WorldWideScience

Sample records for ambient community noise

  1. Ambient noise near the sea-route

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    Ambient noise data measured in an experiment conducted in shallow water near a sea-route were analyzed. It was observed that, at low frequency, the horizontal correlation has an obvious difference from that predicted by the classical ambient noise model. The theoretical analyses show that this phenomenon is caused by wind noise together with the discrete shipping noise nearby. An ambient noise model was proposed to include the effects caused by both the noise sources. Data measured at different times verify that the proposed model can be used to forecast the ambient noise field in shallow water near the sea-route.

  2. Ambient noise near the sea-route

    Institute of Scientific and Technical Information of China (English)

    HE Li; LI ZhengLin; PENG ZhaoHui

    2009-01-01

    Ambient noise data measured in an experiment conducted in shallow water near a sea-route were analyzed. It was observed that, at low frequency, the horizontal correlation has an obvious difference from that predicted by the classical ambient noise model. The theoretical analyses show that this phenomenon is caused by wind noise together with the discrete shipping noise nearby. An ambient noise model was proposed to include the effects caused by both the noise sources. Data measured at different times verify that the proposed model can be used to forecast the ambient noise field in shal-low water near the sea-route.

  3. Ambient Noise in an Urbanized Tidal Channel

    Science.gov (United States)

    Bassett, Christopher

    In coastal environments, when topographic and bathymetric constrictions are combined with large tidal amplitudes, strong currents (> 2 m/s) can occur. Because such environments are relatively rare and difficult to study, until recently, they have received little attention from the scientific community. However, in recent years, interest in developing tidal hydrokinetic power projects in these environments has motivated studies to improve this understanding. In order to support an analysis of the acoustic effects of tidal power generation, a multi-year study was conducted at a proposed project site in Puget Sound (WA) are analyzed at a site where peak currents exceeded 3.5 m/s. From these analyses, three noise sources are shown to dominate the observed variability in ambient noise between 0.02-30 kHz: anthropogenic noise from vessel traffic, sediment-generated noise during periods of strong currents, and flow-noise resulting from turbulence advected over the hydrophones. To assess the contribution of vessel traffic noise, one calendar year of Automatic Identification System (AIS) ship-traffic data was paired with hydrophone recordings. The study region included inland waters of the Salish Sea within a 20 km radius of the hydrophone deployment site in northern Admiralty Inlet. The variability in spectra and hourly, daily, and monthly ambient noise statistics for unweighted broadband and M-weighted sound pressure levels is driven largely by vessel traffic. Within the one-year study period, at least one AIS transmitting vessel is present in the study area 90% of the time and over 1,363 unique vessels are recorded. A noise budget for vessels equipped with AIS transponders identifies cargo ships, tugs, and passenger vessels as the largest contributors to noise levels. A simple model to predict received levels at the site based on an incoherent summation of noise from different vessel types yields a cumulative probability density function of broadband sound pressure

  4. Ocean Ambient Noise Measurement and Theory

    CERN Document Server

    Carey, William M

    2011-01-01

    This book develops the theory of ocean ambient noise mechanisms and measurements, and also describes general noise characteristics and computational methods.  It concisely summarizes the vast ambient noise literature using theory combined with key representative results.  The air-sea boundary interaction zone is described in terms of non-dimensional variables requisite for future experiments.  Noise field coherency, rare directional measurements, and unique basin scale computations and methods are presented.  The use of satellite measurements in these basin scale models is demonstrated.  Finally, this book provides a series of appendices giving in-depth mathematical treatments.  With its complete and careful discussions of both theory and experimental results, this book will be of the greatest interest to graduate students and active researchers working in fields related to ambient noise in the ocean.

  5. Towards Full-Waveform Ambient Noise Inversion

    Science.gov (United States)

    Sager, Korbinian; Ermert, Laura; Afanasiev, Michael; Boehm, Christian; Fichtner, Andreas

    2017-04-01

    Noise tomography usually works under the assumption that the inter-station ambient noise correlation is equal to a scaled version of the Green function between the two receivers. This assumption, however, is only met under specific conditions, e.g. wavefield diffusivity and equipartitioning, or the isotropic distribution of both mono- and dipolar uncorrelated noise sources. These assumptions are typically not satisfied in the Earth. This inconsistency inhibits the exploitation of the full waveform information contained in noise correlations in order to constrain Earth structure and noise generation. To overcome this limitation, we attempt to develop a method that consistently accounts for the distribution of noise sources, 3D heterogeneous Earth structure and the full seismic wave propagation physics. This is intended to improve the resolution of tomographic images, to refine noise source distribution, and thereby to contribute to a better understanding of both Earth structure and noise generation. First, we develop an inversion strategy based on a 2D finite-difference code using adjoint techniques. To enable a joint inversion for noise sources and Earth structure, we investigate the following aspects: i) the capability of different misfit functionals to image wave speed anomalies and source distribution and ii) possible source-structure trade-offs, especially to what extent unresolvable structure can be mapped into the inverted noise source distribution and vice versa. In anticipation of real-data applications, we present an extension of the open-source waveform modelling and inversion package Salvus (http://salvus.io). It allows us to compute correlation functions in 3D media with heterogeneous noise sources at the surface and the corresponding sensitivity kernels for the distribution of noise sources and Earth structure. By studying the effect of noise sources on correlation functions in 3D, we validate the aforementioned inversion strategy and prepare the

  6. Community response to noise.

    Science.gov (United States)

    Yano, Takashi; Gjestland, Truls; Lee, Soogab

    2012-01-01

    Activities from 2008 to 2011 by ICBEN community response to noise team were summarized. That is, individual community-based indexes such as community tolerance Level, Zuricher Fluglarm Index (ZFI) and Frankfurter Fluglarm Index (FFI/FNI) were newly proposed, differences in railway bonus between Europe and Asia were discussed by a Swedish survey, socio-acoustic surveys were reported from developing countries, and annoyance equivalents and dominant source models were proposed as the adequate combined noise model. Furthermore, not only negative, but also positive aspects of sound were discussed as soundscape studies. Finally, seven items were listed as future team activities.

  7. Community response to noise

    Directory of Open Access Journals (Sweden)

    Takashi Yano

    2012-01-01

    Full Text Available Activities from 2008 to 2011 by ICBEN community response to noise team were summarized. That is, individual community-based indexes such as community tolerance Level, Zuricher Fluglarm Index (ZFI and Frankfurter Fluglarm Index (FFI/FNI were newly proposed, differences in railway bonus between Europe and Asia were discussed by a Swedish survey, socio-acoustic surveys were reported from developing countries, and annoyance equivalents and dominant source models were proposed as the adequate combined noise model. Furthermore, not only negative, but also positive aspects of sound were discussed as soundscape studies. Finally, seven items were listed as future team activities.

  8. Characterizing global infrasonic ocean ambient noise

    Science.gov (United States)

    Le Pichon, Alexis; Stutzman, Eleonore; Arduin, Fabrice; Sylvain, Leon

    2017-04-01

    The ability of the International Monitoring System (IMS) global infrasound network to detect atmospheric explosions and events of interest strongly depends on station specific ambient noise which includes both incoherent wind noise and real coherent infrasonic waves. To characterize the coherent ambient noise, a broadband array processing was performed on 10 years of continuous recordings at IMS stations. Multi-year comparisons between the observed and modeled directional microbarom amplitude variations at several IMS stations using two-dimensional wave energy spectrum ocean wave products are performed to build of a reference database of infrasound oceanic sources. Microseisms are attributed the same source processes as microbaroms, involving the interaction of standing ocean waves. To further evaluate oceanic wave action models, the infrasound analysis will be supplemented with several other approaches including microseisms collected at seismic instrumentation (single stations and arrays). The expected benefits of such studies concern the use of multi-year complementary data to finely characterize coupling mechanisms at the ocean-atmosphere interface. In return, a better knowledge of the source of the ambient ocean noise opens new perspectives by providing additional integrated constraints on the dynamics of the middle atmosphere and its disturbances where data coverage is sparse.

  9. Ocean Remote Sensing Using Ambient Noise

    Science.gov (United States)

    2015-09-30

    allows contributions from modal pulses corresponding to different mode numbers to be isolated, even when there is significant overlap in time between...approximation to the transient Green’s function G(xA|xB, t) between locations xA and xB is estimated by cross -correlating records of ambient noise...at 100 m depth are described by Brown et al. (2014). Stable cross -correlation functions are shown to require coherent stacking over a period of

  10. Deep Water Ambient Noise and Mode Processing

    Science.gov (United States)

    2014-09-30

    to this award. The Code 321 project is titled Random Matrix Theory ( RMT ) for Adaptive Beamforming (N00014-12-1-0048). The RMT project is using some...of the Philippine Sea data for testing adaptive beamformers. The RMT analysis focuses on sonar signal processing issues, rather than propagation...ambient noise, or tomography. The project described in this report may benefit from the results of the RMT project, but there is no direct overlap in

  11. Horizontal Correlation of Ambient Noise near a Sea Route

    Institute of Scientific and Technical Information of China (English)

    HE Li; LI Zheng-Lin; ZHANG Ren-He; PENG Zhao-Hui

    2008-01-01

    Ambient noise data measured in an experiment conducted near the sea route are analysed.It is found that at low frequency,the measured horizontal correlation coeffients at different separations oscillate much larger than that predicted by the classical ambient noise model.The theoretical analyses show that the observed phenomenon is mainly caused by windy noise together with the discrete shipping noise nearby.An ambient noise model is proposed to include the effects caused by both the noise sources and can be used to forecast the ambient noise field neara sea route.

  12. Radial anisotropy ambient noise tomography of volcanoes

    Science.gov (United States)

    Mordret, Aurélien; Rivet, Diane; Shapiro, Nikolai; Jaxybulatov, Kairly; Landès, Matthieu; Koulakov, Ivan; Sens-Schönfelder, Christoph

    2016-04-01

    The use of ambient seismic noise allows us to perform surface-wave tomography of targets which could hardly be imaged by other means. The frequencies involved (~ 0.5 - 20 s), somewhere in between active seismic and regular teleseismic frequency band, make possible the high resolution imaging of intermediate-size targets like volcanic edifices. Moreover, the joint inversion of Rayleigh and Love waves dispersion curves extracted from noise correlations allows us to invert for crustal radial anisotropy. We present here the two first studies of radial anisotropy on volcanoes by showing results from Lake Toba Caldera, a super-volcano in Indonesia, and from Piton de la Fournaise volcano, a hot-spot effusive volcano on the Réunion Island (Indian Ocean). We will see how radial anisotropy can be used to infer the main fabric within a magmatic system and, consequently, its dominant type of intrusion.

  13. New Codes for Ambient Seismic Noise Analysis

    Science.gov (United States)

    Duret, F.; Mooney, W. D.; Detweiler, S.

    2007-12-01

    In order to determine a velocity model of the crust, scientists generally use earthquakes recorded by seismic stations. However earthquakes do not occur continuously and most are too weak to be useful. When no event is recorded, a waveform is generally considered to be noise. This noise, however, is not useless and carries a wealth of information. Thus, ambient seismic noise analysis is an inverse method of investigating the Earth's interior. Until recently, this technique was quite difficult to apply, as it requires significant computing capacities. In early 2007, however, a team led by Gregory Benson and Mike Ritzwoller from UC Boulder published a paper describing a new method for extracting group and phase velocities from those waveforms. The analysis consisting of recovering Green functions between a pair of stations, is composed of four steps: 1) single station data preparation, 2) cross-correlation and stacking, 3) quality control and data selection and 4) dispersion measurements. At the USGS, we developed a set of ready-to-use computing codes for analyzing waveforms to run the ambient noise analysis of Benson et al. (2007). Our main contribution to the analysis technique was to fully automate the process. The computation codes were written in Fortran 90 and the automation scripts were written in Perl. Furthermore, some operations were run with SAC. Our choices of programming language offer an opportunity to adapt our codes to the major platforms. The codes were developed under Linux but are meant to be adapted to Mac OS X and Windows platforms. The codes have been tested on Southern California data and our results compare nicely with those from the UC Boulder team. Next, we plan to apply our codes to Indonesian data, so that we might take advantage of newly upgraded seismic stations in that region.

  14. Ocean Ambient Noise Studies for Shallow and Deep Water Environments

    Science.gov (United States)

    2014-09-30

    1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Ocean Ambient Noise Studies for Shallow and Deep Water...Siderius.php LONG-TERM GOALS The objective of this research is to study the ocean ambient noise field by means of new physics-based processing... ambient -noise field using a vertical line array has been developed by Harrison and Simons [Harrison, 2002]. The advantages of passive bottom-survey

  15. Ambient noise spectral properties in the north area of Xisha

    Institute of Scientific and Technical Information of China (English)

    DA Lianglong; WANG Chao; HAN Mei; ZHANG Lin

    2014-01-01

    Ambient noise is very important in the prediction system of a sonar performance, because it determines the detection ranges always in a passive sonar and usually in an active sonar. In the uncertainty issue for the so-nar performance, it is necessary to know this factor’s statistical characteristics that are only obtained by data processing from the underwater ambient noise measurements. Broad-band ambient noise signals from 16 hydrophones were amplified and recorded for 2 min every 1 h. The results show that the ambient noise is essentially depth independent. The cross correlation of the ambient noise levels (1, 6 and 12 h average) with a wind speed is presented. It was found that the correlation is excellent on the upper frequency band and the noise levels correlate better with high wind speed than with low wind speed.

  16. Cross-correlations of ambient noise recorded by accelerometers.

    Science.gov (United States)

    Rábade García, S. E.; Ramirez-Guzman, L.

    2014-12-01

    We investigate the ambient noise cross-correlations obtained by using properly corrected accelerometric recordings, and determine velocity structure in central Mexico based on a dispersion analysis. The data used comprise ten months of continuous recordings - from April 2013 to January 2014 - of ambient seismic noise at stations operated by the National Seismological Service of Mexico and the Engineering Strong Ground Motion Network of the National Autonomous University of Mexico (UNAM). The vertical component of ambient noise was base-line corrected, filtered, and properly integrated before extracting Green's functions (GF), which were compared successfully against GF obtained using recordings from broadband velocity sensors. In order to obtain dispersion curves, we estimated group and phase velocities applying the FTAN analysis technique and obtained s-wave velocity profiles at selected regions. We conclude and highlight that the use of widely deployed accelerographs to conduct regional studies using ambient noise tomography is feasible

  17. Geoacoustic inversion of ambient noise: A simple method.

    NARCIS (Netherlands)

    Harrison, C.H.; Simons, D.G.

    2002-01-01

    The vertical directionality of ambient noise is strongly influenced by seabed reflections. Therefore, potentially, geoacoustic parameters can be inferred by inversion of the noise. In this approach, using vertical array measurements, the reflection loss is found directly by comparing the upward- wit

  18. Ambient noise levels and detection threshold in Norway

    Science.gov (United States)

    Demuth, Andrea; Ottemöller, Lars; Keers, Henk

    2016-07-01

    Ambient seismic noise is caused by a number of sources in specific frequency bands. The quantification of ambient noise makes it possible to evaluate station and network performance. We evaluate noise levels in Norway from the 2013 data set of the Norwegian National Seismic Network as well as two temporary deployments. Apart from the station performance, we studied the geographical and temporal variations, and developed a local noise model for Norway. The microseism peaks related to the ocean are significant in Norway. We, therefore, investigated the relationship between oceanic weather conditions and noise levels. We find a correlation of low-frequency noise (0.125-0.25 Hz) with wave heights up to 900 km offshore. High (2-10 Hz) and intermediate (0.5-5 Hz) frequency noise correlates only up to 450 km offshore with wave heights. From a geographic perspective, stations in southern Norway show lower noise levels for low frequencies due to a larger distance to the dominant noise sources in the North Atlantic. Finally, we studied the influence of high-frequency noise levels on earthquake detectability and found that a noise level increase of 10 dB decreases the detectability by 0.5 magnitude units. This method provides a practical way to consider noise variations in detection maps.

  19. Accurate Ambient Noise Assessment Using Smartphones

    Science.gov (United States)

    Zamora, Willian; Calafate, Carlos T.; Cano, Juan-Carlos; Manzoni, Pietro

    2017-01-01

    Nowadays, smartphones have become ubiquitous and one of the main communication resources for human beings. Their widespread adoption was due to the huge technological progress and to the development of multiple useful applications. Their characteristics have also experienced a substantial improvement as they now integrate multiple sensors able to convert the smartphone into a flexible and multi-purpose sensing unit. The combined use of multiple smartphones endowed with several types of sensors gives the possibility to monitor a certain area with fine spatial and temporal granularity, a procedure typically known as crowdsensing. In this paper, we propose using smartphones as environmental noise-sensing units. For this purpose, we focus our study on the sound capture and processing procedure, analyzing the impact of different noise calculation algorithms, as well as in determining their accuracy when compared to a professional noise measurement unit. We analyze different candidate algorithms using different types of smartphones, and we study the most adequate time period and sampling strategy to optimize the data-gathering process. In addition, we perform an experimental study comparing our approach with the results obtained using a professional device. Experimental results show that, if the smartphone application is well tuned, it is possible to measure noise levels with a accuracy degree comparable to professional devices for the entire dynamic range typically supported by microphones embedded in smartphones, i.e., 35–95 dB. PMID:28430126

  20. Transdimensional Bayesian seismic ambient noise tomography across SE Tibet

    Science.gov (United States)

    Zheng, DingChang; Saygin, Erdinc; Cummins, Phil; Ge, Zengxi; Min, Zhaoxu; Cipta, Athanasius; Yang, Runhai

    2017-02-01

    We analyze seismic ambient noise data recorded at a set of permanent and temporary stations across southeastern Tibet to image crustal structure. High-resolution phase velocity maps are presented based on Transdimensional Bayesian seismic ambient noise tomography. Seismic images exhibit more apparent horizontal heterogeneities and show more detailed information compared to previous studies based on traditional ambient noise tomography. As noted from the phase velocity image at 25 s, the rigid high velocity anomalies beneath the Sichuan Basin and the South China Fold System act as a blockage to crustal material expansion, and the distribution of velocity anomalies contributes to the interpretation of a surface clockwise rotation pattern. Our results imply a more complex distributed low-velocity zone rather than two isolated channels beneath SE Tibet.

  1. Surface Wave Attenuation in the Tibetan Plateau from Ambient Noise

    Science.gov (United States)

    2015-08-31

    points that are kept and points that are windowed out. 2) Select a window length for ATF. 3) Calculus RMS amplitude of ALL traces for that time window...and site factors from ambient noise, C. R. Geoscience, 343, pp. 615-622, doi :10.1016/j.crte.2011.07.001, 2011. Weaver, R.L., On the retrieval of...attenuation and site amplifications from ambient noise on linear arrays: further numerical simulations, Geophys. J. Int., 193, 3, pp. 1644-1657, DOI

  2. Masking of Wind Turbine Noise: Influence of wind turbulence on ambient noise fluctuations

    Energy Technology Data Exchange (ETDEWEB)

    Fegeant, Olivier

    2002-07-01

    In the issue of noise annoyance generated by wind turbines, masking by ambient noise is of great importance. At wind turbine sites, the main source of ambient noise arises from the wind blowing on the vegetation. However, natural wind can barely be described as a steady flow and 'lulls' and 'gusts' are words used to describe its unsteady component. This latter, also called wind turbulence, may affect the masking effect, as the wind turbine may become audible during short laps of time of low wind speed, that is of low ambient noise. The aim of the present report is to study the influence of wind turbulence on ambient noise fluctuations. It is shown that these latter are governed not only by the turbulence intensity, but also by its temporal and spatial structure. This report provides some elements of atmospheric turbulence as well as techniques for the simulation of turbulent wind fields. Simulation results are given that illustrate how the standard deviation of the vegetation noise can vary as function of the canopy size and turbulence spatial patterns. Finally, ambient noise fluctuations and their statistical descriptions are also discussed, based on both theoretical considerations and empirical results.

  3. Shear velocity of the Rotokawa geothermal field using ambient noise

    Science.gov (United States)

    Civilini, F.; Savage, M. K.; Townend, J.

    2014-12-01

    Ambient noise correlation is an increasingly popular seismological technique that uses the ambient seismic noise recorded at two stations to construct an empirical Green's function. Applications of this technique include determining shear velocity structure and attenuation. An advantage of ambient noise is that it does not rely on external sources of seismic energy such as local or teleseismic earthquakes. This method has been used in the geothermal industry to determine the depths at which magmatic processes occur, to distinguish between production and non-production areas, and to observe seismic velocity perturbations associated with fluid extraction. We will present a velocity model for the Rotokawa geothermal field near Taupo, New Zealand, produced from ambient noise cross correlations. Production at Rotokawa is based on the "Rotokawa A" combined cycle power station established in 1997 and the "Nga Awa Purua" triple flash power plant established in 2010. Rotokawa Joint Venture, a partnership between Mighty River Power and Tauhara North No. 2 Trust currently operates 174 MW of generation at Rotokawa. An array of short period seismometers was installed in 2008 and occupies an area of roughly 5 square kilometers around the site. Although both cultural and natural noise sources are recorded at the stations, the instrument separation distance provides a unique challenge for analyzing cross correlations produced by both signal types. The inter-station spacing is on the order of a few kilometers, so waves from cultural sources generally are not coherent from one station to the other, while the wavelength produced by natural noise is greater than the station separation. Velocity models produced from these two source types will be compared to known geological models of the site. Depending on the amount of data needed to adequately construct cross-correlations, a time-dependent model of velocity will be established and compared with geothermal production processes.

  4. When ambient noise impairs parent-offspring communication.

    Science.gov (United States)

    Lucass, Carsten; Eens, Marcel; Müller, Wendt

    2016-05-01

    Ambient noise has increased in extent, duration and intensity with significant implications for species' lives. Birds especially, because they heavily rely on vocal communication, are highly sensitive towards noise pollution. Noise can impair the quality of a territory or hamper the transmission of vocal signals such as song. The latter has significant fitness consequences as it may erode partner preferences in the context of mate choice. Additional fitness costs may arise if noise masks communication between soliciting offspring and providing parents during the period of parental care. Here, we experimentally manipulated the acoustic environment of blue tit (Cyanistes caeruleus) families within their nest boxes with playbacks of previously recorded highway noise and investigated the consequences on parent-offspring communication. We hypothesized that noise interferes with the acoustic cues of parental arrival and vocal components of offspring begging. As such we expected an increase in the frequency of missed detections, when nestlings fail to respond to the returning parent, and a decrease in parental provisioning rates. Parents significantly reduced their rate of provisioning in noisy conditions compared to a control treatment. This reduction is likely to be the consequence of a parental misinterpretation of the offspring hunger level, as we found that nestlings fail to respond to the returning parent more frequently in the presence of noise. Noise also potentially masks vocal begging components, again contributing to parental underestimation of offspring requirements. Either way, it appears that noise impaired parent-offspring communication is likely to reduce reproductive success.

  5. A high-resolution ambient seismic noise model for Europe

    Science.gov (United States)

    Kraft, Toni

    2014-05-01

    In the past several years, geological energy technologies receive growing attention and have been initiated in or close to urban areas. Some of these technologies involve injecting fluids into the subsurface (e.g., oil and gas development, waste disposal, and geothermal energy development) and have been found or suspected to cause small to moderate sized earthquakes. These earthquakes, which may have gone unnoticed in the past when they occurred in remote sparsely populated areas, are now posing a considerable risk for the public acceptance of these technologies in urban areas. The permanent termination of the EGS project in Basel, Switzerland after a number of induced ML~3 (minor) earthquakes in 2006 is one prominent example. It is therefore essential to the future development and success of these geological energy technologies to develop strategies for managing induced seismicity and keeping the size of induced earthquake at a level that is acceptable to all stakeholders. Most guidelines and recommendations on induced seismicity published since the 1970ies conclude that an indispensable component of such a strategy is the establishment of seismic monitoring in an early stage of a project. This is because an appropriate seismic monitoring is the only way to detect and locate induced microearthquakes with sufficient certainty to develop an understanding of the seismic and geomechanical response of the reservoir to the geotechnical operation. In addition, seismic monitoring lays the foundation for the establishment of advanced traffic light systems and is therefore an important confidence building measure towards the local population and authorities. Due to this development an increasing number of seismic monitoring networks are being installed in densely populated areas with strongly heterogeneous, and unfavorable ambient noise conditions. This poses a major challenge on the network design process, which aims to find the sensor geometry that optimizes the

  6. Depth Profiling Ambient Noise in the Deep Ocean

    Science.gov (United States)

    Barclay, David Readshaw

    Deep Sound is an un-tethered, free-falling acoustic platform designed to profile the ambient noise field in the ocean from the surface to a pre-programmed depth, at which point a ballast weight is dropped and the instrument returns to the surface under its own buoyancy. Three iterations of the instrument, Mk I, II and III, have been designed, built and tested, the first two rated to descend to 9 km and the third to a full ocean depth of 11 km. During a deployment of the instrument, vertically and horizontally spaced hydrophones continuously record the ambient noise pressure time series over a large bandwidth (5 Hz -- 40 kHz), returning the power spectral density, vertical and horizontal coherence as a function of depth. Deep Sound Mk I and Mk II have been deployed down to 9 km depth in the Mariana Trench and Mk I has descended three times to 5 km, 5.5 km and 6 km in the Philippine Sea. The data reported here examines the depth-dependence of the power spectrum, vertical coherence and directionality of rain and wind noise in the Philippine Sea. Acoustic estimates of rainfall rates and wind speeds are made from the surface to 5.5 km and 6 km respectively and compared to surface meteorological measurements. The depth-dependence of the accuracy of these estimates is relatively small and found to improve with depth. A coherence fitting procedure is employed to return ambient noise directionality and provide information on the spatial variability of an overhead rainstorm. With moderate 7-10 m/s winds, downward propagating noise from directly overhead dominates the noise field directionality from the surface to 6 km. Using the wind generated surface noise and the depth dependence of the spectral slope over the band 1 -- 10 kHz, the frequency dependence of the absorption due to sea water is estimated and used to infer a mean water column value of pH.

  7. Robust seismic velocity change estimation using ambient noise recordings

    Science.gov (United States)

    Daskalakis, E.; Evangelidis, C. P.; Garnier, J.; Melis, N. S.; Papanicolaou, G.; Tsogka, C.

    2016-06-01

    We consider the problem of seismic velocity change estimation using ambient noise recordings. Motivated by Zhan et al., we study how the velocity change estimation is affected by seasonal fluctuations in the noise sources. More precisely, we consider a numerical model and introduce spatio-temporal seasonal fluctuations in the noise sources. We show that indeed, as pointed out by Zhan et al., the stretching method is affected by these fluctuations and produces misleading apparent velocity variations which reduce dramatically the signal to noise ratio of the method. We also show that these apparent velocity variations can be eliminated by an adequate normalization of the cross-correlation functions. Theoretically we expect our approach to work as long as the seasonal fluctuations in the noise sources are uniform, an assumption which holds for closely located seismic stations. We illustrate with numerical simulations in homogeneous and scattering media that the proposed normalization significantly improves the accuracy of the velocity change estimation. Similar behaviour is also observed with real data recorded in the Aegean volcanic arc. We study in particular the volcano of Santorini during the seismic unrest of 2011-2012 and observe a decrease in the velocity of seismic waves which is correlated with GPS measured elevation.

  8. Ambient Noise Tomography of central Java, with Transdimensional Bayesian Inversion

    Science.gov (United States)

    Zulhan, Zulfakriza; Saygin, Erdinc; Cummins, Phil; Widiyantoro, Sri; Nugraha, Andri Dian; Luehr, Birger-G.; Bodin, Thomas

    2014-05-01

    Delineating the crustal structure of central Java is crucial for understanding its complex tectonic setting. However, seismic imaging of the strong heterogeneity typical of such a tectonically active region can be challenging, particularly in the upper crust where velocity contrasts are strongest and steep body wave ray-paths provide poor resolution. We have applied ambient noise cross correlation of pair stations in central Java, Indonesia by using the MERapi Amphibious EXperiment (MERAMEX) dataset. The data were collected between May to October 2004. We used 120 of 134 temporary seismic stations for about 150 days of observation, which covered central Java. More than 5000 Rayleigh wave Green's function were extracted by cross-correlating the noise simultaneously recorded at available station pairs. We applied a fully nonlinear 2D Bayesian inversion technique to the retrieved travel times. Features in the derived tomographic images correlate well with previous studies, and some shallow structures that were not evident in previous studies are clearly imaged with Ambient Noise Tomography. The Kendeng Basin and several active volcanoes appear with very low group velocities, and anomalies with relatively high velocities can be interpreted in terms of crustal sutures and/or surface geological features.

  9. Intrinsic Noise Level of Noise Cross-Correlation Functions and its Implication to Source Population of Ambient noises

    Science.gov (United States)

    Chen, Ying-Nien; Gung, Yuancheng; Chiao, Ling-Yun; Rhie, Junkee

    2017-01-01

    SUMMARYWe present a quantitative procedure to evaluate the intrinsic noise level (INL) of the noise cross-correlation function (NCF). The method is applied to realistic NCFs derived from the continuous data recorded by the seismic arrays in Taiwan and Korea. The obtained temporal evolution of NCF noise level follows fairly the prediction of the theoretical formulation, confirming the feasibility of the method. We then apply the obtained INL to the assessment of data quality and the source characteristics of ambient noise. We show that the INL-based signal-to-noise ratio provides an exact measure for the true noise level within the NCF and better resolving power for the NCF quality, and such measurement can be implemented to any time windows of the NCFs to evaluate the quality of overtones or coda waves. Moreover, since NCF amplitudes are influenced by both the population and excitation strengths of noises, while INL is primarily sensitive to the overall source population, with information from both measurements, we may better constrain the source characteristics of seismic ambient noises.

  10. Crustal structure of Australia from ambient seismic noise tomography

    Science.gov (United States)

    Saygin, Erdinc; Kennett, B. L. N.

    2012-01-01

    Surface wave tomography for Australian crustal structure has been carried out using group velocity measurements in the period range 1-32 s extracted from stacked correlations of ambient noise between station pairs. Both Rayleigh wave and Love wave group velocity maps are constructed for each period using the vertical and transverse component of the Green's function estimates from the ambient noise. The full suite of portable broadband deployments and permanent stations on the continent have been used with over 250 stations in all and up to 7500 paths. The permanent stations provide a useful link between the various shorter-term portable deployments. At each period the group velocity maps are constructed with a fully nonlinear tomographic inversion exploiting a subspace technique and the Fast Marching Method for wavefront tracking. For Rayleigh waves the continental coverage is good enough to allow the construction of a 3D shear wavespeed model in a two stage approach. Local group dispersion information is collated for a distribution of points across the continent and inverted for a 1D SV wavespeed profile using a Neighbourhood Algorithm method. The resulting set of 1D models are then interpolated to produce the final 3D wavespeed model. The group velocity maps show the strong influence of thick sediments at shorter periods, and distinct fast zones associated with cratonic regions. Below the sediments the 3D shear wavespeed model displays significant heterogeneity with only moderate correlation with surface tectonic features. For example, there is no evident expression of the Tasman Line marking the eastern edge of Precambrian outcrop. The large number of available inter-station paths extracted from the ambient noise analysis provide detailed shear wavespeed information for crustal structure across the Australian continent for the first time, including regions where there was no prior sampling because of difficult logistics.

  11. Noise Model Analysis and Estimation of Effect due to Wind Driven Ambient Noise in Shallow Water

    Directory of Open Access Journals (Sweden)

    S. Sakthivel Murugan

    2011-01-01

    Full Text Available Signal transmission in ocean using water as a channel is a challenging process due to attenuation, spreading, reverberation, absorption, and so forth, apart from the contribution of acoustic signals due to ambient noises. Ambient noises in sea are of two types: manmade (shipping, aircraft over the sea, motor on boat, etc. and natural (rain, wind, seismic, etc., apart from marine mammals and phytoplanktons. Since wind exists in all places and at all time: its effect plays a major role. Hence, in this paper, we concentrate on estimating the effects of wind. Seven sets of data with various wind speeds ranging from 2.11 m/s to 6.57 m/s were used. The analysis is performed for frequencies ranging from 100 Hz to 8 kHz. It is found that a linear relationship between noise spectrum and wind speed exists for the entire frequency range. Further, we developed a noise model for analyzing the noise level. The results of the empirical data are found to fit with results obtained with the aid of noise model.

  12. Community response to tramway noise

    NARCIS (Netherlands)

    Miedema, H.M.E.; Berg, R. van den

    1988-01-01

    A study concerning tramway noise is described and results are presented. The study consisted of a social survey and a noise measurement program. It appeared that tramway noise does not contribute to the annoyance of the total noise if tramway annoyance is substantially below road traffic annoyance

  13. Community response to tramway noise

    NARCIS (Netherlands)

    Miedema, H.M.E.; Berg, R. van den

    1988-01-01

    A study concerning tramway noise is described and results are presented. The study consisted of a social survey and a noise measurement program. It appeared that tramway noise does not contribute to the annoyance of the total noise if tramway annoyance is substantially below road traffic annoyance (

  14. Crustal radial anisotropy beneath Cameroon from ambient noise tomography

    Science.gov (United States)

    Ojo, Adebayo Oluwaseun; Ni, Sidao; Li, Zhiwei

    2017-01-01

    To increase the understanding of crustal deformation and crustal flow patterns due to tectonic processes in Cameroon, we study the lateral variability of the crustal isotropic velocity and radial anisotropy estimated using Ambient Noise Tomography (ANT). Rayleigh and Love wave Noise Correlation Functions (NCFs) were retrieved from the cross-correlation of seismic ambient noise data recorded in Cameroon, and phase velocities at periods of 8 to 30 s were measured to perform surface wave tomography. Joint inversion of Rayleigh and Love wave data for isotropic velocity models could not fit the observed dispersions simultaneously. We attribute the Love-Rayleigh discrepancy to the presence of radial anisotropy in the crust and estimated its magnitude. Our 3-D radial anisotropic model reveals the spatial variation of strong to weak positive (Vsh > Vsv) and negative (Vsv > Vsh) radial anisotropy in the crust. We observe negative radial anisotropy in the upper crust that is associated mainly with the location of a previously reported mantle plume. The anisotropy could be attributed to the vertical alignment of fossil microcracks or metamorphic foliations due to the upwelling of plume material. A strong positive radial anisotropy is centered at the location of an inferred boundary between the Congo Craton and the Oubanguides Belt that might be related to the preferred orientation of crustal anisotropic minerals associated with shearing in this fault zone. The middle crust is characterized by a widespread negative radial anisotropy that is likely caused by the flow-induced alignment of anisotropic minerals that crystallized during magma intrusion. The magnitude of the radial anisotropy varies systematically from predominantly negative in the middle crust to positive in the lower crust. The imaged patterns of the isotropic velocity and radial anisotropy are consistent with previous studies and agree with regional tectonics.

  15. Ambient Noise Analysis from Selected CTBTO (Comprehensive Test Ban Treaty Organization) Sites

    Science.gov (United States)

    2015-02-11

    3. DATES COVERED (From - To) 1 Jan 2011 -30 Sept 2014 4. TITLE AND SUBTITLE Ambient Noise Analysis from Selected CTBTO Hydroacoustic Sites 5a...of Great Britain & Northern Ireland and the United States. The data is a continuous stream of ambient noise, from each sensor—the interest is in long...term ambient noise recordings; study of specific source functions and their temporal behavior. The frequency range of the system is limited to

  16. Single-station monitoring of volcanoes using seismic ambient noise

    Science.gov (United States)

    De Plaen, Raphael S. M.; Lecocq, Thomas; Caudron, Corentin; Ferrazzini, Valérie; Francis, Olivier

    2016-08-01

    Seismic ambient noise cross correlation is increasingly used to monitor volcanic activity. However, this method is usually limited to volcanoes equipped with large and dense networks of broadband stations. The single-station approach may provide a powerful and reliable alternative to the classical "cross-station" approach when measuring variation of seismic velocities. We implemented it on the Piton de la Fournaise in Reunion Island, a very active volcano with a remarkable multidisciplinary continuous monitoring. Over the past decade, this volcano has been increasingly studied using the traditional cross-correlation technique and therefore represents a unique laboratory to validate our approach. Our results, tested on stations located up to 3.5 km from the eruptive site, performed as well as the classical approach to detect the volcanic eruption in the 1-2 Hz frequency band. This opens new perspectives to successfully forecast volcanic activity at volcanoes equipped with a single three-component seismometer.

  17. Ambient seismic noise tomography of the Colima Volcano Complex

    Science.gov (United States)

    Escudero, Christian R.; Bandy, William L.

    2017-02-01

    The Colima Volcanic Complex (CVC) located in the western sector of the Trans-Mexican Volcanic Belt contains the most active Mexican volcano, Volcan Colima. The CVC is located within the Colima Rift, a regional north south striking extensional structure. We used ambient seismic noise recorded by stations deployed in western Mexico during the Mapping the Rivera Subduction Zone (MARS) and the Colima Volcano Deep Seismic Experiment (CODEX). We computed the cross-correlations of the vertical component of continuous records of ambient noise data to extract empirical Greens functions. These functions provide detailed images of Rayleigh wave group velocity for different periods. Using the arrival travel time of these waves for a given period, estimates can be obtained of the lateral variations in velocity for a given period using 2D tomography. The study aims to better understand the geometry and the seismic surface wave velocity structure of the CVC and relate it to the volcanoes' structure and the geologic setting of the region. Source of low velocity anomaly over CVC is distributed fairly continuously with depth in the subsurface, which indicates magma rising along fractures. The progressive increasing toward the south in the size of low velocity anomalies indicates migration towards the south of the melting that correlates with the trend of the stratovolcanoes that form the CVC. The zone of magma generation presently fully developed under Volcan de Fuego might be starting to shift towards south to the area NW of Armería where a new void in the tear zone may be starting to form.

  18. A Complexity-Based Approach for the Detection of Weak Signals in Ocean Ambient Noise

    Directory of Open Access Journals (Sweden)

    Shashidhar Siddagangaiah

    2016-03-01

    Full Text Available There are numerous studies showing that there is a constant increase in the ocean ambient noise level and the ever-growing demand for developing algorithms for detecting weak signals in ambient noise. In this study, we utilize dynamical and statistical complexity to detect the presence of weak ship noise embedded in ambient noise. The ambient noise and ship noise were recorded in the South China Sea. The multiscale entropy (MSE method and the complexity-entropy causality plane (C-H plane were used to quantify the dynamical and statistical complexity of the measured time series, respectively. We generated signals with varying signal-to-noise ratio (SNR by varying the amplification of a ship signal. The simulation results indicate that the complexity is sensitive to change in the information in the ambient noise and the change in SNR, a finding that enables the detection of weak ship signals in strong background ambient noise. The simulation results also illustrate that complexity is better than the traditional spectrogram method, particularly effective for detecting low SNR signals in ambient noise. In addition, complexity-based MSE and C-H plane methods are simple, robust and do not assume any underlying dynamics in time series. Hence, complexity should be used in practical situations.

  19. Regional Ambient Noise Tomography in the Eastern Alps of Europe

    Science.gov (United States)

    Behm, Michael; Nakata, Nori; Bokelmann, Götz

    2016-08-01

    We present results from ambient noise tomography applied to temporary seismological stations in the easternmost part of the Alps and their transition to the adjacent tectonic provinces (Vienna Basin, Bohemian Massif, Southern Alps, Dinarides). By turning each station into a virtual source, we recover surface waves in the frequency range between 0.1 and 0.6 Hz, which are sensitive to depths of approximately 2-15 km. The utilization of horizontal components allows for the analysis of both Rayleigh and Love waves with comparable signal-to-noise ratio. Measured group wave dispersion curves between stations are mapped to local cells by means of a simultaneous inverse reconstruction technique. The spatial reconstruction for Love-wave velocities fails in the central part of the investigated area, and we speculate that a heterogeneous noise source distribution is the cause for the failure. Otherwise, the obtained group velocity maps correlate well with surface geology. Inversion of Rayleigh-wave velocities for shear-wave velocities along a vertical N-S section stretching from the Bohemian Massif through the Central Alps to the Southern Alps and Dinarides reveals a mid-crustal low-velocity anomaly at the contact between the Bohemian Massif and the Alps, which shows a spatial correlation with the P-wave velocity structure and the low-frequency component of the magnetic anomaly map. Our study is validated by the analysis of resolution and accuracy, and we further compare the result to shear-wave velocity models estimated from other active and passive experiments in the area.

  20. Seismic ambient noise study at Bouillante geothermal system, French Antilles

    Science.gov (United States)

    Jousset, Philippe; Bitri, Adnan; Loiseau, Justine; Bouchot, Vincent

    2010-05-01

    Seismic ambient noise analyses have been shown to be able to image structural features of the crust and to monitor underground changes of seismic wave ground velocity. We present results of cross-correlation techniques at Bouillante geothermal field, French Antilles, the largest French high-enthalpy geothermal system exploited for electrical power from 3 collocated productive wells. Two power plants generate electricity and fluid extraction rate varies with time and wells are sometimes closed for equipment maintenance. Under the support of the French Environment and Energy Management Agency (ADEME) and the French Research Agency (ANR), BRGM has been analyzing seismic data from a network comprising 5 broadband seismological stations set-up at Bouillante area since 2004. Amongst the large number of earthquakes recorded, we show that no single earthquake could be related to the fluid exploitation. Instead, they are due to the intense regional seismicity. Despite the small number of stations, surface wave travel times computed from ambient noise cross-correlation for about a year suggest that the velocity structure is consistent with the conceptual model of hot (250°C) and permeable (fractured) geothermal reservoir of Bouillante. We show at several instances that changes of the fluid extraction rate have spatial and temporal slight perturbations on medium wave velocity. For example, when the production stops for maintenance, velocity increases by several percent and with larger amplitude at stations within 1 km distance from the production wells and lower amplitudes (by more than 50 %) at stations further than 2 km from the production wells. In addition, we note that velocity perturbations have a delay of at most 1 day at further stations. We discuss several mechanisms to explain those observations like pressure and stress variations in the geothermal system. The results suggest that the inferred velocity changes, owing the fine sensibility of the inter

  1. Anisotropic Lithospheric Structure of Southern Madagascar from Ambient Seismic Noise

    Science.gov (United States)

    Dreiling, J.; Tilmann, F. J.; Yuan, X.; Rumpker, G.

    2016-12-01

    The island of Madagascar occupied a key region in both the assembly and the multi-stage breakup of Gondwana. Madagascar consists of amalgamated continental material comprising several distinct tectonic units. Because of its key role in the assembly of Gondwana, numerous geological and geophysical investigations have been carried out in Madagascar to understand the evolution of Gondwana.The aim of this study is to characterize the lithospheric structure of Southern Madagascar using ambient seismic noise correlation. Radial anisotropy is determined to learn about the crust/mantle deformation around the central Southern Madagascan shear zones (i.e. the Ampanihy, Beraketa and Ranotsara shear zones) and to shed light on the geological development of Madagascar and its role during the breakup of Gondwana. In the analysis we included seismic data from the SELASOMA project in Southern Madagascar, which is a passive seismic experiment carried out by the GFZ German Research Centre for Geosciences from May 2012 to May 2014. Seismic data recorded by 61 three-component seismometers were pre-processed and cross-correlated. Group velocity dispersion curves were picked manually for the vertical-vertical and transverse-transverse component correlations, which represent the Rayleigh (ZZ) and Love (TT) surface waves, respectively. Velocities from periods between 0.7 and 20 seconds are used for tomography and computation of radial anisotropy of the lithosphere.

  2. Development of a low cost method to estimate the seismic signature of a geothermal field form ambient noise analysis.

    Energy Technology Data Exchange (ETDEWEB)

    Tibuleac, Ileana [Univ. of Nevada, Reno, NV (United States)

    2016-06-30

    A new, cost effective and non-invasive exploration method using ambient seismic noise has been tested at Soda Lake, NV, with promising results. The material included in this report demonstrates that, with the advantage of initial S-velocity models estimated from ambient noise surface waves, the seismic reflection survey, although with lower resolution, reproduces the results of the active survey when the ambient seismic noise is not contaminated by strong cultural noise. Ambient noise resolution is less at depth (below 1000m) compared to the active survey. In general, the results are promising and useful information can be recovered from ambient seismic noise, including dipping features and fault locations.

  3. Ambient noise tomography of the East African Rift in Mozambique

    Science.gov (United States)

    Domingues, Ana; Silveira, Graça; Ferreira, Ana M. G.; Chang, Sung-Joon; Custódio, Susana; Fonseca, João F. B. D.

    2016-03-01

    Seismic ambient noise tomography is applied to central and southern Mozambique, located in the tip of the East African Rift (EAR). The deployment of MOZART seismic network, with a total of 30 broad-band stations continuously recording for 26 months, allowed us to carry out the first tomographic study of the crust under this region, which until now remained largely unexplored at this scale. From cross-correlations extracted from coherent noise we obtained Rayleigh wave group velocity dispersion curves for the period range 5-40 s. These dispersion relations were inverted to produce group velocity maps, and 1-D shear wave velocity profiles at selected points. High group velocities are observed at all periods on the eastern edge of the Kaapvaal and Zimbabwe cratons, in agreement with the findings of previous studies. Further east, a pronounced slow anomaly is observed in central and southern Mozambique, where the rifting between southern Africa and Antarctica created a passive margin in the Mesozoic, and further rifting is currently happening as a result of the southward propagation of the EAR. In this study, we also addressed the question concerning the nature of the crust (continental versus oceanic) in the Mozambique Coastal Plains (MCP), still in debate. Our data do not support previous suggestions that the MCP are floored by oceanic crust since a shallow Moho could not be detected, and we discuss an alternative explanation for its ocean-like magnetic signature. Our velocity maps suggest that the crystalline basement of the Zimbabwe craton may extend further east well into Mozambique underneath the sediment cover, contrary to what is usually assumed, while further south the Kaapval craton passes into slow rifted crust at the Lebombo monocline as expected. The sharp passage from fast crust to slow crust on the northern part of the study area coincides with the seismically active NNE-SSW Urema rift, while further south the Mazenga graben adopts an N-S direction

  4. The influence of ambient noise on maternal behavior in a Bornean sun bear (Helarctos malayanus euryspilus).

    Science.gov (United States)

    Owen, Megan A; Hall, Suzanne; Bryant, Lisa; Swaisgood, Ronald R

    2014-01-01

    Anthropogenic noise has become a pervasive feature of both marine and terrestrial habitats worldwide. While a comprehensive understanding of the biologically significant impacts of noise on wildlife is lacking, concerns regarding its influence persist. Noise is also a common feature in the zoological setting, and much can be learned regarding the species-typical response to ambient noise by studying animals in captivity. Here we correlate behavioral and vocal patterns in a Bornean sun bear (Helarctos malayanus euryspilus) mother and cub with ambient noise levels during the 6-month post-partum period. We hypothesized that loud ambient noise would be correlated with changes in behavior, and predicted that noise would be negatively correlated with maternal care behavior, potentially masking cub vocalizations or providing a distraction to the mother. Contrary to expectation, we found that the mother spent significantly more time attending to her cub (P=0.03) on loud days. We also found that she tended to spend less time feeding (P=0.08); however her time spent resting was not affected. The cub was approximately twice as vocal on loud days, although these results were not statistically significant (humming: P=0.10; squawks/cries: P=0.14). Taken together, these results suggest that the behavioral response to ambient noise may have potential energetic costs, and as a result efforts should be made to reduce ambient noise exposure during the post-partum period.

  5. The Effects of Ambient Conditions on Helicopter Harmonic Noise Radiation: Theory and Experiment

    Science.gov (United States)

    Greenwood, Eric; Sim, Ben W.; Boyd, D. Douglas, Jr.

    2016-01-01

    The effects of ambient atmospheric conditions, air temperature and density, on rotor harmonic noise radiation are characterized using theoretical models and experimental measurements of helicopter noise collected at three different test sites at elevations ranging from sea level to 7000 ft above sea level. Significant changes in the thickness, loading, and blade-vortex interaction noise levels and radiation directions are observed across the different test sites for an AS350 helicopter flying at the same indicated airspeed and gross weight. However, the radiated noise is shown to scale with ambient pressure when the flight condition of the helicopter is defined in nondimensional terms. Although the effective tip Mach number is identified as the primary governing parameter for thickness noise, the nondimensional weight coefficient also impacts lower harmonic loading noise levels, which contribute strongly to low frequency harmonic noise radiation both in and out of the plane of the horizon. Strategies for maintaining the same nondimensional rotor operating condition under different ambient conditions are developed using an analytical model of single main rotor helicopter trim and confirmed using a CAMRAD II model of the AS350 helicopter. The ability of the Fundamental Rotorcraft Acoustics Modeling from Experiments (FRAME) technique to generalize noise measurements made under one set of ambient conditions to make accurate noise predictions under other ambient conditions is also validated.

  6. Surface wave tomography of Europe from ambient seismic noise

    Science.gov (United States)

    Lu, Yang; Stehly, Laurent; Paul, Anne

    2017-04-01

    We present a European scale high-resolution 3-D shear wave velocity model derived from ambient seismic noise tomography. In this study, we collect 4 years of continuous seismic recordings from 1293 stations across much of the European region (10˚W-35˚E, 30˚N-75˚N), which yields more than 0.8 million virtual station pairs. This data set compiles records from 67 seismic networks, both permanent and temporary from the EIDA (European Integrated Data Archive). Rayleigh wave group velocity are measured at each station pair using the multiple-filter analysis technique. Group velocity maps are estimated through a linearized tomographic inversion algorithm at period from 5s to 100s. Adaptive parameterization is used to accommodate heterogeneity in data coverage. We then apply a two-step data-driven inversion method to obtain the shear wave velocity model. The two steps refer to a Monte Carlo inversion to build the starting model, followed by a linearized inversion for further improvement. Finally, Moho depth (and its uncertainty) are determined over most of our study region by identifying and analysing sharp velocity discontinuities (and sharpness). The resulting velocity model shows good agreement with main geological features and previous geophyical studies. Moho depth coincides well with that obtained from active seismic experiments. A focus on the Greater Alpine region (covered by the AlpArray seismic network) displays a clear crustal thinning that follows the arcuate shape of the Alps from the southern French Massif Central to southern Germany.

  7. Unusually loud ambient noise in tidewater glacier fjords: a signal of ice melt

    Science.gov (United States)

    Pettit, Erin C.; Lee, Kevin M.; Brann, Joel P.; Nystuen, Jeffrey A.; Wilson, Preston S.; O'Neel, Shad

    2015-01-01

    In glacierized fjords, the ice-ocean boundary is a physically and biologically dynamic environment that is sensitive to both glacier flow and ocean circulation. Ocean ambient noise offers insight into processes and change at the ice-ocean boundary. Here we characterize fjord ambient noise and show that the average noise levels are louder than nearly all measured natural oceanic environments (significantly louder than sea ice and non-glacierized fjords). Icy Bay, Alaska has an annual average sound pressure level of 120 dB (re 1 μPa) with a broad peak between 1000 and 3000 Hz. Bubble formation in the water column as glacier ice melts is the noise source, with variability driven by fjord circulation patterns. Measurements from two additional fjords, in Alaska and Antarctica, support that this unusually loud ambient noise in Icy Bay is representative of glacierized fjords. These high noise levels likely alter the behavior of marine mammals.

  8. Ambient Noise Surface Wave Tomography for Geotechnical Monitoring Using "Large N" Distributed Acoustic Sensing

    Science.gov (United States)

    Ajo Franklin, J. B.; Lindsey, N.; Martin, E. R.; Wagner, A. M.; Robertson, M.; Bjella, K.; Gelvin, A.; Ulrich, C.; Wu, Y.; Freifeld, B. M.; Daley, T. M.; Dou, S.

    2015-12-01

    Surface wave tomography using ambient noise sources has found broad application at the regional scale but has not been adopted fully for geotechnical applications despite the abundance of noise sources in this context. The recent development of Distributed Acoustic Sensing (DAS) provides a clear path for inexpensively recording high spatial resolution (survey as well as direct-push data on ice content. We also compare vintages of ambient noise DAS data to evaluate the short-term repeatability of the technique in the face of changing noise environments. The resulting dataset demonstrates the utility of using DAS for real-time shear-modulus monitoring in support of critical infrastructure.

  9. Ambient and at-the-ear occupational noise exposure and serum lipid levels

    DEFF Research Database (Denmark)

    Arlien-Søborg, Mai C; Schmedes, Astrid S; Stokholm, Z A

    2016-01-01

    workers to obtain contrast in noise exposure levels. They provided a serum sample and wore portable dosimeters that every 5-s recorded ambient noise exposure levels during a 24-h period. We extracted measurements obtained during work and calculated the full-shift mean ambient noise level. For 331 workers......-the-ear occupational noise exposure and serum levels of total cholesterol, low-density lipoprotein-cholesterol, high-density lipoprotein-cholesterol, and triglycerides when accounting for well-established predictors of lipid levels. METHODS: This cross-sectional study included 424 industrial workers and 84 financial...

  10. Ambient Noise Classification in the Gulf of Mexico

    Science.gov (United States)

    2007-10-01

    Gulf of Mexico during 2004 and 2005. The data were recorded continuously and have a bandwidth of 10-1000 Hz. Two-minute averages of Short Time Fourier Transforms (STFT) of the data were computed. The processed data contain wind and wave noise, distant shipping, nearby shipping and storm passage noise with amplitude variation spanning multiple time scales. These contributions to the overall noise level are additive in producing the total measured noise level at any time. An heuristic scheme based on determining the local mean noise level over a period of several

  11. Full waveform ambient noise tomography of Mount Rainer

    Science.gov (United States)

    Flinders, A. F.; Shen, Y.

    2014-12-01

    Mount Rainier towers over the landscape of western Washington, ranking with Fuji-yama in Japan, Mt. Pinatubo in the Philippines, and Mt. Vesuvius in Italy, as one of the great stratovolcanoes of the world. Notwithstanding it's picturesque stature, Mt. Rainier is potentially the most devastating stratovolcano in North America, with more than 3.5 million people living beneath its shadow in the Seattle-Tacoma area. The primary hazard posed by the volcano is in the form of highly destructive volcanic debris flows (lahars). These lahars form when water and/or melted ice erode away and entrain preexisting volcanic sediment. At Mt. Rainier these flows are often initiated by sector collapse of the volcano's hydrothermally rotten flanks and compounded from Mt. Rainier's extensive snow and glacial ice coverage. It is therefore imperative to ascertain the extent of summit hydrothermal alteration within the volcano, and determine areas prone to collapse. Despite being one of the sixteen volcanoes globally designated by the International Association of Volcanology and Chemistry of the Earth's Interior as warranting detailed and focused study, Mt. Rainier remains enigmatic both in terms of shallow internal structure and the degree of summit hydrothermal alteration. We image this shallow internal structure and areas of possible summit alteration using ambient noise tomography. Our full waveform forward modeling includes high-resolution topography, allowing us to accurately account for the effects of topography on the propagation of short-period Rayleigh waves. Empirical Green's functions were extracted from 80 stations within 200 km of Mount Rainier and compared with synthetic greens functions over multiple frequency bands from 2-28 seconds. The preliminary model shows a broad (60 km wide) low shear-wave velocity anomaly in the mid-crust beneath the volcano. The mid-crust low-velocity body extends to the surface beneath the volcano summit in a narrow near-vertical conduit, the

  12. Investigation of ambient seismic noise using seismic interferometry in western Montana

    Science.gov (United States)

    Krzywosz, Natalia

    Passive seismic interferometry is a process by which ambient noise data recorded at different seismic stations can be cross-correlated to estimate Green's functions. In the past, both surface waves and body waves have successfully been extracted by cross-correlation of ambient noise data on both regional and global scales. In this study, I have generated Matlab code to simulate an application of seismic interferometry on a synthetic model with pre-defined layers and p-wave velocities. For areas with known velocity models, the Matlab code produced in this study can be used to generate synthetic seismograms, and model the effects of cross-correlation on receiver responses. In order to develop a general understanding of the ambient noise wavefield in western Montana, a spectral analysis program was developed in Matlab. This program is used to process ambient noise data from the Transportable Array (TA) Seismographic Network, and to generate its power spectral density plots and probability density functions. The detailed spectral analysis provides some insight to the ambient noise sources, and their energy distribution throughout western Montana. In addition, an attempt was made to preprocess ambient noise data from the TA array in Matlab for later use. Although preprocessing of the data was successful, limitations in computing power and time, allowed for temporal stacking of only one month of data. The one month period was not long enough to produce Green's functions which contain coherent body waves.

  13. Ambient noise correlation on the Amery Ice Shelf, East Antarctica

    Science.gov (United States)

    Zhan, Zhongwen; Tsai, Victor C.; Jackson, Jennifer M.; Helmberger, Don

    2014-03-01

    The structure of ice shelves is important for modelling the dynamics of ice flux from the continents to the oceans. While other, more traditional techniques provide many constraints, passive imaging with seismic noise is a complementary tool for studying and monitoring ice shelves. As a proof of concept, here we study noise cross-correlations and autocorrelations on the Amery Ice Shelf, East Antarctica. We find that the noise field on the ice shelf is dominated by energy trapped in a low-velocity waveguide caused by the water layer below the ice. Within this interpretation, we explain spectral ratios of the noise cross-correlations as P-wave resonances in the water layer, and obtain an independent estimate of the water-column thickness, consistent with other measurements. For stations with noise dominated by elastic waves, noise autocorrelations also provide similar results. High-frequency noise correlations also require a 50-m firn layer near the surface with P-wave velocity as low as 1 km s-1. Our study may also provide insight for future planetary missions that involve seismic exploration of icy satellites such as Titan and Europa.

  14. Evidence of the non-extensive character of Earth's ambient noise.

    Science.gov (United States)

    Koutalonis, Ioannis; Vallianatos, Filippos

    2017-04-01

    Investigation of dynamical features of ambient seismic noise is one of the important scientific and practical research challenges. In the same time there isgrowing interest concerning an approach to study Earth Physics based on thescience of complex systems and non extensive statistical mechanics which is a generalization of Boltzmann-Gibbs statistical physics (Vallianatos et al., 2016).This seems to be a promising framework for studying complex systems exhibitingphenomena such as, long-range interactions, and memory effects. Inthis work we use non-extensive statistical mechanics and signal analysis methodsto explore the nature of ambient noise as measured in the stations of the HSNC in South Aegean (Chatzopoulos et al., 2016). In the present work we analyzed the de-trended increments time series of ambient seismic noise X(t), in time windows of 20 minutes to 10 seconds within "calm time zones" where the human-induced noise presents a minimum. Following the non extensive statistical physics approach, the probability distribution function of the increments of ambient noise is investigated. Analyzing the probability density function (PDF)p(X), normalized to zero mean and unit varianceresults that the fluctuations of Earth's ambient noise follows a q-Gaussian distribution asdefined in the frame of non-extensive statisticalmechanics indicated the possible existence of memory effects in Earth's ambient noise. References: F. Vallianatos, G. Papadakis, G. Michas, Generalized statistical mechanics approaches to earthquakes and tectonics. Proc. R. Soc. A, 472, 20160497, 2016. G. Chatzopoulos, I.Papadopoulos, F.Vallianatos, The Hellenic Seismological Network of Crete (HSNC): Validation and results of the 2013 aftershock,Advances in Geosciences, 41, 65-72, 2016.

  15. APL-UW Deep Water Propagation: Philippine Sea Signal Physics and North Pacific Ambient Noise and NPANL Support

    Science.gov (United States)

    2014-09-30

    APL-UW Deep Water Propagation: Philippine Sea Signal Physics and North Pacific Ambient Noise and NPANL Support Rex K. Andrew Principal...signals evolve during propagation through a dynamically-varying deep ocean, and how the oceanic ambient noise field varies throughout deep ocean...specifically the Philippine Sea. The second objective is to continue an 18-year long experiment utilizing the North Pacific Ambient Noise Laboratory to

  16. Ambient Noise and Surface Wave Dissipation in the Ocean

    Science.gov (United States)

    1993-06-21

    movie camem snhozed with the soundtrack , Bmane & Cato (1988) 3 found that the noise bunst detected by a hydrophone cm.rVonded to the bubble formation at...I where 0 is the solid angle, B(G) is the beam pattem of the hydrophone and S(Q) is the sound source pattern. 3 I 202 Visa, - - - - - - - - - - film

  17. Combined Annoyance Assessment of Subway Train-Induced Structural Vibration and Ambient Noise

    Directory of Open Access Journals (Sweden)

    Ke Sun

    2016-01-01

    Full Text Available The subway train-induced structural vibration and ambient noise may cause annoyance and other negative influences on the human body. Presently, limited models have been developed to execute the quantitative evaluation of the combined annoyance caused by both structural vibration and ambient noise. In this study, a fuzzy membership function and normal distribution function were coupled to describe the fuzziness and randomness of human annoyance responses; a novel annoyance evaluation model was proposed to assess the structural vibration and ambient noise; and the annoyance of human was classified into six grades. Subsequently, we integrated an actual case into this study to calculate and analyze the combined annoyance degree. The applied results were compared with the standard limits, in which the rationality and superiority of the proposed model were verified. The results exhibit the notion that the proposed models perform well and can serve as a reference for spatial planning and development in the nearby subway environment.

  18. Self-organizing map and its application in the analysis of ambient noise characteristics

    Science.gov (United States)

    Meng, Chunxia; Li, Guijuan; Che, Shuwei; Bai, Jin

    2017-01-01

    The Self-organizing map (SOM) is an unsupervised neural network based on competitive learning, and can solve the problem that the center of clustering is unknown. SOM's theory and the implementation of algorithm are studied in this paper. Simulating example is given to approve the feasibility of SOM in characteristic assessment for multivariate sample. The Ambient sea noise measurement is made in August 2014 on some sea of China. The total source level was forecasted using "ROSS formula" and the sailing information. The statistical variability of broadband ambient noise at frequencies between 20Hz and 31.5 kHz is obtained using SOM. The comparison between measured sound pressure and forecasting pressure is given, and the preliminary analysis of the relationship between ambient noise level and vessels is carried out. The results provide the technical reference to understand the temporal and spatial statistical variability of ambient noise, and are an efficient tool in assessing the potential effect of shipping noise on marine mammals in the special sea area.

  19. Frequency domain analysis of errors in cross-correlations of ambient seismic noise

    Science.gov (United States)

    Liu, Xin; Ben-Zion, Yehuda; Zigone, Dimitri

    2016-12-01

    We analyse random errors (variances) in cross-correlations of ambient seismic noise in the frequency domain, which differ from previous time domain methods. Extending previous theoretical results on ensemble averaged cross-spectrum, we estimate confidence interval of stacked cross-spectrum of finite amount of data at each frequency using non-overlapping windows with fixed length. The extended theory also connects amplitude and phase variances with the variance of each complex spectrum value. Analysis of synthetic stationary ambient noise is used to estimate the confidence interval of stacked cross-spectrum obtained with different length of noise data corresponding to different number of evenly spaced windows of the same duration. This method allows estimating Signal/Noise Ratio (SNR) of noise cross-correlation in the frequency domain, without specifying filter bandwidth or signal/noise windows that are needed for time domain SNR estimations. Based on synthetic ambient noise data, we also compare the probability distributions, causal part amplitude and SNR of stacked cross-spectrum function using one-bit normalization or pre-whitening with those obtained without these pre-processing steps. Natural continuous noise records contain both ambient noise and small earthquakes that are inseparable from the noise with the existing pre-processing steps. Using probability distributions of random cross-spectrum values based on the theoretical results provides an effective way to exclude such small earthquakes, and additional data segments (outliers) contaminated by signals of different statistics (e.g. rain, cultural noise), from continuous noise waveforms. This technique is applied to constrain values and uncertainties of amplitude and phase velocity of stacked noise cross-spectrum at different frequencies, using data from southern California at both regional scale (˜35 km) and dense linear array (˜20 m) across the plate-boundary faults. A block bootstrap resampling method

  20. Spatial coherences of the sound pressure and the particle velocity in underwater ambient noise

    Institute of Scientific and Technical Information of China (English)

    YAN Jin; LUO Xianzhi; HOU Chaohuan

    2007-01-01

    The spatial coherences were investigated between the sound pressure and the three orthogonal components of the particle velocity in underwater ambient noise. Based on the ray theory, integral expression was derived for the spatial coherence matrix of the sound pressure and the particle velocity in a stratified ocean with dipole noise sources homogenously distributed on the surface. The integrand includes a multiplying factor of the vertical directivity of the noise intensity, and the layered ocean environment affects the spatial coherences via this directivity factor. For a shallow water environment and a semi-infinite homogenous medium, the coherence calculation results were given. It was showed that the sound speed profile and the sea bottom could not be neglected in determining the spatial coherences of the ambient noise vector field.

  1. Sub-bottom profiling with ambient noise measured on a drifting vertical array

    NARCIS (Netherlands)

    Harrison, C.H.; Schippers, P.; Snellen, M.; Weterings, A.

    2005-01-01

    The angle and frequency dependent reflective properties of the seabed can be determined from beam-steered ambient noise measurements on a vertical array of hydrophones. From the up-to-down ratio the beam-smeared modulus square of the plane wave reflection coefficient is obtained. Geo-acoustic parame

  2. Effects of bladdered fish on ambient noise measurements close to the port of Rotterdam

    NARCIS (Netherlands)

    Ainslie, M.A.; Jong C.A.F. de; Dreschler, J.

    2011-01-01

    Ambient noise in the frequency range 25 Hz to 80 kHz was measured at a site close to the Port of Rotterdam in September 2008, before construction began of a port extension known as ‘Maasvlakte 2’ [http://www.maasvlakte2.com/en/index/], and in September-October 2009 (during construction). Day-night

  3. The crustal structure beneath the Netherlands inferred from ambient seismic noise

    NARCIS (Netherlands)

    Yudistira, T.

    2015-01-01

    A 3-D shear velocity model of the crust beneath the Netherlands is determined from fundamental mode Rayleigh and Love wave group measurements derived from ambient seismic noise recordings. The data are obtained from a temporary array of broad-band seismometers in and around the Netherlands (the NARS

  4. Examining ambient noise using colocated measurements of rotational and translational motion

    Science.gov (United States)

    Hadziioannou, Celine; Gaebler, Peter; Schreiber, Ulrich; Wassermann, Joachim; Igel, Heiner

    2012-10-01

    In the past decade, a number of studies have reported the observation of rotational motion associated with seismic events. We report a first observation of rotational motion in the microseismic ambient noise band. A striking feature of rotational motion measurements is that the information about the seismic phase velocity and source back azimuth is contained in the amplitude ratio of a point measurement of rotation rate and transverse acceleration. We investigate the possibility of applying this method to ambient noise measured with a ring laser and a broadband seismometer at the Wettzell Geodetic Observatory in Germany. Using data in the secondary microseismic band, we recover local phase velocities as well as the back azimuth of the strongest noise source for two different time periods. In order to confirm these findings, we additionally compare the results with classical array processing techniques of the Gräfenberg array located nearby.

  5. Monitoring southwest Greenland's ice sheet melt with ambient seismic noise.

    Science.gov (United States)

    Mordret, Aurélien; Mikesell, T Dylan; Harig, Christopher; Lipovsky, Bradley P; Prieto, Germán A

    2016-05-01

    The Greenland ice sheet presently accounts for ~70% of global ice sheet mass loss. Because this mass loss is associated with sea-level rise at a rate of 0.7 mm/year, the development of improved monitoring techniques to observe ongoing changes in ice sheet mass balance is of paramount concern. Spaceborne mass balance techniques are commonly used; however, they are inadequate for many purposes because of their low spatial and/or temporal resolution. We demonstrate that small variations in seismic wave speed in Earth's crust, as measured with the correlation of seismic noise, may be used to infer seasonal ice sheet mass balance. Seasonal loading and unloading of glacial mass induces strain in the crust, and these strains then result in seismic velocity changes due to poroelastic processes. Our method provides a new and independent way of monitoring (in near real time) ice sheet mass balance, yielding new constraints on ice sheet evolution and its contribution to global sea-level changes. An increased number of seismic stations in the vicinity of ice sheets will enhance our ability to create detailed space-time records of ice mass variations.

  6. Body Waves Revealed by Spatial Stacking on Long-Term Cross-Correlation of Ambient Noise

    Institute of Scientific and Technical Information of China (English)

    Kai Wang; Yinhe Luo; Kaifeng Zhao; Limeng Zhang

    2014-01-01

    ABSTRCT: Theoretical and experimental studies indicate that complete Green’s Function can be retrieved from cross-correlation in a diffuse field. High SNR (signal-to-noise ratio) surface waves have been extracted from cross-correlations of long-duration ambient noise across the globe. Body waves, not extracted in most of ambient noise studies, are thought to be more difficult to retrieve from regular ambient noise data processing. By stacking cross-correlations of ambient noise in 50 km inter-station distance bins in China, western United States and Europe, we observed coherent 20–100 s core phases (ScS, PKIKPPKIKP, PcPPKPPKP) and crustal-mantle phases (Pn, P, PL, Sn, S, SPL, SnSn, SS, SSPL) at distances ranging from 0 to 4 000 km. Our results show that these crustal-mantle phases show diverse characteristics due to different substructure and sources of body waves beneath different regions while the core phases are relatively robust and can be retrieved as long as stations are available. Further analysis indicates that the SNR of these body-wave phases depends on a compromise between stacking fold in spatial domain and the coherence of pre-stacked cross-correlations.Spatially stacked cross-correlations of seismic noise can provide new virtual seismograms for paths that complement earthquake data and that contain valuable information on the structure of the Earth. The extracted crustal-mantle phases can be used to study lithospheric heterogeneities and the robust core phases are significantly useful to study the deep structure of the Earth, such as detecting fine heterogeneities of the core-mantle boundary and constraining differential rotation of the inner core.

  7. Stress Monitoring Potential of Ambient Noise Interferometry in Deep Mine Environments

    Science.gov (United States)

    Dales, P.; Audet, P.; Mercier, J. P.; de Beer, W.; Pascu, A.

    2015-12-01

    Understanding the response of the rock mass to mining is of key importance for the planning of mine operations as well as assessing and mitigating the seismic risk. For decades, studies have shown that passive source tomography, also called local earthquake tomography, can provide information on the rock mass response through the estimation of the temporal variation and 3D distribution (spatio-temporal variations) of stress. The spatio-temporal resolution afforded by passive source tomography depends on the seismicity rate and the location of microseismic events. In a mine, seismicity is not stationary, i.e. the locus and rate of seismicity vary with time, thus limiting the spatio-temporal resolution of this technique. Recent developments in the field of ambient noise seismic interferometry (Green's function retrieval from ambient noise) provide hints that continuous recordings of ambient vibrations collected around mines could be used to obtain information on the evolution and 3D distribution of the stress in the rock mass by providing measures of seismic travel times between pairs of sensors. In contrast to passive source tomography that relies on the distribution of seismic events, the resolution afforded by ambient noise interferometry tomography depends solely on the locations of sensors and the frequency content of the ambient noise. We present preliminary results which focus on the temporal stability of the estimated Green's functions, the effect of mine infrastructure on signal quality and preliminary methods to quantify stress changes in the rock mass. In addition, we present the adopted processing scheme built on the Apache Spark engine and demonstrate its effectiveness in parallelizing the computationally intensive cross-correlation routines.

  8. Crustal Structure of the Pakistan Himalayas from Ambient Noise and Seismic Rayleigh Wave Inversion

    Science.gov (United States)

    Li, A.

    2007-05-01

    The western Himalayan syntaxi is a unique feature resulted from the India-Asia collision and its formation remains poorly understood. To image crustal structure in the western syntaxi, we analyze Rayleigh waves from ambient seismic noise and earthquake data recorded during the Pakistan Broadband Seismic Experiment. The Pakistan experiment included 9 broadband stations with an aperture of ~200 km and operated from September to December in 1992. We compute cross-correlations of ambient noise data on an hourly base and stack all the cross-correlations for 70 days to produce the estimated Green functions. Power spectrum analysis shows that the dominant energy is from 0.15 to 0.25 Hz and from 0.05 to 0.07 Hz, consistent with the well-know background seismic noise. A phase with large amplitude appears at near zero time on almost all stacked cross- correlations and its origin is not clear to us at this moment. Rayleigh waves can be clearly observed for station pairs at the distance of 80 km and larger but are contaminated by the near zero time phase at shorter station spacing. Rayleigh wave phase velocities at periods of 4 to 15 s will be produced from the ambient noise data. Using regional and teleseismic earthquakes, we expect to obtain Rayleigh wave dispersions at periods from 15 to 50 s. The phase velocities from both datasets will be inverted for crustal thickness and shear-wave structure beneath the Pakistan Himalayas.

  9. Estimating amplitude uncertainty for normalized ambient seismic noise cross-correlation with examples from southern California

    Science.gov (United States)

    Liu, X.; Beroza, G. C.; Ben-Zion, Y.

    2016-12-01

    We estimate the frequency-dependent amplitude error of ambient noise cross-correlations based on the method of Liu et al. (2016) for different normalizations. We compute the stacked cross spectrum of noise recorded at station pairs in southern California by averaging the cross spectrum of evenly spaced windows of the same length, but offset in time. Windows with signals (e.g. earthquakes) contaminating the ambient seismic noise are removed as statistical outliers. Standard errors of the real and imaginary parts of the stacked cross-spectrum are estimated assuming each window is independent. The autocorrelation of the sequence of cross-spectrum values at a given frequency obtained from different windows are used to test the independence of cross-spectrum values in neighboring time windows. For frequencies below 0.2 Hz, we find temporal correlation in the noise data. We account for temporal correlation in computation of errors using a block bootstrap resampling method. The stacked cross-spectrum and associated amplitude are computed under different normalization methods including deconvolution and whitening applied before or after ensemble average of cross-spectrum values. We estimate the amplitude errors based on error propagation from errors of stacked cross-spectrum and verified by bootstrap method. We propose to use this characterization of amplitude uncertainty to constrain uncertainties in ground motion predictions based on ambient-field observations.

  10. 4-D monitoring of the Solfatara crater (Italy) by ambient noise tomography

    Science.gov (United States)

    Pilz, M.; Woith, H.; Parolai, S.; Festa, G.

    2014-12-01

    Imaging shallow subsurface structures and monitoring related temporal variations are two of the main tasks for modern seismology. Although many observations have reported temporal velocity changes, e.g., in volcanic areas and on landslides, new methods based on passive sources like ambient seismic noise can provide accurate spatially and temporally resolved information on the velocity structure and on velocity changes. The success of these passive applications is explained by the fact that these methods are based on surface waves which are always present in the ambient seismic noise wave field because they are excited preferentially by superficial sources. Such surface waves can easily be extracted because they dominate the Green´s function between receivers located at the surface. For real-time monitoring of the shallow velocity structure of the Solfatara crater, one the forty volcanoes in the Campi Flegrei area characterized by an intense hydrothermal activity due to the interaction of deep convection and meteoric water, we have installed a dense network of 50 seismological sensing units covering the whole surface area in the framework of the European project MED-SUV. Continuous recordings of the ambient seismic noise over several days as well as signals of an active vibroseis source have been used. Based on a weighted inversion procedure for 3D-passive imaging using ambient noise cross-correlations of both Rayleigh and Love waves, we will present a high-resolution velocity model of the structure beneath the Solfatara crater. We discuss why and how it is possible to perform high precision and real-time monitoring of temporal changes in the properties of the propagation medium at small scales. In particular, we will focus on the depth resolution of the presented approach and further discuss the perspectives of noise-based real-time 4-D tomography.

  11. On the retrieval of attenuation and site amplification from ambient noise on linear arrays

    Science.gov (United States)

    Weaver, R. L.

    2012-12-01

    Retrieval of seismic velocities from arrival times in ambient noise correlations is well established. Correlation amplitudes are less well understood. Such amplitudes clearly contain information on seismic attenuation, but they are also affected by ambient noise directionality, site amplification factors, and data preprocessings. From theorems stating that noise correlations are asymptotically identifiable as Green's function times specific intensity, in turn governed by radiative transport equations, we may conclude that amplitudes are simply proportional to the usual geometric and exponential attenuation factors and also to the noise field's intensity at the pseudo-source towards the pseudo-receiver. This suggests that attenuation and site amplfication factors and noise intensity may be recoverable from observed correlation amplitudes and fit procedures well informed by theory. The above is tested by correlating the records from line arrays of six of more stations as generated by numerical simulations of wave propagation scaled to a domain of 1000 km^2, with waves of 10 second period, anisotropic noise intensity, and seismic Q's of 20 to 200. Noise correlations are examined to confirm the theoretical picture and demonstrate accurate retrieval of spatially varying attenuation, site amplification factors, and specific intensity. After correlation amplitudes are extracted from raw data records, and their variances assessed, the amplitudes are used in linear least-squares fits to retrieve propagation parameters, aposteriori error estimates, and chi-square goodnesses of fit.hirty cross-correlation amplitudes X (given by error bars) amongst six stations in a line array fit well to predictions (filled circles) based on parameters retreived by least squares. The reduced chisquare of the fit is 1.11 Site factors and attenuations between neighboring stations are recovered accurately within 0.02 nepers. Data taken from a numerical simulations of two months of ten

  12. A survey of models for the prediction of ambient ocean noise: Circa 1995

    Energy Technology Data Exchange (ETDEWEB)

    Doolittle, R.

    1996-01-01

    The state of the art of model development for application to computer studies of undersea search systems utilizing acoustics is surveyed in this document. Due to the demands for surveillance of submarines operating in ocean basins, the development of noise models for application in deep oceans is fairly advanced and somewhat generic. This is due to the deep sound channel, discovered during World War II, which when present allows for long-range sound propagation with little or no interaction with the bottom. Exceptions to this channel, also well understood, are found in both the high latitudes where the sound is upward refracting and in tropical ocean areas with downward refracting sound transmission. The controlling parameter is the sound speed as a function of depth within the ocean, the sound speed profile. When independent of range, this profile may be converted to a noise-versus-depth profile with well-validated consequences for deep-ocean ambient noise. When considering ocean areas of shallow water, the littoral regions, the idea of a genenic ocean channel advisedly is abandoned. The locally unique nature of both the noise production mechanisms and of the channel carrying the sound, obviates the generic treatment. Nevertheless, idealizations of this case exist and promote the understanding if not the exact predictability of the statistics of shallow water ambient noise. Some examples of these models are given in this document.

  13. Beaked whale (Mesoplodon densirostris) passive acoustic detection in increasing ambient noise.

    Science.gov (United States)

    Ward, Jessica; Jarvis, Susan; Moretti, David; Morrissey, Ronald; Dimarzio, Nancy; Johnson, Mark; Tyack, Peter; Thomas, Len; Marques, Tiago

    2011-02-01

    Passive acoustic detection is being increasingly used to monitor visually cryptic cetaceans such as Blainville's beaked whales (Mesoplodon densirostris) that may be especially sensitive to underwater sound. The efficacy of passive acoustic detection is traditionally characterized by the probability of detecting the animal's sound emissions as a function of signal-to-noise ratio. The probability of detection can be predicted using accepted, but not necessarily accurate, models of the underwater acoustic environment. Recent field studies combining far-field hydrophone arrays with on-animal acoustic recording tags have yielded the location and time of each sound emission from tagged animals, enabling in-situ measurements of the probability of detection. However, tagging studies can only take place in calm seas and so do not reflect the full range of ambient noise conditions under which passive acoustic detection may be used. Increased surface-generated noise from wind and wave interaction degrades the signal-to-noise ratio of animal sound receptions at a given distance leading to a reduction in probability of detection. This paper presents a case study simulating the effect of increasing ambient noise on detection of M. densirostris foraging clicks recorded from a tagged whale swimming in the vicinity of a deep-water, bottom-mounted hydrophone array.

  14. Temporal changes in shear velocity from ambient noise at New Zealand geothermal fields

    Science.gov (United States)

    Civilini, F.; Savage, M. K.; Townend, J.

    2016-12-01

    We use ambient noise to compare shear velocity changes with geothermal production processes at the Ngatamariki and Rotokawa geothermal fields, located in the central North Island of New Zealand. We calculate shear velocity changes through an analysis of cross correlation functions of diffusive seismic wavefields between stations, which are proportional to Green's functions of the station path. Electricity production at Ngatamariki uses an 82 MW binary type power station manufactured by Ormat Technologies, which began operations in mid-2013 and is owned and operated by Mighty River Power. The "Nga Awa Purua" triple flash power plant at the Rotokawa geothermal field was established in 2010 with parnership between Mighty River Power and Tauhara North No. 2 trust and currently operates 174 MW of generation. The seismometers of both networks, deployed primarily to observe microseismicity within the field, were installed prior to well stimulation and the start of production. Although cultural noise dominates the energy spectrum, a strong natural ambient noise signal can be detected when filtering below 1 Hz. Despite similar noise settings, the signal-to-noise ratio of cross correlation stacks at Rotokawa was more than two times greater than at Ngatamariki. We use stacks of cross correlations between stations prior to the onset of production as references, and compare them with cross correlations of moving stacks in time periods of well stimulation and the onset of electricity production.

  15. pSIN: A scalable, Parallel algorithm for Seismic INterferometry of large-N ambient-noise data

    Science.gov (United States)

    Chen, Po; Taylor, Nicholas J.; Dueker, Ken G.; Keifer, Ian S.; Wilson, Andra K.; McGuffy, Casey L.; Novitsky, Christopher G.; Spears, Alec J.; Holbrook, W. Steven

    2016-08-01

    Seismic interferometry is a technique for extracting deterministic signals (i.e., ambient-noise Green's functions) from recordings of ambient-noise wavefields through cross-correlation and other related signal processing techniques. The extracted ambient-noise Green's functions can be used in ambient-noise tomography for constructing seismic structure models of the Earth's interior. The amount of calculations involved in the seismic interferometry procedure can be significant, especially for ambient-noise datasets collected by large seismic sensor arrays (i.e., "large-N" data). We present an efficient parallel algorithm, named pSIN (Parallel Seismic INterferometry), for solving seismic interferometry problems on conventional distributed-memory computer clusters. The design of the algorithm is based on a two-dimensional partition of the ambient-noise data recorded by a seismic sensor array. We pay special attention to the balance of the computational load, inter-process communication overhead and memory usage across all MPI processes and we minimize the total number of I/O operations. We have tested the algorithm using a real ambient-noise dataset and obtained a significant amount of savings in processing time. Scaling tests have shown excellent strong scalability from 80 cores to over 2000 cores.

  16. Upper crustal structure of Madeira Island revealed from ambient noise tomography

    Science.gov (United States)

    Matos, Catarina; Silveira, Graça; Matias, Luís; Caldeira, Rita; Ribeiro, M. Luísa; Dias, Nuno A.; Krüger, Frank; Bento dos Santos, Telmo

    2015-06-01

    We present the first image of the Madeira upper crustal structure, using ambient seismic noise tomography. 16 months of ambient noise, recorded in a dense network of 26 seismometers deployed across Madeira, allowed reconstructing Rayleigh wave Green's functions between receivers. Dispersion analysis was performed in the short period band from 1.0 to 4.0 s. Group velocity measurements were regionalized to obtain 2D tomographic images, with a lateral resolution of 2.0 km in central Madeira. Afterwards, the dispersion curves, extracted from each cell of the 2D group velocity maps, were inverted as a function of depth to obtain a 3D shear wave velocity model of the upper crust, from the surface to a depth of 2.0 km. The obtained 3D velocity model reveals features throughout the island that correlates well with surface geology and island evolution.

  17. Waveform modeling and inversion of ambient noise cross-correlation functions in a coastal ocean environment.

    Science.gov (United States)

    Zang, Xiaoqin; Brown, Michael G; Godin, Oleg A

    2015-09-01

    Theoretical studies have shown that cross-correlation functions (CFs) of time series of ambient noise measured at two locations yield approximations to the Green's functions (GFs) that describe propagation between those locations. Specifically, CFs are estimates of weighted GFs. In this paper, it is demonstrated that measured CFs in the 20-70 Hz band can be accurately modeled as weighted GFs using ambient noise data collected in the Florida Straits at ∼100 m depth with horizontal separations of 5 and 10 km. Two weighting functions are employed. These account for (1) the dipole radiation pattern produced by a near-surface source, and (2) coherence loss of surface-reflecting energy in time-averaged CFs resulting from tidal fluctuations. After describing the relationship between CFs and GFs, the inverse problem is considered and is shown to result in an environmental model for which agreement between computed and simulated CFs is good.

  18. Explore Seismic Velocity Change Associated with the 2010 Kaohsiung Earthquake by Ambient Noise Tomography

    Science.gov (United States)

    Ku, Chin-Shang; Wu, Yih-Min; Huang, Bor-Shouh; Huang, Win-Gee; Liu, Chun-Chi

    2016-04-01

    A ML 6.4 earthquake occurred on 4 March 2010 in Kaohsiung, the southern part of Taiwan, this shallow earthquake is the largest one of that area in the past few years. Some damages occurred on buildings and bridges after the earthquake, obvious surface deformation up to few cm was observed and the transportation including road and train traffic was also affected near the source area. Some studies about monitoring the velocity change induced by the big earthquake were carried out recently, most of studies used cross-correlation of the ambient noise-based method and indicated velocity drop was observed immediately after the big earthquake. However, this method is not able to constrain the depth of velocity change, and need to assume a homogeneous seismic velocity change during the earthquake. In this study, we selected 25 broadband seismic stations in the southern Taiwan and time period is from 2009/03 to 2011/03. Then we explored the velocity change associated with the 2010 Kaohsiung earthquake by applying ambient noise tomography (ANT) method. ANT is a way of using interferometry to image subsurface seismic velocity variations by using surface wave dispersions extracted from the ambient noise cross-correlation of seismic station-pairs, then the 2-D group velocity map with different periods could be extracted. Compare to ambient noise-based cross-correlation analysis, we estimated sensitivity kernel of dispersion curves and converted 2-D group velocity map from "with the period" to "with the depth" to have more constraints on the depth of velocity change. By subtracting shear velocity between "before" and "after" the earthquake, we could explore velocity change associated with the earthquake. Our result shows velocity reduction about 5-10% around the focal depth after the 2010 Kaohsiung earthquake and the post-seismic velocity recovery was observed with time period increasing, which may suggest a healing process of damaged rocks.

  19. Ocean Basin Impact of Ambient Noise on Marine Mammal Detectability, Distribution, and Acoustic Communication

    Science.gov (United States)

    2015-09-30

    1 DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited. Ocean Basin Impact of Ambient Noise on Marine Mammal ... mammal acoustic communication and signal detection. How short term variability and long term changes of ocean basin acoustics impact signal detection...signal detection as it relates to marine mammal active acoustic space and acoustic communication. This work increases the spatial range and time scale

  20. 4-D imaging and monitoring of the Solfatara crater (Italy) by ambient noise tomography

    Science.gov (United States)

    Pilz, Marco; Parolai, Stefano; Woith, Heiko; Gresse, Marceau; Vandemeulebrouck, Jean

    2016-04-01

    Imaging shallow subsurface structures and monitoring related temporal variations are two of the main tasks for modern geosciences and seismology. Although many observations have reported temporal velocity changes, e.g., in volcanic areas and on landslides, new methods based on passive sources like ambient seismic noise can provide accurate spatially and temporally resolved information on the velocity structure and on velocity changes. The success of these passive applications is explained by the fact that these methods are based on surface waves which are always present in the ambient seismic noise wave field because they are excited preferentially by superficial sources. Such surface waves can easily be extracted because they dominate the Greeńs function between receivers located at the surface. For real-time monitoring of the shallow velocity structure of the Solfatara crater, one of the forty volcanoes in the Campi Flegrei area characterized by an intense hydrothermal activity due to the interaction of deep convection and meteoric water, we have installed a dense network of 50 seismological sensing units covering the whole surface area in the framework of the European project MED-SUV (The MED-SUV project has received funding from the European Union Seventh Framework Programme FP7 under Grant agreement no 308665). Continuous recordings of the ambient seismic noise over several days as well as signals of an active vibroseis source have been used. Based on a weighted inversion procedure for 3D-passive imaging using ambient noise cross-correlations of both Rayleigh and Love waves, we will present a high-resolution shear-wave velocity model of the structure beneath the Solfatara crater and its temporal changes. Results of seismic tomography are compared with a 3-D electrical resistivity model and CO2 flux map.

  1. First results of an ambient seismic noise analysis in western Corinth Gulf (Greece)

    Science.gov (United States)

    Giannopoulos, Dimitrios; Paraskevopoulos, Paraskevas; Sokos, Efthimios; Tselentis, G.-Akis

    2015-04-01

    We present the preliminary results of an ambient seismic noise analysis performed in the western Corinth Gulf, Greece. The Corinth Gulf is a continental rift which separates the central Greek mainland from Peloponnese. The rift is approximately 120 km long and 10-20 km wide, with a WNW-ESE orientation, extending from the Gulf of Patras in the west, to the Gulf of Alkionides in the east. It is considered as one of the most active extensional intra-continental rifts in the world, with the geodetically measured rates of extension varying from ~5 mm/yr at the eastern part, to ~15 mm/yr at the western part. We used data from three-component broad-band seismic stations operated under the framework of the Hellenic Unified Seismological Network (HUSN) and the Corinth Rift Laboratory (CRL). After the classical processing of continuous ambient seismic noise recordings, we used both auto-correlation and cross-correlation functions of single stations and station pairs, respectively, in order to retrieve empirical Green's functions (EGFs) of surface waves and estimate relative velocity changes. For estimating the relative velocity changes we used the moving-window cross spectrum analysis (MWCS) technique. This is the first attempt to characterize the ambient seismic noise properties in the area and study the possible relation between the detected relative velocity changes and the occurrence of moderate or strong earthquakes in the study area.

  2. Potential Misidentification of Love-Wave Phase Velocity Based on Three-Component Ambient Seismic Noise

    Science.gov (United States)

    Xu, Zongbo; Xia, Jianghai; Luo, Yinhe; Cheng, Feng; Pan, Yudi

    2016-04-01

    People have calculated Rayleigh-wave phase velocities from vertical component of ambient seismic noise for several years. Recently, researchers started to extract Love waves from transverse component recordings of ambient noise, where "transverse" is defined as the direction perpendicular to a great-circle path or a line in small scale through observation sensors. Most researches assumed Rayleigh waves could be negligible, but Rayleigh waves can exist in the transverse component when Rayleigh waves propagate in other directions besides radial direction. In study of data acquired in western Junggar Basin near Karamay city, China, after processing the transverse component recordings of ambient noise, we obtain two energy trends, which are distinguished with Rayleigh-wave and Love-wave phase velocities, in the frequency-velocity domain using multichannel analysis of surface waves (MASW). Rayleigh waves could be also extracted from the transverse component data. Because Rayleigh-wave and Love-wave phase velocities are close in high frequencies (>0.1 Hz), two kinds of surface waves might be merged in the frequency-velocity domain. Rayleigh-wave phase velocities may be misidentified as Love-wave phase velocities. To get accurate surface-wave phase velocities from the transverse component data using seismic interferometry in investigating the shallow geology, our results suggest using MASW to calculate real Love-wave phase velocities.

  3. The Effects of Ambient Conditions on Helicopter Rotor Source Noise Modeling

    Science.gov (United States)

    Schmitz, Frederic H.; Greenwood, Eric

    2011-01-01

    A new physics-based method called Fundamental Rotorcraft Acoustic Modeling from Experiments (FRAME) is used to demonstrate the change in rotor harmonic noise of a helicopter operating at different ambient conditions. FRAME is based upon a non-dimensional representation of the governing acoustic and performance equations of a single rotor helicopter. Measured external noise is used together with parameter identification techniques to develop a model of helicopter external noise that is a hybrid between theory and experiment. The FRAME method is used to evaluate the main rotor harmonic noise of a Bell 206B3 helicopter operating at different altitudes. The variation with altitude of Blade-Vortex Interaction (BVI) noise, known to be a strong function of the helicopter s advance ratio, is dependent upon which definition of airspeed is flown by the pilot. If normal flight procedures are followed and indicated airspeed (IAS) is held constant, the true airspeed (TAS) of the helicopter increases with altitude. This causes an increase in advance ratio and a decrease in the speed of sound which results in large changes to BVI noise levels. Results also show that thickness noise on this helicopter becomes more intense at high altitudes where advancing tip Mach number increases because the speed of sound is decreasing and advance ratio increasing for the same indicated airspeed. These results suggest that existing measurement-based empirically derived helicopter rotor noise source models may give incorrect noise estimates when they are used at conditions where data were not measured and may need to be corrected for mission land-use planning purposes.

  4. Ocean acoustic remote sensing using ambient noise: results from the Florida Straits

    Science.gov (United States)

    Brown, M. G.; Godin, O. A.; Zang, X.; Ball, J. S.; Zabotin, N. A.; Zabotina, L. Y.; Williams, N. J.

    2016-07-01

    Noise interferometry is the process by which approximations to acoustic Green's functions, which describe sound propagation between two locations, are estimated by cross-correlating time series of ambient noise measured at those locations. Noise-interferometry-based approximations to Green's functions can be used as the basis for a variety of inversion algorithms, thereby providing a purely passive alternative to active-source ocean acoustic remote sensing. In this paper we give an overview of results from noise interferometry experiments conducted in the Florida Straits at 100 m depth in December 2012, and at 600 m depth in September/October 2013. Under good conditions for noise interferometry, estimates of cross-correlation functions are shown to allow one to perform advanced phase-coherent signal processing techniques to perform waveform inversions, estimate currents by exploiting non-reciprocity, perform time-reversal/back-propagation calculations and investigate modal dispersion using time-warping techniques. Conditions which are favourable for noise interferometry are identified and discussed.

  5. Ambient awareness: From random noise to digital closeness in online social networks.

    Science.gov (United States)

    Levordashka, Ana; Utz, Sonja

    2016-07-01

    Ambient awareness refers to the awareness social media users develop of their online network in result of being constantly exposed to social information, such as microblogging updates. Although each individual bit of information can seem like random noise, their incessant reception can amass to a coherent representation of social others. Despite its growing popularity and important implications for social media research, ambient awareness on public social media has not been studied empirically. We provide evidence for the occurrence of ambient awareness and examine key questions related to its content and functions. A diverse sample of participants reported experiencing awareness, both as a general feeling towards their network as a whole, and as knowledge of individual members of the network, whom they had not met in real life. Our results indicate that ambient awareness can develop peripherally, from fragmented information and in the relative absence of extensive one-to-one communication. We report the effects of demographics, media use, and network variables and discuss the implications of ambient awareness for relational and informational processes online.

  6. Pre-processing ambient noise cross-correlations with equalizing the covariance matrix eigenspectrum

    Science.gov (United States)

    Seydoux, Léonard; de Rosny, Julien; Shapiro, Nikolai M.

    2017-09-01

    Passive imaging techniques from ambient seismic noise requires a nearly isotropic distribution of the noise sources in order to ensure reliable traveltime measurements between seismic stations. However, real ambient seismic noise often partially fulfils this condition. It is generated in preferential areas (in deep ocean or near continental shores), and some highly coherent pulse-like signals may be present in the data such as those generated by earthquakes. Several pre-processing techniques have been developed in order to attenuate the directional and deterministic behaviour of this real ambient noise. Most of them are applied to individual seismograms before cross-correlation computation. The most widely used techniques are the spectral whitening and temporal smoothing of the individual seismic traces. We here propose an additional pre-processing to be used together with the classical ones, which is based on the spatial analysis of the seismic wavefield. We compute the cross-spectra between all available stations pairs in spectral domain, leading to the data covariance matrix. We apply a one-bit normalization to the covariance matrix eigenspectrum before extracting the cross-correlations in the time domain. The efficiency of the method is shown with several numerical tests. We apply the method to the data collected by the USArray, when the M8.8 Maule earthquake occurred on 2010 February 27. The method shows a clear improvement compared with the classical equalization to attenuate the highly energetic and coherent waves incoming from the earthquake, and allows to perform reliable traveltime measurement even in the presence of the earthquake.

  7. Local Ambient Seismic Noise Survey in Dixie Valley, NV for Engineered Geothermal System Favorability Assessment

    Science.gov (United States)

    Tibuleac, I. M.; Iovenitti, J. L.; von Seggern, D. H.; Sainsbury, J.

    2013-12-01

    The primary objective of this study is to develop and test the seismic component of a calibrated exploration method that integrated geological, geophysical, and geochemical data to identify potential drilling targets for Engineered Geothermal Systems (EGS). In exploring for EGS sites, the selection criteria identified by the AltaRock Energy, Inc. (AltaRock) and University of Nevada, Reno teams are, in order of importance, (1) temperature greater than 200C at 1.5 km depth, (2) rock type at the depth of interest (porous rocks at 1-3 km); and (3) favorable stress regime (tensional environment). To improve spatial resolution, a dense seismic array (21 three-component, broadband sensors, with an overall array aperture of 45km) was installed in two deployments in Dixie Valley, NV, each deployment having a three-month duration Ambient seismic noise and signal were used to retrieve inter-station and same-station Green's Functions (GFs), to be used for subsurface imaging. We used ambient seismic noise interferometry to extract GFs from crosscorrelation of continuous records. An innovative aspect of the seismic work was estimating the receiver functions beneath the stations using noise auto-correlation which was used to image the substructure. We report results of applying the technique to estimate a P/S velocity model from the GF surface wave components and from the GF body-wave reflection component, retrieved from ambient noise and signal cross-correlation and auto-correlation beams. We interpret our results in terms of temperature, pressure and rock composition. The estimated seismic velocity model capability to infer temperature is statistically assessed, in combination with other geophysical technique results.

  8. Rayleigh Wave Tomography of Mid-Continent Rift (MCR) using Earthquake and Ambient Noise Data

    Science.gov (United States)

    Aleqabi, G. I.; Wiens, D.; Wysession, M. E.; Shen, W.; van der Lee, S.; Revenaugh, J.; Frederiksen, A. W.; Darbyshire, F. A.; Stein, S. A.; Jurdy, D. M.; Wolin, E.; Bollmann, T. A.

    2015-12-01

    The structure of the North American Mid-Continent Rift Zone (MCRZ) is examined using Rayleigh waves from teleseismic earthquakes and ambient seismic noise recorded by the Superior Province Rifting EarthScope Experiment (SPREE). Eighty-four broadband seismometers were deployed during 2011-2013 in Minnesota and Wisconsin, USA, and Ontario, CA, along three lines; two across the rift axis and the third along the rift axis. These stations, together with the EarthScope Transportable Array, provided excellent coverage of the MCRZ. The 1.1 Ga Mesoproterozoic failed rift consists of two arms, buried under post-rifting sedimentary formations that meet at Lake Superior. We compare two array-based tomography methods using teleseismic fundamental mode Rayleigh waves phase and amplitude measurements: the two-plane wave method (TPWM, Forsyth, 1998) and the automated surface wave phase velocity measuring system (ASWMS, Jin and Gaherty, 2015). Both array methods and the ambient noise method give relatively similar results showing low velocity zones extending along the MCRZ arms. The teleseismic Rayleigh wave results from 18 - 180 s period are combined with short period phase velocity results (period 8-30 s) obtained from ambient noise by cross correlation. Phase velocities from the methods are very similar at periods of 18-30 where results overlap; in this period range we use the average of the noise and teleseismic results. Finally the combined phase velocity curve is inverted using a Monte-Carlo inversion method at each geographic point in the model. The results show low velocities at shallow depths (5-10 km) that are the result of very deep sedimentary fill within the MCRZ. Deeper-seated low velocity regions may correspond to mafic underplating of the rift zone.

  9. Characterizing waveform uncertainty due to ambient noise for the Global Seismic Network

    Science.gov (United States)

    Guandique, J. A.; Burdick, S.; Lekic, V.

    2015-12-01

    Ambient seismic noise is the vibration present on seismograms not due by any earthquake or discrete source. It can be caused by trees swaying in the wind or trucks rumbling on the freeway, but the main source of noise is the microseism caused by ocean waves. The frequency content and amplitude of seismic noise varies due to weather, season, and the location of a station, among other factors. Because noise affects recordings of earthquake waveforms, better understanding it could improve the detection of small earthquakes, reduce false positives in earthquake early warning, and quantify uncertainty in waveform-based studies In this study, we used two years of 3-component accelerograms from stations in the GSN. We eliminate days with major earthquakes, aggregate analysis by month, and calculate the mean power spectrum for each component and the transfer function between components. For each power spectrum, we determine the dominant frequency and amplitude of the primary (PM) and secondary (SM) microseisms which appear at periods of ~14s and ~7s, as well as any other prominent peaks. The cross-component terms show that noise recorded on different components cannot be treated as independent. Trends in coherence and phase delay suggest directionality in the noise and information about in which modes it propagates. Preliminary results show that the noise on island stations exhibits less monthly variability, and its PM peaks tend to be much weaker than the SM peaks. The continental stations show much less consistent behavior, with higher variability in the PM peaks between stations and higher frequency content during winter months. Stations that are further inland have smaller SM peaks compared to coastal stations, which are more similar to island stations. Using these spectra and cross-component results, we develop a method for generating realistic 3-component seismic noise and covariance matrices, which can be used across various seismic applications.

  10. Music and ambient operating room noise in patients undergoing spinal anesthesia.

    Science.gov (United States)

    Ayoub, Chakib M; Rizk, Laudi B; Yaacoub, Chadi I; Gaal, Dorothy; Kain, Zeev N

    2005-05-01

    Previous studies have indicated that music decreases intraoperative sedative requirements in patients undergoing surgical procedures under regional anesthesia. In this study we sought to determine whether this decrease in sedative requirements results from music or from eliminating operating room (OR) noise. A secondary aim of the study was to examine the relationship of response to intraoperative music and participants' culture (i.e., American versus Lebanese). Eighty adults (36 American and 54 Lebanese) undergoing urological procedures with spinal anesthesia and patient-controlled IV propofol sedation were randomly assigned to intraoperative music, white noise, or OR noise. We found that, controlling for ambient OR noise, intraoperative music decreases propofol requirements (0.004 +/- 0.002 mg . kg(-1) . min(-1) versus 0.014 +/- 0.004 mg . kg(-1) . min(-1) versus 0.012 +/- 0.002 mg . kg(-1) . min(-1); P = 0.026). We also found that, regardless of group assignment, Lebanese patients used less propofol as compared with American patients (0.005 +/- 0.001 mg . kg(-1) . min(-1) versus 0.017 +/- 0.003 mg . kg(-1) . min(-1); P = 0.001) and that, in both sites, patients in the music group required less propofol (P noise, intraoperative music decreases propofol requirements of both Lebanese and American patients who undergo urological surgery under spinal anesthesia.

  11. Effect of season and meteorological conditions on community noise annoyance

    NARCIS (Netherlands)

    Miedema, H.M.E.; Fields, J.M.; Vos, H.

    2005-01-01

    More than 80 000 residents' responses to transportation noise from 42 studies conducted at different times of year provide statistical estimates of the effects of season and meteorological conditions on community response to noise. The strongest evidence for a seasonal effect comes from 7 years of c

  12. The preliminary results: Seismic ambient noise Rayleigh wave tomography around Merapi volcano, central Java, Indonesia

    Energy Technology Data Exchange (ETDEWEB)

    Trichandi, Rahmantara, E-mail: rachmantara.tri@gmail.com [Geophysical Engineering, Faculty of Mining and Petroleum Engineering, Institut Teknologi Bandung, 40132, Bandung (Indonesia); Yudistira, Tedi; Nugraha, Andri Dian [Global Geophysics Research Group, Faculty of Mining and Petroleum Engineering, Institut Teknologi Bandung, Bandung, 40132 (Indonesia); Zulhan, Zulfakriza [Earth Science Graduate Program, Faculty of Earth Science and Technology, Institut Teknologi Bandung, Bandung, 40132 (Indonesia); Saygin, Erdinc [Research School of Earth Sciences, The Australian National University, Canberra ACT 0200 (Australia)

    2015-04-24

    Ambient noise tomography is relatively a new method for imaging the shallow structure of the Earth subsurface. We presents the application of this method to produce a Rayleigh wave group velocity maps around the Merapi Volcano, Central Java. Rayleigh waves group velocity maps were reconstructed from the cross-correlation of ambient noise recorded by the DOMERAPI array which consists 43 broadband seismometers. In the processing stage, we first filtered the observation data to separatethe noise from the signal that dominated by the strong volcanic activities. Next, we cross-correlate the filtered data and stack to obtain the Green’s function for all possible station pairs. Then we carefully picked the peak of each Green’s function to estimate the dispersion trend and appliedMultiple Filter Technique to obtain the dispersion curve. Inter-station group velocity curvesare inverted to produceRayleigh wave group velocity maps for periods 1 to 10 s. The resulted Rayleigh group velocity maps show the interesting features around the Merapi Volcano which generally agree with the previous studies. Merapi-Lawu Anomaly (MLA) is emerged as a relatively low anomaly in our group velocity maps.

  13. The preliminary results: Seismic ambient noise Rayleigh wave tomography around Merapi volcano, central Java, Indonesia

    Science.gov (United States)

    Trichandi, Rahmantara; Yudistira, Tedi; Nugraha, Andri Dian; Zulhan, Zulfakriza; Saygin, Erdinc

    2015-04-01

    Ambient noise tomography is relatively a new method for imaging the shallow structure of the Earth subsurface. We presents the application of this method to produce a Rayleigh wave group velocity maps around the Merapi Volcano, Central Java. Rayleigh waves group velocity maps were reconstructed from the cross-correlation of ambient noise recorded by the DOMERAPI array which consists 43 broadband seismometers. In the processing stage, we first filtered the observation data to separatethe noise from the signal that dominated by the strong volcanic activities. Next, we cross-correlate the filtered data and stack to obtain the Green's function for all possible station pairs. Then we carefully picked the peak of each Green's function to estimate the dispersion trend and appliedMultiple Filter Technique to obtain the dispersion curve. Inter-station group velocity curvesare inverted to produceRayleigh wave group velocity maps for periods 1 to 10 s. The resulted Rayleigh group velocity maps show the interesting features around the Merapi Volcano which generally agree with the previous studies. Merapi-Lawu Anomaly (MLA) is emerged as a relatively low anomaly in our group velocity maps.

  14. Ambient seismic noise monitoring of a clay landslide: Toward failure prediction

    Science.gov (United States)

    Mainsant, Guénolé; Larose, Eric; Brönnimann, Cornelia; Jongmans, Denis; Michoud, Clément; Jaboyedoff, Michel

    2012-03-01

    Given that clay-rich landslides may become mobilized, leading to rapid mass movements (earthflows and debris flows), they pose critical problems in risk management worldwide. The most widely proposed mechanism leading to such flow-like movements is the increase in water pore pressure in the sliding mass, generating partial or complete liquefaction. This solid-to-liquid transition results in a dramatic reduction of mechanical rigidity in the liquefied zones, which could be detected by monitoring shear wave velocity variations. With this purpose in mind, the ambient seismic noise correlation technique has been applied to measure the variation in the seismic surface wave velocity in the Pont Bourquin landslide (Swiss Alps). This small but active composite earthslide-earthflow was equipped with continuously recording seismic sensors during spring and summer 2010. An earthslide of a few thousand cubic meters was triggered in mid-August 2010, after a rainy period. This article shows that the seismic velocity of the sliding material, measured from daily noise correlograms, decreased continuously and rapidly for several days prior to the catastrophic event. From a spectral analysis of the velocity decrease, it was possible to determine the location of the change at the base of the sliding layer. These results demonstrate that ambient seismic noise can be used to detect rigidity variations before failure and could potentially be used to predict landslides.

  15. Surface Wave Tomography of South China Sea from Ambient Seismic Noise and Two-station Measurements

    Science.gov (United States)

    Liang, W.-T.; Gung, Y.-C.

    2012-04-01

    We have taken the cross-correlation of seismic ambient noise technique as well as the two-station method to analyze the velocity structure in the South China Sea region. The dataset used in this study includes broadband waveforms recorded at the Taiwan BATS (Broadband Array in Taiwan for Seismology), Japan OHP (Ocean Hemisphere Project), Malaysia and Vietnam seismic networks. We remove the instrument response from daily data and filter the waveform with various frequency bands according to the length of each station-pair. Then we apply the commonly used 1-bit normalization to minimize the effect of earthquakes, instrumental irregularities, and non-stationary noise sources near to the stations. With the derived daily cross correlation function (CCF), we are able to examine the timing quality for each station-pair. We then obtain the surface Rayleigh wave dispersion curves from the stacked CCF for each station-pair. To cover the longer period band in the dispersion curves, we adopt the two-station method to compute both the group and phase velocities of surface waves. A new surface wave tomography based on ambient seismic noise study and traditional two-station technique has been achieved in this study. Raypaths that travel through the Central basin present higher velocity, which is in agreement with the idea of thin crust. On the other hand, the slower velocity between Taiwan and Northern Luzon, Philippine is mainly due to a thick accretionary prism above the Manila trench.

  16. Monitoring the tidal response of a sea levee with ambient seismic noise

    Science.gov (United States)

    Planès, Thomas; Rittgers, Justin B.; Mooney, Michael A.; Kanning, Wim; Draganov, Deyan

    2017-03-01

    Internal erosion, a major cause of failure of earthen dams and levees, is often difficult to detect at early stages using traditional visual inspection. The passive seismic-interferometry technique could enable the early detection of internal changes taking place within these structures. We test this technique on a portion of the sea levee of Colijnsplaat, Netherlands, which presents signs of concentrated seepage in the form of sandboils. Applying seismic interferometry to ambient noise collected over a 12-hour period, we retrieve surface waves propagating along the levee. We identify the contribution of two dominant ambient seismic noise sources: the traffic on the Zeeland bridge and a nearby wind turbine. Here, the sea-wave action does not constitute a suitable noise source for seismic interferometry. Using the retrieved surface waves, we compute time-lapse variations of the surface-wave group velocities during the 12-hour tidal cycle for different frequency bands, i.e., for different depth ranges. The estimated group-velocity variations correlate with variations in on-site pore-water pressure measurements that respond to tidal loading. We present lateral profiles of these group-velocity variations along a 180-meter section of the levee, at four different depth ranges (0m-40m). On these profiles, we observe some spatially localized relative group-velocity variations of up to 5% that might be related to concentrated seepage.

  17. Shear-wave velocity of marine sediments offshore Taiwan using ambient seismic noise

    Science.gov (United States)

    Lin, Yu-Tse; Lin, Jing-Yi; Kuo-Chen, Hao; Yeh, Yi-Chin; Cheng, Win-Bin

    2017-04-01

    Seismic ambient noise technology has many advantages over the traditional two-station method. The most important one is that noise is happening all the time and it can be widely and evenly distributed. Thus, the Green's Function of any station pair can be obtained through the data cross-correlation process. Many related studies have been performed to estimate the velocity structures based on the inland area. Only a few studies were reported for the marine area due to the relatively shorter recording time of ocean bottom seismometers (OBS) deployment and the high cost of the marine experiment. However, the understanding about the shear-wave velocity (Vs) of the marine sediments is very crucial for the hazard assessment related to submarine landslides, particularly with the growing of submarine resources exploration. In this study, we applied the ambient noise technique to four OBS seismic networks located offshore Taiwan in the aim of getting more information about the noise sources and having the preliminary estimation for the Vs of the marine sediments. Two of the seismic networks were deployed in the NE part of Taiwan, near the Ryukyu subduction system, whereas the others were in the SW area, on the continental margin rich in gas hydrate. Generally, ambient seismic noise could be associated with wind, ocean waves, rock fracturing and anthropogenic activity. In the southwestern Taiwan, the cross-correlation function obtained from two seismic networks indicate similar direction, suggestion that the source from the south part of the network could be the origin of the noise. However, the two networks in the northeastern Taiwan show various source direction, which could be caused by the abrupt change of bathymetry or the volcanic degassing effect frequently observed by the marine geophysical method in the area. The Vs determined from the dispersion curve shows a relatively higher value for the networks in the Okinawa Trough (OT) off NE Taiwan than that in the

  18. [Ambient noise comparison in 2 intensive care units in a tertiary care center].

    Science.gov (United States)

    Ornelas-Aguirre, José Manuel; Zárate-Coronado, Olivia; Gaxiola-González, Fabiola; Neyoy-Sombra, Venigna

    2017-04-03

    The World Health Organization has established a maximum noise level of 40 decibels (dB) for an intensive care unit. The aim of this study was to compare the noise level in 2 different intensive care units at a tertiary care center. In an cross-sectional design, the maximum noise level was analyzed within the intensive coronary care unit and intensive care unit with a digital meter. A measurement in 4 different points of each room with 5minute intervals for a period of 60minutes were performed at 7:30, 14:30 and 20:30. Average of the observations were compared with descriptive statistics and Mann-Whitney U. An analysis with Kruskal-Wallis test was performed to average noise. The noise observed in the intensive care unit had an average of 64.77±3.33dB (P=.08); something analogous happened in the coronary intensive care room with an average of 60.20±1.58dB (P=.129). 25% or more of the measurements exceeded up to 20 points the level recommended by the World Health Organization. Noise levels in intensive care wards that were studied exceed the maximum recommended level for a hospital. It is necessary to design and implement actions for greater participation of health personnel in the reduction of ambient noise. Copyright © 2017 Instituto Nacional de Cardiología Ignacio Chávez. Publicado por Masson Doyma México S.A. All rights reserved.

  19. Tracking velocity changes from ambient noise and repeating airgun shots in Tenerife

    Science.gov (United States)

    Volk, M. F.; Bean, C. J.; Lokmer, I.; Perez, N. M.; Ibanez, J. M.

    2015-12-01

    Green's functions can be recovered through the cross correlation of ambient seismic noise. These Green's functions can be used to image the subsurface or for monitoring geological settings where we expect rapid seismic velocity changes (e.g. volcanoes, reservoirs). The criterion for the successful recovery of the Green's functions is that the wavefields used for the cross correlation are diffuse. This assumption is fulfilled if either the noise sources are uniformly distributed around the receivers or the scattering in the medium is high enough to mitigate any source directivity. The locations of the noise sources are usually unknown and they change with time. Therefore, apparent changes in seismic wave velocity can be observed which are caused by temporal and spatial changes in the noise source location.In order to investigate these apparent changes in the Green's functions we undertook an experiment in Tenerife. The experiment was running for 3 months. A small airgun, with exactly known source position, was used as an active source. It was shooting every 15 minutes and several seismic stations laterally and vertically distributed around the airgun recorded the active shots. Coincident to the active shots seismic noise was recorded. Therefore apparent velocity changes measured through the cross correlation of noise can be compared to velocity changes recovered from the repetitive shots. This gives us the opportunity to distinguish between apparent changes due to changes in the noise sources and real velocity changes in the medium. In addition barometric pressure, temperature, rain fall and humidity were recorded in order to avoid misinterpretation of the velocity changes caused by weather fluctuations.

  20. Frequency Content of Ambient Seismic Noise in North-Central Illinois

    Science.gov (United States)

    Higuera-Diaz, I. C.; Carpenter, P. J.

    2004-12-01

    High and low-frequency ground motion vibration measurements were made in DeKalb and Kane Counties, Illinois, to characterize different sources of seismic noise and determine directions and magnitude of motion produced by each source. The Seismic Analysis Code 2000 (SAC2000) was used to process seismic noise data recorded with a low-frequency digital system,, earthquake records downloaded from the WILBER Web site, and noise data recorded by an engineering seismograph with high-frequency geophones. Power-spectral density estimates were computed from an autocorrelation series in most cases. Using the power density spectra routine of SAC2000, selecting autocorrelation windows of 20 s for the low-frequency data and 2 s for the high-frequency data, we have found distinctive seismic noise peaks among the different sites, regardless of the background noise level. The earthquake low-frequency data showed a microseism peak at a frequency of 0.2 Hz for stations located in the Midwestern U.S. Microseism peak frequency did not decrease with increasing distance from Lake Michigan, suggesting the lake is not the primary source of the microseisms, which may be generated in ocean basins. Ambient ground motion recorded by the Northern Illinois University seismic station with a 2 Hz natural period seismometer exhibited peaks around 0.8 and 2.2 Hz. Ground motion from trains, traffic, air-conditioning units and water pumping equipment was recorded with an engineering seismograph. Vertical geophones of natural frequency 2, 8, and 50 Hz were used, as well as a 4.5 Hz horizontal geophone. Train noise exhibits strong peaks in the 5-10 Hz range, both for the vertical and horizontal geophones. Noise peaks at 25, 60, 90 and 115 Hz are probably related to traffic, electrical transformers, and air-conditioning units. Measurements made near a sewage treatment plant in DeKalb showed peaks at 10, 30, 93, and 109 Hz, probably related to pumping and mechanical equipment. Seismic noise collected

  1. The Effect of Monomolecular Films on the Underlying Ambient-Noise Field

    Science.gov (United States)

    1988-11-01

    series of sea tests have been successfully conducted throughout a wide range of sea states. The basic format of each test was to deploy a pair of...cannot be solely responsible since ambient-noise levels increase rapidly from sea state 0 to sea state 2 in the absence of whitecap formation . While...beginning at a mean speed of 7.5 meters per second. He states, "The water surface, as seen from beneath, looks like a ceiling of a stalactite grotto. As

  2. Nonlinear Dynamics of an Ambient Noise Driven Array of Coupled Graphene Nanostructured Devices for Energy Harvesting

    Directory of Open Access Journals (Sweden)

    El Aroudi A.

    2014-01-01

    Full Text Available Nonlinearities have been shown to play an important role in increasing the extracted energy of energy harvesting devices at the macro and micro scales. Vibration-based energy harvesting on the nano scale has also received attention. In this paper, we characterize the nonlinear dynamical behavior of an array of three coupled strained nanostructured graphene for its potential use in energy harvesting applications. The array is formed by three compressed vibrating membrane graphene sheet subject to external vibrational noise excitation. We present the continuous time dynamical model of the system in the form of a double-well three degree of freedom system. Random vibrations are considered as the main ambient energy source for the system and its performances in terms of the probability density function, RMS or amplitude value of the position, FFT spectra and state plane trajectories are presented in the steady state non-equilibrium regime when the noise level is considered as a control parameter.

  3. Effects of Processing and Ambient Noise Distribution on Seismic Interferometry using Auto-Correlation Stacks

    Science.gov (United States)

    Nowack, R. L.; Oren, C.

    2016-12-01

    The influence of processing and ambient noise distribution on seismic interferometry using auto-correlation stacks is investigated. We first study the effects of automatic gain control (AGC) and spectral whitening on the daily and monthly auto-correlation stacks. It was found that although the AGC equalizes the amplitudes over longer time lag windows, it does not dramatically affect the results over time lag windows shorter than the AGC window applied. The effects of spectral whitening are more pronounced where the daily and monthly auto-correlation stacks for the PmP window become less coherent when spectral whitening is not applied. The influence of band-pass filtering is next investigated, where the results are robust to the effects of the high cut filter applied from 0.55 to 0.85 Hz. However, the results are less robust if the low-cut filter is set lower than about 0.3 Hz. Similar to not applying spectral whitening, this could result from lower frequency microseisms contaminating the body waves on the auto-correlation stacks. Synthetic modeling was then performed to investigate the effects of the ambient noise distribution on the auto-correlation stacks. For sources along the top boundary, it was found that the zone of stationary phase of the auto-correlation stacks was very localized to energy coming from nearby the receiver with energy from sources at greater distances destructively interfering. For noise energy arriving from below the model, such as far from regional and teleseismic sources, it was found that the angular zone of stationary phase was much broader. Assuming that the time duration for the temporal stacking is sufficient to allow for a smoothly varying range of incident arriving noise energy, then a broad region of stationary phase could explain the observation of both PmP and SmS phases on the auto-correlation stacks.

  4. Imaging Subsurface Structure of Central Zagros Zone/Iran Using Ambient Noise Tomography

    Science.gov (United States)

    Vahidravesh, Shaghayegh; Pakzad, Mehrdad, ,, Dr.; Hatami, Mohammad Reza, ,, Dr.

    2017-04-01

    The Central Zagros zone, of west Iran & east Iraq, is surrounded by many active faults (including Main Zagros Reversed Fault, Main Recent Fault, High Zagros Fault, Zagros Fold, & Thrust Belt). Recent studies show that cross-correlation of a long-term ambient seismic noise data recorded in station-pair, includes important information regarding empirical Green's functions (EGFs) between stations. Hence, ambient seismic noise carries valuable information of the wave propagation path (which can be extracted). The 2D model of surface waves (Rayleigh & Love) velocities for the studied area is obtained by seismic ambient noise tomography (ANT) method. Throughout this research, we use continuous records of all three vertical, radial, and tangential components (obtained by rotation) recorded by IRSC (Iranian Seismological Center) and IIEES (International Institute of Earthquake Engineering) networks for this area of interest. The IRSC & IIEES networks are equipped by SS-1 kinematics and Guralp CMG-3T sensors respectively. Data of 20 stations were used for 12 months from 2014/Nov. to 2015/Nov. The performed data processing is similar to the one, put into words in detail by Bensen et al. (2007) including the processed daily base data. Mean, trend, and instrument response were removed and the data were decimated to 5 sps (sample per second) to reduce the amount of storage space and computational time required. We then applied merge to handle data gaps. One-bit time-domain normalization was also applied to suppress the influence of instrument irregularities and earthquake signals followed by spectral (frequency-domain) normalization between 0.05-0.2 Hz (period 5-20 sec). After cross-correlation (processing step), we perform rms stacking (new approach of stacking) to stack many cross-correlation functions based on the highest energy in a time interval which we accordingly anticipate to receive Rayleigh & Love waves fundamental modes. To evaluate quality of the stacking process

  5. Documenting and Assessing Dolphin Calls and Ambient and Anthropogenic Noise Levels via PAM and a SPL Meter.

    Science.gov (United States)

    Dudzinski, Kathleen M; Melillo-Sweeting, Kelly; Gregg, Justin D

    2016-01-01

    Song Meter SM2M marine recorders were deployed to document dolphin calls and ambient and anthropogenic noise. Recordings from Bimini were split into 2-h segments; no segment was without dolphin calls. At Dolphin Encounters, average noise levels ranged from 110 to 125 dB; the highest source level was 147.98 dB re 1 μPa at 1 m. Average ambient-noise levels documented at 4 sites in Guam were below 118 dB re 1 μPa at 1 m. These data were compared with values from a custom-built sound pressure level (SPL) meter and confirm that the SM2M recorder is a useful tool for assessing animal calls and ambient and anthropogenic noise levels.

  6. New developments in ambient noise analysis to characterise the seismic response of landslide prone slopes

    Directory of Open Access Journals (Sweden)

    V. Del Gaudio

    2013-04-01

    Full Text Available We report on new developments in the application of ambient noise analysis applied to investigate the dynamic response of landslide prone slopes to seismic shaking with special attention to the directional resonance phenomena recognised in previous studies. Investigations relying on the calculation of horizontal-to-vertical noise spectral ratio (HVNR were carried out in the area of Caramanico Terme (central Italy where an ongoing accelerometer monitoring on slopes with different characteristics offers the possibility of validation of HVNR analysis. The noise measurements, carried out in different times to test the result repeatability, revealed that sites affected by response directivity persistently show major peaks with a common orientation consistent with the resonance direction inferred from accelerometer data. At sites where directivity is absent, the HVNR peaks do not generally show a preferential orientation, with rare exceptions that could be linked to the presence of temporarily active sources of polarised noise. The observed spectral ratio amplitude variations can be related to temporal changes in site conditions, which can hinder the recognition of main resonance frequencies. Therefore, it is recommended to conduct simultaneous measurements at nearby sites within the same study area and to repeat measurements at different times in order to distinguish significant systematic polarisation caused by site specific response directivity from polarisation controlled by properties of noise sources. Furthermore, an analysis of persistence in noise recordings of signals with systematic directivity showed that only a~portion of recordings contains wave trains having a clear polarisation representative of site directional resonance. Thus a careful selection of signals for HVNR analysis is needed for a correct characterisation of site directional properties.

  7. Ambient noise tomography with non-uniform noise sources and low aperture networks: case study of deep geothermal reservoirs in northern Alsace, France

    Science.gov (United States)

    Lehujeur, Maximilien; Vergne, Jérôme; Maggi, Alessia; Schmittbuhl, Jean

    2017-01-01

    We developed and applied a method for ambient noise surface wave tomography that can deal with noise cross-correlation functions governed to first order by a non-uniform distribution of the ambient seismic noise sources. The method inverts the azimuthal distribution of noise sources that are assumed to be far from the network, together with the spatial variations of the phase and group velocities on an optimized irregular grid. Direct modelling of the two-sided noise correlation functions avoids dispersion curve picking on every station pair and minimizes analyst intervention. The method involves station pairs spaced by distances down to a fraction of a wavelength, thereby bringing additional information for tomography. After validating the method on synthetic data, we applied it to a set of long-term continuous waveforms acquired around the geothermal sites at Soultz-sous-Forêts and Rittershoffen (Northern Alsace, France). For networks with limited aperture, we show that taking the azimuthal variations of the noise energy into account has significant impact on the surface wave dispersion maps. We obtained regional phase and group velocity models in the 1-7 s period range, which is sensitive to the structures encompassing the geothermal reservoirs. The ambient noise in our dataset originates from two main directions, the northern Atlantic Ocean and the Mediterranean Sea, and is dominated by the first Rayleigh wave overtone in the 2-5 s period range.

  8. Ambient noise tomography with non-uniform noise sources and low aperture networks: case study of deep geothermal reservoirs in northern Alsace, France

    Science.gov (United States)

    Lehujeur, Maximilien; Vergne, Jérôme; Maggi, Alessia; Schmittbuhl, Jean

    2016-10-01

    We developed and applied a method for ambient noise surface wave tomography that can deal with noise cross-correlation functions governed to first order by a non-uniform distribution of the ambient seismic noise sources. The method inverts the azimuthal distribution of noise sources that are assumed to be far from the network, together with the spatial variations of the phase and group velocities on an optimized irregular grid. Direct modeling of the two-sided noise correlation functions avoids dispersion curve picking on every station pair and minimizes analyst intervention. The method involves station pairs spaced by distances down to a fraction of a wavelength, thereby bringing additional information for tomography. After validating the method on synthetic data, we applied it to a set of long-term continuous waveforms acquired around the geothermal sites at Soultz-sous-Forêts and Rittershoffen (Northern Alsace, France). For networks with limited aperture, we show that taking the azimuthal variations of the noise energy into account has significant impact on the surface wave dispersion maps. We obtained regional phase and group velocity models in the 1-7 s period range, which is sensitive to the structures encompassing the geothermal reservoirs. The ambient noise in our dataset originates from two main directions, the northern Atlantic Ocean and the Mediterranean Sea, and is dominated by the first Rayleigh wave overtone in the 2 - 5 s period range.

  9. Upper crustal structures beneath Yogyakarta imaged by ambient seismic noise tomography

    Science.gov (United States)

    Zulfakriza, Saygin, E.; Cummins, P.; Widiyantoro, S.; Nugraha, Andri Dian

    2013-09-01

    Delineating the upper crustal structures beneath Yogyakarta is necessary for understanding its tectonic setting. The presence of Mt. Merapi, fault line and the alluvial deposits contributes to the complex geology of Yogyakarta. Recently, ambient seismic noise tomography can be used to image the subsurface structure. The cross correlations of ambient seismic noise of pair stations were applied to extract the Green's function. The total of 27 stations from 134 seismic stations available in MERapi Amphibious EXperiment (MERAMEX) covering Yogyakarta region were selected to conduct cross correlation. More than 500 Rayleigh waves of Green's functions could be extracted by cross-correlating available the station pairs of short-period and broad-band seismometers. The group velocities were obtained by filtering the extracted Green's function between 0.5 and 20 s. 2-D inversion was applied to the retrieved travel times. Features in the derived tomographic images correlate with the surface geology of Yogyakarta. The Merapi active volcanoes and alluvial deposit in Yogyakarta are clearly described by lower group velocities. The high velocity anomaly contrasts which are visible in the images obtained from the period range between 1 and 5 s, correspond to subsurface imprints of fault that could be the Opak Fault.

  10. Deriving Deep Ocean Temperature Changes From the Ambient Acoustic Noise Field

    Science.gov (United States)

    Sambell, K.; Evers, L. G.; Snellen, M.

    2016-12-01

    Passively deriving the deep ocean temperature is a challenge. However, knowledge about changes in the deep ocean temperature are important in relation to climate change. In-situ observations are are and satellite observations are hardly applicable. Low-frequency sound waves of a few hertz can penetrate the deep oceans over long distances. As their propagation is temperature dependent, these waves contain valuable information that can be used for temperature monitoring. In this study, the use of interferometry is demonstrated by applying this technique to ambient noise measured at two hydrophone arrays located near Robinson Crusoe Island in the South Pacific Ocean. The arrays are separated by 40 km and are located at a depth of 800 m. Both arrays consist of three hydrophones with an interstation distance of 2 km. It is shown that the acoustic velocity, and with this the temperature variation, can be derived from measured hydro-acoustic data. Furthermore, the findings are supported by ocean models that describe the propagation of sound between the hydrophone arrays. This study shows the potential of using the ambient noise field for temperature monitoring in the deep ocean.

  11. Ambient Seismic Noise Tomography of a Loess High Bank at Dunaszekcső (Hungary)

    Science.gov (United States)

    Szanyi, Gyöngyvér; Gráczer, Zoltán; Győri, Erzsébet; Kaláb, Zdeněk; Lednická, Markéta

    2016-08-01

    Loess high banks along the right side of the Danube in Hungary are potential subjects of landslides. Small scale ambient seismic noise tomography was used at the Dunaszekcső high bank. The aim of the study was to map near surface velocity anomalies since we assume that the formation of tension cracks—which precede landslides—are represented by low velocities. Mapping Rayleigh wave group velocity distribution can help to image intact and creviced areas and identify the most vulnerable sections. The study area lies at the top of the Castle Hill of Dunaszekcső, which was named after Castellum Lugio, a fortress of Roman origin. The presently active head scarp was formed in April 2011, and our study area was chosen to be at its surroundings. Cross-correlation functions of ambient noise recordings were used to retrieve the dispersion curves, which served as the input of the group velocity tomography. Phase cross-correlation and time-frequency phase weighted stacking was applied to calculate the cross-correlation functions. The average Rayleigh wave group velocity at the loess high bank was found to be 171 ms^{-1}. The group velocity map at a 0.1 s period revealed a low-velocity region, whose location coincides with a highly creviced area, where slope failure takes place along a several meter wide territory. Another low velocity region was found, which might indicate a previously unknown loosened domain. The highest velocities were observed at the supposed remnants of Castellum Lugio.

  12. 3-D crustal and uppermost mantle structure beneath NE China revealed by ambient noise adjoint tomography

    Science.gov (United States)

    Liu, Yaning; Niu, Fenglin; Chen, Min; Yang, Wencai

    2017-03-01

    We construct a new 3-D shear wave speed model of the crust and the uppermost mantle beneath Northeast China using the ambient noise adjoint tomography method. Without intermediate steps of measuring phase dispersion, the adjoint tomography inverts for shear wave speeds of the crust and uppermost mantle directly from 6-40 s waveforms of Empirical Green's functions (EGFs) of Rayleigh waves, which are derived from interferometry of two years of ambient noise data recorded by the 127 Northeast China Extended Seismic Array stations. With an initial 3-D model derived from traditional asymptotic surface wave tomography method, adjoint tomography refines the 3-D model by iteratively minimizing the frequency-dependent traveltime misfits between EGFs and synthetic Green's functions measured in four period bands: 6-15 s, 10-20 s, 15-30 s, and 20-40 s. Our new model shows shear wave speed anomalies that are spatially correlated with known tectonic units such as the Great Xing'an range and the Changbaishan mountain range. The new model also reveals low wave speed conduits in the mid-lower crust and the uppermost mantle with a wave speed reduction indicative of partial melting beneath the Halaha, Xilinhot-Abaga, and Jingpohu volcanic complexes, suggesting that the Cenozoic volcanism in the area has a deep origin. Overall, the adjoint tomographic images show more vertically continuous velocity anomalies with larger amplitudes due to the consideration of the finite frequency and 3-D effects.

  13. Correction of phase velocity bias caused by strong directional noise sources in high-frequency ambient noise tomography: a case study in Karamay, China

    Science.gov (United States)

    Wang, K.; Luo, Y.; Yang, Y.

    2016-12-01

    We collect two months of ambient noise data recorded by 35 broadband seismic stations in a 9×11 km area near Karamay, China, and do cross-correlation of noise data between all station pairs. Array beamforming analysis of the ambient noise data shows that ambient noise sources are unevenly distributed and the most energetic ambient noise mainly comes from azimuths of 40o-70o. As a consequence of the strong directional noise sources, surface wave waveforms of the cross-correlations at 1-5 Hz show clearly azimuthal dependence, and direct dispersion measurements from cross-correlations are strongly biased by the dominant noise energy. This bias renders that the dispersion measurements from cross-correlations do not accurately reflect the interstation velocities of surface waves propagating directly from one station to the other, that is, the cross-correlation functions do not retrieve Empirical Green's Functions accurately. To correct the bias caused by unevenly distributed noise sources, we adopt an iterative inversion procedure. The iterative inversion procedure, based on plane-wave modeling, includes three steps: (1) surface wave tomography, (2) estimation of ambient noise energy and (3) phase velocities correction. First, we use synthesized data to test efficiency and stability of the iterative procedure for both homogeneous and heterogeneous media. The testing results show that: (1) the amplitudes of phase velocity bias caused by directional noise sources are significant, reaching 2% and 10% for homogeneous and heterogeneous media, respectively; (2) phase velocity bias can be corrected by the iterative inversion procedure and the convergences of inversion depend on the starting phase velocity map and the complexity of the media. By applying the iterative approach to the real data in Karamay, we further show that phase velocity maps converge after ten iterations and the phase velocity map based on corrected interstation dispersion measurements are more consistent

  14. Correction of phase velocity bias caused by strong directional noise sources in high-frequency ambient noise tomography: a case study in Karamay, China

    Science.gov (United States)

    Wang, Kai; Luo, Yinhe; Yang, Yingjie

    2016-05-01

    We collect two months of ambient noise data recorded by 35 broad-band seismic stations in a 9 × 11 km area (1-3 km station interval) near Karamay, China, and do cross-correlation of noise data between all station pairs. Array beamforming analysis of the ambient noise data shows that ambient noise sources are unevenly distributed and the most energetic ambient noise mainly comes from azimuths of 40°-70°. As a consequence of the strong directional noise sources, surface wave components of the cross-correlations at 1-5 Hz show clearly azimuthal dependence, and direct dispersion measurements from cross-correlations are strongly biased by the dominant noise energy. This bias renders that the dispersion measurements from cross-correlations do not accurately reflect the interstation velocities of surface waves propagating directly from one station to the other, that is, the cross-correlation functions do not retrieve empirical Green's functions accurately. To correct the bias caused by unevenly distributed noise sources, we adopt an iterative inversion procedure. The iterative inversion procedure, based on plane-wave modeling, includes three steps: (1) surface wave tomography, (2) estimation of ambient noise energy and biases and (3) phase velocities correction. First, we use synthesized data to test the efficiency and stability of the iterative procedure for both homogeneous and heterogeneous media. The testing results show that: (1) the amplitudes of phase velocity bias caused by directional noise sources are significant, reaching ˜2 and ˜10 per cent for homogeneous and heterogeneous media, respectively; (2) phase velocity bias can be corrected by the iterative inversion procedure and the convergence of inversion depends on the starting phase velocity map and the complexity of the media. By applying the iterative approach to the real data in Karamay, we further show that phase velocity maps converge after 10 iterations and the phase velocity maps obtained using

  15. Ice berg cracking events as identified from underwater ambient noise measurements in the shallow waters of Ny-Alesund, Arctic

    Science.gov (United States)

    Ashokan, M.; Latha, G.; Thirunavukkarasu, A.; Raguraman, G.; Venkatesan, R.

    2016-06-01

    This paper presents the work carried out on the analysis of preliminary underwater ambient noise measurements in the shallow waters of Kongsfjorden fjord, Arctic in the summer season, in which the ice berg cracking noise is identified. In the summer period, the melting of ice cover is fast and hence the ice bergs are free to move and float in the ocean. Underwater ambient noise has been acquired in the Kongsfjorden fjord, Arctic sea on 19th July 2015 at 5 m water depth, where the ocean depth is 50 m. Due to the tensile cracks at the surface of the sea ice by thermal expansion, ice berg calving and bobbing occurred near the experiment site. Analysis of power spectra shows that ice berg calving noise falls in the frequency band 100 Hz-500 Hz and the ice berg bobbing noise falls in the frequency band 200 Hz-400 Hz.

  16. Effects of noise from non-traffic-related ambient sources on sleep: Review of the literature of 1990-2010

    Directory of Open Access Journals (Sweden)

    Sarah Omlin

    2011-01-01

    Full Text Available This article reviews the literature about the effects of specific non-traffic-related ambient noise sources on sleep that appeared in the last two decades. Although everybody is faced with noise of non-traffic and non-industry origin (e.g. sounds made by neighbors, talk, laughter, music, slamming doors, structural equipment, ventilation, heat pumps, noise from animals, barking dogs, outdoor events etc., little scientific knowledge exists about its effects on sleep. The findings of the present extensive literature search and review are as follows: Only a small number of surveys, laboratory and field studies about mainly neighborhood, leisure and animal noise have been carried out. Most of them indicate that ambient noise has some effect on human sleep. However, a quantitative meta-analysis and comparison is not possible due to the small number of studies available and at times large differences in quality.

  17. Synthetic Parameter Tests for Ambient Noise Tomography in the Vienna Basin

    Science.gov (United States)

    Lloyd, S. M.; Bokelmann, G. H.

    2012-12-01

    Ambient noise tomography has been applied worldwide to study the crust and uppermost mantle of the Earth. Phase velocities along the path connecting two stations are obtained from crosscorrelating the signals recorded at these stations at different periods. These periods typically lie within the second microseismic band between about 4 and 10 seconds, because a lot of noise is generated from ocean waves hitting the coast or interacting with the ocean floor at these periods. However, while it is preferable to work with these periods it is not always possible when interstation distances are too small (less than ~100 km). In such settings shorter periods need to be used for processing. Moreover, targeting shallow crustal structure also requires using periods shorter than 4 seconds, as longer period waves are not very sensitive to these depth ranges. We study the resolvability of crustal structure in the Vienna Basin area using ambient noise tomography. To that end we investigate the effects of crustal velocities on phase velocity sensitivity kernels and synthetic waveforms using crustal models and station distances which are representative of the Vienna Basin. Due to the lateral extent of the basin area as well as the currently available data from seismic stations we use distances ranging from 20 to 100 km, and periods from 0.5 to 3 seconds for our synthetic tests. Our aim is to establish what periods can be used for particular velocity structures and station distances, and later apply these to real data recorded at stations in or around the Vienna Basin.

  18. Under-ice ambient noise in Eastern Beaufort Sea, Canadian Arctic, and its relation to environmental forcing.

    Science.gov (United States)

    Kinda, G Bazile; Simard, Yvan; Gervaise, Cédric; Mars, Jérome I; Fortier, Louis

    2013-07-01

    This paper analyzes an 8-month time series (November 2005 to June 2006) of underwater noise recorded at the mouth of the Amundsen Gulf in the marginal ice zone of the western Canadian Arctic when the area was >90% ice covered. The time-series of the ambient noise component was computed using an algorithm that filtered out transient acoustic events from 7-min hourly recordings of total ocean noise over a [0-4.1] kHz frequency band. Under-ice ambient noise did not respond to thermal changes, but showed consistent correlations with large-scale regional ice drift, wind speed, and measured currents in upper water column. The correlation of ambient noise with ice drift peaked for locations at ranges of ~300 km off the mouth of the Amundsen Gulf. These locations are within the multi-year ice plume that extends westerly along the coast in the Eastern Beaufort Sea due to the large Beaufort Gyre circulation. These results reveal that ambient noise in Eastern Beaufort Sea in winter is mainly controlled by the same meteorological and oceanographic forcing processes that drive the ice drift and the large-scale circulation in this part of the Arctic Ocean.

  19. Optimization of Ambient Noise Cross-Correlation Imaging Across Large Dense Array

    Science.gov (United States)

    Sufri, O.; Xie, Y.; Lin, F. C.; Song, W.

    2015-12-01

    Ambient Noise Tomography is currently one of the most studied topics of seismology. It gives possibility of studying physical properties of rocks from the depths of subsurface to the upper mantle depths using recorded noise sources. A network of new seismic sensors, which are capable of recording continuous seismic noise and doing the processing at the same time on-site, could help to assess possible risk of volcanic activity on a volcano and help to understand the changes in physical properties of a fault before and after an earthquake occurs. This new seismic sensor technology could also be used in oil and gas industry to figure out depletion rate of a reservoir and help to improve velocity models for obtaining better seismic reflection cross-sections. Our recent NSF funded project is bringing seismologists, signal processors, and computer scientists together to develop a new ambient noise seismic imaging system which could record continuous seismic noise and process it on-site and send Green's functions and/or tomography images to the network. Such an imaging system requires optimum amount of sensors, sensor communication, and processing of the recorded data. In order to solve these problems, we first started working on the problem of optimum amount of sensors and the communication between these sensors by using small aperture dense network called Sweetwater Array, deployed by Nodal Seismic in 2014. We downloaded ~17 day of continuous data from 2268 one-component stations between March 30-April 16 2015 from IRIS DMC and performed cross-correlation to determine the lag times between station pairs. The lag times were then entered in matrix form. Our goal is to selecting random lag time values in the matrix and assuming all other elements of the matrix either missing or unknown and performing matrix completion technique to find out how close the results from matrix completion technique would be close to the real calculated values. This would give us better idea

  20. Constraining attenuation with ambient noise correlations of reservoir scale seismic data

    Science.gov (United States)

    Weemstra, C.; Goertz, A.; Boschi, L.

    2011-12-01

    Surface waves extracted from the ambient seismic wave field via interferometry can be used for velocity inversion. Bussat & Kugler (2009) adapted this approach to Scholte waves at frequencies up to 1 Hz, extracted from comparatively short broad band Ocean Bottom Seismometer (BBOBS) recordings. Shear wave velocities were obtained by De Ridder and Biondi (2010) for seismic land data at the reservoir scale. By fitting a modified Bessel function to the real part of the stacked cross spectra Prieto et al. (2009) obtained a 1-Dimensional Q profile for Southern California. We applied this approach to two passive seismic data sets and compare the results. The first recorded on land, the second being BBOBS recordings. The survey characteristics are roughly the same considering scale and length of the recordings. The data characteristics however are quite different. The main energy in the OBS data below ˜2 Hz stems from swell noise and ocean microseisms. This energy is expressed as Scholte waves traveling along the seabed. The land passive data set is the result of a survey over a gas storage facility in Central France and the main energy corresponds to microseisms and anthropogenic noise. The land seismic survey was carried out twice. Once for a filled reservoir and once for an empty reservoir. The subsurface geology is well-known. About 200 three-component broadband particle velocity sensors were deployed. Data was recorded for 24-48 hours at 610 surface locations. Station spacing is nominally 500m. The data is cut into time windows of 60 seconds and whitened. Stacked cross spectra are obtained for all station couples. The stability of the cross spectra is examined with respect to (1) the power of the cross correlated wave field and (2) the azimuth of the station couples. In the presence of anisotropy of the noise source geographic distribution, we can average the calculated cross spectra over station-station azimuth. Theory derived for an isotropic source distribution

  1. Radial anisotropy in Valhall: ambient noise-based studies of Scholte and Love waves

    Science.gov (United States)

    Tomar, Gaurav; Shapiro, Nikolai M.; Mordret, Aurelien; Singh, Satish C.; Montagner, Jean-Paul

    2017-03-01

    We perform the ambient noise Scholte and Love waves phase-velocity tomography to image the shallow subsurface (a few hundreds of metres) at the Valhall oil field. Seismic noise was recorded by multicomponent (north, east and vertical) ocean bottom cable from the Valhall life of field seismic network. We cross-correlate six and a half hours of continuous recording of noise between all possible pairs of receivers. The vertical-vertical and the transverse-transverse components cross-correlations are used to extract the Scholte and Love waves, respectively. We combine more than 10 millions of interstation correlations to compute the average phase-velocity dispersion curves for fundamental mode and first overtone. Then, a Monte Carlo inversion method is used to compute average 1-D profiles of VSV and VSH down to 600 m depth. In the next step, we construct 2-D Scholte and Love waves phase-velocity maps for fundamental mode using the eikonal tomography method. These maps are then jointly inverted to get the 3-D distribution of VSV and VSH from which the radial anisotropy and the isotropic velocity (VS) are estimated. The final model includes two layers of anisotropy: one in the shallow part (above 220 m) with a significant negative radial anisotropy (VSH VSV) due to the stratification at that depth.

  2. Characterization of site-effects in the urban area of Canakkale, Turkey, using ambient noise measurements

    Science.gov (United States)

    Demirci, Alper; Bekler, Tolga; Karagöz, Özlem

    2010-05-01

    The local site conditions can cause variations in the ground motion during the earthquake events. These local effects can be estimated by Nakamura method (1989) which is based on the analysis and treatment of earth vibration records by calculating the ratio of horizontal spectrum to vertical spectrum (H/V). This approach uses ambient noises and aids to estimate the dynamic soil conditions like fundamental vibration period and soil amplification of the surface layers, to characterize the seismic hazard during earthquakes and to provide detailed information for seismic microzonation in small scale urban areas. Due to these advantages, the method has been frequently used by a great number of seismologists and engineers. In this study, we aimed at explaining the soil conditions in Çanakkale and Kepez basins by using H/V technique. Çanakkale and Kepez (NW, Turkey) have fairly complex tectonic structure and have been exposed to serious earthquake damages in historical and instrumental period. Active faults, which have influence on the Çanakkale and Kepez settlements, are the Yenice-Gönen fault, Saroz-Gaziköy fault and Etili fault. It is well known that, these faults have produced high magnitude earthquakes such as 7.2 in 1912 and 7.3 in 1953. The surface geology of the surveyed area is covered by quaternary aged sediments. Sarıçay river, which originates from the eastern hilly area, accumulates sediment deposits and forms this alluvial basin. Considering the geological conditions, ambient noises were recorded at 88 measurement points which were selected to provide good coverage of the study area. All records were acquired during the midnight (between 1:00 am and 6:00 am) to reduce the artificial effects in the urban area. Taking into account the effects of undesirable traffic and industrial noises in the vicinity of measurements stations, record lengths were chosen in the range of 25-75 minutes with the sampling rate of 100 Hz. Once the required signal processes

  3. AIRPORT NOISE CHARGES AND LOCAL COMMUNITIES: APPLICATION TO REGIONAL AIRPORTS

    Directory of Open Access Journals (Sweden)

    LUCA MANTECCHINI

    2016-11-01

    Full Text Available There have always been conflicts among airports and local communities due to the aeronautical noise generated by airport operations. In fact, this is a factor that - if not properly managed - could severely cut down the growth of air traffic in an airport with direct effects on the economic and territorial system. Beside this, in the last decade the critical issues related to the impact of aeronautical noise on airport operations have greatly reduced, thanks to technological improvements in aircraft design. Nevertheless, the reduction of noise emissions during a single aircraft operation does not make the issue of the airports’ location less important. This is the case of regional airports in EU, which have recently experimented a large traffic increase due to the development of low-cost traffic. It is now clear that the problem cannot be reduced to its mere technological aspect, but it ought to be dealt with the involvement of the various stakeholders in order to mitigate the emissions and adequately compensate the impacts to local communities. Typically, there are two possible countermeasures to mitigate the effects of aircraft noise: operational measures, based on the application of technological and organizational devices and market-based measures. The application of noise taxes, aiming at compensating the negative externalities generated by airport operations is becoming increasingly widespread in EU. In this paper, a methodology for the application of noise taxes based on the actual noise of aircraft operating into an airport is discussed and implemented in a test case.

  4. Broad-band Rayleigh wave phase velocity maps (10-150 s) across the United States from ambient noise data

    Science.gov (United States)

    Zhao, Kaifeng; Luo, Yinhe; Xie, Jun

    2017-02-01

    In this study, we demonstrate the feasibility of imaging broad-band (10-150 s) Rayleigh wave phase velocity maps on a continental scale using ambient noise tomography (ANT). We obtain broad-band Rayleigh waves from cross-correlations of ambient noise data between all station pairs of USArray and measure the dispersion curves from these cross-correlations at a period band of 10-150 s. The large-scale dense USArray enables us to obtain over 500 000 surface wave paths which cover the contiguous United States densely. Using these paths, we generate Rayleigh wave phase velocity maps at 10-150 s periods. Our phase velocity maps are similar to other reported phase velocity maps based on ambient noise data at short periods (phase velocity maps from ANT can be used to construct 3-D lithospheric and asthenospheric velocity structures.

  5. Imaging the lithospheric structure of the High Lava Plains, Oregon with ambient noise tomography

    Science.gov (United States)

    Hanson-Hedgecock, S.; Wagner, L. S.; Fouch, M. J.

    2010-12-01

    We use ambient noise tomography (ANT) to image the 3-D structure of the crust and uppermost mantle beneath the High Lava Plains, Oregon using data from ~300 broadband stations of the High Lava Plains seismic experiment and the EarthScope/USArray Transportable Array (TA). The High Lava Plains consists of WNW progressive silicic volcanism, beginning ~14.5 Ma near the Owyhee Plateau and continuing to ~1.5 Ma in outpourings near the Newberry caldera. Superimposed basaltic volcanism has occurred along the hotspot since ~10.5 Ma. The Snake River Plain’s volcanism has been associated with a Yellowstone hot spot due to its alignment with North American plate motion, but the High Lava Plains volcanism does not have a comparably straightforward explanation. Recent results from a surface wave tomographic study of the Yellowstone/Snake River Plains (YSRP) reveal a discrete low velocity anomaly in the upper mantle that shallows to the northeast, consistent with plate motion over a stationary heat source. The same study shows a discontinuous low velocity anomaly beneath the High Lava Plains, indicating a less continuous east to west heat source along the HLP volcanic track. To better resolve the shallow velocity structure beneath the High Lava Plains, ANT is used to determine phase velocity maps at periods of <8s to 40s. At periods between 20 and 40s the ambient noise phase velocity maps complement the surface wave tomographic results and provide additional constraints on velocity structure. ANT has improved lateral resolution, compared to traditional surface wave tomography, because of the more homogenous azimuthal content of ambient noise. Vertical resolution of shallower crustal structures is also improved; ANT is able to resolve velocity structures at periods below 20s. Lastly, the dense station spacing of the combined HLP and TA dataset allows the shallow structure of the High Lava Plains to be imaged in more detail than previous ANT studies that focused on the entire

  6. Imaging crustal structure using local earthquake and ambient noise tomography in North Texas

    Science.gov (United States)

    Sufri, O.; DeShon, H. R.; Scales, M. M.; Hayward, C.; Magnani, M. B.

    2016-12-01

    North Texas, including the Dallas-Fort Worth metroplex, has experienced an increase in seismicity rate since 2008 and these events have been linked, to varying degrees of certainty, to wastewater injection in the Ordovician Ellenburger Formation, deposited on top of the crystalline basement. We focus here on local earthquake and ambient noise tomography approaches to imaging the subsurface velocity heterogeneity associated with the larger and better-recorded North Texas sequence: the Azle-Reno, the Irving-Dallas, and the M4 Venus earthquake sequences. The 2013-2014 Azle-Reno sequence generated 27 felt earthquakes (M2.1-3.6) between November 2013 and January 2014, although earthquake rates at lower magnitude levels (M0-2) during the same time window were highly variable. The most recent set of Azle-Reno earthquakes occurred in December 2015, following a nearby M3.0 event near Haslet. SMU and collaborators currently operate 30 seismic stations in the basin. In addition, SMU and Nodal Seismic collaborated to deploy a dense network of 10 Hz single-component (vertical) sensors over the Azle-Reno earthquakes source zone. Ten days of continuous data were acquired between February 25 and March 8, 2014. We present results of double-difference local earthquake tomography and ambient noise tomography using the local network and the nodal datasets. Ambient noise tomography allows us to obtain higher resolution near surface structure and group velocity maps to complement the Vp, Vs and Vp/Vs images provided by the local earthquake dataset. Local earthquake tomography results for the Irving-Dallas and Venus (Johnson County) seismicity will also be presented. The Fort Worth basin deepens from west-to-east, and we hypothesize that large NE-SW trending basement faults, some of which have been reactivated since 2008, compartmentalize the subsurface. Exploring similarities and differences in velocity heterogeneities in the Ellenburger formation, and the crystalline basement using

  7. Seismic tomography and ambient noise reflection interferometry on Reykjanes, SW Iceland

    Science.gov (United States)

    Jousset, Philippe; Verdel, Arie; Ágústsson, Kristján; Blanck, Hanna; Franke, Steven; Metz, Malte; Ryberg, Trond; Weemstra, Cornelius; Hersir, Gylfi; Bruhn, David

    2016-04-01

    Recent advances in volcano-seismology and seismic noise interferometry have introduced new processing techniques for assessing subsurface structures and controls on fluid flow in geothermal systems. We present tomographic results obtained from seismic data recorded around geothermal reservoirs located both on-land Reykjanes, SW-Iceland and offshore along Reykjanes Ridge. We gathered records from a network of 234 seismic stations (including 24 Ocean Bottom Seismometers) deployed between April 2014 and August 2015. In order to determine the orientation of the OBS stations, we used Rayleigh waves planar particle motions from large magnitude earthquakes. This method proved suitable using the on-land stations: orientations determined using this method with the orientations measured using a giro-compass agreed. We obtain 3D velocity images from two fundamentally different tomography methods. First, we used local earthquakes to perform travel time tomography. The processing includes first arrival picking of P- and S- phases using an automatic detection and picking technique based on Akaike Information Criteria. We locate earthquakes by using a non-linear localization technique, as a priori information for deriving a 1D velocity model. We then computed 3D velocity models of velocities by joint inversion of each earthquake's location and lateral velocity anomalies with respect to the 1D model. Our models confirms previous models obtained in the area, with enhanced details. Second, we performed ambient noise cross-correlation techniques in order to derive an S velocity model, especially where earthquakes did not occur. Cross-correlation techniques involve the computation of cross- correlation between seismic records, from which Green's functions are estimated. Surface wave inversion of the Green's functions allows derivation of an S wave velocity model. Noise correlation theory furthermore shows that zero-offset P-wave reflectivity at selected station locations can be

  8. Seismic Tomography Around the Eastern Edge of the Alps From Ambient-Noise-Based Rayleigh Waves

    Science.gov (United States)

    Zigone, Dimitri; Fuchs, Florian; Kolinsky, Petr; Gröschl, Gidera; Apoloner, Maria-Theresia; Qorbani, Ehsan; Schippkus, Sven; Löberich, Eric; Bokelmann, Götz; AlpArray Working Group

    2016-04-01

    Inspecting ambient noise Green's functions is an excellent tool for monitoring the quality of seismic data, and for swiftly detecting changes in the configuration of a seismological station. Those Green's functions readily provide stable information about structural variations near the Earth's surface. We apply the technique to a network consisting of about 40 broadband stations in the area of the Easternmost Alps, in particular those operated by the University of Vienna (AlpArrayAustria) and the Vienna University of Technology. Those data are used to estimate Green's functions between station pairs; the Green's function consist mainly of surface waves, and we use them to investigate crustal structure near the Eastern edge of the Alps. To obtain better signal-to-noise ratios in the noise correlation functions, we adopt a procedure using short time windows (2 hr). Energy tests are performed on the data to remove effects of transient sources and instrumental problems. The resulting 9-component correlation tensor is used to make travel time measurements on the vertical, radial and transverse components. Those measurements can be used to evaluate dispersion using frequency-time analysis for periods between 5-30 seconds. After rejecting paths without sufficient signal-to-noise ratio, we invert the velocity measurements using the Barmin et al. (2001) approach on a 10 km grid size. The obtained group velocity maps reveal complex structures with clear velocity contrasts between sedimentary basins and crystalline rocks. The Bohemian Massif and the Northern Calcareous Alps are associated with fast-velocity bodies. By contrast, the Vienna Basin presents clear low-velocity zones with group velocities down to 2 km/s at period of 7 s. The group velocities are then inverted to 3D images of shear wave speeds using the linear inversion method of Herrmann (2013). The results highlight the complex crustal structure and complement earthquake tomography studies in the region. Updated

  9. High-resolution shallow structure revealed with ambient noise tomography on a dense array

    Science.gov (United States)

    Zeng, X.; Thurber, C. H.; Luo, Y.; Matzel, E.; Team, P.

    2016-12-01

    A dense seismic array was deployed by the PoroTomo research team at Brady Hot Springs, Nevada in March 2016. The array consisted of 238 short-period three-component geophones (5-Hz corner frequency) with about 60 m spacing. Over the 15 day deployment, the array recorded over 6,000 active source signals (vibroseis sweeps) and ambient noise that was dominated by traffic noise.We adopted the one-bit method to better reduce the effect of the active source. Spectral whitening was performed between 0.5 and 2 Hz. The continuous record was chopped into 1 minute segments. The 1-minute cross-correlation functions were initially stacked linearly, and then the phase-weighted stacking method was applied to improve signal quality. More than two million noise correlation functions (NCFs) have been obtained.The Rayleigh wave group velocity was measured on the symmetric component of the NCFs with the frequency-time analysis method. The average group velocity is about 400 m/s at 4 Hz, which is consistent with preliminary active source result. To avoid mis-picking possible precursors, the arrival time was picked at the peak in a two-second time window predicted with the average group velocity of the fundamental mode. The quality of the arrival measurements is defined by the signal-to-noise ratio. We were able to pick reliable arrivals at about 35% of the station-pairs. Since the straight-ray assumption may not be valid in a strongly heterogeneous medium, the wave path was traced with a finite difference scheme and the LSQR method was utilized to invert group velocity. The heterogeneous features of the group velocity map are consistent with a local geologic map. The PoroTomo project is funded by a grant from the U.S. Department of Energy.

  10. Monitoring seismic velocity changes caused by the 2014 Northern Aegean earthquake using continuous ambient noise records

    Science.gov (United States)

    Evangelidis, Christos; Daskalakis, Emmanouil; Tsogka, Chrysoula

    2016-04-01

    The 24 May 2014 Northern Aegean earthquake (6.9 Mw), an event on the Northern Aegean Trough (NAT), ruptured on two different fault segments with a total ruptured length of ~100 km. For the second delayed segment, rupture propagated eastward from the hypocenter for ˜65 km with a supershear velocity (5.5 km/s). Low-aftershock seismicity on the supershear segment implies a simple and linear fault geometry there. An effort to monitor temporal seismic velocity changes across the ruptured area of the Northern Aegean earthquake is underway. In recent years, neighboring seismic broadband stations near active faults have been successfully used to detect such changes. The crosscorrelation functions (CCF) of ambient noise records between stations yields the corresponding traveltimes for those inter-station paths. Moreover, the auto-correlation functions (ACF) at each station produce the seismic responce for a coincident source and receiver position. Possible temporal changes of the measured traveltimes from CCFs and ACFs correspond to seismic velocity changes. Initially, we investigate the characteristics and sources of the ambient seismic noise as recorded at permanent seismic stations installed around NAT at the surrounding islands and in mainland Greece and Turkey. The microseismic noise levels show a clear seasonal variation at all stations. The noise levels across the double frequency band (DF; period range 4-8 s) reflect the local sea-weather conditions within a range of a few hundred kilometers. Three years of continuous seismic records framing the main shock have been analysed from ~15 stations within a radius of 100 km from the epicentre. We observe a clear decrease of seismic velocities most likely corresponding to the co-seismic shaking. The spatial variation of this velocity drop is imaged from all inter-station paths that correspond to CCF measurements and for station sites that correspond to ACF measurements. Thus, we explore a possible correlation between co

  11. Structure of the Los Angeles Basin from ambient noise and receiver functions

    Science.gov (United States)

    Ma, Yiran; Clayton, Robert W.

    2016-09-01

    A velocity (Vs) and structure model is derived for the Los Angeles Basin, California based on ambient-noise surface wave and receiver-function analysis, using data from a low-cost, short-duration, dense broad-band survey (LASSIE) deployed across the basin. The shear wave velocities show lateral variations at the Compton-Los Alamitos and the Whittier Faults. The basement beneath the Puente Hills-San Gabriel Valley shows an unusually high velocity (˜4.0 km s-1) and indicates the presence of schist. The structure of the model shows that the basin is a maximum of 8 km deep along the profile and that the Moho rises to a depth of 17 km under the basin. The basin has a stretch factor of 2.6 in the centre grading to 1.3 at the edges and is in approximate isostatic equilibrium.

  12. 3D Shallow crustal structure of Madeira island revealed from ambient noise tomography

    Science.gov (United States)

    Matos, C.; Silveira, G. M.; Matias, L. M.; Ribeiro, L.; Dias, N. A.; Caldeira, R.; Rosa, C.; Krueger, F.

    2013-12-01

    Madeira is an intraplate volcanic island, located at the eastern North Atlantic Ocean, in front of the Moroccan cost, with an emerged area of 737 km2 and maximum altitude of 1861 m. Madeira shows an E-W-oriented elongation, which reflects the orientation of its rift zone. Rift zones play a fundamental role in the constitution and evolution of volcanic islands and it is important to image their internal structure as a function of depth. Constrains like source-receiver geometry, irregular seismicity distribution or, for some methods, low seismicity occurrence did not allow to obtain high-resolution models of the Madeira crustal structure using traditional passive seismology. Seismic interferometry/ambient noise surface-waves tomography allows imaging regions with a resolution that mainly depends on the seismic network coverage. From May 2011 to September 2012, a temporary pool of 23 seismometers has been continuously recording at Madeira Island. This deployment was complemented with other local permanent stations. The ambient noise data was processed following five main steps: (1) Data quality control; (2) Cross-correlation of 1 hour time windows between each station pair and subsequent stacking for the entire recording period; (3) Time-frequency analysis to measure group-velocity dispersion curves between 0.5 and 6 seconds; (4) 2D inversion to obtain lateral variations of the Rayleigh-wave group-velocities as function of the period; (5) Group velocity inversion as a function of depth to map the 3D structure beneath Madeira. From the surface to 4 km depth, the edge of the rift, along which the island possibly grow, is well correlated with a strong positive anomaly on our maps. This anomaly seems to be perturbed by the presence of low velocities at a depth of 2 km. After 5 km the rift signature is no longer visible. This work is supported by project QUAKELOC Reference: PTDC/GEO-FIQ/3522/2012

  13. Subsurface Characterization Beneath the Coso Geothermal Field by Ambient Noise Tomography

    Science.gov (United States)

    Ritzwoller, M. H.; Yang, Y.; Levshin, A. L.; Barmin, M. P.; Jones, C. H.

    2009-12-01

    The Coso Geothermal Area has been the subject of numerous geophysical studies over the past 30 years. Various seismological techniques have been applied to evaluate the regional stress distribution, velocity and attenuation structure of the subsurface. None of these studies has imaged subsurface shear velocity using surface waves generated either by local micro-earthquakes or by regional or teleseismic earthquakes, nor have any used interferometric methods based on ambient noise. In this study, we apply an interferometic method based on ambient seismic noise aimed at imaging the shallow shear velocity structure beneath the Coso Geothermal Area. Data are from a PASSCAL experiment deployed between 1998 and 2000 and regional broad-band seismometers operated by CalTech. Cross-correlations are performed between each pair of the COSO PASSCAL and CalTech stations for 15 months from March 1999 to May 2000. After compensating for or correcting instrumental irregularities and selecting reliable Rayleigh wave dispersion measurements from the inter-station cross-correlations, we obtain about 300 measurement paths as the basis for surface wave tomography at periods from 3 to 10 sec. Uncertainties of both group and phase velocity measurements are estimated using the variations among the dispersion curves from one-month cross-correlations in different months. The resulting dispersion maps reveal low group and phase velocities in the COSO volcanic field, especially at 3 sec period for group velocities, and high velocities to the east of the COSO volcanic field. The velocity variations are consistent with surface geological features, which encourages future inversion for 3-D shear velocity structure in the top 15 km of the crust.

  14. Environmental resources of selected areas of Hawaii: Climate, ambient air quality, and noise

    Energy Technology Data Exchange (ETDEWEB)

    Lombardi, D.A.; Blasing, T.J.; Easterly, C.E.; Reed, R.M. [Oak Ridge National Lab., TN (United States); Hamilton, C.B. [Univ. of Tennessee, Knoxville, TN (United States)

    1995-03-01

    This report has been prepared to make available and archive background scientific data and related information on climate, ambient air quality, and ambient noise levels collected during the preparation of the environmental impact statement (EIS) for Phases 3 and 4 of the Hawaii Geothermal Project (HGP) as defined by the state of Hawaii in its April 1989 proposal to Congress. The US Department of Energy (DOE) published a notice withdrawing its Notice of Intent to prepare the HGP-EIS. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated. The report presents a general description of the climate add air quality for the islands of Hawaii (henceforth referred to as Hawaii), Maui and Oahu. It also presents a literature review as baseline information on the health effects of sulfide. The scientific background data and related information is being made available for use by others in conducting future scientific research in these areas. This report describes the environmental resources present in the areas studied (i.e., the affected environment) and does not represent an assessment of environmental impacts.

  15. Environmental Resources of Selected Areas of Hawaii: Climate, Ambient Air Quality, and Noise (DRAFT)

    Energy Technology Data Exchange (ETDEWEB)

    Lombardi, D.A.; Blasing, T.J.; Easterly, C.E.; Hamilton, C.B.

    1994-06-01

    This report has been prepared to make available and archive background scientific data and related information on climate, ambient air quality, and ambient noise levels collected during the preparation of the environmental impact statement (EIS) for Phases 3 and 4 of the Hawaii Geothermal Project (HGP) as defined by the state of hawaii in its April 1989 proposal to Congress. The US Department of Energy (DOE) published a notice in the Federal Register on May 17, 1994 withdrawing its Notice of Intent of February 14, 1992, to prepare the HGP-EIS. Since the state of Hawaii is no longer pursuing or planning to pursue the HGP, DOE considers the project to be terminated. The report presents a general description of the climate and air quality for the islands of Hawaii (henceforth referred to as Hawaii), Maui, and Oahu. It also presents a literature review as baseline information on the health effects of hydrogen sulfide. the scientific background data and related information is being made available for use by others in conducting future scientific research in these areas. This report describes the environmental resources present in the areas studied (i.e., the affected environment) and does not represent an assessment of environmental impacts.

  16. Aircraft noise reduction technology. [to show impact on individuals and communities, component noise sources, and operational procedures to reduce impact

    Science.gov (United States)

    1973-01-01

    Aircraft and airport noise reduction technology programs conducted by NASA are presented. The subjects discussed are: (1) effects of aircraft noise on individuals and communities, (2) status of aircraft source noise technology, (3) operational procedures to reduce the impact of aircraft noise, and (4) NASA relations with military services in aircraft noise problems. References to more detailed technical literature on the subjects discussed are included.

  17. Synthesis of Virtual Environments for Aircraft Community Noise Impact Studies

    Science.gov (United States)

    Rizzi, Stephen A.; Sullivan, Brenda M.

    2005-01-01

    A new capability has been developed for the creation of virtual environments for the study of aircraft community noise. It is applicable for use with both recorded and synthesized aircraft noise. When using synthesized noise, a three-stage process is adopted involving non-real-time prediction and synthesis stages followed by a real-time rendering stage. Included in the prediction-based source noise synthesis are temporal variations associated with changes in operational state, and low frequency fluctuations that are present under all operating conditions. Included in the rendering stage are the effects of spreading loss, absolute delay, atmospheric absorption, ground reflections, and binaural filtering. Results of prediction, synthesis and rendering stages are presented.

  18. Studies of ambient noise in shallow water environments off Mexico and Alaska: characteristics, metrics and time-synchronization applications

    Science.gov (United States)

    Guerra, Melania

    Sound in the ocean originates from multiple mechanisms, both natural and anthropogenic. Collectively, underwater ambient noise accumulates valuable information about both its sources and the oceanic environment that propagates this noise. Characterizing the features of ambient noise source mechanisms is challenging, but essential, for properly describing an acoustic environment. Disturbances to a local acoustic environment may affect many aquatic species that have adapted to be heavily dependent on this particular sense for survival functions. In the case of marine mammals, which are federally protected, demand exists for understanding such potential impacts, which drives important scientific efforts that utilize passive acoustic monitoring (PAM) tools to inform regulatory decisions. This dissertation presents two independent studies that use PAM data to investigate the characteristics of source mechanisms that dominate ambient noise in two diverse shallow water environments. The study in Chapter 2 directly addresses the concern of how anthropogenic activities can degrade the effectiveness of PAM. In the Alaskan Beaufort Sea, an environment where ambient noise is normally dominated by natural causes, seismic surveys create impulsive sounds to map the composition of the bottom. By inspecting single-sensor PAM data, the spectral characteristics of seismic survey airgun reverberation are measured, and their contribution to the overall ambient noise is quantified. This work is relevant to multiple ongoing mitigation protocols that rely on PAM to acoustically detect marine mammal presence during industrial operations. Meanwhile, Chapter 3 demonstrates that by analyzing data from multiple PAM sensors, features embedded in both directional and omnidirectional ambient noise can be used to develop new time-synchronization processing techniques for aligning autonomous elements of an acoustic array, a tool commonly used in PAM for detecting and tracking marine mammals. Using

  19. The uppermost crust structure of Ischia (southern Italy) from ambient noise Rayleigh waves

    Science.gov (United States)

    Strollo, R.; Nunziata, C.; Iannotta, A.; Iannotta, D.

    2015-05-01

    Ambient noise measurements were performed at the island of Ischia (southern Italy) along alignments of 2.4-7 km by using two three-component seismic stations. Synchronous noise recordings of 2-20 h were cross-correlated over 20-30 s windows, stacked and iteratively band-pass filtered to enhance the dispersive wave trains. Frequency time analysis was performed on the vertical and radial components of cross-correlations and the fundamental-mode Rayleigh wave group velocity was obtained. Validation of the dispersion data was possible with those obtained from an earthquake recording along a close path. The non-linear inversion of average Rayleigh wave group velocity dispersion curves along 13 paths (receiver inter-distances) allowed the definition of shear wave velocity models in the uppermost 1-2 km of the crust. The correlation of VS profiles vs. depth and drilling stratigraphy allowed to attribute VS lower than 1 km/s to tuffs and VS of 1.41 km/s to very fractured lavas. Higher VS are found in the central area of the island, in correspondence of the resurgent area. The top of the trachytic lava basement, with VS of 2.2-2.4 km/s and density of 2.3 g/cm3 is about 0.6-0.7 km deep b.s.l. in the centre of Ischia, below altered, very fractured lava or thermally altered tuff.

  20. Upper crustal structure of central Java, Indonesia, from transdimensional seismic ambient noise tomography

    Science.gov (United States)

    Zulfakriza, Z.; Saygin, E.; Cummins, P. R.; Widiyantoro, S.; Nugraha, A. D.; Lühr, B.-G.; Bodin, T.

    2014-04-01

    Delineating the crustal structure of central Java is crucial for understanding its complex tectonic setting. However, seismic imaging of the strong heterogeneity typical of such a tectonically active region can be challenging, particularly in the upper crust where velocity contrasts are strongest and steep body wave ray paths provide poor resolution. To overcome these difficulties, we apply the technique of ambient noise tomography (ANT) to data collected during the Merapi Amphibious Experiment (MERAMEX), which covered central Java with a temporary deployment of over 120 seismometers during 2004 May-October. More than 5000 Rayleigh wave Green's functions were extracted by cross-correlating the noise simultaneously recorded at available station pairs. We applied a fully non-linear 2-D Bayesian probabilistic inversion technique to the retrieved traveltimes. Features in the derived tomographic images correlate well with previous studies, and some shallow structures that were not evident in previous studies are clearly imaged with ANT. The Kendeng Basin and several active volcanoes appear with very low group velocities, and anomalies with relatively high velocities can be interpreted in terms of crustal sutures and/or surface geological features.

  1. Ambient noise tomography across Mount St. Helens using a dense seismic array

    Science.gov (United States)

    Wang, Yadong; Lin, Fan-Chi; Schmandt, Brandon; Farrell, Jamie

    2017-06-01

    We investigated upper crustal structure with data from a dense seismic array deployed around Mount St. Helens for 2 weeks in the summer of 2014. Interstation cross correlations of ambient seismic noise data from the array were obtained, and clear fundamental mode Rayleigh waves were observed between 2.5 and 5 s periods. In addition, higher-mode signals were observed around 2 s period. Frequency-time analysis was applied to measure fundamental mode Rayleigh wave phase velocities, which were used to invert for 2-D phase velocity maps. An azimuth-dependent traveltime correction was implemented to mitigate potential biases introduced due to an inhomogeneous noise source distribution. Reliable phase velocity maps were only obtained between 3 and 4 s periods due to limitations imposed by the array aperture and higher-mode contamination. The phase velocity tomography results, which are sensitive to structure shallower than 6 km depth, reveal an 10-15% low-velocity anomaly centered beneath the volcanic edifice and peripheral high-velocity anomalies that likely correspond to cooled igneous intrusions. We suggest that the low-velocity anomaly reflects the high-porosity mixture of lava and ash deposits near the surface of the edifice, a highly fractured magmatic conduit and hydrothermal system beneath the volcano, and possibly a small contribution from silicate melt.

  2. Direct ambient noise tomography for 3-D near surface shear velocity structure: methodology and applications

    Science.gov (United States)

    Yao, H.; Fang, H.; Li, C.; Liu, Y.; Zhang, H.; van der Hilst, R. D.; Huang, Y. C.

    2014-12-01

    Ambient noise tomography has provided essential constraints on crustal and uppermost mantle shear velocity structure in global seismology. Recent studies demonstrate that high frequency (e.g., ~ 1 Hz) surface waves between receivers at short distances can be successfully retrieved from ambient noise cross-correlation and then be used for imaging near surface or shallow crustal shear velocity structures. This approach provides important information for strong ground motion prediction in seismically active area and overburden structure characterization in oil and gas fields. Here we propose a new tomographic method to invert all surface wave dispersion data for 3-D variations of shear wavespeed without the intermediate step of phase or group velocity maps.The method uses frequency-dependent propagation paths and a wavelet-based sparsity-constrained tomographic inversion. A fast marching method is used to compute, at each period, surface wave traveltimes and ray paths between sources and receivers. This avoids the assumption of great-circle propagation that is used in most surface wave tomographic studies, but which is not appropriate in complex media. The wavelet coefficients of the velocity model are estimated with an iteratively reweighted least squares (IRLS) algorithm, and upon iterations the surface wave ray paths and the data sensitivity matrix are updated from the newly obtained velocity model. We apply this new method to determine the 3-D near surface wavespeed variations in the Taipei basin of Taiwan, Hefei urban area and a shale and gas production field in China using the high-frequency interstation Rayleigh wave dispersion data extracted from ambient noisecross-correlation. The results reveal strong effects of off-great-circle propagation of high-frequency surface waves in these regions with above 30% shear wavespeed variations. The proposed approach is more efficient and robust than the traditional two-step surface wave tomography for imaging complex

  3. Crustal Structure of the Northern Chilean Forearc from Ambient Noise Tomography

    Science.gov (United States)

    Comte, D.; Carrizo, D.; Roecker, S. W.; Peyrat, S.; Arriaza, R.; Chi, R. K.; Baeza, S.

    2015-12-01

    In addition to being an excellent venue for investigating the tectonics of the Andean margin, northern Chile is of particular interest to seismologists because of its potential for an imminent megathrust earthquake. Such events often trigger destructive seismic activity in the populated forearc, as demonstrated for example in the aftermath of the 2010 Maule event. To investigate the nature of deformation in the forearc, we generated high resolution images of the subsurface from Rayleigh wave dispersion curves derived from cross correlation of ambient noise. The ambient noise data were recorded over a period of three years by 60 stations from three different networks of broad band stations. Because of the proximity of the stations to the Pacific Ocean, we estimated the bias in the estimated Green's functions caused by the asymmetry of the noise distribution using a technique based on that described by Yao and van der Hilst (2009). Our results suggest that this bias can be as large as 5% for some station pairs. The unbiased times are then used to refine phase velocity maps, from which we derived transit times to generate a 3D image of shear wavespeed (Vs) from the surface to about 50 km depth. To first order, low-Vs anomalies correlate well with the geometry of the Atacama Bench Structure (western foreland basin) where leaching processes are related to large incisions in the Atacama Desert (north of 19ºS). In addition, high Vs anomalies correlate with the locations of fossil magmatic arcs developed as trench-parallel belts from the coast to the Altiplano. For example, high Vs correlates with the Jurassic-Cretaceous magmatic arc along the coast, the Paleocene-Oligocene magmatic arc in the central depression, and the Eocene-Oligocene magmatic arc in the Frontal Cordillera. A continuous seismic anomaly of low-Vs, located between 15 - 25 km depth, may be evidence of a weak and/or hydrated zone within the lower continental crust, related to slab-linked upper plate

  4. Studying CO2 storage with ambient-noise seismic interferometry: A combined numerical feasibility study and field-data example for Ketzin, Germany

    NARCIS (Netherlands)

    Boullenger, B.; Verdel, A.; Paap, B.; Thorbecke, J.W.; Draganov, D.S.

    2015-01-01

    Seismic interferometry applied to ambient-noise measurements allows the retrieval of the seismic response between pairs of receivers. We studied ambient-noise seismic interferometry (ANSI) to retrieve time-lapse reflection responses from a reservoir during CO2 geologic sequestration, using the case

  5. Using ambient seismic noise correlations to monitor the temporal stability of mines, tailings dams and nuclear storage facilities

    Science.gov (United States)

    Olivier, G.; Brenguier, F.

    2016-12-01

    Cross-correlating ambient seismic noise has become an increasingly popular method to image and monitor the earth at different scales. In many industrial operations, such as underground mines, tailings dams, underground nuclear storage facilities and slopes prone to landslides, subtle deformation and degradation over time can lead to catastrophic failure and even loss of life. Ambient seismic noise correlations has the potential to measure gradual changes of the elastic properties in these environments and ultimately to improve early warning and hazard identification. Unfortunately, the seismic noise generated by industrial activity can be unstable and erratic, which in turn leads to erroneous apparent changes in seismic velocity that can mask real changes in elastic properties. In this presentation, we will show the advances that have been made in the robust construction of the seismic Green's functions and the accurate measurement of seismic velocity changes even in the presence of a non-uniform distribution of seismic sources and changing noise source distributions. This enables us to use ambient seismic noise correlations to monitor small changes in seismic velocity due to subtle changes in the internal structures in industrial applications. Finally, we show numerous examples of our efforts to apply this method as a routine tool to monitor the stability of potentially hazardous industrial areas like underground mines, nuclear storage facilities and tailings dam walls.

  6. Seismic local site effects characterization in the Andarax River Valley (SE Spain) from ambient seismic noise

    Science.gov (United States)

    Carmona, Enrique; García-Jerez, Antonio; Luzón, Francisco; Sánchez-Martos, Francisco; Sánchez-Sesma, Francisco J.; Piña, José

    2014-05-01

    This work is focused on the characterization of seismic local effects in the Low Andarax River Valley (SE Spain). The Low Andarax River valley is located in an active seismic region, with the higher seismic hazard values in Spain. The landform is composed mainly by sedimentary materials which increase its seismic hazard due to the amplification of the seismic inputs and spectral resonances. We study seismic local effects in the Low Andarax River by analyzing the Horizontal-to-Vertical Spectral Ratio (HVSR) of ambient noise records. The noise data were recorded during two field campaigns in 2012 and 2013. There have been a total of 374 noise measurements with 15 and 30 minutes duration. The acquisition was performed with a Digital Broadband Seismometer Guralp CMG-6TD. The distance between measurements was about 200 meters, covering an area around 40 km2. There have been 6 significant peak frequencies between 0.3 Hz and 5 Hz. It was possible to find interesting areas with similar spectral peaks that coincide with zones with similar microgravimetric anomalies at the alluvial valley. It is also observed a decrease in the frequency peaks from West to East suggesting increased sediment layer. We also compute the soil models at those sites where geotechnical information is available, assuming that the seismic noise is diffuse. We invert the HVSR for these places using horizontally layered models and in the imaginary part the Green functions at the source. It is observed that the S wave velocity inverted models are consistent with the known geotechnical information obtained from drilled boreholes. We identify the elastodynamic properties of the limestone-dolomite materials with a formation of phyllites and quartzite that form the basement of the depression, and those properties of the Miocene and Pliocene detrital deposits (marls, sandy silts, sands and conglomerates) that fill the valley. These results together with the observed resonant frequencies along the Andarax

  7. An Engineering Approach to Management of Occupational and Community Noise Exposure at NASA Lewis Research Center

    Science.gov (United States)

    Cooper, Beth A.

    1997-01-01

    Workplace and environmental noise issues at NASA Lewis Research Center are effectively managed via a three-part program that addresses hearing conservation, community noise control, and noise control engineering. The Lewis Research Center Noise Exposure Management Program seeks to limit employee noise exposure and maintain community acceptance for critical research while actively pursuing engineered controls for noise generated by more than 100 separate research facilities and the associated services required for their operation.

  8. Ambient Noise Tomography of Southern California Images Dipping San Andreas-Parallel Structure and Low-Velocity Salton Trough Mantle

    Science.gov (United States)

    Barak, S.; Klemperer, S. L.; Lawrence, J. F.

    2014-12-01

    Ambient noise tomography (ANT) images the entire crust but does not depend on the spatial and temporal distribution of events. Our ANT high-resolution 3D velocity model of southern California uses 849 broadband stations, vastly more than previous studies, and four years of data, 1997-1998, 2007, and 2011, chosen to include our own broadband Salton Seismic Imaging Project, a 40-station transect across the Salton Trough, as well as other campaign stations in both Mexico and the U.S.A., and permanent stations. Our shear-wave model has 0.05° x 0.05° lateral and 1 km vertical blocks. We used the Harvard Community Velocity Model (CVM-H) as the initial model for the inversion. We show significant differences relative to the CVM-H model, especially in the lower crust and upper mantle. We observe prominent low-velocity anomalies in the upper mantle under the Salton Buttes and Cerro Prieto geothermal fields, indicating high-temperatures and possibly partial-melt. Similar low-velocity zones have been previously observed along the Gulf of California. We also observe vertical to gradually dipping lateral velocity contrasts in the lower crust under the southern part of the San Andreas Fault. The east to northeast dip may represent crustal fabric sheared by movement of the Pacific plate under the North American plate prior to the initiation of transform motion.

  9. Comparison between two methods for forward calculation of ambient noise H/V spectral ratios

    Science.gov (United States)

    Garcia-Jerez, A.; Luzón, F.; Sanchez-Sesma, F. J.; Santoyo, M. A.; Albarello, D.; Lunedei, E.; Campillo, M.; Iturrarán-Viveros, U.

    2011-12-01

    The analysis of horizontal-to-vertical spectral ratios of ambient noise (NHVSR) is a valuable tool for seismic prospecting, particularly if both a dense spatial sampling and a low-cost procedure are required. Unfortunately, the computation method still lacks of a unanimously accepted theoretical basis and different approaches are currently being used for inversion of the ground structure from the measured H/V curves. Two major approaches for forward calculation of NHVSRs in a layered medium are compared in this work. The first one was developed by Arai and Tokimatsu (2004) and recently improved by Albarello and Lunedei (2011). It consists of a description of the wavefield as generated by Far Surface point Forces (FSF method). The second one is based on the work of Sánchez-Sesma et al. (2011) who consider ambient noise as a Diffuse WaveField (DWF method), taking advantage of the proportionality between its Fourier-transformed autocorrelation (power spectrum) and the imaginary part of the Green function when source and receiver are the same. In both methods, the NHVSR is written as (PH/PV)1/2, where PH and PV are the horizontal and vertical power spectra. In the FSF method these quantities are given by PV∝⊙m(1+1/2χm2α2)(ARm/kRm)2 PH∝⊙m{(1+1/2χm2α2)(ARm/kRm)2χm2+1/2α2(ALm/kLm)2} where kRm, χm and ARm are wavenumber, ellipticity and medium response of the m-th Rayleigh wave mode; kLm and ALm correspond to the m-th Love wave mode and α is the horizontal-to-vertical load ratio of the ambient noise sources. Some common factors are omitted in the expressions of PV and PH. On the other hand, the DWF method deals with the full wavefield including both surface and body waves. In order to make the comparison easier, and taking into account that surface waves are often the dominant components in wide spectral ranges, body wave contributions are neglected here. In this case, the PH and PV power spectra for the DWF method are reduced to the simple expressions: PV

  10. Two-receiver measurements of phase velocity: cross-validation of ambient-noise and earthquake-based observations

    Science.gov (United States)

    Kästle, Emanuel D.; Soomro, Riaz; Weemstra, Cornelis; Boschi, Lapo; Meier, Thomas

    2016-12-01

    Phase velocities derived from ambient-noise cross-correlation are compared with phase velocities calculated from cross-correlations of waveform recordings of teleseismic earthquakes whose epicentres are approximately on the station-station great circle. The comparison is conducted both for Rayleigh and Love waves using over 1000 station pairs in central Europe. We describe in detail our signal-processing method which allows for automated processing of large amounts of data. Ambient-noise data are collected in the 5-80 s period range, whereas teleseismic data are available between about 8 and 250 s, resulting in a broad common period range between 8 and 80 s. At intermediate periods around 30 s and for shorter interstation distances, phase velocities measured from ambient noise are on average between 0.5 per cent and 1.5 per cent lower than those observed via the earthquake-based method. This discrepancy is small compared to typical phase-velocity heterogeneities (10 per cent peak-to-peak or more) observed in this period range.We nevertheless conduct a suite of synthetic tests to evaluate whether known biases in ambient-noise cross-correlation measurements could account for this discrepancy; we specifically evaluate the effects of heterogeneities in source distribution, of azimuthal anisotropy in surface-wave velocity and of the presence of near-field, rather than far-field only, sources of seismic noise. We find that these effects can be quite important comparing individual station pairs. The systematic discrepancy is presumably due to a combination of factors, related to differences in sensitivity of earthquake versus noise data to lateral heterogeneity. The data sets from both methods are used to create some preliminary tomographic maps that are characterized by velocity heterogeneities of similar amplitude and pattern, confirming the overall agreement between the two measurement methods.

  11. Surface-wave tomography of Ireland and surroundings using ambient noise and teleseismic data

    Science.gov (United States)

    Bonadio, Raffaele; Arroucau, Pierre; Lebedev, Sergei; Meier, Thomas; Schaeffer, Andrew; Licciardi, Andrea; Piana Agostinetti, Nicola

    2016-04-01

    Ireland's geology is dominated by northeast-southwest structural trends and suture zones, mostly inferred from geological mapping and a few active source seismic experiments. However, their geometry and extent at depth and their continuity across the Irish Sea are still poorly known. Important questions also remain unanswered regarding the thickness and bulk properties of the sedimentary cover at the regional scale, the deformation and flow of the deep crust during the formation of Ireland, the thickness of Ireland's lithosphere today, and the thermal structure and dynamics of the asthenosphere beneath Ireland. In this work, we take advantage of abundant, newly available broadband data from temporary array deployments and permanent seismic networks in Ireland and Great Britain to produce high-resolution models of seismic velocity structure and anisotropy of the lithosphere. We combine Rayleigh and Love phase velocity measurements from waveform cross-correlation using both ambient noise and teleseismic data in order to produce high-quality dispersion curves for periods ranging from 1 to 300 s. The phase velocity measurement procedures are adapted from Meier et al.[2], Lebedev et al.[1] and Soomro et al.[3] and are automated in order to deal with the large amount of data and ensure consistency and reproducibility. For the nearly 200 stations used in this study, we obtain a very large number of dispersion curves from both ambient noise and teleseimic data. Dispersion measurements are then inverted in a tomographic procedure for surface-wave phase velocity maps in a very broad period range. The maps constrain the 3D seismic-velocity structure of the crust and upper mantle underlying Ireland and the Irish Sea. {9} Lebedev, S., T. Meier, R. D. van der Hilst. Asthenospheric flow and origin of volcanism in the Baikal Rift area, Earth Planet. Sci. Lett., 249, 415-424, 2006. Meier, T., K. Dietrich, B. Stockhert, H.P. Harjes, One-dimensional models of shear wave velocity for

  12. Towards Crustal Structure of Java Island (Sunda Arc) from Ambient Seismic Noise Tomography

    Science.gov (United States)

    Widiyantoro, Sri; Zulhan, Zulfakriza; Martha, Agustya; Saygin, Erdinc; Cummins, Phil

    2015-04-01

    In our previous studies, P- and S-wave velocity structures beneath the Sunda Arc were successfully imaged using a global data set and a nested regional-global tomographic method was employed. To obtain more detailed P- and S-wave velocity structures beneath Java, in the central part of the Sunda Arc, we then used local data sets, i.e. newline from the MErapi AMphibious EXperiment (MERAMEX) and the Meteorological, Climatological and Geophysical Agency (MCGA), as well as employed a double-difference technique for tomographic imaging. The results of the imaging show e.g. that P- and S-wave velocities are significantly reduced in the uppermost mantle beneath central Java. In order to obtain detailed crustal structure information beneath Java, the Ambient Noise Tomography (ANT) method was used. The application of this method to the MERAMEX data has produced a good crustal model beneath central Java. We continue our experiment to image crustal structure of eastern Java. We have used seismic waveform data recorded by 22 MCGA stationary seismographic stations and 25 portable seismographs installed for 2 to 8 weeks. The data were processed to obtain waveforms of cross-correlated noise between pairs of seismographic stations. Our preliminary results presented here indicate that the Kendeng zone, an area of low gravity anomaly, is associated with a low velocity zone. On the other hand, the southern mountain range, which has a high gravity anomaly, is related to a high velocity anomaly (as shown by our tomographic images). In future work we will install more seismographic stations in eastern Java as well as in western Java to conduct ANT imaging for the whole of Java Island. The expected result combined with the mantle velocity models resulting from our body wave tomography will allow for accurate location of earthquake hypocenters and determination of regional tectonic structures. Both of these are valuable for understanding seismic hazard in Java, the most densely populated

  13. Ambient Noise Imaging of Menengai Caldera in the Central Kenya Dome

    Science.gov (United States)

    Patlan, E.; Wamalwa, A.; Kaip, G.; Velasco, A. A.

    2012-12-01

    The Geothermal Development Company (GDC) and the University of Texas at El Paso (UTEP) have deployed fourteen seismic stations around the Menengai geothermal field along the Kenya rift system to monitor the seismicity around the Menengai Caldera. The goal of the project is to identify active faults and fracture systems that may contain hydrothermal fluids and favorable drilling targets, plus image the magma chamber. The deployment has a variety of seismic sensors with different frequency responses, and the instruments where deployed in two stages, with seven stations recording continuously since Mar. 2011, and another seven stations being deployed in Aug. 2011. We use vertical component waveform data from Mar. 2011 to Mar. 2012 to image the caldera using ambient noise tomography. We first cut waveform data every 5 hours recorded at single seismic station, applying a 1-bit normalization to eliminate earthquake signals and any instrumentation irregularities. We also apply spectral whitening in order to flatten the spectrum to minimize the source contamination. We cross-correlate waveforms to retrieve the Green's functions for all combinations of stations within our seismic network, accounting for different frequency responses, given the different sensors frequency responses (Guralp 3T's and 40Ts). We introduce a period cut-off in which it is acceptable for closely spaced station-pairs to have inter-station distance greater than ~3 wavelengths. This avoids deterioration of the cross correlation result. We compute signal-to-noise-ratios (SNR) of the cross-correlation to determine the quality of the data, where the SNR is defined as the peak amplitude divided by the root-mean-square noise in the window. The computed cross-correlations were stacked in 3-month bins to account for seasonal variability in order to estimate the group velocity uncertainties at each period. We used Frequency Time Analysis (FTAN) and a match filter analysis (MTA) in order to approximate the

  14. Ambient noise H/V spectral ratio in site effects estimation in Fateh jang area, Pakistan

    Institute of Scientific and Technical Information of China (English)

    S.M.Talha Qadri; Bushra Nawaz; S.H.Sajjad; Riaz Ahmad Sheikh

    2015-01-01

    Local geology or local site effect is a crucial component while conducting seismic risk assessment studies.Investigations made by utilization of ambient noise are an effective tool for local site estimation.The present study is conducted to perform site response analysis at 13 different sites within urban settlements of Fateh jang area (Pakistan).The aim of this study was achieved by utilizing Nakamura method or H/V spectral ratio method.Some important local site parameters,e.g.,the fundamental frequencies f0 of soft sediments,amplitudes A0 of corresponding H/V spectral ratios,and alluvium thicknesses over 13 sites within the study area,were measured and analyzed.The results show that the study area reflects low fundamental frequency f0.The fundamental frequencies of the sediments are highly variable and lie in a range of 0.6-13.0 Hz.Similarly,amplification factors at these sites are in the range of 2.0-4.0.

  15. Complex deformation in the Caucasus region revealed by ambient noise seismic tomography

    Science.gov (United States)

    Legendre, Cédric P.; Tseng, Tai-Lin; Chen, Ying-Nien; Huang, Tzu-Ying; Gung, Yuan-Cheng; Karakhanyan, Arkadiy; Huang, Bor-Shouh

    2017-08-01

    Cross-correlation of 3years of ambient seismic noise recorded at 35 seismic stations deployed in Caucasus region yields hundreds of short-period surface-wave phase-speed dispersion curves on inter-station paths. We inverted these measurements using two techniques to construct tomographic images of the principal geological units of Caucasus. High-resolution isotropic and azimuthally anisotropic phase-velocity maps (at periods between 5 and 20s) and shear-velocity tomographic maps between 5 and 30km are generated. The resulting maps show a velocity dichotomy between the Caucasus region and the surrounding that is interpreted in term of changes in crustal thickness. There is also a strong dichotomy in the anisotropic pattern between the eastern part and the western part of the Caucasus. This difference in both amplitudes and directions of the 2ψ anisotropy is linked to the tectonic regime changes in the region. These observations suggest a good correlation between the tomographic models and the geology of the region. It was also possible to identify the early stage of the indentation of the Arabian Plate into the Eurasian plate, as well as to detect the possible magma chamber responsible for the Javakheti highland.

  16. Geological structure of central Java, Indonesia from ambient seismic noise tomography

    Science.gov (United States)

    Zulhan, Z.; Saygin, E.; Cummins, P. R.; Widiyantoro, S.; Nugraha, A. D.

    2012-12-01

    Geological structure in the region of central Java is very important for understanding its tectonic setting. The presence of several active volcanoes such as Mt. Merapi, Mt. Sumbing and Mt. Lawu, as well as the Kendeng Basin and Opak fault all contribute to the complex geology of central Java. Understanding some of the characteristics of the geological structure can be improved using a geophysical approach such as seismic tomography. In this study we show the image of the subsurface in central Java obtained from ambient seismic noise tomography. We use simultaneously operated 134 short period and broadband seismometers from the Merapi Amphibious Experiment (MERAMEX) network covering a region of 150 x 200 km around central Java and Yogyakarta. More than 5000 Rayleigh wave component of the Green's function are extracted from cross-correlations of available station pairs. We filter the retrieved Green's functions with a phase-matched filter to measure Rayleigh wave group dispersion at periods between 0.5 and 20 s. We apply a 2-D nonlinear iterative tomographic method for inverting the measured travel times. The results are then used to create group velocity perturbation maps. The velocity perturbation maps show a high correlation with local tectonic features. The Kendeng basin and active volcanoes in the central part of central Java are clearly imaged with lower group velocities and the southern part has the carbonate region is marked with higher group velocities.

  17. Tomographic Imaging of Jakarta Area from Cross-correlation of Seismic Ambient Noise

    Science.gov (United States)

    Pranata, B.; Saygin, E.; Cummins, P. R.; Widiyantoro, S.; Nugraha, A. D.; Harjadi, P.; Suhardjono, S.

    2012-12-01

    Seismic imaging of sediment thickness of Jakarta is crucial where Jakarta city is currently being rapidly developed with major installations and high-rise structures being constructed at a fast pace. Therefore, information of surface geology and surface sediment thickness for Jakarta city is urgently required in order to mitigate the effects of earthquake hazards in the future. Because of this need, we deployed 36 broadband and shortperiod stations across Jakarta to record seismic ambient noise. We apply cross-correlation method to the simultaneously recorded data to retrieve interstation Green's functions. We measure group velocity dispersion of the retrieved Green's functions by applying narrowband filters. Dispersion measurements are then inverted with a nonlinear tomographic technique to image the shallow structure of Jakarta and its surrounding regions. Preliminary results from tomographic maps show low velocities dominantly located in central, west and north Jakarta. While the highest rate obtained is between stations in South Jakarta. This conforms with the known geological conditions in which the structure of sedimentary cover in northern Jakarta is thicker than the southern part.

  18. Upper crustal structure beneath East Java from ambient noise tomography: A preliminary result

    Science.gov (United States)

    Martha, Agustya Adi; Widiyantoro, Sri; Cummins, Phil; Saygin, Erdinc; Masturyono

    2015-04-01

    East Java has a fairly complex geological structure. Physiographically East Java can be divided into three zones, i.e. the Southern Mountains zone in the southern part, the Kendeng zone in the middle part, and the Rembang zone in the northern part. Most of the seismic hazards in this region are due to processes in the upper crust. In this study, the Ambient Noise Tomography (ANT) method is used to image the upper crustal structure beneath East Java. We have used seismic waveform data recorded by 8Meteorological, Climatological and Geophysical Agency (BMKG) stationary seismographic stations and 16 portable seismographs installed for 2 to 8 weeks. The data were processed to obtain waveforms fromnoise cross-correlation between pairs of seismographic stations. Our preliminary results indicate that the Kendeng zone, an area of low gravity anomaly, is associated with a low velocity zone. On the other hand, the southern mountain range, which has a high gravity anomaly, is related to a high velocity anomaly as shown by our tomographic images.

  19. ambiental

    Directory of Open Access Journals (Sweden)

    Roque Leal Salcedo

    2008-01-01

    Full Text Available El derecho internacional ambiental es un conocimiento de carácter transversal, que entre otras consideraciones refleja las preocupaciones de la sociedad por la implementación de un modelo de desarrollo sustentable para el respeto a las reglas del medio natural que garantizan la integridad y renovación de los sistemas naturales. El presente artículo enfoca esta visión a través del análisis de material documental revisado, entre ellos tratados internacionales que permiten distinguir el desarrollo del derecho internacional ambiental y el papel de Organización de las Naciones Unidas (ONU, en el propósito común del derecho individual y colectivo de disfrutar de una vida, un ambiente seguro, sano y ecológicamente equilibrado. En función a estas disertaciones las consideraciones finales exponen parte de la visión que ha estructurado la ONU y que representan un aporte considerable en el fomento de la conciencia mundial sobre la necesidad de establecer vínculos entre las naciones para el continuo desarrollo de esta rama del derecho.

  20. An investigation of community noise in high-rise residential environments.

    Science.gov (United States)

    Alam, Sheikh Mahbub; Eang, Lee Siew; Tan, Alan; Tiong, Tan Sze

    2010-06-01

    High-rise dwellers in Singapore are often subjected to several community noise sources in close proximity. These include food center, children playground, soccer playground, basketball playground, waste disposal truck, etc. A scientific and reliable approach is required for evaluation of the community noise and its impact on high-rise dwellers. A comprehensive noise survey by a cluster sampling technique, conducted among 522 households in five residential towns in Singapore, showed that community noise was one of the prime sources of noise in a high-rise residential environment. From a subjective noise survey, undertaken concurrent with objective noise measurements, a mean outdoor noise level of 59 dBA was established as an acceptable noise level in the indoor environment. To investigate the level of noise exposure from different community noise sources, software modeling and simulations were carried out. The predicted results were validated with field measured data at five 16 story residential buildings. Analysis of noise exposure data showed that except for waste disposal truck, noise exposure due to other community noise sources (building distance of 15 m) were within the established acceptable noise level. A factor analysis of the survey data identified the key factors related to the disturbance due to community noise sources.

  1. Joint inversion of teleseismic and ambient noise Rayleigh waves for phase velocity maps, an application to Iceland

    Science.gov (United States)

    Harmon, Nicholas; Rychert, Catherine A.

    2016-08-01

    We present a method for joint inversion of teleseismic and ambient noise Rayleigh wave data for phase velocity maps from 18 to 50 s period. We adapt the two-plane wave method for teleseismic data to include ambient noise phase data. We apply the method to data from Iceland's ICEMELT and HOTSPOT arrays. Checkerboard tests show that the joint inversion improves phase velocity model recovery over methods that use the data sets independently, particularly at 18 s period. The addition of ambient noise data also extends resolution to shallower depths and shorter periods in comparison to previous teleseismic results beneath Iceland. We show there are significant differences in the phase velocity maps from the joint approach in comparison to other approaches, for instance, using only teleseismic data, only ambient noise data, or the mean of the two. The difference in phase velocities in turn affects the resulting shear velocity models. The advantage of the joint inversion is that it produces a single phase velocity map that satisfies both data sets simultaneously. Our phase velocity maps show a transition from low velocities centered beneath the main volcanic centers in Iceland at 18-25 s period, primarily crustal depths, to a low-velocity region that traces the rift zones from the Reykjanes Ridge in the south to the Kolbeinsey Ridge in the north at 29-50 s period, greater depths. These results are consistent with previous studies, although with an extended and improved region of resolution, which extends further into the Atlantic and Arctic Ocean.

  2. Seismic anisotropy and heterogeneity in the crust beneath southeast Australia from ambient noise tomography

    Science.gov (United States)

    Rawlinson, N.; Arroucau, P.; Young, M.; Salmon, M.; Kennett, B. L. N.

    2012-04-01

    The lithosphere beneath eastern Australia was formed during a protracted period of Palaeozoic orogeny that began in the Early Cambrian and terminated in the Middle Triassic. Accretion of new and reworked lithosphere occurred outboard of the proto-Pacific margin of Gondwana, which at that time extended some 20,000 km along the east margin of Precambrian Australia, through west Antarctica and into western Argentina. In southeast Australia, the outward-stepping nature of the accretion can be observed in the Delamerian, Lachlan and New England orogens, which extend from the eastern margin of Precambrian Australia to the Tasman Sea. Although the basic building blocks of the region have been recognised, extensive Mesozoic and Cainozoic cover sequences have masked large regions of the Palaeozoic basement, which complicates the task of unravelling the tectonic evolution of this portion of the Australian plate. Over the last 14 years, a transportable seismic array project called WOMBAT has traversed much of southeast Australia with high density seismic arrays. To date, over 600 stations have been deployed as part of 14 separate array movements, making it the largest experiment of its type in the southern hemisphere. With a maximum station spacing of approximately 50 km, passive imaging of the crust and uppermost mantle is possible using a variety of techniques, including ambient noise tomography, which is the focus of this study. Interstation group and phase velocity curves corresponding to Rayleigh wave propagation have been extracted from ambient seismic noise recorded by WOMBAT. Group and phase velocity maps over a range of periods (1-20 seconds) are then constructed by traveltime inversion using all available station pairs. Two different approaches are used: the first assumes isotropic velocity variations but accounts for wavefront focusing and defocusing in response to heterogeneity; the second assumes great circle path propagation but accounts for azimuthal anisotropy

  3. Stream ambient noise, spectrum and propagation of sounds in the goby Padogobius martensii: sound pressure and particle velocity.

    Science.gov (United States)

    Lugli, Marco; Fine, Michael L

    2007-11-01

    The most sensitive hearing and peak frequencies of courtship calls of the stream goby, Padogobius martensii, fall within a quiet window at around 100 Hz in the ambient noise spectrum. Acoustic pressure was previously measured although Padogobius likely responds to particle motion. In this study a combination pressure (p) and particle velocity (u) detector was utilized to describe ambient noise of the habitat, the characteristics of the goby's sounds and their attenuation with distance. The ambient noise (AN) spectrum is generally similar for p and u (including the quiet window at noisy locations), although the energy distribution of u spectrum is shifted up by 50-100 Hz. The energy distribution of the goby's sounds is similar for p and u spectra of the Tonal sound, whereas the pulse-train sound exhibits larger p-u differences. Transmission loss was high for sound p and u: energy decays 6-10 dB10 cm, and sound pu ratio does not change with distance from the source in the nearfield. The measurement of particle velocity of stream AN and P. martensii sounds indicates that this species is well adapted to communicate acoustically in a complex noisy shallow-water environment.

  4. Crustal structure of southern Madagascar from receiver functions and ambient noise correlation: Implications for crustal evolution

    Science.gov (United States)

    Rindraharisaona, E. J.; Tilmann, F.; Yuan, X.; Rümpker, G.; Giese, J.; Rambolamanana, G.; Barruol, G.

    2017-02-01

    The Precambrian rocks of Madagascar were formed and/or modified during continental collision known as the Pan-African orogeny. Aborted Permo-Triassic Karoo rifting and the subsequent separation from Africa and India resulted in the formation of sedimentary basins in the west and volcanic activity predominantly along the margins. Many geological studies have documented the imprint of these processes, but little was known about the deeper structure. We therefore deployed seismic stations along an SE-NW trending profile spanning nearly all geological domains of southern Madagascar. Here we focus on the crustal structure, which we determined based on joint analysis of receiver functions and surface waves derived from ambient noise measurements. For the sedimentary basin we document a thinning of the underlying crystalline basement by up to ˜60% to 13 km. The crustal velocity structure demonstrates that the thinning was accomplished by removal or exhumation of the lower crust. Both the Proterozoic and Archean crust have a 10 km thick upper crust and 10-12 km thick midcrust. However, in contrast to the typical structure of Proterozoic and Archean aged crust, the Archean lower crust is thicker and faster than the Proterozoic one, indicating possible magmatic intrusions; an underplated layer of 2-8 km thickness is present only below the Archean crust. The Proterozoic mafic lower crust might have been lost during continental collision by delamination or subduction or thinned as a result of extensional collapse. Finally, the Cretaceous volcanics along the east coast are characterized by thin crust (30 km) and very large VP/VS ratios.

  5. Insights into seasonal active layer dynamics by monitoring relative velocity changes using ambient seismic noise

    Science.gov (United States)

    James, S. R.; Knox, H. A.; Cole, C. J.; Abbott, R. E.; Screaton, E.

    2016-12-01

    Seasonal freeze and thaw of the active layer above permafrost results in dramatic changes in seismic velocity. We used daily cross correlations of ambient seismic noise recorded at Poker Flat Research Range in central Alaska to create a nearly continuous 2-year record of relative velocity changes. This analysis required that we modify the Moving Window Cross-spectral Analysis technique used in the Python package MSNoise to reduce the occurrence of cycle skipping. Results show relative velocity variations follow a seasonal pattern, where velocities decrease in late spring through the summer months and increase through the fall and winter months. This timing is consistent with active layer freeze and thaw in this region. These results were compared to a suite of ground- and satellite-based measurements to identify relationships. A decrease in relative velocities in late spring closely follows the timing of snow melt recorded in nearby ground temperatures and snow-depth logs. This transition also aligns with a decrease in the Normalized Difference Snow Index (NDSI) derived from multi-temporal Landsat 8 satellite imagery collected over the study site. A gradual increase in relative velocity through the fall months occurs when temperatures below ground surface remain near zero. We suggest this is due to latent heat feedbacks that keep temperatures constant while active layer velocities increase from continued ice formation. This highlights the value in velocity variations for capturing details on the freezing process. In addition, spatial variations in the magnitude of velocity changes are consistent with thaw probe surveys. Exploring relationships with remote sensing may allow indirect measurements of thaw over larger areas and further surface wave analysis may allow for thickness evolution measurements. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for

  6. Continent-arc collision in the Banda Arc imaged by ambient noise tomography

    Science.gov (United States)

    Porritt, Robert W.; Miller, Meghan S.; O'Driscoll, Leland J.; Harris, Cooper W.; Roosmawati, Nova; Teofilo da Costa, Luis

    2016-09-01

    The tectonic configuration of the Banda region in southeast Asia captures the spatial transition from subduction of Indian Ocean lithosphere to subduction and collision of the Australian continental lithosphere beneath the Banda Arc. An ongoing broadband seismic deployment funded by NSF is aimed at better understanding the mantle and lithospheric structure in the region and the relationship of the arc-continent collision to orogenesis. Here, we present results from ambient noise tomography in the region utilizing this temporary deployment of 30 broadband instruments and 39 permanent stations in Indonesia, Timor Leste, and Australia. We measure dispersion curves for over 21,000 inter-station paths resulting in good recovery of the velocity structure of the crust and upper mantle beneath the Savu Sea, Timor Leste, and the Nusa Tenggara Timur (NTT) region of Indonesia. The resulting three dimensional model indicates up to ∼25% variation in shear velocity throughout the plate boundary region; first-order velocity anomalies are associated with the subducting oceanic lithosphere, subducted Australian continental lithosphere, obducted oceanic sediments forming the core of the island of Timor, and high velocity anomalies in the Savu Sea and Sumba. The structure in Sumba and the Savu Sea is consistent with an uplifting forearc sliver. Beneath the island of Timor, we confirm earlier inferences of pervasive crustal duplexing from surface mapping, and establish a link to underlying structural features in the lowermost crust and uppermost mantle that drive upper crustal shortening. Finally, our images of the volcanic arc under Flores, Wetar, and Alor show high velocity structures of the Banda Terrane, but also a clear low velocity anomaly at the transition between subduction of oceanic and continental lithosphere. Given that the footprint of the Banda Terrane has previously been poorly defined, this model provides important constraints on tectonic reconstructions that

  7. Ice shelf structure derived from dispersion curve analysis of ambient seismic noise, Ross Ice Shelf, Antarctica

    Science.gov (United States)

    Diez, A.; Bromirski, P. D.; Gerstoft, P.; Stephen, R. A.; Anthony, R. E.; Aster, R. C.; Cai, C.; Nyblade, A.; Wiens, D. A.

    2016-05-01

    An L-configured, three-component short period seismic array was deployed on the Ross Ice Shelf, Antarctica during November 2014. Polarization analysis of ambient noise data from these stations shows linearly polarized waves for frequency bands between 0.2 and 2 Hz. A spectral peak at about 1.6 Hz is interpreted as the resonance frequency of the water column and is used to estimate the water layer thickness below the ice shelf. The frequency band from 4 to 18 Hz is dominated by Rayleigh and Love waves propagating from the north that, based on daily temporal variations, we conclude were generated by field camp activity. Frequency-slowness plots were calculated using beamforming. Resulting Love and Rayleigh wave dispersion curves were inverted for the shear wave velocity profile within the firn and ice to ˜150 m depth. The derived density profile allows estimation of the pore close-off depth and the firn-air content thickness. Separate inversions of Rayleigh and Love wave dispersion curves give different shear wave velocity profiles within the firn. We attribute this difference to an effective anisotropy due to fine layering. The layered structure of firn, ice, water and the seafloor results in a characteristic dispersion curve below 7 Hz. Forward modelling the observed Rayleigh wave dispersion curves using representative firn, ice, water and sediment structures indicates that Rayleigh waves are observed when wavelengths are long enough to span the distance from the ice shelf surface to the seafloor. The forward modelling shows that analysis of seismic data from an ice shelf provides the possibility of resolving ice shelf thickness, water column thickness and the physical properties of the ice shelf and underlying seafloor using passive-source seismic data.

  8. Crustal structure of the Newer Volcanics Province, SE Australia, from ambient noise tomography

    Science.gov (United States)

    Jiang, Chengxin; Yang, Yingjie; Rawlinson, Nicholas; Griffin, William L.

    2016-06-01

    Intraplate volcanism is a widespread phenomenon, and is generally regarded to be independent of plate tectonics. The Newer Volcanics Province (NVP) of SE Australia represents the most recent (and arguably still active) intraplate volcanism on the Australian continent, and has been postulated to originate from the combined effect of localized shear flow and edge-driven convection. In this study, we adopt ambient noise tomography and Monte-Carlo inversion methods to construct the first local-scale 3D crustal Vs model of the NVP region with a resolution of 35 km. The model displays distinct crustal velocity features near the eastern and western margins of the NVP, which may point to the existence of a lithosphere-scale plumbing system for the migration of melt associated with the boundary between the Delamerian Orogen and the Lachlan Orogen, which underlies the NVP. In particular, exceptionally high velocities are observed in the middle crust of the Delamerian Orogen, and are best explained by buried magmatic arcs. This interpretation is consistent with a subduction-accretion origin for the Delamerian Orogen. Trans-lithospheric faults might have developed during the accretion processes, providing possible pathways for the migration of NVP magmas to the crust and surface. Our 3D model also images small localized velocity reductions in the lower crust at the region where the two distinct lithospheric units meet. The low velocity zone is spatially correlated with the top of a prominent lithosphere-scale low-resistivity zone (10-30 Ωm), which we interpret to represent intruded magmatic sills with small proportions of melt remaining.

  9. Full-wave Ambient Noise Tomography of Mt Rainier volcano, USA

    Science.gov (United States)

    Flinders, Ashton; Shen, Yang

    2015-04-01

    Mount Rainier towers over the landscape of western Washington (USA), ranking with Fuji-yama in Japan, Mt Pinatubo in the Philippines, and Mt Vesuvius in Italy, as one of the great stratovolcanoes of the world. Notwithstanding its picturesque stature, Mt Rainier is potentially the most devastating stratovolcano in North America, with more than 3.5 million people living beneath is shadow in the Seattle-Tacoma area. The primary hazard posed by the volcano is in the form of highly destructive debris flows (lahars). These lahars form when water and/or melted ice erode away and entrain preexisting volcanic sediment. At Mt Rainier these flows are often initiated by sector collapse of the volcano's hydrothermally rotten flanks and compounded by Mt Rainier's extensive snow and glacial ice coverage. It is therefore imperative to ascertain the extent of the volcano's summit hydrothermal alteration, and determine areas prone to collapse. Despite being one of the sixteen volcanoes globally designated by the International Association of Volcanology and Chemistry of the Earth's Interior as warranting detailed and focused study, Mt Rainier remains enigmatic both in terms of the shallow internal structure and the degree of summit hydrothermal alteration. We image this shallow internal structure and areas of possible summit alteration using ambient noise tomography. Our full waveform forward modeling includes high-resolution topography allowing us to accuratly account for the effects of topography on the propagation of short-period Rayleigh waves. Empirical Green's functions were extracted from 80 stations within 200 km of Mt Rainier, and compared with synthetic greens functions over multiple frequency bands from 2-28 seconds.

  10. Theory of the directionality and spatial coherence of wind-driven ambient noise in a deep ocean with attenuation.

    Science.gov (United States)

    Buckingham, Michael J

    2013-08-01

    Acoustic attenuation in seawater usually has little effect on the spatial statistics of ambient noise in the ocean. This expectation does not hold, however, at higher frequencies, above 10 kHz, and extreme depths, in excess of 6 km, an operating regime that is within the capabilities of the most recently developed acoustic instrument platforms. To quantify the effects of attenuation, theoretical models for the vertical directionality and the spatial coherence of wind-generated ambient noise are developed in this paper, based on a uniform distribution of surface sources above a semi-infinite, homogeneous ocean. Since there are no bottom reflections, all the noise is downward traveling; and the angular width of the directional density function becomes progressively narrower with increasing frequency because sound from the more distant sources experiences greater attenuation than acoustic arrivals from overhead. This narrowing of the noise lobe modifies the spatial coherence, shifting the zeros in the horizontal (vertical) coherence function to higher (lower) frequencies. In addition, the attenuation modifies the amplitudes of the higher-order oscillations in the horizontal and vertical coherence functions, tending to suppress the former and enhance the latter. These effects are large enough to be detectable with the latest deep-diving sensor technology.

  11. Association of long-term exposure to community noise and traffic-related air pollution with coronary heart disease mortality.

    Science.gov (United States)

    Gan, Wen Qi; Davies, Hugh W; Koehoorn, Mieke; Brauer, Michael

    2012-05-01

    In metropolitan areas, road traffic is a major contributor to ambient air pollution and the dominant source of community noise. The authors investigated the independent and joint influences of community noise and traffic-related air pollution on risk of coronary heart disease (CHD) mortality in a population-based cohort study with a 5-year exposure period (January 1994-December 1998) and a 4-year follow-up period (January 1999-December 2002). Individuals who were 45-85 years of age and resided in metropolitan Vancouver, Canada, during the exposure period and did not have known CHD at baseline were included (n = 445,868). Individual exposures to community noise and traffic-related air pollutants, including black carbon, particulate matter less than or equal to 2.5 μm in aerodynamic diameter, nitrogen dioxide, and nitric oxide, were estimated at each person's residence using a noise prediction model and land-use regression models, respectively. CHD deaths were identified from the provincial death registration database. After adjustment for potential confounders, including traffic-related air pollutants or noise, elevations in noise and black carbon equal to the interquartile ranges were associated with 6% (95% confidence interval: 1, 11) and 4% (95% confidence interval: 1, 8) increases, respectively, in CHD mortality. Subjects in the highest noise decile had a 22% (95% confidence interval: 4, 43) increase in CHD mortality compared with persons in the lowest decile. These findings suggest that there are independent effects of traffic-related noise and air pollution on CHD mortality.

  12. Variability in ambient noise levels and call parameters of North Atlantic right whales in three habitat areas.

    Science.gov (United States)

    Parks, Susan E; Urazghildiiev, Ildar; Clark, Christopher W

    2009-02-01

    The North Atlantic right whale inhabits the coastal waters off the east coasts of the United States and Canada, areas characterized by high levels of shipping and fishing activities. Acoustic communication plays an important role in the social behavior of these whales and increases in low-frequency noise may be leading to changes in their calling behavior. This study characterizes the ambient noise levels, including both natural and anthropogenic sources, and right whale upcall parameters in three right whale habitat areas. Continuous recordings were made seasonally using autonomous bottom-mounted recorders in the Bay of Fundy, Canada (2004, 2005), Cape Cod Bay, (2005, 2006), and off the coast of Georgia (2004-2005, 2006-2007). Consistent interannual trends in noise parameters were found for each habitat area, with both the band level and spectrum level measurements higher in the Bay of Fundy than in the other areas. Measured call parameters varied between habitats and between years within the same habitat area, indicating that habitat area and noise levels alone are not sufficient to predict variability in call parameters. These results suggest that right whales may be responding to the peak frequency of noise, rather than the absolute noise level in their environment.

  13. Assessment of ambient noise levels in the intensive care unit of a university hospital

    Directory of Open Access Journals (Sweden)

    Hatem O Qutub

    2009-01-01

    Conclusion : Some sources of environmental noise, such as the use of oxygen, suction equipment or respirators are unavoidable. Nevertheless, hospital ICUs should have measures to minimize the level of exposure to noise in the ICU. Further research in this area might focus on the noise level and other modifiable environmental stress factors in the ICU that affect patients as well as the staff.

  14. Combined effects of road traffic noise and ambient air pollution in relation to risk for stroke?

    DEFF Research Database (Denmark)

    Sørensen, Mette; Lühdorf, Pernille; Ketzel, Matthias

    2014-01-01

    Exposure to road traffic noise and air pollution have both been associated with risk for stroke. The few studies including both exposures show inconsistent results. We aimed to investigate potential mutual confounding and combined effects between road traffic noise and air pollution in association...... to 2009 were identified in national registers and road traffic noise and air pollution were modeled for all addresses. Analyses were done using Cox regression. A higher mean annual exposure at time of diagnosis of 10µg/m(3) nitrogen dioxide (NO2) and 10dB road traffic noise at the residential address...... was found for combination of high noise and high NO2 (IRR=1.28; 95% CI=1.09-1.52). Fatal stroke was positively associated with air pollution and not with traffic noise. In conclusion, in mutually adjusted models road traffic noise and not air pollution was associated ischemic stroke, while only air...

  15. Ambient Noise Cross-Correlation in the Eastern Tennessee Seismic Zone (United States)

    Science.gov (United States)

    Kuponiyi, A. P.; Arroucau, P.; Vlahovic, G.; Yongan, T.; Vlahovic, B.

    2011-12-01

    The Eastern Tennessee Seismic Zone (ETSZ) is an intraplate seismic region characterized by frequent but low magnitude earthquakes and is the second most active seismic area in the United States east of the Rocky Mountains. Since the middle of the seventies, the Center for Earthquake Research and Information (CERI) has installed and maintained several seismic networks in central and eastern United States. In this work, we use the continuous waveforms recorded at 24 short-period stations located in the vicinity of the eastern Tennessee seismic zone (ETSZ) and compute the cross-correlation function of the vertical component of the ambient noise wavefield for simultaneously recording station pairs. The resulting cross-correlograms are analysed by means of frequency-time analysis to extract Rayleigh wave group velocities that we subsequently use to compute Rayleigh wave tomographic maps of the region for periods ranging between 2 and 10 s, i.e. for periods sensitive to the structure of the upper crust. One key question in the ETSZ is the actual relationship between earthquake distribution and geological structure at depth. Seismicity is mostly confined in the Precambrian basement, below the Paleozoic cover of the southern Appalachian fold-and-thrust belt and shows little to no correlation with surface geological features. On the other hand, the earthquakes of the ETSZ clearly follow the trend of a feature observed on magnetic data: the New York-Alabama magnetic lineament (NYAL), a 1600-km long, northeast trending feature that is thought to be the expression of a major strike-slip fault affecting the Precambrian basement from the Mississippi embayment to the Green Mountains (northeast US). The actual extent at depth of this feature is not well established and is of primary interest to understand the seismicity of the ETSZ. By providing new information about the upper crustal structure of this region, this work is a contribution to the understanding of the seismic

  16. Impact of wind on ambient noise recorded by the "13 BB star" seismic array in northern Poland

    Science.gov (United States)

    Lepore, Simone; Markowicz, Krzysztof; Grad, Marek

    2016-04-01

    Seismic interferometry and beam forming techniques were applied to ambient noise recorded during January 2014 at the "13 BB star" array, composed of thirteen seismic stations located in northern Poland, with the aim of evaluating the azimuth of noise sources and the velocities of surface waves. After normalizing the raw recordings in time and frequency domain, the spectral characteristics of the ambient noise were studied to choose a frequency band suitable for the waves' retrieval. To get the velocity of surface waves by seismic interferometry, the crosscorrelation between all station pairs was analysed for the vertical and horizontal components in the 0.05-0.1 Hz, 0.1-1 Hz and 1 10 Hz frequency bands. For each pair, the crosscorrelation was applied to one hour recordings extracted from the ambient noise. The obtained traces were calculated for a complete day, and then summed together: the daily results were stacked for the whole January 2014. In the lowest frequency range, most of the energy is located around the 3.0 km/s line, meaning that the surface waves coming from the uppermost mantle will be retrieved. The intermediate frequency range shows most of the energy between the 2.0 km/s and 1.5 km/s lines: consequently, surface waves originating from the crust will be retrieved. In the highest frequency range, the surface waves are barely visible on the crosscorrelation traces, implying that the associated energy is strongly attenuated. The azimuth variation associated to the noise field was evaluated by means of the beam forming method, using the data from the whole array for all the three components. To that, the beam power was estimated in a small range of frequencies every day for the whole month. For each day, one hour long results of beam forming applications were stacked together. To avoid aliasing and near field effects, the minimum frequency was set at 0.05 Hz and the maximum to 0.1 Hz. In this frequency band, the amplitude maximum was sought

  17. Continuous H/V spectral ratio analysis of ambient noise: a necessity to understand microzonation results obtained by mobile stations

    Science.gov (United States)

    Van Noten, Koen; Lecocq, Thomas

    2016-04-01

    Estimating the resonance frequency (f0) and amplification factor of unconsolidated sediments by H/V spectral ratio (HVSR) analysis of seismic ambient noise has been widely used since Nakamura's proposal in 1989. To measure f0 properly, Nakamura suggested to perform microzonation surveys at night when the artificial microtremor is small and does not fully disrupt the ambient seismic noise. As nightly fieldwork is not always a reasonable demand, we propose an alternative workflow of Nakamura's technique to improve the quality of HVSR results obtained by ambient noise measurements of mobile stations during the day. This new workflow includes the automated H/V calculation of continuous seismic data of a stationary or permanent station installed near the microzonation site for as long as the survey lasts in order to control the error in the HVSR analysis obtained by the mobile stations. In this presentation, we apply this workflow on one year of seismic data at two different case studies; i.e. a rural site with a shallow bedrock depth of 30 m and an urban site (Brussels, capital of Belgium, bedrock depth of 110 m) where human activity is continuous 24h/day. By means of an automated python script, the fundamental peak frequency and the H/V amplitude are automatically picked from H/V spectra that are calculated from 50% overlapping, 30 minute windows during the whole year. Afterwards, the f0 and amplitude picks are averaged per hour/per day for the whole year. In both case studies, the H/V amplitude and the fundamental frequencies range considerable, up to ˜15% difference between the daily and nightly measurements. As bedrock depth is known from boreholes at both sites, we concluded that the nightly picked f0 is the true one. Our results thus suggest that changes in the determined f0 and H/V amplitude are dominantly caused by the human behaviour which is stored in the ambient seismic noise (e.g. later onset of traffic in a weekend, quiet Sundays, differences between

  18. A new approach to control noise from entertainment facilities: Active control and measurement of amplified community noise

    Science.gov (United States)

    Peppin, Richard J.; Casamajó, Joan

    2003-04-01

    While traffic noise is perhaps the most pervasive of community noises, much of the contribution now comes from amplified sound: live music, discos, theme parks, and exercise studios. Those producing the sound or music want it loud and those not interested want to be protected against noise. Noise limits at the receiving or producing property line must be met for the minimum community acceptance. However the time-, and perhaps the spatially-, varying sound in entertainment facilities is often constantly modified (and maybe monitored) near the source of the sound. Hence it is hard to relate and to control the sound at the property line. This paper presents a unique noise control device. It is based on the octave band ``transfer function'' between the sound produced in the entertainment area and the noise received at the property line. The overall insulation can be measured and is input to the instrument. When a noise level limit is exceeded at the receiver, due to the amplified interior noise at the facility, the sound output of the device is automatically controlled to reduce the noise. The paper provides details of the design and possible abatement scenarios with examples.

  19. Underwater Ambient Noise in a Baleen Whale Migratory Habitat Off the Azores

    Directory of Open Access Journals (Sweden)

    Miriam Romagosa

    2017-04-01

    Full Text Available Assessment of underwater noise is of particular interest given the increase in noise-generating human activities and the potential negative effects on marine mammals which depend on sound for many vital processes. The Azores archipelago is an important migratory and feeding habitat for blue (Balaenoptera musculus, fin (Balaenoptera physalus and sei whales (Balaenoptera borealis en route to summering grounds in northern Atlantic waters. High levels of low frequency noise in this area could displace whales or interfere with foraging behavior, impacting energy intake during a critical stage of their annual cycle. In this study, bottom-mounted Ecological Acoustic Recorders were deployed at three Azorean seamounts (Condor, Açores, and Gigante to measure temporal variations in background noise levels and ship noise in the 18–1,000 Hz frequency band, used by baleen whales to emit and receive sounds. Monthly average noise levels ranged from 90.3 dB re 1 μPa (Açores seamount to 103.1 dB re 1 μPa (Condor seamount and local ship noise was present up to 13% of the recording time in Condor. At this location, average contribution of local boat noise to background noise levels is almost 10 dB higher than wind contribution, which might temporally affect detection ranges for baleen whale calls and difficult communication at long ranges. Given the low time percentatge with noise levels above 120 dB re 1 μPa found here (3.3% at Condor, we woud expect limited behavioral responses to ships from baleen whales. Sound pressure levels measured in the Azores are lower than those reported for the Mediterranean basin and the Strait of Gibraltar. However, the currently unknown effects of baleen whale vocalization masking and the increasing presence of boats at the monitored sites underline the need for continuous monitoring to understand any long-term impacts on whales.

  20. Extracting the Group Velocity of Rayleigh Waves from the Cross Correlation of the Ambient Seismic Noise Between Two Seismic Stations

    Institute of Scientific and Technical Information of China (English)

    Jin Xing; Li Jun; Lin Shu; Zhou Zhengrong; Kang Lanchi; Ou Yiping

    2008-01-01

    This paper uses the 8 broad-band stations' microseism data recorded by the Seismic Monitoring Network of Fujian Province to calculate the vertical correlation coefficient between two stationsat intervals of 5 minutes. According to the time intervals technique we obtain the different coefficients and then add the correlative coefficients. Depending on this, we extract the group velocity of Rayleigh waves from the cross correlation of the ambient seismic noise between two seismic stations and figure out the group velocity' spatial distribution. The results show that the signal noise ratio (SNR) increases proportionally to the superposition times, but the results from different days are similar to one another. Synchronously, the arrival-time is also stable and there is no obvious change when coming across typhoons. It is found the velocity of the surface wave is 2.9~3. 1km/s in Fujian Province, which is close to the observationally attained value.

  1. Combined effects of road traffic noise and ambient air pollution in relation to risk for stroke?

    Science.gov (United States)

    Sørensen, Mette; Lühdorf, Pernille; Ketzel, Matthias; Andersen, Zorana J; Tjønneland, Anne; Overvad, Kim; Raaschou-Nielsen, Ole

    2014-08-01

    Exposure to road traffic noise and air pollution have both been associated with risk for stroke. The few studies including both exposures show inconsistent results. We aimed to investigate potential mutual confounding and combined effects between road traffic noise and air pollution in association with risk for stroke. In a population-based cohort of 57,053 people aged 50-64 years at enrollment, we identified 1999 incident stroke cases in national registries, followed by validation through medical records. Mean follow-up time was 11.2 years. Present and historical residential addresses from 1987 to 2009 were identified in national registers and road traffic noise and air pollution were modeled for all addresses. Analyses were done using Cox regression. A higher mean annual exposure at time of diagnosis of 10 µg/m(3) nitrogen dioxide (NO2) and 10 dB road traffic noise at the residential address was associated with ischemic stroke with incidence rate ratios (IRR) of 1.11 (95% CI: 1.03, 1.20) and 1.16 (95% CI: 1.07, 1.24), respectively, in single exposure models. In two-exposure models road traffic noise (IRR: 1.15) and not NO2 (IRR: 1.02) was associated with ischemic stroke. The strongest association was found for combination of high noise and high NO2 (IRR=1.28; 95% CI=1.09-1.52). Fatal stroke was positively associated with air pollution and not with traffic noise. In conclusion, in mutually adjusted models road traffic noise and not air pollution was associated ischemic stroke, while only air pollution affected risk for fatal strokes. There were indications of combined effects.

  2. High Spatial Density Ambient Noise Tomography at the El Jefe Geyser, Chile

    Science.gov (United States)

    Hakso, A. W.; Seats, K.

    2015-12-01

    The El Jefe geyser in the Atacama Desert, Chile has been the subject of study to better understand processes of heat transport and eruption mechanisms in geyser systems (Munoz-Saez et al., 2015). Existing seismological literature on geyser and volcanic systems is predominantly focused on seismicity generated in the eruptive process (Benoit and McNutt, 1997; O'Brien et al., 2011). In contrast, this study leverages seismic noise in the repose period to generate an approximation to the Green's function for each receiver pair, known as noise correlation functions (NCFs). A dense seismic array of 51 geophones spaced at 2-10 meter intervals recorded several days of data at a spatial scale and frequency range approximately two orders of magnitude removed from prior seismic interferometry studies. While eruptions of the El Jefe geyser impose a transient signal on a diffuse background noise, a regular eruption interval of 132.52.5 seconds (Munoz-Saez et al., 2015) allows for reliable removal of seismic energy associated with the eruption, improving the azimuthal distribution of noise across the array. The approach to generating noise correlation functions closely follows the methodology of Seats and Lawrence (2014). Moveout of at least two phases of energy is apparent in the calculated NCFs, suggesting that multiple phases of seismic energy may be present in the noise, moving coherently across the array.

  3. Extensive seismic anisotropy in the lower crust of Archean metamorphic terrain, South India, inferred from ambient noise tomography

    Science.gov (United States)

    Das, Ritima; Rai, S. S.

    2017-01-01

    We use Rayleigh and Love wave empirical Green's function (EGF) recovered from the cross correlation of seismic ambient noise to study the spatial distribution of radial anisotropy in the southern India crust. The corresponding dispersion curves in the period 2 to 32 s are measured from ambient noise data recorded at 57 sites, and the strength of anisotropy computed from the discrepancy between shear velocities obtained from Rayleigh (VSV) and Love (VSH) at various depths down to 40 km. In upper crust (up to a depth of 20 km) the region is characterized by anisotropy coefficients of - 2 to + 2% that could be explained due to a combination of fluid-filled open cracks and foliated metamorphic rocks. At deeper levels (beyond 20 km), except for the Archean metamorphic terrain, most part of south India has anisotropies of up to 5%. This may be due to rocks with varying degree of metamorphism. Beneath the Archean metamorphic terrain, the anisotropy is recorded up to 9% in the depth range of 20-40 km. This high anisotropy is unlikely to be the manifestation of any recent geodynamic process, considering that the region has low surface heat flow ( 30 mW/m2). We propose that the observed strong anisotropy in the metamorphic belt of southern India crust could best be explained as due to the presence of micaceous minerals or amphiboles in the deep crust that are formed possibly during the evolution of granulite terrain at 2.5 Ga.

  4. Seismic tomography and azimuthal anisotropy for the Southern and Eastern Alps from ambient noise cross-correlations

    Science.gov (United States)

    Qorbani, Ehsan; Zigone, Dimitri; Kolinsky, Petr; Fuchs, Florian; Bokelmann, Götz; AlpArray-EASI Working Group

    2016-04-01

    The eastern part of the Alpine chain is considered as an area of complex tectonics and lithospheric structure. Having a relatively dense network of stations in this region provides an opportunity to study the crustal and lithospheric velocity structure using ambient-noise correlations methods. We used continuous data recorded during 2014 at 50 permanent stations located in Austria, Germany, northern Italy, and Slovenia, along with data from 8 temporary stations of the Eastern Alpine Seismic Investigation (EASI) profile. Cross correlation of ambient noise are performed in order to estimate the Green's functions of surface waves propagating between station pairs. Dispersion curves of Rayleigh and Love waves are constructed between 2 and 30 seconds and are then inverted to obtain group velocity maps at different frequency (depth) levels. We present here a new crustal-lithospheric velocity model for the Southern and Eastern Alps, which reveals clear spatial velocity variation and contrasts, associated with major faults, deformed and damaged zones. In this study, we also assess the azimuthal anisotropy from the group velocity measurements. The new finding together with the previous results from SKS splitting and receiver function provides 3D images of anisotropy at scales ranging from crust to upper mantle. This allows us to discuss the strain field and deformation pattern within both shallow and lithospheric-asthenospheric depth, in relation with the most prominent tectonic processes in the region, such as eastward extrusion of the ALCAPA block (Eastern Alps, Western Carpathian, and Pannonian Basin).

  5. Refinements to the method of epicentral location based on surface waves from ambient seismic noise: introducing Love waves

    Science.gov (United States)

    Levshin, Anatoli L.; Barmin, Mikhail P.; Moschetti, Morgan P.; Mendoza, Carlos; Ritzwoller, Michael H.

    2012-01-01

    The purpose of this study is to develop and test a modification to a previous method of regional seismic event location based on Empirical Green’s Functions (EGFs) produced from ambient seismic noise. Elastic EGFs between pairs of seismic stations are determined by cross-correlating long ambient noise time-series recorded at the two stations. The EGFs principally contain Rayleigh- and Love-wave energy on the vertical and transverse components, respectively, and we utilize these signals between about 5 and 12 s period. The previous method, based exclusively on Rayleigh waves, may yield biased epicentral locations for certain event types with hypocentral depths between 2 and 5 km. Here we present theoretical arguments that show how Love waves can be introduced to reduce or potentially eliminate the bias. We also present applications of Rayleigh- and Love-wave EGFs to locate 10 reference events in the western United States. The separate Rayleigh and Love epicentral locations and the joint locations using a combination of the two waves agree to within 1 km distance, on average, but confidence ellipses are smallest when both types of waves are used.

  6. Evaluation of the scattered pressure due to infinite rigid cylinders, infinite elastic cylindrical shells, and rigid spheres in the presence of an ambient noise field

    Science.gov (United States)

    Honeycutt, Rebecca L.; Johnson, Steven J.

    1993-04-01

    The sound scattering due to an ambient noise field, approximated by a squared cosine function, is considered for infinite rigid and elastic cylinders and rigid spheres. For the cylinders, it is assumed that the acoustic wave front is parallel to the axis of the cylinder (informally incident). For this assumption, a closed form expression for the scattered sound field-to-incident ambient noise field (signal-to-noise) ratio is obtained not only for the cosine squared directivity, but for any arbitrary directivity which can be expressed in terms of a Fourier series. For the sphere, it is assumed that the noise is circumferentially symmetric which leads to a closed form expression for the signal-to-noise ratio due to a cosine squared directivity.

  7. [Noise-reduction function and its affecting factors of urban plant communities in Shanghai].

    Science.gov (United States)

    Zhang, Qing-Fei; Zheng, Si-Jun; Xia, Lei; Wu, Hai-Ping; Zhang, Ming-Li; Li, Ming-Sheng

    2007-10-01

    The factor analysis on the relationships between excess noise attenuation (decrement after noise propagating 30 m) and 8 structural characteristics of 19 urban plant communities in Shanghai showed that all the plant communities had notable effects on reducing noise, and the noise attenuation ability of the communities was significantly higher than that of lawn (P attenuation ability, i.e., those of > or = 10 dB(A), 6-10 dB(A), and attenuation ability of the communities were leaf area index, average bifurcate height, average height, coverage, and average canopy diameter, and their correlation coefficients with noise attenuation were 0.343, 0.318, 0.285, 0.226 and 0.193, respectively. These five factors had a cumulative contribution rate of 65.47%, suggesting that they should be considered in stress when designing urban greenbelt for noise reduction.

  8. Analysis of a pollution problem of ambient noise and bases for a municipality inspection in the center of Talquepaque, Jalisco, Mexico, 2001

    Science.gov (United States)

    Rodriguez, Erika; Orozco, Martha; Palafox, Lourdes

    2002-11-01

    The city of Tlaquepaque is delimited at the north by Guadalajara city, at the west side by Zapopan, at the south side by Tlajomulco and El Salto, and in its east side by Tonala. Our purpose in this study is to create the first noise map of Tlaquepaque, being the study area between the streets: Avenida Ninos Heroes, Revolucion, Florida, and Marcos Montero. We take 53 points of which 77.3% are above 65 dBA, the Leq average of the points was 69.7 dBA, having as a minium 44.8 dBA and as a maximum 108.6 dBA. Nowadays Tlaquepaque does not have any noise map, so we are trying to identify its more complex areas. The high dB levels found in the study show us how high the noise in the street is, and this is reflected by several citizen complaints about noise received by the municipality. Because of this it is necessary to have an ambient noise diagnostic program, and do the necessary modifications to the current inspection and monitoring system. The preliminary results of this first noise map show a really serious problem with ambient noise caused by vehicular traffic, bad urbanization, and the existence of commercial centers that raise the ambient noise.

  9. Stationary-phase integrals in the cross correlation of ambient noise

    NARCIS (Netherlands)

    Boschi, L.; Weemstra, C.

    2015-01-01

    The cross correlation of ambient signal allows seismologists to collect data even in the absence of seismic events. “Seismic interferometry” shows that the cross correlation of simultaneous recordings of a random wavefield made at two locations is formally related to the impulse response between tho

  10. Imaging fluid channels within the NW Bohemia/Vogtland region using ambient seismic noise and MFP analysis

    Science.gov (United States)

    Umlauft, Josefine; Flores Estrella, Hortencia; Korn, Michael

    2016-04-01

    Presently ongoing geodynamic processes within the intracontinental lithospheric mantle give rise to different natural phenomena in the NW Bohemia/Vogtland region, among others: earthquake swarms, mineral springs and degassing zones of mantle-derived fluids (mofettes). Their interaction mechanisms and relations are not yet fully understood, therefore they are intensively studied using geophysical, geological and biological approaches. We focus on the investigation of near-surface channels that conduct mantle-originating fluids as well as CO2 near the Earth's surface. We aim at the detection, imaging and characterization of the fluid channel structure as well as the observation of their temporal and spatial variability. The Hartoušov Mofette Field within the Cheb Basin (NW Bohemia/Vogtland region) is a key site to study fluid flow as it is characterized by strong surface degassing of CO2. On this field, we applied the noise source localization method Matched Field Processing (MFP) considering the fluid flow as seismic noise source. Within multiple campaigns, we measured ambient seismic noise in continous mode during the night to avoid cultural noise generated by human activity. We used arrays of about 30 randomly distributed stations with 1 to 4 ha extent. We compared the surface position of the MFP output with punctual CO2 flux measurements performed by Nickschick et al. (2015) and observed a strong relation between high CO2 flux values and the position of the MFP maxima. Additionally, we observed surface indicators for CO2 degassing on the same positions of the MFP predicted noise sources: wet and dry mofettes accompanied by bog cotton, bug traps and brown to yellow coloured grass. The MFP maxima can be followed into the subsoil to image the fluid channel structure down to 50 m depth. We analyzed the influence of the array size on the vertical and horizontal MFP resolution as well as the temporal and spatial variability of the flow activity.

  11. Ambient seismic noise monitoring of the Super-Sauze landslide from a very dense temporary seismic array

    Science.gov (United States)

    Chtouki, Toufik; Vergne, Jerome; Provost, Floriane; Malet, Jean-Philippe; Burtin, Arnaud; Hibert, Clément

    2017-04-01

    The Super-Sauze landslide is located on the southern part of the Barcelonnette Basin (French Alps) and has developed in a soft clay-shale environment. It is one of the four sites continuously monitored through a wide variety of geophysical and hydro-geological techniques in the framework of the OMIV French national landslide observatory. From early June to mid-July 2016, a temporary dense seismic array has been installed in the most active part of the landslide and at its surroundings. 50 different sites with an average inter-station distance of 50m have been instrumented with 150 miniaturized and autonomous seismic stations (Zland nodes), allowing a continuous record of the seismic signal at frequencies higher than 0.2Hz over an almost regular grid. Concurrently, a Ground-Based InSAR device allowed for a precise and continuous monitoring of the surface deformation. Overall, this experiment is intended to better characterize the spatio-temporal evolution of the deformation processes related to various type of forcing. We analyze the continuous records of ambient seismic noise recorded by the dense array. Using power spectral densities, we characterize the various types of natural and anthropogenic seismic sources, including the effect of water turbulence and bedload transport in the small nearby torrents. We also compute the correlation of the ambient diffuse seismic noise in various frequency bands for the 2448 station pairs to recover the empirical Green functions between them. The temporal evolution of the coda part of these noise correlation functions allows monitoring and localizing shear wave velocity variations in the sliding mass. Here we present some preliminary results of this analysis and compare the seismic variations to meteorological data and surface deformation.

  12. Preliminary Seismic Velocity Structure Results from Ambient Noise and Teleseismic Tomography: Laguna del Maule Volcanic Field, Chile

    Science.gov (United States)

    Wespestad, C.; Thurber, C. H.; Zeng, X.; Bennington, N. L.; Cardona, C.; Singer, B. S.

    2016-12-01

    Laguna del Maule Volcanic Field is a large, restless, rhyolitic system in the Southern Andes that is being heavily studied through several methods, including seismology, by a collaborative team of research institutions. A temporary array of 52 seismometers from OVDAS (the Southern Andean Volcano Observatory), PASSCAL (Portable Array Seismic Studies of the Continental Lithosphere), and the University of Wisconsin-Madison was used to collect the 1.3 years worth of data for this preliminary study. Ambient noise tomography uses surface wave dispersion data obtained from noise correlation functions (NCFs) between pairs of seismic stations, with one of each pair acting as a virtual source, in order to image the velocity structure in 3-D. NCFs were computed for hour-long time windows, and the final NCFs were obtained with phase-weighted stacking. The Frequency-Time Analysis technique was then utilized to measure group velocity between station pairs. NCFs were also analyzed to detect temporal changes in seismic velocity related to magmatic activity at the volcano. With the surface wave data from ambient noise, our small array aperture limits our modeling to the upper crust, so we employed teleseismic tomography to study deeper structures. For picking teleseismic arrivals, we tested two different correlation and stacking programs, which utilize adaptive stacking and multi-channel cross-correlation, to get relative arrival time data for a set of high quality events. Selected earthquakes were larger than magnitude 5 and between 30 and 95 degrees away from the center of the array. Stations that consistently show late arrivals may have a low velocity body beneath them, more clearly visualized via a 3-D tomographic model. Initial results from the two tomography methods indicate the presence of low-velocity zones at several depths. Better resolved velocity models will be developed as more data are acquired.

  13. Simulation Model of the ANC System for Noise Reduction in the Real Ambient

    Directory of Open Access Journals (Sweden)

    STOJANOVIC, V. O.

    2013-08-01

    Full Text Available The simulation model of ANC system for noise reduction caused by rotating machines in a room was described in the first part of this paper. This simulation model was presented in an acoustic-electrical diagram. The detailed mathematical analysis of the adaptive algorithm was performed. The second part of the paper presents the simulation results of the application of the ANC system for the noise reduction of fans in a room intended for a classroom. Simulation was performed for sine and real aroused signal. The results are presented both numerically and graphically and the comparative analysis was also done.

  14. Seismic exploration-scale velocities and structure from ambient seismic noise (>1 Hz)

    NARCIS (Netherlands)

    Draganov, D.; Campman, X.; Thorbecke, J.; Verdel, A.; Wapenaar, K.

    2013-01-01

    The successful surface waves retrieval in solid-Earth seismology using long-time correlations and subsequent tomographic images of the crust have sparked interest in extraction of subsurface information from noise in the exploration seismology. Subsurface information in exploration seismology is usu

  15. A Standard Definition for Wind-Generated, Low-Frequency Ambient Noise Source Levels

    Science.gov (United States)

    1989-02-09

    FUNDING NUMBERS PROGR.AM PROJECT ITASK IWORK UNIT ELEMENT 14O. NO. NO. IACCESSION NO. I I ritLE (include Security Caiafaon) I7Ol A STANDARD DEFINITION...use of a specific propagation code (PE, RAYTRACE, ASTRAL , NORMAL MODE, etc). The specification of noise intensity per unit area with respect to/ /P

  16. Oceanic Wind Speed and Wind Stress Estimation from Ambient Noise Measurements.

    Science.gov (United States)

    1977-02-01

    it was found that noise records may be used to monitor wind speed and wind stress over the ocean. Time series of wind speeds can be produced from...wind direction, the wind stress has also been estimated and vector-averaged. The monthly mean stress from the authors’ data is higher than values

  17. YIP Expansion: Ocean Basin Impact of Ambient Noise on Marine Mammal Detectability, Distribution, and Acoustic Communication

    Science.gov (United States)

    2015-09-30

    Marine Mammal Detectability, Distribution, and Acoustic Communication Jennifer L. Miksis-Olds Applied Research Laboratory The Pennsylvania State...oceanography, signal processing, marine mammal biology, propagation modelling, and statistics. Familiarity and previously established access and...debate on the effect of noise on marine mammals . Application of the most optimal automatic detectors to density estimation efforts over time, examined

  18. Crustal properties in the continuum Baltic Shield-Scandinavian Mountains from seismic ambient noise and magnetotelluric analysis

    Science.gov (United States)

    Ben Mansour, Walid; England, Richard W.; Fishwick, Stewart; Köhler, Andreas; Moorkamp, Max; Ottemøller, Lars; Smirnov, Maxim

    2016-04-01

    The Scandinavian passive margin is a good example of a region where a Precambrian shield is directly in contact with a younger mountain belt. Located along the Atlantic coast, the Scandinavian mountains, formed 440 Ma ago, show high peaks (> 1 km from the sea level) due to an uplift event 12 Ma ago. This topography contrasts strongly with the low topography of the Baltic shield (around 500 m from the sea level). If the mountain shows high topography compared to the shield, P-receiver functions analysis indicates that the Moho is deeper beneath the shield than beneath the orogenic belt. This result is surprising, as simple crustal isostasy would produce the opposite result. It is therefore likely that there is further variation in crustal and lithospheric properties between the shield and the mountain belt. In this perspective, several geophysical experiments (SCANLIPS2, POLENET-LAPNET, SCANLIPS3D, Norwegian National Seismic Network) have been deployed in the region in order to better understand the lateral variation in the crustal properties. From these different seismic arrays, we used the technique of ambient noise cross correlation in order to reconstruct the Rayleigh wave Green's function (R-R and Z-Z components) and produced a new Vs model of the upper crust in the transition between the Scandinavian mountains and Baltic Shield. In addition of this study, a magnetotelluric survey was done in the framework of MaSCa (MAgnetotellurics in the SCandes) project between 2011 and 2013 in the same area of broadband seismic network (Northern Scandinavia Mountains and the Baltic Shield). This project shows higher resistivity in the crust beneath the Baltic shield than beneath the orogenic belt. The results of this study are used in a joint inversion with seismic ambient noise in order to improve existing models. We used the multi objective genetic algorithms (GA) to inverse in the same time seismological data (receiver functions and dispersion curves from seismic ambient

  19. Understanding the formation of the Ontong Java Plateau through joint ambient noise earthquake tomography and laboratory modeling

    Science.gov (United States)

    Covellone, B. M.; Szwaja, S.; Savage, B. K.; Shen, Y.; Kincaid, C. R.

    2013-12-01

    Current knowledge of the Ontong Java Plateau (OJP) comes from a broad range of research disciplines. Despite decades of work, numerous hypotheses on the origin of the OJP do not fully address all of the geophysical and geochemical observations. A more complete image of the current lower crust and upper mantle seismic structure beneath the plateau will provide a link between the plateau's 120 Ma complex history and it's formation. We investigate the anomalous wave speed structure underlying the OJP using an iterative, full-waveform, joint ambient noise and earthquake tomography approach. A 3-dimensional wave speed model is determined from ambient noise data at periods between 25 and 200 seconds. Data from over 100 earthquakes, recorded between 1990 and 2012, are then added to the inversion to improve data coverage and model resolution. The combination of datasets allows us to best exploit the limited station distribution in the Pacific, resulting in resolution better than 5-degrees beneath the plateau and extending to depths greater than 350 km. To improve our sense of expected deformation patterns for sub-plateau mantle through geologic time, a set of laboratory models were run where OJP residuum viscosity is changed relative to the ambient fluid. Models focus on the interaction between OJP residuum and the rollback-driven flow associated with passage of the Tonga subduction system to the south. Model results show dramatic thinning and extraction of the southern portion of sub-OJP fluid due to subduction induced torroidal flows. Significant distortion of the sub-OJP material over roughly the last 40 Ma is predicted in cases where residuum is either stronger or weaker than ambient fluid. The results of this work confirm an anomalously slow mantle beneath the OJP extending to depths greater than 300 km and provide high-resolution images constraining the magnitude and dimensions of wave speed anomalies that can be used to determine thermal and compositional variations

  20. Traffic noise mapping of Indian roads through smartphone user community participation.

    Science.gov (United States)

    Kumar, Rajiv; Mukherjee, Abhijit; Singh, V P

    2017-01-01

    Road traffic noise pollution is a global hazard, and rapid urbanization has aggravated the problem. This paper explores a novel approach which involves a smartphone user community to monitor the prevalent noise. The system involves a client application on smartphones that records noise, processes the information and communicates to a server and shares the information as visual noise levels on Google® Maps. A fuzzy logic-based classification of noise is proposed. Results from residential, commercial, and industrial areas of the northern region of India are demonstrated. The noise levels are generally found to be higher than the prescribed standards. The experiment demonstrates the huge potential of user community participation in monitoring noise pollution.

  1. Underwater Ambient Noise. Proceedings of a Conference Held at SACLANTCEN on 11-14 May 1982. Volume 2. Unclassified Papers. Part 1

    Science.gov (United States)

    1982-06-15

    20 S^-30 -40 CJ -50 -J-60 -70 -1 1 1 1 1 1 r I 80% HORIZONTAL GEOPHONE (a) 2 4 6 8 10 12 14 16 18 FREQUENCY [ HzJ ... TD 6457, 13 April 1981. 2. A. R, Milne and J. H. Ganton, "Ambient Noise Under Arctic-Sea Ice," J. Acoust. So. Am. Vol. 36, No. 5, May 1964. 3. R...Dwyer, "FRAM II Single Channel Ambient Noise Statistics," NUSC TD 6583, 25 November 1981. 4. R. Dwyer, "A Statistical Frequency Domain Signal

  2. Structure of Suasselkä Postglacial Fault in northern Finland obtained by analysis of ambient seismic noise

    Science.gov (United States)

    Afonin, Nikita; Kozlovskaya, Elena

    2016-04-01

    Understanding inner structure of seismogenic faults and their ability to reactivate is particularly important in investigating the continental intraplate seismicity regime. In our study we address this problem using analysis of ambient seismic noise recorded by the temporary DAFNE array in northern Fennoscandian Shield. The main purpose of the DAFNE/FINLAND passive seismic array experiment was to characterize the present-day seismicity of the Suasselkä post-glacial fault (SPGF) that was proposed as one potential target for the DAFNE (Drilling Active Faults in Northern Europe) project. The DAFNE/FINLAND array comprised the area of about 20 to 100 km and consisted of 8 short-period and 4 broad-band 3-component autonomous seismic stations installed in the close vicinity of the fault area. The array recorded continuous seismic data during September, 2011-May, 2013. Recordings of the array have being analyzed in order to identify and locate natural earthquakes from the fault area and to discriminate them from the blasts in the Kittilä Gold Mine. As a result, we found several dozens of natural seismic events originating from the fault area, which proves that the fault is still seismically active. In order to study the inner structure of the SPGF we use cross-correlation of ambient seismic noise recorded by the array. Analysis of azimuthal distribution of noise sources demonstrated that that during the time interval under consideration the distribution of noise sources is close to the uniform one. The continuous data were processed in several steps including single station data analysis, instrument response removal and time-domain stacking. The data were used to estimate empirical Green's functions between pairs of stations in the frequency band of 0.1-1 Hz and to calculate correspondent surface wave dispersion curves. After that S-wave velocity models were obtained as a result of dispersion curves inversion using Geopsy software. The results suggest that the area of

  3. Data analysis results of the second sea trial of ambient noise imaging with acoustic lens in 2014: Two-dimensional target images affected by direction of field of view and spatial noise distribution

    Science.gov (United States)

    Mori, Kazuyoshi; Ogasawara, Hanako; Tsuchiya, Takenobu; Endoh, Nobuyuki

    2016-07-01

    An aspherical lens with an aperture diameter of 1.0 m has been designed and fabricated to develop a prototype system for ambient noise imaging (ANI). A sea trial of silent target detection using the prototype ANI system was conducted under only natural ocean ambient noise at Uchiura Bay in November 2010. It was verified that targets are successfully detected under natural ocean ambient noise, mainly generated by snapping shrimps. Recently, we have built a second prototype ANI system using an acoustic lens with a two-dimensional (2D) receiver array with 127 elements corresponding to a field of view (FOV) spanning 15° horizontally by 9° vertically. In this study, we investigated the effects of the direction of the FOV and the spatial noise distribution on the 2D target image obtained by ANI. Here, the noise sources in front of the target are called “front light”, and those at the rear of the target are called “back light”. The second sea trial was conducted to image targets arranged in the FOV and measure the positions of noise sources at Uchiura Bay in November 10-14, 2014. For front light, the pixel values in the on-target directions were greater than those in other directions owing to the dominant target scatterings. Reversely, for back light, the pixel values in the on-target directions were lower than those in other directions owing to the dominant direct noises such as “silhouette”.

  4. Constraints on the causes of mid-Miocene volcanism in the Pacific Northwest US from ambient noise tomography

    Science.gov (United States)

    Hanson-Hedgecock, Sara; Wagner, Lara S.; Fouch, Matthew J.; James, David E.

    2012-03-01

    We use data from the 118-station High Lava Plains (HLP) seismic experiment together with other regional broadband seismic data to image the 3D shear wave velocity structure in the Pacific Northwest using ambient noise tomography. This extensive data set allows us to resolve fine-scale crustal structures throughout the HLP area in greater detail than previous studies. Our results show 1) a high velocity cylinder in the crust and average velocities in the upper mantle beneath the Owyhee Plateau; 2) a mid-crustal high velocity anomaly along the Snake River Plain that also extends south into Nevada and Utah; 3) a low velocity anomaly directly beneath Yellowstone throughout the crust; and 4) low velocities beneath the HLP both in the crust and uppermost mantle, possibly indicating very thin or absent mantle lithosphere in the area. These features provide important constraints on possible models for Miocene to recent volcanism in the Pacific Northwest.

  5. APL-UW Deep Water Propagation: Philippine Sea Signal Physics and North Pacific Ambient Noise

    Science.gov (United States)

    2015-10-15

    16:34:48 anomaly inhomogeneities, the influence of u1 dominates that of u2 , and therefore Eq. (13) can be simplified to 1 2 T ¼ 1 2 u21 M O; Sð Þ 1;1...mitigate out-of- band noise, (d) resampling to a standard m-sequence frequency of four times the carrier frequency, (e) filtering (in the frequency domain...wander-corrected broad- 31 band behavior well, at least with regard to the average pulse spread, for 8 upper turning points. Low-frequency experiments

  6. Investigation of the relationship between aircraft noise and community annoyance in China

    Directory of Open Access Journals (Sweden)

    Di Guoqing

    2012-01-01

    Full Text Available A survey of community annoyance induced by aircraft noise exposure was carried out around Hangzhou Xiaoshan International Airport. To investigate the relationship curves between aircraft noise and the percentage of "highly annoyed" persons in China and also to get annoyance threshold of aircraft noise in China. Noise annoyance induced by aircraft noise exposure was assessed by 764 local residents around the airport using the International Commission on Biological Effect of Noise (ICBEN scale. The status quo of aircraft noise pollution was measured by setting up 39 monitoring points. The interpolation was used to estimate the weighted effective continuous perceived noise levels (LWECPN in different areas around the airport, and the graph of equal noise level contour was drawn. The membership function was used to calculate the annoyance threshold of aircraft noise. Data were analyzed using SPSS 16.0 and Origin 8.0. The results showed that if LWECPN was 64.3 dB (Ldn was 51.4 dB, then 15% respondents were highly annoyed. If LWECPN was 68.1 dB (Ldn was 55.0 dB, then 25% respondents were highly annoyed. The annoyance threshold of aircraft noise (LWECPN was 73.7 dB, while the annoyance threshold of a single flight incident instantaneous noise level (LAmax was 72.9 dB. People around the airport had felt annoyed before the aircraft noise LWECPN reached the standard limit.

  7. Constraints on the variable subglacial structure of Whillans Ice Stream from ambient noise Rayleigh wave H/V ratios

    Science.gov (United States)

    Pratt, M. J.; Shen, W.; Wiens, D.; Winberry, J. P.; Anandakrishnan, S.

    2016-12-01

    Horizontal-to-vertical (H/V) ellipticity ratios of Rayleigh waves have been used to determine shallow (reflection imaging showing a deeper sedimentary package that extends to an unknown depth. It is also known that the frictional properties of the WIS ice-bed interface at 700 m depth are highly heterogeneous, including stick-spots of high friction, possibly as a result of compacted sediment or bedrock, and active subglacial lakes where frictional coefficients are effectively zero. Ambient noise cross-correlations are calculated between all station pairs, restricting the minimum interstation distance to 20 km, as well as constraining valid H/V ratios of radial and vertical sources between the same station pair to wave energy with good signal-to-noise between 6 s and 20 s that are sensitive to the shear velocity of the shallowest sedimentary layers beneath the ice stream and is combined with average phase and group velocity of the area to help constrain the inversion. H/V ratio modeling results suggest that ratios are highly susceptible to sedimentary layer thickness. Ratios also increase over the observed frequency band with the presence of a shallow, saturated sedimentary layer with high Vp/Vs. In preliminary results, we observe an increase in H/V ratio towards the grounding line as well as at stations where hydro-potential surface is high. These higher ratios can be attributed to higher water content within sediments, or an increase in the sedimentary layer thickness.

  8. A Tool for Low Noise Procedures Design and Community Noise Impact Assessment: The Rotorcraft Noise Model (RNM)

    Science.gov (United States)

    Conner, David A.; Page, Juliet A.

    2002-01-01

    To improve aircraft noise impact modeling capabilities and to provide a tool to aid in the development of low noise terminal area operations for rotorcraft and tiltrotors, the Rotorcraft Noise Model (RNM) was developed by the NASA Langley Research Center and Wyle Laboratories. RNM is a simulation program that predicts how sound will propagate through the atmosphere and accumulate at receiver locations located on flat ground or varying terrain, for single and multiple vehicle flight operations. At the core of RNM are the vehicle noise sources, input as sound hemispheres. As the vehicle "flies" along its prescribed flight trajectory, the source sound propagation is simulated and accumulated at the receiver locations (single points of interest or multiple grid points) in a systematic time-based manner. These sound signals at the receiver locations may then be analyzed to obtain single event footprints, integrated noise contours, time histories, or numerous other features. RNM may also be used to generate spectral time history data over a ground mesh for the creation of single event sound animation videos. Acoustic properties of the noise source(s) are defined in terms of sound hemispheres that may be obtained from theoretical predictions, wind tunnel experimental results, flight test measurements, or a combination of the three. The sound hemispheres may contain broadband data (source levels as a function of one-third octave band) and pure-tone data (in the form of specific frequency sound pressure levels and phase). A PC executable version of RNM is publicly available and has been adopted by a number of organizations for Environmental Impact Assessment studies of rotorcraft noise. This paper provides a review of the required input data, the theoretical framework of RNM's propagation model and the output results. Code validation results are provided from a NATO helicopter noise flight test as well as a tiltrotor flight test program that used the RNM as a tool to aid in

  9. Seismic ambient noise H/V spectral ratio using the ACA (autocorrelations of coda of autocorrelations) approach

    Science.gov (United States)

    Sanchez-Sesma, F. J.; Piña, J.; Campillo, M.; Luzón, F.; García-Jerez, A.; Albarello, D.; Lunedei, E.

    2012-12-01

    The seismic ambient noise horizontal-to-vertical spectral ratios (NHVSR) are valuable for microzonation, and seismic prospecting. This is particularly true for low-cost dense spatial sampling projects. Arai and Tokimatsu (2004) proposed to use average energy densities to compose the ratios. It means that H/V comes from the square root of the ratio of averages. On the other hand, a popular approach makes the average of spectral ratios. For ergodic processes peak values are usually the same using these two approaches. Sometimes however, the observations are insufficient and computed values for low frequencies display large variability and the corresponding H/V estimates may be inaccurate. The bias caused by localized sources may be the source of errors in the estimates. In this work we propose to compute the NHVSR using the Autocorrelations of Coda of Autocorrelations. This ACA approach is inspired in the work by Stehly et al. (2008). They used the Correlations of Coda of Correlations (C3) to isotropize the field. In our ACA approach the whole time series, say of 30 minutes, for each component is autocorrelated and the averages of the spectral density of selected windows (late coda windows are eliminated) are then improved estimates of directional energy densities. The computation of NHVSR using ACA appears more stable and free of transient effects. It remains to establish how this may be accounted for in forward calculation of H/V spectral ratios for models like a layered medium (e.g. Sánchez-Sesma et al., 2011; Albarello and Lunedei, 2011). This will require further scrutiny. References. Albarello, D. & E. Lunedei (2011). Structure of ambient vibration wavefield in the frequency range of engineering interest ([0.5, 20] Hz): insights from numerical modelling. Near Surface Geophysics 9, 543-559. Arai, H. & K. Tokimatsu (2004). S-wave velocity profiling by inversion of microtremor H/V spectrum, Bull. Seismol. Soc. Am. 94, 53-63. Sánchez-Sesma, F. J., M. Rodr

  10. Noise Scaling and Community Noise Metrics for the Hybrid Wing Body Aircraft

    Science.gov (United States)

    Burley, Casey L.; Brooks, Thomas F.; Hutcheson, Florence V.; Doty, Michael J.; Lopes, Leonard V.; Nickol, Craig L.; Vicroy, Dan D.; Pope, D. Stuart

    2014-01-01

    An aircraft system noise assessment was performed for the hybrid wing body aircraft concept, known as the N2A-EXTE. This assessment is a result of an effort by NASA to explore a realistic HWB design that has the potential to substantially reduce noise and fuel burn. Under contract to NASA, Boeing designed the aircraft using practical aircraft design princip0les with incorporation of noise technologies projected to be available in the 2020 timeframe. NASA tested 5.8% scale-mode of the design in the NASA Langley 14- by 22-Foot Subsonic Tunnel to provide source noise directivity and installation effects for aircraft engine and airframe configurations. Analysis permitted direct scaling of the model-scale jet, airframe, and engine shielding effect measurements to full-scale. Use of these in combination with ANOPP predictions enabled computations of the cumulative (CUM) noise margins relative to FAA Stage 4 limits. The CUM margins were computed for a baseline N2A-EXTE configuration and for configurations with added noise reduction strategies. The strategies include reduced approach speed, over-the-rotor line and soft-vane fan technologies, vertical tail placement and orientation, and modified landing gear designs with fairings. Combining the inherent HWB engine shielding by the airframe with added noise technologies, the cumulative noise was assessed at 38.7 dB below FAA Stage 4 certification level, just 3.3 dB short of the NASA N+2 goal of 42 dB. This new result shows that the NASA N+2 goal is approachable and that significant reduction in overall aircraft noise is possible through configurations with noise reduction technologies and operational changes.

  11. Ambient seismic noise as an interesting indirect cue for the Cerithidea decollata migrations

    Science.gov (United States)

    Pazzi, Veronica; Lotti, Alessia

    2017-04-01

    Presence or absence of water, food availability, capability of avoiding predation, and body temperature are constantly changing according to the tidal excursion. In fact, more than the diurnal light-dark variation, tide is shaping the whole intertidal animal life. Therefore, physiological and behavioural systems exist to reduce the stress that the intertidal fauna may face during the unsuitable tidal phase. Cerithidea decollata is a common western Indian Ocean mangrove gastropod. It feeds on the ground at low tide, and climbs the trees two/three hours before the water arrival to avoid submersion. In spite of the irregular East African tidal pattern, it also regularly settles on trunks roughly 40 cm above the maximum level of the incoming tide. Migrations usually take place about twice a day unless at Neap Tide, when snails may remain on the dry ground. Past experiments showed that a biological clock cannot account for water level foreseeing, nor direct visual cues or chemical information from the water itself or from previous migrations have been detected. On the other hand, tidal gravity variations can be felt by the snails. Moreover, other indirect cues could be hypothesize related to a) the oceanic waves reaching the coast and the barrier reef (seismic noise), or b) the changes in ground resistivity (self potential) caused by the sea water moving close. To verify these hypotheses, an integrated geophysical survey (single-station seismic noise and self potential survey) was carried out at Mida Creek (Kenya) to characterize the local seismic wavefield in terms of its amplitude and to measure the temporal variations of the electric potential field. Final goal was to verify whether a correlation exists between the time evolution of these phenomena and the snail movements. Here we present the first results of the seismic noise measurements. Data were acquired by means of a single station all-in-one 3-directional 24-bit digital tromometer equipped with 4.5 Hz

  12. Surface-wave array tomography in SE Tibet from ambient seismic noise and two-station analysis: I - Phase velocity maps

    NARCIS (Netherlands)

    Yao, H.; Hilst, R.D. van der; Hoop, M.V. de

    2006-01-01

    Empirical Green’s functions (EGFs) between pairs of seismographs can be estimated from the time derivative of the long-time cross-correlation of ambient seismic noise. These EGFs reveal velocity dispersion at relatively short periods, which can be used to resolve structures in the crust and uppermos

  13. Noise

    Science.gov (United States)

    Noise is all around you, from televisions and radios to lawn mowers and washing machines. Normally, you ... sensitive structures of the inner ear and cause noise-induced hearing loss. More than 30 million Americans ...

  14. Community response to railway noise: A review of social surveys

    Science.gov (United States)

    Moehler, U.

    1988-01-01

    The many studies on the effects of railway noise on the neighbourhood differ greatly in their design, acoustic and sociological measurement and in their evaluation methods. As the influence of these factors on the sometimes differing results is not quantifiable, only qualitative results can be summarized and commented on. There are only a few studies with special emphasis on the effects of shunting yards, high-speed trains and urban train systems, and therefore only the results concerning free-flow railway traffic are summarized. The LAeq measured outside was shown in almost all the studies to be the most suitable for predicting general annoyance and most of the disturbance reactions compared with other acoustic data, e.g., peak level, pass-by frequency, etc. It is not possible to deduce from the studies in question a limiting value beyond which railway noise is no longer tolerable. Compared to other areas of interference, it is generally agreed that railway noise is at its most annoying in the area of communication. Sleep interference, on the other hand, was only seldomly mentioned and was not considered to be so serious. In addition to the noise level, non-acoustic factors such as attitude towards the railway, neighbourhood environment, etc., obviously considerably affect the annoyance reaction to railway noise too. The question of habituation to railway noise cannot be conclusively answered from the studies analyzed. At the same LAeq, railway noise gives rise to less annoyance than does road-traffic noise. These differences vary according to whether the reference time is day or night, the noise level range is high or low, and according to which annoyance and disturbance reaction is considered.

  15. Association between ambient noise exposure and school performance of children living in an urban area: a cross-sectional population-based study.

    Science.gov (United States)

    Pujol, Sophie; Levain, Jean-Pierre; Houot, Hélène; Petit, Rémy; Berthillier, Marc; Defrance, Jérôme; Lardies, Joseph; Masselot, Cyril; Mauny, Frédéric

    2014-04-01

    Most of the studies investigating the effects of the external noise on children's school performance have concerned pupils in schools exposed to high levels due to aircraft or freeway traffic noise. However, little is known about the consequences of the chronic ambient noise exposure at a level commonly encountered in residential urban areas. This study aimed to assess the relationship between the school performance of 8- to 9-year-old-children living in an urban environment and their chronic ambient noise exposure at home and at school. The children's school performances on the national standardized assessment test in French and mathematics were compared with the environmental noise levels. Children's exposure to ambient noise was calculated in front of their bedrooms (Lden) and schools (LAeq,day) using noise prediction modeling. Questionnaires were distributed to the families to collect potential confounding factors. Among the 746 respondent children, 586 were included in multilevel analyses. On average, the LAeq,day at school was 51.5 dB (SD= 4.5 dB; range = 38-58 dB) and the outdoor Lden at home was 56.4 dB (SD= 4.4 dB; range = 44-69 dB). LAeq,day at school was associated with impaired mathematics score (p = 0.02) or impaired French score (p = 0.01). For a + 10 dB gap, the French and mathematics scores were on average lower by about 5.5 points. Lden at home was significantly associated with impaired French performance when considered alone (p school exposure was considered (p = 0.06). The magnitude of the observed effect on school performance may appear modest, but should be considered in light of the number of people who are potentially chronically exposed to similar environmental noise levels.

  16. Comparison of Ambient Noise From Two Station Designs, Evaluating USArray's Transportable and Flexible Arrays in the Pacific Northwest

    Science.gov (United States)

    Pfeifer, M.; Alvarez, M.; Woodward, R.; Yang, Z.

    2009-12-01

    ambient noise level? Both vault systems are designed to minimize noise from either cultural, electronic or environmental sources. In the case for the TA vault, a 2 meter deep hole is dug using heavy excavation equipment with over a square meter of concrete used for a base and Earth coupling. A deeper vault is known to reduce the diurnal temperature fluctuations that are a major source of noise for the broadband sensor. The standard FA vault is typically less than 1 meter deep dug by hand with approximately 1/10 square meter of concrete as a base. The construction materials and the seismic equipment for both these vaults are otherwise equivalent. We propose the following explanation for the difference in noise levels as a function of frequency and sensor component. The deeper TA vault is more stable with respect tilt which reduces the diurnal and seasonal temperature changes resulting in quieter horizontal data. The general location of TA stations near cultural noise sources such as roadways and population centers contribute to the elevated high frequency noise as compared to FA stations that are often located in very remote locations.

  17. Estimation of time varying system parameters from ambient response using improved Particle-Kalman filter with correlated noise

    Science.gov (United States)

    Sen, Subhamoy; Crinière, Antoine; Mevel, Laurent; Cerou, Frederic; Dumoulin, Jean

    2017-04-01

    within a PF environment that estimates the parameters. This facilitates employing relatively less expensive linear KF for linear state estimation problem while costly PF is employed only for parameter estimation. Additionally, the proposed algorithm also takes care of those systems for which system and measurement noises are not uncorrelated as it is commonly idealized in standard filtering algorithms. As an example, for mechanical systems under ambient vibration it happens when acceleration response is considered as measurement. Thus the process and measurement noise in these system descriptions are obviously correlated. For this, an improved description for the Kalman gain is developed. Further, to enhance the consistency of particle filtering based parameter estimation involving high dimensional parameter space, a new temporal evolution strategy for the particles is defined. This strategy aims at restricting the solution from diverging (up to the point of no return) because of an isolated event of infeasible estimation which is very much likely especially when dealing with high dimensional parameter space.

  18. Adaptation of binaural processing in the adult brainstem induced by ambient noise.

    Science.gov (United States)

    Siveke, Ida; Leibold, Christian; Schiller, Evelyn; Grothe, Benedikt

    2012-01-11

    Interaural differences in stimulus intensity and timing are major cues for sound localization. In mammals, these cues are first processed in the lateral and medial superior olive by interaction of excitatory and inhibitory synaptic inputs from ipsi- and contralateral cochlear nucleus neurons. To preserve sound localization acuity following changes in the acoustic environment, the processing of these binaural cues needs neuronal adaptation. Recent studies have shown that binaural sensitivity adapts to stimulation history within milliseconds, but the actual extent of binaural adaptation is unknown. In the current study, we investigated long-term effects on binaural sensitivity using extracellular in vivo recordings from single neurons in the dorsal nucleus of the lateral lemniscus that inherit their binaural properties directly from the lateral and medial superior olives. In contrast to most previous studies, we used a noninvasive approach to influence this processing. Adult gerbils were exposed for 2 weeks to moderate noise with no stable binaural cue. We found monaural response properties to be unaffected by this measure. However, neuronal sensitivity to binaural cues was reversibly altered for a few days. Computational models of sensitivity to interaural time and level differences suggest that upregulation of inhibition in the superior olivary complex can explain the electrophysiological data.

  19. Ambient Sensors

    NARCIS (Netherlands)

    Börner, Dirk; Specht, Marcus

    2014-01-01

    This software sketches comprise two custom-built ambient sensors, i.e. a noise and a movement sensor. Both sensors measure an ambient value and process the values to a color gradient (green > yellow > red). The sensors were built using the Processing 1.5.1 development environment. Available under th

  20. Ambient Sensors

    NARCIS (Netherlands)

    Börner, Dirk; Specht, Marcus

    2014-01-01

    This software sketches comprise two custom-built ambient sensors, i.e. a noise and a movement sensor. Both sensors measure an ambient value and process the values to a color gradient (green > yellow > red). The sensors were built using the Processing 1.5.1 development environment. Available under

  1. Time-Lapse Monitoring of an Engineering Scaled Excavation at Federal District, Brazil by Passive Ambient NoiseInterferometry

    Science.gov (United States)

    Cárdenas-Soto, M., Sr.; Hussain, Y.; Martinez-Carvajal, H., Sr.; Martino, S., Sr.; Rocha, M., Sr.

    2016-12-01

    Understanding the dynamics of stress relief mechanisms that lead to complete material collapse of unstable slopes is challenging. This research is focused on the novel use of Passive Ambient Noise Interferometry (PANI), a new technique that has revolutionized the seismology. In this technique the impulse response or Green function between two sensors is calculated by cross-correlation of the noise rescored at these stations. We applied PANI to monitor the deformational behavior of a prototype field experiment under semi controlled conditions for their use in landsliding early warning systems.The experimental setup consists of a 2 m engineering-scaled excavation,where induced failure was monitored by ambient vibrations propagating in tropical clayey deposits. The experimental setup consisted of dense network of 20 three components short period seismometers (Sercel L4C-3D) installed in three circular arrays with their distances from face of normal slope as 10, 20 and 30 meters, respectively.The frequency response of these seismometers is in range of 2-100 Hz. Recording was done in continuous mode at sampling rate of 1000 Hz with datalogger (RefTek DAS-130/3). Sensors were time synchronized by twenty 130 GPS/01. In this stage, the stress was applied on the one flank of this normal slope dug in the experimental field of University of Brasilia, by a hydraulic jack through a metallic plate. This incremental loading was kept on rising until the slope failure took place. This loading mechanism provided an opportunity to monitoring the changes in Rayleigh wave velocity before, during and after the complete failure. After initial processing, the green function (GF) or impulse response was calculated between each pair of sensors by cross correlation at time step of 4 second. All individual GFs, for entire monitoring period (30 minutes) were stacked to obtained a single reference GF. Stretching (dt/t) in waveform is calculated by subtracting individual GF from average GF, that

  2. Lithosphere/Asthenosphere Structure beneath the Mendocino Triple Junction from the Analysis of Surface Wave, Ambient Noise, and Receiver Functions

    Science.gov (United States)

    Liu, K.; Zhai, Y.; Levander, A.; Porritt, R. W.; Allen, R. M.; Schmandt, B.; Humphreys, E.; O'Driscoll, L.

    2010-12-01

    We have developed a 3-D shear velocity model using finite-frequency Rayleigh wave phase velocity dispersion, PdS receiver functions, and ambient noise tomography to better understand the complex lithosphere/asthenosphere structures in the Mendocino Triple Junction (MTJ) region. Using approximately 100 events (July 2007-December 2008) recorded by the stations of the Flexible Array Mendocino Experiment (FAME), the USArray Transportable Array (TA) network, and the Berkeley Digital Seismograph network, we have obtained the phase velocities (20-100s) from the finite-frequency Rayleigh wave tomography, which agrees well with the ambient noise tomography results (7-40 s, Porritt & Allen, 2010) in the overlapping period range. We subsequently inverted for a 3-D Vs model on a 0.25°x0.25° grid from the combined dispersion datasets, constrained by interface depths from the PdS receiver functions (Zhai & Levander, 2010). The resulting crustal and upper mantle Vs model (~150 km) reveals strong lateral heterogeneity in the subduction and transform regimes of the Mendocino Triple Junction region where the Gorda, Pacific, and North American plates intersect. The subducting Gorda slab is well-imaged as an eastward-dipping high-velocity anomaly to ~100 km depth. At the same depth to the east we observe a large-scale low velocity zone, which is the mantle wedge beneath the North American Plate. The southern edge of the Gorda plate (SEDGE) is imaged at 80-100 km depth and is in excellent agreement with measurements made from PdS receiver functions, body-wave tomography (Schmandt & Humphreys, 2010; Obrebski et al., 2010), and active source studies. At depths greater than 80 km, we interpret low velocities under the Cascadia subduction zone as the asthenosphere below the Gorda plate, in agreement with measured LAB depths from RFs. South of the SEDGE shallow strong low-velocities appear beneath the transform region, which we interpret as the asthenosphere in the slab-gap region left by

  3. Monitoring South-West Greenland's ice sheet melt with ambient seismic noise

    Science.gov (United States)

    Mordret, Aurélien; Mikesell, Dylan; Harig, Christopher; Lipovsky, Brad; Prieto, German

    2016-04-01

    The Greenland ice sheet (GIS) accounts for ~ 70% of global ice sheet mass loss and contributes to sea level rise at a rate of 0.7 mm/yr. Therefore, the GIS needs to be carefully monitored. The spaceborne techniques commonly used to monitor the GIS mass balance contain inherent uncertainties. These uncertainties can be reduced by comparing independent datasets and techniques. However, spaceborne methods remain inadequate in the sense that they offer low spatial and/or temporal resolution. This fact highlights the need for other complementary methods to monitor the GIS more accurately and with greater resolution. Here we use a seismic method: the correlation of seismic noise recorded at South-West Greenland seismic stations to show that the GIS seasonal melt produces significant variations of seismic wave speed in the Greenland crust. The amplitudes of the measured velocity variations during 2012-2013 correlate with the total ice plus atmospheric mass variations measured by the GRACE (Gravity Recovery and Climate Experiment) satellite mission. We explain the phase delay between mass maxima and velocity minima ( 50 days) using a non-linear poroelastic model that includes a 55 cm-thick layer of till between the ice sheet and the bedrock. We, thus, interpret the velocity variations as pore pressure variations in the bedrock resulting from the loading and unloading of the overlying glacier and atmosphere. This method provides a new and independent way to monitor in near real-time the first-order state of the GIS, giving new constraints on its evolution and its contribution to the global sea level rise. By increasing the density of seismic stations in the region it will be possible to increase the spatial and temporal resolution of the method and create detailed maps of ice-mass variations across Greenland.

  4. Response of hydrothermal system to stress transients at Lassen Volcanic Center, California, inferred from seismic interferometry with ambient noise

    Science.gov (United States)

    Taira, Taka'aki; Brenguier, Florent

    2016-10-01

    Time-lapse monitoring of seismic velocity at volcanic areas can provide unique insight into the property of hydrothermal and magmatic fluids and their temporal variability. We established a quasi real-time velocity monitoring system by using seismic interferometry with ambient noise to explore the temporal evolution of velocity in the Lassen Volcanic Center, Northern California. Our monitoring system finds temporal variability of seismic velocity in response to stress changes imparted by an earthquake and by seasonal environmental changes. Dynamic stress changes from a magnitude 5.7 local earthquake induced a 0.1 % velocity reduction at a depth of about 1 km. The seismic velocity susceptibility defined as ratio of seismic velocity change to dynamic stress change is estimated to be about 0.006 MPa-1, which suggests the Lassen hydrothermal system is marked by high-pressurized hydrothermal fluid. By combining geodetic measurements, our observation shows that the long-term seismic velocity fluctuation closely tracks snow-induced vertical deformation without time delay, which is most consistent with an hydrological load model (either elastic or poroelastic response) in which surface loading drives hydrothermal fluid diffusion that leads to an increase of opening of cracks and subsequently reductions of seismic velocity. We infer that heated-hydrothermal fluid in a vapor-dominated zone at a depth of 2-4 km range is responsible for the long-term variation in seismic velocity[Figure not available: see fulltext.

  5. Inversion of ambient seismic noise HVSR to evaluate velocity and structural models of the Lower Tagus Basin, Portugal

    Science.gov (United States)

    Borges, J. F.; Silva, H. G.; Torres, R. J. G.; Caldeira, B.; Bezzeghoud, M.; Furtado, J. A.; Carvalho, J.

    2016-07-01

    During its history, several significant earthquakes have shaken the Lower Tagus Valley (Portugal). These earthquakes were destructive; some strong earthquakes were produced by large ruptures in offshore structures located southwest of the Portuguese coastline, and other moderate earthquakes were produced by local faults. In recent years, several studies have successfully obtained strong-ground motion syntheses for the Lower Tagus Valley using the finite difference method. To confirm the velocity model of this sedimentary basin obtained from geophysical and geological data, we analysed the ambient seismic noise measurements by applying the horizontal to vertical spectral ratio (HVSR) method. This study reveals the dependence of the frequency and amplitude of the low-frequency (HVSR) peaks (0.2-2 Hz) on the sediment thickness. We have obtained the depth of the Cenozoic basement along a profile transversal to the basin by the inversion of these ratios, imposing constraints from seismic reflection, boreholes, seismic sounding and gravimetric and magnetic potentials. This technique enables us to improve the existing three-dimensional model of the Lower Tagus Valley structure. The improved model will be decisive for the improvement of strong motion predictions in the earthquake hazard analysis of this highly populated basin. The methodology discussed can be applied to any other sedimentary basin.

  6. Crust and upper mantle structure beneath the Pacific Northwest from joint inversions of ambient noise and earthquake data

    Science.gov (United States)

    Wagner, Lara S.; Fouch, Matthew J.; James, David E.; Hanson-Hedgecock, Sara

    2012-12-01

    We perform a joint inversion of phase velocities from both earthquake and ambient noise induced Rayleigh waves to determine shear wave velocity structure in the crust and upper mantle beneath the Pacific Northwest. We focus particularly on the areas affected by mid-Miocene to present volcanic activity. The joint inversion, combined with the high density seismic network of the High Lava Plains seismic experiment and data from the EarthScope Transportable Array, provides outstanding resolution for this area. In Oregon, we find that the pattern of low velocities in the crust and uppermost mantle varies between the High Lava Plains physiographic province and the adjacent northwestern Basin and Range. These patterns may be due to the presence of the Brothers Fault Zone which separates the clockwise rotating northwest Basin and Range from the relatively undeformed areas further north. Further to the east, the Owyhee Plateau, Snake River Plain (SRP) and northeastern Basin and Range are characterized by high crustal velocities, though the depth extent of these fast wave speeds varies by province. Of particular interest is the mid-crustal high velocity sill, previously only identified within the SRP. We show this anomaly extends significantly further south into Utah and Nevada. We suggest that one possible explanation is lateral crustal extrusion due to the emplacement of the high density mafic mid-crustal sill structures within the SRP.

  7. The seismic wave speed structure of the Ontong Java Plateau determined from joint ambient noise and earthquake waveform data

    Science.gov (United States)

    Covellone, B. M.; Savage, B. K.; Shen, Y.

    2014-12-01

    The Ontong Java Plateau (OJP) represents the result of a significant event in the Earth's geologic history. Limited geophysical and geochemical data, as well as the plateau's relative isolation in the Pacific Ocean, have made interpretation of the modern day geologic structure and its 120 Ma formation history difficult. Here we present the highest resolution images to date of the wave speed structure of the OJP region. We use an iterative finite-frequency tomography methodology and a unique data set that combines empirical Green's functions extracted from ambient noise and earthquake waveforms. The uniqueness and combination of datasets allow us to best exploit the limited station distribution in the Pacific and image wave speed structures between 35 km and greater than 250 km into the Earth. We image a region of fast shear wave speeds, greater than 4.75 km/s, that extends to greater than 100 km beneath the plateau. The wave speeds are similar to as observed in cratonic environments and are consistent with a compositional anomaly likely a result of eclogite entrainment during the plateau's formation.

  8. Crustal imaging of western Michoacán and the Jalisco Block, Mexico, from Ambient Seismic Noise

    Science.gov (United States)

    Spica, Zack; Cruz-Atienza, Víctor M.; Reyes-Alfaro, Gabriel; Legrand, Denis; Iglesias-Mendoza, Arturo

    2014-12-01

    Detailed crustal imaging of western Michoacán and the Jalisco Block is obtained from ambient noise tomography. Results show a deep and well-delineated volcanic system below the Colima volcano complex, rooting up to ~ 22 km depth, with a shallow magmatic chamber constrained to the first ~ 7 km. A shallow low-velocity system to the south of the Chapala rift and west of the Michoacán-Guanajuato volcanic field merges, underneath the Colima rift, with the Colima volcano system at about 20 km depth, honoring the geometry of the Trans-Mexican Volcanic Belt. For depths greater than ~30 km, low-velocity features become parallel to the slab strike, right beneath the Mascota, Ayutla and Tapalpa volcanic fields, suggesting the presence of the mantle wedge above the Rivera plate. All mentioned low-velocity bodies are spatially correlated with the superficial volcanic activity suggesting their magmatic origin so that, the shallower these bodies, the younger are the associated volcanic deposits. Along the coast, different depths of the uppermost layer of the Rivera and the Cocos plates suggest that the latter plate subducts with an angle ~ 9° steeper than the former.

  9. Determination of Rayleigh wave ellipticity across the Earthscope Transportable Array using single-station and array-based processing of ambient seismic noise

    Science.gov (United States)

    Workman, Eli; Lin, Fan-Chi; Koper, Keith D.

    2017-01-01

    We present a single station method for the determination of Rayleigh wave ellipticity, or Rayleigh wave horizontal to vertical amplitude ratio (H/V) using Frequency Dependent Polarization Analysis (FDPA). This procedure uses singular value decomposition of 3-by-3 spectral covariance matrices over 1-hr time windows to determine properties of the ambient seismic noise field such as particle motion and dominant wave-type. In FPDA, if the noise is mostly dominated by a primary singular value and the phase difference is roughly 90° between the major horizontal axis and the vertical axis of the corresponding singular vector, we infer that Rayleigh waves are dominant and measure an H/V ratio for that hour and frequency bin. We perform this analysis for all available data from the Earthscope Transportable Array between 2004 and 2014. We compare the observed Rayleigh wave H/V ratios with those previously measured by multicomponent, multistation noise cross-correlation (NCC), as well as classical noise spectrum H/V ratio analysis (NSHV). At 8 s the results from all three methods agree, suggesting that the ambient seismic noise field is Rayleigh wave dominated. Between 10 and 30 s, while the general pattern agrees well, the results from FDPA and NSHV are persistently slightly higher (˜2 per cent) and significantly higher (>20 per cent), respectively, than results from the array-based NCC. This is likely caused by contamination from other wave types (i.e. Love waves, body waves, and tilt noise) in the single station methods, but it could also reflect a small, persistent error in NCC. Additionally, we find that the single station method has difficulty retrieving robust Rayleigh wave H/V ratios within major sedimentary basins, such as the Williston Basin and Mississippi Embayment, where the noise field is likely dominated by reverberating Love waves and tilt noise.

  10. Impact of Anthropogenic Noise on Aquatic Animals: From Single Species to Community-Level Effects.

    Science.gov (United States)

    Sabet, Saeed Shafiei; Neo, Yik Yaw; Slabbekoorn, Hans

    2016-01-01

    Anthropogenic noise underwater is on the rise and may affect aquatic animals of marine and freshwater ecosystems. Many recent studies concern some sort of impact assessment of a single species. Few studies addressed the noise impact on species interactions underwater, whereas there are some studies that address community-level impact but only on land in air. Key processes such as predator-prey or competitor interactions may be affected by the masking of auditory cues, noise-related disturbance, or attentional interference. Noise-associated changes in these interactions can cause shifts in species abundance and modify communities, leading to fundamental ecosystem changes. To gain further insight into the mechanism and generality of earlier findings, we investigated the impact on both a predator and a prey species in captivity, zebrafish (Danio rerio) preying on waterfleas (Daphnia magna).

  11. Community response to construction noise in three central cities of Zhejiang province, China.

    Science.gov (United States)

    Liu, Yong; Xia, Bo; Cui, Caiyun; Skitmore, Martin

    2017-11-01

    As a common source of environmental noise in China and many developing countries worldwide, construction work provokes many complaints and deterioration in acoustic climate quality. This paper describes research to obtain an improved understanding of people's community response to, and evaluation of, construction noise in three central cities of Zhejiang province, China. This involved carrying out a social survey using standard questionnaires developed by the International Commission on Biological Effects of Noise (ICBEN). A dose-response relationship model is established using a quadratic polynomial regression analysis based on construction noise exposure measurements from 40 construction sites in Hangzhou, Ningbo and Wenzhou. The results of the study indicate that the majority of people have a negative attitude to construction noise; the noise ranges between 60 dB and 80 dB (compared with 50 dB-70 dB traffic noise in Tianjin), with the percentage of highly annoyed people affected increasing from 15%-20% to 30%-40% over the range. There also different levels of annoyance depending on the time of day, and the location and activities of those affected. Other cultural differences are also apparent both between Ningbo/Wenzhou and the more urbane citizens of Hangzhou, and the Chinese people and their more noise-tolerant EU and Vietnam counterparts. The findings of this study provide a new perspective for the study of construction noise that can help local governments have an improved understanding of how residents react to construction noise for the purpose of selecting construction noise-mitigation projects and introducing construction noise-control regulations. Copyright © 2017 Elsevier Ltd. All rights reserved.

  12. A statistical assessment of seismic models of the U.S. continental crust using Bayesian inversion of ambient noise surface wave dispersion data

    Science.gov (United States)

    Olugboji, T. M.; Lekic, V.; McDonough, W.

    2017-07-01

    We present a new approach for evaluating existing crustal models using ambient noise data sets and its associated uncertainties. We use a transdimensional hierarchical Bayesian inversion approach to invert ambient noise surface wave phase dispersion maps for Love and Rayleigh waves using measurements obtained from Ekström (2014). Spatiospectral analysis shows that our results are comparable to a linear least squares inverse approach (except at higher harmonic degrees), but the procedure has additional advantages: (1) it yields an autoadaptive parameterization that follows Earth structure without making restricting assumptions on model resolution (regularization or damping) and data errors; (2) it can recover non-Gaussian phase velocity probability distributions while quantifying the sources of uncertainties in the data measurements and modeling procedure; and (3) it enables statistical assessments of different crustal models (e.g., CRUST1.0, LITHO1.0, and NACr14) using variable resolution residual and standard deviation maps estimated from the ensemble. These assessments show that in the stable old crust of the Archean, the misfits are statistically negligible, requiring no significant update to crustal models from the ambient noise data set. In other regions of the U.S., significant updates to regionalization and crustal structure are expected especially in the shallow sedimentary basins and the tectonically active regions, where the differences between model predictions and data are statistically significant.

  13. Structure of magma reservoirs beneath Merapi and surrounding volcanic centers of Central Java modeled from ambient noise tomography

    Science.gov (United States)

    Koulakov, Ivan; Maksotova, Gulzhamal; Jaxybulatov, Kayrly; Kasatkina, Ekaterina; Shapiro, Nikolai M.; Luehr, Birger-G.; El Khrepy, Sami; Al-Arifi, Nassir

    2016-10-01

    We present a three-dimensional model of the distribution of S-wave velocity in the upper crust to a depth of 20 km beneath Central Java based on the analysis of seismic ambient noise data recorded by more than 100 seismic stations in 2004 associated with the MERAMEX project. To invert the Rayleigh wave dispersion curves to construct 2-D group-velocity maps and 3-D distributions of S-wave velocity, we have used a new tomographic algorithm based on iterative linearized inversion. We have performed a series of synthetic tests that demonstrate significantly higher resolution in the upper crust with this model compared to the local earthquake travel-time tomography (LET) model previously applied for the same station network. Beneath the southern flank of Merapi, we identify a large low-velocity anomaly that can be split into two layers. The upper layer reflects the ˜1 km thick sedimentary cover of volcanoclastic deposits. The deeper anomaly at depths of ˜4-8 km may represent a magma reservoir with partially molten rock that feeds several volcanoes in Central Java. Beneath the Merapi summit, we observe another low-velocity anomaly as deep as 8 km that may be associated with the active magma reservoir that feeds the eruptive activity of Merapi. In the southern portion of the study area, in the lower crust, we identify a low-velocity anomaly that may represent the top of the pathways of volatiles and melts ascending from the slab that was previously inferred from the LET model results. We observe that this anomaly is clearly separate from the felsic magma reservoirs in the upper crust.

  14. 3D shear-wave velocity structure of the eastern Tennessee seismic zone from ambient noise correlation data

    Science.gov (United States)

    Arroucau, Pierre; Kuponiyi, Ayodeji; Vlahovic, Gordana; Powell, Chris

    2013-04-01

    The Eastern Tennessee Seismic Zone (ETSZ) is an intraplate seismic region characterized by frequent but low magnitude earthquakes and is the second most active seismic area in the United States east of the Rocky Mountains. One key question in the ETSZ is the actual relationship between earthquake distribution and geological structure at depth. Seismicity is mostly confined in the Precambrian basement, below the Paleozoic cover of the southern Appalachian foreland fold-and-thrust belt and shows little to no correlation with surface geological features. Since the middle of the seventies, the Center for Earthquake Research and Information (CERI) has installed and maintained several seismic networks in central and eastern United States. In this work, we use Rayleigh wave group and phase velocity dispersion information obtained from cross-correlation of seismic ambient noise at 24 short-period stations located in the vicinity of the ETSZ. The 3D velocity structure is estimated in four steps. First, dispersion curves are obtained for simultaneously recording station pairs for periods ranging from 2 to 20 s. Then, 2D group and phase velocity maps are determined for each period. Those maps are further used to reconstruct dispersion curves at fixed, regularly spaced locations. For each of these locations, a 1D shear-wave velocity profile is finally inverted for, that takes velocity information from previous studies into account. By providing new information about the upper crustal structure of this region, this work is a contribution to the understanding of the seismic activity of the ETSZ, and -to a broader extent- of the structure and evolution of the North American lithosphere.

  15. Surface wave group velocity in the Osaka sedimentary basin, Japan, estimated using ambient noise cross-correlation functions

    Science.gov (United States)

    Asano, Kimiyuki; Iwata, Tomotaka; Sekiguchi, Haruko; Somei, Kazuhiro; Miyakoshi, Ken; Aoi, Shin; Kunugi, Takashi

    2017-08-01

    Inter-station cross-correlation functions estimated using continuous ambient noise or microtremor records were used to extract the seismic wave propagation characteristics of the Osaka sedimentary basin, Japan. Temporary continuous observations were conducted at 15 sites in the Osaka basin between 2011 and 2013. The data were analyzed using seismic interferometry. The target period range was 2-8 s. Cross-correlations between all of the possible station pairs were calculated and stacked to produce a year-long data set, and Rayleigh wave signals in the vertical and radial components and Love wave signals in the transverse component were identified from the results. Simulation of inter-station Green's functions using the finite difference method was conducted to check the performance of the current three-dimensional velocity structure model. The measured time lag between the observed and theoretical Green's functions was less than 2 s for most station pairs, which is less than the wave period of interest in the target frequency range. Group velocity tomography was applied to group delay times estimated by means of multiple filter analysis. The estimated group velocities for longer periods of 5-8 s exhibited spatial variation within the basin, which is consistent with the bedrock depth distribution; however, the group velocities for shorter periods of 2-3 s were almost constant over the studied area. The waveform and group velocity information obtained by seismic interferometry analysis can be useful for future reconstruction of a three-dimensional velocity structure model in the Osaka basin.[Figure not available: see fulltext.

  16. Recent advances in research on non-auditory effects of community noise.

    Science.gov (United States)

    Belojević, Goran; Paunović, Katarina

    2016-01-01

    Non-auditory effects of noise on humans have been intensively studied in the last four decades. The International Commission on Biological Effects of Noise has been following scientific advances in this field by organizing international congresses from the first one in 1968 in Washington, DC, to the 11th congress in Nara, Japan, in 2014. There is already a large scientific body of evidence on the effects of noise on annoyance, communication, performance and behavior, mental health, sleep, and cardiovascular functions including relationship with hypertension and ischemic heart disease. In the last five years new issues in this field have been tackled. Large epidemiological studies on community noise have reported its relationship with breast cancer, stroke, type 2 diabetes, and obesity. It seems that noise-induced sleep disturbance may be one of the mediating factors in these effects. Given a large public health importance of the above-mentioned diseases, future studies should more thoroughly address the mechanisms underlying the reported association with community noise exposure. Keywords: noise; cancer; stroke; diabetes mellitus type 2; obesity

  17. Acoustic ambient noise recorder

    Digital Repository Service at National Institute of Oceanography (India)

    Saran, A.K.; Navelkar, G.S.; Almeida, A.M.; More, S.R.; Chodankar, P.V.; Murty, C.S.

    for in situ measurements up to water depths of 1000 m. The architecture of the unit, pre-deployment and deployment procedures, details of field testing and the results obtained thereof from the analysis are presented. The instrument has potential applications...

  18. Modeling population exposure to community noise and air pollution in a large metropolitan area.

    Science.gov (United States)

    Gan, Wen Qi; McLean, Kathleen; Brauer, Michael; Chiarello, Sarah A; Davies, Hugh W

    2012-07-01

    Epidemiologic studies have shown that both air pollution and community noise are associated with cardiovascular disease mortality. Because road traffic is a major contributor to these environmental pollutants in metropolitan areas, it is plausible that the observed associations may be confounded by coexistent pollutants. As part of a large population-based cohort study to address this concern, we used a noise prediction model to assess annual average community noise levels from transportation sources in metropolitan Vancouver, Canada. The modeled annual average noise level was 64 (inter quartile range 60-68) dB(A) for the region. This model was evaluated by comparing modeled annual daytime A-weighted equivalent continuous noise levels (L(day)) with measured 5-min daytime A-weighted equivalent continuous noise levels (L(eq,day,5 min)) at 103 selected roadside sites in the study region. On average, L(day) was 6.2 (95% CI, 6.0-7.9) dB(A) higher than, but highly correlated (r=0.62; 95% CI, 0.48-0.72) with, L(eq,day,5 min). These results suggest that our model-based noise exposure assessment could approximately reflect actual noise exposure in the study region. Overall, modeled noise levels were not strongly correlated with land use regression estimates of traffic-related air pollutants including black carbon, particulate matter with aerodynamic diameter ≤2.5 μm (PM(2.5)), NO(2) and NO; the highest correlation was with black carbon (r=0.48), whereas the lowest correlation was with PM(2.5) (r=0.18). There was no consistent effect of traffic proximity on the correlations between community noise levels and traffic-related air pollutant concentrations. These results, consistent with previous studies, suggest that it is possible to assess potential adverse cardiovascular effects from long-term exposures to community noise and traffic-related air pollution in prospective epidemiologic studies. Crown Copyright © 2012. Published by Elsevier Inc. All rights reserved.

  19. The relative importance of noise level and number of events on human reactions to noise: Community survey findings and study methods

    Science.gov (United States)

    Fields, J. M.

    1980-01-01

    The data from seven surveys of community response to environmental noise are reanalyzed to assess the relative influence of peak noise levels and the numbers of noise events on human response. The surveys do not agree on the value of the tradeoff between the effects of noise level and numbers of events. The value of the tradeoff cannot be confidently specified in any survey because the tradeoff estimate may have a large standard error of estimate and because the tradeoff estimate may be seriously biased by unknown noise measurement errors. Some evidence suggests a decrease in annoyance with very high numbers of noise events but this evidence is not strong enough to lead to the rejection of the conventionally accepted assumption that annoyance is related to a log transformation of the number of noise events.

  20. Effects of ambient metals concentrations on the benthic macroinvertebrate community in the Animas River, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Covington, S.M.; Parkhurst, B.R. [Cadmus Group Inc., Laramie, WY (United States); Perino, L. [Sunnyside Gold Corp., Silverton, CO (United States)

    1995-12-31

    The Upper Animas River is located in southern Colorado at approximately 9500 feet above mean sea level near the town of Silverton in San Juan County. It drains several first and second order creeks and gulches, many of which are subject to water quality impacts from natural sources of metals and acid mine drainage and mine tailings from historical mining activity. When the State of Colorado proposed new designated uses with more stringent metal standards for the Upper Animas River, Sunnyside Gold Corp was concerned that these new proposed designated uses and their associated standards were unattainable primarily because of existing poor ambient water quality. Studies were designed to address this and other issues. This presentation focuses on ambient metal concentrations and their effect on macroinvertebrate density and composition. Aluminum, cadmium, copper, iron, manganese, and zinc were measured in the water column and in the precipitate on the gravel-cobble substrates at each location. Macroinvertebrate samples were also collected at these locations. The trends in benthic macroinvertebrate community composition in relationship to metal concentration and distribution will be discussed.

  1. Correlações entre ruído ambiental em sala de aula e voz do professor Correlations between classroom environmental noise and teachers' voice

    Directory of Open Access Journals (Sweden)

    Rafaela Fernanda Guidini

    2012-12-01

    Full Text Available OBJETIVO: Identificar se existe correlação entre ruído ambiental no interior da sala de aula, intensidade da voz e presença de alteração vocal em professores. MÉTODOS: Foi realizada medição do ruído ambiental em dez salas de escolas municipais de ensino fundamental. A intensidade das vozes das professoras foi medida durante atividade de ensino. Amostras de vogal prolongada [é] e contagem de 1 a 20 emitidas pelas professoras foram analisadas utilizando escala GRBASI. Os resultados obtidos foram correlacionados. RESULTADOS: A média de ruído ambiental sem a presença das crianças em sala de aula variou de 40 a 51 dB(A e com a presença das crianças de 45 a 65 dB(A. Entre as professoras, houve 70% de ocorrência de vozes alteradas no grau geral (G e 90% com tensão na voz (S, variando entre graus discreto e moderado. Constatou-se variação entre 52 dB(A e 68 dB(A na intensidade da voz das professoras, atingindo 7,48 dB(A acima do nível do ruído ambiental. Houve correlação entre a intensidade vocal das professoras e ruído ambiental na presença das crianças durante a aula. CONCLUSÃO: Os níveis de ruído ambiental em sala de aula são altos e se correlacionam com o aumento da intensidade das vozes das professoras. Embora com alta ocorrência de vozes alteradas, não é possível correlacioná-las com o nível de ruído ambiental.PURPOSE: To explore the existence of correlations between environmental noise in classrooms, voice intensity and teacher's vocal problems. METHODS: Environmental noise was measured in 10 classrooms of municipal elementary schools; the intensity of teachers' voice was measured during teaching practice; teachers' speech samples containing emissions of sustained vowel [é] and counting from 1 to 20 were analyzed using the GRBASI protocol; and the results were tested for correlation. RESULTS: The average of environmental noise varied from 40 to 51 dB(A without the presence of children in the classroom, and

  2. Installation of the light tight cover for the SSD modules (the modules are behind the aluminium plate). The silicon sensors are sensitive to light tight, so ambient light will increase the noise and may even damage them.

    CERN Multimedia

    Nooren, G.

    2004-01-01

    Installation of the light tight cover for the SSD modules (the modules are behind the aluminium plate). The silicon sensors are sensitive to light tight , so ambient light will increase the noise and may even damage them.

  3. A novel seismic source detection and location algorithm implemented to improve the construction of seismic Green's functions from ambient noise in mines

    Science.gov (United States)

    Dales, P.; Audet, P.; Olivier, G.

    2016-12-01

    The seismic Green's functions constructed by the cross-correlation of ambient noise can be biased by azimuthal variations in ambient noise energy due to the presence of strong impulsive and other persistent sources that contaminate individual cross-correlation functions. While earthquake seismology has led to many developments in detection and location of impulsive sources, there is little work related to other persistent sources which can greatly retard or even prevent the retrieval of the Green's function from ambient noise cross-correlations. We adapt a popular acoustical location method, referred to as the Steered Response Power Phase Transform (SRP-PHAT), to detect and locate different types of seismic sources. This method is a beamforming-like approach that uses the cross-correlation functions in a maximum likelihood search to locate sources of seismic energy. We demonstrate the effectiveness of this technique by detecting and locating impulsive sources (microseismic events) and other persistent sources (like drilling or ore-crushers) in several active underground mine environments. We also show how this information is used to create a stacking filter that enables us to construct good estimates of the Green's function in the presence of unfavorable noise conditions. In brief, this method is used to evaluate the orientation of each station pair with respect to the energy distribution of the seismic wavefield for short successive time periods, and only time periods that are favorable are used to construct the cross-correlation functions for each station pair. Finally, we show how temporal variations in the estimated Green's function can be used to infer stress conditions in rock mass and guide mining operations.

  4. Using Mindfulness to Reduce the Health Effects of Community Reaction to Aircraft Noise

    Science.gov (United States)

    Hede, Andrew J.

    2017-01-01

    Aim: This paper investigates whether mindfulness-based interventions might ameliorate the detrimental health effects of aircraft noise on residential communities. Review: Numerous empirical studies over the past 50 years have demonstrated the increasing negative impact of aircraft noise on residents worldwide. However, extensive database searches have revealed no published studies on psychological interventions that reduce residents’ reactivity to environmental noise. By contrast, there has been extensive research over several decades confirming the effectiveness of mindfulness-based stress reduction training in lowering people’s stress from work and life. Considering that stress is a major component of aircraft noise reaction, it would seem worth assessing whether mindfulness-based interventions might be effective in reducing the health effects of aircraft noise. It appears that no existing conceptualization of mindfulness specifically accounts for noise as a stressor. Conceptual Analysis: A new conceptual model is presented here which explains how mindfulness can reduce noise reactivity. Two types of mindfulness are distinguished: an active form (meta-mindfulness) and a passive form (supra-mindfulness). It is posited that meta-mindfulness can facilitate “cognitive defusion” which research has confirmed as enabling people to disconnect from their own dysfunctional thoughts. In the case of aircraft noise, negative thinking associated with residents’ reactive experiences can exacerbate the health effects they suffer. The present model further proposes that supra-mindfulness can enable an individual to disengage their own sense of identity from the often overwhelming negative thoughts which can define their existence when they are consumed by extreme noise annoyance. Conclusion: The mindfulness processes of defusion and disidentification are postulated to be the key efficacy mechanisms potentially responsible for reducing reactivity to aircraft noise. This

  5. Using mindfulness to reduce the health effects of community reaction to aircraft noise

    Directory of Open Access Journals (Sweden)

    Andrew J Hede

    2017-01-01

    Full Text Available Aim: This paper investigates whether mindfulness-based interventions might ameliorate the detrimental health effects of aircraft noise on residential communities. Review: Numerous empirical studies over the past 50 years have demonstrated the increasing negative impact of aircraft noise on residents worldwide. However, extensive database searches have revealed no published studies on psychological interventions that reduce residents’ reactivity to environmental noise. By contrast, there has been extensive research over several decades confirming the effectiveness of mindfulness-based stress reduction training in lowering people’s stress from work and life. Considering that stress is a major component of aircraft noise reaction, it would seem worth assessing whether mindfulness-based interventions might be effective in reducing the health effects of aircraft noise. It appears that no existing conceptualization of mindfulness specifically accounts for noise as a stressor. Conceptual Analysis: A new conceptual model is presented here which explains how mindfulness can reduce noise reactivity. Two types of mindfulness are distinguished: an active form (meta-mindfulness and a passive form (supra-mindfulness. It is posited that meta-mindfulness can facilitate “cognitive defusion” which research has confirmed as enabling people to disconnect from their own dysfunctional thoughts. In the case of aircraft noise, negative thinking associated with residents’ reactive experiences can exacerbate the health effects they suffer. The present model further proposes that supra-mindfulness can enable an individual to disengage their own sense of identity from the often overwhelming negative thoughts which can define their existence when they are consumed by extreme noise annoyance. Conclusion: The mindfulness processes of defusion and disidentification are postulated to be the key efficacy mechanisms potentially responsible for reducing reactivity to

  6. Using mindfulness to reduce the health effects of community reaction to aircraft noise.

    Science.gov (United States)

    Hede, Andrew J

    2017-01-01

    This paper investigates whether mindfulness-based interventions might ameliorate the detrimental health effects of aircraft noise on residential communities. Numerous empirical studies over the past 50 years have demonstrated the increasing negative impact of aircraft noise on residents worldwide. However, extensive database searches have revealed no published studies on psychological interventions that reduce residents' reactivity to environmental noise. By contrast, there has been extensive research over several decades confirming the effectiveness of mindfulness-based stress reduction training in lowering people's stress from work and life. Considering that stress is a major component of aircraft noise reaction, it would seem worth assessing whether mindfulness-based interventions might be effective in reducing the health effects of aircraft noise. It appears that no existing conceptualization of mindfulness specifically accounts for noise as a stressor. Conceptual Analysis: A new conceptual model is presented here which explains how mindfulness can reduce noise reactivity. Two types of mindfulness are distinguished: an active form (meta-mindfulness) and a passive form (supra-mindfulness). It is posited that meta-mindfulness can facilitate "cognitive defusion" which research has confirmed as enabling people to disconnect from their own dysfunctional thoughts. In the case of aircraft noise, negative thinking associated with residents' reactive experiences can exacerbate the health effects they suffer. The present model further proposes that supra-mindfulness can enable an individual to disengage their own sense of identity from the often overwhelming negative thoughts which can define their existence when they are consumed by extreme noise annoyance. The mindfulness processes of defusion and disidentification are postulated to be the key efficacy mechanisms potentially responsible for reducing reactivity to aircraft noise. This approach can be evaluated by

  7. Study of personal-indoor-ambient fine particulate matters among school communities in mixed urban-industrial environment in India.

    Science.gov (United States)

    Gadkari, Neelima M

    2010-06-01

    The present study is focused on the relationship of school community personal exposure of respirable particulate matter (RPM) with its indoor and ambient outdoor component. A representative longitudinal study design has been adopted. School community is divided into two categories: (1) subjects of science discipline and (2) subjects of nonscience discipline. On the basis of local meteorological parameters and school building constructions, three schools have been identified for the study. Selected subjects have been monitored for 24-h personal RPM exposure along with school indoor and respective outdoor RPM. Paired samples of ambient PM(10) and RPM were collected to establish the correlation between them. Regressions between school indoor and ambient outdoor RPM have shown strong positive relationships in case of two schools having moderate ventilation. The highest RPM to PM(10) ratio (0.62) has occurred at school X located near the steel plant downwind. Almost all indoor and ambient outdoor RPM levels exceed Indian National Ambient Air Quality Standards (NAAQS; 60 microg m( - 3)). Highest levels of indoor and ambient outdoor RPM have occurred in school X located near the steel plant. Subjects belonging to the school located near the steel plant (school X) have shown five to six times higher values of RPM compared to NAAQS standards.

  8. Long-term exposure to road traffic noise, ambient air pollution, and cardiovascular risk factors in the HUNT and lifelines cohorts.

    Science.gov (United States)

    Cai, Yutong; Hansell, Anna L; Blangiardo, Marta; Burton, Paul R; de Hoogh, Kees; Doiron, Dany; Fortier, Isabel; Gulliver, John; Hveem, Kristian; Mbatchou, Stéphane; Morley, David W; Stolk, Ronald P; Zijlema, Wilma L; Elliott, Paul; Hodgson, Susan

    2017-08-01

    Blood biochemistry may provide information on associations between road traffic noise, air pollution, and cardiovascular disease risk. We evaluated this in two large European cohorts (HUNT3, Lifelines). Road traffic noise exposure was modelled for 2009 using a simplified version of the Common Noise Assessment Methods in Europe (CNOSSOS-EU). Annual ambient air pollution (PM10, NO2) at residence was estimated for 2007 using a Land Use Regression model. The statistical platform DataSHIELD was used to pool data from 144 082 participants aged ≥20 years to enable individual-level analysis. Generalized linear models were fitted to assess cross-sectional associations between pollutants and high-sensitivity C-reactive protein (hsCRP), blood lipids and for (Lifelines only) fasting blood glucose, for samples taken during recruitment in 2006-2013. Pooling both cohorts, an inter-quartile range (IQR) higher day-time noise (5.1 dB(A)) was associated with 1.1% [95% confidence interval (95% CI: 0.02-2.2%)] higher hsCRP, 0.7% (95% CI: 0.3-1.1%) higher triglycerides, and 0.5% (95% CI: 0.3-0.7%) higher high-density lipoprotein (HDL); only the association with HDL was robust to adjustment for air pollution. An IQR higher PM10 (2.0 µg/m3) or NO2 (7.4 µg/m3) was associated with higher triglycerides (1.9%, 95% CI: 1.5-2.4% and 2.2%, 95% CI: 1.6-2.7%), independent of adjustment for noise. Additionally for NO2, a significant association with hsCRP (1.9%, 95% CI: 0.5-3.3%) was seen. In Lifelines, an IQR higher noise (4.2 dB(A)) and PM10 (2.4 µg/m3) was associated with 0.2% (95% CI: 0.1-0.3%) and 0.6% (95% CI: 0.4-0.7%) higher fasting glucose respectively, with both remaining robust to adjustment for air/noise pollution. Long-term exposures to road traffic noise and ambient air pollution were associated with blood biochemistry, providing a possible link between road traffic noise/air pollution and cardio-metabolic disease risk.

  9. Preliminary Results From the CAUGHT Experiment: Investigation of the North Central Andes Subsurface Using Receiver Functions and Ambient Noise Tomography

    Science.gov (United States)

    Ryan, J. C.; Ward, K. M.; Porter, R. C.; Beck, S. L.; Zandt, G.; Wagner, L. S.; Minaya, E.; Tavera, H.

    2011-12-01

    Altiplano and portions of the Eastern Cordillera, and at approximately 40 under the sub-Andes and westernmost edge of the Beni basin. Unlike previous studies farther south, we do not see an increased crustal thickness beneath the Eastern Cordillera. The CAUGHT station coverage is also ideal for Ambient Noise Tomography (ANT) to investigate the seismic shear wave velocities in the upper crust (McQuarrie, N., Barnes, J., and Ehlers, T.A., 2008, Geometric, kinematic and erosional history of the central Andean Plateau (15-17°S), northern Bolivia: Tectonics, v. 27, TC3007, doi:10.1029/2006TC002054.

  10. High-resolution lithospheric structure beneath Mainland China from ambient noise and earthquake surface-wave tomography

    Science.gov (United States)

    Bao, X.; Song, X.; Li, J.

    2016-12-01

    We present a new high-resolution shear-velocity model of the lithosphere (down to about 160 km) beneath China using Rayleigh-wave tomography. We combined ambient noise and earthquake data recorded at 1316 seismic stations, the largest number used for the region to date. More than 700,000 dispersion curves were measured to generate group and phase velocity maps at periods of 10-140s. The resolution of our model is significantly improved over previous models with about 1-2°in eastern China and 2-3°in western China. We also derived models of the study region for crustal thickness and averaged S velocities for upper and mid-lower crust and uppermost mantle. These models reveal important lithospheric features beneath China and provide a fundamental data set for understanding continental dynamics and evolution. Different geological units show distinct features in the Moho depth, lithospheric thickness, and shear velocity. In particular, the North China Craton (NCC) lithosphere shows strong east-west structural variations with thin and low-velocity lithosphere in eastern NCC and thick and high-velocity lithosphere beneath western NCC and the lithosphere of the Ordos Block seems to have undergone strong erosion. The results support the progressive destruction of the NCC lithosphere from east to west at least partly caused by the thermal-chemical erosion of the cratonic lithosphere from the asthenosphere. Another pronounced feature of our model is the strong lateral variations of the mantle lithosphere beneath the Tibetan Plateau (TP). The Indian lithosphere beneath the TP shows variable northward advancement with nearly flat subduction in western and eastern TP and steep subduction in central TP with evidence for the tearing of Indian lithosphere beneath central TP, which may be important for the riftings at the surface in Himalayas and southern TP. The low-velocity zone in northern TP shows strong correlation with the region of the mid-Miocene to Quaternary potassic

  11. Application of seismic interferometry by multidimensional deconvolution to ambient seismic noise recorded in Malargüe, Argentina

    Science.gov (United States)

    Weemstra, Cornelis; Draganov, Deyan; Ruigrok, Elmer N.; Hunziker, Jürg; Gomez, Martin; Wapenaar, Kees

    2017-02-01

    Obtaining new seismic responses from existing recordings is generally referred to as seismic interferometry (SI). Conventionally, the SI responses are retrieved by simple crosscorrelation of recordings made by separate receivers: one of the receivers acts as a `virtual source' whose response is retrieved at the other receivers. When SI is applied to recordings of ambient seismic noise, mostly surface waves are retrieved. The newly retrieved surface wave responses can be used to extract receiver-receiver phase velocities. These phase velocities often serve as input parameters for tomographic inverse problems. Another application of SI exploits the temporal stability of the multiply scattered arrivals of the newly retrieved surface wave responses. Temporal variations in the stability and/or arrival time of these multiply scattered arrivals can often be linked to temporally varying parameters such as hydrocarbon production and precipitation. For all applications, however, the accuracy of the retrieved responses is paramount. Correct response retrieval relies on a uniform illumination of the receivers: irregularities in the illumination pattern degrade the accuracy of the newly retrieved responses. In practice, the illumination pattern is often far from uniform. In that case, simple crosscorrelation of separate receiver recordings only yields an estimate of the actual, correct virtual-source response. Reformulating the theory underlying SI by crosscorrelation as a multidimensional deconvolution (MDD) process, allows this estimate to be improved. SI by MDD corrects for the non-uniform illumination pattern by means of a so-called point-spread function (PSF), which captures the irregularities in the illumination pattern. Deconvolution by this PSF removes the imprint of the irregularities on the responses obtained through simple crosscorrelation. We apply SI by MDD to surface wave data recorded by the Malargüe seismic array in western Argentina. The aperture of the array

  12. Analysis of the symmetry of the ambient noise and study of the noise reduction%海洋环境噪声场对称性分析及噪声消除方法

    Institute of Scientific and Technical Information of China (English)

    夏麾军; 马远良; 刘亚雄

    2016-01-01

    Acoustic environment has a low signal-to-noise ratio (SNR); hence, array signal processing is widely used for noise reduction and signal enhancement. The actual ambient noise includes uncorrelated noise and correlated noise. The received noises of the two arbitrary array elements are correlated. Consequently, the performance of array signal processing method decreases obviously. Aiming at this problem, the real-part elimination of covariance matrix method is proposed. Firstly, from a physical point of view, the noise signals can be generated by using a number of uncorrelated noise sources: the more the noise sources, the less the error between the noise from the model and the actual noise will be. Theoretically, the noise field is decomposed into the symmetrical noise field and the asymmetrical noise field. A number of noise sources generate the symmetrical noise fields; the directions of these noise sources are symmetric, and the powers of two arbitrary symmetric sources are the same. Secondly, the symmetry of the ambient noise is analyzed, as a result, the symmetrical noise can only affect the real part of the covariance matrix. Thirdly, the real part of covariance matrix is eliminated in order to reduce the noise, and then the delay-and-sum beamforming is achieved by using only the imaginary part. The advantages are that the output signal-to-noise ratio is increased and the noise output power is reduced obviously;the disadvantage is that it produces a false target. The azimuth of the actual target differs from that of the false target by 180◦, and the false target cannot be distinguished. Finally, to eliminate the false target, the real part of the signal covariance matrix is reconstructed by establishing a constrained optimization problem, which is solved by using the particle swarm algorithm. Then, the reconstructed covariance matrix composed of the imaginary part and the reconstruction of real part is applied to delay-and-sum beamforming, as a result, the

  13. Enhanced Rayleigh waves tomography of Mexico using ambient noise cross-correlations (C1) and correlations of coda of correlations (C3)

    Science.gov (United States)

    Spica, Z. J.; Perton, M.; Calo, M.; Cordoba-Montiel, F.; Legrand, D.; Iglesias, A.

    2015-12-01

    Standard application of the seismic ambient noise tomography considers the existence of synchronous records at stations for green's functions retrieval. More recent theoretical and experimental observations showed the possibility to apply correlation of coda of noise correlation (C3) to obtain green's functions between stations of asynchronous seismic networks making possible to dramatically increase databases for imagining the Earth's interior. However, this possibility has not been fully exploited yet, and right now the data C3 are not included into tomographic inversions to refine seismic structures. Here we show for the first time how to incorporate the data of C1 and C3 to calculate dispersion maps of Rayleigh waves in the range period of 10-120s, and how the merging of these datasets improves the resolution of the structures imaged. Tomographic images are obtained for an area covering Mexico, the Gulf of Mexico and the southern U.S. We show dispersion maps calculated using both data of C1 and the complete dataset (C1+C3). The latter provide new details of the seismic structure of the region allowing a better understanding of their role on the geodynamics of the study area. The resolving power obtained in our study is several times higher than in previous studies based on ambient noise. This demonstrates the new possibilities for imaging the Earth's crust and upper mantle using this enlarged database.

  14. Sources of ambient fine particulate matter at two community sites in Detroit, Michigan

    Science.gov (United States)

    Hammond, Davyda M.; Dvonch, J. Timothy; Keeler, Gerald J.; Parker, Edith A.; Kamal, Ali S.; Barres, James A.; Yip, Fuyuen Y.; Brakefield-Caldwell, Wilma

    Detroit, Michigan is a non-attainment area of the annual PM 2.5 (particles ⩽2.5 μm in diameter) National Ambient Air Quality Standard (NAAQS), and contains a host of local pollution contributors including high diesel traffic from a nearby international border crossing. A source apportionment analysis was conducted using PM 2.5 data collected from 1999 to 2002 by the Community Action Against Asthma (CAAA) project in Detroit, Michigan. CAAA used a community-based participatory research approach to identify and address the environmental triggers for asthma among children residing in southwest and east Detroit. The data used for the study included 24-h measurements of PM 2.5 mass, elemental and organic carbon, and a suite of trace element species, along with hourly measurements of PM 2.5 mass and black carbon. Positive matrix factorization (PMF2) was used to quantitatively apportion the sources of ambient PM 2.5 at each of two Detroit community sites. Results showed that southwest Detroit PM 2.5 levels can be apportioned to seven source categories: secondary sulfate/coal combustion, gasoline vehicles, diesel vehicles, refinery/oil combustion, iron-steel manufacturing/waste incineration, automotive electroplating, and sewage sludge incineration that includes crustal material from runoff. The PMF2 model apportioned the east Detroit PM 2.5 data into five source categories: secondary sulfate/coal combustion, motor vehicles/combustion, refinery/oil combustion, iron-steel manufacturing/waste incineration, and automotive electroplating. For both locations, approximately over 60% of the PM 2.5 mass was attributed to secondary sulfate/coal combustion sources, approximately 30% to vehicular sources, and 1-5% to local industrial sources. The unexplained mass accounted for <2% of the measured PM 2.5 mass. This study illustrates that regional secondary sulfate/coal combustion and local motor vehicle emissions alone are enough for this mid-western US city to be in non

  15. Sources of ambient fine particulate matter at two community sites in Detroit, Michigan

    Energy Technology Data Exchange (ETDEWEB)

    Hammond, D.M.; Dvonch, J.T.; Keeler, G.J.; Parker, E.A.; Kamal, A.S.; Barres, J.A.; Yip, F.Y.; Brakefield-Caldwell, W. [University of Michigan, Ann Arbor, MI (United States). School of Public Health

    2008-02-15

    Detroit, Michigan is a non-attainment area of the annual PM2.5 (particles {le} 2.5 {mu} m in diameter) National Ambient Air Quality Standard (NAAQS), and contains a host of local pollution contributors. crossing. A source apportionment analysis was conducted using PM2.5 data collected from 1999 to 2002 by the Community Action Against Asthma (CAAA) project in Detroit, Michigan. CAAA used a community-based participatory research approach to identify and address the environmental triggers for asthma among children residing in southwest and east Detroit. The data used for the study included 24-h measurements of PM2.5 mass, elemental and organic carbon, and a suite of trace element species, along with hourly measurements Of PM2.5 mass and black carbon. Positive matrix factorization (PMF2) was used to quantitatively apportion the sources of ambient PM2.5 at each of two Detroit community sites. Results showed that southwest Detroit PM2.5 levels can be apportioned to seven source categories: secondary sulfate/coal combustion, gasoline vehicles, diesel vehicles, refinery/oil combustion, iron-steel manufacturing/waste incineration, automotive electroplating, and sewage sludge incineration that includes crustal material from runoff. The PMF2 model apportioned the east Detroit PM2.5 data into five source categories: secondary sulfate/coal combustion, motor vehicles/combustion, refinery/oil combustion, iron-steel manufacturing/waste incineration, and automotive electroplating. For both locations, approximately over 60% of the PM2.5 mass was attributed to secondary sulfate/coal combustion sources, approximately 30% to vehicular sources, and 1-5% to local industrial sources. The unexplained mass accounted for {le} 2% of the measured PM2.5 mass. This study illustrates that regional secondary sulfate/coal combustion and local motor vehicle emissions alone are enough for this mid-western US city to be in non-attainment for the annual PM2.5 NAAQS.

  16. Influence of Solar Radiation and Biotic Interactions on Bacterial and Eukaryotic Communities Associated with Sewage Decomposition in Ambient Water - Poster

    Science.gov (United States)

    Sewage and ambient water both consist of a highly complex array of bacteria and eukaryotic microbes. When these communities are mixed, the persistence of sewage-derived pathogens in environmental waters can represent a significant public health concern. Solar radiation and biotic...

  17. 3D shallow structures in the Baogutu area, Karamay, determined by eikonal tomography of short-period ambient noise surface waves

    Science.gov (United States)

    Xu, Hongrui; Luo, Yinhe; Chen, Chao; Xu, Yixian

    2016-06-01

    Eikonal tomography based on ambient noise data is one of the most effective methods to reveal shallow earth structures. By tracking surface wave phase fronts, constructing travel time surfaces, and computing the gradients of travel time surfaces to generate phase velocity maps, eikonal tomography avoids the ray tracing and matrix construction and inversion in the traditional surface wave tomography methods. In this study, we collect continuous ambient noise data recorded by a dense seismic array in Karamay, Xinjiang to construct a 3D model of shallow structures using eikonal tomography. The seismic array consists of 35 stations with shortest interstation distance close to 1 km. 890 empirical surface wave Green's functions (EGFs) between each station pair are retrieved by cross-correlating one or two months of continuous ambient noise data. From these EGFs, surface wave travel times in the frequency range of 1.8 to 4.0 Hz are measured by a frequency-time analysis technique (FTAN). Then, eikonal tomography is adopted to construct Rayleigh wave phase velocity maps and estimate the phase velocity uncertainties. Finally, we invert the obtained phase velocity dispersion curves for 1D shear velocity profiles and then assemble these 1D profiles to construct a 3D shear velocity model. Major velocity features of our 3D model are correlated well with the known geological features. A shallow east-west velocity discontinuity is observed, which clearly reflects the lithological change between Baogutu formation (C1b) and Xibeikulasi formation (C1x) of lower Carboniferous system. Low shear velocities are observed beneath the location of porphyry copper deposit (V), possibly related to stockwork fracture and hydrothermal brecciation developed during the intrusion of deep magma in forming the deposit.

  18. Resolving Rupture Directivity of Moderate Strike-Slip Earthquakes in Sparse Network with Ambient Noise Location: A Case Study with the 2011 M5.6 Oklahoma Earthquake

    Science.gov (United States)

    He, X.; Ni, S.

    2015-12-01

    Earthquake rupture directivity is essential for improving reliability of shakemap and understanding seismogenic processes by resolving the ruptured fault. Compared with field geological survey and InSAR technique, rupture directivity analysis based on seismological data provides rapid characterization of the rupture finiteness parameters or is almost the only way for resolving ruptured fault for earthquakes weaker than M5. In recent years, ambient seismic noise has been widely used in tomography and as well as earthquake location. Barmin et al. (2011) and Levshin et al. (2012) proposed to locate the epicenter by interpolating the estimated Green's functions (EGFs) determined by cross-correlation of ambient noise to arbitrary hypothetical event locations. This method does not rely on an earth model, but it requires a dense local array. Zhan et al. (2011) and Zeng et al. (2014) used the EGFs between a nearby station and remote stations as calibration for 3D velocity structure and then obtained the centroid location. In contrast, the hypocenter can be determined by P wave onsets. When assuming unilateral rupture, we can resolve the rupture directivity with relative location of the centroid location and hypocenter. We apply this method to the 2011 M5.6 Oklahoma earthquake. One M4.8 foreshock and one M4+ aftershock are chosen as reference event to calibrate the systematic bias of ambient noise location. The resolved rupture plane strikes southwest-northeast, consistent with the spatial distribution of aftershocks (McNamara et al., 2015) and finite fault inversion result (Sun et al., 2014). This method works for unilaterally ruptured strike-slip earthquakes, and more case studies are needed to test its effectiveness.

  19. Intérvalo unitario de tiempo de medición para ruido ambiental Unit timing for environmental noise measurements

    Directory of Open Access Journals (Sweden)

    William A. Giraldo A.

    2011-01-01

    Full Text Available En las entidades ambientales, los encargados de las mediciones de ruido ambiental y en general todas las personas que de una u otra forma han trabajado en esta temática, en algún momento se han puesto a pensar sobre la representatividad del tiempo unitario de muestreo y la forma de realizar evaluaciones para dar cumplimiento con dicho tiempo, sin que se aumenten considerablemente los costos de medición. En este artículo se plantea una metodología para determinar cómo un intervalo de cierta duración -en este caso, quince (15 minutos- para el muestreo del nivel de presión sonora es representativo para el período de una (1 hora, logrando de esta manera optimizar el uso de los sonómetros "fijos" y proponiendo una estrategia para reducir los costos en las mediciones de ruido ambiental y en general la elaboración de mapas de ruido.The managers of environmental noise measurements in environmental control agencies, or in general every person that work in this subject, have to think on the representativity of the unit measurement time interval, and how to evaluate it in order to get good quality results regarding the unit measurement time without increasing the measurement costs. A methodology for deciding if a certain measuring time interval -in this case, fifteen (15 minutes- is representative of noise pressure levels occurring during one hour, is proposed in this paper. This methodology allows to optimize the use of stationary sound level meters and to propose a strategy for reducing the costs of environmental noise measurements and of the designing of noise maps in general.

  20. The functions of sound production in the lined seahorse, Hippocampus erectus, and effects of loud ambient noise on its behavior and physiology in captive environments

    Science.gov (United States)

    Anderson, Paul August

    Loud noise in aquaria represents a cacophonous environment for captive fishes. I tested the effects of loud noise on acoustic communication, feeding behavior, courtship behavior, and the stress response of the lined seahorse, Hippocampus erectus. Total Root Mean Square (RMS) power of ambient noise to which seahorses are exposed in captivity varies widely but averages 126.1 +/- 0.8 deciBels with reference to one micropascal (dB re: 1 muPa) at the middle of the water column and 133.7 +/- 1.1 dB at the tank bottom, whereas ambient noise in the wild averages 119.6 +/- 3.5 dB. Hearing sensitivity of H. erectus, measured from auditory evoked potentials, demonstrated maximum spectrum-level sensitivities of 105.0 +/- 1.5 dB and 3.5 x 10-3 + 7.6 x 10-4 m/s2 at 200 Hz; which is characteristic of hearing generalists. H. erectus produces acoustic clicks with mean peak spectrum-level amplitudes of 94.3 +/- 0.9 dB at 232 +/- 16 Hz and 1.5 x 10 -3 +/- 1.9 x 10-4 m/s2 at 265 +/- 22 Hz. Frequency matching of clicks to best hearing sensitivity, and estimates of audition of broadband signals suggest that seahorses may hear conspecific clicks, especially in terms of particle motion. Behavioral investigations revealed that clicking did not improve prey capture proficiency. However, animals clicked more often as time progressed in a courtship sequence, and mates performed more courtship behaviors with control animals than with muted animals, lending additional evidence to the role of clicking as an acoustic signal during courtship. Despite loud noise and the role of clicking in communication, masking of the acoustic signal was not demonstrated. Seahorses exposed to loud noise in aquaria for one month demonstrated physiological, chronic stress responses: reduced weight and body condition, and increased heterophil to lymphocyte ratio. Behavioral alterations were characterized by greater mean and variance of activity among animals housed in loud tanks in the first week, followed by

  1. Shear-wave velocity anomalies in Southern Andes within latitudes 35°S and 37°S: model and interpretations from seismic ambient noise

    Science.gov (United States)

    González Vidal, Diego M.; Obermann, Anne; Bataille, Klaus; Miller, Stephen A.; Lupi, Matteo

    2017-04-01

    The volcanic arc of the Southern Andes is linked to the oblique convergence of Nazca plate beneath the South American plate (subduction velocity of ˜ 66 mm/yr). The volcanic arc accounts for about sixty active volcanoes of Pleistocene-to-Holocene ages. Here we present a regional-scale (i.e. 35°S and 37.5°S) Rayleigh surface-wave tomography from seismic ambient noise that highligths the three-dimensional shear-wave velocity structure at crustal depths. This study is, to the best of our knowledge, the first attempt of a regional-scale Ambient Noise Tomography of a volcanic arc. We find that velocity anomalies are in agreement with the geological setting and the spatial distribution of the present-day volcanoes. The crystalline Cenozoic basement, represented by the outcrop of Mio-Pliocene plutons shows high-velocity anomalies greater than 3%. On the other hand, Descabezado Grande, Puelche and Laguna del Maule volcanic fields show low-velocity anomalies ranging within 3 - 6% located at 5 - 10 km depth. Nevados de Longaví, Chillán and Antuco volcanoes also show strong low-velocity anomalies. We interpret that mid-crustal low-velocity anomalies are associated with a mechanically weakeaned regions, due to a high porous crust or, the presence of fluids and thermal anomalies.

  2. Can we trace the eastern Gondwanan margin in Australia? New perspectives from transdimensional inversion of ambient noise for 3D shear velocity structure

    Science.gov (United States)

    Pilia, S.; Rawlinson, N.; Direen, N. G.

    2013-12-01

    Although the notion of Rodinia is quite well accepted in the geoscience community, the location and nature of the eastern continental margin of the Gondwana fragment in Australia is still vague and remains one of the most hotly debated topics in Australian geology. Moreover, most post-Rodinian reconstructions models choose not to tackle the ';Tasmanian challenge', and focus only on the tectonic evolution of mainland southeast Australia, thereby conveniently ignoring the wider tectonic implications of Tasmania's complex geological history. One of the chief limitations of the tectonic reconstructions in this region is a lack of information on Paleozoic (possibly Proterozoic) basement structures. Vast Mesozoic-Cainozoic sedimentary and volcanic cover sequences obscure older outcrops and limit the power of direct observational techniques. In response to these challenges, our effort is focused on ambient seismic noise for imaging 3D crustal shear velocity structure using surface waves, which is capable of illuminating basement structure beneath younger cover. The data used in this study is sourced from the WOMBAT transportable seismic array, which is compounded by around 650 stations spanning the majority of southeastern Australia, including Tasmania and several islands in Bass Strait. To produce the highest quality Green's functions, careful processing of the data has been performed, after which group velocity dispersion measurements have been carried out using a frequency-time analysis method on the symmetric component of the empirical Green's functions (EGFs). Group dispersion measurements from the EGFs have been inverted using a novel hierarchical, transdimensional, Bayesian algorithm to obtain Rayleigh-wave group velocity maps at different periods from 2 to 30 s. The new approach has several advantages in that the number and distribution of model parameters are implicitly controlled by the data, in which the noise is treated as unknown in the inversion. This

  3. Qualificação e quantificação da exposição sonora ambiental em uma unidade de terapia intensiva geral Qualification and quantification of ambient noise exposure in a general intensive care unit

    Directory of Open Access Journals (Sweden)

    Raquel Paganini Pereira

    2003-12-01

    Full Text Available Os níveis de ruído hospitalares encontram-se excessivamente elevados, especialmente no ambiente de UTI, em decorrência dos inúmeros alarmes e equipamentos, além da conversação da própria equipe hospitalar. Diante disso, esse ambiente, que deveria ser silencioso e tranqüilo, torna-se ruidoso, transformando-se em um grande fator de estresse e podendo gerar distúrbios fisiológicos e psicológicos tanto nos pacientes como nos funcionários dessa unidade. OBJETIVO: O objetivo deste estudo foi verificar o nível de pressão sonora equivalente em uma UTI geral, procurando estabelecer o período de maior exposição e comparando os resultados com as recomendações nacionais e internacionais. FORMA DE ESTUDO: Estudo observacional. MATERIAL E MÉTODO: Medição do ruído ambiental da UTI do Hospital São Paulo através do analisador de ruído modelo 2260 (Brüel & Kjaer, em período total de 6.000 minutos e aferições a cada 27 segundos, configurado da seguinte forma: tempo de resposta rápido (Fast, medindo em decibel o nível de pressão sonora e usando a ponderação em freqüência A, de setembro de 2001 a junho de 2002 e sem o conhecimento dos funcionários do setor. RESULTADOS: O nível de pressão sonora equivalente (Leq apresentou média de 65,36 dB(A variando de 62,9 a 69,3 dB(A. Durante o período diurno a média do Leq foi de 65,23 dB(A e para o período noturno, 63,89 dB(A. O L FMax encontrado foi de 108,4 dB(A e o L FMin de 40 dB(A. CONCLUSÕES: O nível de ruído encontrado nessa UTI está acima do recomendado pela literatura em todos os períodos analisados. Dessa forma, as fontes produtoras de ruído excessivo precisam ser melhor identificadas para que possam ser tomadas as devidas medidas para atenuação desse ruído e tornar esse ambiente um local mais silencioso, beneficiando a função laborativa dos profissionais e a recuperação dos pacientes.Noise levels in hospitals are excessively high, especially in the ICU

  4. A methodological approach towards high-resolution surface wave imaging of the San Jacinto Fault Zone using ambient-noise recordings at a spatially dense array

    Science.gov (United States)

    Roux, Philippe; Moreau, Ludovic; Lecointre, Albanne; Hillers, Gregor; Campillo, Michel; Ben-Zion, Yehuda; Zigone, Dimitri; Vernon, Frank

    2016-08-01

    We present a new technique for deriving detailed information on seismic velocities of the subsurface material from continuous ambient noise recorded by spatially dense seismic arrays. This method uses iterative double beamforming between various subarrays to extract surface wave contributions from the ambient-noise data in complex environments with unfavourable noise-source distributions. The iterative double beamforming extraction makes it possible to retrieve large amounts of Rayleigh wave traveltime information in a wide frequency band. The method is applied to data recorded by a highly dense Nodal array with 1108 vertical geophones, centred on the damage zone of the Clark branch of the San Jacinto Fault Zone south of Anza, California. The array covers a region of ˜650 × 700 m2, with instrument spacing of 10-30 m, and continuous recording at 500 samples s-1 over 30 d in 2014. Using this iterative double beamforming on subarrays of 25 sensors and cross-correlations between all of the station pairs, we separate surface waves from body waves that are abundant in the raw cross-correlation data. Focusing solely on surface waves, maps of traveltimes are obtained at different frequencies with unprecedented accuracy at each point of a 15-m-spacing grid. Group velocity inversions at 2-4 Hz reveal depth and lateral variations in the structural properties within and around the San Jacinto Fault Zone in the study area. This method can be used over wider frequency ranges and can be combined with other imaging techniques, such as eikonal tomography, to provide unprecedented detailed structural images of the subsurface material.

  5. Community reactions to aircraft noise in the vicinity of airport: A comparative study of the social surveys using interview method

    Science.gov (United States)

    Osada, Y.

    1980-01-01

    A comparative study was performed on the reports of community reactions to aircraft noise. The direct and immediate reactions to aircraft noise such as perceived noisiness, interference with conversations, etc. and various emotional influences were most remarkable; indirect and long term influences such as disturbance of mental work and physical symptoms were less remarkable.

  6. Quantification of airport community noise impact in terms of noise levels, population density, and human subjective response

    Science.gov (United States)

    Deloach, R.

    1981-01-01

    The Fraction Impact Method (FIM), developed by the National Research Council (NRC) for assessing the amount and physiological effect of noise, is described. Here, the number of people exposed to a given level of noise is multiplied by a weighting factor that depends on noise level. It is pointed out that the Aircraft-noise Levels and Annoyance MOdel (ALAMO), recently developed at NASA Langley Research Center, can perform the NRC fractional impact calculations for given modes of operation at any U.S. airport. The sensitivity of these calculations to errors in estimates of population, noise level, and human subjective response is discussed. It is found that a change in source noise causes a substantially smaller change in contour area than would be predicted simply on the basis of inverse square law considerations. Another finding is that the impact calculations are generally less sensitive to source noise errors than to systematic errors in population or subjective response.

  7. An Investigation of Community Attitudes Toward Blast Noise. General Community Survey, Study Site 1

    Science.gov (United States)

    2012-04-01

    Tetra Tech 6410 Enterprise Lane Suite 300 Madison, WI 53719 Kathleen Hodgdon and Trent Gaugler Pennsylvania State University University Park ...social surveys on noise annoyance. Journal of the Acoustical Society of America 64(2):29. Singer, Eleanor , John Van Hoewyk, and Mary P. Maher. 2000...Experiments with incentives in telephone surveys. Public Opinion Quarterly 64(2):171–188. Singer, Eleanor , John Van Hoewyk, Nancy Gebler

  8. Impact of noise and air pollution on pregnancy outcomes

    NARCIS (Netherlands)

    Gehring, Ulrike; Tamburic, Lillian; Sbihi, Hind; Davies, Hugh W.; Brauer, Michael

    2014-01-01

    Background: Motorized traffic is an important source of both air pollution and community noise. While there is growing evidence for an adverse effect of ambient air pollution on reproductive health, little is known about the association between traffic noise and pregnancy outcomes. Methods: We evalu

  9. The environmental legislation in the control of substation noise; A legislacao ambiental no controle de ruido em subestacoes

    Energy Technology Data Exchange (ETDEWEB)

    Farias, Aurelio Pavao de [Eletropaulo Metropolinana, Sao Paulo, SP (Brazil); Delallo, Sumara David [Empresa Paulista de Transmissao de Energia Eletrica S.A. (EPTE), Sao Paulo, SP (Brazil); Bistafa, Sylvio Reynaldo; Grimoni, Jose Aquiles Baesso [Sao Paulo Univ., SP (Brazil). Escola Politecnica

    1998-12-01

    This article describes how the concessionaire faced the problem of urban growth and the consequent build up the load of the substations increasing the noise levels. The concessionaire proceeded an efficient and low cost solution with the semi-confinement of the transformers.

  10. Ambient noise tomography for characterize the subsoil structure below a collapsed mine. Integration with 3D models of electric resistivity tomography and micro-gravity data inversion

    Science.gov (United States)

    Cárdenas-Soto, M.; Tejero, A.; Nava-Flores, M.; Zenil, D. E.; Vidal-Garcia, M.; Garcia-Serrano, A.

    2016-12-01

    In this work we build 3D Vs models using seismic tomography of ambient noise. The goal is to characterize the subsurface structure in order to explore the causes of a sudden mine collapse in the 2nd section of Chapultepec park, Mexico City, near to a recreation lake whose subsoil is composed of vulcano-sedimentary materials that were economically exploited in the mid-20th century, leaving a series of underground mines that were rehabilitated for the construction of the Park. In this site we record ambient noise continuously at a 250 Hz sampling rate by intervals of 30 min in three arrays of quadrangular shape with 64 - 4.5 Hz vertical geophones separated 2m. In order to confront the seismic interferometry results, we also obtain 3D models derivated from Electrical Resistivity Tomography (ERT), and inverted surface micro-gravity data. The correlograms show a well defined pulse for those pairs of receivers whose backazimut is perpendicular to the beltway, which is the main source that generates ambient noise. We show that pulses had a dispersive character due to that define a dispersion curve (fundamental mode of Rayleigh wave) whose velocity values are close to 700 m/s at a frequency of 5 Hz, and tend to average values of 380 m/s in frequencies close to 16 Hz. Then, we build tomography images from the maximum time of the envelope pulse filtering in 18 center frequencies between 4 to 16 Hz. Through the relationship f=Vs/4z we create a 3D model in function of the seudo-depth (z). This model allows to distinguish the irregularity of the subsoil around the mine colapse (5m depth), which underlies a competent structure (Vs>450 m/s) surrounded by vulcano sedimentary material with low Vs values (200 m/s). ERT model show that the low velocity zones are associated with saturation areas, result that is corroborated by low-density values derived from micro-gravity model. The results indicate that the collapse was produced by the hydrostatic imbalance of the competent materials

  11. Thermal conductivity of silver loaded conductive epoxy from cryogenic to ambient temperature and its application for precision cryogenic noise measurements

    Science.gov (United States)

    Amils, Ricardo I.; Gallego, Juan Daniel; Sebastián, José Luis; Muñoz, Sagrario; Martín, Agustín; Leuther, Arnulf

    2016-06-01

    The pressure to increase the sensitivity of instrumentation has pushed the use of cryogenic Low Noise Amplifier (LNA) technology into a growing number of fields. These areas range from radio astronomy and deep space communications to fundamental physics. In this context manufacturing for cryogenic environments requires a proper thermal knowledge of the materials to be able to achieve adequate design behavior. In this work, we present experimental measurements of the thermal conductivity of a silver filled conductive epoxy (EPO-TEK H20E) which is widely used in cryogenic electronics applications. The characterization has been made using a sample preparation which mimics the practical use of this adhesive in the fabrication of cryogenic devices. We apply the data obtained to a detailed analysis of the effects of the conductive epoxy in a monolithic thermal noise source used for high accuracy cryogenic microwave noise measurements. In this application the epoxy plays a fundamental role since its limited thermal conductivity allows heating the chip with relatively low power. To our knowledge, the cryogenic thermal conductivity data of this epoxy has not been reported before in the literature in the 4-300 K temperature range. A second non-conductive epoxy (Gray Scotch-Weld 2216 B/A), also widely used in cryogenic applications, has been measured in order to validate the method by comparing with previous published data.

  12. Seismic velocity structure of the Juan de Fuca and Gorda plates revealed by a joint inversion of ambient noise and regional earthquakes

    Science.gov (United States)

    Gao, Haiying

    2016-05-01

    The crust and upper mantle seismic structure, spanning from the Juan de Fuca and Gorda spreading centers to the Cascade back arc, is imaged with full-wave propagation simulation and a joint inversion of ambient noise and regional earthquake recordings. The spreading centers have anomalously low shear wave velocity beneath the oceanic lithosphere. Around the Cobb axial seamount, we observe a low-velocity anomaly underlying a relatively thin oceanic lithosphere, indicating its influence on the Juan de Fuca ridge. The oceanic Moho is clearly defined by a P velocity increase from 6.3 km/s to 7.5 km/s at about 6 km depth beneath the seafloor. The thickness of the oceanic plates is less than 40 km prior to subduction, and the structure of the oceanic lithosphere varies both along strike and along dip. Farther landward, very low velocity anomalies are observed above the plate interface along the Cascade fore arc, indicative of subducted sediments.

  13. Dynamics in cyanobacterial communities from a relatively stable environment in an urbanised area (ambient springs in Central Poland).

    Science.gov (United States)

    Nowicka-Krawczyk, Paulina; Żelazna-Wieczorek, Joanna

    2017-02-01

    Ambient springs are often cited as an example of an ecosystem with stable environmental conditions. A static biotope fosters the development of constant communities with a stable qualitative and relatively stable quantitative structure. Two years of studying cyanobacteria in different microhabitats of the rheocrenic and limnocrenic ambient springs located in urban areas showed that there is a high degree of cyanobacterial diversity and spatial and seasonal dynamics in communities. Spatial heterogeneity in relation to the type of spring and the type of microhabitat is reflected not only by a change in the quantitative structure (the number of species and their biomass), but also by a change in the composition of species. Seasonal changes depended on the type of spring and the type of microhabitat, where weather conditions influenced the communities by different degrees. Cyanobacterial communities of limnocrenes were more diverse in terms of composition and biomass, but they revealed a low seasonal dynamic in contrast to the communities of rheocrenes. The classification of springs based on their environmental conditions revealed that some springs were similar. The resemblance stemmed from the origin of human impact, which was reflected to a high degree in changes in the natural hydrochemical conditions of the springs. For the purpose of understanding which environmental factors had the greatest influence on cyanobacterial communities, a BIO-ENV procedure was performed. The procedure revealed that of most importance was a group of ions not related to the nature of the spring environment - NH4(+), NO2(-), NO3(-), and PO4(3-). The presence of these ions in groundwater was a result of direct and indirect human activity in the area of aquifers. The dynamics in communities in the studied springs were accelerated by human impact and weather conditions.

  14. Imaging Fractures Through Relative Velocity Change Using Ambient Seismic Noise And Distributed Acoustic Sensing (DAS): A SUBTER Pilot Study At Blue Canyon Dome, Socorro NM

    Science.gov (United States)

    James, S. R.; Knox, H. A.; Ajo Franklin, J. B.; Johnson, T. C.; Morris, J.; Grubelich, M. C.; King, D. K.

    2016-12-01

    Knowledge of fracture systems, including locations, morphology, and evolution, is critical for groundwater management, contaminant transport, and energy applications such as reservoir development (i.e. tight shale and geothermal) and reservoir management (i.e. carbon sequestration and wastewater injection). It has long been understood that the presence of fractures reduces bulk seismic velocity, with waves traveling perpendicular to fracture planes experiencing the strongest velocity reduction. We present results from seismic interferometry using ambient seismic noise to detect velocity changes following fracture emplacement from two energetic stimulations. Distributed Acoustic Sensing (DAS) using fiber optic cables was used to record seismic arrivals at high spatial resolution ( 3 ft). Cables were grouted in the annulus of four cased monitoring boreholes surrounding the stimulation borehole at a radius of 4 feet. Ambient noise was recorded before and after each stimulation for 12-hour time periods. We used the Python package MSNoise to compute cross-correlations of all near-horizontal (less than 60°) channel pairs between boreholes and calculated the velocity change of each time period relative to initial conditions prior to stimulation. Results show an average velocity decrease of approximately 6% following the first fracturing event. Variations between channel pairs suggest some are more strongly affected than others, which is supported by evaluation of other geophysical data. These results show promise for locating fractures based on spatial variation in velocity changes. Unsurprisingly, results following the second stimulation are generally more scattered. Some velocities are further reduced compared to those after the first stimulation while others show a relative velocity increase. These results are roughly consistent with time-lapse seismic measurements conducted using active sources and classical sensors (e.g. hydrophones). Sandia National Laboratories is

  15. Noise in Naming Games, partial synchronization and community detection in social networks

    CERN Document Server

    Zhang, Weituo

    2010-01-01

    The Naming Games (NG) are agent-based models for agreement dynamics, peer pressure and herding in social networks, and protocol selection in autonomous ad-hoc sensor networks. By introducing a small noise term to the NG, the resulting Markov Chain model called Noisy Naming Games (NNG) are ergodic, in which all partial consensus states are recurrent. By using Gibbs-Markov equivalence we show how to get the NNG's stationary distribution in terms of the local specification of a related Markov Random Field (MRF). By ordering the partially-synchronized states according to their Gibbs energy, taken here to be a good measure of social tension, this method offers an enhanced method for community-detection in social interaction data. We show how the lowest Gibbs energy multi-name states separate and display the hidden community structures within a social network.

  16. Ambiente urbano e percepção da poluição sonora Urban environment and perception to noise pollution

    Directory of Open Access Journals (Sweden)

    Adriana Bender Moreira de Lacerda

    2005-12-01

    Full Text Available A presente pesquisa avaliou a percepção da população de uma grande cidade em relação à poluição sonora (ruído urbano. Buscou-se identificar quais fontes sonoras são percebidas com maior freqüência pela população e quais reações psico-sociais relacionadas ao ruído urbano são identificados por ela. Foi utilizado um questionário composto de questões fechadas, abrangendo aspectos demográficos e aspectos psico-sociais referentes ao ruído ambiental. Oitocentos e noventa e dois (892 indivíduos participaram da pesquisa. As principais fontes de ruído citadas pelos moradores como causadoras de incômodo foram: 1 o tráfego de veículos (67 %, 2 os vizinhos (33%, 3 o barulho de sirenes (23%, 4 o barulho de animais (21% e 5 o barulho gerado pela construção civil (21 %. As principais reações psico-sociais foram: 1 irritabilidade (55%, 2 baixa concentração (28%, 3 insônia (20% e 4 dor de cabeça (19%. Os resultados obtidos coincidem com dados obtidos em pesquisas desenvolvidas na Europa, EUA e no Brasil, de que a poluição sonora ambiental influencia a qualidade de vida da população, gerando reações psico-sociais importantes, como: 1 irritabilidade e 2 insônia. Estes podem estar na base de outras doenças (disfunções cardiovasculares, podendo interferir na saúde e no bem estar dos indivíduos em particular e de uma população urbana como um todo, gerando um problema de saúde pública.The present study investigated the psychosocial complaints related to urban noise among the population of Curitiba. We used a questionnaire of closed-set questions to collect data on demographics and psychosocial reactions to environmental noise when subjects are at home. Eight hundred and ninety-two individuals (892 participated of the study. The main noise sources associated with discomfort or annoyance were traffic noise (67%, neighbors (33%, sirens (23%, animals (21%, and construction (21%. The main psychosocial complaints were

  17. 1-D and 2-D resonances in an Alpine valley identified from ambient noise measurements and 3-D modelling

    Science.gov (United States)

    Le Roux, Olivier; Cornou, Cécile; Jongmans, Denis; Schwartz, Stéphane

    2012-09-01

    H/V spectral ratios are regularly used for estimating the bedrock depth in 1-D like basins exhibiting smooth lateral variations. In the case of 2-D or 3-D pronounced geometries, observational and numerical studies have shown that H/V curves exhibit peculiar shapes and that the H/V frequency generally overestimates 1-D theoretical resonance frequency. To investigate the capabilities of the H/V method in complex structures, a detailed comparison between measured and 3-D-simulated ambient vibrations was performed in the small-size lower Romanche valley (French Alps), which shows significant variations in geometry, downstream and upstream the Séchilienne basin. Analysing the H/V curve characteristics, two different wave propagation modes were identified along the valley. Relying on previous geophysical investigation, a power-law relationship was derived between the bedrock depth and the H/V peak frequency, which was used for building a 3-D model of the valley geometry. Simulated and experimental H/V curves were found to exhibit quite similar features in terms of curve shape and peak frequency values, validating the 3-D structure. This good agreement also evidenced two different propagation modes in the valley: 2-D resonance in the Séchilienne basin and 1-D resonance in the external parts. This study underlines the interest of H/V curves for investigating complex basin structures.

  18. 3D-ambient noise Rayleigh wave tomography of Snæfellsjökull volcano, Iceland

    Science.gov (United States)

    Obermann, Anne; Lupi, Matteo; Mordret, Aurélien; Jakobsdóttir, Steinunn S.; Miller, Stephen A.

    2016-05-01

    From May to September 2013, 21 seismic stations were deployed around the Snæfellsjökull volcano, Iceland. We cross-correlate the five months of seismic noise and measure the Rayleigh wave group velocity dispersion curves to gain more information about the geological structure of the Snæfellsjökull volcano. In particular, we investigate the occurrence of seismic wave anomalies in the first 6 km of crust. We regionalize the group velocity dispersion curves into 2-D velocity maps between 0.9 and 4.8 s. With a neighborhood algorithm we then locally invert the velocity maps to obtain accurate shear-velocity models down to 6 km depth. Our study highlights three seismic wave anomalies. The deepest, located between approximately 3.3 and 5.5 km depth, is a high velocity anomaly, possibly representing a solidified magma chamber. The second anomaly is also a high velocity anomaly east of the central volcano that starts at the surface and reaches approximately 2.5 km depth. It may represent a gabbroic intrusion or a dense swarm of inclined magmatic sheets (similar to the dike swarms found in the ophiolites), typical of Icelandic volcanic systems. The third anomaly is a low velocity anomaly extending up to 1.5 km depth. This anomaly, located directly below the volcanic edifice, may be interpreted either as a shallow magmatic reservoir (typical of Icelandic central volcanoes), or alternatively as a shallow hydrothermal system developed above the cooling magmatic reservoir.

  19. A Synthesis of Local, Teleseismic, and Ambient Noise Data for High-Resolution Models of Seismic Structure in Western and Southeast Australia

    Science.gov (United States)

    Young, M. K.; Tkalcic, H.; Rawlinson, N.; Arroucau, P.; Reading, A. M.

    2010-12-01

    Group and phase velocity maps of the Tasmanian and Western Australian lithosphere are obtained through the cross-correlation of seismic ambient noise recorded by temporary array deployments. Group velocities of fundamental mode Rayleigh waves are calculated through an automated frequency-time (FTAN) procedure. Phase-matched filters are applied to the negative time derivative of the symmetric component of the cross-correlation of ambient noise between two stations. Phase velocity maps are derived from the far-field representation of the Green's functions, and the phase ambiguity is resolved through analysis of the observed phase move-out. Group and phase velocities are mapped using an iterative non-linear inversion technique, which smoothly interpolates velocities between a grid of nodes using cubic B-splines. 3-D shear wave velocity can be readily obtained from the phase velocity maps. Additional constraints from receiver functions have the potential to improve depth resolution. The southeast Australia dataset comes from the WOMBAT rolling seismic array project in Tasmania, which in the last decade has seen over 500 stations deployed. Here, we use the 40 station SETA array, which was deployed in southeast Tasmania during 2006 and 2007 and has a station spacing of just 20km. Group and phase velocity maps for this area reinforce results from previous wide-angle tomography studies and clearly discriminate between regions of hard rock and sediment. One of the prominent features of the maps is a pronounced low velocity lineation that coincides with the Tasman conductivity anomaly, a region of elevated conductivity and heat flow, which may reflect the presence of a lithospheric boundary. These methods were also applied to the 20 CAPRAL stations in western Australia. While station spacing is sparser in this case, the greater interstation distances enable longer period dispersion maps to be resolved. The final shear velocity crust models obtained through the joint

  20. Temporal Changes of Seismic Velocity of Shallow Structure Associated With the 2000 Miyakejima Volcano Activity as Inferred From Ambient Seismic Noise Correlation Analyses

    Science.gov (United States)

    Anggono, T.; Nishimura, T.; Sato, H.; Ueda, H.; Ukawa, M.

    2008-12-01

    Miyakejima Island, which is located about 170 km to the south of Tokyo, Japan, is an active volcano of basaltic magma. In 2000 volcanic activity started with magma ascent and migration northwestwardly on June 26 - 27. Then, the volcano formed a caldera on the summit in July, and large amount of volcanic gas emission continued from late August until now. We analyze the ambient seismic noise recorded at three NIED seismic stations (MKK, MKT, and MKS) in the island in order to study the volcano structure behavior associated with such significant volcanic activities. We apply cross correlation analyses to the continuous records of vertical component of short period seismometers (1 s). The data are sampled at a frequency of 100 Hz with an A/D resolution of 16-bit. We calculate cross correlation functions (CCFs) for time window of 60 s for each station pair. We stack the CCFs for each month and bandpass filter the stacked data at frequency band 0.4 - 0.8 Hz. The stacked CCFs, which may represent the Green function between two stations, at station pairs MKK - MKS (the distance is 1.8 km) and MKT - MKS (the distance is 3.9 km) show wave packets with large amplitudes at both sides (positive and negative time delays). The wave packets propagate at group velocities of about 0.8 - 1.0 km/s. The stacked CCFs for MKK - MKT (the distance is 3.1 km) is one sided (negative time delay). Such asymmetric might be due to the inhomogeneous distribution of propagation direction of ambient seismic noise, so we do not use the data for the following analyses. Comparing the CCFs obtained for periods from July 1999 to June 2000 with that of October 2002, we observe small phase difference of the main wave packet. Our results show that for station pair MKK - MKS, whose path crosses the northern part of the island, velocity increased about 1.6 % after the 2000 volcanic activity. For MKT - MKS, whose path closely crosses the newly formed caldera, we estimate the velocity decrease of about 1

  1. Combined use of repeated active shots and ambient noise to detect temporal changes in seismic velocity: application to Sakurajima volcano, Japan

    Science.gov (United States)

    Hirose, Takashi; Nakahara, Hisashi; Nishimura, Takeshi

    2017-03-01

    Coda-wave interferometry is a technique to detect small seismic velocity changes using phase changes in similar waveforms from repeating natural or artificial sources. Seismic interferometry is another technique for detecting seismic velocity changes from cross-correlation functions of ambient seismic noise. We simultaneously use these two techniques to clarify seismic velocity changes at Sakurajima volcano, one of the most active volcanoes in Japan, examining the two methods. We apply coda-wave interferometry to the records of repeated active seismic experiments conducted once a year from 2011 to 2014, and seismic interferometry to the ambient seismic noise data. We directly compare seismic velocity changes from these two techniques. In coda-wave interferometry analyses, we detect significant seismic velocity increases between 2011 and 2013, and seismic velocity decreases between 2013 and 2014 at the northern and eastern flanks of the volcano. The absolute values are at a maximum 0.47 ± 0.06% for 2-4 Hz, 0.24 ± 0.03% for 4-8 Hz, and 0.15 ± 0.03% for 8-16 Hz, respectively. In seismic interferometry analyses, vertical-vertical cross-correlations in 1-2, 2-4, and 4-8 Hz bands indicate seismic velocity increases and decreases during 3 years of 2012-2014 with the maximum amplitudes of velocity change of ±0.3% for 1-2 Hz, ±0.4% for 2-4 Hz, and ±0.2% for 4-8 Hz, respectively. Relative velocity changes indicate the almost annual change. These periodical changes are well matched with volcano deformation detected by GNSS receivers deployed around the volcano. We compare the results from coda-wave interferometry with those from seismic interferometry on the shot days and find that most of them are consistent. This study illustrates that the combined use of coda-wave interferometry and seismic interferometry is useful to obtain accurate and continuous measurements of seismic velocity changes.[Figure not available: see fulltext.

  2. Crustal and upper mantle 3D shear wave velocity structure of the High Lava Plains, Oregon, determined from ambient noise tomography

    Science.gov (United States)

    Hanson-Hedgecock, S.; Wagner, L.; Fouch, M. J.; James, D. E.

    2011-12-01

    We present the results of inversions for 3D shear velocity structure of the crust and uppermost mantle beneath the High Lava Plains, Oregon using data from ~300 broadband stations of the High Lava Plains seismic experiment and the EarthScope/USArray Transportable Array (TA). The High Lava Plains (HLP) is a WNW progressive silicic volcanism, initiated ~14.5 Ma near the Owyhee Plateau and is currently active at the Newberry caldera. The Yellowstone Snake River Plain (YSRP) volcanic track is temporally contemporaneous with the HLP, but trends to the northeast, parallel to North American plate motion. The cause of volcanism along the HLP is debated and has been variously attributed to Basin and Range extension, back-arc extension, rollback of the subducting Juan de Fuca plate, and an intra-continental hotspot/plume source. Additionally the relationship between the HLP, YSRP, and Columbia River Basalts (CRB), the three major post-17Ma intracontinental volcanic provinces of the Pacific Northwest, is not well understood. The 3D shear velocity structure of the crust and uppermost mantle to ~65km depth is determined from fundamental mode Rayleigh wave ambient noise phase velocity maps at periods up to 40s. The use of ambient noise tomography with the dense station spacing of the combined High Lava Plains seismic experiment and the EarthScope/USArray Transportable Array (TA) datasets allows the shallow structure of the High Lava Plains to be imaged in finer detail than previous ANT studies that focused on the entire western United States. In the crust, low velocities in central Oregon are observed in association with the Brothers Fault Zone, Jordan and Diamond Craters and Steens Mountain regions in addition to the strong low velocity zone associated with the Cascades to the west. To the east of the HLP, low velocities are observed to about 10km depth in the western SRP. In the eastern SRP we observe a shallow veneer of low velocities underlain by a ~10km thick high velocity

  3. Transdimensional Love-wave tomography of the British Isles and shear-velocity structure of the East Irish Sea Basin from ambient-noise interferometry

    Science.gov (United States)

    Galetti, Erica; Curtis, Andrew; Baptie, Brian; Jenkins, David; Nicolson, Heather

    2017-01-01

    We present the first Love-wave group-velocity and shear-velocity maps of the British Isles obtained from ambient noise interferometry and fully nonlinear inversion. We computed interferometric inter-station Green's functions by cross-correlating the transverse component of ambient noise records retrieved by 61 seismic stations across the UK and Ireland. Group-velocity measurements along each possible inter-station path were obtained using frequency-time analysis and converted into a series of inter-station traveltime data sets between 4 and 15 s period. Traveltime uncertainties estimated from the standard deviation of dispersion curves constructed by stacking randomly selected subsets of daily cross-correlations were observed to be too low to allow reasonable data fits to be obtained during tomography. Data uncertainties were therefore estimated again during the inversion as distance-dependent functionals. We produced Love-wave group-velocity maps within eight different period bands using a fully nonlinear tomography method which combines the transdimensional reversible-jump Markov chain Monte Carlo (rj-McMC) algorithm with an eikonal ray tracer. By modelling exact ray paths at each step of the Markov chain we ensured that the nonlinear character of the inverse problem was fully and correctly accounted for. Between 4 and 10 s period, the group-velocity maps show remarkable agreement with the known geology of the British Isles and correctly identify a number of low-velocity sedimentary basins and high-velocity features. Longer period maps, in which most sedimentary basins are not visible, are instead mainly representative of basement rocks. In a second stage of our study we used the results of tomography to produce a series of Love-wave group-velocity dispersion curves across a grid of geographical points focussed around the East Irish Sea sedimentary basin. We then independently inverted each curve using a similar rj-McMC algorithm to obtain a series of 1-D shear

  4. Transdimensional Love-wave tomography of the British Isles and shear-velocity structure of the East Irish Sea Basin from ambient-noise interferometry

    Science.gov (United States)

    Galetti, Erica; Curtis, Andrew; Baptie, Brian; Jenkins, David; Nicolson, Heather

    2016-08-01

    We present the first Love-wave group velocity and shear velocity maps of the British Isles obtained from ambient noise interferometry and fully non-linear inversion. We computed interferometric inter-station Green's functions by cross-correlating the transverse component of ambient noise records retrieved by 61 seismic stations across the UK and Ireland. Group velocity measurements along each possible inter-station path were obtained using frequency-time analysis and converted into a series of inter-station traveltime datasets between 4 and 15 seconds period. Traveltime uncertainties estimated from the standard deviation of dispersion curves constructed by stacking randomly-selected subsets of daily cross-correlations, were observed to be too low to allow reasonable data fits to be obtained during tomography. Data uncertainties were therefore estimated again during the inversion as distance-dependent functionals. We produced Love-wave group velocity maps within 8 different period bands using a fully non-linear tomography method which combines the transdimensional reversible-jump Markov chain Monte Carlo (rj-McMC) algorithm with an eikonal raytracer. By modelling exact raypaths at each step of the Markov chain we ensured that the non-linear character of the inverse problem was fully and correctly accounted for. Between 4 and 10 seconds period, the group velocity maps show remarkable agreement with the known geology of the British Isles and correctly identify a number of low-velocity sedimentary basins and high-velocity features. Longer period maps, in which most sedimentary basins are not visible, are instead mainly representative of basement rocks. In a second stage of our study we used the results of tomography to produce a series of Love-wave group velocity dispersion curves across a grid of geographical points focussed around the East Irish Sea sedimentary basin. We then independently inverted each curve using a similar rj-McMC algorithm to obtain a series of

  5. Ground Truth Location of Earthquakes by Use of Ambient Seismic Noise From a Sparse Seismic Network: A Case Study in Western Australia

    Science.gov (United States)

    Zeng, Xiangfang; Xie, Jun; Ni, Sidao

    2015-06-01

    The estimated Green's function (EGF) extracted from the ambient seismic noise cross-correlation function (NCF) enables valuable calibration of surface wave propagation along the path connecting seismic stations. Such calibration is adopted in a new method for ground truth location of earthquakes, achieved from the location relative to a seismic station. The surface wave group travel times were obtained from the NCFs between a station near the earthquake and remote stations. The differential travel times from the NCFs and the surface wave of the earthquake were used in a relative location procedure. When this method was applied to earthquake location with only six seismic stations in western Australia, the location of the Mw 4.1 Kalannie (September 21, 2005) earthquake was found to be accurate to within 2 km compared with the ground truth location with InSAR for which azimuth coverage of seismic stations is preferable. Synthetic tests suggest that the group travel time is slightly affected by focal mechanism and focal depth, thus unknown earthquake source parameters did not introduce substantial bias to earthquake location with the group travel time method.

  6. Crustal and upper mantle S-wave velocity structures across the Taiwan Strait from ambient seismic noise and teleseismic Rayleigh wave analyses

    Science.gov (United States)

    Huang, Y.; Yao, H.; Wu, F. T.; Liang, W.; Huang, B.; Lin, C.; Wen, K.

    2013-12-01

    Although orogeny seems to have stopped in western Taiwan large and small earthquakes do occur in the Taiwan Strait. Limited studies have focused on this region before and were barely within reach for comprehensive projects like TAICRUST and TAIGER for logistical reasons; thus, the overall crustal structures of the Taiwan Strait remain unknown. Time domain empirical Green's function (TDEGF) from ambient seismic noise to determine crustal velocity structure allows us to study an area using station pairs on its periphery. This research aims to resolve 1-D average crustal and upper mantle S-wave velocity (Vs) structures alone paths of several broadband station-pairs across the Taiwan Strait; 5-120 s Rayleigh wave phase velocity dispersion data derived by combining TDEGF and traditional surface wave two-station method (TS). The average Vs structures show significant differences in the upper 15 km as expected. In general, the highest Vs are observed in the coastal area of Mainland China and the lowest Vs appear along the southwest offshore of the Taiwan Island; they differ by about 0.6-1.1 km/s. For different parts of the Strait, the Vs are lower in the middle by about 0.1-0.2 km/s relative to those in the northern and southern parts. The overall crustal thickness is approximately 30 km, much thinner and less variable than under the Taiwan Island.

  7. Imaging hydrothermal systems associated with oceanic ridge: ambient noise and travel-time tomographies in the Reykjanes high-temperature area, SW-Iceland.

    Science.gov (United States)

    Jousset, Philippe; Ágústsson, Kristjan; Verdel, Arie; Blanck, Hanna; Franke, Steven; Specht, Sebastian; Stefánsson, Stefán; Tryggvason, Hörður; Erbas, Kemal; Deon, Fiorenza; Erlendsson, Ögmundur; Guðnason, Egill; Hersir, Gylfi; Ryberg, Trond; Halldórsdóttir, Sæunn; Weemstra, Cornelius; Bruhn, David; Flovenz, Ólafur; Friðleifsson, Ómar

    2015-04-01

    Analogue outcrops of hydrothermal fossil systems and simulating pressure/temperature conditions in the laboratory are classical methods for assessing supercritical conditions in magmatic environments. Scientific drilling is used when Earth surface sampled rocks cannot sufficiently explain past geological processes and when geophysical imaging does not sufficiently explain observed phenomena. However, our understanding of structural and dynamic characteristics of geothermal systems can be improved through application of advanced and/or innovative exploration technologies. Unlike resistivity imaging, active and passive seismic techniques have rarely been used in volcanic geothermal areas, because processing techniques were not adapted to geothermal conditions. Recent advances in volcano-seismology have introduced new processing techniques for assessing subsurface structures and controls on fluid flow in geothermal systems. We present here preliminary analyses of seismic records around a geothermal reservoir located both on-land and offshore along the Reykjanes Ridge, SW-Iceland. We deployed 214 on-land stations and 24 Ocean Bottom Seismometers since April 2014. We analyse more than 6 months of part of those records. We present first results of both travel-time tomography and ambient noise tomography and we discuss briefly implications for geothermal exploration in volcanic contexts.

  8. POPULATION DYNAMICS OF AMBIENT AND ALTERED EARTHWORM COMMUNITIES IN ROW-CROP AGROECOSYSTEMS IN OHIO, USA

    Science.gov (United States)

    Although earthworms are known to influence agroecosystem processes, there are relatively few long-term studies addressing population dynamics under cropping systems in which earthworm populations were intentionally altered. We assessed earthworm communities from fall 1994 to spr...

  9. S-wave velocities down to 1 km below the Peteroa volcano, Argentina, obtained from surface waves retrieved by means of ambient-noise seismic interferometry

    Science.gov (United States)

    Lepore, Simone; Gomez, Martin; Draganov, Deyan

    2015-04-01

    The main force driving the tectonics in South America is the subduction of the Nazca Plate below the South American plate. The subduction process generated numerous volcanoes in both Chile and Argentina, of which the majority is concentrated along the Chilean Argentine border. The recent explosive eruptions of some volcanoescaused concern of the population in both countries. At the beginning of 2012, a large temporary array was installed in the Malargüe region, Mendoza, Argentina, with the purpose of imaging the subsurface and monitoring the tectonic activity. The array was deployed until the end of 2012 to record continuously ambient noise and the local, regional, and global seismicity. It consisted of 38 seismic stations divided in two sub arrays, namely the PV array of six stations located on the east flank of the Peteroa volcano, and the T array of thirty two stations spread out on a plateau just north east of the town of Malargüe. Here,the focus will be on the PV array, which has a patch-like shape. Due to the intra-station distances, we chose to use for surface-wave retrieval the bands 0.8 Hz ÷ 4.0 Hz, 10 Hz ÷ 25 Hz. At the investigated area, most of the year there is little anthropogenic noise, which normally dominates frequencies above 1 Hz, meaning that the selected frequency bands can be used for surface-wave retrieval from noise. Using beamforming, we showed that for these bands, the noise is illuminating the stations from the west. This means that a correct surface-wave arrivals can be retrieved for station pairs oriented in that direction. Because of this, we used for retrieval only such station pairs. We cross-correlated the recordings on the vertical components and retrieved Rayleigh waves. By manual picking, we estimated for both bands velocity dispersion curves from the retrieved surface-wave arrivals. The curves were then inverted to obtain the velocity structure under the stations. The obtained S wave velocity depth profiles for the 10 Hz

  10. Constraints on temporal velocity variations associated with an underground gas storage in the Gulf of Valencia using earthquake and seismic ambient noise data

    Science.gov (United States)

    Ugalde, Arantza; Gaite, Beatriz; Villaseñor, Antonio

    2016-04-01

    During September 2013, the injection of the base gas in a depleted oil reservoir used as an underground natural gas storage (CASTOR) caused a sudden seismic activity increase in the eastern coast of Spain. As a result, a compact cluster of more than 550 earthquakes with magnitudes mbLg > 0.7 were located in the shallow offshore area of the Gulf of Valencia during two months. The strongest event, having a magnitude of Mw=4.2, was followed by two Mw=4.1 events the day after and took place once the gas injection activities had finished. Using the seismic data recorded by permanent stations at more than 25 km from the injection well, we applied coda wave interferometry to monitor changes in seismic velocity structure between similar earthquakes. Then we solved for a continuous function of velocity changes with time by combining observations from all the closely located earthquake sources. The rate of repeating events allowed measurements of relative velocity variations for about 30 days on a daily scale. To extend the analysis in time, we also processed the continuous data using the autocorrelation of band-pass filtered ambient seismic noise. A 10-day average was required to achieve a sufficient signal-to-noise ratio in the 0.2-0.5 Hz and 0.5-1 Hz frequency bands. We quantified the time lags between two traces in the frequency and time domains by means of the Moving Window Cross Spectral Analysis and a Dynamic Time Warping technique, respectively. Injection of fluids in geologic formations causes variations in seismic velocities associated to changes in fluid saturation, increase in pore pressure or opening or enlargement of cracks due to the injection process. Time delays associated with stress changes caused by moderate to large earthquakes have also been established. In this work, we found no velocity changes during the gas injection period nor on the occasion of the Mw 4.2 earthquake. The sensitivity of the method is dependent on the seismic network geometry and

  11. Determination of temporal changes in seismic velocity caused by volcanic activity in and around Hakone volcano, central Japan, using ambient seismic noise records

    Science.gov (United States)

    Yukutake, Yohei; Ueno, Tomotake; Miyaoka, Kazuki

    2016-12-01

    Autocorrelation functions (ACFs) for ambient seismic noise are considered to be useful tools for estimating temporal changes in the subsurface structure. Velocity changes at Hakone volcano in central Japan, where remarkable swarm activity has often been observed, were investigated in this study. Significant velocity changes were detected during two seismic activities in 2011 and 2013. The 2011 activity began immediately after the 2011 Tohoku-oki earthquake, suggesting remote triggering by the dynamic stress changes resulting from the earthquake. During the 2013 activity, which exhibited swarm-like features, crustal deformations were detected by Global Navigation Satellite System (GNSS) stations and tiltmeters, suggesting a pressure increment of a Mogi point source at a depth of 7 km and two shallow open cracks. Waveforms that were bandpass-filtered between 1 and 3 Hz were used to calculate ACFs using a one-bit correlation technique. Fluctuations in the velocity structure were obtained using the stretching method. A gradual decrease in the velocity structure was observed prior to the 2013 activity at the KOM station near the central cone of the caldera, which started after the onset of crustal expansion observed by the GNSS stations. Additionally, a sudden significant velocity decrease was observed at the OWD station near a fumarolic area just after the onset of the 2013 activity and the tilt changes. The changes in the stress and strain caused by the deformation sources were likely the main contributors to these decreases in velocity. The precursory velocity reduction at the KOM station likely resulted from the inflation of the deep Mogi source, whereas the sudden velocity decrease at the OWD station may reflect changes in the strain caused by the shallow open-crack source. Rapid velocity decreases were also detected at many stations in and around the volcano after the 2011 Tohoku-oki earthquake. The velocity changes may reflect the redistribution of hydrothermal

  12. Mountain building at northeastern boundary of Tibetan Plateau and craton reworking at Ordos block from joint inversion of ambient noise tomography and receiver functions

    Science.gov (United States)

    Guo, Zhen; Chen, Yongshun John

    2017-04-01

    We have obtained a high resolution 3-D crustal and uppermost mantle velocity model of the Ordos block and its surrounding areas by joint inversion of ambient noise tomography and receiver functions using seismic recordings from 320 stations. The resulting model shows wide-spread low velocity zone (Vs ≤ 3.4 km/s) in the mid-to-lower crust beneath northeastern Tibet Plateau, which may favor crustal ductile flow within the plateau. However, our model argues against the eastward crustal ductile flow beneath the Qinling belt from the Tibetan Plateau. We find high velocities in the middle part of Qinling belt which separate the low velocities in the mid-to-lower crust of the eastern Qinling belt from the low velocity zone in eastern Tibetan Plateau. More importantly, we observe significant low velocities and thickened lower crust at the Liupanshan thrust belt as the evidence for strong crustal shortening at this boundary between the northeastern Tibetan Plateau and Ordos block. The most important finding of our model is the upper mantle low velocity anomalies surrounding the Ordos block, particularly the one beneath the Trans North China Craton (TNCO) that is penetrating into the southern margin of the Ordos block for ∼100 km horizontally in the depth range of ∼70 km and at least 100 km. We propose an on-going lithospheric mantle reworking at the southernmost boundary of the Ordos block due to complicated mantle flow surrounding the Ordos block, that is, the eastward asthenospheric flow from the Tibet Plateau proposed by recent SKS study and mantle upwelling beneath the TNCO from mantle transition zone induced by the stagnant slabs of the subducted Pacific plate.

  13. 3D Vs ambient noise tomography in the source region of the 2016 Mw6.4 Meinong earthquake in Taiwan

    Science.gov (United States)

    Kuo-Chen, Hao; Chen, Kai-Xun; Sun, Wei-Fang; Ho, Chun-Wei; Lee, Yuan-Hsi; Guan, Zhuo-Kang; Kang, Chu-Chun; Chang, Wen-Yen

    2017-04-01

    Mw6.4 Meinong earthquake occurred on 6th February in 2016 in southern Taiwan and resulted in more than one hundred casualties and several building collapsed. The aftershocks mostly occurred at mid-to-lower crustal depths (10-30 km), which is related to a blind fault system. However, at the surface several centimeters of cosesimic uplift within the Liushuang, Erhchungli, and GutingKeng Formations, which is mainly composed of mudstone, have been recorded from the InSAR results. The uplifted pattern is similar to that of GPS and leveling data from 2000 to 2010, which indicates the deformation is accomplished by creeping due to the mudstone of the shallow structure related to mud diapir. Previous studies have shown limited information about the shallow structure in this region due to few seismic stations deployed. In this study, we deployed 36 temporary seismic stations ( 5 km spacing) for around one month after the main shock to obtain a 3-D shear wave shallow crustal velocity structure using ambient noise tomography. The reliable periods of group and phase velocities from Rayleigh wave are 0.6 to 5 seconds, which correspond to around 0-5 km at depths. As a result, the pattern of low S-wave speeds at 0-4 km depths corresponds to the uplift region from both of InSAR data for coseismic period and GPS and leveling data for interseismic period. Also, the results from this study are compatible with the reflected seismic profile. The results show that with dense seismic array deployment we can obtain a high resolution of subsurface image to link the relationship between the surface observations to the subsurface structures.

  14. Shallow crustal velocities and volcanism suggested from ambient noise studies using a dense broadband seismic network in the Tatun Volcano Group of Taiwan

    Science.gov (United States)

    Huang, Yu-Chih; Lin, Cheng-Horng; Kagiyama, Tsuneomi

    2017-07-01

    The Tatun Volcano Group (TVG) is situated adjacent to the Taipei metropolis and was active predominantly around 0.8-0.2 Ma (Pleistocene). Various recent lines of evidence suggest that the TVG is a potentially active volcano and that future volcanic eruptions cannot be ruled out. Geothermal activities are largely constrained to faults, but the relationship between volcanism and detailed velocity structures is not well understood. We analyzed ambient seismic noise of daily vertical components from 2014 using a dense seismic network of 40 broadband stations. We selected a 0.02° grid spacing to construct 2D and 3D shallow crustal phase velocity maps in the 0.5-3 s period band. Two S-wave velocity profiles transect Chishingshan (Mt. CS) in the shallow 3 km crust are further derived. The footwall of the Shanchiao Fault is dominated by low velocity, which may relate to Tertiary bedrock buried under andesitic lava flows dozens to hundreds of meters thick. The hanging wall of the Shanchiao Fault is the location of recent major volcanic activities. Low velocity zones in the southeast of Dayoukeng (DYK) may be interpreted as hydrothermal reservoirs or water-saturated Tertiary bedrock related to Cenozoic structures in the shallow crust. High velocities conspicuously dominate the east of the TVG, where the earliest stages of volcanism in the TVG are located, but where surface hydro-geothermal activities were absent in recent times. Between the Shanchiao Fault and Kanchiao Fault high velocities were detected, which converge below Mt. CS and may be related to early stages of magma conduits that gradually consolidated. These two faults may play a significant role with the TVG. The submarine volcanism adjacent to the Keelung coastline also requires further attention.

  15. Transition of the Slab Geometry at the Eastern End of the Trans-Mexican Volcanic Belt from Ambient Noise and Earthquake Surface Waves

    Science.gov (United States)

    Castillo, J.; Clayton, R. W.; Spica, Z.; Perez-Campos, X.

    2016-12-01

    The Trans-Mexican Volcanic Belt (TMVB) is one of the largest continental volcanic arcs on the North America plate, spanning 1200 km in central Mexico. Its diversity in volcanic style and non-parallel orientation with the trench are explained by along-strike variations in the subduction parameters of the Rivera and Cocos plates. However, the abrupt termination of the TMVB on its eastern end with the Pico de Orizaba volcano is puzzling as the transition of the Cocos flat-slab geometry to normal subduction appears to be smooth through this region. There is evidence that a tear in the slab is developing, but it is unclear how this feature can support the unusually large topographic gradient. Here, we use 6-70 s surface waves from ambient-noise cross-correlations, correlations of coda of cross-correlations, and earthquake data, to image the shear wave velocity structure to a depth of 150 km. The structures observed in the proposed velocity model are in agreement with the major tectonic features of the region. Low velocities correlate well with the active volcanos of the TMVB and the Veracruz Basin whereas high velocities coincide with the southern end of the Sierra Madre Oriental mountain range. Large velocity contrasts for the upper crust also show strong correspondence with the tectonostratigraphic terrane boundaries. A strong negative velocity perturbation that transitions to positive at 30 km depth and continues with a NE-SW orientation beneath Los Tuxtlas volcanic field is imaged and suggested to be related to the anomalous south-west dipping structure that has been evidenced by previous receiver function studies.

  16. Annoyance by aircraft noise and fear of overflying aircraft in relation to attitudes toward the environment and community

    Science.gov (United States)

    Loeb, M.; Moran, S. V.

    1977-01-01

    It has been suggested that expressions of annoyance attributable to aircraft noise may reflect in part fear of aircraft overflights and possible crashes. If this is true, then residents of areas where crashes have occurred should express more annoyance. To test this hypothesis, 50 residents of an Albany, New York area where an aircraft crash producing fatalities recently occurred and 50 residents of a comparable nearby area without such a history, were asked to respond to a 'Quality of Life Questionnaire.' Among the items were some designed to test annoyance by noise and fear of aircraft overflights. It was predicted that those in the crash area would express more fear and would more often identify aircraft as a noise source. These hypotheses were sustained. A near-replication was carried out in Louisville, Kentucky; results were much the same. Analyses indicated that for the crash-area groups, there was associating of aircraft fear and noise annoyance responses; this was true to an apparently lesser extent for non-crash groups. The greater annoyance of crash groups by aircraft community noise apparently does not carry over to situations in which aircraft noise is assessed in the laboratory.

  17. Conceptual design study of advanced acoustic composite nacelle. [for achieving reductions in community noise and operating expense

    Science.gov (United States)

    Goodall, R. G.; Painter, G. W.

    1975-01-01

    Conceptual nacelle designs for wide-bodied and for advanced-technology transports were studied with the objective of achieving significant reductions in community noise with minimum penalties in airplane weight, cost, and in operating expense by the application of advanced composite materials to nacelle structure and sound suppression elements. Nacelle concepts using advanced liners, annular splitters, radial splitters, translating centerbody inlets, and mixed-flow nozzles were evaluated and a preferred concept selected. A preliminary design study of the selected concept, a mixed flow nacelle with extended inlet and no splitters, was conducted and the effects on noise, direct operating cost, and return on investment determined.

  18. Ambient ultraviolet radiation in the Arctic reduces root biomass and alters microbial community composition but has no effects on microbial biomass

    DEFF Research Database (Denmark)

    Rinnan, R.; Keinänen, M.M.; Kasurinen, A.

    2005-01-01

    that microbial community composition was altered by UV reduction. Although the UV responses were slight considering the large dose difference between the treatments (from near-ambient to up to 90% UV-B reduction), we cannot rule out the possibility that the recovery of ozone layer would change the below...

  19. Mechanics of underwater noise

    CERN Document Server

    Ross, Donald

    1976-01-01

    Mechanics of Underwater Noise elucidates the basic mechanisms by which noise is generated, transmitted by structures and radiated into the sea. Organized into 10 chapters, this book begins with a description of noise, decibels and levels, significance of spectra, and passive sonar equation. Subsequent chapters discuss sound waves in liquids; acoustic radiation fundamentals; wind-generated ocean ambient noise; vibration isolation and structural damping; and radiation by plate flexural vibrations. Other chapters address cavitation, propeller cavitation noise, radiation by fluctuating-force (dipo

  20. Twelve-year trends in ambient concentrations of volatile organic compounds in a community of the Alberta Oil Sands Region, Canada.

    Science.gov (United States)

    Bari, Md Aynul; Kindzierski, Warren B; Spink, David

    2016-05-01

    Environmental exposure to volatile organic compounds (VOCs) in ambient air is one of a number of concerns that the First Nation Community of Fort McKay, Alberta has related to development of Canada's oil sands. An in-depth investigation of trends in ambient air VOC levels in Fort McKay was undertaken to better understand the role and possible significance of emissions from Alberta's oil sands development. A non-parametric trend detection method was used to investigate trends in emissions and ambient VOC concentrations over a 12-year (2001-2012) period. Relationships between ambient VOC concentrations and production indicators of oil sands operations around Fort McKay were also examined. A weak upward trend (significant at 90% confidence level) was found for ambient concentrations of total VOCs based on sixteen detected species with an annual increase of 0.64μg/m(3) (7.2%) per year (7.7μg/m(3) increase per decade). Indicators of production (i.e., annual bitumen production and mined oil sands quantities) were correlated with ambient total VOC concentrations. Only one of 29 VOC species evaluated (1-butene) showed a statistically significant upward trend (p=0.05). Observed geometric (arithmetic) mean and maximum ambient concentrations of selected VOCs of public health concern for most recent three years of the study period (2010-2012) were below chronic and acute health risk screening criteria of the U.S. Agency for Toxic Substances and Disease Registry and U.S. Environmental Protection Agency. Thirty-two VOCs are recommended for tracking in future air quality investigations in the community to better understand whether changes are occurring over time in relation to oil sands development activities and to inform policy makers about whether or not these changes warrant additional attention.

  1. The effects of instructions, incentive, and feedback on a community problem: dormitory noise.

    Science.gov (United States)

    Meyers, A W; Artz, L M; Craighead, W E

    A reinforcement system utilizing instructions, modelling, feedback, and group reinforcement was employed in an attempt to reduce disruptive noise on three university residence halls. A fourth hall received the same treatment program without the reinforcement component. Noise scores were determined by recording the number of discrete noise occurrences over a criterion decibel level. On all four residential floors, noise scores during treatment conditions were lower than initial and final baseline levels. Additionally, periods of noise reduction corresponded to the changing criterion multiple-baseline and reversal designs utilized. Pre- and posttreatment questionnaire responses from the three reinforcement floors paralleled changes in objective noise data. At posttreatment, residents reported less noise disturbance of study and sleep and more control over the noise situation and floor problems in general. These results indicated that a comprehensive behavior-modification treatment package was effective in reducing disruptive noise in university residence halls. Difficulties in data collection and anomalies in the data are discussed. Future directions for field-based behavior-modification research are outlined.

  2. 3D model of Campo de Dalías basement from H/V spectral ratio of ambient seismic noise

    Science.gov (United States)

    García-Jerez, Antonio; Seivane, Helena; Luzón, Francisco; Navarro, Manuel; Molina, Luis; Aranda, Carolina; Piña-Flores, José; Navarro, Francisco; Sánchez-Martos, Francisco; Vidal, Francisco; Posadas, Antonio M.; Sánchez-Sesma, Francisco J.

    2017-04-01

    Campo de Dalías is a large coastal plain in the southeastern mountain front of the Betic Cordillera (SE of the Iberian Peninsula), being one of the most seismically active regions of Spain. This area has a population of about 213.000 inhabitants, with a high growth rate during the last decades due to the development of intensive agricultural activities. Seismic risk assessment and hydrogeological issues are major topics of interest for this area, relaying on the knowledge of the geophysical properties of the basin. A passive seismic survey has been conducted throughout the basin. We have recorded ambient noise at 340 sites located approximately on the vertexes of a 1000 x 1000 m square grid, as well as around a set of deep boreholes reaching the Triassic basement. These broad-band records, of at least 45 minutes long each, have been analyzed by using the horizontal-to-vertical spectral ratio method (H/V). The spectral analysis shows clear H/V peaks with periods ranging from 0.3 s to 4 s, approximately, associated to relevant contrasts in S-wave velocity (Vs) at depth. Simulations based on the diffuse field approach (Sánchez-Sesma et al. 2011) show that long periods are explained by the effect of several hundred meters of soft sedimentary rocks (mainly Miocene marls). Well-developed high-frequency secondary peaks have been found in some specific zones (e.g. N of Roquetas de Mar town). Then, fundamental frequencies and basement depths at borehole sites have been fitted by means of a power law, which can be applied down to 900 - 970m. Larger depths are estimated by extrapolation. This relationship has been used to map the basement (main Vs contrast) throughout the plain. The prospected basement model describes well the main structural features of this smoothly folded region, namely, the El Ejido Synform and the Guardias Viejas Antiform, with ENE-WSW-trend. These features are shifted toward the south in comparison with Pedrera et al. (2015). The homogeneous

  3. Inversion of H/V in layered media from seismic ambient noise based on the diffuse field theory and on improved calculation of Green functions

    Science.gov (United States)

    Sánchez-Sesma, Francisco J.; Piña, José; García-Jerez, Antonio; Luzón, Francisco; Perton, Mathieu

    2014-05-01

    The microtremor H/V spectral ratio (MHVSR) is widely used to assess the dominant frequency of soil sites. Measurements are relatively simple as only one station is needed. It has been recently proposed a theoretical basis linking ambient noise vibrations with diffuse field theory. In this theory the directional energy density computed as the average spectral density of motion at a point, is proportional to the imaginary part of Green function at the observation point. Appropriate normalization is crucial to make the experimental spectral ratios closer to the theoretical counterpart. According to this theory the square of H/V is twice the ratio ImG11 / ImG33, where ImG11 and ImG33 are the imaginary part of Green functions at the load point for horizontal and vertical components, respectively. In order to efficiently compute the imaginary part of Green's functions in a layered medium we start from an integral on the complex k plane and, using Harkrider's nomenclature, separate formulae for body-, Rayleigh-, and Love-wave components to the spectral densities are obtained. Then the poles allow for integration using the Cauchy residue theorem plus some contributions from branch integrals. It is possible to isolate pseudo reflections from ImG11 and thus constrain the inversion of soil profile. We assess ImG11 removing the influence of illumination spectrum using the H/V spectral ratio and an estimate of ImG33 (from an a priori model) by means of ImG11=0.5(H/V )2*ImG33. It has been found that ImG33 is less sensitive to details of stratigraphy. In fact, the Poisson ratio of the uppermost layer controls the slope in high frequency. With the obtained model ImG33 can be updated and the estimate of ImG11 will be improved. ACKNOWLEDGEMENTS. This research has been partially supported by DGAPA-UNAM under Project IN104712, by the MINECO research project CGL2010-16250, Spain, by the EU with FEDER, and the AXA Research Fund.

  4. Noise Pollution

    Science.gov (United States)

    ... Search Clean Air Act Overview Share Facebook Twitter Google+ Pinterest Contact Us Clean Air Act Title IV - ... noises in the community (from your neighbor, boom cars, lawn equipment, etc.) and from commercial businesses (factory, ...

  5. Intérvalo unitario de tiempo de medición para ruido ambiental Unit timing for environmental noise measurements

    National Research Council Canada - National Science Library

    William A. Giraldo A; Alice Elizabeth González Fernández

    2011-01-01

    ...) hora, logrando de esta manera optimizar el uso de los sonómetros "fijos" y proponiendo una estrategia para reducir los costos en las mediciones de ruido ambiental y en general la elaboración de mapas de...

  6. Development of SCR Aircraft takeoff and landing procedures for community noise abatement and their impact on flight safety

    Science.gov (United States)

    Grantham, W. D.; Smith, P. M.

    1980-01-01

    Piloted simulator studies to determine takeoff and landing procedures for a supersonic cruise transport concept that result in predicted community noise levels which meet current Federal Aviation Administration (FAA) standards are discussed. The results indicate that with the use of advanced procedures, the subject simulated aircraft meets the FAA traded noise levels during takeoff and landing utilizing average flight crew skills. The advanced takeoff procedures developed involved violating three of the current Federal Aviation Regulations (FAR) noise test conditions. These were: (1) thrust cutbacks at altitudes below 214 meters (700 ft); (2) thrust cutback level below those presently allowed; and (3) configuration change, other than raising the landing gear. It was not necessary to violate any FAR noise test conditions during landing approach. It was determined that the advanced procedures developed do not compromise flight safety. Automation of some of the aircraft functions reduced pilot workload, and the development of a simple head-up display to assist in the takeoff flight mode proved to be adequate.

  7. Community Noise Exposure Resulting from Aircraft Operations: Application Guide for Predictive Procedure

    Science.gov (United States)

    1974-11-01

    word noise is in wide use in many field of technology today, but if we limit our discussion to its use in relation to sound, one may define noise...is a slow and arduous task. Of:en a great advancement in technology is required before a physical principle can be applied in a safe and reliable...Rtsldtntlal-Singlt Family, Dupltx, Mobl !t Homtt Rtsidtntial-Multiplt Family, Dormitoritt,ttc. Trantitnt Lodging School Classrooms, Libraritt

  8. 7种阔叶植物群落降噪的临界达标宽度%Critical Width of Seven Broad-leaved Plant Communities for Noise Reduction to Standard

    Institute of Scientific and Technical Information of China (English)

    祝遵凌; 杜丹; 韩笑

    2012-01-01

    There were 7 kinds of broad-leaved plant communities of some main roads in Nanjing, and they were chosen as the research object. The noise reduction effect from the plant was measured along the longitudinal road by every 5 m and moving uncertain distance. The result showed that all the average equivalent continuous A-weighted sound pressure levels of the road edge in the measuring time were beyond the limits of the corresponding provisions in GB3096-2008, out of which the highest was beyond 6 dB, the lowest beyond 1.3 dB. As the distance from the road edge increasing, the noise reduction effect of the same broad-leaved plant community was more obvious. The noise reduction effect of different broad-leaved plant communities at the same distance from the sound source were different, that closely related with the composition and the internal structure of those plant communities. Not all the noise reduction effect of plant communities had the linear relationship with the belt width. For the 7 kinds of broad-leaved plant communities, the critical width, at which the noise level reached the ambient noise limits of acoustic environmental functional area, focused on the range of 5 - 15 m. The broad-leaved plant communities in a certain width can basically meet the requirement of the noise reduction, so the broad-leaved plant communities can be widely used in the urban main roads.%选取南京市部分主干路道路绿地的7种阔叶植物群落,通过沿道路纵向每间隔5m以及不定距移动测量,结果表明:测量时间段内路缘处噪声的等效连续A声级平均值都超出GB3096—2008中相应规定的限制,其中最高的超出6dB,最低的超出1.3dB;同一阔叶植物群落,随着离开路缘的距离增加,降噪效果更加明显;不同的阔叶植物群落在同一距离处的降噪效果不同,这与植物群落的组成和内部结构特征有密切关系;植物群落的降噪效果与林带宽

  9. Criteria for environmental noise assessment

    OpenAIRE

    Hadzi-Nikolova, Marija; Mirakovski, Dejan; Doneva, Nikolinka

    2015-01-01

    The noise assessment generally refers to the assessment of noise impact from a specific source, such as noise originating from certain industrial plants, road traffic, and this is not always an easy task. Practically in every surrounding, a number of different sources contribute to the ambiental noise at a certain point. Standardization of noise level includes recommendations for noise level prescribed by legislation, which are enabling stay in the environment without danger to human heal...

  10. Toward Reduced Aircraft Community Noise Impact Via a Perception-Influenced Design Approach

    Science.gov (United States)

    Rizzi, Stephen A.

    2016-01-01

    This is an exciting time for aircraft design. New configurations, including small multi-rotor uncrewed aerial systems, fixed- and tilt-wing distributed electric propulsion aircraft, high-speed rotorcraft, hybrid-electric commercial transports, and low-boom supersonic transports, are being made possible through a host of propulsion and airframe technology developments. The resulting noise signatures may be radically different, both spectrally and temporally, than those of the current fleet. Noise certification metrics currently used in aircraft design do not necessarily reflect these characteristics and therefore may not correlate well with human response. Further, as operations and missions become less airport-centric, e.g., those associated with on-demand mobility or package delivery, vehicles may operate in closer proximity to the population than ever before. Fortunately, a new set of tools are available for assessing human perception during the design process in order to affect the final design in a positive manner. The tool chain utilizes system noise prediction methods coupled with auralization and psychoacoustic testing, making possible the inclusion of human response to noise, along with performance criteria and certification requirements, into the aircraft design process. Several case studies are considered to illustrate how this approach could be used to influence the design of future aircraft.

  11. Field Studies of the Air Force Procedures (NOISECHECK) for Measuring Community Noise Exposure from Aircraft Operations.

    Science.gov (United States)

    1982-03-01

    who assisted in the field measurements and Mrs. Norma Peachey who typed this report. 2 TABLE OF CONTENTS Page I INTRODUCTION...1812 ft 702 ft 2025 ft 3620 ft 2323 ft Slant Distance ’" J I’ 4 • l iSI ! o, APPENDIX B HOMESTEAD AFB DATA 17 TABLE B-I HOURLY NOISE LEVELS (dB) AT

  12. Music training improves speech-in-noise perception: Longitudinal evidence from a community-based music program.

    Science.gov (United States)

    Slater, Jessica; Skoe, Erika; Strait, Dana L; O'Connell, Samantha; Thompson, Elaine; Kraus, Nina

    2015-09-15

    Music training may strengthen auditory skills that help children not only in musical performance but in everyday communication. Comparisons of musicians and non-musicians across the lifespan have provided some evidence for a "musician advantage" in understanding speech in noise, although reports have been mixed. Controlled longitudinal studies are essential to disentangle effects of training from pre-existing differences, and to determine how much music training is necessary to confer benefits. We followed a cohort of elementary school children for 2 years, assessing their ability to perceive speech in noise before and after musical training. After the initial assessment, participants were randomly assigned to one of two groups: one group began music training right away and completed 2 years of training, while the second group waited a year and then received 1 year of music training. Outcomes provide the first longitudinal evidence that speech-in-noise perception improves after 2 years of group music training. The children were enrolled in an established and successful community-based music program and followed the standard curriculum, therefore these findings provide an important link between laboratory-based research and real-world assessment of the impact of music training on everyday communication skills. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Noise-induced hearing loss in agriculture: Creating partnerships to overcome barriers and educate the community on prevention

    Directory of Open Access Journals (Sweden)

    Janet J Ehlers

    2011-01-01

    Full Text Available Noise-induced hearing loss (NIHL is a common and preventable injury for farmers. Farmers are frequently exposed to excessive noise, ranking among the top three occupations and industries with the highest risk for hearing loss. Use of hearing protection among farmers is not common. Although the age when NIHL begins among farmers is unknown, its prevalence is higher among male adolescents who live and work on farms. The purpose of this paper is to describe how NIOSH created partnerships to promote hearing conservation for this hard-to-reach population. Partnerships included organizations and individuals who were trusted sources of information for the target population, young farmers 14-35 years of age and their families, and those who had linkages in rural communities. NIOSH engaged partners through exhibits and train-the-trainer workshops at state or national conventions. NIOSH workshops included basic information on NIHL as well as information on free or low-lost resources that participants could use in training others at schools and community events. People with hearing conservation expertise have an important role and many opportunities to improve the knowledge and implementation of hearing conservation among those in agriculture.

  14. Spectral ratios of ambient noise based on the diffuse field theory: Improved inversion of H/V in layered media using analytical properties of Green functions

    Science.gov (United States)

    Sanchez-Sesma, F. J.; Perton, M.; Piña, J.; Luzón, F.; Garcia-Jerez, A.; Rodriguez-Castellanos, A.

    2013-12-01

    It is well know the popularity of H/V spectral ratio to extract the dominant frequency of soil sites for microzonation studies (Nakamura, 1989). It is relatively easy to make measurements as only one station is needed. Despite its success, this approach had not solid theoretical basis until a proposal to link ambient noise vibrations with diffuse field theory was made (Sánchez-Sesma et al, 2011a). Based on this theory the average spectral density of a given motion of a point, also called directional energy density (Perton et al, 2009), is proportional to the imaginary part of Green function precisely at the observation point. The proportionality implies that vector components are all multiplied by the current spectral level of the diffuse illumination. Appropriate normalization is crucial to make the experimental spectral ratios closer to the theoretical counterpart. According to this theory the square of H/V is twice the ratio of ImG11 and ImG33, where ImG11 and ImG33 are the imaginary part of Green functions at the load point for horizontal and vertical components, respectively. From ImG11 it could be possible through Fourier analysis to extract pseudo reflections and thus constrain the inversion of soil profile. We propose to assess ImG11 removing the influence of illumination spectrum using the H/V spectral ratio and an estimate of ImG33 (obtained from a priori model) by means of ImG11=0.5(H/V)2*ImG33. It has been found that ImG33 is less sensitive to details of stratigraphy. In fact, the most relevant property is the Poisson ratio of the uppermost layer which controls the slope in high frequency (Sánchez-Sesma et al, 2011b). Pseudo-reflection seismograms are thus obtained from Fourier transform, back to time domain, of i{ImG11-ImG11HSS}, where ImG11HSS is the imaginary part of Green functions at the load point for horizontal load at the surface of a half-space with the properties of the uppermost layer. With the obtained model ImG33 can be updated and the

  15. Noise from wind turbines

    Energy Technology Data Exchange (ETDEWEB)

    Fegeant, Olivier [Royal Inst. of Tech., Stockholm (Sweden). Dept. of Building Sciences

    2002-02-01

    A rapid growth of installed wind power capacity is expected in the next few years. However, the siting of wind turbines on a large scale raises concerns about their environmental impact, notably with respect to noise. To this end, variable speed wind turbines offer a promising solution for applications in densely populated areas like the European countries, as this design would enable an efficient utilisation of the masking effect due to ambient noise. In rural and recreational areas where wind turbines are sited, the ambient noise originates from the action of wind on the vegetation and about the listener's ear (pseudo-noise). It shows a wind speed dependence similar to that of the noise from a variable speed wind turbine and can therefore mask the latter for a wide range of conditions. However, a problem inherent to the design of these machines is their proclivity to pure tone generation, because of the enhanced difficulty of avoiding structural resonances in the mechanical parts. Pure tones are deemed highly annoying and are severely regulated by most noise policies. In relation to this problem, the vibration transmission of structure-borne sound to the tower of the turbine is investigated, in particular when the tower is stiffened at its upper end. Furthermore, since noise annoyance due to wind turbine is mostly a masking issue, the wind-related sources of ambient noise are studied and their masking potentials assessed. With this aim, prediction models for wind-induced vegetation noise and pseudo-noise have been developed. Finally, closely related to the effect of masking, is the difficulty, regularly encountered by local authorities and wind farm developers, to measure noise immission from wind turbines. A new measurement technique has thus been developed in the course of this work. Through improving the signal-to-noise ratio between wind turbine noise and ambient noise, the new technique yields more accurate measurement results.

  16. Air Pollution and Preterm Birth in the U.S. State of Georgia (2002–2006): Associations with Concentrations of 11 Ambient Air Pollutants Estimated by Combining Community Multiscale Air Quality Model (CMAQ) Simulations with Stationary Monitor Measurements

    Science.gov (United States)

    Hao, Hua; Chang, Howard H.; Holmes, Heather A.; Mulholland, James A.; Klein, Mitch; Darrow, Lyndsey A.; Strickland, Matthew J.

    2015-01-01

    Background: Previous epidemiologic studies suggest associations between preterm birth and ambient air pollution. Objective: We investigated associations between 11 ambient air pollutants, estimated by combining Community Multiscale Air Quality model (CMAQ) simulations with measurements from stationary monitors, and risk of preterm birth (Darrow LA, Strickland MJ. 2016. Air pollution and preterm birth in the U.S. state of Georgia (2002–2006): associations with concentrations of 11 ambient air pollutants estimated by combining Community Multiscale Air Quality Model (CMAQ) simulations with stationary monitor measurements. Environ Health Perspect 124:875–880; http://dx.doi.org/10.1289/ehp.1409651 PMID:26485731

  17. Ambient seismic noise tomography reveals a hidden caldera and its relation to the Tarutung pull-apart basin at the Sumatran Fault Zone, Indonesia

    Science.gov (United States)

    Ryberg, Trond; Muksin, Umar; Bauer, Klaus

    2016-07-01

    We analyzed the noise recordings of a short-period seismic network to derive a shallow crustal S-wave velocity model at the Sumatra Fault in Northern Sumatra, Indonesia. By correlating the noise of 40 seismic stations' recording for 9 months, we could recover Rayleigh waves from vertical component recordings with sufficient signal-to-noise ratio. Group velocities of the Rayleigh waves could be determined in the period range from 0.71 to 4.4 s. These group velocities were used to invert for 2D group velocity maps at specific periods. Finally, the derived group velocity maps were inverted for a 3D S-wave velocity model. This model shows a region of a strong velocity decrease off the Great Sumatran Fault Zone, at the northeastern margin of the young Tarutung pull-apart basin. This observed low velocity block coincides with a caldera-like morphological feature which is interpreted as the surface expression of a hidden volcanic caldera. Considering the surface manifestations of geothermal activity around this anomaly, we conclude that the caldera is still acting as a heat source. On the other hand, the weak morphological expression at the surface indicates a certain age of the caldera which might be older than the Tarutung pull-apart basin. The findings provide important constraints on general concepts for the formation of pull-apart basins along the Sumatran fault and their relation to volcanism.

  18. The challenge of localizing vehicle backup alarms: Effects of passive and electronic hearing protectors, ambient noise level, and backup alarm spectral content

    Directory of Open Access Journals (Sweden)

    Khaled A Alali

    2011-01-01

    Full Text Available A human factors experiment employed a hemi-anechoic sound field in which listeners were required to localize a vehicular backup alarm warning signal (both a standard and a frequency-augmented alarm in 360-degrees azimuth in pink noise of 60 dBA and 90 dBA. Measures of localization performance included: (1 percentage correct localization, (2 percentage of right--left localization errors, (3 percentage of front-rear localization errors, and (4 localization absolute deviation in degrees from the alarm′s actual location. In summary, the data demonstrated that, with some exceptions, normal hearing listeners′ ability to localize the backup alarm in 360-degrees azimuth did not improve when wearing augmented hearing protectors (including dichotic sound transmission earmuffs, flat attenuation earplugs, and level-dependent earplugs as compared to when wearing conventional passive earmuffs or earplugs of the foam or flanged types. Exceptions were that in the 90 dBA pink noise, the flat attenuation earplug yielded significantly better accuracy than the polyurethane foam earplug and both the dichotic and the custom-made diotic electronic sound transmission earmuffs. However, the flat attenuation earplug showed no benefit over the standard pre-molded earplug, the arc earplug, and the passive earmuff. Confusions of front-rear alarm directions were most significant in the 90 dBA noise condition, wherein two types of triple-flanged earplugs exhibited significantly fewer front-rear confusions than either of the electronic muffs. On all measures, the diotic sound transmission earmuff resulted in the poorest localization of any of the protectors due to the fact that its single-microphone design did not enable interaural cues to be heard. Localization was consistently more degraded in the 90 dBA pink noise as compared with the relatively quiet condition of the 60 dBA pink noise. A frequency-augmented backup alarm, which incorporated 400 Hz and 4000 Hz components

  19. Long-term exposure to ambient air pollution and traffic noise and incident hypertension in seven cohorts of the European study of cohorts for air pollution effects (ESCAPE).

    Science.gov (United States)

    Fuks, Kateryna B; Weinmayr, Gudrun; Basagaña, Xavier; Gruzieva, Olena; Hampel, Regina; Oftedal, Bente; Sørensen, Mette; Wolf, Kathrin; Aamodt, Geir; Aasvang, Gunn Marit; Aguilera, Inmaculada; Becker, Thomas; Beelen, Rob; Brunekreef, Bert; Caracciolo, Barbara; Cyrys, Josef; Elosua, Roberto; Eriksen, Kirsten Thorup; Foraster, Maria; Fratiglioni, Laura; Hilding, Agneta; Houthuijs, Danny; Korek, Michal; Künzli, Nino; Marrugat, Jaume; Nieuwenhuijsen, Mark; Östenson, Claes-Göran; Penell, Johanna; Pershagen, Göran; Raaschou-Nielsen, Ole; Swart, Wim J R; Peters, Annette; Hoffmann, Barbara

    2017-04-01

    We investigated whether traffic-related air pollution and noise are associated with incident hypertension in European cohorts. We included seven cohorts of the European study of cohorts for air pollution effects (ESCAPE). We modelled concentrations of particulate matter with aerodynamic diameter ≤2.5 µm (PM2.5), ≤10 µm (PM10), >2.5, and ≤10 µm (PMcoarse), soot (PM2.5 absorbance), and nitrogen oxides at the addresses of participants with land use regression. Residential exposure to traffic noise was modelled at the facade according to the EU Directive 2002/49/EC. We assessed hypertension as (i) self-reported and (ii) measured (systolic BP ≥ 140 mmHg or diastolic BP ≥ 90 mmHg or intake of BP lowering medication (BPLM). We used Poisson regression with robust variance estimation to analyse associations of traffic-related exposures with incidence of hypertension, controlling for relevant confounders, and combined the results from individual studies with random-effects meta-analysis. Among 41 072 participants free of self-reported hypertension at baseline, 6207 (15.1%) incident cases occurred within 5-9 years of follow-up. Incidence of self-reported hypertension was positively associated with PM2.5 (relative risk (RR) 1.22 [95%-confidence interval (CI):1.08; 1.37] per 5 µg/m³) and PM2.5 absorbance (RR 1.13 [95% CI:1.02; 1.24] per 10 - 5m - 1). These estimates decreased slightly upon adjustment for road traffic noise. Road traffic noise was weakly positively associated with the incidence of self-reported hypertension. Among 10 896 participants at risk, 3549 new cases of measured hypertension occurred. We found no clear associations with measured hypertension. Long-term residential exposures to air pollution and noise are associated with increased incidence of self-reported hypertension.

  20. Community intervention in higher education of environmental health Intervencion comunitaria en la educación superior de salud ambiental Intervenção comunitária no ensino superior de saúde ambiental

    Directory of Open Access Journals (Sweden)

    Raquel Rodrigues dos Santos

    2012-08-01

    Full Text Available Currently, in the Bologna context, university teaching methods focus on the student and on a learning experience based on practical methods. Under the guidance of teachers, students in the second year of the first Environmental Health Course at the Polytechnic Institute of Beja have designed and developed the following nine community intervention projects relating to environmental health: dangerous products (mercury; habitability and geriatrics; health education and the environment; drinking water; information and communication in environmental health; efficient use of resources in public buildings; child development in outdoor spaces; and allergenic factors in housing. This pedagogical action takes place over three semesters, corresponding to the three distinct phases: design, implementation and evaluation / dissemination. To ensure the viability of the projects, each group of three students has established partnerships with various entities, such as city and parish councils, hospitals, schools, consumer cooperatives, companies dealing with hazardous waste, the Youth Institute and other commercial enterprises. Although it has not been possible to evaluate the whole project, preliminary results suggest that the planned activities have been very successful, with health benefits for the people involved, through environmental improvements or an increase in empowerment. It was also possible to achieve economic gains and contribute to the conservation of the environment. The students were able to gain skills and knowledge in a teaching model characterized by the absence of lectures in which students, assisted by teachers, take decisions and independent action, simulating a real context of professional practice. This experience suggests that, by utilizing the Bologna method, the polytechnic institutions may improve their real contribution to the health of communities.Actualmente y en el marco del Plan de Bolonia, las actividades docentes

  1. Nutritional Noise: Community Literacies and the Movement against Foods Labeled as "Natural"

    Science.gov (United States)

    Trauth, Erin

    2015-01-01

    In the face of the $44 billion market--and rising--for foods labeled as "natural" (despite any formal regulatory oversight on the use of this term), this article examines multiple complex layers of community literacies and movements involving foods labeled as "natural," including an increasing availability of…

  2. Classroom Noise and Teachers' Voice Production

    Science.gov (United States)

    Rantala, Leena M.; Hakala, Suvi; Holmqvist, Sofia; Sala, Eeva

    2015-01-01

    Purpose: The aim of this study was to research the associations between noise (ambient and activity noise) and objective metrics of teachers' voices in real working environments (i.e., classrooms). Method: Thirty-two female and 8 male teachers from 14 elementary schools were randomly selected for the study. Ambient noise was measured during breaks…

  3. 49 CFR 325.55 - Ambient conditions; stationary test.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Ambient conditions; stationary test. 325.55... MOTOR CARRIER NOISE EMISSION STANDARDS Measurement of Noise Emissions; Stationary Test § 325.55 Ambient conditions; stationary test. (a)(1) Sound. The ambient A-weighted sound level at the microphone...

  4. Ambient Space and Ambient Sensation

    DEFF Research Database (Denmark)

    Schmidt, Ulrik

    The ambient is the aesthetic production of the sensation of being surrounded. As a concept, 'ambient' is mostly used in relation to the music genre 'ambient music' and Brian Eno's idea of environmental background music. However, the production of ambient sensations must be regarded as a central...... aspect of the aesthetization of modern culture in general, from architecture, transport and urbanized lifeforms to film, sound art, installation art and digital environments. This presentation will discuss the key aspects of ambient aesthetization, including issues such as objectlessness...

  5. EPISTEMOLOGIA AMBIENTAL

    OpenAIRE

    2012-01-01

    O livro Epistemologia Ambiental traz uma rica discussão sobre a questão ambiental, abordando teorias relevantes para o entendimento e interpretação da crise atual, orientando para a construção de novas racionalidades e a constituição de um saber ambiental. A obra vem compartimentada em cinco capítulos distribuídos em 240 páginas. 

  6. Velocity variations associated with the large 2010 eruption of Merapi volcano, Java, retrieved from seismic multiplets and ambient noise cross-correlation

    Science.gov (United States)

    Budi-Santoso, Agus; Lesage, Philippe

    2016-07-01

    We present a study of the seismic velocity variations that occurred in the structure before the large 2010 eruption of Merapi volcano. For the first time to our knowledge, the technique of coda wave interferometry is applied to both families of similar events (multiplets) and to correlation functions of seismic noise. About half of the seismic events recorded at the summit stations belong to one of the ten multiplets identified, including 120 similar events that occurred in the last 20 hr preceding the eruption onset. Daily noise cross-correlation functions (NCF) were calculated for the six pairs of short-period stations available. Using the stretching method, we estimate time-series of apparent velocity variation (AVV) for each multiplet and each pair of stations. No significant velocity change is detected until September 2010. From 10 October to the beginning of the eruption on 26 October, a complex pattern of AVV is observed with amplitude of up to ±1.5 per cent. Velocity decrease is first observed from families of deep events and then from shallow earthquakes. In the same period, AVV with different signs and chronologies are estimated from NCF calculated for various station pairs. The location in the horizontal plane of the velocity perturbations related with the AVV obtained from NCF is estimated by using an approach based on the radiative transfer approximation. Although their spatial resolution is limited, the resulting maps display velocity decrease in the upper part of the edifice in the period 12-25 October. After the eruption onset, the pattern of velocity perturbations is significantly modified with respect to the previous one. We interpret these velocity variations in the framework of a scenario of magmatic intrusion that integrates most observations. The perturbation of the stress field associated with the magma migration can induce both decrease and increase of the seismic velocity of rocks. Thus the detected AVVs can be considered as precursors of

  7. Noise suppression by noise

    OpenAIRE

    Vilar, J. M. G.; Rubí Capaceti, José Miguel

    2001-01-01

    We have analyzed the interplay between an externally added noise and the intrinsic noise of systems that relax fast towards a stationary state, and found that increasing the intensity of the external noise can reduce the total noise of the system. We have established a general criterion for the appearance of this phenomenon and discussed two examples in detail.

  8. Derecho Ambiental

    OpenAIRE

    2014-01-01

    Es indudable la relevancia para la vida del planeta proteger el ambiente. De ahí que a lo largo de las últimas decadas el derecho ambiental se ha consolidado como una nueva y vital rama del derecho público.

  9. Det ambiente

    DEFF Research Database (Denmark)

    Schmidt, Ulrik

    Om begrebet "det ambiente", der beskriver, hvad der sker, når vi fornemmer baggrundsmusikkens diskrete beats, betragter udsigten gennem panoramavinduet eller tager 3D-brillerne på og læner os tilbage i biografsædet. Bogen analyserer, hvorfan ambiente oplevelser skabes, og hvilke konsekvenser det...

  10. Evaluation of community response to wind turbine-related noise in western New York state.

    Science.gov (United States)

    Magari, Shannon R; Smith, Clinton E; Schiff, Martin; Rohr, Annette C

    2014-01-01

    As the boundaries of harvesting wind energy expand to meet the ever-increasing societal energy demands, the number and size of wind turbines being constructed rises. As part of a larger project to monitor sound in an operating wind park in western New York State, a cross-sectional survey was conducted among individuals living in and around the wind park to characterize the perception, level of annoyance, and self-reported health effects of residents. We conducted the study in a 126 MW wind park consisting of 84 turbines spanning approximately 19 square miles of farmland. Short-term outdoor and indoor sound level measurements were also performed at each dwelling in which a questionnaire was administered. To our knowledge, this study is the first to collect sound measurements at individual residences. There was no apparent exposure-response relationship between an individual's level of annoyance and the short duration sound measurements collected at the time of the survey. There was a correlation between an individual's concern regarding health effects and the prevalence of sleep disturbance and stress among the study population. The siting process is unique to each community with varying degrees of success. Additional sound level measurements inside and outside homes in larger cohorts in concert with detailed questionnaires would be useful in verifying those exposure-response relationships found in studies using calculated sound level data. Additional research should include a detailed investigation of sleep patterns and possible disturbance in those living in and near operating wind turbine projects.

  11. Evaluation of community response to wind turbine-related noise in Western New York State

    Directory of Open Access Journals (Sweden)

    Shannon R Magari

    2014-01-01

    Full Text Available As the boundaries of harvesting wind energy expand to meet the ever-increasing societal energy demands, the number and size of wind turbines being constructed rises. As part of a larger project to monitor sound in an operating wind park in western New York State, a cross-sectional survey was conducted among individuals living in and around the wind park to characterize the perception, level of annoyance, and self-reported health effects of residents. We conducted the study in a 126 MW wind park consisting of 84 turbines spanning approximately 19 square miles of farmland. Short-term outdoor and indoor sound level measurements were also performed at each dwelling in which a questionnaire was administered. To our knowledge, this study is the first to collect sound measurements at individual residences. There was no apparent exposure-response relationship between an individual′s level of annoyance and the short duration sound measurements collected at the time of the survey. There was a correlation between an individual′s concern regarding health effects and the prevalence of sleep disturbance and stress among the study population. The siting process is unique to each community with varying degrees of success. Additional sound level measurements inside and outside homes in larger cohorts in concert with detailed questionnaires would be useful in verifying those exposure-response relationships found in studies using calculated sound level data. Additional research should include a detailed investigation of sleep patterns and possible disturbance in those living in and near operating wind turbine projects.

  12. Det Ambiente

    DEFF Research Database (Denmark)

    Schmidt, Ulrik

    Det ambiente er iscenesættelsen af en karakteristisk sanseoplevelse, der er kendetegnet ved fornemmelsen af at være omgivet. I dag bliver begrebet om det ambiente mest anvendt i forbindelse med musikgenren ’ambient musik’. Det ambiente er dog ikke essentielt knyttet til det musikalske, men må...... forstås som et betydeligt bredere fænomen i den moderne æstetiske kultur, der spiller en væsentlig rolle i oplevelsen af moderne transportformer, arkitektur, film, lydkunst, installationskunst og digitale multimedieiscenesættelser. En forståelse af det ambiente er derfor centralt for forståelsen af en...... moderne æstetiseret oplevelseskultur i almindelighed. Da det ambiente ikke hidtil har været gjort til genstand for en mere indgående teoretisk behandling, er der dog stor usikkerhed omkring, hvad fænomenet overhovedet indebærer. Hovedformålet med Det ambiente – Sansning, medialisering, omgivelse er derfor...

  13. Environmental radioactivity measurements in the autonomous community of Aragon; Medidas de la radiactividad ambiental en la comunidad autonoma de Aragon

    Energy Technology Data Exchange (ETDEWEB)

    Calvete, H.; Carrion, A.; Gale, C.; Garcia, E.; Nunez-Lagos, R.; Perez, C.; Puimedon, J.; Rodriguez, S.; Sanchez, P.; Sarsa, M. L.; Villar, J. A.

    2011-07-01

    To know the level of environmental radioactivity in the Autonomous Community of Aragon thermoluminescent dosimeters used to measure the cumulative dose over a period of time in each of its 33 counties. The project, funded by the Government of Aragon and La Caixa to carry a map of environmental radioactivity with the collaboration of Secondary Schools and public schools for the renovation and shipment of dosimeters. The selection of the different locations was carried out taking into account the points of interest in the project reflected Marna, by ENUSA and the CSN, on natural gamma radiation. The work program began in 2009 and to date working with 43 centers distributed throughout the community tried to cover a wide surface area of Aragon. (Author)

  14. 3-D shear wave velocity model of Mexico and South US: bridging seismic networks with ambient noise cross-correlations (C1) and correlation of coda of correlations (C3)

    Science.gov (United States)

    Spica, Zack; Perton, Mathieu; Calò, Marco; Legrand, Denis; Córdoba-Montiel, Francisco; Iglesias, Arturo

    2016-09-01

    This work presents an innovative strategy to enhance the resolution of surface wave tomography obtained from ambient noise cross-correlation (C1) by bridging asynchronous seismic networks through the correlation of coda of correlations (C3). Rayleigh wave group dispersion curves show consistent results between synchronous and asynchronous stations. Rayleigh wave group traveltimes are inverted to construct velocity-period maps with unprecedented resolution for a region covering Mexico and the southern United States. The resulting period maps are then used to regionalize dispersion curves in order to obtain local 1-D shear velocity models (VS) of the crust and uppermost mantle in every cell of a grid of 0.4°. The 1-D structures are obtained by iteratively adding layers until reaching a given misfit, and a global tomography model is considered as an input for depths below 150 km. Finally, a high-resolution 3-D VS model is obtained from these inversions. The major structures observed in the 3-D model are in agreement with the tectonic-geodynamic features and with previous regional and local studies. It also offers new insights to understand the present and past tectonic evolution of the region.

  15. Multispectral Analysis of Surface Wave (MASW) Analysis of Near-Surface Structure at Brady Hot Springs from Active Source and Ambient Noise Using a 8700-meter Distributed Acoustic Sensing (DAS) Array

    Science.gov (United States)

    Wang, H. F.; Lord, N. E.; Zeng, X.; Fratta, D.; Feigl, K. L.; Team, P.

    2016-12-01

    The Porotomo research team deployed 8700-meters of Distributed Acoustic Sensing (DAS) cable in a shallow trench on the surface and 400 meters down a borehole at Brady Hot Springs, Nevada in March 2016. The goal of the experiment was to detect changes in geophysical properties associated with hydrologic changes. The DAS cable occupied a natural laboratory of 1500-by-500-by-400-meters overlying a commercial, geothermal field operated by Ormat Technologies. The DAS cable was laid out in three parallel zig-zag lines with line segments approximately 120-meters in length. A large Vibroseis truck (T-Rex) provided the seismic source with a sweep frequency between 5 and 80 Hz over 20 seconds. Over the 15 days of the experiment, the Vibroseis truck re-occupied approximately 250 locations outside and within the array days while changes were made in water reinjection from the power plant into wells in the field. At each source location, one vertical and two orthogonal horizontal modes were excited. Dispersion curves were constructed using MASW and a Vibroseis source location approximately in line with each DAS cable segment or from ambient noise correlation functions. Representative fence diagrams of S-wave profiles were constructed by inverting the dispersion curves obtained for several different line segments.

  16. Synchronized pulsed LED algorithm for ambient infrared noise minimization in FTIR-based multi-touch systems%基于同步脉冲光源的抗环境红外FTIR多点触摸算法

    Institute of Scientific and Technical Information of China (English)

    李江晨; 徐小维; 韩君佩; 胡昱; 邹雪城

    2013-01-01

      多点触摸技术已应用在生活的诸多方面,带来了人机交互上的巨大便利。在多种新型的基于视觉的多点触摸技术中FTIR技术是极具潜力的优势技术,但是该技术会受环境红外噪声干扰,不能有效识别日光环境下的手指触点信号。针对环境红外噪声干扰的问题,提出了一种基于同步脉冲光源的相邻帧差算法(SPLA)使得FTIR技术具有良好的抗环境红外噪声的特点,可在日光环境中有效识别手指触点。同时还构建了嵌入同步脉冲光源的多点触摸硬件平台,实现了SPLA算法,并进行了大量的触摸实验。实验结果表明,相比于传统的背景差算法,SPLA算法的触点对比度提高了将近3.5倍,可以准确地识别出触摸点。鉴于硬件实现的通用性,SPLA算法还可应用到其他多点触摸平台,具有较强的可移植性。%The multi-touch technology has been widely used in various aspects of the every-day life, and has brought tremendous convenience during the process of the human-computer interaction. Among many new vision-based implementation methods for the multi-touch function, the frustrated total internal reflection (FTIR) method is one of the most promising one with unique advantages. However, the FTIR-based multi-touch implementation is sensitive to the ambient infrared noise and it currently can only be used in the dark environment. In this paper, a synchronized pulsed LED algorithm was proposed, namely SPLA, which could effectively improve the sensitivity of the FTIR-based multi-touch implementation in the normal ambient lighting environment. Based on the SPLA, a FTIR-based multi-touch platform was implemented . The experimental results show that the proposed SPLA increases the contrast of the blobs (touch points) by 3.5 times compared with the conventional methods. Because of similar hardware structure, the proposed SPLA can be also extended to minimize the ambient noise for

  17. THE ACOUSTIC CONTAMINATION OF SCHOOL ENVIRONMENT DUE TO URBAN NOISES IN THE FEDERAL DISTRICT, BRASIL = A CONTAMINAÇÃO ACÚSTICA DE AMBIENTES ESCOLARES DEVIDO AOS RUÍDOS URBANOS NO DISTRITO FEDERAL, BRASIL

    Directory of Open Access Journals (Sweden)

    Alexandre Eniz

    2006-01-01

    Full Text Available Urban noises are more and more presents in our daily life, invading residences, work places, leisure locations, hospitals and schools, becoming a potential harm to social interaction, communication, behavior, school performance, health etc. The main objective of this work was to analyze and quantify the environmental noise in ten schools of the basic education in District Federal, Brazil. The adopted parameter was the equivalent sound pressure level Leq (A, which was evaluated according to the sound level measures following the standard established by Brazilian Association of echnical Regulations (ABNT. The background noise was measured during holidays and during regular class periods. The study detected that half of the schools researched are being “contaminated” with noise from aircraft, road traffic, trucks, advertising vehicles, motorcycles, buses among other sources, with limits outside the recommended by law. In 90% of the evaluated schools, the noise levels observed during the activities are above of the maximum values recommended for the acoustic comfort of a school. These are buildings ill-located in the city and therefore “exposed” to levels that are above of recommended by the norms. The results show a critical situation indicating the urgent need of actions with the objective of mitigating this severe type of pollution. = Os ruídos urbanos estão cada vez mais presentes em nosso cotidiano, invadindo residências, locais de trabalho, de lazer, hospitais e escolas, podendo prejudicar as relações sociais, a comunicação, o comportamento, o rendimento escolar, a saúde etc. O objetivo principal deste trabalho foi analisar e quantificar o ruído ambiental em dez escolas do Ensino Fundamental e Médio no Distrito Federal. O parâmetro adotado foi o nível de pressão sonora equivalente Leq (A, avaliado por medidores de pressão sonora, segundo as normas estabelecidas pela Associação Brasileira de NormasTécnicas (ABNT. O ru

  18. Influence of applied voltage on the performance of bioelectrochemical anaerobic digestion of sewage sludge and planktonic microbial communities at ambient temperature.

    Science.gov (United States)

    Feng, Qing; Song, Young-Chae; Bae, Byung-Uk

    2016-11-01

    The influence of applied voltage on the bioelectrochemical anaerobic digestion of sewage sludge was studied at ambient temperature (25±2°C). The stability of the bioelectrochemical anaerobic digestion was considerably good in terms of pH, alkalinity and VFAs at 0.3V and 0.5V, but VFA accumulation occurred at 0.7V. The specific methane production rate (370mLCH4/L.d) was the highest at 0.3V, but the methane content (80.6%) in biogas and the methane yield (350mLCH4/gCODr) were higher at 0.5V, significantly better than those of 0.7V. The VS removal efficiency was 64-66% at 0.3V and 0.5V, but only 31% at 0.7V. The dominant species of planktonic microbial communities was Cloacamonas at 0.3V and 0.5V, but the percentage of hydrolytic bacteria species such as Saprospiraceae, Fimbriimonas, and Ottowia pentelensis was much higher at 0.7V. The optimal applied voltage for bioelectrochemical anaerobic digestion was 0.3-0.5V according to digestion performance and planktonic microbial communities.

  19. THE EXPOSURE PARADOX IN PARTICULATE MATTER COMMUNITY TIME-SERIES EPIDEMIOLOGY: CAN AMBIENT CONCENTRATIONS OF PM BE USED AS A SURROGATE FOR PERSONAL EXPOSURE TO PM ?

    Science.gov (United States)

    Objective: Explain why epidemiologic studies find a statistically significant relationship between ambient concentrations of PM and health effects even though only a near-zero correlation is found between ambient concentrations of PM and personal exposures to PM. Method: Consider...

  20. THE EXPOSURE PARADOX IN PARTICULATE MATTER COMMUNITY TIME-SERIES EPIDEMIOLOGY: CAN AMBIENT CONCENTRATIONS OF PM BE USED AS A SURROGATE FOR PERSONAL EXPOSURE TO PM ?

    Science.gov (United States)

    Objective: Explain why epidemiologic studies find a statistically significant relationship between ambient concentrations of PM and health effects even though only a near-zero correlation is found between ambient concentrations of PM and personal exposures to PM. Method: Consider...

  1. The impact of wood smoke on ambient PM{sub 2.5} in northern Rocky Mountain valley communities

    Energy Technology Data Exchange (ETDEWEB)

    Ward, Tony, E-mail: tony.ward@umontana.ed [Center for Environmental Health Sciences, The University of Montana, Missoula, MT 59812 (United States); Lange, Todd [NSF-Arizona AMS Facility, The University of Arizona, Tucson, AZ (United States)

    2010-03-15

    During the winters of 2006/2007 and 2007/2008, PM{sub 2.5} source apportionment programs were carried out within five western Montana valley communities. Filter samples were analyzed for mass and chemical composition. Information was utilized in a Chemical Mass Balance (CMB) computer model to apportion the sources of PM{sub 2.5}. Results showed that wood smoke (likely residential woodstoves) was the major source of PM{sub 2.5} in each of the communities, contributing from 56% to 77% of the measured wintertime PM{sub 2.5}. Results of {sup 14}C analyses showed that between 44% and 76% of the measured PM{sub 2.5} came from a new carbon (wood smoke) source, confirming the results of the CMB modeling. In summary, the CMB model results, coupled with the {sup 14}C results, support that wood smoke is the major contributor to the overall PM{sub 2.5} mass in these rural, northern Rocky Mountain airsheds throughout the winter months. - This manuscript describes how woodsmoke is the largest source of PM2.5 in the Northern Rocky Mountains of the US.

  2. Optimal linear array heading in a directional noise field

    OpenAIRE

    McDonnell, David C.

    1992-01-01

    Approved for public release; distribution is unlimited. This thesis discusses a procedure that optimizes the signal-to-noise ratio (SNR) detected by a linear array in a directional ambient noise field. The SNR can be optimized by minimizing the ambient noise detected by the array. For a given target location, each possible heading of the array centers the ambiguous beam of the array at a different true bearing. Therefore, each heading of the array will receive a different ambient noise lev...

  3. Road traffic noise and incident myocardial infarction

    DEFF Research Database (Denmark)

    Sørensen, Mette; Andersen, Zorana Jovanovic; Nordsborg, Rikke B;

    2012-01-01

    Both road traffic noise and ambient air pollution have been associated with risk for ischemic heart disease, but only few inconsistent studies include both exposures.......Both road traffic noise and ambient air pollution have been associated with risk for ischemic heart disease, but only few inconsistent studies include both exposures....

  4. 噪音环境下桥梁损伤声发射定位技术研究%Research on the location technology of bridge damage based on acoustic emission under ambient noise

    Institute of Scientific and Technical Information of China (English)

    刘茂军; 葛若东; 王根伟

    2015-01-01

    为研究噪音环境下桥梁损伤的声发射定位方法,并获取相应的技术参数,在一座运营中的预应力钢筋混凝土桥梁的箱梁内部进行了声发射定位试验,通过定位参数的选取、断铅模拟损伤的声发射定位试验、声发射信号的滤波除噪、定位图聚类等一系列试验,达到了比较满意的定位效果,定位误差控制在50 mm以内,并获得了桥梁检测中的声发射门槛值、定位波速以及三个定位时间参数值[峰值定义时间( PDT)、撞击定义时间( HDT)、撞击锁闭时间( HLT)]。试验结果表明,在运营桥梁上进行声发射损伤定位时,门槛值设为40 dB可以滤除大部分环境噪音,同时通过关联图对比分析、利用数字滤波除噪,并对定位图进行聚类,可以进一步提高定位精度,最终误差可以控制在50 mm以内。研究结果可为声发射损伤定位技术在桥梁检测及监测方面的推广应用提供借鉴。%In order to develop abridge damage location method under ambient noise and to obtain corresponding acoustic emission parameters, an acoustic emission location test was performed in the box girder of an in-service pre-stressed concrete bridge. By selecting location parameters, by per-forming acoustic emission location test and breaking leads to simulate damage, by filtering acoustic emission signal and locating graph clustering, a relatively satisfying location effect is obtained with the location error controlled in less than 50 mm. The acoustic emission detection threshold, the wave velocity, as well as the three location time values including the peak definition time (PDT), hit def-inition time ( HDT) and hit locking time ( HLT) were obtained. The test shows that, during the lo-cation of damage by acoustic emission on an in-service bridge, most of the ambient noise can be fil-tered out by setting the threshold value to 40 dB, and through the correlation diagram analysis, the use of

  5. Ambient intelligence

    OpenAIRE

    Sanders, David; Gegov, Alexander

    2006-01-01

    This paper considers some history and the state of the art of Ambient Intelligence and from that seeks to identify new topics and future work. Ubiquitous computing, communications, human-centric computer interaction, embedded systems, context awareness, adaptive systems and distributed device networks are considered.

  6. Study of environmental noise in a BWR plant like the Nuclear Power Plant Laguna Verde; Estudio de ruido ambiental en una planta BWR como la Central Nuclear Laguna Verde

    Energy Technology Data Exchange (ETDEWEB)

    Tijerina S, F.; Cruz G, M.; Amador C, C., E-mail: francisco.tijerina@cfe.gob.mx [Comision Federal de Electricidad, Central Nucleoelectrica Laguna Verde, Subgerencia de Ingenieria, Carretera Cardel-Nautla Km. 42.5, Alto Lucero, Veracruz (Mexico)

    2013-10-15

    In all industry type the health costs generated by the noise are high, because the noise can cause nuisance and to harm the capacity to work when causing tension and to perturb the concentration, and in more severe cases to reach to lose the sense of the hearing in the long term. The noise levels in the industry have been designated for the different types of use like residential, commercial, and industrial and silence areas. The noise can cause accidents when obstructing the communications and alarm signs. For this reason the noise should be controlled and mitigated, at a low level as reasonably is possible, taking into account that the noise is an acoustic contamination. The present study determines a bases line of the environmental noise levels in a nuclear power plant BWR-5 as Laguna Verde, (like reference) to be able to determine and to give pursuit to the possible solutions to eliminate or to limit the noise level in the different job areas. The noise levels were registered with a meter of integrative noise level (sonometer) and areas of noise exposure levels mapping the general areas in the buildings were established, being the registered maximum level of 96.94 dba in the building of the Reactor-elevation 0.65 m under the operation conditions of Extended Power Up rate (EPU) of 120% PTN. Knowing that the exposition to noises and the noise dose in the job place can influence in the health and in the safety of the workers, are extensive topics that they should be analyzed for separate as they are: to) the effects in the health of the exposure to the noise, b) how measuring the noise, c) the methods and technologies to combat and to control the noise in the industry by part of engineering area and d) the function of the industrial safety bodies as delegates of the health and safety in the task against the noise in the job. (author)

  7. Noise levels at critical points in the municipality of Guadalajara, Jalisco, Mexico

    Science.gov (United States)

    Figueroa, Arturo; Garcia, Jesus; Macias, Jorge; Orozco, Martha; Garcia, Javier; Delgadillo, Alan

    2002-11-01

    Studies of acoustic conditions are planning tools on which we can diagnose the problem of noise pollution in the cities. The first study on noise pollution made in the city was made by the University of Guadalajara in 1995 and updated in 1998 covering with measuring points the city center. This paper discusses the problem of noise pollution by motor vehicles at critical points and covers a total of 105 points. The study also analyzes the problem of noise pollution base on the community annoyance from which a regulation policy should derive. Results of the study show that the most critical points are located within zone 1 (center) where Leq levels within the range of 70-85 dB were found. Such levels exceed by far the international standard of 65 dB as recommended for ambient noise by the World Health Organization.

  8. Sounding Off about Noise

    Science.gov (United States)

    Crumpton, Michael A.

    2005-01-01

    Noise in a community college library can be part of the nature of the environment. It can also become a huge distraction for those who see the library as their sanctuary for quiet study and review of resources. This article describes the steps that should be taken by library staff in order to be proactive about noise and the library environment,…

  9. Preliminary Study of Shear Wave Velocity Structure of Hebei and Surrounding Areas from Ambient Seismic Noise%基于背景噪声初步研究河北及邻区的剪切波速度结构

    Institute of Scientific and Technical Information of China (English)

    刘丽; 宫猛; 胡斌; 曾祥方; 罗艳

    2012-01-01

    We present the surface wave dispersion results of the application of the ambient noise method to broad-band data recorded at 83 stations from digital seismic networks of the Hebei and surrounding areas. Firstly we used the multiple-filter analysis method to extract surface wave group velocity dispersion curves from inter-station paths at periods from 5 to 50 s. Then using linear inversion method to obtain shear wave velocity distribution. The results of group and shear wave velocity distribution maps generally demonstrate good correlations with surface geological and tectonic features. The results of the group velocity tomography show that at short periods (8 — 20 s) , basin areas are clearly resolved with low group velocity due to its thick sedimentary layer, and the uplift areas show relative higher group velocity distribution. With the increase of period O20 s) the group velocity distribution changed, and velocity gap between the basin and uplift areas had reduced after the 30 s period, due to the thickness of the Earth's crust, and beneath the middle-lower the shear wave velocity increase with depth. Our results alsoshow that in this study the dominated noise sources come from the north-west.%本文根据2010年1~12月河北及邻区的83个宽频地震仪12个月连续噪声记录,分析了河北及邻区瑞利面波的群速度频散曲线并反演了主要分区内的典型路径剪切波速度结构.首先采用多重滤波方法提取了台站对5~50 s的面波群速度频散曲线,然后用Herrmann线性反演方法反演了剪切波速度结构.结果表明,群速度频散曲线及剪切波速度分布特征与地表地质和构造特征表现出较好的相关性,清晰地揭示了地壳内部的横向速度变化.在短周期(8~20s),拥有较厚的沉积层的平原地区表现为明显的低速特征,而隆起地区则表现为较高的群速度分布特征:随着周期的增加(>20 s)速度的特征有所改变,30 s之后由于受地壳

  10. Rating environmental noise on the basis of noise maps

    NARCIS (Netherlands)

    Miedema, H.M.E.; Borst, H.C.

    2006-01-01

    A system that rates noise on the basis of noise maps has been developed which is based on empirical exposure-response relationships, so that effects in the community will be lower if the system gives a better rating. It is consistent with noise metrics and effect endpoint chosen in the EU, i.e., it

  11. Compreendendo o ambiente em Psicologia Ambiental

    OpenAIRE

    Lenelis Kruse

    2005-01-01

    O presente artigo consiste nas respostas às seguintes perguntas, propostas e respondidas pela autora: De que modo você, como uma psicóloga ambiental ou pesquisadora ambiente-comportamento: define o ambiente; leva em conta o ambiente em sua pesquisa; que tipo de teorias necessitamos para responder pelas relações pessoas-ambiente mais efetivamente; a interação entre as pessoas e o ambiente foi suficiente e adequadamente explicada na Psicologia Ambiental; de que modo esta interação poderia ser e...

  12. A influência do ruído ambiental no desempenho de escolares nos testes de padrão tonal de frequência e padrão tonal de duração Environmental noise influence on student performance in the Frequency Pattern Tests and Duration Pattern Tests

    Directory of Open Access Journals (Sweden)

    Ludimila Souza Nascimento

    2012-06-01

    Full Text Available OBJETIVO: caracterizar o desempenho de escolares nos testes de padrão tonal de frequência e padrão tonal de duração no silêncio e na presença de ruído ambiental. METODO: trata-se de estudo experimental transversal, com amostra de conveniência, composta por 70 estudantes, que responderam a um formulário de percepção do ruído ambiental. O nível de ruído da escola foi avaliado com medidor de nível de pressão sonora. Os estudantes foram submetidos à avaliações (fala, motricidade orofacial, linguagem e simplificada do processamento auditivo e distribuídos em dois grupos (G1 sem alteração fonoaudiológica e G2 com alteração fonoaudiológica. Foram realizados também os testes de padrão tonal de frequência e duração (silêncio e ruído. RESULTADOS: o nível médio de pressão sonora da escola variou de 57,2 dB(A na sala de informática a 83,6 dB(A na quadra de esportes. Segundo os estudantes, o que mais interfere em suas atividades é o barulho de conversas durante a aula. Quanto aos testes de padrão tonal de frequência (TPF e duração (TPD, observou-se que a média de acertos no ambiente silencioso foi maior que no ambiente ruidoso. O G1 apresentou melhor desempenho no TPD e TPF que G2. No ruído houve piora no desempenho dos dois grupos (G1 e G2 nos testes. CONCLUSÃO: os níveis de pressão sonora da escola encontram-se elevados e fora do padrão recomendado pelas normas nacionais. No ruído, houve piora no desempenho dos testes nos dois grupos estudados.PURPOSE: to characterize student performance in Frequency Pattern Test (FPT and Duration Pattern Test (DPT in a silent ambient and under noise. METHOD: experimental cross-sectional study, measured in a convenience sample. Survey made up by 70 students who answered a form on their noise perception. School's noise level was evaluated using physical measurements. Students were submitted to previous evaluations (speech, language, and auditory processing and then splinted

  13. CNOSSOS-EU: Development of a common environmental noise assessment method in the European Union; CNOSSOS-EU: desarrollo de un metodo comun de evaluacion del ruido ambiental en la Union Europea

    Energy Technology Data Exchange (ETDEWEB)

    Aspuru Soloaga, I.; Segues Echazarreta Segues, F.

    2011-07-01

    This article presents the main aspects of the work undertaken in the development of the common european method of environmental noise assessment CNOSSOS-EU. It summarizes the design, structure and content, and the methodological basis on which it is based. Taking into account the experience gained in the first round of strategic noise mapping, some conclusions are settled about its applications for the third round, and tits implications for the Spanish case. (Author) 9 refs.

  14. DIAGNOSTIC EVALUATION OF NUMBERICAL AIR QUALITY MODELS WITH SPECIALIZED AMBIENT OBSERVATIONS: TESTING THE COMMUNITY MULTISCALE AIR QUALITY MODELING SYSTEM (CMAQ) AT SELECTED SOS 95 GROUND SITES

    Science.gov (United States)

    Three probes for diagnosing photochemical dynamics are presented and applied to specialized ambient surface-level observations and to a numerical photochemical model to better understand rates of production and other process information in the atmosphere and in the model. Howeve...

  15. Community intervention in higher education of environmental health Intervencion comunitaria en la educación superior de salud ambiental Intervenção comunitária no ensino superior de saúde ambiental

    OpenAIRE

    2012-01-01

    Currently, in the Bologna context, university teaching methods focus on the student and on a learning experience based on practical methods. Under the guidance of teachers, students in the second year of the first Environmental Health Course at the Polytechnic Institute of Beja have designed and developed the following nine community intervention projects relating to environmental health: dangerous products (mercury); habitability and geriatrics; health education and the environment; drinking...

  16. Identification and Reduction of Turbomachinery Noise Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Communities near airports are often exposed to high noise levels due to low flying aircraft in the takeoff and landing phases of flight. Propulsion source noise is...

  17. Prediction of jet noise shielding with forward flight effects

    Science.gov (United States)

    Mayoral, Salvador

    Aircraft noise continues to be a major concern among airport-neighboring communities. A strong component of aircraft noise is the jet noise that is generated from the turbulent mixing between the jet exhaust and ambient medium. The hybrid wing body aircraft suppresses jet noise by mounting the engines over-the-wing so that the airframe may shield ground observers from jet noise sources. Subscale jet noise shielding measurements of a scaled-down turbofan nozzle and a model of the hybrid wing body planform are taken with two 12-microphone polar arrays. Chevrons and wedge-type fan flow deflectors are integrated into the baseline bypass ratio 10 (BPR10) nozzle to modify the mean flow and alter the noise source behavior. Acoustic results indicate that the baseline BPR10 nozzle produces a long noise source region that the airframe has difficulty shielding, even when the nozzle is translated two fan diameters upstream of its nominal position. The integration of either chevrons or fan flow deflectors into the nozzle is essential for jet noise shielding because they translate peak intensities upstream, closer to the fan exit plane. The numerical counterpart of this study transforms the system of equations governing the acoustic diffraction with forward flight into the wave equation. Two forward flight formulations are considered: uniform flow over slender body; and non-uniform potential flow at low Mach number. The wave equation is solved numerically in the frequency domain using the boundary element method. The equivalent jet noise source is modeled using the combination of a wavepacket and a monopole. The wavepacket is parameterized using the experimental far-field acoustic autospectra of the BPR10 jets and knowledge of their peak noise locations. It is shown that the noise source compacts with increasing Mach number and consequently there is an increase in shielding. An assessment of the error associated with the non-uniform formulation for forward flight shows that the

  18. Compreendendo o ambiente em Psicologia Ambiental

    Directory of Open Access Journals (Sweden)

    Lenelis Kruse

    2005-01-01

    Full Text Available O presente artigo consiste nas respostas às seguintes perguntas, propostas e respondidas pela autora: De que modo você, como uma psicóloga ambiental ou pesquisadora ambiente-comportamento: define o ambiente; leva em conta o ambiente em sua pesquisa; que tipo de teorias necessitamos para responder pelas relações pessoas-ambiente mais efetivamente; a interação entre as pessoas e o ambiente foi suficiente e adequadamente explicada na Psicologia Ambiental; de que modo esta interação poderia ser explicada mais satisfatoriamente; deveríamos estar construindo diferentes tipos de informação ou de conhecimento para criar teorias explanatórias mais úteis; o que está faltando na pesquisa da Psicologia Ambiental: qual é o seu background disciplinar; quais metodologias de pesquisa comportamento-ambiente você usou e achou mais úteis e porque ao trabalhar com outras disciplinas.

  19. Extracting Coherent Information from Noise Based Correlation Processing

    Science.gov (United States)

    2015-09-30

    LONG-TERM GOALS The goal of this research is to establish methodologies to utilize ambient noise in the ocean and to determine what scenarios...None PUBLICATIONS [1] “ Monitoring deep-ocean temperatures using acoustic ambinet noise,”K. W. Woolfe, S. Lani, K.G. Sabra, W. A. Kuperman...Geophys. Res. Lett., 42,2878–2884, doi:10.1002/2015GL063438 (2015). [2] “Optimized extraction of coherent arrivals from ambient noise correlations in

  20. High level white noise generator

    Science.gov (United States)

    Borkowski, Casimer J.; Blalock, Theron V.

    1979-01-01

    A wide band, stable, random noise source with a high and well-defined output power spectral density is provided which may be used for accurate calibration of Johnson Noise Power Thermometers (JNPT) and other applications requiring a stable, wide band, well-defined noise power spectral density. The noise source is based on the fact that the open-circuit thermal noise voltage of a feedback resistor, connecting the output to the input of a special inverting amplifier, is available at the amplifier output from an equivalent low output impedance caused by the feedback mechanism. The noise power spectral density level at the noise source output is equivalent to the density of the open-circuit thermal noise or a 100 ohm resistor at a temperature of approximately 64,000 Kelvins. The noise source has an output power spectral density that is flat to within 0.1% (0.0043 db) in the frequency range of from 1 KHz to 100 KHz which brackets typical passbands of the signal-processing channels of JNPT's. Two embodiments, one of higher accuracy that is suitable for use as a standards instrument and another that is particularly adapted for ambient temperature operation, are illustrated in this application.

  1. ENVIRONMENTAL LAW APPLICABLE TO URBAN NOISE POLLUTION: A STUDY ON THE STANDARDS AND DISCIPLINERY DIRECTIVES = LEGISLAÇÃO AMBIENTAL APLICÁVEL À POLUIÇÃO SONORA URBANA: UM ESTUDO DAS NORMAS E DIRETRIZES DISCIPLINARES

    Directory of Open Access Journals (Sweden)

    Nivar Gobbi

    2008-01-01

    Full Text Available A factor contributing to increasing urban degradation is noise pollution, discussed on this study in relation to the applicable Federal Brazilian legislation with the aim of contributing to inform the actions of decision makers who seek to recover quality of life that has been compromised by noise and protect their cities from this problem. The result is a compilation of solutions for the principal causes of urban noise conflicts. = Diante da crescente degradação dos cenários urbanos vem se destacando a Poluição Sonora, discutida nesse estudo no contexto da Legislação Federal aplicável, visando contribuir com a atuação de gestores que buscam restabelecer a qualidade de vida comprometida pelo ruído e, sobretudo, objetivam prevenir suas cidades contra esse problema. Como resultado, foi reunido um amplo e abrangente conjunto de soluções legislativas contemplando as principais causas de conflitos sonoros urbanos.

  2. Predicting Noise From Wind Turbines

    Science.gov (United States)

    Grosveld, Ferdinand W.

    1990-01-01

    Computer program WINDY predicts broadband noise spectra of horizontal-axis wind-turbine generators. Enables adequate assessment of impact of broadband wind-turbine noise. Effects of turbulence, trailing-edge wakes, and bluntness taken into account. Program has practical application in design and siting of wind-turbine machines acceptable to community. Written in GW-Basic.

  3. Uso de ardósia na construção de celas de maternidade para suínos: II - ambiente térmico e avaliação dos ruídos Use of slate to built swine nursery cells: II - thermal environment and noise evaluation

    Directory of Open Access Journals (Sweden)

    Jaqueline de O. Castro

    2013-02-01

    Full Text Available Este trabalho teve o objetivo de avaliar o ambiente térmico e o ruído em celas de maternidade para suínos com divisórias de alvenaria ou com rochas de ardósia. Para as medidas das variáveis de conforto térmico e de ruídos, utilizaram-se de termômetros e decibelímetro. No interior das celas e para a análise estatística, foram usados doze matrizes e cento e trinta e nove leitões, distribuídos em delineamento em blocos casualizados, em esquema de parcelas subdivididas. Os resultados mostraram que, no período da manhã, em ambos os tratamentos, as condições de conforto térmico foram mais adequadas para as matrizes, enquanto no período da tarde, mais adequadas para os leitões; com relação ao ruído, este foi menor nas celas de alvenaria. De forma geral, o ambiente no interior das celas construídas em ardósia apresentou umidade relativa mais baixa, e ITGU e temperatura mais elevada que as celas construídas em alvenaria. O nível de ruídos permaneceu dentro dos limites considerados ideais para suínos em ambos os tratamentos.The aim of the present study was to evaluate the thermal environment and noise levels in swine farrowing cells built with masonry or slate. Thermometers and sound level meter equipment were used to measure the thermal comfort variables. Inside the cells and for the statistical analysis, twelve sows and one hundred thirty-nine piglets were used, distributed in a randomized blocks design in a split-plot arrangement. The results showed that in the morning, in both treatments, the thermal comfort conditions were more suitable for sows, while in the afternoon it was more suitable for piglets. The noise was lower in the masonry cells. Overall, the environment inside in the cells built with slate presented lower relative humidity and, higher BGHI and temperature than those built with masonry. The noise level remained within the thresholds considered as ideal for swine in both treatments.

  4. Psicologia do Ambiente

    OpenAIRE

    Antunes, Dalila; Bernardo, Fátima; Palma-Oliveira, José-Manuel

    2011-01-01

    Na aplicação da Psicologia à área do AMBIENTE importa em primeiro lugar definir o que se entende, neste contexto, por ambiente. O conceito é entendido como toda a envolvente que rodeia o ser humano. Referimo-nos pois ao espaço físico e aos estímulos que nele existem (som, ar, paisagem…), dirigindo-se a Psicologia do Ambiente ao estudo e intervenção sobre a forma como o ambiente influencia o indivíduo ou grupos, e sobre o modo como o comportamento dos indivíduos e grupos influenciam o ambiente...

  5. Atmosphere and Ambient Space

    DEFF Research Database (Denmark)

    Schmidt, Ulrik

    Atmosphere and Ambient Space This paper explores the relation between atmosphere and ambient space. Atmosphere and ambient space share many salient properties. They are both ontologically indeterminate, constantly varying and formally diffuse and they are both experienced as a subtle, non......-signifying property of a given space. But from a certain point of view, the two concepts also designate quite dissimilar experiences of space. To be ’ambient’ means to surround. Accordingly, ambient space is that space, which surrounds something or somebody. (Gibson 1987: 65) Since space is essentially...... of a surrounding character, all space can thus be described as having a fundamentally ambient character. So what precisely is an ambient space, then? As I will argue in my presentation, ambient space is a sensory effect of spatiality when a space is experienced as being particularly surrounding: a ‘space effect...

  6. Atmosphere and Ambient Space

    DEFF Research Database (Denmark)

    Schmidt, Ulrik

    Atmosphere and Ambient Space This paper explores the relation between atmosphere and ambient space. Atmosphere and ambient space share many salient properties. They are both ontologically indeterminate, constantly varying and formally diffuse and they are both experienced as a subtle, non......-signifying property of a given space. But from a certain point of view, the two concepts also designate quite dissimilar experiences of space. To be ’ambient’ means to surround. Accordingly, ambient space is that space, which surrounds something or somebody. (Gibson 1987: 65) Since space is essentially...... of a surrounding character, all space can thus be described as having a fundamentally ambient character. So what precisely is an ambient space, then? As I will argue in my presentation, ambient space is a sensory effect of spatiality when a space is experienced as being particularly surrounding: a ‘space effect...

  7. Impact assessment of biomass-based district heating systems in densely populated communities. Part II: Would the replacement of fossil fuels improve ambient air quality and human health?

    Science.gov (United States)

    Petrov, Olga; Bi, Xiaotao; Lau, Anthony

    2017-07-01

    To determine if replacing fossil fuel combustion with biomass gasification would impact air quality, we evaluated the impact of a small-scale biomass gasification plant (BRDF) at a university campus over 5 scenarios. The overall incremental contribution of fine particles (PM2.5) is found to be at least one order of magnitude lower than the provincial air quality objectives. The maximum PM2.5 emission from the natural gas fueled power house (PH) could adversely add to the already high background concentration levels. Nitrogen dioxide (NO2) emissions from the BRDF with no engineered pollution controls for NOx in place exceeded the provincial objective in all seasons except during summer. The impact score, IS, was the highest for NO2 (677 Disability Adjusted Life Years, DALY) when biomass entirely replaced fossil fuels, and the highest for PM2.5 (64 DALY) and CO (3 DALY) if all energy was produced by natural gas at PH. Complete replacement of fossil fuels by one biomass plant can result in almost 28% higher health impacts (708 DALY) compared to 513 DALY when both the current BRDF and the PH are operational mostly due to uncontrolled NO2 emissions. Observations from this study inform academic community, city planners, policy makers and technology developers on the impacts of community district heating systems and possible mitigation strategies: a) community energy demand could be met either by splitting emissions into more than one source at different locations and different fuel types or by a single source with the least-impact-based location selection criteria with biomass as a fuel; b) advanced high-efficiency pollution control devices are essential to lower emissions for emission sources located in a densely populated community; c) a spatial and temporal impact assessment should be performed in developing bioenergy-based district heating systems, in which the capital and operational costs should be balanced with not only the benefit to greenhouse gas emission

  8. Noise Pollution Evaluation of City Center of Zanjan by Geographic Information System (GIS

    Directory of Open Access Journals (Sweden)

    F Majidi

    2016-06-01

    Full Text Available Background and Objective: The aim of  noise control in a community is to improve its management in the community, because the traffic noise can affect neighboring residential areas. Well-planned noise management can eliminate this major and harmful component issue, which is one of the stresses of urban life on human health. However, before planning to decrease urban noise, it is necessary to determine the very noisy areas in a given city. Therefore, the objective of this study was to measure the main noise indices at the noisy areas of Zanjan City, Iran. Materials and Methods: This study was performed in the central area of Zanjan City, with heavy traffic. For this purpose, the equivalent sound level (Leq, the day-night sound level (Ldn, the day-evening-night sound level (Lden, the noise pollution level (NP and the traffic noise index (TNI were measured in 19 stations in the first half (winter and spring of 2012. The measurements were conducted in the main streets of this area as recommended by EPA guidelines and finally the results obtained were mapped using the ArcGIS (Ver. 10.2 software.  Results: the noise maps in GIS showed clearly the variations of Leq, Ldn, and Lden indices in the study field area. Moreover, it was found that the hourly variations of Leq, Ldn and Lden in stations are completely function of population movements and therefore traffic loads in the Zanjan city center. In addition, the extent of violation of traffic noise level from the ambient noise standard was estimated by Lden at 100% stations (greater than 55 dB. The TNI values at 67  and 100% stations  were more than 74 dB (A, but  in the evenings the TNI values at  100% of stations  were more than 74 dB (A. The NP values at 78% sampling stations were more than 80 dB  implying  traffic noise was annoying in the most stations and times. Conclusion: Using noise maps, NP and TNI indices can help intelligent traffic control planning, because the noise maps can be

  9. Method for measuring self-noise of vector hydrophones

    Science.gov (United States)

    Li, Zhi; Chen, Hongjuan

    2017-09-01

    The Vector Hydrophone (VH) is widely used to remotely detect underwater targets. Accurately measuring the self-noise of the VH provides an important basis for evaluating the performance of the detection system in which it is utilized, since the ability to acquire weak signals is determined by the VH self-noise level. To accurately measure the VH self-noise level in actual working conditions, the Dual-channel Transfer Function Method (DTFM) is proposed to reduce ambient background noise interference. In this paper, the underlying principles of DTFM in reducing ambient background noise is analyzed. The numerical simulations to determine the influence of ambient background noise, and the sensitivity difference of the two VHs on the measurement results are studied. The results of measuring the VH self-noise level in a small laboratory water tank by using DTMF indicate that ambient background noise interference can be reduced effectively by employing DTMF, more accurate self-noise level can be obtained as well. The DTMF provides an effective method for accurately measuring the self-noise level of VHs and also provides technical support for the practical application of the VH in underwater acoustics.

  10. Sex-specific difference of the association between ambient air pollution and the prevalence of obesity in Chinese adults from a high pollution range area: 33 Communities Chinese Health Study

    Science.gov (United States)

    Li, Meng; Qian, Zhengmin; Vaughn, Michael; Boutwell, Brian; Ward, Patrick; Lu, Tao; Lin, Shao; Zhao, Yang; Zeng, Xiao-Wen; Liu, Ru-Qing; Qin, Xiao-Di; Zhu, Yu; Chen, Wen; Dong, Guang-Hui

    2015-09-01

    Experimental data suggests that exposure to airborne fine particulate matter is associated with obesity. There is little supporting epidemiologic evidence of this, however. To evaluate the effects of ambient air pollution on the prevalence of obesity among adults living in a primarily industrial province of northeast China, 24,845 Chinese adults between the ages of 18 and 74 were randomly recruited from 33 communities in 11 districts of three northeastern Chinese cities during 2009. The participants' weight and height were measured. Three-year (2006-2008) average concentrations of particles with an aerodynamic diameter ≤10 μm (PM10), sulfur dioxide (SO2), nitrogen dioxide (NO2), and ozone (O3) were calculated from monitoring stations in each of the 11 districts. Two-level logistic regressions models were used to examine the effects of pollutants exposure. Overall, 35.3% (8764) were overweight and 5.8% (1435) were obese. After adjusting for confounding factors, significant associations between concentrations of air pollutants and prevalence of obesity were found. When the analysis was stratified by sex, the associations were significant only in women. Among women, an increased prevalence of obesity was associated with an interquartile range increase in PM10 (19 μg/m3; odds ratio [ORs] = 1.18; 95% confidence interval [CI]:1.06-1.32), NO2 (9 μg/m3; ORs = 1.24; 95% CI: 1.09-1.41), and O3 (22 μg/m3; ORs = 1.14; 95% CI: 1.01-1.30). Associations were stronger among older participants. In conclusion, this study reveals a positive association between the long-term exposure to ambient air pollution and increased prevalence of obesity, and that these associations were more apparent in women than in men.

  11. The future is 'ambient'

    Science.gov (United States)

    Lugmayr, Artur

    2006-02-01

    The research field of ambient media starts to spread rapidly and first applications for consumer homes are on the way. Ambient media is the logical continuation of research around media. Media has been evolving from old media (e.g. print media), to integrated presentation in one form (multimedia - or new media), to generating a synthetic world (virtual reality), to the natural environment is the user-interface (ambient media), and will be evolving towards real/synthetic undistinguishable media (bio-media or bio-multimedia). After the IT bubble was bursting, multimedia was lacking a vision of potential future scenarios and applications. Within this research paper the potentials, applications, and market available solutions of mobile ambient multimedia are studied. The different features of ambient mobile multimedia are manifold and include wearable computers, adaptive software, context awareness, ubiquitous computers, middleware, and wireless networks. The paper especially focuses on algorithms and methods that can be utilized to realize modern mobile ambient systems.

  12. Nível de ruído no ambiente de trabalho do professor de educação física em aulas de ciclismo indoor Nivel de ruido en el ambiente de trabajo del profesor de educación física en aulas de ciclismo indoor Level of noise at the workplace environment among physical education teachers in indoor bike classes

    Directory of Open Access Journals (Sweden)

    Alexandre Palma

    2009-04-01

    Full Text Available OBJETIVO: Analisar o nível de ruído no ambiente de trabalho do professor de educação física durante as aulas de ciclismo indoor e sua associação com alguns aspectos da saúde. MÉTODOS: Estudo transversal conduzido com 15 professores de educação física de diferentes academias de ginástica, na cidade do Rio de Janeiro (RJ, em 2007. As características do processo e da organização do trabalho e as queixas de saúde relatadas pelos professores foram coletadas por meio de questionário padronizado. Para verificação dos transtornos psiquiátricos menores foi usado o SRQ-20 (Self-Report Questionnaire. As medidas de pressão sonora foram realizadas em um aparelho portátil. O nível de pressão foi medido em dB(A no nível equivalente de energia em diferentes pontos da sala e momentos da aula. As análises estatísticas utilizadas foram a ANOVA, o qui-quadrado e a correlação de Pearson. RESULTADOS: Os níveis de pressão sonora variaram entre 74,4 dB(A e 101,6 dB(A. Os valores médios encontrados durante as aulas foram: a aquecimento (média= 88,45 dB(A; b parte principal (média= 95,86 dB(A; e, fechamento (média= 85,12 dB(A. O ruído de fundo apresentou o valor médio de 66,89 dB(A. Houve diferenças significativas (pOBJETIVO: Analizar el nivel de ruido en el ambiente de trabajo del profesor de educación física durante las aulas de ciclismo indoor y su asociación con algunos aspectos de la salud. MÉTODOS: Estudio transversal conducido con 15 profesores de educación física de diferentes academias de ejercicio, en la ciudad de Río de Janeiro (Sureste de Brasil, en 2007. Las características del proceso y de la organización de trabajo y los reclamos de salud relatados por los profesores fueron colectados por medio de cuestionario estandarizado. Para verificar los trastornos psiquiátricos menores fue usado el SRQ-20 (Self Report Questionnaire. Las medidas de presión sonora fueron realizadas en un aparato portátil. El nivel de

  13. DERECHO AMBIENTAL EN ARGENTINA

    OpenAIRE

    2014-01-01

    El objetivo de la presente publicación es brindar un panorama general, introductorio y actualizado del derecho ambiental argentino. Entendiendo que el derecho ambiental es un signo de nuestra era y que por la dinamicidad de la cuestión ambiental requiere de permanente actualización regularoria. La autora desarrolla en forma objetiva su postura en relación con la necesidad de hacer sostenible al derecho ambiental. Para luego analizar brevemente la situación actual del derecho vigente en Argent...

  14. La reestructuración de los recursos sanitarios dedicados a la salud ambiental en la Comunidad de Madrid (1989-1999 The restructuring of the health resources devoted to the environmental health in the Community of Madrid

    Directory of Open Access Journals (Sweden)

    M. I. Villoria Mendieta

    2001-06-01

    Full Text Available La Salud Ambiental, en su acepción más amplia, que engloba lo que administrativamente se entiende por Sanidad Ambiental e Higiene Alimentaria, tradicionalmente estuvo desempeñada por los Titulares Farmacéuticos, Médicos y Veterinarios que ejercían sus funciones en el ámbito de las demarcaciones de Partidos. Sobre estas estructuras, creadas en el año 1953 han ido incidiendo a lo largo de los años distintos eventos de tipo técnico y político que han hecho necesaria su reestructuración para ser capaces de dar respuesta al conjunto de problemas que preocupan a la Salud Pública.En este trabajo se pretende describir el modelo de reestructuración de los Servicios Farmacéuticos y Veterinarios realizado en la Comunidad de Madrid, analizar este modelo de reestructuración y proponer un modelo de estos Servicios que pueda servir de paradigma a las Comunidades Autónomas que todavía no han abordado el proceso.La metodología usada es la del análisis de la situación antes y después de la reestructuración de los Servicios Veterinarios y Farmacéuticos realizada a través de sendos Decretos de la Comunidad de Madrid.Las estructuras de Partidos han quedado obsoletas por lo que la reestructuración de los recursos es una necesidad. El abordaje de esta reestructuración debe hacerse lejos de cualquier tentación corporativista y contemplando la posibilidad de incorporar otros profesionales distintos a los tradicionales dada la complejidad creciente de los problemas de Salud Ambiental.The Environmental Health, in its broadest sense, wich includes what is administratively meant Environmental Health and Food Hygiene, was traditionally performed by the Titular Chemists, Dictors and Veterinary Surgeons who perforrmed their duties within the limits of the Partidos (Areas or districts within the jurisdiction of a Court. Upon this structures, created in 1953, different technical and political events have been influencing for years, making their

  15. Noise cancellation in magnetoencephalography and electroencephalography with isolated reference sensors

    Science.gov (United States)

    Kraus, Jr., Robert H.; Espy, Michelle A.; Matlachov, Andrei; Volegov, Petr

    2010-06-01

    An apparatus measures electromagnetic signals from a weak signal source. A plurality of primary sensors is placed in functional proximity to the weak signal source with an electromagnetic field isolation surface arranged adjacent the primary sensors and between the weak signal source and sources of ambient noise. A plurality of reference sensors is placed adjacent the electromagnetic field isolation surface and arranged between the electromagnetic isolation surface and sources of ambient noise.

  16. Diameter dependence of 1/f noise in carbon nanotube field effect transistors using noise spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kawahara, Toshio, E-mail: toshi@isc.chubu.ac.jp [Center of Applied Superconductivity and Sustainable Energy Research, Chubu University, 1200, Matsumoto-cho, Kasugai-shi, Aichi 487-8501 (Japan); Yamaguchi, Satarou [Center of Applied Superconductivity and Sustainable Energy Research, Chubu University, 1200, Matsumoto-cho, Kasugai-shi, Aichi 487-8501 (Japan); Ohno, Yasuhide; Maehashi, Kenzo; Matsumoto, Kazuhiko [The Institute of Scientific and Industrial Research, Osaka University, 8-1, Mihogaoka, Ibaraki, Osaka 567-0047 (Japan); Mizutani, Shin [NTT Communication Science Laboratories, 2-4, Hikaridai Seika-cho, Soraku-gun, Kyoto 619-0237 (Japan); Itaka, Kenji [North Japan Research Institute for Sustainable Energy, Hirosaki University, 2-1-3 Matsubara, Aomori 030-0813 (Japan)

    2013-02-15

    Carbon nanotubes (CNTs) have many interesting properties for nano devices such as high sensitive sensors or noise enhanced nonlinear devices. A field effect transistor (FET) structure is one of the key features for these applications, and the control of noise in FETs is important for the actual operation of the application. Several origins of noise have been proposed, and defects and/or surface adsorption of molecules seem to be dominant for the 1/f type noise in CNTs. To study the origins of noise, the diameter dependence of noise properties was studied. We analyzed the noise properties in CNTs using noise spectroscopy with different fabrication parameters or ambient environments. We observed the crossover of noise properties in CNTs, which involved transition between different origins of noise depending on their diameter. Additionally, noise spectroscopy was used to observe such crossover between air and vacuum environments. We can control noise intensity using the gate voltage, and noise properties can be controlled by the fabrication parameters. These phenomena are useful for the stochastic operation of CNT-FETs.

  17. Radiactividad y medio ambiente

    OpenAIRE

    Sánchez León, José Guillermo

    1993-01-01

    En los medios de comunicación frecuentemente aparecen noticias que hacen referencia a la radiactividad y al medio ambiente y, sin embargo, lo que es la radiactividad y como influye ésta sobre el medio ambiente suele ser poco conocido, incluso por personas de formación científica.

  18. Occupational noise exposure and the risk of hypertension

    DEFF Research Database (Denmark)

    Stokholm, Zara A; Bonde, Jens Peter; Christensen, Kent L;

    2013-01-01

    Noise may increase the risk of hypertension, but findings are inconsistent with respect to both community and occupational noise exposure. We used a large sample of noise-exposed industrial trades to analyze the association of occupational noise exposure and the risk of hypertension....

  19. WHO environmental noise guidelines for the European Region

    NARCIS (Netherlands)

    Heroux, M.E.; Babisch, W.; Belojevic, G.; Brink, M.; Janssen, S.A.; Lercher, P.; Paviotti, M.; Pershagen, G.; Persson Waye, K.; Preis, A.; Stansfeld, S.; Berg, M. van den; Verbeek, J.

    2014-01-01

    WHO published the Guidelines for Community Noise in 1999 and the Night Noise Guidelines for Europe in 2009. Significant new research in the area of environmental noise and health has taken place since then. As well, new noise sources of concern for public health, such as personal electronic devices

  20. DERECHO AMBIENTAL EN ARGENTINA

    Directory of Open Access Journals (Sweden)

    Silvia Nonna

    2014-05-01

    Full Text Available El objetivo de la presente publicación es brindar un panorama general, introductorio y actualizado del derecho ambiental argentino. Entendiendo que el derecho ambiental es un signo de nuestra era y que por la dinamicidad de la cuestión ambiental requiere de permanente actualización regulatoria. La autora desarrolla en forma objetiva su postura en relación con la necesidad de hacer sostenible al derecho ambiental. Para luego analizar brevemente la situación actual del derecho vigente en Argentina, haciendo un rápido y resumido recorrido desde la última reforma de la Constitución Nacional hasta la consideración especial de cada una de las nuevas normas de presupuestos mínimos de protección ambiental.

  1. Noise-free magnetoencephalography recordings of brain function

    Science.gov (United States)

    Volegov, P.; Matlachov, A.; Mosher, J.; Espy, M. A.; Kraus, R. H., Jr.

    2004-05-01

    Perhaps the greatest impediment to acquiring high-quality magnetoencephalography (MEG) recordings is the ubiquitous ambient magnetic field noise. We have designed and built a whole-head MEG system using a helmet-like superconducting imaging surface (SIS) surrounding the array of superconducting quantum interference device (SQUID) magnetometers used to measure the MEG signal. We previously demonstrated that the SIS passively shields the SQUID array from ambient magnetic field noise, independent of frequency, by 25-60 dB depending on sensor location. SQUID 'reference sensors' located on the outside of the SIS helmet measure ambient magnetic fields in very close proximity to the MEG magnetometers while being nearly perfectly shielded from all sources in the brain. The fact that the reference sensors measure no brain signal yet are located in close proximity to the MEG sensors enables very accurate estimation and subtraction of the ambient field noise contribution to the MEG sensors using an adaptive algorithm. We have demonstrated total ambient noise reduction factors in excess of 106 (>120 dB). The residual noise for most MEG SQUID channels is at or near the intrinsic SQUID noise floor, typically 2-3 f T Hz-1/2. We are recording MEG signals with greater signal-to-noise than equivalent EEG measurements.

  2. Noise-free magnetoencephalography recordings of brain function

    Energy Technology Data Exchange (ETDEWEB)

    Volegov, P; Matlachov, A; Mosher, J; Espy, M A; Kraus, R H Jr. [Los Alamos National Laboratory, Los Alamos, NM 87545 (United States)

    2004-05-21

    Perhaps the greatest impediment to acquiring high-quality magnetoencephalography (MEG) recordings is the ubiquitous ambient magnetic field noise. We have designed and built a whole-head MEG system using a helmet-like superconducting imaging surface (SIS) surrounding the array of superconducting quantum interference device (SQUID) magnetometers used to measure the MEG signal. We previously demonstrated that the SIS passively shields the SQUID array from ambient magnetic field noise, independent of frequency, by 25-60 dB depending on sensor location. SQUID 'reference sensors' located on the outside of the SIS helmet measure ambient magnetic fields in very close proximity to the MEG magnetometers while being nearly perfectly shielded from all sources in the brain. The fact that the reference sensors measure no brain signal yet are located in close proximity to the MEG sensors enables very accurate estimation and subtraction of the ambient field noise contribution to the MEG sensors using an adaptive algorithm. We have demonstrated total ambient noise reduction factors in excess of 10{sup 6} (>120 dB). The residual noise for most MEG SQUID channels is at or near the intrinsic SQUID noise floor, typically 2-3 f T Hz{sup -1/2}. We are recording MEG signals with greater signal-to-noise than equivalent EEG measurements.

  3. High-Fidelity Simulation of Turbofan Noise Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Broadband fan noise ? closely tied to turbulent flow on and around the fan blades ? represents a key challenge to the noise reduction community due to the...

  4. Obtaining and Estimating Low Noise Floors in Vibration Sensors

    DEFF Research Database (Denmark)

    Brincker, Rune; Larsen, Jesper Abildgaard

    2007-01-01

    For some applications like seismic applications and measuring ambient vibrations in structures, it is essential that the noise floors of the sensors and other system components are low and known to the user. Some of the most important noise sources are reviewed and it is discussed how the sensor...... can be designed in order to obtain a low noise floor. Techniques to estimate the noise floors for sensors are reviewed and are demonstrated on a commercial commonly used sensor for vibration testing. It is illustrated how the noise floor can be calculated using the coherence between simultaneous...

  5. Surface tension effects in breaking wave noise.

    Science.gov (United States)

    Deane, Grant B

    2012-08-01

    The role of surface active materials in the sea surface microlayer on the production of underwater noise by breaking waves is considered. Wave noise is assumed to be generated by bubbles formed within actively breaking whitecaps, driven into breathing mode oscillation at the moment of their formation by non-equilibrium, surface tension forces. Two significant effects associated with surface tension are identified-a reduction in low frequency noise (bubbles by fluid turbulence within the whitecap and a reduction in overall noise level due to a decrease in the excitation amplitude of bubbles associated with reduced surface tension. The impact of the latter effect on the accuracy of Weather Observations Through Ambient Noise estimates of wind speed is assessed and generally found to be less than ±1 m s(-1) for wind speeds less than 10 m s(-1) and typical values of surfactant film pressure within sea slicks.

  6. Underwater noise from a wave energy converter

    DEFF Research Database (Denmark)

    Tougaard, Jakob

    A recent addition to the anthropogenic sources of underwater noise is offshore wave energy converters. Underwater noise was recorded from the Wavestar wave energy converter located at Hastholm, Denmark (57°7.73´N, 8°37.23´E). The Wavestar is a full-scale test and demonstration converter...... in full operation and start and stop of the converter. Median broad band (10 Hz – 20 kHz) sound pressure level (Leq) was 123 dB re. 1 Pa, irrespective of status of the wave energy converter (stopped, running or starting/stopping). The most pronounced peak in the third-octave spectrum was in the 160 Hz...... significant noise above ambient could be detected above the 250 Hz band. The absolute increase in noise above ambient was very small. L50 third-octave levels in the four bands with the converter running were thus only 1-2 dB above ambient L50 levels. The noise recorded 25 m from the wave energy converter...

  7. Aviation Noise Impacts: State of the Science

    Science.gov (United States)

    Basner, Mathias; Clark, Charlotte; Hansell, Anna; Hileman, James I.; Janssen, Sabine; Shepherd, Kevin; Sparrow, Victor

    2017-01-01

    Noise is defined as “unwanted sound.” Aircraft noise is one, if not the most detrimental environmental effect of aviation. It can cause community annoyance, disrupt sleep, adversely affect academic performance of children, and could increase the risk for cardiovascular disease of people living in the vicinity of airports. In some airports, noise constrains air traffic growth. This consensus paper was prepared by the Impacts of Science Group of the Committee for Aviation Environmental Protection of the International Civil Aviation Organization and summarizes the state of the science of noise effects research in the areas of noise measurement and prediction, community annoyance, children’s learning, sleep disturbance, and health. It also briefly discusses civilian supersonic aircraft as a future source of aviation noise.

  8. Measurement with verification of stationary signals and noise in extremely quiet environments: measuring below the noise floor.

    Science.gov (United States)

    Ellingson, Roger M; Gallun, Frederick J; Bock, Guillaume

    2015-03-01

    It can be problematic to measure stationary acoustic sound pressure level in any environment when the target level approaches or lies below the minimum measureable sound pressure level of the measurement system itself. This minimum measureable level, referred to as the inherent measurement system noise floor, is generally established by noise emission characteristics of measurement system components such as microphones, preamplifiers, and other system circuitry. In this paper, methods are presented and shown accurate measuring stationary levels within 20 dB above and below this system noise floor. Methodology includes (1) measuring inherent measurement system noise, (2) subtractive energy based, inherent noise adjustment of levels affected by system noise floor, and (3) verifying accuracy of inherent noise adjustment technique. While generalizable to other purposes, the techniques presented here were specifically developed to quantify ambient noise levels in very quiet rooms used to evaluate free-field human hearing thresholds. Results obtained applying the methods to objectively measure and verify the ambient noise level in an extremely quiet room, using various measurement system noise floors and analysis bandwidths, are presented and discussed. The verified results demonstrate the adjustment method can accurately extend measurement range to 20 dB below the measurement system noise floor, and how measurement system frequency bandwidth can affect accuracy of reported noise levels.

  9. Low noise road surfaces

    OpenAIRE

    Bolčina, Matjaž

    2014-01-01

    Noise is everywhere. Noise is a sound that makes people stressful and irritate. It often couses sleep disorders and also health problems like different cardiovascular disorders, hearing loss…In most cases traffic noise is the most disturbing. There are different ways to prevent people from traffic noise like building noise barriers and insulation of facades. However noise barriers and insulation of facades do not prevent noise formation, but are lowering existing noise. Another disadvantage i...

  10. Ambient Dried Aerogels

    Science.gov (United States)

    Jones, Steven M.; Paik, Jong-Ah

    2013-01-01

    A method has been developed for creating aerogel using normal pressure and ambient temperatures. All spacecraft, satellites, and landers require the use of thermal insulation due to the extreme environments encountered in space and on extraterrestrial bodies. Ambient dried aerogels introduce the possibility of using aerogel as thermal insulation in a wide variety of instances where supercritically dried aerogels cannot be used. More specifically, thermoelectric devices can use ambient dried aerogel, where the advantages are in situ production using the cast-in ability of an aerogel. Previously, aerogels required supercritical conditions (high temperature and high pressure) to be dried. Ambient dried aerogels can be dried at room temperature and pressure. This allows many materials, such as plastics and certain metal alloys that cannot survive supercritical conditions, to be directly immersed in liquid aerogel precursor and then encapsulated in the final, dried aerogel. Additionally, the metalized Mylar films that could not survive the previous methods of making aerogels can survive the ambient drying technique, thus making multilayer insulation (MLI) materials possible. This results in lighter insulation material as well. Because this innovation does not require high-temperature or high-pressure drying, ambient dried aerogels are much less expensive to produce. The equipment needed to conduct supercritical drying costs many tens of thousands of dollars, and has associated running expenses for power, pressurized gasses, and maintenance. The ambient drying process also expands the size of the pieces of aerogel that can be made because a high-temperature, high-pressure system typically has internal dimensions of up to 30 cm in diameter and 60 cm in height. In the case of this innovation, the only limitation on the size of the aerogels produced would be in the ability of the solvent in the wet gel to escape from the gel network.

  11. Architectural models of ambient-PRISMA in channel ambient calculus

    OpenAIRE

    Ali, Nour; Tuosto, Emilio

    2011-01-01

    peer-reviewed Ambient-PRISMA is an architectural approach for specifying aspect-oriented software architecture and generating code of distributed and mobile systems. Ambient-PRISMA lacks a precise semantics due to the fact that it is based only on a metamodel. In this paper, Ambient-PRISMA is mapped into a formal language called Channel Ambient Calculus, a process algebra for specifying mobile applications that provides channels and ambients as first-class citizens. We...

  12. Participação comunitária em um programa de intervenção em área de proteção ambiental Community participation in an intervention program developed in a protected area

    Directory of Open Access Journals (Sweden)

    Andréia Faraoni Freitas Setti

    2010-12-01

    Full Text Available Este artigo discute os conceitos de participação e empowerment em Promoção da Saúde e Desenvolvimento Sustentável, considerando as agendas de implementação local, Municípios/Cidades Saudáveis e Agenda 21, e a importância dos processos de avaliação nesse contexto, por meio da análise de uma intervenção em área de mananciais - o Programa Bairro Ecológico (PBE, desenvolvido em 51 bairros do município de São Bernardo do Campo, Estado de São Paulo, Brasil. O estudo teve por objetivo avaliar os processos de participação e empowerment da comunidade, a partir das ações desencadeadas pelo PBE. Foram aplicados questionários e realizados grupos focais com moradores de bairros que sofreram a intervenção. Também foram realizadas entrevistas individuais com gestores do programa e do poder judiciário. Os resultados indicaram que a participação na implementação do PBE favoreceu o empowerment individual e grupal, presente nas duas comunidades estudadas. As comunidades tornaram-se mais organizadas. Há indícios de que os processos de tomada de decisões são centralizados. Apesar disso, as comunidades entendem que sua participação no programa lhes traz muitas coisas boas. Houve um processo participativo no desenvolvimento do programa, ainda que alguns relatos apontem para o caráter obrigatório da participação. Deve-se destacar o impacto do envolvimento e fortalecimento das lideranças na implementação e sustentabilidade do programa. No que diz respeito a esta última, verificou-se que a sensibilização ambiental tem sido fator determinante para a execução e manutenção das ações ao longo do tempo.This article discusses the concepts of participation and empowerment in Health Promotion and Sustainable Development, considering the local implementation agendas:/ Healthy Cities and Agenda 21, and taking into account the importance of evaluation in this context. This was achieved through the analysis of an intervention

  13. Anthropogenic noise changes arthropod abundances.

    Science.gov (United States)

    Bunkley, Jessie P; McClure, Christopher J W; Kawahara, Akito Y; Francis, Clinton D; Barber, Jesse R

    2017-05-01

    Anthropogenic noise is a widespread and growing form of sensory pollution associated with the expansion of human infrastructure. One specific source of constant and intense noise is that produced by compressors used for the extraction and transportation of natural gas. Terrestrial arthropods play a central role in many ecosystems, and given that numerous species rely upon airborne sounds and substrate-borne vibrations in their life histories, we predicted that increased background sound levels or the presence of compressor noise would influence their distributions. In the second largest natural gas field in the United States (San Juan Basin, New Mexico, USA), we assessed differences in the abundances of terrestrial arthropod families and community structure as a function of compressor noise and background sound level. Using pitfall traps, we simultaneously sampled five sites adjacent to well pads that possessed operating compressors, and five alternate, quieter well pad sites that lacked compressors, but were otherwise similar. We found a negative association between sites with compressor noise or higher levels of background sound and the abundance of five arthropod families and one genus, a positive relationship between loud sites and the abundance of one family, and no relationship between noise level or compressor presence and abundance for six families and two genera. Despite these changes, we found no evidence of community turnover as a function of background sound level or site type (compressor and noncompressor). Our results indicate that anthropogenic noise differentially affects the abundances of some arthropod families. These preliminary findings point to a need to determine the direct and indirect mechanisms driving these observed responses. Given the diverse and important ecological functions provided by arthropods, changes in abundances could have ecological implications. Therefore, we recommend the consideration of arthropods in the environmental

  14. Recent and long-term occupational noise exposure and salivary cortisol level

    DEFF Research Database (Denmark)

    Stokholm, Zara Ann; Hansen, Åse Marie; Grynderup, Matias Brødsgaard

    2014-01-01

    -term occupational noise exposure and cortisol level measured off work to assess a possible sustained HPA-axis effect. We included 501 industrial, finance, and service workers who were followed for 24h during work, leisure, and sleep. Ambient occupational noise exposure levels were recorded every 5s by personal...... and estimated the noise level at the ear. Salivary cortisol concentration was measured at 20.00h, the following day at awakening, and 30min after awakening on average 5, 14 and 14.5h after finishing work. The mean ambient noise exposure level was 79.9dB(A) [range: 55.0-98.9] and the mean estimated level...... observed no statistically significant exposure response relation between recent, or long-term ambient occupational noise exposure level and any cortisol parameter off work. This was neither the case for recent noise level at the ear. To conclude, neither recent nor long-term occupational noise exposure...

  15. Bayesian Ambient Noise Inversion for Geoacoustic Uncertainty Estimation

    Science.gov (United States)

    2013-09-30

    methods such as the iterative Papoulis -Gerchberg algorithm16 or its non-iterative versions17 can be used for extrapolation. Figure 2(a) shows an example...difference between the extrapolated and the true coherence is due to the slow convergence of the Papoulis - Gerchberg algorithm,16 which in Figure 2(b) was...extrapolation do not agree with the results from a true 12-m aperture. The extrapolation technique using the Papoulis - Gerchberg algorithm is also

  16. Ambient Noise Statistics for Sonar Modelling - Final Report

    Science.gov (United States)

    2005-05-01

    this collection of information, including suggestions for reducing this burden, to Washington Headquarters Services , Directorate for Information...des données de sonar. Résultats Le contrat en cause a donné lieu à la réalisation d’un outil qui permettrait de réutiliser l’ensemble de données

  17. Ocean Ambient Noise Studies for Shallow and Deep Water Environments

    Science.gov (United States)

    2013-09-30

    Num. of elements Spacing (m) Sampling freq. (Hz) Design freq. (Hz) MFA -03 32 0.18 12000 4166 MFA -04 32 0.18 12000 4166 VLA-04 32 0.50 6000 1500...bottom-loss estimate. The bottom-loss profiles shown in Figure 4 refer to 5-minute averages from the MFA -03, MFA -04 and VLA-04 data, respectively...Figure 4: Bottom loss profiles computed from two 5-minute averages: MFA -03 data at 2766Hz (a) and

  18. Sediment Acoustics: Wideband Model, Reflection Loss and Ambient Noise Inversion

    Science.gov (United States)

    2011-09-01

    grain contact in water- saturated sand," J. Acoust. Soc. Am., vol. 124, pp. EL296-301, (2008). N. P. Chotiros, and M. J. Isakson. "Shear and...34Frame bulk modulus of porous granular marine sediments," J. Acoust. Soc. Am. 120, 699-710, (2006). B. J. Kraft and C. P. de Moustier, "Detailed

  19. Dynamic Ambient Noise Model (DANM) Evaluation Using Port Everglades Data

    Science.gov (United States)

    2006-05-31

    PROGRAM ELEMENT NUMBER 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 2. REPORT TYPE1. REPORT DATE (DD-MM-YYYY) 4. TITLE AND SUBTITLE 6...Thompson ASTRAL model (Version 5.0) or the Parabolic Equation (PE Version 5.1) model for calculating the TL grid. PE 5.1 is configured to use the Range...the hour (less than 0.76 dB for all frequencies; see Table 7). The PE model is expected to be more accurate (but slower) than ASTRAL for highly

  20. Large Aperture Array Measurements of the Vertical Ambient Noise Field

    Science.gov (United States)

    1989-07-01

    Ingard , 1968]. The array system is composed of 4 component parts: uplink wire, array, keviar strength member and weights. The system mechanical parameters...34, Scripps Institution of Oceanog- raphy, La Jolla, CA, Nov. 1975. Morse, P, M. and K. U. Ingard , Theoretical Acoustics, New York: McGraw-Hill Inc, p

  1. Sequential Geoacoustic Filtering and Utilizing Ambient Noise for Geoacoustic Inversion

    Science.gov (United States)

    2013-09-30

    spectral density matrices. A random matrix is a matrix- valued random variable, i.e., the elements are stochastic variables. RMT can be used to study...Using Random Matrix Theory ( RMT ) to model the statistical properties of the SCM, the eigenvalue distributions are more informative than using the...information content in the data. The excellent matching of SCM eigenvalues using RMT is demonstrated using data from a towed horizontal array during the

  2. Ocean Ambient Noise Studies for Improved Sonar Processing

    Science.gov (United States)

    2012-09-30

    various eigenray propagation-time differences, 0̅(), −̅(), and +̅(), were readily computed using a 3-D raytracer parameterized with a...extracted from these features using a raytracer to estimate path length differences between direct and multipath eigenrays. Use of a bathymetry

  3. El ambiente social

    Directory of Open Access Journals (Sweden)

    Henry Granada

    2001-01-01

    Full Text Available Con el título de« Ambiente Social» se quiere enfatizar que el concepto de Ambiente no se agota en lo ecológico (físico-biótico. Así mismo, dentro lo psicosocial, la noción de territorio adquiere importancia y otorga significación a la «experiencia ambiental», ya que abre ventanas hacia la comprensión de actividades como el ordenamiento territorial y a la mediación de las dimensiones psicológica, social y cultural del espacio. Finalmente, aunque el ordenamiento del territorio suele enfocarse desde los componentes sociopolíticos y económicos con el ánimo de planificación, el componente psicosocial traduce aspectos del ordenamiento dentro de la vida cotidiana y relaciona nociones como identidad y arraigo, entre otras.

  4. Ambient oxygen promotes tumorigenesis.

    Directory of Open Access Journals (Sweden)

    Ho Joong Sung

    Full Text Available Oxygen serves as an essential factor for oxidative stress, and it has been shown to be a mutagen in bacteria. While it is well established that ambient oxygen can also cause genomic instability in cultured mammalian cells, its effect on de novo tumorigenesis at the organismal level is unclear. Herein, by decreasing ambient oxygen exposure, we report a ∼50% increase in the median tumor-free survival time of p53-/- mice. In the thymus, reducing oxygen exposure decreased the levels of oxidative DNA damage and RAG recombinase, both of which are known to promote lymphomagenesis in p53-/- mice. Oxygen is further shown to be associated with genomic instability in two additional cancer models involving the APC tumor suppressor gene and chemical carcinogenesis. Together, these observations represent the first report directly testing the effect of ambient oxygen on de novo tumorigenesis and provide important physiologic evidence demonstrating its critical role in increasing genomic instability in vivo.

  5. A rapid prototyping system for broadband multichannel active noise and vibration control

    NARCIS (Netherlands)

    Wesselink, J.M.

    2009-01-01

    In recent years the need for active and passive noise reduction methods has increased. This is due to an increase in the ambient noise caused by industrialization and the extended use of power tools. The effects of noise on a person can be quite severe and can cause illness and in severe cased lead

  6. Crisis ambiental y cristianismo

    OpenAIRE

    Felipe Cárdenas

    2008-01-01

    En el artículo se identifican y reconocen algunas opciones que se pueden desarrollar en el cristianismo en relación con la problemática ambiental. Se aborda el dilema bíblico suscitado por interpretaciones antiecológicas y ecológicas. Con base en una lectura de la Biblia, de testimonios cristianos, y en una rememoria de estructuras institucionales, como la parroquia, se analiza el valor que tiene el mensaje cristiano en lo referido a la mitigación de la crisis ambiental.This article identifie...

  7. Prevención en salud ambiental para poblaciones expuestas a plaguicidas: entrevistas en comunidades rurales y taller educativo para agentes multiplicadores Prevention in environmental health for pesticide exposed populations: interviews in rural communities and workshop for multiplying agents

    Directory of Open Access Journals (Sweden)

    María Gabriela Rovedatti

    2006-07-01

    Full Text Available La zona frutihortícola del alto Valle de Río Negro, en Argentina, constituye una región de exposición residencial a plaguicidas en razón de la dinámica ambiental de estos compuestos y la situación geográfica de sus comunidades. Considerando que los comportamientos preventivos de la población dependen del nivel educativo, este trabajo se planificó con el objetivo de capacitar al personal de salud del hospital de Cinco Saltos, localidad situada en esta región, como agentes multiplicadores en el fortalecimiento de dichas conductas. Previo a la capacitación, se realizaron entrevistas domiciliarias en un asentamiento rural en el que, si bien el 92% de las mujeres estaba alfabetizada, el 81% desconocía el período anual de fumigaciones y sólo el 12% conocía las vías de incorporación. Se registraron conductas de riesgo para el uso doméstico de plaguicidas y para la exposición residencial. Aunque el 95% identificaba a los niños como el grupo social más vulnerable y el 58% estimaba que la exposición materna afecta al feto, solamente el 56 % tomaba precauciones durante el período de fumigación y el 92% utilizaba plaguicidas en el hogar. La encuesta diagnóstica aplicada al personal de salud reveló un importante grado de desconocimiento sobre la exposición indirecta. En base a la información recabada en ambas actividades se dictó un Taller sobre toxicología de plaguicidas cuya acreditación incluyó el diseño de un plan de trabajo para la transferencia hacia las comunidades de riesgo. También se llevaron a cabo acciones para la difusión de esta problemática en medios locales.In Argentina, the agricultural area of High Valley of Río Negro and Neuquén, is a region of pesticide residential exposition in view of the environmental dynamics of these compounds and the geographic situation of their communities. Considering that people prevention behavior depends on their educational level, this work was designed with the purpose

  8. Ambient mass spectrometry imaging

    DEFF Research Database (Denmark)

    Janfelt, Christian; Nørgaard, Asger W

    2012-01-01

    Easy ambient sonic spray ionization (EASI) and desorption electrospray ionization (DESI) were used for imaging of a number of samples, including sections of rat brain and imprints of plant material on porous Teflon. A novel approach termed Displaced Dual-mode Imaging was utilized for the direct...

  9. Meio ambiente e literatura

    Directory of Open Access Journals (Sweden)

    Marli de Oliveira Fantini Scarpelli

    2007-06-01

    Full Text Available Este artigo busca reconhecer alguns pontos de tangência entre os romances Vidas secas, de Graciliano Ramos, As cidades invisíveis, de Italo Calvino, e Grande sertão: veredas, de Guimarães Rosa, sobretudo no que respeita às relações modalizantes entre literatura e meio ambiente. Em meio à diversidade temática das obras indicadas, subjaz o tema da consciência ambiental, que, nas últimas décadas, vem recebendo a crescente adesão não apenas de ambientalistas, mas também de intelectuais, políticos, escritores. O foco na degradação ambiental, no alerta implícito acerca das precárias condições de vida futura em nosso planeta revela um dos nucleares e contundentes problemas a desafiar a agenda contemporânea. Nesse sentido, revela-se paradigmático o “lugar-sertão” rosiano, que, ao difundir seu território, seus valores e denúncias, patenteia uma concepção ambiental inovadora e reticular, em estreito diálogo com as atuais pesquisas interdisciplinares sobre o tema, as quais deveriam doravante guardar, em seu horizonte de expectativa, os paradigmas, as perspectivas e os equacionamentos que alicerçam as artes em geral e a literatura em particular.

  10. La radioactividad ambiental

    OpenAIRE

    Rafael Núñez-Lagos Roglá

    2011-01-01

    Se explican los conceptos fundamentales relacionados con la radiactividad y se utilizan para describir la radiactividad ambiental. Se explican también los isótopos de largo periodo y las principales familias radioactivas junto con la radiación cósmica y los radionucleidos cosmogénicos.

  11. La radioactividad ambiental

    Directory of Open Access Journals (Sweden)

    Rafael Núñez-Lagos Roglá

    2011-01-01

    Full Text Available Se explican los conceptos fundamentales relacionados con la radiactividad y se utilizan para describir la radiactividad ambiental. Se explican también los isótopos de largo periodo y las principales familias radioactivas junto con la radiación cósmica y los radionucleidos cosmogénicos.

  12. Ambient Radon-222 Monitoring in Amargosa Valley, Nevada

    Energy Technology Data Exchange (ETDEWEB)

    L.H. Karr; J.J. Tappen; D. Shafer; K.J. Gray

    2008-06-05

    As part of a program to characterize and baseline selected environmental parameters in the region around the proposed repository at Yucca Mountain, Nevada, ambient radon-222 monitoring was conducted in the rural community of Amargosa Valley, the community closest to the proposed repository site. Passive integrating radon monitors and a continuous radon monitoring instrument were deployed adjacent to the Community Environmental Monitoring Program (CEMP) (http://www.cemp.dri.edu/index.html) station located in the Amargosa Valley Community Center near the library. The CEMP station provided real-time ambient gamma exposure and meteorological data used to correct the integrated radon measurements as well as verify meteorological data collected by the continuous radon monitoring instrument. Additionally, different types of environmental enclosures that housed the monitors and instrument were used to determine if particular designs influenced the ambient radon measurements.

  13. Noise and vibration issues in contemporary facilities

    Science.gov (United States)

    Evans, Jack B.

    2005-09-01

    Contemporary medical facilities, whether for diagnosis, treatment or research, must accommodate the needs of humans and medical instruments or equipment. With regard to acoustics, the disparate requirements vary from acoustic privacy to freedom from intrusive noise, to vibration control. Medical facilities also grow and change, subjecting occupants to demolition and construction disturbances. Acoustical criteria employed in building designs are often inadequate to control the full spectral range of requirements, although criteria for many conditions do exist. This paper presents interesting problems and conditions that occur in healthcare and research facilities with brief case studies to illustrate them, including construction disturbances, tonal noise affects on patients, privacy, and vibration and low frequency noise affects on medical equipment. Measurement data will contrast ambient versus disturbed conditions. Solution concepts to example problems will be presented with photo or drawing illustrations. Discussion will include typical conflicts, constraints, limitations and compromises. Concluding remarks will suggest application of appropriate and comprehensive acoustical, noise and vibration criteria.

  14. Wind Turbine Noise and Natural Sounds: Masking, Propagation and Modeling

    Energy Technology Data Exchange (ETDEWEB)

    Bolin, Karl

    2009-05-15

    Wind turbines are an environmentally friendly and sustainable power source. Unfortunately, the noise impact can cause deteriorated living conditions for nearby residents. The audibility of wind turbine sound is influenced by ambient sound. This thesis deals with some aspects of noise from wind turbines. Ambient sounds influence the audibility of wind turbine noise. Models for assessing two commonly occurring natural ambient sounds namely vegetation sound and sound from breaking waves are presented in paper A and B. A sound propagation algorithm has been compared to long range measurements of sound propagation in paper C. Psycho-acoustic tests evaluating the threshold and partial loudness of wind turbine noise when mixed with natural ambient sounds have been performed. These are accounted for in paper D. The main scientific contributions are the following.Paper A: A semi-empiric prediction model for vegetation sound is proposed. This model uses up-to-date simulations of wind profiles and turbulent wind fields to estimate sound from vegetation. The fluctuations due to turbulence are satisfactory estimated by the model. Predictions of vegetation sound also show good agreement to measured spectra. Paper B: A set of measurements of air-borne sound from breaking waves are reported. From these measurements a prediction method of sound from breaking waves is proposed. Third octave spectra from breaking waves are shown to depend on breaker type. Satisfactory agreement between predictions and measurements has been achieved. Paper C: Long range sound propagation over a sea surface was investigated. Measurements of sound transmission were coordinated with local meteorological measurements. A sound propagation algorithm has been compared to the measured sound transmission. Satisfactory agreement between measurements and predictions were achieved when turbulence were taken into consideration in the computations. Paper D: The paper investigates the interaction between wind

  15. Environmental noise and human prenatal growth

    Energy Technology Data Exchange (ETDEWEB)

    Schell, L.M.

    1981-09-01

    To determine whether chronic exposure to relatively loud noise has demonstrable biological effects in humans, a study was conducted on the effect of mother's exposure to airport noise while pregnant, and of social and biological characteristics of the family upon birthweight and gestation length. The sample of births was drawn from a community located adjacent to an international airport in the U.S., where noise levels had been measured previously. Mother's noise exposure was based upon noise levels near her residence in the community while she was pregnant. Data from 115 births were used, these being from mothers whose noise exposure history was most complete throughout the pregnancy. Using multivariate analysis to correct for family characteristics, the partial correlation coefficient for noise exposure and gestation length was negative, large, and significant in girls (r . -0.49, p less than 0.001). In boys the partial correlation coefficient was also negative but was smaller and did not quite reach statistical significance. Partial correlations with birthweight were smaller in both boys and girls and not significant. These results agree best with previous studies that suggest that noise may reduce prenatal growth. The size of the observed effects may be related to a conservative research design biased towards underestimation, as well as to the real effects of noise upon human prenatal growth.

  16. Model based monitoring for industrial and traffic noise control

    NARCIS (Netherlands)

    Eerden, F.J.M. van der; Binnerts, B.; Graafland, F.

    2015-01-01

    Noise control starts by understanding the actual noise situation. Especially for situations where the distance between industrial and traffic noise sources and a local community is in the order of one kilometer or more, it may not be clear what sources are the main contributors to annoyance. Then a

  17. Guidelines for a Training Course in Noise Survey Techniques.

    Science.gov (United States)

    Shadley, John; And Others

    The course is designed to train noise survey technicians during a 3-5 day period to make reliable measurements of 75 percent of the noise problems encountered in the community. The more complex noise problems remaining will continue to be handled by experienced specialists. These technicians will be trained to assist State and local governments in…

  18. Inhibitory noise

    Directory of Open Access Journals (Sweden)

    Alain Destexhe

    2010-03-01

    Full Text Available Cortical neurons in vivo may operate in high-conductance states, in which the major part of the neuron's input conductance is due to synaptic activity, sometimes several-fold larger than the resting conductance. We examine here the contribution of inhibition in such high-conductance states. At the level of the absolute conductance values, several studies have shown that cortical neurons in vivo are characterized by strong inhibitory conductances. However, conductances are balanced and spiking activity is mostly determined by fluctuations, but not much is known about excitatory and inhibitory contributions to these fluctuations. Models and dynamic-clamp experiments show that, during high-conductance states, spikes are mainly determined by fluctuations of inhibition, or by inhibitory noise. This stands in contrast to low-conductance states, in which excitatory conductances determine spiking activity. To determine these contributions from experimental data, maximum likelihood methods can be designed and applied to intracellular recordings in vivo. Such methods indicate that action potentials are indeed mostly correlated with inhibitory fluctuations in awake animals. These results argue for a determinant role for inhibitory fluctuations in evoking spikes, and do not support feed-forward modes of processing, for which opposite patterns are predicted.

  19. CONSTRUCCIÓN DE UNA COMUNIDAD VIRTUAL DE APRENDIZAJE AMBIENTAL (CVAA: ESPACIO INTERACTIVO PARA AMBIENTALIZAR EL QUEHACER UNIVERSITARIO ESTATAL DE COSTA RICA (BUILDING A VIRTUAL COMMUNITY FOR ENVIRONMENTAL LEARNING (VCEL: AN INTERACTIVE SPACE TO ENHANCE ENVIRONMENTALISM INTO THE REGULAR OBLIGATIONS OF PUBLIC UNIVERSITIES IN COSTA RICA

    Directory of Open Access Journals (Sweden)

    Zúñiga Vega Claudia

    2011-06-01

    Full Text Available Resumen:Este artículo tiene como objetivo presentar el caso de la construcción y puesta en práctica de la Comunidad Virtual de Aprendizaje Ambiental (CVAA en Costa Rica, cuya página está disponible en la siguiente dirección www.comunidad.inie.ucr.ac.cr. Es un sitio Web que servirá para dar un mayor impulso a la incorporación del eje ambiental en la vida universitaria costarricense, así como para hacer un recuento de sus actividades hasta el 2011. La CVAA ha facilitado el intercambio académico para recuperar, analizar, discutir, compartir y gestar experiencias que faciliten la incorporación de la dimensión ambiental en el quehacer cotidiano de las universidades estatales. Se concluye que esta estrategia tecnológica favorece la participación de diferentes sectores universitarios, la transversalización de la dimensión ambiental y el desarrollo profesional en dicho ámbito.Abstract: The purpose of this article is to present a case study related to the building and practicality of a virtual community for environmental learning (VCEL, www.comunidad.inie.ucr.ac.cr in Costa Rica. This website will serve as the driving force to the integration of a curricula into the environmental education in the Costa Rican university life. The paper also shows the virtual community activities throughout the year 2011. The VCEL (CVAA, acronyms in Spanish has made the academic exchange possible in order to retrieve, analyze, compare and develop experiences that facilitate the integration of an environmental dimension into the everyday duties of public universities. The conclusions of this article determine that this technological strategy favors the involvement of all of the participants at the university level (faculty, students and administration, encourages the mainstreaming of the environmental dimension and promotes professional development in the environmental field.

  20. Seismic exploration noise reduction in the Marginal Ice Zone.

    Science.gov (United States)

    Tollefsen, Dag; Sagen, Hanne

    2014-07-01

    A sonobuoy field was deployed in the Marginal Ice Zone of the Fram Strait in June 2011 to study the spatial variability of ambient noise. High noise levels observed at 10-200 Hz are attributed to distant (1400 km range) seismic exploration. The noise levels decreased with range into the ice cover; the reduction is fitted by a spreading loss model with a frequency-dependent attenuation factor less than for under-ice interior Arctic propagation. Numerical modeling predicts transmission loss of the same order as the observed noise level reduction and indicates a significant loss contribution from under-ice interaction.

  1. Ambient Air Quality Data Inventory

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Office of Air and Radiation??s (OAR) Ambient Air Quality Data (Current) contains ambient air pollution data collected by EPA, other federal agencies, as well as...

  2. Ambient Air Quality Data Inventory

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Office of Air and Radiation's (OAR) Ambient Air Quality Data (Current) contains ambient air pollution data collected by EPA, other federal agencies, as well as...

  3. Occupational noise management

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-06-15

    Occupational noise is a frequently encountered on-the-job health hazard. This guide presented the responsibilities and regulatory requirements related to business activities where noise above 80 decibels is present. The guide provided a definition of noise and discussed noise hazards, types of noise, and on-the-job noise exposure. A risk assessment to noise in the work environment was also discussed. A guide to a hearing conservation program was also included. The main purpose of a hearing conservation program is the prevention of noise induced hearing loss for employees exposed to occupational noise. The components of such a program were outlined, with particular reference to noise monitoring; noise exposure control; worker education and training; hearing (audiometric) testing; and annual program review and record keeping. It was concluded that in terms of record keeping, it can be very helpful to file noise exposure assessments, particularly personal exposure measurements, with hearing test records to facilitate for future reference. refs., appendices.

  4. Noise and Hearing Protection

    Science.gov (United States)

    ... ENTCareers Marketplace Find an ENT Doctor Near You Noise and Hearing Protection Noise and Hearing Protection Patient ... it is. How can I tell if a noise is dangerous? People differ in their sensitivity to ...

  5. Medio ambiente urbano

    OpenAIRE

    2009-01-01

    El estudio  y análisis  de las interacciones  entre  ambiente  y desarrollo y  su inserción  en los procesos  de  planificación del crecimiento  social y económico  de  los  países  de América Latina, reviste especial interés para proponer alternativas de acción que  conduzcan  al  logro  de  una mejor  calidad de  vida.  El impacto  que las conferencias sobre  el  Medio Ambiente Humano Estocolmo (1972),  Cocoyoc  (1974) o de documentos como "Nuestro Futuro Común" o "Nuestra Propia Agenda" ha...

  6. NIF Ambient Vibration Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Noble, C.R.; Hoehler, M.S., S.C. Sommer

    1999-11-29

    LLNL has an ongoing research and development project that includes developing data acquisition systems with remote wireless communication for monitoring the vibrations of large civil engineering structures. In order to establish the capability of performing remote sensing over an extended period of time, the researchers needed to apply this technology to a real structure. The construction of the National Ignition Facility provided an opportunity to test the data acquisition system on a large structure to monitor whether the facility is remaining within the strict ambient vibration guidelines. This document will briefly discuss the NIF ambient vibration requirements and summarize the vibration measurements performed during the Spring and Summer of 1999. In addition, a brief description of the sensors and the data acquisition systems will be provided in Appendix B.

  7. NIF Ambient Vibration Measurements

    Energy Technology Data Exchange (ETDEWEB)

    Noble, C.R.; Hoehler, M.S., S.C. Sommer

    1999-11-29

    LLNL has an ongoing research and development project that includes developing data acquisition systems with remote wireless communication for monitoring the vibrations of large civil engineering structures. In order to establish the capability of performing remote sensing over an extended period of time, the researchers needed to apply this technology to a real structure. The construction of the National Ignition Facility provided an opportunity to test the data acquisition system on a large structure to monitor whether the facility is remaining within the strict ambient vibration guidelines. This document will briefly discuss the NIF ambient vibration requirements and summarize the vibration measurements performed during the Spring and Summer of 1999. In addition, a brief description of the sensors and the data acquisition systems will be provided in Appendix B.

  8. Ambient temperature recorder

    Science.gov (United States)

    Russell, Larry D.

    1991-01-01

    A temperature data recorder, designated the Ambient Temperature Recorder (ATR-4), was developed at NASA Ames Research Center to meet particular requirements for space life sciences experiments. The small, self-contained, four-channel, battery-powered device records 32 kilobytes of temperature data over a range of -40 to +60 C at four sampling intervals ranging from 1.875 to 15 minutes. Data is stored in its internal electronic memory for later readout by a personal computer.

  9. Indirect combustion noise of auxiliary power units

    Science.gov (United States)

    Tam, Christopher K. W.; Parrish, Sarah A.; Xu, Jun; Schuster, Bill

    2013-08-01

    Recent advances in noise suppression technology have significantly reduced jet and fan noise from commercial jet engines. This leads many investigators in the aeroacoustics community to suggest that core noise could well be the next aircraft noise barrier. Core noise consists of turbine noise and combustion noise. There is direct combustion noise generated by the combustion processes, and there is indirect combustion noise generated by the passage of combustion hot spots, or entropy waves, through constrictions in an engine. The present work focuses on indirect combustion noise. Indirect combustion noise has now been found in laboratory experiments. The primary objective of this work is to investigate whether indirect combustion noise is also generated in jet and other engines. In a jet engine, there are numerous noise sources. This makes the identification of indirect combustion noise a formidable task. Here, our effort concentrates exclusively on auxiliary power units (APUs). This choice is motivated by the fact that APUs are relatively simple engines with only a few noise sources. It is, therefore, expected that the chance of success is higher. Accordingly, a theoretical model study of the generation of indirect combustion noise in an Auxiliary Power Unit (APU) is carried out. The cross-sectional areas of an APU from the combustor to the turbine exit are scaled off to form an equivalent nozzle. A principal function of a turbine in an APU is to extract mechanical energy from the flow stream through the exertion of a resistive force. Therefore, the turbine is modeled by adding a negative body force to the momentum equation. This model is used to predict the ranges of frequencies over which there is a high probability for indirect combustion noise generation. Experimental spectra of internal pressure fluctuations and far-field noise of an RE220 APU are examined to identify anomalous peaks. These peaks are possible indirection combustion noise. In the case of the

  10. A Design Tool to Reason about Ambient Assisted Living Systems

    OpenAIRE

    Sun, Hong; De Florio, Vincenzo; Blondia, Chris

    2016-01-01

    This paper proposes a design tool to investigate the properties and emergent behaviours of a special class of Ambient Assisted Living systems, namely mutual assistance communities where the dwellers contribute to each other's well being. Purpose of our system is to understand how mutual assistance communities work, what consequences a design decision could ultimately bring about, and how to construct care communities providing timely and cost-effective service for elderly and disabled people....

  11. A Comprehensive Approach to Management of Workplace and Environmental Noise at NASA Lewis Research Center

    Science.gov (United States)

    Cooper, Beth A.

    1995-01-01

    NASA Lewis Research Center is home to more than 100 experimental research testing facilities and laboratories, including large wind tunnels and engine test cells, which in combination create a varied and complex noise environment. Much of the equipment was manufactured prior to the enactment of legislation limiting product noise emissions or occupational noise exposure. Routine facility maintenance and associated construction also contributes to a noise exposure management responsibility which is equal in magnitude and scope to that of several small industrial companies. The Noise Program, centrally managed within the Office of Environmental Programs at LRC, maintains overall responsibility for hearing conservation, community noise control, and acoustical and noise control engineering. Centralized management of the LRC Noise Program facilitates the timely development and implementation of engineered noise control solutions for problems identified via either the Hearing Conservation of Community Noise Program. The key element of the Lewis Research Center Noise Program, Acoustical and Noise Control Engineering Services, is focused on developing solutions that permanently reduce employee and community noise exposure and maximize research productivity by reducing or eliminating administrative and operational controls and by improving the safety and comfort of the work environment. The Hearing Conservation Program provides noise exposure assessment, medical monitoring, and training for civil servant and contractor employees. The Community Noise Program aims to maintain the support of LRC's neighboring communities while enabling necessary research operations to accomplish their programmatic goals. Noise control engineering capability resides within the Noise Program. The noise control engineering, based on specific exposure limits, is a fundamental consideration throughout the design phase of new test facilities, labs, and office buildings. In summary, the Noise Program

  12. Arquitectura y medio ambiente

    OpenAIRE

    Saura Carulla, Magdalena

    2003-01-01

    La arquitectura y la planificación son el resultado de una integración ponderada de conocimientos técnicos y una multiplicidad de aspectos relacionados con el conocimiento natural y social. En este trabajo el autor propone, desde el ámbito de las ciencias del medio ambiente, diversos planteamientos teóricos y prácticos relacionados con la arquitectura y el urbanismo. El conocimiento de la naturaleza de los sistemas naturales y de los sistemas ecosociales permite al diseñador aplicar un marco ...

  13. Ambient og intelligent teknologi

    DEFF Research Database (Denmark)

    Andersen, Peter Bøgh

     Dette notat handler om hvordan humanistisk og samfundsfaglig forskning i øjeblikket nyttiggøres ved udformning af IKT-anvendelser, der er indlejret i vor dagligdag i den forstand, at de indgår som et element i de aktiviteter, vi foretager på arbejdet eller i fritiden. Sådanne anvendelser kaldes ...... undertiden ambiente – noget der omslutter os på alle sider. Rapporten peger også på virkemidler som kan forbedre og øge en humanistisk og samfundsfaglig forskningsindsats....

  14. AOX y medio ambiente.

    OpenAIRE

    1996-01-01

    Los productos organohalogenados son muy utilizados por la industria y su presencia en el medio ambiente está siendo controlada. En los últimos años se han desarrollado varias técnicas de detección, siendo desde finales de los 80 los AOX (adsorbable organic halogens) uno de los parámetros sobre los que se han realizado más estudios. En muchos paises de la Unión Europea y en E.E.U.U. de América, la presencia de compuestos organohalogenados en aguas continentales y suelos está legislada indicand...

  15. Can Noise Kill People?

    Institute of Scientific and Technical Information of China (English)

    刘玲娣

    2007-01-01

    Someone is singing next door,but you feel unhappy because her singing is just making a noise.We know that too much noise makes people feel terrible. Scientists are still trying to find out more about noise,but already it is known that a noise of over 85 decibels can make some people tired and anxious.

  16. Next generation intelligent environments ambient adaptive systems

    CERN Document Server

    Nothdurft, Florian; Heinroth, Tobias; Minker, Wolfgang

    2016-01-01

    This book covers key topics in the field of intelligent ambient adaptive systems. It focuses on the results worked out within the framework of the ATRACO (Adaptive and TRusted Ambient eCOlogies) project. The theoretical background, the developed prototypes, and the evaluated results form a fertile ground useful for the broad intelligent environments scientific community as well as for industrial interest groups. The new edition provides: Chapter authors comment on their work on ATRACO with final remarks as viewed in retrospective Each chapter has been updated with follow-up work emerging from ATRACO An extensive introduction to state-of-the-art statistical dialog management for intelligent environments Approaches are introduced on how Trust is reflected during the dialog with the system.

  17. Active Noise Control for Dishwasher noise

    Science.gov (United States)

    Lee, Nokhaeng; Park, Youngjin

    2016-09-01

    The dishwasher is a useful home appliance and continually used for automatically washing dishes. It's commonly placed in the kitchen with built-in style for practicality and better use of space. In this environment, people are easily exposed to dishwasher noise, so it is an important issue for the consumers, especially for the people living in open and narrow space. Recently, the sound power levels of the noise are about 40 - 50 dBA. It could be achieved by removal of noise sources and passive means of insulating acoustical path. For more reduction, such a quiet mode with the lower speed of cycle has been introduced, but this deteriorates the washing capacity. Under this background, we propose active noise control for dishwasher noise. It is observed that the noise is propagating mainly from the lower part of the front side. Control speakers are placed in the part for the collocation. Observation part of estimating sound field distribution and control part of generating the anti-noise are designed for active noise control. Simulation result shows proposed active noise control scheme could have a potential application for dishwasher noise reduction.

  18. Ambient air pollution and annoyance responses from pregnant women

    Science.gov (United States)

    Llop, Sabrina; Ballester, Ferran; Estarlich, Marisa; Esplugues, Ana; Fernández-Patier, Rosalia; Ramón, Rosa; Marco, Alfredo; Aguirre, Amelia; Sunyer, Jordi; Iñiguez, Carmen; INMA-Valencia cohort

    ObjectivesTo describe the degree of annoyance caused by air pollution and noise in pregnant women in a birth cohort; to determine the modifying factors and their relation with exposure to ambient nitrogen dioxide (NO 2). MethodsThe study population was 855 pregnant women in Valencia, Spain. Annoyance caused by air pollution and noise, and explanatory factors were obtained from 786 pregnant women through a questionnaire. NO 2 levels were determined combining measurements at 93 points within the area of study and using geostatistical techniques (kriging). ResultsIn all 7.9% of the women reported high annoyance caused by air pollution and 13.1% high annoyance caused by noise. There was a significant difference in the degree of annoyance due to both air pollution and noise depending on the area where the women lived and their working status. The degree of annoyance correlated better with measured NO 2 at the municipality level (air pollution: r=0.53; noise: r=0.44) than at the individual level (air pollution and noise: r=0.21). On multivariate analysis, being a housewife, higher NO 2 levels and high traffic density were associated with higher degrees of annoyance. ConclusionsThere was a high percentage of women who perceived medium-high annoyance due to noise and air pollution. Annoyance caused by environmental pollutants could lead to some psychological effects, which impair the quality of life, or even physiological ones, which affect prenatal development.

  19. Obtaining and Estimating Low Noise Floors in Vibration Sensors

    DEFF Research Database (Denmark)

    Brincker, Rune; Larsen, Jesper Abildgaard

    2007-01-01

    For some applications like seismic applications and measuring ambient vibrations in structures, it is essential that the noise floors of the sensors and other system components are low and known to the user. Some of the most important noise sources are reviewed and it is discussed how the sensor...... can be designed in order to obtain a low noise floor. Techniques to estimate the noise floors for sensors are reviewed and are demonstrated on a commercial commonly used sensor for vibration testing. It is illustrated how the noise floor can be calculated using the coherence between simultaneous...... measurements on two channels, and it is illustrated how the singular values decomposition can be used for estimating noise floors and signals in multi-channel applications....

  20. Dioxinas y medio ambiente

    Directory of Open Access Journals (Sweden)

    María Teresa Frejo Moya

    2011-12-01

    Full Text Available Con el término genérico dioxinas se designa al grupo de las dibenzo-p-dioxinas policloradas (PCDD y de los dibenzofuranos policlorados (PCDF, representantes típicos de los compuestos orgánicos persistentes (COPs. Se obtienen como productos secundarios no deseados de diversos procesos industriales en los que se emplea cloro en alguna de sus etapas. Las dioxinas han centrado en la última década una parte importante de la investigación médica en salud ambiental debido a su notable toxicidad, ya que son las sustancias químicas peligrosas más potentes creadas por el hombre, afectando al sistema nervioso e inmunitario, estando implicadas en la aparición de distintos tipos de cáncer y provocando la aparición de alteraciones hormonales, clasificándose actualmente como disruptores endocrinos. Por otra parte, su persistencia en el medio ambiente, resistencia a la degradación, bioacumulación y capacidad de transporte atmosférico entre las diversas fases medioambientales hace que sean considerados actualmente como compuestos peligrosos para el ser humano.

  1. Crisis ambiental y cristianismo

    Directory of Open Access Journals (Sweden)

    Felipe Cárdenas

    2008-01-01

    Full Text Available En el artículo se identifican y reconocen algunas opciones que se pueden desarrollar en el cristianismo en relación con la problemática ambiental. Se aborda el dilema bíblico suscitado por interpretaciones antiecológicas y ecológicas. Con base en una lectura de la Biblia, de testimonios cristianos, y en una rememoria de estructuras institucionales, como la parroquia, se analiza el valor que tiene el mensaje cristiano en lo referido a la mitigación de la crisis ambiental.This article identifies and recognizes some options that can be developed in Christianity in relation to the environmental problem. It starts by analyzing the biblical dilemma provoked by both ecological and antiecological interpretations. Based on a reading of the Bible, testimonies from Christians and with a rememory of institutional structures, like the parish, the valué of the Christian message for mitigating the environmental crisis is analyzed.

  2. A novel method for the evaluation of polarization and hemisphere coverage of HF radio noise measurement antennas

    NARCIS (Netherlands)

    Witvliet, Ben A.; van Maanen, Erik; Bentum, Marinus Jan; Slump, Cornelis H.; Schiphorst, Roelof

    2015-01-01

    In HF (3-30 MHz) communications the ambient electromagnetic background noise or 'radio noise' generally is the limiting factor in reception. Radio noise measurements are needed for spectrum pollution control and to provide reference levels for radio system design. This article discusses the influenc

  3. A novel method for the evaluation of polarization and hemisphere coverage of HF radio noise measurement antennas

    NARCIS (Netherlands)

    Witvliet, Ben A.; van Maanen, Erik; Bentum, Marinus Jan; Slump, Cornelis H.; Schiphorst, Roelof

    2015-01-01

    In HF (3-30 MHz) communications the ambient electromagnetic background noise or 'radio noise' generally is the limiting factor in reception. Radio noise measurements are needed for spectrum pollution control and to provide reference levels for radio system design. This article discusses the

  4. Perception of Noise by Emergency Department Nurses

    Directory of Open Access Journals (Sweden)

    John Graneto

    2013-09-01

    Full Text Available Introduction: Noise in the emergency department (ED may be perceived to be high by both patients and nurses alike. This increased noise level is hypothesized to be responsible for communication interference and subsequent disruption of complex procedures and decision-making. The objective of this study is to quantify ambient noise level in an ED while obtaining coincident subjective surveys from nurses in the assessment of actual versus perceived noise.Methods: Data collected from surveys of ED nurses on each of 3 different dates revealed that sound levels within the selected ED were consistently at or below 70 decibels (dB of sound as measured by a sound level meter. This level of sound is of the same decibel of normal conversation at a 3-5 foot distance. Nurses surveyed overwhelmingly rated noise as “low” or “not loud” irrespective of a variance (though predominantly within a 10 dB range in actual sound decibel measurements.Results: Years of experience of work within emergency departments proved the most consistent predictor of nurses’ opinions on the frequency with which noise levels within the ED were louder than they should be, with more experienced nurses all ranking noise levels as “frequently” or “always” louder than they should be.Conclusion: Individual variance existed in how nurses felt that noise level affected work function. ED nurses��� perception of noise is perceived to be low and generally not interfering with their cognitive function. [West J Emerg Med. 2013;14(5:547–550.

  5. Study on noise prediction model and control schemes for substation.

    Science.gov (United States)

    Chen, Chuanmin; Gao, Yang; Liu, Songtao

    2014-01-01

    With the government's emphasis on environmental issues of power transmission and transformation project, noise pollution has become a prominent problem now. The noise from the working transformer, reactor, and other electrical equipment in the substation will bring negative effect to the ambient environment. This paper focuses on using acoustic software for the simulation and calculation method to control substation noise. According to the characteristics of the substation noise and the techniques of noise reduction, a substation's acoustic field model was established with the SoundPLAN software to predict the scope of substation noise. On this basis, 4 reasonable noise control schemes were advanced to provide some helpful references for noise control during the new substation's design and construction process. And the feasibility and application effect of these control schemes can be verified by using the method of simulation modeling. The simulation results show that the substation always has the problem of excessive noise at boundary under the conventional measures. The excess noise can be efficiently reduced by taking the corresponding noise reduction methods.

  6. Types for BioAmbients

    CERN Document Server

    Capecchi, Sara; 10.4204/EPTCS.19.7

    2010-01-01

    The BioAmbients calculus is a process algebra suitable for representing compartmentalization, molecular localization and movements between compartments. In this paper we enrich this calculus with a static type system classifying each ambient with group types specifying the kind of compartments in which the ambient can stay. The type system ensures that, in a well-typed process, ambients cannot be nested in a way that violates the type hierarchy. Exploiting the information given by the group types, we also extend the operational semantics of BioAmbients with rules signalling errors that may derive from undesired ambients' moves (i.e. merging incompatible tissues). Thus, the signal of errors can help the modeller to detect and locate unwanted situations that may arise in a biological system, and give practical hints on how to avoid the undesired behaviour.

  7. Types for BioAmbients

    Directory of Open Access Journals (Sweden)

    Sara Capecchi

    2010-02-01

    Full Text Available The BioAmbients calculus is a process algebra suitable for representing compartmentalization, molecular localization and movements between compartments. In this paper we enrich this calculus with a static type system classifying each ambient with group types specifying the kind of compartments in which the ambient can stay. The type system ensures that, in a well-typed process, ambients cannot be nested in a way that violates the type hierarchy. Exploiting the information given by the group types, we also extend the operational semantics of BioAmbients with rules signalling errors that may derive from undesired ambients' moves (i.e. merging incompatible tissues. Thus, the signal of errors can help the modeller to detect and locate unwanted situations that may arise in a biological system, and give practical hints on how to avoid the undesired behaviour.

  8. Residents' Annoyance Responses to Aircraft Noise Events

    OpenAIRE

    United States, National Aeronautics and Space Administration

    1983-01-01

    In a study conducted in the vicinity of Salt Lake City International Airport, community residents reported their annoyance with individual aircraft flyovers during rating sessions conducted in their homes. Annoyance ratings were obtained at different times of the day. Aircraft noise levels were measured, and other characteristics of the aircraft were noted by trained observers. Metrics commonly used for assessing aircraft noise were compared, but none performed significantly better than A-...

  9. Health effects of noise traffic: Beyond 'discomfort'

    Directory of Open Access Journals (Sweden)

    Julio Díaz Jiménez

    2015-12-01

    Full Text Available Noise in the workplace has traditionally been linked to both auditory and non-auditory disorders in people exposed. Recently the noise around airports has been linked to di erent pathologies, primarily cardiovascular-related. In recent years, environmental noise in large cities, due, to a large extent, to tra c, has been linked to various cardiovascular and respiratory diseases, and even to diabetes. In this article, in addition to giving a brief description of studies linking ambient noise and morbidity and of the di erent biological mechanisms involved that may explain these associations, we present the results of a series of studies which link by means of time-series analysis link tra c noise in the city of Madrid and daily mortality for cardiovascular, respiratory and diabetes-related reasons in the group of 65+ year-olds, as well as the annual mortality attributable to tra c noise in Madrid and its comparison with that attributable to PM2.5.

  10. Vienna international airport noise abatement

    Directory of Open Access Journals (Sweden)

    Heidelinde Jelinek-Nigitz

    2016-03-01

    Full Text Available Purpose: On the topic of sustainable aviation a study was carried out to measure the difference between the actual change in air traffic noise and the airport’s residents’ perception of the noise change at Vienna International Airport. Therefore, a questionnaire was developed in cooperation with the airport and an online survey was conducted. Design/methodology/approach: For the survey of the opinion of the affected population of the surrounding communities, a web based online questionnaire is created and distributed via various channels including e-mail, and online forums. After the basic structure of the questionnaire had been defined, the questions were developed in cooperation with employees form the environmental department of VIE, who had a sustainable influence on the questions’ order and formulation. As the survey was supposed to be answered by residents around VIE. Findings: Results of the online study show that only parts of the participants are affected by air traffic noise at VIE. Even less experienced a significant change over the last five years. About one third of the participants stated that they are affected by air traffic noise in one way or another. The majority of these people live in Lower Austria, the federal state in which the airport is located. The participants obviously judge air traffic noise during day time more importantly than air traffic noise at night. Research limitations/implications: Due to the low number of returns, no statistically relevant conclusions can be drawn, the results of the survey can be used to make some general statements. Originality/value: Economic growth and deregulation lead to growing aircraft operations. Vienna International Airport with its approximately 260,000 flight movements per year is the biggest airport in Austria and a major hub in Europe. The combination of constantly growing air transport and the resulting noise exposure, as well as the steadily increasing

  11. Shot-noise-limited optical Faraday polarimetry with enhanced laser noise cancelling

    Energy Technology Data Exchange (ETDEWEB)

    Li, Jiaming [School of Physics and Engineering, Sun Yat-sen University, Guangzhou 510275 (China); Department of Physics, Indiana University Purdue University Indianapolis, Indianapolis, Indiana 46202 (United States); Luo, Le, E-mail: leluo@iupui.edu; Carvell, Jeff; Cheng, Ruihua [Department of Physics, Indiana University Purdue University Indianapolis, Indianapolis, Indiana 46202 (United States); Lai, Tianshu, E-mail: stslts@mail.sysu.edu.cn; Wang, Zixin, E-mail: wangzix@mail.sysu.edu.cn [School of Physics and Engineering, Sun Yat-sen University, Guangzhou 510275 (China)

    2014-03-14

    We present a shot-noise-limited measurement of optical Faraday rotations with sub-ten-nanoradian angular sensitivity. This extremely high sensitivity is achieved by using electronic laser noise cancelling and phase sensitive detection. Specially, an electronic laser noise canceller with a common mode rejection ratio of over 100 dB was designed and built for enhanced laser noise cancelling. By measuring the Faraday rotation of ambient air, we demonstrate an angular sensitivity of up to 9.0×10{sup −9} rad/√(Hz), which is limited only by the shot-noise of the photocurrent of the detector. To date, this is the highest angular sensitivity ever reported for Faraday polarimeters in the absence of cavity enhancement. The measured Verdet constant of ambient air, 1.93(3)×10{sup −9}rad/(G cm) at 633 nm wavelength, agrees extremely well with the earlier experiments using high finesse optical cavities. Further, we demonstrate the applications of this sensitive technique in materials science by measuring the Faraday effect of an ultrathin iron film.

  12. An Analysis of Aircraft Flyover Noise

    Science.gov (United States)

    1978-04-01

    NOTES IS. KEY WORDS (Continue on reverse aide if necessary and identify by block number) Aircraft Noise Community Noise Exposure Excess Attenuation 20...ISTRACT (Continue an revereo aide If necessary and identify by block number) A detailed analysis of a set of Boeing 727 aircraft flyover noise...c .- t 00 H --.: LA~0 H viH -T0 H ~ LCY CO ’.0 U-\\ 00 O 0 0 00000000 0 0 0 o 0 0 O -’ C) m 0 0 UL\\ 0 0 0 uLA 0 0 C0 0 0 C0 0 45 o)Ma - : c C D %zo

  13. Engagement in community music classes sparks neuroplasticity and language development in children from disadvantaged backgrounds

    National Research Council Canada - National Science Library

    Kraus, Nina; Hornickel, Jane; Strait, Dana L; Slater, Jessica; Thompson, Elaine

    2014-01-01

    Children from disadvantaged backgrounds often face impoverished auditory environments, such as greater exposure to ambient noise and fewer opportunities to participate in complex language interactions during development...

  14. Reforma constitucional y ambiente

    Directory of Open Access Journals (Sweden)

    Teodoro Bustamante

    2013-09-01

    Full Text Available América Latina está atravesada por una ola de reformas constitucionales. Sus causas, las expectativas que ellas despiertan, los riesgos que se han asociado al proceso de lucha política en su entorno, son temas de un análisis fundamentalmente político; pero hay algunos aspectos en los cuales ese debate tiene una directa repercusión sobre el tema ambiental. En el caso del Ecuador, esto se refleja en el hecho de que una de las innovaciones que se proponen, se refieren a una nueva forma de abordar los temas ambientales, básicamente se establecen Derechos de la Naturaleza.

  15. Crustal velocity changes associated with the Wenchuan M8.0 earthquake by auto-correlation function analysis of seismic ambient noise%汶川地震区地壳速度相对变化的环境噪声自相关研究

    Institute of Scientific and Technical Information of China (English)

    赵盼盼; 陈九辉; Michel Campillo; 刘启元; 李昱; 李顺成; 郭飚; 王峻; 齐少华

    2012-01-01

    A temporal seismic array consisted of 297 broadband seismographs was deployed in Western Sichuan (100°~105°E, 26°~32°N) in 2006, and the observation covered the great 2008 Wenchuan earthquake. We used the continuous three-component ambient noise data from January, 2007 to October, 2008, recorded at the 137 stations north of 29°N, to study the crust seismic velocity changes before and after the earthquake. For every single station, three autocorrelation functions (ACF) and three cross correlation functions (CCF) are calculated and stacked in 10 days for three components of noise data respectively. Then we estimated the relative velocity changes by measuring travel time shifts between the 50-day-moving-average stacks and the reference empirical correlation functions. We obtained the characteristic of spatial distribution of relative velocity changes caused by Wenchuan earthquake. Our results indicate that ACF analysis can get similar coseismic velocity changes pattern with the CCF method, and the distribution of coseismic velocity changes is closely correlated with the volumetric strain changes during the Wenchuan earthquake. We also found an area of velocity increase in the region where the Longmenshan Fault zone adjoins the Xianshuihe Fault zone. This area is consistent with the faults that the Coulomb stress increased by the occurrence of the Wenchuan earthquake as predicted by the source mechanism and surface deformation. We also found that the crustal velocity increase lasted for about 2 months and then decreased with ubiquitous stress release in the studying region.%2006年中国地震局地质研究所地震动力学国家重点实验室在川西地区(100°E~105°E,26°N~32°N)布设了由297个宽频带地震台组成的密集流动地震观测台阵.本文利用川西流动地震台阵29°N以北地区的137个台站2007年1月至2008年10月的连续三分量地震环境噪声记录,研究了汶川地震震前震后地壳速度变化特征.借助

  16. Noise monitoring and modeling on four lanning of national highways corridor.

    Science.gov (United States)

    Devi, P Shiyamala; Rosaline, G Vimala

    2012-10-01

    Noise emitted from traffic contributes to about 55% of total noise pollution in India. This paper is an effort of a research conducted to quantify and analyze the traffic noise emissions along the Salem-Namakkal NH 7 corridor with an ultimate objective of setting up a traffic noise model based on the traffic noise conditions of Indian cities. Noise levels and other variables have been measured in 15 locations to develop a statistical regression model based on A-weighted equivalent noise level for Indian road conditions. The ambient noise levels recorded represent the higher noise levels prevailing along the NH 7 corridor. The Receptor Oriented Technique adopted proves to be helpful in characterizing the ambient noise levels along the study area. The newly developed road traffic noise model can be effectively used as a decision support tool for predicting equivalent noise levels in the cities of India. The present analysis also reveals that the magnitude of noise levels has an increasing trend due to the increased traffic flow and presents the attention needed for minimization. The mitigation measures and the future evaluations are discussed.

  17. Solar noise storms

    CERN Document Server

    Elgaroy, E O

    2013-01-01

    Solar Noise Storms examines the properties and features of solar noise storm phenomenon. The book also presents some theories that can be used to gain a better understanding of the phenomenon. The coverage of the text includes topics that cover the features and behavior of noise storms, such as the observable features of noise storms; the relationship between noise storms and the observable features on the sun; and ordered behavior of storm bursts in the time-frequency plane. The book also covers the spectrum, polarization, and directivity of noise storms. The text will be of great use to astr

  18. CCN activation of ambient and "synthetic ambient" urban aerosol

    Science.gov (United States)

    Burkart, Julia; Reischl, Georg; Steiner, Gerhard; Bauer, Heidi; Leder, Klaus; Kistler, Magda; Puxbaum, Hans; Hitzenberger, R.

    2013-05-01

    In this study, the Cloud Condensation Nuclei (CCN) activation properties of the urban aerosol in Vienna, Austria, were investigated in a long term (11 month) field study. Filter samples of the aerosol below 100 nm were taken in parallel to these measurements, and later used to generate "synthetic ambient" aerosols. Activation parameters of this "synthetic ambient" aerosol were also obtained. Hygroscopicity parameters κ [1] were calculated both for the urban and the "synthetic ambient" aerosol and also from the chemical composition. Average κ for the "synthetic ambient" aerosol ranged from 0.20 to 0.30 with an average value of 0.24, while the κ from the chemical composition of this "synthetic ambient" aerosol was significantly higher (average 0.43). The full results of the study are given elsewhere [2,3].

  19. Existing Noise Level at Railway Stations in Malaysia

    Directory of Open Access Journals (Sweden)

    Shahidan Shahiron

    2017-01-01

    Full Text Available Railway transportation known as one of the most environmental friendly transportation mode. However, the significance problems of railway transportation are noise pollution and negatively impact the wellbeing of the whole community. Unfortunately, there has been lack of public awareness about the noise level produce by the railway transportation in Malaysia. This study investigates the noise level produced by railway transportation in Malaysia specifically by Keretapi Tanah Melayu Berhad (KTMB. Methods of collecting existing noise level at railway stations in Malaysia are briefly discussed in this study. The finding indicates that the noise level produced by the railway transportation in Malaysia which is by KTMB is considered as dangerous to human being and also exceed the noise limit that has been assigned by Department of Environment Ministry of Natural Resources and Environment of Malaysia. A better noise barrier and improved material should be developed to mitigate the existing noise level produced by railway transportations in Malaysia.

  20. Helicopter Noise And Noise Abatement Procedures

    Directory of Open Access Journals (Sweden)

    Borivoj Galović

    2004-03-01

    Full Text Available The helicopter generated noise at and around the airports islower than the noise generated by aeroplanes, since their numberof operations, i. e. the number of takeoffs and landings ismuch lower than the takeoffs and landings of the aeroplanes.Out of some hundred operations a day, helicopters participatewith approximately 15%, but the very impact of noise is by nomeans negligible, since the number of helicopter flights aboveurban areas is constantly increasing.This paper attempts to analyse this phenomenon and thetype of helicopter generated noise, its negative impacts, to explainthe flight procedures and the operative procedures duringtakeoff, landing and overflight of helicopters in operations inthe vicinity and outside airports, as well as the methods of measuringand determining the limit of noise [eve~ and the resultingproblems.

  1. Modeling deep ocean shipping noise in varying acidity conditions.

    Science.gov (United States)

    Udovydchenkov, Ilya A; Duda, Timothy F; Doney, Scott C; Lima, Ivan D

    2010-09-01

    Possible future changes of ambient shipping noise at 0.1-1 kHz in the North Pacific caused by changing seawater chemistry conditions are analyzed with a simplified propagation model. Probable decreases of pH would cause meaningful reduction of the sound absorption coefficient in near-surface ocean water for these frequencies. The results show that a few decibels of increase may occur in 100 years in some very quiet areas very far from noise sources, with small effects closer to noise sources. The use of ray physics allows sound energy attenuated via volume absorption and by the seafloor to be compared.

  2. Foro Ambiental : CEDENMA, Asamblea Constituyente

    Directory of Open Access Journals (Sweden)

    Anne-Lise Naizot

    2013-09-01

    Full Text Available Resumen de la Mesa redonda: Orientaciones de la nueva Constitución ecuatoriana en materia ambiental: ¿avances o retrocesos en relación con el marco político y filosófico ambiental vigente en algunos países de la región?

  3. Validating Firewalls in Mobile Ambients

    DEFF Research Database (Denmark)

    Nielson, Flemming; Nielson, Hanne Riis; Hansen, René Rydhof

    1999-01-01

    The ambient calculus is a calculus of computation that allows active processes (mobile ambients) to move between sites. A firewall is said to be protective whenever it denies entry to attackers not possessing the required passwords. We devise a polynomial time algorithm for rejecting proposed...

  4. Impact of Vessel Noise on Oyster Toadfish (Opsanus tau) Behavior and Implications for Underwater Noise Management

    Science.gov (United States)

    Krahforst, Cecilia S.

    Underwater noise and its impacts on marine life are growing management concerns. This dissertation considers both the ecological and social concerns of underwater noise, using the oyster toadfish (Opsanus tau) as a model species. Oyster toadfish call for mates using a boatwhistle sound, but increased ambient noise levels from vessels or other anthropogenic activities are likely to influence the ability of males to find mates. If increased ambient noise levels reduce fish fitness then underwater noise can impact socially valued ecosystem services (e.g. fisheries). The following ecological objectives of the impacts of underwater noise on oyster toadfish were investigated: (1) to determine how noise influences male calling behavior; (2) to assess how areas of high vessel activity ("noisy") and low vessel activity ("quiet") influence habitat utilization (fish standard length and occupancy rate); and (3) to discover if fitness (number of clutches and number of embryos per clutch) is lower in "noisy" compared with "quiet" sites. Field experiments were executed in "noisy" and "quiet" areas. Recorded calls by males in response to playback sounds (vessel, predator, and snapping shrimp sounds) and egg deposition by females ("noisy" vs. "quiet" sites) demonstrated that oyster toadfish are impacted by underwater noise. First, males decreased their call rates and called louder in response to increased ambient noise levels. Second, oyster toadfish selected nesting sites in areas with little or no inboard motorboat activity. Third, male oyster toadfish at "noisy" sites either had no egg clutches on their shelters or the number of embryos per clutch was significantly lower than in the "quiet" areas. Underwater noise and disturbance from vessels are influencing the fitness of the oyster toadfish. The social significance of the growing concerns regarding underwater noise was investigated by identifying dominant themes found within two types of texts: four recent underwater noise

  5. Removing Noise From Pyrosequenced Amplicons

    Directory of Open Access Journals (Sweden)

    Davenport Russell J

    2011-01-01

    Full Text Available Abstract Background In many environmental genomics applications a homologous region of DNA from a diverse sample is first amplified by PCR and then sequenced. The next generation sequencing technology, 454 pyrosequencing, has allowed much larger read numbers from PCR amplicons than ever before. This has revolutionised the study of microbial diversity as it is now possible to sequence a substantial fraction of the 16S rRNA genes in a community. However, there is a growing realisation that because of the large read numbers and the lack of consensus sequences it is vital to distinguish noise from true sequence diversity in this data. Otherwise this leads to inflated estimates of the number of types or operational taxonomic units (OTUs present. Three sources of error are important: sequencing error, PCR single base substitutions and PCR chimeras. We present AmpliconNoise, a development of the PyroNoise algorithm that is capable of separately removing 454 sequencing errors and PCR single base errors. We also introduce a novel chimera removal program, Perseus, that exploits the sequence abundances associated with pyrosequencing data. We use data sets where samples of known diversity have been amplified and sequenced to quantify the effect of each of the sources of error on OTU inflation and to validate these algorithms. Results AmpliconNoise outperforms alternative algorithms substantially reducing per base error rates for both the GS FLX and latest Titanium protocol. All three sources of error lead to inflation of diversity estimates. In particular, chimera formation has a hitherto unrealised importance which varies according to amplification protocol. We show that AmpliconNoise allows accurate estimates of OTU number. Just as importantly AmpliconNoise generates the right OTUs even at low sequence differences. We demonstrate that Perseus has very high sensitivity, able to find 99% of chimeras, which is critical when these are present at high

  6. Noise Gating Solar Images

    Science.gov (United States)

    DeForest, Craig; Seaton, Daniel B.; Darnell, John A.

    2017-08-01

    I present and demonstrate a new, general purpose post-processing technique, "3D noise gating", that can reduce image noise by an order of magnitude or more without effective loss of spatial or temporal resolution in typical solar applications.Nearly all scientific images are, ultimately, limited by noise. Noise can be direct Poisson "shot noise" from photon counting effects, or introduced by other means such as detector read noise. Noise is typically represented as a random variable (perhaps with location- or image-dependent characteristics) that is sampled once per pixel or once per resolution element of an image sequence. Noise limits many aspects of image analysis, including photometry, spatiotemporal resolution, feature identification, morphology extraction, and background modeling and separation.Identifying and separating noise from image signal is difficult. The common practice of blurring in space and/or time works because most image "signal" is concentrated in the low Fourier components of an image, while noise is evenly distributed. Blurring in space and/or time attenuates the high spatial and temporal frequencies, reducing noise at the expense of also attenuating image detail. Noise-gating exploits the same property -- "coherence" -- that we use to identify features in images, to separate image features from noise.Processing image sequences through 3-D noise gating results in spectacular (more than 10x) improvements in signal-to-noise ratio, while not blurring bright, resolved features in either space or time. This improves most types of image analysis, including feature identification, time sequence extraction, absolute and relative photometry (including differential emission measure analysis), feature tracking, computer vision, correlation tracking, background modeling, cross-scale analysis, visual display/presentation, and image compression.I will introduce noise gating, describe the method, and show examples from several instruments (including SDO

  7. Noise-Measuring Method

    DEFF Research Database (Denmark)

    Diamond, J. M.

    1965-01-01

    A noise-measuring method based on the use of a calibrated noise generator and an output meter with a special scale is described. The method eliminates the effect of noise contributions occurring in the circuits following the device under test....

  8. Introductory guide to noise

    CSIR Research Space (South Africa)

    Ferreira, T.M

    1973-01-01

    Full Text Available The difference between sound and noise varies from one human being to another. Noise, then, is simply unwanted sound and to understand how it can be combatted we must know more about its nature. A guide of acceptable levels of noise are investigated....

  9. Decreasing the uncertainty of atomic clocks via real-time noise distinguish

    CERN Document Server

    Dong, Richang; Wei, Rong; Wang, Wenli; Zou, Fan; Du, Yuanbo; Chen, Tingting; Wang, Yuzhu

    2016-01-01

    The environmental perturbation on atoms is the key factor restricting the performance of atomic frequency standards, especially in long term scale. In this letter, we demonstrate a real-time noise distinguish operation of atomic clocks. The operation improves the statistical uncertainty by about an order of magnitude of our fountain clock which is deteriorated previously by extra noises. The frequency offset bring by the extra noise is also corrected. The experiment proves the real-time noise distinguish operation can reduce the contribution of ambient noises and improve the uncertainty limit of atomic clocks.

  10. Potential Uses of Anthropogenic Noise as a Source of Information in Animal Sensory and Communication Systems.

    Science.gov (United States)

    Stansbury, Amanda; Deecke, Volker; Götz, Thomas; Janik, Vincent M

    2016-01-01

    Although current research on the impact of anthropogenic noise has focused on the detrimental effects, there is a range of ways by which animals could benefit from increased noise levels. Here we discuss two potential uses of anthropogenic noise. First, local variations in the ambient-noise field could be used to perceive objects and navigate within an environment. Second, introduced sound cues could be used as a signal for prey detection or orientation and navigation. Although the disadvantages of noise pollution will likely outweigh any positive effects, it is important to acknowledge that such changes may benefit some species.

  11. Magnetic flux noise in copper oxide superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Ferrari, M.J.

    1991-11-01

    Magnetic flux noise and flux creep in thin films and single crystals of YBa{sub 2}Cu{sub 3}O{sub 7-x}, Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8+x}, Tl{sub 2}Ca{sub 2}Ba{sub 2}Cu{sub 3}O{sub x}, and TlCa{sub 2}Ba{sub 2}Cu{sub 3}O{sub x} are measured with a superconducting quantum interference device (SQUID). The noise power spectrum generally scales as 1/f (f is frequency) from 1 Hz to 1 kHz, increases with temperature, and decreases in higher-quality films. It is proportional to the magnetic field B in which the sample is cooled, at least in the range 0.1 mT < B < 3 mT. A model of thermally activated vortex motion is developed which explains the dependence of the noise on frequency, temperature, current, and applied magnetic field. The pinning potential is idealized as an ensemble of double wells, each with a different activation energy separating the two states. From the noise measurements, this model yields the distribution of pinning energies in the samples, the vortex hopping distance, the number density of mobile vortices, and the restoring force on a vortex at a typical pinning site. The distribution of pinning energies in YBa{sub 2}Cu{sub 3}O{sub 7-x} shows a broad peak below 0.1 eV. The small ambient magnetic field, and the detection of noise even in the absence of a driving force, insure that the measured pinning energies are characteristic of isolated vortices near thermal equilibrium. The observed vortex density in fields much less than 0.1 mT is too large to be explained by the ambient field, suggesting a mechanism intrinsic to the sample which produces trapped vortices.

  12. Adaptive Noise Reduction System

    Directory of Open Access Journals (Sweden)

    Ivana Ropuš

    2013-01-01

    Full Text Available Noise is an all-present environment pollutant, considered to be one of the greatest contemporary pollutants. World-wide, co-ordinated actions are conducted in order to develop systems which minimise the noise influence onto society.In this article we argue that novel approach to suppression of influence of noise is useful. Furthermore, we argue that the efficient approach is formulation of the efficient, broadly applicable, ubiquituous, adaptive noise-protection system. The approach combines the natural noise-protection form based on plants with the artificially formed coatings.Elements of the system are discussed, its formation and maintenance analysed and perspectives conjectured.

  13. Low-noise amplifier

    Directory of Open Access Journals (Sweden)

    V. B. Gulkov

    2012-11-01

    Full Text Available The mixture of signal and noise processing device is considered in this article. It contains two channels: the main channel (MC contains the mixture of signal and noise, and compensation channel (CC that extracts just a noise from the mixture. The feature of the processing circuit is that the mixture samples are formed by short impulses at the moments of passing signal through zero. Further antiphase noise is set in the channels, adder by which the noise is removed from mixture is set on the cannels output. Study of the described device was carried out for simulated AM signal and white Gaussian noise in simulation environment Matlab. The results are shown, that device reduces noise by 16 dB of power.

  14. Conhecimento, interdisciplinaridade e Psicologia Ambiental

    OpenAIRE

    Ombretta Romice

    2005-01-01

    Responde às questões - como os métodos da Psicologia Ambiental devem ser discutidos em um enquadramento interdisciplinar; a Psicologia Ambiental pede alguma abordagem metodológica especial; como a intervenção ambiental é determinada pela interdisciplinaridade; quais são estas disciplinas e como elas se relacionam entre si - baseando-se em experiências profissionais como orientador em um projeto com comunidade, com habitação popular e exclusão social em vários países da Europa, e como consulto...

  15. Ciencia, cultura y medio ambiente

    OpenAIRE

    Ángel Maya, Augusto

    1991-01-01

    La crisis ambiental no es un fenómeno exclusivamente de orden tecnológico. Interroga por igual las organizaciones socio-políticas y los instrumentos científicos para el estudio de la realidad: posiblemente uno de los obstáculos mayores para el encuentro de soluciones adecuadas a la crisis ambiental, radica no en deficiencias de orden técnico, sino en la incapacidad de los instrumentos teóricos para entenderla. La crisis del medio ambiente ha puesto en claro la ambivalencia no sólo de la organ...

  16. La crisis del medio ambiente

    OpenAIRE

    Juan Carlos Quintero Vélez; Clemencia Camacho Delgado

    2013-01-01

    Este artículo, introducción al tema del medio ambiente, pretende proporcionar conceptos básicos para analizar y dimensionar el impacto que genera el hombre sobre los sistemas que soportan la vida. Para entender estos problemas, es indispensable partir de un análisis básico de la relación entre el hombre actual, su medio ambiente, sus necesidades y sus actividades. El autor revisa los antecedentes, las causas y las consecuencias de la crisis ambiental internacional, e intenta dar explicación a...

  17. Sociología ambiental

    OpenAIRE

    Domínguez Gómez, José Andrés; Aledo Tur, Antonio

    2001-01-01

    Este libro pretende ser un manual para los alumnos de las licenciaturas de sociología, ecología, ciencias ambientales o economía y profesionales de esas ramas que estén interesados en el estudio de las relaciones entre medio ambiente y sociedad desde una aproximación sociológica. El manual está divido en dos partes. La primera desarrolla las principales teorías sociológicas sobre el medio ambiente, así como el heterogéneo pensamiento ambiental. La segunda parte, ofrece capítulos diversos en l...

  18. Quality of Green's Functions Improved by Automatic Detection and Removal of Coherent Anthropogenic Noise

    Science.gov (United States)

    Williams, E. F.; Martin, E. R.; Biondi, B. C.; Lindsey, N.; Ajo Franklin, J. B.; Wagner, A. M.; Bjella, K.; Daley, T. M.; Dou, S.; Freifeld, B. M.; Robertson, M.; Ulrich, C.

    2016-12-01

    We analyze the impact of identifying and removing coherent anthropogenic noise on synthetic Green's functions extracted from ambient noise recorded on a dense linear distributed acoustic sensing (DAS) array. Low-cost, low-impact urban seismic surveys are possible with DAS, which uses dynamic strain sensing to record seismic waves incident to a buried fiber optic cable. However, interferometry and tomography of ambient noise data recorded in urban areas include coherent noise from near-field infrastructure such as cars and trains passing the array, in some cases causing artifacts in estimated Green's functions and potentially incorrect surface wave velocities. Based on our comparison of several methods, we propose an automated, real-time data processing workflow to detect and reduce the impact of these events on data from a dense array in an urban environment. We utilize a recursive STA/LTA (short-term average/long-term average) algorithm on each channel to identify sharp amplitude changes typically associated with an event arrival. In order to distinguish between optical noise and physical events, an event is cataloged only if STA/LTA is triggered on enough channels across the array in a short time window. For each event in the catalog, a conventional semblance analysis is performed across a straight segment of the array to determine whether the event has a coherent velocity signature. Events that demonstrate a semblance peak at low apparent velocities (5-50 m/s) are assumed to represent coherent transportation-related noise and are down-weighted in the time domain before cross-correlation. We show the impact of removing such noise on estimated Green's functions from ambient noise data recorded in Richmond, CA in December 2014. This method has been developed for use on a continuous time-lapse ambient noise survey collected with DAS near Fairbanks, AK, and an upcoming ambient noise survey on the Stanford University campus using DAS with a re

  19. NASA's Aeroacoustic Tools and Methods for Analysis of Aircraft Noise

    Science.gov (United States)

    Rizzi, Stephen A.; Lopes, Leonard V.; Burley, Casey L.

    2015-01-01

    Aircraft community noise is a significant concern due to continued growth in air traffic, increasingly stringent environmental goals, and operational limitations imposed by airport authorities. The ability to quantify aircraft noise at the source and ultimately at observers is required to develop low noise aircraft designs and flight procedures. Predicting noise at the source, accounting for scattering and propagation through the atmosphere to the observer, and assessing the perception and impact on a community requires physics-based aeroacoustics tools. Along with the analyses for aero-performance, weights and fuel burn, these tools can provide the acoustic component for aircraft MDAO (Multidisciplinary Design Analysis and Optimization). Over the last decade significant progress has been made in advancing the aeroacoustic tools such that acoustic analyses can now be performed during the design process. One major and enabling advance has been the development of the system noise framework known as Aircraft NOise Prediction Program2 (ANOPP2). ANOPP2 is NASA's aeroacoustic toolset and is designed to facilitate the combination of acoustic approaches of varying fidelity for the analysis of noise from conventional and unconventional aircraft. The toolset includes a framework that integrates noise prediction and propagation methods into a unified system for use within general aircraft analysis software. This includes acoustic analyses, signal processing and interfaces that allow for the assessment of perception of noise on a community. ANOPP2's capability to incorporate medium fidelity shielding predictions and wind tunnel experiments into a design environment is presented. An assessment of noise from a conventional and Hybrid Wing Body (HWB) aircraft using medium fidelity scattering methods combined with noise measurements from a model-scale HWB recently placed in NASA's 14x22 wind tunnel are presented. The results are in the form of community noise metrics and

  20. The socio-economic impact of noise: a method for assessing noise annoyance.

    Science.gov (United States)

    Gjestland, Truls

    2007-01-01

    Norwegian authorities have developed and adopted a method for assessing the magnitude of noise impact on a community in quantitative terms. The method takes into account all levels of noise annoyance experienced by all the residents in an area and transforms these data into a single quantity that can also be expressed in monetary terms. This method is contrary to other commonly used assessment methods where only a certain fraction of the impacted people, e.g. those "highly annoyed," is considered.

  1. Core/Combustor Noise - Research Overview

    Science.gov (United States)

    Hultgren, Lennart S.

    2017-01-01

    Contributions from the combustor to the overall propulsion noise of civilian transport aircraft are starting to become important due to turbofan design trends and advances in mitigation of other noise sources. Future propulsion systems for ultra-efficient commercial air vehicles are projected to be of increasingly higher bypass ratio from larger fans combined with much smaller cores, with ultra-clean burning fuel-flexible combustors. Unless effective noise-reduction strategies are developed, combustor noise is likely to become a prominent contributor to overall airport community noise in the future. This presentation gives a brief overview of the NASA outlook on pertinent issues and far-term research needs as well as current and planned research in the core/combustor-noise area. The research described herein is aligned with the NASA Ultra-Efficient Commercial Transport strategic thrust and is supported by the NASA Advanced Air Vehicle Program, Advanced Air Transport Technology Project, under the Aircraft Noise Reduction Subproject. The overarching goal of the Advanced Air Transport Technology (AATT) Project is to explore and develop technologies and concepts to revolutionize the energy efficiency and environmental compatibility of fixed wing transport aircrafts. These technological solutions are critical in reducing the impact of aviation on the environment even as this industry and the corresponding global transportation system continue to grow.

  2. Humans, Fish, and Whales: How Right Whales Modify Calling Behavior in Response to Shifting Background Noise Conditions.

    Science.gov (United States)

    Parks, Susan E; Groch, Karina; Flores, Paulo; Sousa-Lima, Renata; Urazghildiiev, Ildar R

    2016-01-01

    This study investigates the role of behavioral plasticity in the variation of sound production of southern right whales (Eubalaena australis) in response to changes in the ambient background noise conditions. Data were collected from southern right whales in Brazilian waters in October and November 2011. The goal of this study was to quantify differences in right whale vocalizations recorded in low background noise as a control, fish chorus noise, and vessel noise. Variation in call parameters were detected among the three background noise conditions and have implications for future studies of noise effects on whale sound production.

  3. Measuring and interpreting the mechanical thermal noise spectrum in a MEMS

    Science.gov (United States)

    Rocha, L. A.; Cretu, E.; Wolffenbuttel, R. F.

    2005-07-01

    The meta-stability of the pull-in displacement of an electrostatically operated parallel plate micromechanical structure is used for the capacitive measurement of the mechanical-thermal noise spectrum in a MEMS. Pull-in time depends on force and is not affected by the input-referred noise of the readout circuit. Repeatedly bringing the microstructure to pull-in while measuring the pull-in time followed by FFT enables the measurement of the mechanical noise spectrum with a non-mechanical noise level set primarily by the resolution of the time measurement. The white noise level is found to be in agreement with the theory on damping. The 1/f noise spectrum is found to be independent of ambient gas pressure with a 1/f noise-white noise cross-over frequency at 0.007 Hz for a 1 bar gas pressure and is reproducible for devices fabricated in the same process and the same run.

  4. ICBEN review of research on the biological effects of noise 2011-2014.

    Science.gov (United States)

    Basner, Mathias; Brink, Mark; Bristow, Abigail; de Kluizenaar, Yvonne; Finegold, Lawrence; Hong, Jiyoung; Janssen, Sabine A; Klaeboe, Ronny; Leroux, Tony; Liebl, Andreas; Matsui, Toshihito; Schwela, Dieter; Sliwinska-Kowalska, Mariola; Sörqvist, Patrik

    2015-01-01

    The mandate of the International Commission on Biological Effects of Noise (ICBEN) is to promote a high level of scientific research concerning all aspects of noise-induced effects on human beings and animals. In this review, ICBEN team chairs and co-chairs summarize relevant findings, publications, developments, and policies related to the biological effects of noise, with a focus on the period 2011-2014 and for the following topics: Noise-induced hearing loss; nonauditory effects of noise; effects of noise on performance and behavior; effects of noise on sleep; community response to noise; and interactions with other agents and contextual factors. Occupational settings and transport have been identified as the most prominent sources of noise that affect health. These reviews demonstrate that noise is a prevalent and often underestimated threat for both auditory and nonauditory health and that strategies for the prevention of noise and its associated negative health consequences are needed to promote public health.

  5. An environmental education program for maroon communities: the results of a work carried out along the Cabiunas-Vitoria gas pipeline; Programa de educacao ambiental para comunidades quilombolas: a experiencia do trabalho realizado no Gasoduto Cabiunas-Vitoria

    Energy Technology Data Exchange (ETDEWEB)

    Caldas, Flaviana V.; Serricchio, Claudio [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil); Souza, Izabel C.A. de; Vieira, Rosa M. [Telsan Engenharia, Vitoria, ES (Brazil)

    2008-07-01

    One of the Environmental Programmes developed for the works of Cabiunas-Vitoria Gas Pipeline (GASCAV) intended to fulfill the conditions of the Installation License, which defined the preparation of Specific Studies and Environmental Programmes to five quilombo communities located at GASCAV's influence area. The challenge of PETROBRAS/Engenharia/IETEG/IEDT Environmental Team was to align the Company's strategic guidelines related to Environmental and Social Responsibility to the necessary criteria for the approval of this Programme by environmental agencies which inspected the Programme: IBAMA (Brazilian Institute of Environment and Renewable Natural Resources) and FCP (Palmares Cultural Foundation). This work aimed to present the methodology adopted to the proposal of the Environmental Education Programme to Quilombo Communities, as well as to discuss the results achieved with the implementation of this Programme. The results allowed to conclude that the actions developed at the quilombo communities has disseminated the environmental concepts and related to the afro culture, has established partnerships and strengthen the relationship with the surrounding communities. This fact promotes the integration of the Work's economic interests with the social and environmental ones, generating a socio environmental conscience among the residents. (author)

  6. assessment of noise pollutio noise pollutio noise pollution from ...

    African Journals Online (AJOL)

    eobe

    sawmill noise on the metropolis was developed. the metropolis was ... INTRODUCTION. INTRODUCTION ... auditory fatigue and hearing loss, and indirect n auditory effects such as speech interfere annoyance .... acoustic environment for workers [29]. In particular, ..... and corn mills”, African Journal of Health Science,. Vol.

  7. MEIO AMBIENTE: IMPACTOS AMBIENTAIS

    Directory of Open Access Journals (Sweden)

    Cláudia Maria Prado dos Santos

    2016-03-01

    Full Text Available This study presents an overview of the environmental issues and impacts found in the contemporary world due the man's actions which cause destruction of nature, being associated with this question, the consumerism, production of solid waste, pesticides, erosion, water contamination, added with the fact that the planet is facing the exploitation of many natural resources inappropriately, such as deforestation. Due these factors, we see the problem in Brazil, there are numerous environmental protection laws, but in reality, are "not met", and this is due to the ignorance of the population and lack of environmental education projects for the community inserted in ru