WorldWideScience

Sample records for altervative energy sources

  1. Altervative energy sources, principles, applications, state of the art and perspectives; Fuentes alternativas de energia, principios, aplicaciones, estado del arte y perspectivas

    Energy Technology Data Exchange (ETDEWEB)

    Saldana Flores, R; Gonzalez Galarza, R.; Ramos Berumen, C.; Agredano Diaz, J.; Arvizu Fernandex, J.L. [Instituto de Investigaciones Electricas (Mexico); Saldana Flores, R.; Gonzalez Galarza, R.; Ramos Berumen, C.; Agredano Diaz, J.; Arvizu Fernandez, J.L. [Instituto de Investigaciones Electricas (Mexico)

    1996-12-31

    All over the world, the energy availability has turned out to be one of the most important problems. The greatest majority of countries, developing as well as industrialized countries are being affected by the increasing demand of energy to satisfy their social and economic development goals and the need of complementing the conventional sources of energy with the non-conventional sources has become imperative for most of them. Beginning the last decade, it has been recognized the inevitability that in a non too far future the energy supply will suffer a transitional change from its present oil dependency towards more diversified energy combinations. This transition that involves the development of a variety of energy sources, with preference to the renewable sources, represents an important technological challenge that has to be attained in a gradual and orderly fashion. Among the new energy forms and the new technologies to obtain energy that have been considered to become a part of the energy supply in the future are the so called non-conventional sources of energy (NCSE) or alternative sources of energy, such as solar, biomass, wind power and small hydro stations. [Espanol] A nivel mundial, la disponibilidad de energia se ha convertido en uno de los problemas ms importantes. La gran mayoria de los paises, tanto en desarrollo como industrializados, se ven afectados por demandas crecientes de energia para satisfacer sus metas de desarrollo econonico y social, y la necesidad de complementar las fuentes comerciales con fuentes no convencionales se ha vuelto imperativa para la mayoria de ellos. A partir de la ultima decada, se ha reconocido como inevitable que en un futuro no muy lejano la oferta de energa debera sufrir una transicin desde su actual dependencia de los hidrocarburos hacia combinaciones energeticas mas diversificadas. Esta transicion que implica lograr el aprovechamiento de una variedad de fuentes de energia, prestando particular atencion a los

  2. Diversification of energy sources

    Science.gov (United States)

    1975-01-01

    The concept of energy source diversification was introduced as a substitution conservation action. The current status and philosophy behind a diversification program is presented in the context of a national energy policy. Advantages, disadvantages (constraints), and methods of implementation for diversification are discussed. The energy source systems for diversification are listed and an example impact assessment is outlined which deals with the water requirements of the specific energy systems.

  3. Alternative Energy Sources

    CERN Document Server

    Michaelides, Efstathios E (Stathis)

    2012-01-01

    Alternative Energy Sources is designed to give the reader, a clear view of the role each form of alternative energy may play in supplying the energy needs of the human society in the near and intermediate future (20-50 years).   The two first chapters on energy demand and supply and environmental effects, set the tone as to why the widespread use of alternative energy is essential for the future of human society. The third chapter exposes the reader to the laws of energy conversion processes, as well as the limitations of converting one energy form to another. The sections on exergy give a succinct, quantitative background on the capability/potential of each energy source to produce power on a global scale. The fourth, fifth and sixth chapters are expositions of fission and fusion nuclear energy. The following five chapters (seventh to eleventh) include detailed descriptions of the most common renewable energy sources – wind, solar, geothermal, biomass, hydroelectric – and some of the less common sources...

  4. Risks of energy sources

    International Nuclear Information System (INIS)

    The paper is devoted to comparative health and environmental risks of different energy sources and their influence to public perception, social acceptability and decision-making. The technical heights of the risks, expressed in the number of fatalities of labor and public per unit energy output, from fossil, nuclear and renewable sources are analysed and compared. The complete energy cycle from mining to waste disposal, as well as the future trends, are taken into account. A comparison of the risks of different energy systems with the anticipated global and national energy shares by source is also presented. Furthermore, detailed studies of the non-technical dimensions of the energy risks are performed. Using a modified attitude-behaviour model, the cognitive structure underlying the positions towards different energy options is investigated. Estimating the diverse acting of the risk components, the consequent changes in the rank ordering of the energy sources are deduced. Finally, adding the psychological components nuclear reaches the highest place. In this respect, a unified multidimensional space for the representation of various technological risks is introduced. It affords a comparison of the risks not only by their technical height, but also by other characteristics (involuntary, fearfulness etc.). Finally, it was pointed out that in considering the risk characteristics and constraints, as well as the external fields, a system approach has to be used, taking into account the risks simultaneously with the benefits. 12 refs, 4 figs, 2 tabs

  5. Uranium: inexhaustible energy source

    International Nuclear Information System (INIS)

    There exist two social worries in reference with the use of energy, to know, the first is the availability of energy resources for the near future, in terms that the main energy sources at the present, petroleum has a foreseeable limit, and the other, the possible negative effects that the use of fossil fuels, coal among them could have on the environment, the ecology and the life conditions for the human being in general. This two worries take us to consider the availability of uranium, as an alternate energy source for the future of the mankind, considering its lesser ecological impact, since it can be controlled. in this study, the results of several investigations concerning to the abundance, energetic content, extraction costs and the appropiate use of the uranium existing in the earth crust determining the period of time that this fuel can be used as energy source to satisfy the demand of a growing population of human beings on the eart, are re-examined. It is concluded that the utilization of this fuel in the so caled breeder reactors, could satisfy the energy demand for the whole humanity for a long period of time comparable to the life of the sunas a yellow star. (Author)

  6. A New Energy Source

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Foreign energy companies are flocking to China to participate in the development of a potentially meaningful new energy source, coalbed methane, which is found in coal deposits. China United Coalbed Methane Co. Ltd. signed a contract with U.S.-based Orion Energy International Inc. on April 5 to jointly exploit the resource in the Sanjiao region of coal-rich Shanxi Province. Covering an area of some 462 square km, Sanjiao is home to rich coalbed methane reserves with thick, multi-level coalbeds that have ...

  7. Energy sources and power plants

    International Nuclear Information System (INIS)

    Energy is obtained from various energy sources (coal, petroleum, natural gas, nuclear fuels, wind energy, solar energy, hydro power, biomass, geothermal energy). These differ in each case with respect to their availability, methods of their production and the required power plant technologies. As technologies of the future fuel cells and nuclear fusion are traded.

  8. Energy system comprising an electrochemical energy source

    NARCIS (Netherlands)

    Roozeboom, F.; Notten, P.

    2010-01-01

    The invention relates to an energy system comprising an electrochemical energy source, wherein said electrochemical energy source comprises at least one assembly of a first electrode, a second electrode, and an intermediate solid-state electrolyte separating said first electrode and said second elec

  9. Geothermal Energy : An Alternative Source of Energy

    Directory of Open Access Journals (Sweden)

    R R Shah

    2014-04-01

    Full Text Available Nowadays renewable sources are preferred over the non renewable source to generate the energy. The rapid rates of exhausting non-renewable resources have completed us to look out for new avenues in energy generation. According to global energy scenario, developed countries are adopting renewable resources as major source of energy. Geothermal energy originates from the original formation of the planet, from radioactive decay of minerals, and from solar energy absorbed at the surface. Geothermal energy is derived from the hot interior of the earth. The earth is a reservoir of heat energy, most of which is buried and is observed during episodes of volcanic eruption at the surfaces. Geothermal is one of the most promising renewable source of energy which is plentiful, eco-friendly, reliable and clean source of energy available in earth crust. In our country there is wide scope for the utilization of geothermal energy with proper strategically approach to meet the energy requirement. The future prospects of this heat energy as a sustainable source of renewable energy are indeed promising. Today India is the fifth largest consumer of electricity and by 2030 it will become third largest overtaking Japan and Russia according to statistical data available by Energy Planning Commission, Government of India.

  10. Economics and energy sources.

    Science.gov (United States)

    Munro, Malcolm G

    2013-01-01

    Energy-based instrumentation has not only facilitated the rapid adoption of laparoscopic surgery, but could be considered essential for the completion of abdominal and pelvic procedures under endoscopic guidance. For decades, relatively simple and generic reusable monopolar and bipolar systems were the only options available. More recently, the available options for energy-based surgical instrumentation have become more crowded with the introduction of ultrasound-based cutting and sealing instruments and proprietary, impedance monitoring radiofrequency coagulation devices. Such instrumentation is presented as being easier to use as well as providing greater safety and efficacy. However, these new instruments typically require the expenditure of capital for proprietary energy generators and are usually designed to be for single use, a circumstance that increases per case costs, a circumstance that begs the question of value. Do the additional costs expended for the more expensive devices translate into reduced complications, faster operating time, or even wider access to minimally invasive procedures because they enable more surgeons to offer the service? Herein is explored the complex economic issues associated with the use of energy-based surgical devices as they apply to minimal access surgery in general and to laparoscopic procedures specifically. PMID:23659752

  11. Economy of Alternative Energy Sources

    OpenAIRE

    Pincová, Olga

    2012-01-01

    This diploma thesis is about electricity production generated from renewable energy sources and their relation to investors and to the objectives of Czech Republic set by European Union. First part of this theses introduces renewable energy sources and conditions for their usage. Second part evaluates, by means of econometrics and three predefined scenarios, whether it is possible to meet objectives given by Strategy Europe 2020. In the third part, these scenarios are evaluated by mi...

  12. Energy production from renewable energy sources

    International Nuclear Information System (INIS)

    This table summarizes the electricity and heat produced in France and in overseas departments from renewable energy sources for 1998 (revised), 1999 (temporary) and 2000 (estimated): hydraulic, wind, solar photovoltaic and thermal, geothermal, solid municipal wastes, wood and wood wastes, biogas, ethanol and ester bio-fuels. (J.S.)

  13. Nuclear power: tomorrow's energy source

    International Nuclear Information System (INIS)

    In France, 76% of electricity is produced by nuclear power. The industry's pricing levels are among the most competitive in Europe. Thanks to its 58 nuclear reactors France enjoys almost 50% energy autonomy thus ensuring a highly stable supply. Equally, as a non-producer of greenhouse gases, the nuclear sector can rightfully claim to have an environmentally friendly impact. Against a background to increasing global demand with predictions that fossil fuels will run out and global warming a central issue, it is important to use production methods which face up to problems of this nature. There is no question that nuclear energy has a vital role to play alongside other energy sources. (authors)

  14. New renewable energy sources; Nye fornybare energikilder

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-07-01

    This booklet describes in simple terms the so-called new renewable energy sources: solar energy, biomass, wind power and wave power. In addition, there are brief discussions on hydrogen, ocean thermal energy conversion (OTEC), tidal power, geothermal energy, small hydropower plants and energy from salt gradients. The concept of new renewable energy sources is used to exclude large hydropower plants as these are considered conventional energy sources. The booklet also discusses the present energy use, the external frames for new renewable energy sources, and prospects for the future energy supply.

  15. Potential of renewable and alternative energy sources

    OpenAIRE

    Konovalov, Vyacheslav Vasilievich; Pozharnitskaya, Olga Vyacheslavovna; Rostovshchikova, А.; Matveenko, Irina Alekseevna

    2015-01-01

    The article deals with application potential of clean alternative renewable energy sources. By means of system analysis the forecast for consumption of electrical energy in Tomsk Oblast as well as main energy sources of existing energy system have been studied up to 2018. Engineering potential of renewable and alternative energy sources is evaluated. Besides, ranking in the order of their efficiency descending is performed. It is concluded that Tomsk Oblast has high potential of alternative a...

  16. Potential of renewable and alternative energy sources

    Science.gov (United States)

    Konovalov, V.; Pogharnitskaya, O.; Rostovshchikova, A.; Matveenko, I.

    2015-11-01

    The article deals with application potential of clean alternative renewable energy sources. By means of system analysis the forecast for consumption of electrical energy in Tomsk Oblast as well as main energy sources of existing energy system have been studied up to 2018. Engineering potential of renewable and alternative energy sources is evaluated. Besides, ranking in the order of their efficiency descending is performed. It is concluded that Tomsk Oblast has high potential of alternative and renewable energy sources, among which the most promising development perspective is implementation of gasification stations to save fuel consumed by diesel power stations as well as building wind-power plants.

  17. Renewable energy sources: Energy Efficiency Agency

    International Nuclear Information System (INIS)

    The paper presents the activities of the Energy Efficiency Agency, its main functions, as well as the new legislation stimulating the use of RES, stipulated in the new Energy Law of Bulgaria. The second part of the paper describes the potential of renewable energy in i.e. wind energy; solar energy; biomass energy; hydro energy; geothermal energy; draft of a National Program on RES 2005-2015. The third part describes the main issues of the new ENERGY EFFICIENCY LAW and the established Energy efficiency fund. (Author)

  18. Conservation as an alternative energy source

    Science.gov (United States)

    Allen, D. E.

    1978-01-01

    A speech is given outlining the energy situation in the United States. It is warned that the existing energy situation cannot prevail and the time is fast running out for continued growth or even maintenance of present levels. Energy conservation measures are given as an aid to decrease U.S. energy consumption, which would allow more time to develop alternative sources of energy.

  19. Scheduling under non-reversible energy sources

    OpenAIRE

    Ngueveu, Sandra Ulrich; Artigues, Christian; Lopez, Pierre

    2016-01-01

    In this paper, we address a preemptive scheduling problem involving multiple non-reversible energy sources. To the classical scheduling issue, an additional decision level is added regarding the selection of the energy source used to satisfy the total power demand of tasks processed at each instant. Different non-reversible energy sources are available, with different characteristics in terms of efficiency and power range. The objective is to identify the best combination between scheduling a...

  20. Life cycle assessment of renewable energy sources

    CERN Document Server

    Singh, Anoop; Olsen, Stig Irving

    2013-01-01

    Governments are setting challenging targets to increase the production of energy and transport fuel from sustainable sources. The emphasis is increasingly on renewable sources including wind, solar, geothermal, biomass based biofuel, photovoltaics or energy recovery from waste. What are the environmental consequences of adopting these other sources? How do these various sources compare to each other? Life Cycle Assessment of Renewable Energy Sources tries to answer these questions based on the universally adopted method of Life Cycle Assessment (LCA). This book introduces the concept and impor

  1. Possibility of accumulation of energy from renewable energy sources

    OpenAIRE

    Hanuš, Jan

    2012-01-01

    This thesis discusses issues of renewable sources energy accumulation. The first part describes possibilities of gaining energy from renewable sources, especially in our climatic conditions. In the second part a summary of energy accumulation methods is presented. The last part in detail analyses energy accumulation process at a pumped-storage power plant in conditions of the Czech Republic.

  2. Thorium is an ultimate source of energy

    OpenAIRE

    Kim, HungGeun; Lee, Sangcheol

    2013-01-01

    This article is written for readers to help the understanding of thorium as an alternative source of nuclear energy. Thorium (Thorium) can be applied for reactor fuels and thorium energy development such as ADSR; Accelerator Driven Subcritical Reactor. This particle explains the thorium as a possible choice to replace of uranium to supply enormous energy could be the energy source. A Korean article published in "Science Times" in South Korea. The article is based on an interview ...

  3. Sustainable Energy Sources and Developing Clean Energy Technologies

    OpenAIRE

    Reis, A. Heitor; Miguel, A. F.

    2009-01-01

    Energy and sustainability are issues in the global agenda. The concern for the impacts of energy use, which adds to the alarm for the scarcity of primary sources of energy has triggered new research on sustainable primary energy sources and on clean and efficient energy systems and processes. Due to the current global warming, the link between energy and environment becomes inescapable in such a way that researchers have to deal both with efficiency and environmental impacts.

  4. Fusion energy - an abundant energy source for the future

    OpenAIRE

    Korsholm, Søren Bang

    2009-01-01

    Fusion energy is the fundamental energy source of the Universe, as the energy of the Sun and the stars are produced by fusion of e.g. hydrogen to helium. Fusion energy research is a strongly international endeavor aiming at realizing fusion energy production in power plants on Earth. Reaching this goal, mankind will have a sustainable base load energy source with abundant resources, having no CO2 release, and with no longlived radioactive waste. This presentation will describe the basics of f...

  5. Geothermal Energy as source or energy production

    International Nuclear Information System (INIS)

    This article shows the use and utilization of geothermal energy. This calorific energy can be used, through the wells perforation, in generation of electricity and many other tasks. In Colombia is possible the utilization of this energy in the electrical production due to the volcanic presence in the Western and Central mountain chains

  6. Energy sources for the future

    Energy Technology Data Exchange (ETDEWEB)

    Duggan, J.L.; Cloutier, R.J. (eds.)

    1977-04-01

    The symposium program was designed for college faculty members who are teaching or plan to teach energy courses at their educational institutions. Lectures were presented on socio-economic aspects of energy development, fusion reactors, solar energy, coal-fired power plants, nuclear power, radioactive waste disposal, and radiation hazards. A separate abstract was prepared for each of 16 of the 18 papers presented; two papers were processed earlier: Residential Energy Use Alternatives to the Year 2000, by Eric Hurst (EAPA 2:257; ERA 1:25978) and The Long-Term Prospects for Solar Energy, by W. G. Pollard (EAPA 3:1008). Fourteen of the papers are included in Energy Abstracts for Policy Analysis. (EAPA).

  7. A Web Based Puzzle for Energy Sources

    Directory of Open Access Journals (Sweden)

    Nilgun SECKEN

    2006-07-01

    Full Text Available At present many countries in the world consume too much fossil fuels such as petroleum, natural gas and coal to meet their energy needs. These fossil fuels are not renewable; their sources are limited and reducing gradually. More importantly they have been becoming more expensive day by day and their damage to the environment has been increasing. In spite of it, renewable energy sources are renewed and never run out. In addition there are many benefits of renewable energy. In this study a puzzle is prepared for primary-school students aiming at teaching of energy sources as a supplementary source. In the mean time, the puzzle we prepared reveals the advantages and disadvantages of renewable and fossil energy sources. Here, the student’s aim is to complete the puzzle by answering the questions respectively. .

  8. Renewable Energy Sources on the Polish Electrical Energy Market

    OpenAIRE

    Paweł Bućko

    2014-01-01

    Production of electricity from renewable energy sources in Poland is presented in the paper. The mechanism of energy origin certificates market and the proposal of mechanism modification are discussed. Perspectives of electricity production from renewable energy sources are indicated and discussed.

  9. Green Certificates – the Symbol Renewable Energy Sources (Clean Energy)

    OpenAIRE

    Mihaela Ghicajanu

    2006-01-01

    In this paper present one alternative solution as regards of the suplimentary power generation - renerawable energy sources. Are present a few words about renewable energy sources and green certificates; policy European Union of the renewable energy power and situation green certificates market on Romania.

  10. SOURCES OF ENERGY AND THE ENVIRONMENT

    OpenAIRE

    Clive L. Spash; Young, Andrew

    1994-01-01

    Energy from fossil fuels have become dominant in the industrialised and industrialising economies of the world. However, fossil fuels are also recognised as heavily polluting and responsible for a range of modern environmental and health problems. Nuclear power is a similar conventional energy source in that it relies upon depletion of a limited stock resource and is associated with a range of social and environmental problems. However, the alternative energy sources relying upon flow reso...

  11. ALTERNATIVE SOURCES OF ENERGY - ALTERNATIVE SOURCES OF POLLUTION?

    Directory of Open Access Journals (Sweden)

    Marius-Razvan SURUGIU

    2007-06-01

    Full Text Available In many countries of the world investments are made for obtaining energy efficiency, pursuing to increase the generation of non-polluting fuels due to the fact that energy is vital for any economy. The increase in non-polluting fuels and in renewable energy generation might lead to diminishing the dependence of countries less endowed with conventional energy resources on oil and natural gas from Russia or from Arab countries. Nevertheless, environmental issues represent serious questions facing the mankind, requiring the identification, prevention, and why not, their total solving.European Union countries depend on imports of energy, especially on oil imports. At the same time, the European Union countries record a high volume of greenhouse gas emissions, substances adding to global warming. The transport sector is the main consumer of fossil fuels and generator of greenhouse gas emissions. Therefore, diversifying the energy supply used in the transport sector with less polluting sources is an essential objective of the European Union policy in the transport, energy and environment sector. Road transports’ is the sector recording the highest consumption of energy and the highest volume of greenhouse gas emissions.The use of ecologic fuels in the transport sector is an important factor for achieving the objectives of European policies in the field. It is yet to be seen to what extent alternative energy sources are damaging to the environment, as it is a known fact that even for them is recorded a certain level of negative externalities.

  12. Renewable energy sources in agriculture

    International Nuclear Information System (INIS)

    Greenhouse crop evolution if from one hand improves the quality of products and productive cycles, from another hand cause negative effects on the natural resources, the environment and the economy of the country. Although renewable energies already feature to some extent in the European Union's regional, the 2007-2013 Structural Funds package could be the occasion to increase the weight given to RES within the energy programmes for less favoured regions (particularly in ex-objective 1 areas). In those areas, greenhouse crop sector is particularly developed as agriculture industrial activity. According to numerous investigations, agricultural greenhouse consumption for greenhouse acclimatization represents approximately between 2% to 6% of the E U's-27 total energy consumption. This report is intended to give a general overview to the potential of renewable energy and technology in Italy, particularly geothermal, wind and solar (thermic and photovoltaic) as energy for greenhouse crop sector. RES have a high potential for developing of indigenous resources, service activities, new job creation and reducing Co2 emissions.

  13. Energy technology sources, systems and frontier conversion

    CERN Document Server

    Ohta, Tokio

    1994-01-01

    This book provides a concise and technical overview of energy technology: the sources of energy, energy systems and frontier conversion. As well as serving as a basic reference book for professional scientists and students of energy, it is intended for scientists and policy makers in other disciplines (including practising engineers, biologists, physicists, economists and managers in energy related industries) who need an up-to-date and authoritative guide to the field of energy technology.Energy systems and their elemental technologies are introduced and evaluated from the view point

  14. Renewable energy sources 1991, part 2

    Science.gov (United States)

    Michalicka, L.

    1991-12-01

    The International Conference on Renewable Energy Sources was held in Prague on 1-4 Jul. 1991. Part 2 of the proceedings is devoted to the use of the energy of wind, biogas, and small hydroelectric sources. The publication contains 14 contributions, of which 3 were inputted in INIS. Topics covered include: a wind power plant in Sweden and its environmental impacts, economic aspects of the introduction of alternative energy sources in Czechoslovakia, and the efficiency of application of a Fresnel lens-based solar collector.

  15. Renewable energy sources; Erneuerbare Energien

    Energy Technology Data Exchange (ETDEWEB)

    Fischer, Peter [RAG Aktiengesellschaft, Herne (Germany)

    2011-11-15

    Under the umbrella of RAG Aktiengesellschaft (Herne, Federal Republic of Germany) the RAG Deutsche Steinkohle (Herne, Federal Republic of Germany), RAG Anthrazit Ibbenbueren (Ibbenbueren, Federal Republic of Germany), the RAG Montan Immobilien (Essen, Federal Republic of Germany) as well as the RAG Mining Solutions (Herne, Federal Republic of Germany) are unified. With their activities in the German coal mining industry RAG contributes to the national energy security and create employment effects far beyond the mining regions.

  16. Renewable energy sources in CR

    OpenAIRE

    Pokorný, Tomáš

    2010-01-01

    Tato práce se zabývá klasifikací obnovitelných zdrojů energie a jejich porovnáním s ostatními energetickými zdroji. Vyjmenovává a charakterizuje zdroje sluneční, vodní, větrné, geotermální energie a biomasy, tedy energie vyráběné z obnovitelných zdrojů. Popisuje využití těchto jednotlivých zdrojů v rámci České republiky. Další část se zabývá legislativou a to zejména zákonem 180/2005 sb. Na závěr jsou uvedeny další zákony a vyhlášky, které s výrobou elektřiny z obnovitelných zdrojů a její dis...

  17. Renewable energy sources '91. Part 2

    International Nuclear Information System (INIS)

    Part 2 of the proceedings is devoted to the use of the energy of wind, biogas and small hydroelectric sources. The publication contains 14 contributions, out of which 3 have been inputted in INIS. They deal with a wind power plant in Sweden and its environmental impacts, economic aspects of the introduction of alternative energy sources in Czechoslovakia, and with the efficiency of application of a Fresnel lens-based solar collector. (M.D.). 5 figs., 1 tab., 2 refs

  18. GASAHOL: a potential energy source

    Energy Technology Data Exchange (ETDEWEB)

    Cannon, R.J.

    1978-04-01

    The production of GASOHOL and/or a synthetic fuel using any agricultural product as a portion of a mixture with gasoline is presently held in a fanaticism/mania context by both the proponents and opponents. There is a tremendous interest in GASOHOL throughout the country as shown by the enormous amount of material that has been written on the subject both pro and con. In addition, a variety of legislation at the state and Federal levels concerning an ethanol-gasoline mix either has been passed or is pending. This extensive amount of activity has been going on for the past 3 or 4 years and yet nothing really positive has happened. One reason is the lack of capital to get started. Congress is working on this problem and, coupled with some of the state legislatures, this hurdle should soon be overcome. Another reason and/or reasons are often vociferously pointed out by the opponents - those being the poor economics of such an advanture and a negative input-output energy ratio in producing ethanol. On the economics both sides will agree that a public subsidy, probably in the form of tax credits, is necessary in order for GASOHOL to be competitive with gasoline. The amount of this subsidy varies under different assumptions and by region. Whether the production of ethanol from grain is energy-efficient or not remains a question of debate, and it is in this area that the pros and cons are in most disagreement. There are regional exceptions to the energy balance - Hawaii being one of them. Current plans in the State of Hawaii consist of utilizing molasses, a byproduct of sugar production, to product ethanol. Since molasses is a byproduct, one can supposedly start the distilling process with a zero energy input. It is generally agreed that the mixing of ethanol and gasoline is technically possible. Thus, it seems likely, that there is or will be some Federal and state money available for plant construction, and that one or more demonstration projects will be undertaken.

  19. High-Energy Compton Scattering Light Sources

    CERN Document Server

    Hartemann, Fred V; Barty, C; Crane, John; Gibson, David J; Hartouni, E P; Tremaine, Aaron M

    2005-01-01

    No monochromatic, high-brightness, tunable light sources currently exist above 100 keV. Important applications that would benefit from such new hard x-ray sources include: nuclear resonance fluorescence spectroscopy, time-resolved positron annihilation spectroscopy, and MeV flash radiography. The peak brightness of Compton scattering light sources is derived for head-on collisions and found to scale with the electron beam brightness and the drive laser pulse energy. This gamma 2

  20. Can renewable energy sources sustain affluent society?

    International Nuclear Information System (INIS)

    Figures commonly quoted on costs of generating energy from renewable sources can give the impression that it will be possible to switch to renewables as the foundation for the continuation of industrial societies with high material living standards. Although renewable energy must be the sole source in a sustainable society, major difficulties become evident when conversions, storage and supply for high latitudes are considered. It is concluded that renewable energy sources will not be able to sustain present rich world levels of energy use and that a sustainable world order must be based on acceptance of much lower per capita levels of energy use, much lower living standards and a zero growth economy. (Author)

  1. Alternatives sources of energy in the Czech energy mix

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Lisy; Marek, Balas; Zdenek, Skala

    2010-09-15

    The paper features a basic outline of the situation in the energy sector of the Czech Republic. It brings information about the current state of the country's energy mix and indicative targets of the State Energy Policy. Though coal and nuclear energy will remain the country's energy staples, great stress is also put on the growth of share of renewable and alternative energy sources. Out of these, the greatest potential in the Czech Republic is that of biomass and waste. To make the use of these sources cost-effective, it is necessary to put stress on heat and power cogeneration.

  2. Alpha Schottky junction energy source

    Science.gov (United States)

    Litz, Marc S.; Fan, Zhaoyang; Carroll, James J.; Bayne, Stephen

    2012-06-01

    Isotope batteries offer solutions for long-lived low-power sensor requirements. Alpha emitting isotopes have energy per decay 103 times that of beta emitters. Alpha particles are absorbed within 20 μm of most materials reducing shielding mitigation. However, damage to materials from the alphas limits their practical use. A Schottky Barrier Diode (SBD) geometry is considered with an alpha emitting contact-layer on a diamond-like crystal semiconductor region. The radiation tolerance of diamond, the safety of alpha particles, combined with the internal field of the SBD is expected to generate current useful for low-power electronic devices over decades. Device design parameters and calculations of the expected current are described.

  3. CARDOON, RENEWABLE SOURCE OF ENERGY

    Directory of Open Access Journals (Sweden)

    Cecilia NEAGU

    2013-01-01

    Full Text Available Cardoon (Cynara cardunculus is a herbaceous perennial plant in the vegetable, artichoke, wild or garden, which belongs to the Compositae family (Asteraceae Compositae-and more precisely Cynara species and is grown specifically for the production of biomass (solid bio fuel as a pellet, or solid and liquid bio fuel, bio diesel. In this paper I have tried to highlight the profitability and economic efficiency of growing of this plant. Production capacity exceeding 2 tonnes dry matter/1000mp. The yield depends on climatic conditions, adequate soil moisture, soil nutrients, and range from 1 to 3 t/1000mp, dry. Cardoon seed contains on average 24% oil (category: 19-32%, with the same qualities as the sunflower. Quantity of seed production to 480 kgs/1000mp, while ordinary productivities range 70 to 330 kg/1000mp, always depending on the total biomass production. Growing cardooncan replace traditional crops, partly by ensuring a good profit for the farmer (double the wheat and rapeseed and bio fuel production with high energy content. Solid bio fuels (pellets, briquettes, artichokes, etc. can reach the enduser, at prices up to 30-40% lower than the price of oil. Because cardoon is a perennial plant which grows once every 10-12 years, and preparing the ground and sowing it will be carried out at intervals so large (this plant is harvested annually,it is remarkable cost reduction efficiency of growing this plant.In addition to the obvious environmental advantages by producing green energy, growing artichokes garden preserves the soil covered for the most part of the year, thereby minimizing the risk of soil erosion and limit the pollution of soil and groundwater with agrochemical products, especially in areas with intensive agriculture, because it does not require additional fertilization and/or with the use of chemical fertilizers or pesticides.

  4. High Energy Sources Monitored with OMC

    CERN Document Server

    Risquez, D; Caballero-Garcia, M D; Alfonso-Garzon, J; Mas-Hesse, J M

    2008-01-01

    The Optical Monitoring Camera on-board INTEGRAL (OMC) provides Johnson V band photometry of any potentially variable source within its field of view. Taking advantage of the INTEGRAL capabilities allowing the simultaneous observation of different kind of objects in the optical, X and gamma rays bands, we have performed a study of the optical counterparts of different high-energy sources. Up to now, OMC has detected the optical counterpart for more than 100 sources from the High Energy Catalog (Ebisawa et al., 2003). The photometrically calibrated light curves produced by OMC can be accessed through our web portal at: http://sdc.laeff.inta.es/omc

  5. A Web Based Puzzle for Energy Sources

    OpenAIRE

    Nilgun SECKEN

    2006-01-01

    At present many countries in the world consume too much fossil fuels such as petroleum, natural gas and coal to meet their energy needs. These fossil fuels are not renewable; their sources are limited and reducing gradually. More importantly they have been becoming more expensive day by day and their damage to the environment has been increasing. In spite of it, renewable energy sources are renewed and never run out. In addition there are many benefits of renewable energy. In this study a puz...

  6. Action plan for renewable energy sources

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In the Finnish Energy Strategy, approved by the Finnish Government in 1997, the emphasis is laid on the importance of bioenergy and other renewable energy sources for the creation of such prerequisites for the Finnish energy economy that the supply of energy can be secured, the price on energy is competitive and the emissions from energy generation are within the limits set by the international commitments made by Finland. In 1998, the European Union Meeting of the Ministers of Energy adopted a resolution taking a positive attitude to the Communication from the Commission 'Energy for the future: Renewable sources of energy' - White Paper for a Community Strategy and Action Plan. National measures play a key role in the achievement of the objectives set in the White Paper. This Action Plan for Renewable Energy Sources is a national programme in line with the EU's White Paper. It comprises all renewable sources of energy available in Finland. It encompasses even peat, which in Finland has traditionally been considered to be a solid biofuel but is internationally classified as one of the non-renewable sources of energy. In the Action Plan, objectives are set for the volume of renewable energy sources used in the year 2010 including a prognosis on the development by the year 2025. The goal is that by the year 2010 the volume of energy generated using renewable energy sources has increased by 50% compared with the year 1995. This would mean an increase by 3 Mtoe, which is about 1 Mtoe more than anticipated in the outlook based on the Finnish Energy Strategy. A further goal is to double the use of renewable energy sources by the year 2025. The aggregate use of renewable energy sources depends to a large extent both on the development of the price on energy produced using other energy sources and on possible changes in the production volume of the Finnish forest industry. The most important objective stated in the Action Plan is to improve the

  7. Action plan for renewable energy sources

    International Nuclear Information System (INIS)

    In the Finnish Energy Strategy, approved by the Finnish Government in 1997, the emphasis is laid on the importance of bioenergy and other renewable energy sources for the creation of such prerequisites for the Finnish energy economy that the supply of energy can be secured, the price on energy is competitive and the emissions from energy generation are within the limits set by the international commitments made by Finland. In 1998, the European Union Meeting of the Ministers of Energy adopted a resolution taking a positive attitude to the Communication from the Commission 'Energy for the future: Renewable sources of energy' - White Paper for a Community Strategy and Action Plan. National measures play a key role in the achievement of the objectives set in the White Paper. This Action Plan for Renewable Energy Sources is a national programme in line with the EU's White Paper. It comprises all renewable sources of energy available in Finland. It encompasses even peat, which in Finland has traditionally been considered to be a solid biofuel but is internationally classified as one of the non-renewable sources of energy. In the Action Plan, objectives are set for the volume of renewable energy sources used in the year 2010 including a prognosis on the development by the year 2025. The goal is that by the year 2010 the volume of energy generated using renewable energy sources has increased by 50% compared with the year 1995. This would mean an increase by 3 Mtoe, which is about 1 Mtoe more than anticipated in the outlook based on the Finnish Energy Strategy. A further goal is to double the use of renewable energy sources by the year 2025. The aggregate use of renewable energy sources depends to a large extent both on the development of the price on energy produced using other energy sources and on possible changes in the production volume of the Finnish forest industry. The most important objective stated in the Action Plan is to improve the competitiveness of renewable

  8. Fusion energy - an abundant energy source for the future

    DEFF Research Database (Denmark)

    goal, mankind will have a sustainable base load energy source with abundant resources, having no CO2 release, and with no longlived radioactive waste. This presentation will describe the basics of fusion energy production and the status and future prospects of the research. Considerations of...... integration into the future electricity system and socio-economic studies of fusion energy will be presented, referring to the programme of Socio-Economic Research on Fusion (SERF) under the European Fusion Energy Agreement (EFDA).......Fusion energy is the fundamental energy source of the Universe, as the energy of the Sun and the stars are produced by fusion of e.g. hydrogen to helium. Fusion energy research is a strongly international endeavor aiming at realizing fusion energy production in power plants on Earth. Reaching this...

  9. Extra galactic sources of high energy neutrinos

    CERN Document Server

    Waxman, E

    2005-01-01

    The main goal of the construction of large volume, high energy neutrino telescopes is the detection of extra-Galactic neutrino sources. The existence of such sources is implied by observations of ultra-high energy, >10^{19} eV, cosmic-rays (UHECRs), the origin of which is a mystery. The observed UHECR flux sets an upper bound to the extra-Galactic high energy neutrino intensity, which implies that the detector size required to detect the signal in the energy range of 1 TeV to 1 PeV is >=1 giga-ton, and much larger at higher energy. Optical Cerenkov neutrino detectors, currently being constructed under ice and water, are expected to achieve 1 giga-ton effective volume for 1 TeV to 1 PeV neutrinos. Coherent radio Cerenkov detectors (and possibly large air-shower detectors) will provide the >> 1 giga-ton effective volume required for detection at ~10^{19} eV. Detection of high energy neutrinos associated with electromagnetically identified sources will allow to identify the sources of UHECRs, will provide a uniq...

  10. Nuclear energy - a source of sustainable, clean and safe energy

    International Nuclear Information System (INIS)

    This paper discusses various factors which make nuclear energy an attractive source of cheap, reliable and clean power in Indian scenario, with a special reference to Kudankulam Nuclear Power Project (KKNPP)

  11. Open Source Energy Simulation for Elementary School

    CERN Document Server

    Lye, Sze Yee

    2012-01-01

    With the interactivity and multiple representation features, computer simulations lend itself to the guided inquiry learning. However, these simulations are usually designed for post-elementary students. Thus, the aim of this study is to investigate how the use of guided inquiry approach with customized energy simulation can improve students' understanding of this topic. In this ongoing research, the case study is adopted. In the first phase of the study, we have modified open source energy simulation based on principles for reducing extraneous processing, existing energy simulation and guided inquiry approach. The modified simulation is sent to teachers for evaluation and the feedback is encouraging. In the next phase of the study, the guided inquiry lesson package involving the energy simulation would be designed and deployed in an elementary classroom. Multiple data sources would be collected to seek a deeper understanding on how this learning package can possibly impact students' understanding of the phys...

  12. New renewable energy sources: Strategies and prospects

    International Nuclear Information System (INIS)

    An assessment is made of the technological reliability, and environmental and economic benefits of biomass, wind and photovoltaic energy sources in meeting the world's ever increasing demand for electric power. This assessment favours R ampersand D investment for the commercialization of processes involving the production of hydrogen through photovoltaic energy conversion. These plants are especially recommended for oil importing third world countries located in tropical areas

  13. Olive cake used as an energy source

    International Nuclear Information System (INIS)

    In order to reduce global warming, biomass is expected to become one of the key energy resources. The solid wastes of olives are called as olive cake. This has been in use as an energy source. After the oil crisis in 1970s, there has been increase in studies of alternative and renewable energy resources as well as fuel technologies. However fossil fuels still preserve the predominant position satisfying 90% of the world energy consumption. On the basis of the sustainable development principle and suggestions of Kyoto protocol, their has been an emphasis on the urgent need for reduction of the emission of green house gases the generates negative impact on ozone and replacing current energy resources with renewable energy

  14. Energy scavenging sources for biomedical sensors

    International Nuclear Information System (INIS)

    Energy scavenging has increasingly become an interesting option for powering electronic devices because of the almost infinite lifetime and the non-dependence on fuels for energy generation. Moreover, the rise of wireless technologies promises new applications in medical monitoring systems, but these still face limitations due to battery lifetime and size. A trade-off of these two factors has typically governed the size, useful life and capabilities of an autonomous system. Energy generation from sources such as motion, light and temperature gradients has been established as commercially viable alternatives to batteries for human-powered flashlights, solar calculators, radio receivers and thermal-powered wristwatches, among others. Research on energy harvesting from human activities has also addressed the feasibility of powering wearable or implantable systems. Biomedical sensors can take advantage of human-based activities as the energy source for energy scavengers. This review describes the state of the art of energy scavenging technologies for powering sensors and instrumentation of physiological variables. After a short description of the human power and the energy generation limits, the different transduction mechanisms, recent developments and challenges faced are reviewed and discussed. (topical review)

  15. Power conversion from environmentally scavenged energy sources.

    Energy Technology Data Exchange (ETDEWEB)

    Druxman, Lee Daniel

    2007-09-01

    As the power requirements for modern electronics continue to decrease, many devices which were once dependent on wired power are now being implemented as portable devices operating from self-contained power sources. The most prominent source of portable power is the electrochemical battery, which converts chemical energy into electricity. However, long lasting batteries require large amounts of space for chemical storage, and inevitably require replacement when the chemical reaction no longer takes place. There are many transducers and scavenging energy sources (SES) that are able to exploit their environment to generate low levels of electrical power over a long-term time period, including photovoltaic cells, thermoelectric generators, thermionic generators, and kinetic/piezoelectric power generators. This generated power is sustainable as long as specific environmental conditions exist and also does not require the large volume of a long lifetime battery. In addition to the required voltage generation, stable power conversion requires excess energy to be efficiently stored in an ultracapacitor or similar device and monitoring control algorithms to be implemented, while computer modeling and simulation can be used to complement experimental testing. However, building an efficient and stable power source scavenged from a varying input source is challenging.

  16. Energy source possibilities in underwater technics

    Science.gov (United States)

    Farin, Juho

    1991-04-01

    Underwater energy source possibilities are treated. The power demand of underwater vehicles is restricted to approximately 0.5 MW. Besides well known primary and secondary batteries as well as conventional diesel engines and closed cycle diesels, fuel cells, radio nuclear isotopes and small nuclear reactors have already been installed or tested in conditions representative of underwater.

  17. CIVIL REGULATION OF USING RENEWABLE ENERGY SOURCES

    Directory of Open Access Journals (Sweden)

    Kamyshanskiy V. P.

    2013-10-01

    Full Text Available This article deals with civil regulation of using renewable energy sources. To deal with such items we need to understand a clear definition of this concept and to consider the specifics of Public-Private Partnership in such claims

  18. Reusable Energy and Power Sources: Rechargeable Batteries

    Science.gov (United States)

    Hsiung, Steve C.; Ritz, John M.

    2007-01-01

    Rechargeable batteries are very popular within consumer electronics. If one uses a cell phone or portable electric tool, she/he understands the need to have a reliable product and the need to remember to use the recharging systems that follow a cycle of charge/discharge. Rechargeable batteries are being called "green" energy sources. They are a…

  19. Energy sources for future. Change to a sustainable energy system

    International Nuclear Information System (INIS)

    Can Germany give up gasoline and power from coal or nuclear energy and how much does it cost? The book does away with all common misunderstandings due to renewable energy sources and describes a compatible model for a sustainable energy mixing in future. Nevertheless fossil fuels are not denounced but seen as a platform for the advanced system. The author explains first why objections to renewable energy sources base on bad information, and pursues quite an other argumentation as such authors emphasizing the potential of these energy sources. Than he shows in detail the possibility of the optimal energy mixing for biomass, solar power, wind power, geothermal energy, hydropower and energy efficiency. The environment will reward us for this and instead buying expensive resources from foreign countries we will create work places at home. The number of big power plants - taking into account safety risks - will decrease and small units of on-site power generation feeded with this renewable sources will play more and more an important role. (GL)

  20. Kansas Energy Sources: A Geological Review

    International Nuclear Information System (INIS)

    Kansas produces both conventional energy (oil, gas, and coal) and nonconventional (coalbed gas, wind, hydropower, nuclear, geothermal, solar, and biofuels) and ranks the 22nd in state energy production in the U.S. Nonrenewable conventional petroleum is the most important energy source with nonrenewable, nonconventional coalbed methane gas becoming increasingly important. Many stratigraphic units produce oil and/or gas somewhere in the state with the exception of the Salina Basin in north-central Kansas. Coalbed methane is produced from shallow wells drilled into the thin coal units in southeastern Kansas. At present, only two surface coal mines are active in southeastern Kansas. Although Kansas has been a major exporter of energy in the past (it ranked first in oil production in 1916), now, it is an energy importer.

  1. Renewable energy sources: resistance to change

    International Nuclear Information System (INIS)

    This paper is the summary of a conference day organised by the students of the 'environment and sustainable development law' Master of Nantes university (France). This interdisciplinary meeting brought together professionals of renewable energy industries who could testify about the resistance of both politicians and the public opinion against the energy transition towards renewable sources. Legal, political, sociological and cultural considerations are put forward to explain this resistance. The French specificity, with an over-representation of nuclear energy, a constraining legal framework for renewable energies, a regional opposition to renewable energy projects (NIMBY syndrome), and a lack of trust in the political class and in its representatives are as many factors that have contributed to build this French 'cultural exception'. (J.S.)

  2. Use of renewable energy sources in Estonia

    International Nuclear Information System (INIS)

    Estonia has made success in the implementation of energy conservation programme and bio fuel programmes. The basis for promoting the use of biofuels and peat are identified in the first National Energy Conservation Programme (approved by the government in 1992) and in the National Long Term Energy Development Programme (approved by the parliament in 1998). The first National Energy Conservation Programme has set up the following goals: reduction of the share of imported fuels in national primary energy balance through implementation of energy conservation projects and through conversion from imported fuels to local fuels (peat and wood); solving the ownership problems of heating enterprises; financial support for implementation of energy conservation and fuel conversion projects; to stop the subsidies of energy tariffs; promotion of energy conservation awareness campaign. The National Long Term Energy Development Programme identified the promotion of the use of biofuels and peat as one of the main tasks of national energy policy. According to the development plan, the share of renewable energy sources in national primary energy balance shall reach the percentage of 13 in the year 2010. The government approved the new National Energy Conservation Programme in January 2000. One part of the programme is the analyses of the results of the first programme. The conclusion is that the main tasks of the first energy conservation programme (from 1992) are fulfilled: the total use of primary energy has decreased from 1991 to 1998 from 390,6 PJ to 214 PJ; the total amount of imported fuels has decreased from 173 PJ in 1991 to 80 PJ in 1998; the total share of peat and wood in primary energy balance has increased from 14,8 TJ in 1991 to 24,3 TJ in 1998. This is from 3,6 % to 11,3 % accordingly. Since the annual growth of peat resources is bigger than the annual consumption, in Estonian conditions, peat could be considered as renewable energy source. The increase of the share

  3. Renewable energy sources and nuclear installations

    International Nuclear Information System (INIS)

    This comprehensive work report for the Swiss Federal Office of Energy (SFOE) made by the Paul Scherrer Institute PSI takes a look at work done in connection with the updating of the office's Energy Perspectives. In particular, the topic of electricity is reviewed in the light of pending important decisions in the area of nuclear energy and the newer renewable sources of energy. The report makes an attempt to estimate the effect on Swiss power production that the new renewables and new nuclear installations could have in the next 30-40 years and to what costs this could be done and which obstacles would have to overcome. The renewable energy sources include small hydro, wind, photovoltaics, solar thermal power plants, biogas, geothermal energy, wave-power and solar chemistry. The methods used include literature study and contacts with internal PSI experts on the various areas involved. The most important system characteristics were noted and learning curves for the various technologies were taken into account. Ecological and social factors were also considered

  4. Conventional versus Alternative Energy Sources and their Economy

    OpenAIRE

    Jirková, Kateřina

    2012-01-01

    The aim of the diploma thesis is to deliver a complex and understandable knowledge about the issue of renewable sources of energy and its comparison to conventional sources of energy. For that reason the first part of this work contains theoretical background about renewable energy: definition of alternative sources of energy and conventional sources of energy, different options of alternative energy, pros and cons of alternative energy, analysis of the situation on the market with alternativ...

  5. Burning plasmas in ITER for energy source

    Energy Technology Data Exchange (ETDEWEB)

    Inoue, Nobuyuki [Atomic Energy Commission, Tokyo (Japan)

    2002-10-01

    Fusion research and development has two aspects. One is an academic research on science and technology, i.e., discovery and understanding of unexpected phenomena and, development of innovative technology, respectively. The other is energy source development to realize fusion as a viable energy future. Fusion research has been made remarkable progress in the past several decades, and ITER will soon realize burning plasma that is essential for both academic research and energy development. With ITER, scientific research on unknown phenomena such as self-organization of the plasma in burning state will become possible and it contributes to create a variety of academic outcome. Fusion researchers will have a responsibility to generate actual energy, and electricity generation immediately after the success of burning plasma control experiment in ITER is the next important step that has to be discussed seriously. (author)

  6. 10 CFR 39.53 - Energy compensation source.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 1 2010-01-01 2010-01-01 false Energy compensation source. 39.53 Section 39.53 Energy NUCLEAR REGULATORY COMMISSION LICENSES AND RADIATION SAFETY REQUIREMENTS FOR WELL LOGGING Equipment § 39.53 Energy compensation source. The licensee may use an energy compensation source (ECS) which...

  7. RENEWABLE ENERGY SOURCES AND THIRD GENERATION UNIVERSITY

    OpenAIRE

    Pavlov, Daniel

    2014-01-01

    Since the beginning of the 21st century, entrepreneurs are able to use the innovations at the universities in order to set up their own business. That collaboration is part of the concept of the “Third Generation University”. The aim of this paper is to outline some possibilities for innovative business development in the Ruse region, Bulgaria that are aimed at supporting technostarters who use biomass for energy production. It describes the need of renewable energy sources in EU context, giv...

  8. Cyanate as energy source for nitrifiers

    OpenAIRE

    Palatinszky, Marton; Herbold, Craig; Jehmlich, Nico; Pogoda, Mario; Han, Ping; von Bergen, Martin; Lagkouvardos, Ilias; Karst, Søren M.; Galushko, Alexander; Koch, Hanna; BERRY, David; Daims, Holger; Wagner, Michael

    2015-01-01

    Ammonia- and nitrite-oxidizers are collectively responsible for the aerobic oxidation of ammonia via nitrite to nitrate and play essential roles for the global biogeochemical nitrogen cycle. The physiology of these nitrifying microbes has been intensively studied since the first experiments of Sergei Winogradsky more than a century ago. Urea and ammonia are the only recognized energy sources that promote the aerobic growth of ammonia-oxidizing bacteria and archaea. Here we report the aerobic ...

  9. Electric Power From Ambient Energy Sources

    Energy Technology Data Exchange (ETDEWEB)

    DeSteese, John G.; Hammerstrom, Donald J.; Schienbein, Lawrence A.

    2000-10-03

    This report summarizes research on opportunities to produce electric power from ambient sources as an alternative to using portable battery packs or hydrocarbon-fueled systems in remote areas. The work was an activity in the Advanced Concepts Project conducted by Pacific Northwest National Laboratory (PNNL) for the Office of Research and Development in the U.S. Department of Energy Office of Nonproliferation and National Security.

  10. Renewable energy sources 1991, part 3

    Science.gov (United States)

    Michalicka, L.

    1991-12-01

    The Fourth International Conference on Renewable Energy Sources was held at Prague Technical University from 1-4 Jul. 1991. Part 3 of the proceedings contains a report on the conference and 10 contributions, of which 2 were inputted in INIS: one deals with the economic problems of wind-, solar- and oil-driven water pumps, the other deals with the decrease in sunshine brought about by the operation of Czechoslovak nuclear power plants.

  11. Renewable energy sources and Estonian national interests

    International Nuclear Information System (INIS)

    There is only one national level document, The Long-term National Development Plan for the Fuel and Energy sector, regulating the development of renewable energy for Estonia. It was approved by the Parliament (Riigikogu) in 1998. This document planned a 2/3 (66,7%) increase in the share of renewable (according to the document: peat, biofuels and other renewables) to the year 2010 against 1996. At the same time a decrease of the share of domestic oil shale was planned 1/5 to the year 2010 against 1995. That means the use of domestic energy sources, both renewable and non-renewable, will decrease by 16,8% altogether. In reality the rapid projected growth of renewables in Estonia (+66,7% between 1996 and 2010) was changed with decrease of 20% by 2000. So the security of supply must shift to the first place in Estonia. It is also an issue of national sovereignty. Estonia is rich in renewable energy sources, mainly in wood, peat and wind, to achieve the goals set in the National Development Plan. Forest resources amount 352,7, total felling 6,44, allowed felling 7,81 million cubic meters solid volume in 2000. The future of fuel peat usage in Estonia is uncertain, as most of the EU member states, which have burned up their peat resources and/or drained their mires do not consider peat as a renewable fuel. Obviously Estonia has to explain its opinion about the renewability of its resources. Although progress is needed in all directions of additional use of all renewable energy sources in tactical consideration finance must be directed first to guarantee better use of wastes of woodworking and timber industry

  12. Cyanate as an energy source for nitrifiers.

    Science.gov (United States)

    Palatinszky, Marton; Herbold, Craig; Jehmlich, Nico; Pogoda, Mario; Han, Ping; von Bergen, Martin; Lagkouvardos, Ilias; Karst, Søren M; Galushko, Alexander; Koch, Hanna; Berry, David; Daims, Holger; Wagner, Michael

    2015-08-01

    Ammonia- and nitrite-oxidizing microorganisms are collectively responsible for the aerobic oxidation of ammonia via nitrite to nitrate and have essential roles in the global biogeochemical nitrogen cycle. The physiology of nitrifiers has been intensively studied, and urea and ammonia are the only recognized energy sources that promote the aerobic growth of ammonia-oxidizing bacteria and archaea. Here we report the aerobic growth of a pure culture of the ammonia-oxidizing thaumarchaeote Nitrososphaera gargensis using cyanate as the sole source of energy and reductant; to our knowledge, the first organism known to do so. Cyanate, a potentially important source of reduced nitrogen in aquatic and terrestrial ecosystems, is converted to ammonium and carbon dioxide in Nitrososphaera gargensis by a cyanase enzyme that is induced upon addition of this compound. Within the cyanase gene family, this cyanase is a member of a distinct clade also containing cyanases of nitrite-oxidizing bacteria of the genus Nitrospira. We demonstrate by co-culture experiments that these nitrite oxidizers supply cyanase-lacking ammonia oxidizers with ammonium from cyanate, which is fully nitrified by this microbial consortium through reciprocal feeding. By screening a comprehensive set of more than 3,000 publically available metagenomes from environmental samples, we reveal that cyanase-encoding genes clustering with the cyanases of these nitrifiers are widespread in the environment. Our results demonstrate an unexpected metabolic versatility of nitrifying microorganisms, and suggest a previously unrecognized importance of cyanate in cycling of nitrogen compounds in the environment.

  13. Biochar As a Renewable Energy Source

    Science.gov (United States)

    Stein, Richard

    2011-11-01

    Biochar is a form of charcoal prepared by heating biomass in limited air. It is porous and has high surface area, maintaining much of the morphology of the biomass. The heat for its preparation arises primarily from burning volatiles emitted upon heating. About half the chemical energy in the biomass is contained in the biochar, about 40% is used for the conversion, and about 10% may be used as a local heat source. The biochar can serve as a soil additive where it acts as a template for the growth of bacteria and fungi which then lead to improved growth of biomass by as much as several hundred percent. It remains inert in the soil for many years. Thus, it sequesters the carbon, originally coming from the carbon dioxide absorbed during the photosynthesis occurring during the growth of the biomass. Its use reduces fertilizer and water needs and to pollution arising from the run-off of fertilizer and emission of noxious vapors. Its use is best done at a local level, close to sources of biomass from farm and forest waste. The Pioneer Valley Biochar Initiative along with the Center of Agriculture of the University of Massachusetts, Amherst is promoting the use of biochar on local farms which reduces their dependence on energy arising from fossil fuel and nuclear sources.

  14. Cyanate as an energy source for nitrifiers.

    Science.gov (United States)

    Palatinszky, Marton; Herbold, Craig; Jehmlich, Nico; Pogoda, Mario; Han, Ping; von Bergen, Martin; Lagkouvardos, Ilias; Karst, Søren M; Galushko, Alexander; Koch, Hanna; Berry, David; Daims, Holger; Wagner, Michael

    2015-08-01

    Ammonia- and nitrite-oxidizing microorganisms are collectively responsible for the aerobic oxidation of ammonia via nitrite to nitrate and have essential roles in the global biogeochemical nitrogen cycle. The physiology of nitrifiers has been intensively studied, and urea and ammonia are the only recognized energy sources that promote the aerobic growth of ammonia-oxidizing bacteria and archaea. Here we report the aerobic growth of a pure culture of the ammonia-oxidizing thaumarchaeote Nitrososphaera gargensis using cyanate as the sole source of energy and reductant; to our knowledge, the first organism known to do so. Cyanate, a potentially important source of reduced nitrogen in aquatic and terrestrial ecosystems, is converted to ammonium and carbon dioxide in Nitrososphaera gargensis by a cyanase enzyme that is induced upon addition of this compound. Within the cyanase gene family, this cyanase is a member of a distinct clade also containing cyanases of nitrite-oxidizing bacteria of the genus Nitrospira. We demonstrate by co-culture experiments that these nitrite oxidizers supply cyanase-lacking ammonia oxidizers with ammonium from cyanate, which is fully nitrified by this microbial consortium through reciprocal feeding. By screening a comprehensive set of more than 3,000 publically available metagenomes from environmental samples, we reveal that cyanase-encoding genes clustering with the cyanases of these nitrifiers are widespread in the environment. Our results demonstrate an unexpected metabolic versatility of nitrifying microorganisms, and suggest a previously unrecognized importance of cyanate in cycling of nitrogen compounds in the environment. PMID:26222031

  15. The Development of Renewable Energy Sources in Turkey

    OpenAIRE

    ÇETİN, ATALAY; Vardar, Ali

    2014-01-01

    Especially in last two decades, most of the developed and developing countries around theworld have been supporting the researches that investigate more clean and sustainable energy sources. Renewable energy sources play more important role in today’s increasingly globalized energy market because of the environmental issues and the sources of fossil fuelare becoming scarce. According to that, as a virtue of the rapidly increase in energy demand, the supply of renewable energy sources are incr...

  16. Radiant Energy Power Source for Jet Aircraft

    Energy Technology Data Exchange (ETDEWEB)

    Doellner, O.L.

    1992-02-01

    This report beings with a historical overview on the origin and early beginnings of Radiant Energy Power Source for Jet Aircraft. The report reviews the work done in Phase I (Grant DE-FG01-82CE-15144) and then gives a discussion of Phase II (Grant DE-FG01-86CE-15301). Included is a reasonably detailed discussion of photovoltaic cells and the research and development needed in this area. The report closes with a historical perspective and summary related to situations historically encountered on projects of this nature. 15 refs.

  17. Photovoltaics as a worldwide energy source

    Energy Technology Data Exchange (ETDEWEB)

    Jones, G.J.

    1991-12-31

    Photovoltaic energy systems have historically been treated as a bulk power generation source for the future. However, utilities and other agencies involved with electrification throughout the world are beginning to find photovoltaics a least-cost option to meet specific loads both for themselves and their customers, in both off-grid and grid-connected applications. These expanding markets offer the potential of hundreds of megawatts of sales in the coming decade, but a strategy addressing both industrial growth and user acceptance is necessary to capitalize on this opportunity. 11 refs.

  18. Energy Recovery Linacs for Light Source Applications

    Energy Technology Data Exchange (ETDEWEB)

    George Neil

    2011-04-01

    Energy Recovery Linacs are being considered for applications in present and future light sources. ERLs take advantage of the continuous operation of superconducting rf cavities to accelerate high average current beams with low losses. The electrons can be directed through bends, undulators, and wigglers for high brightness x ray production. They are then decelerated to low energy, recovering power so as to minimize the required rf drive and electrical draw. When this approach is coupled with advanced continuous wave injectors, very high power, ultra-short electron pulse trains of very high brightness can be achieved. This paper will review the status of worldwide programs and discuss the technology challenges to provide such beams for photon production.

  19. Spherical explosion with central energy source

    CERN Document Server

    Masuyama, Miyu; Tsuboki, Yoichiro

    2015-01-01

    We present a novel semi-analytic solution describing the propagation of a spherical blast wave driven by a central energy source. The initial density profile has a power-law function of the distance from the center and the energy is injected only into the central region at a rate given by a power-law function of time. This solution is composed of three regions separated by the contact surface and the shock front. The innermost region is assumed to be uniform and the outside of the contact surface includes the shocked matter described by self-similar solutions. We analytically derive the applicable range of parameters of this solution from requirements to satisfy boundary conditions. We perform numerical simulations for flows with various values of parameters, some of which reside out of the thus derived applicable range, and compare with the semi-analytic solutions.

  20. Spherical explosion with a central energy source

    Science.gov (United States)

    Masuyama, Miyu; Shigeyama, Toshikazu; Tsuboki, Yoichiro

    2016-04-01

    We present a novel semi-analytic solution that describes the propagation of a spherical blast wave driven by a central energy source. The initial density profile has a power-law function of the distance from the center and the energy is injected only into the central region at a rate given by a power-law function of time. This solution is composed of three regions separated by the contact surface and the shock front. The innermost region is assumed to be uniform and the outside of the contact surface includes the shocked matter described by self-similar solutions. We analytically derive the applicable range of parameters of this solution from requirements needed to satisfy the boundary conditions. We perform numerical simulations for flows with various values of parameters, some of which reside out of the thus-derived applicable range, and compare the results with the semi-analytic solutions.

  1. Outlook for alternative energy sources. [aviation fuels

    Science.gov (United States)

    Card, M. E.

    1980-01-01

    Predictions are made concerning the development of alternative energy sources in the light of the present national energy situation. Particular emphasis is given to the impact of alternative fuels development on aviation fuels. The future outlook for aircraft fuels is that for the near term, there possibly will be no major fuel changes, but minor specification changes may be possible if supplies decrease. In the midterm, a broad cut fuel may be used if current development efforts are successful. As synfuel production levels increase beyond the 1990's there may be some mixtures of petroleum-based and synfuel products with the possibility of some shale distillate and indirect coal liquefaction products near the year 2000.

  2. Status of geothermal energy amongst the world's energy sources

    International Nuclear Information System (INIS)

    The world primary energy consumption is about 400 EJ/year, mostly provided by fossil fuels (80%), The renewables collectively provide 14% of the primary energy, in the form of traditional biomass (10%), large (>10 MW) hydropower stations (2%), and the ''new renewables''(2%). Nuclear energy provides 6%. The World Energy Council expects the world primary energy consumption to have grown by 50-275% in 2050, depending on different scenarios. The renewable energy sources are expected to provide 20-40% of the primary energy in 2050 and 30-80% in 2100. The technical potential of the renewables is estimated at 7600 EJ/year, and thus certainly sufficiently large to meet future world energy requirements. Of the total electricity production from renewables of 2826 TWh in 1998, 92% came from hydropower, 5.5% from biomass, 1.6% from geothermal and 0.6% from wind. Solar electricity contributed 0.05% and tidal 0.02%. The electricity cost is 2-10 UScents/kWh for geothermal and hydro, 5-13 UScents/kWh for wind, 5-15 UScents/kWh for biomass, 25-125 UScents/kWh for solar photovoltaic and 12-18 UScents/kWh for solar thermal electricity. Biomass constitutes 93% of the total direct heat production from renewables, geothermal 5%, and solar heating 2%. Heat production from renewables is commercially competitive with conventional energy sources. Direct heat from biomass costs 1-5 UScents/kWh, geothermal 0.5-5 UScents/kWh, and solar heating 3-20 UScents/kWh. (author)

  3. Microalgae: An Alternative Source of Renewable Energy

    Directory of Open Access Journals (Sweden)

    A. Z. A. Saifullah

    2016-08-01

    Full Text Available This paper presents an overview on the potentiality of microalgae with particular emphasis as a sustainable renewable energy source for biodiesel. One of the most important dilemmas of the modern world is to supply maximal amount of energy with minimal environmental impact. The total energy demand of our planet is increasing with population growth whereas the fossil fuel reserves are dwindling swiftly. Biodiesel produced from biomass is widely considered to be one of the most sustainable alternatives to fossil fuels and a viable means for energy security and environmental and economic sustainability. But as a large area of arable land is required to cultivate biodiesel producing terrestrial plants, it may lead towards food scarcity and deforestation. Microalgae have a number of characteristics that allow the production concepts of biodiesel which are significantly more sustainable than their alternatives. Microalgae possess high biomass productivity, oils with high lipid content, fast growth rates, possibility of utilizing marginal and infertile land, capable of growing in salt water and waste streams, and capable of utilizing solar light and CO2 gas as nutrients.

  4. Cyanate as energy source for nitrifiers

    Science.gov (United States)

    Palatinszky, Marton; Herbold, Craig; Jehmlich, Nico; Pogoda, Mario; Han, Ping; von Bergen, Martin; Lagkouvardos, Ilias; Karst, Søren M.; Galushko, Alexander; Koch, Hanna; Berry, David; Daims, Holger; Wagner, Michael

    2015-01-01

    Ammonia- and nitrite-oxidizers are collectively responsible for the aerobic oxidation of ammonia via nitrite to nitrate and play essential roles for the global biogeochemical nitrogen cycle. The physiology of these nitrifying microbes has been intensively studied since the first experiments of Sergei Winogradsky more than a century ago. Urea and ammonia are the only recognized energy sources that promote the aerobic growth of ammonia-oxidizing bacteria and archaea. Here we report the aerobic growth of a pure culture of the ammonia-oxidizing thaumarchaeote Nitrososphaera gargensis1 on cyanate as the sole source of energy and reductant, the first organism known to do so. Cyanate, which is a potentially important source of reduced nitrogen in aquatic and terrestrial ecosystems2, is converted to ammonium and CO2 by this archaeon using a cyanase that is induced upon addition of this compound. Within the cyanase gene family, this cyanase is a member of a distinct clade that also contains cyanases of nitrite-oxidizing bacteria of the genus Nitrospira. We demonstrate by co-culture experiments that these nitrite-oxidizers supply ammonia-oxidizers lacking cyanase with ammonium from cyanate, which is fully nitrified by this consortium through reciprocal feeding. Screening of a comprehensive set of more than 3,000 publically available metagenomes from environmental samples revealed that cyanase-encoding genes clustering with the cyanases of these nitrifiers are widespread in the environment. Our results demonstrate an unexpected metabolic versatility of nitrifying microbes and suggest a previously unrecognized importance of cyanate for N-cycling in the environment. PMID:26222031

  5. 46 CFR 111.10-5 - Multiple energy sources.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Multiple energy sources. 111.10-5 Section 111.10-5...-GENERAL REQUIREMENTS Power Supply § 111.10-5 Multiple energy sources. Failure of any single generating set energy source such as a boiler, diesel, gas turbine, or steam turbine must not cause all generating...

  6. Positive and Negative Impacts of Renewable Energy Sources

    OpenAIRE

    Vezmar, Stanislav; Spajić, Anton; Topić, Danijel; Šljivac, Damir; JOZSA, Lajos

    2014-01-01

    In this paper, positive and negative impacts of renewable energy sources are presented. Impacts of solar power, biomass power, fuel cells, hydro power, wind power and geothermal power are described. Ecological, social and political impacts of different renewable energy sources are described. Impacts of power plants using different renewable energy sources on the power grid are also described.

  7. SO2 - An indirect source of energy

    DEFF Research Database (Denmark)

    Kriek, R.J.; Van Ravenswaay, J.P.; Potgieter, M.;

    2013-01-01

    Global sulphur dioxide (SO2) emissions peaked around the mid- 1970s, after which they declined. However, with the growth of specifically China, emissions are on the rise again. In 2008, global anthropogenic SO2 emissions totalled 127 Mt, with energy production accounting for 63.2 Mt and metal......-related processes 12.8 Mt. As a well-known gaseous pollutant, SO2 is not per se known as a source of energy. However, in the presence of water SO2 can be electro-oxidized at the anode of an electrolyser to produce hydrogen ions, which in turn can be reduced at the cathode of the electrolyser to produce hydrogen gas....... Gaseous emissions of SO2 can therefore be cleaned up with the simultaneous production of hydrogen, an energy store or carrier, which provides an economic offset to the overall cost of this potential remediation process. This process forms part of the Hybrid Sulfur (HyS) cycle as well as the once...

  8. Target technology of high energy neutron source

    International Nuclear Information System (INIS)

    As a facility of high energy neutron source for materials research and development, Fusion Materials Irradiation Test Facility (FMIT) is a strong candidate. The FMIT is designed to study the irradiation effect of fusion neutron on a fusion reactor materials. The FMIT generates a high-flux, high-energy neutron, which is produced in a stripping reaction by impinging a 3.5 MeV-0.1A beam of deuterons on a flowing lithium target. Target technology obtained in the FMIT will be useful for Energy Selective Neutron Irradiation Test Facility (ESNIT) and IFMIF of D-Li stripping reaction facility. In the first report (I), the flowing lithium target of the FMIT was reviewed, and some technical considerations in design were pointed out. In the second report (II), the target assembly and target material were proposed as the option of the HEDEL reference design of FMIT in order to improve the hazard and economy for the Li system: Firstly, the exchangeable target back wall and the measures to minimize the outside device damage in case of back wall breaking, and secondly, the option of molten fluoride salt as target material were proposed. (M.T.)

  9. Energy efficiency and renewable energy sources in Nordic homes

    Energy Technology Data Exchange (ETDEWEB)

    Hyysalo, S.; Rinkinen, J. [Aalto Univ. School of Economics, Helsinki (Finland). Dept. of Management and International Business; Heiskanen, E. [National Consumer Research Centre, Helsinki (Finland)

    2011-07-01

    The role of citizens as innovators, adaptors of existing technologies and diffusers of new climate-relevant innovations has been studied extensively in recent years. Since the late 1970s, sociological and demographic research on residential energy use has consistently found great variations in energy use among similar households. It has been suggested that these variations constitute a source of innovative low-carbon practices. Yet, while there are many generic technologies available for end-use efficiency and renewables, their slow rate of diffusion suggests that they are not as such applicable to local conditions. Citizens have a key role in their adoption and adaptation to local conditions, as well in their diffusion to other users. Against this backdrop, the track 4 of NCF called for poster presentations of innovative new products, modifications of existing products, news ways of make use of existing technologies as well as such living practices that reduce energy use or enable the utilization of renewable energy sources in domestic settings in the Nordic countries. (orig.)

  10. New renewable energy sources; Nye fornybare energikilder. Revidert utgave 2001

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-06-01

    This publication presents a review of the technological, economical and market status in the field of new renewable energy sources. It also deals briefly with the present use of energy, external conditions for new renewable energy sources and prospects for these energy sources in a future energy system. The renewable energy sources treated here are ''new'' in the sense that hydroelectric energy technology is excluded, being fully developed commercially. This publication updates a previous version, which was published in 1996. The main sections are: (1) Introduction, (2) Solar energy, (3) Bio energy, (4) Wind power, (5) Energy from the sea, (6) Hydrogen, (7) Other new renewable energy technologies and (8) New renewables in the energy system of the future.

  11. Economic impulses to the implementation of alternative energy sources

    International Nuclear Information System (INIS)

    The factors are considered of macroeconomic regulation and microeconomic incentives of the implementation of alternative energy sources in condition of prevailing utilization of conventional energy sources. The analysis concludes that both state regulation and microeconomic incentives shift a time horizon of effective implementation of alternative sources nearer to the present. (author) 6 figs

  12. The Development of Renewable Energy Sources in Turkey

    Directory of Open Access Journals (Sweden)

    Atalay ÇETİN

    2014-10-01

    Full Text Available Especially in last two decades, most of the developed and developing countries around theworld have been supporting the researches that investigate more clean and sustainable energy sources. Renewable energy sources play more important role in today’s increasingly globalized energy market because of the environmental issues and the sources of fossil fuelare becoming scarce. According to that, as a virtue of the rapidly increase in energy demand, the supply of renewable energy sources are increasingly continue around theworld. As a matter of fact, when it is compared to the 2011 rates, the consumption rate of hydro-electricity and other renewable energy sources has increased to 4.3% and % 15.2 respectively in 2012 in the world, is verifying that view.The aim of this study is to investigate the present potential and sufficiency of the main sources of renewable energy such as solar, wind, hydropower, geothermal andbiomass at Turkey. In this regard, even Turkey has a remarkable potential especially in hydro, wind, solar and geothermal energies among Europe, renewable energy sources ratio in Turkey’s total energy consumption is not rising at desired level. Furthermore becauseTurkey hasn’t got a rich fossil fuel reserves, it needs to import fossil energy sources to meet its rapidly growing energy needs. In related to this, Turkey’s current deficit has beengrowing due to the increase in fossil fuel sources prices at international energy markets. On the other side Turkey’s Green House Gases (GHGs emission has grown more thantwo times as a result of its rapidly using of fossil fuel sources due to its growing economy, industrialization and urbanization process since 1990. Within this context, as a foreigndependent country on fossil fuel energy sources (especially on crude oil and natural gas, Turkey should rapidly change its energy policy from fossil fuels to renewable energysources which are domestic, clean and much more cheaper

  13. Effective Land Use for Renewable Energy Sources

    OpenAIRE

    Dijkman, Teunis

    2009-01-01

    The aim of this research is to determine the energy densities for different methods to produce renew-able energy. Energy density is defined here as the energy that is annually produced on a certain area. Using low, average, and high energy density scenari

  14. Domestic energy sources urged as Middle East situation heats up

    International Nuclear Information System (INIS)

    This article discusses the alternatives to foreign oil as an energy source for the US in the light of the invasion of Kuwait by Iraq. Topics addressed include the responses of organizations representing various energy sources, the public response of the Department of Energy, the response of conservation advocates, and the Administration's reaction

  15. 47 CFR 80.1099 - Ship sources of energy.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Ship sources of energy. 80.1099 Section 80.1099... Stations § 80.1099 Ship sources of energy. (a) There must be available at all times, while the ship is at sea, a supply of electrical energy sufficient to operate the radio installations and to charge...

  16. Investigation of Solar and Solar-Gas Thermal Energy Sources

    Directory of Open Access Journals (Sweden)

    Jan Zupa

    2003-01-01

    Full Text Available The article deals with the investigation of solar thermal sources of electrical and heat energy as well as the investigation of hybrid solar-gas thermal sources of electrical and heat energy (so called photothermal sources. Photothermal sources presented here utilize computer-controlled injection of the conversion fluid into special capillary porous substance that is adjusted to direct temperature treatment by the concentrated thermal radiation absorption.

  17. Investigation of Solar and Solar-Gas Thermal Energy Sources

    OpenAIRE

    Jan Zupa; Ivan Herec

    2003-01-01

    The article deals with the investigation of solar thermal sources of electrical and heat energy as well as the investigation of hybrid solar-gas thermal sources of electrical and heat energy (so called photothermal sources). Photothermal sources presented here utilize computer-controlled injection of the conversion fluid into special capillary porous substance that is adjusted to direct temperature treatment by the concentrated thermal radiation absorption.

  18. Environmental problems connected to the use of renewable energy sources

    International Nuclear Information System (INIS)

    The development of FER (renewable energy sources) can represent a fundamental answer to the growing energy need and the requirement for a new environmental quality. Also the renewable sources, however, have an environmental cost, whose amount can be considered of little importance at a world balance, but can have a large impact at a local level. Among FER the author has chosen hydroelectric source, biomass and wind energy, since they are most effective according to the aims of this discussion

  19. The renewable energies sources in France 1970-2000

    International Nuclear Information System (INIS)

    The objective of this report is to describe the energy production from renewable sources in France since 1970. In France the rate of using renewable energy sources is unequal. Some of them as hydro energy show a confirmed industrial and commercial interest when other techniques have not still reach the same level of maturity. The renewable energy sources chosen to calculate the electric and thermal production of France are: for electric power, hydro energy, wind energy, solar energy, geothermal energy, the urban wastes, the wood wastes, the harvesting residues, the biogas. For the thermal production, the thermal solar energy, the geothermal energy, the urban wastes, the wood and wood wastes, the harvesting residues, the biogas and bio fuels. The figures are marked in thirty tables. (N.C.)

  20. Use of regenerative energy sources and hydrogen technology 2006. Proceedings

    International Nuclear Information System (INIS)

    This volume contains 25 contributions, which were held on the 13th symposium ''Use of regenerative energy sources and hydrogen technology'' in Stralsund (Germany). Separate documentation items analysing 16 of the contributions have been prepared for the ENERGY database

  1. Geothermal energy resource: an alternative to energy source in Kenya

    Energy Technology Data Exchange (ETDEWEB)

    Ogala, J.S. [Nairobi Univ., Faculty of Science, Nairobi (Kenya)

    1999-07-01

    Kenya energy potential lies in the use of geothermal resources. Currently the country relies heavily on imported petroleum fuels and biomass. Electricity is derived from hydropower which is currently 570 MW with an additional 30MW imported from Uganda; thermal 136MW and geothermal 45MW. Geothermal potential in Kenya currently stands at 2000MW. Other potential areas include Suswa, Longonot, Menengai, Korosi, Paka, Silai, Emurungogolak, Namarunu, Barrier and Homa Hill. Geothermal exploration is taking place at Olkaria, Eburru and L. Bogoria, all in the Kenya rift valley. Other potential areas include the Nyanza rift. Exploitation of this potential would meet the current and future electricity needs of the country. Geothermal resources is a relatively environmentally friendly source of energy. The technology of production is well developed to minimise gas and water vapour emissions into the atmosphere. For example, at Olkaria Geothermal Station, the production system has a cooling tower where hot water steam mixture is cooled. Only 5% of the water, representing 70% of the condensed steam is lost from the cooling tower through evaporation. The cooled water, at a temperature of 23degC is injected back into the well for the recharge of the steam reservoir. (Author)

  2. On the global and regional potential of renewable energy sources

    NARCIS (Netherlands)

    Hoogwijk, Monique Maria

    2004-01-01

    In this thesis, the central research question is: what can be the contribution of renewable energy sources to the present and future world and regional energy supply system. The focus is on wind, solar PV and biomass energy (energy crops) for electricity generation. For the assessment of the economi

  3. Hydropower and biomass as renewable energy sources in Turkey

    International Nuclear Information System (INIS)

    When talking about renewable energy sources today, the most important and economical energy sources for Turkey are hydropower and biomass.The present study gives a review of production, consumption, and economics of hydropower and biomass as renewable energy sources in Turkey. Turkey has a total gross hydropower potential of 433 GW, but only 125 GW of the total hydroelectric potential of Turkey can be economically used. By the commissioning of new hydropower plants, which are under construction, 36% of the economically usable potential of the country could be tapped. On the other hand, biomass (wood and wastes) energy is the second most important renewable energy source for Turkey. However, the biomass energy sources of Turkey are limited. In 1998, the biomass share of the total energy consumption of the country is 10%. In this study, the potential of important biomass energy sources and animal solid wastes of the country were determined. The effects of hydropower and biomass usage on the environment were also discussed. Considering total cereal products and fatty seed plants, approximately 50-60 million tons per year of biomass and 8-10 million tons of solid matter animal waste are produced, and 70% of total biomass is seen as being usable for energy. Some useful suggestions and recommendations are also presented. The present study shows that there is an important potential for hydropower and biomass energy sources in Turkey. (author)

  4. Can renewable energy sources satiate Slovakia's future energy needs?

    Energy Technology Data Exchange (ETDEWEB)

    Tomis, Igor; Koval, Peter; Janicek, Frantisek; Darula, Ivan

    2010-09-15

    The paper examines the options for replacing the current energy mix of non-renewable, conventional energy sources solely with renewable sources in the long term within the context of the Slovak environment, possibly combined with nuclear energy in the 50-year horizon. Vital needs are outlined in household energy consumption and energy consumption for industrial and transportation purposes to fulfil in order for Slovakia to become independent of foreign sources in energy supplies.

  5. ANALYSIS OF THE PROSPECTS OF SOLAR ENERGY AND OTHER ALTERNATIVE ENERGY SOURCES IN UKRAINE

    OpenAIRE

    Mogylko, O.

    2010-01-01

    The need to develop an alternative energy sources in Ukraine to increase energy efficiency and energy security it is explained in the article. The international experience of development of solar energy are analyzed. The prospects and other alternative energy sources in Ukraine are defined. The conclusions and recommendations to address the problems are identified.

  6. On the Dynamics of Competing Energy Sources

    OpenAIRE

    Tsur, Yacov; Zemel, Amos

    2009-01-01

    We characterize the dynamics of energy markets in which energy is derived from polluting (fossil) and clean (solar) resources. The analysis is based on geometric optimal control considerations. An important feature of solar energy technologies is that their cost of supply is predominantly due to upfront investment in capital infrastructure (rather than to actual supply rate) and this feature has important implications for the market allocation outcome. In particular, it gives rise to a thresh...

  7. RENEWABLE ENERGY SOURCES IN POLAND - CONDITIONS AND POSSIBILITES OF DEVELOPMENT

    Energy Technology Data Exchange (ETDEWEB)

    Gawlik, L.; Mokrzycki, E.; Ney, R.

    2007-07-01

    The paper describes the state of the art in renewable energy sources development. The obligation resulting from the membership of Poland in the European Union as well as from other international agreements in the scope of renewable energy sources development are described. The production of electricity, heat and biofuels in Poland is given and the perspectives of development of particular renewable energy sources in Poland are discussed in the view of potential reserves and other constrains. The economic aspects of renewable energy technologies are shown. The environmental pros and cons of biomass energy development are described. Arguments for development of renewable energy sources use are stated: the decrease of dependence from primary energy sources, the decrease the emission of green house gases and the recovery of agricultural regions of the country. In conclusion it is stated that the significance of renewable energy sources in Polish conditions is constrained to local societies. Their development should be adjusted to conditions predominating in a given region and that wider consumption of renewable energy sources should develop in conformity with sustainable development, so it is necessary to reach agreement between local societies, institutions dealing with environment protection and representatives of power sector. (auth)

  8. A Flexible Power Electronics Configuration for Coupling Renewable Energy Sources

    OpenAIRE

    Mattia Filippini; Marta Molinas; Eneko Olea Oregi

    2015-01-01

    A combination of series, parallel and multilevel power electronics has been investigated as a potential interface for two different types of renewable energy sources and in order to reach higher power levels. Renewable energy sources are typically dispersed in a territory, and sources, like wind and solar, allow small to medium-scale generation of electricity. The configuration investigated in this article aims at adapting the coupling solution to the specific generation characteristics of th...

  9. The Effects of Renewable Portfolio Standards on Renewable Energy Sources

    OpenAIRE

    Ohler, Adrienne

    2007-01-01

    Renewable Portfolio Standard (RPS) programs have experienced increased popularity at the state level with twenty-three states adopting policies. Policy makers implement these programs in the hopes of stimulating renewable energy generation and lessening the states reliance on nonrenewable sources, by requiring utility companies to provide a specified amount of electricity from renewable sources. I examine the use of renewable energy sources caused by the implementation of these programs, and ...

  10. Intermediate energy light sources and the SSRF project

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Advances in insertion device technology, top-up operation and superconducting RF cavities make it possible to generate high brightness X-ray with intermediate energy light sources, which leads a new trend in designing and constructing third generation light sources around the world. The development status and the remarkable technical features of intermediate energy light sources are reviewed, and the main SSRF properties are described in this paper.

  11. The development of renewable energy sources must change its scale.

    International Nuclear Information System (INIS)

    The French orientation law on energy should be adopted very soon. It fixes ambitious objectives to develop renewable energy sources, in particular a 50% increase of the renewable heat by 2010. Despite an evident acceleration in the development of these energy sources, the path remains long before reaching the orientation law and Kyoto protocol objectives. In particular, several brakes remain to be released for the development of collective facilities (renewable heat networks). This article presents the objectives of the French government in terms of renewable energy sources development (solar thermal and photovoltaic, wood fueled and cogeneration systems) and the problems encountered so far in the implementation of this policy. (J.S.)

  12. Use of non-conventional energy sources for power generation

    International Nuclear Information System (INIS)

    India being a developing country, cannot afford to meet the power and energy demand only from conventional sources. Power generation can be augmented by using non-conventional energy sources. Sufficient importance must be given for recovery of energy from industrial/urban waste. Solar heating system must replace industrial and domestic sectors. Solar photovoltaic, biogas plant, biomass based gasified system must also be given sufficient place in energy sector. More thrust has to be given for generation of power by using sugar cane which is a perennial source

  13. Does willingness to pay for green energy differ by source?

    Energy Technology Data Exchange (ETDEWEB)

    Borchers, Allison M.; Duke, Joshua M. [University of Delaware, Newark, DE (United States). Department of Food and Resource Economics; Parsons, George R. [University of Delaware, Newark, DE (United States). College of Marine and Earth Sciences and Department of Economics

    2007-06-15

    We present the findings of a choice experiment designed to estimate consumer preferences and willingness-to-pay (WTP) for voluntary participation in green energy electricity programs. Our model estimates WTP for a generic ''green energy'' source and compares it to WTP for green energy from specific sources, including wind, solar, farm methane, and biomass. Our results show that there exists a positive WTP for green energy electricity. Further, individuals have a preference for solar over a generic green and wind. Biomass and farm methane are found to be the least preferred sources. (author)

  14. Environmental benefit from renewable energy sources

    International Nuclear Information System (INIS)

    In this paper a comparative environmental analysis on the electricity production between wind energy system and coal power plant has been made. The methodologies used are the LCA and the Impact Patway Analysis (IPA) - a recent tool to assess the externalities of the energy systems. Both methodologies, even if in different amount, show a remarkable convenience in the production of electricity from wind systems

  15. Hybrid energy sources for electric and fuel cell vehicle propulsion

    OpenAIRE

    Schofield, N; Yap, H T; Bingham, Chris

    2005-01-01

    Given the energy (and hence range) and performance limitations of electro-chemical batteries, hybrid systems combining energy and power dense storage technologies have been proposed for electric vehicle propulsion. The paper will discuss the application of electro-chemical batteries, supercapacitors and fuel cells in single and hybrid source configurations for electric vehicle drive-train applications. Simulation models of energy sources are presented and used to investigate the design optimi...

  16. Biogas : Animal Waste That Can be Alternative Energy Source

    OpenAIRE

    Tuti Haryati

    2006-01-01

    Biogas is a renewable energy which can be used as alternative fuel to replace fossil fuel such as oil and natural gas . Recently, diversification on the use of energy has increasingly become an important issue because the oil sources are depleting . Utilization of agricultural wastes for biogas production can minimize the consumption of commercial energy source such as kerosene as well as the use of firewood . Biogas is generated by the process of organic material digestion by certain anaerob...

  17. Decarbonizing electricity generation with intermittent sources of energy

    OpenAIRE

    Ambec, Stefan; Crampes, Claude

    2015-01-01

    We examine the impact of public policies that aim to decarbonate electricity production by replacing fossil fuel energy by intermittent renewable sources, namely wind and solar power. We consider a model of energy investment and production with two sources of energy: one is clean but intermittent (e.g. wind), whereas the other one is reliable but polluting (e.g. coal). A carbon tax decreases electricity production while simultaneously increasing investment in wind power. This tax may however ...

  18. Barriers for renewable energy sources development in Poland on the example of wind energy

    International Nuclear Information System (INIS)

    Development of Renewable Energy Sources (RES) is one of main priorities of energy policy in Poland. Wind energy is one of the most dynamically developing sectors within renewable energy segment. The installed capacity of wind installations in Poland in 2014 was twice as big as in 2010. Despite such a dynamic growth, wind energy sector constantly faces obstacles of various kind in its development. The article presents the current state, barriers and development perspectives of wind energy in Poland and its share in the renewable energy sources sector. Key words: Poland, Renewable Energy Sources, wind energy, electricity

  19. Imaging of granular sources in high energy heavy ion collisions

    OpenAIRE

    Yang, Zhi-Tao; Zhang, Wei-Ning; Huo, Lei; Zhang, Jing-Bo

    2008-01-01

    We investigate the source imaging for a granular pion-emitting source model in high energy heavy ion collisions. The two-pion source functions of the granular sources exhibit a two-tiered structure. Using a parametrized formula of granular two-pion source function, we examine the two-tiered structure of the source functions for the imaging data of Au+Au collisions at Alternating Gradient Synchrotron (AGS) and Relativistic Heavy Ion Collider (RHIC). We find that the imaging technique introduce...

  20. Comparing nuclear power with other energy sources

    International Nuclear Information System (INIS)

    The economics of electric generation of nuclear, hydro, oil and gas origin are compared. A similar comparison is also made from the health and environment standpoint for the fossil, nuclear, solar and wind generation. A risk assessment for energies of different origin is outlined and the significance of the greenhouse effect is emphasised. A comprehensive economic and environmental evaluation is recommended for the energy planning

  1. Energy Harvesting from Hydraulic and Vibration Sources

    OpenAIRE

    Mohammad pour, Nima

    2014-01-01

    This doctoral thesis, is divided in two main parts. The former is about load optimisation for a hydraulic energy harvester while the latter focuses on the design and fabrication of piezoelectric energy harvesters for the single supply pre-biasing circuit. An abstract for each part is reported below: � Part I: The hydraulic power available in water pipes is usually wasted while it could be harvested and used to supply low power systems. To address this shortcoming, this study presents how load...

  2. A new energy source originating from extra dimensions

    Institute of Scientific and Technical Information of China (English)

    Tao Bi-Xiu; Ji Shi-Yin; Li Fang-Qiong

    2004-01-01

    In this work the Einstein gravitational field equations and the Lichnerowicz boundary formalism in the extra dimensions are used to build up our black hole model from 6-dimensional space-time. From the internal stress-energy tensor the solutions with energy levels and semiclassical space-quantization are obtained, which combines with only one metric condition outside the defect. We show a new type of energy source, which originates from extra dimensions. A part of the energy source of quasi-stellar object (QSO) maybe come from extra dimensions in that way. The theoretical arithmetic upper limit is identical to that of the output energy of QSO.

  3. Prospective energy sources and their comparison with current supplies

    Science.gov (United States)

    Voitsekhovskii, B. V.

    1980-10-01

    The comparative physical-technical and economic characteristics of renewable energy sources are analyzed. The significant advantages of wind energy for future use over oil, gas, and coal are demonstrated. Costs of wind electrical energy are compared in the U.S., Denmark, and the U.S.S.R.

  4. Comparison of prospective energy sources with those in use

    Science.gov (United States)

    Voitsekhovskii, B. V.

    1981-03-01

    The comparative physical-technical and economic characteristics of renewable energy sources are analyzed. The significant advantages of wind energy for future use over oil, gas, and coal are demonstrated. Costs of wind electrical energy are compared in the U.S., Denmark, and the U.S.S.R.

  5. ALGAE AS AN ALTERNATIVE SOURCE OF ENERGY

    OpenAIRE

    Тітлова, О.А.

    2015-01-01

    Today humanity is beginning to understand the consequences of ill-considered use of energy resources. In the last decade  a new direction of the economy is actively developing – «The Blue Economy». Its aim is to find innovative solutions that are safe for the environment and society. Bioenergy is one of the directions of the «Blue Economy» which is actively developing lately. The article discusses the possibility, advisability and examples of the algae use as a feedstock for the energy resour...

  6. Ethanol as an alternative source of energy

    International Nuclear Information System (INIS)

    Pakistan, at present facades huge shortage of energy that has disabled several industries and has worsened the living standards of a common man. Its economy mainly depends upon agriculture but relies heavily on imported petroleum to meet the necessities. The importance of national resources as an alternative energy resource is thus greatly felt. The sugar cane industry of Pakistan holds a potential to provide such an alternative fuel as bio ethanol that can be produced entirely from molasses. This paper looks deeper into scope of ethanol as one replacement that can reduce the financial and environmental cost of petroleum based fuels. (author)

  7. Essentials of energy technology sources, transport, storage, conservation

    CERN Document Server

    Fricke, Jochen

    2013-01-01

    An in-depth understanding of energy technology, sources, conversion, storage, transport and conservation is crucial for developing a sustainable and economically viable energy infrastructure. This need, for example, is addressed in university courses with a special focus on the energy mix of renewable and depletable energy resources. Energy makes our lives comfortable, and the existence of amenities such as heaters, cars, warm water, household appliances and electrical light is characteristic for a developed economy. Supplying the industrial or individual energy consumer with energy 24 hours

  8. Environmental impacts evaluation associated to renewable sources of energy

    International Nuclear Information System (INIS)

    As time goes by, the need for electricity increases and creates several problems to mankind. Health and environmental problems happens wherever a power plant arises. For many people the best option for these problems is to invest in energy alternative sources, such as solar and wind. But unfortunately this sources also generates some environmental and health damages. The objective of this work is to analyze the impacts of these energy sources, to review their utilization all over the world and to discuss its relevance in the global energy market. To make a comparative evaluation, the nuclear option will also be analyzed. (author)

  9. Phenomenology of extragalactic high energy sources

    International Nuclear Information System (INIS)

    The course is divided in two main bodies: Chapters 1 and 2 deal with some of the fundamental properties of the production of high energy radiation, while chapter 3 is devoted to the observations of active galaxies; chapter 4 presents the X-ray emission of clusters of galaxies and the sky background

  10. Marketing of renewable energy sources in the region

    International Nuclear Information System (INIS)

    European Union has a leading role in the world due to its strong commitment to increase renewable energy sources as for the energy system change. Success of such long term project requires first of all a stable political framework, well-tailored support system of finances, technical background and administrative, and by this way it can overcome the obstacles existing in distorted energy markets. Regardless their high potential, renewable energy resources are insufficiently exploited in Europe. The aim of the contribution is to bring characteristic of particular sources of energy and technologies of exploitation in the geographic area Hnilec valley. We obtained detailed summary of positive and negative aspects and the reason of further survey in this field. Overall result of the thesis is the complex of knowledge of possibility of exploitation of sustainable sources of the energy in the region Hnilec valley and determination of the best possible variant of it. (authors)

  11. Energy-Efficient Sensing and Communication of Parallel Gaussian Sources

    CERN Document Server

    Liu, Xi; Erkip, Elza

    2012-01-01

    Energy efficiency is a key requirement in the design of wireless sensor networks. While most theoretical studies only account for the energy requirements of communication, the sensing process, which includes measurements and compression, can also consume comparable energy. In this paper, the problem of sensing and communicating parallel sources is studied by accounting for the cost of both communication and sensing. In the first formulation of the problem, the sensor has a separate energy budget for sensing and a rate budget for communication, while, in the second, it has a single energy budget for both tasks. Assuming that sources with larger variances have lower sensing costs, the optimal allocation of sensing energy and rate that minimizes the overall distortion is derived for the first problem. Moreover, structural results on the solution of the second problem are derived under the assumption that the sources with larger variances are transmitted on channels with lower noise. Closed-form solutions are als...

  12. Resource management tools based on renewable energy sources

    Science.gov (United States)

    Jannson, Tomasz; Forrester, Thomas; Boghrat, Pedram; Pradhan, Ranjit; Kostrzewski, Andrew

    2012-06-01

    Renewable energy is an important source of power for unattended sensors (ground, sea, air), tagging systems, and other remote platforms for Homeland Security and Homeland Defense. Also, Command, Control, Communication, and Intelligence (C3I) systems and technologies often require renewable energy sources for information assurance (IA), in general, and anti-tampering (AT), in particular. However, various geophysical and environmental conditions determine different types of energy harvesting: solar, thermal, vibration, acoustic, hydraulic, wind, and others. Among them, solar energy is usually preferable, but, both a solar habitat and the necessity for night operation can create a need for other types of renewable energy. In this paper, we introduce figures of merit (FoMs) for evaluating preferences of specific energy sources, as resource management tools, based on geophysical conditions. Also, Battery Systemic Modeling is discussed.

  13. Future prospects for renewable energy sources in a global frame

    International Nuclear Information System (INIS)

    The objective of this study has been to evaluate the possibilities of some new energy sources (solar, wind) in the future world energy supply. We intend to prepare future projections accounting for limitations in infrastructure, time and material inputs. One underlying assumption in the analyses is that new technologies will see an early market introduction in the near future which would continue up to year 2020. During these 30 years, there will still be technological developments leading to a much better manufacturability, mass production, and hence reduced costs. In year 2020, the industrial and economic infrastructure of new energy sources would be mature for a major penetration into the world energy market starting to substitute existing energy sources mainly for environmental reasons. This scenario will be suported by more factual information and data in the following chapters. Each new energy technology will be handled separately. (Quittner)

  14. Analysis of Different Methods for Computing Source Energy in the Context of Zero Energy Buildings

    Energy Technology Data Exchange (ETDEWEB)

    Torcellini, Paul A.; Bonnema, Eric; Goldwasser, David; Pless, Shanti

    2016-08-26

    Building energy consumption can only be measured at the site or at the point of utility interconnection with a building. Often, to evaluate the total energy impact, this site-based energy consumption is translated into source energy, that is, the energy at the point of fuel extraction. Consistent with this approach, the U.S. Department of Energy's (DOE) definition of zero energy buildings uses source energy as the metric to account for energy losses from the extraction, transformation, and delivery of energy. Other organizations, as well, use source energy to characterize the energy impacts. Four methods of making the conversion from site energy to source energy were investigated in the context of the DOE definition of zero energy buildings. These methods were evaluated based on three guiding principles--improve energy efficiency, reduce and stabilize power demand, and use power from nonrenewable energy sources as efficiently as possible. This study examines relative trends between strategies as they are implemented on very low-energy buildings to achieve zero energy. A typical office building was modeled and variations to this model performed. The photovoltaic output that was required to create a zero energy building was calculated. Trends were examined with these variations to study the impacts of the calculation method on the building's ability to achieve zero energy status. The paper will highlight the different methods and give conclusions on the advantages and disadvantages of the methods studied.

  15. Cyanate as energy source for nitrifiers

    DEFF Research Database (Denmark)

    Palatinszky, Marton; Herbold, Craig; Jehmlich, Nico;

    2015-01-01

    Ammonia- and nitrite-oxidizing microorganisms are collectively responsible for the aerobic oxidation of ammonia via nitrite to nitrate and have essential roles in the global biogeochemical nitrogen cycle. The physiology of nitrifiers has been intensively studied, and urea and ammonia are the only...... organism known to do so. Cyanate, a potentially important source of reduced nitrogen in aquatic and terrestrial ecosystems2, is converted to ammonium and carbon dioxide in Nitrososphaera gargensis by a cyanase enzyme that is induced upon addition of this compound. Within the cyanase gene family...

  16. Prospects of renewable-energy sources in Pakistan

    International Nuclear Information System (INIS)

    Pakistan, despite the enormous potential of its energy resources, remains energy- deficient and has to rely heavily on imports to satisfy its needs. Moreover, a very large part of the rural areas does not have the electrification facilities, because they are either too remote and/or too expensive to connect to the national grid. Pakistan obtains its energy requirements from a variety of traditional and commercial sources. Share of various primary energy-sources in energy-supply mix remained during last few years as oil: 43.5%, gas: 41.5%, LPG: 0.3%, coal: 4.5%, hydro-electricity: 9.2%, and nuclear electricity: 1.1%. The electric-power generation included 71.9% thermal, 25.2% hydel and 2.9% nuclear. While there is no prospect for Pakistan to reach self-sufficiency in hydrocarbons, a good option is the exploitation and utilization of the huge coal-reserves of Thar and the other renewable energy sources. Pakistan has wide spectrum of high potential renewable energy sources, conventional as well as non-conventional, which have not been adequately explored, exploited and developed. 'Thus, the primary energy supplies today are not enough to meet even the present demand. So, Pakistan, like other developing countries of the region, is facing a serious challenge of energy deficit. The development of the renewable energy sources can play an important role in meeting this challenge. Present observations, based on reviewing the geological setup, geographical position, climatological cycles and the agricultural/industrial/ urbanization activities, reveal that there are bright prospects for the exploitation of various renewable-energy sources, which include mega and macro/micro-hydel, biomass, biogas, wind, solar, co-generation, city and other solid wastes, utilization of low-head canal levels, sea wave and tide and geothermal energies etc. Technologically, all these renewable-energy sources are viable and consequently suited to efforts for poverty alleviation and cleaner

  17. A problem of stand-off energy sources for MTF

    Energy Technology Data Exchange (ETDEWEB)

    Ryutov, D D

    1999-04-09

    Fusion devices based on the adiabatic (or shock) compression of the plasma by electromagnetically driven liner need specific energy sources capable of delivering a high current (~10 MA) in the pulses 0.1 - 1 microsecond long. In the present experimental facilities, the plasma load is situated very close to the pulse-power energy source. In the future fusion devices, one would have to place a plasma load at a considerable distance from the energy source (to avoid strong neutron and thermo-mechanical damage to the source). Several versions of the stand-off energy sources are considered. All are based on the idea of an "assembly" - an object where the plasma load is nested and which contains all necessary circuitry that allows conversion of the energy delivered to the assembly into the magnetic energy. Such "assemblies" will be dropped (or inserted) into the reaction chamber at a desired rate and energized by a stand-off energy source. Four specific concepts have been mentioned.

  18. Legislation on renewable energy sources in Central America

    International Nuclear Information System (INIS)

    This paper presents the development of renewable energy in Central America and the cooperation given by the European Comission in the promotion of renewable energy sources. Also discuss the current situation in energy demand in Central America and possible solutions linked to legislation that promotes the inversion of the private sector. The legal framework in each country of Central America is presented and its impact in the increasing of generation of energy through tax reductions, trading and prices

  19. ENEGY FORESTRY A SOURCE OF ENERGY FOR THE ROMANIAN ECONOMY

    OpenAIRE

    Margareta RUSU

    2014-01-01

    Using "grown fuels", as opposed to "fossil fuels" such as coal, natural gas and oil can be a possible solution to the global energy crisis by creating a decentralized power generation network. Wood is among the most efficient sources of bioenergy in terms of quantity of energy released by unit of carbon emitted compared with other energy crops. Research, development and innovation create new opportunities for the process of gathering and transforming the raw material into energy. Innovation s...

  20. Marine energies, the new wave of renewable energy sources

    International Nuclear Information System (INIS)

    Hydro-kinetic power, wave energy, thermal energy of seawater, all these techniques have a low notoriety for the moment but are progressively gaining ground thanks to technological progress, to public support, but first of all to the mobilization of companies and regions in concern. This article shows that France is still within the time to build up its renewable marine energies industry

  1. Chemical energy sources transformations by remote experiment

    OpenAIRE

    Tkáč, Lukáš; Schauer, František; Gerhátová, Žaneta

    2014-01-01

    The paper describes the first experience with the set up, functioning and data evaluation of the remote experiment "Energy transformation" accessible via Internet (http://remotelab10.truni.sk ) as a part of the e-laboratory at the Department of Physics, Faculty of Education, Trnava University in Trnava, Slovakia. The remote experiment control and data acquisition is based on the system ISES (Internet School Experimental System) and its control program and www page are built using the environm...

  2. Electric power generation from renewable energy sources in Saxony

    International Nuclear Information System (INIS)

    The report sums up the potentials for electric energy generation from different renewable energy sources in Saxony. Natural potentials, technical potentials and economic potentials are considered separately. The established technical potential (without biomass) corresponds roughly to an electic power generation of 7400 GW hours annually. About 2/3 of this is wind energy, the rest is divided equally among hydro power and photo-voltaics. The harnessing of these potentials since 1990 is described in detail. Apart from hydro power, which has a long history as an energy source, wind energy, especially, is experiencing a very dynamic development. In 1997 still, wind power will outstrip hydro power as the most important renewable energy source in Saxony. But the further extension of these two energy sources meets increasingly with ecological objections or opposition. In 1996, about 1.3 per cent of the electric power consumed in Saxony came from renewable energy sources. It seems possible to increase this share to 5 per cent by the year 2000. (orig.)

  3. Financial incentives for renewable energy sources: how much?

    International Nuclear Information System (INIS)

    In this article is assessed the costs and effectiveness of financial incentives policies to stimulate the development of renewable energy sources for electricity production in view of the European goals for the year 2020

  4. Energy Efficiency and Importance of Renewable Energy Sources in Latvia

    Science.gov (United States)

    Skapare, I.; Kreslins, A.

    2007-10-01

    The main goal of Latvian energy policy is to ensure safe and environmentally friendly long-term energy supply at cost-effective prices, contributing to enhance competitiveness, and to ensure safe energy transit. The Latvian Parliament approved an Energy Efficiency Strategy in 2000. Its objective is to decrease energy consumption per unit of GDP by 25% by 2010. Awareness raising, implementation of standards and economic incentives for self financing are the main instruments to increase energy efficiency, mentioned in the strategy. Latvia, as many other European Union member states, is dependent on the import of primary energy resources. The Latvian Renewable Energy strategy is still under development. The only recent study on RES was developed in the framework of a PHARE program in year 2000: "Renewable energy resource program", where three main objectives for a future RES strategy were proposed: 1. To increase the use of wood waste and low value wood and forest residues. 2. To improve efficiency of combustion technologies and to replace outdated plants. 3. To increase the use of renewables in Combined Heat and Power plants (CHP). Through the Renewable Energy and Energy Efficiency Partnership, partners will develop a set of new shared activities, and coordinate and strengthen existing efforts in this area.

  5. Development of Electricity Generation from Renewable Energy Sources in Turkey

    Science.gov (United States)

    Kentel, E.

    2011-12-01

    Electricity is mainly produced from coal, natural gas and hydropower in Turkey. However, almost all the natural gas and high quality coal are imported. Thus, increasing the shares of both hydro and other renewables in energy supply is necessary to decrease dependency of the country on foreign sources. In 2008, the total installed capacity of Turkey was around 42000 MW and 66 % of this was from thermal sources. The remaining 33 % was from hydro, which leaves only one percent for the other renewable energy sources. The share of renewable energy in the energy budget of Turkey has increased in the last two decades; however, in 2008, only 17 % of the total electricity generation was realized from renewable sources most of which was hydro. According to State Hydraulic Works (SHW) which is the primary executive state agency responsible for the planning, operating and managing of Turkey's water resources, Turkey utilizes only around 35% of its economically viable hydro potential. The current situation clearly demonstrates the need for increasing the share of renewables in the energy budget. New laws, such as the Electricity Market Law, have been enacted and the following items were identified by the Ministry of Energy and Natural Resources of Turkey among primary energy policies and priorities: (i) decreasing dependency on foreign resources by prioritizing utilization of natural resources, (ii) increasing the share of renewable energy resources in the energy budget of Turkey; (iii) minimization of adverse environmental impacts of production and utilization of natural resources. The government's energy policy increased investments in renewable energy resources; however lack of a needed legal framework brought various environmental and social problems with this fast development. The development of the share of renewable resources in the energy budget, current government policy, and environmental concerns related with renewables, and ideas to improve the overall benefits of

  6. Energy sources and power plants; Energiequellen und Kraftwerke

    Energy Technology Data Exchange (ETDEWEB)

    Schulz, Detlef [Helmut-Schmidt-Univ. / Univ. der Bundeswehr, Hamburg (Germany). Professur fuer Elektrische Energiesysteme; Schulz, Karen

    2013-07-01

    Energy is obtained from various energy sources (coal, petroleum, natural gas, nuclear fuels, wind energy, solar energy, hydro power, biomass, geothermal energy). These differ in each case with respect to their availability, methods of their production and the required power plant technologies. As technologies of the future fuel cells and nuclear fusion are traded. [German] Energie wird aus verschiedenen Energietraegern gewonnen (Kohle, Erdoel, Erdgas, Kernbrennstoffe, Windenergie, Solarenergie, Wasserkraft, Biomasse, Geothermie). Diese unterscheiden sich jeweils hinsichtlich ihrer Verfuegbarkeit, der Methoden ihrer Gewinnung und der benoetigten Kraftwerkstechnologien. Als Zukunftstechnologien werden Brennstoffzellen und Kernfusion gehandelt.

  7. SINGLE - PHASE INVERTER CONTROL TECHNIQUES FOR INTERFACING RENEWABLE ENERGY SOURCES

    OpenAIRE

    C.Nallasivam

    2015-01-01

    A novel current control technique is proposed to control power flow from a renewable energy source feeding a microgrid system through a three - phase parallel - connected inverter. The parallel - connected inverter ensures that the power flow from the grid with low - current total harmonic distortion even in the presence of nonlinear load. The renewable energy sources ar e paralleled, and the average of this constant sup...

  8. Optimum target source term estimation for high energy electron accelerators

    Science.gov (United States)

    Nayak, M. K.; Sahu, T. K.; Nair, Haridas G.; Nandedkar, R. V.; Bandyopadhyay, Tapas; Tripathi, R. M.; Hannurkar, P. R.

    2016-05-01

    Optimum target for bremsstrahlung emission is defined as the thickness of the target material, which produces maximum bremsstrahlung yield, on interaction of electron with the target. The bremsstrahlung dose rate per unit electron beam power at a distance of 1 m from the target material gives the optimum target source term. In the present work, simulations were performed for three different electron energies, 450, 1000 and 2500 MeV using EGSnrc Monte-Carlo code to determine the optimum thickness. An empirical relation for optimum target as a function of electron energy and atomic number of the target materials is found out from results. Using the simulated optimum target thickness, experiments are conducted to determine the optimum target source term. For the experimental determination, two available electron energies, 450 MeV and 550 MeV from booster synchrotron of Indus facility is used. The optimum target source term for these two energies are also simulated. The experimental and simulated source term are found to be in very good agreement within ±3%. Based on the agreement of the simulated source term with the experimental source term at 450 MeV and 550 MeV, the same simulation methodology is used to simulate optimum target source term up to 2500 MeV. The paper describes the simulations and experiments carried out on optimum target bremsstrahlung source term and the results obtained.

  9. Intracluster Supernova as a Possible Extra Energy Source of Clusters

    OpenAIRE

    Sasaki, Shin

    2000-01-01

    The observed luminosity -- temperature relation of clusters is considerably steeper than that expected from a simple scaling relation. Although extra energy input is a likely solution, its source has not been identified. We propose intracluster supernova as a possible source, and also predict the supernova rate in intracluster space as a critical test.

  10. Strategy on renewable energy sources in Romania

    International Nuclear Information System (INIS)

    The key to successful development of renewable energies in Romania requires a combination of political commitment and decision making as well as support mechanism including well defined government targets, technological advances and public acceptance. Overall short, medium and long term targets and required funding are recommended while expected benefits are estimated. Public funds in the form of grants and subsidies to promote and support RES constitute one of the best investments in the national economy. Commercial investments in RES will contribute to the country's balance of payments as well as towards the environmental protection. Therefore these actions may be supported through a special fund, in particular designed for RES and energy conservation investments. As a first step towards the commercialization of RES a short term action plan needs to be implemented for achieving the set forth long term objectives. This plan includes promising projects for the demonstration of technologically and economically viable applications in each RES sector as well as institutional and other soft measures .The RES promotional policy measures have to be translated into concrete legislation providing the necessary framework into which the sector will operate with transparency and open competitiveness. One of the key policies for RES strategy is to organize a flexible and efficient scheme for the implementation of the policy adopted by the government. The total rural population, together with the urban population living in medium sized towns will be considered as the primary market segment for RES applications (about 61 % of total population). (author). 1 fig., 2 tabs., 18 refs

  11. High-energy Neutrinos from Sources in Clusters of Galaxies

    Science.gov (United States)

    Fang, Ke; Olinto, Angela V.

    2016-09-01

    High-energy cosmic rays can be accelerated in clusters of galaxies, by mega-parsec scale shocks induced by the accretion of gas during the formation of large-scale structures, or by powerful sources harbored in clusters. Once accelerated, the highest energy particles leave the cluster via almost rectilinear trajectories, while lower energy ones can be confined by the cluster magnetic field up to cosmological time and interact with the intracluster gas. Using a realistic model of the baryon distribution and the turbulent magnetic field in clusters, we studied the propagation and hadronic interaction of high-energy protons in the intracluster medium. We report the cumulative cosmic-ray and neutrino spectra generated by galaxy clusters, including embedded sources, and demonstrate that clusters can contribute a significant fraction of the observed IceCube neutrinos above 30 TeV while remaining undetected in high-energy cosmic rays and γ rays for reasonable choices of parameters and source scenarios.

  12. High-energy neutrinos from sources in clusters of galaxies

    CERN Document Server

    Fang, Ke

    2016-01-01

    High-energy cosmic rays can be accelerated in clusters of galaxies, by mega-parsec scale shocks induced by accretion of gas during the formation of large-scale structure, or by powerful sources harbored in clusters. Once accelerated, the highest energy particles leave the cluster via almost rectilinear trajectories, while lower energy ones can be confined by the cluster magnetic field up to cosmological time and interact with the intracluster gas. Using a realistic model of the baryon distribution and the turbulent magnetic field in clusters, we studied the propagation and hadronic interaction of high-energy protons in the intracluster medium. We report the cumulative cosmic ray and neutrino spectra generated by galaxy clusters including embedded sources, and demonstrate that clusters can contribute a significant fraction of the observed IceCube neutrinos above 30 TeV while remaining undetected in high-energy cosmic rays and $\\gamma$ rays for reasonable choices of parameters and source scenarios.

  13. Secondary School Teachers' Knowledge and Attitudes Towards Renewable Energy Sources

    Science.gov (United States)

    Liarakou, Georgia; Gavrilakis, Costas; Flouri, Eleni

    2009-04-01

    Investigating knowledge, perceptions as well as attitudes of public that concern various aspects of environmental issues is of high importance for Environmental Education. An integrated understanding of these parameters can properly support the planning of Environmental Education curriculum and relevant educational materials. In this survey we investigated knowledge and attitudes of secondary school teachers in Greece towards renewable energy sources, particularly wind and solar energy systems. A questionnaire with both open and close questions was used as the main methodological instrument. Findings revealed that although teachers were informed about renewable energy sources and well disposed towards these sources, they hardly expressed clear positions regarding several issues about wind and solar energy technologies and farms. Moreover such themes are limited integrated in teaching either as extra curricular educational programs or through the curriculum. These findings cannot confirm that teachers could influence students' opinion towards renewable energy systems. Thus, authorities should invest more in Environmental Education and relevant Teachers' Education.

  14. Opportunities for renewable energy sources in Central Asia countries

    Energy Technology Data Exchange (ETDEWEB)

    Obozov, A.J. [Project KUN (Kyrgyzstan); Loscutoff, W.V. [National Renewable Energy Lab., Golden, CO (United States)

    1998-07-01

    This report presents an overview of the state of conventional energy sources and the potential for development of renewable energy sources in the Central Asia countries of Kazakhstan, Uzbekistan, Kyrgyzstan, Turkmenistan, and Tajikistan. The region has a population of about 50 million in an area of more than four million square kilometers. The per capita gross internal product is more than $2,500, although the economy has been declining the past five years. The area has substantial coal, oil, uranium, and natural gas reserves, although they are not distributed equally among the five countries. Energy production is such that the countries do not have to rely heavily on imports. One of the problems in Central Asia is that the energy prices are substantially below the world prices. This is a factor in development of renewable energy sources. The primary renewable energy resources available are wind in Kazakhstan, solar in the entire region, biomass in Kyrgyzstan, and micro-hydropower stations in Kazakhstan and Kyrgyzstan. All of these have the potential to provide a significant amount of the required energy for the region. However, all of the countries have an abundance of various renewable energy resources. To effectively use these resources, however, a number of barriers to their development and commercialization must be overcome. These include low prices of conventional energy sources, absence of legislative support, lack of financing for new technologies, and lack of awareness of renewable energy sources by the population. A number of specific actions are proposed to overcome these barriers. These include establishment of a Central Asia coordinating council for renewable energy, development of a regional renewable energy program, and setting up a number of large demonstration projects. 16 figs.

  15. Panchromatic spectral energy distributions of Herschel sources

    CERN Document Server

    Berta, S; Santini, P; Wuyts, S; Rosario, D; Brisbin, D; Cooray, A; Franceschini, A; Gruppioni, C; Hatziminaoglou, E; Hwang, H S; Floc'h, E Le; Magnelli, B; Nordon, R; Oliver, S; Page, M J; Popesso, P; Pozzetti, L; Pozzi, F; Riguccini, L; Rodighiero, G; Roseboom, I; Scott, Douglas; Symeonidis, M; Valtchanov, I; Viero, M; Wang, L

    2013-01-01

    (abridged) Far-infrared Herschel photometry from the PEP and HerMES programs is combined with ancillary datasets in the GOODS-N, GOODS-S, and COSMOS fields. Based on this rich dataset, we reproduce the restframe UV to FIR ten-colors distribution of galaxies using a superposition of multi-variate Gaussian modes. The median SED of each mode is then fitted with a modified version of the MAGPHYS code that combines stellar light, emission from dust heated by stars and a possible warm dust contribution heated by an AGN. The defined Gaussian grouping is also used to identify rare sources. The zoology of outliers includes Herschel-detected ellipticals, very blue z~1 Ly-break galaxies, quiescent spirals, and torus-dominated AGN with star formation. Out of these groups and outliers, a new template library is assembled, consisting of 32 SEDs describing the intrinsic scatter in the restframe UV-to-submm colors of infrared galaxies. This library is tested against L(IR) estimates with and without Herschel data included, an...

  16. Development of a high-energy distributed energy source electromagnetic railgun with improved energy conversion efficiency

    International Nuclear Information System (INIS)

    Vought Corporation in cooperation with the Center for Electromechanics at the University of Texas (CEM-UT) has developed under sponsorship by the Defense Advanced Research Projects Agency (DARPA) and the Army Armament, Munitions, and Chemical Command (AMCCOM) a high-energy distributed energy source (DES) electromagnetic (EM) railgun accelerator. This paper discusses the development and current status of the DES railgun which has the design capability to launch projectile masses up to 60 grams to the 3-4 km/sec velocity regime with energy conversion efficiencies above 35 percent. These goals are being accomplished through utilization of scaled-energy CEM-UT railgun experiments for sequenced timing/staging and a full energy (575 kJ) design at Vought for high efficiency capability. The operational Vought single-pulse railgun forms the baseline for the full energy testing

  17. Analysis of Energy Efficiency in Dynamic Optical Networks Employing Solar Energy Sources

    DEFF Research Database (Denmark)

    Wang, Jiayuan; Fagertun, Anna Manolova; Ruepp, Sarah Renée;

    2013-01-01

    The paper presents energy efficient routing in dynamic optical networks, where solar energy sources are employed for the network nodes. Different parameters are evaluated, including the number of nodes that have access to solar energy sources, the different maximum solar output power, traffic type...

  18. Dynamic energy management employing renewable energy sources in IP over DWDM networks

    DEFF Research Database (Denmark)

    Chen, Xin; Phillips, Chris; Wang, Jiayuan;

    2013-01-01

    management framework employing renewable energy sources in IP over DWDM core networks. The main concept is to combine infrastructure sleeping and virtual router migration to improve the network energy efficiency. By using the energy source information provided by the smart grid, the nodes that are powered...

  19. Preparatory assistance project alternative energy sources. Summary of results

    International Nuclear Information System (INIS)

    This work is about the forest areas and the artificial forest wood survey carried out in the alternative energy sources framework project. The use of wood as fuel in Uruguay requires specific actions of the State to ensure the balanced management of natural energy resources

  20. New, more effective methods of exploiting energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Pallares Huici, E.

    1986-01-01

    The energy crisis has made it necessary both to rationalise and improve old technology and to seek new sources of energy. This article reviews new, more efficient methods of using conventional fuels, new combustion technology, fluidised beds, use of heat produced by residual water processing plant, etc.

  1. High-energy diffraction microscopy at the advanced photon source

    DEFF Research Database (Denmark)

    Lienert, U.; Li, S. F.; Hefferan, C. M.;

    2011-01-01

    The status of the High Energy Diffraction Microscopy (HEDM) program at the 1-ID beam line of the Advanced Photon Source is reported. HEDM applies high energy synchrotron radiation for the grain and sub-grain scale structural and mechanical characterization of polycrystalline bulk materials in situ...

  2. Power Electronics as Efficient Interface of Renewable Energy Sources

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Chen, Zhe; Kjær, Søren Bækhøj

    2004-01-01

    renewable energy conversion system, will play an important part in our future energy supply. But other sources like microturbines, photovoltaics and fuel cell systems may also be serious contributor to the power supply. Characteristically, power electronics will be an efficient and important interface...

  3. Modeling of an autonomous microgrid for renewable energy sources integration

    DEFF Research Database (Denmark)

    Serban, I.; Teodorescu, Remus; Guerrero, Josep M.;

    2009-01-01

    The frequency stability analysis in an autonomous microgrid (MG) with renewable energy sources (RES) is a continuously studied issue. This paper presents an original method for modeling an autonomous MG with a battery energy storage system (BESS) and a wind power plant (WPP), with the purpose...

  4. Writable electrochemical energy source based on graphene oxide

    Science.gov (United States)

    Wei, Di

    2015-10-01

    Graphene oxide (GO) was mainly used as raw material for various types of reduced graphene oxide (rGO) as a cost effective method to make graphene like materials. However, applications of its own unique properties such as extraordinary proton conductivity and super-permeability to water were overlooked. Here GO based battery-like planar energy source was demonstrated on arbitrary insulating substrate (e.g. polymer sheet/paper) by coating PEDOT, GO ink and rGO on Ag charge collectors. Energy from such GO battery depends on its length and one unit cell with length of 0.5 cm can generate energy capacity of 30 Ah/L with voltage up to 0.7 V when room temperature ionic liquid (RTIL) is added. With power density up to 0.4 W/cm3 and energy density of 4 Wh/L, GO battery was demonstrated to drive an electrochromic device. This work is the first attempt to generate decent energy using the fast transported water molecules inside GO. It provides very safe energy source that enables new applications otherwise traditional battery technology can not make including building a foldable energy source on paper and platform for futuristic wearable electronics. A disposable energy source made of GO was also written on a plastic glove to demonstrate wearability.

  5. Turbulence generation through intense kinetic energy sources

    Science.gov (United States)

    Maqui, Agustin F.; Donzis, Diego A.

    2016-06-01

    Direct numerical simulations (DNS) are used to systematically study the development and establishment of turbulence when the flow is initialized with concentrated regions of intense kinetic energy. This resembles both active and passive grids which have been extensively used to generate and study turbulence in laboratories at different Reynolds numbers and with different characteristics, such as the degree of isotropy and homogeneity. A large DNS database was generated covering a wide range of initial conditions with a focus on perturbations with some directional preference, a condition found in active jet grids and passive grids passed through a contraction as well as a new type of active grid inspired by the experimental use of lasers to photo-excite the molecules that comprise the fluid. The DNS database is used to assert under what conditions the flow becomes turbulent and if so, the time required for this to occur. We identify a natural time scale of the problem which indicates the onset of turbulence and a single Reynolds number based exclusively on initial conditions which controls the evolution of the flow. It is found that a minimum Reynolds number is needed for the flow to evolve towards fully developed turbulence. An extensive analysis of single and two point statistics, velocity as well as spectral dynamics and anisotropy measures is presented to characterize the evolution of the flow towards realistic turbulence.

  6. Energy sources, self-organization, and the origin of life.

    Science.gov (United States)

    Boiteau, Laurent; Pascal, Robert

    2011-02-01

    The emergence and early developments of life are considered from the point of view that contingent events that inevitably marked evolution were accompanied by deterministic driving forces governing the selection between different alternatives. Accordingly, potential energy sources are considered for their propensity to induce self-organization within the scope of the chemical approach to the origin of life. Requirements in terms of quality of energy locate thermal or photochemical activation in the atmosphere as highly likely processes for the formation of activated low-molecular weight organic compounds prone to induce biomolecular self-organization through their ability to deliver quanta of energy matching the needs of early biochemical pathways or the reproduction of self-replicating entities. These lines of reasoning suggest the existence of a direct connection between the free energy content of intermediates of early pathways and the quanta of energy delivered by available sources of energy.

  7. Electrochemical energy storage for renewable sources and grid balancing

    CERN Document Server

    Moseley, Patrick T

    2015-01-01

    Electricity from renewable sources of energy is plagued by fluctuations (due to variations in wind strength or the intensity of insolation) resulting in a lack of stability if the energy supplied from such sources is used in 'real time'. An important solution to this problem is to store the energy electrochemically (in a secondary battery or in hydrogen and its derivatives) and to make use of it in a controlled fashion at some time after it has been initially gathered and stored. Electrochemical battery storage systems are the major technologies for decentralized storage systems and hydrogen

  8. New renewable source of energy from municipal solid waste plastics

    Energy Technology Data Exchange (ETDEWEB)

    Sarker, Moinuddin; Zaman, Ashiquz; Mamunor Rashid, Mohammad

    2010-09-15

    Renewable energy plays an important role in the supply of energy. When energy sources are used, the demand for fossil fuels is reduced. Emissions from the evaporation and combustion of these traditional fossil fuels contributing to a range of environmental and health problems, causing poor air quality, and emitting greenhouse gases that contribute to global warming. Alternative fuel created from domestic sources has been proposed as a solution to these problems and many alternative fuels are being developed based on solar, wind and biomass. Natural State Research has developed different alternative hydrocarbon fuel produced from abundant waste plastic materials.

  9. SWOT analysis of the renewable energy sources in Romania - case study: solar energy

    Science.gov (United States)

    Lupu, A. G.; Dumencu, A.; Atanasiu, M. V.; Panaite, C. E.; Dumitrașcu, Gh; Popescu, A.

    2016-08-01

    The evolution of energy sector worldwide triggered intense preoccupation on both finding alternative renewable energy sources and environmental issues. Romania is considered to have technological potential and geographical location suitable to renewable energy usage for electricity generation. But this high potential is not fully exploited in the context of policies and regulations adopted globally, and more specific, European Union (EU) environmental and energy strategies and legislation related to renewable energy sources. This SWOT analysis of solar energy source presents the state of the art, potential and future prospects for development of renewable energy in Romania. The analysis concluded that the development of solar energy sector in Romania depends largely on: viability of legislative framework on renewable energy sources, increased subsidies for solar R&D, simplified methodology of green certificates, and educating the public, investors, developers and decision-makers.

  10. Phase 1 report: investigation of geothermal energy information sources

    Energy Technology Data Exchange (ETDEWEB)

    1976-07-14

    A subject screening list was developed which would be used by acquisitions specialists as a guide to the orientation of pertinent literature. The subject screening list was derived primarily from the geothermal subset of the ERDA Energy Thesaurus and from the ERDA Energy Information Data Base Subject Categories (TID-4584). The subject screening list is included. Subsequent to preparation of the subject screening list, a core list of serial publications containing geothermal energy information was generated by SIS library scientists. This list was corelated with the ERDA-TIC serial publications list. Included in both lists is an estimate of the annual geothermal information yield of the serial sources. A listing of sources of geothermal energy information other than serial publications and the conclusions, including methods of acquisitioning to be utilized and the estimated annual volume of information from all sources are presented.

  11. Energy Economics and Policy of Renewable Energy Sources in the European Union

    OpenAIRE

    Wadim Strielkowski; Štěpán Krška; Evgeny Lisin

    2013-01-01

    European Union adapted the policy of reducing its carbon footprint and embarked on the journey to shift to renewable energy sources in the early 1990s. The whole process started with implementations of binding rules that set up indicative targets for the EU Member States. However, this process had to go hand in hand with high energy costs charged to the consumers. This paper defines various types of renewable sources in the EU and analyses European legislation on renewable energy sources. In ...

  12. THE PLACE OF RENEWABLE SOURCES AND ENERGY EFFICIENCY IN THE ENERGY POLICY OF THE EUROPEAN UNION

    OpenAIRE

    Slobodan Cvetanović , Miljan Jovanović

    2014-01-01

    The increasing renewable source usage and energy efficiency enhancement represent the key aims of the energy sector's development in EU countries. The purpose of their implementation is at the same time the creation of the renewable sources concept as a new development paradigm.Thus, this points to the conclusion that all the projects of renewable source usage and energy efficiency enhancement must be viewed from the perspective of the manifestation of economic, environmental and social effec...

  13. ENEGY FORESTRY A SOURCE OF ENERGY FOR THE ROMANIAN ECONOMY

    Directory of Open Access Journals (Sweden)

    Margareta RUSU

    2014-06-01

    Full Text Available Using "grown fuels", as opposed to "fossil fuels" such as coal, natural gas and oil can be a possible solution to the global energy crisis by creating a decentralized power generation network. Wood is among the most efficient sources of bioenergy in terms of quantity of energy released by unit of carbon emitted compared with other energy crops. Research, development and innovation create new opportunities for the process of gathering and transforming the raw material into energy. Innovation should be targeted to deliver sustainability, biodiversity and economic growth. Romanian has a high potential and can develop energy forestry in order to reduce CO2 emissions and ensure an alternative energy solution and an energy reserve. This paper aims to analize the challenges and opportunities the biomass energy industry creates in the context of climate change mitigation which must be seen from an entrepreneurial perspective in Romania.

  14. A Stochastic Calculus for Network Systems with Renewable Energy Sources

    CERN Document Server

    Wu, Kui; Marinakis, Dimitri

    2011-01-01

    We consider the performance modeling and evaluation of network systems powered with renewable energy sources such as solar and wind energy. Such energy sources largely depend on environmental conditions, which are hard to predict accurately. As such, it may only make sense to require the network systems to support a soft quality of service (QoS) guarantee, i.e., to guarantee a service requirement with a certain high probability. In this paper, we intend to build a solid mathematical foundation to help better understand the stochastic energy constraint and the inherent correlation between QoS and the uncertain energy supply. We utilize a calculus approach to model the cumulative amount of charged energy and the cumulative amount of consumed energy. We derive upper and lower bounds on the remaining energy level based on a stochastic energy charging rate and a stochastic energy discharging rate. By building the bridge between energy consumption and task execution (i.e., service), we study the QoS guarantee under...

  15. Constraining High-Energy Cosmic Neutrino Sources: Implications and Prospects

    CERN Document Server

    Murase, Kohta

    2016-01-01

    We consider limits on the local ($z=0$) density ($n_0$) of extragalactic neutrino sources set by the nondetection of steady high-energy neutrino sources producing $\\gtrsim30$ TeV muon multiplets in the present IceCube data, taking into account the redshift evolution, luminosity function and neutrino spectrum of the sources. We show that the lower limit depends weakly on source spectra and strongly on redshift evolution. We find $n_0\\gtrsim{10}^{-7}~{\\rm Mpc}^{-3}$ for standard candle sources evolving rapidly, $n_s\\propto{(1+z)}^3$, and $n_0\\gtrsim{10}^{-5}~{\\rm Mpc}^{-3}$ for nonevolving sources. The corresponding upper limits on their neutrino luminosity are $L_{{\

  16. Energy Efficiency of Biogas Produced from Different Biomass Sources

    Science.gov (United States)

    Begum, Shahida; Nazri, A. H.

    2013-06-01

    Malaysia has different sources of biomass like palm oil waste, agricultural waste, cow dung, sewage waste and landfill sites, which can be used to produce biogas and as a source of energy. Depending on the type of biomass, the biogas produced can have different calorific value. At the same time the energy, being used to produce biogas is dependent on transportation distance, means of transportation, conversion techniques and for handling of raw materials and digested residues. An energy systems analysis approach based on literature is applied to calculate the energy efficiency of biogas produced from biomass. Basically, the methodology is comprised of collecting data, proposing locations and estimating the energy input needed to produce biogas and output obtained from the generated biogas. The study showed that palm oil and municipal solid waste is two potential sources of biomass. The energy efficiency of biogas produced from palm oil residues and municipal solid wastes is 1.70 and 3.33 respectively. Municipal solid wastes have the higher energy efficiency due to less transportation distance and electricity consumption. Despite the inherent uncertainties in the calculations, it can be concluded that the energy potential to use biomass for biogas production is a promising alternative.

  17. The fractal nature materials microstructure influence on electrochemical energy sources

    Directory of Open Access Journals (Sweden)

    Mitić V.V.

    2015-01-01

    Full Text Available With increasing of the world energy crisis, research for new, renewable and alternative energy sources are in growth. The focus is on research areas, sometimes of minor importance and applications, where the different synthesis methods and microstructure properties optimization, performed significant improvement of output materials’ and components’ electro-physical properties, which is important for higher energy efficiency and in the electricity production (batteries and battery systems, fuel cells and hydrogen energy contribution. Also, the storage tanks capacity improvement, for the energy produced on such way, which is one of the most important development issues in the energy sphere, represents a very promising research and application area. Having in mind, the results achieved in the electrochemical energy sources field, especially electrolyte development, these energy sources, materials fractal nature optimization analysis contribution, have been investigated. Based on materials fractal structure research field, particularly electronic materials, we have performed microstructure influence parameters research in electrochemistry area. We have investigated the Ho2O3 concentration influence (from 0.01wt% to 1wt% and sintering temperature (from 1320°C to 1380°C, as consolidation parameters, and thus, also open the electrochemical function fractalization door and in the basic thermodynamic parameters the fractal correction introduced. The fractal dimension dependence on additive concentration is also investigated. [Projekat Ministarstva nauke Republike Srbije, br. 172057: Directed synthesis, structure and properties of multifunctional materials

  18. Energy Efficiency of Biogas Produced from Different Biomass Sources

    International Nuclear Information System (INIS)

    Malaysia has different sources of biomass like palm oil waste, agricultural waste, cow dung, sewage waste and landfill sites, which can be used to produce biogas and as a source of energy. Depending on the type of biomass, the biogas produced can have different calorific value. At the same time the energy, being used to produce biogas is dependent on transportation distance, means of transportation, conversion techniques and for handling of raw materials and digested residues. An energy systems analysis approach based on literature is applied to calculate the energy efficiency of biogas produced from biomass. Basically, the methodology is comprised of collecting data, proposing locations and estimating the energy input needed to produce biogas and output obtained from the generated biogas. The study showed that palm oil and municipal solid waste is two potential sources of biomass. The energy efficiency of biogas produced from palm oil residues and municipal solid wastes is 1.70 and 3.33 respectively. Municipal solid wastes have the higher energy efficiency due to less transportation distance and electricity consumption. Despite the inherent uncertainties in the calculations, it can be concluded that the energy potential to use biomass for biogas production is a promising alternative.

  19. Low-energy point source searches with IceCube

    Directory of Open Access Journals (Sweden)

    Euler Sebastian

    2016-01-01

    Full Text Available Due to the overwhelming background of atmospheric muons, the traditional IceCube point source search in the Southern Hemisphere is mainly sensitive to neutrinos with energies above 100TeV. A new approach focuses on events starting inside the instrumented volume. By utilizing different veto techniques we are able to significantly reduce the energy threshold and can now for the first time explore the entire Southern Hemisphere at neutrino energies as low as 100GeV. We present the results of two analyses targeting slightly different energy ranges. Both use one year of data taken with the completed IceCube detector in 2011/12.

  20. Note: Localization based on estimated source energy homogeneity

    Science.gov (United States)

    Turkaya, Semih; Toussaint, Renaud; Eriksen, Fredrik Kvalheim; Lengliné, Olivier; Daniel, Guillaume; Flekkøy, Eirik G.; Mâløy, Knut Jørgen

    2016-09-01

    Acoustic signal localization is a complex problem with a wide range of industrial and academic applications. Herein, we propose a localization method based on energy attenuation and inverted source amplitude comparison (termed estimated source energy homogeneity, or ESEH). This inversion is tested on both synthetic (numerical) data using a Lamb wave propagation model and experimental 2D plate data (recorded with 4 accelerometers sensitive up to 26 kHz). We compare the performance of this technique with classic source localization algorithms: arrival time localization, time reversal localization, and localization based on energy amplitude. Our technique is highly versatile and out-performs the conventional techniques in terms of error minimization and cost (both computational and financial).

  1. Renewable energy sources cost benefit analysis and prospects for Italy

    International Nuclear Information System (INIS)

    In light of Italy's over-dependency on imported oil, and due to this nation's commitment to the pursuit of the strict environmental protection policies of the European Communities, ENEL (the Italian National Electricity Board) has become actively involved in research efforts aimed at the commercialization of renewable energy sources - photovoltaic, wind, biomass, and mini-hydraulic. Through the use of energy production cost estimates based on current and near- future levels of technological advancement, this paper assesses prospects for the different sources. The advantages and disadvantages of each source in its use as a suitable complementary energy supply satisfying specific sets of constraints regarding siting, weather, capital and operating costs, maintenance, etc., are pointed out. In comparing the various alternatives, the paper also considers environmental benefits and commercialization feasibility in terms of time and outlay

  2. Energy-Based Collaborative Source Localization Using Acoustic Microsensor Array

    Directory of Open Access Journals (Sweden)

    Li Dan

    2003-01-01

    Full Text Available A novel sensor network source localization method based on acoustic energy measurements is presented. This method makes use of the characteristics that the acoustic energy decays inversely with respect to the square of distance from the source. By comparing energy readings measured at surrounding acoustic sensors, the source location during that time interval can be accurately estimated as the intersection of multiple hyperspheres. Theoretical bounds on the number of sensors required to yield unique solution are derived. Extensive simulations have been conducted to characterize the performance of this method under various parameter perturbations and noise conditions. Potential advantages of this approach include low intersensor communication requirement, robustness with respect to parameter perturbations and measurement noise, and low-complexity implementation.

  3. Evaluation of Energy Use in Public Housing in Lagos, Nigeria: Prospects for Renewable Energy Sources

    OpenAIRE

    Isidore Chukwunweike Ezema; Abiodun O. Olotuah; Olabosipo I Fagbenle

    2016-01-01

    Even though domestic energy can be from either renewable or non-renewable sources, the former is preferred because of its role in reducing both the operational energy intensity and carbon footprint. Given the positive role renewable energy plays in the energy mix, this paper examined the pattern of operational energy use with particular reference to the renewable and non-renewable energy content in medium and high density public residential buildings in Lagos, Nigeria. A survey research metho...

  4. Waste-to-energy: A way from renewable energy sources to sustainable development

    Energy Technology Data Exchange (ETDEWEB)

    Kothari, Richa [Babasaheb BhimRao Ambedkar University, Lucknow, U.P. (India); Tyagi, V.V.; Pathak, Ashish [Centre for Energy Studies, Indian Institute of Technology Delhi, 110016 (India)

    2010-12-15

    Nowadays, energy is key consideration in discussions of sustainable development. So, sustainable development requires a sustainable supply of clean and affordable renewable energy sources that do not cause negative societal impacts. Energy sources such as solar radiation, the winds, waves and tides are generally considered renewable and, therefore, sustainable over the relatively long term. Wastes and biomass fuels are usually viewed as sustainable energy sources. Wastes are convertible to useful energy forms like hydrogen (biohydrogen), biogas, bioalcohol, etc., through waste-to-energy technologies. In this article, possible future energy utilization patterns and related environmental impacts, potential solutions to current environmental problems and renewable energy technologies and their relation to sustainable development are discussed with great emphasis on waste-to-energy routes (WTERs). (author)

  5. Diversification of Energy Supply: Prospects for Emerging Energy Sources

    OpenAIRE

    Ross, Michael M. D.

    2014-01-01

    Asia’s burgeoning energy demand has stimulated interest in photovoltaics, wind power, and unconventional gas (shale gas, tight gas, coal-bed methane, and coal-mine methane). For each of these, the resource, current status, future prospects, environmental implications, investment and infrastructure requirements, and risks are examined. Shale gas has revolutionized North American gas supply, but may develop slowly in Asia due to challenging geological conditions, lack of geological data, dense ...

  6. Understanding and accepting fusion as an alternative energy source

    International Nuclear Information System (INIS)

    Fusion, the process that powers our sun, has long promised to be a virtually inexhaustible source of energy for mankind. No other alternative energy source holds such bright promise, and none has ever presentd such formidable scientific and engineering challenges. Serious research efforts have continued for over 30 years in an attempt to harness and control fusion here on earth. Scientists have made considerable progress in the last decade toward achieving the conditions required for fusion power, and recent experimental results and technological progress have made the scientific feasibility of fusion a virtual certainty. With this knowledge and confidence, the emphasis can now shift toward developing power plants that are practical and economical. Although the necessary technology is not in hand today, the extension to an energy producing system in 20 years is just as attainable as was putting a man on the moon. In the next few decades, the world's population will likely double while the demand for energy will nearly quadruple. Realistic projections show that within the next generation a significant fraction of our electric power must come from alternative energy sources. Increasing environmental concerns may further accelerate this timetable in which new energy sources must be introduced. The continued development of fusion systems to help meet the energy needs of the future will require greater public understanding and support of this technology. The fusion community must do more to make the public aware of the fact that energy is a critical international issue and that fusion is a viable and necessary energy technology that will be safe and economical. 12 refs., 8 figs

  7. Renewable energy made easy free energy from solar, wind, hydropower, and other alternative energy sources

    CERN Document Server

    Craddock, David

    2008-01-01

    Studies have shown that the average North American family will spend more than a quarter of a million dollars on energy in a lifetime. What many other countries, including Germany, Spain, France, Denmark, China, Brazil, and even Iceland, have realized is that there is a better way to power our homes, businesses, and cars by using renewable energy sources. Recently, the United States has begun to understand the importance of reducing its reliance on coal, natural gas, nuclear power, and hydropower plants, which comprise the majority of the nation's electricity, due to increasing oil prices.

  8. Prices and costs of energy sources; Les prix et les couts des sources d'energie

    Energy Technology Data Exchange (ETDEWEB)

    Martin-Amouroux, J.M. [Institut d' Economie et de Politique de l' Energie (CNRS- UPMF), 38 - Grenoble (France)

    2005-07-01

    An evaluation of the complete social energy cost should result from the sum of the production marginal cost, of the external marginal cost and of the marginal cost of substitution of non-renewable energy sources. This last parameter is difficult to estimate because of theoretical and methodological obstacles. The two others are evaluated for different energy sources, in the present day situation, and in the perspective of a probable evolution. Today, fossil fuels have the lowest internal costs whatever their use. Thus, in 'business as usual' energy scenarios, fossil fuels represent more than 80% of the energy supply at the 2050 prospects. However, several uncertainties can affect the future evolution of these costs, some are of geopolitical origin (political fragility of some exporting countries), and some are of environmental origin (internalized costs of CO{sub 2} emissions). Finally, the depletion of some resources should be anticipated. (J.S.)

  9. The source of multi spectral energy of solar energetic electron

    International Nuclear Information System (INIS)

    We study the solar energetic electron distribution obtained from ACE and GOES satellites which have different altitudes and electron spectral energy during the year 1997 to 2011. The electron spectral energies were 0.038–0.315 MeV from EPAM instrument onboard ACE satellite and >2 MeV from GOES satellite. We found that the low electron energy has no correlation with high energy. In spite of we have corrected to the altitude differences. It implied that they originated from time dependent events with different sources and physical processes at the solar atmosphere. The sources of multi spectral energetic electron were related to flare and CME phenomena. However, we also found that high energetic electron comes from coronal hole

  10. Methods for comparative risk assessment of different energy sources

    International Nuclear Information System (INIS)

    The environmental and health aspects of different energy systems, particularly those associated with the generation of electricity, are emerging as significant issues for policy formulation and implementation. This, together with the growing need of many countries to define their energy programmes for the next century, has provided the basis for a renewed interest in the comparative risk assessment of different energy sources (fossil, nuclear, renewables). This document is the outcome of a Specialists Meeting on the procedural and methodological issues associated with comparative health and environmental risks of different energy sources. After an introductory chapter outlining the issues under consideration the papers presented at the Meeting, which have been indexed separately, are given. Refs, figs and tabs

  11. The source of multi spectral energy of solar energetic electron

    Energy Technology Data Exchange (ETDEWEB)

    Herdiwijaya, Dhani [Astronomy Division and Bosscha Observatory, Faculty Mathematics and Natural Sciences, Intitute Technology of Bandung, Ganesha 10, Bandung, Indonesia 40132 dhani@as.itb.ac.id (Indonesia)

    2015-04-16

    We study the solar energetic electron distribution obtained from ACE and GOES satellites which have different altitudes and electron spectral energy during the year 1997 to 2011. The electron spectral energies were 0.038–0.315 MeV from EPAM instrument onboard ACE satellite and >2 MeV from GOES satellite. We found that the low electron energy has no correlation with high energy. In spite of we have corrected to the altitude differences. It implied that they originated from time dependent events with different sources and physical processes at the solar atmosphere. The sources of multi spectral energetic electron were related to flare and CME phenomena. However, we also found that high energetic electron comes from coronal hole.

  12. A source of energy : sustainable architecture and urbanism

    Energy Technology Data Exchange (ETDEWEB)

    Roestvik, Harald N.

    2011-07-01

    An update on the environmental challenges. Meant to inspire and be a source of energy.Tearing down myths and floodlighting paradoxes. Particularly relevant for students of architecture, architects and concerned citizens. Training tasks, recommendations for further source books and web sites, are included. From the content: Climate change and consensus, Population growth, Food production, The sustainable city, Transportation myths and facts, A mini history of environmental architecture, Architects' approach to sustainable design, The failure of western architects; a case study; China, The passive, zeb and plus energy building, Natural ventilation, Sustainable materials, Plastics in building, Nuclear energy, Solar energy, The grid of the future, Indoor climate and health. The sick building syndrome, Radon, Universal design, Paradoxes, Bullying techniques, Trust yourself, Timing, Which gateway will you choose?, On transience. (au)

  13. Renewable energy sources for sustainable tourism in the Carpathian region

    Science.gov (United States)

    Mandryk, O. M.; Arkhypova, L. M.; Pobigun, O. V.; Maniuk, O. R.

    2016-08-01

    The use of renewable energy in sustainable tourism development of the region is grounded in the paper. There are three stages of selecting areas for projects of renewable energy sources: selection of potentially suitable area; consideration of exclusion criteria, detailed assessment of potential sites or areas. The factors of impact on spatial constraints and opportunities for building wind, solar and small hydro power plants on the parameters of sustainable tourism development in the Carpathian region were determined.

  14. A Novel Source of Tagged Low-Energy Nuclear Recoils

    OpenAIRE

    Joshi, Tenzing H. Y.

    2011-01-01

    For sufficiently wide resonances, nuclear resonance fluorescence behaves like elastic photo-nuclear scattering while retaining the large cross-section characteristic of resonant photo-nuclear absorption. We show that NRF may be used to characterize the signals produced by low-energy nuclear recoils by serving as a novel source of tagged low-energy nuclear recoils. Understanding these signals is important in determining the sensitivity of direct WIMP dark-matter and coherent neutrino-nucleus s...

  15. Electric Transport Traction Power Supply System With Distributed Energy Sources

    Science.gov (United States)

    Abramov, E. Y.; Schurov, N. I.; Rozhkova, M. V.

    2016-04-01

    The paper states the problem of traction substation (TSS) leveling of daily-load curve for urban electric transport. The circuit of traction power supply system (TPSS) with distributed autonomous energy source (AES) based on photovoltaic (PV) and energy storage (ES) units is submitted here. The distribution algorithm of power flow for the daily traction load curve leveling is also introduced in this paper. In addition, it illustrates the implemented experiment model of power supply system.

  16. Methane as an energy source for the 21st century

    OpenAIRE

    Nakicenovic, N.

    2002-01-01

    Today, fossil fuels supply about 80% of global primary energy. The consequences are severe for human health from indoor and regional air pollution, acidification due to sulphur and nitrogen oxide emissions and climate change due to rapidly growing greenhouse gas emissions. Therefore, there is a clear need to improve the efficiency and the environmental compatibility of fossil technologies, shift to fossil energy sources with lower environmental impacts such as natural gas, or shift awa...

  17. Energy efficiency: a source of savings; a priority objective

    International Nuclear Information System (INIS)

    Energy efficiency is defined as consumption of less energy whilst delivering the same service. Significant progress has been made through the impact of technology, price increases and awareness of waste. Too often viewed as a constraint, energy efficiency nonetheless constitutes the leading potential source of domestic energy for the 2020 goal. Energy efficiency is or will be (depending on the will of the stakeholders, public authorities and society as a whole) a key market for the future and a pathway to creative innovation. Everything is pointing in that direction: the obligation to reduce greenhouse gas emissions fourfold, the new European Directive on Energy Efficiency to be incorporated, the expected increase in energy prices, the presence in France of industry leaders and of a small-scale but important industry in this sector. The goals in energy efficiency entail: - at Community level, that the objective of 20% energy savings for the 2020 goal becomes binding; - at national level, that public policies for energy efficiency are part of a long-term vision, based on the achievements of the Grenelle Environment Forum and avoid sending out any wrong signals which might adversely affect progress. The ESEC proposals are built around the following four themes: - (residential and service sector) buildings: Make energy efficiency into a real sector and a new opportunity 'work together', Optimise tools and regulations, Be innovative in terms of financial support; - fuel poverty; - industry and agriculture; - the particular situation of the overseas departments

  18. Testing Special Relativity at High Energies with Astrophysical Sources

    Science.gov (United States)

    Stecker, F. W.

    2007-01-01

    Since the group of Lorentz boosts is unbounded, there is a question as to whether Lorentz invariance (LI) holds to infinitely short distances. However, special and general relativity may break down at the Planck scale. Various quantum gravity scenarios such as loop quantum gravity, as well as some forms of string theory and extra dimension models may imply Lorentz violation (LV) at ultrahigh energies. The Gamma-Ray Large Area Space Telescope (GLAST), to be launched in mid-December, will measure the spectra of distant extragalactic sources of high energy gamma-rays, particularly active galactic nuclei and gamma-ray bursts. GLAST can look for energy-dependent gamma-ray propagation effects from such sources as a signal of Lorentz invariance violation. These sources may also exhibit the high energy cutoffs predicted to be the result of intergalactic annihilation interactions with low energy photons having a flux level as determined by various astronomical observations. With LV the threshold for such interactions can be significantly raised, changing the predicted absorption turnover in the observed spectrum of the sources. Stecker and Glashow have shown that the existence such absorption features in the spectra of extragalactic sources puts constraints on LV. Such constraints have important implications for some quantum gravity and large extra dimension models. Future spaceborne detectors dedicated to measuring gamma-ray polarization can look for birefringence effects as a possible signal of loop quantum gravity. A very small LV may also result in the modification or elimination of the GZK effect, thus modifying the spectrum of ultrahigh energy cosmic rays. This possibility can be explored with ground-based arrays such as Auger or with a space based detector system such as the proposed OWL satellite mission.

  19. Nitrification and Anammox with urea as the energy source

    NARCIS (Netherlands)

    Sliekers, A.O.; Haaijer, S.C.M.; Schmid, M.C.; Harhangi, R.H.; Verwegen, K.; Kuenen, J.G.; Jetten, M.S.M.

    2004-01-01

    Urea is present in many ecosystems and can be used as an energy source by chemolithotrophic aerobic ammonia oxidizing bacteria (AOB). Thus the utilization of urea in comparison to ammonia, by AOB as well as anaerobic ammonia oxidizing (Anammox) bacteria was investigated, using enrichments cultures,

  20. EnergyPlus Air Source Integrated Heat Pump Model

    Energy Technology Data Exchange (ETDEWEB)

    Shen, Bo [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Energy and Transportation Science Division; Adams, Mark B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Energy and Transportation Science Division; New, Joshua Ryan [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Energy and Transportation Science Division

    2016-03-30

    This report summarizes the development of the EnergyPlus air-source integrated heat pump model. It introduces its physics, sub-models, working modes, and control logic. In addition, inputs and outputs of the new model are described, and input data file (IDF) examples are given.

  1. Strategy for regenerative energy sources. Status and development potential

    International Nuclear Information System (INIS)

    Without doubt, in the future, we shall have to cover a growing proportion of our energy requirements by utilizing regenerative energy sources such as the sun, wind, water and biomass. The indisputable advantages of inexhaustibility and environment friendliness are, however, compared with the disadvantages of non-uniform demand as well as partially small potential and high costs. In spite of these facts, there are, in the minds of the public, high expectations and great demands on the electricity supply industry in relation to the further development of regenerative power generation. In the future, RWE Energie AG will strongly intensify its efforts towards improving the economics of regenerative power generation. (orig.)

  2. Efficiency of utilization of various sources of energy for growth.

    OpenAIRE

    Donato, K.; Hegsted, D. M.

    1985-01-01

    The relative efficiency of dietary sucrose, protein sources, and fats in depositing body protein and fat (total energy) was directly estimated in young rats by feeding graded levels of each as supplements to a fixed amount of a basal diet that was presumably adequate in all essential nutrients except for energy. Under these conditions, the net gain in total body energy was a linear function of the amount of supplement added and the data fulfill the criteria of a valid slope-ratio bioassay. Th...

  3. Renewable Energy Sources in International and EU Legal Regulations

    Directory of Open Access Journals (Sweden)

    Róża Miklaszewska

    2013-12-01

    Full Text Available The article presents issues relating to international and EU regulations in the field of renewable energy sources (RES. It discusses in a comprehensive manner the most important acts specific for the both regulatory platforms. Also presented are the most important objectives and premises, which these acts implement. The RES development, at both the international and Community levels, is presented in the context of activities undertaken within the energy policy framework at each of the concerned platforms. The description of the characteristics of international and EU legislation also refers to their significant impact on Polish legislation on renewable energy.

  4. Search for high energy cosmic neutrino point sources with ANTARES

    International Nuclear Information System (INIS)

    The aim of this thesis is the search for high energy cosmic neutrinos emitted by point sources with the ANTARES neutrino telescope. The detection of high energy cosmic neutrinos can bring answers to important questions such as the origin of cosmic rays and the γ-rays emission processes. In the first part of the thesis, the neutrino flux emitted by galactic and extragalactic sources and the number of events which can be detected by ANTARES are estimated. This study uses the measured γ-ray spectra of known sources taking into account the γ-ray absorption by the extragalactic background light. In the second part of the thesis, the absolute pointing of the ANTARES telescope is evaluated. Being located at a depth of 2475 m in sea water, the orientation of the detector is determined by an acoustic positioning system which relies on low and high frequency acoustic waves measurements between the sea surface and the bottom. The third part of the thesis is a search for neutrino point sources in the ANTARES data. The search algorithm is based on a likelihood ratio maximization method. It is used in two search strategies; 'the candidate sources list strategy' and 'the all sky search strategy'. Analysing 2007+2008 data, no discovery is made and the world's best upper limits on neutrino fluxes from various sources in the Southern sky are established. (author)

  5. THE NEED FOR THE USE OF RENEWABLE ENERGY SOURCES

    Directory of Open Access Journals (Sweden)

    Grigorash O. V.

    2016-04-01

    Full Text Available The article reveals main reasons for developing tendencies to the using of new types of energy, which are limited supply of traditional fuels and environmental problems associated with its processing. It is shown that new forms of energy plays an important role in the energy supply of many countries of the world, and in the future they can become the main sources of energy to meet the growing needs of the global economy. We reveal main reasons of the increasing interest in renewable energy, and we show the obvious prospects of their use, due to two factors. First, according to experts, the global reserves of traditional fuels are limited, and secondly, this was evidenced by the investments of leading countries in this promising industry. The article lists reasons for the need for the use of renewable energy sources in Russia. Increased consumption of natural resources has become a real threat to the security of the life of human society. The basis of solving modern social and environmental problems is a transition to a regulated process of safe use of natural energy potential to meet the vital needs of people not only in the coming decades, but in the long run. It is concluded, that the determining condition for the development of the human civilization at present and in the future would be the level of natural resources which ensures the needs of the population without making harm to the environment

  6. High energy neutron source for materials research and development

    International Nuclear Information System (INIS)

    Requirements for neutron source for nuclear materials research are reviewed and ESNIT, Energy Selective Neutron Irradiation Test facility proposed by JAERI is discussed. Its principal aims of a wide neutron energy tunability and spectra peaking at each energy to enable characterization of material damage process are demanding but attractive goals which deserve detailed study. It is also to be noted that the requirements make a difference in facility design from those of FMIT, IFMIF and other high energy intense neutron sources built or planned to date. Areas of technologies to be addressed to realize the ESNIT facility are defined and discussed. In order to get neutron source having desired spectral characteristics keeping moderate intensity, projectile and target combinations must be examined including experimentation if necessary. It is also desired to minimize change of flux density and energy spectrum according to location inside irradiation chamber. Extended target or multiple targets configuration might be a solution as well as specimen rotation and choice of combination of projectile and target which has minimum velocity of the center of mass. Though relevant accelerator technology exists, it is to be stressed that considerable efforts must be paid, especially in the area of target and irradiation devices to get ESNIT goal. Design considerations to allow hands-on maintenance and future upgrading possibility are important either, in order to exploit the facility fully for nuclear materials research and development. (author)

  7. Eddy energy sources and flux in the Red Sea

    KAUST Repository

    Zhan, Peng

    2015-04-01

    In the Red Sea, eddies are reported to be one of the key features of hydrodynamics in the basin. They play a significant role in converting the energy among the large-scale circulation, the available potential energy (APE) and the eddy kinetic energy (EKE). Not only do eddies affect the horizontal circulation, deep-water formation and overturning circulation in the basin, but they also have a strong impact on the marine ecosystem by efficiently transporting heat, nutrients and carbon across the basin and by pumping the nutrient-enriched subsurface water to sustain the primary production. Previous observations and modeling work suggest that the Red Sea is rich of eddy activities. In this study, the eddy energy sources and sinks have been studied based on a high-resolution MITgcm. We have also investigated the possible mechanisms of eddy generation in the Red Sea. Eddies with high EKE are found more likely to appear in the central and northern Red Sea, with a significant seasonal variability. They are more inclined to occur during winter when they acquire their energy mainly from the conversion of APE. In winter, the central and especially the northern Red Sea are subject to important heat loss and extensive evaporation. The resultant densified upper-layer water tends to sink and release the APE through baroclinic instability, which is about one order larger than the barotropic instability contribution and is the largest source term for the EKE in the Red Sea. As a consequence, the eddy energy is confined to the upper layer but with a slope deepening from south to north. In summer, the positive surface heat flux helps maintain the stratification and impedes the gain of APE. The EKE is, therefore, much lower than that in winter despite a higher wind power input. Unlike many other seas, the wind energy is not the main source of energy to the eddies in the Red Sea.

  8. Energy Sources Management and Future Automotive Technologies: Environmental Impact

    Directory of Open Access Journals (Sweden)

    Florin Mariasiu

    2012-01-01

    Full Text Available The paper presents the environmental impact created through the introduction of introducing new technologies in transportation domain. New electric vehicles are considered zero-emission vehicles (ZEV. However, electricity produced in power plants is still predominantly based on fossil fuel usage (required for recharge electric vehicle batteries and thus directly affects the quantity of pollutant emissions and greenhouse gases (CO2, NOx and SOx. Given the structure of EU-wide energy sources used for electricity generation, the potential pollutant emissions stemming from these energy sources, related to energy consumption of an electric vehicle, was determined under the projected environmental impact of specific market penetration of electric vehicles. In addition to the overall impact at the EU level, were identified the countries for which the use of electric vehicles is (or not feasible in terms of reaching the lower values ​​of future emissions compared to the present and future European standards.

  9. Optical arc sensor using energy harvesting power source

    Science.gov (United States)

    Choi, Kyoo Nam; Rho, Hee Hyuk

    2016-06-01

    Wireless sensors without external power supply gained considerable attention due to convenience both in installation and operation. Optical arc detecting sensor equipping with self sustaining power supply using energy harvesting method was investigated. Continuous energy harvesting method was attempted using thermoelectric generator to supply standby power in micro ampere scale and operating power in mA scale. Peltier module with heat-sink was used for high efficiency electricity generator. Optical arc detecting sensor with hybrid filter showed insensitivity to fluorescent and incandescent lamps under simulated distribution panel condition. Signal processing using integrating function showed selective arc discharge detection capability to different arc energy levels, with a resolution below 17J energy difference, unaffected by bursting arc waveform. The sensor showed possibility for application to arc discharge detecting sensor in power distribution panel. Also experiment with proposed continuous energy harvesting method using thermoelectric power showed possibility as a self sustainable power source of remote sensor.

  10. ACCELERATING THE ADOPTION PROCESS OF RENEWABLE ENERGY SOURCES AMONG SMES

    Directory of Open Access Journals (Sweden)

    Mirjam Leloux

    2015-07-01

    Full Text Available By 2020, intermittent renewable small scale energy sources (e.g. wind and solar energy are expected to represent about 17% of the EU’s total electricity consumption. All national overriding energy policy objectives are to ensure competitive, secure and sustainable energy for the economy and for society. Renewable energy, allied with energy efficiency, is often found crucial to meet these goals of secure sustainable and competitive energy supplies reducing dependency on expensive fossil imports and underpinning the move towards a low carbon economy while delivering green jobs to the economy. This all contributes to national competitiveness and the jobs and economic growth agenda. However, a straight forward implementation of renewable energy options is not easy, due to various barriers and obstacles. For most SMEs, the concept of generating their own renewable energy is still more of academic than genuine interest. In general, several barriers are experienced, such as high capital investments, slow return on investment, and the lack of knowledge of the benefits. There is a need for education on the benefits and drawbacks of sustainable energy, as well as a greater contribution to costs for this to work. In this paper we describe the intermediate outcomes of a European Partnership under the name of GREAT (Growing Renewable Energy Applications and Technologies, funded under the INTERREG IVB NWE Programme. GREAT aims to encourage communities and small to medium size enterprises (SMEs in Ireland, the United Kingdon, Belgium and The Netherlands to develop technological solutions for Smart Grid, Renewable Energy and Distributive Generation; research and develop policy issues for regulatory authorities and provide structured co-operation opportunities between SMEs and research institutes / technology developers. We developed GREAT spreadsheets to facilitate SMEs in each country to calculate the return-on-investment of renewable energy sources, such as

  11. Current state and utilization of nontraditional and renewable energy sources in Poland

    OpenAIRE

    Szymańska, Daniela; Chodkowska-Miszczuk, Justyna

    2012-01-01

    The aim of the paper is to analyse and assess the use of renewable energy sources in the Polish energy balance for the period 2006-2010. In Poland, in according to the Energy Law (1997), renewable energy sources are sources using the processing power: wind energy, solar radiation, geothermal energy, waves power, energy of currents and tides, energy of river gradient, biogas and biomass. Biomass could be divided into forest biomass, agricultural biomass (mainly energy crops, but also consumer ...

  12. A Flexible Power Electronics Configuration for Coupling Renewable Energy Sources

    Directory of Open Access Journals (Sweden)

    Mattia Filippini

    2015-05-01

    Full Text Available A combination of series, parallel and multilevel power electronics has been investigated as a potential interface for two different types of renewable energy sources and in order to reach higher power levels. Renewable energy sources are typically dispersed in a territory, and sources, like wind and solar, allow small to medium-scale generation of electricity. The configuration investigated in this article aims at adapting the coupling solution to the specific generation characteristics of the renewable energy source to make it fit the electrical network. The configuration consists of a combination of three-phase multilevel converters and single-phase inverters, which are designed to provide flexibility, high power quality and high efficiency. A detailed analysis and simulation is performed to identify the properties in conjunction with the electrical grid requirements and the potential challenges encountered during operation. An optimized operation example of wind generation combined with solar PV generation is presented to exemplify the flexibility and benefits of the proposed configuration.

  13. New impetus to the economy through renewable energy sources

    International Nuclear Information System (INIS)

    The paper shows that the renewable energy sources offer a unique chance: to replace the 'deus ex machina' philosophy by the 'deus ex sole' approach. The reasons why the energy industry refuses to consider exploitation of renewable energy sources are quite obvious. Any deep-cutting change in energy policy priorities would imply likewise deep cuts in the utilities' returns from investments made for existing, conventional power generation systems and transmission infrastructure, which would entail losses in a branch of industry never seen before. It is high time, however, to demand a basic switch in policy and to pave the way for solar energy by appropriate political and economic incentives now, as Germany as one of the highly industrialised countries must not turn a blind eye to its responsability for the global environment. Even if there were not the risk of a global environmental crisis as a consequence of current resource squandering, good economic reasoning and a sense of responsability for the developing economies of the world be reason enough to alter the energy policy approach without hesitation. (orig./CB)

  14. A Source of Energy for Any Kind of Star

    Directory of Open Access Journals (Sweden)

    Rabounski D.

    2006-10-01

    Full Text Available We discuss a recently predicted mechanism whereby energy is produced by the background space non-holonomic field (the global space rotation in Thomson dispersion of light in free electrons. We compare the mechanism to the relations of observational astrophysics — the mass-luminosity relation and the stellar energy relation. We show that by such a mechanism generating energy in a star, the luminosity of a star L is proportional to its volume, with a progression associated with increasing radius. The obtained relation L ≈ R^3.4 explains why there are no stars of a size close to that of the bulky planets. This also explains the extremely high thermal flow from within Jupiter, which most probably has the same energy sources as those within a star, but with a power much less than that required to radiate like a star. The theory, being applied to a laboratory condition, suggests new energy sources, working much more effectively and safely than nuclear energy.

  15. Comparative analysis of traditional and alternative energy sources

    International Nuclear Information System (INIS)

    The presented thesis with designation of Comparing analysis of traditional and alternative energy resources includes, on basis of theoretical information source, research in firm, internal data, trends in company development and market, description of the problem and its application. Theoretical information source is dedicated to the traditional and alternative energy resources, reserves of it, trends in using and development, the balance of it in the world, EU and in Slovakia as well. Analysis of the thesis is reflecting profile of the company and the thermal pump market evaluation using General Electric method. While the company is implementing, except other products, the thermal pumps on geothermal energy base and surround energy base (air), the mission of the comparing analysis is to compare traditional energy resources with thermal pump from the ecological, utility and economic side of it. The results of the comparing analysis are resumed in to the SWOT analysis. The part of the thesis includes t he questionnaire offer for effectiveness improvement and customer satisfaction analysis, and expected possibilities of alternative energy resources assistance (benefits) from the government and EU funds. (authors)

  16. Optimization of sources for focusing wave energy in targeted formations

    KAUST Repository

    Jeong, C

    2010-06-08

    We discuss a numerical approach for identifying the surface excitation that is necessary to maximize the response of a targeted subsurface formation. The motivation stems from observations in the aftermath of earthquakes, and from limited field experiments, whereby increased oil production rates were recorded and were solely attributable to the induced reservoir shaking. The observations suggest that focusing wave energy to the reservoir could serve as an effective low-cost enhanced oil recovery method. In this paper, we report on a general method that allows the determination of the source excitation, when provided with a desired maximization outcome at the targeted formation. We discuss, for example, how to construct the excitation that will maximize the kinetic energy in the target zone, while keeping silent the neighbouring zones. To this end, we cast the problem as an inverse-source problem, and use a partial-differential- equation-constrained optimization approach to arrive at an optimized source signal. We seek to satisfy stationarity of an augmented functional, which formally leads to a triplet of state, adjoint and control problems. We use finite elements to resolve the state and adjoint problems, and an iterative scheme to satisfy the control problem to converge to the sought source signal. We report on one-dimensional numerical experiments in the time domain involving a layered medium of semi-infinite extent. The numerical results show that the targeted formation\\'s kinetic energy resulting from an optimized wave source could be several times greater than the one resulting from a blind source choice, and could overcome the mobility threshold of entrapped reservoir oil. © 2010 Nanjing Geophysical Research Institute.

  17. A high intensity dc H- source for low energy injection

    Science.gov (United States)

    Kuo, T.; Baartman, R.; Dutto, G.; Hahto, S.; ńrje, J.; Liukkonen, E.

    2002-02-01

    While a 20 mA dc H- source system at 25-30 keV beam energy has been developed at TRIUMF several years ago, another recent demand on the system is to provide a 4 to 5 mA H- at the 4-6 keV energy range. We found that at this low energy range, the existing source/extraction system can only give ˜1 mA with poor emittance due to strong space-charge effect. Fortunately, a very special source/extraction mechanism together with the use of neutralization was discovered and developed to overcome this difficulty. Up to 4 mA with a normalized rms emittance of 0.15 π mm mr has been achieved at 6 keV. This performance finds its usefulness for injection systems where lower beam energy and higher beam intensity are required. A copy of the TRIUMF system was constructed and successfully tested in the summer of 2000 for the "H- Acceleration Project" for the K130 cyclotron at Jyväskylä University, Finland.

  18. Renewable energy sources for electricity generation in selected developed countries

    International Nuclear Information System (INIS)

    The objectives of this report are to analyze the present status and to assess the future of selected renewable energy sources (RE) other than hydropower, i.e. wind, solar, biomass, tidal and geothermal, already in use or expected to be used for electricity generation. The report focuses on grid connected technologies leaving stand-alone power plants unconsidered. This report provides recent information on environmental impacts, costs and technical potentials related to the implementation of electricity technologies using these energy sources. The study is limited to six OECD countries, i.e. Australia, the Federal Republic of Germany, Japan, Sweden, the United Kingdom and the United States of America. The situation in other OECD countries is addressed where appropriate, but no comprehensive information is provided. Nevertheless, efforts are made to determine the technical potential of the renewable energy sources for ''Rest of OECD''. The time horizons in this report are 2010 and 2030. While detailed information is provided for the period until 2010, the technical potential for 2030 is discussed only qualitatively. Scenario analysis and the design of national energy and electric systems assuming different sets of objectives and boundary conditions are outside the scope of this study. Nevertheless, the information given in this report should provide input data for such a systems analysis. All the information given in this report is based on literature surveys. Any figure given is contingent on the fact that it has appeared in a paper or a publicly available technical report. 251 refs, figs and tabs

  19. Energy Management Policies for Energy-Neutral Source-Channel Coding

    CERN Document Server

    Castiglione, Paolo; Erkip, Elza; Zemen, Thomas

    2011-01-01

    In cyber-physical systems where sensors measure the temporal evolution of a given phenomenon of interest and radio communication takes place over short distances, the energy spent for source acquisition and compression may be comparable with that used for transmission. Additionally, in order to avoid limited lifetime issues, sensors may be powered via energy harvesting and thus collect all the energy they need from the environment. This work addresses the problem of energy allocation over source acquisition/compression and transmission for energy-harvesting sensors. At first, focusing on a single-sensor, energy management policies are identified that guarantee a maximal average distortion while at the same time ensuring the stability of the queue connecting source and channel encoders. It is shown that the identified class of policies is optimal in the sense that it stabilizes the queue whenever this is feasible by any other technique that satisfies the same average distortion constraint. Moreover, this class...

  20. Low power energy harvesting and storage techniques from ambient human powered energy sources

    Science.gov (United States)

    Yildiz, Faruk

    Conventional electrochemical batteries power most of the portable and wireless electronic devices that are operated by electric power. In the past few years, electrochemical batteries and energy storage devices have improved significantly. However, this progress has not been able to keep up with the development of microprocessors, memory storage, and sensors of electronic applications. Battery weight, lifespan and reliability often limit the abilities and the range of such applications of battery powered devices. These conventional devices were designed to be powered with batteries as required, but did not allow scavenging of ambient energy as a power source. In contrast, development in wireless technology and other electronic components are constantly reducing the power and energy needed by many applications. If energy requirements of electronic components decline reasonably, then ambient energy scavenging and conversion could become a viable source of power for many applications. Ambient energy sources can be then considered and used to replace batteries in some electronic applications, to minimize product maintenance and operating cost. The potential ability to satisfy overall power and energy requirements of an application using ambient energy can eliminate some constraints related to conventional power supplies. Also power scavenging may enable electronic devices to be completely self-sustaining so that battery maintenance can eventually be eliminated. Furthermore, ambient energy scavenging could extend the performance and the lifetime of the MEMS (Micro electromechanical systems) and portable electronic devices. These possibilities show that it is important to examine the effectiveness of ambient energy as a source of power. Until recently, only little use has been made of ambient energy resources, especially for wireless networks and portable power devices. Recently, researchers have performed several studies in alternative energy sources that could provide

  1. Energy efficient wireless sensor networks using asymmetric distributed source coding

    Science.gov (United States)

    Rao, Abhishek; Kulkarni, Murlidhar

    2013-01-01

    Wireless Sensor Networks (WSNs) are networks of sensor nodes deployed over a geographical area to perform a specific task. WSNs pose many design challenges. Energy conservation is one such design issue. In literature a wide range of solutions addressing this issue have been proposed. Generally WSNs are densely deployed. Thus the nodes with the close proximity are more likely to have the same data. Transmission of such non-aggregated data may lead to an inefficient energy management. Hence the data fusion has to be performed at the nodes so as to combine the edundant information into a single data unit. Distributed Source Coding is an efficient approach in achieving this task. In this paper an attempt has been made in modeling such a system. Various energy efficient codes were considered for the analysis. System performance in terms of energy efficiency has been made.

  2. The energetic playground : A feasibility study applying energy sources on a Playground: Green Energy alternatives

    OpenAIRE

    Rey-Siso, Daniel

    2016-01-01

    This thesis aims to study the feasibility of using energy generated by the physical activity of children playing in playgrounds. More particular, the goal is to generate clean energy by playing games and showing them the effort about how energy is produced. The ease of turning on lights or using electrical appliance by simply pushing one button causes unawareness of the actual effort and negative impacts of the generation, transmission and distribution behind energy sourcing. The idea of t...

  3. Legislative and policy in energy efficient designing and renewable energy sources: Application in Serbia

    OpenAIRE

    Pucar Mila; Nenković-Riznić Marina

    2007-01-01

    This paper analyses political and legislative frames in the field of energy efficient building and renewable energy sources in planning and implementation in Serbia. „Development strategy until 2015.“ is reviewed in concise portrait. This strategy maps a way for the application of energy services of much higher quality than ones offered at a present day. It reviews relevant laws concerning the subject, as well as institutions, programs and their implementation. Basic principles of energy poli...

  4. European Union's renewable energy sources and energy efficiency policy review. The Spanish perspective

    Energy Technology Data Exchange (ETDEWEB)

    De Alegria Mancisidor, Itziar Martinez; Diaz de Basurto Uraga, Pablo; Ruiz de Arbulo Lopez, Patxi [Departamento de Organizacion de Empresas, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (Spain); Martinez de Alegria Mancisidor, Inigo [Departamento de Electronica y Telecomunicaciones, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (Spain)

    2009-01-15

    The European Union's (EU) energy objectives, legislation and programmes are determinant for the current strategy for the promotion of renewable energy sources (RES) and energy efficiency (EE) in Spain, which is becoming a key element for its international competitiveness. Firstly, this article explores the evolution of the EU's energy strategy, focusing on the adopted legislations and programmes to promote RES and EE. It concludes with an analysis of the impact of those measures in Spain. (author)

  5. European Union's renewable energy sources and energy efficiency policy review. The Spanish perspective

    International Nuclear Information System (INIS)

    The European Union's (EU) energy objectives, legislation and programmes are determinant for the current strategy for the promotion of renewable energy sources (RES) and energy efficiency (EE) in Spain, which is becoming a key element for its international competitiveness. Firstly, this article explores the evolution of the EU's energy strategy, focusing on the adopted legislations and programmes to promote RES and EE. It concludes with an analysis of the impact of those measures in Spain. (author)

  6. Investigation and usage of renewable energy sources. First conference proceedings

    International Nuclear Information System (INIS)

    The conference was devoted to sustainable development promotion in Estonia. Modern lifestyle and outstanding technical achievements are strongly based on usage of fossil energy sources, especially oil products. Development demands an increasing amount of energy, but the supplies of non-renewable natural resources are limited. Moreover, their usage pollutes the environment and conveys vital oxygen out of the atmosphere. Due to supplies run out the production of fossil fuels will inevitably decrease already after 20 years. The same is likely to happen with Estonian oil shale resources, which is not only a fuel for electric power stations, but also an important staple of chemical industry. And after the rise of oil prices and its fall in market share, oil shale will have even greater value. To satisfy mankind's energy demand we have to take solar energy and processes started by solar (wind, flowing water, synthesis of plants biomass) more into use. The spread of their usage is determined by natural and social situation of the region, and economic expediency. Although rapid growth in using renewable energy sources has started, it will take decades to raise their share over half of total energy use. Estonia has chosen the path of sustainable development, which should guarantee development and healthy environment also in the farther future. There are great solar and wind energy resources plus good assumptions for producing biomass in Estonia. However, for efficient use of national natural resources we need more knowledge and skills, people with environment friendly attitude and extensive scientific, technical and applied investigations. In addition we have to advance sensible international cooperation as well as national industry of this field. The technical progress concerning renewable energy usage has a long way to go, which could apply also Estonians

  7. PROSPECTS OF ENERGY EFFICIENCY IMPROVEMENT AND DEVELOPMENT OF THE RENEWABLE ENERGY SOURCES IN PROVINCE OF VOJVODINA

    Energy Technology Data Exchange (ETDEWEB)

    Gvozdenac, D.; Ciric, R.; Tesic, M.

    2007-07-01

    The paper presents the outcome of the research in the field of energy efficiency improvement and development of the renewable energy sources in province of Vojvodina (Serbia). The summarized results of the paper are: - Potentials for energy efficiency improvement in Vojvodina, - Potentials for development of renewable energy sources in Vojvodina, - Proposal of measures of the energy policy for the promotion of research and development (R and D) which will use local scientific and technical potentials in the field of renewable energy sources and energy efficiency and improve the sustainability on the long run. - Proposal of measures for the energy policy in the domain of renewable energy sources development and energy efficiency and estimation of potentials for improvements by applying proposed measures in order to accomplish established tasks. - Synthesizing findings and proposals in the Action Plan of the Executive Council of the Autonomous Province of Vojvodina for the realization of the medium term program as well as the establishment of the monitoring plan for the assessment of program objectives progress. (auth)

  8. Piezoelectric Energy Harvesting Devices: An Alternative Energy Source for Wireless Sensors

    Directory of Open Access Journals (Sweden)

    Action Nechibvute

    2012-01-01

    Full Text Available The recent advances in ultralow power device integration, communication electronics, and microelectromechanical systems (MEMS technology have fuelled the emerging technology of wireless sensor networks (WSNs. The spatial distributed nature of WSNs often requires that batteries power the individual sensor nodes. One of the major limitations on performance and lifetime of WSNs is the limited capacity of these finite power sources, which must be manually replaced when they are depleted. Moreover, the embedded nature of some of the sensors and hazardous sensing environment make battery replacement very difficult and costly. The process of harnessing and converting ambient energy sources into usable electrical energy is called energy harvesting. Energy harvesting raises the possibility of self-powered systems which are ubiquitous and truly autonomous, and without human intervention for energy replenishment. Among the ambient energy sources such as solar energy, heat, and wind, mechanical vibrations are an attractive ambient source mainly because they are widely available and are ideal for the use of piezoelectric materials, which have the ability to convert mechanical strain energy into electrical energy. This paper presents a concise review of piezoelectric microgenerators and nanogenerators as a renewable energy resource to power wireless sensors.

  9. THE INVESTMENT PROBLEMATIC FOR PRODUCING ENERGY FROM RENEWABLE SOURCES IN ROMANIA

    OpenAIRE

    Marius Gavriletea; Mihaela Gavriletea

    2009-01-01

    The higher energy consumption, the increasing of the price for primary energy sources and the continuous worldwide debates for carbon emission in the atmosphere determined the reorientation to energy production from renewable sources (biomass, solar energy, wind, hydro, geothermal etc). Taking into account the low capacity that produce energy from renewable sources, we conclude that there are needed important investment in this sector.

  10. Sustainability of hydropower as source of renewable and clean energy

    Science.gov (United States)

    Luis, J.; Sidek, L. M.; Desa, M. N. M.; Julien, P. Y.

    2013-06-01

    Hydroelectric energy has been in recent times placed as an important future source of renewable and clean energy. The advantage of hydropower as a renewable energy is that it produces negligible amounts of greenhouse gases, it stores large amounts of electricity at low cost and it can be adjusted to meet consumer demand. This noble vision however is becoming more challenging due to rapid urbanization development and increasing human activities surrounding the catchment area. Numerous studies have shown that there are several contributing factors that lead towards the loss of live storage in reservoir, namely geology, ground slopes, climate, drainage density and human activities. Sediment deposition in the reservoir particularly for hydroelectric purposes has several major concerns due to the reduced water storage volume which includes increase in the risk of flooding downstream which directly effects the safety of human population and properties, contributes to economic losses not only in revenue for power generation but also large capital and maintenance cost for reservoir restorations works. In the event of functional loss of capabilities of a hydropower reservoir as a result of sedimentation or siltation could lead to both economical and environmental impact. The objective of this paper is aimed present the importance of hydropower as a source of renewable and clean energy in the national energy mix and the increasing challenges of sustainability.

  11. Comparing the health impacts of different energy sources

    International Nuclear Information System (INIS)

    Assessing health impacts of different energy sources requires synthesis of research results from many different disciplines into a rational framework. Information is often scanty; qualitatively different risks, or energy systems with substantially different end uses, must be put on a common footing. Historically institutional constraints have inhibited agencies from making incisive intercomparisons necessary for formulating energy policy; this has exacerbated public controversy over appropriate energy sources. Risk assessment methods reviewed include examples drawn from work of the Biomedical and Environmental Assessment Division at Brookhaven National Laboratory and elsewhere. Uncertainty over the mechanism and size of air pollution health damage is addressed through a probabilistic health-damage function, using sulphate-particle exposure as an indicator. This facilitates intercomparison through analysis of each step in the whole fuel cycle between a typical coal and nuclear power plant. Occupational health impacts, a significant fraction of overall damage, are illustrated by accident trends in coal-mining. In broadening comparisons to include new technologies, one must include the impact of manufacturing the energy-producing device as part of an expanded fuel cycle, via input/output methods. Throughout the analysis, uncertainties must be made explicit in the results, including uncertainty of data and uncertainty in choice of appropriate models and methods. No single method of comparative risk assessment is fully satisfactory; each has its limitations. Several methods must be compared if decision-making is to be realistic. (author)

  12. Biogas : Animal Waste That Can be Alternative Energy Source

    Directory of Open Access Journals (Sweden)

    Tuti Haryati

    2006-09-01

    Full Text Available Biogas is a renewable energy which can be used as alternative fuel to replace fossil fuel such as oil and natural gas . Recently, diversification on the use of energy has increasingly become an important issue because the oil sources are depleting . Utilization of agricultural wastes for biogas production can minimize the consumption of commercial energy source such as kerosene as well as the use of firewood . Biogas is generated by the process of organic material digestion by certain anaerobe bacteria activity in aerobic digester . Anaerobic digestion process is basically carried out in three steps i.e. hydrolysis, acidogenic and metanogenic . Digestion process needs certain condition such as C : N ratio, temperature, acidity and also digester design . Most anaerobic digestions perform best at 32 - 35°C or at 50 - 55°C, and pH 6 .8 - 8 . At these temperatures, the digestion process essentially converts organic matter in the present of water into gaseous energy . Generally, biogas consists of methane about 60 - 70% and yield about 1,000 British Thermal Unit/ft 3 or 252 Kcal/0.028 m3 when burned . In several developing countries, as well as in Europe and the United States, biogas has been commonly used as a subtitute environmental friendly energy . Meanwhile, potentially Indonesia has abundant potential of biomass waste, however biogas has not been used maximally .

  13. Biomass as an energy source: an Asian-Pacific perspective

    International Nuclear Information System (INIS)

    Biomass is the most commonly used renewable source of energy in the region covered by the Economic and Social Commission for Asia and the Pacific, making up an average of 50% of energy supplies in the developing countries. However, experience over the past one and a half decades in rural energy supply in the ESCAP region suggests that biomass resources are unlikely to compete with conventional supplies in meeting expanded rural energy needs for fuel, electricity and fertilizers. Nevertheless, biomass, especially wood and agricultural residues, will remain the main energy source in most countries of the region for the next two decades. The development of biomass energy systems in the ESCAP region is at different stages for different types of biomass resources. Efforts have been concentrated in six areas: direct combustion, gasification, co-generation, anaerobic digestion, densification and dendrothermal processes. Among the biomass technologies presently being promoted in the region, biogas and cooking stove programmes are the largest in terms of scale, operations and coverage. Co-generation is promising as its economic advantages make it attractive to industrial consumers, particularly the booming food and fibre production and processing industries, which produce enough biomass feedstock to warrant installing co-generation facilities. Despite its potential, the production of liquid fuel from energy crops is presently taking place in only a few countries. The major constraints on extending the use of biomass include the difficulty of assessing resources, poor local acceptance of technology (mainly for social and economic reasons), lack of financial resources and manpower, environmental concerns, the absence of up-to-date local technology and the lack of after-sales services. Appropriate technologies to develop and harness the region's vast biomass resource base to augment energy supplies, particularly in rural areas, has been a major issue in the developing

  14. Consideration on a Low Power Solar Energy Renewable Source

    Directory of Open Access Journals (Sweden)

    Andrei Marusca

    2008-05-01

    Full Text Available This paper presents the contribution of theauthors regarding the implementation of a low powersolar energy renewable source. To optimize theconversion efficiency of the solar irradiance intoelectrical energy an embedded system was designed. Theembedded system can accomplish the maximum powerpoint tracking by evaluation the output voltage andcurrent of the photovoltaic panels and calculate a propercommand for the DC-DC converter of the renewablesource. The key device in this system is a midrange 8 bitmicrocontroller that consists of acquisition, commandand control integrated hardware resources.

  15. International Standards to Develop and Promote Energy Efficiency and Renewable Energy Sources

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-07-01

    International Standards are a powerful tool for disseminating new technologies and good practices, developing global markets and supporting the harmonization of government policies on energy efficiency and renewable sources on a global scale.

  16. Consumption dynamics of primary-energy sources: The century of alternative energies

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira Matias, Joao Carlos de; Devezas, Tessaleno Campos [Department of Electromechanical Engineering, University of Beira Interior, P-6201-001 Covilha (Portugal)

    2007-07-15

    The present article characterizes economically and socially the two past centuries, focusing the consumption development of several primary-energy sources, linking it with this century's reality. The main objective is to demonstrate the relationship between the substitution process of primary-energy sources and the socio-economic development. Our analysis focuses on four technological transformations that have already occurred, emphasizing some aspects of present technological transformations. Thus, the role of primary-energy sources in the development of each long economic wave is analysed, as well as its geopolitical, commercial and social importance. Finally, bearing in mind the past dynamics associated with long structural waves, and making use of technological forecasting tools (Logistic Substitution and Delphi Technique), a future perspective is presented in which the substitution process points toward alternative-energy sources. (author)

  17. Overcoming High Energy Backgrounds at Pulsed Spallation Sources

    CERN Document Server

    Cherkashyna, Nataliia; DiJulio, Douglas D.; Khaplanov, Anton; Pfeiffer, Dorothea; Scherzinger, Julius; Cooper-Jensen, Carsten P.; Fissum, Kevin G.; Ansell, Stuart; Iverson, Erik B.; Ehlers, Georg; Gallmeier, Franz X.; Panzner, Tobias; Rantsiou, Emmanouela; Kanaki, Kalliopi; Filges, Uwe; Kittelmann, Thomas; Extegarai, Maddi; Santoro, Valentina; Kirstein, Oliver; Bentley, Phillip M.

    2015-01-01

    Instrument backgrounds at neutron scattering facilities directly affect the quality and the efficiency of the scientific measurements that users perform. Part of the background at pulsed spallation neutron sources is caused by, and time-correlated with, the emission of high energy particles when the proton beam strikes the spallation target. This prompt pulse ultimately produces a signal, which can be highly problematic for a subset of instruments and measurements due to the time-correlated properties, and different to that from reactor sources. Measurements of this background have been made at both SNS (ORNL, Oak Ridge, TN, USA) and SINQ (PSI, Villigen, Switzerland). The background levels were generally found to be low compared to natural background. However, very low intensities of high-energy particles have been found to be detrimental to instrument performance in some conditions. Given that instrument performance is typically characterised by S/N, improvements in backgrounds can both improve instrument pe...

  18. Materials and neutronic research at the Low Energy Neutron Source

    Science.gov (United States)

    Baxter, David V.

    2016-04-01

    In the decade since the Low Energy Neutron Source (LENS) at Indiana University Center for Exploration of Energy and Matter (CEEM) produced its first neutrons, the facility has made important contributions to the international neutron scattering community. LENS employs a 13MeV proton beam at up to 4kW beam power onto one of two Be targets to produce neutrons for research in fields ranging from radiation effects in electronics to studies of the structure of fluids confined in nanoporous materials. The neutron source design at the heart of LENS facilitates relatively rapid hands-on access to most of its components which provides a foundation for a research program in experimental neutronics and affords numerous opportunities for novel educational experiences. We describe in some detail a number of the unique capabilities of this facility.

  19. Directory of financing sources for foreign energy projects

    Energy Technology Data Exchange (ETDEWEB)

    La Ferla, L. [La Ferla Associates, Washington, DC (United States)

    1995-09-01

    The Office of National Security Policy has produced this Directory of Financing Sources for Foreign Energy Projects. The Directory reviews programs that offer financing from US government agencies, multilateral organizations, public, private, and quasi-private investment funds, and local commercial and state development banks. The main US government agencies covered are the US Agency for International Development (USAID), the Export-Import Bank of the US (EXIM Bank), Overseas Private Investment Corporation (OPIC), US Department of Energy, US Department of Defense, and the US Trade and Development Agency (TDA). Other US Government Sources includes market funds that have been in part capitalized using US government agency funds. Multilateral organizations include the World Bank, International Finance Corporation (IFC), Asian Development Bank (ADB), European Bank for Reconstruction and Development (EBRD), and various organizations of the United Nations. The Directory lists available public, private, and quasi-private sources of financing in key emerging markets in the Newly Independent States and other developing countries of strategic interest to the US Department of Energy. The sources of financing listed in this directory should be considered indicative rather than inclusive of all potential sources of financing. Initial focus is on the Russian Federation, Ukraine, india, China, and Pakistan. Separate self-contained sections have been developed for each of the countries to enable the user to readily access market-specific information and to support country-specific Departmental initiatives. For each country, the directory is organized to follow the project life cycle--from prefeasibility, feasibility, project finance, cofinancing, and trade finance, through to technical assistance and training. Programs on investment and export insurance are excluded.

  20. Did high energy astrophysical sources contribute to Martian atmospheric loss?

    CERN Document Server

    Atri, Dimitra

    2016-01-01

    Mars is believed to have had a substantial atmosphere in the past. Atmospheric loss led to depressurization and cooling, and is thought to be the primary driving force responsible for the loss of liquid water from its surface. Recently, MAVEN observations have provided new insight into the physics of atmospheric loss induced by ICMEs and solar wind interacting with the Martian atmosphere. In addition to solar radiation, it is likely that its atmosphere has been exposed to radiation bursts from high-energy astrophysical sources which become highly probable on timescales of ~Gy and beyond. These sources are capable of significantly enhancing the rates of photoionization and charged particle-induced ionization in the upper atmosphere. Here, we explore the possibility of damage from Galactic Gamma Ray Bursts, nearby supernovae, encounter with dense interstellar clouds and extreme solar events. We use Monte Carlo simulations to model the interaction of charged particles and photons from astrophysical sources in th...

  1. Optimization of Gas Supply of CHP Sources of Energy

    OpenAIRE

    Odiņeca, T; Zēbergs, V

    2008-01-01

    The article contains reviews the method of optimization of gas supply of CHP sources of energy - the method of calculation of permissible IRR. It is effective for analyzing the projects of CHP plants’ gasification (also in reconstruction of existing boiler houses). IRR is an effective criterion of profitability of gasification, if the forecast of the consumption of gas is precise. Using the method of calculation of permissible IRR it is possible to find the load limits in which CH...

  2. Impact of Renewable Energy Sources Penetration in a Microgrid

    OpenAIRE

    N. Ravi,; Y. Sumanth

    2014-01-01

    Recently, several types of Distributed Generators (DGs) have been connected together to form a small power system called a microgrid (MG). MG usually operates in normal connecting mode and is connected to the main grid. This paper presents the performance enhancement of microgrid with RES (Renewable Energy Sources) penetration in grid connected and islanded operation, and also shows the effect of wind and solar penetration individually and as well as coupled along with backup ...

  3. Prioritizing Energy Sources to Generate Electricity (Application of Fuzzy Logic)

    OpenAIRE

    Bahareh Hashemlou; Hossein Sadeghi; Arashk Masaeli; Mohammadhadi Hajian; Shima Javaheri

    2015-01-01

    Organizations, institutions, and different sectors of manufacturing, services and agriculture are constantly making decisions. Each of the aforementioned sectors, have strategies, tactics, and various functions that play a basic role in reaching the objectives. On the other hand, energy demand in developing countries is increasing day by day. The exact calculation of the cost per unit of electricity generated by power plants is not easy. Therefore, this study according to four sources of natu...

  4. Influence of Renewable Energy Sources on Distribution Network Availability

    OpenAIRE

    Mikulec, Ana; Mikuličić, Vladimir

    2011-01-01

    This paper gives a brief overview of production facilities from renewable energy sources which especially influence the power system with variable production. The paper describes some basic ways of connection and technical data relevant for the design of production plants, as well as the most important influences on the power system, especially with respect to the following: voltage, short circuit current, operation of the system, losses and power quality. Basic concepts of reliability, mathe...

  5. High-energy gamma radiation from extragalactic radio sources

    Science.gov (United States)

    Dermer, C. D.; Schlickeiser, R.; Mastichiadis, A.

    1992-01-01

    We propose that the important relationship between 3C 273 and 3C 279, the first two extragalactic sources detected at over 100 MeV energies, is their superluminal nature. In support of this conjecture, we propose a kinematic focusing mechanism, based on Compton scattering of accretion-disk photons by relativistic nonthermal electrons in the jet, that preferentially emits gamma rays in the superluminal direction.

  6. Ion sources for energy extremes of ion implantation.

    Science.gov (United States)

    Hershcovitch, A; Johnson, B M; Batalin, V A; Kropachev, G N; Kuibeda, R P; Kulevoy, T V; Kolomiets, A A; Pershin, V I; Petrenko, S V; Rudskoy, I; Seleznev, D N; Bugaev, A S; Gushenets, V I; Litovko, I V; Oks, E M; Yushkov, G Yu; Masunov, E S; Polozov, S M; Poole, H J; Storozhenko, P A; Svarovski, A Ya

    2008-02-01

    For the past four years a joint research and development effort designed to develop steady state, intense ion sources has been in progress with the ultimate goal to develop ion sources and techniques that meet the two energy extreme range needs of meV and hundreads of eV ion implanters. This endeavor has already resulted in record steady state output currents of high charge state of antimony and phosphorus ions: P(2+) [8.6 pmA (particle milliampere)], P(3+) (1.9 pmA), and P(4+) (0.12 pmA) and 16.2, 7.6, 3.3, and 2.2 pmA of Sb(3+)Sb(4+), Sb(5+), and Sb(6+) respectively. For low energy ion implantation, our efforts involve molecular ions and a novel plasmaless/gasless deceleration method. To date, 1 emA (electrical milliampere) of positive decaborane ions was extracted at 10 keV and smaller currents of negative decaborane ions were also extracted. Additionally, boron current fraction of over 70% was extracted from a Bernas-Calutron ion source, which represents a factor of 3.5 improvement over currently employed ion sources.

  7. Hydrogen is an energy source for hydrothermal vent symbioses.

    Science.gov (United States)

    Petersen, Jillian M; Zielinski, Frank U; Pape, Thomas; Seifert, Richard; Moraru, Cristina; Amann, Rudolf; Hourdez, Stephane; Girguis, Peter R; Wankel, Scott D; Barbe, Valerie; Pelletier, Eric; Fink, Dennis; Borowski, Christian; Bach, Wolfgang; Dubilier, Nicole

    2011-08-11

    The discovery of deep-sea hydrothermal vents in 1977 revolutionized our understanding of the energy sources that fuel primary productivity on Earth. Hydrothermal vent ecosystems are dominated by animals that live in symbiosis with chemosynthetic bacteria. So far, only two energy sources have been shown to power chemosynthetic symbioses: reduced sulphur compounds and methane. Using metagenome sequencing, single-gene fluorescence in situ hybridization, immunohistochemistry, shipboard incubations and in situ mass spectrometry, we show here that the symbionts of the hydrothermal vent mussel Bathymodiolus from the Mid-Atlantic Ridge use hydrogen to power primary production. In addition, we show that the symbionts of Bathymodiolus mussels from Pacific vents have hupL, the key gene for hydrogen oxidation. Furthermore, the symbionts of other vent animals such as the tubeworm Riftia pachyptila and the shrimp Rimicaris exoculata also have hupL. We propose that the ability to use hydrogen as an energy source is widespread in hydrothermal vent symbioses, particularly at sites where hydrogen is abundant. PMID:21833083

  8. Legislative and policy in energy efficient designing and renewable energy sources: Application in Serbia

    Directory of Open Access Journals (Sweden)

    Pucar Mila

    2007-01-01

    Full Text Available This paper analyses political and legislative frames in the field of energy efficient building and renewable energy sources in planning and implementation in Serbia. „Development strategy until 2015.“ is reviewed in concise portrait. This strategy maps a way for the application of energy services of much higher quality than ones offered at a present day. It reviews relevant laws concerning the subject, as well as institutions, programs and their implementation. Basic principles of energy policy in Serbia and their achievement are also given by that strategy. Serbia's energy policies are designed to allow new legislative, structural, organizational, institutional, and economic frames and visions of unification of Serbian energetics into regional and Pan-European integrations. One of the key factors is the inclusion of sustainable development and energy efficient design concerned policies. Application of these, almost completely neglected, energy sources, for which there is high potential in Serbia, would allow preservation of primary energy sources and local environment. This potential hasn't seen significant research, and therefore, neither the technical improvement. Apart from that, one of the goals of wider application of renewable energy sources is lowering the poverty level. This helps avoiding the already used “dirty development” method. .

  9. ENERGY ECONOMICS AND POLICY OF RENEWABLE ENERGY SOURCES IN THE EUROPEAN UNION

    Directory of Open Access Journals (Sweden)

    Wadim Strielkowski

    2013-10-01

    Full Text Available European Union adapted the policy of reducing its carbon footprint and embarked on the journey to shift to renewable energy sources in the early 1990s. The whole process started with implementations of binding rules that set up indicative targets for the EU Member States. However, this process had to go hand in hand with high energy costs charged to the consumers. This paper defines various types of renewable sources in the EU and analyses European legislation on renewable energy sources. In addition, it deals with the current situation regarding the energy policies in the European Union and outlines its main criticisms and prospects. The results and conclusions might be of some value for EU main energy providers as well as for the EU partners in the world.

  10. Energy sources for the next 35-50 years

    International Nuclear Information System (INIS)

    The next 35-50 years will be a period of great change around the world with respect to energy resources. Problems such as global warming, the loss of forests, the growth of the population and the availability of energy in various forms will become more urgent and will have to be faced. There is a vocal group which raises doubts regarding the overall effects of adding carbon dioxide to the atmosphere in large quantities in terms of global warming and are therefore not taking seriously the commitments made at the 1992 Rio Summit on the Environment and Development. These attitudes need to be challenged. Forests continue to be destroyed in certain areas to provide farmland and fuel for 1.25 billion people. The need for a strong reforestation programme is evident. The world population now at 5.3 billion, continues to grow and is predicted to reach 8.3 billion by 2030. Where will the additional 3 billion people find living space, fuelwood and food? There is also the need for much more energy, but the emphasis needs to be on sources which are renewable so that global warming is not enhanced. There is steady progress being made in the development of photovoltaic sources, their costs closely approaching traditional generating methods. A rapid acceleration in the application of these devices in the next decade is to be expected. Wind power is playing a larger role and hydropower continues to provide a significant portion of society's needs for energy along with nuclear power. The relative amounts of the total energy 'pie' which will be required will depend on the availability of power from each of these sources and the political pressures brought to bear as a result of environmental, sociological and resource availability factors

  11. The Potential of Renewable Energy Sources in Latvia

    Science.gov (United States)

    Sakipova, S.; Jakovics, A.; Gendelis, S.

    2016-02-01

    The article discusses some aspects of the use of renewable energy sources in the climatic conditions prevailing in most of the territory of Latvia, with relatively low wind speeds and a small number of sunny days a year. The paper gives a brief description of the measurement equipment and technology to determine the parameters of the outer air; the results of the measurements are also analysed. On the basis of the data obtained during the last two years at the meteorological station at the Botanical Garden of the University of Latvia, the energy potential of solar radiation and wind was estimated. The values of the possible and the actual amount of produced energy were determined.

  12. Renewable energy sources in the Mexican electrical sector

    Energy Technology Data Exchange (ETDEWEB)

    Rodriguez, V. [Univ. Nacional Autonoma de Mexico, Div. de Estudios de Postrado, Facultad de Ingenieria, Coyoacan (Mexico); Martinez, J.H. [Univ. Nacional Autonoma de Mexico, Posgrado en Estudios Latinoamericanos, Facultad de Filosofia y Letras, Div. de Estudios de Posgrado, Coyoacan (Mexico); Ruiz, B.J.

    2008-07-01

    This paper analyzes the role of the renewable energy sources (RES) in the Mexican electrical sector in the context of the proposed renewable energy bill currently under consideration in the Mexican Congress. This paper was divided in three parts. The first part consists of a chronology of institutional background related to RES. The second part is an analysis of the coordination and management system of the Mexican electrical sector, which can facilitate the promotion of RES without significant structural changes. Finally, the pros and cons of the renewable energy bill are analyzed in order to demonstrate the need for greater coherence between the bill and the coordination system. It is concluded that when inconsistency is eliminated, RES would strongly be promoted in Mexico. (orig.)

  13. Alternate Energy Sources for Thermalplastic Binding Agent Consolidation

    Energy Technology Data Exchange (ETDEWEB)

    Frame, B.J.

    1999-01-01

    A study was conducted to investigate microwave and electron beam technologies as alternate energy sources to consolidate fiber coated with a thermoplastic binding agent into preforms for composite molding applications. Bench experiments showed that both microwave and electron beam energy can produce heat sufficient to melt and consolidate a thermoplastic binding agent applied to fiberglass mat, and several two- and three-dimensional fiberglass preforms were produced with each method. In both cases, it is postulated that the heating was accomplished by the effective interaction of the microwave or electron beam energy with the combination of the mat preform and the tooling used to shape the preform. Both methods contrast with conventional thermal energy applied via infrared heaters or from a heated tool in which the heat to melt the thermoplastic binding agent must diffuse over time from the outer surface of the preform toward its center under a thermal gradient. For these reasons, the microwave and electron beam energy techniques have the potential to rapidly consolidate thick fiber preforms more efficiently than the thermal process. With further development, both technologies have the potential to make preform production more cost effective by decreasing cycle time in the preform tool, reducing energy costs, and by enabling the use of less expensive tooling materials. Descriptions of the microwave and electron beam consolidation experiments and a summary of the results are presented in this report.

  14. Prioritizing Energy Sources to Generate Electricity (Application of Fuzzy Logic

    Directory of Open Access Journals (Sweden)

    Bahareh Hashemlou

    2015-08-01

    Full Text Available Organizations, institutions, and different sectors of manufacturing, services and agriculture are constantly making decisions. Each of the aforementioned sectors, have strategies, tactics, and various functions that play a basic role in reaching the objectives. On the other hand, energy demand in developing countries is increasing day by day. The exact calculation of the cost per unit of electricity generated by power plants is not easy. Therefore, this study according to four sources of natural gas, nuclear energy, renewable energy and other fossil fuels other than natural gas that are used in a variety of electricity production plants is trying to clarify the ranking of generation electricity approach using "fuzzy preference relations" analysis. Accordingly, three models were used and the results showed that natural gas, with regard to the four criteria of low investment cost, low power, lack of pollution and the safety and reliability of electrical energy has priority over other alternatives. Full preferred model results also suggested that the energy of natural gas, renewable energies, nuclear and other fossil fuels should be considered in a priority for power generation. Sensitivity analysis results moreover demonstrated that the above models are not affected by the threshold values ​​and the full stability of the models is observed.

  15. Multi-port power electronic interface for renewable energy sources

    Science.gov (United States)

    Jiang, Wei

    Energy intensive products and services are penetrating people's daily life as well as different sectors of industry during recent decades. Further effort to improve efficiency, reduce green house gas and hazardous particle emission lead to the emergence of the "more electric" concept in several industries including transportation. This trend, however, burdens the aging power system and existing local power networks. To offer a remedy to the problem and a smooth transition to a more reliable, more diverse, and more efficient power grid of the future, the concept of Multi-port Power Electronic Interface (MPEI) for localized power processing is introduced in this dissertation, which interfaces and manages various sources, loads and storages. Different means of integrating multiple sources and storages into the existing power system are studied and evaluated; the six phase-leg structure is chosen to interface five sources/loads: fuel cell, wind turbine, solar cell, battery and utility grid. Partitioning of source-interface and load-interface on a system level as well as analysis and modeling on small signal level are performed. A novel control structure for source-interface is proposed in the design, which forms Controlled Quasi Current Source (CQCS) during the load sharing operation and offers several salient advantages: • Inherent average current-mode control. • Easy share of steady state current/power. • Share of load dynamics for better source protection. Local control loops for various input ports are designed based on linearized system model; controller performance is tuned to accommodate the characteristics of different sources. To maintain a sustainable operation, different modes of operation are defined for MPEI; detailed state-transition with associated events are also defined in each operation mode. Prototype of MPEI is built and control system is implemented digitally in a digital signal processor; steady state and transient performance of MPEI is

  16. AC Motor Drive Fed by Renewable Energy Sources with PWM

    Directory of Open Access Journals (Sweden)

    J. Pavalam

    2014-01-01

    Full Text Available In this fast aproaching nature of technology the ned of Electricity becomes a mandatory in developing technology. The ned of Electricity increases the power demand where the power demand met by the conventional sources of energy has some disadvantage of polution, this disadvantage can be decreased by the use of the Renewable energy sources like Fuel Cel and available solar energy. When a FUEL cel produces AC power, basicaly two stages are required for conversion first a bosting stage and second is inversion stage. In this paper the Bost inverter topology is achieved where in the conventional methods the normal DC - AC power conversion method is used where as in this paper the PWM based DC - AC inverter has ben used which is useful in reducing the harmonics in the output of the Inverter. The voltage controled output is produced in the bost inverter the curent controled output is taken from dc-dc bidirectional converter. The Fuel cel canot be relied as a whole so a Solar PV module is conected acros the Load so while the Sunlight days the PV arays generate power and in the night time the Fuel cel is used to generate power for the load. Since, the Fuel cel and PV arays can generate power in Partial load they are prefered than any other sources. When the output from the Solar PV aray is low or when the sunlight available is not eficient in generating the power a automatic switch over is provided in the junction betwen the Solar PV aray and Fuel cel so that whenever it hapens the switch automaticaly switch over to another source. The simulation results are presented to confirm the operational feature of the proposed system.

  17. OSeMOSYS: The Open Source Energy Modeling System

    International Nuclear Information System (INIS)

    This paper discusses the design and development of the Open Source Energy Modeling System (OSeMOSYS). It describes the model's formulation in terms of a 'plain English' description, algebraic formulation, implementation-in terms of its full source code, as well as a detailed description of the model inputs, parameters, and outputs. A key feature of the OSeMOSYS implementation is that it is contained in less than five pages of documented, easily accessible code. Other existing energy system models that do not have this emphasis on compactness and openness makes the barrier to entry by new users much higher, as well as making the addition of innovative new functionality very difficult. The paper begins by describing the rationale for the development of OSeMOSYS and its structure. The current preliminary implementation of the model is then demonstrated for a discrete example. Next, we explain how new development efforts will build on the existing OSeMOSYS codebase. The paper closes with thoughts regarding the organization of the OSeMOSYS community, associated capacity development efforts, and linkages to other open source efforts including adding functionality to the LEAP model. - Highlights: → OSeMOSYS is a new free and open source energy systems. → This model is written in a simple, open, flexible and transparent manner to support teaching. → OSeMOSYS is based on free software and optimizes using a free solver. → This model replicates the results of many popular tools, such as MARKAL. → A link between OSeMOSYS and LEAP has been developed.

  18. OSeMOSYS: The Open Source Energy Modeling System

    Energy Technology Data Exchange (ETDEWEB)

    Howells, Mark, E-mail: mark.i.howells@gmail.com [Royal Institute of Technology (KTH) (Sweden); Rogner, Holger [Planning and Economic Studies Section, International Atomic Energy Agency (Austria); Strachan, Neil [Energy Institute, University College London (United Kingdom); Heaps, Charles [Stockholm Environmental Institute (SEI) (United States); Huntington, Hillard [Stanford University (United States); Kypreos, Socrates [Paul Scherrer Institute (Switzerland); Hughes, Alison [Energy Research Centre, University of Cape Town (South Africa); Silveira, Semida [Royal Institute of Technology (KTH) (Sweden); DeCarolis, Joe [North Carolina State University (United States); Bazillian, Morgan [United Nations Industrial Development Organization (UNIDO) (Austria); Roehrl, Alexander [United Nations Department of Economic and Social Affairs (UNDESA) (United States)

    2011-10-15

    This paper discusses the design and development of the Open Source Energy Modeling System (OSeMOSYS). It describes the model's formulation in terms of a 'plain English' description, algebraic formulation, implementation-in terms of its full source code, as well as a detailed description of the model inputs, parameters, and outputs. A key feature of the OSeMOSYS implementation is that it is contained in less than five pages of documented, easily accessible code. Other existing energy system models that do not have this emphasis on compactness and openness makes the barrier to entry by new users much higher, as well as making the addition of innovative new functionality very difficult. The paper begins by describing the rationale for the development of OSeMOSYS and its structure. The current preliminary implementation of the model is then demonstrated for a discrete example. Next, we explain how new development efforts will build on the existing OSeMOSYS codebase. The paper closes with thoughts regarding the organization of the OSeMOSYS community, associated capacity development efforts, and linkages to other open source efforts including adding functionality to the LEAP model. - Highlights: > OSeMOSYS is a new free and open source energy systems. > This model is written in a simple, open, flexible and transparent manner to support teaching. > OSeMOSYS is based on free software and optimizes using a free solver. > This model replicates the results of many popular tools, such as MARKAL. > A link between OSeMOSYS and LEAP has been developed.

  19. Environmental impacts of energy utilization and environmental energy sources in Turkey

    International Nuclear Information System (INIS)

    Turkey is an energy importing country, more than half of the energy requirement has been supplied by imports. Domestic oil and lignite reserves are limited and lignites are characterised by high ash, sulfur and moisture content. Due to increasing energy consumption, air pollution is becoming a great environmental concern for the future in the country. In this regard, renewable energy resources appear to be the one of the most efficient and effective solutions for sustainable energy development and environmental pollution prevention in Turkey. Turkey's geographical location has several advantages for extensive use of most of these renewable energy sources. Because of this and the fact that it has limited fossil fuel resources, a gradual shift from fossil fuels to renewables seems to be serious and the sole alternative for Turkey. This article presents a review of the present energy situation and sustainability, technical and economical potential of renewable energy sources and future policies for energy sector in Turkey. Throughout the paper several problems relating to energy sources, environment and sustainable development are discussed from both current and future perspectives. (author)

  20. Panorama 2012 - Marine renewable energy sources: their place in energy policy, projects and players

    International Nuclear Information System (INIS)

    Marine energy sources are now a reality in the scientific landscape and, from now on, will be an increasingly important feature of the industry. Driven by public policy and renewable energy development targets, projects are multiplying, and industry players are jostling for maximum advantage in the first bidding rounds. (author)

  1. Energy sources and energy generation in the future; Fuentes de energia y la generacion del futuro

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez Pelegry, E.

    2001-07-01

    With this article, that gathers the conference imparted inside of the cycle Technologies and Power Supply Development: Gas or Coal, complementary alternatives, organized by the Spanish Club of the Energy (ENERCLUB), the author plants a series of questions over the sources of energy and the its generation in the future, in order to wake the reflections over the theme. (Author)

  2. Towards fusion energy as a sustainable energy source: Activities at DTU Physics

    DEFF Research Database (Denmark)

    Rasmussen, Jesper; Christensen, Alexander Simon; Dam, Magnus;

    2014-01-01

    a fusion plasma) and to confine it within magnetic fields. Learning how such plasmas behave and can be controlled is a crucial step towards realizing fusion as a sustainable energy source.At the Plasma Physics and Fusion Energy (PPFE) section at DTU Physics, we are exploring these issues,focusing on areas...

  3. Renewable energy sources. European Commission papers; Energies renouvelables. Documents de la Commission Europeenne

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-05-01

    The ''Directive on the Promotion of Electricity from Renewable Sources of Energy in the Internal Electricity Market'' was adopted in September 2001. Its purpose is to promote an increase in the contribution of renewable energy sources to electricity production in the internal market for electricity and to create a basis for a future Community framework. Energie-Cites provides in this document a summary of its opinion on the Green Paper and on Alterner II and gives a proposal for an Action Plan concerning the White Paper. (A.L.B.)

  4. Cyanate - An overlooked energy and nitrogen source in soils?

    Science.gov (United States)

    Mooshammer, Maria; Palatinszky, Márton; Herbold, Craig; Han, Ping; Daims, Holger; Richter, Andreas; Wagner, Michael

    2016-04-01

    Cyanate (NCO-) is a reduced nitrogen compound that is toxic to organisms due to its reactivity with nucleophilic groups in proteins. To lower cyanate concentrations within cells, a wide range of microorganisms possess a cyanase, which catalyzes the conversion of cyanate to ammonium and carbon dioxide. However, cyanate can also be useful for microbes by serving as a nitrogen source for cyanase-encoding microorganism, such as marine cyanobacteria (Kamennaya et al., 2008). Unexpectedly, we could recently demonstrate that at least one ammonia-oxidizing thaumarchaeote as well as nitrite-oxidizers thriving in consortia with ammonia-oxidizers can grow aerobically on cyanate as only energy and nitrogen source (Palatinszky et al., 2015). Furthermore, published metagenomes revealed that cyanase-encoding genes closely related to those of nitrifiers (ammonia- and nitrite-oxidizers) are widespread in the environment and encompass also cyanases affiliated with anammox organisms. Therefore, cyanate presumably presents an alternative nitrogen and also energy source for many microorganisms in aquatic and terrestrial environments. Surprisingly, cyanate concentrations and fluxes in natural environments are largely unknown, and environmental cyanate concentrations have only been studied in seawater so far, where it occurs in the nanomolar-range (Widner et al. 2013). No information about the importance of cyanate in soils is available, although urea that spontaneously decomposes to cyanate is the most used agricultural fertilizer on a global scale. Cyanate can have many fates in soils - it can be (1) used as nitrogen and/or energy source by cyanase-encoding microorganisms, (2) abiotically hydrolysed to ammonium and carbon dioxide, (3) adsorbed to soil particles, or (4) complexed with other compounds. Here we present the first measurements of cyanate concentrations in natural soils and results of experiments designed to differentiate between biotic and abiotic degradation of cyanate in

  5. Potentials for energy efficiency improvements and implementation of renewable energy sources in hotel industry in Macedonia

    OpenAIRE

    Cingoski, Vlatko

    2015-01-01

    In this presentation, potentials for energy efficiency improvements and implementation of renewable energy sources in hotel industry in Macedonia are discussed. This presentation was part of the research project entitled "Opportunities and Methods for Energy Substitution, Savings and Efficiency Improvements in the Hotel Industry" funded by the University "Goce Delcev", Stip, Macedonia. It was prsented at the joint workshop between University "Goce Delcev", Stip, Macedonia and the Bashkent Un...

  6. Energy Planning in Selected European Regions - Methods for Evaluating the Potential of Renewable Energy Sources

    OpenAIRE

    Sliz-Szkliniarz, Beata

    2012-01-01

    Given their potentially positive impact on climate protection and the preservation of fossil resources, alternative energy sources have become increasingly important for the energy supply over the past years. However, the questions arises what economic and ecological impacts and potential conflicts over land use resources are associated with the promotion of renewable energy production. Using the examples of three selected European Regions in Poland, France and German, the dissertation discus...

  7. A low-energy linear oxygen plasma source

    Energy Technology Data Exchange (ETDEWEB)

    Anders, Andre; Yushkov, Georgy Yu.

    2007-01-08

    A new version of a Constricted Plasma Source is described,characterized by all metal-ceramic construction, a linear slit exit of180 mm length, and cw-operation (typically 50 kHz) at an average power of1.5 kW. The plasma source is here operated with oxygen gas, producingstreaming plasma that contains mainly positive molecular and atomic ions,and to a much lesser degree, negative ions. The maximum total ion currentobtained was about 0.5 A. The fraction of atomic ions reached more than10 percent of all ions when the flow rate was less then 10 sccm O2,corresponding to a chamber pressure of about 0.5 Pa for the selectedpumping speed. The energy distribution functions of the different ionspecies were measured with a combinedmass spectrometer and energyanalyzer. The time-averaged distribution functions were broad and rangedfrom about 30eV to 90 eV at 200 kHz and higher frequencies, while theywere only several eV broad at 50 kHz and lower frequencies, with themaximum located at about 40 eV for the grounded anode case. This maximumwas shifted down to about 7 eV when the anode was floating, indicatingthe important role of the plasma potential for the ion energy for a givensubstrate potential. The source could be scaled to greater length and maybe useful for functionalization of surfaces and plasma-assisteddeposition of compound films.

  8. Multi-wavelength identification of high-energy sources

    CERN Document Server

    Mignani, R P

    2009-01-01

    The nature of most of the ~300 high-energy gamma-ray sources discovered by the EGRET instrument aboard the Gamma-ray Observatory (GRO) between 1991 and 1999 is one of the greatest enigmas in high-energy astrophysics. While about half of the extragalactic sources have been optically identified with Active Galactic Nuclei (AGN), only a meagre 10% of the galactic sources have a reliable identification. This low success rate has mainly to be ascribed to the local crowding of potential optical counterparts and to the large gamma-ray error boxes (of the order of one degree in radius) which prevented a straightforward optical identification. Indeed, a multi-wavelength identification strategy, based on a systematic coverage of the gamma-ray error boxes, has been the only do-able approach. The situation is now greatly improving thanks to the observations performed by the Fermi Gamma-ray Space Telescope which, thanks to the LAT instrument, provides a factor of 50 improvement in sensitivity and a factor of 10 improvemen...

  9. Testing SPI imaging of high-energy and extended sources

    Energy Technology Data Exchange (ETDEWEB)

    Vunderer, C.B.; Schonfelder, V.; Strong, A.W. [Max-Planck-Institut fuer Extraterrestrische Physik, Garching (Germany); Connell, P. [Birmingham Univ. (United Kingdom); Hammer, J.W. [Stuttgart Univ. (Germany). Inst. fuer Strahlenphysik

    2003-11-01

    INTEGRAL's main instruments employ coded apertures to obtain directional information on the incoming radiation. In order to experimentally better determine the imaging capabilities of the spectrometer SPI, the SPI Imaging Test Setup (SPITS) has been built at MPE. It consists of the SPI coded mask and two SPI-identical Ge detectors on an XY-table which allows us to move them to cover the 19 Ge detector positions. The SPI flight model imaging calibration only covered the energy range up to 2.7 MeV and did not include extended emission. SPITS was used to explore the performance of such a coded aperture system - combined with the SPI image analysis software - for higher-energy point sources and extended sources. We find that a 2.4 degrees diameter disk emitting 511 keV emission is reconstructed well. For the high signal-to-noise ratios of laboratory measurements, positions of point sources above 4 MeV could be reconstructed to better than 0.1 degrees. (authors)

  10. Can renewable and unconventional energy sources bridge the global energy gap in the 21st century?

    International Nuclear Information System (INIS)

    Energy experts project that global oil supplies will only meet demand until global oil production has peaked sometime between 2013 and 2020. Declining oil production after peak production will cause a global energy gap to develop, which will have to be bridged by unconventional and renewable energy sources. Nuclear, solar and hydrogen are destined to become major energy sources during the 21st century, but only if their enabling technologies improve significantly to ensure affordability and convenience of use. This paper will argue that global oil production will probably peak between 2004 and 2005, causing a serious energy gap to develop sometime between 2008 and 2010 rather than 2013-2020 as the energy experts projected. It will also argue that a transition from fossil fuels to renewable energy sources is inevitable. The paper will conclude, however, that fossil fuels with a growing contribution from nuclear energy, will still be supplying the major part of the global energy needs for most, perhaps all, of the 21st century. (author)

  11. CONCEPT OF THE MINIMUM ENERGY PASSENGER CAR WITH USE OF UNCONVENTIONAL ENERGY SOURCES

    Directory of Open Access Journals (Sweden)

    V. A. Gabrinets

    2014-06-01

    Full Text Available Purpose. The paper is aimed to consider the concept of creation of the minimum energy passenger car with use of nonconventional energy sources and the walls that have enhanced thermal insulation properties. Мethodology. The types of heat losses, as well as their value were analyzed. The alternative sources of energy are considered for heating. Their potential contribution to the overall energy balance of the passenger car is analyzed. Impact on the car design of the enhanced wall thermal insulation, solar energy inflow through the transparent windows and energy release of passengers are quantitatively evaluated. Findings. With the maximum possible use of all unconventional energy sources and the rational scheme solutions of conditioning and heating systems energy the costs for these needs for a passenger car can be reduced by 40-50%. Originality. New types of energy to maintain the heat balance of the car in the winter period is proposed to use firstly. New schematics solutions for environmental control system of the car both in winter and in summer periods were offered. Practical value. Introduction of the proposed scheme solutions and approaches to ensure the comfortable conditions for passengers may be implemented on an existing park of passenger cars and do not require a major re-equipment of systems that have already been installed.

  12. ECR ion source based low energy ion beam facility

    Indian Academy of Sciences (India)

    P Kumar; G Rodrigues; U K Rao; C P Safvan; D Kanjilal; A Roy

    2002-11-01

    Mass analyzed highly charged ion beams of energy ranging from a few keV to a few MeV plays an important role in various aspects of research in modern physics. In this paper a unique low energy ion beam facility (LEIBF) set up at Nuclear Science Centre (NSC) for providing low and medium energy multiply charged ion beams ranging from a few keV to a few MeV for research in materials sciences, atomic and molecular physics is described. One of the important features of this facility is the availability of relatively large currents of multiply charged positive ions from an electron cyclotron resonance (ECR) source placed entirely on a high voltage platform. All the electronic and vacuum systems related to the ECR source including 10 GHz ultra high frequency (UHF) transmitter, high voltage power supplies for extractor and Einzel lens are placed on a high voltage platform. All the equipments are controlled using a personal computer at ground potential through optical fibers for high voltage isolation. Some of the experimental facilities available are also described.

  13. Improved design of proton source and low energy beam transport line for European Spallation Source

    Energy Technology Data Exchange (ETDEWEB)

    Neri, L., E-mail: neri@lns.infn.it; Celona, L.; Gammino, S.; Mascali, D.; Castro, G.; Ciavola, G. [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy); Torrisi, G. [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy); Dipartimento di Ingegneria dell’Informazione, delle Infrastrutture e dell’Energia Sostenibile, Università Mediterranea di Reggio Calabria, Via Graziella, 89122 Reggio Calabria (Italy); Cheymol, B.; Ponton, A. [European Spallation Source ESS AB, Lund (Sweden); Galatà, A. [Laboratori Nazionali di Legnaro, Istituto Nazionale di Fisica Nucleare, Viale dell' università 2, 35020 Legnaro (Italy); Patti, G. [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy); Laboratori Nazionali di Legnaro, Istituto Nazionale di Fisica Nucleare, Viale dell' università 2, 35020 Legnaro (Italy); Gozzo, A.; Lega, L. [Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare, Via S. Sofia 62, 95123 Catania (Italy); Dipartimento di Ingegneria Informatica e delle Telecomunicazioni, Università degli Studi di Catania, Viale Andrea Doria 6, 95123 Catania (Italy)

    2014-02-15

    The design update of the European Spallation Source (ESS) accelerator is almost complete and the construction of the prototype of the microwave discharge ion source able to provide a proton beam current larger than 70 mA to the 3.6 MeV Radio Frequency Quadrupole (RFQ) started. The source named PS-ESS (Proton Source for ESS) was designed with a flexible magnetic system and an extraction system able to merge conservative solutions with significant advances. The ESS injector has taken advantage of recent theoretical updates and new plasma diagnostics tools developed at INFN-LNS (Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare). The design strategy considers the PS-ESS and the low energy beam transport line as a whole, where the proton beam behaves like an almost neutralized non-thermalized plasma. Innovative solutions have been used as hereinafter described. Thermo-mechanical optimization has been performed to withstand the chopped beam and the misaligned focused beam over the RFQ input collimator; the results are reported here.

  14. Improved design of proton source and low energy beam transport line for European Spallation Source

    Science.gov (United States)

    Neri, L.; Celona, L.; Gammino, S.; Mascali, D.; Castro, G.; Torrisi, G.; Cheymol, B.; Ponton, A.; Galatà, A.; Patti, G.; Gozzo, A.; Lega, L.; Ciavola, G.

    2014-02-01

    The design update of the European Spallation Source (ESS) accelerator is almost complete and the construction of the prototype of the microwave discharge ion source able to provide a proton beam current larger than 70 mA to the 3.6 MeV Radio Frequency Quadrupole (RFQ) started. The source named PS-ESS (Proton Source for ESS) was designed with a flexible magnetic system and an extraction system able to merge conservative solutions with significant advances. The ESS injector has taken advantage of recent theoretical updates and new plasma diagnostics tools developed at INFN-LNS (Laboratori Nazionali del Sud, Istituto Nazionale di Fisica Nucleare). The design strategy considers the PS-ESS and the low energy beam transport line as a whole, where the proton beam behaves like an almost neutralized non-thermalized plasma. Innovative solutions have been used as hereinafter described. Thermo-mechanical optimization has been performed to withstand the chopped beam and the misaligned focused beam over the RFQ input collimator; the results are reported here.

  15. A retarding field energy analyser to measure the energy distributions of liquid metal ion sources

    International Nuclear Information System (INIS)

    In this paper the setup and use of a retarding field energy analyser to measure the energy distribution of LMIS will be presented. An introduction in the technology and mechanism of LMIS will be given in chapter 2. The experimental configuration of the retarding field energy analyser, together with an error estimation and a computer program, to control the energy analyser and to calculate the energy distribution, will be discussed in chapter 3. To test the energy analyser an electron source, consisting of a tungsten thermoionic cathode, will be used. Energy distribution measurements of a gallium LMIS will be presented in chapter 4. Finally in chapter 5, the accuracy of the energy analyser and suggestions for improvement will be presented. (orig.)

  16. Status report on the Low Energy Neutron Source for 2015

    Science.gov (United States)

    Baxter, D. V.; Rinckel, T.

    2016-11-01

    The Low Energy Neutron Source at Indiana University first produced cold neutrons in April of 2005. Ten years after first reaching this milestone, the facility has three instruments in operation on its cold target station, and a second target station is devoted to thermal and fast neutron physics offers capabilities in radiation effects research (single-event effects in electronics) and radiography. Key elements in our success over these last ten years have been the diversity of activities we have been able maintain (which often involves using each of our instruments for multiple different activities), the close relationship we have developed with a number of major sources, and the focus we have had on innovation in neutron instrumentation. In this presentation, we will introduce some of the highlights from our most recent activities, provide an update on some of our technical challenges, and describe some of our ideas for the future.

  17. Molecular ion sources for low energy semiconductor ion implantation (invited).

    Science.gov (United States)

    Hershcovitch, A; Gushenets, V I; Seleznev, D N; Bugaev, A S; Dugin, S; Oks, E M; Kulevoy, T V; Alexeyenko, O; Kozlov, A; Kropachev, G N; Kuibeda, R P; Minaev, S; Vizir, A; Yushkov, G Yu

    2016-02-01

    Smaller semiconductors require shallow, low energy ion implantation, resulting space charge effects, which reduced beam currents and production rates. To increase production rates, molecular ions are used. Boron and phosphorous (or arsenic) implantation is needed for P-type and N-type semiconductors, respectively. Carborane, which is the most stable molecular boron ion leaves unacceptable carbon residue on extraction grids. A self-cleaning carborane acid compound (C4H12B10O4) was synthesized and utilized in the ITEP Bernas ion source resulting in large carborane ion output, without carbon residue. Pure gaseous processes are desired to enable rapid switch among ion species. Molecular phosphorous was generated by introducing phosphine in dissociators via 4PH3 = P4 + 6H2; generated molecular phosphorous in a pure gaseous process was then injected into the HCEI Calutron-Bernas ion source, from which P4(+) ion beams were extracted. Results from devices and some additional concepts are described. PMID:26932065

  18. Molecular ion sources for low energy semiconductor ion implantation (invited)

    Science.gov (United States)

    Hershcovitch, A.; Gushenets, V. I.; Seleznev, D. N.; Bugaev, A. S.; Dugin, S.; Oks, E. M.; Kulevoy, T. V.; Alexeyenko, O.; Kozlov, A.; Kropachev, G. N.; Kuibeda, R. P.; Minaev, S.; Vizir, A.; Yushkov, G. Yu.

    2016-02-01

    Smaller semiconductors require shallow, low energy ion implantation, resulting space charge effects, which reduced beam currents and production rates. To increase production rates, molecular ions are used. Boron and phosphorous (or arsenic) implantation is needed for P-type and N-type semiconductors, respectively. Carborane, which is the most stable molecular boron ion leaves unacceptable carbon residue on extraction grids. A self-cleaning carborane acid compound (C4H12B10O4) was synthesized and utilized in the ITEP Bernas ion source resulting in large carborane ion output, without carbon residue. Pure gaseous processes are desired to enable rapid switch among ion species. Molecular phosphorous was generated by introducing phosphine in dissociators via 4PH3 = P4 + 6H2; generated molecular phosphorous in a pure gaseous process was then injected into the HCEI Calutron-Bernas ion source, from which P4+ ion beams were extracted. Results from devices and some additional concepts are described.

  19. Computational methods for high-energy source shielding

    International Nuclear Information System (INIS)

    The computational methods for high-energy radiation transport related to shielding of the SNQ-spallation source are outlined. The basic approach is to couple radiation-transport computer codes which use Monte Carlo methods and discrete ordinates methods. A code system is suggested that incorporates state-of-the-art radiation-transport techniques. The stepwise verification of that system is briefly summarized. The complexity of the resulting code system suggests a more straightforward code specially tailored for thick shield calculations. A short guide line to future development of such a Monte Carlo code is given

  20. Designing and Testing Energy Harvesters Suitable for Renewable Power Sources

    Science.gov (United States)

    Synkiewicz, B.; Guzdek, P.; Piekarski, J.; Zaraska, K.

    2016-01-01

    Energy harvesters convert waste power (heat, light and vibration) directly to electric power . Fast progress in their technology, design and areas of application (e.g. “Internet of Things”) has been observed recently. Their effectiveness is steadily growing which makes their application to powering sensor networks with wireless data transfer reasonable. The main advantage is the independence from wired power sources, which is especially important for monitoring state of environmental parameters. In this paper we describe the design and realization of a gas sensor monitoring CO level (powered by TEG) and two, designed an constructed in ITE, autonomous power supply modules powered by modern photovoltaic cells.

  1. Quasars as Sources of Ultrahigh-Energy Cosmic Rays

    International Nuclear Information System (INIS)

    The results are presented that were obtained by analyzing arrival directions for cosmic rays that the Yakutsk array for studying extensive air showers recorded between 1974 and 2002 in the energy region E0 ≥5x1017 eV for zenith angles in the region θ ≤60 deg. . It is shown that quasars for which the redshift lies in the region z≤2.5 can be sources of these cosmic rays. Ordered structures are observed in the disposition of quasars and in the cosmic-ray arrival directions. These structures can be associated in one way or another with the large-scale structure of the Universe

  2. Prospects for inertial fusion as an energy source

    International Nuclear Information System (INIS)

    Progress in the Inertial Confinement Fusion (ICF) Program has been very rapid in the last few years. Target physics experiments with laboratory lasers and in underground nuclear tests have shown that the drive conditions necessary to achieve high gain can be achieved in the laboratory with a pulse-shaped driver of about 10 MJ. Requirements and designs for a Laboratory Microfusion Facility (LMF) have been formulated. Research on driver technology necessary for an ICF reactor is making progress. Prospects for ICF as an energy source are very promising. 11 refs., 5 figs

  3. Radiant Energy Power Source for Jet Aircraft. Final performance report

    Energy Technology Data Exchange (ETDEWEB)

    Doellner, O.L.

    1992-02-01

    This report beings with a historical overview on the origin and early beginnings of Radiant Energy Power Source for Jet Aircraft. The report reviews the work done in Phase I (Grant DE-FG01-82CE-15144) and then gives a discussion of Phase II (Grant DE-FG01-86CE-15301). Included is a reasonably detailed discussion of photovoltaic cells and the research and development needed in this area. The report closes with a historical perspective and summary related to situations historically encountered on projects of this nature. 15 refs.

  4. Fiscal Policy for Renewable Energy Sources and Its Economic Impact

    OpenAIRE

    Rita Helbra Tenrini; Sidiq Suryo Nugroho

    2014-01-01

    Indonesia is the largest producers of palm oil. Along with the increasing demand for renewable energy source, palm oil will turn to be a very important commodity in the future. The palm oil industry will gain more value-added if they export the commodities in processed materials rather than raw materials. On the other hands palm oil industry more likely to export raw material, because there’s no incentives for them to export processed materials. Therefore, to give an incentive to palm oil ind...

  5. The Optimal Use of Renewable Energy Sources-The Case of Lemnos Island

    DEFF Research Database (Denmark)

    Koroneos, C.; Xydis, George; Polyzakis, A.

    2012-01-01

    energy needs from Renewable Energy Sources taking into consideration a multiplicity of criteria such as environmental impacts, energy demand, energy cost, and resources availability. A series of solutions have resulted, based on deterministic model runs, providing decision makers the flexibility...

  6. Stochastic Optimal Scheduling of Residential Appliances with Renewable Energy Sources

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Hongyu; Pratt, Annabelle; Chakraborty, Sudipta

    2015-07-03

    This paper proposes a stochastic, multi-objective optimization model within a Model Predictive Control (MPC) framework, to determine the optimal operational schedules of residential appliances operating in the presence of renewable energy source (RES). The objective function minimizes the weighted sum of discomfort, energy cost, total and peak electricity consumption, and carbon footprint. A heuristic method is developed for combining different objective components. The proposed stochastic model utilizes Monte Carlo simulation (MCS) for representing uncertainties in electricity price, outdoor temperature, RES generation, water usage, and non-controllable loads. The proposed model is solved using a mixed integer linear programming (MILP) solver and numerical results show the validity of the model. Case studies show the benefit of using the proposed optimization model.

  7. The Spatial Planning for the Renewable Energy Sources in Greece

    Science.gov (United States)

    Baltas, E.

    2009-04-01

    This work defines the Special Framework for the Spatial Planning and Sustainable Development for the Renewable Energy Sources(RES) in Greece. This planning is very important for the development of the renewable energy because - Identifies criteria and guidelines for the location of RES projects, per RES category and type of geographic area, with emphasis on wind systems and hydropower units. - seeks to provide a clear framework to the competent authorities and the companies concerned, so be oriented suitably in terms of spatial installation areas and thus limit the ambiguities on land uses conflicts. - Determines the key prerequisites for the harmonisation and coherence between all other spatial and urban plans subject to the Special Framework for RES, contributing to the achievement of the targets set under national and EU policies with a further increase of RES participation to power supply.

  8. Electrochemical Energy Storage and Power Sources for NASA Exploration Missions

    Science.gov (United States)

    Baldwin, Richard S.

    2007-01-01

    An overview of NASA s electrochemical energy storage programs for NASA Exploration missions is being presented at the 10th Electrochemical Power Sources R&D Symposium, which is being held in Williamsburg, VA on August 20-23, 2007. This public domain venue, which is sponsored by the U.S. Navy and held every two years, serves as a forum for the dissemination of research and development results related to electrochemical energy storage technology programs that are currently being supported and managed within governmental agencies. Technology areas of primary interest include batteries, fuel cells, and both overview and focused presentations on such are given by both governmental and contractual researchers. The forum also provides an opportunity to assess technology areas of mutual interest with respect to establishing collaborative and/or complementary programmatic interactions.

  9. Energy scaling of terahertz-wave parametric sources.

    Science.gov (United States)

    Tang, Guanqi; Cong, Zhenhua; Qin, Zengguang; Zhang, Xingyu; Wang, Weitao; Wu, Dong; Li, Ning; Fu, Qiang; Lu, Qingming; Zhang, Shaojun

    2015-02-23

    Terahertz-wave parametric oscillators (TPOs) have advantages of room temperature operation, wide tunable range, narrow line-width, good coherence. They have also disadvantage of small pulse energy. In this paper, several factors preventing TPOs from generating high-energy THz pulses and the corresponding solutions are analyzed. A scheme to generate high-energy THz pulses by using the combination of a TPO and a Stokes-pulse-injected terahertz-wave parametric generator (spi-TPG) is proposed and demonstrated. A TPO is used as a source to generate a seed pulse for the surface-emitted spi-TPG. The time delay between the pump and Stokes pulses is adjusted to guarantee they have good temporal overlap. The pump pulses have a large pulse energy and a large beam size. The Stokes beam is enlarged to make its size be larger than the pump beam size to have a large effective interaction volume. The experimental results show that the generated THz pulse energy from the spi-TPG is 1.8 times as large as that obtained from the TPO for the same pumping pulse energy density of 0.90 J/cm(2) and the same pumping beam size of 3.0 mm. When the pumping beam sizes are 5.0 and 7.0 mm, the enhancement times are 3.7 and 7.5, respectively. The spi-TPG here is similar to a difference frequency generator; it can also be used as a Stokes pulse amplifier. PMID:25836452

  10. Energy scaling of terahertz-wave parametric sources.

    Science.gov (United States)

    Tang, Guanqi; Cong, Zhenhua; Qin, Zengguang; Zhang, Xingyu; Wang, Weitao; Wu, Dong; Li, Ning; Fu, Qiang; Lu, Qingming; Zhang, Shaojun

    2015-02-23

    Terahertz-wave parametric oscillators (TPOs) have advantages of room temperature operation, wide tunable range, narrow line-width, good coherence. They have also disadvantage of small pulse energy. In this paper, several factors preventing TPOs from generating high-energy THz pulses and the corresponding solutions are analyzed. A scheme to generate high-energy THz pulses by using the combination of a TPO and a Stokes-pulse-injected terahertz-wave parametric generator (spi-TPG) is proposed and demonstrated. A TPO is used as a source to generate a seed pulse for the surface-emitted spi-TPG. The time delay between the pump and Stokes pulses is adjusted to guarantee they have good temporal overlap. The pump pulses have a large pulse energy and a large beam size. The Stokes beam is enlarged to make its size be larger than the pump beam size to have a large effective interaction volume. The experimental results show that the generated THz pulse energy from the spi-TPG is 1.8 times as large as that obtained from the TPO for the same pumping pulse energy density of 0.90 J/cm(2) and the same pumping beam size of 3.0 mm. When the pumping beam sizes are 5.0 and 7.0 mm, the enhancement times are 3.7 and 7.5, respectively. The spi-TPG here is similar to a difference frequency generator; it can also be used as a Stokes pulse amplifier.

  11. The Use of Energy in Malaysia: Tracing Energy Flows from Primary Source to End Use

    OpenAIRE

    Chinhao Chong; Weidou Ni; Linwei Ma; Pei Liu; Zheng Li

    2015-01-01

    Malaysia is a rapidly developing country in Southeast Asia that aims to achieve high-income country status by 2020; its economic growth is highly dependent on its abundant energy resources, especially natural gas and crude oil. In this paper, a complete picture of Malaysia’s energy use from primary source to end use is presented by mapping a Sankey diagram of Malaysia’s energy flows, together with ongoing trends analysis of the main factors influencing the energy flows. The results indica...

  12. Energy policy. Technical developments, political strategies, and concepts of action regarding renewable energy sources and rational energy use

    International Nuclear Information System (INIS)

    This interdisciplinary study book deals with problems from the history of energy, energy sytems, energy engineering, and the potential of renewable energy sources: hydro and wind power, biomass, geothermal energy, photovoltaics and solar thermal conversion; the improvement of boundary conditions for their transfer to market; concepts of action and project funding preferences of the EU, USA and Japan in this sector; relevant activities of the federal German government and proposals by non-governmental players in the field as well as strategies for rational energy use; methods for building an energy consensus and criteria for valuating energy systems; concepts of action and proposals for extending solar energy use in the Mediterranean and Afrika, as well as political factors governing the market introduction and export promotion of renewable energy technologies in this triad: the USA, Japan, and the European Union. Seven of the papers contained in the book are individually recorded. (orig./RHM). 76 figs., 100 tabs

  13. Experimental investigation of jojoba as a renewable energy source

    Energy Technology Data Exchange (ETDEWEB)

    Al-Widyan, Mohamad I. [Mechanical Engineering Department, Jordan University of Science and Technology, PO Box 3030, Irbid 22110 (Jordan); Al-Muhtaseb, Mu' taz A. [Mechanical Engineering Department, Faculty of Engineering, University of Jordan, PO Box 961060, Amman 11196 (Jordan)

    2010-08-15

    This work examined jojoba (oil and cake) as possible alternative fuel sources. Jojoba is a shrub that grows very well in deserts and its cake is the solid part produced upon processing of the jojoba seeds for oil extraction. In this study, pure jojoba oil and 50/50 blends with diesel fuel were tested as fuels in a single cylinder diesel engine. The diesel fuel was the baseline of comparison throughout the runs. The cake was tested for both direct combustion (pellets) and as a substrate for biogas production. The pellets were formed by compacting the cake in cylindrical dies using a hydraulic press while the biogasification was conducted in an anaerobic digester model Bioflo 110 from Brunswick. The findings indicate that the optimum injection pressure for jojoba oil in the engine is 210 bars at which engine speed was maximum (2700 rpm), NO{sub x} and CO emissions as well as exhaust temperature were minimum. Using jojoba cake for biogasification resulted in a yield of about 600 ml biogas per 400 g of jojoba cake. Burning jojoba compacted cake (pellets) for direct combustion in a stove indicated that jojoba cake sustained a temperature in excess of 300 C for a reasonable amount of time and that the cake was very competitive to wood and has energy content more than most types of wood. Overall, it may be stated that both jojoba oil and cake hold real promise as alternative energy sources. (author)

  14. Laticiferous taxa as a source of energy and hydrocarbon

    Energy Technology Data Exchange (ETDEWEB)

    Marimuthu, S.; Subramanian, R.B.; Kothari, I.L.; Inamdar, J.A. (Sardar Patel Univ., Gujarat (India))

    Twenty-nine laticiferous taxa of Apocynaceae, Asclepiadaceae, and Sapotaceae were screened for suitability as alternative sources of renewable energy, rubber, and phytochemicals and to select the most promising ones for large-scale cultivation. Of these, Allamanda violacea (14.9% protein, 13.8% polyphenol, 8.6% oil, 3.2% hydrocarbon), Catharanthus roseus (15.4% protein, 10.4% polyphenol, 11.5% oil, 1.9% hydrocarbon), and Holarrhena antidysenterica (14.2% protein, 16.4% polyphenol, 5,4% oil, 4.8% hydrocarbon) of Apocynaceae; Asclepias curassavica (19.3% protein, 6.5% polyphenol, 3.9% oil, 2.0% hydrocarbon), Calotropis gigantea (18.5% protein, 6.8% polyphenol, 7.0% oil, 2.8% hydrocarbon) of Asclepiadaceae; Mimusops elengi (11.3% protein, 9.7% polyphenol, 7.2% oil, 4.0% hydrocarbon) of Sapotaceae show promising potential for future petrochemical plantations; of all these taxa, Holarrhena antidysenterica yielded an unusually high percentage (4.8%) of hydrocarbon fraction followed by Mimusops elengi (4.0%). NMR spectra confirmed the presence of cis-polyisoprene in all species studied except Nerium indicum (white-flowered var.). These data indicate that the majority of the species under investigation may be considered for large-scale cultivation as an alternative source of rubber, intermediate energy, and other phytochemicals.

  15. Experimental investigation of jojoba as a renewable energy source

    International Nuclear Information System (INIS)

    This work examined jojoba (oil and cake) as possible alternative fuel sources. Jojoba is a shrub that grows very well in deserts and its cake is the solid part produced upon processing of the jojoba seeds for oil extraction. In this study, pure jojoba oil and 50/50 blends with diesel fuel were tested as fuels in a single cylinder diesel engine. The diesel fuel was the baseline of comparison throughout the runs. The cake was tested for both direct combustion (pellets) and as a substrate for biogas production. The pellets were formed by compacting the cake in cylindrical dies using a hydraulic press while the biogasification was conducted in an anaerobic digester model Bioflo 110 from Brunswick. The findings indicate that the optimum injection pressure for jojoba oil in the engine is 210 bars at which engine speed was maximum (2700 rpm), NOx and CO emissions as well as exhaust temperature were minimum. Using jojoba cake for biogasification resulted in a yield of about 600 ml biogas per 400 g of jojoba cake. Burning jojoba compacted cake (pellets) for direct combustion in a stove indicated that jojoba cake sustained a temperature in excess of 300 deg. C for a reasonable amount of time and that the cake was very competitive to wood and has energy content more than most types of wood. Overall, it may be stated that both jojoba oil and cake hold real promise as alternative energy sources.

  16. Feasibility and impact analysis of a renewable energy source (RES)-based energy system in Korea

    International Nuclear Information System (INIS)

    In this study, we analyze the feasibility and impacts of a renewable energy source (RES)-based electricity supply system of future Korea. To achieve this goal, we first developed different scenarios for increasing the contribution of RES by lowering the rate of i) nuclear power, ii) thermal power, iii) both nuclear and thermal power, and iv) these scenarios with real-world constraints. Based on the generated scenarios, we then specified the established systems with practical strategies which encourage different renewable sources (wind, solar photovoltaic, biomass, and waste). Finally, we analyzed the impacts of the established RES-based systems according to various criteria: the total required cost, the dependence on imported energy, CO2 emissions, and land use. The results show that the RES-based system that utilizes wind energy as its main source by steadily decreasing the rate of thermal power for electricity generation is the most affordable for future Korean electricity system. We also identify the merits and drawbacks of the analyzed systems and provide relevant recommendations for the establishment of a sustainable energy system for Korea. These findings will support policy makers in integrating quantitative assessments into energy-related policy design and implementation. - Highlights: • We model and analyze RES-based electricity supply system in Korea. • Impact analysis includes: economic, energy security, environmental protection aspects. • We also evaluate different strategies to establish RES-based system. • We show that wind energy-based system is the most affordable for Korea

  17. Deep coal seams as a greener energy source: a review

    Science.gov (United States)

    Ranathunga, A. S.; Perera, M. S. A.; Ranjith, P. G.

    2014-12-01

    Today, coal and oil are the main energy sources used in the world. However, these sources will last for only a few decades. Hence, the investigation of possible energy sources to meet this crisis has become a crucial task. Coal bed methane (CBM) is a potential energy source which can be used to fulfil the energy demand. Since the amount of carbon dioxide (CO2) emitted to the atmosphere from the use of CBM is comparatively very low compared to conventional energy sources, it is also a potential mitigation option for global warming. This paper reviews CBM recovery techniques with particular emphasis on CO2-enhanced coal bed methane (CO2-ECBM) recovery. The paper reviews (1) conventional CBM recovery techniques and problems associated with them, (2) CBM production-enhancement methods, including hydro-fracturing and enhanced CBM recovery techniques, such as N2-ECBM and CO2-ECBM, (3) the importance of the CO2-ECBM technique compared to other methods and problems with it, (4) the effect of CO2 injection during the CO2-ECBM process on coal seam permeability and strength and (5) current CO2-ECBM field projects and their progress. Although conventional CBM recovery methods are simple (basically related to the drawdown of the reservoir pressure to release methane from it), they are inefficient for the recovery of a commercially viable amount of methane from coal seams. Therefore, to enhance methane production, several methods are used, such as hydro-fracturing and ECBM (N2-ECBM and CO2-ECBM). The CO2-ECBM process has a number of advantages compared to other methane recovery techniques, as it contributes to the mitigation of the atmospheric CO2 level, is safer and more economical. However, as a result of CO2 injection into the coal seam during the CO2-ECBM process, coal mass permeability and strength may be crucially changed, due to the coal matrix swelling associated with CO2 adsorption into the coal matrix. Both injecting CO2 properties (gas type, CO2 phase and pressure

  18. Deep coal seams as a greener energy source: a review

    International Nuclear Information System (INIS)

    Today, coal and oil are the main energy sources used in the world. However, these sources will last for only a few decades. Hence, the investigation of possible energy sources to meet this crisis has become a crucial task. Coal bed methane (CBM) is a potential energy source which can be used to fulfil the energy demand. Since the amount of carbon dioxide (CO2) emitted to the atmosphere from the use of CBM is comparatively very low compared to conventional energy sources, it is also a potential mitigation option for global warming. This paper reviews CBM recovery techniques with particular emphasis on CO2-enhanced coal bed methane (CO2-ECBM) recovery. The paper reviews (1) conventional CBM recovery techniques and problems associated with them, (2) CBM production-enhancement methods, including hydro-fracturing and enhanced CBM recovery techniques, such as N2-ECBM and CO2-ECBM, (3) the importance of the CO2-ECBM technique compared to other methods and problems with it, (4) the effect of CO2 injection during the CO2-ECBM process on coal seam permeability and strength and (5) current CO2-ECBM field projects and their progress. Although conventional CBM recovery methods are simple (basically related to the drawdown of the reservoir pressure to release methane from it), they are inefficient for the recovery of a commercially viable amount of methane from coal seams. Therefore, to enhance methane production, several methods are used, such as hydro-fracturing and ECBM (N2-ECBM and CO2-ECBM). The CO2-ECBM process has a number of advantages compared to other methane recovery techniques, as it contributes to the mitigation of the atmospheric CO2 level, is safer and more economical. However, as a result of CO2 injection into the coal seam during the CO2-ECBM process, coal mass permeability and strength may be crucially changed, due to the coal matrix swelling associated with CO2 adsorption into the coal matrix. Both injecting CO2 properties (gas type, CO2 phase and pressure

  19. Evaluating the sustainability of an energy supply system using renewable energy sources: An energy demand assessment of South Carolina

    Science.gov (United States)

    Green, Cedric Fitzgerald

    Sustainable energy is defined as a dynamic harmony between the equitable availability of energy-intensive goods and services to all people and the preservation of the earth for future generations. Sustainable energy development continues to be a major focus within the government and regulatory governing bodies in the electric utility industry. This is as a result of continued demand for electricity and the impact of greenhouse gas emissions from electricity generating plants on the environment by way of the greenhouse effect. A culmination of increasing concerns about climate change, the nuclear incident in Fukushima four years ago, and discussions on energy security in a world with growing energy demand have led to a movement for increasing the share of power generation from renewable energy sources. This work studies demand for electricity from primarily residential, commercial, agricultural, and industrial customers in South Carolina (SC) and its effect on the environment from coal-fired electricity generating plants. Moreover, this work studies sustainable renewable energy source-options based on the renewable resources available in the state of SC, as viable options to supplement generation from coal-fired electricity generating plants. In addition, greenhouse gas emissions and other pollutants from primarily coal-fired plants will be defined and quantified. Fundamental renewable energy source options will be defined and quantified based on availability and sustainability of SC's natural resources. This work studies the environmental, economic, and technical aspects of each renewable energy source as a sustainable energy option to replace power generation from coal-fired plants. Additionally, social aspect implications will be incorporated into each of the three aspects listed above, as these aspects are explored during the research and analysis. Electricity demand data and alternative energy source-supply data in SC are carried out and are used to develop and

  20. Renewable sources of energy in Africa: status of development and future contribution to the energy mix

    International Nuclear Information System (INIS)

    Renewable sources of energy in Africa are widely regarded as alternatives to fossil fuels. Being an abundant indigenous reserve, they offer considerable savings of foreign exchange. Also, they are usually regarded as environmentally friendly and thus do not contribute significantly to the greenhouse effect. However, present contributions of renewable energy to the African energy supply remain negligible despite substantial claims often made about the potential scope for renewable energy forms. This paper is based on a comprehensive study undertaken by the United Nations Economic Commission for Africa in 1993-94. The assessment of renewable energy contributions to the energy mix has been made based on data obtained from African countries. A formula reflecting new and renewable sources of energy (NRSE) utilisation was developed and an attempt was made to delineate some zones with identical patterns of utilisation. Some of the difficulties encountered in the dissemination of NRSE and incentives introduced by African countries are also discussed. The conclusion is that African countries acknowledge the role of NRSE technologies in the development of future world energy systems. Yet the probability of NRSE assuming a greater share in energy supplies within the next two decades in Africa is doubtful. (author) 3 tabs., 1 fig., 7 refs

  1. MARKAL Application for Analysis of Energy Efficiency in Economic Activities of the Republic of Moldova and Feasible use of Renewable Energy Sources

    OpenAIRE

    Robu S.; Bicova E.; Siakkis P.; Giannakidis G.

    2010-01-01

    The paper presents results of analyses of energy efficiency measures and renewable energy sources implementation in the Republic of Moldova using MARKAL model. Detailed analyses of four scenarios are presented for: Reference Scenario; Energy Efficiency Scenario; Renewable Energy Sources Scenario; Energy Efficiency&Renewable Energy Scenario. Energy savings and costs are identified for implementation of renewable energy sources and Energy efficiency measures.

  2. Radioistopes to Solar to High Energy Accelerators – Chip-Scale Energy Sources

    International Nuclear Information System (INIS)

    This talk will present MEMS based power sources that utilize radioisotopes, solar energy, and potentially nuclear energy through advancements in integration of new structures and materials within MEMS. Micro power harvesters can harness power from vibration, radioisotopes, light, sound, and biology may provide pathways to minimize or even eliminate batteries in sensor nodes. In this talk work on radioisotope thin films for MEMS will be include the self-reciprocating cantilever, betavoltaic cells, and high DC voltages. The self-reciprocating cantilever energy harvester allows small commercially viable amounts of radioisotopes to generate mW to Watts of power so that very reliable power sources that last 100s of years are possible. The tradeoffs between reliability and potential stigma with radioisotopes allow one to span a useful design space with reliability as a key parameter. These power sources provide pulsed power at three different time scales using mechanical, RF, and static extraction of energy from collected charge. Multi-use capability, both harvesting radioisotope power and local vibration energy extends the reliability of micro-power sources further

  3. Ground source energy in crystalline bedrock - increased energy extraction by using hydraulic fracturing in boreholes

    OpenAIRE

    Ramstad, Randi Kalskin

    2004-01-01

    The use of improved equipment and methodology can result in considerable reductions in the drilling costs for medium- to large sized ground source heat pump system in crystalline bedrock. The main point has been to use special techniques within hydraulic fracturing to create a larger heat exchange area in the bedrock, and thus a greater energy extraction per borehole. The energy extraction is based on circulating groundwater.Stimulation with hydraulic fracturing is a well known technique in o...

  4. Renewable Energy Sources in the Frame of New Croatian Energy Laws

    International Nuclear Information System (INIS)

    Foreseen changes in the market of network energy systems in the Republic of Croatia, that include restructuring, privatisation and changes in the whole energy sector are going to have significant influence on the possibilities of introduction and use of renewable energy sources (RES). After recognition of Energy Law and three laws on markets (electric energy, gas, oil and oil derivatives) and Energy Activities Regulation Law, there is still a demanding job to be undertaken regarding numerous sub law acts, that are to define precisely all instruments of the state policy considering RES. The application of new laws and sub laws on RES projects in Croatia will create stabile and complete framework through incentive measures that are going to evaluate environmental and all other positive outcomes from RES. In accordance with other European countries Croatia will create a transparent platform to accommodate expected increase in the RES sector.(author)

  5. 48 CFR 217.175 - Multiyear contracts for electricity from renewable energy sources.

    Science.gov (United States)

    2010-10-01

    ... electricity from renewable energy sources. 217.175 Section 217.175 Federal Acquisition Regulations System... renewable energy sources. (a) The head of the contracting activity may enter into a contract for a period not to exceed 10 years for the purchase of electricity from sources of renewable energy, as that...

  6. Portal. Making a portal site. INIS Web Services and energy information sources

    International Nuclear Information System (INIS)

    The International Nuclear Information System (INIS) provides links to useful nuclear related information sources in Internet by the name of 'INIS Web Services' and the Energy Technology Data Exchange (ETDE) also provides links to useful energy related information sources in Internet by the name of Energy Information Source'. This paper outlines these two services. (author)

  7. Hybrid Design of Electric Power Generation Systems Including Renewable Sources of Energy

    Science.gov (United States)

    Wang, Lingfeng; Singh, Chanan

    2008-01-01

    With the stricter environmental regulations and diminishing fossil-fuel reserves, there is now higher emphasis on exploiting various renewable sources of energy. These alternative sources of energy are usually environmentally friendly and emit no pollutants. However, the capital investments for those renewable sources of energy are normally high,…

  8. Trimode Power Converter optimizes PV, diesel and battery energy sources

    Science.gov (United States)

    Osullivan, George; Bonn, Russell; Bower, Ward

    1994-12-01

    Conservatively, there are 100,000 localities in the world waiting for the benefits that electricity can provide, and many of these are in climates where sunshine is plentiful. With these locations in mind a prototype 30 kW hybrid system has been assembled at Sandia to prove the reliability and economics of photovoltaic, diesel and battery energy sources managed by an autonomous power converter. In the Trimode Power Converter the same power parts, four IGBT's with an isolation transformer and filter components, serve as rectifier and charger to charge the battery from the diesel; as a stand-alone inverter to convert PV and battery energy to AC; and, as a parallel inverter with the diesel-generator to accommodate loads larger than the rating of the diesel. Whenever the diesel is supplying the load, an algorithm assures that the diesel is running at maximum efficiency by regulating the battery charger operating point. Given the profile of anticipated solar energy, the cost of transporting diesel fuel to a remote location and a five year projection of load demand, a method to size the PV array, battery and diesel for least cost is developed.

  9. Propagation and Source Energy Spectra of Cosmic-Ray Nuclei at High Energies

    CERN Document Server

    Ave, M; Hoeppner, C; Marshall, J; Müller, D

    2008-01-01

    A recent measurement of the TRACER instrument on long-duration balloon has determined the individual energy spectra of the major primary cosmic-ray nuclei from oxygen (Z=8) to iron (Z=26). The measurements cover a large range of energies and extend to energies beyond 10^14 eV. We investigate if the data set can be described by a simple but plausible model for acceleration and propagation of cosmic rays. The model assumes a power-law energy spectrum at the source with a common spectral index alpha for all nuclear species, and an energy dependent propagation pathlength (Lambda proportional to E^-0.6) combined with an energy-independent residual pathlength Lambda_0. We find that the data can be fit with a fairly soft source spectrum alpha=2.3-2.4), and with a residual pathlength Lambda_0 as high as 0.3 g cm^-2. We discuss this model in the context of other pertinent information, and we determine the relative abundances of the elements at the cosmic-ray source.

  10. Evaluation of Energy Use in Public Housing in Lagos, Nigeria: Prospects for Renewable Energy Sources

    Directory of Open Access Journals (Sweden)

    Isidore Chukwunweike Ezema

    2016-02-01

    Full Text Available Even though domestic energy can be from either renewable or non-renewable sources, the former is preferred because of its role in reducing both the operational energy intensity and carbon footprint. Given the positive role renewable energy plays in the energy mix, this paper examined the pattern of operational energy use with particular reference to the renewable and non-renewable energy content in medium and high density public residential buildings in Lagos, Nigeria. A survey research method was adopted for primary data collection while data analysis was by descriptive statistics. The study found that renewable energy use in the residential units is very low. In contrast, there was high dependence of the occupants on non-renewable direct fuel combustion through the use of fossil fuel-driven privately-owned electricity generators for electricity supply as a result of the inadequate supply from the national grid. In addition to the relatively high operational energy intensity observed in the studied buildings, the findings have implications for the safety, health and wellbeing of the building occupants as well as for carbon emissions from the buildings and for overall environmental sustainability. Recommendations to increase renewable energy use in new buildings and as retrofits in existing buildings were made. Article History: Received Oct 18, 2015; Received in revised form January 14, 2016; Accepted January 30, 2016; Available online How to Cite This Article: Ezema, I.C., Olotuah, A.O., and Fagbenle, O.I, S. (2016 Evaluation of Energy Use in Public Housing in Lagos, Nigeria: Prospects for Renewable Energy Sources. Int. Journal of Renewable Energy Development, 5(1,15-24. http://dx.doi.org/10.14710/ijred.5.1.15-24 

  11. Usage of Unconventional Energy Sources against Reducing Impact on Environment. Case Study

    OpenAIRE

    Rubnicu, Alin

    2012-01-01

    In order to analyse the building reducing environmental impact by using unconventional energy sources (in this case solar energy) will calculate the annual energy necesary for the studied building (annual energy needs for heating and will add one for hot water and household electric consumers). Then it is calculated the energy consumption and CO2 emissions when using conventional energy sources (solid fuel boiler and the national energy system). Due to excessive amount of produced surplus ene...

  12. Evaluation of Economic, Energy-Environmental and Societal Effects of Non-Renewable Energy Substitution with Renewable Energy Sources

    OpenAIRE

    Joachim Kozioł; Barbara Mendecka

    2015-01-01

    The analysis of effects of non-renewable energy (reference fuel) substitution with renewable energy sources of interest (RES) was conducted with the use of social indicator for each effect arising from production of a given utility product in communal and living power industry. The aforementioned effect may be of energy-environmental, economic or social nature, etc. This means it affects elements of living standard ratios. Reference fuel should be the most common one in the area in terms o...

  13. High Energy Density Science at the Linac Coherent Light Source

    International Nuclear Information System (INIS)

    High energy density science (HEDS), as a discipline that has developed in the United States from National Nuclear Security Agency (NNSA)-sponsored laboratory research programs, is, and will remain, a major component of the NNSA science and technology strategy. Its scientific borders are not restricted to NNSA. 'Frontiers in High Energy Density Physics: The X-Games of Contemporary Science' identified numerous exciting scientific opportunities in this field, while pointing to the need for a overarching interagency plan for its evolution. Meanwhile, construction of the first x-ray free-electron laser, the Office-of-Science-funded Linear Coherent Light Source-LCLS: the world's first free electron x-ray laser, with 100-fsec time resolution, tunable x-ray energies, a high rep rate, and a 10 order-of-magnitude increase in brightness over any other x-ray source--led to the realization that the scientific needs of NNSA and the broader scientific community could be well served by an LCLS HEDS endstation employing both short-pulse and high-energy optical lasers. Development of this concept has been well received in the community. NNSA requested a workshop on the applicability of LCLS to its needs. 'High Energy Density Science at the LCLS: NNSA Defense Programs Mission Need' was held in December 2006. The workshop provided strong support for the relevance of the endstation to NNSA strategic requirements. The range of science that was addressed covered a wide swath of the vast HEDS phase space. The unique possibilities provided by the LCLS in areas of intense interest to NNSA Defense Programs were discussed. The areas of focus included warm dense matter and equations of state, hot dense matter, and behavior of high-pressure materials under conditions of high strain-rate and extreme dynamic loading. Development of new and advanced diagnostic techniques was also addressed. This report lays out the relevant science, as brief summaries (Ch. II), expanded descriptions (Ch. V), and a

  14. High Energy Density Science at the Linac Coherent Light Source

    Energy Technology Data Exchange (ETDEWEB)

    Lee, R W

    2007-10-19

    High energy density science (HEDS), as a discipline that has developed in the United States from National Nuclear Security Agency (NNSA)-sponsored laboratory research programs, is, and will remain, a major component of the NNSA science and technology strategy. Its scientific borders are not restricted to NNSA. 'Frontiers in High Energy Density Physics: The X-Games of Contemporary Science' identified numerous exciting scientific opportunities in this field, while pointing to the need for a overarching interagency plan for its evolution. Meanwhile, construction of the first x-ray free-electron laser, the Office-of-Science-funded Linear Coherent Light Source-LCLS: the world's first free electron x-ray laser, with 100-fsec time resolution, tunable x-ray energies, a high rep rate, and a 10 order-of-magnitude increase in brightness over any other x-ray source--led to the realization that the scientific needs of NNSA and the broader scientific community could be well served by an LCLS HEDS endstation employing both short-pulse and high-energy optical lasers. Development of this concept has been well received in the community. NNSA requested a workshop on the applicability of LCLS to its needs. 'High Energy Density Science at the LCLS: NNSA Defense Programs Mission Need' was held in December 2006. The workshop provided strong support for the relevance of the endstation to NNSA strategic requirements. The range of science that was addressed covered a wide swath of the vast HEDS phase space. The unique possibilities provided by the LCLS in areas of intense interest to NNSA Defense Programs were discussed. The areas of focus included warm dense matter and equations of state, hot dense matter, and behavior of high-pressure materials under conditions of high strain-rate and extreme dynamic loading. Development of new and advanced diagnostic techniques was also addressed. This report lays out the relevant science, as brief summaries (Ch. II), expanded

  15. Health and economic costs of alternative energy sources

    International Nuclear Information System (INIS)

    National energy policy requires realistic totalling of costs in assessing energy alternatives. The Biomedical and Environmental Assessment Division (BEAD) at Brookhaven is estimating health and environmental costs of energy production and use. It was estimated that the production of electric power from all sources in the USA in 1975 was associated with 2000-19,000 deaths and 29,000-48,000 disabilities; this is roughly 0.2-2% of total deaths in the USA for ages 1-74. The estimated health effects associated with a total fuel cycle standardized to produce 1010kWh electric power were: from coal, estimated deaths 10-200, estimated disabilities 300-500; from oil, estimated deaths 3-150, estimated disabilities 150-300; from gas, estimated deaths 0.2, estimated disabilities 20; from nuclear power, estimated deaths 1-3, estimated disabilities 8-30. The differences in the year 2000 between health impacts of the US energy system under normal growth expectations and under conditions of a nuclear moratorium were estimated. On the assumption that the nuclear moratorium would require 200 additional 1000-MW(e) coal-fired power plants and that, with improved control technology, sulphur emissions were equivalent to 0.5% sulphur coal (12,500Btu/lb), additional estimated deaths were 1500-18,000 annually. By the same assumptions, it turns out that a nationwide nuclear moratorium could lead to low economic losses initially that would rise rapidly after the year 2000, so that the cost to the USA in 2010 would be US $109x109. Summing the costs for 1975 through 2050, the present value of these losses would be US $77x109 or US $595x109, depending on whether public decisions are to be based on a 10% or 5% discount rate. (author)

  16. Renewable energy sources at decisive turning; Le energie rinnovabili a una svolta decisiva

    Energy Technology Data Exchange (ETDEWEB)

    Riboldi, S.

    2000-11-01

    The renewable energy sources will be very important for planetary environmental emergency and for technological evolution. [Italian] Marginali da molti anni, le rinnovabili diverranno di primaria importanza grazie all'emergenza ambientale planetaria e all'evoluzione tecnologica. Siamo giunti finalmente a una vera svolta epocale?.

  17. Capitalization of renewable energy sources: Romanian case studies

    International Nuclear Information System (INIS)

    One of the major challenges of the recent integration of Romania in the European Union is the extension of use, at national scale, of Renewable Energy Sources (RES). Targeting private operators and municipalities, authors have as objective to deliver an investigation on the interesting 'Acquis' in financing and implementing RES projects in Romania. Using as method of investigation the accurate screening of their experience as well as the extended international experience in the field, authors have reviewed in the present paper different possibilities in RES investment financing, frequent obstacles and barriers, and ways for overcoming them. Recent results are motivating authors to consider the national experience of an encouraging success and to act towards the capitalization of such investments replication potential to a national and regional scale. (authors)

  18. HIGH INTENSITY LOW-ENERGY POSITRON SOURCE AT JEFFERSON

    Energy Technology Data Exchange (ETDEWEB)

    Serkan Golge, Bogdan Wojtsekhowski, Branislav Vlahovic

    2012-07-01

    We present a novel concept of a low-energy e{sup +} source with projected intensity on the order of 10{sup 10} slow e{sup +}/s. The key components of this concept are a continuous wave e{sup -} beam, a rotating positron-production target, a synchronized raster/anti-raster, a transport channel, and extraction of e{sup +} into a field-free area through a magnetic plug for moderation in a cryogenic solid. Components were designed in the framework of GEANT4-based (G4beamline) Monte Carlo simulation and TOSCA magnetic field calculation codes. Experimental data to demonstrate the effectiveness of the magnetic plug is presented.

  19. Impact of Renewable Energy Sources Penetration in a Microgrid

    Directory of Open Access Journals (Sweden)

    N. Ravi,

    2014-05-01

    Full Text Available Recently, several types of Distributed Generators (DGs have been connected together to form a small power system called a microgrid (MG. MG usually operates in normal connecting mode and is connected to the main grid. This paper presents the performance enhancement of microgrid with RES (Renewable Energy Sources penetration in grid connected and islanded operation, and also shows the effect of wind and solar penetration individually and as well as coupled along with backup protection. To analyze the effect of RES penetration into micro grid a synchronous speed wind turbine equipped with SCIG (Squirrel cage Induction Generator and solar system with MPPT (Maximum Power Point Tracking are used. A modified Benchmark micro grid is used and simulations are performed in the MATLAB/SIMULINK environment.

  20. High-energy gamma-ray sources of cosmological origin

    Science.gov (United States)

    Brun, Pierre; Cohen-Tanugi, Johann

    2016-06-01

    The current generation of instruments in gamma-ray astrophysics launched a new era in the search for a dark matter signal in the high-energy sky. Such searches are said indirect, in the sense that the presence of a dark matter particle is inferred from the detection of products of its pair-annihilation or decay. They have recently started to probe the natural domain of existence for weakly interacting massive particles (WIMPs), the favorite dark matter candidates today. In this article, we review the basic framework for indirect searches and we present a status of current limits obtained with gamma-ray observations. We also devote a section to another possible class of cosmological gamma-ray sources, primordial black holes, also considered as a potential constituent of dark matter. xml:lang="fr"

  1. Current Source Converter Based Wind Energy Conversion Systems

    Institute of Scientific and Technical Information of China (English)

    Samir Kouro; Jing-ya DAI; Bin WU

    2011-01-01

    The increase in the installed capacity of wind energy conversion systems (WECS) has triggered the development of more demanding grid codes and additional requirements on performance.In order to meet these requirements the industry trend has shifted to full-scale power converter interfaces in modern multi-megawatt WECS.As consequence,a wide variety of new power converter topologies and WECS configurations have been introduced in recent years.Among them,current source converter(CSC) based configurations have attracted attention due to a series of advantages like:simple structure,grid friendly waveforms,controllable power factor,and reliable grid short-circuit protection.This paper presents the latest developments in CSC interfaces for WECS and related technologies such as modulation methods,control schemes and grid code compatibility.

  2. Thorium as an energy source. Opportunities for Norway

    International Nuclear Information System (INIS)

    Final Recommendations of the Thorium Report Committee: 1) No technology should be idolized or demonized. All carbon-dioxide (Co2) emission-free energy production technologies should be considered. The potential contribution of nuclear energy to a sustainable energy future should be recognized. 2) An investigation into the resources in the Fen Complex and other sites in Norway should be performed. It is essential to assess whether thorium in Norwegian rocks can be defined as an economical asset for the benefit of future generations. Furthermore, the application of new technologies for the extraction of thorium from the available mineral sources should be studied. 3) Testing of thorium fuel in the Halden Reactor should be encouraged, taking benefit of the well recognized nuclear fuel competence in Halden. 4) Norway should strengthen its participation in international collaborations by joining the EURATOM fission program and the GIF program on Generation IV reactors suitable for the use of thorium. 5) The development of an Accelerator Driven System (ADS) using thorium is not within the capability of Norway working alone. Joining the European effort in this field should be considered. Norwegian research groups should be encouraged to participate in relevant international projects, although these are currently focused on waste management. 6) Norway should bring its competence in waste management up to an international standard and collaboration with Sweden and Finland could be beneficial. 7) Norway should bring its competence with respect to dose assessment related to the thorium cycle up to an international standard. 8) Since the proliferation resistance of uranium-233 depends on the reactor and reprocessing technologies, this aspect will be of key concern should any thorium reactor be built in Norway. 9) Any new nuclear activities in Norway, e.g. thorium fuel cycles, would need strong international pooling of human resources, and in the case of thorium, a strong long

  3. Thorium as an energy source. Opportunities for Norway

    Energy Technology Data Exchange (ETDEWEB)

    2008-01-15

    Final Recommendations of the Thorium Report Committee: 1) No technology should be idolized or demonized. All carbon-dioxide (Co2) emission-free energy production technologies should be considered. The potential contribution of nuclear energy to a sustainable energy future should be recognized. 2) An investigation into the resources in the Fen Complex and other sites in Norway should be performed. It is essential to assess whether thorium in Norwegian rocks can be defined as an economical asset for the benefit of future generations. Furthermore, the application of new technologies for the extraction of thorium from the available mineral sources should be studied. 3) Testing of thorium fuel in the Halden Reactor should be encouraged, taking benefit of the well recognized nuclear fuel competence in Halden. 4) Norway should strengthen its participation in international collaborations by joining the EURATOM fission program and the GIF program on Generation IV reactors suitable for the use of thorium. 5) The development of an Accelerator Driven System (ADS) using thorium is not within the capability of Norway working alone. Joining the European effort in this field should be considered. Norwegian research groups should be encouraged to participate in relevant international projects, although these are currently focused on waste management. 6) Norway should bring its competence in waste management up to an international standard and collaboration with Sweden and Finland could be beneficial. 7) Norway should bring its competence with respect to dose assessment related to the thorium cycle up to an international standard. 8) Since the proliferation resistance of uranium-233 depends on the reactor and reprocessing technologies, this aspect will be of key concern should any thorium reactor be built in Norway. 9) Any new nuclear activities in Norway, e.g. thorium fuel cycles, would need strong international pooling of human resources, and in the case of thorium, a strong long

  4. Molecular ion sources for low energy semiconductor ion implantation (invited)

    Energy Technology Data Exchange (ETDEWEB)

    Hershcovitch, A., E-mail: hershcovitch@bnl.gov [Brookhaven National Laboratory, Upton, New York 11973 (United States); Gushenets, V. I.; Bugaev, A. S.; Oks, E. M.; Vizir, A.; Yushkov, G. Yu. [High Current Electronics Institute, Siberian Branch of Russian Academy of Sciences, Tomsk 634055 (Russian Federation); Seleznev, D. N.; Kulevoy, T. V.; Kozlov, A.; Kropachev, G. N.; Kuibeda, R. P.; Minaev, S. [Institute for Theoretical and Experimental Physics, Moscow 117218 (Russian Federation); Dugin, S.; Alexeyenko, O. [State Scientific Center of the Russian Federation State Research Institute for Chemistry and Technology of Organoelement Compounds, Moscow (Russian Federation)

    2016-02-15

    Smaller semiconductors require shallow, low energy ion implantation, resulting space charge effects, which reduced beam currents and production rates. To increase production rates, molecular ions are used. Boron and phosphorous (or arsenic) implantation is needed for P-type and N-type semiconductors, respectively. Carborane, which is the most stable molecular boron ion leaves unacceptable carbon residue on extraction grids. A self-cleaning carborane acid compound (C{sub 4}H{sub 12}B{sub 10}O{sub 4}) was synthesized and utilized in the ITEP Bernas ion source resulting in large carborane ion output, without carbon residue. Pure gaseous processes are desired to enable rapid switch among ion species. Molecular phosphorous was generated by introducing phosphine in dissociators via 4PH{sub 3} = P{sub 4} + 6H{sub 2}; generated molecular phosphorous in a pure gaseous process was then injected into the HCEI Calutron-Bernas ion source, from which P{sub 4}{sup +} ion beams were extracted. Results from devices and some additional concepts are described.

  5. The Role of CHP Plants in the Integration of Fluctuating Renewable Energy Sources

    DEFF Research Database (Denmark)

    Lund, Henrik

    2002-01-01

    The paper is an Expression of Interest to the European Commission about renewable energy sources and their integration in a energy system......The paper is an Expression of Interest to the European Commission about renewable energy sources and their integration in a energy system...

  6. Renewable energy sources: resistance to change; Energies renouvelables: les resistances au changement

    Energy Technology Data Exchange (ETDEWEB)

    Dubreuil, Th.; Audrain-Demey, G.; Attal, J.Ph.; Lormeteau, B. [Nantes Univ., Droit de l' Environnement et du Developpement Durable, 44 (France)

    2011-10-15

    This paper is the summary of a conference day organised by the students of the 'environment and sustainable development law' Master of Nantes university (France). This interdisciplinary meeting brought together professionals of renewable energy industries who could testify about the resistance of both politicians and the public opinion against the energy transition towards renewable sources. Legal, political, sociological and cultural considerations are put forward to explain this resistance. The French specificity, with an over-representation of nuclear energy, a constraining legal framework for renewable energies, a regional opposition to renewable energy projects (NIMBY syndrome), and a lack of trust in the political class and in its representatives are as many factors that have contributed to build this French 'cultural exception'. (J.S.)

  7. Nuclear fuel: sustainable source of energy or burden on society?

    International Nuclear Information System (INIS)

    In the past, the question concerning the sustainability of a resource primarily addressed its finite nature. Accordingly, electricity production using renewable energies was clearly sustainable. Contrasting this are systems based on oil, gas, coal or uranium. However, from the perspective of 'neo-sustainability' being analyzed today, this assessment appears less clear-cut, especially in light of the definition of sustainability as provided by the Brundtland report. Nowadays, the depletion time of fuel resources is thus not the only significant aspect, but factors such as efficiency, ecofriendliness and social responsibility also figure in. The nuclear fuel supply is analyzed from a sustainability perspective. After a short description of the supply chain, each of the most important aspects of sustainability are related to the individual stages of the supply chain and evaluated. This method aims at answering the question concerning to what extent nuclear fuel is a sustainable source of energy. Although the recycling of fissile materials from reprocessing and the deployment of advanced reactors are key factors as regards the issue of sustainability, these topics are deliberately only touched on. The main focus lies on the sustainability of the nuclear fuel cycle as it is currently utilized in light water reactors, without discussing the subject of reprocessing. (orig.)

  8. A low energy ion source for electron capture spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Tusche, C., E-mail: tusche@mpi-halle.mpg.de [Max-Planck-Institut für Mikrostrukturphysik, Weinberg 2, 06120 Halle (Germany); Kirschner, J. [Max-Planck-Institut für Mikrostrukturphysik, Weinberg 2, 06120 Halle (Germany); Naturwissenschaftliche Fakultät II, Martin-Luther-Universität Halle-Wittenberg, 06120 Halle (Germany)

    2014-06-15

    We report on the design of an ion source for the production of single and double charged Helium ions with kinetic energies in the range from 300 eV down to 5 eV. The construction is based on a commercial sputter ion gun equipped with a Wien-filter for mass/charge separation. Retardation of the ions from the ionizer potential (2 keV) takes place completely within the lens system of the sputter gun, without modification of original parts. For 15 eV He{sup +} ions, the design allows for beam currents up to 30 nA, limited by the space charge repulsion in the beam. For He{sup 2+} operation, we obtain a beam current of 320 pA at 30 eV, and 46 pA at 5 eV beam energy, respectively. In addition, operating parameters can be optimized for a significant contribution of metastable He*{sup +} (2s) ions.

  9. Centaurus X-3 A Source of High Energy $\\gamma$ Rays

    CERN Document Server

    Chadwick, P M; Dipper, N A; Kendall, T R; McComb, T J L; Orford, K J; Osborne, J L; Rayner, S M; Roberts, I D; Shaw, S E; Turver, K E

    1998-01-01

    Centaurus X-3 is a well-studied high-mass accreting X-ray binary and a variable source of high energy gamma rays with energies from 100 MeV to 1 TeV. Previous results have suggested that the origin of the gamma rays is not the immediate vicinity of the neutron star but is sited in the accretion disc, perhaps in an accretion wake. The Durham Mark 6 gamma ray telescope has been used to measure the gamma ray flux from Centaurus X-3 with much higher sensitivity than previous ground-based measurements. The flux above ~ 400 GeV was measured to be (2 +/- 0.3) x 10^-11 cm^-2 s^-1 and appears constant over a period of 2 - 3 months. In 10 hours of observations there is no evidence for periodicity in the detected gamma rays at the X-ray spin period either from a site in the region of the neutron star, or from any other potential site in the orbit.

  10. Low energy electron point source microscopy: beyond imaging

    Energy Technology Data Exchange (ETDEWEB)

    Beyer, Andre; Goelzhaeuser, Armin [Physics of Supramolecular Systems and Surfaces, University of Bielefeld, Postfach 100131, 33501 Bielefeld (Germany)

    2010-09-01

    Low energy electron point source (LEEPS) microscopy has the capability to record in-line holograms at very high magnifications with a fairly simple set-up. After the holograms are numerically reconstructed, structural features with the size of about 2 nm can be resolved. The achievement of an even higher resolution has been predicted. However, a number of obstacles are known to impede the realization of this goal, for example the presence of electric fields around the imaged object, electrostatic charging or radiation induced processes. This topical review gives an overview of the achievements as well as the difficulties in the efforts to shift the resolution limit of LEEPS microscopy towards the atomic level. A special emphasis is laid on the high sensitivity of low energy electrons to electrical fields, which limits the structural determination of the imaged objects. On the other hand, the investigation of the electrical field around objects of known structure is very useful for other tasks and LEEPS microscopy can be extended beyond the task of imaging. The determination of the electrical resistance of individual nanowires can be achieved by a proper analysis of the corresponding LEEPS micrographs. This conductivity imaging may be a very useful application for LEEPS microscopes. (topical review)

  11. The Use of Energy in Malaysia: Tracing Energy Flows from Primary Source to End Use

    Directory of Open Access Journals (Sweden)

    Chinhao Chong

    2015-04-01

    Full Text Available Malaysia is a rapidly developing country in Southeast Asia that aims to achieve high-income country status by 2020; its economic growth is highly dependent on its abundant energy resources, especially natural gas and crude oil. In this paper, a complete picture of Malaysia’s energy use from primary source to end use is presented by mapping a Sankey diagram of Malaysia’s energy flows, together with ongoing trends analysis of the main factors influencing the energy flows. The results indicate that Malaysia’s energy use depends heavily on fossil fuels, including oil, gas and coal. In the past 30 years, Malaysia has successfully diversified its energy structure by introducing more natural gas and coal into its power generation. To sustainably feed the rapidly growing energy demand in end-use sectors with the challenge of global climate change, Malaysia must pay more attention to the development of renewable energy, green technology and energy conservation in the future.

  12. The EIB and the financing of renewable energy sources

    International Nuclear Information System (INIS)

    As a financial institution o the European Union, The European Investment Bank is working and to add substance to the commitments made by the Union and its Member States at Kyoto and subsequently at Johannesburg. Over the last two years, renewable energy sources have attracted funding of more than 1.1 billion from the bank, equivalent to 14% of the total loans granted to the energy sector 7.8 billion), compared to an average o 7.9 % over the previous five years. In order to obviate the detrimental characteristics presented by these investments from a financial viewpoint, in March, 2004 the bank set up a 'CCFF' (Climate Change Financing Facility) of 500 million. Additionally, along with the other financial institutions, the EIB is looking into he possibility of supporting the establishment of European carbon credit trading hubs. Where the economic assessment of these projects is concerned, the bank has decided to take account of external environmental and technological factors when calculating the internal profitability levels for renewable energy projects. Moreover, in order to deal with the problem of who exactly should bear the related risks, the bank is able to offer structured financing. For projects located outside the European Union, venture capital and technical assistance instruments make it possible to promote the emergence of innovative projects. Although we are witnessing the sustained growth of loans from the EIB in this sector, additional efforts still need to be made by the legislature in order to strengthen the framework for such projects including emissions quotas, mechanisms for ensuring the solvency of environmental on-costs and international trading rules adapted to take account of the possible distortion of competition, etc. (author)

  13. THE HARNESSING OF THE RENEWABLE ENERGY SOURCES POTENTIAL OF THE REPUBLIC OF MOLDOVA

    OpenAIRE

    Dumitru SIMONOV

    2015-01-01

    Ensuring energy needs has turned into a major topic of all socio-economic systems worldwide. Against this background, renewable energy sources become a powerful part of the national, regional and global security. Given the current global trends and the major dependence on imports of energy resources in Moldova, a new strategy must be adopted by upgrading existing energy infrastructure, internal energy market analysis, diversification of the existing renewable energy sources and permanent coor...

  14. Investigation the Annual Inflation Rate of Each Energy Source on Optimal Sizing of Distributed Energy Resources

    Directory of Open Access Journals (Sweden)

    Bahram Fathi

    2011-08-01

    Full Text Available This study presents an investigation of Inflation Rate of each Energy Source on the optimized design of Hybrid Power System (HPS in a distribution system including sources like, photovoltaic array, fuel cell and battery bank.In this research, an algorithm has been developed for evaluation and cost optimization HPS. The costs include capital cost, replacement cost, operation and maintenance cost, fuel cost and production cost for HPS and DG power during different load profile. Then an objective function with aim to minimizing of total costs has been considered. A genetic algorithm approach is employed to obtain the best cost value of HPS construction.

  15. Nuclear energy, its social impact to the environment. The renewable energy sources, a viable alternative

    International Nuclear Information System (INIS)

    The authors present arguments against nuclear energy and pro renewable energy sources. Thus, the water used in Uranium mining and primary ore processing becomes contaminated in long lived radioisotopes and so a threat for local ecosystems and communities. Then, during the fabrication, enrichment, and handling of nuclear fuel the workers are exposed to radiations and dangerous accidental radioactive leaks can occur. But, by far, the most menacing aspect of nuclear power exploitation remains the human errors in operating the nuclear plants which can result in major accidents like that from Chernobyl which spread radioactivity all over the Europe. The equipment used in nuclear facilities which is highly contaminated as well as the burned fuel implies transportation and long term storage which also present high risks. The major advantage of the nuclear energy consists in its very low environment impact and its null contribution to the greenhouse effect. In contrast, the renewable energy sources appear to be both increasingly cheaper and more safe for man and environment. The authors present a list of twelve major advantages pleading in favour of development of renewable energy technology

  16. Aspects Regarding Implementation of Renewable Energy Sources in Romania up to 2050

    OpenAIRE

    Dorel Dusmanescu

    2013-01-01

    The paper describes the tendencies in the implementation of renewable energy sources in Romania until 2050. It is presented some arguments to justify the necessity to implement the renewable energy sources. Using the potential of renewable sources previously estimated for Romania are presented two scenarios with the necessary considerations.

  17. 3rd Miami international conference on alternative energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Nejat Veziroglu, T.

    1980-01-01

    The conference includes sessions on solar energy, ocean thermal energy, wind energy, hydro power, nuclear breeders and nuclear fusion, synthetic fuels from coal or wastes, hydrogen production and uses, formulation of workable policies on energy use and energy conservation, heat and energy storage, and energy education. The volume of the proceedings presents the papers and lectures in condensed format grouped by subject under forty-two sessions for 319 presentations.

  18. 3rd Miami international conference on alternative energy sources

    International Nuclear Information System (INIS)

    The conference includes sessions on solar energy, ocean thermal energy, wind energy, hydro power, nuclear breeders and nuclear fusion, synthetic fuels from coal or wastes, hydrogen production and uses, formulation of workable policies on energy use and energy conservation, heat and energy storage, and energy education. The volume of the proceedings presents the papers and lectures in condensed format grouped by subject under forty-two sessions for 319 presentations

  19. BPS, energy efficiency and renewable energy sources for buildings greening and zero energy cities planning harmony and ethics of sustainability

    Energy Technology Data Exchange (ETDEWEB)

    Todorovic, Marija S. [University of Belgrade, Serbia and Southeast University (China)

    2011-07-01

    Traditional village houses now use renewable materials and energy sources and this paper presents the intrinsic harmony of these buildings' greening and their sustainability. The paper covers building technical systems, sustainable energy supply, and the importance of renewable raw materials (RMS) for sustainable development. This study investigated the role of building dynamic behavior and optimized energy efficiency in reducing thermal loads significantly. A preliminary design for sustainable energy efficient settlements with net zero energy buildings is proposed and a comprehensive multidisciplinary engineering study was done which identified the technical feasibility of sustainable village energy and water supplies using solar or wind technologies. Overall, through analysis of sustainability definitions and possible ways to achieve sustainability, the study demonstrated that this can only be brought about by interdisciplinary interaction and finding the right balance between materiality and spirituality, science and art, and between technological development and concern for cultural and other human values.

  20. Solar energy as an alternate energy source to mixed oxide fuels in light-water cooled reactors

    International Nuclear Information System (INIS)

    Supplemental information pertaining to the generic environmental impact statement on the Pu recycling process for mixed oxide light-water cooled reactors (GESMO) was requested from several sources. In particular, the role of alternate sources of energy was to be explored and the implications of these alternate sources to the question of Pu recycle in LWRs were to be investigated. In this vein, solar energy as an alternate source is the main subject of this report, along with other information related to solar energy. The general conclusion is that solar energy should have little effect on the decisions concerning GESMO

  1. ARC technology turns animal manure into new source of energy

    Energy Technology Data Exchange (ETDEWEB)

    Golka, V.

    2003-09-30

    Bio-based fertilizers, reusable water and reduced greenhouse gas emissions are the results of the Integrated Manure Utilization System (IMUS) began some five years ago at the Alberta Research Council. The process incorporates anaerobic digestion that produces biogas, which is then used to generate electricity, while the nutrient byproducts of the process are used to produce bio-based fertilizer and water, which is reusable for applications like irrigation. A pilot-scale IMUS plant was constructed at Highland Feeders in Vegreville, which will produce one MW of electricity from the manure produced by 7,500 head of cattle. Commercialization of the technology is underway as a joint venture involving the Alberta Research Council, industry, the federal and provincial governments and non-governmental agencies. Because IMUS is designed to overcome the challenges associated with high-solid manure typical of most outdoor feedlots in North America, the technology is adaptable to other biomass sources, including liquid manure, food processing waste and municipal waste; a significant development in the field of renewable energy technologies. The demonstration project is expected to reduce greenhouse gas emissions by 740,000 tonnes annually based on cattle manure only; more when other livestock, such as poultry and dairy are included.

  2. Valuation of flexible solutions with alternative fuel cell energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Haahtela, T.; Surakka, T.; Malinen, P. [Helsinki Univ. of Technology, Espoo (Finland). BIT Research Centre

    2009-07-01

    Fuel cells are an emerging technology with high potential, but also with significant market uncertainty. Fuel cells are currently in the transition from field trials to commercial introduction, and firms need to consider whether the technology fulfils the reliability and cost requirements of their current and upcoming products. This paper presented a framework to assist managers in finding the suitable valuation method for comparing different alternatives with emerging fuel cell technology. The dynamic valuation approaches of decision tree analysis, real options and system dynamics were discussed as they help in choosing the optimal timing and product structure over a long time period. Three examples of applications with fuel cells were briefly presented. The paper also addressed how the suggested valuation methods could be applied to them. These applications included maritime buoys; removable crisis management energy source container; and electrification of public transportation. It was concluded that the fuel cell technology has already become economically feasible in certain application areas. Improving technical reliability and cost reductions will make fuel cells even more competitive alternatives in new application areas. 9 refs., 1 tab., 1 fig.

  3. Identifying barriers in the diffusion of renewable energy sources

    International Nuclear Information System (INIS)

    Rapid diffusion of renewable energy sources (RES) in the electricity power sector is crucial if the EU wants to fulfill its 2050 CO2 reduction commitments. For this reason, identifying and alleviating all barriers that hinder the development of RES is necessary to the successful deployment of these technologies. This paper discusses the main barriers in the diffusion of wind and photovoltaic (PV) solar power in the Greek electricity sector by drawing on the literature of technological innovation systems and system functions. Furthermore, we provide an explanation of the different diffusion rates between the two technologies. Inadequate financial resources, low grid capacity, delays in the issuance of building permits, opposition from local communities to the construction of wind farms and the lack of a stable institutional framework are among the most important barriers that inhibit the diffusion of the wind and PV solar power. The nature of the barriers identified in this study calls for policy intervention. - Highlights: • Firms in the Greek wind and solar power sectors assess RES barriers. • Lack of financial resources is the most important RES barrier. • Lack of a stable institutional framework negatively affects RES deployment. • The support of the public sector is crucial to the diffusion of RES. •Wind power faces strong legitimization barriers

  4. Ceramics research in a high-energy neutron source

    International Nuclear Information System (INIS)

    The studies on the irradiation effect to ceramics have added much to the basic understanding of their behavior, for example, the amorphous state of ceramics related to radiation-induced metamictization, the radiation-induced strengthening and toughening due to ultrafine defect aggregates, the in situ degradation of electrical resistivity, the role of radiation-induced defects on thermal conductivity and so on. Most of the irradiation testing on ceramics in the fields of structural and thermal properties have been carried out by using fast fission neutrons of about 1 MeV, but if this energy could be significantly changed, the size and nature of damage cascade and the quantity of transmutation gases produced would change. The significance of neutron source parameters, the special test requirement for ceramics such as the use of miniature specimens, the control of test environment, the transient reduction of electrical resistivity and so on are discussed. A special case of ceramic studies is that on new oxide superconductors. These materials can be made into amorphous state at about 1 dpa using 1 MeV electrons, and are considered to be fairly damage-sensitive. (K.I.)

  5. Fiscal Policy for Renewable Energy Sources and Its Economic Impact

    Directory of Open Access Journals (Sweden)

    Rita Helbra Tenrini

    2014-01-01

    Full Text Available Indonesia is the largest producers of palm oil. Along with the increasing demand for renewable energy source, palm oil will turn to be a very important commodity in the future. The palm oil industry will gain more value-added if they export the commodities in processed materials rather than raw materials. On the other hands palm oil industry more likely to export raw material, because there’s no incentives for them to export processed materials. Therefore, to give an incentive to palm oil industry, the government of Indonesia should give fiscal incentives to encourage palm oil industry to produce processed materials. The purpose of this study is to identify the appropriate fiscal policy to palm oil industry and to estimate the economic impact due to the implementation of fiscal incentives policy. The methodology used in this research is analysis using Social Accounting Matrix (SAM that can give an overview the impact of policy implementation to factors of production, an institution such as government and household, and other sectors including palm oil sectors itself. The result of this study that is the proposed fiscal policy in palm oil industry was fiscal incentives in the form of VAT exemption. Economic impact analysis that came from SAM indicates that implementation of the policy has an overall positive impact to factors of production, institution and sector.

  6. Energy source perceptions and policy support: Image associations, emotional evaluations, and cognitive beliefs

    International Nuclear Information System (INIS)

    This paper represents the most in-depth effort conducted to date to assess affective, emotional and cognitive perceptions of coal, natural gas, nuclear, and wind energy and the relationship between these perceptions and support for the energy sources. U.S. residents, recruited from a consumer panel, completed surveys assessing image associations, emotional reactions, and cognitive beliefs about energy sources and support for increased reliance on energy sources and local siting of energy facilities. The content of images produced by participants when evaluating energy sources revealed several interesting findings. Additionally, analysis of the image evaluations, emotions, and beliefs about each energy source showed that coal and nuclear energy were viewed most negatively, with natural gas in the middle, and wind viewed most positively. Importantly, these affective, emotional, and cognitive perceptions explained significant amounts of variance in support for each of the energy sources. Implications for future researchers and policy makers are discussed. - Highlights: ► Image associations, emotions, and beliefs about energy sources were measured. ► A dual-process model of energy support was proposed and tested. ► Coal and nuclear were viewed most negatively and wind was viewed most positively. ► The cognitive-affective model predicted support for each energy source.

  7. 16 CFR Table 4 to Part 1512 - Relative Energy Distribution of Sources

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 2 2010-01-01 2010-01-01 false Relative Energy Distribution of Sources 4... SUBSTANCES ACT REGULATIONS REQUIREMENTS FOR BICYCLES Pt. 1512, Table 4 Table 4 to Part 1512—Relative Energy Distribution of Sources Wave length (nanometers) Relative energy 380 9.79 390 12.09 400 14.71 410 17.68 420...

  8. Energy loss caused by shielding effect of steel cage outside source tube

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The energy loss, produced by shielding effect of steel cage outside the source tube, is quite considerable.With PENELOPE software package, MC results have been obtained based on the simulation of different source conformations. The result illustrates that the naked source tubes can improve the utilization ratio of the cobalt facilities. It demonstrates the applied value of the naked source tube in engineering.

  9. SPATIOTEMPORAL MODELING FOR ASSESSING COMPLEMENTARITY OF RENEWABLE ENERGY SOURCES IN DISTRIBUTED ENERGY SYSTEMS

    Directory of Open Access Journals (Sweden)

    L. Ramirez Camargo

    2015-07-01

    Full Text Available Spatial assessments of the potential of renewable energy sources (RES have become a valuable information basis for policy and decision-making. These studies, however, do not explicitly consider the variability in time of RES such as solar energy or wind. Until now, the focus is usually given to economic profitability based on yearly balances, which do not allow a comprehensive examination of RES-technologies complementarity. Incrementing temporal resolution of energy output estimation will permit to plan the aggregation of a diverse pool of RES plants i.e., to conceive a system as a virtual power plant (VPP. This paper presents a spatiotemporal analysis methodology to estimate RES potential of municipalities. The methodology relies on a combination of open source geographic information systems (GIS processing tools and the in-memory array processing environment of Python and NumPy. Beyond the typical identification of suitable locations to build power plants, it is possible to define which of them are the best for a balanced local energy supply. A case study of a municipality, using spatial data with one square meter resolution and one hour temporal resolution, shows strong complementarity of photovoltaic and wind power. Furthermore, it is shown that a detailed deployment strategy of potential suitable locations for RES, calculated with modest computational requirements, can support municipalities to develop VPPs and improve security of supply.

  10. Study of energy recovery and power generation from alternative energy source

    Directory of Open Access Journals (Sweden)

    Abdulhakim Amer A. Agll

    2014-11-01

    Full Text Available The energy requirement pattern of world is growing up and developing technology. The available sources, while exhausting and not friendly to the environment, are highly used. Looking at partial supply and different options of environment problems associated with usage, renewable energy sources are getting attention. MSW (Municipal solid waste composition data had been collected from 1997 to 2009, in Benghazi Libya, to evaluate the waste enthalpy. An incinerator with capacity of 47,250 kg/h was confirmed to burn all the quantity of waste generated by the city through the next 15 years. Initial study was performed to investigate energy flow and resource availability to insure sustainable MSW required by the incinerator to work at its maximum capacity during the designated period. The primary purpose of the paper is to discuss the design of Rankin steam cycle for the generation of both power (PG and combined heat power (CHP. In the power generation case, the system was found to be able to generate electrical power of 13.1 MW. Including the combined heat power case, the results showed that the system was able to produce 6.8 million m3/year of desalinated water and generate 11.33 MW of electricity. In conclusion, the CHP designed system has the greatest potential to maximize energy saving, due to the optimal combination of heat production and electricity generation.

  11. The energy sources and nuclear energy - The point of view of the Belgian Catholic Church

    International Nuclear Information System (INIS)

    The problems related to the environment are reported regularly to the public by means of the newspapers, on radio and television. The story is the product of a journalistic process and in general does not bear much resemblance to the original event. The rate and type of reportage depend not only on the body of data available to the journalist but on the information sources the journalist chosen to use. The same story is reported in a positive or negative way. Finally people are overwhelmed by contradictory information and became uncertain or frightened. In order to provide the general public with objective information about nuclear energy in particular and to made a statement about the position of the Belgian Catholic Church concerning this matter, the results of the study were published in Dutch under the form of a book with the title 'The Energy Sources and Nuclear Energy - Comparative analysis and ethical thoughts written the same author. Thia paper is a short survey of the results of the study and to present the point of view of the Belgian Catholic Church in the energy debate

  12. High fidelity nuclear energy system optimization towards an environmentally benign, sustainable, and secure energy source.

    Energy Technology Data Exchange (ETDEWEB)

    Tsvetkov, Pavel Valeryevich (Texas A& M University, College Station, TX); Rodriguez, Salvador B.; Ames, David E., II (Texas A& M University, College Station, TX); Rochau, Gary Eugene

    2009-09-01

    The impact associated with energy generation and utilization is immeasurable due to the immense, widespread, and myriad effects it has on the world and its inhabitants. The polar extremes are demonstrated on the one hand, by the high quality of life enjoyed by individuals with access to abundant reliable energy sources, and on the other hand by the global-scale environmental degradation attributed to the affects of energy production and use. Thus, nations strive to increase their energy generation, but are faced with the challenge of doing so with a minimal impact on the environment and in a manner that is self-reliant. Consequently, a revival of interest in nuclear energy has followed, with much focus placed on technologies for transmuting nuclear spent fuel. The performed research investigates nuclear energy systems that optimize the destruction of nuclear waste. In the context of this effort, nuclear energy system is defined as a configuration of nuclear reactors and corresponding fuel cycle components. The proposed system has unique characteristics that set it apart from other systems. Most notably the dedicated High-Energy External Source Transmuter (HEST), which is envisioned as an advanced incinerator used in combination with thermal reactors. The system is configured for examining environmentally benign fuel cycle options by focusing on minimization or elimination of high level waste inventories. Detailed high-fidelity exact-geometry models were developed for representative reactor configurations. They were used in preliminary calculations with Monte Carlo N-Particle eXtented (MCNPX) and Standardized Computer Analysis for Licensing Evaluation (SCALE) code systems. The reactor models have been benchmarked against existing experimental data and design data. Simulink{reg_sign}, an extension of MATLAB{reg_sign}, is envisioned as the interface environment for constructing the nuclear energy system model by linking the individual reactor and fuel component sub

  13. Design, fabrication and measurement of a novel cooling arm for fusion energy source

    OpenAIRE

    Jiang, Shui-Dong; Jing-quan LIU; Mei, Jia-Bin; Yang, Bin; Yang, Chun-Sheng

    2012-01-01

    The issues of energy and environment are the main constraint of sustainable development in worldwide. Nuclear energy source is one important optional choice for long term sustainable development. The nuclear energy consists of fusion energy and fission energy. Compared with fission, inertial confinement fusion (ICF) is a kind of clean fusion energy and can generate large energy and little environmental pollution. ICF mainly consists of peripheral driver unit and target. The cooling arm is an ...

  14. Solar-hydrogen energy as an alternative energy source for mobile robots and the new-age car

    Science.gov (United States)

    Sulaiman, A.; Inambao, F.; Bright, G.

    2014-07-01

    The disastrous effects of climate change as witnessed in recent violent storms, and the stark reality that fossil fuels are not going to last forever, is certain to create renewed demands for alternative energy sources. One such alternative source, namely solar energy, although unreliable because of its dependence on available sunlight, can nevertheless be utilised to generate a secondary source of energy, namely hydrogen, which can be stored and thereby provide a constant and reliable source of energy. The only draw-back with hydrogen, though, is finding efficient means for its storage. This study demonstrates how this problem can be overcome by the use of metal hydrides which offers a very compact and safe way of storing hydrogen. It also provides a case study of how solar and hydrogen energy can be combined in an energy system to provide an efficient source of energy that can be applied for modern technologies such as a mobile robot. Hydrogen energy holds out the most promise amongst the various alternative energy sources, so much so that it is proving to be the energy source of choice for automobile manufacturers in their quest for alternative fuels to power their cars of the future.

  15. Potential Ambient Energy-Harvesting Sources and Techniques

    Science.gov (United States)

    Yildiz, Faruk

    2009-01-01

    Ambient energy harvesting is also known as energy scavenging or power harvesting, and it is the process where energy is obtained from the environment. A variety of techniques are available for energy scavenging, including solar and wind powers, ocean waves, piezoelectricity, thermoelectricity, and physical motions. For example, some systems…

  16. Thermoelectricity without absorbing energy from the heat sources

    Science.gov (United States)

    Whitney, Robert S.; Sánchez, Rafael; Haupt, Federica; Splettstoesser, Janine

    2016-01-01

    We analyze the power output of a quantum dot machine coupled to two electronic reservoirs via thermoelectric contacts, and to two thermal reservoirs - one hot and one cold. This machine is a nanoscale analogue of a conventional thermocouple heat-engine, in which the active region being heated is unavoidably also exchanging heat with its cold environment. Heat exchange between the dot and the thermal reservoirs is treated as a capacitive coupling to electronic fluctuations in localized levels, modeled as two additional quantum dots. The resulting multiple-dot setup is described using a master equation approach. We observe an "exotic" power generation, which remains finite even when the heat absorbed from the thermal reservoirs is zero (in other words the heat coming from the hot reservoir all escapes into the cold environment). This effect can be understood in terms of a non-local effect in which the heat flow from heat source to the cold environment generates power via a mechanism which we refer to as Coulomb heat drag. It relies on the fact that there is no relaxation in the quantum dot system, so electrons within it have a non-thermal energy distribution. More poetically, one can say that we find a spatial separation of the first-law of thermodynamics (heat to work conversion) from the second-law of thermodynamics (generation of entropy). We present circumstances in which this non-thermal system can generate more power than any conventional macroscopic thermocouple (with local thermalization), even when the latter works with Carnot efficiency.

  17. Reprint of : Thermoelectricity without absorbing energy from the heat sources

    Science.gov (United States)

    Whitney, Robert S.; Sánchez, Rafael; Haupt, Federica; Splettstoesser, Janine

    2016-08-01

    We analyze the power output of a quantum dot machine coupled to two electronic reservoirs via thermoelectric contacts, and to two thermal reservoirs - one hot and one cold. This machine is a nanoscale analogue of a conventional thermocouple heat-engine, in which the active region being heated is unavoidably also exchanging heat with its cold environment. Heat exchange between the dot and the thermal reservoirs is treated as a capacitive coupling to electronic fluctuations in localized levels, modeled as two additional quantum dots. The resulting multiple-dot setup is described using a master equation approach. We observe an "exotic" power generation, which remains finite even when the heat absorbed from the thermal reservoirs is zero (in other words the heat coming from the hot reservoir all escapes into the cold environment). This effect can be understood in terms of a non-local effect in which the heat flow from heat source to the cold environment generates power via a mechanism which we refer to as Coulomb heat drag. It relies on the fact that there is no relaxation in the quantum dot system, so electrons within it have a non-thermal energy distribution. More poetically, one can say that we find a spatial separation of the first-law of thermodynamics (heat to work conversion) from the second-law of thermodynamics (generation of entropy). We present circumstances in which this non-thermal system can generate more power than any conventional macroscopic thermocouple (with local thermalization), even when the latter works with Carnot efficiency.

  18. Analysis of combined cooling, heating, and power systems based on source primary energy consumption

    Energy Technology Data Exchange (ETDEWEB)

    Fumo, Nelson; Chamra, Louay M. [Department of Mechanical Engineering, Mississippi State University, 210 Carpenter Engineering Building, P.O. Box ME, Mississippi State, MS 39762-5925 (United States)

    2010-06-15

    Combined cooling, heating, and power (CCHP) is a cogeneration technology that integrates an absorption chiller to produce cooling, which is sometimes referred to as trigeneration. For building applications, CCHP systems have the advantage to maintain high overall energy efficiency throughout the year. Design and operation of CCHP systems must consider the type and quality of the energy being consumed. Type and magnitude of the on-site energy consumed by a building having separated heating and cooling systems is different than a building having CCHP. Therefore, building energy consumption must be compared using the same reference which is usually the primary energy measured at the source. Site-to-source energy conversion factors can be used to estimate the equivalent source energy from site energy consumption. However, building energy consumption depends on multiple parameters. In this study, mathematical relations are derived to define conditions a CCHP system should operate in order to guarantee primary energy savings. (author)

  19. Virtual monochromatic imaging in dual-source dual-energy CT: Radiation dose and image quality

    OpenAIRE

    Yu, Lifeng; Christner, Jodie A.; Leng, Shuai; Wang, Jia; Fletcher, Joel G.; McCollough, Cynthia H.

    2011-01-01

    Purpose: To evaluate the image quality of virtual monochromatic images synthesized from dual-source dual-energy computed tomography (CT) in comparison with conventional polychromatic single-energy CT for the same radiation dose.

  20. CAS institute, US national lab ink MOU on renewable energy sources

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    @@ Amemorandum of understanding (MOU) for cooperation on renewable energy sources was signed between the CAS Institute of Electrical Engineering (IEE) and the US National Renewable Energy Laboratory (NREL) on 11 November,2008, in Beijing.

  1. Renewable energy source use in Brazil; Utilizacao de energia renovavel no Brasil

    Energy Technology Data Exchange (ETDEWEB)

    Newman, Joseph; Rosa, Fabio, e-mails: jnewman@winrock.org.br, e-mail: fabrosa@terra.com.br

    2003-08-15

    This article evaluates the programs (PROINFA and CCC) developed by the State to deploy a policy of using renewable energy sources in Brazil, highlighting the biodiesel, which should be inserted in its energy matrix.

  2. Alternate Funding Sources for the International Atomic Energy Agency

    Energy Technology Data Exchange (ETDEWEB)

    Toomey, Christopher; Wyse, Evan T.; Kurzrok, Andrew J.; Swarthout, Jordan M.

    2012-09-04

    Since 1957, the International Atomic Energy Agency (IAEA) has worked to ensure the safe and responsible promotion of nuclear technology throughout the world. The IAEA operates at the intersection of the Nuclear Nonproliferation Treaty’s (NPT) fourth and third articles, which guarantee Parties to the Treaty the right to peaceful uses of nuclear technology, provided those activities are placed under safeguards verified by the IAEA. However, while the IAEA has enjoyed substantial success and prestige in the international community, there is a concern that its resources are being stretched to a point where it may no longer be possible to execute its multifaceted mission in its entirety. As noted by the Director General (DG) in 2008, demographics suggest that every aspect of the IAEA’s operations will be in higher demand due to increasing reliance on non-carbon-based energy and the concomitant nonproliferation, safety, and security risks that growth entails. In addition to these nuclear energy concerns, the demand for technical developmental assistance in the fields of food security, resource conservation, and human health is also predicted to increase as the rest of the world develops. Even with a 100% value-for-money rating by the U.S. Office of Management and Budget (OMB) and being described as an “extraordinary bargain” by the United Nations Secretary-General’s High-level Panel on Threats, Challenges and Change, real budget growth at the Agency has been limited to zero-real growth for a better part of the last two decades. Although the 2012 regular budget (RB) received a small increase for most programs, the 2013 RB has been set at zero-real growth. As a result, the IAEA has had to defer infrastructure investments, which has hindered its ability to provide the public goods its Members seek, decreased global security and development opportunities, and functionally transformed the IAEA into a charity, dependent on extrabudgetary (EB) contributions to sustain

  3. SIMULATION OF THE SYSTEMS WITH RENEWABLE ENERGY SOURCES USING HOMER SOFTWARE

    Directory of Open Access Journals (Sweden)

    FIRINCĂ S.D.

    2015-12-01

    Full Text Available This paper simulates by using the Homer software, distributed energy systems with capacity below 1 MW. Among the renewable energy sources are used wind and solar energy. For photovoltaic panels, we are considering two situations: fixed panels, oriented at 45 ° and panels with tracking system with two axis. Simulation results contain information regarding operation hours of the system throughout the year, energy produced from the renewable energy sources, energy consumption for the load, and excess of electrical energy. The Homer software also allows an economic analysis of these systems.

  4. Investigation the Interest Rate of Each Energy Source on Optimal Sizing of Distributed Energy Resources

    Directory of Open Access Journals (Sweden)

    Bahram Fathi

    2011-08-01

    Full Text Available In this research the effect of variation of interest rate of each energy source on optimal results are investigated. This study presents an optimized design of Hybrid Power System in a distribution system including sources like, photovoltaic array, fuel cell and battery bank. In this study, an algorithm has been developed for evaluation and cost optimization Hybrid Power System. The costs include capital cost, replacement cost, operation and maintenance cost, fuel cost and production cost for Hybrid Power System and DG power during different load profile. Then an objective function with aim to minimizing of total costs has been considered. A genetic algorithm approach is employed to obtain the best cost value of Hybrid Power System construction.

  5. Sustainable Sources of Energy and the Expected Benefits to Nigerian Economy

    OpenAIRE

    Anowor, Oluchukwu F.; Achukwu, Innocent I.; Ezekwem, Ogochukwu S.

    2014-01-01

    Sustainable development entails conservation, preservation, accessibility and affordability. When it comes to energy usage, Nigeria relies mostly on conventional source of energy with quite high opportunity cost making it cost-wise comparatively inaccessible for the poor population. In this work, renewable energy sources like solar radiation which is abundantly present in Nigeria was found to offers a much cheaper alternative in meeting the energy demands since they are derived from natural p...

  6. TBEE: Tier Based Energy Efficient Protocol Providing Sink and Source Mobility in Wireless Sensor Networks

    OpenAIRE

    Siddhartha Chauhan; Lalit Awasthi

    2011-01-01

    In resource constrained wireless sensor networks (WSNs) it is important to utilize energy efficiently. Data dissemination is mainly responsible for the consumption of energy in sensor nodes (SNs). The data dissemination protocols for WSNs should reduce the energy consumption of the SNs. Sink and source mobility is the major challenge for data dissemination protocols. In this paper, a Tier based Energy Efficient protocol (TBEE) providing sink and source mobility in WSNs has been proposed. TBEE...

  7. Opportunities of energy supply of farm holdings on the basis of small-scale renewable energy sources

    Science.gov (United States)

    Efendiev, A. M.; Nikolaev, Yu. E.; Evstaf'ev, D. P.

    2016-02-01

    One of the major national economic problems of Russia is raising of agricultural production, which will provide strategic security and sustainable supply of the population with provisions. Creation of subsidiary small holdings, farm holdings, and peasant farm holdings will require addressing issues of energy supply. At considerable distance of small farms from centralized energy systems (by fuel, electricity and thermal energy) it is proposed to create a system of local energy networks on the basis of low-powered power plants using renewable energy sources (RES). There is economic unreasonableness of use of imported components of small power plants. Creation of new combined small power plants on renewable energy sources produced by domestic manufacturers is recommended. Schemes of arrangements of small power plants based on renewable energy sources are proposed, variants and characteristics of a basic source are provided—biogas plants developed by the authors. Calculations revealed that heat and power supply of self-contained farms distant from small power plants based on renewable energy sources is 2.5-2.6 times cheaper than from centralized networks. Production of biogas through anaerobic fermentation of organic waste of cattle complexes is considered as the basis. The analysis of biowaste output in various cattle farms is carried out, and the volume of biogas is determined to meet the requirements of these farms in electrical and thermal energy. The objective of the present article is to study the possibility of creating small combined power plants in Russia based on renewable sources of energy for independent consumers.

  8. Oil crops: requirements and possibilities for their utilization as an energy source

    International Nuclear Information System (INIS)

    Although vegetable oils have been used as an energy source for centuries, they were used almost exclusively in oil lamps. Their value as a foodstuff and the availability and low price of mineral oil had for a long time kept them from being seriously considered as a potential energy source. Now, owing to the increasing cost of fossil fuel, particularly oil, and increasing industrial energy consumption, as well as the negative impact of fossil fuel use on the environment, there is interest in a number of alternative energy sources, including vegetable oils. The discussion in this paper focuses on the use of untreated vegetable oils, particularly rapeseed oil. The energy potential of rapeseed oil is explored first. Then, conditions under which the use of oil crops as an energy source is feasible are briefly discussed; two concepts for decentralized oil-seed processing are described and, finally, future possibilities for use of vegetable oils as a fuel source are reviewed. (author)

  9. Space-time dependence between energy sources and climate related energy production

    Science.gov (United States)

    Engeland, Kolbjorn; Borga, Marco; Creutin, Jean-Dominique; Ramos, Maria-Helena; Tøfte, Lena; Warland, Geir

    2014-05-01

    The European Renewable Energy Directive adopted in 2009 focuses on achieving a 20% share of renewable energy in the EU overall energy mix by 2020. A major part of renewable energy production is related to climate, called "climate related energy" (CRE) production. CRE production systems (wind, solar, and hydropower) are characterized by a large degree of intermittency and variability on both short and long time scales due to the natural variability of climate variables. The main strategies to handle the variability of CRE production include energy-storage, -transport, -diversity and -information (smart grids). The three first strategies aim to smooth out the intermittency and variability of CRE production in time and space whereas the last strategy aims to provide a more optimal interaction between energy production and demand, i.e. to smooth out the residual load (the difference between demand and production). In order to increase the CRE share in the electricity system, it is essential to understand the space-time co-variability between the weather variables and CRE production under both current and future climates. This study presents a review of the literature that searches to tackle these problems. It reveals that the majority of studies deals with either a single CRE source or with the combination of two CREs, mostly wind and solar. This may be due to the fact that the most advanced countries in terms of wind equipment have also very little hydropower potential (Denmark, Ireland or UK, for instance). Hydropower is characterized by both a large storage capacity and flexibility in electricity production, and has therefore a large potential for both balancing and storing energy from wind- and solar-power. Several studies look at how to better connect regions with large share of hydropower (e.g., Scandinavia and the Alps) to regions with high shares of wind- and solar-power (e.g., green battery North-Sea net). Considering time scales, various studies consider wind

  10. Valuation of environmental and societal trade-offs of renewable energy sources

    International Nuclear Information System (INIS)

    Use of renewable energy sources is one solution to decrease green house gas emissions and the use of polluting fossil fuels. Renewables differ in their environmental and societal impacts, and to design sound renewable energy policy, societies need to assess the trade-offs between alternative sources. To enable the evaluation and comparison of renewable energy production alternatives in Finland, this paper applies the choice experiment to elicit the monetary information on people's preferences for four renewable energy sources: wind power, hydro power and energy from crops and wood, and considers four impacts of energy production: effects on biodiversity, local jobs, carbon emissions and household's electricity bill. The nested logit analysis reveals that higher income, male gender, young age, and pro-environmental attitude increase the probability to choose renewable energy instead of the current energy mix. Wind power is, on average, the most popular renewable energy technology, but regional differences exist. Biodiversity deterioration should be avoided. The national aggregate willingness to pay, based on stated preferences rather than preferences revealed by actual market behavior, for a combination of renewable energy technologies that corresponds to Finland's climate change and energy policy is over 500 million Euros. - Highlights: • Preferences for renewable energy sources are elicited with choice experiment. • Wind power is the most popular source in general. • Regional differences exist: energy from wood is favored in rural areas. • Biodiversity deterioration should be avoided

  11. Green cooperative communication network using solar energy sources

    Directory of Open Access Journals (Sweden)

    Sanjay kumar

    2016-08-01

    Full Text Available Solar energy has experienced phenomenal growth in recent years due to both technological improvements resulting in cost reductions and government policies supportive of renewable energy development and utilization. This study analyzes the technical, economic and policy aspects of solar energy development and deployment. While the cost of solar energy has declined rapidly in the recent past, it still remains much higher than the cost of conventional energy technologies. Like other renewable energy technologies, solar energy benefits from fiscal and regulatory incentives and mandates, including tax credits and exemptions, feed-in-tariff, preferential interest rates, renewable portfolio standards and voluntary green power programs in many countries. Potential expansion of carbon credit markets also would provide additional incentives to solar energy deployment; however, the scale of incentives provided by the existing carbon market instruments, such as the Clean Development Mechanism of the Kyoto Protocol, is limited. Despite the huge technical potential, development and large-scale, market-driven deployment of solar energy technologies worldwide still has to overcome a number of technical and financial barriers. Unless these barriers are overcome, maintaining and increasing electricity supplies from solar energy will require continuation of potentially costly policy support. Indexing terms/

  12. Some successful financing mechanisms for energy efficiency projects (EE) and projects using renewable energy sources (RES) - the experience of Bulgaria

    International Nuclear Information System (INIS)

    The paper analysis some of the most promising financial mechanisms for energy efficiency (EE) and renewable energy sources (RES) projects in Bulgaria - the TPF mechanism, the KIDS Fund, delivered by the EBRD fund the EE fund of the WB, established on the floor of the EE act, as well as a number of some of the pre accession and European energy programs used for financing this area. All data its rich intensive international and in -home work in the are of energy efficiency and renewable energy sources. (Author)

  13. Comparison of the Total Costs of Renewable and Conventional Energy Sources

    Science.gov (United States)

    Gejguš, Mirko; Aschbacher, Christine; Sablik, Jozef

    2016-06-01

    Renewable energy sources can be characterised as inexhaustible. The question is to what extent they are available and the complementary limit issue is technology. Renewable energy sources are theoretically available to the whole world, but their limit factor is more or less the volatility of storage.

  14. Determination of activation level energy of nuclear isomers by calibration of microspectra of radioactive sources

    International Nuclear Information System (INIS)

    Nuclear isomers with unknown activation level were irradiated by calibrated radioactive sources. The integral cross sections were calculated for different energies of the sources. The activation energy was given by values coinciding with each other within the limits of error. The method made the determination of the unknown level of 1180+-10 keV of 195Pt nucleus possible. (author)

  15. Analysis of petroleum company investments in nonpetroleum energy sources. Book II. Appendices

    Energy Technology Data Exchange (ETDEWEB)

    Ryan, P. Jr.; Ryan, T.C.

    1979-12-12

    Financial data from the analysis of investment strategies of US oil companies and the depth of their present and future investments in nonpetroleum energy sources are tabulated in these appendices. The nonpetroleum energy sources included in the study are: coal, oil shale, geothermal, and solar.

  16. Control and design of full-bridge three-level converter for renewable energy sources

    DEFF Research Database (Denmark)

    Yao, Zhilei; Xu, Jing; Guerrero, Josep M.

    2015-01-01

    Output voltage of renewable energy sources, such as fuel cell and PV cell, is often low and varies widely with load and environmental conditions. Therefore, the high step-up DC-DC converter is needed between renewable energy sources and the grid-connected inverter. However, voltage stress...

  17. Effects of postweaning dietary energy source on reproductive traits in primiparous sows

    NARCIS (Netherlands)

    Brand, van den H.; Langendijk, P.; Soede, N.M.; Kemp, B.

    2001-01-01

    An experiment was conducted to study the effects of major dietary energy source fed from weaning to ovulation or from ovulation to d 35 of pregnancy on reproductive traits in primiparous sows. Dietary energy sources were used to manipulate the plasma insulin concentration. One hundred thirteen sows

  18. New fusion method offers hope of new energy source

    CERN Multimedia

    Chang, K

    2002-01-01

    Scientists from Sandia National Laboratories have reported that they have acheived thermonuclear fusion using the Z accelerator. It is the first observation of fusion using a pulsed power source (1 page).

  19. Fuel Cells for Balancing Fluctuation Renewable Energy Sources

    DEFF Research Database (Denmark)

    Mathiesen, Brian Vad

    2007-01-01

    In the perspective of using fuel cells for integration of fluctuating renewable energy the SOFCs are the most promising. These cells have the advantage of significantly higher electricity efficiency than competing technologies and fuel flexibility. Fuel cells in general also have the advantage of...... with hydrogen production or electric cars, and on the other hand using biomass and bio fuels [11]. Fuel cells can have an important role in these future energy systems.......In the perspective of using fuel cells for integration of fluctuating renewable energy the SOFCs are the most promising. These cells have the advantage of significantly higher electricity efficiency than competing technologies and fuel flexibility. Fuel cells in general also have the advantage...... flexibility, such as SOFCs, heat pumps and heat storage technologies are more important than storing electricity as hydrogen via electrolysis in energy systems with high amounts of wind [12]. Unnecessary energy conversions should be avoided. However in future energy systems with wind providing more than 50...

  20. Optimal combination of energy storages for prospective power supply systems based on Renewable Energy Sources

    CERN Document Server

    Weitemeyer, Stefan; Siemer, Lars; Agert, Carsten

    2016-01-01

    Prospective power supply systems based on Renewable Energy Sources require measures to balance power generation and load at all times. The utilisation of storage devices and backup power plants is widely suggested for this purpose, whereas the best combination is still to be found. In this work, we present a modelling approach to systematically study scenarios of future power supply systems with a high share of electricity originating from wind and solar resources. By considering backup as a subordinate source of electricity with energy-only costs, the approach is independent of the actual full-load hours of the backup power plants. Applying the approach to multi-year meteorological data for Germany, cost-optimised combinations of storage devices and backup power are identified. We find that even in scenarios with significant excess generation capacities there is a need for storage devices or backup power plants with discharging power on the same order as the average load to balance the system at all times. F...

  1. Energy from Waste: Reuse of Compost Heat as a Source of Renewable Energy

    Directory of Open Access Journals (Sweden)

    G. Irvine

    2010-01-01

    Full Text Available An in-vessel tunnel composting facility in Scotland was used to investigate the potential for collection and reuse of compost heat as a source of renewable energy. The amount of energy offered by the compost was calculated and seasonal variations analysed. A heat exchanger was designed in order to collect and transfer the heat. This allowed heated water of 47.3oC to be obtained. The temperature could be further increased to above 60oC by passing it through multiple tunnels in series. Estimated costs for installing and running the system were calculated. In order to analyse these costs alternative solar thermal and ground source heat pump systems were also designed. The levels of supply and economic performance were then compared. A capital cost of £11,662 and operating cost of £1,039 per year were estimated, resulting in a cost of £0.50 per kWh for domestic water and £0.10 per kWh for spatial heat. Using the heat of the compost was found to provide the most reliable level of supply at a similar price to its rivals.

  2. Dynamic Compression-Transmission for Energy-Harvesting Multihop Networks with Correlated Sources

    CERN Document Server

    Tapparello, Cristiano; Rossi, Michele

    2012-01-01

    Energy-harvesting wireless sensor networking is an emerging technology with applications to various fields such as environmental and structural health monitoring. A distinguishing feature of wireless sensors is the need to perform both source coding tasks, such as measurement and compression, and transmission tasks. It is known that the overall energy consumption for source coding is generally comparable to that of transmission, and that a joint design of the two classes of tasks can lead to relevant performance gains. Moreover, the efficiency of source coding in a sensor network can be potentially improved via distributed techniques by leveraging the fact that signals measured by different nodes are correlated. In this paper, a data gathering protocol for multihop wireless sensor networks with energy harvesting capabilities is studied whereby the sources measured by the sensors are correlated. Both the energy consumptions of source coding and transmission are modeled, and distributed source coding is assumed...

  3. Assessment of dynamic energy conversion systems for radioisotope heat sources

    International Nuclear Information System (INIS)

    The use of dynamic conversion systems to convert the heat generated in a 7500 W(t) 90 Sr radioisotopic heat source to electricity is examined. The systems studies were Stirling; Brayton Cycle; three organic Rankines (ORCs) (Barber-Nichols/ORMAT, Sundstrand, and TRW); and an organic Rankine plus thermoelectrics. The systems were ranked for a North Warning System mission using a Los Alamos Multiattribute Decision Theory code. Three different heat source designs were used: case I with a beginning of life (BOL) source temperature of 640 C, case II with a BOL source temperature of 7450C, and case III with a BOL source temperature of 9450C. The Stirling engine system was the top-ranked system of cases I and II, closely followed by the ORC systems in case I and ORC plus thermoelectrics in case II. The Brayton cycle system was top-ranked for case III, with the Stirling engine system a close second. The use of 238Pu in heat source sizes of 7500 W(t) was examined and found to be questionable because of cost and material availability and because of additional requirements for analysis of safeguards and critical mass

  4. Proceedings of condensed papers on alternate energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Veziroglu, T.N. (ed.)

    1979-01-01

    The conference covers the results of research and developments which have taken place during the last 2 years. It includes sessions on solar energy, ocean thermal energy, wind energy, hydro power, nuclear breeders and nuclear fusion, synthetic fuels from coal or waste, hydrogen production and uses. The volume of the Proceedings presents the papers and lectures in condensed format grouped by their subjects under 40 technical sessions. Condensed papers are presented for the 336 presentations; abstracts have previously appeared in the DOE Energy Data Base for 33 of the full-length papers.

  5. Thorium: An energy source for the world of tomorrow

    OpenAIRE

    Revol J.-P.

    2015-01-01

    To meet the tremendous world energy needs, systematic R&D has to be pursued to replace fossil fuels. Nuclear energy, which produces no green house gases and no air pollution, should be a leading candidate. How nuclear energy, based on thorium rather than uranium, could be an acceptable solution is discussed. Thorium can be used both to produce energy and to destroy nuclear waste. The thorium conference, organized by iThEC at CERN in October 2013, has shown that thorium is seriously considered...

  6. Solar energy: an environment friendly reliable and sustainable source

    International Nuclear Information System (INIS)

    The rapid enhancement in consumption of fossil fuels in order to meet the day-to day increasing energy requirements has blown a danger sign for all nations. Global warming effect has compelled researchers to discover other techniques of energy generation instead of traditional ways in order to reduce adverse effects on global terrain. Renewable energy resources have got attention of global entrepreneurs due to their long lasting availability and environment friendliness. Solar technology is finding increased application in both domestic and military application. This paper discusses the ideas behind the art of design of solar cells and their historical developments. It also covers the kind of techniques/ methodologies used for solar energy conversion into electrical energy with comparison between different renewable technologies and solar technology. This paper gives the brief review of world energy resources and their consumption v/s Solar energy production percentage. Researchers in the field of energy generation have impressed by the Prodigious results of Renewable Energies. Today's most of the high ranked international universities of developed countries in collaboration with government/ industries have been carrying on advance researches in the field of renewable technologies. (author)

  7. Selecting sustainable renewable energy source for energy assistance to North Korea

    Energy Technology Data Exchange (ETDEWEB)

    Yi, Sul-Ki [Korea Electrical Engineering and Science Research Institute, Bldg 130, Seoul National University, 599 Gwanangno, Gwanak-gu, Seoul 151-742 (Korea, Republic of); Sin, Hwa-Young; Heo, Eunnyeong [Department of Energy Systems Engineering, Seoul National University, 599, Gwanang-no, Gwanak-Gu, Seoul 157-742 (Korea, Republic of)

    2011-01-15

    Renewable energy (RE) is the best sustainable energy solution South Korea can provide to assist North Korea in overcoming its chronic energy shortage. Designed as a follow-on research to Sin et al., a survey was conducted with a panel of experts consisting of various disciplines and affiliations using the analytic hierarchy process (AHP) with benefit, opportunity, cost, and risk (BOCR). The results showed the panel viewed security as the most important factor among the strategic criteria. For the level 1 attributes, the panel showed no significant differences of opinion among the different alternatives; however, cost showed to be the most important factor for the panel. The panel chose wind power as the best alternative source of energy for North Korea; however, there were some differences in opinion among the sub-groups of the panel depending on the composition and the expertise of the sub-group. Compared to other studies on the similar topic, this research stands out in that the research results were derived using AHP and BOCR and that the panel was composed of both Korean and foreign experts on North Korea affiliated with state-run research organizations, armed forces, non-governmental organizations, academic research organizations, private consulting firms, and journalism. The research arrived at the conclusion that the following factors must be considered as South Korea designs its future North Korean energy assistance policy: (1) RE assistance for North Korea can take on various forms; hence, experts consulted during the design, writing, and implementation phases of the policy in question must possess knowledge and expertise in the appropriate technology and methodology being considered; (2) possibility of a sudden destabilization of the Northeast Asian security paradigm due to the collapse of North Korea; and (3) continued nuclearization of North Korea. (author)

  8. Thorium: An energy source for the world of tomorrow

    Science.gov (United States)

    Revol, J.-P.

    2015-08-01

    To meet the tremendous world energy needs, systematic R&D has to be pursued to replace fossil fuels. Nuclear energy, which produces no green house gases and no air pollution, should be a leading candidate. How nuclear energy, based on thorium rather than uranium, could be an acceptable solution is discussed. Thorium can be used both to produce energy and to destroy nuclear waste. The thorium conference, organized by iThEC at CERN in October 2013, has shown that thorium is seriously considered by some major developing countries as a key element of their energy strategy. However, developed countries do not seem to move fast enough in that direction, while global cooperation is highly desirable in this domain. Thorium is not fissile. Various possible ways of using thorium will be reviewed. However, an elegant option is to drive an "Accelerator Driven System (ADS)" with a proton accelerator, as suggested by Nobel Prize laureate Carlo Rubbia .

  9. Thorium: An energy source for the world of tomorrow

    Directory of Open Access Journals (Sweden)

    Revol J.-P.

    2015-01-01

    Full Text Available To meet the tremendous world energy needs, systematic R&D has to be pursued to replace fossil fuels. Nuclear energy, which produces no green house gases and no air pollution, should be a leading candidate. How nuclear energy, based on thorium rather than uranium, could be an acceptable solution is discussed. Thorium can be used both to produce energy and to destroy nuclear waste. The thorium conference, organized by iThEC at CERN in October 2013, has shown that thorium is seriously considered by some major developing countries as a key element of their energy strategy. However, developed countries do not seem to move fast enough in that direction, while global cooperation is highly desirable in this domain. Thorium is not fissile. Various possible ways of using thorium will be reviewed. However, an elegant option is to drive an “Accelerator Driven System (ADS” with a proton accelerator, as suggested by Nobel Prize laureate Carlo Rubbia .

  10. Impact of novel energy sources: OTEC, wind, goethermal, biomass

    Science.gov (United States)

    Roberts, A. S., Jr.

    1978-01-01

    Alternate energy conversion methods such as ocean thermal energy conversion (OTEC), wind power, geothermal wells and biomass conversion are being explored, and re-examined in some cases, for commercial viability. At a time when United States fossil fuel and uranium resources are found to be insufficient to supply national needs into the twenty-first century, it is essential to broaden the base of feasible energy conversion technologies. The motivations for development of these four alternative energy forms are established. Primary technical aspects of OTEC, wind, geothermal and biomass energy conversion systems are described along with a discussion of relative advantages and disadvantages of the concepts. Finally, the sentiment is voiced that each of the four systems should be developed to the prototype stage and employed in the region of the country and in the sector of economy which is complimentary to the form of system output.

  11. Green power grids: how energy from renewable sources affects network and markets

    CERN Document Server

    Mureddu, Mario; Chessa, Alessandro; Scala, Antonio; Damiano, Alfonso

    2015-01-01

    The increasing attention to environmental issues is forcing the implementation of novel energy models based on renewable sources, fundamentally changing the configuration of energy management and introducing new criticalities that are only partly understood. In particular, renewable energies introduce fluctuations causing an increased request of conventional energy sources oriented to balance energy requests on short notices. In order to develop an effective usage of low-carbon sources, such fluctuations must be understood and tamed. In this paper we present a microscopic model for the description and the forecast of short time fluctuations related to renewable sources and to their effects on the electricity market. To account for the inter-dependencies among the energy market and the physical power dispatch network, we use a statistical mechanics approach to sample stochastic perturbations on the power system and an agent based approach for the prediction of the market players behavior. Our model is a data-d...

  12. The Highest-Energy Cosmic Rays Cannot be Dominantly Protons from Steady Sources

    CERN Document Server

    Fang, Ke

    2016-01-01

    The bulk of observed ultrahigh energy cosmic rays could be light or heavier elements, and originate from an either steady or transient population of sources. This leaves us with four general categories of sources. Energetic requirements set a lower limit on single source luminosities, while the distribution of particle arrival directions in the sky sets a lower limit on the source number density. The latter constraint depends on the angular smearing in the skymap due to the magnetic deflections of the charged particles during their propagation from the source to the Earth. We contrast these limits with the luminosity functions from surveys of existing luminous steady objects in the nearby universe, and strongly constrain one of the four categories of source models, namely, steady proton sources. The possibility that cosmic rays with energy $> 8\\times 10^{19}\\,$eV are dominantly pure protons coming from steady sources is excluded at 95\\% confidence level, under the safe assumption that protons experience less ...

  13. Two-Pion Interferometry for the Granular Source in Heavy Ion Collisions at LHC Energies

    Institute of Scientific and Technical Information of China (English)

    尹洪杰; 安飞; 张卫宁

    2012-01-01

    The space-time characters of the pion-emitting sources produced in the heavy ion collisions at the Large Hadron Collider (LHC) energies are investigated in a granular source model of quark-gluon plasma droplets. The results of two-pion interferometry indicate that the longi- tudinal interferometry radius is sensitive to the initial breakup time of the system. For a larger breakup time the values of the longitudinal interferometry radius for the LHC source are larger than that of the source produced in the collisions at the Relativistic Heavy Ion Collider's (RHIC) top energy. However, the values of the longitudinal radius are smaller if the source fragments at a smaller breakup time with a higher initial temperature of the droplets. The values of the transverse interferometry radius in the "side" direction for the LHC sources are larger than those for the RHIC source. The imaging analyses for the characteristic quantities of the granular sources are consistent with the interferometry radii.

  14. Energy use in Kenya: advancement of alternative energy sources to mitigate climate change through Activities Implemented Jointly

    Energy Technology Data Exchange (ETDEWEB)

    Ogola, J.S.; Omulo, M.A. [Climate Network Africa, Nairobi (Cayman Islands)

    1998-08-01

    The main energy sources in Kenya are biomass, hydropower and geothermal. The source of biomass fuel includes fuelwood, crop residues and animal waste; woodfuel processed through carbonization; biogas from animal waste processed through fermentation; power alcohol and waste-wood from industries. Woodfuel in 1992 provided about 70% of Kenya`s total energy supply. The annual energy consumption in Kenya is about 7 million tonnes of oil equivalent. The main consumers of energy are domestic household, 60%; transport and manufacturing, 13% each, agriculture, 10%; and commercial sector, 6%. Petroleum fuels account for about 20% of the net energy and meets about 86% of the industrial energy demand. The ability to produce hydropower is sensitive to climate-induced water supply changes as power generation turbines operates within a small range of water level variability. Global warming is likely to increase precipitation in the highlands of Kenya. This is bound to affect the five hydropower generating plants along Tana River which contribute about 78% to the national electricity grid. However, increased exploitation of the geothermal resources at Olkaria, Eburru and Lake Bogoria could alleviate the situation once the targeted output of 1000 MW is achieved. The paper carries out a review of the potential energy sources in the country and proposes a country study on the use of renewable sources of energy particularly among the rural population who currently rely heavily on fuelwood as a source of energy. The paper finally proposes specific projects for the AIJ undertaking. (author)

  15. High fidelity nuclear energy system optimization towards an environmentally benign, sustainable, and secure energy source.

    Energy Technology Data Exchange (ETDEWEB)

    Tsvetkov, Pavel Valeryevich (Texas A& M University, College Station, TX); Rodriguez, Salvador B.; Ames, David E., II (Texas A& M University, College Station, TX); Rochau, Gary Eugene

    2010-10-01

    A new high-fidelity integrated system method and analysis approach was developed and implemented for consistent and comprehensive evaluations of advanced fuel cycles leading to minimized Transuranic (TRU) inventories. The method has been implemented in a developed code system integrating capabilities of Monte Carlo N - Particle Extended (MCNPX) for high-fidelity fuel cycle component simulations. In this report, a Nuclear Energy System (NES) configuration was developed to take advantage of used fuel recycling and transmutation capabilities in waste management scenarios leading to minimized TRU waste inventories, long-term activities, and radiotoxicities. The reactor systems and fuel cycle components that make up the NES were selected for their ability to perform in tandem to produce clean, safe, and dependable energy in an environmentally conscious manner. The diversity in performance and spectral characteristics were used to enhance TRU waste elimination while efficiently utilizing uranium resources and providing an abundant energy source. A computational modeling approach was developed for integrating the individual models of the NES. A general approach was utilized allowing for the Integrated System Model (ISM) to be modified in order to provide simulation for other systems with similar attributes. By utilizing this approach, the ISM is capable of performing system evaluations under many different design parameter options. Additionally, the predictive capabilities of the ISM and its computational time efficiency allow for system sensitivity/uncertainty analysis and the implementation of optimization techniques.

  16. China's conception of energy security : sources and international impacts

    International Nuclear Information System (INIS)

    The unique challenges and opportunities associated with China's rapid economic growth were discussed with reference to the potential risk of political disruption or destabilizing international markets. The author notes that two common mistakes are typically made when assessing the evolution of China's energy policy. The first is that China's future path is assimilated with that of developed countries, thereby dismissing evidence that might point toward a different relationship with energy. Second, analysts tend to focus on the external expression of China's energy needs, its oil imports, while overlooking other energy-related issues such as insufficient electricity supplies or environmental degradation. The author argues that Chinese leadership is redefining its understanding of what constitutes energy security for the country. This report assesses the international impacts of such a redefinition along with the international aspects of a business-as-usual scenario in which China pursues its traditional model of energy security. It was emphasized that two different views of energy security lead to different sets of challenges and opportunities for western governments and businesses. 101 refs., 2 figs

  17. Clean Energy Innovation: Sources of Technical and Commercial Breakthroughs

    Energy Technology Data Exchange (ETDEWEB)

    Perry, T. D., IV; Miller, M.; Fleming, L.; Younge, K.; Newcomb, J.

    2011-03-01

    Low-carbon energy innovation is essential to combat climate change, promote economic competitiveness, and achieve energy security. Using U.S. patent data and additional patent-relevant data collected from the Internet, we map the landscape of low-carbon energy innovation in the United States since 1975. We isolate 10,603 renewable and 10,442 traditional energy patents and develop a database that characterizes proxy measures for technical and commercial impact, as measured by patent citations and Web presence, respectively. Regression models and multivariate simulations are used to compare the social, institutional, and geographic drivers of breakthrough clean energy innovation. Results indicate statistically significant effects of social, institutional, and geographic variables on technical and commercial impacts of patents and unique innovation trends between different energy technologies. We observe important differences between patent citations and Web presence of licensed and unlicensed patents, indicating the potential utility of using screened Web hits as a measure of commercial importance. We offer hypotheses for these revealed differences and suggest a research agenda with which to test these hypotheses. These preliminary findings indicate that leveraging empirical insights to better target research expenditures would augment the speed and scale of innovation and deployment of clean energy technologies.

  18. Issues, Challenges, Causes, Impacts and Utilization of Renewable Energy Sources - Grid Integration

    OpenAIRE

    Er. Mamatha Sandhu; Dr.Tilak Thakur

    2014-01-01

    The renewable energy sources have increased significantly due to environmental issues and fossil fuels elevated cost. Integration of renewable energy sources to utility grid depends on the scale of power generation. Large scale power generations are connected to transmission systems where as small scale distributed power generation is connected to distribution systems. There are certain challenges in the integration of both types of systems directly. Due to this, wind energy h...

  19. The current state of nonconventional sources of energy and related perspectives

    OpenAIRE

    Paulo César Narváez Rincón

    2010-01-01

    This article presents an overview of world and Colombian energy sources, including distribution, production and consumption by fuel and end-user sectors, respectively, as well as a brief description of some non-conventional energy sources (NCES), pointing out those classified as bioenergy and used as non-conventional fuels in the transport and electricity generating sectors. Colombian policies for promoting the rational use of energy (RUE) and NCES are presented and their targets are compared...

  20. Fuel-efficiency of hydrogen and heat storage technologies for integration of fluctuating renewable energy sources

    OpenAIRE

    Mathiesen, Brian Vad; Lund, Henrik

    2005-01-01

    This paper presents the methodology and results of analysing the use of different energy storage technologies in the task of integration of fluctuating renewable energy sources (RES) into the electricity supply. The analysis is done on the complete electricity system including renewable energy sources as well as power plants and CHP (Combined heat and power production). Emphasis is put on the need for ancillary services. Devices to store electricity as well as devices to store heat can be use...

  1. Analysis of the Types of Subsidies for Renewable Energy Sources in the Czech Republic

    OpenAIRE

    DVOŘÁKOVÁ, Kristýna

    2014-01-01

    This bachelor thesis deals with renewable energy sources (RES) in the Czech Republic. The theoretical part of the work describes the most widely used renewable energy sources in the Czech Republic, especially their history technology, advantages and disadvantages. It also deals with the legislation of the European Union and the Czech Republic, describes the laws and mentions the State Energy Policy of the CR and the National Action Plan of the CR, which are essential to the operation and d...

  2. Green Minefield. Renewable sources of energy have both advantages and disadvantages

    International Nuclear Information System (INIS)

    Despite being more expensive, renewable energy sources have profound advantages - they are more environment-friendly and help decrease Europe's dependence on foreign energy producers. As a result, the European Union set a target to cover 20% of its energy demand with renewable sources by 2020. Slovakia's target is 14% with the current proportion being barely 7%. Half of this green energy comes from conventional water power plants. The other half is covered by biomass. Other than that, Slovakia is housing some new facilities producing bio fuels from corn and rapeseed. Other energy sources are more expensive. So far, geothermal springs have been used mostly for recreation. Solar and wind energy have hardly shown any development. Some investments have been announced in biogas heating and electricity production. Renewable energy sources are typically subsidized as early as the construction phase. Up to half of the investment costs can be covered by taxpayers' money. Other incentives include tax exemption or guaranteed higher purchase prices. In this area, last year's change in legislation, guaranteeing energy prices for renewable for the next fifteen years, has been crucial. The disadvantage is that higher prices for renewable energy have to be paid by the consumers. In addition, solar and wind energies are highly volatile - depending on weather conditions. This jeopardizes the stability of the national electricity grid and, if left unregulated, could lead to blackouts. Slovakia registers applications for up to 3,500 MW worth of new renewable energy sources. (authors)

  3. An investigation on piezoelectric energy harvesting for MEMS power sources

    Energy Technology Data Exchange (ETDEWEB)

    Sohn, J.W.; Choi, S.B.; Lee, D.Y. [Inha University, Incheon (Korea). Dept. of Mechanical Engineering

    2005-04-15

    This paper presents the feasibility of using piezoelectric materials in a power source for micro-electro-mechanical systems (MEMS) devices. The finite element method (FEM) is adopted to evaluate the power generations of commercially available piezofilms that are subjected to a fluctuating pressure source (blood pressure). The accuracy of the results obtained from the FEM is verified by comparing with the corresponding results obtained from a theoretical analysis. In addition, an experiment is undertaken in order to evaluate the power generation of two different shapes of the piezofilms: square and circle. Finally, a brief discussion is made on the storage of experimentally harvested power and use of the MEMS applications. (author)

  4. INCOME AND ENERGY SOURCES AMONG AGRARIAN HOUSEHOLDS IN NIGERIA: IMPLICATIONS FOR LOW CARBON ENERGY DEVELOPMENT IN LESS DEVELOPED COUNTRIES

    Directory of Open Access Journals (Sweden)

    M. Mkpado

    2012-07-01

    Full Text Available Low-carbon power comes from sources that produce fewer greenhouse gases than do traditional means of power generation. It includes zero carbon power generation sources, such as wind power, solar power, geothermal power and (except for fuel preparation nuclear power, as well as sources with lower-level emissions such as natural and petroleum gas, and also technologies that prevent carbon dioxide from being emitted into the atmosphere, such as carbon capture and storage. This article correlated value of income from different sources to energy sources used by agrarian households in Nigeria and drew implications for low carbon development in Africa. It analysis included use of wind power for irrigation purposes, harnessing solar energy for lightening and possible cost implications. Secondary data were collected from Community Based Monitoring System Nigeria Project. Descriptive statistics, correlation and qualitative analysis were employed. The average annual income of agrarian households from different sources such as crop farming, livestock farming, petty trading, forest exploitation, remittance and labour per day was below the poverty line of $1 per day. The source of energy that had the highest number of significant correlation was electrical energy (low carbon electrical energy. It showed the possibility of pooling resources as farmers group to attract grants or equity financing to build wind mills for irrigation. The study recommended use of energy efficient bulbs to reduce CO2 emissions. This requires creating awareness among rural dwellers of the need to make such change.

  5. Interferometry imaging for the evolving source in heavy ion collisions at HIRFL-CSR energy

    Institute of Scientific and Technical Information of China (English)

    YIN Hong-Jie; M. J. Efaaf; ZHANG Wei-Ning

    2012-01-01

    Imaging analysis of two-pion interferometry is performed for an evolving particle-emitting source in heavy ion collisions at HIRFL-CSR energy.The source evolution is described by the relativistic hydrodynamics in (2+1) dimensions. The model-independent characteristic quantities of the source are investigated and compared with the interferometry results obtained by the usual Gaussian formula fit.It is found that the firstorder source function moments can describe the source sizes.The ratio of the normalized standard deviation (O) to the first-order moment (R),(O)/(R),is sensitive to the shape of the source function.

  6. Interferometry imaging for the evolving source in heavy ion collisions at HIRFL-CSR energy

    International Nuclear Information System (INIS)

    Imaging analysis of two-pion interferometry is performed for an evolving particle-emitting source in heavy ion collisions at HIRFL-CSR energy. The source evolution is described by the relativistic hydrodynamics in (2+1) dimensions. The model-independent characteristic quantities of the source are investigated and compared with the interferometry results obtained by the usual Gaussian formula fit. It is found that the first- order source function moments can describe the source sizes. The ratio of the normalized standard deviation a to the first-order moment R-tilde, σ-tilde/R-tilde, is sensitive to the shape of the source function. (authors)

  7. Public support for energy sources and related technologies: The impact of simple information provision

    International Nuclear Information System (INIS)

    Increasing public awareness and understanding of alternative energy sources and related technologies is an essential component of informed decision-making regarding new options of generating energy for a low carbon future. The current study examined the influence of psychological factors (i.e., pro-environmental beliefs, and subjective norms) and the provision of factual information on public support for a range of energy sources and related technologies. A representative sample of 1907 Australians completed an on-line survey that measured perceptions of a range of climate change and energy issues. Results showed that support for renewables is stronger than support for traditional fossil-fuel based energy sources (i.e., coal or gas) or nuclear energy. The provision of factual information about generation cost and emissions significantly changed support ratings, particularly when cost information was provided. Regression analyses revealed that pro-environmental beliefs were significantly related to support ratings for alternative energy sources. Subjective norms, however, were the strongest positive explanatory factor, suggesting that social mechanisms may be key drivers of support for new and emerging energy sources and related technologies. - Highlights: • We examine support for a wide range of energy sources and technologies. • Support changes when information on cost and emissions is provided. • Pro-environmental beliefs and social norms positively relate to support

  8. Nuclear fusion - Inexhaustible source of energy for tomorrow

    International Nuclear Information System (INIS)

    The purpose of this paper is to provide a general description of nuclear fusion as an energy option for the future and to clarify to some extent the various issues - scientific, technological, economic and environmental - which are likely to be relevant to controlled thermonuclear fusion. Section 1 describes the world energy problem and some advantages of nuclear fusion compared to other energy options. Sections 2 and 3 describe the fundamentals of fusion energy, plasma confinement, heating and technological aspects of fusion researches. Some plasma confinement schemes (tokamak, stellarator, inertial confinement fusion) are described. The main experimental results and parameter devices are cited to illustrate the state of the art as of 1989. Various engineering problems associated with reactor design, magnetic systems, materials, plasma purity, fueling, blankets, environment, economics and safety are discussed. A description of both bilateral and multilateral efforts in fusion research under the auspices of the IAEA is presented in Section 4. (author). 11 refs, 4 figs, 1 tab

  9. Thorium: An energy source for the world of tomorrow ?

    CERN Document Server

    CERN. Geneva

    2014-01-01

    To meet the tremendous world energy needs, systematic R&D has to be pursued to replace fossil fuels. The ThEC13 conference organized by iThEC at CERN last October has shown that thorium is seriously considered by developing countries as a key element of their energy strategy. Developed countries are also starting to move in the same direction. How thorium could make nuclear energy (based on thorium) acceptable to society will be discussed. Thorium can be used both to produce energy and to destroy nuclear waste. As thorium is not fissile, one elegant option is to use an accelerator, in so-called “Accelerator Driven Systems (ADS)”, as suggested by Carlo Rubbia. CERN’s important contributions to R&D on thorium related issues will be mentioned as well as the main areas where CERN could contribute to this field in the future.

  10. Creating Prospective Value Chains for Renewable Road Transport Energy Sources

    OpenAIRE

    Wessberg, Nina; Leinonen, Anna; Tuominen, Anu; Eerola, Annele; Bolwig, Simon

    2014-01-01

    If the Nordic energy and transport sectors are to meet the 2050 energy and climate policy targets, major systemic chang-es are necessary. The transition requires cooperation between public and private actors. The approach outlined in the paper combines elements from the fields of system level changes (transitions), value chain analysis and forward looking policy design. It presents a novel, policy relevant application with a set of practical tools to support development of im-plementation str...

  11. Renewable Energy Sources in Romania: A Statistical Approach

    OpenAIRE

    Nicoleta CARAGEA; Alexandru, Ciprian Antoniade

    2010-01-01

    Biodiversity is in decline globally and major ecosystems are placed under increasing pressure. Global poverty persists; the Millennium Development Goals would need major efforts to be achieved. This paper will explore the perspective for a new energy sector economy in relation to climate change and the sustainable development objectives. All renewable energy technologies are not appropriate to all applications or locations, however. This paper identifies some of the key environmental and ...

  12. Limitations of Nuclear Power as a Sustainable Energy Source

    Directory of Open Access Journals (Sweden)

    Joshua M. Pearce

    2012-06-01

    Full Text Available This paper provides a review and analysis of the challenges that nuclear power must overcome in order to be considered sustainable. The results make it clear that not only do innovative technical solutions need to be generated for the fundamental inherent environmental burdens of nuclear energy technology, but the nuclear industry must also address difficult issues of equity both in the present and for future generations. The results show that if the concept of just sustainability is applied to the nuclear energy sector a global large-scale sustainable nuclear energy system to replace fossil fuel combustion requires the following: (i a radical improvement in greenhouse gas emissions intensity by improved technology and efficiency through the entire life cycle to prevent energy cannibalism during rapid growth; (ii the elimination of nuclear insecurity to reduce the risks associated with nuclear power so that the free market can indemnify it without substantial public nuclear energy insurance subsidies; (iii the elimination of radioactive waste at the end of life and minimization of environmental impact during mining and operations; and (iv the nuclear industry must regain public trust or face obsolescence as a swarm of renewable energy technologies quickly improve both technical and economic performance.

  13. Covering of heating load of object by using ground heat as a renewable energy source

    Directory of Open Access Journals (Sweden)

    Čenejac Aleksandra R.

    2012-01-01

    Full Text Available Rational use of energy, improving energy performance of buildings and use of renewable energy sources are the most important measures for reducing consumption of non-renewable primary energy (solid, liquid, and gaseous fuels, environmental protection and for the future sustainable development of mankind. In the total primary energy consumption great part is related to building industry, for heating spaces in which people stay and live. Renewable energy sources (RES present natural resources and they are one of the alternatives that allow obtaining heat for heating buildings, and by that they provide a significant contribution to the energy balance of a country. This paper analyzes the participation of ground source as RES, when the vertical (the probe in the ground and horizontal (registry in the ground heat exchangers are used for covering heating load of the building.

  14. Strategic Importance of Energy Sources of Middle East Region for the 21st Century World Economy

    OpenAIRE

    Altay, Hüseyin; Nugay, Ulaş

    2013-01-01

    The importance of energy sources which started to become the most strategic input for the countries in the 20th century gradually increases. De-spite of the increase of demand and dependence to the energy at this ratio, energy resources speedily decrease. This situation caused that all the atten-tions focused on energy regions. Middle East is one of the most important of these regions. Within this framework, this study aims to explain the impor-tance of Middle East energy sources of 21st cent...

  15. Angular and mass resolved energy distribution measurements with a gallium liquid metal ion source

    International Nuclear Information System (INIS)

    Ionisation and energy broadening mechanisms relevant to liquid metal ion sources are discussed. A review of experimental results giving a picture of source operation and a discussion of the emission mechanisms thought to occur for the ionic species and droplets emitted is presented. Further work is suggested by this review and an analysis system for angular and mass resolved energy distribution measurements of liquid metal ion source beams has been constructed. The energy analyser has been calibrated and a series of measurements, both on and off the beam axis, of 69Ga+, Ga++ and Ga2+ ions emitted at various currents from a gallium source has been performed. A comparison is made between these results and published work where possible, and the results are discussed with the aim of determining the emission and energy spread mechanisms operating in the gallium liquid metal ion source. (author)

  16. A Study of the Energy Sources of Herbig-Haro Objects

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    We make a statistical study of the energy sources of high-velocity phenomena, Herbig-Haro (HH) objects. IRAS counterparts of HH objects are identified.Their colors, brightness, geometric relation to the HH objects and SED are analysed. The sources are found to be concentrated in a band-shaped region in the IRAS color-color diagram. We suggest an explanation of thick surrounding material for this distribution. We propose a new method for identifying the energy sources based on color and brightness. This method is applied to more than 200 HH objects whose energy sources are still unknown. Finally, a group of very young stellar object candidates which have similar properties to the HH energy sources is picked out.Their large-scale distribution is discussed.

  17. Influence of some factors on alpha energy spectrum of 241Am fire alarm source

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    Several primary factors influencing the alpha energy spectrum of 241Am fire alarm source have been studied in order to get betteralpha energy spectrum.The results show that the homogeneity andthe thickness of metal surface coat and the size of active area of thesource have considerable influence on the alpha energy spectrum of thesource.

  18. A strategy to unveil transient sources of ultra-high-energy cosmic rays

    Directory of Open Access Journals (Sweden)

    Takami Hajime

    2013-06-01

    Full Text Available Transient generation of ultra-high-energy cosmic rays (UHECRs has been motivated from promising candidates of UHECR sources such as gamma-ray bursts, flares of active galactic nuclei, and newly born neutron stars and magnetars. Here we propose a strategy to unveil transient sources of UHECRs from UHECR experiments. We demonstrate that the rate of UHECR bursts and/or flares is related to the apparent number density of UHECR sources, which is the number density estimated on the assumption of steady sources, and the time-profile spread of the bursts produced by cosmic magnetic fields. The apparent number density strongly depends on UHECR energies under a given rate of the bursts, which becomes observational evidence of transient sources. It is saturated at the number density of host galaxies of UHECR sources. We also derive constraints on the UHECR burst rate and/or energy budget of UHECRs per source as a function of the apparent source number density by using models of cosmic magnetic fields. In order to obtain a precise constraint of the UHECR burst rate, high event statistics above ∼ 1020 eV for evaluating the apparent source number density at the highest energies and better knowledge on cosmic magnetic fields by future observations and/or simulations to better estimate the time-profile spread of UHECR bursts are required. The estimated rate allows us to constrain transient UHECR sources by being compared with the occurrence rates of known energetic transient phenomena.

  19. Answers to energy crisis: energy efficiency, rational use of energy and renewable sources; Respostas para crise de energia eletrica: eficiencia energetica, uso racional de energia e fontes renovaveis

    Energy Technology Data Exchange (ETDEWEB)

    Naturesa, Jim Silva; Mariotoni, Carlos Alberto [Universidade Estadual de Campinas (FEC/UNICAMP), SP (Brazil). Fac. de Engenharia Civil, Arquitetura e Urbanismo; Menezes, Taciana de V.; Perrone, Fernando Pinto Dias; Lepetitgaland, Karla Kwiatkowski [Centrais Eletricas Brasileiras S.A (ELETROBRAS), Rio de Janeiro, RJ (Brazil)

    2008-07-01

    This article presents the main advances in energy efficiency of Brazil, the results of the electrical energy alternatives sources incentive program until May of 2007, and examples of using energy in a reasonable way. In our point of view, these three initiatives are essentials in any energetic planning and must be considered with seriousness, mainly at moments of energy crisis. (author)

  20. The share of renewable energy in the EU. Country Profiles. Overview of Renewable Energy Sources in the Enlarged European Union

    International Nuclear Information System (INIS)

    The promotion of renewable energy has an important role to play in addressing the growing dependence on energy imports in Europe and in tackling climate change. Since 1997, the Union has been working towards the ambitious target of a 12% share of renewable energy in gross inland consumption by 2010. In 1997, the share of renewable energy was 5.4%; by 2001 it had reached 6%. This Staff Working Document gives an overview of the different situations of renewable energy sources in the European Union. It includes part of the formal report that the Commission is required to make under Article 3 of Directive 2001/77/EC on electricity from renewable energy sources, and it completes the overall picture with information at a country level on the heat produced from renewable energies and biofuels in the transport sector. This Staff Working Document complements the Communication on 'The share of Renewable Energy sources in the EU'. Data is based on different sources. Firstly, on the reports from Member States on national progress in achieving the targets on electricity from renewable energy sources. Secondly, on a study launched by the Commission on the evolution of renewable energy sources. And thirdly, on a variety of sources like the European Barometer of renewable energies, data from the industry, etc. With the enlargement of the European Union, the new Member States are required to adopt the RES-E Directive (renewable energy sources for electricity) by 1 May 2004. In the accession treaty, national indicative targets are set and the overall renewable electricity target for the enlarged Union will therefore be 21% of gross electricity consumption by 2010. The Commission has the legal obligation to report on the degree of achievement of new Member States' targets by 2006. Although it is too early to assess RES-policy in the new Member States due to very recently adopted regulations, this document also includes national information on the States now joining the European Union

  1. The role of local renewable energy sources in regional energy production: The case of South-East Finland

    Directory of Open Access Journals (Sweden)

    M. Laihanen, A. Karhunen, T. Ranta

    2016-01-01

    Full Text Available The focus of the paper was on discussing the challenges and possibilities of promoting and utilising various renewable energy sources at the regional level. National obligations and the rising prices of fossil fuels have put pressure on energy producers and end users to start utilising renewable energy sources. South-East Finland has one of Europe’s highest forest industry concentrations, and renewable energy sources such as wood fuels are utilised widely. The study utilises earlier regional studies and statistics as well as new results from this study. These results are combined into regional potentials which are presented by regional energy balance. The analyses provide important background information for decision making. The various regions of Finland have different operational environments and local participants need motivation and activation regarding these local possibilities.

  2. Lowering IceCube's Energy Threshold for Point Source Searches in the Southern Sky

    CERN Document Server

    Aartsen, M G; Ackermann, M; Adams, J; Aguilar, J A; Ahlers, M; Ahrens, M; Altmann, D; Andeen, K; Anderson, T; Ansseau, I; Anton, G; Archinger, M; Arguelles, C; Arlen, T C; Auffenberg, J; Axani, S; Bai, X; Barwick, S W; Baum, V; Bay, R; Beatty, J J; Tjus, J Becker; Becker, K -H; BenZvi, S; Berghaus, P; Berley, D; Bernardini, E; Bernhard, A; Besson, D Z; Binder, G; Bindig, D; Bissok, M; Blaufuss, E; Blot, S; Boersma, D J; Bohm, C; Börner, M; Bos, F; Bose, D; Böser, S; Botner, O; Braun, J; Brayeur, L; Bretz, H -P; Burgman, A; Buzinsky, N; Casey, J; Casier, M; Cheung, E; Chirkin, D; Christov, A; Clark, K; Classen, L; Coenders, S; Collin, G H; Conrad, J M; Cowen, D F; Silva, A H Cruz; Daughhetee, J; Davis, J C; Day, M; de André, J P A M; De Clercq, C; Rosendo, E del Pino; Dembinski, H; De Ridder, S; Desiati, P; de Vries, K D; de Wasseige, G; de With, M; DeYoung, T; Díaz-Vélez, J C; di Lorenzo, V; Dujmovic, H; Dumm, J P; Dunkman, M; Eberhardt, B; Ehrhardt, T; Eichmann, B; Euler, S; Evenson, P A; Fahey, S; Fazely, A R; Feintzeig, J; Felde, J; Filimonov, K; Finley, C; Flis, S; Fösig, C -C; Fuchs, T; Gaisser, T K; Gaior, R; Gallagher, J; Gerhardt, L; Ghorbani, K; Gladstone, L; Glagla, M; Glüsenkamp, T; Goldschmidt, A; Golup, G; Gonzalez, J G; Góra, D; Grant, D; Griffith, Z; Ha, C; Haack, C; Ismail, A Haj; Hallgren, A; Halzen, F; Hansen, E; Hansmann, B; Hansmann, T; Hanson, K; Hebecker, D; Heereman, D; Helbing, K; Hellauer, R; Hickford, S; Hignight, J; Hill, G C; Hoffman, K D; Hoffmann, R; Holzapfel, K; Homeier, A; Hoshina, K; Huang, F; Huber, M; Huelsnitz, W; Hultqvist, K; In, S; Ishihara, A; Jacobi, E; Japaridze, G S; Jeong, M; Jero, K; Jones, B J P; Jurkovic, M; Kappes, A; Karg, T; Karle, A; Katz, U; Kauer, M; Keivani, A; Kelley, J L; Kemp, J; Kheirandish, A; Kim, M; Kintscher, T; Kiryluk, J; Klein, S R; Kohnen, G; Koirala, R; Kolanoski, H; Konietz, R; Köpke, L; Kopper, C; Kopper, S; Koskinen, D J; Kowalski, M; Krings, K; Kroll, M; Krückl, G; Krüger, C; Kunnen, J; Kunwar, S; Kurahashi, N; Kuwabara, T; Labare, M; Lanfranchi, J L; Larson, M J; Lennarz, D; Lesiak-Bzdak, M; Leuermann, M; Leuner, J; Lu, L; Lünemann, J; Madsen, J; Maggi, G; Mahn, K B M; Mancina, S; Mandelartz, M; Maruyama, R; Mase, K; Matis, H S; Maunu, R; McNally, F; Meagher, K; Medici, M; Meier, M; Meli, A; Menne, T; Merino, G; Meures, T; Miarecki, S; Middell, E; Mohrmann, L; Montaruli, T; Moulai, M; Nahnhauer, R; Naumann, U; Neer, G; Niederhausen, H; Nowicki, S C; Nygren, D R; Pollmann, A Obertacke; Olivas, A; Omairat, A; O'Murchadha, A; Palczewski, T; Pandya, H; Pankova, D V; Penek, Ö; Pepper, J A; Heros, C Pérez de los; Pfendner, C; Pieloth, D; Pinat, E; Posselt, J; Price, P B; Przybylski, G T; Quinnan, M; Raab, C; Rädel, L; Rameez, M; Rawlins, K; Reimann, R; Relich, M; Resconi, E; Rhode, W; Richman, M; Riedel, B; Robertson, S; Rongen, M; Rott, C; Ruhe, T; Ryckbosch, D; Rysewyk, D; Sabbatini, L; Sandrock, A; Sandroos, J; Sarkar, S; Satalecka, K; Schimp, M; Schlunder, P; Schmidt, T; Schoenen, S; Schöneberg, S; Schönwald, A; Schumacher, L; Seckel, D; Seunarine, S; Soldin, D; Song, M; Spiczak, G M; Spiering, C; Stahlberg, M; Stamatikos, M; Stanev, T; Stasik, A; Steuer, A; Stezelberger, T; Stokstad, R G; Stößl, A; Ström, R; Strotjohann, N L; Sullivan, G W; Sutherland, M; Taavola, H; Taboada, I; Tatar, J; Ter-Antonyan, S; Terliuk, A; Tešić, G; Tilav, S; Toale, P A; Tobin, M N; Toscano, S; Tosi, D; Tselengidou, M; Turcati, A; Unger, E; Usner, M; Vallecorsa, S; Vandenbroucke, J; van Eijndhoven, N; Vanheule, S; van Rossem, M; van Santen, J; Veenkamp, J; Vehring, M; Voge, M; Vraeghe, M; Walck, C; Wallace, A; Wallraff, M; Wandkowsky, N; Weaver, Ch; Wendt, C; Westerhoff, S; Whelan, B J; Wickmann, S; Wiebe, K; Wiebusch, C H; Wille, L; Williams, D R; Wills, L; Wissing, H; Wolf, M; Wood, T R; Woschnagg, K; Xu, D L; Xu, X W; Xu, Y; Yanez, J P; Yodh, G; Yoshida, S; Zoll, M

    2016-01-01

    Observation of a point source of astrophysical neutrinos would be a "smoking gun" signature of a cosmic-ray accelerator. While IceCube has recently discovered a diffuse flux of astrophysical neutrinos, no localized point source has been observed. Previous IceCube searches for point sources in the southern sky were restricted by either an energy threshold above a few hundred TeV or poor neutrino angular resolution. Here we present a search for southern sky point sources with greatly improved sensitivities to neutrinos with energies below 100 TeV. By selecting charged-current $\

  3. RF broad-beam low-energy ion source with electron compensation

    Directory of Open Access Journals (Sweden)

    Zykov A. V.

    2010-03-01

    Full Text Available Characteristics of single-grid RF ion source with 250 mm beam diameter and 1A beam current have been studied. Energy distribution functions of electrons and ions emitted by the source have been measured. It is shown that the emitted electron current is sufficient for full ion beam current compensation. The technique of ion to electron current ratio control allowing to change this ratio in wide range is proposed. Using the ICP in the source allows to rich high current density in the low ion energy range with the possibility of independent control of ion energy and current density.

  4. Fuel-efficiency of hydrogen and heat storage technologies for integration of fluctuating renewable energy sources

    DEFF Research Database (Denmark)

    Mathiesen, Brian Vad; Lund, Henrik

    2005-01-01

    sources as well as power plants and CHP (Combined heat and power production). Emphasis is put on the need for ancillary services. Devices to store electricity as well as devices to store heat can be used to help the integration of fluctuating sources. Electricity storage technologies can be used......This paper presents the methodology and results of analysing the use of different energy storage technologies in the task of integration of fluctuating renewable energy sources (RES) into the electricity supply. The analysis is done on the complete electricity system including renewable energy...

  5. Ultraviolet energy dependence of particle production sources in relativistic heavy-ion collisions

    CERN Document Server

    Wolschin, Georg

    2015-01-01

    The energy dependence of particle production sources in relativistic heavy-ion collisions is investigated from RHIC to LHC energies. Whereas charged-hadron production in the fragmentation sources follows a ln(s_NN/s_0) law, particle production in the mid-rapidity gluon-gluon source exhibits a much stronger dependence proportional to ln^3(s_NN/s_0), and becomes dominant between RHIC and LHC energies. The production of particles with pseudorapidities beyond the beam rapidity is also discussed.

  6. Link between intermittent electrical energy sources and district heating sector

    DEFF Research Database (Denmark)

    Dominkovic, Dominik Franjo

    2016-01-01

    Energy has always been one of the key challenges in planning of societies' development worldwide. The COP conference in Paris in December 2015 has shown unprecedented mutual understanding of harmful consequences climate change can cause. Integrating power and heating sectors in an efficient way...

  7. Noninvasive deep brain stimulation using focused energy sources

    NARCIS (Netherlands)

    Sierra, C. V. Rizzo

    2010-01-01

    A non-invasive methodological possibility for brain stimulation through the simultaneous use of an external energy beam and an existing brain imaging system such as functional magnetic resonance imaging (fMRI) is herein proposed; the main advantage is to confine the stimulation into a single brain a

  8. Polyphosphate - an ancient energy source and active metabolic regulator

    Directory of Open Access Journals (Sweden)

    Achbergerová Lucia

    2011-08-01

    Full Text Available Abstract There are a several molecules on Earth that effectively store energy within their covalent bonds, and one of these energy-rich molecules is polyphosphate. In microbial cells, polyphosphate granules are synthesised for both energy and phosphate storage and are degraded to produce nucleotide triphosphate or phosphate. Energy released from these energetic carriers is used by the cell for production of all vital molecules such as amino acids, nucleobases, sugars and lipids. Polyphosphate chains directly regulate some processes in the cell and are used as phosphate donors in gene regulation. These two processes, energetic metabolism and regulation, are orchestrated by polyphosphate kinases. Polyphosphate kinases (PPKs can currently be categorized into three groups (PPK1, PPK2 and PPK3 according their functionality; they can also be divided into three groups according their homology (EcPPK1, PaPPK2 and ScVTC. This review discusses historical information, similarities and differences, biochemical characteristics, roles in stress response regulation and possible applications in the biotechnology industry of these enzymes. At the end of the review, a hypothesis is discussed in view of synthetic biology applications that states polyphosphate and calcium-rich organelles have endosymbiotic origins from ancient protocells that metabolized polyphosphate.

  9. Photovoltaics as a terrestrial energy source. Volume 3: An overview

    Science.gov (United States)

    Smith, J. L.

    1980-01-01

    Photovoltaic (PV) systems were evaluated in terms of their potential for terrestrial application A comprehensive overview of important issues which bear on photovoltaic (PV) systems development is presented. Studies of PV system costs, the societal implications of PV system development, and strategies in PV research and development in relationship to current energy policies are summarized.

  10. Comparison Of Energy Sources Grown On Agricultural Land

    Directory of Open Access Journals (Sweden)

    Jureková Zuzana

    2015-11-01

    Full Text Available The aim of the paper is to compare biomass production of energy plants and selected crops grown on arable land in the south-western Slovakia in 2007–2014, its energy value and the influence of decisive climatic factors on the size of the production. The data on yields of dominant crops grown in the agricultural farm were obtained from the statistical data of the farm. Aboveground biomass of willows and poplars was harvested at the end of the harvest cycle. Aboveground biomass of Miscanthus sinensis was harvested in 2010–2014, always in early spring period of the following year. Winter wheat, spring barley and maize grown for silage during the period 2007–2014 provided the lowest yields in 2010 and the highest in 2011 and 2014. The highest energy value was obtained from maize in 2014 (400.66 GJ ha−1. The short rotation coppice poplars of Italian provenance yielded biomass with energy value of 951.68 GJ ha−1 year−1 at the end of the first three-year harvest cycle in 2012. The analysis of variance confirmed that there are highly significant statistical differences in the poplar biomass yield among the varieties and individual experimental years. The fast growing willows of Swedish provenance provided aboveground biomass energy value of 868.88 GJ ha−1 year−1 at the end of the first four-year harvest cycle in 2011. The biomass production of the perennial grass Miscanthus sinensis, depending on the growing period, can be expressed by a polynomial trend function. The highest biomass production was obtained in the third growing period (2012. At the end of the fifth growing period (2014, the yield amounted to 28.60 t ha−1 of the dry aboveground biomass. The energy value of the aboveground biomass of Miscanthus reached 486.20 GJ ha−1 in 2014. Differences in the biomass yield of the Miscanthus genotypes are statistically highly significant in each of the monitored growing periods. The growth and production process of the selected energy

  11. An Analysis of the Development of Renewable Energy Sources in the Western Minority Areas

    Institute of Scientific and Technical Information of China (English)

    Deng Yanfei; Liu Mingyang

    2016-01-01

    The biggest challenge for China’s energy is sustainability of the environment. Espe-cially in recent years, global warming, frequent natural disasters, and the serious reduction of the natural resources and energy are gravely affecting normal production and mankind’s existence. Burn-ing large amounts of fossil fuel produces green-house gases and polluted soot. The development and utilization of renewable energy is extremely ur-gent. In other words, renewable energy sources must grow briskly. Under the guidance of the na-tional policy of the“13 th Five Year Plan”, the de-velopment and utilization of renewable energy sources in the Western Minority Areas must be strengthened based on local conditions, by paying attention to relevant personnel training, and en-couraging innovation and entrepreneurship so that the development of local renewable energy sources can reach a new level.

  12. Contribution from individual nearby sources to the spectrum of high-energy cosmic-ray electrons

    Energy Technology Data Exchange (ETDEWEB)

    Sedrati, R., E-mail: rafik.sedrati@univ-annaba.org; Attallah, R.

    2014-04-01

    In the last few years, very important data on high-energy cosmic-ray electrons and positrons from high-precision space-born and ground-based experiments have attracted a great deal of interest. These particles represent a unique probe for studying local comic-ray accelerators because they lose energy very rapidly. These energy losses reduce the lifetime so drastically that high-energy cosmic-ray electrons can attain the Earth only from rather local astrophysical sources. This work aims at calculating, by means of Monte Carlo simulation, the contribution from some known nearby astrophysical sources to the cosmic-ray electron/positron spectra at high energy (≥10GeV). The background to the electron energy spectrum from distant sources is determined with the help of the GALPROP code. The obtained numerical results are compared with a set of experimental data.

  13. CONSTRAINTS ON THE SOURCE OF ULTRA-HIGH-ENERGY COSMIC RAYS USING ANISOTROPY VERSUS CHEMICAL COMPOSITION

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Ruo-Yu; Wang, Xiang-Yu [School of Astronomy and Space Science, Nanjing University, Nanjing 210093 (China); Taylor, Andrew M. [Dublin Institute for Advanced Studies, 31 Fitzwilliam Place, Dublin 2 (Ireland); Lemoine, Martin [Institut d' Astrophysique de Paris, CNRS, UPMC, 98 bis Boulevard Arago, F-75014 Paris (France); Waxman, Eli, E-mail: lemoine@iap.fr [Physics Faculty, Weizmann Institute, P.O. Box 26, Rehovot 7600 (Israel)

    2013-10-20

    The joint analysis of anisotropy signals and chemical composition of ultra-high-energy cosmic rays offers strong potential for shedding light on the sources of these particles. Following up on an earlier idea, this paper studies the anisotropies produced by protons of energy >E/Z, assuming that anisotropies at energy >E have been produced by nuclei of charge Z, which share the same magnetic rigidity. We calculate the number of secondary protons produced through photodisintegration of the primary heavy nuclei. Making the extreme assumption that the source does not inject any proton, we find that the source(s) responsible for anisotropies such as reported by the Pierre Auger Observatory should lie closer than ∼20-30, 80-100, and 180-200 Mpc if the anisotropy signal is mainly composed of oxygen, silicon, and iron nuclei, respectively. A violation of this constraint would otherwise result in the secondary protons forming a more significant anisotropy signal at lower energies. Even if the source were located closer than this distance, it would require an extraordinary metallicity ∼> 120, 1600, and 1100 times solar metallicity in the acceleration zone of the source, for oxygen, silicon, and iron, respectively, to ensure that the concomitantly injected protons do not produce a more significant low-energy anisotropy. This offers interesting prospects for constraining the nature and the source of ultra-high-energy cosmic rays with the increase in statistics expected from next-generation detectors.

  14. High-Brightness Beams from a Light Source Injector The Advanced Photon Source Low-Energy Undulator Test Line Linac

    CERN Document Server

    Travish, G; Borland, M; Hahne, M; Harkay, K C; Lewellen, J W; Lumpkin, Alex H; Milton, S V; Sereno, N S

    2000-01-01

    The use of existing linacs, and in particular light source injectors, for free-electron laser (FEL) experiments is becoming more common due to the desire to test FELs at ever shorter wavelengths. The high-brightness, high-current beams required by high-gain FELs impose technical specifications that most existing linacs were not designed to meet. Moreover, the need for specialized diagnostics, especially shot-to-shot data acquisition, demands substantial modification and upgrade of conventional linacs. Improvements have been made to the Advanced Photon Source (APS) injector linac in order to produce and characterize high-brightness beams. Specifically, effort has been directed at generating beams suitable for use in the low-energy undulator test line (LEUTL) FEL in support of fourth-generation light source research. The enhancements to the linac technical and diagnostic capabilities that allowed for self-amplified spontaneous emission (SASE) operation of the FEL at 530 nm are described. Recent results, includi...

  15. Photovoltaics as a terrestrial energy source. Volume 1: An introduction

    Science.gov (United States)

    Smith, J. L.

    1980-01-01

    Photovoltaic (PV) systems were examined their potential for terrestrial application and future development. Photovoltaic technology, existing and potential photovoltaic applications, and the National Photovoltaics Program are reviewed. The competitive environment for this electrical source, affected by the presence or absence of utility supplied power is evaluated in term of systems prices. The roles of technological breakthroughs, directed research and technology development, learning curves, and commercial demonstrations in the National Program are discussed. The potential for photovoltaics to displace oil consumption is examined, as are the potential benefits of employing PV in either central-station or non-utility owned, small, distributed systems.

  16. On the energy source of a magnetically driven shock tube

    DEFF Research Database (Denmark)

    Chang, C.T.; Kofoed-Hansen, O.

    1968-01-01

    In order to study the effect of the variation in load due to the motion of the current sheet on the driving current of a magnetically driven shock tube, we first demonstrate that the usual `snow-plough' model is adequate for the purpose. On the basis of this model it is shown theoretically...... that a shock moving at a constant speed can be obtained by using a constant voltage source. The result of the analysis shows that the value of the steady-state current Î depends on a single parameter epsilon related to the voltage and resistance of the battery, the geometry of the electrodes and the initial...

  17. On the comparison of energy sources: feasibility of radio frequency and ambient light harvesting

    CERN Document Server

    Korotkevich, Alexander O; Lavrova, Olga; Coutsias, Evangelos

    2015-01-01

    With growing interest in multi source energy harvesting including integrated microchips we propose a comparison of radio frequency (RF) and solar energy sources in a typical city. Harvesting devices for RF and solar energy will be competing for space of a compact micro or nano device as well as for orientation with respect to the energy source. This is why it is important to investigate importance of every source of energy and make a decision whether it will be worthwhile to include such harvesters. We considered theoretically possible irradiance by RF signal in different situations, typical for the modern urban environment and compared it with ambient solar energy sources available through the night, including moon light. Our estimations show that solar light energy dominates by far margin practically all the time, even during the night, if there is a full moon in the absence of clouds. At the same time, in the closed compartments or at the new moon RF harvesting can be beneficial as a source of "free" energ...

  18. SUSTAINABLE TOURISM AND HOTEL MANAGEMENT IN MACEDONIA THROUGH THE USE OF RENEWABLE ENERGY SOURCES

    OpenAIRE

    Biljana Petrevska; Vlatko Cingoski; Mimoza Serafimova

    2016-01-01

    This study aimed to investigate the nature of energy applied in hotel industry in Macedonia. It explored the indicators for resources application in three, four and five star hotels. The data were collected by means of an online survey conducted among 45 managers and department supervisors. It is found that large number of hotels lack measures to reduce the conventional energy use and replace it with renewable sources of energy. Considering the fact that energy use is a substantia...

  19. Effect of dry period length and dietary energy source on energy balance, milk yield, and milk composition of dairy cows

    NARCIS (Netherlands)

    Knegsel, van A.T.M.; Remmelink, G.J.; Jorjong, S.; Fievez, V.; Kemp, B.

    2014-01-01

    The objective of this study was to evaluate the effects of dry period length and dietary energy source in early lactation on milk production, feed intake, and energy balance (EB) of dairy cows. Holstein-Friesian dairy cows (60 primiparous and 108 multiparous) were randomly assigned to dry period len

  20. Effects of dietary energy source on energy balance, metabolites and reproduction variables in dairy cows in early lactation

    NARCIS (Netherlands)

    Knegsel, van A.T.M.; Brand, van den H.; Dijkstra, J.; Kemp, B.

    2007-01-01

    This paper summarizes three recent studies by the same authors with the objective to study the effect of dietary energy source on the energy balance (EB) and risk for metabolic and reproductive disorders in dairy cows in early lactation. The first study, a literature survey, illustrated that feeding

  1. LEETECH facility as a flexible source of low energy electrons

    CERN Document Server

    Attie, D; Bezshyyko, O; Burmistrov, L; Chaus, A; Colas, P; Fedorchuk, O; Golinka-Bezshyyko, L; Kadenko, I; Krylov, V; Kubytskyi, V; Lopez, R; Monard, H; Rodin, V; Titov, M; Tomassini, D; Variola, A

    2016-01-01

    A new versatile facility LEETECH for detector R&D, tests and calibration is designed and constructed. It uses electrons produced by the photoinjector PHIL at LAL, Orsay and provides a powerful tool for wide range R&D studies of different detector concepts delivering "mono-chromatic" samples of low energy electrons with adjustable energy and intensity. Among other innovative instrumentation techniques, LEETECH will be used for testing various gaseous tracking detectors and studying new Micromegas/InGrid concept which has very promising characteristics of spatial resolution and can be a good candidate for particle tracking and identification. In this paper the importance and expected characteristics of such facility based on detailed simulation studies are addressed.

  2. Electrical energy sources for organic synthesis on the early earth

    Science.gov (United States)

    Chyba, Christopher; Sagan, Carl

    1991-01-01

    It is pointed out that much of the contemporary origin-of-life research uses the original estimates of Miller and Urey (1959) for terrestrial energy dissipation by lightning and coronal discharges being equal to 2 x 10 to the 19th J/yr and 6 x 10 to the 19th J/yr, respectively. However, data from experiments that provide analogues to naturally-occurring lightning and coronal discharges indicate that lightning energy yields for organic synthesis (nmole/J) are about one order of magnitude higher than the coronal discharge yields. This suggests that, on early earth, organic production by lightning may have dominated that due to coronal emission. New values are recommended for lightning and coronal discharge dissipation rates on the early earth, 1 x 10 to the 18th J/yr and 5 x 10 to the 17th J/yr, respectively.

  3. Sireme: the renewable heat fund, engine of renewable energy sources

    International Nuclear Information System (INIS)

    For its first issue, the international exhibition of renewable energies (Sireme) gathered 15000 visitors in Paris in mid-November. The program of conferences has permitted to take stock of the progresses made since the publication of the texts following the 'Grenelle de l'Environnement' multi-parties debate. The announcement of the national plan of renewable energies development by J.L. Borloo, French Minister of ecology, has been the starting point of these meetings. The most outstanding news of this plan concerns the creation of a renewable heat fund for a revival of district heating networks and the increase of photovoltaic conversion by a factor of 400 (6400 MW) by the year 2020. (J.S.)

  4. Nine Level Inverter with Boost Converter from Renewable Energy Source

    Directory of Open Access Journals (Sweden)

    Maruthu Pandiyan.R

    2015-01-01

    Full Text Available A new single phase nine level multilevel inverter is proposed. The input to the proposed nine level multilevel inverter is obtained from solar panel . The solar energy obtained from the solar panel is not constant and it varies with times. In order to maintain the constant voltage obtained from the solar panel the boost converter is used to maintain the constant output voltage using MPPT ( Perturb and observe algorithm algorithm. Then the buck boost converter output voltage is stored in the battery bank. Finally the battery energy is connected to the 9 level inverter circuits. The harmonics in the inverter is eliminated by using the fuzzy logic controller. The gate pulse for the multilevel inverter is given by the fuzzy logic controller which in turn reduces the harmonics in the inverter. Then the inverter output is connected to the grid are some application.

  5. Energy consevation: increased health impacts despite source reduction

    International Nuclear Information System (INIS)

    Efforts to reduce the energy needs to heat or cool dwellings have the potential to create new health hazards. Increases in indoor levels of radon and its progeny from the reduction in air exchange rates add a substantial radioactive burden to the general population. Other indoor pollutants reaching critical concentrations in homes with low air exchange rates are CO and NO2 from unvented combustion in gas stoves and heaters, tobacco smoke and asbestos fibers. In addition, insulation materials may contribute new toxicants like formaldehyde diffusing from foam injected into walls. Risk estimations using linear dose-response relationships show risk factors per kWh saved which are orders of magnitude higher than for energy production using coal, oil, gas or uranium

  6. Methane hydrates in marine sediments - Untapped source of energy

    Digital Repository Service at National Institute of Oceanography (India)

    Jauhari, P.

    in oil and gas pipelines for clogging the lines, methane hydrates are now looked upon as a promising alternate resource of energy. Natural gas is expected to play an important role in power generation and vehicular transportation because... of the industry in 1930s when it was realised that the long distance oil and gas transmission pipelines in the USA were being clogged by the formation of gas hydrates within the pipelines. To overcome this problem, researches were done on the composition...

  7. Fuel Cells for Balancing Fluctuation Renewable Energy Sources

    OpenAIRE

    Mathiesen, Brian Vad

    2007-01-01

    In the perspective of using fuel cells for integration of fluctuating renewable energy the SOFCs are the most promising. These cells have the advantage of significantly higher electricity efficiency than competing technologies and fuel flexibility. Fuel cells in general also have the advantage of fast regulation abilities combined with excellent part-load efficiencies. Additionally scaling the cells from W to kW to MW is possible and does not influence the efficiencies of the cells. The feasi...

  8. Thermochemical characterization of banana leaves as a potential energy source

    International Nuclear Information System (INIS)

    Highlights: • The chemical composition of semi-dried banana leaves are similar to the other biomass. • The semi-dried leaves present high release of energy under inert and oxidant atmosphere. • The energy released on pyrolysis and combustion can be used to dry the wet banana leaves. • The thermochemical conversion processes can reduce the waste volume significantly. • The banana leaves have potential to use as biomass through combustion and pyrolysis process. - Abstract: Wet and semi-dried banana leaves were characterized through elemental and proximate analyses, lignocellulosic fraction and thermogravimetric analysis (TG/DTG), differential scanning calorimetry (DSC) and high heating value analysis to assess their use as biomass in generating energy through combustion; they were also assessed to determine the potential of obtaining value-added products through pyrolysis. The wet banana leaves had high moisture content of 74.7%. The semi-dried samples exhibited 8.3% moisture, 78.8% volatile solids, 43.5% carbon and a higher heating value of 19.8 MJ/kg. The nitrogen and sulfur contents in the banana leaves were very low. The semi-dried and wet leaves had hemicellulose and lignin contents close to other biomass fuels, and the semi-dried leaves had the lowest cellulose content, of 26.7%. The wet and semi-dried samples showed the same thermal events in oxidizing and inert atmospheres, but with distinctly different mass loss and energy release intensities. The chemical characteristics and the thermal behavior demonstrated by the semi-dried samples indicate their potential for use as biomass, with results similar to other agro-industrial wastes currently used

  9. Rural population and renewable energy sources: Experiences of the Republic of Serbia

    Directory of Open Access Journals (Sweden)

    Pucar Mila

    2006-01-01

    Full Text Available During the last decade of the twentieth century the use of green (renewable energy has become the imperative not only in developed countries worldwide, but also in poorer countries like Asia and Africa. The change from traditional to renewable energy sources carries valuable improvements in environmental protection and economic efficacy. This paper through individual examples, explores the possibility of replacing traditional with renewable energy sources such as solar, wind, geothermal, energy of small hydroelectric power plants, etc. worldwide and in rural Serbian communities.

  10. Microalgae as a sustainable energy source for biodiesel production: A review

    Energy Technology Data Exchange (ETDEWEB)

    Ahmad, A.L.; Yasin, N.H. Mat; Derek, C.J.C.; Lim, J.K. [School of Chemical Engineering, Engineering Campus, Universiti Sains Malaysia, Seri Ampangan, 14300 Nibong Tebal, Seberang Perai Selatan, Pulau Pinang (Malaysia)

    2011-01-15

    Of the three generations of biodiesel feedstocks described in this paper, food crops, non-food crops and microalgae-derived biodiesel, it was found that the third generation, microalgae, is the only source that can be sustainably developed in the future. Microalgae can be converted directly into energy, such as biodiesel, and therefore appear to be a promising source of renewable energy. This paper presents a comparison between the use of microalgae and palm oil as biodiesel feedstocks. It was found that microalgae are the more sustainable source of biodiesel in terms of food security and environmental impact compared to palm oil. The inefficiency and unsustainability of the use of food crops as a biodiesel source have increased interest in the development of microalgae species to be used as a renewable energy source. In this paper, the main advantages of using microalgae for biodiesel production are described in comparison with other available feedstocks, primarily palm oil. (author)

  11. Misconceptions and biases in German students' perception of multiple energy sources: implications for science education

    Science.gov (United States)

    Lee, Roh Pin

    2016-04-01

    Misconceptions and biases in energy perception could influence people's support for developments integral to the success of restructuring a nation's energy system. Science education, in equipping young adults with the cognitive skills and knowledge necessary to navigate in the confusing energy environment, could play a key role in paving the way for informed decision-making. This study examined German students' knowledge of the contribution of diverse energy sources to their nation's energy mix as well as their affective energy responses so as to identify implications for science education. Specifically, the study investigated whether and to what extent students hold mistaken beliefs about the role of multiple energy sources in their nation's energy mix, and assessed how misconceptions could act as self-generated reference points to underpin support/resistance of proposed developments. An in-depth analysis of spontaneous affective associations with five key energy sources also enabled the identification of underlying concerns driving people's energy responses and facilitated an examination of how affective perception, in acting as a heuristic, could lead to biases in energy judgment and decision-making. Finally, subgroup analysis differentiated by education and gender supported insights into a 'two culture' effect on energy perception and the challenge it poses to science education.

  12. Financial mechanisms for renewable energy sources; Mecanismos financeiros para fontes de energia renovaveis

    Energy Technology Data Exchange (ETDEWEB)

    Moya Chaves, Francisco David [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)

    2006-07-01

    This work presents three different financial mechanisms in the world as choices in the electricity generation investment from alternative energy sources. It shows a description of the following methods developed in the world: payment capacity, social costs of energy, and markets that trade renewable energies certificates. Finally, a recommendation about the best choice that could be implemented in Brazil is suggested. Given the importance in the use of the renewable energy of electric energy generation, most of the electric systems in the world have developed mechanisms to encourage the use of alternative energies. With the capacity payment the power plants that employ alternative sources, can receive extra payment as benefits for their initial investment. A possibility could be fixing taxes for the generation of electricity with fossil fuel that could finance the renewable energy sources. A renewable energy market dealing with trade able certificates, forces the electricity purchasers to have a percentage from alternative energies of the totally energy acquired. In this way the forced purchasing of energy from power plants which use energy certificates allows the expansion of these technologies. (author)

  13. S&T advisors call for development of petroleum supplements and alternative energy sources in China

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    @@ Under the auspices of the Academic Divisions of CAS (CASAD), a panel of experts recently completed a consultative project on the medium- and long-term development strategy for petroleum supplements and alternative energy sources in China.

  14. Guide to funding sources for renewable energy in schools and colleges

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    This guide has been designed specifically to identify sources of funding for renewable energy projects in schools, such as a wind generator or a solar water heating system. It is intended for teachers or Friends of associations. (author)

  15. Geothermal energy sources as opportunity for Turkish greenhouse horticulture and the Dutch commercial sector

    NARCIS (Netherlands)

    Zwart, de H.F.; Ruijs, M.N.A.

    2009-01-01

    The objective of this report is to identify the opportunities offered by exploration of geothermal energy sources, and to specify actions to be taken by Dutch governmental bodies and private companies in collaboration with Turkish partners.

  16. Unified System-Level Modeling of Intermittent Renewable Energy Sources and Energy Storage for Power System Operation

    OpenAIRE

    Heussen, Kai; Koch, Stephan; Ulbig, Andreas; Andersson, Goran

    2011-01-01

    The system-level consideration of inter- mittent renewable energy sources and small-scale en- ergy storage in power systems remains a challenge as either type is incompatible with traditional operation concepts. Non-controllability and energy-constraints are still considered contingent cases in market-based operation. The design of operation strategies for up to 100 % renewable energy systems requires an explicit consideration of non-dispatchable generation and stor- age capacities, as well a...

  17. The Analysis of the Usage And Perspectives of Renewable Energy Sources in Lithuania

    Directory of Open Access Journals (Sweden)

    Dominykas Vasarevičius

    2011-08-01

    Full Text Available The paper presents the current situation with the renewable energy sources in Lithuania. An overview of legislation promoting the production and usage of renewable energy in Lithuania is presented. Renewable energy production methods suitable for Lithuanian conditions, their advantages and disadvantages are discussed. It is shown that there is no any promotion from the state for usage of solar energy in private households. The potential of solar energy usage is determined. In order to show the effectiveness of solar thermal energy utilization under similar climatic conditions presented the example of promotion policy model and its results in Poland.Article in Lithuanian

  18. Survey on the consumptions of energy sources in the industry in Italy in 1999

    International Nuclear Information System (INIS)

    This report has the aim to introduce the results of the sampling survey performed to determinate the consumption of energy sources (electricity, natural gas, fuel oil, diesel oil, etc.) in the italian industry. The energy consumptions report to 1999 and they are disaggregated for typology of use: energy consumptions for productive uses, for production of energy and for traction. The energy intensive sectors and the great industries have represented the nucleus of survey. Particular attention has been devoted to the production of energy and the consumption of heat

  19. Dynamic Compression-Transmission for Energy-Harvesting Multihop Networks with Correlated Sources

    OpenAIRE

    Tapparello, Cristiano; Simeone, Osvaldo; Rossi, Michele

    2012-01-01

    Energy-harvesting wireless sensor networking is an emerging technology with applications to various fields such as environmental and structural health monitoring. A distinguishing feature of wireless sensors is the need to perform both source coding tasks, such as measurement and compression, and transmission tasks. It is known that the overall energy consumption for source coding is generally comparable to that of transmission, and that a joint design of the two classes of tasks can lead to ...

  20. Use a renewable energy sources and latest power-saving technologies in the the Republic Kazakstan

    International Nuclear Information System (INIS)

    The subject of alternative power in Kazakstan is brought up. Wind-, hydro-, solar power, biogas installation can improve the Republic power base. The main directions of activity of A. Einstein International Power engineering Academy on involving renewable energy sources and latest power-saving technologies to Republic of Kazakstan's fuel-power balance is given. It should be noted that renewable power engineering usually handles reversible energy sources and reserved power cycles. (author)

  1. Wind Power: A Renewable Energy Source for Mars Transit Vehicle

    Science.gov (United States)

    Flynn, Michael; Kohout, Lisa; Kliss, Mark (Technical Monitor)

    1998-01-01

    The Martian environment presents significant design challenges for the development of power generation systems. Nuclear-based systems may not be available due to political and safety concerns. The output of photovoltaics are limited by a solar intensity of 580 W/sqm as compared to 1353 W/sqm on Earth. The presence of dust particles in the Mars atmosphere will further reduce the photovoltaic output. Also, energy storage for a 12-hour night period must be provided. In this challenging environment, wind power generation capabilities may provide a viable option as a Martian power generation system. This paper provides an analysis of the feasibility of such a system.

  2. Solar-driven chemical energy source for a Martian biota

    Science.gov (United States)

    Clark, B. C.

    1979-01-01

    Microorganisms deep in the Martian soil could derive energy indirectly from the sun via chemical reactions involving atmospheric photolysis products of the solar ultraviolet flux. The Viking discovery of a chemically uniform regolith which, though poor in organics, is rich in sulfur-containing compounds suggests reaction sequences in which sulfur is recycled through reduced and oxidized states by biologically catalyzed reactions with photochemically-produced atmospheric constituents. One candidate reaction, reduction of soil sulfate minerals by molecular hydrogen, is already exploited on earth by bacteria of the ubiquitous and tenacious Desulfovibrio genus.

  3. Planck early results. XV. Spectral energy distributions and radio continuum spectra of northern extragalactic radio sources

    DEFF Research Database (Denmark)

    Aatrokoski, J.; Lavonen, N.; León-Tavares, J.;

    2011-01-01

    Spectral energy distributions (SEDs) and radio continuum spectra are presented for a northern sample of 104 extragalactic radio sources, based on the Planck Early Release Compact Source Catalogue (ERCSC) and simultaneous multifrequency data. The nine Planck frequencies, from 30 to 857 GHz, are co...

  4. Current Research on Molasses as an Alternative Energy Source for Organic Dairy Herds

    Science.gov (United States)

    As organic grain prices have increased and organic milk prices have decreased, dairy farmers are seeking lower-cost supplementation strategies. Sugarcane molasses, a rich source of sucrose, seems to be a viable option as a source of energy. Molasses frequently costs less per pound of dry matter than...

  5. High energy supercontinuum sources using tapered photonic crystal fibers for multispectral photoacoustic microscopy

    DEFF Research Database (Denmark)

    Bondu, Magalie; Brooks, Christopher; Jakobsen, Christian;

    2016-01-01

    We demonstrate a record bandwidth high energy supercontinuum source suitable for multispectral photoacoustic microscopy. The source has more than 150  nJ/10  nm150  nJ/10  nm bandwidth over a spectral range of 500 to 1600 nm. This performance is achieved using a carefully designed fiber taper...

  6. sources

    Directory of Open Access Journals (Sweden)

    Shu-Yin Chiang

    2002-01-01

    Full Text Available In this paper, we study the simplified models of the ATM (Asynchronous Transfer Mode multiplexer network with Bernoulli random traffic sources. Based on the model, the performance measures are analyzed by the different output service schemes.

  7. High energy supercontinuum sources using tapered photonic crystal fibers for multispectral photoacoustic microscopy.

    Science.gov (United States)

    Bondu, Magalie; Brooks, Christopher; Jakobsen, Christian; Oakes, Keith; Moselund, Peter Morten; Leick, Lasse; Bang, Ole; Podoleanu, Adrian

    2016-06-01

    We demonstrate a record bandwidth high energy supercontinuum source suitable for multispectral photoacoustic microscopy. The source has more than 150  nJ/10  nm bandwidth over a spectral range of 500 to 1600 nm. This performance is achieved using a carefully designed fiber taper with large-core input for improved power handling and small-core output that provides the desired spectral range of the supercontinuum source. PMID:26836298

  8. K X-ray fluorescent source for energy-channel calibration of the spectrometer

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    A new K X-ray fluorescent source for calibrating the X or γ-ray multichannel analyzer spectrometer is introduced. A detailed description of the K fluorescent source device is given. The calibration method used and experimental results obtained are presented. The purity and efficiency of K fluorescence photons from this device are discussed. This new fluorescent source may be used as a substitute for radioactive nuclides for the energy-channel calibration of some MCA spectrometers.

  9. High energy supercontinuum sources using tapered photonic crystal fibers for multispectral photoacoustic microscopy

    Science.gov (United States)

    Bondu, Magalie; Brooks, Christopher; Jakobsen, Christian; Oakes, Keith; Moselund, Peter Morten; Leick, Lasse; Bang, Ole; Podoleanu, Adrian

    2016-06-01

    We demonstrate a record bandwidth high energy supercontinuum source suitable for multispectral photoacoustic microscopy. The source has more than 150 nJ/10 nm bandwidth over a spectral range of 500 to 1600 nm. This performance is achieved using a carefully designed fiber taper with large-core input for improved power handling and small-core output that provides the desired spectral range of the supercontinuum source.

  10. Reliable pump sources for high-energy class lasers

    Science.gov (United States)

    Wölz, Martin; Pietrzak, Agnieszka; Kindsvater, Alex; Wolf, Jürgen; Meusel, Jens; Hülsewede, Ralf; Sebastian, Jürgen

    2015-05-01

    High-energy class laser systems operating at high average power are destined to serve fundamental research and commercial applications. System cost is becoming decisive, and JENOPTIK supports future developments with the new range of 500 W quasi-continuous wave (QCW) laser diode bars. In response to different strategies in implementing high-energy class laser systems, pump wavelengths of 880 nm and 940 nm are available. The higher power output per chip increases array irradiance and reduces the size of the optical system, lowering system cost. Reliability testing of the 880 nm laser diode bar has shown 1 Gshots at 500 W and 300 μs pulse duration, with insignificant degradation. Parallel operation in eight-bar diode stacks permits 4 kW pulse power operation. A new high-density QCW package is under development at JENOPTIK. Cost and reliability being the design criteria, the diode stacks are made by simultaneous soldering of submounts and insulating ceramic. The new QCW stack assembly technology permits an array irradiance of 12.5 kW/cm². We present the current state of the development, including laboratory data from prototypes using the new 500 W laser diode in dense packaging.

  11. Turbulence generation through intense localized sources of energy

    Science.gov (United States)

    Maqui, Agustin; Donzis, Diego

    2015-11-01

    Mechanisms to generate turbulence in controlled conditions have been studied for nearly a century. Most common methods include passive and active grids with a focus on incompressible turbulence. However, little attention has been given to compressible flows, and even less to hypersonic flows, where phenomena such as thermal non-equilibrium can be present. Using intense energy from lasers, extreme molecule velocities can be generated from photo-dissociation. This creates strong localized changes in both the hydrodynamics and thermodynamics of the flow, which may perturb the flow in a way similar to an active grid to generate turbulence in hypersonic flows. A large database of direct numerical simulations (DNS) are used to study the feasibility of such an approach. An extensive analysis of single and two point statistics, as well as spectral dynamics is used to characterize the evolution of the flow towards realistic turbulence. Local measures of enstrophy and dissipation are studied to diagnose the main mechanisms for energy exchange. As commonly done in compressible flows, dilatational and solenoidal components are separated to understand the effect of acoustics on the development of turbulence. Further results for cases that assimilate laboratory conditions will be discussed. The authors gratefully acknowledge the support of AFOSR.

  12. Alternative energy sources for non-highway transportation. Appendices

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    A planning study was made for DOE on alternate fuels for non-highway transportation (aircraft, rail, marine, and pipeline). The study provides DOE with a recommendation of what alternate fuels may be of interest to non-highway transportation users from now through 2025 and recommends R and D needed to allow non-petroleum derived fuels to be used in non-highway transportation. Volume III contains all of the references for the data used in the preliminary screening and is presented in 4 subvolumes. Volume IIIA covers the background information on the various prime movers used in the non-highway transportation area, the physical property data, the fuel-prime mover interaction and a review of some alternate energy forms. Volume IIIB covers the economics of producing, tranporting, and distributing the various fuels. Volume IIIC is concerned with the environment issues in production and use of the fuels, the energy efficiency in use and production, the fuel logistics considerations, and the overall ratings and selection of the fuels and prime movers for the detailed evaluation. Volume IIID covers the demand-related issues.

  13. X-ray Sources by Energy Recovered Linacs and Their Needed R&D

    Energy Technology Data Exchange (ETDEWEB)

    Geoffrey Krafft, Stephen Benson, Michael Borland, David Douglas, David Dowell, Carlos Hernandez-Garcia, Dmitry Kayran, Robert Legg, Elizabeth Moog, Takashi Obina, Robert Rimmer, Vitaly Yakimenko

    2011-05-01

    In this paper we review the current state of research on energy recovered linacs as drivers for future X-ray sources. For many types of user experiments, such sources may have substantial advantages compared to the workhorse sources of the present: high energy storage rings. Energy recovered linacs need to be improved beyond present experience in both energy and average current to support this application. To build an energy recovered linac based X-ray user facility presents many interesting challenges. We present summaries on the Research and Development (R&D) topics needed for full development of such a source, including the discussion at the Future Light Sources Workshop held in Gaithersberg, Maryland on September 15-17, 2009. A first iteration of an R&D plan is presented that is founded on the notion of building a set of succeedingly larger test accelerators exploring cathode physics, high average current injector physics, and beam recirculation and beam energy recovery at high average current. Our basic conclusion is that a reviewable design of such a source can be developed after an R&D period of reasonably short duration.

  14. Development, Integration and Utilization of Surface Nuclear Energy Sources for Exploration Missions

    Science.gov (United States)

    Houts, Michael G.; Schmidt, George R.; Bragg-Sitton, Shannon; Hickman, Robert; Hissam, Andy; Houston, Vance; Martin, Jim; Mireles, Omar; Reid, Bob; Schneider, Todd

    2005-01-01

    Throughout the past five decades numerous studies have identified nuclear energy as an enhancing or enabling technology for human surface exploration missions. Nuclear energy sources were used to provide electricity on Apollo missions 12, 14, 15, 16, and 17, and on the Mars Viking landers. Nuclear energy sources were used to provide heat on the Pathfinder; Spirit, and Discovery rovers. Scenarios have been proposed that utilize -1 kWe radioisotope systems for early missions, followed by fission systems in the 10 - 30 kWe range when energy requirements increase. A fission energy source unit size of approximately 150 kWt has been proposed based on previous lunar and Mars base architecture studies. Such a unit could support both early and advanced bases through a building block approach.

  15. Seminar on support mechanisms to renewable energy sources and on electricity markets evolution

    International Nuclear Information System (INIS)

    The French-German office for Renewable energies (OFAEnR) organised a Seminar on support mechanisms to renewable energy sources and on electricity markets evolution. In the framework of this French-German exchange of experience, about 150 participants exchanged views on support instruments to renewable energy sources in a context of decentralized power generation and evolving market design. This document brings together the available presentations (slides) made during this event: 1 - Overview of Support mechanisms to renewable energy sources and electricity market evolution in France (Pierre-Marie Abadie); 2 - Support mechanisms in Germany and in France. Similarities and Synergy potentials (Celine Najdawi); 3 - Keynote 'introduction to the French capacity market' (Thibaut Leinekugel Le Cocq); 4 - Power market design for a high renewables share (Max Rathmann); 5 - German electricity System and Integration of Renewable energies. The Current Discussion on the Necessity of Adapting the electricity Market Design (Ann-Christin Soekadar)

  16. Characterization of a radiographic system with broad energy band X-ray source

    International Nuclear Information System (INIS)

    High energy X-ray beams with broad band energy spectra allow performing radiographic analysis on different materials and objects of relevant interest that cannot be investigated with conventional X-ray sources. The quality of a radiographic image strongly depends on the characteristics of radiation source as the size of the X-ray emitting area, or focal spot, and the energy spectrum of the radiation. In this work the characterization of a broad-band energy Bremsstrahlung source obtained from a linac providing a 5.5 MeV electron beam colliding with a tungsten target is presented. In order to measure the focal-spot size an ad hoc slit camera has been designed and built and a specific technique was used. Furthermore an analysis of the energy spectrum of the beam was performed using a method based on X-ray diffraction by a mosaic crystal.

  17. An approach for evaluating the impact of an intermittent renewable energy source on transmission expansion planning

    Institute of Scientific and Technical Information of China (English)

    Rongrit CHATTHAWORN; Surachai CHAITUSANEY

    2015-01-01

    We propose a new robust optimization approach to evaluate the impact of an intermittent renewable energy source on transmission expansion planning (TEP). The objective function of TEP is composed of the investment cost of the transmission line and the operating cost of conventional generators. A method to select suitable scenarios representing the intermittent renewable energy generation and loads is proposed to obtain robust expansion planning for all possible scenarios. A meta-heuristic algorithm called adaptive tabu search (ATS) is employed in the proposed TEP. ATS iterates between the main problem, which minimizes the investment and operating costs, and the subproblem, which minimizes the cost of power generation from conventional generators and curtailments of renewable energy generation and loads. The subproblem is solved by nonlinear programming (NLP) based on an interior point method. Moreover, the impact of an intermittent renewable energy source on TEP was evaluated by comparing expansion planning with and without consideration of a renewable energy source. The IEEE Reliability Test System 79 (RTS 79) was used for testing the proposed method and evaluating the impact of an intermittent renewable energy source on TEP. The results show that the proposed robust optimization approach provides a more robust solution than other methods and that the impact of an intermittent renewable energy source on TEP should be considered.

  18. Photovoltaics as a terrestrial energy source. Volume 2: System value

    Science.gov (United States)

    Smith, J. L.

    1980-01-01

    Assumptions and techniques employed by the electric utility industry and other electricity planners to make estimates of the future value of photovoltaic (PV) systems interconnected with U.S. electric utilities were examined. Existing estimates of PV value and their interpretation and limitations are discussed. PV value is defined as the marginal private savings accruing to potential PV owners. For utility-owned PV systems, these values are shown to be the after-tax savings in conventional fuel and capacity displaced by the PV output. For non-utility-owned (distributed) systems, the utility's savings in fuel and capacity must first be translated through the electric rate structure (prices) to the potential PV system owner. Base-case estimates of the average value of PV systems to U.S. utilities are presented. The relationship of these results to the PV Program price goals and current energy policy is discussed; the usefulness of PV output quantity goals is also reviewed.

  19. Alternative energy sources for non-highway transportation: technical section

    Energy Technology Data Exchange (ETDEWEB)

    1980-06-01

    Eighteen different alternative fuels were considered in the preliminary screening, from three basic resource bases. Coal can be used to provide 13 of the fuels; oil shale was the source for three of the fuels; and biomass provided the resource base for two fuels not provided from coal. In the case of biomass, six different fuels were considered. Nuclear power and direct solar radiation were also considered. The eight prime movers that were considered in the preliminary screening are boiler/steam turbine; open and closed cycle gas turbines; low and medium speed diesels; spark ignited and stratified charge Otto cycles; electric motor; Stirling engine; free piston; and fuel cell/electric motor. Modes of transport considered are pipeline, marine, railroad, and aircraft. Section 2 gives the overall summary and conclusions, the future outlook for each mode of transportation, and the R and D suggestions by mode of transportation. Section 3 covers the preliminary screening phase and includes a summary of the data base used. Section 4 presents the methodology used to select the fuels and prime movers for the detailed study. Sections 5 through 8 cover the detailed evaluation of the pipeline, marine, railroad, and aircraft modes of transportation. Section 9 covers the demand related issues.

  20. Biogas - a new energy source saves fossil resources; Biogas - mit neuer Energie Ressourcen schonen

    Energy Technology Data Exchange (ETDEWEB)

    Thoss, C. (comp.)

    2001-07-01

    The new German Renewable Energy Sources Act (EEG) of 2000 made conditions for biogas more favourable - small wonder, as the German Biogas Association (Fachverband Biogas e.V.) co-operated with written expert opinions and many discussions with decision-makers. The subjects discussed at the 10th Biogas Conference reflect the current situation and will provide a basis for committee work in 2001. [German] Im Jahr 2000 haben sich die gesetzlichen Rahmenbedingungen fuer den Biogasbereich mit dem Inkrafttreten des erneuerbaren Energiegesetz (EEG) sehr positiv entwickelt. Der Fachverband Biogas e.V. hat mit schriftlichen Stellungnahmen und in vielen Gespraechen mit Entscheidungstraegern diese Bedingungen mitgestaltet. In Zukunft gibt es noch viele Aufgaben fuer eine effektive Interessenvertretung der Biogasbranche auf Laender- und Bundesebene. Die Themen, die auf der 10. Biogastagung diskutiert werden, spiegeln die Fragen wieder, die unter Experten derzeit intensiv diskutiert werden. Die Ergebnisse des Erfahrungsaustausches auf dieser Tagung werden die Grundlage fuer die Arbeit der Gremien im Fachverband Biogas im Jahr 2001 sein. Mit dem vorliegenden Tagungsband ist es gelungen, die Basis fuer die fachlichen Gespraeche waehrend und nach der Tagung schaffen. (orig.)

  1. Snow and ice as the source of energy. Energy shigen to shite no hyosetsu

    Energy Technology Data Exchange (ETDEWEB)

    Tsushima, K. (Toyama Univ., Toyama (Japan). Faculty of Science)

    1991-03-05

    Various methods have been carried on for the utilization of ice and snow as the source of energy in such fields as long time storage of harvested vegetables in the snow, air conditioning of buildings utilizing snow preserved till the summer period, combined snow and geothermal power generation system, production of fresh water by freezing saltwater into sherbet state, ice pond air conditioning system for buildings utilizing preserved snow which has been produced by snow machines, etc. An international symposium was held to investigate the towing and utilization of icebergs floating in the polar sea as water resources. Snow chambers can create a dark ice temperature environment with 0 {degree} C and 100% relative humidity, which are used for long time storage of vegetables and cereals. They can be used also for germination control of bulbs. Snow has sometimes an effect of improving photovoltaic power generation efficiency because reflected light (irregular reflection) is added in excess from snow having as high as 95% reflectance. Examples of the utilization of ice and snow as materials include such areas as artificial snow surface (runway), railroad tracks on ice, use as the base for petroleum drilling, etc. 29 refs., 8 figs.

  2. Governmental interventions in the energy market. Study of the Dutch level playing field for fossil fuels, renewable sources, nuclear energy and energy conservation

    International Nuclear Information System (INIS)

    This study has made an inventory of 53 governmental interventions in the Dutch energy market. Moreover, the consequences for the playing field for fossil fuels, renewable sources, nuclear energy and energy saving have been quantified. It shows that the government still stimulates the use of energy and fossil fuels more than it stimulates use of renewable energy sources. Policy that focuses on decreasing the price differences between sustainable and fossil should therefore focus on the phase-out of this support and subsequently on bridging the remaining financial gap.

  3. Hawaii Integrated Energy Assessment. Volume V. Rules, regulations, permits and policies affecting the development of alternate energy sources in Hawaii

    Energy Technology Data Exchange (ETDEWEB)

    1980-01-01

    A comprehensive presentaton of the major permits, regulations, rules, and controls which are likely to affect the development of alternate energy sources in Hawaii is presented. An overview of the permit process, showing the major categories and types of permits and controls for energy alternatives is presented. This is followed by a brief resume of current and projected changes designed to streamline the permit process. The permits, laws, regulations, and controls that are applicable to the development of energy alternatives in Hawaii are described. The alternate energy technologies affected, a description of the permit or control, and the requirements for conformance are presented for each applicable permit. Federal, state, and county permits and controls are covered. The individual energy technologies being considered as alternatives to the State's present dependence on imported fossil fuels are emphasized. The alternate energy sources covered are bioconversion, geothermal, ocean thermal, wind, solar (direct), and solid waste. For each energy alternative, the significant permits are summarized with a brief explanation of why they may be necessary. The framework of policy development at each of the levels of government with respect to the alternate energy sources is covered.

  4. Biomass as a Sustainable Energy Source: An Illustration of Chemical Engineering Thermodynamic Concepts

    Science.gov (United States)

    Mohan, Marguerite A.; May, Nicole; Assaf-Anid, Nada M.; Castaldi, Marco J.

    2006-01-01

    The ever-increasing global demand for energy has sparked renewed interest within the engineering community in the study of sustainable alternative energy sources. This paper discusses a power generation system which uses biomass as "fuel" to illustrate the concepts taught to students taking a graduate level chemical engineering process…

  5. The Struggle Against Global Warming: The Prospects for Renewable Energy Sources in Russia

    OpenAIRE

    Alexander Safonov

    2007-01-01

    Russia can and must take a leading position in promoting renewable energy. The widespread use of renewable energy sources will contribute to economic growth; improve living standards and quality of the environment. Simultaneously, Russia go the way of prevention of irreversible changes in the global climate system. Note: Downloadable document is in Russian.

  6. Case study: molasses as the primary energy source on an organic grazing dairy

    Science.gov (United States)

    Organic dairies face many challenges, one of which is the high cost of purchased organic grains. Molasses may be a less expensive energy alternative. However, anecdotal results have been mixed for farms that used molasses as the sole energy source. This research project quantified animal performance...

  7. Biomass: An Alternative Source of Energy for Eighth or Ninth Grade Science.

    Science.gov (United States)

    Heyward, Lillie; Murff, Marye

    This teaching unit develops the possibility of using biomass as an alternative source of energy. The concept of biomass is explained and the processes associated with its conversion to energy are stated. Suggestions for development of biomass technology in different geographic areas are indicated. Lessons for 6 days are presented for use with…

  8. Use of renewable energy sources in light of the “New Energy Strategy for Europe 2011–2020”

    International Nuclear Information System (INIS)

    Highlights: ► Theoretical and methodological achievements required for an analysis of energy strategy. ► Developments for an energy policy ensuring the appropriate utilization of renewable energy sources. ► EU should set up grants for research supporting the implementation of the strategy. ► Developments for the knowledge management support of the use of backcasting method. ► Principles for the development of the network of energy security centres. -- Abstract: The paper analyses the issues for consideration listed in the stock taking document “New Energy Strategy for Europe 2011–2020” and explores the impact of their implementation on the use of renewable energy sources. The main objective of the paper is to introduce and provide a summary of the theoretical and methodological achievements required for an analysis of the implications of such an EU level strategy. It also provides a summary of the results of the analysis of the impacts of the Strategy on a specific field; namely, on the use of renewable energy sources. Contradictions inherent in the Strategy are discussed as well, and a proposal is put forward to aid the resolution of these contradictions. The paper also points out that the further development of the theoretical and methodological achievements may result in the creation of a simulation model, the application of which could effectively aid the process of strategic planning and the testing of strategies prior to approval. Finally, the paper discusses how an EU level and/or a global network of energy security centres could promote the development and implementation of an energy policy ensuring the appropriate utilization of renewable energy sources.

  9. Dense Plasma Focus - From Alternative Fusion Source to Versatile High Energy Density Plasma Source for Plasma Nanotechnology

    Science.gov (United States)

    Rawat, R. S.

    2015-03-01

    The dense plasma focus (DPF), a coaxial plasma gun, utilizes pulsed high current electrical discharge to heat and compress the plasma to very high density and temperature with energy densities in the range of 1-10 × 1010 J/m3. The DPF device has always been in the company of several alternative magnetic fusion devices as it produces intense fusion neutrons. Several experiments conducted on many different DPF devices ranging over several order of storage energy have demonstrated that at higher storage energy the neutron production does not follow I4 scaling laws and deteriorate significantly raising concern about the device's capability and relevance for fusion energy. On the other hand, the high energy density pinch plasma in DPF device makes it a multiple radiation source of ions, electron, soft and hard x-rays, and neutrons, making it useful for several applications in many different fields such as lithography, radiography, imaging, activation analysis, radioisotopes production etc. Being a source of hot dense plasma, strong shockwave, intense energetic beams and radiation, etc, the DPF device, additionally, shows tremendous potential for applications in plasma nanoscience and plasma nanotechnology. In the present paper, the key features of plasma focus device are critically discussed to understand the novelties and opportunities that this device offers in processing and synthesis of nanophase materials using, both, the top-down and bottom-up approach. The results of recent key experimental investigations performed on (i) the processing and modification of bulk target substrates for phase change, surface reconstruction and nanostructurization, (ii) the nanostructurization of PLD grown magnetic thin films, and (iii) direct synthesis of nanostructured (nanowire, nanosheets and nanoflowers) materials using anode target material ablation, ablated plasma and background reactive gas based synthesis and purely gas phase synthesis of various different types of

  10. Design and Performance Evaluation of Energy Source for RFID Tag

    Directory of Open Access Journals (Sweden)

    Gaurav Thakur

    2013-11-01

    Full Text Available This paper presents a rectifying antenna (rectenna for the harvesting of the microwave energy associated to UHF (Ultra- High Frequency Radio Frequency Identification (RFID systems. The proposed device uses a microstrip line monopole with coplanar waveguide feeding line as receiving antenna and a five-stage voltage multiplier as rectifier. Experimental results demonstrating and RF-to-DC conversion efficiency of about 54% with an input power density will be presented and discussed . A compact rectenna circuit at 2.4 GHz is presented. A matching capacitor and five Parallel diodes are introduced to the rectifying circuit so as to achieve well impedance matching. There is a RF-DC conversion efficiency difference of about 3%. The experiment DC output voltage of the rectifying circuit with this novel design achieves 3.0V at a DC load which is a RFID tag. The RF-DC conversion efficiency at desired frequencies could be optimized. Zero bias Schottkey diode model for low RF input power and moderate DC current rectifying antennas (RECTENNAs is investigated. The model provides diode parameters at the desired output DC current level to be matched with the antenna so that optimum power transfer from antenna to the diode occurs

  11. Advanced Polymer Electrolytes for High-energy-density Power Sources

    Institute of Scientific and Technical Information of China (English)

    D. Golodnitsky; E. Livshits; R. Kovarsky; E. Peled

    2005-01-01

    @@ 1Introduction The preparation of highly controlled thin films of lithium ion conducting organic materials is becoming a challenging but rewarding goal in view of obtaining high-performance technological devices like solid-state polymer batteries and capacitors. The classical polymer electrolyte consists of organic macromolecules (usually polyether polymer) that are doped with inorganic (typically lithium) salts. Poly(ethylene oxide) (PEO) is the most commonly employed polymer in PEs because of the peculiar array in the (-CH2-CH2-O-)n chain providing the ability to solvate low-lattice-energy lithium salts. For three decades the major research attention was focused on amorphous polymer electrolytes in the belief that ionic conductivity occurs in a manner somewhat analogous to gas diffusion through polymer membranes. Segmental motion of the polymer chains continuously creates free volume, into which the ions migrate, and this process allows ions to progress across the electrolyte. Such a view was established by a number of experiments, and denied the possibility of ionic conductivity in crystalline polymer phases. This concept has been recently overturned by our group, demonstrating that conductivity comes about as a result of permanent conducting pathways for the movement of ions.

  12. Short rotation forestry as a source of energy

    Energy Technology Data Exchange (ETDEWEB)

    Neenan, M. (Agricultural Inst., Carlow (Ireland))

    1990-01-01

    Originally it was envisaged that fuel wood could be grown economically on poor quality soil, of which large areas occur in several EC countries. This project has shown that a yield of 15--18 t.D.M. ha{sup {minus}1} annum {sup {minus}1} can be obtained from short rotation coppice forestry over at least 4 harvestings. Since this project began in 1977, a surplus of many agricultural products has developed. An economic use for this surplus land is energy crops such as Short Rotation Forestry (SRF). On better quality land, poplar will usually outyield willow, but the coppicing ability of the newer genetically-improved poplar clones has yet to be proven. A systems analysis shows that on poor quality soils such as Atlantic blanket peat, SRF is uneconomic unless more productive species can be found. At the other centres, including mined-out peatland, SRF can be produced at a competitive cost. Methods and costs of harvesting have not yet been determined, and these are now probably the most critical factor in the introduction of SRF. The system is environmentally positive. SRF plantations increase the range of song and gamebirds. The resultant fuel is low in sulphur and arsenic, and so could help to overcome the problem of air pollution which is now a problem in many European cities. 51 refs., 8 figs., 33 tabs.

  13. BIOMASS UTILIZATION AS A RENEVABLE ENERGY SOURCE IN POLISH POWER INDUSTRY – CURRENT STATUS AND PERSPECTIVES

    Directory of Open Access Journals (Sweden)

    Beata Gołuchowska

    2015-06-01

    Full Text Available The depletion of the conventional energy sources, as well as the degradation and pollution of the environment by the exploitation of fossil fuels caused the development of renewable energy sources (RES, including biomass. In Poland, biomass is the most popular renewable energy source, which is closely related to the obligations associated with the membership in the EU. Biomass is the oldest renewable energy source, and its potential, diversity and polymorphism place it over other sources. Besides, the improvement in its parameters, including an increase in its calorific value, resulted in increasing use of biomass as energy source. In the electric power industry biomass is applied in the process of co-combustion with coal. This process may contribute, inter alia, to the reduction in the emissions of carbon, nitrogen and sulfur oxides. The article presents the characteristics of the biomass burned in power boilers of one of the largest Polish power plants, located in Opole Province (Southern Poland. Besides, the impact of biomass on the installation of co-combustion, as well as the advantages and disadvantages of the co-combustion process not only in technological, but also environmental, economic and social aspects were described.

  14. Sources

    OpenAIRE

    2015-01-01

    Sources Fondation Pablo Iglesias. Alcala de Henares. Sections : Archives privées de Manuel ArijaArchives extérieuresArchives FNJS de EspañaPrensa Archives Générales de l’Administration. Alcala de Henares. Sections : Opposition au franquismeSig. 653 Sig TOP 82/68.103-68.602.Índice de las cartas colectivas, Relaciones, Cartas al Ministro de Información de Marzo de 1965. c.662. Sources cinématographiques Filmothèque Nationale d’Espagne.NO.DO. N° 1157C. 08/03/1965.aguirre Javier, Blanco vertical....

  15. Neutronic Design and Measured Performance of the Low Energy Neutron Source (LENS) Target Moderator Reflector Assembly

    CERN Document Server

    Lavelle, C M; Bogdanov, A; Derenchuk, V P; Kaiser, H; Leuschner, M B; Lone, M A; Lozowski, W; Nann, H; Von Przewoski, B; Remmes, N; Rinckel, T; Shin, Y; Snow, W M; Sokol, P E

    2008-01-01

    The Low Energy Neutron Source (LENS) is an accelerator-based pulsed cold neutron facility under construction at the Indiana University Cyclotron Facility (IUCF). The idea behind LENS is to produce pulsed cold neutron beams starting with ~MeV neutrons from (p,n) reactions in Be which are moderated to meV energies and extracted from a small solid angle for use in neutron instruments which can operate efficiently with relatively broad (~1 msec) neutron pulse widths. Although the combination of the features and operating parameters of this source is unique at present, the neutronic design possesses several features similar to those envisioned for future neutron facilities such as long-pulsed spallation sources (LPSS) and very cold neutron (VCN) sources. We describe the underlying ideas and design details of the target/moderator/reflector system (TMR) and compare measurements of its brightness, energy spectrum, and emission time distribution under different moderator configurations with MCNP simulations. Brightnes...

  16. Alternative Sources of Energy - An Introduction to Fuel Cells

    Science.gov (United States)

    Merewether, E.A.

    2003-01-01

    Fuel cells are important future sources of electrical power and could contribute to a reduction in the amount of petroleum imported by the United States. They are electrochemical devices similar to a battery and consist of a container, an anode, a cathode, catalysts, an intervening electrolyte, and an attached electrical circuit. In most fuel cell systems, hydrogen is supplied to the anode and oxygen to the cathode which results in the production of electricity, water, and heat. Fuel cells are comparatively efficient and reliable, have no moving parts, operate without combustion, and are modular and scale-able. Their size and shape are flexible and adaptable. In operation, they are nearly silent, are relatively safe, and generally do not pollute the environment. During recent years, scientists and engineers have developed and refined technologies relevant to a variety of fuel cells. Types of fuel cells are commonly identified by the composition of their electrolyte, which could be either phosphoric acid, an alkaline solution, a molten carbonate, a solid metal oxide, or a solid polymer membrane. The electrolyte in stationary power plants could be phosphoric acid, molten carbonates, or solid metal oxides. For vehicles and smaller devices, the electrolyte could be an alkaline solution or a solid polymer membrane. For most fuel cell systems, the fuel is hydrogen, which can be extracted by several procedures from many hydrogen-bearing substances, including alcohols, natural gas (mainly methane), gasoline, and water. There are important and perhaps unresolved technical problems associated with using fuel cells to power vehicles. The catalysts required in several systems are expensive metals of the platinum group. Moreover, fuel cells can freeze and not work in cold weather and can be damaged by impacts. Storage tanks for the fuels, particularly hydrogen, must be safe, inexpensive, of a reasonable size, and contain a supply sufficient for a trip of several hundred miles

  17. Matching device load from the source of electrical energy

    OpenAIRE

    Romashko, V. Y.

    2013-01-01

    Проанализированы особенности использования различных типов импульсных регуляторов постоянного напряжения для обеспечения режима передачи максимальной мощности от источника электрической энергии в нагрузку. Рассмотрены случаи непосредственной передачи энергии в нагрузку и использования буферного аккумулятора. Даны рекомендации по использованию конкретных типов регуляторов. The features of different types of DC converters to ensure maximum power transfer mode from the source of electrical en...

  18. The current state of nonconventional sources of energy and related perspectives

    Directory of Open Access Journals (Sweden)

    Paulo César Narváez Rincón

    2010-10-01

    Full Text Available This article presents an overview of world and Colombian energy sources, including distribution, production and consumption by fuel and end-user sectors, respectively, as well as a brief description of some non-conventional energy sources (NCES, pointing out those classified as bioenergy and used as non-conventional fuels in the transport and electricity generating sectors. Colombian policies for promoting the rational use of energy (RUE and NCES are presented and their targets are compared to some established by the European Union and the USA.

  19. Study of Effect of Ion Source Energy Spread on RFQ Beam Dynamics at REX-ISOLDE

    CERN Document Server

    Fraser, M A

    2013-01-01

    With an upgrade to the Electron Beam Ion Source (EBIS) at REX under consideration a study was launched in order to understand the effect of an increased energy spread from the ion source on the beam dynamics of the RFQ. Due to the increased electron beam potential needed to achieve the upgrade’s charge breeding specification it is expected that the energy spread of the beam will increase from today’s estimated value of approximately +-0.1%. It is shown through beam dynamics simulations that the energy spread can be increased to +-1% without significant degradation of the beam quality output by the RFQ.

  20. A New Method for Finding Point Sources in High-energy Neutrino Data

    CERN Document Server

    Fang, Ke

    2016-01-01

    The IceCube collaboration has reported the first detection of high-energy astrophysical neutrinos including $\\sim 50$ high-energy starting events, but no individual sources have been identified. It is therefore important to develop the most sensitive and efficient possible algorithms to identify point sources of these neutrinos. The most popular current method works by exploring a dense grid of possible directions to individual sources, and identifying the single direction with the maximum probability of having produced multiple detected neutrinos. This method has numerous strengths, but it is computationally intensive and, because it focuses on the single best location for a point source, additional point sources are not included in the evidence. We propose a new maximum likelihood method that uses the angular separations between all pairs of neutrinos in the data. Unlike existing autocorrelation methods for this type of analysis, which also use angular separations between neutrino pairs, our method incorpor...