WorldWideScience

Sample records for aluminium 32

  1. Preparation of aluminium lakes by electrocoagulation

    OpenAIRE

    Prapai Pradabkham

    2008-01-01

    Aluminium lakes have been prepared by electrocoagulation employing aluminium as electrodes. The electrocoagulation is conducted in an aqueous alcoholic solution and is completed within one hour. The dye content in the lake ranges approximately between 4-32%.

  2. Fatal aluminium phosphide poisoning

    Directory of Open Access Journals (Sweden)

    Meena Mahesh Chand

    2015-06-01

    Full Text Available Aluminium phosphide (AlP is a cheap solid fumigant and a highly toxic pesticide which is commonly used for grain preservation. AlP has currently aroused interest with a rising number of cases in the past four decades due to increased use for agricultural and non-agricultural purposes. Its easy availability in the markets has increased also its misuse for committing suicide. Phosphine inhibits cellular oxygen utilization and can induce lipid peroxidation. Poisoning with AlP has often occurred in attempts to commit suicide, and that more often in adults than in teenagers. This is a case of suicidal consumption of aluminium phosphide by a 32-year-old young medical anesthetist. Toxicological analyses detected aluminium phosphide. We believe that free access of celphos tablets in grain markets should be prohibited by law.

  3. Aluminium bridges, aluminium bridge decks

    NARCIS (Netherlands)

    Soetens, F.; Straalen, IJ.J. van

    2003-01-01

    Applications of aluminium have grown considerably in building and civil engineering the last decade. In building and civil engineering the increase of aluminium applications is due to various aspects like light weight, durability and maintenance, use of extrusions, and esthetics. The paper starts wi

  4. Preparation of aluminium lakes by electrocoagulation

    Directory of Open Access Journals (Sweden)

    Prapai Pradabkham

    2008-07-01

    Full Text Available Aluminium lakes have been prepared by electrocoagulation employing aluminium as electrodes. The electrocoagulation is conducted in an aqueous alcoholic solution and is completed within one hour. The dye content in the lake ranges approximately between 4-32%.

  5. China’s Aluminium Consumption and the Related Policies

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    <正>China is a major aluminium consumer country in the world. In 2005, China produced 7.81 million tons aluminium and imported 640,000 tons. Meanwhile, China also exported 1.32 million tons aluminium in 2005. China’s apparent consumption of aluminium in 2005 was about 7.1 million tons, which was 9.3 times over that in 1990. China’s aluminium consumption growth has kept at an annual average of 16.1 per cent since 1990, which makes China the

  6. Aluminium in human sweat.

    Science.gov (United States)

    Minshall, Clare; Nadal, Jodie; Exley, Christopher

    2014-01-01

    It is of burgeoning importance that the human body burden of aluminium is understood and is measured. There are surprisingly few data to describe human excretion of systemic aluminium and almost no reliable data which relate to aluminium in sweat. We have measured the aluminium content of sweat in 20 healthy volunteers following mild exercise. The concentration of aluminium ranged from 329 to 5329μg/L. These data equate to a daily excretion of between 234 and 7192μg aluminium and they strongly suggest that perspiration is the major route of excretion of systemic aluminium in humans.

  7. Human exposure to aluminium.

    Science.gov (United States)

    Exley, Christopher

    2013-10-01

    Human activities have circumvented the efficient geochemical cycling of aluminium within the lithosphere and therewith opened a door, which was previously only ajar, onto the biotic cycle to instigate and promote the accumulation of aluminium in biota and especially humans. Neither these relatively recent activities nor the entry of aluminium into the living cycle are showing any signs of abating and it is thus now imperative that we understand as fully as possible how humans are exposed to aluminium and the future consequences of a burgeoning exposure and body burden. The aluminium age is upon us and there is now an urgent need to understand how to live safely and effectively with aluminium.

  8. Sustainable Aluminium Systems

    Directory of Open Access Journals (Sweden)

    Sergio R. Ermolli

    2010-09-01

    Full Text Available In the present paper, an analytical presentation of some popular aluminium systems that contribute to sustainability of structures is presented. Special emphasis has been given to the properties of aluminium, while the influence of these systems in the overall performance of the structure regarding environment and economy is described. In particular, characteristics of aluminium elements such as high reflectivity and recyclability and their role in life cycle analysis (LCA are analyzed. The connections between energy efficiency and conservation of buildings and aluminium application are also discussed. Building applications such as curtain walls, window frames and facade sheets are presented and thoroughly investigated, considering their environmental and economic aspects. Furthermore, many innovative techniques that use aluminium elements in collaboration with other systems in order to produce renewable energy, such as solar panels and photovoltaics, are introduced. Finally, environmental innovations such as optimized ventilation mechanisms and light and shade management systems based on aluminium members are presented.

  9. Rows of Dislocation Loops in Aluminium Irradiated by Aluminium Ions

    DEFF Research Database (Denmark)

    Henriksen, L.; Johansen, A.; Koch, J.

    1967-01-01

    Single-crystal aluminium specimens, irradiated with 50-keV aluminium ions, contain dislocation loops that are arranged in regular rows along <110 > directions. ©1967 The American Institute of Physics......Single-crystal aluminium specimens, irradiated with 50-keV aluminium ions, contain dislocation loops that are arranged in regular rows along directions. ©1967 The American Institute of Physics...

  10. Recovery in aluminium

    DEFF Research Database (Denmark)

    Gundlach, Carsten

    2006-01-01

    In the present thesis the development of a unique experimental method for volume characterisation of individual embedded crystallites down to a radius of 150 nm is presented. This method is applied to in-situ studies of recovery in aluminium. The method is an extension of 3DXRD microscopy, an X...... are represented as strings. To identify the strings a combination of a 5D connected component type algorithm and multi-peak fitting was found to be superior. The first use of the method was a study of recovery of a deformed aluminium alloy (AA1050). The aluminium alloy was deformed by cold rolling to a thickness...

  11. The cellular toxicity of aluminium.

    Science.gov (United States)

    Exley, C; Birchall, J D

    1992-11-07

    Aluminium is a serious environmental toxicant and is inimical to biota. Omnipresent, it is linked with a number of disorders in man including Alzheimer's disease, Parkinson's dementia and osteomalacia. Evidence supporting aluminium as an aetiological agent in such disorders is not conclusive and suffers principally from a lack of consensus with respect to aluminium's toxic mode of action. Obligatory to the elucidation of toxic mechanisms is an understanding of the biological availability of aluminium. This describes the fate of and response to aluminium in any biological system and is thus an important influence of the toxicity of aluminium. A general theme in much aluminium toxicity is an accelerated cell death. Herein mechanisms are described to account for cell death from both acute and chronic aluminium challenges. Aluminium associations with both extracellular surfaces and intracellular ligands are implicated. The cellular response to aluminium is found to be biphasic having both stimulatory and inhibitory components. In either case the disruption of second messenger systems is observed and GTPase cycles are potential target sites. Specific ligands for aluminium at these sites are unknown though are likely to be proteins upon which oxygen-based functional groups are orientated to give exceptionally strong binding with the free aluminium ion.

  12. Aluminium in human breast tissue.

    Science.gov (United States)

    Exley, Christopher; Charles, Lisa M; Barr, Lester; Martin, Claire; Polwart, Anthony; Darbre, Philippa D

    2007-09-01

    Aluminium is omnipresent in everyday life and increased exposure is resulting in a burgeoning body burden of this non-essential metal. Personal care products are potential contributors to the body burden of aluminium and recent evidence has linked breast cancer with aluminium-based antiperspirants. We have used graphite furnace atomic absorption spectrometry (GFAAS) to measure the aluminium content in breast biopsies obtained following mastectomies. The aluminium content of breast tissue and breast tissue fat were in the range 4-437 nmol/g dry wt. and 3-192 nmol/g oil, respectively. The aluminium content of breast tissue in the outer regions (axilla and lateral) was significantly higher (P=0.033) than the inner regions (middle and medial) of the breast. Whether differences in the regional distribution of aluminium in the breast are related to the known higher incidence of tumours in the outer upper quadrant of the breast remains to be ascertained.

  13. Fire exposed aluminium structures

    NARCIS (Netherlands)

    Maljaars, J.; Fellinger, J.H.H.; Soetens, F.

    2006-01-01

    Material properties and mechanical response models for fire design of steel structures are based on extensive research and experience. Contrarily, the behaviour of aluminium load bearing structures exposed to fire is relatively unexplored. This article gives an overview of physical and mechanical pr

  14. Aluminium and human breast diseases.

    Science.gov (United States)

    Darbre, P D; Pugazhendhi, D; Mannello, F

    2011-11-01

    The human breast is exposed to aluminium from many sources including diet and personal care products, but dermal application of aluminium-based antiperspirant salts provides a local long-term source of exposure. Recent measurements have shown that aluminium is present in both tissue and fat of the human breast but at levels which vary both between breasts and between tissue samples from the same breast. We have recently found increased levels of aluminium in noninvasively collected nipple aspirate fluids taken from breast cancer patients (mean 268 ± 28 μg/l) compared with control healthy subjects (mean 131 ± 10 μg/l) providing evidence of raised aluminium levels in the breast microenvironment when cancer is present. The measurement of higher levels of aluminium in type I human breast cyst fluids (median 150 μg/l) compared with human serum (median 6 μg/l) or human milk (median 25 μg/l) warrants further investigation into any possible role of aluminium in development of this benign breast disease. Emerging evidence for aluminium in several breast structures now requires biomarkers of aluminium action in order to ascertain whether the presence of aluminium has any biological impact. To this end, we report raised levels of proteins that modulate iron homeostasis (ferritin, transferrin) in parallel with raised aluminium in nipple aspirate fluids in vivo, and we report overexpression of mRNA for several S100 calcium binding proteins following long-term exposure of MCF-7 human breast cancer cells in vitro to aluminium chlorhydrate.

  15. Roll bonding of strained aluminium

    DEFF Research Database (Denmark)

    Staun, Jakob M.

    2003-01-01

    This report investigates roll bonding of pre-strained (å ~ 4) aluminium sheets to produce high strain material from high purity aluminium (99.996%) and commercial pure aluminium (99.6%). The degree of bonding is investigated by optical microscopy and ultrasonic scanning. Under the right...... of the cross rolled volume fraction is found. To further asses this effect, and the anisotropy, it is necessary to acquire knowledge about both texture and microstructure, e.g. by TEM. Roll bonding of pre-strained aluminium is found to be a possible alternative to ARB in the quest for ultra-fine grained...

  16. First Principles Study of Aluminium Vacancy in Wurtzite Aluminium Nitride

    Institute of Scientific and Technical Information of China (English)

    GAO Ting-Ge; YI Jue-Min; ZHOU Zi-Yao; HU Xiao-Dong

    2008-01-01

    @@ We report that the aluminium vacancy in wurtzite AIN brings about two impurity levels e and a2 in the band gap, not just one single t2 level The aluminium vacancy carries a magnetic moment of 1 μB in the ground state. The molecule orbit of the aluminium vacancy becomes e↑↑ a2↑ rather than e↑↑ a2↑. The calculation is carried out by using the CASTEP code. The intrinsic symmetry of wurtzite A1N is the driving force for this spin splitting. Finally the symmetry of wurtzite AlN results in an anti-ferromagnetic coupling between the aluminium vacancies, as is predicted. Our findings are helpful to gain a more through understanding of the structural and spin property of aluminium vacancy in wurtzite AIN.

  17. Fatigue tests on aluminium bridges

    NARCIS (Netherlands)

    Maljaars, J.; Soetens, F.; Straalen, IJ.J. van

    2004-01-01

    Traffic bridges are subjected to variable loads and should therefore be checked on fatigue. Especially low weight materials, like aluminium, are sensitive to fatigue, because the variable load is a substantial part of the total load. This paper shows the structural design of an aluminium bridge load

  18. Fatigue tests on aluminium bridges

    NARCIS (Netherlands)

    Maljaars, J.; Soetens, F.; Straalen, IJ.J. van

    2005-01-01

    Traffic bridges are subjected to variable loads and should therefore be checked on fatigue. Especially low weight materials, like aluminium, are sensitive to fatigue, because the variable load is a substantial part of the total load. This paper shows the structural design of an aluminium bridge load

  19. Aluminium in Drinkwater: voorkomen, herkomst en gezondheidsaspecten

    NARCIS (Netherlands)

    Versteegh JFM; de Boer JLM; van den Velde-Koerts T

    1992-01-01

    Aluminium can occur in drinking water because of the application of aluminium salts as a coagulant in the treatment of drinking water. In the Netherlands mostly iron salts are used instead of aluminium. Besides this aluminium can be present in the source for drinking water. In shallow groundwater

  20. Aluminium, antiperspirants and breast cancer.

    Science.gov (United States)

    Darbre, P D

    2005-09-01

    Aluminium salts are used as the active antiperspirant agent in underarm cosmetics, but the effects of widespread, long term and increasing use remain unknown, especially in relation to the breast, which is a local area of application. Clinical studies showing a disproportionately high incidence of breast cancer in the upper outer quadrant of the breast together with reports of genomic instability in outer quadrants of the breast provide supporting evidence for a role for locally applied cosmetic chemicals in the development of breast cancer. Aluminium is known to have a genotoxic profile, capable of causing both DNA alterations and epigenetic effects, and this would be consistent with a potential role in breast cancer if such effects occurred in breast cells. Oestrogen is a well established influence in breast cancer and its action, dependent on intracellular receptors which function as ligand-activated zinc finger transcription factors, suggests one possible point of interference from aluminium. Results reported here demonstrate that aluminium in the form of aluminium chloride or aluminium chlorhydrate can interfere with the function of oestrogen receptors of MCF7 human breast cancer cells both in terms of ligand binding and in terms of oestrogen-regulated reporter gene expression. This adds aluminium to the increasing list of metals capable of interfering with oestrogen action and termed metalloestrogens. Further studies are now needed to identify the molecular basis of this action, the longer term effects of aluminium exposure and whether aluminium can cause aberrations to other signalling pathways in breast cells. Given the wide exposure of the human population to antiperspirants, it will be important to establish dermal absorption in the local area of the breast and whether long term low level absorption could play a role in the increasing incidence of breast cancer.

  1. The toxicity of aluminium in humans.

    Science.gov (United States)

    Exley, C

    2016-06-01

    We are living in the 'aluminium age'. Human exposure to aluminium is inevitable and, perhaps, inestimable. Aluminium's free metal cation, Alaq(3+), is highly biologically reactive and biologically available aluminium is non-essential and essentially toxic. Biologically reactive aluminium is present throughout the human body and while, rarely, it can be acutely toxic, much less is understood about chronic aluminium intoxication. Herein the question is asked as to how to diagnose aluminium toxicity in an individual. While there are as yet, no unequivocal answers to this problem, there are procedures to follow to ascertain the nature of human exposure to aluminium. It is also important to recognise critical factors in exposure regimes and specifically that not all forms of aluminium are toxicologically equivalent and not all routes of exposure are equivalent in their delivery of aluminium to target sites. To ascertain if Alzheimer's disease is a symptom of chronic aluminium intoxication over decades or breast cancer is aggravated by the topical application of an aluminium salt or if autism could result from an immune cascade initiated by an aluminium adjuvant requires that each of these is considered independently and in the light of the most up to date scientific evidence. The aluminium age has taught us that there are no inevitabilities where chronic aluminium toxicity is concerned though there are clear possibilities and these require proving or discounting but not simply ignored.

  2. Effect of aluminium on migratory and invasive properties of MCF-7 human breast cancer cells in culture.

    Science.gov (United States)

    Darbre, Philippa D; Bakir, Ayse; Iskakova, Elzira

    2013-11-01

    Aluminium (Al) has been measured in human breast tissue, nipple aspirate fluid and breast cyst fluid, and recent studies have shown that at tissue concentrations, aluminium can induce DNA damage and suspension growth in human breast epithelial cells. This paper demonstrates for the first time that exposure to aluminium can also increase migratory and invasive properties of MCF-7 human breast cancer cells. Long-term (32 weeks) but not short-term (1 week) exposure of MCF-7 cells to 10(-4) M aluminium chloride or 10(-4) M aluminium chlorohydrate increased motility of the cells as measured by live cell imaging (cumulative length moved by individual cells), by a wound healing assay and by migration in real time through 8 μm pores of a membrane using xCELLigence technology. Long-term exposure (37 weeks) to 10(-4) M aluminium chloride or 10(-4) M aluminium chlorohydrate also increased the ability of MCF-7 cells to invade through a matrigel layer as measured in real time using the xCELLigence system. Although molecular mechanisms remain to be characterized, the ability of aluminium salts to increase migratory and invasive properties of MCF-7 cells suggests that the presence of aluminium in the human breast could influence metastatic processes. This is important because mortality from breast cancer arises mainly from tumour spread rather than from the presence of a primary tumour in the breast.

  3. Dispersion strengthening of aluminium-aluminium-oxide products

    DEFF Research Database (Denmark)

    Hansen, Niels

    1970-01-01

    The true stress-true strain curves at room temperature and at 400°C were determined for various types of aluminium-aluminium-oxide products containing from 0.2 to 4.7 weight per cent of aluminium oxide. The effect of particles on the initial flow stress and the flow stress for 0.2% offset at room...... temperature and at 400°C is in agreement with Orowan's theory. The increase in flow stress at room temperature for strain values below 3 per cent was related to the plastic strain by the equation σ-σoy=k1ε 1/2, where σoy is the initial flow stress and where k1 increases for increasing volume fraction...... and decreasing particle size of the dispersed particles. A general expression for k1 was derived for the relationship between the dislocation density and the strain in dispersion-strengthened products...

  4. Alloys of uranium and aluminium with low aluminium content; Alliages uranium-aluminium a faible teneur en aluminium

    Energy Technology Data Exchange (ETDEWEB)

    Cabane, G.; Englander, M.; Lehmann, J. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1955-07-01

    Uranium, as obtained after spinning in phase {gamma}, presents an heterogeneous structure with large size grains. The anisotropic structure of the metal leads to an important buckling and surface distortion of the fuel slug which is incompatible with its tubular cladding for nuclear fuel uses. Different treatments have been made to obtain an isotropic structure presenting high thermal stability (laminating, hammering and spinning in phase {alpha}) without success. Alloys of uranium and aluminium with low aluminium content present important advantage in respect of non allied uranium. The introduction of aluminium in the form of intermetallic compound (UAl{sub 2}) gives a better resistance to thermal fatigue. Alloys obtained from raw casting present an improved buckling and surface distortion in respect of pure uranium. This improvement is obtained with uranium containing between 0,15 and 0,5 % of aluminium. An even more improvement in thermal stability is obtained by thermal treatments of these alloys. These new characteristics are explained by the fine dispersion of the UAl{sub 2} particles in uranium. The results after treatments obtained from an alloy slug containing 0,4 % of aluminium show no buckling or surface distortion and no elongation. (M.P.)

  5. Design and analysis of aluminium brdiges

    NARCIS (Netherlands)

    Soetens, F.; Straalen, IJ.J. van

    2004-01-01

    Applications of aluminium have grown considerably in building and civil engineering the last decade, which is due to various aspects: light weight, durability and maintenance, use of extrusions. The paper starts with a short history of aluminium bridges and then focuses on aluminium bridges in the N

  6. Buckwheat stomatal traits under aluminium toxicity

    Directory of Open Access Journals (Sweden)

    Oleksandr E. Smirnov

    2014-04-01

    Full Text Available Aluminium influence on some stomatal parameters of common buckwheat (Fagopyrum esculentum Moench. was studied. Significant changes in stomatal density, stomatal index and stomatal shape coefficient under aluminium treatment were revealed. Stomatal closure and no difference in total stomatal potential conductance index of treatment plants were suggested as aluminium resistance characteristics.

  7. Effect of hydrogen on aluminium and aluminium alloys: A review

    DEFF Research Database (Denmark)

    Ambat, Rajan; Dwarakadasa, E.S.

    1996-01-01

    in aluminium and its alloys and its effect on mechanical properties. The importance of hydrogen embrittlement over anodic dissolution to explain the stress corrosion cracking mechanism of these alloys is also examined in considerable detail. The various experimental findings concerning the link between...

  8. Mechanism of Nickel-Aluminium Alloy Electroplating

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    The effect of operating conditions on the aluminium content of Ni-Al alloy deposit and the catalytic function of NaF on electrodeposition in the nonaqueous solution containing aluminium are investigated.The results indicate that the plated aluminuim content will be increased with the rise of current density in a given range.When the current density is 2.5A/dm2,nickle-aluminium alloy containing 13.1 wt% aluminium will be deposited.The plated aluminium content will be increased by 2wt% as 0.1mol/L NaF is added to the bath.

  9. Microchemistry in aluminium sheet production

    NARCIS (Netherlands)

    Lok, Z.J.

    2005-01-01

    The production of aluminium sheet alloys from as-cast ingots is a complex process, involving several rolling operations in combination with various thermal heat treatments. Through their influence on the alloy microchemistry and microstructure, these thermomechanical treatments are all aimed at cont

  10. Bumblebee pupae contain high levels of aluminium.

    Directory of Open Access Journals (Sweden)

    Christopher Exley

    Full Text Available The causes of declines in bees and other pollinators remains an on-going debate. While recent attention has focussed upon pesticides, other environmental pollutants have largely been ignored. Aluminium is the most significant environmental contaminant of recent times and we speculated that it could be a factor in pollinator decline. Herein we have measured the content of aluminium in bumblebee pupae taken from naturally foraging colonies in the UK. Individual pupae were acid-digested in a microwave oven and their aluminium content determined using transversely heated graphite furnace atomic absorption spectrometry. Pupae were heavily contaminated with aluminium giving values between 13.4 and 193.4 μg/g dry wt. and a mean (SD value of 51.0 (33.0 μg/g dry wt. for the 72 pupae tested. Mean aluminium content was shown to be a significant negative predictor of average pupal weight in colonies. While no other statistically significant relationships were found relating aluminium to bee or colony health, the actual content of aluminium in pupae are extremely high and demonstrate significant exposure to aluminium. Bees rely heavily on cognitive function and aluminium is a known neurotoxin with links, for example, to Alzheimer's disease in humans. The significant contamination of bumblebee pupae by aluminium raises the intriguing spectre of cognitive dysfunction playing a role in their population decline.

  11. Bumblebee pupae contain high levels of aluminium.

    Science.gov (United States)

    Exley, Christopher; Rotheray, Ellen; Goulson, David

    2015-01-01

    The causes of declines in bees and other pollinators remains an on-going debate. While recent attention has focussed upon pesticides, other environmental pollutants have largely been ignored. Aluminium is the most significant environmental contaminant of recent times and we speculated that it could be a factor in pollinator decline. Herein we have measured the content of aluminium in bumblebee pupae taken from naturally foraging colonies in the UK. Individual pupae were acid-digested in a microwave oven and their aluminium content determined using transversely heated graphite furnace atomic absorption spectrometry. Pupae were heavily contaminated with aluminium giving values between 13.4 and 193.4 μg/g dry wt. and a mean (SD) value of 51.0 (33.0) μg/g dry wt. for the 72 pupae tested. Mean aluminium content was shown to be a significant negative predictor of average pupal weight in colonies. While no other statistically significant relationships were found relating aluminium to bee or colony health, the actual content of aluminium in pupae are extremely high and demonstrate significant exposure to aluminium. Bees rely heavily on cognitive function and aluminium is a known neurotoxin with links, for example, to Alzheimer's disease in humans. The significant contamination of bumblebee pupae by aluminium raises the intriguing spectre of cognitive dysfunction playing a role in their population decline.

  12. Friction Welding of Aluminium and Aluminium Alloys with Steel

    Directory of Open Access Journals (Sweden)

    Andrzej Ambroziak

    2014-01-01

    Full Text Available The paper presents our actual knowledge and experience in joining dissimilar materials with the use of friction welding method. The joints of aluminium and aluminium alloys with the different types of steel were studied. The structural effects occurring during the welding process were described. The mechanical properties using, for example, (i microhardness measurements, (ii tensile tests, (iii bending tests, and (iv shearing tests were determined. In order to obtain high-quality joints the influence of different configurations of the process such as (i changing the geometry of bonding surface, (ii using the interlayer, or (iii heat treatment was analyzed. Finally, the issues related to the selection of optimal parameters of friction welding process were also investigated.

  13. Aluminium in Allergies and Allergen immunotherapy.

    Science.gov (United States)

    Jensen-Jarolim, Erika

    2015-01-01

    Aluminium is a hot topic in the current debate. Exposure occurs due to environmental, dietary and intentional exposure to aluminium, such as in vaccines where it was introduced in 1926. In spite of the fact that it is a typical Th2 adjuvant, aluminium redirects the immune response in systemic allergen immunotherapy (SIT) upon prolonged immunization. SIT in the US, and SLIT in general, are at present non-adjuvanted therapies, but in Europe aluminium is used as adjuvant in most SIT preparations. It enhances the safety of SIT by local deposition of the allergen. Undesired properties of aluminium adjuvants comprise acute and chronic inflammation at the injection site, its Th2 immune stimulatory capacity, its accumulation besides biodistribution in the body. The adjuvant and safety profile of aluminium adjuvants in allergy vaccines are discussed, as well as the need for putting modern delivery systems and adjuvants on the fast track.

  14. Aluminium and nickel in human albumin solutions

    DEFF Research Database (Denmark)

    Gammelgaard, Bente; Sandberg, E

    1989-01-01

    Five different brands of commercially available human albumin solutions for infusion were analysed for their aluminium and nickel contents by atomic absorption spectrometry. The aluminium concentrations ranged from 12 micrograms/l to 1109 micrograms/l and the nickel concentrations ranged from 17...... micrograms/l to 77 micrograms/l. Examination of the aluminium and nickel contents of the constituents for the production of one brand showed too low levels to explain the final contamination of the product. By following the aluminium and nickel concentrations of the same brand during the production...... of a batch of albumin solution, filtration was shown to contribute to contamination, although the largest increase in aluminium as well as nickel concentrations appeared during the bulk concentrating process. To avoid health risks to certain patients, regulations should be established requiring aluminium...

  15. Dietary aluminium Intake Level for Rent Animals in a Primary and Secondary Aluminium Industry Surrounding Area

    OpenAIRE

    2010-01-01

    The study was carried out in an aluminium industry surrounding area on purpose to evaluate dietary aluminium intake level for rent animals originated from fodder and water consumed by them. There were taken feed and water samples in different periods and from increasing distances from industrial platform, determined the aluminium level by atomic spectroscopy and calculated the rations for cattle and poultry. Conclusions: aluminium dietary intake level by ration depends by forage period for st...

  16. Toxicity of aluminium on five aquatic invertebrates; Aluminiums toksisitet paa 5 akvatiske invertebrater

    Energy Technology Data Exchange (ETDEWEB)

    Moe, J. [Oslo Univ. (Norway)

    1996-01-01

    The conference paper deals with the experiments done by investigating the effects from the toxicity of aluminium on aquatic invertebrates. The aim of the experiments was to compare the toxicity of unstable aluminium compounds with stable forms of aluminium. 8 refs., 2 figs., 2 tabs.

  17. A biogeochemical cycle for aluminium?

    Science.gov (United States)

    Exley, Christopher

    2003-09-15

    The elaboration of biogeochemical cycles for elements which are known to be essential for life has enabled a broad appreciation of the homeostatic mechanisms which underlie element essentiality. In particular they can be used effectively to identify any part played by human activities in element cycling and to predict how such activities might impact upon the lithospheric and biospheric availability of an element in the future. The same criteria were the driving force behind the construction of a biogeochemical cycle for aluminium, a non-essential element which is a known ecotoxicant and a suspected health risk in humans. The purpose of this exercise was to examine the concept of a biogeochemical cycle for aluminium and not to review the biogeochemistry of this element. The cycle as presented is rudimentary and qualitative though, even in this nascent form, it is informative and predictive and, for these reasons alone, it is deserving of future quantification. A fully fledged biogeochemical cycle for aluminium should explain the biospheric abundance of this element and whether we should expect its (continued) active involvement in biochemical evolution.

  18. Partial molar volumes of aluminium chloride, aluminium sulphate and aluminium nitrate in water-rich binary aqueous mixtures of tetrahydrofuran

    Directory of Open Access Journals (Sweden)

    R. C. Thakur

    2014-12-01

    Full Text Available Partial molar volumes of aluminium chloride, aluminium sulphate and aluminium nitrate have been determined in water rich binary aqueous mixtures of tetrahydrofuran (5, 10, 15, 20% by weight of tetrahydrofuran with the help of density measurements. The density measurements were made by using Ward and Millero method and results have been analysed by Masson’s equation and interpreted in terms of ion-ion or ion –solvent interactions. The partial molar volumes vary with temperature as a power series of temperature. Structure making or breaking capacities of aluminium salts have been inferred from the sign à2/ Φvo p i.e second derivative of partial molar volume with respect to temperature at constant pressure. The aluminium salts have been found as structure breakers in binary aqueous mixture of tetrahydrofuran.

  19. Novel Synthesis of Aluminium Oxide Nanofibers

    Science.gov (United States)

    2001-11-01

    UNCLASSIFIED Defense Technical Information Center Compilation Part Notice ADP012177 TITLE: Novel Synthesis of Aluminium Oxide Nanofibers DISTRIBUTION...ADP012174 thru ADP012259 UNCLASSIFIED Mat. Res. Soc. Symp. Proc. Vol. 703 © 2002 Materials Research Society V1.8 Novel Synthesis of Aluminium Oxide Nanofibers

  20. Lactobacillus plantarum CCFM639 alleviates aluminium toxicity.

    Science.gov (United States)

    Yu, Leilei; Zhai, Qixiao; Liu, Xiaoming; Wang, Gang; Zhang, Qiuxiang; Zhao, Jianxin; Narbad, Arjan; Zhang, Hao; Tian, Fengwei; Chen, Wei

    2016-02-01

    Aluminium (Al) is the most abundant metal in the earth's crust. Al exposure can cause a variety of adverse physiological effects in humans and animals. Our aim was to demonstrate that specific probiotic bacteria can play a special physiologically functional role in protection against Al toxicity in mice. Thirty strains of lactic acid bacteria (LAB) were tested for their aluminium-binding ability, aluminium tolerance, their antioxidative capacity, and their ability to survive the exposure to artificial gastrointestinal (GI) juices. Lactobacillus plantarum CCFM639 was selected for animal experiments because of its excellent performance in vitro. Forty mice were divided into four groups: control, Al only, Al plus CCFM639, and Al plus deferiprone (DFP). CCFM639 was administered at 10(9) CFU once daily for 10 days, followed by a single oral dose of aluminium chloride hexahydrate at 5.14 mg aluminium (LD50) for each mouse. The results showed that CCFM639 treatment led to a significant reduction in the mortality rates with corresponding decrease in intestinal aluminium absorption and in accumulation of aluminium in the tissues and amelioration of hepatic histopathological damage. This probiotic treatment also resulted in alleviation of hepatic, renal, and cerebral oxidative stress. The treatment of L. plantarum CCFM639 has potential as a therapeutic dietary strategy against acute aluminium toxicity.

  1. Locale instabiliteit van aluminium constructiedelen bij brand

    NARCIS (Netherlands)

    Maljaars, J.; Soetens, F.

    2006-01-01

    Dragende constructiedelen van aluminium legeringen, zoals toegepast in bouwconstructies maar ook in schepen en offshore platforms, moeten zodanig ontworpen worden dat mensen veilig kunnen vluchten als er brand uitbreekt. Door de lage smelttemperatuur van aluminium vraagt brand de nodige aandacht in

  2. Rapidly solidified aluminium for optical applications

    NARCIS (Netherlands)

    Gubbels, G.P.H.; Venrooy, B.W.H. van; Bosch, A.J.; Senden, R.

    2008-01-01

    This paper present the results of a diamond turning study of a rapidly solidified aluminium 6061 alloy grade, known as RSA6061. It is shown that this small grain material can be diamond turned to smaller roughness values than standard AA6061 aluminium grades. Also, the results are nearly as good as

  3. Acoustic properties of aluminium foams

    Directory of Open Access Journals (Sweden)

    García, L. E.

    2008-09-01

    Full Text Available The article discusses normal incidence sound absorption by aluminium foam manufactured with powder metallurgy technology. Aluminium foams with different surface morphologies were obtained by varying the type of precursor and adding filler materials during the foaming process. The sound absorption coefficients found for these aluminium foams were compared to the coefficient for commercial foams marketed under the name ALPORAS. The effect of foam thickness on the absorption coefficient was studied for each sample prepared. The combination of good acoustic and mechanical properties makes aluminium foams particularly attractive products. The study included an analysis of the effect of 2-, 5- and 10-cm air gaps on the sound absorption coefficient. The results showed that such gaps, which are routinely used in construction to reduce the reverberation period in indoor premises, raised the low frequency absorption coefficient significantly. This increase was found to depend on aluminium foam density and thickness and the depth of the air gap. In this same line, we have investigated the absorption coefficient of the aluminium foams combined with a mineral fiber panel.Se presenta un estudio del coeficiente de absorción acústica a incidencia normal de espumas de aluminio fabricadas mediante la técnica pulvimetalúrgica. Se fabricaron espumas de aluminio de distinta morfología superficial variando el tipo de precursor y usando materiales de relleno durante el proceso de espumación. Se muestra un estudio comparativo del coeficiente de absorción acústica de las espumas de aluminio fabricadas y las espumas comerciales conocidas como ALPORAS. Para cada muestra fabricada se estudió la influencia del espesor sobre el valor del coeficiente de absorción.El atractivo de las espumas de aluminio radica en que en ellas se combinan interesantes propiedades acústicas y mecánicas. Se analizó el efecto de una cámara de aire de 2, 5 y 10 cm de anchura sobre el

  4. Aluminium Diphosphamethanides: Hidden Frustrated Lewis Pairs.

    Science.gov (United States)

    Styra, Steffen; Radius, Michael; Moos, Eric; Bihlmeier, Angela; Breher, Frank

    2016-07-04

    The synthesis and characterisation of two aluminium diphosphamethanide complexes, [Al(tBu)2 {κ(2) P,P'-Mes*PCHPMes*}] (3) and [Al(C6 F5 )2 {κ(2) P,P'-Mes*PCHPMes*}] (4), and the silylated analogue, Mes*PCHP(SiMe3 )Mes* (5), are reported. The aluminium complexes feature four-membered PCPAl core structures consisting of diphosphaallyl ligands. The silylated phosphine 5 was found to be a valuable precursor for the synthesis of 4 as it cleanly reacts with the diaryl aluminium chloride [(C6 F5 )2 AlCl]2 . The aluminium complex 3 reacts with molecular dihydrogen at room temperature under formation of the acyclic σ(2) λ(3) ,σ(3) λ(3) -diphosphine Mes*PCHP(H)Mes* and the corresponding dialkyl aluminium hydride [tBu2 AlH]3 . Thus, 3 belongs to the family of so-called hidden frustrated Lewis pairs.

  5. Hydroxyaluminosilicates and acute aluminium toxicity in fish

    Science.gov (United States)

    Exley; Pinnegar; Taylor

    1997-11-21

    The essentiality of silicon in biology might be explained in the terms of its chemistry with aluminium. In a previous study we demonstrated the elimination of acute aluminium toxicity in fish by silicon. We suggested that the reaction of silicic acid with aluminium to form hydroxyaluminosilicates reduced the biological availability, and hence toxicity, of aluminium. Though assumed in a burgeoning number of studies and contended in others this detoxification mechanism has remained unproven. Herein we have tested the toxicity of hydroxyaluminosilicates in fish and in doing so we have provided evidence which strongly supports a role for hydroxyaluminiosilicates in the elimination of acute aluminium toxicity in fish by silicon.Copyright 1997 Academic Press Limited Copyright 1997 Academic Press Limited

  6. A Reaction Coating on Aluminium Alloys by Laser Processing

    NARCIS (Netherlands)

    Zhou, X.B.; Hosson, J.Th.M. De

    1993-01-01

    An aluminium oxide layer of 100 µm in thickness has been successfully coated on aluminium alloy 6061 and pure aluminium using a powder mixture of silicon oxide and aluminium by laser processing. A strong Al/Al2O3 interface was formed. The exothermic chemical reaction between SiO2 and Al may promote

  7. Investigation of the aluminium-aluminium oxide reversible transformation as observed by hot stage electron microscopy.

    Science.gov (United States)

    Grove, C. A.; Judd, G.; Ansell, G. S.

    1972-01-01

    Thin foils of high purity aluminium and an Al-Al2O3 SAP type of alloy were oxidised in a specially designed hot stage specimen chamber in an electron microscope. Below 450 C, amorphous aluminium oxide formed on the foil surface and was first detectable at foil edges, holes, and pits. Islands of aluminium then nucleated in this amorphous oxide. The aluminium islands displayed either a lateral growth with eventual coalescence with other islands, or a reoxidation process which caused the islands to disappear. The aluminium island formation was determined to be related to the presence of the electron beam. A mechanism based upon electron charging due to the electron beam was proposed to explain the nucleation, growth, coalescence, disappearance, and geometry of the aluminium islands.

  8. Characteristics of cast and welded aluminium nodes

    Energy Technology Data Exchange (ETDEWEB)

    Oedegaard, J.; Polanco, M.; Syvertsen, F.; Sund, H. [SINTEF, Trondheim (Norway). Materials Technology

    2000-07-01

    It has been demonstrated that sand cast aluminium nodes can be produced with properties that gives competitive energy absorption capacity compared with welded aluminium nodes. Sand cast nodes could be mass-produced to a low cost and with properties that should be competitive to the properties of fusion welded nodes. This may open for simpler and more cost-effective joint alternatives when production of aluminium space-frames and subassemblies are in focus. Cast nodes joined to extruded members by adhesive bonding could be one example. (orig.)

  9. Thermal transformations of aluminium-aluminium oxide systems in nanosize layers

    OpenAIRE

    2007-01-01

    Aluminium film of more than 2 nm thick indicates, but less than 2 nm do not indicate characteristic absorption and reflection bands for aluminium in range ?=190...1100 nm. By spectrophotometric, gravimetric and microscopic methods it is stated that thickness, mass and absorption, reflection spectrum of aluminium films (d=2...200 nm) undergo considerable transformations as a result of heat treatment in an interval of temperatures 373...600 K during 1...140 min in atmospheric conditions. Kineti...

  10. Elevated brain aluminium and early onset Alzheimer’s disease in an individual occupationally exposed to aluminium: a case report

    OpenAIRE

    2014-01-01

    Introduction Aluminium is a known neurotoxin and occupational exposure to aluminium has been implicated in neurological disease including Alzheimer’s disease. Here we present the first comprehensive and unequivocal data demonstrating significantly elevated brain aluminium content in an individual occupationally exposed to aluminium. Case presentation A 66-year-old Caucasian man who died with Alzheimer’s disease showed significantly elevated brain aluminium content, 2.98 (2.73) μg/g dry weight...

  11. Dietary aluminium Intake Level for Rent Animals in a Primary and Secondary Aluminium Industry Surrounding Area

    Directory of Open Access Journals (Sweden)

    Mărioara Drugă

    2010-05-01

    Full Text Available The study was carried out in an aluminium industry surrounding area on purpose to evaluate dietary aluminium intake level for rent animals originated from fodder and water consumed by them. There were taken feed and water samples in different periods and from increasing distances from industrial platform, determined the aluminium level by atomic spectroscopy and calculated the rations for cattle and poultry. Conclusions: aluminium dietary intake level by ration depends by forage period for studied species, rations structure and distance from industrial platform and didn’t reach toxic level in any case.

  12. The meaning of aluminium exposure on human health and aluminium-related diseases.

    Science.gov (United States)

    Crisponi, Guido; Fanni, Daniela; Gerosa, Clara; Nemolato, Sonia; Nurchi, Valeria M; Crespo-Alonso, Miriam; Lachowicz, Joanna I; Faa, Gavino

    2013-02-01

    The aim of this review is to attempt to answer extremely important questions related to aluminium-related diseases. Starting from an overview on the main sources of aluminium exposure in everyday life, the principal aspects of aluminium metabolism in humans have been taken into consideration in an attempt to enlighten the main metabolic pathways utilised by trivalent metal ions in different organs. The second part of this review is focused on the available evidence concerning the pathogenetic consequences of aluminium overload in human health, with particular attention to its putative role in bone and neurodegenerative human diseases.

  13. Shear Viscosity of Aluminium under Shock Compression

    Institute of Scientific and Technical Information of China (English)

    LIU Fu-Sheng; YANG Mei-Xia; LIU Qi-Wen; CHEN Jun-Xiang; JING Fu-Qian

    2005-01-01

    @@ Based on the Newtonian viscous fluid model and the analytic perturbation theory of Miller and Ahrens for the oscillatory damping of a sinusoidal shock front, a flyer-impact technique is developed to investigate the effecti veviscosity of shocked aluminium.

  14. Diazabutadienes as ligands.I. Compounds of aluminium: coordination of diazabutadienes to Al(CH3)3 and subsequent intramolecular insertion and rearrangement reactions leading to [(CH3)2Al(RNCH(CH3)C(R')=NR)] (R' = H, CH3) and (CH3)2AlRNCH2C(CH3) =NR

    NARCIS (Netherlands)

    Koten, G. van; Klerks, J.M.; Stufkens, D.J.; Vrieze, K.

    1979-01-01

    Reaction of R-N=CH-CH=N-R with [(CH{3}){3}Al]{2} affords the coordination product (CH{3}){3}AlRN=CH-CH=NR (A) for R = 2, 6-(CH{3}){2}C{6}H{3} and 2,4,6(CH{3}){3}C{6}H{2}. For R = 4 ClC{6}H{4}, 4-CH{3}C{6}H{4} and 4-CH{3}OC{6}H{4}, insertion takes place, giving the complexes (CH{3}){2}AlRN-CH(CH{3})-

  15. Electrical Conductivity of Aluminium Alloy Foams

    Institute of Scientific and Technical Information of China (English)

    凤仪; 郑海务; 朱震刚; 祖方遒

    2002-01-01

    Closed-cell aluminium alloy foams were produced using the powder metallurgical technique. The effect of porosityand cell diameter on the electrical conductivity of foams was investigated and the results were compared with anumber of models. It was found that the percolation theory can be successfully applied to describe the dependenceof the electrical conductivity of aluminium alloy foams on the relative density. The cell diameter has a negligibleeffect on the electrical conductivity of foams.

  16. DETERMINATION OF IMPURITY ELEMENTS IN ALUMINIUM

    Institute of Scientific and Technical Information of China (English)

    侯小琳; 张永保

    1994-01-01

    Twenty five impurity elements in aluminium applied as reactor material are determined.Titanium and nickel are determined with epithermal neutron activation analysis(NAA),magnesium and silicon by inductance coupling plasma emission spectra(ICP),other elements by thermal NAA.The fission coefficient of uranium is given by an experiment,the interferences of uranium to Ce,Nd,Mo,Zr,La,Sm are subtracted.The detection limits of these methods to all of impurity elements in aluminium are calculated.

  17. Bumblebee Pupae Contain High Levels of Aluminium

    OpenAIRE

    2015-01-01

    The causes of declines in bees and other pollinators remains an on-going debate. While recent attention has focussed upon pesticides, other environmental pollutants have largely been ignored. Aluminium is the most significant environmental contaminant of recent times and we speculated that it could be a factor in pollinator decline. Herein we have measured the content of aluminium in bumblebee pupae taken from naturally foraging colonies in the UK. Individual pupae were acid-digested in a mic...

  18. Bumblebee pupae contain high levels of aluminium

    OpenAIRE

    2015-01-01

    The causes of declines in bees and other pollinators remains an on-going debate. While recent attention has focussed upon pesticides, other environmental pollutants have largely been ignored. Aluminium is the most significant environmental contaminant of recent times and we speculated that it could be a factor in pollinator decline. Herein we have measured the content of aluminium in bumblebee pupae taken from naturally foraging colonies in the UK. Individual pupae were acid-digested in a mic...

  19. Analysis of aluminium content and iron homeostasis in nipple aspirate fluids from healthy women and breast cancer-affected patients.

    Science.gov (United States)

    Mannello, Ferdinando; Tonti, Gaetana A; Medda, Virginia; Simone, Patrizia; Darbre, Philippa D

    2011-04-01

    Aluminium is not a physiological component of the breast but has been measured recently in human breast tissues and breast cyst fluids at levels above those found in blood serum or milk. Since the presence of aluminium can lead to iron dyshomeostasis, levels of aluminium and iron-binding proteins (ferritin, transferrin) were measured in nipple aspirate fluid (NAF), a fluid present in the breast duct tree and mirroring the breast microenvironment. NAFs were collected noninvasively from healthy women (NoCancer; n = 16) and breast cancer-affected women (Cancer; n = 19), and compared with levels in serum (n = 15) and milk (n = 45) from healthy subjects. The mean level of aluminium, measured by ICP-mass spectrometry, was significantly higher in Cancer NAF (268.4 ± 28.1 μg l(-1) ; n = 19) than in NoCancer NAF (131.3 ± 9.6 μg l(-1) ; n = 16; P Cancer NAF (280.0 ± 32.3 μg l(-1) ) than in NoCancer NAF (55.5 ± 7.2 μg l(-1) ), and furthermore, a positive correlation was found between levels of aluminium and ferritin in the Cancer NAF (correlation coefficient R = 0.94, P breast cancer. The reasons for the high levels of aluminium in NAF remain unknown but possibilities include either exposure to aluminium-based antiperspirant salts in the adjacent underarm area and/or preferential accumulation of aluminium by breast tissues.

  20. A preliminary study of the dermal absorption of aluminium from antiperspirants using aluminium-26.

    Science.gov (United States)

    Flarend, R; Bin, T; Elmore, D; Hem, S L

    2001-02-01

    Aluminium chlorohydrate (ACH), the active ingredient in many antiperspirants, was labeled with the radioisotope 26Al. The labeled ACH was then fractionated into about 100 samples using gel filtration chromatography. Each fraction was analyzed for 26Al and total aluminium content. Aluminium-26 was only detected in the fractions that also contained aluminium, which verified that the ACH was uniformly labeled. 84 mg of the labeled ACH was then applied to a single underarm of two adult subjects with blood and urine samples being collected over 7 weeks. Tape-stripping and mild washings of the skin were also collected for the first 6 days. Results indicate that only 0.012% of the applied aluminium was absorbed through the skin. At this rate, about 4 microg of aluminium is absorbed from a single use of ACH on both underarms. This is about 2.5% of the aluminium typically absorbed by the gut from food over the same time period. Therefore, a one-time use of ACH applied to the skin is not a significant contribution to the body burden of aluminium.

  1. Determination of Aluminium Content in Aluminium Hydroxide Formulation by FT-NIR Transmittance Spectroscopy

    DEFF Research Database (Denmark)

    Lai, Xuxin; Zheng, Yiwu; Søndergaard, Ib;

    2007-01-01

    A method for determining the aluminium content of an aluminium hydroxide suspension using near infrared (NIR) transmittance spectroscopy has been developed. Inductively coupled plasma-atomic emission spectroscopy (ICP-AES) was used as reference method. The factors influencing the NIR analysis...

  2. Aluminium exclusion and aluminium tolerance in woody plants

    Directory of Open Access Journals (Sweden)

    Ivano eBrunner

    2013-06-01

    Full Text Available The aluminium (Al cation Al3+ is highly rhizotoxic and is a major stress factor to plants on acid soils, which cover large areas of tropical and boreal regions. Many woody plant species are native to acid soils and are well adapted to high Al3+ conditions. In tropical regions, both woody Al accumulator and non-Al accumulator plants occur, whereas in boreal regions woody plants are non-Al accumulators. The mechanisms of these adaptations can be divided into those that facilitate the exclusion of Al3+ from root cells (exclusion mechanisms and those that enable plants to tolerate Al3+ once it has entered the root and shoot symplast (internal tolerance mechanisms. The biochemical and molecular basis of these mechanisms have been intensively studied in several crop plants and the model plant Arabidopsis. In this review, we examine the current understanding of Al3+ exclusion and tolerance mechanisms from woody plants. In addition, we discuss the ecology of woody non-Al accumulator and Al accumulator plants, and present examples of Al3+ adaptations in woody plant populations. This paper complements previous reviews focusing on crop plants and provides insights into evolutionary processes operating in plant communities that are widespread on acid soils.

  3. Toxicity of dissolved and precipitated aluminium to marine diatoms.

    Science.gov (United States)

    Gillmore, Megan L; Golding, Lisa A; Angel, Brad M; Adams, Merrin S; Jolley, Dianne F

    2016-05-01

    Localised aluminium contamination can lead to high concentrations in coastal waters, which have the potential for adverse effects on aquatic organisms. This research investigated the toxicity of 72-h exposures of aluminium to three marine diatoms (Ceratoneis closterium (formerly Nitzschia closterium), Minutocellus polymorphus and Phaeodactylum tricornutum) by measuring population growth rate inhibition and cell membrane damage (SYTOX Green) as endpoints. Toxicity was correlated to the time-averaged concentrations of different aluminium size-fractions, operationally defined as aluminium exposure varied between diatom species. C. closterium was the most sensitive species (10% inhibition of growth rate (72-h IC10) of 80 (55-100)μg Al/L (95% confidence limits)) while M. polymorphus (540 (460-600)μg Al/L) and P. tricornutum (2100 (2000-2200)μg Al/L) were less sensitive (based on measured total aluminium). Dissolved aluminium was the primary contributor to toxicity in C. closterium, while a combination of dissolved and precipitated aluminium forms contributed to toxicity in M. polymorphus. In contrast, aluminium toxicity to the most tolerant diatom P. tricornutum was due predominantly to precipitated aluminium. Preliminary investigations revealed the sensitivity of C. closterium and M. polymorphus to aluminium was influenced by initial cell density with aluminium toxicity significantly (paluminium toxicity to diatoms do not involve compromising the plasma membrane. These results indicate that marine diatoms have a broad range in sensitivity to aluminium with toxic mechanisms related to both dissolved and precipitated aluminium.

  4. Aluminium toxicity in winter wheat

    Directory of Open Access Journals (Sweden)

    Szabó A.

    2015-01-01

    Full Text Available Aluminium is the most frequent metal of the earth crust; it occurs mainly as biologically inactive, insoluble deposit. Environmental problems, industrial contaminations and acid rains increase the soil acidity, leading to the mobilization of Al. Half of the world’s potential arable lands are acidic; therefore, Al-toxicity decreases crop productivity. Wheat is a staple food for 35% of the world population. The effects of Al-stress (0.1 mM were studied on winter wheat; seedlings were grown hydroponically, at acidic pH. After two weeks, the root weight was decreased; a significant difference was found in the P- and Ca-content. The shoot weight and element content changed slightly; Al-content in the root was one magnitude higher than in the shoot, while Al-translocation was limited. The root plasma membrane H+-ATPase has central role in the uptake processes; Al-stress increased the Mg2+-ATPase activity of the microsomal fraction.

  5. Investigation of the formability of aluminium alloys at elevated temperatures

    Science.gov (United States)

    Tisza, M.; Budai, D.; Kovács, P. Z.; Lukács, Zs

    2016-11-01

    Aluminium alloys are more and more widely applied in car body manufacturing. Increasing the formability of aluminium alloys are one of the most relevant tasks in todays’ research topics. In this paper, the focus will be on the investigation of the formability of aluminium alloys concerning those material grades that are more widely applied in the automotive industry including the 5xxx and 6xxx aluminium alloy series. Recently, besides the cold forming of aluminium sheets the forming of aluminium alloys at elevated temperatures became a hot research topic, too. In our experimental investigations, we mostly examined the EN AW 5754 and EN AW 6082 aluminium alloys at elevated temperatures. We analysed the effect of various material and process parameters (e.g. temperature, sheet thickness) on the formability of aluminium alloys with particular emphasis on the Forming Limit Diagrams at elevated temperatures in order to find the optimum forming conditions for these alloys.

  6. Structural colours and applications to anodised aluminium surfaces

    DEFF Research Database (Denmark)

    Johansen, Villads Egede

    This thesis investigates possible ways of creating aluminium with a milky white, metallic appearance for decorative purposes. Since white cannot be obtained through traditional absorption based dyeing of aluminium, optical mechanisms based on scattering by nanostructures are studied in order...

  7. Effect of aluminium phosphate as admixture on oxychloride cement

    Indian Academy of Sciences (India)

    M P S Chandrawat; R N Yadav

    2000-02-01

    The effect of admixing of aluminium phosphate on oxychloride cement in the matrix has been investigated. It is shown that aluminium phosphate retards the setting process of the cement and improves water-tightness.

  8. Steam Assisted Accelerated Growth of Oxide Layer on Aluminium Alloys

    OpenAIRE

    2013-01-01

    Corrosion resistance of aluminium alloys is related to the composition and morphology of the oxide film on the surface of aluminium. In this paper we investigated the use of steam on the surface modification of aluminium to produce boehmite films. The study reveals a detailed investigation of the effect of vapour pressure, structure of intermetallic particles and thickness of boehmite films on the corrosion behaviour of aluminium alloys.

  9. Aluminium allergy and granulomas induced by vaccinations for children

    DEFF Research Database (Denmark)

    Andersen, Rosa Marie O; Zachariae, Claus; Johansen, Jeanne Duus

    2014-01-01

    Vaccination with aluminium-adsorbed vaccines can induce aluminium allergy with persistent itching subcutaneous nodules at the injection site - vaccination granulomas. In this article we give an overview of childhood aluminium-adsorbed vaccines available in Denmark. Through literature studies we...... examine the incidence, the symptoms and the prognosis for the vaccination granulomas and the allergy. Finally we discuss the status in Denmark....

  10. Stability of aluminium beams in case of fire

    NARCIS (Netherlands)

    Meulen, O.R. van der; Soetens, F.; Maljaars, J.

    2014-01-01

    Fire is often the dominant design criterion for aluminium structures. Present design rules for aluminium constructions in fire neglect both the decrease in susceptibility to local buckling and the effects of creep, that are intrinsic to aluminium. They may therefore either overestimate or underestim

  11. [Aluminium allergy and granulomas induced by vaccinations for children].

    Science.gov (United States)

    Andersen, Rosa Marie Ø; Zachariae, Claus; Johansen, Jeanne Duus

    2015-04-27

    Vaccination with aluminium-adsorbed vaccines can induce aluminium allergy with persistent itching subcutaneous nodules at the injection site – vaccination granulomas. In this article we give an overview of childhood aluminium-adsorbed vaccines available in Denmark. Through literature studies we examine the incidence, the symptoms and the prognosis for the vaccination granulomas and the allergy. Finally we discuss the status in Denmark.

  12. Energy Absorption of Monolithic and Fibre Reinforced Aluminium Cylinders

    NARCIS (Netherlands)

    De Kanter, J.L.C.G.

    2006-01-01

    Summary accompanying the thesis: Energy Absorption of Monolithic and Fibre Reinforced Aluminium Cylinders by Jens de Kanter This thesis presents the investigation of the crush behaviour of both monolithic aluminium cylinders and externally fibre reinforced aluminium cylinders. The research is based

  13. Aluminium hydroxide-induced granulomas in pigs

    DEFF Research Database (Denmark)

    Valtulini, S; Macchi, C; Ballanti, P

    2005-01-01

    The effect of intramuscular injection of 40 mg/2 ml aluminium hydroxide in the neck of pigs was examined in a number of ways. The investigation followed repeated slaughterhouse reports, according to which 64.8% of pigs from one particular farm were found at slaughter to have one or more nodules...... in the muscles of the neck (group slaughtered). The pigs had been injected with a vaccine containing 40 mg/2 ml dose of aluminium hydroxide as adjuvant. Research consisted of two phases: first, an epidemiological study was carried out, aimed at determining the risk factors for the granulomas. The results...... and adjuvant) to pigs inoculated twice with apyrogenic bi-distilled water (group water) and to pigs inoculated once with the adjuvant and once with apyrogenic bi-distilled water (group adjuvant/water). Both studies agreed in their conclusions, which indicate that the high amount of aluminium hydroxide...

  14. The binding of phosphonic acids at aluminium oxide surfaces and correlation with passivation of aluminium flake.

    Science.gov (United States)

    Cooper, Rachel J; Camp, Philip J; Henderson, David K; Lovatt, Paul A; Nation, David A; Richards, Stuart; Tasker, Peter A

    2007-04-07

    Measurements of adsorption isotherms of a series of thirteen mono- and di-phosphonic acids have shown that these bind strongly to the surface of high surface area aluminium trihydroxide. The incorporation of such phosphonates into a suspension of aluminium flake in an aqueous medium, modelling the continuous phase of a water-based paint, greatly suppresses the evolution of hydrogen. Whilst strong binding of the phosphonate to aluminium oxides is an essential criterion for good passivation, other factors such as the hydrophobicity of the ligand are also important in suppressing hydrogen-evolution.

  15. Diamond grooving of rapidly solidified optical aluminium

    Science.gov (United States)

    Abou-El-Hossein, Khaled; Hsu, Wei-Yao; Ghobashy, Sameh; Cheng, Yuan-Chieh; Mkoko, Zwelinzima

    2015-10-01

    Traditional optical aluminium grades such as Al 6061 are intensively used for making optical components for applications ranging from mould insert fabrication to laser machine making. However, because of their irregular microstructure and relative inhomogeneity of material properties at micro scale, traditional optical aluminium may exhibit some difficulties when ultra-high precision diamond turned. Inhomogeneity and micro-variation in the material properties combined with uneven and coarse microstructure may cause unacceptable surface finish and accelerated tool wear, especially in grooving operation when the diamond tool edge is fully immersed in the material surface. Recently, new grades of optical aluminium that are featured by their ultra-fine microstructure and improved material properties have been developed to overcome the problem of high tool wear rates. The new aluminium grades have been developed using rapid solidification process which results in extremely small grain sizes combined with improved mechanical properties. The current study is concerned with investigating the performance of single-point diamond turning when grooving two grades of rapidly solidified aluminium (RSA) grades: RSA905 which is a high-alloyed aluminium grade and RSA443 which has a high silicon content. In this study, two series of experiments employed to create radial microgrooves on the two RSA grades. The surface roughness obtained on the groove surface is measured when different combinations of cutting parameters are used. Cutting speed is varied while feed rate and depth of cut were kept constant. The results show that groove surface roughness produced on RSA443 is higher than that obtained on RSA905. Also, the paper reports on the effect of cutting speed on surface roughness for each RSA grade.

  16. New aluminium alloys with high lithium content

    Energy Technology Data Exchange (ETDEWEB)

    Schemme, K.; Velten, B.

    1989-06-01

    Since the early 80's there have been made great efforts to replace the high strength aluminium alloys for the aircraft and space industry by a new generation of aluminium-lithium alloys. The attractivity of this kind of alloys could be increased by a further reduction of their density, caused by an increasing lithium content (/ge/ 5 wt.% Li). Therefore binary high-lithium containing alloys with low density are produced and metallografically investigated. A survey of their strength and wear behavior is given by using tensile tests and pin abrasing tests. (orig.).

  17. China’s Production and Market of Aluminium Extruded Profiles

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>Chinese aluminium extrusion industry came into existence at the early 1950s with most products used in military industry and national defence.At the beginning of 1980s,the produc- tion of construction aluminium profiles started simultaneously in North and South China.In the following thirty years,the aluminium extru- sion industry entered into a quickly developing stage with a focus on construction aluminium profiles.With the blooming real estate industry, the demand for construction aluminium profiles from the domestic market has a tendency of yearly increase.From 2000,the quick devel- opments of China’s auto and railway vehicle

  18. Challenges in LCA modelling of multiple loops for aluminium cans

    DEFF Research Database (Denmark)

    Niero, Monia; Olsen, Stig Irving

    packaging scrap sources (i.e. used beverage can and mixed aluminium packaging) to understand the limiting factors for multiple loop aluminium can recycling. Secondly, we performed a comparative LCA of aluminium can production and recycling in multiple loops considering the two aluminium packaging scrap...... this information to perform an LCA of 30 recycling loops based on the actual alloy composition. From the comparative LCA the closed product loop option (i.e. using used beverage can scraps) turned out to have lower environmental impact than the open loop option (i.e. using mixed aluminium packaging scraps...

  19. Aluminium: a natural adjuvant in Leishmania transmission via sand flies?

    Science.gov (United States)

    Maingon, Rhayza; Khela, Amandeep; Sampson, Christopher; Ward, Richard; Walker, Karen; Exley, Christopher

    2008-11-01

    Genetically identical Leishmania chagasi/infantum parasites cause both atypical cutaneous leishmaniasis and visceral leishmaniasis. In this report we have tested the first part of a hypothesis that states that the form of this disease that is manifested depends upon the adjuvant-like activity of aluminium of dietary origin accumulated in the salivary gland of the sand fly vector. In sand flies fed aluminium-supplemented sucrose we have used histochemistry to qualitatively identify aluminium in their salivary glands and graphite furnace atomic absorption spectrometry to quantify the aluminium content of dissected salivary glands. Aluminium may be acting as a natural adjuvant in some forms of leishmaniasis.

  20. Irradiation damage in aluminium single crystals produced by 50-keV aluminium and copper ions

    DEFF Research Database (Denmark)

    Henriksen, L.; Johansen, A.; Koch, J.;

    1968-01-01

    Aluminium single crystals, thin enough to be examined by electron microscopy, have been irradiated with 50-keV aluminium and copper ions. The irradiation fluxes were in the range 1011–1014 cm−2 s−1 and the doses were from 6 × 1012 to 6 × 1014 cm−2. Irradiation along either a or a direction produc...

  1. Flexural buckling of fire exposed aluminium columns

    NARCIS (Netherlands)

    Maljaars, J.; Twilt, L.; Soetens, F.

    2009-01-01

    In order to study buckling of fire exposed aluminium columns, a finite element model is developed. The results of this model are verified with experiments. Based on a parametric study with the finite element model, it is concluded that the simple calculation model for flexural buckling of fire expos

  2. Aluminium building and civil engineering structures

    NARCIS (Netherlands)

    Soetens, F.; Mennink, J.

    1999-01-01

    The design of aluminium structures in building and civil engineering applications is different from designing in traditional materials. This difference is based on the physical and mechanical properties of the material and the freedom of cross-sectional shape provided by the extrusion manufacturing

  3. Dissolved aluminium in the Southern Ocean

    NARCIS (Netherlands)

    Middag, R.; van Slooten, C.; de Baar, H. J. W.; Laan, P.

    2011-01-01

    Dissolved aluminium (Al) occurs in a wide range of concentrations in the world oceans. The concentrations of Al in the Southern Ocean are among the lowest ever observed. An all-titanium CTD sampling system makes it possible to study complete deep ocean sections of Al and other trace elements with th

  4. Aluminium overhead highway traffic sign structures

    NARCIS (Netherlands)

    Courage, W.M.G.; Soetens, F.; Noordzij, R.; Drabbels, J.

    1998-01-01

    This paper deals with the design and manufacturing of aluminium overhead sign structures. These gantries are built up by using two X-shaped column frames connected by a triangular space frame girder. Slenderness and a low solidity ratio were objectives in the architectonic design. Braces and main ch

  5. Steam generated conversion coating on aluminium alloys

    DEFF Research Database (Denmark)

    Din, Rameez Ud; Jellesen, Morten Stendahl; Ambat, Rajan

    pressure steam produced by an autoclave at a temperature of 107 – 121 °C and pressure of 15 -17 psi for 10 minutes to produce a thin coating of aluminium oxide. The aim of this study is to understand the effect of high pressure steam with and without different chemical additives on surface morphology...

  6. Molecular breeding of cereals for aluminium resistance

    Science.gov (United States)

    Aluminium (Al3+) toxicity is the primary factor limiting crop production on acidic soils worldwide. In addition to an application of lime for soil amelioration, Al3+ resistant plant varieties have been deployed to raise productivity on such hostile soils. This has been possible due to the exploita...

  7. Indentation of aluminium foam at low velocity

    Directory of Open Access Journals (Sweden)

    Shi Xiaopeng

    2015-01-01

    Full Text Available The indentation behaviour of aluminium foams at low velocity (10 m/s ∼ 30 m/s was investigated both in experiments and numerical simulation in this paper. A flat-ended indenter was used and the force-displacement history was recorded. The Split Hopkinson Pressure bar was used to obtain the indentation velocity and forces in the dynamic experiments. Because of the low strength of the aluminium foam, PMMA bar was used, and the experimental data were corrected using Bacon's method. The energy absorption characteristics varying with impact velocity were then obtained. It was found that the energy absorption ability of aluminium foam gradually increases in the quasi-static regime and shows a significant increase at ∼10 m/s velocity. Numerical simulation was also conducted to investigate this process. A 3D Voronoi model was used and models with different relative densities were investigated as well as those with different failure strain. The indentation energy increases with both the relative density and failure strain. The analysis of the FE model implies that the significant change in energy absorption ability of aluminium foam in indentation at ∼10 m/s velocity may be caused by plastic wave effect.

  8. Aluminium in brain tissue in familial Alzheimer's disease.

    Science.gov (United States)

    Mirza, Ambreen; King, Andrew; Troakes, Claire; Exley, Christopher

    2017-03-01

    The genetic predispositions which describe a diagnosis of familial Alzheimer's disease can be considered as cornerstones of the amyloid cascade hypothesis. Essentially they place the expression and metabolism of the amyloid precursor protein as the main tenet of disease aetiology. However, we do not know the cause of Alzheimer's disease and environmental factors may yet be shown to contribute towards its onset and progression. One such environmental factor is human exposure to aluminium and aluminium has been shown to be present in brain tissue in sporadic Alzheimer's disease. We have made the first ever measurements of aluminium in brain tissue from 12 donors diagnosed with familial Alzheimer's disease. The concentrations of aluminium were extremely high, for example, there were values in excess of 10μg/g tissue dry wt. in 5 of the 12 individuals. Overall, the concentrations were higher than all previous measurements of brain aluminium except cases of known aluminium-induced encephalopathy. We have supported our quantitative analyses using a novel method of aluminium-selective fluorescence microscopy to visualise aluminium in all lobes of every brain investigated. The unique quantitative data and the stunning images of aluminium in familial Alzheimer's disease brain tissue raise the spectre of aluminium's role in this devastating disease.

  9. Microemulsion extraction separation and determination of aluminium species by spectrofluorimetry.

    Science.gov (United States)

    Lu, Jusheng; Tian, Jiuying; Guo, Na; Wang, Yan; Pan, Yichun

    2011-01-30

    A simple and sensitive microemulsion extraction separation method was developed for the speciation of aluminium in tea samples by spectrofluorimetry. With 8-hydroxyquinoline (8-HQ) as the chelating agent and Triton X-100 Winsor II microemulsion as the extractant, separation of aluminium species in different pH solutions was achieved by microemulsion extraction. The formation of microemulsion, the conditions of extraction and determination of aluminium species were studied. The results showed that, the contents of aluminium species in tea leaves and infusions samples, such as total aluminium, total soluble aluminium, total granular aluminium, inorganic aluminium except Al-F, and (Al-F+Al-org), were obtained successfully under the optimal conditions. The limit of detection was 0.23 μg L(-1) in pH 9.5 solution, and 0.59 μg L(-1) in pH 6.0 solution respectively; the precision (RSD) for 11 replicate measurements of 10 μg L(-1) aluminium was 2.1% in pH 9.5 solution, and 2.8% in pH 6.0 solution respectively; the recoveries for the spiked samples were 96.8-103.5%. The proposed method is simple and efficient, which has been applied to the speciation of aluminium in tea samples with satisfactory results.

  10. 32 CFR 32.32 - Real property.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Real property. 32.32 Section 32.32 National Defense Department of Defense OFFICE OF THE SECRETARY OF DEFENSE DoD GRANT AND AGREEMENT REGULATIONS ADMINISTRATIVE REQUIREMENTS FOR GRANTS AND AGREEMENTS WITH INSTITUTIONS OF HIGHER EDUCATION, HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS...

  11. Feet sunk in molten aluminium: The burn and its prevention.

    Science.gov (United States)

    Alonso-Peña, David; Arnáiz-García, María Elena; Valero-Gasalla, Javier Luis; Arnáiz-García, Ana María; Campillo-Campaña, Ramón; Alonso-Peña, Javier; González-Santos, Jose María; Fernández-Díaz, Alaska Leonor; Arnáiz, Javier

    2015-08-01

    Nowadays, despite improvements in safety rules and inspections in the metal industry, foundry workers are not free from burn accidents. Injuries caused by molten metals include burns secondary to molten iron, aluminium, zinc, copper, brass, bronze, manganese, lead and steel. Molten aluminium is one of the most common causative agents of burns (60%); however, only a few publications exist concerning injuries from molten aluminium. The main mechanisms of lesion from molten aluminium include direct contact of the molten metal with the skin or through safety apparel, or when the metal splash burns through the pants and rolls downward along the leg. Herein, we report three cases of deep dermal burns after 'soaking' the foot in liquid aluminium and its evolutive features. This paper aims to show our experience in the management of burns due to molten aluminium. We describe the current management principles and the key features of injury prevention.

  12. What is the risk of aluminium as a neurotoxin?

    Science.gov (United States)

    Exley, Christopher

    2014-06-01

    Aluminium is neurotoxic. Its free ion, Al(3+) (aq), is highly biologically reactive and uniquely equipped to do damage to essential cellular (neuronal) biochemistry. This unequivocal fact must be the starting point in examining the risk posed by aluminium as a neurotoxin in humans. Aluminium is present in the human brain and it accumulates with age. The most recent research demonstrates that a significant proportion of individuals older than 70 years of age have a potentially pathological accumulation of aluminium somewhere in their brain. What are the symptoms of chronic aluminium intoxication in humans? What if neurodegenerative diseases such as Alzheimer's disease are the manifestation of the risk of aluminium as a neurotoxin? How might such an (outrageous) hypothesis be tested?

  13. Photoluminescence from Nd Doped Anodic Aluminium Oxide

    Institute of Scientific and Technical Information of China (English)

    ZHOU Zhang-Kai; PENG Xiao-Niu; SU Xiong-Rui; HAO Zhong-Hua

    2009-01-01

    We prepare Nd doped anodic aluminium oxide (Nd:AAO) template by using Nd doped aluminium foils through two-step anodization processes. Photoluminescence (PL) from the Nd:AAO template with the annealing temper-ature higher than 400℃ is observed, and the PL intensity enhanced with the increasing annealing temperature is found. We investigate the crystallization of Nd:AAO template and the excitation wavelength dependence of PL intensity, showing that the PL results from the Nd doped in the template. The approach presented may probably facilitate the fabricating of AAO with good light-emitting property, which can be used in fabrication of multifunctional nanosized films and may find applications in photonic devices.

  14. Nanoporous Aluminium Oxide Membranes as Cell Interfaces

    Directory of Open Access Journals (Sweden)

    Dorothea Brüggemann

    2013-01-01

    Full Text Available Nanoporous anodic aluminium oxide (AAO has become increasingly important in biomedical applications over the past years due to its biocompatibility, increased surface area, and the possibility to tailor this nanomaterial with a wide range of surface modifications. AAO nanopores are formed in an inexpensive anodisation process of pure aluminium, which results in the self-assembly of highly ordered, vertical nanochannels with well-controllable pore diameters, depths, and interpore distances. Because of these outstanding properties AAO nanopores have become excellent candidates as nanostructured substrates for cell-interface studies. In this comprehensive review previous surveys on cell adhesion and proliferation on different AAO nanopore geometries and surface modifications are highlighted and summarised tabularly. Future applications of nanoporous alumina membranes in biotechnology and medicine are also outlined, for instance, the use of nanoporous AAO as implant modifications, coculture substrates, or immunoisolation devices.

  15. The Friction of Saline Ice on Aluminium

    Directory of Open Access Journals (Sweden)

    Christopher Wallen-Russell

    2016-01-01

    Full Text Available The friction of ice on other materials controls loading on offshore structures and vessels in the Arctic. However, ice friction is complicated, because ice in nature exists near to its melting point. Frictional heating can cause local softening and perhaps melting and lubrication, thus affecting the friction and creating a feedback loop. Ice friction is therefore likely to depend on sliding speed and sliding history, as well as bulk temperature. The roughness of the sliding materials may also affect the friction. Here we present results of a series of laboratory experiments, sliding saline ice on aluminium, and controlling for roughness and temperature. We find that the friction of saline ice on aluminium μice-al=0.1 typically, but that this value varies with sliding conditions. We propose physical models which explain the variations in sliding friction.

  16. Multiply-negatively charged aluminium clusters and fullerenes

    Energy Technology Data Exchange (ETDEWEB)

    Walsh, Noelle

    2008-07-15

    Multiply negatively charged aluminium clusters and fullerenes were generated in a Penning trap using the 'electron-bath' technique. Aluminium monoanions were generated using a laser vaporisation source. After this, two-, three- and four-times negatively charged aluminium clusters were generated for the first time. This research marks the first observation of tetra-anionic metal clusters in the gas phase. Additionally, doubly-negatively charged fullerenes were generated. The smallest fullerene dianion observed contained 70 atoms. (orig.)

  17. Improvement of photodynamic activity of aluminium sulphophthalocyanine due to biotinylation

    Science.gov (United States)

    Meerovich, Irina G.; Jerdeva, Victoria V.; Derkacheva, Valentina M.; Meerovich, Gennadii A.; Lukyanets, Eugeny A.; Kogan, Eugenia A.; Savitsky, Alexander P.

    2003-09-01

    The photodynamic activity of dibiotinylated aluminium sulphophthalocyanine in vitro and in vivo were studied. It was obtained that in vitro dibiotinylated aluminium sulphophthalocyanine provides the effective damage of small cell lung carcinoma OAT-75. In vivo dibiotinylated aluminium sulphophthalocyanine causes destruction of tumor (Erlich carcinoma), results in total necrosis of tumor tissue and expresses vascular damage (trombosis and destruction of vascular walls) even in concentration 0.25 mg/kg of a body weight.

  18. Usage of Neural Network to Predict Aluminium Oxide Layer Thickness

    OpenAIRE

    2015-01-01

    This paper shows an influence of chemical composition of used electrolyte, such as amount of sulphuric acid in electrolyte, amount of aluminium cations in electrolyte and amount of oxalic acid in electrolyte, and operating parameters of process of anodic oxidation of aluminium such as the temperature of electrolyte, anodizing time, and voltage applied during anodizing process. The paper shows the influence of those parameters on the resulting thickness of aluminium oxide layer. The impact of...

  19. Corrosion of Metal-Matrix Composites with Aluminium Alloy Substrate

    Directory of Open Access Journals (Sweden)

    B. Bobic

    2010-03-01

    Full Text Available The corrosion behaviour of MMCs with aluminium alloy matrix was presented. The corrosion characteristics of boron-, graphite-, silicon carbide-, alumina- and mica- reinforced aluminium MMCs were reviewed. The reinforcing phase influence on MMCs corrosion rate as well as on various corrosion forms (galvanic, pitting, stress corrosion cracking, corrosion fatique, tribocorrosion was discussed. Some corrosion protection methods of aluminium based MMCs were described

  20. Un-optimistic Prospects for the Westward Movement of Aluminium

    Institute of Scientific and Technical Information of China (English)

    2014-01-01

    <正>The westward movement of aluminium is essential for the industrial development.Up till now,the northwestern area has planned to construct more than 40 aluminium projects with a total production capacity of over 20 million tons.The future rate of progress of newly constructed projects are directly related to the supplies of the aluminium market,having critical guiding meaning for the trends of

  1. Wearing tests on aluminium coated with diamond by triboadhesion

    Institute of Scientific and Technical Information of China (English)

    J.M.RodríguezLelis; B.D.Angulo; J.O.Colín; J.PorcayoCalderón

    2001-01-01

    In this work the results obtained from subjecting aluminium coated with diamond by tri-boadhesion to a wearing process with a plane rider. Here it is shown the ratio of the normal toshearing forces, called friction factor, as an indication of the resistance of the surface. It was foundthat the film of the aluminium coated with diamond resisted three times compared with the oxida-tion film of commercial aluminium, which for the purpose of this work was considered withoutcoating.

  2. Friction factor of CP aluminium and aluminium–zinc alloys

    Indian Academy of Sciences (India)

    N Vidhya Sagar; K S Anand; A C Mithun; K Srinivasan

    2006-12-01

    Friction factor has been determined for CP aluminium and aluminium–zinc alloys using ring compression test at different temperatures from 303 K to 773 K. It is found that CP aluminium exhibits sticking whereas Al–Zn alloys do not exhibit sticking at elevated temperatures. Hot working of Al–Zn alloy is easier than that of CP aluminium at 773 K. As zinc content increases up to 10 wt% the friction factor decreases up to 0.02.

  3. Telangiectasia in aluminium workers: a follow up.

    OpenAIRE

    Thériault, G.; Gingras, S.; Provencher, S

    1984-01-01

    A five step investigation was carried out to gain a better understanding of the morbidity that accompanied the development of telangiectasia on aluminium workers and to find its cause. Fifty workers with multiple telangiectasia when matched with normal controls showed the same amount of illness except that evidence of ischaemia on the ECG was found in nine cases and one control. The cases did not show an excess of abnormal biochemical tests. The basic histopathological lesion affected the sur...

  4. Welding distortion of aluminium structural members

    Energy Technology Data Exchange (ETDEWEB)

    Goglio, L. [Politecnico di Torino (Italy). Dept. of Mech.; Gugliotta, A. [Politecnico di Torino (Italy). Dept. of Mech.; Pasquino, D. [Politecnico di Torino (Italy). Dept. of Mech.

    1996-12-31

    The paper deals with the angular distortion induced in aluminium tubular beams during welding to prepare T junctions. The research, based on experimental measurements, makes use of statistical methods to identify the parameters (beam section, weld length, welding direction, etc.) that influence the angular change. The results are discussed also considering a model known from the literature. It is found that the distortion is generally low and can be minimized by a proper welding process. (orig.)

  5. China will Reduce Aluminium Export in 2005

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    <正>Starting from January 1, 2005, China eliminated the 8 per cent export tax rebate for aluminium, and further more, the exporters will have to pay 5 per cent export tax. This is beyond the expectations of the producers, for most of them thought only the 8 per cent export tax rebate would be eliminated and it was still too early to add the export tax.

  6. Thermal formation of corundum from aluminium hydroxides prepared from various aluminium salts

    Indian Academy of Sciences (India)

    J Temuujin; Ts JADAMBAA; K J D Mackenzie; P Angerer; F Porte; F Riley

    2000-08-01

    Aluminium hydroxides have been precipitated from various aluminium salts and the differences in their thermal behaviour have been investigated. Pseudoboehmite derived from the nitrate, sulfate and chloride all form -Al2O3 at ∼ 400°C but the formation of -Al2O3 at 1200°C occurs more readily in the material derived from the sulfate. This contains a higher concentration of anionic impurities related to differences in the solubility of the original aluminium salts. The sulfate is retained in the gel to higher temperatures at which its eventual decomposition may lead to the formation of a reactive pore structure which facilitates the nucleation of -Al2O3.

  7. Structural engineering of nanoporous anodic aluminium oxide by pulse anodization of aluminium.

    Science.gov (United States)

    Lee, Woo; Schwirn, Kathrin; Steinhart, Martin; Pippel, Eckhard; Scholz, Roland; Gösele, Ulrich

    2008-04-01

    Nanoporous anodic aluminium oxide has traditionally been made in one of two ways: mild anodization or hard anodization. The first method produces self-ordered pore structures, but it is slow and only works for a narrow range of processing conditions; the second method, which is widely used in the aluminium industry, is faster, but it produces films with disordered pore structures. Here we report a novel approach termed "pulse anodization" that combines the advantages of the mild and hard anodization processes. By designing the pulse sequences it is possible to control both the composition and pore structure of the anodic aluminium oxide films while maintaining high throughput. We use pulse anodization to delaminate a single as-prepared anodic film into a stack of well-defined nanoporous alumina membrane sheets, and also to fabricate novel three-dimensional nanostructures.

  8. Synthesis of aluminium nanoparticles by arc evaporation of an aluminium cathode surface

    Indian Academy of Sciences (India)

    M Gazanfari; M Karimzadeh; S Ghorbani; M R Sadeghi; G Azizi; H Karimi; N Fattahi; Z Karimzadeh

    2014-06-01

    Aluminium nanoparticles (Al Nps) are synthesized using arc discharge method by applying direct current between aluminium electrodes in liquid environment without any use of vacuum equipment, heat exchangers, high temperatures furnaces and inert gases. After synthesis of Al Nps, in situ coating process on the nanoparticles was performed immediately. The effects of media on the yield and morphology of aluminium nanoparticles were investigated. Analysis result of the samples indicated that particle size was less than 30 nm, when 120 A/cm2 arc current was used. In addition, coating agent can affect arc velocity, arc stability, morphology and composition of the nanoparticles. Resultant nanoparticles were identified using X-ray powder diffraction (XRD), also their surface morphology was studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) and finally the accuracy of coating was assessed with infrared (IR) spectroscopy.

  9. Friction stir welding (FSW of aluminium foam sandwich panels

    Directory of Open Access Journals (Sweden)

    M. Bušić

    2016-07-01

    Full Text Available The article focuses on the influence of welding speed and tool tilt angle upon the mechanical properties at the friction stir welding of aluminium foam sandwich panels. Double side welding was used for producing butt welds of aluminium sandwich panels applying insertion of extruded aluminium profile. Such insertion provided lower pressure of the tool upon the aluminium panels, providing also sufficient volume of the material required for the weldment formation. Ultimate tensile strength and flexural strength for three-point bending test have been determined for samples taken from the welded joints. Results have confirmed anticipated effects of independent variables.

  10. A Reaction Coating on Aluminium Alloys by Laser Processing

    OpenAIRE

    1993-01-01

    An aluminium oxide layer of 100 µm in thickness has been successfully coated on aluminium alloy 6061 and pure aluminium using a powder mixture of silicon oxide and aluminium by laser processing. A strong Al/Al2O3 interface was formed. The exothermic chemical reaction between SiO2 and Al may promote the metal/oxide wetting and the formation of Al2O3 layer. This new approach of ceramic coating on metals using a chemical reaction of other ceramics with metals may be applied to other systems.

  11. A new synthesis process for aluminium nitride. Nouveau procede de synthese du nitrure d'aluminium

    Energy Technology Data Exchange (ETDEWEB)

    Haussonne, J.M. (CNET, Centre Lannion B, 22 (France)); Lostec, J. (CNET, Centre Lannion B, 22 (France)); Bertot, J.P. (CNET, Centre Lannion B, 22 (France)); Lostec, L. (CNET, Centre Lannion B, 22 (France)); Sadou, S. (CNET, Centre Lannion B, 22 (France))

    1993-04-01

    Thermodynamic considerations show that, even at room temperature, pure aluminium can react with nitrogen to form the aluminium nitride AlN. However, pure aluminium does not exist: it is always surrounded by an alumina shell that protects the metal from further reactions. Furthermore, in the hypothesis where one has been able to make aluminium react with nitrogen, an aluminium nitride shell will protect as well the metal core from further oxidation. Prompted by the Lanxide process allowing to form Al/Al[sub 2]O[sub 3] composites, we have mixed aluminium powders with lithium salts, and easily synthesized pure aluminium nitride by heating the mixed powders in nitrigen at temperatures ranging from 800 to 1200 C. Starting from aluminium powders with a specific area ranging from 0.3 to 4 m[sup 2]/g, we have been able to produce aluminium nitride with specific are ranging from 1 to 20 m[sup 2]/g. Mixed with Y[sub 2]O[sub 3]-CaO and sintered at 1720 C in N[sub 2], we obtained AlN ceramics owning 92% density and 160 W/m.K thermal conductivity. (orig.).

  12. There is (still too much aluminium in infant formulas

    Directory of Open Access Journals (Sweden)

    Burrell Shelle-Ann M

    2010-08-01

    Full Text Available Abstract Background Infant formulas are sophisticated milk-based feeds for infants which are used as a substitute for breast milk. Historically they are known to be contaminated by aluminium and in the past this has raised health concerns for exposed infants. We have measured the aluminium content of a number of widely used infant formulas to determine if their contamination by aluminium and consequent issues of child health persists. Methods Samples of ready-made milks and powders used to make milks were prepared by microwave digestion of acid/peroxide mixtures and their aluminium content determined by THGA. Results The concentration of aluminium in ready-made milks varied from ca 176 to 700 μg/L. The latter concentration was for a milk for preterm infants. The aluminium content of powders used to make milks varied from ca 2.4 to 4.3 μg/g. The latter content was for a soya-based formula and equated to a ready-to-drink milk concentration of 629 μg/L. Using the manufacturer's own guidelines of formula consumption the average daily ingestion of aluminium from infant formulas for a child of 6 months varied from ca 200 to 600 μg of aluminium. Generally ingestion was higher from powdered as compared to ready-made formulas. Conclusions The aluminium content of a range of well known brands of infant formulas remains high and particularly so for a product designed for preterm infants and a soya-based product designed for infants with cow's milk intolerances and allergies. Recent research demonstrating the vulnerability of infants to early exposure to aluminium serves to highlight an urgent need to reduce the aluminium content of infant formulas to as low a level as is practically possible.

  13. Electrolytic deposition of aluminium-magnesium-alloys from electrolytes containing organo-aluminium complexes; Elektrolytische Abscheidung von Aluminium-Magnesium-Legierungen aus aluminiumorganischen Komplexelektrolyten

    Energy Technology Data Exchange (ETDEWEB)

    Lehmkuhl, H.; Mehler, K.; Bongard, H.; Tesche, B. [Max-Planck-Institut fuer Kohlenforschung, Muelheim an der Ruhr (Germany); Reinhold, B. [Audi AG, Ingolstadt (Germany). Technische Entwicklung

    2000-10-01

    The galvanic deposition of pure aluminium from fluoride-containing electrolytes has been developed further and for the first time aluminium and magnesium have been deposited from a toluene-solution of a halide-free organo-aluminium complex electrolyte. The rate of incorporation of magnesium can be controlled over a wide range by either adjusting the composition of the aluminium-magnesium anode or by using separate aluminium or magnesium anodic circuits. The current efficiency for both anode and cathode approaches 100%. The resulting coating is optically attractive and, depending upon the magnesium-content or the cathodic current density, can be formed as a dull or polished surface. Investigations using an electron microscope show that the surface, in contrast to that of pure aluminium, consists of spherical particles. The aluminium-magnesium coating provides excellent protection against the corrosion of magnesium components. Electrochemical investigations using, for example 25% by weight magnesium incorporation, indicate a pronounced passivity interval compared to the alloy AZ91hp. In contrast to galvanic zinc-plated and silicate-sealed examples, cyclic corrosion tests on screws simulating 10 years of exposure, show no corrosion. (orig.)

  14. Speciation analysis of aluminium and aluminium fluoride complexes by HPIC-UVVIS.

    Science.gov (United States)

    Frankowski, Marcin; Zioła-Frankowska, Anetta

    2010-10-15

    The study presents a new analytical method for speciation analysis in fractionation of aluminium fluoride complexes and free Al(3+) in soil samples. Aluminium speciation was studied in model solutions and soil extract samples by means of high performance ion chromatography (HPIC) with UV-VIS detection using post-column reaction with tiron for the separation and detection of aluminium fluoride complex and Al(3+) forms during one analysis. The paper presents particular stages of the chromatographic process optimization involving selecting the appropriate eluent strength, type of elution or concentration and quantity of derivatization reagent. HPIC was performed on a bifunctional analytical column Dionex IonPac CS5A. The use of gradient elution and the eluents A: 1M NH(4)Cl and B: water acidified to pH of eluent phase, enabled full separation of fluoride aluminium forms as AlF(2)(+), AlF(3)(0), AlF(4)(-) (first signal), AlF(2+) (second signal) and form Al(3+) in a single analytical procedure. The proposed new method HPIC-UVVIS was applied successfully in the quantitative and qualitative analysis of soil samples.

  15. Aluminium and iron air pollution near an iron casting and aluminium foundry in Turin district (Italy).

    Science.gov (United States)

    Polizzi, Salvatore; Ferrara, Mauro; Bugiani, Massimiliano; Barbero, Domenico; Baccolo, Tiziana

    2007-09-01

    This work reports the results of an environmental survey carried out in an industrial area in the Province of Turin: its main aim is to assess the levels of iron and aluminium in the outside air during the period from July to September to assess the influence of industrial activity (a cast-iron and aluminium foundry) which is interrupted during the month of August, on the level of metals present in the air. Conducting the analysis during this period of time made it possible to avoid the confounding effect of pollution due to domestic central heating. The measurements were taken from nine areas at different distances from the foundry in the area and according to the direction of the prevailing winds, as deduced from the historical data. The results of this survey show a statistically significant difference in iron and aluminium levels in the outside air in the geographic areas between the two main periods examined: during August (no foundry activity) v/s July-September (foundry activity). The values recorded are: Aluminium 0.4+/-0.45 microg/m(3) v/s 1.12+/-1.29 microg/m(3) (pIron 0.95+/-0.56 microg/m(3) v/s 1.6+/-1.0 microg/m(3) (piron tended to be higher in the areas farther away from the foundry site in the areas located along the path of the prevailing winds.

  16. Tailored Aluminium based Coatings for Optical Appearance and Corrosion Resistance

    DEFF Research Database (Denmark)

    Aggerbeck, Martin

    of these applications, but the use of recycled aluminium compromises this due to the presence of increased levels of impurity and alloying elements. Knowledge on how different alloying elements affect the optical appearance might therefore increase the applicability of recycled aluminium. It was investigated how...

  17. Enhanced corrosion protection by microstructural control of aluminium brazing sheet

    NARCIS (Netherlands)

    Norouzi Afshar, F.

    2013-01-01

    Aluminium brazing sheet is a sandwich material made out of two aluminium alloys (AA4xxx/AA3xxx) and is widely used in automotive heat exchangers. One of the main performance criteria for heat exchanger units is the lifetime of the product. The lifetime of the heat exchanger units is determined by th

  18. CAD implementation of design rules for aluminium extrusion dies

    NARCIS (Netherlands)

    Ouwerkerk, van Gijs

    2009-01-01

    Aluminium extrusion is an industrial forming process that is used to produce long profiles of a constant cross-section. This cross-section is shaped by the opening in a steel tool known as the die. The understanding of the mechanics of the aluminium extrusion process is still limited. The flow of al

  19. New Policies to Control the Aluminium Industry Expansion

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    <正>Information from China Nonferrous Metals Industry Association (CNIA) shows that new government policies on China’s aluminium industry will be released soon in order to control the rapid expansion of the aluminium industry which consumes large amount of power resources. Based on the new policies, investors of

  20. Aluminium salt slag characterization and utilization--a review.

    Science.gov (United States)

    Tsakiridis, P E

    2012-05-30

    Aluminium salt slag (also known as aluminium salt cake), which is produced by the secondary aluminium industry, is formed during aluminium scrap/dross melting and contains 15-30% aluminium oxide, 30-55% sodium chloride, 15-30% potassium chloride, 5-7% metallic aluminium and impurities (carbides, nitrides, sulphides and phosphides). Depending on the raw mix the amount of salt slag produced per tonne of secondary aluminium ranges from 200 to 500 kg. As salt slag has been classified as toxic and hazardous waste, it should be managed in compliance with the current legislation. Its landfill disposal is forbidden in most of the European countries and it should be recycled and processed in a proper way by taking the environmental impact into consideration. This paper presents a review of the aluminium salt slag chemical and mineralogical characteristics, as well as various processes for metal recovery, recycling of sodium and potassium chlorides content back to the smelting process and preparation of value added products from the final non metallic residue.

  1. Aluminium removal from water after defluoridation with the electrocoagulation process.

    Science.gov (United States)

    Sinha, Richa; Mathur, Sanjay; Brighu, Urmila

    2015-01-01

    Fluoride is the most electronegative element and has a strong affinity for aluminium. Owing to this fact, most of the techniques used for fluoride removal utilized aluminium compounds, which results in high concentrations of aluminium in treated water. In the present paper, a new approach is presented to meet the WHO guideline for residual aluminium concentration as 0.2 mg/L. In the present work, the electrocoagulation (EC) process was used for fluoride removal. It was found that aluminium content in water increases with an increase in the energy input. Therefore, experiments were optimized for a minimum energy input to achieve the target value (0.7 mg/L) of fluoride in resultant water. These optimized sets were used for further investigations of aluminium control. The experimental investigations revealed that use of bentonite clay as coagulant in clariflocculation brings down the aluminium concentration of water below the WHO guideline. Bentonite dose of 2 g/L was found to be the best for efficient removal of aluminium.

  2. Chalco Calls for End of More Control Measures on Aluminium

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正> To control the investment rush in electrolyticaluminium in recent years and ensure thehealthy development of China’s aluminium in-dustry, the State Council recently released aseries of adjustment policies and control meas-ures,which effectively prevented theinvestment rush and limited the aluminium out-put growth.

  3. Combined Corrosion and Wear of Aluminium Alloy 7075-T6

    NARCIS (Netherlands)

    Liu, Y.; Mol, J.M.C.; Janssen, G.C.A.M.

    2016-01-01

    The aluminium alloy 7075-T6 is widely used in engineering. In some applications, like slurry transport, corrosion and abrasion occur simultaneously, resulting in early material failure. In the present work, we investigated the combined effect of corrosion and wear on the aluminium alloy 7075-T6. We

  4. Usage of neural network to predict aluminium oxide layer thickness.

    Science.gov (United States)

    Michal, Peter; Vagaská, Alena; Gombár, Miroslav; Kmec, Ján; Spišák, Emil; Kučerka, Daniel

    2015-01-01

    This paper shows an influence of chemical composition of used electrolyte, such as amount of sulphuric acid in electrolyte, amount of aluminium cations in electrolyte and amount of oxalic acid in electrolyte, and operating parameters of process of anodic oxidation of aluminium such as the temperature of electrolyte, anodizing time, and voltage applied during anodizing process. The paper shows the influence of those parameters on the resulting thickness of aluminium oxide layer. The impact of these variables is shown by using central composite design of experiment for six factors (amount of sulphuric acid, amount of oxalic acid, amount of aluminium cations, electrolyte temperature, anodizing time, and applied voltage) and by usage of the cubic neural unit with Levenberg-Marquardt algorithm during the results evaluation. The paper also deals with current densities of 1 A · dm(-2) and 3 A · dm(-2) for creating aluminium oxide layer.

  5. Durability of Lacquered Aluminium Profile Considering Tropical Weather Conditions

    Directory of Open Access Journals (Sweden)

    Rigoberto Marrero Águila

    2013-11-01

    Full Text Available Searching for solutions against the degradation of materials by corrosion effect, is a common practice to use alloys such as aluminium instead of steel due to the advantages obtained. The lacquered aluminium profiles can substitute other materials like wood, in the carpentry production, becoming an economic saving. There is an increasingly use of aluminium replacing other traditional materials in the constructions in process, but its quality has been reduced in a considerable amount of installations. In this research, aluminium profiles from five different sources were submitted to a trial in natural exposition conditions at the Tropical weather condition Testing Lab, in order to evaluate their behaviour and establish, for the first time in our country, standing rules for lacquered aluminium profiles to be strictly fulfilled by manufacturers and importers. The results will allow modifying thickness standards of this type of coating, to guaranty its durability and to eliminate the failures provoked by our high severe weather conditions.

  6. Experimental investigations on mechanical behavior of aluminium metal matrix composites

    Science.gov (United States)

    Rajesh, A. M.; Kaleemulla, Mohammed

    2016-09-01

    Today we are widely using aluminium based metal matrix composite for structural, aerospace, marine and automobile applications for its light weight, high strength and low production cost. The purpose of designing metal matrix composite is to add the desirable attributes of metals and ceramics to the base metal. In this study we developed aluminium metal matrix hybrid composite by reinforced Aluminium7075 alloy with silicon carbide (SiC) and aluminium oxide (alumina) by method of stir casting. This technique is less expensive and very effective. The Hardness test and Wear test were performed on the specimens which are prepared by stir casting techniques. The result reveals that the addition of silicon carbide and alumina particles in aluminium matrix improves the mechanical properties.

  7. Aluminium/iron reinforced polyfurfuryl alcohol resin as advanced biocomposites

    Directory of Open Access Journals (Sweden)

    Rakesh Kumar

    2016-07-01

    Full Text Available Aluminium and iron are widely used in construction sectors for the preparation of advanced composites with epoxy resins as matrices. In recent times, there are several reports on the polymerization of polyfufuryl alcohol (PFA a thermoset bioresins from furfuryl alcohol (FA. FA is obtained from waste of sugarcane bagasse. In this work, first the possibility of curing PFA from FA in the presence of aluminium or iron has been explored. Absorbance results from colorimeter/spectrophotometerindicated that the curing of FA to PFA in presence of aluminium started easily while in presence of iron the curing of FA to PFA could not start. Based on the above results, aluminium wire reinforced composites were successfully prepared with three different weight fractions (0.13, 0.09 and 0.07 of aluminium wire. The mechanical properties of these composites were determined theoretically and reported.

  8. Forming of aluminium alloy friction stir welds

    Science.gov (United States)

    Bruni, Carlo

    2016-10-01

    The present paper aims at investigating, through analytical models, numerical models and experiments, the effect of the warm deformation phase, realised with an in temperature upsetting, on the weld previously performed by friction stir lap welding on aluminium alloy blanks. The investigation allows to show the deformation zones after upsetting that determine the homogenisation of the weld section. The analytical model allows to relate the friction factor with the upsetting load. The presence on the weld of not elevated friction factor values determines the deformation and localisation levels very useful for the weld. Such methodology allows to improve the weld itself with the forming phase.

  9. Friction stir welding of single crystal aluminium

    DEFF Research Database (Denmark)

    Fonda, Richard Warren; Wert, John A.; Reynolds, A.P.

    2007-01-01

    Friction stir welds were prepared in different orientations in an aluminium single crystal. The welds were quenched to preserve the microstructure surrounding the tool and then electron backscattered diffraction was used to reveal the generation of grain boundaries and the evolution...... of crystallographic texture around the tool in each weld. The extent of both dynamic recrystallisation and conventional recrystallisation varied considerably as a function of weld orientation. As the base plate begins to interact with the deformation field surrounding the tool, regions of the single crystal rotate...

  10. CERN: very large magnet with aluminium winding

    Energy Technology Data Exchange (ETDEWEB)

    Wittgenstein, F.A.

    1984-10-25

    The construction of an octagonal solenoid from trapezoidal plates of Al, 6m long and 6cm thick, assembled by electron beam welding, for installation in a laboratory 50m underground is described. The objective is to create a field of 0.5T in a volume of 1000m/sup 3/ for the L3 particle detector of the LEP accelerator project. Principal dimensions and weights of the structure are given and its three stages of implementation are described, with reference to the contributions from the Swiss aluminium industry.

  11. Volatilisation and oxidation of aluminium scraps fed into incineration furnaces

    Energy Technology Data Exchange (ETDEWEB)

    Biganzoli, Laura, E-mail: laura.biganzoli@mail.polimi.it [Politecnico di Milano, Piazza L. Da Vinci 32, 20133 Milano (Italy); Gorla, Leopoldo; Nessi, Simone; Grosso, Mario [Politecnico di Milano, Piazza L. Da Vinci 32, 20133 Milano (Italy)

    2012-12-15

    Highlights: Black-Right-Pointing-Pointer Aluminium packaging partitioning in MSW incineration residues is evaluated. Black-Right-Pointing-Pointer The amount of aluminium packaging recoverable from the bottom ashes is evaluated. Black-Right-Pointing-Pointer Aluminium packaging oxidation rate in the residues of MSW incineration is evaluated. Black-Right-Pointing-Pointer 80% of aluminium cans, 51% of trays and 27% of foils can be recovered from bottom ashes. - Abstract: Ferrous and non-ferrous metal scraps are increasingly recovered from municipal solid waste incineration bottom ash and used in the production of secondary steel and aluminium. However, during the incineration process, metal scraps contained in the waste undergo volatilisation and oxidation processes, which determine a loss of their recoverable mass. The present paper evaluates the behaviour of different types of aluminium packaging materials in a full-scale waste to energy plant during standard operation. Their partitioning and oxidation level in the residues of the incineration process are evaluated, together with the amount of potentially recoverable aluminium. About 80% of post-consumer cans, 51% of trays and 27% of foils can be recovered through an advanced treatment of bottom ash combined with a melting process in the saline furnace for the production of secondary aluminium. The residual amount of aluminium concentrates in the fly ash or in the fine fraction of the bottom ash and its recovery is virtually impossible using the current eddy current separation technology. The average oxidation levels of the aluminium in the residues of the incineration process is equal to 9.2% for cans, 17.4% for trays and 58.8% for foils. The differences between the tested packaging materials are related to their thickness, mechanical strength and to the alloy.

  12. Aluminium matrix composites: Challenges and opportunities

    Indian Academy of Sciences (India)

    M K Surappa

    2003-02-01

    Aluminium matrix composites (AMCs) refer to the class of light weight high performance aluminium centric material systems. The reinforcement in AMCs could be in the form of continuous/discontinuous fibres, whisker or particulates, in volume fractions ranging from a few percent to 70%. Properties of AMCs can be tailored to the demands of different industrial applications by suitable combinations of matrix, reinforcement and processing route. Presently several grades of AMCs are manufactured by different routes. Three decades of intensive research have provided a wealth of new scientific knowledge on the intrinsic and extrinsic effects of ceramic reinforcement vis-a-vis physical, mechanical, thermo-mechanical and tribological properties of AMCs. In the last few years, AMCs have been utilised in high-tech structural and functional applications including aerospace, defence, automotive, and thermal management areas, as well as in sports and recreation. It is interesting to note that research on particle-reinforced cast AMCs took root in India during the 70’s, attained industrial maturity in the developed world and is currently in the process of joining the mainstream of materials. This paper presents an overview of AMC material systems on aspects relating to processing, microstructure, properties and applications.

  13. Reactions on carbon anodes in aluminium electrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Eidet, Trygve

    1997-12-31

    The consumption of carbon anodes and energy in aluminium electrolysis is higher than what is required theoretically. This thesis studies the most important of the reactions that consume anode materials. These reactions are the electrochemical anode reaction and the airburn and carboxy reactions. The first part of the thesis deals with the kinetics and mechanism of the electrochemical anode reaction using electrochemical impedance spectroscopy. The second part deals with air and carboxy reactivity of carbon anodes and studies the effects of inorganic impurities on the reactivity of carbon anodes in the aluminium industry. Special attention is given to sulphur since its effect on the carbon gasification is not well understood. Sulphur is always present in anodes, and it is expected that the sulphur content of available anode cokes will increase in the future. It has also been suggested that sulphur poisons catalyzing impurities in the anodes. Other impurities that were investigated are iron, nickel and vanadium, which are common impurities in anodes which have been reported to catalyze carbon gasification. 88 refs., 92 figs., 24 tabs.

  14. Study of ac electrical properties of aluminium-epoxy composites

    Energy Technology Data Exchange (ETDEWEB)

    Elimat, Z M [Applied Science Department, Ajloun University College, Al-Balqa Applied University, Amman (Jordan); Zihlif, A M [Physics Department, University of Jordan, Amman (Jordan); Ragosta, G [Institute of Chemistry and Polymer Technology (ICTP), CNR-Possouli, Napoli (Italy)], E-mail: adzh@ju.edu.jo

    2008-08-21

    Ac electrical properties of aluminium flakes-epoxy composites were studied as a function of the composition, frequency and temperature. The dielectric constant increased smoothly with an increase in the concentration of aluminium. An increase in the dielectric constant was observed with the temperature as well as with a decrease in the frequency. The observed increase in the values of the dielectric constant with the aluminium concentration was attributed to interfacial polarization. It was found that ac electrical conductivity increases with increasing content of aluminium, temperature and frequency. The observed enhancement in ac conductivity is attributed to the increase in the number of conduction paths created by the aluminium flake contacts in the composite to give a higher electrical conductivity. Also, the activation energy of aluminium flakes-epoxy composites was determined, as well as the values of the dielectric constant. Compared with various theoretical models, Bruggman's formula gives a better fit. The universal power-law model of ac conductivity is observed in epoxy-aluminium composites. The calculated power exponent (about unity) is physically acceptable within this applied model.

  15. Does allergen-specific immunotherapy induce contact allergy to aluminium?

    Science.gov (United States)

    Netterlid, Eva; Hindsén, Monica; Siemund, Ingrid; Björk, Jonas; Werner, Sonja; Jacobsson, Helene; Güner, Nuray; Bruze, Magnus

    2013-01-01

    Persistent, itching nodules have been reported to appear at the injection site after allergen-specific immuno-therapy with aluminium-precipitated antigen extract, occasionally in conjunction with contact allergy to aluminium. This study aimed to quantify the development of contact allergy to aluminium during allergen-specific immunotherapy. A randomized, controlled, single-blind multicentre study of children and adults entering allergen-specific immunotherapy was performed using questionnaires and patch-testing. A total of 205 individuals completed the study. In the 3 study groups all subjects tested negative to aluminium before allergen-specific immunotherapy and 4 tested positive after therapy. In the control group 4 participants tested positive to aluminium. Six out of 8 who tested positive also had atopic dermatitis. Positive test results were found in 5/78 children and 3/127 adults. Allergen-specific immunotherapy was not shown to be a risk factor for contact allergy to aluminium. Among those who did develop aluminium allergy, children and those with atopic dermatitis were more highly represented.

  16. Thickness Evaluation of Aluminium Plate Using Pulsed Eddy Current Technique

    Science.gov (United States)

    Singh, Gurpartap; Bapat, Harsh Madhukar; Singh, Bhanu Pratap; Bandyopadhyay, Manojit; Puri, Rakesh Kumar; Badodkar, Deepak Narayanrao

    2013-10-01

    This paper describes a pulsed eddy current (PEC) based non-destructive testing system used for detection of thickness variation in aluminium plate. A giant magneto-resistive sensor has been used instead of pick up coil for detecting resultant magnetic field. The PEC response signals obtained from 1 to 5 mm thickness change in aluminium plate were investigated. Two time domain features, namely peak value and time to peak, of PEC response were used for extracting information about thickness variation in aluminium plate. The variation of peak value and time to peak with thickness was compared. A program was developed to display the thickness variation of the tested sample.

  17. Corrosion issues of powder coated AA6060 aluminium profiles

    DEFF Research Database (Denmark)

    Din, Rameez Ud; Valgarðsson, Smári; Jellesen, Morten Stendahl

    2015-01-01

    In this study detailed microstructural investigation of the reason for unexpected corrosion of powder coated aluminium alloy AA6060 windows profiles has been performed. The results from this study reveals that the failure of the window profiles was originated from the surface defects present...... on the extruded AA6060 aluminium profile after metallurgical process prior to powder coating. Surface defects are produced due to intermetallic particles in the alloy, which disturb the flow during the extrusion process. The corrosion mechanism leading to the failure of the powder coated AA6060 aluminium profiles...

  18. Effects of aluminium surface morphology and chemical modification on wettability

    DEFF Research Database (Denmark)

    Rahimi, Maral; Fojan, Peter; Gurevich, Leonid;

    2014-01-01

    Aluminium alloys are some of the predominant metals in industrial applications such as production of heat exchangers, heat pumps. They have high heat conductivity coupled with a low specific weight. In cold working conditions, there is a risk of frost formation on the surface of aluminium...... in the presence of water vapour, which can lead to the deterioration of equipment performance. This work addresses the methods of surface modification of aluminium and their effect of the underlying surface morphology and wettability, which are the important parameters for frost formation. Three groups of real...

  19. Cold forming of aluminium - State of the art

    DEFF Research Database (Denmark)

    Bay, Niels

    1997-01-01

    to that of unalloyed steel. After description of the different types of alloys and their individual properties and applications, the special requirements for tool design by cold forging in aluminium is discussed. Finally, a large number of industrial examples on cold forged aluminium components are presented. (C) 1997......The ongoing development of cold forging technology has been manifested lately by the increasing application of components in cold forged aluminium alloys. Applying precipitation hardening alloys components with great strength/weight ratio can be produced with a strength comparable...

  20. Study of fatigue behaviour of 7475 aluminium alloy

    Indian Academy of Sciences (India)

    B B Verma; J D Atkinson; M Kumar

    2001-04-01

    Fatigue properties of a thermomechanically treated 7475 aluminium alloy have been studied in the present investigation. The alloy exhibited superior fatigue life compared to conventional structural aluminium alloys and comparable stage II crack growth rate. It was also noticed that the fatigue crack initiated from a surface grain and the crack extension was dominated by ductile striations. Analysis also revealed that this alloy possessed fracture toughness and tensile properties superior to that noticed with other structural aluminium alloys. Therefore the use of this alloy can safely reduce the overall weight of the aircraft.

  1. Optimization of Magnesium Metal into Commercially Pure Aluminium

    Directory of Open Access Journals (Sweden)

    Vandana J Rao

    2014-02-01

    Full Text Available The present investigation, involve development of Al-Mg systems by addition of magnesium into commercially pure aluminium. The amounts of magnesium added into commercially pure aluminium are of 1 and 2 wt%. The recoveries of magnesium are around 85-90%.Remaining Mg react with oxygen and float on the liquid aluminium. Presence of magnesium creates two phenomena. One is solid solution hardening and other is intermetallics formation. Both the phenomena checked by microstructural changes and by measuring the electrical conductivity values. By increasing the Mg, content mechanical properties (hardness and tensile strength increases and electrical conductivity decreases.

  2. Effect of pressurized steam on AA1050 aluminium

    DEFF Research Database (Denmark)

    Jariyaboon, Manthana; Møller, Per; Ambat, Rajan

    2012-01-01

    Purpose - The purpose of this paper is to understand the effect of pressurized steam on surface changes, structures of intermetallic particles and corrosion behavior of AA1050 aluminium. Design/methodology/approach - Industrially pure aluminium (AA1050, 99.5 per cent) surfaces were exposed...... reactivities was observed due to the formation of the compact oxide layer. Originality/value - This paper reveals a detailed investigation of how pressurized steam can affect the corrosion behaviour of AA1050 aluminium and the structure of Fe-containing intermetallic particles....

  3. Preparation of Aluminium Oxynitride by Carbothermal Reduction of Aluminium Oxide in a Flowing N2 Atmosphere

    Institute of Scientific and Technical Information of China (English)

    LIYa-wei; YUANRun-zhang; 等

    1996-01-01

    Carbothermal reduction of alumina into aluminium oxynitride(AlON) spinel in a flowing nitrogen atmosphere was studied.The effects of Al2O3/C ratio temperature,soaking time,heating rate molding pressure of samples,and nitrogen flow rate on reactions were investigated.Then the stability of AlON was elucidated and AlON wa confirmed as an intermediate compound in reduction of alumina.

  4. Protection of aluminium by duplex coatings

    Energy Technology Data Exchange (ETDEWEB)

    Musil, J. [Ceska Akademie Ved, Prague (Czech Republic). Fyzikalni Ustav; Vlcek, J. [West Bohemia Univ., Plzen (Czech Republic). Dept. of Phys.; Jezek, V. [West Bohemia Univ., Plzen (Czech Republic). Dept. of Phys.; Benda, M. [West Bohemia Univ., Plzen (Czech Republic). Dept. of Phys.

    1995-11-01

    The paper reports on a new way of producing duplex coatings consisting of two steps. First, the substrate is coated by a physically vapour-deposited coating. Then, this precoated substrate is plasma nitrided or vacuum heat treated. This method was tested in the protection of substrates made of aluminium with a sputtered Ti coating about 5 {mu}m thick. The as-deposited and then plasma-nitrided or vacuum-heat-treated (Ti coating)/(Al substrate) couple was characterized by elemental depth profiles measured by glow discharge optical spectroscopy. It was shown that both the plasma nitriding and vacuum heat treatment process can stimulate a strong interdiffusion between Ti and the substrate elements. It results not only in the formation of a very broad interfacial region with a dramatic redistribution of the substrate elements in the Ti film but also in a formation of intermetallic Ti-Al compounds. This new duplex coating technique is described in detail. (orig.)

  5. Telangiectasia in aluminium workers: a follow up.

    Science.gov (United States)

    Thériault, G; Gingras, S; Provencher, S

    1984-08-01

    A five step investigation was carried out to gain a better understanding of the morbidity that accompanied the development of telangiectasia on aluminium workers and to find its cause. Fifty workers with multiple telangiectasia when matched with normal controls showed the same amount of illness except that evidence of ischaemia on the ECG was found in nine cases and one control. The cases did not show an excess of abnormal biochemical tests. The basic histopathological lesion affected the surrounding tissue rather than the vessels themselves. Working in the current environment and wearing masks seems to protect young workers from developing the lesions. The Soderberg and not the prebake process was associated with the lesions; the causative agent is probably a gas that contains both hydrocarbons and fluoride components emitted from the electrolytic reactors.

  6. Mechanical behaviour of aluminium-lithium alloys

    Indian Academy of Sciences (India)

    N Eswara Prasad; A A Gokhale; P Rama Rao

    2003-02-01

    Aluminium-lithium alloys hold promise of providing a breakthrough response to the crying need for lightweight alloys for use as structurals in aerospace applications. Considerable worldwide research has gone into developing a range of these alloys over the last three decades. As a result, substantial understanding has been developed of the microstructure-based micromechanisms of strengthening, of fatigue and fracture as well as of anisotropy in mechanical properties. However, these alloys have not yet greatly displaced the conventionally used denser Al alloys on account of their poorer ductility, fracture toughness and low cycle fatigue resistance. This review aims to summarise the work pertaining to study of structure and mechanical properties with a view to indicate the directions that have been and can be pursued to overcome property limitations.

  7. Experimental analysis of cut welding in aluminium

    DEFF Research Database (Denmark)

    Dorph, Pernille; De Chiffre, Leonardo; Bay, Niels

    1993-01-01

    Cut welding is a newly developed cold pressure welding process. In the present work, an experimental investigation was carried out analyzing the mechanisms involved in cut welding of a block to a strip. Experiments were carried out in technically pure aluminium. The investigation has involved...... tensile testing and metallographic investigations of the welds. The results show that this variant of cut welding is a very reproducible process giving a weld strength equal to 30-40% the strength of the parent material. The experiments have shown that the reason for this relatively low strength...... is an uneven pressure distribution along the weld due to a wave formed during sliding. Attempts to alter the material flow during sliding are presented....

  8. Silane based coating of aluminium mold

    DEFF Research Database (Denmark)

    2013-01-01

    comprising a chemically bonded monolayer of silane compounds on the at least one surface wherein the silane is a halogenated silane. The at least one surface coated with the anti-stiction coating may be configured to withstand an injection molding process at a pressure above 100 MPa. Furthermore, a mold......A method of preparing an aluminum mold for injection molding is provided, the method comprises the steps of providing an aluminum mold having a least one surface, subjecting the at least one surface to a gas or liquid phase silane to thereby form an anti-stiction coating, the anti-stiction coating...... having at least one closed cavity is provided, at least one surface of the at least one cavity being an aluminium surface coated with a silane based coating layer. The silane based anti-stiction coating improves the anti-stiction properties of the mold which may allow for molding and demolding...

  9. Anodic aluminium oxide catalytic membranes for asymmetric epoxidation.

    Science.gov (United States)

    Cho, So-Hye; Walther, Nolan D; Nguyen, SonBinh T; Hupp, Joseph T

    2005-11-14

    Catechol-functionalized (salen)Mn complexes can be supported on mesoporous anodized aluminium oxide disks to yield catalytic membranes that are highly active in the enantioselective epoxidation of olefins when being deployed in a forced-through-flow reactor.

  10. COMPARATION BETWEEN NONDESTRUCTIVE TESTING METHODS FOR THE ALUMINIUM BRAZED PIECES

    Directory of Open Access Journals (Sweden)

    Dan NIŢOI

    2014-05-01

    Full Text Available Presented paper refers to different control methods used in aluminium brazed joining because of possible defects. Low joining complexity permits exact damages position in relation with materials geometry.

  11. Aluminium leaching from red mud by filamentous fungi.

    Science.gov (United States)

    Urík, Martin; Bujdoš, Marek; Milová-Žiaková, Barbora; Mikušová, Petra; Slovák, Marek; Matúš, Peter

    2015-11-01

    This contribution investigates the efficient and environmentally friendly aluminium leaching from red mud (bauxite residue) by 17 species of filamentous fungi. Bioleaching experiments were examined in batch cultures with the red mud in static, 7-day cultivation. The most efficient fungal strains in aluminium bioleaching were Penicillium crustosum G-140 and Aspergillus niger G-10. The A. niger G-10 strain was capable to extract up to approximately 141 mg·L(-1) of aluminium from 0.2 g dry weight red mud. Chemical leaching with organic acids mixture, prepared according to A. niger G-10 strain's respective fungal excretion during cultivation, proved that organic acids significantly contribute to aluminium solubilization from red mud.

  12. Incremental forming of aluminium alloys in cryogenic environment

    Science.gov (United States)

    Vanhove, Hans; Mohammadi, Amirahmad; Duflou, Joost R.

    2016-10-01

    Incremental Sheet Forming processes suffer from stringent forming limits, restricting the range of producible geometries. Through in-process cooling of the sheet to cryogenic level, this paper explores the potential of altering material properties benefiting the formability and residual hardness of different aluminium alloys. Global cooling of aluminium sheets with liquid nitrogen and dry ice allows to reach temperatures of 78K and 193K respectively. Extended with experiments at room temperature (293K), these tests form a base for comparison of surface quality, formability and residual hardness. As an aluminium alloy commonly used for its high strength to weight ratio, but suffering from limited formability compared to draw-quality steels, AA5083-H111 is of interest for cryogenic treatment. AA1050-H24 is included in the test campaign as a base for commercially pure aluminium.

  13. Aluminium dynamics and proton buttering in undistributed samples of acidified forest soils; Aluminium-Dynamik und Protonenpufferung in ungestoerten Proben versauerter Waldboeden

    Energy Technology Data Exchange (ETDEWEB)

    Fuchs, E.

    1992-12-31

    In this work non-displaced soil samples were used to test the reaction of acidified forest soils in the aluminium buffering range to different proton concentrations. The examined quantities were the proton buffering rate in the macropore spaces and the correlated rate of aluminium release. Furthermore, the types of aluminium bondage occuring in the soil solution and their influence on the aluminium dynamics within the profile were determined. The significance of species distribution for the interpretation of the toxic potential of aluminium is illuminated. The influence of soil structure on proton buffering, aluminium release and species distribution is described from a global viewpoint. (orig.) [Deutsch] In der vorliegenden Arbeit wird an natuerlich gelagerten Bodenproben die Reaktion versauerter Waldboeden im Aluminium-Pufferbereich auf unterschiedlich starke Protonenbelastungen untersucht. Dabei interessiert die Rate der Protonenpufferung im Makroporenraum einhergehend mit der Menge freigesetzten Aluminiums. Darueberhinaus wird untersucht, welche Aluminium-Bindungsformen in der Bodenloesung vorliegen und welchen Einfluss diese auf die Aluminium-Dynamik innerhalb des Profils haben. Die Bedeutung der Speziesverteilung fuer die Interpretation potentieller Aluminium-Toxizitaet wird beleuchtet. Uebergreifend wird der Einfluss der Bodenstruktur auf Protonenpufferung, Aluminium-Freisetzung sowie Speziesverteilung herausgestellt. (orig.)

  14. Metal-Ceramic Interfaces in Laser Coated Aluminium Alloys

    NARCIS (Netherlands)

    Zhou, X.B.; Hosson, J.Th.M. De

    1994-01-01

    A novel process was developed to firmly coat an aluminium alloy, Al6061, with α-Al2O3 by means of laser processing. In this approach a mixture of SiO2 and Al powder was used to inject in the laser melted surface of aluminium. A reaction product α-Al2O3 layer of a thickness of 100 µm was created whic

  15. China’s Export of Fabricated Aluminium Keeps Rising

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    <正>Affected by the State macro economic adjustment policies, China’s export of primary aluminium has decreased obviously. However, China’s export of fabricated aluminum is increasing rapidly, which has led to the investment rush of the aluminium industry, leading to the serious concern by the government. Market rumors are spreading that the government will soon adjust the export tax rebate rates so as to curb such a trend.

  16. Behaviour and modelling of selfpiercing riveted connections using aluminium rivets

    OpenAIRE

    Hoang, Nguyen-Hieu

    2011-01-01

    The present thesis is concerned with the behaviour and modelling of self-piercing riveted connections using aluminium rivets. The objective has been to establish a database on the behaviour of self-piercing riveted connections using aluminium rivets with respect to the riveting process, the mechanical behaviour of single riveted connections and the structural behaviour of riveted joints. The objective has been met by a combination of laboratory tests, modelling and non-linear finite element n...

  17. Adhesive Bonding of Aluminium Alloy A5754 by Epoxy Resins

    Directory of Open Access Journals (Sweden)

    Ivan Michalec

    2013-01-01

    Full Text Available Joining thin sheets of aluminium and its alloys is a promising area in the field of joining materials. Nowadays, joining methods that do not melt the material itself are increasingly being utilised. This paper deals with adhesive bonding of aluminium alloy A5754 by two-component epoxy resins. Theresults show that joints bonded by Hysol 9466 have appropriate mechanical properties, but that joints bonded by Hysol 9492 have better thermal stability.

  18. An interaction of beta-amyloid with aluminium in vitro.

    Science.gov (United States)

    Exley, C; Price, N C; Kelly, S M; Birchall, J D

    1993-06-21

    We have used circular dichroism spectroscopy to confirm that, in a membrane-mimicking solvent, A beta P(1-40) adopts a partially helical conformation and we have demonstrated the loss of this structure in the presence of physiologically relevant concentrations of aluminium. This is the first evidence of a direct biochemical interaction between aluminium and beta-amyloid and may have important implications for the pathogenesis of Alzheimer's disease.

  19. Melting and solidification of bismuth inclusions in aluminium

    DEFF Research Database (Denmark)

    Thoft, N.B.; Bohr, J.; Buras, B.

    1995-01-01

    Supercooling of crystalline bismuth inclusions in aluminium crystals has been observed and studied with different techniques: x-ray diffraction, in situ Rutherford backscattering/channelling spectrometry and transmission electron microscopy. The results of the measurements with different experime......Supercooling of crystalline bismuth inclusions in aluminium crystals has been observed and studied with different techniques: x-ray diffraction, in situ Rutherford backscattering/channelling spectrometry and transmission electron microscopy. The results of the measurements with different...

  20. Lake restoration with aluminium, bentonite and Phoslock: the effect on sediment stability and light attenuation

    DEFF Research Database (Denmark)

    Egemose, Sara; Reitzel, Kasper; Flindt, Mogens

    treatments on aluminium mobility, sediment stability or light climate. A laboratory flume experiment including three shallow Danish lakes was conducted. We measured the effects of aluminium, Phoslock (a commercial product), bentonite, and a combination of bentonite/aluminium. Each treatment caused a varying...... consolidation of the sediment. The largest consolidation occurred using Phoslock- and bentonite-addition followed by bentonite/aluminium-addition, whereas aluminium alone had no effect. Sediment stability thresholds were measured before and after addition. Especially Phoslock, but also bentonite and bentonite....../aluminium increased sediment erosion threshold, with respectively 200%, 43% and 57%. Aluminium, bentonite/aluminium, and Phoslock improved the light conditions in the water phase, with respectively 60%, 57% and 50%, whereas bentonite created higher turbidity. Conclusively aluminium improved the light conditions...

  1. The binding, transport and fate of aluminium in biological cells.

    Science.gov (United States)

    Exley, Christopher; Mold, Matthew J

    2015-04-01

    Aluminium is the most abundant metal in the Earth's crust and yet, paradoxically, it has no known biological function. Aluminium is biochemically reactive, it is simply that it is not required for any essential process in extant biota. There is evidence neither of element-specific nor evolutionarily conserved aluminium biochemistry. This means that there are no ligands or chaperones which are specific to its transport, there are no transporters or channels to selectively facilitate its passage across membranes, there are no intracellular storage proteins to aid its cellular homeostasis and there are no pathways which evolved to enable the metabolism and excretion of aluminium. Of course, aluminium is found in every compartment of every cell of every organism, from virus through to Man. Herein we have investigated each of the 'silent' pathways and metabolic events which together constitute a form of aluminium homeostasis in biota, identifying and evaluating as far as is possible what is known and, equally importantly, what is unknown about its uptake, transport, storage and excretion.

  2. Volatilisation and oxidation of aluminium scraps fed into incineration furnaces.

    Science.gov (United States)

    Biganzoli, Laura; Gorla, Leopoldo; Nessi, Simone; Grosso, Mario

    2012-12-01

    Ferrous and non-ferrous metal scraps are increasingly recovered from municipal solid waste incineration bottom ash and used in the production of secondary steel and aluminium. However, during the incineration process, metal scraps contained in the waste undergo volatilisation and oxidation processes, which determine a loss of their recoverable mass. The present paper evaluates the behaviour of different types of aluminium packaging materials in a full-scale waste to energy plant during standard operation. Their partitioning and oxidation level in the residues of the incineration process are evaluated, together with the amount of potentially recoverable aluminium. About 80% of post-consumer cans, 51% of trays and 27% of foils can be recovered through an advanced treatment of bottom ash combined with a melting process in the saline furnace for the production of secondary aluminium. The residual amount of aluminium concentrates in the fly ash or in the fine fraction of the bottom ash and its recovery is virtually impossible using the current eddy current separation technology. The average oxidation levels of the aluminium in the residues of the incineration process is equal to 9.2% for cans, 17.4% for trays and 58.8% for foils. The differences between the tested packaging materials are related to their thickness, mechanical strength and to the alloy.

  3. Role of magnesium in alleviation of aluminium toxicity in plants.

    Science.gov (United States)

    Bose, Jayakumar; Babourina, Olga; Rengel, Zed

    2011-04-01

    Magnesium is pivotal for activating a large number of enzymes; hence, magnesium plays an important role in numerous physiological and biochemical processes affecting plant growth and development. Magnesium can also ameliorate aluminium phytotoxicity, but literature reports on the dynamics of magnesium homeostasis upon exposure to aluminium are rare. Herein existing knowledge on the magnesium transport mechanisms and homeostasis maintenance in plant cells is critically reviewed. Even though overexpression of magnesium transporters can alleviate aluminium toxicity in plants, the mechanisms governing such alleviation remain obscure. Possible magnesium-dependent mechanisms include (i) better carbon partitioning from shoots to roots; (ii) increased synthesis and exudation of organic acid anions; (iii) enhanced acid phosphatase activity; (iv) maintenance of proton-ATPase activity and cytoplasmic pH regulation; (v) protection against an aluminium-induced cytosolic calcium increase; and (vi) protection against reactive oxygen species. Future research should concentrate on assessing aluminium toxicity and tolerance in plants with overexpressed or antisense magnesium transporters to increase understanding of the aluminium-magnesium interaction.

  4. A mechanism for acute aluminium toxicity in fish.

    Science.gov (United States)

    Exley, C; Chappell, J S; Birchall, J D

    1991-08-07

    Aluminium is acutely toxic to fish in acid waters. The gill is the principal target organ and death is due to a combination of ionoregulatory, osmoregulatory and respiratory dysfunction. The toxic mechanism has hitherto received little direct consideration and is unknown. In this paper the mechanism of acute aluminium toxicity is approached from a chemical perspective. Symptomatic evidence of toxicity is taken from the literature and combined with our own research to elucidate a biochemically sound model to describe a possible mechanism of acute aluminium toxicity in fish. The proposed model delineates the chemical conditions immediately adjacent to the gill surface and emphasizes their importance in aluminium's toxic mode of action. The mechanism is shown to be bipartite. Aluminium binding to functional groups both apically located at the gill surface and intracellularly located within lamellar epithelial cells disrupts the barrier properties of the gill epithelium. The concomitant iono- and osmoregulatory dysfunction results in accelerated cell necrosis, sloughing and death of the fish. The mechanism of epithelial cell death is proposed as a general mechanism of aluminium-induced accelerated cell death.

  5. China Rescinds the Export Tax on Aluminium Alloys Made by Scrap

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    <正>According to an official from the Tax Regulations Office under China’s State Council, from July 1st 2005, China will rescind the 5 per cent export tax on the aluminium alloys produced by using aluminium alloys scrap. An official from the State Council’s office said that through investigation they found that most aluminium alloys produced from aluminium scrap are not that energy consuming compared to primary aluminium. Starting from January 1st 2005, China decided to collect 5 per cent export tax on aluminium so as to control the industry development connected with high energy cost.

  6. Accumulation and toxicity of aluminium-contaminated food in the freshwater crayfish, Pacifastacus leniusculus.

    Science.gov (United States)

    Woodburn, Katie; Walton, Rachel; McCrohan, Catherine; White, Keith

    2011-10-01

    The accumulation and toxicity of aluminium in freshwater organisms have primarily been examined following aqueous exposure. This study investigated the uptake, excretion and toxicity of aluminium when presented as aluminium-contaminated food. Adult Pacifastacus leniusculus were fed control (3 μg aluminium/g) or aluminium-spiked pellets (420 μg aluminium/g) over 28 days. Half the crayfish in each group were then killed and the remainder fed control pellets for a further 10 days (clearance period). Concentrations of aluminium plus the essential metals calcium, copper, potassium and sodium were measured in the gill, hepatopancreas, flexor muscle, antennal gland (kidney) and haemolymph. Histopathological analysis of tissue damage and sub-cellular distribution of aluminium were examined in the hepatopancreas. Haemocyte number and protein concentration in the haemolymph were analysed as indicators of toxicity. The hepatopancreas of aluminium-fed crayfish contained significantly more aluminium than controls on days 28 and 38, and this amount was positively correlated with the amount ingested. More than 50% of the aluminium in the hepatopancreas of aluminium-fed crayfish was located in sub-cellular fractions thought to be involved in metal detoxification. Aluminium concentrations were also high in the antennal glands of aluminium-fed crayfish suggesting that some of the aluminium lost from the hepatopancreas is excreted. Aluminium exposure via contaminated food caused inflammation in the hepatopancreas but did not affect the number of circulating haemocytes, haemolymph ion concentrations or protein levels. In conclusion, crayfish accumulate, store and excrete aluminium from contaminated food with only localised toxicity.

  7. Bioaccumulation of Aluminium in Hydromacrophytes in Polish Coastal Lakes

    Directory of Open Access Journals (Sweden)

    Senze Magdalena

    2015-03-01

    Full Text Available The research on aluminium content was conducted in water and on aquatic flora of Polish lakes in the central part of the coast. The study included the lakes Sarbsko, Choczewskie, Bia.e, K.odno, D.brze and Salino investigated in the summer of 2013. The examined lakes belong mainly to the direct basin of the Baltic Sea. Samples of aquatic plants and lake waters were collected. In the water samples pH and electrolytic conductivity were measured. The aluminium content was determined both in water and aquatic plants. Submerged hydromacrophyte studies included Myriophyllum alterniflorum L., Potamogeton perfoliatus L. and Ceratophyllum demersum L. Emergent hydromacrophyte studies included Phragmites australis (Cav. Trin. ex Steud., Juncus bulbosus L., Iris pseudacorus L., Eleocharis palustris (L. Roem. % Schult., Phalaris arundinacea L., Carex riparia Curt., Mentha aquatic L., Stratiotes aloides L., Alisma plantago-aquatica L., Glyceria maxima (Hartman Holmb., Sagittaria sagittifolia L., Scirpus lacustris L. and Typha angustifolia L. The purpose of this investigation was the determination of the aluminium content in submerged and emergent hydromacrophytes and also the definition of their bioaccumulative abilities. The average concentration of aluminium in water was 2.68 fęg Al dm.3. The average content of aluminium in plants was 2.8015 mg Al kg.1. The bioaccumulation factor ranged from BCF=19.74 to BCF=16619. On the basis of the analysis of the aluminium content in water and aquatic plants results show that both water and plants were characterized by a moderate level of aluminium. The recorded concentrations indicate a mid-range value and are much lower than those which are quoted for a variety of surface waters in various parts of the world.

  8. Visible Light Photocatalytic Properties of Modified Titanium Dioxide Nanoparticles via Aluminium Treatment

    Directory of Open Access Journals (Sweden)

    Dessy Ariyanti

    2016-03-01

    Full Text Available Titanium dioxide (TiO2 has gained much attentions for the last few decades due to its remarkable performance in photocatalysis and some other related properties. However, its wide bandgap (~3.2 eV can only absorb UV energy which is only ~5% of solar light spectrum. The objective of this research was to improve the photocatalytic activity of TiO2 by improving the optical absorption to the visible light range. Here, colored TiO2 nanoparticles range from light to dark grey were prepared via aluminium treatment at the temperatures ranging from 400 to 600 oC. The modified TiO2 is able to absorb up to 50% of visible light (400-700 nm and shows a relatively good photocatalytic activity in organic dye (Rhodamine B degradation under visible light irradiation compared with the commercial TiO2. Copyright © 2016 BCREC GROUP. All rights reserved Received: 10th November 2015; Revised: 7th January 2016; Accepted: 7th January 20 How to Cite: Ariyanti, D., Dong, J.Z., Dong, J.Y., Gao, W. (2016. Visible Light Photocatalytic Properties of Modified Titanium Dioxide Nanoparticles via Aluminium Treatment. Bulletin of Chemical Reaction Engineering & Catalysis, 11 (1: 40-47. (doi:10.9767/bcrec.11.1.414.40-47 Permalink/DOI: http://dx.doi.org/10.9767/bcrec.11.1.414.40-47

  9. Acute aluminium phosphide poisoning, what is new?

    Directory of Open Access Journals (Sweden)

    Yatendra Singh

    2014-01-01

    Full Text Available Aluminium phosphide (AlP is a cheap solid fumigant and a highly toxic pesticide that is commonly used for grain preservation. AlP has currently generated interest with increasing number of cases in the past four decades because of its increased use for agricultural and nonagricultural purposes, and also its easy availability in the markets has led to its increased misuse to commit suicide. Ingestion is usually suicidal in intent, uncommonly accidental and rarely homicidal. The poison affects all systems, shock, cardiac arrhythmias with varied ECG changes and gastrointestinal features being the most prominent. Diagnosis is made on the basis of clinical suspicion, a positive silver nitrate paper test to phosphine, and gastric aspirate and viscera biochemistry. Treatment includes early gastric lavage with potassium permanganate or a combination of coconut oil and sodium bicarbonate, administration of charcoal and palliative care. Specific therapy includes intravenous magnesium sulphate and oral coconut oil. Unfortunately, the lack of a specific antidote Results in very high mortality and the key to treatment lies in rapid decontamination and institution of resuscitative measures. This article aims to identify the salient features and mechanism of AlP poisoning along with its management strategies and prognostic variables.

  10. Low cost aluminium metal matrix composite

    Energy Technology Data Exchange (ETDEWEB)

    Withers, G.

    2007-03-15

    Low cost, light weight Ultalite{reg_sign} is an Aluminium Metal Matrix Composite (AL-MMC) which utilises wear resistant ceramic particles derived from flyash. Ultalite AL-MMC typically contains between 10 and 30 per cent ceramic particles, and is formulated for the manufacture of wear resistant automotive components. Due to its low density and ease of processing into net shape die casting, Ultalite AL-MMC provides weight savings of up to 60 per cent over components fabricated from cast iron, thereby providing improved fuel efficiency with reduced greenhouse emissions. The original flyash material was sourced from a black coal power station in Queensland, where it contained a wide range of particles sizes. To narrow the size range and to remove impurities, a proprietary pretreatment developed by Dr Thomas Robl and co-researchers at the University of Kentucky was employed. The University of Kentucky developed the technology for the classification and benefaction of flyash to produce high-grade Pozzolan, which is used in Portland Cement product. This technology is now being applied to the production of Ultalite AL-MMC. Testing performed by Dr Robl has shown that the proprietary technology can eliminate the hollow particles, extract detrimental carbon-based impurities and remove the extremely fine and coarse particles. All that remains are dense ceramic particles with an average particle size of approximately 30 {mu}m. 9 refs., 3 figs.

  11. PHASE CONVERSIONS IN METAL-OXIDE COMPOSITIONS ON THE BASIS OF ALUMINIUM AND SILICON OXIDE

    OpenAIRE

    2010-01-01

    The regularities of phase conversions in metal-oxide compositions on the basis of aluminium and silicon oxide with the purpose of silumins synthesis by means of direct restoration of aluminium silicon are studied.

  12. The General Situation of the Scale and Layout of Aluminium Industry in China

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    <正>Since 2002, aluminium industry has become a key industry under the macro control of the country, for which the reason is the aluminium industry in China has seen "repeated construc-tion", "blind investment", "excessive capacity",

  13. Aluminium Matrix Composites Reinforced with Co-continuous Interlaced Phases Aluminium-alumina Needles

    Directory of Open Access Journals (Sweden)

    Elvio de Napole Gregolin

    2002-09-01

    Full Text Available An Al-5SiO2 (5 wt% of SiO2 aluminium matrix fiber composite was produced where the reinforcement consists of fossil silica fibers needles. After being heat-treated at 600 °C, the original fiber morphology was retained but its microstructure changed from solid silica to an interconnected (Al-Si/Al2O3 interlaced structure named co-continuous composite. A technique of powder metallurgy, using commercial aluminium powder and the silica fibers as starting materials, followed by hot extrusion, was used to produce the composite. The co-continuous microstructure was obtained partially or totally on the fibers as a result of the reaction, which occurs during the heat treatment, first by solid diffusion and finally by the liquid Al-Si in local equilibrium, formed with the silicon released by reaction. The internal structure of the fibers was characterized using field emission electron microscope (FEG-SEM and optical microscopy on polished and fractured samples.

  14. Impact properties of aluminium - glass fiber reinforced plastics sandwich panels

    Directory of Open Access Journals (Sweden)

    Mathivanan Periasamy

    2012-06-01

    Full Text Available Aluminium - glass fiber reinforced plastics (GFRP sandwich panels are hybrid laminates consisting of GFRP bonded with thin aluminum sheets on either side. Such sandwich materials are increasingly used in airplane and automobile structures. Laminates with varying aluminium thickness fractions, fiber volume fractions and orientation in the layers of GFRP were fabricated by hand lay up method and evaluated for their impact performance by conducting drop weight tests under low velocity impacts. The impact energy required for initiating a crack in the outer aluminium layer as well as the energy required for perforation was recorded. The impact load-time history was also recorded to understand the failure behavior. The damage depth and the damage area were measured to evaluate the impact resistance. Optical photography and scanning electron micrographs were taken to visualize the crack and the damage zone. The bidirectional cross-ply hybrid laminate (CPHL has been found to exhibit better impact performance and damage resistance than the unidirectional hybrid laminate (UDHL. Increase in aluminium thickness fraction (Al tf and fiber volume fraction (Vf resulted in an increase in the impact energy required for cracking and perforation. On an overall basis, the sandwich panels exhibited better impact performance than the monolithic aluminium.

  15. Elevated urinary excretion of aluminium and iron in multiple sclerosis.

    Science.gov (United States)

    Exley, Christopher; Mamutse, Godwin; Korchazhkina, Olga; Pye, Eleanor; Strekopytov, Stanislav; Polwart, Anthony; Hawkins, Clive

    2006-10-01

    Multiple sclerosis (MS) is a chronic, immune-mediated, demyelinating disease of the central nervous system of as yet unknown aetiology. A consensus of opinion has suggested that the disorder is the result of an interplay between environmental factors and susceptibility genes. We have used a battery of analytical techniques to determine if the urinary excretion of i) markers of oxidative damage; ii) iron and iii) the environmental toxin aluminium and its antagonist, silicon, are altered in relapsing-remitting (RRMS) and secondary progressive MS (SPMS). Urinary concentrations of oxidative biomarkers, MDA and TBARS, were not found to be useful indicators of inflammatory disease in MS. However, urinary concentrations of another potential marker for inflammation and oxidative stress, iron, were significantly increased in SPMS (P0.05). Urinary concentrations of aluminium were also significantly increased in RRMS (Paluminium excretion in the former were similar to those observed in individuals undergoing metal chelation therapy. The excretion of silicon was lower in MS and significantly so in SPMS (Paluminium excretion similar to those seen in aluminium intoxication suggested that aluminium may be a hitherto unrecognized environmental factor associated with the aetiology of MS. If aluminium is involved in MS then an increased dietary intake of its natural antagonist, silicon, might be a therapeutic option.

  16. Microfabrication of an anodic oxide film by anodizing laser-textured aluminium

    OpenAIRE

    2007-01-01

    A simple method for the fabrication of microstructures of an aluminium anodic oxide film (anodic alumina) by anodizing laser-textured aluminium is demonstrated. In the process, the aluminium substrate was first textured by a low power laser beam, and then the textured aluminium was subjected to anodizing, to develop a continuous, thick porous layer on the textured surface. Microstructures with a depth of a few to several tens of micrometres were fabricated successfully on the anodic oxide fil...

  17. Does antiperspirant use increase the risk of aluminium-related disease, including Alzheimer's disease?

    Science.gov (United States)

    Exley, C

    1998-03-01

    Aluminium salts are the major constituent of many widely used antiperspirant products. The use of such antiperspirants has been linked with the systemic accumulation of aluminium and an increased risk of Alzheimer's disease. But can the frequent use of aluminium-based antiperspirants lead to the accumulation of toxic levels of aluminium? And are there measures that we can take to reduce such accumulation without reducing the effectiveness of antiperspirants?

  18. Determination of aluminium in groundwater samples by GF-AAS, ICP-AES, ICP-MS and modelling of inorganic aluminium complexes.

    Science.gov (United States)

    Frankowski, Marcin; Zioła-Frankowska, Anetta; Kurzyca, Iwona; Novotný, Karel; Vaculovič, Tomas; Kanický, Viktor; Siepak, Marcin; Siepak, Jerzy

    2011-11-01

    The paper presents the results of aluminium determinations in ground water samples of the Miocene aquifer from the area of the city of Poznań (Poland). The determined aluminium content amounted from aluminium determinations were performed using three analytical techniques: graphite furnace atomic absorption spectrometry (GF-AAS), inductively coupled plasma atomic emission spectrometry (ICP-AES) and inductively coupled plasma mass spectrometry (ICP-MS). The results of aluminium determinations in groundwater samples for particular analytical techniques were compared. The results were used to identify the ascent of ground water from the Mesozoic aquifer to the Miocene aquifer in the area of the fault graben. Using the Mineql+ program, the modelling of the occurrence of aluminium and the following aluminium complexes: hydroxy, with fluorides and sulphates was performed. The paper presents the results of aluminium determinations in ground water using different analytical techniques as well as the chemical modelling in the Mineql+ program, which was performed for the first time and which enabled the identification of aluminium complexes in the investigated samples. The study confirms the occurrence of aluminium hydroxy complexes and aluminium fluoride complexes in the analysed groundwater samples. Despite the dominance of sulphates and organic matter in the sample, major participation of the complexes with these ligands was not stated based on the modelling.

  19. Energy efficiency improvement and GHG abatement in the global production of primary aluminium

    NARCIS (Netherlands)

    Kermeli, Katerina; Ter Weer, Peter Hans; Crijns - Graus, Wina; Worrell, Ernst

    2015-01-01

    Primary aluminium production is a highly energy-intensive and greenhouse gas (GHG)-emitting process responsible for about 1 % of global GHG emissions. In 2009, the two most energy-intensive processes in primary aluminium production, alumina refining and aluminium smelting consumed 3.1 EJ, of which 2

  20. The Prospect of China’s Alumin-ium Extrusion Product Market

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>China’s aluminium extrusion industry can be dated back to the 1950s-70s,when the North- east 101 Plant was established in 1956,the Northwest Aluminium and Southwest Alumin- ium were completed and put into operation in 1968-1969.The three plants’ extrusion assem- bly lines were designed to produce aluminium

  1. The Net Exporting Trends Remains for China’s Aluminium Products

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>The oversupply of China’s raw aluminium has caused the continuing net exporting for China’s aluminium products.As the situation is wors- ened due to the growing raw aluminium pro- duction and curbed demand,it is estimated that the continuation of net exporting of China’s

  2. Light-weight aluminium bridges and bridge decks. An overview of recent applications

    NARCIS (Netherlands)

    Maljaars, J.; Soetens, F.; Kluyver, D. de

    2008-01-01

    The last decades have shown a large increase in the application of aluminium alloys for light-weight bridges. For bridge construction, aluminium alloys have some specific advantages, but also some points of attention. This paper deals with some recent projects of aluminium bridges, and for these pro

  3. IEC 61267: Feasibility of type 1100 aluminium and a copper/aluminium combination for RQA beam qualities.

    Science.gov (United States)

    Leong, David L; Rainford, Louise; Zhao, Wei; Brennan, Patrick C

    2016-01-01

    In the course of performance acceptance testing, benchmarking or quality control of X-ray imaging systems, it is sometimes necessary to harden the X-ray beam spectrum. IEC 61267 specifies materials and methods to accomplish beam hardening and, unfortunately, requires the use of 99.9% pure aluminium (Alloy 1190) for the RQA beam quality, which is expensive and difficult to obtain. Less expensive and more readily available filters, such as Alloy 1100 (99.0% pure) aluminium and copper/aluminium combinations, have been used clinically to produce RQA series without rigorous scientific investigation to support their use. In this paper, simulation and experimental methods are developed to determine the differences in beam quality using Alloy 1190 and Alloy 1100. Additional simulation investigated copper/aluminium combinations to produce RQA5 and outputs from this simulation are verified with laboratory tests using different filter samples. The results of the study demonstrate that although Alloy 1100 produces a harder beam spectrum compared to Alloy 1190, it is a reasonable substitute. A combination filter of 0.5 mm copper and 2 mm aluminium produced a spectrum closer to that of Alloy 1190 than Alloy 1100 with the added benefits of lower exposures and lower batch variability.

  4. TRANSPARENT CONDUCTING OXIDE SYNTHESIS OF ALUMINIUM DOPED ZINC OXIDES BY CHEMICAL COPRECIPITATION

    Directory of Open Access Journals (Sweden)

    Silvia Maioco

    2013-03-01

    Full Text Available Aluminium doped zinc oxides (AZO are promising replacements for tin doped indium oxides (ITO but thin films show a wide range of physical properties strongly dependent on deposition process conditions. Submicrometric 1% aluminum doped zinc oxide ceramics (AZO are examined, prepared by coprecipitation, from Zn(NO32 and Al(NO33 aqueous solutions, sintered at 1200°C and subsequently annealed in 10-16 atm controlled oxygen fugacity atmospheres, at 1000°C. Electrical resistivity diminishes by two orders of magnitude after two hours of annealing and the Seebeck coefficient gradually changes from -140 to -50 µV/K within 8 h. It is concluded that increased mobility is dominant over the increased carrier density, induced by changes in metal-oxygen stoichiometry

  5. Langmuir-Blodgett Films from Schiff Base Aluminium ( Ⅲ ) Complex

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The characteristics of the LB films of Schiff base aluminium( Ⅲ ), tris(2-hydroxy-5-nitro N-dodecyl-benzylideneaminato) aluminium ( Ⅲ ) [Al (TA 12) 3], were studied. The surface pres sure-area(r-A) isotherm of Al(TA12)3 in the pure water subphase was investigated. The molec ular area, 0.48 nm2, is one-third of the expected value that indicates the formation of an aggre gate. The Langmuir-Blodgett (LB) films of Al(TA12) 3 were transferred and characterized. The UV-Vis spectra and the AFM image both confirmed that the J-aggregates formed. The polarized UV-Vis spectra indicated that the complex plane had to be oriented with an angle of about 30° to the substrate surface. The IR spectra suggested that the complexation took place between aluminium ions and the oxygen atoms of the ligand rather than the nitrogen atom.

  6. Reflection of infrared radiation from thin aluminium layers

    CERN Document Server

    Calatroni, Sergio

    2001-01-01

    The thermal shielding of the LHC magnets cryostats will make use of Multi-Layer Insulation. This is a sandwich of several Mylar (polyester) foils 6 µm thick coated with a thin film of aluminium, having a thickness of some 30 nm. The thickness of the aluminium film must be kept at a minimum to minimise lateral thermal conduction. The outer layer of this sandwich stays at a temperature of 20 K or below, and receives IR radiation from surfaces at 77 K (wavelength of 37.6 µm at the peak of blackbody radiation), which should be reflected with the highest efficiency. The minimum thickness for the aluminium layer to avoid transmission of the radiation can be calculated by making use of the skin effect theory, taking into account the changes in electrical properties that are due to the extremely low thickness of the film.

  7. Aluminium supplier selection for the automotive parts manufacturer

    Directory of Open Access Journals (Sweden)

    M. Cieśla

    2016-04-01

    Full Text Available This paper presents a methodology for selection of the optimal sources of supply, which is also known as the problem of supplier selection. Theoretical considerations are expanded with research related to aluminium supplier selection for a hypothetical manufacturer of aluminium parts for transportation equipment located in Poland. Evaluation of five suppliers of aluminium from Poland, Germany and Slovenia has been conducted using a weighted scoring method, a strengths and weaknesses method and a graphical method. Choosing the best offer and prioritizing suppliers allows not only the most rational decision in the field of supply logistics to be taken but also the quality of service in the metallurgical industry to be improved.

  8. Application of Anodization Process for Cast Aluminium Surface Properties Enhancement

    Directory of Open Access Journals (Sweden)

    Włodarczyk-Fligier A.

    2016-09-01

    Full Text Available An huge interest is observed in last years in metal matrix composite, mostly light metal based, which have found their applications in many industry branches, among others in the aircraft industry, automotive-, and armaments ones, as well as in electrical engineering and electronics, where one of the most important issue is related to the corrosion resistance, especially on the surface layer of the used aluminium alloys. This elaboration presents the influence of ceramic phase on the corrosion resistance, quality of the surface layer its thickness and structure of an anodic layer formed on aluminium alloys. As test materials it was applied the aluminium alloys Al-Si-Cu and Al-Cu-Mg, for which heat treatment processes and corrosion tests were carried out. It was presented herein grindability test results and metallographic examination, as well. Hardness of the treated alloys with those ones subjected to corrosion process were compared.

  9. Effect of Heat Treatment on Microstructural Changes in Aluminium Bronze

    Directory of Open Access Journals (Sweden)

    Hájek J.

    2016-09-01

    Full Text Available This paper attempts to summarise the microstructural changes which take place in aluminium bronzes during heat treatment. Another objective of this study was to map the potential of a certain type of aluminium bronzes for undergoing martensitic transformation. The methods, which were chosen for assessing the results of heat treatment with regard to their availability, included measurement of hardness and observation of microstructure using light and scanning electron microscopy, Additional tools for evaluation of microstructure comprised measurement of microhardness and chemical analysis by EDS. An important part of the experiment is observation of microstructural changes in the Jominy bar during the end-quench test. Upon completing experiments of this kind, one can define the heat treatment conditions necessary for obtaining optimum properties. In addition, the paper presents important findings on how to improve the corrosion resistance of aluminium bronzes by special heat treatment sequences.

  10. [Photophysical properties and photodynamic activity of nanostructured aluminium phthalocyanines].

    Science.gov (United States)

    Udartseva, O O; Lobanov, A V; Andeeva, E R; Dmitrieva, G S; Mel'nikov, M Ia; Buravkova, L B

    2014-01-01

    We developed water-soluble supramolecular complexes of aluminium phthalocyanine based on mesoporous silica nanoparticles and polyvinylpirrolidone containing rare photoactive nanoaggregates. Radiative lifetimes, extinction coefficients and energy of electronic transitions of isolated and associated metal phthalocyanine complexes were calculated. Nontoxic concentrations of synthesized nanocomposite photosensibilizers were in vitro determined. In present study we compared photodynamic treatment efficacy using different modifications of aluminium phthalocyanine (Photosens®, AlPc-nSiO2 and AlPc-PVP). Mesenchymal stromal cells were used as a model for photodynamic treatment. Intracellular accumulation of aluminium phthalocyanine based on mesoporous silica nanoparticles AlPc-nSiO2 was the most efficient. Illumination of phthalocyanine-loaded cells led to reactive oxygen species generation and subsequent apoptotic cell death. Silica nanoparticles provided a significant decrease of effective phthalocyanine concentration and enhanced cytotoxicity of photodynamic treatment.

  11. The immunobiology of aluminium adjuvants: how do they really work?

    Science.gov (United States)

    Exley, Christopher; Siesjö, Peter; Eriksson, Håkan

    2010-03-01

    Aluminium adjuvants potentiate the immune response, thereby ensuring the potency and efficacy of typically sparingly available antigen. Their concomitant critical importance in mass vaccination programmes may have prompted recent intense interest in understanding how they work and their safety. Progress in these areas is stymied, however, by a lack of accessible knowledge pertaining to the bioinorganic chemistry of aluminium adjuvants, and, consequently, the inappropriate application and interpretation of experimental models of their mode of action. The objective herein is, therefore, to identify the many ways that aluminium chemistry contributes to the wide and versatile armoury of its adjuvants, such that future research might be guided towards a fuller understanding of their role in human vaccinations.

  12. Aluminium in parenteral nutrition: a systematic review.

    Science.gov (United States)

    Hernández-Sánchez, A; Tejada-González, P; Arteta-Jiménez, M

    2013-03-01

    Aluminium (Al) toxicity problem in parenteral nutrition solutions (PNS) is decades old and is still unresolved. The aim of this review is to gather updated information about this matter, regarding legislation, manifestations, diagnostics and treatment, patient population at risk and the actions to be taken to limit its accumulation. A structured search using MeSH vocabulary and Title/Abstract searches was conducted in PubMed (http://www.pubmed.gov) up to November 2012. Al is ubiquitous, facilitating its potential for exposure. Nevertheless, humans have several mechanisms to prevent significant absorption and to aid its elimination; therefore, the vast majority of the population is not at risk for Al toxicity. However, when protective gastrointestinal mechanisms are bypassed (for example, parenteral fluids), renal function is impaired (for example, adult patients with renal compromise and neonates) or exposure is high (for example, long-term PNS), Al is prone to accumulate in the body, including manifestations such as impaired neurological development, Alzheimer's disease, metabolic bone disease, dyslipemia and even genotoxic activity. A high Al content in PNS is largely the result of three parenteral nutrient additives: calcium gluconate, inorganic phosphates and cysteine hydrochloride. Despite the legislative efforts, some factors make difficult to comply with the rule and, therefore, to limit the Al toxicity. Unfortunately, manufacturers have not universally changed their processes to obtain a lower Al content of parenteral drug products (PDP). In addition, the imprecise information provided by PDP labels and the high lot-to-lot variation make the prediction of Al content rather inaccurate.

  13. PEMBINAAN PENGERAJIN BOKOR ALUMINIUM DI DESA MENYALI

    Directory of Open Access Journals (Sweden)

    I NYOMAN GDE ANTARA, dkk.

    2014-04-01

    Full Text Available Alluminium bowl craft industrial center is located in Menyali village Sawan district Buleleng regency of Bali province. In this business development, they faced some problems such as increasingly expensive alluminium plate raw materials, decreasing selling product prices due to competition among craftsmen, difficulty in extending the marketing, lack of capital, lack of knowledge in business management, and lack of technical capacity and production innovation. Currently the organization has been formed aluminum bowl craftsmen groups, they are “Sumber Urip” and “Sumur Jaya”. This organization is still limited to tradisional associations such as a community organization, has not led to organize in a micro-enterprise or cooperation. Their organization management should not be arranged. Therefore, they need helps from the government and other institutions to build this bowl craftsmen in developing their businesses through a group of micro-enterprises or cooperations. Wishly, with formal business entity that would facilitate access to a variety of coaching and help governments andother institutions. From the SWOT analysis, it is found some problems and solutions that should be done. Alluminium bowl craftsmen groups, named “Sumber Urip” and “Sumur Jaya” is not in the form of business entity or cooperation yet, so that the results of coaching have agreed to form a cooperation. Venture capital assistance for the development and production are still needed and to be an absolute given, but a way to market more absolute yield is given, through participation in various events exhibition to introduce the product is expected to expandits market share up to overseas or exports. In the production process it has been introduced that is appropriate technology for instant a rolling tool to make a wiring groove on the outside of the bowl, so that it will simplify and speed up the process, especially by aged mothers.Keywords: aluminium bowl, Menyali

  14. Aluminium Price Looks Down Due To Increased Capacities

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>Speaking at a recent forum on China’S alumin- ium industry,Wen Xianjun,director of the aluminium branch under China Nonferrous Metals Industry Association,said that the alu- minium price in 2007 looks going downward due to the production capacity expansion out of the high market price last year.He estimates that the downward development of the alumin- ium price in China will be more obvious than that in the rest part of the world.He predicts that in 2007 the average aluminium price in

  15. Washery tailings from coal preparation used as aluminium feedstock

    Energy Technology Data Exchange (ETDEWEB)

    Kuehn, L.; Schieder, T.; Belsky, M.; Lotze, J.; Winkhaus, G.

    1982-06-01

    Kaolinite clays and washery tailings of coal mines are the major feedstocks of the West German aluminium industry. Statistics are given in order to assess the amount of washery tailings available and their suitability as feedstocks for aluminium production. The chemical and mineralogical composition are similar for washery tailings from different mines; accordingly, also their behaviour regarding decomposition by acids will be almost identical. Al/sub 2/O/sub 3/ extraction yields are satisfactory with strongly precalcinated material using concentrated sulphuric acid or azeotropic hydrochloric acid - in the latter case, however, only if fluoride is added to the acid.

  16. Power quality results in energy efficient aluminium smelter operation

    Energy Technology Data Exchange (ETDEWEB)

    Wiestner, Max

    2010-09-15

    New aluminium smelters consume up to 2400MW of electrical energy making the energy efficiency aspect most important. Power quality, optimised power conversion systems and well engineered power plant interfaces are essential for highest energy efficiency. An early optimisation of the power system design will reduce the capital investment cost for the power plant and smelter substation as well as results in most energy efficient aluminium production. This paper describes and intends to discuss the power quality improvement concepts and designs as well as energy cost reduction opportunities which a high power quality system can achieve.

  17. Transmittance jump in a thin aluminium layer during laser ablation

    Energy Technology Data Exchange (ETDEWEB)

    Bykovsky, N E; Senatsky, Yu V [P N Lebedev Physics Institute, Russian Academy of Sciences, Moscow (Russian Federation); Pershin, S M; Samokhin, A A [A M Prokhorov General Physics Institute, Russian Academy of Sciences, Moscow (Russian Federation)

    2016-02-28

    A jump in the transmittance (from ∼0.1% to ∼50% for ∼1 ns) of an optical gate on a Mylar film (a thin aluminium layer on a Lavsan substrate) irradiated by nanosecond (10{sup -7} – 10{sup -8} s) pulses of a neodymium laser with an intensity up to 0.1 GW cm{sup -2} has been recorded. The mechanism of a fast (10{sup -10} – 10{sup -11} s) increase in the transmittance of the aluminium layer upon its overheating (without boiling) to the metal – insulator phase-transition temperature is discussed. (interaction of laser radiation with matter. laser plasma)

  18. Silver coated aluminium microrods as highly colloidal stable SERS platforms.

    Science.gov (United States)

    Pazos-Perez, Nicolas; Borke, Tina; Andreeva, Daria V; Alvarez-Puebla, Ramon A

    2011-08-01

    We report on the fabrication of a novel material with the ability to remain in solution even under the very demanding conditions required for structural and dynamic characterization of biomacromolecule assays. This stability is provided by the increase in surface area of a low density material (aluminium) natively coated with a very hydrophilic surface composed of aluminium oxide (Al(2)O(3)) and metallic silver nanoparticles. Additionally, due to the dense collection of active hot spots on their surface, this material offers higher levels of SERS intensity as compared with the same free and aggregated silver nanoparticles.

  19. Aluminium, beta-amyloid and non-enzymatic glycosylation.

    Science.gov (United States)

    Exley, C; Schley, L; Murray, S; Hackney, C M; Birchall, J D

    1995-05-08

    The non-enzymatic glycosylation of beta-amyloid is implicated in the aetiology of Alzheimer's disease. However, controversy surrounds the nature of any involvement and a potential mechanism has not been fully elucidated. We present evidence of an aluminium-induced aggregation of the A beta P(25-35) peptide and speculate that the mechanism of formation of our ordered beta-amyloid aggregates might involve non-enzymatic glycosylation and/or site-specific crosslinking of beta-amyloid fibrils by atomic aluminium.

  20. Accumulation of Aluminium and Physiological Status of Tree Foliage in the Vicinity of a Large Aluminium Smelter

    Directory of Open Access Journals (Sweden)

    E. D. Wannaz

    2012-01-01

    Full Text Available A pollution gradient was observed in tree foliage sampled in the vicinity of a large aluminium production facility in Patagonia (Argentina. Leaves of Eucalyptus rostrata, and Populus hybridus and different needle ages of Pinus spec. were collected and concentrations of aluminium (Al and sulphur (S as well as physiological parameters (chlorophyll and lipid oxidation products were analyzed. Al and S concentrations indicate a steep pollution gradient in the study showing a relationship with the physiological parameters in particular membrane lipid oxidation products. The present study confirms that aluminium smelting results in high Al and sulphur deposition in the study area, and therefore further studies should be carried out taking into account potentially adverse effects of these compounds on human and ecosystem health.

  1. Gas accumulation at grain boundaries during 800 MeV proton irradiation of aluminium and aluminium-alloys

    DEFF Research Database (Denmark)

    Singh, Bachu Narain; Horsewell, Andy; Sommer, W. F.;

    1986-01-01

    Samples of pure aluminium (99.9999%) and commercial Al-2.7%Mg(AlMg3) and Al-1.1%Mg-0.5%Si(Al6061) alloys were irradiated with 800 MeV protons at the Los Alamos Meson Physics Facility (LAMPF) at a temperature between 40-100°C to a maximum dose of 0.2 dpa. Transmission electron microscopy (TEM......) showed a complete absence of voids or bubbles in the grain interiors of the aluminium and the aluminium-alloys. Bubbles were clearly visible by TEM at grain boundaries in pure Al and the AlMg3 alloy; but bubbles were not visible in the Al6061 alloy. The bubble density in the AlMg3 alloy was considerably...

  2. Carbon treated commercial aluminium alloys as anodes for aluminium-air batteries in sodium chloride electrolyte

    Science.gov (United States)

    Pino, M.; Herranz, D.; Chacón, J.; Fatás, E.; Ocón, P.

    2016-09-01

    An easy treatment based in carbon layer deposition into aluminium alloys is presented to enhance the performance of Al-air primary batteries with neutral pH electrolyte. The jellification of aluminate in the anode surface is described and avoided by the carbon covering. Treated commercial Al alloys namely Al1085 and Al7475 are tested as anodes achieving specific capacities above 1.2 Ah g-1vs 0.5 Ah g-1 without carbon covering. The influence of the binder proportion in the treatment as well as different carbonaceous materials, Carbon Black, Graphene and Pyrolytic Graphite are evaluated as candidates for the covering. Current densities of 1-10 mA cm-2 are measured and the influence of the alloy explored. A final battery design of 4 cells in series is presented for discharges with a voltage plateau of 2 V and 1 Wh g-1 energy density.

  3. New Investment Rush Brings up Concern for China’s Aluminium Industry

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正> Although the blind construction of the electro-lytic aluminium industry has been restricted inChina this year,an investment rush in aluminaand aluminium processing has started,whichhas brought up new concern for the industry.Whether this will follow the route of the much-heated electrolytic aluminium industry remainsa question to be answered.According to someindustry analysts,under the pressure of themacro control measures of the State on theelectrolytic aluminium industry expansion,some producers of aluminium have shiftedtheir interests to the upper and lower fields soas to raise their competitiveness over the mar-

  4. Mechanochemical route to the synthesis of nanostructured Aluminium nitride.

    Science.gov (United States)

    Rounaghi, S A; Eshghi, H; Scudino, S; Vyalikh, A; Vanpoucke, D E P; Gruner, W; Oswald, S; Kiani Rashid, A R; Samadi Khoshkhoo, M; Scheler, U; Eckert, J

    2016-09-21

    Hexagonal Aluminium nitride (h-AlN) is an important wide-bandgap semiconductor material which is conventionally fabricated by high temperature carbothermal reduction of alumina under toxic ammonia atmosphere. Here we report a simple, low cost and potentially scalable mechanochemical procedure for the green synthesis of nanostructured h-AlN from a powder mixture of Aluminium and melamine precursors. A combination of experimental and theoretical techniques has been employed to provide comprehensive mechanistic insights on the reactivity of melamine, solid state metal-organic interactions and the structural transformation of Al to h-AlN under non-equilibrium ball milling conditions. The results reveal that melamine is adsorbed through the amine groups on the Aluminium surface due to the long-range van der Waals forces. The high energy provided by milling leads to the deammoniation of melamine at the initial stages followed by the polymerization and formation of a carbon nitride network, by the decomposition of the amine groups and, finally, by the subsequent diffusion of nitrogen into the Aluminium structure to form h-AlN.

  5. Electrochemical Characterisation of Filiform Corrosion on Aluminium Rolled Products

    NARCIS (Netherlands)

    Huisert, M.

    2001-01-01

    When aluminium is protected by an organic coating a special form of corrosion can occur underneath the organic coating; filiform corrosion. This form of corrosion manifests itself as threadlike filaments under the coating, it causes local delamination of the coating and the coating cannot protect th

  6. Modelling aluminium wire bond reliability in high power OMP devices

    NARCIS (Netherlands)

    Kregting, R.; Yuan, C.A.; Xiao, A.; Bruijn, F. de

    2011-01-01

    In a RF power application such as the OMP, the wires are subjected to high current (because of the high power) and high temperature (because of the heat from IC and joule-heating from the wire itself). Moreover, the wire shape is essential to the RF performance. Hence, the aluminium wire is preferre

  7. Highly sensitive thermoluminescent carbon doped nanoporous aluminium oxide detectors.

    Science.gov (United States)

    de Azevedo, W M; de Oliveira, G B; da Silva, E F; Khoury, H J; Oliveira de Jesus, E F

    2006-01-01

    In this work we present the synthesis, characterisation and the thermoluminescence (TL) response of nanoporous carbon doped aluminium oxide Al2O3:C produced by anodic oxidation of aluminium in organic and inorganic solvents. The X-ray and scanning electron microscopy (SEM) measurements reveal that the synthesised samples are amorphous and present highly ordered structures with uniform pore distribution with diameter of the order 50 nm. The photoluminescence and spectroscopic analysis in the visible and infrared regions show that the luminescence properties presented by the samples prepared in organic acid are due to carboxylate species, incorporated in anodic alumina films during the synthesis process. After an annealing treatment, part of the incorporated species decomposes and is incorporated into the structure of the aluminium oxide yielding a highly thermoluminescent detector (TL) . The results for X-ray irradiation in the range from 21 to 80 keV indicate a linear TL response with the dose in the range from 5 mGy to 1 Gy, suggesting that nanoporous aluminium oxide produced in the present route of synthesis is a suitable detector for radiation measurements.

  8. Superhydrophobic coatings for aluminium surfaces synthesized by chemical etching process

    Directory of Open Access Journals (Sweden)

    Priya Varshney

    2016-10-01

    Full Text Available In this paper, the superhydrophobic coatings on aluminium surfaces were prepared by two-step (chemical etching followed by coating and one-step (chemical etching and coating in a single step processes using potassium hydroxide and lauric acid. Besides, surface immersion time in solutions was varied in both processes. Wettability and surface morphologies of treated aluminium surfaces were characterized using contact angle measurement technique and scanning electron microscopy, respectively. Microstructures are formed on the treated aluminium surfaces which lead to increase in contact angle of the surface (>150°. Also on increasing immersion time, contact angle further increases due to increase in size and depth of microstructures. Additionally, these superhydrophobic coatings show excellent self-cleaning and corrosion-resistant behavior. Water jet impact, floatation on water surface, and low temperature condensation tests assert the excellent water-repellent nature of coatings. Further, coatings are to be found mechanically, thermally, and ultraviolet stable. Along with, these coatings are found to be excellent regeneration ability as verified experimentally. Although aforesaid both processes generate durable and regenerable superhydrophobic aluminium surfaces with excellent self-cleaning, corrosion-resistant, and water-repellent characteristics, but one-step process is proved more efficient and less time consuming than two-step process and promises to produce superhydrophobic coatings for industrial applications.

  9. Energy situation and competitiveness of the aluminium industry

    Energy Technology Data Exchange (ETDEWEB)

    Legler, H.

    1984-04-01

    The west german aluminium industry has heavily run into the wake of price competition; the high energy price level in the FRG in international comparison carries heavy weight. The technological potential of energy saving is limited. The electricity prices to aluminium smelters are politically determined: They depend on the importance which economic policy attaches to the competitiveness of electricity intensive industries. Since the end of the seventies the tendency of improved results in international trade has been broken. Other important supply factors are not advantageous. Compared to a lot of other economies the west german aluminium industry invests too little in research and development. Although the share of unskilled workers is high, it does not seem impossible to close the technological gap. - The environmental protection expenditures are considerable. Energy is not the only problem of the aluminium industry Electricity price subsidies do not produce any effect in the long run. The prospects of cheap electricity in comparison with other nations are not bright. Without a doubt the considerable regional and sectoral discriminations in setting electricity prices could be - and have to be - removed. Then the competition within FRG between electricity users would be less heavily distorted. The electricity price level will tend to drop significantly in an economy which applies more competitive pressure to power companies than today.

  10. Zonal distribution of dissolved aluminium in the Mediterranean Sea

    NARCIS (Netherlands)

    Rolison, J. M.; Middag, R.; Stirling, C. H.; Rijkenberg, M. J. A.; de Baar, H. J. W.

    2015-01-01

    Dissolved aluminium (Al) is an important tracer of atmospheric dust input to the oceans. The GEOTRACES expedition to the highly dust impacted Mediterranean Sea afforded the opportunity to study the distribution of dissolved Al in the Mediterranean Sea in detail. Interestingly, the elevated concentra

  11. Establishment of integrated information displays in aluminium surfaces using nanomanufacturing

    DEFF Research Database (Denmark)

    Prichystal, Jan; Hansen, Hans Nørgaard; Bladt, Henrik H.

    2006-01-01

    in aluminium concerns the processing of a metal workpiece in such a way that microcavities are formed from the backside of the workpiece. The microcavities must not penetrate the metal front side, but an ultra-thin layer of metal is left. It is possible to shine light through this layer. By ordering...

  12. Porphyry copper enrichment linked to excess aluminium in plagioclase

    Science.gov (United States)

    Williamson, B. J.; Herrington, R. J.; Morris, A.

    2016-03-01

    Porphyry copper deposits provide around 75%, 50% and 20% of world copper, molybdenum and gold, respectively. The deposits are mainly centred on calc-alkaline porphyry magmatic systems in subduction zone settings. Although calc-alkaline magmas are relatively common, large porphyry copper deposits are extremely rare and increasingly difficult to discover. Here, we compile existing geochemical data for magmatic plagioclase, a dominant mineral in calc-alkaline rocks, from fertile (porphyry-associated) and barren magmatic systems worldwide, barren examples having no associated porphyry deposit. We show that plagioclase from fertile systems is distinct in containing `excess’ aluminium. This signature is clearly demonstrated in a case study carried out on plagioclase from the fertile La Paloma and Los Sulfatos copper porphyry systems in Chile. Further, the presence of concentric zones of high excess aluminium suggests its incorporation as a result of magmatic processes. As excess aluminium has been linked to high melt water contents, the concentric zones may record injections of hydrous fluid or fluid-rich melts into the sub-porphyry magma chamber. We propose that excess aluminium may exclude copper from plagioclase, so enriching the remaining melts. Furthermore, this chemical signature can be used as an exploration indicator for copper porphyry deposits.

  13. Cavitation-aided grain refinement in aluminium alloys

    NARCIS (Netherlands)

    Atamanenko, T.V.

    2010-01-01

    This thesis deals with grain refinement under the influence of ultrasonic-driven cavitation in aluminium casting processes. Three major goals of this research were: (1) to identify the mechanism of the cavitation-aided grain refinement at different stages of solidification; (2) to reveal the conditi

  14. Silicon Carbide Tiles for Sidewall Lining in Aluminium Electrolysis Cells

    Institute of Scientific and Technical Information of China (English)

    RUANBo; ZHAOJunguo; 等

    1999-01-01

    The paper introduces the nitride bonded silicon carbide used for sidewall lining in aluminium eletrolysis cells ,including technical process,main properties and application results.Comparison tests on various physical properties of silicon carbide products made by LIRR and other producers worldwide have also been conducted in an independent laboratory.

  15. Treatment of dairy effluents by electrocoagulation using aluminium electrodes.

    Science.gov (United States)

    Tchamango, Serge; Nanseu-Njiki, Charles P; Ngameni, Emmanuel; Hadjiev, Dimiter; Darchen, André

    2010-01-15

    This work sets out to examine the efficiency of an electrolytic treatment: electrocoagulation, applied to dairy effluents. The experiments were carried out using a soluble aluminium anode on artificial wastewater derived from solutions of milk powder. The flocks generated during this treatment were separated by filtration. The analysis of the filtrates showed that the chemical oxygen demand (COD) was reduced by up to 61% while the removal of phosphorus, nitrogen contents, and turbidity were 89, 81 and 100%, respectively. An analogous treatment applied to phosphate and lactose solutions revealed that lactose was not eliminated, a fact that could account for the rather poor lowering of the COD. Compared to the chemical coagulation treatment with aluminium sulphate, the efficiency of the electrocoagulation technique was almost identical. However the wastewaters treated by electrocoagulation differed by the fact that they exhibited a lower conductivity and a neutral pH value (by contrast to the acid nature of the solution treated by the chemical coagulation). This result (low conductivity, neutral pH) tends to show that it may be possible to recycle the treated water for some industrial uses. Moreover, the electrocoagulation process uses fewer reagents: the mass of the aluminium anode dissolved during the treatment is lower compared to the quantity of the aluminium salt used in chemical coagulation. These two observations clearly show that the electrocoagulation technique is more performing.

  16. Reactive ion beam figuring of optical aluminium surfaces

    Science.gov (United States)

    Bauer, Jens; Frost, Frank; Arnold, Thomas

    2017-03-01

    Ultra-smooth and arbitrarily shaped reflective optics are necessary for further progress in EUV/XUV lithography, x-ray and synchrotron technology. As one of the most important technological mirror optic materials, aluminium behaves in a rather difficult way in ultra-precision machining with such standard techniques as diamond-turning and subsequent ion beam figuring (IBF). In particular, in the latter, a strong surface roughening is obtained. Hence, up to now it has not been possible to attain the surface qualities required for UV or just visible spectral range applications. To overcome the limitations mainly caused by the aluminium alloy structural and compositional conditions, a reactive ion beam machining process using oxygen process gas is evaluated. To clarify the principle differences in the effect of oxygen gas contrary to oxygen ions on aluminium surface machining, we firstly focus on chemical-assisted ion beam etching (CAIBE) and reactive ion beam etching (RIBE) experiments in a phenomenological manner. Then, the optimum process route will be explored within a more quantitative analysis applying the concept of power spectral density (PSD) for a sophisticated treatment of the surface topography. Eventually, the surface composition is examined by means of dynamic secondary ion mass spectrometry (SIMS) suggesting a characteristic model scheme for the chemical modification of the aluminium surface during oxygen ion beam machining. Monte Carlo simulations were applied to achieve a more detailed process conception.

  17. Local electrochemical behaviour of 7xxx aluminium alloys

    NARCIS (Netherlands)

    Andreatta, F.

    2004-01-01

    Aluminium alloys of the 7xxx series (Al-Zn-Mg-Cu) are susceptible to localized types of corrosion like pitting, intergranular corrosion and exfoliation corrosion. This represents a limitation for the application of these alloys in the aerospace components because localized corrosion might have a neg

  18. Molecular Characterization of Aluminium (aluminum) Tolerance in Rye

    Science.gov (United States)

    Aluminium (Al) toxicity, affecting around half of the world’s arable land, severely hinders the ability of crop plants to utilize moisture and nutrients by restricting root growth and function. Among the cultivated cereals, rye is the most Al-tolerant and represents an important potential source of ...

  19. Aluminium in food and daily dietary intake estimate in Greece.

    Science.gov (United States)

    Bratakos, Sotirios M; Lazou, Andriana E; Bratakos, Michael S; Lazos, Evangelos S

    2012-01-01

    Aluminium content of foods, as well as dietary aluminium intake of the Greek adult population, was determined using graphite furnace atomic absorption spectroscopy after microwave sample digestion and food consumption data. Al content ranged from 0.02 to 741.2 mg kg⁻¹, with spices, high-spice foods, cereal products, vegetables and pulses found to be high in Al. Differences in aluminium content were found between different food classes from Greece and those from some other countries. Aluminium intake of Greeks is 3.7 mg/day based on DAFNE Food Availability Databank, which uses data from the Household Budget Surveys. On the other hand, according to the per capita food consumption data collected by both national and international organisations, Al intake is 6.4 mg day⁻¹. Greek adult population has an Al intake lower than the Provisional Tolerable Weekly Intake of 7 mg kg⁻¹ body weight established by EFSA. Cereals and vegetables are the main Al contributors, providing 72.4% of daily intake.

  20. Mechanochemical route to the synthesis of nanostructured Aluminium nitride

    Science.gov (United States)

    Rounaghi, S. A.; Eshghi, H.; Scudino, S.; Vyalikh, A.; Vanpoucke, D. E. P.; Gruner, W.; Oswald, S.; Kiani Rashid, A. R.; Samadi Khoshkhoo, M.; Scheler, U.; Eckert, J.

    2016-09-01

    Hexagonal Aluminium nitride (h-AlN) is an important wide-bandgap semiconductor material which is conventionally fabricated by high temperature carbothermal reduction of alumina under toxic ammonia atmosphere. Here we report a simple, low cost and potentially scalable mechanochemical procedure for the green synthesis of nanostructured h-AlN from a powder mixture of Aluminium and melamine precursors. A combination of experimental and theoretical techniques has been employed to provide comprehensive mechanistic insights on the reactivity of melamine, solid state metal-organic interactions and the structural transformation of Al to h-AlN under non-equilibrium ball milling conditions. The results reveal that melamine is adsorbed through the amine groups on the Aluminium surface due to the long-range van der Waals forces. The high energy provided by milling leads to the deammoniation of melamine at the initial stages followed by the polymerization and formation of a carbon nitride network, by the decomposition of the amine groups and, finally, by the subsequent diffusion of nitrogen into the Aluminium structure to form h-AlN.

  1. Examples on cold forged aluminium components in automotive industry

    DEFF Research Database (Denmark)

    Bay, Niels; Kolsgaard, A.

    2000-01-01

    The present paper describes the possibilites of applying cold forging for manufacturing of light weight components in aluminium. A short description of the basic cold forming processes forms the basis for describing the great variety in design of cold forged components. Examples are mainly taken ...

  2. Diamond turning and polishing tests on new RSP aluminium alloys

    NARCIS (Netherlands)

    Horst, R. ter; Haan, M. de; Gubbels, G.P.H.; Senden, R.; Venrooy, B.W.H. van; Hoogstrate, A.M.

    2012-01-01

    For years now conventional aluminium 6061 T6 has widely been used for mirrors in astronomical instruments, being diamond turned or since a few years also being optically polished. This allows the development of optical systems that can be tested and operated at any temperature, without being affecte

  3. Effects of Aluminium in Forest. Results of a pilot experiment

    Energy Technology Data Exchange (ETDEWEB)

    Mulder, J.; Wit, H. de; Nygaard, P.H.

    1996-01-01

    This conference paper deals with an Norwegian pilot project which started in 1995 and finishing early 1999, investigates the solubility and phyto-toxicity of aluminium (Al) in mature forest ecosystems. The project consists of three major parts, including field manipulation study of Norwegian spruce stands, laboratory experiments and modelling Al chemistry in the root zone. 15 refs.

  4. Development of an aluminium stabilized reinforced superconducting conductor

    Energy Technology Data Exchange (ETDEWEB)

    Fritz, D. [PTR Praezisionstechnik GmbH Maintal (Germany); Horvath, I.L. [Swiss Federal Inst. of Tech., Zuerich (Switzerland); Harzenmoser, M.; Neuenschwander, J. [Swiss Federal Labs. for Materials Testing and Research, Duebendorf (Switzerland); Wittgenstein, F. [CERN, Geneva (Switzerland)

    1996-07-01

    For high performance superconducting magnets as used in large detectors for the High Energy Physics or for magnets of magnetic storage devices (SMES) the mechanical stresses on the conductor go beyond the yield stress level of the high purity matrix stabilizer, specially if aluminium is used. Therefore, a novel method is proposed to join high strength aluminium strips to high purity aluminium stabilizer by using the electron beam (EB) welding. The proposed EB-welding, combined with roll-pressing under vacuum, provides the minimum heat input on the conductor in comparison with other welding techniques. This method provides the advantage to allow the production of very long conductor lengths and includes the potentiality of repairing without losing expensive material. As this process has to be adapted to the high purity aluminium on the one side and to the high strength material on the other, the authors started in a first step with investigation and development of the process, using standard laboratory machines together with laboratory-size tooling. In this report the development program is described and first results of the quality control measurements are presented.

  5. Research Regarding Aluminium Eloxation from Phosphoric Acid Electrolyte

    Directory of Open Access Journals (Sweden)

    Cretu Carmen Monica

    2014-06-01

    Full Text Available The study presents the influence of production parameters on the aluminium eloxation from H3PO4 solution. The thickness and aspect of the deposited Al2O3 were determined. The electrodeposition experiments was to determine the optimum conditions for the producing of bright, continuous, adherent and compact Al2O3 layers.

  6. Aluminium in allergen-specific subcutaneous immunotherapy--a German perspective.

    Science.gov (United States)

    Kramer, Matthias F; Heath, Matthew D

    2014-07-16

    We are living in an "aluminium age" with increasing bioavailability of the metal for approximately 125 years, contributing significantly to the aluminium body burden of humans. Over the course of life, aluminium accumulates and is stored predominantly in the lungs, bones, liver, kidneys and brain. The toxicity of aluminium in humans is briefly summarised, highlighting links and possible causal relationships between a high aluminium body burden and a number of neurological disorders and disease states. Aluminium salts have been used as depot-adjuvants successfully in essential prophylactic vaccinations for almost 100 years, with a convincing positive benefit-risk assessment which remains unchanged. However, allergen-specific immunotherapy commonly consists of administering a long-course programme of subcutaneous injections using preparations of relevant allergens. Regulatory authorities currently set aluminium limits for vaccines per dose, rather than per treatment course. Unlike prophylactic vaccinations, numerous injections with higher proportions of aluminium-adjuvant per injection are applied in subcutaneous immunotherapy (SCIT) and will significantly contribute to a higher cumulative life dose of aluminium. While the human body may cope robustly with a daily aluminium overload from the environment, regulatory cumulative threshold values in immunotherapy need further addressing. Based on the current literature, predisposing an individual to an unusually high level of aluminium, such as through subcutaneous immunotherapy, has the potential to form focal accumulations in the body with the propensity to exert forms of toxicity. Particularly in relation to longer-term health effects, the safety of aluminium adjuvants in immunotherapy remains unchallenged by health authorities - evoking the need for more consideration, guidance, and transparency on what is known and not known about its safety in long-course therapy and what measures can be taken to prevent or

  7. Mechanically milled aluminium matrix composites reinforced with halloysite nanotubes

    Directory of Open Access Journals (Sweden)

    L.A. Dobrzański

    2012-12-01

    Full Text Available Purpose: The present work describes fabrication of aluminium AlMg1SiCu matrix composite materials reinforced with halloysite nanotubes by powder metallurgy techniques and hot extrusion.Design/methodology/approach: Mechanical milling, compacting and hot extrusion successively are considering as a method for manufacturing metal composite powders with a controlled fine microstructure and enhanced mechanical properties. It is possible by the repeated welding and fracturing of powders particles mixture in a highly energetic ball mill.Findings: The milling process has a huge influence on the properties of powder materials, changing the spherical morphology of as-received powder during milling process to flattened one due to particle deformation followed by welding and fracturing particles of deformed and hardened enough which allows to receive equiaxial particles morphology again. The investigation shows that so called brittle mineral particles yields to plastic deformation as good as ductile aluminium alloy particles. That indicates that the halloysite powder can play a role of the accelerator during mechanical milling. High energy ball milling as a method of mechanical milling improves the distribution of the halloysite reinforcing particles throughout the aluminium matrix, simultaneously reducing the size of particles. The apparent density changes versus milling time can be used to control the composite powders production by mechanical milling and the presence of halloysite reinforcements particles accelerates the mechanical milling process.Research limitations/implications: Contributes to knowledge about technology, structure and properties of aluminium alloy matrix composite material reinforced with mineral nanoparticles.Practical implications: Conducted research shows that applied technology allows obtaining very good microstructural characteristics.Originality/value: It has been confirmed that halloysite nanotubes can be applied as an effective

  8. Corrosion of aluminium in copper-aluminium couples under a marine environment: Influence of polyaniline deposited onto copper

    Energy Technology Data Exchange (ETDEWEB)

    Vera, Rosa, E-mail: rvera@ucv.c [Instituto de Quimica, Facultad de Ciencias, Pontificia Universidad Catolica de Valparaiso, Avda. Brasil 2950, Casilla 4059, Valparaiso (Chile); Verdugo, Patricia [Departamento de Quimica y Bioquimica, Facultad de Ciencias, Universidad de Valparaiso, Av. Gran Bretana 1111, Valparaiso (Chile); Orellana, Marco; Munoz, Eduardo [Instituto de Quimica, Facultad de Ciencias, Pontificia Universidad Catolica de Valparaiso, Avda. Brasil 2950, Casilla 4059, Valparaiso (Chile)

    2010-11-15

    Research highlights: {yields} The presence of Polyaniline in the Al-Cu system produces a decrease in the oxygen reduction reaction. {yields} In the marine enviroment, aluminium in Al-Cu couples, suffers pitting and exfoliation. {yields} The aluminium deterioration increases with chloride and enviromental sulphur dioxide presence, mainly when it is united to bare copper. - Abstract: In this study, we examined how aluminium corrosion in Al-Cu/PANI galvanic couples in a marine environment is influenced by deposition of polyaniline (PANI) on copper. Polarization curves and immersion assays in 0.1 M NaCl were performed. The morphologies of etched Al and corrosion products were observed by SEM, and the Al ions in solution were quantified by atomic absorption spectroscopy. A reduction in aluminium damage due to galvanic corrosion was observed as a result of decreased effective area for the oxygen reduction reaction on Cu/PANI electrode. Furthermore, an electrochemical reduction of PANI from leucoemeraldine to emeraldine base is proposed.

  9. Decreased toxicity of aluminium when the ionic strength increases in water; Blir aluminium mindre toksisk naar ionestyrken i vannet oeker?

    Energy Technology Data Exchange (ETDEWEB)

    Alstad, E.W. [Oslo Univ. (Norway)

    1996-01-01

    The conference paper evaluates the acute mortality of fish caused by the toxicity of aluminium in water. The evaluation is based on the polymerization hypothesis. According to the author, the level of toxicity decreases when the concentration and charge of ions increase. The paper presents the preliminary results from the executed experiment. 2 refs., 2 figs., 1 tab.

  10. Energy conversion from aluminium and phosphate rich solution via ZnO activation of aluminium

    Energy Technology Data Exchange (ETDEWEB)

    Slaughter, Gymama, E-mail: gslaught@umbc.edu; Sunday, Joshua; Stevens, Brian

    2015-08-01

    Electrochemical power sources have motivated intense research efforts in the development of alternative ‘green’ power sources for ultra-low powered bioelectronic devices. Biofuel cells employ immobilized enzymes to convert the available chemical energy of organic fuels directly into electricity. However, biofuel cells are limited by short lifetime due to enzyme inactivation and frequent need to incorporate mediators to shuttle electrons to the final electron acceptor. In this context, other electrochemical power sources are necessary in energy conversion and storage device applications. Here we report on the fabrication and characterization of a membrane-free aluminium/phosphate cell based on the activation of aluminium (Al) using ZnO nanocrystal in an Al/phosphate cell as a ‘green’ alternative to the traditional enzymatic biofuel cells. The hybrid cell operates in neutral phosphate buffer solution and physiological saline buffer. The ZnO modifier in the phosphate rich electrolyte activated the pitting of Al resulting in the production of hydrogen, as the reducing agent for the reduction of H{sub 2}PO{sub 4}{sup −} ions to HPO{sub 3}{sup 2−} ions at a formal potential of −0.250 V vs. Ag/AgCl. Specifically, the fabricated cell operating in phosphate buffer and physiological saline buffer exhibit an open-circuit voltage of 0.810 V and 0.751 V and delivered a maximum power density of 0.225 mW cm{sup −2} and 1.77 mW cm{sup −2}, respectively. Our results demonstrate the feasibility of generating electricity by activating Al as anodic material in a hybrid cell supplied with phosphate rich electrolyte. Our approach simplifies the construction and operation of the electrochemical power source as a novel “green” alternative to the current anodic substrates used in enzymatic biofuel cells for low power bioelectronics applications. - Graphical abstract: Display Omitted - Highlights: • ZnO activation of metallic Al for generating electricity for

  11. Effects of Nano-Aluminium on The Combustion of A PolyNIMMO-Based Propellant

    Institute of Scientific and Technical Information of China (English)

    Clive Woodley; Peter Henning

    2014-01-01

    Propellants containing micro-aluminium particles have been shown to produce faster burn rates than conventional gun propellants.However,they are also more abrasive than conventional propellants.Nano-material propellants have been reported to give similar benefits to micron-material propellants but without the disadvantage of increased abrasion.Tests were conducted to compare the burn rates,ignitability and wear rates of a propellant loaded with 0% aluminium,15% micro-aluminium and 15%nano-aluminium.Closed vessel tests showed a burn rate increase of 39% in the range 30-250 MPa,and 70% at low pressure (50-100 MPa)for the nano-aluminium propellant compared with the baseline propellant.The micro-aluminium propellant showed only a 10% increase in the burn rate compared with the standard propellant.The ignition delay for the nano-aluminium propellant was slightly shorter than that of the baseline propellant.Substantially increased wear rates were measured for the micro-aluminium propellant.The nano-aluminium propellant showed reduced wear rates compared with the micro-aluminium propellant but these were still substantially greater than those for the baseline propellant.

  12. Elevated urinary aluminium in current and past users of illicit heroin.

    Science.gov (United States)

    Exley, Christopher; Ahmed, Usman; Polwart, Anthony; Bloor, Roger N

    2007-06-01

    The use of illicit heroin is associated with aberrant neurology of unknown aetiology and various psychiatric illnesses. Aluminium, which is a proven neurotoxin, is present in significant amounts in illicit heroin and may also be volatilized and inhaled following the vaporization of heroin off aluminium foil ('Chasing the Dragon'). The purpose of this study was to establish if the use of illicit heroin was associated with an increase in the body burden of aluminium. We have used graphite furnace atomic absorption spectrometry to measure the aluminium and iron contents of the urine of current and past users of illicit heroin and used these data to estimate body burdens of aluminium. Urinary excretion of aluminium is the most effective non-invasive indicator of the body burden of aluminium and was found to be significantly (P aluminium from the use of illicit heroin may be of particular significance because the urinary excretion of iron, another major contaminant of illicit heroin, in users (mean +/- SD; 53 +/- 63 nmol/mmol creatinine) was not significantly different (P > 0.05) from the control population (mean +/- SD; 38 +/- 18 nmol/mmol creatinine). We have shown for the first time that the use of illicit heroin may be a significant contributor to the body burden of aluminium. Further research will be required to determine if adventitious aluminium has a role in heroin use-related neuropathology and neurology.

  13. Non-invasive therapy to reduce the body burden of aluminium in Alzheimer's disease.

    Science.gov (United States)

    Exley, Christopher; Korchazhkina, Olga; Job, Deborah; Strekopytov, Stanislav; Polwart, Anthony; Crome, Peter

    2006-09-01

    There are unexplained links between human exposure to aluminium and the incidence, progression and aetiology of Alzheimer's disease. The null hypothesis which underlies any link is that there would be no Alzheimer's disease in the effective absence of a body burden of aluminium. To test this the latter would have to be reduced to and retained at a level that was commensurate with an Alzheimer's disease-free population. In the absence of recent human interference in the biogeochemical cycle of aluminium the reaction of silicic acid with aluminium has acted as a geochemical control of the biological availability of aluminium. This same mechanism might now be applied to both the removal of aluminium from the body and the reduced entry of aluminium into the body while ensuring that essential metals, such as iron, are unaffected. Based upon the premise that urinary aluminium is the best non-invasive estimate of body burden of aluminium patients with Alzheimer's disease were asked to drink 1.5 L of a silicic acid-rich mineral water each day for five days and, by comparison of their urinary excretion of aluminium pre-and post this simple procedure, the influence upon their body burden of aluminium was determined. Drinking the mineral water increased significantly (Paluminium (86.0 +/- 24.3 to 62.2 +/- 23.2 nmol/mmol creatinine). The latter was achieved without any significant (P>0.05) influence upon the urinary excretion of iron (20.7 +/- 9.5 to 21.7 +/- 13.8 nmol/mmol creatinine). The reduction in urinary aluminium supported the future longer-term use of silicic acid as non-invasive therapy for reducing the body burden of aluminium in Alzheimer's disease.

  14. Aluminium content of foods originating from aluminium-containing food additives.

    Science.gov (United States)

    Ogimoto, Mami; Suzuki, Kumi; Haneishi, Nahoko; Kikuchi, Yuu; Takanashi, Mayu; Tomioka, Naoko; Uematsu, Yoko; Monma, Kimio

    2016-09-01

    Aluminium (Al) levels of 90 food samples were investigated. Nineteen samples contained Al levels exceeding the tolerable weekly intake (TWI) for young children [body weight (bw): 16 kg] when consuming two servings/week. These samples were purchased multiple times at specific intervals and were evaluated for Al levels. Al was detected in 27 of the 90 samples at levels ranging from 0.01 (limit of quantitation) to 1.06 mg/g. Of these, the Al intake levels in two samples (cookie and scone mix, 1.3 and 2 mg/kg bw/week, respectively) exceeded the TWI as established by European Food Safety Authority, although the level in the scone mix was equivalent to the provisional TWI (PTWI) as established by Joint Food and Agriculture Organization of the United Nations/World Health Organization Expert Committee on Food Additives. The Al levels markedly decreased in 14 of the 19 samples with initially high Al levels. These results indicated reductions in the Al levels to below the PTWI limits in all but two previously identified food samples.

  15. RESPONSE OF PHENOLIC METABOLISM INDUCED BY ALUMINIUM TOXICITY IN FAGOPYRUM ESCULENTUM MOENCH. PLANTS.

    Science.gov (United States)

    Smirnov, O E; Kosyan, A M; Kosyk, O I; Taran, N Yu

    2015-01-01

    Buckwheat genus (Fagopyrum Mill.) is one of the aluminium tolerant taxonomic units of plants. The aim of the study was an evaluation of the aluminium (50 μM effect on phenolic accumulation in various parts of buckwheat plants (Fagopyrum esculentum Moench). Detection of increasing of total phenolic content, changes in flavonoid and anthocyanin content and phenylalanine ammonia-lyase activity (PAL) were revealed over a period of 10 days of exposure to aluminium. The most significant effects of aluminium treatment on phenolic compounds accumulation were total phenolic content increasing (by 27.2%) and PAL activity rising by 2.5 times observed in leaves tissues. Received data could be helpful to understand the aluminium tolerance principles and relationships of phenolic compounds to aluminium phytotoxicity.

  16. Aluminium in food and daily dietary intake assessment from 15 food groups in Zhejiang Province, China.

    Science.gov (United States)

    Zhang, Hexiang; Tang, Jun; Huang, Lichun; Shen, Xianghong; Zhang, Ronghua; Chen, Jiang

    2016-06-01

    Aluminium was measured in 2580 samples of 15 food groups and dietary exposure was estimated. Samples were purchased and analysed during 2010 to 2014. High aluminium levels were found in jellyfish (mean 4862 mg/kg), laver (mean 455.2 mg/kg) and fried twisted cruller (mean 392.4 mg/kg). Dietary exposure to aluminium was estimated for Zhejiang residents. The average dietary exposure to aluminium via 15 food groups in Zhejiang Province was 1.15 mg/kg bw/week, which is below the provisional tolerable weekly intake of 2 mg/kg bw /week. Jellyfish is the main Al contributor, providing 37.6% of the daily intake via these 15 food groups. This study provided new information on aluminium levels and assessment of aluminium (Al) dietary exposure in Zhejiang Province of China.

  17. High-pressure direct synthesis of aluminium nitride

    CERN Document Server

    Bockowski, M; Grzegory, I; Krukowski, S; Wróblewski, M; Porowski, S

    2002-01-01

    We report the results of direct synthesis of aluminium nitride (AlN) under high nitrogen pressure up to 1 GPa and temperatures up to 2000 K. At pressure from 10 to 650 MPa we observe the combustion synthesis of AlN. As the result of the combustion process one can obtain the AlN sintered powder or AlN/Al metal matrix composites. For N sub 2 pressure higher than 650 MPa the crystal growth of AlN from the solution of atomic nitrogen in aluminium is possible. Both needle-like and bulk AlN single crystals, up to 1 cm and 1 mm, respectively, have been obtained.

  18. Thermal Effect of Ceramic Nanofiller Aluminium Nitride on Polyethylene Properties

    Directory of Open Access Journals (Sweden)

    Omer Bin Sohail

    2012-01-01

    Full Text Available Ethylene polymerization was done to form polyethylene nano-composite with nanoaluminum nitride using zirconocene catalysts. Results show that the catalytic activity is maximum at a filler loading of 15 mg nanoaluminum nitride. Differential scanning calorimeter (DSC and X-ray diffraction (XRD results show that percentage crystallinity was also marginally higher at this amount of filler. Thermal behavior of polyethylene nanocomposites (0, 15, 30, and 45 mg was studied by DSC and thermal gravimetric analyzer (TGA. Morphology of the component with 15 mg aluminium nitride is more fibrous as compared to 0 mg aluminium nitride and higher filler loading as shown by SEM images. In order to understand combustibility behavior, tests were performed on microcalorimeter. Its results showed decrease in combustibility in polyethylene nanocomposites as the filler loading increases.

  19. Fabrication of anodic aluminium oxide templates on curved surfaces.

    Science.gov (United States)

    Yin, Aijun; Guico, Rodney S; Xu, Jimmy

    2007-01-24

    Aluminium anodization provides a simple and inexpensive way to obtain nanoporous templates with uniform and controllable pore diameters and periods over a wide range. Moreover, one of the interesting possibilities afforded by the anodization process is that the anodization can take place on arbitrary surfaces, such as curved surfaces, which has not yet been well studied or applied in nanofabrication. In this paper, we characterize the anodization of Al films on silicon substrates with a curved top surface. The structures of the resultant anodic aluminium oxide (AAO) films are examined by scanning electron microscopy. Unique features including cessation, bending, and branching of pore channels are observed in the curved area. Possible growth mechanisms are proposed, which can also contribute to the understanding of the self-organization mechanism in the formation of porous AAO membranes. The new structures may open new opportunities in optical, electronic and electrochemical applications.

  20. Impact of Inert Metal Particles Flow on Aluminium Plate

    Institute of Scientific and Technical Information of China (English)

    WANG Zhongqi; LIU Yi; CHEN Yahong; BAI Chunhua

    2008-01-01

    Inert metal explosive, a new kind of explosive, is a mixture of high explosive and inert metal particle.When this kind of explosive is detonated, an inert metal particle flow will be formed by the explosive product driving.To determine the characteristics of the movement of the metal particle flow, a series of aluminium plates were designed to be the targets on which the metal particle flow impacted.The test result was presented and a numerical model was set up to analyze the impact of the high speed inert metal particles on aluminium plate.Based on the numerical analysis, the relationship between the characteristic of the mark on the target plate and the initial condition of the inert metal particles was proposed.From the analysis of the impact on target plates, more information about the movement of the metal particles could be reconstructed.

  1. TORSIONAL DEFORMATION AND FATIGUE BEHAVIOUR OF 6061 ALUMINIUM ALLOY

    Directory of Open Access Journals (Sweden)

    marini marno

    2012-02-01

    Full Text Available Torsional deformation and fatigue behaviour of both solid and thin-walled tubular specimens were made from as-received and heat treated 6061 aluminium alloy were studied. 6061 aluminium alloy have been widely used as a candidate material in automobile, aerospace, aircraft and structural application because of their superior mechanical properties such as high strength to weight ratio, good ductility and others. The differences in cyclic deformation and fatigue behaviours between round and solid specimens where a stress gradient exist, and thin-walled tubular specimens where a uniform stress state is commonly assumed, are also discussed. Von Mises and Tresca criteria has been used to predict the monotonic and cyclic deformation curve and compared to the torsional data obtained from the experiment. The S-N curve was used to present and evaluate the fatigue life of the specimens. Through fractographic analysis, failure criteria of fracture surfaces were observed and discussed. 

  2. Effects and mechanisms of grain refinement in aluminium alloys

    Indian Academy of Sciences (India)

    K T Kashyap; T Chandrashekar

    2001-08-01

    Grain refinement plays a crucial role in improving characteristics and properties of cast and wrought aluminium alloys. Generally Al–Ti and Al–Ti–B master alloys are added to the aluminium alloys to grain refine the solidified product. The mechanism of grain refinement is of considerable controversy in the scientific literature. The nucleant effects i.e. which particle and its characteristics nucleate -Al, has been the subject of intensive research. Lately the solute effect i.e. the effect of dissolved titanium on grain refinement, has come into forefront of grain refinement research. The present paper attempts to review the literature on the nucleant effects and solute effects on grain refinement and addresses the importance of dissolved titanium in promoting nucleation of -Al on nucleant particles.

  3. Potentiostatic Electrochemical Preparation and Characterisation of Aluminium Containing Nickel Selenide

    Directory of Open Access Journals (Sweden)

    Sandeep Gohar

    2014-01-01

    Full Text Available The wide range of properties exhibited by Al based alloy makes them suitable for different applications. Aluminium containing nickel Selenide ternary alloy possess considerable corrosion resistance as compared to their pure metal counterparts. The objective of the present work has been focused on the preparation and characterisation of its thin film. Alloying with Aluminium improve the oxidation resistance and increases the heat conductivity of the alloy. There is always a high demand for plating Al and its alloys in automotive and aerospace products, house-hold goods, and artificial jewellery etc,. The morphological and the structural studies of the electrodeposited thin film were determined by Scanning Electron Microscope (SEM images and X-Ray Diffraction Pattern (XRD while elemental composition has been done by Energy Dispersive X-Ray Spectroscopy (EDAX analysis.

  4. Surface roughness effects on aluminium-based ultraviolet plasmonic nanolasers

    Science.gov (United States)

    Chung, Yi-Cheng; Cheng, Pi-Ju; Chou, Yu-Hsun; Chou, Bo-Tsun; Hong, Kuo-Bin; Shih, Jheng-Hong; Lin, Sheng-Di; Lu, Tien-Chang; Lin, Tzy-Rong

    2017-01-01

    We systematically investigate the effects of surface roughness on the characteristics of ultraviolet zinc oxide plasmonic nanolasers fabricated on aluminium films with two different degrees of surface roughness. We demonstrate that the effective dielectric functions of aluminium interfaces with distinct roughness can be analysed from reflectivity measurements. By considering the scattering losses, including Rayleigh scattering, electron scattering, and grain boundary scattering, we adopt the modified Drude-Lorentz model to describe the scattering effect caused by surface roughness and obtain the effective dielectric functions of different Al samples. The sample with higher surface roughness induces more electron scattering and light scattering for SPP modes, leading to a higher threshold gain for the plasmonic nanolaser. By considering the pumping efficiency, our theoretical analysis shows that diminishing the detrimental optical losses caused by the roughness of the metallic interface could effectively lower (~33.1%) the pumping threshold of the plasmonic nanolasers, which is consistent with the experimental results.

  5. Finite size melting of spherical solid-liquid aluminium interfaces

    DEFF Research Database (Denmark)

    Chang, J.; Johnson, Erik; Sakai, T.;

    2009-01-01

    We have investigated the melting of nano-sized cone shaped aluminium needles coated with amorphous carbon using transmission electron microscopy. The interface between solid and liquid aluminium was found to have spherical topology. For needles with fixed apex angle, the depressed melting...... to the conclusion that the depressed melting temperature is not controlled solely by the inverse radius 1/R. Instead, we found a direct relation between the depressed melting temperature and the ratio between the solid-liquid interface area and the molten volume....... temperature of this spherical interface, with radius R, was found to scale linearly with the inverse radius 1/R. However, by varying the apex angle of the needles we show that the proportionality constant between the depressed melting temperature and the inverse radius changes significantly. This led us...

  6. Prediction of the ballistic limit of an aluminium sandwich panel

    Science.gov (United States)

    Campbell, J.; De Vuyst, T.; Vignjevic, R.; Hughes, K.

    2016-08-01

    This paper presents research on modelling the impact of a 150g projectile on a 35mm thick aluminium sandwich panel. The objective of the work is a predictive modelling capability for the ballistic limit of the panel. A predictive modelling capability supports the design of capture and deorbit missions for large items of space debris such as satellites and rocket upper stages. A detailed explicit finite element model was built using the LSDYNA software and results were compared with experimental data for the projectile exit velocity to establish key parameters. The primary parameters influencing the model behaviour were the strength and failure of the aluminium face sheets and the friction between projectile and panel. The model results showed good agreement with experimental results for ogive nose projectiles, but overestimated the exit velocity for flat nose projectiles.

  7. Properties of native ultrathin aluminium oxide tunnel barriers

    CERN Document Server

    Gloos, K; Pekola, J P

    2003-01-01

    We have investigated planar metal-insulator-metal tunnel junctions with aluminium oxide as the dielectricum. These oxide barriers were grown on an aluminium electrode in pure oxygen at room temperature till saturation. By applying the Simmons model we derived discrete widths of the tunnelling barrier, separated by DELTA s approx 0.38 nm. This corresponds to the addition of single layers of oxygen atoms. The minimum thickness of s sub 0 approx 0.54 nm is then due to a double layer of oxygen. We found a strong and systematic dependence of the barrier height on the barrier thickness. Breakdown fields up to 5 GV m sup - sup 1 were reached. They decreased strongly with increasing barrier thickness. Electrical breakdown could be described by a metal-insulator like transition of the dielectric barrier due to the large density of tunnelling electrons.

  8. Persistent Skin Reactions and Aluminium Hypersensitivity Induced by Childhood Vaccines.

    Science.gov (United States)

    Salik, Elaha; Løvik, Ida; Andersen, Klaus E; Bygum, Anette

    2016-11-02

    There is increasing awareness of reactions to vaccination that include persistent skin reactions. We present here a retrospective investigation of long-lasting skin reactions and aluminium hypersensitivity in children, based on medical records and questionnaires sent to the parents. In the 10-year period 2003 to 2013 we identified 47 children with persistent skin reactions caused by childhood vaccinations. Most patients had a typical presentation of persisting pruritic subcutaneous nodules. Five children had a complex diagnostic process involving paediatricians, orthopaedics and plastic surgeons. Two patients had skin biopsies performed from their skin lesions, and 2 patients had the nodules surgically removed. Forty-two children had a patch-test performed with 2% aluminium chloride hexahydrate in petrolatum and 39 of them (92%) had a positive reaction. The persistent skin reactions were treated with potent topical corticosteroids and disappeared slowly. Although we advised families to continue vaccination of their children, one-third of parents omitted or postponed further vaccinations.

  9. Lewis acid fragmentation of a lithium aryloxide cage: generation of new heterometallic aluminium-lithium species.

    Science.gov (United States)

    Muñoz, Ma Teresa; Urbaneja, Carmen; Temprado, Manuel; Mosquera, Marta E G; Cuenca, Tomás

    2011-11-14

    Heterometallic aluminium-lithium species were prepared by the fragmentation reaction of the hexametallic cage compound [Li{2,6-(MeO)(2)C(6)H(3)O}](6) (1) with alkyl aluminium derivatives. Depending on the aluminium precursor, the species formed present different nuclearities in the solid state as shown by single crystal X-ray analysis. Spectroscopic and computational studies have been performed to study the nuclearity of the synthesized compounds in solution.

  10. Insight into the cellular fate and toxicity of aluminium adjuvants used in clinically approved human vaccinations

    OpenAIRE

    2016-01-01

    Aluminium adjuvants remain the most widely used and effective adjuvants in vaccination and immunotherapy. Herein, the particle size distribution (PSD) of aluminium oxyhydroxide and aluminium hydroxyphosphate adjuvants was elucidated in attempt to correlate these properties with the biological responses observed post vaccination. Heightened solubility and potentially the generation of Al3+ in the lysosomal environment were positively correlated with an increase in cell mortality in vitro, pote...

  11. Sintering of nano crystalline silicon carbide doping with aluminium nitride

    Indian Academy of Sciences (India)

    M S Datta; A K Bandyopadhyay; B Chaudhuri

    2002-04-01

    Sinterable silicon carbide powders were prepared by attrition milling and chemical processing of an acheson type -SiC. Pressureless sintering of these powders was achieved by addition of aluminium nitride together with carbon. Nearly 99% sintered density was obtained. The mechanism of sintering was studied by scanning electron microscopy and transmission electron microscopy. This study shows that the mechanism is a solid sintering process.

  12. Dispersionen für den Korrosionsschutz von Aluminium

    OpenAIRE

    Henke, Axel

    2001-01-01

    The adsorption and organization of reactive microgels has been investigated on technical aluminium. By means of a two-step emulsion polymerisation with phosphate substituted monomer we obtain polymeric nano-particles with phosphate groups on the surface. In a first step cross-linked butyl acrylate/styrene particles were formed. In a second step a mixture of functionalised acrylate and butyl acrylate/styrene was added to the system. In this way, the composite particles were obtained. Particle ...

  13. Estimation of Beta-Naphthol in Aluminium Soap

    Directory of Open Access Journals (Sweden)

    S. C. Ganguli

    1962-01-01

    Full Text Available A method is described for the determination of naphtha in aluminium soaps based on the Formation of dye para red by coupling the former with diazotised p-nitraniline under controlled temperature and pH and estimation of the colour developed after extraction with alcoholic NaOH. The method has been found to be reasonably accurate under the experimental conditions.

  14. Oblique Impact of Projectile on Thin Aluminium Plates

    Directory of Open Access Journals (Sweden)

    W.U. Khan

    2003-04-01

    Full Text Available Experiments were performed, wherein cylindrical projectiles made of hardened steel were impacted on commercially available aluminium plates at different angles. Projectiles were of 12.8 mm diameter and plates were of 0.81 mm, 1.52mm and 1.91mm thicknesses. Based on the experimental results, an analytical model has been developed to predict the residual velocity of the projectile and the ballistic limit of the plate.

  15. Inoculation of aluminium with titanium and boron addition

    Directory of Open Access Journals (Sweden)

    J. Szajnar

    2007-07-01

    Full Text Available Purpose: The main aim of studies was to determine mechanism of inocualtion of pure alumnium EN AW-Al99,5 structure with addition of titanium and boron, which are introduced to liquid metal in small ammount - less than obligatory standard PN-EN 573-3 (concerning about aluminium purity.Design/methodology/approach: To investigations it was used light microscopy, X-ray Phase Analysis and TEM. Surfaces of samples which were prepared for macrostructure analysis were etched with use of solution of: 50g Cu, 400ml HCl, 300ml HNO3 and 300ml H2O. Surfaces of samples which were were prepared for microstructure analysis were etched with use of solution of: 0,5ml HF, 99,5ml H2O. Thin foils for TEM investigations were electropolished with use of 20 ml HClO4 and 80ml CH3OH.Findings: The results of investigations and their analysis show, that increase of size reduction in aluminium EN AW-Al99,5 after inoculation with (Ti+B result from “washers” of type Ti3Al and CuTi2 to heterogeneous nucleation formation.Research limitations/implications: I further research, authors of this paper are going to identifiy the “washers” to heterogeneous nucleation, in aluminium structure after inoculation with zirconium and vanadium addition.Practical implications: The work presents refinement of structure method which are particularly important in continuous and semi – continuous casting where products are used for plastic forming. Large columnar crystals zone result in forces extrusion rate reduction and during the ingot rolling delamination of external layers can occur. Thus, in some cases ingot skinning is needed, which rises the production costs.Originality/value: Contributes to research on size reduction in pure aluminium structure.

  16. The aluminium content of infant formulas remains too high

    OpenAIRE

    2013-01-01

    Background Recent research published in this journal highlighted the issue of the high content of aluminium in infant formulas. The expectation was that the findings would serve as a catalyst for manufacturers to address a significant problem of these, often necessary, components of infant nutrition. It is critically important that parents and other users have confidence in the safety of infant formulas and that they have reliable information to use in choosing a product with a lower content ...

  17. Spectroscopic diagnostics of plasma during laser processing of aluminium

    Science.gov (United States)

    Lober, R.; Mazumder, J.

    2007-10-01

    The role of the plasma in laser-metal interaction is of considerable interest due to its influence in the energy transfer mechanism in industrial laser materials processing. A 10 kW CO2 laser was used to study its interaction with aluminium under an argon environment. The objective was to determine the absorption and refraction of the laser beam through the plasma during the processing of aluminium. Laser processing of aluminium is becoming an important topic for many industries, including the automobile industry. The spectroscopic relative line to continuum method was used to determine the electron temperature distribution within the plasma by investigating the 4158 Å Ar I line emission and the continuum adjacent to it. The plasmas are induced in 1.0 atm pure Ar environment over a translating Al target, using f/7 and 10 kW CO2 laser. Spectroscopic data indicated that the plasma composition and behaviour were Ar-dominated. Experimental results indicated the plasma core temperature to be 14 000-15 300 K over the incident range of laser powers investigated from 5 to 7 kW. It was found that 7.5-29% of the incident laser power was absorbed by the plasma. Cross-section analysis of the melt pools from the Al samples revealed the absence of any key-hole formation and confirmed that the energy transfer mechanism in the targets was conduction dominated for the reported range of experimental data.

  18. The Effect of Thickness of Aluminium Films on Optical Reflectance

    Directory of Open Access Journals (Sweden)

    Robert Lugolole

    2015-01-01

    Full Text Available In Uganda and Africa at large, up to 90% of the total energy used for food preparation and water pasteurization is from fossil fuels particularly firewood and kerosene which pollute the environment, yet there is abundant solar energy throughout the year, which could also be used. Uganda is abundantly rich in clay minerals such as ball clay, kaolin, feldspar, and quartz from which ceramic substrates were developed. Aluminium films of different thicknesses were deposited on different substrates in the diffusion pump microprocessor vacuum coater (Edwards AUTO 306. The optical reflectance of the aluminium films was obtained using a spectrophotometer (SolidSpec-3700/DUV-UV-VIS-NIR at various wave lengths. The analysis of the results of the study revealed that the optical reflectance of the aluminium films was above 50% and increased with increasing film thickness and wavelength. Thus, this method can be used to produce reflector systems in the technology of solar cooking and other appliances which use solar energy.

  19. Analysis of Orthogonal Cutting of Aluminium-based Composites

    Directory of Open Access Journals (Sweden)

    P. Ravinder Reddy

    2002-10-01

    Full Text Available A turning test on aluminium-based metal-matrix composites (MMCs (aluminium-30% silicon carbide was performed with K-20 carbide tool material and wear patterns and the wear land growth rates were analysed to evaluate the wear characteristics and to classify the relationship between the physical (mechanical properties and the flank wear of cutting tools. The study was also extended to the machining aspects and the width of cuts on MMCs and the influence of various cutting parameters. The experiments were conducted to measure the temperature along the cutting tool edge using thermocouple at various cutting speeds, and depth of cuts, keeping the feed rate constant while turning with K-20 carbide cutting tool. The finite-element method was used to simulate the orthogonal cutting of aluminium-based MMCs. The heat generation at the chip-tool interface, frictional heat generation at the tool flank, and the heat generation at the work tool interface were calculated analytically and imposed as boundary conditions. The analysis of the steady-state heat transfer was carried out and the temperature distribution at cutting edge, shear zone, and interface regions have been reported.

  20. Control of Microthrix parvicella by aluminium salts addition.

    Science.gov (United States)

    Durban, N; Juzan, L; Krier, J; Gillot, S

    2016-01-01

    Aluminium and iron chloride were added to a biological nutrient removal pilot plant (1,500 population equivalent) treating urban wastewater to investigate the control of Microthrix parvicella bulking and foaming by metallic salts. Monitoring plant performance over two 6-month periods showed a slight impact on the removal efficiencies. Addition of metallic salts (Me; aluminium or aluminium + iron) at a concentration of 41 mmol Me(kg MLSS·d) (MLSS: mixed liquor suspended solids) over 70 days allowed a stabilization of the diluted sludge volume index (DSVI), whereas higher dosages (94 mmol Me(kg MLSS·d) over 35 days or 137 mmol Me(kg MLSS·d) over 14 days induced a significant improvement of the settling conditions. Microscopic observations showed a compaction of biological aggregates with an embedding of filamentous bacteria into the flocs that is not specific to M. parvicella as bacteria from phylum Chloroflexi are embedded too. The quantitative polymerase chain reaction targeting M. parvicella further indicated a possible growth limitation in addition to the flocculation impact at the high dosages of metallic salts investigated. DSVI appeared to be correlated with the relative abundance of M. parvicella.

  1. Neuroprotective effect of Allium cepa L. in aluminium chloride induced neurotoxicity.

    Science.gov (United States)

    Singh, Tanveer; Goel, Rajesh Kumar

    2015-07-01

    The present study was envisaged to investigate the neuroprotective potential of Allium cepa (A. cepa) in aluminium chloride induced neurotoxicity. Aluminium chloride (50 mg/kg/day) was administered orally in mice supplemented with different doses of A. cepa hydroethanolic extract for a period of 60 days. Various behavioural, biochemical and histopathological parameters were estimated in aluminium exposed animals. Chronic aluminium administration resulted in significant motor incoordination and memory deficits, which were also endorsed biochemically as there was increased oxidative stress as well as elevated acetylcholinesterase (AChE) and aluminium levels in the brain. Supplementation with A. cepa in aluminium exposed animals significantly improved muscle coordination and memory deficits as well as reduced oxidative stress, AChE and decreased abnormal aluminium deposition in the brain. Histopathologically, there was marked deterioration visualized as decreased vacuolated cytoplasm as well as decreased pyramidal cells in the hippocampal area of mice brain which were found to be reversed with A. cepa supplementation. Administration of BADGE (PPARγ antagonist) in aluminium exposed animals reversed the neuroprotective potential of A. cepa as assessed with various behavioural, biochemical, neurochemical and histopathological estimations. In conclusion, finding of this study suggested significant neuroprotective potential of A. cepa in aluminium induced neurotoxicity. Further, the role of PPARγ receptor agonism has also been suggested as a putative neuroprotective mechanism of A. cepa, which needs further studies for confirmation.

  2. Dietary exposure to aluminium and health risk assessment in the residents of Shenzhen, China.

    Directory of Open Access Journals (Sweden)

    Mei Yang

    Full Text Available Although there are great changes of dietary in the past few decades in China, few are known about the aluminium exposure in Chinese diet. The aim of this study is to systematically evaluate the dietary aluminium intake level in residents of Shenzhen, China. A total of 853 persons from 244 household were investigated their diet by three days food records. Finally, 149 kinds of foods in 17 food groups were selected to be the most consumed foods. From them, 1399 food samples were collected from market to test aluminium concentration. High aluminium levels were found in jellyfish (median, 527.5 mg/kg, fried twisted cruller (median, 466.0 mg/kg, shell (median, 107.1 mg/kg. The Shenzhen residents' average dietary aluminium exposure was estimated at 1.263 mg/kg bw/week which is lower than the PTWI (provisional tolerable weekly intake. But 0-2 and 3-13 age groups have the highest aluminium intake exceeding the PTWI (3.356 mg/kg bw/week and 3.248 mg/kg bw/week than other age groups. And the main dietary aluminium exposure sources are fried twisted cruller, leaf vegetables and bean products. Our study suggested that even three decades rapid economy development, children in Shenzhen still have high dietary aluminium exposure risk. How to control high dietary aluminium exposure still is a great public health challenge in Shenzhen, China.

  3. Comparison of the x-ray attenuation properties of breast calcifications, aluminium, hydroxyapatite and calcium oxalate.

    Science.gov (United States)

    Warren, L M; Mackenzie, A; Dance, D R; Young, K C

    2013-04-07

    Aluminium is often used as a substitute material for calcifications in phantom measurements in mammography. Additionally, calcium oxalate, hydroxyapatite and aluminium are used in simulation studies. This assumes that these materials have similar attenuation properties to calcification, and this assumption is examined in this work. Sliced mastectomy samples containing calcification were imaged at ×5 magnification using a digital specimen cabinet. Images of the individual calcifications were extracted, and the diameter and contrast of each calculated. The thicknesses of aluminium required to achieve the same contrast as each calcification when imaged under the same conditions were calculated using measurements of the contrast of aluminium foils. As hydroxyapatite and calcium oxalate are also used to simulate calcifications, the equivalent aluminium thicknesses of these materials were also calculated using tabulated attenuation coefficients. On average the equivalent aluminium thickness was 0.85 times the calcification diameter. For calcium oxalate and hydroxyapatite, the equivalent aluminium thicknesses were 1.01 and 2.19 times the thickness of these materials respectively. Aluminium and calcium oxalate are suitable substitute materials for calcifications. Hydroxyapatite is much more attenuating than the calcifications and aluminium. Using solid hydroxyapatite as a substitute for calcification of the same size would lead to excessive contrast in the mammographic image.

  4. Protective effect of curcumin (Curcuma longa), against aluminium toxicity: Possible behavioral and biochemical alterations in rats.

    Science.gov (United States)

    Kumar, Anil; Dogra, Samrita; Prakash, Atish

    2009-12-28

    Aluminium is a potent neurotoxin and has been associated with Alzheimer's disease (AD) causality for decades. Prolonged aluminium exposure induces oxidative stress and increases amyloid beta levels in vivo. Current treatment modalities for AD provide only symptomatic relief thus necessitating the development of new drugs with fewer side effects. The aim of the study was to demonstrate the protective effect of chronic curcumin administration against aluminium-induced cognitive dysfunction and oxidative damage in rats. Aluminium chloride (100 mg/kg, p.o.) was administered to rats daily for 6 weeks. Rats were concomitantly treated with curcumin (per se; 30 and 60 mg/kg, p.o.) daily for a period of 6 weeks. On the 21st and 42nd day of the study behavioral studies to evaluate memory (Morris water maze and elevated plus maze task paradigms) and locomotion (photoactometer) were done. The rats were sacrificed on 43rd day following the last behavioral test and various biochemical tests were performed to assess the extent of oxidative damage. Chronic aluminium chloride administration resulted in poor retention of memory in Morris water maze, elevated plus maze task paradigms and caused marked oxidative damage. It also caused a significant increase in the acetylcholinesterase activity and aluminium concentration in aluminium treated rats. Chronic administration of curcumin significantly improved memory retention in both tasks, attenuated oxidative damage, acetylcholinesterase activity and aluminium concentration in aluminium treated rats (Paluminium-induced cognitive dysfunction and oxidative damage.

  5. Dietary exposure to aluminium and health risk assessment in the residents of Shenzhen, China.

    Science.gov (United States)

    Yang, Mei; Jiang, Lixin; Huang, Huiping; Zeng, Shengbo; Qiu, Fen; Yu, Miao; Li, Xiaorong; Wei, Sheng

    2014-01-01

    Although there are great changes of dietary in the past few decades in China, few are known about the aluminium exposure in Chinese diet. The aim of this study is to systematically evaluate the dietary aluminium intake level in residents of Shenzhen, China. A total of 853 persons from 244 household were investigated their diet by three days food records. Finally, 149 kinds of foods in 17 food groups were selected to be the most consumed foods. From them, 1399 food samples were collected from market to test aluminium concentration. High aluminium levels were found in jellyfish (median, 527.5 mg/kg), fried twisted cruller (median, 466.0 mg/kg), shell (median, 107.1 mg/kg). The Shenzhen residents' average dietary aluminium exposure was estimated at 1.263 mg/kg bw/week which is lower than the PTWI (provisional tolerable weekly intake). But 0-2 and 3-13 age groups have the highest aluminium intake exceeding the PTWI (3.356 mg/kg bw/week and 3.248 mg/kg bw/week) than other age groups. And the main dietary aluminium exposure sources are fried twisted cruller, leaf vegetables and bean products. Our study suggested that even three decades rapid economy development, children in Shenzhen still have high dietary aluminium exposure risk. How to control high dietary aluminium exposure still is a great public health challenge in Shenzhen, China.

  6. Aluminium localization in root tips of the aluminium-accumulating plant species buckwheat (Fagopyrum esculentum Moench).

    Science.gov (United States)

    Klug, Benjamin; Specht, André; Horst, Walter J

    2011-11-01

    Aluminium (Al) uptake and transport in the root tip of buckwheat is not yet completely understood. For localization of Al in root tips, fluorescent dyes and laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) were compared. The staining of Al with morin is an appropriate means to study qualitatively the radial distribution along the root tip axis of Al which is complexed by oxalate and citrate in buckwheat roots. The results compare well with the distribution of total Al determined by LA-ICP-MS which could be reliably calibrated to compare with Al contents by conventional total Al determination using graphite furnace atomic absorption spectrometry. The Al localization in root cross-sections along the root tip showed that in buckwheat Al is highly mobile in the radial direction. The root apex predominantly accumulated Al in the cortex. The subapical root section showed a homogenous Al distribution across the whole section. In the following root section Al was located particularly in the pericycle and the xylem parenchyma cells. With further increasing distance from the root apex Al could be detected only in individual xylem vessels. The results support the view that the 10 mm apical root tip is the main site of Al uptake into the symplast of the cortex, while the subapical 10-20 mm zone is the main site of xylem loading through the pericycle and xylem parenchyma cells. Progress in the better molecular understanding of Al transport in buckwheat will depend on the consideration of the tissue specificity of Al transport and complexation.

  7. Aluminium nitride: from the powder to the substrate. Le nitrure d'aluminium: de la poudre au substrat

    Energy Technology Data Exchange (ETDEWEB)

    Jarrige, J. (Lab. de Ceramiques Nouvelles, Limoges (France)); Mexmain, J. (Lab. de Ceramiques Nouvelles, Limoges (France)); Oumaloul, M. (Lab. de Ceramiques Nouvelles, Limoges (France)); Bachelard, R. (CRRA ELF ATOCHEM, Pierre Benite (France)); Disson, J.P. (CRRA ELF ATOCHEM, Pierre Benite (France))

    1993-04-01

    The aluminium nitride is a material which should replace alumina or beryllia as substrate for power electronic applications. The powder, prepared by carbothermal nitridation, is dispersed in a butanone-2-ethanol azeotrop solvent with a phosphate ester. Electrical conductivity, sedimentation, viscosity have been used to determine which phenomena take place in the defloculation of the suspension. The stability of AlN suspensions is due mainly to an electrostatic mechanism, with a steric contribution. The aluminium nitride tape-casting slip has been sintered at 1850 C in a nitrogen atmosphere. Removing of the binder and plasticizer can be performed in the same oven at 650 C, due to their nature and low concentration. The thermal conductivity of the substrates has been measured and is in the 160 to 200 W/m.K range. (orig.).

  8. Development of solar selective absorber layers on aluminium. Final report; Entwicklung solarselektiver Absorberschichten auf Aluminium fuer Solarkollektoren. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Hoenicke, D.; Moeller, T.; Schwarz, T.

    1998-01-31

    A new electrolytic process was developed to form solar selective layers on aluminium. In the developed process, both the formation of the alumina layer and the deposition of metals into the layer takes place in only one treatment step using a single electrolysis bath. The main step of the so called ISOC-method (impulse structured oxide ceramic) is the anodic oxidation of aluminium which was carried out by using a pulse technique at different voltages. During the anodic polarisation a thin alumina ceramic layer was formed, while the cathodic led to the metal deposition as copper and nickel. The conditions of the electrolysis were varied in order to estimate optimal parameters achieving solar selective layers with high selectivity. Furthermore, a scale-up of the lab scale apparatus to a mini plant was carried out. Finally, the corrosion resistance of the absorber layers was improved by the formation of a thin hydrophobic overlayer using a sol-gel treatment. (orig.) [Deutsch] Ein neuartiges Behandlungsverfahren zur Erzeugung von solarselektiven Absorberschichten auf Aluminium wurde entwickelt. Bei dieser elektrochemischen Behandlung wird in einem Einstufenprozess mit einem Elektrolyten durch eine Kombination von anodischer Oxidation und bipolarer Pulsbehandlung auf der Oberflaeche des Aluminiums eine impulsstrukturierte Oxidkeramik (ISOK) erzeugt. Dabei entsteht durch eine anodische Oxidation eine strukturierte Aluminiumoxidschicht. Bei der bipolaren Pulsbehandlung erfolgt dann eine Abscheidung der im ISOK-Elektrolyten befindlichen Metalle Cu und Ni auf oder in die Aluminiumoxidoberflaeche. Die ISOK-Behandlung wurde vom Labormassstab zu einem ISOK-Verfahren im Miniplant-Massstab entwickelt. Der Einfluss der elektrischen Parameter und der chemischen Zusammensetzung der ISOK-Elektrolyte wurde untersucht. Durch eine auf das ISOK-Verfahren abgestimmte Nachbehandlung, ein Tauchverfahren in einer Sol-Gel-Loesung, entsteht ein Schichtsystem mit hoher Solarselektivitaet

  9. Enhancement of wear and ballistic resistance of armour grade AA7075 aluminium alloy using friction stir processing

    OpenAIRE

    I. Sudhakar; V. Madhu; G. Madhusudhan Reddy; K. Srinivasa Rao

    2015-01-01

    Industrial applications of aluminium and its alloys are restricted because of their poor tribological properties. Thermal spraying, laser surfacing, electron beam welding are the most widely used techniques to alter the surface morphology of base metal. Preliminary studies reveal that the coating and layering of aluminium alloys with ceramic particles enhance the ballistic resistance. Furthermore, among aluminium alloys, 7075 aluminium alloy exhibits high strength which can be compared to tha...

  10. The Hamlet dilemma for aluminium cans in the circular economy: to be or not to be in a closed loop

    DEFF Research Database (Denmark)

    Niero, Monia; Boas, Simon H.; Langen, Håkon

    2015-01-01

    can recycling. We performed a Life Cycle Assessment (LCA) comparing different sources of aluminium: primary aluminium and mixed scraps, Used Beverage Can (UBC) scrap, mixed aluminium packaging scrap and building scrap. The preliminary LCA results show that the lowest environmental impacts come from...... the use of UBC scraps. This suggests that in a circular economy context for aluminium cans it is better to be in a closed loop....

  11. Formation of aluminium, aluminium nitride and nitrogen clusters via laser ablation of nano aluminium nitride. Laser Desorption Ionisation and Matrix-Assisted Laser Desorption Ionisation Time-of-Flight Mass Spectrometry.

    Science.gov (United States)

    Panyala, Nagender Reddy; Prysiazhnyi, Vadym; Slavíček, Pavel; Černák, Mirko; Havel, Josef

    2011-06-30

    Laser Desorption Ionisation (LDI) and Matrix-Assisted Laser Desorption Ionisation (MALDI) Time-of-Flight Mass Spectrometry (TOFMS) were used to study the pulsed laser ablation of aluminium nitride (AlN) nano powder. The formation of Al(m)(+) (m=1-3), N(n)(+) (n=4, 5), AlN(n)(+) (n=1-5, 19, 21), Al(m)N(+) (m=2-3), Al(3)N(2)(+), Al(9)N(n)(+) (n=5, 7, 9, 11 and 15), Al(11)N(n)(+) (n=4, 6, 10, 12, 19, 21, 23, and 25), and Al(13)N(n)(+) (n=25, 31, 32, 33, 34, 35, and 36) clusters was detected in positive ion mode. Similarly, Al(m)(-) (m=1-3), AlN(n)(-) (n=1-3, 5), Al(m)N(-) (n=2, 3), Al(2)N(n)(-) (n=2-4, 28, 30), N(n)(-) (n=2, 3), Al(4)N(7)(-) Al(8)N(n)(-) (n=1-6), and Al(13)N(n)(-) (n=9, 18, 20, 22, 24, 26, 28, 33, 35, 37, 39, 41 and 43) clusters were observed in negative ion mode. The formation of the stoichiometric Al(10) N(10) cluster was shown to be of low abundance. On the contrary, the laser ablation of nano-AlN led mainly to the formation of nitrogen-rich Al(m)N(n) clusters in both negative and positive ion mode. The stoichiometry of the Al(m)N(n) clusters was determined via isotopic envelope analysis and computer modelling.

  12. Influence of Alkali Treatment on the Surface Area of Aluminium Dross

    Directory of Open Access Journals (Sweden)

    N. S. Ahmad Zauzi

    2016-01-01

    Full Text Available Aluminium dross is an industrial waste from aluminium refining industry and classified as toxic substances. However, the disposal of dross as a waste is a burden to aluminium manufacturer industries due to its negative effects to the ecosystem, surface, and ground water. Therefore the purpose of this study is to evaluate the influence of sodium hydroxide (NaOH on the surface area and pore size of aluminium dross. There were 3 stages in the treatment activities, which were leaching, precipitation, and calcination process. The optimum result from this study was the surface area of aluminium dross increases from 10.1 m2/g up to 80.0 m2/g at 40°C, 1% NaOH, and 15-minute reaction time. Thus, aluminium dross has a potential to be converted into other useful material such as catalyst and absorbent. The benefit of this research is that the hazardous industrial waste can be turned into wealth to be used in other applications such as in catalytic activities and absorber in waste water treatment. Further investigation on the physicochemical of aluminium dross with different acid or alkali should be conducted to get deeper understanding on the aluminium dross as a catalyst-type material.

  13. The role of magnesium in the electrochemical behaviour of 5XXX aluminium-magnesium alloys

    NARCIS (Netherlands)

    Flores Ramirez, J.R.

    2006-01-01

    An investigation concerning the effects of magnesium on the intergranular corrosion susceptibility of AA5XXX aluminium alloys was carried out. In the present work, magnesium is found to be highly mobile in the bulk metal as well as in the aluminium oxide. This mobility is also found to be dependent

  14. Design of an aluminium bicycle path integrated in a steel bridge

    NARCIS (Netherlands)

    Maljaars, J.; Soetens, F.; Burggraaf, H.G.

    2007-01-01

    This paper describes the design of the aluminium structure of a bicycle path which is mounted on an existing steel brige. The benefits of aluminium, being low self weight, freedom in design obtained by extrusion and good corrosion resistance were maximal utilized. One of the main drawbacks of alumin

  15. Domestic Output of Aluminium Alloy Hub Surpassing 70 million in 2007

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>According to a report from the hub branch of China Association of Automobile Manufactur- ers,China has produced a total of more than 70 million aluminium alloy hubs in 2007,a year- on-year growth over 25%,while consuming over 700,000 tons of primary aluminium the whole year.

  16. Aluminium in an ocean general circulation model compared with the West Atlantic Geotraces cruises

    NARCIS (Netherlands)

    van Hulten, M. M. P.; Sterl, A.; Tagliabue, A.; Dutay, J. -C.; Gehlen, M.; de Baar, H. J. W.; Middag, R.

    2013-01-01

    A model of aluminium has been developed and implemented in an Ocean General Circulation Model (NEMO-PISCES). In the model, aluminium enters the ocean by means of dust deposition. The internal oceanic processes are described by advection, mixing and reversible scavenging. The model has been evaluated

  17. Microstructure and interfaces of a reaction coating on aluminium alloys by laser processing

    NARCIS (Netherlands)

    Zhou, X.B.; Hosson, J.Th.M. De

    1993-01-01

    This paper reports an approach to coat a ceramic layer on aluminium alloys by means of chemical reaction. The reaction product of Al2O3 layer of 100 µm in thickness has been formed using a powder mixture of silicon oxide and aluminium by laser processing. It turns out that the large amount of heat f

  18. Application of surface plasmon polaritons in the laser ablation and characterisation of thin aluminium films

    Science.gov (United States)

    Cairns, G. F.; McNeill, D. A.; Dawson, P.

    1999-06-01

    Surface modification of thin aluminium films is both produced and characterised by exciting surface plasmon polaritons in an attenuated total reflection geometry: silica prism/aluminium/ aluminium oxide system. The modification is performed, under ambient conditions, by exposure to a low fluence (pulse of radiation from an excimer laser at wavelength 248 nm. Pre- and post-ablation characterisation of samples is performed at a centre wavelength of 250 nm by using a xenon lamp and optical filtration. Modelling of the characteristic reflectance-angle curves from areas exposed to the laser shows both an increased oxide thickness and the presence of an optically absorbing cermet layer, a region of mixed metal and oxide, between the aluminium and the aluminium oxide. Analysis of the results suggests that the interfacial aluminium/oxide region supporting the surface mode is ablated by means of a non-thermal, bond-breaking mechanism leading to further surface oxide formation and a progressively less complete oxidation process for a finite distance into the aluminium film. However, the ablation is frustrated in the sense that there is little or no net loss of aluminium from the system.

  19. The Macro-Adjustment Policies on China’s Aluminium Industry

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    <正>In recent years, China’s aluminium industry has developed rapidly with considerable expansion of the production scale. Presently, China’s aluminum production capacity has taken a quarter of the world total, and China has become the largest aluminium producer in the world, However, such large scaled expan-

  20. Insight into the cellular fate and toxicity of aluminium adjuvants used in clinically approved human vaccinations.

    Science.gov (United States)

    Mold, Matthew; Shardlow, Emma; Exley, Christopher

    2016-08-12

    Aluminium adjuvants remain the most widely used and effective adjuvants in vaccination and immunotherapy. Herein, the particle size distribution (PSD) of aluminium oxyhydroxide and aluminium hydroxyphosphate adjuvants was elucidated in attempt to correlate these properties with the biological responses observed post vaccination. Heightened solubility and potentially the generation of Al(3+) in the lysosomal environment were positively correlated with an increase in cell mortality in vitro, potentially generating a greater inflammatory response at the site of simulated injection. The cellular uptake of aluminium based adjuvants (ABAs) used in clinically approved vaccinations are compared to a commonly used experimental ABA, in an in vitro THP-1 cell model. Using lumogallion as a direct-fluorescent molecular probe for aluminium, complemented with transmission electron microscopy provides further insight into the morphology of internalised particulates, driven by the physicochemical variations of the ABAs investigated. We demonstrate that not all aluminium adjuvants are equal neither in terms of their physical properties nor their biological reactivity and potential toxicities both at the injection site and beyond. High loading of aluminium oxyhydroxide in the cytoplasm of THP-1 cells without immediate cytotoxicity might predispose this form of aluminium adjuvant to its subsequent transport throughout the body including access to the brain.

  1. Aluminium based adjuvants and their effects on mitochondria and lysosomes of phagocytosing cells.

    Science.gov (United States)

    Ohlsson, Lars; Exley, Christopher; Darabi, Anna; Sandén, Emma; Siesjö, Peter; Eriksson, Håkan

    2013-11-01

    Aluminium oxyhydroxide, Al(OH)3 is one of few compounds approved as an adjuvant in human vaccines. However, the mechanism behind its immune stimulating properties is still poorly understood. In vitro co-culture of an aluminium adjuvant and the human monocytic cell line THP-1 resulted in reduced cell proliferation. Inhibition occurred at concentrations of adjuvant several times lower than would be found at the injection site using a vaccine formulation containing an aluminium adjuvant. Based on evaluation of the mitochondrial membrane potential, THP-1 cells showed no mitochondrial rupture after co-culture with the aluminium adjuvant, instead an increase in mitochondrial activity was seen. The THP-1 cells are phagocytosing cells and after co-culture with the aluminium adjuvant the phagosomal pathway was obstructed. Primary or early phagosomes mature into phagolysosomes with an internal pH of 4.5 - 5 and carry a wide variety of hydrolysing enzymes. Co-culture with the aluminium adjuvant yielded a reduced level of acidic vesicles and cathepsin L activity, a proteolytic enzyme of the phagolysosomes, was almost completely inhibited. THP-1 cells are an appropriate in vitro model in order to investigate the mechanism behind the induction of a phagocytosing antigen presenting cell into an inflammatory cell by aluminium adjuvants. Much information will be gained by investigating the phagosomal pathway and what occurs inside the phagosomes and to elucidate the ultimate fate of phagocytosed aluminium particles.

  2. Dietary exposure to aluminium of urban residents from cities in South China.

    Science.gov (United States)

    Jiang, Qi; Wang, Jing; Li, Min; Liang, Xuxia; Dai, Guangwei; Hu, Zhikun; Wen, Jian; Huang, Qiong; Zhang, Yonghui

    2013-01-01

    A dietary survey was conducted over three consecutive days by using 24-hour dietary recall in the Pearl River Delta of South China to investigate the dietary consumption status. A total of 1702 food samples, 22 food groups, were collected, and aluminium concentrations of foods were determined by using ICP-MS. Weekly dietary exposure to aluminium of the average urban residents of South China was estimated to be 1.5 mg kg⁻¹ body weight, which amounted to 76% of the provisional tolerable weekly intake. Wheat-made products (53.5%) contributed most to the dietary exposure, followed by vegetables (12.2%). The high-level consumers' weekly exposure to aluminium was 11.1 mg kg⁻¹ body weight, which amounted to 407% of the provisional tolerable weekly intake. The results indicated that the general urban residents in South China might be safe from aluminium exposure, but the high-level consumers might be at some risk of aluminium exposure. The foods contributing to aluminium exposure were processed food with aluminium-containing food additives. It is necessary to take effective measures to control the overuse of aluminium-containing food additives.

  3. Insight into the cellular fate and toxicity of aluminium adjuvants used in clinically approved human vaccinations

    Science.gov (United States)

    Mold, Matthew; Shardlow, Emma; Exley, Christopher

    2016-08-01

    Aluminium adjuvants remain the most widely used and effective adjuvants in vaccination and immunotherapy. Herein, the particle size distribution (PSD) of aluminium oxyhydroxide and aluminium hydroxyphosphate adjuvants was elucidated in attempt to correlate these properties with the biological responses observed post vaccination. Heightened solubility and potentially the generation of Al3+ in the lysosomal environment were positively correlated with an increase in cell mortality in vitro, potentially generating a greater inflammatory response at the site of simulated injection. The cellular uptake of aluminium based adjuvants (ABAs) used in clinically approved vaccinations are compared to a commonly used experimental ABA, in an in vitro THP-1 cell model. Using lumogallion as a direct-fluorescent molecular probe for aluminium, complemented with transmission electron microscopy provides further insight into the morphology of internalised particulates, driven by the physicochemical variations of the ABAs investigated. We demonstrate that not all aluminium adjuvants are equal neither in terms of their physical properties nor their biological reactivity and potential toxicities both at the injection site and beyond. High loading of aluminium oxyhydroxide in the cytoplasm of THP-1 cells without immediate cytotoxicity might predispose this form of aluminium adjuvant to its subsequent transport throughout the body including access to the brain.

  4. Production and some properties of Si3N4 reinforced aluminium alloy composites

    Directory of Open Access Journals (Sweden)

    Pardeep Sharma

    2015-09-01

    Full Text Available The present research work focuses on the production of aluminium (AA6082-T6 matrix composites reinforced with various weight percentage of silicon nitride particles by conventional stir casting route. The percentage of reinforcement is varied from 0 wt.% to 12 wt.% in a stage of 3%. The microstructures and mechanical properties of the fabricated aluminium matrix composites are investigated. The scanning electron microstructure images reveal the presence of Si3N4 particles in the aluminium matrix. The distribution of Si3N4 particles has also been recognized with X-ray diffraction technique. The mechanical properties such as ultimate tensile strength and hardness have improved at the cost of reduction in ductility with increase in weight percentage of silicon nitride particulates in the aluminium metal matrix. The density and porosity of the composites also show an increasing trend with increase in volume fraction of Si3N4 particles in the aluminium matrix.

  5. Simultaneous determination of aluminium and beryllium by first-derivative synchronous solid-phase spectrofluorimetry.

    Science.gov (United States)

    Capitán, F; Manzano, E; Navalón, A; Luis Vilchez, J; Capitán-Vallvey, L F

    1992-01-01

    A method for the simultaneous determination of aluminium and beryllium in mixtures by first-deravative synchronous solid-phase spectrofluorimetry has been developed. Aluminium and beryllium reacted with morin to give fluorescent complexes, which were fixed on a dextran-type resin. The fluoresnce of the resin, packed in a 1-mm silica cell, was measured directly with a solid-surface attachment. The constant wavelength difference chosen to optimize the determination was Deltalambda = lambda(em) = 75 nm. Aluminium was measured at lambda(em)lambda = 445/520 nm and beryllium at lambda(em)lambda(em) = 430/505 nm. The range of application is between 0.5 and 5.0 ng/ml for both aluminium and beryllium. The accuracy and precision of the method are reported. The method has been successfully applied to the determination of aluminium and beryllium in synthetic mixtures and natural waters.

  6. Experimental Study on the Shock Absorption Performance of Combined Aluminium Honeycombs under Impact Loading

    Directory of Open Access Journals (Sweden)

    Lei Cao

    2015-01-01

    Full Text Available Shock absorption characteristics of combined aluminium honeycomb structures were studied experimentally. In the experiments, a testing platform was design to compare the shock absorption level of different honeycomb specimens quantitatively. The shock response curves of six test points mounted on the platform were recorded with acceleration sensors when the buffer was impacted by a bullet driven by high pressure gas. The maximum acceleration values in time domain and in specifically spectral domain were obtained based on spectral analysis. Comparing the data of combined aluminium honeycomb buffer and single aluminium honeycomb buffer, conclusion can be obtained that shock absorbing characteristic of combined aluminium honeycomb buffer is better. Furthermore, compression properties of three kinds of buffers were tested under quasi-static state. The energy absorption parameters were calculated. The results show suitable combined aluminium honeycomb buffer can smooth the stress and lower the energy applied to the testing platform.

  7. Low-temperature Electrodeposition of Aluminium from Lewis Acidic 1-Allyl-3-methylimidazolium Chloroaluminate Ionic Liquids

    Institute of Scientific and Technical Information of China (English)

    郑勇; 张锁江; 吕兴梅; 王倩; 左勇; 刘恋

    2012-01-01

    Lewis acidic 1-allyl-3-methylimidazolium chloroaluminate ionic liquids were used as promising electrolytes in the low-temperature electrodeposition of aluminium. Systematic studies on deposition process have been performed by cYClic voltammetry and chronoamperometry. The surface morphology and X-ray diffraction (XRD) patterns of deposits prepared at different experimental conditions were also investigated. It was shown that the nucleation density and growth rate of crystallites had a great effect on the structure of aluminium deposited. The crys- tallographic orientation of deposits was mainly influenced by temperature and current density. Smooth, dense and well adherent aluminium coatings were obtained on copper substrates at 10-25 mA.cm^-2 and 313.2-353.2 K. More- over, the current efficiency of deposition and purity of aluminium have been significantly improved, demonstrating that the ionic liquids tested have a prospectful potential in electroplating and electrorefining of aluminium.

  8. Slowdown of the Aluminium Capacity Expansions in China

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正> According to a senior advisor to the ChinaNonferrous Metals Techno-Economic ResearchInstitute,the Chinese Government’s efforts onthe control over the rapid development of thealuminium industry have showed their effectswith some aluminium smelters closing down in2004 and more will follow suit in 2005.According to the advisor,although China’saluminium production scale is still rather large,the central government’s efforts made on themuch heated development of the aluminiumindustry have effectively prevented it from fur-ther growing.He believes that the primary

  9. Persistent Skin Reactions and Aluminium Hypersensitivity Induced by Childhood Vaccines

    DEFF Research Database (Denmark)

    Salik, Elaha; Løvik, Ida; Andersen, Klaus E

    2016-01-01

    period 2003 to 2013 we identified 47 children with persistent skin reactions caused by childhood vaccinations. Most patients had a typical presentation of persisting pruritic subcutaneous nodules. Five children had a complex diagnostic process involving paediatricians, orthopaedics and plastic surgeons......There is increasing awareness of reactions to vaccination that include persistent skin reactions. We present here a retrospective investigation of long-lasting skin reactions and aluminium hypersensitivity in children, based on medical records and questionnaires sent to the parents. In the 10-year...... treated with potent topical corticosteroids and disappeared slowly. Although we advised families to continue vaccination of their children, one-third of parents omitted or postponed further vaccinations....

  10. Design considerations for HFQ® hot stamped aluminium structural panels

    Directory of Open Access Journals (Sweden)

    Foster Alistair

    2015-01-01

    Full Text Available HFQ is a deep drawing process for alloyed aluminium sheet that can be used to produce complex-stamped forms while maintaining the high-strength of 6xxx and 7xxx alloys. By adopting a strategy to design for HFQ at the platform level, designers can reduce part count (thereby reducing cost and weight, reduce gauge (thereby reducing weight, and improve part packaging. Two simple design examples are given to assist designers in evolving traditionally formed panel designs to HFQ formed solutions. Example features are used to illustrate the effect of geometry, thickness and strength on the final structural component.

  11. Spectrum Simulation of Li-Like Aluminium Plasma

    Institute of Scientific and Technical Information of China (English)

    PENG Feng; JIANG Gang; ZHU Zheng-He

    2006-01-01

    X-ray emission spectra for L-shell of Li-like aluminium ions are simulated by using the flexible atomic code based on the collisional radiative model. Atomic processes including radiative recombination, dielectronic recombination, collisional ionization and resonance excitation from the neighbouring ion (Al9+ and Al11+) charge states of the target ion (Al10+) are considered in the model. In addition, the contributions of different atomic processes to the x-ray spectrum are analysed. The results show that dielectronic recombination, radiative recombination, collisional ionization and resonance excitation, other than direct collisional excitation, are very important processes.

  12. The Adsorption of NOx on Magnesium Aluminium Hydrotalcite

    Institute of Scientific and Technical Information of China (English)

    Zhe Ming NI; Wei Hua YU; Shao Fen ZHAO; Zhong Hua GE

    2004-01-01

    Magnesium aluminium hydrotalcite (Mg-Al-HT) with molar ratio of Mg-to-Al of 3 to 1 was prepared and characterized by X-ray diffraction (XRD) and infrared spectra (IR).The performances of Mg-Al-HT for the adsorption and desorption of NOx were studied.The results indicated that the adsorption capacity of the hydrotalcite for NOx was 1398.2 mg/g, and it was higher than the acticarbon's.The adsorption capacities depended on adsorption time and temperature.Mg-Al-HT could be regenerated by thermal decomposition, and the adsorption efficiency had not changed markedly after three cycles.

  13. Physical model of aluminium refining process in URC-7000

    Directory of Open Access Journals (Sweden)

    M. Saternus

    2009-07-01

    Full Text Available The paper presents short characteristics of the most frequently used reactors for the continuous refining of aluminium and its alloys. Refining depends on the flow rate of refining gas. It influences the shape and size of gas bubbles. So the physical model was created to determine the level of gas bubble dispersion in liquids. Schemes of gas dispersion in liquid metal were presented taking into consideration that the gas flow rate is changing from 2 to 30 dm3/min. The range selection of the flow rate of refining gas value for five patterns of the dispersion (no dispersion, minimum, intimate, uniform and overdispersion was also done.

  14. Optically Designed Anodised Aluminium Surfaces: Microstructural and Electrochemical Aspects

    DEFF Research Database (Denmark)

    Gudla, Visweswara Chakravarthy

    under high frequency anodising, highly reflecting, bright and glossy white anodised aluminium surfaces were generated for the first time. Further, these white anodised surfaces were conventionally dyed to generate new appearances based on pastel colours. The work presented in this thesis is mainly......-13). The outcome of the work is presented in the last chapter (Chapter 15). The results from white anodising of the Al surfaces, which is the primary goal of this thesis and also the generation of a new set of pastel coloured anodised surfaces is presented. The optical characterization of these white anodised...

  15. The effect of atmospheric corona treatment on AA1050 aluminium

    DEFF Research Database (Denmark)

    Jariyaboon, Manthana; Møller, Per; Dunin-Borkowski, Rafal E.

    2010-01-01

    The effect of atmospheric corona discharge on AM 050 aluminium surface was investigated using electrochemical polarization, SEM-EDX, FIB-SEM. and XPS. The corona treatment was performed with varying time (1, 5, and 15 min) in atmospheric air. A 200 nm oxide layer was generated on AA1050 after...... the 15 min air corona treatment. A significant reduction in anodic and cathodic reactivities was observed starting from 1 min exposure, which further decreased with prolonged exposure (15 min) and after delayed testing (after 30 days). The reduction in surface reactivity is due to the formation...

  16. Large aluminium wire spark chambers with magnetostrictive read-out

    CERN Document Server

    Bradamante, Franco; Daum, C; Dechelette, Paul; Fidecaro, Giuseppe; Fidecaro, Maria; Giorgi, M; Penzo, Aldo L; Piemontese, L; Renevey, Max; Schiavon, Paolo; Vascotto, Alessandro

    1974-01-01

    A set of 1 cm gap wire spark chambers with a sensitive surface of 300 * 100 cm/sup 2/ was constructed for an experiment at the CERN proton synchrotron. The Coulomb scattering was limited by using aluminium wires and by adopting a crossed-wire configuration, which allowed us to minimize the number of chambers for a given number of pairs of coordinates. The wire planes were pulsed by feeding the high voltage from strip-lines along the whole boundary of the chambers. (7 refs).

  17. Foaming of aluminium-silicon alloy using concentrated solar energy

    Energy Technology Data Exchange (ETDEWEB)

    Cambronero, L.E.G.; Ruiz-Roman, J.M. [Grupo de Materiales Hibridos, ETSIM-UPM, Madrid, Rios Rosas 21, 28003 Madrid (Spain); Canadas, I.; Martinez, D. [Plataforma Solar de Almeria, CIEMAT, P.O. Box 22, 04200 Tabernas (Almeria) (Spain)

    2010-06-15

    Solar energy is used for the work reported here as a nonconventional heating system to produce aluminium foam from Al-Si alloy precursors produced by powder metallurgy. A commercial precursor in cylindrical bars enclosed in a stainless-steel mould was heated under concentrated solar radiation in a solar furnace with varied heating conditions (heating rate, time, and temperature). Concentrated solar energy close to 300 W/cm{sup 2} on the mould is high enough to achieve complete foaming after heating for only 200 s. Under these conditions, the density and pore distribution in the foam change depending on the solar heating parameters and mould design. (author)

  18. Skin telangiectasia in workers of an aluminium processing plant.

    Science.gov (United States)

    Balić, J; Kansky, A

    1988-01-01

    Telangiectases were detected in 57 (46.7%) of 122 workers employed at the electrolysis department of the aluminium plant Lozovac/Sibenik, Yugoslavia. Of 116 workers employed in the smeltery of the same plant, telangiectases were observed in 19 persons (16.4%) and in a group of 121 public transportation workers from Sibenik 15 men (12.4%) displayed enlarged blood vessels. Statistical evaluation revealed the difference in number between workers showing telangiectases engaged in electrolysis and the other two samples to be significant. It may be assumed that telangiectases were caused by hydrogen fluoride and other fluorides. Further clinical parameters, as well as working conditions, are reviewed.

  19. Release Behaviour of Shock Loaded LY12 Aluminium Alloy

    Institute of Scientific and Technical Information of China (English)

    YAN Min; DAI Lan-Hong; SHEN Le-Tian

    2005-01-01

    @@ By making use of a light gas gun, a specially designed target is impacted by the LY12 flyer, and the pressure is taken in the range of 0.6-3 GPa. Based on the stress profiles measured in the buffer materials by manganese gauges, the Hugoniot curve and release curves of LY12 aluminium alloy are obtained. Meanwhile, the release curves from different initial shocked states are described in both the pressure-particle velocity plane and the pressure-specific volume plane.

  20. Role of acidic chemistries in steam treatment of aluminium alloys

    DEFF Research Database (Denmark)

    Din, Rameez Ud; Jellesen, Morten Stendahl; Ambat, Rajan

    2015-01-01

    The effect of acidic chemistry on the accelerated growth of oxide on aluminium alloys Peraluman 706TM and AA6060 under exposure to high temperature steam was investigated. Studied chemistries were based on citrates and phosphates. Results showed that the presence of citrate and phosphate anions...... initiate doxide growth at the intermetallic particles while growth and corrosion performance of oxide was found tobe a function of anions type and their concentration. Further, steam treatment with phosphates exhibited better performance under acetic acid salt spray and filiform corrosion test whereas...

  1. Characterisation of austempered spheroidal graphite aluminium cast iron

    Energy Technology Data Exchange (ETDEWEB)

    Boutorabi, S.M.A. [Iran Univ. of Science and Technology, Tehran (Iran, Islamic Republic of). Dept. of Metallurgy and Materials

    1997-06-01

    The micro constituents of austempered spheroidal graphite aluminium cast iron were investigated. The heat tinting, special etching and microhardness measurement techniques were used. The results showed that the colour of each micro constituents and the hardness values in austempered ductile iron depend on the carbon content of each phase. The above techniques were supported by using an special etching which showed similar differences in each phase. It was shown that the heat tinting and special etching are reliable tools to characterise the complex matrix of ADI. The microhardness data supported interestingly the colour changes in above technique. (orig.)

  2. The fracture of boron fibre-reinforced 6061 aluminium alloy

    Science.gov (United States)

    Wright, M. A.; Welch, D.; Jollay, J.

    1979-01-01

    The fracture of 6061 aluminium alloy reinforced with unidirectional and cross-plied 0/90 deg, 0/90/+ or - 45 deg boron fibres has been investigated. The results have been described in terms of a critical stress intensity, K(Q). Critical stress intensity factors were obtained by substituting the failure stress and the initial crack length into the appropriate expression for K(Q). Values were obtained that depended on the dimensions of the specimens. It was therefore concluded that, for the size of specimen tested, the values of K(Q) did not reflect any basic materials property.

  3. Wear characteristics of a rheocast leaded aluminium metal - metal composite

    Energy Technology Data Exchange (ETDEWEB)

    Garg, R. (Roorkee Univ. (India). Dept. of Metallurgical Engineering); Mohan, S. (Banaras Hindu Univ., Varanasi (India). Dept. of Metallurgical Engineering); Agarwala, V. (Roorkee Univ. (India). Dept. of Metallurgical Engineering); Agarwala, R.C. (Roorkee Univ. (India). Dept. of Metallurgical Engineering)

    1993-10-01

    In Al-Pb alloys, boundary lubrication is provided by lead but the matrix with pure aluminium does not provide adequate strength at high loads and high sliding velocities. So in the present investigation an Al-Cu-Si alloy has been taken as the base material and lead has been incorporated by the rheocasting technique. Wear characteristics of the alloy have been investigated at different loads, sliding velocities and sliding distances. Bulk wear has been observed to increase almost linearly with applied load and sliding velocity, but with sliding distance the bulk wear shows a short period of running-in followed by a long steady-state wear. (orig.)

  4. Outstanding inhibitive effect of colchicine on aluminium alloy 6061 corrosion

    Directory of Open Access Journals (Sweden)

    Mudigere Krishnegowda Pavithra

    2015-12-01

    Full Text Available The corrosion protection ability of colchicine (CC on Aluminium alloy 6061 (AA6061 in 3.5% NaCl medium was examined by potentiodynamic polarization, electrochemical impedance, and chronoamperometric techniques. About 99 % of protection efficiency was achieved by 2 mM concentration of CC in 3.5% NaCl solution.The adsorption of CC on AA6061 surface obeys Langmuir isotherm by following both physisorption and chemisorption mechanism. Variation in the surface morphology of inhibited and uninhibited metal samples was examined by scanning electron microscopy. 

  5. 32 CFR 32.46 - Procurement records.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Procurement records. 32.46 Section 32.46..., HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Procurement Standards § 32.46 Procurement records. Procurement records and files for purchases in excess of the simplified...

  6. 32 CFR 989.32 - Noise.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Noise. 989.32 Section 989.32 National Defense... ANALYSIS PROCESS (EIAP) § 989.32 Noise. Aircraft noise data files used for analysis during EIAP will be... System for Aircraft Noise for military training routes and military operating areas. Guidance...

  7. 32 CFR 651.32 - Introduction.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Introduction. 651.32 Section 651.32 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) ENVIRONMENTAL QUALITY ENVIRONMENTAL ANALYSIS OF ARMY ACTIONS (AR 200-2) Environmental Assessment § 651.32 Introduction. (a) An EA...

  8. 32 CFR 32.43 - Competition.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Competition. 32.43 Section 32.43 National... NON-PROFIT ORGANIZATIONS Post-Award Requirements Procurement Standards § 32.43 Competition. All... free competition. The recipient shall be alert to organizational conflicts of interest as well...

  9. 32 CFR 32.52 - Financial reporting.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Financial reporting. 32.52 Section 32.52..., HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Reports and Records § 32.52 Financial reporting. (a) The following forms or such other forms as may be approved by OMB are authorized...

  10. 32 CFR 32.48 - Contract provisions.

    Science.gov (United States)

    2010-07-01

    ... a contractor violates or breaches the contract terms, and provide for such remedial actions as may... 32 National Defense 1 2010-07-01 2010-07-01 false Contract provisions. 32.48 Section 32.48..., HOSPITALS, AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Procurement Standards § 32.48...

  11. A 3D printed superconducting aluminium microwave cavity

    Science.gov (United States)

    Creedon, Daniel L.; Goryachev, Maxim; Kostylev, Nikita; Sercombe, Timothy B.; Tobar, Michael E.

    2016-07-01

    3D printing of plastics, ceramics, and metals has existed for several decades and has revolutionized many areas of manufacturing and science. Printing of metals, in particular, has found a number of applications in fields as diverse as customized medical implants, jet engine bearings, and rapid prototyping in the automotive industry. Although many techniques are used for 3D printing metals, they commonly rely on computer controlled melting or sintering of a metal alloy powder using a laser or electron beam. The mechanical properties of parts produced in such a way have been well studied, but little attention has been paid to their electrical properties. Here we show that a microwave cavity (resonant frequencies 9.9 and 11.2 GHz) 3D printed using an Al-12Si alloy exhibits superconductivity when cooled below the critical temperature of aluminium (1.2 K), with a performance comparable with the common 6061 alloy of aluminium. Superconducting cavities find application in numerous areas of physics, from particle accelerators to cavity quantum electrodynamics experiments. The result is achieved even with a very large concentration of non-superconducting silicon in the alloy of 12.18%, compared with Al-6061, which has between 0.4% and 0.8%. Our results may pave the way for the possibility of 3D printing superconducting cavity configurations that are otherwise impossible to machine.

  12. A 3D Printed Superconducting Aluminium Microwave Cavity

    CERN Document Server

    Creedon, Daniel L; Kostylev, Nikita; Sercombe, Tim; Tobar, Michael E

    2016-01-01

    3D printing of plastics, ceramics, and metals has existed for several decades and has revolutionized many areas of manufacturing and science. Printing of metals in particular has found a number of novel applications in fields as diverse as customized medical implants, jet engine bearings, and rapid prototyping in the automotive industry. Whilst many techniques can be used for 3D printing metals, they commonly rely on computer controlled melting or sintering of a metal alloy powder using a laser or electron beam. The mechanical properties of parts produced in such a way have been well studied, but little attention has been paid to their electrical properties. Here we show that a resonant microwave cavity 3D printed using an Al-12Si alloy exhibits superconductivity when cooled below the critical temperature of aluminium (1.2 K), with a performance comparable to the common 6061 alloy of aluminium. Superconducting cavities find application in numerous areas of physics, from particle accelerators to cavity quantum...

  13. Experimental study of aluminium honeycomb behaviour under dynamic multiaxial loading

    Directory of Open Access Journals (Sweden)

    Markiewicz E.

    2012-08-01

    Full Text Available Split Hopkinson Pressure Bar system (SHPB with large-diameter and Nylon bars introducing a shear-compression loading device is used in order to investigate the dynamic behaviour of aluminium honeycomb under multiaxial loadings conditions. All shear-compression configurations including the loading angle variation from 0∘ to 60∘ are performed with an impact velocity of about 15m/s. The adapted SHPB system with the device are validated numerically and a phenomenon of separation between the input bar and the input beveled bar is observed. Numerical results suggest that this phenomenon provides a cutting of the reflected wave. An electro optical extensometer is employed in experiments. A good agreement between the numerical elastic waves and the experimental ones is obtained. Experimental results show a significant effect of the loading angle on the apparent stress-strain curves. The initial peak value and the plateau stress decrease with the increase of the loading angle. The combined shear-compression device with an enhancement at the alignment set-up provides efficient results for samples dynamically loaded. This device will be used to investigate the influence of the in-plane orientation angle on the deformation mechanisms and multiaxial behaviour of aluminium honeycomb under dynamic and quasi-static loading conditions.

  14. Aluminium-oxide wires for superconducting high kinetic inductance circuits

    Science.gov (United States)

    Rotzinger, H.; Skacel, S. T.; Pfirrmann, M.; Voss, J. N.; Münzberg, J.; Probst, S.; Bushev, P.; Weides, M. P.; Ustinov, A. V.; Mooij, J. E.

    2017-02-01

    We investigate thin films of conducting aluminium-oxide, also known as granular aluminium, as a material for superconducting high quality, high kinetic inductance circuits. The films are deposited by an optimised reactive DC magnetron sputter process and characterised using microwave measurement techniques at milli-Kelvin temperatures. We show that, by precise control of the reactive sputter conditions, a high room temperature sheet resistance and therefore high kinetic inductance at low temperatures can be obtained. For a coplanar waveguide resonator with 1.5 kΩ sheet resistance and a kinetic inductance fraction close to unity, we measure a quality factor in the order of 700 000 at 20 mK. Furthermore, we observe a sheet resistance reduction by gentle heat treatment in air. This behaviour is exploited to study the kinetic inductance change using the microwave response of a coplanar wave guide resonator. We find the correlation between the kinetic inductance and the sheet resistance to be in good agreement with theoretical expectations.

  15. Controlling interferometric properties of nanoporous anodic aluminium oxide.

    Science.gov (United States)

    Kumeria, Tushar; Losic, Dusan

    2012-01-26

    A study of reflective interference spectroscopy [RIfS] properties of nanoporous anodic aluminium oxide [AAO] with the aim to develop a reliable substrate for label-free optical biosensing is presented. The influence of structural parameters of AAO including pore diameters, inter-pore distance, pore length, and surface modification by deposition of Au, Ag, Cr, Pt, Ni, and TiO2 on the RIfS signal (Fabry-Perot fringe) was explored. AAO with controlled pore dimensions was prepared by electrochemical anodization of aluminium using 0.3 M oxalic acid at different voltages (30 to 70 V) and anodization times (10 to 60 min). Results show the strong influence of pore structures and surface modifications on the interference signal and indicate the importance of optimisation of AAO pore structures for RIfS sensing. The pore length/pore diameter aspect ratio of AAO was identified as a suitable parameter to tune interferometric properties of AAO. Finally, the application of AAO with optimised pore structures for sensing of a surface binding reaction of alkanethiols (mercaptoundecanoic acid) on gold surface is demonstrated.

  16. Geopolymerisation of fly ashes with waste aluminium anodising etching solutions.

    Science.gov (United States)

    Ogundiran, M B; Nugteren, H W; Witkamp, G J

    2016-10-01

    Combined management of coal combustion fly ash and waste aluminium anodising etching solutions using geopolymerisation presents economic and environmental benefits. The possibility of using waste aluminium anodising etching solution (AES) as activator to produce fly ash geopolymers in place of the commonly used silicate solutions was explored in this study. Geopolymerisation capacities of five European fly ashes with AES and the leaching of elements from their corresponding geopolymers were studied. Conventional commercial potassium silicate activator-based geopolymers were used as a reference. The geopolymers produced were subjected to physical, mechanical and leaching tests. The leaching of elements was tested on 28 days cured and crushed geopolymers using NEN 12457-4, NEN 7375, SPLP and TCLP leaching tests. After 28 days ambient curing, the geopolymers based on the etching solution activator showed compressive strength values between 51 and 84 MPa, whereas the commercial potassium silicate based geopolymers gave compressive strength values between 89 and 115 MPa. Based on the regulatory limits currently associated with the used leaching tests, all except one of the produced geopolymers (with above threshold leaching of As and Se) passed the recommended limits. The AES-geopolymer geopolymers demonstrated excellent compressive strength, although less than geopolymers made from commercial activator. Additionally, they demonstrated low element leaching potentials and therefore can be suitable for use in construction works.

  17. Cancellous bone homograft storage with aluminium-polyethylene bags.

    Science.gov (United States)

    Meana, A; Martinez, R; Cañal, P; Arriaga, M J; Román, F San; Llames, S; Orós, C; Moreno, A; Fernandez, C

    2006-01-01

    In order to transport and cryopreserve human tissues, it is essential to have an easy-to-use recipient where tissues can be kept in sterile conditions. Here we show the results obtained by using Macopharma's tissue freezing bags, an aluminium-polyethylene multilayer bag, in our tissue bank of the Centro Comunitario de Sangre y Tejidos de Asturias. Five hundred and twenty-seven cancellous bone homografts were obtained from hospitals located 120 km around our Bank. The homografts were submitted to bacteriological controls and sent to our bank in these bags. They were stored at -70 degrees C and sent in dry ice to about 50 hospitals, where the tissue was bacteriologically controlled and grafted. Furthermore, the behaviour of these bags at -140 degrees C (vapour nitrogen) or -196 degrees C (liquid nitrogen) was tested. Our results indicate that Macopharma aluminium-polyethylene bags are suitable for the transporting and cryopreserving of cancellous bone homografts. These bags could also be used for keeping tissues in nitrogen containers.

  18. Aluminium surface treatment with ceramic phases using diode laser

    Science.gov (United States)

    Labisz, K.; Tański, T.; Brytan, Z.; Pakieła, W.; Wiśniowski, M.

    2016-07-01

    Ceramic particles powder feeding into surface layer of engineering metal alloy is a well-known and widely used technique. New approach into the topic is to obtain finely distributed nano-sized particles involved in the aluminium matrix using the traditional laser technology. In this paper are presented results of microstructure investigation of cast aluminium-silicon-copper alloys surface layer after heat treatment and alloying with ceramic carbides of WC and ZrO2 using high-power diode laser. The surface layer was specially prepared for the reason of reducing the reflectivity, which is the main problem in the up-to-date metal matrix composites production. With scanning electron microscopy, it was possible to determine the deformation process and distribution of WC and ZrO2 ceramic powder phase. Structure of the surface after laser treatment changes, revealing three zones—remelting zone, heat-affected zone and transition zone placed over the Al substrate. The structural changes of ceramic powder, its distribution and morphology as well as microstructure of the matrix material influence on functional properties, especially wear resistance and hardness of the achieved layer, were investigated.

  19. Downscaled anodic oxidation process for aluminium in oxalic acid

    Science.gov (United States)

    Sieber, M.; Morgenstern, R.; Kuhn, D.; Hackert-Oschätzchen, M.; Schubert, A.; Lampke, T.

    2017-03-01

    The increasing multi-functionality of parts and assemblies in several fields of engineering demands, amongst others, highly functionalised surfaces. For the different applications, on the one hand, there is a need to scale up surface modification processes originating in the nano- and micro-scale. On the other hand, conventional macro-scale surface refinement methods offer a huge potential for application in the said nano- and micro-scale. The anodic oxidation process, which is established especially for aluminium and its alloys, allows the formation of oxide ceramic layers on the surface. The build-up of an oxide ceramic coating comes along with altered chemical, tribological and electrical surface properties. As a basis for further investigations regarding the use of the anodic oxidation process for micro-scale-manufacturing, the scale effects of oxalic acid anodising on commercially pure aluminium as well as on the AlZn5.5MgCu alloy are addressed in the present work. The focus is on the amount of oxide formed during a potentiostatic process in relation to the exchanged amount of charge. Further, the hardness of the coating as an integral measure to assess the porous oxide structure is approached by nano-indentation technique.

  20. Experimental study of friction in aluminium bolted joints

    Science.gov (United States)

    Croccolo, D.; de Agostinis, M.; Vincenzi, N.

    2010-06-01

    This study aims at developing an experimental tool useful to define accurately the friction coefficients in bolted joints and, therefore, at relating precisely the tightening torque to the bolt preloading force in some special components used in front motorbike suspensions. The components under investigation are some clamped joints made of aluminium alloy. The preloading force is achieved by applying a torque wrench to the bolt head. Some specific specimens have been appropriately designed and realized in order to study the tribological aspects of the tightening phase. Experimental tests have been performed by applying the Design of Experiment (DOE) method in order to obtain a mathematical model for the friction coefficients. Three replicas of a full factorial DOE at two levels for each variable have been carried out. The levels include cast versus forged aluminium alloy, anodized versus spray-painted surface, lubricated versus unlubricated screw, and first tightening (fresh unspoiled surfaces) versus sixth tightening (spoiled surfaces). The study considers M8x1.25 8.8 galvanized screws.

  1. Continuous flow analysis method for determination of soluble iron and aluminium in ice cores.

    Science.gov (United States)

    Spolaor, A; Vallelonga, P; Gabrieli, J; Roman, M; Barbante, C

    2013-01-01

    Iron and aluminium are the two most abundant metals on the Earth's crust, but they display quite different biogeochemical properties. While iron is essential to many biological processes, aluminium has not been found to have any biological function at all. In environmental studies, iron has been studied in detail for its limiting role in the bioproductivity of high nutrient, low carbon oceanic zones, while aluminium is routinely used as a reference of crustal contributions to atmospheric deposition archives including peat bogs, lacustrine and marine sediments and ice sheets and glaciers. We report here the development of a flow injection analysis technique, which has been optimised for the simultaneous determination of soluble iron and aluminium in polar ice cores. Iron was determined by its catalytic role in the reduction of N,N-dimethyl-p-phenylenediamene (DPD) to a semiquinonic form (DPDQ) and subsequent absorption spectroscopy at 514 nm. Aluminium was determined by spectroscopic analysis of an aluminium-lumogallion complex that exhibits fluorescence at 560 nm. These techniques have been applied to a section of Greenland ice dated to 1729-1733 AD and indicate that volcanism is a source of highly soluble aluminium and iron.

  2. Derivation of a water quality guideline for aluminium in marine waters.

    Science.gov (United States)

    Golding, Lisa A; Angel, Brad M; Batley, Graeme E; Apte, Simon C; Krassoi, Rick; Doyle, Chris J

    2015-01-01

    Metal risk assessment of industrialized harbors and coastal marine waters requires the application of robust water quality guidelines to determine the likelihood of biological impacts. Currently there is no such guideline available for aluminium in marine waters. A water quality guideline of 24 µg total Al/L has been developed for aluminium in marine waters based on chronic 10% inhibition or effect concentrations (IC10 or EC10) and no-observed-effect concentrations (NOECs) from 11 species (2 literature values and 9 species tested including temperate and tropical species) representing 6 taxonomic groups. The 3 most sensitive species tested were a diatom Ceratoneis closterium (formerly Nitzschia closterium; IC10 = 18 µg Al/L, 72-h growth rate inhibition) aluminium forms of aluminate (Al(OH4 (-) ) and aluminium hydroxide (Al(OH)3 (0) ) although both dissolved, and particulate aluminium contributed to toxicity in the diatom Minutocellus polymorphus and green alga Dunaliella tertiolecta. In contrast, aluminium toxicity to the green flagellate alga Tetraselmis sp. was the result of particulate aluminium only. Four species, a brown macroalga (Hormosira banksii), sea urchin embryo (Heliocidaris tuberculata), and 2 juvenile fish species (Lates calcarifer and Acanthochromis polyacanthus), were not adversely affected at the highest test concentration used.

  3. Factors affecting the aluminium content of human femoral head and neck.

    Science.gov (United States)

    Zioła-Frankowska, Anetta; Dąbrowski, Mikołaj; Kubaszewski, Łukasz; Rogala, Piotr; Frankowski, Marcin

    2015-11-01

    Tissues for the study were obtained intraoperatively during hip replacement procedures from 96 patients. In all the cases, the indication for this treatment was primary or secondary degenerative changes in the hip joint. The subject of the study was the head and neck of the femur, resected in situ. Aluminium concentrations measured in femoral head and neck samples from patients aged between 25 and 91 were varied. Statistical methods were applied to determine the variations in relation to the parameters from the background survey. Significant differences in the aluminium content of femoral head samples were observed between patients under and over 60 years of age. Based on the results, it was confirmed that the aluminium accumulates in bones over a lifetime. The study showed that the content of aluminium in the head and neck of the femur depends on the factors such as: type of medicines taken, contact with chemicals at work, differences in body anatomy and sex. The study on the levels of aluminium in bones and the factors affecting its concentration is a valuable source of information for further research on the role of aluminium in bone diseases. Based on the investigations, it was found that the GF-AAS technique is the best analytical tool for routine analysis of aluminium in complex matrix samples. The use of femoral heads in the investigations was approved by the Bioethics Committee of the University of Medical Sciences in Poznań (Poland).

  4. Aluminium adjuvants and adverse events in sub-cutaneous allergy immunotherapy.

    Science.gov (United States)

    Exley, Christopher

    2014-01-20

    Sub-cutaneous immunotherapy is an effective treatment for allergy. It works by helping to modify or re-balance an individual's immune response to allergens and its efficacy is greatly improved by the use of adjuvants, most commonly, aluminium hydroxide. Aluminium salts have been used in allergy therapy for many decades and are assumed to be safe with few established side-effects. This assumption belies their potency as adjuvants and their potential for biological reactivity both at injection sites and elsewhere in the body. There are very few data purporting to the safety of aluminium adjuvants in allergy immunotherapy and particularly so in relation to longer term health effects. There are, if only few, published reports of adverse events following allergy immunotherapy and aluminium adjuvants are the prime suspects in the majority of such incidents. Aluminium adjuvants are clearly capable of initiating unwanted side effects in recipients of immunotherapy and while there is as yet no evidence that such are commonplace it is complacent to consider aluminium salts as harmless constituents of allergy therapies. Future research should establish the safety of the use of aluminium adjuvants in sub-cutaneous allergy immunotherapy.

  5. Aluminium exposure from parenteral nutrition in preterm infants and later health outcomes during childhood and adolescence.

    Science.gov (United States)

    Fewtrell, Mary S; Edmonds, Caroline J; Isaacs, Elizabeth; Bishop, Nick J; Lucas, Alan

    2011-08-01

    Aluminium is the most common metallic element, but has no known biological role. It accumulates in the body when protective gastrointestinal mechanisms are bypassed, renal function is impaired, or exposure is high - all of which apply frequently to preterm infants. Recognised clinical manifestations of aluminium toxicity include dementia, anaemia and bone disease. Parenteral nutrition (PN) solutions are liable to contamination with aluminium, particularly from acidic solutions in glass vials, notably calcium gluconate. When fed parenterally, infants retain >75% of the aluminium, with high serum, urine and tissue levels. Later health effects of neonatal intravenous aluminium exposure were investigated in a randomised trial comparing standard PN solutions with solutions specially sourced for low aluminium content. Preterm infants exposed for >10 d to standard solutions had impaired neurologic development at 18 months. At 13-15 years, subjects randomised to standard PN had lower lumbar spine bone mass; and, in non-randomised analyses, those with neonatal aluminium intake above the median had lower hip bone mass. Given the sizeable number of infants undergoing intensive care and still exposed to aluminium via PN, these findings have contemporary relevance. Until recently, little progress had been made on reducing aluminium exposure, and meeting Food and Drug Administration recommendations (<5 μg/kg per d) has been impossible in patients <50 kg using available products. Recent advice from the UK Medicines and Healthcare regulatory Authority that calcium gluconate in small volume glass containers should not be used for repeated treatment in children <18 years, including preparation of PN, is an important step towards addressing this problem.

  6. Chemical mimicking of bio-assisted aluminium extraction by Aspergillus niger's exometabolites.

    Science.gov (United States)

    Boriová, Katarína; Urík, Martin; Bujdoš, Marek; Pifková, Ivana; Matúš, Peter

    2016-11-01

    Presence of microorganisms in soils strongly affects mobility of metals. This fact is often excluded when mobile metal fraction in soil is studied using extraction procedures. Thus, the first objective of this paper was to evaluate strain Aspergillus niger's exometabolites contribution on aluminium mobilization. Fungal exudates collected in various time intervals during cultivation were analyzed and used for two-step bio-assisted extraction of alumina and gibbsite. Oxalic, citric and gluconic acids were identified in collected culture media with concentrations up to 68.4, 2.0 and 16.5 mmol L(-1), respectively. These exometabolites proved to be the most efficient agents in mobile aluminium fraction extraction with aluminium extraction efficiency reaching almost 2.2%. However, fungal cultivation is time demanding process. Therefore, the second objective was to simplify acquisition of equally efficient extracting agent by chemically mimicking composition of main organic acid components of fungal exudates. This was successfully achieved with organic acids mixture prepared according to medium composition collected on the 12th day of Aspergillus niger cultivation. This mixture extracted similar amounts of aluminium from alumina compared to culture medium. The aluminium extraction efficiency from gibbsite by organic acids mixture was lesser than 0.09% which is most likely because of more rigid mineral structure of gibbsite compared to alumina. The prepared organic acid mixture was then successfully applied for aluminium extraction from soil samples and compared to standard single step extraction techniques. This showed there is at least 2.9 times higher content of mobile aluminium fraction in soils than it was previously considered, if contribution of microbial metabolites is considered in extraction procedures. Thus, our contribution highlights the significance of fungal metabolites in aluminium extraction from environmental samples, but it also simplifies the

  7. Cobalt and Nickel Nanopillars on Aluminium Substrates by Direct Current Electrodeposition Process

    Directory of Open Access Journals (Sweden)

    Santos A

    2009-01-01

    Full Text Available Abstract A fast and cost-effective technique is applied for fabricating cobalt and nickel nanopillars on aluminium substrates. By applying an electrochemical process, the aluminium oxide barrier layer is removed from the pore bottom tips of nanoporous anodic alumina templates. So, cobalt and nickel nanopillars are fabricated into these templates by DC electrodeposition. The resulting nanostructure remains on the aluminium substrate. In this way, this method could be used to fabricate a wide range of nanostructures which could be integrated in new nanodevices.

  8. Car-Parrinello Simulation of the Aluminium Oxidation: Questioning the Role of 'Hot Adatoms'

    CERN Document Server

    Schulte, Marius

    2012-01-01

    We present Car-Parrinello molecular dynamics simulations of the initial reaction steps leading to an inert oxide layer on aluminium. The mechanism of the reaction of the aluminium surface with single oxygen molecules is analysed. After adsorption at the surface the oxygen molecules dissociate at a femtosecond timescale and the atoms are chemisorbed at the surface at a distance of several angstrom which falsifies earlier STM results. When the aluminium surface is exposed to higher oxygen pressure, a surface layer essentially consisting of threefold coordinated oxygen atoms starts to form.

  9. Laser-Doping through Anodic Aluminium Oxide Layers for Silicon Solar Cells

    OpenAIRE

    2015-01-01

    This paper demonstrates that silicon can be locally doped with aluminium to form localised p+ surface regions by laser-doping through anodic aluminium oxide (AAO) layers formed on the silicon surface. The resulting p+ regions can extend more than 10 μm into the silicon and the electrically active p-type dopant concentration exceeds 1020 cm−3 for the first 6-7 μm of the formed p+ region. Anodic aluminium oxide layers can be doped with other impurities, such as boron and phosphorus, by anodisin...

  10. Advanced rechargeable aluminium ion battery with a high-quality natural graphite cathode

    OpenAIRE

    Wang, Di-Yan; Wei, Chuan-yu; Lin, Meng-Chang; Pan, Chun-Jern; Chou, Hung-Lung; Chen, Hsin-An; Gong, Ming; Wu, Yingpeng; Yuan, Chunze; Angell, Michael; Hsieh, Yu-Ju; Chen, Yu-Hsun; Wen, Cheng-Yen; Chen, Chun-Wei; Hwang, Bing-Joe

    2017-01-01

    Recently, interest in aluminium ion batteries with aluminium anodes, graphite cathodes and ionic liquid electrolytes has increased; however, much remains to be done to increase the cathode capacity and to understand details of the anion–graphite intercalation mechanism. Here, an aluminium ion battery cell made using pristine natural graphite flakes achieves a specific capacity of ∼110 mAh g−1 with Coulombic efficiency ∼98%, at a current density of 99 mA g−1 (0.9 C) with clear discharge voltag...

  11. Inhibition of Aluminium Corrosion in Hydrochloric Acid Using Nizoral and the Effect of Iodide Ion Addition

    Directory of Open Access Journals (Sweden)

    I. B. Obot

    2010-01-01

    Full Text Available The effect of nizoral (NZR on the corrosion inhibition of aluminium alloy AA 1060 in 2 M HCl solution was investigated using the mylius thermometric technique. Results of the study revealed that nizoral acts as corrosion inhibitor for aluminium in the acidic medium. In general, at constant acid concentration, the inhibition efficiency increases with increase in the inhibitor concentration. The addition of KI to the inhibitor enhanced the inhibition efficiency to a considerable extent. The adsorption of nizoral onto the aluminium surface was found to obey the Fruendlich adsorption isotherm. The value of the free energy for the adsorption process shows that the process is spontaneous.

  12. The aluminium content of breast tissue taken from women with breast cancer.

    Science.gov (United States)

    House, Emily; Polwart, Anthony; Darbre, Philippa; Barr, Lester; Metaxas, George; Exley, Christopher

    2013-10-01

    The aetiology of breast cancer is multifactorial. While there are known genetic predispositions to the disease it is probable that environmental factors are also involved. Recent research has demonstrated a regionally specific distribution of aluminium in breast tissue mastectomies while other work has suggested mechanisms whereby breast tissue aluminium might contribute towards the aetiology of breast cancer. We have looked to develop microwave digestion combined with a new form of graphite furnace atomic absorption spectrometry as a precise, accurate and reproducible method for the measurement of aluminium in breast tissue biopsies. We have used this method to test the thesis that there is a regional distribution of aluminium across the breast in women with breast cancer. Microwave digestion of whole breast tissue samples resulted in clear homogenous digests perfectly suitable for the determination of aluminium by graphite furnace atomic absorption spectrometry. The instrument detection limit for the method was 0.48 μg/L. Method blanks were used to estimate background levels of contamination of 14.80 μg/L. The mean concentration of aluminium across all tissues was 0.39 μg Al/g tissue dry wt. There were no statistically significant regionally specific differences in the content of aluminium. We have developed a robust method for the precise and accurate measurement of aluminium in human breast tissue. There are very few such data currently available in the scientific literature and they will add substantially to our understanding of any putative role of aluminium in breast cancer. While we did not observe any statistically significant differences in aluminium content across the breast it has to be emphasised that herein we measured whole breast tissue and not defatted tissue where such a distribution was previously noted. We are very confident that the method developed herein could now be used to provide accurate and reproducible data on the aluminium content

  13. Effective Production of Sorbitol and Mannitol from Sugars Catalyzed by Ni Nanoparticles Supported on Aluminium Hydroxide

    OpenAIRE

    Rodiansono Rodiansono; Shimazu Shogo

    2013-01-01

    Effective production of hexitols (sorbitol and mannitol) was achieved from sugars by means of nickel nanoparticles supported on aluminium hydroxide (NiNPs/AlOH) catalyst. NiNPs/AlOH catalyst was prepared by a simple and benign environmentally procedure using less amount of sodium hydroxide. ICP-AES and XRD analyses confirmed that the NiNPs/AlOH catalysts comprised a large amount of remained aluminium hydroxide (i.e. bayerite and gibbsite). The presence of aluminium hydroxide caused a high dis...

  14. The Major Events of China’s Aluminium Industry in 2005

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    <正>The year 2005 is seen as a turning point for China’s aluminium industry with the whole industry making losses leading to the closures, reorganization and acquisitions of the smelters. The macro-adjustment policies of the government on the aluminium industry and the industry’s operating difficulties led to the overall change of the industry, which is reflected by the strengthened position of China’s aluminium industry in the world and China’s influence on the world market is growing with the united

  15. A feasibility study of the in vivo measurement of aluminium in peripheral bone

    Energy Technology Data Exchange (ETDEWEB)

    Green, S.; Chettle, D.R. (Birmingham Univ. (United Kingdom). School of Physics and Space Research)

    1992-12-01

    In this note the authors discuss the feasibility of constructing a neutron source, using the [sup 3]H([sup 1]H,n)[sup 3] He reaction and the 3MV Dynamitron accelerator in the University of Birmingham, which is suitable for the measurement of aluminium in vivo. The immediate purpose was for the measurement of aluminium in bone, particularly in renal dialysis patients, but another possible application is mentioned in regard to a possible link between raised body stores of aluminium and Alzheimers Disease. (UK).

  16. Emeraldine base as corrosion protective layer on aluminium alloy AA5182, effect of the surface microstructure

    DEFF Research Database (Denmark)

    Cecchetto, L; Ambat, Rajan; Davenport, A.J.

    2007-01-01

    AA5182 aluminium alloy cold rolled samples were coated by thin Wlms of emeraldine base (EB) obtained from a 5% solution in N-methylpyrrolidinone. Accelerated corrosion tests prove this coating very eVective for corrosion protection of aluminium alloys in neutral environment. This study underlines......: • a weak redox activity of the polymer which passivate the metal, • a proton involving self-healing process taking place at the polymer–metal interface, which contributes to delay local acidiWcation in Wrst steps of corrosion on EB coated aluminium surfaces....

  17. Kinetic constraints in acute aluminium toxicity in the rainbow trout (Oncorhynchus mykiss).

    Science.gov (United States)

    Exley, C; Wicks, A J; Hubert, R B; Birchall, J D

    1996-03-07

    We have designed a laboratory bioassay to expose fish to kinetically determined differences in aluminium hydroxide solution chemistry. We have used this system to demonstrate the hitherto unexpected result of an acute aluminium toxicity in the fish at a pH of 6.5. Supporting experiments have demonstrated that the mechanism of toxicity at this pH was probably an asphyxiation brought about by aluminium-induced changes in the rheological and diffusional properties of the mucus lining of the gill epithelium.

  18. The Electricity Price Fluctuationson China’s Aluminium Industry—PartⅠ

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    <正> The aluminium industry is one of the majorelectricity consuming industries in China.Based on the calculation of 15,000 kwh for oneton of aluminium,China’s total power con-sumption for the production of 5.54 milliontons aluminium in 2003 consumed 83.1 billionkwh electricity,accounting for 4 per cent ofChina’s total electricity consumption in 2003,and it is one of the largest power consumingindusties in China.Since China is a large country with differentpower supply conditions across its vast landareas,the electricity generating cost also variesacross the countrty,leading to apparent differ

  19. Behaviour of painted aluminium in Ibero-American atmospheres

    Directory of Open Access Journals (Sweden)

    Morcillo, M.

    2003-12-01

    Full Text Available Aluminium generally presents good corrosion resistance to the atmosphere. However, unprotected aluminium and aluminium alloys weather outdoors to an ugly grey colour, which deepens to black in industrial atmospheres, and undergo superficial pitting in marine atmospheres, etc. Finishing technologies are applied for their protection and decoration in a wide range of applications. These technologies basically consist of two protection processes: anodizing and painting; the latter going from conventional solvent base paints to modem water-borne, high solids and powder coatings. This paper considers the weathering performance of three paint systems: alkyd, polyurethane and polyester, after more than three years of exposure in a wide spectra of Ibero-American atmospheric conditions. The information reported includes resistance to undercutting corrosion at the scribe, filiform corrosion, fungal attack and change in the physical-chemical properties of the paint surface (loss of gloss, colour changes, chalking, etc..

    El aluminio, en general, presenta una buena resistencia a la corrosión en la atmósfera. Sin embargo, el aluminio sin ninguna protección y las aleaciones de aluminio expuestas a la intemperie envejecen mostrando un color gris, negro en el caso de atmósferas industriales, sufren la formación de picaduras en atmósferas marinas, etc. Para su protección, o a efectos decorativos, se le aplican diferentes procesos de acabado en un amplio rango de aplicaciones. Estos procesos de acabado, básicamente consisten en dos métodos de protección: anodizado y pintado; este último abarca desde pinturas convencionales de base disolvente hasta modernos sistemas base agua, de alto contenido en sólidos o pinturas en polvo. Este trabajo considera el comportamiento de tres sistemas de pinturas: alquídico, poliuretano y poliéster, tras más de tres años de exposición en un amplio espectro de condiciones atmosféricas de Iberoamérica. La

  20. 32 CFR 636.32 - Miscellaneous instructions.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Miscellaneous instructions. 636.32 Section 636.32 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND... towed with a chain or rope (vehicles may be towed by another privately owned vehicle by use of a...

  1. Hot Deformation Of 6xxx Series Aluminium Alloys

    Directory of Open Access Journals (Sweden)

    Mrówka-Nowotnik G.

    2015-06-01

    Full Text Available The hot deformation behavior of the 6xxx aluminum alloys was investigated by compression tests in the temperature range 100°C-375°C and strain rate range 10−4s−1 and 4×10−4s−1 using dilatometer DIL 805 BÄHR Thermoanalyse equipped with accessory attachment deformation allows the process to execute thermoplastic in vacuum and inert gas atmosphere. Associated microstructural changes of characteristic states of examined alloys were studied by using the transmission electron microscope (TEM. The results show that the stress level decreases with increasing deformation temperature and deformation rate. And was also found that the activation energy Q strongly depends on both, the temperature and rate of deformation. The results of TEM observation showing that the dynamic flow softening is mainly as the result of dynamic recovery and recrystallization of 6xxx aluminium alloys.

  2. Hole quality and burr reduction in drilling aluminium sheets

    DEFF Research Database (Denmark)

    Pilny, Lukas; De Chiffre, Leonardo; Piska, Miroslav;

    2011-01-01

    Optimization of the metal drilling process requires creation of minimum amount of burrs and uniform appearance of the drilled holes. In this paper, an experimental investigation was performed on 2 mm sheets of wrought aluminium alloy Al99.7Mg0.5Cu-H24, using 1.6 and 2 mm diameter drills. Cutting...... data, clamping conditions, and drill geometry were varied in order to optimize the process and reach the desired quality. The results revealed possible reduction of burr occurrence on both the entry and exit side of the sheet, requiring no additional deburring. The demand on the uniform appearance...... of drilled holes was fulfilled as well as high productivity achieved. Such optimized process results in a noticeable production cost reduction....

  3. Hole quality and burr reduction in drilling aluminium sheets

    DEFF Research Database (Denmark)

    Pilny, Lukas; De Chiffre, Leonardo; Piska, Miroslav;

    2012-01-01

    Optimization of the metal drilling process requires creation of minimum amount of burrs and uniform appearance of the drilled holes. In this paper, an experimental investigation was performed on 2 mm sheets of wrought aluminium alloy Al99.7Mg0.5Cu-H24, using 1.6 and 2 mm diameter drills. Cutting...... data, clamping conditions, and drill geometry were varied in order to optimize the process and reach the desired quality. The results revealed possible reduction of burr occurrence on both the entry and exit side of the sheet, requiring no additional deburring. The demand on the uniform appearance...... of drilled holes was fulfilled as well as high productivity achieved. Such optimized process results in a noticeable production cost reduction....

  4. Synthesis and characterization of yttrium aluminium garnet (YAG powders

    Directory of Open Access Journals (Sweden)

    Magdalena Zarzecka-Napierala

    2007-12-01

    Full Text Available In this paper synthesis and characterization of YAG powders, prepared by a process based on complexing properties of citric acid, was reported. Influence of citric acid estrification induced by 2-propanol or ethylene glycol on the system homogeneity was investigated. These reagents were introduced to aqueous solution of yttrium and aluminium nitrates. A variety of powders from Al2O3-Y2O3 system with different phase composition were obtained by altering the citrate to nitrate ratio. Evolution of the powders phase composition vs. temperature was investigated using DTA/TG, XRD, and FT-IR methods. The most interesting results were observed in case of the citric acid–propanol–relative nitrates system. The mole ratio of these reagents equal to 1:2.5:2.5 (nitrates (Al,Y:citric acid:2-propanol allowed to synthesize pure YAG phase powders at temperature as low as 950°C.

  5. FSW Numerical Simulation of Aluminium Plates by SYSWELD - Part II

    Directory of Open Access Journals (Sweden)

    Jančo Roland

    2016-11-01

    Full Text Available Friction Stir Welding (FSW is one of the most effective solid state joining processes and has numerous potential applications in many industries. The simulation process can provide the evolution of physicals quantities such as temperature, metallurgical phase proportions, stress and strain which can be easily measured during welding. The numerical modelling requires the modelling of the complex interaction between thermal, metallurgical and mechanical phenomena. The aim of this paper is to describe the thermal-fluid simulation of FSW using the finite element method. In the theoretical part of paper heating is provided by the material flow and contact condition between the tool and the welded material. Thermal-mechanical results from the numerical simulation using SYSWELD are also presented for aluminium alloy.

  6. FSW Numerical Simulation of Aluminium Plates by Sysweld - Part I

    Directory of Open Access Journals (Sweden)

    Jančo Roland

    2016-07-01

    Full Text Available Friction Stir Welding (FSW is one of the most effective solid state joining processes and it has numerous potential applications in many industries. The simulation process can provide the evolution of physical quantities such as temperature, metallurgical phase proportions, stress and strain which can be easily measured during welding. The numerical modelling requires the modelling of a complex interaction between thermal, metallurgical and mechanical phenomena. The aim of this paper is to describe the thermal-fluid simulation of FSW using the finite element method. In the theoretical part of the paper heating is provided by the material flow and contact condition between the tool and the welded material. The thermal-fluid results from the numerical simulation for aluminium alloy using SYSWELD are also presented in this paper.

  7. Cold compression residual stress reduction in aluminium alloy 7010

    Energy Technology Data Exchange (ETDEWEB)

    Tanner, D.A. [Limerick Univ. (Ireland). Materials Research Centre; Robinson, J.S. [Dept. of Materials Science and Technology, Univ. of Limerick (Ireland); Cudd, R.L. [HDA Forgings Ltd., Redditch, Worchestershire (United Kingdom)

    2000-07-01

    7010 is one of the high strength aluminium alloys used mainly as plate and forgings in the aerospace industry. Its high strength is achieved through a quenching operation where the material is rapidly cooled from the solution heat treatment temperature (475 C) to room temperature. As with all rapid quenching operations, residual stresses develop, leaving the material unsuitable for further machining operations and for service. Regular shaped forgings are generally cold compressed after quenching to relieve residual stresses. The effect of friction, increasing/decreasing the amount of cold compression and applying cold compression in 'bites' on residual stress magnitudes is unknown. This paper aims to study the effect that these variables have on final residual stress patterns through use of a finite element model. (orig.)

  8. Three-dimensional micro- and nanometre composite aluminium patterns

    Institute of Scientific and Technical Information of China (English)

    Zhao Xiao-Wei; Zhang Zeng-Xing; Xiang Yan-Juan; Zhou Wei-Ya; Wang Gang; Jiang Peng; Gao Yan; Wang Jian-Xiong; Song Li; Liu Dong-Fang; Liu Li-Feng; Dou Xin-Yuan; Luo Shu-Dong

    2005-01-01

    Three-dimensional micro- and nanometre composite aluminium patterns are constructed on Al substrate by using photolithography, reactive ion etching and anodization. A layer of patterned SiO2 mask is introduced as resist on the surface of Al foil, and during anodization the tilted nanopores and remaining Al microstructure are formed underneath the SiO2 mask. The existence of SiO2 mask leads to the deflection of electric field and effect on the transportation of ions, which results in the formation of laterally tilted nanopores, while the nanopores go down directly when being far from the boundaries of SiO2. The vertical and lateral anodization processes proceeding simultaneously construct the Al microstructure under the patterned SiO2 mask.

  9. Calculation of Specific Heat for Aluminium Thin Films

    Institute of Scientific and Technical Information of China (English)

    LU Yao; SONG Qing-Lin; XIA Shan-Hong

    2005-01-01

    @@ We employ Prasher's non-dimensional form to analyse the size effects on specific heat of Al thin films. Compared the calculation results of pure aluminium film with the experimental data, it is found that the reduction of phonon states is not the main reason of the size effect on the specific heat Al thin films with thickness from 10hm to 370nm. However, the Al thin film in air usually has an oxidation layer and the specific heat of the layer is smaller than Al. By including the contribution of the oxidation layer to the thin-film specific heat, the calculation results are much closer to the experimental data. This may be a possible reason of the size effects on specific heat of Al thin films.

  10. Benchmark 2 - Springback of a Jaguar Land Rover Aluminium

    Science.gov (United States)

    Allen, Martin; Oliveira, Marta; Hazra, Sumit; Adetoro, Oluwamayokun; Das, Abhishek; Cardoso, Rui

    2016-08-01

    The aim of this benchmark is the numerical prediction of the springback of an aluminium panel used in the production of a Jaguar car. The numerical simulation of springback has been very important for the reduction of die try outs through the design of the tools with die compensation, thereby allowing for the production of dimensionally accurate complex parts at a reduced cost. The forming stage of this benchmark includes one single forming operation followed by a trimming operation. Cross-sectional profiles should be reported at specific (provided) sections in the part before and after springback. Problem description, tool geometries, material properties, and the required simulation reports are summarized in this benchmark briefing.

  11. PEMANFAATAN KALENG ALUMINIUM BEKAS DALAM MENANGANI PENCEMARAN AIR

    Directory of Open Access Journals (Sweden)

    WIWIK SUSANAH RITA

    2012-10-01

    Full Text Available ABSTRACT Community service by giving a lecture and practical work with a title: “Utilizing of Aluminum Cans used for Water Purification (Pemanfaatan Kaleng Aluminium Bekas dalam Upaya Penjernihan Air” was be held on Wednesday, 22nd of August 2007. The participants of this activity were about 45 of the Third degree Students of SMAN Abiansemal Badung. The aim of the activity was to give information that aluminum cans can be recycled into alum (tawas, where it can be used for water purification. The result of this activity indicated that the knowledge of the students have broaden. This was showed by Their enthusiastic to give some questions and ideas. They paid attention about the environmental cleanliness, so this activity can help them to solve many environmental problems and motivate them to run a private enterprise.

  12. Materials Science Constraints on the Development of Aluminium Reduction Cells

    Science.gov (United States)

    Metson, James; McIntosh, Grant; Etzion, Ronny

    The Hall-Heroult process for the production of Aluminium metal is some 125 years old. The process is energy constrained by the need to shed around half of the (electrical) energy supplied to the cell as waste heat. The molten cryolite electrolyte is sufficiently aggressive that the only reliable method of protecting the side wall of the cell is to maintain a frozen layer of electrolyte at the hot face of the sidewall. Thus the lack of a cryolite resistant sidewall is but one of several materials science constraints which still limit the energy efficiency of the process. An inert anode and non-consumable cathode are also significant challenges which limit cell life and energy efficiency. Thus there are major challenges in both materials development and new conceptual cell designs to improve the efficiency of this process.

  13. An unconventional set-up for fluxless brazing of aluminium

    CERN Document Server

    Loos, Robert

    1999-01-01

    In order to successfully braze aluminium alloy assemblies without the use of oxide-removing fluxes, an evironment with very low contaminant level is mandatory. This is mostly achieved by using a vacuum furnace. Brazing under inert gas of sufficient purity is also possible. The method reported upon here makes use of a stainless steel bag which can enter a traditional air furnace. The bag is evacuated, giving a well distributed mechanical pressure on the parts to join. The intrinsic handicap of poor vacuum is compensated by regular inert gas flushing, even at high temperatures. The set-up works rather well, and the idea is believed to yield a valuable strategic and economic option, for the realization of special equipment as well as for prototyping work. We intend to use the principle for the CMS Preshower cooling screens.

  14. Designing aluminium friction stir welded joints against multiaxial fatigue

    Directory of Open Access Journals (Sweden)

    L. Susmel

    2016-07-01

    Full Text Available The present paper investigates the accuracy of the Modified Wöhler Curve Method (MWCM in estimating multiaxial fatigue strength of aluminium friction stir (FS welded joints. Having developed a bespoke joining technology, circumferentially FS welded tubular specimens of Al 6082-T6 were tested under proportional and non-proportional tension and torsion, the effect of non-zero mean stresses being also investigated. The validation exercise carried out using the experimental results have demonstrated that the MWCM applied in terms of nominal stresses, notch stresses, and also the Point Method is accurate in predicting the fatigue lifetime of the tested FS welded joints, with its use resulting in life estimates that fall within the uniaxial and torsional calibration scatter bands.

  15. High Temperature Strength of Oxide Dispersion Strengthened Aluminium

    DEFF Research Database (Denmark)

    Clauer, A.H.; Hansen, Niels

    1984-01-01

    is proportional to the Orowan stress and it does not fall below about 0.5-0.7 of the Orowan stress. During creep even at stresses near the threshold stress a dislocation substructure develops consisting of dense tangles surrounding the larger particles and the particle clusters in addition to a coarse dislocation......The tensile flow stress of coarse-grained dispersion strengthened Al-Al2O3 materials were measured as a function of temperature (77–873 K) and volume fraction (0.19-0.92 vol.%) of aluminium oxide. For the same material, the creep strength was determined as a function of temperature in the range 573...... constant (except for the material with the lowest oxide content). The high temperature values of the modulus-corrected yield stresses are approximately two-thirds of the low temperature value. During high temperature creep, there is a definite indication of a threshold stress. This threshold stress...

  16. Texture development during recrystallization of aluminium containing large particles

    DEFF Research Database (Denmark)

    Juul Jensen, Dorte; Hansen, Niels; Humphreys, F. J.

    1985-01-01

    The recrystallization process in heavily deformed commercially pure aluminium containing large intermetallic particles was studied by in situ neutron diffraction texture measurements and various microscopical techniques including texture measurements in local areas and simultaneous determination...... of size and orientation of individual grains. The formation and growth of recrystallization nuclei at the particles and in the matrix were examined by correlating the measured change in texture to the observed change in microstructure. It was found that prolific nucleation of grains having a wide spread...... of orientations takes place close to larger particles or clusters of particles early in the recrystallization process. The texture of fully recrystallized material, however, contains only a relatively weak random component showing that the randomisation effect of the particles was limited. This was ascribed...

  17. Microstructure and Properties of Composite Coatings Obtained on Aluminium Alloys

    Directory of Open Access Journals (Sweden)

    Bara M.

    2016-09-01

    Full Text Available This paper presents methods of modifying the anode surface layers of Al2O3 by introducing carbon to their microstructure. Composite coatings were prepared using two different methods. In the first, coatings were formed by means of oxidation under constant current conditions. Anodic oxidation of aluminium was conducted in a multicomponent electrolyte with the addition of organic acids and graphite. The second method was based on the formation of oxide coatings in an electrolyte without the addition of graphite or heat treatment of the layers of succinic acid. The obtained coatings were tested using SEM, TEM, and GDOES (glow discharge optical emission spectrometry and their tribological and stereometric properties were measured. The study demonstrated the beneficial effects of the methods when used to improve the tribological properties of sliding couples.

  18. The aluminium-amyloid cascade hypothesis and Alzheimer's disease.

    Science.gov (United States)

    Exley, Christopher

    2005-01-01

    Aluminium (Al) is found associated with beta-amyloid (Abeta) in the brain in Alzheimer's disease. Al precipitates Abeta in vitro as distinct fibrillar structures composed of beta-pleated sheets of peptide. The aetiology of their association in vivo is not known. Al is known to increase the brain Abeta burden in experimental animals and this might be due to a direct influence upon Abeta anabolism or direct or indirect affects upon Abeta catabolism. It is difficult to rationalise from an evolutionary perspective the precipitation and persistence of Abeta in vivo. However, Al has not been subject to the same evolutionary pressures as Abeta, it is a recent addition to the biotic environment, and its precipitation of Abeta may have only been subjected to natural selection in the recent past. Whether AD is also part of this ongoing selection process remains to be elucidated

  19. Fractographic analysis of fatigue damage in 7000 aluminium alloys.

    Science.gov (United States)

    Cvijović, Z; Vratnica, M; Gerić, K

    2008-12-01

    In this paper, an attempt is made to correlate the fatigue damage in 7000 aluminium alloys with different impurity contents to the microstructural features and to explain their interdependence through fractographic observations. The Paris constants of these alloys in the form of hot-forged plates subjected to the overaged T73 temper are evaluated and differences in the fatigue crack growth rate described by striation spacing measurements. Scanning electron microscopy analysis of fatigue fracture surfaces revealed that the type and morphological parameters of coarse intermetallic particles play a critical role in fatigue crack growth behaviour. The elemental distribution determined by means of energy-dispersive spectroscopy analysis showed that the fractured particles accelerating the crack advances are larger particles of Fe-rich phases. The fatigue crack growth rate increases considerably with increasing amounts of these particles. The smaller eta, S and Mg(2)Si particles contribute beneficially to fatigue life.

  20. Substructure drag effects and recrystallization textures in aluminium

    Energy Technology Data Exchange (ETDEWEB)

    Higginson, R. [Univ. of Sheffield (United Kingdom). Dept. of Engineering Materials; Bate, P. [Doncasters plc, Melbourne (United Kingdom)

    1999-03-10

    Many important recrystallization texture components in metals such as aluminium originate from nuclei in which the mobile high-angle boundary exists prior to, or is formed in the early stages of, annealing. Nucleation can then occur by a process known as strain-induced boundary migration (SIBM). It is possible that this process will involve several growing subgrains, and the drag from that substructure can then have a significant effect. A simple model is used to demonstrate how changes in the overall driving force for recrystallization and Zener drag can affect recrystallization textures when SIBM is involved. This is discussed in relation to experimental observations and the evidence for this process is reviewed.

  1. Laser beam welding of high strength aluminium-lithium alloys; Laserstrahlschweissen von hochfesten Aluminium-Lithium Legierungen

    Energy Technology Data Exchange (ETDEWEB)

    Enz, Josephin

    2012-07-01

    The present development in aircraft industry determined by the demand for a higher cost-effectiveness. Laser beam welding is one of the most promising joining technologies for the application in the aircraft industry through the considerable reduction of the production costs. Furthermore the weight of an aircraft structure can be reduced by the use of light and high strength aluminium alloys. This paper deals with the development of a process for the laser beam welding of a skin-stringer-joint where the Al-Li-alloy AA2196 is used as stringer material and the Al-Li-alloy AA2198 is used as skin and stringer material. By the use of design of experiments the optimal welding process parameters for different material combinations were determined which will be used for the welding of a 5-stringer panel. Therefore the weld seams of the joints were tested for irregularities and microstructural characteristics. In addition several mechanical tests were performed, which define the quality of the welded joint. Furthermore the influence of the oxide layer and the welding preparation on the welding performance was investigated. (orig.) [German] Die derzeitigen Entwicklungen im Flugzeugbau werden durch die allgemeine Forderung nach einer Steigerung der Wirtschaftlichkeit bestimmt. Das Laserstrahlschweissen ist dabei eines der vielversprechendsten Fuegeverfahren fuer die Anwendung im Flugzeugbau durch das die Herstellungskosten deutlich reduziert werden koennen. Zudem kann durch die Verwendung von leichten und hochfesten Aluminium-Legierungen das Gewicht einer Flugzeugstruktur zusaetzlich reduziert werden. Die vorliegende Arbeit befasst sich mit der Entwicklung eines Prozesses zum Laserstrahlschweissen einer Skin-Stringer-Verbindung aus den Aluminium-Lithium-Legierungen AA2196 (als Stringer-Werkstoff) und AA2198 (als Skin- und Stringer-Werkstoff). Unter Verwendung der statistischen Versuchsplanung wurden die optimalen Einstellungen der Schweissprozessparameter fuer die

  2. Remelting of Aluminium by Continuous Submersion of Rolled Scrap

    Energy Technology Data Exchange (ETDEWEB)

    Farner, Snorre

    2000-12-01

    When remelting aluminium scrap, metal losses due to dross generation is a common problem. Reduction of these losses will give substantial economic and environmental benefits. Dross is generated when aluminium metal oxidizes and films of oxide envelope molten metal. When a cold metal object is immersed in a melt, the heat of the melt around this is transferred so rapidly into the object that a shell of melt often solidifies to the surface of the object. When scrap with low bulk density is charged to a melt, solidification of melt on the cold scrap prevents melt from entering the cavities in the bulk of the scrap, and the bulk density remains low. Thus the scrap tends to float on the melt surface. Submersion of this scrap is important to avoid oxidation and subsequent dross generation. One solution to this is to roll scrap to a strip and feed it into the melt. This system has been examined by studying feeding of a continuous, thin aluminium plate into molten aluminium. Also, the effect of lacquer was considered, as well as feeding the plate into a launder with melt flowing along the surface of the plate. An analytical, one-dimensional, steady-state model has been developed to describe the melting and the melting mechanisms. It is based on a shell solidifying on the plate surface and a gap introducing a thermal resistance 1/h{sub g} between the shell and the plate. The thermal resistance 1/h{sub l} of the boundary layer of the melt is included. Depending on these resistances, the initial temperature of the plate and the melt temperature, a shell will form, and the plate will penetrate a distance P into the melt before it melts away. An experimental apparatus was designed and constructed to feed aluminium plate from a coil into a melt bath at a specified velocity. The plate could be withdrawn rapidly to ''freeze'' the situation like it was below the melt surface. The penetration depth P of the plate could be measured and shell formation observed

  3. Composition of microfouling on aluminium and fibre glass panels exposed in Agatti waters (Lakshadweep Island)

    Digital Repository Service at National Institute of Oceanography (India)

    Raveendran, T.V.; Sankaran, P.D.; Wagh, A.B.

    Rate of microfouling build-up was high during the initial periods of exposure of test surfaces but decreased with the increasing duration. Fibre glass surfaces showed higher deposition than those of aluminium. Carbohydrates and lipids were the major...

  4. Determination of iron, copper and aluminium by gas-liquid chromatography.

    Science.gov (United States)

    Moshier, R W; Schwarberg, J E

    1966-03-01

    Gas chromatography has been utilised in the analysis of two National Bureau of Standard alloys for quantitative determination of aluminium, iron and copper. In the analysis of N.B.S. 162a the relative mean errors were 3.13% for aluminium, 2.06% for iron and -1.72% for copper and for N.B.S. 164a the relative mean errors were -1.39%, -0.19% and -0.89% for aluminium, iron and copper, respectively. The procedure for analysis involves solution of the alloy, conversion of the metal ions to trifluoroacetylacetonates by solvent extraction and, finally, complete separation of the metal chelates and quantitative determination by gas chromatography using a column containing Gas Pack F coated with Tissuemat E, a polyethylene wax. Other metals present in the N.B.S. samples did not interfere with the determination of aluminium, iron and copper.

  5. Synthesis of silver nanotubes by electroless deposition in porous anodic aluminium oxide templates.

    Science.gov (United States)

    Zhang, Shu-Hong; Xie, Zhao-Xiong; Jiang, Zhi-Yuan; Xu, Xin; Xiang, Juan; Huang, Rong-Bin; Zheng, Lan-Sun

    2004-05-07

    An electroless deposition method has been employed for the synthesis of silver nanotubes using porous anodic aluminium oxide as templates, by which high-yield silver nanotubes with length over ten microns have been synthesized.

  6. Morphology of Platinum Nanowire Array Electrodeposited Within Anodic Aluminium Oxide Template Characterized by Atomic Force Microscopy

    Institute of Scientific and Technical Information of China (English)

    孔令斌; 陆梅; 李梦轲; 郭新勇; 力虎林

    2003-01-01

    Uniform platinum nanowires were synthesized by electrodepositing the platinum under a very low altering current frequency (20Hz) and increasing voltage (5-15 V) in the pores of anodic aluminium oxide (AAO) template.Atomic force microscopy observation indicates that the template membranes we obtained have hexagonally closepacked nanochannels. The platinum nanowires have highly ordered arrays after partially dissolving the aluminium oxide membrane. With the increasing dissolving time, the platinum nanowire array collapsed. A concave topography of the aluminium substrate was observed after the aluminium oxide membrane was dissolved completely and the platinum nanowires were released from the template. Platinum nanowires were also characterized by transmission electron microscopy and the phase structure of the Al/AAO/Pt composite was proven by x-ray diffraction.

  7. Painting of aluminium panels – state of the art and development issues

    Directory of Open Access Journals (Sweden)

    Xu Zhenhai

    2015-01-01

    Full Text Available Auto-makers plan a broad shift from steel to aluminium uses over the next decade. In North America, for example, the target is to have 18% of vehicles having all-aluminium bodies by 2025, in spite of that only less than 1% has been achieved in 2014. To achieve this transformation, painting aluminium panels in a mass-production scale with high quality is an important requirement to be met, considering that for long-term protection and surface appearance of the vehicles to be made as well as cost issues. This paper presents a review work carried out on the key elements concerning the painting process, progress in research and applications. Special issues concerning painting aluminium, including the pretreatment of panels surface before e-coat application and the pretreatment of panels before paint baking, are particularly addressed, and remaining issues relating to high quality painting in mass production are discussed.

  8. Key techniques of automatic gauge control and profile control for aluminium strip and foil

    Institute of Scientific and Technical Information of China (English)

    LI Mou-wei; LIU Hong-fei; WANG Xiang-li; TONG Chao-nan; YIN Feng-fu; BIAN Xin-xiao; ZHANG Lei

    2006-01-01

    Such characteristics of aluminium strip and foil as soft and thin gauge make tension control one of the key techniques for automation gauge control(AGC). To avoid the disadvantage of traditional mathematical control method which is unfitful for nonlinear hysteresis, the technique for tension AGC fuzzy control was developed and thickness deviation more than 3% of product thickness was achieved consequently in 1 350 mm cold rolling mill of aluminium strip and foil. Additionally, because the gauge of aluminium strip and foil is thin, stage-cooling roll method becomes a key technique for profile control. So stage-cooling roll intelligent control method is developed and pre-coated aluminum foil with good profile less than 10 I (the relative differences in elongation of 0.01% ) is produced using the profile control system in 1 400 mm cold rolling mill of aluminium strip and foil.

  9. Shear Strength of Single Lap Joint Aluminium-Thermoplastic Natural Rubber (Al-TPNR) Laminated Composite

    Science.gov (United States)

    Muzakkar, M. Z.; Ahmad, S.; Yarmo, M. A.; Jalar, A.; Bijarimi, M.

    2013-04-01

    In this work, we studied the effect of surface treatment on the aluminium surface and a coupling agent to improve adhesion between aluminium with organic polymer. Thermoplastic natural rubber (TPNR) matrix was prepared by melt blending of natural rubber (NR), liquid natural rubber (LNR) compatibilizer, linear low density polyethylene (LLDPE) and polyethylene grafted maleic anhydride (PE-g-MAH). The PEgMAH concentration used was varied from 0% - 25%. In addition, the aluminium surface was pre-treated with 3-glycidoxy propyl trimethoxy silane (3-GPS) to enhance the mechanical properties of laminated composite. It was found that the shear strength of single lap joint Al-TPNR laminated composite showing an increasing trend as a function of PE-g-MAH contents for the 3-GPS surface treated aluminium. Moreover, the scanning electron microscope (SEM) revealed that the strength improvement was associated with the chemical state of the compound involved.

  10. Aluminium dross-based insulating and exothermic materials for metallurgical industry

    Directory of Open Access Journals (Sweden)

    K. Stec

    2010-10-01

    Full Text Available In the conducted investigations, aluminium dross, i.e. solid waste formed in the production and recycling of aluminium, was used as one of the basic raw materials to obtain a material characterised by insulating and exothermic properties, applied to heat riser heads in the process of iron or steel casting. The product was obtained by filtrating the slurry. In the raw mix, aluminium dross played the role of a refractory filler and a source of metallic aluminium, taking part in exothermic reactions.The trials conducted in semi-technical conditions, using prototype riser head sleeves, proved their good quality and effectiveness in themetallurgical process, comparable to the currently applied imported sleeves.

  11. Aluminium Can Material Industry in China Having Great Potential in Development

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    <正>According to experts in the business,the com- petition pattern in the world aluminium can ma- terial market will experience changes before 2008.China may become one of the 6 largest tin material manufacturers in the world.

  12. Does either the gastrointestinal peptide PYY or the neuropeptide NPY bind aluminium?

    Science.gov (United States)

    Korchazhkina, Olga V; Ashcroft, Alison E; Croom, James; Exley, Christopher

    2003-04-01

    Peptide YY and neuropeptide Y are common peptides with a high degree of primary and tertiary structural homology. They are multifunctional and participate in a diverse array of distinct activities including regulation of gastrointestinal function and neural regulation of satiety. Recently both have been implicated in aluminium chemistry in vivo although their modus opperandi have not been determined. We have used molecular fluorescence, RP-HPLC, ESMS and equilibrium dialysis to identify if either peptide YY or neuropeptide Y will bind aluminium in vitro under near-physiological conditions. We were unable to demonstrate any direct interaction between either peptide and aluminium although we have speculated upon an in vivo mechanism whereby PYY, in particular, might form a stable complex with aluminium.

  13. Implants for surgery -- Metallic materials -- Part 3: Wrought titanium 6-aluminium 4-vanadium alloy

    CERN Document Server

    International Organization for Standardization. Geneva

    1996-01-01

    Specifies the characteristics of, and corresponding test methods for, the wrought titanium alloy known as titanium 6-aluminium 4-vanadium alloy (Ti 6-Al 4-V alloy) for use in the manufacture of surgical implants.

  14. Role of Root Exudates in Adaptative Reactions of Buckwheat Plants in Aluminium-acid Stress

    Directory of Open Access Journals (Sweden)

    A.E. Smirnov

    2014-03-01

    Full Text Available Aliminium toxicity is major limiting factor of crop production in acidic soils. It is known that mechanisms of toxic effects of aluminium are differing in biochemical characters, research of aluminium toxicity complicated by variety of its chemical forms and migration in soil and water ability. The root exudates qualitative composition of common buckwheat was evaluated. Organic complexing agents – oxalic acid and phenolic compounds were revealed. The role of these complexing agents in the buckwheat aluminium resistance under acidic stress, participation in processes of external and internal detoxification was shown. Spectrophometric assay revealed an increase in root secretion of oxalic acid by 2.5 times and decrease in content of phenolic compounds in root exudates solution by 3 times upon aluminium (50 µM treatment. In the meanwhile the same concentration of the metal had induced phenylalanine ammonia-lyase activity by 2 times.

  15. Recovery of actinides from actinide-aluminium alloys by chlorination: Part I

    OpenAIRE

    Cassayre, Laurent; Soucek, Pavel; Mendes, Eric; Malmbeck, Rikard; Nourry, Christophe; Eloirdi, Rachel; Glatz, Jean-Paul

    2011-01-01

    Pyrochemical processes in molten LiCl–KCl are being developed in ITU for recovery of actinides from spent nuclear fuel. The fuel is anodically dissolved to the molten salt electrolyte and actinides are electrochemically reduced on solid aluminium cathodes forming solid actinide–aluminium alloys. A chlorination route is being investigated for recovery of actinides from the alloys. This route consists in three steps: Vacuum distillation for removal of the salt adhered on the electrode, chlorina...

  16. Pleiotropic protective roles of melatonin against aluminium-induced toxicity in rats.

    Science.gov (United States)

    Allagui, Mohamed S; Hachani, Rafik; Saidi, Saber; Feriani, Anouer; Murat, Jean C; Kacem, Kamel; El feki, Abdelfatteh

    2015-10-01

    This study aimed to investigate the potential effects of melatonin on aluminium-induced toxicity in a rat model using a set of biochemical, inflammatory, oxidant, lipid profile criteria and hepatic integrity (verified by hematoxylin-eosin staining). The results indicated that AlCl3 administration during 60 days (100 mg/kg b.w.) significantly increased the activities of transaminases AST and ALT by 46% (p aluminium-intoxication.

  17. RESISTANCE TEST OF DEPOSITED ALUMINIUM LAYER ON PARABOLIC PARTS OF VEHICLE HEADLIGHT

    Directory of Open Access Journals (Sweden)

    Michal ADAMIK

    2014-10-01

    Full Text Available This paper documents a basic quality measurement in an automotive light industry. The experiment is based on a verification of reflective aluminium layer resistance against 100% humidity and higher temperature. This simulates the lifetime of a headlight on vehicle. The goal of this test is to prove that the reflective aluminium layer is able to resist to this environment without any changes in its structure. If any change occurs, the modification of production process will be needed.

  18. Stress proteins and glial cell functions during chronic aluminium exposures: protective role of curcumin.

    Science.gov (United States)

    Sood, Pooja Khanna; Nahar, Uma; Nehru, Bimla

    2012-03-01

    Involved in the ongoing debate is the speculation that aluminium is somehow toxic for neurons. Glial cells cope up to protect neurons from this toxic insult by maintaining the glutathione homeostasis. Of late newer and newer roles of glial cells have been depicted. The present work looks into the other regulatory mechanisms that show the glial cells response to pro-oxidant effects of aluminium exposure. In the present investigation we have evaluated the inflammatory responses of the glial cells as well as HSP70-induction during aluminium exposure. Further, the protective role of curcumin is also evaluated. Aluminium was administered by oral gavage at a dose level of 100 mg/kg b.wt/day for a period of 8 weeks. Curcumin was administered i.p. at a dose of 50 mg/kg b.wt./day on alternate days. Enhanced gene and protein expression of HSP70 in the glial fractions of the aluminium exposed animals as compared to the corresponding neuronal population. Aluminium exposure resulted in a significant increase in the NF-κB and TNF-α expression suggesting inflammatory responses. In the conjunctive treatment group of aluminium and curcumin exposure marked reduction in the gene and protein expression of NF-κB and TNF-α was observed. This was further reflected in histopathological studies showing no evidence of inflammation in conjunctive group as compared to aluminium treatment. From the present study, it can be concluded that curcumin has a potential anti-inflammatory action and can be exploited in other toxicological conditions also.

  19. Development of microstructure during sintering and aluminium exposure of titanium diboride ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Pettersen, Gunnar

    1997-12-31

    In the production of aluminium, much less energy need be consumed if an inert, wetted cathode is present in the electrolysis cell. Titanium diboride, TiB{sub 2}, is easily wetted and does not readily dissolve in liquid aluminium, but it degrades, probably because aluminium penetrates into it during electrolysis. This degradation is linked to impurities present in the TiB{sub 2} after sintering. This thesis studies the sintering process and how aluminium penetrates into the material. High-purity, high-density TiB{sub 2} compacts were made by hot pressing at 50 MPa in an argon atmosphere at 1790-1960 {sup o}C. Samples were made with different impurity additions. These samples were exposed to liquid aluminium at 980 {sup o}C for 24 hours. All samples were penetrated, but the amount and appearance depended on the sintering aid used. Unlike the other samples, pure TiB{sub 2} was easily penetrated by metallic aluminium because of the open porosity and microcracks of this material. Grain boundary penetration was common among the samples. Differences in penetration behaviour between grain boundaries are probably due to differences in grain boundary energy. But no relation to segregants or boundary misorientation was found. The orientation of grain boundary planes and de-wetting of thin films upon cooling may explain the observed microstructure development. The samples sintered with Ti addition suffered extensive penetration despite their high densities. The grain boundaries of these samples became faceted and contained thicker films of metallic aluminium, presumably because of increased solubility due to iron segregations. All secondary phases present in the grain junctions after sintering, except from the B{sub 4}C phase, reacted with the penetrated aluminium. This did not cause swelling and cracking, as has been suggested by other authors. 101 refs., 48 figs., 7 tabs.

  20. Mechanical properties and plastic anisotropy of aluminium laminates produced by accumulative roll bonding (ARB)

    Energy Technology Data Exchange (ETDEWEB)

    Chekhonin, Paul; Beausir, Benoit; Scharnweber, Juliane; Oertel, Carl-Georg; Skrotzki, Werner [Institut fuer Strukturphysik, Technische Universitaet Dresden (Germany); Hoeppel, Heinz Werner [Lehrstuhl Allgemeine Werkstoffwissenschaften, Universitaet Erlangen-Nuernberg (Germany); Jaschinski, Joern [Institut fuer Leichtbau und Kunststofftechnik, Technische Universitaet Dresden (Germany)

    2011-07-01

    Aluminium sheets with layers of different purity (99.999 and 99.5) have been produced by ARB. The tensile strength and Lankford parameter as a function of the number of ARB cycles are measured by tensile testing. ARB increases the tensile strength significantly. The planar anisotropy decreases with the number of ARB cycles while the normal anisotropy reaches a plateau after 2 cycles. The results will be compared with those of ARB aluminium with a purity of 99.5.

  1. Dynamic crushing response of closed-cell aluminium foams during shock loading

    Science.gov (United States)

    Islam, M. A.; Kader, M. A.; Hazell, P. J.; Escobedo-Diaz, J. P.; Brown, A. D.; Appleby-Thomas, G. J.; Saadatfar, M.; Quadir, M. Z.

    2017-01-01

    Understanding the impact response of aluminium foams is essential for assessing their energy absorption capacity under dynamic loading. In this paper, the dynamic compaction behavior of closed-cell aluminium foam (CYMAT ™) has been tested using the plate-impact technique. Post-impacted samples have been examined using optical microscopy to observe the microstructural changes with the objective of elucidating the pore-collapse mechanism.

  2. Aluminium adjuvants and adverse events in sub-cutaneous allergy immunotherapy

    OpenAIRE

    2014-01-01

    Sub-cutaneous immunotherapy is an effective treatment for allergy. It works by helping to modify or re-balance an individual’s immune response to allergens and its efficacy is greatly improved by the use of adjuvants, most commonly, aluminium hydroxide. Aluminium salts have been used in allergy therapy for many decades and are assumed to be safe with few established side-effects. This assumption belies their potency as adjuvants and their potential for biological reactivity both at injection ...

  3. N-octane catalytic isomerization with aluminium and aluminiumlanthanum pillared nontronite

    OpenAIRE

    Moura,C. P. de; Fernandes,M. V. S.; L. R. D. da Silva; L. C. G. Vasconcellos; R. F. do Nascimento; Valentini, A.

    2015-01-01

    Abstract Nontronite samples pillared with aluminium (Pt/Al-PilM) and aluminium-lanthanum (Pt/AlLa-PilM) were prepared from natural nontronite, characterized and tested as catalyst in n-octane hydroisomerization reaction. The results were compared with those obtained from the same reaction using commercial Y-zeolite impregnated with platinum (Pt-Y). Experiments with commercial zeolite show that platinum is essential to maintain the reactional selectivity of the products. The conversion capacit...

  4. Nineteen cases of persistent pruritic nodules and contact allergy to aluminium after injection of commonly used aluminium-adsorbed vaccines.

    Science.gov (United States)

    Bergfors, Elisabet; Björkelund, Cecilia; Trollfors, Birger

    2005-11-01

    Rare cases of persistent pruritic nodules, sometimes associated with aluminium (Al) allergy, have been reported after the use of several Al adsorbed vaccines. During vaccine trials in the 1990s a high incidence of pruritic nodules (645 cases/76,000 recipients), in 77% associated with Al allergy, was observed after the administration of diphtheria-tetanus / acellular pertussis (DT/aP) vaccines from a single producer. In the present report 19 children with pruritic nodules after vaccination with Al hydroxide-adsorbed DTaP/polio+Hib (Infanrix, Pentavac) are described. The children had intensely itching nodules at the injection site, often aggravated during upper respiratory tract infections, and local skin alterations. So far, the symptoms have persisted for up to 7 years. The median time between vaccination and onset of symptoms was 1 month. 16 children were epicutaneously tested for Al, all with positive reactions indicating delayed hypersensitivity to Al. The condition is not commonly known but is important to recognise, as the child and the family may suffer considerably. Future vaccinations with Al-adsorbed vaccines may cause aggravation of the symptoms and the Al allergy. Al-containing skin products, such as antiperspirants, may cause contact dermatitis. Nodules may be mistaken for tumours. Even though the incidence of itching nodules and Al allergy after administration of Infanrix, Pentavac and other Al-adsorbed vaccines is probably low, research to replace Al adjuvants seems appropriate. We conclude that intensely itching subcutaneous nodules, lasting for many years, and hypersensitivity to aluminium may occur after DTaP/polio+Hib vaccination of infants.

  5. Aluminium Foam and Magnesium Compound Casting Produced by High-Pressure Die Casting

    Directory of Open Access Journals (Sweden)

    Iban Vicario

    2016-01-01

    Full Text Available Nowadays, fuel consumption and carbon dioxide emissions are two of the main focal points in vehicle design, promoting the reduction in the weight of vehicles by using lighter materials. The aim of the work is to evaluate the influence of different aluminium foams and injection parameters in order to obtain compound castings with a compromise between the obtained properties and weight by high-pressure die cast (HPDC using aluminium foams as cores into a magnesium cast part. To evaluate the influence of the different aluminium foams and injection parameters on the final casting products quality, the type and density of the aluminium foam, metal temperature, plunger speed, and multiplication pressure have been varied within a range of suitable values. The obtained compound HPDC castings have been studied by performing visual and RX inspections, obtaining sound composite castings with aluminium foam cores. The presence of an external continuous layer on the foam surface and the correct placement of the foam to support injection conditions permit obtaining good quality parts. A HPDC processed magnesium-aluminium foam composite has been developed for a bicycle application obtaining a suitable combination of mechanical properties and, especially, a reduced weight in the demonstration part.

  6. Mineralogical analysis of the respiratory tract in aluminium oxide-exposed workers.

    Science.gov (United States)

    Voisin, C; Fisekci, F; Buclez, B; Didier, A; Couste, B; Bastien, F; Brochard, P; Pairon, J C

    1996-09-01

    A retrospective study was conducted in order to characterize the retention of fibrous and nonfibrous mineral particles in the respiratory tract in subjects with previous occupational exposure in the aluminium industry. Bronchoalveolar lavage (BAL) fluid (three samples) or lung parenchyma (two samples) were studied using analytical transmission electron microscopy in five patients. A high concentration of aluminium fibres (> 10(7) fibres.g-1 dry lung) was identified in two lung tissue samples, and aluminium fibres were also identified in BAL fluid in three patients. All fibres were short (mean length: 1-2 microns), with no fibre longer than 5 microns. Some biopersistence of these fibres in the respiratory tract is suggested from these observations, since fibres were identified in biological samples collected more than 4 yrs after cessation of exposure in four out of five patients. Occupational physicians should be aware of possible exposure to short, thin aluminium fibres during primary aluminium production. Further studies are needed to assess the potential health effects of these fibres. Industrial hygiene measurements should also be performed to document the potential sources of exposure to aluminium fibres in this industry.

  7. Increased absorption of aluminium from a normal dietary intake in dementia.

    Science.gov (United States)

    Roberts, N B; Clough, A; Bellia, J P; Kim, J Y

    1998-02-15

    Serum aluminium was significantly raised (p hydroxide therapy 0.54 +/- 0.17, compared with healthy volunteers 0.21 +/- 0.13, although not as high as in patients with end stage renal failure on regular dialysis 0.88 +/- 0.42. The urine outputs (mumol/l mean +/- 1 s.d.) of aluminium and silicon, respectively, were also significantly increased up to 5-fold in dementia 2.89 +/- 1.78 (n = 23) and 1587 +/- 645 (n = 22) and patients on regular aluminium hydroxide therapy 5.03 +/- 2.08 (n = 8) and 998 +/- 364 (n = 21) compared with healthy volunteers 0.95 +/- 0.82 (n = 84) and 471 +/- 332 (n = 114). The increase in urine aluminium was thus associated with a similarly marked increase in the output of silicon. The increased absorption of aluminium in dementia patients is equivalent to the intestinal loading in Aludrox therapy. Also silicon appears to be important in the renal excretion of the absorbed aluminium. Whether this is a phenomenon related to the elderly or the process of dementia warrants further study.

  8. Oxidation and waste-to-energy output of aluminium waste packaging during incineration: A laboratory study.

    Science.gov (United States)

    López, Félix A; Román, Carlos Pérez; García-Díaz, Irene; Alguacil, Francisco J

    2015-09-01

    This work reports the oxidation behaviour and waste-to-energy output of different semi-rigid and flexible aluminium packagings when incinerated at 850°C in an air atmosphere enriched with 6% oxygen, in the laboratory setting. The physical properties of the different packagings were determined, including their metallic aluminium contents. The ash contents of their combustion products were determined according to standard BS ISO 1171:2010. The net calorific value, the required energy, and the calorific gain associated with each packaging type were determined following standard BS EN 13431:2004. Packagings with an aluminium lamina thickness of >50μm did not fully oxidise. During incineration, the weight-for-weight waste-to-energy output of the packagings with thick aluminium lamina was lower than that of packagings with thin lamina. The calorific gain depended on the degree of oxidation of the metallic aluminium, but was greater than zero for all the packagings studied. Waste aluminium may therefore be said to act as an energy source in municipal solid waste incineration systems.

  9. Aluminium content of some processed foods, raw materials and food additives in China by inductively coupled plasma-mass spectrometry.

    Science.gov (United States)

    Deng, Gui-Fang; Li, Ke; Ma, Jing; Liu, Fen; Dai, Jing-Jing; Li, Hua-Bin

    2011-01-01

    The level of aluminium in 178 processed food samples from Shenzhen city in China was evaluated using inductively coupled plasma-mass spectrometry. Some processed foods contained a concentration of up to 1226 mg/kg, which is about 12 times the Chinese food standard. To establish the main source in these foods, Al levels in the raw materials were determined. However, aluminium concentrations in raw materials were low (0.10-451.5 mg/kg). Therefore, aluminium levels in food additives used in these foods was determined and it was found that some food additives contained a high concentration of aluminium (0.005-57.4 g/kg). The results suggested that, in the interest of public health, food additives containing high concentrations of aluminium should be replaced by those containing less. This study has provided new information on aluminium levels in Chinese processed foods, raw materials and a selection of food additives.

  10. Effect of aluminium toxicity on growth responses and antioxidant activities in Gmelina arborea Roxb. inoculated with AM fungi.

    Science.gov (United States)

    Dudhane, Mayura; Borde, Mahesh; Jite, Paramjit Kaur

    2012-08-01

    Arbuscular mycorrhizal fungi alleviating the adverse Aluminium effects on growth and antioxidant activity was tested in Gmelina plants. Under greenhouse and aluminium stress condition, the mycorrhizal Gmelina plants showed good growth as compared to non mycorrhizal Gmelina plants. Mycorrhizal colonization in Gmelina was found not to be significantly influenced by aluminium concentrations. Results also indicate that symbiotic association was successfully established between Glomus intraradices and Gmelina plants and mycorrhizal colonization consequently increased the biomass of Gmelina. The root proline accumulation was found to increase in mycorrhizal Gmelina plants for osmotic adjustment of stress tissues under first and second level of Aluminium stress. It was observed that Mycorrhizal colonization increased the shoot root Peroxidase and Superoxide dismutase activities in mycorrhizal Gmelina under second level of Aluminium stress. Mycorrhizal fungi play a major role in phytostabilization by secreting one of the glycoprotein, i.e., Glomalin, which stabilizes the Aluminium in soil as well as in the roots of Gmelina plants.

  11. Toxicity evaluation of zinc aluminium levodopa nanocomposite via oral route in repeated dose study

    Science.gov (United States)

    Kura, Aminu Umar; Cheah, Pike-See; Hussein, Mohd Zobir; Hassan, Zurina; Tengku Azmi, Tengku Ibrahim; Hussein, Nor Fuzina; Fakurazi, Sharida

    2014-05-01

    Nanotechnology, through nanomedicine, allowed drugs to be manipulated into nanoscale sizes for delivery to the different parts of the body, at the same time, retaining the valuable pharmacological properties of the drugs. However, efficient drug delivery and excellent release potential of these delivery systems may be hindered by possible untoward side effects. In this study, the sub-acute toxicity of oral zinc aluminium nanocomposite with and without levodopa was assessed using the Organization for Economic Co-operation and Development guidelines. No sign or symptom of toxicity was observed in orally treated rats with the nanocomposite at 5 and 500 mg/kg concentrations. Body weight gain, feeding, water intake, general survival and organosomatic index were not significantly different between control and treatment groups. Aspartate aminotransferase (AST) in 500 mg/kg levodopa nanocomposite (169 ± 30 U/L), 5 mg/kg levodopa nanocomposite (172 ± 49 U/L), and 500 mg/kg layered double hydroxides (LDH) nanocomposite (175 ± 25 U/L) were notably elevated compared to controls (143 ± 05 U/L); but the difference were not significant ( p > 0.05). However, the differences in aspartate aminotransferase/alanine aminotransferase (AST/ALT) ratio of 500 mg/kg levodopa nanocomposite (0.32 ± 0.12) and 500 mg/kg LDH nanocomposite (0.34 ± 0.12) were statistically significant ( p brain was found to be of similar morphology in both control and experimental groups. The kidneys of 500-mg/kg-treated rats with levodopa nanocomposite and LDH nanocomposite were found to have slight inflammatory changes, notably leukocyte infiltration around the glomeruli. The ultra-structure of the neurons from the substantia nigra of nanocomposite-exposed group was similar to those receiving only normal saline. The observed result has suggested possible liver and renal toxicity in orally administered levodopa intercalated nanocomposite; it is also dose-dependent that needs further assessment.

  12. Microwave assisted hydrolysis of aluminium metal and preparation of high surface area Al2O3 powder

    Indian Academy of Sciences (India)

    A K Sivadasan; I Packia Selvam; Sankara Narayanan Potty

    2010-12-01

    Phase pure boehmite particles were prepared by microwave assisted hydrolysis of aluminium sheets. These particles were calcined in air to produce Al2O3 particles with specific surface area of ∼210 m2/g. The alumina particles were characterized by studying X-ray diffraction, transmission electron microscopy and Fourier transform infrared spectroscopy. For comparison, the aluminium hydroxide particles were also prepared by normal hydrolysis of aluminium metal. Normal hydrolysis yielded a mixture of boehmite and bayerite particles whereas microwave assisted hydrolysis produced phase pure boehmite particles. The importance of using microwave radiation for the hydrolysis of aluminium metal is also manifested in a shorter reaction time.

  13. Pemanfaatan Limbah Abu Terbang Sebagai Penguat Aluminium Matrix Composite

    Directory of Open Access Journals (Sweden)

    Subarmono Subarmono

    2008-01-01

    Full Text Available This research aims to utilize fly ash which is obtained from waste of combustion of coal in steam power plant as a reinforcement of aluminum matrix composite (AMC. The amounts of fly ash of 2.5%, 5%, 7.5% and 10% wt were added to fine aluminum powder (dimension of particles are smaller than 40 µm. Each composition was mixed using a rotary mixer for 3 hr. The mixture was uniaxially pressed and it was followed by isostatic compaction with a pressure of 100 MPa to produce green bodies. They was pressureless sintered in argon atmosphere at various temperatures of 500°C, 525°C, 550°C, 575°C and 600ºC. Bending strength, Vickers hardness, wear resistance, density of the AMC were tested, and the microstructures were observed using SEM. The results show that the mechanical properties increase with increasing the fly ash content up to 5% wt. The bending strength, hardness, porosity and wear rate are 74 MPa, 66 VHN, 4.5% and 0.04 mg/(MPa.m, respectively. Abstract in Bahasa Indonesia: Penelitian ini bertujuan untuk memanfaatkan abu terbang sebagai penguat komposit bermatrik aluminium (AMC. Abu terbang merupakan limbah pembakaran batu bara pada pembangkit listrik tenaga uap. Abu terbang sejumlah 2,5%; 5%; 7,5% dan 10% berat dicampur dengan serbuk aluminium (ukuran serbuk lebih kesil dari 40 µm. Setiap campuran diaduk menggunakan rotay mixer selama 3 jam. Campuran aluminum dan abu terbang dikompaksi secara uniaksial dilanjutkan kompaksi secara isostatik dengan tekanan 100 MPa dan diikuti sintering tanpa tekanan dengan lingkungan gas argon dan variasi temperatur 500°C, 525°C, 550°C, 575°C dan 600°C. Kekuatan bending, kekerasan Vickers, ketahanan aus dan densitas komposit diuji serta struktur mikro diamati menggunakan SEM. Hasil pengujian menunjukkan bahwa sifat mekanis meningkat seiring dengan peningkatan fraksi berat abu terbang sampai 5% berat, selebihnya terjadi penurunan. Kekuatam bending, kekerasan Vickers, porositas dan laju keausan berturut

  14. Water defluoridation by aluminium oxide-manganese oxide composite material.

    Science.gov (United States)

    Alemu, Sheta; Mulugeta, Eyobel; Zewge, Feleke; Chandravanshi, Bhagwan Singh

    2014-08-01

    In this study, aluminium oxide-manganese oxide (AOMO) composite material was synthesized, characterized, and tested for fluoride removal in batch experiments. AOMO was prepared from manganese(II) chloride and aluminium hydroxide. The surface area of AOMO was found to be 30.7m2/g and its specific density was determined as 2.78 g/cm3. Detailed investigation of the adsorbent by inductively coupled plasma-optical emission spectrometry, inductively coupled plasma-mass spectrometry, and ion chromatography (for sulphate only) showed that it is composed of Al, Mn, SO4, and Na as major components and Fe, Si, Ca, and Mg as minor components. Thermogravimetric analysis was used to study the thermal behaviour of AOMO. X-ray diffraction analysis showed that the adsorbent is poorly crystalline. The point of zero charge was determined as 9.54. Batch experiments (by varying the proportion of MnO, adsorbent dose, contact time, initial F concentration, and raw water pH) showed that fluoride removal efficiency ofAOMO varied significantly with percentage of MnO with an optimum value of about I11% of manganese oxide in the adsorbent. The optimum dose of the adsorbent was 4 g/L which corresponds to the equilibrium adsorption capacity of 4.8 mg F-/g. Both the removal efficiency and adsorption capacity showed an increasing trend with an increase in initial fluoride concentration of the water. The pH for optimum fluoride removal was found to be in the range between 5 and 7. The adsorption data were analysed using the Freundlich, Langmuir, and Dubinirn-Radushkevich models. The minimum adsorption capacity obtained from the non-linear Freundlich isotherm model was 4.94 mg F-/g and the maximum capacity from the Langmuir isotherm method was 19.2mg F-/g. The experimental data of fluoride adsorption on AOMO fitted well to the Freundlich isotherm model. Kinetic studies showed that the adsorption is well described by a non-linear pseudo-second-order reaction model with an average rate constant of 3

  15. Simulation de la formabilite des alliages d'aluminium AA5754 et AA6063

    Science.gov (United States)

    Eljaafari, Samira

    Les besoins de reduction du poids se sont concretement traduits par l'introduction de nouvelles nuances plus legeres dans les structures automobiles. Ainsi, des alliages d'aluminium ont commence a etre integres dans les pieces de structure de plusieurs vehicules. La faible masse volumique des alliages d'aluminium (2,7g/cm3) permet d'alleger le poids du vehicule qui entraine une diminution de la consommation de carburant et, donc, des emissions de gaz a effet de serre. La striction et la rupture sont les principaux modes de defaillance qui entrainent le rebut systematique des pieces. C'est pourquoi, ameliorer la prediction d'apparition de ces defauts lors de la simulation va dans le sens d'une meilleure maitrise du procede. Dans le cadre de ce travail doctoral, deux modeles sont developpes pour simuler le comportement a grandes deformations d'alliages d'aluminium: un modele polycristallin de type Taylor et un modele a un ou plusieurs elements finis par grain. Les diagrammes limites de formage (DLF) pour les deux alliages d'aluminium AA5754 et AA6063 ont ete simules numeriquement en utilisant une formulation par elements finis pour les polycristaux basee sur l'hypothese de Taylor. Les DLF conventionnels et de l'hydroformage ont ete traces. L'effet des chemins de deformation sur la formabilite des alliages d'aluminium a aussi ete etudie. Finalement, des simulations numeriques avec les donnees de diffraction des electrons retrodiffuses (EBSD) pour 1'alliage d'aluminium AA5754 ont ete effectuees en utilisant le modele a un ou plusieurs elements par grain. Ces simulations sont executees avec differents modeles du durcissement (Asaro, Bassani et puissance). Mots-cles: Formabilite; Alliage d'aluminium; Hydroformage; Glissement cristallographique; Durcissement; Calcul parallele; Diagramme limite de formage (DLF); Diffraction electron.

  16. Determination of aluminium induced metabolic changes in mice liver: a Fourier transform infrared spectroscopy study.

    Science.gov (United States)

    Sivakumar, S; Sivasubramanian, J; Khatiwada, Chandra Prasad; Manivannan, J; Raja, B

    2013-06-01

    In this study, we made a new approach to evaluate aluminium induced metabolic changes in liver tissue of mice using Fourier transform infrared spectroscopy analysis taking one step further in correlation with strong biochemical evidence. This finding reveals the alterations on the major biochemical constituents, such as lipids, proteins, nucleic acids and glycogen of the liver tissues of mice. The peak area value of amide A significantly decrease from 288.278±3.121 to 189.872±2.012 between control and aluminium treated liver tissue respectively. Amide I and amide II peak area value also decrease from 40.749±2.052 to 21.170±1.311 and 13.167±1.441 to 8.953±0.548 in aluminium treated liver tissue respectively. This result suggests an alteration in the protein profile. The absence of olefinicCH stretching band and CO stretching of triglycerides in aluminium treated liver suggests an altered lipid levels due to aluminium exposure. Significant shift in the peak position of glycogen may be the interruption of aluminium in the calcium metabolism and the reduced level of calcium. The overall findings exhibit that the liver metabolic program is altered through increasing the structural modification in proteins, triglycerides and quantitative alteration in proteins, lipids, and glycogen. All the above mentioned modifications were protected in desferrioxamine treated mice. Histopathological results also revealed impairment of aluminium induced alterations in liver tissue. The results of the FTIR study were found to be in agreement with biochemical studies and which demonstrate FTIR can be used successfully to indicate the molecular level changes.

  17. Dietary exposure to aluminium from wheat flour and puffed products of residents in Shanghai, China.

    Science.gov (United States)

    Guo, Junfei; Peng, Shaojie; Tian, Mingsheng; Wang, Liwei; Chen, Bo; Wu, Min; He, Gengsheng

    2015-01-01

    A dietary survey of 3431 residents was conducted by a 24-h dietary recall method in Shanghai, China, quarterly from September 2013 to September 2014. A total of 400 food samples were tested for aluminium concentration, including wheat flour and puffed products from 2011 to 2013. Probabilistic analysis was used to estimate the dietary exposure to aluminium from wheat and puffed products. The means of dietary aluminium exposure for children (2-6 years old), juveniles (7-17 years old), adults (18-65 years old) and seniors (over 65 years old) were 1.88, 0.94, 0.44 and 0.42 mg kg(-1) body weight (bw) week(-1) respectively, with a population average of 0.51 mg kg(-1) bw week(-1). The proportions of those who had aluminium exposure from wheat and puffed products lower than the provisional tolerable weekly intake (PTWI) were 77%, 90%, 97%, and 97% respectively from children to seniors. We estimated that the proportions of people at risk would decrease by 13%, 6%, 2% and 2% respectively under the new China National Standards - GB 2760-2014 National Food Safety for Standards for using food additives. The results indicated that aluminium from wheat flour and puffed products is unlikely to cause adverse health effects in the general population in Shanghai; however, children were at a higher risk of excess aluminium exposure. Significant improvements in reducing the dietary exposure to aluminium are expected in the population, especially for children after the implementation of GB 2760-2014.

  18. Dynamic behaviour of aluminium electrolysis tanks; Comportement dynamique des cuves d`electrolyse de l`aluminium. Simulation par la methode des elements finis

    Energy Technology Data Exchange (ETDEWEB)

    Michard, L.; Guillot, J.B.; Rist, A.

    1997-12-31

    This paper presents some examples of electrolysis tank calculations using the finite-element method in transient regime and with mobile mesh. The Hall-Heroult aluminium electrolysis process is considered in this modeling. The displacements of the liquids interface and the self-coating of the slope which involve important heat quantities are taken into account. (J.S.)

  19. Susceptibility factors and DNA adducts in peripheral blood mononuclear cells of aluminium smelter workers exposed to polycyclic aromatic hydrocarbons

    Energy Technology Data Exchange (ETDEWEB)

    Tuominen, Rainer; Warholm, Margareta; Rannug, Agneta [Institute of Environmental Medicine, Karolinska Institutet, Stockholm (Sweden); National Institute for Working Life, Stockholm (Sweden); Baranczewski, Pawel; Moeller, Lennart [Center for Nutrition and Toxicology, Karolinska Institutet, Huddinge (Sweden); Hagmar, Lars [Department of Occupational and Environmental Medicine, Lund University Hospital, (Sweden)

    2002-04-01

    Formation of DNA adducts as a result of exposure to polycyclic aromatic hydrocarbons (PAH) was studied in 98 potroom workers from an aluminium smelting plant and in 55 blue-collar workers without occupational PAH exposure. DNA from peripheral blood mononuclear cells (PBMC) was used for quantitation of individual PAH-DNA adducts by {sup 32}P-postlabelling/high performance liquid chromatography (HPLC) analysis. Four individual DNA adducts (denoted A, B, C and D) were quantified in 141 of a total of 153 subjects. Genetic polymorphisms for cytochrome P-4501A1 (CYP1A1), microsomal epoxide hydrolase, N-acetyltransferase 2, glutathione transferases M1, P1 and T1 (GSTM1, GSTP1 and GSTT1, respectively) and NAD(P)H: quinone oxidoreductase 1 (NQO1) were analysed. For 52 subjects, analysis of mRNA inducibility of CYP1A1 was performed. No statistically significant differences in the levels of total or individual DNA adducts A, C and D were found between potroom workers and control subjects. All potroom workers and the subgroup of potroom workers who reported to never/sometimes use personal respiratory protection (n=72) were found to have a significantly higher likelihood of having high levels of adduct B than control subjects [odds ratio (OR) =3.4 with 95% confidence interval (CI) of 1.3-9.2, and OR=4.2 with 95% CI 1.6-11.5, respectively]. In the subgroup, levels of adducts A and B were found to be significantly higher among workers with employment time of less than 6 months (n=5). Also, the levels of the individual DNA adducts were to some extent modified by genetic polymorphisms in CYP1A1, GSTM1, GSTP1 and NQO1 and by CYP1A1 inducibility. In conclusion, levels of adduct B, identified by {sup 32}P-postlabelling/HPLC methodology as an indicator of PAH exposure in aluminium production, were modified by the use of respiratory protection, length of employment and genetic polymorphisms. (orig.)

  20. CNTs tuning and vertical alignment in anodic aluminium oxide membrane

    Institute of Scientific and Technical Information of China (English)

    Maria Sarno; Diana Sannino; Caterina Leone; Paolo Ciambelli

    2012-01-01

    Anodic aluminium oxide (AAOM) membranes were used for template growth of carbon nanotubes (CNT) inside their pores by chemical vapour deposition (CVD) of different hydrocarbons,in the absence of transition metal catalyst.A composite material,containing one nanotube for each channel,having the same length as the membrane thickness and the external diameter close to the diameter of the membrane holes,was obtained.Yield,selectivity,and quality of CNTs in terms of diameter (up to very thin CNT),carbon order,length,arrangement (i.e.number of tubes for each channel),purity,that are critical requisites for several applications were optimized by investigating the effect of changing the hydrocarbon feedstock gas,also in the presence of hydrogen.The samples produced using methane as a feedstock have a well ordered structure.The role of the alumina channels surface during the CNT growth has been investigated and its catalytic activity has been proved for the first time.

  1. Thorium sorption in seawater suspensions of aluminium oxide particles

    Science.gov (United States)

    Niven, Sherry E. H.; Moore, Robert M.

    1993-05-01

    The partitioning of thorium between solid and solution phases in seawater suspensions of aluminium oxide particles was studied in controlled laboratory experiments to determine whether partitioning is consistent with current models of trace-metal adsorption (surface complexation models). Experimental conditions (i.e., thorium and particle concentrations, pH, temperature, salinity) were chosen to be as realistic as possible for coastal seawater while minimizing nonadsorptive processes; 234Th was used as a tracer of thorium, and filtration/ultrafiltration techniques were used to prepare suspensions with minimal colloidal material, as well as to define and to separate solid and solution phases. A comparison of the experimental results with relationships predicted by surface complexation models shows that thorium sorption in the alumina suspensions was consistent with surface complexation theory: Sorption kinetics were consistent with a (pseudo-) first-order reversible reaction at constant particle concentration, the pseudo-first-order forward rate constants had a first-order dependence on particle concentration, and Kd values were independent of particle concentration. Thorium sorption consisted of two distinct reversible reactions, both of which were consistent with surface complexation theory. Second order rate constants were within the range of rate constants reported for the adsorption of divalent metal ions ontoγ-Al 2O 3 surfaces.

  2. Anode characterisation and gas diffusion behaviour in aluminium smelting

    Science.gov (United States)

    Putri, Epma; Brooks, Geoffrey; Snook, Graeme; Eick, Ingo

    2017-01-01

    Over the past century, significant research on different aspects of the Hall-Héroult process has been conducted to increase energy efficiency. Bubble generation at the anode reaction and its contribution to the overall voltage drop in aluminium production holds significant potential for energy saving, yet the details of the gas transport mechanism for bubble nucleation behaviour are not completely understood. The multi-step electrochemical reaction releases predominantly CO2 gas along with CO gas, which is a reduction product formed by reaction of CO2 with the anode carbon. Complicating the reaction is the multiple paths by which the gas can diffuse (either through the porous anode or the electrolyte bath). There has been no detailed investigation of the correlation between gas diffusion as a function of anode and bath properties. In the present study, the porosity measurement techniques in the anode will be used to understand the relation of gas diffusion and anode properties. A porosimetric study was conducted for two different anode samples using mercury intrusion porosimetry (MIP) and hydrostatic method. The MIP method provides important anode properties information such as density, percent porosity, pore size distribution, permeability, and tortuosity factor which affect gas diffusion and anode performance. The Knudsen number obtained from MIP data shows both Knudsen diffusion and molecular diffusion need to be considered when predicting the effective diffusion.

  3. Heterometallic aluminates: alkali metals trapped by an aluminium aryloxide claw.

    Science.gov (United States)

    Muñoz, M Teresa; Cuenca, Tomás; Mosquera, Marta E G

    2014-10-14

    A series of heterometallic aluminium-alkali metal species [AlMMe2{2,6-(MeO)2C6H3O}2]n have been isolated for lithium, sodium and potassium. These compounds can be generated by the reaction of [AlMe2{2,6-(MeO)2C6H3O}]2 with the metallated phenol [M{2,6-(MeO)2C6H3O}]n or through the reaction of the mixture of AlMe3 and the appropriate alkali metal alkyl base with two equivalents of 2,6-dimethoxyphenol. In the heterometallic species obtained, the {AlMe2{2,6-(MeO)2C6H3O}2}(-) moiety is observed and could be described as a claw which fixes the alkali ion by the phenoxide oxygen atoms while the methoxy groups help to stabilize their coordination sphere. All compounds have been characterized by NMR spectroscopy and X-ray diffraction methods. Catalytic studies reveal that these compounds are active in ring-opening polymerization of L-lactide.

  4. Anodization of Aluminium using a fast two-step process

    Indian Academy of Sciences (India)

    Murugaiya Sridar Ilango; Amruta Mutalikdesai; Sheela K Ramasesha

    2016-01-01

    Ultra-fast two-step anodization method is developed for obtaining ordered nano-pores on aluminium (Al) foil. First anodization was carried out for 10 min, followed by 3 min of second anodization at high voltage (150 V) compared to previous reports of anodization times of 12 h (40-60 V). The pore dimensions on anodized alumina are 180 nm for pore diameter and 130 nm for inter-pore distance. It was evident that by increasing the anodization voltage to 150 V, the diameter of the pores formed was above 150 nm. The electrolyte and its temperature affect the shape and size of the pore formation. At lower anodization temperature, controlled pore formation was observed. The anodized samples were characterized using the field emission scanning electron microscope (FE-SEM) to determine the pore diameter and inter-pore distance. Using UVVisible spectroscopy, the reflectance spectra of anodized samples were measured. The alumina (Al2O3) peaks were identified by x-ray diffraction (XRD) technique. The x-ray photo electron spectroscopy (XPS) analysis confirmed the Al 2p peak at 73.1 eV along with the oxygen O 1s at 530.9 eV and carbon traces C 1s at 283.6 eV.

  5. Speciation of aluminium, arsenic and molybdenum in excessively limed lakes.

    Science.gov (United States)

    Sjöstedt, Carin; Wällstedt, Teresia; Gustafsson, Jon Petter; Borg, Hans

    2009-09-01

    The possible existence of the potentially toxic oxyanions of Al (Al(OH)(4)(-)), As (HAsO(4)(2-)), and Mo (MoO(4)(2-)) was examined in excessively limed lakes. In-situ dialysis (MWCO 1 kDa) was performed in the surface and bottom waters of two excessively limed lakes (pH 7.1-7.7) and one acidic lake (pH approximately 5.4). The dialysable metal concentrations were compared to the equilibrium distribution of species as calculated with the geochemical code Visual MINTEQ incorporating the CD-MUSIC and Stockholm Humic models for complexation onto colloidal ferrihydrite and dissolved organic matter. Arsenic and molybdenum in the excessively limed lakes were to a large extent present in the dialysable fraction (>79% and >92% respectively). They were calculated to exist as free or adsorbed oxyanions. Most of the Al was observed to reside in the colloidal fraction (51-82%). In agreement with this, model predictions indicated aluminium to be present mostly as colloids or bound to dissolved organic matter. Only a small fraction was modelled as Al(OH)(4)(-) ions. In most cases, modelled values were in agreement with the dialysis results. The free concentrations of the three oxyanions were mostly low compared to toxic levels.

  6. Speciation of aluminium, arsenic and molybdenum in excessively limed lakes

    Energy Technology Data Exchange (ETDEWEB)

    Sjoestedt, Carin, E-mail: carinsj@kth.se [Department of Land and Water Resources Engineering, KTH (Royal Institute of Technology), Teknikringen 76, SE-100 44 Stockholm (Sweden); Waellstedt, Teresia [Department of Aquatic Sciences and Assessment, SLU (Swedish University of Agricultural Sciences), P.O. Box 7050, SE-750 07 Uppsala (Sweden); Gustafsson, Jon Petter [Department of Land and Water Resources Engineering, KTH (Royal Institute of Technology), Teknikringen 76, SE-100 44 Stockholm (Sweden); Borg, Hans [Department of Applied Environmental Science, SU (Stockholm University), SE-106 91 Stockholm (Sweden)

    2009-09-01

    The possible existence of the potentially toxic oxyanions of Al (Al(OH){sub 4}{sup -}), As (HAsO{sub 4}{sup 2-}), and Mo (MoO{sub 4}{sup 2-}) was examined in excessively limed lakes. In-situ dialysis (MWCO 1 kDa) was performed in the surface and bottom waters of two excessively limed lakes (pH 7.1-7.7) and one acidic lake (pH {approx} 5.4). The dialysable metal concentrations were compared to the equilibrium distribution of species as calculated with the geochemical code Visual MINTEQ incorporating the CD-MUSIC and Stockholm Humic models for complexation onto colloidal ferrihydrite and dissolved organic matter. Arsenic and molybdenum in the excessively limed lakes were to a large extent present in the dialysable fraction (> 79% and > 92% respectively). They were calculated to exist as free or adsorbed oxyanions. Most of the Al was observed to reside in the colloidal fraction (51-82%). In agreement with this, model predictions indicated aluminium to be present mostly as colloids or bound to dissolved organic matter. Only a small fraction was modelled as Al(OH){sub 4}{sup -} ions. In most cases, modelled values were in agreement with the dialysis results. The free concentrations of the three oxyanions were mostly low compared to toxic levels.

  7. Optimal modifying and refining processes for A356 aluminium alloys

    Institute of Scientific and Technical Information of China (English)

    ZUO Xiu-rong; ZHONG Zhi-guo

    2006-01-01

    The influence of Ti, B, RE (cerium-rich mixtures of rare earth) and Sr, applied in modification and refining processes, on A356 aluminum alloys has been studied with the aids of OM, etc. The results show that the grain refining efficiency of Grain-Refining Aluminium Ingot (GRAI) and Al-Ti master alloys is similar. But the Ti addition from GRAI has lower costs than that with Al-Ti master alloys. So A356 aluminum alloys produced with GRAI are feasible in economy.Grain refining with GRAI with 0.01%Ti plus additional 0.03% B offers significant advantages over that from GRAI with 0.1% Ti only in A356 aluminum alloys, which made the dendrite α (Al) grain structure transform into equiaxed α (Al) grain structure, plus a partially modified eutectic silicon structure. RE addition to A356 aluminum alloys with Sr modifier is enable to achieve small DAS,reduced pores, well-refined fibrous silicon, small and dispersive eutectic colonies.

  8. Repassivation Investigations on Aluminium: Physical Chemistry of the Passive State

    Science.gov (United States)

    Nagy, Tristan Oliver; Weimerskirch, Morris Jhängi Joseph; Pacher, Ulrich; Kautek, Wolfgang

    2016-09-01

    We show the temporal change in repassivation mechanism as a time-dependent linear combination of a high-field model of oxide growth (HFM) and the point defect model (PDM). The observed switch in transient repassivation current-decrease under potentiostatic control occurs independently of the active electrode size and effective repassivation time for all applied overpotentials. For that, in situ depassivation of plasma electrolytically oxidized (PEO) coatings on aluminium was performed with nanosecond laser pulses at 266 nm and the repassivation current transients were recorded as a function of pulse number. A mathematical model combines the well established theories of oxide-film formation and growth kinetics, giving insight in the non linear transient behaviour of micro-defect passivation. According to our findings, the repassivation process can be described as a charge consumption via two concurrent channels. While the major current-decay at the very beginning of the fast healing oxide follows a point-defect type exponential damping, the HFM mechanism supersedes gradually, the longer the repassivation evolves. Furthermore, the material seems to reminisce former laser treatments via defects built-in during depassivation, leading to a higher charge contribution of the PDM mechanism at higher pulse numbers.

  9. Preparation of polymeric aluminium ferric chloride from bauxite tailings

    Directory of Open Access Journals (Sweden)

    Ma D.

    2013-01-01

    Full Text Available Bauxite tailings are the main solid wastes in the ore dressing process. The Al2O3 and Fe2O3 contents in bauxite tailings can reach 50% and 13% respectively. The present study proposed a feasible method to use bauxite tailings to prepare polymeric aluminium ferric chloride (PAFC, a new composite inorganic polymer for water purification. Bauxite tailings roasted reacting with hydrochloric acid under air, pickle liquor which mainly contains Fe3+, Al3+ was generated, then calcium aluminate was used to adjust pH value and the basicity of the pickle liquor, the PAFC was subsequently prepared after the polymerization process. The optimal synthesizing parameters for the preparation of PAFC obtained were as follows: the concentration of hydrochloric acid of 24 wt%, ratio of hydrochloric acid to bauxite tailings of 6:1, temperature of 90ºC, leaching time of 2.5 hours, ration of pickle liquor to calcium aluminate of 12:1, polymerization temperature of 90ºC and polymerization time of about 3 hours. The basicity of PAFC was higher than 68%, the sum concentration of Al2O3 and Fe2O3 was beyond 12.5%. The results of flocculation tests indicate that the PAFC has a better performance of removing the turbidity of wastewater compared to PAC, and PAFC prepared by bauxite tailings is a kind of high quality flocculants.

  10. Nano-crystalline P/M aluminium for automotive applications

    Science.gov (United States)

    Hummert, K.; Schattevoy, R.; Broda, M.; Knappe, M.; Beiss, P.; Klubberg, F.; Schubert, T. H.; Leuschner, R.

    2009-01-01

    The reduction of total vehicle weight and lowering of moving masses within the engine are key elements to overcome future emission challenges of the automotive industry. Within a German BMBF funded project the melt spinning technology will be driven to a series production status. The very fast cooling condition of the melt leads to a nano-structure of the aluminium material. This results in new material properties of known alloys. The strength increases dramatically without lowered forming behaviour. With this process the freedom of designing complex alloys is very flexible. Different alloys have been investigated for several applications, where high strength at room and elevated temperatures and/or high wear resistance is required. This paper presents some results regarding the processing, microstructure and mechanical properties of a developed Al-Ni-Fe alloy. This joined research project with partners from the automotive industry as well as automotive suppliers and universities is funded by the German BMBF "NanoMobile" Program under Project number 03X3008.

  11. Microextraction Methods for Preconcentration of Aluminium in Urine Samples

    Directory of Open Access Journals (Sweden)

    Farzad Farajbakhsh, Mohammad Amjadi, Jamshid Manzoori, Mohammad R. Ardalan, Abolghasem Jouyban

    2016-07-01

    Full Text Available Background: Analysis of aluminium (Al in urine samples is required in management of a number of diseases including patients with renal failure. This work aimed to present dispersive liquid-liquid microextraction (DLLME and ultrasound-assisted emulsification microextraction (USAEME methods for the preconcentration of ultra-trace amount of aluminum in human urine prior to its determination by a graphite furnace atomic absorption spectrometry (GFAAS. Methods: The microextraction methods were based on the complex formation of Al3+ with 8-hydroxyquinoline. The effect of various experimental parameters on the efficiencies of the methods and their optimum values were studied. Results: Under the optimal conditions, the limits of detection for USAEME-GFAAS and DLLME-GFAAS were 0.19 and 0.30 ng mL−1, respectively and corresponding relative standard deviations (RSD, n=5 for the determination of 40 ng mL−1 Al3+ were 5.9% and 4.9%. Conclusion: Both methods could be successfully used to the analysis of ultra trace concentrations of Al in urine samples of dialysis patients.

  12. Epitaxial growth of silicon nanowires using an aluminium catalyst.

    Science.gov (United States)

    Wang, Yewu; Schmidt, Volker; Senz, Stephan; Gösele, Ulrich

    2006-12-01

    Silicon nanowires have been identified as important components for future electronic and sensor nanodevices. So far gold has dominated as the catalyst for growing Si nanowires via the vapour-liquid-solid (VLS) mechanism. Unfortunately, gold traps electrons and holes in Si and poses a serious contamination problem for Si complementary metal oxide semiconductor (CMOS) processing. Although there are some reports on the use of non-gold catalysts for Si nanowire growth, either the growth requires high temperatures and/or the catalysts are not compatible with CMOS requirements. From a technological standpoint, a much more attractive catalyst material would be aluminium, as it is a standard metal in Si process lines. Here we report for the first time the epitaxial growth of Al-catalysed Si nanowires and suggest that growth proceeds via a vapour-solid-solid (VSS) rather than a VLS mechanism. It is also found that the tapering of the nanowires can be strongly reduced by lowering the growth temperature.

  13. Multifaceted effects of aluminium in neurodegenerative diseases: A review.

    Science.gov (United States)

    Maya, S; Prakash, T; Madhu, Krishna Das; Goli, Divakar

    2016-10-01

    Aluminium (Al) is the most common metal and widely distributed in our environment. Al was first isolated as an element in 1827, and its use began only after 1886. Al is widely used for industrial applications and consumer products. Apart from these it is also used in cooking utensils and in pharmacological agents, including antacids and antiperspirants from which the element usually enters into the human body. Evidence for the neurotoxicity of Al is described in various studies, but still the exact mechanism of Al toxicity is not known. However, the evidence suggests that the Al can potentiate oxidative stress and inflammatory events and finally leads to cell death. Al is considered as a well-established neurotoxin and have a link between the exposure and development of neurodegenerative diseases, including Amyotrophic Lateral Sclerosis (ALS), Alzheimer's disease (AD), dementia, Gulf war syndrome and Parkinsonism. Here, we review the detailed possible pathogenesis of Al neurotoxicity. This review summarizes Al induced events likewise oxidative stress, cell mediated toxicity, apoptosis, inflammatory events in the brain, glutamate toxicity, effects on calcium homeostasis, gene expression and Al induced Neurofibrillary tangle (NFT) formation. Apart from these we also discussed animal models that are commonly used for Al induced neurotoxicity and neurodegeneration studies. These models help to find out a better way to treat and prevent the progression in Al induced neurodegenerative diseases.

  14. Pattern recognition in the automatic inspection of aluminium castings

    Energy Technology Data Exchange (ETDEWEB)

    Mery, D. [Univ. de Santiago de Chile, Santiego (Chile); Silva, R.R. da; Rebello, J.M.A. [Univ. Federal do Rio de Janeiro (Brazil). Eng. Metalurgical/Materiais; Caloba, L.P. [Univ. Federal do Rio de Janeiro (Brazil). Eng. Electronica

    2003-07-01

    In this paper, we report the results obtained recently by analysing around 400 features measured from 23.000 regions segmented in 50 radioscopic images of cast aluminium wheels with defects. The extracted features are divided into two groups: geometric features (area, perimeter, height, width, roundness, Fourier descriptors, invariant moments, and other shape factors) and grey value features (mean grey value, mean gradient in the boundary, mean second derivate in the region, radiographic contrasts, invariant moments with grey value information, local variance, textural features based on the co-occurrence matrix, coefficients of the discrete Fourier transform, the Karhunen Loeve transform and the discrete cosine transform). We propose a new contrast feature obtained from grey level profiles along straight lines crossing the segmented potential defects. Analysing the area Az under the receiver operation characteristic (ROC) curve, this feature presents the best individual detection performance yielding an area Az=0.9944. In order to make a compact pattern representation and a simple decision strategy, the number of features are reduced using feature selection approaches. The relevance of the selected features is evaluated by calculation of linear correlation coefficient. The results are shown in tables of the linear correlation coefficients between features, and among features and class of defect. In addition, statistical classifiers and classifiers based on neural networks are implemented in order to establish decision boundaries in the space of the selected features which separate patterns (our segmented regions) belonging to two different classes (regular structure or defects).

  15. Removal of fluoride from water using aluminium containing compounds

    Institute of Scientific and Technical Information of China (English)

    M. Karthikeyan; K. P. Elango

    2009-01-01

    Batch adsorption studies were undertaken to assess the suitability of aluminium titanate (AT) and bismuth aluminate (BA) to remove fluoride ions from water.The effect of pH,dose of adsorbent,contact time,initial concentration,co-ions and temperature on fluoride removal efficiency were studied.The amounts of fluoride ions adsorbed,at 30℃ from 4 mg/L of fluoride ion solution,by AT and BA are 0.85 and 1.55 mg/g,respectively.The experimental data fitted well to the Freundlich and Langmuir isotherms.Thermodynamic parameters such as △H~0,△S~0 and △G~0 indicated that the removal of fluoride ions by AT is exothermic and non-spontaneous while that by BA is endothermic and spontaneous.Furrier transform infrared (FT-IR) analysis and X-ray diffraction (XRD) patterns of the adsorbent before and after adsorption indicated that fluoride ions are chemisorbed by these adsorbents.

  16. Mushy Zone Properties and Castability of Aluminium Foundry Alloys

    Energy Technology Data Exchange (ETDEWEB)

    Dahle, A.K.

    1996-01-01

    The growing application and market share of aluminium castings demand better understanding of the mechanisms of defect formation during casting. Although casting is a cost-effective production route, inadequate reproducibility and quality of the cast structure often restrict the utilization of castings. This doctoral thesis aims to (1) determine how the solidification conditions affect the rheological behaviour in the partially solidified state, (2) to measure how alterations in solidification variables influence castability, and (3) to investigate the relationship between mushy zone rheology and castability. The development of mechanical strength in the mushy zone was measured as a function of chemical composition. Measurements of the dendrite coherency point provided accurate determination of the point where the dendrite network is established. The strength measurements confirm that the dendrites are largely independent and free-floating before dendrite coherency. The point and rate of strength development in the subsequently established interdendritic network strongly depend on the size and morphology of the dendrites and fraction solid. The castability investigation was limited to evaluations of fluidity and feeding. Fluidity measurements showed a complex effect of increased grain refinement. Alterations of the concentration and type of main alloying element gave a direct relationship between mushy zone rheology and fluidity. The range of the operating feeding mechanisms during solidification is directly related to the rheological properties of the mushy zone. 251 refs., 77 refs., 25 tabs.

  17. On the compression of aluminium foam structures under shock

    Science.gov (United States)

    Townsend, D.; Parry, S.; Bourne, N. K.; Withers, P. J.; Wood, D. C.; Appleby-Thomas, G. J.; Hameed, A.

    2017-01-01

    Foam-based materials have an important role as both blast and impact mitigators, with their extended sub-surface structures providing multiple redundant routes for load management and distribution in the event of failure. In order to further elucidate underlying stress management mechanisms at high strain-rates, here, open cell and closed cell Aluminium were investigated via the plate-impact technique. These experiments allowed the material to be loaded under a macroscale one-dimensional state of strain. The nature of pore collapse was monitored via manganin stress gauges at the target rear surface, with resultant data related back to changes in microstructure via microstructural analysis of both un-impacted and recovered target material. Results indicated crushing of the open cell foam occurred without retarding the flyer plate and the observed shock pressures suggested the degree of compaction increased with impact velocity. The higher density closed cell foam caused significant deceleration of the flyer plate during passage through the specimen and significantly lower shock pressures were observed at the anvil compared to the open cell material.

  18. Microstructure and properties of hot compacted powders of aluminium alloys.

    Science.gov (United States)

    Lityńska-Dobrzyńska, L; Dutkiewicz, J; Maziarz, W; Kanciruk, A

    2009-11-01

    Atomized 6061 aluminium alloy powders with and without the addition of 2 wt% Zr were milled for 80 h in a planetary ball mill and hot pressed in vacuum. The milled powders showed microhardness of about 170 HV, which increased after hot pressing up to 260 HV and up to 280 HV for powders without and with the Zr additions, respectively. Compression tests showed the high yield stress of 300 MPa obtained for the hot-pressed sample produced from the initial powders compared with ultimate compression strength of above 800 MPa for that of the milled sample and slightly higher for that with Zr additions. The effect of hot pressing on the structure of powders was investigated using a conventional analytical and high-resolution electron microscopy and high angle annular dark-field scanning transmission electron microscopy combined with energy dispersive X-ray microanalysis. The samples of initial powders hot pressed in vacuum showed a cell structure with particles of the Mg(2)Si and AlFeSi phases in intercell areas. In the milled and hot-pressed sample, the homogeneous structure of small grains of size below 200 nm was observed. The AlFeSi and Mg(2)Si particles with size 20-100 nm were uniformly distributed as well as the Zr rich particles in the Zr containing alloy. The Zr-rich particles containing up to 80 at% Zr were identified as a metastable fcc cubic phase with lattice parameter a= 0.48 nm.

  19. Metal borohydride formation from aluminium boride and metal hydrides.

    Science.gov (United States)

    Møller, Kasper T; Fogh, Alexander S; Paskevicius, Mark; Skibsted, Jørgen; Jensen, Torben R

    2016-10-05

    Metal borides are often decomposition products from metal borohydrides and thus play a role in the reverse reaction where hydrogen is absorbed. In this work, aluminium boride, AlB2, has been investigated as a boron source for the formation of borohydrides under hydrogen pressures of p(H2) = 100 or 600 bar at elevated temperatures (350 or 400 °C). The systems AlB2-MHx (M = Li, Na, Mg, Ca) have been investigated, producing LiBH4, NaBH4 and Ca(BH4)2, whereas the formation of Mg(BH4)2 was not observed at T = 400 °C and p(H2) = 600 bar. The formation of the metal borohydrides is confirmed by powder X-ray diffraction and infrared spectroscopy and the fraction of boron in AlB2 and M(BH4)x is determined quantitatively by (11)B MAS NMR. Hydrogenation for 12 h at T = 350-400 °C and p(H2) = 600 bar leads to the formation of substantial amounts of LiBH4 (38.6 mol%), NaBH4 (83.0 mol%) and Ca(BH4)2 (43.6 mol%).

  20. A Genetic Analysis of Aluminium Tolerance in Cereals

    Directory of Open Access Journals (Sweden)

    Sheeba Navakode

    2010-12-01

    Full Text Available Aluminium (Al toxicity is a major threat to agricultural production world wide wherever acid soil exists. Wheat and barley, the major food and feed crops, are severely affected and this necessitates investigations that could help to improve the yield by utilising the available genetic diversity for Al tolerance with the aid of several molecular platforms. We investigated the quantitative trait loci (QTL conferring tolerance to Al toxicity in three different mapping populations of wheat and barley.Using a set of D genome (Ae. tauschii introgression lines, a major Al tolerance locus was assigned to chromosome arm 4DL, explaining 31% of the phenotypic variation displayed by the population. A second major QTL was mapped to chromosome arm 3BL using a set of doubled haploid progeny lines. This major QTL, QaltCS.ipk-3B, originated from ‘Chinese Spring’ accounted for 49% of the variation in the population. The inheritance for Al tolerance in barley was dissected based on a genetic map constructed with genic markers. QTLs were identified on chromosomes 2H, 3H and 4H. A sequence homology search was used to derive the putative function of the genes linked to the QTL, in order to identify potential candidate genes for Al tolerance. Some of these candidates are implicated in stress/defence responses, in particular, stress signal transduction, transcription regulation factors and cell metabolism.

  1. A Genetic Analysis of Aluminium Tolerance in Cereals

    Directory of Open Access Journals (Sweden)

    Sheeba Navakode

    2014-02-01

    Full Text Available Aluminium (Al toxicity is a major threat to agricultural production world wide wherever acid soil exists. Wheat and barley, the major food and feed crops, are severely affected and this necessitates investigations that could help to improve the yield by utilising the available genetic diversity for Al tolerance with the aid of several molecular platforms. We investigated the quantitative trait loci (QTL conferring tolerance to Al toxicity in three different mapping populations of wheat and barley. Using a set of D genome (Ae. tauschii introgression lines, a major Al tolerance locus was assigned to chromosome arm 4DL, explaining 31% of the phenotypic variation displayed by the population. A second major QTL was mapped to chromosome arm 3BL using a set of doubled haploid progeny lines. This major QTL, QaltCS.ipk-3B, originated from ‘Chinese Spring’ accounted for 49% of the variation in the population. The inheritance for Al tolerance in barley was dissected based on a genetic map constructed with genic markers. QTLs were identified on chromosomes 2H, 3H and 4H. A sequence homology search was used to derive the putative function of the genes linked to the QTL, in order to identify potential candidate genes for Al tolerance. Some of these candidates are implicated in stress/defence responses, in particular, stress signal transduction, transcription regulation factors and cell metabolism.

  2. 新型高威力含铝硝铵炸药的研究%A New High Strength Ammonium Nitrate Powdery Explosive Containing Aluminium

    Institute of Scientific and Technical Information of China (English)

    陆明; 吕春绪; 刘祖亮

    2001-01-01

    A new type high strength ammonium nitrate powdery explosive containing aluminium is manufactured by mixing oxidizer, a kind of expanded ammonium nitrate, which possesses many microholes and self-sensitivity, with reducing agent, which is the mixture of wood powder, composite fuel oil and aluminium powder. By mathematical model for prescription design and optimization of the industrial explosive which contains chemical elements such as C,H,O,N,Al and experimental research, a good prescription of powdery ammonium nitrate explosive containing aluminium powder is obtained, the formulation is expanded ammonium nitrate 85.5 %~89.5 %, wood powder 3.5 %~4.5 %,composite fuel oil 2.0 %~3.0 %,aluminium powder 5.0 %~7.0 %. The explosion property parameters of this kind of commercial explosive are detonation velocity (32 mm)3 600~3 800 m/s,brisance 16.00~17.00 mm, sensitivity to initial detonation 12~14 cm, strength 370~390 mL,charge density 0.92~0.95 g/cm3. The relation between the amount of aluminium power in explosive and explosion property is also discussed in this paper, when the amount of aluminium power in ammonium nitrate explosive is 6.5 %~7.0 %,the strength arrives maximum.%该文以一种含有大量微气泡、自身敏化的膨化硝酸铵为氧化剂,以木粉、燃料油和铝粉为还原剂,制成新型高威力含铝硝铵炸药。通过建构含C、H、O、N、Al元素工业炸药配方设计及最优化的数学模型,计算得到含铝硝铵炸药的较佳配方为硝酸铵85.5 %~89.5 %、木粉3.5 %~4.5 %、复合油相2.0 %~3.0 %、铝粉5.0 %~7.0 %。该炸药的爆炸性能为:装药密度0.91~95 g/cm3,爆速3 600~3 800 m/s,殉爆距离12~14 cm,猛度16~17 mm,作功能力370~390 mL。文中还讨论了含铝硝铵炸药中铝粉含量与爆炸性能的关系

  3. Optical oxygen-sensing properties of porphyrin derivatives anchored on ordered porous aluminium oxide plates.

    Science.gov (United States)

    Araki, Naoko; Amao, Yutaka; Funabiki, Takuzo; Kamitakahara, Masanobu; Ohtsuki, Chikara; Mitsuo, Kazunori; Asai, Keisuke; Obata, Makoto; Yano, Shigenobu

    2007-07-01

    An optical oxygen-sensing activity of anchored porphyrin derivatives on ordered porous aluminium oxide plates was studied in relevance to development of new oxygen-sensing systems. Porphyrin derivatives, 5,10,15,20-tetrakis(4-carboxylundecane-1-oxy)porphyrin, 5-[4-(11-carboxylundecane-1-oxy)-10,15,20-triphenyl]porphyrin, 5-(4-carboxylphenyl)-10,15,20-triphenylporphyrin, and their platinum complexes, 5,10,15,20-tetrakis(4-carboxylundecane-1-oxy)porphyrinatoplatinum(II), 5-[4-(11-carboxylundecane-1-oxy)-10,15,20-triphenyl]porphyrinatoplatinum(II), 5-(4-carboxylphenyl)-10,15,20-triphenylporphyrinatoplatinum(II), were synthesized and anchored by an equilibrium adsorption method on aluminium oxide plates, which were prepared by an anodic oxidation. The excitation spectra of the porphyrin-anchored layers showed a broadened and blue-shifted Soret band compared with the corresponding porphyrins in DMSO. The luminescence intensity decreased with increasing oxygen concentrations. The oxygen-sensing ability estimated from I(0)/I(100) (I(0) and I(100) denote the luminescence intensity in 0 and 100% oxygen) was 9.08, 6.78, 8.71, 81.9, 35.5, and 39.1, which are greater than those of corresponding porphyrin derivatives in DMSO under the measured conditions, and indicates the remarkable enhancement effect of platinum(II). Non-linear Stern-Volmer plots were well fitted by the two component system to give the oxygen-sensitive constant (K(SV1)/%(-1)), the oxygen-insensitive constant (K(SV2)/%(-1)), and the former contribution (f(1)): 0.232, 3.32 x 10(-2), and 0.642; 0.141, 2.05 x 10(-2), and 0.687; 0.143, 1.05 x 10(-2), and 0.882; 17.3, 7.04 x 10(-3), and 0.980; 10.2, 1.43 x 10(-2), and 0.935; 16.3, 8.35 x 10(-3), and 0.954. The response time for the change of the atmospheric gas from argon to oxygen was 9.4 s, 12.5 s, 9.6 s, 5.0 s, 8.9 s, and 4.6 s, indicating the shortening effect of platinum. The reverse effect of platinum was observed in the change from oxygen to argon: 15.5 s

  4. Review on Histological and Functional Effect of Aluminium Chloride on Cerebral Cortex of the Brain

    Directory of Open Access Journals (Sweden)

    Birhane Alem Berihu

    2015-08-01

    Full Text Available Various findings are give emphasis to Aluminium has more and more obvious disturbance of the brain other body organs. The purpose of this review is to give a comprehensive report of the existing data on Aluminium induced brain toxicity in different animal models. Along with, we also have made an attempt to present the possible mechanism related to aluminium induced brain toxicity suggested by various researchers. We used 62 different published materials for the compilation of this review article. Google search engine was used for accessing published materials from databases like google scholar, pubmed and hinari. The focus is on Al levels in brain, region-specific and subcellular distribution, mechanism of aluminium on neurotoxicity, histological change and neurobehavioral alternations. The present analysis indicated that AlCl3 showed to be neurotoxin chemical by affecting the biochemical content of brain, histological alternation of cerebral cortex of the brain, disrupting behavioral activities. However, whether aluminium is a sole factor in neurodegeneration, histological alternation of cerebral cortex of the brain still needs to be understood.

  5. Effect of aluminium in propellant composition on acoustic emission parameters (Short Communication

    Directory of Open Access Journals (Sweden)

    Rm. Muthiah

    2001-04-01

    Full Text Available The study reports the variation in acoustic emission signals acquired during combustion of typical propellants with varying aluminium and ammonium perchlorate content. It was observed that when propellant strands having the same composition undergo combustion under similar conditions, they produce consistent acoustic emission signals. To study the effect of variation of aluminium content in the propellant composition on the acoustic emission produced during combustion, the aluminium content was varied from 6 per cent to 18 per cent in a HTPB-based composite propellant with 86 per cent solid loading. Experiments were carried out with propellant strands under the same conditions for a comparative study. Acoustic emission parameters, such as peak amplitude, ring-down counts, average frequency, hits and energy were studied as functions of time. Among these parameters, only energy ring-down counts and frequency varied significantly with aluminium content. The effect of cumulative values of energy, frequency and ring-down counts, the effect of burn rate and theoretical specific impulse against the aluminium percentage variation, and the variation of specific impulse against acoustic energy can all be correlated. The clear trend is indicative of possible prediction of propellant performance parameter like specific impulse from acoustic emission parameters.

  6. Protection of aluminium foil AA8021 by molybdate-based conversion coatings

    Science.gov (United States)

    Liang, Chang-Sheng; Lv, Zhong-Fei; Zhu, Ye-Ling; Xu, Shi-Ai; Wang, Hong

    2014-01-01

    A quick method for surface treatment of aluminium foil with environment-friendly and effective molybdate-based coating was developed in this study. Aluminium foil samples were treated with molybdate-based solution. The microstructure and composition of the resulting molybdate-based conversion coatings were explored by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray photoelectric spectroscopy (XPS). We found that the molybdate-based conversion coating was composed mainly of MoO3, (MoO3)x(P2O5)y and Al2(MoO4)3 compounds. Furthermore, corrosion resistance of the treated aluminium foil was evaluated by electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization. Our results show that all of the aluminium foils with molybdate-based conversion coatings have much better corrosion resistance than bare aluminium foil. Notably, the sample treated at 40 °C exhibited the best corrosion resistance. The new method is very suitable for continuous processing.

  7. Assessment of the cytotoxicity of aluminium oxide nanoparticles on selected mammalian cells.

    Science.gov (United States)

    Radziun, E; Dudkiewicz Wilczyńska, J; Książek, I; Nowak, K; Anuszewska, E L; Kunicki, A; Olszyna, A; Ząbkowski, T

    2011-12-01

    The rapid development of nanotechnology raises both enthusiasm and anxiety among researchers, which is related to the safety use of the manufactured materials. Thus, the aim of this study was to investigate the effect of aluminium oxide nanoparticles on the viability of selected mammalian cells in vitro. The aluminium oxide nanoparticles were characterised using SEM and BET analyses. Based on Zeta (ζ) potential measurements and particle size distribution, the tested suspensions of aluminium oxide nanoparticles in water and nutrient solutions with or without FBS were classified as unstable. Cell viability, the degree of apoptosis induction and nanoparticles internalization into the cells were assessed after 24 h of cell exposure to Al2O3 nanoparticles. Our results confirm the ability of aluminium oxide nanoparticles to penetrate through the membranes of L929 and BJ cells. Despite this, there was no significant increase in apoptosis or decrease in cell viability observed, suggesting that aluminium oxide nanoparticles in the tested range of concentrations has no cytotoxic effects on the selected mammalian cells.

  8. Laser-Doping through Anodic Aluminium Oxide Layers for Silicon Solar Cells

    Directory of Open Access Journals (Sweden)

    Pei Hsuan Doris Lu

    2015-01-01

    Full Text Available This paper demonstrates that silicon can be locally doped with aluminium to form localised p+ surface regions by laser-doping through anodic aluminium oxide (AAO layers formed on the silicon surface. The resulting p+ regions can extend more than 10 μm into the silicon and the electrically active p-type dopant concentration exceeds 1020 cm−3 for the first 6-7 μm of the formed p+ region. Anodic aluminium oxide layers can be doped with other impurities, such as boron and phosphorus, by anodising in electrolytes containing the extrinsic impurities in ionic form. The ions become trapped in the formed anodic oxide during anodisation, therefore enabling the impurity to be introduced into the silicon, with aluminium, during laser-doping. This codoping process can be used to create very heavily doped surface layers which can reduce contact resistance on metallisation, whilst the deeper doping achieved by the intrinsic aluminium may act to shield the surface from minority carriers. laser-doping through AAO layers can be performed without introducing any voids in the silicon or fumes which may be harmful to human health.

  9. Micro/Nanostructure and Tribological Characteristics of Pressureless Sintered Carbon Nanotubes Reinforced Aluminium Matrix Composites

    Directory of Open Access Journals (Sweden)

    P. Manikandan

    2016-01-01

    Full Text Available This study reports the manufacture, microstructure, and tribological behaviour of carbon nanotube reinforced aluminium composites against pure aluminium. The specimens were fabricated using powder metallurgy method. The nanotubes in weight percentages of 0.5, 1.0, 1.5, and 2.0 were homogeneously dispersed and mechanically alloyed using a high energy ball milling. The milled powders were cold compacted and then isothermally sintered in air. The density of all samples was measured using Archimedes method and all had a relative density between 92.22% and 97.74%. Vickers hardness increased with increasing CNT fraction up to 1.5 wt% and then reduced. The microstructures and surfaces were investigated using high resolution scanning electron microscope (SEM. The tribological tests showed that the CNT reinforced composites displayed lower wear rate and friction coefficient compared to the pure aluminium under mild wear conditions. However, for severe wear conditions, the CNT reinforced composites exhibited higher friction coefficient and wear rate compared to the pure aluminium. It was also found that the friction and wear behaviour of CNT reinforced composites is significantly dependent on the applied load and there is a critical load beyond which CNTs could have adverse impact on the wear resistance of aluminium.

  10. Ultraviolet Plasmonic Aluminium Nanoparticles for Highly Efficient Light Incoupling on Silicon Solar Cells

    Directory of Open Access Journals (Sweden)

    Yinan Zhang

    2016-05-01

    Full Text Available Plasmonic metal nanoparticles supporting localized surface plasmon resonances have attracted a great deal of interest in boosting the light absorption in solar cells. Among the various plasmonic materials, the aluminium nanoparticles recently have become a rising star due to their unique ultraviolet plasmonic resonances, low cost, earth-abundance and high compatibility with the complementary metal-oxide semiconductor (CMOS manufacturing process. Here, we report some key factors that determine the light incoupling of aluminium nanoparticles located on the front side of silicon solar cells. We first numerically study the scattering and absorption properties of the aluminium nanoparticles and the influence of the nanoparticle shape, size, surface coverage and the spacing layer on the light incoupling using the finite difference time domain method. Then, we experimentally integrate 100-nm aluminium nanoparticles on the front side of silicon solar cells with varying silicon nitride thicknesses. This study provides the fundamental insights for designing aluminium nanoparticle-based light trapping on solar cells.

  11. Aluminium overload after 5 years in skin biopsy following post-vaccination with subcutaneous pseudolymphoma.

    Science.gov (United States)

    Guillard, Olivier; Fauconneau, Bernard; Pineau, Alain; Marrauld, Annie; Bellocq, Jean-Pierre; Chenard, Marie-Pierre

    2012-10-01

    Aluminium hydroxide is used as an effective adjuvant in a wide range of vaccines for enhancing immune response to the antigen. The pathogenic role of aluminium hydroxide is now recognized by the presence of chronic fatigue syndrome, macrophagic myofasciitis and subcutaneous pseudolymphoma, linked to intramuscular injection of aluminium hydroxide-containing vaccines. The aim of this study is to verify if the subcutaneous pseudolymphoma observed in this patient in the site of vaccine injection is linked to an aluminium overload. Many years after vaccination, a subcutaneous nodule was discovered in a 45-year-old woman with subcutaneous pseudolymphoma. In skin biopsy at the injection site for vaccines, aluminium (Al) deposits are assessed by Morin stain and quantification of Al is performed by Zeeman Electrothermal Atomic Absorption Spectrophotometry. Morin stain shows Al deposits in the macrophages, and Al assays (in μg/g, dry weight) were 768.10±18 for the patient compared with the two control patients, 5.61±0.59 and 9.13±0.057. Given the pathology of this patient and the high Al concentration in skin biopsy, the authors wish to draw attention when using the Al salts known to be particularly effective as adjuvants in single or repeated vaccinations. The possible release of Al may induce other pathologies ascribed to the well-known toxicity of this metal.

  12. Searching for new aluminium chelating agents: a family of hydroxypyrone ligands.

    Science.gov (United States)

    Toso, Leonardo; Crisponi, Guido; Nurchi, Valeria M; Crespo-Alonso, Miriam; Lachowicz, Joanna I; Mansoori, Delara; Arca, Massimiliano; Santos, M Amélia; Marques, Sérgio M; Gano, Lurdes; Niclós-Gutíerrez, Juan; González-Pérez, Josefa M; Domínguez-Martín, Alicia; Choquesillo-Lazarte, Duane; Szewczuk, Zbigniew

    2014-01-01

    Attention is devoted to the role of chelating agents in the treatment of aluminium related diseases. In fact, in spite of the efforts that have drastically reduced the occurrence of aluminium dialysis diseases, they so far constitute a cause of great medical concern. The use of chelating agents for iron and aluminium in different clinical applications has found increasing attention in the last thirty years. With the aim of designing new chelators, we synthesized a series of kojic acid derivatives containing two kojic units joined by different linkers. A huge advantage of these molecules is that they are cheap and easy to produce. Previous works on complex formation equilibria of a first group of these ligands with iron and aluminium highlighted extremely good pMe values and gave evidence of the ability to scavenge iron from inside cells. On these bases a second set of bis-kojic ligands, whose linkers between the kojic chelating moieties are differentiated both in terms of type and size, has been designed, synthesized and characterized. The aluminium(III) complex formation equilibria studied by potentiometry, electrospray ionization mass spectroscopy (ESI-MS), quantum-mechanical calculations and (1)H NMR spectroscopy are here described and discussed, and the structural characterization of one of these new ligands is presented. The in vivo studies show that these new bis-kojic derivatives induce faster clearance from main organs as compared with the monomeric analog.

  13. Tensile and fatigue behaviour of self-piercing rivets of CFRP to aluminium for automotive application

    Science.gov (United States)

    Kang, J.; Rao, H.; Zhang, R.; Avery, K.; Su, X.

    2016-07-01

    In this study, the tensile and fatigue behaviour of self-piercing rivets (SPRs) in carbon fibre reinforced plastic (CFRP) to aluminium 6111 T82 alloys were evaluated. An average maximum lap-shear tensile load capacity of 3858 N was achieved, which is comparable to metal-to-metal SPR lap-shear joints. The CFRP-Al SPRs failed in lap-shear tension due to pull-out of the rivet head from the CFRP upper sheet. The CFRP-Al SPR lap- shear specimens exhibited superior fatigue life compared to previously studied aluminium-to- aluminium SPR lap-shear joints. The SPR lap-shear joints under fatigue loads failed predominantly due to kinked crack growth along the width of the bottom aluminium sheet. The fatigue cracks initiated in the plastically deformed region of the aluminium sheet close to the rivet shank in the rivet-sheet interlock region. Scatter in fatigue life and failure modes was observed in SPR lap-shear specimens tested close to maximum tensile load.

  14. Severe cerebral congophilic angiopathy coincident with increased brain aluminium in a resident of Camelford, Cornwall, UK.

    Science.gov (United States)

    Exley, C; Esiri, M M

    2006-07-01

    In July 1988, 20 tonnes of aluminium sulphate was discharged by the South West Water Authority into the drinking water supplied to a large region of North Cornwall. Up to 20,000 people were exposed to concentrations of aluminium which were 500-3000 times the acceptable limit under European Union legislation (0.200 mg/l). Although this incident is currently the topic of a government inquiry, nothing is known about its longer-term repercussions on human health. The first neuropathological examination of a person who was exposed and died of an unspecified neurological condition was carried out. A rare form of sporadic early-onset beta amyloid angiopathy in cerebral cortical and leptomeningeal vessels, and in leptomeningeal vessels over the cerebellum was identified. In addition, high concentrations of aluminium were found coincident with the severely affected regions of the cortex. Although the presence of aluminium is highly unlikely to be adventitious, determining its role in the observed neuropathology is impossible. A clearer understanding of aluminium's role in this rare form of Alzheimer's related disease should be provided by future research on other people from the exposed population as well as similar neuropathologies in people within or outside this group.

  15. Why industry propaganda and political interference cannot disguise the inevitable role played by human exposure to aluminium in neurodegenerative diseases, including Alzheimer’s disease.

    OpenAIRE

    2014-01-01

    In the aluminium age it is clearly unpalatable for aluminium, the globe’s most successful metal, to be implicated in human disease. It is unpalatable because for approximately 100 years humans have reaped the rewards of the most abundant metal of the Earth’s crust without seriously considering the potential consequences for human health. The aluminium industry is a pillar of the developed and developing world and irrespective of the tyranny of human exposure to aluminium it cannot be challeng...

  16. Aluminium used as lightweight material for bodies of passenger vehicles; Aluminium als Karosserie-Leichtbauwerkstoff fuer Personenkraftwagen

    Energy Technology Data Exchange (ETDEWEB)

    Leitermann, W. [Audi NSU Auto Union AG, Neckarsulm (Germany)

    1995-12-31

    The Audi A8 is the first serial vehicle with an overall aluminium car body. The Space Frame construction has led to a weight reduction of 40% compared with steel, while the structural rigidity remains considerably high. The body consists of straight and bent extrusion profiles which are connected by vacuole diecast parts at the gussets. Sheet metals are mainly integrated as supporting parts into the structure. The applied alloys are hardenable AlSi-alloys. MIC arc welding, stamp riveting, clinching and resistance spot welding are applied as joining technologies. (orig.) [Deutsch] Die Audi A8 ist das erste Serienfahrzeug mit einer Vollaluminiumkarosserie. Die Space Frame Bauweise fuehrt zu einer Gewichtsreduzierung von 40% gegenueber Stahl, wobei die Struktursteifigkeit auf einem sehr hohen Niveau liegt. Die Struktur besteht aus geraden und gebogenen Strangpressprofilen, die in den Knotenpunkten durch Vacural-Druckgussteile miteinander verbunden sind. Blechteile werden zum Grossteil tragend in diese Struktur integriert. Bei den zum Einsatz kommenden Legierungen handelt es sich um aushaertbare AlSi-Legierungen. Als Verbindungstechnik wird das MIG-Schweissen, Stanznieten, Clinchen und Widerstandspunktschweissen eingesetzt. (orig.)

  17. Aluminium, carbonyls and cytokines in human nipple aspirate fluids: Possible relationship between inflammation, oxidative stress and breast cancer microenvironment.

    Science.gov (United States)

    Mannello, F; Ligi, D; Canale, M

    2013-11-01

    The human breast is likely exposed to Al (aluminium) from many sources including diet and personal care products. Underarm applications of aluminium salt-based antiperspirant provide a possible long-term source of exposure, especially after underarm applications to shaved and abraded skin. Al research in breast fluids likely reflects the intraductal microenvironment. We found increased levels of aluminium in noninvasively collected nipple aspirate fluids (NAF) from 19 breast cancer patients compared with 16 healthy control subjects (268 vs 131 μg/l, respectively; p Aluminium content and carbonyl levels showed a significant positive linear correlation (r(2) 0.6628, p aluminium salts) we also found a significantly increased levels of pro-inflammatory cytokines (IL-1β, IL-6, IL-12 p70, and TNF-α) and chemoattractant CC and CXC chemokines (IL-8, MIP-1α and MCP-1). In 12 invasive cancer NAF samples we found a significant positive linear correlation among aluminium, carbonyls and pro-inflammatory IL-6 cytokine (Y = 64.79x-39.63, r(2) 0.8192, p aluminium ions in oxidative and inflammatory status perturbations of breast cancer microenvironment, suggesting aluminium accumulation in breast microenvironment as a possible risk factor for oxidative/inflammatory phenotype of breast cells.

  18. Analysis of laser micro drilled holes through aluminium for micro-manufacturing applications

    Science.gov (United States)

    Tunna, L.; O'Neill, W.; Khan, A.; Sutcliffe, C.

    2005-09-01

    Conventional laser machining of aluminium with long wavelength lasers has its inherent problems due to the high reflectivity of aluminium to laser radiation (Handbook of Optics, vol 1, 2nd ed. New York: McGraw-Hill; 1995). Laser processing at shorter wavelengths reduces the reflectivity of the workpiece to the incident laser radiation and can also reduce the dimensions of the obtainable machining geometries. This paper reviews the limiting factors in the micro machining of aluminium using a diode pumped solid state (DPSS) Nd:YAG laser operated at 1064, 532, and 355 nm. The geometries of the laser-machined samples were investigated using interferometric, and optical methods to assess how the processing fluence and wavelength will affect the obtainable precision for successful integration of the laser in a micromachining CAD/CAM system.

  19. Process parameters optimization for friction stir welding of RDE-40 aluminium alloy using Taguchi technique

    Institute of Scientific and Technical Information of China (English)

    A.K.LAKSHMINARAYANAN; V.BALASUBRAMANIAN

    2008-01-01

    Taguchi approach was applied to determine the most influential control factors which will yield better tensile strength of the joints of friction stir welded RDE-40 aluminium alloy. In order to evaluate the effect of process parameters such as tool rotational speed, traverse speed and axial force on tensile strength of friction stir welded RDE-40 aluminium alloy, Taguchi parametric design and optimization approach was used. Through the Taguchi parametric design approach, the optimum levels of process parameters were determined. The results indicate that the rotational speed, welding speed and axial force are the significant parameters in deciding the tensile strength of the joint. The predicted optimal value of tensile strength of friction stir welded RDE-40 aluminium alloy is 303 MPa. The results were confirmed by further experiments.

  20. Aldose-ketose interconversion in pyridine in the presence of aluminium oxide.

    Science.gov (United States)

    Ekeberg, Dag; Morgenlie, Svein; Stenstrøm, Yngve

    2007-10-15

    The reaction rate of the Lobry de Bruyn-Alberda van Ekenstein transformation of aldoses to ketoses in boiling pyridine was strongly increased by the addition of aluminium oxide. In addition to aldose-ketose transformation, 2-epimers of the starting aldoses and 3-epimers of the primarily produced ketoses were formed to some extent, as reported also when these reactions are carried out without aluminium oxide. The relative amounts of the primary ketose and the starting aldose in the reaction mixtures may be explained on the basis of their stability, predicted from reported free energy calculations. Isomerisation of ketoses to aldoses was much slower than the reverse reaction. The relative free energies are also in these cases important, the very stable xylo-2-hexulose gave only 7% and 6% of the aldoses gulose and idose, respectively, after boiling for 7h in pyridine in the presence of aluminium oxide.

  1. Surface Chemistry of Aluminium Alloy Slid against Steel Lubricated by Organic Friction Modifier in Hydrocarbon Oil

    Directory of Open Access Journals (Sweden)

    Ichiro Minami

    2012-01-01

    Full Text Available The lubrication mechanism of aluminium alloy slid against steel was investigated from the standpoint of surface chemistry. Low friction and low wear were observed using glycerol mono-olate in a hydrocarbon as lubricant. Increase in the silicon content in the aluminium alloy during rubbing was observed by surface analyses using (1 Auger electron spectroscopy, (2 scanning electron microscopy along with energy dispersive X-ray spectroscopy, and (3 X-ray photoelectron spectroscopy. Mild removal of the passive state (aluminium oxide from the uppermost surface by the additive during the running-in process was proposed as the lubrication mechanism. The importance of additive chemistry that improves the running-in process was pointed out.

  2. BEHAVIOUR OF COPPER AND ALUMINIUM ELECTRODES ON EDM OF EN-8 ALLOY STEEL

    Directory of Open Access Journals (Sweden)

    DHANANJAY PRADHAN

    2011-07-01

    Full Text Available Electrical discharge machining (EDM has been recognized as an efficient production method for precision machining of electrically conducting hardened materials. Copper and aluminium are used as electrode materials in this process with Kerosene oil as the dielectric medium. In this work, the behavior of copper and aluminium electrodes on electric discharge machining of EN-8 alloy steel had been studied. Keeping all other machining parameters same, the hardened work material was machined with the two electrodes at different values of peak current, pulse-on time & duty factor according to 23 full factorial design. It has been found that copper shows better results than aluminium in term of surface finish (μm in same dielectric media. Therefore, copper is recommended as a good electrode material.

  3. Recycling of AlMgSi1 aluminium chips by cold compression

    Directory of Open Access Journals (Sweden)

    T. Pepelnjak

    2012-10-01

    Full Text Available Current work elaborates possibilities for direct conversion of AlMgSi1 aluminium chips into solid billets by solid state recycling. Milling chips from an aluminium alloy were cold compressed in a closed cylindrical die by means of a 2,5 MN hydraulic press. Due to low initial relative density of the chips, several pre-compressions were needed. In order to establish the infl uence of chip geometry on the final density of billets different types of chips were cut by using various milling regimes. The infl uence of a compression regime due to various chip types were followed by load–stroke diagrams. Up to 97 % of density measured at extruded aluminium was attained for one type of chips. Results show that the shapes of the chips and their size (especially thickness have a considerable infl uence on the final integrity of billets.

  4. Comparative environmental and economic assessment of production, use and recycling of aluminium cans: Bologna vs Copenhagen

    DEFF Research Database (Denmark)

    Princigallo, Raffaele; Visini, Davide; Bonoli, Alessandra;

    2016-01-01

    in the integrated LCA -LCC analysis. The comparative analysis of aluminium cans production, use, collection and recycling in the two systems showed that the best option from an environmental point of view is also leading to higher costs and trade - offs need to be considered in the decision making process.......Circularity strategies need to be assessed both in terms of environmental and economic impacts, by performing full chain analysis, including the perspectives of producers, users and waste management operators. This study considered two different aluminium beverage can systems: Bologna...... and Copenhagen. We performed a combined Life Cycle Assessment (LCA) and Life Cycle Costing (LCC) analysis of the purchasing, production and wa ste management of beer aluminium cans, with the aim to compare the environmental and economic performances of the two systems and to identify potential misalignment...

  5. In situ nanoindentation study on plasticity and work hardening in aluminium with incoherent twin boundaries.

    Science.gov (United States)

    Bufford, D; Liu, Y; Wang, J; Wang, H; Zhang, X

    2014-09-10

    Nanotwinned metals have been the focus of intense research recently, as twin boundaries may greatly enhance mechanical strength, while maintaining good ductility, electrical conductivity and thermal stability. Most prior studies have focused on low stacking-fault energy nanotwinned metals with coherent twin boundaries. In contrast, the plasticity of twinned high stacking-fault energy metals, such as aluminium with incoherent twin boundaries, has not been investigated. Here we report high work hardening capacity and plasticity in highly twinned aluminium containing abundant Σ3{112} incoherent twin boundaries based on in situ nanoindentation studies in a transmission electron microscope and corresponding molecular dynamics simulations. The simulations also reveal drastic differences in deformation mechanisms between nanotwinned copper and twinned aluminium ascribed to stacking-fault energy controlled dislocation-incoherent twin boundary interactions. This study provides new insight into incoherent twin boundary-dominated plasticity in high stacking-fault energy twinned metals.

  6. Thermoluminescent response of aluminium oxide thin films subject to gamma irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Arrieta, A.; Escobar A, L.; Camps, E.; Villagran, E.; Gonzalez, P.R

    2006-07-01

    The thermoluminescent (TL) properties of amorphous aluminium oxide thin films (thicknesses as low as 0.3 {mu}m) subjected to gamma (Co-60) irradiation are reported. Aluminium oxide thin films were prepared by laser ablation from an Al{sub 2}O{sub 3} target using a Nd: YAG laser with emission at the fundamental line. The films were exposed to gamma radiation (Co-60) in order to study their TL response. Thermoluminescence glow curves exhibited two peaks at 110 and 176 C. The high temperature peak shows good stability and 30% fading in the first 5 days after irradiation. A linear relationship between absorbed dose and the thermoluminescent response for doses span from 150 mGy to 100 Gy was observed. These results suggest that aluminium oxide thin films are suitable for detection and monitoring of gamma radiation. (Author)

  7. Steam assisted oxide growth on aluminium alloys using oxidative chemistries: Part I Microstructural investigation

    Science.gov (United States)

    Din, Rameez Ud; Piotrowska, Kamila; Gudla, Visweswara Chakravarthy; Jellesen, Morten Stendahl; Ambat, Rajan

    2015-11-01

    The surface treatment of aluminium alloys under steam containing KMnO4 and HNO3 resulted in the formation of an oxide layer having a thickness of up to 825 nm. The use of KMnO4 and HNO3 in the steam resulted in incorporation of the respective chemical species into the oxide layer. Steam treatment with solution containing HNO3 caused dissolution of Cu and Si from the intermetallic particles in the aluminium substrate. The growth rate of oxide layer was observed to be a function of MnO4- and NO3- ions present in the aqueous solution. The NO3- ions exhibit higher affinity towards the intermetallic particles resulting in poor coverage by the steam generated oxide layer compared to the coating formed using MnO4- ions. Further, increase in the concentration of NO3- ions in the solution retards precipitation of the steam generated aluminium hydroxide layer.

  8. Void growth in high strength aluminium alloy single crystals: a CPFEM based study

    Science.gov (United States)

    Asim, Umair; Siddiq, M. Amir; Demiral, Murat

    2017-04-01

    High strength aluminium alloys that are produced through forming and joining processes are widely used in aerospace components. The ductile failure in these metals occurs due to the evolution and accumulation of microscopic defects, such as microvoids and shear bands. The present work investigates the underlying physical mechanisms during ductile failure by performing a rigorous, fully-validated, three-dimensional crystal plasticity, finite element study with aluminium alloy single crystals. Representative volume element (RVE) based simulations of single crystalline aluminium alloys (AA-5xxx) with different void geometries and orientations have been performed. Both local and nonlocal crystal plasticity constitutive models have been implemented in a finite element framework and are used to seek new insights into the interrelationships among void growth, initial porosity, initial void size, plastic anisotropy, and local/nonlocal size effects.

  9. Interface and microstructure characteristics of SiCp/2024 aluminium alloy composite

    Institute of Scientific and Technical Information of China (English)

    罗守靖; 姜巨福; 王迎; 藤东东; 祖丽君

    2003-01-01

    Electron microscope examination of the microstructure, interface and fracture surface of SiC particulatereinforced 2024 aluminium alloy composites produced by powder mixing and semi-solid extrusion process was pres-ented. The microstructure of SiCp/2024 composites fabricated by the present method is characterized by uniformlydistributed SiC particulates in well-densified matrix. Conventional transmission electron microscopy(TEM) revealsthe interface between the SiC particulates and the aluminium matrix. It is shown that this interface provides verystrong bonding which is further evidenced by the fractographic results, and that there is no apparent chemical reac-tion. Examination of the fracture surface indicates that the bonding strength between the SiC particulates and the a-luminium alloy matrix is stronger than that of the matrix. The dimples and tearing edges on the fracture surface ofcomposites are obviously observed.

  10. Development of a semi-solid metal processing technique for aluminium casting applications

    Directory of Open Access Journals (Sweden)

    Sangop Thanabumrungkul

    2008-03-01

    Full Text Available A semi-solid metal processing technique has been invented and is being developed for aluminium casting applications in Thailand. The technique uses fine gas bubbles to create convection necessary for modifying grain structure. Semi-solid metal processing of three aluminium alloys, A356, Al-4.4%Cu, and ADC12, was investigated. Results show that the novel technique successfully modified A356 and Al-4.4%Cu to become semi-solid slurry with solid fractions up to about 50%. Current developments show a feasibility of applying this technique with gravity casting and the capability to prepare semisolid slurry up to 2 kg of aluminium alloys for industrial production.

  11. Properties of the Aluminium Alloy EN AC-51100 after Laser Surface Treatment

    Directory of Open Access Journals (Sweden)

    Tański T.

    2016-03-01

    Full Text Available In this paper, the influence of a laser surface treatment on the structure and properties of aluminium alloy has been determined. The aim of this work was to improve the tribological properties of the surface layer of the EN AC-51100 aluminium alloy by simultaneously melting and feeding silicon carbide particles into the molten pool. The silicon carbide powder was introduced into the liquid metal using a gravity feeder within a constant feed rate of 1 g/min. A high power diode laser (HPDL was used for remelting. Laser beam energies used in experiments were 1.8 kW, 2.0 kW and 2.2 kW, combined with the constant velocity of 50 mm/min. As a result of the laser treatment on the aluminium alloy, a composite layer with greater hardness and wear resistance compared to the based material was obtained.

  12. Experimental study of impact energy absorption in aluminium square tubes with thermal triggers

    Directory of Open Access Journals (Sweden)

    Nuno Peixinho

    2012-04-01

    Full Text Available This study presents an approach for the improvement of crashworthiness properties of aluminium tubular structures using initiators introduced through localized heating. The main objective of this approach is to improve the ability to absorb impact energy in a progressive and controlled manner by a local modification of material properties. Through a localized heating in areas previously chosen for initiation, associated with the softening of the aluminium alloy the deformation can be introduced precisely, forcing the tubular structure to deform in a mode of high energy absorption and reducing the maximum load in a controlled manner. This study presents the properties for an aluminium alloy 6061-T5 modified by thermal treatment by the use of a laser beam. Experimental results are presented of quasi-static and impact tests of tubular structures using the proposed approach. This concept appears as possible and effective in the experimental work presented.

  13. Investigation of The Amount of Energy Absorption of Aluminium Tube : Inversion and Concertina Collapse Mode

    Directory of Open Access Journals (Sweden)

    Mohd Suhairil Meon

    2012-01-01

    Full Text Available The objective of this study is to investigate the effect of variation of the tube length and the crosshead velocity on the amount of energy absorption of aluminium tubes (Al 6061 towards the inversion and concertina collapsed mode. The tests were performed on the Aluminium tubes using compression test apparatus according to ASTM E8 standard procedures. Two parameters that are included in the experiment were the crosshead velocity and tube length. The collected experimental data were organized and analysis of energy absorption was performed. Comparison was made to the values of energy absorption obtained from the experiments, and it was found that the energy absorbed by the Aluminium tube under inversion mode was increased by increasing the tube length as well as crosshead velocity. Results for the concertina type mode differ with inversion mode.

  14. A role for the body burden of aluminium in vaccine-associated macrophagic myofasciitis and chronic fatigue syndrome.

    Science.gov (United States)

    Exley, Christopher; Swarbrick, Louise; Gherardi, Rhomain K; Authier, Francois-Jérôme

    2009-02-01

    Macrophagic myofasciitis and chronic fatigue syndrome are severely disabling conditions which may be caused by adverse reactions to aluminium-containing adjuvants in vaccines. While a little is known of disease aetiology both conditions are characterised by an aberrant immune response, have a number of prominent symptoms in common and are coincident in many individuals. Herein, we have described a case of vaccine-associated chronic fatigue syndrome and macrophagic myofasciitis in an individual demonstrating aluminium overload. This is the first report linking the latter with either of these two conditions and the possibility is considered that the coincident aluminium overload contributed significantly to the severity of these conditions in this individual. This case has highlighted potential dangers associated with aluminium-containing adjuvants and we have elucidated a possible mechanism whereby vaccination involving aluminium-containing adjuvants could trigger the cascade of immunological events which are associated with autoimmune conditions including chronic fatigue syndrome and macrophagic myofasciitis.

  15. Le soudage de l'aluminium et de ses alliages

    CERN Document Server

    Favre, G

    2005-01-01

    Le soudage de l'aluminium requiert un savoir-faire spécifique pour éviter la formation, dans la soudure, de défauts rédhibitoires tels que les manques de fusion ou soufflures. Ces défauts ont pour causes principales la présence d’une couche d'alumine, une diffusivité thermique élevée et une solubilité très faible de l’hydrogène dans le métal à l’état solide. Les règles de l’art à appliquer pour la préparation des assemblages et pour le choix des paramètres de soudage sont rappelées. Les divers procédés de soudage mis en Å"uvre par la section TS-MME-AS (faisceau d’électrons, laser, TIG, MIG) sont ensuite exposés à travers quelques applications récentes liées au LHC et à ses expériences. Enfin, une nouvelle technologie, le Friction Stir Welding (FSW), est présentée. Ce procédé de friction malaxage se déroule à l’état pâteux sans fusion. Il permet de réaliser des assemb...

  16. Aluminium Uptake and Accumulation in the Hyperaccumulator Camellia Oleifera Abel

    Institute of Scientific and Technical Information of China (English)

    ZENG Qi-Long; CHEN Rong-Fu; ZHAO Xue-Qiang; WANG Huo-Yan; SHEN Ren-Fang

    2011-01-01

    Oiltea camellia (Camellia oleifera Abel.), an aluminium (Al) hyperaccumulator, grows well on acid soils in tropical or subtropical areas. In this study, the growth of oiltea camellia in response to Al application and the characteristics of Al uptake and accumulation were investigated using laboratory and field experiments. The growth of oiltea camellia seedlings in the nutrient solution tended to be stimulated by addition of Al. Results of the field experiment showed that oiltea camellia accumulated 11000 mg kg-1 Al in leaves within 10 months, and the average rate of A1 accumulation in new leaves was about 1 100 mg kg-1 month-1; however, the monthly rate varied and was highest in spring and autumn. The results of the laboratory experiment on Al uptake by oiltea camellia seedlings in CaCl2 solutions with various forms of Al showed that large amounts of Al supplied as Al3+ and Al complexes Al-malate (1:1) and Al-F (1:1) were influxed into oiltea camellia roots, whereas Al supplied as Al-citrate (1:1), Al-F (1:6), Al-oxalate (1:3), and Al-oxalate (1:1) complexes exhibited low affinity to oiltea camellia roots. The kinetics of Als+ cumulative uptake in excised roots and intact plants showed a biphasic pattern, with an initial rapid phase followed by a slow phase. The Al cumulative uptake was unaffected by low temperature,which indicated that Al uptake in oiltea camellia was a passive process. The efficient influx of Al into the roots and the high transport rate in specific seasons were presumed to account for the plentiful Al accumulation in leaves of oiltea camellia.

  17. Soil aluminium uptake and accumulation by Paspalum notatum.

    Science.gov (United States)

    Huang, Juan; Xia, Hanping; Li, Zhi'an; Xiong, Yanmei; Kong, Guohui; Huang, Juan

    2009-10-01

    Paspalum notatum Flugge has been widely utilized for the purpose of ecological restoration of degraded land in the tropics and subtropics, where soil active aluminium (Al) is usually high as a result of acidification. Pot experiments were conducted to determine Al toxicity on P. notatum and to compare its potential to remove Al with another three plant species, Vetiveria zizanioides, Tristania conferta and Schima wallichii. In the Al addition experiment, the biomass of P. notatum and Al accumulation significantly decreased as the added Al concentration increased, but Al concentration in the plant markedly increased. A parallel experiment was conducted with the above four species, grown in lateritic soil and in oil shale waste containing high concentration of active Al. The biomasses of all four species were reduced obviously in the waste compared to in the soil. The effects of substrate on Al concentration, accumulation and translocation efficiency differed among species, and plants had significantly higher Al accumulation factors when grown in the soil than in the waste. Most of the Al taken up by P. notatum was transferred to above-ground parts; as a result, Al concentration in stems and leaves became quite high, over 1000 or even 3000 mg kg(-1); whereas for the other three species, Al concentration in shoots was much lower than in roots. Paspalum notatum was therefore much higher than the other three species with regard to Al translocation efficiency and therefore P. notatum may be regarded as both an effective Al hyper-accumulator and a potential Al hyper-remover.

  18. Efficacy of chelation therapy to remove aluminium intoxication.

    Science.gov (United States)

    Fulgenzi, Alessandro; De Giuseppe, Rachele; Bamonti, Fabrizia; Vietti, Daniele; Ferrero, Maria Elena

    2015-11-01

    There is a distinct correlation between aluminium (Al) intoxication and neurodegenerative diseases (ND). We demonstrated how patients affected by ND showing Al intoxication benefit from short-term treatment with calcium disodium ethylene diamine tetraacetic acid (EDTA) (chelation therapy). Such therapy further improved through daily treatment with the antioxidant Cellfood. In the present study we examined the efficacy of long-term treatment, using both EDTA and Cellfood. Slow intravenous treatment with the chelating agent EDTA (2 g/10 mL diluted in 500 mL physiological saline administered in 2 h) (chelation test) removed Al, which was detected (using inductively coupled plasma mass spectrometry) in urine samples collected from patients over 12 h. Patients that revealed Al intoxication (expressed in μg per g creatinine) underwent EDTA chelation therapy once a week for ten weeks, then once every two weeks for a further six or twelve months. At the end of treatment (a total of 22 or 34 chelation therapies, respectively), associated with daily assumption of Cellfood, Al levels in the urine samples were analysed. In addition, the following blood parameters were determined: homocysteine, vitamin B12, and folate, as well as the oxidative status e.g. reactive oxygen species (ROS), total antioxidant capacity (TAC), oxidized LDL (oxLDL), and glutathione. Our results showed that Al intoxication reduced significantly following EDTA and Cellfood treatment, and clinical symptoms improved. After treatment, ROS, oxLDL, and homocysteine decreased significantly, whereas vitamin B12, folate and TAC improved significantly. In conclusion, our data show the efficacy of chelation therapy associated with Cellfood in subjects affected by Al intoxication who have developed ND.

  19. A molecular mechanism of aluminium-induced Alzheimer's disease?

    Science.gov (United States)

    Exley, C

    1999-08-30

    An abundance of research has continued to link aluminium (Al) with Alzheimer's disease (AD) (Strong et al., J. Toxicol. Environ. Health 48 (1996) 599; Savory et al., J. Toxicol. Environ. Health 48 (1996) 615). Animals loaded with Al develop both symptoms and brain lesions that are similar to those found in AD. However, these animal models of Al intoxication are not representative of human exposure to Al. They have not addressed the significance of a truly chronic exposure to Al. If Al is a cause of AD it is effective at the level of our everyday exposure to the metal and AD will be one possible outcome of the life-long presence of a low, though burgeoning, brain Al burden. Individual susceptibility to AD will be as much to do with differences in brain physiology as with changes in our everyday exposure to the metal. There will be a chemical response and indeed biochemical/physiological response in the brain to Al. The question is whether brain Al homeostasis could impact upon brain function. In reviewing the recent literature covering the neurotoxicity of Al and, in particular, of the known and probable mechanisms involved in brain Al homeostasis I have identified a mechanism through which a truly chronic exposure to Al would bring about subtle and persistent changes in neurotransmission which, in time, could instigate the cascade of events known collectively as AD. This mechanism involves the potentiation of the activities of neurotransmitters by the action of Al-ATP at adenosine 5'-triphosphate (ATP) receptors in the brain.

  20. Mechanical and frictional behaviour of nano-porous anodised aluminium

    Energy Technology Data Exchange (ETDEWEB)

    Tsyntsaru, N., E-mail: tintaru@phys.asm.md [Institute of Applied Physics of ASM, 5 Academy str., Chisinau, MD 2028 (Moldova, Republic of); Kavas, B., E-mail: bkavas@ford.com.tr [Istanbul Technical University, Department of Metallurgical and Materials Engineering, 34469 Maslak (Turkey); Ford Otomotiv San A.S., Istanbul (Turkey); Sort, J., E-mail: jordi.sort@uab.cat [Institució Catalana de Recerca i Estudis Avançats (ICREA) and Departament de Física, Universitat Autònoma de Barcelona, E-08193 Bellaterra (Spain); Urgen, M., E-mail: urgen@itu.edu.tr [Istanbul Technical University, Department of Metallurgical and Materials Engineering, 34469 Maslak (Turkey); Celis, J.-P., E-mail: jean-pierre.celis@mtm.kuleuven.be [KU Leuven, Dept. MTM, Kasteelpark Arenberg 44, B-3001 (Belgium)

    2014-12-15

    The porous structure of anodic aluminium oxide (AAO) can be used in versatile applications such as a lubricant reservoir in self-lubricating systems. Such systems are subjected to biaxial loading, which can induce crack formation and propagation, ultimately leading to catastrophic mechanical failure. In this study, the mechanical and tribological behaviour of AAO, prepared from two different types of electrolytes (sulphuric and oxalic acids), are studied in detail. The electrolytic conditions are adjusted to render highly tuneable average pore diameters (between 16 and 75 nm), with porosity levels ranging from 9% to 65%. Well-ordered porous AAO are produced by two-step anodization at rather low temperatures. Mechanical properties, mainly hardness and Young's modulus, are investigated using nanoindentation. Both the porosity degree and the composition of the electrolytic baths used to prepare the AAO have an influence on the mechanical properties. Ball-on-flat configuration was used to estimate the tribological behaviour under dry conditions. No major cracks were observed by scanning electron microscopy, neither after indentation or fretting tests. In the running-in period of tribology experiments the pores were filled with debris. This was followed by the formation of a highly adherent tribolayer – a third body consisting of fine worn particles originated from both the sample and the counterbody. Pore diameter and porosity percentage are found to strongly affect hardness and Young's modulus, but they do not have a major effect on the frictional behaviour. - Highlights: • Well-ordered porous AAO with pore diameters between 16 and 75 nm were produced. • Porosity and composition of electrolytic baths influence the mechanical properties. • Ball-on-flat configuration was used in tribological testing under dry conditions. • Adherent tribolayer consisting of fine worn particles prevents AAO from cracking. • Testing parameters are moreover essential

  1. Fluence dependent electrical conductivity in aluminium thin films grown by infrared pulsed laser deposition

    Energy Technology Data Exchange (ETDEWEB)

    Rebollar, Esther, E-mail: e.rebollar@csic.es [Instituto de Química Física Rocasolano, IQFR-CSIC, Serrano 19, 28006 Madrid (Spain); Martínez-Tong, Daniel E. [Instituto de Estructura de la Materia, IEM-CSIC, Serrano 121, 28006 Madrid (Spain); Sanz, Mikel; Oujja, Mohamed; Marco, José F. [Instituto de Química Física Rocasolano, IQFR-CSIC, Serrano 19, 28006 Madrid (Spain); Ezquerra, Tiberio A. [Instituto de Estructura de la Materia, IEM-CSIC, Serrano 121, 28006 Madrid (Spain); Castillejo, Marta [Instituto de Química Física Rocasolano, IQFR-CSIC, Serrano 19, 28006 Madrid (Spain)

    2016-11-30

    Highlights: • IR pulsed laser ablation of aluminium gives rise to smooth layers of several tens of nanometers. • Irradiation at fluences around 2.7 J/cm{sup 2} and above 7 J/cm{sup 2} resulted in deposition of amorphous aluminium oxide films and metallic aluminium films respectively. • Highly ionized species are more abundant in the ablation plumes generated at higher fluences. • It is possible to control by PLD the metal or dielectric character of the films. - Abstract: We studied the effect of laser fluence on the morphology, composition, structure and electric conductivity of deposits generated by pulsed laser ablation of a metallic aluminium target in vacuum using a Q-switched Nd:YAG laser (1064 nm, 15 ns). Upon irradiation for one hour at a repetition rate of 10 Hz, a smooth layer of several tens of nanometres, as revealed by atomic force microscopy (AFM) was deposited on glass. Surface chemical composition was determined by X-ray photoelectron spectroscopy, and to study the conductivity of deposits both I–V curves and conductive-AFM measurements were performed. Irradiation at fluences around 2.7 J/cm{sup 2} resulted in deposition of amorphous aluminium oxide films. Differently, at higher fluences above 7 J/cm{sup 2}, the films are constituted by metallic aluminium. Optical emission spectroscopy revealed that highly ionized species are more abundant in the ablation plumes generated at higher fluences. The results demonstrate the possibility to control by PLD the metal or dielectric character of the films.

  2. Protective role of Cynodon dactylon in ameliorating the aluminium-induced neurotoxicity in rat brain regions.

    Science.gov (United States)

    Sumathi, Thangarajan; Shobana, Chandrasekar; Kumari, Balasubramanian Rathina; Nandhini, Devarajulu Nisha

    2011-12-01

    Cynodon dactylon (Poaceae) is a creeping grass used as a traditional ayurvedic medicine in India. Aluminium-induced neurotoxicity is well known and different salts of aluminium have been reported to accelerate damage to biomolecules like lipids, proteins and nucleic acids. The objective of the present study was to investigate whether the aqueous extract of C. dactylon (AECD) could potentially prevent aluminium-induced neurotoxicity in the cerebral cortex, hippocampus and cerebellum of the rat brain. Male albino rats were administered with AlCl(3) at a dose of 4.2 mg/kg/day i.p. for 4 weeks. Experimental rats were given C. dactylon extract in two different doses of 300 mg and 750 mg/keg/day orally 1 h prior to the AlCl(3) administration for 4 weeks. At the end of the experiments, antioxidant status and activities of ATPases in cerebral cortex, hippocampus and cerebellum of rat brain were measured. Aluminium administration significantly decreased the level of GSH and the activities of SOD, GPx, GST, Na(+)/K(+) ATPase, and Mg(2+) ATPase and increased the level of lipid peroxidation (LPO) in all the brain regions when compared with control rats. Pre-treatment with AECD at a dose of 750 mg/kg b.w increased the antioxidant status and activities of membrane-bound enzymes (Na(+)/K(+) ATPase and Mg(2+) ATPase) and also decreased the level of LPO significantly, when compared with aluminium-induced rats. The results of this study indicated that AECD has potential to protect the various brain regions from aluminium-induced neurotoxicity.

  3. Aluminium induced oxidative stress results in decreased mitochondrial biogenesis via modulation of PGC-1α expression.

    Science.gov (United States)

    Sharma, Deep Raj; Sunkaria, Aditya; Wani, Willayat Yousuf; Sharma, Reeta Kumari; Kandimalla, Ramesh J L; Bal, Amanjit; Gill, Kiran Dip

    2013-12-01

    The present investigation was carried out to elucidate a possible molecular mechanism related to the effects of aluminium-induced oxidative stress on various mitochondrial respiratory complex subunits with special emphasis on the role of Peroxisome proliferator activated receptor gamma co-activator 1α (PGC-1α) and its downstream targets i.e. Nuclear respiratory factor-1(NRF-1), Nuclear respiratory factor-2(NRF-2) and Mitochondrial transcription factor A (Tfam) in mitochondrial biogenesis. Aluminium lactate (10mg/kgb.wt./day) was administered intragastrically to rats for 12 weeks. After 12 weeks of exposure, we found an increase in ROS levels, mitochondrial DNA oxidation and decrease in citrate synthase activity in the Hippocampus (HC) and Corpus striatum (CS) regions of rat brain. On the other hand, there was a decrease in the mRNA levels of the mitochondrial encoded subunits-NADH dehydrogenase (ND) subunits i.e. ND1, ND2, ND3, Cytochrome b (Cytb), Cytochrome oxidase (COX) subunits i.e. COX1, COX3, ATP synthase (ATPase) subunit 6 along with reduced expression of nuclear encoded subunits COX4, COX5A, COX5B of Electron transport chain (ETC). Besides, a decrease in mitochondrial DNA copy number and mitochondrial content in both regions of rat brain was observed. The PGC-1α was down-regulated in aluminium treated rats along with NRF-1, NRF-2 and Tfam, which act downstream from PGC-1α in aluminium treated rats. Electron microscopy results revealed a significant increase in the mitochondrial swelling, loss of cristae, chromatin condensation and decreases in mitochondrial number in case of aluminium treated rats as compared to control. So, PGC-1α seems to be a potent target for aluminium neurotoxicity, which makes it an almost ideal target to control or limit the damage that has been associated with the defective mitochondrial function seen in neurodegenerative diseases.

  4. The Influence of Tool Geometry towards Cutting Performance in Machining Aluminium 7075

    Directory of Open Access Journals (Sweden)

    Muhammad Syafik Jumali

    2017-01-01

    Full Text Available Aerospace industries often use Computer Numerical Control (CNC machining in manufacturing aerospace parts. Aluminium 7075 is the most common material used as aircraft components. This research aims to produce end mill with optimum geometry in terms of the helix angle, primary radial relief angle and secondary relief angle. End mills with different geometry parameters are tested on Aluminium 7075 and data on surface roughness and tool wear were collected. The results were then analysed to determine which parameters brought the optimum result with regards to surface roughness and tool wear.

  5. Band gap and conductivity variations of ZnO thin films by doping with Aluminium

    Science.gov (United States)

    Vattappalam, Sunil C.; Thomas, Deepu; T, Raju Mathew; Augustine, Simon; Mathew, Sunny

    2015-02-01

    Zinc Oxide thin films were prepared by Successive Ionic layer adsorption and reaction technique(SILAR). Aluminium was doped for different doping concentrations from 3 at.% to 12 at.% in steps of 3 at.%. Conductivity of the samples were taken at different temperatures. UV Spectrograph of the samples were taken and the band gap of each sample was found from the data. It was observed that as the doping concentration of Aluminium increases, the band gap of the samples decreases and concequently conductivity of the samples increases.

  6. The Aggregates in LB Films of Schiff base Aluminium (III) Complex

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The surface pressure-area (p -A) isotherm of Schiff base aluminium (III), tris (2-hydroxy-5-nitro-N-dodecyl-benzylideneaminato) aluminium (III) (denoted as Al(TA12)3), on pure water subphase was investigated. The molecular area, 0.48 nm2 , is one-third of expected value that indicated the aggregation took place. The Langmuir-Blodgett (LB) films of Al(TA12)3 was transferred and characterized. The AFM image confirmed the formation of aggregates.

  7. Pitting corrosion of A357 aluminium alloy obtained by semisolid processing

    Energy Technology Data Exchange (ETDEWEB)

    Bastidas, J.M.; Polo, J.L.; Torres, C.L. [National Centre for Metallurgical Research (CSIC), Madrid (Spain); Forn, A.; Baile, M.T. [Polytechnic Univ. of Catalonia, Vilanova i la Geltru (Spain)

    2001-09-01

    This paper studies the pitting corrosion of a structural component of A357 aluminium alloy obtained by a semisolid metal forming process. The mechanical properties of the A357 alloy were improved by applying standard heat treatments T5 and T6. Impedance measurements were conducted at the rest potential and polarisation curves were plotted using a 3% NaCl test solution. After polarisation experiments the specimens were analysed by scanning electron microscopy. The corrosion process is favoured through the eutectic regions. The results show that T6 heat treatment improved the corrosion resistance of the A357 aluminium alloy. (orig.)

  8. Severe myocardial depression in a patient with aluminium phosphide poisoning: A clinical, electrocardiographical and histopathological correlation

    Directory of Open Access Journals (Sweden)

    Shah Viral

    2009-01-01

    Full Text Available Aluminium phosphide poisoning is very common in India. It is one of the most fatal poisons. The clinical spectrum of poisoning varies depending upon the dosage and duration of consumption. The main effect of the poison is due to the release of phosphine which inhibits cytochrome oxidase and thereby hampers cellular oxygen utilization. Almost any organ can be affected by aluminium phosphide poisoning. We report a case where the heart was the predominantly affected organ. We describe the clinical symptoms and signs and their correlation with electrocardiographic and histopathological examinations.

  9. Bioactive type glass-ceramics within incorporated aluminium; Vitroceramicos del tipo bioactivo con aluminio incorporado

    Energy Technology Data Exchange (ETDEWEB)

    Volzone, C.; Stabile, F.M.; Ortiga, J., E-mail: volzcris@netverk.com.ar [Centro de Tecnologia de Recursos Minerales y Ceramica (CETMIC), Buenos Aires (Argentina)

    2012-07-01

    Bioactive glass-ceramics are used as biomaterials for the reparation of bone tissue. They are prepared, generally, by bioglass of specific composition for each particular use. The aluminium addition in the formulation at very small quantities influences on the structural properties. Two glass-ceramics obtained by P{sub 2}O{sub 5}-Na{sub 2}O-CaO-SiO{sub 2} formulation within aluminium (0.5 % in Al{sub 2}O{sub 3} base) added through a reactive alumina and purified feldspar were analyzed. The results showed structural differences between both glass-ceramics. (author)

  10. Development of a semi-solid metal processing technique for aluminium casting applications

    OpenAIRE

    Sangop Thanabumrungkul; Jessada Wannasin

    2008-01-01

    A semi-solid metal processing technique has been invented and is being developed for aluminium casting applications in Thailand. The technique uses fine gas bubbles to create convection necessary for modifying grain structure. Semi-solid metal processing of three aluminium alloys, A356, Al-4.4%Cu, and ADC12, was investigated. Results show that the novel technique successfully modified A356 and Al-4.4%Cu to become semi-solid slurry with solid fractions up to about 50%. Current developments sho...

  11. Aluminium speciation and phytotoxicity in minesoils of a lignite mine in NW Spain

    Energy Technology Data Exchange (ETDEWEB)

    Monterroso, C.; Alvarez, E.; Marcos, M.L.F.; Macias, F. [University of Santiago, Lugo (Spain)

    1998-01-01

    The soil solution composition and the solution aluminium speciation were used to evaluate Al phytotoxicity risks in the reclaimed soils of the lignite mine in As Pontes, NW Spain. The vegetation decline in some soils containing sulphides appears to be related to the high acidity and salinity rising from sulphide oxidation rather than to the high aluminium concentrations. The high concentrations of SO{sub 4}{sup 2-} and base cations, particularly Ca{sup 2+} and Mg{sup 2+}, play a detoxifying role in these environments.

  12. Gating System Design for Casting thin Aluminium Alloy (Al-Si) Plates

    OpenAIRE

    Victor ANJO; Reyaz KHAN

    2013-01-01

    The main problems caused by improper gating are entrained aluminium oxide films, cuts and washes, low casting yield and entrapped gas. This study describes the design of a gating system to produce thin Aluminium cast alloy plates of different sizes and thicknesses of 4mm, 6mm, 8mm, and 10mm using the non-pressurized gating with ratio of 1:4:4 and green sand moulding technique. The gating design was based on the laws of fluid mechanics and empirical rules of gating for non ferrous metals. The ...

  13. Energy response of an aluminium oxide detector in kilovoltage and megavoltage photon beams: an EGSnrc Monte Carlo simulation study.

    Science.gov (United States)

    Agyingi, Ephraim O; Mobit, Paul N; Sandison, George A

    2006-01-01

    A Monte Carlo study of the energy response of an aluminium oxide (Al(2)O(3)) detector in kilovoltage and megavoltage photon beams relative to (60)Co gamma rays has been performed using EGSnrc Monte Carlo simulations. The sensitive volume of the Al(2)O(3) detector was simulated as a disc of diameter 2.85 mm and thickness 1 mm. The phantom material was water and the irradiation depth chosen was 2.0 cm in kilovoltage photon beams and 5.0 cm in megavoltage photon beams. The results show that the energy response of the Al(2)O(3) detector is constant within 3% for photon beam energies in the energy range of (60)Co gamma rays to 25 MV X rays. However, the Al(2)O(3) detector shows an enhanced energy response for kilovoltage photon beams, which in the case of 50 kV X rays is 3.2 times higher than that for (60)Co gamma rays. There is essentially no difference in the energy responses of LiF and Al(2)O(3) detectors irradiated in megavoltage photon beams when these Al(2)O(3) results are compared with literature data for LiF thermoluminescence detectors. However, the Al(2)O(3) detector has a much higher enhanced response compared with LiF detectors in kilovoltage X-ray beams, more than twice as much for the case of 50 kV X rays.

  14. Comparative study of highly dense aluminium- and gallium-doped zinc oxide transparent conducting sol–gel thin films

    Indian Academy of Sciences (India)

    Naji Al Dahoudi

    2014-10-01

    Transparent conducting aluminium- and gallium-doped zinc oxide (AZO and GZO) layers have been deposited by spin coating on glass substrates. The coatings have been sintered in air at 450 °C for 30 min and then post-annealed at 350 °C in a reducing atmosphere for 30 min. The electrical, optical and morphological properties of both coatings have been studied and compared. The conventional sols lead to very thin coating, typically 24 nm for a single layer of AZO and 32 nm of GZO with electrical resistivity of 0.72 and 0.35 cm, respectively. The value however, drastically decreases down to a minimum of 2.6 × 10-2 cm for AZO and 1.76 × 10-2 cm for GZO, when five multilayer coatings are made. The origin of these differences is due to the different morphology of the coatings showing different electron scattering process. The GZO sol leads to denser smoother structure (porosity of 5%) layers with an average roughness of 2.76 Å, while the AZO coating is formed by a more porous assembly (porosity of 20%) with an average roughness of 3.46 Å. Both coatings exhibit high transparency ( > 85%) in the visible spectrum range with a slight shift of the absorption energy gap.

  15. Fatigue behaviour analysis of a range of aluminium matrix composites; Analyse du comportement a la fatigue d'une gamme de composites a matrice aluminium

    Energy Technology Data Exchange (ETDEWEB)

    Couturier, L.; Lieurade, H.P.; FLavenot, J.F. [Centre Technique des Industries Mecaniques (CETIM), Dept. Materiaux, 60 - Senlis (France); Massinon, D. [Montupet SA, Dept. Materiaux, 60 - Nogent sur Oise (France); Lu, J. [Universite de Technologie de Troyes, LASMIS, 10 - Troyes (France)

    2000-07-01

    This paper provides an analysis of aluminium matrix composites (AMC) fatigue behaviour. The fatigue test results obtained in four points bending (R = 0,1) are compared in the medium and high cycles regimes (S-N curves) for five AMC and a non reinforced aluminium alloy. The discussion on the results is mainly based on the fatigue strength levels, the scatter on the results, the endurance ratio, in connection with the rate of defects which initiate crack. This discussion points out that the main sites of crack initiation are defects of elaboration (pores). In fact, manufacturing processes induce defects more or less important, leading to a large variation in the fatigue strength. An analysis of stress intensity factors estimated from the surface flaws leads to a classification of the composite materials in terms of damage tolerance approach. (authors)

  16. Root adaptations to soils with low fertility and aluminium toxicity

    Science.gov (United States)

    Rao, Idupulapati M.; Miles, John W.; Beebe, Stephen E.; Horst, Walter J.

    2016-01-01

    Background Plants depend on their root systems to acquire the water and nutrients necessary for their survival in nature, and for their yield and nutritional quality in agriculture. Root systems are complex and a variety of root phenes have been identified as contributors to adaptation to soils with low fertility and aluminium (Al) toxicity. Phenotypic characterization of root adaptations to infertile soils is enabling plant breeders to develop improved cultivars that not only yield more, but also contribute to yield stability and nutritional security in the face of climate variability. Scope In this review the adaptive responses of root systems to soils with low fertility and Al toxicity are described. After a brief introduction, the purpose and focus of the review are outlined. This is followed by a description of the adaptive responses of roots to low supply of mineral nutrients [with an emphasis on low availability of nitrogen (N) and phosphorus (P) and on toxic levels of Al]. We describe progress in developing germplasm adapted to soils with low fertility or Al toxicity using selected examples from ongoing breeding programmes on food (maize, common bean) and forage/feed (Brachiaria spp.) crops. A number of root architectural, morphological, anatomical and metabolic phenes contribute to the superior performance and yield on soils with low fertility and Al toxicity. Major advances have been made in identifying root phenes in improving adaptation to low N (maize), low P (common bean) or high Al [maize, common bean, species and hybrids of brachiariagrass, bulbous canarygrass (Phalaris aquatica) and lucerne (Medicago sativa)]. Conclusions Advanced root phenotyping tools will allow dissection of root responses into specific root phenes that will aid both conventional and molecular breeders to develop superior cultivars. These new cultivars will play a key role in sustainable intensification of crop–livestock systems, particularly in smallholder systems of the

  17. Positronium formation in helium bubbles in 600 MeV proton-irradiated aluminium

    DEFF Research Database (Denmark)

    Jensen, K. O.; Eldrup, Morten Mostgaard; Singh, Bachu Narain

    1985-01-01

    Aluminium samples containing helium bubbles produced by 600 MeV proton irradiation at 430°C were investigated by positron annihilation; both lifetime and angular correlation measurements were made. The angular correlation curves contain an unusually narrow component. This component is associated...

  18. Shanxi Huaze Aluminium & Power Co.,Ltd.Intends to Cut Production Because of Power Shortage

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    <正>Located in Shanxi Province,Huaze Aluminium & Power Co.,Ltd.is facing the challenge of power shortage in an era of rising cost in coal and power."We began to cut production as early as in late June,"an insider from the com- pany said on later July.

  19. An effective split of flow and die deformation calculations of aluminium extrusion

    NARCIS (Netherlands)

    Mooi, H.G.; Koenis, P.T.G.; Huétink, J.

    1999-01-01

    The purpose of the research project of which this paper is a result is to gain insight in design and control parameters of aluminium extrusion by FE simulations. This is done by means of a thermal FE code based on an ALE algorithm (Dieka). A short overview is given of the material models as well as

  20. Porous silicon damage enhanced phosphorus and aluminium gettering of p-type Czochralski silicon

    Energy Technology Data Exchange (ETDEWEB)

    Hassen, M. [Institut National de Recherche Scientifique et Technique, Laboratoire de Photovoltaique et des Semiconducteurs, PB 95 2050 Hammam-Lif (Tunisia); Ben Jaballah, A. [Institut National de Recherche Scientifique et Technique, Laboratoire de Photovoltaique et des Semiconducteurs, PB 95 2050 Hammam-Lif (Tunisia)]. E-mail: gadour2003@yahoo.fr; Hajji, M. [Institut National de Recherche Scientifique et Technique, Laboratoire de Photovoltaique et des Semiconducteurs, PB 95 2050 Hammam-Lif (Tunisia); Rahmouni, H. [Laboratoire de Physique des Semiconducteurs et des Composants Electroniques, Faculte des Sciences de Monastir, Rue de Kairouan, 5000 Monastir (Tunisia); Selmi, A. [Laboratoire de Physique des Semiconducteurs et des Composants Electroniques, Faculte des Sciences de Monastir, Rue de Kairouan, 5000 Monastir (Tunisia); Ezzaouia, H. [Institut National de Recherche Scientifique et Technique, Laboratoire de Photovoltaique et des Semiconducteurs, PB 95 2050 Hammam-Lif (Tunisia)

    2005-12-05

    In this work, porous silicon damage (PSD) is presented as a simple sequence for efficient external purification techniques. The method consists of using thin nanoporous p-type silicon on both sides of the silicon substrates with randomly hemispherical voids. Then, two main sample types are processed. In the first type, thin aluminium layers ({>=}1 {mu}m) are thermally evaporated followed by photo-thermal annealing treatments in N{sub 2} atmosphere at one of several temperatures ranging between 600 and 800 deg. C. In the second type, phosphorus is continually diffused in N{sub 2}/O{sub 2} ambient in a solid phase from POCl{sub 3} solution during heating at one of several temperatures ranging between 750 and 1000 deg. C for 1 h. Hall Effect and Van Der Pauw methods prove the existence of an optimum temperature in the case of phosphorus gettering at 900 deg. C yielding a Hall mobility of about 982 cm{sup 2} V{sup -1} s{sup -1}. However, in the case of aluminium gettering, there is no gettering limit in the as mentioned temperature range. Metal/Si Schottky diodes are elaborated to clarify these improvements. In this study, we demonstrate that enhanced metal solubility model cannot explain the gettering effect. The solid solubility of aluminium is higher than that of P atoms in silicon; however, the device yield confirms the effectiveness of phosphorus as compared to aluminium.

  1. Microstructural path model and strain dependence of recrystallisation in commercial aluminium

    DEFF Research Database (Denmark)

    Vandermeer, Roy Allen; Wu, Guilin; Juul Jensen, Dorte

    2009-01-01

    The isothermal recrystallisation of commercial purity aluminium alloy AA1200 cold deformed to either a true strain of 2 (86.5% reduction in thickness) or 4 (98.2% reduction in thickness) was studied phenomenologically in each material by means of quantitative microscopy. The microstructural path ...

  2. Stopping power of aluminium for 5-12 MeV protons and deuterons

    DEFF Research Database (Denmark)

    Andersen, H.H.; Garfinkel, A.F.; Hanke, C.C.;

    1966-01-01

    The stopping power of aluminium for 5-12 MeV protons and deuterons has been measured by a thermometric compensation technique working at liquid helium temperature. The experimental method is described and the standard deviation of the results is found to be 0.3%. In order to obtain this accuracy...

  3. Use of propranolol-magnesium aluminium silicate intercalated complexes as drug reservoirs in polymeric matrix tablets

    Directory of Open Access Journals (Sweden)

    T Pongjanyakul

    2012-01-01

    Full Text Available The objective of the present study was to investigate the use of propranolol-magnesium aluminium silicate intercalated complexes as drug reservoirs in hydroxypropylmethylcellulose tablets. The matrix tablets containing the complexes were prepared and characterised with respect to propranolol release and were subsequently compared with those loading propranolol or a propranolol-magnesium aluminium silicate physical mixture. Additionally, the effects of varying viscosity grades of hydroxypropyl methylcellulose, compression pressures and calcium acetate incorporation on the drug release characteristics of the complex-loaded tablets were also examined. The results showed that the complex-loaded tablets have higher tablet hardness than those containing propranolol or a physical mixture. The drug release from the complex-loaded tablets followed a zero-order release kinetic, whereas an anomalous transport was found in the propranolol or physical mixture tablets. The drug release rate of the complex tablet significantly decreased with increasing hydroxypropylmethylcellulose viscosity grade. Increase in the compression pressure caused a decrease in the drug release rate of the tablets. Furthermore, the incorporation of calcium ions could accelerate propranolol release, particularly in acidic medium, because calcium ions could be exchanged with propranolol molecules intercalated in the silicate layers of magnesium aluminium silicate. These findings suggest that propranolol-magnesium aluminium silicate intercalated complexes show strong potential for use as drug reservoirs in matrix tablets intended for modifying drug release.

  4. Oxidation effects during laser cladding of aluminium with SiC/Al powders

    NARCIS (Netherlands)

    Hegge, H.J.; Boetje, J.; Hosson, J.Th.M. De

    1990-01-01

    Aluminium substrates were covered with a layer of an Al-SiC powder mixture. The surface was scanned with a laser beam during which the surface was melted. The top layer of the laser tracks contained oxide plates apart from some large SiC particles. In the bottom layer a cellular network was found wi

  5. Influence of Surface Modification of Alumina on Improvement of Wetability in Aluminium Matrix Composite

    Directory of Open Access Journals (Sweden)

    Alireza Samiee

    2014-01-01

    Full Text Available In this research, aluminium powder (50 wt% and alumina (50 wt% were first milled at a specific ball-to-powder ratio in a high-energy planetary mill at different times to manufacture Al-Al2O3 composite. Then, the capsules of powdery composites (Al-Al2O3CP produced at the milling stage were added to aluminium melt and cast through ex situ. Scanning electron microscope SEM was used to study the morphology of the capsules and the microstructure of the produced composite. The percentage of powdery composite capsules and reinforcing particles present in the microstructure of Al-Al2O3 composite was measured by Image Tool software. The results of the tests showed that, by optimizing the milling time to 5 hours, the alumina particles are sufficiently placed in the matrix of the capsules; on the other hand, alumina particles are also properly coated with aluminium powder. When these capsules are added to aluminium melt, the rate of the wetting of alumina particles greatly increases and accordingly the percentage of the reinforcing particles in the cast composite matrix increases dramatically. By surface modification and accordingly increasing percentage of Al2O3, the tensile strength increases and the tensile strength of the composites is higher than that of the matrix alloy.

  6. De bepaling van aluminium in slib met behulp van een nieuwe smelttechniek en XRF

    NARCIS (Netherlands)

    Boer JLM de; Boogerd JP

    1987-01-01

    Dit rapport beschrijft de monstervoorbereiding met behulp van een nieuwe smelttechniek en de analytische aspecten van de bepaling met behulp van rontgenfluorescentiespectrometrie (XRF) van aluminium en slib. De aanleiding tot dit onderzoek was de noodzaak om analytisch-chemische bijstand te verl

  7. Development of ordered nanostructures on anodic aluminium oxide and application as SERS-substrate

    DEFF Research Database (Denmark)

    Nielsen, Peter; Hassing, Søren; Morgen, Per;

    Hexagonalt ordnet nanoporøs aluminiumsoxid er blevet fremstillet ved kontrolleret anodisering af elektropoleret aluminium. Den selvordnende overflade kan anvendes bredt som udgangspunkt for udvikling af funktionelle nanostrukturer. I posteren vises udnyttelsen af den porøse overflade til fremstil...

  8. Gas-Phase Deposition of Ultrathin Aluminium Oxide Films on Nanoparticles at Ambient Conditions

    NARCIS (Netherlands)

    Valdesueiro Gonzalez, D.; Meesters, G.M.H.; Kreutzer, M.T.; Van Ommen, J.R.

    2015-01-01

    We have deposited aluminium oxide films by atomic layer deposition on titanium oxide nanoparticles in a fluidized bed reactor at 27 ± 3 °C and atmospheric pressure. Working at room temperature allows coating heat-sensitive materials, while working at atmospheric pressure would simplify the scale-up

  9. Dissolution and Protection of Aluminium Oxide in Corrosive Aqueous Media - An Ellipsometry and Reflectometry Study

    NARCIS (Netherlands)

    Karlsson, P.M.; Postmus, B.R.; Palmqvist, A.E.C.

    2009-01-01

    Dissolution of alumina has been studied from wafers in aqueous solution by means of ellipsometry and reflectometry. It was discovered that the dissolution of aluminium oxide is promoted by ethanol amines like N,N-bis(2-hydroxyethyl)glycine and triethanolamine, and that this dissolution is retarded b

  10. Experimental investigations on a CRDI system assisted diesel engine fuelled with aluminium oxide nanoparticles blended biodiesel

    Directory of Open Access Journals (Sweden)

    C. Syed Aalam

    2015-09-01

    Full Text Available Experiments were conducted to determine engine performance, exhaust emissions and combustion characteristics of a single cylinder, common rail direct injection (CRDI system assisted diesel engine using diesel with 25 percentage of zizipus jujube methyl ester blended fuel (ZJME25. Along with this ZJME25 aluminium oxide nanoparticles were added as additive in mass fractions of 25 ppm (AONP 25 and 50 ppm (AONP 50 with the help of a mechanical Homogenizer and an ultrasonicator. It was observed that aluminium oxide nanoparticles blended fuel exhibits a significant reduction in specific fuel consumption and exhaust emissions at all operating loads. At the full load, the magnitude of HC and smoke emission for the ZJME25 before the addition of aluminium oxide nanoparticles was 13.459 g/kW h and 79 HSU, whereas it was 8.599 g/kW h and 49 HSU for the AONP 50 blended ZJME25 fuel respectively. The results also showed a considerable enhancement in brake thermal efficiency and heat release rate due to the influence of aluminium oxide nanoparticles addition in biodiesel–diesel blend.

  11. Local buckling of aluminium structures exposed to fire. Part 1: Tests

    NARCIS (Netherlands)

    Maljaars, J.; Soetens, F.

    2009-01-01

    This paper describes an experimental investigation into local buckling of compressed aluminium alloy sections at elevated temperatures. Stress-strain relationships are derived based on uniaxial tensile tests. A special test set-up with a furnace is developed to test slender square hollow sections an

  12. Fatigue resistance of welded joints in aluminium high-speed craft: A total stress concept

    NARCIS (Netherlands)

    Den Besten, J.H.

    2015-01-01

    Crew transfers, surveillance duties and {security, rescue, interception} operations at sea typically require high-speed craft. Aluminium is quite often selected as hull structure material because of its weight save potential in comparison to steel. The fatigue strength, however, may become a point o

  13. Photophysical efficiency-boost of aqueous aluminium phthalocyanine by hybrid formation with nano-clays.

    Science.gov (United States)

    Staniford, Mark C; Lezhnina, Marina M; Gruener, Malte; Stegemann, Linda; Kuczius, Rauni; Bleicher, Vera; Strassert, Cristian A; Kynast, Ulrich H

    2015-09-11

    Novel organic-inorganic hybrid materials comprising nanoscaled layered silicates and native aluminium hydroxide phthalocyanine (Al(OH)Pc) allowed for the first time the exploitation of their unique photophysical properties in aqueous ambience. In particular, we were able to observe the efficient emission of Al(OH)Pc-nanoclay hybrids and generation of singlet oxygen in aqueous solution.

  14. Static and dynamic tensile behaviour of aluminium processed by high pressure torsion

    NARCIS (Netherlands)

    Verleysen, P.; Oelbrandt, W.; Naghdy, S.; Kestens, L.

    2015-01-01

    High pressure torsion (HPT) is a severe plastic deformation technique in which a small, disk-like sample is subjected to a torsional deformation under a high hydrostatic pressure. In present study, the static and dynamic tensile behaviour of commercially pure aluminium (99.6 wt%) processed by HPT is

  15. INVESTIGATION OF ECOLOGICAL SAFETY OF LUBRICATIONS FOR CASTING UNDER PRESSURE OF ALUMINIUM ALLOYS

    Directory of Open Access Journals (Sweden)

    A. M. Mihaltsov

    2008-01-01

    Full Text Available The investigations of environmental safety of different lubrications for moulds for casting under pressure of aluminium alloys are carried out. The method of carrying out of experiments on determination of harmful substances, escaping from lubrication in the process of destruction, is described.

  16. Local buckling of aluminium structures exposed to fire. Part 2: Finite element models

    NARCIS (Netherlands)

    Maljaars, J.; Soetens, F.

    2009-01-01

    A test series was carried out and reported in a corresponding paper on slender aluminium alloy sections, loaded in compression at elevated temperature. This paper gives the results of simulations of these tests with a finite element model. For this purpose, a novel constitutive model for fire expose

  17. Recycling of Glass Fibre Reinforced Aluminium Laminates and Silicon Removal from Aerospace Al Alloy

    NARCIS (Netherlands)

    Zhu, G.

    2012-01-01

    Aerospace aluminium alloys (7xxx and 2xxx series Al alloy) is one of the important Al alloys in our life. The recycling of aerospace Al alloy plays a significant role in sustainable development of Al industry. The fibre reinforced metal laminates GLARE including 67 wt.% 2024 Al alloy was used as upp

  18. Characterization of steam generated anti-corrosive oxide films on Aluminium alloys

    DEFF Research Database (Denmark)

    Din, Rameez Ud; Jellesen, Morten Stendahl; Ambat, Rajan

    2014-01-01

    alloy surfaces were exposed to high pressure steam produced by an autoclave at a temperature of 107 – 121 °C and pressure of 15 -17 psi for 10 minutes to produce a thin coating of aluminium oxide. The aim of this study is to understand the effect of high pressure steam with and without different...

  19. A study of aluminium-exposed fish using a scanning proton microprobe

    Energy Technology Data Exchange (ETDEWEB)

    Cholewa, M.; Legge, G.L.F. [Melbourne Univ., Parkville, VIC (Australia). School of Physics; Eeckhaoudt, S.; Van Grieken, R. [Universitaire Instelling Antwerpen, Antwerp (Belgium)

    1993-12-31

    A major problem has arisen in Europe with the depopulation of fresh water fish in lakes and streams collecting acid rain. The sensitivity to acidification is species specific and appears to be associated with metal levels. The Scanning Proton Microprobe (SPMP) at the Micro Analytical Research Centre of the University of Melbourne was used to study the subcellular distribution of aluminium and other elements in the gills of fish exposed to acidified water with elevated Al-levels. Experiments were performed on thin sections taken from fish exposed to media with different pH and aluminium concentration. Aluminium was found on the surface of the gill lamellae, but also inside the tissue. Bulk analysis of the gills showed much higher concentrations in the aluminium-exposed fish, compared to the control ones, but no information regarding the actual accumulation sites can be inferred. Extensive study of damage done to the sample by intense proton beams during elemental analysis was performed with scanning transmission ion microscopy. 3 refs., 3 figs.

  20. Fundamental studies of growth mechanisms in physical vapour deposition of aluminium

    CERN Document Server

    Knorr, N J

    2000-01-01

    temperature could be independently controlled due to the low deposition rate of the aluminium. The depositions were performed in a UHV environment to ensure that film growth was not mediated by contamination. The ion energy range used was 10-75eV and the substrate temperature varied from -100 deg C to 200 deg C. The depositions were onto silicon (100) with a native oxide surface, except for a set of depositions which were performed on to silicon with the native oxide surface removed. The cleanliness of the depositions was verified using in-situ XPS analysis and after deposition the structure of the aluminium films was inferred from measurements using SEM, TEM, AFM XRD and Nano-indendation. This information allowed the mechanisms of growth of the aluminium films to be investigated. In addition to the extensive array of IBDR depositions a series of aluminium films were deposited using evaporation and sputtering. These films were grown at substrate temperatures between room temperate and 200 deg C. The use of ev...