strain composition of mixed cultures may hugely affect production of various fermented foods, such as e.g. cheese, tools for investigating it have so far been limited. In this study, two new approaches for quantification of seven Lactococcus lactis subsp. cremoris strains (S1-S7) in a defined mixed-strain starter culture were developed and verified. By mapping NGS reads from 47 sequenced L. lactis strains to de novo assembly contigs of the seven strains, two strain-specific sequence regions (SEQ1 and SEQ2) were identified for each strain for qPCR primer design (A1 and A2). The qPCR assays amplified their strain-specific sequence region target efficiently. Additionally, high reproducibility was obtained in a validation sample containing equal amounts of the seven strains, and assay-to-assay coefficients of variance (CVs) for six (i.e. S1, S2, S4-S7) of the seven strains correlated to the inter-plate CVs. Hence, at least for six strains, the qPCR assay design approach was successful. The metagenomics-based approach quantified the seven strains based on average coverage of SEQ1 and SEQ2 by mapping sequencing reads from the validation sample to the strain-specific sequence regions. Average coverages of the SEQ1 and SEQ2 in the metagenomics data showed CVs of ≤17.3% for six strains (i.e. S1-S4, S6, S7). Thus, the metagenomics-based quantification approach was considered successful for six strains, regardless of the strain-specific sequence region used. When comparing qPCR- and metagenomics-based quantifications of the validation sample, the identified strain-specific sequence regions were considered suitable and applicable for quantification at a strain level of defined mixed-strain starter cultures. Copyright © 2014 Elsevier GmbH. All rights reserved.

  4. Robust mutant strain design by pessimistic optimization.

    Science.gov (United States)

    Apaydin, Meltem; Xu, Liang; Zeng, Bo; Qian, Xiaoning

    2017-10-03

    Flux Balance Analysis (FBA) based mathematical modeling enables in silico prediction of systems behavior for genome-scale metabolic networks. Computational methods have been derived in the FBA framework to solve bi-level optimization for deriving "optimal" mutant microbial strains with targeted biochemical overproduction. The common inherent assumption of these methods is that the surviving mutants will always cooperate with the engineering objective by overproducing the maximum desired biochemicals. However, it has been shown that this optimistic assumption may not be valid in practice. We study the validity and robustness of existing bi-level methods for strain optimization under uncertainty and non-cooperative environment. More importantly, we propose new pessimistic optimization formulations: P-ROOM and P-OptKnock, aiming to derive robust mutants with the desired overproduction under two different mutant cell survival models: (1) ROOM assuming mutants have the minimum changes in reaction fluxes from wild-type flux values, and (2) the one considered by OptKnock maximizing the biomass production yield. When optimizing for desired overproduction, our pessimistic formulations derive more robust mutant strains by considering the uncertainty of the cell survival models at the inner level and the cooperation between the outer- and inner-level decision makers. For both P-ROOM and P-OptKnock, by converting multi-level formulations into single-level Mixed Integer Programming (MIP) problems based on the strong duality theorem, we can derive exact optimal solutions that are highly scalable with large networks. Our robust formulations P-ROOM and P-OptKnock are tested with a small E. coli core metabolic network and a large-scale E. coli iAF1260 network. We demonstrate that the original bi-level formulations (ROOM and OptKnock) derive mutants that may not achieve the predicted overproduction under uncertainty and non-cooperative environment. The knockouts obtained by the

  5. A wide extent of inter-strain diversity in virulent and vaccine strains of alphaherpesviruses.

    Science.gov (United States)

    Szpara, Moriah L; Tafuri, Yolanda R; Parsons, Lance; Shamim, S Rafi; Verstrepen, Kevin J; Legendre, Matthieu; Enquist, L W

    2011-10-01

    Alphaherpesviruses are widespread in the human population, and include herpes simplex virus 1 (HSV-1) and 2, and varicella zoster virus (VZV). These viral pathogens cause epithelial lesions, and then infect the nervous system to cause lifelong latency, reactivation, and spread. A related veterinary herpesvirus, pseudorabies (PRV), causes similar disease in livestock that result in significant economic losses. Vaccines developed for VZV and PRV serve as useful models for the development of an HSV-1 vaccine. We present full genome sequence comparisons of the PRV vaccine strain Bartha, and two virulent PRV isolates, Kaplan and Becker. These genome sequences were determined by high-throughput sequencing and assembly, and present new insights into the attenuation of a mammalian alphaherpesvirus vaccine strain. We find many previously unknown coding differences between PRV Bartha and the virulent strains, including changes to the fusion proteins gH and gB, and over forty other viral proteins. Inter-strain variation in PRV protein sequences is much closer to levels previously observed for HSV-1 than for the highly stable VZV proteome. Almost 20% of the PRV genome contains tandem short sequence repeats (SSRs), a class of nucleic acids motifs whose length-variation has been associated with changes in DNA binding site efficiency, transcriptional regulation, and protein interactions. We find SSRs throughout the herpesvirus family, and provide the first global characterization of SSRs in viruses, both within and between strains. We find SSR length variation between different isolates of PRV and HSV-1, which may provide a new mechanism for phenotypic variation between strains. Finally, we detected a small number of polymorphic bases within each plaque-purified PRV strain, and we characterize the effect of passage and plaque-purification on these polymorphisms. These data add to growing evidence that even plaque-purified stocks of stable DNA viruses exhibit limited sequence

  6. Internal residual strain mapping in carburized chrome molybdenum steel after quenching by neutron strain scanning

    International Nuclear Information System (INIS)

    Sakaida, Yoshihisa; Serizawa, Takanobu; Manzanka, Michiya

    2011-01-01

    A hollow circular cylinder specimen with an annular U-notch of chrome molybdenum steel with 0.20 mass% C (SCM420) was carburized in carrier gas and quenched in oil bath. In order to determine the case depth, the specimen was cut off and carbon content and Vickers hardness gradients were measured experimentally near the carburized surface. The residual strain mapping in the interior of carburized cylinder was conducted nondestructively by neutron strain scanning. In this study, the neutron diffraction from Fe-211 plane was used for strain scanning. The neutron wavelength was tuned to 0.1654nm so that diffraction angle became about 90deg. Radial, hoop and axial residual strains were measured by scanning diffracting volume along the axial direction of cylinder specimen. Each residual strain was calculated from lattice spacing change. Unstressed lattice spacing was determined experimentally using reference coupon specimens that were cut from the interior of same carburized cylinder. As a result, the diffraction peak width at half height, FWHM, near the carburized surface was about 3.7 times wider than that of coupon specimens. On the other hand, the most peak widths in the interior equaled to that of coupon specimens. Peak width broadened slightly as the diffracting volume approached the carburized case layer. From the center to the quarter of cylinder specimen, the hoop and axial strains were tensile, and the radial one was compressive in the interior. From the quarter to the edge of the cylinder specimen, the hoop tensile strain increased, radial and axial strains changed to tensile and compressive, respectively. Therefore, the interior of the cylinder specimen was found to be deformed elastically to balance the existence of compressive residual stresses in the carburized case layer. (author)

  7. A wide extent of inter-strain diversity in virulent and vaccine strains of alphaherpesviruses.

    Directory of Open Access Journals (Sweden)

    Moriah L Szpara

    2011-10-01

    Full Text Available Alphaherpesviruses are widespread in the human population, and include herpes simplex virus 1 (HSV-1 and 2, and varicella zoster virus (VZV. These viral pathogens cause epithelial lesions, and then infect the nervous system to cause lifelong latency, reactivation, and spread. A related veterinary herpesvirus, pseudorabies (PRV, causes similar disease in livestock that result in significant economic losses. Vaccines developed for VZV and PRV serve as useful models for the development of an HSV-1 vaccine. We present full genome sequence comparisons of the PRV vaccine strain Bartha, and two virulent PRV isolates, Kaplan and Becker. These genome sequences were determined by high-throughput sequencing and assembly, and present new insights into the attenuation of a mammalian alphaherpesvirus vaccine strain. We find many previously unknown coding differences between PRV Bartha and the virulent strains, including changes to the fusion proteins gH and gB, and over forty other viral proteins. Inter-strain variation in PRV protein sequences is much closer to levels previously observed for HSV-1 than for the highly stable VZV proteome. Almost 20% of the PRV genome contains tandem short sequence repeats (SSRs, a class of nucleic acids motifs whose length-variation has been associated with changes in DNA binding site efficiency, transcriptional regulation, and protein interactions. We find SSRs throughout the herpesvirus family, and provide the first global characterization of SSRs in viruses, both within and between strains. We find SSR length variation between different isolates of PRV and HSV-1, which may provide a new mechanism for phenotypic variation between strains. Finally, we detected a small number of polymorphic bases within each plaque-purified PRV strain, and we characterize the effect of passage and plaque-purification on these polymorphisms. These data add to growing evidence that even plaque-purified stocks of stable DNA viruses exhibit

  8. Chromosomal duplication strains of Aspergillus nidulans and their instability

    International Nuclear Information System (INIS)

    Azevedo, J.L. de; Almeida Okino, L.M. de

    1981-01-01

    Strains of Aspergillus nidulans with chromosomal duplication were obtained after gamma irradiation followed by crossing of the translocated strains with normal strains. From 20 analysed colonies, 12 have shown translocations induced by irradiation. Segregants from four of these translocation strains crossed to normal strains have shown to be unstable although presenting normal morphology. Two segregants were genetically analysed. The first one has shown a duplication of part of linkage groups VIII and the second one presented a duplication of a segment of linkage group V. These new duplication strains in A. nidulans open new perspectives of a more detailed study of the instability phenomenon in this fungus. (Author) [pt

  9. Hole doped Dirac states in silicene by biaxial tensile strain

    KAUST Repository

    Kaloni, Thaneshwor P.

    2013-03-11

    The effects of biaxial tensile strain on the structure, electronic states, and mechanical properties of silicene are studied by ab-initio calculations. Our results show that up to 5% strain the Dirac cone remains essentially at the Fermi level, while higher strain induces hole doped Dirac states because of weakened Si–Si bonds. We demonstrate that the silicene lattice is stable up to 17% strain. It is noted that the buckling first decreases with the strain (up to 10%) and then increases again, which is accompanied by a band gap variation. We also calculate the Grüneisen parameter and demonstrate a strain dependence similar to that of graphene.

  10. Development of piping strain sensor for stress evaluation

    International Nuclear Information System (INIS)

    Takahama, Tsunemichi; Nishimura, Kazuma; Ninomiya, Seiichiro; Matsumoto, Yoshihiro; Harada, Yutaka

    2014-01-01

    In a small diameter piping, stresses are generated due to internal fluid or pump vibrations especially around the welding parts. Authors have successfully developed a pipe strain sensor which is able to measure such stresses. Unlike conventional methods using strain gages and adhesive bond, the sensor can measure the strain without putting adhesive bond on the piping surface. However, the strain sensor can provide measurements with a level of accuracy equivalent to that of conventional method using strain gages and adhesive bond. Accordingly, the strain sensor can significantly reduce the working time without any loss of the measurement accuracy. (author)

  11. Variation in the strain anisotropy of Zircaloy with temperature and strain

    International Nuclear Information System (INIS)

    Hindle, E.D.; Worswick, D.

    1984-01-01

    The strong crystallographic texture which is developed during the fabrication of zirconium-based alloys causes pronounced anisotropy in their mechanical properties, particularly deformation. The tendency for circular-section tension specimens with a high concentration of basal poles in one direction to become elliptical when deformed in tension has been used in this study to provide quantitative data on the effects of both strain and temperature on strain anisotropy. Tension tests were carried out over a temperature range of 293 to 1193 K on specimens machined from Zircaloy-2 plate. The strain anisotropy was found to increase markedly at temperatures over 923 K, reaching a maximum in the region of 1070 K. The strain anisotropy increased with increasing strain in this temperature region. The study was extended to Zircaloy-4 pressurized-water reactor fuel cladding by carrying out tube swelling tests and evaluating the axial deformation produced. Although scatter in the test results was higher than that exhibited in the tension tests, the general trend in the data was similar. The effects of the strain anisotropy observed are discussed in relation to the effects of temperature on the ductility of Zircaloy fuel cladding tubes during postulated largebreak loss-of-coolant accidents

  12. Antimicrobial susceptibility of Bifidobacterium breve strains and genetic analysis of streptomycin resistance of probiotic B. breve strain Yakult.

    Science.gov (United States)

    Kiwaki, Mayumi; Sato, Takashi

    2009-09-15

    The minimum inhibitory concentrations (MICs) of 17 antimicrobials for 26 Bifidobacterium breve strains of various origins were determined by broth microdilution. MIC distributions for 17 antimicrobials except streptomycin and tetracycline were unimodal for all strains tested, whereas bimodal distributions were observed for streptomycin and tetracycline. The probiotic strain B. breve strain Yakult showed intrinsic susceptibility to all antimicrobials except streptomycin to which the strain showed an atypically higher MIC of >256 microg/ml. Because this strain is a commercial strain, which is often ingested by many consumers on a daily basis, it is very important to determine the genetic basis for streptomycin resistance of this strain. Molecular analysis revealed that a mutation of the rpsL gene for ribosomal protein S12 was responsible for this streptomycin resistance. The resistance of B. breve strain Yakult to streptomycin, therefore, is caused by a chromosomal mutation and very unlikely to be transferred to other microorganisms.

  13. Strain mapping near a triple junction in strained Ni-based alloy using EBSD and biaxial nanogauges

    Energy Technology Data Exchange (ETDEWEB)

    Clair, A. [Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 5209 CNRS, Universite de Bourgogne, 9 Avenue Alain Savary, BP 47870, 21078 Dijon Cedex (France); Foucault, M.; Calonne, O. [Areva ANP, Centre Technique Departement Corrosion-Chimie, 30 Bd de l' industrie, BP 181, 71205 Le Creusot (France); Lacroute, Y.; Markey, L.; Salazar, M.; Vignal, V. [Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 5209 CNRS, Universite de Bourgogne, 9 Avenue Alain Savary, BP 47870, 21078 Dijon Cedex (France); Finot, E., E-mail: Eric.Finot@u-bourgogne.fr [Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 5209 CNRS, Universite de Bourgogne, 9 Avenue Alain Savary, BP 47870, 21078 Dijon Cedex (France)

    2011-05-15

    Research highlights: > Surface strains measured using nanogauge were compared to the texture obtained by EBSD. > Statistics of the principal strain discern the grains according to the Schmid factor. > Strain hotspots were localized near a triple junction of alloy 600 under tensile loading. > Asymetrical profile of the GB strains is a criterion for surface cracking initiation. - Abstract: A key element for analyzing the crack initiation in strained polycrystalline alloys is the local quantification of the surface strain distribution according to the grain texture. Using electron backscattered diffraction, the local microstructure was determined to both localize a triple junction and deduce the local Schmid factors. Kernel average misorientation (KAM) was also used to map the areas of defect concentration. The maximum principal strain and the in-plane shear strain were quantified using the biaxial nanogauge. Distortions of the array of nanodots used as spot markers were analyzed near the triple junction. The crystallographic orientation and the surface strain were then investigated both statistically for each grain and locally at the grain boundaries. The superimposition of microstructure and strain maps allows the high strain gradient (reaching 3-fold the applied strain) to be localized at preferential grain boundaries near the triple junction. The Schmid factors and the KAM were compared to the maximum principal strain and the in-plane shear strain respectively. The polycrystalline deformation was attributable first to the rotation of some grains, followed by the elongation of all grains along their preferential activated slip systems.

  14. Dynamic strain aging in Haynes 282 superalloy

    Directory of Open Access Journals (Sweden)

    Hörnqvist Magnus

    2014-01-01

    Full Text Available Haynes 282 is a newly introduced Ni-based superallony, developed to provide a combination of high-temperature mechanical properties, thermal stability and processability. The present contribution investigates the effect of dynamic strain aging (DSA on the deformation behaviour of Haynes 282 during monotonic and cyclic loading. It is shown that DSA (presumably related to carbon diffusion based on rough estimates of the activation energy completely dominates the development of the stress during cycling at intermediate temperatures, leading to extensive cyclic hardening and serrated yielding. However, no clear effects on the fatigue life or the resulting dislocation structure could be observed. The tensile properties were not severely affected, in spite of the presence of extensive serrated yielding, although a reduction in ductility was observed in the DSA temperature regime. During monotonic loading at lower strain rates indications of an additional DSA mechanism due to substitutional elements were observed.

  15. Statistics of twinning in strained ferroelastics

    Science.gov (United States)

    Ding, Xiangdong; Aktas, Oktay; Wang, Xiaofei; Li, Suzhi; Zhao, Ziyuan; Zhang, Libo; He, Xiaomei; Lookman, Turab; Saxena, Avadh; Sun, Jun

    2017-10-01

    In this review, we show that the evolution of the microstructure and kinetics of ferroelastic crystals under external shear can be explored by computer simulations of 2D model materials. We find that the nucleation and propagation of twin boundaries in ferroelastics depend sensitively on temperature. In the plastic regime, the evolution of the ferroelastic microstructure under strain deformation maintains a stick-and-slip mechanism in all temperature regimes, whereas the dynamic behavior changes dramatically from power-law statistics at low temperature to a Kohlrausch law at intermediate temperature, and then to a Vogel-Fulcher law at high temperature. In the yield regime, the distribution of jerk energies follows power-law statistics in all temperature regimes for a large range of strain rates. The non-spanning avalanches in the yield regime follow a parabolic temporal profile. The changes of twin pattern and twin boundaries density represent an important step towards domain boundary engineering.

  16. Organic chemistry. Strain-release amination.

    Science.gov (United States)

    Gianatassio, Ryan; Lopchuk, Justin M; Wang, Jie; Pan, Chung-Mao; Malins, Lara R; Prieto, Liher; Brandt, Thomas A; Collins, Michael R; Gallego, Gary M; Sach, Neal W; Spangler, Jillian E; Zhu, Huichin; Zhu, Jinjiang; Baran, Phil S

    2016-01-15

    To optimize drug candidates, modern medicinal chemists are increasingly turning to an unconventional structural motif: small, strained ring systems. However, the difficulty of introducing substituents such as bicyclo[1.1.1]pentanes, azetidines, or cyclobutanes often outweighs the challenge of synthesizing the parent scaffold itself. Thus, there is an urgent need for general methods to rapidly and directly append such groups onto core scaffolds. Here we report a general strategy to harness the embedded potential energy of effectively spring-loaded C-C and C-N bonds with the most oft-encountered nucleophiles in pharmaceutical chemistry, amines. Strain-release amination can diversify a range of substrates with a multitude of desirable bioisosteres at both the early and late stages of a synthesis. The technique has also been applied to peptide labeling and bioconjugation. Copyright © 2016, American Association for the Advancement of Science.

  17. Transfer induced compressive strain in graphene

    DEFF Research Database (Denmark)

    Larsen, Martin Benjamin Barbour Spanget; Mackenzie, David; Caridad, Jose

    2014-01-01

    We have used spatially resolved micro Raman spectroscopy to map the full width at half maximum (FWHM) of the graphene G-band and the 2D and G peak positions, for as-grown graphene on copper catalyst layers, for transferred CVD graphene and for micromechanically exfoliated graphene, in order...... to characterize the effects of a transfer process on graphene properties. Here we use the FWHM(G) as an indicator of the doping level of graphene, and the ratio of the shifts in the 2D and G bands as an indicator of strain. We find that the transfer process introduces an isotropic, spatially uniform, compressive...... strain in graphene, and increases the carrier concentration....

  18. Relation between job strain and myocardial infarction

    DEFF Research Database (Denmark)

    Netterstrøm, B; Nielsen, F E; Kristensen, T S

    1999-01-01

    OBJECTIVES: To study the influence of different job related and socioeconomic factors for development of myocardial infarction (MI). METHOD: The study was a case-control study of 76 male wage earners who had been admitted to hospital with MI. As a control group 176 male wage earners not admitted...... to hospital who were residents of the same county were used. Both groups were interviewed with an extensive questionnaire on job related conditions. Several indices on job related psychosocial factors were established in accordance with Karasek's job strain model as well as the extension of the model......, the isostrain model. RESULTS: The most significant findings were consistent with Karasek's job strain model in that mean with a high degree of demand combined with a low degree of control at work had a significantly increased odds ratio (OR) 95% confidence interval (95% CI) of 2.1 (1.2 to 3.8) for MI after...

  19. Strain-tunable quantum dot devices

    International Nuclear Information System (INIS)

    Rastelli, A.; Trotta, R.; Zallo, E.; Atkinson, P.; Magerl, E.; Ding, F.; Plumhof, J.D.; Kumar, S.; Doerr, K.; Schmidt, O.G.

    2011-01-01

    We introduce a new class of quantum dot-based devices, in which the semiconductor structures are integrated on top of piezoelectric actuators. This combination allows on one hand to study in detail the effects produced by variable strains (up to about 0.2%) on the excitonic emission of single quantum dots and on the other to manipulate their electronic- and optical properties to achieve specific requirements. In fact, by combining strain with electric fields we are able to obtain (i) independent control of emission energy and charge-state of a QD, (II) wavelength-tunable single-QD light-emitting diodes and (III) frequency-stabilized sources of single photons at predefined wavelengths. Possible future extensions and applications of this technology will be discussed.

  20. Systems strategies for developing industrial microbial strains

    DEFF Research Database (Denmark)

    Lee, Sang Yup; Kim, Hyun Uk

    2015-01-01

    Industrial strain development requires system-wide engineering and optimization of cellular metabolism while considering industrially relevant fermentation and recovery processes. It can be conceptualized as several strategies, which may be implemented in an iterative fashion and in different...... performance under industrial fermentation conditions. These challenges can be overcome by taking systems approaches through the use of state-of-the-art tools of systems biology, synthetic biology and evolutionary engineering in the context of industrial bioprocess. Major systems metabolic engineering...

  1. Neutron diffraction residual strain / stress measurements

    International Nuclear Information System (INIS)

    Paradowska, Anna

    2012-01-01

    Residual stresses affect mechancial properties of materials and prodcuts, it is essential to estimate them practically in order to esatblish acceptable limits. Knowledge of the development of residual stresses in components at the various production stages- extrusion, rolling, machining, welding and heat treating-can be used to imporve product reliability and performance. This short article gives an example relevant to the power industry using ANSTO's 'Kowari' neutron strain scanner.

  2. Note on Strain Release Variation with Depth

    Directory of Open Access Journals (Sweden)

    A. G. GALANOPOULOS

    1964-06-01

    Full Text Available In the present paper an attempt is made to approach
    the problem of the upper mantle structure by studying the strain relea.se
    variation with depth. If the method and data used in this paper are adequate,
    we may be allowed to say that although there is no strain release
    evidence for the depth of the upper boundary of the asthenospliere zone on
    account of lack of adequate accuracy in the determination of focal depths,
    nevertheless there is ample indication of a discontinuity at about 125 km
    depth. The abrupt change in the rate of decrease in the strain release
    with depth near this level clearly indicates that a sudden decrease in the
    yield strength of the material in the earth should occur at about this depth.
    I t might even be possible to think that the melting point of some kind of
    crystal grains or rocks in the earth is attained at that depth. However,
    this does not involve a completely molten state. This state should rather
    occur at depths where there is a complete lack of strain release. Regionally
    this state is attained at different depths, but in some regions the partially
    molten state, i. e. the heterogeneity of the mantle, probably recurs or increases
    due to the pressure increase or some other reason and reaches a minor
    maximum beyond which it might be possible to speculate that the heterogeneity
    of the mantle falls off rapidly and a continuous layer of material
    in molten state covers the whole earth. If data from other sources will
    confirm this structure, there will be good reasons to think of redefining
    the upper boundaries of surface and intermediate shocks at depths of 125
    and 425 km or thereabouts, respectively.

  3. PNNL Stress/Strain Correlation for Zircaloy

    Energy Technology Data Exchange (ETDEWEB)

    Geelhood, Kenneth J.; Beyer, Carl E.; Luscher, Walter G.

    2008-07-18

    Pacific Northwest National Laboratory (PNNL) was tasked with incorporating cladding mechanical property data into the Nuclear Regulatory Commission (NRC) fuel codes, FRAPCON-31 and FRAPTRAN2, by the NRC Office of Nuclear Reactor Research. The objective of that task was to create a mechanical model that can calculate true stress, true strain, and the possible failure of the fuel rod cladding based on uniaxial test data.

  4. Embedded silicon nanocrystal interface structure and strain

    Science.gov (United States)

    Shenoy, Bhamy Maithry; Hegde, G. M.; Mahapatra, D. Roy

    2018-01-01

    The structure of nanocrystal-matrix interface and strain in embedded nanocrystals are studied using large-scale atomistic simulations, with the examples of Si nanocrystal embedded in amorphous matrix of SiO2. Photoluminescence from silicon nanocrystals embedded in a dielectric matrix like SiO2 and Si3N4 are promising for Si-based optical devices. The nanocrystal-matrix interface plays a crucial role in understanding its optical and electrical properties. Nanocrystals with diameters varying from 2.17 to 4.56 nm are studied. A detailed quantitative analysis of the variation of Si/SiO2 interface structure and strain distribution with nanocrystal diameter is reported. A linear variation of the interface width with nanocrystal diameter is observed with thinner interfaces for larger nanocrystals. Local deformation analysis reveals that the smaller nanocrystals are highly strained, whereas the strain in the larger ones shifts to the interface. This is in accordance with observed increase in total percentage of defect states in the interface from 39 to 70 % for diameter increasing from 2.17 to 4.56 nm. Moreover, based on the atomic arrangements at the interface, optically active defects like Pb centres, E centres and non-bridging oxygen centres are identified and a dominance of Pb centres is observed for all the nanocrystals. The detailed structural characterization-related investigations using the proposed simulation approach will find useful application in designing system-level response of embedded nanocrystals and also to correlate various experimental observations.

  5. Piezoelectric effect in strained quantum wells

    International Nuclear Information System (INIS)

    Dang, L.S.; Andre, R.; Cibert, J.

    1995-01-01

    This paper describes some physical aspects of the piezoelectric effect which takes place in strained semiconductor heterostructures grown along a polar axis. First we show how piezoelectric fields can be accurately measured by optical spectroscopy. Then we discuss about the origin of the non-linear piezoelectric effect reported recently for CdTe, and maybe for InAs as well. Finally we compare excitonic effects in piezoelectric and non-piezoelectric quantum wells. (orig.)

  6. Effective stress coefficient for uniaxial strain condition

    DEFF Research Database (Denmark)

    Alam, M.M.; Fabricius, I.L.

    2012-01-01

    The effective stress coefficient, introduced by Biot, is used for predicting effective stress or pore pressure in the subsurface. It is not a constant value. It is different for different types of sediment and it is stress dependent. We used a model, based on contact between the grains to describ...... determined under uniaxial strain condition will be more relevant in reservoir studies. Copyright 2012 ARMA, American Rock Mechanics Association....

  7. Magnetoelastic strain sensors for the outdoors application

    Czech Academy of Sciences Publication Activity Database

    Bydžovský, J.; Kraus, Luděk; Švec, P.; Pasquale, M.

    272-276, Suppl.1 (2004), E1743-E1745 ISSN 0304-8853. [International Conference on Magnetism (ICM 2003). Rome, 27.07.2003-01.08.2003] Grant - others:NATO(XX) SfP -973649 Institutional research plan: CEZ:AV0Z1010914 Keywords : strain sensor * amorphous alloy * magnetoelastic properties * magnetic anisotropy * civil engineering Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 1.031, year: 2004

  8. Enterobacter Strains Might Promote Colon Cancer.

    Science.gov (United States)

    Yurdakul, Dilşad; Yazgan-Karataş, Ayten; Şahin, Fikrettin

    2015-09-01

    Many studies have been performed to determine the interaction between bacterial species and cancer. However, there has been no attempts to demonstrate a possible relationship between Enterobacter spp. and colon cancer so far. Therefore, in the present study, it is aimed to investigate the effects of Enterobacter strains on colon cancer. Bacterial proteins were isolated from 11 Enterobacter spp., one Morganella morganii, and one Escherichia coli strains, and applied onto NCM460 (Incell) and CRL1790 (ATCC) cell lines. Cell viability and proliferation were determined in MTS assay. Flow Cytometry was used to detect CD24 level and apoptosis. Real-Time PCR studies were performed to determine NFKB and Bcl2 expression. Graphpad Software was used for statistical analysis. The results showed that proteins, isolated from the Enterobacter spp., have significantly increased cell viability and proliferation, while decreasing the apoptosis of the cell lines tested. The data in the present study indicated that Enterobacter strains might promote colon cancer. Moreover, Enterobacter spp. could be a clinically important factor for colon cancer initiation and progression. Studies can be extended on animal models in order to develop new strategies for treatment.

  9. Strain sensors for high field pulse magnets

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, Christian [Los Alamos National Laboratory; Zheng, Yan [Los Alamos National Laboratory; Easton, Daniel [Los Alamos National Laboratory; Farinholt, Kevin M [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory

    2009-01-01

    In this paper we present an investigation into several strain sensing technologies that are being considered to monitor mechanical deformation within the steel reinforcement shells used in high field pulsed magnets. Such systems generally operate at cryogenic temperatures to mitigate heating issues that are inherent in the coils of nondestructive, high field pulsed magnets. The objective of this preliminary study is to characterize the performance of various strain sensing technologies at liquid nitrogen temperatures (-196 C). Four sensor types are considered in this investigation: fiber Bragg gratings (FBG), resistive foil strain gauges (RFSG), piezoelectric polymers (PVDF), and piezoceramics (PZT). Three operational conditions are considered for each sensor: bond integrity, sensitivity as a function of temperature, and thermal cycling effects. Several experiments were conducted as part of this study, investigating adhesion with various substrate materials (stainless steel, aluminum, and carbon fiber), sensitivity to static (FBG and RFSG) and dynamic (RFSG, PVDF and PZT) load conditions, and sensor diagnostics using PZT sensors. This work has been conducted in collaboration with the National High Magnetic Field Laboratory (NHMFL), and the results of this study will be used to identify the set of sensing technologies that would be best suited for integration within high field pulsed magnets at the NHMFL facility.

  10. Shewanella strain isolated from black powder

    Energy Technology Data Exchange (ETDEWEB)

    Lutterbach, Marcia T.S.; Contador, Luciana S.; Oliveira, Ana Lucia C.; Galvao, Mariana M. [National Institute of Technology (INT), Rio de Janeiro, RJ (Brazil); Pimenta, Gutemberg S. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2009-07-01

    Black powder is a term frequently used to refer to residues formed by various types of iron sulfides mixed with contaminants eventually present in the natural gas flow. According to some researchers, the occurrence of black powder in gas pipelines, besides its chemical corrosion origin, can be directly related to the sulfate-reducing bacteria (SRB) metabolism in this environment. A black powder sample was inoculated in a Post gate E medium modified with the addition of thioglycolate. The resulting positive culture was kept in the laboratory for four years until its use. A dilution technique was then performed aiming to isolate an SRB strain. The bacterial strain isolated and identified through DNA sequencing was not an SRB but rather a Shewanella sp. Compared to the sulfate-reducing bacteria group-traditionally considered the foremost responsible for microbially-influenced corrosion (MIC) - Shewanella is a facultative anaerobe and has a versatile metabolism. Shewanella is able to reduce ferric iron and sulfite, oxidize hydrogen gas, and produce hydrogen sulfide; therefore, these bacteria can be responsible for MIC and pit formation. The isolated Shewanella was used in a corrosion experiment, and the corrosion products were characterized by X-ray diffraction, identifying iron sulfides, iron oxides, and sulfur. Our results indicate that the strain isolated, S. putrefaciens, plays a key role in corrosion problems in gas pipelines. (author)

  11. Integrated strain array for cellular mechanobiology studies

    International Nuclear Information System (INIS)

    Simmons, C S; Sim, J Y; Baechtold, P; Chung, C; Borghi, N; Pruitt, B L; Gonzalez, A

    2011-01-01

    We have developed an integrated strain array for cell culture enabling high-throughput mechano-transduction studies. Biocompatible cell culture chambers were integrated with an acrylic pneumatic compartment and microprocessor-based control system. Each element of the array consists of a deformable membrane supported by a cylindrical pillar within a well. For user-prescribed waveforms, the annular region of the deformable membrane is pulled into the well around the pillar under vacuum, causing the pillar-supported region with cultured cells to be stretched biaxially. The optically clear device and pillar-based mechanism of operation enables imaging on standard laboratory microscopes. Straightforward fabrication utilizes off-the-shelf components, soft lithography techniques in polydimethylsiloxane and laser ablation of acrylic sheets. Proof of compatibility with basic biological assays and standard imaging equipment were accomplished by straining C2C12 skeletal myoblasts on the device for 6 h. At higher strains, cells and actin stress fibers realign with a circumferential preference

  12. Strain measurements during pressurized thermal shock experiment

    International Nuclear Information System (INIS)

    Tarso Vida Gomes, P. de; Julio Ricardo Barreto Cruz; Tanius Rodrigues Mansur; Denis Henrique Bianchi Scaldaferri; Miguel Mattar Neto

    2005-01-01

    For the life extension of nuclear power plants, the residual life of most of their components must be evaluated along all their operating time. Concerning the reactor pressure vessel, the pressurized thermal shock (PTS) is a very important event to be considered. For better understanding the effects of this kind of event, tests are made. The approach described here consisted of building a simplified in-scale physical model of the reactor pressure vessel, submitting it to the actual operating temperature and pressure conditions and provoking a thermal shock by means of cold water flow in its external surface. To conduct such test, the Nuclear Technology Development Center (CDTN) has been conducting several studies related to PTS and has also built a laboratory that has made possible the simulation of the PTS loading conditions. Several cracks were produced in the external surface of the reactor pressure vessel model. Strain gages were fixed by means of electrical discharge welding over the cracks regions in both external and internal surfaces. The temperature was monitored in 10 points across the vessel wall. The internal pressure was manually controlled and monitored using a pressure transducer. Two PTS experiments were conducted and this paper presents the strain measurement procedures applied to the reactor pressure vessel model, during the PTS, using strain gages experimental methodology. (authors)

  13. Strain path and work-hardening behavior of brass

    Energy Technology Data Exchange (ETDEWEB)

    Sakharova, N.A.; Fernandes, J.V. [CEMUC, Department of Mechanical Engineering, University of Coimbra, Rua Luis Reis Santos, Pinhal de Marrocos, 3030-788 Coimbra (Portugal); Vieira, M.F. [CEMUC, Department of Metallurgical and Materials Engineering, Faculty of Engineering of University of Porto, Rua Dr. Roberto Frias, 4200-465 Porto (Portugal)], E-mail: mvieira@fe.up.pt

    2009-05-15

    Plastic straining in metal forming usually includes changes of strain path, which are frequently not taken into account in the analysis of forming processes. Moreover, strain path change can significantly affect the mechanical behavior and microstructural evolution of the material. For this reason, a combination of several simple loading test sequences is an effective way to investigate the dislocation microstructure of sheet metals under such forming conditions. Pure tension and rolling strain paths and rolling-tension strain path sequences were performed on brass sheets. A study of mechanical behavior and microstructural evolution during the simple and the complex strain paths was carried out, within a wide range of strain values. The appearance and development of deformation twinning was evident. It was shown that strain path change promotes the onset of premature twinning. The work-hardening behavior is discussed in terms of the twinning and dislocation microstructure evolution, as revealed by transmission electron microscopy.

  14. Introducing lattice strain to graphene encapsulated in hBN

    Science.gov (United States)

    Tomori, Hikari; Hiraide, Rineka; Ootuka, Youiti; Watanabe, Kenji; Taniguchi, Takashi; Kanda, Akinobu

    Due to the characteristic lattice structure, lattice strain in graphene produces an effective gauge field. Theories tell that by controlling spatial variation of lattice strain, one can tailor the electronic state and transport properties of graphene. For example, under uniaxial local strain, graphene exhibits a transport gap at low energies, which is attractive for a graphene application to field effect devices. Here, we develop a method for encapsulating a strained graphene film in hexagonal boron-nitride (hBN). It is known that the graphene carrier mobility is significantly improved by the encapsulation of graphene in hBN, which has never been applied to strained graphene. We encapsulate graphene in hBN using the van der Waals assembly method. Strain is induced by sandwiching a graphene film between patterned hBN sheets. Spatial variation of strain is confirmed with micro Raman spectroscopy. Transport measurement of encapsulated strained graphene is in progress.

  15. Serological and genetic examination of some nontypical Streptococcus mutans strains.

    Science.gov (United States)

    Coykendall, A L; Bratthall, D; O'Connor, K; Dvarskas, R A

    1976-01-01

    Thirty-four strains of Streptococcus mutans whose antigenic or genetic positions were unclear or unknown with respect to the serological scheme of Bratthall (1970) and Perch et al. (1974), or the genetic (deoxyribonucleic acid base sequence homology) scheme of Coykendall were analyzed to clarify their relationship to previously well-characterized strains. Strain OMZ175 of the "new" serotype f was genetically homologous with strains of S. mutans subsp. mutans. Strains of the "new" serotype g were homologous with serotype d strains (S. mutans subsp. sobrinus). Strains isolated from wild rats constituted a new genetic group but carried the c antigen. Thus, strains within a "genospecies" (subspecies) of S. mutans may not always carry a unique or characteristic antigen. We suggest that the existence of multiple serotypes within subspecies represents antigenic variation and adaptations to hosts. PMID:965091

  16. Commonly administered BCG strains including an evolutionarily early strain and evolutionarily late strains of disparate genealogy induce comparable protective immunity against tuberculosis.

    Science.gov (United States)

    Horwitz, Marcus A; Harth, Günter; Dillon, Barbara Jane; Maslesa-Galić, Sasa

    2009-01-14

    BCG has been administered to over 4 billion persons worldwide, but its efficacy in preventing tuberculosis in adults has been highly variable. One hypothesis for its variability is that different strains of BCG vary in protective efficacy, and moreover, that evolutionarily early strains are more efficacious than the more attenuated evolutionarily late strains, which lack region of deletion 2. To examine this hypothesis, we tested six widely used BCG strains--the evolutionarily early strain BCG Japanese, two evolutionarily late strains in DU2 Group III (BCG Danish and Glaxo), and three evolutionarily late strains in DU2 Group IV (BCG Connaught, Pasteur, and Tice)--in the guinea pig model of pulmonary tuberculosis. With the exception of BCG Glaxo, which had relatively poor efficacy, we found no substantial differences in efficacy between the early strain and the late strains, and only small differences in efficacy among late strains. BCG Tice was the most efficacious BCG vaccine, with significantly fewer Mycobacterium tuberculosis in the lung and spleen than BCG Danish and BCG Japanese, although absolute differences in the organ burden of M. tuberculosis among these three vaccines were small (Pasteur were not significantly different. rBCG30, a recombinant BCG Tice vaccine overexpressing the M. tuberculosis 30 kDa major secretory protein (Antigen 85B), was more potent than any BCG vaccine (P < 0.0001 for differences in organ burden). Our study shows that late strains are not less potent than an early strain and argues against strain differences as a major factor in the variability of outcomes in BCG vaccine trials.

  17. Strain predominance following exposure of vaccinated and naive pregnant gilts to multiple strains of porcine reproductive and respiratory syndrome virus.

    Science.gov (United States)

    Lager, Kelly M; Mengeling, William L; Wesley, Ronald D

    2003-05-01

    Two studies were performed in order to test the relative ability of different strains of porcine reproductive and respiratory syndrome virus (PRRSV) to replicate and cross the placental barrier in pregnant gilts. Study 1 comprised 6 nonvaccinated gilts. Study 2 comprised 8 nonvaccinated gilts and 12 gilts that were vaccinated twice before conception. On, or about, gestation day 90 all gilts were simultaneously exposed to 20 field strains of PRRSV (all strains were distinguishable by restriction fragment length polymorphism (RFLP) patterns). Gilts of study 1 were euthanized on day 7 postpartum. Gilts of study 2 were euthanized on, or about, gestation day 111. All gilts, pigs, and fetuses were tested for the presence and type of strain of PRRSV. Of 128 samples shown to contain PRRSV, 118 contained a single strain, 4 contained 2 strains, and 2 contained a strain or strains for which the RFLP pattern was undecipherable. Only 8 of the 20 strains were isolated from nonvaccinated gilts and their litters. And only 2 of the 20 strains (notably 2 of the same strains isolated from nonvaccinated gilts and their litters), were isolated from vaccinated gilts and their litters. Moreover, 1 of the 2 strains accounted for most (31 of 37; 84%) of the isolates from the vaccinated group. Collectively these results indicate that strains differ in their ability to replicate in pregnant gilts and cross the placental barrier. And they suggest that maternal immunity, although sometimes insufficient to prevent transplacental infection, can exert additional selective pressure.

  18. Strain-induced changes to the electronic structure of germanium

    KAUST Repository

    Tahini, H. A.

    2012-04-17

    Density functional theory calculations (DFT) are used to investigate the strain-induced changes to the electronic structure of biaxially strained (parallel to the (001), (110) and (111) planes) and uniaxially strained (along the [001], [110] and [111] directions) germanium (Ge). It is calculated that a moderate uniaxial strain parallel to the [111] direction can efficiently transform Ge to a direct bandgap material with a bandgap energy useful for technological applications. © 2012 IOP Publishing Ltd.

  19. Strain-induced changes to the electronic structure of germanium.

    Science.gov (United States)

    Tahini, H; Chroneos, A; Grimes, R W; Schwingenschlögl, U; Dimoulas, A

    2012-05-16

    Density functional theory calculations (DFT) are used to investigate the strain-induced changes to the electronic structure of biaxially strained (parallel to the (001), (110) and (111) planes) and uniaxially strained (along the [001], [110] and [111] directions) germanium (Ge). It is calculated that a moderate uniaxial strain parallel to the [111] direction can efficiently transform Ge to a direct bandgap material with a bandgap energy useful for technological applications.

  20. Identification of pH tolerant Bradyrhizobium japonicum strains and ...

    African Journals Online (AJOL)

    Eight strains of Bradyrhizobium japonicum were isolated from the root nodules of soybean cultivar PK 472 collected from Adaptive Trial Centre, Bundi, India. All the isolates were authenticated through plant assay test in germination pouches. Growth of the isolated strains on different pH levels was observed and three strains ...

  1. Enrichment and isolation of microbial strains degrading bioplastic ...

    African Journals Online (AJOL)

    Polyvinyl alcohol (PVA) degrading bacterial strains were isolated from various environmental sites rich in plastic wastes by using the enrichment culture technique. Among the various isolated strains, the selected potent PVA degrading bacterial strains were tentatively characterized as Bacillus and Pseudomonas sp.

  2. Potential of Laceyella sacchari strain B42 crude xylanase in ...

    African Journals Online (AJOL)

    Xylanase producing thermophilic actinomycetes strain B42 was isolated from bagasse. This strain was enriched on oat spelt xylan agar medium and screened onto xylan-congo red agar plate by the xylanolysis method. The phylogenetic analysis using 16S rDNA sequence data confirmed that strain B42 showed highest ...

  3. Draft genome sequence of Agrobacterium rhizogenes strain NCPPB2659

    Science.gov (United States)

    This work reports the draft genome of Agrobacterium rhizogenes strain NCPPB2659 (also known as strain K599). The assembled genome contains 5,277,347 bp, and is composed of 1 circular chromosome, the Ri virulence plasmid, and 17 scaffolds pertaining to the linear chromosome. The wild type strain cau...

  4. Second Generation Models for Strain-Based Design

    Science.gov (United States)

    2011-08-30

    This project covers the development of tensile strain design models which form a key part of the strain-based design of pipelines. The strain-based design includes at least two limit states, tensile rupture, and compressive buckling. The tensile stra...

  5. Filamentous phage associated with recent pandemic strains of Vibrio parahaemolyticus.

    OpenAIRE

    Iida, T.; Hattori, A.; Tagomori, K.; Nasu, H.; Naim, R.; Honda, T.

    2001-01-01

    A group of pandemic strains of Vibrio parahaemolyticus has recently appeared in Asia and North America. We demonstrate that a filamentous phage is specifically associated with the pandemic V. parahaemolyticus strains. An open reading frame unique to the phage is a useful genetic marker to identify these strains.

  6. Corrosion induced strain monitoring through fibre optic sensors

    International Nuclear Information System (INIS)

    Grattan, S K T; Basheer, P A M; Taylor, S E; Zhao, W; Sun, T; Grattan, K T V

    2007-01-01

    The use of strain sensors is commonplace within civil engineering. Fibre optic strain sensors offer a number of advantages over the current electrical resistance type gauges. In this paper the use of fibre optic strain sensors and electrical resistance gauges to monitor the production of corrosion by-products has been investigated and reported

  7. Fluorene biodegradation potentials of Bacillus strains isolated from ...

    African Journals Online (AJOL)

    Shared resistance to ceftriazone and cotrimozaxole were exhibited by both strains while only strain BM1 was resistant to both amoxycilin and streptomycin. The rate of degradation of fluorene (50 mg/L) by the two isolates, after 30 days of incubation were 0.09 and 0.08 mg/L/h for strains BM1 and BR1, respectively.

  8. Brands Of Ampiclox Against Clinical Strains Of Staphylococcus aureus

    African Journals Online (AJOL)

    ... relevant factor in the antibiotic resistance of Staphylococcus aureus. Consequently the antibiogram and susceptibility of 20 clinical strains and a control strain (NCTC 6571) of Staphylococcus aureus to 10 different brands of ampiclox were determined by disk diffusion and tube broth dilution methods. The control strain was

  9. Discrimination of citrus tristeza virus (CTV) strains using Mexican ...

    African Journals Online (AJOL)

    Two strains of citrus tristeza virus (CTV) were studied for six years in Yaounde in the forest zone of Cameroon. These strains, SNCL2 and SNCL4, were characterized on Lisbon lemon in Nyombe in the littoral zone of Cameroon. They were inoculated onto combinations of Mexican lime/citrange Troyer. The virulent strain ...

  10. Mesoscopic Features of Plastic Strain in Step Yield

    Science.gov (United States)

    Krishtal, M. M.

    2002-09-01

    A specially developed method for isolating the macroscopically homogeneous part of plastic strain in step yield (SY) of materials is used for analyzing stress-strain curves of alloy AMg5 obtained at various strain rates in the range of appearance of SY. It is shown that the beginning of the SY corresponds to the inflection point in the linear dependence of the true stresses ( S) on the true plastic strain ( e) in S - e 1/2 coordinates, which is identified as the appearance of a new individual strain stage caused by the change in the strain mechanism at the mesolevel. The established change in the strain mechanism is shown to consist in an abrupt growth of the elementary volume of plastic strain due to the appearance of a space-time correlation in the development of the strain microprocesses, which is responsible for macrolocalization and general loss of the stability of the strain. The developed experimental and computational method is used to determine the rate sensitivity of the strain resistance to step yield, which is a positive quantity that increases with the strain.

  11. Biochemical Characterization of Prion Strains in Bank Voles

    Directory of Open Access Journals (Sweden)

    Romolo Nonno

    2013-07-01

    Full Text Available Prions exist as different strains exhibiting distinct disease phenotypes. Currently, the identification of prion strains is still based on biological strain typing in rodents. However, it has been shown that prion strains may be associated with distinct PrPSc biochemical types. Taking advantage of the availability of several prion strains adapted to a novel rodent model, the bank vole, we investigated if any prion strain was actually associated with distinctive PrPSc biochemical characteristics and if it was possible to univocally identify strains through PrPSc biochemical phenotypes. We selected six different vole-adapted strains (three human-derived and three animal-derived and analyzed PrPSc from individual voles by epitope mapping of protease resistant core of PrPSc (PrPres and by conformational stability and solubility assay. Overall, we discriminated five out of six prion strains, while two different scrapie strains showed identical PrPSc types. Our results suggest that the biochemical strain typing approach here proposed was highly discriminative, although by itself it did not allow us to identify all prion strains analyzed.

  12. THE EFFECT OF DIFFERENT PROBIOTIC STRAINS ON FATTENINTHE EFFECT OF DIFFERENT PROBIOTIC STRAINS ON F

    Directory of Open Access Journals (Sweden)

    Cyril Hrnčár

    2013-02-01

    Full Text Available The aim of this work was to verify the effect of different probiotic strains applied through a drinking water source to fattening and carcass parameters of broiler ducks. Fattening experiment was realised in half-operating conditions of experimental basis of Department of Poultry Science and Small Animal Husbandry in three-floor cage technology. Totally 90 broiler duck were divided to three groups. Experimental group 1 (n=30 received probiotic strain Lactobacillus fermentum CCM 7158 with concentration of 1x109 colony forming units (CFU in drinking water daily addition of 0.90 g day 1 to day 56 of fattening. Experimental group 2 (n=30 received probiotic strain Enterococcus faecium M 74 with concentration of 1x109 colony forming units (CFU in drinking water daily addition of 0.45 g day 1 to day 56 of fattening. The control group of birds (n=30 received water without any probiotics. The supplementation of probiotic strains Lactobacillus fermentum and Enterococcus faecium no significant affected (P≥0.05 final body weight, feed consumption and mortality of broiler ducks. From carcass parameters, we recorded statistically significant (P<0.05 reduction in weight of abdominal fat of broiler ducks for application of tested probiotic strains.

  13. Clostridium difficile outbreak caused by NAP1/BI/027 strain and non-027 strains in a Mexican hospital

    Directory of Open Access Journals (Sweden)

    Rayo Morfin-Otero

    2016-01-01

    Conclusions: C. difficile NAP1/BI/027 strain and non-027 strains are established pathogens in our hospital. Accordingly, surveillance of C. difficile infections is now part of our nosocomial prevention program.

  14. Low cycle fatigue behavior of the extruded AZ80 magnesium alloy under different strain amplitudes and strain rates

    Directory of Open Access Journals (Sweden)

    Cong Wang

    2016-09-01

    Full Text Available Low cycle fatigue behavior of extruded AZ80 magnesium alloy was investigated under uniaxial tension-compression at different strain amplitudes and strain rates. The results show that the extruded AZ80 magnesium alloy exhibits cyclic hardening at strain amplitudes ranging from 0.4% to 1.0%, the asymmetry of hysteresis loops becomes increasingly obvious when the strain amplitude increases. Higher strain rates correspond to higher stress amplitudes, high mean stresses and short fatigue life. {10–12} extension twins play a role in the cyclic deformation under higher strain amplitudes (0.8%, 1.0%. The relationship between total strain energy density and fatigue life can be described by the modified Morrow model. The effect of strain rate on the fatigue life can also be predicted by the model.

  15. Radial and longitudinal strain and strain rate assessed by speckle-tracking echocardiography in dogs with myxomatous mitral valve disease

    DEFF Research Database (Denmark)

    Zois, Nora Elisabeth; Tidholm, A.; Nägga, K.M.

    2012-01-01

    Assessment of left ventricular (LV) function using conventional echocardiographic methods is difficult in mitral regurgitation (MR) owing to altered hemodynamic loading conditions. Newer methods such as speckle-tracking echocardiography (STE) provide assessment of LV strain (St) and strain rates...

  16. Revealing differences in metabolic flux distributions between a mutant strain and its parent strain Gluconacetobacter xylinus CGMCC 2955.

    Directory of Open Access Journals (Sweden)

    Cheng Zhong

    Full Text Available A better understanding of metabolic fluxes is important for manipulating microbial metabolism toward desired end products, or away from undesirable by-products. A mutant strain, Gluconacetobacter xylinus AX2-16, was obtained by combined chemical mutation of the parent strain (G. xylinus CGMCC 2955 using DEC (diethyl sulfate and LiCl. The highest bacterial cellulose production for this mutant was obtained at about 11.75 g/L, which was an increase of 62% compared with that by the parent strain. In contrast, gluconic acid (the main byproduct concentration was only 5.71 g/L for mutant strain, which was 55.7% lower than that of parent strain. Metabolic flux analysis indicated that 40.1% of the carbon source was transformed to bacterial cellulose in mutant strain, compared with 24.2% for parent strain. Only 32.7% and 4.0% of the carbon source were converted into gluconic acid and acetic acid in mutant strain, compared with 58.5% and 9.5% of that in parent strain. In addition, a higher flux of tricarboxylic acid (TCA cycle was obtained in mutant strain (57.0% compared with parent strain (17.0%. It was also indicated from the flux analysis that more ATP was produced in mutant strain from pentose phosphate pathway (PPP and TCA cycle. The enzymatic activity of succinate dehydrogenase (SDH, which is one of the key enzymes in TCA cycle, was 1.65-fold higher in mutant strain than that in parent strain at the end of culture. It was further validated by the measurement of ATPase that 3.53-6.41 fold higher enzymatic activity was obtained from mutant strain compared with parent strain.

  17. The MG1363 and IL1403 Laboratory Strains of Lactococcus lactis and Several Dairy Strains Are Diploid▿ †

    OpenAIRE

    Michelsen, Ole; Hansen, Flemming G.; Albrechtsen, Bjarne; Jensen, Peter Ruhdal

    2009-01-01

    Bacteria are normally haploid, maintaining one copy of their genome in one circular chromosome. We have examined the cell cycle of laboratory strains of Lactococcus lactis, and, to our surprise, we found that some of these strains were born with two complete nonreplicating chromosomes. We determined the cellular content of DNA by flow cytometry and by radioactive labeling of the DNA. These strains thus fulfill the criterion of being diploid. Several dairy strains were also found to be diploid...

  18. Selective enrichment media bias the types of Salmonella enterica strains isolated from mixed strain cultures and complex enrichment broths.

    Science.gov (United States)

    Gorski, Lisa

    2012-01-01

    For foodborne outbreak investigations it can be difficult to isolate the relevant strain from food and/or environmental sources. If the sample is contaminated by more than one strain of the pathogen the relevant strain might be missed. In this study mixed cultures of Salmonella enterica were grown in one set of standard enrichment media to see if culture bias patterns emerged. Nineteen strains representing four serogroups and ten serotypes were compared in four-strain mixtures in Salmonella-only and in cattle fecal culture enrichment backgrounds using Salmonella enrichment media. One or more strain(s) emerged as dominant in each mixture. No serotype was most fit, but strains of serogroups C2 and E were more likely to dominate enrichment culture mixtures than strains of serogroups B or C1. Different versions of Rappaport-Vassiliadis (RV) medium gave different patterns of strain dominance in both Salmonella-only and fecal enrichment culture backgrounds. The fittest strains belonged to serogroups C1, C2, and E, and included strains of S. Infantis, S. Thompson S. Newport, S. 6,8:d:-, and S. Give. Strains of serogroup B, which included serotypes often seen in outbreaks such as S. Typhimurium, S. Saintpaul, and S. Schwarzengrund were less likely to emerge as dominant strains in the mixtures when using standard RV as part of the enrichment. Using a more nutrient-rich version of RV as part of the protocol led to a different pattern of strains emerging, however some were still present in very low numbers in the resulting population. These results indicate that outbreak investigations of food and/or other environmental samples should include multiple enrichment protocols to ensure isolation of target strains of Salmonella.

  19. Kinases of two strains of Mycoplasma hyopneumoniae and a strain of Mycoplasma synoviae: an overview

    Directory of Open Access Journals (Sweden)

    Alexandre Melo Bailão

    2007-01-01

    Full Text Available Mycoplasma synoviae and Mycoplasma hyopneumoniae are wall-less eubacteria belonging to the class of Mollicutes. These prokaryotes have a reduced genome size and reduced biosynthetic machinery. They cause great losses in animal production. M. synoviae is responsible for an upper respiratory tract disease of chickens and turkeys. M. hyopneumoniae is the causative agent of enzootic pneumonia in pigs. The complete genomes of these organisms showed 17 ORFs encoding kinases in M. synoviae and 15 in each of the M. hyopneumoniae strain. Four kinase genes were restricted to the avian pathogen while three were specific to the pig pathogen when compared to each other. All deduced kinases found in the non pathogenic strain (J[ATCC25934] were also found in the pathogenic M. hyopneumoniae strain. The enzymes were classified in nine families composing five fold groups.

  20. An atypical Clostridium strain related to the Clostridium botulinum group III strain isolated from a human blood culture.

    Science.gov (United States)

    Bouvet, Philippe; Ruimy, Raymond; Bouchier, Christiane; Faucher, Nathalie; Mazuet, Christelle; Popoff, Michel R

    2014-01-01

    A nontoxigenic strain isolated from a fatal human case of bacterial sepsis was identified as a Clostridium strain from Clostridium botulinum group III, based on the phenotypic characters and 16S rRNA gene sequence, and was found to be related to the mosaic C. botulinum D/C strain according to a multilocus sequence analysis of 5 housekeeping genes.

  1. Complete Genome Sequences of Bovine Parainfluenza Virus Type 3 Strain BN-1 and Vaccine Strain BN-CE.

    Science.gov (United States)

    Ohkura, Takashi; Kokuho, Takehiro; Konishi, Misako; Kameyama, Ken-Ichiro; Takeuchi, Kaoru

    2013-01-01

    Bovine parainfluenza virus type 3 (BPIV3) is associated with upper respiratory disease in cattle in many countries. Here, we report the complete genome sequences of the BPIV3 BN-1 strain, isolated from cattle in Japan, and the BN-CE vaccine strain, derived from the BN-1 strain by passages in chicken embryo fibroblasts.

  2. Sequential acquisition of Potato virus Y strains by Myzus persicae favors the transmission of the emerging recombinant strains

    Science.gov (United States)

    In the past decade recombinant strains of potato virus Y (PVY) have overtaken the ordinary strain, PVYO, as the predominant viruses affecting the US seed potato crop. Aphids may be a contributing factor in the emergence of the recombinant strains, but studies indicate that differences in transmissio...

  3. Repeated Strains, Social Control, Social Learning, and Delinquency: Testing an Integrated Model of General Strain Theory in China

    Science.gov (United States)

    Bao, Wan-Ning; Haas, Ain; Chen, Xiaojin; Pi, Yijun

    2014-01-01

    In Agnew's general strain theory, repeated strains can generate crime and delinquency by reducing social control and fostering social learning of crime. Using a sample of 615 middle-and high-school students in China, this study examines how social control and social learning variables mediate the effect of repeated strains in school and at home on…

  4. A World Health Organization Human Hepatitis E Virus Reference Strain Related to Similar Strains Isolated from Rabbits.

    Science.gov (United States)

    Kaiser, Marco; Delaune, Déborah; Chazouillères, Olivier; Blümel, Johannes; Roque-Afonso, Anne-Marie; Baylis, Sally A

    2018-04-19

    We report here the genome sequence of a hepatitis E virus (HEV) strain from a chronically infected immunodeficient patient. Full-length sequence analysis revealed a distinct HEV strain, of a tentative new subgenotype, clustering with viruses from rabbits. It is a World Health Organization reference strain for validation of nucleic acid testing. Copyright © 2018 Kaiser et al.

  5. Strain and strain rate by two-dimensional speckle tracking echocardiography in a maned wolf

    Directory of Open Access Journals (Sweden)

    Matheus M. Mantovani

    2012-12-01

    Full Text Available The measurement of cardiovascular features of wild animals is important, as is the measurement in pets, for the assessment of myocardial function and the early detection of cardiac abnormalities, which could progress to heart failure. Speckle tracking echocardiography (2D STE is a new tool that has been used in veterinary medicine, which demonstrates several advantages, such as angle independence and the possibility to provide the early diagnosis of myocardial alterations. The aim of this study was to evaluate the left myocardial function in a maned wolf by 2D STE. Thus, the longitudinal, circumferential and radial strain and strain rate were obtained, as well as, the radial and longitudinal velocity and displacement values, from the right parasternal long axis four-chamber view, the left parasternal apical four chamber view and the parasternal short axis at the level of the papillary muscles. The results of the longitudinal variables were -13.52±7.88, -1.60±1.05, 4.34±2.52 and 3.86±3.04 for strain (%, strain rate (1/s, displacement (mm and velocity (cm/s, respectively. In addition, the radial and circumferential Strain and Strain rate were 24.39±14.23, 1.86±0.95 and -13.69±6.53, -1.01±0.48, respectively. Thus, the present study provides the first data regarding the use of this tool in maned wolves, allowing a more complete quantification of myocardial function in this species.

  6. Global Strain in Severe Aortic Valve Stenosis

    DEFF Research Database (Denmark)

    Dahl, Jordi S; Videbæk, Lars; Poulsen, Mikael K

    2012-01-01

    BACKGROUND: -Global longitudinal systolic strain (GLS) is often reduced in aortic stenosis despite normal ejection fraction. The importance of reduced preoperative GLS on long-term outcome after aortic valve replacement (AVR) is unknown. METHODS AND RESULTS: -A total of 125 patients with severe...... quartile 49% (n=15), p=0.04. Patients with increased age, left ventricular hypertrophy and left atrial dilatation were at increased risk. In Cox regression analysis after correcting for standard risk factors and ejection fraction, GLS was found to be significantly associated with cardiac morbidity...

  7. Hydrogen production by recombinant Escherichia coli strains

    Science.gov (United States)

    Maeda, Toshinari; Sanchez‐Torres, Viviana; Wood, Thomas K.

    2012-01-01

    Summary The production of hydrogen via microbial biotechnology is an active field of research. Given its ease of manipulation, the best‐studied bacterium Escherichia coli has become a workhorse for enhanced hydrogen production through metabolic engineering, heterologous gene expression, adaptive evolution, and protein engineering. Herein, the utility of E. coli strains to produce hydrogen, via native hydrogenases or heterologous ones, is reviewed. In addition, potential strategies for increasing hydrogen production are outlined and whole‐cell systems and cell‐free systems are compared. PMID:21895995

  8. Quantum Chemical Strain Analysis For Mechanochemical Processes.

    Science.gov (United States)

    Stauch, Tim; Dreuw, Andreas

    2017-04-18

    The use of mechanical force to initiate a chemical reaction is an efficient alternative to the conventional sources of activation energy, i.e., heat, light, and electricity. Applications of mechanochemistry in academic and industrial laboratories are diverse, ranging from chemical syntheses in ball mills and ultrasound baths to direct activation of covalent bonds using an atomic force microscope. The vectorial nature of force is advantageous because specific covalent bonds can be preconditioned for rupture by selective stretching. However, the influence of mechanical force on single molecules is still not understood at a fundamental level, which limits the applicability of mechanochemistry. As a result, many chemists still resort to rules of thumb when it comes to conducting mechanochemical syntheses. In this Account, we show that comprehension of mechanochemistry at the molecular level can be tremendously advanced by quantum chemistry, in particular by using quantum chemical force analysis tools. One such tool is the JEDI (Judgement of Energy DIstribution) analysis, which provides a convenient approach to analyze the distribution of strain energy in a mechanically deformed molecule. Based on the harmonic approximation, the strain energy contribution is calculated for each bond length, bond angle and dihedral angle, thus providing a comprehensive picture of how force affects molecules. This Account examines the theoretical foundations of quantum chemical force analysis and provides a critical overview of the performance of the JEDI analysis in various mechanochemical applications. We explain in detail how this analysis tool is to be used to identify the "force-bearing scaffold" of a distorted molecule, which allows both the rationalization and the optimization of diverse mechanochemical processes. More precisely, we show that the inclusion of every bond, bending and torsion of a molecule allows a particularly insightful discussion of the distribution of mechanical

  9. Fumonisin and Ochratoxin Production in Industrial Aspergillus niger Strains

    DEFF Research Database (Denmark)

    Frisvad, Jens Christian; Larsen, Thomas Ostenfeld; Thrane, Ulf

    2011-01-01

    %, 33% and 26% respectively. Some of the most frequently used strains in industry NRRL 337, 3112 and 3122 produced both toxins and several strains used for citric acid production were among the best producers of fumonisins in pure agar culture. Most strains used for other biotechnological processes also...... produced fumonisins. Strains optimized through random mutagenesis usually maintained their mycotoxin production capability. Toxigenic strains were also able to produce the toxins on media suggested for citric acid production with most of the toxins found in the biomass, thereby questioning the use...

  10. Dermatophilus congolensis: strain differences in expression of phospholipase activities.

    Science.gov (United States)

    Masters, A M; Ellis, T M; Grein, S B

    1997-09-01

    Interactions between Dermatophilus congolensis strains and with other bacteria of known haemolytic activities were used to elucidate the complex nature of haemolytic activities present in various D. congolensis strains. This was further analysed by measuring their specific phospholipase activities against defined substrates by thin layer chromatography. D. congolensis strains demonstrated haemolytic interactions (synergistic or antagonistic) with other D. congolensis strains and also other species of bacteria. Most isolates expressed lyso-phospholipase-D activity, while various strains also expressed sphingomyelinase-D activity, phospholipase-A versus phosphatidylcholines and/or cephalins, phospholipase-D versus phosphatidylcholines or all these activities, under the culture conditions used.

  11. Strain modification on electronic transport of the phosphorene nanoribbon

    Science.gov (United States)

    Yuan, Yawen; Cheng, Fang

    2017-07-01

    We demonstrate theoretically how local strains can be tailored to control quantum transport of carriers on monolayer armchair and zigzag phosphorene nanoribbon. We find that the electron tunneling is forbidden when the in-plane strain exceeds a critical value. The critical strain is different for different crystal orientation of the ribbons, widths, and incident energies. By tuning the Fermi energy and strain, the channels can be transited from opaque to transparent. Moreover, for the zigzag-phosphorene nanoribbon, the two-fold degenerate quasi-flat edge band splits completely under certain strain. These properties provide us an efficient way to control the transport of monolayer phosphorene-based microstructure.

  12. The genome of Shigella dysenteriae strain Sd1617 comparison to representative strains in evaluating pathogenesis.

    Science.gov (United States)

    Vongsawan, Ajchara A; Kapatral, Vinayak; Vaisvil, Benjamin; Burd, Henry; Serichantalergs, Oralak; Venkatesan, Malabi M; Mason, Carl J

    2015-03-01

    We sequenced and analyzed Shigella dysenteriae strain Sd1617 serotype 1 that is widely used as model strain for vaccine design, trials and research. A combination of next-generation sequencing platforms and assembly yielded two contigs representing a chromosome size of 4.34 Mb and the large virulence plasmid of 177 kb. This genome sequence is compared with other Shigella genomes in order to understand gene complexity and pathogenic factors. © The Author 2015. Published by Oxford University Press on behalf of on behalf of Federation of European Microbiological Society.

  13. Investigation of strain heterogeneities by laser scanning extensometry in strain ageing materials: application to zirconium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Graff, S.; Forest, S.; Strudel, J.L. [Centre des Materiaux / UMR 7633, Ecole des Mines de Paris / CNRS, BP 87, 91003 Evry (France); Dierke, H.; Neuhauser, H. [Institut fur Physik der Kondensierten Materie, 38106 Braunschweig (Germany); Prioul, C. [MSSMAT, Ecole Centrale Paris, Grande Voie des Vignes, 92295 Chatenay-Malabry (France); Bechade, J.L. [SRMA, CEA Saclay, 91191 Gif sur Yvette (France)

    2005-07-01

    Laser scanning extensometry was used to detect and characterize propagating plastic instabilities such as the Luders bands at the millimeter scale. Spatio-temporal plastic heterogeneities are due to either static or dynamic strain ageing (SSA and DSA) phenomena. Regarding zirconium alloys, different type of heterogeneities were observed: their features strongly depended on mechanical test conditions. In one case, they appeared to be non propagating but preserved along the stress-strain curve and were associated with SSA effects such as stress peaks after relaxation periods or after unloading steps with waiting times. In other case, they appeared as non propagating but were not associated with SSA effects. (authors)

  14. Probiotic attributes of autochthonous Lactobacillus rhamnosus strains of human origin.

    Science.gov (United States)

    Pithva, Sheetal; Shekh, Satyamitra; Dave, Jayantilal; Vyas, Bharatkumar Rajiv Manuel

    2014-05-01

    The study was aimed at evaluating the probiotic potential of indigenous autochthonous Lactobacillus rhamnosus strains isolated from infant feces and vaginal mucosa of healthy female. The survival of the selected strains and the two reference strains (L. rhamnosus GG and L. casei Actimel) was 67-81 % at pH 2 and 70-80 % after passage through the simulated gastrointestinal fluid. These strains are able to grow in the presence of 4 % bile salt, 10 % NaCl, and 0.6 % phenol. The cell surface of L. rhamnosus strains is hydrophilic in nature as revealed by bacterial adhesion to hydrocarbons (BATH) assay. Despite this, L. rhamnosus strains showed mucin adherence, autoaggregation and coaggregation properties that are strain-specific. In addition, they produce bile salt hydrolase (BSH) and β-galactosidase activities. L. rhamnosus strains exhibit antimicrobial activity against food spoilage organisms and gastrointestinal pathogens, as well as Candida and Aspergillus spp. L. rhamnosus strains have similar antibiotic susceptibility pattern, and resistance to certain antibiotics is intrinsic or innate. The strains are neither haemolytic nor producer of biogenic amines such as histamine, putrescine, cadaverine and tyramine. Lyophilized cells of L. rhamnosus Fb exhibited probiotic properties demonstrating potential of the strain for technological suitability and in the preparation of diverse probiotic food formulations.

  15. Strain engineering on transmission carriers of monolayer phosphorene

    Science.gov (United States)

    Zhang, Wei; Li, Feng; Hu, Junsong; Zhang, Ping; Yin, Jiuren; Tang, Xianqiong; Jiang, Yong; Wu, Bozhao; Ding, Yanhuai

    2017-11-01

    The effects of uniaxial strain on the structure, band gap and transmission carriers of monolayer phosphorene were investigated by first-principles calculations. The strain induced semiconductor-metal as well as direct–indirect transitions were studied in monolayer phosphorene. The position of CBM which belonged to indirect gap shifts along the direction of the applied strain. We have concluded the change rules of the carrier effective mass when plane strains are applied. In band structure, the sudden decrease of band gap or the new formation of CBM (VBM) causes the unexpected change in carrier effective mass. The effects of zigzag and armchair strain on the effective electron mass in phosphorene are different. The strain along zigzag direction has effects on the electrons effective mass along both zigzag and armchair direction. By contrast, armchair-direction strain seems to affect only on the free electron mass along zigzag direction. For the holes, the effective masses along zigzag direction are largely affected by plane strains while the effective mass along armchair direction exhibits independence in strain processing. The carrier density of monolayer phosphorene at 300 K is calculated about 1.25× {{10}6} cm‑2, which is greatly influenced by the temperature and strain. Strain engineering is an efficient method to improve the carrier density in phosphorene.

  16. Strain characterization of FinFETs using Raman spectroscopy

    International Nuclear Information System (INIS)

    Kaleli, B.; Hemert, T. van; Hueting, R.J.E.; Wolters, R.A.M.

    2013-01-01

    Metal induced strain in the channel region of silicon (Si) fin-field effect transistor (FinFET) devices has been characterized using Raman spectroscopy. The strain originates from the difference in thermal expansion coefficient of Si and titanium-nitride. The Raman map of the device region is used to determine strain in the channel after preparing the device with the focused ion beam milling. Using the Raman peak shift relative to that of relaxed Si, compressive strain values up to – 0.88% have been obtained for a 5 nm wide silicon fin. The strain is found to increase with reducing fin width though it scales less than previously reported results from holographic interferometry. In addition, finite-element method (FEM) simulations have been utilized to analyze the amount of strain generated after thermal processing. It is shown that obtained FEM simulated strain values are in good agreement with the calculated strain values obtained from Raman spectroscopy. - Highlights: ► Strain is characterized in nanoscale devices with Raman spectroscopy. ► There is a fin width dependence of the originated strain. ► Strain levels obtained from this technique is in correlation with device simulations

  17. Clinical strains of acinetobacter classified by DNA-DNA hybridization

    International Nuclear Information System (INIS)

    Tjernberg, I.; Ursing, J.

    1989-01-01

    A collection of Acinetobacter strains consisting of 168 consecutive clinical strains and 30 type and reference strains was studied by DNA-DNA hybridization and a few phenotypic tests. The field strains could be allotted to 13 DNA groups. By means of reference strains ten of these could be identified with groups described by Bouvet and Grimont (1986), while three groups were new; they were given the numbers 13-15. The type strain of A. radioresistens- recently described by Nishimura et al. (1988) - was shown to be a member of DNA group 12, which comprised 31 clinical isolates. Of the 19 strains of A. junii, eight showed hemolytic acitivity on sheep and human blood agar and an additional four strains on human blood agar only. Strains of this species have previously been regarded as non-hemolytic. Reciprocal DNA pairing data for the reference strains of the DNA gropus were treated by UPGMA clustering. The reference strains for A. calcoaceticus, A. baumannii and DNA groups 3 and 13 formed a cluster with about 70% relatedness within the cluster. Other DNA groups joined at levels below 60%. (author)

  18. Clinical strains of acinetobacter classified by DNA-DNA hybridization

    Energy Technology Data Exchange (ETDEWEB)

    Tjernberg, I.; Ursing, J. (Department of Medical Microbiology, University of Lund, Malmoe General Hospital, Malmoe (Sweden))

    1989-01-01

    A collection of Acinetobacter strains consisting of 168 consecutive clinical strains and 30 type and reference strains was studied by DNA-DNA hybridization and a few phenotypic tests. The field strains could be allotted to 13 DNA groups. By means of reference strains ten of these could be identified with groups described by Bouvet and Grimont (1986), while three groups were new; they were given the numbers 13-15. The type strain of A. radioresistens- recently described by Nishimura et al. (1988) - was shown to be a member of DNA group 12, which comprised 31 clinical isolates. Of the 19 strains of A. junii, eight showed hemolytic acitivity on sheep and human blood agar and an additional four strains on human blood agar only. Strains of this species have previously been regarded as non-hemolytic. Reciprocal DNA pairing data for the reference strains of the DNA gropus were treated by UPGMA clustering. The reference strains for A. calcoaceticus, A. baumannii and DNA groups 3 and 13 formed a cluster with about 70% relatedness within the cluster. Other DNA groups joined at levels below 60%. (author).

  19. A Review: Carbon Nanotube-Based Piezoresistive Strain Sensors

    Directory of Open Access Journals (Sweden)

    Waris Obitayo

    2012-01-01

    Full Text Available The use of carbon nanotubes for piezoresistive strain sensors has acquired significant attention due to its unique electromechanical properties. In this comprehensive review paper, we discussed some important aspects of carbon nanotubes for strain sensing at both the nanoscale and macroscale. Carbon nanotubes undergo changes in their band structures when subjected to mechanical deformations. This phenomenon makes them applicable for strain sensing applications. This paper signifies the type of carbon nanotubes best suitable for piezoresistive strain sensors. The electrical resistivities of carbon nanotube thin film increase linearly with strain, making it an ideal material for a piezoresistive strain sensor. Carbon nanotube composite films, which are usually fabricated by mixing small amounts of single-walled or multiwalled carbon nanotubes with selected polymers, have shown promising characteristics of piezoresistive strain sensors. Studies also show that carbon nanotubes display a stable and predictable voltage response as a function of temperature.

  20. Strain Glass as a Novel Multi-functional Material

    Science.gov (United States)

    Wang, Yu; Wang, Dong; Zhou, Yumei; Zhang, Jian; Xue, Dezhen; Ren, Xiaobing

    Strain glass is a frozen disordered state of local lattice strains (nano-martensite domains), which is the third state of the martensitic/ferroelastic system in addition to parent phase and martensite. In this chapter, the key features of strain glass and its multi-functional properties are reviewed. It is shown that strain glass exhibits a number of interesting properties like shape memory effect, superelasticity with narrow hysteresis, tunable damping, together with unusual properties like Invar effect, Elinvar effect as discovered in β-Ti strain glass alloys. All these multi-functional properties stem from the response of the nano-domains of strain glass to temperature change and external stress. With the recent finding of ferromagnetic strain glass, novel magneto-elastic functionalities may be anticipated.

  1. Microstructural evolution in high strength materials at high strain rates

    Science.gov (United States)

    Bassim, M. N.; Bolduc, M.; Odeshi, A. G.; Mirfarkraei, S.

    2006-08-01

    High strength materials such as used as armor plate have been investigated in torsion using Split Hopkinson Bars for the purpose of obtaining stress-strain curves and for examining the mechanism of plastic deformation in terms of mechanical instability due to thermal softening at high strain rates. A comparative study of the plastic deformation behavior of RHA steel, Aluminum 5083 H131 alloy and Tungsten A90S alloy under the loading condition at high strain rates is carried out and the effect of strain rate on shear flow stress and stress-strain profiles is presented. Strain rate sensitivities of the materials are evaluated and discussed with respect to mechanical instability and adiabatic shear strain localization.

  2. MM98.83 Quantification of Combined Strain Paths

    DEFF Research Database (Denmark)

    Nielsen, Morten Sturgård; Lindegren, Maria; Wanheim, Tarras

    1998-01-01

    When working with processes where large plastic deformation occurs, a way of desribing the deformation process is to view the whole deformation history as a curve in the 6-dimensional shear strain normal strain space, henceforth called a strain history curve (SHC). This paper focuses on the SHC...... concept and the uniqueness of the SHC representation.The SHC may be used to give a useful representation of the total course of the deformation with respect to directions and magnitudes of strains, snd hence the development of the plastic properties, butmay also be used for developing variables describing...... 3D-plasticity. Adirect use of the SHC, is to measure the yield surface at different points at a SHC, thus establishing data describing the importance of strain rotations or even strain reversals within a process. Two subcases for displaying SHC will be mentioned:The plane strain case and the single...

  3. Physics of strained quantum well lasers

    CERN Document Server

    Loehr, John P

    1998-01-01

    When this publisher offered me the opportunity to \\\\Tite a book, some six years ago, I did not hesitate to say yes. I had just spent the last four years of graduate school struggling to understand the physics of strained quantum well lasers, and it seemed to me the whole experience was much more difficult that it should have been. For although many of the results I needed were easy to locate, the underlying physical premises and intervening steps were not. If only I had a book providing the derivations, I could have absorbed them and gone on my way. Such a book lies before you. It provides a unified and self-contained descrip­ tion of the essential physics of strained quantum well lasers, starting from first principles whenever feasible. The presentation I have chosen requires only the standard introductory background in quantum mechanics, solid state physics, and electromagnetics expected of entering graduate students in physics or elec­ trical engineering. A single undergraduate course in each of these su...

  4. Strain engineered pyrochlore at high pressure

    Energy Technology Data Exchange (ETDEWEB)

    Rittman, Dylan R.; Turner, Katlyn M.; Park, Sulgiye; Fuentes, Antonio F.; Park, Changyong; Ewing, Rodney C.; Mao, Wendy L.

    2017-05-22

    Strain engineering is a promising method for next-generation materials processing techniques. Here, we use mechanical milling and annealing followed by compression in diamond anvil cell to tailor the intrinsic and extrinsic strain in pyrochlore, Dy2Ti2O7 and Dy2Zr2O7. Raman spectroscopy, X-ray pair distribution function analysis, and X-ray diffraction were used to characterize atomic order over short-, medium-, and long-range spatial scales, respectively, under ambient conditions. Raman spectroscopy and X-ray diffraction were further employed to interrogate the material in situ at high pressure. High-pressure behavior is found to depend on the species and concentration of defects in the sample at ambient conditions. Overall, we show that defects can be engineered to lower the phase transformation onset pressure by ~50% in the ordered pyrochlore Dy2Zr2O7, and lower the phase transformation completion pressure by ~20% in the disordered pyrochlore Dy2Zr2O7. These improvements are achieved without significantly sacrificing mechanical integrity, as characterized by bulk modulus.

  5. Banana (Musa. spp.) strain HD-1 appraisal

    International Nuclear Information System (INIS)

    Longyan, G.; Xinguo, L.; Lingxia, W.; Xuefei, J.

    2016-01-01

    Being one of the important tropical and subtropical fruit trees, banana (Musa spp.) belongs to the family Musaceae and the order Scitaminae with two genera, Musa and Ensete. In a field survey, research team has discovered a potential banana mutant strain HD-1 with a sound economic value. The results of the finding are as follows: based on Simmonds classification, the pseudostem of banana strain HD-1 is relatively short and purplish red; its upright outward petiole groove has red edges and wraps its pseudostem loosely. Its ploidy is 3, AAA type. Karyotype analysis shows that the number of chromosomes is 33, the karyotype formula is 2n=3x=33=2L + 3 M2 + 4 M1 + 2 S, HD-1 is classified as 1B type. With the help of ISSR molecular markers, we find thatbanana HD-1 has the closest relationship with Pubei and Tianbao dwarf banana; the similarity coefficient is 0.81. In an artificial simulation tests of cold, drought and salt resistance environment changes of physiological and biochemical indexes indicate that HD-1 exhibits stronger defense capability than Brazil banana. By way of inoculation with injury of root dipping method, we respectively treat two kinds of banana seedlings inoculated Banana Fusarium wilt race 4 small species. The results show that their resistance evaluation scores are 3 and 4, disease levels are susceptible and high sensitivity respectively. We conclude that HD-1 has stronger resistance ability to Fusarium wilt than Brazil banana. (author)

  6. Substrate-induced strain in carbon nanodisks

    International Nuclear Information System (INIS)

    Osváth, Z.; Vértesy, Z.; Lábár, J.; Nemes-Incze, P.; Horváth, Z.E.; Biró, L.P.

    2014-01-01

    Graphitic nanodisks of typically 20–50 nm in thickness, produced by the so-called Kvaerner Carbon Black and Hydrogen Process were dispersed on gold substrate and investigated by atomic force microscopy (AFM), field emission scanning electron microscopy (FE-SEM), and confocal Raman spectroscopy. The roughness of the gold surface was drastically changed by annealing at 400 °C. AFM measurements show that this change in the surface roughness induces changes also in the topography of the nanodisks, as they closely follow the corrugation of the gold substrate. This leads to strained nanodisks, which is confirmed also by confocal Raman microscopy. We found that the FE-SEM contrast obtained from the disks depends on the working distance used during the image acquisition by In-lens detection, a phenomenon which we explain by the decrease in the amount of electrons reaching the detector due to diffraction. This process may affect the image contrast in the case of other layered materials, like hexagonal boron nitride, and other planar hybrid nanostructures, too. - Highlights: • Bending of carbon nanodisks is induced by the roughness of the gold substrate. • Confocal Raman microscopy shows a compressive strain induced in the nanodisks. • The electron microscopy contrast of nanodisks depends on the working distance

  7. Strain, Stress and Seismicity pattern in Switzerland

    Science.gov (United States)

    Houlié, Nicolas; Woessner, Jochen; Villiger, Arturo; Deichmann, Nicholas; Rothacher, Markus; Giardini, Domenico; Geiger, Alain

    2013-04-01

    Switzerland lies across one of the most complex plate boundary in the world. With a 100 Ma of deformation history, and a wide diversity of deformation mechanism, it is an ideal place to study the link(s) between small strain rates measured at the surface and stress dissipated at depth. The link is of genuine interest for seismic hazard assessment as it provides an independent estimate for moment release within the seismogenic volume. We use geodetic (GPS velocities, shortening axes, strain maps) and seismic (anisotropy, P-axes, focal mechanisms) datasets in order to assess whether the stress accumulated at depth due to the continental collision reflects the deformation rates measured at the surface and correlates with the seismic activity as well as the stress directions deduced from earthquake focal mechanisms throughout the area - or not. While the deformation amplitudes of the area are small (less than 10-7 yr-1) in some areas of Switzerland, we can relate long- and short-term features of the tectonic processes occurring over the last 10+ Ma. Preliminary results suggest that while deformation rates measured by GPS are large in the Ticino compared to the Valais region - its seismic activity rate is lower. This implies other processes might play important roles in the generation of seismicity.

  8. Lattice strain measurement in rock sample by neutron diffraction technique

    International Nuclear Information System (INIS)

    Abe, Jun; Ito, Takayoshi; Sekine, Kotaro; Harjo, Stefanus; Aizawa, Kazuya

    2015-01-01

    Strain gauge and mechanical extensometers are commonly used to measure strain in rock samples. In recent years, diffraction techniques with X-rays and neutrons for investigating strain in engineering materials have been developed. Strain measurements using diffraction technique are based on Bragg's law. Lattice spacing changes with strain, which induces peak shift of Bragg peak. Strain value can be estimated from this peak shift value. Strain measurements using the world's highest intensity neutron beam can be performed at Japan Proton Accelerator Research Complex (J-PARC) constructed at Tokai in Ibaraki. Neutron powder diffractometer dedicating to investigate strain state in engineering materials has been constructed at BL19 in J-PARC, which is named as The Engineering Materials Diffractometer 'TAKUMI'. In order to examine applicability of the diffractometer to rock materials, in situ neutron diffraction experiments on rock samples under uni-axial compression have been performed. Higher resolution strain data has been obtained in shorter time compared to other diffractometers. In addition, neutron diffraction peaks of not only major component, such as quartz, but also minor components, such as feldspars, could be observed. Anisotropy of strain with respect to the quartz crystal orientation and discrepancy between macroscopic strain (measured by strain gauge) and lattice strain (measured by neutron diffraction) were also recognized. Change in peak width with respect to stress magnitude showed a different behavior depending on rock type. Strain measurements using neutron diffraction technique give us new insight in rock deformation which cannot be obtained by common technique. (author)

  9. Uniaxial tension test on Rubber at constant true strain rate

    Directory of Open Access Journals (Sweden)

    Sourne H.L.

    2012-08-01

    Full Text Available Elastomers are widely used for damping parts in different industrial contexts because of their remarkable dissipation properties. Indeed, they can undergo severe mechanical loading conditions, i.e., high strain rates and large strains. Nevertheless, the mechanical response of these materials can vary from purely rubber-like to glassy depending on the strain rate undergone. Classically, uniaxial tension tests are made in order to find a relation between the stress and the strain in the material at various strain rates. However, even if the strain rate is searched to be constant, it is the nominal strain rate that is considered. Here we develop a test at constant true strain rate, i.e. the strain rate that is experienced by the material. In order to do such a test, the displacement imposed by the machine is an exponential function of time. This test has been performed with a high speed hydraulic machine for strain rates between 0.01/s and 100/s. A specific specimen has been designed, yielding a uniform strain field (and so a uniform stress field. Furthermore, an instrumented aluminum bar has been used to take into account dynamic effects in the measurement of the applied force. A high speed camera enables the determination of strain in the sample using point tracking technique. Using this method, the stress-strain curve of a rubber-like material during a loading-unloading cycle has been determined, up to a stretch ratio λ = 2.5. The influence of the true strain rate both on stiffness and on dissipation of the material is then discussed.

  10. Splicing landscape of the eight collaborative cross founder strains.

    Science.gov (United States)

    Zheng, Christina L; Wilmot, Beth; Walter, Nicole Ar; Oberbeck, Denesa; Kawane, Sunita; Searles, Robert P; McWeeney, Shannon K; Hitzemann, Robert

    2015-02-05

    The Collaborative Cross (CC) is a large panel of genetically diverse recombinant inbred mouse strains specifically designed to provide a systems genetics resource for the study of complex traits. In part, the utility of the CC stems from the extensive genome-wide annotations of founder strain sequence and structural variation. Still missing, however, are transcriptome-specific annotations of the CC founder strains that could further enhance the utility of this resource. We provide a comprehensive survey of the splicing landscape of the 8 CC founder strains by leveraging the high level of alternative splicing within the brain. Using deep transcriptome sequencing, we found that a majority of the splicing landscape is conserved among the 8 strains, with ~65% of junctions being shared by at least 2 strains. We, however, found a large number of potential strain-specific splicing events as well, with an average of ~3000 and ~500 with ≥3 and ≥10 sequence read coverage, respectively, within each strain. To better understand strain-specific splicing within the CC founder strains, we defined criteria for and identified high-confidence strain-specific splicing events. These splicing events were defined as exon-exon junctions 1) found within only one strain, 2) with a read coverage ≥10, and 3) defined by a canonical splice site. With these criteria, a total of 1509 high-confidence strain-specific splicing events were identified, with the majority found within two of the wild-derived strains, CAST and PWK. Strikingly, the overwhelming majority, 94%, of these strain-specific splicing events are not yet annotated. Strain-specific splicing was also located within genomic regions recently reported to be over- and under-represented within CC populations. Phenotypic characterization of CC populations is increasing; thus these results will not only aid in further elucidating the transcriptomic architecture of the individual CC founder strains, but they will also help in guiding

  11. Efficient characterization of inhomogeneity in contraction strain pattern.

    Science.gov (United States)

    Nazzal, Christina M; Mulligan, Lawrence J; Criscione, John C

    2012-05-01

    Cardiac dyssynchrony often accompanies patients with heart failure (HF) and can lead to an increase in mortality rate. Cardiac resynchronization therapy (CRT) has been shown to provide substantial benefits to the HF population with ventricular dyssynchrony; however, there still exists a group of patients who do not respond to this treatment. In order to better understand patient response to CRT, it is necessary to quantitatively characterize both electrical and mechanical dyssynchrony. The quantification of mechanical dyssynchrony via characterization of contraction strain field inhomogeneity is the focus of this modeling investigation. Raw data from a 3D finite element (FE) model were received from Roy Kerckhoffs et al. and analyzed in MATLAB. The FE model consisted of canine left and right ventricles coupled to a closed circulation with the effects of the pericardium acting as a pressure on the epicardial surface. For each of three simulations (normal synchronous, SYNC, right ventricular apical pacing, RVA, and left ventricular free wall pacing, LVFW) the Gauss point locations and values were used to generate lookup tables (LUTs) with each entry representing a location in the heart. In essence, we employed piecewise cubic interpolation to generate a fine point cloud (LUTs) from a course point cloud (Gauss points). Strain was calculated in the fiber direction and was then displayed in multiple ways to better characterize strain inhomogeneity. By plotting average strain and standard deviation over time, the point of maximum contraction and the point of maximal inhomogeneity were found for each simulation. Strain values were organized into seven strain bins to show operative strain ranges and extent of inhomogeneity throughout the heart wall. In order to visualize strain propagation, magnitude, and inhomogeneity over time, we created 2D area maps displaying strain over the entire cardiac cycle. To visualize spatial strain distribution at the time point of maximum

  12. Bacillus amyloliquefaciens strain 32a as a source of lipopeptides for biocontrol of Agrobacterium tumefaciens strains.

    Science.gov (United States)

    Ben Abdallah, D; Frikha-Gargouri, O; Tounsi, S

    2015-07-01

    A Bacillus amyloliquefaciens strain, designated 32a, was used to identify new compounds active against Agrobacterium tumefaciens and to evaluate their efficiency to control crown gall on carrot discs. Based on PCR-assays, four gene clusters were shown to direct the synthesis of the cyclic lipopeptides surfactin, iturin A, bacillomycin D and fengycin. Mass spectrometry analysis of culture supernatant led to the identification of these secondary metabolites, except bacillomycin, with heterogeneous mixture of homologues. Antimicrobial assays using lipopeptides-enriched extract showed a strong inhibitory activity against several bacterial and fungal strains, including Ag. tumefaciens. Biological control assays on carrot discs using both 32a spores and extract resulted in significant protection against crown gall disease, similar to that provided by the reference antagonistic strain Agrobacterium rhizogenes K1026. In contrast to all active compounds against Ag. tumefaciens that are of proteinaceous nature, this work enables for the first time to correlate the strong protective effect of B. amyloliquefaciens strain 32a towards crown gall disease with the production of a mixture of lipopeptides. The findings could be useful for growers and nursery men who are particularly interested in the biocontrol of the crown gall disease. © 2015 The Society for Applied Microbiology.

  13. Genome Sequence of Campylobacter jejuni strain 327, a strain isolated from a turkey slaughterhouse

    DEFF Research Database (Denmark)

    Takamiya, Monica; Özen, Asli Ismihan; Rasmussen, Morten

    2011-01-01

    , catalase positive bacterium obtains energy from the metabolism of amino acids and Krebs cycle intermediates. Strain 327 was isolated from a turkey slaughter production line and is considered environmentally sensitive to food processing (cold, heat, drying) and storage conditions. The 327 whole genome...

  14. Application of fiber optic grating strain sensor for measurement of strain under irradiation environment

    International Nuclear Information System (INIS)

    Kaji, Y.; Matsui, Y.; Kita, S.; Ide, H.; Tsukada, T.; Tsuji, H.

    2001-01-01

    In Japan Atomic Energy Research Institute (JAERI), in-pile strain measurement techniques have been developed using Japan Materials Testing Reactor (JMTR). In order to evaluate the performance of fiber optic grating sensor under irradiation environment, heat-up and performance tests at elevated temperature before irradiation and in-pile tests were performed in JMTR. (author)

  15. Physical nature of strain rate sensitivity of metals and alloys at high strain rates

    Science.gov (United States)

    Borodin, E. N.; Gruzdkov, A. A.; Mayer, A. E.; Selyutina, N. S.

    2018-04-01

    The role of instabilities of plastic flow at plastic deformation of various materials is one of the important cross-disciplinary problems which is equally important in physics, mechanics and material science. The strain rate sensitivities under slow and high strain rate conditions of loading have different physical nature. In the case of low strain rate, the sensitivity arising from the inertness of the defect structures evolution can be expressed by a single parameter characterizing the plasticity mechanism. In our approach, this is the value of the characteristic relaxation time. In the dynamic case, there are additional effects of “high-speed sensitivity” associated with the micro-localization of the plastic flow near the stress concentrators. In the frames of mechanical description, this requires to introduce additional strain rate sensitivity parameters, which is realized in numerous modifications of Johnson–Cook and Zerilli–Armstrong models. The consideration of both these factors is fundamental for an adequate description of the problems of dynamic deformation of highly inhomogeneous metallic materials such as steels and alloys. The measurement of the dispersion of particle velocities on the free surface of a shock-loaded material can be regarded as an experimental expression of the effect of micro-localization. This is also confirmed by our results of numerical simulation of the propagation of shock waves in a two-dimensional formulation and analytical estimations.

  16. Total strain version of strainrange partitioning for thermomechanical fatigue at low strains

    Science.gov (United States)

    Halford, G. R.; Saltsman, J. F.

    1987-01-01

    A new method is proposed for characterizing and predicting the thermal fatigue behavior of materials. The method is based on three innovations in characterizing high temperature material behavior: (1) the bithermal concept of fatigue testing; (2) advanced, nonlinear, cyclic constitutive models; and (3) the total strain version of traditional strainrange partitioning.

  17. Strain bidimensional na cardiopatia de Takotsubo Two-dimensional strain in Takotsubo cardiomyopathy

    Directory of Open Access Journals (Sweden)

    Carlos Bellini G. Gomes

    2010-08-01

    Full Text Available Este relato apresenta o seguimento tardio de um caso de cardiomiopatia de Takotsubo com boa evolução clínica e melhora da função sistólica global ventricular esquerda. Contudo, observou-se persistência de significativa disfunção sistólica regional longitudinal que foi avaliada por meio de nova técnica ecocardiográfica (speckle tracking, com as medidas do strain (S e strain rate (SR correspondentes. Ressaltamos a importância desse novo método para o acompanhamento dessa cardiopatia, pois permite identificar os pacientes que persistem com disfunção sistólica e que possivelmente serão beneficiados com a manutenção da terapêutica clínica.This report presents the late follow-up of a case of Takotsubo cardiomyopathy with good clinical outcome and improved left ventricular global systolic function. However, there was persistence of significant regional longitudinal systolic dysfunction evaluated using a new echocardiographic technique (speckle tracking, with corresponding measures of strain (S and strain rate (SR. We emphasize the importance of this new method to monitoring this cardiomyopathy, since it identifies patients with persistent systolic dysfunction who will possibly benefit from maintenance of clinical therapy

  18. STRAIN RATE EFFECT ON THE FAILURE STRAIN AND HARDNESS OF METALLIC ARMOR PLATES SUBJECTED TO HIGH VELOCITY PROJECTILE IMPACT

    Directory of Open Access Journals (Sweden)

    QASIM H. SHAH

    2006-12-01

    Full Text Available Post impact strain measurements of damaged plates were carried out experimentally after launching a spherical steel projectile at varying velocities against a fixed thin plate targets made of copper and steel materials and constrained at their outer periphery. Penetration or partial perforation of the target plates was achieved for projectile velocities of 120 m/s. The strain rates achieved during the experiments varied from 8000s-1 to 15000 s-1 for steel specimens and from 9000 s-1 to 19000 s-1 for copper specimens for the projectile speeds of 68 to 120 m/s. Strain measurements for static and dynamic loading showed that steel deformation is excessive before failure resulting in higher failure strain at high strain rates while the failure strain for copper at high loading rates causes separation of material before reaching very large strains. At the same loading rates the plate thinning of steel was recorded to be severe than copper. Hardness values of materials subjected to high strain rate were measured experimentally showing a strong dependency upon strain rates calculated by using LS-DYNA software. Strain rate effect on the failure strain of metals was investigated.

  19. The MG1363 and IL1403 Laboratory Strains of Lactococcus lactis and Several Dairy Strains Are Diploid▿ †

    Science.gov (United States)

    Michelsen, Ole; Hansen, Flemming G.; Albrechtsen, Bjarne; Jensen, Peter Ruhdal

    2010-01-01

    Bacteria are normally haploid, maintaining one copy of their genome in one circular chromosome. We have examined the cell cycle of laboratory strains of Lactococcus lactis, and, to our surprise, we found that some of these strains were born with two complete nonreplicating chromosomes. We determined the cellular content of DNA by flow cytometry and by radioactive labeling of the DNA. These strains thus fulfill the criterion of being diploid. Several dairy strains were also found to be diploid while a nondairy strain and several other dairy strains were haploid in slow-growing culture. The diploid and haploid strains differed in their sensitivity toward UV light, in their cell size, and in their D period, the period between termination of DNA replication and cell division. PMID:20023021

  20. The MG1363 and IL1403 laboratory strains of Lactococcus lactis and several dairy strains are diploid.

    Science.gov (United States)

    Michelsen, Ole; Hansen, Flemming G; Albrechtsen, Bjarne; Jensen, Peter Ruhdal

    2010-02-01

    Bacteria are normally haploid, maintaining one copy of their genome in one circular chromosome. We have examined the cell cycle of laboratory strains of Lactococcus lactis, and, to our surprise, we found that some of these strains were born with two complete nonreplicating chromosomes. We determined the cellular content of DNA by flow cytometry and by radioactive labeling of the DNA. These strains thus fulfill the criterion of being diploid. Several dairy strains were also found to be diploid while a nondairy strain and several other dairy strains were haploid in slow-growing culture. The diploid and haploid strains differed in their sensitivity toward UV light, in their cell size, and in their D period, the period between termination of DNA replication and cell division.

  1. Strain characterization in SOI and strained-Si on SGOI MOSFET channel using nano-beam electron diffraction (NBD)

    International Nuclear Information System (INIS)

    Usuda, Koji; Numata, Toshinori; Irisawa, Toshifumi; Hirashita, Norio; Takagi, Shinichi

    2005-01-01

    SOI MOSFETs are attractive device structures for high-performance CMOS because they offer the advantages of high-speed and low-power-dissipation operation. For next-generation devices, the combination of strained-Si channels and SOI substrates can be the optimum structure and, thus, we have developed strained-Si MOSFETs on thin relaxed SiGe-on-insulator (SGOI) substrates. However, the strain evaluation within the very thin and small SOI layers after device fabrication processes has not been investigated in detail yet because a strain evaluation method with lateral resolution of several nm, which can be applied directly to samples, has not been available. In this paper, we present a direct and two-dimensional strain evaluation with high spatial resolution using the nano-beam electron diffraction (NBD) method and results of direct strain measurements for conventional SOI and strained-Si on SGOI MOSFET channels

  2. The MG1363 and IL1403 Laboratory Strains of Lactococcus lactis and Several Dairy Strains Are Diploid

    DEFF Research Database (Denmark)

    Michelsen, Ole; Hansen, Flemming G.; Albrechtsen, B.

    2010-01-01

    Bacteria are normally haploid, maintaining one copy of their genome in one circular chromosome. We have examined the cell cycle of laboratory strains of Lactococcus lactis, and, to our surprise, we found that some of these strains were born with two complete nonreplicating chromosomes. We...... determined the cellular content of DNA by flow cytometry and by radioactive labeling of the DNA. These strains thus fulfill the criterion of being diploid. Several dairy strains were also found to be diploid while a nondairy strain and several other dairy strains were haploid in slow-growing culture....... The diploid and haploid strains differed in their sensitivity toward UV light, in their cell size, and in their D period, the period between termination of DNA replication and cell division....

  3. Finite Element Modeling of the Behavior of Armor Materials Under High Strain Rates and Large Strains

    Science.gov (United States)

    Polyzois, Ioannis

    For years high strength steels and alloys have been widely used by the military for making armor plates. Advances in technology have led to the development of materials with improved resistance to penetration and deformation. Until recently, the behavior of these materials under high strain rates and large strains has been primarily based on laboratory testing using the Split Hopkinson Pressure Bar apparatus. With the advent of sophisticated computer programs, computer modeling and finite element simulations are being developed to predict the deformation behavior of these metals for a variety of conditions similar to those experienced during combat. In the present investigation, a modified direct impact Split Hopkinson Pressure Bar apparatus was modeled using the finite element software ABAQUS 6.8 for the purpose of simulating high strain rate compression of specimens of three armor materials: maraging steel 300, high hardness armor (HHA), and aluminum alloy 5083. These armor materials, provided by the Canadian Department of National Defence, were tested at the University of Manitoba by others. In this study, the empirical Johnson-Cook visco-plastic and damage models were used to simulate the deformation behavior obtained experimentally. A series of stress-time plots at various projectile impact momenta were produced and verified by comparison with experimental data. The impact momentum parameter was chosen rather than projectile velocity to normalize the initial conditions for each simulation. Phenomena such as the formation of adiabatic shear bands caused by deformation at high strains and strain rates were investigated through simulations. It was found that the Johnson-Cook model can accurately simulate the behavior of body-centered cubic (BCC) metals such as steels. The maximum shear stress was calculated for each simulation at various impact momenta. The finite element model showed that shear failure first occurred in the center of the cylindrical specimen and

  4. Resonant tunneling measurements of size-induced strain relaxation

    Science.gov (United States)

    Akyuz, Can Deniz

    Lattice mismatch strain available in such semiconductor heterostructures as Si/SiGe or GaAs/AlGaAs can be employed to alter the electronic and optoelectronic properties of semiconductor structures and devices. When deep submicron structures are fabricated from strained material, strained layers relax by sidewall expansion giving rise to size- and geometry-dependent strain gradients throughout the structure. This thesis describes a novel experimental technique to probe the size-induced strain relaxation by studying the tunneling current characteristics of strained p-type Si/SiGe resonant tunneling diodes. Our current-voltage measurements on submicron strained p-Si/SiGe double- and triple-barrier resonant tunneling structures as a function of device diameter, D, provide experimental access to both the average strain relaxation (which leads to relative shifts in the tunneling current peak positions) and strain gradients (which give rise to a fine structure in the current peaks due to inhomogeneous strain-induced lateral quantization). We find that strain relaxation is significant, with a large fraction of the strain energy relaxed on average in D ≤ 0.25 m m devices. Further, the in-plane potentials that arise from inhomogeneous strain gradients are large. In the D ˜ 0.2 m m devices, the corresponding lateral potentials are approximately parabolic exceeding ˜ 25 meV near the perimeter. These potentials create discrete hole states in double-barrier structures (single well), and coupled hole states in triple-barrier structures (two wells). Our results are in excellent agreement with finite-element strain calculations in which the strained layers are permitted to relax to a state of minimum energy by sidewall expansion. Size-induced strain relaxation will undoubtedly become a serious technological issue once strained devices are scaled down to the deep submicron regime. Interestingly, our calculations predict and our measurements are consistent with the appearance of

  5. Characterization of the relationship between systolic shear strain and early diastolic shear strain rates: insights into torsional recoil.

    Science.gov (United States)

    Thompson, Richard B; Paterson, Ian; Chow, Kelvin; Cheng-Baron, June; Scott, Jessica M; Esch, Ben T; Ennis, Daniel B; Haykowsky, Mark J

    2010-09-01

    Early diastolic left ventricular (LV) untwisting has been evaluated as a manifestation of LV recoil, reflecting the release of elastic energy stored during systole. The primary goal of this study was to characterize the relationship between systolic strain (e.g., circumferential strain and the shear strains that comprise twist) with the resulting early diastolic shear strain rates, including the rate of untwisting. A further goal was to characterize these relationships regionally from apical to basal locations. Cardiac magnetic resonance imaging tissue tagging was used to measure circumferential strain, global and regional (apex, mid, basal) twist (theta), and circumferential-longitudinal (epsilon(CL)) and circumferential-radial (epsilon(CR)) shear strains along with the corresponding untwisting rates (dtheta/dt) and diastolic shear strain rates (depsilon/dt) in 32 healthy males (33 +/- 7 yr). LV untwisting rates and shear strain rates measured during early diastole varied significantly with the measurement location from apex to base (P 0.05). Normalization of the untwisting rates to the peak twist (dtheta/dt(Norm) = -13.6 +/- 2.1 s(-1)) or shear strain rates to peak systolic shear strain (depsilon(CL)/dt(Norm) = -15.0 +/- 5.4 s(-1), and depsilon(CR)/dt(Norm) = -14.2 +/- 7.7 s(-1)) yielded a uniform measure of early diastolic function that was similar for all shear strain and twist components and for all locations from apex to base. These findings support a linear model of torsional recoil in the healthy heart, where diastolic shear strain rates (e.g., untwisting rates) are linearly related to the corresponding preceding systolic shear stain component. Furthermore, these findings suggest that torsional recoil is uncoupled from end-systolic volumes or the associated strains, such as circumferential strain.

  6. Bacteriocin-like inhibitory activities of seven Lactobacillus delbrueckii subsp. bulgaricus strains against antibiotic susceptible and resistant Helicobacter pylori strains.

    Science.gov (United States)

    Boyanova, L; Gergova, G; Markovska, R; Yordanov, D; Mitov, I

    2017-12-01

    The aim of the study was to detect anti-Helicobacter pylori activity of seven Lactobacillus delbrueckii subsp. bulgaricus (GLB) strains by four cell-free supernatant (CFS) types. Activity of non-neutralized and non-heat-treated (CFSs1), non-neutralized and heat-treated (CFSs2), pH neutralized, catalase-treated and non-heat-treated (CFSs3), or neutralized, catalase- and heat-treated (CFSs4) CFSs against 18 H. pylori strains (11 of which with antibiotic resistance) was evaluated. All GLB strains produced bacteriocin-like inhibitory substances (BLISs), the neutralized CFSs of two GLB strains inhibited >81% of test strains and those of four GLB strains were active against >71% of antibiotic resistant strains. Two H. pylori strains were BLIS resistant. The heating did not reduce the CFS activity. Briefly, all GLB strains evaluated produced heat-stable BLISs, although GLB and H. pylori strain susceptibility patterns exhibited differences. Bacteriocin-like inhibitory substance activity can be an advantage for the probiotic choice for H. pylori infection control. In this study, anti-Helicobacter pylori activity of seven Lactobacillus delbrueckii subsp. bulgaricus (GLB) strains was evaluated by four cell-free supernatant (CFS) types. The GLB strains produced heat-stable bacteriocin-like inhibitory substances (BLISs) with a strong anti-H. pylori activity and some neutralized, catalase- and heat-treated CFSs inhibited >83% of the test strains. Bacteriocin-like inhibitory substance production of GLB strains can render them valuable probiotics in the control of H. pylori infection. © 2017 The Society for Applied Microbiology.

  7. Plastic strain caused by contraction of pores in polycrystalline graphites

    International Nuclear Information System (INIS)

    Ioka, Ikuo; Yoda, Shinichi; Konishi, Takashi.

    1989-01-01

    The effects of porosity on mechanical properties and deformation behavior of four isotropic polycrystalline graphites were studied. The pore size distributions of the graphites were measured using a conventional mercury penetration technique. The average pore radius of ISO-88 graphite was about one-tenth of that of ISEM-1, IG-11 or IG-15 graphites. Young's modulus of the graphites decreased with increasing porosity. The stress-strain curve of each graphite was measured in its lateral and axial directions. Young's modulus of graphite decreased with increasing load. The plastic strain at a given compressive load was calculated from the stress-strain curve and the initial gradient of the unloading curve at the load. The ratio of lateral plastic strain to axial plastic strain for the graphites was less than 0.5, indicating that the volume of the graphites decreased during compressive loading. By assuming that the volume change was caused by contraction of pores, plastic strain associated with contraction of pores was calculated from the axial plastic strain and lateral plastic strain by slips along the basal planes. The plastic strain increased with increasing axial plastic strain and porosity of graphite. (author)

  8. Antimicrobial drug susceptibility of Neisseria meningitidis strains isolated from carriers

    Directory of Open Access Journals (Sweden)

    Dayamí García

    2000-06-01

    Full Text Available When it is necessary to determine the susceptibility of Neisseria meningitidis (Nm strains to antimicrobial drugs, it is important to consider that it should be analyzed in a double context. One of them related to the use of drugs in a specific medical treatment; and the other; to chemoprophylatic drugs, both with the same purpose: the accurate selection of the “in vivo” antimicrobial agent. This requires the study of the sensitivity and resistance of strains isolated in both carriers and patients. With the aim of further studying the behavior of the strains that currently circulate in Cuba, an antimicrobial drug susceptibility study was conducted in 90 strains isolated from carriers during the first half of 1998. The agar dilution method was used to determine the minimum inhibitory concentrations (MICs to: penicillin, ampicillin, rifampin, sulfadiazine, chloramphenicol, ciprofloxacin, ceftriaxone, cefotaxime. The study of the three latter drugs was done for the first time in our country. The search for β- lactamase-producer strains was also performed. There was a predominance of penicillin sensitive strains (82,2% with an intermediate sensitivity to ampicillin (57,8%, while 70% of the strains were sensitive to sulfadiazine. Regarding the rest of the antimicrobial drugs, 100% of the strains were sensitive. The paper shows the MICs for each drug as well as the phenotypic characteristics of the strains with the penicillin and sulfadiazine sensitivity and resistance patterns. No β-lactamase-producer strains were found.

  9. Identification of Bacillus Strains for Biological Control of Catfish Pathogens

    Science.gov (United States)

    Ran, Chao; Carrias, Abel; Williams, Malachi A.; Capps, Nancy; Dan, Bui C. T.; Newton, Joseph C.; Kloepper, Joseph W.; Ooi, Ei L.; Browdy, Craig L.; Terhune, Jeffery S.; Liles, Mark R.

    2012-01-01

    Bacillus strains isolated from soil or channel catfish intestine were screened for their antagonism against Edwardsiella ictaluri and Aeromonas hydrophila, the causative agents of enteric septicemia of catfish (ESC) and motile aeromonad septicaemia (MAS), respectively. Twenty one strains were selected and their antagonistic activity against other aquatic pathogens was also tested. Each of the top 21 strains expressed antagonistic activity against multiple aquatic bacterial pathogens including Edwardsiella tarda, Streptococcus iniae, Yersinia ruckeri, Flavobacterium columnare, and/or the oomycete Saprolegnia ferax. Survival of the 21 Bacillus strains in the intestine of catfish was determined as Bacillus CFU/g of intestinal tissue of catfish after feeding Bacillus spore-supplemented feed for seven days followed by normal feed for three days. Five Bacillus strains that showed good antimicrobial activity and intestinal survival were incorporated into feed in spore form at a dose of 8×107 CFU/g and fed to channel catfish for 14 days before they were challenged by E. ictaluri in replicate. Two Bacillus subtilis strains conferred significant benefit in reducing catfish mortality (PBacillus strains also showed protective effects against E. ictaluri in striped catfish. Safety of the four strains exhibiting the strongest biological control in vivo was also investigated in terms of whether the strains contain plasmids or express resistance to clinically important antibiotics. The Bacillus strains identified from this study have good potential to mediate disease control as probiotic feed additives for catfish aquaculture. PMID:23029244

  10. Identification of Bacillus strains for biological control of catfish pathogens.

    Science.gov (United States)

    Ran, Chao; Carrias, Abel; Williams, Malachi A; Capps, Nancy; Dan, Bui C T; Newton, Joseph C; Kloepper, Joseph W; Ooi, Ei L; Browdy, Craig L; Terhune, Jeffery S; Liles, Mark R

    2012-01-01

    Bacillus strains isolated from soil or channel catfish intestine were screened for their antagonism against Edwardsiella ictaluri and Aeromonas hydrophila, the causative agents of enteric septicemia of catfish (ESC) and motile aeromonad septicaemia (MAS), respectively. Twenty one strains were selected and their antagonistic activity against other aquatic pathogens was also tested. Each of the top 21 strains expressed antagonistic activity against multiple aquatic bacterial pathogens including Edwardsiella tarda, Streptococcus iniae, Yersinia ruckeri, Flavobacterium columnare, and/or the oomycete Saprolegnia ferax. Survival of the 21 Bacillus strains in the intestine of catfish was determined as Bacillus CFU/g of intestinal tissue of catfish after feeding Bacillus spore-supplemented feed for seven days followed by normal feed for three days. Five Bacillus strains that showed good antimicrobial activity and intestinal survival were incorporated into feed in spore form at a dose of 8×10(7) CFU/g and fed to channel catfish for 14 days before they were challenged by E. ictaluri in replicate. Two Bacillus subtilis strains conferred significant benefit in reducing catfish mortality (PBacillus strains also showed protective effects against E. ictaluri in striped catfish. Safety of the four strains exhibiting the strongest biological control in vivo was also investigated in terms of whether the strains contain plasmids or express resistance to clinically important antibiotics. The Bacillus strains identified from this study have good potential to mediate disease control as probiotic feed additives for catfish aquaculture.

  11. Curvature reduces bending strains in the quokka femur

    Directory of Open Access Journals (Sweden)

    Kyle McCabe

    2017-03-01

    Full Text Available This study explores how curvature in the quokka femur may help to reduce bending strain during locomotion. The quokka is a small wallaby, but the curvature of the femur and the muscles active during stance phase are similar to most quadrupedal mammals. Our hypothesis is that the action of hip extensor and ankle plantarflexor muscles during stance phase place cranial bending strains that act to reduce the caudal curvature of the femur. Knee extensors and biarticular muscles that span the femur longitudinally create caudal bending strains in the caudally curved (concave caudal side bone. These opposing strains can balance each other and result in less strain on the bone. We test this idea by comparing the performance of a normally curved finite element model of the quokka femur to a digitally straightened version of the same bone. The normally curved model is indeed less strained than the straightened version. To further examine the relationship between curvature and the strains in the femoral models, we also tested an extra-curved and a reverse-curved version with the same loads. There appears to be a linear relationship between the curvature and the strains experienced by the models. These results demonstrate that longitudinal curvature in bones may be a manipulable mechanism whereby bone can induce a strain gradient to oppose strains induced by habitual loading.

  12. Indices of Psychological Strain During Hypoxis Bedrest

    Science.gov (United States)

    Stavrou, Nektarios A.; McDonnell, Adam C.; Eiken, Ola; Mekjavic, Igor B.

    2013-02-01

    Much attention has been devoted to the physiological changes that occur during bed rest. However, there has been a lack of focus on the psychological aspects per se. We investigated indices of psychological strain during three 10-d interventions, designed to assess the combined effects of inactivity/unloading and normobaric hypoxia on several physiological systems. Eleven male participants underwent three 10-d campaigns in a randomized manner: 1) normobaric hypoxic ambulatory confinement (HAMB), 2) normobaric hypoxic bed rest (HBR) and 3) normoxic bed rest (NBR). The most negative psychological profile appeared on BR10 of HBR and HAmb conditions (hypoxic conditions). Concomitantly a decrease in positive emotions was observed from BR-2 to BR10. Bed rest and exposure to hypoxic environments seems to exert a negative effect on person’s psychological mood.

  13. Associations between Mycobacterium tuberculosis Strains and Phenotypes

    Science.gov (United States)

    Brown, Timothy; Nikolayevskyy, Vladyslav; Velji, Preya

    2010-01-01

    To inform development of tuberculosis (TB) control strategies, we characterized a total of 2,261 Mycobacterium tuberculosis complex isolates by using multiple phenotypic and molecular markers, including polymorphisms in repetitive sequences (spoligotyping and variable-number tandem repeats [VNTRs]) and large sequence and single-nucleotide polymorphisms. The Beijing family was strongly associated with multidrug resistance (p = 0.0001), and VNTR allelic variants showed strong associations with spoligotyping families: >5 copies at exact tandem repeat (ETR) A, >2 at mycobacterial interspersed repetitive unit 24, and >3 at ETR-B associated with the East African–Indian and M. bovis strains. All M. tuberculosis isolates were differentiated into 4 major lineages, and a maximum parsimony tree was constructed suggesting a more complex phylogeny for M. africanum. These findings can be used as a model of pathogen global diversity. PMID:20113558

  14. Strain gradient effects on cyclic plasticity

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Legarth, Brian Nyvang

    2010-01-01

    Size effects on the cyclic shear response are studied numerically using a recent higher order strain gradient visco-plasticity theory accounting for both dissipative and energetic gradient hardening. Numerical investigations of the response under cyclic pure shear and shear of a finite slab between...... rigid platens have been carried out, using the finite element method. It is shown for elastic–perfectly plastic solids how dissipative gradient effects lead to increased yield strength, whereas energetic gradient contributions lead to increased hardening as well as a Bauschinger effect. For linearly...... hardening materials it is quantified how dissipative and energetic gradient effects promote hardening above that of conventional predictions. Usually, increased hardening is attributed to energetic gradient effects, but here it is found that also dissipative gradient effects lead to additional hardening...

  15. High strain rate deformation of layered nanocomposites.

    Science.gov (United States)

    Lee, Jae-Hwang; Veysset, David; Singer, Jonathan P; Retsch, Markus; Saini, Gagan; Pezeril, Thomas; Nelson, Keith A; Thomas, Edwin L

    2012-01-01

    Insight into the mechanical behaviour of nanomaterials under the extreme condition of very high deformation rates and to very large strains is needed to provide improved understanding for the development of new protective materials. Applications include protection against bullets for body armour, micrometeorites for satellites, and high-speed particle impact for jet engine turbine blades. Here we use a microscopic ballistic test to report the responses of periodic glassy-rubbery layered block-copolymer nanostructures to impact from hypervelocity micron-sized silica spheres. Entire deformation fields are experimentally visualized at an exceptionally high resolution (below 10 nm) and we discover how the microstructure dissipates the impact energy via layer kinking, layer compression, extreme chain conformational flattening, domain fragmentation and segmental mixing to form a liquid phase. Orientation-dependent experiments show that the dissipation can be enhanced by 30% by proper orientation of the layers.

  16. High strain rate deformation of layered nanocomposites

    Science.gov (United States)

    Lee, Jae-Hwang; Veysset, David; Singer, Jonathan P.; Retsch, Markus; Saini, Gagan; Pezeril, Thomas; Nelson, Keith A.; Thomas, Edwin L.

    2012-11-01

    Insight into the mechanical behaviour of nanomaterials under the extreme condition of very high deformation rates and to very large strains is needed to provide improved understanding for the development of new protective materials. Applications include protection against bullets for body armour, micrometeorites for satellites, and high-speed particle impact for jet engine turbine blades. Here we use a microscopic ballistic test to report the responses of periodic glassy-rubbery layered block-copolymer nanostructures to impact from hypervelocity micron-sized silica spheres. Entire deformation fields are experimentally visualized at an exceptionally high resolution (below 10 nm) and we discover how the microstructure dissipates the impact energy via layer kinking, layer compression, extreme chain conformational flattening, domain fragmentation and segmental mixing to form a liquid phase. Orientation-dependent experiments show that the dissipation can be enhanced by 30% by proper orientation of the layers.

  17. Easy storage strategies for Sporothrix spp. strains.

    Science.gov (United States)

    Brilhante, Raimunda Sâmia Nogueira; Silva, Natalya Fechine; Lima, Rita Amanda Chaves de; Caetano, Érica Pacheco; Alencar, Lucas Pereira de; Castelo-Branco, Débora de Souza Collares Maia; Moreira, José Luciano Bezerra; Bandeira, Silviane Praciano; Camargo, Zoilo Pires de; Rodrigues, Anderson Messias; Bandeira, Tereza de Jesus Pinheiro Gomes; Monteiro, André Jalles; Cordeiro, Rossana de Aguiar; Sidrim, José Júlio Costa; Rocha, Marcos Fábio Gadelha

    2015-04-01

    The present study evaluated the maintenance of Sporothrix spp. (6 Sporothrix brasiliensis; 6 S. schenckii; 5 S. mexicana, and 3 S. globosa) in saline at 4°C, and in 10% glycerol plus either 10% lactose or 10% sucrose, at -20°C and -80°C. Viability was assessed after 3, 6, and 9 months of storage, through the recovery of strains on potato dextrose agar and analysis of macro- and micromorphological features. Conidium quantification was performed before and after storage, at 3, 6 and 9 months. 100% viability was observed, regardless of storage conditions or time period. Storage at 4°C and at -20°C did not alter the number of conidia, but lower conidium counts were observed at -80°C. This study shows that the combination of glycerol with lactose or sucrose is effective to maintain Sporothrix spp. at freezing temperatures.

  18. Engineering clostridium strain to accept unmethylated DNA.

    Directory of Open Access Journals (Sweden)

    Hongjun Dong

    Full Text Available It is difficult to genetically manipulate the medically and biotechnologically important genus Clostridium due to the existence of the restriction and modification (RM systems. We identified and engineered the RM system of a model clostridial species, C. acetobutylicum, with the aim to allow the host to accept the unmethylated DNA efficiently. A gene CAC1502 putatively encoding the type II restriction endonuclease Cac824I was identified from the genome of C. acetobutylicum DSM1731, and disrupted using the ClosTron system based on group II intron insertion. The resulting strain SMB009 lost the type II restriction endonuclease activity, and can be transformed with unmethylated DNA as efficiently as with methylated DNA. The strategy reported here makes it easy to genetically modify the clostridial species using unmethylated DNA, which will help to advance the understanding of the clostridial physiology from the molecular level.

  19. Social relations: network, support and relational strain

    DEFF Research Database (Denmark)

    Due, P; Holstein, B; Lund, Rikke

    1999-01-01

    We introduce a conceptual framework with social relations as the main concept and the structure and the function of social relations as subconcepts. The structure of social relations covers aspects of formal relations and social network. The function of social relations covers social support......,011. The postal questionnaires were answered by a random sample in each of the age groups. The results show marked age and gender differences in both the structure and the function of social relations. The social network, measured as weekly contacts, weakens with age and so does instrumental support. Emotional...... support is unrelated to this decline in contact frequency and appears to be at the same level for younger and older individuals. Relational strain, measured as conflicts, declines with age for all kinds of social relations. The weakening of the social network with age does not seem to affect the level...

  20. Strain driven fast osseointegration of implants

    Directory of Open Access Journals (Sweden)

    Wiesmann Hans-Peter

    2005-09-01

    Full Text Available Abstract Background Although the bone's capability of dental implant osseointegration has clinically been utilised as early as in the Gallo-Roman population, the specific mechanisms for the emergence and maintenance of peri-implant bone under functional load have not been identified. Here we show that under immediate loading of specially designed dental implants with masticatory loads, osseointegration is rapidly achieved. Methods We examined the bone reaction around non- and immediately loaded dental implants inserted in the mandible of mature minipigs during the presently assumed time for osseointegration. We used threaded conical titanium implants containing a titanium2+ oxide surface, allowing direct bone contact after insertion. The external geometry was designed according to finite element analysis: the calculation showed that physiological amplitudes of strain (500–3,000 ustrain generated through mastication were homogenously distributed in peri-implant bone. The strain-energy density (SED rate under assessment of a 1 Hz loading cycle was 150 Jm-3 s-1, peak dislocations were lower then nm. Results Bone was in direct contact to the implant surface (bone/implant contact rate 90% from day one of implant insertion, as quantified by undecalcified histological sections. This effect was substantiated by ultrastructural analysis of intimate osteoblast attachment and mature collagen mineralisation at the titanium surface. We detected no loss in the intimate bone/implant bond during the experimental period of either control or experimental animals, indicating that immediate load had no adverse effect on bone structure in peri-implant bone. Conclusion In terms of clinical relevance, the load related bone reaction at the implant interface may in combination with substrate effects be responsible for an immediate osseointegration state.

  1. Strain energy of a disk-shaped GP zone

    International Nuclear Information System (INIS)

    Wert, J.A.

    1976-01-01

    A simplified form of Khachaturyan's solution to the problem of determining the strain energy of an arbitrarily-shaped coherent inclusion is found for the case of a disk-shaped inclusion. Specific strain energies are calculated as a function of the orientation of such an inclusion in lattices possessing various elastic properties. Some numerical results are presented. The salient features of the specific strain energy surface are found to depend only on the elastic properties of the lattice. From this, a relationship between an elastic anisotropy parameter, A, and the minimum strain energy orientation of a disk-shaped inclusion is observed. The strain energies of GP zones in Al--Cu and Cu--Be age hardening alloys are calculated. The minimum strain energy orientations of GP zones in these alloys agree with experimentally observed orientations

  2. Rhodococcus jostii: a home for Rhodococcus strain RHA1.

    Science.gov (United States)

    Jones, Amanda L; Davies, Julian; Fukuda, Masao; Brown, Roselyn; Lim, Jesmine; Goodfellow, Michael

    2013-09-01

    The taxonomic position of Rhodococcus strain RHA1, an effective degrader of polychlorinated biphenyls with a large linear chromosome, was established using a polyphasic approach. The morphological and chemotaxonomic properties of the strain were typical of members of the genus Rhodococcus. The strain shared a high level of 16S rRNA sequence similarity (99.9 %) with the type strain of Rhodococcus jostii, a member of the Rhodococcus erythropolis subclade. The two strains shared a DNA:DNA relatedness value well above the cut-off point recommended for the circumscription of genomic species and had a broad range of phenotypic properties in common. The combination of genomic and phenotypic data show strain RHA1 to be a bona fide member of the species Rhodococcus jostii.

  3. Streptococcus mitis Strains Causing Severe Clinical Disease in Cancer Patients

    Science.gov (United States)

    Sahasrabhojane, Pranoti; Saldana, Miguel; Yao, Hui; Su, Xiaoping; Horstmann, Nicola; Thompson, Erika; Flores, Anthony R.

    2014-01-01

    The genetically diverse viridans group streptococci (VGS) are increasingly recognized as the cause of a variety of human diseases. We used a recently developed multilocus sequence analysis scheme to define the species of 118 unique VGS strains causing bacteremia in patients with cancer; Streptococcus mitis (68 patients) and S. oralis (22 patients) were the most frequently identified strains. Compared with patients infected with non–S. mitis strains, patients infected with S. mitis strains were more likely to have moderate or severe clinical disease (e.g., VGS shock syndrome). Combined with the sequence data, whole-genome analyses showed that S. mitis strains may more precisely be considered as >2 species. Furthermore, we found that multiple S. mitis strains induced disease in neutropenic mice in a dose-dependent fashion. Our data define the prominent clinical effect of the group of organisms currently classified as S. mitis and lay the groundwork for increased understanding of this understudied pathogen. PMID:24750901

  4. Biaxial Compressive Strain Engineering in Graphene/Boron Nitride Heterostructures

    Science.gov (United States)

    Pan, Wei; Xiao, Jianliang; Zhu, Junwei; Yu, Chenxi; Zhang, Gang; Ni, Zhenhua; Watanabe, K.; Taniguchi, T.; Shi, Yi; Wang, Xinran

    2012-11-01

    Strain engineered graphene has been predicted to show many interesting physics and device applications. Here we study biaxial compressive strain in graphene/hexagonal boron nitride heterostructures after thermal cycling to high temperatures likely due to their thermal expansion coefficient mismatch. The appearance of sub-micron self-supporting bubbles indicates that the strain is spatially inhomogeneous. Finite element modeling suggests that the strain is concentrated on the edges with regular nano-scale wrinkles, which could be a playground for strain engineering in graphene. Raman spectroscopy and mapping is employed to quantitatively probe the magnitude and distribution of strain. From the temperature-dependent shifts of Raman G and 2D peaks, we estimate the TEC of graphene from room temperature to above 1000K for the first time.

  5. Characterization Of Biaxial Strain Of Poly(L-Lactide) Tubes

    DEFF Research Database (Denmark)

    Løvdal, Alexandra Liv Vest; Andreasen, Jens Wenzel; Mikkelsen, Lars Pilgaard

    2016-01-01

    Poly(L-lactide) (PLLA) in its L-form has promising mechanical properties. Being a semi-crystalline polymer, it can be subjected to strain-induced crystallization at temperatures above Tg and can thereby become oriented. Following a simultaneous (SIM) biaxial strain process or a sequential (SEQ......) biaxial strain process, the mechanical properties of biaxial strained tubes can be further improved. This study investigated these properties in relation to their morphology and crystal orientation. Both processes yield the same mechanical strength and modulus, yet exhibit different crystal orientation....... Through further WAXS analysis it was found that the SEQ biaxial strain yields larger interplanar spacing and distorted crystals and looser packing of chains. However, this does not influence the mechanical properties negatively. A loss of orientation in SEQ biaxial strained samples at high degrees...

  6. Comparative genomic analyses of Mycoplasma hyopneumoniae pathogenic 168 strain and its high-passaged attenuated strain

    Science.gov (United States)

    2013-01-01

    Background Mycoplasma hyopneumoniae is the causative agent of porcine enzootic pneumonia (EP), a mild, chronic pneumonia of swine. Despite presenting with low direct mortality, EP is responsible for major economic losses in the pig industry. To identify the virulence-associated determinants of M. hyopneumoniae, we determined the whole genome sequence of M. hyopneumoniae strain 168 and its attenuated high-passage strain 168-L and carried out comparative genomic analyses. Results We performed the first comprehensive analysis of M. hyopneumoniae strain 168 and its attenuated strain and made a preliminary survey of coding sequences (CDSs) that may be related to virulence. The 168-L genome has a highly similar gene content and order to that of 168, but is 4,483 bp smaller because there are 60 insertions and 43 deletions in 168-L. Besides these indels, 227 single nucleotide variations (SNVs) were identified. We further investigated the variants that affected CDSs, and compared them to reported virulence determinants. Notably, almost all of the reported virulence determinants are included in these variants affected CDSs. In addition to variations previously described in mycoplasma adhesins (P97, P102, P146, P159, P216, and LppT), cell envelope proteins (P95), cell surface antigens (P36), secreted proteins and chaperone protein (DnaK), mutations in genes related to metabolism and growth may also contribute to the attenuated virulence in 168-L. Furthermore, many mutations were located in the previously described repeat motif, which may be of primary importance for virulence. Conclusions We studied the virulence attenuation mechanism of M. hyopneumoniae by comparative genomic analysis of virulent strain 168 and its attenuated high-passage strain 168-L. Our findings provide a preliminary survey of CDSs that may be related to virulence. While these include reported virulence-related genes, other novel virulence determinants were also detected. This new information will form

  7. Evolution of bulk strain solitons in cylindrical inhomogeneous shells

    Energy Technology Data Exchange (ETDEWEB)

    Shvartz, A., E-mail: andrew.shvartz@mail.ioffe.ru; Samsonov, A.; Dreiden, G.; Semenova, I. [Ioffe Institute, 26 Politekhnicheskaya, St Petersburg 194021 (Russian Federation)

    2015-10-28

    Bulk strain solitary waves in nonlinearly elastic thin-walled cylindrical shells with variable geometrical and physical parameters are studied, and equation for the longitudinal strain component with the variable coefficients is derived. A conservative finite difference scheme is proposed, and the results of numerical simulation of the strain soliton evolution in a shell with the abrupt variations of cross section and physical properties of the material are presented.

  8. Bridge measuring circuits in the strain gauge sensor configuration

    OpenAIRE

    Manojlović, Jelena; Janković, Predrag

    2013-01-01

    In engineering sciences student education, electrical measurement of mechanical quantities can often be found. It is also widely used in engineering applications force measurements, particularly in machine tools. Load sensors, which are frequently used in mechanical engineering research, use strain gauges, bonded to a metal beam, to measure bidirectional force. The applied force induces extremely small changes in the resistance of strain gauges. In order to measure strain with a bonded resist...

  9. Optical fiber strain sensor with improved linearity range

    Science.gov (United States)

    Egalon, Claudio Oliveira (Inventor); Rogowski, Robert S. (Inventor)

    1995-01-01

    A strain sensor is constructed from a two mode optical fiber. When the optical fiber is surface mounted in a straight line and the object to which the optical fiber is mounted is subjected to strain within a predetermined range, the light intensity of any point at the output of the optical fiber will have a linear relationship to strain, provided the intermodal phase difference is less than 0.17 radians.

  10. "Behaviour changes in Permethrin-resistant strain of Anopheles Stephensi "

    Directory of Open Access Journals (Sweden)

    Vatandoost H

    2000-09-01

    Full Text Available Behaviour studies indicated that the permethrin resistant strin of An. Stephensi was 3-fold resistant to knock-down compared with the susceptible strain. The resistant strain was however 3-fold less irritable to permethrin and less responsive than the susceptible strain to the movement of an aspirator. If reduced irritability and reduced responsiveness to catch are consequences of the changes in the nervous system, then such a form of resistance may be disadvantageous to mosquitoes in natural populations.

  11. Health-promoting properties exhibited by Lactobacillus helveticus strains.

    Science.gov (United States)

    Skrzypczak, Katarzyna; Gustaw, Waldemar; Waśko, Adam

    2015-01-01

    Many strains belonging to lactobacilli exert a variety of beneficial health effects in humans and some of the bacteria are regarded as probiotic microorganisms. Adherence and capabilities of colonization by Lactobacillus strains of the intestinal tract is a prerequisite for probiotic strains to exhibit desired functional properties. The analysis conducted here aimed at screening strains of Lactobacillus helveticus possessing a health-promoting potential. The molecular analysis performed, revealed the presence of a slpA gene encoding the surface S-layer protein SlpA (contributing to the immunostimulatory activity of L. helveticus M 92 probiotic strain) in all B734, DSM, T80, and T105 strains. The product of gene amplification was also identified in a Bifidobacterium animalis ssp. lactis BB12 probiotic strain. SDS-PAGE of a surface protein extract demonstrated the presence of a protein with a mass of about 50 kDa in all strains, which refers to the mass of the S-layer proteins. These results are confirmed by observations carried with transmission electron microscopy, where a clearly visible S-layer was registered in all the strains analyzed. The in vitro study results obtained indicate that the strongest adhesion capacity to epithelial cells (HT-29) was demonstrated by L. helveticus B734, while coaggregation with pathogens was highly diverse among the tested strains. The percentage degree of coaggregation was increasing with the incubation time. After 5 h of incubation, the strongest ability to coaggregate with Escherichia coli was expressed by T104. The T80 strain demonstrated a significant ability to co-aggregate with Staphylococcus aureus, while DSM with Bacillus subtilis. For B734, the highest values of co-aggregation coefficient was noted in samples with Salmonella. The capability of autoaggregation, antibiotic susceptibility, resistance to increasing salt concentrations, and strain survival in simulated small intestinal juice were also analyzed.

  12. AERODYNAMIC BEHAVIOR AIRCRAFT CAUSED BY RESIDUAL STRAIN WINGS

    Directory of Open Access Journals (Sweden)

    Sergiy Ishchenko

    2011-03-01

    Full Text Available Abstract. The influence of residual strain on the airframe aerodynamic characteristics of aircraft wasconsidered. The possibility of estimation of changes in deformation of airframe using data of leveling wasshown. The method of estimating the change of aerodynamic characteristics caused by the influence ofresidual strain airframe was proposed. Technique can be used in the operation and overhaul of aircraft withlarge operating time.Keywords: aerodynamic characteristics, residual strain construction asymmetric moments, thedistribution of circulation, the scheme of leveling, trigonometric series.

  13. Genotypic comparison of Pantoea agglomerans plant and clinical strains

    Directory of Open Access Journals (Sweden)

    Frey Jürg E

    2009-09-01

    Full Text Available Abstract Background Pantoea agglomerans strains are among the most promising biocontrol agents for a variety of bacterial and fungal plant diseases, particularly fire blight of apple and pear. However, commercial registration of P. agglomerans biocontrol products is hampered because this species is currently listed as a biosafety level 2 (BL2 organism due to clinical reports as an opportunistic human pathogen. This study compares plant-origin and clinical strains in a search for discriminating genotypic/phenotypic markers using multi-locus phylogenetic analysis and fluorescent amplified fragment length polymorphisms (fAFLP fingerprinting. Results Majority of the clinical isolates from culture collections were found to be improperly designated as P. agglomerans after sequence analysis. The frequent taxonomic rearrangements underwent by the Enterobacter agglomerans/Erwinia herbicola complex may be a major problem in assessing clinical associations within P. agglomerans. In the P. agglomerans sensu stricto (in the stricter sense group, there was no discrete clustering of clinical/biocontrol strains and no marker was identified that was uniquely associated to clinical strains. A putative biocontrol-specific fAFLP marker was identified only in biocontrol strains. The partial ORF located in this band corresponded to an ABC transporter that was found in all P. agglomerans strains. Conclusion Taxonomic mischaracterization was identified as a major problem with P. agglomerans, and current techniques removed a majority of clinical strains from this species. Although clear discrimination between P. agglomerans plant and clinical strains was not obtained with phylogenetic analysis, a single marker characteristic of biocontrol strains was identified which may be of use in strain biosafety determinations. In addition, the lack of Koch's postulate fulfilment, rare retention of clinical strains for subsequent confirmation, and the polymicrobial nature of P

  14. Genotypic comparison of Pantoea agglomerans plant and clinical strains.

    Science.gov (United States)

    Rezzonico, Fabio; Smits, Theo H M; Montesinos, Emilio; Frey, Jürg E; Duffy, Brion

    2009-09-22

    Pantoea agglomerans strains are among the most promising biocontrol agents for a variety of bacterial and fungal plant diseases, particularly fire blight of apple and pear. However, commercial registration of P. agglomerans biocontrol products is hampered because this species is currently listed as a biosafety level 2 (BL2) organism due to clinical reports as an opportunistic human pathogen. This study compares plant-origin and clinical strains in a search for discriminating genotypic/phenotypic markers using multi-locus phylogenetic analysis and fluorescent amplified fragment length polymorphisms (fAFLP) fingerprinting. Majority of the clinical isolates from culture collections were found to be improperly designated as P. agglomerans after sequence analysis. The frequent taxonomic rearrangements underwent by the Enterobacter agglomerans/Erwinia herbicola complex may be a major problem in assessing clinical associations within P. agglomerans. In the P. agglomerans sensu stricto (in the stricter sense) group, there was no discrete clustering of clinical/biocontrol strains and no marker was identified that was uniquely associated to clinical strains. A putative biocontrol-specific fAFLP marker was identified only in biocontrol strains. The partial ORF located in this band corresponded to an ABC transporter that was found in all P. agglomerans strains. Taxonomic mischaracterization was identified as a major problem with P. agglomerans, and current techniques removed a majority of clinical strains from this species. Although clear discrimination between P. agglomerans plant and clinical strains was not obtained with phylogenetic analysis, a single marker characteristic of biocontrol strains was identified which may be of use in strain biosafety determinations. In addition, the lack of Koch's postulate fulfilment, rare retention of clinical strains for subsequent confirmation, and the polymicrobial nature of P. agglomerans clinical reports should be considered in

  15. Low-temperature strain gauges based on silicon whiskers

    Directory of Open Access Journals (Sweden)

    Druzhinin A. A.

    2008-08-01

    Full Text Available To create low-temperature strain gauges based on p-type silicon whiskers tensoresistive characteristics of these crystals in 4,2—300 K temperature range were studied. On the basis of p-type Si whiskers with different resistivity the strain gauges for different materials operating at cryogenic temperatures with extremely high gauge factor at 4,2 K were developed, as well as strain gauges operating at liquid helium temperatures in high magnetic fields.

  16. Genome Sequence of Human Rhinovirus A22, Strain Lancaster/2015.

    Science.gov (United States)

    Atkinson, Kate V; Bishop, Lisa A; Rhodes, Glenn; Salez, Nicolas; McEwan, Neil R; Hegarty, Matthew J; Robey, Julie; Harding, Nicola; Wetherell, Simon; Lauder, Robert M; Pickup, Roger W; Wilkinson, Mark; Gatherer, Derek

    2017-03-23

    The genome of human rhinovirus A22 (HRV-A22) was assembled by deep sequencing RNA samples from nasopharyngeal swabs. The assembled genome is 8.7% divergent from the HRV-A22 reference strain over its full length, and it is only the second full-length genome sequence for HRV-A22. The new strain is designated strain HRV-A22/Lancaster/2015. Copyright © 2017 Atkinson et al.

  17. Measuring autogenous strain of concrete with corrugated moulds

    DEFF Research Database (Denmark)

    Tian, Qian; Jensen, Ole Mejlhede

    2008-01-01

    A reliable technique to quantify autogenous strain is a prerequisite to numerical modeling in stress calculations for high performance concrete. The introducing of a special kind of corrugated tube mould helps to transforming volume strain measurement into liner strain measurement in horizontal...... direction for fluid concrete, which not only realizes the continuous monitoring of the autogenous shrinkage since casting, but also effectively eliminates the disturbance resulting from gravity, temperature variation and mould restraint on measuring results. Based on this measuring technique, this paper...

  18. Tensile response of elastoplastic lattices at finite strain

    Science.gov (United States)

    Tankasala, H. C.; Deshpande, V. S.; Fleck, N. A.

    2017-12-01

    The finite strain, uniaxial tensile response of two-dimensional (2D) elastoplastic lattices is investigated using finite element simulations and analytical models, taking into full account the macroscopic stiffening due to cell wall alignment. Four morphologies of 2D lattice are considered: triangular, Kagome, hexagonal, and diamond. The cell walls are treated as Timoshenko beams made from an elastoplastic solid with a strain hardening characteristic that resembles Ramberg-Osgood at low strains and exponential hardening at large strains. This description captures the response of metallic lattices at small strain and selected polymeric lattices at large strain. The use of beam theory is validated by additional continuum element simulations. The dependence of macroscopic ductility and tensile strength of each lattice is determined as a function of relative density, cell wall rupture strain and cell wall strain-hardening. Two failure criteria are invoked: (i) maximum value of local tensile strain anywhere in the lattice attains a pre-defined failure strain, or (ii) maximum value of average tensile strain across any section of the lattice attains the failure strain. The sensitivity of macroscopic ductility and ultimate tensile strength to geometric imperfection is explored by considering: (i) random topologies in which the joints are randomly perturbed in position, and (ii) a finite crack formed by an array of broken cell walls. The notion of a transition flaw size for the lattices is validated by means of a notch sensitivity analysis, and the significance of crack-tip blunting by cell wall alignment is highlighted for the hexagonal honeycomb.

  19. Strain-tuning of edge magnetism in zigzag graphene nanoribbons.

    Science.gov (United States)

    Yang, Guang; Li, Baoyue; Zhang, Wei; Ye, Miao; Ma, Tianxing

    2017-09-13

    Using the determinant quantum Monte-Carlo method, we elucidate the strain tuning of edge magnetism in zigzag graphene nanoribbons. Our intensive numerical results show that a relatively weak Coulomb interaction may induce a ferromagnetic-like behaviour with a proper strain, and the edge magnetism can be enhanced greatly as the strain along the zigzag edge increases, which provides another way to control graphene magnetism even at room temperature.

  20. Context and strain-dependent behavioral response to stress

    OpenAIRE

    Baum Amber E; Ahmadiyeh Nasim; Andrus Brian M; Dennis Kristen; Nosek Katarzyna; Woods Leah; Redei Eva E

    2008-01-01

    Abstract Background This study posed the question whether strain differences in stress-reactivity lead to differential behavioral responses in two different tests of anxiety. Strain differences in anxiety-measures are known, but strain differences in the behavioral responses to acute prior stress are not well characterized. Methods We studied male Fisher 344 (F344) and Wistar Kyoto (WKY) rats basally and immediately after one hour restraint stress. To distinguish between the effects of novelt...

  1. EDITORIAL: Excelling under strain: band engineering in nanomaterials Excelling under strain: band engineering in nanomaterials

    Science.gov (United States)

    Demming, Anna

    2013-08-01

    A little stress or strain has been known to improve the performance of athletes, actors and of course nanomaterials alike. In fact strain in silicon is now a major engineering tool for improving the performance of devices, and is ubiquitously used in device design and fabrication. Strain engineering alters a material's band structure, a model of electron behaviour that describes how as atoms come together in a solid, their discrete electron orbitals overlap to ultimately give rise to bands of allowed energy levels. In a strained crystal lattice of silicon or silicon germanium the distance between atoms in the lattice is greater than usual and the bands of allowed energy levels change. This July marks 100 years since Bohr submitted his paper 'On the constitution of atoms and molecules' [1] where he describes the structure of the atom in terms of discrete allowed energy levels. The paper was a seminal contribution to the development of quantum mechanics and laid the initial theoretical precepts for band gap engineering in devices. In this issue Nrauda and a collaboration of researchers in Europe and Australia study the growth of defect-free SiGe islands on pre-patterned silicon [2]. They analyse the strain in the islands and determine at what point lattice dislocations set in with a view to informing implementation of strain engineering in devices. The effects of strain on band structure in silicon and germanium were already studied and reported in the 1950s [3, 4]. Since then the increasing focus on nanoscale materials and the hunger for control of electronic properties has prompted further study of strain effects. The increased surface area to volume ratio in nanostructures changes the strain behaviour with respect to bulk materials, and this can also be exploited for handling and fine tuning strain to manipulate material properties. It is perhaps no surprise that graphene, one of the most high-profile materials in current nanotechnology research, has attracted

  2. Isolation, identification and characterization of regional indigenous Saccharomyces cerevisiae strains.

    Science.gov (United States)

    Šuranská, Hana; Vránová, Dana; Omelková, Jiřina

    2016-01-01

    In the present work we isolated and identified various indigenous Saccharomyces cerevisiae strains and screened them for the selected oenological properties. These S. cerevisiae strains were isolated from berries and spontaneously fermented musts. The grape berries (Sauvignon blanc and Pinot noir) were grown under the integrated and organic mode of farming in the South Moravia (Czech Republic) wine region. Modern genotyping techniques such as PCR-fingerprinting and interdelta PCR typing were employed to differentiate among indigenous S. cerevisiae strains. This combination of the methods provides a rapid and relatively simple approach for identification of yeast of S. cerevisiae at strain level. In total, 120 isolates were identified and grouped by molecular approaches and 45 of the representative strains were tested for selected important oenological properties including ethanol, sulfur dioxide and osmotic stress tolerance, intensity of flocculation and desirable enzymatic activities. Their ability to produce and utilize acetic/malic acid was examined as well; in addition, H2S production as an undesirable property was screened. The oenological characteristics of indigenous isolates were compared to a commercially available S. cerevisiae BS6 strain, which is commonly used as the starter culture. Finally, some indigenous strains coming from organically treated grape berries were chosen for their promising oenological properties and these strains will be used as the starter culture, because application of a selected indigenous S. cerevisiae strain can enhance the regional character of the wines. Copyright © 2015 Sociedade Brasileira de Microbiologia. Published by Elsevier Editora Ltda. All rights reserved.

  3. Identification of Diarrheagenic Escherichia coli Strains from Avian Organic Fertilizers

    Directory of Open Access Journals (Sweden)

    Juan Puño-Sarmiento

    2014-08-01

    Full Text Available The Brazilian poultry industry generates large amounts of organic waste, such as chicken litter, which is often used in agriculture. Among the bacteria present in organic fertilizer are members of the Enterobacteriaceae family. The objective of this study was to detect the presence of diarrheagenic Escherichia coli (DEC strains in avian organic fertilizer, and assess the potential damage they can cause in humans due to antimicrobial resistance. The presence of DEC pathotypes and phylogenetic groups were detected by multiplex-PCR. Phenotypic assays, such as tests for adhesion, cytotoxicity activity, biofilm formation and especially antimicrobial susceptibility, were performed. Fifteen DEC strains from 64 E. coli were isolated. Among these, four strains were classified as enteropathogenic (EPEC; 6.2%, three strains as Shiga toxin-producing (STEC; 4.7%, 10 strains as enteroaggregative (EAEC; 12.5%, but two of these harbored the eaeA gene too. The low number of isolated strains was most likely due to the composting process, which reduces the number of microorganisms. These strains were able to adhere to HEp-2 and HeLa cells and produce Shiga-toxins and biofilms; in addition, some of the strains showed antimicrobial resistance, which indicates a risk of the transfer of resistance genes to human E. coli. These results showed that DEC strains isolated from avian organic fertilizers can cause human infections.

  4. Influence of pore pressure change on coseismic volumetric strain

    Science.gov (United States)

    Wang, C. Y.; Barbour, A. J.

    2017-12-01

    Coseismic strain is fundamentally important for understanding crustal response to transient changes of stress. The elastic dislocation model has been widely applied to interpreting observed shear deformation caused by earthquakes. The application of this model to interpreting volumetric strain, however, has met with difficulty, especially in the far field of earthquakes. Predicted volumetric strain with dislocation model often differs substantially, and sometimes of opposite signs, from observed coseismic volumetric strains. The disagreement suggests that some processes unaccounted for by the dislocation model may occur during earthquakes. Several hypotheses have been suggested, but none have been tested quantitatively. In this study we first assemble published data to highlight the significant difference between the measured and predicted coseismic volumetric strains from the dislocation theory. We then show that the disagreement may largely be explained by coseismic change of pore pressure in the shallow crust. We provide a quantitative test of the model with the assembled data, which allows us to conclude that coseismic change of pore pressure may be an important mechanism for coseismic crustal strain and, in the far field, may even be the controlling mechanism. Thus in the interpretation of observed coseismic crustal strain, one needs to account not only for the elastic strain due to fault rupture but also for the strain due to coseismic change of pore pressure.

  5. Mead production: selection and characterization assays of Saccharomyces cerevisiae strains.

    Science.gov (United States)

    Pereira, Ana Paula; Dias, Teresa; Andrade, João; Ramalhosa, Elsa; Estevinho, Letícia M

    2009-08-01

    Mead is a traditional drink, which results from the alcoholic fermentation of diluted honey carried out by yeasts. However, when it is produced in a homemade way, mead producers find several problems, namely, the lack of uniformity in the final product, delayed and arrested fermentations, and the production of "off-flavours" by the yeasts. These problems are usually associated with the inability of yeast strains to respond and adapt to unfavourable and stressful growth conditions. The main objectives of this work were to evaluate the capacity of Saccharomyces cerevisiae strains, isolated from honey of the Trás-os-Montes (Northeast Portugal), to produce mead. Five strains from honey, as well as one laboratory strain and one commercial wine strain, were evaluated in terms of their fermentation performance under ethanol, sulphur dioxide and osmotic stress. All the strains showed similar behaviour in these conditions. Two yeasts strains isolated from honey and the commercial wine strain were further tested for mead production, using two different honey (a dark and a light honey), enriched with two supplements (one commercial and one developed by the research team), as fermentation media. The results obtained in this work show that S. cerevisiae strains isolated from honey, are appropriate for mead production. However it is of extreme importance to take into account the characteristics of the honey, and supplements used in the fermentation medium formulation, in order to achieve the best results in mead production.

  6. Size-effects in plane strain sheet-necking

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Redanz, Pia

    2004-01-01

    A finite strain generalization of the strain gradient plasticity theory by Fleck and Hutchinson (J. Mech. Phys. Solids 49 (2001a) 2245) is proposed and used to study size effects in plane strain necking of thin sheets using the finite element method. Both sheets with rigid grips at the ends...... and specimens with shear free ends are analyzed. The strain gradient plasticity theory predicts delayed onset of localization when compared to conventional theory, and it depresses deformation localization in the neck. The sensitivity to imperfections is analyzed as well as differently hardening materials. (C...

  7. Size-effects in plane strain sheet-necking

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Redanz, Pia

    2003-01-01

    A finite strain generalization of the strain gradient plasticity theory by Fleck and Hutchinson (2001) is proposed and used to study size effects in plane strain necking of thin sheets using the finite element method. Both sheets with rigid grips at the ends and specimens with shear free ends...... are analyzed. The strain gradient plasticity theory predicts delayed onset of localization when compared to conventional theory, and it depresses deformation localization in the neck. The sensitivity to imperfections is analyzed as well as differently hardening materials....

  8. Production of {alpha}-glucosidases by Bacillus sp. strains

    Energy Technology Data Exchange (ETDEWEB)

    Castro, G.R. [Univ. Nacional de Tucuman, Facultad de Bioquimica, Quimica y Farmacia, Catedra de Microbiologia Superior, PROIMI-MIRCEN, Tucuman (Argentina); Baigori, M.D. [Univ. Nacional de Tucuman, Facultad de Bioquimica, Quimica y Farmacia, Catedra de Microbiologia Superior, PROIMI-MIRCEN, Tucuman (Argentina); Sineriz, F. [Univ. Nacional de Tucuman, Facultad de Bioquimica, Quimica y Farmacia, Catedra de Microbiologia Superior, PROIMI-MIRCEN, Tucuman (Argentina)

    1995-12-31

    {alpha}-Glucosidase was detected in four wild-type amylolytic production strains belonging to the Bacillus genus. The strains showed {alpha}-glucosidase activity in extracellular and membrane-bound fractions. Kinetic studies of the {alpha}-glucosidase synthesis in the batch cultures of four strains of the Bacillus genus showed two profiles: partially and totally growth-linked synthesis. The presence of different activities and production profiles of {alpha}-glucosidase in the strains at high or low glucose concentrations in the medium would indicate that {alpha}-glucosidase may have a role in the regulation of the metabolism of {alpha}-polysaccharides. (orig.)

  9. Complete Genome Sequence of Escherichia coli Strain WG5

    DEFF Research Database (Denmark)

    Imamovic, Lejla; Misiakou, Maria-Anna; van der Helm, Eric

    2018-01-01

    Escherichia coli strain WG5 is a widely used host for phage detection, including somatic coliphages employed as standard ISO method 10705-1 (2000). Here, we present the complete genome sequence of a commercial E. coli WG5 strain.......Escherichia coli strain WG5 is a widely used host for phage detection, including somatic coliphages employed as standard ISO method 10705-1 (2000). Here, we present the complete genome sequence of a commercial E. coli WG5 strain....

  10. Survival of Lactobacillus rhamnosus strains in the upper gastrointestinal tract.

    Science.gov (United States)

    Pitino, Iole; Randazzo, Cinzia Lucia; Mandalari, Giuseppina; Lo Curto, Alberto; Faulks, Richard Martin; Le Marc, Yvan; Bisignano, Carlo; Caggia, Cinzia; Wickham, Martin Sean John

    2010-12-01

    In the present study six probiotic Lactobacillus rhamnosus strains were investigated for their ability to survive in the human upper gastrointestinal tract through a dynamic gastric model of digestion. MRS broth was used as delivery vehicle and survival was investigated during in vitro gastric and gastric plus duodenal digestion. Results highlighted that all tested strains showed good survival rate during both gastric and duodenal digestion. In particular, three strains exhibited a great survival showing a recovery percentage in the range between 117 and 276%. In agreement with survival data, high lactic acid production was detected for all strains, confirming their metabolic activity during digestion. Copyright © 2010 Elsevier Ltd. All rights reserved.

  11. Design and Construction of Strain Gauge Interface Pressure ...

    African Journals Online (AJOL)

    Design and Construction of Strain Gauge Interface Pressure Transducer for Measurement of Static and Dynamic Interface Pressure Applied by Pressure Garments and its Relationship to Deep Vein Thrombosis.

  12. Strain ageing in welds of nuclear pressure vessels

    International Nuclear Information System (INIS)

    Otterberg, R.; Karlsson, C.

    1979-01-01

    Static and dynamic strain ageing have been investigated on submerged-arc welds and repair welds from plates of the pressure vessel steel A 533B. The results permit the determination of the worst strain ageing conditions existing in a nuclear pressure vessel. Static strain ageing was investigated by means of data from tension tests, hardness measurements and Charpy-V impact properties for prestrained and aged material for ageing temperatures from room temperature to 350 deg C and ageing times up to 1000h. Dynamic strain ageing was investigated by tensile tests up to 350 deg C at different strain rates. At the most static strain ageing was found to increase the impact transition temperature from -75 deg C in the as-received condition to -55 deg C after prestraining and ageing for the plate material, from -35 to -10 deg C for the submerged arc weld and from -90 to -40 deg C for the repair weld. Approximately 10 deg C of the deleterious effect is due to the effect of ageing for the two former materials whereas the corresponding figure for the repair weld amounts to 35 deg C. The dynamic strain ageing is strongest at very low strain rates at temperatures just below 300 deg C. The effect of strain ageing can be reduced by stress relief heat treatment or by other means decreasing the content of nitrogen in solution. (author)

  13. Isolation and identification of a novel radio-resistant strain

    International Nuclear Information System (INIS)

    Zhang Zhidong; Mao Jun; Wang Wei; Tang Qiyong; Shi Yuhu

    2008-01-01

    A novel radio-resistant strain named RL2 was studied polyphasically, which was isolated from the soils in the Gurban-Tunggut Desert, Xinjiang. The strain is Gam-positive, sphere-shaped and pink pigmented; The DNA (G+C) contents of RL2 is 71.62mo1%; The 16S rDNA genes of RL2 and D. radiodurans type strain DSM20539 shows a high level of similarity (97.2%). According to phenotypic characteristics and phylogenetic analysis, it can be suggested that the strain RL2 has been identified as Deinococcus. sp and it may be a novel species. (authors)

  14. Biodegradation of endosulfan by mixed bacteria culture strains of ...

    African Journals Online (AJOL)

    Biodegradation of endosulfan by mixed bacteria culture strains of Pseudomonas aeruginosa and Staphylococcus aureus. Nsidibeabasi Calvin Nwokem, Calvin Onyedika Nwokem, Casmir Emmanuel Gimba, Beatrice Nkiruka Iwuala ...

  15. Strain Induced Martensitic Transformation in Austempered Ductile Iron (ADI)

    Science.gov (United States)

    Li, X. H.; Saal, P.; Gan, W. M.; Landesberger, M.; Hoelzel, M.; Hofmann, M.

    2016-09-01

    The strain induced martensitic transformation in austempered ductile iron (ADI) has been investigated using high resolution neutron diffraction on samples compressed ex-situ to different plastic strains. In addition bulk texture measurements using neutron diffraction have been performed to calculate the orientation distribution of ferrite and austenite phases for different strain levels. Combing the detailed texture information with neutron diffraction pattern proved to be essential for quantitative phase analysis and extraction of martensite phase fractions. The martensite content induced by strain in ADI depends on austempering temperature and degree of deformation.

  16. Study on strain transfer of embedded fiber Bragg grating sensors

    Science.gov (United States)

    Wu, Rujun; Zheng, Bailin; Fu, Kunkun; He, Pengfei; Tan, Yuegang

    2014-08-01

    In this study, a theoretical model of embedded fiber Bragg grating sensors was developed to provide predictions of the strain transfer rate and average strain transfer rate without the assumption that the host material is subjected to uniform axial stress. Further, a finite element (FE) analysis was performed to validate the present model. It was shown that the theoretical results with the present model are in good agreement with those by FE analysis. Finally, the parametric analysis was used to quantitatively investigate the effect of the parameters of the adhesive layer and host material on the strain transfer rate and average strain transfer rate.

  17. Host strain specific sex pheromone variation in Spodoptera frugiperda

    Directory of Open Access Journals (Sweden)

    Svatos Ales

    2008-12-01

    Full Text Available Abstract Background The fall armyworm Spodoptera frugiperda (Lepidoptera; Noctuidae consists of two distinct strains with different host plant preferences for corn and rice. To assess whether pheromonal-mediated behavioral isolation accompanies the habitat isolation on different host plants, we compared the sex pheromone composition among females of the two strains. Pheromone glands were extracted with or without injection of pheromone biosynthesis activating neuropeptide (PBAN. To assess the mode of inheritance of this variation, we also analyzed the pheromone composition of F1 hybrid females. Results Relative to intra-strain variation, the pheromone composition of the two strains differed significantly. Corn strain females contained significantly more of the second most abundant pheromone compound Z11-16:Ac (m, and significantly less of most other compounds, than rice strain females. When females were injected with PBAN before their glands were extracted, the differences between the strains were less pronounced but still statistically significant. The pheromone composition of hybrid females showed a maternal inheritance of the major component Z9-14:Ac (M as well as of Z11-16:Ac (m. Most other compounds showed an inheritance indicating genetic dominance of the corn strain. The within-strain phenotypic correlations among the various components were consistent with their hypothesized biosynthetic pathway, and between-strain differences in the correlation structure suggested candidate genes that may explain the pheromone differences between the two strains. These include Δ9- and Δ11 desaturases, and possibly also a Δ7-desaturase, although the latter has not been identified in insects so far. Conclusion The two host strains of S. frugiperda produce systematically differing female sex pheromone blends. Previously-documented geographic variation in the sexual communication of this species did not take strain identity into account, and thus may be

  18. Isolation, identification and characterization of regional indigenous Saccharomyces cerevisiae strains

    Directory of Open Access Journals (Sweden)

    Hana Šuranská

    2016-03-01

    Full Text Available Abstract In the present work we isolated and identified various indigenous Saccharomyces cerevisiae strains and screened them for the selected oenological properties. These S. cerevisiae strains were isolated from berries and spontaneously fermented musts. The grape berries (Sauvignon blanc and Pinot noir were grown under the integrated and organic mode of farming in the South Moravia (Czech Republic wine region. Modern genotyping techniques such as PCR-fingerprinting and interdelta PCR typing were employed to differentiate among indigenous S. cerevisiae strains. This combination of the methods provides a rapid and relatively simple approach for identification of yeast of S. cerevisiae at strain level. In total, 120 isolates were identified and grouped by molecular approaches and 45 of the representative strains were tested for selected important oenological properties including ethanol, sulfur dioxide and osmotic stress tolerance, intensity of flocculation and desirable enzymatic activities. Their ability to produce and utilize acetic/malic acid was examined as well; in addition, H2S production as an undesirable property was screened. The oenological characteristics of indigenous isolates were compared to a commercially available S. cerevisiae BS6 strain, which is commonly used as the starter culture. Finally, some indigenous strains coming from organically treated grape berries were chosen for their promising oenological properties and these strains will be used as the starter culture, because application of a selected indigenous S. cerevisiae strain can enhance the regional character of the wines.

  19. Tip-enhanced Raman spectroscopy for nanoscale strain characterization.

    Science.gov (United States)

    Tarun, Alvarado; Hayazawa, Norihiko; Kawata, Satoshi

    2009-08-01

    Tip-enhanced Raman spectroscopy (TERS), which utilizes the strong localized optical field generated at the apex of a metallic tip when illuminated, has been shown to successfully probe the vibrational spectrum of today's and tomorrow's state-of-the-art silicon and next-generation semiconductor devices, such as quantum dots. Collecting and analyzing the vibrational spectrum not only aids in material identification but also provides insight into strain distributions in semiconductors. Here, the potential of TERS for nanoscale characterization of strain in silicon devices is reviewed. Emphasis will be placed on the key challenges of obtaining spectroscopic images of strain in actual strained silicon devices.

  20. Influence of pore pressure change on coseismic volumetric strain

    Science.gov (United States)

    Wang, Chi-Yuen; Barbour, Andrew J.

    2017-01-01

    Coseismic strain is fundamentally important for understanding crustal response to changes of stress after earthquakes. The elastic dislocation model has been widely applied to interpreting observed shear deformation caused by earthquakes. The application of the same theory to interpreting volumetric strain, however, has met with difficulty, especially in the far field of earthquakes. Predicted volumetric strain with dislocation model often differs substantially, and sometimes of opposite signs, from observed coseismic volumetric strains. The disagreement suggests that some processes unaccounted for by the dislocation model may occur during earthquakes. Several hypotheses have been suggested, but none have been tested quantitatively. In this paper we first examine published data to highlight the difference between the measured and calculated static coseismic volumetric strains; we then use these data to provide quantitative test of the model that the disagreement may be explained by the change of pore pressure in the shallow crust. The test allows us to conclude that coseismic change of pore pressure may be an important mechanism for coseismic crustal strain and, in the far field, may even be the dominant mechanism. Thus in the interpretation of observed coseismic crustal strain, one needs to account not only for the elastic strain due to fault rupture but also for the strain due to coseismic change of pore pressure.

  1. International Clostridium difficile animal strain collection and large diversity of animal associated strains

    DEFF Research Database (Denmark)

    Janezic, Sandra; Zidaric, Valerija; Pardon, Bart

    2014-01-01

    as well as in terms of number of different host species: 078 (14.3% of isolates; 4 hosts), 014/020 (11.6%; 8 hosts); 002 (5.4%; 4 hosts) and 012 (5.4%; 5 hosts). Two animal hosts were best represented; cattle with 31 isolates (20 PCR ribotypes; 7 countries) and pigs with 31 isolates (16 PCR ribotypes; 10......Background: Clostridium difficile is an important cause of intestinal infections in some animal species and animals might be a reservoir for community associated human infections. Here we describe a collection of animal associated C. difficile strains from 12 countries based on inclusion criteria...... of one strain (PCR ribotype) per animal species per laboratory. Results: Altogether 112 isolates were collected and distributed into 38 PCR ribotypes with agarose based approach and 50 PCR ribotypes with sequencer based approach. Four PCR ribotypes were most prevalent in terms of number of isolates...

  2. Biaxial load effects on the crack border elastic strain energy and strain energy rate

    Science.gov (United States)

    Eftis, J.; Subramonian, N.; Liebowitz, H.

    1977-01-01

    The validity of the singular solution (first term of a series representation) is investigated for the crack tip stress and displacement field in an infinite sheet with a flat line crack with biaxial loads applied to the outer boundaries. It is shown that if one retains the second contribution to the series approximations for stress and displacement in the calculation of the local elastic strain energy density and elastic strain energy rate in the crack border region, both these quantities have significant biaxial load dependency. The value of the J-integral does not depend on the presence of the second term of the series expansion for stress and displacement. Thus J(I) is insensitive to the presence of loads applied parallel to the plane of the crack.

  3. Evaluation of Brucella abortus strain RB51 and strain 19 in pronghorn antelope

    Science.gov (United States)

    Elzer, P.H.; Smith, J.; Roffe, T.; Kreeger, T.; Edwards, J.; Davis, D.

    2002-01-01

    Free-roaming elk and bison in the Greater Yellowstone Area remain the only wildlife reservoirs for Brucella abortus in the United States, and the large number of animals and a lack of holding facilities make it unreasonable to individually vaccinate each animal. Therefore, oral delivery is being proposed as a possible option to vaccinate these wild ungulates. One of the main problems associated with oral vaccination is the potential exposure of nontarget species to the vaccines. The purpose of this study was to determine the effects of two Brucella vaccines, strain 19 (S19) and the rough strain RB51 (SRB51), in pregnant pronghorn antelope. We conclude that S19 and SRB51 rarely colonize maternal and fetal tissues of pregnant pronghorn and were not associated with fetal death. Oral delivery of either vaccine at this dose appears to be nonhazardous to pregnant pronghorn.

  4. Large Strain Range Dynamic Testing at High and Medium Strain Rates, Using a Common Scale SHPB

    OpenAIRE

    Zhao, H.; Gary, G.

    1997-01-01

    The measuring duration of a SHPB (Split Hopkinson Pressure Bar) set-up is limited by the length of the bars because of the superimposition of the waves propagating in opposite directions, so that there exists a limitation of maximum measurable strains in material testing applications. This paper presents a new two-gauges measurement method taking account of the correction of wave dispersion effects, as it is indeed indispensable for long time measurements. Using bars of common dimensions, it ...

  5. Complete genome sequence of Kytococcus sedentarius type strain (strain 541T)

    OpenAIRE

    Sims, David

    2008-01-01

    Kytococcus sedentarius (ZoBell and Upham 1944) Stackebrandt et al. 1995 is the type strain of the species, and is of phylogenetic interest because of its location in the Dermacoccaceae, a poorly studied family within the actinobacterial suborder Micrococcineae. K. sedentarius is known for the production of oligoketide antibiotics as well as for its role as an opportunistic pathogen causing valve endocarditis, hemorrhagic pneumonia, and pitted keratolysis. It is strictly aerobic and can only g...

  6. Draft genome sequences of eight bacteria isolated from the indoor environment: Staphylococcus capitis strain H36, S. capitis strain H65, S. cohnii strain H62, S. hominis strain H69, Microbacterium sp. strain H83, Mycobacterium iranicum strain H39, Plantibacter sp. strain H53, and Pseudomonas oryzihabitans strain H72

    OpenAIRE

    Lymperopoulou, Despoina S.; Coil, David A.; Schichnes, Denise; Lindow, Steven E.; Jospin, Guillaume; Eisen, Jonathan A.; Adams, Rachel I.

    2017-01-01

    We report here the draft genome sequences of eight bacterial strains of the genera Staphylococcus, Microbacterium, Mycobacterium, Plantibacter, and Pseudomonas. These isolates were obtained from aerosol sampling of bathrooms of five residences in the San Francisco Bay area. Taxonomic classifications as well as the genome sequence and gene annotation of the isolates are described. As part of the ?Built Environment Reference Genome? project, these isolates and associated genome data provide val...

  7. Comparative genomic and functional analysis of 100 Lactobacillus rhamnosus strains and their comparison with strain GG.

    Directory of Open Access Journals (Sweden)

    François P Douillard

    Full Text Available Lactobacillus rhamnosus is a lactic acid bacterium that is found in a large variety of ecological habitats, including artisanal and industrial dairy products, the oral cavity, intestinal tract or vagina. To gain insights into the genetic complexity and ecological versatility of the species L. rhamnosus, we examined the genomes and phenotypes of 100 L. rhamnosus strains isolated from diverse sources. The genomes of 100 L. rhamnosus strains were mapped onto the L. rhamnosus GG reference genome. These strains were phenotypically characterized for a wide range of metabolic, antagonistic, signalling and functional properties. Phylogenomic analysis showed multiple groupings of the species that could partly be associated with their ecological niches. We identified 17 highly variable regions that encode functions related to lifestyle, i.e. carbohydrate transport and metabolism, production of mucus-binding pili, bile salt resistance, prophages and CRISPR adaptive immunity. Integration of the phenotypic and genomic data revealed that some L. rhamnosus strains possibly resided in multiple niches, illustrating the dynamics of bacterial habitats. The present study showed two distinctive geno-phenotypes in the L. rhamnosus species. The geno-phenotype A suggests an adaptation to stable nutrient-rich niches, i.e. milk-derivative products, reflected by the alteration or loss of biological functions associated with antimicrobial activity spectrum, stress resistance, adaptability and fitness to a distinctive range of habitats. In contrast, the geno-phenotype B displays adequate traits to a variable environment, such as the intestinal tract, in terms of nutrient resources, bacterial population density and host effects.

  8. Strain Rate Effect on Tensile Behavior for a High Specific Strength Steel: From Quasi-Static to Intermediate Strain Rates

    OpenAIRE

    Wei Wang; Yan Ma; Muxin Yang; Ping Jiang; Fuping Yuan; Xiaolei Wu

    2017-01-01

    The strain rate effect on the tensile behaviors of a high specific strength steel (HSSS) with dual-phase microstructure has been investigated. The yield strength, the ultimate strength and the tensile toughness were all observed to increase with increasing strain rates at the range of 0.0006 to 56/s, rendering this HSSS as an excellent candidate for an energy absorber in the automobile industry, since vehicle crushing often happens at intermediate strain rates. Back stress hardening has been ...

  9. Comparison of Bacteroides zoogleoformans strains isolated from soft tissue infections in cats with strains from periodontal disease in humans.

    OpenAIRE

    Love, D N; Johnson, J L; Jones, R F; Bailey, M

    1985-01-01

    A total of 11 strains of Bacteroides zoogleoformans were isolated from 11 of 106 different cat subcutaneous "fight wound" abscesses and were among a total of 143 Bacteroides species isolated from these samples. They constituted 3.4% (11 of 325) of all anaerobic isolates. The cat strains and strains of B. zoogleoformans isolated from humans with periodontal disease were similar phenotypically as determined by biochemical reactions, polyacrylamide gel electrophoresis patterns of soluble protein...

  10. Strain predominance following exposure of vaccinated and naive pregnant gilts to multiple strains of porcine reproductive and respiratory syndrome virus

    OpenAIRE

    Lager, Kelly M.; Mengeling, William L.; Wesley, Ronald D.

    2003-01-01

    Two studies were performed in order to test the relative ability of different strains of porcine reproductive and respiratory syndrome virus (PRRSV) to replicate and cross the placental barrier in pregnant gilts. Study 1 comprised 6 nonvaccinated gilts. Study 2 comprised 8 nonvaccinated gilts and 12 gilts that were vaccinated twice before conception. On, or about, gestation day 90 all gilts were simultaneously exposed to 20 field strains of PRRSV (all strains were distinguishable by restricti...

  11. Effects of gauge volume on pseudo-strain induced in strain measurement using time-of-flight neutron diffraction

    Science.gov (United States)

    Suzuki, Hiroshi; Harjo, Stefanus; Abe, Jun; Xu, Pingguang; Aizawa, Kazuya; Akita, Koichi

    2013-07-01

    Spurious or pseudo-strains observed in time-of-flight (TOF) neutron diffraction due to neutron attenuation, surface-effects and a strain distribution within the gauge volume were investigated. Experiments were carried out on annealed and bent ferritic steel bars to test these effects. The most representative position in the gauge volume corresponds to the neutron-weighted center of gravity (ncog), which takes into account variations in intensity within the gauge volume due to neutron attenuation and/or absence of material in the gauge volume. The average strain in the gauge volume was observed to be weighted towards the ncog position but following an increase in the size of the gauge volume the weighted average strain was changed because of the change in the ncog position when a strain gradient appeared within the gauge volume. On the other hand, typical pseudo-strains, which are well known, did appear in through-surface strain measurements when the gauge volume was incompletely filled by the sample. Tensile pseudo-strains due to the surface-effect increased near the sample surface and exhibited a similar trend regardless of the size of the gauge volume, while the pseudo-strains increased faster for the smaller gauge volume. Furthermore, a pseudo-strain due to a change in the ncog position was observed even when the gauge volume was perfectly filled in the sample, and it increased with an increase in the size of the gauge volume. These pseudo-strains measured were much larger than those simulated by the conventional modeling, whereas they were simulated by taking into account an incident neutron beam divergence additionally in the model. Therefore, the incident divergence of the incident neutron beam must be carefully designed to avoid pseudo-strains in time-of-flight neutron diffractometry.

  12. Strain Rate Effect on Tensile Behavior for a High Specific Strength Steel: From Quasi-Static to Intermediate Strain Rates

    Directory of Open Access Journals (Sweden)

    Wei Wang

    2017-12-01

    Full Text Available The strain rate effect on the tensile behaviors of a high specific strength steel (HSSS with dual-phase microstructure has been investigated. The yield strength, the ultimate strength and the tensile toughness were all observed to increase with increasing strain rates at the range of 0.0006 to 56/s, rendering this HSSS as an excellent candidate for an energy absorber in the automobile industry, since vehicle crushing often happens at intermediate strain rates. Back stress hardening has been found to play an important role for this HSSS due to load transfer and strain partitioning between two phases, and a higher strain rate could cause even higher strain partitioning in the softer austenite grains, delaying the deformation instability. Deformation twins are observed in the austenite grains at all strain rates to facilitate the uniform tensile deformation. The B2 phase (FeAl intermetallic compound is less deformable at higher strain rates, resulting in easier brittle fracture in B2 particles, smaller dimple size and a higher density of phase interfaces in final fracture surfaces. Thus, more energy need be consumed during the final fracture for the experiments conducted at higher strain rates, resulting in better tensile toughness.

  13. Material Properties Test to Determine Ultimate Strain and True Stress-True Strain Curves for High Yield Steels

    Energy Technology Data Exchange (ETDEWEB)

    K.R. Arpin; T.F. Trimble

    2003-04-01

    This testing was undertaken to develop material true stress-true strain curves for elastic-plastic material behavior for use in performing transient analysis. Based on the conclusions of this test, the true stress-true strain curves derived herein are valid for use in elastic-plastic finite element analysis for structures fabricated from these materials. In addition, for the materials tested herein, the ultimate strain values are greater than those values cited as the limits for the elastic-plastic strain acceptance criteria for transient analysis.

  14. The Genetically Remote Pathogenic Strain NVH391-98 of the Bacillus cereus Group Represents the Cluster of Thermophilic Strains

    Energy Technology Data Exchange (ETDEWEB)

    Auger, Sandrine; Galleron, Nathalie; Bidnenko, Elena; Ehrlich, S. Dusko; Lapidus, Alla; Sorokin, Alexei

    2007-10-02

    Bacteria of the Bacillus cereus group are known to cause food poisoning. A rare phylogenetically remote strain, NVH391-98, was recently characterized to encode a particularly efficient cytotoxin K presumably responsible for food poisoning. This pathogenic strain and its close relatives can be phenotypically distinguished from other strains of the B. cereus group by the inability to grow at temperatures below 17 degrees C and by the ability to grow at temperatures from 48 to 53 degrees C. A temperate phage, phBC391A2, residing in the genome of NVH391-98 allows us to distinguish the three known members of this thermophilic strain cluster.

  15. Intraspecies diversity of Lactobacillus sakei response to oxidative stress and variability of strain performance in mixed strains challenges.

    Science.gov (United States)

    Guilbaud, Morgan; Zagorec, Monique; Chaillou, Stéphane; Champomier-Vergès, Marie-Christine

    2012-04-01

    Lactobacillus sakei is a meat-borne lactic acid bacterium species exhibiting a wide genomic diversity. We have investigated the diversity of response to various oxidative compounds, between L. sakei strains, among a collection representing the genomic diversity. We observed various responses to the different compounds as well as a diversity of response depending on the aeration conditions used for cell growth. A principal component analysis revealed two main phenotypic groups, partially correlating with previously described genomic clusters. We designed strains mixes composed of three different strains, in order to examine the behavior of each strain, when cultured alone or in the presence of other strains. The strains composing the mixtures were chosen as diverse as possible, i.e. exhibiting diverse responses to oxidative stress and belonging to different genomic clusters. Growth and survival rates of each strain were monitored under various aeration conditions, with or without heme supplementation. The results obtained suggest that some strains may act as "helper" or "burden" strains depending on the oxidative conditions encountered during incubation. This study confirms that resistance to oxidative stress is extremely variable within the L. sakei species and that this property should be considered when investigating starter performance in the complex meat bacterial ecosystems. Copyright © 2011 Elsevier Ltd. All rights reserved.

  16. Role Strain in Collegiate Athletic Training Approved Clinical Instructors

    Science.gov (United States)

    Henning, Jolene M; Weidner, Thomas G

    2008-01-01

    Context: Certified athletic trainers who serve as Approved Clinical Instructors (ACIs) in the collegiate setting are balancing various roles (eg, patient care and related administrative tasks, clinical education). Whether this balancing act is associated with role strain in athletic trainers has not been examined. Objective: To examine the degree of, and contributing factors (eg, socialization experiences, professional and employment demographics, job congruency) to, role strain in collegiate ACIs. Design: Cross-sectional survey design. Setting: Geographically stratified random sample of ACIs affiliated with accredited athletic training education programs at National Collegiate Athletic Association (NCAA) Division I, II, and III institutions. Patients or Other Participants: 118 collegiate ACIs (47 head athletic trainers, 45 assistant athletic trainers, 26 graduate assistant athletic trainers). Main Outcome Measure(s): The Athletic Training ACI Role Strain Inventory, which measures total degree of role strain, 7 subscales of role strain, socialization experiences, professional and employment characteristics, and congruency in job responsibilities. Results: A total of 49% (n  =  58) of the participants experienced a moderate to high degree of role strain. Role Overload was the highest contributing subscale to total role strain. No differences were noted between total role strain and role occupant groups, NCAA division, or sex. Graduate assistant athletic trainers experienced a greater degree of role incompetence than head athletic trainers did (P  =  .001). Division II ACIs reported a greater degree of inter-role conflict than those in Division I (P  =  .02). Female ACIs reported a greater degree of role incompetence than male ACIs (P  =  .01). Those ACIs who stated that the ACI training provided by their institution did not adequately prepare them for the role as an ACI experienced greater role strain (P < .001). Conclusions: The ACIs in the

  17. Enterococcus faecium strains characterization through polymorphism study of VNTR loci

    Directory of Open Access Journals (Sweden)

    Belteghi, C.,

    2008-12-01

    Full Text Available Enterococci are commensally bacteria of the gastrointestinal and female genital tract in humans and some mammals and birds, and one of the significant causes of hospital-acquired infections, especially in immuno-compromised patients. Genetic fingerprinting (DNA fingerprinting is a tool for identifying, marking and prevention of infectious agents dissemination. SSR (short sequence repeat are known to suffer frequent variations in the number of repetitive units.MLVA (multiple locus variable number tandem repeats analysis is a variant of genetic fingerprinting, in epidemiological studies on the pathogenetic Enterococcus faecium. Our study included laboratory Enterococcus faecium strains or isolated from clinical cases or from the environment (2003-2008. All analyzed strains of Enterococcus faecium were sensitive to vancomycin, except BM4147, and resistant to oxacilin. Strains isolated from the birds’ samples have shown a smaller resistance profile than those of human origin. 33 Enterococus faecium strains were analyzed by PCR amplification. 27 MT (VNTR profiles were obtained: six in the case of the strains isolated from birds, 15 in the case of the strains isolated form humans, 4 in the case of the collection strains and 2 in the case of the strains isolated from water samples. Among the strains isolated from humans and those isolated from animals, identical profiles were not recorded. Within the strains isolated from clinical cases, and those isolated from birds, circulating genotypes were noted, which can be considered as epidemical. The strains used as probiotics proved to be different from those circulating in birds. All MLVA profiles codes compared with those published on line in the UMC Utrecht database proved to be different. Results obtained in this study support the usefulness of the polymorphic VNTR analysis, as genetic marker, inepidemiological investigations.

  18. Microtexture of Strain in electroplated copper interconnects

    International Nuclear Information System (INIS)

    Spolenak, R.; Barr, D.L.; Gross, M.E.; Evans-Lutterodt, K.; Brown, W.L.; Tamura, N.; MacDowell, A.A.; Celestre, R.S.; Padmore, H.A.; Valek, B.C.; Bravman, J.C.; Flinn, P.; Marieb, T.; Keller, R.R.; Batterman, B.W.; Patel, J.R.

    2001-01-01

    The microstructure of narrow metal conductors in the electrical interconnections on IC chips has often been identified as of major importance in the reliability of these devices. The stresses and stress gradients that develop in the conductors as a result of thermal expansion differences in the materials and of electromigration at high current densities are believed to be strongly dependent on the details of the grain structure. The present work discusses new techniques based on microbeam x-ray diffraction (MBXRD) that have enabled measurement not only of the microstructure of totally encapsulated conductors but also of the local stresses in them on a micron and submicron scale. White x-rays from the Advanced Light Source were focused to a micron spot size by Kirkpatrick-Baez mirrors. The sample was stepped under the micro-beam and Laue images obtained at each sample location using a CCD area detector. Microstructure and local strain were deduced from these images. Cu lines with widths ranging from 0.8 mm to 5 mm and thickness of 1 mm were investigated. Comparisons are made between the capabilities of MBXRD and the well established techniques of broad beam XRD, electron back scatter diffraction (EBSD) and focused ion beam imagining (FIB)

  19. Emergent Strain Stiffening in Interlocked Granular Chains

    Science.gov (United States)

    Dumont, Denis; Houze, Maurine; Rambach, Paul; Salez, Thomas; Patinet, Sylvain; Damman, Pascal

    2018-02-01

    Granular chain packings exhibit a striking emergent strain-stiffening behavior despite the individual looseness of the constitutive chains. Using indentation experiments on such assemblies, we measure an exponential increase in the collective resistance force F with the indentation depth z and with the square root of the number N of beads per chain. These two observations are, respectively, reminiscent of the self-amplification of friction in a capstan or in interleaved books, as well as the physics of polymers. The experimental data are well captured by a novel model based on these two ingredients. Specifically, the resistance force is found to vary according to the universal relation log F ˜μ √{N }Φ11 /8z /b , where μ is the friction coefficient between two elementary beads, b is their size, and Φ is the volume fraction of chain beads when semidiluted in a surrounding medium of unconnected beads. Our study suggests that theories normally confined to the realm of polymer physics at a molecular level can be used to explain phenomena at a macroscopic level. This class of systems enables the study of friction in complex assemblies, with practical implications for the design of new materials, the textile industry, and biology.

  20. Pretransformation strain modulations in proper ferroelastics

    Energy Technology Data Exchange (ETDEWEB)

    Saxena, A. (Los Alamos National Lab., NM (United States)); Barsch, G.R. (Pennsylvania State Univ., University Park, PA (United States))

    1992-01-01

    Within the framework of the Landau-Ginzburg model for the 0[sub h]-D[sub 4h] proper ferroelastic transformation pretransformation structural modulations may arise as (possibly defect-stabilized) pseudo-critical fluctuations that can be described by an effective elastic [phi][sub 4] model. Here we show that the strain amplitude and temperature dependence of an intermediate tetragonal phase observed above and concurrently with the face-centered cubic to face-centered tetragonal transition in Fe[sub 0.7]Pd[sub 0.3] can be understood semi-quantitatively in terms of the crossover behavior from the Ising to the displacive limit by applying the crossover phase diagram of Beale, Sarker and Krumhanal to the effective [phi][sup 4] model. The fact that this type of pretransformation modulation has not been observed with X-ray for other ferroelastic transformations can be attributed to large values of the order parameter gradient coefficient in these cases.

  1. Pretransformation strain modulations in proper ferroelastics

    Energy Technology Data Exchange (ETDEWEB)

    Saxena, A. [Los Alamos National Lab., NM (United States); Barsch, G.R. [Pennsylvania State Univ., University Park, PA (United States)

    1992-12-31

    Within the framework of the Landau-Ginzburg model for the 0{sub h}-D{sub 4h} proper ferroelastic transformation pretransformation structural modulations may arise as (possibly defect-stabilized) pseudo-critical fluctuations that can be described by an effective elastic {phi}{sub 4} model. Here we show that the strain amplitude and temperature dependence of an intermediate tetragonal phase observed above and concurrently with the face-centered cubic to face-centered tetragonal transition in Fe{sub 0.7}Pd{sub 0.3} can be understood semi-quantitatively in terms of the crossover behavior from the Ising to the displacive limit by applying the crossover phase diagram of Beale, Sarker and Krumhanal to the effective {phi}{sup 4} model. The fact that this type of pretransformation modulation has not been observed with X-ray for other ferroelastic transformations can be attributed to large values of the order parameter gradient coefficient in these cases.

  2. SPIRT. Stress-Strains from Transient Pressures

    Energy Technology Data Exchange (ETDEWEB)

    Siefken, L.J. [EG and G Idaho, Inc., Idaho Falls, ID, (United States)

    1992-03-03

    The SPIRT (Stress-strains from Pressures Instigated by Reactor Transients) program was developed to predict the pressure generated by the rapid dispersal of molten UO2 from power-reactor-type fuel rods into the coolant water. This rapid dispersal of molten fuel results from very high-power excursions initiated by the rapid insertion of reactivity. SPIRT was used in the safety analyses of the ATR and ETR. The program can analyze the response of one-dimensional plane, cylindrical, and spherical geometric configurations to pressure-generating heat sources with free-surface or fixed-surface boundary conditions. SPIRT can calculate the response of systems to the dispersal of hot fuel particles as a function of the following variables: enthalpy of fuel at time of dispersal, rate at which fuel is dispersed, size of dispersed fuel droplets, dispersal density of fuel (grams of fuel dispersed per cc of water), quality of water at time of fuel dispersal, enthalpy of water at time of fuel dispersal, system pressure at time of fuel dispersal, and the size and constituency of the medium enveloping the dispersed fuel. By holding all but one of the listed variables constant, and varying that one, the program computes the relative effect of that variable upon the response of systems to the dispersal of hot fuel. SPIRT exists as two releases one, written for UO2 fuel is called SPIRTU; the second, for uranium-aluminide fuel is identified as SPIRTA.

  3. Caregiver Strain and Youth Suicide Attempt: Are They Related?

    Science.gov (United States)

    Barksdale, Crystal L.; Walrath, Christine M.; Compton, Jill S.; Goldston, David B.

    2009-01-01

    There are scant data documenting the relationship between caregiver strain and suicidal behavior among youth. This study includes data from the caregivers of 1,854 youth who received services through the Comprehensive Community Mental Health Services for Children and Their Families Program. Caregiver strain, family functioning, and youth…

  4. Strain characterization of FinFETs using Raman spectroscopy

    NARCIS (Netherlands)

    Kaleli, B.; van Hemert, T.; Hueting, Raymond Josephus Engelbart; Wolters, Robertus A.M.

    2013-01-01

    Metal induced strain in the channel region of silicon (Si) fin-field effect transistor (FinFET) devices has been characterized using Raman spectroscopy. The strain originates from the difference in thermal expansion coefficient of Si and titanium-nitride. The Raman map of the device region is used

  5. Genomic and gene variation in Mycoplasma hominis strains

    DEFF Research Database (Denmark)

    Christiansen, Gunna; Andersen, H; Birkelund, Svend

    1987-01-01

    DNAs from 14 strains of Mycoplasma hominis isolated from various habitats, including strain PG21, were analyzed for genomic heterogeneity. DNA-DNA filter hybridization values were from 51 to 91%. Restriction endonuclease digestion patterns, analyzed by agarose gel electrophoresis, revealed no ide...

  6. AFLP analysis of genetic diversity in main cultivated strains of ...

    African Journals Online (AJOL)

    Ganoderma mushroom is one of the most prescribed traditional medicines, which has been used for medicinal purposes for centuries particularly in China, Japan, Korea and other Asian countries. In this article, the different strains of Ganoderma spp. used in production and their genetic relations of the closely related strains ...

  7. Fusion of two yeast strains for enhanced crude oil degradation ...

    African Journals Online (AJOL)

    A hybrid strain S24 was developed from Saccharomyces cerevisiae Y5A and Saccharomyces carlsbergensis Y7B, using protoplast fusion technique. The yeast protoplasts were prepared using gut juice from Helix pomatia (Land Snail) as cell digesting enzyme. The ability of the wild and the hybrid strains to degrade medium ...

  8. Growth performance of three commercial strains of turkey ...

    African Journals Online (AJOL)

    At 16 weeks of age correlation values for body parts against body weight were mostly negative across the treatment groups. It was evident from the results of this study that any of the turkey strains can be reared for meat without emphasis on plumage except at the discretion of the farmer. Keywords: Turkeys, Strains, Growth ...

  9. Critical Strain Determination Based on the Euler-Fresnel Jig

    NARCIS (Netherlands)

    S Koussios; K Tazelaar; NB Roozen; A Beukers

    2015-01-01

    When considering a composite strip or plate under certain thermal and environmental conditions and loadings, there is a minimum strain threshold for the appearance of the first micro crack. The associated strain level is defined here as “critical strain”. There are various active displacement

  10. Changes occurring in plain, straining and winter yoghurt during the ...

    African Journals Online (AJOL)

    In this study, winter yoghurt, straining yoghurt and yoghurt samples produced from homogenized and non-homogenized sheep and a mixture of sheep and cows milks were evaluated during the storage periods. Winter yoghurt, straining yoghurt and yoghurt samples were stored in sterile jars in the refrigerator (4°C).

  11. Twinning in copper deformed at high strain rates

    Indian Academy of Sciences (India)

    Abstract. Copper samples having varying microstructures were deformed at high strain rates using a split-. Hopkinson pressure bar. Transmission electron microscopy results show deformation twins present in samples that were both annealed and strained, whereas samples that were annealed and left unstrained, as well ...

  12. Manumycin from a new Streptomyces strain shows antagonistic ...

    African Journals Online (AJOL)

    Manumycin from a new Streptomyces strain shows antagonistic effect against methicillin-resistant Staphylococcus aureus (MRSA)/vancomycin-resistant enterococci (VRE) strains from Korean Hospitals. Yun Hee Choi, Seung Sik Cho, Jaya Ram Simkhada, Chi Nam Seong, Hyo Jeong Lee, Hong Seop Moon, Jin Cheol Yoo ...

  13. Draft Genome Sequence of Mycobacterium chimaera Type Strain Fl-0169

    Science.gov (United States)

    We report the draft genome sequence of the type strain Mycobacterium chimaera Fl-0169T, a member of the Mycobacterium avium complex (MAC). M. chimaera Fl-0169T was isolated from a patient in Italy and is highly similar to strains of M. chimaera isolated in Ireland, though Fl-016...

  14. Intraspecific hybridization studies in three wild strains of ...

    African Journals Online (AJOL)

    There were no significant (P > 0.05) differences in the weight of the three parental strains and the six intraspecific hybrids at hatching and six weeks of rearing indoor aquaria and outdoor concrete tanks. The best survival value of 96% was recorded for the Jos strain followed by that of the hybrid cross involving female Jos ...

  15. Impact of SEG on uniaxially strained MuGFET performance

    Science.gov (United States)

    Agopian, Paula Ghedini Der; Pacheco, Vinícius Heltai; Martino, João Antonio; Simoen, Eddy; Claeys, Cor

    2011-05-01

    This work focuses on the impact of the source and drain Selective Epitaxial Growth (SEG) on the performance of uniaxially strained MuGFETs. With the channel length reduction, the normalized transconductance (gm. L/ W) of unstressed MuGFETs decreases due to the series resistance and short channel effects (SCE), while the presence of uniaxial strain improves the gm. The competition between the series resistance ( Rs) and the uniaxial strain results in a normalized gm maximum point for a specific channel length. Since the SEG structure influences both Rs and the strain in the channel, this work studies from room down to low temperature how these effects influence the performance of the triple-gate FETs. For lower temperatures, the strain-induced mobility enhancement increases and leads to a shift in the maximum point towards shorter channel lengths for devices without SEG. This shift is not observed for devices with SEG where the strain level is much lower. At 150 K the gm behavior of short channel strained devices with SEG is similar to the non SEG ones due to the better gm temperature enhancement for devices without SEG caused by the strain. For lower temperatures SEG structure is not useful anymore.

  16. On the role of dislocations in heavily strained materials

    NARCIS (Netherlands)

    de Hosson, J.T.M.; Kanert, O.; Arsenault, RJ; Cole, D; Gross, T; Sizek, H; Liaw, P; Parameswaran, S; Kostorz, G

    1996-01-01

    As a tribute to professor Hans Weertman upon the occasion of his 70th birthday this paper deals with the role of dislocations in materials deformed at very high strain rates. In contrast to classical crystal deformation experiments which occur typically at strain rates of 10(-5) s(-1) to 10(-1)

  17. Strain sensitivity of band gaps of Sn-containing semiconductors

    DEFF Research Database (Denmark)

    Li, Hong; Castelli, Ivano Eligio; Thygesen, Kristian Sommer

    2015-01-01

    Tuning of band gaps of semiconductors is a way to optimize materials for applications within photovoltaics or as photocatalysts. One way to achieve this is through applying strain to the materials. We investigate the effect of strain on a range of Sn-containing semiconductors using density...

  18. Factors related to caregiver strain in ALS: a longitudinal study

    NARCIS (Netherlands)

    Creemers, Huub; de Morée, Sandra; Veldink, Jan H.; Nollet, Frans; van den Berg, Leonard H.; Beelen, Anita

    2016-01-01

    To examine the longitudinal associations between caregiver strain and patients' clinical and psychosocial characteristics as well as caregivers' psychosocial characteristics. At 4-month intervals during the 12 months study period, longitudinal data on caregiver strain and patient and caregiver

  19. Stress-strain state of pipeline depending on complicated environment

    Science.gov (United States)

    Burkov, P. V.; Filimonenko, M. A.; Burkova, S. P.

    2016-09-01

    The paper presents the 3D model and FEM analysis of the stress-strain state of the soil- pipe interaction system. The analysis shows that the geological environment has shown a strong effect on the pipelines. This stress-strain analysis is carried out using the ANSYS finite element program.

  20. Characterization of Streptomyces strain SLO-105 isolated from Lake ...

    African Journals Online (AJOL)

    A microbial strain, SLO-105, isolated from Lake Oubeira sediment was screened for its antimicrobial activity against pathogenic bacteria and fungi. The strain showed broad-spectrum antibacterial activity against Gram-positive bacteria Staphylococcus aureus MRSA, Bacillus subtilus, Micrococcus leutus, Streptococcus ...

  1. Study of probiotic potential of four wild Lactobacillus rhamnosus strains.

    Science.gov (United States)

    Tuo, Yanfeng; Zhang, Weiqin; Zhang, Lanwei; Ai, Lianzhong; Zhang, Yingchun; Han, Xue; Yi, Huaxi

    2013-06-01

    The four wild Lactobacillus rhamnosus strains were examined in vitro for resistance to simulated gastro and intestinal juices, adhesion to HT-29 cells, antagonistic activity against enteric pathogens and immunomodulating activity. The strains L. rhamnosus SB5L, J5L and IN1L were able to survive in simulated gastro juice while the strain L. rhamnosus SB31L lost viability exposed to simulated gastro juice for 3 h. The four strains had high viability in simulated small intestinal juice with little loss (strains SB5L, J5L and IN1L antagonized against Escherichia coli ATCC 25922, Salmonella enterica serovar Typhimurium ATCC 14028, Shigella sonnei ATCC 25931. The strain L. rhamnosus IN1L had the highest adhesive capability to HT-29 cells in vitro (251 bacteria cells per 100 HT-29 cells) compared to the other three L. rhamnosus strains. The live bacteria, cell wall and DNA of the four L. rhamnosus induced the secretion of pro-inflammatory cytokines IL-12 (p70), IFN-γ and TNF-α by human peripheral blood mononuclear cells (PBMCs). The levels of IL-12 (p70), IFN-γ and TNF-α produced by stimulated PBMCs were significantly higher (P strains have the potential as the probiotic for human being use, although further studies are still needed. Crown Copyright © 2013. Published by Elsevier Ltd. All rights reserved.

  2. Evaluation of Lactobacillus strains for selected probiotic properties.

    Science.gov (United States)

    Turková, Kristýna; Mavrič, Anja; Narat, Mojca; Rittich, Bohuslav; Spanová, Alena; Rogelj, Irena; Matijašić, Bojana Bogovič

    2013-07-01

    Eleven strains of Lactobacillus collected in the Culture Collection of Dairy Microorganisms (CCDM) were evaluated for selected probiotic properties such as survival in gastrointestinal fluids, antimicrobial activity, and competition with non-toxigenic Escherichia coli O157:H7 for adhesion on Caco-2 cells. The viable count of lactobacilli was reduced during 3-h incubation in gastric fluid followed by 3-h incubation in intestinal fluid. All strains showed antimicrobial activity and the three most effective strains inhibited the growth of at least 16 indicator strains. Antimicrobial metabolites of seven strains active against Lactobacillus and Clostridium indicator strains were found to be sensitive to proteinase K and trypsin, which indicates their proteinaceous nature. The degree of competitive inhibition of non-toxigenic E. coli O157:H7 adhesion on the surface of Caco-2 cells was strain-dependent. A significant decrease (P strains were selected for additional studies of antimicrobial activity, i.e., Lactobacillus gasseri CCDM 215, Lactobacillus acidophilus CCDM 149, and Lactobacillus helveticus CCDM 82.

  3. PROPERTIES OF NEW STRAINS CHEMOLITHOTROPHIC BACTERIA ISOLATED FROM INDUSTRIAL SUBSTRATES

    Directory of Open Access Journals (Sweden)

    I. A.

    2015-12-01

    Full Text Available The purpose of the research was determination of strains Acidithiobacillus ferrooxidans MFLv37 and Acidithiobacillus ferrooxidans MFLad27, isolated from aboriginal consortium of coal beneficiation dumps and fly ash from coal combustion, resistance to heavy metals, forming part of these waste, as well as adaption ability of the strains to new substrates. New strains increased resistance to heavy metal ions as compared to A. ferrooxidans standard and collection strains is found; minimal inhibitory concentrations of heavy and toxic metals are determined; a number of metals that have negative impact on growth of isolated cultures are identified. It is shown that the minimal metals concentrations, at which strains growth still happens, are several times higher than their concentrations in technogenic waste. It has been established that isolated strains differed in their ability to adapt, as well as in growth rate and substrates oxidation. This is due to the specific conditions of microbiocenoses formation in making and further storage of rock dumps and fly ash, whereof the appropriate strains are isolated. The investigations indicate the necessity in directional selection of strains that are resistant to the toxic compounds and are able to oxidize various mineral substrates, as well as in their adaptation to new substrates for the extraction of heavy metals.

  4. Isolation and characterization of lipase-producing Bacillus strains ...

    African Journals Online (AJOL)

    Bacillus strains (B1 - B5) producing extra cellular lipase were isolated from the soil sample of coconut oil industry. The strains were identified by morphological and biochemical characters. Growth of the organisms and lipase production were measured with varying pH (4 - 9) temperature (27, 37 and 47ºC) and various ...

  5. Job strain in relation to body mass index

    DEFF Research Database (Denmark)

    Nyberg, S T; Heikkilä, K; Fransson, E I

    2012-01-01

    Evidence of an association between job strain and obesity is inconsistent, mostly limited to small-scale studies, and does not distinguish between categories of underweight or obesity subclasses.......Evidence of an association between job strain and obesity is inconsistent, mostly limited to small-scale studies, and does not distinguish between categories of underweight or obesity subclasses....

  6. Aflatoxin B 1 producing potential of Aspergillus flavus strains ...

    African Journals Online (AJOL)

    Aflatoxin B 1 (AFB1) producing potential of different strains of Aspergillus flavus, isolated from 1,200 stored rice grains collected from 43 locations in 20 rice growing states in India was investigated. Eighty-five strains of A. flavus were isolated from the discolored rice grains and tested for their AFB1 producing potential on ...

  7. Characterization of Bacillus thuringiensis strains from Jordan and ...

    African Journals Online (AJOL)

    Eight serotypes with Bacillus thuringiensis israelensis being the most common. Out of the twenty-six isolated strains, five strains (serotype: kenyae, kurstaki, kurstaki HD1 and thuringiensis) that produced bipyramid crystal proteins were toxic to the lepidoptera larvae of Ephestia kuehniella Zeller. The SDS-PAGE protein ...

  8. Interplay between real and pseudomagnetic field in graphene with strain

    NARCIS (Netherlands)

    Kim, K.J.; Blanter, Y.M.; Ahn, K.H.

    2011-01-01

    We investigate electric and magnetic properties of graphene with rotationally symmetric strain. The strain generates a large pseudomagnetic field with alternating sign in space, which forms a strongly confined quantum dot connected to six chiral channels. The orbital magnetism, degeneracy, and

  9. Gender, General Strain Theory, Negative Emotions, and Disordered Eating

    Science.gov (United States)

    Piquero, Nicole Leeper; Fox, Kristan; Piquero, Alex R.; Capowich, George; Mazerolle, Paul

    2010-01-01

    Much of the prior work on General Strain Theory (GST) has focused on how strain and negative emotions interrelate to produce criminal--especially violent--activity. Very little research has extended GST to examine other types of non-criminal, negative behavior, such as self-harming behaviors associated with disordered eating, a traditionally…

  10. Highly hydrolytic reuteransucrase from probiotic Lactobacillus reuteri strain ATCC 55730

    NARCIS (Netherlands)

    Kralj, S.; Stripling, E.; Sanders, P.; Geel-Schutten, G.H. van; Dijkhuizen, L.

    2005-01-01

    Lactobacillus reuteri strain ATCC 55730 (LB BIO) was isolated as a pure culture from a Reuteri tablet purchased from the BioGaia company. This probiotic strain produces a soluble glucan (reuteran), in which the majority of the linkages are of the α-(1→4) glucosidic type (∼70%). This reuteran also

  11. Passive wireless strain monitoring of tire using capacitance change

    Science.gov (United States)

    Matsuzaki, Ryosuke; Todoroki, Akira

    2004-07-01

    In-service strain monitoring of tires of automobile is quite effective for improving the reliability of tires and Anti-lock Braking System (ABS). Since conventional strain gages have high stiffness and require lead wires, the conventional strain gages are cumbersome for the strain measurements of the tires. In a previous study, the authors proposed a new wireless strain monitoring method that adopts the tire itself as a sensor, with an oscillating circuit. This method is very simple and useful, but it requires a battery to activate the oscillating circuit. In the present study, the previous method for wireless tire monitoring is improved to produce a passive wireless sensor. A specimen made from a commercially available tire is connected to a tuning circuit comprising an inductance and a capacitance as a condenser. The capacitance change of tire causes change of the tuning frequency. This change of the tuned radio wave enables us to measure the applied strain of the specimen wirelessly, without any power supply from outside. This new passive wireless method is applied to a specimen and the static applied strain is measured. As a result, the method is experimentally shown to be effective as a passive wireless strain monitoring of tires.

  12. Optimization of protease production by an actinomycete Strain, PS ...

    African Journals Online (AJOL)

    Actinomycetes were isolated from the sediment samples of an estuarine shrimp pond located along the south east coast of India. During the investigation, a total of 28 strains of actinomycetes were isolated and examined for their protease activity. Among them, one strain PS-18A which was tentatively identified as ...

  13. From Measurements Errors to a New Strain Gauge Design

    DEFF Research Database (Denmark)

    Mikkelsen, Lars Pilgaard; Zike, Sanita; Salviato, Marco

    2015-01-01

    Significant over-prediction of the material stiffness in the order of 1-10% for polymer based composites has been experimentally observed and numerical determined when using strain gauges for strain measurements instead of non-contact methods such as digital image correlation or less stiff method...

  14. Potential application of Saccharomyces cerevisiae strains for the ...

    African Journals Online (AJOL)

    This paper aimed at evaluating the fermentation behavior of selected Saccharomyces cerevisiae strains in banana pulp and they were compared with commercial yeast (baker's yeast) for subsequent production of distilled spirits. Five types of microorganisms were used: Four yeast strains obtained from accredited ...

  15. Comparison of hormonally induced sex direction in two strains of ...

    African Journals Online (AJOL)

    There was no significant difference (P < 0.05) in percentage sex direction in the two strains. Nucleated oocytes could be distinguished clearly from oogonia in fish weighing 2 g and above. Gonadal development however, commenced earlier in the TR strain group with nucleated oocytes being observed from fish of 2 g ...

  16. Strain measurement on a compact nuclear reactor steam generator

    Energy Technology Data Exchange (ETDEWEB)

    Scaldaferri, Denis Henrique Bianchi; Gomes, Paulo de Tarso Vida; Mansur, Tanius Rodrigues, E-mail: dhbs@cdtn.b, E-mail: gomespt@cdtn.b, E-mail: tanius@cdtn.b [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil); Pozzo, Renato del, E-mail: delpozzo@ctmsp.mar.mil.b [Centro Tecnologico da Marinha em Sao Paulo (CTMSP), SP (Brazil); Mola, Jairo [Unitecnica Engenharia, Sao Paulo, SP (Brazil)

    2011-07-01

    This work presents the strain measurement procedures applied to a compact nuclear reactor steam generator, during a hydrostatic test, using strain gage technology. The test was divided in two steps: primary side test and secondary side test. In the primary side test twelve points for strain measurement using rectangular rosettes, three points (two external and one internal) for temperature measurement using special strain gages and one point for pressure measurement using a pressure transducer were monitored. In the secondary side test 18 points for strain measurement using rectangular rosettes, four points (two external and two internal) for temperature measurement using special strain gages and one point for pressure measurement using a pressure transducer were monitored. The measurement points on both internal and external pressurizer walls were established from pre-calculated stress distribution by means of numerical approach (finite elements modeling). Strain values using a quarter Wheatstone bridge circuit were obtained. Stress values, from experimental strain were determined, and to numerical calculation results were compared. (author)

  17. Effect of biosurfactant from two strains of Pseudomonas on ...

    African Journals Online (AJOL)

    Two Pseudomonas strains isolated from oil-contaminated soil which produce biosurfactant were studied. The biosurfactant containing broth formed stable emulsions with liquid light paraffin, cooking medium vegetable oil and toluene. The strains under study produce extra cellular biosurfactant in the culture media.

  18. Investigation of possible virulence factors in Candida strains isolated ...

    African Journals Online (AJOL)

    2014-06-16

    Jun 16, 2014 ... proteinase, and biofilm formation ability of the Candida strains isolated from the blood cultures. Materials and Methods: .... All tests were repeated 3 times for each strain. Statistical analysis was performed using SPSS (SPSS Inc., Chicago, IL, USA) version 11.5 software. The Chi‑square test was also done.

  19. Residual Strain in PCBs with Cu-Plated Holes

    Science.gov (United States)

    Rudajevova, A.; Dušek, K.

    2017-12-01

    The residual strain in pure printed circuit boards (PCBs) and PCBs with Cu-plated holes has been obtained by measurement of the temperature dependence of their dilatational characteristics in the x, y, and z directions up to 240°C. Shrinkage in all directions was observed for all samples of both materials in the first thermal cycle. No permanent length changes were observed in the second or subsequent thermal cycles. The residual strain was determined from the difference in relative elongation between the first and second thermal cycles. Relaxation of residual strain occurred only in the first thermal cycle, as a thermally activated process. The highest value of relaxed residual strain was found in the z direction for both materials. Relaxation of residual strain in the z direction of the pure PCB occurred only in the negative strain range, whereas relaxation of the PCB with Cu-plated holes occurred in both the positive and negative strain ranges. The relaxation of the positive strain in the PCB with Cu-plated holes in the z direction implies that this part of the PCB was under pressure during its preparation. This relaxation is a consequence of the high coefficient of thermal expansion of PCB laminate in this direction, which can also lead to cracks in Cu holes when the material is heated above the glass-transition temperature.

  20. Strain engineering of magnetic state in vacancy-doped phosphorene

    Energy Technology Data Exchange (ETDEWEB)

    Ren, Jie [Hunan Provincial Key Laboratory of Micro–Nano Energy Materials and Devices, Xiangtan University, Xiangtan 411105, Hunan (China); Zhang, Chunxiao, E-mail: zhangchunxiao@xtu.edu.cn [Hunan Provincial Key Laboratory of Micro–Nano Energy Materials and Devices, Xiangtan University, Xiangtan 411105, Hunan (China); Li, Jin [Hunan Provincial Key Laboratory of Micro–Nano Energy Materials and Devices, Xiangtan University, Xiangtan 411105, Hunan (China); Guo, Zhixin [Department of Physics, Xiangtan University, Xiangtan 411105, Hunan (China); Xiao, Huaping, E-mail: hpxiao@xtu.edu.cn [Hunan Provincial Key Laboratory of Micro–Nano Energy Materials and Devices, Xiangtan University, Xiangtan 411105, Hunan (China); Zhong, Jianxin [Hunan Provincial Key Laboratory of Micro–Nano Energy Materials and Devices, Xiangtan University, Xiangtan 411105, Hunan (China)

    2016-09-23

    Inducing and manipulating the magnetism in two-dimensional materials play an important role for the development of the next-generation spintronics. In this letter, the effects of the biaxial strain on magnetic properties of vacancy-doped phosphorene are investigated using first-principles calculation. We find although only SV956 doping induces magnetism for unstrained phosphorene, the biaxial strain induces nonzero magnetic moment for SV5566 and DVa doped phosphorene. The biaxial strain also modulates the magnetic state for SV956, SV5566 and DVa doped phosphorene. The local magnetic moment derives from the spin polarization of the dangling bonds near the vacancy. The biaxial strain influences the local bonding configuration near the vacancy which determines the presence of dangling bonds, and then modulates the magnetic state. Our findings promise the synergistic effect of strain engineering and vacancy decoration is an effective method for the operation of phosphorene-based spintronic devices. - Highlights: • Investigation of the magnetic moment of vacancy-doped phosphorene by DFT calculation. • The modulation of the magnetic moment by the biaxial strain. • The analysis of the bonding configuration with the biaxial strain. • The analysis of the electronic structures to explain the evolution of the magnetic moment. • The effects of the biaxial strain on the band gap and doping levels.

  1. Emotional distress and strain in relatives of patients with severe ...

    African Journals Online (AJOL)

    The levels of emotional distress and strain were examined in two groups of relatives of psychiatric patients using standard instruments. The dementia group had more GHQ - 30 cases than the schizophrenic group. Even though the schizophrenic relatives had higher distress and strain scores than the dementia relatives, ...

  2. Genomic Characterization of Campylobacter jejuni strain M1

    DEFF Research Database (Denmark)

    Friis, Carsten; Wassenaar, Gertrude Maria; Javed, Muhammad A.

    2010-01-01

    Campylobacter jejuni strain M1 (laboratory designation 99/308) is a rarely documented case of direct transmission of C. jejuni from chicken to a person, resulting in enteritis. We have sequenced the genome of C. jejuni strain M1, and compared this to 12 other C. jejuni sequenced genomes currently...

  3. Inoculation effects of two South African cyanobacteria strains on ...

    African Journals Online (AJOL)

    Two South African cyanobacteria strains (coded 3g and 7e) of the genus Nostoc were evaluated for improvement of the aggregate stability of a silty loam soil with low organic C content and compared with Nostoc strain 9v isolated from a Tanzanian soil. The soil was either cropped with maize or non-cropped and inoculated ...

  4. From Measurements Errors to a New Strain Gauge Design

    DEFF Research Database (Denmark)

    Mikkelsen, Lars Pilgaard; Zike, Sanita; Salviato, Marco

    2015-01-01

    Significant over-prediction of the material stiffness in the order of 1-10% for polymer based composites has been experimentally observed and numerical determined when using strain gauges for strain measurements instead of non-contact methods such as digital image correlation or less stiff methods...... decreased using an enhanced grid design of the measuring grid....

  5. Isolation and molecular genetic characterization of a yeast strain ...

    African Journals Online (AJOL)

    STORAGESEVER

    2009-05-18

    May 18, 2009 ... optimal in situ bioremediation strategies. In the current study, three yeast strains were isolated from oil- contaminated soil by enrichment technique in mineral basal salts (MBS) medium supplemented with phenanthrene as a sole carbon source. Out of these, strain AH70 was selected for PAHs degradation,.

  6. Job strain and the risk of depression: is reporting biased?

    DEFF Research Database (Denmark)

    Kolstad, Henrik; Hansen, Åse Marie; Kærgaard, Anette

    2011-01-01

    It is unknown whether the relation between job strain and depression reflects causal characteristics of the working environment or reporting bias. The authors investigated reporting bias by analyzing individual versus work-unit measures of job strain and the risk of depressive symptoms (n = 287) ...

  7. Complete Genome Sequence of Prevotella intermedia Strain 17-2

    OpenAIRE

    Nambu, Takayuki; Yamane, Kazuyoshi; Maruyama, Hugo; Mashimo, Chiho; Yamanaka, Takeshi

    2015-01-01

    Prevotella intermedia, a Gram-negative black-pigmented anaerobic rod, is frequently isolated from not only periodontal pockets but also purulent infections. We report here the complete genome sequence of P.?intermedia strain 17-2, which is a non-exopolysaccharide-producing variant obtained from exopolysaccharide (EPS)-producing P.?intermedia strain 17 stock culture.

  8. Physical Strain: A New Perspective on Walking in Cerebral Palsy

    NARCIS (Netherlands)

    Balemans, Astrid C.; Bolster, Eline A.; Brehm, Merel-Anne; Dallmeijer, Annet J.

    2017-01-01

    Objectives: To describe (1) physical strain of walking, (2) the proportion of participants walking above the anaerobic threshold, and (3) 4 phenotypes of physical strain of walking on the basis of deviations in aerobic capacity and walking energy cost (EC) in children and adolescents with cerebral

  9. Strain-induced properties of epitaxial VOx thin films

    NARCIS (Netherlands)

    Rata, AD; Hibma, T

    We have grown VOx thin films on different substrates in order to investigate the influence of epitaxial strain on the transport properties. We found that the electric conductivity is much larger for films grown under compressive strain on SrTiO3 substrates, as compared to bulk material and VOx films

  10. Selection and evaluation of Rhizobial strains of Vigna radiata L ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-10-20

    Oct 20, 2008 ... Selection and evaluation of Rhizobial strains of Vigna radiata L. beneficial to ... This study aimed to select suitable strains that can be used as inoculants to enhance legume production and simultaneously reduce the use of ... contributor to natural or biological N2 fixation and allows legumes to grow in the ...

  11. The shape of a strain-based failure assessment diagram

    International Nuclear Information System (INIS)

    Budden, P.J.; Ainsworth, R.A.

    2012-01-01

    There have been a number of recent developments of strain-based fracture assessment approaches, including proposals by Budden [Engng Frac Mech 2006;73:537–52] for a strain-based failure assessment diagram (FAD) related to the conventional stress-based FAD. However, recent comparisons with finite element (FE) data have shown that this proposed strain-based FAD can be non-conservative in some cases, particularly for deeper cracks and materials with little strain-hardening capacity. Therefore, this paper re-examines the shape of the strain-based FAD, guided by these FE analyses and some theoretical analysis. On this basis, modified proposals for the shape of the strain-based FAD are given, including simplified and more detailed options in line with the options available for stress-based FADs in existing fitness-for-service procedures. The proposals are then illustrated by a worked example and by comparison with FE data, which demonstrate that the new proposals are generally conservative. - Highlights: ► The strain-based failure assessment diagram approach to fracture is developed. ► The new approach modifies earlier proposals by Budden. ► A new generic Option 1 strain-based failure assessment diagram is proposed. ► Validation based on finite element J data for plates and cylinders is presented. ► The new approach is generally conservative compared with the finite element data.

  12. Formation of biofilm by strains of Listeria monocytogenes isolated ...

    African Journals Online (AJOL)

    Quantification of biofilm formation by 40 Listeria monocytogenes strains from wara soft cheese and its processing environment was assessed on glass vials surfaces. Attachement to glass surface was quantified using a crystal violet binding assay. All the 40 strains produced biofilms after 48 and 72 h incubation at 37oC.

  13. Auxetic Mechanical Metamaterials to Enhance Sensitivity of Stretchable Strain Sensors.

    Science.gov (United States)

    Jiang, Ying; Liu, Zhiyuan; Matsuhisa, Naoji; Qi, Dianpeng; Leow, Wan Ru; Yang, Hui; Yu, Jiancan; Chen, Geng; Liu, Yaqing; Wan, Changjin; Liu, Zhuangjian; Chen, Xiaodong

    2018-03-01

    Stretchable strain sensors play a pivotal role in wearable devices, soft robotics, and Internet-of-Things, yet these viable applications, which require subtle strain detection under various strain, are often limited by low sensitivity. This inadequate sensitivity stems from the Poisson effect in conventional strain sensors, where stretched elastomer substrates expand in the longitudinal direction but compress transversely. In stretchable strain sensors, expansion separates the active materials and contributes to the sensitivity, while Poisson compression squeezes active materials together, and thus intrinsically limits the sensitivity. Alternatively, auxetic mechanical metamaterials undergo 2D expansion in both directions, due to their negative structural Poisson's ratio. Herein, it is demonstrated that such auxetic metamaterials can be incorporated into stretchable strain sensors to significantly enhance the sensitivity. Compared to conventional sensors, the sensitivity is greatly elevated with a 24-fold improvement. This sensitivity enhancement is due to the synergistic effect of reduced structural Poisson's ratio and strain concentration. Furthermore, microcracks are elongated as an underlying mechanism, verified by both experiments and numerical simulations. This strategy of employing auxetic metamaterials can be further applied to other stretchable strain sensors with different constituent materials. Moreover, it paves the way for utilizing mechanical metamaterials into a broader library of stretchable electronics. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Investigation of stress–strain models for confined high strength ...

    Indian Academy of Sciences (India)

    The ascending branch of stress–strain curves depended on the ratio of confinement reinforcement was similar to the modified Kent–Park model and the descending branch similar to the Nagashima model. Keywords. High strength concrete; confined concrete; stress–strain models; ductility toughness. 1. Introduction.

  15. Comparison of historic and contemporary strains of Senecavirus A

    Science.gov (United States)

    Objective One hypothesis for the sudden increase in SVA cases in the United States was that contemporary strains were more pathogenic than historical strains. Our objective was to study disease progression of historical and contemporary SVA isolates in growing pigs. Materials and Methods Commercial ...

  16. An embeddable optical strain gauge based on a buckled beam

    Science.gov (United States)

    Du, Yang; Chen, Yizheng; Zhu, Chen; Zhuang, Yiyang; Huang, Jie

    2017-11-01

    We report, for the first time, a low cost, compact, and novel mechanically designed extrinsic Fabry-Perot interferometer (EFPI)-based optical fiber sensor with a strain amplification mechanism for strain measurement. The fundamental design principle includes a buckled beam with a coated gold layer, mounted on two grips. A Fabry-Perot cavity is produced between the buckled beam and the endface of a single mode fiber (SMF). A ceramic ferrule is applied for supporting and orienting the SMF. The principal sensor elements are packaged and protected by two designed metal shells. The midpoint of the buckled beam will experience a deflection vertically when the beam is subjected to a horizontally/axially compressive displacement. It has been found that the vertical deflection of the beam at midpoint can be 6-17 times larger than the horizontal/axial displacement, which forms the basis of a strain amplification mechanism. The user-configurable buckling beam geometry-based strain amplification mechanism enables the strain sensor to achieve a wide range of strain measurement sensitivities. The designed EFPI was used to monitor shrinkage of a square brick of mortar. The strain was measured during the drying/curing stage. We envision that it could be a good strain sensor to be embedded in civil materials/structures under a harsh environment for a prolonged period of time.

  17. Comparison of the adhesion ability of Candida albicans strains to ...

    African Journals Online (AJOL)

    The purpose of the present study is to investigate the ability of oral Candida albicans strains to adhere to Caco-2 and Hep-2 epithelial cells, to produce slime using Congo red and Safranin methods and to form a biofilm on polymethylmethacrylate. A total of 20 C. albicans strains were tested in the present work. The biofilm ...

  18. Job strain as a risk factor for coronary heart disease

    DEFF Research Database (Denmark)

    Kivimäki, Mika; Nyberg, Solja T; Batty, G David

    2012-01-01

    Published work assessing psychosocial stress (job strain) as a risk factor for coronary heart disease is inconsistent and subject to publication bias and reverse causation bias. We analysed the relation between job strain and coronary heart disease with a meta-analysis of published and unpublishe...

  19. Antimicrobial Resistance of Staphylococcal Strains Isolated from Various Pathological Products

    Directory of Open Access Journals (Sweden)

    Laura-Mihaela SIMON

    2010-12-01

    Full Text Available Background: The optimal choice of antimicrobial therapy is an important problem in hospital environment in which the selection of resistant and virulent strains easy occurs. S. aureus and especially MRSA(methicillin-resistant S. aureus creates difficulties in both treatment and prevention of nosocomial infections. Aim: The purpose of this study is to determine the sensitivity and the resistance to chemotherapy of staphylococci strains isolated from various pathological products. Material and Method: We identified Staphylococccus species after morphological appearance, culture properties, the production of coagulase, hemolisines and the enzyme activity. The susceptibility tests were performed on Mueller-Hinton medium according to CLSI (Clinical and Laboratory Standards Institute. Results: The strains were: MSSA (methicillin-susceptible S. aureus (74%, MRSA (8%, MLS B (macrolides, lincosamides and type B streptogramines resistance (12% and MRSA and MLS B (6%. MRSA strains were more frequently isolated from sputum. MRSA associated with the MLS B strains were more frequently isolated from pus. MLS B strains were more frequently isolated from sputum and throat secretions. All S. aureus strains were susceptible to vancomycin and teicoplanin. Conclusions: All staphylococcal infections require resistance testing before treatment. MLS B shows a high prevalence among strains of S. aureus. The association between MLS B and MRSA remains a major problem in Romania.

  20. Antibiotics susceptibility pattern of Escherichia coli strains isolated ...

    African Journals Online (AJOL)

    This study was carried out to determine the susceptibility of E coli strains isolated from broiler and layer chicken with colisepticemia to antibiotics used in poultry industry in the country. A total of fifty seven E. coli strains isolated from 43 broiler and14 layer farms with colisepticemia in Khartoum and Gezera state were ...

  1. Evaluation of antifungal activity from Bacillus strains against ...

    African Journals Online (AJOL)

    In this study, 30 bacterial strains isolated from marine biofilms were screened for their antifungal activity against Rhizoctonia solani by dual culture assay. Two bacterial strains, Bacillus subtilis and Bacillus cereus, showed a clear antagonism against R. solani on potato dextrose agar (PDA) medium. The antagonistic activity ...

  2. Antagonistic activity of selected strains of Bacillus thuringiensis ...

    African Journals Online (AJOL)

    The aim of this work was to determine, in vitro, the antagonistic effectiveness of 60 strains of Bacillus thuringiensis against damping-off and root and stem rot caused by Rhizoctonia solani. The strains were obtained from the International Collection of Entomopathogenic Bacillus at the FCB-UANL. During the in vitro dual ...

  3. MM98.36 Strain Paths in Extrusion

    DEFF Research Database (Denmark)

    Lindegren, Maria; Wiwe, Birgitte; Wanheim, Tarras

    1998-01-01

    The extrusion process has been investigated for different geometries, in order to study the strain path of different material elements during their movements through the plastic zone. This is done by using the FEM code DEFORM and physical simulation with wax togehter with the coefficient method. ....... Calculations of strain paths have also been performed by ABAQUS....

  4. Selection of inoculum size and Saccharomyces cerevisiae strain for ...

    African Journals Online (AJOL)

    Selection of inoculum size and Saccharomyces cerevisiae strain for ethanol production in simultaneous saccharification and fermentation (SSF) of sugar cane ... (0.4, 4.0 and 8.0 g/L) and two strains of S. cerevisiae (UFPEDA 1238 and UFPEDA 1334) were used to ferment a culture medium containing glucose as the carbon ...

  5. Fatty acid profiling to characterize California strains of Xylella fastidiosa

    Science.gov (United States)

    Different strains of Xylella fastidiosa cause diseases such as Pierce’s disease of grapevine, citrus variegated chlorosis, and bacterial leaf scorch of hardwoods. However, more research is needed to better define subspecies and strains of X. fastidiosa to improve both regulations concerning this bac...

  6. Antimicrobial resistance of non-clinical Escherichia coli strains from ...

    African Journals Online (AJOL)

    This study was carried out to determine resistance profiles of Escherichia coli strains isolated from clinically healthy chickens in Nsukka, southeast Nigeria. A total of 324 E. coli strains isolated from cloaca swabs from 390 chickens were tested against 16 antimicrobial agents using the disc diffusion method. The antibiotics ...

  7. Conduction gap in graphene strain junctions: direction dependence

    International Nuclear Information System (INIS)

    Nguyen, M Chung; Nguyen, V Hung; Dollfus, P; Nguyen, Huy-Viet

    2014-01-01

    It has been shown in a recent study (Nguyen et al 2014 Nanotechnology 25 165201) that unstrained/strained graphene junctions are promising candidates to improve the performance of graphene transistors which is usually hindered by the gapless nature of graphene. Although the energy bandgap of strained graphene still remains zero, the shift of Dirac points in the k-space due to strain-induced deformation of graphene lattice can lead to the appearance of a finite conduction gap of several hundred meV in strained junctions with a strain of only a few per cent. However, since it depends essentially on the magnitude of the Dirac point shift, this conduction gap strongly depends on the direction of applied strain and the transport direction. In this work, a systematic study of conduction-gap properties with respect to these quantities is presented and the results are carefully analyzed. Our study provides useful information for further investigations to exploit graphene-strained junctions in electronic applications and strain sensors. (paper)

  8. Equivalence of quality control strains of microorganisms used in the compendial microbiological tests: are national culture collection strains identical?

    Science.gov (United States)

    Cundell, Anthony M; Chatellier, Sonia; Schumann, Peter; Lilischkis, Richard

    2010-01-01

    The pharmacopoeias list a number of microorganisms to be used in the compendial microbiological tests for confirming the growth-promoting, indicative, and inhibitory properties of the media and demonstrating the suitability of the test for a specific test article. Major national culture collections are specified as the sources for these test strains based on their history of deposition and maintenance and use in the compendial tests. Using these microorganisms, it has long been assumed that these strains are interchangeable and that sourcing the strains from different culture collections has no impact on the result of the media quality control and method qualification tests. In order to evaluate whether this assumption is correct and to add more certainty to the procedures, we investigated whether there are detectable differences among isolates of the same strain sourced from different culture collections. Using various phenotypic and genotypic identification and strain typing methods, nine major pharmacopoeial species were analyzed. As expected, most of the species showed very uniform patterns across the isolates, indicating that the strains were indeed identical. Surprisingly, the strains of Salmonella enterica subsp. enterica serotype abony showed distinct differences at both the genotypic and the phenotypic level, suggesting that the strains sourced from the different culture collections were not identical strains, or that they have undergone detectable genetic shift from the time they were derived from the original depositor. Irrespective of the level of genotypic or phenotypic homology identified here, there are no practical consequences on their performance in compendial assays. It is concluded that the compendial strains investigated in this study are indeed equivalent and will perform identically in compendial tests, making it safe to base pharmaceutical quality control procedures on the strains sourced from any of the recognized national culture

  9. Whole genome sequence of Treponema pallidum ssp. pallidum, strain Mexico A, suggests recombination between yaws and syphilis strains.

    Directory of Open Access Journals (Sweden)

    Helena Pětrošová

    Full Text Available Treponema pallidum ssp. pallidum (TPA, the causative agent of syphilis, and Treponema pallidum ssp. pertenue (TPE, the causative agent of yaws, are closely related spirochetes causing diseases with distinct clinical manifestations. The TPA Mexico A strain was isolated in 1953 from male, with primary syphilis, living in Mexico. Attempts to cultivate TPA Mexico A strain under in vitro conditions have revealed lower growth potential compared to other tested TPA strains.The complete genome sequence of the TPA Mexico A strain was determined using the Illumina sequencing technique. The genome sequence assembly was verified using the whole genome fingerprinting technique and the final sequence was annotated. The genome size of the Mexico A strain was determined to be 1,140,038 bp with 1,035 predicted ORFs. The Mexico A genome sequence was compared to the whole genome sequences of three TPA (Nichols, SS14 and Chicago and three TPE (CDC-2, Samoa D and Gauthier strains. No large rearrangements in the Mexico A genome were found and the identified nucleotide changes occurred most frequently in genes encoding putative virulence factors. Nevertheless, the genome of the Mexico A strain, revealed two genes (TPAMA_0326 (tp92 and TPAMA_0488 (mcp2-1 which combine TPA- and TPE- specific nucleotide sequences. Both genes were found to be under positive selection within TPA strains and also between TPA and TPE strains.The observed mosaic character of the TPAMA_0326 and TPAMA_0488 loci is likely a result of inter-strain recombination between TPA and TPE strains during simultaneous infection of a single host suggesting horizontal gene transfer between treponemal subspecies.

  10. Novel hepatitis B virus strain developing due to recombination between genotypes H and B strains isolated from a Japanese patient.

    Science.gov (United States)

    Uchida, Yoshihito; Kouyama, Jun-Ichi; Naiki, Kayoko; Sugawara, Kayoko; Inao, Mie; Nakayama, Nobuaki; Mochida, Satoshi

    2014-10-01

    In Japan, genotypes B and C are the predominant genotypes isolated from patients with chronic hepatitis B, while genotype A predominates in patients with acute hepatitis B. Globalization, however, appears to have changed the distribution of the hepatitis B virus (HBV) genotypes. Thus, the viral characteristics of HBV genotypes other than genotypes A, B and C were examined. Screening of genotypes was performed by enzyme immunoassay and/or polymerase chain reaction INVADER method in 222 patients with HBV. The full-length nucleotide sequences of unusual strains were compared to those in the database, followed by construction of a phylogenetic tree. Unusual HBV strains were isolated from two patients: a 27-year-old Japanese bisexual man with acute hepatitis B with HIV co-infection and a 52-year-old Japanese man with chronic hepatitis B. The former strain was classified as genotype H, showing an overall identity of 99.8% to the Thailand strain (EU498228), while the nucleotide sequence of the latter strain showed similarity to the genotype B strains isolated in Malaysia (JQ027316) and Indonesia (JQ429079) between DR2 and DR1 in the X region, with identities of 96.9%. However, this strain was classified as genotype H by full-length sequence analysis, and the sequence between nt2023 and nt2262 showed no similarity to that in any previously reported strains. HBV strains showing recombination between genotype B and H strains were found even in chronic hepatitis patients in Japan. Globalization may yield HBV strains of possible novel genotypes containing novel nucleotide sequences in the precore/core region. © 2013 The Japan Society of Hepatology.

  11. Modulation of virulence and antibiotic susceptibility of enteropathogenic Escherichia coli strains by Enterococcus faecium probiotic strain culture fractions.

    Science.gov (United States)

    Ditu, Lia-Mara; Chifiriuc, Mariana Carmen; Bezirtzoglou, Eugenia; Voltsi, Chrysa; Bleotu, Coralia; Pelinescu, Diana; Mihaescu, Grigore; Lazar, Veronica

    2011-12-01

    The increasing rate of antimicrobial resistance drastically reduced the efficiency of conventional antibiotics and led to the reconsideration of the interspecies interactions in influencing bacterial virulence and response to therapy. The aim of the study was the investigation of the influence of the soluble and cellular fractions of Enterococcus (E.) faecium CMGB16 probiotic culture on the virulence and antibiotic resistance markers expression in clinical enteropathogenic Escherichia (E.) coli strains. The 7 clinical enteropathogenic E. coli strains, one standard E. coli ATCC 25,922 and one Bacillus (B.) cereus strains were cultivated in nutrient broth, aerobically at 37 °C, for 24 h. The E. faecium CMGB16 probiotic strain was cultivated in anaerobic conditions, at 37 °C in MRS (Man Rogosa Sharpe) broth, and co-cultivated with two pathogenic strains (B. cereus and E. coli O28) culture fractions (supernatant, washed sediment and heat-inactivated culture) for 6 h, at 37 °C. After co-cultivation, the soluble and cellular fractions of the probiotic strain cultivated in the presence of two pathogenic strains were separated by centrifugation (6000 rpm, 10 min), heat-inactivated (15 min, 100 °C) and co-cultivated with the clinical enteropathogenic E. coli strains in McConkey broth, for 24 h, at 37 °C, in order to investigate the influence of the probiotic fractions on the adherence capacity and antibiotic susceptibility. All tested probiotic combinations influenced the adherence pattern of E. coli tested strains. The enteropathogenic E. coli strains susceptibility to aminoglycosides, beta-lactams and quinolones was increased by all probiotic combinations and decreased for amoxicillin-clavulanic acid. This study demonstrates that the plurifactorial anti-infective action of probiotics is also due to the modulation of virulence factors and antibiotic susceptibility expression in E. coli pathogenic strains. Copyright © 2011 Elsevier Ltd. All rights reserved.

  12. Experimental three dimensional strain estimation from ultrasonic sectorial data.

    Science.gov (United States)

    Said, G; Basset, O; Mari, J M; Cachard, C; Brusseau, E; Vray, D

    2006-12-22

    Most of the studies devoted to elastography are focused on the estimation of the axial component of the strain. However when subjected to any load, whatever the direction, soft biological media deform in the three spatial dimensions. The aim of our work is to build a three dimensional strain mapping from data acquired with a 3D clinical sectorial probe. The estimation of radial strain is based on the estimation of local scaling factors. A method of cross-correlation of interpolated signals between adjacent radiofrequency lines was used to estimate the angular displacement and strain. For the sectorial strain estimation, the same displacement estimation technique has been implemented. The method has been tested on experimental data acquired on calibrated phantoms and compared to simulation.

  13. Characterization of electronic structure of periodically strained graphene

    Energy Technology Data Exchange (ETDEWEB)

    Aslani, Marjan; Garner, C. Michael, E-mail: mcgarner@stanford.edu; Nishi, Yoshio [Department of Electrical Engineering, Stanford University, Stanford, California 94305 (United States); Kumar, Suhas [Department of Electrical Engineering, Stanford University, Stanford, California 94305 (United States); Hewlett-Packard Laboratories, 1501 Page Mill Road, Palo Alto, California 94304 (United States); Nordlund, Dennis [Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, California 94025 (United States); Pianetta, Piero [Department of Electrical Engineering, Stanford University, Stanford, California 94305 (United States); Stanford Synchrotron Radiation Lightsource, SLAC National Accelerator Laboratory, 2575 Sand Hill Road, Menlo Park, California 94025 (United States)

    2015-11-02

    We induced periodic biaxial tensile strain in polycrystalline graphene by wrapping it over a substrate with repeating pillar-like structures with a periodicity of 600 nm. Using Raman spectroscopy, we determined to have introduced biaxial strains in graphene in the range of 0.4% to 0.7%. Its band structure was characterized using photoemission from valance bands, shifts in the secondary electron emission, and x-ray absorption from the carbon 1s levels to the unoccupied graphene conduction bands. It was observed that relative to unstrained graphene, strained graphene had a higher work function and higher density of states in the valence and conduction bands. We measured the conductivity of the strained and unstrained graphene in response to a gate voltage and correlated the changes in their behavior to the changes in the electronic structure. From these sets of data, we propose a simple band diagram representing graphene with periodic biaxial strain.

  14. Optical Fiber Strain Instrumentation for High Temperature Aerospace Structural Monitoring

    Science.gov (United States)

    Wang, A.

    2002-01-01

    The objective of the program is the development and laboratory demonstration of sensors based on silica optical fibers for measurement of high temperature strain for aerospace materials evaluations. A complete fiber strain sensor system based on white-light interferometry was designed and implemented. An experiment set-up was constructed to permit testing of strain measurement up to 850 C. The strain is created by bending an alumina cantilever beam to which is the fiber sensor is attached. The strain calibration is provided by the application of known beam deflections. To ensure the high temperature operation capability of the sensor, gold-coated single-mode fiber is used. Moreover, a new method of sensor surface attachment which permits accurate sensor gage length determination is also developed. Excellent results were obtained at temperatures up to 800-850 C.

  15. Strain engineering of WS2, WSe2, and WTe2

    KAUST Repository

    Amin, Bin

    2014-01-01

    We perform first-principles calculations to investigate the structural, electronic, and vibrational properties of WS2, WSe2, and WTe2 monolayers, taking into account the strong spin orbit coupling. A transition from a direct to an indirect band gap is achieved for compressive strain of 1% for WS2, 1.5% for WSe2, and 2% for WTe 2, while the nature of the band gap remains direct in the case of tensile strain. The size of the band gap passes through a maximum under compressive strain and decreases monotonically under tensile strain. A strong spin splitting is found for the valence band in all three compounds, which is further enhanced by tensile strain. The mobility of the electrons grows along the series WS2 < WSe2 < WTe2. This journal is © the Partner Organisations 2014.

  16. Consumer perceptions of strain differences in Cannabis aroma.

    Science.gov (United States)

    Gilbert, Avery N; DiVerdi, Joseph A

    2018-01-01

    The smell of marijuana (Cannabis sativa L.) is of interest to users, growers, plant breeders, law enforcement and, increasingly, to state-licensed retail businesses. The numerous varieties and strains of Cannabis produce strikingly different scents but to date there have been few, if any, attempts to quantify these olfactory profiles directly. Using standard sensory evaluation techniques with untrained consumers we have validated a preliminary olfactory lexicon for dried cannabis flower, and characterized the aroma profile of eleven strains sold in the legal recreational market in Colorado. We show that consumers perceive differences among strains, that the strains form distinct clusters based on odor similarity, and that strain aroma profiles are linked to perceptions of potency, price, and smoking interest.

  17. A study of V. cholerae strains isolated in Bombay.

    Directory of Open Access Journals (Sweden)

    Saraswathi K

    1990-07-01

    Full Text Available Of 935 faecal samples studied over a period of one year, V. cholerae 01 was isolated from 102 samples (10.9%. All the strains were found to be E1 Tor Ogawa. The strains belonging to the phage types 2 and 4 were encountered in our study, type 2 being the highest (76.5%. The sensitivity pattern of all strains to the commonly used antibiotics was determined. Strains sensitive to gentamicin (92.2%, nalidixic acid (85.3%, kanamycin (83.3%, cotrimoxazole (80.4% and chloramphenicol (75.5% were observed. Out of the total, 36.3%, 29.4% and 28.4% of V. cholerae strains were found to be resistant to ampicillin, streptomycin and tetracycline respectively. V. cholerae was isolated throughout the year indicating the endemicity of cholera in Bombay.

  18. NEW PRODUCER STRAINS OF BIOBUTANOL. І. ISOLATION AND IDENTIFICATION

    Directory of Open Access Journals (Sweden)

    O. A. Tigunova

    2013-02-01

    Full Text Available Getting new, more productive strains of microorganisms that produce butanol is a topical problem. Studing of morphological and physiological characteristics of the isolated strains, improvement of their cultivation conditions, optimization of biobutanol synthesis gives the possibility to organize a cost-effective butanol production technology. The aim of this work was searching new butanol and butyric acid producer strains, their identification and studying the main steps of the selective strains biosynthesis. The objects of this study were microorganisms that had allocated from soils and sludges samples of Kiev’s lakes. Obtained cultures have been screened. Three strains were obtained as promising and identified as C. acetobutylicum, C. tyrobutylicum, C. butylicum. Selective medium have been developed and modified for the microorganisms. Producer’s features were investigated in order to maximize the accumulation of target metabolites.

  19. Ultrasensitive, Stretchable Strain Sensors Based on Fragmented Carbon Nanotube Papers

    KAUST Repository

    Zhou, Jian

    2017-01-17

    The development of strain sensors featuring both ultra high sensitivity and high stretchability is still a challenge. We demonstrate that strain sensors based on fragmented single-walled carbon nanotube (SWCNT) paper embedded in poly(dimethylsiloxane) (PDMS) can sustain their sensitivity even at very high strain levels (with a gauge factor of over 10(7) at 50% strain). This record sensitivity is ascribed to the low initial electrical resistance (5-28 Omega) of the SWCNT paper and the wide change in resistance (up to 10(6) Omega) governed by the percolated network of SWCNT in the cracked region. The sensor response remains nearly unchanged after 10 000 strain cycles at 20% proving the robustness of this technology. This fragmentation based sensing system brings opportunities to engineer highly sensitive stretchable sensors.

  20. Simultaneous 2D Strain Sensing Using Polymer Planar Bragg Gratings

    Science.gov (United States)

    Rosenberger, Manuel; Eisenbeil, Waltraud; Schmauss, Bernhard; Hellmann, Ralf

    2015-01-01

    We demonstrate the application of polymer planar Bragg gratings for multi-axial strain sensing and particularly highlight simultaneous 2D strain measurement. A polymer planar Bragg grating (PPBG) fabricated with a single writing step in bulk polymethylmethacrylate is used for measuring both tensile and compressive strain at various angles. It is shown that the sensitivity of the PPBG strongly depends on the angle between the optical waveguide into which the grating is inscribed and the direction along which the mechanical load is applied. Additionally, a 2D PPBG fabricated by writing two Bragg gratings angularly displaced from each other into a single polymer platelet is bonded to a stainless steel plate. The two reflected wavelengths exhibit different sensitivities while tested toward tensile and compressive strain. These characteristics make 2D PPBG suitable for measuring multi-axial tensile and compressive strain. PMID:25686313

  1. A Canadian perspective on engineering strain measurements by neutron diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Holden, T.M., E-mail: holdent@magma.ca [Northern Stress Technologies, Deep River, ON (Canada)

    2010-10-15

    The origins of the method, which relies on the high penetration of thermal neutrons through most industrial materials, in the late 1970s and 1980s and its development up to the present time are described. The basic steps from the measurement of lattice spacing to the calculation of stress are outlined. The length scales on which strains and stresses are manifest have a bearing on the interpretation of strain in terms of stress. A number of examples of macroscopic strain or stress fields are described where these scale considerations, as well as gradients of solute concentration that affect the interpretation of strain, matter. The strains on the length scale of the grains provide useful information about the elasticity and plasticity of materials, particularly in materials of lower symmetry than cubic. Finally, a number of future directions are suggested, which are enabled by the new intense neutron sources and improved equipment built in the last few years. (author)

  2. Construction of acetoin high-producing Bacillus subtilis strain

    Directory of Open Access Journals (Sweden)

    Yanjun Tian

    2016-07-01

    Full Text Available This paper describes the construction and selection of a high-producing mutant, Bacillus subtilis HB-32, with enhanced acetoin yield and productivity. The mutant was obtained by the protoplast fusion of a Bacillus subtilis mutant TH-49 (Val− producing acetoin and Bacillus licheniformis AD-30 producing α-acetolactate decarboxylase, with the fusogen polyethylene glycol and after the regeneration and selection, etc. of the fusant. The acetoin production reached 49.64 g/L, which is an increase of 61.8% compared to that of B. subtilis strain TH-49. Random amplified polymorphic DNA analysis was performed to determine the mutagenic and protoplast fusion effects and the genomic changes in the acetoin high-producing strain compared to the parent strains at the molecular level. The constructed strain was shown to be promising for large-scale acetoin production. Future studies should focus on the application of the mutant strain in practice.

  3. Genetic variations among Mycoplasma bovis strains isolated from Danish cattle

    DEFF Research Database (Denmark)

    Kusiluka, L.J.M.; Kokotovic, Branko; Ojeniyi, B.

    2000-01-01

    strain of M. bovis (PG45(T)) were assayed for variations in the BglII and MfeI restriction sites in the chromosomal DNA by using the amplified fragment length polymorphism (AFLP) fingerprinting technique. The obtained genomic fingerprints consisted of 62-68 AFLP fragments in the size range of 50-500 bp....... Among the analyzed strains, 18 different AFLP profiles were detected. The similarity between individual fingerprints, calculated by Dice similarity coefficient, ranged from 0.9 to 1.0. Twenty-five strains, including 23 which were isolated during two outbreaks of M. bovis-induced mastitis which occurred...... homogeneity of Danish strains of M. bovis that were probably epidemiologically related and which have remained stable for a considerable length of time. Furthermore; this study has demonstrated that AFLP can be used for genomic fingerprinting and discrimination of M. bovis strains....

  4. On the origins of strain inhomogeneity in amorphous materials.

    Science.gov (United States)

    Lunt, Alexander J G; Chater, Philip; Korsunsky, Alexander M

    2018-01-25

    Strain is a crucial measure of materials deformation for evaluating and predicting the mechanical response, strength, and fracture. The spatial resolution attainable by the modern real and reciprocal space techniques continues to improve, alongside the ability to carry out atomistic simulations. This is offering new insights into the very concept of strain. In crystalline materials, the presence of well-defined, stable atomic planes allows defining strain as the relative change in the interplanar spacing. However, the presence of disorder, e.g. locally around defects such as dislocation cores, and particularly the pervasive atomic disorder in amorphous materials challenge existing paradigms: disorder prevents a reference configuration being defined, and allows strain to be accommodated in a different manner to crystalline materials. As an illustration, using experimental pair distribution function analysis in combination with Molecular Dynamic (MD) simulations, we highlight the importance of bond angle change vs bond stretching for strain accommodation in amorphous systems.

  5. Undergraduate Prescription Stimulant Misuse: The Impact of Academic Strain.

    Science.gov (United States)

    Norman, Lauren; Ford, Jason

    2018-01-09

    This study investigated the misuse of prescription stimulants among undergraduates for academic purposes. This research is important as existing literature has indicated that this type of prescription drug misuse is a growing concern, especially among college undergraduates aged 18-25. This study focused on how various types of academic strain (i.e., academic strain, grade strain, and academic impediments) influenced the misuse of prescription stimulants. Roughly 900 quantitative surveys were collected at a large Southeastern university in May 2014 that specifically addressed prescription stimulant misuse. Results from regression analyses indicated that college students are at an increased likelihood of misusing prescription stimulants for academic purposes if they experienced academic impediments and/or grade strain during the past academic year. Conclusions/Importance: It is necessary to identify how academic strain impacts undergraduates' likelihood of engaging in the misuse of prescription stimulants as this information may aid in college based educational and prevention programs.

  6. Dynamic strain measurements in a sliding microstructured contact

    International Nuclear Information System (INIS)

    Bennewitz, Roland; David, Jonathan; Lannoy, Charles-Francois de; Drevniok, Benedict; Hubbard-Davis, Paris; Miura, Takashi; Trichtchenko, Olga

    2008-01-01

    A novel experiment is described which measures the tangential strain development across the contact between a PDMS (polydimethylsiloxane) block and a glass surface during the initial stages of sliding. The surface of the PDMS block has been microfabricated to take the form of a regular array of pyramidal tips at 20 μm separation. Tangential strain is measured by means of light scattering from the interface between the block and surface. Three phases are observed in all experiments: initial shear deformation of the whole PDMS block, a pre-sliding tangential compression of the tip array with stepwise increase of the compressive strain, and sliding in stick-slip movements as revealed by periodic variation of the strain. The stick-slip sliding between the regular tip array and the randomly rough counter surface always takes on the periodicity of the tip array. The fast slip can cause either a sudden increase or a sudden decrease in compressive strain

  7. Parallel Microcracks-based Ultrasensitive and Highly Stretchable Strain Sensors.

    Science.gov (United States)

    Amjadi, Morteza; Turan, Mehmet; Clementson, Cameron P; Sitti, Metin

    2016-03-02

    There is an increasing demand for flexible, skin-attachable, and wearable strain sensors due to their various potential applications. However, achieving strain sensors with both high sensitivity and high stretchability is still a grand challenge. Here, we propose highly sensitive and stretchable strain sensors based on the reversible microcrack formation in composite thin films. Controllable parallel microcracks are generated in graphite thin films coated on elastomer films. Sensors made of graphite thin films with short microcracks possess high gauge factors (maximum value of 522.6) and stretchability (ε ≥ 50%), whereas sensors with long microcracks show ultrahigh sensitivity (maximum value of 11,344) with limited stretchability (ε ≤ 50%). We demonstrate the high performance strain sensing of our sensors in both small and large strain sensing applications such as human physiological activity recognition, human body large motion capturing, vibration detection, pressure sensing, and soft robotics.

  8. Identification and characterisation of potential biofertilizer bacterial strains

    Science.gov (United States)

    Karagöz, Kenan; Kotan, Recep; Dadaşoǧlu, Fatih; Dadaşoǧlu, Esin

    2016-04-01

    In this study we aimed that isolation, identification and characterizations of PGPR strains from rhizosphere of legume plants. 188 bacterial strains isolated from different legume plants like clover, sainfoin and vetch in Erzurum province of Turkey. These three plants are cultivated commonly in the Erzurum province. It was screen that 50 out of 188 strains can fix nitrogen and solubilize phosphate. These strains were identified via MIS (Microbial identification system). According to MIS identification results, 40 out of 50 strains were identified as Bacillus, 5 as Pseudomonas, 3 as Paenibacillus, 1 as Acinetobacter, 1 as Brevibacterium. According to classical test results, while the catalase test result of all isolates are positive, oxidase, KOH and starch hydrolysis rest results are variable.

  9. Strain Rate Effects in CFRP Used For Blast Mitigation

    Directory of Open Access Journals (Sweden)

    Sarah. L. Orton

    2014-04-01

    Full Text Available The purpose of this research is to gain a better understanding of strain rate effects in carbon fiber reinforced polymer (CFRP laminates exposed to blast loading. The use of CFRP offers an attractive option for mitigating structures exposed to blasts. However, the effect of high strain rates in CFRP composites commonly used in the civil industry is unknown. This research conducted tensile tests of 21 CFRP coupons using a hydraulically powered dynamic loader. The strain rates ranged from 0.0015 s−1 to 7.86 s−1 and are representative of strain rates that CFRP may see in a blast when used to strengthen reinforced concrete structures. The results of the testing showed no increase in the tensile strength or stiffness of the CFRP at the higher strain rates. In addition, the results showed significant scatter in the tensile strengths possibly due to the rate of loading or manufacture of the coupon.

  10. Formation of Tensilely Strained Germanium-on-Insulator

    Science.gov (United States)

    Hoshi, Yusuke; Sawano, Kentarou; Hamaya, Kohei; Miyao, Masanobu; Shiraki, Yasuhiro

    2012-01-01

    We fabricate a high-quality germanium-on-insulator (GOI) with tensile strain by combining the wafer bonding of a strained Ge grown on a Si substrate and an oxidized Si substrate and the selective etching of Si. The obtained 300-nm-thick strained GOI shows a smooth surface with RMS roughness of 0.15 nm and no dislocation is detected by cross-sectional transmission electron microscopy (XTEM). The tensile strain of 0.19% induced in the GOI is found to be maintained throughout the fabrication process. This suggests that the fabricated strained GOI has a high potential as an essential platform for high-performance electronic and optical devices.

  11. Strain modification on electronic transport of the phosphorene nanoribbon

    Directory of Open Access Journals (Sweden)

    Yawen Yuan

    2017-07-01

    Full Text Available We demonstrate theoretically how local strains can be tailored to control quantum transport of carriers on monolayer armchair and zigzag phosphorene nanoribbon. We find that the electron tunneling is forbidden when the in-plane strain exceeds a critical value. The critical strain is different for different crystal orientation of the ribbons, widths, and incident energies. By tuning the Fermi energy and strain, the channels can be transited from opaque to transparent. Moreover, for the zigzag-phosphorene nanoribbon, the two-fold degenerate quasi-flat edge band splits completely under certain strain. These properties provide us an efficient way to control the transport of monolayer phosphorene-based microstructure.

  12. Low Cycle Fatigue of Steel in Strain Controled Cyclic Bending

    Directory of Open Access Journals (Sweden)

    Kulesa Anna

    2016-03-01

    Full Text Available The paper presents a comparison of the fatigue life curves based on test of 15Mo3 steel under cyclic, pendulum bending and tension-compression. These studies were analyzed in terms of a large and small number of cycles where strain amplitude is dependent on the fatigue life. It has been shown that commonly used Manson-Coffin-Basquin model cannot be used for tests under cyclic bending due to the impossibility of separating elastic and plastic strains. For this purpose, some well-known models of Langer and Kandil and one new model of authors, where strain amplitude is dependent on the number of cycles, were proposed. Comparing the results of bending with tension-compression it was shown that for smaller strain amplitudes the fatigue life for both test methods were similar, for higher strain amplitudes fatigue life for bending tests was greater than for tension-compression.

  13. Consumer perceptions of strain differences in Cannabis aroma.

    Directory of Open Access Journals (Sweden)

    Avery N Gilbert

    Full Text Available The smell of marijuana (Cannabis sativa L. is of interest to users, growers, plant breeders, law enforcement and, increasingly, to state-licensed retail businesses. The numerous varieties and strains of Cannabis produce strikingly different scents but to date there have been few, if any, attempts to quantify these olfactory profiles directly. Using standard sensory evaluation techniques with untrained consumers we have validated a preliminary olfactory lexicon for dried cannabis flower, and characterized the aroma profile of eleven strains sold in the legal recreational market in Colorado. We show that consumers perceive differences among strains, that the strains form distinct clusters based on odor similarity, and that strain aroma profiles are linked to perceptions of potency, price, and smoking interest.

  14. Effect of pressurization on antibacterial properties of Lactobacillus strains

    Science.gov (United States)

    Jankowska, Agnieszka; Grześkiewicz, Aleksandra; Wiśniewska, Krystyna; Reps, Arnold

    2010-03-01

    The objective of the study was to determine the effect of high pressures on antibacterial properties of selected strains of the Lactobacillus species. Cultures of 22 strains were subjected to high-pressure treatment at 30, 60, 90, and 300 MPa/1 min/18 °C. The susceptibility of the bacteria pressurized at 30-90 MPa was diversified and depended on the strain and not on its species affiliation. When compared with pressures of 30-90 MPa, the pressure treatment at 300 MPa caused the inhibition of the acidifying activity of the strains analyzed. In turn, the pressures applied had no impact on the quantity of hydrogen peroxide synthesized. An increase in pressure was accompanied by a diminishing antibacterial activity of the investigated Lactobacillus strains.

  15. Choosing a Commercial Broiler Strain Based on Multicriteria Decision Analysis

    Directory of Open Access Journals (Sweden)

    Hosseini SA

    2014-05-01

    Full Text Available With the complexity and amount of information in a wide variety of comparative performance reports in poultry production, making a decision is difficult. This problem is overcomed only when all data can be put into a common unit. For this purpose, five different decision making analysis approaches including  Maximin, Equally likely, Weighted average, Ordered weighted averages and Technique for order preference by similarity to ideal solution were used to choose the best broiler strain among three ones based on their comparative performance and carcass characteristics. Commercial broiler strains of 6000 designated as R, A, and C (each strain 2000 were randomly allocated into three treatments of five replicates. In this study, all methods showed similar results except Maximin approach. Comparing different methods indicated that strain C with the highest world share market has the best performance followed by strains R and A.

  16. Electronic properties of polycrystalline graphene under large local strain

    International Nuclear Information System (INIS)

    He, Xin; Tang, Ning; Duan, Junxi; Mei, Fuhong; Meng, Hu; Lu, Fangchao; Xu, Fujun; Yang, Xuelin; Gao, Li; Wang, Xinqiang; Shen, Bo; Ge, Weikun

    2014-01-01

    To explore the transport properties of polycrystalline graphene under large tensile strain, a strain device has been fabricated using piezocrystal to load local strain onto graphene, up to 22.5%. Ionic liquid gate whose capability of tuning carrier density being much higher than that of a solid gate is used to survey the transfer characteristics of the deformed graphene. The conductance of the Dirac point and field effect mobility of electrons and holes is found to decrease with increasing strain, which is attributed to the scattering of the graphene grain boundaries, the strain induced change of band structure, and defects. However, the transport gap is still not opened. Our study is helpful to evaluate the application of graphene in stretchable electronics.

  17. Mechanical properties of graphene nanoribbons under uniaxial tensile strain

    Science.gov (United States)

    Yoneyama, Kazufumi; Yamanaka, Ayaka; Okada, Susumu

    2018-03-01

    Based on the density functional theory with the generalized gradient approximation, we investigated the mechanical properties of graphene nanoribbons in terms of their edge shape under a uniaxial tensile strain. The nanoribbons with armchair and zigzag edges retain their structure under a large tensile strain, while the nanoribbons with chiral edges are fragile against the tensile strain compared with those with armchair and zigzag edges. The fracture started at the cove region, which corresponds to the border between the zigzag and armchair edges for the nanoribbons with chiral edges. For the nanoribbons with armchair edges, the fracture started at one of the cove regions at the edges. In contrast, the fracture started at the inner region of the nanoribbons with zigzag edges. The bond elongation under the tensile strain depends on the mutual arrangement of covalent bonds with respect to the strain direction.

  18. Legionella pneumophila pangenome reveals strain-specific virulence factors

    Directory of Open Access Journals (Sweden)

    Peris-Bondia Francesc

    2010-03-01

    Full Text Available Abstract Background Legionella pneumophila subsp. pneumophila is a gram-negative γ-Proteobacterium and the causative agent of Legionnaires' disease, a form of epidemic pneumonia. It has a water-related life cycle. In industrialized cities L. pneumophila is commonly encountered in refrigeration towers and water pipes. Infection is always via infected aerosols to humans. Although many efforts have been made to eradicate Legionella from buildings, it still contaminates the water systems. The town of Alcoy (Valencian Region, Spain has had recurrent outbreaks since 1999. The strain "Alcoy 2300/99" is a particularly persistent and recurrent strain that was isolated during one of the most significant outbreaks between the years 1999-2000. Results We have sequenced the genome of the particularly persistent L. pneumophila strain Alcoy 2300/99 and have compared it with four previously sequenced strains known as Philadelphia (USA, Lens (France, Paris (France and Corby (England. Pangenome analysis facilitated the identification of strain-specific features, as well as some that are shared by two or more strains. We identified: (1 three islands related to anti-drug resistance systems; (2 a system for transport and secretion of heavy metals; (3 three systems related to DNA transfer; (4 two CRISPR (Clustered Regularly Interspaced Short Palindromic Repeats systems, known to provide resistance against phage infections, one similar in the Lens and Alcoy strains, and another specific to the Paris strain; and (5 seven islands of phage-related proteins, five of which seem to be strain-specific and two shared. Conclusions The dispensable genome disclosed by the pangenomic analysis seems to be a reservoir of new traits that have mainly been acquired by horizontal gene transfer and could confer evolutionary advantages over strains lacking them.

  19. Cardiac Strain Imaging With Coherent Compounding of Diverging Waves.

    Science.gov (United States)

    Grondin, Julien; Sayseng, Vincent; Konofagou, Elisa E

    2017-08-01

    Current methods of cardiac strain imaging at high frame rate suffer from motion matching artifacts or poor lateral resolution. Coherent compounding has been shown to improve echocardiographic image quality while maintaining a high frame rate, but has never been used to image cardiac strain. However, myocardial velocity can have an impact on coherent compounding due to displacements between frames. The objective of this paper was to investigate the feasibility and performance of coherent compounding for cardiac strain imaging at a low and a high myocardial velocity. Left-ventricular contraction in short-axis view was modeled as an annulus with radial thickening and circumferential rotation. Simulated radio-frequency channel data with a cardiac phased array were obtained using three different beamforming methods: single diverging wave, coherent compounding of diverging waves, and conventional focusing. Axial and lateral displacements and strains as well as radial strains were estimated and compared to their true value. In vivo feasibility of cardiac strain imaging with coherent compounding was performed and compared to single diverging wave imaging. At low myocardial velocities, the axial, lateral, and radial strain relative error for nine compounded waves (16.3%, 40.4%, and 18.9%) were significantly lower than those obtained with single diverging wave imaging (19.9%, 80.3%, and 30.6%) and closer to that obtained with conventional focusing (16.7%, 43.7%, and 16%). In vivo left-ventricular radial strains exhibited higher quality with nine compounded waves than with single diverging wave imaging. These results indicate that cardiac strain can be imaged using coherent compounding of diverging waves with a better performance than with single diverging wave imaging while maintaining a high frame rate, and therefore, has the potential to improve diagnosis of myocardial strain-based cardiac diseases.

  20. Antimicrobial resistance of bacterial strains isolated from avian cellulitis

    Directory of Open Access Journals (Sweden)

    MM Santos

    2014-03-01

    Full Text Available Avian cellulitis is an inflammatory process in the subcutaneous tissue, mainly located in the abdomen and thighs. This problem is commonly observed in poultry at slaughter and it is considered one of the major causes of condemnation of carcasses in Brazil. The aim of this study was to perform the microbial isolation of lesions of avian cellulitis from a processing plant located in the State of Goiás in order to analyze antimicrobial resistance by antibiogram test and to detect resistance genes by polymerase chain reaction. A total of 25 samples of avian cellulitis lesions were analyzed, from which 30 bacterial strains were isolated. There were eleven (44% strains of Escherichia coli, nine (36% strains of Staphylococcus epidermidis, seven (28% strains of Proteus mirabilis and three (12% strains of Manheimiahaemolytica. The antibiogram test showed that all strains were resistant to at least one antimicrobial. The gene of antimicrobial resistance tetB was detected in E. coli, S. epidermidis and P. mirabilis strains, and was the most frequently observed gene. The gene of antimicrobial resistance Sul1 was detected in all bacterial species, while tetA was found in E. coli and S. epidermidis strains, SHV in E. coli strains, S. epidermidis and P. mirabilis,and cat1 in one P. mirabilis strain. The results suggest a potential public health hazard due to the ability of these microorganisms to transmit antimicrobial resistancegenes to other microorganisms present in the intestinal tract of humans and animals, which may affect clinical-medical usage of these drugs.

  1. Genetic characterization of type A enterotoxigenic Clostridium perfringens strains.

    Directory of Open Access Journals (Sweden)

    Agi Deguchi

    2009-05-01

    Full Text Available Clostridium perfringens type A, is both a ubiquitous environmental bacterium and a major cause of human gastrointestinal disease, which usually involves strains producing C. perfringens enterotoxin (CPE. The gene (cpe encoding this toxin can be carried on the chromosome or a large plasmid. Interestingly, strains carrying cpe on the chromosome and strains carrying cpe on a plasmid often exhibit different biological characteristics, such as resistance properties against heat. In this study, we investigated the genetic properties of C. perfringens by PCR-surveying 21 housekeeping genes and genes on representative plasmids and then confirmed those results by Southern blot assay (SB of five genes. Furthermore, sequencing analysis of eight housekeeping genes and multilocus sequence typing (MLST analysis were also performed. Fifty-eight C. perfringens strains were examined, including isolates from: food poisoning cases, human gastrointestinal disease cases, foods in Japan or the USA, or feces of healthy humans. In the PCR survey, eight of eleven housekeeping genes amplified positive reactions in all strains tested. However, by PCR survey and SB assay, one representative virulence gene, pfoA, was not detected in any strains carrying cpe on the chromosome. Genes involved in conjugative transfer of the cpe plasmid were also absent from almost all chromosomal cpe strains. MLST showed that, regardless of their geographic origin, date of isolation, or isolation source, chromosomal cpe isolates, i assemble into one definitive cluster ii lack pfoA and iii lack a plasmid related to the cpe plasmid. Similarly, independent of their origin, strains carrying a cpe plasmid also appear to be related, but are more variable than chromosomal cpe strains, possibly because of the instability of cpe-borne plasmid(s and/or the conjugative transfer of cpe-plasmid(s into unrelated C. perfringens strains.

  2. Molecular Tracking, through Processing, of Campylobacter Strains Colonizing Broiler Flocks▿

    Science.gov (United States)

    Elvers, Karen T.; Morris, Victoria K.; Newell, Diane G.; Allen, Vivien M.

    2011-01-01

    Many of the poultry flocks produced in the United Kingdom are colonized with Campylobacter, and the intensive nature of poultry processing usually results in contaminated carcasses. In this study, a previously reported molecular oligonucleotide probe method was used to track a specific flock-colonizing strain(s) on broiler carcasses during processing in two United Kingdom commercial poultry processing plants. Five Campylobacter-positive flocks were sampled at four points along the processing line, postbleed, postpluck, prechill, and postchill, and two Campylobacter-negative flocks processed immediately after positive flocks were sampled prechill. flaA was sequenced from Campylobacter strains isolated from these flocks, and strain-specific probes were synthesized. Skin and cecal samples were plated onto selective agar to give individual colonies, which were transferred onto membranes. These were then hybridized with the strain- and genus-specific probes. For all the 5 positive flocks, there was a significant reduction in campylobacters postbleed compared to postpluck but no subsequent fall on sampling pre- and postchill, and the strain(s) predominating on the carcasses throughout processing came from the flock being processed. This indicates that strains from the abattoir environment were not a significant cause of carcass contamination in flocks with well-established campylobacter colonization. However, negative flocks that were preceded by positive flocks were contaminated by strains that did not generally originate from the predominating strains recovered from the ceca of the previous positive flocks. This suggests that the abattoir environment has a significant role in the contamination of carcasses from negative but not fully colonized flocks. PMID:21705532

  3. Dual-phase cardiac diffusion tensor imaging with strain correction.

    Directory of Open Access Journals (Sweden)

    Christian T Stoeck

    Full Text Available In this work we present a dual-phase diffusion tensor imaging (DTI technique that incorporates a correction scheme for the cardiac material strain, based on 3D myocardial tagging.In vivo dual-phase cardiac DTI with a stimulated echo approach and 3D tagging was performed in 10 healthy volunteers. The time course of material strain was estimated from the tagging data and used to correct for strain effects in the diffusion weighted acquisition. Mean diffusivity, fractional anisotropy, helix, transverse and sheet angles were calculated and compared between systole and diastole, with and without strain correction. Data acquired at the systolic sweet spot, where the effects of strain are eliminated, served as a reference.The impact of strain correction on helix angle was small. However, large differences were observed in the transverse and sheet angle values, with and without strain correction. The standard deviation of systolic transverse angles was significantly reduced from 35.9±3.9° to 27.8°±3.5° (p<0.001 upon strain-correction indicating more coherent fiber tracks after correction. Myocyte aggregate structure was aligned more longitudinally in systole compared to diastole as reflected by an increased transmural range of helix angles (71.8°±3.9° systole vs. 55.6°±5.6°, p<0.001 diastole. While diastolic sheet angle histograms had dominant counts at high sheet angle values, systolic histograms showed lower sheet angle values indicating a reorientation of myocyte sheets during contraction.An approach for dual-phase cardiac DTI with correction for material strain has been successfully implemented. This technique allows assessing dynamic changes in myofiber architecture between systole and diastole, and emphasizes the need for strain correction when sheet architecture in the heart is imaged with a stimulated echo approach.

  4. Angiogenesis is induced by airway smooth muscle strain.

    Science.gov (United States)

    Hasaneen, Nadia A; Zucker, Stanley; Lin, Richard Z; Vaday, Gayle G; Panettieri, Reynold A; Foda, Hussein D

    2007-10-01

    Angiogenesis is an important feature of airway remodeling in both chronic asthma and chronic obstructive pulmonary disease (COPD). Airways in those conditions are exposed to excessive mechanical strain during periods of acute exacerbations. We recently reported that mechanical strain of human airway smooth muscle (HASM) led to an increase in their proliferation and migration. Sustained growth in airway smooth muscle in vivo requires an increase in the nutritional supply to these muscles, hence angiogenesis. In this study, we examined the hypothesis that cyclic mechanical strain of HASM produces factors promoting angiogenic events in the surrounding vascular endothelial cells. Our results show: 1) a significant increase in human lung microvascular endothelial cell (HMVEC-L) proliferation, migration, and tube formation following incubation in conditioned media (CM) from HASM cells exposed to mechanical strain; 2) mechanical strain of HASM cells induced VEGF expression and release; 3) VEGF neutralizing antibodies inhibited the proliferation, migration, and tube formations of HMVEC-L induced by the strained airway smooth muscle CM; 4) mechanical strain of HASM induced a significant increase in hypoxia-inducible factor-1alpha (HIF-1alpha) mRNA and protein, a transcription factor required for VEGF gene transcription; and 5) mechanical strain of HASM induced HIF-1alpha/VEGF through dual phosphatidylinositol 3-kinase (PI3K)/Akt/mammalian target of rapamycin (mTOR) and ERK pathways. In conclusion, exposing HASM cells to mechanical strain induces signal transduction pathway through PI3K/Akt/mTOR and ERK pathways that lead to an increase in HIF-1alpha, a transcription factor required for VEGF expression. VEGF release by mechanical strain of HASM may contribute to the angiogenesis seen with repeated exacerbation of asthma and COPD.

  5. Modeling of Strain Effects in Multi-component Semiconductors

    Science.gov (United States)

    Arjmand, Mehrdad

    Strain affects the properties of crystalline material by changing the atomic symmetry. Controlling the strain in semiconductors helps to tune properties of material and design new material. For instance, strained semiconductor heterostructures have improved the efficiency of traditional solar cells remarkably. Another example of strain application is in electronic devices. Strained heterostructure nanowires provide a better control on electronic properties of gates used in transistors. Gate-all-around nanowires are promising candidates to power microprocessors in future. Strain is also used to make quantum dot structures from semiconductors. These quantum dots are used in quantum computing, diode lasers and sensors. Once the stored strain in a structure reaches a critical limit, it relaxes by triggering different phenomena in the structure. For instance, strain causes morphology change, plastic deformation, phase separation and intermixing, fracture, buckling, bulging and peeling. In order to use these strained structures for design purposes, it is critical to understand these different relaxation phenomena and be able to control them. Modeling provides a powerful framework to understand different relaxation mechanisms and provide guidance to control these strain induced phenomena. In this thesis, I have developed a continuum based model called "phase field" to study morphology change, plastic deformation and phase separation in multi-component semiconductors during growth and annealing processes. The advantage of phase field approach compared to some other modeling techniques is that it includes the effects of both thermodynamics and kinetics. Also, I have developed a continuum based elasto-plasticity model to study the effects of plastic relaxation in semiconductor nanowires. This model can particularly be useful for piezoelectric and surface stability analysis of nanowires.

  6. Detection of phosphatase activity in aquatic and terrestrial cyanobacterial strains

    Directory of Open Access Journals (Sweden)

    Babić Olivera B.

    2013-01-01

    Full Text Available Cyanobacteria, as highly adaptable microorganisms, are characterized by an ability to survive in different environmental conditions, in which a significant role belongs to their enzymes. Phosphatases are enzymes produced by algae in relatively large quantities in response to a low orthophosphate concentration and their activity is significantly correlated with their primary production. The activity of these enzymes was investigated in 11 cyanobacterial strains in order to determine enzyme synthesis depending on taxonomic and ecological group of cyanobacteria. The study was conducted with 4 terrestrial cyanobacterial strains, which belong to Nostoc and Anabaena genera, and 7 filamentous water cyanobacteria of Nostoc, Oscillatoria, Phormidium and Microcystis genera. The obtained results showed that the activity of acid and alkaline phosphatases strongly depended on cyanobacterial strain and the environment from which the strain originated. Higher activity of alkaline phosphatases, ranging from 3.64 to 85.14 μmolpNP/s/dm3, was recorded in terrestrial strains compared to the studied water strains (1.11-5.96 μmolpNP/s/dm3. The activity of acid phosphatases was higher in most tested water strains (1.67-6.28 μmolpNP/s/dm3 compared to the activity of alkaline phosphatases (1.11-5.96 μmolpNP/s/dm3. Comparing enzyme activity of nitrogen fixing and non-nitrogen fixing cyanobacteria, it was found that most nitrogen fixing strains had a higher activity of alkaline phosphatases. The data obtained in this work indicate that activity of phosphatases is a strain specific property. The results further suggest that synthesis and activity of phosphatases depended on eco-physiological characteristics of the examined cyanobacterial strains. This can be of great importance for the further study of enzymes and mechanisms of their activity as a part of cyanobacterial survival strategy in environments with extreme conditions. [Projekat Ministarstva nauke Republike

  7. Influence of Environmental Parameters on Trichoderma Strains with Biocontrol Potential

    Directory of Open Access Journals (Sweden)

    Zsuzsanna Antal

    2003-01-01

    Full Text Available Several mycoparasitic strains belonging to the filamentous fungal genus Trichoderma are promising candidates for the biological control of plant pathogenic fungi. When planning the application of antagonistic Trichoderma strains for the purposes of biological control, it is very important to consider the environmental parameters affecting the biocontrol agents in the soil. A series of abiotic and biotic environmental parameters has an influence on the biocontrol efficacy of Trichoderma. Some important parameters to be considered are the effects of temperature, water potential and pH, and the presence of pesticides, metal ions and antagonistic bacteria in the soil. Most of the Trichoderma strains are mesophilic. Low temperatures in winter may cause a problem during biological control by influencing the activity of the biocontrol agents. Another problem emerging during the application of Trichoderma strains as biocontrol agents is that they cannot tolerate dry conditions, however, we may need biocontrol agents against plant pathogenic fungi which are able to grow and cause disease even in dry soils. The pH characteristics of the soil also belong to the most important environmental parameters affecting the activities of mycoparasitic Trichoderma strains. Within the frames of a complex integrated plant protection strategy, we may have to combine Trichoderma strains with chemical pesticides or metal compounds, therefore it is important to collect information about the effects of pesticides and metal ions on the biocontrol strains. Antagonistic soil bacteria may also have negative effects on the biocontrol abilities of Trichoderma strains, therefore it may be advantageous if a biocontrol strain possesses bacterium- degrading abilities as well. This review will discuss the literature about the influence of temperature, water potential, pH, pesticides, metal ions and antagonistic bacteria on mycoparasitic Trichoderma strains including the results of our

  8. Ontogeny of bone strain: the zygomatic arch in pigs.

    Science.gov (United States)

    Herring, Susan W; Pedersen, Scott C; Huang, Xiaofeng

    2005-12-01

    At the time of weaning, infant animals have little experience with hard food, and thus their skulls are not likely to be epigenetically adapted for the loads imposed by mastication. We examined bone strain in the zygomatic arch of 4-week-old weanling piglets. Functional strains in piglets differed from those previously reported for older pigs in that the squamosal bone was not bent in the horizontal plane and the principal tensile strain on the zygomatic bone did not correspond to the direction of masseter muscle pull. Strain patterns were more variable in piglets than in older pigs. In older pigs, masticatory strains can be reproduced by stimulating the masseter muscles. When the piglet masseter was stimulated, strain patterns were more similar to those of older pigs, but shear strain magnitudes were the largest yet recorded from mammalian skull bones, up to 4000 muepsilon. To put these findings in the context of skeletal adaptation, 45 dry skulls, including some animals from the strain study, were measured. Reduced major axis regressions indicated that the infant arch was rounder in cross section and straighter than that of older animals. With growth, the arch became dorsoventrally higher, while mediolateral thickness decreased in the squamosal bone. Overall, these changes should make strain more predictable, explaining the lower variability in older animals. Other factors likely to be important in causing unique strain regimes in piglets include (1) unfamiliarity with hard food, (2) greater importance of muscles other than the same-side masseter and (3) greater proximity of molariform teeth to the arch. Collectively, these data indicate that the skeleton is not pre-adapted for specific functional loads.

  9. Virulence Genes and Antibiotic Susceptibilities of Uropathogenic E. coli Strains.

    Science.gov (United States)

    Uzun, Cengiz; Oncül, Oral; Gümüş, Defne; Alan, Servet; Dayioğlu, Nurten; Küçüker, Mine Anğ

    2015-01-01

    The aim of this study is to detect the presence of and possible relation between virulence genes and antibiotic resistance in E. coli strains isolated from patients with acute, uncomplicated urinary tract infections (UTI). 62 E. coli strains isolated from patients with acute, uncomplicated urinary tract infections (50 strains isolated from acute uncomplicated cystitis cases (AUC); 12 strains from acute uncomplicated pyelonephritis cases (AUP)) were screened for virulence genes [pap (pyelonephritis-associated pili), sfa/foc (S and F1C fimbriae), afa (afimbrial adhesins), hly (hemolysin), cnf1 (cytotoxic necrotizing factor), aer (aerobactin), PAI (pathogenicity island marker), iroN (catecholate siderophore receptor), ompT (outer membrane protein T), usp (uropathogenic specific protein)] by PCR and for antimicrobial resistance by disk diffusion method according to CLSI criteria. It was found that 56 strains (90.3%) carried at least one virulence gene. The most common virulence genes were ompT (79%), aer (51.6%), PAI (51.6%) and usp (56.5%). 60% of the strains were resistant to at least one antibiotic. The highest resistance rates were against ampicillin (79%) and co-trimoxazole (41.9%). Fifty percent of the E. coli strains (31 strains) were found to be multiple resistant. Eight (12.9%) out of 62 strains were found to be ESBL positive. Statistically significant relationships were found between the absence of usp and AMP - SXT resistance, iroN and OFX - CIP resistance, PAI and SXT resistance, cnf1 and AMP resistance, and a significant relationship was also found between the presence of the afa and OFX resistance. No difference between E. coli strains isolated from two different clinical presentations was found in terms of virulence genes and antibiotic susceptibility.

  10. Studies of the strain-dependent properties of A15 filamentary conductors at Brookhaven National Laboratory

    International Nuclear Information System (INIS)

    Luhman, T.; Welch, D.O.

    1980-01-01

    Work at BNL pertaining to the strain response of filamentary bronze-processed superconductors is reviewed. This work includes the intrinsic strain dependence of the critical properties of A15 structure compounds, the nature of the initial internal strain state of composite conductors, and the interplay between these residual strains and applied strains which governs the response of the conductor to external strain. Some factors which can enhance the strain tolerances of filamentary conductors are briefly discussed

  11. Screening and Evaluation of Polyhydroxybutyrate-Producing Strains from Indigenous Isolate Cupriavidus taiwanensis Strains

    Directory of Open Access Journals (Sweden)

    Om-Murugan Janarthanan

    2011-01-01

    Full Text Available Polyhydroxyalkanoate (PHA is a biodegradable material with many potential biomedical applications, including medical implants and drug delivery. This study developed a system for screening production strains in order to optimize PHA production in Cupriavidus taiwanensis 184, 185, 186, 187, 204, 208, 209 and Pseudomona oleovorans ATCC 29347. In this study, Sudan black B staining, Infrared (IR and Gas Chromatography (GC analysis indicated that the best strain for PHA synthesis is C. taiwanensis 184, which obtains polyhydroxybutyrate (PHB. Cultivation of C. taiwanensis 184 under a pH of 7.0, at 30 °C, and at an agitation rate of 200 rpm, obtained a PHB content of 10% and PHB production of 0.14 g/L. The carbon and nitrogen types selected for analysis of PHB production by C. taiwanensis 184 were gluconic acid and NH4Cl, respectively. Optimal carbon/nitrogen ratio for PHB production was also determined. This study demonstrated a PHB content of 58.81% and a PHB production of 2.44 g/L when the carbon/nitrogen ratio of 8/1 was selected for C. taiwanensis 184. A two‑stage fermentation strategy significantly enhanced PHB content and PHB production. Under a two-stage fermentation strategy with nutrient‑limited conditions, C. taiwanensis 184 obtained a PHB content of 72% and a PHB concentration of 7 g/L. Finally, experimental results confirmed that optimizing the growth medium and fermentation conditions for cultivating the indigenous C. taiwanensis 184 strain substantially elevated PHB content from 10% to 72% and PHB production from 0.14 g/L to 7 g/L, respectively.

  12. Experimental study on an FBG strain sensor

    Science.gov (United States)

    Liu, Hong-lin; Zhu, Zheng-wei; Zheng, Yong; Liu, Bang; Xiao, Feng

    2018-01-01

    Landslides and other geological disasters occur frequently and often cause high financial and humanitarian cost. The real-time, early-warning monitoring of landslides has important significance in reducing casualties and property losses. In this paper, by taking the high initial precision and high sensitivity advantage of FBG, an FBG strain sensor is designed combining FBGs with inclinometer. The sensor was regarded as a cantilever beam with one end fixed. According to the anisotropic material properties of the inclinometer, a theoretical formula between the FBG wavelength and the deflection of the sensor was established using the elastic mechanics principle. Accuracy of the formula established had been verified through laboratory calibration testing and model slope monitoring experiments. The displacement of landslide could be calculated by the established theoretical formula using the changing values of FBG central wavelength obtained by the demodulation instrument remotely. Results showed that the maximum error at different heights was 9.09%; the average of the maximum error was 6.35%, and its corresponding variance was 2.12; the minimum error was 4.18%; the average of the minimum error was 5.99%, and its corresponding variance was 0.50. The maximum error of the theoretical and the measured displacement decrease gradually, and the variance of the error also decreases gradually. This indicates that the theoretical results are more and more reliable. It also shows that the sensor and the theoretical formula established in this paper can be used for remote, real-time, high precision and early warning monitoring of the slope.

  13. Strained Compromises? Danish Flexicurity During Crisis

    Directory of Open Access Journals (Sweden)

    Christian Lyhne Ibsen

    2011-01-01

    Full Text Available The Danish concept of flexicurity in a `Golden Triangle´ of low job protection, high income security and high employment security is not only about a balance between labor market flexibility and social security. Arguably, it is also a series of more or less stable underlying compromises between social partners about the main mechanisms and aims of labor market regulation which - supposedly - should be focused on employment rather than jobs, and competition on quality rather than on labor costs. However, the `Golden Triangle´ - this article argues - seems in need of complementary concepts. The article therefore introduces, `centralized decentralization´ - a concept that directs our attention to forms of flexibility and security primarily for people in work. Most studies on Danish flexicurity have been carried out under favorable economic conditions. In light of the economic slump hitting Denmark in 2008, this article investigates if and how the recession challenged these compromises by comparing two rounds of case-based interviews in three metalworking companies in 2007 and 2009. It is shown that practice has indeed changed - albeit modestly - due to worsened economic circumstances. For example the case studies show that the hypothesized preference for external numerical flexibility is perhaps too crude as employers use different ways to restructure employment. Especially the examples of de facto concessionary bargaining to save jobs are important here - although the extent of concessions is modest. The evidence thus suggests that the `Golden Triangle´ flexicurity compromises are indeed strained by the economic cycle and that responses to impetus for restructuring are far more nuanced than sometimes portrayed. It is argues that more company studies across national labor markets and industrial relations institutions will enhance our understanding of the dynamics during times of restructuring.

  14. Global longitudinal strain: a useful everyday measurement?

    Directory of Open Access Journals (Sweden)

    A King

    2016-10-01

    Full Text Available Herceptin (Trastuzumab is a widely used and effective drug for the treatment of Her2+ breast cancer but its cardiotoxic side effects require regular monitoring by echocardiography. A 10% reduction in left ventricular ejection fraction can lead to suspension of treatment and therefore has significant implications for patient prognosis in terms of cardiac and cancer outcomes. Assessment of LV function by conventional 2D biplane method of discs (2DEF has limitations in accuracy and reproducibility. Global longitudinal strain (GLS is becoming more widely available and user friendly. It has been shown to demonstrate myocardial damage earlier in treatment than 2DEF, allowing the option of pharmacological intervention at a pre-clinical stage and preventing the interruption of Herceptin. This study compares the reproducibility of GLS with that of 2DEF in a routine clinical environment. Fifty echocardiograms performed on female patients undergoing Herceptin treatment were used to measure both 2DEF and GLS within the recommended standard appointment time of 40 min. The data were re-measured (blind by the same operator a minimum of 14 days later to determine intra-operator variation. These data were also measured by a second operator (blind, to assess inter-operator variation. Analysis by direct comparison, intra-class correlation (ICC, coefficient of variation (CV and Bland–Altman plots demonstrated that GLS is a more reproducible measurement than 2DEF. This is important to prevent clinical decisions being erroneously based on variation in operator measurement. The investigation also shows that with advances in machine software this is a practical addition to routine assessment rather than merely a research tool.

  15. Development of a mechanical strain amplifying transducer with Bragg grating sensor for low-amplitude strain sensing

    Science.gov (United States)

    Nawrot, Urszula; Geernaert, Thomas; De Pauw, Ben; Anastasopoulos, Dimitrios; Reynders, Edwin; De Roeck, Guido; Berghmans, Francis

    2017-07-01

    Vibration-based damage identification is a well-known method to support health monitoring of civil engineering structures. Damage in such structures can be identified by measuring changes of the natural frequencies, damping factors or modal displacements of the structure. However, this approach suffers from the low sensitivity of these natural frequencies and modal displacements to certain types of damage. Modal strains and curvatures can be more sensitive to local damage, but direct monitoring of these quantities with sufficient spatial resolution is not possible with current measurement techniques due to the very small strain levels (sub-microstrain) caused by ambient or operational excitation. To deal with this issue, we propose a novel mechanical transducer equipped with an optical fiber Bragg grating (FBG) sensor that enhances the sensitivity to strain with a factor larger than 30. The principle of operation of the transducer exploits a symmetric cantilever structure that enlarges the strain experienced by the FBG sensor compared to the strain applied to the transducer itself. We carried out dynamic and static tests to verify the ability of the strain-amplifying transducers to measure small-amplitude strain levels and to evidence the potential for carrying out FBG based modal strain measurements on concrete civil engineering structures.

  16. Gender and General Strain Theory: A Comparison of Strains, Mediating, and Moderating Effects Explaining Three Types of Delinquency

    Science.gov (United States)

    Moon, Byongook; Morash, Merry

    2017-01-01

    The present study of 659 Korean adolescents tests General Strain Theory's (GST) utility in explaining gender differences in delinquency causation. It models the effects of key strains, negative emotions, and a composite measure of several conditioning factors separately for boys and girls and for delinquency. Consistent with the theory, males and…

  17. Genome characterization of Turkey Rotavirus G strains from the United States identifies potential recombination events with human Rotavirus B strains.

    Science.gov (United States)

    Chen, Fangzhou; Knutson, Todd P; Porter, Robert E; Ciarlet, Max; Mor, Sunil Kumar; Marthaler, Douglas G

    2017-12-01

    Rotavirus G (RVG) strains have been detected in a variety of avian species, but RVG genomes have been published from only a single pigeon and two chicken strains. Two turkey RVG strains were identified and characterized, one in a hatchery with no reported health issues and the other in a hatchery with high embryo/poult mortality. The two turkey RVG strains shared only an 85.3 % nucleotide sequence identity in the VP7 gene while the other genes possessed high nucleotide identity among them (96.3-99.9 %). Low nucleotide percentage identities (31.6-87.3 %) occurred among the pigeon and chicken RVG strains. Interestingly, potential recombination events were detected between our RVG strains and a human RVB strain, in the VP6 and NSP3 segments. The epidemiology of RVG in avian flocks and the pathogenicity of the two different RVG strains should be further investigated to understand the ecology and impact of RVG in commercial poultry flocks.

  18. Analysis of the Temperature and Strain-Rate Dependences of Strain Hardening

    Science.gov (United States)

    Kreyca, Johannes; Kozeschnik, Ernst

    2018-01-01

    A classical constitutive modeling-based Ansatz for the impact of thermal activation on the stress-strain response of metallic materials is compared with the state parameter-based Kocks-Mecking model. The predicted functional dependencies suggest that, in the first approach, only the dislocation storage mechanism is a thermally activated process, whereas, in the second approach, only the mechanism of dynamic recovery is. In contradiction to each of these individual approaches, our analysis and comparison with experimental evidence shows that thermal activation contributes both to dislocation generation and annihilation.

  19. Strain specific variation of outer membrane proteins of wild Yersinia pestis strains subjected to different growth temperatures

    Directory of Open Access Journals (Sweden)

    Frederico Guilherme Coutinho Abath

    1990-03-01

    Full Text Available Three Yersinia pestis strains isolated from humans and one laboratory strain (EV76 were grown in rich media at 28§C and 37§C and their outer membrane protein composition compared by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-Page. Several proteins with molecular weights ranging from 34 kDa to 7 kDa were observed to change in relative abundance in samples grown at different temperatures. At least seven Y. pestis outer membrane proteins showed a temperature-dependent and strain-specific behaviour. Some differences between the outer membrane proteins of full-pathogenic wild isolates and the EV76 strain could aldso be detected and the relevance of this finding on the use of laboratory strains as a reference to the study of Y. pestis biological properties is discuted.

  20. Differential stress transcriptome landscape of historic and recently emerged hypervirulent strains of Clostridium difficile strains determined using RNA-seq.

    Directory of Open Access Journals (Sweden)

    Joy Scaria

    Full Text Available C. difficile is the most common cause of nosocomial diarrhea in North America and Europe. Genomes of individual strains of C. difficile are highly divergent. To determine how divergent strains respond to environmental changes, the transcriptomes of two historic and two recently isolated hypervirulent strains were analyzed following nutrient shift and osmotic shock. Illumina based RNA-seq was used to sequence these transcriptomes. Our results reveal that although C. difficile strains contain a large number of shared and strain specific genes, the majority of the differentially expressed genes were core genes. We also detected a number of transcriptionally active regions that were not part of the primary genome annotation. Some of these are likely to be small regulatory RNAs.