WorldWideScience

Sample records for ammonium chlorides

  1. Alkali metal and ammonium chlorides in water and heavy water (binary systems)

    CERN Document Server

    Cohen-Adad, R

    1991-01-01

    This volume surveys the data available in the literature for solid-fluid solubility equilibria plus selected solid-liquid-vapour equilibria, for binary systems containing alkali and ammonium chlorides in water or heavy water. Solubilities covered are lithium chloride, sodium chloride, potassium chloride, rubidium chloride, caesium chloride and ammonium chloride in water and heavy water.

  2. The nucleation kinetics of ammonium metavanadate precipitated by ammonium chloride

    Science.gov (United States)

    Du, Guangchao; Sun, Zhaohui; Xian, Yong; Jing, Han; Chen, Haijun; Yin, Danfeng

    2016-05-01

    The nucleation kinetics of ammonium metavanadate (NH4VO3) was investigated under conditions of the simulated process for precipitation of NH4VO3 from the vanadium-containing solution. Induction periods for the nucleation of NH4VO3 were experimentally determined as a function of supersaturation at temperatures from 30 to 45 °C. Using the classical nucleation theory, the interfacial tension between NH4VO3 and supersaturated solution, the nucleation rate and critical radius of nucleus for the homogeneous nucleation of NH4VO3 were estimated. With temperature increasing, the calculated interfacial tension gradually decreased from 29.78 mJ/m2 at 30 °C to 23.66 mJ/m2 at 45 °C. The nucleation rate was found to proportionally increase but the critical radius of nucleus exponentially decreased, with increase in supersaturation ratio at a constant temperature. The activation energy for NH4VO3 nucleation was obtained from the relationship between temperature and induction period, ranging from 79.17 kJ/mol at S=25 to 115.50 kJ/mol at S=15. FT-IR and Raman spectrum indicated that the crystals obtained in the precipitation process were NH4VO3.

  3. Recovering germanium from coal ash by chlorination with ammonium chloride

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    A new process of enriching germanium from coal ash was developed. The process involves in mixing the coal ash and ammonium chloride and then roasting the mixture to produce germanium chloride that is then absorbed by dilute hydrochloric acid and hydrolyzed to germanium oxide. The germanium recovery reached to 80.2% at the optimum condition: mass ratio of NH4Cl/coal ash is 0.15, roasting temperature 400℃ and roasting time 90 min.

  4. Hibiscus sabdariffa Affects Ammonium Chloride-Induced Hyperammonemic Rats

    OpenAIRE

    Subramanian, P.; M. Mohamed Essa

    2007-01-01

    Hibiscus sabdariffa (HS) is an edible medicinal plant, indigenous to India, China and Thailand and is used in Ayurveda and traditional medicine. Alcoholic extract of HS leaves (HSEt) was studied for its anti-hyperammonemic and antioxidant effects in brain tissues of ammonium chloride-induced hyperammonemic rats. Oral administration of HSEt (250 mg kg−1 body weight) significantly normalizes the levels of ammonia, urea, uric acid, creatinine and non-protein nitrogen in the blood. HSEt significa...

  5. Hibiscus sabdariffa Affects Ammonium Chloride-Induced Hyperammonemic Rats

    Directory of Open Access Journals (Sweden)

    M. Mohamed Essa

    2007-01-01

    Full Text Available Hibiscus sabdariffa (HS is an edible medicinal plant, indigenous to India, China and Thailand and is used in Ayurveda and traditional medicine. Alcoholic extract of HS leaves (HSEt was studied for its anti-hyperammonemic and antioxidant effects in brain tissues of ammonium chloride-induced hyperammonemic rats. Oral administration of HSEt (250 mg kg−1 body weight significantly normalizes the levels of ammonia, urea, uric acid, creatinine and non-protein nitrogen in the blood. HSEt significantly reduced brain levels of lipid peroxidation products such as thiobarbituric acid and reactive substances (TBARS and hydroperoxides (HP. However, the administered extract significantly increased the levels of antioxidants such as catalase (CAT, superoxide dismutase (SOD, glutathione peroxidase (GPx and reduced glutathione (GSH in brain tissues of hyperammonemic rats. This investigation demonstrates significant anti-hyperammonemic and antioxidant activity of HS.

  6. Preparation and characteristic research of anhydrous magnesium chloride with dehydrated ammonium carnallite

    Institute of Scientific and Technical Information of China (English)

    ZHOU Ning-bo; CHEN Bai-zhen; HE Xin-kuai; LI Yi-bing

    2006-01-01

    Taking the saline lake bischofite and NH4Cl that was removed with the ammonia method and continuwas synthesized. And then the ammonium carnallite was dehydrated to some extent at 160℃ for 4 h. Ammonium carnallite reacted with ammonia at 240℃ for 150 min and the ammonation ammonium carnallite was produced. Finally, the ammonation ammonium carnallite was calcined at 750℃ into anhydrous magnesium chloride containing only 0.1% (mass fraction) of MgO. On the other hand, dehydrated ammonium carnallite was mixed with the solid ammonium chloride at mass ratio 1:4 at high temperature and with the differential pressure of HN3 above 30.5 kPa. The dehydrated ammonium carnallite of mixture was dehydrated at 410℃, and then calcined at 700℃ into anhydrous magnesium chloride with only 0. 087% (mass fraction) of MgO. X-ray diffraction and electron microscopy analysis results prove that anhydrous magnesium chloride obtained by both methods hasn't mixed phases, the particle is large and even has good dispersion, which is suitable for preparation of metal magnesium in the electrolysis.

  7. Preparation of anhydrous magnesium chloride in a gas-solid reaction with ammonium carnallite

    Institute of Scientific and Technical Information of China (English)

    Zhou Ningbo; Chen Baizhen; He Xinkuai; Li Yibing

    2006-01-01

    Dehydrated ammonium carnallite was synthesized with bischofite from salt lake and ammonium chloride solution in a 1:1 molar ratio of MgCl2:NH4Cl,dehydrated at 160℃ for about 4 h.The yield was above 85%.The product was then mixed with solid-state ammonium chloride with a 1:4 mass ratio for the further dehydration at 410℃.The decomposition of NH4Cl made a pressure of NH3 at 30.5 kPa to prevent the hydrolysis of ammonium carnallite.The anhydration of magnesium chloride was achieved at 700℃.The results showed that anhydrous magnesium chloride contains magnesium oxide in an amount that was less than 0.1% by weight.XRD pattern and SEM micrograph showed a good dispersion of ammonium carnallite and anhydrous magnesium chloride crystals with well-distributed big grains,just enough to meet the need for the production of magnesium metal in the electrolysis process.

  8. Effect of application of ammonium chloride and calcium chloride on alfalfa cation-anion content and yield.

    Science.gov (United States)

    Goff, J P; Brummer, E C; Henning, S J; Doorenbos, R K; Horst, R L

    2007-11-01

    A major factor predisposing the cow to periparturient hypocalcemia, or milk fever, is being fed a prepartum ration with a high dietary cation-anion difference (DCAD). The DCAD can be favorably altered to prevent milk fever by decreasing K and Na or increasing Cl and S in forages for cows in late gestation. The objective of this study was to test the hypothesis that application of Cl to alfalfa could increase Cl in forage, thereby lowering DCAD. We conducted a field experiment at 2 Iowa locations in which established plots of alfalfa were treated in April 2001 with 0, 56, 112, or 168 kg of Cl/ha using ammonium chloride, calcium chloride, or a mix of the 2 sources with equal amounts of chloride coming from each source. Plots were harvested 4 times in 2001 and once in 2002 and plant tissue analyzed for mineral composition. Applying chloride from either source once in the spring resulted in increased plant chloride content over all 4 cuttings for that year. Averaged across both locations, chloride levels were elevated from 0.52% in control plots to 0.77, 0.87, and 0.89% Cl in plots treated with 56, 112, and 168 kg of Cl/ha, respectively. Chloride application had no effect on plant potassium, sodium, calcium, magnesium, or phosphorus. These results suggest chloride application can elevate chloride content and lower DCAD values of alfalfa, and also maintain crop yield. PMID:17954756

  9. Thermal annealing of gamma irradiated ammonium chloride (Preprint no. RC-37)

    International Nuclear Information System (INIS)

    Ammonium chloride produces N2H4+ and Cl2 as the main radiolytic products on gamma irradiation. Thermal annealing has a marked effect on the stability of N2H4+ and Cl2. During the thermal annealing the chemical yield of nitrite and iodine was studied by dissolving irradiated ammonium chloride in aqueous sodium nitrate and potassium iodide respectively. The yield of iodine in isochronal annealing showed an exponential behaviour with temperature while that of nitrite showed a decrease and then increases at higher temperatures. The results are explained on the basis of dissociation and recombination of N2H4+ with temperature. (author). 3 refs., 2 figs

  10. Antioxidant Potential of Momordica Charantia in Ammonium Chloride-Induced Hyperammonemic Rats

    OpenAIRE

    A. Justin Thenmozhi; Subramanian, P.

    2011-01-01

    The present study was aimed to investigate the antioxidant potential of Momordica charantia fruit extract (MCE) in ammonium chloride-induced (AC) hyperammonemic rats. Experimental hyperammonemia was induced in adult male Wistar rats (180–200 g) by intraperitoneal injections of ammonium chloride (100 mg kg−1 body weight) thrice a week. The effect of oral administration (thrice a week for 8 consecutive weeks) of MCE (300 mg kg−1 body weight) on blood ammonia, plasma urea, serum liver marker enz...

  11. (tert-Butyl)(2-hydroxyethyl)ammonium chloride

    OpenAIRE

    Cintya Valerio-Cárdenas; Simón Hernández-Ortega; David Morales-Morales

    2014-01-01

    In the cation of the title molecular salt, C6H16NO+·Cl−, the N—C—C—O torsion angle is 176.5 (2)°. In the crystal, the cations and chloride ions are linked by N—H...O and O—H...O hydrogen bonds, generating a two-dimensional network parallel to (100).

  12. High levan production by Bacillus licheniformis NS032 using ammonium chloride as the sole nitrogen source.

    Science.gov (United States)

    Kekez, B D; Gojgic-Cvijovic, G D; Jakovljevic, D M; Stefanovic Kojic, J R; Markovic, M D; Beskoski, V P; Vrvic, M M

    2015-03-01

    In this study, levan production by Bacillus licheniformis NS032 isolated from a petroleum sludge sample was investigated. High levan yield was obtained in a wide range of sucrose concentrations (up to 400 g/L) and, contrary to most levan-producing strains, using ammonium chloride as the sole N source. Interaction between sucrose, ammonium chloride, and initial pH of the medium in a low sucrose (60-200 g/L) and a high sucrose (300-400 g/L) system was analyzed by response surface methodology. According to the calculated model in the low sucrose system, maximum predicted levan yield was 47.8 g/L (sucrose 196.8 g/L, ammonium chloride 2.4 g/L, pH 7.0), while in the high sucrose system, levan yield was 99.2 g/L (sucrose 397.6 g/L, ammonium chloride 4.6 g/L, pH 7.4). In addition, protective effect of microbial levan against copper toxicity to Daphnia magna is observed for the first time. The acute toxicity (48 h EC50) of copper decreased from 0.14 to 0.44 mg/L by levan in concentration of 50 ppm. PMID:25592434

  13. 21 CFR 520.310 - Caramiphen ethanedisulfonate and ammonium chloride tablets.

    Science.gov (United States)

    2010-04-01

    ... tablets. 520.310 Section 520.310 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND... § 520.310 Caramiphen ethanedisulfonate and ammonium chloride tablets. (a) Specifications. Each tablet...) Amount. One tablet per 15 to 30 pounds of body weight every 4 to 6 hours.1 (2) Indications for use....

  14. Uranium(VI) extraction from chloride solution with benzyloctadecyldimethyl ammonium chloride (BODMAC) in a liquid membrane process

    International Nuclear Information System (INIS)

    The recovery of uranium(VI) from chloride solution using a liquid emulsion membrane (LEM) technique was studied. The emulsion is constituted by the quaternary salt of benzyloctadecyldimethyl ammonium chloride (BODMAC, R4NCl) as a carrier, kerosene as organic diluent, Span 80 as emulsifying agent and 0.5 mol/l Na2CO3 as stripping phase. The important variables affecting the LEM permeation process such as the concentrations of extractant, internal strip phase, types of organic diluent, and the presence of magnesium chloride or magnesium sulfate were investigated. It was found that, at a given condition, the maximum extraction rate of uranium(VI) reached 80%. The emulsion was stable at low pH in the presence of certain amounts of electrolytes such as NaCl and MgCl2. (author)

  15. Synthesis of allyl dimethyl dehydroabietyl ammonium chloride and its surface activities

    International Nuclear Information System (INIS)

    Allyl dimethyl dehydroabietyl ammonium chloride (ADMDHAC) was synthesized from dehydroabietylamine (DHA) and allyl chloride. The synthesis was carried out in two steps. First, DHA was transformed into N,N-dimethyl dehydroabietyl amine (DMDHA) through Eschweiler-Clarke Reaction. Second, the ADMDHAC was obtained after the DMDHA had reacted with allyl chloride and recrystallized using a solvent composed of diethyl ether and ethanol. Critical micelle concentrations (cmc) of ADMDHAC at 25 degree C was found to be 2.851*10-4 mol.L-1, and its surface tension value at cmc (gamma cmc) was determined to be 30.6 mN.m-1, these data suggested that ADMDHAC could be used as a good alternative of benzalkonium chloride (BC). (author)

  16. Ammonium Chloride Ingestion Attenuates Exercise-Induced mRNA Levels in Human Muscle

    OpenAIRE

    Edge, Johann; Muendel, Toby; Pilegaard, Henriette; Hawke, Emma; Leikis, Murray; Lopez-Villalobos, Nicolas; Oliveira, Rodrigo S. F.; Bishop, David J

    2015-01-01

    Minimizing the decrease in intracellular pH during high-intensity exercise training promotes greater improvements in mitochondrial respiration. This raises the intriguing hypothesis that pH may affect the exercise-induced transcription of genes that regulate mitochondrial biogenesis. Eight males performed 10x2-min cycle intervals at 80% V ˙ O 2 peak intensity on two occasions separated by ~2 weeks. Participants ingested either ammonium chloride (ACID) or calcium carbonate (PLA) the day before...

  17. Effect of cycocel [(2, chloroethyl) trimethyl ammonium chloride] on growth and nutrition of jute

    International Nuclear Information System (INIS)

    Studies were conducted on the effect of cycocel [(2, chloroethyl) trimethyl ammonium chloride] on the growth and nutrition of two jute varieties. C. capsularis (JRC 212) and C. olitorius (JRO 632). In general, the soil application was found to be superior to foliar application. The latter method yielded significant results when applied at 30 days to C. capsularis whereas C. olitorius responded well at 45 days of spray. Out of the N, P and K application, P was applied as 32P-superphosphate. (author)

  18. Flotation of kaolinite and diaspore with hexadecyl dimethyl benzyl ammonium chloride

    Institute of Scientific and Technical Information of China (English)

    HU Yue-hua; OUYANG Kui; CAO Xue-feng; ZHANG Li-min

    2008-01-01

    Tertiary amine was synthesized from fatty amine and formaldehyde. And then the synthesized tertiary amine was used toreact with benzyl chloride to synthesize hexadecyl dimethyl benzyl ammonium chloride (1627) at ambient pressure. Using thesynthesized 1627 as collector, the flotation properties of diaspore and kaolinite were investigated by single mineral and mixedmineral test. The flotation mechanism of diaspore, kaolinite and 1627 was discussed based on FTIR spectra. The results show that themass ratio of aluminum to silicate achieves 15.02 and the recovery of alumina in concentrate is 43.07% using 1627 as a collector. The 1627 is found to be a more effective and a promising collector for reverse flotation to remove aluminum-silicate minerals frombauxite.

  19. Antioxidant Potential of Momordica Charantia in Ammonium Chloride-Induced Hyperammonemic Rats

    Directory of Open Access Journals (Sweden)

    A. Justin Thenmozhi

    2011-01-01

    Full Text Available The present study was aimed to investigate the antioxidant potential of Momordica charantia fruit extract (MCE in ammonium chloride-induced (AC hyperammonemic rats. Experimental hyperammonemia was induced in adult male Wistar rats (180–200 g by intraperitoneal injections of ammonium chloride (100 mg kg−1 body weight thrice a week. The effect of oral administration (thrice a week for 8 consecutive weeks of MCE (300 mg kg−1 body weight on blood ammonia, plasma urea, serum liver marker enzymes and oxidative stress biomarkers in normal and experimental animals was analyzed. Hyperammonemic rats showed a significant increase in the activities of thiobarbituric acid reactive substances, hydroperoxides and liver markers (alanine transaminase, aspartate transaminase and alkaline phosphatase, and the levels of glutathione peroxidase, superoxide dismutase, catalase and reduced glutathione were decreased in the liver and brain tissues. Treatment with MCE normalized the above-mentioned changes in hyperammonemic rats by reversing the oxidant-antioxidant imbalance during AC-induced hyperammonemia, and offered protection against hyperammonemia. Our results indicate that MCE exerting the antioxidant potentials and maintaining the cellular integrity of the liver tissue could offer protection against AC-induced hyperammonemia. However, the exact underlying mechanism is yet to be investigated, and examination of the efficacy of the active constituents of the M. charantia on hyperammonemia is desirable.

  20. Levels of ammonium, sulfate, chloride, calcium, and sodium in snow and ice from southern Greenland

    International Nuclear Information System (INIS)

    Chemical analysis of surface snows and dated ice core samples from Dye 3, Greenland, suggests that the ammonium cation is a major constituent in all samples and that the annual ammonium levels present in the south Greenland samples have varied from 3.3 to 26.3 μg/kg between the seventeenth century and the present time. The annual range of 1974--1975 surface samples was between 3.8 and 8.8 μg/kg, while the mean was 5.7 +- 1.8 μ/kg. The recent large-scale uses of fixed nitrogen fertilizers and industrial pollution have apparently not affected the levels of ammonia reaching southern Greenland. The sodium and chloride present are predominantly derived from ocean spray, while more than 90% of the calcium is of continental origin. The levels of these three elements have not apparently been affected by human activity since the industrial revolution. Sulfate levels have increased dramatically since the industrial revolution, suggesting that sulfate of anthropogenic origin is the most important source of sulfate in modern snows from southern Greenland. The amount of the sulfuric acid neutralized by the ammonium cations was approximately 100% in the seventeenth and eighteenth centuries, dropping to approximately 20% in the 1974--1975 samples. These figures imply that there has been in increase in the acidity of precipitation in southern Greenland since the end of the eighteenth ce

  1. Effects of propofol on ammonium chloride-exposed astrocyte morphology and aquaporin-4 expression

    Institute of Scientific and Technical Information of China (English)

    Hanjian Chen; Caifei Pan; Peng Guo; Yueying Zheng; Shengmei Zhu

    2011-01-01

    Ammonia induces astrocyte swelling, which is strongly associated with overexpression of aquaporin-4.However, the mechanisms by which ammonia induces astrocyte swelling, and subsequently upregulating aquaporin-4 expression, remain unknown.In the present study,astrocytes were cultured in vitro and exposed to ammonium chloride (NH4CI), followed by propofol,protein kinase C agonist, or antagonist, respectively.Astrocyte morphology was observed by light microscopy, and aquaporin-4 expression was detected by western blot analysis.Results showed that propofol or protein kinase C agonist significantly attenuated the degree of NH4CI-induced astrocyte swelling and inhibited increased aquaporin-4 expression.Propofol treatment inhibited aquaporin-4 overexpression in cultured astrocyte induced by NH4CI; protein kinase C pathway activation is potentially involved.

  2. Monte Carlo Studies of the Orientational Order-Disorder Phase Transition in Solid Ammonium Chloride

    CERN Document Server

    Topper, R Q; Topper, Robert Q.; Freeman, David L.

    1994-01-01

    Monte Carlo methods are used to study the phase transition in ammonium chloride from the orientationally ordered $\\delta$ phase to the orientationally disordered $\\gamma$ phase. An effective pair potential is used to model the interaction between ions. Thermodynamic properties are computed in the canonical and isothermal-isobaric ensembles. Each ammonium ion is treated as a rigidly rotating body and the lattice is fixed in the low-temperature CsCl geometry. A simple extension of the Metropolis Monte Carlo method is used to overcome quasiergodicity in the rotational sampling. In the constant-$NVT$ calculations the lattice is held rigid; in the constant-$NpT$ calculations the lattice parameter is allowed to fluctuate. In both ensembles the order parameter rapidly falls to zero in the range (200 - 250)K, suggesting that the model disorders at a temperature in fair agreement with the experimental disordering temperature (243K). Peaks in the heat capacity and thermal expansivity curves are also found in the same t...

  3. Impact of hydrotreaters ammonium chloride salt deposition of refinery operations; Formacao de depositos de sais de amonio em Unidades de Hidrotramento (HDT'S)

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, Nelmo Furtado; Cunha, Fabiana A.; Alvise, Paulo Pio [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Fouling and consequent under deposit corrosion caused by ammonium salts, especially ammonium chloride, have serious impact on the reliability of operation of various process units. In hydrotreating units salt deposition on heat exchanger tubes causes a decrease in heat transfer efficiency, decrease hydrotreating efficiency, increased pressure drops, and corrosion. This paper will discuss the causes of ammonium chloride fouling,methods to help prevent and/or mitigate the fouling, and provide a case history demonstrating the effects of ammonium chloride formations in one refinery operation. (author)

  4. Phase and extraction equilibria in water-polyethyleneglycol ethers of monoethanolamides of synthetic fatty acid-ammonium chloride systems

    Science.gov (United States)

    Lesnov, A. E.; Golovkina, A. V.; Kudryashova, O. S.; Denisova, S. A.

    2016-08-01

    Phase equilibria in layering systems of water, polyethyleneglycol ethers of monoethanolamides of synthetic fatty acids (SFAs) (synthamide-5), and ammonium chloride are studied. The possibility of using such systems for the liquid extraction of metal ions is evaluated. The effect the nature of salting-out agents has on the processes of segregation of the systems has been considered.

  5. Determination of the Optimum Conditions for Leaching of Zinc Cathode Melting Furnace Slag in Ammonium Chloride Media

    Science.gov (United States)

    Behnajady, Bahram; Babaeidehkordi, Amin; Moghaddam, Javad

    2014-04-01

    This research is part of a continuing effort to leach zinc from zinc cathode melting furnace slags (ZCMFSs) to produce zinc oxide. The slag with an assay of 68.05 pct Zn was used in ammonium chloride leaching for zinc extraction. In this paper, the effects of influential factors on extraction efficiency of Zn from a ZCMFS were investigated. The Taguchi's method based on orthogonal array (OA) design has been used to arrange the experimental runs in order to maximize zinc extraction from a slag. The softwares named Excel and Design-Expert 7 have been used to design experiments and subsequent analysis. OA L 25 (55) consisting of five parameters, each with five levels, was employed to evaluate the effects of reaction time ( t = 10, 30, 50, 70, 90 minutes), reaction temperature [ T = 313, 323, 333, 343, 353 (40, 50, 60, 70, 80) K (°C)], pulp density ( S/ L = 20, 40, 60, 80, 100 g/L), stirring speed ( R = 300, 400, 500, 600, 700 rpm), and ammonium chloride concentration ( C = 10, 15, 20, 25, 30 pctwt), on zinc extraction percent. Statistical analysis, ANOVA, was also employed to determine the relationship between experimental conditions and yield levels. The results showed that the significant parameters affecting leaching of slag were ammonium chloride concentration and pulp density, and increasing pulp density reduced leaching efficiency of zinc. However, increasing ammonium chloride concentration promoted the extraction of zinc. The optimum conditions for this study were found to be t 4: 70 minutes, T 5: 353 K (80 °C), ( S/ L)2: 40 g/L, R 3: 500 rpm, and C 4: 25 pctwt. Under these conditions, the dissolution percentage of Zn in ammonium chloride media was 94.61 pct.

  6. Bipolar membrane electrodialysis for generation of hydrochloric acid and ammonia from simulated ammonium chloride wastewater.

    Science.gov (United States)

    Li, Ya; Shi, Shaoyuan; Cao, Hongbin; Wu, Xinmin; Zhao, Zhijuan; Wang, Liying

    2016-02-01

    Simulated ammonium chloride wastewater was treated by a lab-scale bipolar membrane electrodialysis for the generation of HCl and NH3·H2O and desalination. The influence of initial concentration of NH4Cl, current density, salt solution volume, initial concentration of acid and base and membrane stack structure on the yields of HCl and NH3·H2O was investigated. The current efficiency and energy consumption were also examined under different conditions. The results showed that, at the current density of 48 mA/cm(2), the highest concentration of HCl and NH3·H2O with initial concentration of 110 g/L NH4Cl was 57.67 g/L and 45.85 g/L, respectively. Higher initial concentration of NH4Cl was favor to reduce unit energy consumption and increase current efficiency of the BMED system. The membrane stack voltage of BMED increased quickly under constant current when the concentration of NH4Cl contained in the solution of salt compartment was depleted below the "inflection point concentration" about 8000 mg/L. It means that the concentration of NH4Cl below 8000 mg/L was no longer suitable for BMED because of higher energy consumption. The HCl and NH3·H2O concentration increased more quickly following the increase of current density. When increasing the volume of NH4Cl, the concentration of HCl and NH3·H2O also increased. The high initial concentration of acid and base could improve the final concentration of them, while the growth rate was decreased. Compared with the BMED system with three compartments, the growth rate of HCl concentration with the two compartments was higher and its unit energy consumption was lower. It meant that the performance of the BMED system could be improved by optimizing operation conditions. The application feasibility of the generation of HCl and NH3·H2O and desalination of ammonium chloride wastewater by BMED was proved. PMID:26674548

  7. EFFECT OF NONI (Morinda citrifolia) EXTRACT ON TREATMENT OF ETHYLENE GLYCOL AND AMMONIUM CHLORIDE INDUCED KIDNEY DISEASE

    OpenAIRE

    R. Bhavani; S Nandhini; B Rojalakshmi; R Shobana; S. Rajeshkumar

    2014-01-01

    Morinda citrifolia is one of the important medicinal plants having a lot of phytochemicals, which plays very important role in medicines. In this present investigation, the animals are induced to kidney stone by giving ethylene glycol mixed with water and given orally, and 0.5 % ammonium chloride are mixed with water and given orally for 28 days. The induced rats are treated with Noni (1 in 10 ml ) mixed with H2O and given to the rats for 28 days, and induced to kidney stone + ammonium chlori...

  8. Ammonium Chloride Ingestion Attenuates Exercise-Induced mRNA Levels in Human Muscle.

    Directory of Open Access Journals (Sweden)

    Johann Edge

    Full Text Available Minimizing the decrease in intracellular pH during high-intensity exercise training promotes greater improvements in mitochondrial respiration. This raises the intriguing hypothesis that pH may affect the exercise-induced transcription of genes that regulate mitochondrial biogenesis. Eight males performed 10x2-min cycle intervals at 80% VO2speak intensity on two occasions separated by ~2 weeks. Participants ingested either ammonium chloride (ACID or calcium carbonate (PLA the day before and on the day of the exercise trial in a randomized, counterbalanced order, using a crossover design. Biopsies were taken from the vastus lateralis muscle before and after exercise. The mRNA level of peroxisome proliferator-activated receptor co-activator 1α (PGC-1α, citrate synthase, cytochome c and FOXO1 was elevated at rest following ACID (P0.05; the difference in PGC-1α mRNA content 2 h post-exercise between ACID and PLA was not significant (P = 0.08. Thus, metabolic acidosis abolished the early post-exercise increase of PGC-1α mRNA and the mRNA of downstream mitochondrial and glucose-regulating proteins. These findings indicate that metabolic acidosis may affect mitochondrial biogenesis, with divergent responses in resting and post-exercise skeletal muscle.

  9. Phase equilibrium conditions of semi-calthrate hydrates of (tetra-n-butyl ammonium chloride + carbon dioxide)

    International Nuclear Information System (INIS)

    Highlights: • Carbon dioxide hydrate stability zone was enlarged with the help of TBAC. • Carbon dioxide uptake into TBAC semi-clathrate hydrates is confirmed. • Equilibrium pressure of hydrate decreased with the increase of TBAC mass concentration. • The addition of TBAC reduces the formation pressures of carbon dioxide hydrate by 2.5 MPa. - Abstract: In the present work, hydrate equilibrium conditions for (tetra-n-butyl ammonium chloride (TBAC) + carbon dioxide + water) mixtures were investigated. Tetra-n-butyl ammonium chloride was reported to form a semi-clathrate hydrate. The experiments were carried out within the TBAC mass fraction range of (0.05 to 0.3). The experimental results showed that the presence of TBAC decreased the formation pressure of carbon dioxide double hydrate within the experimental temperature range. Moreover, pressure reduction was dependent on the TBAC concentration

  10. EFFECT OF NONI (Morinda citrifolia EXTRACT ON TREATMENT OF ETHYLENE GLYCOL AND AMMONIUM CHLORIDE INDUCED KIDNEY DISEASE

    Directory of Open Access Journals (Sweden)

    R Bhavani

    2014-06-01

    Full Text Available Morinda citrifolia is one of the important medicinal plants having a lot of phytochemicals, which plays very important role in medicines. In this present investigation, the animals are induced to kidney stone by giving ethylene glycol mixed with water and given orally, and 0.5 % ammonium chloride are mixed with water and given orally for 28 days. The induced rats are treated with Noni (1 in 10 ml mixed with H2O and given to the rats for 28 days, and induced to kidney stone + ammonium chloride is treated with Noni extract mixed with water and given to the rats for 28 days. After the treatment the urinary parameters like creatinine, protein, calcium, oxalate, phosphate are decreased except magnesium, its level is increased and serum creatinine level is decreased. The results are shows the good medicinal properties of noni extract of Morinda citrifolia.

  11. Selective process of zinc extraction from spent Zn–MnO2 batteries by ammonium chloride leaching

    OpenAIRE

    Nogueira, C. A.; Margarido, F.

    2015-01-01

    Recycling of spent Zn-MnO2 batteries by hydrometallurgy is usually carried out by leaching in acid media, mainly with sulphuric acid solutions. Another type of leachant was used in this work, specifically solutions of concentrated ammonium chloride. The development of this study has relied on the prediction of the chemical behavior of the constituting phases based on data obtained from theoretical and experimental equilibrium values. The assessment of the effects of factors on leaching effici...

  12. Environmental assessment of an alkyl dimethyl benyzl ammonium chloride (ADBAC) based mollusicide using laboratory tests

    Energy Technology Data Exchange (ETDEWEB)

    Dobbs, M.G.; Cherry, D.S.; Scott, J.C. [Virginia Tech, Blacksburg, VA (United States); Petrille, J.C. [Betz Water Management Center, Trevose, PA (United States)

    1995-06-01

    A series of acute and chronic toxicity tests were conducted to estimate the potential environmental impact of n-alkyl dimethyl benzyl ammonium chloride (ADBAC) when used to control zebra mussels and other types of macrofouling organism in industrial cooling systems. The ADBAC-based molluscicide was tested as pure product and often detoxification with bentonite clay. Six flow-through acute tests were conducted to estimate the toxicity of ADBAC. In addition three chronic toxicity tests using Pimephales promelas, Daphnia magna and Selenastrum capricornutum were carried out to evaluate the efficacy of complexing the ADBAC-based molluscicide with a bentonite clay as a detoxification strategy. A 29-day CO{sub 2} Production test was also conducted to evaluate the biodegradability of the molluscicide. Of the six species tested in acute flow-through experiments, D. magna (LC{sub 50} = 0.02 mg ADBAC/L) was the most sensitive species followed by Mysidopsis bahia (LC{sub 50} = 0.08 mg ADBAC/L), Menidia beryllina (LC{sub 50} = 0.88 mg ADBAC/L), P. promelas (LC{sub 50} = 0.36 mg ADBAC/L), Cyprinodon variegatus (LC{sub 50} = 0.88 mg ADBAC/L), and Oncorhynchus mykiss (LC{sub 50} = 1.01 mg ADBAC/L). In the detoxification studies the three test species were exposed to treatment levels of: 0:0, 2.5:0, 2.5:25, 2.5:37.5, 2.5:50, 2.5:75, and 0:75 as mg/L ADBAC:clay. Bentonite clay was found to be an effective detoxification agent for this molluscicide at all treatment levels, except for the 2.5:25 treatment. In addition, a biodegradation study showed that the ADBAC-based molluscicide was readily biodegradable by unacclimated activated sludge microorganisms releasing 65.9% of the theoretical possible CO{sub 2} after 29 days.

  13. Cultivation of Spirulina platensis by continuous process using ammonium chloride as nitrogen source

    Energy Technology Data Exchange (ETDEWEB)

    Sassano, C.E.N.; Gioielli, L.A.; Almeida, K.A.; Sato, S.; Carvalho, J.C.M. [Department of Biochemical and Pharmaceutical Technology, Faculty of Pharmaceutical Sciences, University of Sao Paulo, Av. Prof. Lineu Prestes 580, Bloco 16, 05508-900 Sao Paulo-SP (Brazil); Perego, P.; Converti, A. [Department of Chemical and Process Engineering ' ' G.B. Bonino' ' , University of Genoa, via Opera Pia 15, 16145 Genoa (Italy)

    2007-08-15

    This work is focused on the influence of dilution rate (0.08{<=}D{<=}0.32 d{sup -1}) on the kinetics of continuous cultivation of Spirulina platensis at two different concentrations of ammonium chloride (N{sub 0}=1.0 and 10 mM) as nitrogen source. Cell productivity increased in both series of runs up to D{approx_equal}0.12-0.16 d{sup -1}, and then decreased. While at N{sub 0}=1.0 mM biomass washing was certainly the cause of progressive cell concentration decrease, a combination of this phenomenon with the toxic effect of excess ammonia was responsible, at N{sub 0}=10 mM and D{>=}0.20 d{sup -1}, for quick stop of cell growth just beyond the achievement of maximum cell productivity (92.4 mg l{sup -1} d{sup -1}). Similar profile was observed for protein productivity, that achieved a maximum value of 67.0 mg l{sup -1} d{sup -1}, because of the very high protein content (72.5%) of biomass produced under these conditions. The yield of nitrogen-to-biomass was much higher at the lower N{sub 0}, because of the low protein content, and reached a maximum value of 9.7 g g{sup -1} at D=0.08-0.12 d{sup -1}. The yield of nitrogen-to-protein showed less marked difference, being most of the nitrogen present in the cell as proteins or free amino-acids. (author)

  14. 甲醇氯化铵法合成氯甲烷催化剂%Synthesis of Methyl Chloride from Methanol and Ammonium Chloride

    Institute of Scientific and Technical Information of China (English)

    魏士东; 张文娇; 孙玉捧; 刘玉敏; 胡永其; 付应利

    2012-01-01

    Metal-based catalysts carried on activated carbon support for synthesis of methyl chloride from methanol and ammonium chloride were prepared with /so-volumetric impregnation of Zn(NO3)2, Ni(CH3COO)2, Zn(CH3COO)2, Ni(NO3)2 and ZnCl2, respectively. The catalytic performance of the catalysts for synthesis of methyl chloride from methanol and ammonium chloride were evaluated in a laboratory fixed bed reactor fed. The experimental results showed that the catalyst prepared with ZnCb impregnation method exhibited the best catalytic performance under the conditions of temperature of 290-350 °C, molar ratio of methanol to hydrogen chloride of 1:1, and space velocity of 300 min-1. The yield of ammonium chloride reached up to 66%. Moreover, the catalyst was stable and had a long life time.%采用等体积浸渍法,分别以Zn(NO3)2,Ni(CH3COO)2,Zn(CH3COO)2,Ni(NO3)2和ZnCl2作为负载物制备了活性炭载体金属基催化剂,在自制的常压连续流动固定床反应器中,以氯化氢和甲醇为原料,在氨环境下模拟氯化铵与甲醇反应考察了不同催化剂在合成氯甲烷中的催化性能.结果表明,以活性炭为载体制备的氯化锌催化剂,在温度290~350℃,氯化氢和甲醇物质的量之比为1∶1和空速300 min-1的条件下,甲醇转化率、氯甲 烷选择性和收率较高,氯甲烷收率达到66%以上.催化剂性能稳定,且有较长的使用寿命.

  15. 40 CFR 721.10154 - Quaternary ammonium compounds, dicoco alkyldimethyl, chlorides, reaction products with silica.

    Science.gov (United States)

    2010-07-01

    ... alkyldimethyl, chlorides, reaction products with silica. 721.10154 Section 721.10154 Protection of Environment..., dicoco alkyldimethyl, chlorides, reaction products with silica. (a) Chemical substance and significant..., dicoco alkyldimethyl, chlorides, reaction products with silica (PMN P-08-157; CAS No. 956147-76-5)...

  16. Radiation Stability of Benzyl Tributyl Ammonium Chloride towards Technetium-99 Extraction - 13016

    International Nuclear Information System (INIS)

    investigate the suitability of new macro-compounds such as crown-ethers, aza-crown ethers, quaternary ammonium salts, and resorcin-arenes for the selective extraction of Tc-99 from nitric acid solutions. The selectivity of the ligand is important in evaluating potential separation processes and also the radiation stability of the molecule is essential for minimization of waste and radiolysis products. In this paper, we are reporting the extraction of TcO4- by benzyl tributyl ammonium chloride (BTBA). Experimental efforts were focused on determining the best extraction conditions by varying the ligand's matrix conditions and concentration, as well as varying the organic phase composition (i.e. diluent variation). Furthermore, the ligand has been investigated for radiation stability. The ?-irradiation was performed on the neat organic phases containing the ligand at different absorbed doses to a maximum of 200 kGy using an external Co-60 source. Post-irradiation solvent extraction measurements will be discussed. (authors)

  17. A solid phase honey-like channel method for synthesizing urea-ammonium chloride cocrystals on industrial scale

    Science.gov (United States)

    Xue, Bingchun; Mao, Meiling; Liu, Yanhong; Guo, Jinyu; Li, Jing; Liu, Erbao

    2016-05-01

    Unanticipated a new and simple urea-ammonium chloride cocrystal synthesis method on industrial scale was found during attempts to produce a kind of granulated compound fertilizer. The aggregation of fertilizer powder can make the interaction among particles from loose to close, which generate mechanical pressure and in turn act as the driving force to benefit cocrystal growth. Additionally, the honeycomb-like channels constructed by other coexisting compound make the water evaporates more moderate, which can help the formation of supersaturated solution at suitable rate, further promote the growth of cocrystal. This approach possibly opens a new route toward the developing methodologies for cocrystal synthesis.

  18. Radiation Stability of Benzyl Tributyl Ammonium Chloride Towards Technetium-99 Extraction

    Energy Technology Data Exchange (ETDEWEB)

    Jared Horkley; Audrey Roman; Keri Campbell; Ana Nunez; Amparo Espartero

    2013-02-01

    investigate the suitability of new macrocompounds such as crown-ethers, aza-crown ethers, and resorcinarenes for the selective extraction of Tc-99 from nitric acid solutions. The selectivity of the ligand is important in evaluating potential separation processes and also the radiation stability of the molecule is essential for minimization of waste and radiolysis products. In this paper, we are reporting the extraction of TcO4- by benzyltributyl ammonium chloride (BTBA). Experimental efforts were focused on determining the best extraction conditions by varying the ligand’s matrix conditions and concentration, as well as varying the organic phase composition (i.e., diluent variation). Furthermore, the ligand has been investigated for radiation stability. The ?-irradiation was performed on the neat organic phases containing the ligand at different absorbed doses to a maximum of 200 kGy using external Co-60 source. Post-irradiation solvent extraction measurements will be discussed.

  19. N-[Isononylphenoxypoly(ethyleneoxy)carbonylmethyl]ammonium chlorides as inhibitors of metal corrosion. 1. Inhibition of steel corrosion in aqueous hydrochloric media

    International Nuclear Information System (INIS)

    New ammonium compounds of the type N-[isononylphenoxypoly (ethyleneoxy) carbonylmethyl] ammonium chlorides were synthesized. The compounds were studied as inhibitors of steel corrosion in hydrochloric aqueous media. High efficiency of the corrosion inhibitors suggested is shown. Dependence of their inhibiting properties on the type of substituents at nitrogen atom, length of hydrocarbon radicals and number of ethyleneoxide groups in isononylphenoxypoly (ethyleneoxy) carbonylmethyl radical was revealed

  20. PREPARATION AND PHOTOSENSITIVITY OF WATER SOLUBLE PHENOLIC RESINS CONTAINING ACRYLOYL AND QUATERNARY AMMONIUM CHLORIDE GROUPS

    Institute of Scientific and Technical Information of China (English)

    Xiao-ming Tan; Hong-quan Xie; Nai-yu Huang

    2002-01-01

    New water soluble and photocrosslinkable prepolymers containing acrylate and quaternary ammonium salt groups were synthesized from epoxy phenolic resin via ring-opening reaction with acrylic acid and with aqueous solution of triethylamine hydrochloride successively. The second reaction needs no phase transfer catalyst to accelerate, since the product formed can act as a phase transfer catalyst. The prepolymer obtained contains both photocrosslinkable acrylate groups and hydrophilic quaternary ammonium salt groups. Optimum conditions for these reactions were studied. The photosensitivity of the prepolymer was also investigated. The effects of different photoinitiators, different crosslinkable diluent monomers and amine accelerator on the photosensitivity of the prepolymer were compared. The photoinitiator of hydrogen abstraction type is still effective without using amine or alcohol as accelerator, because the prepolymer contains α H beside the OH groups formed in the ring-opening reactions.

  1. Ethyl­enedi­ammonium chloride thio­cyanate

    OpenAIRE

    Karoui, Sahel; Kamoun, Slaheddine; Michaud, François

    2013-01-01

    In the ethyl­enedi­ammonium dication of the title salt, C2H10N2 2+·Cl−·SCN−, the N—C—C—N torsion angle is 72.09 (12)°. In the crystal, an extensive three-dimensional hydrogen-bonding network, formed by N—H⋯Cl and N—H⋯N hydrogen bonds, holds all the ions together.

  2. AN EFFECTIVE METHOD TO IMPROVE THE WET STRENGTH OF POLY(DIALLYLDIMETHYL-AMMONIUM CHLORIDE) HYDROGELS

    Institute of Scientific and Technical Information of China (English)

    Jing Ren; Hong-fei Ha

    2002-01-01

    New IPN hydrogels composed of diallyldimethylammonium chloride (DADMAC) and natural macromolecule,kappa-carrageenan (KC) were prepared by gamma irradiation and their properties were studied. The results show that both the gel strength and the swelling capacity of the IPN hydrogels were enhanced significantly as compared with those of the pure hydrogels of PDADMAC.

  3. Corrosion mitigation of N-(2-hydroxy-3-trimethyl ammonium)propyl chitosan chloride as inhibitor on mild steel.

    Science.gov (United States)

    Sangeetha, Y; Meenakshi, S; SairamSundaram, C

    2015-01-01

    The biopolymer N-(2-hydroxy-3-trimethyl ammonium)propyl chitosan chloride (HTACC) was synthesised and its influence as a novel corrosion inhibitor on mild steel in 1M HCl was studied using gravimetric and electrochemical experiments. The compound obtained was characterised using FTIR and NMR studies. The inhibition efficiency increased with the increase in concentration and reached a maximum of 98.9% at 500 ppm concentration. Polarisation studies revealed that HTACC acts both as anodic and cathodic inhibitor. Electrochemical impedance studies confirmed that the inhibition is through adsorption on the metal surface. The extent of inhibition exhibits a negative trend with increase in temperature. Langmuir isotherm provides the best description on the adsorption nature of the inhibitor. SEM analysis indicated the presence of protective film formed by the inhibitor on the metal surface. PMID:25450546

  4. Impact of Bicarbonate, Ammonium Chloride, and Acetazolamide on Hepatic and Renal SLC26A4 Expression

    OpenAIRE

    Alesutan, Ioana; Daryadel, Arezoo; Mohebbi, Nilufar; Pelzl, Lisann; Leibrock, Christina; Voelkl, Jakob; Bourgeois, Soline; Dossena, Silvia; Nofziger, Charity; Paulmichl, Markus; Carsten A Wagner; Lang, Florian

    2011-01-01

    SLC26A4 encodes pendrin, a transporter exchanging anions such as chloride, bicarbonate, and iodide. Loss of function mutations of SLC26A4 cause Pendred syndrome characterized by hearing loss and enlarged vestibular aqueducts as well as variable hypothyroidism and goiter. In the kidney, pendrin is expressed in the distal nephron and accomplishes HCO(3)(-) secretion and Cl(-) reabsorption. Renal pendrin expression is regulated by acid-base balance. The liver contributes to acid-base regulation ...

  5. Effect of polyester blends in hydroentangled raw and bleached cotton nonwoven fabrics on the adsorption of alkyl-dimethyl-benzyl-ammonium chloride

    Science.gov (United States)

    The adsorption kinetics and isotherms of alkyl-dimethyl-benzyl-ammonium chloride (ADBAC), a cationic surfactant commonly employed as an antimicrobial agent, on hydroentangled nonwoven fabrics (applicable for wipes) including raw cotton, bleached cotton, and their blends with polyester (PES) were stu...

  6. The extraction of zinc and other minor metals from concentrated ammonium chloride solutions with D2EHPA and Cyanex 272

    Directory of Open Access Journals (Sweden)

    Amer, S.

    1995-12-01

    Full Text Available A comparative study is made of the extractants D2EHPA and Cyanex 272 for the zinc and minor metal extraction from aqueous concentrated ammonium chloride solutions, as those of the leaching liquors of the CENIM-LNETI process. Extraction equilibrium data for zinc are presented as extraction isotherms at constant pH and at a temperature of 50 °C. Zinc extraction and coextraction of minor metal ions as Cu, Ca, Pb, Mg, Cd, Co, Ni and Hg are studied. Mercury does not extract from concentrated ammonium chloride solutions. Cyanex 272 shows a better selectivity for zinc with regard to the minor metals than D2EHPA, which is especially remarkable for calcium, the most coextracted element by D2EHPA. Nickel and cadmium coextraction is negligible for both extractants. The possible use of the Cyanex 272 as an alternative to D2EHPA is considered.

    Se realiza un estudio comparativo del comportamiento del D2EHPA y del Cyanex 272 durante la extracción del cinc y otros metales minoritarios de soluciones acuosas concentradas de cloruro amónico, como las de las soluciones de lixiviación del proceso CENIM-LNETI. Se presentan los datos de equilibrio de extracción del cinc en forma de isotermas de extracción a una temperatura de 50 °C y pH constante y se estudia la coextracción de los metales minoritarios Cu, Ca, Pb, Mg, Cd, Co, Ni y Hg. El mercurio no se extrae de las soluciones concentradas de cloruro amónico. La selectividad del Cyanex 272 para el cinc respecto de esos metales minoritarios es mejor que la del D2EHPA, siendo verdaderamente notable para el calcio, que es la impureza que más se coextrae con el D2EHPA. La coextracción de níquel y de cadmio es muy pequeña para ambos extractantes. Se considera la posibilidad del uso alternativo del Cyanex 272 en lugar del D2EHPA.

  7. Sorption of uranium(VI) ions from hydrochloric acid and ammonium chloride solutions by anion exchangers

    International Nuclear Information System (INIS)

    The sorption of macroscopic quantities of uranium from solutions of UO2Cl2 containing HCl and NH4Cl in concentrations from 0.0 to 6.0 M by the AV-17 x 8, AV-16G, EDE-10P, AN-31, AN-2F, AN22, and AN-251 anion exchangers has been investigated under static conditions. The sorption isotherms are described by an equation similar to Freundlich's equation: K/sub d/ = K tilde x C/sub eq/sup 1/z/ or log K/sub d/ = log K tilde + 1/z x log C/sub eq/. Equations describing the dependence of the sorbability (or K/sub d/) on the equilibrium concentration of uranium in the solution have been obtained with the aid of the least-squares method. Conclusions regarding the chemistry of the exchange of uranium ions on anion exchangers in chloride solutions have been drawn on the basis of the UV spectra of the original solutions and the IR spectra of the ion exchangers obtained in this work, as well as the established general laws governing sorption

  8. Sorption of uranium(VI) ions from hydrochloric acid and ammonium chloride solutions by anion exchangers

    Energy Technology Data Exchange (ETDEWEB)

    Pakholkov, V.S.; Denisova, L.A.; Rychkov, V.N.; Kurnosenko, N.A.

    1988-01-01

    The sorption of macroscopic quantities of uranium from solutions of UO/sub 2/Cl/sub 2/ containing HCl and NH/sub 4/Cl in concentrations from 0.0 to 6.0 M by the AV-17 x 8, AV-16G, EDE-10P, AN-31, AN-2F, AN22, and AN-251 anion exchangers has been investigated under static conditions. The sorption isotherms are described by an equation similar to Freundlich's equation: K/sub d/ = K tilde x C/sub eq/sup 1/z/ or log K/sub d/ = log K tilde + 1/z x log C/sub eq/. Equations describing the dependence of the sorbability (or K/sub d/) on the equilibrium concentration of uranium in the solution have been obtained with the aid of the least-squares method. Conclusions regarding the chemistry of the exchange of uranium ions on anion exchangers in chloride solutions have been drawn on the basis of the UV spectra of the original solutions and the IR spectra of the ion exchangers obtained in this work, as well as the established general laws governing sorption.

  9. Methacryloxylethyl Cetyl Ammonium Chloride Induces DNA Damage and Apoptosis in Human Dental Pulp Cells via Generation of Oxidative Stress.

    Science.gov (United States)

    Jiao, Yang; Ma, Sai; Wang, Yirong; Li, Jing; Shan, Lequn; Sun, Jinlong; Chen, Jihua

    2016-01-01

    The polymerizable antibacterial monomer methacryloxylethyl cetyl ammonium chloride (DMAE-CB) has provided an effective strategy to combat dental caries. However, the application of such material raises the question about the biological safety and the question remains open. The mechanism of this toxic action, however, is not yet clearly understood. The present study aims at providing novel insight into the possible causal link between cellular oxidative stress and DNA damage, as well as apoptosis in human dental pulp cells exposed to DMAE-CB. The enhanced formation of reactive oxygen species and depletion of glutathione, as well as differential changes in activities of superoxide dismutase, glutathione peroxidase, and catalase in DMAE-CB-treated cells indicated oxidative stress. By using substances that can alter GSH synthesis, we found that GSH was the key component in the regulation of cell response towards oxidative stress induced by DMAE-CB. The increase in oxidative stress-sensitive 8-Oxo-2'-deoxyguanosine (8-OHdG) content, formation of γ-H2AX and cell cycle G1 phase arrest indicated that DNA damage occurred as a result of the interaction between DNA base and ROS beyond the capacities of antioxidant mechanisms in cells exposed to DMAE-CB. Such oxidative DNA damage thus triggers the activation of ataxia telangiectasia-mutated (ATM) signaling, the intrinsic apoptotic pathway, and destruction of mitochondrial morphology and function. PMID:27143955

  10. Methacryloxylethyl Cetyl Ammonium Chloride Induces DNA Damage and Apoptosis in Human Dental Pulp Cells via Generation of Oxidative Stress

    Science.gov (United States)

    Jiao, Yang; Ma, Sai; Wang, Yirong; Li, Jing; Shan, Lequn; Sun, Jinlong; Chen, Jihua

    2016-01-01

    The polymerizable antibacterial monomer methacryloxylethyl cetyl ammonium chloride (DMAE-CB) has provided an effective strategy to combat dental caries. However, the application of such material raises the question about the biological safety and the question remains open. The mechanism of this toxic action, however, is not yet clearly understood. The present study aims at providing novel insight into the possible causal link between cellular oxidative stress and DNA damage, as well as apoptosis in human dental pulp cells exposed to DMAE-CB. The enhanced formation of reactive oxygen species and depletion of glutathione, as well as differential changes in activities of superoxide dismutase, glutathione peroxidase, and catalase in DMAE-CB-treated cells indicated oxidative stress. By using substances that can alter GSH synthesis, we found that GSH was the key component in the regulation of cell response towards oxidative stress induced by DMAE-CB. The increase in oxidative stress-sensitive 8-Oxo-2'-deoxyguanosine (8-OHdG) content, formation of γ-H2AX and cell cycle G1 phase arrest indicated that DNA damage occurred as a result of the interaction between DNA base and ROS beyond the capacities of antioxidant mechanisms in cells exposed to DMAE-CB. Such oxidative DNA damage thus triggers the activation of ataxia telangiectasia-mutated (ATM) signaling, the intrinsic apoptotic pathway, and destruction of mitochondrial morphology and function.

  11. Crystal structure of tetra­ethyl­ammonium chloride 3,4,5,6-tetra­fluoro-1,2-di­iodo­benzene

    OpenAIRE

    Viger-Gravel, Jasmine; Korobkov, Ilia; Bryce, David L.

    2015-01-01

    Equimolar qu­anti­ties of tetra­ethyl­ammonium chloride (Et4NCl) and 3,4,5,6-tetra­fluoro-1,2-di­iodo­benzene (o-DITFB or o-C6F4I2) have been co-crystallized in a solution of di­chloro­methane yielding a pure halogen-bonded compound, 3,4,5,6-tetra­fluoro-1,2-di­iodo­benzene–tetra­ethyl ammonium chloride (2/1), Et4N+·Cl−·2C6F4I2, in the form of translucent needles. [(Et4NCl)(o-C6F4I2)2] packs in the C2/c space group. The asymmetric unit includes one mol­ecule of DITFB, one Et4N+ cation located...

  12. EQCM study of the electrodeposition of manganese in the presence of ammonium thiocyanate in chloride-based acidic solutions

    Energy Technology Data Exchange (ETDEWEB)

    Diaz-Arista, P. [Centro de Investigacion y Desarrollo Tecnologico en Electroquimica (CIDETEQ), Parque Tecnologico Sanfandila, Pedro Escobedo, Queretaro, A.P. 064, C.P. 76700, Queretaro (Mexico); Antano-Lopez, R. [Centro de Investigacion y Desarrollo Tecnologico en Electroquimica (CIDETEQ), Parque Tecnologico Sanfandila, Pedro Escobedo, Queretaro, A.P. 064, C.P. 76700, Queretaro (Mexico); Meas, Y. [Centro de Investigacion y Desarrollo Tecnologico en Electroquimica (CIDETEQ), Parque Tecnologico Sanfandila, Pedro Escobedo, Queretaro, A.P. 064, C.P. 76700, Queretaro (Mexico); Ortega, R. [Centro de Investigacion y Desarrollo Tecnologico en Electroquimica (CIDETEQ), Parque Tecnologico Sanfandila, Pedro Escobedo, Queretaro, A.P. 064, C.P. 76700, Queretaro (Mexico); Chainet, E. [LEPMI, ENSEEG, 1130, rue de la piscine, BP 45, 38402 Saint Martin d' Heres (France); Ozil, P. [LEPMI, ENSEEG, 1130, rue de la piscine, BP 45, 38402 Saint Martin d' Heres (France); Trejo, G. [Centro de Investigacion y Desarrollo Tecnologico en Electroquimica (CIDETEQ), Parque Tecnologico Sanfandila, Pedro Escobedo, Queretaro, A.P. 064, C.P. 76700, Queretaro (Mexico)]. E-mail: gtrejo@cideteq.mx

    2006-06-01

    The influence of ammonium thiocyanate (NH{sub 4}SCN) on the mechanism of manganese electrodeposition from a chloride-based acidic solution was investigated by cyclic voltammetry and electrochemical quartz crystal microbalance (EQCM). The EQCM data were represented as plots d{delta}m dt {sup -1} versus E, known as massograms. Because massograms are not affected by interference from the hydrogen evolution reaction, they clearly show the manganese reduction and oxidation processes. By comparing the voltammograms with their corresponding massograms, it was possible to differentiate mass changes due to faradaic processes from those due to non-faradaic processes. Morphology, chemical composition and structure of the manganese deposits formed in different potential ranges were analyzed by scanning electron microscopy (SEM), energy dispersion spectroscopy (EDS), and X-ray diffraction (XRD). The results showed that in the absence of NH{sub 4}SCN, Mn(OH){sub 2(s)} is formed in the potential range -1.1 to -0.9 V due to the hydrogen evolution reaction in this region. At more cathodic potentials, the deposition of {beta}-manganese and the inclusion of Mn(OH){sub 2(s)} into the deposit occur; both of these species underwent dissolution by non-faradaic processes during the anodic scan. In the presence of NH{sub 4}SCN, the formation of {alpha}- and {gamma}-manganese was observed. When the potential was {<=}-1.8 V and [NH{sub 4}SCN] exceeded 0.3 M, the {alpha}-manganese phase was favored.

  13. Extraction of Ca (II) and Mg (II) from Hydrochloric Acid Solutions by N, N-Dioctyl-1-Octan Ammonium Chloride in Methyl Isobutyl Ketone

    OpenAIRE

    Fatmir Faiku; Arben Haziri; Imer Haziri; Sali Aliu; Nita Sopa

    2012-01-01

    Problem statement: Amines as organic molecules are able to form complexes with metals ions and this is the reason why we can use them to extract metals ions from hydrometallurgical solutions. Approach: Based on that, we have investigated the extraction of Calcium and Magnesium with N, N-dioctyl-1-octan ammonium chloride from the mixture of elements (Ca and Mg) prepared in artificial manner. We have investigated the influence of HCl concentration and salts (NaCl, NaI and CH3COONa) concentratio...

  14. Structural characterization of zinc(II) chloride in aqueous solution and in the protic ionic liquid ethyl ammonium nitrate by x-ray absorption spectroscopy

    Science.gov (United States)

    D'Angelo, Paola; Zitolo, Andrea; Ceccacci, Francesca; Caminiti, Ruggero; Aquilanti, Giuliana

    2011-10-01

    Extended x-ray absorption fine structure (EXAFS) spectroscopy has been used to investigate the species and structures existing in a series of ZnCl2-H2O-NaCl solutions with different chloride/zinc ratios and in a solution of ZnCl2 in the protic ionic liquid ethyl ammonium nitrate (EAN). The average coordination numbers and distances of zinc species were determined from the analysis of the EXAFS data. In aqueous solution the number of chloride ions tightly bounded to Zn2+ is significantly related to the chloride/zinc ratio, and no inner complex formation between Zn2+ and Cl- ions has been detected for low ZnCl2 concentration (0.1 and 0.2 M). Conversely, in the same concentration range (0.13 M) the ZnCl2 species do not dissociate in EAN and the Zn2+ first coordination shell has two chloride ions and is completed by two oxygen atoms of the nitrate anion. The results of this investigation show that notwithstanding the existence of similar characteristics between EAN and water, the solvation properties of the two solvents are markedly different.

  15. Modified potentiometric poly(vinyl chloride)nonactin membrane electrode: an improved transducer for the selective detection of ammonium ions

    International Nuclear Information System (INIS)

    Ion selective electrode technique is an effective analytical approach for detecting or assaying various ions of interest. Broadly it can be classified into glass, liquid and polymer type membrane electrodes. Among these, polymer based membrane sensors are relatively easy to manufacture and can be designed as per requirement, particularly regarding miniaturization. The main source of ammonium ions in environment is the biodegradation of bio waste and chemical industry. Detection of ammonium ions is of primary importance regarding the biological activity of water reservoirs/marine life. The available photometric techniques can monitor ammonium ions effectively, however, disadvantages like sample processing and chances of contamination exist. In the present study a potentiometric ammonium ions transducer based on PVC-non actin membrane has been developed and optimized. Its effective use in the development of bio sensors has been proposed. These types of bio sensors are fabricated by immobilizing appropriate enzyme for a particular bio product. The end product of the catalysis is sensed by the transducer. (author)

  16. Nontoxic, Inexpensive, Ammonium Chloride-Mediated (In Water) Synthesis of Some Novel 1,5-benzothiazepine Derivatives and Their Antimicrobial Activity

    International Nuclear Information System (INIS)

    In the present study, a new, nontoxic, easy and inexpensive method for the synthesis of 1,5-benzothiazepine derivatives was described and a mechanism for this reactions was proposed. Ammonium chloride which is inexpensive and readily available reagent catalyzes the thia-michael addition reaction of thiols in water efficiently. 1,5-benzothiazepines derivatives were synthesized by the condensation reactions of o-aminothiophenol (o-ATP) with chalcone derivatives by using saturated solution of NH/sub 4/Cl in water. The products were characterized by the elemental analysis, NMR and FT-IR techniques. Synthesized compounds were tested for antimicrobial activity against. Staphylococcus aureus ATCC 6538, Escherichia coli ATCC 25922, Bacillus subtilis IMG22 and Candida albicans ATCC 10231. Among the synthesized compounds 2b was found to be most active derivative against Escherichia coli ATCC 25922 and Candida albicans ATCC 10231. The other compounds didn't exhibit any activity against the other test microorganisms. (author)

  17. Theoretical study of the reaction of chitosan monomer with 2,3-epoxypropyl-trimethyl quaternary ammonium chloride catalyzed by an imidazolium-based ionic liquid.

    Science.gov (United States)

    Mu, Xueli; Yang, Xiaodeng; Zhang, Dongju; Liu, Chengbu

    2016-08-01

    The molecular mechanism of the graft reaction of 2,3-epoxypropyl-trimethyl quaternary ammonium chloride with chitosan monomer was investigated by performing density functional theory (DFT) calculations. The calculated results show that the -NH2 group of chitosan monomer is more reactive than its -OH and -CH2OH groups, and the graft reaction on the -NH2 group is calculated to be exothermic by 20.5kcal/mol with a free energy barrier of 42.6kcal/mol. The reaction cannot benefit from the presence of the intruded water molecule, but can be considerably assisted by 1-allyl-3-methylimidazolium chloride ([Amim]Cl) ionic liquid. The reaction catalyzed by the ion-pair is calculated to be exothermic by 36.5kcal/mol and the barrier is reduced to 29.3kcal/mol, which are further corrected to 28.0 and 29.1kcal/mol by considering the solvent effect of [Amim]Cl ionic liquid. Calculated results verified the experimental finding that imidazolium-based ionic liquids can promote the reaction of chitosan with epoxy compounds. PMID:27112849

  18. Computational Study of the Structure and Thermodynamic Properties of Ammonium Chloride Clusters Using a Parallel J-Walking Approach

    CERN Document Server

    Matro, A; Topper, R Q; Matro, Alexander; Freeman, David L.; Topper, Robert Q.

    1996-01-01

    The thermodynamic and structural properties of (NH$_4$Cl)$_n$ clusters, n=3-10 are studied. Using the method of simulated annealing, the geometries of several isomers for each cluster size are examined. Jump-walking Monte Carlo simulations are then used to compute the constant-volume heat capacity for each cluster size over a wide temperature range. To carry out these simulations a new parallel algorithm is developed using the Parallel Virtual Machine (PVM) software package. Features of the cluster potential energy surfaces, such as energy differences among isomers and rotational barriers of the ammonium ions, are found to play important roles in determining the shape of the heat capacity curves.

  19. 氯化铵和氯化钾对太湖黄泥土磷的吸持动力学影响的研究%Effects of ammonium chloride and potassium chloride on kinetics of phosphorus sorption of Taihu Paddy soil

    Institute of Scientific and Technical Information of China (English)

    李寿田; 周健民; 王火焰; 杜昌文; 陈小琴

    2012-01-01

    土壤中磷的移动性、植物有效性和对水体环境的潜在危害性与土壤对磷的吸持反应有关,而铵钾磷共施是农业生产中的普遍现象,因此,本文通过批量培养法,研究了相同摩尔数的氯化铵和氯化钾对磷的吸持动力学的影响,并对磷的吸持动力学进行了不同模型的拟合.结果表明,氯化铵、氯化钾均显著增加了土壤对磷的吸持,在培养初期(5 min),相同摩尔数的氯化铵、氯化钾对磷的吸持量无显著差异,但在15 min ~ 10 d阶段,相同摩尔数的氯化钾对磷吸持量的影响显著大于相同摩尔数的氯化铵.而铵钾共施时,两者对磷的吸持具有协同作用,并主要表现为氯化钾的作用.氯化铵对土壤磷吸持总量无显著影响,氯化钾则显著增加了土壤磷吸持总量,氯化钾和氯化铵处理土壤磷吸收总量则无显著差异.通过比较不同模型拟合的决定系数(R2)大小,不同模型拟合效果顺序为Elovich方程>双常数方程>Parabolic扩散方程>零级方程>一级方程>二级方程.%Translocation, plant availability, and hazard potential to water environment of soil phosphorus are related with phosphorus sorption of soil, and it is very common to apply fertilizer by compounding ammonium, potassium and phosphorus together in agricultural production. In this article, the effects of ammonium chloride and potassium chloride on kinetics of phosphorus sorption of paddy soil were conducted by the batch culture, and kinetics of phosphorus sorption was fitted to different models. The results showed that amounts of adsorbed phosphorus were significantly increased by the addition of ammonium chloride and potassium chloride, and there is no significant difference in amounts of phosphorus sorption between ammonium chloride and potassium chloride at the same mole number at the initial culture period, but amounts of phosphorus sorption treated with potassium chloride was significantly more than

  20. Ammonium chloride salting out extraction/cleanup for trace-level quantitative analysis in food and biological matrices by flow injection tandem mass spectrometry.

    Science.gov (United States)

    Nanita, Sergio C; Padivitage, Nilusha L T

    2013-03-20

    A sample extraction and purification procedure that uses ammonium-salt-induced acetonitrile/water phase separation was developed and demonstrated to be compatible with the recently reported method for pesticide residue analysis based on fast extraction and dilution flow injection mass spectrometry (FED-FI-MS). The ammonium salts evaluated were chloride, acetate, formate, carbonate, and sulfate. A mixture of NaCl and MgSO4, salts used in the well-known QuEChERS method, was also tested for comparison. With thermal decomposition/evaporation temperature of residual under typical electrospray conditions, leading to consistent method performance and less instrument cleaning. Although all ammonium salts tested induced acetonitrile/water phase separation, NH4Cl yielded the best performance, thus it was the preferred salting out agent. The NH4Cl salting out method was successfully coupled with FI/MS/MS and tested for fourteen pesticide active ingredients: chlorantraniliprole, cyantraniliprole, chlorimuron ethyl, oxamyl, methomyl, sulfometuron methyl, chlorsulfuron, triflusulfuron methyl, azimsulfuron, flupyrsulfuron methyl, aminocyclopyrachlor, aminocyclopyrachlor methyl, diuron and hexazinone. A validation study was conducted with nine complex matrices: sorghum, rice, grapefruit, canola, milk, eggs, beef, urine and blood plasma. The method is applicable to all analytes, except aminocyclopyrachlor. The method was deemed appropriate for quantitative analysis in 114 out of 126 analyte/matrix cases tested (applicability rate=0.90). The NH4Cl salting out extraction/cleanup allowed expansion of FI/MS/MS for analysis in food of plant and animal origin, and body fluids with increased ruggedness and sensitivity, while maintaining high-throughput (run time=30s/sample). Limits of quantitation (LOQs) of 0.01mgkg(-1) (ppm), the 'well-accepted standard' in pesticide residue analysis, were achieved in >80% of cases tested; while limits of detection (LODs) were typically in the range of 0

  1. Extraction of Ca (II and Mg (II from Hydrochloric Acid Solutions by N, N-Dioctyl-1-Octan Ammonium Chloride in Methyl Isobutyl Ketone

    Directory of Open Access Journals (Sweden)

    Fatmir Faiku

    2012-01-01

    Full Text Available Problem statement: Amines as organic molecules are able to form complexes with metals ions and this is the reason why we can use them to extract metals ions from hydrometallurgical solutions. Approach: Based on that, we have investigated the extraction of Calcium and Magnesium with N, N-dioctyl-1-octan ammonium chloride from the mixture of elements (Ca and Mg prepared in artificial manner. We have investigated the influence of HCl concentration and salts (NaCl, NaI and CH3COONa concentration in extraction of two elements (Ca and Mg from water solutions. All extractions were done from HCl water solutions with c = 3, 6 and 9 mol L-1 and in presence of NaCl, NaI and CH3COONa salts, which we prepared in different concentrations. Results: Extraction of Calcium from NaCl solution move from 18-30%, from NaI solution 55-77% and from CH3COONa solution 50-71%. Extraction of Magnesium from NaCl solution move from 3-12%, from NaI solution 0-11% and from CH3COONa solution 0-8%. Conclusion: As optimal condition to separate Calcium from Magnesium is the extraction of Calcium from HCl solution with concentration 9 mol L-1 in presence of NaI with concentration of 60 g L-1. Using these condition 77% of Calcium was in organic phase and all of magnesium remains in water phase.

  2. Application of In-Line Mid-Infrared (MIR) Spectroscopy Coupled with Calorimetry for the Determination of the Molar Enthalpy of Reaction between Ammonium Chloride and Sodium Nitrite.

    Science.gov (United States)

    Kartnaller, Vinicius; Mariano, Danielly C O; Cajaiba, João

    2016-03-01

    The reaction between ammonium chloride and sodium nitrite has been known for its application as a source of heat because of its large enthalpy of reaction, for which it has been used by the oil industry. There have been no known calorimetric studies for the experimental determination of its molar enthalpy of reaction, which is necessary in order to predict the limits achieved for up-scale applications. Attenuated total reflection Fourier transform infrared spectroscopy (ATR FT-IR) and reaction calorimetry were used to determine this value by using a simple methodology. Both techniques were used concomitantly as a source of information regarding the time-dependent moles converted (Δn) and the amount of exchanged heat (ΔH). The molar enthalpy of reaction was calculated to be -74 ± 4 kcal mol(-1). The percentage between the confidence interval and the calculated value was 5.4%, which shows that the methodology was precise. After the determination of the molar enthalpy of reaction, it was proved that the ATR FT-IR alone was able to be used as a substitute for the reaction calorimetry technique, in which the IR signal is converted to the heat information, presenting as an easier technique for the monitoring of the heat released by this system for future applications. PMID:26798078

  3. Guest gas enclathration in tetra-n-butyl ammonium chloride (TBAC) semiclathrates: Potential application to natural gas storage and CO2 capture

    International Nuclear Information System (INIS)

    Highlights: • TBAC forms semiclathrates with CH4 and CO2. • The highest stabilization of TBAC semiclathrates was observed at 3.3 mol%. • The inclusion of CH4 and CO2 in semiclathrates was examined via spectroscopic methods. • TBAC semiclathrates can be applied to gas storage and CO2 capture. - Abstract: The enclathration of guest gases such as CH4 and CO2 in tetra-n-butyl ammonium chloride (TBAC) semiclathrates and their potential application to natural gas storage and CO2 capture were examined with a primary focus on stability condition measurements and cage filling characteristics. The phase behaviors clearly demonstrated that the double CH4 (or CO2) + TBAC semiclathrates yielded a significantly enhanced thermodynamic stability. In particular, the highest stabilization occurred at 3.3 mol%, the stoichiometric concentration of TBAC·29.7H2O. The cage-dependent 13C NMR chemical shift identified CH4 molecules enclathrated in the small 512 cages of the double TBAC semiclathrates. CO2 inclusion in the double TBAC semiclathrate was also confirmed using Raman spectroscopy. In addition, the dissociation enthalpy and the dissociation temperature of the TBAC semiclathrate under atmospheric pressure were measured to be 204.8 ± 1.7 J/g and 288.0 K, respectively, by a differential scanning calorimeter. The experimental results demonstrate that TBAC semiclathrates can potentially be used for gas storage and CO2 capture due to their high thermodynamic stability and favorable enclathration characteristics of guest gases

  4. Processo de organofilização de vermiculia brasileira com cloreto de cetiltrimetilamônio Organophilization process of Brazilian vermiculite with cetyltrimethyl ammonium chloride

    Directory of Open Access Journals (Sweden)

    E. V. D Gomes

    2010-03-01

    Full Text Available A vermiculita, argila da família dos aluminossilicatos 2:1 proveniente do estado de Goiás, Brasil, foi utilizada para a produção de uma argila organofílica. A vermiculita foi primeiramente submetida ao tratamento com cloreto de sódio para a obtenção de uma argila homoiônica sódica. A argila organofílica foi, então, obtida a partir da síntese com o sal de amônio quaternário, cloreto de cetiltrimetil amônio. As argilas, tratada com o sal orgânico e a não tratada, foram caracterizadas por espectrometria de fluorescência de raios X, espectroscopia de absorção na região do infravermelho, difração de raios X e análise termogravimétrica. Os resultados de fluorescência de raios X evidenciaram a mudança na composição química da vermiculita após as reações de troca com NaCl e sal orgânico. Os resultados obtidos por espectroscopia de absorção na região do infravermelho mostraram a presença dos grupos característicos do sal na argila e os de difração de raios X confirmaram sua intercalação entre as camadas da argila. Os resultados de análise termogravimétrica mostraram que a argila organofílica apresentou outras faixas de decomposição, além daquelas apresentadas pela vermiculita natural, correspondentes à decomposição do sal de amônio quaternário.The vermiculite (VMT, 2:1 aluminosilicate family clay from the state of Goiás, Brazil, was used for the production of an organophilic clay. First, the VMT was treated with sodium chloride to obtain the homo-ionic sodium clay. The organophilic clay was, then, obtained from the reaction with the quaternary ammonium salt, cetyltrimethyl ammonium chloride. The clay treated with organic salt and the untreated one were characterized by X-ray fluorescence spectrometry (XRF, Fourier transform infrared spectroscopy (FTIR, X-ray diffraction (XRD and thermogravimetric analysis (TGA. The results of XRF evidenced the change in the chemical composition of the VMT after the

  5. Optimization of structural and dielectric properties of CdSe loaded poly(diallyl dimethyl ammonium chloride) polymer in a desired frequency and temperature window

    Energy Technology Data Exchange (ETDEWEB)

    Tyagi, Chetna, E-mail: ctyagi05@gmail.com; Sharma, Ambika, E-mail: ambikasharma2004@yahoo.com [Department of Applied Sciences, The NorthCap University (Formerly ITM University), Gurgaon, 122017 Haryana (India)

    2016-01-07

    In the present paper, investigations of CdSe loaded poly(diallyl dimethyl ammonium chloride) (PDADMAC) nanocomposites and pure PDADMAC synthesized by wet chemical technique have been carried out. Fourier transform infrared and X-ray diffraction analysis have been performed to reveal the structural details of pure polymer and polymer nanocomposite (PNC). The dielectric behavior of pure polymer and PNC has been recorded, which results in higher value of the real and imaginary part of dielectric constant for PNC, as compared with pure PDADMAC. The increase is attributed to the addition of CdSe quantum dots to the pure polymer. The contribution of ionic and electronic polarization has been observed at higher frequency. The theoretical fitting of Cole-Cole function to the experimental data of dielectric constant of PNC and pure PDADMAC results in the determination of relaxation time and conductivity of space charge carriers. The CdSe loaded polymer nanocomposite has been used as an electrolyte in the battery fabrication with configuration Al/PNC/Ag{sub 2}O. The ac conductivity measurements have been carried out for both samples in a frequency window of 1 kHz–5 MHz and at different temperatures varying from 298 K to 523 K. Activation energy (E{sub a}) has been determined for pure polymer as well as PNC and is found to be less for PNC, as compared with pure polymer. Further, impedance measurement at different temperatures results in two frequency ranges corresponding to ionic conduction and blocking electrode effect. The value of bulk resistance for pure polymer and PNC has been found to be 3660 Ω and 442 Ω, respectively, at 298 K temperature. Electric modulus has been determined and is observed to support the dielectric constant data; it further reveals the deviation from Debye behavior at a higher frequency.

  6. Biological evaluation of N-2-hydroxypropyl trimethyl ammonium chloride chitosan as a carrier for the delivery of live Newcastle disease vaccine.

    Science.gov (United States)

    Zhao, Kai; Sun, Yanwei; Chen, Gang; Rong, Guangyu; Kang, Hong; Jin, Zheng; Wang, Xiaohua

    2016-09-20

    Mucosal immune system plays a very important role in antiviral immune response. We prepared Newcastle disease viruses (NDV) encapsulated in N-2-hydroxypropyl trimethyl ammonium chloride chitosan (N-2-HACC) nanoparticles (NDV/La Sota-N-2-HACC-NPs) by an ionic cross linking method, and assessed the potential of N-2-HACC-NPs as a mucosal immune delivery carrier. The properties of the nanoparticles were determined by transmission electron microscopy, Zeta potential and particle size analysis, encapsulation efficiency and loading capacity. NDV/La Sota-N-2-HACC-NPs have regular spherical morphologies and high stability; with 303.88±49.8nm mean diameter, 45.77±0.75mV Zeta potential, 94.26±0.42% encapsulation efficiency and 54.06±0.21% loading capacity. In vitro release assay indicated that the release of NDV from NDV/La Sota-N-2-HACC-NPs is slow. The NDV/La Sota-N-2-HACC-NPs have good biological characteristics, very low toxicity and high level of safety. Additionally, specific pathogen-free chickens immunized with NDV/La Sota-N-2-HACC-NPs showed much stronger cellular, humoral and mucosal immune responses than commercial attenuated live Newcastle disease vaccine, and NDV/La Sota-N-2-HACC-NPs reached the sustainable release effect. Our study here provides a foundation for the further development of mucosal vaccines and drugs, and the N-2-HACC-NPs should be a potential drug delivery carrier with immense potential in medical applications. PMID:27261727

  7. Optimization of structural and dielectric properties of CdSe loaded poly(diallyl dimethyl ammonium chloride) polymer in a desired frequency and temperature window

    International Nuclear Information System (INIS)

    In the present paper, investigations of CdSe loaded poly(diallyl dimethyl ammonium chloride) (PDADMAC) nanocomposites and pure PDADMAC synthesized by wet chemical technique have been carried out. Fourier transform infrared and X-ray diffraction analysis have been performed to reveal the structural details of pure polymer and polymer nanocomposite (PNC). The dielectric behavior of pure polymer and PNC has been recorded, which results in higher value of the real and imaginary part of dielectric constant for PNC, as compared with pure PDADMAC. The increase is attributed to the addition of CdSe quantum dots to the pure polymer. The contribution of ionic and electronic polarization has been observed at higher frequency. The theoretical fitting of Cole-Cole function to the experimental data of dielectric constant of PNC and pure PDADMAC results in the determination of relaxation time and conductivity of space charge carriers. The CdSe loaded polymer nanocomposite has been used as an electrolyte in the battery fabrication with configuration Al/PNC/Ag2O. The ac conductivity measurements have been carried out for both samples in a frequency window of 1 kHz–5 MHz and at different temperatures varying from 298 K to 523 K. Activation energy (Ea) has been determined for pure polymer as well as PNC and is found to be less for PNC, as compared with pure polymer. Further, impedance measurement at different temperatures results in two frequency ranges corresponding to ionic conduction and blocking electrode effect. The value of bulk resistance for pure polymer and PNC has been found to be 3660 Ω and 442 Ω, respectively, at 298 K temperature. Electric modulus has been determined and is observed to support the dielectric constant data; it further reveals the deviation from Debye behavior at a higher frequency

  8. 2-羟丙基三甲基氯化铵壳聚糖的制备及其抗菌性分析%Characterization and Antimicrobial Activity of 2-Hydroxypropyltrimethyl Ammonium Chloride Chitosan

    Institute of Scientific and Technical Information of China (English)

    龚安华; 吴涛; 吴静; 钱琛

    2012-01-01

    The water-soluble quaternary ammonium salt of 2-hydroxypropyltrimethyl ammonium chloride chitosan (HTCC) was successfully prepared by the reaction of chitosan with 2, 3-epoxypropyl trimethyl ammonium chloride (CTA). The structure of HTCC was characterized by FTIR and 1H NMR, and in vitro antimicrobial activities of HTCC were investigated systematically. The results indicated that the non-woven fabrics which had been immersed in HTCC solution demonstrated good antimicrobial activity against Escherichia coli and Campylobacter jejuni. The minimum inhibitory concentration (MIC) of HTCC solution against C. Jejuni was 8 mg/mL. The results indicated that HTCC was a potential polymeric antimicrobial.%以2,3-环氧丙基三甲基氯化铵(GTA)和壳聚糖为原料制备水溶性的壳聚糖季铵盐2-羟丙基三甲基氯化铵壳聚糖(HTCC),采用傅立叶红外光谱仪(FTIR谱图)和核磁共振仪(1H-NMR图谱)表征HTCC的结构,并进行抗菌性研究.结果表明,HTCC溶液和浸泡过HTCC的无纺布对大肠杆菌(Escherichia coli)和空肠弯曲菌(Campylobacter jejuni)有抑菌效果,其中对空肠弯曲菌的最低抑菌浓度(MIC)为8mg/mL,说明HTCC是一种具有应用潜力的高分子抗菌剂.

  9. 氯化铵对泌乳奶牛生产性能及血尿代谢的影响%Effects of Ammonium Chloride on Performance, Serum and Urine Metabolism of Lactating Cows

    Institute of Scientific and Technical Information of China (English)

    王坤; 赵圃毅; 刘威; 卜登攀; 刘士杰; 张开展

    2016-01-01

    The present study evaluated the effects of ammonium chloride on performance, serum and urine me⁃tabolism of lactating cows to determine the optimal supplemental level for lactating dairy cows. Forty⁃eight Hol⁃stein dairy cows, similarly in days in milk, body weight, milk yield and parity, were randomly assigned to 1 of 4 groups with 12 cows according to a completely randomized design. The supplemental level of ammonium chloride was 0 ( control) , 150, 300 and 450 g/d, respectively. The pre⁃trial lasted for 14 days and the trial lasted 56 days. The results showed as follows:1) dry matter intake ( P=0.012) and milk yield ( P=0.008) decreased linearly as the supplemental level of ammonium chloride increased, and 300 and 450 g/d groups were significantly lower than control group (P0.05) , while milk protein percentage tended to be linearly increased ( P=0.094). 2) Urine pH decreased quadratically as ammonium chloride supplemental level increased ( P =0.012), and 300 and 450 g/d groups were significantly lower than control group (P<0.05); the concentra⁃tions of serum Cl-(P=0.002) and urine Cl-(P=0.004), Ca2+(P<0.001), P5+(P=0.017) and Mg2+(P=0.048) increased linearly as the supplemental level of ammonium chloride increased. 3) Serum urea concentra⁃tion increased linearly as ammonium chloride supplemental level increased ( P=0.018) , and 300 and 450 g/d groups were significantly higher than control group ( P<0.05) . In conclusion, ammonium chloride supplemen⁃tal level of lactating dairy cows should not exceed 300 g/d, and a more appropriate supplemental level is 150 g/d.%本试验通过探究饲粮添加不同水平的氯化铵对泌乳奶牛生产性能及血尿代谢的影响,旨在确定氯化铵在泌乳奶牛饲粮中的适宜添加量。采用完全随机设计,将48头泌乳日龄、体重、胎次及产奶量相近的中国荷斯坦奶牛随机分为4组,每组12头,各组氯化铵添加量分别为每头牛0(对照)、150、300和450 g

  10. Determination of Ephedrine and Ammonium Chloride in Tingke Syrups%停咳糖浆中盐酸麻黄碱与氯化铵的含量测定

    Institute of Scientific and Technical Information of China (English)

    区洁雯; 吕冠欣; 孙俊军; 廖永清

    2013-01-01

    Objective:To establish a method for the determination of ephedrine and ammonium chloride in Tingke syrups by HPLC and nitrometry.Method:The analysis of ephedrine was performed on an Agilent ZORBAX SB-C18 (250 mm ×4.6 mm,5 μm)column with 0.1% phosphoric acid (containing 0.1% triethylamine)-methyl cyanides (95∶5) as the mobile phase.The flow rate was 1.0 ml · min-1 and the detection wavelength was 205 nm at 30℃.The analysis of ammonium chloride was performed by nitrometry with 0.05 mol · l-1 sulfuric acid titrant.Result:The linear range of ephedrine was 8.176-65.408 μg · ml-1 (r =0.999 9),and the average recovery was 102.0% (RSD =0.6%,n =6).The average recovery of ammonium chloride was 99.25% (RSD =0.3%,n =6).Conclusion:The methods are accurate and reproducible,and can be used in the quality control of the preparation.%目的:分别建立HPLC法和氮测定法对停咳糖浆中的盐酸麻黄碱和氯化铵进行含量测定.方法:盐酸麻黄碱的测定采用Agilent ZORBAX SB-C18(250 mm×4.6 mm,5μm)色谱柱,0.1%磷酸溶液(含0.1%三乙胺)-乙腈(95∶5)为流动相,流速为1.0ml·min-1,检测波长为205 nm,柱温为30℃.氯化铵的测定以0.05 mol·L-1硫酸滴定液采用氮测定法测定.结果:盐酸麻黄碱在8.176~65.408 μg· ml-1范围内呈良好的线性关系(r=0.999 9),平均回收率为102.0%,RSD为0.6%(n=6),氯化铵的平均回收率为99.25%,RSD为0.3%(n=6).结论:该方法重复性好,准确,可用于该制剂的质量控制.

  11. A novel water-soluble anionic conjugated copolymer containing poly(p-phenylene vinylene) segments: Copolymer synthesis and multilayer construction by assembling poly(diallyl dimethyl ammonium chloride)

    Institute of Scientific and Technical Information of China (English)

    ZHANG Bao; LIN Hang; TANG Jun; LIU JunSong

    2009-01-01

    This paper reports the synthesis of a water soluble conjugated polymer poly(p-phenylene vinylene-co-sodium methacrylate) (ws-P(PV-co-SMA)) and the multilayer of the derived copolymer assembling poly(diallyl dimethyl ammanium chloride) (PDDA). The self-assembling process of the mulUlayer was monitored by UV-vis absorption spectroscopy, and the data indicated a linear increase in film thick-ness with a number of ws-P(PV-co-SMA)/PDDA bilayers. The alternative deposition of ws-P (PV-co-SMA) and PDDA allowed the insertion of a non-conjugated layer between the conjugated layers, thus the migration of the photogenerated polarons was effectively confined in the isolated ws-P (PV-co-SMA) chains. Consequently, the photoluminescence quantum yield reached 0.68, 30 times higher than that of pure poly(p-phenylen vinylene). The distinct electronic interactions between conjugated segments were confirmed by comparative analyses of the excitation spectra and time-resolved photolumines-cence spectra of ws-P(PV-co-SMA) solid film and the assembled multilayers. The confinement effect of the PDDA layer on the photogenerated carriers was verified by the surface photovoltage spectroscopic measurement on both ws-P(PV-co-SMA) solid film and self-assembled multilayers.

  12. Decolourisation of palm oil mill biogas plant wastewater using Poly-Diallyldimethyl Ammonium Chloride (polyDADMAC) and other chemical coagulants

    Science.gov (United States)

    Zahrim, A. Y.; Dexter, Z. D.

    2016-06-01

    Palm oil mill effluent was expected as a future source of renewable biogas. Nevertheless,colours in palm oil mill biogas plant wastewater (POMBPW) causes negative perception among the public and the wastewater is difficult to be treated biologically. In this study, the performance of various chemical coagulants i.e., calcium lactate, magnesium hydroxide, ferric chloride, aluminium chlorohydrate i.e. CK-800, CK-1000, and polyDADMAC, forPOMBPW colour removal were investigated. PolyDADMAC (1,000 mg/L) shows best colour removal (∼48%). The main coagulation process with polyDADMACcould be due to charge neutralization-bridging mechanism. The zeta potential analysis supports the finding where the value became positive as the dosage increases. The addition of polyDADMAC has increased the conductivity of the treated wastewater up to 9.22%; however, the final pH is maintained (8.0-8.3). It can be deduced that polyDADMAC has potential to treat POMBPW at low dosage.

  13. 蒸汽再压缩技术回收废水中氯化铵的工程实例%Engineering Example of Recovery Ammonium Chloride from Wastewater by MVR

    Institute of Scientific and Technical Information of China (English)

    弋万

    2016-01-01

    在化工农药产品生产中产生的高氨氮含量废水,具有生物毒性大,可生化性差等特点,属较难降解有机废水。本文利用机械式蒸汽再压缩技术处理某胺化反应产生的高氨氮废水,回收富含的氯化铵晶体,实现了废弃物资源化以及排放量最小化。此废水预处理装置运行结果分析表明,该技术属“源头治理”-“废弃物资源化”的废水治理模式,具有环境-经济双重效益。%High ammonia-n wastewater in the production of chemical pesticide products has characteristics of biological toxicity and poor biodegradability, was refractory organic wastewater. Mechanical Vapor Recompression technology was used to manage high ammonia-n wastewater in amination reaction production, and recycle rich contains ammonium chloride crystals and implemente minimizing wastes and emissions. The analysis of the wastewater pretreatment plant operation showed that the technology was a "source governance"-"waste resource recovery" mode of wastewater treatment, had environmental and economic co-benefits.

  14. 十二烷基二甲基苄基氯化铵对生物除磷的影响研究%EFFECT OF BENZYL DIMETHYL DODECYL AMMONIUM CHLORIDE ON BIOLOGICAL PHOSPHORUS REMOVAL

    Institute of Scientific and Technical Information of China (English)

    乔婧; 刘东方; 李克勋; 陶芸; 张国威; 孙洁

    2011-01-01

    利用静态研究了十二烷基二甲基苄基氯化铵(DDBAC)对生物除磷的影响,通过设置不同DDBAC含量及空白对照对好氧吸磷和厌氧释磷进行了分析.结果表明,厌氧初始COD在400mg·L-1左右时,随着DDBAC负荷的增加,系统释磷能力增强;随着DDBAC含量的增加,吸磷速率降低直至丧失了吸磷特性;DDBAC的存在对生物除磷系统带来了不利影响,使试验污泥的电导率增加,质量浓度40mg·L-1时能明显影响细胞膜的通透性.%Batch experiments were conducted to investigate the effect ofbenzyl dimethyl dodecyl ammonium chloride (DDBAC) on biological phosphorus removal. Different concentrations of DDBAC were acted on the tested sludge under anaerobic and aerobic phase respectively. Results showed that the presence of DDBAC promoted the release of phosphorus while inhibited the uptake of phosphorus. When initial COD was 400 mg·L-1, the increment of P under the aerobic condition acted by 40 mg·L-1 DDBAC which was three times as many as that in control; the phosphorus uptake rate under the aerobic phase decreased until the phenomenon of p-uptake disappeared when the DDBAC reached 10 mg·L-1. ThepresenceoftheQAC negatively affected the performance of biological phosphorus removal. The electrical conductivity of the tested sludge increased sharply with the addition of 40 mg·L-1 DDBAC, which elucidated that DDBAC had an obvious influence on membrane permeability.

  15. Crystal structure of the inclusion complex 25-benzo-ylmeth-oxy-5,11,17,23-tetra-tert-butyl-26,27,28-trihy-droxy-2,8,14,20-tetra-thia-calix[4]arene-tetra-ethyl-ammonium chloride (1/1).

    Science.gov (United States)

    Akkurt, Mehmet; Jasinski, Jerry P; Mohamed, Shaaban K; Omran, Omran A; Albayati, Mustafa R

    2015-11-01

    The asymmetric unit of the title compound, C48H54O5S4·N(C2H5)4 (+)·Cl(-), contains two tetra-tert-butyl-[(benzo-yl)meth-oxy]-trihy-droxy-tetra-thia-calix[4]arene mol-ecules, two tetra-ethyl-ammonium cations and two chloride anions. The two calixarene molecules in the asymmetric unit each display a cone conformation. There are no significant differences between the two independent molecules. The guest species do not sit within the calixarene 'buckets'. In the crystal, extensive O-H⋯O, O-H⋯S and O-H⋯Cl hydrogen bonds and weak C-H⋯O, C-H⋯S and C-H⋯Cl inter-actions link the thia-calixarene mol-ecules, tetra-ethyl-ammonium cations and chloride anions, forming a three-dimensional network encompassing channels running parallel to the a-axis direction. The structure contains a solvent-accessible void of 76 (3) Å(3), but no solvent mol-ecule could reasonably be located. The crystal studied was an inversion twin with a 0.57 (8):0.43 (8) domain ratio. PMID:26594550

  16. Effects of Temperature and Drying and Wetting Alternation on Ammonium Fixation in Manured Loessial Soil

    Institute of Scientific and Technical Information of China (English)

    FANXIAOLIN; LILING; 等

    1996-01-01

    Effects of temperature and drying and wetting alternation (DWA) on ammonium fixation in manured loessial soil were studied by means of Batch Equilibrium with varying concentration solutions of ammonium chloride.ammonium fixation time,and soil clay contents.The purpose of the research was to find out the pattern of ammonium fixation affected by the varying factors.The results showed a remarkable variation in ammonium fixation.Fixed ammonium increased with temperature and treatments of DWA.The ammonium fixation in manured loessial soil was characterized by the effect of temperature and DWA.

  17. Preparation and Characterization of Anhydrous Magnesium Chloride in Organic Solvent%有机溶剂法无水氯化镁的制备与表征

    Institute of Scientific and Technical Information of China (English)

    周宁波; 陈白珍; 何新快; 李义兵

    2005-01-01

    Ammonium carnallite was synthesized by hydrated magnesium chloride in salt lake and ammonium chloride solution. Dehydrated ammonium carnallite was dissolved in methanol under low temperature by feeding ammonia, to prepare anhydrous magnesium chloride. The results show that anhydrous magnesium chloride contains magnesium oxide in an amount less than 0.1% by weight, the yield of magnesium chloride was above 99.5%. Ammonium carnallite, ammoniation magnesium chloride and anhydrous magnesium chloride were characterized by thermoanalysis, X-ray powder diffraction and scanning electron microscopy.

  18. Calibration and measurement uncertainties of a continuous-flow cloud condensation nuclei counter (DMT-CCNC: CCN activation of ammonium sulfate and sodium chloride aerosol particles in theory and experiment

    Directory of Open Access Journals (Sweden)

    D. Rose

    2007-06-01

    Full Text Available Experimental and theoretical uncertainties in the measurement of cloud condensation nuclei (CCN with a continuous-flow thermal-gradient CCN counter from Droplet Measurement Technologies (DMT-CCNC have been assessed by model calculations and calibration experiments with ammonium sulfate and sodium chloride aerosol particles in the diameter range of 20–220 nm. Experiments have been performed in the laboratory and during field measurement campaigns, extending over a period of more than one year and covering a wide range of operating conditions (650–1020 hPa ambient pressure, 0.5–1.0 L min−1 aerosol flow rate, 20–30°C inlet temperature, 4–34 K m−1 temperature gradient. For each set of conditions, the effective water vapor supersaturation (Seff in the CCNC was determined from the measured CCN activation spectra and Köhler model calculations.

    High measurement precision was achieved under stable laboratory conditions, where relative variations of Seff in the CCNC were generally less than ±2%. During field measurements, however, the relative variability increased up to ±5–7%, which can be mostly attributed to variations of the CCNC column top temperature with ambient temperature.

    To assess the accuracy of the Köhler models used to calculate Seff, we have performed a comprehensive comparison and uncertainty analysis of the various Köhler models and thermodynamic parameterizations commonly used in CCN studies. For the relevant supersaturation range (0.05–2%, the relative deviations between different modeling approaches were as high as 25% for (NH42SO4 and 16% for NaCl. The deviations were mostly caused by the different parameterizations for the activity of water in aqueous solutions of (NH42SO4 and NaCl (activity parameterization, osmotic coefficient, and van't Hoff

  19. Crystal structure of the inclusion complex 25-benzo­ylmeth­oxy-5,11,17,23-tetra-tert-butyl-26,27,28-trihy­droxy-2,8,14,20-tetra­thia­calix[4]arene–tetra­ethyl­ammonium chloride (1/1)

    OpenAIRE

    Akkurt, Mehmet; Jerry P. Jasinski; Shaaban K. Mohamed; Omran, Omran A.; Mustafa R. Albayati

    2015-01-01

    The asymmetric unit of the title compound, C48H54O5S4·N(C2H5)4 +·Cl−, contains two tetra-tert-butyl-[(benzo­yl)meth­oxy]-trihy­droxy-tetra­thia­calix[4]arene mol­ecules, two tetra­ethyl­ammonium cations and two chloride anions. The two calixarene molecules in the asymmetric unit each display a cone conformation. There are no significant differences between the two independent molecules. The guest species do not sit within the calixarene ‘buckets’. In the crystal, extensive O—H⋯O, O—H⋯S and O—...

  20. The Study on Detection of Chloride Ion in Flue Gas Ammonium Sulfate Slurry by Automatic Potentiometric Titration Method%自动电位滴定法测定烟气氨法脱硫模拟浆液中氯离子的研究

    Institute of Scientific and Technical Information of China (English)

    杭蕾; 吕程; 陈慧慧; 连洲洋; 袁礼锐; 魏无际

    2015-01-01

    Chloride ion content of ammonia desulfurization process is an important monitoring indicators and this paper dis-cusses the detection of chloride ions in ammonium sulfate slurry by automatic potentiometric titration .The results show that :adding ethanol helps to increase the magnitude of the potential jump ;when pH=3-5 ,the result is accurate ;the recovery rate keeps between 90% and 110% ;compared with the Mohr method ,the test result is more accurate and precise and free from ash color;also the tested result is close to ion chromatography detection result ,but the high concentrations of chloride ion potentiometric titration is more advantageous .%氯离子含量是氨法脱硫工艺中的一个重要监控指标,用自动电位滴定法测定氨法脱硫浆液中的氯离子。结果表明,实验加入乙醇有利于增大电位突跃幅度;pH值为3~5时实验结果准确;加标回收率为90%~110%;与莫尔法相比,测定结果准确度、精密度更高,且不受灰分颜色干扰;与离子色谱法测定结果准确度、精密度相近,但测定高浓度氯离子电位滴定法更有优势。

  1. Aluminum chloride restoration of in-situ leached uranium ores

    Energy Technology Data Exchange (ETDEWEB)

    Grant, D.C.; Burgman, H.A.

    1984-01-01

    During in-situ uranium mining using ammonium bicarbonate lixiviant, the ammonium exchanges with cations on the ore's clay. After mining is complete, the ammonium may desorb into post-leach ground water. For the particular ore studied, other elements (uranium and selenium) that are mobilized during the leaching process, have also been found in post-leach ground water. Laboratory column tests, used to simulate the leaching process, have shown that aluminum chloride can rapidly remove ammonium from the ore and, thus, greatly reduce the subsequent ammonium leakage level into ground water. The aluminum chloride has also been found to reduce the leakage levels of uranium and selenium. In addition, the aluminum chloride treatment produces a rapid increase in permeability.

  2. Aluminum chloride restoration of in situ leached uranium ores

    International Nuclear Information System (INIS)

    During in situ uranium mining using ammonium bicarbonate lixiviant, the ammonium exchanges with cations on the ore's clay. After mining is complete, the ammonium may desorb into post-leach ground water. For the particular ore studied, other chemicals (i.e., uranium and selenium) which are mobilized during the leach process, have also been found in the post-leach ground water. Laboratory column tests, used to simulate the leaching process, have shown that aluminum chloride can rapidly remove ammonium from the ore and thus greatly reduce the subsequent ammonium leakage level into ground water. The aluminum chloride has also been found to reduce the leakage levels of uranium and selenium. In addition, the aluminum chloride treatment produces a rapid improvement in permeability

  3. Aluminum chloride restoration of in situ leached uranium ores

    Energy Technology Data Exchange (ETDEWEB)

    Grant, D.C.; Burgman, M.A.

    1982-09-01

    During in situ uranium mining using ammonium bicarbonate lixiviant, the ammonium exchanges with cations on the ore's clay. After mining is complete, the ammonium may desorb into post-leach ground water. For the particular ore studied, other chemicals (i.e., uranium and selenium) which are mobilized during the leach process, have also been found in the post-leach ground water. Laboratory column tests, used to simulate the leaching process, have shown that aluminum chloride can rapidly remove ammonium from the ore and thus greatly reduce the subsequent ammonium leakage level into ground water. The aluminum chloride has also been found to reduce the leakage levels of uranium and selenium. In addition, the aluminum chloride treatment produces a rapid improvement in permeability.

  4. Efeito do dimetildioctadecilamônio na resposta imune humoral e celular de cobaios inoculados com o herpesvírus bovino-1 inativado Effect of dimethyl dioctadecyl ammonium chloride on the humoral and cellular response to inactivated bovine herpesvirus-1 in guinea pigs

    Directory of Open Access Journals (Sweden)

    L.C. Silva

    2004-06-01

    Full Text Available Avaliou-se o potencial adjuvante do cloreto de dimetildioctadecilamônio (DDA cloreto em estimular as respostas imune humoral e celular, do tipo hipersensibilidade cutânea tardia (DTH, em cobaios que receberam preparações de antígeno contendo o herpesvírus bovino tipo 1 (BHV-1 inativado. Os animais foram vacinados com o BHV-1 em cinco diferentes formulações, representadas pelos grupos: A- adjuvante completo / incompleto de Freund, B- hidróxido de alumínio (Al(OH3, C- DDA cloreto, D- associação Al(OH3 / DDA cloreto e E- BHV-1 em solução aquosa sem adjuvante. Os animais do grupo F, grupo-controle negativo, foram inoculados apenas com meio de cultivo celular. Os maiores títulos de anticorpos neutralizantes do BHV-1, expressos em log2, foram obtidos nos grupos D, A e C, com títulos de 6,25, 6,0 e 5,25, respectivamente. Na avaliação da DTH, os maiores aumentos na espessura da dobra da pele foram observados nos grupos A (2,4mm, C (1,8mm e D (1,1mm. O DDA cloreto, utilizado tanto de forma isolada quanto em associação, determinou a potencialização das respostas imunológicas humoral e celular de cobaios imunizados com o BHV-1 inativado.The adjuvanticity of dimethyl dioctadecyl ammonium chloride (DDA chloride to induce humoral and cell mediated (delayed type hypersensitivity - DTH - immune responses was assessed in guinea pigs that received antigen preparations containing inactivated bovine herpesvirus type 1 (BHV-1. The animals were vaccinated with five different formulations, containing BHV-1 represented by groups: A- complete/incomplete Freund adjuvant, B- aluminum hydroxide (Al(OH3, C- DDA chloride, D- association Al(OH3/DDA and E- BHV-1 in aqueous solution without adjuvant. Group F was the negative control group and the animals received only cell culture medium. The higher titers of BHV-1 neutralizing antibodies, expressed in log2, were obtained in groups D, A and C with values of 6.25, 6.0 and 5.25, respectively. In the DTH

  5. Manufacture and research of acrylamide-methyl acryloyl oxygen ethyl trimethyl ammonium chloride copolymer%丙烯酰胺-甲基丙烯酰氧乙基三甲基氯化铵共聚物的制备研究

    Institute of Scientific and Technical Information of China (English)

    钱涛; 李梦耀; 马岚; 王莹; 张晓松

    2014-01-01

    Using ammonium persulfate( KPS )trigger with methacryloyl ethyl trimethyl ammonium chlo-ride( DMC)and acrylamide( AM)in a single aqueous phase to prepare a cationic polyacrylamide lactic flocculent(CPAM)and used in the wastewater. Discussing about total monomer,initiator dosage,pH,reaction time and other factors affect the intrinsic viscosity and viscosity-average molecular weight of polymer. The results show that P( DMC-AM)viscosity-average molecular weight can be up to 1. 72 × 107 g/mol, the effluent turbidity removal rate reached more than 80%,the product is a kind of flocculant of excel-lent performance.%用过硫酸铵( KPS)引发甲基丙烯酰氧乙基三甲基氯化铵( DMC)与丙烯酰胺( AM)单水相共聚,制备了阳离子聚丙烯酰胺类絮凝剂P( DMC-AM),并应用于废水。探讨了单体总量、引发剂用量、pH值、反应时间等因素对聚合物的特性粘数和粘均分子量的影响。结果表明,P(DMC-AM)粘均分子量可达1.72×107 g/mol,对废水浊度的去除率达到80%以上,是一种性能优良的絮凝剂。

  6. 15N-ammonium test in clinical research

    International Nuclear Information System (INIS)

    By use of the 15N-ammonium test the liver function is investigated under influence of hormonal contraceptives in women and in liver diseases in children. With the described noninvasive nonradioactive isotope test the ammonia detoxification capability and the urea synthesis capacity of the liver is determined by measuring of the 15N excretion in ammonia and urea in urine after oral administering of 15N-ammonium chloride. The 15N-ammonium test shows a significant influence of the hormonal contraceptives on the liver function and gives diagnostic evidence for liver diseases in children. (author)

  7. Elevated ammonium levels

    DEFF Research Database (Denmark)

    Søgaard, Rikke; Novak, Ivana; MacAulay, Nanna

    2012-01-01

    Increased ammonium (NH(4)(+)/NH(3)) in the brain is a significant factor in the pathophysiology of hepatic encephalopathy, which involves altered glutamatergic neurotransmission. In glial cell cultures and brain slices, glutamate uptake either decreases or increases following acute ammonium expos...

  8. Influence of Ammonium Salts and Cane Molasses on Growth of Alcaligenes eutrophus and Production of Polyhydroxybutyrate

    OpenAIRE

    Beaulieu, M.; Beaulieu, Y.; Melinard, J.; Pandian, S.; GOULET, J.

    1995-01-01

    The production of polyhydroxybutyrate (PHB) by Alcaligenes eutrophus DSM 545 was studied in a synthetic medium with 3% glucose at pH 7.0 supplemented with several ammonium substrates and cane molasses. Growth was measured by dry cell weight, and the PHB content was measured by gas chromatography. The effects of ammonium sources such as sulfate, nitrate, phosphate, and chloride salts and those of different ammonium sulfate concentrations were evaluated. The best growth and PHB production were ...

  9. Adamantane-1-ammonium acetate

    Directory of Open Access Journals (Sweden)

    Elise J. C. de Vries

    2011-06-01

    Full Text Available In the title compound, C10H18N+·C2H3O2−, the ammonium H atoms of the cation are linked to three acetate anions via N—H...O hydrogen bonds, forming a chain structure extending along the b axis.

  10. Ammonium inhibition of nitrogenase activity in Herbaspirillum seropedicae

    Energy Technology Data Exchange (ETDEWEB)

    Fu, H.; Burris, R.H. (Univ. of Wisconsin, Madison (USA))

    1989-06-01

    The effect of oxygen, ammonium ion, and amino acids on nitrogenase activity in the root-associated N{sub 2}-fixing bacterium Herbaspirillum seropedicae was investigated in comparison with Azospirillum spp. and Rhodospirillum rubrum. H. seropedicae is microaerophilic, and its optimal dissolved oxygen level is from 0.04 to 0.2 kPa for dinitrogen fixation but higher when it is supplied with fixed nitrogen. No nitrogenase activity was detected when the dissolved O{sub 2} level corresponded to 4.0 kPa. Ammonium, a product of the nitrogenase reaction, reversible inhibited nitrogenase activity when added to derepressed cell cultures. However, the inhibition of nitrogenase activity was only partial even with concentrations of ammonium chloride as high as 20 mM. Amides such as glutamine and asparagine partially inhibited nitrogenase activity, but glutamate did not. Nitrogenase in crude extracts prepared from ammonium-inhibited cells showed activity as high as in extracts from N{sub 2}-fixing cells. The pattern of the dinitrogenase and the dinitrogenase reductase revealed by the immunoblotting technique did not change upon ammonium chloride treatment of cells in vivo. No homologous sequences were detected with the draT-draG probe from Azospirillum lipoferum. There is no clear evidence that ADP-ribosylation of the dinitrogenase reductase is involved in the ammonium inhibition of H. seropedicae. The uncoupler carbonyl cyanide m-chlorophenylhydrazone decreased the intracellular ATP concentration and inhibited the nitrogenase activity of whole cells. The ATP pool was significantly disturbed when cultures were treated with ammonium in vivo.

  11. Studies on inorganic exchangers - ammonium phosphomolybdate (AMP) and ammonium phosphotungstate (APW)

    International Nuclear Information System (INIS)

    Separation of fission product cesium from other accompanying fission products by use of inorganic ion exchangers, namely, ammonium phosphomolybdate (AMP) and ammonium phosphotungstate (APW) has been investigated. The gross fission product solution is passed through a column of AMP or APW conditioned with HNO3 of appropriate molarity say 2M. The column is thoroughly washed with HNO3 till no activity is left in it . Cesium is eluted by 3M NH4NO3 at 40 deg C. The eluate is converted into cesium chloride by wet decomposition method. The radioactive cesium obtained by this procedure is found to be of high purity and free from any other active contaminants. (M.G.B.)

  12. Synthesis, characterization, and bioactivity of rosin quaternary ammonium salt derivatives

    Directory of Open Access Journals (Sweden)

    Tao Liang

    2013-02-01

    Full Text Available Two series of rosin quaternary ammonium salts (QAS were synthesized using the same path. The structure of the target products was characterized by HPLC, MS, IR, and 1HNMR, and the bioactivity was determined by filter paper method using Trametes versicolor (white-rot fungus and Gloeophyllum trabeum (brown-rot fungus, which are two kinds of general wood decay fungi in nature. The results showed that all compounds tested had a satisfactory anti-fungal effect at the molarity of 0.025 mmol/mL. Hereinto, acrylpimaric Gemini QAS had better bioactivity than dehydrogenated or tetrahydrogenated rosin QAS against Trametes versicolor. To this fungus, quaternary ammonium groups, which wraps up the membrane of microorganism and disrupts the balance in cell membrane, plays the leading role for its bioactivity. To Gloeophyllum trabeum, the inhibition activity of acrylpimaric QAS and dehydrogenated rosin QAS are almost at the same level and larger than tetrahydrogenated rosin QAS, so we conclude that both quaternary ammonium group and aromatic group play important roles. Compared with dodecyl dimethyl benzyl ammonium chloride (1227, which is a commercially available quaternary ammonium salt type fungicide, acrylpimaric acid quaternary ammonium salts have approximate bioactivity against Gloeophyllum trabeum. In conclusion, rosin derivatives with functional groups would do well in wood preservative applications.

  13. Removal of ammonium from municipal landfill leachate using natural zeolites.

    Science.gov (United States)

    Ye, Zhihong; Wang, Jiawen; Sun, Lingyu; Zhang, Daobin; Zhang, Hui

    2015-01-01

    Ammonium ion-exchange performance of the natural zeolite was investigated in both batch and column studies. The effects of zeolite dosage, contact time, stirring speed and pH on ammonium removal were investigated in batch experiments. The result showed that ammonium removal efficiency increased with an increase in zeolite dosage from 25 to 150 g/L, and an increase in stirring speed from 200 to 250 r/min. But further increase in zeolite dosage and stirring speed would result in an unpronounced increase of ammonium removal. The optimal pH for the removal of ammonium was found as 7.1. In the column studies, the effect of flow rate was investigated, and the total ammonium removal percentage during 180 min operation time decreased with the flow rate though the ion-exchange capacity varied to a very small extent with the flow rate ranging from 4 to 9 mL/min. The spent zeolite was regenerated by sodium chloride solution and the ammonia removal capacity of zeolite changed little or even increased after three regeneration cycles. PMID:26510611

  14. Extração simultânea de alumínio, cálcio, magnésio, potássio e sódio do solo com solução de cloreto de amônio Simultaneous extraction of aluminum, calcium, magnesium, potassium, and sodium with ammonium chloride solution

    Directory of Open Access Journals (Sweden)

    R. C. Boeira

    2004-10-01

    samples used were from Northeastern Brazil fruit growing region and from the Embrapa Environment Experimental Station, located in Jaguariúna County, São Paulo State. The employed methods were: (a simultaneous extraction of the five cations with a 1 mol L-1 NH4Cl; (b extraction of Ca, Mg, and Al with 1 mol L-1 KCl; and (c extraction of K and Na with the Mehlich-1 solution. The NH4Cl solution has a higher Mg extraction capacity than KCl, but they present similar Ca and Al extraction ability. The NH4Cl solution extracted more K and Na than the Mehlich-1 solution. It is concluded that the ammonium chloride solution is a convenient alternative for the extraction of exchangeable Al, Ca, Mg, K, and Na from soils.

  15. Uranium concentrate obtained from sulfuric liquor by solvent extraction using ammonium sulfate as extractant agent

    International Nuclear Information System (INIS)

    Results of uranium concentrate obtainment from sulfuric liquor by solvent extraction followed by chemical precipitation techniques are presented. In the extraction process a tertiary amine as extractant agent and ammonium sulfate solution as stripping agent were used. Uranium was precipitated from the pregnant strip solution as ammonium diuranate by addition of ammonium hydroxide solution. Equilibrium pH and chloride content in the loaded solvent were the main interference on the uranium stripping stage. From a chloride-free uranium loaded organic phase a pregnant strip solution containing 33.2 g/L U3O8 and a stripped solvent with 0.006 g/L U3O8 using 5 stages of mixer-settlers were obtained. The chemical precipitation stage yielded a high purity ammonium diuranate precipitate with a recovery of 99.98%. After calcination, the product presented 99.7 % U3O8 content. (author)

  16. Density Functional Theory Study on Conformers of Benzoylcholine Chloride

    OpenAIRE

    Mustafa Karakaya; Fatih Ucun; Ahmet Tokatlı

    2013-01-01

    The optimized molecular structures and vibrational frequencies and also gauge including atomic orbital (GIAO) 1H and 13C NMR shift values of benzoylcholine chloride [(2-benzoyloxyethyl) trimethyl ammonium chloride] have been calculated using density functional theory (B3LYP) method with 6-31++G(d) basis set. The comparison of the experimental and calculated infrared (IR), Raman, and nuclear magnetic resonance (NMR) spectra has indicated that the experimental spectra are formed from the superp...

  17. Ammonium diphosphitoindate(III

    Directory of Open Access Journals (Sweden)

    Farida Hamchaoui

    2013-04-01

    Full Text Available The crystal structure of the title compound, NH4[In(HPO32], is built up from InIII cations (site symmetry 3m. adopting an octahedral environment and two different phosphite anions (each with site symmetry 3m. exhibiting a triangular–pyramidal geometry. Each InO6 octahedron shares its six apices with hydrogen phosphite groups. Reciprocally, each HPO3 group shares all its O atoms with three different metal cations, leading to [In(HPO32]− layers which propagate in the ab plane. The ammonium cation likewise has site symmetry 3m.. In the structure, the cations are located between the [In(HPO32]− layers of the host framework. The sheets are held together by hydrogen bonds formed between the NH4+ cations and the O atoms of the framework.

  18. Ammonium generation during SRAT cycle

    International Nuclear Information System (INIS)

    During the IDMS noble-metal demonstration runs ammonium nitrate deposition was found in the vessel vent system of the feed preparation area. In the bench-scale experiments of studying the hydrogen generation during the sludge treatment cycle, ammonium ion production was also monitored. It was found that: During a simulation of the DWPF Cold Chemical Runs SRAT cycle no detectable amount of ammonium ions was generated when treating a non-noble-metal containing sludge simulant according to the nitric acid flowsheet. Ammonium ions were generated during the SRAT-SME cycle when treating the noble-metal containing sludge with either formic acid or nitric acid/late-washing PHA. This is due to the reaction between formic acid and nitrate catalyzed by the noble metals in the sludge simulant. Ammonium ion production closely followed the hydrogen evolution from the catalytic decomposition of formic acid. This report summarizes the results of the production of ammonia during the SRAT cycle

  19. Waterproofing Materials for Ammonium Nitrate

    Directory of Open Access Journals (Sweden)

    R.S. Damse

    2004-10-01

    Full Text Available This study explores the possibility of overcoming the problem of hygroscopicity of ammonium nitrate by coating the particles with selected waterproofing materials. Gravimetric analysis ofthe samples of ammonium nitrate coated with eight different waterproofing materials, vis-a-vis, uncoated ammonium nitrate, were conducted at different relative humidity and exposuretime. The results indicate that mineral jelly is the promising waterproofing material for ammonium nitrate among the materials tested, viz, calcium stearate, dioctyl phthalate, kaoline, diethylphthalate, dinitrotoluene, shelac varnish, and beeswax. Attempts were made to confirm the waterproofing ability of mineral jelly to ammonium nitrate using differential thermal analysisand x-ray diffraction patterns as an experimental tool. Suitability of mineral jelly as an additive for the gun propellant was also assessed on the basis of theoretical calculations using THERMprogram.

  20. 75 FR 40729 - Residues of Quaternary Ammonium Compounds, N-Alkyl (C12-14

    Science.gov (United States)

    2010-07-14

    ...) 305-5805. II. Summary of Petitioned-For Exemption In the Federal Register of November 28, 2007 (72 FR... 12-18 ) dimethyl benzyl ammonium chloride. (73 FR 49101) (August 20, 2008). The commenter mistakenly... Regulatory Planning and Review (58 FR 51735, October 4, 1993). Because this final rule has been exempted...

  1. Assessment by X-ray diffraction the process of bentonite organophilization using a different quaternary ammonium salts

    International Nuclear Information System (INIS)

    The process was conducted in an organophilization Bentonite originated from the Company of Industrial Minerals of Mozambique Ltd. (Mimoc). The transformation of bentonite organophilic clay were performed in laboratory procedures that aim to mechanochemical exchange of Na+ and Ca2+ from the interlayer space of clay minerals by cations of quaternary ammonium salts. In this study we used two types of salts, which are: the cetyl trimethyl ammonium chloride and alkyl dimethyl benzyl ammonium chloride at different concentrations (30, 50, 80, 100 meq/100 g clay). The natural bentonite and organophilic clay samples were characterized by X-ray diffraction (XRD) to obtain the mineralogical constituents and analysis phases of the increase in interlayer distance confirming the incorporation of quaternary ammonium salts in the structure of clays. (author)

  2. Treatment of ammonium-rich swine waste in modified porphyritic andesite fixed-bed anaerobic bioreactor.

    Science.gov (United States)

    Wang, Qinghong; Yang, Yingnan; Li, Dawei; Feng, Chuanping; Zhang, Zhenya

    2012-05-01

    In this study, a modified porphyritic andesite (WRS) was developed as ammonium adsorbent and bed material for the anaerobic digestion of ammonium-rich swine waste. The performance in bioreactors with modified WRS, natural WRS, calcium chloride and no additives was investigated. The bioreactor with modified WRS exhibited the best performance, with start-up time on the 7th day, methane yield of 359.71 ml/g-VS, and COD removal of 67.99% during all 44 days of the experiment at 35°C. The effective ammonium adsorption and essential ions dissociation for microorganisms by modified WRS, as well as the immobilization of microbial on the surface of the modified WRS play a great role on the high efficiency anaerobic digestion of ammonium-rich swine waste. PMID:22366608

  3. Comparative DFT study of crystalline ammonium perchlorate and ammonium dinitramide.

    Science.gov (United States)

    Zhu, Weihua; Wei, Tao; Zhu, Wei; Xiao, Heming

    2008-05-22

    The electronic structure, vibrational properties, absorption spectra, and thermodynamic properties of crystalline ammonium perchlorate (AP) and ammonium dinitramide (ADN) have been comparatively studied using density functional theory in the local density approximation. The results shows that the p states for the two solids play a very important role in their chemical reaction. From the low frequency to high frequency region, ADN has more motion modes for the vibrational frequencies than AP. The absorption spectra of AP and ADN display a few, strong bands in the fundamental absorption region. The thermodynamic properties show that ADN is easier to decompose than AP as the temperature increases. PMID:18396853

  4. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    Prediction of chloride ingress into concrete is an important part of durability design of reinforced concrete structures exposed to chloride containing environment. This paper presents the state-of-the art: an analytical model which describes chloride profiles in concrete as function of depth and...... makes physical sense for the design engineer, i.e. the achieved chloride diffusion coefficients at 1 year and 100 years, D1 and D100 respectively, and the corresponding achieved chloride concentrations at the exposed concrete surface, C1 and C100. Data from field exposure supports the assumption of time...... dependent surface chloride concentrations and the diffusion coefficients. Model parameters for Portland cement concretes with and without silica fume and fly ash in marine atmospheric and submerged South Scandinavian environment are suggested in a companion paper based on 10 years field exposure data....

  5. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    Prediction of chloride ingress into concrete is an important part of durability design of reinforced concrete structures exposed to chloride containing environment. This paper presents experimentally based design parameters for Portland cement concretes with and without silica fume and fly ash in...... marine atmospheric and submersed South Scandinavian environment. The design parameters are based on sequential measurements of 86 chloride profiles taken over ten years from 13 different types of concrete. The design parameters provide the input for an analytical model for chloride profiles as function...

  6. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    2008-01-01

    Prediction of chloride ingress into concrete is an important part of durability design of reinforced concrete structures exposed to chloride containing environment. This paper presents experimentally based design parameters for Portland cement concretes with and without silica fume and fly ash in...

  7. 21 CFR 582.1141 - Ammonium phosphate.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Ammonium phosphate. 582.1141 Section 582.1141 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Additives § 582.1141 Ammonium phosphate. (a) Product. Ammonium phosphate (mono- and dibasic). (b)...

  8. 77 FR 50613 - Didecyl Dimethyl Ammonium Carbonate and Didecyl Dimethyl Ammonium Bicarbonate; Exemption From the...

    Science.gov (United States)

    2012-08-22

    ... AGENCY 40 CFR Part 180 Didecyl Dimethyl Ammonium Carbonate and Didecyl Dimethyl Ammonium Bicarbonate... Didecyl Dimethyl Ammonium Carbonate and Didecyl Dimethyl Ammonium Bicarbonate, jointly referred to as.... Background and Statutory Findings In the Federal Register of December 8, 2011 (76 FR 76674) (FRL-...

  9. Cloreto de n-(2-hidroxil propil-3-trimetil amônio quitosana como adsorvente de corantes reativos em solução aquosa Chitosan-n-2-hydroxypropyl trimethyl ammonium chloride as adsorbent for the removal of the reactive dye from aqueous solutions

    Directory of Open Access Journals (Sweden)

    Valfredo T. Fávere

    2010-01-01

    Full Text Available The quaternary chitosan was synthesized by reaction of chitosan with glycidyl trimethylammonium chloride. it was characterized by infrared spectra and conductometric titration. Adsorption of reactive blue 4 (RB4 and reactive red 120 (RR120 by quaternary chitosan was studied from aqueous medium. Two kinetic adsorption models were tested: pseudo first-order and pseudo second-order. The experimental data best fitted the pseudo second-order model. The Langmuir isotherm model provided the best fit to the equilibrium data in the concentration range investigated and the maximum adsorption capacity determined was 415 mg (RR120 and 637 mg (RB4 of reactive dye per gram of adsorbent.

  10. Ammonium assmilation in spruce ectomycorrhizas

    International Nuclear Information System (INIS)

    Assimilation of labelled NH4+ into amino acids has been followed in ectomycorrhizal roots of spruce. Over an 18 h period of NH4+ feeding, Gln, Glu and Ala became the most abundant amino acids. Gln was also the most highly labelled amino acid during the experiment, followed by Glu and Ala. This result indicates that Gln synthesis is an important ammonium utilization reaction in spruce mycorrhizas. Addition of MSX to NH4+ fed mycorrhizas caused an inhibition of Gln accumulation with a corresponding increase in Glu, Ala and Asn levels. The supply of MSX induced a sharp diminution of 15N enrichment in both amino and amido groups of glutamine. In contrast, the 15N incorporation into Glu and derivatives (Ala and Asp) remained very high. This study demonstrates that the fungal glutamate dehydrogenase is quite operative in spruce ectomycorrhizas since it is able to sustain ammonium assimilation when glutamine synthetase is inhibited

  11. Phase diagram of ammonium nitrate

    International Nuclear Information System (INIS)

    Ammonium Nitrate (AN) has often subjected to uses in improvised explosive devices, due to its wide availability as a fertilizer and its capability of becoming explosive with slight additions of organic and inorganic compounds. Yet, the origin of enhanced energetic properties of impure AN (or AN mixtures) is neither chemically unique nor well understood -resulting in rather catastrophic disasters in the past1 and thereby a significant burden on safety in using ammonium nitrates even today. To remedy this situation, we have carried out an extensive study to investigate the phase stability of AN at high pressure and temperature, using diamond anvil cells and micro-Raman spectroscopy. The present results confirm the recently proposed phase IV-to-IV' transition above 17 GPa2 and provide new constraints for the melting and phase diagram of AN to 40 GPa and 400 °C.

  12. Proton- and ammonium- sensing by histaminergic neurons controlling wakefulness.

    Directory of Open Access Journals (Sweden)

    Yvgenij eYanovsky

    2012-04-01

    Full Text Available Orexinergic and histaminergic neurons in the posterior hypothalamus are involved in the control of arousal. Extracellular levels of acid /CO2 are fundamental physicochemical signals controlling wakefulness and breathing. Acidification excites orexinergic neurons like the chemosensory neurons in the brain stem. Hypercapnia induces c-Fos expression, a marker for increased neuronal activity, in the rat histaminergic tuberomamillary nucleus (TMN, but the mechanisms of this excitation are unknown. Acid-sensing ion channels (ASICs are gated by protons and also by ammonium. Recordings in rat brain slices revealed now that acidification within the physiological range (pH from 7.3 to 7.0 as well as ammonium chloride (5mM excite histaminergic neurons. We detected variable combinations of 4 known types of ASICs in single TMN neurons, along with the pharmacological properties of pH-induced current. At pH 7.0 however, activation of ASICs in TMN neurons was negligible. Block of type I metabotropic glutamate receptors abolished proton- but not ammonium- induced excitation. Mouse TMN neurons were identified within a novel HDC-Cre transgenic reporter mouse line. In contrast to the rat these lacked pH 7.0-induced excitation and showed only a minimal response to the mGluR I agonist DHPG (0.5µM. Ammonium-induced excitation was similar in mouse and rat. Thus glutamate, which is released by glial cells and orexinergic axons amplifies CO2/acid-induced arousal through the recruitment of the histaminergic system in rat but not in mouse. These results are relevant for the understanding of neuronal mechanisms controlling H+/CO2-induced arousal in hepatic encephalopathy and obstructive sleep apnoea. The new HDC-Cre mouse model will be a useful tool for studying the physiological and pathophysiological roles of the histaminergic system.

  13. Chloride ingress prediction

    DEFF Research Database (Denmark)

    Frederiksen, Jens Mejer; Geiker, Mette Rica

    2008-01-01

    makes physical sense for the design engineer, i.e. the achieved chloride diffusion coefficients at 1 year and 100 years, D1 and D100 respectively, and the corresponding achieved chloride concentrations at the exposed concrete surface, C1 and C100. Data from field exposure supports the assumption of time...... dependent surface chloride concentrations and the diffusion coefficients. Model parameters for Portland cement concretes with and without silica fume and fly ash in marine atmospheric and submerged South Scandinavian environment are suggested in a companion paper based on 10 years field exposure data....

  14. Tailored Architectures of Ammonium Ionenes

    OpenAIRE

    Tamami, Mana

    2009-01-01

    The synthesis and characterization of a variety of ammonium ionenes from water-soluble coatings to high-performance elastomers are discussed. Water-soluble random copolymer ionenes were synthesized using the Menshutkin reaction from 1,12-dibromododecane, N,N,Nâ ²,Nâ ²-tetramethyl-1,6-hexanediamine, and 1,12-bis(N,N-dimethylamino)dodecane. The absolute molecular weights were determined for the first time using a multiangle laser light scattering detector in aqueous size exclusion chromatograph...

  15. Ammonium assmilation in spruce ectomycorrhizas

    Energy Technology Data Exchange (ETDEWEB)

    Chalot, M.; Brun, A.; Botton, B. (Univ. of nancy, Vandoeuvre-les-Nancy (France)); Stewart, G. (University College, London (England))

    1990-05-01

    Assimilation of labelled NH{sub 4}{sup +} into amino acids has been followed in ectomycorrhizal roots of spruce. Over an 18 h period of NH{sub 4}{sup +} feeding, Gln, Glu and Ala became the most abundant amino acids. Gln was also the most highly labelled amino acid during the experiment, followed by Glu and Ala. This result indicates that Gln synthesis is an important ammonium utilization reaction in spruce mycorrhizas. Addition of MSX to NH{sub 4}{sup +} fed mycorrhizas caused an inhibition of Gln accumulation with a corresponding increase in Glu, Ala and Asn levels. The supply of MSX induced a sharp diminution of {sup 15}N enrichment in both amino and amido groups of glutamine. In contrast, the {sup 15}N incorporation into Glu and derivatives (Ala and Asp) remained very high. This study demonstrates that the fungal glutamate dehydrogenase is quite operative in spruce ectomycorrhizas since it is able to sustain ammonium assimilation when glutamine synthetase is inhibited.

  16. Synthesis of Chitosan Quaternary Ammonium Salts

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A series of N-alkyl or N-aryl chitosan quaternary ammonium salts were prepared via Schiffs base intermediates. Quaternization of N-substituted chitosan derivatives was carried out using methyl iodide to produce water-soluble cationic chitosan quaternary ammonium salt. The products were characterized by IR, 1HNMR and elemental analysis. The degree of substitution of chitosan quaternary ammonium salt was calculated by elemental analysis.

  17. Effect of ammonium sulfate, ammonium chloride and root-zone acidity on inorganic ion content of tobacco

    Science.gov (United States)

    Vessey, J. K.; Raper, C. D. Jr; Henry, L. T.; Raper CD, J. r. (Principal Investigator)

    1990-01-01

    Tobacco plants (Nicotiana tabacum L. cv NC82) were supplied with (NH4)2SO4 or NH4Cl at root-zone pH of 6.0 and 4.5 in hydroponic culture for 28 days. Dry matter accumulation, total N and C content, and leaf area and number were not affected by the NH4+ source or root-zone pH. Plants supplied with NH4Cl accumulated up to 1.2 mM Cl g DW-1, but accumulated 37% less inorganic H2PO4- and 47% less SO4(2-) than plants supplied with (NH4)2SO4. The large Cl- accumulation resulted in NH4Cl- supplied plants having a 31% higher inorganic anion (NO3-, H2, PO4-, SO4(2-), and Cl-) charge. This higher inorganic anion charge in the NH4Cl-supplied plants was balanced by a similar increase in K+ charge. Plants supplied with NH4Cl accumulated greater concentrations of Cl- in leaves (up to 5.1% of DW) than plants supplied with (NH4)2SO4 (less than -% DW). Despite the high Cl- concentration of leaves in NH4Cl supplied plants, these plants showed no symptoms of Cl- toxicity. This demonstrates that toxicity symptoms are not due solely to an interaction between high Cl- concentration in tissue and NH4+ nutrition. The increase in root-zone acidity to pH 4.5 from 6.0 did not induce toxicity symptoms.

  18. Mass transport in aqueous zinc chloride-potassium chloride electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Leaist, D.G.

    1986-09-01

    Conductimetric and diaphragm cell techniques have been used to measure ternary diffusion coefficients for aqueous zinc chloride-potassium chloride solutions at 25/sup 0/C. At low concentrations where Zn/sup 2 +/ is the major zinc-transporting species, the diffusion-induced electric field along zinc chloride concentration gradients drives large co-current flows of potassium chloride. In concentrated solutions where a large proportion of zinc diffusses as anionic ZnCl/sub 3//sup -/ and ZnCl/sub 4//sup 2 -/ complexes, flow of zinc chloride generates counterflow of potassium chloride. If a sharp zinc chloride is formed in an otherwise uniform solution of potassium chloride, coupled diffusion can concentrate potassium ions within the diffusion boundary. Equations are developed to predict multicomponent transport coefficients for zinc chloride in supporting electrolytes.

  19. Synthesis and Spectroscopic Characterisation of 2,3-Epoxy/3-Chloro-2-hydroxy Propyl Derivatives of Quaternary Ammonium Salts: Useful Cationic Fixing Agents

    Institute of Scientific and Technical Information of China (English)

    SHARIF Saima; AHMAD Saeed; IZHAR-UL-HAQ Mian Muhammad

    2008-01-01

    Eight mono-reactive and four bis-reactive 2,3-epoxy/3-chloro-2-hydroxy propyl derivatives of quaternary ammonium salts have been synthesised by reacting epichlorohydrin with suitable tertiary amines and diamines.Mono-reactive derivatives also contain cyano and carboxylic groups in addition to 2,3-epoxy/3-chloro-2-hydroxy propyl groups. The structures of these quaternary ammonium salts have been characterised using IR and 1H NMR spectroscopic techniques. These quaternary ammonium chlorides have been applied to the cotton fabrics as pretreatments and aftertreatments and promising results have been obtained.

  20. Chloride removal from vitrification offgas

    International Nuclear Information System (INIS)

    This study identified and investigated techniques of selectively purging chlorides from the low-level waste (LLW) vitrification process with the purge stream acceptable for burial on the Hanford Site. Chlorides will be present in high concentration in several individual feeds to the LLW Vitrification Plant. The chlorides are highly volatile in combustion type melters and are readily absorbed by wet scrubbing of the melter offgas. The Tank Waste Remediation System (TWRS) process flow sheets show that the resulting chloride rich scrub solution is recycled back to the melter. The chlorides must be purged from the recycle loop to prevent the buildup of excessively high chloride concentrations

  1. Thermal analysis studies of ammonium uranyl carbonate

    International Nuclear Information System (INIS)

    The simultaneous thermogravimetry and differential thermal analysis of the ammonium uranyl carbonate powder were performed with heat balance in the following atmosphers: Air, Ar and Ar-8%H2. The thermogravimetry and differential thermal analysis curves of the ammonium uranyl carbonate powder obtained from different source were reported and discussed

  2. Modeling the Use of Sulfate Additives for Potassium Chloride Destruction in Biomass Combustion

    DEFF Research Database (Denmark)

    Wu, Hao; Pedersen, Morten Nedergaard; Jespersen, Jacob Boll;

    2014-01-01

    Potassium chloride, KCl, formed from biomass combustion may lead to ash deposition and corrosion problems in boilers. Sulfates are effective additives for converting KCl to the less harmful K2SO4 and HCl. In the present study, the rate constants for decomposition of ammonium sulfate and aluminum......-dependent distribution of SO2 and SO3 from ammonium sulfate decomposition. On the basis of these data as well as earlier results, a detailed chemical kinetic model for sulfation of KCl by a range of sulfate additives was established. Modeling results were compared to biomass combustion experiments in a bubbling...... fluidized-bed reactor using ammonium sulfate, aluminum sulfate, and ferric sulfate as additives. The simulation results for ammonium sulfate and ferric sulfate addition compared favorably to the experiments. The predictions for aluminum sulfate addition were only partly in agreement with the experimental...

  3. Evolution of Electrogenic Ammonium Transporters (AMTs).

    Science.gov (United States)

    McDonald, Tami R; Ward, John M

    2016-01-01

    The ammonium transporter gene family consists of three main clades, AMT, MEP, and Rh. The evolutionary history of the AMT/MEP/Rh gene family is characterized by multiple horizontal gene transfer events, gene family expansion and contraction, and gene loss; thus the gene tree for this family of transporters is unlike the organismal tree. The genomes of angiosperms contain genes for both electrogenic and electroneutral ammonium transporters, but it is not clear how far back in the land plant lineage electrogenic ammonium transporters occur. Here, we place Marchantia polymorpha ammonium transporters in the AMT/MEP/Rh phylogeny and we show that AMTs from the liverwort M. polymorpha are electrogenic. This information suggests that electrogenic ammonium transport evolved at least as early as the divergence of bryophytes in the land plant lineage. PMID:27066024

  4. Synthesis and structure characterization of diethyldiallylammonium chloride

    Institute of Scientific and Technical Information of China (English)

    刘立华; 龚竹青; 郑雅杰

    2003-01-01

    The unsaturated quaternary ammonium salt diethyldiallylammonium chloride(DEDAAC) was synthesized in a two-step synthetic method. The influences of the adding method of raw materials and temperature on the yields of diethylallylamine (DEAA), and drying and temperature on the synthesis of DEDAAC were investigated. The content of in-process product DEAA was determined by non-aqueous titration. The structure of product DEDAAC was identified with IR, 1 H NMR and elemental analysis. The results show that adding allyl chloride and sodium hydroxide alternately can increase the yield of DEAA and decrease by-products. In further synthesizing of DEDAAC from DEAA, the step of drying DEAA is very necessary. When DEAA is dried by solid sodium hydroxide, good columnar crystals with a high purity(mp 199.5-201.0 ℃) are obtained; when DEAA is undried or the content of water in DEAA is above 20%, only platelets with bad quality are obtained even without crystals. The suitable synthesis conditions for DEAA and DEDAAC are 35 ℃, 6 h and 40 ℃, 36 h, respectively, and their yields are 69.7% and 67.3%, respectively.

  5. 49 CFR 176.415 - Permit requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers.

    Science.gov (United States)

    2010-10-01

    ... nitrates, and certain ammonium nitrate fertilizers. 176.415 Section 176.415 Transportation Other... requirements for Division 1.5, ammonium nitrates, and certain ammonium nitrate fertilizers. (a) Except as... Captain of the Port (COTP). (1) Ammonium nitrate UN1942, ammonium nitrate fertilizers containing more...

  6. Influence of the ammonium salt anion on the synergistic solvent extraction of lanthanides with mixtures of thenoyltrifluoroacetone and tridecylamine

    International Nuclear Information System (INIS)

    The synergistic solvent extraction of Pr, Gd and Yb with mixtures of thenoyltrifluoroacetone (HTTA) and primary ammonium salt (tridecylammonium chloride or perchlorate, TDAH(Cl, ClO4)) in C6H6 has been studied. The composition of the extracted species have been determined as Ln(TTA)3TDAHA(A- = Cl- or ClO4-). The values of the equilibrium constant KT,S have been calculated. The influence of the ammonium salt anion on the extraction process has been discussed. The separation factors of the pairs Gd/Pr and Yb/Gd have been determined

  7. [Degradation of succinylcholine chloride].

    Science.gov (United States)

    Németh, G; Török, I; Paál, T

    1993-05-01

    Quantitative thin-layer chormatographic method has been developed for the investigation of the degradation of injection formulations containing succinylcholinium chloride. The method is based on the denistometric determination of the main degradation product, choline at 430 nm after visualization with iodine vapour. The stability of the injection was investigated under various storage conditions and it has been stated that considerable decomposition takes place during as short a period as one week. PMID:8362654

  8. Density Functional Theory Study on Conformers of Benzoylcholine Chloride

    Directory of Open Access Journals (Sweden)

    Mustafa Karakaya

    2013-01-01

    Full Text Available The optimized molecular structures and vibrational frequencies and also gauge including atomic orbital (GIAO 1H and 13C NMR shift values of benzoylcholine chloride [(2-benzoyloxyethyl trimethyl ammonium chloride] have been calculated using density functional theory (B3LYP method with 6-31++G(d basis set. The comparison of the experimental and calculated infrared (IR, Raman, and nuclear magnetic resonance (NMR spectra has indicated that the experimental spectra are formed from the superposition of the spectra of two lowest energy conformers of the compound. So, it was concluded that the compound simultaneously exists in two optimized conformers in the ground state. Also the natural bond orbital (NBO analysis has supported the simultaneous exiting of two conformers in the ground state. The calculated optimized geometric parameters (bond lengths and bond angles and vibrational frequencies for both the lowest energy conformers were seen to be in a well agreement with the corresponding experimental data.

  9. Degradation and bound-residue formation of nonylphenol in red soil and the effects of ammonium

    International Nuclear Information System (INIS)

    Fate of nonylphenol (NP) in soils and the effects of nitrogen fertilizers are unclear. Using 14C-tracer, we studied the aerobic and anaerobic degradation of 4-NP111 in a paddy red soil amended without and with ammonium chloride. Under oxic conditions, 4-NP111 had a half-life of 16.1 ± 1.6 days and minor mineralization (3.84 ± 0.02%), forming no extractable metabolite but abundant bound residues (60.9 ± 1.7%, mostly bound to humin) after 49 days of incubation. The ammonium amendment (8 mmol/kg soil) significantly inhibited the degradation (half-life of 68.0 ± 7.7 days), mineralization (2.0 ± 1.1%), and bound-residue formation (23.7 ± 0.2%). Under anoxic conditions, 4-NP111 did not degrade during 49 days of incubation and the ammonium amendment (40 mmol/kg soil) did not affect its persistence. Our results demonstrate that bound-residue formation was a major mechanism for NP dissipation in the red soil under oxic conditions and that chemical nitrogen fertilizer at average field application rate may already considerably increase NP recalcitrance in agricultural soils. -- Highlights:: • Aerobic mineralization of the nonylphenol isomer 4-NP111 in paddy red soil is minor. • Bound-residue formation is the major mechanism for aerobic NP degradation in soil. • The majority of the bound residues of NP are localized in soil humin fraction. • Amendment of soil by ammonium strongly increase the persistence of NP in oxic soil. • Amendment of soil by ammonium does not affect the recalcitrance of NP in anoxic soil. -- Formation of bound residues was the major mechanism in paddy red soil under oxic conditions for nonylphenol dissipation, which was significantly inhibited by amendment with ammonium

  10. Flotation and adsorption of quaternary ammonium salts collectors on kaolinite of different particle size

    Institute of Scientific and Technical Information of China (English)

    Jiang Hao; Liu Guorong; Hu Yuehua; Xu Longhua; Yu Yawen; Xie Zhen; Chen Haochuan

    2013-01-01

    The flotation behaviors of decyltrimethylammonium (103C),dodecyltrimethylammonium chloride (DTAC),tetradecyltrimethylammonium chloride (TTAC) and cetyltrimethylammonium chloride (CTAC) on kaolinite of different particle size fraction were studied.The adsorbed amount and adsorption isotherms of collectors on kaolinite were determined for painstaking investigation into the adsorption of quaternary amines at kaolinite-water interface by ultraviolet spectrophotometer methods.The flotation results show that the flotation recovery of kaolinite of different particle fraction increases with an increase in pH when 103C,DTAC,TrAC and CTAC are used as collectors.As the concentration of collectors increases,the flotation recovery increases.Particle size of kaolinite has a strong effect on flotation.The flotation recovery of fine kaolinite decreases with the carbon chain of quaternary ammonium salts collectors increasing,while coarse kaolinite is on the contrary.The adsorbed amount tests and adsorption isotherms show that adsorbed amount increases when the particle size of kaolinite increases or when the carbon chain length of quaternary ammonium salts increases.Within the range of flotation collector concentration,the longer the hydrocarbon chain,the more probable to be absolutely adsorbed by fine kaolinite particles and then the lower the collector concentration in the bulk,which leds to lower flotation recovery.

  11. Electrochemically and bioelectrochemically induced ammonium recovery.

    Science.gov (United States)

    Gildemyn, Sylvia; Luther, Amanda K; Andersen, Stephen J; Desloover, Joachim; Rabaey, Korneel

    2015-01-01

    Streams such as urine and manure can contain high levels of ammonium, which could be recovered for reuse in agriculture or chemistry. The extraction of ammonium from an ammonium-rich stream is demonstrated using an electrochemical and a bioelectrochemical system. Both systems are controlled by a potentiostat to either fix the current (for the electrochemical cell) or fix the potential of the working electrode (for the bioelectrochemical cell). In the bioelectrochemical cell, electroactive bacteria catalyze the anodic reaction, whereas in the electrochemical cell the potentiostat applies a higher voltage to produce a current. The current and consequent restoration of the charge balance across the cell allow the transport of cations, such as ammonium, across a cation exchange membrane from the anolyte to the catholyte. The high pH of the catholyte leads to formation of ammonia, which can be stripped from the medium and captured in an acid solution, thus enabling the recovery of a valuable nutrient. The flux of ammonium across the membrane is characterized at different anolyte ammonium concentrations and currents for both the abiotic and biotic reactor systems. Both systems are compared based on current and removal efficiencies for ammonium, as well as the energy input required to drive ammonium transfer across the cation exchange membrane. Finally, a comparative analysis considering key aspects such as reliability, electrode cost, and rate is made. This video article and protocol provide the necessary information to conduct electrochemical and bioelectrochemical ammonia recovery experiments. The reactor setup for the two cases is explained, as well as the reactor operation. We elaborate on data analysis for both reactor types and on the advantages and disadvantages of bioelectrochemical and electrochemical systems. PMID:25651406

  12. Biodegradation of didecyldimethylammonium chloride by Pseudomonas fluorescens TN4 isolated from activated sludge.

    Science.gov (United States)

    Nishihara, T; Okamoto, T; Nishiyama, N

    2000-04-01

    Bacteria that degrade didecyldimethylammonium chloride (DDAC) were isolated from activated sludge from a municipal sewage treatment plant by enrichment culture with DDAC as a sole carbon source. One of the isolates, Pseudomonas fluorescens TN4, degraded DDAC to produce decyldimethylamine and subsequently, dimethylamine, as the intermediates. The TN4 strain also assimilated the other quaternary ammonium compounds (QACs), alkyltrimethyl- and alkylbenzyldimethyl-ammonium salts, but not alkylpyridinium salts. TN4 was highly resistant to these QACs and degraded them by an N-dealkylation process. These data mean that there are some QAC-resistant and QAC-degrading bacteria such as TN4 in the environment. PMID:10792522

  13. Iodide, bromide, and ammonium in hydraulic fracturing and oil and gas wastewaters: environmental implications.

    Science.gov (United States)

    Harkness, Jennifer S; Dwyer, Gary S; Warner, Nathaniel R; Parker, Kimberly M; Mitch, William A; Vengosh, Avner

    2015-02-01

    The expansion of unconventional shale gas and hydraulic fracturing has increased the volume of the oil and gas wastewater (OGW) generated in the U.S. Here we demonstrate that OGW from Marcellus and Fayetteville hydraulic fracturing flowback fluids and Appalachian conventional produced waters is characterized by high chloride, bromide, iodide (up to 56 mg/L), and ammonium (up to 420 mg/L). Br/Cl ratios were consistent for all Appalachian brines, which reflect an origin from a common parent brine, while the I/Cl and NH4/Cl ratios varied among brines from different geological formations, reflecting geogenic processes. There were no differences in halides and ammonium concentrations between OGW originating from hydraulic fracturing and conventional oil and gas operations. Analysis of discharged effluents from three brine treatment sites in Pennsylvania and a spill site in West Virginia show elevated levels of halides (iodide up to 28 mg/L) and ammonium (12 to 106 mg/L) that mimic the composition of OGW and mix conservatively in downstream surface waters. Bromide, iodide, and ammonium in surface waters can impact stream ecosystems and promote the formation of toxic brominated-, iodinated-, and nitrogen disinfection byproducts during chlorination at downstream drinking water treatment plants. Our findings indicate that discharge and accidental spills of OGW to waterways pose risks to both human health and the environment. PMID:25587644

  14. Assessment by X-ray diffraction the process of bentonite organophilization using a different quaternary ammonium salts; Avaliacao por difracao de raios X do processo de organofilizacao de uma bentonita utilizando diferentes sais quaternarios de amonio

    Energy Technology Data Exchange (ETDEWEB)

    Silva, L.A. da; Rosario, J.A. do; Lima, R.B.; Milioli, C.C.; Gusatti, M.; Linhares, R.H.; Kuhnen, N.C.; Riella, H.G., E-mail: lasqmc@hotmail.co [Universidade Federal de Santa Catarina (UFSC), Florianopolis, SC (Brazil). Campus Reitor Joao David Ferreira Lima; Cumbane, A.J. [Universidade Eduardo Mondlane (UEM), Maputo (Mozambique)

    2010-07-01

    The process was conducted in an organophilization Bentonite originated from the Company of Industrial Minerals of Mozambique Ltd. (Mimoc). The transformation of bentonite organophilic clay were performed in laboratory procedures that aim to mechanochemical exchange of Na{sup +} and Ca{sup 2+} from the interlayer space of clay minerals by cations of quaternary ammonium salts. In this study we used two types of salts, which are: the cetyl trimethyl ammonium chloride and alkyl dimethyl benzyl ammonium chloride at different concentrations (30, 50, 80, 100 meq/100 g clay). The natural bentonite and organophilic clay samples were characterized by X-ray diffraction (XRD) to obtain the mineralogical constituents and analysis phases of the increase in interlayer distance confirming the incorporation of quaternary ammonium salts in the structure of clays. (author)

  15. Synthesis, spectroscopic and thermal studies of the copper(II) aspartame chloride complex

    Science.gov (United States)

    Çakır, S.; Coşkun, E.; Naumov, P.; Biçer, E.; Bulut, İ.; İçbudak, H.; Çakır, O.

    2002-08-01

    Aspartame adduct of copper(II) chloride Cu(Asp) 2Cl 2·2H 2O (Asp=aspartame) is synthesized and characterized by elemental analysis, FT IR, UV/vis, ESR spectroscopies, TG, DTG, DTA measurements and molecular mechanics calculations. Aqueous solution of the green solid absorbs strongly at 774 and 367 nm. According to the FT IR spectra, the aspartame moiety coordinates to the copper(II) ion via its carboxylate ends, whereas the ammonium terminal groups give rise to hydrogen bonding network with the water, the chloride ions or neighboring carboxylate groups. The results suggest tetragonally distorted octahedral environment of the copper ions.

  16. Natural Nitrogen—15 Abundance of Ammonium Nitrogen and Fixed Ammonium in Soils

    Institute of Scientific and Technical Information of China (English)

    SHISHU-LIAN; XINGGUANG-XI; 等

    1992-01-01

    The present article deals with the natural nitrogen-15 abundance of ammonium nitrogen and fixed ammonium in different soils.Variations in the natural 15N abundance of ammonium nitrogen mineralized in soils under anaerobic incubation condition were related to soil pH.The δ 15N of mineralizable N in acid soils was lower but that in neutral and calcareous soils was higher compared with the δ 15N of total N in the soils.A variation tendence was also found in the δ 15N of amino-acid N in the hydrolysates of soils.The natural 15N abundance of fixed ammonium was higher than that of total N in most surface soils and other soil horizons,indicating that the increase of δ 15N in the soil borizons beneath subsurface horizon of some forest soils and acid paddy soils was related to the higher δ 15N value of fixed ammonium in the soil.

  17. A study on synthetic method and material characteristics of magnesium ammine chloride as ammonia transport materials for solid SCR

    Energy Technology Data Exchange (ETDEWEB)

    Shin, Jong Kook; Yoon, Cheon Seog [Dept. of Mechanical Engineering, Hannam University, Daejeon (Korea, Republic of); Kim, Hong Suk [Engine Research Center, Korea Institute of Machinery and Materials, Daejeon (Korea, Republic of)

    2015-11-15

    Among various ammonium salts and metal ammine chlorides used as solid materials for the sources of ammonia with solid SCR for lean NOx reduction, magnesium ammine chloride was taken up for study in this paper because of its ease of handling and safety. Lab-scale synthetic method of magnesium ammine chloride were studied for different durations, temperatures, and pressures with proper ammonia gas charged, as a respect of ammonia gas adsorption rate(%). To understand material characteristics for lab-made magnesium ammine chloride, DA, IC, FT-IR, XRD and SDT analyses were performed using the published data available in literature. From the analytical results, the water content in the lab-made magnesium ammine chloride can be determined. A new test procedure for water removal was proposed, by which the adsorption rate of lab-made sample was found to be approximately 100%.

  18. Benchmark binding energies of ammonium and alkyl-ammonium ions interacting with water. Are ammonium-water hydrogen bonds strong?

    Science.gov (United States)

    Vallet, Valérie; Masella, Michel

    2015-01-01

    Alkyl-ammonium ion/water interactions are investigated using high level quantum computations, yielding thermodynamics data in good agreement with gas-phase experiments. Alkylation and hydration lead to weaken the NHsbnd O hydrogen bonds. Upon complete hydration by four water molecules, their main features are close to those of the OHsbnd O bond in the isolated water dimer. Energy decomposition analyses indicate that hydration of alkyl-ammonium ions are mainly due to electrostatic/polarization effects, as for hard monoatomic cations, but with a larger effect of dispersion.

  19. Hydrometallurgical extraction of zinc from CaO treated EAF dust in ammonium chloride solution.

    Science.gov (United States)

    Miki, Takahiro; Chairaksa-Fujimoto, Romchat; Maruyama, Katsuya; Nagasaka, Tetsuya

    2016-01-25

    Zinc in Electric Arc Furnace dust or EAF dust mainly exists as ZnFe2O4 and ZnO. While ZnO can be simply dissolved into either an acidic or alkaline solution, it is difficult to dissolve ZnFe2O4. In our previous work, we introduced a process called "CaO treatment", a preliminary pyrometallurgical process designed to transform the ZnFe2O4 in the EAF dust into ZnO and Ca2Fe2O5. The halogens and others heavy metals were favorably vaporized during CaO treatment with no essential evaporation loss of zinc and iron, leaving CaO treated dust which consisted mainly of ZnO and Ca2Fe2O5 and no problematic ZnFe2O4 compound. In this work, the selective leaching of zinc over iron and calcium in the CaO treated dust was investigated using an NH4Cl solution. The effects of temperature, reaction time and NH4Cl concentration on dissolution behavior were examined. While most of the zinc in the CaO treated dust was extracted after 2 h at 70 °C with 2 M NH4Cl, only about 20% of calcium was leached in NH4Cl solution. However, the iron did not dissolve and remained as Ca2Fe2O5 in residue. It was confirmed that zinc can be effectively recovered using NH4Cl solution. PMID:26448494

  20. Cationic quaternization of cellulose with methacryloyloxy ethyl trimethyl ammonium chloride via ATRP method

    Energy Technology Data Exchange (ETDEWEB)

    Supeno [Cenderawasih University, Jayapura, Papua, Indonesia and School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia); Daik, Rusli, E-mail: rusli@ukm.edu.my [School of Chemical Sciences and Food Technology, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, 43600 Bangi, Selangor (Malaysia); El-Sheikh, Said M. [Nano-Structured Materials Division, Advanced Materials Department, Central Metallurgical Research and Development Institute, Cairo (Egypt)

    2014-09-03

    The synthesis of a cationic cellulose copolymer from cellulose macro-initiator (MCC-BiB) and quaternary compound monomer (METMA) via atom transfer radical polymerization (ATRP) was studied. By using dimethylformamide (DMF), the optimum condition for successful synthesis was at the mole ratio of MCC-BIB:Catalyst:METMA = 1:1:26. The highest copolymer recovery was 93.2 % for 6 h and at 40°C. The copolymer was insoluble in weak polar solvents such as THF and DMF but soluble in methanol and water. The chemistry of cellulose copolymer was confirmed by the FTIR and TGA in which the METMA monomer was used as a reference. The absence of CC bond in the CiB-g-METMA spectrum indicated that graft copolymerization occurred.

  1. Surface tension measurements of aqueous ammonium chloride (NH4Cl) in air

    Science.gov (United States)

    Lowry, S. A.; Mccay, M. H.; Mccay, T. D.; Gray, P. A.

    1989-01-01

    Aqueous NH4Cl's solidification is often used to model metal alloy solidification processes. The present determinations of the magnitude of the variation of aqueous NH4Cl's surface tension as a function of both temperature and solutal concentration were conducted at 3, 24, and 40 C over the 72-100 wt pct water solutal range. In general, the surface tension increases 0.31 dyn/cm per percent decrease in wt pct of water, and decreases 0.13 dyn/cm for each increase in deg C. Attention is given to the experimental apparatus employed.

  2. 77 FR 47291 - Residues of Didecyl Dimethyl Ammonium Chloride; Exemption From the Requirement of a Tolerance

    Science.gov (United States)

    2012-08-08

    ... September 7, 2011 (76 FR 55329) (FRL- 8886-7), EPA issued a notice pursuant to section 408(d)(3) of FFDCA... Quaternaries can be found at 73 FR 37852 (July 2, 2008). IV. Aggregate Exposures In examining aggregate...- HQ-OPP-2006-0572 determined that risks from aggregate exposure are safe, 72 FR 51180 (September...

  3. Reduction in Ammonium Ions in Sludge Liquor

    Directory of Open Access Journals (Sweden)

    Eglė Šlajūtė

    2013-12-01

    Full Text Available Liquor rejected from the centrifugation of the digested sludge can contain the concentrations of ammonium ions up to 1750 mg/L. These loads are usually returned to the intake of wastewater treatment plants (WWTP without additional treatment and can have a negative impact on biological wastewater and/or sludge treatment processes, e.g. phosphorus and nitrogen removal. This article deals with the use of naturally obtained sorbent, zeolite, in batch and column test procedure for removing ammonium from the rejected liquor. This research study was carried out using different sizes of zeolite particles: 0.8–1.6 mm and 1.6–2.5 mm. The highest efficiency of ammonium removal (up to 98 % was achieved by applying the zeolite particles of 0.8–1.6 mm.Article in Lithuanian

  4. Valyl benzyl ester chloride

    Directory of Open Access Journals (Sweden)

    Grzegorz Dutkiewicz

    2010-02-01

    Full Text Available In the title compound (systematic name: 1-benzyloxy-3-methyl-1-oxobutan-2-aminium chloride, C12H18NO2+·Cl−, the ester group is approximately planar, with a maximum deviation of 0.040 (2 Å from the least-squares plane, and makes a dihedral angle of 28.92 (16° with the phenyl ring. The crystal structure is organized by N—H...Cl hydrogen bonds which join the two components into a chain along the b axis. Pairs of chains arranged antiparallel are interconnected by further N—H...Cl hydrogen bonds, forming eight-membered rings. Similar packing modes have been observed in a number of amino acid ester halides with a short unit-cell parameter of ca 5.5 Å along the direction in which the chains run.

  5. Modeling the use of sulfate additives for potassium chloride destruction in biomass combustion

    OpenAIRE

    Wu, Hao; Grell, Morten Nedergaard; Jespersen, Jacob Boll; Aho, Martti; Jappe Frandsen, Flemming; Glarborg, Peter

    2013-01-01

    Potassium chloride, KCl, formed from biomass combustion may lead to ash deposition and corrosion problems in boilers. Sulfates are effective additives for converting KCl to the less harmful K2SO4. In the present study, the decomposition of ammonium sulfate, aluminum sulfate and ferric sulfate was studied respectively in a fast-heating rate thermogravimetric analyzer (TGA) for deriving a kinetic model. The yields of SO2 and SO3 from the decomposition were studied in a tube reactor, revealing t...

  6. Effects of Benzalkonium Chloride on Planktonic Growth and Biofilm Formation by Animal Bacterial Pathogens

    OpenAIRE

    Ebrahimi, Azizollah; Hemati, Majid; Shabanpour, Ziba; Habibian Dehkordi, Saeed; BAHADORAN, Shahab; Lotfalian, Sharareh; Khubani, Shahin

    2015-01-01

    Background: Resistance toward quaternary ammonium compounds (QACs) is widespread among a diverse range of microorganisms and is facilitated by several mechanisms such as biofilm formation. Objectives: In this study, the effects of benzalkonium chloride on planktonic growth and biofilm formation by some field isolates of animal bacterial pathogens were investigated. Materials and Methods: Forty clinical isolates of Escherichia coli, Salmonella serotypes, Staphylococcus aureus and Streptococcus...

  7. Occupational Exposure in Ammonium Phosphate Fertilizer Plants

    International Nuclear Information System (INIS)

    Occupational exposures and activity concentrations have been assessed in two industrial plants producing mono-ammonium phosphate and di-ammonium phosphate fertilizers, located in south-western Spain. The annual effective doses received by the workers are below 1 mSv/a, with the contribution from external exposure being similar to that from internal exposure. The dose contribution from inhalation of dust has been estimated to be about 0.12 mSv/a, while the 222Rn concentrations inside the plants are of no concern. Consequently, no additional radiation protection measures need to be taken to protect the workers in these facilities. (author)

  8. On the evaporation of ammonium sulfate solution

    Energy Technology Data Exchange (ETDEWEB)

    Drisdell, Walter S.; Saykally, Richard J.; Cohen, Ronald C.

    2009-07-16

    Aqueous evaporation and condensation kinetics are poorly understood, and uncertainties in their rates affect predictions of cloud behavior and therefore climate. We measured the cooling rate of 3 M ammonium sulfate droplets undergoing free evaporation via Raman thermometry. Analysis of the measurements yields a value of 0.58 {+-} 0.05 for the evaporation coefficient, identical to that previously determined for pure water. These results imply that subsaturated aqueous ammonium sulfate, which is the most abundant inorganic component of atmospheric aerosol, does not affect the vapor-liquid exchange mechanism for cloud droplets, despite reducing the saturation vapor pressure of water significantly.

  9. Detonation characteristics of ammonium nitrate products

    NARCIS (Netherlands)

    Kersten, R.J.A.; Hengel, E.I.V. van den; Steen, A.C. van der

    2006-01-01

    The detonation properties of ammonium nitrate (AN) products depend on many factors and are therefore, despite the large amount of information on this topic, difficult to assess. In order to further improve the understanding of the safety properties of AN, the European Fertilizer Manufacturers Associ

  10. 76 FR 46907 - Ammonium Nitrate Security Program

    Science.gov (United States)

    2011-08-03

    ... common example is when fertilizer-grade ammonium nitrate is mixed with fuel oil and creates an explosive... Requirements 1. Mixture Requirement 2. Threshold Weight and Individual Products Exemptions 3. Explosives... Federal Bureau of Investigation FR Federal Register HMR Hazardous Materials Regulations HMT...

  11. Montmorillonite modification by quaternary ammonium epoxide

    Czech Academy of Sciences Publication Activity Database

    Duchek, P.; Špírková, Milena; Šabata, Stanislav

    Kochi: India n Society of Nanoscience And Nanotechnology, 2010. s. 1. [Nanotech India 2010. 19.11.2010-21.11.2010, Kochi] R&D Projects: GA AV ČR(CZ) IAAX08240901 Institutional research plan: CEZ:AV0Z40500505; CEZ:AV0Z40720504 Keywords : montmorillonite * quaternary ammonium epoxide * intercalation Subject RIV: JI - Composite Materials

  12. 21 CFR 184.1135 - Ammonium bicarbonate.

    Science.gov (United States)

    2010-04-01

    ... ingredient meets the specifications of the Food Chemicals Codex, 3d Ed. (1981), p. 19, which is incorporated... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium bicarbonate. 184.1135 Section 184.1135 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED)...

  13. 21 CFR 184.1139 - Ammonium hydroxide.

    Science.gov (United States)

    2010-04-01

    ... specifications of the Food Chemicals Codex, 3d Ed. (1981), p. 20, which is incorporated by reference. Copies are... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium hydroxide. 184.1139 Section 184.1139 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  14. 21 CFR 184.1143 - Ammonium sulfate.

    Science.gov (United States)

    2010-04-01

    ... the specifications of the “Food Chemicals Codex,” 3d Ed. (1981), pp. 22-23, which is incorporated by... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium sulfate. 184.1143 Section 184.1143 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  15. 21 CFR 184.1137 - Ammonium carbonate.

    Science.gov (United States)

    2010-04-01

    ... of the Food Chemicals Codex, 3d Ed. (1981), p. 19, which is incorporated by reference. Copies are... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium carbonate. 184.1137 Section 184.1137 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  16. Quaternary ammonium disinfectants cause subfertility in mice by targeting both male and female reproductive processes.

    Science.gov (United States)

    Melin, Vanessa E; Melin, Travis E; Dessify, Brian J; Nguyen, Christina T; Shea, Caroline S; Hrubec, Terry C

    2016-01-01

    Alkyl dimethyl benzyl ammonium chloride (ADBAC) and didecyl dimethyl ammonium chloride (DDAC) are common ingredients in household bathroom and kitchen cleaning sprays. ADBAC+DDAC cause reproductive toxicity in mice. The aim of the present study was to investigate gender-specific reproductive effects from ADBAC+DDAC. Female reproduction was assessed through ovulation, oocyte implantation, and estrus cycling. Male reproductive function was assessed by sperm concentration, motility, and viability. Numbers of corpora lutea were not different after 2 weeks, but decreased after 8 weeks of ADBAC+DDAC exposure. Dams exposed for 5 weeks to ADBAC+DDAC spent significantly less time in estrus. ADBAC+DDAC exposed males exhibited declines in both sperm concentration and motility, but not sperm viability. Subfertility in mice from ADBAC+DDAC exposure is, therefore, mediated through reproductive disturbances in both females and males. While the effect of ADBAC+DDAC exposure on human health is unclear, widespread exposure necessitates further consideration of their potential reproductive toxicity. PMID:26582257

  17. Sodium chloride, potassium chloride, and virulence in Listeria monocytogenes.

    OpenAIRE

    MYERS, E. R.; Dallmier, A W; Martin, S E

    1993-01-01

    Virulence, as determined in a mouse model, and the virulence factor activities of catalase, superoxide dismutase, and listeriolysin O were examined in a parental strain (10403S) and in a nonhemolytic mutant strain (DP-L224) of Listeria monocytogenes. The cells were propagated in media containing various concentrations of sodium chloride or potassium chloride. Strains 10403S and DP-L224 exhibited significant increases in catalase activity and listeriolysin O activity when grown in medium conta...

  18. 40 CFR 721.4095 - Quaternary ammonium alkyltherpropyl trialkylamine halides.

    Science.gov (United States)

    2010-07-01

    ... trialkylamine halides. 721.4095 Section 721.4095 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY... Specific Chemical Substances § 721.4095 Quaternary ammonium alkyltherpropyl trialkylamine halides. (a... generically as quaternary ammonium alkyltherpropyl trialkylamine halides (PMNs...

  19. The role of the anion in the reaction of reducing sugars with ammonium salts.

    Science.gov (United States)

    Agyei-Aye, Kwasi; Chian, May X; Lauterbach, John H; Moldoveanu, Serban C

    2002-11-19

    Reactions of reducing sugars with ammonia and its compounds are important commercially, particularly in the preparation of flavors and caramel colors. However, such reactions generally produce a complex series of products ranging from simple molecules to complex polymeric materials, particularly since commercial systems generally involve mixtures of sugars as opposed to single sugars. This complexity has made understanding the mechanisms of such reactions difficult. Therefore, investigatory work has generally been focused on model systems. Herein we report one such study with model systems: the effects of the nature of the anion of the reactions of reducing sugars with ammonium salts. D-Glucose was reacted in aqueous solution with each of the following ammonium salts: acetate, bicarbonate, carbonate, chloride, citrate, formate, monohydrogenphosphate (DAP), sulfate, and sulfite. These reactions were carried out in a Parr bomb at 93 degrees C for 2.5 h. The initial pH of the reaction mixtures was adjusted to pH 8.0 at 25 degrees C. The resulting mixtures were analyzed by LC-MS, and the results were analyzed by comparing the product yields and distributions with those obtained with DAP. The major reaction product of interest was 2,6-deoxyfructosazine, as it had been shown to be a marker for the polymeric material formed from such reactions. It was found that ammonium salts of weak acids were much more effective in effecting the desired reactions than were those of strong acids; however, none was as effective as DAP. PMID:12433492

  20. 40 CFR 721.10099 - Dialkyl dimethyl ammonium carbonate (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dialkyl dimethyl ammonium carbonate... Specific Chemical Substances § 721.10099 Dialkyl dimethyl ammonium carbonate (generic). (a) Chemical... as dialkyl dimethyl ammonium carbonate (1:1) (PMN P-03-715) is subject to reporting under...

  1. Origin of unusual sintering phenomena in compacts of chloride-derived 3Y-TZP nanopowders

    Directory of Open Access Journals (Sweden)

    Sweeney Sean M.

    2014-01-01

    Full Text Available After evaluating three alternative possibilities, the present study shows that seemingly minor amounts (at least as low as 0.06 wt% of chlorine impurities are responsible for the poor sintering behavior observed in chloride-derived 3 mol% yttria stabilized zirconia (3Y-TZP nanopowders. Models and quantitative estimates are used to explain the role of evolved HCl and ZrCl4 gases in such anomalous behaviors as reduced sintered densities for higher green densities, de-densification, improved sintering in nitrogen over oxygen, and formation of a dense shell microstructure. Two solutions to problematic residual chlorides are compared: 1 a thermal treatment composed of an extended hold at 1000°C to allow HCl gas removal before the onset of closed porosity, and 2 a chemical treatment performed by washing bisque-fired samples at room temperature using a concentrated ammonium hydroxide solution to remove chlorides. The thermal treatment was found to be superior.

  2. Chloride channels in stroke

    Institute of Scientific and Technical Information of China (English)

    Ya-ping ZHANG; Hao ZHANG; Dayue Darrel DUAN

    2013-01-01

    Vascular remodeling of cerebral arterioles,including proliferation,migration,and apoptosis of vascular smooth muscle cells (VSMCs),is the major cause of changes in the cross-sectional area and diameter of the arteries and sudden interruption of blood flow or hemorrhage in the brain,ie,stroke.Accumulating evidence strongly supports an important role for chloride (Clˉ) channels in vascular remodeling and stroke.At least three Clˉ channel genes are expressed in VSMCs:1) the TMEM16A (or Ano1),which may encode the calcium-activated Clˉ channels (CACCs); 2) the CLC-3 Clˉ channel and Clˉ/H+ antiporter,which is closely related to the volume-regulated Clˉ channels (VRCCs); and 3) the cystic fibrosis transmembrane conductance regulator (CFTR),which encodes the PKA-and PKC-activated Clˉ channels.Activation of the CACCs by agonist-induced increase in intracellular Ca2+ causes membrane depolarization,vasoconstriction,and inhibition of VSMC proliferation.Activation of VRCCs by cell volume increase or membrane stretch promotes the production of reactive oxygen species,induces proliferation and inhibits apoptosis of VSMCs.Activation of CFTR inhibits oxidative stress and may prevent the development of hypertension.In addition,Clˉ current mediated by gammaaminobutyric acid (GABA) receptor has also been implicated a role in ischemic neuron death.This review focuses on the functional roles of Clˉ channels in the development of stroke and provides a perspective on the future directions for research and the potential to develop Clˉ channels as new targets for the prevention and treatment of stroke.

  3. Ammonium Bicarbonate Transport in Anion Exchange Membranes for Salinity Gradient Energy

    KAUST Repository

    Geise, Geoffrey M.

    2013-09-17

    Many salinity gradient energy technologies such as reverse electrodialysis (RED) rely on highly selective anion transport through polymeric anion exchange membranes. While there is considerable interest in using thermolytic solutions such as ammonium bicarbonate (AmB) in RED processes for closed-loop conversion of heat energy to electricity, little is known about membrane performance in this electrolyte. The resistances of two commercially available cation exchange membranes in AmB were lower than their resistances in NaCl. However, the resistances of commercially available anion exchange membranes (AEMs) were much larger in AmB than in NaCl, which would adversely affect energy recovery. The properties of a series of quaternary ammonium-functionalized poly(phenylene oxide) and Radel-based AEMs were therefore examined to understand the reasons for increased resistance in AmB to overcome this performance penalty due to the lower mobility of bicarbonate, 4.59 × 10-4 cm2/(V s), compared to chloride, 7.90 × 10-4 cm2/(V s) (the dilute aqueous solution mobility ratio of HCO3 - to Cl- is 0.58). Most membrane resistances were generally consistent with the dilute solution mobilities of the anions. For a few key samples, however, increased water uptake in AmB solution reduced the ionic resistance of the polymer compared to its resistance in NaCl solution. This increased water uptake was attributed to the greater hydration of the bicarbonate ion compared to the chloride ion. The increased resistance due to the use of bicarbonate as opposed to chloride ions in AEMs can therefore be mitigated by designing polymers that swell more in AmB compared to NaCl solutions, enabling more efficient energy recovery using AmB thermolytic solutions in RED. © 2013 American Chemical Society.

  4. Quaternary ammonium compounds – New occupational hazards

    Directory of Open Access Journals (Sweden)

    Agnieszka Lipińska-Ojrzanowska

    2014-10-01

    Full Text Available Quaternary ammonium compounds (QACs, quats belong to organic ionic chemical agents which display unique properties of both surfactants and disinfectants. Their wide distribution in the work environment and also in private households brings about new occupational hazards. This paper reviews reports about the health effects of QACs. QACs could play a role of sensitizers and irritants to the skin and mucous membranes. It is suspected that particular QACs can display an immunologic crossreactivity between each other and with other chemical compounds containing ammonium ion, such as muscle relaxants widely used in anesthesia. They may promote the development of airway allergy, however, the background mechanisms are still unclear and need to be further investigated. Until now, a few cases of occupational asthma induced by QACs have been described and their involvement in contact dermatitis has been documented. The possibility of anaphylaxis due to QACs cannot be excluded as well. Med Pr 2014;65(5:675–682

  5. Detonation Properties of Ammonium Dinitramide (ADN)

    Science.gov (United States)

    Wätterstam, A.; Östmark, H.; Helte, A.; Karlsson, S.

    1999-06-01

    Ammonium Dinitramide, ADN, has a potential as an oxidizer for underwater high explosives. Pure ADN has a large reaction-zone length and shows a strong non-ideal behaviour. The work presented here is an extension of previous work.(Sensitivity and Performance Characterization of Ammonium Dinitramide (ADN). Presented at 11th International Detonation Symposium, Snowmass, CO, 1998.) Experiments for determining the detonation velocity as a function of inverse charge radius and density, reaction-zone length and curvature, and the detonation pressure are presented. Measurements of pressure indicates that no, or weak von-Neumann spike exists, suggesting an immediate chemical decomposition. Experimental data are compared with predicted using thermochemical codes and ZND-theory.

  6. Environmental Factors Affecting Ammonium Oxidation Under Iron Reducing Conditions

    Science.gov (United States)

    Jaffe, P. R.; Huang, S.; Ruiz-Urigüen, M.

    2014-12-01

    Ammonium (NH4+) oxidation coupled to iron (Fe) reduction in the absence of oxygen and nitrate/nitrite (NO3-/NO2-) has been reported by several investigators and referred to as Feammox. Feammox is a biological reaction, where Fe(III) is the electron acceptor, which is reduced to Fe(II), and NH4+ is the electron donor, which is oxidized to NO2-. Through a 180-day anaerobic incubation experiment, and using PCR-DGGE, 454-pyosequecing and qPCR analysis, we have shown that an Acidimicrobiaceae bacterium A6, a previously unreported species in the Acidimicrobiaceae family, might be either responsible or plays a key role in the Feammox process, We have enriched these Feammox bacteria (65.8% in terms of cell numbers) in a membrane reactor, and isolated the pure Acidimicrobiaceae bacterium A6 strain in an autotrophic medium. In samples collected and then incubated from a series of local wetland-, upland-, as well as storm-water detention pond-sediments, Feammox activity was only detected in acidic soil environments that contain Fe oxides. Using primers we developed for this purpose, Acidimicrobiaceae bacterium A6 was detected in all incubations where Feammox was observed. Anaerobic incubations of Feammox enrichment cultures adjusted to different pH, revealed that the optimal pH for Feammox is 4 ~ 5, and the reaction does not proceed when pH > 7. Feammox was still proceeding at pH as low as 2. In Feammox culture amended with different Fe(III) sources, Feammox reaction proceeded only when Fe oxides (ferrihydrite or goethite ) were supplied, whereas samples incubated with ferric chloride or ferric citrate showed no measurable NH4+ oxidation. Furthermore, we have also determined from incubation experiments conducted with a temperature gradient (10 ~ 35℃), that the Feammox process was active when the temperature is above 15℃, and the optimal temperature is 20℃. Incubations of enrichment culture with 79% Feammox bacteria appeared to remove circa 8% more NH4+ at 20ºC than at

  7. Proton dynamics investigation for dimethyl ammonium cation

    International Nuclear Information System (INIS)

    Proton dynamics in dimethyl ammonium cation has been investigated by means of NMR and spin echo methods in polycrystalline salts [NH2(CH3)2]+Bi2J9- and [NH2(CH3)2]+SbJ9-. Spin-lattice relaxation time as well as second moment of NMR line have been measured for influence study of crystal structure changes on proton dynamics

  8. Quaternary ammonium biocides as antimicrobial agents protecting historical wood and brick.

    Science.gov (United States)

    Rajkowska, Katarzyna; Koziróg, Anna; Otlewska, Anna; Piotrowska, Małgorzata; Nowicka-Krawczyk, Paulina; Brycki, Bogumił; Kunicka-Styczyńska, Alina; Gutarowska, Beata

    2016-01-01

    Quaternary ammonium compounds (QACs) are widely used in disinfection of water, surfaces and instruments as well as in textile, leather and food industries because of their relatively low toxicity, broad antimicrobial spectrum, non-volatility and chemical stability. Due to these advantages, QACs are also used in restoration and can be applied on historical material. The aim of this study was to determine the usefulness of biocides based on quaternary ammonium salts and containing various excipients in the protection of historical materials against microbial growth. The study determined the antimicrobial activity of three biocides against bacteria: Pseudomonas fluorescens, Staphylococcus equorum, Bacillus cereus, Bacillus muralis, Sporosarcina aquimarina and Rhodococcus fascians, and moulds: Chaetomium globosum, Penicillium citreonigrum, Cladosporium cladosporioides I, Acremonium strictum, Aspergillus fumigatus and Cladosporium cladosporioides II, all isolated from historical wood and brick. Staphylococcus equorum, Bacillus cereus, Sporosarcina aquimarina and Rhodococcus fascians bacteria, and Cladosporium cladosporioides I and Acremonium strictum moulds showed high sensitivity to quaternary ammonium biocides. Historical wood can be effectively disinfected by three applications of biocide A (30% v/v) containing dodecyl dimethyl ammonium chloride (DDAC), citric acid, propiconazole and propanol. Disinfection of historical brick can be carried out by three applications of 6% v/v solutions of biocide B (based on DDAC and ethylenediaminetetraacetic acid - EDTA) or biocide C (containing a non-ionic surfactant, DDAC and EDTA). Effective protection of historical building materials against microbial growth for a period of seven days can be achieved by the application of biocide A (30% v/v) on the wood surface and biocide B (6% v/v) on the brick surface. PMID:26629794

  9. Development of technology for ammonium nitrate dissociation process

    International Nuclear Information System (INIS)

    Ammonia and ammonium carbonate are frequently used as reagents in fuel production and processing of liquid radioactive wastes. In particular, liquid radioactive wastes that contain ammonium nitrate are generated during operations of metal precipitation. In closed vessels at elevated temperature, for example in evaporators or deposits in tubing, ammonium nitrate may explode due to generation of gaseous nitrogen oxides [2]. In this connection, steps have to be taken to rule out conditions that result in explosion. To do that, ammonium nitrate should be removed even prior to the initial stage of its formation. This report gives results of development of a method of dissociating ammonium nitrate

  10. DETECTION OF THE AMMONIUM ION IN SPACE

    Energy Technology Data Exchange (ETDEWEB)

    Cernicharo, J.; Tercero, B. [Deparment of Astrophysics, CAB, INTA-CSIC, Crta Torrejon-Ajalvir Km 4, E-28850 Torrejon de Ardoz, Madrid (Spain); Fuente, A. [Observatorio Astronomico Nacional, Apdo. 112, E-28803 Alcala de Henares (Spain); Domenech, J. L.; Cueto, M.; Carrasco, E.; Herrero, V. J.; Tanarro, I. [Instituto de Estructura de la Materia, IEM-CSIC, Serrano 123, E-28006 Madrid (Spain); Marcelino, N. [NRAO, 520 Edgemont Road, Charlottesville, VA 22902 (United States); Roueff, E. [Luth, Observatoire de Paris, CNRS UMR8102, Place J. Janssen F-92190 Meudon (France); Gerin, M. [LERMA, Observatoire de Paris, CNRS UMR8112 and Ecole Normale Superieure, 61 Avenue de lObservatoire, F-75014 Paris (France); Pearson, J., E-mail: jcernicharo@cab.inta-csic.es [Jet Propulsion Laboratory, 4800 Oak Grove Drive, MC 168-314, Pasadena, CA 91109 (United States)

    2013-07-01

    We report on the detection of a narrow feature at 262816.73 MHz toward Orion and the cold prestellar core B1-bS which we attribute to the 1{sub 0}-0{sub 0} line of the deuterated ammonium ion, NH{sub 3}D{sup +}. The observations were performed with the IRAM 30 m radio telescope. The carrier has to be a light molecular species as it is the only feature detected over 3.6 GHz of bandwidth. The hyperfine structure is not resolved, indicating a very low value for the electric quadrupolar coupling constant of nitrogen which is expected for NH{sub 3}D{sup +} as the electric field over the N nucleus is practically zero. Moreover, the feature is right at the predicted frequency for the 1{sub 0}-0{sub 0} transition of the ammonium ion, 262817 {+-} 6 MHz (3{sigma}), using rotational constants derived from new infrared data obtained in our laboratory in Madrid. The estimated column density is (1.1 {+-} 0.2) Multiplication-Sign 10{sup 12} cm{sup -2}. Assuming a deuterium enhancement similar to that of NH{sub 2}D, we derive N(NH{sub 4}{sup +}) {approx_equal} 2.6 Multiplication-Sign 10{sup 13} cm{sup -2}, i.e., an abundance for ammonium of a few 10{sup -11}.

  11. Sorption of dodecyltrimethylammonium chloride (DTAC) to agricultural soils.

    Science.gov (United States)

    Xiang, Lei; Sun, Teng-Fei; Zheng, Mei-Jie; Li, Yan-Wen; Li, Hui; Wong, Ming-Hung; Cai, Quan-Ying; Mo, Ce-Hui

    2016-08-01

    Quaternary ammonium compounds (QACs) used as cationic surfactants are intensively released into environment to be pollutants receiving more and more concerns. Sorption of dodecyltrimethylammonium chloride (DTAC), one of commonly used alkyl QACs, to five types of agricultural soils at low concentrations (1-50mg/L) was investigated using batch experiments. DTAC sorption followed pseudo-second-order kinetics and reached reaction equilibrium within 120min. Both Freundlich model and Langmuir model fitted well with DTAC isotherm data with the latter better. DTAC sorption was spontaneous and favorable, presenting a physical sorption dominated by ion exchanges. Sorption distribution coefficient and sorption affinity demonstrated that soil clay contents acted as a predominant phase of DTAC sorption. DTAC could display a higher mobility and potential accumulation in crops in the soils with lower clay contents and lower pH values. Sorption of DTAC was heavily affected by ions in solution with anion promotion and cation inhibition. PMID:27101455

  12. Characterization of incubation experiments and development of an enrichment culture capable of ammonium oxidation under iron reducing conditions

    Science.gov (United States)

    Huang, S.; Jaffé, P. R.

    2014-08-01

    Incubation experiments were conducted using soil samples from a forested riparian wetland where we have previously observed anaerobic ammonium oxidation coupled to iron reduction. Production of both nitrite and ferrous iron were measured repeatedly during incubations when the soil slurry was supplied with either ferrihydrite or goethite and ammonium chloride. Significant changes in the microbial community were observed after 180 days of incubation as well as in a continuous flow membrane reactor, using 16S rRNA gene PCR-denaturing gradient gel electrophoresis, 454-pyrosequencing, and real-time quantitative PCR analysis. We believe that one of the dominant microbial species in our system (an uncultured Acidimicrobiaceae bacterium A6), belonging to the Acidimicrobiaceae family, whose closest cultivated relative is Ferrimicrobium acidiphilum (with 92% identity) and Acidimicrobium ferrooxidans (with 90% identity), might play a key role in this anaerobic biological process that uses ferric iron as an electron acceptor while oxidizing ammonium to nitrite. After ammonium was oxidized to nitrite, nitrogen loss proceeded via denitrification and/or anammox.

  13. Influence of the ammonium salt anion on the synergistic solvent extraction of lanthanides with mixtures of thenoyltrifluoroacetone and tridecylamine

    Energy Technology Data Exchange (ETDEWEB)

    Dukov, I.L.; Jordanov, V.M. [Univ. of Chemical Technology and Metallurgy, Sofia (Bulgaria). Dept. of Inorganic Chemistry

    1998-08-01

    The synergistic solvent extraction of Pr, Gd and Yb with mixtures of thenoyltrifluoroacetone (HTTA) and primary ammonium salt (tridecylammonium chloride or perchlorate, TDAH(Cl, ClO{sub 4})) in C{sub 6}H{sub 6} has been studied. The composition of the extracted species have been determined as Ln(TTA){sub 3}TDAHA(A{sup {minus}} = Cl{sup {minus}} or ClO{sub 4}{sup {minus}}). The values of the equilibrium constant K{sub T,S} have been calculated. The influence of the ammonium salt anion on the extraction process has been discussed. The separation factors of the pairs Gd/Pr and Yb/Gd have been determined.

  14. Ion complex membranes of acrylonitrile copolymers having methacrylic acid and amphiphilic quaternized ammonium groups for uracil molecular imprinting

    International Nuclear Information System (INIS)

    Copolymers having methacrylic acid and amphiphilic quaternized ammonium groups were used for preparation of molecular imprinting membrane of uracil (URA) template. The imprinted polymeric membranes were prepared by phase inversion molecular imprinting by using poly(acrylonitrile-co-methylacrylic acid) [P(AN-co-MAA)] and poly(acrylonitrile-co-vinylbenzyl-stearyldimethylamine chloride) [P(AN-co-SMA)]. Evidence confirmed that both copolymers were mixed to form ion complex by electrostatic interaction between the methacrylic acid and the quaternized ammonium groups. The electrostatic networks of the resultant membranes made the membrane dense and useful for molecule recognition of the template. The imprinted membranes made of different mole ratio of their copolymer segments were examined in binding of URA and other analog molecules

  15. Review:Anaerobic ammonium oxidation for treatment of ammonium-rich wastewaters

    Institute of Scientific and Technical Information of China (English)

    Lei ZHANG; Ping ZHENG; Chongojian TANG; Ren-cun JIN

    2008-01-01

    The concept of anaerobic ammonium oxidation (ANAMMOX) is presently of great interest.The functional bacteria belonging to the Planctomycete phylum and their metabolism are investigated by microbiologists.Meanwhile,the ANAMMOX is equally valuable in treatment of ammonium-rich wastewaters.Related processes including partial nitritation-ANAMMOX and completely autotrophic nitrogen removal over nitrite (CANON) have been developed,and lab-scale experiments proved that both processes were quite feasible in engineering with appropriate control.Successful full-scale practice in the Netherlands will ac-celerate application of the process in future.This review introduces the microbiology and more focuses on application of the ANAMMOX process.

  16. Chloride in vesicular trafficking and function.

    Science.gov (United States)

    Stauber, Tobias; Jentsch, Thomas J

    2013-01-01

    Luminal acidification is of pivotal importance for the physiology of the secretory and endocytic pathways and its diverse trafficking events. Acidification by the proton-pumping V-ATPase requires charge compensation by counterion currents that are commonly attributed to chloride. The molecular identification of intracellular chloride transporters and the improvement of methodologies for measuring intraorganellar pH and chloride have facilitated the investigation of the physiology of vesicular chloride transport. New data question the requirement of chloride for pH regulation of various organelles and furthermore ascribe functions to chloride that are beyond merely electrically shunting the proton pump. This review surveys the currently established and proposed intracellular chloride transporters and gives an overview of membrane-trafficking steps that are affected by the perturbation of chloride transport. Finally, potential mechanisms of membrane-trafficking modulation by chloride are discussed and put into the context of organellar ion homeostasis in general. PMID:23092411

  17. Stability of succinylcholine chloride injection.

    Science.gov (United States)

    Schmutz, C W; Mühlebach, S F

    1991-03-01

    The stability of succinylcholine chloride injection prepared by a hospital pharmacy was studied under a wide variety of conditions. Batches of succinylcholine chloride injection 10 mg/mL containing sodium chloride, methyl-4-hydroxybenzoate, hydrochloric acid, and water were prepared. Samples were tested for the effect of initial pH (3.0 and 4.2) and sterilization (steam treatment at 100 degrees C for 30 minutes and 121 degrees C for 20 minutes) on stability after three weeks; long-term stability under refrigeration (12, 17, and 23 months of storage at 4 degrees C); and the effect of storage temperature (4-6 degrees C, 20-26 degrees C, 35 degrees C, and 70 degrees C) and light exposure at various intervals up to 12 months. Samples were analyzed by thin-layer chromatography (TLC) and high-performance liquid chromatography (HPLC). Unlike heating at 121 degrees C, heating at 100 degrees C produced no significant loss of succinylcholine chloride, independent of the initial pH. Succinylcholine chloride was hydrolyzed only minimally over 23 months if the solution was stored at 4-6 degrees C. A 10% loss of drug content occurred if solutions were kept at 20-26 degrees C for five months, at 35 degrees C for one month, or at 70 degrees C for one day. Initial degradation was slowed if the solution was protected from light. The assessments by TLC proved to be more sensitive than the HPLC measurements. Succinylcholine chloride injection sterilized at 100 degrees C for 30 minutes can be stored for up to five months at room temperature if protected from light. The preparation is stable for at least two years under refrigeration. PMID:2028996

  18. Chloride binding of cement-based materials subjected to external chloride environment - A review

    OpenAIRE

    Yuan, Q.; Shi, C; Schutter, G. de; Audenaert, K.; Deng, D.

    2009-01-01

    This paper reviews the chloride binding of cement-based materials subjected to external chloride environments. Chloride ion exist either in the pore solution, chemically bound to the hydration products, or physically held to the surface of the hydration products. Chloride binding of cement-based material is very complicated and influenced by many factors, such as chloride concentration, cement composition, hydroxyl concentration, cation of chloride salt, temperature, supplementary cementing m...

  19. Review: Mechanisms of ammonium toxicity and the quest for tolerance.

    Science.gov (United States)

    Esteban, Raquel; Ariz, Idoia; Cruz, Cristina; Moran, Jose Fernando

    2016-07-01

    Ammonium sensitivity of plants is a worldwide problem, constraining crop production. Prolonged application of ammonium as the sole nitrogen source may result in physiological and morphological disorders that lead to decreased plant growth and toxicity. The main causes of ammonium toxicity/tolerance described until now include high ammonium assimilation by plants and/or low sensitivity to external pH acidification. The various ammonium transport-related components, especially the non-electrogenic influx of NH3 (related to the depletion of (15)N) and the electrogenic influx of NH4(+), may contribute to ammonium accumulation, and therefore to NH3 toxicity. However, this accumulation may be influenced by increasing K(+) concentration in the root medium. Recently, new insights have been provided by "omics" studies, leading to a suggested involvement of GDP mannose-pyrophosphorylase in the response pathways of NH4(+) stress. In this review, we highlight the cross-talk signaling between nitrate, auxins and NO, and the importance of the connection of the plants' urea cycle to metabolism of polyamines. Overall, the tolerance and amelioration of ammonium toxicity are outlined to improve the yield of ammonium-grown plants. This review identifies future directions of research, focusing on the putative importance of aquaporins in ammonium influx, and on genes involved in ammonium sensitivity and tolerance. PMID:27181951

  20. Outer-Sphere Coordination Chemistry: Amido-Ammonium Ligands as Highly Selective Tetrachloridozinc(II)ate Extractants

    OpenAIRE

    Turkington, Jennifer R; Cocalia, Violina; Kendall, Katrina; Morrison, Carole A.; Richardson, Patricia; Sassi, Thomas; Tasker, Peter A.; Bailey, Philip J.; Sole, Kathryn C.

    2012-01-01

    Eight new amido functionalized reagents, L-1-L-8, have been synthesized containing the sequence of atoms R2N-CH2-NR'-CO-R '', which upon protonation forms a six-membered chelate with a hydrogen bond between the tertiary ammonium N-H+ group and the amido oxygen atom. The monocationic ligands, LH+, extract tetrachloridometal(II)ates from acidic solutions containing high concentrations of chloride ions via a mechanism in which two ligands address the "outer sphere" of the [MCl4](2-) unit using b...

  1. [Achievement of Sulfate-Reducing Anaerobic Ammonium Oxidation Reactor Started with Nitrate-Reducting Anaerobic Ammonium Oxidation].

    Science.gov (United States)

    Liu, Zheng-chuan; Yuan, Lin-jiang; Zhou, Guo-biao; Li, Jing

    2015-09-01

    The transformation of nitrite-reducing anaerobic ammonium oxidation to sulfate-reducing anaerobic ammonium oxidation in an UASB was performed and the changes in microbial community were studied. The result showed that the sulfate reducing anaerobic ammonium oxidation process was successfully accomplished after 177 days' operation. The removal rate of ammonium nitrogen and sulfate were up to 58. 9% and 15. 7%, the removing load of ammonium nitrogen and sulfate were 74. 3 mg.(L.d)-1 and 77. 5 mg.(L.d)-1 while concentration of ammonium nitrogen and sulfate of influent were 130 mg.(L.d)-1 and 500 mg.(L.d)-1, respectively. The lost nitrogen and sulphur was around 2 in molar ratio. The pH value of the effluent was lower than that of the influent. Instead of Candidatus brocadia in nitrite reducing anaerobic ammonium oxidation granular sludge, Bacillus benzoevorans became the dominant species in sulfate reducing anaerobic ammonium oxidation sludge. The dominant bacterium in the two kinds of anaerobic ammonium oxidation process is different. Our results imply that the two anaerobic ammonium oxidation processes are carried out by different kind of bacterium. PMID:26717697

  2. Sequential diffusion of ammonium and nitrate from soil extracts to a polytetrafluoroethylene trap for 15N determination

    International Nuclear Information System (INIS)

    A novel diffusion method was used for preparation of NH4+- and NO3--N samples from soil extracts for 15N determination. Ammonium, and nitrate following reduction to ammonia, are allowed to diffuse to an acid-wetted glass filter enclosed in polytetrafluoroethylene tape. The method was evaluated with simulated soil extracts obtained using 50 ml of 2 M potassium chloride solution containing 130 μg of NH4=-N (2.3 atom% 15N) and 120 μg of NO3--N (natural 15N abundance). No cross-over in the 15N abundances of NH4+-N and NO3--N was observed, indicating a quantitative diffusion process (72 h, 25 deg C). Owing to the presence of inorganic nitrogen impurities in the potassium chloride, the 15N enrichments should be corrected for the blank nitrogen content. (author). 8 refs.; 1 tab

  3. 1,5-Diaminotetrazolium chloride

    Directory of Open Access Journals (Sweden)

    Ling-Qiao Meng

    2010-04-01

    Full Text Available The title compound, CH5N6+·Cl−, crystallized with two indepedent 1,5-diaminotetrazolium cations and two independent chloride anions in the asymmetric unit. In the crystal, there are a number of N—H...Cl hydrogen-bonding interactions, which generate a three-dimensional network.

  4. Quaternary Ammonium Polyethyleneimine: Antibacterial Activity Ira

    International Nuclear Information System (INIS)

    Quaternary ammonium polyethyleneimine- (QA-PEI-) based nanoparticles were synthesized using two synthetic methods, reductive amination and N-alkylation. According to the first method, QA-PEI nanoparticles were synthesized by cross-linking with glutaraldehyde followed by reductive amination with octanal and further N-methylation with methyl iodide. The second method is based on crosslinking with dialkyl halide followed by N-alkylation with octyl halide and further N-methylation with methyl iodide. QA-PEI nanoparticles completely inhibited bacterial growth (>106 bacteria), including both Gram-positive, that is, Staphylococcus aureus at 80 μ/mL, and Gram-negative, that is, Escherichia coli at 320 μ/mL. Activity analysis revealed that the degree of alkylation and N-methylation of the QA-PEI nanoparticles plays a significant role in antibacterial activity of the reagent. The most potent compound was octyl alkylated QA-PEI alkylated at 1 : 1 mole ratio (primary amine of PEI monomer units/alkylating agent). Also, cytotoxicity studies on MAT-LyLu and MBT cell lines were performed with QA-PEI nanoparticles. These findings confirm previous reports that poly cations bearing quaternary ammonium moieties inhibit bacterial growth in vitro and have a potential use as additives in medical devices which need antibacterial properties.

  5. Inhibition of bacterial and phytoplanktonic metabolic activity in the lower River Rhine by ditallowdimethylammonium chloride.

    Science.gov (United States)

    Tubbing, D M; Admiraal, W

    1991-12-01

    The effects of a quaternary ammonium compound, ditallowdimethylammonium chloride (DTDMAC), on natural populations of bacteria and phytoplankton from the lower River Rhine were examined to estimate their sensitivity to the discharges of cationic surfactants in the river basin. In short-term experiments, significant decreases in the growth rate of bacterioplankton and in the photosynthetic rate of phytoplankton were observed at a nominal concentration of 0.03 to 0.1 mg of DTDMAC liter-1. Nitrification was measured with an ion-selective electrode and by the rate of acid production in ammonium-spiked river water and was found to be only sensitive to the addition of concentrations higher than 1 mg of DTDMAC liter-1. This does not support an earlier suggestion that ammonium-oxidizing bacteria are specifically sensitive to quaternary ammonium compounds. The effect of DTDMAC on thymidine incorporation was shown to depend strongly on the concentration of suspended material, which varied with the sampling date. This effect was also quantified in experimental manipulations with Rhine water. Calculations on the partitioning of DTDMAC between water and suspended matter confirmed the role of suspended solids and showed that an increase of the dissolved DTDMAC concentration in Rhine water by circa 0.01 mg liter-1 leads to a slight inhibition of the growth of heterotrophic bacteria. It is concluded that a total concentration of circa 0.01 mg of DTDMAC liter-1 measured in the River Rhine is likely to have biological consequences. PMID:1785934

  6. Selective removal and inactivation of bacteria by nanoparticle composites prepared by surface modification of montmorillonite with quaternary ammonium compounds.

    Science.gov (United States)

    Khalil, Rowaida K S

    2013-10-01

    The purpose of the present study was to prepare new nanocomposites with antibacterial activities by surface modification of montmorillonite using quaternary ammonium compounds that are widely applied as disinfectants and antiseptics in food-processing environments. The intercalation of four quaternary ammonium compounds namely benzalkonium chloride, cetylpyridinium chloride monohydrate, hexadecyltrimethylammonium bromide, tetraethylammonium chloride hydrate into montmorillonite layers was confirmed by X-ray diffraction. The antibacterial influences of the modified clay variants against important foodborne pathogens differed based on modifiers quantities, microbial cell densities, and length of contact. Elution experiments through 0.1 g of the studied montmorillonite variants indicated that Staphylococcus aureus, Pseudomonas aeroginosa, and Listeria monocytogenes were the most sensitive strains. 1 g of hexadecyltrimethylammonium bromide intercalated montmorillonites demonstrated maximum inactivation of L. monocytogenes populations, with 4.5 log c.f.u./ml units of reduction. In adsorption experiments, 0.1 g of tetraethylammonium chloride hydrate montmorillonite variants significantly reduced the growth of Escherichia coli O157:H7, L. monocytogenes, and S. aureus populations by 5.77, 6.33, and 7.38 log units respectively. Growth of wide variety of microorganisms was strongly inhibited to undetectable levels (food processing plant environments where selectivity in removal and/or inactivation of species in fluid flow streams is desirable. Nevertheless, extensive in vitro and in vivo studies of these new nanocomposites is essential to outpace the understanding of their potential impacts and consequences on human health and the environment if they will make an appearance in commercialized food packaging and containment food materials in the future. PMID:23709187

  7. Antibacterial cotton fibers treated with silver nanoparticles and quaternary ammonium salts.

    Science.gov (United States)

    Kang, Chan Kyu; Kim, Sam Soo; Kim, Soojung; Lee, Jintae; Lee, Jin-Hyung; Roh, Changhyun; Lee, Jaewoong

    2016-10-20

    Cotton fibers were treated chemically with glycidyltrimethylammonium chloride (GTAC), a quaternary ammonium salt, and coated with silver nanoparticles/3-mercaptopropyltrimethoxysilane (3-MPTMS) to increase the antibacterial efficacy. The coating process was accomplished by soaking the cotton fibers into a GTAC solution followed by a dry-cure method, and silver colloid/3-MPTMS solution was then applied at 43°C for 90min. The properties of the cotton fibers were analyzed by scanning electron microscopy, X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis. SEM showed a rough surface when the cotton fibers were treated with GTAC/3-MPTMS/silver nanoparticles due to the increasing surface attachment. The existence of silver and 3-MPTMS on the cotton fibers was confirmed by XPS. The cotton fibers treated with both GTAC and silver nanoparticles showed synergistic antibacterial properties against P. aeruginosa. PMID:27474649

  8. Design requirements for uranium ion exchange from ammonium bicarbonate solutions in a fluidized system

    International Nuclear Information System (INIS)

    A fluidized countercurrent ion-exchange system was developed, operated, and evaluated. The system consisted of integrated multiple-compartment absorption and elution columns in which the solution flows were continuous except for short periods when resin increments were withdrawn. The exchange of uranyl carbonate between a simulated in situ uranium leach liquor and a strong-base ion-exchange resin together with the subsequent elution with an ammonium chloride solution was studied. The effects of the number of sections, section height, amount of resin withdrawal, solution flow rate, and column diameter were investigated. The kinetic and equilibrium relationships for the absorption and elution steps were also examined. The experimental data indicate a strong interdependence between variables. Solution retention time appears to be a major limiting variable in the absorption process, while resin residence time is the determining factor in the elution process. The column was efficient over a range of conditions, but close control was needed for optimum operation. 30 figures

  9. Progress of Carbonation in Chloride Contaminated Concretes

    OpenAIRE

    Wang, Yaocheng; Basheer, P.A.M.; Nanukuttan, S; Bai, Y.

    2016-01-01

    Concretes used in marine environment are generally under the cyclic effect of CO2 and chloride ions (Cl-). To date, the influence of carbonation on ingress of chloride ions in concretes has been widely studied; in comparison, study on the influence of Cl- on the progress of carbonation is limited. During the study, concretes were exposed to independent and combined mechanisms of carbonation and chloride ingress regimes. Profiles of apparent pH and chloride concentration were used to indicate ...

  10. Synthesis and characterization of methacrylamidopropyltrimethylammonium chloride and N-substituted acrylamide ionomers

    Directory of Open Access Journals (Sweden)

    2007-11-01

    Full Text Available Quaternary ammonium ionomers of Methacrylamidopropyltrimethyl ammonium chloride with N-substituted acrylamides were prepared at 55±1°C using azobiscyanovaleric acid (ACVA initiator. The monomers and ionomers were characterized by 1H- and 13C-NMR spectroscopy and the copolymer composition was calculated from elemental analysis data. The reduced viscosity of ionomers in methanol behaves as non-polyelectrolytes at lower mole percentage and as polyelectrolyte at higher mole percentage. The molecular weights of ionomers were found to be high and the polydispersity index values indicate termination mainly by disproportionation. The glass transition temperature (Tg of ionomers were greater than those of the corresponding homopolymers, attributed to a reduction in segmental mobility. The initial decomposition temperature (IDT showed that the stability of ionomers increases with increasing mole percentage of ionic content.

  11. Modeling the use of sulfate additives for potassium chloride destruction in biomass combustion

    DEFF Research Database (Denmark)

    Wu, Hao; Grell, Morten Nedergaard; Jespersen, Jacob Boll;

    2013-01-01

    Potassium chloride, KCl, formed from biomass combustion may lead to ash deposition and corrosion problems in boilers. Sulfates are effective additives for converting KCl to the less harmful K2SO4. In the present study, the decomposition of ammonium sulfate, aluminum sulfate and ferric sulfate was...... studied respectively in a fast-heating rate thermogravimetric analyzer (TGA) for deriving a kinetic model. The yields of SO2 and SO3 from the decomposition were studied in a tube reactor, revealing that the ratio of the SO3/SO2 released varied for different sulfate and for ammonium sulfate the ratio was...... affected by the decomposition temperature. Based on the experimental data, a model was proposed to simulate the sulfation of KCl by different sulfate addition, and the simulation results were compared with pilot-scale experiments conducted in a bubbling fluidized bed reactor. The simulation results of...

  12. CHARACTERISTICS OF QUATERNARY AMMONIUM RESISTANT BACTERIA FROM A FINE PAPERMACHINE SYSTEM

    Institute of Scientific and Technical Information of China (English)

    Hweig Wang; ChiYu Huang; ChunHan Ko

    2004-01-01

    To evaluate the biocide effect of quaternary ammonium chloride (QAC), a whitewater sample was taken from a fine papermachine headbox. By plate spreading method, 51 strains of facultative anaerobe were isolated morphologically. Then the strains were separately transferred to basal medium and were incubated before the beginning of log phase. To identify strains with different QAC resistance, 30-120 ppm of N-Alkyl-benzyl-dimethyl ammonium chloride were added to basal medium.Biocide effect was investigated by comparison of bacterial growth, which can be monitored by 600 nm light absorbance of basal medium suspension. Among 51 strains, only 2 strains can Survive for QAC concentration up to 120 ppm. API20E aud 16S rRNA gene sequencing technique were applied to identify two strains with highest (120 ppm)QAC resistance. One strain (HB22)was identified as Morganella morganii. HB22 can resist QAC concentration up to 150 ppm. HB22 is Gram-negative rod, motile with flagella, catalase positive, oxidase negative, Indole positive, H2S production negative, facultative anaerobe. HB22 has optimum growth condition of 35℃ and pH 7.0.HB22 can catabolize only glucose and D (+)-Mannose.The other (HB45) was identified with high similarity among Pseudomonas cf. monteili or Pseudomonas mosselii or Pseudomonas putida. HB45 can resist QAC concentration up to 200 ppm.HB45 is Gram-negative rod, motile with flagella,catalase positive, oxidase negative, Indole negative,H2S production negative, aerobe. HB45 has optimum growth condition of 30℃ and pH 7.4. HB45 can catabolize L-Arabinose, L(+)-Rhanmose, D (+)-Mannose, Glucose, Glycerol, Lactose, Maltose,Raffmose, Xylose, Cellulose and Xylan. The implication of this work to paper industry is also discussed.

  13. Chloride sublimation of gold-arsenic concentrates

    International Nuclear Information System (INIS)

    Present article is devoted to chloride sublimation of gold-arsenic concentrates. The results of studies of chloride sublimation of gold-arsenic comprising concentrates of Chore deposit of Tajikistan are considered. It is found that by application sodium chloride for gold-arsenic comprising concentrates it is possible to extract gold and silver from flotation concentrates.

  14. 21 CFR 582.5446 - Manganese chloride.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Manganese chloride. 582.5446 Section 582.5446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) ANIMAL... Supplements 1 § 582.5446 Manganese chloride. (a) Product. Manganese chloride. (b) Conditions of use....

  15. Thermal decomposition characteristics of ammonium dinitramide. Part 1; Anmoniumu jinitoramido no netsubunkai tokusei. 1

    Energy Technology Data Exchange (ETDEWEB)

    Takishita, Y.; Teramoto, Y. [Japan Defence Agency, Tokyo (Japan)

    1997-02-28

    At present, the mainstream of the oxidizer of solid propellant used in defense and space exploitation is ammonium perchlorate (AP), while a large amount of hydrogen chloride is generated by AP-based propellant due to chlorine existing in AP molecules. Ammonium dinitramide (ADN) is paid attention recently as a new none-chlorine energetic oxidizer. ADN, with the specific driving force equal to that of AP, is expected as a propellant-oxidizer to meet simultaneously the demands for the improvement of concealment and the prevention of environmental pollution while the high specific driving force is maintained. In this study, thermal decomposition characteristics of ADN is investigated by thermal analysis and mass spectroscopy. The activation energies calculated based on velocity theory are 105kj/mole, 117kj/mole and 151kj/mole respectively at the initial temperature sought from thermal gravity (TG) curve, the peak temperature of decompositing calorification in differential thermal analysis curve, and the temperature from which weight loss is 50% in TG curve. 6 refs., 6 figs., 1 tab.

  16. Enhanced water-solubility, antibacterial activity and biocompatibility upon introducing sulfobetaine and quaternary ammonium to chitosan.

    Science.gov (United States)

    Chen, Yuxiang; Li, Jianna; Li, Qingqing; Shen, Yuanyuan; Ge, Zaochuan; Zhang, Wenwen; Chen, Shiguo

    2016-06-01

    Chitosan (CS) has attracted much attention due to its good antibacterial activity and biocompatibility. However, CS is insoluble in neutral and alkaline aqueous solution, limiting its biomedical application to some extent. To circumvent this drawback, we have synthesized a novel N-quaternary ammonium-O-sulfobetaine-chitosan (Q3BCS) by introducing quaternary ammonium compound (QAC) and sulfobetaine, and its water-solubility, antibacterial activity and biocompatibility were evaluated compare to N-quaternary ammonium chitosan and native CS. The results showed that by introducing QAC, antibacterial activities and water-solubilities increase with degrees of substitution. The largest diameter zone of inhibition (DIZ) was improved from 0 (CS) to 15mm (N-Q3CS). And the water solution became completely transparent from pH 6.5 to pH 11; the maximal waters-solubility was improved from almost 0% (CS) to 113% at pH 7 (N-Q3CS). More importantly, by further introducing sulfobetaine, cell survival rate of Q3BCS increased from 30% (N-Q3CS) to 85% at 2000μg/ml, which is even greater than that of native CS. Furthermore, hemolysis of Q3BCS was dropped sharply from 4.07% (N-Q3CS) to 0.06%, while the water-solution and antibacterial activity were further improved significantly. This work proposes an efficient strategy to prepare CS derivatives with enhanced antibacterial activity, biocompatibility and water-solubility. Additionally, these properties can be finely tailored by changing the feed ratio of CS, glycidyl trimethylammonium chloride and NCO-sulfobetaine. PMID:27083366

  17. Hydration Structure of the Quaternary Ammonium Cations

    KAUST Repository

    Babiaczyk, Wojtek Iwo

    2010-11-25

    Two indicators of the hydropathicity of small solutes are introduced and tested by molecular dynamics simulations. These indicators are defined as probabilities of the orientation of water molecules\\' dipoles and hydrogen bond vectors, conditional on a generalized distance from the solute suitable for arbitrarily shaped molecules. Using conditional probabilities, it is possible to distinguish features of the distributions in close proximity of the solute. These regions contain the most significant information on the hydration structure but cannot be adequately represented by using, as is usually done, joint distance-angle probability densities. Our calculations show that using our indicators a relative hydropathicity scale for the interesting test set of the quaternary ammonium cations can be roughly determined. © 2010 American Chemical Society.

  18. Surge ammonium uptake in macroalgae from a coral atoll

    Digital Repository Service at National Institute of Oceanography (India)

    Raikar, V.; Wafar, M.V.M.

    (Phaeophyta)) from Kavaratti atoll (Lakshadweep, India). Addition of ammonium (up to 20 mmol L-1) led to pronounced uptake within 4–6 min, with the amount of ammonium taken up during surge phase (<4 min) accounting for from about half to 10 times that taken up...

  19. Racer (Ammonium Nonanoate) weed control evaluation for onions

    Science.gov (United States)

    Racer has been labeled as a herbicide for food use and is currently under consideration as an organic herbicide for organically grown food crops. The main component (40%) of Racer is ammonium nonanoate (ammonium pelargonate), which occurs in nature and primarily formed from biodegradation of higher...

  20. Thermal decomposition of ammonium perchlorate during gamma-ray irradiation

    International Nuclear Information System (INIS)

    To assess radiation damage effects in propellants, pyrotechnics, and similar materials, thermal decomposition measurements were made on ammonium perchlorate powders and crystals during gamma-ray irradiation. Gas evolution studies were made on single crystals and powders of ammonium perchlorate, both at room temperature and at 2270C. The results are discussed. (U.S.)

  1. Hydrothermal oxidation of organic wastes using reclaimed ammonium nitrate

    Energy Technology Data Exchange (ETDEWEB)

    Proesmans, P.I.; Luan, L.; Buelow, S.J.

    1996-04-01

    Ammonium nitrate is being studied as an alternative for ammonium perchlorate as an oxidizing agent in Department of Defense 1.1 and 1.3 rocket propellants. Use of ammonium nitrate would eliminate the HCl produced by ammonium perchlorate upon thermal decomposition. To stabilize the ammonium nitrate, which suffers from phase instability, potassium dinitramide (KDN) is added. This increased use of ammonium nitrate will ultimately create a need for environmentally responsible processes to reuse ammonium nitrate extracted from demilitarized rocket motors. Ammonium Nitrate was investigated as an oxidizing agent for methanol, acetic acid and phenol. High removal of organic, ammonia and nitrate was achieved at stoichiometric concentrations. The oxidation of ammonia by nitrate was much faster than the oxidation of either methanol or acetic acid. Phenol, however, was in strong competition with ammonia for the oxidizer (nitrate). Nitrogen products included N{sub 2}, N{sub 2}O, NO{sub 2{sup {minus}}} as well as toxic NO and trace amounts of NO{sub 2}. Carbon products were CO{sub 2}, HCO{sub 3{sup {minus}}}, CO{sub 3}{sup 2{minus}}, and CO.

  2. How to make a living from anaerobic ammonium oxidation

    NARCIS (Netherlands)

    Kartal, B.; De Almeida, N.M.; Maalcke, W.J.; Op den Camp, H.J.M.; Jetten, M.S.M.; Keltjens, J.T.

    2013-01-01

    Anaerobic ammonium-oxidizing (anammox) bacteria primarily grow by the oxidation of ammonium coupled to nitrite reduction, using CO2 as the sole carbon source. Although they were neglected for a long time, anammox bacteria are encountered in an enormous species (micro)diversity in virtually any anoxi

  3. Studies on acetone powder and purified rhus laccase immobilized on zirconium chloride for oxidation of phenols.

    Science.gov (United States)

    Lu, Rong; Miyakoshi, Tetsuo

    2012-01-01

    Rhus laccase was isolated and purified from acetone powder obtained from the exudates of Chinese lacquer trees (Rhus vernicifera) from the Jianshi region, Hubei province of China. There are two blue bands appearing on CM-sephadex C-50 chromatography column, and each band corresponding to Rhus laccase 1 and 2, the former being the major constituent, and each had an average molecular weight of approximately 110 kDa. The purified and crude Rhus laccases were immobilized on zirconium chloride in ammonium chloride solution, and the kinetic properties of free and immobilized Rhus laccase, such as activity, molecular weight, optimum pH, and thermostability, were examined. In addition, the behaviors on catalytic oxidation of phenols also were conducted. PMID:22545205

  4. Sorption method for scandium (3) chloride purification from zirconium (4) impurity

    International Nuclear Information System (INIS)

    Kinetics of Zr4+ sorption on cationite KRF-20t-60 in H-form containing phosphonic functional groups from ScCl3 solution under dynamic conditions was studied for scandium (3) chloride purification from zirconium (4) impurity. It is shown that at initial concentration of scandium chloride in solution equal to 3 g/l and zirconium impurity concentration of about 3 mg/l, sorption column height to diameter ratio equal to 10:1 and solution flow rate 0.4 ml/min · cm2, the method mentioned provides purification factor of about 50. Variants of the sorbent regeneration using 5% solution of ammonium fluoride or 10% solution of potassium carbonate at room temperature were proposed

  5. Crystal structure of tetraethylammonium chloride 3,4,5,6-tetrafluoro-1,2-diiodobenzene

    OpenAIRE

    Jasmine Viger-Gravel; Ilia Korobkov; Bryce, David L.

    2015-01-01

    Equimolar quantities of tetraethylammonium chloride (Et4NCl) and 3,4,5,6-tetrafluoro-1,2-diiodobenzene (o-DITFB or o-C6F4I2) have been co-crystallized in a solution of dichloromethane yielding a pure halogen-bonded compound, 3,4,5,6-tetrafluoro-1,2-diiodobenzene–tetraethyl ammonium chloride (2/1), Et4N+·Cl−·2C6F4I2, in the form of translucent needles. [(Et4NCl)(o-C6F4I2)2] packs in the C2/c space group. The asymmetric unit includes one molecule of DITFB, one Et4N+ cation located on a twofold ...

  6. Evaluation of bishexadecyltrimethyl ammonium palladium tetrachloride based dual functional colloidal carrier as an antimicrobial and anticancer agent.

    Science.gov (United States)

    Kaur, Gurpreet; Kumar, Sandeep; Dilbaghi, Neeraj; Kaur, Baljinder; Kant, Ravi; Guru, Santosh Kumar; Bhushan, Shashi; Jaglan, Sundeep

    2016-04-12

    We have developed a dual function carrier using bishexadecyltrimethyl ammonium palladium tetrachloride, which has anticancer as well as antibacterial activity, using a ligand insertion method with a simple and easy work procedure. The complex is prepared by a simple and cost effective method using hexadecyltrimethyl ammonium chloride and palladium chloride under controlled stoichiometry. Herein, we report the aggregation (self assembly) of the metallosurfactant having palladium as a counter ion, in aqueous medium along with its binding affinity with bovine serum albumin. The palladium surfactant has exhibited excellent antimicrobial efficacy against fungus and bacteria (both Gram-positive and Gram-negative bacteria). Cytotoxicity of palladium surfactant against cancerous (Human leukemia HL-60, pancreatic MIA-Pa-Ca-2 and prostate cancer PC-3) and healthy cells (fR2 human breast epithelial cells) was also evaluated using MTT assay. The present dual functional moiety shows a low IC50 value and has potential to be used as an anticancer agent. Our dual function carrier which itself possesses antimicrobial and anticancer activity represents a simple and effective system and can also be utilized as a drug carrier in the future. PMID:26961498

  7. Neutron diffraction study of aluminum chloride imidazolium chloride molten salts

    Energy Technology Data Exchange (ETDEWEB)

    Takahashi, S. [Nisshin Steel Co. Ltd., Tokyo (Japan); Saboungi, M.L.; Suzuya, K. [Argonne National Lab., IL (United States); Koura, N. [Tokyo University of Science, Tokyo (Japan). Faculty of Science and Technology

    1994-02-01

    The structure of molten mixtures of (AlCl{sub 3}){sub x}(1-ethyl-3-methylimidazolium chloride){sub 1-x} was investigated by neutron diffraction techniques for x=0.46, 0.50, 0.60 and 0.67. Results derived from earlier ab initio molecular orbital (6-31G* basis set) computations for AlCl{sub 4}{sup {minus}}, Al{sub 2}Cl{sub 7}{sup {minus}}, and EMI{sup +} were used to calculate the diffraction patterns; the calculated contributions of each species are thus obtained and overall results are in good agreement with measurements.

  8. Crystal structure of tetraethylammonium chloride 3,4,5,6-tetrafluoro-1,2-diiodobenzene

    Directory of Open Access Journals (Sweden)

    Jasmine Viger-Gravel

    2015-05-01

    Full Text Available Equimolar quantities of tetraethylammonium chloride (Et4NCl and 3,4,5,6-tetrafluoro-1,2-diiodobenzene (o-DITFB or o-C6F4I2 have been co-crystallized in a solution of dichloromethane yielding a pure halogen-bonded compound, 3,4,5,6-tetrafluoro-1,2-diiodobenzene–tetraethyl ammonium chloride (2/1, Et4N+·Cl−·2C6F4I2, in the form of translucent needles. [(Et4NCl(o-C6F4I22] packs in the C2/c space group. The asymmetric unit includes one molecule of DITFB, one Et4N+ cation located on a twofold rotation axis, and one chloride anion also located on a twofold rotation symmetry axis. This compound has an interesting halogen-bonding environment surrounding the halide. Here, the chloride anion acts as a tetradentate halogen bond acceptor and forms a distorted square-pyramidal geometry, with I...Cl−...I angles of 80.891 (6 and 78.811 (11°, where two crystallographically distinct iodine atoms form halogen bonds with the chloride anion. Resulting from that square-pyramidal geometry are short contacts between some of the adjacent F atoms. Along the b axis, the halogen-bonding interaction results in a polymeric network, producing a sheet in which the two closest chloride ions are 7.8931 (6 Å apart. The Et4N+ cation alternates in columns with the halide ion. The expected short contacts (shorter than the sum of their van der Waals radii are observed for the halogen bonds [3.2191 (2 and 3.2968 (2 Å], as well as almost linear angles [170.953 (6 and 173.529 (6°].

  9. Electrodialysis of Pu-contaminated ammonium nitrate solution

    International Nuclear Information System (INIS)

    Ammonium nitrate is the major component of Pu-contaminated liquid waste generated at the Pu-fuel facilities, and its safe decomposition was experimented by the method of electrodialysis. The process consists of two steps. The one is the electrodialysis of ammonium nitrate to ammonium nitrite in aqueous solution, and the other is the thermal decomposition of the ammonium nitrite to water and nitrogen gas also in aqueous solution. A thermal decomposition column and a heat exchanger were used for the continuous decomposition experiments. The membrane was a cation exchange membrane, the anolyte was 0.1 - 0.5 mol nitric acid, the catholyte was 10 - 50 weight % ammonium nitrate, and the current density was 10 - 50 amp/dm2. The experimental results of the pH and temperature effects on the current efficiency show that electrodialysis is preferable in alkaline region and at lower temperature. It is important to control such minor reactions as ammonium hydroxide byproduction as little as possible. The minor reaction of nitrogen gas generation greatly reduces the current efficiency of ammonium nitrite production. The best current efficiency achieved in the experiments was 85% by selecting the best operating conditions. In order to achieve high current efficiency in electrodialysis, the selection of electrolyzer composition, anode, cation exchange membrane, etc. is indispensable. It is generally preferable to choose the metal which has high hydrogen overvoltage to achieve high current efficiency by controlling hydrogen gas generation. (Wakatsuki, Y.)

  10. Synthesis of Zirconium Lower Chlorides

    International Nuclear Information System (INIS)

    This research is accurately related to the Halox concept of research reactor spent fuel element treatment.The aim of this project is to work the conditioning through selected chlorination of the element that make the spent fuel element. This research studied the physical chemistry conditions which produce formation of the lower zirconium chlorides through the reaction between metallic Zr and gaseous ZrCl4 in a silica reactor.This work focused special attention in the analysis and confrontation of the published results among the different authors in order to reveal coincidences and contradictions.Experimental section consisted in a set of synthesis with different reaction conditions and reactor design. After reaction were analyzed the products on Zr shavings and the deposit growth on wall reactor.The products were strongly dependent of reactor design. It was observed that as the distance between Zr and wall reactor increased greater was tendency to lower chlorides formation.In reactors with small distance the reaction follows other way without formation of lower chlorides.Analysis on deposit growth on reactor showed that may be formed to a mixture of SixZry intermetallics and zirconium oxides.Presence of oxygen in Zr and Zr-Si compounds on wall reactor reveals that there is an interaction between quartz and reactants.This interaction is in gaseous phase because contamination is observed in experiences where Zr was not in contact with reactor.Finally, it was made a global analysis of all experiences and a possible mechanism that interprets reaction ways is proposed

  11. Correlation of anaerobic ammonium oxidation and denitrification

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The feasibility of the nitrous organic wastewater treated was studied in seven anaerobic sequencing batch reactors(ASBRs)(0 #-6 #) which had been run under stable anaerobic ammonium oxidation (Anammox). By means of monitoring and data analysis of COD, NH4+-N, NO2--N, NO3--N and pH, and of microbial test, the results revealed that the optimal Anammox performance was achieved from 2# reactor in which COD/NH4+-N was 1.65, Anammox bacteria and denitrification bacteria could coexist, and Anammox reaction and denitrification reaction could occur simultaneously in the reactors. The ratio of NH4+-N consumed: NO2--N consumed: NO3--N produced was 1:1.38:0.19 in 0# reactor which was not added glucose in the wastewater. When different ratio of COD and NH4+-N was fed for the reactors, the ratio of NO2--N consumed: NH4+-N consumed was in the range of 1.51-2.29 and the ratio of NO3-N produced: NH4+-N consumed in the range of 0-0.05.

  12. Modelling an Ammonium Transporter with SCLS

    Directory of Open Access Journals (Sweden)

    Angelo Troina

    2009-10-01

    Full Text Available The Stochastic Calculus of Looping Sequences (SCLS is a recently proposed modelling language for the representation and simulation of biological systems behaviour. It has been designed with the aim of combining the simplicity of notation of rewrite systems with the advantage of compositionality. It also allows a rather simple and accurate description of biological membranes and their interactions with the environment.In this work we apply SCLS to model a newly discovered ammonium transporter. This transporter is believed to play a fundamental role for plant mineral acquisition, which takes place in the arbuscular mycorrhiza, the most wide-spread plant-fungus symbiosis on earth. Due to its potential application in agriculture this kind of symbiosis is one of the main focuses of the BioBITs project. In our experiments the passage of NH3 / NH4+ from the fungus to the plant has been dissected in known and hypothetical mechanisms; with the model so far we have been able to simulate the behaviour of the system under different conditions. Our simulations confirmed some of the latest experimental results about the LjAMT2;2 transporter. The initial simulation results of the modelling of the symbiosis process are promising and indicate new directions for biological investigations.

  13. Effect of Ammonium Nitrate on Nanoparticle Size Reduction

    Directory of Open Access Journals (Sweden)

    Kalyana C. Pingali

    2008-01-01

    Full Text Available Ammonium nitrate was added to the spraying solution as a foaming agent to reduce the particle size of nanoparticles synthesized in the spray-pyrolysis process. Ammonium nitrate was effective in breaking the aerosol droplet size and generating nanoparticles that were of approximately one order-of-magnitude (from 200 to 20 nm smaller diameter than those created in the absence of ammonium nitrate in the feed solution. This technique makes it possible to control the particle diameter of metallic nanoparticles below 20 nm.

  14. Cooper hydrometallurgy and extraction from chloride media

    International Nuclear Information System (INIS)

    The development of copper hydrometallurgy is presented and various processes proposed for copper recovery from sulphide concentrates are discussed. Leaching, extraction and stripping are considered, including reagents and processes. The extraction of copper from chloride solutions is discussed. Various extractants are presented and their use for copper transfer from chloride solutions to the organic phase and back to chloride and to sulphate solutions is discussed. (author) 4 refs

  15. Dechlorinating reaction of organic chlorides

    International Nuclear Information System (INIS)

    Dechlorination has been examined by the reaction between iron, aluminum powder or CaO and organic chlorides such as C2HCl3 and CH2Cl2. Progress of the reaction was analyzed with mass spectrometer. The reaction between iron and organic chloride was rapidly occurred at the temperature between 350 and 440degC in an atmosphere of argon. Above 380degC, more than 99.5% of C2HCl3 was decomposed within approximately 100 minutes. At 440degC, approximately 60% of C2HCl3 was decomposed by the reaction with aluminium powder within approximately 100 minutes. At 440degC, reaction between C2HCl3 and CaO powder were occurred rapidly in an atmosphere of argon to form CaCl2 and free carbon. Also in an atmosphere of air, nearly the same result was obtained. In this reaction, CaCl2, CO and CO2 were formed. CH2Cl2 was also decomposed by the reaction with iron at the temperature between 380 and 440degC. In the reaction, FeCl2, carbon and hydrogen were formed. CH3+ and CH4 were observed during the dechlorinating reaction of CH2Cl2. Variation in particle size of iron powder such as 100, 150 and 250 mesh did not affect the reaction rate. (author)

  16. Method of processing chloride waste

    International Nuclear Information System (INIS)

    In a method of applying molten salt electrolysis to chloride wastes discharged from a electrolytic refining step of a dry reprocessing step for spent fuels, and removed with transuranium elements of long half-decaying time, metals capable of alloying with alkali and alkaline earth metals under melting by electrolysis are used as a cathode material, and an electrolytic temperature is made higher than the melting point of salts in a molten salt electrolysis bath, to recover Li, Ca and Na as alloys with the cathode material in a first electrolysis step. Then, the electrolytic temperature is made higher than the melting point of the chloride salts remained in the bath after the electrolysis step described above by using the cathode material, to recover Ba, Rb, Sr and Cs of nuclear fission products also as alloys with the cathode material in a second electrolysis step. Accordingly, the amount of wastes formed can be reduced, and the wastes contain no heat generating nuclear fission elements. (T.M.)

  17. Green process to recover magnesium chloride from residue solution of potassium chloride production plant

    Institute of Scientific and Technical Information of China (English)

    Lin WANG; Yunliang HE; Yanfei WANG; Ying BAO; Jingkang WANG

    2008-01-01

    The green process to recover magnesium chlor-ide from the residue solution of a potassium chloride pro-duction plant, which comes from the leach solution of a potash mine in Laos, is designed and optimized. The res-idue solution contains magnesium chloride above 25 wt-%, potassium chloride and sodium chloride together below 5 wt-% and a few other ions such as Br-, SO2-4and Ca2+. The recovery process contains two steps: the previous impurity removal operation and the two-stage evapora-tion-cooling crystallization procedure to produce magnes-ium chloride. The crystallized impurity carnallite obtained from the first step is recycled to the potassium chloride plant to recover the potassium salt. The developed process is a zero discharge one and thus fulfills the requirements for green chemical industrial production. The produced magnesium chloride is up to industrial criteria.

  18. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    OpenAIRE

    H. Guan; Love, A. J.; C. T. Simmons; Makhnin, O.; A. S. Kayaalp

    2010-01-01

    Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB) method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this study is to construc...

  19. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    OpenAIRE

    H. Guan; Love, A. J.; C. T. Simmons; Makhnin, O.; A. S. Kayaalp

    2010-01-01

    Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB) method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this st...

  20. Ammonium removal by modified zeolite from municipal wastewater

    Institute of Scientific and Technical Information of China (English)

    ZHAO Ya-ping; GAO Ting-yao; JIANG Shang-ying; CAO Da-wen

    2004-01-01

    Ammonium removal by modified zeolite, H-form and Na-form zeolite, were examined by batch-type methods. The adsorption of ammonium on modified zeolite was exothermic process. The saturation adsorption capacity of ammonium on H-form and Na-form zeolite were 21.23 and 41.15 mg/g, respectively. After ten times adsorption- desorption-readsorption cycles the standard deviations of H-form and Na-form zeolite were 6.34% and 6.59%. The zeolite adsorption process has proved cost effective and practical in reducing ammonium by H-form and Na-form zeolite in municipal wastewater from concentration 27.68 mg/L to 2.80 mg/L and 5.91 mg/L.

  1. Fixed Ammonium Content and Maximum Capacity of Ammonium Fixation in Major Types of Tillage Soils in Hunan Province, China

    Institute of Scientific and Technical Information of China (English)

    ZHANG Yang-zhu; HUANG Shun-hong; WAN Da-juan; HUANG Yun-xiang; ZHOU Wei-jun; ZOU Ying-bin

    2007-01-01

    In order to understand the status of fixed ammonium, fixed ammonium content, maximum capacity of ammonium fixation, and their influencing factors in major types of tillage soils of Hunan Province, China, were studied with sampling on fields, and laboratory incubation and determination. The main results are summarized as follows: (1) Content of fixed ammonium in the tested soils varies greatly with soil use pattern and the nature of parent material. For the paddy soils, it ranges from 135.4 ± 57.4 to 412.8±32.4 mg kg-1, with 304.7±96.7 mg kg-1 in average; while it ranges from 59.4 to 435.7 mg kg-1, with 230.1 ± 89.2 mg kg1 in average for the upland soils. The soils developed from limnic material and slate had higher fixed ammonium content than the soils developed from granite. The percentage of fixed ammonium to total N in the upland soils is always higher than that in the paddy soils. It ranges from 6.1 ± 3.6% to 16.6 ±4.6%, with 14.0% ± 5.1% in average for the paddy soils and it amounted to 5.8 ±2.0% to 40.1 ± 17.8%, with 23.5 ± 14.2% in average for upland soils. (2) The maximum capacity of ammonium fixation has the same trend with the fixed ammonium content in the tested soils. For all the tested soils, the percentage of recently fixed ammonium to maximum capacity of ammonium fixation is always bellow 20% and it may be due to the fact that the soils have high fertility and high saturation of ammonium-fixing site. (3) The clay content and clay composition in the tested soils are the two important factors influe ncing their fixed ammonium content and maximum capacity of ammonium fixation. The results showed that hydrous mica is the main 2:1 type clay mineral in <0.02 mm clay of the paddy soils, and its content in 0.02-0.002 mm clay is much higher than that in < 0.002 mm clay of the soils. The statistical analysis showed that both the fixed ammonium content and the maximum capacity of ammonium fixation of the paddy soils were positively correlated with

  2. Stoichiometric analysis of ammonium nitrate and ammonium perchlorate with nanosecond laser induced breakdown spectroscopy

    Science.gov (United States)

    Sreedhar, S.; Rao, S. Venugopal; Kiran, P. Prem; Tewari, Surya P.; Kumar, G. Manoj

    2010-04-01

    We present our results on the stoichiometric analysis of ammonium nitrate (AN) and ammonium Perchlorate (AP) studied using laser induced breakdown spectroscopy (LIBS) with nanosecond pulses. The LIBS spectra collected for AP and AN, without any gating and using a high resolution spectrometer, exhibited characteristic lines corresponding to O, N, H, C, and K. The Oxygen line at 777.38 nm and three Nitrogen lines (N1, N2, N3) at 742.54 nm, 744.64 nm, 747.12 nm were used for evaluating the Oxygen/Nitrogen ratios. The intensities were calculated using area under the peaks and normalized to their respective transition probabilities and statistical weights. The O/N1 ratios estimated from the LIBS spectra were ~4.94 and ~5.11 for AP and O/N3 ratios were ~1.64 and ~1.47 for AN obtained from two independent measurements. The intensity ratios show good agreement with the actual stoichiometric ratios - four for AP and one for AN.

  3. Subsurface ammonium maxima in northern Bay of Bengal

    Digital Repository Service at National Institute of Oceanography (India)

    Satyanarayana, D.; Sahu, S.D.; Panigrahy, P.K.; Sarma, V.V.; Suguna, C.

    Environmental Research 31 (1991) 123-136 Subsurface Ammonium Maxima in Northern Bay of Bengal D. Satyanarayana, S. D. Sahu, P. K. Panigrahy School of Chemistry, Andhra University, Visakhapatnam 530 003, India V. V. Sarma & C. Suguna National Institute.... Inorganic phosphate was determined by the method of Murphy & Riley (1962), nitrite by the method of Bendschneider & Robinson (1952) and nitrate by the method of Morris & Riley (1963) as modified by Grasshoff (1964). Ammonium was determined by indophenol...

  4. Preferential dissolution behavior of copper-nickel alloys in neutral ammonium acetate solution; Chusei sakusan ammonium yoekichu ni okeru Cu-Ni gokin no yusen yokai kyodo

    Energy Technology Data Exchange (ETDEWEB)

    Nishimura, R.; Yamakawa, K. [Osaka Univ. (Japan). Faculty of Engineering

    1997-11-15

    The electrochemical behaviors of copper alloys which show corrosion resistance under ocean circumstances were investigated in acid, neutral chlorides and a sulfate solution from the view point of preferential dissolution like dezincification corrosion. In this study, dissolved ion seeds of copper-nickel (10 to 42%) alloys in a neutral ammonium acetate solution are analyzed by the method of multi-elements simultaneous analysis using an ICP spectrophotometer, the preferential dissolution behavior of the copper-nickel alloys was studied through film formation analyzed by an AES (Auger Electron Spectroscope) and an anode oxidation current decrease with the increase of the Ni content, In regard to the contents of the dissolved ion seeds, the preferential dissolution of the Ni occurs independent from the Ni content in the active region, but in the passive region, only Cu-10%Ni alloy shows the Ni preferential dissolution in the low voltage side and shows the Cu preferential dissolution in the high voltage side. However, while the Ni content increase more, the Ni preferential dissolution occurs not depending on the voltage. 18 refs., 10 figs., 2 tabs.

  5. Mutagenicity of quaternary ammonium salts containing carbohydrate moieties

    International Nuclear Information System (INIS)

    Highlights: → A series of quaternary ammonium salts containing carbohydrate moieties, with configuration D-galacto, D-gluco and D-manno, was synthesized and characterized. → The quaternary ammonium salts containing carbohydrate moieties revealed potent mutagenic activities, as assessed by using the Vibrio harveyi bioluminescence mutagenicity test. → The N-[2-(D-glycopyranosyloxy)ethyl]-N,N,N-trimethylaminium salts were of the highest activity in the mutagenicity assay. → We suggest that quaternary ammonium salts may be more hazardous than previously supposed. - Abstract: Quaternary ammonium salts are widely used in industrial, agricultural, healthcare and domestic applications. They are believed to be safe compounds, with little or no health hazard to humans. However, in this report, we demonstrate that a series of newly synthesized quaternary ammonium salts containing carbohydrate moieties reveal potent mutagenic activities, as assessed by using the Vibrio harveyi bioluminescence mutagenicity test. D-Gluco- and D-galacto-derivatives were found to have a higher mutagenic potential than D-manno-derivatives. Among the former groups of compounds, the N-[2-(D-glycopyranosyloxy)ethyl]-N,N,N-trimethylaminium salts were of the highest activity in the mutagenicity assay. These results suggest that the safety of quaternary ammonium salts may be lower than previously supposed, indicating a need for testing such compounds for their mutagenicity.

  6. Mutagenicity of quaternary ammonium salts containing carbohydrate moieties

    Energy Technology Data Exchange (ETDEWEB)

    Dmochowska, Barbara [Department of Carbohydrate Chemistry, University of Gdansk, Sobieskiego 18, 80-952 Gdansk (Poland); Piosik, Jacek; Woziwodzka, Anna [Intercollegiate Faculty of Biotechnology, University of Gdansk and Medical University of Gdansk, Kladki 24, 80-822 Gdansk (Poland); Sikora, Karol; Wisniewski, Andrzej [Department of Carbohydrate Chemistry, University of Gdansk, Sobieskiego 18, 80-952 Gdansk (Poland); Wegrzyn, Grzegorz, E-mail: wegrzyn@biotech.univ.gda.pl [Department of Molecular Biology, University of Gdansk, Kladki 24, 80-822 Gdansk (Poland)

    2011-10-15

    Highlights: {yields} A series of quaternary ammonium salts containing carbohydrate moieties, with configuration D-galacto, D-gluco and D-manno, was synthesized and characterized. {yields} The quaternary ammonium salts containing carbohydrate moieties revealed potent mutagenic activities, as assessed by using the Vibrio harveyi bioluminescence mutagenicity test. {yields} The N-[2-(D-glycopyranosyloxy)ethyl]-N,N,N-trimethylaminium salts were of the highest activity in the mutagenicity assay. {yields} We suggest that quaternary ammonium salts may be more hazardous than previously supposed. - Abstract: Quaternary ammonium salts are widely used in industrial, agricultural, healthcare and domestic applications. They are believed to be safe compounds, with little or no health hazard to humans. However, in this report, we demonstrate that a series of newly synthesized quaternary ammonium salts containing carbohydrate moieties reveal potent mutagenic activities, as assessed by using the Vibrio harveyi bioluminescence mutagenicity test. D-Gluco- and D-galacto-derivatives were found to have a higher mutagenic potential than D-manno-derivatives. Among the former groups of compounds, the N-[2-(D-glycopyranosyloxy)ethyl]-N,N,N-trimethylaminium salts were of the highest activity in the mutagenicity assay. These results suggest that the safety of quaternary ammonium salts may be lower than previously supposed, indicating a need for testing such compounds for their mutagenicity.

  7. New synthetic method and properties of ammonium dinitramide; Ammonium dinitramide no shingoseiho to sono butsuri kagakuteki tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Hatano, H.; Onda, T.; Shiino, K. [Hosoya Kako Co. Ltd., Tokyo (Japan). Technology and Development Center; Miyazaki, S.; Matsuura, S. [Nissan Motor Co. Ltd., Saitama (Japan). Research and Development center

    1996-08-31

    Though, ammonium nitrate (AN) has been thought as solid propellant oxidizer, at present, ammonium perchlorate (AP) is mainly used because of the existence of crystal transition point, the improvement of propellant performance on AN and so forth. Ammonium dinitramide (ADN) can be used as an excellent oxidizer for high performance solid propellants, because it has much available oxygen. Furthermore, this propellant is smokeless, since ADN has no halogen resulting in generation of smoke on burning. ADN can be obtained by a new synthetic method which uses urea as starting substance and acquires nitrourea as intermediate product. According to this method, the yield is about 15% based on the amount of nitrourea. The hygroscopicity of this ADN is slightly higher than that of ammonium nitrate. Therefore, it is recommended to handle this substance at 50% of relative humidity or below. 13 refs., 7 figs., 4 tabs.

  8. Electrochemical Chloride extraction using external electrodes?

    DEFF Research Database (Denmark)

    Ottosen, Lisbeth M.; Pedersen, Anne Juul

    cathode. However, some unwanted side effects can occur, including alkali-silica reaction and in some cases hydrogen embrittlement. It is also suggested also to use electrochemical chloride extraction in a preventive way in constructions where chloride induced corrosion is likely to be a problem after a...

  9. Chloride binding site of neurotransmitter sodium symporters

    DEFF Research Database (Denmark)

    Kantcheva, Adriana Krassimirova; Quick, Matthias; Shi, Lei;

    2013-01-01

    Neurotransmitter:sodium symporters (NSSs) play a critical role in signaling by reuptake of neurotransmitters. Eukaryotic NSSs are chloride-dependent, whereas prokaryotic NSS homologs like LeuT are chloride-independent but contain an acidic residue (Glu290 in LeuT) at a site where eukaryotic NSSs...

  10. Chloride ingress in cement paste and mortar

    DEFF Research Database (Denmark)

    Jensen, Ole Mejlhede; Hansen, Per Freiesleben; Coats, Alison M.; Glasser, Fred P.

    1999-01-01

    In this paper chloride ingress in cement paste and mortar is followed by electron probe microanalysis. The influence of several paste and exposure parameters on chloride ingress are examined (e.g., water-cement ratio, silica fume addition, exposure time, and temperature), The measurements are...

  11. Chloride ingress in cement paste and mortar

    DEFF Research Database (Denmark)

    Jensen, Ole Mejlhede; Hansen, Per Freiesleben; Coats, Alison M.;

    1999-01-01

    modelled on Fick's law modified by a term for chloride binding. Inclusion of chloride binding significantly improves the profile shape of the modelled ingress profiles. The presence of fine aggregate and formation of interfacial transition zones at paste-aggregate boundaries does not significantly affect...

  12. Reliability-Based Planning of Chloride Measurements

    DEFF Research Database (Denmark)

    Sørensen, John Dalsgaard; Engelund, S.

    1996-01-01

    on measurements of the chloride content obtained from the given structure. In the present paper optimal planning of measurements of the chloride content in reinforced concrete structures is considered. It is shown how optimal experimental plans can be obtained using FORM-analysis. Bayesian statistics...

  13. Properties of silver chloride track detectors

    International Nuclear Information System (INIS)

    The experiments on preparation of silver chloride track detectors and their properties are described. The results of X-ray structural analysis and data on sensitivity to charged particles and actinic light of silver chloride crystals, doped with several elements, are presented. (orig.)

  14. Direct spectorphotometric assay of quaternary ammonium compounds using bromthymol blue.

    Science.gov (United States)

    Lowry, J B

    1979-01-01

    Benzalkonium chloride, benzethonium chloride, and chlorhexidine gluconate were assayed quantitatively by a direct spectrophotometric method with bromthymol blue buffered at pH 7.5. The method shows good results at concentrations of 0--300 microgram/ml and in the presence of epinephrine bitartrate, phenylephrine hydrochloride, pilocarpine hydrochloride, and polyvinyl alcohol. PMID:758444

  15. Diffusion behavior of chloride ions in concrete

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, T.; Gjoerv, O.E. [Norwegian Univ. of Science and Technology, Trondheim (Norway). Div. of Building Materials

    1996-06-01

    In the present paper, an analysis of the diffusion behavior of chloride ions in concrete is presented. In concentrated electrolytic aqueous solutions such as seawater or that typically used in laboratory experiments, the effect of ionic interaction may significantly reduce the chemical potential and thus the driving force of the diffusing species. Because of different drift velocities of the cations and chloride ions in the solution, the lagging motion of the cations will also retard the drift velocity of the chlorides. In addition, both the electrical double layer forming on the solid surface and the chemical binding may significantly interfere with the transport of the chloride ions. As a result, the diffusion behavior of the chloride ions in concrete is a more complex and complicated transport process than what can be described by Fick`s law of diffusion.

  16. Simple chloride sensors for continuous groundwater monitoring

    DEFF Research Database (Denmark)

    Thorn, Paul; Mortensen, John

    2012-01-01

    The development of chloride sensors which can be used for continuous, on-line monitoring of groundwater could be very valuable in the management of our coastal water resources. However, sensor stability, drift, and durability all need to be addressed in order for the sensors to be used in continu......The development of chloride sensors which can be used for continuous, on-line monitoring of groundwater could be very valuable in the management of our coastal water resources. However, sensor stability, drift, and durability all need to be addressed in order for the sensors to be used...... sensor remained responsive even at low chloride concentrations, where the conductivity electrode was no longer responding to changing chloride levels. With the results, it is believed that the simple chloride sensor could be used for continuous monitoring of groundwater quality....

  17. Methods to Stabilize and Destabilize Ammonium Borohydride

    Energy Technology Data Exchange (ETDEWEB)

    Nielsen, Thomas K.; Karkamkar, Abhijeet J.; Bowden, Mark E.; Besenbacher, Fleming; Jensen, Torben R.; Autrey, Thomas

    2013-01-21

    Ammonium borohydride, NH4BH4, has a high hydrogen content of ρm = 24.5 wt% H2 and releases 18 wt% H2 below T = 160 °C. However, the half-life of bulk NH4BH4 at ambient temperatures, ~6 h, is insufficient for practical applications. The decomposition of NH4BH4 (ABH2) was studied at variable hydrogen and argon back pressures to investigate possible pressure mediated stabilization effects. The hydrogen release rate from solid ABH2 at ambient temperatures is reduced by ~16 % upon increasing the hydrogen back pressure from 5 to 54 bar. Similar results were obtained using argon pressure and the observed stabilization may be explained by a positive volume of activation in the transition state leading to hydrogen release. Nanoconfinement in mesoporous silica, MCM-41, was investigated as alternative means to stabilize NH4BH4. However, other factors appear to significantly destabilize NH4BH4 and it rapidly decomposes at ambient temperatures into [(NH3)2BH2][BH4] (DADB) in accordance with the bulk reaction scheme. The hydrogen desorption kinetics from nanoconfined [(NH3)2BH2][BH4] is moderately enhanced as evidenced by a reduction in the DSC decomposition peak temperature of ΔT = -13 °C as compared to the bulk material. Finally, we note a surprising result, storage of DADB at temperature < -30 °C transformed, reversibly, the [(NH3)2BH2][BH4] into a new low temperature polymorph as revealed by both XRD and solid state MAS 11B MAS NMR. TA & AK are thankful for support from the US Department of Energy, Office of Basic Energy Sciences, Division of Chemical Sciences, Geosciences & Biosciences. A portion of the research was performed using EMSL, a national scientific user facility sponsored by the Department of Energy's Office of Biological and Environmental Research and located at Pacific Northwest National Laboratory (PNNL). PNNL is operated by Battelle.

  18. Use of modifiers for the elimination in situ of chlorides, in the analysis by use of Total Reflection X-Ray Fluorescence

    International Nuclear Information System (INIS)

    Full text: The samples with high content of chlorides form deposits of salts on the reflector used for the analysis TXRF, affecting the quality of the thin film required for the analysis, producing an increase of the bed (bottom) and consequently an increase of the detection limit. Joined this, the levels of chlorine present in this type of samples, imply the presence of a peak K alpha of high-intensity, and as a consequence, the spectral interference with the neighboring peaks (lines of potassium K alpha, calcium and L of cadmium and silver, for example). By means of this work it is intended the use of chemical modifiers added in situ, on the sample, in the reflector, which allow the the elimination of chlorides and other salts formed on the reflector. For that reason three modifiers were proved: Ammonium nitrate, ammonium oxalate and oxalic acid in solutions of 10000 ppm. These compounds are added in excess, in a proportion of 50 microliters on an 10 microliters deposit of a pattern sample, with 1% of sodium chloride. The decrease of the the intensity of the pick K alpha of Cl with each one of the modifiers in function of the method of addition of modifier on the sample holders, heating mode and drying of the sample, temperature and drying time. For each case the limits of detection of the elements Ca, K, Se, Cd and Ni were determined. It was found that the more effective modifier is the ammonium nitrate more effective

  19. Membrane chloride transport measured using a chloride-sensitive fluorescent probe

    International Nuclear Information System (INIS)

    Transport of chloride across cell membranes through exchange, cotransport, or conductive pathways is a subject of great biological importance. Current methods of measurement are restricted in their sensitivity, time resolution, and applicability. A new transport measurement technique has been developed on the basis of the fluorescence quenching by chloride of the dye 6-methoxy-N-(3-sulfopropyl)quinolinium (SPQ). SPQ fluorescence quenching by chloride is rapid and sensitive, with a greater than 50% decrease in fluorescence at 10 mM chloride. SPQ fluorescence is not altered by other physiological anions or by pH and can be used to measure both neutral and conductive transport processes. The high water solubility and membrane permeability properties of SPQ make it ideal for use in both membrane vesicles and cells. Chloride transport determined with SPQ was validated by measurement of erythrocyte chloride/anion exchange and membrane vesicle chloride conductance using 35SO4 uptake

  20. CHARACTERISTICS OF QUATERNARY AMMONIUM RESISTANT BACTERIA FROM A FINE PAPERMACHINE SYS-TEM

    Institute of Scientific and Technical Information of China (English)

    HweigWang; ChiYuHuang; ChunHanKo

    2004-01-01

    To evaluate the biocide effect of quaternary ammonium chloride (QAC), a whitewater sample wastaken from a fine papermachine headbox. By platespreading method, 51 strains of facultative anaerobewere isolated morphologically. Then the strains wereseparately transferred to basal medium and were incubated before the beginning of log phase. To identify strains with different QAC resistance, 30-120 ppmof N-Alkyl-benzyl-dimethyl ammonium chloridewere added to basal medium.Biocide effect was investigated by comparison of bacterial growth, whichcan be monitored by 600 nm light absorbance ofbasal medium suspension. Among 51 strains, only 2strains can Survive for QAC concentration up to 120ppm. API20E aud 16S rRNA gene sequencing technique were applied to identify two strains with highest (120 ppm)QAC resistance. One strain (HB22)was identified as Morganella morganii. HB22 can resist QAC concentration up to 150 ppm. HB22 isGram-negative rod, motile with flagella, catalasepositive, oxidase negative, Indole positive, H2S production negative, facultative anaerobe. HB22 has op-timum growth condition of 35C and pH 7.0.HB22can catabolize only glucose and D (+)-Mannose.The other (HB45) was identified with high similarityamong Pseudomonas cf. monteili or Pseudomonas mosselii or Pseudomonas putida. HB45can resist QAC concentration up to 200 ppm.HB45 is Gram-negative rod, motile with flagella,catalase positive, oxidase negative, Indole negative,H2S production negative, aerobe. HB45 has optimum growth condition of 30~C and pH 7.4. HB45can catabolize L-Arabinose, L (+)-Rhanmose, D(+)-Mannose, Glucose, Glycerol, Lactose, Maltose,Raffmose, Xylose, Cellulose and Xylan. The implication of this work to paper industry is also discussed.

  1. Hygroscopic and phase separation properties of ammonium sulfate/organic/water ternary solutions

    Directory of Open Access Journals (Sweden)

    M. A. Zawadowicz

    2015-03-01

    Full Text Available Atmospheric aerosol particles are often partially or completely composed of inorganic salts, such as ammonium sulfate and sodium chloride, and therefore exhibit hygroscopic properties. Many inorganic salts have well-defined deliquescence and efflorescence points at which they take up and lose water, respectively. Deliquescence and efflorescence of simple inorganic salt particles have been investigated by a variety of methods, such as IR spectroscopy, tandem mobility analysis and electrodynamic balance. Field measurements have shown that atmospheric aerosols are not typically pure inorganic salt, instead they often also contain organic species. There is ample evidence from laboratory studies that suggests that mixed particles exist in a phase-separated state, with an aqueous inorganic core and organic shell. Although phase separation has not been measured in situ, there is no reason it would not also take place in the atmosphere. Many recent studies have focused on microscopy techniques that require deposition of the aerosol on a glass slide, possibly changing its surface properties. Here, we investigate the deliquescence and efflorescence points, phase separation and ability to exchange gas-phase components of mixed organic and inorganic aerosol using a flow tube coupled with FTIR spectroscopy. Ammonium sulfate aerosol mixed with organic polyols with different O : C ratios, including 1,4-butanediol, glycerol, 1,2,6-hexanetriol, 1,2-hexanediol, and 1,5-pentanediol have been investigated. Those constituents correspond to materials found in the atmosphere in great abundance, and therefore, particles prepared in this study should mimic atmospheric mixed phase aerosol particles. The results of this study tend to be in agreement with previous microscopy experiments, with several key differences, which possibly reveal a size-dependent effect on phase separation in organic/inorganic aerosol particles.

  2. Early metabolic effects and mechanism of ammonium transport in yeast

    International Nuclear Information System (INIS)

    Studies were performed to define the effects and mechanism of NH+4 transport in yeast. The following results were obtained. Glucose was a better facilitator than ethanol-H2O2 for ammonium transport; low concentrations of uncouplers or respiratory inhibitors could inhibit the transport with ethanol as the substrate. With glucose, respiratory inhibitors showed only small inhibitory effects, and only high concentrations of azide or trifluoromethoxy carbonylcyanide phenylhydrazone could inhibit ammonium transport. Ammonium in the free state could be concentrated approximately 200-fold by the cells. Also, the addition of ammonium produced stimulation of both respiration and fermentation; an increased rate of H+ extrusion and an alkalinization of the interior of the cell; a decrease of the membrane potential, as monitored by fluorescent cyanine; an immediate decrease of the levels of ATP and an increase of ADP, which may account for the stimulation of both fermentation and respiration; and an increase of the levels of inorganic phosphate. Ammonium was found to inhibit 86Rb+ transport much less than K+. Also, while K+ produced a competitive type of inhibition, that produced by NH4+ was of the noncompetitive type. From the distribution ratio of ammonium and the pH gradient, an electrochemical potential gradient of around -180 mV was calculated. The results indicate that ammonium is transported in yeast by a mechanism similar to that of monovalent alkaline cations, driven by a membrane potential. The immediate metabolic effects of this cation seem to be due to an increased [H+]ATPase, to which its transport is coupled. However, the carriers seem to be different. The transport system studied in this work was that of low affinity

  3. Synthesis and characterisation of polyelectrolytes based on polymers of diallyldimethyl ammonium chloride and poly(styrene-co-butadiene)

    OpenAIRE

    Svensson, David

    2012-01-01

    In printed electronics there are many polyelectrolytes to choose from. While polyelectrolytes such as polystyrene sulfonic acid can fulfill many ofthe desired functionalities of a semiconductor, there is a need for other polyelectrolytes with other functionalities, such as functionality at low airhumidity and better cross-linking possibilities, while still functioning as a good semiconductor.Within this thesis, there is a description of general polyelectrolytes, as well as various usages.The ...

  4. Effect of ammonium chloride and tunicamycin on the glycoprotein content and infectivity of herpes simplex virus type 1

    Energy Technology Data Exchange (ETDEWEB)

    Kousoulas, K.G.; Bzik, D.J.; DeLuca, N.; Person, S.

    1983-01-01

    Infectious virions of MP, a syncytial strain of herpes simplex virus type 1, are formed in the presence of 50 mM NH/sub 4/Cl. Underglycosylated virion glycoproteins are synthesized in infected cells and are incorporated into virions in the presence of the same concentration of NH/sub 4/Cl. We conclude that fully glycosylated glycoproteins are not required for viral infectivity. Virus particles, deficient in glycosylated glycoproteins, are assembled in the presence of tunicamycin but they are not infectious. The decrease in infectivity could be due to the decreased amount of the gB or possibly other peptides and/or to the lack of the high-mannose saccharides of precursor glycoproteins. 32 references, 4 figures.

  5. The effect of ammonium chloride and tunicamycin on the glycoprotein content and infectivity of herpes simplex virus type 1.

    Science.gov (United States)

    Kousoulas, K G; Bzik, D J; DeLuca, N; Person, S

    1983-03-01

    Infectious virions of MP, a syncytial strain of herpes simplex virus type 1, are formed in the presence of 50 mM NH4Cl. Underglycosylated virion glycoproteins are synthesized in infected cells and are incorporated into virions in the presence of the same concentration of NH4Cl. We conclude that fully glycosylated glycoproteins are not required for viral infectivity. Virus particles, deficient in glycosylated glycoproteins, are assembled in the presence of tunicamycin but they are not infectious. The decrease in infectivity could be due to the decreased amount of the gB or possibly other peptides and/or to the lack of the high-mannose saccharides of precursor glycoproteins. PMID:6301148

  6. The effect of ammonium chloride concentrationson the content of carotenoid pigments in the body of Lymnaea stagnalis

    Directory of Open Access Journals (Sweden)

    G. E. Kyrychuk

    2015-09-01

    Full Text Available The paper deals with the peculiarities of distribution of β-carotene and xanthophylls in the body of Lymnaea stagnalis (Linnaeus, 1758 (Pulmonata, Lymnaeidae in the normal conditions and under the action of different concentrations of NH4Cl, depending on duration of exposure (2, 7, 14 and 21 days. L. stagnalis (300 copies were collected in September 2013–2014 (in Zhytomyr region. Toxicant NH4Cl was used in concentrations corresponding to 0.5, 2, 5 and 10 MAC. The content of β-carotene and xanthophylls was determined by the Taylor method. 2400 biochemical analyses were carried out. The article shows that under the action of 0.5 MPC NH4Cl adaptive processes are stimulated in the body of L. stagnalis and total antioxidant activity is activated, as evidenced by changes in the content of β-carotene and xanthophylls in the organs (hepatopancreas, pallium and foot and tissues (hemolymph of the mollusks under study. The research proves that the action of concentration discussed above during 2, 14 and 21 days causes the increase in the content of β-carotene in hepatopancreas (1.63–5.73 times, pallium (1.68–5.37 times and foot (1.81–3.89 times of animals. Incubation of mollusks in solutions of NH4Cl (0.5 MAC for 7 days resulted in the decrease of figures in these organs by 23,6–38,8% relatively to control. It should be noted that from the overall dynamics hemolymph is somewhat distracting; for it 1.35–1.46 times’ decrease in the content of β-carotene after short-term action of the toxicant (2 and 7 days and β-carotene increase by 2.79–7.38 times under conditions of prolonged exposure (14 and 21 days is recorded. The content of xanthophylls correlates with the content of β-carotene on the 2nd, 7th and 14th day of toxic action, but by increasing the time of contact with toxic substances to 21 days the decrease in figures by 20,9–40,7% in foot and pallium is recorded. When the toxicant concentration is increased to 2 MAC (with 2 days’ exposition β-carotene content grows 2,08–5.98 times throughout the body of L. stagnalis and xanthophyll content decreases in hepatopancreas, pallium and foot (by 51,8–67,3%. When increasing duration of exposure in solutions of this concentration to 7, 14 and 21 days the decrease is recorded in both parameters studied: β-carotene (by 52.1–73,8% in hepatopancreas, by 31,7–69,0% in pallium, by 56,1–80,6% in foot and xanthophylls (by 44,6–82,6% in hepatopancreas, by 51,6–68,2% in pallium, 75,6–83,8% in foot. Increase in the toxicant concentration to 5 and 10 MAC regardless of the length of the exposure leads to reduction of the content of animals’ β-carotene in hemolymph (by 39,9 – of 92.6% and hepatopancreas (11,2– 95,7%. In the mollusk foot the decrease of figures under action of 5 and 10 MAC of the toxicant during 7, 14 and 21 days (by 33,2–94,8% relative to control irrespective of the exposure duration is recorded. Long stay (14 and 21 days in solutions of the toxicant at the concentration of 5 and 10 MAC causes the reduction of xanthophyll content throughout the body of L. stagnalis. Tissue-specific distribution of β-carotene and xanthophylls in the tissues (organs of L. stagnalis is shown. Hemolymph is characterized by minimum content of investigated pigments, and maximum values vary between organs (tissues depending on the concentration and duration of exposure of animals to the toxic solution.

  7. Chlorobenzene formation from fly ash: effect of moisture, chlorine gas, cupric chloride, urea, ammonia and ammonium sulfate

    NARCIS (Netherlands)

    M. Yan; Z.F. Qi; X.D. Li; T. Chen; S.Y. Lu; A.G. Buekens; K. Olie; J.H. Yan; K. Olie

    2012-01-01

    Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) are formed jointly with numerous products of incomplete combustion during waste incineration. Chlorobenzenes (CBz) are often cited as surrogates or precursors of PCDD/Fs. Experiments were conducted to investigate the effect of some key pa

  8. Bone, blood and faecal response to an acidogenic lick for range cattle using different concentrations of ammonium chloride

    Directory of Open Access Journals (Sweden)

    D.E. Beighle

    2000-07-01

    Full Text Available Thirty Brahman-Angus cross heifers at breeding age on extensive grazing were used to test the effectiveness of NH4Cl as an acidogenic agent at 15, 18, 21 and 26 %of a dicalcium phosphate lick (A+, compared to a lick of 5 parts dicalcium phosphate and 3 parts salt (A-. Blood and faecal phosphorus (P, faecal calcium (Ca and faecal magnesium (Mg were significantly (P < 0.05 higher in A+ compared to A- animals at different stages of the experiment. Bone P did not increase in response to NH4Cl but bone Ca was significantly (P < 0.05 higher in A+animals offered 18 % NH4Cl and significantly (P < 0.05 lower at 15 and 26 %. Bone Mgin A+animals was significantly (P < 0.05 higher at 15 and 18 % NH4Cl and lower at 26 % NH4Cl compared to A- animals. Percentage ash in bone increased linearly from 62.5 to 64.9 % in A+ animals as NH4Cl was increased in the lick from 15 to 21 % and then decreased to 63.3 % but was significantly (P < 0.05 greater than the percentage ash in A- animals when the NH4Cl was increased to 26 %. Bone mineral status was only marginally improved by adding NH4Cl to the lick in this study but blood P was significantly (P < 0.05 improved in A+ compared to A- animals when the lick contained 15, 21 and 26 % NH4Cl. Based on bone mineral results reported here, it is recommended that, when NH4Cl is used as an acidogenic agent in licks for range cattle, the amount in the lick should not exceed 21 %.

  9. Reversible Swelling of Chitosan and Quaternary Ammonium Modified Chitosan Brush Layers: Effect of pH and Counter Anion Size and Functionality

    OpenAIRE

    Lee, Hyun-Su; Yee, Michael Q.; Eckmann, Yonaton Y.; Hickok, Noreen J.; Eckmann, David M.; Composto, Russell J.

    2012-01-01

    This study investigates the swelling of grafted polycationic brushes as a function of pH and anion type. The brushes are chitosan (CH) and chitosans with 27% and 51% degree of substitution (DS) of quaternary ammonium salt, denoted as CH-Q25 and CH-Q50, respectively. The water content and swelling behaviors are monitored using in situ quartz-crystal microbalance with dissipation (QCM-D). The pH varies from ~3.5 to 8.5, and the counter anion types include chloride, acetate, and citrate. At fixe...

  10. Polymer-clay nanocomposites obtained by solution polymerization of vinyl benzyl triammonium chloride in the presence of advanced functionalized clay

    Indian Academy of Sciences (India)

    Raluca Ianchis; Dan Donescu; Ludmila Otilia Cinteza; Violeta Purcar; Cristina Lavinia Nistor; Critian Petcu; Cristian Andi Nicolae; Raluca Gabor; Silviu Preda

    2014-05-01

    Polymer-clay nanocomposites were synthesized by solution polymerization method using advanced functionalized clay and vinyl benzyl trimethyl ammonium chloride as monomer. First stage consisted in the silylation of a commercial organo-modified clay-Cl 20A using alkoxysilanes with different chain lengths. In the second step, the synthesis and characterization of polymer-nanocomposites were followed. To evaluate the clay functionalization process as well as the final polymer-clay products, thermogravimetric,X-ray diffraction, dynamic light scattering, Fourier transform infrared spectroscopy and three test liquid contact angles analyses were used. The loss of ammonium ions from commercial clay, the grafting degree, the lengths and the nature of alkyl chain influence the dispersion of the advanced modified clay into the polymer solution and, furthermore, the properties of the final polymer-clay nanocomposite film.

  11. Chloride Transport in Undersea Concrete Tunnel

    Directory of Open Access Journals (Sweden)

    Yuanzhu Zhang

    2016-01-01

    Full Text Available Based on water penetration in unsaturated concrete of underwater tunnel, a diffusion-advection theoretical model of chloride in undersea concrete tunnel was proposed. The basic parameters including porosity, saturated hydraulic conductivity, chloride diffusion coefficient, initial water saturation, and moisture retention function of concrete specimens with two water-binder ratios were determined through lab-scale experiments. The variation of chloride concentration with pressuring time, location, solution concentration, initial saturation, hydraulic pressure, and water-binder ratio was investigated through chloride transport tests under external water pressure. In addition, the change and distribution of chloride concentration of isothermal horizontal flow were numerically analyzed using TOUGH2 software. The results show that chloride transport in unsaturated concrete under external water pressure is a combined effect of diffusion and advection instead of diffusion. Chloride concentration increased with increasing solution concentration for diffusion and increased with an increase in water pressure and a decrease in initial saturation for advection. The dominant driving force converted with time and saturation. When predicting the service life of undersea concrete tunnel, it is suggested that advection is taken into consideration; otherwise the durability tends to be unsafe.

  12. Shelf life of unrefrigerated succinylcholine chloride injection.

    Science.gov (United States)

    Boehm, J J; Dutton, D M; Poust, R I

    1984-02-01

    The shelf life of succinylcholine chloride injection at several pH values when stored at room temperature was evaluated. Solutions containing 20 mg/ml of succinylcholine chloride were stored at 25 and 40 degrees C. The reaction was studied at pH values ranging from 3.0 to 4.5. At two-week intervals, the solutions were assayed by high-pressure liquid chromatography. The initial amount of succinylcholine chloride in all samples was 100.1 +/- 2.37% of label claim. Hydrolysis of succinylcholine chloride in unbuffered solutions followed apparent zero-order kinetics. The pH range of maximum stability was found to be from 3.75 to 4.50. Succinylcholine chloride decomposed at a considerably higher rate at 40 degrees C. Allowing for the effects of pH adjustment during manufacture and degradation during shipping, losses of 7.0% and 9.0% potency can be expected after storage at 25 degrees C for four and six weeks, respectively. Succinylcholine Chloride Injection, USP, should be stored in the refrigerator; if unbuffered succinylcholine chloride injection complying with USP pH limits must be stored at room temperature, it should not be kept for longer than four weeks. PMID:6702837

  13. Sequential diffusion of ammonium and nitrate from soil extracts to a polytetrafluoroethylene trap for 15N determination

    DEFF Research Database (Denmark)

    Sørensen, P.; Jensen, E.S.

    A novel diffusion method was used for preparation of NH4+- and NO3--N samples from soil extracts for N-15 determination. Ammonium, and nitrate following reduction to ammonia, are allowed to diffuse to an acid-wetted glass filter enclosed in polytetrafluoroethylene tape. The method was evaluated...... with simulated soil extracts obtained using 50 ml of 2 M potassium chloride solution containing 130-mu-g of NH4+-N (2.3 atom% N-15) and 120-mu-g of NO3--N (natural N-15 abundance). No cross-over in the N-15 abundances of NH4+-N and NO3--N was observed, indicating a quantitative diffusion process (72 h......, 25-degrees-C). Owing to the presence of inorganic nitrogen impurities in the potassium chloride, the N-15 enrichments should be corrected for the blank nitrogen content....

  14. Modeling of alkyl quaternary ammonium cations intercalated into montmorillonite lattice

    International Nuclear Information System (INIS)

    Highlights: ► The modification of montmorillonites by three surfactants increases the basal spacing. ► The model proposed show a bilayer conformation for the surfactant ODTMA. ► The DODMA and TOMA surfactants adopt a paraffin type arrangement. ► Behavior of surfactants in interlayer space was confirmed by TGA and ATR analysis. - Abstract: The objective of this work was to study the conformation of the quaternary ammonium cations viz., octadecyl trimethyl ammonium (ODTMA), dioctadecyl dimethyl ammonium (DMDOA) and trioctadecyl methyl ammonium (TOMA) intercalated within montmorillonite. The modified montmorillonite was characterized by X-ray diffraction in small angle (SAXS), thermal analysis (TGA) and infrared spectroscopy of attenuated total reflection (ATR). The modification of organophilic montmorillonites by the three surfactants ODTMA, DMDOA and TOMA increases the basal spacing from their respective intercalated distances of 1.9 nm, 2.6 nm and 3.4 nm respectively. The increase in the spacing due to the basic organic modification was confirmed by the results of thermal analysis (TGA) and infrared spectroscopy (ATR), and also supported by theoretical calculations of longitudinal and transversal chain sizes of these alkyl quaternary ammonium cations

  15. Study of the effect of γ-rays on two quaternary ammonium compounds with antimicrobial activity

    International Nuclear Information System (INIS)

    The present work deals with a study of the effect of γ-rays on the stability of two pharmaceutical relevant long chain quaternary ammonium compounds, benzyldimethyltetradecylammonium chloride (BDMTAC) and 1-hexadecylpyridinium chloride (HPC). The aqueous aerated solutions of BDMTAC and HPC in different concentrations in the range of 0.25-125 mmol/l were subjected to irradiation with 60Co-γ-rays and a dose of 25 kGy. HPC solutions were yellow coloured after irradiation. In both cases the irradiated solutions were analysed with help of TLC, HPLC, GC and compared with the unirradiated samples. In the case of BDMTAC five degradation products and in the case of HPC three degradation products were identified using spectroscopical methods (UV, IR, MS) and by comparing these data as well as the retention times from HPLC and GC with those of reference substances. Reference substances which were not available were synthesized. As a function of the concentration degradation rates from 100 - 13% with G(-)=0.1-6.3 for BDMTAC, and 100 - 12% with G(-)=0.1-5.9 for HPC were determined. The G-values (100 eV yield) and the quantitative yield of the identified radiolysis products were also estimated. By use of some selected radical scavengers (oxygen, nitrogen, dinitrogenmonoxide, tert.-butanol, hydrochloric acid, sodium hydroxide, sodium nitrate), it was tried to protect the substances from degradation by irradiation and to formulate a degradation mechanism of the studied substances. From the scavengers used only sodium nitrate showed a protective effect. Both BDMTAC and HPC were subjected to irradiation with 25 and 50 kGy. The spectroscopic examinations (UV,IR) as well as HPLC showed none or very little degradation. (author) figs., tabs., 93 refs

  16. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    Directory of Open Access Journals (Sweden)

    H. Guan

    2010-05-01

    Full Text Available Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this study is to construct a chloride deposition map in the Mount Lofty Ranges (MLR, a coastal hilly area of approximately 9000 km2 spatial extent in South Australia. We examined geographic (related to coastal distance, orographic, and atmospheric factors that may influence chloride deposition, using partial correlation and regression analyses. The results indicate that coastal distance, elevation, as well as terrain aspect and slope, appear to be significant factors controlling chloride deposition in the study area. Coastal distance accounts for 70% of spatial variability in bulk chloride deposition, with elevation, terrain aspect and slope an additional 15%. The results are incorporated into a de-trended residual kriging model (ASOADeK to produce a 1 km×1 km resolution bulk chloride deposition and concentration maps. The average uncertainty of the deposition map is about 20–30% in the western MLR, and 40–50% in the eastern MLR. The maps will form a useful basis for examining catchment chloride balance for the CMB application in the study area.

  17. Chloride substitution in sodium borohydride

    Science.gov (United States)

    Ravnsbæk, Dorthe B.; Rude, Line H.; Jensen, Torben R.

    2011-07-01

    The dissolution of sodium chloride and sodium borohydride into each other resulting in formation of solid solutions of composition Na(BH 4) 1- xCl x is studied. The dissolution reaction is facilitated by two methods: ball milling or combination of ball milling and annealing at 300 °C for three days of NaBH 4-NaCl samples in molar ratios of 0.5:0.5 and 0.75:0.25. The degree of dissolution is studied by Rietveld refinement of synchrotron radiation powder X-ray diffraction (SR-PXD) data. The results show that dissolution of 10 mol% NaCl into NaBH 4, forming Na(BH 4) 0.9Cl 0.1, takes place during ball milling. A higher degree of dissolution of NaCl in NaBH 4 is obtained by annealing resulting in solid solutions containing up to 57 mol% NaCl, i.e. Na(BH 4) 0.43Cl 0.57. In addition, annealing results in dissolution of 10-20 mol% NaBH 4 into NaCl. The mechanism of the dissolution during annealing and the decomposition pathway of the solid solutions are studied by in situ SR-PXD. Furthermore, the stability upon hydrogen release and uptake were studied by Sieverts measurements.

  18. Amperometric Sensor for Detection of Chloride Ions

    OpenAIRE

    Rene Kizek; Petr Babula; Jaromir Hubalek; Vojtech Adam; Libuse Trnkova

    2008-01-01

    Chloride ion sensing is important in many fields such as clinical diagnosis, environmental monitoring and industrial applications. We have measured chloride ions at a carbon paste electrode (CPE) and at a CPE modified with solid AgNO3, a solution of AgNO3 and/or solid silver particles. Detection limits (3 S/N) for chloride ions were 100 μM, 100 μM and 10 μM for solid AgNO3, solution of AgNO3 and/or solid silver particles, respectively. The CPE modified with silver particles is the mo...

  19. Binary Nucleation of Water and Sodium Chloride

    Energy Technology Data Exchange (ETDEWEB)

    Nemec, Thomas [Institute of Thermomechanics ASCR, Prague, Czech Republic; Marsik, Frantisek [Institute of Thermomechanics ASCR, Prague, Czech Republic; Palmer, Donald [ORNL

    2005-01-01

    Nucleation processes in the binary water-sodium chloride system are investigated in the sense of the classical nucleation theory (CNT). The CNT is modified to be able to handle the electrolytic nature of the system and is employed to investigate the acceleration of the nucleation process due to the presence of sodium chloride in the steam. This phenomenon, frequently observed in the Wilson zone of steam turbines, is called early condensation. Therefore, the nucleation rates of the water-sodium chloride mixture are of key importance in the power cycle industry.

  20. Grafted wood pulp containing quaternary ammonium group and its application in the removal of different anions from aqueous solution

    International Nuclear Information System (INIS)

    Network wood pulp based on acrylonitrile has been chemically modified through different reactions to obtain group capable of anion exchange. Graft copolymerization of acrylonitrile onto wood pulp was carried out by using gamma-radiation 60Co. Factors affecting the grafting process e.g radiation dose and monomer concentration were investigated.The chemical modification of cyano groups were carried out by reaction with ethanol amine producing oxazoline group followed by quaternization of tertiary amine by reaction with benzyl chloride producing quaternary ammonium salt. The grafted and modified wood pulp were characterized by FTIR, SEM and TGA.Qualitative experiments of adsorption were conducted to evaluate the modified wood pulp on fixing sulfate, phosphate,nitrate and dichromate from aqueous solution using batch extractions. Based on the results obtained, it may be concluded that it is possible to modify chemically wood pulp containing cyano groups by different routes for its usage as anion exchanger

  1. Process for producing ammonium molybdate from molybdenum trioxide

    International Nuclear Information System (INIS)

    A process for producing ammonium molybdate from molybdenum trioxide having iron as an impurity is described comprising: (a) digesting the molybdenum trioxide with ammonia in a sealed vessel which is equipped with one or more stirrers at a temperature of from about 500C. to about 600C., at a pressure of from about 0.5 psig to about 15 psig, with the amount of ammonia being equal to from about 1.01 to about 1.8 times the stoichiometric amount needed to form normal ammonium molybdate, to form an ammonium molybdate solution containing essentially all of the starting molybdenum and a digestion residue containing essentially all of the iron; and (b) separating the solution from the residue

  2. Ammonium as a sustainable proton shuttle in bioelectrochemical systems.

    Science.gov (United States)

    Cord-Ruwisch, Ralf; Law, Yingyu; Cheng, Ka Yu

    2011-10-01

    This work examines a pH control method using ammonium (NH(4)(+)) as a sustainable proton shuttle in a CEM-equipped BES. Current generation was sustained by adding NH(3) or ammonium hydroxide (NH(4)OH) to the anolyte, controlling its pH at 7. Ammonium ion migration maintained the catholyte pH at approximately 9.25. Such NH(4)(+)/NH(3) migration accounted for 90±10% of the ionic flux in the BES. Reintroducing the volatilized NH(3) from the cathode into the anolyte maintained a suitable anolyte pH for sustained microbial-driven current generation. Hence, NH(4)(+)/NH(3) acted as a proton shuttle that is not consumed in the process. PMID:21865037

  3. Handling of Ammonium Nitrate Mother-Liquid Radiochemical Production - 13089

    International Nuclear Information System (INIS)

    The aim of the work is to develop a basic technology of decomposition of ammonium nitrate stock solutions produced in radiochemical enterprises engaged in the reprocessing of irradiated nuclear fuel and fabrication of fresh fuel. It was necessary to work out how to conduct a one-step thermal decomposition of ammonium nitrate, select and test the catalysts for this process and to prepare proposals for recycling condensation. Necessary accessories were added to a laboratory equipment installation decomposition of ammonium nitrate. It is tested several types of reducing agents and two types of catalyst to neutralize the nitrogen oxides. It is conducted testing of modes of the process to produce condensation, suitable for use in the conversion of a new technological scheme of production. It is studied the structure of the catalysts before and after their use in a laboratory setting. It is tested the selected catalyst in the optimal range for 48 hours of continuous operation. (authors)

  4. Performance of sulfate-dependent anaerobic ammo-nium oxidation

    Institute of Scientific and Technical Information of China (English)

    ZHANG Lei; ZHENG Ping; HE YuHui; JIN RenCun

    2009-01-01

    The performance of sulfate-dependent anaerobic ammonium oxidation was studied. The results showed that both SO42- and NH4+ were chemically stable under anaerobic conditions. They did not react with each other in the absence of biological catalyst (sludge). The anaerobic digested sludge cultivated in an anaerobic reactor for three years took on the ability of oxidizing ammonium with sulfate anaero-bically. The average reduction of sulfate and ammonium was 71.67 mg.L-1 and 56.82 mg.L-1 at high concentrations.The reaction between SO42- and NH4+ was difficult, though feasible, due to its low standard Gibbs free energy change. The experiment demonstrated that high substrate concentrations and low oxidation-reduction potential (ORP) may be favourable for the biological reaction.

  5. Performance of sulfate-dependent anaerobic ammonium oxidation

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    The performance of sulfate-dependent anaerobic ammonium oxidation was studied.The results showed that both SO42-and NH4+ were chemically stable under anaerobic conditions.They did not react with each other in the absence of biological catalyst(sludge).The anaerobic digested sludge cultivated in an anaerobic reactor for three years took on the ability of oxidizing ammonium with sulfate anaero-bically.The average reduction of sulfate and ammonium was 71.67 mg.L-1 and 56.82 mg.L-1 at high concentrations.The reaction between SO42-and NH4+ was difficult,though feasible,due to its low standard Gibbs free energy change.The experiment demonstrated that high substrate concentrations and low oxidation-reduction potential(ORP) may be favourable for the biological reaction.

  6. Enrichment culture of marine anaerobic ammonium oxidation (anammox) bacteria

    Institute of Scientific and Technical Information of China (English)

    GUAN Yong-jie

    2016-01-01

    The present study investigates the enrichment of anaerobic ammonium oxidation (anammox) bacteria in the marine environment using sediment samples obtained from the East China Sea and discusses the nitrogen removal efficiency of marine anammox bioreactor. Enrichment of anammox bacteria with simultaneous removal of nitrite and ammonium ions was observed in the Anaerobic Sequencing Batch Reactor under a total nitrogen loading rate of 0.37kg-N m-3day-1. In this study, The nitrogen removal efficiency was up to 80% and the molar-reaction ratio of ammonium, nitrite and nitrate was 1.0:1.22:0.22 which was a little different from a previously reported ratio of 1.0:1.32:0.26 in a freshwater system.

  7. Catastrophic event modeling. [lithium thionyl chloride batteries

    Science.gov (United States)

    Frank, H. A.

    1981-01-01

    A mathematical model for the catastrophic failures (venting or explosion of the cell) in lithium thionyl chloride batteries is presented. The phenomenology of the various processes leading to cell failure is reviewed.

  8. Aerosol isotopic ammonium signatures over the remote Atlantic Ocean

    Science.gov (United States)

    Lin, C. T.; Jickells, T. D.; Baker, A. R.; Marca, A.; Johnson, M. T.

    2016-05-01

    We report aerosol ammonium 15N signatures for samples collected from research cruises on the South Atlantic and Caribbean using a new high sensitivity method. We confirm a pattern of isotopic signals from generally light (δ15N -5 to -10‰), for aerosols with very low (ocean, to generally heavier values (δ15N +5 to +10‰), for aerosols collected in temperate and tropical latitudes and with higher ammonium concentrations (>2  nmol m-3). We discuss whether this reflects a mixing of aerosols from two end-members (polluted continental and remote marine emissions), or isotopic fractionation during aerosol transport.

  9. Chemical treatment of ammonium fluoride solution in uranium reconversion plant

    International Nuclear Information System (INIS)

    A chemical procedure is described for the treatment of the filtrate, produced from the transformation of uranium hexafluoride (U F6) into ammonium uranyl carbonate (AUC). This filtrate is an intermediate product in the U F6 to uranium dioxide (U O2) reconversion process. The described procedure recovers uranium as ammonium peroxide fluoro uranate (APOFU) by precipitation with hydrogen peroxide (H2 O2), and as later step, its calcium fluoride (CaF2) co-precipitation. The recovered uranium is recycled to the AUC production plant. (author)

  10. Ammonium 1-ammonioethane-1,1-diylbis(hydrogenphosphonate dihydrate

    Directory of Open Access Journals (Sweden)

    V. I. Pekhnyo

    2008-12-01

    Full Text Available The title compound, NH4+·C2H8NO6P2−·2H2O, was obtained by the reaction between 1-aminoethane-1,1-diyldiphosphonic acid and ammonium hydroxide (1:1 in an aqueous solution. The asymmetric unit contains one anion with two H atoms transferred from the phosphonic acid groups to the amino group of the anion and to an ammonia molecule, giving an ammonium cation. The structure displays N—H...O and O—H...O hydrogen bonding, which creates a three-dimensional network.

  11. Tripropyl­ammonium trithio­cyanurate

    OpenAIRE

    Yang, Yunxia

    2010-01-01

    In the title compound (systematic name: tripropyl­azanium 2,4,6-tris­ulfanyl­idene­cyclo­hexan-1-ide), (C3H7)3HN+·C3H2N3S3 −, one H atom of trithio­cyanuric acid is accepted by tripropyl­amine to form the ammonium ion. Coplanar trithio­cyanurate and tripropyl­ammonium ions [dihedral angle = 82.33 (8)°] form the salt, which is stabilised by various N—H⋯S and N—H⋯N contacts.

  12. Tripropyl­ammonium trithio­cyanurate

    Science.gov (United States)

    Yang, Yunxia

    2010-01-01

    In the title compound (systematic name: tripropyl­azanium 2,4,6-tris­ulfanyl­idene­cyclo­hexan-1-ide), (C3H7)3HN+·C3H2N3S3 −, one H atom of trithio­cyanuric acid is accepted by tripropyl­amine to form the ammonium ion. Coplanar trithio­cyanurate and tripropyl­ammonium ions [dihedral angle = 82.33 (8)°] form the salt, which is stabilised by various N—H⋯S and N—H⋯N contacts. PMID:21588990

  13. Recovery of uranium values from ammonium diuranate filtrate

    International Nuclear Information System (INIS)

    In the conversion of uranium hexafluoride (UF6) to UO2 or U metal powder, ammonium diuranate filtrate (ADUF) is generated by precipitation of uranyl fluoride solution (UO2F2) with ammonium hydroxide solution (NH4OH). This filtrate contains uranium in the range of 150-200 mg/l and fluoride ions in the range of 10-15 g/l. Uranium is present in the filtrate in hexavalent state as mixed fluoride complex particularly, UO2F2.3NH4F, which is quite soluble in aqueous medium and leads to loss of precious uranium in the effluent stream and also poses disposal issues

  14. Monoclonal antibodies to the apical chloride channel in Necturus gallbladder inhibit the chloride conductance.

    OpenAIRE

    Finn, A L; Tsai, L M; Falk, R J

    1989-01-01

    Monoclonal antibodies raised by injecting Necturus gallbladder cells into mice were tested for their ability to inhibit the apical chloride conductance induced by elevation of cellular cAMP. Five of these monoclonal antibodies bound to the apical cells, as shown by indirect immunofluorescence microscopy, and inhibited the chloride conductance; one antibody that bound only to subepithelial smooth muscle, by indirect immunofluorescence microscopy, showed no inhibition of chloride transport. The...

  15. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    OpenAIRE

    H. Guan; Love, A. J.; C. T. Simmons; A. S. Kayaalp

    2009-01-01

    Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB) method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the CMB approach. Furthermore, intensive vegetation clearance for agriculture, for example during the European settlement in many...

  16. Telomerization of Vinyl Chloride with Chloroform Initiated by Ferrous Chloride-Dimethylacetamide under Ultrasonic Conditions

    Directory of Open Access Journals (Sweden)

    Hua Qian

    2015-01-01

    Full Text Available Telomerization of vinyl chloride with chloroform was investigated using ferrous chloride-dimethylacetamide system, and 42.1% yield, more than four times the one reported before, was achieved. The addition of ultrasound further improved the reaction and yield was raised to 51.9% with trace byproducts at highly reduced reaction time and temperature. Ferrous chloride-dimethylacetamide under ultrasonic irradiation acts as a very efficient catalyst system for the 1 : 1 telomerization.

  17. The kinetics of the hydrogen chloride oxidation

    Directory of Open Access Journals (Sweden)

    Gonzalez Martinez Isai

    2013-01-01

    Full Text Available Hydrogen chloride (HCl oxidation has been investigated on technical membrane electrode assemblies in a cyclone flow cell. Influence of Nafion loading, temperature and hydrogen chloride mole fraction in the gas phase has been studied. The apparent kinetic parameters like reaction order with respect to HCl, Tafel slope and activation energy have been determined from polarization data. The apparent kinetic parameters suggest that the recombination of adsorbed Cl intermediate is the rate determining step.

  18. Estimating the chloride transport in cement paste

    OpenAIRE

    Princigallo, A.

    2012-01-01

    A method was developed to measure the diffusion coefficient of chloride ions in cement paste based on an analytical solution to Fick’s 2nd law in a cylindrical coordinate system. This natural method yielded diffusivity results within as little as a month. Testing time was reduced by exploiting the three-dimensional inward flux in the specimen. In an attempt to determine the saturation concentration, dense portland cement pastes were exposed to a concentrated chloride solution. The method prov...

  19. Effect of Chloride Type on Penetration of Chloride Ions in Concrete

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The influence of chloride type on the diffusivity of chloride ions in concrete was studied by experiment. The result shows that the glectric resistance of concrete and the chloride diffusion coefficient are influenced by chloride type. For the same water/cement ratio (W/C), the diffusion coefficient D in KCl solution is larger than that in NaCl solution; however, the concrete resistance in KCl solution is smaller than that in NaCl solution. The experimental result is analyzed with theory of diffusion.

  20. Synthesis and characterization of antibacterial polyurethane coatings from quaternary ammonium salts functionalized soybean oil based polyols.

    Science.gov (United States)

    Bakhshi, Hadi; Yeganeh, Hamid; Mehdipour-Ataei, Shahram; Shokrgozar, Mohammad Ali; Yari, Abbas; Saeedi-Eslami, Seyyed Nasirodin

    2013-01-01

    In this study, a simple and versatile synthetic approach was developed to prepare bactericidal polyurethane coatings. For this purpose, introduction of both quaternary ammonium salts (QASs), with well-known antibacterial activity, and reactive hydroxyl groups on to the backbone of soybean oil was considered. Epoxidized soybean oil was reacted with diethylamine and the intermediate tertiary amine containing polyol was reacted with two different alkylating agents, methyl iodide and benzyl chloride, to produce MQAP and BQAP, respectively. These functional polyols were reacted with different diisocyanate monomers to prepare polyurethane coatings. Depending on the structure of monomers used for the preparation of polyurethane coatings, initial modulus, tensile strength and elongation at break of samples were in the ranges of 122-339 MPa, 4.6-12.4 MPa and 8.4-46%, respectively. Polyurethane coatings based on isophorone diisocyanate showed proper mechanical properties and adhesion strength (0.41 MPa) for coating application. Study of fibroblast cells interaction with prepared polyurethanes showed promising cells viability in the range of 78-108%. Meanwhile, MQAP based samples with higher concentration of QASs showed better adhesion strength, surface hydrophilicity and antibacterial activity (about 95% bacterial reduction). Therefore, these materials can find applications as bactericidal coating for biomedical devices and implants. PMID:25428057

  1. Evaluating Battery-like Reactions to Harvest Energy from Salinity Differences using Ammonium Bicarbonate Salt Solutions.

    Science.gov (United States)

    Kim, Taeyoung; Rahimi, Mohammad; Logan, Bruce E; Gorski, Christopher A

    2016-05-10

    Mixing entropy batteries (MEBs) are a new approach to generate electricity from salinity differences between two aqueous solutions. To date, MEBs have only been prepared from solutions containing chloride salts, owing to their relevance in natural salinity gradients created from seawater and freshwater. We hypothesized that MEBs could capture energy using ammonium bicarbonate (AmB), a thermolytic salt that can be used to convert waste heat into salinity gradients. We examined six battery electrode materials. Several of the electrodes were unstable in AmB solutions or failed to produce expected voltages. Of the electrode materials tested, a cell containing a manganese oxide electrode and a metallic lead electrode produced the highest power density (6.3 mW m(-2) ). However, this power density is still low relative to previously reported NaCl-based MEBs and heat recovery systems. This proof-of-concept study demonstrated that MEBs could indeed be used to generate electricity from AmB salinity gradients. PMID:27030080

  2. Synthesis, characterization and antibacterial properties of dihydroxy quaternary ammonium salts with long chain alkyl bromides.

    Science.gov (United States)

    Liu, Wen-Shuai; Wang, Chun-Hua; Sun, Ju-Feng; Hou, Gui-Ge; Wang, Yu-Peng; Qu, Rong-Jun

    2015-01-01

    Five N-methyl-N-R-N,N-bis(2-hydroxyethyl) ammonium bromides (R = -benzyl (chloride, BNQAS), -dodecyl (C12QAS), -tetradecyl (C14QAS), -hexadecyl (C16QAS), -octadecyl (C18QAS)) were prepared based on N-methyldiethanolamine (MDEA) and halohydrocarbon. Five QAS were characterized by FTIR, NMR, and MS. BNQAS, C12QAS, C14QAS, and C16QAS were confirmed by X-ray single-crystal diffraction. Their antibacterial properties indicated good antibacterial abilities against E. coli, S. aureus, B. subtilis, especially C12QAS with the best antibacterial ability (100% to E. coli, 95.65% to S. aureus, and 91.41% to B. subtilis). In addition, C12QAS also displayed the best antifungal activities than BNQAS and C18QAS against Cytospora mandshurica, Botryosphaeria ribis, Physalospora piricola, and Glomerella cingulata with the ratio of full marks. The strategy provides a facile way to design and develop new types of antibacterial drugs for application in preventing the fruit rot, especially apple. PMID:25215430

  3. The Influence of Interfering Substances on the Antimicrobial Activity of Selected Quaternary Ammonium Compounds

    Directory of Open Access Journals (Sweden)

    Paula A. Araújo

    2013-01-01

    Full Text Available Standard cleaning processes may not remove all the soiling typically found in food industry, such as carbohydrates, fats, or proteins. Contaminants have a high impact in disinfection as their presence may reduce the activity of disinfectants. The influence of alginic acid, bovine serum albumin, yeast extract, and humic acids was assessed on the antimicrobial activities of benzalkonium chloride and cetyltrimethyl ammonium bromide against Bacillus cereus vegetative cells and Pseudomonas fluorescens. The bacteria (single and consortium were exposed to surfactants (single and combined in the absence and presence of potential disinfection interfering substances. The antimicrobial effects of the surfactants were assessed based on the bacterial respiratory activity measured by oxygen uptake rate due to glucose oxidation. The tested surfactants were efficient against both bacteria (single and consortium with minimum bactericidal concentrations ranging from 3 to 35 mg·L−1. The strongest effect was caused by humic acids that severely quenched antimicrobial action, increasing the minimum bactericidal concentration of the surfactants on P. fluorescens and the consortium. The inclusion of the other interfering substances resulted in mild interferences in the antibacterial activity. This study clearly demonstrates that humic acids should be considered as an antimicrobial interfering substance in the development of disinfection strategies.

  4. 49 CFR 179.102-17 - Hydrogen chloride, refrigerated liquid.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Hydrogen chloride, refrigerated liquid. 179.102-17...) § 179.102-17 Hydrogen chloride, refrigerated liquid. Each tank car used to transport hydrogen chloride... on or after March 16, 2009 used for the transportation of hydrogen chloride, refrigerated...

  5. 21 CFR 178.3290 - Chromic chloride complexes.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Chromic chloride complexes. 178.3290 Section 178... SANITIZERS Certain Adjuvants and Production Aids § 178.3290 Chromic chloride complexes. Myristo chromic chloride complex and stearato chromic chloride complex may be safely used as release agents in the...

  6. Mechanism of HERG potassium channel inhibition by tetra-n-octylammonium bromide and benzethonium chloride

    Energy Technology Data Exchange (ETDEWEB)

    Long, Yan; Lin, Zuoxian [Key Laboratory of Regenerative Biology, Guangzhou Institute of Biomedicine and Health, Chinese Academy of Sciences, Guangzhou 510530 (China); Xia, Menghang; Zheng, Wei [National Center for Advancing Translational Sciences, National Institutes of Health, Bethesda, MD 20892 (United States); Li, Zhiyuan, E-mail: li_zhiyuan@gibh.ac.cn [Key Laboratory of Regenerative Biology, Guangzhou Institute of Biomedicine and Health, Chinese Academy of Sciences, Guangzhou 510530 (China)

    2013-03-01

    Tetra-n-octylammonium bromide and benzethonium chloride are synthetic quaternary ammonium salts that are widely used in hospitals and industries for the disinfection and surface treatment and as the preservative agent. Recently, the activities of HERG channel inhibition by these compounds have been found to have potential risks to induce the long QT syndrome and cardiac arrhythmia, although the mechanism of action is still elusive. This study was conducted to investigate the mechanism of HERG channel inhibition by these compounds by using whole-cell patch clamp experiments in a CHO cell line stably expressing HERG channels. Tetra-n-octylammonium bromide and benzethonium chloride exhibited concentration-dependent inhibitions of HERG channel currents with IC{sub 50} values of 4 nM and 17 nM, respectively, which were also voltage-dependent and use-dependent. Both compounds shifted the channel activation I–V curves in a hyperpolarized direction for 10–15 mV and accelerated channel activation and inactivation processes by 2-fold. In addition, tetra-n-octylammonium bromide shifted the inactivation I–V curve in a hyperpolarized direction for 24.4 mV and slowed the rate of channel deactivation by 2-fold, whereas benzethonium chloride did not. The results indicate that tetra-n-octylammonium bromide and benzethonium chloride are open-channel blockers that inhibit HERG channels in the voltage-dependent, use-dependent and state-dependent manners. - Highlights: ► Tetra-n-octylammonium and benzethonium are potent HERG channel inhibitors. ► Channel activation and inactivation processes are accelerated by the two compounds. ► Both compounds are the open-channel blockers to HERG channels. ► HERG channel inhibition by both compounds is use-, voltage- and state dependent. ► The in vivo risk of QT prolongation needs to be studied for the two compounds.

  7. Synergistic effect between cationic gemini surfactant and chloride ion for the corrosion inhibition of steel in sulphuric acid

    Energy Technology Data Exchange (ETDEWEB)

    Qiu Lingguang [School of Chemistry and Chemical Engineering, Anhui University, Hefei 230039 (China)], E-mail: lgqiu@ahu.edu.cn; Wu Yun; Wang Yimin; Jiang Xia [School of Chemistry and Chemical Engineering, Anhui University, Hefei 230039 (China)

    2008-02-15

    Corrosion inhibition of cold rolled steel in 0.5 mol L{sup -1} sulphuric acid by a quaternary ammonium gemini surfactant, l,3-propane-bis(dimethyl dodecylammonium bromide) (designated as 12-3-12), in the absence and presence of chloride ions was investigated at different temperatures. The results revealed significant synergistic effect between gemini 12-3-12 and chloride ions for the corrosion protection of cold rolled steel in sulphuric acid, and that the novel composite inhibitor system containing cationic gemini surfactant and chloride ions was efficient and low-cost for steel corrosion inhibition in sulphuric acid medium, even when concentration of 12-3-12 was as low as 1 x 10{sup -6} mol L{sup -1}. By fitting the obtained experimental data with Langmuir adsorption model and Arrhenius equation, some thermodynamic and kinetic parameters such as adsorption free energy, the apparent activation energy, and the pre-exponential factor were estimated. The adsorption mechanism of the gemini surfactant onto steel surface in acid medium in the absence and presence of chloride ions was also discussed, respectively.

  8. Fate of N from Green Manures and Ammonium Sulfate

    Institute of Scientific and Technical Information of China (English)

    SHISHU-LIAN; WENQI-XIAO; 等

    1991-01-01

    By means of 15N tracer technique the fate of N in ammonium sulfate,milk vetch,sesbania and azolla,and the availability of their residual N were studied in a microplot experiment.Results showed that a) at the end of the first crop of early rice,both plant recovery and loss of N from ammonium sulfate were the highest whereas those from azolla were the lowest with those from milk vetch and sesbania in between;the sequence was reversed in terms of recovery of N in soil;the net residual N from ammonium sulfate was very low,about 1/7-1/4 of that from green manures,indicating that chemical N fertilizer contributes little to the soil N reserve;b) plant recovery of the residual N was low and it did not always decrease with time;the total plant recovery (from the second to the fifth crops) of the residual N from various test fertilizers was only 8-11% of the total N originally applied;c) the plant recovery of the residual N from ammonium sulfate was the highest,followed by those from milk vetch and sesbania,and that from azolla was the lowest,no matter in which cropping season (from the second to the fifth);N availability ratio showed the same trend,indicating that chemical N fertilizer helps renovate soil organic N,maintain and increase availability of soil N.

  9. Increase of water resistance of ammonium nitrate explosives

    Directory of Open Access Journals (Sweden)

    Zulkhair Mansurov

    2012-03-01

    Full Text Available Developed a method of kapsulating of ammonium nitrate with liquid paraffin increase finding explosives in water for 60 minutes. Placing explosives in the plastic shell, the explosive was, as in standing or running water during the day. When conducting field tests failures were absent.

  10. Growth features of ammonium hydrogen -tartrate single crystals

    Indian Academy of Sciences (India)

    G Sajeevkumar; R Raveendran; B S Remadevi; Alexander Varghese Vaidyan

    2004-08-01

    Ammonium hydrogen -tartrate (-AHT) single crystals were grown in silica gel. The growth features of these crystals with variation of parameters like specific gravity of the gel, gel pH, acid concentrations, concentration of the feed solution and gel age were studied in detail.

  11. Aqueous Media Oxidation of Alcohols with Ammonium Persulfate

    Institute of Scientific and Technical Information of China (English)

    IMANZADEH, Gholam Hassan; ZAMANLOO, Mohammad R.; MANSOORI, Yaghoob; KHODAYARI, Ali

    2007-01-01

    Oxidation of series of various primary and secondary alcohols to corresponding carbonyl compounds with ammonium persulfate in aqueous media was described. No over oxidation of primary alcohols to carboxylic acids and secondary alcohols to esters was observed. Under such conditions benzoin was converted to benzoic acid.

  12. Characterization of ammonium polyuranate powders from a continuous precipitator

    International Nuclear Information System (INIS)

    Ammonium polyuranate powders produced in a continuous, well-mixed precipitator were characterized by means of electron microscopy. The powders were qualitatively analyzed with the scanning electron microscope and the elementary crystallites were quantivatively analyzed with the transmission electron microscope. The results were fit to a kinetic theory of continuous precipitation. A phase analysis was also preformed by x-ray powder diffraction

  13. New synthetic method and properties of ammonium dinitramide (ADN)

    Energy Technology Data Exchange (ETDEWEB)

    Hatano, H.; Onda, T.; Shi Ino, K.; Kiname, S.I. [Technical Center, Hosoya Kako, Osawa (Japan); Miyazaki, S.; Suzuki, S. [Research et Development Center, Nissan Motor Co, Saitama (Japan)

    1996-12-31

    Ammonium dinitramide (ADN) is one of the energetic materials, its hazard, however, has never been presented yet. In this paper, new synthetic method of ADN and its properties are contained. It has been found out that ADN has little hazard and is a safe energetic compound. (authors) 4 refs.

  14. Ammonium dinitramide (ADN)-Prilling, coating, and characterization

    Energy Technology Data Exchange (ETDEWEB)

    Heintz, Thomas; Pontius, Heike; Aniol, Jasmin; Birke, Christoph; Leisinger, Karlfred; Reinhard, Werner [Fraunhofer-Institut Chemische Technologie ICT, Pfinztal (Germany)

    2009-06-15

    Ammonium dinitramide (ADN) is the promising oxidizer, which is expected to be applied, e.g., in solid rocket propellants. The manufacturing of spherical ADN particles (the so-called ADN-Prills) with useful morphology and reproducible quality is realized by means of the emulsion crystallization process. (Abstract Copyright [2009], Wiley Periodicals, Inc.)

  15. Treating leachate mixture with anaerobic ammonium oxidation technology

    Institute of Scientific and Technical Information of China (English)

    ZHANG Hong-guo; ZHOU Shao-qi

    2006-01-01

    Large amounts of ammonium and a low content of biodegradable chemical oxygen demand(COD) are contained in leachate from aged landfills, together with the effluent containing high concentration of nitric nitrogen after biochemical treatment.Treatment effect of anaerobic ammonium oxidation (anammox) process on the mixture of the leachate and its biochemical effluent was investigated. The results show that the average removal efficiencies of ammonium, nitric nitrogen and total nitrogen are 87.51%,74.95% and 79.59%, respectively, corresponding to the average ratio of removed nitric nitrogen to ammonium, i.e. 1.14 during the steady phase of anammox activity. The mean removal efficiency of COD is only 24.01% during the experimental period. The demand of total phosphorous for the anammox process is unobvious. Especially, the alkalinity and pH value of the effluent are close to those of the influent during the steady phase of anammox activity. In addition, it is demonstrated that the status of the anammox bioreactor can be indicated by the alkalinity and pH value during the course of the experiment. The anammox bioreactor has shown potential for nitrogen removal in the leachate mixture. However, COD and total phosphorous in the leachate mixture need further treatment for removal efficiencies of COD and total phosphorous are not good in the anammox bioreactor.

  16. Characterization of ammonium polyuranate powders from a continuous precipitator

    Energy Technology Data Exchange (ETDEWEB)

    Oolman, T.

    1979-01-01

    Ammonium polyuranate powders produced in a continuous, well-mixed precipitator were characterized by means of electron microscopy. The powders were qualitatively analyzed with the scanning electron microscope and the elementary crystallites were quantivatively analyzed with the transmission electron microscope. The results were fit to a kinetic theory of continuous precipitation. A phase analysis was also preformed by x-ray powder diffraction.

  17. Ammonium transformation in a nitrogen-rich tidal freshwater marsh

    DEFF Research Database (Denmark)

    Gribsholt, B.; Andersson, M.; Boschker, H.T.S.; Brion, N.; De Brabandere, Loreto; Dehairs, F.; Meire, P.; Middelburg, J.J.; Struyf, E.; Tramper, A.; Van Damme, S.

    2006-01-01

    The fate and transport of watershed-derived ammonium in a tidal freshwater marsh fringing the nutrient rich Scheldt River, Belgium, was quantified in a whole ecosystem 15N labeling experiment. In late summer (September) we added 15N-NH4+ to the flood water entering a 3477 m2 tidal freshwater mars...

  18. 21 CFR 184.1141a - Ammonium phosphate, monobasic.

    Science.gov (United States)

    2010-04-01

    ... phosphoric acid at a pH below 5.8. (b) The ingredient meets the specifications of the Food Chemicals Codex... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium phosphate, monobasic. 184.1141a Section 184.1141a Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN...

  19. 21 CFR 184.1141b - Ammonium phosphate, dibasic.

    Science.gov (United States)

    2010-04-01

    ... acid at a pH above 5.8. (b) The ingredient meets the specifications of the Food Chemicals Codex, 3d Ed... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Ammonium phosphate, dibasic. 184.1141b Section 184.1141b Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES...

  20. Salmonella enterica Strains with Reduced Susceptibility to Quarternary Ammonium Compounds

    Science.gov (United States)

    Background: Salmonella spp. are responsible for 76 million illnesses per year in the U.S. Quaternary ammonium compounds (QAC) are commonly used antimicrobial agents. Reduced susceptibility to these compounds by a broad spectrum of organisms is a concern. Methods: Salmonella enterica strains with r...

  1. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    Directory of Open Access Journals (Sweden)

    H. Guan

    2009-09-01

    Full Text Available Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the CMB approach. Furthermore, intensive vegetation clearance for agriculture, for example during the European settlement in many coastal areas of Australia, may have perturbed catchment chloride balance conditions for appropriate use in CMB applications. In order to deal with these issues, a high resolution chloride deposition map in the coastal region is needed. In this study, we examined geographic, orographic, and atmospheric factors influencing chloride deposition in the Mount Lofty Ranges (MLR, a coastal hilly area of approximately 9000 km2 spatial extent in South Australia, using partial correlation and regression analyses. The results indicate that coastal distance, and terrain aspect and slope are two most significant factors controlling chloride deposition. Coastal distance accounts for 65% spatial variability in chloride deposition, with terrain aspect and slope for 8%. The deposition gradient is about 0.08 gm-2 year-1 km-1 as one progresses inland. The results are incorporated into a published de-trended residual kriging approach (ASOADeK to produce a 1 km×1 km resolution annual chloride deposition map and a bulk precipitation chloride concentration map. The average uncertainty of the deposition map is about 30% in the western MLR, and over 50% in the eastern MLR. The maps will form a very useful basis for examining catchment chloride balances for use in the CMB application in the study area.

  2. Preparation of the chitosan grafted poly (quaternary ammonium)/Fe3O4 nanoparticles and its adsorption performance for food yellow 3.

    Science.gov (United States)

    Yu, Chen; Geng, Jianqiang; Zhuang, Yunxia; Zhao, Jian; Chu, Liqiu; Luo, Xiaoxuan; Zhao, Ying; Guo, Yanwen

    2016-11-01

    Chitosan and its derivatives can be used to modify magnetic materials to promote the adsorption properties of the magnetic materials and avoid the weakness of chitosan and its derivatives. In the present study, chitosan grafted poly(trimethyl allyl ammonium chloride) (CTS-g-PTMAAC) was prepared by graft copolymerization; then it was coated on the surfaces of the sodium citrate coated Fe3O4 nanoparticles (SC-Fe3O4) to prepare a novel composite CTS-g-PTMAAC/SC-Fe3O4 magnetic nanoparticles, with which possesses abundant surface positive charges. The structure and properties of the CTS-g-PTMAAC/SC-Fe3O4 composite magnetic nanoparticles were characterized by FTIR, TEM, VSM, and zeta potential. The dye adsorption characteristics of the CTS-g-PTMAAC/SC-Fe3O4 nanoparticles were determined using the food yellow 3 aqueous solutions as a model food effluent. Effect of pH of the dye solution on the adsorption of food yellow 3 was determined and compared with N-2-hydroxylpropyl trimethyl ammonium chloride chitosan coated sodium citrate-Fe3O4 (CTS-g-HTCC/SC-Fe3O4) composite magnetic nanoparticles. The adsorption kinetics, adsorption isotherms, adsorption thermodynamics, and desorption and reusability of the magnetic nanoparticles were investigated. PMID:27516279

  3. Structure, hydrogen bonding and thermal expansion of ammonium carbonate monohydrate.

    Science.gov (United States)

    Fortes, A Dominic; Wood, Ian G; Alfè, Dario; Hernández, Eduardo R; Gutmann, Matthias J; Sparkes, Hazel A

    2014-12-01

    We have determined the crystal structure of ammonium carbonate monohydrate, (NH4)2CO3·H2O, using Laue single-crystal diffraction methods with pulsed neutron radiation. The crystal is orthorhombic, space group Pnma (Z = 4), with unit-cell dimensions a = 12.047 (3), b = 4.453 (1), c = 11.023 (3) Å and V = 591.3 (3) Å(3) [ρcalc = 1281.8 (7) kg m(-3)] at 10 K. The single-crystal data collected at 10 and 100 K are complemented by X-ray powder diffraction data measured from 245 to 273 K, Raman spectra measured from 80 to 263 K and an athermal zero-pressure calculation of the electronic structure and phonon spectrum carried out using density functional theory (DFT). We find no evidence of a phase transition between 10 and 273 K; above 273 K, however, the title compound transforms first to ammonium sesquicarbonate monohydrate and subsequently to ammonium bicarbonate. The crystallographic and spectroscopic data and the calculations reveal a quite strongly hydrogen-bonded structure (EHB ≃ 30-40 kJ mol(-1)), on the basis of H...O bond lengths and the topology of the electron density at the bond critical points, in which there is no free rotation of the ammonium cation at any temperature. The barrier to free rotation of the ammonium ions is estimated from the observed librational frequency to be ∼ 36 kJ mol(-1). The c-axis exhibits negative thermal expansion, but the thermal expansion behaviour of the a and b axes is ormal. PMID:25449618

  4. Inhibition of nitrite-induced toxicity in channel catfish by calcium chloride and sodium chloride

    Science.gov (United States)

    Tommasso J.R., Wright, M. I.; Simco, B.A.; Davis, K.B.

    1980-01-01

    Environmental chloride has been shown to inhibit methemoglobin formation in fish, thereby offering a protective effect against nitrite toxicity. Channel catfish (Ictalurus punctatus) were simultaneously exposed to various environmental nitrite and chloride levels (as either CaCl2 or NaCl) in dechlorinated tap water (40 mg/L total hardness, 47 mg/L alkalinity, 4 mg/L chloride, pH = 6.9-7.1, and temperature 21-24°C). Methemoglobin levels in fish simultaneously exposed to 2.5 mg/L nitrite and up to 30 mg/L chloride as either CaCl2 or NaCl were similar but significantly lower than in unprotected fish. Exposure to 10 mg/L nitrite and 60 mg/L chloride resulted in methemoglobin levels similar to those of the controls; most unprotected fish died. Fish exposed to 10 mg/L nitrite had significantly lower methemoglobin levels when protected with 15.0 mg/L chloride as CaCl2 than with NaCl. Fish exposed to nitrite in the presence of 60 mg/L chloride (as either CaCl2 or NaCl) had similar 24-h LC50 values that were significantly elevated above those obtained in the absence of chloride. Calcium had little effect on tolerance to nitrite toxicity in channel catfish in contrast to its large effect reported in steelhead trout (Salmo gairdneri).

  5. Amine and Titanium (IV Chloride, Boron (III Chloride or Zirconium (IV Chloride-Promoted Baylis-Hillman Reactions

    Directory of Open Access Journals (Sweden)

    Shi-Cong Cui

    2001-10-01

    Full Text Available The Baylis-Hillman reactions of various aryl aldehydes with methyl vinyl ketone at temperatures below -20oC using Lewis acids such as titanium (IV chloride, boron (III chloride or zirconium (IV chloride in the presence of a catalytic amount of selected amines used as a Lewis bases afford the chlorinated compounds 1 as the major product in very high yields. Acrylonitrile can also undergo the same reaction to give the corresponding chlorinated product in moderate yield. A plausible reaction mechanism is proposed. However, if the reaction was carried out at room temperature (ca. 20oC, then the Z-configuration of the elimination product 3, derived from 1, was formed as the major product.

  6. Thermal stability of thiocarbamide coordination compounds of terbium-, dysprosium-, holmium- and erbium chlorides

    International Nuclear Information System (INIS)

    Thiocarbamide coordination compounds of the MCl3x1.25 CS(NH2)2x5H2O composition, where M-Tb, Dy, Ho, Er are obtained for the first time. The individuality of these agents is shown by the chemical and X-ray analyses. On the basis of the infrared spectroscopy data the assumption is made that thiocarbamide sulfur atom takes art in the chemical bond formation. The thermal decomposition of thiocarbamide compounds of lanthanum chlorides has been studied by the thermography, thermogravimetry methods combined with the chemical, X-ray-phase analyses and infrared spectroscopy and it has been established that partial dehydration of investigated compounds occurs at 80 deg C; full thiocarbamide isometrization into the rhodonate of ammonium takes place at 140 deg C; terbium oxychloride formation is observed at 380 deg C; for dysprosium oxychloride - 400 deg C; for holmium- and erbium oxychlorides - 515 deg C

  7. Antibacterial activity of reactive quaternary ammonium compounds in solution and in nonleachable coatings

    NARCIS (Netherlands)

    Gozzelino, G.; Romero Tobar, D.E.; Chaitiemwong, N.; Hazeleger, W.C.; Beumer, R.R.

    2011-01-01

    Antibacterial polymers suitable for coating applications without leaching of the biocidal component have been obtained by UV copolymerization of acrylic resins with acrylic monomers containing quaternary ammonium moieties. Suitable reactive biocides, based on quaternary ammonium monomers (QAMs), end

  8. Densities, refractive indices, and viscosities of N,N-diethylethanol ammonium chloride–glycerol or –ethylene glycol deep eutectic solvents and their aqueous solutions

    International Nuclear Information System (INIS)

    Highlights: • The densities, refractive indices, and viscosities of aqueous DES solutions were measured. • DES are made from N,N-diethylethanol ammonium chloride + glycerol or ethylene glycol. • The temperature studied was (298.15 to 343.15) K. • The measured data were reported as functions of temperature and composition. • The measured data were represented satisfactorily by the applied correlations. -- Abstract: In this work, we report new experimental data on density, ρ, refractive index, nD, and viscosity, η, of two deep eutectic solvents, N,N-diethylethanol ammonium chloride–glycerol (DEACG) and N,N-diethylethanol ammonium chloride–ethylene glycol (DEACEG), and their aqueous solutions, over the complete composition range, at temperatures from (298.15 to 343.15) K. Densities and viscosities were measured using the vibrating tube and the falling ball techniques, respectively, while the refractive index at the sodium D line was measured using an automatic refractometer. We aimed to represent the measured properties as a function of temperature and composition, and correlated them using the Redlich–Kister-type equation, for density, a polynomial function, for refractive index, and the Vogel–Fulcher–Tammann (VFT) equation, for viscosity

  9. Hydrolysis of ferric chloride in solution

    International Nuclear Information System (INIS)

    The Detox trademark process uses concentrated ferric chloride and small amounts of catalysts to oxidize organic compounds. It is under consideration for oxidizing transuranic organic wastes. Although the solution is reused extensively, at some point it will reach the acceptable limit of radioactivity or maximum solubility of the radioisotopes. This solution could be cemented, but the volume would be increased substantially because of the poor compatibility of chlorides and cement. A process has been developed that recovers the chloride ions as HCl and either minimizes the volume of radioactive waste or permits recycling of the radioactive chlorides. The process involves a two-step hydrolysis at atmospheric pressure, or preferably under a slight vacuum, and relatively low temperature, about 200 degrees C. During the first step of the process, hydrolysis occurs according to the reaction below: FeCl3liquid + H2O → FeOClsolid + 2 HClgas During the second step, the hot, solid, iron oxychloride is sprayed with water or placed in contact with steam, and hydrolysis proceeds to the iron oxide according to the following reaction: 2 FeOClsolid + H2O → Fe2O3solid + 2 HClgas. The iron oxide, which contains radioisotopes, can then be disposed of by cementation or encapsulation. Alternately, these chlorides can be washed off of the solids and can then either be recycled or disposed of in some other way

  10. Chloride equilibrium potential in salamander cones

    Directory of Open Access Journals (Sweden)

    Bryson Eric J

    2004-12-01

    Full Text Available Abstract Background GABAergic inhibition and effects of intracellular chloride ions on calcium channel activity have been proposed to regulate neurotransmission from photoreceptors. To assess the impact of these and other chloride-dependent mechanisms on release from cones, the chloride equilibrium potential (ECl was determined in red-sensitive, large single cones from the tiger salamander retinal slice. Results Whole cell recordings were done using gramicidin perforated patch techniques to maintain endogenous Cl- levels. Membrane potentials were corrected for liquid junction potentials. Cone resting potentials were found to average -46 mV. To measure ECl, we applied long depolarizing steps to activate the calcium-activated chloride current (ICl(Ca and then determined the reversal potential for the current component that was inhibited by the Cl- channel blocker, niflumic acid. With this method, ECl was found to average -46 mV. In a complementary approach, we used a Cl-sensitive dye, MEQ, to measure the Cl- flux produced by depolarization with elevated concentrations of K+. The membrane potentials produced by the various high K+ solutions were measured in separate current clamp experiments. Consistent with electrophysiological experiments, MEQ fluorescence measurements indicated that ECl was below -36 mV. Conclusions The results of this study indicate that ECl is close to the dark resting potential. This will minimize the impact of chloride-dependent presynaptic mechanisms in cone terminals involving GABAa receptors, glutamate transporters and ICl(Ca.

  11. Investigation of electric discharge treatment of water for ammonium nitrogen removal

    International Nuclear Information System (INIS)

    The possibility of water purification from ammonium nitrogen using pulsed electric discharge in water-air mixtures was investigated. The model solution of chlorous ammonium was used in experiments. The concentration of ions ammonium was about 300 mg/l. Achieved reduction of ammonium concentration was about 35%. In this paper the mechanism of this process is discussed. The ways to increasing efficiency of this method are proposed

  12. 40 CFR 721.10100 - Dialkyl dimethyl ammonium carbonate (2:1) (generic).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Dialkyl dimethyl ammonium carbonate (2... Specific Chemical Substances § 721.10100 Dialkyl dimethyl ammonium carbonate (2:1) (generic). (a) Chemical... as dialkyl dimethyl ammonium carbonate (2:1) (PMN P-03-716) is subject to reporting under...

  13. Combining sulfate electrowinning with chloride leaching

    Science.gov (United States)

    Fletcher, A. W.; Sudderth, R. B.; Olafson, S. M.

    1991-08-01

    Although the chloride leaching of copper sulfide concentrates has proved highly efficient, electrowinning from chloride solutions presents many difficulties, notably in cell design and the handling of the powder product. Sulfate electrowinning,on the other hand, continues to improve and has played a significant part in the widespread adoption of the solvent extraction-electrowinning process for copper recovery from low-grade ores. It has been found that the two steps can be combined by introducing a novel solvent extraction process after chloride leaching. This article presents the results of laboratory tests to prove the feasibility of this approach and discusses how it can be integrated into a commercially viable flow sheet.

  14. Anaerobic ammonium oxidation, denitrification and dissimilatory nitrate reduction to ammonium in the East China Sea sediment

    Directory of Open Access Journals (Sweden)

    G. D. Song

    2013-03-01

    Full Text Available Benthic nitrogen transformation pathways were investigated in the sediment of the East China Sea in June of 2010 using the 15N isotope pairing technique. Slurry incubations indicated that denitrification, anammox and dissimilatory nitrate reduction to ammonium (DNRA as well as nitrate release by nitrate storing organisms occurred in the East China Sea sediments. These four processes did not exist independently, the nitrate release therefore diluted the 15N labeling fraction of NO3−, a part of the 15NH4+ derived from DNRA also formed 30N2 via anammox. Therefore current methods of rate calculations led to over and underestimations of anammox and denitrification respectively. Following the procedure outlined in Thampdrup and Dalsgaard (2002, denitrification rates were slightly underestimated by on average 6% without regard to the effect of nitrate release, while this underestimation could be counteracted by the presence of DNRA. On the contrary, anammox rates calculated from 15NO3− experiment were significantly overestimated by 42% without considering nitrate release. In our study this overestimation could only be compensated 14% by taking DNRA into consideration. In a parallel experiment amended with 15NH4+ + 14NO3−, anammox rates were not significantly influenced by DNRA due to the high background of 15NH4+ addition. Excluding measurements in which bioirrigation was present, integrated denitrification rates decreased from 10 to 4 mmol N m−2 d−1 with water depth, while integrated anammox rates increased from 1.5 to 4.0 mmol N m−2 d−1. Consequently, the relative contribution of anammox to the total N-loss increased from 13% at the shallowest site near the Changjiang estuary to 50% at the deepest site on the outer shelf. This study represents the first time in which anammox has been demonstrated to play a significant role in benthic nitrogen cycling in the East China Sea sediment, especially on the outer shelf. N

  15. Sources et marché du sulfate d'ammonium Sources of and Market for Ammonium Sulfate

    Directory of Open Access Journals (Sweden)

    Loussouarn C.

    2006-11-01

    Full Text Available Engrais azoté le plus utilisé dans le monde jusqu'en 1970, le sulfate d'ammonium ne représente plus aujourd'hui que 4 % de la fertilisation azotée. Avec une teneur en azote de 21 % seulement, il a été peu à peu remplacé comme engrais universel par des produits plus concentrés, notamment l'urée et le nitrate d'ammonium. Obtenu pour plus de 40 % comme sous-produit dans la synthèse de monomères comme le caprolactame, l'acrylonitrile ou le méthacrylate de méthyle, et pour près de 10 % dans le traitement des gaz de cokerie, sa production dépend largement des développements du marché des fibres synthétiques, et, dans une moindre mesure, de la sidérurgie et de la métallurgie. Dans les pays développés, où la production est essentiellement fatale, le volume du marché est et sera plus fonction de la disponibilité du sulfate d'ammonium que de la demande ou de facteurs de marché; sa consommation ne résidera plus que dans des applications spécifiques pour lesquelles il sera bien adapté. Par contre, l'intérêt croissant pour compenser le déficit en soufre de certains sols, et les qualités agronomiques propres du sulfate d'ammonium laissent entrevoir la possibilité d'un essor de son utilisation dans certaines régions en voie de développernent. Ammonium sulfate was the most worldwide nitrogenous fertilizer used up to 1970. Today, it makes up only 4% of nitrogenous fertilization. With a nitrogen content of only 21%, it has gradually been replaced as a universal fertilizer by more concentrated products, particularly urea and ammonium nitrate. More than 40% of the ammonium sulfate is obtained as a by-product from the synthesis of monomers such as caprolactam, acrylonitrile or methyl methacrylate, and nearly 10% from coking gas processing. Its production depends extensively on the development of the market for synthetic fibers and, to a lesser extent, on the steel and metallurgical industries. In the industrialized countries

  16. Preparation of nanodispersed titania using stabilized ammonium nitrate melts

    KAUST Repository

    Raciulete, Monica

    2010-10-01

    An expedite one-step approach using simple precursors has been proposed to obtain metallic oxide compounds and exemplified by preparation of highly dispersed TiO2. The technique consists in heating to 400500 °C of molten ammonium nitrate stabilized with an organic nitrogen-containing compound (urea, melamine, ammonium oxalate) and containing dissolved metal salt precursor (TiOCl2). The crystallites of the resulting TiO2 demonstrated variable size and shape as a function of stabilizer used. Their activity in photocatalytic oxidation of formic acid also depends on the nature of the stabilizer. The catalysts as-prepared showed high photocatalytic performance, superior to that of the Degussa P25 reference. Nitrogen containing stabilizers play a double role of increasing the process safety and modifying the properties of the solid products. © 2010 Elsevier Inc. All rights reserved.

  17. Anaerobic ammonium oxidation in a bioreactor treating slaughterhouse wastewater

    Directory of Open Access Journals (Sweden)

    V. Reginatto

    2005-12-01

    Full Text Available Ammonium oxidation was thought to be an exclusively aerobic process; however, as recently described in the literature, it is also possible under anaerobic conditions and this process was named ANAMMOX. This work describes the operation of a system consisting of a denitrifying reactor coupled to a nitrifying reactor used for removal of nitrogen from slaughterhouse wastewater. During operation of the denitrifying reactor an average nitrogen ammonium removal rate of 50 mg/Ld was observed. This biomass was used to seed a second reactor, operated in repeated fed batch mode, fed with synthetic medium specific to the growth of bacteria responsible for the ANAMMOX process. The nitrogen loading rate varied between 33 and 67 mgN/Ld and average nitrogen removal was 95% and 40%, respectively. Results of fluorescence in situ hybridization (FISH confirmed the presence of anammox-like microorganisms in the enriched biomass.

  18. Kinetic study of uranium residue dissolution in ammonium carbonate media

    International Nuclear Information System (INIS)

    The purpose of this study was to determine the kinetics of the dissolution of a uranium residue in ammonium carbonate media. The residue is generated in the production of medical isotopes. The effects of parameters, such as varying peroxide and carbonate concentrations, dissolution time as well as temperature on the extraction rate have been separately studied. Results indicate complete dissolution of the residue at 60 deg C, after 30 min, in ammonium carbonate solution enriched with hydrogen peroxide. The yield and rate of uranium extraction were found to increase as a function of both temperature, in the range of 25-60 deg C, and hydrogen peroxide concentration. The extraction process was governed by chemical reaction as the activation energy was found to be 45.5 kJ/mol. The order of reaction with respect to uranium concentration was found to be approximately first order. (author)

  19. Tripolyphosphates of potassium-cadmium and ammonium-cadmium

    International Nuclear Information System (INIS)

    Formation of barely soluble compounds during interaction of ammonium and potassium tripolyphosphates with cadmium nitrate in aqueous solutions (0.1-2.0 mol% concentration, the temperature 20 deg C), is investigated. KCd2P3O10x7H2O, NH4Cd2P3O10x7H2O crystallohydrates and Cd5(P3O10)2xhH2O (x=10-13) X-ray amorphous salt, that are dissolved in potassium and ammonium tripolyphosphate solution with formation of Cd2+:P3O105-=1:1 and 1:2 complexes, are separated. In K5P3O10-Cd(NO3)2-H2O system Cd2+:P3O105-=1:1 complex is crystallized in a mixture with varied composition amorphous phase

  20. Synthesis, antimicrobial activity of lamotrigine and its ammonium derivatives

    Indian Academy of Sciences (India)

    Yong Qian; Peng-Cheng Lv; Lei Shi; Rui-Qin Fang; Zhong-Cheng Song; Hai-Liang Zhu

    2009-07-01

    Antiepileptic drug lamotrigine and its thirteen ammonium salt complexes (4a-4m) were synthesized and characterized by IR, elemental analysis, 1H-NMR, and MS spectral methods. Many of the ammonium salts (4a-4m) were first reported. Furthermore, the crystal structure of compound 3 was determined by single crystal X-ray diffraction analysis. All these complexes were tested in vitro for their antibacterial activity (Bacillus subtilis, Staphylococcus aureus, Enterococus faecalis, Escherichia coli, Pseudomonas aeruginosa and Enterobacter cloacae). The results indicated that most of the complexes showed good antibacterial activity against Gram-positive (B. subtilis, S. aureus and S. faecalis), but showed mild, even inactive against Gram-negative bacterial strains.

  1. Precipitation mechanism of ammonium uranate and relative process selection

    International Nuclear Information System (INIS)

    The paper describes hydrolytic mechanism of uranyl ion, composition and structure of formed ammonium uranates. Investigations show that uranyl hydrolytic complexes as a main form of dinuclear complexes in solution with further hydrolyze to form sub-stable uranyl hydroxide with the oxonium oxygen bond which can react with cation NH4+, existing in solution, by substituting the hydroxyl bridge hydrogens to form ammonium uranates. Virgin thin grain is small and can easily polymerize into a porous particle by absorption of plate to plate, and the later may aggregate into a second aggregation. Transform of F- system into NO3- system, or use of two-steps precipitation, strictly controlled pH value, in order to quicken speed of formation of the virgin grain, an ADU-derived special UO2 powder can be obtained

  2. Recent Advances in the Synthesis of Ammonium-Based Rotaxanes

    Directory of Open Access Journals (Sweden)

    Dominic Thibeault

    2010-05-01

    Full Text Available The number of synthetic methods enabling the preparation of ammonium-based rotaxanes has increased very rapidly in the past ten years. The challenge in the synthesis of rotaxanes results from the rather weak interactions between the ammonium-containing rod and the crown ether macrocycle in the pseudorotaxane structure that rely mostly on O•H hydrogen bonds. Indeed, no strong base or polar solvent that could break up H-bonding can be used during the formation of rotaxanes because the two components will separate as two distinct entities. Moreover, most of the reactions have to be performed at room temperature to favor the formation of pseudorotaxane in solution. These non-trivial prerequisites have been taken into account to develop efficient reaction conditions for the preparation of rotaxanes and those are described in detail along this review.

  3. Pilot scale for preparation of ammonium uranyl carbonate

    International Nuclear Information System (INIS)

    The procedure adopted for obtaining Ammonium Uranyl Carbonate (AUC) from uranium hexafluoride (UF sub(6)) or aqueous solutions of uranylnitrate (UO sub(2)(NO sub(3)) sub(2)) is described in the present work. This procedure involves the precipitation of AUC in a chemical reactor by the addition of gaseous UF sub(6) or solutions of uranylnitrate to NH sub(3) and CO sub(2) gases in a solution containing ammonium bicarbonate, where pH and temperature are controlled. Details regarding the characterization and quality control methods in the preparation of AUC are presented along with their physical and chemical properties. Some informations about effluents generated during the process are presented too. An attempt is made to correlate the parameters involved in the precipitation process of AUC and their characteristics. (author)

  4. Hydrogenation of Tasmanian alginite in the presence of tin (II) chloride and zinc chloride

    Energy Technology Data Exchange (ETDEWEB)

    Russell, N.J.

    1981-10-01

    A Mersey River (Tasmanian) algnite concentrate was heated (3 Cmin$SUP$-$SUP$1 to temperatures of 200-480 C in a small capacity, high-pressure, single-cell differential thermal analysis, batch autoclave under nitrogen or hydrogen (initial pressure 9.8 MPa) with or without 10 wt% zinc chloride or tin (II) chloride. An organic solvent (vehicle) was not used in these experiments. Although there is an almost complete conversion of alginite to gaseous and liquid products between 425 and 450 C, the compositions of the autoclave gas samples, the yields and compositions of the hexane-soluble material derived from the autoclave products, and the optical properties of the hexane-soluble residues, reflect the experimental conditions, in particular the influence of the metal chlorides. Principal phases of hydrogen uptake by alginite occur at different temperatures in a hydrogen atmosphere depending on the presence and nature of the metal chloride. The autoclave gas compositions reveal a clear distinction between the uncatalysed and catalysed experiments. The hydrocarbon gas ratios permit a distinction to be made between catalytic (carbonium ion mechanism) reactions and thermal (free radical mechanism) reactions; at higher temperatures the latter are dominant, even in the catalysed experiments. The metal chlorides lower the organic sulphur and nitrogen contents of the hexane-soluble material; zinc chloride being more effective than tin (II) chloride. Incident light fluorescence microscopy suggests that zinc chloride and tin (II) chloride give rise to different hydrogenation reactions between 300 and 425 C. Incident light fluorescence microscopy is a most useful method of studying the petrography of alignite in the hexane-insoluble residues. (28 refs.)

  5. Intercalation of quaternary ammonium epoxide into montmorillonite structure

    Czech Academy of Sciences Publication Activity Database

    Duchek, P.; Špírková, Milena; Šabata, Stanislav

    Beijing : Chinese Vacuum Society, 2010. s. 109. [International Vacuum Congress /18./, International Conference on Nanoscience and Technology, International Conference on Solid Surfaces /14./, Vacuum and Surface Sciences Conference of Asia and Australia. 23.08.2010-27.08.2010, Beijing] R&D Projects: GA AV ČR(CZ) IAAX08240901 Institutional research plan: CEZ:AV0Z40500505; CEZ:AV0Z40720504 Keywords : montmorillonite * quaternary ammonium epoxide * intercalation Subject RIV: JI - Composite Materials

  6. Ammonium photo-production by heterocytous cyanobacteria: potentials and constraints.

    Science.gov (United States)

    Grizeau, Dominique; Bui, Lan Anh; Dupré, Catherine; Legrand, Jack

    2016-08-01

    Over the last decades, production of microalgae and cyanobacteria has been developed for several applications, including novel foods, cosmetic ingredients and more recently biofuel. The sustainability of these promising developments can be hindered by some constraints, such as water and nutrient footprints. This review surveys data on N2-fixing cyanobacteria for biomass production and ways to induce and improve the excretion of ammonium within cultures under aerobic conditions. The nitrogenase complex is oxygen sensitive. Nevertheless, nitrogen fixation occurs under oxic conditions due to cyanobacteria-specific characteristics. For instance, in some cyanobacteria, the vegetative cell differentiation in heterocyts provides a well-adapted anaerobic microenvironment for nitrogenase protection. Therefore, cell cultures of oxygenic cyanobacteria have been grown in laboratory and pilot photobioreactors (Dasgupta et al., 2010; Fontes et al., 1987; Moreno et al., 2003; Nayak & Das, 2013). Biomass production under diazotrophic conditions has been shown to be controlled by environmental factors such as light intensity, temperature, aeration rate, and inorganic carbon concentration, also, more specifically, by the concentration of dissolved oxygen in the culture medium. Currently, there is little information regarding the production of extracellular ammonium by heterocytous cyanobacteria. This review compares the available data on maximum ammonium concentrations and analyses the specific rate production in cultures grown as free or immobilized filamentous cyanobacteria. Extracellular production of ammonium could be coupled, as suggested by recent research on non-diazotrophic cyanobacteria, to that of other high value metabolites. There is little information available regarding the possibility for using diazotrophic cyanobacteria as cellular factories may be in regard of the constraints due to nitrogen fixation. PMID:25613641

  7. Ammonium Uptake by Phytoplankton Regulates Nitrification in the Sunlit Ocean

    OpenAIRE

    Smith, Jason M.; Chavez, Francisco P.; Francis, Christopher A.

    2014-01-01

    Nitrification, the microbial oxidation of ammonium to nitrate, is a central part of the nitrogen cycle. In the ocean's surface layer, the process alters the distribution of inorganic nitrogen species available to phytoplankton and produces nitrous oxide. A widely held idea among oceanographers is that nitrification is inhibited by light in the ocean. However, recent evidence that the primary organisms involved in nitrification, the ammonia-oxidizing archaea (AOA), are present and active throu...

  8. Nanomodified vermiculite NMV - a new material for recycling ammonium nitrogen

    Science.gov (United States)

    Rama, Miradije; Laiho, Taina; Eklund, Olav; Lehto, Kirsi; Shebanov, Alex; Smått, Jan-Henrik

    2016-04-01

    Vermiculites ((Mg,Fe,Al)3(Al,Si)4O10(OH)24H2O) are naturally occurring minerals from hydromica group with a high cation exchange capacity and large surface area. Since vermiculite is a hydrated mineral, its structure can be changed with heat. In this study vermiculite samples were heated in an oven until the interlayer distance of them diminished from 14 Å to 11.7 Å. This method for improving vermiculites intake of ammonium ions by heating, is an invention made at the University of Turku. Nanomodified vermiculite (NMV) is able to absorb up to 4.7 wt% of ammonium. NMV can be used as an efficient filter and immobilizer of ammonium in different environments. NMV has been efficiently tested on waste water from a biogas plant, human urine, combustion experiments, industrial chimneys, excrements from farms etc. Ammonium doped vermiculite (ADV) is further developed for fertilizer use. Performed experiments have testified the usability of ADV as a fertilizer. At first step the NMV was processed with the reject water from a biogas plant, were it absorbed NH4+ into the lattice. At second, the ADV was used as nutrient source for garden plants. Geraniums and begonias were used as test plants of the work. Plant growth rate was evaluated based on plant weight. Results showed that significant increase of the growth of geraniums and of begonias were observed when comparing to those cultivations where plants have got normal fertilization. Moreover, ADV has been tested as a fertilizer in greenhouse experiments with spruces and pines. After five months, the weight of the plants that had grown in a substrate containing ADV was 10 times the weight of plants growing in the reference substrate.

  9. Alicyclic ammonium ionic liquids as lithium battery electrolytes A review

    OpenAIRE

    Puga, A.V.

    2013-01-01

    Ionic liquids are reasonable alternatives to electrolytes used in energy storage devices, such as lithium batteries, both lithium-ion and lithium-metal, given the safety advantages they provide. This is due to the favourable properties they often possess, mainly non­flammability and non­volatility. Candidates with alicyclic ammonium cations exhibit high electrochemical stabilities, especially towards lithium, a unique feature which enables the fabrication of reversible lithium-metal batteries...

  10. Potassium-strontium amd ammonium-strontium tripolyphosphates

    International Nuclear Information System (INIS)

    Preparation of low-soluble compounds during interaction of potassium and ammonium tripolyphosphates and strontium nitrate in aqueous solutions (0.1-1.0 mol.% concentration, 20 deg C temperature) is investigated. Crystal hydrates KSr2P3O10x7H2O, NH4Sr2P3O10x5H2O and amorphous salt Sr5(P3O10)2xXH2O (X=10-12) are extracted

  11. Anaerobic Ammonium-Oxidizing Bacteria: Unique Microorganisms with Exceptional Properties

    OpenAIRE

    Niftrik, L.A.M.P. van; Jetten, M.S.M.

    2012-01-01

    Summary: Anaerobic ammonium-oxidizing (anammox) bacteria defy many microbiological concepts and share numerous properties with both eukaryotes and archaea. Among their most intriguing characteristics are their compartmentalized cell plan and archaeon-like cell wall. Here we review our current knowledge about anammox cell biology. The anammox cell is divided into three separate compartments by bilayer membranes. The anammox cell consists of (from outside to inside) the cell wall, paryphoplasm,...

  12. Synthesis and characterization of ammonium phosphate fertilizers with boron

    OpenAIRE

    ANGELA MAGDA; RODICA PODE; CORNELIA MUNTEAN; MIHAI MEDELEANU; ALEXANDRU POPA

    2010-01-01

    The concentration of boron, an essential micronutrient for plants, presents a narrow range between deficiency and toxicity. In order to provide the boron requirement for plants, and to avoid toxicity problems, boron compounds are mixed with basic fertilizers. Sodium borate pentahydrate was used as a boron source. Ammonium orthophosphates fertilizers with boron were prepared by neutralizing phosphoric acid with ammonia and addition of variable amounts of sodium tetraborate pentahydrate to the ...

  13. Separation and Recovery of Tetramethyl Ammonium Hydroxide with Zeolitic Adsorbents

    OpenAIRE

    S. Nishihama; Takatori, K.; K. Yoshizuka

    2010-01-01

    Separation and recovery of tetramethyl ammonium hydroxide (TMAH) has been investigated, employing several zeolites as adsorbents. Zeolite X, prepared by using TMAH as a structure directing agent, possesses highest adsorption ability among the adsorbents investigated in the present work, which corresponds to the specific surface area and pore volume of the zeolite. The adsorption amount of TMAH with the zeolitic adsorbents increases with increase in pH value in the aqueous solution, indicating...

  14. Nitrogen loss by anaerobic oxidation of ammonium in rice rhizosphere

    OpenAIRE

    Nie, San'an; Li, Hu; Yang, Xiaoru; Zhang, Zhaoji; Weng, Bosen; Huang, Fuyi; Zhu, Gui-Bing; Zhu, Yong-Guan

    2015-01-01

    Anaerobic oxidation of ammonium (anammox) is recognized as an important process for nitrogen (N) cycling, yet its role in agricultural ecosystems, which are intensively fertilized, remains unclear. In this study, we investigated the presence, activity, functional gene abundance and role of anammox bacteria in rhizosphere and non-rhizosphere paddy soils using catalyzed reporter deposition–fluorescence in situ hybridization, isotope-tracing technique, quantitative PCR assay and 16S rRNA gene cl...

  15. Development of antibacterial quaternary ammonium silane coatings on polyurethane catheters

    Czech Academy of Sciences Publication Activity Database

    Zanini, S.; Polissi, A.; Maccagni, E.A.; Dell'Orto, E.C.; Liberatore, Chiara; Riccardi, C.

    2015-01-01

    Roč. 451, Aug (2015), 78-84. ISSN 0021-9797 R&D Projects: GA MŠk EE2.3.20.0143 Grant ostatní: OP VK 6(XE) CZ.1.07/2.3.00/20.0143 Institutional support: RVO:68378271 Keywords : plasma-induced graft-polymerization * acrylic acid * ATR/FTIR * AFM * quaternary ammonium silane * Escherichia coli Subject RIV: BH - Optics, Masers, Lasers Impact factor: 3.368, year: 2014

  16. ITP determination of potassium and ammonium in fertilizers and silage

    Czech Academy of Sciences Publication Activity Database

    Nováková, Michaela; Křivánková, Ludmila; Skalická, I.; Bartoš, M.; Vytřas, K.

    2008-01-01

    Roč. 67, Suppl. (2008), S63-S68. ISSN 0009-5893. [Advances in Chromatography and Electrophoresis 2007 and Chiranal 2007. Olomouc, 24.06.2007-27.06.2007] R&D Projects: GA ČR GA203/05/2106; GA AV ČR IAA400310703 Institutional research plan: CEZ:AV0Z40310501 Keywords : capillary electrophoresis * ammonium * potassium Subject RIV: CB - Analytical Chemistry, Separation Impact factor: 1.312, year: 2008

  17. Method for preparation of melts of alkali metal chlorides with highly volatile polyvalent metal chlorides

    International Nuclear Information System (INIS)

    A method for production of alkali metal (Cs, Rb, K) chloride melts with highly volatile polyvalent metal chlorides is suggested. The method consists, in saturation of alkali metal chlorides, preheated to the melting point, by volatile component vapours (titanium tetrachloride, molybdenum or tantalum pentachloride) in proportion, corresponding to the composition reguired. The saturation is realized in an evacuated vessel with two heating areas for 1-1.5 h. After gradual levelling of temperature in both areas the product is rapidly cooled. 1 fig.; 1 tab

  18. Study of stripping cristallization processus of AUC with ammonium carbonate

    International Nuclear Information System (INIS)

    This study is concerned with direct crystallization of ammonium uranyl carbonate (AUC) from a uranium loaded organic phase (30% TBP in kerosene), with ammonium carbonate (NH4)2CO3. The effects of operating conditions ((NH4)2CO3 concentration, flow-ratio, residence time, temperature) on the physical properties of AUC crystals (particle size distribution, specific surface, density...) are reported. All products were identified (both by chemical analysis, X-Ray diffraction) as being ammonium uranyl carbonate crystals (AUC). The results show that a high phase ratio and (NH4)2CO3 concentration favor the formation of fine AUC grains and aggregates. This is due mainly to the high concentration of NH+4 in the system which leads to a high solution supersaturation and consequently to a rapid formation rate of crystal (germination). The reverse phenomenon is observed at low phase ratio and (NH4)2CO3 concentration, where germination and crystal growth are slow and the product is mainly monocrystal. In the intermediate range, a mixture of polycrystal and aggregates is obtained. Residence and temperature are also shown to have an effect on the processes (the effect of time being more important than temperature). In the course of this study a bench-scale stripper-crystallizer was developped and operated successfully. (author). tables, graphs

  19. Extraction Factor Of Pure Ammonium Paratungstate From Tungsten Scraps

    Directory of Open Access Journals (Sweden)

    Pee J.-H.

    2015-06-01

    Full Text Available Typical oxidation process of tungsten scraps was modified by the rotary kiln with oxygen burner to increase the oxidation rate of tungsten scraps. Also to accelerate the solubility of solid oxidized products, the hydrothermal reflux method was adapted. By heating tungsten scraps in rotary kiln with oxygen burner at around 900° for 2hrs, the scraps was oxidized completely. Then oxidized products (WO3 and CoWO4 was fully dissolved in the solution of NaOH by hydrothermal reflux method at 150° for 2hrs. The dissolution rate of oxidized products was increased with increasing the reaction temperature and concentration of NaOH. And then CaWO4 and H2WO4 could be generated from the aqueous sodium tungstate solution. Ammonium paratungstate (APT also could be produced from tungstic acid using by aqueous ammonium solution. The morphologies (cubic and plate types of APT was controlled by the stirring process of purified solution of ammonium paratungstate.

  20. Ammonium and potassium effect on nitrate assimilation in cucumber seedlings

    Directory of Open Access Journals (Sweden)

    J. Buczek

    2015-05-01

    Full Text Available The effect of ammonium present in the induction medium toghether with nitrate on the activity of nitrate reductase (NR, nitrite reductase (NiR, glutamic acid dehydrogenase (GDH and absorption and accumulation of NO3- in cucumber seedlings were investigated. Maximum NR and NiR activity in the cotyledons was observed when seedlings were supplied with KNO3 as the sole source of nitrogen. When plants were supplied with NH4NO3 the presence of NH4+ in the induction medium repressed by about 50 per cent the activity of both reductases in the cotyledons. Addition of K+ to this medium abolished completely the inhibitory effect of NH4+. The effect of K+ cannot be replaced by that Na+ ions. On the other hand, ammonium has no effect on the level of NR activity in roots, while NiR was almost completely repressed. Under the experimental conditions ammonium, in the presence of nitrates, decreased the activity of GDH, but this diminution did not occur when the plants were supplied with K+ simultaneously. It has found that NH4+ ions reduced NO3- absorption but at the same time, the ratio of NO3- absorbed to that reduced was increased more than twice. The presumable mechanism of these phenomena is discussed.

  1. Increasing wheat production while decreasing nitrogen losses from ammonium bicarbonate

    International Nuclear Information System (INIS)

    The objectives of a 4-year field experiment were i) to investigate the effects of rate and timing of application of ammonium bicarbonate on N-uptake efficiency by irrigated winter wheat, ii) to determine the fate of fertilizer N in wheat followed by maize, and iii) to study nitrate dynamics in the soil after N-fertilizer application to evaluate groundwater pollution by leaching. Nitrogen-application rates significantly affected wheat grain yields and straw dry matter. Grain yields were higher with 150 than with 225 kg N ha-1, whereas the highest fractional recoveries of N from ammonium bicarbonate occurred with 75 kg N ha-1 (38.5% in 1994-95 and 33.5% in 1996-97). On the basis of grain yield, N recovery and soil-N balance, ammonium bicarbonate at 150 kg N ha-1, was the optimum rate, when applied basally and as a top dressing to wheat. Subsequent yields of maize stover and grain were affected by N applied to the wheat, suggesting that fertilizer recommendations, in terms of rate and timing, should be made on the basis of effects on the cropping rotation as a whole. Water-holding capacity of the soil was poor, therefore large applications of N are likely to cause nitrate pollution of ground water. (author)

  2. Structural basis for Mep2 ammonium transceptor activation by phosphorylation

    Science.gov (United States)

    van den Berg, Bert; Chembath, Anupama; Jefferies, Damien; Basle, Arnaud; Khalid, Syma; Rutherford, Julian C.

    2016-01-01

    Mep2 proteins are fungal transceptors that play an important role as ammonium sensors in fungal development. Mep2 activity is tightly regulated by phosphorylation, but how this is achieved at the molecular level is not clear. Here we report X-ray crystal structures of the Mep2 orthologues from Saccharomyces cerevisiae and Candida albicans and show that under nitrogen-sufficient conditions the transporters are not phosphorylated and present in closed, inactive conformations. Relative to the open bacterial ammonium transporters, non-phosphorylated Mep2 exhibits shifts in cytoplasmic loops and the C-terminal region (CTR) to occlude the cytoplasmic exit of the channel and to interact with His2 of the twin-His motif. The phosphorylation site in the CTR is solvent accessible and located in a negatively charged pocket ∼30 Å away from the channel exit. The crystal structure of phosphorylation-mimicking Mep2 variants from C. albicans show large conformational changes in a conserved and functionally important region of the CTR. The results allow us to propose a model for regulation of eukaryotic ammonium transport by phosphorylation. PMID:27088325

  3. 加氢空冷系统氯化铵沉积多场耦合模型及数值模拟%Multi-Physical Field Coupling Models and Numerical Simulation of Ammonium Salt Deposition

    Institute of Scientific and Technical Information of China (English)

    偶国富; 金浩哲; 曹晶; 谢浩平

    2011-01-01

    通过分析铵盐在加氢空冷管束内的结晶沉积过程,构建流动场、温度场和浓度场耦合作用下的铵盐沉积计算模型,并结合有限元法对氯化铵盐的流动沉积过程进行了数值模拟.研究结果表明:铵盐流动沉积是一个多物理场耦合的过程,典型工况下加氢空冷系统中氯化铵最大沉积量位于距管束入口0.98m处.该数值模拟方法可有效预测实际空冷器管束入口铵盐沉积失效危险区域.%By analyzing the process of ammonium salt crystallization and deposition in hydroprocessing air cooler tubes, the ammonium salt deposition and mathematical models of the flow field, temperature field and concentration field coupling are established. A finite element method is used for the numerical simulation of ammonium chloride deposition process. Based on the study, the anthors suggest that the process of ammonium salt deposition may be affected by multi-physical field coupling. As the result of the simulation, the position with maxium deposition amount of ammonium salt is 0. 98m away from the tube entrance in the air cooler system. Compared with actual failure instances, this method can be used effectively in predicting the relative severity of ammonium salt corrosion in hydroprocessing air cooler tubes.

  4. Process optimization of rare earth and aluminum leaching from weathered crust elution-deposited rare earth ore with compound ammonium salts

    Institute of Scientific and Technical Information of China (English)

    何正艳; 张臻悦; 余军霞; 徐志高; 池汝安

    2016-01-01

    In order to intensify the leaching process of rare earth (RE) and reduce the impurities in the leachate, ammonium chloride (NH4Cl) and ammonium nitrate (NH4NO3) were mixed as a compound leaching agent to treat the weathered crust elution-deposited RE ore. Effects of molar ratio of NH4Cl and NH4NO3, ammonium (NH4+) concentration, leaching agent pH and flow rate on the leaching process of RE were studied and evaluated by the chromatographic plate theory. Leaching process of the main impurity alu-minium (Al) was also discussed in detail. Results showed that a higher initial ammonium concentration in a certain range could en-hance the mass transfer process of RE and Al by providing a driving force to overcome the resistance of diffusion. pH almost had no effects on the mass transfer efficiency of RE and Al in the range of 4 to 8. The relationship between the flow rate and height equiva-lent to a theoretical plate (HETP) could fit well with the Van Deemter equation, and the flow rate at the lowest HETP was determined. The optimum conditions of column leaching for RE and Al were 1:1 (molar ratio) of NH4Cl and NH4NO3, 0.2 mol/L of ammonium concentration, pH 4–8 of leaching agent and 0.5 mL/min of flow rate. Under this condition, the mass transfer efficiency of RE was improved, but no change was observed for Al compared with the most widely used ammonium sulfate. Moreover, the significant dif-ference value (around 20 mL) of retention volume at the peak concentration between RE and Al provided a possibility for their sepa-ration. It suggested the potential application of the novel compound leaching agent (NH4Cl/NH4NO3). It was found that the relative concentration of RE in the leachate could be easily obtained by monitoring the pH of leachate.

  5. Oral cadmium chloride intoxication in mice

    DEFF Research Database (Denmark)

    Andersen, O; Nielsen, J B; Svendsen, P

    1988-01-01

    Diethyldithiocarbamate (DDC) is known to alleviate acute toxicity due to injection of cadmium salts. However, when cadmium chloride was administered by the oral route, DDC enhanced rather than alleviated the acute toxicity; both oral and intraperitoneal (i.p.) administration of DDC had this effec...

  6. Liquid crystalline critical dynamics in decylammonium chloride

    CERN Document Server

    Lee, K W; Lee, C E; Kang, K H; Rhee, C; Kang, J K

    1999-01-01

    Collective chain dynamics and phase transitions in a model biomembrane, decylammonium chloride (C sub 1 sub 0 H sub 2 sub 1 NH sub 3 Cl), were studied by means of proton nuclear magnetic resonance. Our measurements sensitively reflect the critical dynamics associated with the smectic C to smectic A transition of the lipid bilayer.

  7. Liquid crystalline critical dynamics in decylammonium chloride

    International Nuclear Information System (INIS)

    Collective chain dynamics and phase transitions in a model biomembrane, decylammonium chloride (C10H21NH3Cl), were studied by means of proton nuclear magnetic resonance. Our measurements sensitively reflect the critical dynamics associated with the smectic C to smectic A transition of the lipid bilayer

  8. Chloride diffusion in partially saturated cementitious material

    DEFF Research Database (Denmark)

    Nielsen, Erik Pram; Geiker, Mette Rica

    2003-01-01

    The paper proposes a combined application of composite theory and Powers' model for microstructural development for the estimation of the diffusion coefficient as a function of the moisture content of a defect-free cementitious material. Measurements of chloride diffusion in mortar samples (440 kg...

  9. 75 FR 19657 - Barium Chloride From China

    Science.gov (United States)

    2010-04-15

    ... Commission found that the domestic interested party group response to its notice of institution (74 FR 31757... COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION: Notice of Commission determination to conduct a full five-year review concerning the antidumping duty order on...

  10. 75 FR 20625 - Barium Chloride From China

    Science.gov (United States)

    2010-04-20

    ... established a schedule for the conduct of this review (74 FR 62587, November 30, 2010). Subsequently, counsel... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION:...

  11. Chloride concentration affects soil microbial community

    Czech Academy of Sciences Publication Activity Database

    Gryndler, Milan; Rohlenová, Jana; Kopecký, Jan; Matucha, Miroslav

    2008-01-01

    Roč. 71, č. 7 (2008), s. 1401-1408. ISSN 0045-6535 R&D Projects: GA ČR GA526/05/0636 Institutional research plan: CEZ:AV0Z50200510; CEZ:AV0Z50380511 Keywords : soil chloride * terminal restriction fragments * soil microorganisms Subject RIV: EE - Microbiology, Virology Impact factor: 3.054, year: 2008

  12. Determination of chloride in uranium solutions

    Energy Technology Data Exchange (ETDEWEB)

    Danse, A.; Stoch, H.; Steele, T.W.

    1967-05-15

    Thiocyanate is first removed by precipitation with a small excess of a copper solution, and the cations are removed by passing the filtrate through a cation-exchange resin. The chloride is determined in the eluate by a potentiometric titration in which silver nitrate solution is used.

  13. Amperometric Sensor for Detection of Chloride Ions

    Directory of Open Access Journals (Sweden)

    Rene Kizek

    2008-09-01

    Full Text Available Chloride ion sensing is important in many fields such as clinical diagnosis, environmental monitoring and industrial applications. We have measured chloride ions at a carbon paste electrode (CPE and at a CPE modified with solid AgNO3, a solution of AgNO3 and/or solid silver particles. Detection limits (3 S/N for chloride ions were 100 μM, 100 μM and 10 μM for solid AgNO3, solution of AgNO3 and/or solid silver particles, respectively. The CPE modified with silver particles is the most sensitive to the presence chloride ions. After that we approached to the miniaturization of the whole electrochemical instrument. Measurements were carried out on miniaturized instrument consisting of a potentiostat with dimensions 35 × 166 × 125 mm, screen printed electrodes, a peristaltic pump and a PC with control software. Under the most suitable experimental conditions (Britton-Robinson buffer, pH 1.8 and working electrode potential 550 mV we estimated the limit of detection (3 S/N as 500 nM.

  14. Polyvinyl chloride filled with bismuth oxychloride powder

    Czech Academy of Sciences Publication Activity Database

    Polášková, M.; Sedláček, T.; Kharlamov, Alexander; Pivokonský, Radek; Saha, P.

    Larnaca : Polymer Processing Society, 2009, s. 242. [Polymer Processing Society Europe/Africa Regional Meeting. Larnaca (GR), 18.10.2009-21.10.2009] Institutional research plan: CEZ:AV0Z20600510 Keywords : olyvinyl chloride * bismuth oxychloride * radiopaque agents Subject RIV: BK - Fluid Dynamics

  15. Regulated trafficking of the CFTR chloride channel

    NARCIS (Netherlands)

    Braakman, L.J.; Kleizen, B.; Jonge, H.R. de

    2000-01-01

    The cystic fibrosis transmembrane conductance regulator (CFTR), the ABC transporter encoded by the cystic fibrosis gene, is localized in the apical membrane of epithelial cells where it functions as a cyclic AMP-regulated chloride channel and as a regulator of other ion channels and transporters. Wh

  16. Binary nucleation of water and sodium chloride

    Czech Academy of Sciences Publication Activity Database

    Němec, Tomáš; Maršík, František; Palmer, A.

    2006-01-01

    Roč. 124, č. 4 (2006), 0445091-0445096. ISSN 0021-9606 R&D Projects: GA ČR(CZ) GA101/05/2536 Institutional research plan: CEZ:AV0Z20760514 Keywords : binary nucleation * sodium chloride * water Subject RIV: BJ - Thermodynamics Impact factor: 3.166, year: 2006

  17. 21 CFR 184.1446 - Manganese chloride.

    Science.gov (United States)

    2010-04-01

    ..., and crystallized. (b) The ingredient meets the specifications of the Food Chemicals Codex, 3d Ed... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Manganese chloride. 184.1446 Section 184.1446 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) FOOD...

  18. The Comparison of Ammonium or Nitrate-Grown Lettuce and Spinach in a Hydroponic System

    Directory of Open Access Journals (Sweden)

    H. R. Roosta

    2010-06-01

    Full Text Available Most plant species are sensitive to high ammonium concentrations. In this experiment the sensitivity of lettuce and spinach to ammonium was investigated. In a factorial experiment with framework of a completely randomized design with two factors, nitrogen form (ammonium and nitrate and plant species (lettuce and spinach, and three replications seeds were germinated in a mixture of perlite, sand and clay in soil-maid pots. After two weeks, the seedlings at two true-leaf stage were then transferred to buckets containing 4 L of aerated nutrient solution. The four plants were growing together. The treatments were ammonium and nitrate at 5 mM. In comparison to nitrate, ammonium reduced the growth of both species. Concentration of K, Mg, and Na decreased with ammonium in both species. The reduction of K and Mg concentrations in ammonium-fed plants may have a role in ammonium toxicity. Ammonium nutrition of both species caused an increase in P at roots and shoots. Higher P content at ammonium-fed lettuce and spinach plants may be due to creation of cations and anions balance in plants. Chlorophyll a and b were higher in ammonium-fed than nitrate-fed plants.

  19. Preparation of hydrophilic vinyl chloride copolymer hollow fiber membranes with antifouling properties

    Science.gov (United States)

    Rajabzadeh, Saeid; Sano, Rie; Ishigami, Toru; Kakihana, Yuriko; Ohmukai, Yoshikage; Matsuyama, Hideto

    2015-01-01

    Hydrophilic vinyl chloride copolymer hollow fiber membranes with antifouling properties were prepared from brominated vinyl chloride-hydroxyethyl methacrylate copolymer (poly(VC-co-HEMA-Br)). The base membrane was grafted with two different zwitterionic monomers, (2-methacryloyloxyethylphosphorylcholine) (MPC) and [2-(methacryloyloxy) ethyl] dimethyl (3-sulfopropyl) ammonium hydroxide) (MEDSAH), and poly(ethylene glycol) methyl ether methacrylate (PEGMA). The effect of the grafting on the base membrane hydrophilicity and antifouling properties was investigated. For comparison of the results, the pure water permeabilities and pore sizes at the outer surfaces of the grafted hollow fiber membranes were controlled to be similar. A poly(VC-co-HEMA-Br) hollow fiber membrane with similar pure water permeability and pore size was also prepared as a control membrane. A BSA solution was used as a model fouling solution for evaluation of the antifouling properties. Grafting with zwitterionic monomers and PEGMA improved the antifouling properties compared with the control membrane. The PEGMA grafted membrane showed the best antifouling properties among the grafted membranes

  20. Concurrence of Anaerobic Ammonium Oxidation and Organotrophic Denitrification in Presence of p-Cresol.

    Science.gov (United States)

    González-Blanco, G; Cervantes, F J; Beristain-Cardoso, R; Gómez, J

    2015-08-01

    This study was carried out to evaluate the capacity of anaerobic granular sludge for oxidizing ammonium and p-cresol with nitrate as terminal electron acceptor. Kinetics for the anaerobic oxidation of ammonium and p-cresol is described in this paper. The phenolic compound was very efficiently consumed, achieving 65 % of mineralization. Ammonium and nitrate were also consumed at 83 and 92 %, respectively, being the main product N2. Anaerobic ammonium oxidation was promoted owing to accumulation of nitrite, and it allowed the synergy of anaerobic ammonium oxidation and organotrophic denitrification for the simultaneous removal of ammonium, nitrate, and p-cresol. A carbonaceous intermediate partially identified was transiently accumulated, and it transitorily truncated the respiratory process of denitrification. These experimental results might be considered for defining strategies in order to remove nitrate, ammonium, and phenolic compounds from wastewaters. PMID:26062920

  1. Effects of particle size and chain length on flotation of quaternary ammonium salts onto kaolinite

    Science.gov (United States)

    Longhua, Xu; Yuehua, Hu; Faqin, Dong; Hao, Jiang; Houqin, Wu; Zhen, Wang; Ruohua, Liu

    2015-06-01

    Effects of particle size and chain length on flotation of quaternary ammonium salts (QAS) onto kaolinite have been investigated by flotation tests. Dodecyltrimethylammonium chloride (DTAC) and cetyltrimethylammonium chloride (CTAC) were used as collectors for kaolinite in different particle size fractions (0.075 ~ 0.01 mm, 0.045 ~ 0.075 mm, 0 ~ 0.045 mm). The anomalous flotation behavior of kaolinite have been further explained based on crystal structure considerations by adsorption tests and molecular dynamics (MD) simulation. The results show that the flotation recovery of kaolinite in all different particle size fractions decreases with an increase in pH. As the concentration of collectors increases, the flotation recovery increases. The longer the carbon chain of QAS is, the higher the recoveries of coarse kaolinite (0.075 ~ 0.01 mm and 0.045 ~ 0.075 mm) are. But the flotation recovery of the finest kaolinite (0 ~ 0.045 mm) decreases with chain lengths of QAS collectors increasing, which is consistent with the flotation results of unscreened kaolinite (0 ~ 0.075 mm). It is explained by the froth stability related to the residual concentration of QAS collector in mineral pulp. In lower residual concentration, the froth stability becomes worse. Within the range of flotation collector concentration, it's easy of CTAC to be completely adsorbed by kaolinite in the particle size fraction (0-0.045 mm), which led to lower flotation recovery. Moreover, it is interesting that the coarser particle size of kaolinite is, the higher flotation recovery is. The anomalous flotation behavior of kaolinite is rationalized based on crystal structure considerations. The results of MD simulations show that the (001) kaolinite surface has the strongest interaction with DTAC, compared with the (00 1) face, (010) and (110) edges. On the other hand, when particle size of kaolinite is altered, the number of basal planes and edge planes is changed. It is observed that the finer kaolinite

  2. Hydrolysis of ferric chloride in solution

    Energy Technology Data Exchange (ETDEWEB)

    Lussiez, G.; Beckstead, L.

    1996-11-01

    The Detox{trademark} process uses concentrated ferric chloride and small amounts of catalysts to oxidize organic compounds. It is under consideration for oxidizing transuranic organic wastes. Although the solution is reused extensively, at some point it will reach the acceptable limit of radioactivity or maximum solubility of the radioisotopes. This solution could be cemented, but the volume would be increased substantially because of the poor compatibility of chlorides and cement. A process has been developed that recovers the chloride ions as HCl and either minimizes the volume of radioactive waste or permits recycling of the radioactive chlorides. The process involves a two-step hydrolysis at atmospheric pressure, or preferably under a slight vacuum, and relatively low temperature, about 200{degrees}C. During the first step of the process, hydrolysis occurs according to the reaction below: FeCl{sub 3 liquid} + H{sub 2}O {r_arrow} FeOCl{sub solid} + 2 HCl{sub gas} During the second step, the hot, solid, iron oxychloride is sprayed with water or placed in contact with steam, and hydrolysis proceeds to the iron oxide according to the following reaction: 2 FeOCl{sub solid} + H{sub 2}O {r_arrow} Fe{sub 2}O{sub 3 solid} + 2 HCl{sub gas}. The iron oxide, which contains radioisotopes, can then be disposed of by cementation or encapsulation. Alternately, these chlorides can be washed off of the solids and can then either be recycled or disposed of in some other way.

  3. Avaliação da estabilidade térmica de sais quaternários de amônio para uso em argilas organofílicas nacionais: Parte I Evaluation of thermal stability of quaternary ammonium salts for use in national organoclays: Part I

    Directory of Open Access Journals (Sweden)

    R. Barbosa

    2010-12-01

    Full Text Available A grande propagação da nanotecnologia nos tempos atuais requer estudos cada vez mais específicos para entender a evolução desses materiais. A obtenção de boas propriedades em nanocompósitos polímero/argila faz com que estudos mais aprofundados sejam realizados sobre a estabilidade térmica dos surfactantes nas temperaturas de processamento destes materiais. Neste trabalho, a estabilidade térmica de quatro sais quaternários de amônio, tais como brometo de hexadeciltrimetil amônio, cloreto de alquildimetilbenzil amônio, cloreto de estearildimetil amônio e cloreto de hexadeciltrimetil amônio foi avaliada, visando sua posterior intercalação em argilas bentoníticas nacionais, com o propósito de torná-las organofílicas para uso em nanocompósitos poliméricos. Os sais foram caracterizados termicamente por calorimetria exploratória diferencial e termogravimetria sob Ar e N2. Os resultados indicaram que os sais à base do ânion cloreto se degradaram em temperaturas similares e o sal à base do ânion brometo se degradou em temperatura superior. Além disso, este estudo indicou que o sal cloreto de estearildimetil amônio provavelmente terá sucesso na utilização como surfactante para o uso em nanocompósitos.The large propagation of nanotechnology in modern times requires more studies to meet their specific development. For obtaining good properties of polymer/clay nanocomposites more comprehensive studies on the thermal stability of surfactants in the processing temperatures of these materials are necessary. In this work, the thermal stability of four quaternary ammonium salts such as hexadecyltrimethyl ammonium bromide, alkyldimethylbenzyl ammonium chloride, esthearildimethyl ammonium chloride and hexadecyltrimethyl ammonium chloride was evaluated for their intercalation into national bentonite clay, with the aim to enable organophilic for using in polymer nanocomposites. The salts were thermally characterized by differential

  4. Viscosity and density tables of sodium chloride solutions

    Energy Technology Data Exchange (ETDEWEB)

    Fair, J.A.; Ozbek, H. (comps.)

    1977-04-01

    A file is presented containing tabulated data extracted from the scientific literature on the density and viscosity of aqueous sodium chloride solutions. Also included is a bibliography of the properties of aqueous sodium chloride solutions. (MHR)

  5. A hybridization approach to efficient TiO{sub 2} photodegradation of aqueous benzalkonium chloride

    Energy Technology Data Exchange (ETDEWEB)

    Suchithra, Padmajan Sasikala, E-mail: schithraps@gmail.com [Research group of Applied and Analytical Chemistry, University Hasselt, Agoralaan, Gebouw D, BE-3590 Diepenbeek (Belgium); Carleer, Robert [Research group of Applied and Analytical Chemistry, University Hasselt, Agoralaan, Gebouw D, BE-3590 Diepenbeek (Belgium); Ananthakumar, Solaippan [Materials Science and Technology Division, National Institute for Interdisciplinary Science and Technology (CSIR), Trivandrum 695019 (India); Yperman, Jan, E-mail: jan.yperman@uhasselt.be [Research group of Applied and Analytical Chemistry, University Hasselt, Agoralaan, Gebouw D, BE-3590 Diepenbeek (Belgium)

    2015-08-15

    Graphical abstract: Hybridization of AC onto TiO{sub 2} tends the catalyst surface negatively charged besides providing highly favorable adsorptions sites for cationic surfactants. The photodegradation of benzalkonium chloride (BKC) is investigated. - Highlights: • Activated carbon-TiO{sub 2} composite (ACT) surface tends negative upon UV irradiation. • ACT effectively photodegrade cationic surfactant benzalkonium chloride (BKC). • Optimum pH for UV-photodegradation of BKC is 8 to 9 and reaction time is 2 h. • Aromatic moiety of BKC is degraded faster than long alkyl chain. • UV–vis spectroscopy is sensitive to detect aqueous BKC from 1 μg/mL. - Abstract: TiO{sub 2} get positively charged upon UV-irradiation and repel the cationic pollutants away from the surface. Hybridization of AC onto TiO{sub 2} (ACT) tends catalyst surface negatively charged besides providing highly favorable adsorptions sites for cationic pollutants. The photodegradation of benzalkonium chloride (BKC), a quaternary ammonium surfactant and a pharmaceutical, is investigated with ACT. The surface charge of the catalyst in surfactant and non-surfactant aqueous dispersion under UV-irradiation is investigated and explained. The anomalous increase in COD values at the beginning of BKC-photodegradation is explained. The intermediate products formed are identified in both solution and solid phase. Trace amount of dodecane remained adsorbed on the catalyst surface after 1 h UV-irradiation, but complete mineralization of BKC is achieved with 2 h UV-irradiation. We propose that BKC photodegradation starts by central fission of benzyl C−N bond followed by dealkylation, and demethylation steps.

  6. A hybridization approach to efficient TiO2 photodegradation of aqueous benzalkonium chloride

    International Nuclear Information System (INIS)

    Graphical abstract: Hybridization of AC onto TiO2 tends the catalyst surface negatively charged besides providing highly favorable adsorptions sites for cationic surfactants. The photodegradation of benzalkonium chloride (BKC) is investigated. - Highlights: • Activated carbon-TiO2 composite (ACT) surface tends negative upon UV irradiation. • ACT effectively photodegrade cationic surfactant benzalkonium chloride (BKC). • Optimum pH for UV-photodegradation of BKC is 8 to 9 and reaction time is 2 h. • Aromatic moiety of BKC is degraded faster than long alkyl chain. • UV–vis spectroscopy is sensitive to detect aqueous BKC from 1 μg/mL. - Abstract: TiO2 get positively charged upon UV-irradiation and repel the cationic pollutants away from the surface. Hybridization of AC onto TiO2 (ACT) tends catalyst surface negatively charged besides providing highly favorable adsorptions sites for cationic pollutants. The photodegradation of benzalkonium chloride (BKC), a quaternary ammonium surfactant and a pharmaceutical, is investigated with ACT. The surface charge of the catalyst in surfactant and non-surfactant aqueous dispersion under UV-irradiation is investigated and explained. The anomalous increase in COD values at the beginning of BKC-photodegradation is explained. The intermediate products formed are identified in both solution and solid phase. Trace amount of dodecane remained adsorbed on the catalyst surface after 1 h UV-irradiation, but complete mineralization of BKC is achieved with 2 h UV-irradiation. We propose that BKC photodegradation starts by central fission of benzyl C−N bond followed by dealkylation, and demethylation steps

  7. EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids (CEF); Flavouring Group Evaluation 46, Revision 1 (FGE.46Rev1): Ammonia and three ammonium salts from chemical group 30

    DEFF Research Database (Denmark)

    Larsen, John Christian; Nørby, Karin Kristiane; Beltoft, Vibe Meister;

    The Scientific Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids (the Panel) was asked to provide scientific advice to the Commission on the implications for human health of chemically defined flavouring substances used in or on foodstuffs in the Member States. In particular...... Regulation (EC) No 1565/2000. The present Flavouring Group Evaluation deals with ammonia [FL-no: 16.009], and three ammonia salts (diammonium sulphide [FL-no: 16.002], ammonium chloride [FL-no: 16.048] and ammonium hydrogen sulphide [FL-no: 16.059]). The flavouring substances cannot exist as geometrical or...... a wide range of food items up to very high amounts. Hydrogen sulphide is also reported to occur naturally in a wide range of food items. In its evaluation, the Panel as a default used the “Maximised Survey-derived Daily Intake” (MSDI) approach to estimate the per capita intakes of the flavouring...

  8. Removal of iron contaminant from zirconium chloride solution

    International Nuclear Information System (INIS)

    This patent describes a process for eliminating iron contaminant from an aqueous zirconium chloride solution that has been contaminated with FeCl3 in a plant in which zirconium and hafnium chloride solutions are separated by a main MINK solvent extraction system and the FeCl3 is normally removed from the zirconium chloride solution by a secondary MINK solvent extraction system

  9. Kinetics of Vinyl Chloride Polymerization with Mixture of Initiators

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Kinetic models for the rate constants of vinyl chloride polymerization in the presence of initiator mixtures were proposed. They may be used to design the initiator recipes for the vinyl chloride polymerization with uniform rate at different temperatures at which various grades of poly(vinyl chloride) will be prepared.

  10. Start-up of simultaneous removal of ammonium and sulfate from an anaerobic ammonium oxidation (anammox) process in an anaerobic up-flow bioreactor

    International Nuclear Information System (INIS)

    A laboratory testing of simultaneous removal of ammonium and sulfate (SRAS) was studied from an anammox process in an anaerobic bioreactor filled with granular activated carbon. Two different phases of experiment were investigated to start up the SRAS process, and final batch tests were performed to analyze the SRAS process. The experiment included an anammox process and an SRAS process. During the anammox process, the highest removal efficiency of ammonium and nitrite was up to 97 and 98%, respectively. After 160 days in the stationary phase of anammox process, the ratio of ammonium to nitrite consumption was approximately 1:1.15, which is much higher than 1:1.32 in the traditional anammox process. The extra electron acceptor, such as sulfate, was thought to react with ammonium by bacteria. Synthetic wastewater containing ammonium chlorine and sodium sulfate was used as the feed for the bioreactor in the second phase of experiment. During the SRAS process, the influent concentrations of ammonium and sulfate were controlled to be 50-60 and 210-240 mg L-1 respectively. After start-up and acclimatization of this process for 60 days, the average effluent concentrations of ammonium and sulfate were 30 and 160 mg L-1, respectively. The simultaneous ammonium and sulfate removal was detected in the reactor. In order to further validate the biochemical interaction between ammonium and sulfate, batch tests was carried out. Abiotic tests were carried out to demonstrate that the pure chemical action between ammonium and sulfate without microorganism was not possible. Biotic assays with different ammonium and sulfate concentrations were further investigated that high concentrations of ammonium and sulfate could promote simultaneous removal of ammonium and sulfate. And elemental sulfur and nitrogen gas as the products measured in the SRAS process helped to demonstrate the occurrence of new interaction between nitrogen and sulfur. The new process of SRAS in the inorganic

  11. Effects of anodic potential and chloride ion on overall reactivity in electrochemical reactors designed for solar-powered wastewater treatment.

    Science.gov (United States)

    Cho, Kangwoo; Qu, Yan; Kwon, Daejung; Zhang, Hao; Cid, Clément A; Aryanfar, Asghar; Hoffmann, Michael R

    2014-02-18

    We have investigated electrochemical treatment of real domestic wastewater coupled with simultaneous production of molecular H2 as useful byproduct. The electrolysis cells employ multilayer semiconductor anodes with electroactive bismuth-doped TiO2 functionalities and stainless steel cathodes. DC-powered laboratory-scale electrolysis experiments were performed under static anodic potentials (+2.2 or +3.0 V NHE) using domestic wastewater samples, with added chloride ion in variable concentrations. Greater than 95% reductions in chemical oxygen demand (COD) and ammonium ion were achieved within 6 h. In addition, we experimentally determined a decreasing overall reactivity of reactive chlorine species toward COD with an increasing chloride ion concentration under chlorine radicals (Cl·, Cl2(-)·) generation at +3.0 V NHE. The current efficiency for COD removal was 12% with the lowest specific energy consumption of 96 kWh kgCOD(-1) at the cell voltage of near 4 V in 50 mM chloride. The current efficiency and energy efficiency for H2 generation were calculated to range from 34 to 84% and 14 to 26%, respectively. The hydrogen comprised 35 to 60% by volume of evolved gases. The efficacy of our electrolysis cell was further demonstrated by a 20 L prototype reactor totally powered by a photovoltaic (PV) panel, which was shown to eliminate COD and total coliform bacteria in less than 4 h of treatment. PMID:24417418

  12. Revised Model of Chloride Diffusion in Concrete Bridge by Considering Complex Action of Load and Chloride Binding Capacity

    OpenAIRE

    Xiang, Yiqiang; Guo, DongMei

    2014-01-01

    Coastal concrete bridges will suffer from deterioration of RC structural performance and resistance attenuation because of the chloride penetration and other environment factors. This article discusses current different chloride diffusion models and puts forward the revised model of chloride diffusion in concrete bridge by considering the complex action of load influence and chloride-binding capacity. Comparison of numerical predicted values and relative experimental tests show the presented ...

  13. Influence of heterogeneous ammonium availability on bacterial community structure and the expression of nitrogen fixation and ammonium transporter genes during in situ bioremediation of uranium-contaminated groundwater

    Energy Technology Data Exchange (ETDEWEB)

    Mouser, P.J.; N' Guessan, A.L.; Elifantz, H.; Holmes, D.E.; Williams, K.H.; Wilkins, M.J.; Long, P.E.; Lovley, D.R.

    2009-04-01

    The impact of ammonium availability on microbial community structure and the physiological status and activity of Geobacter species during in situ bioremediation of uranium-contaminated groundwater was evaluated. Ammonium concentrations varied by as much as two orders of magnitude (<4 to 400 {micro}M) across the study site. Analysis of 16S rRNA gene sequences suggested that ammonium influenced the composition of the microbial community prior to acetate addition with Rhodoferax species predominating over Geobacter species at the site with the highest ammonium, and Dechloromonas species dominating at sites with lowest ammonium. However, once acetate was added, and dissimilatory metal reduction was stimulated, Geobacter species became the predominant organisms at all locations. Rates of U(VI) reduction appeared to be more related to the concentration of acetate that was delivered to each location rather than the amount of ammonium available in the groundwater. In situ mRNA transcript abundance of the nitrogen fixation gene, nifD, and the ammonium importer gene, amtB, in Geobacter species indicated that ammonium was the primary source of nitrogen during in situ uranium reduction, and that the abundance of amtB transcripts was inversely correlated to ammonium levels across all sites examined. These results suggest that nifD and amtB expression by subsurface Geobacter species are closely regulated in response to ammonium availability to ensure an adequate supply of nitrogen while conserving cell resources. Thus, quantifying nifD and amtB expression appears to be a useful approach for monitoring the nitrogen-related physiological status of Geobacter species in subsurface environments during bioremediation. This study also emphasizes the need for more detailed analysis of geochemical/physiological interactions at the field scale, in order to adequately model subsurface microbial processes.

  14. CRYSTALLIZATION KINETICS OF AMMONIUM PERCHLORATE IN AN AGITATED VESSEL

    Directory of Open Access Journals (Sweden)

    Nahidh Kaseer

    2013-05-01

    Full Text Available 31Overall crystal growth kinetics for ammonium perchlorate in laboratory scale batch  agitated vessel crystallizer have been determined from batch experiments performed in an integral mode. The effects of temperature between 30-60ºC, seed size 0.07, 0.120 and 0.275 mm and stirrer speed 160, 340, and 480 rpm, on the kinetics of crystal growth were investigated. Two different methods, viz. polynomial fitting and initial derivative were used to predict the kinetics expression. In general both methods gave comparable results for growth kinetics estimation. The order of growth process is not more than two. The activation energy for crystal growth of ammonium perchlorate was determined and found  to be equal to 5.8 kJ/ mole.            Finally, the influence of the affecting parameters on the crystal growth rate gives general expression that had an obvious dependence of the growth rate on each variables of concern (temperature, seed size, and stirrer speed .The general overall growth rate expression had shown that super saturation is the most significant variable. While the positive dependence of the stirrer speed demonstrates the importance of the diffusional step in the growth rate model. Moreover, the positive dependence of the seed size demonstrate the importance of the surface integration  step in the growth rate model. All the studied variables tend to suggest that the growth rate characteristics  of ammonium perchlorate from aqueous solution commenced in a batch crystallizer are diffusion kinetic controlled process.

  15. Regeneration of clinoptilolite zeolite used for the ammonium removal

    International Nuclear Information System (INIS)

    The use of zeolites has been increased in the last years with different applications and with a great boom in the environmental area, but a little had been make about the regeneration of such zeolites. The presence of nitrogen-ammonia in water may cause serious pollution problems since it results to be toxic for fishes and other aquatic life forms, also it provokes the algae growing. The natural clinoptilolite contains interchangeable ions such as the sodium (Na+), potassium (K+), magnesium (Mg2+) and calcium (Ca2+) in different proportions depending on the mineral origin When the zeolite is upgraded to its sodium form, the cation exchange capacity and the preference by the nitrogen-ammonia are increased, allowing the reversible process of sorption. In this work it was proposed the regeneration to its sodium form about the ammonia clinoptilolite zeolite. The natural mineral was characterized using the methods such as: X-ray diffraction, Infrared spectroscopy, Thermal gravimetric analysis and surface area. The results show that the ammonium sorption was between 95% and 98.7% such an ambient temperature as a flow back. the zeolite was regenerated approximately from 60% in the first cycle up to 97% in the last cycle at flow back temperature and of 59.2% up to 96.9% at ambient temperature, it was not presented any significant effect which could be attributed to the temperature. During the exchange process, the cations present in the natural zeolite were exchanged with the ammonium ions, this process was not completed due to that retained ammonium quantity was major that of the desorpted ions, what shows that in addition of ion exchange, another type of sorption process exists. (Author)

  16. STABILISATION OF SILTY CLAY SOIL USING CHLORIDE

    Directory of Open Access Journals (Sweden)

    TAMADHER T. ABOOD

    2007-04-01

    Full Text Available The object of this paper is to investigate the effect of adding different chloride compounds including (NaCl, MgCl2, CaCl2 on the engineering properties of silty clay soil. Various amounts of salts (2%, 4%, and 8% were added to the soil to study the effect of salts on the compaction characteristics, consistency limits and compressive strength. The main findings of this study were that the increase in the percentage of each of the chloride compounds increased the maximum dry density and decrease the optimum moisture content. The liquid limit, plastic limit and plasticity index decreased with the increase in salt content. The unconfinedcompressive strength increased as the salt content increased.

  17. BARRIER PROPERTIES OF VINYLIDENE CHLORIDE COPOLYMERS

    Institute of Scientific and Technical Information of China (English)

    LI Yuesheng; WENG Zhixue; HUANG Zhiming; PAN Zuren

    1996-01-01

    The permeability coefficients of a series of copolymers of vinylidene chloride (VDC)with methyl acrylate (MA), butyl acrylate (BA) or vinyl chloride (VC) (as comonomer)to oxygen and carbon dioxide have been measured at 1.0 MPa and 30℃, while those to water vapor have been measured at 30℃ and 100% relative humidity. All the copolymers are semicrystalline. VDC/MA copolymers have lower melting temperature compared with VDC/BA copolymers, while that melting temperature of VDC/VC copolymer is higher than that of VDC/acrylate copolymers with the same VDC content. The barrier property of the copolymers is predominantly controlled by crystallite, free volume fraction, and cohesive energy. The permeability coefficients of VDC/MA copolymers to oxygen, carbon dioxide, and water vapor were successfully correlated with the ratio of free volume to cohesive energy.

  18. Chloride migration in concrete with superabsorbent polymers

    DEFF Research Database (Denmark)

    Hasholt, Marianne Tange; Jensen, Ole Mejlhede

    2015-01-01

    Superabsorbent polymers (SAP) can be used as a means for internal curing of concrete. In the present study, the development of transport properties of concrete with SAP is investigated. The chloride migration coefficient according to NT BUILD 492 is used as a measure of this. Twenty concrete...... mixtures are tested 7, 14, and 28 days after casting. The development of degree of hydration is followed for 20 corresponding paste mixtures. Both when SAP is added with extra water to compensate the SAP water absorption in fresh concrete and without extra water, the internal curing water held by SAP may...... contribute to increase the degree of hydration. No matter if SAP is added with or without extra water, it appears that the so-called gel space ratio can be used as a key parameter to link age and mixture proportions (water-to-cement ratio and SAP dosage) to the resulting chloride migration coefficient; the...

  19. The Properties of Ammonium Dinitramine (ADN): Part 2: Melt Casting

    Science.gov (United States)

    Hahma, A.; Edvinsson, H.; Östmark, H.

    2010-04-01

    A melt casting technique for ammonium dinitramine (ADN) and ADN/aluminum was developed. ADN proved relatively easy to cast, when 1% of magnesium oxide was used as a stabilizer and crystallization kernels. Densities of ADN/MgO 99/1 were 92 to 97% of theoretical mean density (TMD) and those of ADN/Al/MgO 64/35/1 were between 95 and 99% of TMD. Sedimentation of Al in the melt was prevented and the particle wetting was ensured by selecting a suitable particle size for Al. No gelling agents or other additives were used. The casting process and factors influencing it are discussed.

  20. CRYSTALLIZATION KINETICS OF AMMONIUM PERCHLORATE IN AN AGITATED VESSEL

    OpenAIRE

    Nahidh Kaseer; Rafi' J. Yaqub; Ahmed Khalid

    2013-01-01

    31Overall crystal growth kinetics for ammonium perchlorate in laboratory scale batch  agitated vessel crystallizer have been determined from batch experiments performed in an integral mode. The effects of temperature between 30-60ºC, seed size 0.07, 0.120 and 0.275 mm and stirrer speed 160, 340, and 480 rpm, on the kinetics of crystal growth were investigated. Two different methods, viz. polynomial fitting and initial derivative were used to predict the kinetics expression. In general both me...

  1. Aluminum-silicates flotation with quaternary ammonium salts

    Institute of Scientific and Technical Information of China (English)

    王毓华; 胡岳华; 陈湘清

    2003-01-01

    The zeta potential measurements show that the flotation separation of diaspore from kaolinite, illite and pyrophyllite could be achieved in the range of pH 46.5 with cationic collectors. A special quaternary ammonium salts(DTAL) shows better selectivity than that the dodecyl amine(DDA) does for the flotation of three silicates. The closed-circuit flotation results show that the reverse flotation de-silicate can be achieved with DTAL as collector, a new inorganic reagent(SFL) as depressant and MIBC as frother to obtain a bauxite concentrate m(Al2O3)/m(SiO2)>10, Al2O3 recovery>86%).

  2. Prediction of Particle Size of Ammonium Perchlorate during Pulverisation

    Directory of Open Access Journals (Sweden)

    Sunil Jain

    2006-07-01

    Full Text Available Ammonium perchlorate has been pulverised by an impact mill (air classifier mill to studythe influence of different operating parameters, viz., effect of mill speed, classifier speed, feedrate, and damper opening (suction rate on the particle size. Further based on the differentgrinding parameters, an empirical equation has been developed and used for the prediction ofparticle size. The experimental results indicate that the values are very close to the predictedones. In addition, particle size distribution has also been studied by applying different modelequations and it has been found that Rosin-Rammler model is the most suitable model for thisoperation.

  3. Further laboratory and theoretical investigations of ammonium dinitramide

    Energy Technology Data Exchange (ETDEWEB)

    Tulis, A.J.; Snelson, A. [IIT Research Institut, Chicago (United States); Heberlein, C.; Patel, D.L. [U.S. Army Cecom RD et E Center, NVESD (United States)

    1996-12-31

    Hydrogen and deuterated ammonium dinitramide have been vaporized under high vacuum and the IR matrix isolation spectra of the decomposition products obtained. Tentative vibration assignments have been made for HN(NO{sub 2}){sub 2} and DN(NO{sub 2}){sub 2} assuming a symmetrical non-planar structure in which the H or D is bonded to the central nitrogen atom. Other structures are also possible. Ab initio calculations have been made for the various structural isomers of hydrogen dinitramide. Vibration frequencies calculated for the hydrogenated and deuterated species are compared with the experimental values with the object of identifying the molecules` structure. (authors) 3 refs.

  4. Surface energy and crystallization phenomena of ammonium dinitramide

    Energy Technology Data Exchange (ETDEWEB)

    Teipel, Ulrich; Heintz, Thomas [Fraunhofer-Institut fuer Chemische Technologie (ICT), PO Box 1240, D-76318 Pfinztal (Germany)

    2005-12-01

    Ammonium dinitramide (ADN) was characterized during recrystallization from the melt. The surface tension of molten ADN at 97 C was measured to be 89 mN/m. The wetting angles between molten ADN and different solid surfaces (polytetrafluoroethylene, glass, steel, and aluminum) were determined. The wettability depends on the surface tension of molten ADN, the free surface energy of the solid surfaces and the interfacial tension between the solid and liquid. Observations of the recrystallization behavior of molten ADN showed that nucleation does not occur, even at super cooling rates of 70 K. Crystallization can be initiated by the application of seed crystals. (Abstract Copyright [2005], Wiley Periodicals, Inc.)

  5. Ammonium diamminesilver(I bis(5-chloro-2-hydroxybenzenesulfonate trihydrate

    Directory of Open Access Journals (Sweden)

    Zhao-Peng Deng

    2012-02-01

    Full Text Available The reaction of silver nitrate with 5-chloro-2-hydroxybenzenesulfonic acid in the presence of ammonia yielded the title salt, (NH4[Ag(NH32](C6H4ClO4S2·3H2O. The AgI ion shows linear coordination [N—Ag—N = 175.2 (1 °]. The ammonium and diamminesilver cations, the benzenesulfonate anion and the lattice water molecules interact through an intricate network of N—H...O and O—H...O hydrogen bonds to form a three-dimensional network.

  6. Influence of chloride admixtures on cement matrix durability

    International Nuclear Information System (INIS)

    The influence of various inorganic salts, as chloride admixtures to Portland cement, on the mechanical properties and the durability of the matrix has been studied. The salts used in this study are chromium, nickel and cadmium chlorides. Improved compressive strength values are obtained which have been correlated to the stable metal hydroxide formation in high pH environment. Under static water conditions at 500C, hydrolyzed chloride ions exhibit adverse effects on the matrix durability through rapid release of calcium as calcium chloride in the initial period of leaching. On the contrary, enhanced matrix durability is obtained on long term leaching in the case of cement containing chromium chloride

  7. Acylation of Toluene with Isobutyryl Chloride

    Czech Academy of Sciences Publication Activity Database

    Čejka, Jiří; Klisáková, Jana; Žilková, Naděžda; Červený, L.

    Cape Town, 2004 - ( Steen van, E.), s. 2717-2723 ISBN 0-958-46636-X. [International Zeolite Conference /14./. Cape Town (ZA), 25.04.2004-30.04.2004] R&D Projects: GA ČR GA203/03/0804 Institutional research plan: CEZ:AV0Z4040901 Keywords : acylation of toluene * isobutyryl chloride * zeolites Subject RIV: CF - Physical ; Theoretical Chemistry

  8. Chloride migration in concrete with superabsorbent polymers

    OpenAIRE

    Hasholt, Marianne Tange; Jensen, Ole Mejlhede

    2015-01-01

    Superabsorbent polymers (SAP) can be used as a means for internal curing of concrete. In the present study, the development of transport properties of concrete with SAP is investigated. The chloride migration coefficient according to NT BUILD 492 is used as a measure of this. Twenty concrete mixtures aretested 7, 14, and 28 days after casting. The development of degree of hydration is followed for 20 corresponding paste mixtures.Both when SAP is added with extra water to compensate the SAP wa...

  9. Gasometric titration for dimethylaluminum chloride analysis.

    Science.gov (United States)

    Wang, Lin; Maligres, Peter; Eckenroad, Kyle; Simmons, Bryon

    2016-06-01

    A gasometric titration method was developed to quantitate active alkylaluminum content in dimethylaluminum chloride solution to perform the stoichiometry calculation for the reaction charge. The procedure was reproducible with good precision, and the results showed good correlation with ICP-MS method. The gasometric titration is a simple, inexpensive alternative to analysis via ICP-MS which provides more selective analysis of methylaluminum species without the need for inertion. PMID:27017569

  10. A Duplex Stainless Steel for Chloride Environments

    Science.gov (United States)

    Sridhar, N.; Kolts, J.; Flasche, L. H.

    1985-03-01

    This paper examines the effects of microstructural changes on the corrosion, stress corrosion cracking and corrosion fatigue resistance of a duplex stainless steel to chloride environments. The microstructural changes can be precipitation of phases such as sigma and carbides, or changes in the distribution of austenite and ferrite. The former can be important in hot forming operations while the latter is important in welding. The methods of minimizing these deleterious effects can sometimes be different from those used for austenitic stainless steel.

  11. Electrodeposition of Zinc from Chloride Solution

    OpenAIRE

    NAIK, Yanjerappa Arthoba; VENKATESHA, Thimmappa Venkatarangaiah

    2002-01-01

    The electroplating of zinc is carried out in the presence of 3,4,5-Trimethoxy benzaldehyde from a chloride bath. The bath constituents are optimized through Hull cell experiments. Operating parameters such as pH, temperature, and current density are also optimized. The current efficiency and throwing power are measured at different current densities. Polarization study is carried out under galvanostatic conditions. Corrosion resistance test indicated good protection of steel by the ...

  12. Electrochemical behaviours of scandium in chloride melts

    International Nuclear Information System (INIS)

    Electrochemical behaviour of scandium(3) ions in an eutectic melt of NaCl-KCl-CsCl at 810-850 K is studied by cyclic voltammetry and chronoamperometry. The process of cathodic reduction of scandium complex ions in chloride melts is found to proceed according to the scheme: Sc(3) → Sc(0) and to be controlled by the rate of ScCl63- complex dissociation

  13. (tert-Butyl(2-hydroxyethylammonium chloride

    Directory of Open Access Journals (Sweden)

    Cintya Valerio-Cárdenas

    2014-07-01

    Full Text Available In the cation of the title molecular salt, C6H16NO+·Cl−, the N—C—C—O torsion angle is 176.5 (2°. In the crystal, the cations and chloride ions are linked by N—H...O and O—H...O hydrogen bonds, generating a two-dimensional network parallel to (100.

  14. Manganese laser using manganese chloride as lasant

    Science.gov (United States)

    Chen, C. J.

    1974-01-01

    A manganese vapor laser utilizing manganese chloride as a lasant has been observed and investigated. Lasing is attained by means of two consecutive electrical discharges. The maximum laser output is obtained at a vapor pressure of about 3 torr, a temperature of 680 C, and a time delay between electrical discharges of 150 microsec. The maximum energy density is 1.3 microjoule per cu cm.

  15. New and rapid access to synthesis of novel polysubstituted imidazoles using antimony trichloride and stannous chloride dihydrate as effective and reusable catalysts

    Indian Academy of Sciences (India)

    Leyla Poorali; Bahador Karami; Khalil Eskandari; Mahboobeh Azizi

    2013-05-01

    In this work, new, efficient and environmentally adapted synthesis of polysubstituted imidazoles in one-pot is repoted. The multicomponent reaction of various aldehydes, benzil, aliphatic and aromatic primary amines and ammonium acetate under solvent-free condition is explained. The highly efficient role of antimony trichloride and stannous chloride dihydrate as catalyst in this synthesis was shown and their effects on the reaction process were studied. By this advantage, several polysubstituted imidazoles as pharmaceutical important molecules can be prepared in high yield and high purity. This method is a very easy and rapid for the synthesis of imidazole derivatives.

  16. Chloride Channel Myotonia: Study of Five Cases

    Directory of Open Access Journals (Sweden)

    M Ghofrani

    2002-09-01

    Full Text Available Chloride channel Myotonia is a form of channelopathy, and Myotonia is its manifestation. Myotonia may be defined as delayed relaxation of skeletal muscle after its contraction. Decreased chloride conductance across the transverse tubular system, renders the muscle membrane hyper-excitable and leads to repetitive firing, creating Myotonia. Myotonia congenital is another name for chloride channel Myotonia. Myotonia congenital appears in autosomal dominant type called Thomson disease, autosomal recessive type called Becker disease, and a type with sporadic occurrence. Symptoms appear in the first or second decade of life. Repeated muscle contraction, the so called warm up, result in resolution of the Myotonia stiffness. Muscle stiffness and hypertrophy is another finding at physical examination. In this study we report on 5 patients, which had clinical and electrical signs of Myotonia. Muscle hypertrophy and warm up phenomena were present in all cases. CPK measurement of all cases were normal. 2 patients underwent muscle biopsy that showed only atrophy and increased central nuclei. In three cases autosomal recessive inheritance (Becker, in one case autosomal dominant inheritance (Thomsen and in one case sporadic occurrence was suggested. With respect to successful results of carbamazepine therapy in 4 patients, and being excellent in one of them, we suggest carbamazepine for the first choice of Myotonia treatment.

  17. An autopsy case of zinc chloride poisoning.

    Science.gov (United States)

    Kondo, Takeshi; Takahashi, Motonori; Watanabe, Seiya; Ebina, Masatomo; Mizu, Daisuke; Ariyoshi, Koichi; Asano, Migiwa; Nagasaki, Yasushi; Ueno, Yasuhiro

    2016-07-01

    Ingestion of large amounts of zinc chloride causes corrosive gastroenteritis with vomiting, abdominal pain, and diarrhea. Some individuals experience shock after ingesting large amounts of zinc chloride, resulting in fatality. Here, we present the results of an administrative autopsy performed on a 70-year-old man who ingested zinc chloride solution and died. After drinking the solution, he developed vomiting, abdominal pain, and diarrhea, and called for an ambulance. Except for tachycardia, his vital signs were stable at presentation. However, he developed hypotension and severe metabolic acidosis and died. The patient's blood zinc concentration on arrival was high at 3030μg/dL. Liver cirrhosis with cloudy yellow ascites was observed, however, there were no clear findings of gastrointestinal perforation. The gastric mucosa was gray-brown, with sclerosis present in all gastric wall layers. Zinc staining was strongly positive in all layers. There was almost no postmortem degeneration of the gastric mucosal epithelium, and hypercontracture of the smooth muscle layer was observed. Measurement of the zinc concentration in the organs revealed the highest concentration in the gastric mucosa, followed by the pancreas and spleen. Clinically, corrosive gastroenteritis was the cause of death. However, although autopsy revealed solidification in the esophagus and gastric mucosa, there were no findings in the small or large intestine. Therefore, metabolic acidosis resulting from organ damage was the direct cause of death. PMID:27497327

  18. Potassium chloride production by microcline chlorination

    International Nuclear Information System (INIS)

    Highlights: • Use of chlorination for the KCl production. • The reagents used were microcline, hydromagnesite and chlorine. • Isothermal and non-isothermal assays were performed in Cl2–N2 mixture. • The chlorination generated KCl at 700 °C. • The chlorination products promote KCl formation. - Abstract: The potassium chloride is one of the most important fertilizers used in agriculture. The current demand of this salt makes interesting the study of potassium chloride production from unconventional potassium resources. In this work the potassium chloride production by chlorination of microcline was investigated. The starting reagents were microcline, hydromagnesite and chlorine. Non-isothermal and isothermal chlorination assays were carried out in a thermogravimetric device adapted to work in corrosive atmospheres. The temperature effect on potassium extraction and the phase transformations produced during chlorination of microcline were studied. The reagents and reaction products were analyzed by X-ray fluorescence (XRF) and X-ray diffraction (XRD). The experimental results indicated that by chlorination of microcline an important extraction of potassium in the temperature range from 800 to 900 °C was produced. Moreover, at 800 °C the forsterite, enstatite and magnesium aluminate spinel phases were generated

  19. Microwave spectrum and structure of nitrosyl chloride

    International Nuclear Information System (INIS)

    The microwave spectra of 15N isotopic species of nitrosyl chloride, 15NO35Cl and 15NO37Cl, have been assigned between 8 and 26 GHz, and the following rotational constants have been obtained: A = 81600 MHz, B = 5693.80 MHz, and C = 5322.44 MHz for 15NO35Cl, A = 81520 MHz, B = 5556.07 MHz, and C = 5201.56 MHz for 15NO37Cl. The microwave spectra of the normal species of nitrosyl chloride as well as the 37Cl species and the 18O species have already been measured by Millen et al. (1961). An analysis of both the rotational constants obtained in this study and the constants by Millen et al. has given the following bond lengths and angle as the complete r sub(s) structural parameters of nitrosyl chloride. r(N-O) = 1.143 +- 0.006 A, r(N-Cl) = 1.973 +- 0.003 A, and 0 +- 0.50. The nuclear quadrupole coupling constants in the N-Cl bond axis system of 15NO35Cl are X sub(zz) = -57.8 MHz and eta = -0.311. (author)

  20. Boldine action against the stannous chloride effect.

    Science.gov (United States)

    Reiniger, I W; Ribeiro da Silva, C; Felzenszwalb, I; de Mattos, J C; de Oliveira, J F; da Silva Dantas, F J; Bezerra, R J; Caldeira-de-Araújo, A; Bernardo-Filho, M

    1999-12-15

    Peumus boldus extract has been used in popular medicine in the treatment of biliar litiase, hepatic insufficiency and liver congestion. Its effects are associated to the substance boldine that is present in its extract. In the present work, we evaluated the influence of boldine both in: (i) the structural conformation of a plasmid pUC 9.1 through gel electrophoresis analysis; and in (ii) the survival of the strain of Escherichia coli AB1157 submitted to reactive oxygen species (ROS), generated by a Fenton like reaction, induced by stannous chloride. Our results show a reduction of the lethal effect induced by stannous chloride on the survival of the E. coli culture in the presence of boldine. The supercoiled form of the plasmid is not modified by stannous chloride in the presence of boldine. We suggest that the protection induced by boldine could be explained by its anti-oxidant mechanism. In this way, the boldine could be reacting with stannous ions, protecting them against the oxidation and, consequently, avoiding the generation of ROS. PMID:10624900

  1. Potassium chloride production by microcline chlorination

    Energy Technology Data Exchange (ETDEWEB)

    Orosco, Pablo, E-mail: porosco@unsl.edu.ar [Instituto de Investigaciones en Tecnología Química (INTEQUI), Chacabuco y Pedernera, San Luis (Argentina); Facultad de Química, Bioquímica y Farmacia, Universidad Nacional de San Luis, Chacabuco y Pedernera, San Luis (Argentina); Ruiz, María del Carmen [Instituto de Investigaciones en Tecnología Química (INTEQUI), Chacabuco y Pedernera, San Luis (Argentina)

    2015-08-10

    Highlights: • Use of chlorination for the KCl production. • The reagents used were microcline, hydromagnesite and chlorine. • Isothermal and non-isothermal assays were performed in Cl{sub 2}–N{sub 2} mixture. • The chlorination generated KCl at 700 °C. • The chlorination products promote KCl formation. - Abstract: The potassium chloride is one of the most important fertilizers used in agriculture. The current demand of this salt makes interesting the study of potassium chloride production from unconventional potassium resources. In this work the potassium chloride production by chlorination of microcline was investigated. The starting reagents were microcline, hydromagnesite and chlorine. Non-isothermal and isothermal chlorination assays were carried out in a thermogravimetric device adapted to work in corrosive atmospheres. The temperature effect on potassium extraction and the phase transformations produced during chlorination of microcline were studied. The reagents and reaction products were analyzed by X-ray fluorescence (XRF) and X-ray diffraction (XRD). The experimental results indicated that by chlorination of microcline an important extraction of potassium in the temperature range from 800 to 900 °C was produced. Moreover, at 800 °C the forsterite, enstatite and magnesium aluminate spinel phases were generated.

  2. Solubility of sodium chloride in superheated steam

    International Nuclear Information System (INIS)

    The solubility of sodium chloride in superheated steam was investigated in laboratory-scale experiments up to 20 MPa and 475 C. These experiments were carried out using a dynamic method where deionized steam was passed through a packed bed of salt crystals in a 500 mL Hastelloy autoclave. The residence time of the steam in the salt bed was sufficient to saturate the steam with the salt. The steam samples were cooled and analyzed by ion chromatography. Correlations based on temperature and density were selected to describe the solubility of sodium chloride in superheated steam. The density dependence is much stronger than the temperature dependence. By using these correlations, it is possible to estimate the solubility of salt in steam at lower densities than those used in the experiments. Enthalpy-entropy diagrams are given that show the steam expansion line in turbines, including curves for constant concentration of sodium chloride solubility in steam. These can be used to analyze where in the steam cycle this salt may deposit. (orig.)

  3. The Accelerated Test of Chloride Permeability of Concrete

    Institute of Scientific and Technical Information of China (English)

    TAN Ke-feng; ODD E Gjφrv

    2003-01-01

    The availability of accelerated chloride permeability test and the effect of w/c ratio, incorporation of silica fume, maximum aggregate size and aggregate type on the chloride permeability were studied. The mathematic analysis certifies that there is a linear relationship between accelerated test and natural diffusion. Test results show that the chloride permeability of concrete increases as w/c ratio increases whilst a limited amount of replacement of cement with silica fume, the chloride permeability decreases dramatically. The maximum aggregate size in the range of 8 to 25 mm seems also affect chloride permeability but with a much less significant level. The chloride permeability of silica fume lightweight aggregate concrete is very low, especially the concrete made with dry lightweight concrete. The chloride permeability can be evaluated by this accelerated test method.

  4. Molecular recognition of organic ammonium ions in solution using synthetic receptors

    Directory of Open Access Journals (Sweden)

    Andreas Späth

    2010-04-01

    Full Text Available Ammonium ions are ubiquitous in chemistry and molecular biology. Considerable efforts have been undertaken to develop synthetic receptors for their selective molecular recognition. The type of host compounds for organic ammonium ion binding span a wide range from crown ethers to calixarenes to metal complexes. Typical intermolecular interactions are hydrogen bonds, electrostatic and cation–π interactions, hydrophobic interactions or reversible covalent bond formation. In this review we discuss the different classes of synthetic receptors for organic ammonium ion recognition and illustrate the scope and limitations of each class with selected examples from the recent literature. The molecular recognition of ammonium ions in amino acids is included and the enantioselective binding of chiral ammonium ions by synthetic receptors is also covered. In our conclusion we compare the strengths and weaknesses of the different types of ammonium ion receptors which may help to select the best approach for specific applications.

  5. Relation between chloride exchange diffusion and a conductive chloride pathway across the isolated skin of the toad (Bufo bufo)

    DEFF Research Database (Denmark)

    Kristensen, P; Larsen, Erik Hviid

    1978-01-01

    Substitution of chloride in the outside bathing medium of the toad skin with bromide, iodide, nitrate and sulphate leads to a reduction in the apparent exchange diffusion of chloride across this tissue, and also to a reduction of the chloride current recorded during hyperpolarization. A series of...... systems could be explained as secondary effects due to a primary interaction with the sodium transport mechanisms. A correlation was found between the clamping current recorded during hyperpolarization and the efflux of chloride under short circuit conditions with chloride Ringer's on both sides. On the...

  6. Shock Initiation and Equation of State of Ammonium Nitrate

    Science.gov (United States)

    Robbins, David; Sheffield, Steve; Dattelbaum, Dana; Chellappa, Raja; Velisavljevic, Nenad

    2013-06-01

    Ammonium nitrate (AN) is a widely used fertilizer and mining explosive commonly found in ammonium nitrate-fuel oil. Neat AN is a non-ideal explosive with measured detonation velocities approaching 4 km/s. Previously, we reported a thermodynamically-complete equation of state for AN based on its maximum density, and showed that near-full density AN did not initiate when subjected to shock input conditions up to 22 GPa. In this work, we extend these initial results, by presenting new Hugoniot data for intermediate density neat AN obtained from gas gun-driven plate impact experiments. AN at densities from 1.8 to 1.5 g/cm3 were impacted into LiF windows using a two-stage light gas gun. Dual VISARs were used to measure the interfacial particle velocity wave profile as a function of time following impact. The new Hugoniot data, in addition to updates to thermodynamic parameters derived from structural analysis and vibrational spectroscopy measurements in high pressure diamond anvil cell experiments, are used to refine the unreacted EOS for AN. Furthermore, shock initiation of neat AN was observed as the initial porosity increased (density decreased). Insights into the relationship(s) between initial density and shock initiation sensitivity are also presented, from evidence of shock initiation in the particle velocity profiles obtained for the lower density AN samples.

  7. Ammonium nitrate as an oxidizer in solid composite propellants

    Science.gov (United States)

    Manelis, G. B.; Lempert, D. B.

    2009-09-01

    Despite the fact that ammonium nitrate (AN) has the highest hydrogen content and fairly high oxygen balance (compared to other oxidizers), its extremely low formation enthalpy and relatively low density makes it one of the worst power oxidizers in solid composite propellants (SCP). Nevertheless, AN has certain advantages - the combustion of the compositions containing AN is virtually safe, its combustion products are ecologically clean, it is very accessible and cheap, and also very thermostable (far more stable than ammonium dinitramide (ADN)). Besides, its low density stops being a disadvantage if the propellant has to be used in deep space and therefore, must be carried there with other rocket carriers. The low cost of AN may also become a serious advantage in the AN application even in lower stages of multistage space launchers as well as in one-stage space launchers with low mass fraction of the propellant. The main specific features relevant to the creation of AN-based SCPs with the optimal energetic characteristics are discussed. The use of metals and their hydrides and proper fuel-binders as well as the recent successes in phase stabilization of AN are described.

  8. Steroidal Ammonium Compounds as New Neuromuscular Blocking Agents.

    Science.gov (United States)

    Rao, Zhigang; Hu, Hao; Tang, Jiazhi; Liu, Zhiying; Yang, Yue; Qiu, Guofu; Xiao, Yuling; Liu, Peng; Hu, Xianming; Zhou, Xiaoju; Hong, Xuechuan

    2016-05-01

    Neuromuscular blocking agents are widely used as an anesthesia auxiliary in surgery, which induce relaxation of skeletal muscles by blocking signal transmission at the neuromuscular junction. Many neuromuscular blocking agents s were developed over the past decades, but none of them fully meets the needs of the clinic by various reasons. In this study, a series of quaternary ammonium steroidal neuromuscular blocking agents were synthesized and evaluated on isolated mouse phrenic nerve-hemidiaphragms for their bioactivities. The initial separation of mono- and bis-quaternary ammonium compounds turned out to be very challenging on regular silica gel chromatography. Therefore, a facile purification method, in which the silica gel was pretreated with methanolic sodium bromide solution, was finally achieved. Compounds 3g (0.36 μm) and 4g (0.37 μm) exhibited excellent neuromuscular blocking activities, which were about sixfold to sevenfold higher in potency than that of rocuronium (2.50 μm). In addition, other bis-quaternized compounds also showed good potencies close to that of rocuronium. Furthermore, the preliminary structure-activity relationship of this series was also elucidated. Benzyl group was found to be a promising quaternary group in this series. PMID:26684806

  9. Development of electrochemical denitrification from waste water containing ammonium nitrate

    International Nuclear Information System (INIS)

    The authors developed processes to dentrify waste water containing ammonium nitrate discharged from the nuclear fuel manufacturing works and to recover nitric acid and ammonia. For denitrification they applied the operating method and the conditions of operation to make 0.4mM or less from NH4NO3 waste water of 1.5 M by 3 stages of electrodialysis cells. To recover nitric acid and ammonium water, they separated HNO3 solution of 6 M and NH4OH solution with one unit of electrolysis cell, then absorbed NH3 gas from NH4OH solution with water and applied the condition of operation to recover 8 M NH4OH solution. The authors demonstrated that treatment and recovery can be carried out stably with actual waste water with a system through the combination of previously mentioned electrodialysis cells, electrolysis cells and an ammonia gas absorber. At present they are planning a plant where NH4NO3 waste water of 4,500 mol can be treated per day

  10. Effects of Calcium Lignosulfonate and Silicic Acid on Ammonium Nitrate Degradation

    Directory of Open Access Journals (Sweden)

    Ahmet Ozan Gezerman

    2014-01-01

    Full Text Available Ammonium nitrate salts are the most commonly used nitrogenous fertilizers in industry. However, storage of ammonium nitrate is problematic, since its initial properties can decline because of environmental factors, leading to large economic losses. In this study, in order to prevent the caking and degradation of ammonium nitrate, an alternative composition with additional calcium lignosulfonate and silicic acid was studied. The resulting fertilizer was analyzed by screening analysis, ion chromatography, and electron microscopy methods.

  11. Ammonium removal from municipal wastewater with application of ion exchange and partial nitritation/Anammox process

    OpenAIRE

    Malovanyy, Andriy

    2014-01-01

    Nitrogen removal from municipal wastewater with application of Anammox process offers cost reduction, especially if it is combined with maximal use of organic content of wastewater for biogas production. In this study a new technology is proposed, which is based on ammonium concentration from municipal wastewater by ion exchange followed by biological removal of ammonium from the concentrated stream by partial nitritation/Anammox process. In experiments on ammonium concentration four the most...

  12. Influence of different ammonium, lactate and glutamine concentrations on CCO cell growth

    OpenAIRE

    Slivac, Igor; Blajić, Višnja; Radošević, Kristina; Kniewald, Zlatko; Gaurina Srček, Višnja

    2010-01-01

    In this study the effects of ammonium and lactate on a culture of channel catfish ovary (CCO) cells were examined. We also made investigation on the influence of glutamine, since our previous research revealed that this amino acid stimulated CCO cell growth more than glucose in a concentration-dependent manner. The effect of ammonium in cell culture included the considerable decrease in cell growth rate with eventual growth arrest as well as the retardation of glucose consumption. At ammonium...

  13. Purification of uranium from fission products by ammonium uranyl carbonate precipitation

    International Nuclear Information System (INIS)

    Processing of the oxalate filtrate generated in plutonium reconversion laboratory involves recovery of plutonium by uranous oxalate carrier precipitation and uranium by ammonium diuranate precipitation. The ammonium di-uranate precipitate generally carries most of the fission products which are high energy gamma emitters. Purification of uranium from the fission products has been investigated employing ammonium carbonate which dissolves the slurry and re-precipitates uranium as ammonium uranyl carbonate. Fission product decontamination factor has been evaluated, which indicate the possibility of 99.6% recovery and purification of uranium from fission products. This method simplifies the purification process with less man-rem exposure and high quality end product. (author)

  14. Interaction between Ammonium Toxicity and Green Tide Development Over Seagrass Meadows: A Laboratory Study

    DEFF Research Database (Denmark)

    Marin, Francisco Moreno; Vergara, Juan J.; Pérez-Llorens, J. Lucas; Pedersen, Morten Foldager; Brun, Fernando G.

    Eutrophication affects seagrasses negatively by increasing light attenuation through stimulation of biomass of fast-growing, bloom-forming algae and because high concentrations of ammonium in the water can be toxic to higher plants. We hypothesized nevertheless, that moderate amounts of nitrophilic...... by high ammonium availability although Ulva sp. lowered the availability of light. Benthic microalgae, which increased in biomass during the experiment, seemed to play a similar role as Ulva sp.–they contributed to remove ammonium from the water, and thus, aided to keep the ammonium concentrations...

  15. Anaerobic ammonium oxidation by anammox bacteria in the Black Sea RID B-8834-2011

    DEFF Research Database (Denmark)

    Kuypers, MMM; Sliekers, AO; Lavik, G.; Schmid, M.; Jørgensen, BB; Kuenen, JG; Damste, JSS; Strous, M.; Jetten, MSM

    2003-01-01

    ). Here we provide evidence for bacteria that anaerobically oxidize ammonium with nitrite to N(2) in the world's largest anoxic basin, the Black Sea. Phylogenetic analysis of 16S ribosomal RNA gene sequences shows that these bacteria are related to members of the order Planctomycetales performing the...... anammox (anaerobic ammonium oxidation) process in ammonium-removing bioreactors(3). Nutrient profiles, fluorescently labelled RNA probes, (15)N tracer experiments and the distribution of specific 'ladderane' membrane lipids(4) indicate that ammonium diffusing upwards from the anoxic deep water is consumed...

  16. Studies on Biquaternary Ammonium Salt Algaecide for Removing Red Tide Algae

    Institute of Scientific and Technical Information of China (English)

    刘洁生; 张珩; 杨维东; 高洁; 柯琼

    2004-01-01

    The paper deals with the removal and control of red tide algae, Phaeoecystis globosa and Alexandrium tamarense by biquaternary ammonium salt algaecide. The results show that the efficient concentration of biquaternary ammonium salt to control the two algaes in 96 h is 0.8 mg · L-1 and 0.4 mg · L-1, respectively. It is found that biquaternary ammonium salt has high efficiency and longer duration of action in the removal and control of algae.Biquaternary ammonium salt might be an excellent algaecide to control HAB.

  17. Reduced blood flow increases the in vivo ammonium ion concentration in the RIF-1 tumor

    International Nuclear Information System (INIS)

    Purpose: Previous studies from our laboratory have suggested that pooling of ammonium in tumor tissues may be caused by its inefficient removal due to the poor vasculature commonly found in tumors. The purpose of these experiments was to validate the relationship between tumor ammonium ion concentration and tumor blood flow, and to determine whether large concentrations of ammonium ion detected by Nuclear Magnetic Resonance (NMR) spectroscopy are either produced within the tumor or simply imported into the tumor through the blood stream. Methods and Materials: To test this hypothesis, we reduced blood flow in subcutaneously grown Radiation Induced Fibrosarcoma-1 (RIF-1) tumors, either by creating partial ischemia with a bolus injection of hydralazine or by occlusion with surgical sutures. 14N and 31P NMR spectroscopy were used to detect the presence of ammonium, and to assess the bioenergetic status of the tumors, respectively. Results: A correlation between ammonium ion concentration and (PCr(Pi)) ratio was established for untreated tumors. An increase in the in vivo tumor ammonium ion concentration was observed for every tumor that experienced a reduction in blood flow caused by either hydralazine injection or suture ligation. Changes in ammonium ion concentration paralleled changes in the bioenergetics of hydralazine-treated tumors. Conclusion: Our results support the hypothesis that a reduction in tumor blood flow is responsible for the accumulation of ammonium in tumors, and that detected ammonium originated from within the tumor

  18. Synthesis, characterization, and self-assembly with plasmid DNA of a quaternary ammonium derivative of pectic galactan and its fluorescent labeling for bioimaging applications.

    Science.gov (United States)

    Chintakunta, Ramesh; Buaron, Nitsa; Kahn, Nicole; Moriah, Amana; Lifshiz, Rinat; Goldbart, Riki; Traitel, Tamar; Tyler, Betty; Brem, Henry; Kost, Joseph

    2016-10-01

    Quaternized derivatives of pectic galactan (QPG) were synthesized by a reaction of pectic galactan (PG) with 3-chloro-2-hydroxypropyl trimethyl ammonium chloride (CHPTAC) in the presence of aqueous sodium hydroxide solution under mild reaction conditions. The results showed that the concentration of CHPTAC and NaOH has great impact on the quaternization reaction. QPG was found to interact electrostatically with plasmid DNA in aqueous solution to form complexes in globular condensed morphology in a nanometer scale size ranging from 60 to 160nm. Complexes formed with QPG fluorescently labeled with 5-DTAF (QPG-5-DTAF) were introduced to the C6 rat glioma cell line, and were found to be able to enter the cell and approach the nucleus within 24h. The results suggest that this type of modified natural polysaccharide may have an advantage as a biocompatible and biodegradable gene delivery carrier and furthermore may serve as a cell specific carrier. PMID:27312642

  19. Ammonium sulphate on maize crops under no tillage

    Directory of Open Access Journals (Sweden)

    Maria Anita Gonçalves da Silva

    2012-01-01

    Full Text Available The objectives of this work were to evaluate the management of N and S (as ammonium sulphate fertilization under no-tillage system on the components of maize productivity and on N and S accumulation in the crop, as well as to evaluate the minimum value of the Nitrogen Sufficiency Index (NSI 0.95 as an indicator for side dressing requirements. The experiment had a completely randomized block design with six treatments and four replications carried out in Red Latosol dystrophic soil (Hapludox, in Campo Mourão, Paraná State, where the following treatments in summer growth maize were applied: T1- 120 kg ha-1 N in seeding; T2- 120 kg ha-1 N in side dressing; T3- 40 kg ha-1 N in seeding and 80 kg ha-1 N in side dressing; T4- 30 kg ha-1 N in seeding and 90 kg ha-1 N in side dressing, monitored by a chlorophyll meter using the Nitrogen Sufficiency Index (NSI; T5- 120 kg ha-1 N anticipated in wheat seeding; T6- without nitrogen fertilization. NSI was determined by the relationship between the leaf chlorophyll index (ICF average of T4 plants and that one in the plot fertilized with 120 kg ha-1 N at the maize seed sowing (T1. During two years, ammonium sulphate was applied to the maize crop after wheat under no tillage system. In the first year, with adequate rainfall, the maize yield was similar to the one in which the complete ammonium sulphate dose application was done in maize seeding and side dressing. The anticipated fertilization to wheat seed sowing resulted in maize yield without difference from the parceled form. In the second year, with irregular rainfall, all treatments with N were similar and they increased maize yield compared to that without N fertilization. NSI of 0.95 was not efficient to evaluate maize N requirements in side dressing, and resulted in lower maize yield. N was accumulated mainly in the grains unlike S that accumulated in the plant shoots; both were highly correlated to maize productivity.

  20. Assessment of the potential for ammonium nitrate formation and reaction in Tank 241-SY-101

    International Nuclear Information System (INIS)

    Two principal scenarios by which ammonium nitrate may be formed were considered: (a) precipitation of ammonium nitrate in the waste, and (b) ammonium nitrate formation via the gas phase reaction of ammonia and nitrogen dioxide. The first of these can be dismissed because ammonium ions, which are necessary for ammonium nitrate precipitation, can exist only in negligibly small concentrations in strongly alkaline solutions. Gas phase reactions between ammonia, nitrogen dioxide, and water vapor in the gas phase represent the most likely means by which ammonium nitrate aerosols could be formed in Tank 241-SY-101. Predicted ammonium nitrate formation rates are largely controlled by the concentration of nitrogen dioxide. This gas has not been detected among those gases vented from the wastes using Fourier Transform Infrared Spectrometry (FTIR) or mass spectrometry. While detection limits for nitrogen dioxide have not been established experimentally, the maximum concentration of nitrogen dioxide in the gas phase in Tank 241-SY-101 was estimated at 0.1 ppm based on calculations using the HITRAN data base and on FTIR spectra of gases vented from the wastes. At 50 C and with 100 ppm ammonia also present, less than one gram of ammonium nitrate per year is estimated to be formed in the tank. To date, ammonium nitrate has not been detected on HEPA filters in the ventilation system, so any quantity that has been formed in the tank must be quite small, in good agreement with rate calculations. The potential for runaway exothermic reactions involving ammonium nitrate in Tank 241-SY-101 is minimal. Dilution by non-reacting waste components, particularly water, would prevent hazardous exothermic reactions from occurring within the waste slurry, even if ammonium nitrate were present. 41 refs

  1. Single stage biological nitrogen removal by nitritation and anaerobic ammonium oxidation in biofilm systems.

    Science.gov (United States)

    Helmer, C; Tromm, C; Hippen, A; Rosenwinkel, K H; Seyfried, C F; Kunst, S

    2001-01-01

    In full scale wastewater treatment plants with at times considerable deficits in the nitrogen balances, it could hitherto not be sufficiently explained which reactions are the cause of the nitrogen losses and which micro-organisms participate in the process. The single stage conversion of ammonium into gaseous end-products--which is henceforth referred to as deammonification--occurs particularly frequently in biofilm systems. In the meantime, one has succeeded to establish the deammonification processes in a continuous flow moving-bed pilot plant. In batch tests with the biofilm covered carriers, it was possible for the first time to examine the nitrogen conversion at the intact biofilm. Depending on the dissolved oxygen (DO) concentration, two autotrophic nitrogen converting reactions in the biofilm could be proven: one nitritation process under aerobic conditions and one anaerobic ammonium oxidation. With the anaerobic ammonium oxidation, ammonium as electron donor was converted with nitrite as electron acceptor. The end-product of this reaction was N2. Ammonium and nitrite did react in a stoichiometrical ratio of 1:1.37, a ratio which has in the very same dimension been described for the ANAMMOX-process (1:1.31 +/- 0.06). Via the oxygen concentration in the surrounding medium, it was possible to control the ratio of nitritation and anaerobic ammonium oxidation in the nitrogen conversion of the biofilm. Both processes were evenly balanced at a DO concentration of 0.7 mg/l, so that it was possible to achieve a direct, almost complete elimination of ammonium without addition of nitrite. One part of the provided ammonium did participate in the nitritation, the other in the anaerobic ammonium oxidation. Through the aerobic ammonium oxidation into nitrite within the outer oxygen supplied layers of the biofilm, the reaction partner was produced for the anaerobic ammonium oxidation within the inner layers of the biofilm. PMID:11379106

  2. Molecular mechanisms of carcinogenesis by vinyl chloride.

    Science.gov (United States)

    Dogliotti, Eugenia

    2006-01-01

    In 1974 vinyl chloride (VC), a gas used in the plastics industry, was shown to be a human carcinogen, inducing a very rare type of tumor, angiosarcoma of the liver. The same type of tumor was induced in rodents exposed to VC thus providing an excellent model for mechanistic studies. Here, we review the numerous studies on the mechanism of action of VC with particular emphasis on the DNA products induced by this strong alkylating agent. In particular, the genotoxicity, repair mechanisms, in vivo formation and tumor mutation spectra by etheno-adducts will be analysed and possible approaches for future research suggested. PMID:17033136

  3. Solidification of supercooled molten zinc chloride

    Czech Academy of Sciences Publication Activity Database

    Rodová, Miroslava; Cihlář, Antonín; Nitsch, Karel

    Bratislava: x, 2005 - (Koman, M.; Mikloš, D.), s. 5-9 ISBN 80-89088-42-2. [Development of Materials Science in Research and Education - DMS -RE 2005 /15./. Kežmarské Žĺaby (SK), 05.09.2005-09.09.2005] R&D Projects: GA ČR(CZ) GA202/03/0428 Institutional research plan: CEZ:AV0Z10100521 Keywords : molten zinc chloride * thermal analysis * crystallization * glass formation Subject RIV: BM - Solid Matter Physics ; Magnetism

  4. Benzalkonium Chloride Intoxication Mimicking Herpes Zoster Encephalitis

    Directory of Open Access Journals (Sweden)

    Ekrem Güler

    2011-06-01

    Full Text Available Benzalkonium chloride (BAC is a frequently used disinfectant and its most well-known side effect is contact dermatitis. In this report, two children who had vesicular dermatitis, headache, lethargy, fever and encephalopathy mimicking Herpes zoster encephalitis were presented. Their consciousness level improved on the second day. From the medical history it was understood that the mother had applied 20% BAC solution to the scalps of two children. The aim of the presentation of this report is to draw attention to the fact that BAC application to the scalp for treating pediculosis capitis may resemble the herpes encephalitis clinical picture.

  5. Spectroscopic studies on the competitive interaction between polystyrene sodium sulfonate with polycations and the N-tetradecyl trimethyl ammonium bromide surfactant.

    Science.gov (United States)

    Estrela-Lopis, I; Iturri Ramos, J J; Donath, E; Moya, S E

    2010-01-14

    The interaction of N-tetradecyl trimethyl ammonium bromide (TTAB) surfactants with poly(sodium styrene sulfonate) (PSS), PSS/poly(allylamine hydrochloride) (PAH), and PSS/poly(diallyl dimethyl ammonium chloride) (PDADMAC) complexes has been studied by means of Raman and IR spectroscopy. The stoichiometry of the polyelectrolyte complexes and of the complexes with TTAB has been established. TTAB molecules bind to single PSS molecules in a coiled liquid-like alkyl configuration up to a molar fraction of 67% in dry state. At higher concentrations, TTAB shows a transition to a crystalline phase. In the case of PSS being complexed with PAH, surfactant binds to PSS with a stoichiometry of 2 molecules of TTAB per sulfonic acid group. Spectroscopic data show that TTAB interacting with PSS/PDADMAC complexes is capable of disassembling this polyelectrolyte complex, but when TTAB interacts with the PSS/PAH complexes this polyelectrolyte pair remains stable. Spectroscopic measurements performed at different humidity showed that dry PSS/PAH complexes display the nu(SO(2)) and nu(s)(SO(3)(-)) bands at positions, which are indicative of the presence of hydrogen bonds between PSS and PAH. Red shifts of these bands when mixing the PSS/PAH complexes with TTAB point to structural rearrangements of the complex when interacting with the surfactant. PMID:19938865

  6. Growth and characterization of ammonium acid phthalate single crystals

    Science.gov (United States)

    Arunkumar, A.; Ramasamy, P.

    2013-04-01

    Ammonium acid phthalate (AAP) has been synthesized and single crystals were grown by slow evaporation solution growth technique. The unit cell parameters were confirmed by single crystal X-ray diffraction analysis and it belongs to orthorhombic system with the space group of Pcab. The high resolution X-ray diffraction studies revealed the crystalline perfection of the grown crystal. The various functional groups of AAP were identified by FT-IR and Raman spectral analyses. Thermal stability of the grown crystals was studied by TGA/DTA. The optical properties of the grown crystals were analyzed by UV-Vis-NIR and photoluminescence spectral studies. The mechanical property of the grown crystal was studied by Vickers microhardness measurement. The growth features of AAP were analyzed by chemical etching.

  7. Studies on a Cationically Modified Quaternary Ammonium Salt of Lignin

    Institute of Scientific and Technical Information of China (English)

    YANG Ai-li; JIANG Wen-ju

    2007-01-01

    A new quaternary ammonium salt monomer was synthesized and a quaternary amination of lignin( noted as QL),with the monomer was carried out by grafting copolymerization. The products were characterized by Fourier Transform Infrared spectroscopy(FTIR). The experimental results indicate that the yield of the monomer was 99.06%, and the conversion of the monomer and the grafting yield of QL were 93.69% and 185.78%, respectively. The feasibility of QL as the fiocculant to be applied in color removal of five artificial dyes, eriochrome black T( dye A), gongo red( dye B), direct fast black G (dye C), cuprofix blue green B (dye D), and acid black ATT (dye E) was examined.Results show that QL exhibits the favorable flocculation performance and high stability.

  8. Computational Modeling of Degradation of Substituted Benzyltrimethyl Ammonium: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Long, H.; Pivovar, B. S.

    2014-09-01

    The degradation of cations on the alkaline exchange membranes is the major challenge for alkaline membrane fuel cells. In this paper, we investigated the degradation barriers by density functional theory for substituted benzyltrimethyl ammonium (BTMA+) cations, which is one of the most commonly used cations for alkaline exchange membranes. We found that substituted cations with electron-releasing substituent groups at meta-position of the benzyl ring could result in improved degradation barriers. However, after investigating more than thirty substituted BTMA+ cations with ten different substituent groups, the largest improvement of degradation barriers is only 1.6 kcal/mol. This implies that the lifetime of alkaline membrane fuel cells could increase from a few months to a few years by using substituted BTMA+ cations, an encouraging but still limited improvement for real-world applications.

  9. Review of Options for Ammonia/Ammonium Management

    Energy Technology Data Exchange (ETDEWEB)

    Nash, C. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-05-06

    This report is a review of literature supporting practical ammonia/ammonium destruction processes. Melter research supporting Hanford Low Activity Waste (LAW) glass production has shown that significant amounts of ammonia will be in the melter offgas condensate. Further work with secondary waste forms indicates the potential need to remove the ammonia, perhaps by an oxidative process. This review finds likely practical chemical methods to oxidize ammonia in aqueous solution at moderate temperatures and atmospheric pressure, using easily obtained reagents. Leading candidates include nitrite oxidation to produce nitrogen gas, various peroxide oxidative processes, and air stripping. This work reviews many other processes and provides reasoning to not consider those processes further for this application.

  10. Antibacterial effect of composite resins containing quaternary ammonium polyethyleneimine nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Yudovin-Farber, Ira [Hebrew University of Jerusalem, Department of Medicinal Chemistry and Natural Products, School of Pharmacy, Faculty of Medicine (Israel); Beyth, Nurit; Weiss, Ervin I. [Hebrew University of Jerusalem, Department of Prosthodontics, Faculty of Dentistry (Israel); Domb, Abraham J., E-mail: avid@ekmd.huji.ac.i [Hebrew University of Jerusalem, Department of Medicinal Chemistry and Natural Products, School of Pharmacy, Faculty of Medicine (Israel)

    2010-02-15

    Quaternary ammonium polyethyleneimine (QA-PEI)-based nanoparticles were synthesized by crosslinking with dibromopentane followed by N-alkylation with various alkyl halides and further N-methylation with methyl iodide. Insoluble pyridinium-type particles were prepared by suspension polymerization of 4-vinyl pyridine followed by N-alkylation with alkyl halides. Polyamine-based nanoparticles embedded in restorative composite resin at 1% w/w were tested for antibacterial activity against Streptococcus mutans using direct contact test. Activity analysis revealed that the alkyl chain length of the QA-PEI nanoparticles plays a significant role in antibacterial activity of the reagent. The most potent compound was octyl-alkylated QA-PEI embedded in restorative composite resin at 1% w/w that totally inhibited S. mutans growth in 3-month-aged samples. This data indicates that restorative composite resin with antibacterial properties can be produced by the incorporation of QA-PEI nanoparticles.

  11. Adsorption of anionic dyes on ammonium-functionalized MCM-41

    International Nuclear Information System (INIS)

    Investigations were conducted in a batch reactor system to study the adsorption behavior of four anionic dyes (Methyl orange (MO), Orange IV (OIV), Reactive brilliant red X-3B (X-3B), and Acid fuchsine (AF)) on ammonium-functionalized MCM-41 (NH3+-MCM-41) from aqueous medium by varying the parameters such as contact time, initial dye concentration, pH and competitive anions. Dye adsorption was broadly independent of initial dye concentration. The intraparticle diffusion model was the best in describing the adsorption kinetics for the four anionic dyes on NH3+-MCM-41. The adsorption data for the four dyes were well fitted with the Langmuir model. The electrostatic interaction was considered to be the main mechanism for the dye adsorption. Finally, it was observed that the anion of soft acid inhibited the adsorption capacity significantly

  12. Spectrophotometric determination of boron in ammonium diuranate and interference studies

    International Nuclear Information System (INIS)

    This paper describes determination of boron in ammonium diuranate by spectrophotometry employing curcumin as a complexing agent after extraction of boron with 2-ethyl hexane 1,3 diol. Two diluents namely ethyl alcohol (EtOH) and N,N-dimethyl formamide (DMF) were investigated for the preparation of final solution. It was observed that the blank is less with DMF presumably due to higher extent of deprotonation of uncomplexed curcumin. The detection limits of method for 25 and 10 ml dilution are 20 ng and 10 ng respectively. Interference studies for several cation and anion species like Al, Cr, Mg, Ca, Fe, Mn, Mo, F, W, NO, and different amount of 10% EHD in CHCl3 are also discussed. (author)

  13. A facile synthesis of ω-aminoalkyl ammonium hydrogen phosphates

    Institute of Scientific and Technical Information of China (English)

    Wei Bo Kong; Xiao Yong Zhou; Yang Yang; Xing Yi Xie

    2012-01-01

    A series of ω-aminoalkyl ammonium hydrogen phosphates were synthesized through a simple and efficient three-step method.The starting materials,ω-aminoalkyl alcohols (AC-n,with carbon number n =3,4,5,6),were amino-protected with 9-fluorenylmethyl chloroformate (Fmoc-Cl),followed by phosphorylation with POCl3 and deprotection in piperidine/DMF The structures of each intermediate and final product were confirmed by 1H NMR,FTIR and mass spectrum.The yield of each step was about 77-92%,with a total yield higher than 56%.This new method was superior in low-cost raw materials,mild reaction temperatures (0-25 ℃) and easy purification methods.

  14. Crystal structure of tris-(hydroxyl-ammonium) orthophosphate.

    Science.gov (United States)

    Leinemann, Malte; Jess, Inke; Boeckmann, Jan; Näther, Christian

    2015-11-01

    The crystal structure of the title salt, ([H3NOH](+))3·[PO4](3-), consists of discrete hydroxyl-ammonium cations and ortho-phos-phate anions. The atoms of the cation occupy general positions, whereas the anion is located on a threefold rotation axis that runs through the phospho-rus atom and one of the phosphate O atoms. In the crystal structure, cations and anions are linked by inter-molecular O-H⋯O and N-H⋯O hydrogen bonds into a three-dimensional network. Altogether, one very strong O-H⋯O, two N-H⋯O hydrogen bonds of medium strength and two weaker bifurcated N-H⋯O inter-actions are observed. PMID:26594525

  15. Ammonium derivatives of chromenones and quinolinones as lead antimicrobial agents

    Indian Academy of Sciences (India)

    Shilpi Gupta; Seema Singh; Abha Kathuria; Manish Kumar; Sweta Sharma; Ram Kumar; Virinder S Parmar; Bharat Singh; Anjali Gupta; Erik Van Der Eycken; Gainda L Sharma; Sunil K Sharma

    2012-03-01

    A series of novel ammonium derivatives were synthesized and examined for their antimicrobial efficacy. Comparison of antimicrobial spectrum revealed that compounds 9, 11, 16 and 23 had strong potential against pathogens in vitro. Cytotoxicity results showed compound 9 to be least toxic, it is non-toxic to A549 and U87 cells in MTT assay and exhibits marginal toxicity (15-20%) to human erythrocytes at a concentration of 1000 g/ml as compared to 100% lysis of cells by 31.25 g/ml of the standard drug amphotericin B. This compound has MIC values in the range of 1.95-31.25 g/disc in DDA against different pathogens and may considered to be an important lead antimicrobial molecule for further exploration.

  16. Chloride regulates afferent arteriolar contraction in response to depolarization

    DEFF Research Database (Denmark)

    Hansen, P B; Jensen, B L; Skott, O

    1998-01-01

    afferent arterioles. In 70% of vessels examined, K+-induced contraction was abolished by acute substitution of bath chloride. Consecutive addition of Cl- (30, 60, 80, 100, 110, and 117 mmol/L) restored the sensitivity to K+, and half-maximal response was observed at 82 mmol/L chloride. The calcium channel...... results show that K+-induced contraction of smooth muscle cells in the afferent arteriole is highly sensitive to chloride, whereas neurotransmitter release and ensuing contraction is not dependent on chloride. Thus, there are different activation pathways for depolarizing vasoconstrictors and for the......-Renal vascular reactivity is influenced by the level of dietary salt intake. Recent in vitro data suggest that afferent arteriolar contractility is modulated by extracellular chloride. In the present study, we assessed the influence of chloride on K+-induced contraction in isolated perfused rabbit...

  17. Chloride Ingress in Concrete Cracks under Cyclic Loading

    DEFF Research Database (Denmark)

    Küter, André; Geiker, Mette Rica; Olesen, John Forbes;

    2005-01-01

    increasing focus on the need for modeling the ingress of chloride into cracked concrete. Present models quantify chloride ingress in static cracks only, although several structural applications display dynamic loading conditions in an environment containing chlorides, e.g. marine structures and car parks....... Preliminary investigations have been undertaken to quantify the effect of dynamic load application on the chloride ingress into concrete cracks. Specimens were designed allowing ingress of a chloride solution into a single crack of a saturated unreinforced mortar beam. One set of specimens was subjected to a...... load frequency of ten applications per minute and a second set to one application per hour simulating static cracks, however limiting the ingress hampering effects of autogenous healing and a possible dense precipitation on the crack faces. The averaged chloride exposure interval of the crack faces was...

  18. Tetracalcium phosphate composite containing quaternary ammonium dimethacrylate with antibacterial properties

    Science.gov (United States)

    Cheng, Lei; Weir, Michael D.; Limkangwalmongkol, Penwadee; Hack, Gary D.; Xu, Hockin H. K.; Chen, Qianming; Zhou, Xuedong

    2012-01-01

    Tooth caries is a carbohydrate-modified bacterial infectious disease, and recurrent caries is a frequent reason for restoration failure. The objective of this study was to develop a novel antibacterial composite using tetracalcium phosphate (TTCP) fillers and bis(2-methacryloyloxy-ethyl) dimethyl-ammonium bromide, which is a quaternary ammonium dimethacrylate (QADM). QADM was synthesized using 2-(N,N-dimethylamino)ethyl methacrylate and 2-bromoethyl methacrylate and incorporated into a resin. The resin was filled with 40% TTCP and 30% glass particles. The following QADM mass fractions in the composite were tested: 0%, 6%, 12%, and 18%. Streptococcus mutans biofilms were formed on the composites and the colony-forming units (CFUs), metabolic activity, and lactic acid production were measured. The TTCP-QADM composite had flexural strength and elastic modulus similar to those of two commercial composites (p > 0.1). Increasing the QADM content in TTCP composite greatly decreased the bacteria growth and biofilm matrix production. There were significantly more dead bacteria with increasing QADM content. TTCP composite containing 18% QADM had biofilm CFU, metabolic activity, and acid production about half of those without QADM. Inversely linear relationships were established between QADM mass fraction and S. mutans biofilm CFU, metabolic activity, and acid production, with correlation coefficients R2 ≥ 0.98. In conclusion, TTCP-QADM composites were developed and the effect of QADM mass fraction on the antibacterial properties of the composite was determined for the first time. The novel TTCP-QADM composites possessing a strong antibacterial capability, together with calcium phosphate ion release and good mechanical properties, are promising for dental restorations to reduce biofilm growth and recurrent caries. PMID:22190356

  19. Use of ASP for Removal of Fluorine and Ammonium Ions

    International Nuclear Information System (INIS)

    The purified zeolites from Bayah, Lampung dan Tasik have been modified into microporous alumino-silico phosphate (ASP) which could be used as anion and cation exchangers. ASP has been prepared by mixing purified zeolites and ammonium dihydrogen phosphate in weight ratios of 1 :1, 1 :5 and 5:1. The materials have been characterized by XRF, XRD and TG. The ion-exchange experiments have been performed by batch method for various concentrations of 0.01, 0.04, 0.08, 0.2 and O,4 NF and NH4 ion. Column experiment has been performed for: 500 ppm of ion F ( 0,026 N) and 100 ppm (0.0055 N) of ion NH4 concentrations respectively, fed into 1 cm diameter column containing 3 g pure ion exchangers. From batch experiment the fluorine sorption increases following the increase the concentration and F could be adsorbed up to about 1.09 -9.17 eq/kg for in the range of concentration 0.01 - 0.08 N. For higher fluorine concentration, the fluorine sorption tends to fluctuate. The ammonium sorption experiments obtain similar results for purified zeolites and ASP. The ion could be absorbed up to about 1.09 - 14.24 eq/kg. In column experiment, 1 g ASP could absorb fluorine up to about 278,48 - 334,19 BV ( 900-1300 ml) at 50% BT, and absorb NH4 about 219.64 - 297.17 BV (850 -1150 ml) separately. These result shows that the ASP might be a potential material to be used for removal of ion F and NH4 from the waste generayed in the fuel element fabrication

  20. PCDD/Fs' suppression by sulfur-amine/ammonium compounds.

    Science.gov (United States)

    Fu, Jian-Ying; Li, Xiao-Dong; Chen, Tong; Lin, Xiao-Qing; Buekens, Alfons; Lu, Sheng-Yong; Yan, Jian-Hua; Cen, Ke-Fa

    2015-03-01

    Three distinct -S and -NH2 or NH4(+) containing compounds, including ammonium thiosulfate, aminosulfonic acid and thiourea, were studied as polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) inhibitors. All these three -S and -N containing compounds tested show strong suppression of PCDD/Fs formation, especially for thiourea which has not been studied before. With a (S+N)/Cl molar ratio of only 0.47, thiourea could inhibit 97.3% of PCDD/Fs and even 99.8% of I-TEQ. At an unusually high de novo test temperature (650 °C), the PCDD/Fs' formation was still very low but also the inhibition capacity of thiourea was weak, with an efficiency of 59% for PCDD/Fs when with a (S+N)/Cl molar ratio of 1.40. The results also revealed that the inhibition capability of the combined -S/-NH2 or -S/NH4(+) suppressant was strongly influenced by both the nature of the functional group of nitrogen and the value of the molar ratio (S+N)/Cl. The amine functional group -NH2 tends to be more efficient than ammonium NH4(+) and within a certain range a higher (S+N)/Cl value leads to a higher inhibition efficiency. Moreover, the emission of gases was continuously monitored: the Gasmet results revealed that SO2, HCN and NH3 were the most important decomposition products of thiourea. Thiourea is non-toxic, environment-friendly and can be sprayed into the post-combustion zone in form of powder or aqueous solution. The cost of thiourea at least can be partially compensated by its high inhibition efficiency. Therefore, the application of thiourea in a full-scale incinerator system is promising and encouraging. PMID:25481352

  1. Leaching kinetics of malachite in ammonium carbonate solutions

    Science.gov (United States)

    Oudenne, Paul D.; Olson, Ferron A.

    1983-03-01

    Leaching of malachite was conducted with ammonium carbonate as lixiviant and with temperature, lixiviant concentration, and particle size as variables. Two stages of reaction were found. In Stage I, the initial dissolution of malachite proceeds rapidly, but after about 10 pct reaction the rate is reduced by surface blockage due to the presence of a needle-structured intermediate, presumably Cu(OH)2. Subsequently, malachite and the intermediate dissolve concurrently. In Stage II, after 90 pct reaction, essentially all of the malachite has dissolved and only the intermediate remains. It dissolves in Stage II. The activation energy is 64 kJ/mole (15.3 kcal/mole) for Stage I and 75 kJ/mole (18 kcal/mole) for Stage II. The rate of reaction in Stage I is proportional to the reciprocal of particle size and is 0.8 order with respect to the concentration of ammonium carbonate. The structures of leaching residues were studied using a scanning electron microscope. The kinetic data (activation energy and entropy), particle size and concentration dependence, residue morphology, and general leaching behavior evident from microscopic monitoring during leaching were used to develop the geometric equation for leaching in Stage I. The equation, based on a heterogeneous reaction with geometric rate control, is: 1 - (1 - α 1/3 = K01/r0/[(NH4)2C03]0.8 exp(-64,000/RT)t. It was deduced that initial steps in reaction were: (1) release of Cu2+ from malachite; (2) initial complexing with ammonia to form Cu(NH3)2+; and (3) subsequent complexing to produce Cu(NH3){4/2+} which is stable in solution at pH 8.8, the buffered pH of reaction. Stage II appears to be a similar reaction except that the reaction obeys cylindrical geometry instead of spherical geometry as in Stage I.

  2. Anodic Behavior of Alloy 22 in Calcium Chloride and in Calcium Chloride Plus Calcium Nitrate Brines

    Energy Technology Data Exchange (ETDEWEB)

    Evans, K J; Day, S D; Ilevbare, G O; Whalen, M T; King, K J; Hust, G A; Wong, L L; Estill, J C; Rebak, R B

    2003-05-13

    Alloy 22 (UNS N60622) is a nickel-based alloy, which is extensively used in aggressive industrial applications, especially due to its resistance to localized corrosion and stress corrosion cracking in high chloride environments. The purpose of this work was to characterize the anodic behavior of Alloy 22 in concentrated calcium chloride (CaCl{sub 2}) brines and to evaluate the inhibitive effect of nitrate, especially to localized corrosion. Standard electrochemical tests such as polarization resistance and cyclic polarization were used. Results show that the corrosion potential of Alloy 22 was approximately -360 mV in the silver-silver chloride (SSC) scale and independent of the tested temperature. Cyclic polarization tests showed that Alloy 22 was mainly susceptible to localized attack in 5 M CaCl{sub 2} at 75 C and higher temperatures. The addition of nitrate in a molar ratio of chloride to nitrate equal to 10 increased the onset of localized corrosion to approximately 105 C. The addition of nitrate to the solution also decreased the uniform corrosion rate and the passive current of the alloy.

  3. Interactions between chloride ingress and carbonation in cementitious materials

    OpenAIRE

    SAILLIO, Mickael; BARBERON, Fabien; BAROGHEL BOUNY, Véronique; GEGOUT, Philippe; PLATRET, Gérard; D'ESPINOSE DE LA CAILLERIE, JB

    2011-01-01

    Carbonation and chloride attacks are the major causes of reinforced concrete (RC) structure deterioration by initiation of steel rebar corrosion. These attacks are usually studied separately in the literature. Chloride-induced corrosion takes place mainly in marine environment or in the case of contact with deicing salts, while carbonation is systematically present in all RC structures at a variable degree. Since carbonation leads to significant microstructure changes, the effect of chloride ...

  4. Surface Chloride Concentration of Concrete under Shallow Immersion Conditions

    OpenAIRE

    Jun Liu; Kaifeng Tang; Dong Pan; Zongru Lei; Weilun Wang; Feng Xing

    2014-01-01

    Deposition of chloride ions in the surface layer of concrete is investigated in this study. In real concrete structure, chloride ions from the service environment can penetrate into concrete and deposit in the surface layer, to form the boundary condition for further diffusion towards the interior. The deposit amount of chloride ions in the surface layer is normally a function of time, rather than a constant. In the experimental investigation, concrete specimens with different mix proportions...

  5. Photo-Fenton-like degradation of azo dye methyl orange using synthetic ammonium and hydronium jarosite

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Zhihui [Department of Chemistry, College of Science, Nanjing Agricultural University, Nanjing 210095 (China); Liang, Jianru [Department of Environmental Engineering, College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing 210095 (China); Zhou, Lixiang, E-mail: lxzhou@njau.edu.cn [Department of Environmental Engineering, College of Resources and Environmental Sciences, Nanjing Agricultural University, Nanjing 210095 (China)

    2013-01-05

    Highlights: Black-Right-Pointing-Pointer Hydronium and ammonium jarosite could catalyze the oxidation of methyl orange in photo-Fenton-like process. Black-Right-Pointing-Pointer The oxidation process is essentially heterogeneous, not homogeneous. Black-Right-Pointing-Pointer Hydronium jarosite has stronger reactivity than ammonium jarosite. - Abstract: Ammonium and hydronium jarosite were prepared by hydrothermal method with urea as the homogeneous precipitant. X-ray diffraction, field-emission scanning electron microscope, X-ray photoelectron spectrum, UV-vis spectra and fourier transform infrared spectrum were used to characterize the resulting products. The photodegradation efficiency of the prepared ammonium and hydronium jarosite was studied in a photo-Fenton-like process using methyl orange (MO) as target pollutant. The photocatalytic degradation of MO over synthetic ammonium and hydronium jarosite under various conditions, such as catalysts loading, H{sub 2}O{sub 2} concentration and initial pH, has been investigated. Results show that ammonium and hydronium jarosite have satisfactory photocatalysis effect in degradation of MO azo dye, and that the reactivity of hydronium jarosite toward the mineralization of MO was higher than that of ammonium jarosite. The novel ammonium and hydronium jarosite catalysts would be important for industrial applications due to their high photoactivity, little iron leaching and low cost.

  6. Ammonium across a Selective Polymer Inclusion Membrane : Characterization, Transport, and Selectivity

    NARCIS (Netherlands)

    Casadella, Anna; Schaetzle, Olivier; Loos, Katja

    2016-01-01

    The recovery of ammonium from urine requires distinguishing and excluding sodium and potassium. A polymer inclusion membrane selective for ammonium is developed using an ionophore based on pyrazole substituted benzene. The interactions of the components are studied, as well as their effect on transp

  7. Temperature effects in the absorption spectra and exciton luminescence in ammonium halides

    International Nuclear Information System (INIS)

    Warm-up behavior of the first maximum exciton absorption bands in ammonium halides is explored. Under phase transition occurs offset of bands, bound both with changing a parameter of lattice, and efficient mass of exciton. Warm-up dependency of quantum leaving a luminescence of self-trapped excitons in ammonium halides is measured. (author)

  8. Effects of Ammonium and Nitrite on Growth and Competitive Fitness of Cultivated Methanotrophic Bacteria▿

    OpenAIRE

    Nyerges, Györgyi; Han, Suk-Kyun; Stein, Lisa Y.

    2010-01-01

    The effects of nitrite and ammonium on cultivated methanotrophic bacteria were investigated. Methylomicrobium album ATCC 33003 outcompeted Methylocystis sp. strain ATCC 49242 in cultures with high nitrite levels, whereas cultures with high ammonium levels allowed Methylocystis sp. to compete more easily. M. album pure cultures and cocultures consumed nitrite and produced nitrous oxide, suggesting a connection between denitrification and nitrite tolerance.

  9. Nitrogen removal by autotrophic ammonium oxidizing bacteria enrichment under anaerobic conditions

    Directory of Open Access Journals (Sweden)

    Pongsak (Lek Noophan

    2008-07-01

    Full Text Available Sludge from an anoxic tank at the centralized wastewater treatment plant, Nong Khaem, Bangkok, Thailand, was inoculatedin an anaerobic sequencing batch reactor (ASBR. The optimal compositions and operating conditions of the stock of autotrophic ammonium oxidizing bacteria medium were determined. The process of oxidizing ammonium with bacteria under anaerobic conditions is often referred to as the Anammox process (NO2- to N2 gas, using NH4+ as the electron donor and NO2- as the electron acceptor. The startup period for the anammox culture took more than three months. With ammoniumand nitrite concentration ratios of 1:1.38 and 1:1.6, the nitrogen conversion rate zero order. Fluorescent in situ hybridization(FISH was used to identify specific autotrophic ammonium oxidizing bacteria (Nitrosomonas spp., Candidatus Brocadia anammoxidans, and Candidatus Kuenenia stuttgartiensis. Results from this work demonstrated a shift in the species of ammonium oxidizing bacteria from Nitrosomonas spp. to Candidati Brocadia anammoxidans and Kuenenia stuttgartiensis, with increased ammonium concentrations from 3 mM to 15 mM. Under NH4+:NO2- ratios of 1:1.38 and 1:1.6 the ammoniumoxidizing bacteria were able to remove both ammonium and nitrite simultaneously. The specific nitrogen removal rate of theanammox bacteria (Candidati Brocadia anammoxidans and Kuenenia stuttgartiensis was significantly higher than that of anaerobic ammonium oxidizing bacteria (Nitrosomonas spp.. Anaerobic ammonium oxidizing bacteria (Candidati Brocadia anammoxidans and Kuenenia stuttgartiensis are strict anaerobes.

  10. 76 FR 23569 - Termination of the Suspension Agreement on Solid Fertilizer Grade Ammonium Nitrate From the...

    Science.gov (United States)

    2011-04-27

    ... Antidumping Duty Investigation: Solid Fertilizer Grade Ammonium Nitrate from the Russian Federation, 64 FR... Less Than Fair Value: Solid Fertilizer Grade Ammonium Nitrate from the Russian Federation, 65 FR 1139..., Investigation No. 731-TA-856 (Preliminary), 64 FR 50103 (September 15, 1999)). On January 7, 2000,...

  11. Evaluation on the microbial interactions of anaerobic ammonium oxidizers and heterotrophs in Anammox biofilm

    DEFF Research Database (Denmark)

    Ni, Bing-Jie; Ruscalleda, Mael; Smets, Barth F.

    2012-01-01

    Anaerobic ammonium oxidation (Anammox) is a cost-effective new process to treat high-strength nitrogenous wastewater. In this work, the microbial interactions of anaerobic ammonium oxidizers and heterotrophs through the exchange of soluble microbial products (SMP) in Anammox biofilm and the affec...

  12. Ammonium-oxidizing bacteria facilitate aerobic degradation of sulfanilic acid in activated sludge.

    Science.gov (United States)

    Chen, Gang; Ginige, Maneesha P; Kaksonen, Anna H; Cheng, Ka Yu

    2014-01-01

    Sulfanilic acid (SA) is a toxic sulfonated aromatic amine commonly found in anaerobically treated azo dye contaminated effluents. Aerobic acclimatization of SA-degrading mixed microbial culture could lead to co-enrichment of ammonium-oxidizing bacteria (AOB) because of the concomitant release of ammonium from SA oxidation. To what extent the co-enriched AOB would affect SA oxidation at various ammonium concentrations was unclear. Here, a series of batch kinetic experiments were conducted to evaluate the effect of AOB on aerobic SA degradation in an acclimatized activated sludge culture capable of oxidizing SA and ammonium simultaneously. To account for the effect of AOB on SA degradation, allylthiourea was used to inhibit AOB activity in the culture. The results indicated that specific SA degradation rate of the mixed culture was negatively correlated with the initial ammonium concentration (0-93 mM, R²= 0.99). The presence of AOB accelerated SA degradation by reducing the inhibitory effect of ammonium (≥ 10 mM). The Haldane substrate inhibition model was used to correlate substrate concentration (SA and ammonium) and oxygen uptake rate. This study revealed, for the first time, that AOB could facilitate SA degradation at high concentration of ammonium (≥ 10 mM) in an enriched activated sludge culture. PMID:25259503

  13. 76 FR 39847 - Solid Fertilizer Grade Ammonium Nitrate From the Russian Federation; Final Results of the...

    Science.gov (United States)

    2011-07-07

    ...: Solid Fertilizer Grade Ammonium Nitrate From the Russian Federation, 64 FR 45236 (August 19, 1999). On... Fertilizer Grade Ammonium Nitrate From the Russian Federation, 65 FR 42669 (July 11, 2000) (``Final... Results of Review.'' \\1\\ See Initiation of Five-Year (``Sunset'') Review, 76 FR 11202 (March 1,...

  14. 75 FR 56489 - Separation Distances of Ammonium Nitrate and Blasting Agents From Explosives or Blasting Agents...

    Science.gov (United States)

    2010-09-16

    ... Ammonium Nitrate and Blasting Agents From Explosives or Blasting Agents (2002R-226P) AGENCY: Bureau of... CFR 555.220 set forth a table of separation distances of ammonium nitrate and blasting agents from explosives or blasting agents followed by six explanatory notes. Note three (3) states that the...

  15. Nitrogen phosphoric fertilizer production technology on the base of Central Kyzylkum phosphorites and ammonium nitrate melt

    OpenAIRE

    Shavkat Namazov; Akhmed Reymov; Nazarkul Pirmanov; Rashid Kurbaniyazov

    2012-01-01

    The process of obtaining nitrogen phosphoric fertilizer by introduction Central Kyzylkum phosphates and ammonium nitrate melt is studied. On the base of these results production technology diagram for nitrogen phosphoric fertilizer is offered. The given technology was approved and developed at the functioning devices of OJSC “NAVOIAZOT” ammonium nitrate shop.

  16. Nitrogen phosphoric fertilizer production technology on the base of Central Kyzylkum phosphorites and ammonium nitrate melt

    Directory of Open Access Journals (Sweden)

    Shavkat Namazov

    2012-11-01

    Full Text Available The process of obtaining nitrogen phosphoric fertilizer by introduction Central Kyzylkum phosphates and ammonium nitrate melt is studied. On the base of these results production technology diagram for nitrogen phosphoric fertilizer is offered. The given technology was approved and developed at the functioning devices of OJSC “NAVOIAZOT” ammonium nitrate shop.

  17. Novel carbohydrate-based chiral ammonium ionic liquids derived from isomannide

    DEFF Research Database (Denmark)

    Kumar, Vineet; Pei, Cao; Olsen, Carl E.;

    2008-01-01

    This report describes the synthesis and characterization of novel carbohydrate-based chiral ammonium ionic liquids using isomannide as a biorenewable substrate. The diastereomeric interactions of these chiral ammonium ionic liquids with racemic Mosher's acid salt have been studied using NMR, whic...

  18. Photo-Fenton-like degradation of azo dye methyl orange using synthetic ammonium and hydronium jarosite

    International Nuclear Information System (INIS)

    Highlights: ► Hydronium and ammonium jarosite could catalyze the oxidation of methyl orange in photo-Fenton-like process. ► The oxidation process is essentially heterogeneous, not homogeneous. ► Hydronium jarosite has stronger reactivity than ammonium jarosite. - Abstract: Ammonium and hydronium jarosite were prepared by hydrothermal method with urea as the homogeneous precipitant. X-ray diffraction, field-emission scanning electron microscope, X-ray photoelectron spectrum, UV–vis spectra and fourier transform infrared spectrum were used to characterize the resulting products. The photodegradation efficiency of the prepared ammonium and hydronium jarosite was studied in a photo-Fenton-like process using methyl orange (MO) as target pollutant. The photocatalytic degradation of MO over synthetic ammonium and hydronium jarosite under various conditions, such as catalysts loading, H2O2 concentration and initial pH, has been investigated. Results show that ammonium and hydronium jarosite have satisfactory photocatalysis effect in degradation of MO azo dye, and that the reactivity of hydronium jarosite toward the mineralization of MO was higher than that of ammonium jarosite. The novel ammonium and hydronium jarosite catalysts would be important for industrial applications due to their high photoactivity, little iron leaching and low cost.

  19. N,N-Dimethyldehydroabietylammonium chloride ethanol monosolvate

    Directory of Open Access Journals (Sweden)

    Xiu-Zhi Huang

    2013-06-01

    Full Text Available The title compound {systematic name: 1-[(1R,4aS,10aR-7-isopropyl-1,4a-dimethyl-1,2,3,4,4a,9,10,10a-octahydrophenanthren-1-yl]-N,N-dimethylmethanaminium chloride ethanol monosolvate}, C22H36N+·Cl−·C2H6O, was synthesized from dehydroabietylamine by N-methylation with formaldehyde/formic acid and transformation into the hydrochloride. The dehydroabietyl moiety exhibits the usual conformation with the two cyclohexane rings in chair and half-chair conformations and a trans-ring junction. The crystal structure is built up from columns of the dehydroabietyl moieties stacked along the a axis. These columns are held together by the chloride ions via N—H...Cl and C—H...Cl interactions, which establish a two-dimensional network parallel to (010. The ethanol solvent molecules are located between the columns and anchored via O—H...Cl hydrogen bonds.

  20. Radiolytic preparation of anhydrous tin (2) chloride

    Science.gov (United States)

    Philipp, W. H.; Marsik, S. J.

    1973-01-01

    Anhydrous tin (2) chloride (SnCl2) is prepared by radiolysis with high energy electrons of a tin (4) chloride (SnCl4) solution in heptane. The SnCl4 is reduced to insoluble SNCl2. The energy yield, G(SnCl2), molecules of SnCl2, produced per 100 eV, increases with SnCl4 concentration from 1.6 at 0.15 M SnCl4 to 3.1 at 3.0 M SnCl4. Other parameters such as temperature total dose and beam current have little influence on G(SnCl2). The method may be used to prepare other metal halides if the higher valence, more covalent metal halide is soluble in aliphatic hydrocarbons and the lower more ionic metal halide is insoluble. The reaction mechanism is discussed; the radiolysis of both heptane and SnCl4 is involved. At high SnCl4 concentration G(SnCl2) appears to be limited by the yield of SnC13 radicals.

  1. Cobalt electrodeposition using urea and choline chloride

    International Nuclear Information System (INIS)

    The electrochemical behavior of Co(II) in urea-choline chloride-CoCl2 melt was investigated by cyclic voltammetry at 373 K. The results show that the reaction of Co(II) to Co is irreversible and it proceeds via a one-step two electrons transfer process. The diffusion coefficient of Co(II) was estimated to be 1.7 × 10−6 cm2 s−1 at 373 K. Electrodeposition of cobalt was studied at different cathodic potentials (-0.80 to -0.95 V) and at different temperatures (353 to 383 K) in eutectic mixture of choline chloride and urea (1:2 molar ratio). The deposits were characterized using scanning electron microscope (SEM), energy-dispersive spectroscopy (EDS), and X-ray diffraction (XRD). SEM images show that uniform, dense, and compact deposits were obtained at -0.80 V within a temperature range of 353 K to 373 K. EDS and XRD analysis confirm that high-purity metallic Co deposits were obtained

  2. The electrodeposition of lead from chloride electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Wright, A.

    1986-11-28

    At low current densities, lead was deposited onto a lead substrate as a fine powder that did not adhere well to the substrate. At higher current densities dendritic growth occurred. Lead does not adhere to a graphite substrate and, since copper and titanium substrates require higher cell voltages than lead substrates, these three substrates were rejected. The temperature of the electrolyte must be maintained above 69/sup 0/C to avoid the precipitation of lead chloride in the cell. Optimum current efficiencies at the anode and cathode were obtained at 80/sup 0/C, and no improvement in the morphology of the deposit was observed at higher temperatures. A combination of Quebracho extract and cuprous ions achieved the greatest improvement in the morphology of the deposit, while maintaining high current efficiencies at the anode and cathode. However, when the deposition time was increased, dendritic growth was much in evidence. A compact, adherent deposit of lead could not be obtained from chloride electrolytes. 22 refs., 21 figs., 11 tabs.

  3. Open cycle lithium chloride cooling system

    Science.gov (United States)

    Lenz, T. G.; Loef, G. O. G.; Iyer, R.; Wenger, J.

    1983-05-01

    A lithium chloride open cycle absorption chiller has been designed, built and tested. Solution reconcentration takes place in a small counter current packed column supplied with solar heated air. Removal of noncondensable gases that enter the chiller dissolved in the strong solution and the make-up refrigerant streams is accomplished by a liquid-jet ejector and a small vacuum pump. Cooling capacities approaching 1.4 tons and COP levels of 0.58 have been achieved at non-optimum operating conditions. Test results from preliminary system operation suggest that mass transfer processes in both the packed column reconcentrator and the absorber are controlled by concentration gradients in the lithium chloride solution. Liquid phase controlled mass transfer dictates an operating strategy different from the previously assumed gas phase controlled process to obtain maximum rates of evaporation in the packed column. Determination of optimal operating conditions leading to decreased electrical power consumption and improved cooling capacity and coefficient of performance will require further analysis and testing.

  4. Fault locator of an allyl chloride plant

    Directory of Open Access Journals (Sweden)

    Savković-Stevanović Jelenka B.

    2004-01-01

    Full Text Available Process safety analysis, which includes qualitative fault event identification, the relative frequency and event probability functions, as well as consequence analysis, was performed on an allye chloride plant. An event tree for fault diagnosis and cognitive reliability analysis, as well as a troubleshooting system, were developed. Fuzzy inductive reasoning illustrated the advantages compared to crisp inductive reasoning. A qualitative model forecast the future behavior of the system in the case of accident detection and then compared it with the actual measured data. A cognitive model including qualitative and quantitative information by fuzzy logic of the incident scenario was derived as a fault locator for an ally! chloride plant. The obtained results showed the successful application of cognitive dispersion modeling to process safety analysis. A fuzzy inductive reasoner illustrated good performance to discriminate between different types of malfunctions. This fault locator allowed risk analysis and the construction of a fault tolerant system. This study is the first report in the literature showing the cognitive reliability analysis method.

  5. Estimation of trace chloride in nuclear grade sodium

    International Nuclear Information System (INIS)

    The author represents a method to determinate trace levels of chloride in sodium coolant in a fast neutron reactor. Vacuum distillation is used for separating chloride from sodium matrix. After separation, matrix interference from sodium salts is eliminated and a large sample amount can be taken for analysing chloride. In contrast with other similar mercuric thiocyanate colorimetric method in China, this method minimizes a glaring blank of colorimetric solution and determining influence of temperature. Therefore, it increases the precision in analysing chloride. The results of the research demonstrate that when a level of chloride in sodium is less than 1 μg/g, the precision is 37% (n = 10). The recoveries of chloride in high pure sodium demonstrate that when 15-30 μg/g of chloride is added in sodium, the recovery is 97.8%-98.6% and when 4μg/g of chloride is added, then the average recovery is 99.2%. And the relative standard deviation is 16.2% (n =7). It is demonstrated that a monitoring requirement of chloride can be satisfied with this method in coolant of sodium in a fast neutron reactor

  6. Interpretation of postmortem vitreous concentrations of sodium and chloride.

    Science.gov (United States)

    Zilg, B; Alkass, K; Berg, S; Druid, H

    2016-06-01

    Vitreous fluid can be used to analyze sodium and chloride levels in deceased persons, but it remains unclear to what extent such results can be used to diagnose antemortem sodium or chloride imbalances. In this study we present vitreous sodium and chloride levels from more than 3000 cases. We show that vitreous sodium and chloride levels both decrease with approximately 2.2mmol/L per day after death. Since potassium is a well-established marker for postmortem interval (PMI) and easily can be analyzed along with sodium and chloride, we have correlated sodium and chloride levels with the potassium levels and present postmortem reference ranges relative the potassium levels. We found that virtually all cases outside the reference range show signs of antemortem hypo- or hypernatremia. Vitreous sodium or chloride levels can be the only means to diagnose cases of water or salt intoxication, beer potomania or dehydration. We further show that postmortem vitreous sodium and chloride strongly correlate and in practice can be used interchangeably if analysis of one of the ions fails. It has been suggested that vitreous sodium and chloride levels can be used to diagnose drowning or to distinguish saltwater from freshwater drowning. Our results show that in cases of freshwater drowning, vitreous sodium levels are decreased, but that this mainly is an effect of postmortem diffusion between the eye and surrounding water rather than due to the drowning process, since the decrease in sodium levels correlates with immersion time. PMID:27105154

  7. Durability of cracked fibre reinforced concrete structures exposed to chlorides

    DEFF Research Database (Denmark)

    Hansen, Ernst Jan De Place; Ekman, Tom; Hansen, Kurt Kielsgaard

    Durability studies are carried out by subjecting FRC-beams to combined mechanical and environmental load. Mechanical load is obtained by exposing beams to 4-point bending until a predefined crack width is reached, using a newly developed test setup. Exposure to a concentrated chloride solution is...... used as environmental load. The chloride penetration is characterized both qualitatively (UV-test) and quantitatively (chloride profile) and by microscopy. The test programme involves three different concrete qualities. Both steel fibres and polypropylene fibres are used in the concrete beams as well...... as main reinforcement. The effect of the cracks, the fibres and the concrete quality on the chloride penetration is studied....

  8. Catalytic Conversion of Cellulose to Levulinic Acid by Metal Chlorides

    Directory of Open Access Journals (Sweden)

    Beixiao Zhang

    2010-08-01

    Full Text Available The catalytic performance of various metal chlorides in the conversion of cellulose to levulinic acid in liquid water at high temperatures was investigated. The effects of reaction parameters on the yield of levulinic acid were also explored. The results showed that alkali and alkaline earth metal chlorides were not effective in conversion of cellulose, while transition metal chlorides, especially CrCl3, FeCl3 and CuCl2 and a group IIIA metal chloride (AlCl3, exhibited high catalytic activity. The catalytic performance was correlated with the acidity of the reaction system due to the addition of the metal chlorides, but more dependent on the type of metal chloride. Among those metal chlorides, chromium chloride was found to be exceptionally effective for the conversion of cellulose to levulinic acid, affording an optimum yield of 67 mol % after a reaction time of 180 min, at 200 °C, with a catalyst dosage of 0.02 M and substrate concentration of 50 wt %. Chromium metal, most of which was present in its oxide form in the solid sample and only a small part in solution as Cr3+ ion, can be easily separated from the resulting product mixture and recycled. Finally, a plausible reaction scheme for the chromium chloride catalyzed conversion of cellulose in water was proposed.

  9. Ammonium in Witwatersrand reefs: a possible indicator of metamorphic fluid flow

    International Nuclear Information System (INIS)

    Ammonium concentrations and NH4+/K ratios in the Kimberley Reef indicate chemical interaction with metamorphic fluids. The data, although preliminary, also suggests a gold-ammonium association in that higher gold levels are related to higher NH4+/K ratios. Samples from the Ventersdorp Contact Reef are also hydrothermally altered but no ammonium was detected. The low ammonium concentrations suggest that over-printing by NH4-bearing metamorphic fluids was negligible. From this it is concluded that chemically different fluid systems must have been operative, probably at different times, during Witwatersrand history. It appears, therefore, that ammonium geochemistry is potentially useful in the study of fluid flow and related gold (re)distribution in Witwatersrand reefs. 17 refs., 2 figs., 1 tab

  10. Removal of ammonium ions from wastewater: A short review in development of efficient methods

    Directory of Open Access Journals (Sweden)

    V.K. Gupta

    2015-04-01

    Full Text Available Ammonium ions wastewater pollution has become one of the most serious environmental problems today. The treatment of ammonium ions is a special concern due to their recalcitrance and persistence in the environment. In recent years, various methods for ammonium ion removal from wastewater have been extensively studied. This paper reviews the current methods that have been used to treat ammonium ion wastewater and evaluates these techniques. These technologies include ion exchange, adsorption, biosorption, wet air oxidation, biofiltration, diffused aeration, nitrification and denitrification methods. About 75 published studies (1979-2015 are reviewed in this paper. It is evident from the literature survey articles that ion exchange, adsorption and biological technology are the most frequently studied for the treatment of ammonium ion wastewater.

  11. Kinetics Analysis on Mixing Calcination Process of Fly Ash and Ammonium Sulfate

    Institute of Scientific and Technical Information of China (English)

    Peng Wang; Laishi Li; Dezhou Wei

    2014-01-01

    abstract The further development of the extraction of alumina that is produced in the calcination process of ammonium sulfate mixed with fly ash was limited because of the lack of systematic theoretical study. In order to aggrandize the research of the calcination process, the kinetics and reaction mechanism of the calcinations were studied. The result suggests that there are two stages in the calcination process, and the alumina extraction rate increases swiftly in the initial stage, but slows down increasing in the later stage. The apparent activation energy of the initial and later stages equals to 13.31 and 35.65 kJ·mol-1, respectively. In the initial stage, ammonium sulfate reacts directly with mullite in the fly ash to form ammonium aluminum sulfate, while in the later stage, alumi-num sulfate is formed by the reaction between ammonium aluminum sulfate and ammonium sulfate.

  12. Characterisation of ion transport in sulfonate based ionomer systems containing lithium and quaternary ammonium cations

    International Nuclear Information System (INIS)

    Two sulfonated ionomers based on poly(triethylmethyl ammonium 2-acrylamido-2-methyl-1-propane sulfonic acid) (PAMPS) and containing mixtures of Li+ and quaternary ammonium cations are characterised. The first system contains Li+ and the methyltriethyl ammonium cation (N1222) in a 1:9 molar ratio, and the 7Li NMR line widths showed that the Li+ ions are mobile in this system below the glass transition temperature (105 °C) and are therefore decoupled from the polymer segmental motion. The conductivity in this system was measured as 10−5 S cm−1 at 130 °C. A second PAMPS system containing Li+ and the dimethylbutylmethoxyethyl ammonium cation (N114(2O1)) in a 2:8 molar ratio showed much lower conductivities despite a significantly lower Tg (60 °C), possibly due to associations between the Li+ and the ether group on the ammonium cation, or between the latter cations and the sulfonate groups

  13. Interaction between Ammonium Toxicity and Green Tide Development Over Seagrass Meadows: A Laboratory Study

    Science.gov (United States)

    Moreno-Marín, Francisco; Vergara, Juan J.; Pérez-Llorens, J. Lucas; Pedersen, Morten F.; Brun, Fernando G.

    2016-01-01

    Eutrophication affects seagrasses negatively by increasing light attenuation through stimulation of biomass of fast-growing, bloom-forming algae and because high concentrations of ammonium in the water can be toxic to higher plants. We hypothesized nevertheless, that moderate amounts of nitrophilic macroalgae that coexists with seagrasses under eutrophic conditions, can alleviate the harmful effects of eutrophication on seagrasses by reducing ammonium concentrations in the seawater to non-toxic levels because such algae have a very large capacity to take up inorganic nutrients. We studied therefore how combinations of different ammonium concentrations (0, 25 and 50 μM) and different standing stocks of macroalgae (i.e. 0, 1 and 6 layers of Ulva sp.) affected survival, growth and net production of the seagrass Zostera noltei. In the absence of Ulva sp., increasing ammonium concentrations had a negative influence on the performance of Z. noltei. The presence of Ulva sp. without ammonium supply had a similar, but slightly smaller, negative effect on seagrass fitness due to light attenuation. When ammonium enrichment was combined with presence of Ulva sp., Ulva sp. ameliorated some of negative effects caused by high ammonium availability although Ulva sp. lowered the availability of light. Benthic microalgae, which increased in biomass during the experiment, seemed to play a similar role as Ulva sp.–they contributed to remove ammonium from the water, and thus, aided to keep the ammonium concentrations experienced by Z. noltei at relatively non-toxic levels. Our findings show that moderate amounts of drift macroalgae, eventually combined with increasing stocks of benthic microalgae, may aid seagrasses to alleviate toxic effects of ammonium under eutrophic conditions, which highlights the importance of high functional diversity for ecosystem resistance to anthropogenic disturbance. PMID:27035662

  14. Ammonium-induced calcium mobilization in 1321N1 astrocytoma cells

    International Nuclear Information System (INIS)

    High blood levels of ammonium/ammonia (NH4+/NH3) are associated with severe neurotoxicity as observed in hepatic encephalopathy (HE). Astrocytes are the main targets of ammonium toxicity, while neuronal cells are less vulnerable. In the present study, an astrocytoma cell line 1321N1 and a neuroblastoma glioma hybrid cell line NG108-15 were used as model systems for astrocytes and neuronal cells, respectively. Ammonium salts evoked a transient increase in intracellular calcium concentrations ([Ca2+]i) in astrocytoma (EC50 = 6.38 mM), but not in NG108-15 cells. The ammonium-induced increase in [Ca2+]i was due to an intracellular effect of NH4+/NH3 and was independent of extracellular calcium. Acetate completely inhibited the ammonium effect. Ammonium potently reduced calcium signaling by Gq protein-coupled receptors (H1 and M3) expressed on the cells. Ammonium (5 mM) also significantly inhibited the proliferation of 1321N1 astrocytoma cells. While mRNA for the mammalian ammonium transporters RhBG and RhCG could not be detected in 1321N1 astrocytoma cells, both transporters were expressed in NG108-15 cells. RhBG and RhBC in brain may promote the excretion of NH3/NH4+ from neuronal cells. Cellular uptake of NH4+/NH3 was mainly by passive diffusion of NH3. Human 1321N1 astrocytoma cells appear to be an excellent, easily accessible human model for studying HE, which can substitute animal studies, while NG108-15 cells may be useful for investigating the role of the recently discovered Rhesus family type ammonium transporters in neuronal cells. Our findings may contribute to the understanding of pathologic ammonium effects in different brain cells, and to the treatment of hyperammonemia

  15. Interaction between Ammonium Toxicity and Green Tide Development Over Seagrass Meadows: A Laboratory Study.

    Directory of Open Access Journals (Sweden)

    Francisco Moreno-Marín

    Full Text Available Eutrophication affects seagrasses negatively by increasing light attenuation through stimulation of biomass of fast-growing, bloom-forming algae and because high concentrations of ammonium in the water can be toxic to higher plants. We hypothesized nevertheless, that moderate amounts of nitrophilic macroalgae that coexists with seagrasses under eutrophic conditions, can alleviate the harmful effects of eutrophication on seagrasses by reducing ammonium concentrations in the seawater to non-toxic levels because such algae have a very large capacity to take up inorganic nutrients. We studied therefore how combinations of different ammonium concentrations (0, 25 and 50 μM and different standing stocks of macroalgae (i.e. 0, 1 and 6 layers of Ulva sp. affected survival, growth and net production of the seagrass Zostera noltei. In the absence of Ulva sp., increasing ammonium concentrations had a negative influence on the performance of Z. noltei. The presence of Ulva sp. without ammonium supply had a similar, but slightly smaller, negative effect on seagrass fitness due to light attenuation. When ammonium enrichment was combined with presence of Ulva sp., Ulva sp. ameliorated some of negative effects caused by high ammonium availability although Ulva sp. lowered the availability of light. Benthic microalgae, which increased in biomass during the experiment, seemed to play a similar role as Ulva sp.--they contributed to remove ammonium from the water, and thus, aided to keep the ammonium concentrations experienced by Z. noltei at relatively non-toxic levels. Our findings show that moderate amounts of drift macroalgae, eventually combined with increasing stocks of benthic microalgae, may aid seagrasses to alleviate toxic effects of ammonium under eutrophic conditions, which highlights the importance of high functional diversity for ecosystem resistance to anthropogenic disturbance.

  16. Interaction between Ammonium Toxicity and Green Tide Development Over Seagrass Meadows: A Laboratory Study.

    Science.gov (United States)

    Moreno-Marín, Francisco; Vergara, Juan J; Pérez-Llorens, J Lucas; Pedersen, Morten F; Brun, Fernando G

    2016-01-01

    Eutrophication affects seagrasses negatively by increasing light attenuation through stimulation of biomass of fast-growing, bloom-forming algae and because high concentrations of ammonium in the water can be toxic to higher plants. We hypothesized nevertheless, that moderate amounts of nitrophilic macroalgae that coexists with seagrasses under eutrophic conditions, can alleviate the harmful effects of eutrophication on seagrasses by reducing ammonium concentrations in the seawater to non-toxic levels because such algae have a very large capacity to take up inorganic nutrients. We studied therefore how combinations of different ammonium concentrations (0, 25 and 50 μM) and different standing stocks of macroalgae (i.e. 0, 1 and 6 layers of Ulva sp.) affected survival, growth and net production of the seagrass Zostera noltei. In the absence of Ulva sp., increasing ammonium concentrations had a negative influence on the performance of Z. noltei. The presence of Ulva sp. without ammonium supply had a similar, but slightly smaller, negative effect on seagrass fitness due to light attenuation. When ammonium enrichment was combined with presence of Ulva sp., Ulva sp. ameliorated some of negative effects caused by high ammonium availability although Ulva sp. lowered the availability of light. Benthic microalgae, which increased in biomass during the experiment, seemed to play a similar role as Ulva sp.--they contributed to remove ammonium from the water, and thus, aided to keep the ammonium concentrations experienced by Z. noltei at relatively non-toxic levels. Our findings show that moderate amounts of drift macroalgae, eventually combined with increasing stocks of benthic microalgae, may aid seagrasses to alleviate toxic effects of ammonium under eutrophic conditions, which highlights the importance of high functional diversity for ecosystem resistance to anthropogenic disturbance. PMID:27035662

  17. Preparation of Butyl Chloride from Butanol and Hydrochloric Acid Using Ionic Liquids as Catalyst%离子液体催化丁醇与盐酸反应制备丁基氯

    Institute of Scientific and Technical Information of China (English)

    孙爱军; 聂毅; 李春喜; 王子镐

    2008-01-01

    The catalytic performance of some quaternary ammonium salts for the liquid phase reaction of butanol and hydrochloric acid at different conditions was studied experimentally and compared with the traditional catalyst (ZnC12). The organic ammonium catalysts investigated include ionic liquids N-butyl-N-methyl imidazolium fluobo-rate ([BMIM][BF4]) and N-butyl-N-methylimidazolium chloride ([BMIM]Cl) as well as hydrochloric salts of N-methylimidazol ([HMIM]Cl), pyridine ([Hpy]Cl) and triethylamine ([HEt3N]Cl). It is shown that the intrinsic catalytic performance of all organic ammonium salts except [Het3N]Cl is slightly superior to ZnCl2, while the se-lectivity of butyl chloride is nearly at the same level around 96%. The conversion of butanol increases slightly with temperature and the catalyst amount added while the variation of selectivity is not obvious. Based on the recycle experiments, the ionic liquids as catalyst for the reaction of butanol and hydrochloric acid can be used more than 5 times, which suggests great potential of using ionic liquids as novel catalyst for such reactions.

  18. THE COMPATIBILITY OF BLENDS OF POLY(VINYL CHLORIDE) OR CHLORINATED POLY(VINYL CHLORIDE) WITH POLY(METHYL METHACRYLATE)

    Institute of Scientific and Technical Information of China (English)

    WANG Qingguo; CHENG Rongshi

    1988-01-01

    IR spectral shifts of carbonyl vibrational absorption for ethyl acetate, which acts analogically as the structural unit of poly(methyl methacrylate), in cyclohexane, chloroform, chlorinated paraffins, poly(vinyl chloride) and chlorinated poly(vinyl chloride) were measured. The results suggest that there are specific interactions between the carbonyl groups and the chlorinated hydrocarbons which could be responsible for the apparent compatibility of poly(vinyl chloride) -poly(methyl methacrylate) and chlorinated poly(vinyl chloride) -poly(methyl methacrylate) blends. Additionally, the effects of the preparation mode of blend films on phase separation and observed compatibility are discussed.

  19. Use of ammonium formate in QuEChERS for high-throughput analysis of pesticides in food by fast, low-pressure gas chromatography and liquid chromatography tandem mass spectrometry.

    Science.gov (United States)

    González-Curbelo, Miguel Ángel; Lehotay, Steven J; Hernández-Borges, Javier; Rodríguez-Delgado, Miguel Ángel

    2014-09-01

    The "quick, easy, cheap, effective, rugged, and safe" (QuEChERS) approach to sample preparation is widely applied in pesticide residue analysis, but the use of magnesium sulfate and other nonvolatile compounds for salting out in the method is not ideal for mass spectrometry. In this study, we developed and evaluated three new different versions of the QuEChERS method using more volatile salts (ammonium chloride and ammonium formate and acetate buffers) to induce phase separation and extraction of 43 representative pesticide analytes of different classes. Fast low-pressure gas chromatography tandem mass spectrometry (LPGC-MS/MS) and liquid chromatography (LC)-MS/MS were used for analysis. The QuEChERS AOAC Official Method 2007.01 was also tested for comparison purposes. Of the studied methods, formate buffering using 7.5g of ammonium formate and 15mL of 5% (v/v) formic acid in acetonitrile for the extraction of 15g of sample (5g for wheat grain) provided the best performance and practical considerations. Method validation was carried out with and without the use of dispersive solid-phase extraction for cleanup, and no significant differences were observed for the majority of pesticides. The method was demonstrated in quantitative analysis for GC- and LC-amenable pesticides in 4 representative food matrices (apple, lemon, lettuce, and wheat grain). With the typical exceptions of certain pH-dependent and labile pesticides, 90-110% recoveries and food applications. PMID:25047819

  20. Aspects of the magnetism of ferrous chloride

    International Nuclear Information System (INIS)

    This work is a critical review of the existing work on ferrous chloride and presents, as well, a number of new experimental results. First, a careful analysis of the level structure of ferrous ions in the crystalline field shows that the crystalline anisotropy is of the same order of magnitude as the exchange interactions, a feature which gives rise to some particular effects, such as an upward curvature of the magnetization curve at 0 K in a perpendicular magnetic field. Further, the very low temperature (T > 0.4 K) thermal variation of both the specific heat and magnetic susceptibility evidences a magnetic component in elementary excitations. This result suggests the presence of a large magneto-elastic coupling. Finally, an experimental study of the H-T phase diagram near TN and of the critical behaviour of the specific heat and parallel susceptibility was performed. (author)

  1. Phosphates behaviours in conversion of FP chlorides

    International Nuclear Information System (INIS)

    The spent electrolyte of the pyroprocessing by metal electrorefining method should be considered for recycling after removal of fission products (FP) such as, alkali metals (AL), alkaline earth metals (ALE), and/or rare earth elements (REE), to reduce the volume of high-level radioactive waste. Among the various methods suggested for this purpose is precipitation by converting FP from chlorides to phosphates. Authors have been carrying out the theoretical analysis and experiment showing the behaviours of phosphate precipitates so as to estimate the feasibility of this method. From acquired results, it was found that AL except lithium and ALE are unlikely to form phosphate precipitates. However their conversion behaviours including REE were compatible with the theoretical analysis; in the case of LaPO4 as one of the REE precipitates, submicron-size particles could be observed while that of Li3PO4 was larger; the precipitates were apt to grow larger at higher temperature; etc.

  2. Estimating the chloride transport in cement paste

    Directory of Open Access Journals (Sweden)

    Princigallo, A.

    2012-06-01

    Full Text Available A method was developed to measure the diffusion coefficient of chloride ions in cement paste based on an analytical solution to Fick’s 2nd law in a cylindrical coordinate system. This natural method yielded diffusivity results within as little as a month. Testing time was reduced by exploiting the three-dimensional inward flux in the specimen. In an attempt to determine the saturation concentration, dense portland cement pastes were exposed to a concentrated chloride solution. The method proved to be useful for exploring cement hydration-induced changes in the diffusion coefficient of cement paste.

    Se ha desarrollado un método para medir el coeficiente de difusión de los iones cloruro en la pasta de cemento, partiendo de una aplicación analítica de la segunda ley de Fick en un sistema de coordinadas cilíndrico. Este método, que es natural, demostró ser capaz de producir resultados de difusividad en tan solo un mes. Se consiguió reducir el tiempo de ensayo mediante el aprovechamiento de la tridimensionalidad del flujo desde el exterior al interior de la probeta. A fin de determinar la concentración de saturación, se sometieron las pastas de cemento Portland a una disolución de cloruros concentrada. Este método resultó ser útil en el estudio de los cambios del coeficiente de difusión de la pasta de cemento provocados por las reacciones de hidratación que tienen lugar en esta.

  3. Coordination compounds of transition metal chlorides with tetrazoles

    International Nuclear Information System (INIS)

    Coordination compounds (CC) of Co(2), Ni(2), Cu(2), Cd(2) chlorides with tetrazole and Ni(2) and Cd(2) chloride CC with tetrazolylhydrazone benzaldehyde are synthesized. The compounds are characterized by electron- and IR-spectroscopy, magnetic measurements (78-300 K), radiography. Conclusions are made on polynuclear structure of coordination compounds and Msup((2)) octahedron coordination

  4. Microwave Mapping Demonstration Using the Thermochromic Cobalt Chloride Equilibrium

    Science.gov (United States)

    Nguyen, Vu D.; Birdwhistell, Kurt R.

    2014-01-01

    An update to the thermochromic cobalt(II) chloride equilibrium demonstration is described. Filter paper that has been saturated with aqueous cobalt(II) chloride is heated for seconds in a microwave oven, producing a color change. The resulting pink and blue map is used to colorfully demonstrate Le Châtelier's principle and to illuminate the…

  5. Probabilistic Models and Computational Methods for Chloride Ingress in Concrete

    DEFF Research Database (Denmark)

    Engelund, S.

    Within the last decades it has been recognized that reinforced concrete structures are subject to a number of destructive mechanisms which might affect the structure in such a way that it is not able to fulfil its purpose efficiently. The present report focuses on chloride ingress and chloride-in...

  6. Prostaglandin synthetase inhibitor in an infant with congenital chloride diarrhoea.

    OpenAIRE

    Minford, A M; Barr, D G

    1980-01-01

    Hyper-reninaemia, hypokaluria, and hypokalaemia in an infant with congenital chloride diarrhoea improved during treatment with a prostaglandin synthetase inhibitor, ketoprofen. There was evidence of increased activity of therenin-aldosterone system when ketoprofen was stopped. It is suggested that prostaglandins may be involved in stimulating the renin-aldosterone system in congenital chloride diarrhoea.

  7. Chlorides behavior in raw fly ash washing experiments

    International Nuclear Information System (INIS)

    Chloride in fly ash from municipal solid waste incinerators (MSWIs) is one of the obstructive substances in recycling fly ash as building materials. As a result, we have to understand the behavior of chlorides in recycling process, such as washing. In this study, we used X-ray absorption near edge structure (XANES) and X-ray diffraction (XRD) to study the chloride behavior in washed residue of raw fly ash (RFA). We found that a combination of XRD and XANES, which is to use XRD to identify the situation of some compounds first and then process XANES data, was an effective way to explain the chlorides behavior in washing process. Approximately 15% of the chlorine in RFA was in the form of NaCl, 10% was in the form of KCl, 51% was CaCl2, and the remainder was in the form of Friedel's salt. In washing experiments not only the mole percentage but also the amount of soluble chlorides including NaCl, KCl and CaCl2 decreases quickly with the increase of liquid to solid (L/S) ratio or washing frequency. However, those of insoluble chlorides decrease slower. Moreover, Friedel's salt and its related compound (11CaO.7Al2O3.CaCl2) were reliable standards for the insoluble chlorides in RFA, which are strongly related to CaCl2. Washing of RFA promoted the release of insoluble chlorides, most of which were in the form of CaCl2.

  8. Stability constants of the Europium complexes with the chloride ions

    International Nuclear Information System (INIS)

    The stability constants of lanthanides complexes with chloride ions which were determined at the same ionic force but in different media, are significantly different. It does not exist a systematic study over these stability constants. The purpose of this work is to determine the stability constants of the europium complexes with chloride ions at 303 K, by the solvents extraction method. (Author)

  9. Monte Carlo calculation of chloride diffusion in concrete

    International Nuclear Information System (INIS)

    Coefficient of chloride diffusion is calculated by applying the Fick's second law of diffusion to a chloride concentration profile. Then from the signal strength for various chlorine gamma-ray energies was then calculated at the detector of the portable D-D neutron generator based PGNAA setup. (author)

  10. Phosphatase inhibitors activate normal and defective CFTR chloride channels.

    OpenAIRE

    Becq, F; Jensen, T J; Chang, X B; Savoia, A.; Rommens, J M; Tsui, L C; Buchwald, M; Riordan, J R; Hanrahan, J W

    1994-01-01

    The cystic fibrosis transmembrane conductance regulator (CFTR) chloride channel is regulated by phosphorylation and dephosphorylation at multiple sites. Although activation by protein kinases has been studied in some detail, the dephosphorylation step has received little attention. This report examines the mechanisms responsible for the dephosphorylation and spontaneous deactivation ("rundown") of CFTR chloride channels excised from transfected Chinese hamster ovary (CHO) and human airway epi...

  11. Contribution on creep polygonization study in crystals. Creep of single crystalline silver chloride and sodium chloride

    International Nuclear Information System (INIS)

    Subgrain formation and their influence on plastic behavior of materials has been studied in the case of single crystals of silver chloride and sodium chloride crept at high temperature (T > 0.5 Tmelting). It is shown that the creep rate ε is a function of the mean subgrain diameter d. For secondary creep ε ∝ dk with k = 2 for NaCl and AgCl. During secondary creep, the substructure changes continuously: sub-boundaries migrate and sub-grains rotate. We find that sub-boundaries migration accounts for 35 pc of the total strain and that subgrain misorientation θ increases linearly with strain ε: θ ∝ 0.14 ε. The stability of permanent creep seems related to the power that the substructure is able to dissipate. The possible subgrain formation mechanisms are examined. It is shown that subgrain formation is closely related to the geometrical conditions of deformation and to the heterogeneities of this later. (author)

  12. 甲醇氯化铵法反应催化剂的研究%Preparation and Performance of the Catalyst for the Synthesis of Methyl Chloride from Ammonia Chloride and Methanol

    Institute of Scientific and Technical Information of China (English)

    孙玉捧; 刘硕; 尚建楠; 魏士东; 刘玉敏; 胡永琪

    2011-01-01

    The catalysts for the synthesis of methyl chloride from ammonium chloride and methanol were prepared with equal-volume impregnation method, using γ-Al2O3 and the mixture of γ-Al2O3, kaolin and HZSM-5 molecular sieve as the carrier and cobalt as the active component. The performance of prepared catalysts was investigated in a bench-scale fixed bed reactor. The preparation method and operation conditions were optimized in order to obtain higher yield of methyl chloride. The experimental results showed that the yield of methyl chloride reached 74.2% by the catalyst with γ-Al2O3 as carrier under the conditions of the feedstock ratio of ammonium chloride to methanol 1.1:1, the reaction temperature 330-390 *C, space velocity 0.7 s-1 and 4% Co(NO3)2 as active component, and the conversion of methanol reached 90% and 75.3% yield of methyl chloride could be obtained by the catalyst with the mixture of γ-Al2O3, kaolin and HZSM-5 as carrier and 4% Co(NO3)2 as active component. It was indicated that the catalytic activities of the catalysts supported with γ-Al2O3 and the mixture supporter were similar. Dropping concentrated sulfuric acid during the preparation of the catalyst was not significant for the increase of catalyst activity.%利用等体积浸渍法,分别以γ-Al2O3以及γ-Al2O3、高岭土和HZSM-5分子筛三种物质的混合物为载体,通过负载钴活性组分制备了氯化铵与甲醇合成氯甲烷的催化剂,根据在固定床反应器中的实验结果对催化剂进行筛选并在此基础上对所筛选催化剂的制备工艺和操作条件进行优化.结果表明,在氯化铵和甲醇原料比1.1∶1,反应温度330~390℃,空速为0.7s-1的条件下,以γ-Al2O3为载体,负载4%的Co( NO3)2制备得到的催化剂,氯甲烷的收率达到74.2%;而以混合物为载体,负载4%的Co(NO3)2,甲醇的转化率为90%以上,氯甲烷收率最高可达到75.3%.混合型载体的催化剂与γ-Al2O3为载

  13. Root ABA Accumulation Enhances Rice Seedling Drought Tolerance under Ammonium Supply: Interaction with Aquaporins

    Science.gov (United States)

    Ding, Lei; Li, Yingrui; Wang, Ying; Gao, Limin; Wang, Min; Chaumont, François; Shen, Qirong; Guo, Shiwei

    2016-01-01

    In previous studies, we demonstrated that ammonium nutrition enhances the drought tolerance of rice seedlings compared to nitrate nutrition and contributes to a higher root water uptake ability. It remains unclear why rice seedlings maintain a higher water uptake ability when supplied with ammonium under drought stress. Here, we focused on the effects of nitrogen form and drought stress on root abscisic acid (ABA) concentration and aquaporin expression using hydroponics experiments and stimulating drought stress with 10% PEG6000. Drought stress decreased the leaf photosynthetic rate and stomatal conductivity and increased the leaf temperature of plants supplied with either ammonium or nitrate, but especially under nitrate supply. After 4 h of PEG treatment, the root protoplast water permeability and the expression of root PIP and TIP genes decreased in plants supplied with ammonium or nitrate. After 24 h of PEG treatment, the root hydraulic conductivity, the protoplast water permeability, and the expression of some aquaporin genes increased in plants supplied with ammonium compared to those under non-PEG treatment. Root ABA accumulation was induced by 24 h of PEG treatment, especially in plants supplied with ammonium. The addition of exogenous ABA decreased the expression of PIP and TIP genes under non-PEG treatment but increased the expression of some of them under PEG treatment. We concluded that drought stress induced a down-regulation of aquaporin expression, which appeared earlier than did root ABA accumulation. With continued drought stress, aquaporin expression and activity increased due to root ABA accumulation in plants supplied with ammonium.

  14. The ammonium content in the Malayer igneous and metamorphic rocks (Sanandaj-Sirjan Zone, Western Iran)

    Science.gov (United States)

    Ahadnejad, Vahid; Hirt, Ann Marie; Valizadeh, Mohammad-Vali; Bokani, Saeed Jabbari

    2011-04-01

    The ammonium (NH4+) contents of the Malayer area (Western Iran) have been determined by using the colorimetric method on 26 samples from igneous and metamorphic rocks. This is the first analysis of the ammonium contents of Iranian metamorphic and igneous rocks. The average ammonium content of metamorphic rocks decreases from low-grade to high-grade metamorphic rocks (in ppm): slate 580, phyllite 515, andalusite schist 242. In the case of igneous rocks, it decreases from felsic to mafic igneous types (in ppm): granites 39, monzonite 20, diorite 17, gabbro 10. Altered granitic rocks show enrichment in NH4+ (mean 61 ppm). The high concentration of ammonium in Malayer granites may indicate metasedimentary rocks as protoliths rather than meta-igneous rocks. These granitic rocks (S-types) have high K-bearing rock-forming minerals such as biotite, muscovite and K-feldspar which their potassium could substitute with ammonium. In addition, the high ammonium content of metasediments is probably due to inheritance of nitrogen from organic matter in the original sediments. The hydrothermally altered samples of granitic rocks show highly enrichment of ammonium suggesting external sources which intruded additional content by either interaction with metasedimentary country rocks or meteoritic solutions.

  15. Coastal water column ammonium and nitrite oxidation are decoupled in summer

    Science.gov (United States)

    Heiss, Elise M.; Fulweiler, Robinson W.

    2016-09-01

    Water column nitrification is a key process in the nitrogen cycle as it links reduced and oxidized forms of nitrogen and also provides the substrate (nitrate) needed for reactive nitrogen removal by denitrification. We measured potential water column ammonium and nitrite oxidation rates at four sites along an estuary to continental shelf gradient over two summers. In most cases, nitrite oxidation rates outpaced ammonium oxidation rates. Overall, ammonium and nitrite oxidation rates were higher outside of the estuary, and this trend was primarily driven by higher oxidation rates in deeper waters. Additionally, both ammonium and nitrite oxidation rates were impacted by different in situ variables. Ammonium oxidation rates throughout the water column as a whole were most positively correlated to depth and salinity and negatively correlated to dissolved oxygen and light. In contrast, nitrite oxidation rates throughout the water column were negatively correlated with light and pH. Multivariate regression analysis revealed that while both surface (20 m) ammonium oxidation rates were most strongly predicted by depth and light, surface rates were also regulated by salinity and deep rates by temperature. Surface (pH) alone, while salinity, [H+], temperature, and depth all played a role in predicting deep (>20 m) nitrite oxidation rates. These results support the growing body of evidence that ammonium oxidation and nitrite oxidation are not always coupled, should be measured separately, and are influenced by different environmental conditions.

  16. Monoclonal Antibodies to the Apical Chloride Channel in Necturus Gallbladder Inhibit the Chloride Conductance

    Science.gov (United States)

    Finn, Arthur L.; Tsai, Lih-Min; Falk, Ronald J.

    1989-10-01

    Monoclonal antibodies raised by injecting Necturus gallbladder cells into mice were tested for their ability to inhibit the apical chloride conductance induced by elevation of cellular cAMP. Five of these monoclonal antibodies bound to the apical cells, as shown by indirect immunofluorescence microscopy, and inhibited the chloride conductance; one antibody that bound only to subepithelial smooth muscle, by indirect immunofluorescence microscopy, showed no inhibition of chloride transport. The channel or a closely related molecule is present in the membrane whether or not the pathway is open, since, in addition to inhibiting the conductance of the open channel, the antibody also bound to the membrane in the resting state and prevented subsequent opening of the channel. The antibody was shown to recognize, by ELISA, epitopes from the Necturus gallbladder and small intestine. Finally, by Western blot analysis of Necturus gallbladder homogenates, the antibody was shown to recognize two protein bands of Mr 219,000 and Mr 69,000. This antibody should permit isolation and characterization of this important ion channel.

  17. Effects of High Ammonium Concentration on Growth and Nutrient Uptake of Lettuce Plants with Solution Culture

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    A nutrition solution experiment was conducted over two months to investigate the response of vegetable crops to high concentrations of ammonium, using lettuce (Lactuca sativa L. cv. Angustana Irish) as a test crop. Ammonium concentrations were designed in 5 levels, ranging from 12 mmol N L-1 to 22 mmol N L-1 and local tap water was used as water source. At the first culture stage (0-9 days), lettuce plants maintained normal growth while the lettuce roots were increasingly impaired. During the subsequent three stages the root structure was greatly damaged, and roots became brown or black through continuous supply of high concentration of ammonium. However, there was no obvious reduction of the aboveground biomass of the plants in the high ammonium treatments compared to those supplied with nitrate alone. In contrast to results obtained in another experiment from us with distilled water, the detrimental effect of high ammonium concentration on lettuce growth was greatly alleviated. Based on the results, it was postulated that the small amount of nitrate and the higher amount of bicarbonate existed in the tap water might mitigate the adverse effects of high ammonium N. The higher bicarbonate content in water and soil has usually been regarded as a major constraint factor limiting plant growth in calcareous soil areas. However, the reaction of bicarbonate to ammonium might produce positively interactive effect on reduction of both damages. The lettuce plants grown in ammonium solutions took up less P, K, Fe, Mn and Cu and more Ca than those grown in the nitrate nutrient solution. In conclusion, the results indicated that the N form imposed an obvious influence on absorption of cations and anions. Supplying ammonium-N stimulated transport of Ca, Mg and Mn to shoots of lettuce.

  18. Investigation of the wettability of ammonium nitrate prills

    Energy Technology Data Exchange (ETDEWEB)

    Kwok, Q.S.M.; Jones, D.E.G.; Kruus, P.

    2003-03-01

    The wetting characteristics of a variety of powders or porous materials can be determined through capillary penetration methods. Wettability of ammonium nitrate (AN) prills determines, in large part, the physical stability and detonation behaviour of ANFO (admixtures of AN prills with fuel oil). This study compared the wettabilities of a variety of AN prills with alkanes and fuel oil. Complementary characterization studies using scanning electron microscopy and thermogravimetry were also performed to justify the differences in wettability. Several factors affected wettability, including surface tension, viscosity, density, purity, polarity and polarizability of the liquid used. Surface composition, porosity, bulk density, particle size and moisture content of the AN samples were also contributing factors to wettability. The explosive-grade (porous) AN prill demonstrated a better wettability due the combined effects of these factors. Thermodesorption of octane from various AN prills was examined using high-resolution thermogravimetry. The adsorption capacity, porosity and specific surface area of 3 different AN prills were evaluated from the mass-loss curves to reflect the evaporation of the excess liquid and the thermodesorption of octane from the pores and the surface of the AN prills. The amount of octane desorbed in these steps was correlated with the volume in the pores and the quantity adsorbed on the surface. The porosity and surface area adsorption capacity of an AN prill was then estimated. 15 refs., 5 tabs., 10 figs.

  19. Rubidium, cesium and potassium sorption with magnesium-ammonium phosphate

    Energy Technology Data Exchange (ETDEWEB)

    Leont' eva, G.V.; Tomchuk, T.K.

    1986-01-01

    The possibility for using magnesium-ammonium phosphate as a sorbent to separate Cs/sup +/, Rb/sup +/ and K/sup +/ ions is estimated. The sorbent composition is close to NH/sub 4/MgPO/sub 4/x6H/sub 2/O. Sorption isotherms have been removed under static conditions at 293+-2 K separately for Cs/sup +/, Rb/sup +/ and K/sup +/ ions. Determination of the separation coefficients of these Cs/sup +/-Rb/sup +/ and Rb/sup +/-K/sup +/ ion pairs (the ratio of the ions separated in the initial solution varies from 1:1 to 1:10) during their sorption by NH/sub 4/MgPO/sub 4/x6H/sub 2/O phosphate gave the following estimation of the values measured: P/sub Cs-Rb/=(30-156) and P/sub Rb-K/=(7-15). Taking into account high values of the separation coefficients and good reversibility of the ion exchange process NH/sub 4//sup +/reversibleMe/sup +/(Me/sup +/=Cs/sup +/, Rb/sup +/, K/sup +/) by phosphate and with the struvite structure, it is possible to recommend this sorbent for practical application.

  20. Thermochemical Properties and Decomposition Kinetics of Ammonium Magnesium Phosphate Monohydrate

    Institute of Scientific and Technical Information of China (English)

    WU,Jian; YUAN,Ai-Qun; HUANG,Zai-Yin; TONG,Zhang-Fa; CHEN,Jie; LIANG,Rong-Lan

    2007-01-01

    Ammonium magnesium phosphate monohydrate NH4MgPO4·H2O was prepared via solid state reaction at room temperature and characterized by XRD, FT-IR and SEM. Thermochemical study was performed by an isoperibol solution calorimeter, non-isothermal measurement was used in a multivariate non-linear regression analysis to determine the kinetic reaction parameters. The results show that the molar enthalpy of reaction above is (28.795±0.182) kJ/mol (298.15 K), and the standard molar enthalpy of formation of the title complex is (-2185.43±13.80)kJ/mol (298.15 K). Kinetics analysis shows that the second decomposition of NH4MgPO4·H2O acts as a double-step reaction: an nth-order reaction (Fn) with n=4.28, E1=147.35 kJ/mol, A1=3.63×1013 s-1 is followed by a second-order reaction (F2) with E2=212.71 kJ/mol, A2= 1.82×1018 s-1.