His Excellency Mr Alexandros Alexandris Ambassador, Permanent Representative of Greece to the United Nations Office at Geneva and other international organizations in Switzerland and Officials from the East Macedonia and Thrace Region Greece

CERN Multimedia

Jean-Claude Gadmer

2013-01-01

His Excellency Mr Alexandros Alexandris Ambassador, Permanent Representative of Greece to the United Nations Office at Geneva and other international organizations in Switzerland and Officials from the East Macedonia and Thrace Region Greece

His Excellency Mr Cristóbal González-Aller Jurado Ambassador Extraordinary and Plenipotentiary Permanent Representative of the Kingdom of Spain to the United Nations Office and other international organisations in Geneva

CERN Multimedia

Ordan, Julien Marius

2017-01-01

His Excellency Mr Cristóbal González-Aller Jurado Ambassador Extraordinary and Plenipotentiary Permanent Representative of the Kingdom of Spain to the United Nations Office and other international organisations in Geneva

H.E. Mr Ichiro Fujisaki Ambassador Extraordinary and Plenipotentiary Permanent Representative of Japan to the Office of the United Nations and the other international organisations in Geneva visit the LHCb Experiment at point 8.

CERN Multimedia

Maximilien Brice

2007-01-01

H.E. Mr Ichiro Fujisaki Ambassador Extraordinary and Plenipotentiary Permanent Representative of Japan to the Office of the United Nations and the other international organisations in Geneva visit the LHCb Experiment at point 8.

His Excellency Mr Maurizio Enrico Serra Ambassador Permanent Representative of Italy to the United Nations Office and other international organisations in Geneva on the occasion of the Inauguration of the Industrial Exhibition Italy@ CERN

CERN Multimedia

Bennett, Sophia Elizabeth

2017-01-01

His Excellency Mr Maurizio Enrico Serra Ambassador Permanent Representative of Italy to the United Nations Office and other international organisations in Geneva on the occasion of the Inauguration of the Industrial Exhibition Italy@ CERN

26 August 2016 - K. Singye Ambassador Extraordinary and Plenipotentiary Permanent Representative of the Kingdom of Bhutan to the United Nations Office and other international organisations in Geneva signing the CERN Guest book with Adviser P. Fassnacht

CERN Multimedia

Bennett, Sophia Elizabeth

2016-01-01

His Excellency Mr Kinga Singye Ambassador Extraordinary and Plenipotentiary Permanent Representative of the Kingdom of Bhutan to the United Nations Office and other international organisations in Geneva Friday 26 August 2016

30th August 2010 - Permanent Representative of the People's Republic of China to the United Nations Office at Geneva, Ambassador Y. He visiting the CMS underground experimental area and LHC tunnel with CERN Director-General R. Heuer and Collaboration Spokesperson G. Tonelli.

CERN Multimedia

Maximilien Brice

2010-01-01

CERN-HI-1008197 01: in the LHC tunnel at Point 5: CMS Collaboaration Spokesperson G. Tonelli, Mrs L. Jianping (Ambassador's spouse), Mrs B. Heuer, Permanent Representative of the People's Republic of China to the United Nations Office at Geneva, Ambassador Y. He, CERN Director-General R. Heuer and Adviser R. Voss; CERN-HI-1008197 57: in front of the CMS experiment at LHC point 5: CMS technical Coordinator A. Ball, Mrs L. Jianping (Ambassador's spouse), Permanent Representative of the People's Republic of China to the United Nations Office at Geneva, Ambassador Y. He; Mrs B. Heuer, CERN Director-General R. Heuer, CMS Collaboaration Spokesperson G. Tonelli and Adviser R. Voss. CERN-HI-1008197 02 - 14: Welcome in front of building 3562 at CMS. Head of International relations F: Pauss gives the introduction talk to the delegation. CERN-HI-1008197 15 - 25: visiting CMS control room at Point 5 with Collaboration Spokesperson G. Tonelli; CERN-HI-1008197 26 - 29: visiting the service cavern in the CMS underground ar...

4 September 2015 - Signature of the guest book by Ambassador Oh Joon, Seventy-first President, United Nations Economic and Social Council (ECOSOC), Ambassador and Permanent Representative of the Republic of Korea to the United Nations in New York with Director for Administration and General infrastructure S. Lettow.

CERN Multimedia

Gadmer, Jean-Claude Robert

2015-01-01

4 September 2015 - Signature of the guest book by Ambassador Oh Joon, Seventy-first President, United Nations Economic and Social Council (ECOSOC), Ambassador and Permanent Representative of the Republic of Korea to the United Nations in New York with Director for Administration and General infrastructure S. Lettow. Also present: Head of IT Department F. Hemmer with E. Bjorgo and F. Pisano visiting the UNITAR’s operational satellite applications programme on CERN site in building 597. The delegation is accompanied throughout by Adviser to the Director-General, in charge of Relations with International Organisations M. Bona.

19 May 2015 - M. Ciobanu Ambassador Extraordinary and Plenipotentiary Permanent Representative of Romania to the United Nations Office and other international organisations in Geneva on the occasion of the inauguration of the industrial event Romania@CERN

CERN Multimedia

Egli, Laurent

2015-01-01

Mrs Maria Ciobanu Ambassador Extraordinary and Plenipotentiary Permanent Representative of Romania to the United Nations Office and other international organisations in Geneva on the occasion of the inauguration of the industrial event Romania@CERN

9 JUne 2016 - Permanent Representative of the Republic of Poland to the United Nations Office and other international organisations in Geneva Ambassador P. Stachańczyk signing the guest book with CERN Director for International Relations C. Warakaulle.

CERN Multimedia

Bennett, Sophia Elizabeth

2016-01-01

His Excellency Mr Piotr Stachańczyk Ambassador Extraordinary and Plenipotentiary Permanent Representative of the Republic of Poland to the United Nations Office and other international organisations in Geneva

4 July 2016 - S. Dalil Ambassador Extraordinary and Plenipotentiary Permanent Representative of the Islamic Republic of Afghanistan to the United Nations Office and other international organisations in Geneva signing the Guest Book with Director-General F. Gianotti. P. Fassnacht present throughout.

CERN Multimedia

Brice, Maximilien

2016-01-01

Her Excellency Dr Suraya Dalil Ambassador Extraordinary and Plenipotentiary Permanent Representative of the Islamic Republic of Afghanistan to the United Nations Office and other international organisations in Geneva

13 May 2016 - Ambassador Extraordinary and Plenipotentiary, Permanent Representative of the Republic of Azerbaijan to the United Nations Office and other international organisations in Geneva V. Sadiqov signing the guest book with Head of Associate Member and Non-Member State Relations E. Tsesmelis and Adviser C. Schäfer. Permanent Mission First Secretary H. Huseynov is also present.

CERN Multimedia

Brice, Maximilien

2016-01-01

His Excellency Mr Vaqif Sadiqov Ambassador Extraordinary and Plenipotentiary Permanent Representative of the Republic of Azerbaijan to the United Nations Office and other international organisations in Geneva

11 July 2012 - Extraordinary and Plenipotentiary Ambassador M. Alemu Getahun, Permanent Representative of the Federal Democratic Republic of Ethiopia to the United Nations Office and other international organisations in Geneva signing the guest book with Head of International relations F. Pauss.

CERN Multimedia

Maximilien Brice

2012-01-01

11 July 2012 - Extraordinary and Plenipotentiary Ambassador M. Alemu Getahun, Permanent Representative of the Federal Democratic Republic of Ethiopia to the United Nations Office and other international organisations in Geneva signing the guest book with Head of International relations F. Pauss.

His Excellency Mr Farukh Amil, Ambassador Extraordinary and Plenipotentiary Permanent Representative of the Islamic Republic of Pakistan to the United Nations Office and other international organisations in Geneva on the occasion of the inauguration of the Pakistan@CERN industrial exhibition

CERN Multimedia

Ordan, Julien Marius

2018-01-01

Visit of His Excellency Mr Farukh Amil, Ambassador Extraordinary and Plenipotentiary Permanent Representative of the Islamic Republic of Pakistan to the United Nations Office and other international organisations in Geneva on the occasion of the inauguration of the Pakistan@CERN industrial exhibition

24th August 2010 - Bhutan Permanent Representative to the United Nations Office, Ambassador Y. Dorji signing the Guest Book with Head of International Relations F. Pauss; visiting the source and linacs and the CMS control centre, building 354, with Austrian Physicist M. Hoch.

CERN Document Server

Jean-Claude Gadmer

2010-01-01

24th August 2010 - Bhutan Permanent Representative to the United Nations Office, Ambassador Y. Dorji signing the Guest Book with Head of International Relations F. Pauss; visiting the source and linacs and the CMS control centre, building 354, with Austrian Physicist M. Hoch.

14 February 2012 - Ambassadors from Algeria, Brunei Darussalam, Canada, Chad, Tunisia, Permanent Representatives to the United Nations Office at Geneva in the LHC tunnel at Point 1, ATLAS visitor centre, and ATLAS underground experimental area, throughout accompanied by Advisers P. Fassnacht, E. Tsesmelis and R. Voss

CERN Multimedia

Jean-Claude Gadmer

2012-01-01

14 February 2012 - Ambassadors from Algeria, Brunei Darussalam, Canada, Chad, Tunisia, Permanent Representatives to the United Nations Office at Geneva in the LHC tunnel at Point 1, ATLAS visitor centre, and ATLAS underground experimental area, throughout accompanied by Advisers P. Fassnacht, E. Tsesmelis and R. Voss

3 July 2007 - Ambassador A. Navarro Llanos, Permanent Representative of the Republic of Bolivia to the United Nations Office and other international organisations in Geneva signing a Co-operation Agreement concerning Scientific and Technical Co-operation in High-Energy Physics with CERN Director General R. Aymar.

CERN Multimedia

Maximilien Brice

2007-01-01

3 July 2007 - Ambassador A. Navarro Llanos, Permanent Representative of the Republic of Bolivia to the United Nations Office and other international organisations in Geneva signing a Co-operation Agreement concerning Scientific and Technical Co-operation in High-Energy Physics with CERN Director General R. Aymar.

14 November 2016 - Ambassador Extraordinary and Plenipotentiary H. M. Cima, Permanent Representative of the Argentine Republic to the United Nations Office and other international organisations in Geneva signing the guest book with CERN Director-General F. Gianotti, Director for International Relations C. Warakaulle; Adviser J. Salicio Diez and V. Perez-Reale, CERN HR Department, are also present.

CERN Multimedia

Brice, Maximilien

2016-01-01

His Excellency Mr Héctor Marcelo Cima Ambassador Extraordinary and Plenipotentiary Permanent Representative of the Argentine Republic to the United Nations Office and other international organisations in Geneva

9 September 2016 - A. Krivas, Ambassador Extraordinary and Plenipotentiary, Permanent Representative of the Republic of Lithuania to the United Nations Office and other international organisations in Geneva meeting CERN Director-General F. Gianotti and signing the Guest Book with Director for International Relations C. Warakaulle and Adviser for Relations with the Republic of Lithuania C. Schäfer

CERN Multimedia

Brice, Maximilien

2016-01-01

His Excellency Mr. Andrius Krivas Ambassador and Permanent Representative of Republic of Lithuania signing the CERN Guest book with Director for International Relations C. Warakaulle and advisor C. Schaefer

6 January 2011 - Extraordinary and plenipotentiary Ambassador M. Kovačič, Permanent Representative of the Republic of Slovenia to the United Nations Office and other international Organisations at Geneva (and Permanent Mission Staff)signing the guest book with CERN Director-General R. Heuer; in the ATLAS visitor centre, ATLAS underground area and LHC tunnel with Collaboration Spokesperson F. Gianotti and Adviser T. Kurtyka.

CERN Multimedia

Jean-Claude Gadmer

2011-01-01

6 January 2011 - Extraordinary and plenipotentiary Ambassador M. Kovačič, Permanent Representative of the Republic of Slovenia to the United Nations Office and other international Organisations at Geneva (and Permanent Mission Staff)signing the guest book with CERN Director-General R. Heuer; in the ATLAS visitor centre, ATLAS underground area and LHC tunnel with Collaboration Spokesperson F. Gianotti and Adviser T. Kurtyka.

6 November 2013 - Permanent Representative of Chile to the United Nations Office and Other international organizations in Geneva Ambassador J. Balmaceda Serigos signing the guest book with Adviser for Latin America J. Salicio Diez; visiting the ATLAS experimental cavern with Spokesperson D. Charlton (Spouse, Son and First Secretary present).

CERN Multimedia

Anna Pantelia

2013-01-01

6 November 2013 - Permanent Representative of Chile to the United Nations Office and Other international organizations in Geneva Ambassador J. Balmaceda Serigos signing the guest book with Adviser for Latin America J. Salicio Diez; visiting the ATLAS experimental cavern with Spokesperson D. Charlton (Spouse, Son and First Secretary present).

28 June 2012 - Ambassador I. Piperkov, Permanent Representative of Bulgaria to the United Nations Office and other international organisations in Geneva and Spouse visiting CMS experimental area with Collaboration Deputy Spokesperson T. Camporesi and CERN Control Centre with M. Benedikt.Senior physicist L. Litov accompanies the delegation throughout.

CERN Multimedia

Jean-Claude Gadmer

2012-01-01

28 June 2012 - Ambassador I. Piperkov, Permanent Representative of Bulgaria to the United Nations Office and other international organisations in Geneva and Spouse visiting CMS experimental area with Collaboration Deputy Spokesperson T. Camporesi and CERN Control Centre with M. Benedikt.Senior physicist L. Litov accompanies the delegation throughout.

27 June 2012 - Ambassador K. Pierce, Permanent Representative of the United Kingdom of Great Britain and Northern Ireland to the United Nations Office and other international organisations in Geneva visiting the LHC tunnel at Point 5 with Department Head P. Collier and CMS control room with Former Collaboration Spokesperson J. Virdee.

CERN Multimedia

Laurent Egli

2012-01-01

27 June 2012 - Ambassador K. Pierce, Permanent Representative of the United Kingdom of Great Britain and Northern Ireland to the United Nations Office and other international organisations in Geneva visiting the LHC tunnel at Point 5 with Department Head P. Collier and CMS control room with Former Collaboration Spokesperson J. Virdee.

10 February 2012 - Permanent Representative of the Republic of India to the Conference on Disarmament, United Nations Office at Geneva Ambassador Mehta signing the guest book with International Relations Adviser R. Voss;in the LHC tunnel at Point 2 and ALICE underground experimental area with Collaboration Deputy Spokesperson Y. Schutz.

CERN Document Server

Maximilien Brice

2012-01-01

10 February 2012 - Permanent Representative of the Republic of India to the Conference on Disarmament, United Nations Office at Geneva Ambassador Mehta signing the guest book with International Relations Adviser R. Voss;in the LHC tunnel at Point 2 and ALICE underground experimental area with Collaboration Deputy Spokesperson Y. Schutz.

12 December 2014 - Bangladesh Permanent Representative to the UNOG A. M. Shameem signing a cooperation agreeement and the CERN guest book with CERN Director-General R. Heuer.

CERN Multimedia

Brice, Maximilien

2014-01-01

His Excellency Mr Ahsan M. Shameem Extraordinary and Plenipotentiary Ambassador Permanent Representative of the People's Republic of Bangladesh to the United Nations Office and other international organisations in Geneva

H.E. Mr Leonid A.Skotnikov Ambassador,PermanentRepresentative of the Russian Federation to the United Nations and other International Organisations in Geneva

CERN Multimedia

Patrice Loïez

2003-01-01

Photo 01: H.E. Mr Leonid A. Skotnikov, Ambassador of the Russian Federation to the United Nations and other International Organisations in Geneva (right) with CERN Director-General, L. Maiani. Photo 02: Mr Leonid A. Skotnikov, Ambassador of the Russian Federation to the United Nations and other International Organisations in Geneva. Photo 03: Mr Leonid A. Skotnikov, Ambassador of the Russian Federation to the United Nations and other International Organisations in Geneva (right) with CERN Director-General, L. Maiani.

H.E. Mr Leonid A. Skotnikov, Ambassador, Permanent Representative of the Russian Federation to the United Nations and other International Organisations in Geneva

CERN Multimedia

Maximilien Brice

2003-01-01

Photo 01: H.E. Mr Leonid A. Skotnikov, Ambassador of the Russian Federation to the United Nations and other International Organisations in Geneva (centre) with (from left to right) V. Kaftanov, Ph. Bloch, N. Koulberg, F. Grishaev Photo 02: H.E. Mr Leonid A. Skotnikov, Ambassador of the Russian Federation to the United Nations and other International Organisations in Geneva (centre) with Ph. Bloch (behind the Ambassador, V. Kaftanov) visiting the crystal laboratory in building 27.

20 December 2013 - R. M. Cordeiro Dunlop Ambassador Permanent Representative of Brazil to the United Nations Office and other international organisations in Geneva visiting the LHC tunnel at Point 5 with CMS Collaboration, CERN Team Leader A. Petrilli and signing the Guest Book with CERN Director-General. Accompanied by J. Salicio and R. Voss throughout.

CERN Multimedia

Jean-Claude Gadmer

2013-01-01

20 December 2013 - R. M. Cordeiro Dunlop Ambassador Permanent Representative of Brazil to the United Nations Office and other international organisations in Geneva visiting the LHC tunnel at Point 5 with CMS Collaboration, CERN Team Leader A. Petrilli and signing the Guest Book with CERN Director-General. Accompanied by J. Salicio and R. Voss throughout.

H.E. Mr Leonid A. Skotnikov, Ambassador, Permanent Representative of the Russian Federation to the United Nations and other International Organisations in Geneva

CERN Multimedia

Patrice Loïez

2003-01-01

Photo 01: H.E. Mr Leonid A. Skotnikov, Ambassador of the Russian Federation to the United Nations and other International Organisations in Geneva (centre) with (from left to right) F. Grishaev, Adviser, Mission of the Russian Federation and R. Cashmore. Photo 02: H.E. Mr Leonid A. Skotnikov, Ambassador of the Russian Federation to the United Nations and other International Organisations in Geneva (right) with F. Grishaev, Adviser, Mission of the Russian Federation.

The Honourable Lawrence Gonzi Prime Minister of Malta visiting CMS experiment on 10 January 2008, from left to right Ministry of Finance Permanent Secretary A. Camilleri, Ambassador V. Camilleri, Maltese Representative at CERN N. Sammut, Prime Minister L. Gonzi, CMS Collaboration Spokesperson T. Virdee, CERN Director-General R. Aymar, University of Malta Rector J. Camilleri, Adviser to Director-General E. Tsesmelis.

CERN Multimedia

Maximilien Brice

2008-01-01

The Honourable Lawrence Gonzi Prime Minister of Malta visiting CMS experiment on 10 January 2008, from left to right Ministry of Finance Permanent Secretary A. Camilleri, Ambassador V. Camilleri, Maltese Representative at CERN N. Sammut, Prime Minister L. Gonzi, CMS Collaboration Spokesperson T. Virdee, CERN Director-General R. Aymar, University of Malta Rector J. Camilleri, Adviser to Director-General E. Tsesmelis.

30 January 2012 - Ecuadorian Ambassador Gallegos Chiriboga, Permanent Representative to the United Nations Office and other International Organisations at Geneva and San Francisco de Quito University Vice Chancellor C. Montùfar visiting CMS surface facilities and underground experimental area with CMS Collaboration L. Sulak and Collaboration Deputy Spokesperson T. Camporesi, throughout accompanied by Head of International Relations F. Pauss.

CERN Multimedia

Michael Hoch

2012-01-01

30 January 2012 - Ecuadorian Ambassador Gallegos Chiriboga, Permanent Representative to the United Nations Office and other International Organisations at Geneva and San Francisco de Quito University Vice Chancellor C. Montùfar visiting CMS surface facilities and underground experimental area with CMS Collaboration L. Sulak and Collaboration Deputy Spokesperson T. Camporesi, throughout accompanied by Head of International Relations F. Pauss.

20 September 2013 - Ambassador Z. Akram , Permanent Representative of the Islamic Republic of Pakistan to the United Nations Office and other international organisations in Geneva (3rd) with Mechanical and Materials Engineering Group Leader F. Bertinelli, Head of International Relations R. Voss, CMS Collaboration, Quaid-i-Azam University H. Hoorani, Permanent Mission First Secretary U. Iqbal Jadoon and LHC Consolidation, Industrial Services, Technology Department JP. Tock in front of the lift to the LHC tunnel at Point 1. Site Manager M. Décombaz on the back.

CERN Multimedia

Anna Pantelia

2013-01-01

20 September 2013 - Ambassador Z. Akram , Permanent Representative of the Islamic Republic of Pakistan to the United Nations Office and other international organisations in Geneva (3rd) with Mechanical and Materials Engineering Group Leader F. Bertinelli, Head of International Relations R. Voss, CMS Collaboration, Quaid-i-Azam University H. Hoorani, Permanent Mission First Secretary U. Iqbal Jadoon and LHC Consolidation, Industrial Services, Technology Department JP. Tock in front of the lift to the LHC tunnel at Point 1. Site Manager M. Décombaz on the back.

28 August 2013 - Ambassador Extraordinary and Plenipotentiary Permanent Representative of Ireland to the United Nations Office and specialized institutions in Geneva Mr G. Corr signing the guest book with CERN Director-General R. Heuer; visiting the LHCb experimental area with LHCb Collaboration Spokesperson P. Campana and visiting the LHC tunnel at Point 8 with International Relations Adviser for Ireland E. Tsesmelis. Accompanied throughout by R. McNulty.

CERN Multimedia

Jean-Claude Gadmer

2013-01-01

28 August 2013 - Ambassador Extraordinary and Plenipotentiary Permanent Representative of Ireland to the United Nations Office and specialized institutions in Geneva Mr G. Corr signing the guest book with CERN Director-General R. Heuer; visiting the LHCb experimental area with LHCb Collaboration Spokesperson P. Campana and visiting the LHC tunnel at Point 8 with International Relations Adviser for Ireland E. Tsesmelis. Accompanied throughout by R. McNulty.

H.E. Mr Leonid A. Skotnikov, Ambassador, Permanent Representative of the Russian Federation to the United Nations and other International Organisations in Geneva

CERN Multimedia

Patrice Loïez

2003-01-01

H.E. Mr Leonid A. Skotnikov, Ambassador of the Russian Federation to the United Nations and other International Organisations in Geneva (far right). On his right F. Grishaev, Adviser, Mission of the Russian Federation; opposite N. Koulberg and L. Maiani, CERN Director general

8 March 2012 - Extraordinary and plenipotentiary Ambassador R. van Schreven, Permanent Representative of the Kingdom of the Netherlands to the United Nations Office and other international organisations at Geneva, signing the guest book with CERN Director-General R. Heuer and Head of International Relations F. Pauss; in the ATLAS experimental area with Deputy Spokesperson Y. Schutz; throughout accompanied by Former Deputy Department Head and Senior Physicist L. Linssen.

CERN Multimedia

Maximilien Brice

2012-01-01

8 March 2012 - Extraordinary and plenipotentiary Ambassador R. van Schreven, Permanent Representative of the Kingdom of the Netherlands to the United Nations Office and other international organisations at Geneva, signing the guest book with CERN Director-General R. Heuer and Head of International Relations F. Pauss; in the ATLAS experimental area with Deputy Spokesperson Y. Schutz; throughout accompanied by Former Deputy Department Head and Senior Physicist L. Linssen.

2 February 2016 - Signature of CERN guest book by Ambassador of Montenegro to the United Nations Office and other international organisations in Geneva N.Kaluđerović with Adviser C. Schäfer. S. Damjanovic is also present.

CERN Multimedia

Brice, Maximilien

2016-01-01

His Excellency Mr Nebojša Kaluđerović Ambassador Extraordinary and Plenipotentiary Permanent Representative of Montenegro to the United Nations Office and other international organisations in Geneva

9 February 2012 - Permanent Representative of the Kingdom of Spain to the United Nations Office at Geneva and other International Organisations, Ambassador A. Santos Maraver signing the guest book with CERN Director-General; in the CERN Control Centre with N. Catalan; visiting the LHC tunnel at Point 5 and CMS underground experimental area with Collaboration Spokesperson J. Incandela; throughout accompanied by Adviser J. Salicio Diez and Former Physics Deputy Department Head L. Alvarez Gaumé.

CERN Multimedia

Visual Media Office

2012-01-01

9 February 2012 - Permanent Representative of the Kingdom of Spain to the United Nations Office at Geneva and other International Organisations, Ambassador A. Santos Maraver signing the guest book with CERN Director-General; in the CERN Control Centre with N. Catalan; visiting the LHC tunnel at Point 5 and CMS underground experimental area with Collaboration Spokesperson J. Incandela; throughout accompanied by Adviser J. Salicio Diez and Former Physics Deputy Department Head L. Alvarez Gaumé.

Her Excellency Ms Pamela Hamamoto, Ambassador, Permanent Representative of the United States of America to the United Nations Office and other International Organisations in Geneva

CERN Multimedia

Brice, Maximilien

2015-01-01

Signature ceremony with Ambassador P. Hamamoto and Director-General R. Heuer - Neutrino Protocol I (CERN- DoE) - Nuclear Physics experiment Protocol I (CERN-DoE) - Experiments Protocol II (CERN-DoE-NSF) - Accelerator Protocol III (CERN-DoE) - Addendum I to Accelerator Protocol III (CERN-DoE)

Prostate Cancer Ambassadors

Science.gov (United States)

Vines, Anissa I.; Hunter, Jaimie C.; Carlisle, Veronica A.; Richmond, Alan N.

2016-01-01

African American men bear a higher burden of prostate cancer than Caucasian men, but knowledge about how to make an informed decision about prostate cancer screening is limited. A lay health advisor model was used to train “Prostate Cancer Ambassadors” on prostate cancer risk and symptoms, how to make an informed decision for prostate-specific antigen screening, and how to deliver the information to members of their community. Training consisted of two, 6-hour interactive sessions and was implemented in three predominantly African American communities over an 8-month period between 2013 and 2014. Following training, Ambassadors committed to contacting at least 10 people within 3 months using a toolkit composed of wallet-sized informational cards for distribution, a slide presentation, and a flip chart. Thirty-two Ambassadors were trained, with more than half being females (59%) and half reporting a family history of prostate cancer. Prostate cancer knowledge improved significantly among Ambassadors (p ≤ .0001). Self-efficacy improved significantly for performing outreach tasks (p < .0001), and among women in helping a loved one with making an informed decision (p = .005). There was also an improvement in collective efficacy in team members (p = .0003). Twenty-nine of the Ambassadors fulfilled their commitment to reach at least 10 people (average number of contacts per Ambassador was 11). In total, 355 individuals were reached with the prostate cancer information. The Ambassador training program proved successful in training Ambassadors to reach communities about prostate cancer and how to make an informed decision about screening. PMID:27099348

Identifying ambassador species for conservation marketing

Directory of Open Access Journals (Sweden)

E.A. Macdonald

2017-10-01

Full Text Available Conservation relies heavily on external funding, much of it from a supportive public. Therefore it is important to know which species are most likely to catalyse such funding. Whilst previous work has looked at the physical attributes that contribute to a species' appeal, no previous studies have tried to examine the extent to which a species' sympatriots might contribute to it's potential as flagship for wider conservation. Therefore, here we estimate ‘flexibility’ and ‘appeal’ scores for all terrestrial mammals (n = 4320 and identify which of these might serve as ambassadors (defined as both highly appealing and flexible. Relatively few mammals (between 240 and 331 emerged as ambassadors, with carnivores featuring heavily in this group (representing 5% of terrestrial mammals but 39% of ambassadors. ‘Top ambassadors’ were defined as those with both flexibility and appeal scores greater than 1 standard deviation above the mean. Less than a quarter of the 20 most endangered and evolutionary distinct species in this study were classed as ambassadors, highlighting the need for surrogate species to catalyse conservation effort in areas with such priority species. This is the first global analysis bringing together flexibility and appeal for all terrestrial mammals, and demonstrates an approach for determining how best to market species in order to achieve maximal conservation gain in a world with urgent conservation need but limited resources.

Pengaruh Brand Ambassador Terhadap Minat Beli Konsumen MD Clinic By Lazeta

Directory of Open Access Journals (Sweden)

Nurvita Septya Ningrum

2016-10-01

Full Text Available This research at MD Clinic by Lazeta which is in the beauty services that offer health care and facial, under of PT. Medina Global Care. MD Cilinic by Lazeta use the brand ambassador of introducing their products. The selection of brand ambassador motivated by positive image brought by the celebrities. Brand ambassadors chosen by the company as a symbol or a marker to represent the wishes and needs of prospective customers. MD Clinic by Lazeta choose Syahnaz as a brand ambassador for their products which is expected to to represent the product of MD Clinic by Lazeta, so the message can be understood by the consumer, who eventually would to lead the purchase intention. The purpose of this research was to investigate the influence of brand ambassadors on consumer purchase intention MD Clinic by Lazeta, Study on Business Administration Students year in 2103 Telkom University. Researchers used quantitative research methods. This research is population research, because all population is being respondent in this research. Populations of this research are 137 respondents. Collecting data in this research is conducted by using questionnaire distributed to all respondents, which all Students on Business Administration Telkom University who knows the MD Clinic by Lazeta. Data were analyzed using simple regression analysis and descriptive analysis.The results showed that the Brand Ambassador impact of consumer purchase intention on MD Clinic by Lazeta at the Students on Business Administration Telkom University years in 2013. Based on the calculation of the coefficient of determination (R2 can be seen the influence of brand ambassador variable (X on purchase intention (Y is 42.9%. While the remaining 57.1% is influenced by other factors which not examined in this research such as, pricing, marketing strategy and others.

Climate Ambassador Programmes in Municipalities

DEFF Research Database (Denmark)

Jørgensen, Michael Søgaard; Pedersen, Stine Rahbek

2016-01-01

Some Danish municipalities have developed ambassador programmes which generate environmental and climate change mitigation efforts in local public administrations and institutions. This chapter analyses the characteristics and experiences of four ambassador programmes now operating...

Climate Literacy Ambassadors

Science.gov (United States)

Ackerman, S. A.; Mooney, M. E.

2011-12-01

The Climate Literacy Ambassadors program is a collaborative effort to advance climate literacy led by the Cooperative Institute of Meteorological Satellite Studies (CIMSS) at the University of Wisconsin-Madison. With support from NASA, CIMSS is coordinating a three-tiered program to train G6-12 teachers to be Ambassadors of Climate Literacy in their schools and communities. The complete training involves participation at a teacher workshop combined with web-based professional development content around Global and Regional Climate Change. The on-line course utilizes e-learning technology to clarify graphs and concepts from the 2007 Intergovernmental Panel on Climate Change Summary for Policy Makers with content intricately linked to the Climate Literacy: The Essential Principles of Climate Science. Educators who take the course for credit can develop lesson plans or opt for a project of their choosing. This session will showcase select lesson plans and projects, ranging from a district-wide action plan that engaged dozens of teachers to Ambassadors volunteering at the Aldo Leopold Climate Change Nature Center to a teacher who tested a GLOBE Student Climate Research Campaign (SCRC) learning project with plans to participate in the SCRC program. Along with sharing successes from the CIMSS Climate Literacy Ambassadors project, we will share lessons learned related to the challenges of sustaining on-line virtual educator communities.

Perceptions of Texas 4-H Livestock Ambassadors on Career Development, Higher Education, and Leadership Development

Science.gov (United States)

Zanolini, William F.; Rayfield, John; Ripley, Jeff

2013-01-01

Selected 4-H youth participated in the Texas 4-H Livestock Ambassador program. Forty-five youth participated in the 3-day program delivered by university professors and staff, Texas AgriLife Extension faculty and industry representatives. An instrument was developed and administered to the Texas 4-H Livestock Ambassadors at the end of their first…

29 March 2012 - Austrian Niederösterreich Governor E. Pröll with Klubobmann and Chairman of EBG MedAustron GmbH Council K. Schneeberger, Director General for Cultural Policy Amabssador M.Eichtinger and Permanent Representative of Austria to the UNO and Austrian Delegate to CERN Council Ambassador C. Strohal in the MedAustron facility at CERN building 184.

CERN Multimedia

Jean-Claude Gadmer

2012-01-01

CERN-HI-1203078 01 - 13: visit of LINAC 3 with M. Benedikt CERN-HI-1203078 14 - 20: in the Roy Billinge room CERN-HI-1203078 21- 22: visit of the LEIR accelerator in building 354 CERN-HI-1203078 23 - 55: signing the guest book with CERN Director-General R. Heuer and Head of International Relations F. Pauss CERN-HI-1203078 56 - 99: in building 184, Governor Pröll and CERN Director-General R. Heuer switch on the MedAustron ion source to produce the proton beam; visit MedAustron facility. CERN-HI-1203078 32:from left to right: Klubobmann and Chairman of EBG MedAustron GmbH Council K. Schneeberger; Director-General R. Heuer;Niederösterreich Governor E. Pröll;Head of International Relations F. Pauss;Permanent Representative of Austria to the UNO and Austrian Delegate to CERN Council Ambassador C. Strohal.

17th September 2010 - Signature of a joint declaration by CERN represented by Director-General R. Heuer and the Brazilian Centre for Physics Research (CBPF) represented by R. Shellard, witnessed by the Ambassador to the United Nations Office M. N. Farani Azevêdo, signing the guest book.

CERN Multimedia

Maximilien Brice

2010-01-01

17th September 2010 - Signature of a joint declaration by CERN represented by Director-General R. Heuer and the Brazilian Centre for Physics Research (CBPF) represented by R. Shellard, witnessed by the Ambassador to the United Nations Office M. N. Farani Azevêdo, signing the guest book.

UN: new Permanent Representative of Monaco presents credentials

CERN Multimedia

2003-01-01

"Michel Borghini, the new Permanent Representative of Monaco to the United Nations, presented his credentials to Secretary-General Kofi Annan today. He worked as a researcher at CERN from 1965 to 1969" (1/3 page).

Expanding Public Outreach: The Solar System Ambassadors Program

Science.gov (United States)

Ferrari, K.

2001-12-01

The Solar System Ambassadors Program is a public outreach program designed to work with motivated volunteers across the nation. These competitively selected volunteers organize and conduct public events that communicate exciting discoveries and plans in Solar System research, exploration and technology through non-traditional forums. In 2001, 206 Ambassadors from almost all 50 states bring the excitement of space to the public. Ambassadors are space enthusiasts, who come from all walks of life. Last year, Ambassadors conducted almost 600 events that reached more than one-half million people in communities across the United States. The Solar System Ambassadors Program is sponsored by the Jet Propulsion Laboratory (JPL) in Pasadena, California, an operating division of the California Institute of Technology (Caltech) and a lead research and development center for the National Aeronautics and Space Administration (NASA). Participating JPL organizations include Cassini, Galileo, STARDUST, Outer Planets mission, Genesis, Ulysses, Voyager, Mars missions, Discovery missions NEAR and Deep Impact, Deep Space Network, Solar System Exploration Forum and the Education and Public Outreach Office. Each Ambassador participates in on-line (web-based) training sessions that provide interaction with NASA scientists, engineers and project team members. As such, each Ambassador's experience with the space program becomes personalized. Training sessions provide Ambassadors with general background on each mission and educate them concerning specific mission milestones, such as launches, planetary flybys, first image returns, arrivals, and ongoing key discoveries. Additionally, projects provide limited supplies of materials, online resource links and information. Integrating volunteers across the country in a public-engagement program helps optimize project funding set aside for education and outreach purposes, establishing a nationwide network of regional contacts. At the same time

Training Young Astronomers in EPO: An Update on the AAS Astronomy Ambassadors Program

Science.gov (United States)

Fraknoi, A.; Fienberg, R. T.; Gurton, S.; Schmitt, A. H.; Schatz, D.; Prather, E. E.

2014-07-01

The American Astronomical Society, with organizations active in EPO, has launched professional-development workshops and a community of practice to help improve early-career astronomers' ability to communicate effectively. Called “Astronomy Ambassadors,” the program provides mentoring and training for participants, from advanced undergraduates to beginning faculty. By learning to implement effective EPO strategies, Ambassadors become better teachers, meeting presenters, and representatives of our science to the public and government. Because young astronomers are a more diverse group than those who now do most outreach, they help the astronomy community present a more multicultural and gender-balanced face to the public, enabling underserved groups to see themselves as scientists. Ambassadors are given a library of outreach activities and materials, including many developed by cooperating organizations such as the ASP, plus some that have been created by Andrew Fraknoi specifically for this program.

An Update on the AAS Astronomy Ambassadors Program

Science.gov (United States)

Fienberg, Richard T.; Gurton, S.; Fraknoi, A.; Prather, E. E.; Hurst, A.; Schatz, D. L.

2013-06-01

The American Astronomical Society, partnering with organizations active in science education and public outreach (EPO), has launched a series of professional-development workshops and a community of practice designed to help improve early-career astronomers’ ability to effectively communicate with students and the public. Called Astronomy Ambassadors, the program provides mentoring and training experiences for young astronomers, from advanced undergraduates to beginning faculty; it also provides access to resources and a network of contacts within the astronomy EPO community. By learning how to implement effective education and outreach strategies, Astronomy Ambassadors become better teachers, better presenters at meetings, and better representatives of our science to the public and to government. And because young astronomers are a more diverse group than those who currently do the majority of outreach, they help the astronomical community present a more multicultural and gender-balanced face to the public, enabling members of underserved groups to see themselves as scientists. Ambassadors are provided with a large library of outreach activities and materials that are suitable for a range of venues and audiences and that will grow with time. For much of this library we are using resources developed by organizations such as the Astronomical Society of the Pacific, the Pacific Science Center, and the Center for Astronomy Education for other outreach programs, though some resources have been created by one of us (AF) specifically for this program. The first Astronomy Ambassadors workshop was held at the 221st meeting of the AAS in January 2013 and served 30 young astronomers chosen from more than 75 applicants. Incorporating feedback from workshop participants and lessons learned from the reports they’ve submitted after conducting their own outreach events, we are now planning the second annual workshop to be held 4-5 January 2014 at the 223rd AAS meeting in

Communication dated 19 January 2009 received from the Resident Representative of the Kingdom of Saudi Arabia on behalf of the Council of Ambassadors of Arab States Members of the Agency

International Nuclear Information System (INIS)

2009-01-01

The Director General has received a communication dated 19 January 2009 from the Resident Representative of the Kingdom of Saudi Arabia in Vienna on behalf of the Council of Ambassadors of Arab States Members of the Agency. The communication, as requested therein, is circulated herewith for information of all Member States

SOFIA's Airborne Astronomy Ambassadors: An External Evaluation of Cycle 1

Science.gov (United States)

Phillips, Michelle

2015-01-01

The Stratospheric Observatory for Infrared Astronomy (SOFIA) represents a partnership between NASA and the German Aerospace Center (DLR). The observatory itself is a Boeing 747 SP that has been modified to serve as the world's largest airborne research observatory. The SOFIA Airborne Astronomy Ambassadors (AAA) program is a component of SOFIA's…

29 November 2013 - U. Humphrey Orjiako Nigerian Ambassador Extraordinary and Plenipotentiary Permanent Mission to the United Nations Office and other international organisations in Geneva signing the Guest Book with Head of International Relations R. Voss, visiting the LHC tunnel at Point 2 and the ALICE cavern with ALICE Collaboration Deputy Spokesperson Y. Schutz.

CERN Multimedia

Noemi Caraban

2013-01-01

29 November 2013 - U. Humphrey Orjiako Nigerian Ambassador Extraordinary and Plenipotentiary Permanent Mission to the United Nations Office and other international organisations in Geneva signing the Guest Book with Head of International Relations R. Voss, visiting the LHC tunnel at Point 2 and the ALICE cavern with ALICE Collaboration Deputy Spokesperson Y. Schutz.

24 April 2012 - Chinese Extraordinary and Plenipotentiary Ambassador, Permanent Representative of the People's Republic of China to the United Nations Office at Geneva L. Zhenmin signing the guest book with CERN Director-General R. Heuer

CERN Multimedia

Maximilien Brice

2012-01-01

CERN-HI-1204089 tirage 15: AMS Collaboration Spokesperson S. Ting, CERN Director-General R. Heuer and Ambassador L. Zhenmin; CERN-HI-1204089 16to the end: in the LHC tunnel at POint 5 with Adviser T. Kurtyka and CMS experimental cavern with Collaboration Spokesperson J. Incandela.

10th February 2011-Ambassador Permanent Representative of the Republic of Ecuador to the United Nations H.E. Mr Mauricio Montalvo visiting CMS cavern with Head of International Relations F. Pauss

CERN Multimedia

Maximilien Brice

2011-01-01

Photo 1,9-50:the delegation visiting the CMS cavern Photo 2-8:visiting CMS Control room Photo 51:V. Aguilar,First Secretary-G. Tonelli,CMS Collaboration Spokesperson-M. Montalvo-L. Sulak,CMS Collaboration-M. del Carmen Vivar,Third Secretary-N. Mora,Personal Assistant of Ambassador-B. Jones,Information Technology Department, EU Projects-L. Vayas,Counsellor-F. Pauss-J. Carlos Sánchez,First Secretary-J. Salicio,Adviser for Ecuador Photo 52-59:M.Montalvo signing the Guest Book with F. Pauss

Holistic implementation of knowledge of the marketing ambassadors

Directory of Open Access Journals (Sweden)

Rakić Beba

2014-01-01

Full Text Available Purpose - The paper emphasizes the role of marketing knowledge in development of countries, organizations, schools and universities. The purpose is a research on the power of knowledge of the marketing ambassadors and proposal of a model for holistic implementation of knowledge of the marketing ambassadors. Methodology - Using a face-to-face questionnaire interview, the study was conducted on a sample of 30 marketing managers, 10 employees in government, 10 professors and 10 students in doctoral studies in Serbia. Findings - The marketing ambassadors - professors, students, practitioners, government, ministers and all employees in the field of marketing, with their marketing knowledge and skills, can contribute to the development of schools, universities, organizations and countries. Practical implications - There is a need to create, exchange and implement marketing knowledge on all levels - starting from schools and universities, through organisations, all the way to the ministries of the government. The marketing ambassadors, on the basis of common activities (e.g. projects can contribute to the creation, implementation and exchange of marketing knowledge, to the positive results on certain levels and to country development. Originality/value - The paper promotes holistic approach to creation and exchange of knowledge.

Teen Ambassador Leadership Kit (TALK

Directory of Open Access Journals (Sweden)

Donna R. Gillespie

2012-12-01

Full Text Available Teen Ambassador Leadership Kit, (TALK, is an annual weekend retreat designed for teens interested in promoting and marketing 4-H in their communities. TALK organizers felt teens would benefit from an intensive weekend retreat focused on communication. TALK produces a network of educated and excited 4-H teens that are available to help with 4-H promotion and marketing. Participants arrive on Friday evening for team building activities, on Saturday they participate in one of the workshops offered and on Sunday morning each workshop group has the opportunity to share their completed projects and what they learned. At the conclusion of the retreat, teens are designated "County 4-H Ambassadors" and certificates of completion, professional business cards and polo shirts are presented. The TALK teen participants return home to share what they learned with their local county 4-H staff and help promote and market 4-H in their communities.

24 June 2014 - Latin America Ambassadors to Switzerland visiting the LHC tunnel at Point 1 with Beams Department R. A. Fernandez

CERN Multimedia

Egli, Laurent

2014-01-01

Visitors present in random order: Ambassador Antonio Gustavo Trombetta (Argentina) ; Ambassador Igor Kipman (Brasil) ; Ambassador Beatriz Londoño Soto (Colombia) ; Ambassador Isabel Montero de la Cámara (Costa Rica) ; Ambassador María del Pilar Fernandez Otero (Cuba) ; Ambassador Jorge Castro-Valle Kuehne (México) ; Researcher Luis Roberto Flores Castillo (México) ; Chargé d’affaires Esteban Paez Gonzalez (Paraguay) ; Ambassador Luis Juan Chuquihuara Chil (Perú) ; Ambassador Cesar Osvelio Méndez (Venezuela)

Signature for a partership between CERN and Israel - His Excellency Mr Itzhak Levanon, Ambassador, Permanent Representative of Israel to the Unite Nations Office and specialized institutions in Geneva and Mr Robert Aymar, CERN Director General

CERN Multimedia

Maximilien Brice

2004-01-01

On 29 November 2004, the Israeli ambassador to the United Nations Office at Geneva, Itzhak Levanon, and CERN's director-general, Robert Aymar, signed a new protocol to the Co-operation Agreement between the government of Israel and CERN. This protocol covers a substantial increase in the Israeli contribution to CERN's Large Hadron Collider (LHC) Project. Israeli scientists have been participating in CERN's scientific activities since 1960, and in 1992 Israel became the first non-member state to make regular financial contributions to CERN's budget.

Visit of the Austrian Ambassador

CERN Multimedia

Patrice Loïez

2002-01-01

The Austrian Ambassador Wolfgang Petritsch (light raincoat) learns about superconducting magnets at the LHC magnet test facility in building SM18 during a visit to CERN. The blue pipe-like structure in the left background is String 2: the 120-m long full-scale model of an LHC cell, which is used to test LHC systems.

CERN’s 60th anniversary - Group Photo

CERN Multimedia

Photo, Team

2014-01-01

29th September 2014 CERN 60th anniversary From left to right 1st row Swiss State Secretary for Education, Research and Innovation M. Dell'Ambrogio Finnish Secretary of State, Ministry of Foreign Affairs P. Stenlund Slovak Minister for Education, Science, Research and Sport P. Pellegrini German Federal Minister for Education and Research J. Wanka CERN Council President A. Zalewska United Kingdom of Great Britain and Northern Ireland HRH The Duke of York CERN Director-General R. Heuer Portuguese Minister for Education and Science N. Crato Italian Minister for Education, University and Research S. Giannini Bulgarian associate professor, interim Minister for Education and Science R. Kolarova Dutch Director-General of Higher and Vocational Education, Science and Emancipation, Ministry of Education, Culture and Science H. Schutte French Permanent Representative to the UNOG, Ambassador N. Niemtchinow 2nd row Austrian Permanent Representative to the UNOG, Ambassador T. Hajnoczi Belgian Permanent Representative to the...

His Excellency Mr Farukh Amil

CERN Multimedia

hugho, Chemli

2017-01-01

His Excellency Mr Farukh Amil Ambassador Extraordinary and Plenipotentiary Permanent Representative of the Islamic Republic of Pakistan to the United Nations Office and other international organisations in Geneva

A Status Report on the AAS Astronomy Ambassadors Program

Science.gov (United States)

Fienberg, Richard Tresch; Fraknoi, Andrew; Gurton, Suzanne; Hurst, Anna; Schatz, Dennis L.

2014-06-01

The American Astronomical Society, in partnership with the Astronomical Society of the Pacific (ASP), has launched a series of professional-development workshops and a community of practice designed to improve early-career astronomers’ ability to communicate effectively with students and the public. Called AAS Astronomy Ambassadors, the program provides training and mentoring for young astronomers, from advanced undergraduates to beginning faculty; it also provides them access to resources and a network of contacts within the astronomy education and public outreach (EPO) community. Ambassadors are provided with a library of outreach activities and resource materials suitable for a range of venues and audiences. For much of this library we are using resources developed by organizations such as the ASP, the Pacific Science Center, and the Center for Astronomy Education for other outreach programs, though some resources have been created by one of us (AF) specifically for this program. After a period of evaluation and revision, the program’s “Menu of Outreach Opportunities for Science Education” (MOOSE) is now posted on the AAS website at http://aas.org/outreach/moose-menu-outreach-opportunities-science-education.The first two Astronomy Ambassadors workshops were held at AAS meetings in January 2013 and January 2014; each served 30 young astronomers chosen from about twice that many applicants. Web-based follow-up activities are being provided through a website at the ASP designed to keep cohorts of educators trained in their programs in touch with one another. The AAS is exploring ways to fund additional workshops at future winter meetings; suggestions are most welcome. Meanwhile, the Astronomy Ambassadors trained to date have logged more than 150 outreach events, reaching many thousands of children and adults across the U.S. and Canada.

CERN visit of His Excellency Mr.Kinga Singye / Bhutan

CERN Multimedia

Hoch, Michael

2016-01-01

CERN visit of His Excellency Mr Kinga Singye Ambassador Extraordinary and Plenipotentiary Permanent Representative of the Kingdom of Bhutan to the United Nations Office and other international organisations in Geneva

16th September 2011 - Permanent Representative of Israel to the United Nations Office Ambassador A.Leshno-Yaar signing the Agreement concerning the Granting of the Status of Associate Membership as the Pre-stage to Membership at CERN with CERN Director-General R. Heuer.

CERN Multimedia

Maximilien Brice

2011-01-01

Standing from left to right: ATLAS Collaboration G. Mikenberg, Israel Delegate to CERN Council E. Rabinovici, CERN Director-General R. Heuer, Director for Administration and General Infrastructure S. Lettow, Ambassador to the UN A. Leshno-Yaar, CERN Legal COunsel E. Groniger-Voss, CERN Council President M. Spiro, Director for Research and Scientific Computing S. Bertolucci, Director for Accelerators and Technology S. Myers and Head of International Relations, F. Pauss.

Young "Science Ambassadors" Raise the Profile of Science

Science.gov (United States)

Ridley, Katie

2014-01-01

Katie Ridley, science coordinator at St. Gregory's Catholic Primary School, Liverpool, UK, states that the inspiration for "science ambassadors" came after embarking on the Primary Science Quality Mark programme at their school. Ridley realized that science was just not recognised as such by the children, they talked about scientific…

115-year-old society knows how to reach young scientists: ASM Young Ambassador Program.

Science.gov (United States)

Karczewska-Golec, Joanna

2015-12-25

With around 40,000 members in more than 150 countries, American Society for Microbiology (ASM) faces the challenge of meeting very diverse needs of its increasingly international members base. The newly launched ASM Young Ambassador Program seeks to aid the Society in this effort. Equipped with ASM conceptual support and financing, Young Ambassadors (YAs) design and pursue country-tailored approaches to strengthen the Society's ties with local microbiological communities. In a trans-national setting, the active presence of YAs at important scientific events, such as 16th European Congress on Biotechnology, forges new interactions between ASM and sister societies. The paper presents an overview of the Young Ambassadors-driven initiatives at both global and country levels, and explores the topic of how early-career scientists can contribute to science diplomacy and international relations. Copyright © 2014 Elsevier B.V. All rights reserved.

Jean-Marie Dufour receives the Legion of Honour

CERN Multimedia

2001-01-01

French Ambassador Philippe Petit (left) presents the cross of Knight of the Légion d'Honneur to Jean-Marie Dufour. On Friday 22 June, Jean-Marie Dufour, Head of CERN's Legal Service, was made Knight of the Legion of Honour by Ambassador Philippe Petit, at a ceremony held at the Permanent Mission of France in Geneva. Ambassador Petit is Permanent Representative of France at the United Nations and French delegate at CERN. He was awarded the decoration in recognition of his services. He has played an active part in all the great stages of CERN's development, in fact, ranging from its scientific programmes, to its establishment in its Host States, Switzerland and France, and its opening up to the wider world. The ceremony took place in the presence of Professor Luciano Maiani. The award is an honour to CERN, and the Organization takes this opportunity to convey its friendliest congratulations to Jean-Marie Dufour, a committed European.

Visit of Her Royal Highness Princess Maha Chakri Sirindhorn, Thailand

CERN Multimedia

Patrice Loïez

2000-01-01

Her Royal Highness Princess Maha Chakri Sirindhorn of Thailand (left) visiting DELPHI with Spokesman, Tiziano Camporesi, and Prapol Assavavirulhakarn, Pattaratorn Chirapravati, Claude Détraz, CERN Director for Fixed Target andFuture Programmes and Richard Breedon, University of California. No. 05: Princess Maha Chakri Sirindhorn and Daniel Treille, former spokesman of Delphi. No. 31: in Delphi experiment. No. 35: H.E. Mr. Virasakdi Futrakul, Ambassador, Permanent Representative ofThailand, Geneva with H.E. Dr. Ronarong Nopakun, Ambassador of the Thai Embassy in Bern

PENGARUH GITA GUTAWA SEBAGAI BRAND AMBASSADOR POND’S DALAM MEMPENGARUHI KEPUTUSAN PEMBELIAN (STUDI KASUS PADA MAHASISWI UNIVERSITAS TELKOM JURUSAN D3 MANAJEMEN PEMASARAN

Directory of Open Access Journals (Sweden)

Rennyta Yusiana

2016-03-01

Full Text Available Abstract - Promotion is one aspect that is important in marketing. Consumers are currently viewing a video or advertisement before buying a product. Apart from the functional or realistic appeal is also expected to attract emotionally advertising by using brand ambassadors. The purpose of this study was to determine whether there is a relationship characteristics Pond's brand ambassador (Gita Gutawa with consumer purchasing decisions. The population of this research is a student D3 Marketing Management totaling 178 Telkom University student. By using Slovin formula is obtained as a sample of 123 female students. Engineering samples are used are non-probability sampling technique purposive sampling types. The method used is a simple linear regression. Data collection techniques were performed using questionnaires distributed to the respondents. The results showed that the variable Gita Gutawa as brand ambassador and variable consumer purchasing decisions can be approved by the continuum line of 88.27% and 86.93% . Influence Gita Gutawa as brand ambassador in influencing purchasing decisions amounted to 32%.   Keywords: Advertising, Brand Ambassador, Purchase Decision.   Abstrak - Promosi merupakan salah satu aspek yang penting dalam sebuah pemasaran. Para konsumen saat ini melihat sebuah video atau iklan sebelum membeli suatu produk. Selain dari daya tarik fungsional atau realistik diharapkan pula iklan dapat menarik secara emosional dengan menggunakan brand ambassador. Tujuan dari penelitian ini adalah untuk mengetahui apakah ada hubungan karakteristik brand ambassador Pond’s (Gita Gutawa dengan keputusan pembelian konsumen. Populasi penelitian ini adalah mahasiswi D3 Manajemen Pemasaran Universitas Telkom yang berumlah 178 mahasiswi. Dengan menggunakan rumus Slovin didapatkan sebanyak 123 mahasiswi yang menjadi sampel. Teknik sampel yang digunakan adalah teknik non probability sampling jenis purposive sampling. Metode penelitian yang

CSU Digital Ambassadors: An Empowering and Impactful Faculty Learning Community

Science.gov (United States)

Soodjinda, Daniel; Parker, Jessica K.; Ross, Donna L.; Meyer, Elizabeth J.

2014-01-01

This article chronicles the work of the California State University Digital Ambassador Program (DA), a Faculty Learning Community (FLC), which brought together 13 faculty members across the state to create ongoing, targeted spaces of support for colleagues and educational partners to learn about innovative technological and pedagogical practices…

WorldWide Telescope Ambassadors, a Year 3 Update

Science.gov (United States)

Udomprasert, Patricia S.; Goodman, A. A.; Wong, C.

2013-01-01

The WorldWide Telescope Ambassadors (WWTA) Program has a track record of inspiring middle school students and getting them excited about science. The WorldWide Telescope (WWT) is a stunningly beautiful and freely available data visualization environment developed by Microsoft Research in collaboration with professional astronomers. Trained volunteer Ambassadors show teachers and students how to use WWT in their classrooms to explore and learn about our Universe. Our initial study has shown that WWT increases student understanding of astrophysical concepts and interest in astronomy and science. As an example of how excited students feel about learning astronomy with WWT, one middle school boy exclaimed, “This is way cooler than Call of Duty!” Our vision is to capitalize on the demonstrated inspirational and educational potential of WWT to increase the number of students who express interest in STEM fields. In this oral presentation, we provide a status update on the WWTA program, including ongoing results from our work with over 700 middle school students to date, and preliminary results from a new NSF-funded study comparing learning and interest gains for students studying Moon phases with WWT vs with the 2-dimensional simulator activity that accompanies their textbook. More information is available at wwtambassadors.org

Pengaruh Brand Ambassador Terhadap International Brand Image Serta Dampaknya Terhadap Keputusan Pembelian (Studi Pada Pengguna Smartphone Samsung)

OpenAIRE

Magdalena, Puspita Astria

2015-01-01

The purpose of this research is to understanding the impact of Brand Ambassador on International Brand Image and Decision Buying. In this research, exogenous variable used as Brand Ambassador whereas International Brand Image and Decision Buying as endogenous variable. This research is quantitative exploratory study with involved 133 correspondents from three countries such as Indonesia, Malaysia, and India which is 41 correspondents are India, 45 correspondents are Indonesian, and 47 corresp...

InsightSTEM Campus Ambassadors: Welcoming, Including, and Supporting All in STEM Careers Worldwide

Science.gov (United States)

Noel-Storr, J.

2016-12-01

Definitions of genders and, races, ethnicities, abilities and sexualities tend to exist on a binary scale (e.g. male/female, black/white) both for inclusiveness and evaluation of programs. This has the potential to be a schism for individuals who are choosing to enter STEM fields when if their self-identity does not fit this these predefined multi-polar templates. At InsightSTEM, in our Campus Ambassadors program (which has over 290 grassroots members in over 25 countries) we have been striving to nullify this effect... For example, on our application, we choose to not ask for any demographic data, in any spectrum, because those data make no sense on a global stage. We question that if race, gender, sexuality and ethnicity are all on a spectrum: is any program devoted to a particular group appropriate? Instead we deliver professional development to students worldwide to train them to become aware and inclusive STEM educators, involving everyone in their programs no matter what their background. We will present the ways we work with our Campus Ambassadors to create programs that, rather than focusing on particular groups, are truly inclusive, in developing their skills and empowering them to create inclusive programs worldwide for all. InsightSTEM Campus Ambassadors: Welcoming, Including, and & Supporting All in STEM Careers Worldwide

Youth Science Ambassadors: Connecting Indigenous communities with Ocean Networks Canada tools to inspire future ocean scientists and marine resource managers

Science.gov (United States)

Pelz, M.; Hoeberechts, M.; Hale, C.; McLean, M. A.

2017-12-01

This presentation describes Ocean Networks Canada's (ONC) Youth Science Ambassador Program. The Youth Science Ambassadors are a growing network of youth in Canadian coastal communities whose role is to connect ocean science, ONC data, and Indigenous knowledge. By directly employing Indigenous youth in communities in which ONC operates monitoring equipment, ONC aims to encourage wider participation and interest in ocean science and exploration. Further, the Youth Science Ambassadors act as role models and mentors to other local youth by highlighting connections between Indigenous and local knowledge and current marine science efforts. Ocean Networks Canada, an initiative of the University of Victoria, develops, operates, and maintains cabled ocean observatory systems. These include technologies developed on the world-leading NEPTUNE and VENUS observatories as well as community observatories in the Arctic and coastal British Columbia. These observatories, large and small, enable communities, users, scientists, teachers, and students to monitor real-time and historical data from the local marine environment from anywhere on the globe. Youth Science Ambassadors are part of the Learning and Engagement team whose role includes engaging Indigenous communities and schools in ocean science through ONC's K-12 Ocean Sense education program. All of the data collected by ONC are freely available over the Internet for non-profit use, including disaster planning, community-based decision making, and education. The Youth Science Ambassadors support collaboration with Indigenous communities and schools by facilitating educational programming, encouraging participation in ocean data collection and analysis, and fostering interest in ocean science. In addition, the Youth Science Ambassadors support community collaboration in decision-making for instrument deployment locations and identify ways in which ONC can help to address any areas of concern raised by the community. This

Touristic destination ambassadors, case analysis and conceptualization. How to better understand and use brand ambassadors in cognitive, affective and experiential approaches

OpenAIRE

de Diesbach, Pablo Brice

2012-01-01

The purpose – We propose to capitalize on recent research on tourism marketing, destination choice, but also and mainly on conceptual reflexions and research on emotional and symbolical brand relationship . We try to understand how destinations could communicate, using destination ambassadors; in order to better attract travellers. Methodology – this is a theoretical article presenting key concepts and their relevance to tourism marketing. We present the key concepts and analyse cases or real...

WorldWide Telescope Ambassadors: A Year 3 Update

OpenAIRE

Udomprasert, Patricia S; Goodman, Alyssa A.; Wong, Curtis

2013-01-01

We give a brief overview of some key features of WorldWide Telescope and its Ambassadors Program, and we describe two goals for expanding the program in the coming year: scaling up training efforts; and developing “plug and play” Visualization Lab modules that teach key Earth and Space Science concepts to students while emphasizing important scientific processes and skills. We discuss several different ways that members of the astronomy education and outreach community can incorporate WWT-bas...

8 February 2017 - Sri Lanka Hon. Minister of Science, Technology and Research A. D. S. Premajayantha signing the International Cooperation Agreement concerning Scientific and Technical Cooperation in High-Energy Physics 2017 with CERN Director for International Relations C. Warakaulle.

CERN Multimedia

Brice, Maximilien

2017-01-01

Were present: Hon. A. D. Susil Premajayantha, Minister of Science, Technology and Research, Democratic Socialist Republic of Sri Lanka; H.E. Mr Ravinatha Aryasinha, Ambassador, Permanent Representative of Sri Lanka to the UN in Geneva; Mrs Samantha Jayasuriya, Deputy Permanent Representative, Permanent Mission of Sri Lanka to the UN in Geneva; Ms Shashika Somaratne, Counsellor, Permanent Mission of Sri Lanka to the UN in Geneva; Mr Gihan Indragupta, Member of Sri Lanka Foreign service and Head of the G15 Secretariat; Ms Dilini Gunasekera, Second Secretary, Permanent Mission of Sri Lanka to the UN in Geneva; Mr Prageeth Herath , Supporting staff, Permanent Mission of Sri Lanka. CERN: Mr Andrzej Charkiewicz, CMS Ressources Manager; Ms Sofia Intoudi, Legal Officer; Dr Rüdiger Voss, Senior Adviser, International Relations; Ms Charlotte Warakaulle, Director for International Relations

From ivory tower to prison watchtower: The STEM Ambassador Program promotes exchange outside of traditional venues

Science.gov (United States)

Nadkarni, N.; Weber, C.

2017-12-01

Scientists can be effective in engaging the public, due to their deep content knowledge and passion for their research. However, most training programs prepare scientists to communicate with public groups who seek out informal science education (ISE) activities at science centers and zoos, but not all Americans regularly participate in ISE activities. Opportunities for scientists to exchange information with those who may not seek out science but who hold the potential to contribute novel ideas and generate political support for our discipline can enhance the scientific enterprise. With support of the National Science Foundation (NSF), we created the "STEM Ambassador Program" (STEMAP), a research and public engagement project that aims to bridge science and society by training scientists to engage audiences outside of traditional venues. Activities are based on commonalities between the scientist's research interests and/or personal characteristics, and the interests, professions, and recreational pursuits of community groups. Scientists are encouraged to work with underserved communities (e.g., senior citizens), communities facing barriers to science learning (e.g., incarcerated men and women), and non-academic stakeholders in scientific research (e.g., decision-makers). STEMAP training is derived from three NSF-funded ISE models: Portal to the Public, the Research Ambassador Program, and Design Thinking. In 2016-2017, two cohorts of 20 scientists each, representing 15 departments at the University of Utah, received training. Examples of engagement activities included: An engineer presented his work to develop air quality monitoring devices to a local government council, and invited members to participate in his understanding of regional air quality. A microbiologist provided a microscope view of the microbes that are involved in fermentation with classes at a local cooking school. An urban planning researcher met with inmates in a horticulture training program at

Mr. Eduard Zeman, Minister of Education, Youth and Sport, Czech Republic

CERN Multimedia

Patrice Loïez

2001-01-01

Mr Eduard Zeman (third from left), Minister of Education, Youth and Sport, Czech Republic, visiting CERN's permanent exhibition, Microcosm, with (from left to right) Dr Rupert Leitner, ATLAS Tile Calorimetry Project Leader; Mr P. Cink, Ministry of Education, Youth and Sport; Dr Ivan Lehraus, Committee for Collaboration of the Czech Republic with CERN; and H.E. Mr Milan Hovorka, Ambassador, permanent representative of the Czech Republic to the United Nations in Geneva.

Evaluation of an Online Youth Ambassador Program to Promote Mental Health

Science.gov (United States)

Beamish, Nicola; Cannan, Philippa; Fujiyama, Hakuei; Matthews, Allison; Spiranovic, Caroline; Briggs, Kate; Kirkby, Kenneth; Mobsby, Caroline; Daniels, Brett

2011-01-01

This article presents results of an evaluation of an online Youth Ambassador (YA) program designed to promote internet resources for mental health in an adolescent population. Results suggest that an online YA program delivered in school is useful in improving mental health awareness for workshop participants. (Contains 1 table.)

The Big Cheese: Jon Scieszka, National Ambassador for Young People's Literature

Science.gov (United States)

Minkel, Walter

2008-01-01

This article presents an interview with Jon Scieszka, author of "The Stinky Cheese Man and Other Fairly Stupid Tales" who is tapped by the "Children's Book Council" and the Library of Congress's "Center for the Book" as the first National Ambassador for Young People's Literature. A former grade-school teacher, Scieszka is also the creator of Guys…

NASA Airborne Astronomy Ambassadors (AAA)

Science.gov (United States)

Backman, D. E.; Harman, P. K.; Clark, C.

2016-12-01

NASA's Airborne Astronomy Ambassadors (AAA) is a three-part professional development (PD) program for high school physics and astronomy teachers. The AAA experience consists of: (1) blended-learning professional development composed of webinars, asynchronous content learning, and a series of hands-on workshops (2) a STEM immersion experience at NASA Armstrong Flight Research Center's B703 science research aircraft facility in Palmdale, California, and (3) ongoing participation in the AAA community of practice (CoP) connecting participants with astrophysics and planetary science Subject Matter Experts (SMEs). The SETI Institute (SI) is partnering with school districts in Santa Clara and Los Angeles Counties during the AAA program's "incubation" period, calendar years 2016 through 2018. AAAs will be selected by the school districts based on criteria developed during spring 2016 focus group meetings led by the program's external evaluator, WestEd.. Teachers with 3+ years teaching experience who are assigned to teach at least 2 sections in any combination of the high school courses Physics (non-AP), Physics of the Universe (California integrated model), Astronomy, or Earth & Space Sciences are eligible. Partner districts will select at least 48 eligible applicants with SI oversight. WestEd will randomly assign selected AAAs to group A or group B. Group A will complete PD in January - June of 2017 and then participate in SOFIA science flights during fall 2017 (SOFIA Cycle 5). Group B will act as a control during the 2017-18 school year. Group B will then complete PD in January - June of 2018 and participate in SOFIA science flights in fall 2018 (Cycle 6). Under the current plan, opportunities for additional districts to seek AAA partnerships with SI will be offered in 2018 or 2019. A nominal two-week AAA curriculum component will be developed by SI for classroom delivery that will be aligned with selected California Draft Science Framework Disciplinary Core Ideas

KUSPACE: Embedding Science Technology and Mathematics Ambassador Activities in the Undergradiuate Engineering Curriculum

Science.gov (United States)

Welch, C.; Osborne, B.

The UK national STEM Ambassadors programme provides inspiring role models for school students in science, technology, engineering, mathematics (STEM) subjects. STEMNET, the national body responsible for STEM Ambassa- dors aims to provide more than 27,000 STEM Ambassadors nationwide by the end of 2011. This paper reports on a project at Kingston University to embed STEM Ambassador training and activity in Year 2 of the undergraduate Aerospace Engineering, Astronautics and Space Technology degree. The project, known as KUSPACE (Kingston University Students Providing Amazing Classroom Experiences), was conceived to develop students' communication, planning and presentation skills and build links between different cohort years, while providing a valuable contribution to local primary schools' STEM programmes and simultaneously raising the public engagement profile of the university. This paper describes the pedagogical conception of the KUSPACE, its implementation in the curriculum, the delivery of it in the university and schools and its effect on the undergraduate students, as well as identifying good practice and drawing attention to lessons learned.STEMNET (www.stemnet.org) is the UK's Science, Technol- ogy, Engineering and Mathematics Network. Working with a broad range of UK partners and funded by the UK govern- ment's Department for Business Innovation and Skills, STEMNET plays a significant role in ensuring that five to nineteen year olds and their teachers can experience a wide range of activities and schemes which enhance and enrich the school curriculum [1]. Covering all aspects of Science, Tech- nology, Engineering and Maths (STEM), these activities and schemes are designed both to increase STEM awareness and literacy in the young people and also to encourage more of them to undertake post-16 STEM qualifications and associated careers [2]. STEMNET operates through forty-five local con- tract holders around the UK which help the network deliver its

Marxism as permanent revolution

OpenAIRE

van Ree, E.

2013-01-01

This article argues that the 'permanent revolution' represented the dominant element in Karl Marx and Friedrich Engels' political discourse, and that it tended to overrule considerations encapsulated in 'historical materialism'. In Marx and Engels's understanding, permanent revolution did not represent a historical shortcut under exceptional circumstances, but the course revolutions in the modern era would normally take. Marx and Engels traced back the pattern to the sixteenth century. It is ...

Kingdom of Bhutan VIP visit at CERN / CMS

CERN Document Server

Hoch, Michael

2014-01-01

His Excellency Mr Yeshey Zimba Member of Parliament and His Excellency Daw Penjo Ambassador and Permanent Representative of the Kingdom of Bhutan visiting at CERN the LHC tunnel and the CMS experiment. Further guests were : Mrs Daw Zam, Mrs Thuji Zangmo, Mr. Rinchen Dorji, Mrs Dechen Wangmo, Ms Choni Ome Guided by R. Voss, Michael Hoch, Tiziano Camporesi

22 August 2014 - H.E. Ms P. Hamamoto

CERN Multimedia

Gadmer, Jean-Claude

2014-01-01

Ambassador Permanent Representative of the United States of America to the United Nations and other International Organizations in Geneva P. Hamamoto signing the Guest Book with Director-General R. Heuer and visiting the CMS cavern with CMS Collaboration Deputy Spokesperson K. Borras and visiting the LHC tunnel at point 5 with Technology Department Head J.M. Jiménez

Marxism as permanent revolution

NARCIS (Netherlands)

van Ree, E.

2013-01-01

This article argues that the 'permanent revolution' represented the dominant element in Karl Marx and Friedrich Engels' political discourse, and that it tended to overrule considerations encapsulated in 'historical materialism'. In Marx and Engels's understanding, permanent revolution did not

Translating the covenant: The behavior analyst as ambassador and translator.

Science.gov (United States)

Foxx, R M

1996-01-01

Behavior analysts should be sensitive to how others react to and interpret our language because it is inextricably related to our image. Our use of conceptual revision, with such terms as punishment, has created communicative confusion and hostility on the part of general and professional audiences we have attempted to influence. We must, therefore, adopt the role of ambassador and translator in the nonbehavioral world. A number of recommendations are offered for promoting, translating, and disseminating behavior analysis.

CERN 50th Anniversary Official Celebration : one of the high moments of the day the signing of the golden book by the national delegations

CERN Multimedia

Michel Blanc

2004-01-01

Russian Federation, Minister of Education and Science (0410050_01.jpg, 0410050_02.jpg) United States of America (0410050_03.jpg, 0410050_04.jpg, 0410050_05.jpg) Israel, Ambassador, Permanent representative to the UN and other International Organisations in Geneva (0410050_06.jpg, 0410050_07.jpg) Japan, Advisor to the Minister of MEXT and Former Minister of MEXT (0410050_08.jpg, 0410050_09.jpg) Belgium, Ambassador in Geneva (0410050_11.jpg, 0410050_12.jpg)Greece, H.E. Mr. Dimitris Avramopoulos, Minister of Tourism (0410050_14.jpg, 0410050_15.jpg)Portugal, M. Pedro de Sampaio Nunes, Secretary of State for Science and Innovation (0410050_19.jpg)Finland, H. E. Mr Mauri Pekkarinen, Minister of Trade and Industry (0410050_20.jpg)

Robert Aymar receives one of the highest Finnish distinctions

CERN Multimedia

2008-01-01

On 9 December 2008 Robert Aymar, CERN Director-General, was awarded the decoration of Commander, first class, of the Order of the Lion of Finland by the President of the Republic of Finland. This decoration, one of the highest of Finland, was presented in a ceremony by the Ambassador Hannu Himanen, Permanent Representative of Finland to the UN and other international organisations in Geneva. Robert Aymar was honoured for his service to CERN, the LHC, his role in the cooperation between Finland and CERN, as well as his contribution to science in general. In his speech the ambassador underlined CERN’s efforts in the field of education, mentioning the High school teachers programme.

The Airborne Astronomy Ambassadors (AAA) Program and NASA Astrophysics Connections

Science.gov (United States)

Backman, Dana Edward; Clark, Coral; Harman, Pamela

2018-01-01

The NASA Airborne Astronomy Ambassadors (AAA) program is a three-part professional development (PD) experience for high school physics, astronomy, and earth science teachers. AAA PD consists of: (1) blended learning via webinars, asynchronous content delivery, and in-person workshops, (2) a STEM immersion experience at NASA Armstrong’s B703 science research aircraft facility in Palmdale, California, including interactions with NASA astrophysics & planetary science Subject Matter Experts (SMEs) during science flights on SOFIA, and (3) continuing post-flight opportunities for teacher & student connections with SMEs.

PENGARUH GITA GUTAWA SEBAGAI BRAND AMBASSADOR POND’S DALAM MEMPENGARUHI KEPUTUSAN PEMBELIAN (STUDI KASUS PADA MAHASISWI UNIVERSITAS TELKOM JURUSAN D3 MANAJEMEN PEMASARAN)

OpenAIRE

Rennyta Yusiana; Rifaatul Maulida

2016-01-01

Abstract - Promotion is one aspect that is important in marketing. Consumers are currently viewing a video or advertisement before buying a product. Apart from the functional or realistic appeal is also expected to attract emotionally advertising by using brand ambassadors. The purpose of this study was to determine whether there is a relationship characteristics Pond's brand ambassador (Gita Gutawa) with consumer purchasing decisions. The population of this research is a student D3 Marketing...

NASA Climate Days: Promoting Climate Literacy One Ambassador and One Event at a Time

Science.gov (United States)

Weir, H. M.; Lewis, P. M.; Chambers, L. H.; Millham, R. A.; Richardson, A.

2012-12-01

With so many informal outreach and education venues across the world, leveraging them for climate education allows vast amounts of information to be translated to the public in a familiar setting through trusted local sources. One of the challenges is the development of an effective process for training informal educators and providing them with adequate support materials. The 'NASA Climate Day Kit', and its related training strategy for Earth Ambassadors, is designed to address some of these issues. The purpose of the NASA Climate Day project is to collect existing NASA climate education materials, assemble a cadre of informal educators, and provide professional development on the subject of climate change. This training is accomplished through a series of exercises, games, science talks and place-based training. After their training and immersion in climate-related content, participants develop and implement a climate event at their local informal education venue. Throughout their training the Earth Ambassadors are exposed to a wide array of climate related exercises and background content. Some of these include one-on-one science content talks with NASA scientists who study climate on a daily basis. This allows the Ambassador to have direct access to new cutting edge data and information. To complement the science talks, participants explore activities and games that can engage all ages at their climate event. During their training, they also explore the 'Climate Day Kit'. This Kit is an assemblage of climate-related materials created by various NASA groups. Key components of this Kit include data visualizations, articles, electronic reference material, science talks, NASA Education and Public Outreach (E/PO) climate materials, and examples of Climate Day events that have been conducted in the past. As an on-going resource and to use for their own climate event, each group of Earth Ambassadors has access to a dynamic website that hosts all of the science

Communication Ambassadors-an Australian Social Media Initiative to Develop Communication Skills in Early Career Scientists.

Science.gov (United States)

Wang, Jack T H; Power, Cheryl J; Kahler, Charlene M; Lyras, Dena; Young, Paul R; Iredell, Jonathan; Robins-Browne, Roy

2018-01-01

Science communication is a skill set to be developed through ongoing interactions with different stakeholders across a variety of platforms. Opportunities to engage the general public are typically reserved for senior scientists, but the use of social media in science communication allows all scientists to instantaneously disseminate their findings and interact with online users. The Communication Ambassador program is a social media initiative launched by the Australian Society for Microbiology to expand the online presence and science communication portfolios of early-career scientists. Through their participation in the program, a rotating roster of Australian microbiologists have broadened the online reach of the Society's social media channels as well as their own professional networks by attending and live-tweeting microbiology events throughout the year. We present the Communication Ambassador program as a case study of coordinated social media activity in science communication to the general public, and describe the potential for its applications in science education and training.

Contributions of Diesel Truck Emissions to Indoor Elemental Carbon Concentrations in Home Proximate to Ambassador Bridge

Science.gov (United States)

Ambassador Bridge, connecting Detroit, Michigan and Windsor, Ontario, is the busiest international commercial vehicle crossing in North America, with a large percentage of heavy duty diesel trucks. This study seeks to examine the contribution of diesel truck traffic across Ambass...

Object permanence in lemurs.

Science.gov (United States)

Deppe, Anja M; Wright, Patricia C; Szelistowski, William A

2009-03-01

Object permanence, the ability to mentally represent objects that have disappeared from view, should be advantageous to animals in their interaction with the natural world. The objective of this study was to examine whether lemurs possess object permanence. Thirteen adult subjects representing four species of diurnal lemur (Eulemur fulvus rufus, Eulemur mongoz, Lemur catta and Hapalemur griseus) were presented with seven standard Piagetian visible and invisible object displacement tests, plus one single visible test where the subject had to wait predetermined times before allowed to search, and two invisible tests where each hiding place was made visually unique. In all visible tests lemurs were able to find an object that had been in clear view before being hidden. However, when lemurs were not allowed to search for up to 25-s, performance declined with increasing time-delay. Subjects did not outperform chance on any invisible displacements regardless of whether hiding places were visually uniform or unique, therefore the upper limit of object permanence observed was Stage 5b. Lemur species in this study eat stationary foods and are not subject to stalking predators, thus Stage 5 object permanence is probably sufficient to solve most problems encountered in the wild.

CERN 50th Anniversary Official Celebration : one of the high moments of the day the signing of the golden book by the national delegations

CERN Multimedia

Patrice Loiez

2004-01-01

Russian Federation, Minister of Education and Science (0410049_03.jpg, 0410049_04.jpg) United States of America (0410049_05.jpg, 0410049_07.jpg) Israel, Ambassador, Permanent representative to the UN and other International Organisations in Geneva (0410049_09.jpg, 0410049_11.jpg) Japan, Advisor to the Minister of MEXT and Former Minister of MEXT (0410049_12.jpg, 0410049_15.jpg) Belgium, Ambassador in Geneva (0410049_16.jpg, 0410049_19.jpg)Greece, H.E. Mr. Dimitris Avramopoulos, Minister of Tourism (0410049_20.jpg, 0410049_22.jpg)Portugal, M. Pedro de Sampaio Nunes, Secretary of State for Science and Innovation (0410049_28.jpg, 0410049_30.jpg)Finland, H. E. Mr Mauri Pekkarinen, Minister of Trade and Industry (0410049_32.jpg, 0410049_33.jpg)

19th July 2010 - Italian Senators and Deputies on the occasion of the Third World Conference of Speakers of Parliament, visiting CMS control room with CERN Director-General R. Heuer.

CERN Document Server

Jean-Claude Gadmer

2010-01-01

CERN-HI-1007208 01: In the CMS surafce building 3578, from left to right: ALICE Collaboration Spokesperson elect P. Giubellino, Guest Professor and Former Italian Senator G. Basini, Technology Deputy Department Head L. Rossi, Vice President House R. Buttiglione, Vice President of the Italian Senate V. Chiti,Engineering Department Head R. Saban, Permanent Representative of Italy to the UN Ambassador L. Mirachian, CMS Collaboration Spokesperson G. Tonelli, Director for Research and Computing S. Bertolucci.

Le ministre italien de la science inaugure une exposition industrielle au CERN

CERN Multimedia

CERN Press Office. Geneva

1993-01-01

On 30 November 1993 His Excellency Professor Umberto Colombo, Italy's Minister for Universities and Research opened the sixth "Italy at CERN" exhibition. The Minister was accompanied by His Excellency the Ambassador Giulio di Lorenzo Badia, Permanent Representative of Italy to the International Organizations in Geneva. CERN's Director-General, Prof. Carlo Rubbia welcomed the Minister and expressed his pleasure at the extremely wide range and high quality of the equipment on display at the exhibition.

La science rapproche les peuples

CERN Multimedia

CERN Press Office. Geneva

1999-01-01

On Monday 3 May 1999 at 5 p.m. Ambassador Vassily Sidorov, Permanent Representative of the Russian Federation to the United Nations, together with the Director General of the European Laboratory for Particle Physics (CERN*)) Prof. Luciano Maiani, and the Director of the Joint Institute for Nuclear Research (JINR**) in Dubna, Russia, Prof. Vladimir Kadyshevsky will inaugurate the exhibition "Science Bringing Nations Together" in the Pas Perdus Hall of the Palais des Nations, Geneva.

Visit of the Spanish Minister for Science and Technology

CERN Multimedia

Patrice Loïez

2002-01-01

H.E. Mr. Josep Piqué i Camps, Minister of Science and Technology, Spain, visited CERN in November. On his itinerary was a tour of the test facility for LHC magnets in building SM18. Photo 01: H.E. Mr Joaquin Pérez-Villanueva y Tovar, Ambassador and Permanent Representative of Spain to the United Nations Office in Geneva (right), with Juan Antonio Rubio, leader of Education and Technology Transfer division in building SM18.

Mr. Matan Vilnai, Israeli Minister of Science, Culture and Sport visited CERN on 20 March

CERN Multimedia

Laurent Guiraud

2000-01-01

No 17: Mr. Yuval Ne\\'eman, director of the centre for advanced studies at Tel-Aviv University, explains the standard model of physics to the Minister. No 20 : left to right, H.E. Mr. David Peleg, Ambassador and Permanent Representative of Israel to the UN, Minister Vilnai, Professor Hagit Meser Yaron, Chief Scientist at the Ministry of Science, Culture and Sport, and Mr. Nachman Shai, Director General of the Ministry with Giora Mikenberg, ATLAS and OPAL physicist

Germany at CERN

CERN Document Server

2001-01-01

The Eighth Exhibition of German Industry, "Germany at CERN" started this week and offers German companies the opportunity to establish professional contacts with CERN. From left to right in the foreground: Maximilian Metzger (BMBF), Bettinna Schöneseffen (BMBF), Karl-Heinz Kissler (SPL division leader), Horst Wenninger, and Hans Hoffman. Behind and to the right of Karl-Heinz Kissler is His Excellency Mr Walter Lewalter, Ambassador and permanent representative of Germany to the UN office in Geneva.

A Train-the-Trainer Design for Green Ambassadors in an Environmental Education Programme on Plastic Waste Recycling

Science.gov (United States)

Cheung, Yannes Tsz-Yan; Chow, Cheuk-Fai; So, Winnie Wing-Mui

2018-01-01

To educate a sustainable future, a train-the-trainer (TTT) approach was adopted to train student teachers (STs) from a teacher education institute to be green ambassadors (GAs) in an environmental education (EE) programme with the aim of promoting plastic waste recycling among primary school pupils. The design of the TTT course for the GAs not…

Goddard Space Flight Center: 1994 Maryland/GSFC Earth and Environmental Science Teacher Ambassador Program

Science.gov (United States)

Latham, James

1995-01-01

The Maryland/Goddard Space Flight Center (GSFC) Earth and Environmental Science Teacher Ambassador Program was designed to enhance classroom instruction in the Earth and environmental science programs in the secondary schools of the state of Maryland. In October 1992, more than 100 school system administrators from the 24 local Maryland school systems, the Maryland State Department of Education, and the University of Maryland met with NASA GSFC scientists and education officers to propose a cooperative state-wide secondary school science teaching enhancement initiative.

23 May 2016 - Signature of a MoU between the National Nuclear Research Center, Republic of Azerbaijan, and the ALICE Collaboration

CERN Multimedia

Bennett, Sophia Elizabeth

2016-01-01

From left to right: Head of the Nuclear Physics Department, National Nuclear Research Center A. Rustamov; Chairman, National Nuclear Research Center A. Garibov; Deputy Minister for Communication and High Technology of the Republic of Azerbaijan E. Velizadeh; CERN Director for Research and Computing E. Elsen; ALICE Collaboration Spokesperson P. Giubellino. Are also attending: Permanent Representative of the Republic of Azerbaijan to the United Nations Office and other international organizations in Geneva Ambassador V. Sadiqov and Director for International Relations C. Warakaulle.

76 FR 52266 - Safety Zone; Coast Guard Exercise, Detroit River, Ambassador Bridge to the Western Tip of Belle Isle

Science.gov (United States)

2011-08-22

... rule under Executive Order 13045, Protection of Children from Environmental Health Risks and Safety Risks. This rule is not an economically significant rule and does not create an environmental risk to... temporary safety zone in the Captain of the Port Detroit Zone on the Detroit River, from the Ambassador...

Implementation of directly observed patient hand hygiene for hospitalized patients by hand hygiene ambassadors in Hong Kong.

Science.gov (United States)

Cheng, Vincent C C; Tai, Josepha W M; Li, W S; Chau, P H; So, Simon Y C; Wong, Lisa M W; Ching, Radley H C; Ng, Modissa M L; Ho, Sara K Y; Lee, Doris W Y; Lee, W M; Wong, Sally C Y; Yuen, K Y

2016-06-01

The importance of compliance with hand hygiene by patients is increasingly recognized to prevent health care-associated infections. This descriptive study observed the effects of an education campaign, targeted to increase patients' self-initiated hand hygiene, and a hand hygiene ambassador-initiated directly observed hand hygiene program on patients' hand hygiene compliance in a university-affiliated hospital. The overall audited compliance of patients' self-initiated hand hygiene was only 37.5%, with a rate of 26.9% (112/416 episodes) before meals and medications, 27.5% (19/69 episodes) after using a urinal or bedpan, and 89.7% (87/97 episodes) after attending toilet facilities. Patients referred from a residential care home for older adults had significantly lower hand hygiene compliance (P = .007). Comparatively, the overall audited compliance of ambassador-initiated directly observed hand hygiene was 97.3% (428/440 episodes), which was significantly higher than patients' self-initiated hand hygiene via a patient education program (37.5%, 218/582 episodes, P hand hygiene can play an important role in improving compliance with hand hygiene by hospitalized patients. Copyright © 2016 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Communication Received from the Permanent Mission of Brazil regarding Certain Member States' Guidelines for the Export of Nuclear Material, Equipment and Technology

International Nuclear Information System (INIS)

2008-01-01

The Agency has received a Note Verbale from the Permanent Mission of Brazil, dated 22 March 2007, in which it requests that the Agency circulate to all Member States a letter of 12 December 2006 from the Chairman of the Nuclear Suppliers Group, Ambassador Jose Artur Denot Medeiros, to the Director General, on behalf of the Governments of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, China, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Kazakhstan, Republic of Korea, Latvia, Lithuania, Luxemburg, Malta, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Russian Federation, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, providing further information on those Governments' Guidelines for Nuclear Transfers [es

Communication Received from the Permanent Mission of Brazil regarding Certain Member States' Guidelines for the Export of Nuclear Material, Equipment and Technology

International Nuclear Information System (INIS)

2007-01-01

The Agency has received a Note Verbale from the Permanent Mission of Brazil, dated 22 March 2007, in which it requests that the Agency circulate to all Member States a letter of 12 December 2006 from the Chairman of the Nuclear Suppliers Group, Ambassador Jose Artur Denot Medeiros, to the Director General, on behalf of the Governments of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, China, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Japan, Kazakhstan, Republic of Korea, Latvia, Lithuania, Luxemburg, Malta, Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Russian Federation, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, providing further information on those Governments' Guidelines for Nuclear Transfers

28 May 2010 - Japanese Ambassador H. Ueda visiting the LHC superconducting magnet test hall with CERN Technology Deputy Department Head L. Rossi.

CERN Multimedia

Maximilien Brice

2010-01-01

CERN-HI-1005088 02 Japanese Ambassador H. Ueda (right) visiting the LHC superconducting magnet test hall with Technology Deputy Department Head L. Rossi(left). H. Ueda is accompanied by KEK and ATLAS Collaboration T. Kondo (centre).

Communication dated 23 February 2007 addressed to the Director General from the Ambassador of the Sultanate of Oman on behalf of the Arab States that are Members and Observers of the Agency

International Nuclear Information System (INIS)

2007-01-01

The Director General has received a letter dated 23 February 2007 from the Ambassador of the Sultanate of Oman on behalf of the Arab States that are members and observers of the Agency concerning Israeli nuclear capabilities. In the light of the request expressed by the Ambassador of the Sultanate of Oman in his letter of 23 February 2007, his letter is attached for the information of all Member States

Towards a New Paradigm of Software Development: an Ambassador Driven Process in Distributed Software Companies

Science.gov (United States)

Kumlander, Deniss

The globalization of companies operations and competitor between software vendors demand improving quality of delivered software and decreasing the overall cost. The same in fact introduce a lot of problem into software development process as produce distributed organization breaking the co-location rule of modern software development methodologies. Here we propose a reformulation of the ambassador position increasing its productivity in order to bridge communication and workflow gap by managing the entire communication process rather than concentrating purely on the communication result.

The Diary of Kosa Pan (Thai Ambassador to France. June-July 1686, translated into English by Visudh Busayakul, introduced and annotated by Dirk Van der Cruysse, and edited by Michael Smithies

Directory of Open Access Journals (Sweden)

Frédéric Maurel

2013-01-01

Full Text Available As the title suggests, this account from Kosa Pan’s journal describes the first visit to France in 1686 by a full Siamese embassy. The author of this journal, Okphra Wisut Sunthorn, alias Kosa Pan, was the ratchathut (first ambassador of that embassy, and later (1688 became phra khlang (minister in charge of the royal stores, ports, and relations with foreigners under King Phetracha, after the death of King Narai (July 1688. Besides this first ambassador, the embassy was composed of the u...

Communication Received from the Permanent Mission of the Netherlands regarding Certain Member States' Guidelines for the Export of Nuclear Material, Equipment and Technology

International Nuclear Information System (INIS)

2011-12-01

The Agency has received a Note Verbale from the Permanent Mission of the Kingdom of the Netherlands, dated 12 July 2011, in which it requests that the Agency circulate to all Member States a letter of 12 July 2011 from the Chairman of the Nuclear Suppliers Group, Ambassador Piet de Klerk, to the Director General, on behalf of the Governments of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, China, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Japan, Kazakhstan, Republic of Korea, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Russian Federation, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, providing further information on those Governments' Guidelines for Nuclear Transfers [es

Communication Received from the Permanent Mission of the Netherlands regarding Certain Member States' Guidelines for the Export of Nuclear Material, Equipment and Technology

International Nuclear Information System (INIS)

2011-01-01

The Agency has received a Note Verbale from the Permanent Mission of the Kingdom of the Netherlands, dated 12 July 2011, in which it requests that the Agency circulate to all Member States a letter of 12 July 2011 from the Chairman of the Nuclear Suppliers Group, Ambassador Piet de Klerk, to the Director General, on behalf of the Governments of Argentina, Australia, Austria, Belarus, Belgium, Brazil, Bulgaria, Canada, China, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Japan, Kazakhstan, Republic of Korea, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, New Zealand, Norway, Poland, Portugal, Romania, Russian Federation, Slovakia, Slovenia, South Africa, Spain, Sweden, Switzerland, Turkey, Ukraine, the United Kingdom of Great Britain and Northern Ireland and the United States of America, providing further information on those Governments' Guidelines for Nuclear Transfers

CMS Honours Three Russian and Bielorussian companies

CERN Multimedia

2003-01-01

On 7 March, CMS handed out the three latest Gold Awards under its scheme for honouring its best suppliers suppliers (c.f. Bulletin n°10/2003). Three Russian and Bielorussian firms were honoured, on the occasion of a visit by dignitaries from the two countries. CERN played host to Anatoly Sherbak, Head of the Fundamental Research Department of the Russian Federation Ministry of Industry and Science, Ambassador Sergei Aleinik, Permanent Representative of the Republic of Belarus to the Office of the United Nations at Geneva, Andrei Pirogov, Assistant Permanent Representative of the Russian Federation to the Office of the United Nations, and Alexei Sissakian, Vice Director of the JINR (Joint Institute for Nuclear Research) at Dubna in Russia. The directors of the three Russian and Bielorussian firms have received their awards and are seen with the visiting Russian and Bielorussian dignitaries and the CMS leaders in front of the CMS hadron calorimeter, on the spot where the detector is being assembled.These promi...

Repulsion analysis of permanent magnets for the Hoop energy storage system

International Nuclear Information System (INIS)

O, B. H.; Cho, S. B.; Kim, D. I.

1996-01-01

The repulsion force of permanent magnets is studied in order to analyze the instability problem of the rotational motion of a hoop levitated by permanent magnets in the Hoop Energy Storage System (HESS). The hoop of permanent magnets is levitated to remove the mechanical complexities caused by the rotational axis. It is important to maintain stable rotational motion at any speed for the efficiency as well as the safety of the system. To set up the equations of motion, the force of levitation and the source of perturbation are represented in terms of real parameters of the permanent magnets. The instability conditions and various geometric effects of the permanent magnets are analyzed. (author)

The Public and Private Epistolary Practice of Giovanni Querini, Ambassador of the Venetian Republic in Spain (1768-1773

Directory of Open Access Journals (Sweden)

Javier ANTÓN PELAYO

2014-02-01

Full Text Available This article analyses the letter writing of Giovanni Querini, ambassador of the Republic of Venice in Spain from 1768 to 1772. Through examination of the official letters sent by him to his government and though the correspondence he maintained with his wife Caterina Contarini, the author describes the contingencies of the post, the duality of these epistolary discourses and the effectiveness of private letters for preserving marital intimacy and family sociability from a distance.

Visit by His Excellency Mr. Mame Baba Cisse, Ambassador Extraordinary and Plenipotentiary of Senegal to the United Nations Office at Geneva

CERN Multimedia

AUTHOR|(SzGeCERN)780240

2015-01-01

In the context of exploring further collaboration between Senegal and CERN, His Excellency Mr. Mame Baba Cisse, Ambassador Extraordinary and Plenipotentiary of Senegal to the United Nations Office at Geneva, visited CERN. Mrs. Fama Diagne Sene, visiting scientist from Université Alioune Diop De Bambey, is currently at CERN where she works within the Scientific Information Service on a photo-digitization project.

Delegation from the Royal Government and the Permanent Mission of Bhutan

CERN Multimedia

Patrice Loïez

2003-01-01

Photoa 01,02: Mr Yeshey Dorji, Chargé d'affaires, a. i., Permanent Mission of Bhutan in New York (3rd from left), visiting the ATLAS underground cavern with Dr Diether Blechschmidt, CERN Non-Member States Relations (4th from left) and Representatives of the Bhutan Royal Government and Permanent Mission in Geneva.

8 October 2012 - Taipei Cultural and Economic Delegation, Geneva Office Ambassador A. Tah-Ray Yui visiting the LHC superconducting magnet test hall with International Relations Office Adviser R. Voss.

CERN Multimedia

Maximilien Brice

2012-01-01

8 October 2012 - Taipei Cultural and Economic Delegation, Geneva Office Ambassador A. Tah-Ray Yui visiting the LHC superconducting magnet test hall with International Relations Office Adviser R. Voss.

Workplace bullying a risk for permanent employees.

Science.gov (United States)

Keuskamp, Dominic; Ziersch, Anna M; Baum, Fran E; Lamontagne, Anthony D

2012-04-01

We tested the hypothesis that the risk of experiencing workplace bullying was greater for those employed on casual contracts compared to permanent or ongoing employees. A cross-sectional population-based telephone survey was conducted in South Australia in 2009. Employment arrangements were classified by self-report into four categories: permanent, casual, fixed-term and self-employed. Self-report of workplace bullying was modelled using multiple logistic regression in relation to employment arrangement, controlling for sex, age, working hours, years in job, occupational skill level, marital status and a proxy for socioeconomic status. Workplace bullying was reported by 174 respondents (15.2%). Risk of workplace bullying was higher for being in a professional occupation, having a university education and being separated, divorced or widowed, but did not vary significantly by sex, age or job tenure. In adjusted multivariate logistic regression models, casual workers were significantly less likely than workers on permanent or fixed-term contracts to report bullying. Those separated, divorced or widowed had higher odds of reporting bullying than married, de facto or never-married workers. Contrary to expectation, workplace bullying was more often reported by permanent than casual employees. It may represent an exposure pathway not previously linked with the more idealised permanent employment arrangement. A finer understanding of psycho-social hazards across all employment arrangements is needed, with equal attention to the hazards associated with permanent as well as casual employment. © 2012 The Authors. ANZJPH © 2012 Public Health Association of Australia.

21 October 2008 - LHC Inauguration - Canadian Ambassador to Switzerland R. Collette welcomed by CERN Director-General R. Aymar, CERN Chief Scientific Officer J. Engelen and CERN Financial Officer S. Lettow.

CERN Multimedia

CERN Photo Service

2008-01-01

21 October 2008 - LHC Inauguration - Canadian Ambassador to Switzerland R. Collette welcomed by CERN Director-General R. Aymar, CERN Chief Scientific Officer J. Engelen and CERN Financial Officer S. Lettow.

Object permanence in the Goffin cockatoo (Cacatua goffini).

Science.gov (United States)

Auersperg, Alice M I; Szabo, Birgit; von Bayern, Auguste M P; Bugnyar, Thomas

2014-02-01

The ability to represent hidden objects plays an important role in the survival of many species. In order to provide an inclusive synopsis of the current benchmark tasks used to test object permanence in animals for a psittacine representative, we tested eight Goffin cockatoos (Cacatua goffini) on Stages 3-6 of Piagetian object permanence as well as derivations of spatial transposition, rotation, and translocation tasks. Subjects instantly solved visible displacement 3b and 4a but showed an extended plateau for solving Stage 5a at a very late age (10 months). Subjects readily solved most invisible displacement tasks including double hidings and four angles (90°, 180°, 270°, and 360°) of rotation and translocations at high performance levels, although Piagetian Stage 6 invisible displacement tasks caused more difficulties for the animals than transposition, rotations, and translocation tasks. PsycINFO Database Record (c) 2014 APA, all rights reserved.

Mutual and Equal Benefits Enjoyed in Indonesia-China Trade Relations Interview with H.E. Ambassador of The Republic of Indonesia

Institute of Scientific and Technical Information of China (English)

Sun Yongjian

2006-01-01

@@ Indonesia is one of the important partners of China in the ASEAN countries. During the passing years, the bilateral relations have witnessed great progress. In 2005, the two countries jointly promulgated the Proclamation of Strategic Partnership; in March, 2006, Jia Qinglin, Chairman of Chinese People's Political Consultative Conference visited Indonesia and gave the speech of "Strengthen the communication and cooperation. Strive for a brighter future". In August, China's Foreign Trade interviewed H.E. Mr. Sudrajat, Indonesian Ambassador.

Automated phenotyping of permanent crops

Science.gov (United States)

McPeek, K. Thomas; Steddom, Karl; Zamudio, Joseph; Pant, Paras; Mullenbach, Tyler

2017-05-01

AGERpoint is defining a new technology space for the growers' industry by introducing novel applications for sensor technology and data analysis to growers of permanent crops. Serving data to a state-of-the-art analytics engine from a cutting edge sensor platform, a new paradigm in precision agriculture is being developed that allows growers to understand the unique needs of each tree, bush or vine in their operation. Autonomous aerial and terrestrial vehicles equipped with multiple varieties of remote sensing technologies give AGERpoint the ability to measure key morphological and spectral features of permanent crops. This work demonstrates how such phenotypic measurements combined with machine learning algorithms can be used to determine the variety of crops (e.g., almond and pecan trees). This phenotypic and varietal information represents the first step in enabling growers with the ability to tailor their management practices to individual plants and maximize their economic productivity.

4th February 2011- Polish Ambassador to the United Nations Office R. A. Henczel visiting CMS control room and underground experimental area with his daughter, guided by Collaboration Spokesperson G. Tonelli.

CERN Multimedia

Maximilien Brice

2011-01-01

4th February 2011- Polish Ambassador to the United Nations Office R. A. Henczel visiting CMS control room and underground experimental area with his daughter, guided by Collaboration Spokesperson G. Tonelli.

Development of object permanence in food-storing magpies (Pica pica).

Science.gov (United States)

Pollok, B; Prior, H; Güntürkün, O

2000-06-01

The development of object permanence was investigated in black-billed magpies (Pica pica), a food-storing passerine bird. The authors tested the hypothesis that food-storing development should be correlated with object-permanence development and that specific stages of object permanence should be achieved before magpies become independent. As predicted, Piagetian Stages 4 and 5 were reached before independence was achieved, and the ability to represent a fully hidden object (Piagetian Stage 4) emerged by the age when magpies begin to retrieve food. Contrary to psittacine birds and humans, but as in dogs and cats, no "A-not-B error" occurred. Although magpies also mastered 5 of 6 invisible displacement tasks, evidence of Piagetian Stage 6 competence was ambiguous.

Communication dated 26 November 2004 received from the Permanent Representatives of France, Germany, the Islamic Republic of Iran and the United Kingdom concerning the agreement signed in Paris on 15 November 2004

International Nuclear Information System (INIS)

2004-01-01

The Director General has received a letter dated 26 November 2004 from the Permanent Representatives of France, Germany, the Islamic Republic of Iran and the United Kingdom, attaching the text of the agreement signed by the Governments of France, Germany, the United Kingdom of Great Britain and Northern Ireland with the support of the High Representative of the European Union, and the Islamic Republic of Iran, in Paris on 15 November 2004. The letter and, as requested therein, the text of the agreement, is reproduced herewith for the information of Member States

CERN collect for Earthquakein Italy August 24, 2016

CERN Multimedia

Brice, Maximilien

2016-01-01

Ghislain Roy, President of CERN's Staff Association, Maurizio Serra, Ambassador, permanent Mission of Italy to teh United NAtions Office in Geneva, FAbiola Gianotti, CERN director General and Umberto Dosselli, scientific ataché Italian Permanent Mission in Geneva, show the letter co-signed by CERN's director general and CERN' s Staff Association President indicating the amounbt collected in favour of the vicitims of the August 24 2016 earthquake in central Italy.

19 November 2014 - C. Staur Ambassador Permanent Representative of Denmark to the United Nations Office and other international organisations in Geneva

CERN Multimedia

Brice, Maximilien

2014-01-01

signing the Guest book with CERN Director-General R. Heuer and visiting the ATLAS cavern with ATLAS Collaboration, Former Spokesperson P. Jenni, ATLAS Collaboration, University of Copenhagen M. Dam and Niels Bohr Institute, University of Copenhagen, senior ATLAS Denmark member P. Hansen.

Visit of the President of the Swiss Confederation

CERN Multimedia

Anaïs Schaeffer

2016-01-01

On 24 March, CERN welcomed Johann Schneider-Ammann, President of the Swiss Confederation.   President Johann Schneider-Ammann arrived to CERN in the morning, where he was welcomed by CERN Director-General Fabiola Gianotti. During the visit, the President was accompanied by Erik Reumann, spokesperson of the Federal Department of Economic Affairs, Education and Research, Alexandre Fasel, Ambassador and Permanent Representative of Switzerland to the United Nations Office and other international organisations in Geneva, and Patrick Pardo, counsellor at the permanent Mission of Switzerland to the United Nations Office and other international organizations in Geneva. In the Main Building he exchanged a few words with Frédérick Bordry, Director for Accelerators and Technology, Martin Steinacher, Director for Finance and Human Resources, and Friedemann Eder, Head of CERN Host States relations service. President Johann Schneider-Ammann also signed the guestbook of the Organ...

[News on the trip and the diplomatic mission of a Portuguese ambassador to China in 1752. Critical and analytical study].

Science.gov (United States)

José, J; Frada, C

1994-11-01

The author of this report has worked out a critical-analytical study, based on the news of a voyage to China, carried out by a Portuguese ambassador, which was also a diplomatic mission, in 1752, during the Marquis of Pombal era, Prime Minister of king Dom Jose I. This study is directed under two perspectives: medical and historical-diplomatic. The former not only allows the assessment of the high degree of organization of this voyage as far as food supplies and medical support are concerned, but it also shows the reflection and the diagnosis correction of tuberculosis of the lungs, in a seaman, carried out by a surgeon on board, which we totally refute. The latter, which only aims at giving some further data for the study of the Portuguese Diplomatic History, let us know some of the complex procedures and protocols established between our diplomatic representative and the high Chinese rulers, both the Emperor himself and the mandarins. Contrary to other previous attempts of diplomatic, economic and social relations, either partially or totally frustrated, this mission constituted a great success for Portugal and may, indeed, be considered as a decisive step for the recognition of Portuguese sovereignty over the territory of Macao and its dependencies in 1887.

The Brazilian national system of forest permanent plots

Science.gov (United States)

Yeda Maria Malheiros de Oliveira; Maria Augusta Doetzer Rosot; Patricia Povoa de Mottos; Joberto Veloso de Freitas; Guilherme Luis Augusto Gomide; < i> et al< /i>

2009-01-01

The Brazilian National System of Forest Permanent Plots (SisPP) is a governmental initiative designed and being implemented in partnership by the Ministry of Environment (MMA), represented by the National Forest Programme (PNF) and the Brazilian Forest Service (SFB) and the Embrapa Forestry (a research center of the Brazilian Agricultural Research Corporation - Embrapa...

Communication received from the resident representative of Italy on behalf of the European Community. A communication dated 28 June 1996 from the Permanent Mission of Sweden

International Nuclear Information System (INIS)

1996-01-01

The document reproduces the text of a note verbale dated 28 June 1996 and received by the Director General of the IAEA from the Permanent Mission of Sweden on 28 June 1996 informing about the adoption, by the Government of Sweden, of the common policy declaration adopted on 20 November 1984 by the ministers for foreign affairs of the then ten members of the European Community which was transmitted to the Director General by the Resident Representative of Italy on behalf of the Community on 22 march 1985 (INFCIRC/322). The declaration deals with transfer of nuclear material, equipment and technology between the Member States of the European Union

Communication received from the resident representative of Italy on behalf of the European Community. A communication dated 17 June 1996 from the Permanent Mission of Austria

International Nuclear Information System (INIS)

1996-01-01

The document reproduces the text of a note verbale dated 17 June 1996 and received by the Director General of the IAEA from the Permanent Mission of Austria on 19 June 1996 informing about the adoption, by the Government of Austria, of the common policy declaration adopted on 20 November 1984 by the ministers for foreign affairs of the then ten members of the European Community which was transmitted to the Director General by the Resident Representative of Italy on behalf of the Community on 22 march 1985 (INFCIRC/322). The declaration deals with transfer of nuclear material, equipment and technology between the Member States of the European Union

The permanent process

DEFF Research Database (Denmark)

Møller, Jesper; McCullagh, Peter

We extend the boson process first to a large class of Cox processes and second an even larger class of infinitely divisible point processes. Density and moment results are studied in detail. These results are obtained in closed form as weighted permanents, so the extension is called a permanent...... process. Temporal extensions and a particularly tractable case of the permanent process are also studied. Extensions of the ferminon process along similar lines, leading to so-called determinant processes, are discussed at the end. While the permanent process is attractive, the determinant process...

22 February 2011 - German Ambassador to Switzerland A. Berg signing the guest book with CERN Director-General R. Heuer and visiting the LHC superconducting magnet test hall with Technology Department Head F. Bordry.

CERN Multimedia

Maximilien Brice

2011-01-01

22 February 2011 - German Ambassador to Switzerland A. Berg signing the guest book with CERN Director-General R. Heuer and visiting the LHC superconducting magnet test hall with Technology Department Head F. Bordry.

Communication received from the Permanent Mission of Spain on 12 March 2002 concerning adoption of the Euro by the Agency

International Nuclear Information System (INIS)

2002-01-01

On 12 March 2002 the Director General received a letter from the Permanent Representative of Spain, on behalf of the European Union, attaching a memorandum on the adoption of the Euro by the Agency. The letter from the Permanent Representative of Spain and, as requested, its attachment are herewith distributed for the information of Member States

15 April 2008 - British Minister for Science and Innovation I. Pearson MP visiting the ATLAS cavern with Adviser to CERN Director-General J. Ellis, Ambassador to Switzerland S. Featherstone and Collaboration Spokesperson P. Jenni

CERN Multimedia

Claudia Marcelloni

2008-01-01

15 April 2008 - British Minister for Science and Innovation I. Pearson MP visiting the ATLAS cavern with Adviser to CERN Director-General J. Ellis, Ambassador to Switzerland S. Featherstone and Collaboration Spokesperson P. Jenni

Tour of the stands at the UK@CERN industrial exhibition with the Director-General and H.E. Mr Simon Featherstone, HM Ambassador to Switzerland, hosted by Mrs. Jan Fillingham MBE, Head of Exhibitions, BEAMA

CERN Multimedia

Claudia Marcelloni

2006-01-01

Tour of the stands at the UK@CERN industrial exhibition with the Director-General and H.E. Mr Simon Featherstone, HM Ambassador to Switzerland, hosted by Mrs. Jan Fillingham MBE, Head of Exhibitions, BEAMA

The Question of Decalage Between Object Permanence and Person Permanence

Science.gov (United States)

And Others; Jackson, Elaine

1978-01-01

Presents a study of decalage between object permanence and person permanence. Decalage was influenced by environmental as well as stimulus factors with infants tested between 6- and 81/4-months/of-age. (BD)

Essure Permanent Birth Control

Science.gov (United States)

... Prosthetics Essure Permanent Birth Control Essure Permanent Birth Control Share Tweet Linkedin Pin it More sharing options ... Print Essure is a a permanently implanted birth control device for women (female sterilization). Implantation of Essure ...

Permanences GAG-EPA

CERN Document Server

GAC-EPA

2015-01-01

Le GAC organise chaque mois des permanences avec entretiens individuels. La prochaine permanence se tiendra le : Mardi 5 mai de 13 h 30 à 16 h 00 Salle de réunion de l’Association du personnel Les permanences suivantes auront lieu les mardis 2 juin, 1er septembre, 6 octobre, 3 novembre et 1er décembre 2015. Les permanences du Groupement des Anciens sont ouvertes aux bénéficiaires de la Caisse de pensions (y compris les conjoints survivants) et à tous ceux qui approchent de la retraite. Nous invitons vivement ces derniers à s’associer à notre groupement en se procurant, auprès de l’Association du personnel, les documents nécessaires.

Highlights of the inauguration ceremony for the new permanent exhibition

CERN Multimedia

CERN Bulletin

2010-01-01

The new “Universe of Particles" permanent exhibition in the Globe was unveiled this week to its first visitors. On Monday, 28 June, in the presence of representatives of the local authorities, CERN Director-General Rolf Heuer cut the ribbon; on Tuesday, 29 and Wednesday 30 June the Globe's doors remained open for visits by the CERN personnel.   Cutting the ribbon at the inauguration of the Globe's new permanent exhibition At the conclusion of the inauguration ceremony, the Head of the Education Group, Rolf Landua, expressed his satisfaction: “It's wonderful. We are very happy that it has all turned out so well. Now we look forward to lots of visitors.” The exhibition represents a major addition to the tourist destinations in the region and an important tool for the public awareness of science, which could also be useful for schools. “The purpose of the exhibition is to inspire visitors, to arouse their curiosity about science and to motivate them t...

11 March 2010 - Ambassador of Canada to Switzerland and to Liechtenstein R. Santi in the ATLAS visitor centre with Collaboration Deputy Spokesperson A. Lankford and signing the guest book with CERN Director-General R. Heuer.

CERN Multimedia

Maximilien Brice

2010-01-01

11 March 2010 - Ambassador of Canada to Switzerland and to Liechtenstein R. Santi in the ATLAS visitor centre with Collaboration Deputy Spokesperson A. Lankford and signing the guest book with CERN Director-General R. Heuer.

Her Excellency Mrs Sarah Gillett Her Majesty's Ambassador to the Swiss Confederation United Kingdom of Great Britain and Northern Ireland on the occasion of the Antony Gormley sculpture unveiling ceremony Wednesday 7th December 2011

CERN Document Server

Maximilien Brice

2011-01-01

Her Excellency Mrs Sarah Gillett Her Majesty's Ambassador to the Swiss Confederation United Kingdom of Great Britain and Northern Ireland on the occasion of the Antony Gormley sculpture unveiling ceremony Wednesday 7th December 2011

Signature of the "INB" Convention between the French Government and CERN

CERN Multimedia

Patrice Loïez

2000-01-01

Photo 06:(l. to r.) Mr Michel Giacobbi, Counsel French Permanent Mission, H.E. Mr Philippe Petit, Ambassador for France to the United Nations, the Director General Prof. Luciano Maiani, and Mr Jean-Marie Dufour, Legal Counsel of CERN; Photo 12: H.E. Mr Philippe Petit and the Director General Prof. Luciano Maiani

Attempts to Transform an Organization

DEFF Research Database (Denmark)

Risberg, Annette

This paper builds on a case study of diversity work in a Swedish municipality, Malmö. It focuses on certain actors partaking in the diversity work done in the municipality that of a gender and diversity committee and its members – here called diversity ambassadors. I will describe the work...... of the diversity ambassadors and discuss what impact they could possibly have on the organization. Organizational efforts to change inequalities at the workplace may take different forms. The literature describes different ways to organize the diversity and equality work. In this paper I will focus a specific...... group of people assigned to do diversity work – so called diversity ambassadors (Omanović, 2006) or diversity champions (Subeliani & Tsogas, 2005). The diversity ambassadors are representatives of different departments and units of the organization. The ambassadors are convened in a committee in order...

3-D analysis of eddy current in permanent magnet of interior permanent magnet motors

International Nuclear Information System (INIS)

Kawase, Yoshihiro; Yamaguchi, Tadashi; Fukanaga, Hiromu; Ito, Shokichi

2002-01-01

Interior permanent magnet motors are widely used in various fields. However, in high-speed operations, it is important to decrease the eddy current loss in the permanent magnet. In order to decrease the eddy current loss, we propose to divide the permanent magnet. In this paper, we clarified the effect of division of permanent magnet on the eddy current loss using the 3-D finite element method. (Author)

Comparison of torque capability of three-phase permanent magnet synchronous motors with different permanent magnet arrangement

International Nuclear Information System (INIS)

Stumberger, Bojan; Stumberger, Gorazd; Hadziselimovic, Miralem; Hamler, Anton; Gorican, Viktor; Jesenik, Marko; Trlep, Mladen

2007-01-01

The paper presents a comparison of torque capability of three-phase permanent magnet synchronous motors with different permanent magnet arrangement. Motors with the following permanent magnet topologies were accounted for in the comparison: the surface-mounted permanent magnet synchronous motor (SMPMSM), the interior permanent magnet synchronous motor (IPMSM), the permanent magnet-assisted synchronous reluctance motor (PMASRM) and the flux reversal permanent magnet motor (FRPMM). Finite element method analysis is employed to determine the performance of each motor. Calculated performance of four-pole IPMSM determined by finite element method calculation is confirmed with the measurements at nearly constant nominal output power in the range of speed 3000-10,000 rpm

11 June 2012 - Austrian Federal Minister of Labour, Social Affairs and Consumer Protection R. Hundstorfer signing the guest book with Head of International Relations F. Pauss and Ambassador to the UN C. Strohal (CERN-HI-120611334)

CERN Multimedia

2012-01-01

11 June 2012 - Austrian Federal Minister of Labour, Social Affairs and Consumer Protection R. Hundstorfer signing the guest book with Head of International Relations F. Pauss and Ambassador to the UN C. Strohal (CERN-HI-120611334)

30th April 2009 - Signature of the guest book and exchange of gifts between the Ambassador of Poland to Switzerland J. Starzyk and CERN Coordinator for External Relations F. Pauss.

CERN Multimedia

Maximilien Brice

2009-01-01

List of the delegation: H.E Mr Jarosław Starzyk, Ambassador of Poland to Switzerland Mrs Iwona Starzyk, Ambassador’s spouse Mr Jerzy Wieczorek, First Counsellor Mr Mariusz Sawiński, Counsellor, Head of the trade and the investment section Mr Jarosław Bajaczyk, Cultural Attaché Mr Marcin Król, Consul

Permanent magnetic ferrite based power-tunable metamaterials

Energy Technology Data Exchange (ETDEWEB)

Zhang, Guanqiao; Lan, Chuwen [State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Gao, Rui [High Temperature Thermochemistry Laboratory, Department of Mining and Materials Engineering, McGill University, Montreal, Quebec H3A 0C5 (Canada); Zhou, Ji, E-mail: zhouji@tsinghua.edu.cn [State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China)

2017-08-15

Highlights: • Power-tunable metamaterials based on barium permanent magnetic ferrite have been proposed and fabricated. • It is observed that resonant frequency of the array shifts upon altering the output power. • This kind of power-tunable behavior is due to the temperature rise as a result of FMR-induced heat buildup. • This work offers a practical idea to tune ferrite metamaterials besides magneto-tunability and thermal-tunability. - Abstract: Power-tunable metamaterials based on barium permanent magnetic ferrite have been proposed and fabricated in this research. Scattering parameter measurements confirm a shift in resonant frequency in correlation to changes in incident electromagnetic power within microwave frequency band. The tunable phenomenon represented by a blue-shift in transmission spectra in the metamaterials array can be attributed to a decrease in saturation magnetization resulting from FMR-induced temperature elevation upon resonant conditions. This power-dependent behavior offers a simple and practical route towards dynamically fine-tunable ferrite metamaterials.

Permanent quadrupole magnets

International Nuclear Information System (INIS)

Bush, E.D. Jr.

1976-01-01

A family of quadrupole magnets using a soft iron return yoke and circular cross-section permanent magnet poles were fabricated to investigate the feasibility for use in ion or electron beam focusing applications in accelerators and transport lines. Magnetic field measurements yielded promising results. In fixed-field applications, permanent magnets with sufficient gradients would be a low cost substitute for conventional electromagnets, eliminating the need for power supplies, associated wiring, and cooling. Based on preliminary tests, it was seen that permanent quadrupole magnets can offer a low cost, reliable solution in applications requiring small, fixed-field focusing devices for use in ion or electron-beam transport systems. Permanent magnets do require special considerations in design, fabrication, handling, and service that are different than encountered in conventional quadrupole magnets. If these basic conditions are satisfied, the resulting beam-focusing device would be stable, maintenance free, with virtually an indefinite lifetime

Tuning permanent magnets with adjustable field clamps

International Nuclear Information System (INIS)

Schermer, R.I.

1987-01-01

The effective length of a permanent-magnet assembly can be varied by adjusting the geometrical parameters of a field clamp. This paper presents measurements on a representative dipole and quadrupole as the field clamp is withdrawn axially or radially. The detailed behavior depends upon the magnet multipolarity and geometry. As a rule-of-thumb, a 3-mm-thick iron plate placed at one end plane of the magnet will shorten the length by one-third of the magnet bore radius

CERN servers go to Mexico

CERN Multimedia

Stefania Pandolfi

2015-01-01

On Wednesday, 26 August, 384 servers from the CERN Computing Centre were donated to the Faculty of Science in Physics and Mathematics (FCFM) and the Mesoamerican Centre for Theoretical Physics (MCTP) at the University of Chiapas, Mexico.   CERN’s Director-General, Rolf Heuer, met the Mexican representatives in an official ceremony in Building 133, where the servers were prepared for shipment. From left to right: Frédéric Hemmer, CERN IT Department Head; Raúl Heredia Acosta, Deputy Permanent Representative of Mexico to the United Nations and International Organizations in Geneva; Jorge Castro-Valle Kuehne, Ambassador of Mexico to the Swiss Confederation and the Principality of Liechtenstein; Rolf Heuer, CERN Director-General; Luis Roberto Flores Castillo, President of the Swiss Chapter of the Global Network of Qualified Mexicans Abroad; Virginia Romero Tellez, Coordinator of Institutional Relations of the Swiss Chapter of the Global Network of Qualified Me...

The Armenian minister for trade and economic development Karen Chshmaritian, visited CERN on 4 July and toured the ATLAS experimental cavern and assembly hall

CERN Multimedia

Maximilien Brice

2003-01-01

Armenian Minister for Trade and Economic Development, K. Chshmaritian third from right with from left to right : Aram Kotzinian, JINR, Dubna; Dr Marzio Nessi, ATLAS, Zohrad Mnatsakanian, Ambassador at the Permanent Mission of the Republic of Armenia in Geneva, Karen Chshmaritian, Armenian Minister for Trade and Economic Development, Alexey Sissakian, Vice-Director of JINR and Peter Jenni, ATLAS Spokesperson.

2 October 2013 - Israel Ambassador to the United Nations Office and other International Organizations at Geneva E. Manor on the occasion of the inauguration of the "Israel at CERN" Industrial Exhibition with CERN Director-General R. Heuer.

CERN Multimedia

Anna Pantelia

2013-01-01

2 October 2013 - Israel Ambassador to the United Nations Office and other International Organizations at Geneva E. Manor on the occasion of the inauguration of the "Israel at CERN" Industrial Exhibition with CERN Director-General R. Heuer.

Permanent magnetic ferrite based power-tunable metamaterials

Science.gov (United States)

Zhang, Guanqiao; Lan, Chuwen; Gao, Rui; Zhou, Ji

2017-08-01

Power-tunable metamaterials based on barium permanent magnetic ferrite have been proposed and fabricated in this research. Scattering parameter measurements confirm a shift in resonant frequency in correlation to changes in incident electromagnetic power within microwave frequency band. The tunable phenomenon represented by a blue-shift in transmission spectra in the metamaterials array can be attributed to a decrease in saturation magnetization resulting from FMR-induced temperature elevation upon resonant conditions. This power-dependent behavior offers a simple and practical route towards dynamically fine-tunable ferrite metamaterials.

Object permanence in young infants: further evidence.

Science.gov (United States)

Baillargeon, R; DeVos, J

1991-12-01

Recent evidence suggests that 4.5- and even 3.5-month-old infants realize that objects continue to exist when hidden. The goal of the present experiments was to obtain converging evidence of object permanence in young infants. Experiments were conducted using paradigms previously used to demonstrate object permanence in 5.5-month-old infants and 6.5-month-old infants. In one experiment, 3.5-month-old infants watched a short or a tall carrot slide along a track. The track's center was hidden by a screen with a large window in its upper half. The short carrot was shorter than the window's lower edge and so did not appear in the window when passing behind the screen; the tall carrot was taller than the window's lower edge and hence should have appeared in the window but did not. The infants looked reliably longer at the tall than at the short carrot event, suggesting that they (a) represented the existence, height, and trajectory of each carrot behind the screen and (b) expected the tall carrot to appear in the screen window and were surprised that it did not. Control trials supported this interpretation. In another experiment, 4.0-month-old infants saw a toy car roll along a track that was partly hidden by a screen. A large toy mouse was placed behind the screen, either on top or in back of the track. The female infants looked reliably longer when the mouse stood on top as opposed to in back of the track, suggesting that they (a) represented the existence and trajectory of the car behind the screen, (b) represented the existence and location of the mouse behind the screen, and (c) were surprised to see the car reappear from behind the screen when the mouse stood in its path. A second experiment supported this interpretation. The results of these experiments provide further evidence that infants aged 3.5 months and older are able to represent and to reason about hidden objects.

High-level panel of experts to recommend future course for IAEA

International Nuclear Information System (INIS)

2008-01-01

Energy 1984-1987; Louise Frechette - Distinguished Fellow, The Centre for International Governance Innovation; former Canadian Deputy Minister; former UN Deputy Secretary-General; Anne Lauvergeon - Chief Executive Officer of AREVA Group; Kishore Mahbubani - Dean, Professor in the Practice of Public Policy, Lee Kuan Yew School of Public Policy, National University of Singapore; former Ambassador to the UN; former President of the UN Security Council; Ambassador Ronaldo Mota Sardenberg - President of the National Telecommunication Agency of Brazil (ANATEL); former Permanent Representative of Brazil to the UN; former Minister of Science and Technology; Ambassador Pius Yasebasi Ng'Wandu - former Minister of Science, Technology and Higher Education, and Minister of Water, United Republic of Tanzania; Senator Sam Nunn - Co-Chairman and Chief Executive Officer of the Nuclear Threat Initiative; former United States Senator; Ambassador Karl Theodor Paschke - former UN Under-Secretary-General for Internal Oversight Services 1994-1999; former Permanent Representative of the Federal Republic of Germany to the IAEA 1984-1986; Dr. Wolfgang Schuessel - former Federal Chancellor of Austria; Leader of the Parliamentary Group of the Austrian People's Party; Academician Evgeny Velikhov - President of the Russian Research Centre Kurchatov Institute; Academician and Secretary of the Russian Academy of Sciences; Professor Wang Dazhong - Honorary Chairman of Tsinghua University Council; Member of the Chinese Academy of Sciences; former President of Tsinghua University; Director of the Institute of Nuclear Energy Technology (INET) of Tsinghua University; Vice-Chairman, Standing Committee of Beijing People's Congress; Dr. Hiroyuki Yoshikawa - President of the National Institute of Advanced Industrial Science and Technology, Tokyo; former President of the University of Tokyo. (IAEA)

Characterization and classification of invertebrates as indicators of flow permanence in headwater streams

Science.gov (United States)

Headwater streams represent a large proportion of river networks and many have temporary flow. Litigation has questioned whether these streams are jurisdictional under the Clean Water Act. Our goal was to identify indicators of flow permanence by comparing invertebrate assemblage...

16 February 2012 - Chinese Taipei Ambassador to Switzerland F. Hsieh in the ATLAS visitor centre, ATLAS experimental area and LHC tunnel at Point 1 with Collaboration Deputy Sookesperson A. Lankford, throughout accompanied by International Relations Adviser R. Voss.

CERN Multimedia

Jean-Claude Gadmer

2012-01-01

16 February 2012 - Chinese Taipei Ambassador to Switzerland F. Hsieh in the ATLAS visitor centre, ATLAS experimental area and LHC tunnel at Point 1 with Collaboration Deputy Sookesperson A. Lankford, throughout accompanied by International Relations Adviser R. Voss.

20 Novemnber 2013 - Ambassador of the Kingdom of the Netherlands to Switzerland B. Twaalfhoven in the LHC tunnel with CERN scientists G. De Rijk and H. Ten Kate; signing the guest book with CERN Director-General R. Heuer.

CERN Multimedia

Anna Pantelia

2013-01-01

20 Novemnber 2013 - Ambassador of the Kingdom of the Netherlands to Switzerland B. Twaalfhoven in the LHC tunnel with CERN scientists G. De Rijk and H. Ten Kate; signing the guest book with CERN Director-General R. Heuer.

Permanent magnets including undulators and wigglers

CERN Document Server

Bahrdt, J

2010-01-01

After a few historic remarks on magnetic materials we introduce the basic definitions related to permanent magnets. The magnetic properties of the most common materials are reviewed and the production processes are described. Measurement techniques for the characterization of macroscopic and microscopic properties of permanent magnets are presented. Field simulation techniques for permanent magnet devices are discussed. Today, permanent magnets are used in many fields. This article concentrates on the applications of permanent magnets in accelerators starting from dipoles and quadrupoles on to wigglers and undulators.

Non linear permanent magnets modelling with the finite element method

International Nuclear Information System (INIS)

Chavanne, J.; Meunier, G.; Sabonnadiere, J.C.

1989-01-01

In order to perform the calculation of permanent magnets with the finite element method, it is necessary to take into account the anisotropic behaviour of hard magnetic materials (Ferrites, NdFeB, SmCo5). In linear cases, the permeability of permanent magnets is a tensor. This one is fully described with the permeabilities parallel and perpendicular to the easy axis of the magnet. In non linear cases, the model uses a texture function which represents the distribution of the local easy axis of the cristallytes of the magnet. This function allows a good representation of the angular dependance of the coercitive field of the magnet. As a result, it is possible to express the magnetic induction B and the tensor as functions of the field and the texture parameter. This model has been implemented in the software FLUX3D where the tensor is used for the Newton-Raphson procedure. 3D demagnetization of a ferrite magnet by a NdFeB magnet is a suitable representative example. They analyze the results obtained for an ideally oriented ferrite magnet and a real one using a measured texture parameter

Regional integration of developing countries. Interview with Amr Moussa, the Secretary General of the League of Arab States (2001-2011

Directory of Open Access Journals (Sweden)

E M Savicheva

2017-12-01

Full Text Available Amr Mussa is one of the most experienced diplomats with rich experience in international organizations. In 1958 Mr. Moussa joined the Ministry of Foreign Affairs of Egypt, where he worked in several departments and Egyptian missions including Egypt’s UN mission (1985-1972. In 1974-1977 Amr Moussa was an Assistant and Advisor to the Minister for Foreign Affairs of the Arab Republic of Egypt. In 1977-1981 and 1986-1990 he held office of the Department of International Organizations as the Director in the Ministry of Foreign Affairs of Egypt. In 1981-1983 Mr. Moussa was an Alternate Permanent Representative of Egypt to the United Nations in New York. In 1983-1986 he worked as Ambassador to India. Amr Moussa worked as Permanent Representative of the Arab Republic of Egypt to the United Nations in 1990-1991. In 1991-2001 he was a head of the Ministry of Foreign Affairs of Egypt. In 2001-2011 he worked as Secretary General of the League of Arab States. In his interview, Mr. Amr Moussa talks about the role of international organizations in the developing world, the peculiarities of regional political and economic integration of developing countries. Particular attention is paid to the problems of peacekeeping activities at the regional level.

Multidisciplinary action in the permanent education of community health agents

Directory of Open Access Journals (Sweden)

Natália Ferreira Silva

2017-12-01

Full Text Available Primary Care should be the preferential contact of users and the main gateway to the health care network, since it covers health promotion and protection, aiming to develop comprehensive care that impacts on the health situation and the autonomy of the people, in the determinants and conditioners of health of the collectivities. The Family Health teams (ESF are composed of several professionals, among them we highlight the community health agents (ACS who play a strategic role with the ESF. Therefore, the objective of this study is to report the experience of conducting a group with ACS, developed with participatory methodology, with the purpose of assisting in the process of permanent education. The activities of permanent education were carried out in four Basic Units of Family Health (UBSF and were carried out in four meetings. It is believed that the reorganization of the work process is favored by the permanent education program, since the ACS represent the initial link of the work. Finally, we verified that the development of the project made it possible to reflect on the process of building popular education in health, consolidating knowledge that can actually promote health.

Permanent quadrupole magnets

International Nuclear Information System (INIS)

Bush, E.D. Jr.

1976-01-01

A family of quadrupole magnets using a soft iron return yoke and circular cross-section permanent magnet poles were fabricated to investigate the feasibility for use in ion or electron beam focusing applications in accelerators and transport lines. Magnetic field measurements yielded promising results. In fixed-field applications, permanent magnets with sufficient gradients would be a low cost substitute for conventional electromagnets, eliminating the need for power supplies, associated wiring, and cooling. (author)

21 January 2008 - Vice-President of the Human Rights Commission Z. Muhsin Al Hussein, Ambassador to United Nations A. Attar and their delegation from Saudi Arabia, visiting the ATLAS experimental cavern with Collaboration Spokesperson P. Jenni and Technical Coordinator M. Nessi.

CERN Multimedia

Claudia Marcelloni

2008-01-01

21 January 2008 - Vice-President of the Human Rights Commission Z. Muhsin Al Hussein, Ambassador to United Nations A. Attar and their delegation from Saudi Arabia, visiting the ATLAS experimental cavern with Collaboration Spokesperson P. Jenni and Technical Coordinator M. Nessi.

7 May 2013 - Ambassador of the Federal Republic of Germany to Switzerland and Liechtenstein P. Gottwald and Mrs Gottwald in the ATLAS experimental cavern and LHC tunnel with Collaboration Deputy Spokesperson T. Wengler and German Scientists A. Schopper and V. Mertens.

CERN Multimedia

Maximilien Brice

2013-01-01

7 May 2013 - Ambassador of the Federal Republic of Germany to Switzerland and Liechtenstein P. Gottwald and Mrs Gottwald in the ATLAS experimental cavern and LHC tunnel with Collaboration Deputy Spokesperson T. Wengler and German Scientists A. Schopper and V. Mertens.

NASA Airborne Astronomy Ambassadors (AAA) Professional Development and NASA Connections

Science.gov (United States)

Backman, D. E.; Clark, C.; Harman, P. K.

2017-12-01

NASA's Airborne Astronomy Ambassadors (AAA) program is a three-part professional development (PD) experience for high school physics, astronomy, and earth science teachers. AAA PD consists of: (1) blended learning via webinars, asynchronous content learning, and in-person workshops, (2) a STEM immersion experience at NASA Armstrong's B703 science research aircraft facility in Palmdale, California, and (3) ongoing opportunities for connection with NASA astrophysics and planetary science Subject Matter Experts (SMEs). AAA implementation in 2016-18 involves partnerships between the SETI Institute and seven school districts in northern and southern California. AAAs in the current cohort were selected by the school districts based on criteria developed by AAA program staff working with WestEd evaluation consultants. The selected teachers were then randomly assigned by WestEd to a Group A or B to support controlled testing of student learning. Group A completed their PD during January - August 2017, then participated in NASA SOFIA science flights during fall 2017. Group B will act as a control during the 2017-18 school year, then will complete their professional development and SOFIA flights during 2018. A two-week AAA electromagnetic spectrum and multi-wavelength astronomy curriculum aligned with the Science Framework for California Public Schools and Next Generation Science Standards was developed by program staff for classroom delivery. The curriculum (as well as the AAA's pre-flight PD) capitalizes on NASA content by using "science snapshot" case studies regarding astronomy research conducted by SOFIA. AAAs also interact with NASA SMEs during flight weeks and will translate that interaction into classroom content. The AAA program will make controlled measurements of student gains in standards-based learning plus changes in student attitudes towards STEM, and observe & record the AAAs' implementation of curricular changes. Funded by NASA: NNX16AC51

Object permanence and working memory in cats (Felis catus).

Science.gov (United States)

Goulet, S; Doré, F Y; Rousseau, R

1994-10-01

Cats (Felis catus) find an object when it is visibly moved behind a succession of screens. However, when the object is moved behind a container and is invisibly transferred from the container to the back of a screen, cats try to find the object at or near the container rather than at the true hiding place. Four experiments were conducted to study search behavior and working memory in visible and invisible displacement tests of object permanence. Experiment 1 compared performance in single and in double visible displacement trials. Experiment 2 analyzed search behavior in invisible displacement tests and in analogs using a transparent container. Experiments 3 and 4 tested predictions made from Experiment 1 and 2 in a new situation of object permanence. Results showed that only the position changes that cats have directly perceived are encoded and activated in working memory, because they are unable to represent or infer invisible movements.

31 CFR 515.335 - Permanent resident alien.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Permanent resident alien. 515.335... Definitions § 515.335 Permanent resident alien. As used in § 515.208, the term permanent resident alien means an alien lawfully admitted for permanent residence into the United States. [61 FR 37386, July 18...

Lawful Permanent Residents - Annual Report

Data.gov (United States)

Department of Homeland Security — A lawful permanent resident (LPR) or 'green card' recipient is defined by immigration law as a person who has been granted lawful permanent residence in the United...

21 CFR 886.4445 - Permanent magnet.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Permanent magnet. 886.4445 Section 886.4445 Food... DEVICES OPHTHALMIC DEVICES Surgical Devices § 886.4445 Permanent magnet. (a) Identification. A permanent magnet is a nonelectric device that generates a magnetic field intended to find and remove metallic...

SmartRoads: training Indonesian workers to become road safety ambassadors in industrial and community settings.

Science.gov (United States)

Montero, Kerry; Spencer, Graham; Ariens, Bernadette

2012-06-01

This paper reports on a programme to improve road safety awareness in an industrial community in the vicinity of Jakarta, in Indonesia. Adapting the model of a successful community and school-based programme in Victoria, in Australia, and using a peer education approach, 16 employees of a major manufacturing company were trained to implement road safety education programmes amongst their peers. Specific target groups for the educators were colleagues, schools and the local community. Over 2 days the employees, from areas as diverse as production, public relations, personnel services, administration and management, learned about road safety facts, causes of traffic casualties, prevention approaches and peer education strategies. They explored and developed strategies to use with their respective target groups and practised health education skills. The newly trained workers received certificates to acknowledge them as 'SmartRoads Ambassadors' and, with follow-up support and development, became road safety educators with a commitment and responsibility to deliver education to their respective work and local communities. This paper argues that the model has potential to provide an effective and locally relevant response to road safety issues in similar communities.

[Permanent education in health: a review].

Science.gov (United States)

Miccas, Fernanda Luppino; Batista, Sylvia Helena Souza da Silva

2014-02-01

To undertake a meta-synthesis of the literature on the main concepts and practices related to permanent education in health. A bibliographical search was conducted for original articles in the PubMed, Web of Science, LILACS, IBECS and SciELO databases, using the following search terms: "public health professional education", "permanent education", "continuing education", "permanent education health". Of the 590 articles identified, after applying inclusion and exclusion criteria, 48 were selected for further analysis, grouped according to the criteria of key elements, and then underwent meta-synthesis. The 48 original publications were classified according to four thematic units of key elements: 1) concepts, 2) strategies and difficulties, 3) public policies and 4) educational institutions. Three main conceptions of permanent education in health were found: problem-focused and team work, directly related to continuing education and education that takes place throughout life. The main strategies for executing permanent education in health are discussion, maintaining an open space for permanent education , and permanent education clusters. The most limiting factor is mainly related to directly or indirect management. Another highlight is the requirement for implementation and maintenance of public policies, and the availability of financial and human resources. The educational institutions need to combine education and service aiming to form critical-reflexive graduates. The coordination between health and education is based as much on the actions of health services as on management and educational institutions. Thus, it becomes a challenge to implement the teaching-learning processes that are supported by critical-reflexive actions. It is necessary to carry out proposals for permanent education in health involving the participation of health professionals, teachers and educational institutions. To undertake a meta-synthesis of the literature on the main concepts and

Periodic permanent magnet focused klystron

Science.gov (United States)

Ferguson, Patrick; Read, Michael; Ives, R Lawrence

2015-04-21

A periodic permanent magnet (PPM) klystron has beam transport structures and RF cavity structures, each of which has permanent magnets placed substantially equidistant from a beam tunnel formed about the central axis, and which are also outside the extent of a cooling chamber. The RF cavity sections also have permanent magnets which are placed substantially equidistant from the beam tunnel, but which include an RF cavity coupling to the beam tunnel for enhancement of RF carried by an electron beam in the beam tunnel.

Evaluation of spontaneous space closure and development of permanent dentition after extraction of hypomineralized permanent first molars.

Science.gov (United States)

Jälevik, Birgitta; Möller, Marie

2007-09-01

The aim of this study was to evaluate spontaneous space closure, development of the permanent dentition, and need for orthodontic treatment after extraction of permanent first molars due to severe molar-incisor hypomineralization (MIH). Twenty-seven children aged 5.6-12.7 (median 8.2) years had one to four permanent first molars extracted due to severe MIH. Each case was followed up on individual indications 3.8-8.3 (median 5.7) years after extractions. The eruption of the permanent dentition, and space closure were documented by orthopantomograms, casts, photographs, and/or bitewings. Fifteen children were judged to have a favourable spontaneous development of their permanent dentition without any orthodontic intervention. Seven children were or should be subjected to orthodontic treatment for other reasons registered prior to the extraction. Five children were judged to have a treatment at least caused by the extractions, but three of them abstained because of no subjective treatment need. Extraction of permanent first molars severely affected by MIH is a good treatment alternative. Favourable spontaneous space reduction and development of the permanent dentition positioning can be expected without any intervention in the majority of cases extracted prior to the eruption of the second molar.

Modern permanent magnetic materials - preparation and properties

International Nuclear Information System (INIS)

Rodewald, W.

1989-01-01

First of all, the basic properties of the classical (steel, AlNiCo) permanent magnetic materials and the modern rare-earth (RE) permanent magnetic materials are compared. Since the properties of RE permanent magnets depend on the particular production process, the fundamentals of the main industrial processes (powder metallurgy, rapid-solidification technique) are described and the typical properties are explained. Furthermore the production processes in development such as mechanical alloying, melt spinning technique and extrusion upsetting are briefly outlined. For applying the permanent magnets, they have to be completely magnetized. The magnetization behaviour of the various RE permanent magnets is discussed by means of the internal demagnetization curve. Finally the various influences on the temperature stability of RE permanent magnets are compiled. (orig./MM) [de

Lawful Permanent Residents Fiscal Year 2015 State

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Lawful Permanent Residents Fiscal Year 2014 Country

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Lawful Permanent Residents Fiscal Year 2011 State

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Lawful Permanent Residents Fiscal Year 2015 Country

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Lawful Permanent Residents Fiscal Year 2016 State

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Lawful Permanent Residents Fiscal Year 2014 State

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Topology optimized permanent magnet systems

DEFF Research Database (Denmark)

Bjørk, Rasmus; Bahl, Christian; Insinga, Andrea Roberto

2017-01-01

Topology optimization of permanent magnet systems consisting of permanent magnets, high permeability iron and air is presented. An implementation of topology optimization for magnetostatics is discussed and three examples are considered. The Halbach cylinder is topology optimized with iron...... and an increase of 15% in magnetic efficiency is shown. A topology optimized structure to concentrate a homogeneous field is shown to increase the magnitude of the field by 111%. Finally, a permanent magnet with alternating high and low field regions is topology optimized and a ΛcoolΛcool figure of merit of 0...

Visits from Croatia and Belarus

CERN Multimedia

2003-01-01

On 23 September, CERN was visited by two Ministers, Anatoly Rusetsky, Chairman of the Committee on Science and Technology of the Republic of Belarus, and Professor Gvozden Flego, Croatian Minister of Science and Technology. Mr Rusetsky met with Roger Cashmore, Research Director for Collider Programmes, and Michel Della Negra, spokesperson of the CMS experiment, and visited the CMS detector assembly hall. Professor Flego also met Mr Cashmore and visited the NA49 and CAST experiments, the LHC superconducting magnet test hall, the ALICE experiment cavern, and the assembly hall for the CMS experiment. From left to right: Nikola Godinovic, working at CMS, Jürgen Schukraft, ALICE spokesperson, Gordan Markotic, Ambassador and Permanent Representative of Croatia to the United Nations and other international organisations in Geneva, Professor Gvozden Flego, Minister of Science and Technology, Republic of Croatia.

14 November 2013 - Bangladesh Ministry of Education Secretary K.AN. Chowdhury signing an Expression of Interest and CERN guest book with CERN Director-General R. Heuer. Ambassador to the UNOG A. Hannan and CERN Deputy Head of International Relations E. Tsesmelis also present.

CERN Multimedia

Maximilien Brice

2013-01-01

14 November 2013 - Bangladesh Ministry of Education Secretary K.AN. Chowdhury signing an Expression of Interest and CERN guest book with CERN Director-General R. Heuer. Ambassador to the UNOG A. Hannan and CERN Deputy Head of International Relations E. Tsesmelis also present.

Novel Sensorless Six-Step Communication Strategy for a Surface Permanent Magnet Synchronous Motor with DC Link Measurement

DEFF Research Database (Denmark)

Munteanu, A.; Agarlita, S. C.; Blaabjerg, Frede

2012-01-01

The present paper introduces a novel six-step commutation strategy for sensorless control applied for a surface permanent magnet synchronous motor that implies only dc link measurement (battery current and battery voltage). The control strategy makes use of a modified I-f starting procedure and t......-crossing of the back-emf are obtained from an observer that uses both current and battery voltage. The case study is represented by a surface permanent magnet synchronous motor prototype (6 /8 configuration), designed for the automotive air conditioning compressor drive....

Canadian Eskimo permanent tooth emergence timing.

Science.gov (United States)

Mayhall, J T; Belier, P L; Mayhall, M F

1978-08-01

To identify the times of emergence of the permanent teeth of Canadian Eskimos (Inuit), 368 children and adolescents were examined. The presence or absence of all permanent teeth except the third molars was recorded and these data subjected to probit analysis. Female emergence times were advanced over males. Generally, the Inuit of both sexes showed statistically significant earlier emergence times than Montreal children, except for the incisors. The present results do not support hypotheses indicating that premature extraction of the deciduous teeth advances the emergence of their succedaneous counterparts. There is some indication the controls of deciduous tooth emergence continue to play some part in emergence of the permanent dentition, especially the first permanent teeth that emerge.

13 CFR 120.900 - Sources of permanent financing.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Sources of permanent financing... Development Company Loan Program (504) Permanent Financing § 120.900 Sources of permanent financing. Permanent financing for each Project must come from three sources: the Borrower's contribution, Third-Party Loans, and...

[The Object Permanence Fallacy.] Commentary.

Science.gov (United States)

Bradley, Ben S.

1996-01-01

Suggests that Greenberg's challenge to the centrality of object permanence in developmental thinking reveals that developmentalists' theories about childhood speak about their own self-images. Notes that developmentalists have been guilty of not only the object permanence fallacy but also the genetic fallacy, or the mistaken belief that describing…

Topology optimized permanent magnet systems

Science.gov (United States)

Bjørk, R.; Bahl, C. R. H.; Insinga, A. R.

2017-09-01

Topology optimization of permanent magnet systems consisting of permanent magnets, high permeability iron and air is presented. An implementation of topology optimization for magnetostatics is discussed and three examples are considered. The Halbach cylinder is topology optimized with iron and an increase of 15% in magnetic efficiency is shown. A topology optimized structure to concentrate a homogeneous field is shown to increase the magnitude of the field by 111%. Finally, a permanent magnet with alternating high and low field regions is topology optimized and a Λcool figure of merit of 0.472 is reached, which is an increase of 100% compared to a previous optimized design.

Teaching Object Permanence: An Action Research Study

Science.gov (United States)

Bruce, Susan M.; Vargas, Claudia

2013-01-01

"Object permanence," also known as "object concept" in the field of visual impairment, is one of the most important early developmental milestones. The achievement of object permanence is associated with the onset of representational thought and language. Object permanence is important to orientation, including the recognition of landmarks.…

Intrusive luxation of 60 permanent incisors

DEFF Research Database (Denmark)

Tsilingaridis, Georgios; Malmgren, Barbro; Andreasen, Jens O

2012-01-01

  Intrusive luxation in the permanent dentition is an uncommon injury but it is considered one of the most severe types of dental trauma because of the risk for damage to the periodontal ligament, pulp and alveolar bone. Management of intrusive luxation in the permanent dentition is controversial....... The purpose of this study was to evaluate pulp survival and periodontal healing in intrusive luxated permanent teeth in relation to treatment alternatives, degree of intrusion and root development....

Permanent magnet materials and their application

International Nuclear Information System (INIS)

Campbell, P.

1994-01-01

Permanent magnets are of great industrial importance in industrial drives, consumer products, computers, and automobiles. Since 1970, new classes of magnet materials have been developed. This book reviews the older and newer materials and is presented as a comprehensive design text for permanent magnets and their applications. After an initial chapter on the fundamentals of magnetism, the author discusses magnetic physics considerations specific to permanent magnets and describes the fabrications and characteristics of commercial materials: alnico, samarium-cobalt, ferrite, and neodymium-iron-boron. Thermal stability, magnet design procedures, magnetic field analysis methods, and measurement methods are discussed in subsequent chapters, followed by a concluding chapter reviewing commercial and industrial products that use permanent magnets. The chapter on thermal properties of magnet materials is of particular interest, bringing together information not readily found elsewhere. The review of applications is also deserving of attention, specifically the sections on motors and actuators. Although particle accelerator applications are discussed, the use of permanent magnet sextuples in modern ECR ion sources is not mentioned

Representative Bureaucracy and the Role of Expertise in Politics

Directory of Open Access Journals (Sweden)

Jarle Trondal

2015-03-01

Full Text Available The vast majority of existing studies on bureaucratic representation focus on bureaucracies’ permanent and internal staff. Yet, the rising sophistication of modern democracies and the technocratization of political life are gradually inducing an increased reliance on external experts to assist in the development and implementation of policy decisions. This trend, we argue, raises the need to extend studies of bureaucratic representation to such external and non-permanent experts in governmental affairs. In this article, we take a first step in this direction using seconded national experts (SNEs in the European Commission as our empirical laboratory. Our results highlight that Commission SNEs do not appear representative of their constituent population (i.e., the EU-27 population along a number of socio-demographic dimensions. Moreover, we find that the role perception of “experts” is primarily explained by organizational affiliation, and only secondarily by demographic characteristics (except, of course, education.

Communication dated 2 February 2006 received from the Permanent Mission of the Islamic Republic of Iran to the Agency

International Nuclear Information System (INIS)

2006-01-01

The Secretariat has received a Note Verbale dated 2 February 2006 from the Permanent Mission of the Islamic Republic of Iran (Iran), attaching a letter to the Director General from the Resident Representative of Iran, conveying the text of a message to the Director General from Dr. Larijani, Secretary of the Supreme Security Council of Iran. The Note Verbale and, in accordance with the request of the Permanent Mission, its attachment are reproduced herein for the information of Member States

Communication dated 26 September 2008, copied to the Agency by the Permanent Mission of India regarding the Middle East and South Asia area

International Nuclear Information System (INIS)

2008-01-01

The Secretariat has received a copy of a communication dated 26 September 2008 from the Permanent Mission of India to the Permanent Mission of Kazakhstan regarding the Middle East and South Asia Area. As requested by the Resident Representative of India to the Agency, during the meeting of the Board of Governors on 6 October 2008, the communication is herewith circulated for information

Cylindrical Hall Thrusters with Permanent Magnets

International Nuclear Information System (INIS)

Raitses, Yevgeny; Merino, Enrique; Fisch, Nathaniel J.

2010-01-01

The use of permanent magnets instead of electromagnet coils for low power Hall thrusters can offer a significant reduction of both the total electric power consumption and the thruster mass. Two permanent magnet versions of the miniaturized cylindrical Hall thruster (CHT) of different overall dimensions were operated in the power range of 50W-300 W. The discharge and plasma plume measurements revealed that the CHT thrusters with permanent magnets and electromagnet coils operate rather differently. In particular, the angular ion current density distribution from the permanent magnet thrusters has an unusual halo shape, with a majority of high energy ions flowing at large angles with respect to the thruster centerline. Differences in the magnetic field topology outside the thruster channel and in the vicinity of the channel exit are likely responsible for the differences in the plume characteristics measured for the CHTs with electromagnets and permanent magnets. It is shown that the presence of the reversing-direction or cusp-type magnetic field configuration inside the thruster channel without a strong axial magnetic field outside the thruster channel does not lead to the halo plasma plume from the CHT.

Macroscopic simulation of isotropic permanent magnets

International Nuclear Information System (INIS)

Bruckner, Florian; Abert, Claas; Vogler, Christoph; Heinrichs, Frank; Satz, Armin; Ausserlechner, Udo; Binder, Gernot; Koeck, Helmut; Suess, Dieter

2016-01-01

Accurate simulations of isotropic permanent magnets require to take the magnetization process into account and consider the anisotropic, nonlinear, and hysteretic material behaviour near the saturation configuration. An efficient method for the solution of the magnetostatic Maxwell equations including the description of isotropic permanent magnets is presented. The algorithm can easily be implemented on top of existing finite element methods and does not require a full characterization of the hysteresis of the magnetic material. Strayfield measurements of an isotropic permanent magnet and simulation results are in good agreement and highlight the importance of a proper description of the isotropic material. - Highlights: • Simulations of isotropic permanent magnets. • Accurate calculation of remanence magnetization and strayfield. • Comparison with strayfield measurements and anisotropic magnet simulations. • Efficient 3D FEM–BEM coupling for solution of Maxwell equations.

Reactor safety review of permanent changes

International Nuclear Information System (INIS)

Lam, K.F.

1997-01-01

Operational compliance engineers review all changes as part of a change control process. Each change, permanent or temporary, is required to undergo an intricate review process to ensure that the benefits associated with the change outweigh the risk. For permanent changes, it is necessary to ensure that the proposed design meets the nuclear safety requirements, conforms to the licensing requirements and complies with regulatory requirements. In addition, during installation of the permanent change and prior to in-service, a configuration management process is in place to align the change with operating and maintenance documents. (author)

Permanent multipole magnets with adjustable strength

International Nuclear Information System (INIS)

Halbach, K.

1983-01-01

Preceded by a short discussion of the motives for using permanent magnets in accelerators, a new type of permanent magnet for use in accelerators is presented. The basic design and most important properties of a quadrople will be described that uses both steel and permanent magnet material. The field gradient produced by this magnet can be adjusted without changing any other aspect of the field produced by this quadrupole. The generalization of this concept to produce other multipole fields, or combination of multipole fields, will also be presented

Nanocrystalline permanent magnets with enhanced properties

International Nuclear Information System (INIS)

Leonowicz, M.

2002-01-01

Parameters of permanent magnets result from the combination of intrinsic properties such as saturation magnetization, magnetic exchange, and magnetocrystalline energy, as well as microstructural parameters such as phase structure, grain size, and orientation. Reduction of grain size into nanocrystalline regime (∼ 50 nm) leads to the enhanced remanence which derives from ferromagnetic exchange coupling between highly refined grains. In this study the fundamental phenomena, quantities, and structure parameters, which define nanophase permanent magnets are presented and discussed. The theoretical considerations are confronted with experimental data for nanocrystalline Sm-Fe-N type permanent magnets. (author)

Permanent multipole magnets with adjustable strength

International Nuclear Information System (INIS)

Halbach, K.

1983-03-01

Preceded by a short discussion of the motives for using permanent magnets in accelerators, a new type of permanent magnet for use in accelerators is presented. The basic design and most important properties of a quadrupole will be described that uses both steel and permanent magnet material. The field gradient produced by this magnet can be adjusted without changing any other aspect of the field produced by this quadrupole. The generalization of this concept to produce other multipole fields, or combination of multipole fields, will also be presented

Object permanence in common marmosets (Callithrix jacchus).

Science.gov (United States)

Mendes, Natacha; Huber, Ludwig

2004-03-01

A series of 9 search tasks corresponding to the Piagetian Stages 3-6 of object permanence were administered to 11 common marmosets (Callithrix jacchus). Success rates varied strongly among tasks and marmosets, but the performances of most subjects were above chance level on the majority of tasks of visible and invisible displacements. Although up to 24 trials were administered in the tests, subjects did not improve their performance across trials. Errors were due to preferences for specific locations or boxes, simple search strategies, and attentional deficits. The performances of at least 2 subjects that achieved very high scores up to the successive invisible displacement task suggest that this species is able to represent the existence and the movements of unperceived objects. ((c) 2004 APA, all rights reserved)

CERN welcomes the Spanish Vice-President

CERN Multimedia

Anaïs Schaeffer

2015-01-01

On 29 September, CERN had the pleasure of welcoming the Vice-President of the Government of Spain, Soraya Sáenz de Santamaría, for a visit of the Laboratory.   From left to right: Lluis Miralles (Head of the General Infrastructure Services department), Soraya Sáenz de Santamaría (Vice-President of the Government of Spain) and José Miguel Jiménez (Head of the Technology department).   The Vice-President was accompanied by Carmen Vela, Spanish Secretary of State for Research, Development and Innovation, Bernardo de Sicart Escoda, Ambassador of Spain to Switzerland, and Ana Menéndez Pérez, Permanent Representative of Spain to the United Nations and International Organizations in Geneva. Their tour started at LHC Point 1, where CERN Director-General Rolf Heuer welcomed them and gave them an introduction to CERN's activities. Jos&ea...

Impulsive control of permanent magnet synchronous motors with parameters uncertainties

International Nuclear Information System (INIS)

Li Dong; Zhang Xiaohong; Wang Shilong; Yan Dan; Wang Hui

2008-01-01

The permanent magnet synchronous motors (PMSMs) may have chaotic behaviours for the uncertain values of parameters or under certain working conditions, which threatens the secure and stable operation of motor-driven. It is important to study methods of controlling or suppressing chaos in PMSMs. In this paper, robust stabilities of PMSM with parameter uncertainties are investigated. After the uncertain matrices which represent the variable system parameters are formulated through matrix analysis, a novel asymptotical stability criterion is established. Some illustrated examples are also given to show the effectiveness of the obtained results

Introduction to permanent magnets

International Nuclear Information System (INIS)

Zijlstra, H.

1985-01-01

Some general considerations concerning the application of permanent magnets are developed. The relevant magnet properties are discussed, with particular reference to Nd-Fe-B alloy. The author comes to the following conclusions; the air gap field B should be high, for high electrical efficiency; the magnet should face the air gap, for efficient use of the magnet material; the magnet material should therefore have a high remanence; and the new Nd-Fe-B magnet fits in nicely, having (potentially) the highest remanence ever reported in permanent magnets, combined with sufficient coercivity to sustain it

Permanent education

International Nuclear Information System (INIS)

Gardien, S.; Kirsch, R.

1998-01-01

The permanent education of the IPN-Lyon inscribes itself completely in the priorities of the tri-annual plan of education of CNRS. These priorities contribute to evolution of research, evaluation of the professions, integration during the professional carriers of the personnel and form the frame for new management practice implementation

Transient or permanent fisheye views

DEFF Research Database (Denmark)

Jakobsen, Mikkel Rønne; Hornbæk, Kasper

2012-01-01

Transient use of information visualization may support specific tasks without permanently changing the user interface. Transient visualizations provide immediate and transient use of information visualization close to and in the context of the user’s focus of attention. Little is known, however......, about the benefits and limitations of transient visualizations. We describe an experiment that compares the usability of a fisheye view that participants could call up temporarily, a permanent fisheye view, and a linear view: all interfaces gave access to source code in the editor of a widespread...... programming environment. Fourteen participants performed varied tasks involving navigation and understanding of source code. Participants used the three interfaces for between four and six hours in all. Time and accuracy measures were inconclusive, but subjective data showed a preference for the permanent...

Permanent molars: Delayed development and eruption

Directory of Open Access Journals (Sweden)

Arathi R

2006-05-01

Full Text Available Delayed development and eruption of all the permanent molars is a rare phenomenon, which can cause disturbance in the developing occlusion. The eruption of permanent first and second molars is very important for the coordination of facial growth and for providing sufficient occlusal support for undisturbed mastication. In the case described, the first permanent molars were delayed in their development and were seen erupting at the age of nine and a half years. Severe disparity between the left and the right side of the dentition with respect to the rate of development of molars were also present.

MODELES ET CALCUL DES SYSTEMES DE SUSPENSION MAGNETIQUE PASSIVE -DEVELOPPEMENTS ET CALCULS ANALYTIQUES EN 2D ET 3D DES INTERACTIONS ENTRE AIMANTS PERMANENTS-

OpenAIRE

Allag , Hicham

2010-01-01

The passive magnetic suspensions operate using attractive or repulsive forces exerted between permanent magnets. After giving an overview of different possible configurations of magnetic suspensions, the calculation of interactions between permanent magnets was developed. The calculations are realised for parallelepipeds magnets, where the magnetization is represented by distributions of charges or poles (Coulombian approach). All interactions (energy, forces, torques, etc ....) was calculate...

Problema Basarabiei reflectată în rapoartele ambasadorului francez la Petersburg Charles Auguste de Morny (1856-1857 / Bessarabian question reflected in the reports of the French ambassador in Petersburg Charles Auguste de Morny (1856-1857

Directory of Open Access Journals (Sweden)

Eugen-Tudor Sclifos

2016-10-01

Full Text Available After the Crimean War the Bessarabian question had an important place in the foreign policy of the Great Powers. During the preliminaries of peace in 1855 it was decided that Russia should cede Southern Bessarabia to the Principality of Moldavia. Russia, of course, did not accept this point and at the Congress of Paris proposed a territorial exchange - the condition unacceptable to British diplomats. Thus it was created a commission to study the problem of border delimitation in Bessarabia. In August 1856, Charles Auguste de Morny, half-brother of Emperor Napoleon III, was appointed Ambassador to St. Petersburg. Count de Morny was significantly involved in the solution of the Bessarabian question. According to documents from the archives of foreign policy in Paris, the diplomat was obsessed with the idea that Southern Bessarabia must remain part of the Russian Empire and tried to convince the Emperor Napoleon III and Count Walewski that France should support the Russian point of view. De Morny had a rival, Count Persigny, the French Ambassador in London, who believed that this area should be part of the Principality of Moldavia. After long negotiations the Bessarabian question was resolved not in favor of Russia.

Superconducting permanent magnets

International Nuclear Information System (INIS)

Wipf, S.L.; Laquer, H.L.

1989-01-01

The concept of superconducting permanent magnets with fields trapped in shells or cylinders of Type II superconductors is an old one. Unfortunately, the low values of 0.5 to 1T for the first flux jump field, which is independent of the actual current density, have frustrated its implementation with classical Type II superconductors. The fact that the flux jump fields for high temperature superconductors should be an order of magnitude larger at liquid nitrogen temperatures allows us to reconsider these options. Analysis of the hysteresis patterns, based on the critical state model, shows that, if the dimensions are chosen so that the sample is penetrated at a field B/sub p/, which is equal to or just less than the first flux jump field, B/sub fj/, a temporarily applied field of 2B/sub fj/ will trap 0.5 B/sub fj/. Thus for a 90 K superconductor with a B/sub fj/ of 6T, a permanent field of 3 T should be trapped, with an energy product of 1.8 MJ/m/sup 3/ (225 MG . Oe). This is five times as large as for the best permanent magnet materials. The authors discuss means to verify the analysis and the limitations imposed by the low critical current densities in presently available high temperature superconductors

Signature d'un accord de coopération entre l'Equateur et le CERN

CERN Multimedia

CERN Press Office. Geneva

1999-01-01

A new Scientific and Technological Co-operation Agreement was formally signed on June 15th 1999 in Geneva by H.E. Ambassador Luis Gallegos Chiriboga of the Permanent Mission of Ecuador in Geneva and Prof. Luciano Maiani, Director General of CERN. Prof. Maiani said, "This agreement marks an important step forward in the development of our Laboratory's relationship with physicists in Latin America. We are delighted to formalize our contacts with the scientific community in Ecuador."

SOFIA Technology: The NASA Airborne Astronomy Ambassador (AAA) Experience and Online Resources

Science.gov (United States)

Clark, C.; Harman, P. K.; Backman, D. E.

2016-12-01

SOFIA, an 80/20 partnership of NASA and the German Aerospace Center (DLR), consists of a modified Boeing 747SP carrying a reflecting telescope with an effective diameter of 2.5 meters. SOFIA is the largest airborne observatory in the world, capable of observations impossible for even the largest and highest ground-based telescopes. The SOFIA Program Office is at NASA ARC, Moffett Field, CA; the aircraft is based in Palmdale, CA. During its planned 20-year lifetime, SOFIA will foster development of new scientific instrumentation and inspire the education of young scientists and engineers. Astrophysicists are awarded time on SOFIA to study many kinds of astronomical objects and phenomena. Among the most interesting are: Star birth, evolution, and death Formation of new planetary systems Chemistry of complex molecules in space Planet and exoplanet atmospheres Galactic gas & dust "ecosystems" Environments around supermassive black holes SOFIA currently has eight instruments, five US-made and three German. The instruments — cameras, spectrometers, and a photometer,— operate at near-, mid- and far-infrared wavelengths, each spectral range being best suited to studying particular celestial phenomena. NASA's Airborne Astronomy Ambassadors' (AAAs) experience includes a STEM immersion component. AAAs are onboard during two overnight SOFIA flights that provide insight into the acquisition of scientific data as well as the interfaces between the telescope, instrument, & aircraft. AAAs monitor system performance and view observation targets from their dedicated workstation during flights. Future opportunities for school district partnerships leading to selection of future AAA cohorts will be offered in 2018-19. AAAs may access public archive data via the SOFIA Data Cycle System (DCS) https://dcs.sofia.usra.edu/. Additional SOFIA science and other resources are available at: www.sofia.usra.edu, including lessons that use photovoltaic circuits, and other technology for the

Lawful Permanent Residents Fiscal Year 2011 Country

Data.gov (United States)

Department of Homeland Security — Lawful permanet residents (LPRs) are foreign nationals who have been gratned the right to reside permanently in the United States. LPRs are also known as 'permanent...

Permanent magnet design for high-speed superconducting bearings

Science.gov (United States)

Hull, John R.; Uherka, Kenneth L.; Abdoud, Robert G.

1996-01-01

A high temperature superconducting bearing including a permanent magnet rotor levitated by a high temperature superconducting structure. The rotor preferably includes one or more concentric permanent magnet rings coupled to permanent magnet ring structures having substantially triangular and quadrangular cross-sections. Both alternating and single direction polarity magnet structures can be used in the bearing.

Permanent magnet design for high-speed superconducting bearings

International Nuclear Information System (INIS)

Hull, J.R.; Uherka, K.L.; Abdoud, R.G.

1996-01-01

A high temperature superconducting bearing including a permanent magnet rotor levitated by a high temperature superconducting structure is disclosed. The rotor preferably includes one or more concentric permanent magnet rings coupled to permanent magnet ring structures having substantially triangular and quadrangular cross-sections. Both alternating and single direction polarity magnet structures can be used in the bearing. 9 figs

Safety effects of permanent running lights for bicycles

DEFF Research Database (Denmark)

Madsen, Jens Chr. Overgaard; Andersen, T.; Lahrmann, Harry

2013-01-01

, including all recorded bicycle accidents with personal injury to the participating cyclist, is 19% lower for cyclists with permanent running lights mounted; indicating that the permanent bicycle running light significantly improves traffic safety for cyclists. The study shows that use of permanent bicycle......Making the use of daytime running lights mandatory for motor vehicles is generally documented to have had a positive impact upon traffic safety. Improving traffic safety for bicyclists is a focal point in the road traffic safety work in Denmark. In 2004 and 2005 a controlled experiment including...... 3845 cyclists was carried out in Odense, Denmark in order to examine, if permanent running lights mounted to bicycles would improve traffic safety for cyclists. The permanent running lights were mounted to 1845 bicycles and the accident rate was recorded through 12 months for this treatment group...

An evaluation of alternative stator lamination materials for a high-speed, 1.5 MW, permanent magnet generator

NARCIS (Netherlands)

Paulides, J.J.H.; Jewell, G.W.; Howe, D.

2004-01-01

The influence of the choice of stator lamination material on the iron loss in a high speed, high power permanent magnet generator, which is interfaced to a DC link via a simple bridge rectifier, is investigated. The rating of the generator is representative of machines which would be employed in

Communication dated 13 January 2006 received from the Permanent Missions of France, Germany and the United Kingdom to the Agency

International Nuclear Information System (INIS)

2006-01-01

The Chairman of the Board of Governors received on 16 January 2006 a communication dated 13 January 2006, copied to the Director General, from the Permanent Missions of France, Germany and the United Kingdom, enclosing a statement issued on the occasion of the meeting on 12 January 2006 in Berlin of the Foreign Ministers of France, Germany and the United Kingdom and the High Representative of the European Union. The communication from the Permanent Missions and, as requested therein, the text of the statement, are herewith attached for the information of all Member States

Communication dated 2 August 2005 received from the Permanent Missions of France, Germany and the United Kingdom to the Agency

International Nuclear Information System (INIS)

2005-01-01

The Director General received on 2 August 2005 a communication from the Permanent Missions of France, Germany and the United Kingdom, dated 2 August 2005, attaching the text of a letter sent by the Ministers of Foreign Affairs of France, Germany and the United Kingdom, and the High Representative of the European Union, to the Secretary of the Supreme National Security Council of the Islamic Republic of Iran. The communication from the Permanent Missions and, as requested therein, the text of the letter, are herewith attached for the information of all Member States

Permanent vegetation quadrats on Olkiluoto island. Establishment and results from the first inventory

Energy Technology Data Exchange (ETDEWEB)

Huhta, A.P.; Korpela, L. [Finnish Forest Research Institute, Helsinki (Finland)

2006-05-15

This report describes in detail the vegetation quadrats established inside the permanent, follow-up sample plots (Forest Extensive High-level monitoring plots, FEH) on Olkiluoto Island. During summer 2005 a total of 94 sample plots (a 30 m{sup 2}), each containing eight quadrats (a 1m{sup 2}), were investigated. The total number of sampled quadrats was 752. Seventy of the 94 plots represent coniferous stands: 57 Norway spruce-dominated and 13 Scots pine-dominated stands. Ten of the plots represent deciduous, birch-dominated (Betula spp.) stands, 7 plots common alder-dominated (Alnus glutinosa) stands, and seven plots are mires. The majority of the coniferous tree stands were growing on sites representing various succession stages of the Myrtillus, Vaccinium-Myrtillus and Deschampsia-Myrtillus forest site types. The pine-dominated stands growing on exposed bedrock clearly differed from the other coniferous stands: the vegetation was characterised by the Cladina, Calluna-Cladina and Empetrum-Vaccinium vitis-idaea/Vaccinium Myrtillus forest site types. The deciduous stands were characterized by tall grasses, especially Calamagrostis epigejos, C. purpurea and Deschampsia flexuosa. The vegetation of the deciduous stands dominated by common alder represented grove-like sites and seashore groves. Typical species for mires included Calamagrostis purpurea, Calla palustris, Equisetum sylvaticum, and especially white mosses (Sphagnum spp.). A total of 184 vascular plant species were found growing within the quadrats. Due to the high number of quadrats in these forests, the spruce stands had the highest total number of species, but the birch and alder-dominated forests had the highest average number of species per quadrat. This basic inventory of the permanent vegetation quadrats on Olkiluoto Island provides a sound starting point for future vegetation surveys. Guidelines for future inventories and supplementary sampling are given in the discussion part of this report. (orig.)

Permanent vegetation quadrats on Olkiluoto island. Establishment and results from the first inventory

International Nuclear Information System (INIS)

Huhta, A.P.; Korpela, L.

2006-05-01

This report describes in detail the vegetation quadrats established inside the permanent, follow-up sample plots (Forest Extensive High-level monitoring plots, FEH) on Olkiluoto Island. During summer 2005 a total of 94 sample plots (a 30 m 2 ), each containing eight quadrats (a 1m 2 ), were investigated. The total number of sampled quadrats was 752. Seventy of the 94 plots represent coniferous stands: 57 Norway spruce-dominated and 13 Scots pine-dominated stands. Ten of the plots represent deciduous, birch-dominated (Betula spp.) stands, 7 plots common alder-dominated (Alnus glutinosa) stands, and seven plots are mires. The majority of the coniferous tree stands were growing on sites representing various succession stages of the Myrtillus, Vaccinium-Myrtillus and Deschampsia-Myrtillus forest site types. The pine-dominated stands growing on exposed bedrock clearly differed from the other coniferous stands: the vegetation was characterised by the Cladina, Calluna-Cladina and Empetrum-Vaccinium vitis-idaea/Vaccinium Myrtillus forest site types. The deciduous stands were characterized by tall grasses, especially Calamagrostis epigejos, C. purpurea and Deschampsia flexuosa. The vegetation of the deciduous stands dominated by common alder represented grove-like sites and seashore groves. Typical species for mires included Calamagrostis purpurea, Calla palustris, Equisetum sylvaticum, and especially white mosses (Sphagnum spp.). A total of 184 vascular plant species were found growing within the quadrats. Due to the high number of quadrats in these forests, the spruce stands had the highest total number of species, but the birch and alder-dominated forests had the highest average number of species per quadrat. This basic inventory of the permanent vegetation quadrats on Olkiluoto Island provides a sound starting point for future vegetation surveys. Guidelines for future inventories and supplementary sampling are given in the discussion part of this report. (orig.)

Nonuniform radiation damage in permanent magnet quadrupoles.

Science.gov (United States)

Danly, C R; Merrill, F E; Barlow, D; Mariam, F G

2014-08-01

We present data that indicate nonuniform magnetization loss due to radiation damage in neodymium-iron-boron Halbach-style permanent magnet quadrupoles. The proton radiography (pRad) facility at Los Alamos uses permanent-magnet quadrupoles for magnifying lenses, and a system recently commissioned at GSI-Darmsdadt uses permanent magnets for its primary lenses. Large fluences of spallation neutrons can be produced in close proximity to these magnets when the proton beam is, intentionally or unintentionally, directed into the tungsten beam collimators; imaging experiments at LANL's pRad have shown image degradation with these magnetic lenses at proton beam doses lower than those expected to cause damage through radiation-induced reduction of the quadrupole strength alone. We have observed preferential degradation in portions of the permanent magnet quadrupole where the field intensity is highest, resulting in increased high-order multipole components.

Nonuniform radiation damage in permanent magnet quadrupoles

International Nuclear Information System (INIS)

Danly, C. R.; Merrill, F. E.; Barlow, D.; Mariam, F. G.

2014-01-01

We present data that indicate nonuniform magnetization loss due to radiation damage in neodymium-iron-boron Halbach-style permanent magnet quadrupoles. The proton radiography (pRad) facility at Los Alamos uses permanent-magnet quadrupoles for magnifying lenses, and a system recently commissioned at GSI-Darmsdadt uses permanent magnets for its primary lenses. Large fluences of spallation neutrons can be produced in close proximity to these magnets when the proton beam is, intentionally or unintentionally, directed into the tungsten beam collimators; imaging experiments at LANL’s pRad have shown image degradation with these magnetic lenses at proton beam doses lower than those expected to cause damage through radiation-induced reduction of the quadrupole strength alone. We have observed preferential degradation in portions of the permanent magnet quadrupole where the field intensity is highest, resulting in increased high-order multipole components

Nonuniform radiation damage in permanent magnet quadrupoles

Energy Technology Data Exchange (ETDEWEB)

Danly, C. R.; Merrill, F. E.; Barlow, D.; Mariam, F. G. [Los Alamos National Laboratory, Los Alamos, New Mexico 87544 (United States)

2014-08-15

We present data that indicate nonuniform magnetization loss due to radiation damage in neodymium-iron-boron Halbach-style permanent magnet quadrupoles. The proton radiography (pRad) facility at Los Alamos uses permanent-magnet quadrupoles for magnifying lenses, and a system recently commissioned at GSI-Darmsdadt uses permanent magnets for its primary lenses. Large fluences of spallation neutrons can be produced in close proximity to these magnets when the proton beam is, intentionally or unintentionally, directed into the tungsten beam collimators; imaging experiments at LANL’s pRad have shown image degradation with these magnetic lenses at proton beam doses lower than those expected to cause damage through radiation-induced reduction of the quadrupole strength alone. We have observed preferential degradation in portions of the permanent magnet quadrupole where the field intensity is highest, resulting in increased high-order multipole components.

Globally Optimal Segmentation of Permanent-Magnet Systems

DEFF Research Database (Denmark)

Insinga, Andrea Roberto; Bjørk, Rasmus; Smith, Anders

2016-01-01

Permanent-magnet systems are widely used for generation of magnetic fields with specific properties. The reciprocity theorem, an energy-equivalence principle in magnetostatics, can be employed to calculate the optimal remanent flux density of the permanent-magnet system, given any objective...... remains unsolved. We show that the problem of optimal segmentation of a two-dimensional permanent-magnet assembly with respect to a linear objective functional can be reduced to the problem of piecewise linear approximation of a plane curve by perimeter maximization. Once the problem has been cast...

THE RELATIONSHIP BETWEEN OTTOMAN AND SPAIN IN THE END OF XVIIIth CENTURY / XVIII. YÜZYILIN SONUNDA OSMANLI-İSPANYA İLİSKİLERİ: İLK İSPANYOL DAİMİ ELÇİSİ DON JUAN DE BOULIGNY ÖRNEĞİ

Directory of Open Access Journals (Sweden)

Dr. Hüseyin Serdar TABAKOĞLU

2008-12-01

Full Text Available The Ottoman and Spanish empires struggled forthe control of the Mediterranean during the 16th centurybut they withdrew their forces from this conflict for otherpriorities at the end of the century. In the 17th and 18thcenturies their power decreased and classical institutionswere damaged. The Ottomans and Spanish tried torestore their former glory by reforming their institutions.The Ottomans and Spanish re-established their politicaland economic relations and signed a treaty of neutralityin 1782. Thus, the Ottomans had an important supportagainst the Russian presence in the Mediterranean.Spain, after re-establishing relations with the Ottomans,appointed their first permanent ambassador to Đstanbuland Don Juan de Bouligny started his mission in 1783.He worked to establish the embassy, find translators anddragomans, release the Spanish prisoners in theOttoman lands. After the French Revolution, a struggleoccured between the pro-French and anti-Frenchdiplomats in Đstanbul. Spain signed an alliance with theRevolutionary France in 1796, and the Spanish vesselsjoined the French armada to occupy Egypt. Boulignyordered the Spanish consulates in the Mediterranean toassist the French armada. That was why, the firstSpanish permanent representative in Đstanbul, Don Juande Bouligny was declared persona non grata and deportedin 1799. However, friendly relations with Spain waspreserved.

Armenian visit

CERN Multimedia

2003-01-01

During his visit to CERN on 4 July 2003, Karen Chshmaritian, Armenian Minister for Trade and Economic Development, toured the ATLAS experimental cavern and assembly hall. From left to right: Aram Kotzinian, from the international organization JINR from Dubna, Marzio Nessi from ATLAS, Karen Chshmaritian, Armenian Minister for Trade and Economic Development, Zohrab Mnatsakanian, Ambassador at the Permanent Mission of the Republic of Armenia to the United Nations in Geneva, Alexandre Sissakian, Vice-Director of JINR and Peter Jenni, ATLAS spokesman.

Object permanence in adults : a cross-cultural perspective

OpenAIRE

Subbotski, Eugene; Trommsdorff, Gisela

1992-01-01

Soviet and German adult subjects observed the phenomenon of object non-permanence (destruction, reconstruction, or transformation of a physical object). Both samples attributed an equal degree of probability to real existence of object non-permanence. However, Soviet subjects attributed a significantly higher probability to the existence of "religion-independent" non-permanent mysterious phenomena, (e.g., "unidentified flying objects", "abominable snowman", "Loch Ness monster") while attribut...

Generation of magnetic fields for accelerators with permanent magnets

International Nuclear Information System (INIS)

Meinander, T.

1994-01-01

Commercially available permanent magnet materials and their properties are reviewed. Advantages and disadvantages of using permanent magnets as compared to electromagnets for the generation of specific magnetic fields are discussed. Basic permanent magnet configurations in multipole magnets and insertion devices are presented. (orig.)

Spanish Visit

CERN Multimedia

2004-01-01

On 23 January, CERN welcomed a visit by Pedro Morenés Eulate, Spanish Secretary of State for Scientific and Technological Policy. He was taken on a tour of the LHC Superconducting test facility, the CMS magnet assembly hall and the civil engineering works at Point 5. After a brief presentation on the AMS (Alpha Magnetic Spectrometer) experiment, delivered by Sam Ting, and lunch hosted by Director General Robert Aymar, he continued his tour of the ATLAS assembly hall and the ISOLDE experimental hall. Pedro Morenés finished his visit by meeting with the Spanish scientific community working at CERN. From left to right: Juan-Antonio Rubio, CERN, Responsible for the Education & Communication, Technology transfer and Scientific Information groups; Gonzalo León, General Secretary of the Spanish Ministry; Joaquín Pérez-Villanueva y Tovar, Ambassador, Permanent Representative of Spain to the United Nations Office; Robert Aymar, CERN Director General; Maria-José Garcia-Borge, ISOLDE and NTOF, CSIC Madrid Tea...

France @ CERN | Come and meet 37 French companies at the 2014 “France @ CERN” Event | 1-3 December

CERN Multimedia

2014-01-01

The 13th “France @ CERN” event will take place from 1 December to 3 December 2014. Thanks to Ubifrance, the French agency for international business development, 37 French firms will have the opportunity to showcase their know-how at CERN.   These companies are looking forward to meeting you during the B2B sessions which will be held on Tuesday, 2 December (afternoon) and on Wednesday, 3 December (afternoon) in buildings 500 and 61 or at your convenience in your own office. The fair’s opening ceremony will take place on Tuesday, 2 December (morning) in the Council Chamber in the presence of Rolf Heuer, Director-General of CERN and Nicolas Niemtchinow, Ambassador, Permanent Representative of France to the United Nations in Geneva and to international organisations in Switzerland. For more information about the event and the 37 participating French firms, please visit: http://www.la-france-au-cern.com/

Members of the Science and Technology Commission, Spanish Senate visit ATLAS

CERN Multimedia

Maximilien Brice

2002-01-01

Photo 01: Members of the Science and Technology Commission, Spanish Senate, in front of a barrel toroid cryostat vessel in the ATLAS assembly hall. The air-core ATLAS barrel toroid magnet system will consist of eight large superconducting coils, each in its own vacuum vessel, built by Spanish company Felguera Construcciones Mecanicas SA under the responsibility of IFAE (Institute for High Energy Physics), Barcelona. Standing (left to right): Dr Peter Jenni, ATLAS spokesperson; Dr Manuel Aguilar-Benitez, delegate for Spain to CERN Council; Mrs Mercedes Senen, Lawyer of the Commission; Mr Alonso Arroyo, President of the Commission; Mr Ramon Antonio Socias, Second Vice-President of the Commission; Mr Francisco Xabier Albistur, Senator; H.E. Mr Joaquin Pérez-Villaneuva Y Tovar, Ambassador, Permanent Representative of Spain to the Office of the United Nations in Geneva and other international organisations in Switzerland, Spanish delegate to CERN Council; and Miguel Gomez. Seated (left to right): Mr Adolfo Abejon...

Exhibition: Life and Achievements of Maria Sklodowska-Curie

CERN Multimedia

CERN Bulletin

2011-01-01

The exhibition "Life and Achievements of Maria Sklodowska-Curie” will be held at CERN (Pas Perdus Corridor, 1st floor, building 61) from the 8 to 24 March.   It is organised under the auspices of the Ambassador R. Henczel, Permanent Representative of the Republic of Poland to the UN Office at Geneva to celebrate the 100th anniversary of the Nobel Prize in Chemistry given to Maria Sklodowska-Curie. The exhibition is also one of the events celebrating the 20th anniversary of Poland joining CERN as a Member State. Maria Sklodowska-Curie, Nobel Prize winner both in physics and chemistry, is one of the greatest scientists of Polish origin. The exhibition, consisting of 20 posters, presents her not only as a brilliant scientist, but also an exceptional woman of great heart, character and organizational talents, sensitive to contemporary problems. The authors are Mrs M. Sobieszczak-Marciniak, the director of the Maria Sklodowska-Curie Museum in Warsaw and Mrs H. Krajewska, the direct...

Dovetail spoke internal permanent magnet machine

Science.gov (United States)

Alexander, James Pellegrino [Ballston Lake, NY; EL-Refaie, Ayman Mohamed Fawzi [Niskayuna, NY; Lokhandwalla, Murtuza [Clifton Park, NY; Shah, Manoj Ramprasad [Latham, NY; VanDam, Jeremy Daniel [West Coxsackie, NY

2011-08-23

An internal permanent magnet (IPM) machine is provided. The IPM machine includes a stator assembly and a stator core. The stator core also includes multiple stator teeth. The stator assembly is further configured with stator windings to generate a stator magnetic field when excited with alternating currents and extends along a longitudinal axis with an inner surface defining a cavity. The IPM machine also includes a rotor assembly and a rotor core. The rotor core is disposed inside the cavity and configured to rotate about the longitudinal axis. The rotor assembly further includes a shaft. The shaft further includes multiple protrusions alternately arranged relative to multiple bottom structures provided on the shaft. The rotor assembly also includes multiple stacks of laminations disposed on the protrusions and dovetailed circumferentially around the shaft. The rotor assembly further includes multiple pair of permanent magnets for generating a magnetic field, which magnetic field interacts with the stator magnetic field to produce a torque. The multiple pair of permanent magnets are disposed between the stacks. The rotor assembly also includes multiple middle wedges mounted between each pair of the multiple permanent magnets.

Permanent Magnet Eddy Current Loss Analysis of a Novel Motor Integrated Permanent Magnet Gear

DEFF Research Database (Denmark)

Zhang, Yuqiu; Lu, Kaiyuan; Ye, Yunyue

2012-01-01

In this paper, a new motor integrated permanent magnet gear (MIPMG) is discussed. The focus is on eddy current loss analysis associated to permanent magnets (PMs). A convenient model of MIPMG is provided based on 2-D field-motion coupled time-stepping finite element method for transient eddy...... current analysis. The model takes the eddy current effect of PMs into account in determination of the magnetic field in the air-gap and in the magnet regions. The eddy current losses generated in the magnets are properly interpreted. Design improvements for reducing the eddy current losses are suggested...

Permanent isolation surface barrier development plan

International Nuclear Information System (INIS)

Wing, N.R.

1994-01-01

The exhumation and treatment of wastes may not always be the preferred alternative in the remediation of a waste site. In-place disposal alternatives, under certain circumstances, may be the most desirable alternatives to use in the protection of human health and the environment. The implementation of an in-place disposal alternative will likely require some type of protective covering that will provide long-term isolation of the wastes from the accessible environment. Even if the wastes are exhumed and treated, a long-term barrier may still be needed to adequately dispose of the treated wastes or any remaining waste residuals. Currently, no open-quotes provenclose quotes long-term barrier is available. The Hanford Site Permanent Isolation Surface Barrier Development Program (BDP) was organized to develop the technology needed to provide a long-term surface barrier capability for the Hanford Site. The permanent isolation barrier technology also could be used at other sites. Permanent isolation barriers use engineered layers of natural materials to create an integrated structure with redundant protective features. Drawings of conceptual permanent isolation surface barriers are shown. The natural construction materials (e.g., fine soil, sand, gravel, riprap, asphalt) have been selected to optimize barrier performance and longevity. The objective of current designs is to use natural materials to develop a maintenance-free permanent isolation surface barrier that isolates wastes for a minimum of 1,000 years by limiting water drainage to near-zero amounts; reducing the likelihood of plant, animal, and human intrusion; controlling the exhalation of noxious gases; and minimizing erosion-related problems

Permanent isolation surface barrier development plan

Energy Technology Data Exchange (ETDEWEB)

Wing, N.R.

1994-01-01

The exhumation and treatment of wastes may not always be the preferred alternative in the remediation of a waste site. In-place disposal alternatives, under certain circumstances, may be the most desirable alternatives to use in the protection of human health and the environment. The implementation of an in-place disposal alternative will likely require some type of protective covering that will provide long-term isolation of the wastes from the accessible environment. Even if the wastes are exhumed and treated, a long-term barrier may still be needed to adequately dispose of the treated wastes or any remaining waste residuals. Currently, no {open_quotes}proven{close_quotes} long-term barrier is available. The Hanford Site Permanent Isolation Surface Barrier Development Program (BDP) was organized to develop the technology needed to provide a long-term surface barrier capability for the Hanford Site. The permanent isolation barrier technology also could be used at other sites. Permanent isolation barriers use engineered layers of natural materials to create an integrated structure with redundant protective features. Drawings of conceptual permanent isolation surface barriers are shown. The natural construction materials (e.g., fine soil, sand, gravel, riprap, asphalt) have been selected to optimize barrier performance and longevity. The objective of current designs is to use natural materials to develop a maintenance-free permanent isolation surface barrier that isolates wastes for a minimum of 1,000 years by limiting water drainage to near-zero amounts; reducing the likelihood of plant, animal, and human intrusion; controlling the exhalation of noxious gases; and minimizing erosion-related problems.

Adjustable permanent magnet assembly for NMR and MRI

Science.gov (United States)

Pines, Alexander; Paulsen, Jeffrey; Bouchard, Louis S; Blumich, Bernhard

2013-10-29

System and methods for designing and using single-sided magnet assemblies for magnetic resonance imaging (MRI) are disclosed. The single-sided magnet assemblies can include an array of permanent magnets disposed at selected positions. At least one of the permanent magnets can be configured to rotate about an axis of rotation in the range of at least +/-10 degrees and can include a magnetization having a vector component perpendicular to the axis of rotation. The single-sided magnet assemblies can further include a magnet frame that is configured to hold the permanent magnets in place while allowing the at least one of the permanent magnets to rotate about the axis of rotation.

Method and apparatus for assembling permanent magnet rotors

Science.gov (United States)

Hsu, J.S.; Adams, D.J.

1999-06-22

A permanent magnet assembly for assembly in large permanent magnet motors and generators includes a two-piece carrier that can be slid into a slot in the rotor and then secured in place using a set screw. The invention also provides an auxiliary carrier device with guide rails that line up with the teeth of the rotor, so that a permanent magnet assembly can be pushed first into a slot, and then down the slot to its proper location. An auxiliary tool is provided to move the permanent magnet assembly into position in the slot before it is secured in place. Methods of assembling and disassembling the magnet assemblies in the rotor are also disclosed. 2 figs.

Corporate Policies with Permanent and Transitory Shocks

NARCIS (Netherlands)

J-P. Decamps (Jean-Paul); S. Gryglewicz (Sebastian); E. Morellec (Erwan); S. Villeneuve (Stephane)

2016-01-01

textabstractWe model the financing, cash holdings, and hedging policies of a firm facing financing frictions and subject to permanent and transitory cash flow shocks. We show that permanent and transitory shocks generate distinct, sometimes opposite, effects on corporate policies and use the model

Connecting Temporary and Permanent Organizing

DEFF Research Database (Denmark)

Stjerne, Iben Sandal; Velikova, Silviya Svejenova

2016-01-01

This paper investigates the relationship between a permanent organization and a series of temporary organizations. It draws on an in-depth study of the process through which a Danish film production company, seeking to balance innovation and persistence in a troubled industry, struggles to realize...... a novel children’s film and its sequels. The study reveals tensions at different levels as well as boundary work and boundary roles that address them, bringing in shadows of past and future projects. The study extends the understanding of the dialectic between temporary and permanent organizing...

The history of permanent magnet materials

International Nuclear Information System (INIS)

Livingston, J.D.

1990-01-01

Permanent-magnet materials play a large and growing, but largely unseen, role in today's technology. Many common devices in the home and elsewhere, including appliances, computers and printers, contain permanent-magnet motors and actuators. The growth of applications for permanent magnets results in large part from the improvements in magnetic properties, which allow the engineer to design smaller, lighter and more efficient devices. The properties of the greatest technological interest are remanence, coercivity and maximum energy product. All are non-equilibrium and high structure-sensitive. Coercivity is particularly sensitive to microstructure, while remanence is sensitive to texture (crystallographic alignment). The energy product depends on both coercivity and remanence. The more than one hundredfold increase in the available energy product in this century, and the corresponding amount of magnet required for a specific application, are shown

H.E. Dr Danilo Türk President of the Republic of Slovenia (second from right) visiting the ATLAS detector with, from left to right, Ambassador A. Logar, Spokesperson F. Gianotti, Director-General R. Heuer, First Lady B. Miklič Türk and ATLAS Slovenian national contactperson M. Mikuz.

CERN Multimedia

Maximilien Brice

2009-01-01

H.E. Dr Danilo Türk President of the Republic of Slovenia (second from right) visiting the ATLAS detector with, from left to right, Ambassador A. Logar, Spokesperson F. Gianotti, Director-General R. Heuer, First Lady B. Miklič Türk and ATLAS Slovenian national contactperson M. Mikuz.

21 September 2010 - Chairman of the Pakistan Atomic Energy Commission A. Parvez, CERN Director-General R. Heuer, Staff Association President G. Deroma, Ambassador to the UN Z. Akram (showing a symbol of the funds raised by CERN Staff for Pakistan)and Adviser for Non-Member States R. Voss.

CERN Multimedia

Maximilien Brice

2010-01-01

21 September 2010 - Chairman of the Pakistan Atomic Energy Commission A. Parvez, CERN Director-General R. Heuer, Staff Association President G. Deroma, Ambassador to the UN Z. Akram (showing a symbol of the funds raised by CERN Staff for Pakistan)and Adviser for Non-Member States R. Voss.

Conversion of a Temporary Tent with Steel Frame into a Permanent Warehouse

Science.gov (United States)

Georgescu, Mircea; Ungureanu, Viorel; Grecea, Daniel; Petran, Ioan

2017-10-01

The paper is dealing with the problem of a functional conversion (involving both architectural and structural issues) applied to the case of an industrial building. As well known, temporary tents, designed according to the European Code EN13782, represent a remarkable stake on the building market and a fast and practical solution for some situations. It is exactly the case approached by the paper, where the investor has initially decided to erect on his platform a provisional shelter for agricultural machines and subsequent staff, built of a light steel structure covered by PVC roofing and cladding. This temporary tent has been acquired from a specialized supplier in form of a series product. After using the tent for a number of years, the investor has decided to convert the existing structure from architectural and structural point of view by switching to a permanent structure designed accordingly. Important changes were thus imposed both to the architectural part (technological flows, openings, facades) and especially to the structural part where this switch imposed a re-design to the codes of permanent structures (especially as far as climatic loadings are concerned). The required architectural change implied the building of a 70 cm high concrete plinth and replacing the PVC membrane temporary roofing and cladding by permanent 60 mm thick PUR sandwich panels. Together with a new system of openings this has led to renewed facades of the buildings. As for the structural change, the required conversion has imposed a thorough checking of the existing steel structure (very slender and typical to a tent) in view of transforming it into a permanent structure. The consolidation measures of the existing galvanized steel structure are described, together with the measures applied at infrastructure level in order to implement the required conversion.

6 CFR 7.29 - Documents of permanent historical value.

Science.gov (United States)

2010-01-01

... 6 Domestic Security 1 2010-01-01 2010-01-01 false Documents of permanent historical value. 7.29... NATIONAL SECURITY INFORMATION Classified Information § 7.29 Documents of permanent historical value. The... contained in records determined to have permanent historical value under 44 U.S.C. 2107 before they are...

Laced permanent magnet quadrupole drift tube magnets

International Nuclear Information System (INIS)

Feinberg, B.; Behrsing, G.U.; Halbach, K.; Marks, J.S.; Morrison, M.E.; Nelson, D.H.

1988-10-01

A laced permanent magnet quadrupole drift tube magnet has been constructed for a proof-of-principle test. The magnet is a conventional tape-wound quadrupole electromagnet, using iron pole- pieces, with the addition of permanent magnet material (neodymium iron) between the poles to reduce the effects of saturation. The iron is preloaded with magnetic flux generated by the permanent magnet material, resulting in an asymmetrical saturation curve. Since the polarity of the quadrupole magnets in a drift tube linac is not reversed we can take advantage of this asymmetrical saturation to provide greater focusing strength. The magnet configuration has been optimized and the vanadium permendur poles needed in a conventional quadrupole have been replaced with iron poles. The use of permanent magnet material has allowed us to increase the focusing strength of the magnet by about 20% over that of a conventional tape-wound quadrupole. Comparisons will be made between this magnet and the conventional tape-wound quadrupole. 3 refs., 5 figs

Micromagnetics of rare-earth efficient permanent magnets

Science.gov (United States)

Fischbacher, Johann; Kovacs, Alexander; Gusenbauer, Markus; Oezelt, Harald; Exl, Lukas; Bance, Simon; Schrefl, Thomas

2018-05-01

The development of permanent magnets containing less or no rare-earth elements is linked to profound knowledge of the coercivity mechanism. Prerequisites for a promising permanent magnet material are a high spontaneous magnetization and a sufficiently high magnetic anisotropy. In addition to the intrinsic magnetic properties the microstructure of the magnet plays a significant role in establishing coercivity. The influence of the microstructure on coercivity, remanence, and energy density product can be understood by using micromagnetic simulations. With advances in computer hardware and numerical methods, hysteresis curves of magnets can be computed quickly so that the simulations can readily provide guidance for the development of permanent magnets. The potential of rare-earth reduced and rare-earth free permanent magnets is investigated using micromagnetic simulations. The results show excellent hard magnetic properties can be achieved in grain boundary engineered NdFeB, rare-earth magnets with a ThMn12 structure, Co-based nano-wires, and L10-FeNi provided that the magnet’s microstructure is optimized.

Decision-Makers As Messengers Of Climate Change Impacts And Ambassadors For Their Communities.

Science.gov (United States)

Boudrias, M. A.; DeBenedict, C.; Bruce, L.; Estrada, M.; Hedge, N.; Silva-Send, N. J.

2016-12-01

Over the past several years there have been many coordinated efforts to improve climate change literacy of diverse audiences. The challenge has been to balance science content with audience-specific messaging with a goal to reach solutions and build community resilience. In the San Diego Region, Climate Education Partners (CEP) has been working with business leaders, elected officials, tribal leaders, and other community leaders to develop a suite of programs and activities to enhance the channels of communication outside traditional settings. CEP has employed a multidisciplinary approach that integrates climate science, social and learning sciences and effective communication strategies to create innovative resources and new approaches to climate change communication in order to engage audiences more effectively. We have interviewed over 140 key San Diego leaders and invited them to serve as ambassadors to the project by engaging them directly in the creation of a variety of innovative educational resources as well as serving as spokespersons for outreach activities. Our program has evolved from having only scientists, educators and community practitioners serve as presenters to strategically and deliberately engaging a mix of scientists, educators and decision makers as the conveyers of key messages. Our protocol for events includes preparing all speakers in advance, researching our audience, creating a script, immediate debriefs of each activity and a qualitative and quantitative assessment of each event. Two examples of this integrated approach will show how to engage decision-makers more deeply: (1) coastal flooding tour as a place-based activity and (2) impact videos that blend climate science, local personal stories and key messages from decision makers themselves. For climate change communication to be successful in the future, we will need creative and coordinated approaches.

Variable Permanent Magnet Quadrupole

International Nuclear Information System (INIS)

Mihara, T.; Iwashita, Y.; Kyoto U.; Kumada, M.; NIRS, Chiba; Spencer, C.M.; SLAC

2007-01-01

A permanent magnet quadrupole (PMQ) is one of the candidates for the final focus lens in a linear collider. An over 120 T/m strong variable permanent magnet quadrupole is achieved by the introduction of saturated iron and a 'double ring structure'. A fabricated PMQ achieved 24 T integrated gradient with 20 mm bore diameter, 100 mm magnet diameter and 20 cm pole length. The strength of the PMQ is adjustable in 1.4 T steps, due to its 'double ring structure': the PMQ is split into two nested rings; the outer ring is sliced along the beam line into four parts and is rotated to change the strength. This paper describes the variable PMQ from fabrication to recent adjustments

U.S. Lawful Permanent Residents: Fiscal Year 2014

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs), also known as “green card” holders, are non-citizens who are lawfully authorized to live permanently within the United States.

Greek Roots to U.S. Democracy: Influence of the Greek-American Lobby over U.S. Policy toward the Former Yugoslav Republic of Macedonia

National Research Council Canada - National Science Library

Swigert, James W

1994-01-01

..., but no ambassador or embassy there to represent its interests, In contrast, major U.S. allies like Germany, the United Kingdom, and France have full diplomatic and consular ties with the FYROM...

Impulsive control for permanent magnet synchronous motors with uncertainties: LMI approach

International Nuclear Information System (INIS)

Dong, Li; Shi-Long, Wang; Xiao-Hong, Zhang; Dan, Yang

2010-01-01

A permanent magnet synchronous motor (PMSM) may have chaotic behaviours under certain working conditions, especially for uncertain values of parameters, which threatens the security and stability of motor-driven operation. Hence, it is important to study methods of controlling or suppressing chaos in PMSMs. In this paper, the stability of a PMSM with parameter uncertainties is investigated. After uncertain matrices which represent the variable system parameters are formulated through matrix analysis, a novel asymptotical stability criterion is established by employing the method of Lyapunov functions and linear matrix inequality technology. An example is also given to illustrate the effectiveness of our results. (general)

U.S. Lawful Permanent Residents: Fiscal Year 2013

Data.gov (United States)

Department of Homeland Security — A lawful permanent resident (LPR) or 'green card' recipient is defined by immigration law as a person who has been granted lawful permanent residence in the United...

Static devices with new permanent magnets

International Nuclear Information System (INIS)

Chavanne, J.; Laforest, J.; Pauthenet, R.

1987-01-01

The high remanence and coercivity of the new permanent magnet materials are of special interest in the static applications. High ordering temperature and are uniaxial anisotropy at the origin of their good permanent magnet properties are obtained in rare earth-transition metal compounds. Binary SmCo/sub 5/ and Sm/sub 2/Co/sub 17/ and ternary Nd/sub 2/Fe/sub 14/B compounds are the basis materials of the best permanent magnets. new concepts of calculations of static devices with these magnets can be applied: the magnetization can be considered as ridig, the density of the surface Amperian current is constant, the relative permeability is approximately 1 and the induction calculations are linear. Examples of hexapoles with Sm-Co and NdFeB magnets are described and the performances are compared. The problems of temperature behavior and corrosion resistance are underlined

U.S. Legal Permanent Residents: Fiscal Year 2007

Data.gov (United States)

Department of Homeland Security — A legal permanent resident (LPR) or “green card” recipient is defined by immigration law as a person who has been granted lawful permanent residence in the United...

U.S. Legal Permanent Residents: Fiscal Year 2010

Data.gov (United States)

Department of Homeland Security — A legal permanent resident (LPR) or “green card” recipient is defined by immigration law as a person who has been granted lawful permanent residence in the United...

U.S. Legal Permanent Residents: Fiscal Year 2008

Data.gov (United States)

Department of Homeland Security — A legal permanent resident (LPR) or “green card” recipient is defined by immigration law as a person who has been granted lawful permanent residence in the United...

U.S. Legal Permanent Residents: Fiscal Year 2012

Data.gov (United States)

Department of Homeland Security — A legal permanent resident (LPR) or “green card” recipient is defined by immigration law as a person who has been granted lawful permanent residence in the United...

Samarium-cobalt type rare earth permanent magnets

International Nuclear Information System (INIS)

Kamat, S.V.

2014-01-01

Permanent magnets are one of the oldest and largest applications of magnetic materials and form an integral part of our modern industrial society. They belong to a special class of functional materials and are characterized for remanence (flux output from the magnet), coercivity (resistance to demagnetization) and energy product (material energy density) from the second quadrant of the magnetic hysteresis loop. The reliability, stability, size, weight, cost and performance of many electro-technical devices depend mainly on the properties of permanent magnets used in them. There are three important families of permanent magnets viz., Ferrites, Alnicos and Rare Earth Permanent Magnets (REPMs) with energy product values ranging from 3 to 50 MGOe and among the front ranking high performance REPMs, SmCo 5 , Sm 2 Co 17 type and NdFeB alloys are technologically the most important materials. They are used in a wide range of applications ranging from consumer products to very specialized areas of tele-communications, microelectronics, defence, space, avionics etc. While NdFeB has the highest energy product, Sm-Co based magnets are preferred for most critical applications where temperature stability of magnetic properties is essential because of their significantly higher Curie temperatures. In this presentation some of the key challenges associated with these Sm-Co based rare earth permanent magnets will be highlighted. (author)

Letter dated 18 October 1999 from the Permanent Representative of China to the United Nations addressed to the Secretary-General. Uphold the ABM Treaty, push forward nuclear disarmament process and promote international peace and security. General Assembly. 54. session. First Committee. Agenda item 76. General and complete disarmament

International Nuclear Information System (INIS)

1999-01-01

The document reproduces the text of the letter dated 18 October 1999 sent to the Secretary-General by the Permanent Representative of China to the United Nations in connection with the agenda item 76 (General and complete disarmament) of the 54th session of the General Assembly, First Committee. The letter expresses the position of the Chinese delegation concerning the proposed amendment of the Anti-Ballistic Missile Treaty (ABM Treaty)

La Nación Española de Roma y la embajada del comendador santiaguista Gonzalo de Beteta (1484

Directory of Open Access Journals (Sweden)

Nieto Soria, José Manuel

1998-12-01

Full Text Available Gonzalo de Beteta is considered one of the first permanent ambassadors in the history of Spain and the first such ambassador to the Holy See, After he failed in the discharge of his mission, in 1484, there occurred the intervention of the "Nación Española de Roma", taking charge of safeguarding crown interests in Rome until the new ambassador's arrival. These events would be manipulated historically and documentarily centuries later when, right in the 18th century, bourbon regalism tried to project its claims of royal patronage over Spain's national churches in Rome. This article, based upon a manuscript in the Menéndez Relay o Library in Santander, strives to tackle the description of those events and their interpretation from this biased dialogue bourbon objectives and the true events of the late 15th century.[fr] Gonzalo de Beteta est considéré comme un des premiers ambassadeurs permanents de l'histoire d'Espagne et le premier ayant assumé cette charge auprès du Saint-Siège. Son décès, survenu au cours de l'accomplissement de sa mission en 1484, donna lieu à l'intervention de la "Nación Española de Roma", chargée de la sauvegarde des intérêts royaux à Rome jusqu'à la arrivée du novel ambassadeur. Ces faits seraient manipulés historiquement et documentairement des siècles plus tard, en plein XVIIIᵉ siècle, au cours des revendications de prérogatives royales sur les églises nationales espagnoles à Rome. En s'appuyant sur un manuscrit de la Bibliothèque Menéndez y Pelayo de Santander, cet article tente d'aborder la description de ces événements et leur interprétation à partir du dialogue intéressé entre ces objectifs bourbonniens et les véritables événements de la fin du XVᵉ siècle.

Milton Friedman and the Emergence of the Permanent Income Hypothesis

OpenAIRE

Hsiang-Ke Chao

2001-01-01

The purpose of this paper is to investigate the evolution of MiltonFriedman's permanent income hypothesis from the 1940s to 1960s, andhow it became the paradigm of modern consumption theory. Modellingunobservables, such as permanent income and permanent consumption, isa long-standing issue in economics and econometrics. While theconventional approach has been to set an empirical model to make"permanent income" measurable, the historical change in the meaningof that theoretical construct is al...

Hydrogen stability of SmCo5 permanent magnet

International Nuclear Information System (INIS)

Lukin, A.; Rabinovich, Y.; Bala, H.

2001-01-01

The present work has been performed with purpose to determine the level of hydrogen stability of sintered SmCo 5 permanent magnets by means of accelerated tests, to study the effect of hydrogen on the magnetic and mechanical properties of the permanent magnets and to establish the criteria of hydrogenation level and the activation energy of this process. In addition, the effect of hydrogen on the properties of sintered SmCo 5 permanent magnets in specific conditions of exploitation and storage durability of instruments was studied

Communication from the Permanent Mission of Belarus to the International Atomic Energy Agency concerning consequences of the Chernobyl accident for Belarus

International Nuclear Information System (INIS)

2001-04-01

The Director General has received a communication dated 27 March 2001 from the Permanent Representative of Belarus to the Agency and, as requested therein, the text of a statement by the Governor for Belarus is attached hereto, for the information of Member States

Elective extractions of first permanent molars: a review

Directory of Open Access Journals (Sweden)

Melike Kiraz

2018-05-01

Full Text Available Permanent first molar teeth possess a key role in the setting-up of the occlusion, contribute significantly to the chewing function and serve as a guide for other teeth. However, it is frequently encountered that permanent first molar teeth are extracted due to the predicted negative prognoses of caries or developmental defects. As a result of the uncontrolled extraction of the permanent first molar teeth during the growth and development period, drifting of adjacent teeth, continued eruption of the opposing teeth and displacements can be seen. Furthermore, following one-sided extraction, midline deviations, oppositional tooth eruption, skeletal and dental asymmetry, unilateral chewing habits, and temporo-mandibular joint disorders may occur. To prevent these pathological conditions and to maintain the stability of the occlusal relation, it is necessary to do compensation and balancing extractions of the permanent first molar teeth on the opposite/symmetric arc, assuming mesial drag of the permanent second and third molar teeth. With such controlled-extractions, especially in Class I cases, orthodontic or prosthetic treatments, which may require extra time, cost and effort, could be prevented and a conceivable occlusion can be established.

PENGUKURAN PERMANENT EARNINGS PADA HUBUNGAN DENGAN KEBIJAKAN DIVIDEND PERUSAHAAN : REVIEW PENELITIAN

Directory of Open Access Journals (Sweden)

Wahyu Manuhara Putra

2016-02-01

Full Text Available Corporate earnings divided into a permanent component of earnings and transitory earnings will be very useful in estimating the future value of the company, that will be useful in decision making stock return. Be more relevant for investors and financial analysts in analyzing the earnings based on the permanent and transitory earnings. On permanent earnings will be more focused to get the gain from investments. One focus of research is based on this component is to test the relationship with the earnings dividend payment policy. Based on several studies obtained different results concerning the relationship with the permanent earnings dividend policy. Research that focuses on permanent earnings using two approaches to determine the accuracy of the proxy of permanent earnings. Determination of permanent earnings through the stock price and the latter by using the accounting profit.

76 FR 78698 - Proposed Revocation of Permanent Variances

Science.gov (United States)

2011-12-19

... Administration (``OSHA'' or ``the Agency'') granted permanent variances to 24 companies engaged in the... DEPARTMENT OF LABOR Occupational Safety and Health Administration [Docket No. OSHA-2011-0054] Proposed Revocation of Permanent Variances AGENCY: Occupational Safety and Health Administration (OSHA...

Permanent magnet based dipole magnets for next generation light sources

Directory of Open Access Journals (Sweden)

Takahiro Watanabe

2017-07-01

Full Text Available We have developed permanent magnet based dipole magnets for the next generation light sources. Permanent magnets are advantageous over electromagnets in that they consume less power, are physically more compact, and there is a less risk of power supply failure. However, experience with electromagnets and permanent magnets in the field of accelerators shows that there are still challenges to replacing main magnets of accelerators for light sources with permanent magnets. These include the adjustability of the magnetic field, the temperature dependence of permanent magnets, and the issue of demagnetization. In this paper, we present a design for magnets for future light sources, supported by experimental and numerical results.

23 May 2012 - Egypt Minister of Scientific Research N. Eskandar Zakhary signing the guest book with CERN Director-General R. Heuer; visiting the CMS control centre with Collaboration Deputy Spokesperson T. Camporesi and International Relations Office Adviser P. Fassnacht. Ambassador to the UN H. Badr present with young scientists M. Attia, S. Seif El Nasr and R. Wasef.

CERN Multimedia

Maximilien Brice

2012-01-01

Photo CERN-HI-1205103 15: from left to right: Ambassador to the UN H. Badr; M. Attia; R. Wasef; Minister of Scientific Research N. Eskandar Zakhary; S. Seif El Nasr and President of the Scientific Research Academy M. El Sherbiny.

Permanent tracheostomy: Its social impacts and their management ...

African Journals Online (AJOL)

Background: Upper respiratory tract obstruction resulting from bilateral recurrent laryngeal nerve damage is commonly managed with permanent tracheostomy in our environment. Objective: To evaluate the social impacts of permanent tracheostomy and its management in Ondo State, Southwest Nigeria. Materials and ...

Special-Purpose High-Torque Permanent-Magnet Motors

Science.gov (United States)

Doane, George B., III

1995-01-01

Permanent-magnet brushless motors that must provide high commanded torques and satisfy unusual heat-removal requirement are developed. Intended for use as thrust-vector-control actuators in large rocket engines. Techniques and concepts used to design improved motors for special terrestrial applications. Conceptual motor design calls for use of rotor containing latest high-energy-product rare-earth permanent magnets so that motor produces required torque while drawing smallest possible currents from power supply. Torque generated by electromagnetic interaction between stator and permanent magnets in rotor when associated electronic circuits applied appropriately temporally and spatially phased currents to stator windings. Phase relationships needed to produce commanded torque computed in response to torque command and to electronically sensed angular position of rotor relative to stator.

Modeling demagnetization effects in permanent magnet synchronous machines

NARCIS (Netherlands)

Kral, C.; Sprangers, R.L.J.; Waarma, J.; Haumer, A.; Winter, O.; Lomonova, E.

2010-01-01

This paper presents a permanent magnet model which takes temperature dependencies and demagnetization effects into account. The proposed model is integrated into a magnetic fundamental wave machine model using the model- ing language Modelica. For different rotor types permanent magnet models are

Modeling of ironless permanent magnet planar motor structures

NARCIS (Netherlands)

Boeij, de J.; Lomonova, E.A.; Vandenput, A.J.A.

2006-01-01

This paper describes an analytical model that includes end effects for ironless synchronous permanent-magnet planar actuators. Because of its flexibility, the model can be used to predict the performance of various permanent-magnet array and coil array topologies and commutation schemes. Moreover,

Communication dated 10 March 1994 received from the Permanent Mission of the Federal Republic of Yugoslavia (Serbia and Montenegro)

International Nuclear Information System (INIS)

1994-01-01

The text of the aide memoire, dated 10 March 1994, of the Permanent Mission of the Federal Republic of Yugoslavia (Serbia and Montenegro) to the IAEA is being circulated for the information of all Member States at the request of the Alternate Resident Representative of the Federal Republic of Yugoslavia (Serbia and Montenegro)

[Object permanence in children with neurological and psychomotor disorders].

Science.gov (United States)

Pisaturo, C; Frassoni, S; Borreani, A; Battaglia, F; Meruzzi, B

1995-06-01

The aim of this research was to investigate whether the development of object permanence is an available sign of the cognitive development in infants with psychomotor handicaps. Subjects consisted of 5 males, ranging in age from 12 to 33 months, with handicaps as a result of perinatal brain injury. Four were preterm infants. All of the children received psychomotor treatment. Their stage of object permanence was assessed using traditional (B-L) and non traditional test (U-H). (The children's performances on the U-H scales have an "Intrinsic validity"). Four children achieved the first stages of the development of object permanence. The acquisition of object permanence was delayed in comparison with the age-appropriated time, but it may be considered adequate in comparison with the "developmental age" (B-L). One children with severe mental and motor disorders solved no task, the findings suggest that the children with psychomotor handicaps may gain the concept of object permanence and that psychomotor treatment may assist them in the development of the concept. This performance is not age-dependent. So the acquisition of the concept of object permanence may be considered an accurate and sensitive tool for the follow-up of the sensorimotor development in the handicapped children.

Permanent magnets and its production by powder metallurgy

Directory of Open Access Journals (Sweden)

Enrique Herraiz Lalana

2018-06-01

Full Text Available In this work, the historical relationship between permanent magnets and powder metallurgy is reviewed. Powder metallurgy is a manufacturing technique based on the compaction of powders that are sintered to create a solid product. This technique was used in the production of permanent magnets for the first time in the 18th century and, nowadays, most permanent magnetic materials are manufacturing by this mean. Magnetic properties are highly dependent on the microstructure of the final product, the magnetic alignment of domains and presence of porosity, to mention a few, and powder metallurgy enables fine control of these factors.

Topology optimization for design of segmented permanent magnet arrays with ferromagnetic materials

Science.gov (United States)

Lee, Jaewook; Yoon, Minho; Nomura, Tsuyoshi; Dede, Ercan M.

2018-03-01

This paper presents multi-material topology optimization for the co-design of permanent magnet segments and iron material. Specifically, a co-design methodology is proposed to find an optimal border of permanent magnet segments, a pattern of magnetization directions, and an iron shape. A material interpolation scheme is proposed for material property representation among air, permanent magnet, and iron materials. In this scheme, the permanent magnet strength and permeability are controlled by density design variables, and permanent magnet magnetization directions are controlled by angle design variables. In addition, a scheme to penalize intermediate magnetization direction is proposed to achieve segmented permanent magnet arrays with discrete magnetization directions. In this scheme, permanent magnet strength is controlled depending on magnetization direction, and consequently the final permanent magnet design converges into permanent magnet segments having target discrete directions. To validate the effectiveness of the proposed approach, three design examples are provided. The examples include the design of a dipole Halbach cylinder, magnetic system with arbitrarily-shaped cavity, and multi-objective problem resembling a magnetic refrigeration device.

Crustal deformations at permanent GPS sites in Denmark

DEFF Research Database (Denmark)

Khan, Shfaqat Abbas; Knudsen, Per; Tscherning, Carl Christian

2005-01-01

The National Survey and Cadastre (KMS) is responsible for the geodetic definition of the reference network in Denmark. Permanent GPS stations play an important role in the monitoring and maintenance of the geodetic network. During 1998 and 1999 KMS established three permanent GPS station in Denma...

Comparing superconducting and permanent magnets for magnetic refrigeration

DEFF Research Database (Denmark)

Bjørk, Rasmus; Nielsen, Kaspar Kirstein; Bahl, C. R. H.

2016-01-01

We compare the cost of a high temperature superconducting (SC) tape-based solenoidwith a permanent magnet (PM) Halbach cylinder for magnetic refrigeration.Assuming a five liter active magnetic regenerator volume, the price of each type ofmagnet is determined as a function of aspect ratio...... of the regenerator and desiredinternal magnetic field. It is shown that to produce a 1 T internal field in theregenerator a permanent magnet of hundreds of kilograms is needed or an area ofsuperconducting tape of tens of square meters. The cost of cooling the SC solenoidis shown to be a small fraction of the cost...... of the SC tape. Assuming a cost ofthe SC tape of 6000 $/m2 and a price of the permanent magnet of 100 $/kg, thesuperconducting solenoid is shown to be a factor of 0.3-3 times more expensive thanthe permanent magnet, for a desired field from 0.5-1.75 T and the geometrical aspectratio of the regenerator...

Magnetic guns with cylindrical permanent magnets

DEFF Research Database (Denmark)

Vokoun, David; Beleggia, Marco; Heller, Luděk

2012-01-01

The motion of a cylindrical permanent magnet (projectile) inside a tubular permanent magnet, with both magnets magnetized axially, illustrates nicely the physical principles behind the operation of magnetic guns. The force acting upon the projectile is expressed semi-analytically as derivative...... of the magnetostatic interaction energy. For comparison, the forces involved are also calculated numerically using finite elements methods. Based on the conservation of the magnetostatic and kinetic energies, the exit and asymptotic velocities are determined. The derived formulas can be used to optimize the generated...... forces and motion of the inner cylindrical magnet....

Design of permanent magnet synchronous motor within minimum cost

OpenAIRE

Півняк, Геннадій Григорович; Бешта, Олександр Степанович; Фурса, Сергій Григорійович; Neuberger, Nikolaus; Nolle, N.

2010-01-01

The article describes design and simulation experience of permanent magnet synchronous motor (PMSM). The design goal is to develop PMSM of the least possible cost. For that purpose the standard induction motor stator was applied as a basic solution and permanent magnets were installed in rotor. Simulation results are presented, the dependence of efficiency and total loss on magnet material mass are obtained. The optimal value of permanent magnets is estimated for the given electric motor frame.

The M/G/1 queue with permanent customers

NARCIS (Netherlands)

Boxma, O.J.; Cohen, J.W.

1991-01-01

The authors examine an M/G/1 FCFS (first come, first served) queue with two types of customers: ordinary customers, who arrive according to a Poisson process, and permanent customers, who immediately return to the end of the queue after having received a service. The influence of the permanent

Forest structure and tree recruitment changes on a permanent historical Cinder Hills plot over a 130-Year Period

Science.gov (United States)

Jacob H. Dyer; Andrew J. Sanchez Meador; Margaret M. Moore; Jonathan D. Bakker

2008-01-01

We examined forest structure, tree recruitment, and spatial pattern over a 130-year period on cinder soils in northern Arizona. Data were collected from a 3.24 ha permanent, stem-mapped plot established in 1909. This site is unique in that it represents ponderosa pine (Pinus ponderosa Laws. var. scopulorum Engelm.) growing on black cinder soils, which are of limited...

Three-dimensional quadrupole lenses made with permanent magnets

International Nuclear Information System (INIS)

Ivanov, A.S.

1984-01-01

The performance of accelerator systems with quadrupole magnets can be improved by using permanent magnets in quadrupole lenses. This requires better methods for treating the three-dimensional nature of the magnetic fields and the nonlinear characteristics of the magnets. A numerical method is described for simulating three-dimensional magnetic fields and used to analyze quadrupole lenses and doublets with permanent magnets. The results, which are confirmed experimentally, indicate that both the quadrupole magnetic gradient and the effective field length are changed in permanent-magnet quadrupole lenses when the pole lengths and the gap between the lenses are varied while the other characteristics of the magnets remain unchanged

Some economic aspects of rare-earth permanent magnets

International Nuclear Information System (INIS)

Zijlstra, H.

1978-01-01

The commercial feasibility of RE permanent magnets is analyzed in terms of price per unit of magnetostatic energy. The availability of the raw materials is also taken into consideration. The conclusion is that RE magnets are and remain relatively expensive as compared with other permanent magnets, and will find only limited application. (author)

Performance Comparison of Permanent Magnet Linear Actuators of Different Mover Types

DEFF Research Database (Denmark)

Ritchie, Ewen; Hinov, K.; Yatchev, I.

2006-01-01

A comparative study of permanent magnet linear actuators with different location of the permanent magnet is reported. Three mover types are considered - soft magnetic mover, permanent magnet mover and hybrid mover. Force-stroke characteristics are obtained with the help of finite element models...

Ce-didymium-Fe-B sintered permanent magnets

International Nuclear Information System (INIS)

Homma, M.; Okada, M.; Sugimoto, S.

1985-01-01

Present works report the development of the low cost R-Fe-B permanent magnets. The best magnetic properties obtained in this studies are Br=13.5 kG, iHc=10.2 kOe and (BH)max=40 MGOe with an Fe-33.5wt%(5Ce-Didymium)-1wt% B alloy. Topics considered in this paper include cerium alloys, boron alloys, fabrication, capitalized cost, iron alloys, permanent magnets, and magnetic properties

Permanent Magnet Dipole for DIRAC Design Report

CERN Document Server

Vorozhtsov, Alexey

2012-01-01

Two dipole magnets including one spare unit are needed for the for the DIRAC experiment. The proposed design is a permanent magnet dipole. The design based on Sm2Co17 blocks assembled together with soft ferromagnetic pole tips. The magnet provides integrated field strength of 24.6 10-3 T×m inside the aperture of 60 mm. This Design Report summarizes the main magnetic and mechanic design parameters of the permanent dipole magnets.

A tubular flux-switching permanent magnet machine

Science.gov (United States)

Wang, J.; Wang, W.; Clark, R.; Atallah, K.; Howe, D.

2008-04-01

The paper describes a novel tubular, three-phase permanent magnet brushless machine, which combines salient features from both switched reluctance and permanent magnet machine technologies. It has no end windings and zero net radial force and offers a high power density and peak force capability, as well as the potential for low manufacturing cost. It is, therefore, eminently suitable for a variety of applications, ranging from free-piston energy converters to active vehicle suspensions.

Open H-shaped permanent magnet structure for NMR imaging

International Nuclear Information System (INIS)

Nguyen, V.; Delamare, J.; Yonnet, J.P.

1996-01-01

Since NMR imaging at low field is now technically possible, permanent magnets can replace resistive coils or superconducting magnets. This paper reviews most of NMR structures that provide an uniform field using only permanent magnets. We propose a new open H-shaped structure that is simple to manufacture. This structure has been calculated thanks to an optimization program and a calculation method we presente here. It enables to determine with a good accuracy the field created by passive systems composed by permanent magnets and ferromagnetic materials. (author)

Design and simulation of permanent magnet synchronous motor control system

Science.gov (United States)

Li, Li; Liu, Yongqiu

2018-06-01

In recent years, with the development of power electronics, microelectronics, new motor control theory and rare earth permanent magnet materials, permanent magnet synchronous motors have been rapidly applied. Permanent magnet synchronous motors have the advantages of small size, low loss and high efficiency. Today, energy conservation and environmental protection are increasingly valued. It is very necessary to study them. Permanent magnet synchronous motor control system has a wide range of application prospects in the fields of electric vehicles, ships and other transportation. Using the simulation function of MATLAB/SIMULINK, a modular design structure was used to simulate the whole system model of speed loop adjustment, current PI modulation, SVPWM (Space Vector Pulse Width Module) wave generation and double closed loop. The results show that this control method has good robustness, and this method can improve the design efficiency and shorten the system design time. In this article, the analysis of the control principle of modern permanent magnet synchronous motor and the various processes of MATLAB simulation application will be analyzed in detail. The basic theory, basic method and application technology of the permanent magnet synchronous motor control system are systematically introduced.

21 October 2008 - LHC Inauguration -Extraordinary and plenipotentiary Ambassador pf the Kingdom of the Netherlands to the UN B. J. Van Eenennaam welcomed by CERN Director-General R. Aymar, CERN Chief Scientific Officer J. Engelen and CERN Financial Officer S. Lettow and signing the electronic guest book with ATLAS engineer H. ten Kate.

CERN Multimedia

CERN Photo Service

2008-01-01

21 October 2008 - LHC Inauguration -Extraordinary and plenipotentiary Ambassador pf the Kingdom of the Netherlands to the UN B. J. Van Eenennaam welcomed by CERN Director-General R. Aymar, CERN Chief Scientific Officer J. Engelen and CERN Financial Officer S. Lettow and signing the electronic guest book with ATLAS engineer H. ten Kate.

Permanent isolation surface barrier: Functional performance

International Nuclear Information System (INIS)

Wing, N.R.

1993-10-01

This document presents the functional performance parameters for permanent isolation surface barriers. Permanent isolation surface barriers have been proposed for use at the Hanford Site (and elsewhere) to isolate and dispose of certain types of waste in place. Much of the waste that would be disposed of using in-place isolation techniques is located in subsurface structures, such as solid waste burial grounds, tanks, vaults, and cribs. Unless protected in some way, the wastes could be transported to the accessible environment via transport pathways, such as water infiltration, biointrusion, wind and water erosion, human interference, and/or gaseous release

Object permanence development in infants with motor handicaps.

Science.gov (United States)

Fetters, L

1981-03-01

This study was an investigation of the effects of a motor handicap on the development of object permanence in the young child. Motor abilities were evaluated for 12 infants aged 13 to 29 months. Based on this evaluation, the children were described as manipulators or nonmanipulators in reference to their upper extremity skills. Their stage of object permanence was assessed using traditional and nontraditional assessments. Heart rate and visual tracking were recorded during the nontraditional assessment. Heart rate did not significantly relate to visual fixation or search response. There was, however, a significant difference (p less than .02) between stage achievement with traditional testing and age-appropriate levels. There was no significant difference between the nontraditional assessment and the age-appropriate levels. In addition, there was no significant difference in the development of object permanence between infants described as manipulators and those described as nonmanipulators. The last two findings suggest that infants with motor handicaps may develop object permanence at the expected ages, according to a nontraditional assessment.

Asynchronous slip-ring motor synchronized with permanent magnets

Directory of Open Access Journals (Sweden)

Glinka Tadeusz

2017-03-01

Full Text Available The electric LSPMSM motor presented in the paper differs from standard induction motor by rotor design. The insulated start-up winding is located in slots along the rotor circumference. The winding ends are connected to the slip-rings. The rotor core contains permanent magnets. The electromechanical characteristics for synchronous operation were calculated, as were the start-up characteristics for operation with a short-circuited rotor winding. Two model motors were used for the calculations, the V-shaped Permanent Magnet (VPM – Fig. 3, and the Linear Permanent Magnet (IPM – Fig. 4, both rated at 14.5 kW. The advantages of the investigated motor are demonstrated in the conclusions.

Novel ocean energy permanent magnet linear generator buoy

Energy Technology Data Exchange (ETDEWEB)

Rhinefrank, K.; Agamloh, E.B.; Jouanne, A. von; Wallace, A.K.; Prudell, J.; Kimble, K.; Aills, J.; Schmidt, E.; Schacher, A. [School of Electrical Engineering and Computer Science, Oregon State University, Corvallis, OR 97331-3211 (United States); Chan, P.; Sweeny, B. [Department of Mechanical Engineering, Oregon State University, Corvallis, OR 97331-3211 (United States)

2006-07-15

This paper describes the research, design, construction and prototype testing process of a novel ocean energy direct drive permanent magnet linear generator buoy. The buoy employs the vertical component of the motion of ocean waves to power a linear generator. The generator consists of a permanent magnet field system (mounted on the central translator shaft) and an armature, in which the power is generated (mounted on the buoy). The translator shaft is anchored to the sea floor, and the buoy/floater moves armature coils relative to the permanent magnet translator to induce voltages. The electrical and mechanical structures of the buoy generator are provided, along with performance characteristics, including voltage, current and developed power. (author)

Two cylinder permanent magnet stirrer for liquid metals

Science.gov (United States)

Bojarevičs, A.; Baranovskis, R.; Kaldre, I.; Milgrāvis, M.; Beinerts, T.

2017-07-01

To achieve a uniform liquid metal composition and temperature distribution, stirring is often necessary for industrial processes. Here, a novel permanent magnet system for liquid melt stirring is proposed. It promises very low energy consumption and options for multiple different flow types compared to traditional travelling magnetic field inductors or mechanical stirrers. The proposed system has a simple design: it consists of two rotating permanent magnet cylinders, which are magnetized transversely to the axis of the cylinders. The experimental device was developed and tested under various regimes using GaInSn alloy in a cylindrical crucible. Aluminum stirring by permanent magnets in laboratory scale is tested, and stirring impact on directional solidification of metallic alloys is experimentally investigated.

Replacement energy, capacity, and reliability costs for permanent nuclear reactor shutdowns

International Nuclear Information System (INIS)

VanKuiken, J.C., Buehring, W.A.; Hamilton, S.; Kavicky, J.A.; Cavallo, J.D.; Veselka, T.D.; Willing, D.L.

1993-10-01

Average replacement power costs are estimated for potential permanent shutdowns of nuclear electricity-generating units. Replacement power costs are considered to include replacement energy, capacity, and reliability cost components. These estimates were developed to assist the US Nuclear Regulatory Commission in evaluating regulatory issues that potentially affect changes in serious reactor accident frequencies. Cost estimates were derived from long-term production-cost and capacity expansion simulations of pooled utility-system operations. Factors that affect replacement power cost, such as load growth, replacement sources of generation, and capital costs for replacement capacity, were treated in the analysis. Costs are presented for a representative reactor and for selected subcategories of reactors, based on estimates for 112 individual reactors

Magnetic spring based on two permanent magnets

International Nuclear Information System (INIS)

Tsivilitsin, V.Yu.; Mil'man, Yu.V.; Goncharuk, V.A.; Bondar, I.B.

2011-01-01

A new type of the magnetic spring construction 'two permanent magnets' has been considered. A mathematical expression for the estimation of a pulling-in force has been offered. This expression is verified experimentally on the produced operating magnetic spring. The theoretical and experimental data are in good accordance. A number of advantages of the magnetic spring over the construction 'permanent magnet - magnetic circuit' such as an insignificant friction force between two magnets and a higher pulling force are discussed.

Establishing a long-term permanent plot in remnant forest of Cibodas Botanic Garden, West Java

Directory of Open Access Journals (Sweden)

ZAENAL MUTAQIEN

2011-10-01

Full Text Available Mutaqien Z, Zuhri M (2011 Establishing a long-term permanent plot in remnant forest of Cibodas Botanic Garden, West Java. Biodiversitas 12: 218-224. Cibodas Botanic Garden (CBG has unique characters; almost 10% of which is forested area adjacent to the natural forest of Mt. Gede Pangrango National Park. The area is a transition between natural forest and artificial habitat which mostly consists of exotic plant species. The permanent plot in CBG was established in 2007-2009. Two hundred and eighty four units of 10x10 square meters sub-plot were established in four locations, i.e. Wornojiwo, Kompos, Jalan Akar, and Lumut forest. Vegetation analyses were conducted for trees, saplings, shrubs, and herb species. The inventory found 137 species plants consisting of 74 tree species dominated by Villebrunea rubescens (Bl. Bl. and Ostodes paniculata Bl., 30 shrub species dominated by Strobilanthes hamiltoniana (Steud., 24 herb species dominated by Cyrtandra picta Bl., 6 fern species mainly consisted of Diplazium pallidum Moore, and 3 climber species dominated by Calamus reinwardtii Mart. In comparison with the natural forest of Mt. Gede Pangrango National Park, the CBG permanent plot showed a good representative of the vegetation of lower montane forest. A regular monitoring during the successive years is needed to maintain diversity, monitor forest dynamics and anticipate the spread of invasive plant from CBG.

Effective flow performances and dialysis doses delivered with permanent catheters: a 24-month comparative study of permanent catheters versus arterio-venous vascular accesses.

Science.gov (United States)

Canaud, Bernard; Leray-Moragues, Hélène; Kerkeni, Nadia; Bosc, Jean-Yves; Martin, Katja

2002-07-01

loss of dialysis efficacy using catheters was estimated at 6%. However, in all cases Kt/Vdp values remained above the recommended values (Kt/Vdp > or = 1.2). Protein nutritional state, as well as conventional clinical and biochemical markers of dialysis adequacy, remained in the optimal range. Permanent venous catheters provide adequate haemodialysis on a long-term basis. Flow performances and dialysis doses are slightly reduced (5-6%) when compared with AVA. Regular assessment of dialysis performance is strongly recommended to assure dialysis adequacy. Lengthening dialysis time may represent a simple and efficient tool to compensate for reduced flow performances with catheter use.

Percutaneous Retrieval of Permanent Inferior Vena Cava Filters

Energy Technology Data Exchange (ETDEWEB)

Tamrazi, Anobel, E-mail: atamraz1@jhmi.edu; Wadhwa, Vibhor, E-mail: vwadhwa1@jhmi.edu; Holly, Brian, E-mail: bholly3@jhmi.edu [Johns Hopkins University School of Medicine, Division of Vascular & Interventional Radiology (United States); Bhagat, Nikhil, E-mail: nikhibhagat@gmail.com [Kaiser Permanente, Division of Vascular & Interventional Radiology (United States); Marx, Jonathan K., E-mail: jmarx9@jhmi.edu [Johns Hopkins University School of Medicine, Division of Vascular & Interventional Radiology (United States); Streiff, Michael, E-mail: mstreif@jhmi.edu [Johns Hopkins University School of Medicine, Department of Hematology (United States); Lessne, Mark L., E-mail: mlessne@gmail.com [Johns Hopkins University School of Medicine, Division of Vascular & Interventional Radiology (United States)

2016-04-15

PurposeTo evaluate the feasibility, risks, and techniques of percutaneous removal of permanent TrapEase and Simon Nitinol IVC filters.Materials and MethodsBetween August 2011 and August 2015, 12 patients (5 women, 7 men; age range, 26–75 years) underwent an attempt at percutaneous removal of permanent TrapEase (10) and Simon Nitinol (2) IVC filters due to a history of IVC filter complications or need for lifelong anticoagulation due to the filter. Medical records were reviewed for filter dwell time, presence of iliocaval deep venous thrombosis, procedural technique, and complications.ResultsFilter dwell times ranged from 7 days to 15 years (mean 5.1 years). Successful removal of permanent IVC filters was possible in 11 of 12 patients (91.6 %). In 1 patient, a chronically thrombosed IVC filter could not be removed despite laser sheath assistance, but was successfully recanalized with the PowerWire RF guidewire. In the failed retrieval attempt, a stent was placed through the chronically thrombosed IVC filter with restoration of in-line flow. One major complication of large venous groin hematoma was encountered.ConclusionsIn carefully selected patients, percutaneous removal of permanent IVC filters can be performed safely despite prolonged filter dwell times. Extraction of chronically embedded permanent IVC filters may be facilitated by jugular and femoral approaches, often with laser sheath assistance. Chronic filter thrombosis and caval scarring may increase the risk of retrieval failure.

Percutaneous Retrieval of Permanent Inferior Vena Cava Filters

International Nuclear Information System (INIS)

Tamrazi, Anobel; Wadhwa, Vibhor; Holly, Brian; Bhagat, Nikhil; Marx, Jonathan K.; Streiff, Michael; Lessne, Mark L.

2016-01-01

PurposeTo evaluate the feasibility, risks, and techniques of percutaneous removal of permanent TrapEase and Simon Nitinol IVC filters.Materials and MethodsBetween August 2011 and August 2015, 12 patients (5 women, 7 men; age range, 26–75 years) underwent an attempt at percutaneous removal of permanent TrapEase (10) and Simon Nitinol (2) IVC filters due to a history of IVC filter complications or need for lifelong anticoagulation due to the filter. Medical records were reviewed for filter dwell time, presence of iliocaval deep venous thrombosis, procedural technique, and complications.ResultsFilter dwell times ranged from 7 days to 15 years (mean 5.1 years). Successful removal of permanent IVC filters was possible in 11 of 12 patients (91.6 %). In 1 patient, a chronically thrombosed IVC filter could not be removed despite laser sheath assistance, but was successfully recanalized with the PowerWire RF guidewire. In the failed retrieval attempt, a stent was placed through the chronically thrombosed IVC filter with restoration of in-line flow. One major complication of large venous groin hematoma was encountered.ConclusionsIn carefully selected patients, percutaneous removal of permanent IVC filters can be performed safely despite prolonged filter dwell times. Extraction of chronically embedded permanent IVC filters may be facilitated by jugular and femoral approaches, often with laser sheath assistance. Chronic filter thrombosis and caval scarring may increase the risk of retrieval failure.

36 CFR 223.47 - Date of completion of permanent road construction.

Science.gov (United States)

2010-07-01

... permanent road construction. 223.47 Section 223.47 Parks, Forests, and Public Property FOREST SERVICE... Conditions and Provisions § 223.47 Date of completion of permanent road construction. (a) The date of completion of permanent road construction obligations as set forth in the Notice of Sale shall be...

Representing culture in interstellar messages

Science.gov (United States)

Vakoch, Douglas A.

2008-09-01

As scholars involved with the Search for Extraterrestrial Intelligence (SETI) have contemplated how we might portray humankind in any messages sent to civilizations beyond Earth, one of the challenges they face is adequately representing the diversity of human cultures. For example, in a 2003 workshop in Paris sponsored by the SETI Institute, the International Academy of Astronautics (IAA) SETI Permanent Study Group, the International Society for the Arts, Sciences and Technology (ISAST), and the John Templeton Foundation, a varied group of artists, scientists, and scholars from the humanities considered how to encode notions of altruism in interstellar messages . Though the group represented 10 countries, most were from Europe and North America, leading to the group's recommendation that subsequent discussions on the topic should include more globally representative perspectives. As a result, the IAA Study Group on Interstellar Message Construction and the SETI Institute sponsored a follow-up workshop in Santa Fe, New Mexico, USA in February 2005. The Santa Fe workshop brought together scholars from a range of disciplines including anthropology, archaeology, chemistry, communication science, philosophy, and psychology. Participants included scholars familiar with interstellar message design as well as specialists in cross-cultural research who had participated in the Symposium on Altruism in Cross-cultural Perspective, held just prior to the workshop during the annual conference of the Society for Cross-cultural Research . The workshop included discussion of how cultural understandings of altruism can complement and critique the more biologically based models of altruism proposed for interstellar messages at the 2003 Paris workshop. This paper, written by the chair of both the Paris and Santa Fe workshops, will explore the challenges of communicating concepts of altruism that draw on both biological and cultural models.

Standards on the permanence of recording materials

Science.gov (United States)

Adelstein, Peter Z.

1996-02-01

The permanence of recording materials is dependent upon many factors, and these differ for photographic materials, magnetic tape and optical disks. Photographic permanence is affected by the (1) stability of the material, (2) the photographic processing and (3) the storage conditions. American National Standards on the material and the processing have been published for different types of film and standard test methods have been established for color film. The third feature of photographic permanence is the storage requirements and these have been established for photographic film, prints and plates. Standardization on the permanence of electronic recording materials is more complicated. As with photographic materials, stability is dependent upon (1) the material itself and (2) the storage environment. In addition, retention of the necessary (3) hardware and (4) software is also a prerequisite. American National Standards activity in these areas has been underway for the past six years. A test method for the material which determines the life expectancy of CD-ROMs has been standardized. The problems of determining the expected life of magnetic tape have been more formidable but the critical physical properties have been determined. A specification for the storage environment of magnetic tape has been finalized and one on the storage of optical disks is being worked on. Critical but unsolved problems are the obsolescence of both the hardware and the software necessary to read digital images.

New perspectives about molecular arrangement of primary and permanent dentin

Energy Technology Data Exchange (ETDEWEB)

Sanches Borges, Ana Flavia [Department of Dental Materials at Piracicaba Dental School, State University of Campinas, Piracicaba, SP (Brazil); Andrade Bitar, Renata [Biomedical Engineering, Valley of Paraiba University (UNIVAP) (Brazil); Kantovitz, Kamila Rosamilia [Department of Pediatric Dentistry at Piracicaba Dental School, State University of Campinas, Piracicaba, SP (Brazil); Bortollazo Correr, Americo [Department of Dental Materials at Piracicaba Dental School, State University of Campinas, Piracicaba, SP (Brazil); Martin, Airton Abrahao [Biomedical Engineering Post Graduation, Valley of Paraiba University (UNIVAP) (Brazil); Puppin-Rontani, Regina Maria [Department of Pediatric Dentistry at Piracicaba Dental School, State University of Campinas, Piracicaba, SP (Brazil)], E-mail: rmpuppin@fop.unicamp.br

2007-12-30

The dentin quality of primary and permanent teeth was inspected by Fourier transformed Raman spectroscopy (FT-Raman); scanning electron microscopy/energy-dispersive spectroscopy (SEM/EDS) and hardness test. Middle dentin of crowns were reached by carbide bur abrading providing a uniform smear layer. Phosphoric acid was applied in order to simulate the etching of total etching adhesive systems. The groups were (n = 10): G1 (primary dentin smear layer); G2 (35% phosphoric acid etched primary dentin); G3 (permanent dentin smear layer); G4 (35% phosphoric acid etched permanent dentin). FT-Raman results were subjected to cluster analysis. SEM/EDS were made in order to add the data obtained by FT-Raman. The hardness data were subjected to ANOVA and Tukey test. FT-Raman showed differences among groups, either to organic or inorganic content. For the organic content, primary and permanent dentin became similar after the etching; conversely, the inorganic content showed differences for the two substrates. Hardness test showed no significant differences between primary and permanent dentin, before or after etching, but the etching decreased these values. The mineral content arrangement of primary dentin is different from permanent dentin, independently of the etching. The substrate type did no influence the hardness, but the etching decreased it.

Permanent and transitory oil volatility and aggregate investment in Malaysia

International Nuclear Information System (INIS)

Ibrahim, Mansor H.; Ahmed, Huson Joher Ali

2014-01-01

This paper investigates the relation between aggregate investment and oil volatility and its permanent and transitory components for a developing country, Malaysia. In the paper, the components generalized autoregressive conditional heteroskedasticity (CGARCH) model is utilized to decompose conditional oil volatility into permanent oil volatility and transitory oil volatility. Respectively reflecting fundamental-driven and random shifts in oil volatility, they are expected to exert differential effects on aggregate investment. Adopting a vector autoregression (VAR) framework to allow feedback effects between aggregate investment and its determinants, the paper documents evidence supporting the adverse effects of conditional oil volatility, permanent oil volatility and transitory oil volatility on aggregate investment and real output. Interestingly, contrary to the findings for the developed markets (US and OECD), the real effects of permanent oil volatility tend to be stronger. These findings are reasonably robust to variable specification and measurements in the VAR system. Hence, there is an indication that heightened oil volatility accounts for the slumps in Malaysia's aggregate investment after the Asian financial crisis. - Highlights: • Examines the role of oil volatility in Malaysia's aggregate investment. • Makes distinction between permanent and temporary volatility using CGARCH. • Both volatility components depress investment. • Permanent volatility has larger adverse effects. • Results are robust to alternative model specifications

Efficient IEC permanent-magnet motor (3 kW) - Final report; Effizienter IEC Permanent-Magnet-Motor (3 kW) - Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Lindegger, M. [Circle Motor AG, Guemligen (Switzerland); Biner, H. P.; Evequoz, B. [Haute Ecole valaisanne, Sion (Switzerland); Salathe, D. [Hochschule Luzern, Technik und Architektur, Horw (Switzerland)

2008-04-15

Efficient permanent-magnet motors achieve in the area up to 100 kW a higher efficiency than induction machines (standard motors). A simple and fast energy saving option is the exchange of inefficient standard motors. The objective of this work is to install a 3 kW permanent-magnet motor in a standard IEC housing and the optimization of the design for high efficiency. Another objective is the development and the realization of an efficient variable speed control. The efficiency of the motor and the inverter with the control system must be demonstrated by tests. These tasks have been split between Circle Motor AG and the universities of applied sciences of Valais and Lucerne. Considering high-efficiency and low manufacturing cost, a brushless DC solution was adopted. This resulted in an optimum design of the motor and the control system realized with a three-phase rectifier, a buck converter with variable DC voltage, and a three-phase inverter feeding full positive and negative current to two of the legs simultaneously. The maximum measured efficiency is about 96.5% for the inverter and 92% for the motor. With the advantage of the variable speed operation, the efficiency of the realized 3 kW permanent magnet motor together with the control system is always higher than the efficiency of a measured class EFF1 induction motor, even with a direct connection to the grid. The permanent-magnet motor is also about 10 kg lighter. The cost calculation shows that the permanent-magnet motor can be competitive with the induction motor when speed control is desired. This is also the domain with the largest potential for energy savings from variable speed pumps, compressors, fans. (author)

Learning to Live With a Permanent Intestinal Ostomy

DEFF Research Database (Denmark)

Danielsen, Anne Kjaergaard; Sørensen, Erik Elgaard; Burcharth, Kirsten

2013-01-01

The aim of the study was to explore the impact of a permanent stoma on patients' everyday lives and to gain further insight into their need for ostomy-related education.......The aim of the study was to explore the impact of a permanent stoma on patients' everyday lives and to gain further insight into their need for ostomy-related education....

Permanent-magnet material applications in particle accelerators

International Nuclear Information System (INIS)

Kraus, R.H. Jr.

1992-01-01

The modern charged particle accelerator has found application in a wide range of scientific research, industrial, medical, and defense fields. Researchers began to use permanent-magnet materials in particle accelerators soon after the invention of the alternating gradient principle, which showed that magnetic field could be used to control the transverse envelope of charged particle beams. The history of permanent-magnet use in accelerator physics and technology is outlined, current design methods and material properties of concern for particle accelerator applications are reviewed

Quality of life in rectal cancer patients with permanent colostomy in ...

African Journals Online (AJOL)

Purposes: The aim of this study was to observe the quality of life (QOL) in rectal cancer patients with permanent colostomy in different periods after operation. Methods: A 1-,3-,6-month prospective study of QOL in 51 rectal cancer patients with permanent colostomy and 50 ones without permanent colostomy was assessed ...

“France@CERN” 2016 | 3-4 October

CERN Multimedia

2016-01-01

Come and meet 37 French companies at the 2016’s edition of “France@CERN”, that will take place on October 3 and 4.   Thanks to Business France, the national agency for the international development of the French economy, 37 French firms will have the opportunity to showcase their know-how at CERN. These companies are looking forward to meeting you during the B2B sessions which are going to be held on Monday, October 3 and on Tuesday, October 4 in the buildings 500, 61 or at your convenience in your own office. The fair’s official opening ceremony is going to take place on Monday in the late afternoon in the Council’s room in the presence of Ms. Fabiola Gianotti, Director-General of CERN and Ms. Elisabeth Laurin, Ambassador, Permanent Representative of France to the United Nations in Geneva and to international organizations in Switzerland. Check out the participant list and select on the matching platform the companies you want to meet: www.la-france...

Spanish Minister of Science and Technology visits the LHC magnet test facility

CERN Multimedia

Patrice Loïez

2002-01-01

H.E. Mr Josep Piqué i Camps, Minister for Science and Technology, Spain, toured the test facility for LHC magnets in building SM18 during his visit to CERN in November. Photos 01, 02: (left to right) M. Cerrada, CERN; Francisco Giménez-Reyna, Spanish delegate to the CERN Finance Committee; G. Léon; Juan Antonio Rubio, leader of the Education and Technology Transfer division at CERN; M. Aguilar-Benitez, Spanish delegate to CERN Council; (behind) H.E. Mr Joaquin Pérez-Villanueva y Tovar, Ambassador and Permanent Representative of Spain to the United Nations in Geneva; the Minister; Manuel Delfino, leader of the Information Technology division at CERN; bodyguard; Matteo Cavalli-Sforza, ATLAS national contact physicist for Spain; Felix Rodriguez Mateos, CERN; G. Babé. Visible in the left background is one of the test benches where magnets are prepared for installation in String 2: the full-scale model of an LHC cell of the regular part of the arc. The extremity of String 2, which measures 120 m and runs the ...

Financing of permanent working capital in agriculture

Directory of Open Access Journals (Sweden)

Vučković Branko

2017-01-01

Full Text Available In this paper, we attempted to present the problem of establishing adequate structure of financing medium agricultural enterprises and to point out the necessity for permanent working capital in those agricultural enterprises which can’t cover fixed assets, long-term placements and portion of inventories (raw material and spare parts, production in process with own equity and long-term sources of financing. For the purpose of analysing adequate structure of financing medium agricultural enterprises, we will use one of the most popular methods, such as case study and ratio analysis. Results of the research show that in primary agricultural production, next to standard long-term investment loans and short-term loans for investment in agricultural production, there is a necessity for financing in the permanent working capital which could assist continuity of production process and enable conditions for more profitable business in agriculture. It also should be noted that real and book value on this level of permanent working capital differs substantially.

Permanent and temporary pacemaker implantation after orthotopic heart transplantation

Directory of Open Access Journals (Sweden)

Bacal Fernando

2000-01-01

Full Text Available PURPOSE:To determine the indication for and incidence and evolution of temporary and permanent pacemaker implantation in cardiac transplant recipients. METHODS: A retrospective review of 114 patients who underwent orthotopic heart transplantation InCor (Heart Institute USP BR between March 1985 and May 1993. We studied the incidence of and indication for temporary pacing, the relationship between pacing and rejection, the need for pemanent pacing and the clinical follow-up. RESULTS: Fourteen of 114 (12%heart transplant recipients required temporary pacing and 4 of 114 (3.5% patients required permanent pacing. The indication for temporary pacing was sinus node dysfunction in 11 patients (78.5% and atrioventricular (AV block in 3 patients (21.4%. The indication for permanent pacemaker implantation was sinus node dysfunction in 3 patients (75% and atrioventricular (AV block in 1 patient (25%. We observed rejection in 3 patients (21.4% who required temporary pacing and in 2 patients (50% who required permanent pacing. The previous use of amiodarone was observed in 10 patients (71.4% with temporary pacing. Seven of the 14 patients (50% died during follow-up. CONCLUSION: Sinus node dysfunction was the principal indication for temporary and permanent pacemaker implantation in cardiac transplant recipients. The need for pacing was related to worse prognosis after cardiac transplantation.

Comparing superconducting and permanent magnets for magnetic refrigeration

Directory of Open Access Journals (Sweden)

R. Bjørk

2016-05-01

Full Text Available We compare the cost of a high temperature superconducting (SC tape-based solenoid with a permanent magnet (PM Halbach cylinder for magnetic refrigeration. Assuming a five liter active magnetic regenerator volume, the price of each type of magnet is determined as a function of aspect ratio of the regenerator and desired internal magnetic field. It is shown that to produce a 1 T internal field in the regenerator a permanent magnet of hundreds of kilograms is needed or an area of superconducting tape of tens of square meters. The cost of cooling the SC solenoid is shown to be a small fraction of the cost of the SC tape. Assuming a cost of the SC tape of 6000 $/m2 and a price of the permanent magnet of 100 $/kg, the superconducting solenoid is shown to be a factor of 0.3-3 times more expensive than the permanent magnet, for a desired field from 0.5-1.75 T and the geometrical aspect ratio of the regenerator. This factor decreases for increasing field strength, indicating that the superconducting solenoid could be suitable for high field, large cooling power applications.

Seasonal and inter-annual variations of leaf-level photosynthesis and soil respiration in the representative ecosystems of the Okavango Delta, Botswana

NARCIS (Netherlands)

Mantlana, K.B.

2008-01-01

Seasonal and inter-annual leaf-level photosynthesis and soil respiration measurements were conducted in representative ecosystems of the Okavango Delta, Botswana, that differ in their long-term soil water content: the permanent swamp, the seasonal floodplain, the rain-fed grassland and the mopane

Rethinking infant knowledge: toward an adaptive process account of successes and failures in object permanence tasks.

Science.gov (United States)

Munakata, Y; McClelland, J L; Johnson, M H; Siegler, R S

1997-10-01

Infants seem sensitive to hidden objects in habituation tasks at 3.5 months but fail to retrieve hidden objects until 8 months. The authors first consider principle-based accounts of these successes and failures, in which early successes imply knowledge of principles and failures are attributed to ancillary deficits. One account is that infants younger than 8 months have the object permanence principle but lack means-ends abilities. To test this, 7-month-olds were trained on means-ends behaviors and were tested on retrieval of visible and occluded toys. Means-ends demands were the same, yet infants made more toy-guided retrievals in the visible case. The authors offer an adaptive process account in which knowledge is graded and embedded in specific behavioral processes. Simulation models that learn gradually to represent occluded objects show how this approach can account for success and failure in object permanence tasks without assuming principles and ancillary deficits.

Effect of the repulsive force in the HTSC-permanent magnet hybrid bearing system

International Nuclear Information System (INIS)

Ohashi, S.; Kobayashi, S.

2009-01-01

Magnetic levitation using the pinning force of the YBaCuO high-T c bulk superconductor (HTSC) materials has an advantage to achieve stable levitation without control. To increase levitation force, the HTSC-permanent magnet hybrid magnetic bearing system is introduced. A circular shaped three phase Nd-Fe-B permanent magnet is installed on the rotor, and HTSC bulk superconductor is set on the stator. The additional permanent magnet is installed under the HTSC. Repulsive force of the permanent magnet is used for levitation, and pinning force between the HTSC and permanent magnet is used for guidance force of the bearing. In this system, relationship between permanent magnet and the HTSC is important. When repulsive force of the permanent magnet is large, pinning force of superconductor is used to keep the rotor position. As a result, stability for the lateral direction is decreased with hybrid system. For levitation force, effect of the hybrid system is not observed with column HTSC. Compared with the ring HTSC results, the following thing is considered. Because there is no space that flux of one permanent magnet acts on the other one with the column HTSC configuration, interaction between two permanent magnets becomes small.

Motor Integrated Permanent Magnet Gear with a Wide Torque-Speed Range

DEFF Research Database (Denmark)

Rasmussen, Peter Omand; Matzen, Torben N.; Jahns, T. M.

2009-01-01

This paper present a new motor integrated permanent magnet gear with a wide torque-speed range. In the paper a 35 kW permanent magnet motor with a base speed of 4000 rpm and a top speed of 14000 rpm is integrated into a permanent magnetic gear with a gearing ratio of 8.67. The design process...

Permanent Magnetic System Design for the Wall-Climbing Robot

Directory of Open Access Journals (Sweden)

W. Shen

2006-01-01

Full Text Available This paper presents the design and analysis of the permanent magnetic system for a wall-climbing robot with permanent magnetic tracks. Based on the behaviour of gecko lizards, the architecture of the robot was designed and built, including the structure of the adhesion mechanism, the mechanical architecture and the anti-toppling mechanism. The permanent magnetic adhesion mechanism and the tracked locomotion mechanism were employed in this kind of wall-climbing robot. Through static and dynamic force analysis of the robot under different situations, design requirements for the adhesion mechanism were derived. Two different types of structures were put forward for the permanent magnetic units and are further discussed in this paper. These two types of structures are also analysed in detail. In addition, a finite-element method was used to verify the results of magnetic units. Finally, two wall-climbing robots, equipped with different magnetic systems described previously, are explained and their applications are discussed in this paper.

GAC-EPA : Permanence le mardi 27 février

CERN Multimedia

GAC-EPA

2018-01-01

Le GAC organise des permanences avec entretiens individuels qui se tiennent le dernier mardi de chaque mois, sauf en juillet et décembre. La prochaine permanence se tiendra le : Mardi 27 février de 13 h 30 à 16 h 00 Salle de réunion de l’Association du personnel Les permanences suivantes auront lieu les mardis 27 mars, 24 avril, 29 mai, 26 juin, 28 août, 25 septembre, 30 octobre et 27 novembre 2018. Les permanences du Groupement des Anciens sont ouvertes aux bénéficiaires de la Caisse de pensions (y compris les conjoints survivants) et à tous ceux qui approchent de la retraite. Nous invitons vivement ces derniers à s’associer à notre groupement en se procurant, auprès de l’Association du personnel, les documents nécessaires. Nous invitons vivement ces derniers à s’associer à notre groupement en se procurant, au...

Treatment of ectopic first permanent molar teeth.

Science.gov (United States)

Hennessy, Joe; Al-Awadhi, E A; Dwyer, Lian O; Leith, Rona

2012-11-01

Ectopic eruption of the first permanent molar is a relatively common occurence in the developing dentition. A range of treatment options are available to the clinician provided that diagnosis is made early. Non-treatment can result in premature exfoliation of the second primary molar, space loss and impaction of the second premolar. This paper will describe the management of ectopic first permanent molars, using clinical examples to illustrate the available treatment options. This paper is relevant to every general dental practitioner who treats patients in mixed dentition.

Methods of stabilizing a permanent maglev rotator in heart pumps and other rotary machines

Directory of Open Access Journals (Sweden)

kun-xi qian

2014-10-01

Full Text Available Permanent maglev rotator in a rotary machine could be stabilized according to the author’s experiences, by use of a non-PM (permanent magnetic force acting together with the PM force, and a non-PM bearing functioning together with the PM bearing, or a so-called gyro-effect which can stabilize all rotators including permanent maglev rotator. This paper presents both axially and radially driven permanent maglev centrifugal heart pumps, as well as a permanent maglev turbine machine and an industrially used permanent maglev centrifugal pump. In all this devices permanent maglev rotators achieve stable equilibrium by different approaches described in detail. Finally, the principle exhibition of gyro-effect and the route chart to stabilization of permanent maglev rotator are presented.

76 FR 65512 - Agency Forms Undergoing Paperwork Reduction Act Review

Science.gov (United States)

2011-10-21

... (CDC) publishes a list of information collection requests under review by the Office of Management and....gov . Send written comments to CDC Desk Officer, Office of Management and Budget, Washington, DC 20503... parents; brand ambassadors; educators; school leadership; program implementers; community representatives...

Non-Syndromic Oligodontia in permanent dentition: A case report ...

African Journals Online (AJOL)

of a syndrome. The present case report highlights a unique case of non syndromic oligodontia, with agenesis of four permanent incisors, left permanent canine and right second premolar in the mandibular arch and its management with a novel fixed functional prosthetic appliance. Prosthetic rehabilitation is an urgent need ...

Rotor for a line start permanent magnet machine

Science.gov (United States)

Melfi, Mike; Schiferl, Rich; Umans, Stephen

2017-07-11

A rotor comprises laminations with a plurality of rotor bar slots with an asymmetric arrangement about the rotor. The laminations also have magnet slots equiangularly spaced about the rotor. The magnet slots extend near to the rotor outer diameter and have permanent magnets disposed in the magnet slots creating magnetic poles. The magnet slots may be formed longer than the permanent magnets disposed in the magnets slots and define one or more magnet slot apertures. The permanent magnets define a number of poles and a pole pitch. The rotor bar slots are spaced from adjacent magnet slots by a distance that is at least 4% of the pole pitch. Conductive material is disposed in the rotor bar slots, and in some embodiments, may be disposed in the magnet slot apertures.

THE PRINCIPLE OF PERMANENCE IN A CONSUMER SOCIETY

Directory of Open Access Journals (Sweden)

A. N. Il’in

2017-01-01

Full Text Available In a consumer society dominated by the imperative that requires permanent update personal system of things (the permanence principle. The production serves not just the needs and growth needs. It focuses on production of a growing number of including the  minimum useful things, but having a prestigious status and a symbolic completeness. A comparative analysis of the companies of production and the consumer society on the basis of the dominant attitude to things. Disclosed two forms of things aging: physical deterioration and moral obsolescence. Many things advertised specially created low-quality for quick change by the user. Or the infrastructure of the fashion and advertising calls for to constantly buy new things to be always in trend, be fashionable, to emphasize their social status. The concept of modernity encompasses extremely short period of time. Today the luxury of tomorrow is becoming the norm, and novelty – archaic. There is an effect of accelerating history. Even if the needs are met, the infrastructure “discovers” new needs. Builds a causal chain: growing production and advertising production speed – creates new needs – a person consumes produce results and thus contributing to its further increase. Symbolism – not a stable characteristic of a particular product. The symbol of the fashion elite goes from one generation to the other things, none of them, not finding a permanent place of localization. Therefore, the symbolic “shelf life” of things to expire soon their physical expiration date. In terms the rapid development of technology and the emergence of new generations of products emphasizing the status is possible through the permanent acquisition of the newest gadgets. Self-presentation – a process based on the permanent use of marketable novelty. This concluded the effect of corporeal gerontophobia. Formed permanence phenomenon, which can be defined as a culture inspired by the

sizing of wind powered axial flux permanent magnet alternator using

African Journals Online (AJOL)

user

2016-10-04

Oct 4, 2016 ... Keywords: Wind-Power, Axial flux, Axial Flux Permanent Machines (AFPM), Axial Flux Permanent Magnet ... energy for power generation, a high constraint is the .... arrangements as Single-Rotor Single-Stator Structure.

9th January 2012 - Indonesian Extraordinary and Plenipotentiary Ambassador Triansyah Djani to to the United Nations, WTO and other International Organisations in Geneva signing the guest book with Head of International Relations F. Pauss and Adviser E. Tsesmelis, visiting the LHC tunnel at Point 5 and CMS underground experimental area with Collaboration Spokesperson J. Incandela.

CERN Document Server

Estelle Spirig

2012-01-01

9th January 2012 - Indonesian Extraordinary and Plenipotentiary Ambassador Triansyah Djani to to the United Nations, WTO and other International Organisations in Geneva signing the guest book with Head of International Relations F. Pauss and Adviser E. Tsesmelis, visiting the LHC tunnel at Point 5 and CMS underground experimental area with Collaboration Spokesperson J. Incandela.

Discussions on performance of two types of permanent multipole magnets

International Nuclear Information System (INIS)

Xu Jianming; Xu Qing; Yin Zhaosheng

1987-01-01

The field distributions of MMD type and MW type multipole permanent magnets are calculated by means of programme POISCR and the results are summarized and discussed in this paper. The resutls show that, considering the nonlinearity of the real demagnetization curve of permanent magnet material, the field distributions of both types of permanent magnets with the same aperature are about the same but the field strength of MW type magnet with soft iron shield is higher than that of MMD type magnet

Bilateral fusion of permanent mandibular incisors: A case report

Directory of Open Access Journals (Sweden)

Saxena A

2008-05-01

Full Text Available This case report showing a classical presentation of bilateral fusion of permanent mandibular incisors in a child patient for dental attention. Fusion defined as the merger of two adjacent tooth germs producing one tooth. These teeth may be fused by enamel, dentin, or both. The fused crown is broader than non fused adjacent teeth and thus resembles gemination. However, tooth counting reveals decreased numbers. Fused teeth are rare in the permanent dentition. The incisors are reported to be fused in primary and permanent dentition, but bilateral fusion is a rare occurrence. Hence the case report of bilateral fusion in an 11-year-old boy is presented.

Permanency analysis on human electroencephalogram signals for pervasive Brain-Computer Interface systems.

Science.gov (United States)

Sadeghi, Koosha; Junghyo Lee; Banerjee, Ayan; Sohankar, Javad; Gupta, Sandeep K S

2017-07-01

Brain-Computer Interface (BCI) systems use some permanent features of brain signals to recognize their corresponding cognitive states with high accuracy. However, these features are not perfectly permanent, and BCI system should be continuously trained over time, which is tedious and time consuming. Thus, analyzing the permanency of signal features is essential in determining how often to repeat training. In this paper, we monitor electroencephalogram (EEG) signals, and analyze their behavior through continuous and relatively long period of time. In our experiment, we record EEG signals corresponding to rest state (eyes open and closed) from one subject everyday, for three and a half months. The results show that signal features such as auto-regression coefficients remain permanent through time, while others such as power spectral density specifically in 5-7 Hz frequency band are not permanent. In addition, eyes open EEG data shows more permanency than eyes closed data.

Treatment of ectopic first permanent molar teeth.

LENUS (Irish Health Repository)

Hennessy, Joe

2012-11-01

Ectopic eruption of the first permanent molar is a relatively common occurence in the developing dentition. A range of treatment options are available to the clinician provided that diagnosis is made early. Non-treatment can result in premature exfoliation of the second primary molar, space loss and impaction of the second premolar. This paper will describe the management of ectopic first permanent molars, using clinical examples to illustrate the available treatment options. CLINICAL RELEVANCE: This paper is relevant to every general dental practitioner who treats patients in mixed dentition.

Analysis of Hall Probe Precise Positioning with Cylindrical Permanent Magnet

International Nuclear Information System (INIS)

Belicev, P.; Vorozhtsov, A.S.; Vorozhtsov, S.B.

2007-01-01

Precise positioning of a Hall probe for cyclotron magnetic field mapping, using cylindrical permanent magnets, was analyzed. The necessary permanent magnet parameters in order to achieve ±20 μm position precision, were determined. (author)

Economic viability, applications and limits of efficient permanent magnet motors - Summary and update; Wirtschaftlichkeit, Anwendungen und Grenzen von effizienten Permanent-Magnet-Motoren - Zusammenfassung und Update - Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Lindegger, M. [Circle Motor AG, Guemligen (Switzerland); Biner, H.-P.; Evequoz, B. [Hochschule Westschweiz, Delemont (Switzerland); Salathe, D. [Hochschule Luzern Technik und Architektur, Horw (Switzerland)

2009-06-15

This final report for the Swiss Federal Office of Energy (SFOE), takes a look at the economic viability, applications and limits of efficient permanent magnet motors. Permanent magnet motors are compared with standard IEC asynchronous motors. In a theoretical part of the report, it is discussed how the increasing size of the motor influences efficiency, weight, volume and power. The results of practical tests carried out on six motors are presented. Three standard motors with varying efficiency were compared with three permanent-magnet motors for the power range around 3 kW. Market-oriented considerations concerning permanent-magnet motors are discussed. Operational criteria for the choice of the type of motor to be used are also examined.

Permanent deformation and deflection relationship from pavement condition assessment

Directory of Open Access Journals (Sweden)

Fabricio Leiva-Villacorta

2017-07-01

Full Text Available The development of permanent deformation in flexible pavements has been a research topic for several decades. Currently there are models included in the structural design of pavements that can predict this type of failure. However, the variables required for the prediction of this distress are complex or difficult to obtain in the field, making its application in pavement evaluation also difficult. Measurement of the deflection of pavement structures by means of non-destructive testing is a technique used to assess the condition of the pavement. This research study seeks to correlate data from deflections of the pavement surface with probable permanent deformation in time. In addition, prediction of the remaining life of the pavement structure using a specified criterion is also analyzed. In order to accomplish these objectives, data acquired from 4 different full scale accelerated pavement test tracks was used to develop a permanent deformation model as a function of deflection, load repetitions and pavement layer thickness. The developed model considered a time series model that incorporates an Auto-regressive parameter of order 1. The proposed model presents an advantage over currently available models because it reduces the required parameters to predict the permanent deformation and/or remaining life in the structure and because these variables can be easily found and updated in a pavement management system. Keywords: HVS, Permanent deformation, Deflections, APT, Time series, Instrumentation

Permanent-magnet switched-flux machine

Science.gov (United States)

Trzynadlowski, Andrzej M.; Qin, Ling

2010-01-12

A permanent-magnet switched-flux (PMSF) device has a ferromagnetic outer stator mounted to a shaft about a central axis extending axially through the PMSF device. Pluralities of top and bottom stator poles are respectively mounted in first and second circles, radially outwardly in first and second transverse planes extending from first and second sections of the central axis adjacent to an inner surface of the ferromagnetic outer stator. A ferromagnetic inner rotor is coupled to the shaft and has i) a rotor core having a core axis co-axial with the central axis; and ii) first and second discs having respective outer edges with first and second pluralities of permanent magnets (PMs) mounted in first and second circles, radially outwardly from the rotor core axis in the first and second transverse planes. The first and second pluralities of PMs each include PMs of alternating polarity.

Lawful Permanent Residents Fiscal Year 2015 Core Based Statistical Area (CBSA) of Residence

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Lawful Permanent Residents Fiscal Year 2011 Core Based Statistical Area (CBSA) of Residence

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Lawful Permanent Residents Fiscal Year 2014 Core Based Statistical Area (CBSA) of Residence

Data.gov (United States)

Department of Homeland Security — Lawful permanent residents (LPRs) are foreign nationals who have been granted the right to reside permanently in the United States. LPRs are also known as 'permanent...

Sensorless V/f Control of Permanent Magnet Synchronous Motors

OpenAIRE

Montesinos-Miracle, Daniel; Perera, P. D. Chandana; Galceran-Arellano, Samuel; Blaabjerg, Frede

2010-01-01

V/f control strategy for permanent magnet synchronous motors can be useful for HVAC applications, where not high performance is required. Permanent magnet synchronous motors have efficiency advantages over the induction motor. But open loop V/f control is not stable in the whole frequency range. As demonstrated, the V/f control strategy becomes

Application of 125I seed permanent plantation in osseous metastases

International Nuclear Information System (INIS)

Zhang Fujun; Wu Peihong; Lu Mingjian; Li Kui; Zhang Liang; Huang Jinhua; Fan Weijun; Zhao Ming; Gu Yangkui; Liu Jian; Wang Junjie

2007-01-01

Objective: To evaluate the value of 125 I permanent plantation in treating osseous metastases. Methods: Twenty-two patients with osseous metastases were accepted radioactive seeds 125 I permanent plantation. The curative effect was appraised according to the degree of ostalgia relieving and the changing of the radiology imaging in patients. Results: Accepted radioactive seeds 125 I permanent plantation, relief of pain was obtained and the effective rate is 91% (20/22). However none of the patients showed severe side-effect. Among 32 lesions in 22 cases followed-up by CT in 2 months, 4 obtained CR, 18 obtained PR, 10 NC and 0 PD. The responsive rate was 68.7%. Conclusion: 125 I permanent plantation procedure can be a safe and effective method in treating osseous metastases and obtaining good clinical effects with minimal damage and few complications. (authors)

Method for forming permanent magnets with different polarities for use in microelectromechanical devices

Science.gov (United States)

Roesler, Alexander W [Tijeras, NM; Christenson, Todd R [Albuquerque, NM

2007-04-24

Methods are provided for forming a plurality of permanent magnets with two different north-south magnetic pole alignments for use in microelectromechanical (MEM) devices. These methods are based on initially magnetizing the permanent magnets all in the same direction, and then utilizing a combination of heating and a magnetic field to switch the polarity of a portion of the permanent magnets while not switching the remaining permanent magnets. The permanent magnets, in some instances, can all have the same rare-earth composition (e.g. NdFeB) or can be formed of two different rare-earth materials (e.g. NdFeB and SmCo). The methods can be used to form a plurality of permanent magnets side-by-side on or within a substrate with an alternating polarity, or to form a two-dimensional array of permanent magnets in which the polarity of every other row of the array is alternated.

Superconducting permanent magnets and their application in magnetic levitation

International Nuclear Information System (INIS)

Schultz, L.; Krabbes, G.; Fuchs, G.; Pfeiffer, W.; Mueller, K.H.

2002-01-01

Superconducting permanent magnets form a completely new class of permanent magnets. Of course, they must be cooled to 77 K or below. At very low temperatures (24 K) their magnetization can be a factor of 10 higher than that of the best conventional magnets, providing magnetic forces and energies which are up to two orders of magnitude higher. These new supermagnets became only recently available by the extreme improvement of the quality of melt-textured massive YBa 2 Cu 3 O x samples. Besides having a high magnetization, these superconducting permanent magnets can freeze in any given magnetic field configuration allowing completely new applications like superconducting transport systems or superconducting magnetic bearings. (orig.)

Permanent magnets for production and use of high energy particle beams

International Nuclear Information System (INIS)

Halbach, K.

1985-03-01

In the last few years, permanent magnet systems have begun to play a dominant role in the generation of synchrotron radiation and the operation of free electron lasers. Similarly, permanent magnets can lead to significant improvements of accelerators and systems that use them. The general conditions are discussed under which one can expect benefits from permanent magnets, and a number of specific applications will be described in detail

The overview and history of permanent magnet devices in accelerator technology

International Nuclear Information System (INIS)

Kraus, R.H.

1994-01-01

This paper looks at the early history of accelerator development with a particular focus on the important discoveries that opened the door for the application of permanent-magnet materials to this area of science. Researchers began to use permanent-magnet materials in particle accelerators soon after the invention of the alternating gradient principle, that showed magnetic fields could be used to control the transverse envelope of charged-particle beams. Since that time, permanent-magnet materials have found wide application in the modern charged particle accelerator. A brief history of permanent-magnet use in accelerator physics and technology is outlined, some of the general design considerations are presented, and several material properties of concern for particle accelerator applications are discussed

The overview and history of permanent magnet devices in accelerator technology

International Nuclear Information System (INIS)

Kraus, R.H. Jr.

1993-01-01

This paper reviews the early history of accelerator development with a particular focus on the important discoveries that opened the door for the application of permanent-magnet materials to this area of science. Researchers began to use permanent-magnet materials in particle accelerators soon after the invention of the alternating gradient principle, that showed magnetic fields could be used to control the transverse envelope of charged-particle beams. Since that time, permanent-magnet materials have found wide application in the modern charged particle accelerator. The history of permanent-magnet use in accelerator physics and technology is outlined, general design considerations are presented, and material properties of concern for particle accelerator applications are discussed

Development of cryogenic permanent magnet undulator

International Nuclear Information System (INIS)

Hara, Toru; Tanaka, Takashi; Shirasawa, Katsutoshi; Kitamura, Hideo; Bizen, Teruhiko; Seike, Takamitsu; Marechal, Xavier; Tsuru, Rieko; Iwaki, Daisuke

2005-01-01

A short period undulator increases not only the photon energy of undulator radiation, but also the brilliance due to its increased number of undulator periods. As a result, brilliant undulator radiation becomes available in the photon energy range, which is currently covered by wigglers. In order to develop a short period undulator, high performance magnets are indispensable and superconductive undulators have been actively investigated in recent years. In this paper, however, we propose a new approach, so called a cryogenic permanent magnet undulator using NdFeB magnets at the temperatures around 150 K. The current status of this cryogenic permanent magnet undulator development at SPring-8 is presented including the results of the magnetic field measurements on a prototype undulator. (author)

A population-based study of rectal cancer: permanent colostomy as an outcome

International Nuclear Information System (INIS)

Paszat, Lawrence F.; Brundage, Michael D.; Groome, Patti A.; Schulze, Karleen; Mackillop, William J.

1999-01-01

Purpose: The objectives of this study are to describe the utilization of surgery and of radiotherapy in the treatment of newly diagnosed rectal cancer in Ontario between 1982 and 1994, and to describe the probability of permanent colostomy at any time after the diagnosis of rectal cancer, as an outcome of the treatment of newly diagnosed rectal cancer. Methods and Materials: Electronic records of rectal cancer (International Classification of Diseases code 154) from the Ontario Cancer Registry (n = 18,695, excluding squamous, basaloid, cloacogenic, and carcinoid histology) were linked to surgical records from all Ontario hospitals, and radiotherapy (RT) records from Ontario cancer centers. Procedures occurring within 4 months of diagnosis, or within 4 months of another procedure for rectal cancer, were considered part of initial treatment. Multivariate analyses controlled for age, sex, and year of diagnosis. Results: Resection plus permanent colostomy was performed in 33.1% of cases, whereas local excision or resection without permanent colostomy was performed in 38.2%. Multivariate logistic regression demonstrated higher odds ratios (OR) for resection plus permanent colostomy in all regions of Ontario relative to Toronto. The OR for postoperative RT following local excision or resection without permanent colostomy varied among the regions relative to Toronto (e.g., OR Ottawa = 0.59, OR Hamilton 0.76, OR London = 1.25). The relative risk (RR) of colostomy conditional upon survival within 5 years from diagnosis varied among regions relative to Toronto (e.g., RR Ottawa = 1.21, RR Hamilton = 1.20). Conclusions: There is regional variation in the utilization of resection with permanent colostomy, and in the utilization of postoperative RT among cases not undergoing permanent colostomy. Regions with higher initial rates of resection plus permanent colostomy continue to experience higher probability of permanent colostomy 5 years after diagnosis of rectal cancer. Higher

Implementation of Permanent Magnet Motors in Electric Vehicles

OpenAIRE

Elvestad, Eirik

2008-01-01

This thesis has studied permanent magnet motors in electric vehicles (EVs) under the assumption that they are tractable due to a low weight and high compactness. The implementation has been investigated through a case study, which resulted in an EV simulation model. The model contains a maximal torque per ampere and a closed-loop field weakening controller. Abstract Faults are a special concern in permanent magnet motors. Fault sources and faulted behavior are addressed separately. The EV mo...

21 CFR 870.3680 - Cardiovascular permanent or temporary pacemaker electrode.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Cardiovascular permanent or temporary pacemaker... § 870.3680 Cardiovascular permanent or temporary pacemaker electrode. (a) Temporary pacemaker electrode—(1) Identification. A temporary pacemaker electrode is a device consisting of flexible insulated...

Permanently calibrated interpolating time counter

International Nuclear Information System (INIS)

Jachna, Z; Szplet, R; Kwiatkowski, P; Różyc, K

2015-01-01

We propose a new architecture of an integrated time interval counter that provides its permanent calibration in the background. Time interval measurement and the calibration procedure are based on the use of a two-stage interpolation method and parallel processing of measurement and calibration data. The parallel processing is achieved by a doubling of two-stage interpolators in measurement channels of the counter, and by an appropriate extension of control logic. Such modification allows the updating of transfer characteristics of interpolators without the need to break a theoretically infinite measurement session. We describe the principle of permanent calibration, its implementation and influence on the quality of the counter. The precision of the presented counter is kept at a constant level (below 20 ps) despite significant changes in the ambient temperature (from −10 to 60 °C), which can cause a sevenfold decrease in the precision of the counter with a traditional calibration procedure. (paper)

A Statistical Method to Predict Flow Permanence in Dryland Streams from Time Series of Stream Temperature

Directory of Open Access Journals (Sweden)

Ivan Arismendi

2017-12-01

Full Text Available Intermittent and ephemeral streams represent more than half of the length of the global river network. Dryland freshwater ecosystems are especially vulnerable to changes in human-related water uses as well as shifts in terrestrial climates. Yet, the description and quantification of patterns of flow permanence in these systems is challenging mostly due to difficulties in instrumentation. Here, we took advantage of existing stream temperature datasets in dryland streams in the northwest Great Basin desert, USA, to extract critical information on climate-sensitive patterns of flow permanence. We used a signal detection technique, Hidden Markov Models (HMMs, to extract information from daily time series of stream temperature to diagnose patterns of stream drying. Specifically, we applied HMMs to time series of daily standard deviation (SD of stream temperature (i.e., dry stream channels typically display highly variable daily temperature records compared to wet stream channels between April and August (2015–2016. We used information from paired stream and air temperature data loggers as well as co-located stream temperature data loggers with electrical resistors as confirmatory sources of the timing of stream drying. We expanded our approach to an entire stream network to illustrate the utility of the method to detect patterns of flow permanence over a broader spatial extent. We successfully identified and separated signals characteristic of wet and dry stream conditions and their shifts over time. Most of our study sites within the entire stream network exhibited a single state over the entire season (80%, but a portion of them showed one or more shifts among states (17%. We provide recommendations to use this approach based on a series of simple steps. Our findings illustrate a successful method that can be used to rigorously quantify flow permanence regimes in streams using existing records of stream temperature.

A statistical method to predict flow permanence in dryland streams from time series of stream temperature

Science.gov (United States)

Arismendi, Ivan; Dunham, Jason B.; Heck, Michael; Schultz, Luke; Hockman-Wert, David

2017-01-01

Intermittent and ephemeral streams represent more than half of the length of the global river network. Dryland freshwater ecosystems are especially vulnerable to changes in human-related water uses as well as shifts in terrestrial climates. Yet, the description and quantification of patterns of flow permanence in these systems is challenging mostly due to difficulties in instrumentation. Here, we took advantage of existing stream temperature datasets in dryland streams in the northwest Great Basin desert, USA, to extract critical information on climate-sensitive patterns of flow permanence. We used a signal detection technique, Hidden Markov Models (HMMs), to extract information from daily time series of stream temperature to diagnose patterns of stream drying. Specifically, we applied HMMs to time series of daily standard deviation (SD) of stream temperature (i.e., dry stream channels typically display highly variable daily temperature records compared to wet stream channels) between April and August (2015–2016). We used information from paired stream and air temperature data loggers as well as co-located stream temperature data loggers with electrical resistors as confirmatory sources of the timing of stream drying. We expanded our approach to an entire stream network to illustrate the utility of the method to detect patterns of flow permanence over a broader spatial extent. We successfully identified and separated signals characteristic of wet and dry stream conditions and their shifts over time. Most of our study sites within the entire stream network exhibited a single state over the entire season (80%), but a portion of them showed one or more shifts among states (17%). We provide recommendations to use this approach based on a series of simple steps. Our findings illustrate a successful method that can be used to rigorously quantify flow permanence regimes in streams using existing records of stream temperature.

New permanent magnets

Science.gov (United States)

Müller, K.-H.; Krabbes, G.; Fink, J.; Gruß, S.; Kirchner, A.; Fuchs, G.; Schultz, L.

2001-05-01

Permanent magnets play an important role and are widely spread in daily-life applications. Due to their very low costs, large availability of the row materials and their high chemical stability, hard ferrites are still dominant in the permanent magnet market although their relatively poor magnetic properties are a distinct disadvantage. Today's high-performance magnets are mostly made from Nd 2Fe 14B. The aim of research is to combine the large spontaneous magnetization of 3d metals with strong anisotropy fields known from rare-earth transition-metal compounds and, at the same time, to maintain a high value of the Curie temperature. However, the number of iron-rich rare-earth intermetallics is very limited and, consequently, not much success can be noted in this field for the last 10 years. One alternative concept is to use magnetic fields trapped in type II superconductors where much higher fields can be achieved compared to conventional rare-earth magnets. Very recently, we obtained a trapped field as high as 14.4 T in a melt-textured YBCO bulk sample of a few centimeters in diameter. This is the highest value ever achieved in a bulk superconductor. The trapped field of a superconductor is not governed by the Laplace equation and, therefore, levitation works without any additional (active) stabilization. The disadvantage of these magnets is their low working temperature (of liquid nitrogen and below).

System and method for preventing stator permanent magnet demagnetization during vacuum pressure impregnation

Science.gov (United States)

Raminosoa, Tsarafidy; Alexander, James Pellegrino; EL-Refaie, Ayman Mohamed Fawzi

2017-06-06

A permanent magnet electrical machine includes a stator having conductive windings wound thereon and one or more permanent magnets embedded in the stator. A magnetic keeper element is positioned on the stator so as to form a magnetic flux path with the permanent magnets, with the magnetic keeper element closing the magnetic flux path of the permanent magnets by providing a low reluctance flux path to magnetic flux generated by the permanent magnets. A vacuum pressure impregnation (VPI) process is performed on the stator to increase a thermal conductivity of the windings, with the VPI process including a curing step that is performed at a selected temperature. The magnetic keeper element sets an operating point of the permanent magnets to an internal flux density level above a demagnetization threshold associated with the selected temperature at which the curing step is performed.

Design and control of a superconducting permanent magnet synchronous motor

International Nuclear Information System (INIS)

Jiang, Y; Pei, R; Hong, Z; Song, J; Fang, F; Coombs, T A

2007-01-01

This paper gives a detailed description of the design of a superconducting permanent magnet synchronous motor. The parameters of the motor have been identified, and the torque equation has been stated. A direct torque control algorithm is introduced and applied to a traditional permanent magnet synchronous motor and the superconducting permanent magnet synchronous motor described in this paper. The motor performance shows that the direct torque control algorithm provides excellent control to the superconducting motor, and guarantees that the magnitude of the operational armature currents is smaller than the value of the critical current of the superconducting tape used for stator winding

Design and control of a superconducting permanent magnet synchronous motor

Energy Technology Data Exchange (ETDEWEB)

Jiang, Y [Cambridge University Engineering Department, Trumpington Street, Cambridge CB2 1PZ (United Kingdom); Pei, R [Cambridge University Engineering Department, Trumpington Street, Cambridge CB2 1PZ (United Kingdom); Hong, Z [Cambridge University Engineering Department, Trumpington Street, Cambridge CB2 1PZ (United Kingdom); Song, J [Huazhong University of Science of Technology, Wuhan 430074 (China); Fang, F [Huazhong University of Science of Technology, Wuhan 430074 (China); Coombs, T A [Cambridge University Engineering Department, Trumpington Street, Cambridge CB2 1PZ (United Kingdom)

2007-07-15

This paper gives a detailed description of the design of a superconducting permanent magnet synchronous motor. The parameters of the motor have been identified, and the torque equation has been stated. A direct torque control algorithm is introduced and applied to a traditional permanent magnet synchronous motor and the superconducting permanent magnet synchronous motor described in this paper. The motor performance shows that the direct torque control algorithm provides excellent control to the superconducting motor, and guarantees that the magnitude of the operational armature currents is smaller than the value of the critical current of the superconducting tape used for stator winding.

5 June 2013 - European Union Ambassador to Switzerland and the Principality of Liechtenstein R. Jones in the ATLAS cavern with ATLAS Collaboration Deputy Spokesperson T. Wengler, in the LHC tunnel at Point 1 with Technology Department Head F. Bordry and signing the guest book with Director-General R. Heuer. Head of the EU Projects Office S. Stavrev present.

CERN Multimedia

Jean-Claude Gadmer

2013-01-01

5 June 2013 - European Union Ambassador to Switzerland and the Principality of Liechtenstein R. Jones in the ATLAS cavern with ATLAS Collaboration Deputy Spokesperson T. Wengler, in the LHC tunnel at Point 1 with Technology Department Head F. Bordry and signing the guest book with Director-General R. Heuer. Head of the EU Projects Office S. Stavrev present.

1 November 2012 - Signature of the Co-operation Agreement between the Administrative Department of Science, Technology and Innovation (COLCIENCIAS) of Colombia and the European Organization for Nuclear Research (CERN) concerning Scientific and Technical Co-operation in High-Energy Physics and related technologies by CERN Director-General R. Heuer, witnessed by Ambassador of Colombia to Switzerland C. Turbay Quintero.

CERN Multimedia

Maximilien Brice

2012-01-01

1 November 2012 - Signature of the Co-operation Agreement between the Administrative Department of Science, Technology and Innovation (COLCIENCIAS) of Colombia and the European Organization for Nuclear Research (CERN) concerning Scientific and Technical Co-operation in High-Energy Physics and related technologies by CERN Director-General R. Heuer, witnessed by Ambassador of Colombia to Switzerland C. Turbay Quintero.

Dental Anomalies in Permanent Teeth after Trauma in Primary Dentition.

Science.gov (United States)

Bardellini, Elena; Amadori, Francesca; Pasini, Stefania; Majorana, Alessandra

This retrospective study aims to evaluate the prevalence of dental anomalies in permanent teeth as a result of a trauma concerning the predecessor primary teeth. A total of 241 records of children (118 males and 123 females, mean age 3.62 ± 1.40) affected by trauma on primary teeth were analyzed. All patients were recalled to evaluate the status of the permanent successor teeth by clinical and radiographic investigations. Out of 241 patients, 106 patients (for a total of 179 traumatized primary teeth) presented at the recall. Dental anomalies on successor permanent teeth were detected in 21 patients (19.8%), for a total of 26 teeth (14.5%) and 28 anomalies. Anomalies of the eruptive process were the most observed disturbances (60.7%), followed by enamel hypoplasia (25%) and white spots (14.3%). A higher percentage of anomalies on permanent teeth was observed when trauma occurred at an age less than 36 months (38.5% of cases). Intrusive and extrusive luxation were related with the most cases of clinical disturbances in the successor permanent teeth. The results of this study highlight the risk of dental anomalies after a trauma in primary dentition, especially in early-aged children and in case of intrusive luxation.

Microbial diversity in a permanently cold and alkaline environment in Greenland

DEFF Research Database (Denmark)

Glaring, Mikkel Andreas; Vester, Jan Kjølhede; Lylloff, Jeanette Eva

2015-01-01

The submarine ikaite columns located in the Ikka Fjord in Southern Greenland represent a unique, permanently cold (less than 6°C) and alkaline (above pH 10) environment and are home to a microbial community adapted to these extreme conditions. The bacterial and archaeal community inhabiting...... the ikaite columns and surrounding fjord was characterised by high-throughput pyrosequencing of 16S rRNA genes. Analysis of the ikaite community structure revealed the presence of a diverse bacterial community, both in the column interior and at the surface, and very few archaea. A clear difference...... in overall taxonomic composition was observed between column interior and surface. Whereas the surface, and in particular newly formed ikaite material, was primarily dominated by Cyanobacteria and phototrophic Proteobacteria, the column interior was dominated by Proteobacteria and putative anaerobic...

Study of peristomal skin disorders in patients with permanent stomas

DEFF Research Database (Denmark)

Herlufsen, P; Olsen, A G; Carlsen, B

2006-01-01

The aim of this article was to investigate the frequency, severity and diversity of peristomal skin disorders among individuals with a permanent stoma in a community population. All individuals with a permanent stoma (n=630) in a Danish community population were invited to participate in a cross-...

Permanent magnet with MgB{sub 2} bulk superconductor

Energy Technology Data Exchange (ETDEWEB)

Yamamoto, Akiyasu, E-mail: yamamoto@appchem.t.u-tokyo.ac.jp [The University of Tokyo, 7-3-1 Hongo, Bunkyo, Tokyo 113-8656 (Japan); JST-PRESTO, 4-1-8 Honcho, Kawaguchi, Saitama 332-0012 (Japan); Ishihara, Atsushi; Tomita, Masaru [Railway Technical Research Institute, 2-8-38 Hikari, Kokubunji, Tokyo 185-8540 (Japan); Kishio, Kohji [The University of Tokyo, 7-3-1 Hongo, Bunkyo, Tokyo 113-8656 (Japan)

2014-07-21

Superconductors with persistent zero-resistance currents serve as permanent magnets for high-field applications requiring a strong and stable magnetic field, such as magnetic resonance imaging. The recent global helium shortage has quickened research into high-temperature superconductors (HTSs)—materials that can be used without conventional liquid-helium cooling to 4.2 K. Herein, we demonstrate that 40-K-class metallic HTS magnesium diboride (MgB{sub 2}) makes an excellent permanent bulk magnet, maintaining 3 T at 20 K for 1 week with an extremely high stability (<0.1 ppm/h). The magnetic field trapped in this magnet is uniformly distributed, as for single-crystalline neodymium-iron-boron. Magnetic hysteresis loop of the MgB{sub 2} permanent bulk magnet was determined. Because MgB{sub 2} is a simple-binary-line compound that does not contain rare-earth metals, polycrystalline bulk material can be industrially fabricated at low cost and with high yield to serve as strong magnets that are compatible with conventional compact cryocoolers, making MgB{sub 2} bulks promising for the next generation of Tesla-class permanent-magnet applications.

Communication dated 6 March 2013 received from the Permanent Mission of the Islamic Republic of Iran to the Agency regarding the Report of the Director General on the Implementation of Safeguards in Iran

International Nuclear Information System (INIS)

2013-01-01

The Secretariat has received a communication dated 6 March 2013 from the Permanent Mission of the Islamic Republic of Iran to the Agency enclosing an explanatory note by the Permanent Mission dated 6 March 2013, on the report of the Director General on ''Implementation of the NPT Safeguards Agreement and relevant provisions of Security Council resolutions in the Islamic Republic of Iran'' contained in GOV/2013/6 (21 February 2013) and three letters from the Resident Representative of Iran addressed to the Director General. The communication and, as requested by the Permanent Mission, the explanatory note and the letters are circulated herewith for information.

19 October 2004 – CERN’s 50th Anniversary Celebration

CERN Multimedia

Patrice Loiez

2004-01-01

From left to right, front row : Italian Vice Minister for Research G. Possa, President of the Geneva State Council R. Cramer, President of the Swiss Confederation J. Deiss, HM King Juan Carlos I of Spain, CERN Director-General R. Aymar, President of the French Republic J. Chirac, Cczech Minister of Education, Youth and Sports P. Buzkovà, CERN Council President E. Iarocci, Geneva Cantonal Department Head M. Spoerri, Geneva Representative, Geneva State Councillor C. Lamprecht Second row : Director of the the Danish Research Agency J. M. Hansen, University of Amsterdan Dean Faculty of Science W. Hoogland, Greek Minister of Tourism D. Avramopoulos, Slovak Minister of Education M. Fronc, Finnish Minister of Trade and Industry M. Pekkarinen, British Minister for Science and Innovation Lord Sainsbury of Turville, Geneva State Chancellor R. Hensler Third row : European Commission Ambassador C. Trojan, Belgian Ambassador F. Roux, Swedish Secretary of State K. Eliasson, US Mission Representative L. Cassel, Japanese Fo...

Perspectives for high-performance permanent magnets: applications, coercivity, and new materials

Science.gov (United States)

Hirosawa, Satoshi; Nishino, Masamichi; Miyashita, Seiji

2017-03-01

High-performance permanent magnets are indispensable in the production of high-efficiency motors and generators and ultimately for sustaining the green earth. The central issue of modern permanent magnetism is to realize high coercivity near and above room temperature on marginally hard magnetic materials without relying upon the critical elements such as heavy rare earths by means of nanostructure engineering. Recent investigations based on advanced nanostructure analysis and large-scale first principles calculations have led to significant paradigm shifts in the understandings of coercivity mechanism in Nd-Fe-B permanent magnets, which includes the discovery of the ferromagnetism of the thin (2 nm) intergranular phase surrounding the Nd2Fe14B grains, the occurrence of negative (in-plane) magnetocrystalline anisotropy of Nd ions and some Fe atoms at the interface which degrades coercivity, and visualization of the stochastic behaviors of magnetization in the magnetization reversal process at high temperatures. A major change may occur also in the motor topologies, which is currently overwhelmed by the magnetic flux weakening interior permanent magnet motor type, to other types with variable flux permanent magnet type in some applications to open up a niche for new permanent magnet materials. Keynote talk at 8th International Workshop on Advanced Materials Science and Nanotechnology (IWAMSN2016), 8-12 November 2016, Ha Long City, Vietnam.

Analysis of a spherical permanent magnet actuator

International Nuclear Information System (INIS)

Wang, J.; Jewell, G.W.; Howe, D.

1997-01-01

This paper describes a new form of actuator with a spherical permanent magnet rotor and a simple winding arrangement, which is capable of a high specific torque by utilizing a rare-earth permanent magnet. The magnetic-field distribution is established using an analytical technique formulated in spherical coordinates, and the results are validated by finite element analysis. The analytical field solution allows the prediction of the actuator torque and back emf in closed forms. In turn, these facilitate the characterization of the actuator and provide a firm basis for design optimization, system dynamic modeling, and closed-loop control law development. copyright 1997 American Institute of Physics

Bacterial diversity in permanently cold and alkaline ikaite columns from Greenland.

Science.gov (United States)

Schmidt, Mariane; Priemé, Anders; Stougaard, Peter

2006-12-01

Bacterial diversity in alkaline (pH 10.4) and permanently cold (4 degrees C) ikaite tufa columns from the Ikka Fjord, SW Greenland, was investigated using growth characterization of cultured bacterial isolates with Terminal-restriction fragment length polymorphism (T-RFLP) and sequence analysis of bacterial 16S rRNA gene fragments. More than 200 bacterial isolates were characterized with respect to pH and temperature tolerance, and it was shown that the majority were cold-active alkaliphiles. T-RFLP analysis revealed distinct bacterial communities in different fractions of three ikaite columns, and, along with sequence analysis, it showed the presence of rich and diverse bacterial communities. Rarefaction analysis showed that the 109 sequenced clones in the 16S rRNA gene library represented between 25 and 65% of the predicted species richness in the three ikaite columns investigated. Phylogenetic analysis of the 16S rRNA gene sequences revealed many sequences with similarity to alkaliphilic or psychrophilic bacteria, and showed that 33% of the cloned sequences and 33% of the cultured bacteria showed less than 97% sequence identity to known sequences in databases, and may therefore represent yet unknown species.

Permanent magnet material and process for producing the same

International Nuclear Information System (INIS)

Yoneyama, T.; Hori, T.; Ohima, T.

1978-01-01

This invention relates to an improvement of a permanent magnet material consisting, apart from impurities, of intermetallic compounds of the general formula of R 2 Co 17 , wherein the R component is at least one rare earth metal excluding radioactive elements and the Co component is cobalt. A suitable process to produce the permanent magnet material according to the invention is described. (U.K.)

Budget allocation for permanent and contingent capacity under stochastic demand

NARCIS (Netherlands)

Dellaert, N.P.; Jeunet, J.; Mincsovics, G.Z.

2011-01-01

We develop a model of budget allocation for permanent and contingent workforce under stochastic demand. The level of permanent capacity is determined at the beginning of the horizon and is kept constant throughout, whereas the number of temporary workers to be hired must be decided in each period.

Method and apparatus for assembling a permanent magnet pole assembly

Science.gov (United States)

Carl, Jr., Ralph James; Bagepalli, Bharat Sampathkumaran [Niskayuna, NY; Jansen, Patrick Lee [Scotia, NY; Dawson, Richard Nils [Voorheesville, NY; Qu, Ronghai [Clifton Park, NY; Avanesov, Mikhail Avramovich [Moscow, RU

2009-08-11

A pole assembly for a rotor, the pole assembly includes a permanent magnet pole including at least one permanent magnet block, a plurality of laminations including a pole cap mechanically coupled to the pole, and a plurality of laminations including a base plate mechanically coupled to the pole.

Budget allocation for permanent and contingent capacity under stochastic demand

NARCIS (Netherlands)

Dellaert, N.P.; Jeunet, J.; Mincsovics, G.Z.

2009-01-01

We develop a model of budget allocation for permanent and contingent workforce under stochastic demand. The level of permanent capacity is determined at the beginning of the horizon and is kept constant throughout whereas the number of temporary workers to be hired must be decided in each period.

38 CFR 3.340 - Total and permanent total ratings and unemployability.

Science.gov (United States)

2010-07-01

... hand and one foot, or of the sight of both eyes, or becoming permanently helpless or bedridden... sense permanently helpless or bedridden, or when it is reasonably certain that a subsidence of the acute...

Magnetostatic interactions and forces between cylindrical permanent magnets

International Nuclear Information System (INIS)

Vokoun, David; Beleggia, Marco; Heller, Ludek; Sittner, Petr

2009-01-01

Permanent magnets of various shapes are often utilized in magnetic actuators, sensors or releasable magnetic fasteners. Knowledge of the magnetic force is required to control devices reliably. Here, we introduce an analytical expression for calculating the attraction force between two cylindrical permanent magnets on the assumption of uniform magnetization. Although the assumption is not fulfilled exactly in cylindrical magnets, we obtain a very good agreement between the calculated and measured forces between two identical cylindrical magnets and within an array of NdFeB cylindrical magnets.

High performance permanent magnet materials

International Nuclear Information System (INIS)

Sankar, S.G.; Herbst, J.F.; Koon, N.C.

1987-01-01

This book contains 25 selections. Some of the titles are: Initial magnetization behavior of rapidly quenched neodymium-iron-boron magnets; Optimization of liquid dynamic compaction for Fe-Nd-B magnet alloys; Misch-metal and/or aluminum substitutions in Nd-Fe-B permanent magnets; and NdFeB magnets with improved temperature characteristics

21 CFR 316.22 - Permanent-resident agent for foreign sponsor.

Science.gov (United States)

2010-04-01

... SERVICES (CONTINUED) DRUGS FOR HUMAN USE ORPHAN DRUGS Designation of an Orphan Drug § 316.22 Permanent-resident agent for foreign sponsor. Every foreign sponsor that seeks orphan-drug designation shall name a permanent resident of the United States as the sponsor's agent upon whom service of all processes, notices...

Cryogenic Permanent Magnet Undulators

International Nuclear Information System (INIS)

Chavanne, J.; Lebec, G.; Penel, C.; Revol, F.; Kitegi, C.

2010-01-01

For an in-vacuum undulator operated at small gaps the permanent magnet material needs to be highly resistant to possible electron beam exposure. At room temperature, one generally uses Sm 2 Co 17 or high coercivity NdFeB magnets at the expense of a limited field performance. In a cryogenic permanent magnet undulator (CPMU), at a temperature of around 150 K, any NdFeB grade reveals a coercivity large enough to be radiation resistant. In particular, very high remanence NdFeB material can be used to build undulators with enhanced field and X-ray brilliance at high photon energy provided that the pre-baking of the undulator above 100 deg. C can be eliminated. The ESRF has developed a full scale 2 m long CPMU with a period of 18 mm. This prototype has been in operation on the ID6 test beamline since January 2008. A significant effort was put into the characterization of NdFeB material at low temperature, the development of dedicated magnetic measurement systems and cooling methods. The measured heat budget with beam is found to be larger than expected without compromising the smooth operation of the device. Leading on from this first experience, new CPMUs are currently being considered for the upgrade of the ESRF.

Exterior rotor permanent magnet generator in variable speed applications

OpenAIRE

Sattar, Rauf

2016-01-01

This thesis explores approaches for converting rotational mechanical power from diesel engines into electrical power of fixed frequency and voltage. Advances in high energy permanent magnets and power electronics are enabling technologies that provide opportunities for electrical machines with increased efficiency and compact size for variable speed power generation. The overall objective was to design a permanent magnet machine with concentrated winding that could be used in variable spe...

Permanent bending and alignment of ZnO nanowires

Energy Technology Data Exchange (ETDEWEB)

Borschel, Christian; Spindler, Susann; Oertel, Michael; Ronning, Carsten [Institut fuer Festkoerperphysik, Friedrich-Schiller-Universitaet Jena, Max-Wien-Platz 1, 07743 Jena (Germany); Lerose, Damiana [MPI fuer Mikrostrukturphysik, Weinberg 2, 06120 Halle/Saale (Germany); Institut fuer Photonische Technologien, Albert-Einstein-Strasse 9, 07745 Jena (Germany); Bochmann, Arne [Institut fuer Photonische Technologien, Albert-Einstein-Strasse 9, 07745 Jena (Germany); Christiansen, Silke H. [Institut fuer Photonische Technologien, Albert-Einstein-Strasse 9, 07745 Jena (Germany); MPI fuer die Physik des Lichts, Guenther-Scharowsky-Str. 1, 91058 Erlangen (Germany); Nietzsche, Sandor [Zentrum fuer Elektronenmikroskopie, Friedrich-Schiller-Universitaet Jena, Ziegelmuehlenweg 1, 07743 Jena (Germany)

2011-07-01

Ion beams can be used to bend or re-align nanowires permanently, after they have been grown. We have irradiated ZnO nanowires with ions of different species and energy, achieving bending and alignment in various directions. We study the bending of single nanowires as well as the simultaneous alignment of large ensembles of ZnO nanowires in detail. Computer simulations show that the bending is initiated by ion beam induced damage. Dislocations are identified to relax stresses and make the bending and alignment permanent and resistant against annealing procedures.

Permanent draft genome of Rhodopirellula sallentina SM41.

Science.gov (United States)

Wegner, Carl-Eric; Richter, Michael; Richter-Heitmann, Tim; Klindworth, Anna; Frank, Carsten S; Glöckner, Frank Oliver; Harder, Jens

2014-02-01

The genome of Rhodopirellula sallentina SM41 was sequenced as a permanent draft to supplement the full genome sequence of the type strain Rhodopirellula baltica SH1(T). This isolate is part of a larger study to gain insights into the biogeography of Rhodopirellula species in European marine waters, as well as to amend the genus description of R. baltica. This genomics resource article is the third of a series of five publications reporting in total eight new permanent daft genomes of Rhodopirellula species. Copyright © 2013 Elsevier B.V. All rights reserved.

Design Considerations of Permanent Magnet Transverse Flux Machines

DEFF Research Database (Denmark)

Lu, Kaiyuan; Rasmussen, Peter Omand; Ritchie, Ewen

2011-01-01

electrical machines. This paper addresses two important design considerations for PMTFM—the influence of permanent magnet leakage flux, which plays an important role in the determination of machine output torque, and the leakage inductance. A new simple method to provide a quick estimation of the armature......Permanent magnet transverse flux machine (PMTFM) is well known for its high torque density and is interested in various direct-drive applications. Due to its complicated 3-D flux components, design and design optimization of a PMTFM is more difficult and time consuming than for radial flux...

Early working memory in children born with extremely low birth weight: assessed by object permanence.

Science.gov (United States)

Lowe, Jean; MacLean, Peggy C; Shaffer, Michele L; Watterberg, Kristi

2009-04-01

Object permanence is considered the earliest method for assessing working memory. Factors affecting object permanence performance in a sample of two hundred and thirty-three 18- to 22-month olds born with extremely low birth weight were examined. It was hypothesized that object permanence would be directly related to emotional and attention regulation, that children with lower birth weight and higher illness severity would have more difficulty on the object permanence task, and that no ethnic/racial differences would be found, as this is considered a culturally unbiased task. Attainment of object permanence had a significant positive association with emotional and attention regulation, even after controlling the medical severity and socioeconomic factors. More girls than boys passed the object permanence items. There was no ethnic/racial difference on object permanence. Our findings indicate that object permanence may be a culturally fair way of assessing development, and emotional and attention regulation are potential avenues of intervention for such skill.

Constant force linear permanent magnet actuators

NARCIS (Netherlands)

Paulides, J.J.H.; Encica, L.; Meessen, K.J.; Lomonova, E.A.

2009-01-01

In applications, such as vibration isolation, gravity compensation, pick-and-place machines, etc., there is a need for (long-stroke) passive constant force actuators combined with tubular permanent magnet actuators to minimize the power consumption, hence, passively counteract the gravitational

Development of heat pipe technology for permanent mold casting of magnesium alloys

International Nuclear Information System (INIS)

Elalem, K.; Mucciardi, F.; Gruzleski, J.E.; Carbonneau, Y.

2002-01-01

One of the key techniques for producing sound permanent mold castings is to use controlled mold cooling such as air cooling, water cooling and heat pipe cooling. Air-cooling has limited applications in permanent mold casting due to its low cooling capability and high cost. Water-cooling is widely used in permanent mold casting, but has some disadvantages such as safety issues and the facilities required. The early applications of heat pipes in permanent mold casting have shown tremendous results due to their high cooling rates, low cost and safety. In this work, a permanent mold for magnesium casting has been designed with the intention of producing shrinkage defects in the castings. Novel heat pipes that can generate high cooling rates have been constructed and used to direct the solidification in order to reduce the shrinkage. In this paper, the design of the mold and that of the heat pipes are presented. The results of some of the computer simulations that were conducted to determine casting conditions along with the potential of using heat pipes to direct the solidification are also presented. Moreover, a preliminary evaluation of the performance of heat pipes in the permanent mold casting of magnesium will also be discussed. (author)

Design improvement of permanent magnet flux switching motor with dual rotor structure

Science.gov (United States)

Soomro, H. A.; Sulaiman, E.; Kumar, R.; Rahim, N. S.

2017-08-01

This paper presents design enhancement to reduce permanent magnet (PM) volume for 7S-6P-7S dual rotor permanent magnet flux-switching machines (DRPMFSM) for electric vehicle application. In recent years, Permanent magnet flux switching (PMFS) motor and a new member of brushless permanent magnet machine are prominently used for the electric vehicle. Though, more volume of Rare-Earth Permanent Magnet (REPM) is used to increase the cost and weight of these motors. Thus, to overcome the issue, new configuration of 7S-6P- 7S dual rotor permanent magnet flux-switching machine (DRPMFSM) has been proposed and investigated in this paper. Initially proposed 7S-6P-7S DRPMFSM has been optimized using “deterministic optimization” to reduce the volume of PM and to attain optimum performances. In addition, the performances of initial and optimized DRPMFSM have been compared such that back-emf, cogging torque, average torque, torque and power vs speed performances, losses and efficiency have been analysed by 2D-finite element analysis (FEA) using the JMAG- Designer software ver. 14.1. Consequently, the final design 7S-6P-7S DRPMFSM has achieved the efficiency of 83.91% at reduced PM volume than initial design to confirm the better efficient motor for HEVs applications.

30 CFR 817.15 - Casing and sealing of underground openings: Permanent.

Science.gov (United States)

2010-07-01

... be designed to prevent access to the mine workings by people, livestock, fish and wildlife, machinery..., DEPARTMENT OF THE INTERIOR PERMANENT PROGRAM PERFORMANCE STANDARDS PERMANENT PROGRAM PERFORMANCE STANDARDS... shaft, drift, adit, tunnel, exploratory hole, entryway or other opening to the surface from underground...

Contributory Factors Related to Permanent Deformation of Hot Asphalt Mixtures

Directory of Open Access Journals (Sweden)

Alaa Husein Abd

2017-03-01

Full Text Available Permanent deformation (Rutting of asphalt pavements which appears in many roads in Iraq, have caused a major impact on pavement performance by reducing the useful service life of pavement and creating services hazards for highway users. The main objective of this research is investigating the effect of some contributory factors related to permanent deformation of asphalt concrete mixture. To meet the objectives of this research, available local materials are used including asphalt binder, aggregates, mineral filler and modified asphalt binder. The Superpave mix design system was adopted with varying volumetric compositions. The Superpave Gyratory Compactor was used to compact 24 asphalt concrete cylindrical specimens. To collect the required data and investigate the development of permanent deformation in asphalt concrete under repeated loadings, Wheel-Tracking apparatus has been used in a factorial testing program during which 44 slab samples; with dimensions of 400×300×50 mm; were tested to simulate . actual pavement. Based on wheel-tracking test results, it has been concluded that increasing the compaction temperature from 110 to 150ºC caused a decreasing in permanent deformation by 20.5 and 15.6 percent for coarse and fine gradation control asphalt mixtures respectively. While the permanent deformation decreased about 21.3 percent when the compaction temperature is increased from 110 to 150ºC for coarse gradation asphalt mixtures modified with styrene butadiene styrene SBS with 3 percent by asphalt binder weight.

Genetics Home Reference: permanent neonatal diabetes mellitus

Science.gov (United States)

... AL. Update on mutations in glucokinase (GCK), which cause maturity-onset diabetes of the young, permanent neonatal diabetes, and hyperinsulinemic hypoglycemia. Hum Mutat. 2009 Nov;30(11):1512-26. ...

Communication dated 2 March 2007 from the Permanent Mission of the Islamic Republic of Iran to the Agency concerning the nuclear activities of Iran

International Nuclear Information System (INIS)

2007-01-01

The Secretariat has received a Note Verbale dated 2 March 2007 from the Permanent Mission of the Islamic Republic of Iran (Iran), attaching a letter dated 19 February 2007 addressed to the Director General from the Resident Representative of Iran concerning the nuclear activities of Iran. The Note Verbale and, as requested therein, its attachment, are circulated herewith

Fixed-Time Stability Analysis of Permanent Magnet Synchronous Motors with Novel Adaptive Control

Directory of Open Access Journals (Sweden)

Maoxing Liu

2017-01-01

Full Text Available We firstly investigate the fixed-time stability analysis of uncertain permanent magnet synchronous motors with novel control. Compared with finite-time stability where the convergence rate relies on the initial permanent magnet synchronous motors state, the settling time of fixed-time stability can be adjusted to desired values regardless of initial conditions. Novel adaptive stability control strategy for the permanent magnet synchronous motors is proposed, with which we can stabilize permanent magnet synchronous motors within fixed time based on the Lyapunov stability theory. Finally, some simulation and comparison results are given to illustrate the validity of the theoretical results.

Permanent magnet quadrupoles for the CLIC Drive Beam decelerator

CERN Document Server

Shepherd, Ben; Collomb, Norbert

2012-01-01

STFC in collaboration with CERN has developed a new type of adjustable permanent magnet based quadrupole for the CLIC Drive Beam Decelerator. It uses vertical movement of the permanent magnets to achieve an integrated gradient range of 3.6-14.6T, which will allow it to be used for the first 60% of the decelerator line. Construction of a prototype of this magnet has begun; following this, it will be measured magnetically at CERN and Daresbury Laboratory.

Permanent Injury and the Disability-Mitigating Effects of Education

OpenAIRE

Bruce Cater; Sohee Kang; Byron Lew; Marco Pollanen

2013-01-01

Using data from Ontario, we study the extent to which education mitigates the realized work-disabling effects of permanent occupational injury. Focusing first on the rates of post-injury employment, our results suggest that education has a strong disability-mitigating effect in cases of knee and shoulder injuries, but a smaller effect where workers have experienced permanent back or wrist/finger injuries. A comparison of pre- and post-injury occupations then reveals that education mitigates d...

Three-dimensional analytical field calculation of pyramidal-frustum shaped permanent magnets

NARCIS (Netherlands)

Janssen, J.L.G.; Paulides, J.J.H.; Lomonova, E.

2009-01-01

This paper presents a novel method to obtain fully analytical expressions of the magnetic field created by a pyramidal-frustum shaped permanent magnet. Conventional analytical tools only provide expressions for cuboidal permanent magnets and this paper extends these tools to more complex shapes. A

Permanent-magnet-less machine having an enclosed air gap

Science.gov (United States)

Hsu, John S [Oak Ridge, TN

2012-02-07

A permanent magnet-less, brushless synchronous system includes a stator that generates a magnetic rotating field when sourced by an alternating current. An uncluttered rotor disposed within the magnetic rotating field is spaced apart from the stator to form an air gap relative to an axis of rotation. A stationary excitation core spaced apart from the uncluttered rotor by an axial air gap and a radial air gap substantially encloses the stationary excitation core. Some permanent magnet-less, brushless synchronous systems include stator core gaps to reduce axial flux flow. Some permanent magnet-less, brushless synchronous systems include an uncluttered rotor coupled to outer laminations. The quadrature-axis inductance may be increased in some synchronous systems. Some synchronous systems convert energy such as mechanical energy into electrical energy (e.g., a generator); other synchronous systems may convert any form of energy into mechanical energy (e.g., a motor).

Update on the Essure System for Permanent Birth Control.

Science.gov (United States)

Fantasia, Heidi Collins

In 2002, the U.S. Food and Drug Administration approved the Essure system for permanent birth control. Implantation with this device offers a minimally invasive option for permanent female contraception that is placed during a brief office visit. Unlike laparoscopic tubal sterilization, the Essure procedure requires no hospitalization or general anesthesia, resulting in minimal recovery time. After a decade of stability in the report of adverse effects, the U.S. Food and Drug Administration noted a sharp increase in patient-reported adverse events, including chronic pelvic pain, irregular bleeding, allergic reactions, and autoimmune-like reactions. In response to this increase in complaints, the U.S. Food and Drug Administration issued updated guidelines for patient education and counseling. This article discusses those updates, as well as implications for nurses who provide health care to women seeking permanent contraception. © 2017 AWHONN, the Association of Women’s Health, Obstetric and Neonatal Nurses.

Tests of planar permanent magnet multipole focusing elements

International Nuclear Information System (INIS)

Cobb, J.; Tatchyn, R.

1993-08-01

In recent work, planar configurations of permanent magnets were proposed as substitutes for conventional current-driven iron quadrupoles in applications limited by small aperture sizes and featuring small beam occupation diameters. Important examples include the configuring of focusing lattices in small-gap insertion devices, and the implementation of compact mini-beta sections on linear or circular machines. In subsequent analysis, this approach was extended to sextupoles and higher-order multipoles. In this paper we report on initial measurements conducted at the Stanford Linear Accelerator Center on recently fabricated planar permanent magnet quadrupoles and sextupoles configured out of SmCo and NdFe/B

[Early deciduous tooth loss--the mature or immature eruption of their permanent successors].

Science.gov (United States)

Czecholinski, J A; Kahl, B; Schwarze, C W

1994-04-01

On the basis of 147 panoramic radiographs of 49 patients, this study investigated the influence of the premature loss of deciduous teeth on the formation of their permanent successors at the time of their eruption. Furthermore the study investigated the eruptive movement of the successor teeth at the time of eruption. In addition to detecting the accelerated emergence of still immature successor premolars, the study also determined that the extraction ot the deciduous molars before the age of eight years delayed the eruption of the permanent successors given the absence of an infected deciduous tooth with abscess formation. In relation to the eruptive movement of the permanent molars due to the premature loss of the second deciduous molar, the study ascertained a mesial movement of the first permanent molars and an accelerated eruption of the second permanent molars.

The Permanent Magnet Operating Mechanism of Double Coil Parallel Driven at a High Speed

Directory of Open Access Journals (Sweden)

WEI Xau-Lao

2017-02-01

Full Text Available Abstract:Operating mechanism is the main part of breaker，and the quality of breaker will directly influence the safe operation of power system. Because of the continuous improvement requirements of switch，in order to mak this actuator faster and more powerful closing，this paper proposes a double coil parallel driven permanent magnet actuator at a high speed. This paper expounds the working principle of single and double coil parallel driven permanent magnet actuator. It uses Ansoft building model and contrasts test results. In prance we designed and produced the single and double coil parallel driven permanent magnet actuator for experimental study. The simulation and experiment results show that double coil parallel driven permanent magnet actuator，compared with single coil parallel driven permanent magnet actuator，has a better and faster action performance. Thus，the double coil parallel driven permanent magnet actuator achieves a kind of optimization.

17th and 18th March 2011 - Ukrainian Task Force led by Head, State Agency for Science, Innovation and Information Head V. Semynozhenko signing an agreement with CERN Director General R. Heuer witnessed by Ukrainian Ambassador to the Office of the United Nations M. Maimeskul.

CERN Document Server

Maximilien Brice

2011-01-01

CERN-HI-1103091 tirage 29: from left to right: ALICE Collaboration, Bogolyubov Institute for Theoretical Physics (ITP) National Academy of Sciences of Ukraine,G Zinovjev; First Deputy Head of the State Agency on Science, Innovation and Information of Ukraine B. Grinyov Deputy Minister, Cabinet of Ministers of Ukraine Y. Avksentiev Ambassador Maimeskul to the UN; Delegation Head V. Semynozhenko; CERN Director-General R. Heuer; Head of International Relations F. Pauss; Director for Research S. Bertolucci; Adviser for Ukraine T. Kurtyka; Adviser for Non-Member States J. Ellis; Deputy Legal Counsel M. Wilbers.

Aquatic insect assemblages of man-made permanent ponds, Buenos Aires city, Argentina.

Science.gov (United States)

Fontanarrosa, M S; Collantes, M B; Bachmann, A O

2013-02-01

Freshwater habitats are important elements within urban green space and they are endangered by various types of human activity. With the aim to increase the knowledge about species biodiversity in urban ecosystems, we characterised the assemblages of aquatic insects in four permanent man-made ponds in Buenos Aires city (Argentina) during a 1-year period. We recorded 32 species with Sigara spp. (Hemiptera) as the most abundant. The removal of aquatic vegetation from the studied ponds may have affected both the establishment and permanence of the insect community. Swimmers were the dominant group in the studied sites, followed by burrowers and sprawlers, and only a few strictly climbers were collected. Therefore, all sampled ponds were dominated by collectors (principally gatherers), secondarily by predators and only few shredders were detected, which was much affected by the removal of macrophytes. Non-parametric abundance indexes estimated a number of species very close to the observed number in each site. Conversely, the incidence indexes estimated more species because there were many more taxa present only in one sample than those represented by few individual in a sample. Our data provides some insights on the community of man-made ponds that can improve the management of these aquatic urban habitats. Considering that macrophytes affect animal assemblages due to their role as physical structures that increase the complexity or heterogeneity of habitats, they should not be removed by authorities in order to promote biodiversity.

Ammonia emissions from urea application to permanent pasture on a volcanic soil

Science.gov (United States)

Salazar, F.; Martínez-Lagos, J.; Alfaro, M.; Misselbrook, T.

2012-12-01

Agriculture is the largest source of ammonia (NH3) emission to the atmosphere, deriving mainly from livestock urine and manures, but fertilizer applications to pastures and crops also represent an important source. In Chile, where agriculture and cattle production are important activities (accounting for 4.5% of GDP along with the forestry sector), there are very few published data regarding NH3 emissions from pasture and crop fertilization. This study aimed to provide the first empirical field data for Chile on N losses due to NH3 volatilization following urea application to permanent pasture on a volcanic soil and to assess the influence of environmental conditions on emissions. Four field experiments were carried out on a volcanic acid soil using the micrometeorological integrated horizontal flux (IHF) mass balance method. Measurements were made in winter 2005 and 2007, and spring 2007 and 2008 following urea N fertilization to a permanent pasture at a rate equivalent to 100 kg N ha-1. Cumulative NH3 emissions over the measurement period were 1.4 and 7.7 kg N ha-1 for winter applications, and 12.2 and 26.7 kg N ha-1 for spring dressings. These N losses due to NH3 volatilization are within the range of emissions reported elsewhere. Consideration of urea application timing in Chile, with regards to weather and soil conditions, could have important consequences on minimising potential N losses via volatilization with associated financial benefits to farmers.

Design and Analysis of a Permanent Magnet Generator for Naval Applications

Science.gov (United States)

2005-06-01

Miller, Design of Brushless Permanent Magnet Motors , Magna Physics Publishing and Clarendon Press, 1994. [19] James L. Kirtley, "Course 6.685: Electric...Kirtley & Edward C. Lovelace, "Drag Loss in Retaining Rings of Permanent Magnet Motors ," SatCon Technology Corporation, March, 2003. [66] H. Polinder

Meanings attributed by nursing staff about permanent education in cardiovascular institution

Directory of Open Access Journals (Sweden)

Cintia Koerich

2016-02-01

Full Text Available Objective: to understand the meanings attributed by the nursing staff to permanent educational practices in a reference cardiovascular hospital. Methods: this is a qualitative study, which used the Grounded Theory in Data for collecting and analyzing data. The sample consisted of 22 nursing professionals. Results: the study presents two categories that highlight the need for further clarification of the nursing staff about the concept of permanent education in health, as well as reinforce the permanent education of nurses as a management practice which needs to be incorporated into other assignments in daily work. Conclusion: it is admitted the need to work the concepts of permanent education in health even in professional qualification, as well as place greater emphasis on managerial training of nurses, so they acquire the power to take their assignment as a nursing care manager and the nursing staff education contribute to the necessary changes in the health services.

Failure Diagnosis for Demagnetization in Interior Permanent Magnet Synchronous Motors

Directory of Open Access Journals (Sweden)

Takeo Ishikawa

2017-01-01

Full Text Available Since a high degree of reliability is necessary for permanent magnet synchronous motors, the detection of a precursor for the demagnetization of permanent magnets is very important. This paper investigates the diagnosis of very slight PM demagnetization. The permanent magnet volume is altered so as to mimic the effect of demagnetization. This paper investigates the influence of demagnetization by using several methods: the 3D finite element analysis (FEA of the motor, the measurement of high-frequency impedance, and the measurement and FEA of the stator voltage and current under vector control. We have obtained the following results. The back-EMF is proportional to permanent magnet volume, and there is no difference in the demagnetization in the radial direction and in the axial direction. Even harmonics and subharmonics of flux density at the teeth tip could be useful for diagnosis if a search coil is installed there. The relatively low frequency resistance at the d-axis position is useful for diagnosis. Under vector control, the stator voltage is useful except in an intermediate torque range, and the intermediate torque is expressed by a simple equation.

Design and analysis of tubular permanent magnet linear wave generator.

Science.gov (United States)

Si, Jikai; Feng, Haichao; Su, Peng; Zhang, Lufeng

2014-01-01

Due to the lack of mature design program for the tubular permanent magnet linear wave generator (TPMLWG) and poor sinusoidal characteristics of the air gap flux density for the traditional surface-mounted TPMLWG, a design method and a new secondary structure of TPMLWG are proposed. An equivalent mathematical model of TPMLWG is established to adopt the transformation relationship between the linear velocity of permanent magnet rotary generator and the operating speed of TPMLWG, to determine the structure parameters of the TPMLWG. The new secondary structure of the TPMLWG contains surface-mounted permanent magnets and the interior permanent magnets, which form a series-parallel hybrid magnetic circuit, and their reasonable structure parameters are designed to get the optimum pole-arc coefficient. The electromagnetic field and temperature field of TPMLWG are analyzed using finite element method. It can be included that the sinusoidal characteristics of air gap flux density of the new secondary structure TPMLWG are improved, the cogging force as well as mechanical vibration is reduced in the process of operation, and the stable temperature rise of generator meets the design requirements when adopting the new secondary structure of the TPMLWG.

Design and Analysis of Tubular Permanent Magnet Linear Wave Generator

Directory of Open Access Journals (Sweden)

Jikai Si

2014-01-01

Full Text Available Due to the lack of mature design program for the tubular permanent magnet linear wave generator (TPMLWG and poor sinusoidal characteristics of the air gap flux density for the traditional surface-mounted TPMLWG, a design method and a new secondary structure of TPMLWG are proposed. An equivalent mathematical model of TPMLWG is established to adopt the transformation relationship between the linear velocity of permanent magnet rotary generator and the operating speed of TPMLWG, to determine the structure parameters of the TPMLWG. The new secondary structure of the TPMLWG contains surface-mounted permanent magnets and the interior permanent magnets, which form a series-parallel hybrid magnetic circuit, and their reasonable structure parameters are designed to get the optimum pole-arc coefficient. The electromagnetic field and temperature field of TPMLWG are analyzed using finite element method. It can be included that the sinusoidal characteristics of air gap flux density of the new secondary structure TPMLWG are improved, the cogging force as well as mechanical vibration is reduced in the process of operation, and the stable temperature rise of generator meets the design requirements when adopting the new secondary structure of the TPMLWG.

Design and Analysis of Tubular Permanent Magnet Linear Wave Generator

Science.gov (United States)

Si, Jikai; Feng, Haichao; Su, Peng; Zhang, Lufeng

2014-01-01

Due to the lack of mature design program for the tubular permanent magnet linear wave generator (TPMLWG) and poor sinusoidal characteristics of the air gap flux density for the traditional surface-mounted TPMLWG, a design method and a new secondary structure of TPMLWG are proposed. An equivalent mathematical model of TPMLWG is established to adopt the transformation relationship between the linear velocity of permanent magnet rotary generator and the operating speed of TPMLWG, to determine the structure parameters of the TPMLWG. The new secondary structure of the TPMLWG contains surface-mounted permanent magnets and the interior permanent magnets, which form a series-parallel hybrid magnetic circuit, and their reasonable structure parameters are designed to get the optimum pole-arc coefficient. The electromagnetic field and temperature field of TPMLWG are analyzed using finite element method. It can be included that the sinusoidal characteristics of air gap flux density of the new secondary structure TPMLWG are improved, the cogging force as well as mechanical vibration is reduced in the process of operation, and the stable temperature rise of generator meets the design requirements when adopting the new secondary structure of the TPMLWG. PMID:25050388

Supragingival Microbial Profiles of Permanent and Deciduous Teeth in Children with Mixed Dentition.

Directory of Open Access Journals (Sweden)

Weihua Shi

Full Text Available The present study was designed to investigate the microbial profiles of teeth in different locations in mixed-dentition-stage children, and to compare the microbiomes of permanent and deciduous teeth in the same healthy oral cavity.Supragingival plaque samples of teeth in various locations-the first permanent molars, deciduous molars, deciduous canines and incisors and permanent incisors-were collected from 20 healthy mixed-dentition-stage children with 10-12 permanent teeth erupted. Plaque DNA was extracted, and the V3-V4 hypervariable region of the bacterial 16S rRNA gene was amplified and subjected to sequencing.On average, 18,051 high-quality sequences per sample were generated. Permanent tooth sites tended to host more diverse bacterial communities than those of deciduous tooth sites. A total of 12 phyla, 21 classes, 38 orders, 66 families, 74 genera were detected ultimately. Five predominant phyla (Proteobacteria, Firmicutes, Bacteroidetes, Fusobacteria and Actinobacteria were highly variable among sites. Of 26 genera with a mean relative abundance of >0.1%, 16 showed significant differences in relative abundance among the groups. More than 20% of the total operational taxonomical units were detected only in permanent or deciduous teeth. The variation in the microbial community composition was due mainly to permanent teeth being enriched in Actinomyces and deciduous teeth in Treponema. The core microbiome of supragingival plaque in mixed dentition comprised 19 genera with complex correlationships.Our results suggest differences in microbial diversity and composition between permanent and deciduous teeth sites in mixed dentition. Moreover, the core microbiome of these sites was determined. These findings enhance our understanding of the development of the native oral microbiota with age.

Temp-to-permanent employees: a longitudinal study of stress and selection success.

Science.gov (United States)

Bauer, T N; Truxillo, D M

2000-07-01

Temp-to-permanent employees are temporary workers who have the opportunity to become permanent employees after a specific amount of time (e.g., generally after a 3- to 12-month period of trial work). The authors predicted that temporary worker individual differences, self-monitoring, tolerance for ambiguity, and role adjustment are related to temporary worker physiological stress and to whether temporary employees are offered permanent employment. Longitudinal data collection (pre- and postentry) resulted in data from 136 temp-to-permanent employees. Tolerance for ambiguity and role adjustment were found to be related to temporary worker stress and selection success. Self-monitoring was related to selection success for workers in an extended probationary period. These results suggest the need for further exploration and application of models of stress in understanding factors related to temporary worker success.

Causes of permanent childhood hearing impairment

NARCIS (Netherlands)

Korver, Anna M. H.; Admiraal, Ronald J. C.; Kant, Sarina G.; Dekker, Friedo W.; Wever, Capi C.; Kunst, Henricus P. M.; Frijns, Johan H. M.; Oudesluys-Murphy, Anne Marie; Oudesluys-Murphy, A. M.; Korver, A. M. H.; Frijns, J. H. M.; Wever, C. C.; Konings, S.; Beers, W.; Dekker, F. W.; de Vries, J. J. C.; Vossen, A. C. T. M.; Kant, S. G.; van den Akker-van Marle, M. E.; Rieffe, C.; Ens-Dokkum, M. H.; van Straaten, H. L. M.; Uilenburg, N. N.; Elvers, B.; Loeber, G.; Meuwese-Jongejeugd, J.; Maré, M. J.; Van Zanten, G. A.; Goedegebure, A.; Coster, F.; Goverts, S. T.; Admiraal, R. J. C.; Cremers, C. W. R. J.; Kunst, H. P. M.; de Leeuw, M.; Dijkhuizen, J.; Scharloo, M.; Hoeben, D.; Rijpma, G.; Graef, W.; Linschoten, D.; Kuijper, J.; Hof, N. J.; Pans, D.; Jorritsma, F.; van Beurden, M.; ter Huurne, C. T.; Brienesse, P.; Koldewijn, G. J.; Letourneur, K. G.

2011-01-01

The causes of Permanent Childhood Hearing Impairment (PCHI) are often quoted as being hereditary in 50%, acquired in 25%, and unknown in 25% of cases. Interest in the causes of PCHI has grown recently due to increasing diagnostic possibilities. We investigated the evidence for the reported

Causes of permanent childhood hearing impairment

NARCIS (Netherlands)

Korver, A.M.; Admiraal, R.J.C.; Kant, S.G.; Dekker, F.W.; Wever, C.; Kunst, H.P.M.; Frijns, J.H.; Oudesluys-Murphy, A.M.

2011-01-01

INTRODUCTION: The causes of Permanent Childhood Hearing Impairment (PCHI) are often quoted as being hereditary in 50%, acquired in 25%, and unknown in 25% of cases. Interest in the causes of PCHI has grown recently due to increasing diagnostic possibilities. We investigated the evidence for the

Microbial diversity in a permanently cold and alkaline environment in Greenland.

Science.gov (United States)

Glaring, Mikkel A; Vester, Jan K; Lylloff, Jeanette E; Al-Soud, Waleed Abu; Sørensen, Søren J; Stougaard, Peter

2015-01-01

The submarine ikaite columns located in the Ikka Fjord in Southern Greenland represent a unique, permanently cold (less than 6°C) and alkaline (above pH 10) environment and are home to a microbial community adapted to these extreme conditions. The bacterial and archaeal community inhabiting the ikaite columns and surrounding fjord was characterised by high-throughput pyrosequencing of 16S rRNA genes. Analysis of the ikaite community structure revealed the presence of a diverse bacterial community, both in the column interior and at the surface, and very few archaea. A clear difference in overall taxonomic composition was observed between column interior and surface. Whereas the surface, and in particular newly formed ikaite material, was primarily dominated by Cyanobacteria and phototrophic Proteobacteria, the column interior was dominated by Proteobacteria and putative anaerobic representatives of the Firmicutes and Bacteroidetes. The results suggest a stratification of the ikaite columns similar to that of classical soda lakes, with a light-exposed surface inhabited by primary producers and an anoxic subsurface. This was further supported by identification of major taxonomic groups with close relatives in soda lake environments, including members of the genera Rhodobaca, Dethiobacter, Thioalkalivibrio and Tindallia, as well as very abundant groups related to uncharacterised environmental sequences originally isolated from Mono Lake in California.

Spreadsheet software to assess locomotor disability to quantify permanent physical impairment

Directory of Open Access Journals (Sweden)

Sunderraj Ellur

2012-01-01

Full Text Available Context: Assessment of physical disability is an important duty of a plastic surgeon especially for those of us who are in an institutional practice. Aim: The Gazette of India notification gives a guideline regarding the assessment of the disability. However, the calculations as per the guidelines are time consuming. In this article, a spreadsheet program which is based on the notification is presented. The aim of this article is to design a spreadsheet program which is simple, reproducible, user friendly, less time consuming and accurate. Materials and Methods: This spreadsheet program was designed using the Microsoft Excel. The spreadsheet program was designed on the basis of the guidelines in the Gazette of India Notification regarding the assessment of Locomotor Disability to Quantify Permanent Physical Impairment. Two representative examples are presented to help understand the application of this program. Results: Two spreadsheet programs, one for upper limb and another for the lower limb are presented. The representative examples show the accuracy of the program to match the results of the traditional method of calculation. Conclusion: A simple spreadsheet program can be designed to assess disability as per the Gazette of India Notification. This program is easy to use and is accurate.

Representativeness of the LifeLines Cohort Study.

Directory of Open Access Journals (Sweden)

Bart Klijs

Full Text Available LifeLines is a large prospective population-based three generation cohort study in the north of the Netherlands. Different recruitment strategies were adopted: recruitment of an index population via general practitioners, subsequent inclusion of their family members, and online self-registration. Our aim was to investigate the representativeness of the adult study population at baseline and to evaluate differences in the study population according to recruitment strategy.Demographic characteristics of the LifeLines study population, recruited between 2006-2013, were compared with the total adult population in the north of the Netherlands as registered in the Dutch population register. Socioeconomic characteristics, lifestyle, chronic diseases, and general health were further compared with participants of the Permanent Survey of Living Conditions within the region (2005-2011, N = 6,093. Differences according to recruitment strategy were assessed.Compared with the population of the north of the Netherlands, LifeLines participants were more often female, middle aged, married, living in a semi-urban place and Dutch native. Adjusted for differences in demographic composition, in LifeLines a smaller proportion had a low educational attainment (5% versus 14% or had ever smoked (54% versus 66%. Differences in the prevalence of various chronic diseases and low general health scores were mostly smaller than 3%. The age profiles of the three recruitment groups differed due to age related inclusion criteria of the recruitment groups. Other differences according to recruitment strategy were small.Our results suggest that, adjusted for differences in demographic composition, the LifeLines adult study population is broadly representative for the adult population of the north of the Netherlands. The recruitment strategy had a minor effect on the level of representativeness. These findings indicate that the risk of selection bias is low and that risk estimates

Permanent burying method for product

International Nuclear Information System (INIS)

Sakai, Goro; Sakata, Noboru; Hironaka, Yoshikazu; Shigematsu, Kazuo; Yurugi, Masahiro; Minami, Masayoshi; Yoshisaki, Masato.

1995-01-01

In a method of permanently burying an object by filling and solidifying a cement mortar in gaps between each of objects to be buried underground, cement mortar is filled into gaps, which comprises water at a unit amount determined as from 200 to 250kg/m 3 , a cement at low water/cement ratio (%) of from 70 to 400%, and contains fine powder having an average grain size of not greater than 100μm (not containing cement) of 50 to 800kg/m 3 , fine aggregates of 800 to 1200kg/m 3 , UERAN gum (a bio-gum powder produced by aerobic fermentation of alcaligenes-bacteria) of 20g/m 3 to 1.3kg/m 3 , a dispersing agent of 0 to 40kg/m 3 , a swelling agent of 0 to 40kg/m 3 . Then if the mortar blended with the UERAN gum is injected, any gaps can be filled tightly, no breeding is caused and since the amount of cement is small, it does not suffer from temperature cracking. Therefore, the state of filling is kept permanently, and environmental pollution caused by radioactive wastes can be prevented. (N.H.)

Robotized Surface Mounting of Permanent Magnets

Directory of Open Access Journals (Sweden)

Erik Hultman

2014-10-01

Full Text Available Using permanent magnets on a rotor can both simplify the design and increase the efficiency of electric machines compared to using electromagnets. A drawback, however, is the lack of existing automated assembly methods for large machines. This paper presents and motivates a method for robotized surface mounting of permanent magnets on electric machine rotors. The translator of the Uppsala University Wave Energy Converter generator is used as an example of a rotor. The robot cell layout, equipment design and assembly process are presented and validated through computer simulations and experiments with prototype equipment. A comparison with manual assembly indicates substantial cost savings and an improved work environment. By using the flexibility of industrial robots and a scalable equipment design, it is possible for this assembly method to be adjusted for other rotor geometries and sizes. Finally, there is a discussion on the work that remains to be done on improving and integrating the robot cell into a production line.

Frontal lobe activation during object permanence: data from near-infrared spectroscopy.

Science.gov (United States)

Baird, Abigail A; Kagan, Jerome; Gaudette, Thomas; Walz, Kathryn A; Hershlag, Natalie; Boas, David A

2002-08-01

The ability to create and hold a mental schema of an object is one of the milestones in cognitive development. Developmental scientists have named the behavioral manifestation of this competence object permanence. Convergent evidence indicates that frontal lobe maturation plays a critical role in the display of object permanence, but methodological and ethical constrains have made it difficult to collect neurophysiological evidence from awake, behaving infants. Near-infrared spectroscopy provides a noninvasive assessment of changes in oxy- and deoxyhemoglobin and total hemoglobin concentration within a prescribed region. The evidence described in this report reveals that the emergence of object permanence is related to an increase in hemoglobin concentration in frontal cortex.

Development of a hybrid bearing using permanent magnets and piezoelectric actuators

International Nuclear Information System (INIS)

Park, Jung-Ho; Ham, Young-Bog; Yun, So-Nam; Lee, Hu-Seung

2010-01-01

In this study, a hybrid magnetic bearing with permanent magnets and piezoelectric actuators is investigated. First, in this study, a novel concept in which piezoelectric actuators are used to compensate for low stiffness and damping resulting from the unstable characteristics of a passive magnetic bearing using only permanent magnets is proposed. Secondly, the permanent magnets are optimally arranged through an electromagnetic field analysis. Then, the driving amplifier unit and a prototype radial bearing using the proposed concept are fabricated. Finally, basic characteristics, such as the results of an impact test and a rotational runout test with constant speed are investigated and discussed, and experiments using PID control method are conducted.

30 CFR 816.15 - Casing and sealing of drilled holes: Permanent.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Casing and sealing of drilled holes: Permanent...-SURFACE MINING ACTIVITIES § 816.15 Casing and sealing of drilled holes: Permanent. When no longer needed... exploration hole, other drilled hole or borehole, well, and other exposed underground opening shall be capped...

Variable-field permanent-magnet quadrupole for the SSC

International Nuclear Information System (INIS)

Barlow, D.B.; Kraus, R.H. Jr.; Martinez, R.P.; Meyer, R.E.

1994-01-01

A set of compact variable-field permanent-magnet quadrupoles have been designed, fabricated, and tested for use in the SSC linac matching section. The quadrupoles have 24 mm-diameter apertures and 40 mm-long poles. The hybrid (permanent-magnet and iron) design, uses a fixed core of magnet material (NdFeB) and iron (C-1006) surrounded by a rotating ring of the same magnet material and iron. The quadrupole gradient-length product can be smoothly varied from a minimum of 0.7 T up to a maximum of 4.3 T by a 90 degree rotation of the outer ring of iron and magnet material

Controlling chaos in the permanent magnet synchronous motor

International Nuclear Information System (INIS)

Zribi, Mohamed; Oteafy, Ahmed; Smaoui, Nejib

2009-01-01

The Permanent Magnet Synchronous Motor (PMSM) is known to exhibit chaotic behavior under certain conditions. This paper proposes to use an instantaneous Lyapunov exponent control algorithm to control the PMSM. One of the objectives of the control approach is to bring order to the PMSM and to drive it to any user-defined desired state. Simulation results under different operating conditions indicate that the proposed control scheme works well. Moreover, the proposed Lyapunov exponent control scheme is able to induce chaos on the permanent magnet synchronous motor. Simulation results show the effectiveness of the proposed control scheme in chaotifing the response of the motor.

Variable-field permanent magnet quadrupole for the SSC

International Nuclear Information System (INIS)

Barlow, D.B.; Kraus, R.H. Jr.; Martinez, R.P.; Meyer, R.E.

1993-01-01

A set of compact variable-field permanent-magnet quadrupoles have been designed, fabricated, and tested for use In the SSC linac matching section. The quadrupoles have 24 mm-diameter apertures and 40 mm-long poles. The hybrid (permanent-magnet and iron) design, uses a fixed core of magnet material (NdFeB) and iron (C-1006) surrounded by a rotating ring of the same magnet material and iron. The quadrupole gradient-length product can be smoothly varied from a minimum of 0.7 T up to a maximum, of 4.3 T by a 90 degrees rotation of the outer ring of iron and magnet material

Sexism and Permanent Exclusion from School

Science.gov (United States)

Carlile, Anna

2009-01-01

Focussing on narratives collected during a two year participant observation research project in the children's services department of an urban local authority, this article addresses the intersection between incidents of permanent exclusion from school and assumptions made on the basis of a young person's gender. The article considers gendered…

Roles of coercivity and remanent flux density of permanent magnet in interior permanent magnet synchronous motor (IPMSM) performance for electric vehicle applications

Science.gov (United States)

Won, Hoyun; Hong, Yang-Ki; Lee, Woncheol; Choi, Minyeong

2018-05-01

We used four rotor topologies of an interior permanent magnet synchronous motor (IPMSM) to investigate the effects of remanent flux density (Br) and coercivity (Hc) of permanent magnet on motor performance. Commercial strontium hexaferrite (SrFe12O19: energy product, (BH)max, of 4.62 MGOe) and Nd-Fe-B ((BH)max of 38.2 MGOe) magnets were used for the rotor designs. The same machine specifications and magnet volume keep constant, while the Hc and Br vary to calculate torque and energy efficiency with the finite-element analysis. A combination of high Hc and low Br more effectively increased maximum torque of IPMSM when the hexaferrite magnet was used. For Nd-Fe-B magnet, the same combination did not affect maximum torque, but increased energy efficiency at high speed. Therefore, the Hc value of a permanent magnet is more effective than the Br in producing high maximum torque for SrM-magnet based IPMSM and high energy efficiency at high speed for Nd-Fe-B magnet based IPMSM.

Comparison of outcomes of permanently closed and periodically harvested coral reef reserves.

Science.gov (United States)

Bartlett, C Y; Manua, C; Cinner, J; Sutton, S; Jimmy, R; South, R; Nilsson, J; Raina, J

2009-12-01

In many areas of the developing world, the establishment of permanent marine reserves is inhibited by cultural norms or socioeconomic pressures. Community conserved areas that are periodically harvested are increasingly being implemented as fisheries management tools, but few researchers have empirically compared them with permanently closed reserves. We used a hierarchical control-impact experimental design to compare the abundance and biomass of reef fishes, invertebrates, and substrate composition in periodically harvested and permanent reserves and in openly fished (control sites) of the South Pacific island country of Vanuatu. Fished species had significantly higher biomass in periodically harvested reserves than in adjacent openly fished areas. We did not detect differences in substratum composition between permanent reserves and openly fished areas or between permanent reserves and periodically harvested reserves. Giant clams (tridacnids) and top shells (Trochus niloticus) were vulnerable to periodic harvest, and we suggest that for adequate management of these species, periodically harvested community conservation areas be used in conjunction with other management strategies. Periodic harvest within reserves is an example of adaptive and flexible management that may meet conservation goals and that is suited to the social, economic, and cultural contexts of many coastal communities in the developing world.

Unusual bilaterally fused teeth in permanent dentition of a 9 -year ...

African Journals Online (AJOL)

The presence of bilateral fusion of teeth in permanent dentition is an unusual and rare condition. It is a developmental anomaly characterized by the union of two separate tooth germs during formation. The case of a 9 year old boy with fusion of permanent maxillary central incisors with associated bilateral disto-palatal ...

30 CFR 250.1711 - When will MMS order me to permanently plug a well?

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 2 2010-07-01 2010-07-01 false When will MMS order me to permanently plug a well? 250.1711 Section 250.1711 Mineral Resources MINERALS MANAGEMENT SERVICE, DEPARTMENT OF THE... Activities Permanently Plugging Wells § 250.1711 When will MMS order me to permanently plug a well? MMS will...

Calculation and Analysis of Permanent Magnet Eddy Current Loss Fault with Magnet Segmentation

Directory of Open Access Journals (Sweden)

Bing Li

2016-01-01

Full Text Available This paper investigates the problem of calculating and analyzing the effect of the permanent magnet eddy current loss fault due to magnet segmentation. Taking an interior permanent magnet synchronous motor with inverter supplied as an example, the rated power of motor was 2.2 kW. Three-dimensional finite-element model was firstly established based on finite-element software. Then, the model mesh and boundary conditions were handled specially; permanent magnet eddy current loss fault was calculated and analyzed theoretically with magnet segmentation from space harmonic and time harmonic, respectively. Finally, calculation results were compared and explained. A useful conclusion for permanent magnet synchronous motor design has been obtained.

Application of permanent magnet BaFe12O19 and NdFeB on small scale low speed permanent magnet generator

International Nuclear Information System (INIS)

Pudji Irasari; Novrita Idayanti

2009-01-01

Designing and manufacturing of low speed permanent magnet generator (PMG) for small scale electric power plant have been conducted. In this paper, the characteristics of generator using permanent magnet of barium ferrite (BaFe 12 O 19 ) and neodymium iron boron (NdFeB) were compared. Surface mounted type is selected as the rotor structure as all flux faces to stator winding and take a role in energy conversion. The experiment result demonstrates that at nominal speed, generator with BaFe 12 O 19 magnet can only generate power of 8.87 W while generator with NdFeB magnet can generate power of 1,988.93 W. (author)

Permanent magnet-based MRI

Science.gov (United States)

Cole, David Mitchell

1997-10-01

The principal goal of this project is to design and build a low-cost, imaging quality permanent magnet, together with the requisite shim, gradient, and radiofrequency coils, and to integrate the magnet with an existing imaging station. There are commercial products presently available that are very similar to this imager, but information about these products is proprietary. We present here all of the details concerning the design and the manufacturing process for constructing the permanent magnet, and include suggestions for improvement. Specifically, the prototype has a mass of about 150 kilograms and is therefore portable. It's C-type geometry allows maximum access to the imaging region, which is an oblate sphere about 0.5 inches in diameter centered in a 4.7 inch air gap between two seven-inch diameter polefaces. It is hoped that this imaging magnet will serve as the prototype for a series of larger versions that will be clinically useful and affordable to physicians in developing nations. To this end, scientists in the United States and Mexico have begun to collaborate with the intention to create an MRI institute in Mexico that will train new students in this discipline, and fabricate improved imagers. The prototype resulting from this work will seed the creation of this institute, and is intended to entice students into the study of MRI by enabling hands-on interaction with an otherwise prohibitively expensive instrument.

Multiple Unerupted Permanent Teeth Associated with Noonan ...

African Journals Online (AJOL)

[2] Oral findings in patients with NS include a high arched palate ... the atypical dental anomalies such as multiple unerupted permanent ... clinical features in a child with NS. .... Disabilities, Centers for Disease Control and Prevention (CDC).

Using axial magnetized permanent rings to build axial gradient magnetic field

International Nuclear Information System (INIS)

Peng Quanling

2003-01-01

Axial field produced by an axially magnetized permanent ring was studied. For two permanent magnet rings, if they are magnetized in the same direction, a nearly uniform axial field can be produced; if they are magnetized in opposite direction, an axial gradient field can be produced in the region between the two permanent rings, with the field strength changing from -B 0 to B 0 . A high gradient axial magnetic field has been built by using two axially magnetized permanent rings, the measured field results agree with the PANDIRA calculation very well. It is desirable that the field gradient can be varied to match various requirements. A method to produce the variable gradient field is presented. Axial gradient field can also be used as a beam focusing facility for linear accelerator if axial periodic field can be produced. Its magnetic field is similar to that of a solenoid, in which, large stray field will leak to the outside environment. A method for shielding the outside stray field is discussed

Investigation Procedure of Magnetic Performances of NdFeB Permanent Magnets

DEFF Research Database (Denmark)

Calin, Marius-Daniel; Helerea, Elena; Ritchie, Ewen

2011-01-01

The permanent magnet applications based on carbon steel magnets, hard ferrites and AlNiCo magnets classes are renewed with new classes of advanced magnetic materials based on rare earth elements, the Sm-Co and NdFeB types. Performance increase of the hard magnetic materials and their use in speci......The permanent magnet applications based on carbon steel magnets, hard ferrites and AlNiCo magnets classes are renewed with new classes of advanced magnetic materials based on rare earth elements, the Sm-Co and NdFeB types. Performance increase of the hard magnetic materials and their use...... in specific applications impose also great advances in the field of magnetic measurement. New researches need to be validated in order to investigate the NdFeB permanent magnets performances, including their stability under different thermal operational regimes. In this paper a specific investigation...... procedure of magnetic performances of NdFeB permanent magnets in correlation with the range of operating temperature is proposed based on modern hysteresisgraph method and impulse magnetization technique....

Development of Disk Rover, wall-climbing robot using permanent magnet disk

International Nuclear Information System (INIS)

Hirose, Shigeo; Tsutsumitake; Hiroshi; Toyama, Ryousei; Kobayashi, Kengo.

1992-01-01

A new type of wall climbing robot, named Disk Rover, using permanent magnet disks are developed. The newly introduced permanent magnet disk is to rotate the magnet disk on the surface of wall with partly contacted posture. It allows to produce high magnetic attraction force compared with conventional permanent wheel which utilizes only a small portion of the magnet installed around the wheel. The optimum design of the magnetic wheel is done by using finit element method and it is shown that the magnetic attraction force vs. weight ratio can be designed about three times higher than conventional type magnet wheel. The developed Disk Rover is 25 kg in weight including controller and battery, about 685 mm in diameter, 239 mm in height and has a pair of permanent magnet disks. It is demonstrated by the experiments that the Disk Rover can move around on the surface of the wall quite smoothly by radio control and has payload of about its own weight. Several considerations are also done in order to surmount bead weld. (author)

Investigation of Anisotropic Bonded Magnets in Permanent Magnet Machine Applications

Science.gov (United States)

Khazdozian, H. A.; McCall, S. K.; Kramer, M. J.; Paranthaman, M. P.; Nlebedim, I. C.

Rare earth elements (REE) provide the high energy product necessary for permanent magnets, such as sintered Nd2Fe14B, in many applications like wind energy generators. However, REEs are considered critical materials due to risk in their supply. To reduce the use of critical materials in permanent magnet machines, the performance of anisotropic bonded NdFeB magnets, aligned under varying magnetic field strength, was simulated using 3D finite element analysis in a 3MW direct-drive permanent magnet generator (DDPMG), with sintered N42 magnets used as a baseline for comparison. For direct substitution of the anisotropic bonded magnets, approximately 85% of the efficiency of the baseline model was achieved, irrespective of the alignment field. The torque and power generation of the DDPMG was not found to vary significantly with increase in the alignment field. Finally, design changes were studied to allow for the achievement of rated torque and power with the use of anisotropic bonded magnets, demonstrating the potential for reduction of critical materials in permanent magnets for renewable energy applications. This work was supported by the Critical Materials Institute, an Energy Innovation Hub funded by the U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Advanced Manufacturing Office.

Impacts of changing hydrology on permanent gully growth: experimental results

Science.gov (United States)

Day, Stephanie S.; Gran, Karen B.; Paola, Chris

2018-06-01

Permanent gullies grow through head cut propagation in response to overland flow coupled with incision and widening in the channel bottom leading to hillslope failures. Altered hydrology can impact the rate at which permanent gullies grow by changing head cut propagation, channel incision, and channel widening rates. Using a set of small physical experiments, we tested how changing overland flow rates and flow volumes alter the total volume of erosion and resulting gully morphology. Permanent gullies were modeled as both detachment-limited and transport-limited systems, using two different substrates with varying cohesion. In both cases, the erosion rate varied linearly with water discharge, such that the volume of sediment eroded was a function not of flow rate, but of total water volume. This implies that efforts to reduce peak flow rates alone without addressing flow volumes entering gully systems may not reduce erosion. The documented response in these experiments is not typical when compared to larger preexisting channels where higher flow rates result in greater erosion through nonlinear relationships between water discharge and sediment discharge. Permanent gullies do not respond like preexisting channels because channel slope remains a free parameter and can adjust relatively quickly in response to changing flows.

Evaluation of the expert patient program in a Chinese population with permanent colostomy.

Science.gov (United States)

Cheng, Fang; Xu, Qin; Dai, Xiao-dong; Yang, Lin-li

2012-01-01

A colostomy can negatively impact patients' quality of life. Recent research findings suggest that self-efficacy and psychosocial adjustment are positively associated with quality of life, but there are few research reports about the self-efficacy and psychosocial adjustment of patients with a permanent colostomy. The objective of the study was to evaluate the effect of a 3-week Expert Patient Program (EPP) on colostomy knowledge, stoma care self-efficacy, self-management, and psychosocial adjustment in Chinese patients who had a permanent colostomy. Eleven patients with permanent colostomy volunteered to be trained to be expert patients. Eighty-one patients with permanent colostomy were recruited and participated in the 3-week EPP courses. Questionnaires with items about knowledge on colostomy, stoma care self efficacy, self-management, and psychosocial adjustment were administered before and at 4 weeks following the EPP courses. Each EPP participant also completed a verbal interview at the end of the program. The EPP participants demonstrated statistically significant improvement (P colostomy (mean [SD]: 51.89 [11.45] vs 89.22 [19.90], 71.56 [5.93] vs 85.61 [14.32], 125.44 [19.27] vs 140.78 [15.34], 47.59 [9.64] vs 53.37 [10.68], respectively). Most participants gave positive ratings to the EPP. This study showed that the EPP was applied effectively in patients with permanent colostomy. This study highlights the importance of psychosocial support for patients with permanent colostomy. It offers a model of self-help practice in colostomy patients, supported by community that can benefit more patients with permanent colostomy.

Self-suspended permanent magnetic FePt ferrofluids

KAUST Repository

Dallas, Panagiotis; Kelarakis, Antonios; Sahore, Ritu; DiSalvo, Francis J.; Livi, Sebastien; Giannelis, Emmanuel P.

2013-01-01

on the surface of L10 FePt nanoparticles. In contrast, all types of ferrofluids previously reported employ either volatile solvents as the suspending media or superparamagnetic iron oxide nanoparticles (that lacks permanent magnetization) as the inorganic

Object permanence in the food-storing coal tit (Periparus ater) and the non-storing great tit (Parus major): Is the mental representation required?

Science.gov (United States)

Marhounová, Lucie; Frynta, Daniel; Fuchs, Roman; Landová, Eva

2017-05-01

Object permanence is a cognitive ability that enables animals to mentally represent the continuous existence of temporarily hidden objects. Generally, it develops gradually through six qualitative stages, the evolution of which may be connected with some specific ecological and behavioral factors. In birds, the advanced object permanence skills were reported in several storing species of the Corvidae family. In order to test the association between food-storing and achieved performance within the stages, we compared food-storing coal tits (Periparus ater) and nonstoring great tits (Parus major) using an adapted version of Uzgiris & Hunt's Scale 1 tasks. The coal tits significantly outperformed the great tits in searching for completely hidden objects. Most of the great tits could not solve the task when the object disappeared completely. However, the upper limit for both species is likely to be Stage 4. The coal tits could solve problems with simply hidden objects, but they used alternative strategies rather than mental representation when searching for completely hidden objects, especially if choosing between two locations. Our results also suggest that neophobia did not affect the overall performance in the object permanence tasks. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

Dynamic Analysis of Permanent Magnet Synchronous Generator with Power Electronics

Directory of Open Access Journals (Sweden)

OZCIRA, S.

2010-05-01

Full Text Available Permanent magnet DC motor-generators (PMDC, PMSG have been widely used in industrial and energy sectors recently. Power control of these systems can be achieved by controlling the output voltage. In this study, PMDC-PMSG systems are mathematically modeled and simulated in MATLAB and Simulink software. Then the results are discussed. A low power permanent magnet synchronous generator is driven by a permanent magnet DC motor and the output voltage is controlled by a frequency cycle-converter. The output of a half-wave uncontrolled rectifier is applied to an SPWM inverter and the power is supplied to a 300V, 50Hz load. The load which is connected to an LC filter is modeled by state-space equations. LC filter is utilized in order to suppress the voltage oscillations at the inverter output.

Mesiodistal Crown Dimensions of Permanent Teeth in Bangladeshi Population

Directory of Open Access Journals (Sweden)

Saeed Hossain Khan

2011-09-01

Full Text Available Background: Variation in tooth size is influenced by genetic and environmental factors. Several studies have reported tooth size variation between and within different racial groups. In order to improve the quality of dental care available, there is a great need for data on the mesiodistal crown dimensions of the individual teeth of Bangladeshi population. Objectives: To find nominative data on the mesiodistal crown dimensions of permanent teeth in Bangladeshi population and to compare the findings with those reported in other populations. Methods: This observational study was done from January, 2008 to June, 2010 in the Department of Orthodontics, Faculty of Dentistry, Bangabandhu Sheikh Mujib Medical University. A total of 244 Bangladeshi subjects (77 males and 167 females, aged 7 – 36 years (mean 18.3 years with no age limit who attended at the above mentioned place for treatment were included in the study. Main outcome measure was mesiodistal crown dimension of each tooth class of permanent dentition. Mesiodistal crown dimensions were measured from dental casts of the permanent teeth. Results: Males had significantly larger teeth than females for maxillary central incisors (p < 0.05 and for the mandibular second premolars (p < 0.001. In both sexes, the maxillary lateral incisors showed the greatest variability [coefficient of variation (CV 10.7%] and the maxillary canines the least (CV 6.9% in mesiodistal crown dimension. Mandibular canines displayed greater sexual dimorphism in mesiodistal crown size than in any other tooth classes. Comparisons of the mesiodistal crown dimensions between population groups showed that Bangladeshis have tooth sizes close to those of North Indians, Icelanders and Jordanians but larger than those of North American Whites. Conclusions: From this study, a standard for the mesiodistal crown dimensions of permanent dentition of Bangladeshi males and females are obtained. Key Words: Crown dimension; Mesio

Design considerations for permanent magnet direct drive generators for wind energy applications

NARCIS (Netherlands)

Jassal, A.K.; Polinder, H.; Damen, M.E.C.; Versteegh, K.

2012-01-01

Permanent Magnet Direct Drive (PMDD) generators offer very high force density, high efficiency and low number of components. Due to these advantages, PMDD generators are getting popular in the wind energy industry especially for offshore application. Presence of permanent magnets gives magnetic

A Route to Permanent Valley Polarization in Monolayer MoS2

KAUST Repository

Singh, Nirpendra

2016-10-24

Realization of permanent valley polarization in Cr-doped monolayer MoS2 is found to be unfeasible because of extended moment formation. Introduction of an additional hole is suggested as a viable solution. V-doped monolayer MoS2 is demonstrated to sustain permanent valley polarization and therefore can serve as a prototype material for valleytronics.

Advanced optimization of permanent magnet wigglers using a genetic algorithm

Energy Technology Data Exchange (ETDEWEB)

Hajima, Ryoichi [Univ. of Tokyo (Japan)

1995-12-31

In permanent magnet wigglers, magnetic imperfection of each magnet piece causes field error. This field error can be reduced or compensated by sorting magnet pieces in proper order. We showed a genetic algorithm has good property for this sorting scheme. In this paper, this optimization scheme is applied to the case of permanent magnets which have errors in the direction of field. The result shows the genetic algorithm is superior to other algorithms.

Advanced optimization of permanent magnet wigglers using a genetic algorithm

International Nuclear Information System (INIS)

Hajima, Ryoichi

1995-01-01

In permanent magnet wigglers, magnetic imperfection of each magnet piece causes field error. This field error can be reduced or compensated by sorting magnet pieces in proper order. We showed a genetic algorithm has good property for this sorting scheme. In this paper, this optimization scheme is applied to the case of permanent magnets which have errors in the direction of field. The result shows the genetic algorithm is superior to other algorithms

Summary on Sensorless permanent magnet Brushless DC Motor Control Strategies

Directory of Open Access Journals (Sweden)

Li Hai Xia

2016-01-01

Full Text Available This paper aims at discussing the development process and application of permanent magnet brushless DC motor. By referring to the related literatures, this thesis gives an overview of several common non-position sensor detection technologies, analyzing their strengths and weaknesses as well as a number of new and improved methods in practical applications. Besides, The application situation of the electric door with sensorless permanent magnet brushless DC motor was illustrated.

Early Working Memory in Children Born With Extremely Low Birth Weight: Assessed by Object Permanence

OpenAIRE

Lowe, Jean; MacLean, Peggy C.; Shaffer, Michele L.; Watterberg, Kristi

2009-01-01

Object permanence is considered the earliest method for assessing working memory. Factors affecting object permanence performance in a sample of two hundred and thirty-three 18- to 22-month olds born with extremely low birth weight were examined. It was hypothesized that object permanence would be directly related to emotional and attention regulation, that children with lower birth weight and higher illness severity would have more difficulty on the object permanence task, and that no ethnic...

Research on Strategies and Methods Suppressing Permanent Magnet Demagnetization in Permanent Magnet Synchronous Motors Based on a Multi-Physical Field and Rotor Multi-Topology Structure

Directory of Open Access Journals (Sweden)

Lin Li

2017-12-01

Full Text Available In this paper, a permanent magnet synchronous motor (PMSM with sleeves on the rotor outer surface is investigated. The purpose of sleeves is to fix the permanent magnets and protect them from being destroyed by the large centrifugal force. However, the sleeve material characteristics have a great influence on the PMSM, and therewith, most of the rotor eddy-current losses are generated in the rotor sleeve, which could increase the device temperature and even cause thermal demagnetization of the magnets. Thus, a sleeve scheme design with low eddy-current losses is necessary, and a method suppressing the local temperature peak of permanent magnets is presented. The 3-D electromagnetic finite element model of a 12.5 kW, 2000 r/min PMSM with a segmented sleeve is established, and the electromagnetic field is calculated by using the finite element method. The results show the effectiveness of the presented method in reducing the eddy current losses in the rotor. Using the thermal method, it can be found that the maximum temperature position and zone of permanent magnet will change. Thus, some strategies are comparatively analyzed in order to obtain the change rule of the position and zone. The obtained conclusions may provide a useful reference for the design and research of PMSMs.

Autistic children and the object permanence task.

Science.gov (United States)

Adrien, J L; Tanguay, P; Barthélémy, C; Martineaú, J; Perrot, A; Hameury, L; Sauvage, D

1993-01-01

Many mentally retarded autistic children can understand the concept of object permanence, but, in comparison to developmental-age matched normal children, the behavioral strategies they employ in carrying out the Casati-Lezine Object Permanence Test are deficient and lead to failure. These deficiencies appear unrelated to interference of stereotypic or other bizarre behavior in task performance. Similar problem-solving deficiencies can be found in mentally retarded children who are not autistic, suggesting that the deficiencies themselves are less related to the social-communication deficits of autistic children, but more to the general problem-solving difficulties found in children with a lower developmental quotient. Nevertheless, the qualitative analysis of results shows a tendency in autistic children, despite their better developmental level, to use less coordinated and regular sequences to solve the task than normal or mentally retarded children.

Sensorless Control of Permanent Magnet Synchronous Machines

DEFF Research Database (Denmark)

Matzen, Torben N.

Permanent magnet machines, with either surface mounted or embedded magnets on the rotor, are becoming more common due to the key advantages of higher energy conversion efficiency and higher torque density compared to the classical induction machine. Besides energy efficiency the permanent magnet...... the synchronous machine requires knowledge of the rotor shaft position due to the synchronous and undamped nature of the machine. The rotor position may be measured using a mechanical sensor, but the sensor reduces reliability and adds cost to the system and for this reason sensorless control methods started...... are dependent on the phase currents and rotor position. Based on the flux linkages the differential inductances are determined and used to establish the inductance saliency in terms of ratio and orientation. The orientation and its dependence on the current and rotor position are used to analyse the behaviour...

Characterizing permanent magnet blocks with Helmholtz coils

Science.gov (United States)

Carnegie, D. W.; Timpf, J.

1992-08-01

Most of the insertion devices to be installed at the Advanced Photon Source will utilize permanent magnets in their magnetic structures. The quality of the spectral output is sensitive to the errors in the field of the device which are related to variations in the magnetic properties of the individual blocks. The Advanced Photon Source will have a measurement facility to map the field in the completed insertion devices and equipment to test and modify the magnetic strength of the individual magnet blocks. One component of the facility, the Helmholtz coil permanent magnet block measurement system, has been assembled and tested. This system measures the total magnetic moment vector of a block with a precision better than 0.01% and a directional resolution of about 0.05°. The design and performance of the system will be presented.

Permanent magnet finger-size scanning electron microscope columns

Energy Technology Data Exchange (ETDEWEB)

Nelliyan, K., E-mail: elenk@nus.edu.sg [Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576 (Singapore); Khursheed, A. [Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576 (Singapore)

2011-07-21

This paper presents permanent magnet scanning electron microscope (SEM) designs for both tungsten and field emission guns. Each column makes use of permanent magnet technology and operates at a fixed primary beam voltage. A prototype column operating at a beam voltage of 15 kV was made and tested inside the specimen chamber of a conventional SEM. A small electrostatic stigmator unit and dedicated scanning coils were integrated into the column. The scan coils were wound directly around the objective lens iron core in order to reduce its size. Preliminary experimental images of a test grid specimen were obtained through the prototype finger-size column, demonstrating that it is in principle feasible.

Permanent magnet finger-size scanning electron microscope columns

International Nuclear Information System (INIS)

Nelliyan, K.; Khursheed, A.

2011-01-01

This paper presents permanent magnet scanning electron microscope (SEM) designs for both tungsten and field emission guns. Each column makes use of permanent magnet technology and operates at a fixed primary beam voltage. A prototype column operating at a beam voltage of 15 kV was made and tested inside the specimen chamber of a conventional SEM. A small electrostatic stigmator unit and dedicated scanning coils were integrated into the column. The scan coils were wound directly around the objective lens iron core in order to reduce its size. Preliminary experimental images of a test grid specimen were obtained through the prototype finger-size column, demonstrating that it is in principle feasible.

Lawful Permanent Residents Fiscal Year 2016 Core Based Statistical Area (CBSA) of Residence

Data.gov (United States)

Department of Homeland Security — Lawful permanet residents (LPRs) are foreign nationals who have been gratned the right to reside permanently in the United States. LPRs are also known as 'permanent...

Radioelement gauges. Appliances intended for permanent installation

International Nuclear Information System (INIS)

1975-08-01

The present norm defines for radioelement gauges intended for permanent installation: a classification of instruments and beam shutter devices; recommended construction techniques which satisfy health physics requirements; monitoring and test methods; information which must appear on the instruments [fr

Permanent deformation testing for a new South African mechanistic pavement design method

CSIR Research Space (South Africa)

Anochie-Boateng, Joseph

2012-01-01

Full Text Available is to develop test protocols for hot-mix asphalt materials. To date, no permanent deformation test is incorporated into South African pavement design guides. The objective of this paper is to present the development process of a repeated load axial permanent...

Design and characterization of permanent magnetic solenoids for REGAE

International Nuclear Information System (INIS)

Hachmann, M.; Flöttmann, K.; Gehrke, T.; Mayet, F.

2016-01-01

REGAE is a small electron linear accelerator at DESY. In order to focus short and low charged electron bunches down to a few μm permanent magnetic solenoids were designed, assembled and field measurements were done. Due to a shortage of space close to the operation area an in-vacuum solution has been chosen. Furthermore a two-ring design made of wedges has been preferred in terms of beam dynamic issues. To keep the field quality of a piecewise built magnet still high a sorting algorithm for the wedge arrangement including a simple magnetic field model has been developed and used for the construction of the magnets. The magnetic field of these solenoids has been measured with high precision and compared to simulations. - Highlights: • presenting a two-ring radially magnetized permanent magnetic solenoid design. • development of a analytical field description and field quality factor. • development of a sorting algorithm for permanent magnetic pieces to form a magnet. • performing a high-precision field measurement of a high gradient field.

Rotating permanent magnet excitation for blood flow measurement.

Science.gov (United States)

Nair, Sarath S; Vinodkumar, V; Sreedevi, V; Nagesh, D S

2015-11-01

A compact, portable and improved blood flow measurement system for an extracorporeal circuit having a rotating permanent magnetic excitation scheme is described in this paper. The system consists of a set of permanent magnets rotating near blood or any conductive fluid to create high-intensity alternating magnetic field in it and inducing a sinusoidal varying voltage across the column of fluid. The induced voltage signal is acquired, conditioned and processed to determine its flow rate. Performance analysis shows that a sensitivity of more than 250 mV/lpm can be obtained, which is more than five times higher than conventional flow measurement systems. Choice of rotating permanent magnet instead of an electromagnetic core generates alternate magnetic field of smooth sinusoidal nature which in turn reduces switching and interference noises. These results in reduction in complex electronic circuitry required for processing the signal to a great extent and enable the flow measuring device to be much less costlier, portable and light weight. The signal remains steady even with changes in environmental conditions and has an accuracy of greater than 95%. This paper also describes the construction details of the prototype, the factors affecting sensitivity and detailed performance analysis at various operating conditions.

Evaluation of permanent alopecia in pediatric medulloblastoma patients treated with proton radiation

International Nuclear Information System (INIS)

Min, Chul Hee; Paganetti, Harald; Winey, Brian A; Adams, Judith; MacDonald, Shannon M; Tarbell, Nancy J; Yock, Torunn I

2014-01-01

To precisely calculate skin dose and thus to evaluate the relationship between the skin dose and permanent alopecia for pediatric medulloblastoma patients treated with proton beams. The dosimetry and alopecia outcomes of 12 children with medulloblastoma (ages 4-15 years) comprise the study cohort. Permanent alopecia was assessed and graded after completion of the entire therapy. Skin threshold doses of permanent alopecia were calculated based on the skin dose from the craniospinal irradiation (CSI) plan using the concept of generalized equivalent uniform dose (gEUD) and accounting for chemotherapy intensity. Monte Carlo simulations were employed to accurately assess uncertainties due to beam range prediction and secondary particles. Increasing the dose of the CSI field or the dose given by the boost field to the posterior fossa increased total skin dose delivered in that region. It was found that permanent alopecia could be correlated with CSI dose with a threshold of about 21 Gy (relative biological effectiveness, RBE) with high dose chemotherapy and 30 Gy (RBE) with conventional chemotherapy. Our results based on 12 patients provide a relationship between the skin dose and permanent alopecia for pediatric medulloblastoma patients treated with protons. The alopecia risk as assessed with gEUD could be predicted based on the treatment plan information

Hair cortisol predicts object permanence performance in infant rhesus macaques (Macaca mulatta).

Science.gov (United States)

Dettmer, Amanda M; Novak, Matthew F S X; Novak, Melinda A; Meyer, Jerrold S; Suomi, Stephen J

2009-12-01

Although high circulating levels of glucocorticoids are associated with impaired cognitive performance in adults, less is known about this relationship in infancy. Furthermore, because studies have relied on acute cortisol measures in blood plasma or saliva, interpretation of the results may be difficult as acute measures may in part reflect emotional responses to testing procedures. In this study we examined whether hair cortisol, an integrated measure of hypothalamic-pituitary-adrenal (HPA) axis functioning, predicted performance of nursery-reared (NR) infant rhesus monkeys (n = 32) on Piagetian object permanence tasks. Testing of NR infants began at 19.8 +/- 2.2 (mean +/- SE) days of age and continued for the next several months. Hair cortisol concentrations from the 32 NR monkeys were compared to those of 20 mother-peer-reared (MPR) infants. Hair was shaved at Day 14, allowed to regrow, and obtained again at month 6, thus representing integrated cortisol over a 5.5-month period of time. NR and MPR infants did not differ in month 6 hair cortisol values (t((50)) = 0.02, p = 0.98). Linear regression revealed that hair cortisol predicted object permanence performance in the NR infants. Infants with higher hair cortisol reached criterion at later ages on the well (p < 0.01), screen (p < 0.05), and A-not-B (p < 0.05) tasks and required more test sessions to complete the well (p < 0.01) and screen tasks (p < 0.05). These data are the first to implicate hair cortisol as a reliable predictor of early cognitive performance in infant macaque monkeys.

Tubular permanent magnet actuators: cogging forces characterization

NARCIS (Netherlands)

Paulides, J.J.H.; Janssen, J.L.G.; Encica, L.; Lomonova, E.A.

2009-01-01

Tubular permanent magnet actuators are evermore used in demanding industrial and automotive applications. However, these actuators can suffer from large cogging forces, which have a destabilizing effect on the servo control system and compromise position and speed control accuracy. This paper

Analysis and optimization of hybrid excitation permanent magnet synchronous generator for stand-alone power system

Energy Technology Data Exchange (ETDEWEB)

Wang, Huijun, E-mail: huijun024@gmail.com [School of Instrumentation Science and Opto-electronics Engineering, Beihang University (China); Qu, Zheng; Tang, Shaofei; Pang, Mingqi [School of Instrumentation Science and Opto-electronics Engineering, Beihang University (China); Zhang, Mingju [Shanghai Aerospace Control Technology Institute, Shanghai (China)

2017-08-15

Highlights: • One novel permanent magnet generator structure has been proposed to reduce voltage regulation ratio. • Finite element method and equivalent circuit methods are both employed to realize rapid generator design. • Design of experiment (DOE) method is used to optimize permanent magnet shape for reduce voltage waveform distortion. • The obtained analysis and experiment results verify the proposed design methods. - Abstract: In this paper, electromagnetic design and permanent magnet shape optimization for permanent magnet synchronous generator with hybrid excitation are investigated. Based on generator structure and principle, design outline is presented for obtaining high efficiency and low voltage fluctuation. In order to realize rapid design, equivalent magnetic circuits for permanent magnet and iron poles are developed. At the same time, finite element analysis is employed. Furthermore, by means of design of experiment (DOE) method, permanent magnet is optimized to reduce voltage waveform distortion. Finally, the validity of proposed design methods is validated by the analytical and experimental results.

Analysis and optimization of hybrid excitation permanent magnet synchronous generator for stand-alone power system

International Nuclear Information System (INIS)

Wang, Huijun; Qu, Zheng; Tang, Shaofei; Pang, Mingqi; Zhang, Mingju

2017-01-01

Highlights: • One novel permanent magnet generator structure has been proposed to reduce voltage regulation ratio. • Finite element method and equivalent circuit methods are both employed to realize rapid generator design. • Design of experiment (DOE) method is used to optimize permanent magnet shape for reduce voltage waveform distortion. • The obtained analysis and experiment results verify the proposed design methods. - Abstract: In this paper, electromagnetic design and permanent magnet shape optimization for permanent magnet synchronous generator with hybrid excitation are investigated. Based on generator structure and principle, design outline is presented for obtaining high efficiency and low voltage fluctuation. In order to realize rapid design, equivalent magnetic circuits for permanent magnet and iron poles are developed. At the same time, finite element analysis is employed. Furthermore, by means of design of experiment (DOE) method, permanent magnet is optimized to reduce voltage waveform distortion. Finally, the validity of proposed design methods is validated by the analytical and experimental results.

Automatic design of permanent magnet coupling

International Nuclear Information System (INIS)

Yonnet, J.-P.; Pandele, P.; Coutel, C.; Wurtz, F.

1998-01-01

Up to now, two main methods have been used to design permanent magnet couplings : finite element calculation, and analytical expressions of the forces between the magnets. The two methods use the same starting point, the permanent magnet coupling dimensions. The calculated parameters are the forces and the torques. The optimization of the couplings shape is generally done by using different curves describing torque variations as a function of the different geometrical parameters. We have developed a very new approach solving the reverse problem. Choosing the value of the torque, the airgap and an optimization criterium, the new method automatically calculates the size of the magnets and the ideal number of poles. It is based on a software, PASCOSMA, using an analytical model of the coupling which can be eventually corrected by a finite element method like FLUX2D. The coupling optimization is automatically made, keeping the parameters between predefined values. For a given application, it is very easy to obtain the best design, for example with the minimum magnet volume. (orig.)

Eruption of first permanent incisors and live weight gain in grazing yearling Angora goats.

Science.gov (United States)

McGregor, B A; Butler, K L

2013-05-01

To investigate the effects of the timing and duration of eruption of the first permanent incisors, live weight, sex and other factors on contemporaneous live weight gain in Angora goats. Goats were previously part of a pen study on the effects of energy intake of Angora does during pregnancy and lactation on kid development. The design was 3 levels of nutrition in mid-pregnancy by 2 levels of postnatal nutrition in 17 randomised blocks. Artificial insemination, ultrasound examination and feeding does in pens enabled accurate conduct of the study. After weaning, goats were grazed in sex groups. Live weight change between 14 and 20 months of age was related to deciduous first incisor loss and permanent first incisor development and other attributes assessed before the study. Live weight change was related to the elapsed time for first permanent incisors to commence eruption and to the length of time for first permanent incisors to erupt. This response was affected by sex. Over summer and autumn, entire males with short eruption intervals gained 2-3 kg more than entire males with long eruption intervals. Females that reached first permanent incisor eruption by mid-summer had a live weight gain of 3 kg more than those that reached the same development 3 months later. Live weight change in yearling Angora goats was associated with the process of first permanent incisor eruption. In females, live weight gain was greater when first permanent incisor eruption was earlier. In males, live weight gain was greater when first permanent incisor eruption was faster. © 2013 The Authors. Australian Veterinary Journal © 2013 Australian Veterinary Association.

Use of permanent magnets in accelerator technology: Present and future

International Nuclear Information System (INIS)

Halbach, K.

1987-01-01

Permanent magnet systems have some generic properties that, under some circumstances, make them not only mildy preferable over electromagnets, but make it possible to do things that can not be done with any other technology. After a general discussion of these generic advantages, some specific permanent magnet systems will be described. Special emphasis will be placed on systems that have now, or are likely to have in the future, a significant impact on how some materials research is conducted

A neural substrate for object permanence in monkey inferotemporal cortex

OpenAIRE

Puneeth, NC; Arun, SP

2016-01-01

We take it for granted that objects continue to exist after being occluded. This knowledge ? known as object permanence ? is present even in childhood, but its neural basis is not fully understood. Here, we show that monkey inferior temporal (IT) neurons carry potential signals of object permanence even in animals that received no explicit behavioral training. We compared two conditions with identical visual stimulation: the same object emerged from behind an occluder as expected following it...