Sample records for ammonium thiocyanates

  1. Study on mechanism of isomerization between ammonium thiocyanate and thiourea (United States)

    Zhang, Chao-Zhi; Niu, Meng-Xiao


    Application of ammonium thiocyanate that can be separated from wastewater in coking plant is limited. It may isomerize to thiourea which has widely applied in industry. However, the isomerization yield is low. Moreover, the isomerization temperature is more than 145 °C. In this paper, the isomerization was investigated. The mechanism of the isomerization was supposed based on quantum chemistry calculations. Ammonia was employed as a catalyst to lower isomerization temperature and improved the yield of thiourea in the isomerization reaction. Results of quantum chemical calculation and experiments support the supposed mechanism. The mechanism can be applied in production of thiourea from isomerization of ammonium thiocyanate. The paper suggests a useful way of resourcizing ammonium thiocyanate in wastewater.

  2. Oxidation of ferrocene by thiocyanic acid in the presence of ammonium oxalate

    Energy Technology Data Exchange (ETDEWEB)

    Ruslin, Farah bt; Yamin, Bohari M. [School of Chemical Science and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia (Malaysia)


    A flake-like crystalline salt was obtained from the reaction of ferrocene, oxalic acid and ammonium thiocyanate in ethanol The elemental analysis and spectroscopic data were in agreement with the preliminary X-ray molecular structure. The compound consists of four ferrocenium moieties and a counter anion consisting of two (tetraisothiocyanato)iron(III) linked by an oxalato bridging group in such a way that both iron central atoms adopt octahedral geometries.

  3. Oxidative Pressure Leaching of Silver from Flotation Concentrates with Ammonium Thiocyanate Solution (United States)

    Yang, Sheng-Hai; Yang, Jian-Guang; Liu, Wei; Chen, Geng-Tao; Tang, Mo-Tang; Qiu, Guan-Zhou


    The thermodynamics and technologies of the selective pressure leaching of silver from flotation concentrates were investigated in an ammonium thiocyanate medium. Thermodynamic analyses, which include silver solubility in NH4SCN solution and Eh-pH diagrams of the Me-MeS-NH4SCN-H2O system at 25 °C, were discussed. The effects of several factors, such as temperature, leaching time, oxidant, pH value, flotation concentrates concentration, surfactant concentration, and so on, on the extraction percentages of silver and zinc were investigated. The following optimal leaching conditions were obtained: NH4SCN concentration 1.5 M, lignin concentration 0.5 g/L, Fe3+ concentration 2 g/L, flotation concentrates addition 200 g/L, and oxygen pressure 1.2 MPa at 130 °C for 3 hours. Under these optimum conditions, the average extraction percentage of silver exceeded 94 pct, whereas the average extraction percentage of zinc was less than 3 pct. Only 7 pct of ammonium thiocyanate was consumed after 4 cycles, which indicated that ammonium thiocyanate hardly was oxidized under these oxidative pressure leaching conditions.

  4. Study of the reaction between ammonium thiocyanate and Fe (II or Fe (III using infrared spectroscopy: an experiment of prebiotic chemistry

    Directory of Open Access Journals (Sweden)

    Dimas Augusto Morozin Zaia


    Full Text Available The prebiotic chemistry studies the reactions that could be played an important role on origins of life on Earth. However, these reactions should be carried out under conditions that existed on the prebiotic Earth. The laboratory experiments of heating substances in solid state could be corresponding to the following prebiotic environments: cooling lava from volcanoes on the ground and impact of meteorites or comets on the earth. The present study examined the reaction in solid state between ammonium thiocyanate and Fe (II or Fe (III. The samples were heated at 220 ºC in several different times (6 hours, 24 hours, 7 days. The most important finding of this work is that a reaction of oxidation-reduction is occurring between Fe (II and ammonium thiocyanate, the infrared spectrum of the reaction product ammonium thiocyanate/Fe (II showed a band that it is characteristic of ferricyanate. The infrared spectra also showed bands that they are characteristics of guanidine thiocyanate. Thus, the heating of ammonium thiocyanate with Fe (II in solid state is synthesizing guanidine thiocyanate and at the same time oxidizing Fe (II to Fe (III. The product of reaction between Fe (III and ammonium thiocyanate is guanidine thiocyanate. Fe (II and Fe (III are reacting with ammonium thiocyanate in different way.

  5. Technical Study on Gold Extraction by Ammonium Thiocyanate%硫氰酸铵法提金工艺研究

    Institute of Scientific and Technical Information of China (English)

    宋岷蔚; 刘菁; 俞海平


    With some sulfide-locked gold fine ore from Sichuan Province as raw material, comparative tests were conduced for gold extraction by cyanide process and by using ammonium thiocyanate respectively. The effects and characteristics of oxidants Fe3 + and MnO2 in gold leaching process with ammonium thiocyanate were explored. The gold leaching mechanism by cyanide process and by using ammonium thicyanate was also preliminarily investigated and analyzed. Results show that gold extraction by using ammonium thiocyanate, compared with gold cyanidation, can lead to a better result with gold leaching rate up to 96% while using Fe3 + as oxidant.%以四川某硫化物包裹型金矿石精金砂为原料,对比研究了氰化法和硫氰酸铵法的提金效果,考察了氧化剂Fe3+和MnO2在硫氰酸铵浸金工艺中的作用和特点,并对氰化法和硫氰酸铵法的浸出机理进行了初步探讨和分析.结果表明,硫氰酸铵法比氰化法有更好的提金效率;用Fe3+作氧化剂的硫氰酸铵浸金法提金效率可达96%.

  6. Aqueous ammonium thiocyanate solutions as refractive index-matching fluids with low density and viscosity (United States)

    Morrison, Benjamin C.; Borrero-Echeverry, Daniel


    Index-matching fluids play an important role in many fluid dynamics experiments, particularly those involving particle tracking, as they can be used to minimize errors due to distortion from the refraction of light across interfaces of the apparatus. Common index-matching fluids, such as sodium iodide solutions or mineral oils, often have densities or viscosities very different from those of water. This can make them undesirable for use as a working fluid when using commercially available tracer particles or at high Reynolds numbers. A solution of ammonium thiocyanate (NH4SCN) can be used for index-matching common materials such as borosilicate glass and acrylic, and has material properties similar to those of water (ν ~ 1 . 6 cSt and ρ ~ 1 . 1 g/cc). We present an empirical model for predicting the refractive index of aqueous NH4SCN solutions as a function of temperature and NH4SCN concentration that allows experimenters to develop refractive index matching solutions for various common materials. This work was supported by the National Science Foundation (CBET-0853691) and by the James Borders Physics Student Fellowship at Reed College.

  7. The use of a polymer inclusion membrane as a sorbent for online preconcentration in the flow injection determination of thiocyanate impurity in ammonium sulfate fertilizer. (United States)

    Ohshima, Takumi; Kagaya, Shigehiro; Gemmei-Ide, Makoto; Cattrall, Robert W; Kolev, Spas D


    A polymer inclusion membrane (PIM) is used for the first time as a sorbent in the construction of a preconcentration column to enhance the sensitivity in flow injection analysis (FIA). The PIM-coated column is readily prepared by coating the PIM containing poly(vinyl chloride), Aliquat 336, and 1-tetradecanol onto glass beads packed in a glass tube. The determination of trace amounts of thiocyanate in ammonium sulfate fertilizer demonstrates the potential of the proposed PIM-coated column in FIA. Thiocyanate standards or samples of relatively large volume (e.g. up to 2000 µL) are injected into a nitrate carrier stream. The sample zone passes through the proposed preconcentration column where thiocyanate is concentrated in a smaller volume of a carrier solution thus resulting in up to 7.4 fold increase in sensitivity. Thiocyanate is detected spectrophotometrically after its reaction with Fe(III) downstream of the preconcentration column. The limits of detection of thiocyanate in the absence and presence of 20 g L(-1) ammonium sulfate (S/N=2) are 0.014 and 0.024 mg L(-1), respectively. Thiocyanate was successfully determined in several samples of ammonium sulfate fertilizer.

  8. Studies on extraction of beryllium from thiocyanate solutions by quaternary ammonium halides. (United States)

    El-Yamani, I S; El-Messieh, E N

    A 0.4M tricaprylmethylammonium chloride solution in n-hexane was used for the quantitative extraction of beryllium from hydrochloric acid (pH 3) and 5M potassium thiocyanate. Beryllium was stripped from the organic phase with 1M sodium hydroxide, then determined volumetrically with bismuthyl perchlorate and bromocresol green indicator. Beryllium was extracted in presence of a large number of elements which are usually associated with it in beryl and in fission products of nuclear fuel.

  9. Extraction of high-quality epidermal RNA after ammonium thiocyanate-induced dermo-epidermal separation of 4 mm human skin biopsies

    DEFF Research Database (Denmark)

    Clemmensen, Anders; Thomassen, Mads; Clemmensen, Ole;


    To obtain a separation of the epidermal and dermal compartments to examine compartment specific biological mechanisms in the skin, we incubated 4 mm human skin punch biopsies in ammonium thiocyanate. We wanted to test (i) the histological quality of the dermo-epidermal separation obtained...... was not always histologically well-defined (i.e. occurred partly intra-epidermally), but also varied between subjects. Consequently, curettage along the dermal surface of the biopsy was added to the procedure. This modified method resulted in an almost perfect separation of the epidermal and dermal compartments...... and almost completely separated from the dermis of 4 mm skin biopsies by 30 min incubation in 3.8% ammonium thiocyanate combined with curettage of the dermal surface, producing high-quality RNA suitable for transcriptional analysis. Our refined method of dermo-epidermal separation will undoubtedly prove...

  10. Indirect Determination of CTMAB with Sodium Chloride and Ammonium Thiocyanate by Floatation and Separation of Zinc

    Institute of Scientific and Technical Information of China (English)


    A new method for indirect determination of cetyl-trimethyl ammonium bromide (CTMAB) with NaCl and NH4SCN by floatation and separation of zinc has been studied. The study shows that Zn(II) can associate with NH4SCN and CTMAB to form insoluble ternary ion-association complex, and the precipitate can float on the surface of the liquid phase. A good linear relationship is observed between the floatation yield (E%) of Zn(II) and the amount of CTMAB. On the ground, CTMAB can be indirectly determined by determining E% of Zn(II). The results were satisfactory.

  11. New approach to optimize operational conditions for the biological treatment of a high-strength thiocyanate and ammonium waste: pH as key factor. (United States)

    Lay-Son, Meiling; Drakides, Christian


    Biological treatment of coke and steel-processing wastewaters has to satisfy both industrial economic needs and environmental protection regulations. Nevertheless, as some of the pollutants contained in these waters or produced during the treatment are highly toxic, an effective and safe treatment has proved to be difficult to obtain. This paper reports the study of a biological method for the treatment of wastewaters containing free cyanide, thiocyanate and ammonium (NH4). Laboratory-scale activated-sludge reactors were fed with a synthetic solution reproducing a steel-processing industrial wastewater and inoculated with the same industrial bacterial seeding used on-site (Ecosynergie Inc.). The results demonstrated that free cyanide and thiocyanate were efficiently degraded. Nevertheless, thiocyanate degradation and nitrification processes were actually inhibited by the free ammonia form (NH3) in place of the ionized NH4 form (NH4+) currently dosed and often unproperly named "ammonia" [IUPAC, 1997. In: McNaught, A.D., Wilkinson, A. (compilers). Compendium of Chemical Terminology. Royal Society of Chemistry, Cambridge, UK]. Optimum degradation rates were obtained for very narrow ranges of ammonia nitrogen (NH3-N) concentrations. This result can be explained by the role of pH, which mainly controls the NH3/NH4 equilibrium. Pollutants and NH3 concentrations influenced degradation rates of main pollutants. This influence was determined and expressed through elementary equations. Although the Michaelis-Menten equation could have been used to describe thiocyanate degradation, a Haldane-inhibition model was used to satisfactorily describe cyanide degradation. On the other hand, a slightly modified Haldane model was applied to describe both NH4 oxidation using NH3-N as substrate and thiocyanate degradation using NH3-N as inhibitor. These findings emphasize the role of pH on degradation rates and allow one to optimize operational conditions in the biological treatment of

  12. Sulfur and nitrogen binary doped carbon dots derived from ammonium thiocyanate for selective probing doxycycline in living cells and multicolor cell imaging. (United States)

    Xue, Mingyue; Zhang, Liangliang; Zhan, Zhihua; Zou, Mengbing; Huang, Yong; Zhao, Shulin


    A novel sulfur and nitrogen binary doped carbon dots (S,N-CDs) was synthesized by one-step manner through the hydrothermal treatment of citric acid (CA) and ammonium thiocyanate, and the procedures for biomedical applications, including probing doxycycline in living cells and multicolor cell imaging were developed. The obtained S,N-CDs are stable in aqueous solution, possess a very high quantum yield (QY, 74.15%) and good photostability. The fluorescence of S,N-CDs can be specifically quenched by doxycycline, providing a convenient turn-off assay of doxycycline. This assay shows a wide linear detection range from 0.08 to 60 μM with a low detection limit of 20 nM. The present method also displays a good selectivity. More importantly, the S,N-CDs have an excellent biocompatibility and low cytotoxicity, allowing the multicolor cell imaging and doxycycline detection in living cells. Consequently, the developed doxycycline methods is facile, low-cost, biocompatible, sensitive and selective, which may hold the potential applications in the fields of food safety and environmental monitoring, as well as cancer therapy and related mechanism research.

  13. SelectfluorTM: A novel and efficient reagent for the rapid -thiocyanation of ketones

    Indian Academy of Sciences (India)

    Dezhen Wu; Xiaojuan Yang; Liqiang Wu


    The direct α-thiocyanation of ketones with ammonium thiocyanate has been achieved using SelectfluorTM under mild and neutral conditions to produce -ketothiocyanates, in excellent yields and with high selectivity.

  14. Wet oxidation of real coke wastewater containing high thiocyanate concentration. (United States)

    Oulego, Paula; Collado, Sergio; Garrido, Laura; Laca, Adriana; Rendueles, Manuel; Díaz, Mario


    Coke wastewaters, in particular those with high thiocyanate concentrations, represent an important environmental problem because of their very low biodegradability. In this work, the treatment by wet oxidation of real coke wastewaters containing concentrations of thiocyanate above 17 mM has been studied in a 1-L semi-batch reactor at temperatures between 453 and 493 K, with total oxygen pressures in the range of 2.0-8.0 MPa. A positive effect of the matrix of real coke wastewater was observed, resulting in faster thiocyanate degradation than was obtained with synthetic wastewaters. Besides, the effect of oxygen concentration and temperature on thiocyanate wet oxidation was more noticeable in real effluents than in synthetic wastewaters containing only thiocyanate. It was also observed that the degree of mineralization of the matrix organic compounds was higher when the initial thiocyanate concentration increased. Taking into account the experimental data, kinetic models were obtained, and a mechanism implying free radicals was proposed for thiocyanate oxidation in the matrix considered. In all cases, sulphate, carbonates and ammonium were identified as the main reaction products of thiocyanate wet oxidation.

  15. Exploration Test on Gold Extraction from Arsenopyrite Gold Concentrate with Oxidation Pressure Leaching Process in Ammonium Thiocyanate-Ammonia System%某毒砂金矿硫氰酸盐氨性体系加压氧化提金探索试验

    Institute of Scientific and Technical Information of China (English)

    胡燕清; 杨声海; 陈永明


    对某毒砂金矿进行了硫氰酸盐氨性体系氧压提取金的探索试验,考察了反应温度、Cu2+浓度、浸出时间、液固比、氨水浓度、氧分压和硫氰酸铵浓度等对金浸出率的影响.结果表明,在下述优化条件下金浸出率为61.7%,即硫氰酸铵浓度3 mol/L,液固比5:1,反应温度150℃,浸出时间6h,搅拌速度750r/min,氨水浓度4.64 mo/L,铜加入量1.5 g/L.而经400℃焙烧预处理后金浸出率达到86.2%.%The exploration test on gold extraction from arsenopyrite gold concentrate with oxidation pressure leaching process in ammonium thiocyanate-ammonia system was performed. The effects of leaching temperature,copper concentration, leaching time, ratio of liquid to solid (L/S), ammonia concentration, oxygen pressure, and the concentration of ammonium thiocyanate on gold leaching rate were studied. The results show that the gold leaching ratio is 61. 7% under the optimum conditions including NH4SCN concentration of 3 mol/L, L/S=5, leaching temperature of 150 °C , leaching time of 6 hours, stirring speed of 750 r/min, ammonia concentration of 4. 64 mol/L, and copper dosage of 1. 5 g/L. The gold leaching ratio can leach 86. 2% after the pretreatment of roasting at 400℃.

  16. 氯化钠-正丙醇-硫氰酸铵-水体系析相萃取分离和富集锡(Ⅳ)%Separation and enrichment of stannum (Ⅳ) by phase extraction in sodium chloride-1-propanol-ammonium thiocyanate-water system

    Institute of Scientific and Technical Information of China (English)

    李玉玲; 陈彬; 马万山


    The behavior and conditions for extraction separation and enrichment of stannum (Ⅳ) from other metal ions in sodium chloride-1-propanol-ammonium thiocyanate-water system were investigated.The results showed that 1-propanol aqueous solution could be well divided into two phases in presence of sodium chloride.During the phase separation process,[Sn(SCN)5~6] [(5~6)-4]-formed from stannum (Ⅳ) and ammonium thiocyanate could reacted with protonized 1-propanol of C3H7OH2 + to form associated complex of [Sn(SCN)5~6][C3 H7OH2]1-2,which could be fully extracted by 1-propanol phase.When acidity of the solution was fixed at pH 2.0,and the concentration of 1-propanol,ammonium thiocyanate and sodium chloride was 30%(V/V),0.09 mol/L and 0.17 g/mL,respectively,the extraction yield of stannum(Ⅳ) was more than 98.3%.Simultaneously,Fe(Ⅱ),Ni(Ⅱ),Pb(Ⅱ),Al (Ⅲ),Mg(Ⅱ),Mn(Ⅱ),Ce(Ⅲ),Cr(Ⅲ),Zn(Ⅱ),Ag(Ⅰ),Cd(Ⅱ)and V(V) could not be extracted,realizing the separation of stannum (Ⅳ) from these metal ions.The method has been applied to the separation and determination of stannum (Ⅳ) in Pb-Ca-Sn-Al alloy sample with recovery of 97.4% and relative standard deviation(n=7) of 2.1%.%研究了氯化钠-正丙醇-硫氰酸铵-水体系析相萃取分离和富集Sn(Ⅳ)的行为及与一些金属离子分离的条件.结果表明,氯化钠能使正丙醇的水溶液分成两相,在分相过程中,Sn(Ⅳ)和硫氰酸铵生成的[Sn(SCN)5~6][(5~6)-4]-与质子化正丙醇C3H7OH2+形成的缔合物[Sn (SCN)5~6][C3H7OH2]1-2能被正丙醇相完全萃取.固定溶液酸度为pH 2,当正丙醇、硫氰酸铵和氯化钠的浓度分别为30% (V/V)、0.09 mol/L和0.17 g/mL时,Sn(Ⅳ)的萃取率在98.3%以上,Fe(Ⅱ)、Ni(Ⅱ)、Pb(Ⅱ)、Al(Ⅲ)、Mg(Ⅱ)、Mn(Ⅱ)、Ce(Ⅲ)、Cr(Ⅲ)、Zn(Ⅱ)、Ag(Ⅰ)、Cd(Ⅱ)和V(Ⅴ)不被萃取,实现了Sn(Ⅳ)与上述金属离子的分离.方法用于Pb-Ca-Sn-Al合金中Sn的分离和测定,平均回收率为97.4

  17. Flow-through Bulk Optode for Spectrophotometric Determination of Thiocyanate and Its Application to Water and Saliva Analysis

    Directory of Open Access Journals (Sweden)

    José Fernández


    Full Text Available A flow-through spectrophotometric bulk optode for the flow-injectiondetermination of thiocyanate is described. As active constituents, the optode incorporatesthe lipophilized pH indicator 5-octadecanoyloxy-2-(4-nitrophenylazophenol andmethyltridodecyl ammonium chloride, dissolved in a plasticized poly(vinylchloridemembrane entrapped in a cellulose support. The optode is applied, in conjunction with theflow injection technique, to the determination of thiocyanate at pH 7.5 (TRIS/H2SO4. Thesensor is readily regenerated with a 10-2 M NaOH carrier solution. The analyticalcharacteristics of this optode with respect to thiocyanate response time, dynamicmeasurement range, reproducibility and selectivity are discussed. The proposed FI methodis applied to the determination of thiocyanate in waters from different sources and in humansaliva samples in order to distinguish between smokers and non-smokers.

  18. Microbial thiocyanate utilization under highly alkaline conditions. (United States)

    Sorokin, D Y; Tourova, T P; Lysenko, A M; Kuenen, J G


    Three kinds of alkaliphilic bacteria able to utilize thiocyanate (CNS-) at pH 10 were found in highly alkaline soda lake sediments and soda soils. The first group included obligate heterotrophs that utilized thiocyanate as a nitrogen source while growing at pH 10 with acetate as carbon and energy sources. Most of the heterotrophic strains were able to oxidize sulfide and thiosulfate to tetrathionate. The second group included obligately autotrophic sulfur-oxidizing alkaliphiles which utilized thiocyanate nitrogen during growth with thiosulfate as the energy source. Genetic analysis demonstrated that both the heterotrophic and autotrophic alkaliphiles that utilized thiocyanate as a nitrogen source were related to the previously described sulfur-oxidizing alkaliphiles belonging to the gamma subdivision of the division Proteobacteria (the Halomonas group for the heterotrophs and the genus Thioalkalivibrio for autotrophs). The third group included obligately autotrophic sulfur-oxidizing alkaliphilic bacteria able to utilize thiocyanate as a sole source of energy. These bacteria could be enriched on mineral medium with thiocyanate at pH 10. Growth with thiocyanate was usually much slower than growth with thiosulfate, although the biomass yield on thiocyanate was higher. Of the four strains isolated, the three vibrio-shaped strains were genetically closely related to the previously described sulfur-oxidizing alkaliphiles belonging to the genus Thioalkalivibrio. The rod-shaped isolate differed from the other isolates by its ability to accumulate large amounts of elemental sulfur inside its cells and by its ability to oxidize carbon disulfide. Despite its low DNA homology with and substantial phenotypic differences from the vibrio-shaped strains, this isolate also belonged to the genus Thioalkalivibrio according to a phylogenetic analysis. The heterotrophic and autotrophic alkaliphiles that grew with thiocyanate as an N source possessed a relatively high level of cyanase

  19. Evidence for thiocyanate-sensitive peroxidase activity in human saliva.


    Cowman, R A; Baron, S S; Obenauf, S D; Byrnes, J J


    A procedure was developed for determining the relative levels of lactoperoxidase, leukocyte myeloperoxidase, and thiocyanate-sensitive peroxidase in human saliva. With this procedure, most of the peroxidase activity in whole saliva from normal (those without cancer) subjects was found to be associated with lactoperoxidase and thiocyanate-sensitive peroxidase, with only a minor contribution from leukocyte myeloperoxidase. In contrast, thiocyanate-sensitive peroxidase and leukocyte myeloperoxid...

  20. A novel pink-pigmented facultative methylotroph, Methylobacterium thiocyanatum sp. nov., capable of growth on thiocyanate or cyanate as sole nitrogen sources. (United States)

    Wood, A P; Kelly, D P; McDonald, I R; Jordan, S L; Morgan, T D; Khan, S; Murrell, J C; Borodina, E


    The isolation and properties of a novel species of pink-pigmented methylotroph, Methylobacterium thiocyanatum, are described. This organism satisfied all the morphological, biochemical, and growth-substrate criteria to be placed in the genus Methylobacterium. Sequencing of the gene encoding its 16S rRNA confirmed its position in this genus, with its closest phylogenetic relatives being M. rhodesianum, M. zatmanii and M. extorquens, from which it differed in its ability to grow on several diagnostic substrates. Methanol-grown organisms contained high activities of hydroxypyruvate reductase -3 micromol NADH oxidized min-1 (mg crude extract protein)-1], showing that the serine pathway was used for methylotrophic growth. M. thiocyanatum was able to use thiocyanate or cyanate as the sole source of nitrogen for growth, and thiocyanate as the sole source of sulfur in the absence of other sulfur compounds. It tolerated high concentrations (at least 50 mM) of thiocyanate or cyanate when these were supplied as nitrogen sources. Growing cultures degraded thiocyanate to produce thiosulfate as a major sulfur end product, apparently with the intermediate formation of volatile sulfur compounds (probably hydrogen sulfide and carbonyl sulfide). Enzymatic hydrolysis of thiocyanate by cell-free extracts was not demonstrated. Cyanate was metabolized by means of a cyanase enzyme that was expressed at approximately sevenfold greater activity during growth on thiocyanate [Vmax 634 +/- 24 nmol NH3 formed min-1 (mg protein)-1] than on cyanate [89 +/- 9 nmol NH3 min-1 (mg protein)-1]. Kinetic study of the cyanase in cell-free extracts showed the enzyme (1) to exhibit high affinity for cyanate (Km 0.07 mM), (2) to require bicarbonate for activity, (3) to be subject to substrate inhibition by cyanate and competitive inhibition by thiocyanate (Ki 0.65 mM), (4) to be unaffected by 1 mM ammonium chloride, (5) to be strongly inhibited by selenocyanate, and (6) to be slightly inhibited by 5 m

  1. Thiocyanate hydrolase, the primary enzyme initiating thiocyanate degradation in the novel obligately chemolithoautotrophic halophilic sulfur-oxidizing bacterium Thiohalophilus thiocyanoxidans. (United States)

    Bezsudnova, Ekaterina Yu; Sorokin, Dimitry Yu; Tikhonova, Tamara V; Popov, Vladimir O


    Thiohalophilus thiocyanoxidans is a first halophilic sulfur-oxidizing chemolithoautotrophic bacterium capable of growth with thiocyanate as an electron donor at salinity up to 4 M NaCl. The cells, grown with thiocyanate, but not with thiosulfate, contained an enzyme complex hydrolyzing thiocyanate to sulfide and ammonia under anaerobic conditions with carbonyl sulfide as an intermediate. Despite the fact of utilization of the , high cyanase activity was also detected in thiocyanate-induced cells. Three-stage column chromotography resulted in a highly purified thiocyanate-hydrolyzing protein with an apparent molecular mass of 140 kDa that consists of three subunits with masses 17, 19 and 29 kDa. The enzyme is a Co,Fe-containing protein resembling on its function and subunit composition the enzyme thiocyanate hydrolase from the Betaproteobacterium Thiobacillus thioparus. Cyanase, copurified with thiocyanate hydrolase, is a bisubstrate multisubunit enzyme with an apparent subunit molecular mass of 14 kDa. A possible role of cyanase in thiocyanate degradation by T. thiocyanoxidans is discussed.

  2. Adsorption removal of thiocyanate from aqueous solution by calcined hydrotalcite. (United States)

    Li, Yu-Jiang; Yang, Min; Zhang, Xiao-Jin; Wu, Tao; Cao, Nan; Wei, Na; Bi, Yan-Jun; Wang, Jing


    A hydrotalcite with Mg/Al molar ratio 2 was prepared by co-precipitation method and was characterized by XRD, TG/DTA, Zeta potential and BET surface area. The hydrotalcite was calcined at 500 degrees C, with the dehydration from interlayer, the dehydroxilation from the brucite-like layer and the decomposition of carbonate successively, transformed into the mixed oxide type. The removal of thiocyanate from aqueous solution by using the original hydrotalcite and calcined hydrotalcite (HTC-500) was investigated. The results showed that the thiocyanate adsorption capacity of calcined hydrotalcite was much higher than that of the original form. Calcined hydrotalcite was particularly effective at removing thiocyanate, and that the effective range of pH for the thiocyanate removal are between 5.5-10.0. The experimental data of thiocyanate removal fit nicely with Langmuir isotherm, and the saturated adsorption uptake was 96.2 mg SCN-/g HTC-500. The adsorption of thiocyanate by calcined hydrotalcite follows first-order kinetics. And the intercalation to the structure recovery for calcined hydrotalcite. But the presence of additional anions could affect the adsorption behavior of thiocyanate.

  3. General and practical formation of thiocyanates from thiols. (United States)

    Frei, Reto; Courant, Thibaut; Wodrich, Matthew D; Waser, Jerome


    A new method for the cyanation of thiols and disulfides using cyanobenziodoxol(on)e hypervalent iodine reagents is described. Both aliphatic and aromatic thiocyanates can be accessed in good yields in a few minutes at room temperature starting from a broad range of thiols with high chemioselectivity. The complete conversion of disulfides to thiocyanates was also possible. Preliminary computational studies indicated a low energy concerted transition state for the cyanation of the thiolate anion or radical. The developed thiocyanate synthesis has broad potential for various applications in synthetic chemistry, chemical biology and materials science.

  4. New Solvents for Cellulose. II. Ethylenediamine/Thiocyanate Salt System


    HATTORI, Kazuyuki; ABE, Emiko; Yoshida, Takashi; CUCULO, John A.; 服部,和幸; 吉田, 孝


    The ethylenediamine/thiocyanate salt system was found to be a new solvent for cellulose. The solubility, dissolution behavior, solution properties, and cellulose recovered from the solutions were investigated. The dissolution took place at room temperature, and the maximum solubility achieved was 16% (w/w) for cellulose of DP210 in the ethylenediamine/sodium thiocyanate 54/46 (w/w).The dependence of cellulose solubility on DP is also described. Tracing the dissolution behavior of the cellulos...

  5. Adsorption removal of thiocyanate from aqueous solution by calcined hydrotalcite

    Institute of Scientific and Technical Information of China (English)

    LI Yu-jiang; YANG Min; ZHANG Xiao-jin; WU Tao; CAO Nan; WEI Na; BI Yan-jun; WANG Jing


    A hydrotalcite with Mg/Al molar ratio 2 was prepared by co-precipitation method and was characterized by XRD,TG/DTA, Zeta potential and BET surface area. The hydrotalcite was calcined at 500℃, with the dehydration from interlayer, the dehydroxilation from the brucite-like layer and the decomposition of carbonate successively, transformed into the mixed oxide type.The removal of thiocyanate from aqueous solution by using the original hydrotalcite and calcined hydrotalcite (HTC-500) was investigated. The results showed that the thiocyanate adsorption capacity of calcined hydrotalcite was much higher than that of the original form. Calcined hydrotalcite was particularly effective at removing thiocyanate, and that the effective range of pH for the thiocyanate removal are between 5.5-10.0. The experimental data of thiocyanate removal fit nicely with Langmuir isotherm, and the saturated adsorption uptake was 96.2 mg SCN-/g HTC-500. The adsorption ofthiocyanate by calcined hydrotalcite follows first-order kinetics. And the intercalation to the structure recovery for calcined hydrotalcite. But the presence of additional anions could affect the adsorption behavior of thiocyanate.

  6. Thiocyanate-capped nanocrystal colloids: vibrational reporter of surface chemistry and solution-based route to enhanced coupling in nanocrystal solids. (United States)

    Fafarman, Aaron T; Koh, Weon-kyu; Diroll, Benjamin T; Kim, David K; Ko, Dong-Kyun; Oh, Soong Ju; Ye, Xingchen; Doan-Nguyen, Vicky; Crump, Michael R; Reifsnyder, Danielle C; Murray, Christopher B; Kagan, Cherie R


    Ammonium thiocyanate (NH(4)SCN) is introduced to exchange the long, insulating ligands used in colloidal nanocrystal (NC) synthesis. The short, air-stable, environmentally benign thiocyanate ligand electrostatically stabilizes a variety of semiconductor and metallic NCs in polar solvents, allowing solution-based deposition of NCs into thin-film NC solids. NH(4)SCN is also effective in replacing ligands on NCs after their assembly into the solid state. The spectroscopic properties of this ligand provide unprecedented insight into the chemical and electronic nature of the surface of the NCs. Spectra indicate that the thiocyanate binds to metal sites on the NC surface and is sensitive to atom type and NC surface charge. The short, thiocyanate ligand gives rise to significantly enhanced electronic coupling between NCs as evidenced by large bathochromic shifts in the absorption spectra of CdSe and CdTe NC thin films and by conductivities as high as (2 ± 0.7) × 10(3) Ω(-1) cm(-1) for Au NC thin films deposited from solution. NH(4)SCN treatment of PbTe NC films increases the conductivity by 10(13), allowing the first Hall measurements of nonsintered NC solids, with Hall effect mobilities of 2.8 ± 0.7 cm(2)/(V·s). Thiocyanate-capped CdSe NC thin films form photodetectors exhibiting sensitive photoconductivity of 10(-5) Ω(-1) cm(-1) under 30 mW/cm(2) of 488 nm illumination with I(photo)/I(dark) > 10(3) and form n-channel thin-film transistors with electron mobilities of 1.5 ± 0.7 cm(2)/(V·s), a current modulation of >10(6), and a subthreshold swing of 0.73 V/decade.

  7. [Mechanism of cyanide and thiocyanate decomposition by an association of Pseudomonas putida and Pseudomonas stutzeri strains]. (United States)

    Grigor'eva, N V; Kondrat'eva, T F; Krasil'nikova, E N; Karavaĭko, G I


    The intermediate and terminal products of cyanide and thiocyanate decomposition by individual strains of the genus Pseudomonas, P. putida strain 21 and P. stutzeri strain 18, and by their association were analyzed. The activity of the enzymes of nitrogen and sulfur metabolism in these strains was compared with that of the collection strains P. putida VKM B-2187T and P. stutzeri VKM B-975T. Upon the introduction of CN- and SCN- into cell suspensions of strains 18 and 21 in phosphate buffer (pH 8.8), the production of NH4+ was observed. Due to the high rate of their utilization, NH3, NH4+, and CNO- were absent from the culture liquids of P. putida strain 21 and P. stutzeri strain 18 grown with CN- or SCN-. Both Pseudomonas strains decomposed SCN- via cyanate production. The cyanase activity was 0.75 micromol/(min mg protein) for P. putida strain 21 and 1.26 micromol/(min mg protein) for P. stutzeri strain 18. The cyanase activity was present in the cells grown with SCN- but absent in cells grown with NH4+. Strain 21 of P. putida was a more active CN- decomposer than strain 18 of P. stutzeri. Ammonium and CO2 were the terminal nitrogen and carbon products of CN- and SCN- decomposition. The terminal sulfur products of SCN- decomposition by P. stutzeri strain 18 and P. putida strain 21 were thiosulfate and tetrathionate, respectively. The strains utilized the toxic compounds in the anabolism only, as sources of nitrogen (CN- and SCN-) and sulfur (SCN-). The pathway of thiocyanate decomposition by the association of bacteria of the genus Pseudomonas is proposed based on the results obtained.

  8. Removal of phenols, thiocyanate and ammonium from coal gasification wastewater using moving bed biofilm reactor. (United States)

    Li, Hui-qiang; Han, Hong-jun; Du, Mao-an; Wang, Wei


    A laboratory-scale moving bed biofilm reactor (MBBR) with a volume of 4 L was used to study the biodegradation of coal gasification wastewater. Maximum removal efficiencies of 81%, 89%, 94% and 93% were obtained for COD, phenols, SCN(-) and NH(4)(+)-N, respectively. NO(2)(-)-N accumulation induced increase of effluent COD concentration when the hydraulic residence time (HRT) decreased. Phenols removal was not affected when the HRT decreased from 48 to 32 h. Effluent SCN(-) and NH(4)(+)-N concentration increased with the decrease of the HRT, and decreased gradually when the HRT returned to 48 h. Batch experiments were carried out to study performance of the suspended and attached growth biomass in the MBBR.

  9. Removal of phenols, thiocyanate and ammonium from coal gasification wastewater using moving bed biofilm reactor

    Energy Technology Data Exchange (ETDEWEB)

    Li, H.Q.; Han, H.J.; Du, M.A.; Wang, W. [Harbin Institute of Technology, Harbin (China)


    A laboratory-scale moving bed biofilm reactor (MBBR) with a volume of 4 L was used to study the biodegradation of coal gasification wastewater. Maximum removal efficiencies of 81%, 89%, 94% and 93% were obtained for COD, phenols, SCN{sup -} and NH{sub 4}{sup +}-N, respectively. NO{sub 2}{sup -}-N accumulation induced increase of effluent COD concentration when the hydraulic residence time (HRT) decreased. Phenols removal was not affected when the HRT decreased from 48 to 32 h. Effluent SCN{sup -} and NH{sub 4}{sup +}-N concentration increased with the decrease of the HRT, and decreased gradually when the HRT returned to 48 h. Batch experiments were carried out to study performance of the suspended and attached growth biomass in the MBBR.

  10. Accelerated corrosion of stainless steel in thiocyanate-containing solutions

    Energy Technology Data Exchange (ETDEWEB)

    Pistorius, P Chris; Li, Wen


    It is known that reduced sulfur compounds (such as thiocyanate and thiosulfate) can accelerate active corrosion of austenitic stainless steel in acid solutions, but before we started this project the mechanism of acceleration was largely unclear. This work combined electrochemical measurements and analysis using scanning electron microscopy (SEM) and X-ray photo-electron spectroscopy (XPS), which provided a comprehensive understanding of the catalytic effect of reduced sulfur species on the active corrosion of stainless steel. Both the behavior of the pure elements and the steel were studied and the work focused on the interaction between the pure elements of the steel, which is the least understood area. Upon completion of this work, several aspects are now much clearer. The main results from this work can be summarized as follows: The presence of low concentrations (around 0.1 mM) of thiocyanate or tetrathionate in dilute sulfuric acid greatly accelerates the anodic dissolution of chromium and nickel, but has an even stronger effect on stainless steels (iron-chromium-nickel alloys). Electrochemical measurements and surface analyses are in agreement with the suggestion that accelerated dissolution really results from suppressed passivation. Even well below the passivation potential, the electrochemical signature of passivation is evident in the electrode impedance; the electrode impedance shows clearly that this pre-passivation is suppressed in the presence of thiocyanate. For the stainless steels, remarkable changes in the morphology of the corroded metal surface and in the surface concentration of chromium support the suggestion that pre-passivation of stainless steels is suppressed because dissolution of chromium is accelerated. Surface analysis confirmed that adsorbed sulfur / sulfide forms on the metal surfaces upon exposure to solutions containing thiocyanate or thiosulfate. For pure nickel, and steels containing nickel (and residual copper), bulk sulfide

  11. Coordination Chemistry of Homoleptic Actinide(IV)-Thiocyanate Complexes. (United States)

    Carter, Tyler J; Wilson, Richard E


    The synthesis, X-ray crystal structure, vibrational and optical spectroscopy for the eight-coordinate thiocyanate compounds, [Et4 N]4 [Pu(IV) (NCS)8 ], [Et4 N]4 [Th(IV) (NCS)8 ], and [Et4 N]4 [Ce(III) (NCS)7 (H2 O)] are reported. Thiocyanate was found to rapidly reduce plutonium to Pu(III) in acidic solutions (pHcoordination in acetonitrile based on the observation of intense ligand-to-metal charge-transfer bands. Spectroscopic and crystallographic data do not support the interaction of the metal orbitals with the ligand π system, but support an enhanced An(IV) -NCS interaction, as the Lewis acidity of the metal ion increases from Th to Pu.

  12. Thiocyanate concentration in saliva of cystic fibrosis patients.

    Directory of Open Access Journals (Sweden)

    Marek Gacko


    Full Text Available Thiocyanates (SCN- are ubiquitous in nature. There are indispensable part of host defense system that act as a substrate for lactoperoxidase (LPO. In our study we present initial data on SCN- concentration in saliva of CF patients in comparison to healthy non-smokers and healthy smokers. 5 ml of saliva was collected from each subject to a sterile tube and thiocyanate concentration was measured in each sample. The results of the measurements are presented on Fig. 1. Mean concentration of SCN- in saliva of CF patients was 0.031 +/- 0.0052 g/l, in healthy non-smokers 0.039 +/- 0.0048 g/l and in healthy smokers 0.048 +/- 0.0161 g/l. The differences between each group were statistically significant. Studies on larger group of patients and probably on different material (BALF or induced sputum should present interesting data complementing the in vitro studies.

  13. DBC solvent extraction of U(VI) from thiocyanate medium

    Institute of Scientific and Technical Information of China (English)


    The extraction behavior of uranium(VI) from thiocyanate medium with dibenzo-18-crown-6 (DBC) in nitrobenzene and the effects of alkali cations on the extraction were investigated. The results showed that the uranium (VI) can be effectively extracted in the presence of potassium cation, uranium (VI) is extracted as complex anionic species UO2(SCN)-3, and the stoichiometry of the extracted complex is KUO2(SCN)32DBC(o).

  14. Recent advances in the chemistry of organic thiocyanates. (United States)

    Castanheiro, Thomas; Suffert, Jean; Donnard, Morgan; Gulea, Mihaela


    Organic thiocyanates are important synthetic intermediates to access valuable sulfur-containing compounds. In this review the different methods for their preparation and their synthetic applications will be presented. The literature of the last 15 years will be covered, highlighting selected recent advances in the chemistry of this class of compounds. We hope to offer chemists the tools to have a good grasp of this singular functionality and open the door to further progress in this chemistry.

  15. Bioreactor microbial ecosystems for thiocyanate and cyanide degradation unravelled with genome-resolved metagenomics. (United States)

    Kantor, Rose S; van Zyl, A Wynand; van Hille, Robert P; Thomas, Brian C; Harrison, Susan T L; Banfield, Jillian F


    Gold ore processing uses cyanide (CN(-) ), which often results in large volumes of thiocyanate- (SCN(-) ) contaminated wastewater requiring treatment. Microbial communities can degrade SCN(-) and CN(-) , but little is known about their membership and metabolic potential. Microbial-based remediation strategies will benefit from an ecological understanding of organisms involved in the breakdown of SCN(-) and CN(-) into sulfur, carbon and nitrogen compounds. We performed metagenomic analysis of samples from two laboratory-scale bioreactors used to study SCN(-) and CN(-) degradation. Community analysis revealed the dominance of Thiobacillus spp., whose genomes harbour a previously unreported operon for SCN(-) degradation. Genome-based metabolic predictions suggest that a large portion of each bioreactor community is autotrophic, relying not on molasses in reactor feed but using energy gained from oxidation of sulfur compounds produced during SCN(-) degradation. Heterotrophs, including a bacterium from a previously uncharacterized phylum, compose a smaller portion of the reactor community. Predation by phage and eukaryotes is predicted to affect community dynamics. Genes for ammonium oxidation and denitrification were detected, indicating the potential for nitrogen removal, as required for complete remediation of wastewater. These findings suggest optimization strategies for reactor design, such as improved aerobic/anaerobic partitioning and elimination of organic carbon from reactor feed.

  16. Insensitive Ammonium Nitrate. (United States)

    is reduced by replacing the ammonium nitrate with a solid solution of potassium nitrate in form III ammonium nitrate wherein the potassium nitrate...constitutes from more than zero to less than 50 weight percent of the solid solution . (Author)

  17. CuI-catalyzed Synthesis of Aryl Thiocyanates from Aryl Iodides

    Institute of Scientific and Technical Information of China (English)

    Ye Feng WANG; Yuan ZHOU; Jia Rui WANG; Lei LIU; Qing Xiang GUO


    An operationally simple and inexpensive catalyst system was developed for the cross coupling of potassium thiocyanate with aryl iodides by using CuI as catalyst, 1, 10-phenanthroline as ligand, and tetraethylammonium iodide as activator. The procedure is applicable for the synthesis of diverse aryl thiocyanates without any exotic, poisonous reagents.

  18. 76 FR 22904 - Ferm Solutions, Inc.; Filing of Food Additive Petition (Animal Use); Erythromycin Thiocyanate (United States)


    ... (Animal Use); Erythromycin Thiocyanate AGENCY: Food and Drug Administration, HHS. ACTION: Notice. SUMMARY... (21 CFR part 573) to provide for the safe use of erythromycin thiocyanate as an antimicrobial... proposing that the food additive regulations be amended to provide for the safe use of...

  19. Structural and mechanical studies of cadmium manganese thiocyanate crystal (United States)

    Manikandan, M. R.; Vijayaprasath, G.; babu, G. Anandha; Bhagavannarayan, G.; Vijayan, N.; Ravi, G.


    Single crystals of cadmium manganese thiocyanate (CMTC) have been synthesized successfully and grown by slow evaporation method. The structural perfection of the grown crystals has been analyzed by High resolution X-ray diffraction (HRXRD), which shows the crystalline perfection of the grown crystal is quite good. Optical behavior was assessed by UV-Vis analysis and found that no absorption in the UV visible region and it may be useful for second harmonic applications. The mechanical hardness of the grown crystals was studied and Vicker's microhardness, Stiffness constant was calculated.

  20. Binding of thiocyanate to lactoperoxidase: 1H and 15N nuclear magnetic resonance studies

    Energy Technology Data Exchange (ETDEWEB)

    Modi, S.; Behere, D.V.; Mitra, S. (Tata Institute of Fundamental Research, Bombay (India))


    The binding of thiocyanate to lactoperoxidase (LPO) has been investigated by 1H and 15N NMR spectroscopy. 1H NMR of LPO shows that the major broad heme methyl proton resonance at about 61 ppm is shifted upfield by addition of the thiocyanate, indicating binding of the thiocyanate to the enzyme. The pH dependence of line width of 15N resonance of SC15N- in the presence of the enzyme has revealed that the binding of the thiocyanate to the enzyme is facilitated by protonation of an ionizable group (with pKa of 6.4), which is presumably distal histidine. Dissociation constants (KD) of SC15N-/LPO, SC15N-/LPO/I-, and SC15N-/LPO/CN- equilibria have been determined by 15N T1 measurements and found to be 90 +/- 5, 173 +/- 20, and 83 +/- 6 mM, respectively. On the basis of these values of KD, it is suggested that the iodide ion inhibits the binding of the thiocyanate but cyanide ion does not. The thiocyanate is shown to bind at the same site of LPO as iodide does, but the binding is considerably weaker and is away from the ferric ion. The distance of 15N of the bound thiocyanate ion from the iron is determined to be 7.2 +/- 0.2 A from the 15N T1 measurements.

  1. Elevated ammonium levels

    DEFF Research Database (Denmark)

    Søgaard, Rikke; Novak, Ivana; MacAulay, Nanna


    ]glutamate uptake and glutamate transport currents but had no effect on EAAT2. The maximal EAAT3-mediated glutamate transport current was increased but the apparent affinities for glutamate and Na(+) were unaltered. Ammonium did not affect EAAT3-mediated transient currents, indicating that EAAT3 surface expression...... was not enhanced. The ammonium-induced stimulation of EAAT3 increased with increasing extracellular pH, suggesting that the gaseous form NH(3) mediates the effect. An ammonium-induced intracellular alkalinization was excluded as the cause of the enhanced EAAT3 activity because 1) ammonium acidified the oocyte...... cytoplasm, 2) intracellular pH buffering with MOPS did not reduce the stimulation, and 3) ammonium enhanced pH-independent cysteine transport. Our data suggest that the ammonium-elicited uptake stimulation is not caused by intracellular alkalinization or changes in the concentrations of cotransported ions...

  2. Thiocyanate in food and iodine in milk: From domestic animal feeding to improved understanding of cretinism

    DEFF Research Database (Denmark)

    Laurberg, P.; Andersen, S.; Knudsen, N.


    of their breastfed children. Second, iodine in dairy products provides a considerable part of iodine intake in many populations. Thiocyanate from rapeseed feeding of cows decreases milk iodine content, probably by competitive inhibition of NIS in the mammary gland. Alterations in feeding of dairy cows may alter...... the iodine content of consumer milk, and this may influence the risk of thyroid diseases in the population. Thiocyanate inhibition of iodine transport into milk may also be operative in humans with a high thiocyanate intake. This could further impair iodine status in breastfed children in low-iodine intake...

  3. Uric acid and thiocyanate as competing substrates of lactoperoxidase. (United States)

    Seidel, Antonia; Parker, Heather; Turner, Rufus; Dickerhof, Nina; Khalilova, Irada S; Wilbanks, Sigurd M; Kettle, Anthony J; Jameson, Guy N L


    The physiological function of urate is poorly understood. It may act as a danger signal, an antioxidant, or a substrate for heme peroxidases. Whether it reacts sufficiently rapidly with lactoperoxidase (LPO) to act as a physiological substrate remains unknown. LPO is a mammalian peroxidase that plays a key role in the innate immune defense by oxidizing thiocyanate to the bactericidal and fungicidal agent hypothiocyanite. We now demonstrate that urate is a good substrate for bovine LPO. Urate was oxidized by LPO to produce the electrophilic intermediates dehydrourate and 5-hydroxyisourate, which decayed to allantoin. In the presence of superoxide, high yields of hydroperoxides were formed by LPO and urate. Using stopped-flow spectroscopy, we determined rate constants for the reaction of urate with compound I (k1 = 1.1 × 10(7) M(-1) s(-1)) and compound II (k2 = 8.5 × 10(3) M(-1) s(-1)). During urate oxidation, LPO was diverted from its peroxidase cycle because hydrogen peroxide reacted with compound II to give compound III. At physiologically relevant concentrations, urate competed effectively with thiocyanate, the main substrate of LPO for oxidation, and inhibited production of hypothiocyanite. Similarly, hypothiocyanite-dependent killing of Pseudomonas aeruginosa was inhibited by urate. Allantoin was present in human saliva and associated with the concentration of LPO. When hydrogen peroxide was added to saliva, oxidation of urate was dependent on its concentration and peroxidase activity. Our findings establish urate as a likely physiological substrate for LPO that will influence host defense and give rise to reactive electrophilic metabolites.

  4. Phosphine-free conversion of alcohols into alkyl thiocyanates using trichloroisocyanuric acid/NH4SCN

    Institute of Scientific and Technical Information of China (English)

    Roya Azadi; Babak Mokhtari; Mohamad-Ali Makaremi


    A convenient and efficient phosphine-free procedure for the one-pot conversion of primary,secondary and tertiary alcohols into the corresponding alkyl thiocyanates or alkyl isothiocyanates is described using trichloroisocyanuric acid/NH4SCN.

  5. Unique stress response to the lactoperoxidase-thiocyanate enzyme system in Escherichia coli. (United States)

    Sermon, Jan; Vanoirbeek, Kristof; De Spiegeleer, Philipp; Van Houdt, Rob; Aertsen, Abram; Michiels, Chris W


    Using a differential fluorescence induction approach, we screened a promoter trap library constructed in a vector with a promoterless gfp gene for Escherichia coli MG1655 promoters that are induced upon challenge with the antimicrobial lactoperoxidase-thiocyanate enzyme system. None of the thirteen identified lactoperoxidase-inducible open reading frames was inducible by H(2)O(2) or by the superoxide generator plumbagin. However, analysis of specific promoters of known stress genes showed some of these, including recA, dnaK and sodA, to be inducible by the lactoperoxidase-thiocyanate enzyme system. The results show that the lactoperoxidase-thiocyanate enzyme system elicits a distinct stress response different from but partly overlapping other oxidative stress responses. Several of the induced genes or pathways may be involved in bacterial defense against the toxic effects of the lactoperoxidase-thiocyanate enzyme system.

  6. Comparative Genome Analysis of Three Thiocyanate Oxidizing Thioalkalivibrio Species Isolated from Soda Lakes (United States)

    Berben, Tom; Overmars, Lex; Sorokin, Dimitry Y.; Muyzer, Gerard


    Thiocyanate is a C1 compound containing carbon, nitrogen, and sulfur. It is a (by)product in a number of natural and industrial processes. Because thiocyanate is toxic to many organisms, including humans, its removal from industrial waste streams is an important problem. Although a number of bacteria can use thiocyanate as a nitrogen source, only a few can use it as an electron donor. There are two distinct pathways to use thiocyanate: (i) the “carbonyl sulfide pathway,” which has been extensively studied, and (ii) the “cyanate pathway,” whose key enzyme, thiocyanate dehydrogenase, was recently purified and studied. Three species of Thioalkalivibrio, a group of haloalkaliphilic sulfur-oxidizing bacteria isolated from soda lakes, have been described as thiocyanate oxidizers: (i) Thioalkalivibrio paradoxus (“cyanate pathway”), (ii) Thioalkalivibrio thiocyanoxidans (“cyanate pathway”) and (iii) Thioalkalivibrio thiocyanodenitrificans (“carbonyl sulfide pathway”). In this study we provide a comparative genome analysis of these described thiocyanate oxidizers, with genomes ranging in size from 2.5 to 3.8 million base pairs. While focusing on thiocyanate degradation, we also analyzed the differences in sulfur, carbon, and nitrogen metabolism. We found that the thiocyanate dehydrogenase gene is present in 10 different Thioalkalivibrio strains, in two distinct genomic contexts/genotypes. The first genotype is defined by having genes for flavocytochrome c sulfide dehydrogenase upstream from the thiocyanate dehydrogenase operon (present in two strains including the type strain of Tv. paradoxus), whereas in the second genotype these genes are located downstream, together with two additional genes of unknown function (present in eight strains, including the type strains of Tv. thiocyanoxidans). Additionally, we found differences in the presence/absence of genes for various sulfur oxidation pathways, such as sulfide:quinone oxidoreductase, dissimilatory

  7. A facile and convenient method for synthesis of alkyl thiocyanates under homogeneous phase transfer catalyst conditions

    Institute of Scientific and Technical Information of China (English)

    Ali Reza Kiasat; Rashid Badri; Soheil Sayyahi


    A simple and environmentally friendly method is described for the efficient conversion of alkyl halide to alkyl thiocyanate using tetrabutylammonium bromide (TBAB) as a phase transfer catalyst.The reactions occur in water and furnish the corresponding alkyl thiocyanate in high yields.No evidence for the formation of isothiocyanates as by-product of the reaction was observed and the products were obtained in pure form without further purification.

  8. [Determination of iodide, thiocyanate and perchlorate ions in environmental water by two-dimensional ion chromatography]. (United States)

    Lin, Li; Wang, Haibo; Shi, Yali


    A procedure for the determination of iodide, thiocyanate and perchlorate ions in environmental water by two-dimensional ion chromatography has been developed. At first the iodide, thiocyanate and perchlorate ions were separated from interfering ions by a column (IonPac AS16, 250 mm x 4 mm). The iodide ion, thiocyanate and perchlorate ions were then enriched with an enrichment column (MAC-200, 80 mm x 0.75 mm). In the 2nd-dimensional chromatography, iodide thiocyanate and perchlorate ions were separated and quantified by a capillary column (IonPac AS20 Capillary, 250 mm x 0.4 mm). The linear ranges were 0.05 -100 pg/L with correlation coefficients of 0. 999 9, and the detection limits were 0. 02 - 0.05 micro gg/L. The spiked recoveries of iodide, thiocyanate and perchlorate ions were in the range of 85.1% to 100.1%. The relative standard deviations of the recoveries were 1.7% to 4.9%.

  9. Catalytic wet oxidation of thiocyanate with homogeneous copper(II) sulphate catalyst. (United States)

    Collado, Sergio; Laca, Adriana; Díaz, Mario


    The wet oxidation of thiocyanate has been investigated in a semi-batch reactor at temperatures between 423 and 473 K and pressures between 6.1 x 10(3) and 1.0 x 10(4)kPa in the presence of copper(II) sulphate as catalyst. The effects of copper concentration, initial thiocyanate concentration, pressure and temperature on the reaction rate were analyzed and the main products of reaction were identified. A kinetic model for the Cu-catalyzed reaction is here proposed, including temperature, oxygen concentration, and the reduction of Cu(2+) to Cu(+) that gives an accurate prediction of the oxidation process under the assayed conditions. A mechanistic model based on the formation of a transition complex between a copper cation and two thiocyanate anions has been proposed for the catalytic wet oxidation.

  10. Catalytic wet oxidation of thiocyanate with homogeneous copper(II) sulphate catalyst

    Energy Technology Data Exchange (ETDEWEB)

    Collado, Sergio; Laca, Adriana [Department of Chemical Engineering and Environmental Technology, University of Oviedo, c/ Julian Claveria s/n, E-33071, Oviedo (Spain); Diaz, Mario, E-mail: [Department of Chemical Engineering and Environmental Technology, University of Oviedo, c/ Julian Claveria s/n, E-33071, Oviedo (Spain)


    The wet oxidation of thiocyanate has been investigated in a semi-batch reactor at temperatures between 423 and 473 K and pressures between 6.1 x 10{sup 3} and 1.0 x 10{sup 4} kPa in the presence of copper(II) sulphate as catalyst. The effects of copper concentration, initial thiocyanate concentration, pressure and temperature on the reaction rate were analyzed and the main products of reaction were identified. A kinetic model for the Cu-catalyzed reaction is here proposed, including temperature, oxygen concentration, and the reduction of Cu{sup 2+} to Cu{sup +} that gives an accurate prediction of the oxidation process under the assayed conditions. A mechanistic model based on the formation of a transition complex between a copper cation and two thiocyanate anions has been proposed for the catalytic wet oxidation.

  11. Is Cytox 3522 (10% methylene-bis-thiocyanate) a human skin sensitizer?

    DEFF Research Database (Denmark)

    Andersen, Klaus Ejner; Hamann, K


    Methylene-bis-thiocyanate is an antimicrobial agent in Cytox 3522 (American Cyanamid Corporation) and Nalco 206 (Nalco Chemical Company). Both are wide-spectrum industrial biocides. Cytox 3522 showed a strong sensitization potential in guineau pigs using the Guinea Pig Maximization Test and the O......Methylene-bis-thiocyanate is an antimicrobial agent in Cytox 3522 (American Cyanamid Corporation) and Nalco 206 (Nalco Chemical Company). Both are wide-spectrum industrial biocides. Cytox 3522 showed a strong sensitization potential in guineau pigs using the Guinea Pig Maximization Test...

  12. Simultaneous oxidation of cyanide and thiocyanate at high pressure and temperature

    Energy Technology Data Exchange (ETDEWEB)

    Oulego, Paula; Collado, Sergio; Laca, Adriana; Díaz, Mario, E-mail:


    Graphical abstract: - Highlights: • The oxidation rate of SCN{sup −} was greatly enhanced by the presence of CN{sup −}. • The degradation of mixtures was significantly affected by temperature and pressure. • A free-radical pathway was proposed, CN{sup −} and CNO{sup −} being the reaction intermediates. • The principal reaction products were found to be HCOO{sup −}, NH{sub 3} and SO{sub 4}{sup 2−}. • One of the parallel routes gives the found products and the other N{sub 2}, CO{sub 2} and H{sub 2}. - Abstract: Thiocyanate and cyanide are important contaminants that frequently appear mixed in industrial effluents. In this work the wet oxidation of mixtures of both compounds, simulating real compositions, was carried out in a semi-batch reactor at temperature between 393 K and 483 K and pressure in the range of 2.0–8.0 MPa. The presence of cyanide (3.85 mM) increased the kinetic constant of thiocyanate degradation by a factor of 1.6, in comparison to the value obtained for the individual degradation of thiocyanate, (5.95 ± 0.05) × 10{sup −5} s{sup −1}. On the other hand, the addition of thiocyanate (0.98 mM) decreased the degradation rate of cyanide by 16%. This revealed the existence of synergistic and inhibitory phenomena between these two species. Additionally, cyanide was identified as an intermediate in the oxidation of thiocyanate, and formate, ammonia and sulfate were found to be the main reaction products. Taking into account the experimental data, a reaction pathway for the simultaneous wet oxidation of both pollutants was proposed. Two parallel reactions beginning from cyanate as intermediate were considered, one yielding ammonia and formate and the other giving carbon dioxide and nitrogen as final products.

  13. A practical synthesis of 3,4-diethoxybenzthioamide based on Friedel-Crafts reaction with potassium thiocyanate in methanesulfonic acid. (United States)

    Aki, Shinji; Fujioka, Takafumi; Ishigami, Masashi; Minamikawa, Jun-ichi


    The synthesis of 3,4-diethoxybenzthioamide, the key intermediate for OPC-6535, is achieved by employing Friedel-Crafts reaction of 1,2-diethoxybenzene with potassium thiocyanate in methanesulfonic acid at ambient temperature.

  14. Lactoperoxidase-catalyzed oxidation of thiocyanate by hydrogen peroxide: sup 15 N nuclear magnetic resonance and optical spectral studies

    Energy Technology Data Exchange (ETDEWEB)

    Modi, S.; Deodhar, S.S.; Behere, D.V.; Mitra, S. (Tata Institute of Fundamental Research, Bombay (India))


    To establish the agent(s) responsible for the activity of the lactoperoxidase (LPO)/SCN{sup {minus}}/H{sub 2}O{sub 2} system, the oxidation of thiocyanate with hydrogen peroxide, catalyzed by lactoperoxidase, has been studied by {sup 15}N NMR and optical spectroscopy at different concentrations of thiocyanate and hydrogen peroxide and at different pHs. The formation of hypothiocyanite ion (OSCN{sup {minus}}) as one of the oxidation products correlated well with activity of the LPO/SCN{sup {minus}}/H{sub 2}O{sub 2} system and was maximum when the concentrations of the H{sub 2}O{sub 2} and SCN{sup {minus}} were nearly the same and the pH was <6.0. At (H{sub 2}O{sub 2})/(SCN{sup {minus}}) = 1, OSCN{sup {minus}} decomposed very slowly back to thiocyanate. When the ratio (H{sub 2}O{sub 2})/(SCN{sup {minus}}) was above 2, formation of CN{sup {minus}} was observed, which was confirmed by {sup 15}N NMR and also by changes in the optical spectrum of LPO. The oxidation of thiocyanate by H{sub 2}O{sub 2} in the presence of LPO does not take place at pH >8.0. Since thiocyanate does not bind to LPO above this pH, the binding of thiocyanate to LPO is considered to be prerequisite for the oxidation of thiocyanate. Maximum inhibition of oxygen uptake by Streptococcus cremoris 972 bacteria was observed when hydrogen peroxide and thiocyanate were present in equimolar amounts and the pH was below 6.0.

  15. A solvent extraction study of molybdenum chloride and molybdenum thiocyanate complexes (United States)

    Greenland, L.P.; Lillie, E.G.


    The effect of reducing agents on molybdenum(VI) solutions in hydrochloric acid was studied by a solvent extraction technique to elucidate the composition of the colored molybdenum thiocyanate complex. Neither copper(I) chloride nor ascorbic acid have any effect on the extraction of MoO2Cl2; it is inferred that tin(II) chloride reduces Mo(VI) stepwise to a polynuclear Mo(V)??Mo(VI) complex and then to Mo(V). The colored thiocyanate complex produced by copper(I) and by ascorbic acid differs only slightly in extraction characteristics from the uncolored Mo(VI) complex. It is suggested that the color may be produced by an isomerization reaction of MoO2(SCN)2, and thus that the colored species may be a hexavalent rather than pentavalent molybdenum complex. ?? 1974.

  16. Chloroform Aided Extraction Spectrophotometric Determination of Rhenium Using Thiocyanate Complexing Agent

    Institute of Scientific and Technical Information of China (English)

    E. Keshavarz Alamdari; S.K. Sadrnezhaad; Z. Mos-hefi Shabestari


    A new technique is developed for quantitative determination of rhenium in aqueous media containing molybdenum,iron and copper ions. The method seems easier and more accurate than the traditional ones. It consists of the formation of rhenium thiocyanate complex, which is extracted with chloroform at the presence of hydrochloric acid.This complex is a highly visible light absorbent that can easily be detected with the aid of a spectrophotometer. The maximum absorbance (λmax) observed for this complex was in the visible range of 430~435 nm. The experimental results showed that in a concentration range from 0.5~8 mg/L, the absorbance behavior of the rhenium thiocyanate complex is followed to the Beer-Lambert law.

  17. Cystine antagonism of the antibacterial action of lactoperoxidase-thiocyanate-hydrogen peroxide on Streptococcus agalactiae.


    Mickelson, M. N.; Anderson, A J


    Cystine reduction in Streptococcus agalactiae, resulting in sulfhydryl formation, may account for antagonism of the antibacterial effect of lactoperoxidase-thiocyanate-hydrogen peroxide when cystine is present in excess of the amount needed for maximum growth. Accumulation of cystine by S. agalactiae and its reduction to form sulfhydryl compounds were demonstrated. The reduction of cystine appeared to occur by a couple reaction between glutathione reductase and glutathione-disulfide transhydr...

  18. Ammonium diphosphitoindate(III

    Directory of Open Access Journals (Sweden)

    Farida Hamchaoui


    Full Text Available The crystal structure of the title compound, NH4[In(HPO32], is built up from InIII cations (site symmetry 3m. adopting an octahedral environment and two different phosphite anions (each with site symmetry 3m. exhibiting a triangular–pyramidal geometry. Each InO6 octahedron shares its six apices with hydrogen phosphite groups. Reciprocally, each HPO3 group shares all its O atoms with three different metal cations, leading to [In(HPO32]− layers which propagate in the ab plane. The ammonium cation likewise has site symmetry 3m.. In the structure, the cations are located between the [In(HPO32]− layers of the host framework. The sheets are held together by hydrogen bonds formed between the NH4+ cations and the O atoms of the framework.

  19. Waterproofing Materials for Ammonium Nitrate

    Directory of Open Access Journals (Sweden)

    R.S. Damse


    Full Text Available This study explores the possibility of overcoming the problem of hygroscopicity of ammonium nitrate by coating the particles with selected waterproofing materials. Gravimetric analysis ofthe samples of ammonium nitrate coated with eight different waterproofing materials, vis-a-vis, uncoated ammonium nitrate, were conducted at different relative humidity and exposuretime. The results indicate that mineral jelly is the promising waterproofing material for ammonium nitrate among the materials tested, viz, calcium stearate, dioctyl phthalate, kaoline, diethylphthalate, dinitrotoluene, shelac varnish, and beeswax. Attempts were made to confirm the waterproofing ability of mineral jelly to ammonium nitrate using differential thermal analysisand x-ray diffraction patterns as an experimental tool. Suitability of mineral jelly as an additive for the gun propellant was also assessed on the basis of theoretical calculations using THERMprogram.

  20. Development of four-stage moving bed biofilm reactor train with a pre-denitrification configuration for the removal of thiocyanate and cyanate. (United States)

    Villemur, Richard; Juteau, Pierre; Bougie, Veronique; Ménard, Julie; Déziel, Eric


    Two trains (A and B) of four-stage moving bed biofilm reactors (MBBRs) were developed for the degradation of thiocyanate (SCN(-)), cyanate (OCN(-)) and ammonia (NH3). A pre-denitrification configuration was established in the first-stage reactor of the B train using SCN(-) and OCN(-) as the sole carbon source. SCN(-), OCN(-) and NH3 were completely removed in both trains. The highest removal of total nitrogen equivalent (total-N) occurred at a loading rate of 5.6 mg-N L(-1) h(-1). The pre-denitrification configuration resulted in increased total-N removal in the B train (62.6%) compared to the A train (38.5%). Thiobacillus spp. were the predominant bacteria in all MBBRs. Bacteria related to bioprocesses involving anaerobic ammonium oxidation were present in the B train, suggesting that part of nitrogen removal occurs via this pathway. Our results showed that the pre-denitrification configuration increases the efficiency of removal of total-N compounds in the SCN(-)/OCN(-)-degrading MBBR process.

  1. Ammonium Perchlorate and Ammonium Perchlorate- Hydroxyl Terminated Polybutadiene Simulated Combustion

    Directory of Open Access Journals (Sweden)

    Rene Francisco Boschi Gonçalves


    Full Text Available The combustion simulation of ammonium perchlorate was carried out with the software Chemkin, in two steps: the burning behavior of pure ammonium perchlorate and the one of formulated ammonium perchlorate with hydroxyl terminated polybutadiene binder. In both cases, the room pressure varied in order to verify its influence in the system. The burning environment conditions were diverse. During the combustion process, the data obtained from the kinetic chemistry simulation software were compiled. The flame structure can be described by the molar fraction of the burning products and the temperature evolution from the surface of the material.

  2. Concentrations of thiocyanate and goitrin in human plasma, their precursor concentrations in brassica vegetables, and associated potential risk for hypothyroidism. (United States)

    Felker, Peter; Bunch, Ronald; Leung, Angela M


    Brassica vegetables are common components of the diet and have beneficial as well as potentially adverse health effects. Following enzymatic breakdown, some glucosinolates in brassica vegetables produce sulforaphane, phenethyl, and indolylic isothiocyanates that possess anticarcinogenic activity. In contrast, progoitrin and indolylic glucosinolates degrade to goitrin and thiocyanate, respectively, and may decrease thyroid hormone production. Radioiodine uptake to the thyroid is inhibited by 194 μmol of goitrin, but not by 77 μmol of goitrin. Collards, Brussels sprouts, and some Russian kale (Brassica napus) contain sufficient goitrin to potentially decrease iodine uptake by the thyroid. However, turnip tops, commercial broccoli, broccoli rabe, and kale belonging to Brassica oleracae contain less than 10 μmol of goitrin per 100-g serving and can be considered of minimal risk. Using sulforaphane plasma levels following glucoraphanin ingestion as a surrogate for thiocyanate plasma concentrations after indole glucosinolate ingestion, the maximum thiocyanate contribution from indole glucosinolate degradation is estimated to be 10 μM, which is significantly lower than background plasma thiocyanate concentrations (40-69 μM). Thiocyanate generated from consumption of indole glucosinolate can be assumed to have minimal adverse risks for thyroid health.

  3. Effect of lactoperoxidase on the antimicrobial effectiveness of the thiocyanate hydrogen peroxide combination in a quantitative suspension test

    Directory of Open Access Journals (Sweden)

    Schwahn Ch


    Full Text Available Abstract Background The positive antimicrobial effects of increasing concentrations of thiocyanate (SCN- and H2O2 on the human peroxidase defence system are well known. However, little is known about the quantitative efficacy of the human peroxidase thiocyanate H2O2 system regarding Streptococcus mutans and sanguinis, as well as Candida albicans. The aim of this study was to evaluate the effect of the enzyme lactoperoxidase on the bactericidal and fungicidal effectiveness of a thiocyanate-H2O2 combination above the physiological saliva level. To evaluate the optimal effectiveness curve, the exposure times were restricted to 1, 3, 5, and 15 min. Results The bactericidal and fungicidal effects of lactoperoxidase on Streptococcus mutans and sanguinis and Candida albicans were evaluated by using two test mixtures of a 2.0% (w/v; 0.34 M thiocyanate and 0.4% (w/v; 0.12 M hydrogen peroxide solution, one without and one with lactoperoxidase. Following the quantitative suspension tests (EN 1040 and EN 1275, the growth of surviving bacteria and fungi in a nutrient broth was measured. The reduction factor in the suspension test without lactoperoxidase enzyme was Conclusion The tested thiocyanate and H2O2 mixtures showed no relevant antimicrobial effect. However, by adding lactoperoxidase enzyme, the mixtures became not only an effective bactericidal (Streptococcus mutans and sanguinis but also a fungicidal (Candida albicans agent.

  4. Biodegradation Of Thiocyanate Using Microbial Consortia Cultured From Gold Mine Tailings (United States)

    Moreau, J. W.; Watts, M. P.; Spurr, L. P.; Vu, H. P.


    Some bacteria possess the capability to degrade SCN-; therefore, harnessing this metabolic trait offers a biotechnological remediation strategy for SCN- produced in gold ore processing. A tailings storage facility (TSF) at a gold mine in Victoria, Australia holds large quantities of thiocyanate (SCN-) contaminated mine waste. The surface water in the TSF typically contains SCN- concentrations of >800 mg L-1, and seepage from the facility has contaminated the groundwater at the site. This study aimed to culture SCN-degrading microbes from the TSF, characterize the microbial consortia and test its operational parameters for use in a thiocyanate-degrading bioreactor. Surface samples were obtained from several locations around the TSF facility and used to inoculate medium reflective of the moderately saline and alkaline tailings water at the TSF, in the absence of organic carbon but subject to additions of phosphate and trace metals. Four microbial consortia capable of rapid SCN- degradation were successfully cultured. Sequencing of 16S rRNA genes found that the consortia were dominated by Thiobacillus species, a genus of known SCN- degraders. Lower abundances of other SCN- degraders; Sphingopyxis and Rhodobacter, were also identified. The impact of a number of geochemical conditions, including pH, temperature and SCN- concentration, upon the growth and SCN- degrading capacity of these consortia was determined. These results informed the optimization of a lab-scale thiocyanate degrading bioreactor. In summary, the cultured bacterial consortia proved effective towards SCN- degradation at the prevailing geochemical conditions of the TSF, requiring minimal nutrient additions. These consortia were dominated by genera of known autotrophic SCN- degraders. The comprehensive characterisation of these SCN- degrading consortia will provide the fundamental operational parameters required for deployment of this technique at the field scale.

  5. 21 CFR 184.1138 - Ammonium chloride. (United States)


    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium chloride. 184.1138 Section 184.1138 Food... Specific Substances Affirmed as GRAS § 184.1138 Ammonium chloride. (a) Ammonium chloride (NH4Cl, CAS Reg. No. 12125-02-9) is produced by the reaction of sodium chloride and an ammonium salt in solution....

  6. 21 CFR 184.1133 - Ammonium alginate. (United States)


    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium alginate. 184.1133 Section 184.1133 Food... Specific Substances Affirmed as GRAS § 184.1133 Ammonium alginate. (a) Ammonium alginate (CAS Reg. No. 9005.... Ammonium alginate is prepared by the neutralization of purified alginic acid with appropriate pH...

  7. Determination of Trace Thiocyanate by a Chitosan-Modified Glassy Carbon Electrode

    Institute of Scientific and Technical Information of China (English)


    A chitosan-modified glassy carbon electrode(CMGCE) was employed for the determination of thiocyanate. The measurement was carried out by means of anodic stripping voltammetry. The effects of several experimental parameters, such as pH, the amount of modifier, deposition potential and deposition time were studied for analytical application, respectively. A liner response was obtained in the concentration range of 3.5×10-8-9.3×10-7 g/mL of SCN-. The detection limit was found to be 1.9×10-8 g/mL. The method was satisfactorily used to detect SCN- in saliva.

  8. Thermal and Mechanical Properties of a Complex Nonlinear Optical Material: Cadmium Mercury Thiocyanate Crystal

    Institute of Scientific and Technical Information of China (English)

    YUAN Duo-Rong; XU Dong; ZHANG Guang-Hui; LIU Ming-Guo; GUO Shi-Yi; MENG Fan-Qing; LU Meng-Kai; FANG Qi; JIANG Min-Hua


    Institute of Crystal Materials and State Key Laboratory of Crystal Materials, Shandong University, Ji'nan 250100 (Received 18 March 2000) The data of the thermal expansion and specific heat of cadmium mercury thiocyanate crystal have been obtained. The specific heat is 0.7588J/g℃ at room temperature. The thermal expansion occurs in the direction parallel to the c-axis, and the thermal contraction occurs in the direction parallel to the a-axis. The thermal expansion is the same as the thermal contraction at 353 K. The relationship between thermal properties and crystal structure is discussed.

  9. Thiocyanate-free cyclometalated ruthenium(II) sensitizers for DSSC: a combined experimental and theoretical investigation. (United States)

    Chitumalla, Ramesh Kumar; Gupta, Kankatala S V; Malapaka, Chandrasekhram; Fallahpour, Reza; Islam, Ashraful; Han, Liyuan; Kotamarthi, Bhanuprakash; Singh, Surya Prakash


    In an effort to bring out efficient thiocyanate-free dyes for dye sensitized solar cells (DSSC) we have designed, synthesized and characterized four novel cyclometalated ruthenium(II) dyes (M1 to M4) with superior photochemical properties. All dyes contain terpyridyl ligands (TPY) with carboxylic acids as anchoring groups and cyclometalated ligand (TPY-C) with substituents for fine tuning the electronic properties. We obtain a broad absorption band which extends up to 725 nm due to metal to ligand charge transfer (MLCT) when donating groups are used, which slightly blue-shifts when a withdrawing group is used. In addition to the CT, small HOMO-LUMO gaps are obtained from electrochemical measurements which indicate characteristics of an ideal sensitizer. All four dyes were used as sensitizers for DSSC and photoelectrochemical measurements were carried out. Reasonably good efficiency (7.1%) has been achieved for . We have carried out periodic-DFT studies of these dyes adsorbed on the (TiO2)38 cluster. They revealed that, in bidentate bridging mode the dyes preferably bind with the help of two carboxylic groups onto the TiO2. To the best of our knowledge we are the first to do DFT studies of thiocyanate free cyclometalated ruthenium(ii) dyes tethered to TiO2.

  10. Employing Lead Thiocyanate Additive to Reduce the Hysteresis and Boost the Fill Factor of Planar Perovskite Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Ke, Weijun [Department of Physics and Astronomy and Wright Center for Photovoltaics Innovation and Commercialization, The University of Toledo, Toledo OH 43606 USA; Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education of China, School of Physics and Technology, Wuhan University, Wuhan 430072 China; National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Xiao, Chuanxiao [National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Wang, Changlei [Department of Physics and Astronomy and Wright Center for Photovoltaics Innovation and Commercialization, The University of Toledo, Toledo OH 43606 USA; Saparov, Bayrammurad [Department of Mechanical Engineering and Materials Science, Duke University, Durham NC 27708 USA; Department of Chemistry, Duke University, Durham NC 27708 USA; Duan, Hsin-Sheng [Department of Mechanical Engineering and Materials Science, Duke University, Durham NC 27708 USA; Zhao, Dewei [Department of Physics and Astronomy and Wright Center for Photovoltaics Innovation and Commercialization, The University of Toledo, Toledo OH 43606 USA; National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Xiao, Zewen [Department of Physics and Astronomy and Wright Center for Photovoltaics Innovation and Commercialization, The University of Toledo, Toledo OH 43606 USA; Schulz, Philip [National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Harvey, Steven P. [National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Liao, Weiqiang [Department of Physics and Astronomy and Wright Center for Photovoltaics Innovation and Commercialization, The University of Toledo, Toledo OH 43606 USA; Meng, Weiwei [Department of Physics and Astronomy and Wright Center for Photovoltaics Innovation and Commercialization, The University of Toledo, Toledo OH 43606 USA; Yu, Yue [Department of Physics and Astronomy and Wright Center for Photovoltaics Innovation and Commercialization, The University of Toledo, Toledo OH 43606 USA; Cimaroli, Alexander J. [Department of Physics and Astronomy and Wright Center for Photovoltaics Innovation and Commercialization, The University of Toledo, Toledo OH 43606 USA; Jiang, Chun-Sheng [National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Zhu, Kai [National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Al-Jassim, Mowafak [National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Fang, Guojia [Key Laboratory of Artificial Micro- and Nano-structures of Ministry of Education of China, School of Physics and Technology, Wuhan University, Wuhan 430072 China; Mitzi, David B. [Department of Mechanical Engineering and Materials Science, Duke University, Durham NC 27708 USA; Department of Chemistry, Duke University, Durham NC 27708 USA; Yan, Yanfa [Department of Physics and Astronomy and Wright Center for Photovoltaics Innovation and Commercialization, The University of Toledo, Toledo OH 43606 USA


    Lead thiocyanate in the perovskite precursor can increase the grain size of a perovskite thin film and reduce the conductivity of the grain boundaries, leading to perovskite solar cells with reduced hysteresis and enhanced fill factor. A planar perovskite solar cell with grain boundary and interface passivation achieves a steady-state efficiency of 18.42%.

  11. Employing Lead Thiocyanate Additive to Reduce the Hysteresis and Boost the Fill Factor of Planar Perovskite Solar Cells. (United States)

    Ke, Weijun; Xiao, Chuanxiao; Wang, Changlei; Saparov, Bayrammurad; Duan, Hsin-Sheng; Zhao, Dewei; Xiao, Zewen; Schulz, Philip; Harvey, Steven P; Liao, Weiqiang; Meng, Weiwei; Yu, Yue; Cimaroli, Alexander J; Jiang, Chun-Sheng; Zhu, Kai; Al-Jassim, Mowafak; Fang, Guojia; Mitzi, David B; Yan, Yanfa


    Lead thiocyanate in the perovskite precursor can increase the grain size of a perovskite thin film and reduce the conductivity of the grain boundaries, leading to perovskite solar cells with reduced hysteresis and enhanced fill factor. A planar perovskite solar cell with grain boundary and interface passivation achieves a steady-state efficiency of 18.42%.

  12. Kinetic studies of adsorption of thiocyanate onto ZnCl2 activated carbon from coir pith, an agricultural solid waste. (United States)

    Namasivayam, C; Sangeetha, D


    The adsorption of thiocyanate onto ZnCl2 activated carbon developed from coir pith was investigated to assess the possible use of this adsorbent. The influence of various parameters such as agitation time, thiocyanate concentration, adsorbent dose, pH and temperature has been studied. Adsorption followed second-order rate kinetics. Two theoretical adsorption isotherms, namely, Langmuir and Freundlich were used to describe the experimental results. The Langmuir adsorption capacity (Q0) was found to be 16.2 mg g(-1) of the adsorbent. The per cent adsorption was maximum in the pH range 3.0-7.0. pH effect and desorption studies showed that ion exchange and chemisorption mechanism are involved in the adsorption process. Thermodynamic parameters such as DeltaG0, DeltaH0 and DeltaS0 for the adsorption were evaluated. The negative values of DeltaH0 confirm the exothermic nature of adsorption. Effects of foreign ions on the adsorption of thiocyanate have been investigated. Removal of thiocyanate from ground water was also tested.

  13. Inhibition of carbon steel corrosion in 1 M HCl medium by potassium thiocyanate

    Directory of Open Access Journals (Sweden)

    A. Anejjar


    Full Text Available The effect of potassium thiocyanate (KSCN on the corrosion of carbon steel (C-steel in 1 M HCl has been investigated in relation to the concentration of the inhibitor by polarization curves, electrochemical impedance spectroscopy and weight loss measurement. The results obtained revealed that this compound is a good mixed type inhibitor with predominant cathodic effectiveness. The effect of temperature on the corrosion behavior with the addition of optimal concentration of KSCN was studied in the temperature range 298–328 K. The value of inhibition efficiency decreases slightly with the increase in temperature. Changes in impedance parameters (charge transfer resistance, Rct, and double layer capacitance, Cdl were indicative of adsorption of KSCN on the metal surface, leading to the formation of a protective film. Adsorption of KSCN on the C-steel surface was found to obey the Langmuir adsorption isotherm. Some thermodynamic functions of dissolution and adsorption processes were also determined and discussed.

  14. 21 CFR 582.1141 - Ammonium phosphate. (United States)


    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ammonium phosphate. 582.1141 Section 582.1141 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1141 Ammonium phosphate. (a) Product. Ammonium phosphate (mono- and dibasic). (b)...

  15. 76 FR 46907 - Ammonium Nitrate Security Program (United States)


    ... and fertilizer blends containing more than 15% by weight ammonium nitrate, except liquid fertilizers... concerning the detonability of ammonium nitrate; Comments on how likely ammonium nitrate fertilizer users would be to use an alternative fertilizer that is potentially less detonable, such as Sulf-N...

  16. 76 FR 11273 - Ammonium Nitrate From Russia (United States)


    ... COMMISSION Ammonium Nitrate From Russia AGENCY: United States International Trade Commission. ACTION: Institution of a five-year review concerning the suspended investigation on ammonium nitrate from Russia... investigation on ammonium nitrate from Russia would be likely to lead to continuation or recurrence of...

  17. 76 FR 47238 - Ammonium Nitrate From Russia (United States)


    ... COMMISSION Ammonium Nitrate From Russia Determination On the basis of the record \\1\\ developed in the subject... order on ammonium nitrate from Russia would be likely to lead to continuation or recurrence of material... Commission are contained in USITC Publication 4249 (August 2011), entitled Ammonium Nitrate from...

  18. 21 CFR 582.7133 - Ammonium alginate. (United States)


    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ammonium alginate. 582.7133 Section 582.7133 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Ammonium alginate. (a) Product. Ammonium alginate. (b) Conditions of use. This substance is...

  19. Vibrational dynamics of thiocyanate and selenocyanate bound to horse heart myoglobin

    Energy Technology Data Exchange (ETDEWEB)

    Maj, Michał; Oh, Younjun; Park, Kwanghee; Lee, Jooyong; Cho, Minhaeng, E-mail: [Department of Chemistry, Korea University, Seoul 136-713 (Korea, Republic of); Kwak, Kyung-Won [Department of Chemistry, Chung-Ang University, Seoul 156-756, SouthKorea (Korea, Republic of)


    The structure and vibrational dynamics of SCN- and SeCN-bound myoglobin have been investigated using polarization-controlled IR pump-probe measurements and quantum chemistry calculations. The complexes are found to be in low and high spin states, with the dominant contribution from the latter. In addition, the Mb:SCN high spin complex exhibits a doublet feature in the thiocyanate stretch IR absorption spectra, indicating two distinct molecular conformations around the heme pocket. The binding mode of the high spin complexes was assigned to occur through the nitrogen atom, contrary to the binding through the sulfur atom that was observed in myoglobin derived from Aplysia Limacina. The vibrational energy relaxation process has been found to occur substantially faster than those of free SCN{sup −} and SeCN{sup −} ions and neutral SCN- and SeCN-derivatized molecules reported previously. This supports the N-bound configurations of MbNCS and MbNCSe, because S- and Se-bound configurations are expected to have significantly long lifetimes due to the insulation effect by heavy bridge atom like S and Se in such IR probes. Nonetheless, even though their lifetimes are much shorter than those of corresponding free ions in water, the vibrational lifetimes determined for MbNCS and MbNCSe are still fairly long compared to those of azide and cyanide myoglobin systems studied before. Thus, thiocyanate and selenocyanate can be good local probes of local electrostatic environment in the heme pocket. The globin dependence on binding mode and vibrational dynamics is also discussed.

  20. Vibrational dynamics of thiocyanate and selenocyanate bound to horse heart myoglobin (United States)

    Maj, Michał; Oh, Younjun; Park, Kwanghee; Lee, Jooyong; Kwak, Kyung-Won; Cho, Minhaeng


    The structure and vibrational dynamics of SCN- and SeCN-bound myoglobin have been investigated using polarization-controlled IR pump-probe measurements and quantum chemistry calculations. The complexes are found to be in low and high spin states, with the dominant contribution from the latter. In addition, the Mb:SCN high spin complex exhibits a doublet feature in the thiocyanate stretch IR absorption spectra, indicating two distinct molecular conformations around the heme pocket. The binding mode of the high spin complexes was assigned to occur through the nitrogen atom, contrary to the binding through the sulfur atom that was observed in myoglobin derived from Aplysia Limacina. The vibrational energy relaxation process has been found to occur substantially faster than those of free SCN- and SeCN- ions and neutral SCN- and SeCN-derivatized molecules reported previously. This supports the N-bound configurations of MbNCS and MbNCSe, because S- and Se-bound configurations are expected to have significantly long lifetimes due to the insulation effect by heavy bridge atom like S and Se in such IR probes. Nonetheless, even though their lifetimes are much shorter than those of corresponding free ions in water, the vibrational lifetimes determined for MbNCS and MbNCSe are still fairly long compared to those of azide and cyanide myoglobin systems studied before. Thus, thiocyanate and selenocyanate can be good local probes of local electrostatic environment in the heme pocket. The globin dependence on binding mode and vibrational dynamics is also discussed.

  1. Purification of bovine milk lactoperoxidase and investigation of antibacterial properties at different thiocyanate mediated. (United States)

    Uğuz, M T; Ozdemir, H


    Bovine lactoperoxidase (LPO) was purified with amberlite CG 50 H+ resin, CM sephadex C-50 ion-exchange chromatography, and sephadex G-100 gel filtration chromatography from skim milk. The activity of lactoperoxidase was measured by using 2.2-azino-bis (3-ethylbenzthiazoline-6 sulfonic acid) diammonium salt (ABTS) as a choromogenic substrate at pH 6.0. Purification degree for the purified enzyme was controlled with SDS-PAGE and Rz value (A412/A280). Rz value for the purified LPO was 0.8. Km value at pH 6.0 at 20 degrees C for the LPO was 0.20 mM. Vmax value was 7.87 micromol/ml min at pH 6.0 at 20 degrees C. Bovine LPO showed high antibacterial activity in 100 mM thiocyanate--100 mM H2O2 medium for some pathogenic bacteria, such as Aeromonas hydrophila ATCC 7966, Micrococcus luteus LA 2971, Mycobacterium smegmatis RUT, Bacillus subtilis IMG 22, Pseudomonas pyocyanea, Bacillus subtilis var. niger ATCC 10, Pseudomonas aeruginosa ATCC 27853, Enterococcus faecalis ATCC 15753, Bacillus brevis FMC3, Klebsiella pneumoniae FMC 5, Corynebacterium xerosis UC 9165, Bacillus cereus EU, Bacillus megaterium NRS, Yersinia enterocolytica, Listeria monocytogenes scoot A, Bacillus megaterium EU, Bacillus megaterium DSM32, Klebsiella oxytocica, Staphylococcus aerogenes, Streptococcus faecalis, Mycobacterium smegmatis CCM 2067 and compared with well known antibacterial substances such as penicilline, ampicilline, amoxicillin-clavulanate and ceftriaxon. The LPO--100 mM thiocyanate--100 mM H2O2 system was purposed as an effective agent against many of the diseases causing organisms in human and animals.

  2. Phase diagram of ammonium nitrate (United States)

    Dunuwille, M.; Yoo, C. S.


    Ammonium Nitrate (AN) has often subjected to uses in improvised explosive devices, due to its wide availability as a fertilizer and its capability of becoming explosive with slight additions of organic and inorganic compounds. Yet, the origin of enhanced energetic properties of impure AN (or AN mixtures) is neither chemically unique nor well understood -resulting in rather catastrophic disasters in the past1 and thereby a significant burden on safety in using ammonium nitrates even today. To remedy this situation, we have carried out an extensive study to investigate the phase stability of AN at high pressure and temperature, using diamond anvil cells and micro-Raman spectroscopy. The present results confirm the recently proposed phase IV-to-IV' transition above 17 GPa2 and provide new constraints for the melting and phase diagram of AN to 40 GPa and 400 °C.

  3. [3,3]-sigmatropic rearrangements of fluorinated allyl (Thio)cyanates - a tool for the synthesis of fluorinated (Thio)ureas. (United States)

    Ramb, Daniel C; Kost, Lisa; Haufe, Günter


    The first (thio)cyanate to iso(thio)cyanate rearrangements based on 2-fluoroallylic alcohols are presented. Long-chain 2-fluoroallylic alcohols were converted to corresponding N-unsubstituted carbamates by treatment with trichloroacetyl isocyanate. Dehydration using trifluoroacetic anhydride in the presence of triethylamine formed intermediate allylic cyanates, which immediately underwent sigmatropic rearrangement to fluorinated allyl isocyanates. Without isolation the latter delivered fluorinated ureas by addition of amines. The thiocyanate to isothiocyanate rearrangements started from the same fluorinated allylic alcohols, which were first converted to mesylates. Heating in THF with potassium thiocyanate led to fluorinated allyl isothiocyanates, via [3,3]-sigmatropic rearrangement of intermediate allyl thiocyanates. The formed products were further reacted with amines to fluorinated thioureas.

  4. Ultrafast Structural Fluctuations of Myoglobin-Bound Thiocyanate and Selenocyanate Ions Measured with Two-Dimensional Infrared Photon Echo Spectroscopy. (United States)

    Maj, Michał; Kwak, Kyungwon; Cho, Minhaeng


    Structural dynamics within the distal cavity of myoglobin protein is investigated using 2D-IR and IR pump-probe spectroscopy of the N≡C stretch modes of heme-bound thiocyanate and selenocyanate ions. Although myoglobin-bound thiocyanate group shows a doublet in its IR absorption spectrum, no cross peaks originating from chemical exchange between the two components are observed in the time-resolved 2D IR spectra within the experimental time window. Frequency-frequency correlation functions of the two studied anionic ligands are obtained by means of a few different analysis approaches; these functions were then used to elucidate the differences in structural fluctuation around ligand, ligand-protein interactions, and the degree of structural heterogeneity within the hydrophobic pocket of these myoglobin complexes.

  5. Simultaneous Determination of Cyanide and Thiocyanate in Plasma by Chemical Ionization Gas Chromatography Mass-Spectrometry (CI-GC-MS) (United States)


    at RT. It has been found that SCN− can be converted to cyanide in the presence of erythrocytes [46], or oxidizing agents such as nitrite and hydrogen plants. In: Keeler RF, Van Kampen KR, James LF (eds) Effects of poisons in plants on livestock. Academic Press, San Diego, pp 301–310 5...Wu HL (1994) Electron-capture gas chromatographic determination of cyanide, iodide, nitrite, sulfide , and thiocyanate anions by phase-transfer

  6. Inorganic polarography in organic solvents-II: polarographic examination of the molybdenum(V) thiocyanate complex in diethyl ether. (United States)

    Afghan, B K; Dagnall, R M


    A procedure involving the solvent extraction of molybdenum(V) thiocyanate into diethyl ether followed by a direct polarographic examination of the organic phase offers a selective method for the determination of molybdenum down to 0.5 ppm. Only molybdenum, amongst 21 elements examined, is observed to give a reduction wave under the recommended conditions. The method is evaluated with respect to various experimental factors and is applied to the determination of molybdenum in mild and alloy steels.

  7. A comparative study on the aggregating effects of guanidine thiocyanate, guanidine hydrochloride and urea on lysozyme aggregation

    Energy Technology Data Exchange (ETDEWEB)

    Emadi, Saeed, E-mail:; Behzadi, Maliheh


    Highlights: • Lysozyme aggregated in guanidine thiocyanate (1.0 and 2.0 M). • Lysozyme aggregated in guanidine hydrochloride (4 and 5 M). • Lysozyme did not aggregated at any concentration (0.5–5 M) of urea. • Unfolding pathway is more important than unfolding per se in aggregation. - Abstract: Protein aggregation and its subsequent deposition in different tissues culminate in a diverse range of diseases collectively known as amyloidoses. Aggregation of hen or human lysozyme depends on certain conditions, namely acidic pH or the presence of additives. In the present study, the effects on the aggregation of hen egg-white lysozyme via incubation in concentrated solutions of three different chaotropic agents namely guanidine thiocyanate, guanidine hydrochloride and urea were investigated. Here we used three different methods for the detection of the aggregates, thioflavin T fluorescence, circular dichroism spectroscopy and atomic force microscopy. Our results showed that upon incubation with different concentrations (0.5, 1.0, 2.0, 3.0, 4.0, 5.0 M) of the chemical denaturants, lysozyme was aggregated at low concentrations of guanidine thiocyanate (1.0 and 2.0 M) and at high concentrations of guanidine hydrochloride (4 and 5 M), although no fibril formation was detected. In the case of urea, no aggregation was observed at any concentration.

  8. Indirect determination of cefradine with n-propyl alcohol-ammonium sulfate-water system by extraction-flotation of cuprous thiocyanate

    Institute of Scientific and Technical Information of China (English)

    Ling Li Wu; Wei Zhao; Quan Min Li


    A new method was developed for the determination of cefradine by extraction-flotation of CuSCN. The experiment indicatedthat in the presence of 0.20 mol/L NaOH the degradation of cefradine took place in water bath at 100℃. The thiol group (-SH) ofthe degradation product could reduce Cu(Ⅱ) to Cu(Ⅰ) for the formation of the emulsion CuSCN in the presence of NH<,4SCN at pH4.0. By determining the residual amount of Cu(Ⅱ) in the solution and calculating the flotation yield of Cu(Ⅱ), the indirectdetermination of cefradine can be obtained. This method has been applied to determine cefradine in capsules, human serum andurine samples, respectively.2008 Quan Min Li. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.

  9. Synthesis of Chitosan Quaternary Ammonium Salts

    Institute of Scientific and Technical Information of China (English)


    A series of N-alkyl or N-aryl chitosan quaternary ammonium salts were prepared via Schiffs base intermediates. Quaternization of N-substituted chitosan derivatives was carried out using methyl iodide to produce water-soluble cationic chitosan quaternary ammonium salt. The products were characterized by IR, 1HNMR and elemental analysis. The degree of substitution of chitosan quaternary ammonium salt was calculated by elemental analysis.

  10. Determination of Sodium Thiocyanate in Raw Milk%生鲜乳中硫氰酸钠的检测

    Institute of Scientific and Technical Information of China (English)

    李爱军; 张宁; 李明; 周鑫; 董李学; 郑百芹


    生鲜乳中掺入硫氰酸钠后可有效抑菌、保鲜。但硫氰酸钠具有毒性,少量的食入就会对人体造成极大伤害。本试验采用离子色谱法于2014年对河北省唐山市4个县的乳头奶和罐奶共计643批生鲜乳样品进行了硫氰酸钠的监测,以评估唐山地区生鲜乳的质量安全。结果表明,643批生鲜乳样品中硫氰酸钠含量总体情况符合正态分布,最小、最大、平均含量分别为0.13、15.7和2.52mg/kg。对乳头奶中的硫氰酸钠和罐奶中的硫氰酸钠进行比较,发现乳头奶中的硫氰酸钠和罐奶中的硫氰酸钠的分布情况基本一致,表明本研究中唐山地区生鲜牛乳不存在人为添加硫氰酸钠的问题。%Sodium thiocyanate is always used for inhibiting bacterial growth and keeping raw milk fresh. However, it is toxic, little quatity of which will cause huge harm to human, and threatens healthy of the people. It will interfere with the harmonious development of society. To assess the risk of raw milk in Tangshan city, in this study, contents of sodium thiocyanate in napple milk and milk from tank, totally 643 samples from 4 counties in Tangshan of Hebei Province were detemined using ion chromatographic in 2014. The results showed that the sodium thiocyanate contents in 643 raw milk samples were subordinate to the normal distribution law. The minimum, maximum, and mean value were 0.13, 15.7, and 2.52mg/kg. The contents comparison of napple milk and milk from tank was performed, and it showed that the distribution of sodium thiocyanate contents in napple milk was almost agreed with that in milk from tank, which suggested that artiifcially adding sodium thiocyanate was not found in raw milk in Tangshan city.

  11. A New Composition for Co(II-porphyrin-based Membranes Used in Thiocyanate-selective Electrodes

    Directory of Open Access Journals (Sweden)

    Otilia Bizerea-Spiridon


    Full Text Available In the present paper, the potentiometric response characteristics of ametalloporphyrin-based electrode in o-nitrophenyloctylether (o-NPOE plasticizedpolyvinyl chloride (PVC membrane are presented for a set of monovalent anions. Asmembrane ionophore, 5,10,15,20-tetrakis-(4-methoxyphenyl-porphyrin-Co(II(CoTMeOPP was used. To establish the optimum composition of the membrane, differentmolar percents of cationic derivative (mol.% relative to ionophore were used. Electrodesformulated with membranes containing 1 wt.% ionophore, 66 wt.% o-NPOE, 33 wt.% PVC(plasticizer: PVC = 2:1 and the lipophilic cationic derivative (35 mol% are shown toexhibit high selectivity for thiocyanate with a near-Nernstian slope in the workingconcentration range of 1.0×10−1–1.0×10−5 M, with a good stability in time.

  12. Synthesis, characterization, and application of 1-butyl-3-methylimidazolium thiocyanate for extractive desulfurization of liquid fuel. (United States)

    Dharaskar, Swapnil A; Wasewar, Kailas L; Varma, Mahesh N; Shende, Diwakar Z


    1-Butyl-3-methylimidazolium thiocyanate [BMIM]SCN has been presented on extractive desulfurization of liquid fuel. The FTIR, (1)H-NMR, and C-NMR have been discussed for the molecular confirmation of synthesized [BMIM]SCN. Further, thermal, conductivity, moisture content, viscosity, and solubility analyses of [BMIM]SCN were carried out. The effects of time, temperature, sulfur compounds, ultrasonication, and recycling of [BMIM]SCN on removal of dibenzothiophene from liquid fuel were also investigated. In extractive desulfurization, removal of dibenzothiophene in n-dodecane was 86.5 % for mass ratio of 1:1 in 30 min at 30 °C under the mild process conditions. [BMIM]SCN could be reused five times without a significant decrease in activity. Also, in the desulfurization of real fuels, multistage extraction was examined. The data and results provided in the present paper explore the significant insights of imidazolium-based ionic liquids as novel extractant for extractive desulfurization of liquid fuels.

  13. Low-Pressure Vapor-Assisted Solution Process for Thiocyanate-Based Pseudohalide Perovskite Solar Cells. (United States)

    Chiang, Yu-Hsien; Cheng, Hsin-Min; Li, Ming-Hsien; Guo, Tzung-Fang; Chen, Peter


    In this report, we fabricated thiocyanate-based perovskite solar cells with low-pressure vapor-assisted solution process (LP-VASP) method. Photovoltaic performances are evaluated with detailed materials characterizations. Scanning electron microscopy images show that SCN-based perovskite films fabricated using LP-VASP have long-range uniform morphology and large grain sizes up to 1 μm. The XRD and Raman spectra were employed to observe the characteristic peaks for both SCN-based and pure CH3 NH3 PbI3 perovskite. We observed that the Pb(SCN)2 film transformed to PbI2 before the formation of perovskite film. X-ray photoemission spectra (XPS) show that only a small amount of S remained in the film. Using LP-VASP method, we fabricated SCN-based perovskite solar cells and achieved a power conversion efficiency of 12.72 %. It is worth noting that the price of Pb(SCN)2 is only 4 % of PbI2 . These results demonstrate that pseudo-halide perovskites are promising materials for fabricating low-cost perovskite solar cells.

  14. 49 CFR 176.410 - Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. (United States)


    ... 49 Transportation 2 2010-10-01 2010-10-01 false Division 1.5 materials, ammonium nitrate and ammonium nitrate mixtures. 176.410 Section 176.410 Transportation Other Regulations Relating to... nitrate and ammonium nitrate mixtures. (a) This section prescribes requirements to be observed...

  15. 33 CFR 126.28 - Ammonium nitrate, ammonium nitrate fertilizers, fertilizer mixtures, or nitro carbo nitrate... (United States)


    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Ammonium nitrate, ammonium nitrate fertilizers, fertilizer mixtures, or nitro carbo nitrate; general provisions. 126.28 Section 126...) WATERFRONT FACILITIES HANDLING OF DANGEROUS CARGO AT WATERFRONT FACILITIES § 126.28 Ammonium...

  16. Equilibrium studies of sodium-ammonium potassium-ammonium, and calcium-ammonium exchanges on clinoptilolite zeolite

    Energy Technology Data Exchange (ETDEWEB)

    Jama, M.A.; Yuecel, H. (Middle East Technical Univ., Ankara (Turkey))


    Forward and reverse ion-exchange isotherms for the binary sodium-ammonium, potassium-ammonium, and calcium-ammonium systems on clinoptilolite have been measured in aqueous solutions at a total concentration of 0.1 equiv/dm{sup 3} and at 298 K. Prior to exchange experiments it was attempted to prepare homoionic forms of the zeolite by exhaustive treatments with appropriate salt solutions of cations. With no binary exchanges, full replacement of the cation by the ammonium ion is observed, which conflicts with some earlier work on clinoptilolite. Despite the observed partial exchange levels, clinoptilolite shows a very high preference for ammonium ion over sodium and calcium but not over potassium. Thermodynamic values for the exchanges were calculated and compared with data in the literature. Both the selectivity and thermodynamic affinity sequence, in agreement with previous work reported in the literature, are K{sup +} > NH{sub 4}{sup +} > Na{sup +} > Ca{sup 2+}.

  17. Biodegradation of rocket propellant waste, ammonium perchlorate (United States)

    Naqvi, S. M. Z.; Latif, A.


    The short term effects of ammonium perchlorate on selected organisms were studied. A long term experiment was also designed to assess the changes incurred by ammonium perchlorate on the nitrogen and chloride contents of soil within a period of 3 years. In addition, an attempt was made to produce methane gas from anaerobic fermentation of the aquatic weed, Alternanthera philoxeroides.

  18. Paper-based analytical device for instrumental-free detection of thiocyanate in saliva as a biomarker of tobacco smoke exposure. (United States)

    Pena-Pereira, Francisco; Lavilla, Isela; Bendicho, Carlos


    This work describes a fast and simple assay for in situ detection of thiocyanate, i.e., a biomarker of tobacco smoke exposure, in human saliva. The assay is based on the formation of an iron(III)-thiocyanate colored complex in a paper-based sensing platform and subsequent image analysis using a scanner as detection device. Experimental parameters influencing the color intensity of the complex were fully evaluated, including the selection of detection conditions, type of paper substrate, test zone dimensions and composition as well as the stability of the paper-based device. Under optimal conditions, the detection limit was 0.06mM of thiocyanate, and the repeatability, expressed as relative standard deviation, was 3%. The proposed method, characterized by its simplicity, portability and low sample consumption, was applied to the detection of thiocyanate in a series of human saliva samples. Average thiocyanate levels in the ranges 0.28-0.87mM and 0.78-4.28mM were found for non-smokers and smokers, respectively. Recovery studies were carried out at two concentration levels, showing recovery values in the range of 96.1-103.6%.

  19. Effects of ammonium concentration and charge exchange on ammonium recovery from high strength wastewater using a microbial fuel cell

    NARCIS (Netherlands)

    Kuntke, P.; Geleij, M.; Bruning, H.; Zeeman, G.; Hamelers, H.V.M.; Buisman, C.J.N.


    Ammonium recovery using a 2 chamber microbial fuel cell (MFC) was investigated at high ammonium concentration. Increasing the ammonium concentration (from 0.07 g to 4 g ammonium-nitrogen/L) by addition of ammonium chloride did not affect the performance of the MFC. The obtained current densities by

  20. 49 CFR 176.415 - Permit requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers. (United States)


    ... nitrates, and certain ammonium nitrate fertilizers. 176.415 Section 176.415 Transportation Other... requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers. (a) Except as... Captain of the Port (COTP). (1) Ammonium nitrate UN1942, ammonium nitrate fertilizers containing more...

  1. The nucleation kinetics of ammonium metavanadate precipitated by ammonium chloride (United States)

    Du, Guangchao; Sun, Zhaohui; Xian, Yong; Jing, Han; Chen, Haijun; Yin, Danfeng


    The nucleation kinetics of ammonium metavanadate (NH4VO3) was investigated under conditions of the simulated process for precipitation of NH4VO3 from the vanadium-containing solution. Induction periods for the nucleation of NH4VO3 were experimentally determined as a function of supersaturation at temperatures from 30 to 45 °C. Using the classical nucleation theory, the interfacial tension between NH4VO3 and supersaturated solution, the nucleation rate and critical radius of nucleus for the homogeneous nucleation of NH4VO3 were estimated. With temperature increasing, the calculated interfacial tension gradually decreased from 29.78 mJ/m2 at 30 °C to 23.66 mJ/m2 at 45 °C. The nucleation rate was found to proportionally increase but the critical radius of nucleus exponentially decreased, with increase in supersaturation ratio at a constant temperature. The activation energy for NH4VO3 nucleation was obtained from the relationship between temperature and induction period, ranging from 79.17 kJ/mol at S=25 to 115.50 kJ/mol at S=15. FT-IR and Raman spectrum indicated that the crystals obtained in the precipitation process were NH4VO3.

  2. Mechanism and regulation of peroxidase-catalyzed nitric oxide consumption in physiological fluids: critical protective actions of ascorbate and thiocyanate. (United States)

    Rees, Martin D; Maiocchi, Sophie L; Kettle, Anthony J; Thomas, Shane R


    Catalytic consumption of nitric oxide (NO) by myeloperoxidase and related peroxidases is implicated as playing a key role in impairing NO bioavailability during inflammatory conditions. However, there are major gaps in our understanding of how peroxidases consume NO in physiological fluids, in which multiple reactive enzyme substrates and antioxidants are present. Notably, ascorbate has been proposed to enhance myeloperoxidase-catalyzed NO consumption by forming NO-consuming substrate radicals. However, we show that in complex biological fluids ascorbate instead plays a critical role in inhibiting NO consumption by myeloperoxidase and related peroxidases (lactoperoxidase, horseradish peroxidase) by acting as a competitive substrate for protein-bound redox intermediates and by efficiently scavenging peroxidase-derived radicals (e.g., urate radicals), yielding ascorbyl radicals that fail to consume NO. These data identify a novel mechanistic basis for how ascorbate preserves NO bioavailability during inflammation. We show that NO consumption by myeloperoxidase Compound I is significant in substrate-rich fluids and is resistant to competitive inhibition by ascorbate. However, thiocyanate effectively inhibits this process and yields hypothiocyanite at the expense of NO consumption. Hypothiocyanite can in turn form NO-consuming radicals, but thiols (albumin, glutathione) readily prevent this. Conversely, where ascorbate is absent, glutathione enhances NO consumption by urate radicals via pathways that yield S-nitrosoglutathione. Theoretical kinetic analyses provide detailed insights into the mechanisms by which ascorbate and thiocyanate exert their protective actions. We conclude that the local depletion of ascorbate and thiocyanate in inflammatory microenvironments (e.g., due to increased metabolism or dysregulated transport) will impair NO bioavailability by exacerbating peroxidase-catalyzed NO consumption.

  3. Thiocyanate degradation by pure and mixed cultures of microorganisms Degradação de tiocianato por culturas puras e mixtas

    Directory of Open Access Journals (Sweden)

    Elaine M. Souza-Fagundes


    Full Text Available A mixed culture and a pure bacterial strain (BMV8 were isolated from a bioreactor for thiocyanate treatment. Both cultures removed 5 mM of thiocyanate from the medium in 36 hours. The mixed culture was able to tolerate concentrations up to 60 mM. The efficiency of thiocyanate degradation decreased when the cells were immobilized.Uma cultura mixta e uma linhagem bacteriana pura foram isoladas de um bioreator para tratamento de tiocianato. As culturas removeram 5mM de tiocianato do meio em 36 horas. A cultura mixta foi capaz de tolerar concentrações superiores a 60mM. A eficiência da degradação de tiocianato diminuiu quando as células foram imobilizadas.

  4. Determination of thiocyanate (biomarkers of ETS) and other inorganic ions in human nasal discharge samples using ion chromatography. (United States)

    Narkowicz, Sylwia; Polkowska, Żaneta; Marć, Mariusz; Simeonov, Vasil; Namieśnik, Jacek


    Environmental tobacco smoke (ETS) is a mixture of air and tobacco smoke containing more than 4000 chemical substances. In view of the health risks of many of these substances, studies are needed to determine biomarkers of exposure to ETS constituents in people who actively or passively are exposed to the toxic compounds. The methodologies for determining most biomarkers from saliva, urine and blood samples are known, but methods for analyzing these compounds in nasal discharges are not available. The objective of this work was to develop an analytical procedure for the determination of thiocyanate and other biomarker compounds in samples of nasal discharge using ion chromatography.

  5. Ammonium sulfate preparation from phosphogypsum waste

    Directory of Open Access Journals (Sweden)

    Abdel-Hakim T. Kandil


    Full Text Available The Egyptian phosphogypsum waste is treated using sulfuric acid prior the ammonium sulfate production. The relevant factors that would affect the removal efficiencies of some impurities are studied. The optimum conditions of the treatment are 8 M sulfuric acid solution and 1/4 solid/liquid ratio for 30 min contact time at 80 °C. Moreover, the optimum conditions of the ammonium sulfate preparation are 10 g of the suspended impure or purified phosphogypsum in 40 ml of 3% ammonium sulfate solution (as initiator, 1/4 solid/liquid ratio at pH7 at an addition of an excess ammonium carbonate, and 150 rpm stirring speed for 4.0 h contact time at 55 °C as well as the 5 mg of barium chloride is added to remove the radium in the ammonium sulfate product. Finally, the ammonium sulfate is crystallized and the chemical analysis of the product shows 20% nitrogen and 23.6% sulfur. Therefore, the purity of the obtained ammonium sulfate is 95% from the purified phosphogypsum.

  6. Combined effects of perchlorate, thiocyanate, and iodine on thyroid function in the National Health and Nutrition Examination Survey 2007–08

    Energy Technology Data Exchange (ETDEWEB)

    Steinmaus, Craig, E-mail: [Office of Environmental Health Hazard Assessment, California Environmental Protection Agency, 1515 Clay St. 16th Floor, Oakland, CA 94612 (United States); Miller, Mark D., E-mail: [Office of Environmental Health Hazard Assessment, California Environmental Protection Agency, 1515 Clay St. 16th Floor, Oakland, CA 94612 (United States); Cushing, Lara, E-mail: [Energy and Resources Group, 310 Barrows Hall, University of California, Berkeley, CA 93720-3050 (United States); Blount, Benjamin C., E-mail: [Division of Laboratory Sciences, National Center for Environmental Health, Centers for Disease Control and Prevention, 4770 Buford Highway, NE, Mail Stop F47, Atlanta, GA (United States); Smith, Allan H., E-mail: [Arsenic Health Effects Research Group, 1950 Addison St., Suite 204, University of California, Berkeley, CA 94704 (United States)


    Perchlorate, thiocyanate, and low iodine intake can all decrease iodide intake into the thyroid gland. This can reduce thyroid hormone production since iodide is a key component of thyroid hormone. Previous research has suggested that each of these factors alone may decrease thyroid hormone levels, but effect sizes are small. We hypothesized that people who have all three factors at the same time have substantially lower thyroid hormone levels than people who do not, and the effect of this combined exposure is substantially larger than the effects seen in analyses focused on only one factor at a time. Using data from the 2007–2008 National Health and Nutrition Examination Survey, subjects were categorized into exposure groups based on their urinary perchlorate, iodine, and thiocyanate concentrations, and mean serum thyroxine concentrations were compared between groups. Subjects with high perchlorate (n=1939) had thyroxine concentrations that were 5.0% lower (mean difference=0.40 μg/dl, 95% confidence interval=0.14–0.65) than subjects with low perchlorate (n=2084). The individual effects of iodine and thiocyanate were even smaller. Subjects with high perchlorate, high thiocyanate, and low iodine combined (n=62) had thyroxine concentrations 12.9% lower (mean difference=1.07 μg/dl, 95% confidence interval=0.55–1.59) than subjects with low perchlorate, low thiocyanate, and adequate iodine (n=376). Potential confounders had little impact on results. Overall, these results suggest that concomitant exposure to perchlorate, thiocyanate, and low iodine markedly reduces thyroxine production. This highlights the potential importance of examining the combined effects of multiple agents when evaluating the toxicity of thyroid-disrupting agents. -- Highlights: ► Recent data suggest that essentially everyone in the US is exposed to perchlorate. ► Perchlorate exposure may be associated with lower thyroid hormone levels. ► Some groups may be more susceptible to

  7. Substrate specificity of Rhbg: ammonium and methyl ammonium transport. (United States)

    Nakhoul, Nazih L; Abdulnour-Nakhoul, Solange M; Boulpaep, Emile L; Rabon, Edd; Schmidt, Eric; Hamm, L Lee


    Rhbg is a nonerythroid membrane glycoprotein belonging to the Rh antigen family. In the kidney, Rhbg is expressed at the basolateral membrane of intercalated cells of the distal nephron and is involved in NH4+ transport. We investigated the substrate specificity of Rhbg by comparing transport of NH3/NH4+ with that of methyl amine (hydrochloride) (MA/MA+), often used to replace NH3/NH4+, in oocytes expressing Rhbg. Methyl amine (HCl) in solution exists as neutral methyl amine (MA) in equilibrium with the protonated methyl ammonium (MA+). To assess transport, we used ion-selective microelectrodes and voltage-clamp experiments to measure NH3/NH4+- and MA/MA+-induced intracellular pH (pH(i)) changes and whole cell currents. Our data showed that in Rhbg oocytes, NH3/NH4+ caused an inward current and decrease in pH(i) consistent with electrogenic NH4+ transport. These changes were significantly larger than in H2O-injected oocytes. The NH3/NH4+-induced current was not inhibited in the presence of barium or in the absence of Na+. In Rhbg oocytes, MA/MA+ caused an inward current but an increase (rather than a decrease) in pH(i). MA/MA+ did not cause any changes in H2O-injected oocytes. The MA/MA+-induced current and pH(i) increase were saturated at higher concentrations of MA/MA+. Amiloride inhibited MA/MA+-induced current and the increase in pH(i) in oocytes expressing Rhbg but had no effect on control oocytes. These results indicate that MA/MA+ is transported by Rhbg but differently than NH3/NH4+. The protonated MA+ is likely a direct substrate whose transport resembles that of NH4+. Transport of electroneutral MA is also enhanced by expression of Rhbg.

  8. Al(HSO_4)_3/silica gel as a novel catalytic system for the ring opening of epoxides with thiocyanate anion under solvent-free conditions

    Institute of Scientific and Technical Information of China (English)

    Ali; Reza; Kiasat; Arash; Mouradzadegun; Somayeh; Elahi; Mehdi; Fallah-Mehrjardi


    For the first time,metal hydrogen sulfates and phosphates/silica gel have been studied as efficient and powerful solid acid catalysts in the ring opening of epoxides with thiocyanate anion.The most significant result was obtained by Al(HSO_4)_3/SiO_2 which afforded the corresponding β-hydroxy thiocyanates under mild reaction conditions and in very short reaction times.The cheapness, availability of the catalyst,ease of procedure and work-up make this method attractive for the organic synthesis.

  9. Kinetic analysis of phenol, thiocyanate and ammonia-nitrogen removals in an anaerobic-anoxic-aerobic moving bed bioreactor system

    Energy Technology Data Exchange (ETDEWEB)

    Sahariah, Biju Prava [Centre for the Environment, Indian Institute of Technology Guwahati, Assam 781039 (India); Chakraborty, Saswati, E-mail: [Department of Civil Engineering, Indian Institute of Technology Guwahati, Assam 781039 (India)


    A simulated wastewater containing phenol (2500 mg/L), thiocyanate and ammonia-nitrogen (500 mg/L) was treated in an anaerobic (R1)-anoxic (R2)-aerobic (R3) moving bed biofilm reactor system at different hydraulic retention time (HRT) intervals (total HRT 3-8 days, R1: 1.5-4 days; R2: 0.75-2 days and R3: 0.75-2 days) and feed thiocyanate (SCN{sup -}) concentrations (110-600 mg/L) to determine substrate removal kinetics. In R1, phenol and COD reduction and specific methanogenic activity were inhibited due to the increase of SCN{sup -} in feed. Bhatia et al. model having inbuilt provision of process inhibition described the kinetics of COD and phenol utilization with maximum utilization rates of 0.398 day{sup -1} and 0.486 day{sup -1}, respectively. In R2 and R3 modified Stover-Kincannon model was suitable to describe substrate utilization. In R2 respective maximum SCN{sup -}, phenol, COD and NO{sub 3}{sup -}N utilization rates were 0.23, 5.28, 37.7 and 11.82 g/L day, respectively. In aerobic reactor R3, COD, SCN{sup -} and NH{sub 4}{sup +}-N removal rates were, respectively, 10.53, 1.89, and 2.17 g/L day. The minimum total HRT of three-stage system was recommended as 4 days.

  10. 77 FR 65532 - Solid Fertilizer Grade Ammonium Nitrate From the Russian Federation: Notice of Rescission of... (United States)


    ... International Trade Administration Solid Fertilizer Grade Ammonium Nitrate From the Russian Federation: Notice... the antidumping duty order on solid fertilizer grade ammonium nitrate (ammonium nitrate) from the... Administrative Review: Solid Fertilizer Grade Ammonium Nitrate (Ammonium Nitrate) from the Russian...

  11. A Selective Membrane Electrode for Thiocyanate Ion Based on a Bis-taurine-salicylic Binuclear Copper(Ⅱ) Complex as Ionophore

    Institute of Scientific and Technical Information of China (English)

    王福昌; 柴雅琴; 袁若; 陈春华; 戴建远; 徐岚


    The response characteristics of a new potentiometric membrane electrode with unique selectivity towards thiocyanate ion were reported. The electrode was prepared by incorporating bis-taurine-salicylic binuclear copper(Ⅱ) complex into a plasticized PVC-membrane. The resulting electrode exhibits anti-Hofmeister selectivity sequence: SCN->I-> ClO4- >Sal-> NO3- > NO2- >Br->Cl-> SO3- > SO42- and a near-Nernstian potential linear range for thiocyanate from 1.0×10-1 to 1.0× 10-6 mol·L-1 with a detection limit of 8.0× 10-7 mol·L-1 and a slope of - 56.5 mV/PCSCN- in phosphate buffer solution of pH 5.0 at 20 ℃. The UV/Vis spectra, IR spectroscopy and AC impedance studies showed that the excellent selectivity to thiocyanate was related to the unique interaction between the central metal and the analyte and a steric effect associated with the structure of the carrier. The electrode was successfully applied to the determination of thiocyanate in waste water and human urine samples.

  12. High plasma thiocyanate levels are associated with enhanced myeloperoxidase-induced thiol oxidation and long-term survival in subjects following a first myocardial infarction

    DEFF Research Database (Denmark)

    Nedoboy, P E; Morgan, P E; Mocatta, T J;


    Elevated levels of myeloperoxidase (MPO) are associated with poor cardiovascular outcomes. MPO uses H2O2 to generate oxidants including HOCl and HOSCN, from chloride and thiocyanate (SCN(-)) ions, respectively. SCN(-) is the preferred substrate. Elevation of this anion decreases HOCl generation...

  13. Simultaneous determination of copper and lead in seawater using optimised thin-mercury film electrodes in situ plated in thiocyanate media. (United States)

    Carapuça, Helena M; Monterroso, Sandra C C; Rocha, Luciana S; Duarte, Armando C


    In the present work the anodic stripping voltammetric (ASV) methodology using a thin mercury film electrode in situ plated in thiocyanate media was re-assessed in order to allow the simultaneous determination of copper and lead in seawater. Under previously suggested conditions [6], i.e. using a concentration of thiocyanate of 5mM, the ASV peaks of copper and lead overlapped due to the formation of a stable copper(I)-thiocyanate species, limiting the analytical determinations. Therefore, the best value for the thiocyanate concentration was re-evaluated: for 0.05mM a trade-off between good resolution of the copper and lead peaks and high reproducibility of the mercury film formation/removing processes was achieved. In this media, the ASV peaks for Pb and Cu occurred, separated by 140mV. Also, the in situ thin mercury film electrode was produced and removed with good repeatability, which was confirmed by the relative standard deviation values for the ASV determinations: 0.5% for Pb and 2.0% for Cu (10 replicate determinations in a solution with metal concentrations 1.5x10(-8)M for lead and 2.2x10(-8)M for copper). The optimised methodology was successfully applied to the determination of copper in the presence of lead, in certified seawater (NASS-5).

  14. Comments on the paper: Synthesis growth and characterization of copper mercury thiocyanate crystal [Indian J Pure & App Phys 49 (2011) 340-343


    Srinivasan, Bikshandarkoil R.


    The unit cell parameters, infrared and UV-Vis spectral data reported in the paper by Vijayabhaskaran et al (Indian J Pure & App Phys 49 (2011) 340-343) cannot belong to the colourless crystalline compound formulated as copper mercury thiocyanate CuHg(SCN)4 as claimed by the authors.

  15. Natural Nitrogen—15 Abundance of Ammonium Nitrogen and Fixed Ammonium in Soils

    Institute of Scientific and Technical Information of China (English)



    The present article deals with the natural nitrogen-15 abundance of ammonium nitrogen and fixed ammonium in different soils.Variations in the natural 15N abundance of ammonium nitrogen mineralized in soils under anaerobic incubation condition were related to soil pH.The δ 15N of mineralizable N in acid soils was lower but that in neutral and calcareous soils was higher compared with the δ 15N of total N in the soils.A variation tendence was also found in the δ 15N of amino-acid N in the hydrolysates of soils.The natural 15N abundance of fixed ammonium was higher than that of total N in most surface soils and other soil horizons,indicating that the increase of δ 15N in the soil borizons beneath subsurface horizon of some forest soils and acid paddy soils was related to the higher δ 15N value of fixed ammonium in the soil.

  16. Calcium sulphate in ammonium sulphate solution (United States)

    Sullivan, E.C.


    Calcium sulphate, at 25?? C., is two-thirds as soluble in dilute (o.i mol per liter) and twice as soluble in concentrated (3 mois per liter) ammonium sulphate solution as in water. The specific electric conductivity of concentrated ammonium sulphate solutions is lessened by saturating with calcium sulphate. Assuming that dissociation of ammonium sulphate takes place into 2NH4?? and SO4" and of calcium sulphate into Ca and SO4" only, and that the conductivity is a measure of such dissociation, the solubility of calcium sulphate in dilute ammonium sulphate solutions is greater than required by the mass-law. The conductivity of the dilute mixtures may be accurately calculated by means of Arrhenius' principle of isohydric solutions. In the data obtained in these calculations, the concentration of non-dissociated calcium sulphate decreases with increasing ammonium sulphate. The work as a whole is additional evidence of the fact that we are not yet in possession of all the factors necessary for reconciling the mass-law to the behavior of electrolytes. The measurements above described were made in the chemical laboratory of the University of Michigan.

  17. Reduction in Ammonium Ions in Sludge Liquor

    Directory of Open Access Journals (Sweden)

    Eglė Šlajūtė


    Full Text Available Liquor rejected from the centrifugation of the digested sludge can contain the concentrations of ammonium ions up to 1750 mg/L. These loads are usually returned to the intake of wastewater treatment plants (WWTP without additional treatment and can have a negative impact on biological wastewater and/or sludge treatment processes, e.g. phosphorus and nitrogen removal. This article deals with the use of naturally obtained sorbent, zeolite, in batch and column test procedure for removing ammonium from the rejected liquor. This research study was carried out using different sizes of zeolite particles: 0.8–1.6 mm and 1.6–2.5 mm. The highest efficiency of ammonium removal (up to 98 % was achieved by applying the zeolite particles of 0.8–1.6 mm.Article in Lithuanian

  18. Chronic toxicity of erythromycin thiocyanate to Daphnia magna in a flow-through, continuous exposure test system (United States)

    Meinertz, J.R.; Schreier, T.M.; Bernardy, J.A.


    Approval of a new animal drug application for AQUAMYCIN 100?? (erythromycin thiocyanate; ET) to treat freshwater salmonid species with bacterial kidney disease is being pursued in the US. As part of the approval process, ETs impact on an aquatic environment had to be described in an environmental assessment. The environmental assessment was lacking data to characterize the effect ET would have on a chronically exposed aquatic invertebrate organism. A major step to fulfilling the environmental assessment was completed after conducting a comprehensive study continuously exposing Daphnia magna to ET for 21 days. Results indicated that the no observable effect concentration for ET was 179 ??g/L. ?? 2011 Springer Science+Business Media, LLC (outside the USA).

  19. Phase equilibria study of the binary systems (N-hexylisoquinolinium thiocyanate ionic liquid + organic solvent or water). (United States)

    Królikowska, Marta; Karpińska, Monika; Zawadzki, Maciej


    Liquid-liquid phase equilibria (LLE) of binary mixtures containing a room-temperature ionic liquid N-hexylisoquinolinium thiocyanate, [HiQuin][SCN] with an aliphatic hydrocarbon (n-hexane, n-heptane), aromatic hydrocarbon (benzene, toluene, ethylbenzene, n-propylbenzene), cyclohexane, thiophene, water, and 1-alcohol (1-ethanol, 1-butanol, 1-hexanol, 1-octanol, 1-decanol) have been determined using a dynamic method from room temperature to the boiling-point of the solvent at ambient pressure. N-hexylisoquinolinium thiocyanate, [HiQuin][SCN] has been synthesized from N-hexyl-isoquinolinium bromide as a substrate. Specific basic characterization of the new compound including NMR spectra, elementary analysis, and water content have been done. The density and viscosity of pure ionic liquid were determined over a wide temperature range from 298.15 to 348.15 K. The mutual immiscibility with an upper critical solution temperature (UCST) for the binary systems {IL + aliphatic hydrocarbon, cyclohexane, or water} was detected. In the systems of {IL + aromatic hydrocarbon or thiophene} an immiscibility gap with a lower critical solution temperature (LCST) was observed. Complete miscibility in the liquid phase, over a whole range of ionic liquid mole fraction, was observed for the binary mixtures containing IL and an 1-alcohol. For the tested binary systems with immiscibility gap {IL + aliphatic hydrocarbon, aromatic hydrocarbon, cyclohexane, thiophene, or water}, the parameters of the LLE correlation have been derived using the NRTL equation. The basic thermal properties of the pure IL, that is, the glass-transition temperature as well as the heat capacity at the glass-transition temperature, have been measured using a differential scanning microcalorimetry technique (DSC). Decomposition of the IL was detected by simultaneous thermogravimetric/differential thermal analysis (TG/DTA) experiments.

  20. Analysis of perchlorate, thiocyanate, nitrate and iodide in human amniotic fluid using ion chromatography and electrospray tandem mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    Blount, Benjamin C. [Division of Laboratory Sciences, National Center for Environmental Health, Centers for Disease Control and Prevention, Atlanta, GA 30341 (United States)]. E-mail:; Valentin-Blasini, Liza [Division of Laboratory Sciences, National Center for Environmental Health, Centers for Disease Control and Prevention, Atlanta, GA 30341 (United States)


    Because of health concerns surrounding in utero exposure to perchlorate, we developed a sensitive and selective method for quantifying iodide, as well as perchlorate and other sodium-iodide symporter (NIS) inhibitors in human amniotic fluid using ion chromatography coupled with electrospray ionization tandem mass spectrometry. Iodide and NIS inhibitors were quantified using a stable isotope-labeled internal standards (Cl{sup 18}O{sub 4} {sup -}, S{sup 13}CN{sup -} and {sup 15}NO{sub 3} {sup -} with excellent assay accuracy of 100%, 98%, 99%, 95% for perchlorate, thiocyanate, nitrate and iodide, respectively, in triplicate analysis of spiked amniotic fluid sample). Excellent analytical precision (<5.2% RSD for all analytes) was found when amniotic fluid quality control pools were repetitively analyzed for iodide and NIS-inhibitors. Selective chromatography and tandem mass spectrometry reduced the need for sample cleanup, resulting in a rugged and rapid method capable of routinely analyzing 75 samples/day. Analytical response was linear across the physiologically relevant concentration range for the analytes. Analysis of a set of 48 amniotic fluid samples identified the range and median levels for perchlorate (0.057-0.71, 0.18 {mu}g/L), thiocyanate (<10-5860, 89 {mu}g/L), nitrate (650-8900, 1620 {mu}g/L) and iodide (1.7-170, 8.1 {mu}g/L). This selective, sensitive, and rapid method will help assess exposure of the developing fetus to low levels of NIS-inhibitors and their potential to inhibit thyroid function.

  1. On the evaporation of ammonium sulfate solution

    Energy Technology Data Exchange (ETDEWEB)

    Drisdell, Walter S.; Saykally, Richard J.; Cohen, Ronald C.


    Aqueous evaporation and condensation kinetics are poorly understood, and uncertainties in their rates affect predictions of cloud behavior and therefore climate. We measured the cooling rate of 3 M ammonium sulfate droplets undergoing free evaporation via Raman thermometry. Analysis of the measurements yields a value of 0.58 {+-} 0.05 for the evaporation coefficient, identical to that previously determined for pure water. These results imply that subsaturated aqueous ammonium sulfate, which is the most abundant inorganic component of atmospheric aerosol, does not affect the vapor-liquid exchange mechanism for cloud droplets, despite reducing the saturation vapor pressure of water significantly.

  2. Effects of Aromatic Ammoniums on Methyl Ammonium Lead Iodide Hybrid Perovskite Materials

    Directory of Open Access Journals (Sweden)

    Jianli Yang


    Full Text Available The introduction of bulky ammoniums into methyl ammonium lead iodide hybrid perovskites (MAPbI3 has emerged as a promising strategy to improve the properties of these materials. In the present work, we studied the effects of several aromatic ammoniums onto the structural, electronic, and optical properties of MAPbI3. Although powder XRD data suggest that the bulky cations are not involved in the bulk phase of the MAPbI3, a surprisingly large effect of the bulky cations onto the photoluminescence properties was observed.

  3. 生鲜牛乳中硫氰酸钠的风险评估研究%Risk Assessment of Sodium Thiocyanate in Raw Milk

    Institute of Scientific and Technical Information of China (English)

    许振伟; 郑小平; 韩奕奕; 孟瑾


    采用离子色谱法对上海地区的500批次生鲜牛乳中硫氰酸钠含量进行检测。结果表明:生鲜牛乳中硫氰酸钠含量总体情况符合Pearson5分布(皮尔逊V型分布),90%的数据分布在0.2~3.71 mg/kg之间,最小、最大、平均含量分别为0.2、9.66和1.5 mg/kg。基于乳制品中硫氰酸钠的每日摄入量和点评估方法得到硫氰酸钠的膳食暴露量为2.0μg/kg标准人每日,结合相关的硫氰酸钠的风险评估研究,表明本研究中上海地区生鲜牛乳中的硫氰酸钠的含量属于正常的生理浓度,对人体正常膳食无健康影响。%Sodium thiocyanate in raw milk for 500 batch samples in Shanghai was tested and analyzed by ion chromatographic method .The results show that sodium thiocyanate in raw milk was accord with Pearson 5 distribution in general.The percentage of 90 was during 0.2 to 3.71mg/kg.The minimum, maximum and av-erage value was 9.66, 0.2 and 1.50mg/kg.Based on sodium thiocyanate in milk product intake and point e-valuation method , sodium thiocyanate dietary exposure was 2μg/kg one day for one person .According to other risk assessment associated with sodium thiocyanate , the concentration of sodium thiocyanate in raw milk in Shanghai area by the study was of normal physiological concentration .It was no health effects on the human body by normal diet .

  4. Review of Ammonium Dinitramide Toxicity Studies (United States)


    reproductive toxicant in rats, causing implantation failure in early gestation; follow-on studies implied that ADN is embryotoxic . EPR studies indicated that...mutagenic. 15. SUBJECT TERMS Ammonium dinitramide, ADN, toxicity, reproductive, embryotoxic , genotoxicity 16. SECURITY CLASSIFICATION OF: U 17...reproductive studies, reproduction and fertility, pre-implantation and post-implantation studies, implied that ADN is embryotoxic . A mouse embryo

  5. Detonation characteristics of ammonium nitrate products

    NARCIS (Netherlands)

    Kersten, R.J.A.; Hengel, E.I.V. van den; Steen, A.C. van der


    The detonation properties of ammonium nitrate (AN) products depend on many factors and are therefore, despite the large amount of information on this topic, difficult to assess. In order to further improve the understanding of the safety properties of AN, the European Fertilizer Manufacturers Associ

  6. Topaz concentrate desiliconization with ammonium bifluoride


    Andreev, V. A.; Buynovskiy, A. S.; Andreev, Artyom Andreevich; Dyachenko, Alexander Nikolaevich


    Fluoridizing agent for the process of topaz concentrate desiliconization has been selected, topaz thermodynamic potentials have been appraised, thermodynamic probabilities of fluorination reaction of topaz concentrate main constituents have been calculated. The results of studying the concentrate desiliconization process with ammonium bifluoride by the methods of thermogravimetry, RFA, microphotography are presented

  7. 21 CFR 184.1141b - Ammonium phosphate, dibasic. (United States)


    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium phosphate, dibasic. 184.1141b Section 184... Listing of Specific Substances Affirmed as GRAS § 184.1141b Ammonium phosphate, dibasic. (a) Ammonium phosphate, dibasic ((NH4)2HPO4, CAS Reg. No. 7783-28-0) is manufactured by reacting ammonia with...

  8. 21 CFR 172.165 - Quaternary ammonium chloride combination. (United States)


    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Quaternary ammonium chloride combination. 172.165... HUMAN CONSUMPTION Food Preservatives § 172.165 Quaternary ammonium chloride combination. The food additive, quaternary ammonium chloride combination, may be safely used in food in accordance with...

  9. 78 FR 32690 - Certain Ammonium Nitrate From Ukraine (United States)


    ... COMMISSION Certain Ammonium Nitrate From Ukraine Determination On the basis of the record \\1\\ developed in... antidumping duty order on certain ammonium nitrate from Ukraine would be likely to lead to continuation or... Publication 4396 (May 2013), entitled Certain Ammonium Nitrate from Ukraine: Investigation No....

  10. 21 CFR 184.1296 - Ferric ammonium citrate. (United States)


    ... citrate (iron (III) ammonium citrate) is prepared by the reaction of ferric hydroxide with citric acid, followed by treatment with ammonium hydroxide, evaporating, and drying. The resulting product occurs in two forms depending on the stoichiometry of the initial reactants. (1) Ferric ammonium citrate (iron...

  11. RNA extraction from various recalcitrant plant tissues with a cethyltrimethylammonium bromide-containing buffer followed by an acid guanidium thiocyanate-phenol-chloroform treatment. (United States)

    Suzuki, Yuji; Mae, Tadahiko; Makino, Amane


    High-quality total RNA was extracted using a cethyltrimethylammonium bromide-containing buffer followed by an acid guanidium thiocyanate-phenol-chloroform treatment from recalcitrant plant tissues such as tree leaves (pine, Norway spruce, ginkgo, Japanese cedar, rose), flowers (rose, Lotus japonicus) and storage tissues (seeds of Lotus japonicus and rice, sweet potato tuber, banana fruit). This protocol greatly reduced the time required for RNA extraction.

  12. Electric field-induced hole transport in copper(i) thiocyanate (CuSCN) thin-films processed from solution at room temperature

    KAUST Repository

    Pattanasattayavong, Pichaya


    The optical, structural and charge transport properties of solution-processed films of copper(i) thiocyanate (CuSCN) are investigated in this work. As-processed CuSCN films of ∼20 nm in thickness are found to be nano-crystalline, highly transparent and exhibit intrinsic hole transporting characteristics with a maximum field-effect mobility in the range of 0.01-0.1 cm2 V-1 s-1. © 2013 The Royal Society of Chemistry.

  13. Quaternary ammonium compounds – New occupational hazards

    Directory of Open Access Journals (Sweden)

    Agnieszka Lipińska-Ojrzanowska


    Full Text Available Quaternary ammonium compounds (QACs, quats belong to organic ionic chemical agents which display unique properties of both surfactants and disinfectants. Their wide distribution in the work environment and also in private households brings about new occupational hazards. This paper reviews reports about the health effects of QACs. QACs could play a role of sensitizers and irritants to the skin and mucous membranes. It is suspected that particular QACs can display an immunologic crossreactivity between each other and with other chemical compounds containing ammonium ion, such as muscle relaxants widely used in anesthesia. They may promote the development of airway allergy, however, the background mechanisms are still unclear and need to be further investigated. Until now, a few cases of occupational asthma induced by QACs have been described and their involvement in contact dermatitis has been documented. The possibility of anaphylaxis due to QACs cannot be excluded as well. Med Pr 2014;65(5:675–682

  14. Detonation Properties of Ammonium Dinitramide (ADN) (United States)

    Wätterstam, A.; Östmark, H.; Helte, A.; Karlsson, S.


    Ammonium Dinitramide, ADN, has a potential as an oxidizer for underwater high explosives. Pure ADN has a large reaction-zone length and shows a strong non-ideal behaviour. The work presented here is an extension of previous work.(Sensitivity and Performance Characterization of Ammonium Dinitramide (ADN). Presented at 11th International Detonation Symposium, Snowmass, CO, 1998.) Experiments for determining the detonation velocity as a function of inverse charge radius and density, reaction-zone length and curvature, and the detonation pressure are presented. Measurements of pressure indicates that no, or weak von-Neumann spike exists, suggesting an immediate chemical decomposition. Experimental data are compared with predicted using thermochemical codes and ZND-theory.

  15. Thiocyanate-free asymmetric ruthenium(II) dye sensitizers containing azole chromophores with near-IR light-harvesting capacity (United States)

    Wu, Guohua; Kaneko, Ryuji; Islam, Ashraful; Zhang, Yaohong; Sugawa, Kosuke; Han, Liyuan; Shen, Qing; Bedja, Idriss; Gupta, Ravindra Kumar; Otsuki, Joe


    A new series of thiocyanate-free bis-tridentate Ru(II) complexes containing azole ligands as well as an organometallic Ru-C bond are synthesized, characterized, and evaluated in dye-sensitized solar cells (DSSCs). CF3-substituted pyrazolyl, CF3-substituted triazolyl, and tetrazolyl derivatives are employed as ligands in the three neutral complexes PYZ, TRZ, and TEZ dyes, respectively. Despite their different structures, all the three complexes exhibit similar absorption features and panchromatic absorption covering the visible and near-IR regions. By switching from a pyrazolyl via triazolyl to tetrazolyl moiety in the ligand, the photocurrent value, open-circuit voltage, and overall efficiency are increased accordingly under the same conditions. Among them, photon-to-current conversion efficiency (ƞ) of TEZ dye reaches the maximum of 6.44% with a short-circuit photocurrent density (Jsc) of 17.8 mA cm-2, an open-circuit photovoltage (Voc) of 0.54 V and fill factor (FF) of 0.67 under illumination of an AM1.5G solar simulator. TEZ dye shows a good long term light soaking stability and maintains up to more than 90% of the initial power conversion efficiency after 1000 h.

  16. Colorimetric and atomic absorption spectrometric determination of mucolytic drug ambroxol through ion-pair formation with iron and thiocyanate. (United States)

    Levent, Abdulkadir; Sentürk, Zühre


    Colorimetric and atomic absorption spectrometric methods have been developed for the determination of mucolytic drug Ambroxol. These procedures depend upon the reaction of iron(III) metal ion with the drug in the presence of thiocyanate ion to form stable ion-pair complex which extractable chloroform. The red-coloured complex was determined either colorimetrically at 510 nm or by indirect atomic absorption spectrometry (AAS) via the determination of the iron content in the formed complex. The optimum experimental conditions for pH, concentrations of Fe(3+) and SCN(-), shaking time, phase ratio, and the number of extractions were determined. Under the proposed conditions, linearity was obeyed in the concentration ranges 4.1x10(-6) - 5.7x10(-5) M (1.7-23.6 µg mL(-1)) using both methods, with detection limits of 4.6x10(-7) M (0.19 µg mL(-1)) for colorimetry and 1.1x10(-6) M (0.46 µg mL(-1)) for AAS. The proposed methods were applied for the determination of Ambroxol in tablet dosage forms. The results obtained were statistically analyzed and compared with those obtained by applying the high-performance liquid chromatographic method with diode-array detection.

  17. Spectrophotometric determination of ampicillin, dicluxacillin, flucloxacillin and amoxicillin antibiotic drugs: ion-pair formation with molybdenum and thiocyanate. (United States)

    Mohamed, G G


    A sensitive spectrophotometric method is developed for the determination of some antibiotic drugs such as ampicillin (amp), dicluxacillin (dicl), flucloxacillin (fluc) and amoxicillin (amox). The method involves the formation of ion-pairs between these drugs under investigation and inorganic complex of Mo (V) thiocyanate followed by its extraction with methylene chloride. The optimum conditions for the ion-pairs formation are established. The method permits the determination of amp, dicl, fluc and amox over a concentration range of 1.5-77.5, 3-75, 1.5-79 and 7.5-75 microg ml(-1) respectively. The sensitivity (S) is found to be 0.017, 0.061, 0.014 and 0.073 microg cm(-2) for amp, dicl, fluc and amox, respectively. The method is simple, rapid, reproducible and accurate within +/- 1%. The method is applicable for the assay of the four drugs under investigation in different dosage forms and the results are in good agreement with those obtained by the official method.

  18. Quantitation of low concentrations of polysorbates in high protein concentration formulations by solid phase extraction and cobalt-thiocyanate derivatization. (United States)

    Kim, Justin; Qiu, Jinshu


    A spectrophotometric method was developed to quantify low polysorbate (PS) levels in biopharmaceutical formulations containing high protein concentrations. In the method, Oasis HLB solid phase extraction (SPE) cartridge was used to extract PS from high protein concentration formulations. After loading a sample, the cartridge was washed with 4M guanidine HCl and 10% (v/v) methanol, and the retained PS was eluted by acetonitrile. Following the evaporation of acetonitrile, aqueous cobalt-thiocyanate reagent was added to react with the polyoxyethylene oxide chain of polysorbates to form a blue colored PS-cobaltothiocyante complex. This colored complex was then extracted into methylene chloride and measured spectrophotometrically at 620 nm. The method performance was evaluated on three products containing 30-40 mg L(-1) PS-20 and PS-80 in ≤70 g L(-1) protein formulations. The method was specific (no matrix interference identified in three types of protein formulations), sensitive (quantitation limit of 10 mg L(-1) PS) and robust with good precision (relative standard deviation ≤6.4%) and accuracy (spike recoveries from 95% to 101%). The linear range of the method for both PS-20 and PS-80 was 10 to 80 mg L(-1) PS. By diluting samples with 6M guanidine HCl and/or using different methylene chloride volumes to extract the colored complexes of standards and samples, the method could accurately and precisely quantify 40 mg L(-1) PS in up to 300 g L(-1) protein formulations.

  19. Polyphasic bacterial community analysis of an aerobic activated sludge removing phenols and thiocyanate from coke plant effluent

    Energy Technology Data Exchange (ETDEWEB)

    Felfoldi, T.; Szekely, A.J.; Goral, R.; Barkacs, K.; Scheirich, G.; Andras, J.; Racz, A.; Marialigeti, K. [Eotvos Lorand University, Budapest (Hungary). Dept. of Microbiology


    Biological purification processes are effective tools in the treatment of hazardous wastes such as toxic compounds produced in coal coking. In this study, the microbial community of a lab-scale activated sludge system treating coking effluent was assessed by cultivation-based (strain isolation and identification, biodegradation tests) and culture-independent techniques (sequence-aided T-RFLP, taxon-specific PCR). The results of the applied polyphasic approach showed a simple microbial community dominated by easily culturable heterotrophic bacteria. Comamonas badia was identified as the key microbe of the system, since it was the predominant member of the bacterial community, and its phenol degradation capacity was also proved. Metabolism of phenol, even at elevated concentrations (up to 1500 mg/L), was also presented for many other dominant (Pseudomonas, Rhodanobacter, Oligella) and minor (Alcaligenes, Castellaniella, Microbacterium) groups, while some activated sludge bacteria (Sphingomonas, Rhodopseudomonas) did not tolerate it even in lower concentrations (250 mg/L). In some cases, closely related strains showed different tolerance and degradation properties. Members of the genus Thiobacillus were detected in the activated sludge, and were supposedly responsible for the intensive thiocyanate biodegradation observed in the system. Additionally, some identified bacteria (e.g. C. badia and the Ottowia-related strains) might also have had a significant impact on the structure of the activated sludge due to their floc-forming abilities.

  20. Stable Ammonium Bisulfate Clusters in the Atmosphere (United States)

    Vehkamäki, Hanna; Napari, Ismo; Kulmala, Markku; Noppel, Madis


    Liquid drop model based equilibrium thermodynamics predicts that in the presence of even small ammonia concentrations practically all the atmospheric sulfuric acid molecules are bound to tiny, stable ammonium-bisulfate clusters. Hitherto sulfuric acid has been believed to form hydrates with water. Thermodynamic theory predicts correctly the hydrate formation observed experimentally. Results from ab initio computer simulations contradict the thermodynamic results and also the experimental findings for cluster formation in both sulfuric acid-water and ammonia-sulfuric acid-water mixtures.

  1. Synthesis of novel quaternary ammonium surfactants containing adamantane

    Institute of Scientific and Technical Information of China (English)

    Jian Wei Guo; Xing Zhong; Hua Zhu; Li Juan Feng; Ying De Cui


    A series of novel quaternary ammonium surfactants containing adamantane were designed and synthesized from 1-adamantanecarboxylic acid.The structures of target surfactants were confirmed by 1H NMR,elements analysis and FTIR.Surface properties of these surfactants were investigated.Due to the lipophilicity of adamantane,the critical micelle concentration (CMC) and C20 values of the synthesized quaternary ammonium surfactants are lower than that of conventional quaternary ammonium surfactants.

  2. Reassimilation of ammonium in Lotus japonicus. (United States)

    Betti, Marco; García-Calderón, Margarita; Pérez-Delgado, Carmen M; Credali, Alfredo; Pal'ove-Balang, Peter; Estivill, Guillermo; Repčák, Miroslav; Vega, José M; Galván, Francisco; Márquez, Antonio J


    This review summarizes the most recent results obtained in the analysis of two important metabolic pathways involved in the release of internal sources of ammonium in the model legume Lotus japonicus: photorespiratory metabolism and asparagine breakdown mediated by aparaginase (NSE). The use of photorespiratory mutants deficient in plastidic glutamine synthetase (GS2) enabled us to investigate the transcriptomics and metabolomic changes associated with photorespiratory ammonium accumulation in this plant. The results obtained indicate the existence of a coordinate regulation of genes involved in photorespiratory metabolism. Other types of evidence illustrate the multiple interconnections existing among the photorespiratory pathway and other processes such as intermediate metabolism, nodule function, and secondary metabolism in this plant, all of which are substantially affected in GS2-deficient mutants because of the impairment of the photorespiratory cycle. Finally, the importance of asparagine metabolism in L. japonicus is highlighted because of the fact that asparagine constitutes the vast majority of the reduced nitrogen translocated between different organs of this plant. The different types of NSE enzymes and genes which are present in L. japonicus are described. There is a particular focus on the most abundant K(+)-dependent LjNSE1 isoform and how TILLING mutants were used to demonstrate by reverse genetics the importance of this particular isoform in plant growth and seed production.

  3. Ammonium nitrate: a promising rocket propellant oxidizer (United States)

    Oommen; Jain


    Ammonium nitrate (AN) is extensively used in the area of fertilizers and explosives. It is present as the major component in most industrial explosives. Its use as an oxidizer in the area of propellants, however, is not as extensive as in explosive compositions or gas generators. With the growing demand for environmental friendly chlorine free propellants, many attempts have been made of late to investigate oxidizers producing innocuous combustion products. AN, unlike the widely used ammonium perchlorate, produces completely ecofriendly smokeless products. Besides, it is one of the cheapest and easily available compounds. However, its use in large rocket motors is restricted due to some of its adverse characteristics like hygroscopicity, near room temperature phase transformation involving a volume change, and low burning rate (BR) and energetics. The review is an attempt to consolidate the information available on the various issues pertaining to its use as a solid propellant oxidizer. Detailed discussions on the aspects relating to phase modifications, decomposition chemistry, and BR and energetics of AN-based propellants, are presented. To make the review more comprehensive brief descriptions of the history, manufacture, safety, physical and chemical properties and various other applications of the salt are also included. Copyright 1999 Elsevier Science B.V.

  4. Cation effects on rotational dynamics of anions and water molecules in alkali (Li+, Na+, K+, Cs+) thiocyanate (SCN-) aqueous solutions. (United States)

    Bian, Hongtao; Chen, Hailong; Zhang, Qiang; Li, Jiebo; Wen, Xiewen; Zhuang, Wei; Zheng, Junrong


    Waiting time dependent rotational anisotropies of SCN(-) anions and water molecules in alkali thiocyanate (XSCN, X = Li, Na, K, Cs) aqueous solutions at various concentrations were measured with ultrafast infrared spectroscopy. It was found that cations can significantly affect the reorientational motions of both water molecules and SCN(-) anions. The dynamics are slower in a solution with a smaller cation. The reorientational time constants follow the order of Li(+) > Na(+) > K(+) ~/= Cs(+). The changes of rotational time constants of SCN(-) at various concentrations scale almost linearly with the changes of solution viscosity, but those of water molecules do not. In addition, the concentration-dependent amplitudes of dynamical changes are much more significant in the Li(+) and Na(+) solutions than those in the K(+) and Cs(+) solutions. Further investigations on the systems with the ultrafast vibrational energy exchange method and molecular dynamics simulations provide an explanation for the observations: the observed rotational dynamics are the balanced results of ion clustering and cation/anion/water direct interactions. In all the solutions at high concentrations (>5 M), substantial amounts of ions form clusters. The structural inhomogeneity in the solutions leads to distinct rotational dynamics of water and anions. The strong interactions of Li(+) and Na(+) because of their relatively large charge densities with water molecules and SCN(-) anions, in addition to the likely geometric confinements because of ion clustering, substantially slow down the rotations of SCN(-) anions and water molecules inside the ion clusters. The interactions of K(+) and Cs(+) with water or SCN(-) are much weaker. The rotations of water molecules inside ion clusters of K(+) and Cs(+) solutions are not significantly different from those of other water species so that the experimentally observed rotational relaxation dynamics are only slightly affected by the ion concentrations.

  5. Thiocyanate, calcium and sulfate as causes of toxicity to Ceriodaphnia dubia in a hard rock mining effluent. (United States)

    Brix, Kevin V; Gerdes, Robert; Grosell, Martin


    A series of Toxicity Identification Evaluations (TIEs) to identify the cause(s) of observed toxicity to Ceriodaphnia dubia have been conducted on a hard rock mining effluent. Characteristic of hard rock mining discharges, the effluent has elevated (∼3000 mg l(-1)) total dissolved solids (TDS) composed primarily of Ca(2+) and SO(4)(2-). The effluent typically exhibits 6-12 toxic units (TUs) when tested with C. dubia. Phase I and II toxicity identification evaluations (TIEs) indicated Ca(2+) and SO(4)(2-) contributed only ∼4 TUs of toxicity, but this was likely an underestimate due to problems with simulating the supersaturated CaSO(4) concentrations in the effluent. Treatment of the effluent with BaCO(3) to precipitate Ca(2+) and SO(4)(2-) revealed that these ions contribute ∼6 TUs of the observed toxicity, but the remaining source(s) of toxicity (up to 6 TUs) remained unidentified. Subsequent investigations identified thiocyanate (SCN(-)) in the effluent at 100-150 μM. Toxicity tests reveal that C. dubia are sensitive to SCN(-) with an estimated IC25 of 8.3 μΜ for reproduction in moderately hard water suggesting between 12 and 18 TUs of toxicity in the effluent. Additional experiments demonstrated that SCN(-) toxicity is reduced in the high TDS matrix of the mining effluent. Testing of a mock effluent simulating the major ion and SCN(-) concentrations resulted in 10.4 TUs, suggesting that Ca(2+), SO(4)(2-) and SCN(-) are the three toxicants present in this effluent. This research suggests SCN(-) may be a more common cause of toxicity in mining effluents than is generally recognized.

  6. New family of thiocyanate-bridged Re(IV)-SCN-M(II) (M = Ni, Co, Fe, and Mn) heterobimetallic compounds: synthesis, crystal structure, and magnetic properties. (United States)

    González, Ricardo; Acosta, Alvaro; Chiozzone, Raúl; Kremer, Carlos; Armentano, Donatella; De Munno, Giovanni; Julve, Miguel; Lloret, Francesc; Faus, Juan


    The heterobimetallic complexes of formula [(Me(2)phen)(2)M(μ-NCS)Re(NCS)(5)]·CH(3)CN [Me(2)phen = 2,9-dimethyl-1,10-phenanthroline and M = Ni (1), Co (2), Fe (3), and Mn (4)] have been prepared, and their crystal structures have been determined by X-ray diffraction on single crystals. Compounds 1-4 crystallize in the monoclinic C2/c space group, and their structure consists of neutral [(Me(2)phen)(2)M(μ-NCS)Re(NCS)(5)] heterodinuclear units with a Re-SCN-M bridge. Each Re(IV) ion in this series is six-coordinated with one sulfur and five nitrogen atoms from six thiocyanate groups building a somewhat distorted octahedral environment, whereas the M(II) metal ions are five-coordinated with four nitrogen atoms from two bidentate Me(2)phen molecules and a nitrogen atom from the bridging thiocyanate describing distorted trigonal bipyramidal surroundings. The values of the Re···M separation through the thiocyanate bridge in 1-4 vary in the range 5.903(1)-6.117(3) Å. The magnetic properties of 1-4 as well as those of the parent mononuclear Re(IV) compounds (NBu(4))(2)[Re(NCS)(6)] (A1) (NBu(4)(+) = tetra-n-butylammonium cation) and [Zn(NO(3))(Me(2)phen)(2)](2)[Re(NCS)(5)(SCN)] (A2) were investigated in the temperature range 1.9-300 K. Weak antiferromagnetic interactions between the Re(IV) and M(II) ions across the bridging thiocyanate were found in 1-4 [J = -4.3 (1), -2.4 (2), -1.8 (3), and -1.2 cm(-1) (4), the Hamiltonian being defined as Ĥ = -JŜ(Re)·Ŝ(M)]. The magnetic behavior of A2 is that of a magnetically diluted Re(IV) complex with a large and positive value of the zero-field splitting for the ground level (D(Re) = +37.0 cm(-1)). In the case of A1, although its magnetic behavior is similar to that of A2 in the high-temperature range (D(Re) being +19.0 cm(-1)), it exhibits a weak ferromagnetism below 3.0 K with a canting angle of 1.3°.

  7. Cysteine, thiourea and thiocyanate interactions with clays: FT-IR, Mössbauer and EPR spectroscopy and X-ray diffractometry studies. (United States)

    de Santana, Henrique; Paesano, Andrea; da Costa, Antonio C S; di Mauro, Eduardo; de Souza, Ivan G; Ivashita, Flávio F; de Souza, Cláudio M D; Zaia, Cássia T B V; Zaia, Dimas A M


    The present study examined the adsorption of cysteine, thiourea and thiocyanate on bentonite and montmorillonite at two different pHs (3.00, 8.00). The conditions used here are closer to those of prebiotic earth. As shown by FT-IR, Mössbauer and EPR spectroscopy and X-ray diffractometry, the most important finding of this work is that cysteine and thiourea penetrate into the interlayer of the clays and reduce Fe(3+) to Fe(2+), and as consequence, cystine and c,c'-dithiodiformamidinium ion are formed. This mechanism resembles that which occurs with aconitase. This is a very important result for prebiotic chemistry; we should think about clays not just sink of molecules, but as primitive vessels of production of biomolecules. At pH 8.00, an increasing expansion was observed in the following order for both minerals: thiourea > thiocyanate > cysteine. At pH 3.00, the same order was not observed and thiourea had an opposite behavior, being the compound producing the lowest expansion. Mössbauer spectroscopy showed that at pH 8.00, the proportion of Fe(2+) ions in bentonite increased, doubling for thiourea, or more than doubling for cysteine, in both clays. However, at pH 3.00, cysteine and thiourea did not change significantly the relative amount of Fe(2+) and Fe(3+) ions, when compared to clays without adsorption. For thiocyanate, the amount of Fe(2+) produced was independent of the pH or clay used, probably because the interlayers of clays are very acidic and HSCN formed does not reduce Fe(3+) to Fe(2+). For the interaction of thiocyanate with the clays, it was not possible to identify any potential compound formed. For the samples of bentonite and montmorillonite at pH 8.00 with cysteine, EPR spectroscopy showed that intensity of the lines due to Fe(3+) decreased because the reaction of Fe(3+)/cysteine. Intensity of EPR lines did not change when the samples of bentonite at pH 3.00 with and without cysteine were compared. These results are in accordance with those

  8. Hole-transporting transistors and circuits based on the transparent inorganic semiconductor copper(I) thiocyanate (CuSCN) processed from solution at room temperature

    KAUST Repository

    Pattanasattayavong, Pichaya


    The wide bandgap and highly transparent inorganic compound copper(I) thiocyanate (CuSCN) is used for the first time to fabricate p-type thin-film transistors processed from solution at room temperature. By combining CuSCN with the high-k relaxor ferroelectric polymeric dielectric P(VDF-TrFE-CFE), we demonstrate low-voltage transistors with hole mobilities on the order of 0.1 cm2 V-1 s-1. By integrating two CuSCN transistors, unipolar logic NOT gates are also demonstrated. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Determination of traces of Mo in soils and geological materials by solvent extraction of the molybdenum-thiocyanate complex and atomic absorption. (United States)

    Kim, C H; Owens, C M; Smythe, L E


    Comprehensive studies of the extraction of the molybdenum-thiocyanate complex with methyl isobutyl ketone have resulted in an improved method for the determination of traces of molybdenum in soils and geological materials by atomic-absorption spectroscopy. The method is applicable in the range 1-500 ppm Mo, with 1-g samples, giving relative standard deviations not exceeding about 8% at a level of 1 ppm. The limit of detection is 0.1 ppm. There are few interferences, and large quantities of iron are without effect.

  10. Unsteady growth of ammonium chloride dendrites (United States)

    Martyushev, L. M.; Terentiev, P. S.; Soboleva, A. S.


    Growth of ammonium chloride dendrites from aqueous solution is experimentally investigated. The growth rate υ and the radius ρ of curvature of branches are measured as a function of the relative supersaturation Δ for steady and unsteady growth conditions. It is shown that the experimental results are quantitatively described by the dependences ρ=a/Δ+b, υ=cΔ2, where the factors for primary branches are a=(1.3±0.2)·10-7 m, b=(2.5±0.4)·10-7 m, and c=(2.2±0.3)·10-4 m/s. The factor c is found to be approximately 7 times smaller for the side branches than that for the primary branches.

  11. Efficient cellulose solvent: quaternary ammonium chlorides. (United States)

    Kostag, Marc; Liebert, Tim; El Seoud, Omar A; Heinze, Thomas


    Pure quaternary tetraalkylammonium chlorides with one long alkyl chain dissolved in various organic solvents constitute a new class of cellulose solvents. The electrolytes are prepared in high yields and purity by Menshutkin quaternization, an inexpensive and easy synthesis route. The pure molten tetraalkylammonium chlorides dissolve up to 15 wt% of cellulose. Cosolvents, including N,N-dimethylacetamide (DMA), may be added in large excess, leading to a system of decreased viscosity. Contrary to the well-established solvent DMA/LiCl, cellulose dissolves in DMA/quaternary ammonium chlorides without any pretreatment. Thus, the use of the new solvent avoids some disadvantages of DMA/LiCl and ionic liquids, the most extensively employed solvents for homogeneous cellulose chemistry.

  12. Hydration Structure of the Quaternary Ammonium Cations

    KAUST Repository

    Babiaczyk, Wojtek Iwo


    Two indicators of the hydropathicity of small solutes are introduced and tested by molecular dynamics simulations. These indicators are defined as probabilities of the orientation of water molecules\\' dipoles and hydrogen bond vectors, conditional on a generalized distance from the solute suitable for arbitrarily shaped molecules. Using conditional probabilities, it is possible to distinguish features of the distributions in close proximity of the solute. These regions contain the most significant information on the hydration structure but cannot be adequately represented by using, as is usually done, joint distance-angle probability densities. Our calculations show that using our indicators a relative hydropathicity scale for the interesting test set of the quaternary ammonium cations can be roughly determined. © 2010 American Chemical Society.

  13. 21 CFR 73.1298 - Ferric ammonium ferrocyanide. (United States)


    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false Ferric ammonium ferrocyanide. 73.1298 Section 73.1298 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL...) Identity. (1) The color additive ferric ammonium ferrocyanide is the blue pigment obtained by...

  14. How to make a living from anaerobic ammonium oxidation

    NARCIS (Netherlands)

    Kartal, B.; De Almeida, N.M.; Maalcke, W.J.; Op den Camp, H.J.M.; Jetten, M.S.M.; Keltjens, J.T.


    Anaerobic ammonium-oxidizing (anammox) bacteria primarily grow by the oxidation of ammonium coupled to nitrite reduction, using CO2 as the sole carbon source. Although they were neglected for a long time, anammox bacteria are encountered in an enormous species (micro)diversity in virtually any anoxi

  15. Ammonium removal from landfill leachate by anodic oxidation

    Energy Technology Data Exchange (ETDEWEB)

    Cabeza, Adelaida [Department of Chemical Engineering, University of Cantabria, Avda. de los Castros s/n. 39005 Santander (Spain); Urtiaga, Ane [Department of Chemical Engineering, University of Cantabria, Avda. de los Castros s/n. 39005 Santander (Spain)]. E-mail:; Rivero, Maria-Jose [Department of Chemical Engineering, University of Cantabria, Avda. de los Castros s/n. 39005 Santander (Spain); Ortiz, Inmaculada [Department of Chemical Engineering, University of Cantabria, Avda. de los Castros s/n. 39005 Santander (Spain)


    The feasibility of removing ammonium from landfill leachates by electrochemical oxidation was studied. Raw leachates and biologically/physico-chemically pretreated leachates from a municipal landfill site were treated. Boron doped diamond was used as anode and stainless steel as cathode, both electrodes with an area of 70 cm{sup 2}. The effects of the applied current density (15-90 mA cm{sup -2}), the initial ammonium concentration (480-2000 mg L{sup -1}), and the initial chloride concentration were experimentally studied. Total ammonium removal was obtained after 360 min of processing and almost half of the initial ammonium nitrogen was oxidized to nitrate. On the other hand, the concentration of chloride enhanced the rate of ammonium oxidation. In addition, the amount of N-NH{sub 4} {sup +} transformed into N-NO{sub 3} {sup -} decreased when additional chloride was provided.

  16. Seasonal patterns of ammonium regeneration from size-fractionated microheterotrophs (United States)

    Maguer, Jean-François; L'Helguen, Stéphane; Madec, Christian; Le Corre, Pierre


    Ammonium regeneration by size-fractionated plankton was measured for 1 year at a coastal station in the shallow well-mixed waters of the western English Channel. Rates of ammonium regeneration in the Journal of Plankton Research, 18, 355-370). Total ammonium regenerated in a year by the microheterotrophs was 15 g N m -2, equivalent to about 60% of the total nitrogen uptake. Microplankton (200-15 μm) accounted for about 50% of the regeneration measured between early spring and late summer. Percent contribution of nanoplankton to total ammonium regeneration varied considerably between the seasons, from very high (83-88%) levels in winter to very low (2-13%) levels in summer. Contribution by picoplankton (nano- and picoplankton fractions, appears to be different from that in deep well-mixed waters. Here, the relative contribution of ciliates and bacteria to ammonium regeneration shows little variation with an increase in macrozooplankton biomass.

  17. Spectrophotometric determination of some anti-tussive and anti-spasmodic drugs through ion-pair complex formation with thiocyanate and cobalt(II) or molybdenum(V) (United States)

    El-Shiekh, Ragaa; Zahran, Faten; El-Fetouh Gouda, Ayman Abou


    Two rapid, simple and sensitive extractive specrophotometric methods has been developed for the determination of anti-tussive drugs, e.g., dextromethorphan hydrobromide (DEX) and pipazethate hydrochloride (PiCl) and anti-spasmodic drugs, e.g., drotaverine hydrochloride (DvCl) and trimebutine maleate (TM) in bulk and in their pharmaceutical formulations. The proposed methods depend upon the reaction of cobalt(II)-thiocyanate (method A) and molybdenum(V)-thiocyanate ions (method B) with the cited drugs to form stable ion-pair complexes which extractable with an n-butnol-dichloromethane solvent mixture (3.5:6.5) and methylene chloride for methods A and B, respectively. The blue and orange red color complexes are determined either colorimetrically at λmax 625 nm (using method A) and 467 or 470 nm for (DEX and PiCl) or (DvCl and TM), respectively (using method B). The concentration range is 20-400 and 2.5-50 μg mL -1 for methods A and B, respectively. The proposed method was successfully applied for the determination of the studied drugs in pure and in pharmaceutical formulations applying the standard additions technique and the results obtained in good agreement well with those obtained by the official method.

  18. Phase equilibria study of the binary systems (1-butyl-3-methylimidazolium thiocyanate ionic liquid + organic solvent or water). (United States)

    Domańska, Urszula; Laskowska, M; Pobudkowska, Aneta


    (Solid + liquid) phase equilibria (SLE) for the binary systems, ionic liquid (IL) 1-butyl-3-methylimidazolium thiocyanate [BMIM][SCN] with an alcohol (1-octanol, 1-nonanol, 1-decanol, 1-undecanol, or 1-dodecanol) or water, and (liquid + liquid) phase equilibria (LLE) for the binary systems of [BMIM][SCN] with an alkane (n-hexane, n-heptane, n-octane, n-nonane, or n-decane), benzene, an alkylbenzenes (toluene or ethylbenzene), tetrahydrofuran (THF), cycloalkanes (cyclohexane or cycloheptane), or ethers (di-n-propyl ether, di-n-butyl ether, di-n-pentyl ether, n-butylmethyl ether, tert-butylmethyl ether (MTBE), or tert-butylethyl ether (ETBE)) have been determined at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from 250 to 430 K. In the case of systems IL + alkane, cycloalkane, or ether, the mutual immiscibility with an upper critical solution temperature (UCST) was detected, and in the systems of IL + benzene, alkylbenzene, or THF, the mutual immiscibility with a lower critical solution temperature (LCST) was observed. UV-vis spectroscopy was used to determine the very small compositions of the IL in the n-hexane (about 2 x 10(-5) IL mole fraction), benzene (about 2 x 10(-3) IL mole fraction), cyclohexane (about 2 x 10(-5) IL mole fraction), and THF (about 1.2 x 10(-2) IL mole fraction). For the binary systems containing alcohol, it was noticed that with increasing chain length of an alcohol, the solubility decreases. The basic thermal properties of the pure IL, that is, the glass-transition temperature as well as the heat capacity at the glass-transition temperature, have been measured using a differential scanning microcalorimetry technique (DSC). Decomposition of the IL was detected by the simultaneous TG/DTA experiments. Well-known UNIQUAC, Wilson, and NRTL equations have been used to correlate the experimental SLE data sets for alcohols and water. For the systems containing immiscibility gaps {IL + alkane

  19. 76 FR 49449 - Continuation of Antidumping Duty Order on Solid Fertilizer Grade Ammonium Nitrate From the... (United States)


    ... Nitrate From the Russian Federation AGENCY: Import Administration, International Trade Administration... duty investigation on solid fertilizer grade ammonium nitrate (``ammonium nitrate'') from the Russian... and the ITC instituted a second sunset review of the ammonium nitrate suspended investigation....

  20. 76 FR 23569 - Termination of the Suspension Agreement on Solid Fertilizer Grade Ammonium Nitrate From the... (United States)


    ... Nitrate From the Russian Federation and Notice of Antidumping Duty Order AGENCY: Import Administration... (``AD'') Investigation on Solid Fertilizer Grade Ammonium Nitrate from the Russian Federation (``the... determine whether imports of solid fertilizer grade ammonium nitrate (``ammonium nitrate'') from Russia...

  1. Regioselective ring opening of epoxides using NH4SCN/silica sulfuric acid: An efficient approach for the synthesis of β-hydroxy thiocyanate under solvent-free conditions

    Institute of Scientific and Technical Information of China (English)

    Ali R. Kiasat; Maryam Zayadi; Mehdi Fallah Mehrjardi


    Silica sulfuric acid was developed as a stable and efficient heterogeneous catalyst in organic synthesis. This solid acid catalyzed the regioselective ring opening of epoxides by thiocyanate anion to give thiocyanohydrins as key intermediates in agricultural and pharmaceutical chemistry in high yields under solvent-free conditions.

  2. Subcellular localization of ammonium transporters in Dictyostelium discoideum

    Directory of Open Access Journals (Sweden)

    Davis Carter T


    Full Text Available Abstract Background With the exception of vertebrates, most organisms have plasma membrane associated ammonium transporters which primarily serve to import a source of nitrogen for nutritional purposes. Dictyostelium discoideum has three ammonium transporters, Amts A, B and C. Our present work used fluorescent fusion proteins to determine the cellular localization of the Amts and tested the hypothesis that the transporters mediate removal of ammonia generated endogenously from the elevated protein catabolism common to many protists. Results Using RFP and YFP fusion constructs driven by the actin 15 promoter, we found that the three ammonium transporters were localized on the plasma membrane and on the membranes of subcellular organelles. AmtA and AmtB were localized on the membranes of endolysosomes and phagosomes, with AmtB further localized on the membranes of contractile vacuoles. AmtC also was localized on subcellular organelles when it was stabilized by coexpression with either the AmtA or AmtB fusion transporter. The three ammonium transporters exported ammonia linearly with regard to time during the first 18 hours of the developmental program as revealed by reduced export in the null strains. The fluorescently tagged transporters rescued export when expressed in the null strains, and thus they were functional transporters. Conclusion Unlike ammonium transporters in most organisms, which import NH3/NH4+ as a nitrogen source, those of Dictyostelium export ammonia/ammonium as a waste product from extensive catabolism of exogenously derived and endogenous proteins. Localization on proteolytic organelles and on the neutral contractile vacuole suggests that Dictyostelium ammonium transporters may have unique subcellular functions and play a role in the maintenance of intracellular ammonium distribution. A lack of correlation between the null strain phenotypes and ammonia excretion properties of the ammonium transporters suggests that it is not

  3. [Reasons of high concentration ammonium in Yellow River, China]. (United States)

    Zhang, Xue-qing; Xia, Xing-hui; Yang, Zhi-feng


    Ammonium nitrogen contamination is one of the major problems of the Yellow River in China. The speciation, concentration and sources of nitrogen compounds as well as the water environment conditions of the Yellow River had been analyzed to study the reasons for the fact that the ammonium nitrogen concentration was above the water quality standard. In addition, laboratory experiments had been carried out to investigate the effects of suspended sediment (SS) on nitrification rate. The results indicated that the presence of SS could accelerate the nitrification process, therefore, the effects of SS on nitrification rate was not the reason for the high level of ammonium nitrogen in the river. The excessive and continuous input of nitrogen contaminants to the river was the fundamental reason for the high concentration of ammonium nitrogen. Organic and ammonium nitrogen with high concentration inhibitted the nitrification processes. When the initial NH4+ -N concentrations were 10.1, 18.4 and 28.2 mg/L, nitrification efficiencies were 17.4%, 13.0% and 2.5%, respectively. When the initial organic nitrogen concentrations were 5.5 and 8.6 mg/L, the maximum concentrations of ammonium nitrogen produced by the oxidation of organic nitrogen would reach 0.47 and 1.69 mg/L and they would last for 2 days and 6 days, respectively. The oxygen-consuming organics and toxic substance existing in the river water could inhibit the activity of nitrifying bacteria, and thus lead to the accumulation of ammonium nitrogen. In addition, the high pH value of river water resulted in the high concentration of nonionic ammonium nitrogen which would reduce the activity of nitrifying bacteria and decrease the nitrification rates. Besides, low river runoff, low SS content and low activity of nitrifying bacteria resulted in the high level of ammonium nitrogen of the river in the low water season.

  4. Modelling an Ammonium Transporter with SCLS

    Directory of Open Access Journals (Sweden)

    Angelo Troina


    Full Text Available The Stochastic Calculus of Looping Sequences (SCLS is a recently proposed modelling language for the representation and simulation of biological systems behaviour. It has been designed with the aim of combining the simplicity of notation of rewrite systems with the advantage of compositionality. It also allows a rather simple and accurate description of biological membranes and their interactions with the environment.In this work we apply SCLS to model a newly discovered ammonium transporter. This transporter is believed to play a fundamental role for plant mineral acquisition, which takes place in the arbuscular mycorrhiza, the most wide-spread plant-fungus symbiosis on earth. Due to its potential application in agriculture this kind of symbiosis is one of the main focuses of the BioBITs project. In our experiments the passage of NH3 / NH4+ from the fungus to the plant has been dissected in known and hypothetical mechanisms; with the model so far we have been able to simulate the behaviour of the system under different conditions. Our simulations confirmed some of the latest experimental results about the LjAMT2;2 transporter. The initial simulation results of the modelling of the symbiosis process are promising and indicate new directions for biological investigations.

  5. Antimicrobial Polymeric Materials with Quaternary Ammonium and Phosphonium Salts

    Directory of Open Access Journals (Sweden)

    Yan Xue


    Full Text Available Polymeric materials containing quaternary ammonium and/or phosphonium salts have been extensively studied and applied to a variety of antimicrobial-relevant areas. With various architectures, polymeric quaternary ammonium/phosphonium salts were prepared using different approaches, exhibiting different antimicrobial activities and potential applications. This review focuses on the state of the art of antimicrobial polymers with quaternary ammonium/phosphonium salts. In particular, it discusses the structure and synthesis method, mechanisms of antimicrobial action, and the comparison of antimicrobial performance between these two kinds of polymers.

  6. 硝酸钠-硫氢酸铵-孔雀石绿体系浮选分离钴(Ⅱ)%Flotation separation of cobalt(Ⅱ) with sodium nitrate-Ammonium Thiocyanate-Malachite green

    Institute of Scientific and Technical Information of China (English)

    吴宏伟; 张庆爱; 郝永兵



  7. Separation of Copper by Sodium Chloride-Ammonium Thiocyanate-Cetylpyridinium Chloride Floatation System%氯化十六烷基吡啶盐水体系浮选分离铜的研究

    Institute of Scientific and Technical Information of China (English)

    吴艳平; 陈松涛


    研究了氯化钠-硫氰酸铵-氯化十六烷基吡啶体系浮选分离铜的行为及其与常见离子的分离.试验表明,在一定的条件下,控制pH<6,能使Cu(II)与常见离子Fe(Ⅲ),Al(Ⅲ),Co(Ⅱ),Ni(Ⅱ),Mn(Ⅱ),Cd(Ⅱ) 分离.

  8. Floatation Separation of Silver by Ammonium Thiocyanate-Cetylpyridinium Chloride-Salt-Water System%硫氰酸铵-氯化十六烷基吡啶盐水体系浮选分离银的研究

    Institute of Scientific and Technical Information of China (English)

    吴艳平; 郑海金; 卢维奇



  9. Assembling novel Cd(II) complexes with multidentate nitrogen donor ligands obtained in situ from the system: zerovalent copper, cadmium oxide, 1-hydroxymethyl-3,5-dimethylpyrazole and ammonium thiocyanate. (United States)

    Barszcz, Barbara; Masternak, Joanna; Sawka-Dobrowolska, Wanda


    A novel 3D coordination polymer [Cd2(L(1))(2)(SCN)(4)(MeOH)(2)](n) (1) and monomeric [Cd(NCS)(2)L(2)] (2) (L(1) = urotropine, L(2) = tris(1-(3,5-dimethylpyrazolylmethyl))amine) have been prepared in a one-pot synthesis using 1-hydroxymethyl-3,5-dimethylpyrazole as the starting ligand. The most prominent feature is the formation in situ of the organic compounds: urotropine and scorpionate-tripodal ligands.

  10. Determination of Sodium Thiocyanate Content in Milk by Ion Chromatography%离子色谱法测定乳品中硫氰酸钠含量

    Institute of Scientific and Technical Information of China (English)



    采用离子色谱法测定乳品中硫氰酸钠的含量。样品用5 mL乙腈沉淀蛋白质,上清液过C18柱净化,所得的产物采用离子色谱法测定,外标法定量。结果表明,通过流动相以及前处理方法的改进,硫氰酸钠质量浓度在0.10~4.00 mg/L范围内与色谱峰面积呈良好的线性,相关系数r2=1,方法的检出限为0.01 mg/L。在牛奶样品中加入硫氰酸钠标准溶液进行回收试验,测得回收率为95.0%~101.0%,测定结果的相对标准准偏差为1.8%~2.8%(n=7)。该方法操作简便,能有效避免假阳性的发生,测定结果准确,适合于乳品中硫氰酸钠的检测。%Ion chromatography was applied to the determination of sodium thiocyanate content in milk. The sample was purified by protein precipitation and the C18 extraction column. Then the product was tested by ion chromatography and the concentration was quantified by external standard method. Through the improment of mobile phase and pretreatment method,the concentration of sodium thiocyanate was linear with peak area in the range of 0.10–4.00 mg/L,and the correlation coefficient was r2=1. The detection limit determination of the method was 0.01 mg/L. Test recovery experiment was made by standard addition method,and the recovery was 95.0%–101.0%. The relative standard deviation of the determination results was 1.8%–2.8% (n=7). This method has the advantages of simple operation,it can effectively avoid the occurrence of false positive so it is suitable for detection of sodium thiocyanate in milk.

  11. 14N NQR and relaxation in ammonium nitrate (United States)

    Stephenson, David


    The complete 14N nuclear quadrupole resonance (NQR) spectrum of ammonium nitrate is presented recorded using two double resonance techniques - double contact cross relaxation and zero field NQR. The spectra gave the quadrupole coupling constant (Qcc) and asymmetry parameter ( η) values for the nitro of 611 kHz, 0.229 and that for the ammonium nitrogen of 242 kHz, 0.835. The three relaxation transition probabilities have been determined for both the nitro and ammonium nitrogen atoms. The bi-exponential relaxation times (T 1) were measured at 295 K. The values for nitro are 16.9 s and 10.5 s and that of the ammonium are 23.0 s and 16.4 s.

  12. Synthesis and Antibacterial Activity of Novel Quaternary Ammonium Pyridoxine Derivatives. (United States)

    Shtyrlin, Nikita V; Sapozhnikov, Sergey V; Koshkin, Sergey A; Iksanova, Alfiya G; Sabirov, Arthur H; Kayumov, Airat R; Nureeva, Aliya A; Zeldi, Marina I; Shtyrlin, Yurii G


    A series of 26 quaternary ammonium pyridoxine derivatives were synthesized and their cytotoxicity and antibacterial activities against clinically relevant bacterial strains were tested in vitro. The antibacterial activity of mono-ammonium salts increased with the rise of the lipophilicity and compound 3,3,5-trimethyl-8,8-dioctyl-1,7,8,9-tetrahydro-[1,3]dioxino[5,4-d]pyrrolo[3,4-b]pyridin-8-ium chloride (2d) reaches a maximum among them. Bis-ammonium salt of pyridoxine 4 with two dimethyloctylamine groups also demonstrated high antibacterial activity despite lower lipophilicity. The results of MTT assay indicated that HEK 293 cells were more sensitive than HSF to quaternary ammonium pyridoxine derivatives. Compounds 2d and 4 did not induce the damage of the DNA and might be of interest in the development of new antimicrobials.

  13. Direct esterification of ammonium salts of carboxylic acids (United States)

    Halpern, Yuval


    A non-catalytic process for producing esters, the process comprising reacting an ammonium salt of a carboxylic acid with an alcohol and removing ammonia from the reaction mixture. Selectivities for the desired ester product can exceed 95 percent.

  14. Ammonium removal by modified zeolite from municipal wastewater

    Institute of Scientific and Technical Information of China (English)

    ZHAO Ya-ping; GAO Ting-yao; JIANG Shang-ying; CAO Da-wen


    Ammonium removal by modified zeolite, H-form and Na-form zeolite, were examined by batch-type methods. The adsorption of ammonium on modified zeolite was exothermic process. The saturation adsorption capacity of ammonium on H-form and Na-form zeolite were 21.23 and 41.15 mg/g, respectively. After ten times adsorption- desorption-readsorption cycles the standard deviations of H-form and Na-form zeolite were 6.34% and 6.59%. The zeolite adsorption process has proved cost effective and practical in reducing ammonium by H-form and Na-form zeolite in municipal wastewater from concentration 27.68 mg/L to 2.80 mg/L and 5.91 mg/L.

  15. {sup 14}N NQR and relaxation in ammonium nitrate

    Energy Technology Data Exchange (ETDEWEB)

    Stephenson, David, E-mail: [University of the West Indies, Chemistry Department (Trinidad and Tobago)


    The complete {sup 14}N nuclear quadrupole resonance (NQR) spectrum of ammonium nitrate is presented recorded using two double resonance techniques – double contact cross relaxation and zero field NQR. The spectra gave the quadrupole coupling constant (Qcc) and asymmetry parameter (η) values for the nitro of 611 kHz, 0.229 and that for the ammonium nitrogen of 242 kHz, 0.835. The three relaxation transition probabilities have been determined for both the nitro and ammonium nitrogen atoms. The bi-exponential relaxation times (T {sub 1}) were measured at 295 K. The values for nitro are 16.9 s and 10.5 s and that of the ammonium are 23.0 s and 16.4 s.

  16. Fixed Ammonium Content and Maximum Capacity of Ammonium Fixation in Major Types of Tillage Soils in Hunan Province, China

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yang-zhu; HUANG Shun-hong; WAN Da-juan; HUANG Yun-xiang; ZHOU Wei-jun; ZOU Ying-bin


    In order to understand the status of fixed ammonium, fixed ammonium content, maximum capacity of ammonium fixation, and their influencing factors in major types of tillage soils of Hunan Province, China, were studied with sampling on fields, and laboratory incubation and determination. The main results are summarized as follows: (1) Content of fixed ammonium in the tested soils varies greatly with soil use pattern and the nature of parent material. For the paddy soils, it ranges from 135.4 ± 57.4 to 412.8±32.4 mg kg-1, with 304.7±96.7 mg kg-1 in average; while it ranges from 59.4 to 435.7 mg kg-1, with 230.1 ± 89.2 mg kg1 in average for the upland soils. The soils developed from limnic material and slate had higher fixed ammonium content than the soils developed from granite. The percentage of fixed ammonium to total N in the upland soils is always higher than that in the paddy soils. It ranges from 6.1 ± 3.6% to 16.6 ±4.6%, with 14.0% ± 5.1% in average for the paddy soils and it amounted to 5.8 ±2.0% to 40.1 ± 17.8%, with 23.5 ± 14.2% in average for upland soils. (2) The maximum capacity of ammonium fixation has the same trend with the fixed ammonium content in the tested soils. For all the tested soils, the percentage of recently fixed ammonium to maximum capacity of ammonium fixation is always bellow 20% and it may be due to the fact that the soils have high fertility and high saturation of ammonium-fixing site. (3) The clay content and clay composition in the tested soils are the two important factors influe ncing their fixed ammonium content and maximum capacity of ammonium fixation. The results showed that hydrous mica is the main 2:1 type clay mineral in <0.02 mm clay of the paddy soils, and its content in 0.02-0.002 mm clay is much higher than that in < 0.002 mm clay of the soils. The statistical analysis showed that both the fixed ammonium content and the maximum capacity of ammonium fixation of the paddy soils were positively correlated with

  17. Ammonium Metabolism Enzymes Aid Helicobacter pylori Acid Resistance



    The gastric pathogen Helicobacter pylori possesses a highly active urease to support acid tolerance. Urea hydrolysis occurs inside the cytoplasm, resulting in the production of NH3 that is immediately protonated to form NH4+. This ammonium must be metabolized or effluxed because its presence within the cell is counterproductive to the goal of raising pH while maintaining a viable proton motive force (PMF). Two compatible hypotheses for mitigating intracellular ammonium toxicity include (i) th...

  18. Mutagenicity of quaternary ammonium salts containing carbohydrate moieties

    Energy Technology Data Exchange (ETDEWEB)

    Dmochowska, Barbara [Department of Carbohydrate Chemistry, University of Gdansk, Sobieskiego 18, 80-952 Gdansk (Poland); Piosik, Jacek; Woziwodzka, Anna [Intercollegiate Faculty of Biotechnology, University of Gdansk and Medical University of Gdansk, Kladki 24, 80-822 Gdansk (Poland); Sikora, Karol; Wisniewski, Andrzej [Department of Carbohydrate Chemistry, University of Gdansk, Sobieskiego 18, 80-952 Gdansk (Poland); Wegrzyn, Grzegorz, E-mail: [Department of Molecular Biology, University of Gdansk, Kladki 24, 80-822 Gdansk (Poland)


    Highlights: {yields} A series of quaternary ammonium salts containing carbohydrate moieties, with configuration D-galacto, D-gluco and D-manno, was synthesized and characterized. {yields} The quaternary ammonium salts containing carbohydrate moieties revealed potent mutagenic activities, as assessed by using the Vibrio harveyi bioluminescence mutagenicity test. {yields} The N-[2-(D-glycopyranosyloxy)ethyl]-N,N,N-trimethylaminium salts were of the highest activity in the mutagenicity assay. {yields} We suggest that quaternary ammonium salts may be more hazardous than previously supposed. - Abstract: Quaternary ammonium salts are widely used in industrial, agricultural, healthcare and domestic applications. They are believed to be safe compounds, with little or no health hazard to humans. However, in this report, we demonstrate that a series of newly synthesized quaternary ammonium salts containing carbohydrate moieties reveal potent mutagenic activities, as assessed by using the Vibrio harveyi bioluminescence mutagenicity test. D-Gluco- and D-galacto-derivatives were found to have a higher mutagenic potential than D-manno-derivatives. Among the former groups of compounds, the N-[2-(D-glycopyranosyloxy)ethyl]-N,N,N-trimethylaminium salts were of the highest activity in the mutagenicity assay. These results suggest that the safety of quaternary ammonium salts may be lower than previously supposed, indicating a need for testing such compounds for their mutagenicity.

  19. Development of a New Class of Thiocyanate-Free Cyclometalated Ruthenium(II Complex for Sensitizing Nanocrystalline TiO2 Solar Cells

    Directory of Open Access Journals (Sweden)

    Surya Prakash Singh


    Full Text Available We designed and developed a new class of thiocyanate-free cyclometalated ruthenium sensitizers for sensitizing nanocrystalline TiO2 solar cells. This complex shows appreciably broad absorption range. Anchoring to nanocrystalline TiO2 films for light to electrical energy conversion in regenerative photoelectrochemical cells achieves efficient sensitization to TiO2 electrode. With this new sensitizer, there were a power conversion efficiency of 4.76%, a short-circuit photocurrent density of 11.21 mA/cm2, an open-circuit voltage of 0.62 V, and a fill factor of 0.68 obtained under standard AM 1.5 sunlight.

  20. 40 CFR 418.40 - Applicability; description of the ammonium nitrate subcategory. (United States)


    ... ammonium nitrate subcategory. 418.40 Section 418.40 Protection of Environment ENVIRONMENTAL PROTECTION... Ammonium Nitrate Subcategory § 418.40 Applicability; description of the ammonium nitrate subcategory. The provisions of this subpart are applicable to discharges resulting from the manufacture of ammonium...

  1. 76 FR 39847 - Solid Fertilizer Grade Ammonium Nitrate From the Russian Federation; Final Results of the... (United States)


    ... International Trade Administration Solid Fertilizer Grade Ammonium Nitrate From the Russian Federation; Final... investigation on solid fertilizer grade ammonium nitrate (``ammonium nitrate'') from the Russian Federation...: Solid Fertilizer Grade Ammonium Nitrate From the Russian Federation, 64 FR 45236 (August 19, 1999)....

  2. Fractionation of bamboo hemicelluloses by graded saturated ammonium sulphate. (United States)

    Guan, Ying; Zhang, Bing; Qi, Xian-Ming; Peng, Feng; Yao, Chun-Li; Sun, Run-Cang


    The hemicelluloses were isolated with 10% KOH at 25°C from dewaxed and delignified bamboo powder. The alkali-soluble hemicelluloses from Sinocalamus affinis were fractionated by ammonium sulphate precipitation method. The bamboo alkali-soluble hemicelluloses yielded seven hemicellulosic fractions obtained at 0, 5, 15, 25, 40, 55, and 70% saturation with ammonium sulphate. It was found that the more branched hemicelluloses were precipitated at higher ammonium sulphate concentrations (55 and 70%), the more linear hemicelluloses were precipitated at lower ammonium sulphate concentrations (0, 5, 15, 25, and 40%). The molecular weights of hemicellulosic fractions become lower from 35,270 (H0) to 18,680 (H70)gmol(-1) with the increasing concentrations of saturated ammonium sulphate from 0 to 70%. Based on the FT-IR, (1)H, (13)C and 2D HSQC NMR studies, the alkali-soluble hemicelluloses were 4-O-methyl-glucuronoarabinoxylans composed of the (1→4)-linked β-d-xylopyranosyl backbone with branches at O-3 of α-L-arabinofuranosyl or at O-2 of 4-O-methyl-α-d-glucuronic acid.

  3. A maritime pine antimicrobial peptide involved in ammonium nutrition. (United States)

    Canales, Javier; Avila, Concepción; Cánovas, Francisco M


    A large family of small cysteine-rich antimicrobial peptides (AMPs) is involved in the innate defence of plants against pathogens. Recently, it has been shown that AMPs may also play important roles in plant growth and development. In previous work, we have identified a gene of the AMP β-barrelin family that was differentially regulated in the roots of maritime pine (Pinus pinaster Ait.) in response to changes in ammonium nutrition. Here, we present the molecular characterization of two AMP genes, PpAMP1 and PpAMP2, showing different molecular structure and physicochemical properties. PpAMP1 and PpAMP2 displayed different expression patterns in maritime pine seedlings and adult trees. Furthermore, our expression analyses indicate that PpAMP1 is the major form of AMP in the tree, and its relative abundance is regulated by ammonium availability. In contrast, PpAMP2 is expressed at much lower levels and it is not regulated by ammonium. To gain new insights into the function of PpAMP1, we over-expressed the recombinant protein in Escherichia coli and demonstrated that PpAMP1 strongly inhibited yeast growth, indicating that it exhibits antimicrobial activity. We have also found that PpAMP1 alters ammonium uptake, suggesting that it is involved in the regulation of ammonium ion flux into pine roots.

  4. Effects of bisphenol A on ammonium assimilation in soybean roots. (United States)

    Sun, Hai; Wang, Li Hong; Zhou, Qing; Huang, Xiao Hua


    Bisphenol A (BPA), which is ubiquitous in the environment, is an example of an endocrine-disrupting compound (EDC). Ammonium assimilation has an important function in plant growth and development. However, insufficient information on the potential effect of BPA on ammonium assimilation in plants is available. In this study, the effects of BPA on ammonium assimilation in roots of soybean seedlings were investigated. During the stress period, 1.5 mg L(-1) of BPA improved glutamine synthetase (GS)/glutamate synthase (GOGAT) cycle and glutamate dehydrogenase (GDH) pathway in ammonium assimilation. The amino acid and the soluble protein contents increased in the soybeans. At 17.2 and 50.0 mg L(-1) of BPA, the GS/GOGAT cycle was inhibited and the GDH pathway was promoted. The amino acid content increased and the soluble protein content decreased. During the recovery period, the GS/GOGAT cycle and the GDH pathway recovered at 1.5 and 17.2 mg L(-1) of BPA but not at 50.0 mg L(-1) of BPA. The amino acid content continuously increased and the soluble protein content decreased compared with those in the control treatment. In summary, BPA treatment could affect the contents of soluble protein and amino acid in the soybean roots by regulating ammonium assimilation.

  5. Removing ammonium from water using modified corncob-biochar. (United States)

    Vu, Thi Mai; Trinh, Van Tuyen; Doan, Dinh Phuong; Van, Huu Tap; Nguyen, Tien Vinh; Vigneswaran, Saravanamuthu; Ngo, Huu Hao


    Ammonium pollution in groundwater and surface water is of major concern in many parts of the world due to the danger it poses to the environment and people's health. This study focuses on the development of a low cost adsorbent, specifically a modified biochar prepared from corncob. Evaluated here is the efficiency of this new material for removing ammonium from synthetic water (ammonium concentration from 10 to 100mg/L). The characteristics of the modified biochar were determined by Brunauer-Emmett-Teller (BET) test, Fourier transform infrared spectroscopy (FTIR) and Scanning electron microscopy (SEM). It was found that ammonium adsorption on modified biochar strongly depended on pH. Adsorption kinetics of NH4(+)-N using modified biochar followed the pseudo-second order kinetic model. Both Langmuir and Sips adsorption isotherm models could simulate well the adsorption behavior of ammonium on modificated biochar. The highest adsorption capacity of 22.6mg NH4(+)-N/g modified biochar was obtained when the biochar was modified by soaking it in HNO3 6M and NaOH 0.3M for 8h and 24h, respectively. The high adsorption capacity of the modified biochar suggested that it is a promising adsorbent for NH4(+)-N remediation from water.

  6. Difficultly Extractable Fixed Ammonium in Some Soils of China

    Institute of Scientific and Technical Information of China (English)



    Ninety-three soil samples and 19 sedimentary rock samples collected from 21 provinces of China were analyzed for their contents of fixed ammonium and total N by Kjeldahl-HF method.Results showed that amount of difficultly extractable fixed ammonium(the fixed ammonium that is not determinable by Kjeldahl procedures commonly used for soils) in soils ranged from 0 to 202 mg kg-1,It was generally more than 50 mg kg-1 in soils in Changji and Turpan districts,Xinjiang,accounting for 3.2%-36.8% with an average of 13.9% of the total N.For some Orthents derived from purple shale and purple sandstone in Sichuan and Hunan provinces and Chao soils derived from secondary loess in Henan Province and Ningxia Autonomous Region it was generally around 30 mg kg-1,accounting for 4%-7% of the total soil N,and for most of the rest of soils studied,with the exception of some subsoils,no or trace difficultly extractable fixed ammonium could be detected.It was sugested that the difficultly extractable fixed ammonium was originated from parent rock,and for slightly weathered soils derived from parent materials rich in this form of N the Kjeldahl method might give underestimation of total soil N.

  7. Quaternary ammonium salt derivatives of allylphenols with peripheral analgesic effect

    Directory of Open Access Journals (Sweden)

    A. B de Oliveira


    Full Text Available Ammonium salt derivatives of natural allylphenols were synthesized with the purpose of obtaining potential peripheral analgesics. These drugs, by virtue of their physicochemical properties, would not be able to cross the blood brain barrier. Their inability to enter into the central nervous system (CNS should prevent several adverse effects observed with classical opiate analgesics (Ferreira et al., 1984. Eugenol (1 O-methyleugenol (5 and safrole (9 were submitted to nitration, reduction and permethylation, leading to the ammonium salts 4, 8 and 12. Another strategy applied to eugenol (1, consisting in its conversion to a glycidic ether (13, opening the epoxide ring with secondary amines and methylation, led to the ammonium salts 16 and 17. All these ammonium salts showed significant peripheral analgesic action, in modified version of the Randall-Sellito test (Ferreira et al. 1978, at non-lethal doses. The ammonium salt 8 showed an activity comparable to that of methylnalorphinium, the prototype of an ideal peripheral analgesic (Ferreira et al., 1984.

  8. The biological activity of quaternary ammonium salts (QASs

    Directory of Open Access Journals (Sweden)

    Ewa Obłąk


    Full Text Available Quaternary ammonium salts (QASs, especially those of cationic surfactant character, are applied as antibacterial and antifungal disinfectants. QASs affect lipid-enveloped viruses, including human immunodeficiency virus (HIV and hepatitis B virus (HBV, but not non-enveloped viruses. These compounds are extensively used in domestic (as ingredients of shampoos, hair conditioners, agricultural (as fungicides, pesticides, insecticides, healthcare (as medications, and industrial applications (as biocides, fabric softeners, corrosion inhibitors. The extensive use of quaternary ammonium disinfectants in recent years has led to the development of resistance in microorganisms to these drugs. Thus [i]Staphylococcus[/i] [i]aureus[/i] strains contain the plasmid-carrying genes [i]qacA[/i] and [i]qacB [/i]encoding resistance to quaternary ammonium compounds and acriflavine. The membrane proteins QacA and QacB confer multidrug resistance by exporting the compound by the proton motive force which is generated by the transmembrane electrochemical proton gradient.

  9. [The biological activity of quaternary ammonium salts (QASs)]. (United States)

    Obłak, Ewa; Gamian, Andrzej


    Quaternary ammonium salts (QASs), especially those of cationic surfactant character, are applied as antibacterial and antifungal disinfectants. QASs affect lipid-enveloped viruses, including human immunodeficiency virus (HIV) and hepatitis B virus (HBV), but not non-enveloped viruses. These compounds are extensively used in domestic (as ingredients of shampoos, hair conditioners), agricultural (as fungicides, pesticides, insecticides), healthcare (as medications), and industrial applications (as biocides, fabric softeners, corrosion inhibitors). The extensive use of quaternary ammonium disinfectants in recent years has led to the development of resistance in microorganisms to these drugs. Thus Staphylococcus aureus strains contain the plasmid-carrying genes qacA and qacB encoding resistance to quaternary ammonium compounds and acriflavine. The membrane proteins QacA and QacB confer multidrug resistance by exporting the compound by the proton motive force which is generated by the transmembrane electrochemical proton gradient.

  10. Rocket Solid Propellant Alternative Based on Ammonium Dinitramide

    Directory of Open Access Journals (Sweden)

    Grigore CICAN


    Full Text Available Due to the continuous run for a green environment the current article proposes a new type of solid propellant based on the fairly new synthesized oxidizer, ammonium dinitramide (ADN. Apart of having a higher specific impulse than the worldwide renowned oxidizer, ammonium perchlorate, ADN has the advantage, of leaving behind only nitrogen, oxygen and water after decomposing at high temperatures and therefore totally avoiding the formation of hydrogen chloride fumes. Based on the oxidizer to fuel ratios of the current formulations of the major rocket solid booster (e.g. Space Shuttle’s SRB, Ariane 5’s SRB which comprises mass variations of ammonium perchlorate oxidizer (70-75%, atomized aluminum powder (10-18% and polybutadiene binder (12-20% a new solid propellant was formulated. As previously stated, the new propellant formula and its variations use ADN as oxidizer and erythritol tetranitrate as fuel, keeping the same polybutadiene as binder.

  11. Enrichment culture of marine anaerobic ammonium oxidation (anammox) bacteria

    Institute of Scientific and Technical Information of China (English)

    GUAN Yong-jie


    The present study investigates the enrichment of anaerobic ammonium oxidation (anammox) bacteria in the marine environment using sediment samples obtained from the East China Sea and discusses the nitrogen removal efficiency of marine anammox bioreactor. Enrichment of anammox bacteria with simultaneous removal of nitrite and ammonium ions was observed in the Anaerobic Sequencing Batch Reactor under a total nitrogen loading rate of 0.37kg-N m-3day-1. In this study, The nitrogen removal efficiency was up to 80% and the molar-reaction ratio of ammonium, nitrite and nitrate was 1.0:1.22:0.22 which was a little different from a previously reported ratio of 1.0:1.32:0.26 in a freshwater system.

  12. Performance of sulfate-dependent anaerobic ammonium oxidation

    Institute of Scientific and Technical Information of China (English)


    The performance of sulfate-dependent anaerobic ammonium oxidation was studied.The results showed that both SO42-and NH4+ were chemically stable under anaerobic conditions.They did not react with each other in the absence of biological catalyst(sludge).The anaerobic digested sludge cultivated in an anaerobic reactor for three years took on the ability of oxidizing ammonium with sulfate anaero-bically.The average reduction of sulfate and ammonium was 71.67 mg.L-1 and 56.82 mg.L-1 at high concentrations.The reaction between SO42-and NH4+ was difficult,though feasible,due to its low standard Gibbs free energy change.The experiment demonstrated that high substrate concentrations and low oxidation-reduction potential(ORP) may be favourable for the biological reaction.

  13. Performance of sulfate-dependent anaerobic ammo-nium oxidation

    Institute of Scientific and Technical Information of China (English)

    ZHANG Lei; ZHENG Ping; HE YuHui; JIN RenCun


    The performance of sulfate-dependent anaerobic ammonium oxidation was studied. The results showed that both SO42- and NH4+ were chemically stable under anaerobic conditions. They did not react with each other in the absence of biological catalyst (sludge). The anaerobic digested sludge cultivated in an anaerobic reactor for three years took on the ability of oxidizing ammonium with sulfate anaero-bically. The average reduction of sulfate and ammonium was 71.67 mg.L-1 and 56.82 mg.L-1 at high concentrations.The reaction between SO42- and NH4+ was difficult, though feasible, due to its low standard Gibbs free energy change. The experiment demonstrated that high substrate concentrations and low oxidation-reduction potential (ORP) may be favourable for the biological reaction.

  14. Steady state growth of E. Coli in low ammonium environment (United States)

    Kim, Minsu; Deris, Barret; Zhang, Zhongge; Hwa, Terry


    Ammonium is the preferred nitrogen source for many microorganisms. In medium with low ammonium concentrations, enteric bacteria turn on the nitrogen responsive (ntr) genes to assimilate ammonium. Two proteins in E. coli, Glutamine synthetase (GS) and the Ammonium/methylammonium transporter AmtB play crucial roles in this regard. GS is the major ammonium assimilation enzyme below 1mM of NH4 + . AmtB is an inner membrane protein that transports NH4 + across the cell membrane against a concentration gradient. In order to study ammonium uptake at low NH4 + concentration at neutral pH, we developed a microfluidic flow chamber that maintains a homogenous nutrient environment during the course of exponential cell growth, even at very low concentration of nutrients. Cell growth can be accurately monitored using time-lapse microscopy. We followed steady state growth down to micro-molar range of NH4 + for the wild type and Δ amtB strains. The wild type strain is able to maintain the growth rate from 10mM down to a few uM of NH4 + , while the mutant exhibited reduced growth below ~ 20 ~uM of NH4 + . Simultaneous characterization of the expression levels of GS and AmtB using fluorescence reporters reveals that AmtB is turned on already at 1mM, but contributes to function only below ~ 30 ~uM in the wild-type. Down to ~ 20 ~uM of NH4 + , E.~coli can compensate the loss of AmtB by GS alone.

  15. Colorimetric Determination of the Iron(III)-Thiocyanate Reaction Equilibrium Constant with Calibration and Equilibrium Solutions Prepared in a Cuvette by Sequential Additions of One Reagent to the Other (United States)

    Nyasulu, Frazier; Barlag, Rebecca


    The well-known colorimetric determination of the equilibrium constant of the iron(III-thiocyanate complex is simplified by preparing solutions in a cuvette. For the calibration plot, 0.10 mL increments of 0.00100 M KSCN are added to 4.00 mL of 0.200 M Fe(NO[subscript 3])[subscript 3], and for the equilibrium solutions, 0.50 mL increments of…

  16. Electroless deposition of bis(4'-(4-Pyridyl)-2,2':6',2''-terpyridine)iron(II) thiocyanate complex onto carbon nanotubes modified glassy carbon electrode: application to simultaneous determination of ascorbic acid, dopamine and uric acid


    Kamyabi,M. A; Narimani,O; Monfared,H. H


    A glassy carbon (GC) electrode modified by multi-walled carbon nanotubes (MWNTs) and bis(pyterpy)iron(II) thiocyanate complex (pyterpy = 4'-(4-pyridyl)-2,2':6',2''-terpyridine) was investigated by voltammetric methods in acetate buffer solution (pH 5). Performances of the iron(II)-complex/MWNTs modified electrode were evaluated with differential pulse voltammetry and scanning electron microscopy (SEM). The modified glassy carbon electrode shows an excellent electrochemical response for ascorb...

  17. Precipitation of phenyl and phenoxypenicillin from solutions using ammonium sulfate. (United States)

    Luengo, J M


    An easy, rapid, and available method for separating 6-aminopenicillanic acid (6-APA), benzylpenicillin (penicillin G), and other related molecules from aqueous solutions or complex industrial broths is described. A high concentration of ammonium sulphate induces partially or totally the precipitation of the penicillin present in the solutions, while 6-APA, phenylacetic, and phenoxyacetic acid always remain in the supernatant. The filtration through No. 4 Pyrex glass-fiber filter or Whatman 3MM paper permits the separation of the compounds present in the supernatant from the other ones precipitated. The precipitated product was identified, in all cases, as ammonium penicillin. This method is described here for the first time.

  18. Determination of Ammonium Ion in Lake Water by Voltammetry

    Institute of Scientific and Technical Information of China (English)

    Wu Yun-hua; Fei Jun-jie; Dang Xue-ping; Hu Sheng-shui


    An electroanalytical method for the determination of armonium ion using a platinized platinum electrode is described. Under optimized analytical conditions, the linear range of the calibration graphs for ammonium ion is 3. 0×10(-5)-5.0×10-3 mol·L-1.The Method has been applide to the determination of ammonium ion in lake water samples and recoveries of 100%-103%0 are obtained. The results obtained are found to be in good agreement with spectrophotometric results.

  19. Aerosol isotopic ammonium signatures over the remote Atlantic Ocean (United States)

    Lin, C. T.; Jickells, T. D.; Baker, A. R.; Marca, A.; Johnson, M. T.


    We report aerosol ammonium 15N signatures for samples collected from research cruises on the South Atlantic and Caribbean using a new high sensitivity method. We confirm a pattern of isotopic signals from generally light (δ15N -5 to -10‰), for aerosols with very low (ocean, to generally heavier values (δ15N +5 to +10‰), for aerosols collected in temperate and tropical latitudes and with higher ammonium concentrations (>2 nmol m-3). We discuss whether this reflects a mixing of aerosols from two end-members (polluted continental and remote marine emissions), or isotopic fractionation during aerosol transport.

  20. Mutagenic activity of quaternary ammonium salt derivatives of carbohydrates (United States)

    Sikora, Karol; Woziwodzka, Anna; Piosik, Jacek; Podgórska, Beata


    Summary This paper presents a study on a series of quaternary ammonium salt (QAS) derivatives of glucopyranosides with an elongated hydrophobic hydrocarbon chain. The new N-[6-(β-D-glucopyranosyloxy)hexyl]ammonium bromides and their O-acetyl derivatives were analyzed via 1H and 13C NMR spectroscopy. The mutagenic activity of the newly synthesized QAS was investigated using two different techniques: The Vibrio harveyi luminescence assay and the Ames test. The obtained results support previous findings contesting QAS safety and indicate that QAS, specifically pyridinium derivatives, might be mutagenic. PMID:27559394

  1. Aqueous Media Oxidation of Alcohols with Ammonium Persulfate

    Institute of Scientific and Technical Information of China (English)

    IMANZADEH, Gholam Hassan; ZAMANLOO, Mohammad R.; MANSOORI, Yaghoob; KHODAYARI, Ali


    Oxidation of series of various primary and secondary alcohols to corresponding carbonyl compounds with ammonium persulfate in aqueous media was described. No over oxidation of primary alcohols to carboxylic acids and secondary alcohols to esters was observed. Under such conditions benzoin was converted to benzoic acid.

  2. New synthetic method and properties of ammonium dinitramide (ADN)

    Energy Technology Data Exchange (ETDEWEB)

    Hatano, H.; Onda, T.; Shi Ino, K.; Kiname, S.I. [Technical Center, Hosoya Kako, Osawa (Japan); Miyazaki, S.; Suzuki, S. [Research et Development Center, Nissan Motor Co, Saitama (Japan)


    Ammonium dinitramide (ADN) is one of the energetic materials, its hazard, however, has never been presented yet. In this paper, new synthetic method of ADN and its properties are contained. It has been found out that ADN has little hazard and is a safe energetic compound. (authors) 4 refs.

  3. 75 FR 14082 - Ammonium Salts of Fatty Acids (C8 (United States)


    ... diet of humans, animals, and plants and currently have Food and Drug Administration and EPA approved.../kg/day (6 times the limit dose of 1,000 mg/kg/day) on days 2 to 13 of pregnancy and musculo-skeletal... plants. Ammonium salts of fatty acid are not likely to persist in the environment and are expected to...

  4. Increase of water resistance of ammonium nitrate explosives

    Directory of Open Access Journals (Sweden)

    Zulkhair Mansurov


    Full Text Available Developed a method of kapsulating of ammonium nitrate with liquid paraffin increase finding explosives in water for 60 minutes. Placing explosives in the plastic shell, the explosive was, as in standing or running water during the day. When conducting field tests failures were absent.

  5. Characterization of ammonium polyuranate powders from a continuous precipitator

    Energy Technology Data Exchange (ETDEWEB)

    Oolman, T.


    Ammonium polyuranate powders produced in a continuous, well-mixed precipitator were characterized by means of electron microscopy. The powders were qualitatively analyzed with the scanning electron microscope and the elementary crystallites were quantivatively analyzed with the transmission electron microscope. The results were fit to a kinetic theory of continuous precipitation. A phase analysis was also preformed by x-ray powder diffraction.

  6. Synthetic receptors for ammonium ions using dynamic combinatorial chemistry

    NARCIS (Netherlands)

    Hamieh, Saleh


    The general topic of this dissertation is the development of synthetic receptors for organic ammonium ions in near physiological conditions using disulfide dynamic combinatorial chemistry (DCC). Chapter 1 explains the importance of this development and the associated difficulties when using the conv

  7. Carboxylates and the uptake of ammonium by excised maize roots

    NARCIS (Netherlands)

    Breteler, H.


    The effect of carboxylates (organic acid anions) on NH 4 uptake was studied by changing the carboxylate level of roots prior to uptake experi ments. Succinate was the most effective stimulator of ammonium uptake. The oxocarboxylates (α-oxoglutarate, oxaloacetate and

  8. Treating leachate mixture with anaerobic ammonium oxidation technology

    Institute of Scientific and Technical Information of China (English)

    ZHANG Hong-guo; ZHOU Shao-qi


    Large amounts of ammonium and a low content of biodegradable chemical oxygen demand(COD) are contained in leachate from aged landfills, together with the effluent containing high concentration of nitric nitrogen after biochemical treatment.Treatment effect of anaerobic ammonium oxidation (anammox) process on the mixture of the leachate and its biochemical effluent was investigated. The results show that the average removal efficiencies of ammonium, nitric nitrogen and total nitrogen are 87.51%,74.95% and 79.59%, respectively, corresponding to the average ratio of removed nitric nitrogen to ammonium, i.e. 1.14 during the steady phase of anammox activity. The mean removal efficiency of COD is only 24.01% during the experimental period. The demand of total phosphorous for the anammox process is unobvious. Especially, the alkalinity and pH value of the effluent are close to those of the influent during the steady phase of anammox activity. In addition, it is demonstrated that the status of the anammox bioreactor can be indicated by the alkalinity and pH value during the course of the experiment. The anammox bioreactor has shown potential for nitrogen removal in the leachate mixture. However, COD and total phosphorous in the leachate mixture need further treatment for removal efficiencies of COD and total phosphorous are not good in the anammox bioreactor.

  9. Growth features of ammonium hydrogen -tartrate single crystals

    Indian Academy of Sciences (India)

    G Sajeevkumar; R Raveendran; B S Remadevi; Alexander Varghese Vaidyan


    Ammonium hydrogen -tartrate (-AHT) single crystals were grown in silica gel. The growth features of these crystals with variation of parameters like specific gravity of the gel, gel pH, acid concentrations, concentration of the feed solution and gel age were studied in detail.

  10. Global modeling of nitrate and ammonium aerosols using EQSAM3 (United States)

    Xu, L.; Penner, J. E.


    Atmospheric aerosols, particles suspending in air, are important as they affect human health, air quality, and visibility as well as climate. Sulfate, nitrate, ammonium, chloride and sodium are among the most important inorganic aerosol species in the atmosphere. These compounds are hygroscopic and absorb water under almost all ambient environmental conditions. The uptake of water alters the aerosol size, and causes water to become the constituent with the largest atmospheric aerosol mass, especially when the aerosols grow into fog, haze or clouds. Furthermore, several global model studies have demonstrated that rapid increases in nitrogen emissions could produce enough nitrate in aerosols to offset the expected decline in sulfate forcing by 2100 for the extreme IPCC A2 scenario (Bauer et al., 2007). Although nitrate and ammonium were identified as significant anthropogenic sources of aerosols by a number of modeling studies, most global aerosol models still exclude ammonium-nitrate when the direct aerosol forcing is studied. In this study, the computationally efficient equilibrium model, EQSAM3, is incorporated into the UMICH-IMPACT-nitrate model using the hybrid dynamical solution method (Feng and Penner, 2007). The partitioning of nitrate and ammonium along with the corresponding water uptake is evaluated by comparing the model to the EQUISOLVE II method used in Feng and Penner (2007). The model is also evaluated by comparison with the AERONET data base and satellite-based aerosol optical depths.

  11. Profiling the origin of ammonium nitrate: proof-of-principle

    NARCIS (Netherlands)

    Carol-Visser, J.; Farmache, M.A.; Heijden, A.E.D.M. van der


    In many Improvised Explosive Devices (IEDs) the main charge consists of ammonium nitrate (AN). For forensic reasons, screening for the origin of AN is of importance. By assessing specifi c characteristics, diff erent AN batches can be profi led, in this way providing extra information which could le

  12. Maximizing ammonium nitrogen removal from solution using different zeolites. (United States)

    Penn, Chad J; Warren, Jason G; Smith, Savannah


    Zeolite minerals are ideal for removing ammonium nitrogen (NH4(+)-N) from animal wastes, leachates, and industrial effluents. The objectives of this study were to compare NH4+ removal and kinetics among several commercially available zeolites under various conditions and determine if calorimetry could provide information regarding kinetics of NH4+ removal. Ammonium sorption onto potassium (K) saturated zeolites was compared using synthetic vs. natural swine effluent and with either traditional batch-shaken system or a "tea bag" approach in which zeolites were contained in a mesh sack and suspended in a solution of swine effluent. Ammonium sorption was measured at four retention times using a flow-through system, and the resulting heat response was measured using isothermal calorimetry. Ammonium removal was not significantly different in synthetic vs. natural swine effluent. Ammonium removal was lower in batch-stirred compared to batch-shaken systems, suggesting that diffusion between particles was rate-limiting in the former system. Flow-through cells possessing contact times > 100 s displayed greater NH4+ sorption than batch systems, suggesting that maintaining high NH4+ concentration in solution, removal of exchange products, and sufficient reaction time are critical to maximizing NH4+ removal by zeolites. Within 100 s after NH4+ addition, endothermic heat responses indicated that NH4(+)-K+ exchange had peaked; this was followed by significant heat rate reduction for 50 min. This confirmed findings of an initial fast NH4(+)-K+ exchange followed by a slower one and suggests the 100-s period of rapid reaction is an indicator of the minimum flow through retention time required to optimize NH4+ sorption to zeolites used in this study.

  13. Recycle use of magnesium ammonium phosphate to remove ammonium nitrogen from rare-earth wastewater. (United States)

    Huang, H M; Xiao, X M; Yan, B


    This paper presents a recycle MAP process (magnesium ammonium phosphate) to remove NH4-N from a typical rare-earth wastewater. The optimum conditions for the MAP precipitation and recycle use of the MAP with a newly-designed process were investigated in laboratory. The results showed that the pH value and dosages of P (phosphate) and Mg reagents have a significant influence on NH4-N removal, with a maximum removal efficiency of 99.4% at the conditions of pH=9 and Mg:N:P molar ratio=1.2:1:1.2. In the process of recycle use of the MAP, adding some HCl to dissolve MAP decomposition residues could effectively enhance NH4-N removal. The NH4-N removal efficiency reached 99.6% by adding an HCl amount of H+:OH- molar ratio=0.8 into the reused MAP decomposition residues, whereas the NH4-N removal efficiency without addition of HCl was only 96.4%. Moreover, the residual PO4-P from the end of reaction was recovered and the optimum recovery efficiency was achieved at a Mg:P molar ratio=6 and pH=10. Under these optimum conditions, the residual NH4-N and PO4-P concentrations in the treated wastewater, through 6 times of the recycling, were less than 15 mg/L and 1 mg/L, respectively. On the basis of this, an economic evaluation of the recycling MAP was made, and this recycle process could save 48.6% cost used in the chemicals for treating per cubic meter of the rare-earth wastewater, compared to the conventional MAP process.

  14. Analysis on test results of thiocyanate in domestic dairy products in Hunan province%湖南省市售国产乳制品中硫氰酸盐检测结果分析

    Institute of Scientific and Technical Information of China (English)

    卢超; 秦丹


    目的:掌握湖南省市售国产乳制品中硫氰酸盐含量,有效指导消费者科学消费。方法利用离子色谱法对湖南省388批次市售国产乳制品硫氰酸钠进行检测。结果388批次乳制品硫氰酸钠检出率为93.3%,折算为生乳后的含量均在国家食药监总局风险监测参考值10 mg/kg范围内。其中,307批次液体乳制品硫氰酸盐检出率为91.5%,按系数折算为生乳后含量在1.0~6.9 mg/kg之间的为86.98%;81批次奶粉检出率为100%,按系数折算为生乳后含量在0.1~5.9 mg/kg之间的为97.35%。结论经过分析原料乳中硫氰酸盐的可能来源,认为湖南省市售国产乳制品中硫氰酸盐主要来源于原料生鲜乳本底,非法添加的可能性较小,有必要立刻全面开展生乳中硫氰酸盐本底值调查,系统地为乳制品硫氰酸盐监测提供有效依据。%ABSTRACT:Objective To determine the content of thiocyanate in domestic dairy products marketed in Hunan and guide consumer consumption.Methods The thiocyanate in 388 domestic dairy products marketed in Hunan was determined by ion chromatography.Result The detection rate of 388 dairy products was 93.3%, thiocyanate content converted into raw milk was in the range of 10 mg/kg formulated by China Food and Drug Administration. Among them, the detection rate of 307 liquid milk products was 91.5%, content converted into raw milk between 1.0~6.9 mg/kg was 86.98%; the detection rate of 81 milk powder was 100%, content converted into raw milk between 0.1~5.9 mg/kg was 97.35%.Conclusion By analyzing the possible sources of thiocyanate in the raw milk, it is believed that thiocyanate in the domestic dairy products in Hunan province mainly come from the raw milk, and the potential of illegal addition is less likely, it is necessary to carry out comprehensive investigation of thiocyanate background in raw milk immediately and provide efficient reference for thiocyanate monitoring of dairy product.

  15. Solution-processed p-type copper(I) thiocyanate (CuSCN) for low-voltage flexible thin-film transistors and integrated inverter circuits (United States)

    Petti, Luisa; Pattanasattayavong, Pichaya; Lin, Yen-Hung; Münzenrieder, Niko; Cantarella, Giuseppe; Yaacobi-Gross, Nir; Yan, Feng; Tröster, Gerhard; Anthopoulos, Thomas D.


    We report on low operating voltage thin-film transistors (TFTs) and integrated inverters based on copper(I) thiocyanate (CuSCN) layers processed from solution at low temperature on free-standing plastic foils. As-fabricated coplanar bottom-gate and staggered top-gate TFTs exhibit hole-transporting characteristics with average mobility values of 0.0016 cm2 V-1 s-1 and 0.013 cm2 V-1 s-1, respectively, current on/off ratio in the range 102-104, and maximum operating voltages between -3.5 and -10 V, depending on the gate dielectric employed. The promising TFT characteristics enable fabrication of unipolar NOT gates on flexible free-standing plastic substrates with voltage gain of 3.4 at voltages as low as -3.5 V. Importantly, discrete CuSCN transistors and integrated logic inverters remain fully functional even when mechanically bent to a tensile radius of 4 mm, demonstrating the potential of the technology for flexible electronics.

  16. Glass transition dynamics and conductivity scaling in ionic deep eutectic solvents: The case of (acetamide + lithium nitrate/sodium thiocyanate) melts

    Energy Technology Data Exchange (ETDEWEB)

    Tripathy, Satya N., E-mail:; Wojnarowska, Zaneta; Knapik, Justyna; Paluch, Marian [Institute of Physics, University of Silesia, Uniwersytecka 4, 40-007 Katowice (Poland); Silesian Center for Education and Interdisciplinary Research, 75 Pulku Piechoty 1A, 41-500 Chorzow (Poland); Shirota, Hideaki [Department of Nanomaterial Science and Department of Chemistry, Chiba University, 1-33 Yayoi, Inage-ku, Chiba 263-8522 (Japan); Biswas, Ranjit [Department of Chemical, Biological and Macromolecular Sciences, S. N. Bose National Centre for Basic Sciences, JD Block, Sector III, Salt Lake, Kolkata 700098 (India)


    A detailed investigation on the molecular dynamics of ionic deep eutectic solvents (acetamide + lithium nitrate/sodium thiocyanate) is reported. The study was carried out employing dielectric relaxation spectroscopy covering seven decades in frequency (10{sup −1}-10{sup 6} Hz) and in a wide temperature range from 373 K down to 173 K, accessing the dynamic observables both in liquid and glassy state. The dielectric response of the ionic system has been presented in the dynamic window of modulus formalism to understand the conductivity relaxation and its possible connection to the origin of localized motion. Two secondary relaxation processes appear below glass transition temperature. Our findings provide suitable interpretation on the nature of secondary Johari-Goldstein process describing the ion translation and orientation of dipoles in a combined approach using Ngai’s coupling model. A nearly constant loss feature is witnessed at shorter times/lower temperatures. We also discuss the ac conductivity scaling behavior using Summerfield approach and random free energy barrier model which establish the time-temperature superposition principle. These experimental observations have fundamental importance on theoretical elucidation of the conductivity relaxation and glass transition phenomena in molten ionic conductors.

  17. Phase Behaviour of 1-Ethyl-3-methylimidazolium Thiocyanate Ionic Liquid with Catalytic Deactivated Compounds and Water at Several Temperatures: Experiments and Theoretical Predictions

    Directory of Open Access Journals (Sweden)

    Ramalingam Anantharaj


    Full Text Available Density, surface tension and refractive index were determined for the binary mixture of catalytic deactivated compounds with 1-ethyl-3-methylimidazolium thiocyanate {[EMIM][SCN]} at temperature of (298.15 to 323.15 K. For all the compounds with ILs, the densities varied linearly in the entire mole fraction with increasing temperature. From the obtained data, the excess molar volume and deviation of surface tension and refractive index have been calculated. A strong interaction was found between similar (cation-thiophene or cation-pyrrole compounds. The interaction of IL with dissimilar compounds such as indoline and quinoline and other multiple ring compounds was found to strongly depend on the composition of IL at any temperatures. For the mixtures, the surface tension decreases in the order of: thiophene > quinoline > pyridine > indoline > pyrrole > water. In general from the excess volume studies, the IL-sulphur/nitrogen mixture has stronger interaction as compared to IL-IL, thiophene-thiophene or pyrrole-pyrrole interaction. The deviation of surface tension was found to be inversely proportional to deviation of refractive index. The quantum chemical based COSMO-RS was used to predict the non-ideal liquid phase activity coefficient for all mixtures. It indicated an inverse relation between activity coefficient and excess molar volumes.

  18. Extractive spectrophotometric determination of sulphonamide drugs in pure and pharmaceutical preparations through ion-pair formation with molybdenum(V thiocyanate in acidic medium

    Directory of Open Access Journals (Sweden)

    Faten A. Nour El-Dien


    Full Text Available A simple and sensitive extraction-spectrophotometric method is described for the determination of sulfonamide drugs, namely sulphamethoxazole, sulphaguanidine, sulphaquinoxaline, sulphametrole and sulphadimidine, in both pure form and in the dosage forms available in Egyptian markets. The method is based on ion-pair formation between the sulphonamides and Mo(V-thiocyanate inorganic complex in a sulphuric acid medium followed by extraction of the coloured ion-pairs with 1,2-dichloroethane. The optimum conditions are established. The method permits the determination of sulphonamide drugs over the concentration range of 5–50 μg ml−1. The Sandell sensitivity (S, molar absorptivity, correlation coefficient and regression equations, and limits of detection (LOD and quantification (LOQ are calculated. The law values of standard deviation (0.09–0.38 and relative standard deviation (0.10–0.550 reflect the accuracy and precision of the proposed method. The method is applicable for the assay of the investigated drugs in different dosage forms and the results are in good agreement with those obtained by the official pharmacopeial method.

  19. Selective extraction by dissolvable (nitriloacetic acid-nickel)-layered double hydroxide coupled with reaction with potassium thiocyanate for sensitive detection of iron(III). (United States)

    Tang, Sheng; Chang, Yuepeng; Shen, Wei; Lee, Hian Kee


    A highly selective method has been proposed for the determination of iron cation (Fe(3+)). (Nitriloacetic acid-nickel)-layered double hydroxide ((NTA-Ni)-LDH) was successfully synthesized and used as dissolvable sorbent in dispersive solid-phase extraction to pre-concentrate and separate Fe(3+) from aqueous phase. Since Fe(3+) has a larger formation constant with NTA compared to Ni(2+), subsequently ion exchange occurred when (NTA-Ni)-LDH was added to the sample solution. The resultant (NTA-Fe)-LDH sol was isolated and transferred in an acidic medium containing potassium thiocyanate (KSCN). Since (NTA-Fe)-LDH could be dissolved in acidic conditions, Fe(3+)was released and reacted with SCN(-) to form an Fe-SCN complex. The resulting product was measured by ultraviolet-visible spectrometry for quantitative detection of Fe(3+). Extraction factors, including sample pH, reaction pH, extraction temperature, extraction time, reaction time and concentration of KSCN were optimized. This method achieved a low limit of detection of 15.2nM and a good linear range from 0.05 to 50μM (r(2)=0.9937). A nearly 18-fold enhancement of signal intensity was achieved after selective extraction. The optimized conditions were validated by applying the method to determine Fe(3+) in seawater samples.

  20. Thermal Thiocyanate Ligand Substitution Kinetics of the Solar Cell Dye N719 by Acetonitrile, 3-Methoxypropionitrile, and 4-tert-Butylpyridine

    DEFF Research Database (Denmark)

    Nguyen, Thai Hoang; Minh, Ha; Lund, Torben


    the same products as occur in the homogenous solutions; however, the reactions are approximately 10 times faster. For the reaction of a colloidal mixture of N719-dyed TiO2 particles in acetonitrile containing 0.5 M 4-TBP, a t1/2(het) of 120 h was calculated at 85°C. The N719-based DSSC cells...... in both homogenous solutions and colloidal mixtures of N719-dyed TiO2 nanocrystalline particles. Thiocyanate ligand substitution by the solvents (S) acetonitrile or 3-methoxypropionitrile in homogeneous solutions occurs at elevated temperatures (80-110°C) by means of a simple slow pseudo......-first-order reaction leading to the formation of the product [RuL2(NCS)(S)]+ with a half life time t1/2  ~ 2000 h of N719 at 80 ºC. If tert-butylpyridine (0.5 M) is added, the end product instead becomes [RuL2(NCS)(4-TBP)]+  with a t1/2 ~1000 h. When N719 is bound to TiO2 particles, the reactions with S and 4-TBP give...

  1. [Biochemical demonstration of HCO3--und Cl--dependent ATPase activities in the rectum of larval dragonflies and inhibition of rectal chloride uptake by thiocyanate (author's transl)]. (United States)

    Komnick, H; Schmitz, M; Hinssen, H


    Hydrogencarbonate and chloride activated, ouabain-insensitive ATPase activities are demonstrated in the salt-absorbing rectum of larval dragonflies. Maximal activation is achieved at approx. 30 mM HCO3- and 20 mM Cl-, respectively. The stimulation of each anion obeys Michaelis-Menten kinetics Km values are 4.65 mM for HCO3-- and 10.25 mM for Cl--activation. The activating anion of one type of ATPase simultaneously exerts an inhibitory effect on the other. Cl--activation is also reduced by Mg.ATP in concentrations above 0.5 mM and by Tris-Hepes buffer exceeding 2.5 mM. Both anion-dependent ATPase activities are found enriched in subcellular membraneous fractions of the rectum. Thiocyanate inhibits both activities and causes a significant decrease in rectal uptake of radioactive chloride from hypo-osmotic external solution. In the case of HCO3- dependent ATPase a competitive inhibition as SCN- was found with an inhibitor constant of Ki=0.5 mM.

  2. Solution-processed inorganic copper(I) thiocyanate (CuSCN) hole transporting layers for efficient p–i–n perovskite solar cells

    KAUST Repository

    Zhao, Kui


    CuSCN is a highly transparent, highly stable, low cost and easy to solution process HTL that is proposed as a low cost replacement to existing organic and inorganic metal oxide hole transporting materials. Here, we demonstrate hybrid organic-inorganic perovskite-based p-i-n planar heterojunction solar cells using a solution-processed copper(I) thiocyanate (CuSCN) bottom hole transporting layer (HTL). CuSCN, with its high workfunction, increases the open circuit voltage (Voc) by 0.23 V to 1.06 V as compared with devices based on the well-known poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) (0.83 V), resulting in a superior power conversion efficiency (PCE) of 10.8% without any notable hysteresis. Photoluminescence measurements suggest a similar efficiency of charge transfer at HTL/perovskite interface as PEDOT:PSS. However, we observe more efficient light harvesting in the presence of CuSCN at shorter wavelengths despite PEDOT:PSS being more transparent. Further investigation of the microstructure and morphology reveals differences in the crystallographic texture of the polycrystalline perovskite film, suggesting somewhat modified perovskite growth on the surface of CuSCN. The successful demonstration of the solution-processed inorganic HTL using simple and low temperature processing routes bodes well for the development of reliable and efficient flexible p-i-n perovskite modules or for integration as a front cell in hybrid tandem solar cells.

  3. Solution-processed p-type copper(I) thiocyanate (CuSCN) for low-voltage flexible thin-film transistors and integrated inverter circuits

    KAUST Repository

    Petti, Luisa


    We report on low operating voltage thin-film transistors (TFTs) and integrated inverters based on copper(I) thiocyanate (CuSCN) layers processed from solution at low temperature on free-standing plastic foils. As-fabricated coplanar bottom-gate and staggered top-gate TFTs exhibit hole-transporting characteristics with average mobility values of 0.0016 cm2 V−1 s−1 and 0.013 cm2 V−1 s−1, respectively, current on/off ratio in the range 102–104, and maximum operating voltages between −3.5 and −10 V, depending on the gate dielectric employed. The promising TFT characteristics enable fabrication of unipolar NOT gates on flexible free-standing plastic substrates with voltage gain of 3.4 at voltages as low as −3.5 V. Importantly, discrete CuSCN transistors and integrated logic inverters remain fully functional even when mechanically bent to a tensile radius of 4 mm, demonstrating the potential of the technology for flexible electronics.

  4. Electrochemical oxidation of quaternary ammonium electrolytes : Unexpected side reactions in organic electrochemistry

    NARCIS (Netherlands)

    Nouri Nigjeh, Eslam; de Vries, Marcel; Bruins, Andries P.; Bischoff, Rainer; Permentier, Hjalmar P.


    Quaternary ammonium salts are among the most widely used electrolytes in organic electrochemistry, but there is little known about their unwanted side oxidation reactions. We have, therefore, studied the constant potential oxidation products of quaternary ammonium electrolytes using mass spectrometr

  5. Antibacterial activity of reactive quaternary ammonium compounds in solution and in nonleachable coatings

    NARCIS (Netherlands)

    Gozzelino, G.; Romero Tobar, D.E.; Chaitiemwong, N.; Hazeleger, W.C.; Beumer, R.R.


    Antibacterial polymers suitable for coating applications without leaching of the biocidal component have been obtained by UV copolymerization of acrylic resins with acrylic monomers containing quaternary ammonium moieties. Suitable reactive biocides, based on quaternary ammonium monomers (QAMs), end

  6. 21 CFR 520.310 - Caramiphen ethanedisulfonate and ammonium chloride tablets. (United States)


    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Caramiphen ethanedisulfonate and ammonium chloride... § 520.310 Caramiphen ethanedisulfonate and ammonium chloride tablets. (a) Specifications. Each tablet contains 10 milligrams of 5st caramiphen ethanedisulfonate and 80 milligrams of ammonium chloride.1 1...

  7. 40 CFR 415.240 - Applicability; description of the ammonium chloride production subcategory. (United States)


    ... ammonium chloride production subcategory. 415.240 Section 415.240 Protection of Environment ENVIRONMENTAL... SOURCE CATEGORY Ammonium Chloride Production Subcategory § 415.240 Applicability; description of the ammonium chloride production subcategory. The provisions of this subpart are applicable to...

  8. 77 FR 21527 - Ammonium Nitrate From Russia: Correction to Notice of Opportunity To Request Administrative Review (United States)


    ... International Trade Administration Ammonium Nitrate From Russia: Correction to Notice of Opportunity To Request... of the antidumping duty orders and inadvertently omitted Ammonium Nitrate from Russia, POR 5/2/2011-3... include the Ammonium Nitrate from Russia administrative review in the referenced notice. Dated: April...

  9. 77 FR 32669 - Ammonium Nitrate from Ukraine Institution of a Five-Year Review (United States)


    ... COMMISSION Ammonium Nitrate from Ukraine Institution of a Five-Year Review AGENCY: United States... determine whether revocation of the antidumping duty order on ammonium nitrate from Ukraine would be likely... ammonium nitrate from Ukraine (66 FR 47451). Following the five-year reviews by Commerce and the...

  10. Anaerobic ammonium oxidation, denitrification and dissimilatory nitrate reduction to ammonium in the East China Sea sediment

    Directory of Open Access Journals (Sweden)

    G. D. Song


    Full Text Available Benthic nitrogen transformation pathways were investigated in the sediment of the East China Sea in June of 2010 using the 15N isotope pairing technique. Slurry incubations indicated that denitrification, anammox and dissimilatory nitrate reduction to ammonium (DNRA as well as nitrate release by nitrate storing organisms occurred in the East China Sea sediments. These four processes did not exist independently, the nitrate release therefore diluted the 15N labeling fraction of NO3−, a part of the 15NH4+ derived from DNRA also formed 30N2 via anammox. Therefore current methods of rate calculations led to over and underestimations of anammox and denitrification respectively. Following the procedure outlined in Thampdrup and Dalsgaard (2002, denitrification rates were slightly underestimated by on average 6% without regard to the effect of nitrate release, while this underestimation could be counteracted by the presence of DNRA. On the contrary, anammox rates calculated from 15NO3− experiment were significantly overestimated by 42% without considering nitrate release. In our study this overestimation could only be compensated 14% by taking DNRA into consideration. In a parallel experiment amended with 15NH4+ + 14NO3−, anammox rates were not significantly influenced by DNRA due to the high background of 15NH4+ addition. Excluding measurements in which bioirrigation was present, integrated denitrification rates decreased from 10 to 4 mmol N m−2 d−1 with water depth, while integrated anammox rates increased from 1.5 to 4.0 mmol N m−2 d−1. Consequently, the relative contribution of anammox to the total N-loss increased from 13% at the shallowest site near the Changjiang estuary to 50% at the deepest site on the outer shelf. This study represents the first time in which anammox has been demonstrated to play a significant role in benthic nitrogen cycling in the East China Sea sediment, especially on the outer shelf. N

  11. Sources et marché du sulfate d'ammonium Sources of and Market for Ammonium Sulfate

    Directory of Open Access Journals (Sweden)

    Loussouarn C.


    Full Text Available Engrais azoté le plus utilisé dans le monde jusqu'en 1970, le sulfate d'ammonium ne représente plus aujourd'hui que 4 % de la fertilisation azotée. Avec une teneur en azote de 21 % seulement, il a été peu à peu remplacé comme engrais universel par des produits plus concentrés, notamment l'urée et le nitrate d'ammonium. Obtenu pour plus de 40 % comme sous-produit dans la synthèse de monomères comme le caprolactame, l'acrylonitrile ou le méthacrylate de méthyle, et pour près de 10 % dans le traitement des gaz de cokerie, sa production dépend largement des développements du marché des fibres synthétiques, et, dans une moindre mesure, de la sidérurgie et de la métallurgie. Dans les pays développés, où la production est essentiellement fatale, le volume du marché est et sera plus fonction de la disponibilité du sulfate d'ammonium que de la demande ou de facteurs de marché; sa consommation ne résidera plus que dans des applications spécifiques pour lesquelles il sera bien adapté. Par contre, l'intérêt croissant pour compenser le déficit en soufre de certains sols, et les qualités agronomiques propres du sulfate d'ammonium laissent entrevoir la possibilité d'un essor de son utilisation dans certaines régions en voie de développernent. Ammonium sulfate was the most worldwide nitrogenous fertilizer used up to 1970. Today, it makes up only 4% of nitrogenous fertilization. With a nitrogen content of only 21%, it has gradually been replaced as a universal fertilizer by more concentrated products, particularly urea and ammonium nitrate. More than 40% of the ammonium sulfate is obtained as a by-product from the synthesis of monomers such as caprolactam, acrylonitrile or methyl methacrylate, and nearly 10% from coking gas processing. Its production depends extensively on the development of the market for synthetic fibers and, to a lesser extent, on the steel and metallurgical industries. In the industrialized countries

  12. Synthesis, antimicrobial activity of lamotrigine and its ammonium derivatives

    Indian Academy of Sciences (India)

    Yong Qian; Peng-Cheng Lv; Lei Shi; Rui-Qin Fang; Zhong-Cheng Song; Hai-Liang Zhu


    Antiepileptic drug lamotrigine and its thirteen ammonium salt complexes (4a-4m) were synthesized and characterized by IR, elemental analysis, 1H-NMR, and MS spectral methods. Many of the ammonium salts (4a-4m) were first reported. Furthermore, the crystal structure of compound 3 was determined by single crystal X-ray diffraction analysis. All these complexes were tested in vitro for their antibacterial activity (Bacillus subtilis, Staphylococcus aureus, Enterococus faecalis, Escherichia coli, Pseudomonas aeruginosa and Enterobacter cloacae). The results indicated that most of the complexes showed good antibacterial activity against Gram-positive (B. subtilis, S. aureus and S. faecalis), but showed mild, even inactive against Gram-negative bacterial strains.

  13. Thorium adsorption behaviour on mixed ammonium lanthanum oxalate, LAOX

    Energy Technology Data Exchange (ETDEWEB)

    Valentini Ganzerli, M.T.; Maggi, L.; Crespi Caramella, V


    The cation-exchange properties of mixed ammonium lanthanum oxalate, LAOX, were studied by batch equilibration as a function of the concentration of some cations, such as alkaline earths or ammonium and of some anions and acids. The distribution coefficients for thorium are high, while U(VI) is not adsorbed over a large acidity range. Thus, the separation of thorium from uranium may be successfully carried out. The experimental conditions of adsorption, elution and recovery of thorium were investigated as well, by using chromatographic columns filled with LAOX, in order to set best the separation conditions from uranyl ions. Instrumental neutron activation analysis, ICP emission spectrometry and the UV spectrometry were used to evaluate the thorium, uranium and lanthanum concentrations00.

  14. Thermal stability assessment of anti-explosive ammonium nitrate

    Institute of Scientific and Technical Information of China (English)

    Lijin Shen; Xuguang Wang


    The explosivity experiment of anti-explosive ammonium nitrate (AEAN) shows that the explosive characteristic of AEAN is eliminated. The adiabatic decompositions of ammonium nitrate and AEAN were investigated with an accelerating rate calorimeter (ARC). The curves of thermal decomposition temperature and pressure versus time, self-heating rate and pressure versus temperature for two systems were obtained. The kinetic parameters such as apparent activation energy and pre-exponential factor were calculated.The safety of AEAN was analyzed. It was indicated that AEAN has a higher thermal stability than AN. At the same time, it can be shown that the elimination of its explosive characteristic is due to the improvement on the thermal stability of AEAN.

  15. Anaerobic ammonium oxidation in a bioreactor treating slaughterhouse wastewater

    Directory of Open Access Journals (Sweden)

    V. Reginatto


    Full Text Available Ammonium oxidation was thought to be an exclusively aerobic process; however, as recently described in the literature, it is also possible under anaerobic conditions and this process was named ANAMMOX. This work describes the operation of a system consisting of a denitrifying reactor coupled to a nitrifying reactor used for removal of nitrogen from slaughterhouse wastewater. During operation of the denitrifying reactor an average nitrogen ammonium removal rate of 50 mg/Ld was observed. This biomass was used to seed a second reactor, operated in repeated fed batch mode, fed with synthetic medium specific to the growth of bacteria responsible for the ANAMMOX process. The nitrogen loading rate varied between 33 and 67 mgN/Ld and average nitrogen removal was 95% and 40%, respectively. Results of fluorescence in situ hybridization (FISH confirmed the presence of anammox-like microorganisms in the enriched biomass.

  16. Preparation of nanodispersed titania using stabilized ammonium nitrate melts

    KAUST Repository

    Raciulete, Monica


    An expedite one-step approach using simple precursors has been proposed to obtain metallic oxide compounds and exemplified by preparation of highly dispersed TiO2. The technique consists in heating to 400500 °C of molten ammonium nitrate stabilized with an organic nitrogen-containing compound (urea, melamine, ammonium oxalate) and containing dissolved metal salt precursor (TiOCl2). The crystallites of the resulting TiO2 demonstrated variable size and shape as a function of stabilizer used. Their activity in photocatalytic oxidation of formic acid also depends on the nature of the stabilizer. The catalysts as-prepared showed high photocatalytic performance, superior to that of the Degussa P25 reference. Nitrogen containing stabilizers play a double role of increasing the process safety and modifying the properties of the solid products. © 2010 Elsevier Inc. All rights reserved.

  17. The nitrogen Sternheimer antishielding factor in the ammonium ion (United States)

    Fowler, P. W.; Kelly, H. M.; Brown, R. J. C.


    Coupled Hartree-Fock calculations in various basis sets yield values in the range 6.7 to 6.8 for the Sternheimer antishielding factor (1 - γ ∞) of the nitrogen nucleus in the ammonium ion. These are in substantial agreement with the value of 9 that is obtained from a model of measured relaxation times in solid ammonium chloride when allowance is made for effects of the crystalline environment on the chloride ion Sternheimer antishielding factor. Other experimental estimates of the nitrogen Sternheimer factor are discussed. The new value is used to derive cation field gradients from measured quadrupole coupling constants in solid NH 4ReO 4 and NH 4IO 4.

  18. Ammonium sulphate precipitation overestimates titres of anti-peptide antisera. (United States)

    Roth, B; Barkas, T


    Precipitation by 50% final saturation of ammonium sulphate, a method commonly used to estimate titres and affinity constants of antibodies, was found consistently to overestimate the titre of anti-peptide antisera when compared with other antibody precipitants. The effect could not be attributed to non-IgG fractions, and similar overestimations were found when pure IgG was used. We suggest that the lower values represent a more physiologically relevant estimation.

  19. Recovering germanium from coal ash by chlorination with ammonium chloride

    Institute of Scientific and Technical Information of China (English)


    A new process of enriching germanium from coal ash was developed. The process involves in mixing the coal ash and ammonium chloride and then roasting the mixture to produce germanium chloride that is then absorbed by dilute hydrochloric acid and hydrolyzed to germanium oxide. The germanium recovery reached to 80.2% at the optimum condition: mass ratio of NH4Cl/coal ash is 0.15, roasting temperature 400℃ and roasting time 90 min.

  20. Ammonium photo-production by heterocytous cyanobacteria: potentials and constraints. (United States)

    Grizeau, Dominique; Bui, Lan Anh; Dupré, Catherine; Legrand, Jack


    Over the last decades, production of microalgae and cyanobacteria has been developed for several applications, including novel foods, cosmetic ingredients and more recently biofuel. The sustainability of these promising developments can be hindered by some constraints, such as water and nutrient footprints. This review surveys data on N2-fixing cyanobacteria for biomass production and ways to induce and improve the excretion of ammonium within cultures under aerobic conditions. The nitrogenase complex is oxygen sensitive. Nevertheless, nitrogen fixation occurs under oxic conditions due to cyanobacteria-specific characteristics. For instance, in some cyanobacteria, the vegetative cell differentiation in heterocyts provides a well-adapted anaerobic microenvironment for nitrogenase protection. Therefore, cell cultures of oxygenic cyanobacteria have been grown in laboratory and pilot photobioreactors (Dasgupta et al., 2010; Fontes et al., 1987; Moreno et al., 2003; Nayak & Das, 2013). Biomass production under diazotrophic conditions has been shown to be controlled by environmental factors such as light intensity, temperature, aeration rate, and inorganic carbon concentration, also, more specifically, by the concentration of dissolved oxygen in the culture medium. Currently, there is little information regarding the production of extracellular ammonium by heterocytous cyanobacteria. This review compares the available data on maximum ammonium concentrations and analyses the specific rate production in cultures grown as free or immobilized filamentous cyanobacteria. Extracellular production of ammonium could be coupled, as suggested by recent research on non-diazotrophic cyanobacteria, to that of other high value metabolites. There is little information available regarding the possibility for using diazotrophic cyanobacteria as cellular factories may be in regard of the constraints due to nitrogen fixation.

  1. Proton- and ammonium- sensing by histaminergic neurons controlling wakefulness.

    Directory of Open Access Journals (Sweden)

    Yvgenij eYanovsky


    Full Text Available Orexinergic and histaminergic neurons in the posterior hypothalamus are involved in the control of arousal. Extracellular levels of acid /CO2 are fundamental physicochemical signals controlling wakefulness and breathing. Acidification excites orexinergic neurons like the chemosensory neurons in the brain stem. Hypercapnia induces c-Fos expression, a marker for increased neuronal activity, in the rat histaminergic tuberomamillary nucleus (TMN, but the mechanisms of this excitation are unknown. Acid-sensing ion channels (ASICs are gated by protons and also by ammonium. Recordings in rat brain slices revealed now that acidification within the physiological range (pH from 7.3 to 7.0 as well as ammonium chloride (5mM excite histaminergic neurons. We detected variable combinations of 4 known types of ASICs in single TMN neurons, along with the pharmacological properties of pH-induced current. At pH 7.0 however, activation of ASICs in TMN neurons was negligible. Block of type I metabotropic glutamate receptors abolished proton- but not ammonium- induced excitation. Mouse TMN neurons were identified within a novel HDC-Cre transgenic reporter mouse line. In contrast to the rat these lacked pH 7.0-induced excitation and showed only a minimal response to the mGluR I agonist DHPG (0.5µM. Ammonium-induced excitation was similar in mouse and rat. Thus glutamate, which is released by glial cells and orexinergic axons amplifies CO2/acid-induced arousal through the recruitment of the histaminergic system in rat but not in mouse. These results are relevant for the understanding of neuronal mechanisms controlling H+/CO2-induced arousal in hepatic encephalopathy and obstructive sleep apnoea. The new HDC-Cre mouse model will be a useful tool for studying the physiological and pathophysiological roles of the histaminergic system.

  2. Nanomodified vermiculite NMV - a new material for recycling ammonium nitrogen (United States)

    Rama, Miradije; Laiho, Taina; Eklund, Olav; Lehto, Kirsi; Shebanov, Alex; Smått, Jan-Henrik


    Vermiculites ((Mg,Fe,Al)3(Al,Si)4O10(OH)24H2O) are naturally occurring minerals from hydromica group with a high cation exchange capacity and large surface area. Since vermiculite is a hydrated mineral, its structure can be changed with heat. In this study vermiculite samples were heated in an oven until the interlayer distance of them diminished from 14 Å to 11.7 Å. This method for improving vermiculites intake of ammonium ions by heating, is an invention made at the University of Turku. Nanomodified vermiculite (NMV) is able to absorb up to 4.7 wt% of ammonium. NMV can be used as an efficient filter and immobilizer of ammonium in different environments. NMV has been efficiently tested on waste water from a biogas plant, human urine, combustion experiments, industrial chimneys, excrements from farms etc. Ammonium doped vermiculite (ADV) is further developed for fertilizer use. Performed experiments have testified the usability of ADV as a fertilizer. At first step the NMV was processed with the reject water from a biogas plant, were it absorbed NH4+ into the lattice. At second, the ADV was used as nutrient source for garden plants. Geraniums and begonias were used as test plants of the work. Plant growth rate was evaluated based on plant weight. Results showed that significant increase of the growth of geraniums and of begonias were observed when comparing to those cultivations where plants have got normal fertilization. Moreover, ADV has been tested as a fertilizer in greenhouse experiments with spruces and pines. After five months, the weight of the plants that had grown in a substrate containing ADV was 10 times the weight of plants growing in the reference substrate.

  3. Structural basis for Mep2 ammonium transceptor activation by phosphorylation. (United States)

    van den Berg, Bert; Chembath, Anupama; Jefferies, Damien; Basle, Arnaud; Khalid, Syma; Rutherford, Julian C


    Mep2 proteins are fungal transceptors that play an important role as ammonium sensors in fungal development. Mep2 activity is tightly regulated by phosphorylation, but how this is achieved at the molecular level is not clear. Here we report X-ray crystal structures of the Mep2 orthologues from Saccharomyces cerevisiae and Candida albicans and show that under nitrogen-sufficient conditions the transporters are not phosphorylated and present in closed, inactive conformations. Relative to the open bacterial ammonium transporters, non-phosphorylated Mep2 exhibits shifts in cytoplasmic loops and the C-terminal region (CTR) to occlude the cytoplasmic exit of the channel and to interact with His2 of the twin-His motif. The phosphorylation site in the CTR is solvent accessible and located in a negatively charged pocket ∼30 Å away from the channel exit. The crystal structure of phosphorylation-mimicking Mep2 variants from C. albicans show large conformational changes in a conserved and functionally important region of the CTR. The results allow us to propose a model for regulation of eukaryotic ammonium transport by phosphorylation.

  4. Removal of chloridazon by natural and ammonium kerolite samples (United States)

    Socías-Viciana, M. M.; Tévar de Fez, J.; Ureña-Amate, M. D.; González-Pradas, E.; Fernández-Pérez, M.; Flores-Céspedes, F.


    The adsorption of chloridazon (5-amino-4-chloro-2-phenylpyridazin-3(2H)-one) on natural and ammonium kerolite samples from aqueous solution at 10, 25 and 40 °C has been studied by using batch experiments. The experimental data points were fitted to the Langmuir equation in order to calculate the adsorption capacities ( Xm) of the samples; two straight lines were obtained, which indicates that the adsorption process takes place in two different stages. Values for Xm1 (first stage) ranged from 1.1 × 10 -2 mol kg -1 for natural kerolite at 40 °C up to 5.1 × 10 -2 mol kg -1 for ammonium kerolite at 10 °C and the values for Xm2 (second stage) ranged from 9.1 × 10 -2 mol kg -1 for natural kerolite at 40 °C up to 14 × 10 -2 mol kg -1 for natural kerolite at 10 °C. The adsorption experiments showed on the one hand, that the ammonium kerolite is more effective than natural kerolite to adsorb chloridazon in the range of temperature studied and on the other hand, that the lower temperature, the more effective the adsorption of chloridazon on the adsorbents studied.

  5. Extraction Factor Of Pure Ammonium Paratungstate From Tungsten Scraps

    Directory of Open Access Journals (Sweden)

    Pee J.-H.


    Full Text Available Typical oxidation process of tungsten scraps was modified by the rotary kiln with oxygen burner to increase the oxidation rate of tungsten scraps. Also to accelerate the solubility of solid oxidized products, the hydrothermal reflux method was adapted. By heating tungsten scraps in rotary kiln with oxygen burner at around 900° for 2hrs, the scraps was oxidized completely. Then oxidized products (WO3 and CoWO4 was fully dissolved in the solution of NaOH by hydrothermal reflux method at 150° for 2hrs. The dissolution rate of oxidized products was increased with increasing the reaction temperature and concentration of NaOH. And then CaWO4 and H2WO4 could be generated from the aqueous sodium tungstate solution. Ammonium paratungstate (APT also could be produced from tungstic acid using by aqueous ammonium solution. The morphologies (cubic and plate types of APT was controlled by the stirring process of purified solution of ammonium paratungstate.

  6. Ammonium nitrogen in fetuses of urea-treated sheep. (United States)

    Yelverton, C C; Roller, M H; Swanson, R N


    Eight pregnant Southdown ewes were treated (by drench) with 12.5 ml of 3.3 M urea solution per kilogram of body weight, and ammonium nitrogen concentrations of blood and tissues of these ewes and their fetuses were measured and compared with those of control ewes (given water by drench) and their fetuses. Blood ammonium nitrogen (BAN) and tissue ammonium nitrogen (TAN) concentrations for liver, kidney, spleen, and muscle of ewes and fetuses were determined by an ion-exchange procedure. Samples of blood were collected before treatment, at 30, 90 and 150 minutes after treatment, and at death of the dam. The principal ewes had increasing BAN concentrations with time after drench, and their fetuses had significantly greater (P less than 0.01) BAN concentrations than fetuses from control ewes. All fetuses were alive after death of the dams and had lower TAN values than their dams. The differences in ammonia concentrations between ewes and fetuses were larger in the principal group than in the control group. Except for ewe muscle and fetal liver, all tissues of principals had significantly greater (P less than 0.01) TAN concentrations than those of controls. Muscle of principal ewes and hepatic tissues of their fetuses had greater (P less than 0.05) TAN concentrations than those of control ewes and their fetuses.

  7. Quaternary ammonium salt N-(dodecyloxycarboxymethyl)-N,N,N-trimethyl ammonium chloride induced alterations in Saccharomyces cerevisiae physiology

    Indian Academy of Sciences (India)



    We investigated the influence of the quaternary ammonium salt (QAS) called IM (N-(dodecyloxycarboxymethyl)-N,N,N-trimethyl ammonium chloride) on yeast cells of the parental strain and the IM-resistant mutant (EO25 IMR)growth. The phenotype of this mutant was pleiotropic. The IMR mutant exhibited resistance to ethanol, osmotic shockand oxidative stress, as well as increased sensitivity to UV. Moreover, it was noted that mutant EO25 appears to havean increased resistance to clotrimazole, ketoconazole, fluconazole, nystatin and cycloheximide. It also toleratedgrowth in the presence of crystal violet, DTT and metals (selenium, tin, arsenic). It was shown that the presence ofIM decreased ergosterol level in mutant plasma membrane and increased its unsaturation. These results indicatechanges in the cell lipid composition. Western blot analysis showed the induction of Pma1 level by IM. RT-PCRrevealed an increased PMA1 expression after IM treatment.

  8. Evidence for surface nucleation: efflorescence of ammonium sulfate and coated ammonium sulfate aerosol particles (United States)

    Ciobanu, V. Gabriela; Marcolli, Claudia; Krieger, Ulrich K.; Zuend, Andreas; Peter, Thomas


    Aerosol particles are ubiquitous in the atmosphere and can undergo different phase transitions, such as deliquescence and efflorescence. Using optical microscopy, we investigated the efflorescence of ammonium sulfate (AS) in supersaturated AS and 1:1 and 8:1 (by weight) poly(ethylene glycol)-400 (PEG-400)/AS particles, which were deposited as droplets with diameters in the 16 - 35 μm range on a hydrophobically coated slide. The PEG-400/AS particles that are exposed to decreasing relative humidity (RH) exhibit a liquid-liquid phase separation below 90 % RH with the PEG-400 phase surrounding the aqueous AS inner phase (Marcolli and Krieger, 2006; Ciobanu et al., 2009). Pure AS particles effloresced in the RH range from 36.3 to 43.7 % RH, in agreement with literature data (31 - 48 % RH). In contrast, 1:1 PEG-400/AS particles with diameters of the AS phase from 7.2 - 19.2 μm effloresced between 26.8 - 33.9 % RH and 8:1 PEG-400/AS particles with diameters of the AS phase from 1.8 - 7.3 μm between 24.3 - 29.3 % RH. Such low efflorescence relative humidity (ERH) values have never been reached before for AS particles of this size range. We show that neither a potential inhibition of water evaporation via anomalously slow diffusion through the PEG coating, nor the presence of low amounts of PEG-400 in the AS phase, nor different timescales between various experimental techniques could possibly explain the low AS ERH values of PEG-400/AS particles in our setup. High-speed photography of the efflorescence process allowed to monitor the proceeding of the AS crystallization fronts within the particles with millisecond time resolution. The nucleation locations were deduced based on the initial crystals growth locations. Statistical analysis of 31 and 19 efflorescence events for pure AS and 1:1 PEG-400/AS particles, respectively, identified the air/droplet/substrate contact line and the air/droplet interface as preferred nucleation locations in the case of pure AS particles

  9. Estimation and correlation of salivary thiocyanate levels in healthy and different forms of tobacco users having chronic periodontitis: A cross-sectional biochemical study

    Directory of Open Access Journals (Sweden)

    C Veena Kalburgi


    Full Text Available Background: Periodontitis is a common inflammatory disease with complex and multi-factorial origin. Tobacco usage has shown its adverse effect on periodontal health. Various components within saliva not only protect the integrity of oral tissues, but also provide clues to local and systemic diseases and conditions. Salivary thiocyanate (SCN has been shown to be a chemical indicator in smokers and smokeless tobacco users. Noninvasive nature of salivary testing has made it an attractive and effective alternative to blood and urine testing. Limited studies are there comparing and correlating the salivary SCN levels in smokers with chronic periodontitis (CP. However, no studies show correlation of salivary SCN among gutka chewers with CP. Aims and Objectives: The objective of the following study is to estimate, compare, and correlate the SCN levels in periodontally healthy, CP, smokers with CP and gutka chewers with CP subjects. Materials and Methods: Study includes 120 subjects with age 18-55 years, categorized as periodonally healthy (n = 30, CP (n = 30, smokers (n = 30, and gutka chewers (n = 30 with CP. Required clinical parameters such as gingival index, probing depth and clinical attachment loss were recorded and salivary SCN levels were estimated through ultraviolet-spectrophotometer. Results: Mean salivary SCN level were shown to be higher among smokers and gutka chewers with CP as compared to healthy and CP alone. Conclusion: The present study exhibited the significant increase in salivary SCN levels among smokers and gutka chewers when compared to others, concluding that the analysis of salivary SCN levels could be used as an adjunctive means of diagnosis.

  10. Effect of thiocyanate counterion condensation on poly(allylamine hydrochloride) chains on the buildup and permeability of polystyrenesulfonate/polyallylamine polyelectrolyte multilayers. (United States)

    Ball, Vincent; Voegel, Jean-Claude; Schaaf, Pierre


    In this study, we investigate the buildup of PEI-(PSS-PAH)(n) polyelectrolyte multilayers at pH 7.4 in the presence of either NaCl or NaSCN as a supporting electrolyte. It appears that in the presence of increasing thiocyanate concentrations (from 0.1 to 0.5 M), the thickness increment, obtained from optical waveguide lightmode spectroscopy experiments, increases whereas it stays practically constant for increasing sodium chloride concentrations (between 0.1 and 0.5 M). The hydration of the films differs also markedly between both electrolyte solutions. The differences in the construction of the polyelectrolyte multilayers in the presence of both supporting electrolytes are rationalized in terms of strong SCN(-) condensation on the PAH chains. The occurrence of this ion condensation is indirectly demonstrated by means of zeta potential measurements and directly demonstrated by means of attenuated total internal reflection infrared spectroscopy on the multilayer films. Moreover when the films are built up in the presence of SCN(-), these ions are only slowly exchanged by the Cl(-) ions introduced in the bulk. Conversely the thick films obtained from 0.5 M NaSCN solutions do not deswell when the buffer solution is replaced by a 0.5 M NaCl containing buffer. The permeability of the films constructed in the presence of both sodium salts is also studied by means of cyclic voltametry and is found to be markedly different in the case of films made from five bilayers at 0.5 M salt concentration. This difference is due to the different morphology and porosity of the films constructed in the presence of 0.5 M NaCl and 0.5 M NaSCN.

  11. IC Determination of Thiocyanate in Liquid Dairy Products%离子色谱法测定液体乳制品中硫氰酸盐

    Institute of Scientific and Technical Information of China (English)

    张宝; 刘晓玲; 李东刚; 孙长华


    提出了离子色谱法测定液体乳中硫氰酸盐的方法.鲜奶或酸奶样品经乙腈提取和C18固相萃取柱净化后,再经Ion Pac AG11-HG保护柱及Dionex ICS-3000分离柱分离,由70 mmol·L-1氢氧化钾溶液洗脱,利用电导检测器检测.硫氰酸盐的质量浓度在0.20~10.0 mg·L-1范围内呈线性,方法的检出限(3S/N)为0.08 mg·L-1.方法用于鲜奶和酸奶样品分析,回收率在92.5%~104.5%之间,相对标准偏差(n=6)小于4.5%.%Ion chromatography was applied to the determination of thiocyanate in liquid dairy product.The samples of fresh milk or sour milk were extracted with acetonitrile and purified on C18 SPE column.The protective column (Ion Pac AGll-HG) and separation column (Dionex ICS-3000) were used for separation, with 70 mmol·L-1 KOH solution as mobile phase, and conductivity detector was used in the determination.Linearity range was found between 0.20-10.0 mg·L-1, and detection limit (3S/N) was found to be 0.08 mg· L-1.The proposed method was applied to the analysis of fresh milk and sour milk, giving values of recovery in the range of 92.5%-104.5% with RSD's (n=6)less than 4.5%.

  12. Structural evidence of substrate specificity in mammalian peroxidases: structure of the thiocyanate complex with lactoperoxidase and its interactions at 2.4 A resolution. (United States)

    Sheikh, Ishfaq Ahmed; Singh, Amit Kumar; Singh, Nagendra; Sinha, Mau; Singh, S Baskar; Bhushan, Asha; Kaur, Punit; Srinivasan, Alagiri; Sharma, Sujata; Singh, Tej P


    The crystal structure of the complex of lactoperoxidase (LPO) with its physiological substrate thiocyanate (SCN(-)) has been determined at 2.4A resolution. It revealed that the SCN(-) ion is bound to LPO in the distal heme cavity. The observed orientation of the SCN(-) ion shows that the sulfur atom is closer to the heme iron than the nitrogen atom. The nitrogen atom of SCN(-) forms a hydrogen bond with a water (Wat) molecule at position 6'. This water molecule is stabilized by two hydrogen bonds with Gln(423) N(epsilon2) and Phe(422) oxygen. In contrast, the placement of the SCN(-) ion in the structure of myeloperoxidase (MPO) occurs with an opposite orientation, in which the nitrogen atom is closer to the heme iron than the sulfur atom. The site corresponding to the positions of Gln(423), Phe(422) oxygen, and Wat(6)' in LPO is occupied primarily by the side chain of Phe(407) in MPO due to an entirely different conformation of the loop corresponding to the segment Arg(418)-Phe(431) of LPO. This arrangement in MPO does not favor a similar orientation of the SCN(-) ion. The orientation of the catalytic product OSCN(-) as reported in the structure of LPO.OSCN(-) is similar to the orientation of SCN(-) in the structure of LPO.SCN(-). Similarly, in the structure of LPO.SCN(-).CN(-), in which CN(-) binds at Wat(1), the position and orientation of the SCN(-) ion are also identical to that observed in the structure of LPO.SCN.

  13. Syntheses and Crystal Structures of Two Two-dimensional Coordination Polymers with 2,3-Dimethylpyrazine-1,4-dioxide and Thiocyanate as Mixed Bridge Ligands

    Institute of Scientific and Technical Information of China (English)

    SHI Jing-Min; LI Wei-Nan; ZHANG Feng-Xia; ZHANG Xia; LIU Lian-Dong


    Two two-dimensional coordination polymers,[Cd(μ1,3-SCN-)2(μ1,6-L)]n 1 and [Co(μ1,3-SCN-)2(μ1,6-L)]n 2,have been synthesized with 2,3-dimethylpyrazine-1,4-dioxide (L) and thiocyanate as mixed bridging ligands,and their crystal structures were determined by X-ray crystallography.Both crystals belong to monoclinic system,space group C2/c.The other crystal parameters are as follows:for complex 1:a = 9.732(3),b = 14.658(5),c = 8.811(3) (A),β =102.935(4)°,Z = 4,V = 1225.1(7)(A)3,CsHsCdN4O2S2,Mr = 368.71,Dc.-- 1.999 g/cm3,F(000) =720 andμ = 2.117 mm-1;for complex 2:a = 9.528(7),b = 14.563(11),c = 8.415(6) (A),β =102.195(9)°,V= 1141.3(14) (A)3,Z = 4,C8H8CoN4O2S2,Mr = 315.23,Dc = 1.835 g/cm3,F(000) =636 andμ = 1.863 mm-1.The two complexes show similar two-dimensional sheet structures.Along the c axis one-dimensional chains are constructed by the coordination of Cd(Ⅱ) (or Co(Ⅱ))ions with μ1,6-L bridging ligand,and the μ1,3-SCN- bridging ligands make the chains connect to each other,resulting in the formation of a two-dimensional sheet on the ac plane.

  14. Influence of heterogeneous ammonium availability on bacterial community structure and the expression of nitrogen fixation and ammonium transporter genes during in situ bioremediation of uranium-contaminated groundwater

    Energy Technology Data Exchange (ETDEWEB)

    Mouser, P.J.; N' Guessan, A.L.; Elifantz, H.; Holmes, D.E.; Williams, K.H.; Wilkins, M.J.; Long, P.E.; Lovley, D.R.


    The impact of ammonium availability on microbial community structure and the physiological status and activity of Geobacter species during in situ bioremediation of uranium-contaminated groundwater was evaluated. Ammonium concentrations varied by as much as two orders of magnitude (<4 to 400 {micro}M) across the study site. Analysis of 16S rRNA gene sequences suggested that ammonium influenced the composition of the microbial community prior to acetate addition with Rhodoferax species predominating over Geobacter species at the site with the highest ammonium, and Dechloromonas species dominating at sites with lowest ammonium. However, once acetate was added, and dissimilatory metal reduction was stimulated, Geobacter species became the predominant organisms at all locations. Rates of U(VI) reduction appeared to be more related to the concentration of acetate that was delivered to each location rather than the amount of ammonium available in the groundwater. In situ mRNA transcript abundance of the nitrogen fixation gene, nifD, and the ammonium importer gene, amtB, in Geobacter species indicated that ammonium was the primary source of nitrogen during in situ uranium reduction, and that the abundance of amtB transcripts was inversely correlated to ammonium levels across all sites examined. These results suggest that nifD and amtB expression by subsurface Geobacter species are closely regulated in response to ammonium availability to ensure an adequate supply of nitrogen while conserving cell resources. Thus, quantifying nifD and amtB expression appears to be a useful approach for monitoring the nitrogen-related physiological status of Geobacter species in subsurface environments during bioremediation. This study also emphasizes the need for more detailed analysis of geochemical/physiological interactions at the field scale, in order to adequately model subsurface microbial processes.


    Directory of Open Access Journals (Sweden)

    Nahidh Kaseer


    Full Text Available 31Overall crystal growth kinetics for ammonium perchlorate in laboratory scale batch  agitated vessel crystallizer have been determined from batch experiments performed in an integral mode. The effects of temperature between 30-60ºC, seed size 0.07, 0.120 and 0.275 mm and stirrer speed 160, 340, and 480 rpm, on the kinetics of crystal growth were investigated. Two different methods, viz. polynomial fitting and initial derivative were used to predict the kinetics expression. In general both methods gave comparable results for growth kinetics estimation. The order of growth process is not more than two. The activation energy for crystal growth of ammonium perchlorate was determined and found  to be equal to 5.8 kJ/ mole.            Finally, the influence of the affecting parameters on the crystal growth rate gives general expression that had an obvious dependence of the growth rate on each variables of concern (temperature, seed size, and stirrer speed .The general overall growth rate expression had shown that super saturation is the most significant variable. While the positive dependence of the stirrer speed demonstrates the importance of the diffusional step in the growth rate model. Moreover, the positive dependence of the seed size demonstrate the importance of the surface integration  step in the growth rate model. All the studied variables tend to suggest that the growth rate characteristics  of ammonium perchlorate from aqueous solution commenced in a batch crystallizer are diffusion kinetic controlled process.

  16. The Properties of Ammonium Dinitramine (ADN): Part 2: Melt Casting (United States)

    Hahma, A.; Edvinsson, H.; Östmark, H.


    A melt casting technique for ammonium dinitramine (ADN) and ADN/aluminum was developed. ADN proved relatively easy to cast, when 1% of magnesium oxide was used as a stabilizer and crystallization kernels. Densities of ADN/MgO 99/1 were 92 to 97% of theoretical mean density (TMD) and those of ADN/Al/MgO 64/35/1 were between 95 and 99% of TMD. Sedimentation of Al in the melt was prevented and the particle wetting was ensured by selecting a suitable particle size for Al. No gelling agents or other additives were used. The casting process and factors influencing it are discussed.

  17. Surge ammonium uptake in macroalgae from a coral atoll

    Digital Repository Service at National Institute of Oceanography (India)

    Raikar, V.; Wafar, M.V.M.

    Maintenance of high levels of biological productivity (up to several gC m-2 d-1) (Crossland et al., 1991) by coral atolls in oligotrophic oceanic waters with low ambient concentrations of N nutrients (typically of the order of few hundreds of nmols..., fish shoals migrating onto the reef could raise ambient ammonium concentrations in the vicinity of corals up to 0.9 ? M (Meyer et al., 1983) and area-specific N regeneration by actively feeding holothurians (Uthicke and Klumpp, 1998) could be in a...

  18. Further laboratory and theoretical investigations of ammonium dinitramide

    Energy Technology Data Exchange (ETDEWEB)

    Tulis, A.J.; Snelson, A. [IIT Research Institut, Chicago (United States); Heberlein, C.; Patel, D.L. [U.S. Army Cecom RD et E Center, NVESD (United States)


    Hydrogen and deuterated ammonium dinitramide have been vaporized under high vacuum and the IR matrix isolation spectra of the decomposition products obtained. Tentative vibration assignments have been made for HN(NO{sub 2}){sub 2} and DN(NO{sub 2}){sub 2} assuming a symmetrical non-planar structure in which the H or D is bonded to the central nitrogen atom. Other structures are also possible. Ab initio calculations have been made for the various structural isomers of hydrogen dinitramide. Vibration frequencies calculated for the hydrogenated and deuterated species are compared with the experimental values with the object of identifying the molecules` structure. (authors) 3 refs.

  19. Experimental study of the detonation of technical grade ammonium nitrate (United States)

    Presles, Henri-Noël; Vidal, Pierre; Khasainov, Boris


    The detonation of technical grade ammonium nitrate at the density ρ=0.666 g/cm confined in PVC and steel tubes was experimentally studied. The results show that the detonation is self-sustained and steady in steel tubes with diameter as small as 12 mm. Critical detonation diameter lies between 8 and 12 mm in 2 mm thick steel tubes and between 55 and 81 mm in PVC tubes. These values testify a strong detonation sensitivity of this product. To cite this article: H.-N. Presles et al., C. R. Mecanique 337 (2009).

  20. Ammonium diamminesilver(I bis(5-chloro-2-hydroxybenzenesulfonate trihydrate

    Directory of Open Access Journals (Sweden)

    Zhao-Peng Deng


    Full Text Available The reaction of silver nitrate with 5-chloro-2-hydroxybenzenesulfonic acid in the presence of ammonia yielded the title salt, (NH4[Ag(NH32](C6H4ClO4S2·3H2O. The AgI ion shows linear coordination [N—Ag—N = 175.2 (1 °]. The ammonium and diamminesilver cations, the benzenesulfonate anion and the lattice water molecules interact through an intricate network of N—H...O and O—H...O hydrogen bonds to form a three-dimensional network.

  1. Biological removal of selenate and ammonium by activated sludge in a sequencing batch reactor. (United States)

    Mal, J; Nancharaiah, Y V; van Hullebusch, E D; Lens, P N L


    Wastewaters contaminated by both selenium and ammonium need to be treated prior to discharge into natural water bodies, but there are no studies on the simultaneous removal of selenium and ammonium. A sequencing batch reactor (SBR) was inoculated with activated sludge and operated for 90days. The highest ammonium removal efficiency achieved was 98%, while the total nitrogen removal was 75%. Nearly a complete chemical oxygen demand removal efficiency was attained after 16days of operation, whereas complete selenate removal was achieved only after 66days. The highest total Se removal efficiency was 97%. Batch experiments showed that the total Se in the aqueous phase decreased by 21% with increasing initial ammonium concentration from 50 to 100mgL(-1). This study showed that SBR can remove both selenate and ammonium via, respectively, bioreduction and partial nitrification-denitrification and thus offer possibilities for treating selenium and ammonium contaminated effluents.

  2. Relations of ammonium minerals at several hydrothermal systems in the western U.S. (United States)

    Krohn, M. Dennis; Kendall, Carol; Evans, John R.; Fries, Terry L.


    Ammonium bound to silicate and sulfate minerals has recently been located at several major hydrothermal systems in the western U.S. utilizing newly-discovered near-infrared spectral properties. Knowledge of the origin and mineralogic relations of ammonium minerals at known hydrothermal systems is critical for the proper interpretation of remote sensing data and for testing of possible links to mineralization. Submicroscopic analysis of ammonium minerals from two mercury- and gold-bearing hot-springs deposits at Ivanhoe, Nevada and McLaughlin, California shows that the ammonium feldspar, buddingtonite, occurs as fine-grained euhedral crystals coating larger sulfide and quartz crystals. Ammonium feldspar seems to precipitate relatively late in the crystallization sequence and shows evidence for replacement of NH 4 + by K + or other monovalent cations. Some buddingtonite is observed in close association with mercury, but not with gold. Ammonioalunite is found in a variety of isolated crystal forms at both deposits. Nitrogen isotopic values for ammonium-bearing minerals show a 14‰ range in composition, precluding assignment of a specific provenance to the nitrogen. The correlations of nitrogen isotopic values with depth and ammonium content suggest some loss of nitrogen in the oxidizing supergene environment, possibly as a metastable mineral. The high ammonium content in these hydrothermal systems, the close association to mercury, and the small crystal size of the ammonium-bearing minerals all suggest that ammonium may be transported in a late-stage vapor phase or as an organic volatile. Such a process could lead to the formation of a non-carbonaceous organic aureole above a buried geothermal source. The discovery of a 10-km outcrop of ammonium minerals confirms that significant substitution of ammonium in minerals is possible over an extensive area and that remote sensing is a feasible means to detect such aureoles.

  3. Effects of Calcium Lignosulfonate and Silicic Acid on Ammonium Nitrate Degradation

    Directory of Open Access Journals (Sweden)

    Ahmet Ozan Gezerman


    Full Text Available Ammonium nitrate salts are the most commonly used nitrogenous fertilizers in industry. However, storage of ammonium nitrate is problematic, since its initial properties can decline because of environmental factors, leading to large economic losses. In this study, in order to prevent the caking and degradation of ammonium nitrate, an alternative composition with additional calcium lignosulfonate and silicic acid was studied. The resulting fertilizer was analyzed by screening analysis, ion chromatography, and electron microscopy methods.

  4. Shock Initiation and Equation of State of Ammonium Nitrate (United States)

    Robbins, David; Sheffield, Steve; Dattelbaum, Dana; Chellappa, Raja; Velisavljevic, Nenad


    Ammonium nitrate (AN) is a widely used fertilizer and mining explosive commonly found in ammonium nitrate-fuel oil. Neat AN is a non-ideal explosive with measured detonation velocities approaching 4 km/s. Previously, we reported a thermodynamically-complete equation of state for AN based on its maximum density, and showed that near-full density AN did not initiate when subjected to shock input conditions up to 22 GPa. In this work, we extend these initial results, by presenting new Hugoniot data for intermediate density neat AN obtained from gas gun-driven plate impact experiments. AN at densities from 1.8 to 1.5 g/cm3 were impacted into LiF windows using a two-stage light gas gun. Dual VISARs were used to measure the interfacial particle velocity wave profile as a function of time following impact. The new Hugoniot data, in addition to updates to thermodynamic parameters derived from structural analysis and vibrational spectroscopy measurements in high pressure diamond anvil cell experiments, are used to refine the unreacted EOS for AN. Furthermore, shock initiation of neat AN was observed as the initial porosity increased (density decreased). Insights into the relationship(s) between initial density and shock initiation sensitivity are also presented, from evidence of shock initiation in the particle velocity profiles obtained for the lower density AN samples.

  5. Removal of vanadium from ammonium molybdate solution by ion exchange

    Institute of Scientific and Technical Information of China (English)

    LI Qing-gang; ZHANG Qi-xiu; ZENG Li; XIAO Lian-sheng; YANG Ya-nan


    The separation techniques of vanadium and molybdenum were summarized, and a new method of removal V(Ⅴ) from Mo(Ⅵ) by adsorption with chelate resin was presented. Nine kinds of chelate resins were used to investigate the adsorbent capability of V(Ⅴ) in ammonium molybdate solution with static method. The test results show that DDAS, CUW and CW-2 resins can easily adsorb V(Ⅴ) in ammonium molybdate solution, but hardly adsorb Mo(Ⅵ). The dynamic experimental results show more than 99.5% of V(Ⅴ) can be adsorbed, and the adsorption rate of Mo(Ⅵ) is less than 0.27% at 294-296 K for 60 min at pH 7.42-8.02. The mass ratio of V to Mo decreases to l/5 0000 in the effluent from 1/255 in the initial solution. The loaded resin can be desorbed by 5% NH3·H2O solution, and the vanadium desorption rate can reach 99.6%. The max concentration of vanadium in desorbed solution can reach 20 g/L, while the concentration of molybdenum is less than 0.8 g/L.

  6. Regulation by ammonium of glutamate dehydrogenase (NADP+) from Saccharomyces cerevisiae. (United States)

    Bogonez, E; Satrústegui, J; Machado, A


    The activity of glutamate dehydrogenase (NADP+) (EC; NADP-GDH) of Saccharomyces cerevisiae is decreased under conditions in which intracellular ammonia concentrations increases. A high internal ammonia concentration can be obtained (a) by increasing the ammonium sulphate concentration in the culture medium, and (b) by growing the yeast either in acetate + ammonia media, where the pH of the medium rises during growth, or in heavily buffered glucose + ammonia media at pH 7.5. Under these conditions cellular oxoglutarate concentrations do not vary and changes in NADP-GDH activity appear to provide a constant rate of oxoglutarate utilization. The following results suggest that the decrease in NADP-GDH activity in ammonia-accumulating yeast cells is brought about by repression of synthesis: (i) after a shift to high ammonium sulphate concentrations, the number of units of activity per cell decreased as the inverse of cell doubling; and (ii) the rate of degradation of labelled NADP-GDH was essentially the same in ammonia-accumulating yeast cells and in controls, whereas the synthesis constant was much lower in the ammonia-accumulating cells than in the controls.

  7. Fabrication and cytocompatibility of spherical magnesium ammonium phosphate granules. (United States)

    Christel, Theresa; Geffers, Martha; Klammert, Uwe; Nies, Berthold; Höß, Andreas; Groll, Jürgen; Kübler, Alexander C; Gbureck, Uwe


    Magnesium phosphate compounds, as for example struvite (MgNH4PO4·6H2O), have comparable characteristics to calcium phosphate bone substitutes, but degrade faster under physiological conditions. In the present work, we used a struvite forming calcium doped magnesium phosphate cement with the formulation Ca0.75Mg2.25(PO4)2 and an ammonium phosphate containing aqueous solution to produce round-shaped granules. For the fabrication of spherical granules, the cement paste was dispersed in a lipophilic liquid and stabilized by surfactants. The granules were characterized with respect to morphology, size distribution, phase composition, compressive strength, biocompatibility and solubility. In general, it was seen that small granules can hardly be produced by means of emulsification, when the raw material is a hydraulic paste, because long setting times promote coalescence of initially small unhardened cement droplets. Here, this problem was solved by using an aqueous solution containing both the secondary (NH4)2HPO4 and primary ammonium phosphates NH4H2PO4 to accelerate the setting reaction. This resulted in granules with 97 wt.% having a size in the range between 200 and 1,000 μm. The novel solution composition doubled the compressive strength of the cement to 37 ± 5 MPa without affecting either the conversion to struvite or the cytocompatibility using human fetal osteoblasts.

  8. Development of electrochemical denitrification from waste water containing ammonium nitrate

    Energy Technology Data Exchange (ETDEWEB)

    Sawa, Toshio; Hirose, Yasuo; Ishii, Yoshinori; Takatsudo, Atsushi; Wakasugi, Kazuhico; Hayashi, Hiroshi


    The authors developed processes to dentrify waste water containing ammonium nitrate discharged from the nuclear fuel manufacturing works and to recover nitric acid and ammonia. For denitrification they applied the operating method and the conditions of operation to make 0.4mM or less from NH{sub 4}NO{sub 3} waste water of 1.5 M by 3 stages of electrodialysis cells. To recover nitric acid and ammonium water, they separated HNO{sub 3} solution of 6 M and NH{sub 4}OH solution with one unit of electrolysis cell, then absorbed NH{sub 3} gas from NH{sub 4}OH solution with water and applied the condition of operation to recover 8 M NH{sub 4}OH solution. The authors demonstrated that treatment and recovery can be carried out stably with actual waste water with a system through the combination of previously mentioned electrodialysis cells, electrolysis cells and an ammonia gas absorber. At present they are planning a plant where NH{sub 4}NO{sub 3} waste water of 4,500 mol can be treated per day.

  9. Studies on Biquaternary Ammonium Salt Algaecide for Removing Red Tide Algae

    Institute of Scientific and Technical Information of China (English)

    刘洁生; 张珩; 杨维东; 高洁; 柯琼


    The paper deals with the removal and control of red tide algae, Phaeoecystis globosa and Alexandrium tamarense by biquaternary ammonium salt algaecide. The results show that the efficient concentration of biquaternary ammonium salt to control the two algaes in 96 h is 0.8 mg · L-1 and 0.4 mg · L-1, respectively. It is found that biquaternary ammonium salt has high efficiency and longer duration of action in the removal and control of algae.Biquaternary ammonium salt might be an excellent algaecide to control HAB.

  10. Highly efficient hydrogen storage system based on ammonium bicarbonate/formate redox equilibrium over palladium nanocatalysts. (United States)

    Su, Ji; Yang, Lisha; Lu, Mi; Lin, Hongfei


    A highly efficient, reversible hydrogen storage-evolution process has been developed based on the ammonium bicarbonate/formate redox equilibrium over the same carbon-supported palladium nanocatalyst. This heterogeneously catalyzed hydrogen storage system is comparable to the counterpart homogeneous systems and has shown fast reaction kinetics of both the hydrogenation of ammonium bicarbonate and the dehydrogenation of ammonium formate under mild operating conditions. By adjusting temperature and pressure, the extent of hydrogen storage and evolution can be well controlled in the same catalytic system. Moreover, the hydrogen storage system based on aqueous-phase ammonium formate is advantageous owing to its high volumetric energy density.

  11. Formation and transformation of metastable double salts from the crystallization of mixed ammonium nitrate and ammonium sulfate particles. (United States)

    Ling, Tsz Yan; Chan, Chak K


    Ammonium nitrate (AN) and ammonium sulfate (AS) are ubiquitous components of atmospheric aerosols. Thermodynamic models predict formation of pure (AN and AS) and double salts (3AN. AS and 2AN. AS) for the AN/AS system. Because of the high supersaturation at which a droplet crystallizes, metastable crystal formation is possible. In this study, the identity of the crystals formed from the crystallization of equimolar AN/AS mixed droplets was investigated in an electrodynamic balance coupled with a Raman spectroscopic system. Raman spectra of bulk AN/AS double salts possibly formed in this system are first reported for comparison with the single particle Raman results. The double-salt 3AN. AS, not predicted from thermodynamics, was observed in the freshly crystallized single particles. The degree of metastability can be different among several crystallization processes of the same particles. The metastable salt 3AN. AS gradually transformed into stable 2AN. AS, and the rate of such transformation increased with increasing relative humidity. This study illustrates the possibility of occurrence of metastable salts in atmospheric aerosols.

  12. Preparation of Arylthiocyanates Using N,N′-Dibromo-N,N′-bis(2,5-dimethylbenzenesulphonyl ethylenediamine and N,NDibromo-2,5-dimethylbenzenesulphonamide in the Presence of KSCN as a Novel Thiocyanating Reagent

    Directory of Open Access Journals (Sweden)

    Ardeshir Khazaei


    Full Text Available N-Bromosulphonamides, synthesized via direct bromination of sulphonamides, react with several types of arene substrates in the presence of KSCN to afford aryl thiocyanates. The method appears to be generally applicable to benzenoid substrates with a wide range of substituents, such as N,N-dimethylaniline, p-xylene, anisole, mesitylene and cumene.

  13. Quantitative remote sensing of ammonium minerals, Cedar Mountains, Esmeralda County, Nevada (United States)

    Baugh, William M.; Kruse, Fred A.


    Mineral-bound ammonium (NH4+) was discovered by the U.S. Geological Survey in the southern Cedar Mountains of Esmeralda County, Nevada in 1989. At 10 km in length, this site is 100 times larger than any previously known occurrence in volcanic rocks. The ammonium occurs in two hydrothermally altered, crystal-rich rhyolitic tuff units of Oligocene age, and is both structurally and stratigraphically controlled. This research uses Advanced Visible/Infrared Imaging Spectrometer (AVIRIS) data to quantitatively map the mineral-bound ammonium (buddingtonite) concentration in the altered volcanic rocks. Naturally occurring mineral-bound ammonium is fairly rare; however, it has been found to occur in gold-bearing hydrothermal deposits. Because of this association, it is thought that ammonium may be a useful too in exploration for gold and other metal deposits. Mineral-bound ammonium is produced when an ammonium ion (NH4+) replaces the alkali cation site (usually K+) in the crystal structure of silicate minerals such as feldspars, micas and clays. Buddingtonite is an ammonium feldspar. The ammonium originates in buried organic plant matter and is transported to the host rock by hydrothermal fluids. Ammonium alteration does not produce visible changes in the rock, and it is barely detectable with standard x-ray diffraction methods. It is clearly identified, however, by absorption features in short wave-infrared (SWIR) wavelengths (2.0 - 2.5 micrometers). The ammonium absorption features are believed to be caused by N-H vibrational modes and are analogous to hydroxyl (O-H) vibrational modes, only shifted slightly in wavelength. Buddingtonite absorption features in the near- and SWIR lie at 1.56, 2.02 and 2.12 micrometers. The feature at 2.12 micrometer is the strongest of the three and is the only one used in this study. The southern Cedar Mountains are sparsely vegetated and are an ideal site for a remote sensing study.

  14. Contributions of two cytosolic glutamine synthetase isozymes to ammonium assimilation in Arabidopsis roots. (United States)

    Konishi, Noriyuki; Ishiyama, Keiki; Beier, Marcel Pascal; Inoue, Eri; Kanno, Keiichi; Yamaya, Tomoyuki; Takahashi, Hideki; Kojima, Soichi


    Glutamine synthetase (GS) catalyzes a reaction that incorporates ammonium into glutamate and yields glutamine in the cytosol and chloroplasts. Although the enzymatic characteristics of the GS1 isozymes are well known, their physiological functions in ammonium assimilation and regulation in roots remain unclear. In this study we show evidence that two cytosolic GS1 isozymes (GLN1;2 and GLN1;3) contribute to ammonium assimilation in Arabidopsis roots. Arabidopsis T-DNA insertion lines for GLN1;2 and GLN1;3 (i.e. gln1;2 and gln1;3 single-mutants), the gln1;2:gln1;3 double-mutant, and the wild-type accession (Col-0) were grown in hydroponic culture with variable concentrations of ammonium to compare their growth, and their content of nitrogen, carbon, ammonium, and amino acids. GLN1;2 and GLN1;3 promoter-dependent green fluorescent protein was observed under conditions with or without ammonium supply. Loss of GLN1;2 caused significant suppression of plant growth and glutamine biosynthesis under ammonium-replete conditions. In contrast, loss of GLN1;3 caused slight defects in growth and Gln biosynthesis that were only visible based on a comparison of the gln1;2 single- and gln1;2:gln1;3 double-mutants. GLN1;2, being the most abundantly expressed GS1 isozyme, markedly increased following ammonium supply and its promoter activity was localized at the cortex and epidermis, while GLN1;3 showed only low expression at the pericycle, suggesting their different physiological contributions to ammonium assimilation in roots. The GLN1;2 promoter-deletion analysis identified regulatory sequences required for controlling ammonium-responsive gene expression of GLN1;2 in Arabidopsis roots. These results shed light on GLN1 isozyme-specific regulatory mechanisms in Arabidopsis that allow adaptation to an ammonium-replete environment.

  15. Assessment of the potential for ammonium nitrate formation and reaction in Tank 241-SY-101

    Energy Technology Data Exchange (ETDEWEB)

    Pederson, L.R.; Bryan, S.A.


    Two principal scenarios by which ammonium nitrate may be formed were considered: (a) precipitation of ammonium nitrate in the waste, and (b) ammonium nitrate formation via the gas phase reaction of ammonia and nitrogen dioxide. The first of these can be dismissed because ammonium ions, which are necessary for ammonium nitrate precipitation, can exist only in negligibly small concentrations in strongly alkaline solutions. Gas phase reactions between ammonia, nitrogen dioxide, and water vapor in the gas phase represent the most likely means by which ammonium nitrate aerosols could be formed in Tank 241-SY-101. Predicted ammonium nitrate formation rates are largely controlled by the concentration of nitrogen dioxide. This gas has not been detected among those gases vented from the wastes using Fourier Transform Infrared Spectrometry (FTIR) or mass spectrometry. While detection limits for nitrogen dioxide have not been established experimentally, the maximum concentration of nitrogen dioxide in the gas phase in Tank 241-SY-101 was estimated at 0.1 ppm based on calculations using the HITRAN data base and on FTIR spectra of gases vented from the wastes. At 50 C and with 100 ppm ammonia also present, less than one gram of ammonium nitrate per year is estimated to be formed in the tank. To date, ammonium nitrate has not been detected on HEPA filters in the ventilation system, so any quantity that has been formed in the tank must be quite small, in good agreement with rate calculations. The potential for runaway exothermic reactions involving ammonium nitrate in Tank 241-SY-101 is minimal. Dilution by non-reacting waste components, particularly water, would prevent hazardous exothermic reactions from occurring within the waste slurry, even if ammonium nitrate were present. 41 refs.

  16. A facile synthesis of ω-aminoalkyl ammonium hydrogen phosphates

    Institute of Scientific and Technical Information of China (English)

    Wei Bo Kong; Xiao Yong Zhou; Yang Yang; Xing Yi Xie


    A series of ω-aminoalkyl ammonium hydrogen phosphates were synthesized through a simple and efficient three-step method.The starting materials,ω-aminoalkyl alcohols (AC-n,with carbon number n =3,4,5,6),were amino-protected with 9-fluorenylmethyl chloroformate (Fmoc-Cl),followed by phosphorylation with POCl3 and deprotection in piperidine/DMF The structures of each intermediate and final product were confirmed by 1H NMR,FTIR and mass spectrum.The yield of each step was about 77-92%,with a total yield higher than 56%.This new method was superior in low-cost raw materials,mild reaction temperatures (0-25 ℃) and easy purification methods.

  17. Rotavirus gastroenteritis-associated urinary ammonium acid urate crystals. (United States)

    Yokoyama, Tadafumi; Sugimoto, Naotoshi; Kato, Eiji; Ohta, Kazuhide; Ishikawa, Sayaka; Ueno, Kazuyuki; Shimizu, Masaki; Yachie, Akihiro


    Although ammonium acid urate (AAU) calculi are extremely rare renal stone components, it was recently found that many urinary tract calculi that cause post-renal renal failure in rotavirus (RV) gastroenteritis are AAU calculi. The mechanism of AAU calculi development in RV gastroenteritis has not been fully elucidated. We analyzed data from eight RV gastroenteritis patients who transiently had AAU crystals in their urinary sediment. In these patients, formation of AAU crystals occurred earlier than the formation of AAU calculi. No difference was observed in serum and urine uric acid levels between RV gastroenteritis patients with or without AAU crystals. Interestingly, fractional excretion of sodium was extremely low among patients with AAU crystals. These results suggest that the formation of AAU crystals might not be due to excretion of uric acid, but excretion of sodium.

  18. Review of Options for Ammonia/Ammonium Management

    Energy Technology Data Exchange (ETDEWEB)

    Nash, C. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)


    This report is a review of literature supporting practical ammonia/ammonium destruction processes. Melter research supporting Hanford Low Activity Waste (LAW) glass production has shown that significant amounts of ammonia will be in the melter offgas condensate. Further work with secondary waste forms indicates the potential need to remove the ammonia, perhaps by an oxidative process. This review finds likely practical chemical methods to oxidize ammonia in aqueous solution at moderate temperatures and atmospheric pressure, using easily obtained reagents. Leading candidates include nitrite oxidation to produce nitrogen gas, various peroxide oxidative processes, and air stripping. This work reviews many other processes and provides reasoning to not consider those processes further for this application.

  19. Synthesis of tetramethyl ammonium hydroxide by cell diaphragm electrolytic method

    Institute of Scientific and Technical Information of China (English)


    Under the conditions of tetramethyl ammonia chloride (TMAC) used as starting material, Ti-based Dimensionally Stable Anode (DSA), stainless steel used as cathode and Nafion 900 cation membrane as cell diaphragm, this paper studies the synthesis of tetramethyl ammonium hydroxide (TMAH) by cell diaphragm electrolytic method, examining not only the effects of current density, concentration of starting material and cell temperature, on the product purity and current efficiency, but also the effects of electrolyte circulation rate on the service life of Ti-based DSA.The experiment puts forward an optimum processing condition, and experimental findings show that preparing TMAH by using this technique can obtain a current efficiency 74.7 % and get product with a purity greater than 99.9%.

  20. Computational Modeling of Degradation of Substituted Benzyltrimethyl Ammonium: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Long, H.; Pivovar, B. S.


    The degradation of cations on the alkaline exchange membranes is the major challenge for alkaline membrane fuel cells. In this paper, we investigated the degradation barriers by density functional theory for substituted benzyltrimethyl ammonium (BTMA+) cations, which is one of the most commonly used cations for alkaline exchange membranes. We found that substituted cations with electron-releasing substituent groups at meta-position of the benzyl ring could result in improved degradation barriers. However, after investigating more than thirty substituted BTMA+ cations with ten different substituent groups, the largest improvement of degradation barriers is only 1.6 kcal/mol. This implies that the lifetime of alkaline membrane fuel cells could increase from a few months to a few years by using substituted BTMA+ cations, an encouraging but still limited improvement for real-world applications.

  1. Integrated Data Collection Analysis (IDCA) Program — Ammonium Nitrate

    Energy Technology Data Exchange (ETDEWEB)

    Sandstrom, Mary M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Brown, Geoffrey W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Preston, Daniel N. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Pollard, Colin J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Warner, Kirstin F. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Sorensen, Daniel N. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Remmers, Daniel L. [Naval Surface Warfare Center (NSWC), Indian Head, MD (United States). Indian Head Division; Phillips, Jason J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Shelley, Timothy J. [Bureau of Alcohol, Tobacco and Firearms, Redstone Arsenal, AL (United States); Reyes, Jose A. [Applied Research Associates, Tyndall AFB, FL (United States); Hsu, Peter C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Reynolds, John G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)


    The Integrated Data Collection Analysis (IDCA) program is conducting a proficiency study for Small- Scale Safety and Thermal (SSST) testing of homemade explosives (HMEs). Described here are the results for impact, friction, electrostatic discharge, and differential scanning calorimetry analysis of ammonium nitrate (AN). AN was tested, in most cases, as both received from manufacturer and dried/sieved. The participants found the AN to be: 1) insensitive in Type 12A impact testing (although with a wide range of values), 2) completely insensitive in BAM friction testing, 3) less sensitive than the RDX standard in ABL friction testing, 4) less sensitive than RDX in ABL ESD testing, and 5) less sensitive than RDX and PETN in DSC thermal analyses.

  2. Studies on a Cationically Modified Quaternary Ammonium Salt of Lignin

    Institute of Scientific and Technical Information of China (English)

    YANG Ai-li; JIANG Wen-ju


    A new quaternary ammonium salt monomer was synthesized and a quaternary amination of lignin( noted as QL),with the monomer was carried out by grafting copolymerization. The products were characterized by Fourier Transform Infrared spectroscopy(FTIR). The experimental results indicate that the yield of the monomer was 99.06%, and the conversion of the monomer and the grafting yield of QL were 93.69% and 185.78%, respectively. The feasibility of QL as the fiocculant to be applied in color removal of five artificial dyes, eriochrome black T( dye A), gongo red( dye B), direct fast black G (dye C), cuprofix blue green B (dye D), and acid black ATT (dye E) was examined.Results show that QL exhibits the favorable flocculation performance and high stability.

  3. Antibacterial effect of composite resins containing quaternary ammonium polyethyleneimine nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Yudovin-Farber, Ira [Hebrew University of Jerusalem, Department of Medicinal Chemistry and Natural Products, School of Pharmacy, Faculty of Medicine (Israel); Beyth, Nurit; Weiss, Ervin I. [Hebrew University of Jerusalem, Department of Prosthodontics, Faculty of Dentistry (Israel); Domb, Abraham J., E-mail: [Hebrew University of Jerusalem, Department of Medicinal Chemistry and Natural Products, School of Pharmacy, Faculty of Medicine (Israel)


    Quaternary ammonium polyethyleneimine (QA-PEI)-based nanoparticles were synthesized by crosslinking with dibromopentane followed by N-alkylation with various alkyl halides and further N-methylation with methyl iodide. Insoluble pyridinium-type particles were prepared by suspension polymerization of 4-vinyl pyridine followed by N-alkylation with alkyl halides. Polyamine-based nanoparticles embedded in restorative composite resin at 1% w/w were tested for antibacterial activity against Streptococcus mutans using direct contact test. Activity analysis revealed that the alkyl chain length of the QA-PEI nanoparticles plays a significant role in antibacterial activity of the reagent. The most potent compound was octyl-alkylated QA-PEI embedded in restorative composite resin at 1% w/w that totally inhibited S. mutans growth in 3-month-aged samples. This data indicates that restorative composite resin with antibacterial properties can be produced by the incorporation of QA-PEI nanoparticles.

  4. Ammonium nitrate emulsion : physical properties and decomposition using thermal methods

    Energy Technology Data Exchange (ETDEWEB)

    Feng, H.; Goldthorp, S.; Singh, S.; Turcotte, R.


    This presentation discussed methods of determining the physical properties and decomposition rates of commercial water-based explosives. Ammonium nitrate emulsions can explode when heated to critical temperatures or when a localized thermal energy deposition occurs. An accelerating rate calorimeter (ARC) was used to investigate the emulsion under adiabatic conditions. Simultaneous mass spectroscopy (MS) Fourier Transform Infrared (FTIR) and differential scanning calorimetry (DSC) techniques were used to conduct an evolved gas analysis. Results of the analysis demonstrated that the AN emulsions have ARC onset temperatures of approximately 220 degrees C. The mass loss reaction occurred in 2 steps. The initial step was related to water evaporation and oil phase volatilization. The second step was related to AN decomposition in a closed system, and AN dissociation in an open system. tabs., figs.

  5. Lactulose production from cheese whey using recyclable catalyst ammonium carbonate. (United States)

    Seo, Yeong Hwan; Sung, Mina; Han, Jong-In


    Ammonium carbonate ((NH4)2CO3) was used as an alkaline catalyst of lactulose production from cheese whey. Maximum yield of 29.6% was obtained at reaction time of 28.44 min, (NH4)2CO3 of 0.76% at 97°C. During reaction, (NH4)2CO3 was fully decomposed to NH3 and CO2, and these gases were recovered. To boost up NH3 recovery, various methods such as heating, aeration, and pH adjustment were applied. The optimal condition for the purpose of NH3 retrieval was temperature of up to 60°C alongside aeration. Easy separation and recovery make (NH4)2CO3 a catalyst alternative to common alkaline chemicals especially for the weak alkaline reaction.

  6. Ammonium derivatives of chromenones and quinolinones as lead antimicrobial agents

    Indian Academy of Sciences (India)

    Shilpi Gupta; Seema Singh; Abha Kathuria; Manish Kumar; Sweta Sharma; Ram Kumar; Virinder S Parmar; Bharat Singh; Anjali Gupta; Erik Van Der Eycken; Gainda L Sharma; Sunil K Sharma


    A series of novel ammonium derivatives were synthesized and examined for their antimicrobial efficacy. Comparison of antimicrobial spectrum revealed that compounds 9, 11, 16 and 23 had strong potential against pathogens in vitro. Cytotoxicity results showed compound 9 to be least toxic, it is non-toxic to A549 and U87 cells in MTT assay and exhibits marginal toxicity (15-20%) to human erythrocytes at a concentration of 1000 g/ml as compared to 100% lysis of cells by 31.25 g/ml of the standard drug amphotericin B. This compound has MIC values in the range of 1.95-31.25 g/disc in DDA against different pathogens and may considered to be an important lead antimicrobial molecule for further exploration.

  7. Polishing of quartz by rapid etching in ammonium bifluoride. (United States)

    Vallin, Orjan; Danielsson, Rolf; Lindberg, Ulf; Thornell, Greger


    The etch rate and surface roughness of polished and lapped AT-cut quartz subjected to hot (90, 110, and 130 degrees C), concentrated (50, 65, 80 wt %) ammonium bi-fluoride have been investigated. Having used principal component analysis to verify experimental solidity and analyze data, we claim with confidence that this parameter space does not, as elsewhere stated, allow for a polishing effect or even a preserving setting. Etch rates were found to correlate well, and possibly logarithmically, with temperature except for the hottest etching applied to lapped material. Roughness as a function of temperature and concentration behaved well for the lapped material, but lacked systematic variation in the case of the polished material. At the lowest temperature, concentration had no effect on etch rate or roughness. Future efforts are targeted at temperatures and concentrations closer to the solubility limit.

  8. Polymerization and photochromism of ammonium molybdate in porous glass (United States)

    Pak, V. N.; Borisov, A. N.


    Modification of porous glass (PG) plates is carried out by impregnation with aqueous solutions of ammonium molybdate (NH4)2MoO4 with subsequent removal of water at 120°C. A long-wavelength shift of absorption spectra upon accumulation of the salt in PG indicates polymerization of MoO 4 2- anions at low concentrations of the encapsulated salt. Photochromism manifests itself as the anionic forms in PG become larger. UV irradiation of the modified plates causes enhancement of continuous absorption in the visible range. The proposed mechanism of photoreduction of the polianions in PG involves the removal of oxygen atoms from the bridging-Mo-O-Mo-bonds and stabilization of the colored forms by means of conjugation of the electrons released from the 4 d-levels of pentavalent molybdenum.

  9. Crystal structure of tris-(hydroxyl-ammonium) orthophosphate. (United States)

    Leinemann, Malte; Jess, Inke; Boeckmann, Jan; Näther, Christian


    The crystal structure of the title salt, ([H3NOH](+))3·[PO4](3-), consists of discrete hydroxyl-ammonium cations and ortho-phos-phate anions. The atoms of the cation occupy general positions, whereas the anion is located on a threefold rotation axis that runs through the phospho-rus atom and one of the phosphate O atoms. In the crystal structure, cations and anions are linked by inter-molecular O-H⋯O and N-H⋯O hydrogen bonds into a three-dimensional network. Altogether, one very strong O-H⋯O, two N-H⋯O hydrogen bonds of medium strength and two weaker bifurcated N-H⋯O inter-actions are observed.

  10. Antibacterial effect of composite resins containing quaternary ammonium polyethyleneimine nanoparticles (United States)

    Yudovin-Farber, Ira; Beyth, Nurit; Weiss, Ervin I.; Domb, Abraham J.


    Quaternary ammonium polyethyleneimine (QA-PEI)-based nanoparticles were synthesized by crosslinking with dibromopentane followed by N-alkylation with various alkyl halides and further N-methylation with methyl iodide. Insoluble pyridinium-type particles were prepared by suspension polymerization of 4-vinyl pyridine followed by N-alkylation with alkyl halides. Polyamine-based nanoparticles embedded in restorative composite resin at 1% w/w were tested for antibacterial activity against Streptococcus mutans using direct contact test. Activity analysis revealed that the alkyl chain length of the QA-PEI nanoparticles plays a significant role in antibacterial activity of the reagent. The most potent compound was octyl-alkylated QA-PEI embedded in restorative composite resin at 1% w/w that totally inhibited S. mutans growth in 3-month-aged samples. This data indicates that restorative composite resin with antibacterial properties can be produced by the incorporation of QA-PEI nanoparticles.

  11. Cold Case: Radar investigation of ammonium sulfate cryovolcanism on Titan (United States)

    Thomann, C.; Hayes, A. G.; Hofgartner, J.; Lunine, J. I.; Le Gall, A.


    The detection of a large tidal k2 value from Cassini [1] constitutes very strong evi-dence for a subcrustal ocean, most plausibly dominated by water. However, the secondary constituents are not known. One interesting possibility that has received scant attention in analysis of surface data sets is that the ocean contain aqueous ammonium sulfates, which erupted on the surface in the past to create vast, smooth plains [2]. We adopt the hypothesis that the undifferentiated plains—the "bland-lands" in the mid-latitudes of Titan—are these deposits, and test it using radiometry with SAR data. Lopez et al (this conference) investigate the global distribution and possible origin of this type of unit. We extracted SAR and radiometry-during-SAR data sets from the PDS, and pro-duced maps of brightness temperatures. The SAR imagery was used to identify locations where crossovers exist -some of which are in the undifferentiated plains--and hence where brightness temperatures at different incidence angles are available. We derived emissivities from the data using a simple radiometric model [3] to ac-count for the brightness temperature differences as a function of surface roughness, volume scattering and emissivity. We test the hypothesis by assessing whether the derived emissivities and volume scattering in the bland-lands are consistent with the model cryoclastic ash of ice and ammonium sulfate proposed in [2], distinct from that in other terrains. [1] L. Iess, R.A. Jacobson, M. Ducci, D.J. Stevenson, J.I. Lunine, J.W. Armstrong, S.W. Asmar, P. Racioppa, N.J. Rappaport, P. Tortora, Science, 337, 457 (2012). [2] A.D. Fortes, P.M. Grinrod, S.K. Trickett, L. Vocadlo. Icarus, 188, 139 (2007). [3] T.L. White and J.R. Cogdell. The Moon, 6, 235 (1973).

  12. Ammonium addition inhibits 13C-methane incorporation into methanotroph membrane lipids in a freshwater sediment

    NARCIS (Netherlands)

    Nold, s.c.; Boschker, H.T.S.; Pel, R.; Laanbroek, H.J.


    To investigate the effect of ammonium addition on the species composition and activity of freshwater methane oxidizing bacteria, intact sediment cores were labeled with (CH4)-C-13 and incubated under ambient and elevated ammonium concentrations. After 7 days, methanotroph activity was assessed by qu

  13. Clinoptilolite-based mixed matrix membranes for the selective recovery of potassium and ammonium

    NARCIS (Netherlands)

    Casadella, A.; Kuntke, P.; Schaetzle, O.; Loos, K.


    . A clinoptilolite-based mixed matrix membrane (MMM) was developed and studied for the selective recovery of ammonium and potassium. Adsorption of sodium (Na+), potassium (K+) and ammonium (NH4+) was investigated with single salt and equimolar salt solution under static and dynamic conditions. Furth

  14. Ammonium sorption from aqueous solutions by the natural zeolite Transcarpathian clinoptilolite studied under dynamic conditions. (United States)

    Sprynskyy, Myroslav; Lebedynets, Mariya; Terzyk, Artur P; Kowalczyk, Piotr; Namieśnik, Jacek; Buszewski, Bogusław


    The scope of this study is ammonium-ion uptake from synthetic aqueous solutions onto raw and pretreated forms of the natural zeolite Transcarpathian clinoptilolite under dynamic conditions. Hydrogen ions displaced exchangeable cations on the clinoptilolite in distilled water (sodium ions) and hydrochloric acid (sodium, potassium, and calcium ions) and destroyed the zeolite framework structure in the last case. Ammonium uptake onto the zeolite occurs by exchange with Na(+), Ca(2+), and K(+) ions. Although Na(+) ions were observed to be more easily exchanged for both hydrogen and ammonium ions, the role of Ca(2+) ions increased with zeolite saturation by NH(+)(4) ions. The maximum sorption capacity of the clinoptilolite toward NH(+)(4) ions, estimated under dynamic conditions, is significantly higher than that measured under static conditions; proximity of the values of a distribution coefficient and a retardation factor for different conditions (215-265 dm(3)/kg and 979-1107, respectively) allows us to use these parameters to model ammonium uptake onto the clinoptilolite. Slowing down or interruption in filtration resulted in the improvement of ammonium sorption properties of the zeolite. The ammonium removal improves with use of the finer fractions of the clinoptilolite up to 0.35 mm. A recycling study results confirmed the importance of external diffusion for ammonium sorption by the clinoptilolite. Preliminary treatment of the sorbent confirmed the predominant importance of the ion-exchange mechanism. The advantage of prior NaCl treatment of the clinoptilolite in improvement of ammonium removal over the other techniques was shown.

  15. Novel carbohydrate-based chiral ammonium ionic liquids derived from isomannide

    DEFF Research Database (Denmark)

    Kumar, Vineet; Pei, Cao; Olsen, Carl E.


    This report describes the synthesis and characterization of novel carbohydrate-based chiral ammonium ionic liquids using isomannide as a biorenewable substrate. The diastereomeric interactions of these chiral ammonium ionic liquids with racemic Mosher's acid salt have been studied using NMR, whic...

  16. Electroantennogram and behavioral responses of Anastrepha suspensa (Diptera: Tephritidae) to putrescine and ammonium bicarbonate lures. (United States)

    Kendra, Paul E; Montgomery, Wayne S; Epsky, Nancy D; Heath, Robert R


    At present, the most effective synthetic lures for pest Anastrepha fruit flies are multicomponent blends that include ammonia and the diamine synergist putrescine (1,4-diaminobutane). Both chemicals generally have been regarded as protein cues that result in female-biased attraction. Using electroantennography (EAG) and flight tunnel bioassays, this study evaluated response of the Caribbean fruit fly, Anastrepha suspensa (Loew) to vapors released from commercial lure formulations of ammonium bicarbonate and putrescine. Over a range of doses tested, EAG response to ammonium bicarbonate was equivalent for both sexes, but female response was significantly greater than male response to putrescine and to a 1:1 mixture of ammonium bicarbonate and putrescine. Amplitude of EAG response to the mixture was approximately equal to the summation of responses to the individual substrates. Using a fixed dose of substrate, EAG measurements from females 1-14 d old indicated that antennal sensitivity to both lures varied according to physiological state of the fly. Peak response to ammonium bicarbonate was recorded from immature females, peak response to putrescine from sexually mature females. In bioassays, more females were captured with ammonium bicarbonate plus putrescine than with ammonium bicarbonate alone. This difference was not observed in males, resulting in a higher female to male ratio in captures with ammonium bicarbonate plus putreseine (3:1) versus ammonium bicarbonate alone (1:1). Results suggest that separate olfactory receptors are involved in detection of the two semiochemicals, and that the putrescine component is primarily responsible for the female-biased attraction.

  17. 40 CFR 721.10154 - Quaternary ammonium compounds, dicoco alkyldimethyl, chlorides, reaction products with silica. (United States)


    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Quaternary ammonium compounds, dicoco alkyldimethyl, chlorides, reaction products with silica. 721.10154 Section 721.10154 Protection of Environment... SUBSTANCES Significant New Uses for Specific Chemical Substances § 721.10154 Quaternary ammonium...

  18. Effect of quaternary ammonium salts on flotation behavior of aluminosilicate minerals

    Institute of Scientific and Technical Information of China (English)

    ZHAO Sheng-gui; ZHONG Hong; LIU Guang-yi


    The electrokinetic properties and flotation of diaspore, kaolinite, pyrophyllite and illite with quaternary ammonium salts collectors were studied. The results of flotation tests show that the collecting ability of quaternary ammonium salts for the four minerals is in the order(from strong to weak) of octadecyl dimethyl benzyl ammonium chloride(ODBA), cetyl trimethyl ammonium bromide(CTAB), dodecyl trimethyl ammonium chloride(DTAC). Under the condition of alkalescence, it is possible to separate the diaspore from the silicate minerals such as kaolinite, illite and pyrophyllite using quaternary ammonium salts as collector. Isoelectric points (IEP) of diaspore, kaolinite, pyrophyllite and illite are pH=6.0, 3.4, 2.3 and 3.2, respectively. Quaternary ammonium salts can change ζ-potential of the aluminosilicate minerals obviously. The flotation mechanisms were explained by ζ-potential and Fourier transform infrared spectrum (FT-IR) measurements. The results demonstrate that only electrostatic interaction takes place between aluminosilicate minerals (diaspore, kaolinite, pyrophyllite and illite) and quaternary ammonium salts.

  19. Ammonium-oxidizing bacteria facilitate aerobic degradation of sulfanilic acid in activated sludge. (United States)

    Chen, Gang; Ginige, Maneesha P; Kaksonen, Anna H; Cheng, Ka Yu


    Sulfanilic acid (SA) is a toxic sulfonated aromatic amine commonly found in anaerobically treated azo dye contaminated effluents. Aerobic acclimatization of SA-degrading mixed microbial culture could lead to co-enrichment of ammonium-oxidizing bacteria (AOB) because of the concomitant release of ammonium from SA oxidation. To what extent the co-enriched AOB would affect SA oxidation at various ammonium concentrations was unclear. Here, a series of batch kinetic experiments were conducted to evaluate the effect of AOB on aerobic SA degradation in an acclimatized activated sludge culture capable of oxidizing SA and ammonium simultaneously. To account for the effect of AOB on SA degradation, allylthiourea was used to inhibit AOB activity in the culture. The results indicated that specific SA degradation rate of the mixed culture was negatively correlated with the initial ammonium concentration (0-93 mM, R²= 0.99). The presence of AOB accelerated SA degradation by reducing the inhibitory effect of ammonium (≥ 10 mM). The Haldane substrate inhibition model was used to correlate substrate concentration (SA and ammonium) and oxygen uptake rate. This study revealed, for the first time, that AOB could facilitate SA degradation at high concentration of ammonium (≥ 10 mM) in an enriched activated sludge culture.

  20. On the influence of thiamine and ammonium ions on alcoholic fermentation

    NARCIS (Netherlands)

    Maesen, Th.J.M.


    1. 1. In a glucose-sodium acetate medium of pH 5.6 the fermentation rate of bakers' yeast remains constant at a low level during several hours, while in the presence of ammonium sulphate it gradually increases. The rise is steeper in the presence of thiamine. 2. 2. After the ammonium ions have been

  1. The effect of the ammonium ion on activated-sludge settling properties

    DEFF Research Database (Denmark)

    Novak, John Thomas


    by addition of sodium or ammonium, the interfacial settling velocity decreased, although the greatest drop was in the reactor containing ammonium. When addition of the nitrification inhibitor was stopped, rapid recovery of nitrification occurred but the settling properties improved more slowly. It seemed...

  2. Nitrogen phosphoric fertilizer production technology on the base of Central Kyzylkum phosphorites and ammonium nitrate melt

    Directory of Open Access Journals (Sweden)

    Shavkat Namazov


    Full Text Available The process of obtaining nitrogen phosphoric fertilizer by introduction Central Kyzylkum phosphates and ammonium nitrate melt is studied. On the base of these results production technology diagram for nitrogen phosphoric fertilizer is offered. The given technology was approved and developed at the functioning devices of OJSC “NAVOIAZOT” ammonium nitrate shop.

  3. Ammonium assimilation: An important accessory during aerobic denitrification of Pseudomonas stutzeri T13. (United States)

    Sun, Yilu; Feng, Liang; Li, Ang; Zhang, Xuening; Yang, Jixian; Ma, Fang


    The present study investigated effect of ammonium utilization on aerobic denitrification by Pseudomonas stutzeri T13. Per nitrogen balance calculation, all consumed ammonium was utilized as nitrogen source for cell propagation by assimilation rather than heterotrophic nitrification. Total organic carbon (TOC) and ammonium were necessary substrates to sustain heterotrophic propagation of P. stutzeri T13 at optimum proportion equal to seven. Under aerobic condition, nitrate was utilized as substitute nitrogen source when ammonium was completely exhausted. Biomass production effectively increased with increasing initial ammonium from 0mg/L to 100mg/L. Owing to enlarged biomass, average nitrate reduction rate increased from 7.36mgL(-1)h(-1) to 11.95mgL(-1)h(-1). Such process also successfully reduced nitrite accumulation from 121.8mg/L to 66.16mg/L during aerobic denitrification. As important accessory during aerobic denitrification, ammonium assimilation efficiently doubled total nitrogen (TN) removal from 54.97mg/L (no ammonium provided) to 113.1mg/L (100mg/L ammonium involved).

  4. 75 FR 56489 - Separation Distances of Ammonium Nitrate and Blasting Agents From Explosives or Blasting Agents... (United States)


    ... Ammonium Nitrate and Blasting Agents From Explosives or Blasting Agents (2002R-226P) AGENCY: Bureau of... CFR 555.220 set forth a table of separation distances of ammonium nitrate and blasting agents from explosives or blasting agents followed by six explanatory notes. Note three (3) states that the...

  5. Sulfuric acid-ammonium sulfate aerosol: optical detection in the St. Louis region. (United States)

    Charlson, R J; Vanderpol, A H; Covert, D S; Waggnoner, A P; Ahlquist, N C


    Nephelometric sensing of the deliquescence of ammonium sulfate produced by the reaction of sulfuric acid or ammonium bisulfate aerosol with ammonia provides a means for detecting these substances in air. Field experiments show them to be the dominant substances in the submicrometer, light-scattering aerosol in the St. Louis region.

  6. 75 FR 41725 - Food Additives Permitted in Feed and Drinking Water of Animals; Ammonium Formate (United States)


    ... Additives Permitted in Feed and Drinking Water of Animals; Ammonium Formate AGENCY: Food and Drug... regulations for food additives permitted in feed and drinking water of animals to provide for the safe use of ammonium formate as an acidifying agent in swine feed. This action is in response to a food...

  7. Alkali metal and ammonium chlorides in water and heavy water (binary systems)

    CERN Document Server

    Cohen-Adad, R


    This volume surveys the data available in the literature for solid-fluid solubility equilibria plus selected solid-liquid-vapour equilibria, for binary systems containing alkali and ammonium chlorides in water or heavy water. Solubilities covered are lithium chloride, sodium chloride, potassium chloride, rubidium chloride, caesium chloride and ammonium chloride in water and heavy water.

  8. Suppression of interference in the AAS determination of chromium by use of ammonium bifluoride. (United States)

    Purushottam, A; Naidu, P P; Lal, S S


    Addition of 1% of ammonium bifluoride successfully suppresses interference by diverse ions in the atomic-absorption determination of chromium(VI). If the sample solutions also contain chromium(III) addition of 1% of ammonium bifluoride and 0.2% of sodium sulphate is recommended for the suppression.

  9. Irritant contact dermatitis due to ammonium bifluoride in two infant twins. (United States)

    Toledo, Fernando; Silvestre, Juan Francisco; Cuesta, Laura; Bañuls, José


    Ammonium bifluoride is one of the most corrosive acids that may produce severe chemical burns when in contact with skin. This hazardous chemical is widely used in household products. We report two pediatric cases of irritant contact dermatitis after exposure to a rust remover, which contained ammonium bifluoride.

  10. Nitrogen removal by autotrophic ammonium oxidizing bacteria enrichment under anaerobic conditions

    Directory of Open Access Journals (Sweden)

    Pongsak (Lek Noophan


    Full Text Available Sludge from an anoxic tank at the centralized wastewater treatment plant, Nong Khaem, Bangkok, Thailand, was inoculatedin an anaerobic sequencing batch reactor (ASBR. The optimal compositions and operating conditions of the stock of autotrophic ammonium oxidizing bacteria medium were determined. The process of oxidizing ammonium with bacteria under anaerobic conditions is often referred to as the Anammox process (NO2- to N2 gas, using NH4+ as the electron donor and NO2- as the electron acceptor. The startup period for the anammox culture took more than three months. With ammoniumand nitrite concentration ratios of 1:1.38 and 1:1.6, the nitrogen conversion rate zero order. Fluorescent in situ hybridization(FISH was used to identify specific autotrophic ammonium oxidizing bacteria (Nitrosomonas spp., Candidatus Brocadia anammoxidans, and Candidatus Kuenenia stuttgartiensis. Results from this work demonstrated a shift in the species of ammonium oxidizing bacteria from Nitrosomonas spp. to Candidati Brocadia anammoxidans and Kuenenia stuttgartiensis, with increased ammonium concentrations from 3 mM to 15 mM. Under NH4+:NO2- ratios of 1:1.38 and 1:1.6 the ammoniumoxidizing bacteria were able to remove both ammonium and nitrite simultaneously. The specific nitrogen removal rate of theanammox bacteria (Candidati Brocadia anammoxidans and Kuenenia stuttgartiensis was significantly higher than that of anaerobic ammonium oxidizing bacteria (Nitrosomonas spp.. Anaerobic ammonium oxidizing bacteria (Candidati Brocadia anammoxidans and Kuenenia stuttgartiensis are strict anaerobes.

  11. Ammonium across a Selective Polymer Inclusion Membrane : Characterization, Transport, and Selectivity

    NARCIS (Netherlands)

    Casadella, Anna; Schaetzle, Olivier; Loos, Katja


    The recovery of ammonium from urine requires distinguishing and excluding sodium and potassium. A polymer inclusion membrane selective for ammonium is developed using an ionophore based on pyrazole substituted benzene. The interactions of the components are studied, as well as their effect on transp

  12. Interactions between nitrate and ammonium in their uptake, allocation, assimilation, and signaling in plants. (United States)

    Hachiya, Takushi; Sakakibara, Hitoshi


    Nitrogen (N) availability is a major factor determining plant growth and productivity. Plants acquire inorganic N from the soil, mainly in the form of nitrate and ammonium. To date, researchers have focused on these N sources, and demonstrated that plants exhibit elaborate responses at both physiological and morphological levels. Mixtures of nitrate and ammonium are beneficial in terms of plant growth, as compared to nitrate or ammonium alone, and therefore synergistic responses to both N sources are predicted at different steps ranging from acquisition to assimilation. In this review, we summarize interactions between nitrate and ammonium with respect to uptake, allocation, assimilation, and signaling. Given that cultivated land often contains both nitrate and ammonium, a better understanding of the synergism between these N sources should help to identify targets with the potential to improve crop productivity.

  13. Kinetics Analysis on Mixing Calcination Process of Fly Ash and Ammonium Sulfate

    Institute of Scientific and Technical Information of China (English)

    Peng Wang; Laishi Li; Dezhou Wei


    abstract The further development of the extraction of alumina that is produced in the calcination process of ammonium sulfate mixed with fly ash was limited because of the lack of systematic theoretical study. In order to aggrandize the research of the calcination process, the kinetics and reaction mechanism of the calcinations were studied. The result suggests that there are two stages in the calcination process, and the alumina extraction rate increases swiftly in the initial stage, but slows down increasing in the later stage. The apparent activation energy of the initial and later stages equals to 13.31 and 35.65 kJ·mol-1, respectively. In the initial stage, ammonium sulfate reacts directly with mullite in the fly ash to form ammonium aluminum sulfate, while in the later stage, alumi-num sulfate is formed by the reaction between ammonium aluminum sulfate and ammonium sulfate.

  14. Anaerobic ammonium oxidation in traditional municipal wastewater treatment plants with low-strength ammonium loading: Widespread but overlooked. (United States)

    Wang, Shanyun; Peng, Yongzhen; Ma, Bin; Wang, Shuying; Zhu, Guibing


    Occurrence of anaerobic ammonium oxidation (anammox) in marine and freshwater systems has greatly changed our understanding of global nitrogen (N) cycle and promoted the investigation of the role and ecological features of anammox in anthropogenic ecosystems. This study focused on the spatio-temporal abundance, activity, and biodiversity of anammox bacteria in full-scale municipal wastewater treatment plants (WWTPs) via traditional nitrification/denitrification route with low-strength ammonium loading. The anammox bacteria were detected in all the treatment units at the five WWTPs tested, even in aerobic zones (dissolved oxygen >2 mg L(-1)) with abundance of 10(5)-10(7) hydrazine synthase (hzs) gene copies g(-1). The (15)N-isotope tracing technology revealed that the anammox rates in WWTPs ranged from 0.08 to 0.36 μmol N g(-1) h(-1) in winter and 0.12-1.20 μmol N g(-1) h(-1) in summer with contributions of 2.05-6.86% and 1.71-7.26% to N2 production, respectively. The diversity of anammox bacteria in WWTPs was distributed over only two genera, Brocadia and Kuenenia. Additionally, the exploration of potential interspecies relationships indicated that ammonia oxidation bacteria (AOB) was the major nitrite-substrate producer for anammox during nitrification, while Nitrospira, a nitrite oxidation bacteria (NOB), was the potential major competitor for nitrite. These results suggested the contribution of N-removal by the widespread of anammox has been overlooked in traditional municipal WWTPs, and the ecological habitats of anammox bacteria in anthropogenic ecosystems are much more abundant than previously assumed.

  15. Fabrication of ammonium perchlorate/copper-chromium oxides core-shell nanocomposites for catalytic thermal decomposition of ammonium perchlorate

    Energy Technology Data Exchange (ETDEWEB)

    Eslami, Abbas, E-mail: [Department of Inorganic Chemistry, Faculty of Chemistry, University of Mazandaran, P.O.Box 47416-95447, Babolsar (Iran, Islamic Republic of); Juibari, Nafise Modanlou [Department of Inorganic Chemistry, Faculty of Chemistry, University of Mazandaran, P.O.Box 47416-95447, Babolsar (Iran, Islamic Republic of); Hosseini, Seyed Ghorban [Department of Chemistry, Malek Ashtar University of Technology, P.O. Box 16765-3454, Tehran (Iran, Islamic Republic of)


    The ammonium perchlorate/Cu(II)-Cr(III)-oxides(AP/Cu-Cr-O) core-shell nanocomposites were in-situ prepared by deposition of copper and chromium oxides on suspended ammonium perchlorate particles in ethyl acetate as solvent. The results of differential scanning calorimetery (DSC) and thermal gravimetric analysis (TGA) experiments showed that the nanocomposites have excellent catalytic effect on the thermal decomposition of AP, so that the released heat increases up to about 3-fold over initial values, changing from 450 J/g for pure AP to 1510 J/g for most appropriate mixture. For better comparison, single metal oxide/AP core-shell nanocomposite have also been prepared and the results showed that they have less catalytic effect respect to mixed metal oxides system. Scanning electron microscopy (SEM) results revealed homogenous deposition of nanoparticles on the surface of AP and fabrication of core-shell structures. The kinetic parameters of thermal decomposition of both pure AP and AP/Cu-Cr-O samples have been calculated by Kissinger method and the results showed that the values of pre-exponential factor and activation energy are higher for AP/Cu-Cr-O nanocomposite. The better catalytic effect of Cu-Cr-O nanocomposites is probably attributed to the synergistic effect between Cu{sup 2+} and Cr{sup 3+} in the nanocomposites, smaller particle size and more crystal defect. - Highlights: • The Cu-Cr-O nanoparticles were synthesized by chemical liquid deposition method. • Then, the AP/Cu-Cr-O core-shell nanocomposites were prepared. • The core-shell samples showed high catalytic activity for AP decomposition. • Thermal decomposition of samples occurs at lower temperature range.

  16. Pseudocapacitance of MnO{sub 2} originates from reversible insertion/desertion of thiocyanate anions studied using in situ X-ray absorption spectroscopy in ionic liquid electrolyte

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Ming-Tsung; Tsai, Wen-Ta; Chang, Jeng-Kuei [Department of Materials Science and Engineering, National Cheng Kung University, 1 University Road, Tainan (China); Deng, Ming-Jay; Cheng, Hui-Fang; Sun, I-Wen [Department of Chemistry, National Cheng Kung University, 1 University Road, Tainan (China)


    Charge storage mechanisms of electrodeposited MnO{sub 2} in various aprotic ionic liquids (ILs) are studied using in situ X-ray absorption spectroscopy (XAS). The analytical results show that a unique thiocyanate (SCN{sup -}) anion can reversibly insert/desert into/from the tunnels between the [MnO{sub 6}] octahedral subunits depending on the applied potential. This process charge compensates the Mn{sup 3+}/Mn{sup 4+} redox transition upon charging-discharging and thus contributes to an ideal pseudocapacitive behavior of the MnO{sub 2} electrode. The present work would open up a route for developing a novel oxide-based supercapacitor, with high cell-voltage, high thermal stability, and high safety, incorporating IL electrolytes. (author)

  17. Relating dynamic conditions to the performance of biological rapid sand filters used to remove ammonium, iron, and manganese from drinking water

    DEFF Research Database (Denmark)

    Lee, Carson; Albrechtsen, Hans-Jørgen; Smets, Barth F.;

    and media samples were collected throughout the depth of the column and over the operational cycle of the columns. Substrate analysis included ammonium, nitrite, nitrate, iron, and manganese. Qpcr analysis were also performed to quantify ammonium oxidizing bacteria (AOBs), ammonium oxidizing archea ( AOAs...... on the roles of both Ammonium oxidizing bacteria (AOBs) and Ammonium oxidizing archea (AOAs) in the biological removal of ammonium in rapid sand filters and how varying substrate loadings and operating conditions can affect the biological performance of these filters....

  18. 21 CFR 878.4015 - Wound dressing with poly (diallyl dimethyl ammonium chloride) (pDADMAC) additive. (United States)


    ... ammonium chloride) (pDADMAC) additive. 878.4015 Section 878.4015 Food and Drugs FOOD AND DRUG... DEVICES Surgical Devices § 878.4015 Wound dressing with poly (diallyl dimethyl ammonium chloride) (pDADMAC... Dressing With Poly (Diallyl Dimethyl Ammonium Chloride) (pDADMAC) Additive.” See § 878.1(e)...

  19. 76 FR 34749 - Ammonium Nitrate From Russia; Scheduling of an expedited five-year review concerning the... (United States)


    ... COMMISSION Ammonium Nitrate From Russia; Scheduling of an expedited five- year review concerning the antidumping duty order on ammonium nitrate From Russia AGENCY: United States International Trade Commission... whether revocation of the antidumping duty order on ammonium nitrate from Russia would be likely to...

  20. 77 FR 73674 - Ammonium Nitrate From Ukraine; Notice of Revised Schedule of the Five-year Review Concerning the... (United States)


    ...)] Ammonium Nitrate From Ukraine; Notice of Revised Schedule of the Five-year Review Concerning the Antidumping Duty Order on Ammonium Nitrate From Ukraine AGENCY: United States International Trade Commission... established a schedule for the conduct of the 5-year review of Ammonium Nitrate from Ukraine (77 FR...

  1. 40 CFR 721.6540 - Acrylamide, polymers with tetraalkyl ammonium salt and polyalkyl, aminoalkyl meth-a-cryl-a-mide... (United States)


    ... ammonium salt and polyalkyl, aminoalkyl meth-a-cryl-a-mide salt. 721.6540 Section 721.6540 Protection of... with tetraalkyl ammonium salt and polyalkyl, aminoalkyl meth-a-cryl-a-mide salt. (a) Chemical... as acrylamide, polymers with tetraalkyl ammonium salt and poly-al-kyl, amino alkyl...

  2. Upgrading fertilizer production wastewater effluent quality for ammonium discharges through ion exchange with clinoptilolite. (United States)

    Beler-Baykal, B; Allar, A D


    It had previously been shown that ammonium selective natural zeolite clinoptilolite may be used successfully as an ion exchanger for ammonium removal and nitrogen control from domestic wastewater. The process had been reported to be acceptable either by itself alone or as an upgrade. In this work, the possibility of using clinoptilolite for ammonium removal from fertilizer production wastewater was investigated. The fertilizer plant under consideration was rather a non-typical one with a lower ammonium strength than what is normally expected, and a variable effluent concentration. Batch experiments were performed to assess the capacity of clinoptilolite towards ammonium removal from an industrial wastewater at two different pHs. Flow experiments for the characterization of system behavior under continuous feeding conditions at different contact times were conducted for breakthrough analysis. Both real and simulated fertilizer wastewater samples were investigated and the results have shown that the real one may successfully be represented by the simulated one. Experimental results have shown that surface capacities exceeding 14 mg ammonium g(-1) clinoptilolite could be attained, complete removal of ammonium may be achieved with empty bed contact times of 10 min or higher and ion exchange with clinoptilolite could be used successfully to comply with the effluent standards given for the fertilizer plant.

  3. Coastal water column ammonium and nitrite oxidation are decoupled in summer (United States)

    Heiss, Elise M.; Fulweiler, Robinson W.


    Water column nitrification is a key process in the nitrogen cycle as it links reduced and oxidized forms of nitrogen and also provides the substrate (nitrate) needed for reactive nitrogen removal by denitrification. We measured potential water column ammonium and nitrite oxidation rates at four sites along an estuary to continental shelf gradient over two summers. In most cases, nitrite oxidation rates outpaced ammonium oxidation rates. Overall, ammonium and nitrite oxidation rates were higher outside of the estuary, and this trend was primarily driven by higher oxidation rates in deeper waters. Additionally, both ammonium and nitrite oxidation rates were impacted by different in situ variables. Ammonium oxidation rates throughout the water column as a whole were most positively correlated to depth and salinity and negatively correlated to dissolved oxygen and light. In contrast, nitrite oxidation rates throughout the water column were negatively correlated with light and pH. Multivariate regression analysis revealed that while both surface (20 m) ammonium oxidation rates were most strongly predicted by depth and light, surface rates were also regulated by salinity and deep rates by temperature. Surface (20 m) nitrite oxidation rates. These results support the growing body of evidence that ammonium oxidation and nitrite oxidation are not always coupled, should be measured separately, and are influenced by different environmental conditions.

  4. Preparation and characteristic research of anhydrous magnesium chloride with dehydrated ammonium carnallite

    Institute of Scientific and Technical Information of China (English)

    ZHOU Ning-bo; CHEN Bai-zhen; HE Xin-kuai; LI Yi-bing


    Taking the saline lake bischofite and NH4Cl that was removed with the ammonia method and continuwas synthesized. And then the ammonium carnallite was dehydrated to some extent at 160℃ for 4 h. Ammonium carnallite reacted with ammonia at 240℃ for 150 min and the ammonation ammonium carnallite was produced. Finally, the ammonation ammonium carnallite was calcined at 750℃ into anhydrous magnesium chloride containing only 0.1% (mass fraction) of MgO. On the other hand, dehydrated ammonium carnallite was mixed with the solid ammonium chloride at mass ratio 1:4 at high temperature and with the differential pressure of HN3 above 30.5 kPa. The dehydrated ammonium carnallite of mixture was dehydrated at 410℃, and then calcined at 700℃ into anhydrous magnesium chloride with only 0. 087% (mass fraction) of MgO. X-ray diffraction and electron microscopy analysis results prove that anhydrous magnesium chloride obtained by both methods hasn't mixed phases, the particle is large and even has good dispersion, which is suitable for preparation of metal magnesium in the electrolysis.

  5. Ammonium and potassium removal from swine liquid manure using clinoptilolite, chabazite and faujasite zeolites. (United States)

    Montégut, Gaëtan; Michelin, Laure; Brendlé, Jocelyne; Lebeau, Bénédicte; Patarin, Joël


    This study concerns cationic exchanges performed in order to remove ammonium and potassium cations from manure by using various zeolites: clinoptilolite, chabazite and NaX faujasite. First, the effect of temperature (25 °C and 40 °C) on the exchange rate between zeolites and an ammonium chloride solution was investigated. Then, cationic exchanges were performed on these three zeolites using on one side a mixed ammonium and potassium chloride solution reproducing the chemical composition of a swine manure and on the other side the corresponding liquid manure. No significant difference was observed on the exchange rate and the trapping of ammonium cations by changing the temperature (25 or 40 °C). Clinoptilolite showed a good selectivity towards ammonium cations using model (NH4Cl, and mixed NH4Cl/KCl) solutions but is less efficient with the liquid manure. Chabazite and faujasite were found more efficient than clinoptilolite for trapping ammonium cations. However, NaX faujasite enables trapping 3 times more ammonium cations than chabazite from manure (60 and 20 mg/g, respectively). Moreover, chabazite allowed to trap the same amount of potassium cations than NaX faujasite (33 and 35 mg/g, respectively).

  6. Paleosols in central Illinois as potential sources of ammonium in groundwater (United States)

    Glessner, J.J.G.; Roy, W.R.


    Glacially buried paleosols of pre-Holocene age were evaluated as potential sources for anomalously large concentrations of ammonium in groundwater in East Central Illinois. Ammonium has been detected at concentrations that are problematic to water treatment facilities (greater than 2.0 mg/L) in this region. Paleosols characterized for this study were of Quaternary age, specifically Robein Silt samples. Paleosol samples displayed significant capacity to both store and release ammonium through experiments measuring processes of sorption, ion exchange, and weathering. Bacteria and fungi within paleosols may significantly facilitate the leaching of ammonium into groundwater by the processes of assimilation and mineralization. Bacterial genetic material (DNA) was successfully extracted from the Robein Silt, purified, and amplified by polymerase chain reaction to produce 16S rRNA terminal restriction fragment length polymorphism (TRFLP) community analyses. The Robein Silt was found to have established diverse and viable bacterial communities. 16S rRNA TRFLP comparisons to well-known bacterial species yielded possible matches with facultative chemolithotrophs, cellulose consumers, nitrate reducers, and actinomycetes. It was concluded that the Robein Silt is both a source and reservoir for groundwater ammonium. Therefore, the occurrence of relatively large concentrations of ammonium in groundwater monitoring data may not necessarily be an indication of only anthropogenic contamination. The results of this study, however, need to be placed in a hydrological context to better understand whether paleosols can be a significant source of ammonium to drinking water supplies. ?? 2009 National Ground Water Association.

  7. Effects of High Ammonium Concentration on Growth and Nutrient Uptake of Lettuce Plants with Solution Culture

    Institute of Scientific and Technical Information of China (English)


    A nutrition solution experiment was conducted over two months to investigate the response of vegetable crops to high concentrations of ammonium, using lettuce (Lactuca sativa L. cv. Angustana Irish) as a test crop. Ammonium concentrations were designed in 5 levels, ranging from 12 mmol N L-1 to 22 mmol N L-1 and local tap water was used as water source. At the first culture stage (0-9 days), lettuce plants maintained normal growth while the lettuce roots were increasingly impaired. During the subsequent three stages the root structure was greatly damaged, and roots became brown or black through continuous supply of high concentration of ammonium. However, there was no obvious reduction of the aboveground biomass of the plants in the high ammonium treatments compared to those supplied with nitrate alone. In contrast to results obtained in another experiment from us with distilled water, the detrimental effect of high ammonium concentration on lettuce growth was greatly alleviated. Based on the results, it was postulated that the small amount of nitrate and the higher amount of bicarbonate existed in the tap water might mitigate the adverse effects of high ammonium N. The higher bicarbonate content in water and soil has usually been regarded as a major constraint factor limiting plant growth in calcareous soil areas. However, the reaction of bicarbonate to ammonium might produce positively interactive effect on reduction of both damages. The lettuce plants grown in ammonium solutions took up less P, K, Fe, Mn and Cu and more Ca than those grown in the nitrate nutrient solution. In conclusion, the results indicated that the N form imposed an obvious influence on absorption of cations and anions. Supplying ammonium-N stimulated transport of Ca, Mg and Mn to shoots of lettuce.

  8. Monthly variations in nitrogen isotopes of ammonium and nitrate in wet deposition at Guangzhou, south China (United States)

    Jia, Guodong; Chen, Fajin


    Monthly nitrogen isotopes of ammonium and nitrate in wet deposition in the city of Guangzhou, and the causes of their variability, are reported in this paper. Nitrate δ 15N showed nearly constant values around zero in the dry season (October to April), but oscillating values from negative to positive in the rainy season (May to September). By contrast, ammonium δ 15N displayed lower values during the rainy season than in the dry season. The rural area north of the city was considered as the prominent source of ammonium and nitrate in spring and early summer (May and June), as suggested by their concurrent negative isotopic trends and higher NH 4+/NO 3- ratios. From July to September, different dominating sources from the city, i.e., fossil fuel combustion for nitrate, and sewage and waste emission for ammonium, caused disparate δ 15N trends of the two species, showing positive nitrate δ 15N, but still negative ammonium δ 15N. During the cool dry season, the high values of ammonium δ 15N and concurrently low NH 4+/NO 3- ratios suggested the decrease in NH 3 volatilization and relatively important thermogenic origin of ammonium, but the intermediate nitrate δ 15N values around zero may be a result of a balanced emission of NO x from the city and the rural areas. The isotopic effects of chemical conversion of NO x to nitrate and washout of nitrate were ruled out as significant causes of nitrate δ 15N variability, but ammonium washout, during which 15N is assumed to be preferentially removed, may partly contribute to the ammonium δ 15N variability.

  9. Natural attenuation potential of tricholoroethene in wetland plant roots: role of native ammonium-oxidizing microorganisms. (United States)

    Qin, Ke; Struckhoff, Garrett C; Agrawal, Abinash; Shelley, Michael L; Dong, Hailiang


    Bench-scale microcosms with wetland plant roots were investigated to characterize the microbial contributions to contaminant degradation of trichloroethene (TCE) with ammonium. The batch system microcosms consisted of a known mass of wetland plant roots in aerobic growth media where the roots provided both an inoculum of root-associated ammonium-oxidizing microorganisms and a microbial habitat. Aqueous growth media, ammonium, and TCE were replaced weekly in batch microcosms while retaining roots and root-associated biomass. Molecular biology results indicated that ammonium-oxidizing bacteria (AOB) were enriched from wetland plant roots while analysis of contaminant and oxygen concentrations showed that those microorganisms can degrade TCE by aerobic cometabolism. Cometabolism of TCE, at 29 and 46 μg L(-1), was sustainable over the course of 9 weeks, with 20-30 mg L(-1) ammonium-N. However, at 69 μg L(-1) of TCE, ammonium oxidation and TCE cometabolism were completely deactivated in two weeks. This indicated that between 46 and 69 μg L(-1) TCE with 30 mg L(-1) ammonium-N there is a threshold [TCE] below which sustainable cometabolism can be maintained with ammonium as the primary substrate. However, cometabolism-induced microbial deactivation of ammonium oxidation and TCE degradation at 69 μg L(-1) TCE did not result in a lower abundance of the amoA gene in the microcosms, suggesting that the capacity to recover from TCE inhibition was still intact, given time and removal of stress. Our study indicates that microorganisms associated with wetland plant roots can assist in the natural attenuation of TCE in contaminated aquatic environments, such as urban or treatment wetlands, and wetlands impacted by industrial solvents.

  10. Thermochemical Properties and Decomposition Kinetics of Ammonium Magnesium Phosphate Monohydrate

    Institute of Scientific and Technical Information of China (English)

    WU,Jian; YUAN,Ai-Qun; HUANG,Zai-Yin; TONG,Zhang-Fa; CHEN,Jie; LIANG,Rong-Lan


    Ammonium magnesium phosphate monohydrate NH4MgPO4·H2O was prepared via solid state reaction at room temperature and characterized by XRD, FT-IR and SEM. Thermochemical study was performed by an isoperibol solution calorimeter, non-isothermal measurement was used in a multivariate non-linear regression analysis to determine the kinetic reaction parameters. The results show that the molar enthalpy of reaction above is (28.795±0.182) kJ/mol (298.15 K), and the standard molar enthalpy of formation of the title complex is (-2185.43±13.80)kJ/mol (298.15 K). Kinetics analysis shows that the second decomposition of NH4MgPO4·H2O acts as a double-step reaction: an nth-order reaction (Fn) with n=4.28, E1=147.35 kJ/mol, A1=3.63×1013 s-1 is followed by a second-order reaction (F2) with E2=212.71 kJ/mol, A2= 1.82×1018 s-1.

  11. Synthesis and characterization of ammonium phosphate fertilizers with boron

    Directory of Open Access Journals (Sweden)



    Full Text Available The concentration of boron, an essential micronutrient for plants, presents a narrow range between deficiency and toxicity. In order to provide the boron requirement for plants, and to avoid toxicity problems, boron compounds are mixed with basic fertilizers. Sodium borate pentahydrate was used as a boron source. Ammonium orthophosphates fertilizers with boron were prepared by neutralizing phosphoric acid with ammonia and addition of variable amounts of sodium tetraborate pentahydrate to the reaction mixture at a NH3:H3PO4 molar ratio of 1.5. The fertilizers obtained with boron contents ranging from 0.05 to 1 % (w/w were fully characterized by chemical analysis, thermal analysis, X-ray diffraction and infrared spectrophotometry. The studies showed that up to 500 °C, regardless of the boron content, no significant changes concerning thermal stability and nutritional properties occurred. Above 500 °C, an increase of thermal stability with an increase of the boron content was observed. X-Ray diffraction of a heat-treated sample containing 5 % (w/w boron indicated the appearance of boron orthophosphate, BPO4, as a new crystalline phase, and the disappearance of the previous structures above 500 °C, which explains the increase in thermal stability.

  12. Crystallization of Chicken Egg-White Lysozyme from Ammonium Sulfate (United States)

    Forsythe, Elizabeth L.; Snell, Edward H.; Pusey, Marc L.


    Chicken egg-white lysozyme was crystallized from ammonium sulfate over the pH range 4.0-7.8, with protein concentrations from 100 to 150 mg/ml. Crystals were obtained by vapor-diffusion or batch-crystallization methods. The protein crystallized in two morphologies with an apparent morphology dependence on temperature and protein concentration. In general, tetragonal crystals could be grown by lowering the protein concentration or temperature. Increasing the temperature or protein concentration resulted in the growth of orthorhombic crystals. Representative crystals of each morphology were selected for X-ray analysis. The tetragonal crystals belonged to the P4(sub 3)2(sub 1)2 space group with crystals grown at ph 4.4 having unit-cell dimensions of a = b = 78.7 1, c=38.6 A and diffracting to beyond 2.0 A. The orthorhombic crystals, grown at pH 4.8, were of space group P2(sub 1)2(sub 1)2 and had unit-cell dimensions of a = 30.51, b = 56.51 and c = 73.62 A.

  13. Interaction of ochratoxin A with quaternary ammonium beta-cyclodextrin. (United States)

    Poór, Miklós; Kunsági-Máté, Sándor; Szente, Lajos; Matisz, Gergely; Secenji, Györgyi; Czibulya, Zsuzsanna; Kőszegi, Tamás


    Ochratoxin A (OTA) is a widely spread nephrotoxic food contaminant mycotoxin. Unfortunately, attenuation or prevention of the toxic effects of OTA is still an unresolved problem. Molecular inclusion of OTA by cyclodextrins (CDs) results in complexes with low stability. In the human organism, OTA exists mostly in the dianionic state (OTA(2-)). Therefore, our major goal was to develop a chemically modified cyclodextrin which gives a more stable complex with OTA than the previously published derivatives and which shows stronger preference towards OTA(2-). In our fluorescence spectroscopic study we demonstrate that quaternary ammonium beta-cyclodextrin (QABCD) fulfils both of these requirements. The calculated stability constant of the QABCD-OTA(2-) complex was 28,840 M(-1) (about 200-fold higher than that of the β-CD-OTA(2-) complex). We hypothesize, that QABCD may be a suitable tool for the decontamination of different OTA-contaminated drinks; furthermore, for alleviation of the toxic effects of OTA, such complex formation may reduce its absorption from the intestine.

  14. Organomontmorillonites Modified with 2-Methacryloyloxy Ethyl Alkyl Dimethyl Ammonium Bromide

    Institute of Scientific and Technical Information of China (English)

    WANG Jian-quan; WU Wen-hui


    Organomontmorillonites (organo-MMT) were synthesized by means of montmorillonites (MMT) modified with a series of 2-methacryloyloxy ethyl alkyl dimethyl ammonium bromide (MAAB) having different alkyl chain lengths as cationic surfactants through a cationic exchanging reaction, and were characterized by FTIR, TG, elemental analysis, and XRD. The microenvironment of the organic interlayer such as the orientation and arrangement of the alkyl chains of MAAB, as well as the properties of nanocomposite hydrogels, were also investigated. The amount of organic components absorbed on interlayer and the basal spacing of organo-MMT both increase with the increasing of alkyl length of MAAB. When carbon number of alkyl chain is in the region of 8 to 14, the alkyl chains between layers would adopt a disordered gauche conformation; while the carbon number is 16, an ordered all-trans conformation with a vertical orientation would be found together with the disordered gauche conformation according to the results of XRD and FTIR. Due to the difference of microenvironment of organic interlayer, the Young's moduli of the nanocomposite hydrogels increased as the alkyl chains of MAAB became longer.

  15. Synthesis, Characterization and Thermal Decomposition Mechanism of Cetyltrimethyl Ammonium Tetrathiotungstate

    Institute of Scientific and Technical Information of China (English)

    Gaojun An; Yunqi Liu; Yongming Chai; Hongyan Shang; Chenguang Liu


    The synthesis, characterization and thermal decomposition mechanism of cetyltrimethyl ammonium tetrathiotungstate (CTriMATT) were studied herein. The as-synthesized CTriMATT was characterized by Elemental analysis, X-ray diffraction (XRD), Fourier transform infrared (FT-IR), Ultraviolet visible (UV-Vis) spectra. The results showed that the as-synthesized CTriMATT had high purity and good crystallinity. The introduction of alkyl groups induced a shift of the stretching vibration band of W-S bond to lower wavenumber, while it had no influence on the position of WS2-4. Thermogravimetric analysis (TG), differential thermal analysis (DTA) and in situ XRD characterizations revealed that CTriMATT began to decompose at 423 K in nitrogen and was converted to WS2 eventually. In addition,the decomposition product of CTriMATT at 673 K in nitrogen was characterized by N2 adsorption (BET)and scanning electron microscopy (SEM). The results demonstrated that WS2 with higher specific surface area, and pore volume could be obtained from the thermal decomposition of CTriMATT in nitrogen.

  16. Betaines and related ammonium compounds in chestnut (Castanea sativa Mill.). (United States)

    Servillo, Luigi; Giovane, Alfonso; Casale, Rosario; Balestrieri, Maria Luisa; Cautela, Domenico; Paolucci, Marina; Siano, Francesco; Volpe, Maria Grazia; Castaldo, Domenico


    Chestnut fruits, being poor of simple sugars and consisting mainly of fibers and starch, are among the constituents of Mediterranean diet. While numerous studies report on content of proteins and amino acids in chestnut, no one has appeared so far on betaines, an important class of nitrogen compounds ubiquitous in plants for their protective action in response to abiotic stress. In this study, we analyzed by HPLC-ESI-tandem mass spectrometry, in fruits and flours of varieties of chestnut cultivated in Italy, the composition of betaines and ammonium compounds intermediates of their biosynthesis. Besides the parent amino acids, the compounds quantified were choline, glycerophosphocholine, phosphocholine, glycine betaine, N-methylproline, proline betaine (stachydrine), β-alanine betaine, 4-guanidinobutyric acid, trigonelline, N,N,N-trimethyllysine. Interestingly, some uncommon derivatives of pipecolic acid, such as N-methylpipecolic acid, 4-hydroxypipecolic acid and 4-hydroxy-N-methylpipecolic acid were identified for the first time in chestnut samples and characterized by MS(n) tandem mass spectrometry.

  17. Antibacterial Activity of Dental Cements Containing Quaternary Ammonium Polyethylenimine Nanoparticles

    Directory of Open Access Journals (Sweden)

    Nurit Beyth


    Full Text Available Glass ionomer cements (GICs are commonly used for cementing full cast crown restorations. Regrettably, although the dental cements fill the gap between the tooth and the crown, bacterial microleakage may occur, resulting in secondary caries. As microleakage cannot be completely prevented, GICs possessing antibacterial properties are in demand. In the present study the antibacterial activity of insoluble, cross-linked quaternary ammonium polyethylenimine (QPEI nanoparticles incorporated at 1% w/w in two clinically available GICs were studied. The antibacterial activity was tested against Streptococcus mutans and Lactobacillus casei using the direct contact test (DCT and the agar diffusion test (ADT. Using the direct contact test, antibacterial activity (<0.05 was found in both tested GICs with incorporated QPEI nanoparticles, the effect lasting for at least one month. However, the ADT showed no inhibition halo in the test bacteria, indicating that the antimicrobial nanoparticles do not diffuse into the agar. The results show that the incorporation of QPEI nanoparticles in glass ionomer cements has a long-lasting antibacterial effect against Streptococcus mutans and Lactobacillus casei. Changing the antibacterial properties of glass ionomer cements by incorporating QPEI antibacterial nanoparticles may prolong the clinical performance of dental crowns.

  18. The Structure of Ammonium D,L-Tartrate

    Institute of Scientific and Technical Information of China (English)


    The single crystals of the title compound NH4+C4H5O6- (C4H9NO6, Mr = 167.1) were obtained from a hot aqueous solution containing L-glutamine and D,L-tartaric acid in mole ratio1:1.5. The crystal belongs to monoclinic space group P21/c with a = 7.646(2), b = 7.804(2), c = 11.502(3)?, β = 102.26(2)o, V = 670.7(3)?3, Z = 4, F(000) = 352, Dc = 1.655, ((MoK() = 0.16 mm-1, R = 0.035, wR = 0.094 for 1028 observed reflections (I>2((I)). The enatiomeric anions of the tartrate with both (2S,3S)- and (2R,3R)-configuration co-exist in the unit cell. The carbon skeleton assumes a coplanar arrangement with a torsion angle of 181.5o. The three- dimensional H-bonding network exists in the crystal. While tartrate groups link each other by H-bonds between carboxyl and hydroxyl groups, the ammonium cations insert between the tartrate groups to form a sandwich-like crystal structure.

  19. The Growth Effect of Enhanced Ammonium Nutrition on Maize

    Institute of Scientific and Technical Information of China (English)


    The two maize varieties,Yuanzheng-808(astrictive type) and Sidan-19(explanate type),were cultured in pots.There were six treatments which the proportion of NO3--N and NH4+-N were 1∶0 (treatment 1),2∶1(treatment 2),1∶1(treatment 3),1∶2(treatment 4),0∶1(treatment 5) and CK(no nitrogen) respectively.After emergence of seedings,the samples were picked up per 20 days in the growth period and measured chlorophyll contents,nitrate reductase(NR) activity,the weight of dry matter and single plant seed yield respectively.The result showed that enhanced ammonium nutrition (EAN) may increase chlorophyll content,dry matter weight and single plant seed yield.But there was a difference between varieties.To Yuanzheng-808,treatment 2 was the highest yield in all treatments;but treatment 4 was the highest yield to Sidan-19.

  20. Photoluminescence from silicon nanoparticles embedded in ammonium silicon hexafluoride

    Energy Technology Data Exchange (ETDEWEB)

    Kalem, Seref [UEKAE, National Research Institute of Electronics and Cryptology, Gebze 41470 Kocaeli (Turkey); Werner, Peter; Becker, Michael; Zakharov, Nikolai [Department of Experimental Physics, Max-Planck-Institute, Halle(Saale) (Germany); Talalaev, Vadim [ZIK ' SiLi-nano' , Martin-Luther-Universitaet (Halle), Karl-Freiherr-von-Fritsch-Strasse 3 D-06120 Halle (Germany); Arthursson, Oerjan, E-mail: [Microtechnology and Nanosciences Department, Chalmers University of Technology, Goeteborg (Sweden)


    Silicon (Si) nanoparticles (NPs) were synthesized by transforming a Si wafer surface to ammonium silicon hexafluoride (ASH) or (NH{sub 4}){sub 2}SiF{sub 6} under acid vapor treatment. Si-NPs which were found to be embedded within the polycrystalline (ASH) layer exhibit a strong green-orange photoluminescence (PL). Differential PL measurements revealed a major double component spectrum consisting of a broad band associated with the ASH-Si wafer interfacial porous oxide layer and a high energy band attributable to Si-NPs embedded in the ASH. The origin of the latter emission can be explained in terms of quantum/spatial confinement effects probably mediated by oxygen related defects in or around Si-NPs. Although Si-NPs are derived from the interface they are much smaller in size than those embedded within the interfacial porous oxide layer (SiO{sub x}, x > 1.5). Transmission electron microscopy (TEM) combined with Raman scattering and Fourier transformed infrared (FTIR) analysis confirmed the presence of Si-NP and Si-O bondings pointing to the role of oxygen related defects in a porous/amorphous structure. The presence of oxygen of up to 4.5 at.% in the (NH{sub 4}){sub 2}SiF{sub 6} layer was confirmed by energy dispersive spectroscopy (EDS) analysis.

  1. Ammonium reduces chromium toxicity in the freshwater alga Chlorella vulgaris. (United States)

    Liu, Jingqing; Sun, Zhengqi; Lavoie, Michel; Fan, Xiaoji; Bai, Xiaocui; Qian, Haifeng


    The aim of the present study was to investigate the protective effect of ammonium (NH4 (+)) on Cr toxicity to the freshwater alga Chlorella vulgaris. We followed an array of cellular functions and biomolecules in C. vulgaris cells exposed to 50 or 100 μM Cr at three different initial NH4 (+) concentrations (0.5, 3, and 10 mM). The results showed that Cr strongly inhibited cell yield of C. vulgaris, but 10 mM NH4 (+) could decrease by more than two-fold Cr toxicity on cell yield compared to exposure to 0.5 mM NH4 (+). Cr toxicity on gene transcripts and cellular substructure was also much lower at high than at low NH4 (+). Our results suggest that this protecting effect of NH4 (+) on intracellular Cr toxicity could be due to several factors, such as enhance uptake of phosphorus, increase in C and N assimilation efficiency, and increase transcription of photosynthesis-related genes.

  2. Volatile Corrosion Inhibitors Part III- Ammonium stearate and M-Dinitrobenezene

    Directory of Open Access Journals (Sweden)

    K. S. Rajagopalan


    Full Text Available In earlier studies while screening various chemical compound for their vapour phase inhibiting properties. Some ammonium salts and nitro-compounds had shown promising results. Of these, ammonium stearate and m-dinitrobenzene gave the best results in accelerated short term tests. In the present paper a more detailed investigation on the corrosion protection given by them has been made.Ammonium stearate and m-dinitrobenzene, both, have been found to perform satisfactorily under all test conditions except SOsub2 test where m-dinitrobenzene failed. Their indigenous availability, low cost and good corrosion inhibiting properties demands favorable consideration for their adoption as VCIs for general use.

  3. Molecular characterization, function and regulation of ammonium transporters (Amt) and ammonium-metabolizing enzymes (GS, NADP-GDH) in the ectomycorrhizal fungus Hebeloma cylindrosporum. (United States)

    Javelle, Arnaud; Morel, Mélanie; Rodríguez-Pastrana, Blanca-Rosa; Botton, Bernard; André, Bruno; Marini, Anne-Marie; Brun, Annick; Chalot, Michel


    External hyphae, which play a key role in nitrogen nutrition of trees, are considered as the absorbing structures of the ectomycorrhizal symbiosis. Here, we have cloned and characterized Hebeloma cylindrosporum AMT1, GLNA and GDHA genes, which encode a third ammonium transporter, a glutamine synthetase and an NADP-dependent glutamate dehydrogenase respectively. Amt1 can fully restore the pseudohyphal growth defect of a Saccharomyces cerevisiae mep2 mutant, and this is the first evidence that a heterologous member of the Mep/Amt family complements this dimorphic change defect. Dixon plots of the inhibition of methylamine uptake by ammonium indicate that Amt1 has a much higher affinity than the two previously characterized members (Amt2 and Amt3) of the Amt/Mep family in H. cylindrosporum. We also identified the intracellular nitrogen pool(s) responsible for the modulation of expression of AMT1, AMT2, AMT3, GDHA and GLNA. In response to exogenously supplied ammonium or glutamine, AMT1, AMT2 and GDHA were downregulated and, therefore, these genes are subjected to nitrogen repression in H. cylindrosporum. Exogenously supplied nitrate failed to induce a downregulation of the five mRNAs after transfer of mycelia from a N-starved condition. Our results demonstrate that glutamine is the main effector for AMT1 and AMT2 repression, whereas GDHA repression is controlled by intracellular ammonium, independently of the intracellular glutamine or glutamate concentration. Ammonium transport activity may be controlled by intracellular NH4+. AMT3 and GLNA are highly expressed but not highly regulated. A model for ammonium assimilation in H. cylindrosporum is presented.

  4. Purification of IgG from serum with caprylic acid and ammonium sulphate precipitation is not superior to ammonium sulphate precipitation alone. (United States)

    Mohanty, J G; Elazhary, Y


    Immunoglobulin G (IgG) from bovine serum raised against Aeromonas Salmonicida was purified by ammonium sulphate precipitation (ASP) or caprylic acid treatment followed by ammonium sulphate precipitation (CAAS). Purity of IgG samples prepared by both methods were examined by High Performance Gel Permeation Chromatography, electrophoresis and antibody activity assay. Results suggest that IgG prepared by ASP is better than that obtained by CAAS method in terms of the yield of the IgG monomers and the recovery of the antibody activity.

  5. Interface Engineering of Metal Oxides using Ammonium Anthracene in Inverted Organic Solar Cells. (United States)

    Jeon, Il; Zeljkovic, Sasa; Kondo, Kei; Yoshizawa, Michito; Matsuo, Yutaka


    In this work, by casting water-soluble ammonium anthracene on metal oxides, the organic surface modifier re-engineered the interface of the metal oxide to improve charge transport. The energy level of ammonium anthracene increased the work function of indium tin oxide (ITO), functioning as a hole-blocker (electron-transporter). Solar cells in which ITO was treated by the ammonium anthracene produced an average power conversion efficiency (PCE) of 5.8% without ZnO, the electron-transporting layer. When the ammonium anthracene was applied to ZnO, an average PCE of 8.1% was achieved, which is higher than the average PCE of 7.5% for nontreated ZnO-based devices.

  6. Synthesis and Characterization of Ammonium-, Pyridinium-, and Pyrrolidinium-Based Sulfonamido Functionalized Ionic Liquids

    DEFF Research Database (Denmark)

    Shunmugavel, Saravanamurugan; Fehrmann, Rasmus; Riisager, Anders


    New homologous ammonium-, pyridinium-, and pyrrolidinium-based sulfonamido functionalized ionic liquids have been synthesized in two steps using monoethanolamine, methanesulfonyl chloride, and tosyl chloride as precursors with ethanol as solvent. Attempts to synthesize dual amino functionalized...

  7. Anatase-brookite mixed phase nano TiO2 catalyzed homolytic decomposition of ammonium nitrate. (United States)

    Vargeese, Anuj A; Muralidharan, Krishnamurthi


    Compared to the conventional ammonium perchlorate based solid rocket propellants, burning of ammonium nitrate (AN) based propellants produce environmentally innocuous combustion gases. Application of AN as propellant oxidizer is restricted due to low reactivity and low energetics besides its near room temperature polymorphic phase transition. In the present study, anatase-brookite mixed phase TiO(2) nanoparticles (~ 10 nm) are synthesized and used as catalyst to enhance the reactivity of the environmental friendly propellant oxidizer ammonium nitrate. The activation energy required for the decomposition reactions, computed by differential and non-linear integral isoconversional methods are used to establish the catalytic activity. Presumably, the removal of NH(3) and H(2)O, known inhibitors of ammonium nitrate decomposition reaction, due to the surface reactions on active surface of TiO(2) changes the decomposition pathway and thereby the reactivity.

  8. A phenomenological model for improving understanding of the ammonium nitrate agglomeration process

    Directory of Open Access Journals (Sweden)

    Videla Leiva Alvaro


    Full Text Available Ammonium nitrate is intensively used as explosive in the mining industry as the main component of ANFO. The ammonium nitrate is known to be a strong hygroscopic crystal matter which generates problems due to the creation of water bridges between crystals leading later to nucleation and crystallization forming an agglomerated solid cake. The agglomeration process damages the ammonium nitrate performance and is undesirable. Usually either organic or inorganic coatings are used to control agglomeration. In the present work a characterization method of humidity adsorption of the ammonium nitrate crystal was performed under laboratory conditions. Several samples were exposed into a defined humidity in a controlled chamber during 5 hours after which the samples were tested to measure agglomeration as the resistance force to compression. A clear relation was found between coating protection level, humidity and agglomeration. Agglomeration can be then predicted by a phenomenological model based of combination of the mono-layer BET adsorption and CNT nucleation models.

  9. Ammonium and nitrite oxidation at nanomolar oxygen concentrations in oxygen minimum zone waters. (United States)

    Bristow, Laura A; Dalsgaard, Tage; Tiano, Laura; Mills, Daniel B; Bertagnolli, Anthony D; Wright, Jody J; Hallam, Steven J; Ulloa, Osvaldo; Canfield, Donald E; Revsbech, Niels Peter; Thamdrup, Bo


    A major percentage of fixed nitrogen (N) loss in the oceans occurs within nitrite-rich oxygen minimum zones (OMZs) via denitrification and anammox. It remains unclear to what extent ammonium and nitrite oxidation co-occur, either supplying or competing for substrates involved in nitrogen loss in the OMZ core. Assessment of the oxygen (O2) sensitivity of these processes down to the O2 concentrations present in the OMZ core (Michaelis-Menten model, indicating a high-affinity component with a Km of just a few nanomolar. As the communities of ammonium and nitrite oxidizers were similar to other OMZs, these kinetics should apply across OMZ systems. The high O2 affinities imply that ammonium and nitrite oxidation can occur within the OMZ core whenever O2 is supplied, for example, by episodic intrusions. These processes therefore compete with anammox and denitrification for ammonium and nitrite, thereby exerting an important control over nitrogen loss.

  10. Heterotrophic ammonium removal characteristics of an aerobic heterotrophic nitrifying-denitrifying bacterium, Providencia rettgeri YL

    Institute of Scientific and Technical Information of China (English)

    TAYLOR Shauna M; HE Yiliang; ZHAO Bin; HUANG Jue


    Bacterium Providencia rettgeri YL was found to exhibit an unusual ability to heterotrophically nitrify and aerobically denitrify various concentrations of ammonium (NH4+-N). In order to further analyze its removal ability, several experiments were conducted to identify the growth and ammonium removal response in different carbon to nitrogen (C/N) mass ratios, shaking speeds, temperatures, ammonium concentrations and to qualitatively verify the production of nitrogen gas using gas chromatography techniques. Results showed that under optimum conditions (C/N 10, 30℃, 120 r/min), YL can significantly remove low and high concentrations of ammonium within 12 to 48 h of growth. The nitrification products hydroxylamine (NH2OH), nitrite (NO2-) and nitrate (NO3-) as well as the denitrification product, nitrogen gas (N2), were detected under completely aerobic conditions.

  11. Evaluation of chitosan quaternary ammonium salt-modified resin denture base material. (United States)

    Song, Rong; Zhong, Zhaohua; Lin, Lexun


    Chitosan quaternary ammonium salt displays good antioxidant and antibacterial characteristics and it shows appreciable solubility in water. When added to the traditional denture material to form a resin base, it could promote good oral health by improving the oral environment. In this study, chitosan quaternary ammonium salt was added to the denture material following two different methods. After three months of immersion in artificial saliva, the specimens were tested for tensile strength and were scanned by electron microscope. The murine fibroblast cytotoxicity and antibacterial properties were also tested. The result showed no significant differences in the tensile strength and in the proliferation of murine L929 fibroblast cells. The two structures of chitosan quaternary ammonium salt-modified denture material had different degrees of corrosion resistance and antimicrobial properties. These results indicate that chitosan quaternary ammonium salt-modified resin denture base material has the potential to become a new generation oral denture composite material.

  12. Determination of ammonium in a buddingtonite sample by ion-chromatography (United States)

    Klock, P.R.; Lamothe, P.J.


    An ion-chromatographic method for the direct determination of ammonium, potassium, and sodium in geologic materials is described. Samples are decomposed with a mixture of hydrofluoric and hydrochloric acids in a sealed polycarbonate bottle heated in a microwave oven. The ion-chromatograph separates the cations and determines them by conductivity measurement. The ammonium concentrations thus determined have been verified by use of an ammonia-specific electrode. A total of 32 analyses of ammonium salts by both techniques showed an average error of -4%, with a relative standard deviation (RSD) of 6%. The ammonium concentrations found in a buddingtonite sample had an RSD of 2.2% and their mean agreed with that obtained by the Kjeldahl method. By use of the prescribed dilution of the sample, detection limits of 0.1% can be achieved for all three cations. ?? 1986.

  13. Combined anaerobic ammonium and methane oxidation for nitrogen and methane removal. (United States)

    Zhu, Baoli; Sánchez, Jaime; van Alen, Theo A; Sanabria, Janeth; Jetten, Mike S M; Ettwig, Katharina F; Kartal, Boran


    Anammox (anaerobic ammonium oxidation) is an environment-friendly and cost-efficient nitrogen-removal process currently applied to high-ammonium-loaded wastewaters such as anaerobic digester effluents. In these wastewaters, dissolved methane is also present and should be removed to prevent greenhouse gas emissions into the environment. Potentially, another recently discovered microbial pathway, n-damo (nitrite-dependent anaerobic methane oxidation) could be used for this purpose. In the present paper, we explore the feasibility of simultaneously removing methane and ammonium anaerobically, starting with granules from a full-scale anammox bioreactor. We describe the development of a co-culture of anammox and n-damo bacteria using a medium containing methane, ammonium and nitrite. The results are discussed in the context of other recent studies on the application of anaerobic methane- and ammonia-oxidizing bacteria for wastewater treatment.

  14. Effects of quaternary ammonium silane coatings on mixed fungal and bacterial biofilms on tracheoesophageal shunt prostheses

    NARCIS (Netherlands)

    Oosterhof, JJH; Buijssen, KJDA; Busscher, HJ; van der Laan, BFAM; van der Mei, HC


    Two quaternary ammonium silanes (QAS) were used to coat silicone rubber tracheoesophageal shunt prostheses, yielding a positively charged surface. One QAS coating [(trimethoxysilyl)-propyidimethylocta-decylammonium chloride] was applied through chemical bonding, while the other coating, Biocidal ZF,

  15. Enantioselective [4 + 1] Annulation Reactions of α-Substituted Ammonium Ylides To Construct Spirocyclic Oxindoles. (United States)

    Zheng, Peng-Fei; Ouyang, Qin; Niu, Sheng-Li; Shuai, Li; Yuan, Yi; Jiang, Kun; Liu, Tian-Yu; Chen, Ying-Chun


    Ammonium ylides have a long history in organic synthesis, but their application in asymmetric catalysis is still underdeveloped in regard to both substrate scope and reaction pathways compared with phosphorus and sulfur ylides. Here a previously unreported asymmetric [4 + 1] annulation reaction of 3-bromooxindoles and electron-deficient 1-azadienes has been developed through ammonium ylide catalysis of a newly designed 2'-methyl α-isocupreine (α-MeIC), efficiently delivering spirocyclic oxindole compounds incorporating a dihydropyrrole motif in excellent enantioselectivity (up to 99% ee). To the best of our knowledge, this work represents the first example of asymmetric catalysis of ammonium ylides bearing α-substitutions, and the catalytic [4 + 1] annulation pathway of ammonium ylides is also unprecedented. Moreover, (1)H NMR, mass spectroscopy, and computational calculation studies were conducted, and the catalytic cycle and a tentative explanation of the enantioselective mechanism have been successfully elucidated.

  16. Nitrogen loss by anaerobic ammonium oxidation in unconfined aquifer soils (United States)

    Wang, Shanyun; Radny, Dirk; Huang, Shuangbing; Zhuang, Linjie; Zhao, Siyan; Berg, Michael; Jetten, Mike S. M.; Zhu, Guibing


    Anaerobic ammonium oxidation (anammox) is recognized as an important process for nitrogen cycling, yet little is known about its role in the subsurface biosphere. In this study, we investigated the presence, abundance, and role of anammox bacteria in upland soil cores from Tianjin, China (20 m depth) and Basel, Switzerland (10 m depth), using isotope-tracing techniques, (q)PCR assays, and 16 S rRNA & hzsB gene clone libraries, along with nutrient profiles of soil core samples. Anammox in the phreatic (water-saturated) zone contributed to 37.5–67.6% of the N-loss (up to 0.675 gN m−2 d−1), with anammox activities of 0.005–0.74 nmolN g−1 soil h−1, which were even higher than the denitrification rates. By contrast, no significant anammox was measured in the vadose zone. Higher anammox bacterial cell densities were observed (0.75–1.4 × 107 copies g−1 soil) in the phreatic zone, where ammonia-oxidizing bacteria (AOB) maybe the major source of nitrite for anammox bacteria. The anammox bacterial cells in soils of the vadose zone were all <103 copies g−1 soil. We suggest that the subsurface provides a favorable niche for anammox bacteria whose contribution to N cycling and groundwater nitrate removal seems considerably larger than previously known. PMID:28071702

  17. Nitrogen loss by anaerobic ammonium oxidation in unconfined aquifer soils (United States)

    Wang, Shanyun; Radny, Dirk; Huang, Shuangbing; Zhuang, Linjie; Zhao, Siyan; Berg, Michael; Jetten, Mike S. M.; Zhu, Guibing


    Anaerobic ammonium oxidation (anammox) is recognized as an important process for nitrogen cycling, yet little is known about its role in the subsurface biosphere. In this study, we investigated the presence, abundance, and role of anammox bacteria in upland soil cores from Tianjin, China (20 m depth) and Basel, Switzerland (10 m depth), using isotope-tracing techniques, (q)PCR assays, and 16 S rRNA & hzsB gene clone libraries, along with nutrient profiles of soil core samples. Anammox in the phreatic (water-saturated) zone contributed to 37.5–67.6% of the N-loss (up to 0.675 gN m‑2 d‑1), with anammox activities of 0.005–0.74 nmolN g‑1 soil h‑1, which were even higher than the denitrification rates. By contrast, no significant anammox was measured in the vadose zone. Higher anammox bacterial cell densities were observed (0.75–1.4 × 107 copies g‑1 soil) in the phreatic zone, where ammonia-oxidizing bacteria (AOB) maybe the major source of nitrite for anammox bacteria. The anammox bacterial cells in soils of the vadose zone were all <103 copies g‑1 soil. We suggest that the subsurface provides a favorable niche for anammox bacteria whose contribution to N cycling and groundwater nitrate removal seems considerably larger than previously known.

  18. Synthesis of Main-Chain Chiral Quaternary Ammonium Polymers for Asymmetric Catalysis Using Quaternization Polymerization

    Directory of Open Access Journals (Sweden)

    Md. Masud Parvez


    Full Text Available Main-chain chiral quaternary ammonium polymers were successfully synthesized by the quaternization polymerization of cinchonidine dimer with dihalides. The polymerization occurred smoothly under optimized conditions to give novel type of main-chain chiral quaternary ammonium polymers. The catalytic activity of the polymeric chiral organocatalysts was investigated on the asymmetric benzylation of N-(diphenylmethylideneglycine tert-butyl ester.

  19. Phosphate limitation in biological rapid sand filters used to remove ammonium from drinking water

    DEFF Research Database (Denmark)

    Lee, Carson Odell; Albrechtsen, Hans-Jørgen; Smets, Barth F.;


    Removing ammonium from drinking water is important for maintaining biological stability in distribution systems. This is especially important in regions that do not use disinfectants in the treatment process or keep a disinfectant residual in the distribution system. Problems with nitrification c...... the total number of ammonium oxidizing bacteria in the column. © 2013 American Water Works Association AWWA WQTC Conference Proceedings All Rights Reserved....

  20. Synthesis and applications of novel bis(ammonium) chiral ionic liquids derived from isomannide

    DEFF Research Database (Denmark)

    Kumar, Vineet; Olsen, Carl Erik; Schäffer, Susan J.;


    Carbohydrate-based novel bis(ammonium) chiral ionic liquids have been synthesized by following a straightforward protocol using isomannide as the substrate. Their applications in chiral discrimination and optical resolution of racemates have been established.......Carbohydrate-based novel bis(ammonium) chiral ionic liquids have been synthesized by following a straightforward protocol using isomannide as the substrate. Their applications in chiral discrimination and optical resolution of racemates have been established....

  1. Removal of ammonium from aqueous solutions using alkali-modified biochars

    Directory of Open Access Journals (Sweden)

    Zhigang Liu


    Full Text Available Biochars converted from agricultural residuals can effectively remove ammonium from water. This work further improved the sorption ability of biochars to aqueous ammonium through alkali modification. Three modified biochars were prepared from agricultural residuals pre-treated with NaOH solution through low-temperature (300 °C slow pyrolysis. The modified biochars effectively removed ammonium ions from water under various conditions with relatively fast adsorption kinetics (reached equilibrium within 10 h and extremely high adsorption capacity (>200 mg/g. The Langmuir maximum capacity of the three modified biochars were between 313.9 and 518.9 mg/g, higher than many other ammonium adsorbents. Although the sorption of ammonium onto the modified biochar was affected by pH and temperature, it was high under all of the tested conditions. Findings from this work indicated that alkali-modified biochars can be used as an alternative adsorbent for the removal of ammonium from wastewater.

  2. Simultaneous removal of ammonium and nitrate by HDTMA-modified zeolite. (United States)

    Tao, Quan; Hu, Mu; Ma, Xiaofang; Xiang, Mingli; Zhang, Tian C; Li, Chengle; Yao, Jing; Liang, Ying


    In this study, surfactant (hexadecyltrimethylammonium, HDTMA) modified zeolite (clinoptilolite) (SMZ) was used for simultaneous removal of ammonium and nitrate in wastewater, and the sorption properties of SMZ were determined. Results showed that natural clinoptilolite had good affinity for ammonium, but low sorption ability for nitrate, and the ammonium sorption process was well described by the pseudo-second order kinetic model. The SMZ had a significant enhancement on nitrate sorption and could simultaneously remove ammonium and nitrate at specific conditions, with removal efficiency up to 93.6% and 81.8%, respectively. The sorption process fitted well with the Langmuir isotherm. Orthogonal experiments showed that ammonium concentration was the most important factor for ammonium sorption on SMZ. However, surfactant loading was the major factor for nitrate sorption. Meanwhile, phosphate did not interfere with nitrate removal. Semi-empirical quantum mechanics molecular simulation indicated that electrostatic attraction existed between HDTMA and nitrate. Results of this study demonstrated that SMZs may have great potential for removing cations and anions simultaneously in the aquatic environment.

  3. Depositional ice nucleation on solid ammonium sulfate and glutaric acid particles

    Directory of Open Access Journals (Sweden)

    K. J. Baustian


    Full Text Available Heterogeneous ice nucleation on solid ammonium sulfate and glutaric acid particles was studied using optical microscopy and Raman spectroscopy. Optical microscopy was used to detect selective nucleation events as water vapor was slowly introduced into an environmental sample cell. Particles that nucleated ice were dried via sublimation and examined in detail using Raman spectroscopy. Depositional ice nucleation is highly selective and occurred preferentially on just a few ammonium sulfate and glutaric acid particles in each sample. For freezing temperatures between 214 K and 235 K an average ice saturation ratio of S = 1.10±0.07 for solid ammonium sulfate was observed. Over the same temperature range, S values observed for ice nucleation on glutaric acid particles increased from 1.2 at 235 K to 1.6 at 218 K. Experiments with externally mixed particles further show that ammonium sulfate is a more potent ice nucleus than glutaric acid. Our results suggest that heterogeneous nucleation on ammonium sulfate may be an important pathway for atmospheric ice nucleation and cirrus cloud formation when solid ammonium sulfate aerosol particles are available for ice formation. This pathway for ice formation may be particularly significant near the tropical tropopause region where sulfates are abundant and other species known to be good ice nuclei are depleted.

  4. Application of Neesler reagent in the ammonium quantification used in the fermentations of biotechnology products

    Directory of Open Access Journals (Sweden)

    Dinorah Torres-Idavoy


    Full Text Available The ammonium salts are used in fermentations to supplement the deficient amounts of nitrogen and stabilize the pH of the culture medium. The excess ammonium ion exerts a detrimental effect on the fermentation process inhibiting microbial growth. An analytical method based on Neesler reagent was developed for monitoring and controlling the concentration of ammonium during the fermentation process. The test was standardized, by means of the selection of measuring equipment, and the reaction time as well as comparing standards of ammonium salts. The method was characterized with the evaluation of the next parameters: Specificity, Linearity and Range, Quantification Limit, Accuracy and Precision. The method proved to be specific. Two linear curves were defined in the ranges of concentrations of ammonium chloride salt (2-20 μg/ml and ammonium sulfate salt (5-30 μg/ml. The limits of quantification were the lowest points of each one. The method proved to be accurate and precise. This assay was applied to samples of the yeast culture and bacteria of the genus Saccharomyces and E. coli respectively. A novel method in micro plate for quantification and analytical control of ammonia was developed. This method is used to control this fundamental chemical component in the fermentations, to optimize the culture medium. Thus, an appropriate expression of recombinant proteins and proper vaccine candidates for clinical use are achieved

  5. Removal of ammonium ion from aqueous solution using natural Turkish clinoptilolite

    Energy Technology Data Exchange (ETDEWEB)

    Karadag, Dogan [Yildiz Technical University, Civil Engineering Faculty, Environmental Engineering Department, 34349 Besiktas, Istanbul (Turkey)]. E-mail:; Koc, Yunus [Yildiz Technical University, Civil Engineering Faculty, Environmental Engineering Department, 34349 Besiktas, Istanbul (Turkey); Turan, Mustafa [Istanbul Technical University, Civil Engineering Faculty, Environmental Engineering Department, 34469 Maslak, Istanbul (Turkey); Armagan, Bulent [Harran University, Engineering Faculty, Environmental Engineering Department, 63300 Sanliurfa (Turkey)


    A study on ion exchange kinetics and equilibrium isotherms of ammonium ion on natural Turkish clinoptilolite (zeolite) was conducted using a batch experiment technique. The effects of relevant parameters, such as temperature, contact time and initial ammonium (NH{sub 4} {sup +}) concentration were examined, respectively. The pseudo first-order, pseudo second-order kinetic models and intraparticle diffusion model were used to describe the kinetic data. The pseudo second-order kinetic model provided excellent kinetic data fitting (R {sup 2} > 0.990) and intraparticle diffusion effects ammonium uptake. The Langmuir and Freundlich models were applied to describe the equilibrium isotherms for ammonium uptake and the Langmuir model agrees very well with experimental data. Thermodynamic parameters such as change in free energy ({delta}G {sup 0}), enthalpy ({delta}H {sup 0}) and entropy ({delta}S {sup 0}) were also determined. An examination of the thermodynamic parameters shows that the exchange of ammonium ion by clinoptilolite is a process occurring spontaneously and physical in nature at ambient conditions (25 deg. C). The process is also found to be exothermic. The results indicate that there is a significant potential for the natural Turkish clinoptilolite as an adsorbent material for ammonium removal from aqueous solutions.

  6. Floc flotation of jamesonite fines in aqueous suspensions induced by ammonium dibutyl dithiophosphate

    Institute of Scientific and Technical Information of China (English)

    张婷; 覃文庆


    The hydrophobic flocculation of jamesonite fines in aqueous suspensions induced by ammonium dibutyl dithiophosphate was investigated using laser particle size analysis, microscope analysis, electrophoretic light scattering and infrared spectroscopy. Single minerals of 4.607 µm for the 50% volumetric diameters were researched by varying several parameters, including pH, ammonium dibutyl dithiophosphate concentration, stirring strength and kerosene addition. It is found that the maximal floatability of jamesonite fines is induced by ammonium dibutyl dithiophosphate at pH 6, and the floc flotation increases with increasing ammonium dibutyl dithiophosphate concentration despite a simultaneous increase in the negativeζpotential of jamesonite, meaning that hydrophobic interaction between the particles increases much more strongly than electric double layer repulsion from the adsorption of ammonium dibutyl dithiophosphate. It is also found that the floc flotation is closely correlated with the size of flocs, which is strongly influenced by the stirring strength and enhanced by the addition of a small amount of kerosene. The results of FTIR spectra indicate that adsorption of ammonium dibutyl dithiophosphate onto jamesonite is chemical adsorption and the adsorption product is lead dibutyl dithiophosphate.

  7. UA-SPE-HPLC快速分离法测定乳饮料中的硫氰酸钠的研究%Ultrasonic-assisted Solid Phase Extraction for Separation and Determination of Sodium Thiocyanate in Dairy Beverage by High Performance Liquid Chromatography

    Institute of Scientific and Technical Information of China (English)

    张丽媛; 姚笛; 贾鹏宇; 王颖; 李秀波


    建立超声辅助萃取-固相净化-高效液相色谱法测定乳饮料中硫氰酸钠的方法,重点研究了乳饮料的样品前处理方法,采用乙腈加三氯乙酸作为蛋白沉淀剂,有效实现对各类乳饮料的样品中蛋白质的沉淀和硫氰酸钠的提取。方法在0.05~50 mg·kg-1具有良好的线性关系,硫氰酸钠的日内精密度3.29%~5.56%,日间精密度4.32%~6.45%;不同乳饮料的回收率范围变化为87.73%~106.37%。此方法中硫氰酸钠检出限是0.024 mg·kg-1。%Ultrasonic-assisted solid phase extraction method was developed to determine sodium thiocyanate of dairy beverage by high-performance liquid chromatography,which studied importantly the sample pretreatment. Using acetonitrile and trichloroacetic acid as precipitate protein, the precipitate protein and extraction of the sodium thiocyanate contaminant could be achieved effectively,and the calibration curve was linear in the range of 0.05-50 mg·kg-1,intra-day precision of 3.29%to 5.56%,inter-day precision of sodium thiocyanate of 4.32% to 6.45% and the recoveries of different dairy beverage range of 87.73% to 106.37%. Sodium thiocyanate of detection limits was 0.024 mg·kg-1 by this method .

  8. pH sensitivity of ammonium transport by Rhbg. (United States)

    Nakhoul, Nazih L; Abdulnour-Nakhoul, Solange M; Schmidt, Eric; Doetjes, Rienk; Rabon, Edd; Hamm, L Lee


    Rhbg is a membrane glycoprotein that is involved in NH(3)/NH(4)(+) transport. Several models have been proposed to describe Rhbg, including an electroneutral NH(4)(+)/H(+) exchanger, a uniporter, an NH(4)(+) channel, or even a gas channel. In this study, we characterized the pH sensitivity of Rhbg expressed in Xenopus oocytes. We used two-electrode voltage clamp and ion-selective microelectrodes to measure NH(4)(+)-induced [and methyl ammonium (MA(+))] currents and changes in intracellular pH (pH(i)), respectively. In oocytes expressing Rhbg, 5 mM NH(4)Cl (NH(3)/NH(4)(+)) at extracellular pH (pH(o)) of 7.5 induced an inward current, decreased pH(i), and depolarized the cell. Raising pH(o) to 8.2 significantly enhanced the NH(4)(+)-induced current and pH(i) changes, whereas decreasing bath pH to 6.5 inhibited these changes. Lowering pH(i) (decreased by butyrate) also inhibited the NH(4)(+)-induced current and pH(i) decrease. In oocytes expressing Rhbg, 5 mM methyl amine hydrochloride (MA/MA(+)), often used as an NH(4)Cl substitute, induced an inward current, a pH(i) increase (not a decrease), and depolarization of the cell. Exposing the oocyte to MA/MA(+) at alkaline bath pH (8.2) enhanced the MA(+)-induced current, whereas lowering bath pH to 6.5 inhibited the MA(+) current completely. Exposing the oocyte to MA/MA(+) at low pH(i) abolished the MA(+)-induced current and depolarization; however, pH(i) still increased. These data indicate that 1) transport of NH(4)(+) and MA/MA(+) by Rhbg is pH sensitive; 2) electrogenic NH(4)(+) and MA(+) transport are stimulated by alkaline pH(o) but inhibited by acidic pH(i) or pH(o); and 3) electroneutral transport of MA by Rhbg is likely but is less sensitive to pH changes.

  9. High Pressure Burn Rate Measurements on an Ammonium Perchlorate Propellant

    Energy Technology Data Exchange (ETDEWEB)

    Glascoe, E A; Tan, N


    High pressure deflagration rate measurements of a unique ammonium perchlorate (AP) based propellant are required to design the base burn motor for a Raytheon weapon system. The results of these deflagration rate measurements will be key in assessing safety and performance of the system. In particular, the system may experience transient pressures on the order of 100's of MPa (10's kPSI). Previous studies on similar AP based materials demonstrate that low pressure (e.g. P < 10 MPa or 1500 PSI) burn rates can be quite different than the elevated pressure deflagration rate measurements (see References and HPP results discussed herein), hence elevated pressure measurements are necessary in order understand the deflagration behavior under relevant conditions. Previous work on explosives have shown that at 100's of MPa some explosives will transition from a laminar burn mechanism to a convective burn mechanism in a process termed deconsolidative burning. The resulting burn rates that are orders-of-magnitude faster than the laminar burn rates. Materials that transition to the deconsolidative-convective burn mechanism at elevated pressures have been shown to be considerably more violent in confined heating experiments (i.e. cook-off scenarios). The mechanisms of propellant and explosive deflagration are extremely complex and include both chemical, and mechanical processes, hence predicting the behavior and rate of a novel material or formulation is difficult if not impossible. In this work, the AP/HTPB based material, TAL-1503 (B-2049), was burned in a constant volume apparatus in argon up to 300 MPa (ca. 44 kPSI). The burn rate and pressure were measured in-situ and used to calculate a pressure dependent burn rate. In general, the material appears to burn in a laminar fashion at these elevated pressures. The experiment was reproduced multiple times and the burn rate law using the best data is B = (0.6 {+-} 0.1) x P{sup (1.05{+-}0.02)} where B is the burn

  10. Oligo-nuclear silver thiocyanate complexes with monodentate tertiary phosphine ligands, including novel 'cubane' and 'step' tetramer forms of AgSCN : PR3 (1:1)4. (United States)

    Bowmaker, Graham A; Di Nicola, Corrado; Effendy; Hanna, John V; Healy, Peter C; King, Scott P; Marchetti, Fabio; Pettinari, Claudio; Robinson, Ward T; Skelton, Brian W; Sobolev, Alexandre N; Tăbăcaru, Aurel; White, Allan H


    Adducts of a number of tertiary pnicogen ligands ER(3) (triphenyl-phosphine and -arsine (PPh(3),AsPh(3)), diphenyl,2-pyridylphosphine (PPh(2)py), tris(4-fluorophenyl)phosphine (P(C(6)H(4)-4F)(3)), tris(2-tolyl)phosphine (P(o-tol)(3)), tris(cyclohexyl)phosphine (PCy(3))), with silver(I) thiocyanate, AgSCN are structurally and spectroscopically characterized. The 1:3 AgSCN : ER(3) complexes structurally defined (for PPh(3),AsPh(3) (diversely solvated)) take the form [(R(3)E)(3)AgX], the thiocyanate X = NCS being N-bound, thus [(Ph(3)E)Ag(NCS)]. A 1:2 complex with PPh(2)py, takes the binuclear form [(pyPh(2)P)(2)Ag()Ag(PPh(2)py)(2)] with an eight-membered cyclic core. 1:1 complexes are defined with PPh(2)py, P(o-tol)(3) and PCy(3); binuclear forms [(R(3)P)Ag()Ag(PR(3))] are obtained with P(o-tol)(3) (two polymorphs), while novel isomeric tetranuclear forms, which may be envisaged as dimers of dimers, are obtained with PPh(2)py, and, as further polymorphs, with PCy(3); these latter may be considered as extensions of the 'cubane' and 'step' forms previously described for [(R(3)E)AgX](4) (X = halide) complexes. Solvent-assisted mechanochemical or solvent-assisted solid-state synthesis methods were employed in some cases, where complexes could not be obtained by conventional solution methods, or where such methods yielded a mixture of polymorphs unsuitable for solid-state spectroscopy. The wavenumbers of the ν(CN) bands in the IR spectra are in broad agreement with the empirical rule that distinguishes bridging from terminal bonding, but exceptions occur for compounds that have a double SCN bridged dimeric structure, and replacement of PPh(3) with PPh(2)py apparently causes a significant decrease in ν(CN) to well below the range expected for bridging SCN in these structures. (31)P CP MAS NMR spectra yield additional parameters that allow a correlation between the structures and spectra.

  11. Simultaneous immobilization of ammonium and phosphate from aqueous solution using zeolites synthesized from fly ashes. (United States)

    Ji, X D; Zhang, M L; Ke, Y Y; Song, Y C


    Zeolites were synthesized from silica-rich (SF-Z) and calcium-rich (CF-Z) fly ashes, respectively, and their performance in immobilizing ammonium and phosphate was investigated through batch experiments. The cation exchange capacity and phosphate immobilization capacity of SF-Z were identified as 2.79 meq/g and 12.97 mg/g while those of CF-Z were 0.69 meq/g and 87.41 mg/g, respectively. The mixture of SF-Z and CF-Z (MSC-Z) immobilized simultaneously ammonium and phosphate, and the ratio of SF-Z to CF-Z depended on the ammonium and phosphate concentrations in wastewater and the discharge standard. The adsorption processes of ammonium and phosphate on MSC-Z followed Ho's pseudo-second-order model and the intra-particle diffusion was a rate-controlling step. The Langmuir model produced better suitability to the equilibrium data. The thermodynamic study revealed that the adsorption of both ammonium and phosphate on MSC-Z was an endothermic reaction. After treatment by MSC-Z, the ammonium and phosphate concentrations in wastewater from a sewage treatment plant decreased from 7.45 and 1.42 mg/L to 2.06 and 0.51 mg/L, respectively, and met Surface Water Environment Quality Standard in China δ. These results show that the immobilization of ammonium and phosphate in wastewater can be achieved by the combination of zeolites synthesized from silica-rich and calcium-rich fly ashes.

  12. N-Chlorotaurine and ammonium chloride: an antiseptic preparation with strong bactericidal activity. (United States)

    Gottardi, Waldemar; Arnitz, Roland; Nagl, Markus


    The bactericidal activity of the endogenous antiseptic N-chlorotaurine (NCT) is significantly enhanced in the presence of ammonium chloride which induces the formation of monochloramine (NH(2)Cl) whose strong bactericidal activity is well known. In this study the properties of NCT plus ammonium chloride have been investigated. The reaction of active chlorine compounds like chloramine-T (N-chlorotoluene-sulfonamide sodium), chloroisocyanuric acid derivatives, hypochlorites (NaOCl, CaOCl(2)) with ammonium chloride did not stop at the stage of monochloramine, and the pungent smelling by-products di- and trichloramine, NHCl(2) and NCl(3), were also formed. This was not the case with NCT where only monochloramine was generated. The equilibrium constant of the reaction of NCT with ammonium was found to be [Formula: see text] , which allows to estimate the equilibrium concentration of monochloramine in aqueous solutions of NCT and ammonium chloride. At concentrations each ranging between 0.01% and 1.0% it comes to [NH(2)Cl]=3.5-254 ppm. As an unexpected result the monochloramine containing formulation turned out to be most stable in plain water without buffer additives. Quantitative killing assays revealed complete inactivation of 10(6) to 10(7)CFU/mL of seven bacterial strains by 0.1% NCT plus 0.1% ammonium chloride within 5 min, while with plain 0.1% NCT an incubation time of 2-4h was needed to achieve the same effect. The highly significant increase of bactericidal activity (200-300-fold) could be assigned to the presence of monochloramine which could be isolated by vacuum distillation. Aqueous solutions of NCT and ammonium chloride provide a highly effective and well tolerable antiseptic preparation appropriate to a treatment cycle of at least 1 month if stored in the refrigerator.

  13. Root ABA Accumulation Enhances Rice Seedling Drought Tolerance under Ammonium Supply: Interaction with Aquaporins (United States)

    Ding, Lei; Li, Yingrui; Wang, Ying; Gao, Limin; Wang, Min; Chaumont, François; Shen, Qirong; Guo, Shiwei


    In previous studies, we demonstrated that ammonium nutrition enhances the drought tolerance of rice seedlings compared to nitrate nutrition and contributes to a higher root water uptake ability. It remains unclear why rice seedlings maintain a higher water uptake ability when supplied with ammonium under drought stress. Here, we focused on the effects of nitrogen form and drought stress on root abscisic acid (ABA) concentration and aquaporin expression using hydroponics experiments and stimulating drought stress with 10% PEG6000. Drought stress decreased the leaf photosynthetic rate and stomatal conductivity and increased the leaf temperature of plants supplied with either ammonium or nitrate, but especially under nitrate supply. After 4 h of PEG treatment, the root protoplast water permeability and the expression of root PIP and TIP genes decreased in plants supplied with ammonium or nitrate. After 24 h of PEG treatment, the root hydraulic conductivity, the protoplast water permeability, and the expression of some aquaporin genes increased in plants supplied with ammonium compared to those under non-PEG treatment. Root ABA accumulation was induced by 24 h of PEG treatment, especially in plants supplied with ammonium. The addition of exogenous ABA decreased the expression of PIP and TIP genes under non-PEG treatment but increased the expression of some of them under PEG treatment. We concluded that drought stress induced a down-regulation of aquaporin expression, which appeared earlier than did root ABA accumulation. With continued drought stress, aquaporin expression and activity increased due to root ABA accumulation in plants supplied with ammonium. PMID:27559341

  14. An Electronic Tongue Designed to Detect Ammonium Nitrate in Aqueous Solutions

    Directory of Open Access Journals (Sweden)

    Inmaculada Campos


    Full Text Available An electronic tongue has been developed to monitor the presence of ammonium nitrate in water. It is based on pulse voltammetry and consists of an array of eight working electrodes (Au; Pt; Rh; Ir; Cu; Co; Ag and Ni encapsulated in a stainless steel cylinder. In a first step the electrochemical response of the different electrodes was studied in the presence of ammonium nitrate in water in order to further design the wave form used in the voltammetric tongue. The response of the electronic tongue was then tested in the presence of a set of 15 common inorganic salts; i.e.; NH4NO3; MgSO4; NH4Cl; NaCl; Na2CO3; (NH42SO4; MgCl2; Na3PO4; K2SO4; K2CO3; CaCl2; NaH2PO4; KCl; NaNO3; K2HPO4. A PCA plot showed a fairly good discrimination between ammonium nitrate and the remaining salts studied. In addition Fuzzy Art map analyses determined that the best classification was obtained using the Pt; Co; Cu and Ni electrodes. Moreover; PLS regression allowed the creation of a model to correlate the voltammetric response of the electrodes with concentrations of ammonium nitrate in the presence of potential interferents such as ammonium chloride and sodium nitrate.

  15. Resistance of Pseudomonas to Quaternary Ammonium Compounds. I. Growth in Benzalkonium Chloride Solution (United States)

    Adair, Frank W.; Geftic, Sam G.; Gelzer, Justus


    Resistant cells of Pseudomonas aeruginosa and a waterborne Pseudomonas sp. (strain Z-R) were able to multiply in nitrogen-free minimal salts solution containing various concentrations of commercially prepared, ammonium acetate-buffered benzalkonium chloride (CBC), a potent antimicrobial agent. As the CBC concentration increased, growth increased until a point was reached at which the extent of growth leveled off or was completely depressed. Minimal salts solutions of pure benzalkonium chloride (PBC) containing no ammonium acetate did not support bacterial growth. When ammonium acetate was added to PBC solutions in the same concentrations found in CBC solutions, growth patterns developed that were comparable to those found with CBC. Likewise, (NH4)2SO4 added to PBC solutions supported growth of both organisms. P. aeruginosa was initially resistant to CBC levels of 0.02% and it was adapted to tolerate levels as high as 0.36%. Strain Z-R was naturally resistant to 0.4% CBC. Since ammonium acetate, carried over by the CBC used in drug formulations and disinfectant solutions, has the potential to support the growth of resistant bacteria and thus make possible the risk of serious infection, it is suggested that regulations allowing the presence of ammonium acetate in CBC solution be reconsidered. PMID:4984761

  16. Microwave-assisted pretreatment of woody biomass with ammonium molybdate activated by H2O2. (United States)

    Verma, Pradeep; Watanabe, Takahito; Honda, Yoichi; Watanabe, Takashi


    Pretreatments for enzymatic saccharification are crucial for the establishment of lignocellulosic biorefineries. In this study, we focused on ammonium ions and peroxometal complexes as potential delignifying agents. We first examined the pretreatment of beech wood with nine different ammonium salts in the presence of H(2)O(2). Significant pretreatment effects were found only for ammonium molybdate, which is transformed to a peroxometal complex on reacting with H(2)O(2). Since microwave sensitizer effects are expected for (peroxo)molybdate, beech wood was pretreated using external heating and microwave irradiation. As a result, a maximum sugar yield of 59.5% was obtained by microwave irradiation at 140°C for 30 min, while external heating in an autoclave gave a sugar yield of 41.8%. We also found that an ammonium ion is the key counterion accelerating the pretreatment with molybdate. These results highlight the powerful selective delignifying capability of the H(2)O(2)-activated ammonium molybdate system energized by microwave radiation.

  17. Preparation of anhydrous magnesium chloride in a gas-solid reaction with ammonium carnallite

    Institute of Scientific and Technical Information of China (English)

    Zhou Ningbo; Chen Baizhen; He Xinkuai; Li Yibing


    Dehydrated ammonium carnallite was synthesized with bischofite from salt lake and ammonium chloride solution in a 1:1 molar ratio of MgCl2:NH4Cl,dehydrated at 160℃ for about 4 h.The yield was above 85%.The product was then mixed with solid-state ammonium chloride with a 1:4 mass ratio for the further dehydration at 410℃.The decomposition of NH4Cl made a pressure of NH3 at 30.5 kPa to prevent the hydrolysis of ammonium carnallite.The anhydration of magnesium chloride was achieved at 700℃.The results showed that anhydrous magnesium chloride contains magnesium oxide in an amount that was less than 0.1% by weight.XRD pattern and SEM micrograph showed a good dispersion of ammonium carnallite and anhydrous magnesium chloride crystals with well-distributed big grains,just enough to meet the need for the production of magnesium metal in the electrolysis process.

  18. Evaluation of natural zeolite clinoptilolite efficiency for the removal of ammonium and nitrate from aquatic solutions

    Directory of Open Access Journals (Sweden)

    Mozhdeh Murkani


    Full Text Available Background: Surface water and groundwater pollution with various forms of nitrogen such as ammonium and nitrate ions is one of the main environmental risks. The major objectives of this study were to evaluate the capacity of natural zeolite (clinoptilolite to remove NO3– and NH4+ from polluted water under both batch and column conditions. Methods: The laboratory batch and column experiments were conducted to investigate the feasibility of clinoptilolite as the adsorbent for removal of nitrate (NO3– and ammonium (NH4+ ions from aqueous solution. The effects of pH, clinoptilolite dosage, contact time, and initial metal ion concentration on NO3– and NH4+ removal were investigated in a batch system. Results: Equilibrium time for NO3– and NH4+ ions exchange was 60 minutes and the optimum adsorbent dosage for their removal was 1 and 2.5 g/L, respectively. The adsorption isotherm of reaction (r> 0.9 and optimum entered concentration of ammonium and nitrate (30 and 6.5 mg/L, respectively were in accordance with Freundlich isotherm model. The ammonium removal rate increased by 98% after increasing the contact time. Conclusion: Our findings confirmed that natural Clinoptilolite can be used as one of effective, suitable, and low-costing adsorbent for removing ammonium from polluted waters.

  19. Enhanced Ionization of Phosphopeptide Using Ammonium Phosphate as Matrix Additive by MALDI-MS

    Institute of Scientific and Technical Information of China (English)

    ZHANG,Ying; LU,Hao-Jie; YANG,Peng-Yuan


    A new method based upon adding ammonium phosphate as a matrix additive to enhance the ionization efficiency of phosphopeptide in matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) was described. Furthermore, influences of different phosphate salts at various concentrations on the ionization efficiency of phosphopeptide were investigated systematically, finding that the signal intensity for phosphopeptide 48FQ[pS]EEQQQTEDELQDK63 digested from β-casein were 5 to 8 times increased in an optimized condition with 10 mmol/L ammonium monobasic phosphate or 3 to 4 times increased with 10 mmol/L ammonium dibasic phosphate as additive to matrix 2,5-dihydroxybenzoic acid, respectively. Compared with the most optimized matrix system that was currently reported for special ionization of phosphopeptides, the signal intensity of this phosphopeptide was also enhanced by twice when introducing 5 mmol/L ammonium dibasic phosphate into matrix 2,4,6-trihydroxyacetophenone. In addition, the mechanism was also discussed, assuming that the cooperation function of ammonium cation and phosphate anion was of great importance in enhancing the ionization efficiency of phosphopeptide in MALDI-MS.

  20. Accurate Measurement of the in vivo Ammonium Concentration in Saccharomyces cerevisiae

    Directory of Open Access Journals (Sweden)

    Hugo F. Cueto-Rojas


    Full Text Available Ammonium (NH4+ is the most common N-source for yeast fermentations, and N-limitation is frequently applied to reduce growth and increase product yields. While there is significant molecular knowledge on NH4+ transport and assimilation, there have been few attempts to measure the in vivo concentration of this metabolite. In this article, we present a sensitive and accurate analytical method to quantify the in vivo intracellular ammonium concentration in Saccharomyces cerevisiae based on standard rapid sampling and metabolomics techniques. The method validation experiments required the development of a proper sample processing protocol to minimize ammonium production/consumption during biomass extraction by assessing the impact of amino acid degradation—an element that is often overlooked. The resulting cold chloroform metabolite extraction method, together with quantification using ultra high performance liquid chromatography-isotope dilution mass spectrometry (UHPLC-IDMS, was not only more sensitive than most of the existing methods but also more accurate than methods that use electrodes, enzymatic reactions, or boiling water or boiling ethanol biomass extraction because it minimized ammonium consumption/production during sampling processing and interference from other metabolites in the quantification of intracellular ammonium. Finally, our validation experiments showed that other metabolites such as pyruvate or 2-oxoglutarate (αKG need to be extracted with cold chloroform to avoid measurements being biased by the degradation of other metabolites (e.g., amino acids.

  1. Accurate Measurement of the in vivo Ammonium Concentration in Saccharomyces cerevisiae. (United States)

    Cueto-Rojas, Hugo F; Maleki Seifar, Reza; Ten Pierick, Angela; Heijnen, Sef J; Wahl, Aljoscha


    Ammonium (NH₄⁺) is the most common N-source for yeast fermentations, and N-limitation is frequently applied to reduce growth and increase product yields. While there is significant molecular knowledge on NH₄⁺ transport and assimilation, there have been few attempts to measure the in vivo concentration of this metabolite. In this article, we present a sensitive and accurate analytical method to quantify the in vivo intracellular ammonium concentration in Saccharomyces cerevisiae based on standard rapid sampling and metabolomics techniques. The method validation experiments required the development of a proper sample processing protocol to minimize ammonium production/consumption during biomass extraction by assessing the impact of amino acid degradation-an element that is often overlooked. The resulting cold chloroform metabolite extraction method, together with quantification using ultra high performance liquid chromatography-isotope dilution mass spectrometry (UHPLC-IDMS), was not only more sensitive than most of the existing methods but also more accurate than methods that use electrodes, enzymatic reactions, or boiling water or boiling ethanol biomass extraction because it minimized ammonium consumption/production during sampling processing and interference from other metabolites in the quantification of intracellular ammonium. Finally, our validation experiments showed that other metabolites such as pyruvate or 2-oxoglutarate (αKG) need to be extracted with cold chloroform to avoid measurements being biased by the degradation of other metabolites (e.g., amino acids).

  2. Characteristics of simultaneous ammonium and phosphate adsorption from hydrolysis urine onto natural loess. (United States)

    Jiang, Shanqing; Wang, Xiaochang; Yang, Shengjiong; Shi, Honglei


    Nutrient recovery from human urine is a promising pretreatment of domestic wastewater and provides a sustainable recyclability of N and P. In this study, batch experiments were conducted to identify the characteristics of natural loess (NL) for the adsorption and recovery of ammonium and phosphate from hydrolysis urine (HU). The adsorption mechanisms, the adsorption kinetics and isotherms, as well as the major influencing factors, such as pH and temperature, were investigated. Results revealed that adsorption of ammonium occurred by means of ion exchange and molecule adsorption with the ≡ Si-OH groups, while phosphate adsorption was based on the calcium phosphate precipitation reaction and formation of inner-sphere complexes with ≡ M-OH groups. The adsorption processes of ammonium and phosphate were well described by the pseudo-second-order kinetic model and the Freundlich isotherm model. Adsorption of phosphate was endothermic, while ammonium adsorption was exothermic. Furthermore, the maximum ammonium and phosphate adsorption capacities of NL was 23.24 mg N g(-1) and 4.01 mg P g(-1) at an initial pH of 9 and 10, respectively. Results demonstrated that nutrient-adsorbed NL used as compound fertilizer or conventional fertilizer superaddition was feasible for its high contents of N and P as well as its environmental friendliness.

  3. Alternative process to produce UF{sub 4} using the effluent from ammonium uranyl carbonate route

    Energy Technology Data Exchange (ETDEWEB)

    Silva Neto, Joao B.; Garcia, Rafael Henrique Lazzari; Dal Vechio, Edvaldo, E-mail: [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), SP (Brazil); Riella, Humberto G., E-mail: [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil); Instituto Nacional de Ciencias e Tecnologia de Reatores Nucleares Inovadores (INCT/CNPq) (Brazil); Carvalho, Elita F. Urano de; Durazzo, Michelangelo [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), SP (Brazil); Instituto Nacional de Ciencias e Tecnologia de Reatores Nucleares Inovadores (INCT/CNPq) (Brazil)


    The Nuclear Fuel Centre of IPEN / CNEN - SP develops and manufactures dispersion fuel with high uranium concentration. It meets the demand of the IEA-R1 reactor and future research reactors to be constructed in Brazil. The fuel uses uranium silicide (U{sub 3}Si{sub 2}) dispersed in aluminum. For producing the fuel, the process of uranium hexafluoride (UF{sub 6}) conversion consist in obtaining U{sub 3}Si{sub 2} and / or U{sub 3}O{sub 8} through the preparation of intermediate compounds, among them ammonium uranyl carbonate - AUC, ammonium diuranate - DUA and uranium tetrafluoride - UF{sub 4}. This work describes a procedure for preparing uranium tetrafluoride via a dry route, using as raw material the filtrate generated when ammonium uranyl carbonate is routinely produced. The filtrate consists mainly of a solution containing high concentrations of ammonium (NH{sup 4+}), fluoride (F{sup -}), carbonate (CO{sup 3-}) and low concentrations of uranium. The procedure consists in recovering NH{sup 4F} and uranium, as UF{sub 4}, through the crystallization of ammonium bifluoride (NH{sub 4}HF{sub 2}) and, in a later step, the addition of UO{sub 2}, occurring fluoridation and decomposition. The UF{sub 4} obtained is further diluted in the UF{sub 4} produced routinely at IPEN / CNEN-SP by a wet route process. (author)

  4. Regulation of length and density of Arabidopsis root hairs by ammonium and nitrate. (United States)

    Vatter, Thomas; Neuhäuser, Benjamin; Stetter, Markus; Ludewig, Uwe


    Root hairs expand the effective root surface to increase the uptake of nutrients and water from the soil. Here the local effects of the two major nitrogen sources, ammonium and nitrate, on root hairs were investigated using split plates. In three contrasting accessions of A. thaliana, namely Col-0, Tsu-0 and Sha, root hairs were differentially affected by the nitrogen forms and their concentration. Root hairs in Sha were short in the absence of nitrate. In Col-0, hair length was moderately decreased with increasing nitrate or ammonium. In all accessions, the root hair density was insensitive to 1,000-fold changes in the ammonium concentrations, when supplied locally as the exclusive nitrogen form. In contrast, the root hair density generally increased with nitrate as the exclusive local nitrogen source. The nitrate sensitivity was reduced at mM concentrations in a loss-of-function mutant of the nitrate transporter and sensor gene NRT1;1 (NPF6.3). Little differences with respect to ammonium were found in a mutant lacking four high affinity AMT-type ammonium transporters, but interestingly, the response to high nitrate was reduced and may indicate a general defect in nitrogen signaling in that mutant. Genetic diversity and the presence of the nitrogen transceptor NRT1;1 explain heterogeneity in the responses of root hairs to different nitrogen forms in Arabidopsis accessions.

  5. Determination of ammonium on an integrated microchip with LED-induced fluorescence detection

    Institute of Scientific and Technical Information of China (English)

    Shuhua Xue; Katsumi Uchiyama; Hai-fang Li


    A simply fabricated microfluidic device integrated with a fluorescence detection system has been developed for on-line determination of ammonium in aqueous samples.A 365-nm light-emitting diode(LED)as an excitation source and a minor band pass filter were mounted into a polydimethylsiloxane(PDMS)-based microchip for the purpose of miniaturization of the entire analytical system.The ammonium sample reacted with o-phthaldialdehyde(OPA)on-chip with sodium sulfite as reducing reagent to produce a fluorescent isoindole derivative,which can emit fluorescence signal at about 425 nm when excited at 365 nm.Effects of pH,flow rate of solutions,concentrations of OPA-reagent,phosphate and sulfite salt were investigated.The calibration curve of ammonium in the range of 0.018-1.8 μg/mL showed a good linear relationship with R2 =0.9985,and the detection limit was(S/N =3)3.6 × 10-4 μg/mL.The relative standard deviation was 2.8%(n =11)by calculating at 0.18 μg/mL ammonium for repeated detection.The system was applied to determine the ammonium concentration in rain and river waters,even extent to other analytes fluorescence detection by the presented device.

  6. Isolation and identification of bacteria responsible for simultaneous anaerobic ammonium and sulfate removal

    Institute of Scientific and Technical Information of China (English)


    Sulfate-dependent anaerobic ammonium oxidation is a novel biological reaction,in which ammonium is oxidized with sulfate as the electron acceptor under anoxic conditions.Ammonium and sulfate are cosmopolitan chemical species which are an integral part of the global nitrogen and sulfur cycles.A detailed exploration of sulfate-dependent anaerobic ammonium oxidation is quite practical.In this work,a bacterial strain named ASR has been isolated from an anaerobic ammonia and sulfate removing reactor working under steady-state.On the basis of electron microscopy,physiological tests and 16S rDNA phylogenetic sequence analysis,the strain ASR is found to be related to Bacillus benzoevorans.According to the biological carbon source utilization test,the strain ASR could use many carbon sources.Its optimum pH value and temperature were 8.5 and 30 °C,respectively.The test proves that the strain ASR is able to use sulfate to oxidize ammonia anaerobically.The maximum ammonia and sulfate removal rates were 44.4% and 40.0%,respectively.The present study provided biological evidence for the confirmation and development of sulfate-dependent anaerobic ammonium oxidation and brought new insights into the global nitrogen and sulfur cycles.

  7. Understanding the impact of the central atom on the ionic liquid behavior: Phosphonium vs ammonium cations

    Energy Technology Data Exchange (ETDEWEB)

    Carvalho, Pedro J.; Ventura, Sónia P. M.; Batista, Marta L. S.; Schröder, Bernd; Coutinho, João A. P., E-mail: [CICECO, Departamento de Química, Universidade de Aveiro, 3810-193 Aveiro (Portugal); Gonçalves, Fernando [Departamento de Biologia e CESAM (Centro de Estudos do Ambiente e do Mar), Universidade de Aveiro, 3810-193 Aveiro (Portugal); Esperança, José [Instituto de Tecnologia Química e Biológica, Universidade Nova de Lisboa, 2780-901 Oeiras (Portugal); Mutelet, Fabrice [Laboratoire Réactions et Génie des Procédés, CNRS (UPR3349), Nancy-Université, 1 rue Grandville, BP 20451 54001 Nancy (France)


    The influence of the cation's central atom in the behavior of pairs of ammonium- and phosphonium-based ionic liquids was investigated through the measurement of densities, viscosities, melting temperatures, activity coefficients at infinite dilution, refractive indices, and toxicity against Vibrio fischeri. All the properties investigated are affected by the cation's central atom nature, with ammonium-based ionic liquids presenting higher densities, viscosities, melting temperatures, and enthalpies. Activity coefficients at infinite dilution show the ammonium-based ionic liquids to present slightly higher infinite dilution activity coefficients for non-polar solvents, becoming slightly lower for polar solvents, suggesting that the ammonium-based ionic liquids present somewhat higher polarities. In good agreement these compounds present lower toxicities than the phosphonium congeners. To explain this behavior quantum chemical gas phase DFT calculations were performed on isolated ion pairs at the BP-TZVP level of theory. Electronic density results were used to derive electrostatic potentials of the identified minimum conformers. Electrostatic potential-derived CHelpG and Natural Population Analysis charges show the P atom of the tetraalkylphosphonium-based ionic liquids cation to be more positively charged than the N atom in the tetraalkylammonium-based analogous IL cation, and a noticeable charge delocalization occurring in the tetraalkylammonium cation, when compared with the respective phosphonium congener. It is argued that this charge delocalization is responsible for the enhanced polarity observed on the ammonium based ionic liquids explaining the changes in the thermophysical properties observed.

  8. Synergetic stress of acids and ammonium on the shift in the methanogenic pathways during thermophilic anaerobic digestion of organics. (United States)

    Lü, Fan; Hao, Liping; Guan, Dongxing; Qi, Yujiao; Shao, Liming; He, Pinjing


    Combined effects of acids and ammonium on functional pathway and microbial structure during organics methanization were investigated by stable isotopic method and quantitative PCR. The results showed that the stress from acids and ammonium was synergetic, resulted in different inhibition for acetoclastic and hydrogenotrophic methanogenesis and syntrophic acetate oxidation, leading to pathway shift. Methane production from acetate was affected more by acetate than by ammonium until the ammonium concentration reached 6-7 g-N/L. When the ammonium concentration exceeded 6 g-N/L, ammonium inhibition was strengthened by the increased concentration of acetate. At a low acetate concentration (50 mmol/L), acetoclastic methanogenesis dominated, regardless of ammonium concentration. At higher acetate concentrations (150 and 250 mmol/L) and at low-medium ammonium levels (1-4 g-N/L), acetate was mainly degraded by acetoclastic methanogenesis, while residual acetate was degraded by a combination of acetoclastic methanogenesis and the syntrophic reaction of syntrophic acetate oxidization and hydrogenotrophic methanogenesis with the latter dominating at 250 mmol/L acetate. At high ammonium levels (6-7 g-N/L), the degradation of acetate in the 150 mmol/L treatment was firstly through a combination of acetoclastic methanogenesis and the syntrophic pathway and then gradually shifted to the syntrophic pathway, while the degradation of acetate in the 250 mmol/L treatment was completely by the syntrophic pathway.

  9. The mechanism for production of beryllium fluoride from the product of ammonium fluoride processing of beryllium- containing raw material (United States)

    Kraydenko, R. I.; Dyachenko, A. N.; Malyutin, L. N.; Petlin, I. V.


    The technique of fluorite-phenacite-bertrandite ores from Russian Ermakovskoe deposit processing by ammonium bifluoride is described. To determine the temperature mode and the thermal dissociation mechanism of ammonium tetrafluoroberyllate (the product of ammonium-fluoride leaching of the ore) the TG/DTA have been carried out. By IR spectroscopy and XRD the semi-products of ammonium tetrafluoroberyllate thermal dissociation have been identified. The hygroscopic low-temperature beryllium fluoride forms higher than 380°C. The less hydroscopic form of BeF2 have been produced at 600°C.

  10. d15N dynamics of ammonium and particulate nitrogen during the growth season of a eutrophic estuary

    DEFF Research Database (Denmark)

    De Brabandere, Loreto; Brion, N.; Elskens, M.;


    We monitored the stable nitrogen isotopic composition (d15N) of suspended matter and ammonium in the freshwater stretch of the Scheldt estuary (Belgium) over a full year to investigate for seasonal evolution and possible co-variation between isotopic signatures. The d15N value of ammonium remained...... rather constant during winter (average = +11.4 pro mille) but increased significantly with the spring and summer bloom, reaching values as high as +70 pro mille. This enrichment of the ammonium pool in 15N coincided with significant ammonium depletion during summer period, suggesting a close causal...

  11. Synthesis of nano-crystalline hydroxyapatite and ammonium sulfate from phosphogypsum waste

    Energy Technology Data Exchange (ETDEWEB)

    Mousa, Sahar, E-mail: [Inorganic Chemistry Department, National Research Centre, Dokki, P.O.Box:12622, Postal code: 11787 Cairo (Egypt); King Abdulaziz University, Science and Art College, Chemistry Department, Rabigh Campus, P.O. Box:344, Postal code: 21911 Rabigh (Saudi Arabia); Hanna, Adly [Inorganic Chemistry Department, National Research Centre, Dokki, P.O.Box:12622, Postal code: 11787 Cairo (Egypt)


    Graphical abstract: TEM micrograph of dried HAP at 800 °C. -- Abstract: Phosphogypsum (PG) waste which is derived from phosphoric acid manufacture by using wet method was converted into hydroxyapatite (HAP) and ammonium sulfate. Very simple method was applied by reacting PG with phosphoric acid in alkaline medium with adjusting pH using ammonia solution. The obtained nano-HAP was dried at 80 °C and calcined at 600 °C and 900 °C for 2 h. Both of HAP and ammonium sulfate were characterized by X-ray diffraction (XRD) and infrared spectroscopy (IR) to study the structural evolution. The thermal behavior of nano-HAP was studied; the particle size and morphology were estimated by using transmission electron microscopy (TEM) and scanning electron microscopy (SEM). All the results showed that HAP nano-crystalline and ammonium sulfate can successfully be produced from phosphogypsum waste.

  12. Enhanced electrochemical performance of ammonium vanadium bronze through sodium cation intercalation and optimization of electrolyte. (United States)

    Fei, Hailong; Liu, Xin; Li, Huan; Wei, Mingdeng


    A new type of platelet-like ammonium vanadium bronze (NH4)2V6O16 is first used as cathode material for Na-ion battery. The discharge capacity and cycling stability is improved by the intercalation of Na(+) and using NaPF6 as electrolyte. Raman spectrum shows that the crystalline structure of (NH4)2V6O16 is changed after the intercalation of Na(+) to (NH4)2V6O16. Furthermore, the obtained sodium ammonium vanadium bronze shows smaller charge transfer resistance than (NH4)2V6O16, which would favor superior discharge capacity and good cycling stability. Additionally, NaPF6 is prior to NaClO4 as electrolyte for ammonium vanadium bronze cathode materials.


    Directory of Open Access Journals (Sweden)



    Full Text Available Considering the well-known mechanism of adaptable resistance of microorganisms to chemical compounds through biofilms formation and the widespread use of N-heterocyclic quaternary ammonium salts (QAC as disinfectants, in this study we have evaluate the effect of 8 newly synthesized symmetrical and unsymmetrical diquaternary ammonium salts of 1,2-bis-(4-pyridil-ethane on bacterial biofilms produced by three different bacterial strains. The effect of the exposure to quaternary ammonium salts on biofilm communities was investigated within biofilms obtained in a conventional testing system, on stainless steel and glass surfaces. Differential plate counts were used to characterize the developed communities and the effects of QAC exposure and the results were correlated with epifluorescence microphotographs. The data obtained revealed a significant reduction of bacterial cells in the biofilms tested with 4-7 log CFU for all the QAC.

  14. Synthesis and characterization of chitosan based dye containing quaternary ammonium group. (United States)

    Tang, Ruilin; Zhang, Ying; Zhang, Yang; Yu, Zhiming


    A new antimicrobial biopolymer dye was synthesized by reaction of quaternary ammonium salt of chitosan and reactive red x-3b. And quaternary ammonium salt of chitosan was produced by grafting glycidyltrimethylammonium chloride on chitosan. The synthesized materials were characterized by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), solubility test and antimicrobial test. Results show that the antimicrobial biopolymer dye was combined by N(+)(CH3)3 of quaternary ammonium salt of chitosan and sulfonic group of reactive red x-3b. Water solubility of chitosan biopolymer dye was increased as well as pH value. In addition, antibacterial property of new synthesized dye was excellent, whose antibacterial rates of Staphylococcus and Escherichia coli were both bigger than 99%. These results may provide new perspectives on improving the decorative properties and antimicrobial properties in wood industry.

  15. Ammonium hydrogen bis[4-(2-phenyl-2H-tetrazol-5-ylbenzoate

    Directory of Open Access Journals (Sweden)

    Daron E. Janzen


    Full Text Available The title salt, NH4+·H+·2C14H9N4O2−, is composed of an ammonium cation with a strong intermolecular negatively charge-assisted hydrogen-bonded acid/conjugate base-pair monoanion. The carboxylic acid H atom is located on an inversion center, while the N atom of the ammonium cation is located on a twofold rotation axis. In the crystal, the N—H bonds of each ammonium cation act as donors with carboxylate O-atom acceptors to form chains along the a-axis direction. The chains are linked by offset π–π interactions [intercentroid distances = 3.588 (2 and 3.686 (2 Å], forming layers parallel to the ab plane.

  16. Effect of ammonium on nitrous oxide emission during denitrification with different electron donors

    Institute of Scientific and Technical Information of China (English)

    Guangxue Wu; Xiaofeng Zhai; Chengai Jiang; Yuntao Guan


    Nitrous oxide (N2O) emission during denitrification is receiving intensive attention due to its high potential to cause greenhouse effects.In this study,denitrifiers were acclimated in sequencing batch reactors with methanol or acetate as the electron donor and nitrate as the electron acceptor.The effects of ammonium on N2O emission were examined in batch experiments with various electron donors.With the addition of ammonium,N2O emission increased under all the examined conditions compared to experiments without ammonium addition.With different electron donors,the highest ratio of N2O emission to the removed oxidized nitrogen was 0.70% for methanol,5.34% for acetate,and 34.79% for polyhydroxybutyrate.

  17. Ammonium citrate as enhancement for electrodialytic soil remediation and investigation of soil solution during the process

    DEFF Research Database (Denmark)

    Dias-Ferreira, Celia; Kirkelund, Gunvor Marie; Ottosen, Lisbeth M.


    Seven electrodialytic experiments were conducted using ammonium citrate as enhancing agent to remediate copper and chromium-contaminated soil from a wood-preservation site. The purpose was to investigate the effect of current density (0.2, 1.0 and 1.5 mA cm−2), concentration of enhancing agent (0...... using too high current densities can be a waste of energy. Desorption rate is important and both remediation time and ammonium citrate concentration are relevant parameters. It was possible to collect soil solution samples following an adaptation of the experimental set-up to ensure continuous supply...... of ammonium citrate to the soil in order to keep it saturated during the remediation. Monitoring soil solution gives valuable information on the evolution of remediation and helps deciding when the soil is remediated. Final concentrations in the soil ranged from 220 to 360 mg Cu kg−1 (removals: 78...

  18. Synthesis and antibacterial activity screening of quaternary ammonium derivatives of triazolyl pyranochromenones

    Indian Academy of Sciences (India)



    A series of quaternary ammonium derivatives of triazolyl pyranochromen-2-ones have been synthesized and characterized; their antibacterial potential were investigated against two gram negative (Pseudomonas aeruginosa and Escherichia coli) and two gram positive bacterial strains (Bacillus cereus and Staphylococcus aureus). In order to develop structure-activity relationship (SAR), the effect of varying the substituent (R) at the C-10 position of pyranochromen-2-one as well as the length of the spacer (n) between the triazolyl pyranochromen-2-ones and quaternary ammonium group, on the antibacterial activity of compoundshas been evaluated. Some of the screened compounds exhibited antibacterial potential against the studied strains in the microgram range.

  19. Near-infrared detection of ammonium minerals at Ivanhoe Hot Springs, Nevada (United States)

    Krohn, M. D.


    Airborne Imaging Spectrometer (AIS) data were collected over the fossil hot spring deposit at Ivanhoe, Nevada in order to determine the surface distribution of NH4-bearing minerals. Laboratory studies show that NH4-bearing minerals have characteristic absorption features in the near-infrared (NIR). Ammonium-bearing feldspars and alunites were observed at the surface of Ivanhoe using a hand-held radiometer. However, first look analysis of the AIS images showed that the line was about 500 m east of its intended mark, and the vegetation cover was sufficiently dense to inhibit preliminary attempts at making relative reflectance images for detection of ammonium minerals.

  20. Modeling conversion of ammonium diuranate (ADU) into uranium dioxide (UO2) powder (United States)

    Hung, Nguyen Trong; Thuan, Le Ba; Khoai, Do Van; Lee, Jin-Young; Jyothi, Rajesh Kumar


    In the paper, Brandon mathematical model that describes the relationship between the essential fabrication parameters [reduction temperature (TR), calcination temperature (TC), calcination time (tC) and reduction time (tR)] and specific surface area of ammonium diuranate (ADU)-derived UO2 powder products was established. The proposed models can be used to predict and control the specific surface area of UO2 powders prepared through ADU route. Suitable temperatures for conversion of ADU and ammonium uranyl carbonate (AUC) was examined with the proposed model through assessment of the sinterability of UO2 powders.

  1. Fixed Ammonium in Major Types of Paddy Soils in Hunan Province,China

    Institute of Scientific and Technical Information of China (English)



    The contents, affecting factors, seasonal changes and availability of fixed ammonium in major types ofpaddy soils derived from different parent materials in Hunan Province, China, were studied using the Silva-Bremner method by laboratory and pot experiments. Results showed that the content of fixed ammoniumin the plough horizons ranged from 88.3 mg kg-1 to 388.1 mg kg-1, with 273.2 ± 77.7 mg kg-1 on average,accounting for 11.2% of total soil N on average. Content of fixed ammonium decreased in the order of newlylacustrine clayey paddy soil > alluvial sandy paddy soil > purple clayey paddy soil > newly alluvial sandypaddy soil > yellow clayey paddy soil > reddish-yellow clayey paddy soil > granitic sandy paddy soil. Therewere four distribution patterns of fixed ammonium in the profiles to 1-m depth, i.e., increase with the depth,decrease with increasing depth, no distinct change with the depth, and abrupt increase or decrease in somehorizon. Percentage of fixed ammonium in total N increased with the depth in most of the soils. Fixationof NH4+ by soil was higher at 30 ℃ than at 20 ℃ and 40 ℃, and continuous submergence benefited thefixation of NH4+ in newly alluvial sandy paddy soil, purple clayey paddy soil and alluvial sandy paddy soil,while alternating wetting and drying contributed to the fixation of NH4+ in yellow clayey paddy soil mostly.Fixed ammonium content in the test paddy soils was significantly correlated with < 0.01 mm clay content(P < 0.05), but not with < 0.001 mm clay content, total N, organic N and organic matter. Fixed ammoniumcontent varied with rice growth stages. Application of N fertilizer promoted fixation of NH4+ by soil, and Nuptake by rice plant promoted release of fixed ammonium from the soil. Recently fixed ammonium in paddysoil after N fertilizer application was nearly 100% available to rice plant, while native fixed ammonium wasonly partly available, varying with the soil type and rice type.


    Institute of Scientific and Technical Information of China (English)

    LiuYifan; WangYuying


    Ammonium can change the type of natural clinoptilolite from Jinyun of Zhejiang Province of China.The character of exchange and selectivity of ammonium type clinoptilolite to the alkali and alkaline-earth metal were investigated,the heatresistance and nitric acid-resistance of natural clinoptilolite were discussed.All types of clinoptilolite were researched by means of X-ray,IR spectroscopy,DTA analyses.The ion exchange was experimented by column operation,indicating that the valid amount of exchange capacity of NH4+ type clinoptiloties is more than 25mg/g.

  3. Rotational barriers in ammonium hexachlorometallates as studied by NMR, tunneling spectroscopy and ab initio calculations

    DEFF Research Database (Denmark)

    Birczynski, A.; Lalowicz, Z.T.; Lodziana, Zbigniew


    Ammonium hexachlorometallates, (NH4)(2)MCl6 With M = Pd, Pt, Ir, Os, Re, Se, Sn, Te and Pb, comprise a set of compounds with systematically changing properties. The compounds may be ordered according to decreasing tunnelling frequency (TF) of ammonium ions, which is related to the increasing...... compounds can be divided into two subgroups. The group containing d-metals (Pd, Pt, Ir, Os, Re) has stronger covalent M-Cl bond and smaller unit cell. The second category contains p-elements (Se, Sn, Te, Pb), which exhibit larger ionic charges and the larger unit cell. The differences in the electronic...

  4. Fragmentation and Growth Energetics of Ammonium Bisulfate Clusters Relevant to Atmospheric New Particle Formation (United States)

    Bzdek, B. R.; DePalma, J.; Ridge, D. P.; Laskin, J.; Johnston, M. V.


    New particle formation (NPF) may significantly impact cloud albedo and global climate by influencing cloud condensation nuclei levels. The climate effects of NPF are governed by both the nucleation of new clusters and their growth to larger sizes. A firm understanding of the chemical mechanisms of small cluster growth to larger sizes is required to accurately model NPF. However, experimental measurements of the energetics of cluster growth are challenging. This presentation discusses results obtained using a new approach to studying cluster growth, by making measurements of cluster dissociation and inferring growth from the inverse process. In this work, the fragmentation energetics of positively charged ammonium bisulfate clusters of the form [(NH4)x(HSO4)x-1]+ were studied using a 6T Fourier transform ion cyclotron resonance mass spectrometer equipped with surface induced dissociation (SID), a method to fragment ions by impacting them on a surface at a precisely known collision energy. An ammonium bisulfate cluster was isolated and then fragmented by SID. Fragmentation efficiency curves were plotted as a function of collision energy and were fit to a Rice-Ramsperger-Kassel-Marcus/Quasi-Equilibrium Theory (RRKM/QET) model in order to extract threshold energies for dissociation. Two pathways exist for fragmentation of positively charged ammonium bisulfate clusters. The first is a one-step fragmentation pathway whereby the cluster loses an ammonium bisulfate molecule, [(NH4)(HSO4)]. The second fragmentation pathway is a two-step pathway, whereby the cluster first loses an ammonia molecule and next loses a sulfuric acid molecule. Assuming that cluster growth mechanisms are the reverse of cluster dissociation mechanisms, these observations suggest two potential growth pathways for ammonium bisulfate clusters: 1) growth by addition of an ammonium bisulfate molecule to a preexisting cluster and 2) stepwise growth by sequential addition of a sulfuric acid molecule

  5. Application of nonlinear regression analysis for ammonium exchange by natural (Bigadic) clinoptilolite

    Energy Technology Data Exchange (ETDEWEB)

    Gunay, Ahmet [Deparment of Environmental Engineering, Faculty of Engineering and Architecture, Balikesir University (Turkey)], E-mail:


    The experimental data of ammonium exchange by natural Bigadic clinoptilolite was evaluated using nonlinear regression analysis. Three two-parameters isotherm models (Langmuir, Freundlich and Temkin) and three three-parameters isotherm models (Redlich-Peterson, Sips and Khan) were used to analyse the equilibrium data. Fitting of isotherm models was determined using values of standard normalization error procedure (SNE) and coefficient of determination (R{sup 2}). HYBRID error function provided lowest sum of normalized error and Khan model had better performance for modeling the equilibrium data. Thermodynamic investigation indicated that ammonium removal by clinoptilolite was favorable at lower temperatures and exothermic in nature.

  6. Formation of ammonium sulphate in water droplets exposed to gaseous sulphur dioxide and ammonia

    Energy Technology Data Exchange (ETDEWEB)

    van den Heuvel, A.P.; Mason, B.J.


    The rate of formation of ammonium sulphate in water drops exposed to air containing known concentrations of gaseous sulphur dioxide and ammonia has been measured. The mass of sulphate formed is proportional to the product of the surface area of the drops and the time of exposure. Extrapolation of the laboratory results to the atmosphere suggests that the large condensation nuclei 0.2 micronammonium sulphate, are formed by the absorption of SO/sub 2/ and NH/sub 3/ in cloud and fog droplets.

  7. Modification of a Brazilian smectite clay with different quaternary ammonium salts

    Directory of Open Access Journals (Sweden)

    Maria Flávia Delbem


    Full Text Available In this work, a smectite clay from the State of Paraiba, Brazil, was treated with six different types of ammonium salts, which is an usual method to enhance the affinity between the clay and polymer for the preparation of nanocomposites. The clays, before and after modification, were characterized by X ray diffraction. The conformation of the salts within the platelets of the clay depended on the number of long alkyl chains of the salt. The thermal stability of the clays was also studied. The ammonium salts thermal decomposition was explained in light of their position within the organoclays.

  8. Flotation separation of cobalt(Ⅱ) with sodium nitrate-Ammonium Thiocyanate-Hexadecyl Trimethylammonium Bromide System%硝酸钠-硫氢酸铵-溴化十六烷基三甲铵体系浮选分离钴(Ⅱ)

    Institute of Scientific and Technical Information of China (English)

    吴宏伟; 张庆爱


    研究了硝酸钠-硫氢酸铵-溴化十六烷基三甲铵体系浮选分离钴Co(Ⅱ)的行为及其与常见阳离子分离的条件.实验表明:控制一定条件,在少量NaNO3存在下,Co(Ⅱ)与硫氢酸铵、溴化十六烷基三甲铵(CTMAB)形成的三元离子缔合物能浮于盐水相上层并与水分成界面清晰的两相,从而使Co(Ⅱ)得到定量浮选,而Ni(Ⅱ)、Cd(Ⅱ)、 Al(Ⅲ)、Ca(Ⅱ)、Mg(Ⅱ)、Pb(Ⅱ)、Mn(Ⅱ)、Fe(Ⅲ)、Bi(Ⅲ)等离子在该条件下不被浮选,实现了Co(Ⅱ)与这些离子的定量分离.方法已成功应用于合成水样及工业废水中Co(Ⅱ)的分离测定.

  9. Flotation Separation of Zinc(Ⅱ) by Sodium Chloride-Ammonium Thiocyanate-Cetylpyridinium Chloride-Water System%氯化钠-硫氰酸铵-十六烷基氯化吡啶(钅翁)-水体系浮选分离锌(Ⅱ)

    Institute of Scientific and Technical Information of China (English)

    温欣荣; 涂常青


    研究了氯化钠-硫氰酸铵-十六烷基氯化吡啶(钅翁)-水体系浮选分离锌(Ⅱ)的行为及其与常见离子分离的条件. 结果表明,在1.0 g固体NaCl存在下,当硫氰酸铵(0.1 mol/L)和十六烷基氯化吡啶(钅翁)(0.01 mol/L)溶液的用量均为2.0 mL时,控制pH值为4.0,Zn(Ⅱ)可被该体系浮选,而Cd(Ⅱ)、Co(Ⅱ)、Ni(Ⅱ)、Mn(Ⅱ)、Fe(Ⅱ)、Al(Ⅲ)不被浮选,可实现Zn(Ⅱ)与这些离子的定量分离,对合成水样的定量浮选分离,结果满意.

  10. Toxicological evaluation of ammonium perfluorobutyrate in rats: Twenty-eight-day and ninety-day oral gavage studies (United States)

    Sequential 28-day and 90-day oral toxicity studies were performed in male and female rats with ammonium perfluorobutyrate (NH4+PFBA) at doses up to 150 and 30 mg/kg/d, respectively. Ammonium perfluorooctanoate was used as a comparator at a dose of 30 mg/kg/d in the 28-d study. Fe...

  11. Aerobic physiology of redox-engineered Saccharomyces cerevisiae strains modified in the ammonium assimilation for increased NADPH availability

    DEFF Research Database (Denmark)

    Santos, Maria Margarida M. dos; Thygesen, G.; Kotter, P.;


    Recombinant strains altered in the ammonium assimilation pathways were constructed with the purpose of increasing NADPH availability. The NADPH-dependent glutamate dehydrogenase encoded by GDH1, which accounts for a major fraction of the NADPH consumption during growth on ammonium, was deleted...

  12. 77 FR 65015 - Ammonium Nitrate From Ukraine; Notice of Commission Determination To Conduct a Full Five-year... (United States)


    ... COMMISSION Ammonium Nitrate From Ukraine; Notice of Commission Determination To Conduct a Full Five-year... Nitrate From Ukraine AGENCY: United States International Trade Commission. ACTION: Notice. SUMMARY: The... revocation of the antidumping duty order on ammonium nitrate from Ukraine would be likely to lead...

  13. 27 CFR 555.220 - Table of separation distances of ammonium nitrate and blasting agents from explosives or blasting... (United States)


    ... distances of ammonium nitrate and blasting agents from explosives or blasting agents. 555.220 Section 555... ammonium nitrate and blasting agents from explosives or blasting agents. Table: Department of Defense... Blasting agent Minimum thickness of artificial barricades (in.) 100 3 11 12 100 300 4 14 12 300 600 5 18...

  14. Experimental and theoretical approach to the assessment of stability criteria for safe transport of ammonium nitrate based emulsions

    NARCIS (Netherlands)

    Fabiano, B.; Kersten, R.J.A.; Barbucci, A.; Boers, M.N.


    The safety issues connected to storage and transportation of ammonium nitrate and ammonium nitrate emulsions are to be considered of primary importance, as demonstrated by the Tolouse explosion and various handling and storage accidents in different countries. This paper is focused on the assessment


    Directory of Open Access Journals (Sweden)

    Ivan Osipov


    Full Text Available Procymidone was chosen as the model compound and its phototransformation was followed under sunlight irradiation. The main photodegradation products on silica is 3,5-dichloroaniline and 3,5-diclorphenilisocyanate. The use of ammonium ferric citrate enhances the degradation of the procymidone.

  16. Simultaneous ammonium and phosphate removal by metal inorganic salt modification of natural zeolite


    Ventosa i Capell, Blanca


    Nutrients discharge into receiving waters can cause an environmental problem capable of deathly altering ecosystems. Natural zeolites are low cost resources with ion exchange capacity that have been widely studied. This study deals with simultaneous adsorption of nutrients; viz. ammonium and phosphate, onto different modifications of natural zeolite, clinoptilolite. Research has been focused on the optimization of surface modification procedures to raise clinoptilolite efficien...

  17. [Serodiagnosis of schistosomiasis mansoni using an egg extract semi-purified by precipitation with ammonium sulfate]. (United States)

    Ouattara, S A; Sauneron, M F; Tribouley-Duret, J; Tribouley, J


    Fifty one sera from bilharziosis patients and thirty control sera were examined with a Schistosoma mansoni egg antigen purified by precipitation with ammonium sulphate at 50% saturation. Sensitivity and specificity were good and showed a good correlation with results obtained by MSA1 antigen, but antigen tested is far more easier to prepare than MSA1.

  18. Computer model of hydroponics nutrient solution pH control using ammonium. (United States)

    Pitts, M; Stutte, G


    A computer simulation of a hydroponics-based plant growth chamber using ammonium to control pH was constructed to determine the feasibility of such a system. In nitrate-based recirculating hydroponics systems, the pH will increase as plants release hydroxide ions into the nutrient solution to maintain plant charge balance. Ammonium is an attractive alternative to traditional pH controls in an ALSS, but requires careful monitoring and control to avoid overdosing the plants with ammonium. The primary advantage of using NH4+ for pH control is that it exploits the existing plant nutrient uptake charge balance mechanisms to maintain solution pH. The simulation models growth, nitrogen uptake, and pH of a l-m2 stand of wheat. Simulation results indicated that ammonium-based control of nutrient solution pH is feasible using a proportional integral controller. Use of a 1 mmol/L buffer (Ka = 1.6 x 10(-6)) in the nutrient solution is required.

  19. Antennal and behavioral responses to putrescine and ammonium bicarbonate in the Caribbean fruit fly (Diptera: tephritidae) (United States)

    A current trapping system for Anastrepha fruit flies uses a 2-component lure that emits ammonia and putrescine, both regarded as protein cues. This study used electroantennography and flight tunnel bioassays to quantify olfactory and behavioral responses of A. suspensa to vapors from ammonium bicar...

  20. Effect of cotton pectin content and bioscouring on alkyl-dimethyl-benzyl-ammonium chloride adsorption (United States)

    Our previous research has shown both the rate and the total amount of alkyl-dimethyl-benzyl-ammonium chloride (ADBAC) exhausted from a bulk solution of ADBAC are significantly greater for greige cotton nonwovens than cotton nonwovens that have been both scoured and bleached. The presence of pectin ...

  1. Sugar- and nitrogen-dependent regulation of an Amanita muscaria phenylalanine ammonium lyase gene. (United States)

    Nehls, U; Ecke, M; Hampp, R


    The cDNA of a key enzyme of secondary metabolism, phenylalanine ammonium lyase, was identified for an ectomycorrhizal fungus by differential screening of a mycorrhizal library. The gene was highly expressed in hyphae grown at low external monosaccharide concentrations, but its expression was 30-fold reduced at elevated concentrations. Gene repression was regulated by hexokinase.

  2. Aqueous Ammonia or Ammonium Hydroxide? Identifying a Base as Strong or Weak (United States)

    Sanger, Michael J.; Danner, Matthew


    When grocery stores sell solutions of ammonia, they are labeled "ammonia"; however, when the same solution is purchased from chemical supply stores, they are labeled "ammonium hydroxide". The goal of this experiment is for students to determine which name is more appropriate. In this experiment, students use several different experimental methods…

  3. Hydrogen production and ammonium recovery from urine by a Microbial Electrolysis Cell

    NARCIS (Netherlands)

    Kuntke, P.; Sleutels, T.H.J.A.; Saakes, M.; Buisman, C.J.N.


    We investigated the use of a Microbial Electrolysis Cell (MEC) for the ammonium removal, COD removal and hydrogen production from five times diluted urine. During operation with a batch cathode, a current density of 23.07 +/- 1.15 A m(-2) was achieved corresponding to a hydrogen production rate of 4

  4. Mechanism studies on nitrogen removal when treating ammonium-rich leachate by sequencing batch biofilm reactor

    Institute of Scientific and Technical Information of China (English)

    XU Zhengyong; YANG Zhaohui; ZENG Guangming; XIAO Yong; DENG Jiuhua


    The nitrogen removal mechanism was studied and analyzed when treating the ammonium-rich landfill leachate by a set of sequencing batch biofilm reactors(SBBRs),which was designed independently.At the liquid temperature of(32±0.4)℃,and after a 58-days domestication period and a 33-days stabilization period.the efficiency of ammonium removal in the SBBR went up to 95%.Highly frequent intermittent aeration suppressed the activity of nitratebacteria.and also eliminated the influence on the activity of anaerobic ammonium oxidation(ANAMMOX)bacteria and nitritebacteria.This influence was caused by the accumulation of nitrous acid and the undulation of pH.During the aeration stage,the concentration of dissolved oxygen was controlled at 1.2-1.4 mg/L.The nitritebacteria became dominant and nitrite accumulated gradually.During the anoxic stage,along with the concentration debasement of the dissolved oxygen,ANAMMOX bacteria became dominant;then,the nitrite that was accumulated in the aeration stage was wiped off with ammonium simultaneously.

  5. Adsorption of alkyl-dimethyl-benzyl-ammonium chloride on differently pretreated nonwoven cotton substrate (United States)

    The adsorption of alkyl-dimethyl-benzyl-ammonium chloride (ADBAC), a cationic surfactant commonly employed as an antimicrobial agent, on greige, alkaline scoured, and bleached nonwoven cotton fabrics was investigated at varying surfactant concentrations and liquor ratios using UV-vis absorption spec...

  6. Ammonium Chloride Promoted Palladium-Catalyzed Ullmann Coupling of Aryl Bromide

    Institute of Scientific and Technical Information of China (English)

    李金恒; 梁云; 刘文杰; 唐石; 谢叶香


    In water, ammonium chloride was found to promote palladium-catalyzed Ullmann coupling reactions of aryl bromides. In the presence of Pd/C, zinc, NH4Cl, and water, coupling of various aryl bromides was carried out smoothly to afford the corresponding homocoupling products in moderate yields.

  7. Effect of Ammonium Molybdate Inhibition on Corrosion Behaviour of Mild Steel in Chloride and Sulphide Media

    Directory of Open Access Journals (Sweden)

    Ayo S. Afolabi


    Full Text Available The corrosion inhibition of mild steel in 3.0 M sodium chloride and 0.5 M sodium sulphide using various concentrations of ammonium molybdate was investigated in this work. The inhibition effect of this reagent in these media was monitored by weight loss and pH measurements. The analyses of the weight loss results showed that the corrosion susceptibility of mild steel in 3.0 M sodium chloride was more pronounced than in 0.5 M of sodium sulphide due to the aggressive chloride ions in the former and the weak nature of the latter. Ammonium molybdate produced a better inhibition performance of mild steel in 0.5 M sodium suphide than in 3.0 M sodium chloride medium and the higher the concentration of ammonium molybdate the more the inhibition performance on mild steel in the media studied. Optimum inhibition was obtained at 2.5 M ammonium molybdate in both media. The pH values in chloride medium remained acidic throughout the exposure period while those of sulphide medium shifted to alkaline region with exposure time; an effect that was traceable to higher inhibition obtained in the latter medium.

  8. Lessons to be learned from an analysis of ammonium nitrate disasters in the last 100 years

    Energy Technology Data Exchange (ETDEWEB)

    Pittman, William; Han, Zhe; Harding, Brian; Rosas, Camilo; Jiang, Jiaojun; Pineda, Alba; Mannan, M. Sam, E-mail:


    Highlights: • Root causes and contributing factors from ammonium nitrate incidents are categorized into 10 lessons. • The lessons learned from the past 100 years of ammonium nitrate incidents can be used to improve design, operation, and maintenance procedures. • Improving organizational memory to help improve safety performance. • Combating and changing organizational cultures. - Abstract: Process safety, as well as the safe storage and transportation of hazardous or reactive chemicals, has been a topic of increasing interest in the last few decades. The increased interest in improving the safety of operations has been driven largely by a series of recent catastrophes that have occurred in the United States and the rest of the world. A continuous review of past incidents and disasters to look for common causes and lessons is an essential component to any process safety and loss prevention program. While analyzing the causes of an accident cannot prevent that accident from occurring, learning from it can help to prevent future incidents. The objective of this article is to review a selection of major incidents involving ammonium nitrate in the last century to identify common causes and lessons that can be gleaned from these incidents in the hopes of preventing future disasters. Ammonium nitrate has been involved in dozens of major incidents in the last century, so a subset of major incidents were chosen for discussion for the sake of brevity. Twelve incidents are reviewed and ten lessons from these incidents are discussed.

  9. Erythrocyte lysis in isotonic solution of ammonium chloride: Theoretical modelling and experimental verification

    NARCIS (Netherlands)

    Chernyshev, A.V.; Tarasov, P.A.; Semianov, K.A.; Nekrasov, V.M.; Hoekstra, A.G.; Maltsev, V.P.


    A mathematical model of erythrocyte lysis in isotonic solution of ammonium chloride is presented in frames of a statistical approach. The model is used to evaluate several parameters of mature erythrocytes (volume, surface area, hemoglobin concentration, number of anionic exchangers on membrane, ela

  10. Epoxidation of Alkenes with Aqueous Hydrogen Peroxide and Quaternary Ammonium Bicarbonate Catalysts

    DEFF Research Database (Denmark)

    Mielby, Jerrik Jørgen; Kegnæs, Søren


    A range of solid and liquid catalysts containing bicarbonate anions were synthesised and tested for the epoxidation of alkenes with aqueous hydrogen peroxide. The combination of bicarbonate anions and quaternary ammonium cations opens up for new catalytic systems that can help to overcome challen...

  11. Spatial distribution and inhibition by ammonium of methane oxidation in intertidal freshwater marshes

    NARCIS (Netherlands)

    Van der Nat, F.J.; de Brouwer, J.F.C.; Middelburg, J.J.; Laanbroek, H.J.


    In two intertidal marshes, the vertical distribution in the sediment and inhibition by ammonium of methane oxidation were investigated by slurry incubation experiments. The two sites differ in their dominant vegetation type, i.e., reed and bulrush, and in their heights above sea level. The reed site

  12. The association effect of quaternary ammonium salt on carboxymethyl cellulose and its analytical applications. (United States)

    Wang, Yanhua; Gao, Chanjuan; Yang, Shengke


    Sodium carboxymethyl cellulose (CMC) has been extensively used in petroleum, geology, common household chemicals, food, medicine and other industries, owing to its excellent water-soluble, emulsifying, water retention and film forming properties. It is known as 'industrial monosodium glutamate'. However, the research of the test method on CMC is far behind the research of its actual application value. This study showed that, weak acid or weak basic medium, the carboxyl groups dissociated from CMC, existing as a big negative ion, which can form ion-association complexes with some quaternary ammonium cations through electrostatic and hydrophobic interactions. The absorption spectrum changes and Triton-X100 can increase the sensitivity of the system. The maximum absorption wavelengths are, respectively, about 256 nm for dodecyl trimethyl ammonium bromide (LTAB), 244 nm for tetradecyltrimethyl ammonium bromide (TTAB) and 240 nm for cetyltrimethyl ammonium bromide (CTAB) with CMC. The reactions show very high sensitivities and the maximum molar absorption coefficients are 1.10 × 10(4) L/(mol·cm) for LTAB system, 1.24 × 10(6) L/(mol·cm) for TTAB system and 1.78 × 10(6) L/(mol·cm) for CTAB system. This method is simple and rapid, and can be applied for the spectrophotometric determination of trace CMC in the supernatant of centrifuged drilling mud.

  13. Different virucidal activities of hyperbranched quaternary ammonium coatings on poliovirus and influenza virus

    NARCIS (Netherlands)

    Tuladhar, E.; Koning, M.C. de; Fundeanu, I.; Beumer, R.; Duizer, E.


    Virucidal activity of immobilized quaternary ammonium compounds (IQACs) coated onto glass and plastic surfaces was tested against nveloped influenza A (H1N1) virus and nonenveloped poliovirus Sabin1. The IQACs tested were virucidal against the influenza virus within 2 min, but no virucidal effect ag

  14. Long alkyl chain bis-quaternary ammonium-based ionic liquids as biologically active xanthene dyes

    Energy Technology Data Exchange (ETDEWEB)

    Pernak, Juliusz; Swierczynska, Anna; Walkiewicz, Filip [Poznan Univ. of Technology, Poznan (Poland). Faculty of Chemical Technology; Krystkowiak, Ewa [A. Mickiewicz University, Poznan, (Poland). Faculty of Chemistry; Maciejewski, Andrzej [A. Mickiewicz University, Poznan (Poland). Centre of Ultrafast Laser Spectroscopy


    New examples of air- and moisture-stable, hydrophobic and hydrophilic bis-quaternary ammonium derived ionic liquids have been prepared. These ionic liquids have been proposed to act as biological active dyes with characteristic unique physicochemical properties, providing alternatives to some conventional anionic xanthene dyes such as eosine Y, fluorescein and erythrosine. (author)

  15. Ammonium tetrathiomolybdate as a water-soluble and slow-release hydrogen sulfide donor. (United States)

    Xu, Shi; Yang, Chun-Tao; Meng, Fu-Hui; Pacheco, Armando; Chen, Li; Xian, Ming


    Ammonium tetrathiomolybdate (TTM) was found to be a slow hydrogen sulfide (H2S) releasing agent. Its H2S generation capability in aqueous solutions was confirmed by UV-vis and fluorescence assays. TTM also showed H2S-like cytoprotective effects in hydrogen peroxide (H2O2)-induced oxidative damage in HaCaT cells.

  16. Ammonium sulphate fertiliser increases larval populations of Anopheles arabiensis and culicine mosquitoes in rice fields

    DEFF Research Database (Denmark)

    Mutero, C M; Ng'ang'a, P N; Wekoyela, P;


    Field experiments were conducted in central Kenya, to study the effect of ammonium sulphate fertiliser ((NH(4))(2)SO(4)) on mosquito larval populations in rice fields. The experiments used a complete randomised block design having four blocks with two experimental ponds per block...... in rice fields, thereby making them visually more attractive for egg-laying by An. arabiensis and culicine mosquitoes....

  17. Ammonium metavanadate: A novel catalyst for synthesis of 2-substituted benzimidazole derivatives

    Institute of Scientific and Technical Information of China (English)

    Ganesh R. Jadhav; Mohammad U. Shaikh; Rajesh P. Kale; Charansingh H. Gill


    Ammonium metavanadate (10 tool%) was found to be a useful catalyst for the synthesis of various 2-substituted aryl benzimidazoles. It was used as an oxidizing agent for the condensation of o-pbenylenediamine with different substituted aryl aldehydes at room temperature in ethanol. The method was proved to be simple, convenient and the product was isolated with good yields (79-91%).

  18. Synthesis and Spectroscopic Characterisation of N-Alkyl Quaternary Ammonium Salts Typical Precursors of Cyanines


    Almeida, P; Reis, L. V.; SANTOS, P.F.; Ramos, S. S.; Pardal, A. C.


    The synthesis and spectroscopic characterisation of some representative N-alkylsubstituted quaternary ammonium salts derived from benzothiazole, benzoxazole, benzoselenazole, indole and quinoline are described. These heterocyclic salts, bearing an activated methyl group in the 2-position in relation to the nitrogen atom and N-methyl, -pentyl, -hexyl and -decyl chains, are typical precursors of cyanine dyes.

  19. Synthesis and Spectroscopic Characterisation of N-Alkyl Quaternary Ammonium Salts Typical Precursors of Cyanines

    Directory of Open Access Journals (Sweden)

    P. Almeida


    Full Text Available The synthesis and spectroscopic characterisation of some representative N-alkylsubstituted quaternary ammonium salts derived from benzothiazole, benzoxazole, benzoselenazole, indole and quinoline are described. These heterocyclic salts, bearing an activated methyl group in the 2-position in relation to the nitrogen atom and N-methyl, -pentyl, -hexyl and -decyl chains, are typical precursors of cyanine dyes.

  20. Chiral ammonium betaine-catalyzed asymmetric Mannich-type reaction of oxindoles

    Directory of Open Access Journals (Sweden)

    Masahiro Torii


    Full Text Available A highly diastereo- and enantioselective Mannich-type reaction of 3-aryloxindoles with N-Boc aldimines was achieved under the catalysis of axially chiral ammonium betaines. This catalytic method provides a new tool for the construction of consecutive quaternary and tertiary stereogenic carbon centers on biologically intriguing molecular frameworks with high fidelity.

  1. Continuous culture enrichments of ammonia-oxidizing bacteria at low ammonium concentrations

    NARCIS (Netherlands)

    Bollmann, A.; Laanbroek, H.J.


    Until now enrichments of ammonia-oxidizing bacteria from natural ammonium-limited environments have been performed mainly in the presence of much higher ammonia concentrations than those present in the natural environment and many have resulted in the enrichment and isolation of environmentally less

  2. Thermodynamic Analysis of Allosteric and Chelate Cooperativity in Di- and Trivalent Ammonium/Crown-Ether Pseudorotaxanes. (United States)

    Nowosinski, Karol; von Krbek, Larissa K S; Traulsen, Nora L; Schalley, Christoph A


    A detailed thermodynamic analysis of the axle-wheel binding in di- and trivalent secondary ammonium/[24]crown-8 pseudorotaxanes is presented. Isothermal titration calorimetry (ITC) data and double mutant cycle analyses reveal an interesting interplay of positive as well as negative allosteric and positive chelate cooperativity thus providing profound insight into the effects governing multivalent binding in these pseudorotaxanes.

  3. Synthesis of hierarchical zeolites using an inexpensive mono-quaternary ammonium surfactant as mesoporogen. (United States)

    Zhu, Xiaochun; Rohling, Roderigh; Filonenko, Georgy; Mezari, Brahim; Hofmann, Jan P; Asahina, Shunsuke; Hensen, Emiel J M


    A simple amphiphilic surfactant containing a mono-quaternary ammonium head group (N-methylpiperidine) is effective in imparting substantial mesoporosity during synthesis of SSZ-13 and ZSM-5 zeolites. Highly mesoporous SSZ-13 prepared in this manner shows greatly improved catalytic performance in the methanol-to-olefins reaction compared to bulk SSZ-13.

  4. Biomass burning in eastern Europe during spring 2006 caused high deposition of ammonium in northern Fennoscandia

    DEFF Research Database (Denmark)

    Karlsson, Per Erik; Ferm, Martin; Pihl Karlsson, Gunilla


    High air concentrations of ammonium were detected at low and high altitude sites in Sweden, Finland and Norway during the spring 2006, coinciding with polluted air from biomass burning in eastern Europe passing over central and northern Fennoscandia. Unusually high values for throughfall deposition...

  5. Hydrolysis of cellulose catalyzed by quaternary ammonium perrhenates in 1-allyl-3-methylimidazolium chloride. (United States)

    Wang, Jingyun; Zhou, Mingdong; Yuan, Yuguo; Zhang, Quan; Fang, Xiangchen; Zang, Shuliang


    Quaternary ammonium perrhenates were applied as catalyst to promote the hydrolysis of cellulose in 1-allyl-3-methylimidazolium chloride ([Amim]Cl). The quaternary ammonium perrhenates displayed good catalytic performance for cellulose hydrolysis. Water was also proven to be effective to promote cellulose hydrolysis. Accordingly, 97% of total reduced sugar (TRS) and 42% of glucose yields could be obtained under the condition of using 5mol% of tetramethyl ammonium perrhenate as catalyst, 70μL of water, ca. 0.6mmol of microcrystalline cellulose (MCC) and 2.0g of [Amim]Cl as solvent under microwave irradiation for 30min at 150°C (optimal conditions). The influence of quaternary ammonium cation on the efficiency of cellulose hydrolysis was examined based on different cation structures of perrhenates. The mechanism on perrhenate catalyzed cellulose hydrolysis is also discussed, whereas hydrogen bonding between ReO4 anion and hydroxyl groups of cellulose is assumed to be the key step for depolymerization of cellulose.

  6. Radiolysis of aqueous solutions of ammonium bicarbonate over a large dose range

    DEFF Research Database (Denmark)

    Draganic, Z.D.; Negrón-Mendoza, A.; Sehested, K.;


    Oxygen-free aqueous solutions of 0.05 mol dm-3 ammonium and sodium bicarbonate were studied after receiving various doses of Co-60 gammas (0.01-400 kGy) or 0.5-20 Gy pulses of 10 Mev electrons. Formate and oxalate were found to be the main radiolytic products, in addition to trace amounts of form...

  7. Synthesis of quarternary ammonium salts with dithiocarbamate moiety and their antifungal activities against Helminthosporium oryzae

    Indian Academy of Sciences (India)

    Mandeep Singh; Anita Garg; Anjali Sidhu; Vineet Kumar


    Quaternary ammonium salts containing dithiocarbamate moiety were synthesized and evaluated for their antifungal activities against Helminthosporium oryzae. All the synthesized compounds showed moderate to promising fungitoxicity against the test. Some of the synthesized compounds inflicted antifungal activity greater than the standard fungicide.

  8. Present and past contribution of anaerobic ammonium oxidation to nitrogen cycling as revealed by ladderane lipids

    NARCIS (Netherlands)

    Jaeschke, A.


    Anammox, the anaerobic oxidation of ammonium to dinitrogen gas with nitrite as the electron acceptor, constitutes a novel route to convert biologically available (fixed) nitrogen to gaseous N2. This process is mediated by specific bacteria belonging to the Planctomycetes that were initially discover

  9. Present and past contribution of anaerobic ammonium oxidation to nitrogen cycling as revealed by ladderane lipids

    NARCIS (Netherlands)

    Jaeschke, Andrea


    Abstract Anammox, the anaerobic oxidation of ammonium to dinitrogen gas with nitrite as the electron acceptor, constitutes a novel route to convert biologically available (fixed) nitrogen to gaseous N2. This process is mediated by specific bacteria belonging to the Planctomycetes that were initially

  10. Vigna subterranea ammonium transporter gene (VsAMT1: Some bioinformatics insights

    Directory of Open Access Journals (Sweden)

    Adewole T. Adetunji


    Full Text Available Ammonium transporters (AMTs play a role in the uptake of ammonium, the form in which nitrogen is preferentially absorbed by plants. Vigna subterranea (VsAMT1 and Solanum tuberosum (StAMT1 AMT1s were characterized using molecular biology and bioinformatics methods. AMT1-specific primers were designed and used to amplify the AMT1 internal regions. Nucleotide sequencing, alignment and phylogenetic analysis assigned VsAMT1 and StAMT1 to the AMT1 family. The deduced amino acid sequences showed that VsAMT1 is 92% and 89% similar to Phaseolus vulgaris PvAMT1.1 and Glycine max AMT1 respectively, while StAMT1 is 92% similar to Solanum lycopersicum LeAMT1.1, and correspond to the 5th–10th trans-membrane domains. Residues VsAMT1 D23 and StAMT1 D15 are predicted to be essential for ammonium transport, while mutations of VsAMT1 W1A-L and S87A and StAMT1 S76A may further enhance ammonium transport. In addition to nitrogen uptake from the roots, VsAMT1 may also contribute to interactions with rhizobia.

  11. Interaction between Ammonium Toxicity and Green Tide Development Over Seagrass Meadows

    DEFF Research Database (Denmark)

    Marin, Francisco Moreno; Vergara, Juan J.; Pérez-Llorens, J. Lucas;


    macroalgae that coexists with seagrasses under eutrophic conditions, can alleviate the harmful effects of eutrophication on seagrasses by reducing ammonium concentrations in the seawater to non-toxic levels because such algae have a very large capacity to take up inorganic nutrients. We studied therefore how...

  12. Deciphering the molecular basis of ammonium uptake and transport in maritime pine. (United States)

    Castro-Rodríguez, Vanessa; Assaf-Casals, Iman; Pérez-Tienda, Jacob; Fan, Xiaorong; Avila, Concepción; Miller, Anthony; Cánovas, Francisco M


    Ammonium is the predominant form of inorganic nitrogen in the soil of coniferous forests. Despite the ecological and economic importance of conifers, the molecular basis of ammonium uptake and transport in this group of gymnosperms is largely unknown. In this study, we describe the functional characterization of members of the AMT gene family in Pinus pinaster: PpAMT1.1, PpAMT1.2 and PpAMT1.3 (subfamily 1) and PpAMT2.1 and PpAMT2.3 (subfamily 2). Our phylogenetic analysis indicates that in conifers, all members of the AMT1 subfamily evolved from a common ancestor that is evolutionarily related to the ancient PpAMT1.2 gene. Individual AMT genes are developmentally and nutritionally regulated, and their transcripts are specifically distributed in different organs. PpAMT1.3 was predominantly expressed in the roots, particularly during N starvation and mycorrhizal interaction, whereas PpAMT2.3 was preferentially expressed in lateral roots. Immunolocalization studies of roots with varied nitrogen availability revealed that PpAMT1 and PpAMT2 proteins play complementary roles in the uptake of external ammonium. Heterologous expression in yeast and Xenopus oocytes revealed that the AMT genes encode functional transporters with different kinetics and with different capacities for ammonium transport. Our results provide new insights on how nitrogen is acquired and transported in conifers.

  13. Different species of basil need different ammonium to nitrate ratio in hydroponics' system

    Directory of Open Access Journals (Sweden)



    Full Text Available Basil is a very important medicinal plant and culinary spice, and is marketed fresh, dried or frozen. In crop nutrition, nitrogen is essential for plant growth and as a macro-element, is part of the proteins’ structure and participates in the metabolic processes involved in the synthesis and energy transfer. It has been shown that a balance between ammonium and nitrate favors plant growth and that the degree of benefit varies among crops. This study was conducted to evaluate the growth of two varieties of basil in function of four nutrient solutions containing different NH4+/NO3- ratios. Results showed that different variety response differently to nutrient solution. Although the highest yield in both varieties (sweet and purple was obtained when fed by nutrient solution without ammonium but their response on quality indices were different due to nitrate ammonium ratio in nutrient solutions. The highest total phenol content of sweet and purple basil was 92 and 100 mg gallic acid equivalent per gram of dry weight respectively, while the highest antioxidant capacity was obtained in purple variety grown in nutrient solution 2 (NH4+:1/NO3:4 and the lowest value were related to sweet variety with the same nutrient solution. Moderate content of total nitrogen can be suitable for sweet variety while for purple variety nutrient solution with low amount of ammonium can be more suitable.

  14. 40 CFR 721.9075 - Quaternary ammonium salt of fluorinated alkylaryl amide. (United States)


    ... fluorinated alkylaryl amide. 721.9075 Section 721.9075 Protection of Environment ENVIRONMENTAL PROTECTION... amide. (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified generically as quaternary ammonium salt of fluorinated alkylaryl amide (PMN No. P-92-688)...

  15. Superoxide Anion Radical Scavenging Ability of Quaternary Ammonium Salt of Chitosan

    Institute of Scientific and Technical Information of China (English)

    Xiao Yan ZHU; Jian Min WU; Zhi Shen JIA


    A series of N-alkyl or N-aryl chitosan quaternary ammonium salt were prepared using 96% deacetylated chitosan. Their scavenging activities against superoxide anion radical were investigated by chemiluminescence. The IC50 values of these compounds range from 280 to 880 μg/mL, which should be attributed to their different substitutes.

  16. Production of Ammonium Lactate by Fed-batch Fermentation of Rhizopus oryzae from Corncob Hydrolysate

    Institute of Scientific and Technical Information of China (English)

    BAI Dong-mei; LI Shi-zhong; LIN Fang-qian


    L- (+)-Lactic acid production from corncob hydrolysate as a cheap carbohydrate source by fed-batch fermentation of Rhizopus oryzae HZS6 was studied. After 96 h of fermentation in a 5 L fermentor, the final concentration of ammonium L-(+)-lactate, average productivity(based on initial xylose concentration) and max(+)-lactate was 98.8%.

  17. X-ray powder diffraction data and unit cells of ammonium paratungstate tetrahydrate

    NARCIS (Netherlands)

    Put, J.W. van; Verkroost, T.W.; Sonneveld, E.J.


    X-Ray powder diffraction data and unit cell parameters of industrially produced, as well as bench scale prepared, ammonium paratungstate tetrahydrate are reported and compared with current Powder Data file (PDF) (1989) patterns. A least-squares refinement resulted in two slightly different unit cell

  18. Recent results of EPR and Moessbauer investigations on lattice dynamics in ammonium sulphate

    CERN Document Server

    Grecu, M N; Grecu, V V


    Recent results of the lattice dynamics investigation on ammonium sulfate are reported based on recent experiments carried out using using the non-destructive experimental technique of EPR and NGR. The main results confirm the presence and the contribution of a soft mode, which accompanied the paraferroelectric phase transition in the investigated crystal. (authors)

  19. Synthesis and biological activity of quaternary ammonium salt-type agents containing cholesterol and terpenes. (United States)

    Novotná, Eva; Waisser, Karel; Kuneš, Jiří; Palát, Karel; Buchta, Vladimír; Stolaříková, Jiřina; Beckert, Rainer; Wsól, Vladimír


    New quaternary ammonium salt-type compounds with lipophilic cholesterol and terpene moieties were synthesized. The compounds showed promising antibacterial and antimycobacterial activities. Those compounds containing the cholesterol moiety showed significant activity against Staphylococcus aureus, Staphylococcus epidermidis, and Enterococcus faecium. On the contrary, the antimycobacterial activity increased with the presence of the terpene unit in the molecule.

  20. (Methyl)ammonium transport in the nitrogen-fixing bacterium Azospirillum brasilense. (United States)

    Van Dommelen, A; Keijers, V; Vanderleyden, J; de Zamaroczy, M


    An ammonium transporter of Azospirillum brasilense was characterized. In contrast to most previously reported putative prokaryotic NH4+ transporter genes, A. brasilense amtB is not part of an operon with glnB or glnZ which, in A. brasilense, encode nitrogen regulatory proteins PII and PZ, respectively. Sequence analysis predicts the presence of 12 transmembrane domains in the deduced AmtB protein and classifies AmtB as an integral membrane protein. Nitrogen regulates the transcription of the amtB gene in A. brasilense by the Ntr system. amtB is the first gene identified in A. brasilense whose expression is regulated by NtrC. The observation that ammonium uptake is still possible in mutants lacking the AmtB protein suggests the presence of a second NH4+ transport mechanism. Growth of amtB mutants at low ammonium concentrations is reduced compared to that of the wild type. This suggests that AmtB has a role in scavenging ammonium at low concentrations.

  1. Towards a General Understanding of Carbonyl-Stabilised Ammonium Ylide-Mediated Epoxidation Reactions. (United States)

    Novacek, Johanna; Roiser, Lukas; Zielke, Katharina; Robiette, Raphaël; Waser, Mario


    The key factors for carbonyl-stabilised ammonium ylide-mediated epoxidation reactions were systematically investigated by experimental and computational means and the hereby obtained energy profiles provide explanations for the observed experimental results. In addition, we were able to identify the first tertiary amine-based chiral auxiliary that allows for high enantioselectivities and high yields for such epoxidation reactions.

  2. Effect of Potassium on Ammonium Fixation and Adsorption of Vermiculite in Binary and Ternary Systems

    Institute of Scientific and Technical Information of China (English)


    Ammonium fixation and adsorption experiments were conducted to study the effect of potassium on ammonium fixation into interlayer of vermiculite and ammonium adsorption at the surface of vermiculite both in the binary (NH4+-Ca2+) and ternary (NH4+-K+-Ca2+) systems. In the ammonium fixation experiment, 5 mmol NH4+ kg-1 was added alone, or after, before or simultaneously with 5 mmol K+ kg-1 to the vermiculite (vermiculite:solution = 1:1), and the incubation was conducted for 3 days under constant 20℃. In the adsorption experiment, after addition of 10 mmol Ca2+ L-1 as matrix ions, either NH4+ alone with a concentration series from 0.1 to 5.0 mmol NH4+ L-1 (binary exchange system of NH4+ and Ca2+) or NH4+ together with 5 mmol K+ L-1 (ternary exchange system of NH4+, K+ and Ca2+) was added to vermiculite at a vermiculite to solution ratio of 1:10 for 24-h equilibrium. The results of the fixation experiment showed that the presence of K+ increased NH4+ fixation for all the treatments, regardless of the addition orders. For ammonium adsorption a linear relationship between activity ratios of NH4+ to Ca2+ and Mg2+ in the equilibrium solutions (ARNH4) and increases of exchangeable NH4+ at the surface of vermiculite after 24- h equilibrium (ΔEx-NH4+) was shown for almost the whole concentration ranges tested. Compared with the binary system, the slope of the curve of the ternary system was steeper, indicating a more intensive adsorption of NH4+ in the presence of K+. It was demonstrated that K+ did not reduce the ammonium fixation into the interlayer and ammonium adsorption at the surface of vermiculite, which indicated that, under the experimental conditions of this study, K+ did neither occupy the sites for NH4+-fixation in the interlayer nor the sites for NH4+-adsorption at the surface of vermiculite.

  3. Bis[N-(2-aminoethylethane-1,2-diamine-κ3N,N′,N′′]copper(II tris[diamminetetrakis(thiocyanato-κNchromate(III] thiocyanate dimethyl sulfoxide tetradecasolvate monohydrate

    Directory of Open Access Journals (Sweden)

    Vitalina M. Nikitina


    Full Text Available The ionic title complex, [Cu(C4H13N32]2[Cr(NCS4(NH32]3(NCS·14C2H6OS·H2O, consists of complex [Cu(dien2]2+ cations [dien is N-(2-aminoethylethane-1,2-diamine], complex [Cr(NCS4(NH32]− anions, an NCS− counter-anion and uncoordinated dimethyl sulfoxide (DMSO and water solvent molecules. One of the Cr atoms lies on an inversion center, while the second Cr atom and the Cu atom lie in general positions. The thiocyanate counter-anion and water molecule are disordered over two positions close to an inversion center. There are several types of hydrogen-bond interactions present in the title compound, which connect the complex cations and anions into bulky [Cu2Cr3] polynuclear species. The four NH3 groups of the complex anions and six bridging DMSO O atoms link the three complex anions via hydrogen bonding into the anionic polynuclear species [Cr(NCS4(NH32]3·6DMSO. The last one is connected by four bridging DMSO O atoms with the two complex copper cations through N—H... O hydrogen bonds between the terminal NH3 groups of the anionic polynuclear species and the NH and NH2 groups of the dien ligand. One additional DMSO molecule is connected via hydrogen bonding to one of the terminal NH3 groups of the anionic polynuclear species. Another DMSO molecule is connected via hydrogen bonding to each Cu(dien2]2+ cation.

  4. Syntheses, Crystal Structures and Fluorescence of Cadmium(Ⅱ) Coordination Polymers with Pyrazine-1,4-dioxide, 2-Methylpyrazine-1,4-dioxide and Thiocyanate as Mixed Bridge Ligands

    Institute of Scientific and Technical Information of China (English)

    SHI Jing-Min; ZHANG Feng-Xia; ZHANG Xia; XU Hai-Yan; LIU Lian-Dong; MA Jian-Ping


    Two Cd(Ⅱ) coordination polymers have been synthesized with pyrazine-1,4-dioxide(L1), 2-methylpyrazine-1,4-dioxide (L2), and thiocyanate anion as mixed bridge ligands. Crystal data for complex 1 [Cd(μ13-SCN-)2(L1)]n: monoclinic system, space group P21/n with a =6.8342(11), b = 14.349(2), c = 10.5443(16) (A), β = 98.534(2)°, V = 1022.5(3) (A)3, Z = 4,C6H4CdN4O2S2, Mr = 340.65, Dc. = 2.213 g/cm3, F(000) = 656 andμ = 2.527 mm-1; and those for2: triclinic system, space group P1 with a = 7.877(3), b = 8.693(3), c = 8.754(3) (A), α =102.297(6), β= 102.464(6), γ= 98.480(6)°, V = 560.0(3) (A)3, Z = 2, C7H6CdN4O2S2, Mr = 354.68,Dc = 2.103 g/cm3, F(000) = 344 and μ = 2.311 mm-1. 1 shows a three-dimensional network structure, and along the c direction a one-dimensional chain is constructed by the coordination of Cd(Ⅱ) ions withμ1,3-SCN- ligands, and the L1 bridging ligands made the chains connect each other leading to the formation of a three-dimensional structure. For 2, the one-dimensional chains along the b axis are generated by the coordination of L2 bridging ligands with Cd(Ⅱ) ions, and the chains are further joined byμ1,3-SCN- bridging ligands forming a two-dimensional sheet structure on the (1 0 -1) plane. Both complexes 1 and 2 exhibit strong fluorescence emission.

  5. Kinetic Constants for Biological Ammonium and Nitrite Oxidation Processes Under Sulfide Inhibition. (United States)

    Bejarano-Ortiz, Diego Iván; Huerta-Ochoa, Sergio; Thalasso, Frédéric; Cuervo-López, Flor de María; Texier, Anne-Claire


    Inhibition of nitrification by sulfide was assessed using sludge obtained from a steady-state nitrifying reactor. Independent batch activity assays were performed with ammonium and nitrite as substrate, in order to discriminate the effect of sulfide on ammonium and nitrite oxidation. In the absence of sulfide, substrate affinity constants (K S,NH4  = 2.41 ± 0.11 mg N/L; K s, NO2  = 0.74 ± 0.03 mg N/L) and maximum specific rates (q max,NH4  = 0.086 ± 0.008 mg N/mg microbial protein h; q max,NO2  = 0.124 ± 0.001 mg N/mg microbial protein h) were determined. Inhibition of ammonium oxidation was no-competitive (inhibition constant (K i , NH4 ) of 2.54 ± 0.12 mg HS(-)-S/L) while inhibition of nitrite oxidation was mixed (competitive inhibition constant (K' i , NO2 ) of 0.22 ± 0.03 mg HS(-)-S/L and no-competitive inhibition constant (K i , NO2 ) of 1.03 ± 0.06 mg HS(-)-S/L). Sulfide has greater inhibitory effect on nitrite oxidation than ammonium oxidation, and its presence in nitrification systems should be avoided to prevent accumulation of nitrite. By simulating the effect of sulfide addition in a continuous nitrifying reactor under steady-state operation, it was shown that the maximum sulfide concentration that the sludge can tolerate without affecting the ammonium consumption efficiency and nitrate yield is 1 mg HS(-)-S/L.

  6. Ammonium excretion and oxygen respiration of tropical copepods and euphausiids exposed to oxygen minimum zone conditions

    Directory of Open Access Journals (Sweden)

    R. Kiko


    Full Text Available Calanoid copepods and euphausiids are key components of marine zooplankton communities worldwide. Most euphausiids and several copepod species perform diel vertical migrations (DVMs that contribute to the export of particulate and dissolved matter to midwater depths. In vast areas of the global ocean, and in particular in the eastern tropical Atlantic and Pacific, the daytime distribution depth of many migrating organisms corresponds to the core of the oxygen minimum zone (OMZ. At depth, the animals experience reduced temperature and oxygen partial pressure (pO2 and an increased carbon dioxide partial pressure (pCO2 compared to their near-surface nighttime habitat. Although it is well known that low oxygen levels can inhibit respiratory activity, the respiration response of tropical copepods and euphausiids to relevant pCO2, pO2 and temperature conditions remains poorly parameterized. Further, the regulation of ammonium excretion at OMZ conditions is generally not well understood. It was recently estimated that DVM-mediated ammonium supply considerably fuels bacterial anaerobic ammonium oxidation – a major loss process for fixed nitrogen in the ocean. These estimates were based on the implicit assumption that hypoxia or anoxia in combination with hypercapnia (elevated pCO2 does not result in a downregulation of ammonium excretion. Here we show that exposure to OMZ conditions can result in strong depression of respiration and ammonium excretion in calanoid copepods and euphausiids from the Eastern Tropical North Atlantic and the Eastern Tropical South Pacific. These physiological responses need to be taken into account when estimating DVM-mediated fluxes of carbon and nitrogen into OMZs.

  7. Ammonium nitrate fertiliser production based on biomass - environmental effects from a life cycle perspective. (United States)

    Ahlgren, Serina; Baky, Andras; Bernesson, Sven; Nordberg, Ke; Norén, Olle; Hansson, Per-Anders


    Ammonium nitrate and calcium ammonium nitrate are the most commonly used straight nitrogen fertilisers in Europe, accounting for 43% of the total nitrogen used for fertilisers. They are both produced in a similar way; carbonate can be added as a last step to produce calcium ammonium nitrate. The environmental impact, fossil energy input and land use from using gasified biomass (cereal straw and short rotation willow (Salix) coppice) as feedstock in ammonium nitrate production were studied in a cradle-to-gate evaluation using life cycle assessment methodology. The global warming potential in the biomass systems was only 22-30% of the impact from conventional production using natural gas. The eutrophication potential was higher for the biomass systems due to nutrient leaching during cultivation, while the acidification was about the same in all systems. The primary fossil energy use was calculated to be 1.45 and 1.37MJ/kg nitrogen for Salix and straw, respectively, compared to 35.14MJ for natural gas. The biomass production was assumed to be self-supporting with nutrients by returning part of the ammonium nitrate produced together with the ash from the gasification. For the production of nitrogen from Salix, it was calculated that 3914kg of nitrogen can be produced every year from 1ha, after that 1.6% of the produced nitrogen has been returned to the Salix production. From wheat straw, 1615kg of nitrogen can be produced annually from 1ha, after that 0.6% of the nitrogen has been returned.

  8. Capacity and mechanisms of ammonium and cadmium sorption on different wetland-plant derived biochars

    Energy Technology Data Exchange (ETDEWEB)

    Cui, Xiaoqiang [Ministry of Education Key Laboratory of Environmental Remediation and Ecological Health, College of Environmental and Resource Sciences, Zhejiang University, Hangzhou 310058 (China); Hao, Hulin [Ningbo Raw Water Resource Research Academy, Ningbo (China); Zhang, Changkuan [Ministry of Education Key Laboratory of Environmental Remediation and Ecological Health, College of Environmental and Resource Sciences, Zhejiang University, Hangzhou 310058 (China); He, Zhenli [Indian River Research and Education Center, Institute of Food and Agricultural Sciences, University of Florida, Fort Pierce, FL 34945 (United States); Yang, Xiaoe, E-mail: [Ministry of Education Key Laboratory of Environmental Remediation and Ecological Health, College of Environmental and Resource Sciences, Zhejiang University, Hangzhou 310058 (China)


    The objective of this study was to investigate the relationship between Cd{sup 2+}/NH{sub 4}{sup +} sorption and physicochemical properties of biochars produced from different wetland plants. Biochars from six species of wetland plants (i.e., Canna indica, Pennisetum purpureum Schum, Thalia dealbata, Zizania caduciflora, Phragmites australis and Vetiveria zizanioides) were obtained at 500 °C and characterized, and their sorption for ammonium and cadmium was determined. There were significant differences in elemental composition, functional groups and specific surface area among the biochars derived from different wetland plant species. Sorption of ammonium and cadmium on the biochars could be described by a pseudo second order kinetic model, and the simple Langmuir model fits the isotherm data better than the Freundlich or Temkin model. The C. indica derived biochar had the largest sorption capacity for NH{sub 4}{sup +} and Cd{sup 2+}, with a maximum sorption of 13.35 and 125.8 mg g{sup −1}, respectively. P. purpureum Schum derived biochar had a similar maximum sorption (119.3 mg g{sup −1}) for Cd{sup 2+}. Ammonium sorption was mainly controlled by cation exchange, surface complexation with oxygen-containing functional groups and the formation of magnesium ammonium phosphate compounds, whereas for Cd{sup 2+} sorption, the formation of cadmium phosphate precipitates, cation exchange and binding to oxygen-containing groups were the major possible mechanisms. In addition, the sorption of ammonium and cadmium was not affected by surface area and microporosity of the biochars. - Highlights: • Biochars varied in physicochemical properties and adsorption capacity. • Canna indica derived biochar has a high sorption capacity for Cd{sup 2+}. • NH{sub 4}{sup +} and Cd{sup 2+} sorption on biochars fits a pseudo second order and Langmuir model. • Sorption mechanism is related to complexation, cation exchange and precipitation.

  9. Research on elimination of oxidant interference in the process of thiocyanate determination by ferric nitrate spectrophotometry%硝酸铁分光光度法测定硫氰酸盐的氧化剂干扰去除实验研究

    Institute of Scientific and Technical Information of China (English)

    张灵芝; 杨凤萍; 降向正; 柳华丽; 王今朝; 陈莉


    During monitoring thiocyanate in middle stream water samples from the process of gold industrial wastewater treatment,it is observed that the presence of oxidant materials like hydrogen peroxide and ozone will sabo-tage the determination accuracy.The paper first carried out the research on elimination of hydrogen peroxide and ozone interference in the process of thiocyanate determination by ferric nitrate spectrophotometry,settling the elimination method of oxidant materials.The accuracy of the method was proved by the addition of standard substance.The method could be widely applied in the determination of thiocyanate in wastewater containing oxidants produced in gold indus-try.%在黄金工业废水处理过程中间水样的硫氰酸盐监测中,常常发现过氧化氢、臭氧等氧化性物质的存在会使测定结果的准确度低。该文分别进行了硝酸铁分光光度法测定硫氰酸盐中过氧化氢和臭氧干扰去除的实验研究,确定了氧化性物质干扰的去除方法;经加入标准物质验证实验,充分说明了该方法测定结果的准确度。该方法可广泛应用于含有氧化剂的黄金工业废水中硫氰酸盐的测定。

  10. Final report on the safety assessment of sodium sulfite, potassium sulfite, ammonium sulfite, sodium bisulfite, ammonium bisulfite, sodium metabisulfite and potassium metabisulfite. (United States)

    Nair, Bindu; Elmore, Amy R


    Sodium Sulfite, Ammonium Sulfite, Sodium Bisulfite, Potassium Bisulfite, Ammonium Bisulfite, Sodium Metabisulfite, and Potassium Metabisulfite are inorganic salts that function as reducing agents in cosmetic formulations. All except Sodium Metabisulfite also function as hair-waving/straightening agents. In addition, Sodium Sulfite, Potassium Sulfite, Sodium Bisulfite, and Sodium Metabisulfite function as antioxidants. Although Ammonium Sulfite is not in current use, the others are widely used in hair care products. Sulfites that enter mammals via ingestion, inhalation, or injection are metabolized by sulfite oxidase to sulfate. In oral-dose animal toxicity studies, hyperplastic changes in the gastric mucosa were the most common findings at high doses. Ammonium Sulfite aerosol had an acute LC(50) of >400 mg/m(3) in guinea pigs. A single exposure to low concentrations of a Sodium Sulfite fine aerosol produced dose-related changes in the lung capacity parameters of guinea pigs. A 3-day exposure of rats to a Sodium Sulfite fine aerosol produced mild pulmonary edema and irritation of the tracheal epithelium. Severe epithelial changes were observed in dogs exposed for 290 days to 1 mg/m(3) of a Sodium Metabisulfite fine aerosol. These fine aerosols contained fine respirable particle sizes that are not found in cosmetic aerosols or pump sprays. None of the cosmetic product types, however, in which these ingredients are used are aerosolized. Sodium Bisulfite (tested at 38%) and Sodium Metabisulfite (undiluted) were not irritants to rabbits following occlusive exposures. Sodium Metabisulfite (tested at 50%) was irritating to guinea pigs following repeated exposure. In rats, Sodium Sulfite heptahydrate at large doses (up to 3.3 g/kg) produced fetal toxicity but not teratogenicity. Sodium Bisulfite, Sodium Metabisulfite, and Potassium Metabisulfite were not teratogenic for mice, rats, hamsters, or rabbits at doses up to 160 mg/kg. Generally, Sodium Sulfite, Sodium

  11. 40 CFR 180.1284 - Ammonium salts of higher fatty acids (C8-C18 saturated; C8-C12 unsaturated); exemption from the... (United States)


    ... Ammonium salts of higher fatty acids (C8-C18 saturated; C8-C12 unsaturated); exemption from the requirement of a tolerance. Ammonium salts of C8-C18 saturated and C8-C12 unsaturated higher fatty acids are... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Ammonium salts of higher fatty...

  12. Pulmonary effects of ultrafine and fine ammonium salts aerosols in healthy and monocrotaline-treated rats following short-term exposure

    NARCIS (Netherlands)

    Cassee, F.R.; Arts, J.H.E.; Fokkens, P.H.B.; Spoor, S.M.; Boere, A.J.F.; Bree, L. van; Dormans, J.A.M.A.


    In the present study the effects of a 3-day inhalation exposure to model compounds for ambient particulate matter were investigated: ammonium bisulfate, ammonium ferrosulfate, and ammonium nitrate, all components of the secondary aerosol fraction of ambient particulate matter (PM), and carbon black

  13. Ecological functions of ciliated protozoa in marine ecosystem: effects of ammonium on the population growth of Euplotes vannus

    Institute of Scientific and Technical Information of China (English)

    Xu Henglong; Song Weibo; Zhu Mingzhuang; Wang Mei; Ma Honggang; Xu Xiaozhong


    The effects of ammonium on the population growth of the marine ciliate, Euplotes vannus, were examined using ecotoxicological method. It is showed that ammonium exerts inhibitory effects on the growth of the ciliate populations in a concentration-dependent way. Statistical analysis reveals that the population growth dynamics exposed to ammonium-N concentration over 100mg/L are significantly different from that in the control at P<0.05 level. Linear regression determined that the 24h, 36h, 48h, 60h, 72h and 84h IC50 values of ammonium-N are 19.68, 201.51, 167.49, 47.86, 50.43 and 43.11 concentration over 100mg/L, respectively (P<0.05; pH 8.2; salinity 28 ppt; temperature, 25℃). The results indicate that the tolerance to ammonium in E. vannus is considerably higher than that of the larvae or juveniles of some metozoa, such as cultured prawns and oysters. Therefore, it is believed that the high tolerance to ammonium is necessary for ciliated protozoa to play positive roles in maintaining and improving water quality in marine ecosystems, especially in the intensive aquaculture waters with high-level ammonium. In addition, the correlation between IC50 values and exposure time was discussed.

  14. Enhanced sorption of polycyclic aromatic hydrocarbons to tetra-alkyl ammonium modified smectites via cation-pi interactions. (United States)

    Qu, Xiaolei; Liu, Ping; Zhu, Dongqiang


    The objective of this study was to characterize molecular sorptive interactions of polycyclic aromatic hydrocarbons (PAHs) by organoclays modified with quaternary ammonium cations. Three PAHs, naphthalene (NAPH), phenanthrene (PHEN), and pyrene (PYR), and three chlorobenzenes, 1,2-dichlorobenzene (DCB), 1,2,4,5-tetrachlorobenzene (TeCB), and pentachlorobenzene (PtCB), were sorbed from aqueous solution to reference montmorillonite clays (SWy-2) exchanged respectively with tetramethyl ammonium (TMA), tetraethyl ammonium (TEA), tetra-n-butyl ammonium (TBA), and hexadecyltrimethyl ammonium (HDTMA) cations. Solute hydrophobicities are compared between PAHs and chlorobenzenes using the solute n-octanol-water partition coefficient, n-hexadecane-water partition coefficient, and polyethylene-water distribution coefficient. The PAHs show several- to more than 10-fold greater sorption than the chlorobenzenes having close hydrophobicities but fewer delocalized pi electrons (NAPH/DCB, PHEN/TeCB, and PYR/ PtCB) by TEA-, TBA-, and HDTMA-clays. Furthermore, the PAHs show greater trends of solubility enhancement than the compared chlorobenzenes by TMA, TEA, and TBA in aqueous solution. The enhanced sorption and aqueous solubility of PAHs are best described by cation-pi interactions between ammonium cations and PAHs relative to chlorobenzenes that are incapable of such interactions. Cation-pi complexation between PAHs and tetra-alkyl ammonium cations in chloroform was verified by ring-current-induced upfield chemical shifts of the alkyl groups of cations in the 1H NMR spectrum.

  15. Decreasing ammonium generation using hydrogenotrophic bacteria in the process of nitrate reduction by nanoscale zero-valent iron

    Energy Technology Data Exchange (ETDEWEB)

    An, Yi; Li, Tielong [College of Environmental Science and Engineering/Tianjin Key Laboratory of Environmental Remediation and Pollution Control/Ministry of Education Key Laboratory of Pollution Processed and Environmental Criteria, Nankai University, Tianjin 300071 (China); Jin, Zhaohui, E-mail: [College of Environmental Science and Engineering/Tianjin Key Laboratory of Environmental Remediation and Pollution Control/Ministry of Education Key Laboratory of Pollution Processed and Environmental Criteria, Nankai University, Tianjin 300071 (China); Dong, Meiying; Li, Qianqian; Wang, Shuaima [College of Environmental Science and Engineering/Tianjin Key Laboratory of Environmental Remediation and Pollution Control/Ministry of Education Key Laboratory of Pollution Processed and Environmental Criteria, Nankai University, Tianjin 300071 (China)


    An integrated nitrate treatment using nanoscale zero-valent iron (NZVI) and Alcaligenes eutrophus, which is a kind of hydrogenotrophic denitrifying bacteria, was conducted to remove nitrate and decrease ammonium generation. Within 8 days, nitrate was removed completely in the reactors containing NZVI particles plus bacteria while the proportion of ammonium generated was only 33%. That is a lower reduction rate but a smaller proportion of ammonium relative to that in abiotic reactors. It was also found that ammonium generation experienced a biphasic process, involving an increasing period and a stable period. After domestication of the bacteria, the combined NZVI-cell system could remove all nitrate without ammonium released when the refreshed nitrate was introduced. Nitrate reduction and the final product distribution were also studied in batch reactors amended with different initial NZVI contents and biomass concentrations, respectively. Both the nitrate removal rate and the ammonium yield decreased when the initial content of NZVI reduced and the initial biomass concentration increased. However, about 27% of the nitrate was converted to ammonium when excess bacteria (OD{sub 422} = 0.026) were used, which was higher than that with appropriate amount of bacteria.

  16. Effect of Ammonium Fixation on Determination of N Mineralized from Soil Microbial Biomass

    Institute of Scientific and Technical Information of China (English)



    Two soils with relatively high(Soil 1)and low(Soil 2) ammonium fixation capacities were used in this study to examiune the effect of ammonium fixation on the determination of N mineralized from soil microbial biomass.Organism suspension was quantitatively introduced to Soil 1 at various rates.Both fumigation-incubation (FI) and fumigation-extraction (FE) methods were used to treat the soil.The amount of fixed NH4+ increased with increasing rate of organism-N addition.A close correlation was found between the amount of fixed ammonium and th rate of organism-m addition.The net increases of fixed NH4+-N were equivalent to 38% and 12% of the added organism-N for FI and FE treatments,rspectively,in this specific soil.To provide isotopic evidence,15N-labelled organism-N was added to Soils 1 and 2 at 121.4 mg N kg-1.In FI treatment,22 and 3mg N kg-1 of labelled N were found in the fraction of fixed NH4+-N in Soile 1 and 2 respectively;while in FE treatment,9 mg N kg-1 of labelled N was found in the fraction of fixed NH4+-N in Soil 1 only.There was no labelled N in the fraction of fixed NH4+-N in Soil 2.In all of the unfumigated (check) soils,there was little or no labelled N in the fixed fractions,probably because the organism-N added was easily mineralized and nitrified.A mean of 0.64 for KN value,the fraction of N mineralized in the killed microbial biomass,as obtained with inclusion of the net increase of fixed NH4+-N,The corresponding value calculated with exclusion of the net increase of ficed NH4+-N was 0.46 ,It was concluded that ammonium fixation was a problem in deterination of KN,particularly for soils with a high ammonium fixation capacity, Results also showed that microbial biomass N measurement by FFE method was less affected by ammonium process than that by FI method.

  17. Ammonium and phosphate excretion in three common echinoderms from Philippine coral reefs. (United States)

    Dy; Yap


    The ammonium and phosphate excretion and oxygen consumption of three species of echinoderms (Tripneustes gratilla, Protoreaster nodosus and Ophiorachna incrassata) commonly encountered in Philippine coral reefs were investigated in relation to time of day (i.e. daytime between 10:00 and 12:00 h vs. nighttime between 22:00 and 24:00 h) and their recent feeding history (i.e. recently-collected vs. short-term starvation for 3+/-1 days). The experiment used whole organism incubations and followed a nested hierarchical design. Ammonium excretion rates were 1447+/-310 nmolg(-1) DWh(-1) (mean+/-S.E., n=24) for T. gratilla, 361+/-33 for O. incrassata and 492+/-38 for P. nodosus. Ammonium excretion differed significantly among species, time of incubation and recent feeding history. Interaction between species and recent feeding history was also significant. The organisms excreted more ammonium during daytime except for starved specimens of O. incrassata. In addition, animals that were starved in the laboratory for a few days had a tendency to excrete more ammonium than recently-collected specimens. Phosphate excretion rates were 25+/-13 nmolg(-1) DWh(-1) for T. gratilla, 10+/-2 for O. incrassata and 4+/-1 for P. nodosus. There were no significant differences in phosphate excretion among the three species of echinoderms, their recent feeding history and time of day. Oxygen consumption rates were 286+/-24 µg O(2)g(-1) DWh(-1) for T. gratilla, 64+/-3 for O. incrassata and 54+/-3 for P. nodosus. Oxygen consumption differed significantly among species and recent feeding history but differed only slightly with time of incubation. There was a significant correlation between oxygen consumption and ammonium excretion (r=0.48, P=0.018), and between oxygen consumption and phosphate excretion (r=0.41, P=0.047) for T. gratilla. The nutrient excretion by tropical echinoderms is another pathway by which inorganic nutrients are regenerated in coral reef communities. However, the quantity

  18. A nitrogen-dependent switch in the high affinity ammonium transport in Medicago truncatula. (United States)

    Straub, Daniel; Ludewig, Uwe; Neuhäuser, Benjamin


    Ammonium transporters (AMTs) are crucial for the high affinity primary uptake and translocation of ammonium in plants. In the model legume Medicago truncatula, the genomic set of AMT-type ammonium transporters comprises eight members. Only four genes were abundantly expressed in young seedlings, both in roots and shoots. While the expression of all AMTs in the shoot was not affected by the nitrogen availability, the dominating MtAMT1;1 gene was repressed by nitrogen in roots, despite that cellular nitrogen concentrations were far above deficiency levels. A contrasting de-repression by nitrogen was observed for MtAMT1;4 and MtAMT2;1, which were both expressed at intermediate level. Weak expression was found for MtAMT1;2 and MtAMT2;3, while the other AMTs were not detected in young seedlings. When expressed from their endogenous promoters, translational fusion proteins of MtAMT1;1 and MtAMT2;1 with green fluorescent protein were co-localized in the plasma membrane of rhizodermal cells, but also detected in cortical root layers. Both transporter proteins similarly functionally complemented a yeast strain that is deficient in high affinity ammonium transport, both at acidic and neutral pH. The uptake into yeast mediated by these transporters saturated with Km AMT1;1 = 89 µM and Km AMT2;1 = 123 µM, respectively. When expressed in oocytes, MtAMT1;1 mediated much larger (15)N-ammonium uptake than MtAMT2;1, but NH4 (+) currents were only recorded for MtAMT1;1. These currents saturated with a voltage-dependent Km = 90 µM at -80 mV. The cellular localization and regulation of the AMTs suggests that MtAMT1;1 encodes the major high affinity ammonium transporter gene in low nitrogen grown young M. truncatula roots and despite the similar localization and substrate affinity, MtAMT2;1 appears functionally distinct and more important at higher nitrogen supply.

  19. SNPs altering ammonium transport activity of human Rhesus factors characterized by a yeast-based functional assay.

    Directory of Open Access Journals (Sweden)

    Aude Deschuyteneer

    Full Text Available Proteins of the conserved Mep-Amt-Rh family, including mammalian Rhesus factors, mediate transmembrane ammonium transport. Ammonium is an important nitrogen source for the biosynthesis of amino acids but is also a metabolic waste product. Its disposal in urine plays a critical role in the regulation of the acid/base homeostasis, especially with an acid diet, a trait of Western countries. Ammonium accumulation above a certain concentration is however pathologic, the cytotoxicity causing fatal cerebral paralysis in acute cases. Alteration in ammonium transport via human Rh proteins could have clinical outcomes. We used a yeast-based expression assay to characterize human Rh variants resulting from non synonymous single nucleotide polymorphisms (nsSNPs with known or unknown clinical phenotypes and assessed their ammonium transport efficiency, protein level, localization and potential trans-dominant impact. The HsRhAG variants (I61R, F65S associated to overhydrated hereditary stomatocytosis (OHSt, a disease affecting erythrocytes, proved affected in intrinsic bidirectional ammonium transport. Moreover, this study reveals that the R202C variant of HsRhCG, the orthologue of mouse MmRhcg required for optimal urinary ammonium excretion and blood pH control, shows an impaired inherent ammonium transport activity. Urinary ammonium excretion was RHcg gene-dose dependent in mouse, highlighting MmRhcg as a limiting factor. HsRhCG(R202C may confer susceptibility to disorders leading to metabolic acidosis for instance. Finally, the analogous R211C mutation in the yeast ScMep2 homologue also impaired intrinsic activity consistent with a conserved functional role of the preserved arginine residue. The yeast expression assay used here constitutes an inexpensive, fast and easy tool to screen nsSNPs reported by high throughput sequencing or individual cases for functional alterations in Rh factors revealing potential causal variants.

  20. SNPs altering ammonium transport activity of human Rhesus factors characterized by a yeast-based functional assay. (United States)

    Deschuyteneer, Aude; Boeckstaens, Mélanie; De Mees, Christelle; Van Vooren, Pascale; Wintjens, René; Marini, Anna Maria


    Proteins of the conserved Mep-Amt-Rh family, including mammalian Rhesus factors, mediate transmembrane ammonium transport. Ammonium is an important nitrogen source for the biosynthesis of amino acids but is also a metabolic waste product. Its disposal in urine plays a critical role in the regulation of the acid/base homeostasis, especially with an acid diet, a trait of Western countries. Ammonium accumulation above a certain concentration is however pathologic, the cytotoxicity causing fatal cerebral paralysis in acute cases. Alteration in ammonium transport via human Rh proteins could have clinical outcomes. We used a yeast-based expression assay to characterize human Rh variants resulting from non synonymous single nucleotide polymorphisms (nsSNPs) with known or unknown clinical phenotypes and assessed their ammonium transport efficiency, protein level, localization and potential trans-dominant impact. The HsRhAG variants (I61R, F65S) associated to overhydrated hereditary stomatocytosis (OHSt), a disease affecting erythrocytes, proved affected in intrinsic bidirectional ammonium transport. Moreover, this study reveals that the R202C variant of HsRhCG, the orthologue of mouse MmRhcg required for optimal urinary ammonium excretion and blood pH control, shows an impaired inherent ammonium transport activity. Urinary ammonium excretion was RHcg gene-dose dependent in mouse, highlighting MmRhcg as a limiting factor. HsRhCG(R202C) may confer susceptibility to disorders leading to metabolic acidosis for instance. Finally, the analogous R211C mutation in the yeast ScMep2 homologue also impaired intrinsic activity consistent with a conserved functional role of the preserved arginine residue. The yeast expression assay used here constitutes an inexpensive, fast and easy tool to screen nsSNPs reported by high throughput sequencing or individual cases for functional alterations in Rh factors revealing potential causal variants.

  1. The physiological and morphological phenotype of a yeast mutant resistant to the quaternary ammonium salt N-(dodecyloxycarboxymethyl)-N,N,N-trimethyl ammonium chloride. (United States)

    Obłak, Ewa; Gamian, Andrzej; Adamski, Ryszard; Ułaszewski, Stanisław


    We investigated the action of the quaternary ammonium salt (QAS) called IM (N-(dodecyloxycarboxymethyl)-N,N,N-trimethyl ammonium chloride) on Saccharomyces cerevisiae yeast cells. Changes in the yeast cell ultrastructure were confirmed by electron microscopy. We treated resistant mutant cells with QAS, and confirmed destruction of the mutant cytoplasm, an increase in the thickness of the cell wall, separation of the cell wall from the cytoplasm, and the accumulation of numerous lipid droplets. We also observed a relatively high production of lipids in the cells of the parental wild-type strain Sigma1278b and in its IM-resistant (IM(R)) mutant in the presence of the QAS. The IM(R) mutant showed increased sensitivity to CaCl(2) and SDS, and resistance to ethidium bromide, chloramphenicol, erythromycin and osmotic shock. It also tolerated growth at low pH. We suggest that the resistance to IM could be connected with the level of permeability of the cell membrane because the IM(R) mutant was sensitive to this compound in vivo in the presence of SDS and guanidine hydrochloride, which cause increased permeability of the cell plasma membrane.

  2. Model-based evaluation on the conversion ratio of ammonium to nitrite in a nitritation process for ammonium-rich wastewater treatment

    Institute of Scientific and Technical Information of China (English)

    LI Xiao-ming; YANG Qi; ZENG Guang-ming; A. Cornelius; K. H. Rosenwinkel; S. Kunst; D. Weichgrebe


    Modeling for nitritation process was discussed and analyzed quantlitatively for the factors that influence nitrite accumulation. The results indicated that pH, inorganic carbon source and Hydraulic Retention Time(HRT) as well as biomass concentration are the main factors that influenced the conversion ratio of ammonium to nitrite. A constant high pH can lead to a high nitritation rate and results in high conversion ratio on condition that free ammonia inhibition do not happen. In a CSTR system, without pH control, this conversion ratio can be monitored by pH variation in the reactor. The pH goes down far from the inlet level means a strongly nitrite accumulation. High concentration of alkalinity can promoted the conversion ratio by means of accelerating the nitritation rate through providing sufficient inorganic carbon source(carbon dioxide). When inorganic carbon source was depleted, the nitritation process stopped. HRT adjustment could be an efficient way to make the nitritation system run more flexible, which to some extent can meet the requirements of the fluctuant of inlet parameters such as ammonium concentration, pH, and temperature and so on. Biomass concentration is the key point, especially for a CSTR system in steady state, which was normally circumscribed by the characteristics of bacteria and may also affected by aeration mode and can be increased by prolonging the HRT on the condition of no nitrate accumulation when no recirculation available. The higher the biomass concentration is, the better the nitrite accumulation can be obtained.

  3. Disturbance of hapten-antibody equilibria by ammonium sulphate solutions. A source of error in antibody affinity determinations. (United States)

    Seppälä, I J


    The affinity of anti-hapten antibody can be conveniently measured by precipitating immune complexes with ammonium sulphate. The method has, however, not proved very reproducible. Here is described one variable difficult to control in the assay: the ammonium sulphate was found to cause dissociation of ligands from hapten (NIP)--antibody complexes. The reason was the volume increase caused by addition of ammonium sulphate. The study suggested that in the calculation of the free hapten concentration the final volume during precipitation should be used. The precipitate should not be washed when hapten binding capacities are measured.

  4. Nitrogenase switch-off by ammonium ions in Azospirillum brasilense requires the GlnB nitrogen signal-transducing protein. (United States)

    Klassen, Giseli; Souza, Emanuel M; Yates, M Geoffrey; Rigo, Liu Un; Costa, Roberta M; Inaba, Juliana; Pedrosa, Fábio O


    Nitrogenase activity in several diazotrophs is switched off by ammonium and reactivated after consumption. The signaling pathway to this system in Azospirillum brasilense is not understood. We show that ammonium-dependent switch-off through ADP-ribosylation of Fe protein was partial in a glnB mutant of A. brasilense but absent in a glnB glnZ double mutant. Triggering of inactivation by anaerobic conditions was not affected in either mutant. The results suggest that glnB is necessary for full ammonium-dependent nitrogenase switch-off in A. brasilense.

  5. Comparison of gel filtration and ammonium sulphate precipitation in the purification of diphtheria toxin and toxoid. (United States)

    Møyner, K; Christiansen, G


    Crude diphtheria toxin and toxoid were subjected to purification by gel filtration and stepwise ammonium sulphate precipitation. The various fractions obtained by the purification procedures were studied by immunological methods. A high molecular weight fraction of glycoprotein nature was present in all of the crude preparations studied. The fraction was antigenically non-identical with the real toxin or toxoid and did not have its origin in the culture medium. It showed a long flocculation time when tested against equine diphtheria toxoid antiserum. The fraction could be removed from the crude preparations by gel filtration or by precipitation with 21% (w/v) ammonium sulphate. When comparing toxoids purified by each of these methods, the method of gel filtration resulted in a somewhat higher degree of purity, suggesting that this method would be more suitable than the AS precipitation method for the purification of diphtheria toxoid.

  6. FTIR analysis of adsorption of poly diallyl-dimethyl-ammonium chloride on kaolinite

    Institute of Scientific and Technical Information of China (English)

    SUN Wei; LIU Wen-li; HU Yue-hua


    The flocculation behavior of ultrafine kaolinite suspension was investigated through settlement tests and FTIR method wasemployed to probe the adsorption mechanism of flocculant on kaolinite. The results show that the maximum settling rate of kaoliniteoccurs at pH value of 3.33, which is close to the point of zero charge(PZC) of kaolinite (3.5). This result is in good agreement withthe double electric layer theory. Kaolinite suspension reaches the largest settling rate at a low concentration of 39 g/t for polydiallyl-dimethyl-ammonium chloride(PDADMA) flocculant, whereas for polyacrylamides(PAM) the dosage is required to be 500 g/t.When macromolecule polymer is adsorbed on surface, kaolinite particles may be flocculant due to the bridging effect. There arecation flocculant characteristic bands on the spectrum of kaolinite but no obvious shifting. Thus, the adsorption of polydiallyl-dimethyi-ammonium chloride on kaolinite surface is physical adsorption.

  7. Response of anaerobic ammonium oxidation to inorganic nitrogen fluctuations in temperate estuarine sediments (United States)

    Teixeira, Catarina; Magalhães, Catarina; Joye, Samantha B.; Bordalo, Adriano A.


    The discovery of anaerobic ammonium oxidation (anammox) highlighted the importance of alternative metabolic pathways to inorganic nitrogen removal in natural environments, particularly in those subjected to increased nitrate inputs, such as estuaries. Laboratory enrichment experiments were used to test the effect of increasing loads of nitrate (NO3-), nitrite (NO2-), and ammonium (NH4+) on the anammox process. Three Atlantic temperate estuaries (NW Portugal) were investigated along a salinity gradient, and anammox activity was measured under different NO3-, NO2-, and NH4+ treatments, using the isotope pairing technique. Obtained results showed that NO3- stimulated denitrification but not anammox, whereas NO2- additions had a positive effect on anammox activity, confirming its role as a key environmental control. On the other hand, increasing NH4+ concentrations seemed to inhibit anammox for low salinity sites. Our findings suggested an important role of the natural availability of nitrogen compounds in regulating anammox and the magnitude of anammox versus denitrification in estuarine environments.

  8. Solid/liquid phase diagram of the ammonium sulfate/succinic acid/water system. (United States)

    Pearson, Christian S; Beyer, Keith D


    We have studied the low-temperature phase diagram and water activities of the ammonium sulfate/succinic acid/water system using differential scanning calorimetry and infrared spectroscopy of thin films. Using the results from our experiments, we have mapped the solid/liquid ternary phase diagram, determined the water activities based on the freezing point depression, and determined the ice/succinic acid phase boundary as well as the ternary eutectic composition and temperature. We also compared our results to the predictions of the extended AIM aerosol thermodynamics model (E-AIM) and found good agreement for the ice melting points in the ice primary phase field of this system; however, differences were found with respect to succinic acid solubility temperatures. We also compared the results of this study with those of previous studies that we have published on ammonium sulfate/dicarboxylic acid/water systems.

  9. Application of Laboratory-Synthesized Ammonium Zeolite LTX as Soil Amendment Additive

    Directory of Open Access Journals (Sweden)

    Bright Kwakye-Awuah


    Full Text Available The production of ammonium-exchanged zeolite X (NH4-LTX and its soil amendment activity is presented. The ammonium-exchanged zeolite X was characterized by X-ray diffraction (XRD analysis, scanning electron microscopy (SEM, energy dispersive X-ray (EDX analysis, particle size analysis and Fourier transformed infrared (FTIR spectroscopy. The addition of NH4-LTX increased the pH, total nitrogen, potassium, sodium content and water retention capacity of the soil. Consequently, the fresh weight, dry weights, plant heights, stem thickness, stem length, number of leaves, leaves areas was remarkably greater for both maize and okro planted in soils containing NH4-LTX compared to plants in soil without NH4-LTX.

  10. Persistence of selected ammonium- and phosphonium-based ionic liquids in urban park soil microcosms

    DEFF Research Database (Denmark)

    Sydow, Mateusz; Szczepaniak, Zuzanna; Framski, Grzegorz


    Knowledge about biodegradability of ionic liquids (ILs) in terrestrial systems is limited. Here, using urban park soil microcosms spiked with either ammonium- or phosphonium-based ILs [didecyldimethylammonium 3-amino-1,2,4-triazolate, benzalkonium 3-amino-1,2,4-triazolate, trihexyl(tetradecyl)pho......Knowledge about biodegradability of ionic liquids (ILs) in terrestrial systems is limited. Here, using urban park soil microcosms spiked with either ammonium- or phosphonium-based ILs [didecyldimethylammonium 3-amino-1,2,4-triazolate, benzalkonium 3-amino-1,2,4-triazolate, trihexyl......(tetradecyl)phosphonium chloride, or trihexyl(tetradecyl)phosphonium 1,2,4-triazolate], we studied their (i) 300-day primary biodegradation, and (ii) influence on CO2 evolution from the microcosms. The primary biodegradation ranged from 21 to 33% of total compound in the dissolved phase. The evolution of CO2 from spiked...

  11. Dissolution of Irradiated Commercial UO2 Fuels in Ammonium Carbonate and Hydrogen Peroxide

    Energy Technology Data Exchange (ETDEWEB)

    Soderquist, Chuck Z.; Johnsen, Amanda M.; McNamara, Bruce K.; Hanson, Brady D.; Chenault, Jeffrey W.; Carson, Katharine J.; Peper, Shane M.


    We propose and test a disposition path for irradiated nuclear fuel using ammonium carbonate and hydrogen peroxide media. We demonstrate on a 13 g scale that >98% of the irradiated fuel dissolves. Subsequent expulsion of carbonate from the dissolver solution precipitates >95% of the plutonium, americium, curium, and substantial amounts of fission products, effectively partitioning the fuel at the dissolution step. Uranium can be easily recovered from solution by any of several means, such as ion exchange, solvent extraction, or direct precipitation. Ammonium carbonate can be evaporated from solution and recovered for re-use, leaving an extremely compact volume of fission products, transactinides, and uranium. Stack emissions are predicted to be less toxic, less radioactive, chemically simpler, and simpler to treat than those from the conventional PUREX process.

  12. Ammonium removal from high-strength aqueous solutions by Australian zeolite

    DEFF Research Database (Denmark)

    Wijesinghe, D. Thushari N; Dassanayake, Kithsiri B.; Sommer, Sven G.


    Removal of ammonium nitrogen (NH4 +-N) particularly from sources which are highly rich in nitrogen is important for addressing environmental pollution. Zeolites, aluminosilicate minerals, are commonly used as commercial adsorbents and ion-exchange medium in number of commercial applications due...... to its high adsorption capacity of ammonium (NH4 +). However, detailed investigations on NH4 + adsorption and ion exchange capacities of Australian natural zeolites are rare, particularly under higher NH4 + concentrations in the medium. Therefore, this study was conducted to determine NH4 + adsorption...... characteristics of Australian natural zeolites at high NH4 + concentrations with and without other chemical compounds in an aqueous solution. Results showed that initial NH4 + concentration, temperature, reaction time, and pH of the solution had significant effects on NH4 + adsorption capacity of zeolite...

  13. Synthesis and surface-active property of bis-quaternary ammonium-sodium sulfate Gemini surfactant

    Institute of Scientific and Technical Information of China (English)

    Zhao Qiuling; Gao Zhinong


    N,N-dimethyldodecylamine,hydrochloride and epichlorohydrin (molar ration is 2:1:1) were used to synthesize bis-quaternary ammonium Gemini surfactant with a hydroxyl in its spacer group by the one-pot method.This hydroxyl was sulfonated by chlorosulfonic acid and then neutralized to bis-quaternary ammonium-sodium sulfate zwitterionic Gemini surfactant.The yield of the final product was 78%,and the melting point was 231-233℃.Its structure was characterized by IR,1H-NMR,MS,and elemental analyses.The critical micelle concentration (cmc)and surface tension of the novel zwitterionic Gemini surfactant in aqueous solution at 15℃ are 7.2×10-5 mol/L and 34.5 mN/m,respectively.

  14. Thiourea-doped ammonium dihydrogen phosphate: A single crystal neutron diffraction investigation

    Indian Academy of Sciences (India)

    A Jayarama; M R Suresh Kumar; S M Dharmaprakash; R Chitra; R R Choudhury


    Thiourea-doped ammonium dihydrogen phosphate (TADP) exhibits nonlinear optical property and the second harmonic generation efficiency of these crystals is three times that of pure ammonium dihydrogen phosphate (ADP) crystal. In this context, the study of structural distortion in the thiourea-doped ADP crystal is significant, hence single neutron diffraction investigations were undertaken. The final -factors are: [2 > 2(2)] = 0.11, Goodness of fit () = 1.15. Though the dopant could not be located from the difference Fourier map, the cell parameters ( = = 7.531(3) Å, = 7.544(5) Å) were found to be significantly greater than that of pure ADP at RT ( = = 7.502(1)$ ̊Å, = 7.546(1) Å). This indicates that the dopant concentration in the crystals is small but enough to bring changes in the overall average structure.

  15. New crystal phase of ammonium nitrate: First-principles prediction and characterization (United States)

    Steele, Brad A.; Oleynik, Ivan I.


    First principles evolutionary crystal structure search found a new crystal phase of ammonium nitrate (AN). The calculated Raman spectra of this new phase is consistent with the recently reported experimental Raman spectrum that contains two peaks previously associated with a pressure-induced phase transition. The phase transition is reported to occur at a pressure of 17 GPa while the new phase is calculated to be lower in free energy than phase IV of AN (AN-IV) above a pressure of 10.83 GPa. The new phase has a monoclinic unit cell with the P21/m space group symmetry (AN-P21/m). This new phase is similar to AN-IV except the ammonium molecules are oriented differently relative to the nitrate molecules. The calculated Raman spectrum of both AN-P21/m and AN-IV as a function of pressure shows good agreement with experiment up to 33 GPa.

  16. Thermodynamic Properties of Hydrogen + Tetra-n-Butyl Ammonium Bromide Semi-Clathrate Hydrate

    Directory of Open Access Journals (Sweden)

    Shunsuke Hashimoto


    Full Text Available Thermodynamic stability and hydrogen occupancy on the hydrogen + tetra-n-butyl ammonium bromide semi-clathrate hydrate were investigated by means of Raman spectroscopic and phase equilibrium measurements under the three-phase equilibrium condition. The structure of mixed gas hydrates changes from tetragonal to another structure around 95 MPa and 292 K depending on surrounding hydrogen fugacity. The occupied amount of hydrogen in the semi-clathrate hydrate increases significantly associated with the structural transition. Tetra-n-butyl ammonium bromide semi-clathrate hydrates can absorb hydrogen molecules by a pressure-swing without destroying the hydrogen bonds of hydrate cages at 15 MPa or over.


    Institute of Scientific and Technical Information of China (English)

    Xiao-ming Tan; Hong-quan Xie; Nai-yu Huang


    New water soluble and photocrosslinkable prepolymers containing acrylate and quaternary ammonium salt groups were synthesized from epoxy phenolic resin via ring-opening reaction with acrylic acid and with aqueous solution of triethylamine hydrochloride successively. The second reaction needs no phase transfer catalyst to accelerate, since the product formed can act as a phase transfer catalyst. The prepolymer obtained contains both photocrosslinkable acrylate groups and hydrophilic quaternary ammonium salt groups. Optimum conditions for these reactions were studied. The photosensitivity of the prepolymer was also investigated. The effects of different photoinitiators, different crosslinkable diluent monomers and amine accelerator on the photosensitivity of the prepolymer were compared. The photoinitiator of hydrogen abstraction type is still effective without using amine or alcohol as accelerator, because the prepolymer contains α H beside the OH groups formed in the ring-opening reactions.

  18. Ammonium Y zeolite applied as a thermochemolysis reagent for identification of polyethers and polyesters. (United States)

    Blazsó, Marianne; Bozi, János


    A potential thermochemolysis reagent has been tested for the pyrolysis gas chromatographic identification of polyether, polyester and polyether- or polyester-based thermoplastic polyurethane. The main advantage of ammonium Y zeolite over liquid reagents is that it does not react prior to pyrolysis, and its reactions have no incomplete products. The procedure of the thermochemolysis is as simple as running a pyrolysis-GC/MS analysis sampling a powder mixture of roughly equal mass of polymer and ammonium Y zeolite. The GC/MS chromatograms obtained show that the products of thermochemolysis are specific to the diol and dicarboxylic units of the polymer. It was observed that ethanal or 1,4-dioxane forms from ethylene oxide components of polyethers and polyesters, tetrahydrofuran from butylene oxide units, hexanedinitrile from adipate groups, and benzodinitrile from terephthalate groups.

  19. Evaluation on the microbial interactions of anaerobic ammonium oxidizers and heterotrophs in Anammox biofilm

    DEFF Research Database (Denmark)

    Ni, Bing-Jie; Ruscalleda, Mael; Smets, Barth F.


    Anaerobic ammonium oxidation (Anammox) is a cost-effective new process to treat high-strength nitrogenous wastewater. In this work, the microbial interactions of anaerobic ammonium oxidizers and heterotrophs through the exchange of soluble microbial products (SMP) in Anammox biofilm....... Experimental results showed the heterotrophs could grow both on SMP and decay released substrate from the metabolism of the Anammox bacteria. However, heterotrophic growth in Anammox biofilm (23%) was significantly lower than that of nitrifying biofilm (30–50%). The model predictions matched well...... with the experimental observations of the bacterial distribution, as well as the nitrogenous transformations in batch and continuous experiments. The modeling results showed that low nitrogen surface loading resulted in a lower availability of SMP leading to low heterotrophic growth in Anammox biofilm, but high...

  20. β-CD assisted dissolution of quaternary ammonium permanganates in aqueous medium. (United States)

    Bank, Suraj Prakash; Guru, Partha Sarathi; Dash, Sukalyan


    The non-polar internal cavity of β-cyclodextrin (β-CD) has been exploited for the entrapment of the hydrophobic tails of two water insoluble quaternary ammonium permanganates (QAPs): cetyltrimethylammonium permanganate (CTAP) and tetrabutylammonium permanganate (TBAP), for solubilization in aqueous medium. The solubilization and organizational behavior of the QAPs in aqueous β-CD solution have been determined from the comparison of their rates of self-oxidation in presence and in absence of β-CD. Effect of QAP concentration on their observed rate constants (k(obs)) at a fixed β-CD concentration, phase solubility analysis in varying β-CD concentration, impact of quaternary ammonium bromides (QABs) on the kobs values of CTAP and TBAP at fixed QAP and β-CD concentrations, and the temperature effect have been reported. A scheme to explain the solvation of QAPs in aqueous β-CD has been proposed based on dynamic light scattering (DLS) analysis of the samples.