WorldWideScience

Sample records for alternatives-total solvent-free analysis

  1. Solvent-free fluidic organic dye lasers.

    Science.gov (United States)

    Choi, Eun Young; Mager, Loic; Cham, Tran Thi; Dorkenoo, Kokou D; Fort, Alain; Wu, Jeong Weon; Barsella, Alberto; Ribierre, Jean-Charles

    2013-05-06

    We report on the demonstration of liquid organic dye lasers based on 9-(2-ethylhexyl)carbazole (EHCz), so-called liquid carbazole, doped with green- and red-emitting laser dyes. Both waveguide and Fabry-Perot type microcavity fluidic organic dye lasers were prepared by capillary action under solvent-free conditions. Cascade Förster-type energy transfer processes from liquid carbazole to laser dyes were employed to achieve color-variable amplified spontaneous emission and lasing. Overall, this study provides the first step towards the development of solvent-free fluidic organic semiconducting lasers and demonstrates a new kind of optoelectronic applications for liquid organic semiconductors.

  2. Enantioselective solvent-free Robinson annulation reactions

    Indian Academy of Sciences (India)

    Unknown

    The use of proline or any other amino acid in asymmetric annulation reactions in a solid–liquid phase reaction in the absence of solvents to effect an asymmetric synthesis is an important step forward towards cleaner synthesis 2. ... Reports on solvent-free reactions have become increasingly frequent and the field has.

  3. Dynamics of solvent-free grafted nanoparticles

    KAUST Repository

    Chremos, Alexandros

    2012-01-01

    The diffusivity and structural relaxation characteristics of oligomer-grafted nanoparticles have been investigated with simulations of a previously proposed coarse-grained model at atmospheric pressure. Solvent-free, polymer-grafted nanoparticles as well as grafted nanoparticles in a melt were compared to a reference system of bare (ungrafted) particles in a melt. Whereas longer chains lead to a larger hydrodynamic radius and lower relative diffusivity for grafted particles in a melt, bulk solvent-free nanoparticles with longer chains have higher relative diffusivities than their short chain counterparts. Solvent-free nanoparticles with short chains undergo a glass transition as indicated by a vanishing diffusivity, diverging structural relaxation time and the formation of body-centered-cubic-like order. Nanoparticles with longer chains exhibit a more gradual increase in the structural relaxation time with decreasing temperature and concomitantly increasing particle volume fraction. The diffusivity of the long chain nanoparticles exhibits a minimum at an intermediate temperature and volume fraction where the polymer brushes of neighboring particles overlap, but must stretch to fill the interparticle space. © 2012 American Institute of Physics.

  4. Synthesis of halide- and solvent free metal borohydrides

    DEFF Research Database (Denmark)

    Grinderslev, Jakob; Møller, Kasper Trans; Richter, Bo

    have challenges due to their high desorption kinetics and limited reversibility at moderate conditions.[2],[3],[4] In this work, we present a new approach to synthesize halide- and solvent free metal borohydrides starting from the respective metal hydride. The synthetic strategy ensures that no metal...... to the metal. Hence, the powdered M(BH4)3∙DMS is heated to 140 °C for 4 hours to obtain pure M(BH4)3. The rare-earth metal borohydrides have been investigated by infrared spectroscopy and thermal analysis (TGA-DSC-MS). Furthermore, the structural trends are investigated by synchrotron radiation powder X...

  5. Oligoquinolines under Solvent-free Microwave Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Park, Kwi-Jeon; Kwon, Tae-Woo [Kyungsung University, Busan (Korea, Republic of)

    2015-01-15

    Quinolines are thermally stable and can be used as an excellent n-type semiconducting materials. Since quinolines are also known to be electron acceptor molecules, combination of various electron donor building blocks can be utilized in photonic and electronic organic light-emitting diode (OLED) applications. For example, donor.acceptor systems with phenothiazine (or carbazole) molecules as electron donors and the phenylquinoline group as an electron acceptor provide an efficient approach for the design of new materials exhibiting highly efficient charge-transfer photophysics and electroluminescence in OLEDs. We have described the Friedlander quinoline synthesis between aminobenzophenones and symmetrical diacetyl compounds having phenothiazine, carbazole, biphenyl, and phenyl moieties under solvent-free microwave irradiation in 12.98% isolated yields.

  6. Organic Synthesis under Solvent-free Condition. An Environmentally ...

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 7; Issue 11. Organic Synthesis under Solvent-free Condition: An Environmentally Benign Procedure – II. Gopalpur Nagendrappa. General Article Volume 7 Issue 11 November 2002 pp 64-69 ...

  7. Solvent-free covalent functionalization of nanodiamond with amines

    International Nuclear Information System (INIS)

    Basiuk, Elena V.; Santamaría-Bonfil, Adriana; Meza-Laguna, Victor; Gromovoy, Taras Yu.; Alvares-Zauco, Edgar; Contreras-Torres, Flavio F.; Rizo, Juan; Zavala, Guadalupe; Basiuk, Vladimir A.

    2013-01-01

    Covalent functionalization of pristine nanodiamond (ND) with 1,12-diaminododecane (DAD), 1,5-diaminonaphthalene (DAN), poly(ethylene glycol) diamine (PEGDA), and polyethylenimine (PEI) was carried out by employing solvent-free methodology, which is based on thermal instead of chemical activation of carboxylic groups at ND surface. A simple solubility/dispersibility test in water and isopropanol showed an increased lipophilicity of the functionalized samples. The conversion of intrinsic carboxylic groups into the corresponding amide derivatives was characterized by means of Fourier-transform infrared spectroscopy. Thermogravimetric analysis found the highest organic content of about 18% for ND-PEI, followed by ND-DAD, for which the contribution of covalently bonded diamine was estimated to be of ca. 10%. In temperature programmed desorption measurements with mass spectrometric detection, the presence of organic functionalizing groups changed both mass spectra and thermodesorption curves of ND. The changes in morphology of primary and secondary ND aggregates were characterized by scanning and transmission electron microscopy, as well as by atomic force microscopy. The current–voltage measurements under atmospheric pressure found an increased conductivity for ND-DAN, as compared to that of pristine ND, whereas for ND-DAD, ND-PEGDA and ND-PEI a dramatic decrease in conductivity due to functionalization was observed.

  8. Solvent-free covalent functionalization of nanodiamond with amines

    Energy Technology Data Exchange (ETDEWEB)

    Basiuk, Elena V., E-mail: elenagd@unam.mx [Centro de Ciencias Aplicadas y Desarrollo Tecnológico, Universidad Nacional Autónoma de México, Circuito Exterior, Ciudad Universitaria, 04510 México D.F. (Mexico); Santamaría-Bonfil, Adriana; Meza-Laguna, Victor [Centro de Ciencias Aplicadas y Desarrollo Tecnológico, Universidad Nacional Autónoma de México, Circuito Exterior, Ciudad Universitaria, 04510 México D.F. (Mexico); Gromovoy, Taras Yu. [Institute of Surface Chemistry, National Academy of Sciences of the Ukraine, Gen. Naumova 17, 03164 Kiev (Ukraine); Alvares-Zauco, Edgar [Facultad de Ciencias, Universidad Nacional Autónoma de México, Circuito Exterior, Ciudad Universitaria, 04510 México D.F. (Mexico); Contreras-Torres, Flavio F.; Rizo, Juan [Centro de Ciencias Aplicadas y Desarrollo Tecnológico, Universidad Nacional Autónoma de México, Circuito Exterior, Ciudad Universitaria, 04510 México D.F. (Mexico); Zavala, Guadalupe [Instituto de Biotecnología, Universidad Nacional Autónoma de México, Av. Universidad 2001, Col. Chamilpa, 62210, Cuernavaca, Morelos (Mexico); Basiuk, Vladimir A. [Instituto de Ciencias Nucleares, Universidad Nacional Autónoma de México, Circuito Exterior, Ciudad Universitaria, 04510 México, D.F. (Mexico)

    2013-06-15

    Covalent functionalization of pristine nanodiamond (ND) with 1,12-diaminododecane (DAD), 1,5-diaminonaphthalene (DAN), poly(ethylene glycol) diamine (PEGDA), and polyethylenimine (PEI) was carried out by employing solvent-free methodology, which is based on thermal instead of chemical activation of carboxylic groups at ND surface. A simple solubility/dispersibility test in water and isopropanol showed an increased lipophilicity of the functionalized samples. The conversion of intrinsic carboxylic groups into the corresponding amide derivatives was characterized by means of Fourier-transform infrared spectroscopy. Thermogravimetric analysis found the highest organic content of about 18% for ND-PEI, followed by ND-DAD, for which the contribution of covalently bonded diamine was estimated to be of ca. 10%. In temperature programmed desorption measurements with mass spectrometric detection, the presence of organic functionalizing groups changed both mass spectra and thermodesorption curves of ND. The changes in morphology of primary and secondary ND aggregates were characterized by scanning and transmission electron microscopy, as well as by atomic force microscopy. The current–voltage measurements under atmospheric pressure found an increased conductivity for ND-DAN, as compared to that of pristine ND, whereas for ND-DAD, ND-PEGDA and ND-PEI a dramatic decrease in conductivity due to functionalization was observed.

  9. Structural Transitions of Solvent-Free Oligomer-Grafted Nanoparticles

    KAUST Repository

    Chremos, Alexandros

    2011-09-01

    Novel structural transitions of solvent-free oligomer-grafted nanoparticles are investigated by using molecular dynamics simulations of a coarse-grained bead-spring model. Variations in core size and grafting density lead to self-assembly of the nanoparticles into a variety of distinct structures. At the boundaries between different structures, the nanoparticle systems undergo thermoreversible transitions. This structural behavior, which has not been previously reported, deviates significantly from that of simple liquids. The reversible nature of these transitions in solvent-free conditions offers new ways to control self-assembly of nanoparticles at experimentally accessible conditions. © 2011 American Physical Society.

  10. SHORT COMMUNICATION SOLVENT FREE PREPARATION OF N ...

    African Journals Online (AJOL)

    Preferred Customer

    carboxy, 4-bromo, 4- hydroxy ... which are an important class of substrates for biological as chemical probes of protein structure. [1], as a .... Table 1. Mixing time, melting point, yield% and elemental analysis of prepared N-substituted maleanilic acids.

  11. One-pot Solvent-free Catalytic Dimerization Reaction of ...

    Indian Academy of Sciences (India)

    Abstract. In this study, we report a smooth one-pot, solvent-free catalytic dimerization of phenylacetylene. (1) to 1-phenylnaphthalene (2) by Cu/C at room temperature in good yield (∼100%). In the computational study, the structure of the 1-phenylnaphthalene was optimized by DFT-B3LYP/6-31G* method. The rotation.

  12. Organic Synthesis under Solvent-free Condition. An Environmentally ...

    Indian Academy of Sciences (India)

    GENERAL I ARTICLE. Organic Synthesis under Solvent-free Condition. An Environmentally Benign Procedure - II. The author is a Professor of Organic Chemistry at. Bangalore University,. Bangalore. His main area of research is organosilicon chemistry with particular attention to developing new synthetic procedures and.

  13. Highly Efficient Method for Solvent-Free Synthesis of Diarylmethane ...

    African Journals Online (AJOL)

    NICO

    2011-02-25

    Feb 25, 2011 ... methane and triarylmethane was studied at room temperature, under solvent-free conditions, for five successive runs. In each run, the reaction was stopped after 120 min, cooled and sus- pended in anhydrous CH2Cl2. The suspension was then filtered and the reagent washed with anhydrous CH2Cl2 (2 ...

  14. dichlorodiazene dioxides using levulinic acid under solvent-free ...

    Indian Academy of Sciences (India)

    Administrator

    preparation of these compounds starting from alkenes adopting the Green Chemistry principle of solvent- free reaction. The procedure involves addition of NOCl generated in situ by the reaction of AcOH–HCl. (3 :1) with amyl nitrite to alkenes and treating the α-chloronitroso compounds obtained as dimers with levulinic acid ...

  15. Microwave accelerated solvent-free synthesis of flavanones

    Energy Technology Data Exchange (ETDEWEB)

    Sagrera, Gabriel J. [Universidad de la Republica, Montevideo (Uruguay). Facultad de Ciencias. Dept. de Quimica Organica]. E-mail: gseoane@fq.edu.uy; Seoane, Gustavo A. [Universidad de la Republica, Montevideo (Uruguay). Facultad de Quimica

    2005-07-15

    Microwave irradiation of chalcones under solvent-free conditions resulted in a 'green-chemistry' procedure for the preparation of flavanones in very good yields. Using an unmodified household microwave oven, different mineral supports and catalysts were tested. By irradiation of chalcones with 30% TFA over silica gel, eleven known flavanones and five new compounds were prepared in high yields. (author)

  16. Solvent-free synthesis of xanthene derivatives by Preyssler type ...

    African Journals Online (AJOL)

    naphthol in the presence of a catalytic amount of Preyssler type heteropolyacid, H14[NaP5W30O110], as a green and reusable catalyst under solvent-free conditions to form a variety of new xanthene derivatives in very good yields.

  17. Highly efficient solvent-free synthesis of pyranopyrazoles by a ...

    Indian Academy of Sciences (India)

    phate [(CH2)4SO3HMIM][HSO4], an acidic ionic liquid and as a catalyst, under solvent-free conditions. The ... cyano ethylene. In addition, weak bases can also be used for this Michael-type cyclization.7 Other recent methods for the synthesis of pyranopyrazoles ... absolute ethanol,8 a two-component reaction involv-.

  18. GRINDING SOLVENT-FREE PAAL-KNORR PYRROLE SYNTHESIS ...

    African Journals Online (AJOL)

    solvent-free condensation reaction of 2,5-hexanedione with various primary amines (Paal-Knorr pyrrole synthesis) on smectite ... Paal-Knorr pyrrole synthesis on smectites as recyclable and green catalysts. Bull. Chem. Soc. ..... 10. a) Determined in our laboratory by temperature-programmed desorption of ammonia gas.

  19. Solvent free lipase catalyzed synthesis of butyl caprylate

    Indian Academy of Sciences (India)

    MEERA T SOSE

    2017-11-10

    Nov 10, 2017 ... Special Issue on Recent Trends in the Design and Development of Catalysts and their Applications. Solvent free lipase catalyzed synthesis of butyl caprylate. MEERA T SOSE, SNEHA R .... and keeping others constant. It is also very important to prevent excess water formation as it results to give back the ...

  20. Organic Synthesis under Solvent-free Condition. An Environmentally ...

    Indian Academy of Sciences (India)

    with particular attention to developing new synthetic procedures and reagents, and ... academic interest in solid-solid reactions have led them in recent times to develop methodologies for solvent-free ... ronment-friendly synthetic procedures has made them turn their attention to minimize or circumvent the use of solvents.

  1. Perlite-SO3H nanoparticles as an efficient and reusable catalyst for one-pot three-component synthesis of 1,2-dihydro-1-aryl-naphtho[1,2-e][1,3]oxazine-3-one derivatives under both microwave-assisted and thermal solvent-free conditions: Single crystal X-ray structure analysis and theoretical study

    Directory of Open Access Journals (Sweden)

    Ali Ramazani

    2016-01-01

    Full Text Available A general synthetic route for the synthesis of 1,2-dihydro-1-aryl-naphtho[1,2-e][1,3]oxazine-3-one derivatives has been developed using perlite-SO3H nanoparticles as efficient catalyst under both microwave-assisted and thermal solvent-free conditions. The combination of 2-naphthol, aldehyde and urea enabled the synthesis of 1,2-dihydro-1-aryl-naphtho[1,2-e][1,3]oxazine-3-one derivatives in the presence of perlite-SO3H nanoparticles in good to excellent yields. This method provides several advantages like simple work-up, environmentally benign, and shorter reaction times along with high yields. In order to explore the recyclability of the catalyst, the perlite-SO3H nanoparticles in solvent-free conditions were used as catalyst for the same reaction repeatedly and the change in their catalytic activity was studied. It was found that perlite-SO3H nanoparticles could be reused for four cycles with negligible loss of their activity. Single crystal X-ray structure analysis and theoretical studies also were investigated for 4i product. The electronic properties of the compound have been analyzed using DFT calculations (B3LYP/6-311+G*. The FMO analysis suggests that charge transfer takes place within the molecule and the HOMO is localized mainly on naphthalene and oxazinone rings whereas the LUMO resides on the naphthalene ring.

  2. Rapid analysis of the essential oils from dried Illicium verum Hook. f. and Zingiber officinale Rosc. by improved solvent-free microwave extraction with three types of microwave-absorption medium.

    Science.gov (United States)

    Wang, Ziming; Wang, Lu; Li, Tiechun; Zhou, Xin; Ding, Lan; Yu, Yong; Yu, Aimin; Zhang, Hanqi

    2006-11-01

    A new method of extracting essential oils from dried plant materials has been studied. By adding a microwave-absorption medium (MAM) to a reactor, solvent-free microwave extraction (SFME) was improved and can be used to extract essential oils from dried plant material without pretreatment. With a microwave irradiation power of 85 W it took only approximately 30 min to extract the essential oils completely. The whole extraction process is simple, rapid, and economical. Three types of MAM, iron carbonyl powder (ICP), graphite powder (GP), and activated carbon powder (ACP), and two types of dried plant material, Illicium verum Hook. f. and Zingiber officinale Rosc., were studied. The results were compared with those obtained by use of conventional SFME, microwave-assisted hydrodistillation (MAHD), and conventional hydrodistillation (HD), and the conclusion drawn was that improved SFME was a feasible means of extracting essential oils from dried plant materials, because there were few differences between the composition of the essential oils extracted by improved SFME and by the other methods.

  3. 21 CFR 182.20 - Essential oils, oleoresins (solvent-free), and natural extractives (including distillates).

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 3 2010-04-01 2009-04-01 true Essential oils, oleoresins (solvent-free), and...) SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Provisions § 182.20 Essential oils, oleoresins (solvent-free), and natural extractives (including distillates). Essential oils, oleoresins (solvent-free), and...

  4. 21 CFR 582.20 - Essential oils, oleoresins (solvent-free), and natural extractives (including distillates).

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 6 2010-04-01 2010-04-01 false Essential oils, oleoresins (solvent-free), and... SUBSTANCES GENERALLY RECOGNIZED AS SAFE General Provisions § 582.20 Essential oils, oleoresins (solvent-free), and natural extractives (including distillates). Essential oils, oleoresins (solvent-free), and...

  5. Solvent-Free Synthesis of Some1-Acetyl Pyrazoles

    Energy Technology Data Exchange (ETDEWEB)

    Thirunarayanan, Ganesamoorthy [Annamalai Univ., Tamil Nadu (India); Sekar, Krishnamoorthy Guna [National College, Tiruchirappalli (India)

    2013-10-15

    Some N-acetyl pyrazoles including 1-(3-(3,4-dichlorophenyl)-5-(substituted phenyl)-4,5-dihydro-{sup 1}H-pyrazole-1-yl) ethanones have been synthesised by solvent free cyclization cum acetylation of chalcones like substituted styryl 3,4-dichlorophenyl ketones using hydrazine hydrate and acetic anhydride in presence of catalytic amount of fly-ash: H{sub 2}SO{sub 4} catalyst. The yield of these N-acetyl pyrazole derivatives are more than 75%. The synthesised N-acetyl pyrazoline derivatives were characterized by their physical constants and spectral data.

  6. Solvent-free Liquid Crystals and Liquids from DNA.

    Science.gov (United States)

    Liu, Kai; Shuai, Min; Chen, Dong; Tuchband, Michael; Gerasimov, Jennifer Y; Su, Juanjuan; Liu, Qing; Zajaczkowski, Wojciech; Pisula, Wojciech; Müllen, Klaus; Clark, Noel A; Herrmann, Andreas

    2015-03-23

    As DNA exhibits persistent structures with dimensions that exceed the range of their intermolecular forces, solid-state DNA undergoes thermal degradation at elevated temperatures. Therefore, the realization of solvent-free DNA fluids, including liquid crystals and liquids, still remains a significant challenge. To address this intriguing issue, we demonstrate that combining DNA with suitable cationic surfactants, followed by dehydration, can be a simple generic scheme for producing these solvent-free DNA fluid systems. In the anhydrous smectic liquid crystalline phase, DNA sublayers are intercalated between aliphatic hydrocarbon sublayers. The lengths of the DNA and surfactant are found to be extremely important in tuning the physical properties of the fluids. Stable liquid-crystalline and liquid phases are obtained in the -20 °C to 200 °C temperature range without thermal degradation of the DNA. Thus, a new type of DNA-based soft biomaterial has been achieved, which will promote the study and application of DNA in a much broader context. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Photo-triggered solvent-free metamorphosis of polymeric materials.

    Science.gov (United States)

    Honda, Satoshi; Toyota, Taro

    2017-09-11

    Liquefaction and solidification of materials are the most fundamental changes observed during thermal phase transitions, yet the design of organic and polymeric soft materials showing isothermal reversible liquid-nonliquid conversion remains challenging. Here, we demonstrate that solvent-free repeatable molecular architectural transformation between liquid-star and nonliquid-network polymers that relies on cleavage and reformation of a covalent bond in hexaarylbiimidazole. Liquid four-armed star-shaped poly(n-butyl acrylate) and poly(dimethyl siloxane) with 2,4,5-triphenylimidazole end groups were first synthesized. Subsequent oxidation of the 2,4,5-triphenylimidazoles into 2,4,5-triphenylimidazoryl radicals and their coupling with these liquid star polymers to form hexaarylbiimidazoles afforded the corresponding nonliquid network polymers. The resulting nonliquid network polymers liquefied upon UV irradiation and produced liquid star-shaped polymers with 2,4,5-triphenylimidazoryl radical end groups that reverted to nonliquid network polymers again by recoupling of the generated 2,4,5-triphenylimidazoryl radicals immediately after terminating UV irradiation.The design of organic and polymeric soft materials showing isothermal reversible liquid-nonliquid conversion is challenging. Here, the authors show solvent-free repeatable molecular architectural transformation between liquid-star and non-liquid-network polymers by the cleavage and reformation of covalent bonds in the polymer chain.

  8. Development of solvent-free ambient mass spectrometry for green chemistry applications.

    Science.gov (United States)

    Liu, Pengyuan; Forni, Amanda; Chen, Hao

    2014-04-15

    Green chemistry minimizes chemical process hazards in many ways, including eliminating traditional solvents or using alternative recyclable solvents such as ionic liquids. This concept is now adopted in this study for monitoring solvent-free reactions and analysis of ionic liquids, solids, and catalysts by mass spectrometry (MS), without using any solvent. In our approach, probe electrospray ionization (PESI), an ambient ionization method, was employed for this purpose. Neat viscous room-temperature ionic liquids (RTILs) in trace amounts (e.g., 25 nL) could be directly analyzed without sample carryover effect, thereby enabling high-throughput analysis. With the probe being heated, it can also ionize ionic solid compounds such as organometallic complexes as well as a variety of neat neutral solid chemicals (e.g., amines). More importantly, moisture-sensitive samples (e.g., [bmim][AlCl4]) can be successfully ionized. Furthermore, detection of organometallic catalysts (including air-sensitive [Rh-MeDuPHOS][OTf]) in ionic liquids, a traditionally challenging task due to strong ion suppression effect from ionic liquids, can be enabled using PESI. In addition, PESI can be an ideal approach for monitoring solvent-free reactions. Using PESI-MS, we successfully examined the alkylation of amines by alcohols, the conversion of pyrylium into pyridinium, and the condensation of aldehydes with indoles as well as air- and moisture-sensitive reactions such as the oxidation of ferrocene and the condensation of pyrazoles with borohydride. Interestingly, besides the expected reaction products, the reaction intermediates such as the monopyrazolylborate ion were also observed, providing insightful information for reaction mechanisms. We believe that the presented solvent-free PESI-MS method would impact the green chemistry field.

  9. Ultra-high dispersion of graphene in polymer composite via solvent free fabrication and functionalization

    Science.gov (United States)

    Noh, Ye Ji; Joh, Han-Ik; Yu, Jaesang; Hwang, Soon Hyoun; Lee, Sungho; Lee, Cheol Ho; Kim, Seong Yun; Youn, Jae Ryoun

    2015-03-01

    The drying process of graphene-polymer composites fabricated by solution-processing for excellent dispersion is time consuming and suffers from a restacking problem. Here, we have developed an innovative method to fabricate polymer composites with well dispersed graphene particles in the matrix resin by using solvent free powder mixing and in-situ polymerization of a low viscosity oligomer resin. We also prepared composites filled with up to 20 wt% of graphene particles by the solvent free process while maintaining a high degree of dispersion. The electrical conductivity of the composite, one of the most significant properties affected by the dispersion, was consistent with the theoretically obtained effective electrical conductivity based on the mean field micromechanical analysis with the Mori-Tanaka model assuming ideal dispersion. It can be confirmed by looking at the statistical results of the filler-to-filler distance obtained from the digital processing of the fracture surface images that the various oxygenated functional groups of graphene oxide can help improve the dispersion of the filler and that the introduction of large phenyl groups to the graphene basal plane has a positive effect on the dispersion.

  10. Cyanuric Chloride-Catalyzed Michael Addition of Indoles to Nitroolefins under Solvent-Free Conditions

    Directory of Open Access Journals (Sweden)

    Xiao Juan Yang

    2013-01-01

    Full Text Available Cyanuric chloride is an inexpensive, efficient, and mild catalyst for the Michael addition of indoles to nitroolefins at 70°C under solvent-free conditions. The simple experimental procedure, solvent-free reaction conditions, utilization of an inexpensive and readily available catalyst, short period of conversion, and excellent yields are the advantages of the present method.

  11. Antimicrobial nanocapsules: from new solvent-free process to in vitro efficiency

    Directory of Open Access Journals (Sweden)

    Steelandt J

    2014-09-01

    Full Text Available Julie Steelandt,1 Damien Salmon,1,2 Elodie Gilbert,1 Eyad Almouazen,3 François NR Renaud,4 Laurène Roussel,1 Marek Haftek,5 Fabrice Pirot1,2 1University Claude Bernard Lyon 1, Faculty of Pharmacy, Fundamental, Clinical and Therapeutic Aspects of Skin Barrier Function, FRIPharm, Laboratoire de Pharmacie Galénique Industrielle, 2Hospital Pharmacy, FRIPharm, Hospital Edouard Herriot, Hospices Civils de Lyon, 3Laboratoire d’Automatique et de Génie des Procédés, University Claude Bernard Lyon 1, 4University Claude Bernard Lyon 1, UMR CNRS 5510/MATEIS, 5University Claude Bernard Lyon 1, Faculty of Pharmacy, Fundamental, Clinical and Therapeutic Aspects of Skin Barrier Function, FRIPharm, Laboratoire de Dermatologie, Lyon, France Abstract: Skin and mucosal infections constitute recurrent pathologies resulting from either inappropriate antiseptic procedures or a lack of efficacy of antimicrobial products. In this field, nanomaterials offer interesting antimicrobial properties (eg, long-lasting activity; intracellular and tissular penetration as compared to conventional products. The aim of this work was to produce, by a new solvent-free process, a stable and easily freeze-dryable chlorhexidine-loaded polymeric nanocapsule (CHX-NC suspension, and then to assess the antimicrobial properties of nanomaterials. The relevance of the process and the physicochemical properties of the CHX-NCs were examined by the assessment of encapsulation efficiency, stability of the nanomaterial suspension after 1 month of storage, and by analysis of granulometry and surface electric charge of nanocapsules. In vitro antimicrobial activities of the CHX-NCs and chlorhexidine digluconate solution were compared by measuring the inhibition diameters of two bacterial strains (Escherichia coli and Staphylococcus aureus and one fungal strain (Candida albicans cultured onto appropriate media. Based on the findings of this study, we report a new solvent-free process for the

  12. Solvent free microwave assisted preparation of new telechelic polymers based on poly(ethylene glycol

    Directory of Open Access Journals (Sweden)

    2009-07-01

    Full Text Available Poly(ethylene glycol bis (methylimidazolium chloride (PEGBMIM with average molecular weights of 600 and 1000 g/mol and poly(ethylene glycol bis (2-oxazoline (PEGBOX with average molecular weight of 600 g/mol have been prepared using microwave irradiation under solvent-free condition. The method described herein is a very good, safe, clean, economical and environmentally friendly alternative to the classical procedures. The resulted products have been characterized by common spectroscopic methods, such as FT-IR (Fourier transform infrared spectroscopy, 1H NMR (Nuclear magnetic resonance of proton and elemental analysis. Also, the effects of power levels and irradiation time on the yield of reactions and solubility of products have been studied.

  13. Microwave Synthesis Under Solvent-Free Conditions and Spectral Studies of Some Mesoporphyrinic Complexes

    Directory of Open Access Journals (Sweden)

    Rica Boscencu

    2012-05-01

    Full Text Available A series of A3B and A4 type mesoporphyrinic complexes were synthesized with superior yields using microwave irradiation under solvent-free conditions. The structures of the complexes were confirmed using elemental analysis, FT-IR, UV-Vis, EPR and NMR spectral data. The influence of environmental polarity on spectral properties of the mesoporphyrinic complexes was investigated. The obtained results indicate that the shape of absorption and fluorescence spectra does not depend on the solvent polarity under the experimental conditions used. The small shifts of the absorption and emission maximums that occur by increasing of solvent polarity reflects the physical interaction between the porphyrinic substituents and the solvent molecules.

  14. Solvent-free Oxidation of Alcohols and Mild Catalytic Deprotection of ...

    African Journals Online (AJOL)

    tetrabromobenzene- 1,3-disulphonamide (TBBDA) can be used for solvent-free oxidation of primary and secondary alcohols to the corresponding carbonyl compounds without over-oxidation, and efficient catalytic deprotection of various silyl ...

  15. Solvent-free Oxidation of Alcohols and Mild Catalytic Deprotection of ...

    African Journals Online (AJOL)

    NJD

    tetrabromobenzene-1,3-disulphonamide. (TBBDA) can be used for solvent-free oxidation of primary and secondary alcohols to the corresponding carbonyl compounds without over-oxidation, and efficient catalytic deprotection of various silyl ...

  16. Microwave-assisted silica-promoted solvent-free synthesis of ...

    Indian Academy of Sciences (India)

    assisted silica-promoted solvent-free synthesis ... Author Affiliations. G Krishnamurthy1 K V Jagannath1. Department of Studies in Chemistry, Central College Campus, Bangalore University, Dr. B R Ambedkar Veedhi, Bengalore 560 001, India ...

  17. Multicomponent One-Pot Synthesis of Substituted Hantzsch Thiazole Derivatives Under Solvent Free Conditions

    Directory of Open Access Journals (Sweden)

    Bhaskar S. Dawane

    2009-01-01

    Full Text Available Thiazole derivatives were prepared by one-pot procedure by the reaction of α-haloketones, thiourea and substituted o-hydroxybenzaldehyde under environmentally solvent free conditions.

  18. Solvent Free Preparation of p-Cymene from Limonene Using Vietnamese Montmorillonite

    DEFF Research Database (Denmark)

    Nguyen, Thao-Tran Thi; Duus, Fritz; Le, Thach Ngoc

    2013-01-01

    p-Cymene, an important intermediate in industrial chemistry, has been prepared in good yields by thermally induced dehydrogenation of limonene under solvent-free reaction conditions using Vietnamese montmorillonite as an efficient green catalyst.......p-Cymene, an important intermediate in industrial chemistry, has been prepared in good yields by thermally induced dehydrogenation of limonene under solvent-free reaction conditions using Vietnamese montmorillonite as an efficient green catalyst....

  19. Solvent-free synthesis, spectral correlations and antimicrobial activities of some aryl E 2-propen-1-ones

    Science.gov (United States)

    Sathiyamoorthi, K.; Mala, V.; Sakthinathan, S. P.; Kamalakkannan, D.; Suresh, R.; Vanangamudi, G.; Thirunarayanan, G.

    2013-08-01

    Totally 38 aryl E 2-propen-1-ones including nine substituted styryl 4-iodophenyl ketones have been synthesised using solvent-free SiO2-H3PO4 catalyzed Aldol condensation between respective methyl ketones and substituted benzaldehydes under microwave irradiation. The yields of the ketones are more than 80%. The synthesised chalcones were characterized by their analytical, physical and spectroscopic data. The spectral frequencies of synthesised substituted styryl 4-iodophenyl ketones have been correlated with Hammett substituent constants, F and R parameters using single and multi-linear regression analysis. The antimicrobial activities of 4-iodophenyl chalcones have been studied using Bauer-Kirby method.

  20. The extraction of essential oil from patchouli leaves (Pogostemon cablin Benth) using microwave hydrodistillation and solvent-free microwave extraction methods

    Science.gov (United States)

    Y Putri, D. K.; Kusuma, H. S.; E Syahputra, M.; Parasandi, D.; Mahfud, M.

    2017-12-01

    Patchouli plant (Pogostemon cablin Benth) is one of the important essential oil-producing plant, contributes more than 50% of total exports of Indonesia’s essential oil. However, the extraction of patchouli oil that has been done in Indonesia is generally still used conventional methods that require enormous amount of energy, high solvent usage, and long time of extraction. Therefore, in this study, patchouli oil extraction was carried out by using microwave hydrodistillation and solvent-free microwave extraction methods. Based on this research, it is known that the extraction of patchouli oil using microwave hydrodistillation method with longer extraction time (240 min) only produced patchouli oil’s yield 1.2 times greater than solvent-free microwave extraction method which require faster extraction time (120 min). Otherwise the analysis of electric consumption and the environmental impact, the solvent-free microwave extraction method showed a smaller amount when compared with microwave hydrodistillation method. It is conclude that the use of solvent-free microwave extraction method for patchouli oil extraction is suitably method as a new green technique.

  1. Marginal Microleakage and Morphological Characteristics of a Solvent-Free One-Step Self-Etch Adhesive (B1SF)

    Science.gov (United States)

    Khoroushi, Maryam; Shirban, Farinaz; Shirban, Mohammadreza

    2013-01-01

    Objective: In recent years, newly developed solvent-free dental adhesives have been introduced. The aim of this study was to evaluate the marginal integrity of a new one-step solvent-free self-etch adhesive and to compare it with a commonly used two-step self-etch adhesive as the gold standard. Materials and Methods: Class V cavities (2×4×1.5 mm) were prepared on the buccal aspects of 28 human premolars. The cervical margins of the cavity preparations were placed 1 mm apical to the CEJ. Clearfil SE Bond (CSEB) (two-step self-etch adhesive) and Bond 1SF (B1SF) (one-step self-etch adhesive) were applied to the cavities in groups 1 and 2 (n=14), respectively. Then, the specimens were restored with A2 shade of APX composite resin. Each group was evaluated for dye penetration under a stereomicroscope at ×32 after 24 hours and 500 rounds of thermocycling. Statistical analyses were carried out using Mann Whitney test (α=0.05). In addition, in each experimental group, two specimens were prepared for analysis under SEM. Results: There were no significant differences in enamel margin microleakage between the two adhesives used (P=0.24(; whereas, there were significant differences in dentin margin microleakage between CSEB and B1SF (P=0.004). Dentin microleakage of B1SF was higher than that of CSEB. Conclusion: Results showed that the enamel marginal integrity of B1SF as a newly developed one-step solvent-free self-etch adhesive was similar to that of CSEB as a commonly used two-step self-etch; however, dentinal sealing of CSEB was better than that of B1SF. PMID:23724201

  2. Solvent-free method for the determination of lignin-derived phenols in sediments.

    Science.gov (United States)

    Pinto, Mayara; Frena, Morgana; Dos Santos Madureira, Luiz Augusto

    2017-05-01

    A solvent-free method that uses headspace solid-phase microextraction and gas chromatography with flame ionization detection is proposed for the determination of lignin-derived phenols in sediments. The extraction and derivatization conditions for the simultaneous analysis of acetosyringone, acetovanillone, syringaldehyde, vanillin, ferulic acid, syringic acid, vanillic acid, p-hydroxybenzoic acid, and p-coumaric acid were optimized using a central composite design. After optimization, the best results were obtained with the following conditions: exposure of the polyacrylate fiber to the headspace with 60 μL of N,O-bis(trimethylsilyl)trifluoroacetamide as a derivatizing agent for 15 min and then extraction in the headspace of 100 mg of sediment (previously spiked with lignin-derived phenols) for 35 min. The accuracy of the method was estimated based on recovery tests at two concentration levels and by comparison with a high-performance liquid chromatography method reported in the literature. Based on the t-test with a confidence level of 95%, no statistical differences were observed. The detection and quantification limits for the target compounds varied according to their characteristics: values at the microgram per gram level for nonacid compounds and milligram per gram level for phenolic acids, due to the lower volatility of the derivatives. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Surface functionalization of SBA-15 by the solvent-free method

    International Nuclear Information System (INIS)

    Wang Yimeng; Zheng Yingwu; Zhu Jianhua

    2004-01-01

    A solvent-free technique was employed for fast modification of mesoporous materials. Copper, chromium and iron oxide species could be highly dispersed in SBA-15 by manually grinding the corresponding precursor salts and the host, followed by calcinations for the first time. This method is more effective to spontaneously disperse oxide species onto SBA-15 than impregnation, probably forming monolayer or submonolayer dispersion of salts or oxides. Besides, Cr(VI) species dominate in the mixing sample while Cr(III) species dominate in the impregnation one. In the temperature programmed surface reaction of nitrosamines, the sample prepared by solvent-free method showed a higher catalytic activity than the impregnation one

  4. Solvent-free synthesis of azomethines, spectral correlations and ...

    African Journals Online (AJOL)

    These spectral data have been correlated with Hammett substituent constants and F and R parameters using single and multi-linear regression analysis. From the results of statistical analysis, the effect of substituents on the above spectral data has been studied. The antimicrobial activities of all imines have been studied ...

  5. Physicochemical characterization of a navy bean (Phaseolus vulgaris) protein fraction produced using a solvent-free method.

    Science.gov (United States)

    Jafari, Mousa; Rajabzadeh, Amin Reza; Tabtabaei, Solmaz; Marsolais, Frédéric; Legge, Raymond L

    2016-10-01

    A solvent-free electrostatic separation method was employed to separate navy bean flour (NBF) into protein-rich (PR) and starch-rich (SR) fractions. The physicochemical properties of NBF and separated fractions were compared to proteins (navy bean isolate (NBI) and 7S globulin) prepared using a wet process. Gel electrophoresis confirmed that the protein distribution in the isolated fractions was similar to that of NBF. The protein profile of NBI and 7S globulin was found to be devoid of certain proteins that were found in the NBF and PR fraction. Amino acid analysis revealed that the NBI and 7S globulin had a lower content of sulfur-containing amino acids compared to NBF and the electrostatically isolated fractions. CD and fluorescence spectroscopy confirmed that denaturation of the proteins during the acid precipitation is likely. This novel solvent-free electrostatic separation process preserves the native protein structure found in NBF and improves the recovery of some of the smaller MW proteins. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. A Solvent-Free Base Liberation of a Tertiary Aminoalkyl Halide by Flow Chemistry

    DEFF Research Database (Denmark)

    Pedersen, Michael Jønch; Skovby, Tommy; Mealy, Michael J.

    2016-01-01

    A flow setup for base liberation of 3-(N,N-dimethylamino)propyl chloride hydrochloride and solvent-free separation of the resulting free base has been developed. Production in flow profits from an on-demand approach, useful for labile aminoalkyl halides. The requirement for obtaining a dry product...

  7. A Highly Efficient Solvent-Free Acetalization of Aldehydes to 1,1 ...

    African Journals Online (AJOL)

    NICO

    1,1-Diacetates, sulfonic acid functionalized silica, acetalization, solvent-free reaction, SiO2-Pr-SO3H. 1. Introduction. Protection of aldehydes is a frequently used and important method in organic chemistry. Many procedures have been developed for this aim. For the acetalization of carbonyl groups, acetic anhydride can be ...

  8. Solvent-free microwave extraction of essential oil from Melaleuca leucadendra L.

    Directory of Open Access Journals (Sweden)

    Widya Ismanto Aviarina

    2018-01-01

    Full Text Available Cajuput (Melaleuca leucadendra L. oil is one of potential commodity that provides an important role for the country’s foreign exchange but the extraction of these essential oil is still using conventional method such as hydrodistillation which takes a long time to produce essential oil with good quality. Therefore it is necessary to optimize the extraction process using a more effective and efficient method. So in this study the extraction is done using solvent-free microwave extraction method that are considered more effective and efficient than conventional methods. The optimum yield in the extraction of cajuput oil using solvent-free microwave extraction method is 1.0674%. The optimum yield is obtained on the feed to distiller (F/D ratio of 0.12 g/mL with microwave power of 400 W. In the extraction of cajuput oil using solvent-free microwave extraction method is performed first-order and second-order kinetics modelling. Based on kinetics modelling that has been done, it can be said that the second-order kinetic model (R2 = 0.9901 can be better represent experimental results of extraction of cajuput oil that using solvent-free microwave extraction method when compared with the first-order kinetic model (R2 = 0.9854.

  9. An Environmentally Friendly Solvent-free Synthesis of 3,4 ...

    African Journals Online (AJOL)

    NICO

    An Environmentally Friendly Solvent-free Synthesis of. 3,4-Dihydropyrimidinones using a p-Aminobenzene. Sulfonic Acid Catalyzed Biginelli Reaction. Ming Shu Wu,a,b,* Ping Heb and Xiang Zhu Zhanga. aDepartment of Chemical Engineering, Institute of Anyang Technology, Anyang, 455000, Henan, P.R. China.

  10. A Highly Efficient Solvent-Free Acetalization of Aldehydes to 1,1 ...

    African Journals Online (AJOL)

    1,1-Diacetates are prepared in excellent yields from aldehydes and acetic anhydride under solvent-free conditions at room temperature in short reaction times using catalytic amount of sulfonic acid functionalized silica (SiO2-Pr-SO3H) which could be easily handled and removed from the mixture of reaction. Keywords: 1 ...

  11. Preparation of Ultra-fine Calcium Carbonate by a Solvent-free ...

    African Journals Online (AJOL)

    The treatment of calcium chloride with sodium carbonate under solvent-free conditions with a supersonic airflow and at a low heating temperature leads to the synthesis of ultra-fine calcium carbonate. The reaction not only involves mild conditions, a simple operation, and high yields but also gives a high conversion rate.

  12. An Environmentally Friendly Solvent-free Synthesis of 3,4 ...

    African Journals Online (AJOL)

    Anhydrous p-aminobenzene sulphonic acid mediated solvent-free protocol is described for the synthesis of dihydropyrimidinones by the cyclocondensation of aldehydes, β-ketoesters and urea/thiourea. Yields obtained are significantly higher than those obtained utilizing classical Biginelli reaction conditions. Keywords: ...

  13. Solvent-free synthesis of nanosized hierarchical sodalite zeolite with a multi-hollow polycrystalline structure

    KAUST Repository

    Zeng, Shangjing

    2016-08-03

    A solvent-free route is developed for preparing nanoscale sodalite zeolite with a multi-hollow structure. Furthermore, the synthesis of nanosized hollow sodalite polycrystalline aggregates with a mesoporous structure and high crystallinity is investigated by adding an organosilane surfactant as a mesopore-generating agent.

  14. Solvent-Free Wittig Reaction: A Green Organic Chemistry Laboratory Experiment

    Science.gov (United States)

    Leung, Sam H.; Angel, Stephen A.

    2004-01-01

    Some Wittig reactions can be carried out by grinding the reactants in a mortar with a pestle for about 20 minutes, as per investigation. A laboratory experiment involving a solvent-free Wittig reaction that can be completed in a three-hour sophomore organic chemistry laboratory class period, are developed.

  15. Microwave-assisted silica-promoted solvent-free synthesis of ...

    Indian Academy of Sciences (India)

    Vol. 125, No. 4, July 2013, pp. 807–811. c Indian Academy of Sciences. Microwave-assisted silica-promoted solvent-free synthesis of triazoloquinazolinone and benzimidazoquinazolinones. G KRISHNAMURTHY. ∗ and K V JAGANNATH. Department of Studies in Chemistry, Central College Campus, Bangalore University,.

  16. Solvent-free porous framework resulted from 3D entanglement of 1D zigzag coordination polymer

    KAUST Repository

    Kole, Goutam Kumar Umar

    2010-01-01

    A solvent-free porous metal organic framework is constructed by the 3D entanglement of 1D zigzag coordination polymeric chains. The role of solvents and the effect of reaction conditions on such unique entanglement are addressed. © 2010 The Royal Society of Chemistry and the Centre National de la Recherche Scientifique.

  17. Structure of Solvent-Free Nanoparticle−Organic Hybrid Materials

    KAUST Repository

    Yu, Hsiu-Yu

    2010-11-16

    We derive the radial distribution function and the static structure factor for the particles in model nanoparticleorganic hybrid materials composed of nanoparticles and attached oligomeric chains in the absence of an intervening solvent. The assumption that the oligomers form an incompressible fluid of bead-chains attached to the particles that is at equilibrium for a given particle configuration allows us to apply a density functional theory for determining the equilibrium configuration of oligomers as well as the distribution function of the particles. A quasi-analytic solution is facilitated by a regular perturbation analysis valid when the oligomer radius of gyration R g is much greater than the particle radius a. The results show that the constraint that each particle carries its own share of the fluid attached to itself yields a static structure factor that approaches zero as the wavenumber approaches zero. This result indicates that each particle excludes exactly one other particle from its neighborhood. © 2010 American Chemical Society.

  18. Mechanocatalytic Solvent-Free Esterification of Sugarcane Bagasse

    Directory of Open Access Journals (Sweden)

    Qiang Zhang

    2018-03-01

    Full Text Available Esterification is a versatile way to produce the derivatives of lignocellulose with developed properties. However, the traditional heterogeneous esterification of lignocellulose suffered from the drawbacks of low efficiency, additional reaction medium and heating. In the present study, an efficient method was developed to produce the functionalized sugarcane bagasse (SCB by ball milling without any additional solvents and heating. The effects of pulverization time, rotation speed, the kind of linear chain anhydrides, the ratio of anhydrides to SCB, with or without pyridine catalyst and the dosage of catalyst were investigated on weight percent gain (WPG of SCB esters. The results indicated that the high efficiency of this mechanocatalystic esterification was probably due to the destroyed crystalline structure and the promoted penetration of the esterifying reagent onto SCB bulk caused by ball milling. The maximum WPG of SCB acetate, propionate and butyrate reached 33.3%, 33.6% and 32.4%, respectively. The physicochemical structure of the esterified SCB was characterized with Fourier transform infrared spectra (FT-IR, solid state cross-polarized magic angle spinning 13C nuclear magnetic resonance (CP/MAS 13C-NMR, X-ray diffraction (XRD, scanning electron microscopy (SEM and thermogravimetric analysis (TGA. The direct evidence of the esterification occurrence was provided with FT-IR and solid-state CP/MAS 13C-NMR. The thermal stability of SCB increased upon the mechanocatalytic esterification. The results implied that the relatively homogeneous modification was achieved with this semi-homogeneous esterification method by ball milling.

  19. Solvent-free synthesis of azomethines, spectral correlations and antimicrobial activities of some E-benzylidene-4-chlorobenzenamines

    Directory of Open Access Journals (Sweden)

    R. Suresh

    2015-07-01

    Full Text Available Some azomethines including substituted benzylidene-4-chlorobenzenamines (E-imines have been synthesized by fly-ash: PTS catalyzed microwave assisted condensation of 4-chloroaniline and substituted benzaldehydes under solvent-free conditions. The yield of the imines has been found to be more than 85%. The purity of all imines has been checked using their physical constants and UV, IR and NMR spectral data. These spectral data have been correlated with Hammett substituent constants and F and R parameters using single and multi-linear regression analysis. From the results of statistical analysis, the effect of substituents on the above spectral data has been studied. The antimicrobial activities of all imines have been studied using standard methods.

  20. Solvent-Free Production of Bioflavors by Enzymatic Esterification of Citronella (Cymbopogon winterianus) Essential Oil.

    Science.gov (United States)

    Paroul, Natália; Grzegozeski, Luana Paula; Chiaradia, Viviane; Treichel, Helen; Cansian, Rogério L; Oliveira, J Vladimir; de Oliveira, Débora

    2012-01-01

    Enzymatic esterification of citronella essential oil towards the production of geranyl and citronellyl esters may present great scientific and technological interest due to the well-known drawbacks of the chemical-catalyzed route. In this context, this work reports the maximization of geranyl and citronellyl esters production by esterification of oleic and propionic acids in a solvent-free system using a commercial immobilized lipase as catalyst. Results of the reactions showed that the strategy adopted for the experimental design proved to be useful in evaluating the effects of the studied variables on the reaction conversion using Novozym 435 as catalyst. The operating conditions that maximized the production of each ester were determined, leading, in a general way, to conversions of about 90% for all systems. New experimental data on enzymatic esterification of crude citronella essential oil for geranyl and citronellyl esters production in solvent-free system are reported in this work.

  1. Lipase-catalysed ester synthesis in solvent-free oil system: is it esterification or transesterification?

    Science.gov (United States)

    Sun, Jingcan; Yu, Bin; Curran, Philip; Liu, Shao-Quan

    2013-12-01

    Ester synthesis was carried out in a solvent-free system of lipase, coconut oil and ethanol or fusel alcohols to ascertain the reaction mechanism. During ester formation, octanoic and decanoic acids increased initially and then decreased gradually, indicating that ester production was a two-step reaction consisting of hydrolysis and esterification, rather than alcoholysis. With ethanol as the alcohol substrate, added butyric acid inhibited ester synthesis. However, when fusel alcohols were used as the alcohol substrate, no significant inhibitory effect by butyric acid was observed. Added octanoic acid did not show any adverse effect on the synthesis of corresponding esters. The results suggest that polarity of the reactants determines lipase activity. This study provides the first evidence on the mechanism of immobilised lipase-catalysed ester synthesis in a solvent-free system involving both hydrolysis and esterification. Copyright © 2013 Elsevier Ltd. All rights reserved.

  2. Solvent-Free Toner Printing of Organic Semiconductor Layer in Flexible Thin-Film Transistors

    Science.gov (United States)

    Sakai, Masatoshi; Koh, Tokuyuki; Toyoshima, Kenji; Nakamori, Kouta; Okada, Yugo; Yamauchi, Hiroshi; Sadamitsu, Yuichi; Shinamura, Shoji; Kudo, Kazuhiro

    2017-07-01

    A solvent-free printing process for printed electronics is successfully developed using toner-type patterning of organic semiconductor toner particles and the subsequent thin-film formation. These processes use the same principle as that used for laser printing. The organic thin-film transistors are prepared by electrically distributing the charged toner onto a Au electrode on a substrate film, followed by thermal lamination. The thermal lamination is effective for obtaining an oriented and crystalline thin film. Toner printing is environmentally friendly compared with other printing technologies because it is solvent free, saves materials, and enables easy recycling. In addition, this technology simultaneously enables both wide-area and high-resolution printing.

  3. Predicting the Disorder–Order Transition of Solvent-Free Nanoparticle–Organic Hybrid Materials

    KAUST Repository

    Yu, Hsiu-Yu

    2013-07-02

    The transition from a disordered to a face-centered-cubic phase in solvent-free oligomer-tethered nanoparticles is predicted using a density-functional theory for model hard spheres with tethered bead-spring oligomers. The transition occurs without a difference of volume fraction for the two phases, and the phase boundary is influenced by the loss of oligomer configurational entropy relative to an ideal random system in one phase compared with the other. When the particles are localized in the ordered phase, the cooperation of the oligomers in filling the space is hindered. Therefore, shorter oligomers feel a stronger entropic penalty in the ordered solid and favor the disordered phase. Strikingly, we found that the solvent-free system has a later transition than hard spheres for all investigated ratios of oligomer radius of gyration to particle radius. © 2013 American Chemical Society.

  4. Solvent-free preparation of co-crystals of phenazine and acridine with vanillin

    Energy Technology Data Exchange (ETDEWEB)

    Braga, Dario, E-mail: dario.braga@unibo.it [Dipartimento di Chimica ' G.Ciamician' , Universita degli studi di Bologna, Via Selmi 2, 40126 Bologna (Italy); Grepioni, Fabrizia; Maini, Lucia; Mazzeo, Paolo P.; Rubini, Katia [Dipartimento di Chimica ' G.Ciamician' , Universita degli studi di Bologna, Via Selmi 2, 40126 Bologna (Italy)

    2010-08-10

    Co-crystals of phenazine and acridine with vanillin have been obtained by solvent-free reaction or thermal treatment of the solid reactants: their structures, thermal behaviour and eutectic formation have been investigated via single crystal X-ray diffraction, differential scanning calorimetry (DSC), variable temperature X-ray powder diffraction and hot-stage microscopy (HSM). Polymorph screening of the reagents has also been carried out.

  5. Solvent-free preparation of co-crystals of phenazine and acridine with vanillin

    International Nuclear Information System (INIS)

    Braga, Dario; Grepioni, Fabrizia; Maini, Lucia; Mazzeo, Paolo P.; Rubini, Katia

    2010-01-01

    Co-crystals of phenazine and acridine with vanillin have been obtained by solvent-free reaction or thermal treatment of the solid reactants: their structures, thermal behaviour and eutectic formation have been investigated via single crystal X-ray diffraction, differential scanning calorimetry (DSC), variable temperature X-ray powder diffraction and hot-stage microscopy (HSM). Polymorph screening of the reagents has also been carried out.

  6. An Efficient, Mild and Solvent-Free Synthesis of Benzene Ring Acylated Harmalines

    Directory of Open Access Journals (Sweden)

    Sabira Begum

    2009-12-01

    Full Text Available A facile synthesis of a series of benzene ring acylated analogues of harmaline has been achieved by Friedel-Crafts acylation under solvent-free conditions at room temperature using acyl halides/acid anhydrides and AlCl3. The reaction afforded 10- and 12-acyl analogues of harmaline in good yield, along with minor quantities of N-acyl-tryptamines and 8-acyl analogues of N-acyltryptamines.

  7. Solvent-Free Synthesis of Flavour Esters through Immobilized Lipase Mediated Transesterification

    OpenAIRE

    Garlapati, Vijay Kumar; Banerjee, Rintu

    2013-01-01

    The synthesis of methyl butyrate and octyl acetate through immobilized Rhizopus oryzae NRRL 3562 lipase mediated transesterification was studied under solvent-free conditions. The effect of different transesterification variables, namely, molarity of alcohol, reaction time, temperature, agitation, addition of water, and enzyme amount on molar conversion (%) was investigated. A maximum molar conversion of 70.42% and 92.35% was obtained in a reaction time of 14 and 12 h with the transesterifica...

  8. Solvent-free, visible-light photocatalytic alcohol oxidations applying an organic photocatalyst

    Directory of Open Access Journals (Sweden)

    Martin Obst

    2016-11-01

    Full Text Available A method for the solvent-free photocatalytic conversion of solid and liquid substrates was developed, using a novel rod mill apparatus. In this setup, thin liquid films are realized which is crucial for an effective photocatalytic conversion due to the low penetration depth of light in heterogeneous systems. Several benzylic alcohols were oxidized with riboflavin tetraacetate as photocatalyst under blue light irradiation of the reaction mixture. The corresponding carbonyl compounds were obtained in moderate to good yields.

  9. Solvent-free microwave extraction of essential oil from Melaleuca leucadendra L.

    OpenAIRE

    Widya Ismanto Aviarina; Septya Kusuma Heri; Mahfud Mahfud

    2018-01-01

    Cajuput (Melaleuca leucadendra L.) oil is one of potential commodity that provides an important role for the country’s foreign exchange but the extraction of these essential oil is still using conventional method such as hydrodistillation which takes a long time to produce essential oil with good quality. Therefore it is necessary to optimize the extraction process using a more effective and efficient method. So in this study the extraction is done using solvent-free microwave extraction meth...

  10. Solvent-free, visible-light photocatalytic alcohol oxidations applying an organic photocatalyst

    OpenAIRE

    Obst, Martin; K?nig, Burkhard

    2016-01-01

    A method for the solvent-free photocatalytic conversion of solid and liquid substrates was developed, using a novel rod mill apparatus. In this setup, thin liquid films are realized which is crucial for an effective photocatalytic conversion due to the low penetration depth of light in heterogeneous systems. Several benzylic alcohols were oxidized with riboflavin tetraacetate as photocatalyst under blue light irradiation of the reaction mixture. The corresponding carbonyl compounds were obtai...

  11. Metallocene catalyzed synthesis of fungistatic vicinal aminoalcohols under solvent free conditions.

    Science.gov (United States)

    Mancilla, Gabriela; Durán-Patrón, Rosa M; Macías-Sánchez, Antonio J; Collado, Isidro G

    2010-11-15

    Group 4 and 5 metallocenes, Cp(2)TiCl(2), Cp(2)ZrCl(2) and Cp(2)VCl(2), have been evaluated as catalyst in the solvent free, room temperature, preparation of vicinal aminoalcohols. The regioselectivity of the reaction and the fungistatic activity of the prepared compounds against Botrytis cinerea and Colletotrichum gloeosporioides are discussed. Copyright © 2010 Elsevier Ltd. All rights reserved.

  12. Solvent-free liquid crystals and liquids based on genetically engineered supercharged polypeptides with high elasticity.

    Science.gov (United States)

    Liu, Kai; Pesce, Diego; Ma, Chao; Tuchband, Michael; Shuai, Min; Chen, Dong; Su, Juanjuan; Liu, Qing; Gerasimov, Jennifer Y; Kolbe, Anke; Zajaczkowski, Wojciech; Pisula, Wojciech; Müllen, Klaus; Clark, Noel A; Herrmann, Andreas

    2015-04-17

    A series of solvent-free elastin-like polypeptide liquid crystals and liquids are developed by electrostatic complexation of supercharged elastin-like polypeptides with surfactants. The smectic mesophases exhibit a high elasticity and the values can be easily tuned by varying the alkyl chain lengths of the surfactants or the lengths of the elastin-like polypeptides. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Solvent-free functionalization of fullerene C{sub 60} and pristine multi-walled carbon nanotubes with aromatic amines

    Energy Technology Data Exchange (ETDEWEB)

    Ramírez-Calera, Itzel J. [Centro de Ciencias Aplicadas y Desarrollo Tecnológico, Universidad Nacional Autónoma de México, Circuito Exterior C. U., 04510, México, D.F. (Mexico); Meza-Laguna, Victor [Instituto de Ciencias Nucleares, Universidad Nacional Autónoma de México, Circuito Exterior C. U., 04510 México, D.F. (Mexico); Gromovoy, Taras Yu. [O.O. Chuiko Institute of Surface Chemistry, National Academy of Sciences of the Ukraine, Gen. Naumova 17, 03164 Kiev (Ukraine); Chávez-Uribe, Ma. Isabel [Instituto de Química, Universidad Nacional Autónoma de México, Circuito Exterior C. U., 04510 México, D.F. (Mexico); Basiuk, Vladimir A., E-mail: basiuk@nucleares.unam.mx [Instituto de Ciencias Nucleares, Universidad Nacional Autónoma de México, Circuito Exterior C. U., 04510 México, D.F. (Mexico); Basiuk, Elena V., E-mail: elbg1111@gmail.com [Centro de Ciencias Aplicadas y Desarrollo Tecnológico, Universidad Nacional Autónoma de México, Circuito Exterior C. U., 04510, México, D.F. (Mexico)

    2015-02-15

    Highlights: • Pristine multi-walled carbon nanotubes were functionalized with aromatic amines. • The amines add onto nanotube defects, likewise they add onto fullerene C{sub 60}. • The addition takes place at elevated temperature and without organic solvents. • Functionalized nanotubes were characterized by a number of instrumental techniques. - Abstract: We employed a direct one-step solvent-free covalent functionalization of solid fullerene C{sub 60} and pristine multi-walled carbon nanotubes (MWCNTs) with aromatic amines 1-aminopyrene (AP), 2-aminofluorene (AF) and 1,5-diaminonaphthalene (DAN). The reactions were carried out under moderate vacuum, in a wide temperature range of 180–250 °C, during relatively short time of about 2 h. To confirm successful amine attachment, a large number of analytical techniques were used (depending on the nanomaterial functionalized) such as Fourier transform infrared, Raman, X-ray photoelectron, {sup 13}C cross-polarization magic angle spinning NMR spectroscopy, thermogravimetric analysis, laser-desorption ionization time-of-flight mass spectrometry, temperature-programmed desorption with mass spectrometric detection, as well as scanning and transmission electron microscopy. The nucleophilic addition of the aromatic amines to C{sub 60} molecule was studied theoretically by using density functional theory (PBE GGA functional with Grimme dispersion correction in conjunction with the DNP basis set). In the case of crystalline C{sub 60}, the solvent-free technique has a limited applicability due to poor diffusion of vaporous aromatic amines into the bulk. Nevertheless, the approach proposed allows for a facile preparation of aromatic amine-functionalized pristine MWCNTs without contamination with other chemical reagents, detergents and solvents, which is especially important for a vast variety of nanotube applications spanning from nanoelectronics to nanomedicine.

  14. Liquefaction of Biopolymers: Solvent-free Liquids and Liquid Crystals from Nucleic Acids and Proteins.

    Science.gov (United States)

    Liu, Kai; Ma, Chao; Göstl, Robert; Zhang, Lei; Herrmann, Andreas

    2017-05-16

    Biomacromolecules, such as nucleic acids, proteins, and virus particles, are persistent molecular entities with dimensions that exceed the range of their intermolecular forces hence undergoing degradation by thermally induced bond-scission upon heating. Consequently, for this type of molecule, the absence of a liquid phase can be regarded as a general phenomenon. However, certain advantageous properties usually associated with the liquid state of matter, such as processability, flowability, or molecular mobility, are highly sought-after features for biomacromolecules in a solvent-free environment. Here, we provide an overview over the design principles and synthetic pathways to obtain solvent-free liquids of biomacromolecular architectures approaching the topic from our own perspective of research. We will highlight the milestones in synthesis, including a recently developed general surfactant complexation method applicable to a large variety of biomacromolecules as well as other synthetic principles granting access to electrostatically complexed proteins and DNA. These synthetic pathways retain the function and structure of the biomacromolecules even under extreme, nonphysiological conditions at high temperatures in water-free melts challenging the existing paradigm on the role of hydration in structural biology. Under these conditions, the resulting complexes reveal their true potential for previously unthinkable applications. Moreover, these protocols open a pathway toward the assembly of anisotropic architectures, enabling the formation of solvent-free biomacromolecular thermotropic liquid crystals. These ordered biomaterials exhibit vastly different mechanical properties when compared to the individual building blocks. Beyond the preparative aspects, we will shine light on the unique potential applications and technologies resulting from solvent-free biomacromolecular fluids: From charge transport in dehydrated liquids to DNA electrochromism to biocatalysis in

  15. Silica Gel-Mediated Organic Reactions under Organic Solvent-Free Conditions

    Directory of Open Access Journals (Sweden)

    Satoaki Onitsuka

    2012-09-01

    Full Text Available Silica gel was found to be an excellent medium for some useful organic transformations under organic solvent-free conditions, such as (1 the Friedel-Crafts-type nitration of arenes using commercial aqueous 69% nitric acid alone at room temperature, (2 one-pot Wittig-type olefination of aldehydes with activated organic halides in the presence of tributyl- or triphenylphosphine and Hunig’s base, and (3 the Morita-Baylis-Hillman reaction of aldehydes with methyl acrylate. After the reactions, the desired products were easily obtained in good to excellent yields through simple manipulation.

  16. Solvent-free fabrication of thermally conductive insulating epoxy composites with boron nitride nanoplatelets as fillers.

    Science.gov (United States)

    Wang, Zifeng; Fu, Yuqiao; Meng, Wenjun; Zhi, Chunyi

    2014-01-01

    A solvent-free method for the fabrication of thermally conductive epoxy-boron nitride (BN) nanoplatelet composite material is developed in this study. By this method, polymer composites with nearly any filler fractions can be easily fabricated. The maximum thermal conductivity reaches 5.24 W/mK, which is 1,600% improvement in comparison with that of pristine epoxy material. In addition, the as-fabricated samples exhibit excellent overall performances with great mechanical property and thermal stability well preserved.

  17. Solvent free one pot synthesis of amidoalkyl naphthols over phosphotungstic acid

    Directory of Open Access Journals (Sweden)

    Divya P. Narayanan

    2017-07-01

    Full Text Available Montmorillonite KSF clay was effectively modified by the encapsulation of phosphotungstic acid into the clay layers via sonication followed by incipient wet impregnation method. The prepared catalysts were characterized by X-ray diffraction (XRD, Fourier-transform infrared spectroscopy (FTIR and scanning electron microscopy (SEM techniques. The catalytic activities of the prepared systems were investigated in the solvent free synthesis of amidoalkyl naphthols by the multicomponent one-pot condensation of an aldehyde, β-naphthol and an amide or urea. Excellent yield, shorter reaction time, easy work-up, and reusability of the catalyst are the main attractions of this green procedure.

  18. Indium(III)-catalyzed synthesis of N-substituted pyrroles under solvent-free conditions

    OpenAIRE

    Chen, Jiu-Xi; Liu, Miao-Chang; Yang, Xiao-Liang; Ding, Jin-Chang; Wu, Hua-Yue

    2008-01-01

    A variety of N-substituted pyrroles have been synthesized by reacting γ-diketones (R¹C(O)CH2CH2C(O)R²: R¹, R² = Me, Ph) with amines (RNH2: R=Alkyl, Aryl, TsNH) or diamines (1,6-diaminohexane and 1,2-diaminoethane) in the presence of indium tribromide, indium trichloride or indium trifluoromethanesulfonate at room temperature under solvent-free conditions. The experiment protocol features simple operations, and the products are isolated in high to excellent yields (81-98%). Vários pirróis N...

  19. Tuning of Activated Carbon for Solvent-Free Oxidation of Cyclohexane

    Directory of Open Access Journals (Sweden)

    Mohammad Sadiq

    2017-01-01

    Full Text Available Activated carbon (AC was prepared from carbonization of phosphoric acid soaked peanut shell at 380°C under inert atmosphere followed by activation with hydrogen peroxide. The AC was characterized by SEM, EDX, FTIR, TGA, and BET surface area and pore size analyzer. The potential of AC as a catalyst for solvent-free oxidation of cyclohexane to cyclohexanol and cyclohexanone (the mixture is known as KA oil in the presence of molecular oxygen at moderate temperature was investigated in a self-designed double-walled three-necked batch reactor. The effect of different reaction parameters/additive was optimized. The maximum productivity value (2.14 mmolg−1 h−1, without base, and 4.85 mmolg−1 h−1, with 0.2 mmol NaOH of the desired product was achieved under optimal reaction parameters: vol 12.5 mL, cat 0.4 g, time 14 h, oxygen flow 40 mL/min (pO2 760 Torr, stirring 1100 rpm, and temp 75°C. The AC shows recyclability for multiple runs without any significant loss in activity. Thus, the AC can be an efficient catalyst, due to low cost, ease of synthesis, easy recovery, nonleaching, and recyclability for multiple uses for the solvent-free oxidation of cyclohexane.

  20. Solvent-Free Synthesis of Flavour Esters through Immobilized Lipase Mediated Transesterification

    Directory of Open Access Journals (Sweden)

    Vijay Kumar Garlapati

    2013-01-01

    Full Text Available The synthesis of methyl butyrate and octyl acetate through immobilized Rhizopus oryzae NRRL 3562 lipase mediated transesterification was studied under solvent-free conditions. The effect of different transesterification variables, namely, molarity of alcohol, reaction time, temperature, agitation, addition of water, and enzyme amount on molar conversion (% was investigated. A maximum molar conversion of 70.42% and 92.35% was obtained in a reaction time of 14 and 12 h with the transesterification variables of 0.6 M methanol in vinyl butyrate and 2 M octanol in vinyl acetate using 80 U and 60 U immobilized lipase with the agitation speed of 200 rpm and 0.2% water addition at 32°C and 36°C for methyl butyrate and octyl acetate, respectively. The immobilized enzyme has retained good relative activity (more than 95% up to five and six recycles for methyl butyrate and octyl acetate, respectively. Hence, the present investigation makes a great impingement in natural flavour industry by introducing products synthesized under solvent-free conditions to the flavour market.

  1. Solvent-Free Synthesis of Flavour Esters through Immobilized Lipase Mediated Transesterification

    Science.gov (United States)

    Banerjee, Rintu

    2013-01-01

    The synthesis of methyl butyrate and octyl acetate through immobilized Rhizopus oryzae NRRL 3562 lipase mediated transesterification was studied under solvent-free conditions. The effect of different transesterification variables, namely, molarity of alcohol, reaction time, temperature, agitation, addition of water, and enzyme amount on molar conversion (%) was investigated. A maximum molar conversion of 70.42% and 92.35% was obtained in a reaction time of 14 and 12 h with the transesterification variables of 0.6 M methanol in vinyl butyrate and 2 M octanol in vinyl acetate using 80 U and 60 U immobilized lipase with the agitation speed of 200 rpm and 0.2% water addition at 32°C and 36°C for methyl butyrate and octyl acetate, respectively. The immobilized enzyme has retained good relative activity (more than 95%) up to five and six recycles for methyl butyrate and octyl acetate, respectively. Hence, the present investigation makes a great impingement in natural flavour industry by introducing products synthesized under solvent-free conditions to the flavour market. PMID:23819043

  2. Lipase Mediated Isoamyl Acetate Synthesis in Solvent-Free System Using Vinyl Acetate as Acyl Donor

    Directory of Open Access Journals (Sweden)

    Annapurna Kumari

    2009-01-01

    Full Text Available Synthesis of isoamyl acetate, a flavour ester extensively used in food industry, has been carried out in a solvent-free system. In the present study, an attempt has been made to enhance the isoamyl acetate synthesis yield by transesterification of isoamyl alcohol with vinyl acetate using immobilized Rhizopus oryzae NRRL 3562 lipase. In the present synthesis, substrates had no inhibitory effect on immobilized lipase. The effects of various reaction parameters on isoamyl acetate synthesis were studied and maximum conversion was achieved at 16 % (by mass per volume of immobilized lipase, 40 °C and 200 rpm. Under these conditions, 8-hour reaction time was sufficient to reach a high ester conversion of 95 % with 0.5 mol/L of isoamyl alcohol. The structure of the transesterified product was confirmed by infrared and nuclear magnetic resonance spectroscopic studies. Immobilized lipase had Km and vmax values of 306.53 mmol/L and 99 µmol/(h·g respectively, for isoamyl acetate synthesis in a solvent-free system.

  3. Durability of solvent-free one-step self-etch adhesive under simulated intrapulpal pressure.

    Science.gov (United States)

    Nagi, Shaymaa M

    2015-10-01

    There are different solvents presented in simplified adhesives. Bond-1 SF has been developed, which contains neither water nor organic solvents, in order to eliminate technical issues in terms of evaporation of solvents and concerns for the durability of resin-dentin bond. Thus this study was conducted to evaluate the microtensile bond strength (?TBS) of solvent-free and ethanol-based one-step self-etch adhesives to dentin under simulated intrapulpal pressure (IPP). Occlusal surfaces of human molars were prepared to expose mid-dentin depth. Bond-1SF Solvent-Free SE [SF] and AdperTM easy one adhesives [AE] were applied on dentin specimens. Resin composite build up was done in increments. Then specimens were stored under simulated IPP 20 mmHg, immersed in artificial saliva at 37 ºC for 24 hours (24h) and 6 months (6m). Specimens were sectioned into sticks of (1 mm²) to be tested for (?TBS) using a universal testing machine. Both fractured sections of each stick were inspected using a stereomicroscope at 40× magnification to determine the mode of failure. Data were statistically analyzed by Two-way ANOVA of Variance. There was no statistically significant difference between the mean ?TBS of both [SF] and [AE] adhesives at both aging periods, 24h and 6m (pself-etch adhesives, solvents.

  4. Structure of solvent-free grafted nanoparticles: Molecular dynamics and density-functional theory

    KAUST Repository

    Chremos, Alexandros

    2011-01-01

    The structure of solvent-free oligomer-grafted nanoparticles has been investigated using molecular dynamics simulations and density-functional theory. At low temperatures and moderate to high oligomer lengths, the qualitative features of the core particle pair probability, structure factor, and the oligomer brush configuration obtained from the simulations can be explained by a density-functional theory that incorporates the configurational entropy of the space-filling oligomers. In particular, the structure factor at small wave numbers attains a value much smaller than the corresponding hard-sphere suspension, the first peak of the pair distribution function is enhanced due to entropic attractions among the particles, and the oligomer brush expands with decreasing particle volume fraction to fill the interstitial space. At higher temperatures, the simulations reveal effects that differ from the theory and are likely caused by steric repulsions of the expanded corona chains. © 2011 American Institute of Physics.

  5. Cinnamyl acetate synthesis by lipase-catalyzed transesterification in a solvent-free system.

    Science.gov (United States)

    Geng, Bo; Wang, Mengfan; Qi, Wei; Su, Rongxin; He, Zhimin

    2012-01-01

    Cinnamyl acetate was synthesized using immobilized lipase through transesterification between ethyl acetate and cinnamyl alcohol. In the solvent-free system, ethyl acetate acted as not only the acyl donor but also as the solvent of cinnamyl alcohol. Conversion (90.06%) was achieved after 3 H when transesterification was carried out at ethyl acetate/cinnamyl alcohol 15:1, 2.67 g L of lipase (Novozym 435) loading, and 40°C. Excellent stability and reusability of the enzyme resulted from the moderate reaction system. Kinetic studies showed that the Michaelis constants for ethyl acetate and cinnamyl alcohol and the inhibition constant of cinnamyl alcohol were 2.241, 206.82, and 0.461 mmol L⁻¹, respectively, which indicated that the reaction complied with the Ping-Pong Bi-Bi mechanism, with the inhibition of cinnamyl alcohol on lipase. Copyright © 2012 International Union of Biochemistry and Molecular Biology, Inc.

  6. Solvent-free optical resolution of N-methylamphetamine by distillation after partial diastereoisomeric salt formation.

    Science.gov (United States)

    Kozma, D; Fogassy, E

    2001-08-01

    Solvent-free optical resolution of N-methylamphetamine was developed by distillation after partial diastereoisomeric salt formation. From the 18 chiral acids tested by this method, five provide by this method resolution: O,O'-dibenzoyltartaric acid, O,O'-di-p-toluoyltartaric acid, 6-methoxy-alpha-methyl-2-naphthaleneacetic acid (Naproxen), the cis-permetrinic acid, and the 2-phenoxypropionic acid. Among them the O,O'-dibenzoyltartaric acid in water-free form provided the more effective resolution. The efficiency of this resolution S = 0.74 is in the range of the industrial-scale resolutions and not worse than the efficiency achieved by optical resolution via fractional crystallization. Copyright 2001 Wiley-Liss, Inc.

  7. Solvent-Free Patterning of Colloidal Quantum Dot Films Utilizing Shape Memory Polymers

    Directory of Open Access Journals (Sweden)

    Hohyun Keum

    2017-01-01

    Full Text Available Colloidal quantum dots (QDs with properties that can be tuned by size, shape, and composition are promising for the next generation of photonic and electronic devices. However, utilization of these materials in such devices is hindered by the limited compatibility of established semiconductor processing techniques. In this context, patterning of QD films formed from colloidal solutions is a critical challenge and alternative methods are currently being developed for the broader adoption of colloidal QDs in functional devices. Here, we present a solvent-free approach to patterning QD films by utilizing a shape memory polymer (SMP. The high pull-off force of the SMP below glass transition temperature (Tg in conjunction with the conformal contact at elevated temperatures (above Tg enables large-area, rate-independent, fine patterning while preserving desired properties of QDs.

  8. Solvent-free synthesis of three layered manganese sulfate-oxalates with different pore apertures

    Science.gov (United States)

    Shi, Jingyu; Guo, Furong; Yang, Meng; Zeng, Hongmei; Lin, Zhien

    2018-01-01

    Three manganese sulfate-oxalates, namely, H2pip·Mn2(SO4)2(ox)(H2O)2·2H2O (1), H3ipaṡMn2(SO4)(ox)2.5·H2O (2), and H3dptaṡMn2(SO4)2(ox)1.5(H2O)3 (3), were prepared under solvent-free conditions, where pip = piperazine, ox = oxalate, ipa = 3,3‧-iminobis(N,N-dimethylpropylamine), and dpta = dipropylenetriamine. These compounds have different layered structures intercalated with organic cations. Their pore apertures range from small 8-membered ring (8 MR) to large 12 MR and extra-large 20 MR. The temperature dependence of the magnetic susceptibility of these compounds were also investigated.

  9. Development of a new solvent-free flow efficiency coating for natural gas pipelines

    Energy Technology Data Exchange (ETDEWEB)

    Fogg, Graham A.; Morse, Jennifer [Bredero Shaw, Houston, TX (United States)

    2005-07-01

    Pipeline design engineers have traditionally considered external anti-corrosion coatings for the protection of gas transmission pipelines, with less consideration given to the benefits of internal flow efficiency coatings. This paper reviews the benefits of using a traditional solvent-based flow efficiency coating, and the relationship between the internal surface roughness of a pipe, the pressure drop across the pipeline, and the maximum flow rate of gas through the pipeline. To improve upon existing solvent-based flow efficiency coatings, a research program was undertaken to develop a solvent-free coating. The stages in the development of this coating are discussed, resulting in the plant application of the coating and final qualification to API RP 5L2. (author)

  10. Solvent free low-melt viscosity imide oligomers and thermosetting polymide composites

    Science.gov (United States)

    Chuang, Chun-Hua (Inventor)

    2012-01-01

    .[.This invention relates to the composition and a solvent-free process for preparing novel imide oligomers and polymers specifically formulated with effective amounts of a dianhydride such as 2,3,3',4-biphenyltetra carboxylic dianydride (a-BPDA), at least one aromatic diamine and an endcapped of 4-phenylethynylphthalic anhydride (PEPA) or nadic anhydride to produce imide oligomers that possess a low-melt viscosity of 1-60 poise at 260-280.degree. C. When the imide oligomer melt is cured at about 371.degree. C. in a press or autoclave under 100-500 psi, the melt resulted in a thermoset polyimide having a glass transition temperature (T.sub.g) equal to and above 310.degree. C. A novel feature of this process is that the monomers; namely the dianhydrides, diamines and the endcaps, are melt processable to form imide oligomers at temperatures ranging between 232-280.degree. C. (450-535.degree. F.) without any solvent. These low-melt imide oligomers can be easily processed by resin transfer molding (RTM), vacuum-assisted resin transfer molding (VARTM) or the resin infusion process with fiber preforms e.g. carbon, glass or quartz preforms to produce polyimide matrix composites with 288-343.degree. C. (550-650.degree. F.) high temperature performance capability..]. .Iadd.This invention relates to compositions and a solvent-free reaction process for preparing imide oligomers and polymers specifically derived from effective amounts of dianhydrides such as 2,3,3',4'-biphenyltetracarboxylic dianhydride (a-BPDA), at least one aromatic polyamine and an end-cap such as 4-phenylethynyphthalic anhydride (PEPA) or nadic anhydride to produce imide oligomers that possess a low-melt viscosity of 1-60 poise at 260.degree. C.-280.degree. C..Iaddend.

  11. Conversion of glycerol to polyglycerol over waste duck-bones as a catalyst in solvent free etherification process

    Science.gov (United States)

    Ayoub, Muhammad; Sufian, Suriati; Mekuria Hailegiorgis, Sintayehu; Ullah, Sami; Uemura, Yoshimitsu

    2017-08-01

    The alkaline catalyst derived from the duck-bones was used for conversion of glycerol to polyglycerol via solvent free etherification process. The physicochemical properties of prepared materials were duck-bones were systematically investigated as a catalyst by latest techniques of Thermo gravimetric analysis (TGA), X-ray diffraction (XRD), and Brunauer-Emmett-Teller (BET) surface properties. TGA showed different trends of duck-bones decomposition from room temperature to 1000C. XRD pattern showed a clear and sharp peaks of a crystalline phase of CaO. The activity of the catalysts was in line with the basic amount of the strong base sites, surface area, and crystalline phase in the catalysts. The prepared catalyst derived from duck-bones provided high activity (99 %) for glycerol conversion and around 68 % yield for polyglycerol production. These ample wastes of duck-bones have good potential to be used as polyglycerol production catalysts due to have high quantity of Ca compare to other types of bones like cow, chicken and fish bones.

  12. Comparison of microwave hydrodistillation and solvent-free microwave extraction of essential oil from Melaleuca leucadendra Linn

    Science.gov (United States)

    Ismanto, A. W.; Kusuma, H. S.; Mahfud, M.

    2017-12-01

    The comparison of solvent-free microwave extraction (SFME) and microwave hydrodistillation (MHD) in the extraction of essential oil from Melaleuca leucadendra Linn. was examined. Dry cajuput leaves were used in this study. The purpose of this study is also to determine optimal condition (microwave power). The relative electric consumption of SFME and MHD methods are both showing 0,1627 kWh/g and 0,3279 kWh/g. The results showed that solvent-free microwave extraction methods able to reduce energy consumption and can be regarded as a green technique for extraction of cajuput oil.

  13. Solvent-free, catalyst-free aza-Michael addition of cyclohexylamine to diethyl maleate: reaction mechanism and kinetics

    Czech Academy of Sciences Publication Activity Database

    Bláha, Michal; Trhlíková, Olga; Podešva, Jiří; Abbrent, Sabina; Steinhart, Miloš; Dybal, Jiří; Dušková-Smrčková, Miroslava

    2018-01-01

    Roč. 74, č. 1 (2018), s. 58-67 ISSN 0040-4020 Institutional support: RVO:61389013 Keywords : Aza-Michael addition * solvent-free * catalyst-free Subject RIV: CD - Macromolecular Chemistry OBOR OECD: Polymer science Impact factor: 2.651, year: 2016

  14. Noticeable facilitation of the bismuth-mediated Barbier-type allylation of aromatic carbonyl compounds under solvent-free conditions.

    Science.gov (United States)

    Wada, Shinobu; Hayashi, Nobuyuki; Suzuki, Hitomi

    2003-06-21

    When milled together with bismuth shot in the presence of allyl halide, aromatic aldehydes readily underwent a Barbier-type allylation to afford the corresponding homoallyl alcohols in good yield. In contrast to the failure in solution reaction, aromatic ketones also underwent allylic carbonyl addition under solvent-free conditions to give the expected tertiary homoallyl alcohols in moderate to good yield.

  15. Nafion®-catalyzed microwave-assisted Ritter reaction: An atom-economic solvent-free synthesis of amides

    Science.gov (United States)

    An atom-economic solvent-free synthesis of amides by the Ritter reaction of alcohols and nitriles under microwave irradiation is reported. This green protocol is catalyzed by solid supported Nafion®NR50 with improved efficiency and reduced waste production.

  16. Fly-ash:H2SO4 catalyzed solvent free efficient synthesis of some aryl chalcones under microwave irradiation

    Science.gov (United States)

    Thirunarayanan, G.; Mayavel, P.; Thirumurthy, K.

    2012-06-01

    Some 2E aryl chalcones have been synthesized using greener catalyst Fly-ash:H2SO4 assisted solvent free environmentally benign Crossed-Aldol reaction. The yields of chalcones are more than 90%. The synthesized chalcones are characterized by their physical constants and spectral data.

  17. Three Component Synthesis of Substituted 4H-[1,3]Dioxin Derivatives Under Solvent-Free Conditions

    Directory of Open Access Journals (Sweden)

    Mohammad Reza Hosseini-Tabatabaei

    2012-01-01

    Full Text Available Reaction between aryl aldehydes, acetylacetone and alkyl isocyanides in solvent-free conditions provided a simple and efficient one-pot route for the synthesis of 1-(2-alkylamino-6-methyl-4-aryl-4H-[1,3]dioxin-5-ylethanone derivatives in excellent yields.

  18. Modeling, Simulation, and Kinetic Studies of Solvent-Free Biosynthesis of Benzyl Acetate

    Directory of Open Access Journals (Sweden)

    Vijay Kumar Garlapati

    2013-01-01

    Full Text Available Solvent-free biosynthesis of benzyl acetate through immobilized lipase-mediated transesterification has been modeled and optimized through statistical integrated artificial intelligence approach. A nonlinear response surface model has been successfully developed based on central composite design with transesterification variables, namely, molarity of alcohol, reaction time, temperature, and immobilized lipase amount as input variables and molar conversion (% as an output variable. Statistical integrated genetic algorithm optimization approach results in an optimized molar conversion of 96.32% with the predicted transesterification variables of 0.47 M alcohol molarity in a reaction time of 13.1 h, at 37.5°C using 13.31 U of immobilized lipase. Immobilized lipase withstands more than 98% relative activity up to 6 recycles and maintains 50% relative activity until 12 recycles. The kinetic constants of benzyl acetate, namely, Km and Vmax were found to be 310 mM and 0.10 mmol h−1 g−1, respectively.

  19. Ultrasound assisted lipase catalyzed synthesis of cinnamyl acetate via transesterification reaction in a solvent free medium.

    Science.gov (United States)

    Tomke, Prerana D; Rathod, Virendra K

    2015-11-01

    Cinnamyl acetate is known for its use as flavor and fragrance material in different industries such as food, pharmaceutical, cosmetic etc. This work focuses on ultrasound assisted lipase (Novozym 435) catalyzed synthesis of cinnamyl acetate via transesterification of cinnamyl alcohol and vinyl acetate in non-aqueous, solvent free system. Optimization of various parameters shows that a higher yield of 99.99% can be obtained at cinnamyl alcohol to vinyl acetate ratio of 1:2 with 0.2% of catalyst, at 40°C and 150 rpm, with lower ultrasound power input of 50 W (Ultrasound intensity 0.81 W/cm(2)), at 25 kHz frequency, 50% duty cycle. Further, the time required for the maximum conversion is reduced to 20 min as compared to 60 min of conventional process. Similarly, the enzyme can be successfully reused seven times without loss of enzyme activity. Thus, ultrasound helps to enhance the enzyme catalyzed synthesis of flavors. Copyright © 2015 Elsevier B.V. All rights reserved.

  20. Solvent-free synthesis of bacillamide analogues as novel cytotoxic and anti-inflammatory agents.

    Science.gov (United States)

    Kumar, Sunil; Aggarwal, Ranjana; Kumar, Virender; Sadana, Rachna; Patel, Bhumi; Kaushik, Pawan; Kaushik, Dhirender

    2016-11-10

    Synthesis of fourteen analogues of bacillamide, a bioactive tryptamide alkaloid of marine origin, has been accomplished through a highly efficient convergent route. The present solvent-free protocol involves the formation of thiazole ring in the initial step followed by amide coupling between substituted ethyl 2-alkyl/aryl/heteroaryl/amino/aminoarylthiazole-4-carboxylates and tryptamine in presence of 2-hydroxy-4,6-dimethylpyrimidine, a solid phase catalyst to yield N-[2-(1H-indol-3-yl)ethyl]-2-alkyl/aryl/heteroaryl/amino/aminoarylthiazole-4-carboxamides as bacillamide analogues having structural variation at position-2 of thiazole ring. Bacillamide and its analogues were evaluated for their cytotoxic activity against three cancer cell lines (HCT-116, MDA-MD-231 and JURKAT cell lines) using colorimetric cell proliferation assay. Compounds 17a and 17b exhibited potent anti-cell proliferation activity with IC50 values in the range of ∼3.0 μM and ∼0.1-0.6 μM, respectively against these cell lines. Preliminary mechanism of action studies indicates that these compounds initiate caspase dependent apoptosis. Also, compounds 16d, 16f, 17a and 17d exhibited excellent anti-inflammatory activity comparable to well-known NSAID indomethacin and better to bacillamide, when evaluated using carrageenan induced rat hind paw oedema method. Copyright © 2016 Elsevier Masson SAS. All rights reserved.

  1. Fabrication of polyacrylonitrile/ acrylamide (PAN/ AM) fibers using a solvent-free coagulation bath

    International Nuclear Information System (INIS)

    Ismail, A.F.; Mahmod, D.S.A.; Rahman, M.A.; Mustafa, A.

    2010-01-01

    Polyacrylonitrile/ Acrylamide (PAN/ AM) fibers have been produced by a simple dry-jet wet spinning process. It has been successfully carried out in the solvent-free coagulation bath. The fabrication process is focusing on controlling the formation of PAN/ AM fibers with desirable characteristics. This new approach was considered due to environmental impact of solvent usage. The production of PAN/ Am fibers consists of three main components including polyacrylonitrile (PAN), Acrylamide (AM) and dimethylformamide (DMF). Aforementioned components must be blended at a specific ratio in order to produce a homogenous polymer solution. Three polymer compositions were prepared for the PAN/ AM fibers fabrication: 16, 18 and 20 wt.%. The results showed that a semi-dilute solution (18 wt.%) was found to be the most suitable polymer composition for PAN/ AM fiber fabrication at room temperature. The PAN/ AM fibers produced at 13 degree Celsius coagulation bath temperature and residence time of 3 sec exhibited Young's modulus of 2.55 GPa which represents the highest Young modulus achieved.(author)

  2. Diffusivities, viscosities, and conductivities of solvent-free ionically grafted nanoparticles

    KAUST Repository

    Hong, Bingbing

    2013-01-01

    A new class of conductive composite materials, solvent-free ionically grafted nanoparticles, were modeled by coarse-grained molecular dynamics methods. The grafted oligomeric counterions were observed to migrate between different cores, contributing to the unique properties of the materials. We investigated the dynamics by analyzing the dependence on temperature and structural parameters of the transport properties (self-diffusion coefficients, viscosities and conductivities) and counterion migration kinetics. Temperature dependence of all properties follows the Arrhenius equation, but chain length and grafting density have distinct effects on different properties. In particular, structural effects on the diffusion coefficients are described by the Rouse model and the theory of nanoparticles diffusing in polymer solutions, viscosities are strongly influenced by clustering of cores, and conductivities are dominated by the motions of oligomeric counterions. We analyzed the migration kinetics of oligomeric counterions in a manner analogous to unimer exchange between micellar aggregates. The counterion migrations follow the "double-core" mechanism and are kinetically controlled by neighboring-core collisions. © 2013 The Royal Society of Chemistry.

  3. An Efficient, Solvent-Free Process for Synthesizing Anhydrous MgCl2

    Energy Technology Data Exchange (ETDEWEB)

    Motkuri, Radha K.; Vemuri, Venkata Rama S.; Barpaga, Dushyant; Schaef, Herbert T.; Loring, John S.; Martin, Paul F.; Lao, David; Nune, Satish K.; McGrail, Bernard P.

    2018-01-02

    A new efficient and solvent-free method for the synthesis of anhydrous MgCl2 from its hexahydrate is proposed. Fluidized dehydration of MgCl2·6H2O feedstock at 200 °C in a porous bed reactor yields MgCl2·nH2O (0 < n < 1), which has a similar diffraction pattern as activated MgCl2. The MgCl2·nH2O is then ammoniated directly using liquefied NH3 in the absence of solvent to form MgCl2·6NH3. Calcination of the hexammoniate complex at 300 °C then yields anhydrous MgCl2. Both dehydration and deammoniation were thoroughly studied using in situ as well as ex situ characterization techniques. Specifically, a detailed understanding of the dehydration process was monitored by in situ PXRD and in situ FTIR techniques where formation of salt with nH2O (n = 4, 2, 1, <1) was characterized. Given the reduction in thermal energy required to produce dehydrated feedstock with this method compared with current strategies, significant cost benefits are expected. Overall, the combined effect of activation, macroporosity, and coordinated water depletion allows the formation of hexammoniate without using solvent, thus minimizing waste formation.

  4. Solid lipid nanoparticles for encapsulation of hydrophilic drugs by an organic solvent free double emulsion technique.

    Science.gov (United States)

    Becker Peres, Luana; Becker Peres, Laize; de Araújo, Pedro Henrique Hermes; Sayer, Claudia

    2016-04-01

    Encapsulation of hydrophilic compounds for drug delivery systems with high loading efficiency is not easily feasible and remains a challenge, mainly due to the leaking of the drug to the outer aqueous phase during nanoparticle production. Usually, encapsulation of hydrophilic drugs is achieved by using double emulsion or inverse miniemulsion systems that often require the use of organic solvents, which may generate toxicological issues arising from solvent residues. Herein, we present the preparation of solid lipid nanoparticles loaded with a hydrophilic compound by a novel organic solvent free double emulsion/melt dispersion technique. The main objective of this study was to investigate the influence of important process and formulation variables, such as lipid composition, surfactant type, sonication parameters and lipid solidification conditions over physicochemical characteristics of SLN dispersion. Particle size and dispersity, as well as dispersion stability were used as responses. SLN dispersions with average size ranging from 277 to 550 nm were obtained, showing stability for over 60 days at 4 °C depending on the chosen emulsifying system. Entrapment efficiency of fluorescent dyes used as model markers was assessed by fluorescence microscopy and UV-vis spectrophotometry and results suggest that the obtained lipid based nanoparticles could be potentially applied as a delivery system of water soluble drugs. Copyright © 2015 Elsevier B.V. All rights reserved.

  5. Natural zwitterionic l-Carnitine as efficient cryoprotectant for solvent-free cell cryopreservation.

    Science.gov (United States)

    Zhai, Hongwen; Yang, Jing; Zhang, Jiamin; Pan, Chao; Cai, Nana; Zhu, Yingnan; Zhang, Lei

    2017-07-15

    Organic solvents, such as dimethyl sulfoxide (DMSO) and glycerol, have been commonly used as cryoprotectants (CPAs) in cell cryopreservation. However, their cytotoxicity and need of complex freezing protocols have impeded their applications especially in clinical cell therapy and regenerative medicine. Trehalose has been explored as a natural CPA to cryopreserve cells, but its poor cell permeability frequently results in low cryopreservation efficacy. In this work, we presented that a natural zwitterionic molecule-l-carnitine-could serve as a promising CPA for solvent-free cryopreservation. We demonstrated that l-carnitine possessed strong ability to depress water freezing point, and with ultrarapid freezing protocol, we studied the post-thaw survival efficiency of four cell lines (GLC-82 cells, MCF-7 cells, NIH-3T3 cells and Sheep Red Blood Cells) using l-carnitine without addition of any organic solvents. At the optimum l-carnitine concentration, all four cell lines could achieve above 80% survival efficiency, compared with the significantly lower efficiency using organic CPAs and trehalose. After cryopreservation, the recovered cell behaviors including cell attachment and proliferation were found to be similar to the normal cells, indicating that the cell functionalities were not affected. Moreover, l-carnitine showed no observable cytotoxicity, which was superior to the organic CPAs. This work offered an attractive alternative to traditional CPAs and held great promise to revolutionize current cryopreservation technologies, to benefit the patients in various cell-based clinical applications. Copyright © 2017 Elsevier Inc. All rights reserved.

  6. Efficient and Highly Selective Solvent-Free Oxidation of Primary Alcohols to Aldehydes Using Bucky Nanodiamond.

    Science.gov (United States)

    Lin, Yangming; Wu, Kuang-Hsu Tim; Yu, Linhui; Heumann, Saskia; Su, Dang Sheng

    2017-09-11

    Selective oxidation of alcohols to aldehydes is widely applicable to the synthesis of various green chemicals. The poor chemoselectivity for complicated primary aldehydes over state-of-the-art metal-free or metal-based catalysts represents a major obstacle for industrial application. Bucky nanodiamond is a potential green catalyst that exhibits excellent chemoselectivity and cycling stability for the selective oxidation of primary alcohols in diverse structures (22 examples, including aromatic, substituted aromatic, unsaturated, heterocyclic, and linear chain alcohols) to their corresponding aldehydes. The results are comparable to reported transition-metal catalysts including conventional Pt/C and Ru/C catalysts for certain substrates under solvent-free conditions. The possible activation process of the oxidant and substrates by the surface oxygen groups and defect species are revealed with model catalysts, ex situ electrochemical measurements, and ex situ attenuated total reflectance. The zigzag edges of sp 2 carbon planes are shown to play a key role in these reactions. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Greening Wittig Reactions: Solvent-Free Synthesis of Ethyl Trans-Cinnamate and Trans-3-(9-Anthryl)-2-Propenoic Acid Ethyl Ester

    Science.gov (United States)

    Nguyen, Kim Chi; Weizman, Haim

    2007-01-01

    Green procedure is used to create solvent-free alternatives for conventional Wittig reactions, which are widely used to install a double bond in a highly selective manner. Solvent-free reactions reduce health and environmental risks and provide a basis for an inquiry-based discussion of the stereochemistry of the Wittig reaction and the factors…

  8. N-Functionalized L-proline anchored MCM-41: a novel organic-inorganic hybrid material for solvent-free aminolysis of styrene oxide under microwave irradiation.

    Science.gov (United States)

    Aghapoor, Kioumars; Amini, Mostafa M; Jadidi, Khosrow; Darabi, Hossein Reza

    2015-01-01

    A novel organic-inorganic hybrid material, namely L-prol-N-pMCM-41, was synthesized via two steps by covalently anchoring N-functionalized proline derivative (L-prol-N-pTMS) into the pore channels of MCM-41 silica. The prepared material was characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), nitrogen adsorption-desorption isotherm, Brunauer-Emmett-Teller (BET) surface area analysis, and Fourier Transform Infrared spectroscopy (FTIR). The immobilized catalyst demonstrated moderate to high catalytic activity and excellent regioselectivity for the ring opening of styrene oxide with aniline derivatives under microwave irradiation and solvent-free conditions. The catalyst could be rapidly separated from the reaction mixture and reused up to five runs with good conversion and high regioselectivity.

  9. Extraction of orange peel's essential oil by solvent-free microwave extraction

    Science.gov (United States)

    Qadariyah, Lailatul; Amelia, Prilia Dwi; Admiralia, Cininta; Bhuana, Donny S.; Mahfud, Mahfud

    2017-05-01

    Sweet orange peel (Citrus sinensis) is part of orange plant that contains essential oils. Generally, taking essential oil from orange peel is still using hydrodistillation and steam-hydrodistillation method which still needs solvent and takes a long time to produce high quality essential oil. Therefore, the objectives of this experiment are to study the process of orange peel's essential oil extraction using Solvent Free Microwave Extraction (SFME) and to study the operating condition that effect an optimum yield and quality of the essential oil. In this experiment, extraction process with SFME method goes for 60 minutes at atmospheric pressure. Variables for SFME are: variation of orange peel condition (fresh and dry), ratio orange peel mass to distiller volume (0,1; 0,2; 0,3; 0,4 g/mL), orange peel size (±0,5; ±2; ±3,5 cm width), and microwave power (100, 264, 400 Watt). Moisture content of fresh peel is 71,4% and for dry peel is 17,37% which is obtained by sun drying. The result of this experiment will be analyzed with GC-MS, SEM, density, and miscibility in ethanol 90%. The optimum result obtained from this experiment based on the number of the yield under condition of fresh orange peel is at peel mass/distiller volume 0,1 g/mL, orange peel size ±3,5 cm width, and microwave power 400 Watt, results 1,6738% yield. The result of GC-MS for fresh orange peel shows that the dominant compound is Limonene 54,140% and for dry orange peel is Limonene 59,705%. The density obtained is around 0,8282-0,8530 g/mL and miscibility in ethanol 90% is 1:5.

  10. Solvent free synthesis and structural evaluation of polyurethane films based on poly(ethylene glycol and poly(caprolactone

    Directory of Open Access Journals (Sweden)

    V. Kupka

    2016-06-01

    Full Text Available Biodegradable amphiphilic polyurethane films (bio-PUs were synthesized by solvent free polyaddition reaction of hydrophilic poly(ethylene glycol (PEG and hydrophobic poly(caprolactone (PCL as macrodiols with hexamethylene diisocyanate. Samples were subsequently heat cured in order to obtain 3D crosslinked structure. Different PCL/PEG ratios allowed controlling the toughness of the resulting bio-PUs. Significant enhancement of Young’s modulus, strength and elongation at break was observed at a PCL/PEG molar ratio above 3. The change in the bio-PU mechanical behavior was ascribed to the formation of crystalline PCL domains in the bio-PU network. The presence of PEG increased both the ability to absorb water and the rate of hydrolytic degradation, while PCL increased the cell viability. Prepared solvent free bio-PUs may advantageously be used in medicine as elastic resorbable material applicable against post-surgical adhesions.

  11. Application of 2k Full Factorial Design in Optimization of Solvent-Free Microwave Extraction of Ginger Essential Oil

    Directory of Open Access Journals (Sweden)

    Mumtaj Shah

    2014-01-01

    Full Text Available The solvent-free microwave extraction of essential oil from ginger was optimized using a 23 full factorial design in terms of oil yield to determine the optimum extraction conditions. Sixteen experiments were carried out with three varying parameters, extraction time, microwave power, and type of sample for two levels of each. A first order regression equation best fits the experimental data. The predicted values calculated by the regression model were in good agreement with the experimental values. The results showed that the extraction time is the most prominent factor followed by microwave power level and sample type for extraction process. An average of 0.25% of ginger oil can be extracted using current setup. The optimum conditions for the ginger oil extraction using SFME were the extraction time 30 minutes, microwave power level 640 watts, and sample type, crushed sample. Solvent-free microwave extraction proves a green and promising technique for essential oil extraction.

  12. Application of 2k Full Factorial Design in Optimization of Solvent-Free Microwave Extraction of Ginger Essential Oil

    OpenAIRE

    Shah, Mumtaj; Garg, S. K.

    2014-01-01

    The solvent-free microwave extraction of essential oil from ginger was optimized using a 23 full factorial design in terms of oil yield to determine the optimum extraction conditions. Sixteen experiments were carried out with three varying parameters, extraction time, microwave power, and type of sample for two levels of each. A first order regression equation best fits the experimental data. The predicted values calculated by the regression model were in good agreement with the experimental ...

  13. E-Factor minimized hydrophosphonylation of aldehydes catalyzed by polystyryl-BEMP under solvent-free conditions.

    Science.gov (United States)

    Angelini, Tommaso; Bonollo, Simona; Lanari, Daniela; Pizzo, Ferdinando; Vaccaro, Luigi

    2013-08-14

    An efficient protocol for the hydrophosphonylation of aromatic and aliphatic aldehydes catalyzed by PS-BEMP under solvent-free conditions (SolFC) has been reported. Addition reactions were performed by using equimolar amounts of reagents and the resulting α-hydroxyphosphonates were isolated with simple workup procedures. A large scale protocol for the preparation of a representative α-hydroxyphosphonate 3a has been also set up using a flow reactor.

  14. Synthesis of Substituted 2,2′-Dinitrobiphenyls by a Novel Solvent-Free High Yielding Ullmann Coupling Biarylation

    OpenAIRE

    Epps, Ayunna; Barbas, John; Mandouma, Ghislain

    2014-01-01

    Solvent-free reaction using a high-speed ball milling technique has been applied to the classical Ullmann coupling reaction for the first time. Biarylation of 2-iodonitrobenzene was achieved in quantitative yield when performed in a custom-made copper vial through continuous shaking without additional copper or solvent. The product was solid, NMR ready and required no lengthy extraction for purification. This reaction was cleaner, and faster than solution phase coupling which requires longer ...

  15. Solvent-Free Off-On Detection of the Improvised Explosive Triacetone Triperoxide (TATP) with Fluorogenic Materials.

    Science.gov (United States)

    Calvo-Gredilla, Patricia; García-Calvo, José; Cuevas, José V; Torroba, Tomás; Pablos, Jesús-Luis; García, Félix C; García, José-Miguel; Zink-Lorre, Nathalie; Font-Sanchis, Enrique; Sastre-Santos, Ángela; Fernández-Lázaro, Fernando

    2017-10-09

    A fluorogenic perylenediimide-functionalized polyacrylate capable of generating color and fluorescence changes in the presence of triacetone triperoxide TATP), an improvised explosive used in terrorist attacks, under solvent-free, solid-state conditions has been developed. The material works by accumulating volatile TATP until it reaches a threshold; therefore, triggering colorimetric and fluorescent responses. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. An Organocatalyzed and Ultrasound Accelerated Expeditious Synthetic Route to 1,5-Benzodiazepines under Solvent-Free Conditions

    Energy Technology Data Exchange (ETDEWEB)

    Shinde, Pravin V.; Shingate, Bapurao B.; Shingare, Murlidhar S. [Babasaheb Ambedkar Marathwada University, Aurngabad (India)

    2011-04-15

    In the present work, successful implementation of ultrasound irradiations for the rapid synthesis of 1,5- benzodiazepine derivatives under solvent-free conditions is demonstrated. Use of a novel catalyst i.e. camphor sulphonic acid in combination with ultrasound technique is reported for the first time. Comparative study for the synthesis of 1,5-benzodiazepines using conventional as well as ultrasonication method is discussed.

  17. NaHSO4-SiO2-Promoted Solvent-Free Synthesis of Benzoxazoles, Benzimidazoles, and Benzothiazole Derivatives

    Directory of Open Access Journals (Sweden)

    K. Ravi Kumar

    2013-01-01

    Full Text Available An efficient protocol has been developed for the preparation of a library of benzoxazole, benzimidazole, and benzothiazole derivatives from reactions of acyl chlorides with o-substituted aminoaromatics in the presence of catalytic amount of silica-supported sodium hydrogen sulphate under solvent-free conditions. Simple workup procedure, high yield, easy availability, reusability, and use of ecofriendly catalyst are some of the striking features of the present protocol.

  18. Nanocrystalline copper(II oxide-catalyzed one-pot four- component synthesis of polyhydroquinoline derivativesunder solvent-free conditions

    Directory of Open Access Journals (Sweden)

    J. Safaei-Ghomi

    2011-07-01

    Full Text Available The efficient and environmentally friendly method for the one-pot synthesis of polyhydroquinolines has been developed in the presence of CuO nanoparticles. The multi-component reactions of aldehydes, dimedone, ethyl acetoacetate andammonium acetate were carried out under solvent-free conditions to afford some polyhydroquinoline derivatives. This method provides several advantages including high yields, low reaction times and little catalyst loading.

  19. A solvent-free microbial-activated air cathode battery paper platform made with pencil-traced graphite electrodes

    Science.gov (United States)

    Lee, Seung Ho; Ban, Ju Yeon; Oh, Chung-Hun; Park, Hun-Kuk; Choi, Samjin

    2016-06-01

    We present the fabrication of an ultra-low cost, disposable, solvent-free air cathode all-paper microbial fuel cell (MFC) that does not utilize any chemical treatments. The anode and cathode were fabricated by depositing graphite particles by drawing them on paper with a pencil (four strokes). Hydrophobic parchment paper was used as a proton exchange membrane (PEM) to allow only H+ to pass. Air cathode MFC technology, where O2 was used as an electron acceptor, was implemented on the paper platform. The bioelectric current was generated by an electrochemical process involving the redox couple of microbial-activated extracellular electron transferred electrons, PEM-passed H+, and O2 in the cathode. A fully micro-integrated pencil-traced MFC showed a fast start-time, producing current within 10 s after injection of bacterial cells. A single miniaturized all-paper air cathode MFC generated a maximum potential of 300 mV and a maximum current of 11 μA during 100 min after a single injection of Shewanella oneidensis. The micro-fabricated solvent-free air cathode all-paper MFC generated a power of 2,270 nW (5.68 mW/m2). The proposed solvent-free air cathode paper-based MFC device could be used for environmentally-friendly energy storage as well as in single-use medical power supplies that use organic matter.

  20. An efficient Hantzsch synthesis of 1,4-dihydropyridines using p-toluenesulfonic acid under solvent-free condition

    Directory of Open Access Journals (Sweden)

    Masoud Nasr-Esfahani

    2014-03-01

    Full Text Available An efficient Hantzsch synthesis of various substituted 1,4-dihydropyridines from an aldehyde, a β-dicarbonyl compound and ammonium acetate using p-toluenesulfonic acid in a solvent-free condition in the absence of any other co-catalyst is described. The process is simple and environmentally benign and the catalyst is commercially available and inexpensive. This method has the advantages of excellent yield (80–96% and short reaction time (5-20 min.. Irradiation of a typical 1,4-dihydropyridine leads to the corresponding pyridine.

  1. Chemoselective Synthesis of Dithioacetals from Bio-aldehydes with Zeolites under Ambient and Solvent-free Conditions

    DEFF Research Database (Denmark)

    Li, Hu; Yang, Tingting; Riisager, Anders

    2017-01-01

    Dithioacetals are an important class of versatile compounds extensively applied in pharmaceuticals, separations, electrochemistry, and organic synthesis, but few heterogeneous catalytic systems are reported to be generally applicable for their synthesis from a wide range of substrates. A series...... of commercial and modified zeolites are excellent catalysts for thioacetalization of different thiols with carbonyl compounds, including biomass-derived aldehydes, at room temperature under solvent-free conditions. A near quantitative yield of dithioacetal was obtained over H-beta(19) at room temperature...

  2. YCl3-Catalyzed Highly Selective Ring Opening of Epoxides by Amines at Room Temperature and under Solvent-Free Conditions

    Directory of Open Access Journals (Sweden)

    Wuttichai Natongchai

    2017-11-01

    Full Text Available A simple, efficient, and environmentally benign approach for the synthesis of β-amino alcohols is herein described. YCl3 efficiently carried out the ring opening of epoxides by amines to produce β-amino alcohols under solvent-free conditions at room temperature. This catalytic approach is very effective, with several aromatic and aliphatic oxiranes and amines. A mere 1 mol % concentration of YCl3 is enough to deliver β-amino alcohols in good to excellent yields with high regioselectivity.

  3. An Efficient Solvent-Free Protocol for the Synthesis of 1-Amidoalkyl-2-naphthols using Silica-Supported Molybdatophosphoric Acid

    Directory of Open Access Journals (Sweden)

    Abdolkarim Zare

    2010-01-01

    Full Text Available A highly efficient, green and simple solvent-free method for the synthesis of 1-amidoalkyl-2-naphthols via one-pot multi-components condensation of 2-naphthol, aromatic aldehydes and amides in the presence of catalytic amount of silica-supported molybdatophosphoric acid (H3PMo12O40.xH2O/SiO2, 3.17 mol% is described. The reactions proceed rapidly and the title compounds are produced in high to excellent yields.

  4. Hot Melt Extrusion as Solvent-Free Technique for a Continuous Manufacturing of Drug-Loaded Mesoporous Silica

    DEFF Research Database (Denmark)

    Genina, Natalja; Hadi, Batol; Löbmann, Korbinian

    2018-01-01

    The aim of this study is to explore hot melt extrusion (HME) as a solvent-free drug loading technique for preparation of stable amorphous solid dispersions using mesoporous silica (PSi). Ibuprofen and carvedilol were used as poorly soluble active pharmaceutical ingredients (APIs). Due to the high...... friction of an API:PSi mixture below the loading limit of the API, it was necessary to add the polymer Soluplus(®) (SOL) in order to enable the extrusion process. As a result, the APIs were distributed between the PSi and SOL phase after HME. Due to its higher affinity to PSi, ibuprofen was mainly adsorbed...

  5. Enantioselective Solvent-Free Synthesis of 3-Alkyl-3-hydroxy-2-oxoindoles Catalyzed by Binam-Prolinamides

    Directory of Open Access Journals (Sweden)

    Abraham Bañn-Caballero

    2015-07-01

    Full Text Available BINAM-prolinamides are very efficient catalyst for the synthesis of non-protected and N-benzyl isatin derivatives by using an aldol reaction between ketones and isatins under solvent-free conditions. The results in terms of diastereo- and enantioselectivities are good, up to 99% de and 97% ee, and higher to those previously reported in the literature under similar reaction conditions. A high variation of the results is observed depending on the structure of the isatin and the ketone used in the process. While 90% of ee and 97% ee, respectively, is obtained by using (Ra-BINAM-l-(bisprolinamide as catalyst in the addition of cyclohexanone and α-methoxyacetone to free isatin, 90% ee is achieved for the reaction between N-benzyl isatin and acetone using N-tosyl BINAM-l-prolinamide as catalyst. This reaction is also carried out using a silica BINAM-l-prolinamide supported catalyst under solvent-free conditions, which can be reused up to five times giving similar results.

  6. Facile synthesis of 1-naphthol azo dyes with nano SiO2/HIO4 under solvent-free conditions

    Directory of Open Access Journals (Sweden)

    A.R. Pourali

    2013-09-01

    Full Text Available Nano-silica supported periodic acid (nano-SPIA has been utilized as a heterogeneous reagent for a highly efficient and one pot synthesis of azo dyes based on 1-naphthol under solvent-free conditions at room temperature. This method has some advantages, the reaction workup is very easy and the catalyst can be easily separated from the reaction mixture and one-pot procedure. The related products have been obtained in good to excellent yields, high purity and short reaction times. The structures of the products have been characterized by several techniques using UV-Vis, FT-IR, 1H NMR, 13C NMR and mass spectra.DOI: http://dx.doi.org/10.4314/bcse.v27i3.13

  7. Solvent free hydroxylation of the methyl esters of Blighia unijugata seed oil in the presence of cetyltrimethylammonium permanganate

    Directory of Open Access Journals (Sweden)

    Adewuyi Adewale

    2011-12-01

    Full Text Available Abstract Extraction of oil from the seed of Blighia unijugata gave a yield of 50.82 ± 1.20% using hexane in a soxhlet extractor. The iodine and saponification values were 67.60 ± 0.80 g iodine/100 g and 239.20 ± 1.00 mg KOH/g respectively with C18:1 being the dominant fatty acid. Unsaturated methyl esters of Blighia unijugata which had been previously subjected to urea adduct complexation was used to synthesize methyl 9, 10-dihydroxyoctadecanoate via hydroxylation in the presence of cetyltrimethylammonium permanganate (CTAP. The reaction was monitored and confirmed using FTIR and GC-MS. This study has revealed that oxidation reaction of mono unsaturated bonds using CTAP could be achieved under solvent free condition.

  8. An improved solvent-free synthesis of flunixin and 2-(arylamino) nicotinic acid derivatives using boric acid as catalyst.

    Science.gov (United States)

    Yarhosseini, Mahsa; Javanshir, Shahrzad; Dolatkhah, Zahra; Dekamin, Mohammad G

    2017-12-01

    A simple solvent-free protocol for the preparation of flunixin, a potent non-narcotic, non-steroidal anti-inflammatory drugs is reported using boric acid as catalyst. Its salt, flunixin meglumine are then prepared under reflux in EtOH. This sustainable method are then extended for the synthesis of a series of 2-(arylamino) nicotinic acid derivatives. The present protocol combines non-hazardous neat conditions with associated benefits like excellent yield, straightforward workup, and use of readily available and safe catalyst in the absence of any solvent, which are important factors in the pharmaceutical industry. The pathway for catalytic activation of 2-chloronicotic acid with boric acid was also investigated using Gaussian 03 program package.

  9. Solvent-free enzymatic synthesis of feruloylated structured lipids by the transesterification of ethyl ferulate with castor oil.

    Science.gov (United States)

    Sun, Shangde; Zhu, Sha; Bi, Yanlan

    2014-09-01

    A novel enzymatic route of feruloylated structured lipids synthesis by the transesterification of ethyl ferulate (EF) with castor oil, in solvent-free system, was investigated. The transesterification reactions were catalysed by Novozym 435, Lipozyme RMIM, and Lipozyme TLIM, among which Novozym 435 showed the best catalysis performance. Effects of feruloyl donors, reaction variables, and ethanol removal on the transesterification were also studied. High EF conversion (∼100%) was obtained under the following conditions: enzyme load 20% (w/w, relative to the weight of substrates), reaction temperature 90 °C, substrate molar ratio 1:1 (EF/castor oil), 72 h, vacuum pressure 10 mmHg, and 200 rpm. Under these conditions, the transesterification product consisted of 62.6% lipophilic feruloylated structured lipids and 37.3% hydrophilic feruloylated lipids. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. Solvent-free bismuth oxycarbonate-mediated mechanochemical glycosylation: A simple greener alternative to access O-/S-glycosides efficiently.

    Science.gov (United States)

    Sethi, Kashmir Prasad; Kartha, K P Ravindranathan

    2016-11-03

    Preparation of a variety of per-O-acylated O- and S-glycosides of a set of commonly encountered mono- and disaccharides has been achieved effectively by solvent-free grinding of the corresponding acetylated/benzoylated glycosyl bromide and the desired acceptor alcohol/thiol in the presence of bismuth carbonate in a planetary ball mill. The method is simple, requires short reaction time periods and is practical allowing it to be performed at a milligram-to multi-gram scale as required. In the cases where the product is crystalline, it was often obtained in practically pure form by crystallization (and without the need for chromatographic isolation). Copyright © 2016 Elsevier Ltd. All rights reserved.

  11. Solvent-free sample preparation by headspace solid-phase microextraction applied to the tracing of n-butyl nitrite abuse.

    Science.gov (United States)

    Tytgat, J; Daenens, P

    1996-01-01

    The most common alkyl nitrites encountered in forensic toxicology are iso-butyl, n-butyl and iso-pentyl(amyl) nitrites. All have become popular as an aphrodisiac, especially among the homosexual population. Alkyl nitrites are a volatile and unstable group of compounds, which hydrolyse in aqueous matrices to the alcohol and nitrite ion. Here we describe a fast, clean and sensitive procedure for the detection of hydrolysed n-butyl nitrite in whole human blood using a new, solvent-free sampling technique, the headspace solid-phase micro-extraction (HSPME), combined with GC/FID analysis. Sample preparation was investigated using two different stationary phases (100 microns polydimethylsiloxane and 85 microns polyacrylate), coating a fused silica fibre. The effect of different sampling times at fixed temperatures was also studied. Our results demonstrate that the HSPME/GC/FID procedure allows tracing of n-butyl nitrite abuse and detects hydrolysed n-butyl nitrite, i.e., released n-butanol, in whole blood at the 1 ng/mL level.

  12. First-Row-Transition Ion Metals(II-EDTA Functionalized Magnetic Nanoparticles as Catalysts for Solvent-Free Microwave-Induced Oxidation of Alcohols

    Directory of Open Access Journals (Sweden)

    Nuno M. R. Martins

    2017-11-01

    Full Text Available A series of first-row transition-metals combined with ethylenediamine tetraacetic acid (EDTA, as metal-based N,O-chelating ligands, at the surface of ferrite magnetic nanoparticles (MNPs was prepared by a co-precipitation method. Those EDTA functionalized MNPs with general formula Fe3O4@EDTA-M2+ [M = Mn2+ (1, Fe2+ (2, Co2+ (3, Ni2+ (4, Cu2+ (5 or Zn2+ (6] were characterized by FTIR (Fourier Transform Infrared spectroscopy, powder XRD (X-ray Diffraction, SEM (Scanning Electron Microscope, EDS (Energy Dispersive Spectrometer, VSM (Vibrating Sample Magnetometer and TGA (Thermal Gravity Analysis. The application of the magnetic NPs towards the microwave-assisted oxidation of several alcohol substrates in a solvent-free medium was evaluated. The influence of reaction parameters such as temperature, time, type of oxidant, and presence of organic radicals was investigated. This study demonstrates that these MNPs can act as efficient catalysts for the conversion of alcohols to the corresponding ketones or aldehydes with high selectivity and yields up to 99% after 2 h of reaction at 110 °C using t-BuOOH as oxidant. Moreover, they have the advantage of being magnetically recoverable catalysts that can be easily recycled in following runs.

  13. Molecular imaging of banknote and questioned document using solvent-free gold nanoparticle-assisted laser desorption/ionization imaging mass spectrometry.

    Science.gov (United States)

    Tang, Ho-Wai; Wong, Melody Yee-Man; Chan, Sharon Lai-Fung; Che, Chi-Ming; Ng, Kwan-Ming

    2011-01-01

    Direct chemical analysis and molecular imaging of questioned documents in a non/minimal-destructive manner is important in forensic science. Here, we demonstrate that solvent-free gold-nanoparticle-assisted laser desorption/ionization mass spectrometry is a sensitive and minimal destructive method for direct detection and imaging of ink and visible and/or fluorescent dyes printed on banknotes or written on questioned documents. Argon ion sputtering of a gold foil allows homogeneous coating of a thin layer of gold nanoparticles on banknotes and checks in a dry state without delocalizing spatial distributions of the analytes. Upon N(2) laser irradiation of the gold nanoparticle-coated banknotes or checks, abundant ions are desorbed and detected. Recording the spatial distributions of the ions can reveal the molecular images of visible and fluorescent ink printed on banknotes and determine the printing order of different ink which may be useful in differentiating real banknotes from fakes. The method can also be applied to identify forged parts in questioned documents, such as number/writing alteration on a check, by tracing different writing patterns that come from different pens.

  14. Mechanically stable solvent-free lipid bilayers in nano- and micro-tapered apertures for reconstitution of cell-free synthesized hERG channels.

    Science.gov (United States)

    Tadaki, Daisuke; Yamaura, Daichi; Araki, Shun; Yoshida, Miyu; Arata, Kohei; Ohori, Takeshi; Ishibashi, Ken-Ichi; Kato, Miki; Ma, Teng; Miyata, Ryusuke; Tozawa, Yuzuru; Yamamoto, Hideaki; Niwano, Michio; Hirano-Iwata, Ayumi

    2017-12-18

    The self-assembled bilayer lipid membrane (BLM) is the basic component of the cell membrane. The reconstitution of ion channel proteins in artificially formed BLMs represents a well-defined system for the functional analysis of ion channels and screening the effects of drugs that act on them. However, because BLMs are unstable, this limits the experimental throughput of BLM reconstitution systems. Here we report on the formation of mechanically stable solvent-free BLMs in microfabricated apertures with defined nano- and micro-tapered edge structures. The role of such nano- and micro-tapered structures on the stability of the BLMs was also investigated. Finally, this BLM system was combined with a cell-free synthesized human ether-a-go-go-related gene channel, a cardiac potassium channel whose relation to arrhythmic side effects following drug treatment is well recognized. Such stable BLMs as these, when combined with a cell-free system, represent a potential platform for screening the effects of drugs that act on various ion-channel genotypes.

  15. Solvent-free covalent functionalization of multi-walled carbon nanotubes and nanodiamond with diamines: Looking for cross-linking effects

    International Nuclear Information System (INIS)

    Basiuk, Elena V.; Basiuk, Vladimir A.; Meza-Laguna, Víctor; Contreras-Torres, Flavio F.; Martínez, Melchor; Rojas-Aguilar, Aarón; Salerno, Marco

    2012-01-01

    Highlights: ► Diamines were used for one-step functionalization of nanotubes and nanodiamond. ► We found experimental evidences of cross-linking effects in these nanomaterials. ► We found a strong orientation effect in the functionalized carbon nanotubes. - Abstract: The covalent functionalization of carbon nanomaterials with diamines is a way to enhance the mechanical strength of nanocomposites due to cross-linking effects, to form complex networks for nanotube-based electronic circuits, as well as is important for a number of biomedical applications. The main goal of the present work was to covalently functionalize pristine multi-walled carbon nanotubes and nanodiamond with three aliphatic diamines (1,8-diaminooctane, 1,10-diaminodecane and 1,12-diaminododecane) and one aromatic diamine (1,5-diaminonaphthalene), by employing a simple one-step solvent-free methodology, which is based on thermal instead of chemical activation. We looked for experimental evidences of cross-linking effects in the carbon nanomaterials synthesized by using solubility/dispersibility tests, atomic force microscopy, scanning and transmission electron microscopy, as well as Fourier-transform infrared spectroscopy and thermogravimetric analysis for additional characterization.

  16. Solvent-free covalent functionalization of multi-walled carbon nanotubes and nanodiamond with diamines: Looking for cross-linking effects

    Energy Technology Data Exchange (ETDEWEB)

    Basiuk, Elena V., E-mail: elenagd@unam.mx [Centro de Ciencias Aplicadas y Desarrollo Tecnologico, Universidad Nacional Autonoma de Mexico, Circuito Exterior, Ciudad Universitaria, 04510 Mexico, D.F. (Mexico); Nanophysics Department, Italian Institute of Technology, via Morego 30, 16163 Genova, Liguria (Italy); Basiuk, Vladimir A. [Nanophysics Department, Italian Institute of Technology, via Morego 30, 16163 Genova, Liguria (Italy); Instituto de Ciencias Nucleares, Universidad Nacional Autonoma de Mexico, Circuito Exterior, Ciudad Universitaria, 04510 Mexico, D.F. (Mexico); Facultad de Ciencias, Universidad Autonoma del Estado de Morelos, Av. Universidad 1001, Col. Chamilpa, 62209 Cuernavaca, Morelos (Mexico); Meza-Laguna, Victor; Contreras-Torres, Flavio F.; Martinez, Melchor [Centro de Ciencias Aplicadas y Desarrollo Tecnologico, Universidad Nacional Autonoma de Mexico, Circuito Exterior, Ciudad Universitaria, 04510 Mexico, D.F. (Mexico); Rojas-Aguilar, Aaron [Centro de Investigacion y de Estudios Avanzados, Instituto Politecnico Nacional, Av. Instituto Politecnico Nacional 2508, Col. San Pedro Zacatenco, 07360 Mexico, D.F. (Mexico); Salerno, Marco [Nanophysics Department, Italian Institute of Technology, via Morego 30, 16163 Genova, Liguria (Italy); and others

    2012-10-15

    Highlights: Black-Right-Pointing-Pointer Diamines were used for one-step functionalization of nanotubes and nanodiamond. Black-Right-Pointing-Pointer We found experimental evidences of cross-linking effects in these nanomaterials. Black-Right-Pointing-Pointer We found a strong orientation effect in the functionalized carbon nanotubes. - Abstract: The covalent functionalization of carbon nanomaterials with diamines is a way to enhance the mechanical strength of nanocomposites due to cross-linking effects, to form complex networks for nanotube-based electronic circuits, as well as is important for a number of biomedical applications. The main goal of the present work was to covalently functionalize pristine multi-walled carbon nanotubes and nanodiamond with three aliphatic diamines (1,8-diaminooctane, 1,10-diaminodecane and 1,12-diaminododecane) and one aromatic diamine (1,5-diaminonaphthalene), by employing a simple one-step solvent-free methodology, which is based on thermal instead of chemical activation. We looked for experimental evidences of cross-linking effects in the carbon nanomaterials synthesized by using solubility/dispersibility tests, atomic force microscopy, scanning and transmission electron microscopy, as well as Fourier-transform infrared spectroscopy and thermogravimetric analysis for additional characterization.

  17. Synthesis of quinoxaline 1,4-di-n-oxide derivatives on solid support using room temperature and microwave-assisted solvent-free procedures

    Energy Technology Data Exchange (ETDEWEB)

    Gomez-Caro, Lilia C.; Sanchez-Sanchez, Mario; Bocanegra-Garcia, Virgilio; Rivera, Gildardo [Universidad Autonoma de Tamaulipas, Reynosa (Mexico). Dept. de Farmacia y Quimica Medicinal; Monge, Antonio [Universidad de Navarra, Pamplona (Spain). Centro de Investigacion en Farmacobiologia Aplicada. Unidad de Investigacion y Desarrollo de Medicamentos

    2011-07-01

    We describe the synthesis of 12 new ethyl and methyl quinoxaline-7-carboxylate 1,4-di-N-oxide derivatives on solid supports with room temperature and microwave-assisted solvent-free procedures. Results show that solid supports have good catalytic activity in the formation of quinoxaline 1,4-di-N-oxide derivatives. We found that florisil and montmorillonite KSF and K10 could be used as new, easily available, inexpensive alternatives of catalysts. Additionally, room temperature and microwave-irradiation solvent-free synthesis was more efficient than a conventional procedure (Beirut reaction), reducing reaction time and increasing yield. (author)

  18. Chemoselective Preparation of 1,1-Diacetates from Aldehydes, Mediated by a Keggin Heteropolyacid Under Solvent Free Conditions at Room Temperature

    Directory of Open Access Journals (Sweden)

    G. Romanelli

    2007-01-01

    Full Text Available A simple, general and efficient method has been developed for the conversion of aldehydes to 1,1-diacetates using acetic anhydride, a catalytic amount of non commercial Keggin heteropolyacid (H6 PalMo11O40 (1% mol in solvent free conditions at room temperature. Aromatic and aliphatic, simple and conjugated aldehydes were protected with excellent yields.

  19. Benign and efficient preparation of thioethers by solvent-free S-alkylation of thiols with alkyl halides catalyzed by potassium fluoride on alumina

    DEFF Research Database (Denmark)

    Nguyen, Kha Ngoc; Duus, Fritz; Luu, Thi Xuan Thi

    2016-01-01

    The preparation of thioethers by S-alkylation of various thiols with alkyl halides under solvent-free reaction conditions using potassium fluoride on alumina (KF/Al2O3) as a solid catalyst has been investigated in detail with respect to three different modes of reaction activation (ultrasound...

  20. An efficient solvent-free synthesis of meso-substituted dipyrromethanes using SnCl2•2H2O catalysis

    Directory of Open Access Journals (Sweden)

    Kabeer Ahmed Shaikh

    2012-07-01

    Full Text Available Highly rapid and simple methodology has been developed for the quantitative synthesis of meso-substituted dipyrromethanes from lowest pyrrole/aldehyde ratio. The method was carried out by using SnCl2•2H2O as a catalyst under solvent free condition. The method is environmentally friendly, easy to workup, and gives excellent yield of the products.

  1. Melamine trisulfonic acid as a highly efficient catalyst for the synthe-sis of 14-aryl-14H-dibenzo[a,j]xanthenes under solvent-free conditions

    Directory of Open Access Journals (Sweden)

    Abdolkarim Zare

    2014-02-01

    Full Text Available Melamine trisulfonic acid (MTSA is utilized as a highly efficient catalyst for the solvent-free condensation of 2-naphthol with arylaldehydes under conventional thermal or microwave irradiation to give 14-aryl-14H-dibenzo[a,j]xanthenes in high to excellent yields and in short reaction times.

  2. Solvent-free fabrication of micro-porous polyurethane amide and polyurethane-urea scaffolds for repair and replacement of the knee-joint meniscus

    NARCIS (Netherlands)

    Spaans, C.J; Belgraver, V.W.; Rienstra, O.; de Groot, J.H; Veth, R.P.H.; Penning, J.P

    2000-01-01

    New porous polyurethane urea and polyurethane amide scaffolds for meniscal reconstruction have been developed in a solvent-free process. As soft segments, copolymers of 50/50 L-lactide/epsilon-caprolactone have been used. After terminating the soft segment with diisocyanates, chain extension was

  3. Microwave-Enhanced Sulphated Zirconia and SZ/MCM-41 Catalyzed Regioselective Synthesis of β-Amino Alcohols Under Solvent-Free Conditions

    Directory of Open Access Journals (Sweden)

    Eduardo González-Zamora

    2008-04-01

    Full Text Available A solvent-free approach for the regioselective synthesis of β-amino alcohols inshorter reaction times and higher yields, compared to conventional heating is described. Itinvolves microwave (MW exposure of undiluted reactants in the presence of sulphatedzirconia (SZ or sulphated zirconia over MCM-41 (SZM as catalyst. Both acid materialscan be easily recovered and reused.

  4. A Facile Solvent Free Microwave Induced Synthesis and Antibacterial Activity of Some 3-(2’-Hydroxyphenyl-5-(Substituted Aryl-2-Pyrazoline-N1-Caboxaldehydes

    Directory of Open Access Journals (Sweden)

    Birbal Bajia

    2007-01-01

    Full Text Available A novel one pot formylation of 3-(2’-hydroxyphenyl-5-(substituted 2-pyrazolines has been carried out using microwave irradiation with formic acid. solvent free reaction afforded title compounds in 80-90% yield with high purity.synthesized compounds were tested for their antibacterial activity using standard drug.

  5. Ultraporous superhydrophobic gas-permeable nano-layers by scalable solvent-free one-step self-assembly

    Science.gov (United States)

    Liu, Guanyu; Wong, William S. Y.; Nasiri, Noushin; Tricoli, Antonio

    2016-03-01

    Superhydrophobic materials with excellent humidity tolerance, high porosity and light transmittance are being investigated for numerous applications including moisture-sensitive catalysts and perovskite solar cells. Here, we report the one-step solvent-free synthesis of ultraporous superhydrophobic nano-layers by the on-the-fly functionalization of nanoparticle aerosols. Short exposure of surfaces to hot Mn3O4, ZnO and TiO2 aerosols results in ultraporous nanoparticle networks with repulsive dewetting state approaching ideal Cassie-Baxter superhydrophobicity. In addition to showcasing sliding angles of ca. 0° and very low contact angle hysteresis of 3° +/- 2°, these optimal nano-layers have up to 98% porosity and pore size of several micrometres, a key feature to enable efficient penetration of gases to the substrate surface. The stability of this ultraporous superhydrophobic morphology is demonstrated by rapidly applying Moses effect-functionality to substrates that parts water up to 5 mm high. This scalable synthesis method offers a flexible and rapid approach for the production of numerous moisture-resistant devices including gas sensors, catalysts and perovskite solar cells.Superhydrophobic materials with excellent humidity tolerance, high porosity and light transmittance are being investigated for numerous applications including moisture-sensitive catalysts and perovskite solar cells. Here, we report the one-step solvent-free synthesis of ultraporous superhydrophobic nano-layers by the on-the-fly functionalization of nanoparticle aerosols. Short exposure of surfaces to hot Mn3O4, ZnO and TiO2 aerosols results in ultraporous nanoparticle networks with repulsive dewetting state approaching ideal Cassie-Baxter superhydrophobicity. In addition to showcasing sliding angles of ca. 0° and very low contact angle hysteresis of 3° +/- 2°, these optimal nano-layers have up to 98% porosity and pore size of several micrometres, a key feature to enable efficient

  6. Optimisation and Characterisation of Lipase-Catalysed Synthesis of a Kojic Monooleate Ester in a Solvent-Free System by Response Surface Methodology.

    Directory of Open Access Journals (Sweden)

    Khairulazhar Jumbri

    Full Text Available Kojic acid is widely used to inhibit the browning effect of tyrosinase in cosmetic and food industries. In this work, synthesis of kojic monooleate ester (KMO was carried out using lipase-catalysed esterification of kojic acid and oleic acid in a solvent-free system. Response Surface Methodology (RSM based on central composite rotatable design (CCRD was used to optimise the main important reaction variables, such as enzyme amount, reaction temperature, substrate molar ratio, and reaction time along with immobilised lipase from Candida Antarctica (Novozym 435 as a biocatalyst. The RSM data indicated that the reaction temperature was less significant in comparison to other factors for the production of a KMO ester. By using this statistical analysis, a quadratic model was developed in order to correlate the preparation variable to the response (reaction yield. The optimum conditions for the enzymatic synthesis of KMO were as follows: an enzyme amount of 2.0 wt%, reaction temperature of 83.69°C, substrate molar ratio of 1:2.37 (mmole kojic acid:oleic acid and a reaction time of 300.0 min. Under these conditions, the actual yield percentage obtained was 42.09%, which is comparably well with the maximum predicted value of 44.46%. Under the optimal conditions, Novozym 435 could be reused for 5 cycles for KMO production percentage yield of at least 40%. The results demonstrated that statistical analysis using RSM can be used efficiently to optimise the production of a KMO ester. Moreover, the optimum conditions obtained can be applied to scale-up the process and minimise the cost.

  7. Synthesis and catalytic activity of Birnessite-Type Manganese Oxide synthesized by solvent-free method

    Science.gov (United States)

    Siregar, S. S.; Awaluddin, A.

    2018-04-01

    Redox reaction between KMnO4 and glucose usingsolvent-free method produces the octahedral layer birnessite-type manganese oxide. The effects of mole ratios, temperatures, and calcinations time on the structures and crystallinity of the oxides were studied throughthe X-ray powder diffraction analysis. The mole ratio of KMnO4/glucose (1:3) produces the purebirnessite with low crystallinity, whereas the mole ratio of KMnO4/glucose (3:1) yields high crystalline birnessite with minor components of hausmannite-type manganese oxide.The increasing of the temperature and calcinations times (300-700 °C and 3-7 h, respectively) willimprove the crystallinity and the purity of the as-synthesized oxide. Further experiments also showed that the as-syntesized octahedral layer birnessite-type manganese oxides have catalytic activity on the degradation of methylene blue (MB) dye with H2O2 as oxidant. The results revealed that the effective degradation could be achieved only in the presence of both the birnessite and H2O2, whereas without the addition of catalyst (H2O2only) or addition of H2O2 (catalyst only), the 3.5% and 15.5% of MB removal were obtained, respectively.

  8. Proton exchange membrane based on chitosan and solvent-free carbon nanotube fluids for fuel cells applications.

    Science.gov (United States)

    Wang, Jie; Gong, Chunli; Wen, Sheng; Liu, Hai; Qin, Caiqin; Xiong, Chuanxi; Dong, Lijie

    2018-04-15

    Poor dispersion and inert ionic conduction are two major obstacles towards using carbon nanotubes (CNTs) to modify polymer electrolyte membranes (PEMs) in energy conversion devices. In this work, solvent-free carbon nanotube fluids (CNT fluids) with liquid-like behavior are prepared through an ion exchange method and incorporated into a chitosan (CS) matrix to fabricate composite membranes. The electrostatic interactions between SO 3 - groups in the CNT fluids and NH 2 groups in the CS matrix, in addition to the unique flow properties of the CNT fluids, promote the uniform dispersion of CNT fluids in the CS matrix. Markedly, the CS/CNT fluid-3 composite membrane is simultaneously reinforced and toughened by 180% and 300% compared to pure CS membrane, respectively. Moreover, the SO 3 - groups in the CNT fluids facilitate the proton transfer such that the proton conductivity of CS/CNT fluid-3 composite membrane reaches a maximum value of 0.044 S cm -1 at 80 °C. Copyright © 2018 Elsevier Ltd. All rights reserved.

  9. Solvent-Free Microwave-Assisted Extraction of Polyphenols from Olive Tree Leaves: Antioxidant and Antimicrobial Properties.

    Science.gov (United States)

    Şahin, Selin; Samli, Ruya; Tan, Ayşe Seher Birteksöz; Barba, Francisco J; Chemat, Farid; Cravotto, Giancarlo; Lorenzo, José M

    2017-06-24

    Response surface methodology (RSM) and artificial neural networks (ANN) were evaluated and compared in order to decide which method was the most appropriate to predict and optimize total phenolic content (TPC) and oleuropein yields in olive tree leaf ( Olea europaea ) extracts, obtained after solvent-free microwave-assisted extraction (SFMAE). The SFMAE processing conditions were: microwave irradiation power 250-350 W, extraction time 2-3 min, and the amount of sample 5-10 g. Furthermore, the antioxidant and antimicrobial activities of the olive leaf extracts, obtained under optimal extraction conditions, were assessed by several in vitro assays. ANN had better prediction performance for TPC and oleuropein yields compared to RSM. The optimum extraction conditions to recover both TPC and oleuropein were: irradiation power 250 W, extraction time 2 min, and amount of sample 5 g, independent of the method used for prediction. Under these conditions, the maximal yield of oleuropein (0.060 ± 0.012 ppm) was obtained and the amount of TPC was 2.480 ± 0.060 ppm. Moreover, olive leaf extracts obtained under optimum SFMAE conditions showed antibacterial activity against S. aureus and S. epidermidis , with a minimum inhibitory concentration (MIC) value of 1.25 mg/mL.

  10. Development of solvent-free offset ink using vegetable oil esters and high molecular-weight resin.

    Science.gov (United States)

    Park, Jung Min; Kim, Young Han; Kim, Sung Bin

    2013-01-01

    In the development of solvent-free offset ink, the roles of resin molecular weight and used solvent on the ink performance were evaluated by examining the relationship between the various properties of resin and solvent and print quality. To find the best performing resin, the soy-oil fatty acid methyl ester (FAME) was applied to the five modified-phenolic resins having different molecular weights. It is found from the experimental results that the ink made of higher molecular weight and better solubility resin gives better printability and print quality. It is because larger molecular weight resin with better solubility gives higher rate of ink transfer. From the ink application of different esters to high molecular weight resin, the best printing performance was yielded from the soy-oil fatty acid butyl ester (FABE). It is due to its high kinematic viscosity resulting in the smallest change of ink transfer weight upon multiple number of printing, which improves the stability of ink quality.

  11. Orthogonal protection of saccharide polyols through solvent-free one-pot sequences based on regioselective silylations

    Directory of Open Access Journals (Sweden)

    Serena Traboni

    2016-12-01

    Full Text Available tert-Butyldimethylsilyl (TBDMS and tert-butyldiphenylsilyl (TBDPS are alcohol protecting groups widely employed in organic synthesis in view of their compatibility with a wide range of conditions. Their regioselective installation on polyols generally requires lengthy reactions and the use of high boiling solvents. In the first part of this paper we demonstrate that regioselective silylation of sugar polyols can be conducted in short times with the requisite silyl chloride and a very limited excess of pyridine (2–3 equivalents. Under these conditions, that can be regarded as solvent-free conditions in view of the insolubility of the polyol substrates, the reactions are faster than in most examples reported in the literature, and can even be further accelerated with a catalytic amount of tetrabutylammonium bromide (TBAB. The strategy proved also useful for either the selective TBDMS protection of secondary alcohols or the fast per-O-trimethylsilylation of saccharide polyols. In the second part of the paper the scope of the silylation approach was significantly extended with the development of unprecedented “one-pot” and “solvent-free” sequences allowing the regioselective silylation/alkylation (or the reverse sequence of saccharide polyols in short times. The developed methodologies represent a very useful and experimentally simple tool for the straightforward access to saccharide building-blocks useful in organic synthesis.

  12. Improved interfacial adhesion in carbon fiber/polyether sulfone composites through an organic solvent-free polyamic acid sizing

    International Nuclear Information System (INIS)

    Yuan, Haojie; Zhang, Shouchun; Lu, Chunxiang; He, Shuqing; An, Feng

    2013-01-01

    An organic solvent-free polyamic acid (PAA) nanoemulsion was obtained by direct ionization of the solid PAA in deionized water, with the average particle size of 261 nm and Zeta potential of −55.1 mV, and used as a carbon fiber sizing to improve the interfacial adhesion between the carbon fiber and polyether sulfone (PES). The surface characteristics of PAA coated carbon fibers were investigated using Fourier transform infrared spectroscopy, scanning electron microscopy, atomic force microscopy and dynamic contact angle measurement. The results demonstrated that a continuous and uniform PAA sizing layer was formed on the surface of carbon fibers, and the surface energy of carbon fibers increased from 42.91 to 54.55 mN/m after sizing treatment. The single fiber pull-out testing was also performed, which showed the increased interfacial shear strength (IFSS) of carbon fiber/PES composites from 33.6 to 49.7 MPa by 47.9%. The major reasons for the improved interfacial adhesion were the increased van der Waals forces between the PES matrix and sizing layer as well as the chemical bonding between the sizing layer and carbon fiber surface. Furthermore, the PAA sizing also presented a positive effect on the interfacial adhesion of carbon fiber/PES composites under hydrothermal condition.

  13. Kinetic study of lipase-catalyzed glycerolysis of palm olein using Lipozyme TLIM in solvent-free system.

    Directory of Open Access Journals (Sweden)

    Thomas Shean Yaw Choong

    Full Text Available Diacylglycerol (DAG and monoacylglycerol (MAG are two natural occurring minor components found in most edible fats and oils. These compounds have gained increasing market demand owing to their unique physicochemical properties. Enzymatic glycerolysis in solvent-free system might be a promising approach in producing DAG and MAG-enriched oil. Understanding on glycerolysis mechanism is therefore of great importance for process simulation and optimization. In this study, a commercial immobilized lipase (Lipozyme TL IM was used to catalyze the glycerolysis reaction. The kinetics of enzymatic glycerolysis reaction between triacylglycerol (TAG and glycerol (G were modeled using rate equation with unsteady-state assumption. Ternary complex, ping-pong bi-bi and complex ping-pong bi-bi models were proposed and compared in this study. The reaction rate constants were determined using non-linear regression and sum of square errors (SSE were minimized. Present work revealed satisfactory agreement between experimental data and the result generated by complex ping-pong bi-bi model as compared to other models. The proposed kinetic model would facilitate understanding on enzymatic glycerolysis for DAG and MAG production and design optimization of a pilot-scale reactor.

  14. Solvent-Free Microwave-Assisted Extraction of Polyphenols from Olive Tree Leaves: Antioxidant and Antimicrobial Properties

    Directory of Open Access Journals (Sweden)

    Selin Şahin

    2017-06-01

    Full Text Available Response surface methodology (RSM and artificial neural networks (ANN were evaluated and compared in order to decide which method was the most appropriate to predict and optimize total phenolic content (TPC and oleuropein yields in olive tree leaf (Olea europaea extracts, obtained after solvent-free microwave-assisted extraction (SFMAE. The SFMAE processing conditions were: microwave irradiation power 250–350 W, extraction time 2–3 min, and the amount of sample 5–10 g. Furthermore, the antioxidant and antimicrobial activities of the olive leaf extracts, obtained under optimal extraction conditions, were assessed by several in vitro assays. ANN had better prediction performance for TPC and oleuropein yields compared to RSM. The optimum extraction conditions to recover both TPC and oleuropein were: irradiation power 250 W, extraction time 2 min, and amount of sample 5 g, independent of the method used for prediction. Under these conditions, the maximal yield of oleuropein (0.060 ± 0.012 ppm was obtained and the amount of TPC was 2.480 ± 0.060 ppm. Moreover, olive leaf extracts obtained under optimum SFMAE conditions showed antibacterial activity against S. aureus and S. epidermidis, with a minimum inhibitory concentration (MIC value of 1.25 mg/mL.

  15. A Solvent-Free Surface Suspension Melt Technique for Making Biodegradable PCL Membrane Scaffolds for Tissue Engineering Applications

    Directory of Open Access Journals (Sweden)

    Ratima Suntornnond

    2016-03-01

    Full Text Available In tissue engineering, there is limited availability of a simple, fast and solvent-free process for fabricating micro-porous thin membrane scaffolds. This paper presents the first report of a novel surface suspension melt technique to fabricate a micro-porous thin membrane scaffolds without using any organic solvent. Briefly, a layer of polycaprolactone (PCL particles is directly spread on top of water in the form of a suspension. After that, with the use of heat, the powder layer is transformed into a melted layer, and following cooling, a thin membrane is obtained. Two different sizes of PCL powder particles (100 µm and 500 µm are used. Results show that membranes made from 100 µm powders have lower thickness, smaller pore size, smoother surface, higher value of stiffness but lower ultimate tensile load compared to membranes made from 500 µm powder. C2C12 cell culture results indicate that the membrane supports cell growth and differentiation. Thus, this novel membrane generation method holds great promise for tissue engineering.

  16. Orthogonal protection of saccharide polyols through solvent-free one-pot sequences based on regioselective silylations

    Science.gov (United States)

    Traboni, Serena; Bedini, Emiliano

    2016-01-01

    tert-Butyldimethylsilyl (TBDMS) and tert-butyldiphenylsilyl (TBDPS) are alcohol protecting groups widely employed in organic synthesis in view of their compatibility with a wide range of conditions. Their regioselective installation on polyols generally requires lengthy reactions and the use of high boiling solvents. In the first part of this paper we demonstrate that regioselective silylation of sugar polyols can be conducted in short times with the requisite silyl chloride and a very limited excess of pyridine (2–3 equivalents). Under these conditions, that can be regarded as solvent-free conditions in view of the insolubility of the polyol substrates, the reactions are faster than in most examples reported in the literature, and can even be further accelerated with a catalytic amount of tetrabutylammonium bromide (TBAB). The strategy proved also useful for either the selective TBDMS protection of secondary alcohols or the fast per-O-trimethylsilylation of saccharide polyols. In the second part of the paper the scope of the silylation approach was significantly extended with the development of unprecedented “one-pot” and “solvent-free” sequences allowing the regioselective silylation/alkylation (or the reverse sequence) of saccharide polyols in short times. The developed methodologies represent a very useful and experimentally simple tool for the straightforward access to saccharide building-blocks useful in organic synthesis. PMID:28144345

  17. Utilization of dynamic light scattering to evaluate Pterodon emarginatus oleoresin-based nanoemulsion formation by non-heating and solvent-free method

    Directory of Open Access Journals (Sweden)

    Anna E.M.F.M. Oliveira

    Full Text Available Abstract Pterodon emarginatus Vogel, Fabaceae, is a great source of bioactive compounds. The most known and studied herbal derivative from this species is an ambar-colored oleoresin that contains vouacapane diterpenes and volatile terpenoids, such as β-caryophyllene. Some recent papers aimed to generate nanoemulsions using this oleoresin for biological applications. However, they used high-energy methods that elevate costs of the process or heating procedures, which offer the disadvantage of possible volatile substances loss. Thus, as part of our ongoing studies with nanobiotechnology of natural products, especially regarding preparation of nanoemulsions with promising plant-based oils by low cost and low energy methods, we decided to evaluate the ability of non-heating and solvent-free method to generate P. emarginatus oleoresin-based nanoemulsions. Two non-ionic surfactants were used to generate the nanoemulsions by a simple homogenization method with vortex stirrer. Low mean droplet size (<180 nm and low polydispersity index (<0.200 were observed even after one day of preparation. The low coefficient of variation for the analyzed parameters of different batches and similar profile for droplet size distribution suggested reproducibility of the method. After 30 days, some degree of droplet growth was observed on nanoemulsion prepared with polyethyleneglycol 400 monooleate, while almost no alteration was observed for nanoemulsion prepared with polysorbate 85. Programmed temperature ramp analysis revealed that no major effects on droplet size and polydispersity index were observed, suggesting the robustness of formed nanoemulsions. Thus, the present study shows for the first time the formation of sucupira-based nanoemulsions by a simple, low cost and ecofriendly method. This study opens new perspectives for bioactive evaluation of this novel nano-product.

  18. Solvent-free thermoplastic-poly(dimethylsiloxane) bonding mediated by UV irradiation followed by gas-phase chemical deposition of an adhesion linker

    Science.gov (United States)

    Ahn, S. Y.; Lee, N. Y.

    2015-07-01

    Here, we introduce a solvent-free strategy for bonding various thermoplastic substrates with poly(dimethylsiloxane) (PDMS) using ultraviolet (UV) irradiation followed by the gas-phase chemical deposition of aminosilane on the UV-irradiated thermoplastic substrates. The thermoplastic substrates were first irradiated with UV for surface hydrophilic treatment and were then grafted with vacuum-evaporated aminosilane, where the alkoxysilane side reacted with the oxidized surface of the thermoplastic substrate. Next, the amine-terminated thermoplastic substrates were treated with corona discharge to oxidize the surface and were bonded with PDMS, which was also oxidized via corona discharge. The two substrates were then hermetically sealed and pressed under atmospheric pressure for 30 min at 60 °C. This process enabled the formation of a robust siloxane bond (Si-O-Si) between the thermoplastic substrate and PDMS under relatively mild conditions using an inexpensive and commercially available UV lamp and Tesla coil. Various thermoplastic substrates were examined for bonding with PDMS, including poly(methylmethacrylate) (PMMA), polycarbonate (PC), poly(ethyleneterephthalate) (PET) and polystyrene (PS). Surface characterizations were performed by measuring the contact angle and performing x-ray photoelectron spectroscopy analysis, and the bond strength was analyzed by conducting various mechanical force measurements such as pull, delamination, leak and burst tests. The average bond strengths for the PMMA-PDMS, PC-PDMS, PET-PDMS and PS-PDMS assemblies were measured at 823.6, 379.3, 291.2 and 229.0 kPa, respectively, confirming the highly reliable performance of the introduced bonding strategy.

  19. Solvent-free enzymatic synthesis of 1, 3-Diacylglycerols by direct esterification of glycerol with saturated fatty acids

    Science.gov (United States)

    2013-01-01

    Background Pure 1, 3-diacylglycerols (1, 3-DAG) have been considered to be significant surfactants in food, cosmetics and pharmaceutical industries, as well as the effect on obesity prevention. Methods In this study, a vacuum-driven air bubbling operation mode was developed and evaluated for the enzymatic synthesis of 1, 3-DAG of saturated fatty acids, by direct esterification of glycerol with fatty acids in a solvent-free system. The employed vacuum-driven air bubbling operation mode was comparable to vacuum-driven N2 bubbling protocol, in terms of lauric acid conversion and 1, 3-dilaurin content. Results Some operation parameters were optimized, and 95.3% of lauric acid conversion and 80.3% of 1, 3-dilaurin content was obtained after 3-h reaction at 50°C, with 5 wt% of Lipozyme RM IM (based on reactants) amount. Of the lipases studied, both Lipozyme RM IM and Novozym 435 exhibited good performance in terms of lauric acid conversion. Lipozyme TL IM, however, showed low activity. Lipozyme RM IM showed good operational stability in this operation protocol, 80.2% of the original catalytic activity remained after 10 consecutive batch applications. Some other 1, 3-DAG were prepared and high content was obtained after purification: 98.5% for 1, 3-dicaprylin, 99.2% for 1, 3-dicaprin, 99.1% for 1, 3-dilaurin, 99.5 for 1, 3-dipalmitin and 99.4% for 1, 3-disterin. Conclusion The established vacuum-driven air bubbling operation protocol had been demonstrated to be a simple-operating, cost-effective, application practical and efficient methodology for 1, 3-DAG preparation. PMID:23656739

  20. Functionalized SBA-15 supported nickel (II)–oxime–imine catalysts for liquid phase oxidation of olefins under solvent-free conditions

    International Nuclear Information System (INIS)

    Paul, Luna; Banerjee, Biplab; Bhaumik, Asim; Ali, Mahammad

    2016-01-01

    A new oxime–imine functionalized highly ordered mesoporous SBA-15 (SBA-15-NH 2 -DAMO) has been synthesized via post-synthesis functionalization of SBA-15 with 3-aminopropyl-triethoxysilane followed by the Schiff base condensation with diacetylmonooxime, which was further reacted with Ni(ClO 4 ) 2 to yield the functionalized nickel catalyst SBA-15-NH 2 -DAMO-Ni. All the synthesized materials were thoroughly characterized using different characterization techniques. It was found that SBA-15-NH 2 -DAMO-Ni catalyzes the one-pot oxidation of olefins like styrene, cyclohexene, cyclooctene, 1-hexene and 1-octene to the corresponding benzaldehyde, cyclohexene-1-ol and cyclooctene-oxide, respectively under solvent-free conditions by using tert-butylhydroperoxide as oxidant. - Graphical abstract: A new well characterized oxime–imine functionalized highly ordered mesoporous SBA-15-NH 2 -DAMO-Ni complex catalyzes the one-pot oxidation of olefins under solvent free mild conditions.

  1. Silica sulfuric acid: a reusable solid catalyst for one pot synthesis of densely substituted pyrrole-fused isocoumarins under solvent-free conditions

    Directory of Open Access Journals (Sweden)

    Sudipta Pathak

    2013-11-01

    Full Text Available A convenient and efficient methodology for the synthesis of densely substituted pyrrole-fused isocoumarins, which employs solid-supported silica sulfuric acid (SSA as catalyst, has been developed. When the mixture of ninhydrin adducts of acetylacetone/ethyl acetoacetate and primary amines was heated on the solid surface of SSA under solvent-free conditions, the pyrrole-fused isocoumarins were formed in good yields. This synthetic method has several advantages such as the employment of solvent-free reaction conditions without the use of any toxic reagents and metal catalysts, the ease of product isolation, the use of a recyclable catalyst, the low cost, the easy availability of the starting materials, and the excellent yields of products.

  2. Green synthesis, characterization and catalytic activity of natural bentonite-supported copper nanoparticles for the solvent-free synthesis of 1-substituted 1H-1,2,3,4-tetrazoles and reduction of 4-nitrophenol

    Directory of Open Access Journals (Sweden)

    Akbar Rostami-Vartooni

    2015-12-01

    Full Text Available In this study, Cu nanoparticles were immobilized on the surface of natural bentonite using Thymus vulgaris extract as a reducing and stabilizing agent. The natural bentonite-supported copper nanoparticles (Cu NPs/bentonite were characterized by FTIR spectroscopy, X-ray diffraction (XRD, X-ray fluorescence (XRF, field emission scanning electron microscopy (FE-SEM, energy dispersive X-ray spectroscopy (EDS, transmission electron microscopy (TEM, selected area electron diffraction (SAED and Brunauer–Emmett–Teller (BET analysis. Afterward, the catalytic performance of the prepared catalyst was investigated for the solvent-free synthesis of 1-substituted 1H-1,2,3,4-tetrazoles and reduction of 4-nitrophenol (4-NP in water. It was found that the Cu NPs/bentonite is a highly active and recyclable catalyst for related reactions.

  3. Field Evaluation of Solvent-Free Sampling with Di-n-butylamine for the Determination of Airborne Monomeric and Oligomeric 1,6-Hexamethylene Diisocyanate

    Science.gov (United States)

    2014-03-27

    Pauluhn, J. (2005). Validation of a solvent-free sampler for the determination of low molecular weight aliphatic isocyanates under thermal degradation ...Skarping, G. (2013). Dry sampling of gas-phase isocyanates and isocyanate aerosols from thermal degradation of polyurethane. The Annals of Occupational...consists of a two-stage denuder and filter arrangement. The first stage, the denuder, is a polypropylene tube coated with a di-n- butylamine (DBA

  4. A facile solvent-free Synthesis Route for the Assembly of Highly CO2 Selective and H2S tolerant NiSIFSIX Metal-Organic Framework

    KAUST Repository

    Eddaoudi, Mohamed

    2015-07-06

    The development of materials for CO2 capture with high selectivity and high tolerance to H2S is of prime importance for various industrially relevant gas streams (e.g. natural gas and biogas upgrading as well as pre-combustion capture). Here, we report the successful fabrication of a MOF with combined exceptional CO2 capture properties and H2S tolerance, namely Ni SIFSIX based-MOF using both solvothermal and solvent-free methodologies.

  5. Salen complexes of zirconium and hafnium: synthesis, structural characterization, controlled hydrolysis, and solvent-free ring-opening polymerization of cyclic esters and lactides.

    Science.gov (United States)

    Saha, Tanmoy Kumar; Ramkumar, Venkatachalam; Chakraborty, Debashis

    2011-04-04

    Dinuclear salen compounds of zirconium and hafnium are efficient initiators for the solvent-free ring-opening polymerization of cyclic ester monomers and lactides. There is a correlation between the theoretical and experimental number-average molecular weights (M(n)'s) in these polymerizations. Polymerization of β-butyrolactone gives poly(3-hydroxybutyrate) with a good M(n) and molecular weight distribution.

  6. One-pot solvent-free rapid and green synthesis of 3,4-dihydropyrano[c]chromenes using grindstone chemistry

    Directory of Open Access Journals (Sweden)

    Devji S. Patel

    2016-09-01

    Full Text Available An easy solvent-free method is described for the synthesis of 3,4-dihydropyrano[c]chromenes by a one pot three component coupling reaction of aromatic aldehydes, malononitrile, and 4-hydroxycoumarin using basic ionic liquid as the catalyst by grindstone chemistry. The salient features of this one pot protocol are short reaction times, cleaner reaction profiles and simple workup.

  7. Multicomponent, Solvent-Free Synthesis of 1-Amidoalkyl-2-naphthols in the Presence of H3+xPMo12-x Vx O40 Heteropolyacids as Recyclable and Green Catalysts

    Directory of Open Access Journals (Sweden)

    Fatemeh F. Bamoharram

    2011-01-01

    Full Text Available A rapid and efficient one-pot method for the synthesis of 1-amidoalkyl-2-naphthols has been developed in the presence of mixed-addenda vanadium(V-substituted polyoxomolybdates including: H3+xPMo12-xVxO40 (x=1-3 heteropolyacids (HPAs as recyclable catalysts under solvent-free conditions. In all cases heteropolyacid with x = 3 gave the highest yield under solvent-free conditions.

  8. Solvent-Free Lipase-Catalyzed Synthesis of Technical-Grade Sugar Esters and Evaluation of Their Physicochemical and Bioactive Properties

    Directory of Open Access Journals (Sweden)

    Ran Ye

    2016-05-01

    Full Text Available Technical-grade oleic acid esters of sucrose and fructose were prepared using solvent-free biocatalysis at 65 °C, without any downstream purification applied, and their physicochemical and bioactivity-related properties were evaluated and compared to a commercially available sucrose laurate emulsifier. To increase the conversion of sucrose and fructose oleate, prepared previously using solvent-free lipase-catalyzed esterification catalyzed by Rhizomucor miehei lipase (81% and 83% ester, respectively, the enzymatic reaction conditions was continued using CaSO4 to control the reactor’s air headspace and a lipase (from Candida antarctica B with a hydrophobic immobilization matrix to provide an ultralow water activity, and high-pressure homogenation, to form metastable suspensions of 2.0–3.3 micron sized saccharide particles in liquid-phase reaction media. These measures led to increased ester content of 89% and 96% for reactions involving sucrose and fructose, respectively. The monoester content among the esters decreased from 90% to <70% due to differences in regioselectivity between the lipases. The resultant technical-grade sucrose and fructose lowered the surface tension to <30 mN/m, and possessed excellent emulsification capability and stability over 36 h using hexadecane and dodecane as oils, comparable to that of sucrose laurate and Tween® 80. The technical-grade sugar esters, particularly fructose oleate, more effectively inhibited gram-positive foodborne pathogens (Lactobacillus plantarum, Pediococcus pentosaceus and Bacillus subtilis. Furthermore, all three sugar esters displayed antitumor activity, particularly the two sucrose esters. This study demonstrates the importance of controlling the biocatalysts’ water activity to achieve high conversion, the impact of a lipase’s regioselectivity in dictating product distribution, and the use of solvent-free biocatalysis to important biobased surfactants useful in foods, cosmetics

  9. “Flash” Solvent-free Synthesis of Triazoles Using a Supported Catalyst

    Directory of Open Access Journals (Sweden)

    Ibtissem Jlalia

    2009-01-01

    Full Text Available A solvent-free synthesis of 1,4-disubstituted-1,2,3-triazoles using neat azides and alkynes and a copper(I polymer supported catalyst (Amberlyst® A21•CuI is presented herein. As it provides the products in high yields and purities within minutes, this method thus being characterized as a "flash" synthesis, and was exemplified through the synthesis of a 24-compound library on a small scale.

  10. A Simple, Rapid and Mild One Pot Synthesis of Benzene Ring Acylated and Demethylated Analogues of Harmine under Solvent-free Conditions

    Directory of Open Access Journals (Sweden)

    Bina S. Siddiqui

    2008-08-01

    Full Text Available A simple, rapid, solvent-free, room temperature one pot synthesis of benzene ring acylated and demethylated analogues of harmine using acyl halides/acid anhydrides and AlCl3 has been developed. Eight different acyl halides/acid anhydrides were used in the synthesis. The resulting mixture of products was separated by column chromatography to afford 10- and 12-monoacyl analogues, along with 10,12-diacyl-11-hydroxy products. In five cases the corresponding 10-acyl-11-hydroxy analogues were also obtained. Yields from the eight syntheses (29 products in total were in the 6-34% range and all compounds were fully characterized.

  11. Facile synthesis of 1-naphthol azo dyes with nano SiO2/HIO4 under solvent-free conditions

    OpenAIRE

    A.R. Pourali; A. Bamoniri; S.M.R. Nazifi

    2013-01-01

    Nano-silica supported periodic acid (nano-SPIA) has been utilized as a heterogeneous reagent for a highly efficient and one pot synthesis of azo dyes based on 1-naphthol under solvent-free conditions at room temperature. This method has some advantages, the reaction workup is very easy and the catalyst can be easily separated from the reaction mixture and one-pot procedure. The related products have been obtained in good to excellent yields, high purity and short reaction times. The structure...

  12. Solvent-free and time-efficient Suzuki-Miyaura reaction in a ball mill: the solid reagent system KF-Al(2)O(3) under inspection.

    Science.gov (United States)

    Bernhardt, Franziska; Trotzki, Ronald; Szuppa, Tony; Stolle, Achim; Ondruschka, Bernd

    2010-01-22

    Although a plethora of synthetic procedures mediated by KF-loaded aluminas is available in the literature, there is almost no data concerning the influence of parameters such as alumina modification or KF-loading on experimental results. Hence, the Pd-catalyzed, solvent-free Suzuki-Miyaura reaction was chosen as model reaction to investigate the effect of the above mentioned parameters on the results of coupling reactions. The results from ball milling experiments led to the conclusion that self-prepared and commercially available KF-Al₂O ₃differ in water content. The higher the residual water content, the higher are the product yields.

  13. Synthesis of Azanucleosides through Regioselective Ring-Opening of Epoxides Catalyzed by Sulphated Zirconia under Microwave and Solvent-Free Conditions

    Directory of Open Access Journals (Sweden)

    Guillermo E. Negrón-Silva

    2012-03-01

    Full Text Available New azanucleosides were obtained using sulphated zirconia (ZS as catalyst in the nucleophilic oxirane ring opening reaction of 1-allyl-3-(oxiran-2-ylmethyl pyrimidine-2,4(1H,3H-dione and 1-allyl-5-methyl-3-(oxiran-2-ylmethyl-pyrimidine-2,4(1H,3H-dione, with (S-prolinol. The new templates were obtained with good yields following a route which exploits the reactivity of epoxides in the presence of sulphated zirconia as catalyst. The key step was carried out using microwave and solvent-free conditions and proceeds with high selectivity.

  14. Solvent-Free Processable and Photo-Patternable Hybrid Gate Dielectric for Flexible Top-Gate Organic Field-Effect Transistors.

    Science.gov (United States)

    Kwon, Jun Seon; Park, Han Wool; Kim, Do Hwan; Kwark, Young-Je

    2017-02-15

    We report a novel solvent-free and direct photopatternable poly[(mercaptopropyl)methyl-siloxane] (PMMS) hybrid dielectric for flexible top-gate organic field-effect transistors (OFETs) utilizing a photoactivated thiol-ene reaction under UV irradiation of 254 nm to induce cross-linking, even in air and at low temperatures. In particular, a solvent-free PMMS-f dielectric film, for which an optimal cross-linking density is shown by a well-organized molar ratio between thiol and vinyl in the thiol-ene reaction, exhibited a high dielectric constant (5.4 @ 100 Hz) and a low leakage current (OFETs with a high reliability against the radius of curvature (9.5, 7.0, and 5.5 mm) and repetitive bending cycles at the radius of curvature of 5.5 mm. This will eventually enable the proposed dielectric design to be used in a variety of applications such as flexible displays and soft organic sensors including chemical and tactile capability.

  15. Functionalized SBA-15 supported nickel (II)–oxime–imine catalysts for liquid phase oxidation of olefins under solvent-free conditions

    Energy Technology Data Exchange (ETDEWEB)

    Paul, Luna [Department of Chemistry, Jadavpur University, Kolkata 700 032 (India); Banerjee, Biplab [Department of Materials Science, Indian Association for the Cultivation of Science, Jadavpur, Kolkata 700 032 (India); Bhaumik, Asim, E-mail: msab@iacs.res.in [Department of Materials Science, Indian Association for the Cultivation of Science, Jadavpur, Kolkata 700 032 (India); Ali, Mahammad, E-mail: m_ali2062@yahoo.com [Department of Chemistry, Jadavpur University, Kolkata 700 032 (India)

    2016-05-15

    A new oxime–imine functionalized highly ordered mesoporous SBA-15 (SBA-15-NH{sub 2}-DAMO) has been synthesized via post-synthesis functionalization of SBA-15 with 3-aminopropyl-triethoxysilane followed by the Schiff base condensation with diacetylmonooxime, which was further reacted with Ni(ClO{sub 4}){sub 2} to yield the functionalized nickel catalyst SBA-15-NH{sub 2}-DAMO-Ni. All the synthesized materials were thoroughly characterized using different characterization techniques. It was found that SBA-15-NH{sub 2}-DAMO-Ni catalyzes the one-pot oxidation of olefins like styrene, cyclohexene, cyclooctene, 1-hexene and 1-octene to the corresponding benzaldehyde, cyclohexene-1-ol and cyclooctene-oxide, respectively under solvent-free conditions by using tert-butylhydroperoxide as oxidant. - Graphical abstract: A new well characterized oxime–imine functionalized highly ordered mesoporous SBA-15-NH{sub 2}-DAMO-Ni complex catalyzes the one-pot oxidation of olefins under solvent free mild conditions.

  16. ZnS nanoparticles as an efficient and reusable heterogeneous catalyst for synthesis of 1-substituted-1 H-tetrazoles under solvent-free conditions

    Science.gov (United States)

    Naeimi, Hossein; Kiani, Fatemeh; Moradian, Mohsen

    2014-09-01

    An efficient and green protocol for the synthesis of 1-substituted-1 H-tetrazoles through cyclization reaction of various primary amines, sodium azide, and triethyl orthoformate was described. In this method, a series of tetrazole derivatives was synthesized by using ZnS nanoparticles as an effective, recoverable, and reusable catalyst under solvent-free conditions. This strategy is a magnificent improvement for the synthesis of these heterocycles due to the non-acidic, clean, and solvent-free conditions via a solid recyclable catalyst. The catalyst was separated by simple filtration and reused seven times without significant loss of activity. The ZnS nanoparticles with high surface area and fine monodisperse particles were prepared using the simple microwave-assisted method without using any surfactant. The ZnS nanoparticle catalyst is a good candidate to replace brønsted acids and metal salts or other catalyst for the preparation of 1-substituted-1 H-tetrazoles in high yields and has potential values for industrial applications.

  17. Superior Thermostability, Good Detonation Properties, Insensitivity, and the Effect on the Thermal Decomposition of Ammonium Perchlorate for a New Solvent-Free 3D Energetic PbII-MOF.

    Science.gov (United States)

    Yang, Qi; Yang, Guoli; Zhang, Wendou; Zhang, Sheng; Yang, Zhaohui; Xie, Gang; Wei, Qing; Chen, Sanping; Gao, Shengli

    2017-07-06

    A new solvent-free energetic MOF, [Pb(HBTI)] n (1) (H 3 BTI=4,5-bis(1H-tetrazole)-1H-imidazole), has been synthesized under hydrothermal and acidic conditions. It was characterized by elemental analysis, IR, thermogravimetric, differential scanning calorimetry (DSC) and SEM. Single crystal X-ray diffraction analysis revealed that 1 features a rigid 3D framework architecture free of solvent molecules. Thermal analysis demonstrated that the thermostability of 1 was up to 325 °C. Non-isothermal kinetic and apparent thermodynamic parameters of exothermic decomposition process of 1 were determined by Kissinger's and Ozawa's methods. Through oxygen-bomb combustion calorimetry, the standard molar enthalpy of formation of 1 was determined. The calculated detonation properties (heat of detonation, detonation velocity and detonation pressure) and sensitivity tests of 1 were carried out. In addition, 1 was explored as combustion promoter to accelerate the thermal decompositions of ammonium perchlorate (AP) by differential scanning calorimetry. Experimental results indicated that 1 possesses potential application prospects in the field of explosives and propellants. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Solvent-free oxidation of secondary alcohols to carbonyl compounds by 1, 3-Dibromo-5, 5-Dimethylhydantoin (DBDMH) and 1, 3-Dichloro-5, 5-Dimethylhydantoin (DCDMH)

    Energy Technology Data Exchange (ETDEWEB)

    Khazaei, Ardeshir; Abbasi, Fatemeh, E-mail: Khazaei_1326@yahoo.com, E-mail: fatemehabbasi807@gmail.com [Faculty of Chemistry, Department of Organic Chemistry, Bu-Ali Sina University, Hamedan (Iran, Islamic Republic of); Kianiborazjani, Maryam [Faculty of Science, Department of Chemistry, Bushehr Payame Noor University (PNU), Bushehr (Iran, Islamic Republic of); Saednia, Shahnaz [Young Researchers Club, Toyserkan Branch, Islamic Azad University, Toyserkan (Iran, Islamic Republic of)

    2014-02-15

    Aldehydes and ketones are important intermediates, especially for the construction of carbon-skeletons. The oxidation of alcohols is so important that a large number of methods and reagents have been reported for this purpose. N-halo reagents are widely used in organic synthesis and as a continuation of our interest in the application of N-halo compounds in organic synthesis, dibromo dimethylhydantoin (DBDMH) and dichloro dimethylhydantoin (DCDMH) were used for the oxidation of alcohols and our ongoing work on development of highly efficient oxidation protocols. We observed the oxidation of secondary alcohols with stoichiometric amounts of DBDMH and DCDMH under solvent-free conditions in the range of temperature 70-80 deg C. (author)

  19. Solvent-Free Biodiesel Production Catalyzed by Crude Lipase Powder from Seeds: Effects of Alcohol Polarity, Glycerol, and Thermodynamic Water Activity.

    Science.gov (United States)

    Kouteu, Paul Alain Nanssou; Blin, Joël; Baréa, Bruno; Barouh, Nathalie; Villeneuve, Pierre

    2017-10-04

    The aim of this work was to evaluate the potential of crude lipase powders made from Adansonia grandidieri and Jatropha mahafalensis seeds for the synthesis of fatty acid alkyl esters in a solvent-free system. The influence of the nature of the alcohol, the amount of glycerol, and hydration of the powder was investigated. Results showed that the activity of these crude lipase powders was inversely proportional to the alcohol polarity and the amount of the glycerol in the reaction medium. To ensure optimum activity, A. grandidieri and J. mahafalensis powders must be conditioned to a water activity of 0.33 and 0.66. To obtain a fatty acid ethyl ester yield greater than 95% with A. grandidieri, ethanol should be introduced at an amount corresponding to a triacylglycerol to ethanol molar ratio of 2:1 every 15 h for 96 h and use 25% of preconditioned crude lipase powders (2 additions of 12.5%).

  20. Facile and rapid synthesis of divers xanthene derivatives using lanthanum(III chloride/chloroacetic acid as an efficient and reusable catalytic system under solvent-free conditions

    Directory of Open Access Journals (Sweden)

    Pouramiri Behjat

    2017-01-01

    Full Text Available LaCl3/ClCH2COOH was used as an efficient, and recyclable catalytic system for synthesis of 11H-benzo[a]xanthene-11-one, hexahydro-1H-xanthene- 1,8(2H-dione and 11-aryl-10H-diindeno[1,2-b:2′,1′-e]pyran-10,12(11H-dione derivatives via a one-pot three-component reaction of aldehydes, 2-naphthol, and cyclic 1,3-dicarbonyl compounds. The reactions proceeded rapidly at 70°C under solvent-free conditions and the desired products were obtained in good to excellent yields.

  1. Sequential Dy(OTf)3 -Catalyzed Solvent-Free Per-O-Acetylation and Regioselective Anomeric De-O-Acetylation of Carbohydrates.

    Science.gov (United States)

    Yan, Yi-Ling; Guo, Jiun-Rung; Liang, Chien-Fu

    2017-09-19

    Dysprosium(III) trifluoromethanesulfonate-catalyzed per-O-acetylation and regioselective anomeric de-O-acetylation of carbohydrates can be tuned by adjusting the reaction medium. In this study, the per-O-acetylation of unprotected sugars by using a near-stoichiometric amount of acetic anhydride under solvent-free conditions resulted in the exclusive formation of acetylated saccharides as anomeric mixtures, whereas anomeric de-O-acetylation in methanol resulted in a moderate-to-excellent yield. Reactions with various unprotected monosaccharides or disaccharides followed by a semi-one-pot sequential conversion into the corresponding acetylated glycosyl hemiacetal also resulted in high yields. Furthermore, the obtained hemiacetals could be successfully transformed into trichloroimidates after Dy(OTf) 3 -catalyzed glycosylation. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  2. Solvent-free Al(OTf)3-catalyzed aminolysis of 1,2-epoxides by 2-picolylamine: a key step in the synthesis of ionic liquids.

    Science.gov (United States)

    Fringuelli, Francesco; Pizzo, Ferdinando; Tortoioli, Simone; Vaccaro, Luigi

    2004-10-29

    Beta-Amino alcohols N-2'-pyridylmethyl substituted 3 have been prepared in excellent yields under mild conditions by the first Lewis acid-catalyzed aminolysis of 1,2-epoxides 1 with the bihaptic amine 2-picolylamine (2) with use of 5 mol % of Al(OTf)(3) under solvent-free conditions. As a representative of a new class of ionic liquids, cis-5-[(4'-methylphenyl)sulfonyl]-1,2,3,4,4a,5,6,11a-octahydropyrido[1,2-a]quinoxalin-11-ium methanesulfonate (6) and its chloride derivative 7 have been synthesized under environmentally friendly conditions by the one-pot aminolysis of cyclohexene oxide (1a) with 2 and intramolecular cyclization of the resulting 2-[(pyridin-2'-yl)methylamino]cyclohexanol (3a).

  3. Mechanochemical Solvent-Free and Catalyst-Free One-Pot Synthesis of Pyrano[2,3-d]Pyrimidine-2,4(1H,3H-Diones with Quantitative Yields

    Directory of Open Access Journals (Sweden)

    M. Reza Naimi-Jamal

    2009-01-01

    Full Text Available Solvent-free synthesis of pyrano[2,3-d]pyrimidine-2,4(1H,3H-diones by ball-milling and without any catalyst is described. This method provides several advantages such as being environmentally friendly, using a simple workup procedure, and affording high yields.

  4. Solvent-free and room temperature synthesis of 3-arylquinolines from different anilines and styrene oxide in the presence of Al2O3/MeSO3H

    Directory of Open Access Journals (Sweden)

    Hashem Sharghi

    2017-09-01

    Full Text Available A highly efficient, simple and environmentally friendly synthesis of 3-arylquinolines has been developed in the presence of Al2O3/MeSO3H via one-pot reaction of anilines and styrene oxide. This methodology provides very rapid access to 3-arylquinolines in good to excellent yields under solvent-free conditions at room temperature in air.

  5. Mesoporous molecular sieve MCM-41 catalyzed one-pot synthesis of 3,4-dihydro-2(1H-pyrimidinones and –thiones under solvent-free conditions

    Directory of Open Access Journals (Sweden)

    Rahim Hekmatshoar

    2011-08-01

    Full Text Available An efficient synthesis of 3,4-dihydro-2(1H-pyrimidinones and -thiones using MCM-41 as the catalyst from an aldehyde, β-keto ester, and urea or thiourea under solvent-free conditions is described.

  6. Preparation of a Nanoemulsion with Carapa guianensis Aublet (Meliaceae Oil by a Low-Energy/Solvent-Free Method and Evaluation of Its Preliminary Residual Larvicidal Activity

    Directory of Open Access Journals (Sweden)

    Flávia L. M. Jesus

    2017-01-01

    Full Text Available Andiroba (Carapa guianensis seeds are the source of an oil with a wide range of biological activities and ethnopharmacological uses. However, few studies have devoted attention to innovative formulations, including nanoemulsions. The present study aimed to obtain a colloidal system with the andiroba oil using a low-energy and organic-solvent-free method. Moreover, the preliminary residual larvicidal activity of the nanoemulsion against Aedes aegypti was evaluated. Oleic and palmitic acids were the major fatty acids, in addition to the phytosterol β-sitosterol and limonoids (tetranortriterpenoids. The required hydrophile-lipophile was around 11.0 and the optimal nanoemulsion was obtained using polysorbate 85. The particle size distribution suggested the presence of small droplets (mean diameter around 150 nm and low polydispersity index (around 0.150. The effect of temperature on particle size distribution revealed that no major droplet size increase occurred. The preliminary residual larvicidal assay suggested that the mortality increased as a function of time. The present study allowed achievement of a potential bioactive oil in water nanoemulsion that may be a promising controlled release system. Moreover, the ecofriendly approach involved in the preparation associated with the great bioactive potential of C. guianensis makes this nanoemulsion very promising for valorization of this Amazon raw material.

  7. Organic Solvent-Free, One-Step Engineering of Graphene-Based Magnetic-Responsive Hybrids Using Design of Experiment-Driven Mechanochemistry.

    Science.gov (United States)

    Mei, Kuo-Ching; Guo, Yukuang; Bai, Jie; Costa, Pedro M; Kafa, Houmam; Protti, Andrea; Hider, Robert C; Al-Jamal, Khuloud T

    2015-07-08

    In this study, we propose an organic solvent-free, one-step mechanochemistry approach to engineer water-dispersible graphene oxide/superparamagnetic iron oxide (GO/SPIOs) hybrids, for biomedical applications. Although mechanochemistry has been proposed in the graphene field for applications such as drug loading, exfoliation or polymer-composite formation, this is the first study to report mechanochemistry for preparation of GO/SPIOs hybrids. The statistical design of experiment (DoE) was employed to control the process parameters. DoE has been used to control formulation processes of other types of nanomaterials. The implementation of DoE for controlling the formulation processes of graphene-based nanomaterials is, however, novel. DoE approach could be of advantage as one can tailor GO-based hybrids of predicted yields and compositions. Hybrids were characterized by TEM, AFM FT-IR, Raman spectroscopy, and TGA. The dose-response magnetic resonance (MR) properties were confirmed by MR imaging of phantoms. The biocompatibility of the hybrids with A549 and J774 cell lines was confirmed by the modified LDH assay.

  8. Comparative Study of Essential Oils Extracted from Egyptian Basil Leaves (Ocimum basilicum L.) Using Hydro-Distillation and Solvent-Free Microwave Extraction.

    Science.gov (United States)

    Chenni, Mohammed; El Abed, Douniazad; Rakotomanomana, Njara; Fernandez, Xavier; Chemat, Farid

    2016-01-19

    Solvent-free microwave extraction (SFME) and conventional hydro-distillation (HD) were used for the extraction of essential oils (EOs) from Egyptian sweet basil (Ocimum basilicum L.) leaves. The two resulting EOs were compared with regards to their chemical composition, antioxidant, and antimicrobial activities. The EO analyzed by GC and GC-MS, presented 65 compounds constituting 99.3% and 99.0% of the total oils obtained by SFME and HD, respectively. The main components of both oils were linalool (43.5% SFME; 48.4% HD), followed by methyl chavicol (13.3% SFME; 14.3% HD) and 1,8-cineole (6.8% SFME; 7.3% HD). Their antioxidant activity were studied with the 2,2-diphenyl-1-picrylhydrazyl (DPPH(•)) radical scavenging method. The heating conditions effect was evaluated by the determination of the Total Polar Materials (TPM) content. The antimicrobial activity was investigated against five microorganisms: two Gram-positive bacteria, Staphylococcus aureus and Bacillus subtilis, two Gram-negative bacteria, Escherichia coli and Pseudomonas aeruginosa, and one yeast, Candida albicans. Both EOs showed high antimicrobial, but weak antioxidant, activities. The results indicated that the SFME method may be a better alternative for the extraction of EO from O. basilicum since it could be considered as providing a richer source of natural antioxidants, as well as strong antimicrobial agents for food preservation.

  9. Immobilization of Pseudomonas fluorescens lipase on hydrophobic supports and application in biodiesel synthesis by transesterification of vegetable oils in solvent-free systems.

    Science.gov (United States)

    Lima, Lionete N; Oliveira, Gladson C; Rojas, Mayerlenis J; Castro, Heizir F; Da Rós, Patrícia C M; Mendes, Adriano A; Giordano, Raquel L C; Tardioli, Paulo W

    2015-04-01

    This work describes the preparation of biocatalysts for ethanolysis of soybean and babassu oils in solvent-free systems. Polystyrene, Amberlite (XAD-7HP), and octyl-silica were tested as supports for the immobilization of Pseudomonas fluorescens lipase (PFL). The use of octyl-silica resulted in a biocatalyst with high values of hydrolytic activity (650.0 ± 15.5 IU/g), immobilization yield (91.3 ± 0.3 %), and recovered activity (82.1 ± 1.5 %). PFL immobilized on octyl-silica was around 12-fold more stable than soluble PFL, at 45 °C and pH 8.0, in the presence of ethanol at 36 % (v/v). The biocatalyst provided high vegetable oil transesterification yields of around 97.5 % after 24 h of reaction using babassu oil and around 80 % after 48 h of reaction using soybean oil. The PFL-octyl-silica biocatalyst retained around 90 % of its initial activity after five cycles of transesterification of soybean oil. Octyl-silica is a promising support that can be used to immobilize PFL for subsequent application in biodiesel synthesis.

  10. A Spin-Active, Electrochromic, Solvent-Free Molecular Liquid Based on Double-Decker Lutetium Phthalocyanine Bearing Long Branched Alkyl Chains.

    Science.gov (United States)

    Zielinska, Agnieszka; Takai, Atsuro; Sakurai, Hiroya; Saeki, Akinori; Leonowicz, Marcin; Nakanishi, Takashi

    2018-01-31

    Synthesis and characterization of a novel, multifunctional, solvent-free room-temperature liquid based on alkylated double-decker lutetium(III) phthalocyanine (Pc 2 Lu) are described. Lowering of the melting point and viscosity of intrinsically solid Pc 2 Lu compounds has been achieved through the attachment of flexible, bulky, and long branched-alkyl chains, that is, thio-2-octyldodecyl, to the periphery of the Pc 2 Lu unit. The embedded Pc 2 Lu unit maintains its inherent molecular functions, such as spin-active nature and electrochromic behavior in the liquid state. Comparison of the properties with a solid-like Pc 2 Lu derivative, functionalized with shorter alkyl chains, that is, thio-2-ethylhexyl, underlines the importance of the hampering effect on the π-π interactions of neighboring Pc 2 Lu molecules by bulkier and longer branched-alkyl chains. This study could possibly pave the way for novel multifunctional liquids whose spin-activities are associated with their rheological or optoelectronic properties. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  11. Performance of an enzymatic packed bed reactor running on babassu oil to yield fatty ethyl esters (FAEE in a solvent-free system

    Directory of Open Access Journals (Sweden)

    Aline Simões

    2015-06-01

    Full Text Available The transesterification reaction of babassu oil with ethanol mediated by Burkholderia cepacia lipase immobilized on SiO2-PVA composite was assessed in a packed bed reactor running in the continuous mode. Experiments were performed in a solvent-free system at 50 °C. The performance of the reactor (14 mm ×210 mm was evaluated using babassu oil and ethanol at two molar ratios of 1:7 and 1:12, respectively, and operational limits in terms of substrate flow rate were determined. The system’s performance was quantified for different flow rates corresponding to space times between 7 and 13 h. Under each condition, the impact of the space time on the ethyl esters formation, the transesterification yield and productivity were determined. The oil to ethanol molar ratio was found as a critical parameter in the conversion of babassu oil into the correspondent ethyl esters. The highest transesterification yield of 96.0 ± 0.9% and productivity of 41.1 ± 1.6 mgester gcatalyst-1h-1 were achieved at the oil to ethanol molar ratio of 1:12 and for space times equal or higher than 11 h. Moreover, the immobilized lipase was found stable with respect to its catalytic characteristics, exhibiting a half-life of 32 d.

  12. Organic solvent-free reversed-phase ion-pairing liquid chromatography coupled to atomic fluorescence spectrometry for organoarsenic species determination in several matrices.

    Science.gov (United States)

    Monasterio, Romina P; Londonio, Juan A; Farias, Silvia S; Smichowski, Patricia; Wuilloud, Rodolfo G

    2011-04-27

    A novel method has been developed to determine As-containing animal feed additives including roxarsone (ROX), p-arsanilic acid (p-ASA) and nitarsone (NIT), as well as other organic As species (dimethylarsonic acid (DMAA) and monomethylarsonic acid (MMAA)) by ion-pairing high-performance liquid chromatography coupled to hydride generation atomic fluorescence spectrometry (IP-HPLC-HG-AFS). A simple isocratic reversed-phase (RP) HPLC method with a mobile phase containing citric acid and sodium hexanesulfonate (pH 2.0) was developed using a C(18) column. The use of an organic solvent free mobile phase turns this methodology into an environmentally friendly alternative. Several ion pair forming agents, such as sodium hexanesulfonate, tetrabutylammonium bisulfate and perfluoroheptanoic acid, were studied. The limits of detection for As species were calculated in standard solution and resulted to be 0.2, 0.5, 0.6, 1.6, and 1.6 μg As L(-1) for MMAA, DMAA, p-ASA, ROX and NIT, respectively. This method exhibited convenient operation, high sensitivity and good repeatability. It was applied to As speciation in different samples including arugula, dog food, dog urine and chicken liver.

  13. Solvent-free functionalization of silicone rubber and efficacy of PAAm brushes grafted from an amino-PPX layer against bacterial adhesion.

    Science.gov (United States)

    Fundeanu, Irina; Klee, Doris; Schouten, Arend J; Busscher, Henk J; van der Mei, Henny C

    2010-11-01

    Silicone rubber is a frequently employed biomaterial that is prone to bacterial adhesion and biofilm formation. In this study, the surface of silicone rubber was solvent-free functionalized by chemical vapor deposition (CVD) of poly(o-amino-p-xylylene-co-p-xylylene (amino-PPX). Subsequently, the amino groups of the amino-PPX layer were used to introduce the initiator from a vapor phase for atom transfer radical polymerization of acrylamide to form polyacrylamide (PAAm) brushes. The modification steps were verified by means of X-ray photoelectron spectroscopy and attenuated total reflection-Fourier transform infrared spectroscopy. Adhesion of Staphylococcus aureus ATCC 12600 and Escherichia coli 3.14 to an amino-PPX-PAAm brush coating in a parallel plate flow chamber was strongly reduced with respect to non-coated silicone rubber - by 93% and 99%, respectively. For E. coli 3.14, this reduction is larger than that obtained for solvent functionalization of γ-aminopropyltriethoxysilane-PAAm brushes due to the higher density of amino groups introduced by the CVD of amino-PPX. Copyright © 2010 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.

  14. Magnetic amine-functionalized graphene oxide as a novel and recyclable bifunctional nanocatalyst for solvent-free synthesis of pyrano[3,2-c]pyridine derivatives

    Directory of Open Access Journals (Sweden)

    Shahnaz Rostamizadeh

    2017-01-01

    Full Text Available The new magnetic amine-functionalized graphene oxide (Fe3O4-GO-NH2 nanocatalyst was prepared through the reaction of 3-aminopropyltriethoxysilane (APTES with magnetic graphene oxide (Fe3O4-GO. It was characterized by XRD, TEM, SEM, FT-IR and EDX techniques. The intrinsic carboxylic acids on the edges of Fe3O4-GO along with the amine groups post grafted to the surface of Fe3O4-GO led to preparation of an acid-base bifunctional magnetically recyclable nanocatalyst. It proved to be efficient nanocatalyst for solvent-free synthesis of pyrano[3,2-c]pyridine derivatives under mild reaction conditions with good to excellent yields. This heterogeneous catalyst also exhibited higher activities than acid or base functionalized mesoporous silica, magnetic GO or basic Al2O3 an even higher than some basic homogeneous catalysts such as triethylamine and piperazine. More importantly, due to the loaded iron oxide nanoparticles, this catalyst could be easily recovered from the reaction mixture using an external magnet and reused without significant decrease in activity even after 7 runs.

  15. Optimization of the production of biodiesel by a commercial immobilized lipase in a solvent-free system using a response surface methodology

    Directory of Open Access Journals (Sweden)

    ZORICA KNEZEVIC

    2008-02-01

    Full Text Available Response surface methodology was used for the evaluation of the effects of various factors on the synthesis of biodiesel catalyzed with immobilized lipase from Rhizomucor miehei in a solvent-free system. The production of biodiesel was optimized and model response equations were obtained, enabling the prediction of biodiesel production from the values of the four main factors. It would seem that the reaction temperature and the amount of water predominantly determined the conversion process while the methanol/oil molar ratio had no significant influence on the reaction rate. The temperature and amount of water showed negative interactive effects on the observed reaction rate per amount of enzyme. However, there were no significant interactions among the other variables according to the test of statistical significance. The highest yield of 10.15 mol kg-1 enzyme was observed at 45 °C with a 6:1 methanol to oil molar ratio and with no added water in the system.

  16. Nanohybrids of nylon 6 with multi-walled carbon nanotubes: solvent-free polymerization of epsilon-caprolactam under variable experimental conditions.

    Science.gov (United States)

    Basiuk, Elena V; Solis-González, Obed A; Alvarez-Zauco, Edgar; Puente-Lee, Iván; Basiuk, Vladimir A

    2009-05-01

    The solvent-free polymerization of epsilon-caprolactam on 1,8-diaminooctane-functionalized multi-walled carbon nanotubes (DA-MWNTs) is proposed as a simple and ecologically friendly approach to the preparation of carbon nanotubes/nylon 6 hybrid materials. The main goal of the present study was to find a minimum temperature resulting in an efficient epsilon-caprolactam polymerization, along with the optimization of the weight ratio of DA-MWNTs to epsilon-caprolactam and reaction time. The effect of temperature was studied in the range of 170 degrees C to 210 degrees C. After the reaction at 170 degrees C, the nanotubes functionalized contained a large amount of unreacted monomer along with ca. 14% of polyamide. Increasing the reaction temperature dramatically reduced the content of epsilon-caprolactam impurity and increased the nylon 6 content to ca. 20%. The reaction time tested was 1, 2, 4, 6 and 8 h. Exposures at less than 4 h were insufficient, where the infrared spectral bands of nylon 6 were barely seen. The reaction time of 6 h was found to be optimal since a more prolonged heating for 8 h did not provide an evident further increase in polyamide content. The effect of stoichiometry was studied by varying the weight ratio of DA-MWNTs to epsilon-caprolactam from 1:0.1 to 1:1. The ratios 1:0.1 and 1:0.2 were too high, since they did not provide the amount of epsilon-caprolactam necessary to form the composites with at least 20% content of nylon 6. Starting with the ratio of 1:0.3, the infrared band intensities qualitatively stabilized and did not show dramatic variations. The use of reagent ratios of 1:0.3 to 1:0.7 might be especially appropriate for preparing the composites targeted to biomedical applications, whereas higher weight ratios are expected to increase the content of undesirable monomer impurities.

  17. Simultaneously fabrication of free and solidified N, S-doped graphene quantum dots via a facile solvent-free synthesis route for fluorescent detection.

    Science.gov (United States)

    Xia, Chang; Hai, Xin; Chen, Xu-Wei; Wang, Jian-Hua

    2017-06-01

    A facile one-step solvent-free synthesis approach is proposed for the simultaneous fabrication of free and solidified N, S-doped graphene quantum dots (N, S-GQDs) by using citric acid as precursor and L-cysteine as dopant. Graphene nucleus is firstly formed via the intermolecular dehydration of citric acid. N and S are then incorporated into the graphene structure by attacking the margin of graphene nucleus. The cross-linking among the graphene nucleus via the intermolecular condensation leads to the generation of free N, S-GQDs, while the intermolecular amidation between L-cysteine molecules and graphene nucleuses contributes to the solid-state fluorescence graphene quantum dots (SSF-GQDs). The free N, S-GQDs exhibit favorable photoluminescence behaviors such as high fluorescent quantum yield of 74.5%, stable photoluminescence within a wide range of pH and high tolerance to external ionic strength of up to 1.0molL -1 NaCl, making it excellent fluorescence probe for the sensitive detection of Fe 3+ with a linear range of 0.01-3μM and a detection limit of 3.3nM. The solidification of GQDs prevents the aggregation of GQDs efficiently and offers the solidified N, S-GQDs yellow-green fluorescence, with a fluorescence quantum yield of 10.6%. This proposed protocol provides a novel avenue to fabricate diverse fluorescent graphene materials for different practical applications. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. New Trend for Acceleration Solid Phase Extraction Process Based on Using Magnetic Nano-adsorbents along with Surface Functionalization through Microwave Assisted Solvent-free Technique.

    Science.gov (United States)

    Ahmed, Salwa A; Soliman, Ezzat M

    2015-01-01

    The use of a microwave assisted solvent-free technique for silica coating of iron magnetic nanoparticles (Fe3O4-MNPs) and their functionalization with three aliphatic diamines: 1,2-ethylenediamine (1,2EDA), 1,5-pentanediamine (1,5PDA) and 1.8-octanediamine (1,8-ODA), were successfully achieved in a very short time. Only 60 min were needed for the nano-adsorbent modification as compared with more than 1000 min using conventional methods under reflux conditions. Their surface characteristics (observed by TEM, XRD and FT-IR), in addition to Cu(II) adsorption capacities (1.805, 1.928 and 2.116 mmol g(-1)) and time of equilibration (5 s) were almost the same. Thus, the time required to accomplish the solid phase extraction process is greatly reduced. On the other hand, the phenomenon of the fast equilibration kinetics was successfully extended on using the functionalized aliphatic diamines magnetic nano-adsorbents as precursors for further microwave treatment. Three selective magnetic nano-adsorbents (Fe3O4-MNPs-SiO2-1,2EDA-3FSA, Fe3O4-MNPs-SiO2-1,5PDA-3FSA and Fe3O4-MNPs-SiO2-1,8ODA-3FSA) were obtained via the reaction with 3-formayl salicylic acid (3FSA) as a selective reagent for Fe(III). At 5 s contact time, they exhibited maximum Fe(III) uptake equal to 4.512, 4.987 and 5.367 mmol g(-1), respectively. Furthermore, modeling of values of metal uptake capacity obtained at different shaking time intervals supports pseudo-second order kinetics.

  19. Structure factor of blends of solvent-free nanoparticle-organic hybrid materials: density-functional theory and small angle X-ray scattering.

    Science.gov (United States)

    Yu, Hsiu-Yu; Srivastava, Samanvaya; Archer, Lynden A; Koch, Donald L

    2014-12-07

    We investigate the static structure factor S(q) of solvent-free nanoparticle-organic hybrid materials consisting of silica nanocores and space-filling polyethylene glycol coronas using a density-functional theory and small angle X-ray scattering measurements. The theory considers a bidisperse suspension of hard spheres with different radii and tethered bead-spring oligomers with different grafting densities to approximate the polydispersity effects in experiments. The experimental systems studied include pure samples with different silica core volume fractions and the associated mean corona grafting densities, and blends with different mixing ratios of the pure samples, in order to introduce varying polydispersity of corona grafting density. Our scattering experiments and theory show that, compared to the hard-sphere suspension with the same core volume fraction, S(q) for pure samples exhibit both substantially smaller values at small q and stronger particle correlations corresponding to a larger effective hard core at large q, indicating that the tethered incompressible oligomers enforce a more uniform particle distribution, and the densely grafted brush gives rise to an additional exclusionary effect between the nanoparticles. According to the theory, polydispersity in the oligomer grafting density controls the deviation of S(q) from the monodisperse system at smaller q, and the interplay of the enhanced effective core size and the entropic attraction among the particles is responsible for complex variations in the particle correlations at larger q. The successful comparison between the predictions and the measurements for the blends further suggests that S(q) can be used to assess the uniformity of grafting density in polymer-grafted nanoparticle materials.

  20. Ionic Liquid-Silica Precursors via Solvent-Free Sol-Gel Process and Their Application in Epoxy-Amine Network: A Theoretical/Experimental Study.

    Science.gov (United States)

    Perchacz, Magdalena; Donato, Ricardo Keitel; Seixas, Leandro; Zhigunov, Alexander; Konefał, Rafał; Serkis-Rodzeń, Magdalena; Beneš, Hynek

    2017-05-17

    This work describes the solvent-free sol-gel synthesis of epoxy-functionalized silica-based precursors in the presence of 1-butyl-3-methylimidazolium-based ionic liquids (ILs) containing different anions: chloride (Cl - ) and methanesulfonate (MeSO 3 - ). The IL-driven sol-gel mechanisms were investigated in detail using experimental characterizations ( 29 Si NMR and ATR FTIR spectroscopy) and a theoretical computational method based on density functional theory (DFT). We observed complex IL influence on both hydrolysis and condensation steps, involving especially H-bonding and Coulomb coupling stabilization of the process intermediates. The obtained IL-silica precursors and their further xerogels were widely characterized (rheology measurements, MALDI TOF, 29 Si NMR, ATR FTIR, and DFT simulation), which allowed observation of their precise silica structures and established their most energetically favorable conformations. The detected silica structures were dependent on the IL type and varied from highly condensed 3D cage-like to branched ladder-like and cyclic ones. The application of prepared IL-silica precursors as reinforcing additives into the epoxy-amine network led to an improvement in the organic/inorganic interphase interactions through chemical and physical bonding. Uniform and well-dispersed silica aggregates, in the size of ∼30 nm, were formed when ≤6.8 wt % of each IL-silica precursor was applied into the epoxy-amine network. The use of imidazolium-based ILs contributed to a significant improvement in thermomechanical properties of hybrids and reduced their UV absorption ability compared to that of the reference matrix. All hybrids exhibited an increase in energy to break (up to ∼53%), elongation at break (up to ∼43%), shear storage modulus in the rubbery region (up to 4 times), and thermo-oxidative stability.

  1. Structure factor of blends of solvent-free nanoparticle–organic hybrid materials: density-functional theory and small angle X-ray scattering

    KAUST Repository

    Yu, Hsiu-Yu

    2014-09-15

    © the Partner Organisations 2014. We investigate the static structure factor S(q) of solvent-free nanoparticle-organic hybrid materials consisting of silica nanocores and space-filling polyethylene glycol coronas using a density-functional theory and small angle X-ray scattering measurements. The theory considers a bidisperse suspension of hard spheres with different radii and tethered bead-spring oligomers with different grafting densities to approximate the polydispersity effects in experiments. The experimental systems studied include pure samples with different silica core volume fractions and the associated mean corona grafting densities, and blends with different mixing ratios of the pure samples, in order to introduce varying polydispersity of corona grafting density. Our scattering experiments and theory show that, compared to the hard-sphere suspension with the same core volume fraction, S(q) for pure samples exhibit both substantially smaller values at small q and stronger particle correlations corresponding to a larger effective hard core at large q, indicating that the tethered incompressible oligomers enforce a more uniform particle distribution, and the densely grafted brush gives rise to an additional exclusionary effect between the nanoparticles. According to the theory, polydispersity in the oligomer grafting density controls the deviation of S(q) from the monodisperse system at smaller q, and the interplay of the enhanced effective core size and the entropic attraction among the particles is responsible for complex variations in the particle correlations at larger q. The successful comparison between the predictions and the measurements for the blends further suggests that S(q) can be used to assess the uniformity of grafting density in polymer-grafted nanoparticle materials. This journal is

  2. Microwave Assisted Convenient One-Pot Synthesis of Coumarin Derivatives via Pechmann Condensation Catalyzed by FeF3 under Solvent-Free Conditions and Antimicrobial Activities of the Products

    Directory of Open Access Journals (Sweden)

    Vahid Vahabi

    2014-08-01

    Full Text Available A rapid and efficient solvent-free one-pot synthesis of coumarin derivatives by Pechmann condensation reactions of phenols with ethyl acetoacetate using FeF3 as a catalyst under microwave irradiation is described. This one-pot synthesis on a solid inorganic support provides the products in good yields. The newly synthesized compounds were systematically characterized by IR, 1H-NMR, 13C-NMR, MS and elemental CHN analyses. The proposed solvent-free microwave irradiation method using the environmentally friendly catalyst FeF3 offers the unique advantages of high yields, shorter reaction times, easy and quick isolation of the products, excellent chemoselectivity, and a one-pot, green synthesis. The products were screened for antimicrobial activity, and the results showed that the compounds reacted against all the tested bacteria.

  3. Potassium Hydroxide Impregnated Alumina (KOH-Alumina) as a Recyclable Catalyst for the Solvent-Free Multicomponent Synthesis of Highly Functionalized Substituted Pyridazines and/or Substituted Pyridazin-3(2H)-ones under Microwave Irradiation.

    Science.gov (United States)

    Mecadon, Hormi; Myrboh, Bekington

    2011-01-01

    The work described herein employs potassium hydroxide impregnated alumina (KOH-alumina) as a mild, efficient, and recyclable catalyst for a one-pot solvent-free and environmentally safer synthesis of 3,4,6-triarylpyridazines and some substituted pyridazines from active methylene carbonyl species, 1,2-dicarbonyls, and hydrazine hydrate by microwave (MW) irradiation. The method offers highly convergent, inexpensive, and functionality-tolerable procedure for rapid access to important pyridazine compounds in good yields.

  4. Two New 1,1,3,3-Tetramethylguanidinium Halochromates (C5H14N3CrO3X (X: Cl, F: Efficient Reagents for Oxidation of Organic Substrates under Solvent-Free Conditions and Microwave Irradiation

    Directory of Open Access Journals (Sweden)

    Kıvılcım Şendıl

    2016-01-01

    Full Text Available Two new mild oxidizing agents 1,1,3,3-tetramethylguanidinium fluorochromate (TMGFC and 1,1,3,3-tetramethylguanidinium chlorochromate (TMGCC were prepared in high yields by reacting tetramethylguanidine with CrO3 and related acid. These reagents are suitable to oxidize various primary and secondary alcohols and oximes to the corresponding carbonyl compounds under solvent-free conditions and microwave irradiation.

  5. An Efficient Synthesis of 3,4-Dihydropyrimidin-2(1H-Ones and Thiones Catalyzed by a Novel Brønsted Acidic Ionic Liquid under Solvent-Free Conditions

    Directory of Open Access Journals (Sweden)

    Yonghong Zhang

    2015-02-01

    Full Text Available We report here an efficient and green method for Biginelli condensation reaction of aldehydes, β-ketoesters and urea or thiourea catalyzed by Brønsted acidic ionic liquid [Btto][p-TSA] under solvent-free conditions. Compared to the classical Biginelli reaction conditions, the present method has the advantages of giving good yields, short reaction times, near room temperature conditions and the avoidance of the use of organic solvents and metal catalyst.

  6. A Facile One-Pot Solvent-Free Synthesis of 1,2-Dihydro-1-arylnaphtho[1,2-e][1,3]oxazine-3-ones Catalyzed by Wet Cyanuric Chloride

    Directory of Open Access Journals (Sweden)

    Firouzeh Nemati

    2013-01-01

    Full Text Available A novel one-pot synthesis of 1,2-dihydro-1-arylnaphtho[1,2-e][1,3]oxazine-3-ones by condensation of a variety of aldehydes with β-naphthol and urea or thiourea in the presence of wet cyanuric chloride under solvent-free condition has been described. High yields, simple procedure, easy workup, short reaction times, and avoiding the use of organic solvent are the advantages of this green methodology.

  7. B2O3/Al2O3 as a new, highly efficient and reusable heterogeneous catalyst for the selective synthesis of β-enamino ketones and esters under solvent-free conditions

    OpenAIRE

    Chen,Jiu-Xi; Zhang,Chang-Fu; Gao,Wen-Xia; Jin,Hui-Le; Ding,Jin-Chang; Wu,Hua-Yue

    2010-01-01

    Boron oxide adsorbed on alumina (B2O3/Al2O3 ) has been found to be a new and highly efficient heterogeneous catalyst for the synthesis of β-enamino ketones and esters by the enamination of various primary and secondary amines with β-dicarbonyl compounds under solvent-free conditions. The important features of this methodology are broad substrate scope, high yield, no requirement of metal catalysts, high regio- and chemoselectivity and environmental friendliness. In addition, the cat...

  8. Brønsted acidic ionic liquid catalyzed an efficient and eco-friendly protocol for the synthesis of 2,4,5-trisubstituted-1H-imidazoles under solvent-free conditions

    Directory of Open Access Journals (Sweden)

    Janardhan Banothu

    2017-05-01

    Full Text Available A simple, highly efficient and eco-friendly protocol for the synthesis of 2,4,5-trisubstituted-1H-imidazoles via one-pot three component condensation of benzil/benzoin, aldehydes and ammonium acetate under solvent-free conditions has been achieved utilizing Brønsted acidic ionic liquid, (4-sulfobutyltris(4-sulfophenyl phosphonium hydrogen sulfate as catalyst. The remarkable features of this methodology are excellent yields in shorter reaction times, cleaner reaction profile, and environmentally benign nature, use of non-toxic, readily synthesizable, inexpensive and recyclable catalyst.

  9. β-cyclodextrin-polyurethane polymer: A neutral and eco-friendly heterogeneous catalyst for the one-pot synthesis of 1,4-dihydropyridine and polyhydroquinolien derivatives via Hantzsch reaction under solvent-free conditions

    Directory of Open Access Journals (Sweden)

    Kiasat Ali Reza

    2014-01-01

    Full Text Available An efficient synthesis of 1,4-dihydropyridine & polyhydroquinolien derivatives using b-Cyclodextrin-polyurethane polymer (β-CDPU as a stationary microvessel and neutral heterogeneous catalyst via a four component coupling of aldehydes, β-ketoester (2 mol and ammonium acetate under solvent-free conditions is described. Compared with the classical Hantzsch reaction, this new method has the advantages of good yield, short reaction time and methodological simplicity. β-CDPU was proved to be an efficient heterogeneous catalyst which could be easily handled and removed from the reaction mixture by simple filtration, and also recovered and reused without loss of reactivity.

  10. Synthesis and QSAR Study of (4-Oxo-3-aryl-3,4-dihydro-quinazolin-2-ylsulfanyl-propionic Acid arylidene/aryl-ethylidene-hydrazides via Microwave Assisted Solvent Free Reations

    Directory of Open Access Journals (Sweden)

    M. B. Deshmukh

    2004-01-01

    Full Text Available In the present work, s-alkylated derivatives of thio-quinazolinone were obtained using Methyl 2-chloro propionate via a solvent-free microwave-assisted method. The alkylated thio quinazolinones were further sequentially condensed with hydrazine hydrate and different aromatic aldehydes to get the hydrazides, which were studied for QSAR. The synthesized compounds were subjected to a prediction of biological activities. A software application (PASS was used for this purpose. . The relationship between structure and different biological activities was studied and the different derivatives were recommended for the screening of some specific activities like anti-tuberculosic, anti-mycobacterial & HDL cholesterol increasing activities.

  11. Synthesis, characterization and catalytic application of silica supported tin oxide nanoparticles for synthesis of 2,4,5-tri and 1,2,4,5-tetrasubstituted imidazoles under solvent-free conditions

    Directory of Open Access Journals (Sweden)

    Ashok V. Borhade

    2017-02-01

    Full Text Available Highly efficient and eco-friendly, one pot synthesis of 1,2,4,5-tetra substituted imidazoles and 2,4,5-trisubstituted imidazoles was reported under solvent free conditions using nanocrystalline silica supported tin oxide (SiO2:SnO2 as a catalyst with excellent yield. The present methodology offers several advantages such as mild reaction conditions, short reaction time, good yield, high purity of product, recyclable catalyst without a noticeable decrease in catalytic activity and can be used for large scale synthesis. The synthesized SiO2:SnO2 nanocrystalline catalyst was characterized by XRD, BET surface area and TEM techniques.

  12. Magnetic Nanoparticle Immobilized N-Propylsulfamic Acid as a Recyclable and Efficient Nanocatalyst for the Synthesis of 2H-indazolo[2,1-b]phthalazine-triones in Solvent-Free Conditions: Comparison with Sulfamic Acid

    Energy Technology Data Exchange (ETDEWEB)

    Rostami, Amin; Tahmasbi, Bahman; Yari, Ako [Univ. of Kurdistan, Sanandaj (Iran, Islamic Republic of)

    2013-05-15

    N-Propylsulfamic acid supported onto magnetic Fe{sub 3}O{sub 4} nanoparticles (MNPs-PSA) was used as an efficient and magnetically recoverable catalyst for synthesis of 2H-Indazolo[2,1-b]phthalazine-1,6,11(13H)-trione derivatives from the three-component, one-pot condensation reaction of phthalhydrazide, aromatic aldehydes and cyclic 1,3-diones, in good to excellent yields at 100 .deg. C under solvent-free conditions. The catalyst was easily separated with the assistance of an external magnetic field from the reaction mixture and reused for several consecutive runs without significant loss of its catalytic efficiency. In order to compare, the synthesis of 2H-Indazolo[2,1-b]phthalazine-1,6,11(13H)-trione derivatives in the presence of catalytic amount of sulfamic acid (SA) under same reaction condition was also reported.

  13. Molybdenum oxide supported on silica (MoO3/SiO2): an efficient and reusable catalyst for the synthesis of 1,8-dioxodecahydroacridines under solvent-free conditions

    International Nuclear Information System (INIS)

    Khojastehnezhad, A.; Vafaei, M.; Moeinpour, F.

    2014-01-01

    Silica supported molybdenum oxide (MoO 3 /SiO 2 ) was found to be and efficient, eco-friendly and heterogeneous catalyst for the multicomponent reaction of aromatic aldehydes, dimedone and ammonium acetate or aromatic amines under solvent-free conditions to afford the corresponding 1,8-dioxodecahydroacridines in high yields. The catalyst can be easily recovered and reused for several times without considerable loss of activity. Furthermore, the present method offers several advantages, such as an easy experimental and work-up procedures, short reaction times and good to excellent yields. For the characterization were used: Fourier transform infrared spectroscopy (Ft-IR), X-ray diffraction and scanning electron microscopy analyses. (Author)

  14. Molybdenum oxide supported on silica (MoO{sub 3}/SiO{sub 2}): an efficient and reusable catalyst for the synthesis of 1,8-dioxodecahydroacridines under solvent-free conditions

    Energy Technology Data Exchange (ETDEWEB)

    Khojastehnezhad, A.; Vafaei, M. [Islamic Azad University, Mashhad Branch, Department of Chemistry, Mashhad (Iran, Islamic Republic of); Moeinpour, F., E-mail: akhojastehnezhad@yahoo.com [Islamic Azad University, Bandar Abbas Branch, Department of Chemistry, Bandar Abbas (Iran, Islamic Republic of)

    2014-07-01

    Silica supported molybdenum oxide (MoO{sub 3}/SiO{sub 2}) was found to be and efficient, eco-friendly and heterogeneous catalyst for the multicomponent reaction of aromatic aldehydes, dimedone and ammonium acetate or aromatic amines under solvent-free conditions to afford the corresponding 1,8-dioxodecahydroacridines in high yields. The catalyst can be easily recovered and reused for several times without considerable loss of activity. Furthermore, the present method offers several advantages, such as an easy experimental and work-up procedures, short reaction times and good to excellent yields. For the characterization were used: Fourier transform infrared spectroscopy (Ft-IR), X-ray diffraction and scanning electron microscopy analyses. (Author)

  15. Nano crystalline ZnO catalyzed one pot three-component synthesis of 7-alkyl-6H,7H- naphtho[1',2':5,6]pyrano[3,2-c] chromen-6-ones under solvent-free conditions

    Directory of Open Access Journals (Sweden)

    M. J. Piltan

    2016-08-01

    Full Text Available In the present paper, an efficient one-pot synthesis of 7-alkyl-6H,7H-naphtho[1',2':5,6]pyrano[3,2-c]chromen-6-ones is described by three-component reaction of β-naphthol, aromatic aldehydes and 4-hydroxycoumarin using ZnO nanoparticles under solvent-free conditions. The present method provides a novel and efficient procedure for the synthesis of chromene derivatives with some advantageous such as short reaction times, easy workup, high yields, wide range of products, reusability of the catalyst, little catalyst loading and green conditions in the presence of ZnO nanoparticles (7 mol% at 110 ºC.

  16. Solvent-free one-pot cyclization and acetylation of chalcones: Synthesis of some 1-acetyl pyrazoles and spectral correlations of 1-(3-(3,4-dimethylphenyl-5-(substituted phenyl-4,5-dihydro-1H-pyrazole-1-yl ethanones

    Directory of Open Access Journals (Sweden)

    G. Thirunarayanan

    2016-11-01

    Full Text Available One-pot synthesis of some 1N-acetyl pyrazoles including 1-(3-(3,4-dimethylphenyl-5-(substituted phenyl-4,5-dihydro-1H-pyrazole-1-yl ethanones has been achieved via solvent-free microwave irradiation using substituted chalcones, hydrazine hydrate and acetic anhydride in the presence of catalytic amount of fly-ash: PTS catalyst. The yield of these 1N-acetyl pyrazole derivatives is more than 75%. The synthesized 1N-acetyl pyrazoline derivatives were characterized by their physical constants and spectral data. The infrared spectral νCN and CO (cm−1 frequencies, NMR chemical shifts (δ, ppm of Ha, Hb, Hc, CH3 protons, CN, CO and CH3 carbons of 1-(3-(3,4-dimethylphenyl-5-(substituted phenyl-4,5-dihydro-1H-pyrazole-1-yl ethanones have been assigned and correlated with Hammett substituent constants and Swain-Lupton’s parameters using single and multi-regression analysis. From the results of statistical analyses, the effect of substituents on the above group frequencies and chemical shifts of the acetylated pyrazoles were discussed.

  17. Mechanochemical solvent-free in situ synthesis of drug-loaded {Cu2(1,4-bdc)2(dabco)}n MOFs for controlled drug delivery

    Science.gov (United States)

    Nadizadeh, Zahra; Naimi-Jamal, M. Reza; Panahi, Leila

    2018-03-01

    In the present study, ibuprofen-loaded nano metal-organic frameworks (NMOFs) {Cu2(1,4-bdc)2(dabco)}n and {Cu2(1,4-bdc-NH2)2(dabco)}n (bdc=benzenedicarboxylic acid, and dabco=diazabicyclooctane) were synthesized by ball-milling at room temperature in 2 h. The produced drug-loaded Cu-NMOFs were studied as ibuprofen drug delivery system and exhibited well-defined drug release behavior, exceptionally high drug loading capacities and the ability to entrap the model drug. The loading efficiency for ibuprofen was determined about 50.54% and 50.27%, respectively. The drug release of NMOFs was also monitored, and all of the loaded drug was released in 1 day. The NMOFs were characterized by FT-IR spectroscopy, X-ray powder diffraction (XRPD), thermogravimetric analysis (TGA), SEM (scanning electron microscopy), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), inductively coupled plasma (ICP), UV-vis spectroscopy and N2 adsorption porosimetry (BET&BJH).

  18. Solvent-free synthesis of Cu2ZnSnS4 nanocrystals: a facile, green, up-scalable route for low cost photovoltaic cells.

    Science.gov (United States)

    Park, Bo-In; Hwang, Yoonjung; Lee, Seung Yong; Lee, Jae-Seung; Park, Jong-Ku; Jeong, Jeunghyun; Kim, Jin Young; Kim, BongSoo; Cho, So-Hye; Lee, Doh-Kwon

    2014-10-21

    Efficient Cu2ZnSnSe4 (CZTSe) solar cells were fabricated with a simple, environmentally friendly, and scalable synthetic method for Cu2ZnSnS4 (CZTS) nanocrystals. CZTS nanoparticles were mechanochemically synthesized from elemental precursors on a relatively large scale (∼20 g), during which no solvents or additives were used, thus alleviating the complex process of particle synthesis. An analysis of the time evolution of the crystalline phase and morphology of precursor powders revealed that the formation of the CZTS compound was completed in 0.5 h once initiated, suggesting that the mechanochemically induced self-propagating reaction prevails. CZTS ink was prepared by dispersing the as-synthesized nanoparticles in an environmentally benign solvent (160 mg mL(-1) in ethanol) without using any additives, after which it was cast onto Mo-coated glass substrates by a doctor-blade method. Subsequent reactive annealing at 560 °C under a Se-containing atmosphere resulted in substantial grain growth along with the nearly complete substitution of Se. The CZTSe solar cells therefrom exhibited power conversion efficiency levels as high as 6.1% (based on the active area, 0.44 cm(2)) with a relatively high open-circuit voltage (0.42 V) in comparison with the bandgap energy of 1.0 eV.

  19. Enantioselective solvent-free Robinson annulation reactions

    Indian Academy of Sciences (India)

    Unknown

    asymmetric annulation reactions in a solid–liquid phase reaction in the absence of solvents to effect an asymmetric synthesis is an important step forward towards cleaner synthesis 2. Environmental and economic pressures are now forcing the chemical community to search for more efficient ways of performing chemical ...

  20. SHORT COMMUNICATION A SOLVENT FREE AND SELECTIVE ...

    African Journals Online (AJOL)

    Preferred Customer

    On the other hand, trityl ethers show good stability in mild acidic or basic media which make them good ... procedure for the preparation of trityl ethers involves treatment of alcohols with trityl chlorides in the presence of ..... Financial support for this work by the Research Council of Malek-Ashtar University of. Technology ...

  1. Solvent-Free Synthesis of Chalcones

    Science.gov (United States)

    Palleros, Daniel R.

    2004-01-01

    The synthesis of twenty different chalcones in the absence of solvent is presented. The results indicated that out of the twenty different chalcones investigated seventeen can be obtained in a matter of minutes by mixing the corresponding benzaldehyde and acetophenone in the presence of solid NaOH in a mortar with pestle.

  2. Enantioselective solvent-free Robinson annulation reactions

    Indian Academy of Sciences (India)

    The enantioselective cyclization of the prochiral cyclic substrates 1 to 7 and 26, can be carried out in the neat using -proline as catalyst. The substrates 18 to 22 and 27 could not be cyclized with S-proline but could be cyclized with a mixture of -phenylalanine and -camphorsulphonic acid. The enantioselective ...

  3. SHORT COMMUNICATION A SOLVENT FREE AND SELECTIVE ...

    African Journals Online (AJOL)

    Preferred Customer

    Selective protection of 1,2-propanediol (1n) with dimethoxytrityl chloride and triethylamine under microwave irradiation. In a beaker, a mixture of dimethoxytrityl chloride (4.06 g, 12 mmol) and triethylamine (3.5 mL, 25 mmol) was taken and 1,2-propanediol 1n (0.76 g, 10 mmol) was added to this mixture and was irradiated ...

  4. Solvent-free one-step photochemical hydroxylation of benzene derivatives by the singlet excited state of 2,3-Dichloro-5,6-dicyano-p-benzoquinone acting as a super oxidant.

    Science.gov (United States)

    Ohkubo, Kei; Hirose, Kensaku; Fukuzumi, Shunichi

    2015-02-09

    Photoinduced hydroxylation of neat deaerated benzene to phenol occurred under visible-light irradiation of 2,3-dichloro-5,6-dicyano-p-benzoquinone (DDQ), which acts as a super photooxidant in the presence of water. Photocatalytic solvent-free hydroxylation of benzene derivatives with electron-withdrawing substituents such as benzonitrile, nitrobenzene, and trifluoromethylbenzene used as neat solvents has been achieved for the first time by using DDQ as a super photooxidant to yield the corresponding phenol derivatives and 2,3-dichloro-5,6-dicyanohydroquinone (DDQH2 ) in the presence of water under deaerated conditions. In the presence of dioxygen and tert-butyl nitrite, the photocatalytic hydroxylation of neat benzene occurred with DDQ as a photocatalyst to produce phenol. The photocatalytic reactions are initiated by oxidation of benzene derivatives with the singlet and triplet excited states of DDQ to form the corresponding radical cations, which associate with benzene derivatives to produce the dimer radical cations, which were detected by the femto- and nanosecond laser flash photolysis measurements to clarify the photocatalytic reaction mechanisms. Radical cations of benzene derivatives react with water to yield the OH-adduct radicals. On the other hand, DDQ(.) (-) produced by the photoinduced electron transfer from benzene derivatives reacts with the OH-adduct radicals to yield the corresponding phenol derivatives and DDQH2 . DDQ is recovered by the reaction of DDQH2 with tert-butyl nitrite when DDQ acts as a photocatalyst for the hydroxylation of benzene derivatives by dioxygen. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Zr(HSO{sub 4}){sub 4} as an efficient catalyst for the preparation of 10-aryl-6,8-dimethyl-6,10dihydro-5-oxa-6,8-diazaanthra[2,3-d][1,3]dioxole-7 ,9-diones under solvent-free conditions

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Jiangli [Xinxiang Medical University, Xinxiang, Henan (China). Dept. Psychology of the Second Affiliated; Li, Wei Lin; Wu, Li Qiang [Xinxiang Medical University, Xinxiang, Henan (China). School of Pharmacy

    2011-07-01

    A one-pot three-component condensation of 3,4-methylenedioxyphenol, aromatic aldehydes, and 1,3-dimethylbarbituric acid, efficiently promoted in the presence of Zr(HSO{sub 4}){sub 4} under solvent free conditions, produced 10-aryl-6,8-dimethyl-6,10-dihydro-5-oxa-6,8-diazaanthra[2,3-d][1,3] dioxole-7,9-diones. The method offers several advantages including simple, easy and clean work-up procedure, relatively short reaction times and good to high yields of the products. (author)

  6. Nano Fe{sub 2}O{sub 3,} clinoptilolite and H{sub 3}PW{sub 12}O{sub 40} as efficient catalysts for solvent-free synthesis of 5(4H)-isoxazolone under microwave irradiation conditions

    Energy Technology Data Exchange (ETDEWEB)

    Fozooni, Samieh, E-mail: samieh.fozooni@uk.ac.ir, E-mail: s_fozooni@yahoo.com [Shahid Bahonar University, Kerman (Iran, Islamic Republic of). Mining Engineering Department. Zarand High Education Center; Hosseinzadeh, Nasrin Gholam; Akhgar, Mohammad Reza [Islamic Azad University, Kerman (Iran, Islamic Republic of). Department of Chemistry; Hamidian, Hooshang [Payame Noor University (PNU), Tehran (Iran, Islamic Republic of). Department of Chemistry

    2013-10-15

    A quick and solvent-free approach involving the exposure of neat reactants to microwave irradiation in conjunction with the use of clinoptilolite, H{sub 3}PW{sub 12}O{sub 40} and Fe{sub 2}O{sub 3} nanoparticle catalysts is described. In this work, condensation of hydroxylamine hydrochloride, sodium acetate, acetoacetic or benzoyl acetic ethyl ester and appropriate aldehydes by employing catalysts gave 5(4H)-isoxazolone only in one step. Catalyst amount, temperature effects and catalysts reusability were monitored. Among the catalysts, Fe{sub 2}O{sub 3} nanoparticles had better performance than other catalysts from viewpoint of yield and reaction time. The present protocol offers several advantages, such as short reaction time, reasonable yield, mild reaction condition and recycling catalysts with a very easy workup. (author)

  7. Sulfonic acid-functionalized silica-coated magnetic nanoparticles as an efficient reusable catalyst for the synthesis of 1-substituted 1H-tetrazoles under solvent-free conditions.

    Science.gov (United States)

    Naeimi, Hossein; Mohamadabadi, Samaneh

    2014-09-14

    Regarding green chemistry goals, silica-coated magnetite nanoparticles open up a new avenue to introduce a very useful and efficient system for facilitating catalyst recovery in different organic reactions. Therefore, in this paper the preparation of sulfonic acid-functionalized silica-coated magnetic nanoparticles with core-shell structure (Fe3O4@silica sulfonic acid) is presented by using Fe3O4 spheres as the core and silica sulfonic acid nanoparticles as the shell. The catalyst was characterized by infrared spectroscopy, scanning electron microscopy, X-ray diffraction analysis, dynamic light scattering, thermogravimetric analysis and vibrating sample magnetometry. Nanocatalyst can be recovered using an external magnet and reused for subsequent reactions 6 times without noticeable deterioration in catalytic activity.

  8. H-ferrierite zeolite: As an effective and reusable heterogeneous catalyst for synthesis of 1,5-benzothiazepine under solvent free condition and 1,3-dipolar cycloaddition in water

    Directory of Open Access Journals (Sweden)

    Thoraya A. Farghaly

    2017-05-01

    Full Text Available An efficient synthesis of new derivatives of 1,5-benzothiazepine has been developed by the reaction of various chalcones (1,3-diaryl-2-propenones with 2-amino-thiophenol in the presence of H-ferrierite zeolite as acidic catalyst without solvent. In addition, 1,3-dipolar cycloaddition of hydrazonoyl chlorides on CN bond of 1,5-benzothiazepines in water in the presence of Na2CO3/THAC as a base catalyst afforded 1,2,4-triazolo[3,4-d][1,5]benzothiazepines. The structure of all the newly synthesized compounds was established on the basis of spectral data (Mass, IR, 1H NMR, 13C NMR and elemental analysis.

  9. Bio-refinery of orange peels waste: a new concept based on integrated green and solvent free extraction processes using ultrasound and microwave techniques to obtain essential oil, polyphenols and pectin.

    Science.gov (United States)

    Boukroufa, Meryem; Boutekedjiret, Chahrazed; Petigny, Loïc; Rakotomanomana, Njara; Chemat, Farid

    2015-05-01

    In this study, extraction of essential oil, polyphenols and pectin from orange peel has been optimized using microwave and ultrasound technology without adding any solvent but only "in situ" water which was recycled and used as solvent. The essential oil extraction performed by Microwave Hydrodiffusion and Gravity (MHG) was optimized and compared to steam distillation extraction (SD). No significant changes in yield were noticed: 4.22 ± 0.03% and 4.16 ± 0.05% for MHG and SD, respectively. After extraction of essential oil, residual water of plant obtained after MHG extraction was used as solvent for polyphenols and pectin extraction from MHG residues. Polyphenols extraction was performed by ultrasound-assisted extraction (UAE) and conventional extraction (CE). Response surface methodology (RSM) using central composite designs (CCD) approach was launched to investigate the influence of process variables on the ultrasound-assisted extraction (UAE). The statistical analysis revealed that the optimized conditions of ultrasound power and temperature were 0.956 W/cm(2) and 59.83°C giving a polyphenol yield of 50.02 mgGA/100 g dm. Compared with the conventional extraction (CE), the UAE gave an increase of 30% in TPC yield. Pectin was extracted by conventional and microwave assisted extraction. This technique gives a maximal yield of 24.2% for microwave power of 500 W in only 3 min whereas conventional extraction gives 18.32% in 120 min. Combination of microwave, ultrasound and the recycled "in situ" water of citrus peels allow us to obtain high added values compounds in shorter time and managed to make a closed loop using only natural resources provided by the plant which makes the whole process intensified in term of time and energy saving, cleanliness and reduced waste water. Copyright © 2014 Elsevier B.V. All rights reserved.

  10. Highly efficient solvent-free synthesis of pyranopyrazoles by a ...

    Indian Academy of Sciences (India)

    ... of dihydropyrano[2,3-c]pyrazole derivatives is developed by a four component reaction of various benzaldehydes, ethyl acetoacetate, hydrazine hydrate and malononitrile in the presence of 3-methyl-1-(4-sulphonic acid)butylimidazolium hydrogen sulphate [(CH2)4SO3HMIM][HSO4], an acidic ionic liquid and as a catalyst, ...

  11. Solvent-free microwave-mediated Michael addition reactions

    Indian Academy of Sciences (India)

    Unknown

    Bergmann E D, Ginsburg D and Pappo R 1959 Orga- nic React. 10 179. 4. House H O 1972 Modern synthetic reactions (ed.) W A Benjamin (New York: Amsterdam) p. 595. 5. Rosnati V, Saba A and Salimbeni A 1981 Tetrahe- dron Lett. 22 167. 6. Toda F, Takumi H, Nagami M and Tanaka K 1998. Hetrocycles 47 469. 7.

  12. dichlorodiazene dioxides using levulinic acid under solvent-free ...

    Indian Academy of Sciences (India)

    Administrator

    The procedure involves addition of NOCl generated in situ by the reaction of AcOH–HCl. (3 :1) with amyl nitrite to alkenes and treating the α-chloronitroso compounds obtained as dimers with levulinic acid in presence of a few drops of 6N HCl, the latter being a three-step domino reaction, in which the first is dissociation of ...

  13. solvent-free synthesis of azomethines, spectral correlations

    African Journals Online (AJOL)

    B. S. Chandravanshi

    especially in the medicinal and pharmaceutical fields. Now-a-days the development and synthesis of novel Schiff's base derivatives as potential chemotherapeutics still attract the attention of organic and medicinal chemists [2, 3]. Many studies reported the biological activities of Schiff's bases, including their anticancer, ...

  14. Highly efficient solvent-free synthesis of pyranopyrazoles by a ...

    Indian Academy of Sciences (India)

    organic synthesis and medicinal chemistry because they are one-pot processes bringing together three or more components and show high atom economy and high selectivity.1,2 MCRs have great contribution in con- vergent synthesis of complex and important organic molecules from simple and readily available starting.

  15. Novel, Solvent-Free, Single Ion Conductive Polymer Electrolytes

    National Research Council Canada - National Science Library

    Florjanczyk, Zbigniew

    2008-01-01

    This project report concerns studies on the synthesis of new polymer electrolytes for application in lithium and lithium-ion batteries characterized by limited participation of anions in the transport...

  16. Solvent-free microwave-mediated Michael addition reactions

    Indian Academy of Sciences (India)

    Facile Michael addition of active methylene compounds to ,-unsaturated carbonyl compounds takes place on the surface of potassium carbonate under microwave irradiation. Further studies on microwave-mediated Robinson annulations reveal a convenient and facile method for condensation of chalcone with ...

  17. An efficient synthesis of quinolines under solvent-free conditions

    Indian Academy of Sciences (India)

    Unknown

    reaction was conducted in anhydrous ethanol under an atmosphere of nitrogen using SnCl2 as the reduc- tant (e.g. –NO2 to NH2) and ZnCl2 as the facilitator of enolate formation .... conversion was less than 100%. Small amounts of starting materials were recovered after each reac- tion. Temperature of the reaction mixture ...

  18. Solvent free lipase catalyzed synthesis of butyl caprylate

    Indian Academy of Sciences (India)

    To achieve maximum conversion theoptimum parameters thus established include; temperature 60 ◦C, mole ratio of caprylic acid and butanol as 1:2, lipase loading 2% (w/v), 250 rpm speed of agitation and 4g of molecular sieves. The immobilized enzyme wasalso recycled and reused for 7 cycles with only 30% loss from its ...

  19. Solvent-free microwave-assisted synthesis of oxadiazoles ...

    Indian Academy of Sciences (India)

    TECS

    tion mixture was refluxed for 4–5 h on an oil bath, the contents were cooled to room temperature and poured onto crushed ice. It was then neutralized by. 5% sodium bicarbonate solution. The solid that separated was collected by filtration through a. Büchner funnel and dried. Further purification was done by recrystallization ...

  20. Efficient, green and solvent-free synthesis of tetrasubstituted ...

    Indian Academy of Sciences (India)

    Stellman J M Encyclopaedia of occupational health and safety, vol 3 International Labour Office, Geneva,. 1998. 44. (a) Corma A and Garcia H 2006 Adv. Synth. Catal. 348 1391; (b) Zhang L-F and Yang S-T 2009 Russian in Zh. Organicheskoi Khimii 4(1) 25; (c) Darabi H R,. Poorheravi M R, Aghapoor K, Mirzaee A, ...

  1. INVESTIGATION OF THE SOLVENT FREE ISOMERISATION OF cis ...

    African Journals Online (AJOL)

    Preferred Customer

    diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and the results showed that the reaction was first order. A thermomicroscopic investigation of cis-Mo(CO)4[P(m-tolyl)3]2 revealed that the isomerisation was surface-initiated. KEY WORDS. KEY WORDS: Solventless reactions, Molybdenum, Isomerisation, ...

  2. A Solvent-free Synthesis of Polyhydroquinolines via Hantzsch ...

    African Journals Online (AJOL)

    A simple and efficient procedure for the synthesis of polyhydroquinolines was developed, involving a one-pot four-component Hantzsch condensation of aromatic aldehydes, 1,3-cyclohexanediones, alkyl acetoacetate and ammonium acetate in the presence of a catalytic amount of nanomagnetic-supported sulfonic acid ...

  3. Solvent-free microwave-mediated Michael addition reactions

    Indian Academy of Sciences (India)

    Unknown

    Yield: 789 mg (93%; pale yellow viscous liq- uid). Acknowledgments. SJ thanks Council of Scientific and Industrial Res- earch for a fellowship. HSPR thanks the UGC-SAP program, DST-FIST program and CSIR, India, for financial support. We thank Professor A Srikrishna,. IISc, for recording spectral data and helpful discus-.

  4. SOLVENT-FREE SYNTHESIS OF XANTHENE DERIVATIVES BY ...

    African Journals Online (AJOL)

    Preferred Customer

    Due to the numerous advantages associated with these eco-friendly and green catalysts [11-16], HPAs and their salts have been explored as powerful, efficient and eco-friendly catalysts in organic reactions such as liquid phase bromination of phenol [17], chemoselective oxathioacetalization of carbonyl compounds [18],.

  5. Complex phase behavior in solvent-free nonionic surfactants

    DEFF Research Database (Denmark)

    Hillmyer, M.A.; Bates, F.S.; Almdal, K.

    1996-01-01

    Unsolvated block copolymers and surfactant solutions are ''soft materials'' that share a common set of ordered microstructures, A set of polyethyleneoxide-polyethylethylene (PEG-PEE) block copolymers that are chemically similar to the well-known alkane-oxyethylene (C(n)EO(m)) nonionic surfactants...... was synthesized here. The general phase behavior in these materials resembles that of both higher molecular weight block copolymers and lower molecular weight nonionic surfactant solutions. Two of the block copolymers exhibited thermally induced order-order transitions and were studied in detail by small...

  6. Novel, Solvent-Free, Single Ion Conductive Polymer Electrolytes

    Science.gov (United States)

    2008-01-20

    difluoroalkoxyborane compounds were applied as additives to solid polymeric electrolytes comprising PEO as polymer matrix and 10 mol. % of lithium salt. In all...compounds and on composite electrolytes with supramolecular anion receptors. 15. SUBJECT TERMS EOARD, Power, Electrochemistry...BF3 33 II. COMPOSITE ELECTROLYTES WITH SUPRAMOLECULAR ANION RECEPTORS 43 II.1. Introduction 39 II.2 Experimental 44 II.3 Results and discussion

  7. One-pot Solvent-free Catalytic Dimerization Reaction of ...

    Indian Academy of Sciences (India)

    : 67149-67346, Kermanshah, Iran; Medical Biology Research Center, Kermanshah University of Medical Sciences, Kermanshah, Iran; Chemistry Department, Science Faculty, Islamic Azad University, Arak Branch, P.O. Box 38135-567, Arak, ...

  8. Organic Synthesis under Solvent-free Condition. An Environmentally ...

    Indian Academy of Sciences (India)

    compound classes that undergo photochemical reactions. It should also be noted that the process vital to the occurrence and continuation of life on earth is a complex sequence of photo- chemical reactions called photosynthesis. Exposing a compound to sunlight in solid state is one of the oldest reactions to be carried out ...

  9. Solvent-free microwave-assisted synthesis of oxadiazoles ...

    Indian Academy of Sciences (India)

    TECS

    histidine and purines which comprise many of the most important bases in nucleic acids. Imidazole de- rivatives possess a broad spectrum of pharmacological activities such as anticonvulsant,8 anti-parkinson9 and monoamineoxidase (MAO) inhibitory10 activity. The oxadiazole chemistry has been developed ex- tensively ...

  10. Solvent free lipase catalyzed synthesis of butyl caprylate

    Indian Academy of Sciences (India)

    MEERA T SOSE

    2017-11-10

    Nov 10, 2017 ... C, mole ratio of caprylic acid and butanol as 1:2, lipase loading 2% (w/v), 250 rpm speed of agitation and 4g of molecular sieves. The immobilized enzyme was also recycled and reused for 7 cycles with only 30% loss from its initial activity. The thermodynamic parameters at different temperatures were also ...

  11. Efficient, green and solvent-free synthesis of tetrasubstituted ...

    Indian Academy of Sciences (India)

    optical materials, and photographic materials.7 In addi- tion, these compounds are employed in agriculture e.g., herbicides, pesticides, fungicides,8 and plant growth regulators.9 Therefore, the synthesis of these imidazole derivatives has attracted much attention in organic synthesis. Different methods have been developed.

  12. An efficient synthesis of quinolines under solvent-free conditions

    Indian Academy of Sciences (India)

    Unknown

    (a) Cho C S, Kim B T, Kim T-J and Shim S C 2001. Chem. Commun. 2576; (b) McNaughton B R and. Miller B L 2003 Org. Lett. 5 4257 (c) Ranu B C, Ha- jra A, Dey S S and Jana U 2003 Tetrahedron 59 813;. (d) Song S J, Cho S J, Park D K, Kwon T W and. Jenekhe S A 2003 Tetrahedron Lett. 44 255; (e) Cho. C S, Kim B T ...

  13. Organic Synthesis under Solvent-free Condition. An Environmentally ...

    Indian Academy of Sciences (India)

    mately also adopt ordered structure. The orientational require- ments of the substrate molecules in the crystalline state have provided excellent opportunities to achieve high degree of stereo selectivity in the products. This has made it possible to synthesize chiral molecules from prochiral ones either by com- plexation with ...

  14. A Solvent-free Synthesis of Polyhydroquinolines via Hantzsch ...

    African Journals Online (AJOL)

    NICO

    physical, electronic and magnetic properties. The field of nanomagnetic particles is a subset of nanomaterials. The applications for these materials ..... 4 A. Andrade, R. Ferreira, J. Fabris and R. Domingues, Coating Nano- magnetic Particles for Biomedical Applications, 2011, Intech, DOI: 10.5772/19519. 5 M. Gawande, A.

  15. Solvent free amorphisation for pediatric formulations (minitablets) using mesoporous silica

    DEFF Research Database (Denmark)

    Monsuur, Fred; Choudhari, Yogesh; Reddy, Upendra

    2016-01-01

    Introduction: Most silica based amorphisation strategies are using organic solvent loading methods. Towards pediatric formulations this is creating concerns. With this in mind the development of a dry amorphisation strategy was the focus of this study. The high internal surface area of mesoporous...... silica gel is densely crowded with silanol groups, which can provide hydrogen-bonding possibilities with a drug, potentially resulting in amorphisation. Purpose: Amorphous drugs provide an advantage in solubility; however, their low physical stability always remained concern. Additional there was a need...... to understand the mechanism and variables of dry amorphisation. Method: Ibuprofen (IBU) and Syloid® silica at different ratios were co-milled at variable milling times between 1 and 90 min. The interaction with; and amorphisation of IBU; on Syloid® silica was analyzed using SEM, FTIR, DSC and XRD. The co...

  16. Essential oil composition and nutrient analysis of selected medicinal plants in Sultanate of Oman

    Directory of Open Access Journals (Sweden)

    Javid Hussain

    2013-12-01

    Full Text Available Objective: To evaluate the nutrients and essential oils of five medicinal plants, Juniperus excelsa (J. excelsa, Dodonaea viscosa, Euryops pinifolius, Teucrium polium (T. polium, and Helianthemum lippii that were collected from Jabal Al Akhdar, Oman. Methods: Proximate parameters (moisture, dry matter, ash, crude fats, proteins, fibers, nitrogen, carbohydrates, and energy values and nutrient analysis (K, Na, Ca, Fe, P, Mg etc. were evaluated in the five medicinal plants using standard techniques. On the basis of these analysis, T. polium and J. excels were selected for essential oil analysis using a rapid solvent-free microwave extraction method and GC-MS. Results: The results showed that leaves of J. excelsa had highest proportion of crude fats, fibers and energy value while ash was highest in T. polium. J. excelsa was also rich in essential minerals such as calcium, magnesium, potassium and iron while the trace elements and heavy metals composition was marginal. A rapid solvent-free microwave extraction method to extract oil from medicinal plants species showed that only T. polium and J. excelsa yielded oil. The chemical composition of essential oils showed higher proportion of delta-3-carene, limonene, β-eudesmol, ledeneoxide (II, α-trans-bergamatene, linalyl acetate and germacrene. Conclusions: J. excelsa and T. polium are a good source of proximate, minerals and essential oils, which can be considered for healthy life besides their medicinal values.

  17. Obtention of Free Fatty Acids of Macauba Oil (Acrocomia Aculeata in Organic Solvent Free System

    Directory of Open Access Journals (Sweden)

    Caroline Portilho Trentini

    2014-05-01

    Full Text Available The present study aimed to investigate the enzymatic hydrolysis of oil Macaúba, to obtain a hydrolyzate rich in free fatty acids (FFA for later use in step esterification. The effect of process variables (percentage of catalyst, temperature and water content was evaluated in the FFA yield, using a factorial experimental design 23, where the positive and significant effect of the variables was observed. The results reported yields of 50.5% in FFA in 6 hours of reaction at 60ºC, water percentage of 15 wt% and catalyst percentage of 5 wt%.

  18. Acid, silver, and solvent-free gold-catalyzed hydrophenoxylation of internal alkynes

    Directory of Open Access Journals (Sweden)

    Marcia E. Richard

    2013-10-01

    Full Text Available A range of arylgold compounds have been synthesized and investigated as single-component catalysts for the hydrophenoxylation of unactivated internal alkynes. Both carbene and phosphine-ligated compounds were screened as part of this work, and the most efficient catalysts contained either JohnPhos or IPr/SIPr. Phenols bearing either electron-withdrawing or electron-donating groups were efficiently added using these catalysts. No silver salts, acids, or solvents were needed for the catalysis, and either microwave or conventional heating afforded moderate to excellent yields of the vinyl ethers.

  19. Green and solvent-free procedure for microwave-assisted synthesis ...

    Indian Academy of Sciences (India)

    istry. The pyridyl heterocyclic nucleus is a building block in molecules of natural products, pharmaceuti- cals such as vasodilator, anticonvulsant, antiepileptic, anaesthetic and agrochemicals such as pesticides and herbicidals.6–9 Owing to their π-stacking ability, direc- tional H-bonding and coordination, triarylpyridines are.

  20. Solvent-free one-pot 1,3-dipolar cycloaddition reactions of ...

    Indian Academy of Sciences (India)

    esting part is 1,3-dipolar cycloaddition, which repre- sents one of the most versatile tools for the construction of five-membered heterocycles. Owing to the labile na- ... (300 MHz, FT NMR) using TMS as internal standard. 13C NMR spectra were recorded on the same instrument at 75MHz. The coupling constants (J) are given ...

  1. Preparation of Ultra-fine Calcium Carbonate by a Solvent-free ...

    African Journals Online (AJOL)

    NJD

    2008-09-19

    Sep 19, 2008 ... aSchool of Material Science and Engineering, Southwest University of Science and Technology, Mianyan, Sichuan 621010, People's Republic of China. bSchool of Chemistry and ... and as a consequence might be applied in industry. .... 8 G.T. Li, Q.F. Hu and X.J. Bao, Non-Metallic Mines, 2000, 23, 34–39.

  2. Fe–Al/clay as an efficient heterogeneous catalyst for solvent-free ...

    Indian Academy of Sciences (India)

    and existence of acid sites.32 Almost all the catalysts proved good and were unexpectedly found to have bet- ter catalytic activity than their parent metal halides. Fe–Al/clay was found to be most active and showed better catalytic activity than some reported catalysts. (table 1). This catalyst was prepared in bulk and cal-.

  3. H 2 O 2-HBr: A metal-free and organic solvent-free reagent system ...

    Indian Academy of Sciences (India)

    A novel, practical and environmentally benign approach has been developed for the oxidation of methylarenes using H2O2-HBr system in water. Arylaldehydes containing electon-withdrawing groups are isolated in good to high yields. Methylarenes containing electon-donating groups, in contrast, are transformed into ...

  4. Lipophilic (hydroxy)phenylacetates by solvent-free lipase-catalyzed esterification and transesterification in vacuo.

    Science.gov (United States)

    Weitkamp, Petra; Weber, Nikolaus; Vosmann, Klaus

    2008-07-09

    Various long-chain alkyl (hydroxy)phenylacetates were prepared in high yield by lipase-catalyzed transesterification of the corresponding short-chain alkyl hydroxyphenylacetates and fatty alcohols in equimolar ratios. The reactions were performed in vacuo at moderate temperatures in the absence of solvents and drying agents in direct contact with the reaction mixture. Immobilized lipase B from Candida antarctica (Novozym 435) was the most effective biocatalyst for the various transesterification reactions. Generally, Novozym 435-catalyzed transesterifications of short-chain alkyl (hydroxy)phenylacetates with long-chain alcohols led to higher conversions and enzyme activities than the corresponding esterifications. For example, the transesterification activity was up to 4-fold higher than the esterification activity for the formation of oleyl 4-hydroxy-3-methoxyphenylacetate using Novozym 435 as a biocatalyst. The relative transesterification activities were as follows: phenylacetate > 3-methoxyphenylacetate approximately 4-methoxyphenylacetate > 4-hydroxy-3-methoxyphenylacetate > 3-hydroxyphenylacetate approximately 4-hydroxyphenylacetate > 2-methoxyphenylacetate > 3,4-dihydroxyphenylacetate. With respect to the position of methoxy and hydroxy substituents, the transesterification activity of Novozym 435 decreased in the order meta approximately para > ortho. Compounds with inverse chemical structures, for example, tyrosyl oleate, were obtained by Novozym 435-catalyzed esterification and transesterification of fatty acids and their methyl esters, respectively, with 2-phenylethan-1-ols. In contrast to the transesterifications of short-chain alkyl (hydroxy)phenylacetates with fatty alcohols, higher conversions and enzyme activities were observed for the Novozym 435-catalyzed esterifications of (hydroxy)phenylethanols with long-chain fatty acids than the corresponding transesterifications with fatty acid methyl esters.

  5. Highly efficient preparation of lipophilic hydroxycinnamates by solvent-free lipase-catalyzed transesterification.

    Science.gov (United States)

    Weitkamp, Petra; Vosmann, Klaus; Weber, Nikolaus

    2006-09-20

    Various medium- or long-chain alkyl cinnamates and hydroxycinnamates, including oleyl p-coumarate as well as palmityl and oleyl ferulates, were prepared in high yield by lipase-catalyzed transesterification of an equimolar mixture of a short-chain alkyl cinnamate and a fatty alcohol such as lauryl, palmityl, and oleyl alcohol under partial vacuum at moderate temperature in the absence of solvents and drying agents in direct contact with the reaction mixture. Immobilized lipase B from Candida antarctica was the most effective biocatalyst for the various transesterification reactions. Transesterification activity of this enzyme was up to 56-fold higher than esterification activity for the preparation of medium- and long-chain alkyl ferulates. The relative transesterification activities found for C. antarctica lipase were of the following order: hydrocinnamate > cinnamate > 4-hydroxyhydrocinnamate > 3-methoxycinnamate > 2-methoxycinnamate approximately 4-methoxycinnamate approximately 3-hydroxycinnamate > hydrocaffeate approximately 4-hydroxycinnamate > ferulate > 2-hydroxycinnamate > caffeate approximately sinapate. With respect to the position of the hydroxy substituents at the phenyl moiety, the transesterification activity of C. antarctica lipase B increased in the order meta > para > ortho. The immobilized lipases from Rhizomucor miehei and Thermomyces lanuginosus demonstrated moderate and low transesterification activity, respectively. Compounds with inverse chemical structure, that is, 3-phenylpropyl alkanoates such as 3-(4-hydroxyphenyl)propyl oleate and 3-(3,4-dimethoxyphenyl)propyl oleate, were obtained by C. antarctica lipase-catalyzed transesterification of fatty acid methyl esters with the corresponding 3-phenylpropan-1-ols in high yield, as well.

  6. Vacuum-and-solvent-free fabrication of organic semiconductor layers for field-effect transistors

    Science.gov (United States)

    Matsushima, Toshinori; Sandanayaka, Atula S. D.; Esaki, Yu; Adachi, Chihaya

    2015-09-01

    We demonstrate that cold and hot isostatic pressing (CIP and HIP) is a novel, alternative method for organic semiconductor layer fabrication, where organic powder is compressed into a layer shape directly on a substrate with 200 MPa pressure. Spatial gaps between powder particles and the other particles, substrates, or electrodes are crushed after CIP and HIP, making it possible to operate organic field-effect transistors (OFETs) containing the compressed powder as the semiconductor. The CIP-compressed powder of 2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene (C8-BTBT) had a hole mobility of (1.6 ± 0.4) × 10-2 cm2/Vs. HIP of C8-BTBT powder increased the hole mobility to an amorphous silicon-like value (0.22 ± 0.07 cm2/Vs) because of the growth of the C8-BTBT crystallites and the improved continuity between the powder particles. The vacuum and solution processes are not involved in our CIP and HIP techniques, offering a possibility of manufacturing OFETs at low cost.

  7. MICROWAVE-ASSISTED SOLVENT-FREE OR AQUEOUS-BASED SYNTHESIS OF BIODEGRADABLE POLYMERS. (R826117)

    Science.gov (United States)

    The perspectives, information and conclusions conveyed in research project abstracts, progress reports, final reports, journal abstracts and journal publications convey the viewpoints of the principal investigator and may not represent the views and policies of ORD and EPA. Concl...

  8. Solvent-free production of 1,3-diglyceride of CLA: Strategy consideration and protocol design

    DEFF Research Database (Denmark)

    Guo, Zheng; Sun, Yan

    2007-01-01

    Enzymatic production of a homogeneous 1,3-diglyceride of polyunsaturated fatty acids (PUFAs) was carried out using Novozym 435 as biocatalyst and conjugated linoleic acid (CLA) as a model fatty acid. Three different operation modes, namely, magnetic stirring under vacuum, vacuum-driven N2 bubbling...... and incubation with molecular sieves, were examined to find an efficient protocol for the enzymatic production. Studies on the effects of mass transfer showed that the occurrence of mass transfer limitation was strongly dependent on the operational modes. Vacuum-driven N2 bubbling proved to be capable...... excellent operational stability in this protocol under the optimized conditions (little activity loss of enzyme was observed after 10 consecutive batch reactions), indicating the potential of this technology for industrial application....

  9. Solvent-free sonochemistry: Sonochemical organic synthesis in the absence of a liquid medium

    Directory of Open Access Journals (Sweden)

    Deborah E. Crawford

    2017-09-01

    Full Text Available Sonochemistry, i.e., the application of mechanical energy in the form of sound waves, has recently been recognised for its similarity to mechanochemistry and is now included under the umbrella term of mechanochemistry. Typically, due to the hypothesised cavitation mechanism, a liquid medium is considered as a necessity for a process to take place as a result of ultrasonic irradiation. In view of this, condensation reactions between solid reagents in the complete absence of solvent were carried out successfully by ultrasonic irradiation with the importance of particle size being highlighted. This work increases the potential of sonochemistry in the drive towards a sustainable future.

  10. Green and solvent-free procedure for microwave-assisted synthesis ...

    Indian Academy of Sciences (India)

    Design and development of a heterogeneous nanocatalyst for condensation reaction of acetophenone derivatives, aromatic aldehydes, and ammonium acetate to yield 2,4,6-triarylpyridines followed by microwave irradiation is described. Nanocrystalline MgAl2O4 as a novel heterogeneous recyclable catalyst shows high ...

  11. Solvent-Free Manufacturing of Electrodes for Lithium-ion Batteries

    Science.gov (United States)

    Ludwig, Brandon; Zheng, Zhangfeng; Shou, Wan; Wang, Yan; Pan, Heng

    2016-03-01

    Lithium ion battery electrodes were manufactured using a new, completely dry powder painting process. The solvents used for conventional slurry-cast electrodes have been completely removed. Thermal activation time has been greatly reduced due to the time and resource demanding solvent evaporation process needed with slurry-cast electrode manufacturing being replaced by a hot rolling process. It has been found that thermal activation time to induce mechanical bonding of the thermoplastic polymer to the remaining active electrode particles is only a few seconds. Removing the solvent and drying process allows large-scale Li-ion battery production to be more economically viable in markets such as automotive energy storage systems. By understanding the surface energies of various powders which govern the powder mixing and binder distribution, bonding tests of the dry-deposited particles onto the current collector show that the bonding strength is greater than slurry-cast electrodes, 148.8 kPa as compared to 84.3 kPa. Electrochemical tests show that the new electrodes outperform conventional slurry processed electrodes, which is due to different binder distribution.

  12. Solvent-free preparation of high-toughness epoxy--SWNT composite materials.

    Science.gov (United States)

    González-Domínguez, Jose M; Ansón-Casaos, Alejandro; Díez-Pascual, Ana M; Ashrafi, Behnam; Naffakh, Mohammed; Backman, David; Stadler, Hartmut; Johnston, Andrew; Gómez, Marian; Martínez, M Teresa

    2011-05-01

    Multicomponent nanocomposite materials based on a high-performance epoxy system and single-walled carbon nanotubes (SWNTs) have been prepared. The noncovalent wrapping of nitric acid-treated SWNTs with a PEO-based amphiphilic block copolymer leads to a highly disaggregated filler with a boosted miscibility in the epoxy matrix, allowing its dispersion without organic solvents. Although direct dispersion of acid-treated SWNTs results in modestly improved epoxy matrix mechanical properties, the incorporation of wrapped SWNTs produces a huge increase in toughness (276% improvement at 0.5 wt % loading) and impact strength (193% at 0.5 wt % loading) with no detrimental effect on the elastic properties. A synergistic effect between SWNTs and the block copolymer is revealed on the basis of tensile and impact strength results. Atomic force microscopy has been applied, obtaining stiffness mappings that identify nanostructure features responsible of the dynamic mechanical behavior. The electrical percolation threshold is greatly reduced, from 0.31 to 0.03 wt % SWNTs when block copolymer-wrapped SWNTs are used, and all the measured conductivity values increased up to a maximum of 7 orders of magnitude with respect to the baseline matrix (1 wt % wrapped-SWNTs loading). This approach provides an efficient way to disperse barely dispersible SWNTs without solvents into an epoxy matrix, and to generate substantial improvements with small amounts of SWNTs.

  13. Microwave-assisted silica-promoted solvent-free synthesis of ...

    Indian Academy of Sciences (India)

    PLATON (Spek, 2009). 2.3 General procedure for preparation of triazoloquinazo- linone derivatives (1a–1h)/benimidazoquinazolinone derivatives (2a–2h). A Slurry of equimolar quantities of 3-amino-1,2,4- triazole/2-amino benzimidazole, dimedone and benzaldehyde in a minimum quantity of ethanol/MDC was allowed to ...

  14. Selective solvent-free chromium detection using cadmium-free quantum dots

    Science.gov (United States)

    Meylemans, Heather A.; Baca, Alfred J.; Cambrea, Lee R.; Ostrom, Gregory S.

    2017-07-01

    Currently, the method of choice to test for the presence of chromium in water is to submit samples to a lab for testing. We present a simple field-ready test that is selective for the presence of chromium at concentrations of 100 ppb or greater. The Environmental Protection Agency maximum contaminant level (MCL) for total chromium is 100 ppb. This test uses a simple on/off fluorescent screening employing the use of silver indium sulfide (AgInS2) quantum dots (QDs). These QDs were impregnated into cotton pads to simplify field testing without the need for solvents or other liquid chemicals to be present. The change in fluorescence is instant and can be readily observed by eye with the use of a UV flashlight.

  15. Solvent-free cyclization of linear dienes using olefin metathesis and the Thorpe-Ingold effect

    Energy Technology Data Exchange (ETDEWEB)

    Forbees, M.D.E.; Myers, T.L.; Maynard, H.D.; Schulz, G.R. (Univ. of North Carolina, Chapel Hill (United States)); Patton, J.T.; Smith, D.W. Jr.; Wagener, K.B. (Univ. of Florida, Gainesville (United States))

    1992-12-30

    The olefin metathesis reaction is of great synthetic utility in polymer chemistry. The recent development of ring-opening (ROMP) and acyclic diene (ADMET) metathesis polymerization reactions has opened new avenues for the synthesis of novel polymeric materials. Recently the authors used ADMET to synthesize several photochemically active poly(keto olefins) using the catalyst Mo(CHCMe[sub 2]Ph)(NAr)(OCMe(CF[sub 3])[sub 2])[sub 2] (Ar = 2,6-diisopropylphenyl) (1) developed by Schrock and co-workers in 1990. In the course of that work, they discovered that neat samples of highly substituted dienes will cyclize quantitatively via metathesis to give difunctional five- and seven-membered rings instead of the expected linear polymer. Examples of substituted diene cyclizations by metathesis even in the presence of a solvent are rare. Their systematic exploitation in organic synthesis has therefore been limited to two recent studies by Fu and Grubbs, who cyclized several substituted diene ethers, amines, and amides to unsaturated oxygen and nitrogen heterocycles. Cyclization of unsubstituted dienes in various solvents has been reported, but complete conversion occurred in only a few cases. Formation of cyclic alkene oligomers from back-biting during the ROMP reaction is also known. The reactions reported here are unusual in that they are intermolecular between catalyst and substrate, yet can give 100% yield of product solely from the monomer in the absence of solvent. 13 refs.

  16. An Environmentally Friendly Solvent-free Synthesis of 3,4 ...

    African Journals Online (AJOL)

    NICO

    La(OTf)3,16 BF3@OEt2,17 ionic liquids (BMIm@PF6 and BMIm@BF4),18 ... and use of moisture sensitive, toxic and costly catalysts. ... Analyzer. 3.1 Preparation of Dihydropyrimidinones 4a–n: General Procedure. A typical procedure is as follows: A mixture of benzaldehyde. (1 mmol), ethyl acetoacetate (1 mmol), urea ...

  17. Monoglycerides and Diglycerides Synthesis in a Solvent-Free System by Lipase-Catalyzed Glycerolysis

    Science.gov (United States)

    Fregolente, Patricia Bogalhos Lucente; Fregolente, Leonardo Vasconcelos; Pinto, Gláucia Maria F.; Batistella, Benedito César; Wolf-Maciel, Maria Regina; Filho, Rubens Maciel

    Five lipases were screened (Thermomyces lanuginosus free and immobilized forms, Candida antarctica B, Candida rugosa, Aspergillus niger, and Rhizomucor miehei) to study their ability to produce monoglycerides (MG) and diglycerides (DG) through enzymatic glycerolysis of soybean oil. Lipase from C. antarctica was further studied to verify the enzyme load (wt% of oil mass), the molar ratio glycerol/oil, and the water content (wt% of glycerol) on the glycerolysis reaction. The best DG and MG productions were in the range 45-48% and 28-30% (w/w, based on the total oil), respectively. Using immobilized lipases, the amount of free fatty acids (FFA) produced was about 5%. However, the amount of FFA produced when using free lipases, with 3.5% extra water in the system, is equivalent to the MG yield, about 23%. The extra water content provides a competition between hydrolysis and glycerolysis reactions, increasing the FFA production.

  18. Fe–Al/clay as an efficient heterogeneous catalyst for solvent-free ...

    Indian Academy of Sciences (India)

    aIndian Institute of Integrative Medicine (CSIR), Canal Road, Jammu 180 001, India. bDepartment of Chemistry, University of Jammu, Jammu 180 004, India ... channel blockers,2,3 antihypertensive agents2–5 and neu- ropeptide Y (NPY) antagonists.1 Moreover, several alkaloids containing the 3, 4-dihydropyrimidone scaf-.

  19. A Facile Solvent-Free Cannizzaro Reaction: An Instructional Model for Introductory Organic Chemistry Laboratory

    Science.gov (United States)

    Phonchaiya, Sonthi; Panijpan, Bhinyo; Rajviroongit, Shuleewan; Wright, Tony; Blanchfield, Joanne T.

    2009-01-01

    Liquid 2-chlorobenzaldehyde was converted, by grinding with potassium hydroxide pellets, into equimolar quantities of solid 2-chlorobenzoic acid and solid 2-chlorobenzyl alcohol in a Cannizzaro reaction. TLC, IR, and NMR experiments, using authentic samples for comparison, confirmed the identity and purity of the two products. Guided-inquiry…

  20. Solvent-free formation of hydroxyapatite coated biodegradable particles via nanoparticle-stabilized emulsion route

    Energy Technology Data Exchange (ETDEWEB)

    Okada, Masahiro, E-mail: okada-m@cc.osaka-dent.ac.jp [Department of Biomaterials, Osaka Dental University, 8-1 Kuzuha-Hanazono, Hirakata, Osaka 573-1121 (Japan); Fujii, Syuji, E-mail: s.fujii@chem.oit.ac.jp [Department of Applied Chemistry, Osaka Institute of Technology 5-16-1 Ohmiya, Asahi, Osaka 535-8585 (Japan); Nishimura, Taiki; Nakamura, Yoshinobu [Department of Applied Chemistry, Osaka Institute of Technology 5-16-1 Ohmiya, Asahi, Osaka 535-8585 (Japan); Takeda, Shoji [Department of Biomaterials, Osaka Dental University, 8-1 Kuzuha-Hanazono, Hirakata, Osaka 573-1121 (Japan); Furuzono, Tsutomu [Department of Biomedical Engineering, School of Biology-Oriented Science and Technology, Kinki University, 930 Nishi-Mitani, Kinokawa, Wakayama 649-6493 (Japan)

    2012-12-01

    Highlights: Black-Right-Pointing-Pointer Hydroxyapatite (HAp) nanoparticles stabilized polymer melt-in-water emulsions without any molecular surfactants. Black-Right-Pointing-Pointer Interaction between polymer and HAp played a crucial role. Black-Right-Pointing-Pointer HAp-coated polymer particles were obtained from the emulsions without any organic solvents. - Abstract: Hydroxyapatite (HAp) nanoparticle-coated biodegradable polymer particles were fabricated from a nanoparticle-stabilized emulsion in the absence of any molecular surfactants or organic solvents. First, a polymer melt-in-water emulsion was prepared by mixing a water phase containing nanosized HAp particles as a particulate emulsifier and an oil phase consisting of poly({epsilon}-caprolactone) (PCL) or poly(L-lactide-co-{epsilon}-caprolactone) (P(LLA-CL)) above its melting point. It was clarified that the interaction between ester/carboxyl groups of the polymers and the HAp nanoparticles at the polymer-water interface played a crucial role to prepare the nanoparticle-stabilized emulsion. The HAp nanoparticle-coated biodegradable polymer particle (a polymer solid-in-water emulsion) was fabricated by cooling the emulsion. The particle morphology and particle size were evaluated using scanning electron microscope.

  1. Multicomponent, solvent-free synthesis of 12-aryl-8,9,10,12 ...

    Indian Academy of Sciences (India)

    Administrator

    -8,9,10,12-tetrahydro- benzo[a]xanthen-11-one derivative; the most com- mon method is the ... Hence, the development of new and simple synthetic methods for the ..... Griffiths J and Lee W J 2003 Dyes Pigments 57 107. 2. Ahmad M, King T A, ...

  2. A Green and Solvent-Free Process for Preparation of High- Purity ...

    African Journals Online (AJOL)

    http://dx.doi.org/10.4314/tjpr.v13i1.6 · AJOL African Journals Online. HOW TO USE AJOL... for Researchers · for Librarians · for Authors · FAQ's · More about AJOL · AJOL's Partners · Terms and Conditions of Use · Contact AJOL · News. OTHER RESOURCES... for Researchers · for Journals · for Authors · for Policy Makers ...

  3. Highly efficient cobalt-doped carbon nitride polymers for solvent-free selective oxidation of cyclohexane

    Directory of Open Access Journals (Sweden)

    Yu Fu

    2017-04-01

    Full Text Available Selective oxidation of saturated hydrocarbons with molecular oxygen has been of great interest in catalysis, and the development of highly efficient catalysts for this process is a crucial challenge. A new kind of heterogeneous catalyst, cobalt-doped carbon nitride polymer (g-C3N4, was harnessed for the selective oxidation of cyclohexane. X-ray diffraction, Fourier transform infrared spectra and high resolution transmission electron microscope revealed that Co species were highly dispersed in g-C3N4 matrix and the characteristic structure of polymeric g-C3N4 can be retained after Co-doping, although Co-doping caused the incomplete polymerization to some extent. Ultraviolet–visible, Raman and X-ray photoelectron spectroscopy further proved the successful Co doping in g-C3N4 matrix as the form of Co(IIN bonds. For the selective oxidation of cyclohexane, Co-doping can markedly promote the catalytic performance of g-C3N4 catalyst due to the synergistic effect of Co species and g-C3N4 hybrid. Furthermore, the content of Co largely affected the activity of Co-doped g-C3N4 catalysts, among which the catalyst with 9.0 wt% Co content exhibited the highest yield (9.0% of cyclohexanone and cyclohexanol, as well as a high stability. Meanwhile, the reaction mechanism over Co-doped g-C3N4 catalysts was elaborated. Keywords: Selective oxidation of cyclohexane, Oxygen oxidant, Carbon nitride, Co-doping

  4. Solvent-free one-pot 1,3-dipolar cycloaddition reactions of ...

    Indian Academy of Sciences (India)

    Int. Ed. 43 6250. 3. Perreux L and Loupy A 2001 Tetrahedron 57 9199. 4. Loupy A, Petti A, Hamelin J, Texier-Boullet F, Jacquault. P and Mathé D 1998 Synthesis 9 1213. 5. Loupy A 2006 Microwaves in organic synthesis. (Weinheim, Germany: Wiley-VCH) 2nd edn. 6. Kabalka G W and Pagni R M 1997 Tetrahedron 53 7999.

  5. Solvent-free lipase catalysed synthesis of diacylgycerols as low-calorie food ingredients

    Directory of Open Access Journals (Sweden)

    Luis eVazquez

    2016-02-01

    Full Text Available Problems derived from obesity and overweight have recently promoted the development of fat substitutes and other low-calorie foods. On the one hand, fats with short and medium chain fatty acids are a source of quick energy, easily hydrolyzable and hardly stored as fat. Furthermore, 1,3-diacylglycerols are not hydrolyzed to 2-monoacylglycerols in the gastrointestinal tract, reducing the formation of chylomicron and lowers the serum level of triacylglycerols by decreasing its re-synthesis in the enterocyte and its metabolism and absorption by the enterocyte are limited in comparison with the TAG, reducing chylomicron formation. In this work these two effects were combined to synthesize short and medium chain 1,3 diacylglycerols, leading to a product with great potential as for their low-calorie properties. Lipase catalysed transesterification reactions were performed between short and medium chain fatty acid ethyl esters and glycerol. Different variables were investigated such as the type of biocatalyst, the molar ratio FAEE:glycerol, the adsorption of glycerol on silica gel or the addition of lecithin. Best reaction conditions were evaluated considering the conversion intopercentage of 1,3-DAG produced and the reaction rate. Except Novozym 435 (Candida antarctica, other lipases required the adsorption of glycerol on silica gel to form acylglycerols. Lipases that gave the best results with adsorption were Novozym 435 and Lipozyme RM IM (Rhizomucor miehei with 52% and 60.7% of DAG at 32 h, respectively. Because of its specificity for sn-1 and sn-3 positions, lipases leading to a higher proportion of 1,3-DAG vs 1,2-DAG were Lipozyme RM IM (39.8% and 20.9%, respectively and Lipase PLG (Alcaligenes sp. (35.9% and 19.3%, respectively. By adding 1% (w/w of lecithin to the reaction with Novozym 435 and raw glycerol the reaction rate was considerably increased from 41.7% to 52.8% DAG at 24 h.

  6. Pickering Interfacial Catalysts for solvent-free biomass transformation: physicochemical behavior of non-aqueous emulsions.

    Science.gov (United States)

    Fan, Zhaoyu; Tay, Astrid; Pera-Titus, Marc; Zhou, Wen-Juan; Benhabbari, Samy; Feng, Xiaoshuang; Malcouronne, Guillaume; Bonneviot, Laurent; De Campo, Floryan; Wang, Limin; Clacens, Jean-Marc

    2014-08-01

    A key challenge in biomass conversion is how to achieve valuable molecules with optimal reactivity in the presence of immiscible reactants. This issue is usually tackled using either organic solvents or surfactants to promote emulsification, making industrial processes expensive and not environmentally friendly. As an alternative, Pickering emulsions using solid particles with tailored designed surface properties can promote phase contact within intrinsically biphasic systems. Here we show that amphiphilic silica nanoparticles bearing a proper combination of alkyl and strong acidic surface groups can generate stable Pickering emulsions of the glycerol/dodecanol system in the temperature range of 35-130°C. We also show that such particles can perform as Pickering Interfacial Catalysts for the acid-catalyzed etherification of glycerol with dodecanol at 150°C. Our findings shed light on some key parameters governing emulsion stability and catalytic activity of Pickering interfacial catalytic systems. This understanding is critical to pave the way toward technological solutions for biomass upgrading able to promote eco-efficient reactions between immiscible organic reagents with neither use of solvents nor surfactants. Copyright © 2013 Elsevier Inc. All rights reserved.

  7. Solvent-free formation of hydroxyapatite coated biodegradable particles via nanoparticle-stabilized emulsion route

    International Nuclear Information System (INIS)

    Okada, Masahiro; Fujii, Syuji; Nishimura, Taiki; Nakamura, Yoshinobu; Takeda, Shoji; Furuzono, Tsutomu

    2012-01-01

    Highlights: ► Hydroxyapatite (HAp) nanoparticles stabilized polymer melt-in-water emulsions without any molecular surfactants. ► Interaction between polymer and HAp played a crucial role. ► HAp-coated polymer particles were obtained from the emulsions without any organic solvents. - Abstract: Hydroxyapatite (HAp) nanoparticle-coated biodegradable polymer particles were fabricated from a nanoparticle-stabilized emulsion in the absence of any molecular surfactants or organic solvents. First, a polymer melt-in-water emulsion was prepared by mixing a water phase containing nanosized HAp particles as a particulate emulsifier and an oil phase consisting of poly(ε-caprolactone) (PCL) or poly(L-lactide-co-ε-caprolactone) (P(LLA-CL)) above its melting point. It was clarified that the interaction between ester/carboxyl groups of the polymers and the HAp nanoparticles at the polymer–water interface played a crucial role to prepare the nanoparticle-stabilized emulsion. The HAp nanoparticle-coated biodegradable polymer particle (a polymer solid-in-water emulsion) was fabricated by cooling the emulsion. The particle morphology and particle size were evaluated using scanning electron microscope.

  8. Facile solvent-free one-pot synthesis of pyranobenzopyrans and ...

    Indian Academy of Sciences (India)

    The condensation of hydroxyl coumarins in a facile one-pot procedure with active methylene esters to afford novel benzopyrans under solventless conditions is described. The products underwent further condensation and cyclization reactions to form novel heterocycles.

  9. Solvent-free Oxidation of Alcohols and Mild Catalytic Deprotection of ...

    African Journals Online (AJOL)

    NJD

    hexane/acetone) at room temperature. For improved pulverization, some silica gel was added to the mortar. After completion of the reaction, CH2Cl2 (10 mL) was added, and the reagent was removed by filtration. Evaporation of the. RESEARCH ...

  10. Catalyst: and solvent-free synthesis of imidazo[1,2-a]pyridines

    OpenAIRE

    Zhu, Dong-Jian; Chen, Jiu-Xi; Liu, Miao-Chang; Ding, Jin-Chang; Wu, Hua-Yue

    2009-01-01

    A highly efficient and facile method has been described for the synthesis of imidazo[1,2-a]pyridines in good to excellent yields by condensation of the α-haloketones (ArCOCHXR², Ar = C6H5, 4-MeOC6H4, 4-ClC6H4, 2,4-Cl2C6H3; X = Br, Cl; R² = H, CH3) with 2-aminopyridines without the use of any additional catalyst and solvent. Um método altamente eficiente e simples foi descrito para a síntese de imidazo[1,2-a]piridinas pela condensação de α-halocetonas (ArCOCHXR², Ar = C6H5, 4-MeOC6H4, 4-ClC...

  11. Solvent-free oxidation of aldehydes to acids by TBHP using ...

    Indian Academy of Sciences (India)

    chromic acid, potassium permanganate in acidic, basic and neutral solution, bromine and nitric acid are not suitable for the large scale preparation of carboxylic acid because of the formation of hazardous waste. Balicki Roman3 achieved mild oxidation of aromatic and heteroaromatic aldehydes to the corresponding.

  12. Rapid, efficient and solvent free microwave mediated synthesis of aldo- and ketonitrones

    Directory of Open Access Journals (Sweden)

    Loredana Maiuolo

    2016-01-01

    Full Text Available A library of C-alkyl and C-aryl nitrones has been obtained by direct condensation of primary N-substituted hydroxylamine hydrochlorides with various aldehydes and ketones without catalysts or base. The synthetic procedure, performed under MW irradiation in the absence of solvent, does not require the presence of a base, is fast, clean, high-yielding and characterized by simple work-up.

  13. In-Vitro Characterization and Oral Bioavailability of Organic Solvent-free Solid Dispersions Containing Telmisartan

    DEFF Research Database (Denmark)

    Cao, Yue; Shi, Li-Li; Cao, Qing-Ri

    2016-01-01

    ) and polyethylene glycol 6000 (PEG 6000) as hydrophilic polymers, sodium hydroxide (NaOH) as an alkalizer, and poloxamer 188 as a surfactant by a lyophilization method. In-vitro dissolution rate and physicochemical properties of the OSF-SDs were characterized using the USP I basket method, differential scanning...

  14. Green Technique-Solvent Free Microwave Synthesis and Antimicrobial Evaluation of New Thiopyridine Arabinosides

    Directory of Open Access Journals (Sweden)

    Ibrahim A. Maghrabi

    2016-04-01

    Full Text Available A green protocol has been applied to synthesize a novel series of 3-cyano-2-(tri-O-acetyl-β-d-arabinopyranosylthiopyridines in a short reaction time, in higher yields and with simpler operations, when compared with the conventional heating method. Deacetylation of the obtained acetylated arabinosides produced 2-(β-d-arabinopyranosylthio-3-cyanopyridines. The structures of the obtained products were confirmed on the basis of spectroscopic data (FT-IR, 1D, 2D-NMR. The synthesized compounds were screened for the antimicrobial activity against a selection of Gram positive and Gram negative bacteria.

  15. Facile solvent-free one-pot synthesis of pyranobenzopyrans and ...

    Indian Academy of Sciences (India)

    Organic Chemistry Research Laboratory, Ramnarain Ruia College, Matunga, Mumbai 400 019, India e-mail: pednekarsuhas@gmail.com. MS received 9 December 2010; revised 8 May ... terial, antifungal, CNS depressant, antiviral, ulcer inhibitor, etc.16–22 Suksdorfin and DCK which contain pyranobenzopyran moiety are ...

  16. Solvent-Free Synthesis of Quaternary Metal Sulfide Nanoparticles Derived from Thiourea

    KAUST Repository

    Bhunia, Manas Kumar

    2017-08-09

    The synthesis of metal sulfide (MS) materials with sizes in the sub-10 nm regime often requires capping agents with long hydrocarbon chains that affect their structures and properties. Herein, this study presents a molten-state synthesis method for a series of transition-MS nanoparticles using thiourea as a reactive precursor without capping agents. This study also reports the synthesis of MS with single metals (Fe, Co, Ni, Cu, and Zn) and quaternary CuGa2In3S8 using the same synthesis protocol. Thiourea first melts to form a molten-state condition to serve as the reaction medium at a relatively low temperature (<200 °C), followed by its thermal decomposition to induce a reaction with the metal precursor to form different MS. This synthesis protocol, owing to its dynamic characteristics, involves the formation of a variety of organic carbon nitride polymeric complexes around the MS particles. Dynamic nuclear polarization surface-enhanced nuclear magnetic resonance spectroscopy is effective to identify the polymeric compositions and structures as well as their interactions with the MS. These results provided thorough structural descriptions of the MS nanoparticles surrounded by the carbon nitride species derived from thiourea, which may find various applications, including photocatalytic water splitting.

  17. Solvent-free oxidation of aldehydes to acids by TBHP using ...

    Indian Academy of Sciences (India)

    free oxidation of aldehydes to acids by TBHP using environmental-friendly MnO 4 − 1 -exchanged Mg-Al hydrotalcite catalyst ... Chemical Engineering and Process Development Division, National Chemical Laboratory, Pune 411 008, India ...

  18. Optical and Structural Properties of Solvent Free Synthesized Starch/Chitosan-ZnO Nanocomposites

    Directory of Open Access Journals (Sweden)

    Anandhavelu Sanmugam

    2017-01-01

    Full Text Available The objective of this work is to develop an environmentally friendly method for preparation of ZnO nanocomposites. ZnO nanocomposites were prepared by three natural fibers such as coir, sawdust, and chitosan using aqueous solution of zinc chloride and sodium hydroxide. The functional groups of ZnO, C=O for polysaccharide, and N-H bending vibration of amine were confirmed by FTIR spectroscopy. A new high intensity absorption band has been observed at 424 cm−1 which corresponds to the E2 mode of hexagonal ZnO. The crystallinity and phase formation of coir, chitosan, and sawdust combined ZnO nanocomposites were confirmed by X-ray diffraction patterns. XRD patterns revealed the polycrystalline nature of ZnO composites belonging to the hexagonal phase with (101 preferential lattice orientation. The microstructural parameters were calculated for coir, chitosan, and saw wood combined ZnO composites. Also texture coefficients were estimated for all the diffraction lines of ZnO based nanocomposites. SEM and TEM analyses confirmed evenly distributed nanosized grains in the ZnO composites. The UV-Vis absorption spectra were observed where the blue shift absorption peak was at 334 nm. The optical band gap values were estimated in the range of 3.18–3.26 eV. The emission peak was observed at ~388 nm and ~463 nm by photoluminescence spectroscopy.

  19. New Organic Solvent Free Three-Component Waterproof Epoxy-Polyamine Systems

    Directory of Open Access Journals (Sweden)

    C. M. LACNJEVAC

    2010-08-01

    Full Text Available The unmodified GY epoxy resin (Vantico AG was crosslinked by the aliphatic and cycloaliphatic EH polyamine adduct (Solutia-Vianova in the different stoichiometric ratio. The optimal time of total crosslinking was determined by indirect measuring of the film hardness. The degree of the epoxy resin crosslinking and the quantity of unreacted epoxy groups have been monitored by the spectroscopic FT-IR method. The content and intensity changes of hydroxy group were correlated to the extent of epoxy reaction and crosslinking degree. By the parameters correlation and a period of resins application, optimal resin/hardeners stoichiometric ratio was defined. It was prerequisite for three-component epoxy system forming which is comparatively more elastic, adhesion and waterproof.

  20. Solvates of the antifungal drug griseofulvin: structural, thermochemical and conformational analysis.

    Science.gov (United States)

    Aitipamula, Srinivasulu; Chow, Pui Shan; Tan, Reginald B H

    2014-02-01

    Four solvates of an antifungal drug, griseofulvin (GF), were discovered. All the solvates were characterized by differential scanning calorimetry, thermogravimetric analysis, and their crystal structures were determined by single-crystal X-ray diffraction. The solvents that form the solvates are acetonitrile, nitromethane and nitroethane (2:1 and 1:1). It was found that all the solvates lose the solvent molecules from the crystal lattice between 343 and 383 K, and that the melting point of the desolvated materials matched the melting point of the solvent-free GF (493 K). The conformation of the GF molecule in solvent-free form was found to be significantly different from the conformations found in the solvates. Solution stability studies revealed that the GF-acetonitrile solvate transforms to GF and that GF-nitroethane (1:1) solvate transforms to GF-nitroethane (2:1) solvate. On the other hand, GF-nitromethane and GF-nitroethane (2:1) solvates were found to be stable in solution. Our results highlight the importance of the co-crystallization technique in the pharmaceutical drug development; it not only expands the solid form diversity but also creates new avenues for unraveling novel solvates.

  1. Analysis of volatiles in dehydrated carrot samples by solid-phase microextraction followed by GC-MS.

    Science.gov (United States)

    Soria, Ana Cristina; Sanz, Jesús; Villamiel, Mar

    2008-10-01

    A solid-phase microextraction (SPME)-based method for the GC-MS analysis of volatiles in dehydrated carrot root samples has been developed and the effect of the most important factors (fibre coating, extraction temperature, equilibrium time and extraction time) on the fractionation of different volatiles has been studied. GC-MS chromatograms showed terpenoids relevant to carrot aroma such as alpha-pinene, sabinene, beta-myrcene, limonene, gamma-terpinene, terpinolene, trans-caryophyllene and beta-bisabolene, and several furan derivatives whose origin is discussed in this paper. As an example of application, this methodology has been used for the characterization of volatile composition of industrially dehydrated carrots. SPME followed by GC-MS is shown as an affordable, fast and solvent-free technique which can be performed with low sample amounts and be easily implemented at an industry for quality control purposes.

  2. Biopolymers from vegetable oils via catalyst- and solvent-free "click" chemistry: effects of cross-linking density.

    Science.gov (United States)

    Hong, Jian; Luo, Qiang; Wan, Xianmei; Petrović, Zoran S; Shah, Bipin K

    2012-01-09

    New monomers were prepared by introducing the azide groups in castor, canola, corn, soybean, and linseed oils. Polymerization of the azidated oils with alkynated soybean oil under thermal "click" chemistry conditions (without using a solvent or a catalyst) yielded fully cross-linked elastomers (1-5) of almost the same density (1.05 × 10(-3) kg/m(3)). The degree of cross-linking gradually increased from the castor-derived polymer (220 mol/m(3)) to the linseed-derived polymer (683 mol/m(3)). A systematic correlation between the degree of cross-linking and the thermal and mechanical properties was observed in these biopolymers. Tensile strength (0.62-3.39 MPa) and glass transition temperature (-5 to 16 °C) increased and the linear thermal expansion coefficient decreased in the series from the canola-derived polymer (2) to the linseed-derived polymer (5). The castor-derived polymer (1) that possesses an additional hydroxyl group per fatty acid chain behaved differently.

  3. Preparation of lipophilic alkyl (hydroxy)benzoates by solvent-free lipase-catalyzed esterification and transesterification.

    Science.gov (United States)

    Vosmann, K; Wiege, B; Weitkamp, P; Weber, N

    2008-08-01

    Long-chain alkyl benzoates, e.g., lauryl 4-hydroxybenzoate, palmityl 4-hydroxybenzoate, and oleyl 4-hydroxy-3-methoxybenzoate, are formed in high to moderate conversion by lipase-catalyzed transesterification of the corresponding short-chain alkyl benzoates (0.3 to 1 mmol) with fatty alcohols in an equimolar ratio. The substrates are reacted in vacuo in the absence of solvents and drying agents in the reaction mixture. Immobilized lipase B from Candida antarctica (Novozym 435) demonstrates higher activity for the transesterification of various methyl (hydroxy)benzoates with long-chain alcohols than for the corresponding esterification reactions. For example, transesterification activity is around 25-fold higher than esterification activity for the preparation of oleyl 4-hydroxybenzoate. The relative transesterification activities of methoxy- and hydroxy-substituted methyl benzoates found for Novozym 435 are as follows: 2-methoxybenzoate approximately 3-methoxybenzoate > 4-methoxybenzoate > 3-hydroxybenzoate approximately 2-hydroxybenzoate > 4-hydroxybenzoate approximately 4-hydroxy-3-methoxybenzoate approximately 3-hydroxy-4-methoxybenzoate > > 3,4-dihydroxybenzoate. With respect to the position of the substituents at the phenyl moiety of methyl benzoates, transesterification activity of Novozym 435 increases in the order ortho approximately meta > para. Compounds with inverse chemical structure, e.g., (methoxy)benzyl alkanoates, are formed in much higher rates both by esterification and transesterification than the analogous alkyl benzoates. Purification by deacidification, crystallization, or vacuum distillation yielded 74% to 89% of the reaction products.

  4. Dual response surface-optimized process for feruloylated diacylglycerols by selective lipase-catalyzed transesterification in solvent free system.

    Science.gov (United States)

    Zheng, Yan; Wu, Xiao-Mei; Branford-White, Christopher; Quan, Jing; Zhu, Li-Min

    2009-06-01

    Feruloylated diacylglycerol (FDAG) was synthesized using a selective lipase-catalyzed the transesterification between ethyl ferulate and triolein. To optimize the reaction conversion and purity of FDAG, dual response surface was applied to determine the effects of five-level-five-factors and their reciprocal interactions on product synthesis. A total of 32 individual experiments were performed to study reaction temperature, reaction time, substrate molar ratio, enzyme loading, and water activity. The highest reaction conversion and selectivity towards FDAG were 73.9% and 92.3%, respectively, at 55 degrees C, reaction time 5.3 day, enzyme loading 30.4 mg/ml, water activity 0.08, and a substrate molar ratio of 3.7. Moreover, predicted values showed good validation with the experimental values when experiments corresponding to selected points on the contour plots were carried out.

  5. H2 O2 –HBr: A metal-free and organic solvent-free reagent system ...

    Indian Academy of Sciences (India)

    Administrator

    the manufacture of odorants, flavours, food and bev- erage. They serve also as principal intermediates in the production .... HBr reacts with H2O2 to produce free bromine. The generated bromine continues the bromination proc- ... remarkable advantage of this work, 4-nitro- benzaldehyde (table 4, Entry 6, yield = 47%) and.

  6. Solvent-free enzymatic synthesis of 1,3-diconjugated Linoleoyl Glycerol Optimized by Response Surface Methodology

    DEFF Research Database (Denmark)

    Guo, Zheng; Sun, Yan

    2004-01-01

    An operation mode with N2 bubbling under vacuum was employed for the solventfree synthesis of 1,3-diconjugated linoleoyl glycerol (1,3-dCLG) from conjugated linoleic acid (CLA) catalyzed by Novozym 435. The response surface methodology (RSM) was adopted for the optimization of the reaction...... conditions with five major factors (incubation time, temperature, enzyme load, substrate mole ratio, and system vacuum) and three responses (CLA conversion, 1,3-dCLG yield, and acyl migration). Two sets of optimal conditions were recommended. Validation of the RSM model was verified by the good agreement...

  7. Solvent-free lipase-catalyzed preparation of diglycerides from co-products of vegetable oil refining

    Directory of Open Access Journals (Sweden)

    Tangkam, Kamol

    2008-09-01

    Full Text Available Co-products of vegetable oil refining such as a mixed deodorizer distillate resulting from the refining of various vegetable oils, a crude distillate resulting from the physical refining of coconut oil and commercial mixtures of distilled sunflower and coconut fatty acids were used as starting materials for the enzymatic preparation of diglycerides. Reaction conditions (temperature, pressure, molar ratio for the formation of diglycerides by lipase-catalyzed esterification/transesterification were studied using the mixed deodorizer distillate and glycerol as starting materials. The best results were obtained with the immobilized lipase B from Candida antarctica (Novozym 435 in vacuo at 60 °C leading to moderate proportions (~52% of diglycerides. The proportion of diglycerides increased when residual acylglycerides of the co-products of vegetable oil refining were hydrolyzed prior to esterification. Thus, the esterification of hydrolyzed co-products of vegetable oil refining with glycerol led to high formation (62-72% of diglycerides. Short-path vacuum distillation of the esterification products yielded distillation residues containing from 70% to 94% diglycerides. The proportions of fatty acids and monoglycerides in the distilled residues were quite low (Subproductos del refinado de los aceites vegetales tales como el destilado obtenido en el desodorizador al refinar distintos aceites vegetales, el destilado crudo resultante de la refinación física del aceite de coco, y mezclas comerciales de los ácidos grasos obtenidos en la destilación de aceites de girasol y coco fueron utilizados como materiales de partida para la preparación enzimática de diglicéridos. Se estudiaron las condiciones de reacción (temperatura, presión, relación molar para la formación de diglicéridos mediante esterificación/ transesterificación catalizada por lipasas usando la mezcla obtenida del desodorizador y glicerol como materiales de partida. Los mejores resultados se obtuvieron con lipasa B inmovilizada de Candida antarctica (Novozym 435 a vacío y 60 °C obteniéndose una concentración moderada (~52% de diglicéridos. La proporción de diglicéridos aumentó cuando los aciglicéridos residuales de los subproductos de la refinación de los aceites vegetales fueron hidrolizados como paso previo a la esterificación. Así, la esterificación de subproductos hidrolizados del refinado de aceites vegetales con glicerol produjo una alta (62-72% formación de diglicéridos. La posterior destilación a vacío de los productos de esta esterificación produjo destilados conteniendo del 70 al 94% de diglicéridos. Las proporciones de ácidos grasos y monoglicéridos en estos destilados fueron bastante bajas (Rhizomucor miehei y Thermomyces lanuginosus fueron menos activas como biocatalizadores de esterificación.

  8. Solvent-Free Biginelli Reactions Catalyzed by Hierarchical Zeolite Utilizing a Ball Mill Technique: A Green Sustainable Process

    Directory of Open Access Journals (Sweden)

    Ameen Shahid

    2017-03-01

    Full Text Available A sustainable, green one-pot process for the synthesis of dihydropyrimidinones (DHPMs derivatives by a three-component reaction of β-ketoester derivatives, aldehyde and urea or thiourea over the alkali-treated H-ZSM-5 zeolite under ball-milling was developed. Isolation of the product with ethyl acetate shadowed by vanishing of solvent was applied. The hierachical zeolite catalyst (MFI27_6 showed high yield (86%–96% of DHPMs in a very short time (10–30 min. The recyclability of the catalyst for the subsequent reactions was examined in four subsequent runs. The catalyst was shown to be robust without a detectable reduction in catalytic activity, and high yields of products showed the efficient protocol of the Biginelli reactions.

  9. Solvent-Free Selective Oxidation of Toluene with O2 Catalyzed by Metal Cation Modified LDHs and Mixed Oxides

    Directory of Open Access Journals (Sweden)

    Xiaoli Wang

    2016-01-01

    Full Text Available A series of metal cation modified layered-double hydroxides (LDHs and mixed oxides were prepared and used to be the selective oxidation of toluene with O2. The results revealed that the modified LDHs exhibited much higher catalytic performance than their parent LDH and the modified mixed oxides. Moreover, the metal cations were also found to play important roles in the catalytic performance and stabilities of modified catalysts. Under the optimal reaction conditions, the highest toluene conversion reached 8.7% with 97.5% of the selectivity to benzyldehyde; moreover, the catalytic performance remained after nine catalytic runs. In addition, the reaction probably involved a free-radical mechanism.

  10. A clean method for solvent-free nitration of toluene over sulfated titania promoted by ceria catalysts.

    Science.gov (United States)

    Mao, Wei; Ma, Hongzhu; Wang, Bo

    2009-08-15

    A mild simple method for nitration of aromatic compounds, various solid acids as catalysts, the air treated with the corona discharge generator as nitrating agent, the liquid-phase nitration of toluene, at ambient temperature and atmospheric pressure without solvent has been investigated. The results show that SO(4)(2-)/TiO(2) (ST) and SO(4)(2-)/TiO(2) doped with CeO(2) (STC) catalysts displayed good nitration activity in the experiments. It is an attractive method for the environmentally friendly synthesis of nitroaromatic compounds. Moreover, only mononitrotoluenes were detected in the products, and the ratio of para-nitrotoluene and ortho-nitrotoluene was approximately 1:1 with various catalysts. A maximum yield of about 11.4% was achieved for mononitrotoluenes in STC reaction system in 3h.

  11. Synthesis of Cycloveratrylene Macrocycles and Benzyl Oligomers Catalysed by Bentonite under Microwave/Infrared and Solvent-Free Conditions

    Directory of Open Access Journals (Sweden)

    Manuel Salmón

    2013-10-01

    Full Text Available Tonsil Actisil FF, which is a commercial bentonitic clay, promotes the formation of cycloveratrylene macrocycles and benzyl oligomers from the corresponding benzyl alcohols in good yields under microwave heating and infrared irradiation in the absence of solvent in both cases. The catalytic reaction is sensitive to the type of substituent on the aromatic ring. Thus, when benzyl alcohol was substituted with a methylenedioxy, two methoxy or three methoxy groups, a cyclooligomerisation process was induced. Unsubstituted, methyl and methoxy benzyl alcohols yielded linear oligomers. In addition, computational chemistry calculations were performed to establish a validated mechanistic pathway to explain the growth of the obtained linear oligomers.

  12. Novel Solvent-free Perovskite Deposition in Fabrication of Normal and Inverted Architectures of Perovskite Solar Cells

    Science.gov (United States)

    Nejand, Bahram Abdollahi; Gharibzadeh, Saba; Ahmadi, Vahid; Shahverdi, H. Reza

    2016-01-01

    We introduced a new approach to deposit perovskite layer with no need for dissolving perovskite precursors. Deposition of Solution-free perovskite (SFP) layer is a key method for deposition of perovskite layer on the hole or electron transport layers that are strongly sensitive to perovskite precursors. Using deposition of SFP layer in the perovskite solar cells would extend possibility of using many electron and hole transport materials in both normal and invert architectures of perovskite solar cells. In the present work, we synthesized crystalline perovskite powder followed by successful deposition on TiO2 and cuprous iodide as the non-sensitve and sensitive charge transport layers to PbI2 and CH3NH3I solution in DMF. The post compressing step enhanced the efficiency of the devices by increasing the interface area between perovskite and charge transport layers. The 9.07% and 7.71% cell efficiencies of the device prepared by SFP layer was achieved in respective normal (using TiO2 as a deposition substrate) and inverted structure (using CuI as deposition substrate) of perovskite solar cell. This method can be efficient in large-scale and low cost fabrication of new generation perovskite solar cells. PMID:27640991

  13. On the addition of conducting ceramic nanoparticles in solvent-free ionic liquid electrolyte for dye-sensitized solar cells

    KAUST Repository

    Lee, Chuan-Pei

    2009-08-01

    Titanium carbide (TiC) is an extremely hard conducting ceramic material often used as a coating for titanium alloys as well as steel and aluminum components to improve their surface properties. In this study, conducting ceramic nanoparticles (CCNPs) have been used, for the first time, in dye-sensitized solar cells (DSSCs), and the incorporation of TiC nanoparticles in a binary ionic liquid electrolyte on the cell performance has been investigated. Cell conversion efficiency with 0.6 wt% TiC reached 1.68%, which was higher than that without adding TiC (1.18%); however, cell efficiency decreased when the TiC content reached 1.0 wt%. The electrochemical impedance spectroscopy (EIS) technique was employed to analyze the interfacial resistance in DSSCs, and it was found that the resistance of the charge-transfer process at the Pt counter electrode (Rct1) decreased when up to 1.0 wt% TiC was added. Presumably, this was due to the formation of the extended electron transfer surface (EETS) which facilitates electron transfer to the bulk electrolyte, resulting in a decrease of the dark current, whereby the open-circuit potential (VOC) could be improved. Furthermore, a significant increase in the fill factor (FF) for all TiC additions was related to the decrease in the series resistance (RS) of the DSSCs. However, at 1.0 wt% TiC, the largest charge-transfer resistance at the TiO2/dye/electrolyte interface was observed and resulted from the poor penetration of the electrolyte into the porous TiO2. The long-term stability of DSSCs with a binary ionic liquid electrolyte, which is superior to that of an organic solvent-based electrolyte, was also studied. © 2009 Elsevier B.V. All rights reserved.

  14. HIGHLY DIASTEREOSELECTIVE MICHAEL REACTION UNDER SOLVENT-FREE CONDITIONS USING MICROWAVES: CONJUGATE ADDITION OF FLAVANONE TO ITS CHALCONE PRECURSOR

    Science.gov (United States)

    Microwave-assisted reaction of 2'-hydroxychalcones in the presence of DBU resulted in the formation of hitherto unknown dimers by conjugate addition of the intermediate cyclic ketone to the starting enone.

  15. HIGHLY DISATEREOSELECTIVE MICHAEL ADDITION OF FLAVANONE TO ITS CHALCONE PRECURSOR UNDER SOLVENT-FREE CONDITIONS USING MICROWAVES [POSTER

    Science.gov (United States)

    Substituted 2'-hydroxychalcones were found to give an equilibrium mixture of the starting chalcone and the corresponding flavanone inf 4.6-1:3 ratio in the presence of DBU gave two hitherto unknown diasteromeric dimers in a highly diastereoselective Michael addition of the carban...

  16. HIGHLY DIASTEREOSELECTIVE MICHAEL ADDITION OF FLAVANONE TO ITS CHALCONE PRECURSOR UNDER SOLVENT-FREE CONDITIONS USING MICROWAVES

    Science.gov (United States)

    Substituted 2'-hydroxychalcones were found to give an equilibrium mixture of the starting chalcone and the corresponding flavanone in 4:6 - 1:3 ratio in the presence of various supports and MW irradiation. MW irradiation of 2'-hydroxychalcones in the presence of DBU gave two hit...

  17. ONE-STEP CONVERSION OF EUGENOL TO METHYL ISOEUGENOL USING MICROWAVE IRRADIATION IN SOLVENT-FREE CONDITIONS

    Directory of Open Access Journals (Sweden)

    Marcellino Rudyanto

    2010-06-01

    Full Text Available A research on conversion of eugenol to methyl isoeugenol via one-step reaction with microwave irradiation has been carried out. Mixtures containing eugenol, sodium or potassium carbonate as solid support, with or without sodium or potassium hydroxide as base, with or without tetrabutylammonium bromide as phase transfer catalyst, with dimethyl sulfate as the methylating agent were irradiated in a domestic microwave oven for 20 - 50 seconds. It was revealed that one-step methylation and isomerization required combinations of sodium or potassium hydroxide base and tetrabutylammonium bromide. Without combination of base and TBAB only one product, i.e. methyl eugenol, was formed.   Keywords: eugenol, methyl eugenol, methyl isoeugenol, microwave

  18. ONE-STEP CONVERSION OF EUGENOL TO METHYL ISOEUGENOL USING MICROWAVE IRRADIATION IN SOLVENT-FREE CONDITIONS

    OpenAIRE

    Marcellino Rudyanto; Lanny Hartanti

    2010-01-01

    A research on conversion of eugenol to methyl isoeugenol via one-step reaction with microwave irradiation has been carried out. Mixtures containing eugenol, sodium or potassium carbonate as solid support, with or without sodium or potassium hydroxide as base, with or without tetrabutylammonium bromide as phase transfer catalyst, with dimethyl sulfate as the methylating agent were irradiated in a domestic microwave oven for 20 - 50 seconds. It was revealed that one-step methylation and isomeri...

  19. H2 O2 –HBr: A metal-free and organic solvent-free reagent system ...

    Indian Academy of Sciences (India)

    Administrator

    environmental impact. 32. The development of waste-free, non-polluting benign systems and more sustainable strategies is one of the main themes of contemporary organic synthe- sis. 33. So far, our investigations on the oxidation of methylarenes to arylaldehydes consisted in using. Br2/DMSO as a mild catalytic system in ...

  20. Infrared Assisted Production of 3,4-Dihydro-2(1H)-pyridones in Solvent-Free Conditions

    Science.gov (United States)

    Noguez, M. Olivia; Marcelino, Vanessa; Rodríguez, Hortensia; Martín, Osnieski; Martínez, Joel O.; Arroyo, Gabriel A.; Pérez, Francisco J.; Suárez, Margarita; Miranda, René

    2011-01-01

    A green approach for the synthesis of a set of ten 4-aryl substituted-5-alcoxy carbonyl-6-methyl-3,4-dihydro-2(1H)-pyridones using Meldrum’s acid has been devised, the absence of solvent and the activation with infrared irradiation in addition to a multicomponent protocol are the main reaction conditions. The transformations proceeded with moderated yields (50–75%) with a reasonable reaction rate (3 h). It is worth noting that two novel molecules of the new class of the bis-3,4-dihydropyridones were also obtained. In addition, a comparison without the use of infrared irradiation was performed. PMID:21731463

  1. Organic Solvent-Free Fabrication of Durable and Multifunctional Superhydrophobic Paper from Waterborne Fluorinated Cellulose Nanofiber Building Blocks.

    Science.gov (United States)

    Baidya, Avijit; Ganayee, Mohd Azhardin; Jakka Ravindran, Swathy; Tam, Kam Chiu; Das, Sarit Kumar; Ras, Robin H A; Pradeep, Thalappil

    2017-11-28

    In view of a great demand for paper-based technologies, nonwettable fibrous substrates with excellent durability have drawn much attention in recent years. In this context, the use of cellulose nanofibers (CNFs), the smallest unit of cellulosic substrates (5-20 nm wide and 500 nm to several microns in length), to design waterproof paper can be an economical and smart approach. In this study, an eco-friendly and facile methodology to develop a multifunctional waterproof paper via the fabrication of fluoroalkyl functionalized CNFs in the aqueous medium is presented. This strategy avoids the need for organic solvents, thereby minimizing cost as well as reducing safety and environmental concerns. Besides, it widens the applicability of such materials as nanocellulose-based aqueous coatings on hard and soft substrates including paper, in large areas. Water droplets showed a contact angle of 160° (±2°) over these surfaces and rolled off easily. While native CNFs are extremely hydrophilic and can be dispersed in water easily, these waterborne fluorinated CNFs allow the fabrication of a superhydrophobic film that does not redisperse upon submersion in water. Incorporated chemical functionalities provide excellent durability toward mechanochemical damages of relevance to daily use such as knife scratch, sand abrasion, spillage of organic solvents, etc. Mechanical flexibility of the chemically modified CNF composed paper remains intact despite its enhanced mechanical strength, without additives. Superhydrophobicity induced excellent microbial resistance of the waterproof paper which expands its utility in various paper-based technologies. This includes waterproof electronics, currency, books, etc., where the integrity of the fibers, as demonstrated here, is a much-needed criterion.

  2. Solvent-Free Henry and Michael Reactions with Nitroalkanes Promoted by Potassium Carbonate as a Versatile Heterogeneous Catalyst

    Directory of Open Access Journals (Sweden)

    Giovanna Bosica

    2017-01-01

    Full Text Available The use of a simple weak inorganic base such as potassium carbonate facilitated the formation of carbon-carbon bonds through both the Henry and the Michael reactions with nitrocompounds. The application of this catalyst under environmentally friendly solventless heterogeneous conditions gave satisfactory to good yields of β-nitroalcohols, involving aliphatic and aromatic starting materials, as well as high to excellent yields in the formation of Michael adducts using several different Michael acceptors and nitroalkanes.

  3. A general and efficient synthesis of pyrazoles catalyzed by Sc(OTf)3 under solvent-free conditions

    OpenAIRE

    Xiong, Wei; Chen, Jiu-Xi; Liu, Miao-Chang; Ding, Jin-Chang; Wu, Hua-Yue; Su, Wei-Ke

    2009-01-01

    Pyrazoles were prepared in excellent yields via solventless condensation of various 1,3-diketones (R¹COCHXCOCH3, R¹ = Me, Ph; X = H, Me, Cl) and hydrazines, acylhydrazines or sulfonyl hydrazines in the presence of a catalytic amount of Sc(OTf)3 at room temperature. Additionally, the catalyst could be recovered easily after the reactions and reused without evident loss in activity. Pirazóis foram preparados em excelentes rendimentos via reação de condensação entre várias 1,3-dicetonas (R¹CO...

  4. Solvent-Free Esterification of Carboxylic Acids Using Supported Iron Oxide Nanoparticles as an Efficient and Recoverable Catalyst

    Directory of Open Access Journals (Sweden)

    Fatemeh Rajabi

    2016-07-01

    Full Text Available Supported iron oxide nanoparticles on mesoporous materials (FeNP@SBA-15 have been successfully utilized in the esterification of a variety carboxylic acids including aromatic, aliphatic, and long-chain carboxylic acids under convenient reaction conditions. The supported catalyst could be easily recovered after reaction completion and reused several times without any loss in activity after up to 10 runs.

  5. 21 CFR 582.40 - Natural extractives (solvent-free) used in conjunction with spices, seasonings, and flavorings.

    Science.gov (United States)

    2010-04-01

    ... use, within the meaning of section 409 of the act, are as follows: Common name Botanical name of plant source Algae, brown Laminaria spp. and Nereocystis spp. Algae, red Porphyra spp. and Rhodymenia palmata... (see algae, brown). Peach kernel (persic oil) Prunus persica Sieb. et Zucc. Peanut stearine Arachis...

  6. A low-cost, environment-friendly and solvent-free route for synthesis of AgBr nanoparticles

    Czech Academy of Sciences Publication Activity Database

    Shahsavani, E.; Khalaji, A.D.; Feizi, N.; Das, D.; Matalobos, J.S.; Kučeráková, Monika; Dušek, Michal

    2015-01-01

    Roč. 82, Jun (2015), s. 18-25 ISSN 0749-6036 R&D Projects: GA ČR(CZ) GA14-03276S Institutional support: RVO:68378271 Keywords : AgBr * nanoparticles * thiosemicarbazone * XRD * SEM * TEM Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 2.117, year: 2015

  7. The National Shipbuilding Research Program. Development of Non-Polluting, Solvent-Free, Liquid Resin Coating Systems For Ships

    Science.gov (United States)

    1974-01-01

    coatings (Formulas No. 1 and No. 6 in Polyurethane Systems, Section 3.3.2, of this report) were successfully sprayed with Graco equipment. During the same...was found to be capable of reaching maximum line pressures of only about 2000 psi, compared to the much high pressure obtainable with the Graco Hydra...not applied at Graco because time did” not permit readjusting the equipment for a 2 to 1 feed ratio. Five-gallon quantities of two different pigmented

  8. Encapsulated Guests in the Smallest Spaces: Shrinking Guests by Compression and Investigations under Solvent-Free Conditions.

    Science.gov (United States)

    Haberhauer, Gebhard; Woitschetzki, Sascha; Füten, Christof

    2015-08-21

    Noncovalent interactions play a pivotal role in a variety of biological and chemical processes. The experimental determination and quantum chemical calculations of the forces driving these interactions are of utmost importance. Of special interest are interactions of molecules in small spaces which show phenomena different from conventional behavior in solution. An extension is the encapsulation of guests in smallest spaces: The guests are too large to be included under standard conditions and hence must be forced to intrude into the cavity. Here, we show the design of such a host-guest system which allows to directly compare the measured thermodynamic values to gas-phase quantum chemical calculations. Structural investigation of the complexes reveals that the encapsulation process causes not only an extension of the hollow space of the host but also a shrinking of the included guest by compression.

  9. Electrospun-sodiumtetrafluoroborate-polyethylene oxide membranes for solvent-free sodium ion transport in solid state sodium ion batteries

    Science.gov (United States)

    Freitag, K. M.; Walke, P.; Nilges, T.; Kirchhain, H.; Spranger, R. J.; van Wüllen, L.

    2018-02-01

    Electrospinning is used to fabricate sodium ion conducting fiber membranes composed of polyethylene oxide (PEO), sodium tetrafluoroborate (NaBF4), and succinonitrile (SN) as plasticizer. As compared to conventionally prepared lithium electrolyte membranes with identical composition (PEO:SN:LiBF4), those membranes exhibit conductivities up to 10-4 S cm-1 at 328 K (activation energy ∼36 kJ mol-1, 36:8:1 membrane), which favors such systems as a solid-state electrolyte alternative for batteries. The conduction mechanism is evaluated and the ion mobility are examined. We identified the segment mobility of the polyethylene oxide as the main driving force for the enhanced ion mobility in the membranes. The introduction of SN has only a minor influence on the conductivity and segment mobility at room temperature, but extents the anion and cation mobility to temperatures below ambient. For the 36:8:1 (PEO:SN:NaBF4) membrane we found the highest ion mobility of all membranes under investigation. A comparison of the present sodium membranes with lithium systems of the same composition shows that the overall performance of the sodium systems is comparable. Taking plasticizer-free sodium membranes into account they perform even better than the lithium containing counterparts, and plasticizer-modified membranes show only half an order of magnitude lower conductivities than comparable lithium ones.

  10. Evaluation of atmospheric solid analysis probe ionization coupled to ion mobility mass spectrometry for characterization of poly(ether ether ketone) polymers

    Energy Technology Data Exchange (ETDEWEB)

    Cossoul, Emilie; Hubert-Roux, Marie; Sebban, Muriel [Normandie Université, COBRA, UMR6014 and FR3038, Université de Rouen, INSA de Rouen, CNRS, IRCOF, 1 rue Tesnière, 76821 Mont-Saint-Aignan Cedex (France); Churlaud, Florence [Arkema, Centre d’Etude de Recherche et Développement, 27470 Serquigny (France); Oulyadi, Hassan [Normandie Université, COBRA, UMR6014 and FR3038, Université de Rouen, INSA de Rouen, CNRS, IRCOF, 1 rue Tesnière, 76821 Mont-Saint-Aignan Cedex (France); Afonso, Carlos, E-mail: carlos.afonso@univ-rouen.fr [Normandie Université, COBRA, UMR6014 and FR3038, Université de Rouen, INSA de Rouen, CNRS, IRCOF, 1 rue Tesnière, 76821 Mont-Saint-Aignan Cedex (France)

    2015-01-26

    Highlights: • Solvent free approach. • Production of intact small oligomers of PEEK with ASAP ionization. • Comparison of the MS/MS spectra from M{sup +}· and [M + H]{sup +} precursor ions. • Identification of end-groups using tandem mass spectrometry. - Abstract: Recently, the interest of the coupling between atmospheric solid analysis probe (ASAP) and ion mobility–mass spectrometry has been revealed in the field of polymers. This method associates a direct ionization technique with a bi-dimensional separation method. Poly(ether ether ketones) (PEEK) belong to the family of the poly(aryl ether ketones) (PAEK) which are high performance aromatic polymers usually used in aerospace, electronics and nuclear industries. PEEK are important commercial thermoplastics with excellent chemical resistance and good mechanical properties. Because of their low solubility, few structural characterization studies of PEEK have been reported. In mass spectrometry, only MALDI-TOF analyses for polymer synthesis monitoring have been described with the use of strong acids such as sulfuric acid. This work demonstrates that ASAP is particularly efficient for analysis of PEEK in a solvent free approach with the production of intact small oligomers (n ≤ 2). Five types of PEEK oligomers with different end-groups were evidenced. With MALDI-TOF, the same end-groups with almost the same relative abundance were obtained which support the hypothesis that the oligomers detected in ASAP are intact small oligomers and not fragments or pyrolysis products. This is particularly interesting as generally the ASAP analysis of polymers yields pyrolysis products with the loss of end-group information. The end-groups assignments have been confirmed by tandem mass spectrometry (MS/MS) experiments on the M{sup +}· molecular ions, which allowed highlighting some specific neutral or radical losses as well as two diagnostic product ions. Thus, ASAP-IM/MS/MS proves to be a fast and efficient

  11. Analysis of volatile compounds emitted from fresh Syringa oblata flowers in different florescence by headspace solid-phase microextraction-gas chromatography-mass spectrometry.

    Science.gov (United States)

    Li, Zu-Guang; Lee, Maw-Rong; Shen, De-Long

    2006-08-18

    In this study, a simple and solvent-free method was developed for determination of the volatile compounds from fresh flowers of Syringa oblata using headspace solid-phase microextraction and gas chromatography-mass spectrometry. The SPME parameters were studied, the optimum conditions of a 65mum polydimethylsiloxan/divinylbenezene (PDMS/DVB), extraction temperature of 25 degrees C and extraction time of 30 min were obtained and applied to extraction of the volatile compounds emitted from fresh flowers of S. oblata. The volatile compounds released from fresh flowers of S. oblata were separated and identified by GC-MS. Lilac aldehyde A, lilac aldehyde B, lilac aldehyde C, lilac aldehyde D, lilac alcohol A, lilac alcohol B, lilac alcohol C, lilac alcohol D, alpha-pinene, sabinene, beta-pinene, myrcene, d-limonene, eucalyptol, cis-ocimene, benzaldehyde, terpinolene, linalool, benzene acetaldehyde, alpha-terpineol, p-methoxyanisole, p-anisaldehyde, (Z,E)-alpha-farnesene and (E,E)-alpha-farnesene were the most abundant volatiles released from fresh flowers of S. oblata var. alba. The relative contents of main volatile fragrance were found to be different in emissions from two varieties of S. oblata flowers (white or purple in color). The four isomers of lilac alcohol and four isomer lilac aldehyde were the characteristic components of the scent of fresh flowers of S. oblata. The main volatile fragrance from fresh flowers of S. oblata var. alba in different florescence ((A) flower buds; (B) at the early stage of flower blooming; (C) during the flower blooming; (D) at the end of flower blooming; (E) senescence) were studied in this paper. The results demonstrated that headspace SPME-GC-MS is a simple, rapid and solvent-free method suitable for analysis of volatile compounds emitted from fresh flowers of S. oblata in different florescence.

  12. Analysis of lignocellulose derived phenolic monomers by headspace solid-phase microextraction and gas chromatography.

    Science.gov (United States)

    Kolb, Michaela; Schieder, Doris; Faulstich, Martin; Sieber, Volker

    2013-09-13

    A headspace solid-phase microextraction method with subsequent GC-MS (HS-SPME/GC-MS) was established for the quantitative analysis of volatile lignin derived phenolic monomers in complex aqueous solutions. Extraction was done using a polyacrylate fiber. The optimization of HS-SPME - parameters was performed using a multi component model solution of six representative phenolic monomers identified in liquid hot water (LHW) supernatants of hydrothermally treated lignocellulosic biomass: p-coumaric acid, guaiacol, vanillin, acetosyringone, 4-hydroxy-3-methoxyphenylacetone, and acetophenone. Plackett-Burman design was applied for pre-evaluation and 2(3) central composite designs with star points for parameter optimization. LOQ (S/N>10) and LOD (S/N>3) were determined for 12 phenols yielding LOQ of <0.005-618nM and LOD of <0.005-412nM. Within-day and between-day tests (n=6) showed different results for the tested phenols. RSD ranged from 2% to 30% and recovery rates from 99% to 160% in LHW matrix. Tests on storage of LHW supernatants for several weeks indicated a considerable influence of temperature on the stability of the solutions which may even have to be taken into account for auto sampler handling. All in all the method allows a fast and solvent free analysis requiring low sample volumes making it a powerful tool for screening or high-throughput analysis of aqueous solutions of lignin derived aromatics. Copyright © 2013. Published by Elsevier B.V.

  13. Analysis

    DEFF Research Database (Denmark)

    Mathiesen, Brian Vad; Liu, Wen; Zhang, Xiliang

    2014-01-01

    three major technological changes: energy savings on the demand side, efficiency improvements in energy production, and the replacement of fossil fuels by various sources of renewable energy. Consequently, the analysis of these systems must include strategies for integrating renewable sources...

  14. Analysis

    CERN Document Server

    Maurin, Krzysztof

    1980-01-01

    The extraordinarily rapid advances made in mathematics since World War II have resulted in analysis becoming an enormous organism spread­ ing in all directions. Gone for good surely are the days of the great French "courses of analysis" which embodied the whole of the "ana­ lytical" knowledge of the times in three volumes-as the classical work of Camille Jordan. Perhaps that is why present-day textbooks of anal­ ysis are disproportionately modest relative to the present state of the art. More: they have "retreated" to the state before Jordan and Goursat. In recent years the scene has been changing rapidly: Jean Dieudon­ ne is offering us his monumentel Elements d'Analyse (10 volumes) written in the spirit of the great French Course d'Analyse. To the best of my knowledge, the present book is the only one of its size: starting from scratch-from rational numbers, to be precise-it goes on to the theory of distributions, direct integrals, analysis on com­ plex manifolds, Kahler manifolds, the theory of sheave...

  15. Influence of fibre coating in headspace solid-phase microextraction-gas chromatographic analysis of aromatic and medicinal plants.

    Science.gov (United States)

    Bicchi, C; Drigo, S; Rubiolo, P

    2000-09-15

    Solid-phase microextraction (SPME) is a solvent-free technique, which is well established in headspace analysis since it is sensitive, because of the concentration factor achieved by the fibres, and selective, because of different coating materials which can be used. The performance of eight commercially available SPME fibres was compared to evaluate the recoveries of some characteristic components with different polarities and structures present in the headspace of four aromatic and medicinal plants: rosemary (Rosmarinus officinalis L.), sage (Salvia officinalis L.), thyme (Thymus vulgaris L.) and valerian (Valeriana officinalis L.). The relative concentration capacity of each fibre on the same components of each plant was also determined by comparing their abundance with that obtained by classical static-headspace GC. The partition coefficient, K1, between the headspace gaseous phase and SPME polymeric coating, and the relative concentration factors, of some of the characteristic components of the plant investigated dissolved in dibutyl phtalate, were also determined, under rigorously standardised analysis conditions. The results showed that the most effective fibres were those consisting of two components, i.e., a liquid phase (polydimethylsiloxane) and a porous solid (carboxen or divinylbenzene, or both).

  16. Solvent-free nanofluid with three structure models based on the composition of a MWCNT/SiO2 core and its adsorption capacity of CO2

    Science.gov (United States)

    Yang, R. L.; Zheng, Y. P.; Wang, T. Y.; Li, P. P.; Wang, Y. D.; Yao, D. D.; Chen, L. X.

    2018-01-01

    A series of core/shell nanoparticle organic/inorganic hybrid materials (NOHMs) with different weight ratios of two components, consisting of multi-walled carbon nanotubes (MWCNTs) and silicon dioxide (SiO2) as the core were synthesized. The NOHMs display a liquid-like state in the absence of solvent at room temperature. Five NOHMs were categorized into three kinds of structure states based on different weight ratio of two components in the core, named the power strip model, the critical model and the collapse model. The capture capacities of these NOHMs for CO2 were investigated at 298 K and CO2 pressures ranging from 0 to 5 MPa. Compared with NOHMs having a neat MWCNT core, it was revealed that NOHMs with the power strip model show better adsorption capacity toward CO2 due to its lower viscosity and more reactive groups that can react with CO2. In addition, the capture capacities of NOHMs with the critical model were relatively worse than the neat MWCNT-based NOHM. The result is attributed to the aggregation of SiO2 in these samples, which may cause the consumption and hindrance of reactive groups. However, the capture capacity of NOHMs with the collapse model was the worst of all the NOHMs, owing to its lowest content of reactive groups and hollow structure in MWCNTs. In addition, they presented non-interference of MWCNTs and SiO2 without aggregation state.

  17. Disentangled solid state and metastable polymer melt; a solvent free route to high-modulus high-strength tapes and films of UHMWPE

    Science.gov (United States)

    Rastogi, Sanjay

    2013-03-01

    Ultra High Molecular Weight Polyethylene (UHMWPE) having average molar mass greater than a million g/mol is an engineering polymer. Due to its light-weight, high abrasion resistance and biocompatibility it is used for demanding applications such as body armour, prostheses etc. At present, because of its high melt viscosity to achieve the uniaxial/biaxial properties in the form of fibers/films the polymer is processed via solution route where nearly 95wt% of the solvent is used to process 5wt% of the polymer. In past several attempts have been made to process the polymer without using any solvent. However, compared to the solvent processing route the achieved mechanical properties were rather poor. Here we show that by controlled synthesis it is feasible to obtain UHMWPE that could be processed free of solvent to make uniaxial tapes and biaxial films, having unprecedented mechanical properties, exceeding that of the solution spun fibers. We address some of the fundamental aspects of chemistry, physics, rheology and processing for the development of desired morphological features to achieve the ultimate mechanical properties in tapes and films. The paper will also address the metastable melt state obtained on melting of the disentangled crystals and its implication on rheology in linear and nonlinear viscoelastic region. Solid state NMR studies will be applied to establish disentangled state in solid state to the polymerisation conditions. References: Macromolecules 2011, 44(14), 5558-5568; Nature Materials 2005, 4, 635-641; Phys Rev Lett 2006, 96(21), 218303-218205. The authors acknowledge financial support by the Dutch Polymer Institute.

  18. Solvent-free, improved synthesis of pure bixbyite phase of iron and manganese mixed oxides as low-cost, potential oxygen carrier for chemical looping with oxygen uncoupling

    Czech Academy of Sciences Publication Activity Database

    Mungse, P.B.; Saravanan, G.; Nishibori, M.; Šubrt, Jan; Labhsetwar, N.K.

    2017-01-01

    Roč. 89, č. 4 (2017), s. 511-521 ISSN 0033-4545. [International Conference Solid State Chemistry 2016 /12./. Prague, 18.09.2016-23.09.2016] Institutional support: RVO:61388980 Keywords : CO capture and sequestration * Lattice * Mixed metal oxides * Reactive oxygen * Thermal power plants Subject RIV: CA - Inorganic Chemistry OBOR OECD: Inorganic and nuclear chemistry Impact factor: 2.626, year: 2016

  19. Gypsum-Catalyzed One-Pot Synthesis of 3,4-Dihydropyrimidin-2(1H Under Solvent-Free Conditions

    Directory of Open Access Journals (Sweden)

    Taoues Boumoud

    2011-01-01

    Full Text Available In view of the emerging importance of the green chemistry principles in chemical and pharmaceutical industries, we disclose, herein, a new economic approach producing the biologically active dihydropyrimidinones in good yields using the solventless one-pot Biginelli condensation in the presence of gypsum as an environmental friendly and recycled catalyst.

  20. Ionic liquid-silica precursors via solvent-free sol-gel process and their application in epoxy-amine network: a theoretical/experimental study

    Czech Academy of Sciences Publication Activity Database

    Perchacz, Magdalena; Donato, R. K.; Seixas, L.; Zhigunov, Alexander; Konefal, Rafal; Serkis-Rodzen, Magdalena; Beneš, Hynek

    2017-01-01

    Roč. 9, č. 19 (2017), s. 16474-16487 ISSN 1944-8244 R&D Projects: GA ČR(CZ) GA17-08273S; GA MŠk(CZ) LO1507 Institutional support: RVO:61389013 Keywords : 3D POSS structures * epoxy-silica hybrid material * IL-silica precursor Subject RIV: CD - Macromolecular Chemistry OBOR OECD: Polymer science Impact factor: 7.504, year: 2016

  1. Skin penetration and photoprotection of topical formulations containing benzophenone-3 solid lipid microparticles prepared by the solvent-free spray-congealing technique.

    Science.gov (United States)

    Martins, Rodrigo Molina; Siqueira, Silvia; Fonseca, Maria José Vieira; Freitas, Luis Alexandre Pedro

    2014-01-01

    Solid-lipid microparticles loaded with high amounts of the sunscreen UV filter benzophenone-3 were prepared by spray congealing with the objective of decreasing its skin penetration and evaluate whether the sunscreen's photoprotection were impaired by the microencapsulation process. The microparticles were produced using the natural lipids carnauba wax or bees wax and three different concentrations of benzophenone-3 (30, 50 and 70%) using spray congealing technique. The microparticles presented properties suitable for topical application, such as spherical morphology, high encapsulation efficiency (95.53-102.2%), average particle sizes between 28.5 and 60.0 µm with polydispersivities from 1.2 to 2.5. In studies of in vitro skin penetration and preliminary stability, formulations of gel cream containing carnauba wax solid lipid microparticles and 70% benzophenone-3 when compared to the formulation added of bees wax solid-lipid microparticles containing 70% benzophenone-3, was stable considering the several parameters evaluated and were able to decrease the penetration of the UV filter into pig skin. Moreover, the formulations containing solid lipid microparticles with 70% benzophenone-3 increased the photoprotective capacity of benzophenone-3 under UV irradiation. The results show that spray-congealed microparticles are interesting solid forms to decrease the penetration solar filters in the skin without compromising their photoprotection.

  2. Parameters affecting incorporation and by-product formation during the production of structured phospholipids by lipase-catalyzed acidolysis in solvent free system

    DEFF Research Database (Denmark)

    Vikbjerg, Anders Falk; Mu, Huiling; Xu, Xuebing

    2005-01-01

    By-product formation is a serious problem in the lipase-catalyzed acyl exchange of phospholipids (PL). By-products are formed due to parallel hydrolysis reactions and acyl migration in the reaction system. A clear elucidation of these side reactions is important for practical operation in order t...

  3. Green Synthesis of Acetals/Ketals: Efficient Solvent-Free Process for the Carbonyl/Hydroxyl Group Protection Catalyzed by SBA-15 Materials

    Czech Academy of Sciences Publication Activity Database

    Pérez-Mayoral, E.; Martín-Aranda, R. M.; López-Peinado, A. J.; Ballesteros, P.; Zukal, Arnošt; Čejka, Jiří

    2009-01-01

    Roč. 52, 1-2 (2009), s. 148-152 ISSN 1022-5528 R&D Projects: GA AV ČR 1QS400400560 Institutional research plan: CEZ:AV0Z40400503 Keywords : acid and basic heterogeneous catalysts * mesoporous molecular sieves * acatalation reactions * fine chemicals Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 2.379, year: 2009

  4. A new magnetically recoverable catalyst promoting the synthesis of 1,4-dihydropyridine and polyhydroquinoline derivatives via the Hantzsch condensation under solvent-free conditions

    Energy Technology Data Exchange (ETDEWEB)

    Taheri, Narges; Heidarizadeh, Fariba; Kiasat, Alireza

    2017-04-15

    In the current study, 1,4-dihydropyridine and polyhydroquinoline derivatives were efficiently synthesized under solvent-less conditions with a magnetic catalyst containing novel acidic ionic liquid functionalized silica modified Fe{sub 3}O{sub 4} nanoparticles through a four component combination of β-ketoester, aldehydes and ammonium acetate (1, 2, 2). Several approaches have been reported for synthesizing these derivatives, while each of these approaches have some weaknesses including long time of reaction, excess of volatile organic solvent, low efficiency, costly reagents, complex operation, high temperatures, production of a number of side products, and difficult catalyst recovery. The simple operation, short time of reaction (5–30 min) and the high efficiency (80–94%) are the special advantages of this technique. The immobilized catalyst exhibited an appropriate thermal stability and excellent recyclability. Different methods such as FT-IR, SEM, EDX, TGA-DTA, and VSM were used to confirm and characterize the catalyst. - Highlights: • A new acidic ionic liquid were first synthesized and applied in both symmetric and asymmetric hantzsch reactions for preparing 1, 4-dihydropyridine and polyhydroquinoline derivatives with high efficiencies under solvent-less conditions. • The immobilized catalyst exhibited an appropriate thermal stability and excellent recyclability. • The nanomagnetic catalyst could be recovered from solution with an external magnet at once, allowing undemanding recovery and reuse. • The catalyst was reused for five times with no considerable decrease in catalytic activity.

  5. Effect of nanoparticle metal composition: mono- and bimetallic gold/copper dendrimer stabilized nanoparticles as solvent-free styrene oxidation catalysts

    Science.gov (United States)

    Blanckenberg, A.; Kotze, G.; Swarts, A. J.; Malgas-Enus, R.

    2018-02-01

    A range of mono- and bimetallic AumCun nanoparticles (NPs), with varying metal compositions, was prepared by using a third-generation diaminobutane poly(propylene imine) (G3 DAB-PPI) dendrimer, modified with alkyl chains, as a stabilizer. It was found that the length of the peripheral alkyl chain, ( M1 (C15), M2 (C11), and M3 (C5)), had a direct influence on the average nanoparticle size obtained, confirming the importance of the nanoparticle stabilizer during synthesis. The Au NPs showed the highest degree of agglomeration and polydispersity, whereas the Cu NPs were the smallest and most monodisperse of the NPs. The bimetallic NPs sizes were found to vary between those of the monometallic NPs, depending on the metal composition. Interestingly, the bimetallic NPs were found to be the most stable, showing very little variation in size over time, even up to 9 months. The DSNs were evaluated in the catalytic oxidation of styrene, using either H2O2 or TBHP as oxidant. Here, we show that the bimetallic DSNs are indeed the superior catalysts when compared to their monometallic analogues, under the same reaction conditions, since a good compromise between stability and activity can be achieved where the Au provides catalytic activity and the Cu serves as a stabilizer. These AumCun bimetallic DSNs present a less expensive and more stable catalyst with negligible loss of activity, opening the door to green catalysis.

  6. Influences of poly(ether urethane) introduction on poly(ethylene oxide) based polymer electrolyte for solvent-free dye-sensitized solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Zhou Yanfang; Xiang Wanchun [CAS Key Laboratory of Photochemistry, Institute of Chemistry, BNLMS, Chinese Academy of Sciences, Beijing 100190 (China); Graduate School of Chinese Academy of Sciences, Beijing 100049 (China); Chen Shen; Fang Shibi; Zhou Xiaowen; Zhang Jingbo [CAS Key Laboratory of Photochemistry, Institute of Chemistry, BNLMS, Chinese Academy of Sciences, Beijing 100190 (China); Lin Yuan [CAS Key Laboratory of Photochemistry, Institute of Chemistry, BNLMS, Chinese Academy of Sciences, Beijing 100190 (China)], E-mail: linyuan@iccas.ac.cn

    2009-11-01

    A poly(ether urethane) (PEUR)/poly(ethylene oxide) (PEO)/SiO{sub 2} based nanocomposite polymer is prepared and employed in the construction of high efficiency all-solid-state dye-sensitized nanocrystalline solar cells. The introduction of low-molecular weight PEUR prepolymer into PEO electrolyte has greatly enhance the electrolyte performance by both improving the interfacial contact properties of electrode/electrolyte and decreasing the PEO crystallization, which were confirmed by XRD and SEM characteristics. The effects of polymer composition, nano SiO{sub 2} content on the ionic conductivity and I{sub 3}{sup -} ions diffusion of polymer-blend electrolyte are investigated. The optimized composition yields an energy conversion efficiency of 3.71% under irradiation by white light (100 mW cm{sup -2})

  7. A toxic organic solvent-free technology for the preparation of PEGylated paclitaxel nanosuspension based on human serum albumin for effective cancer therapy

    Science.gov (United States)

    Yin, Tingjie; Dong, Lihui; Cui, Bei; Wang, Lei; Yin, Lifang; Zhou, Jianping; Huo, Meirong

    2015-01-01

    Clinically, paclitaxel (PTX) is one of most commonly prescribed therapies against a wide range of solid neoplasms. Despite its success, the clinical applicability of PTX (Taxol®) is severely hampered by systemic toxicities induced by Cremophor EL. While attempts to bypass the need for Cremophor EL have been developed through platforms such as Abraxane™, nab™ relies heavily on the use of organic solvents, namely, chloroform. The toxicity introduced by residual chloroform poses a potential risk to patient health. To mitigate the toxicities of toxic organic solvent-based manufacture methods, we have designed a method for the formulation of PTX nanosuspensions (PTX-PEG [polyethylene glycol]-HSA [human serum albumin]) that eliminates the dependence on toxic organic solvents. Coined the solid-dispersion technology, this technique permits the dispersion of PTX into PEG skeleton without the use of organic solvents or Cremophor EL as a solubilizer. Once the PTX-PEG dispersion is complete, the dispersion can be formulated with HSA into nanosuspensions suitable for intravenous administration. Additionally, the incorporation of PEG permits the prolonged circulation through the steric stabilization effect. Finally, HSA-mediated targeting permits active receptor-mediated endocytosis for enhanced tumor uptake and reduced side effects. By eliminating the need for both Cremophor EL and organic solvents while simultaneously increasing antitumor efficacy, this method provides a superior alternative to currently accepted methods for PTX delivery. PMID:26715846

  8. Solvent-free copper-catalyzed click chemistry for the synthesis of N-heterocyclic hybrids based on quinoline and 1,2,3-triazole

    Directory of Open Access Journals (Sweden)

    Martina Tireli

    2017-11-01

    Full Text Available Copper-catalyzed mechanochemical click reactions using Cu(II, Cu(I and Cu(0 catalysts have been successfully implemented to provide novel 6-phenyl-2-(trifluoromethylquinolines with a phenyl-1,2,3-triazole moiety at O-4 of the quinoline core. Milling procedures proved to be significantly more efficient than the corresponding solution reactions, with up to a 15-fold gain in yield. Efficiency of both solution and milling procedures depended on the p-substituent in the azide reactant, resulting in H < Cl < Br < I reactivity bias. Solid-state catalysis using Cu(II and Cu(I catalysts entailed the direct involvement of the copper species in the reaction and generation of highly luminescent compounds which hindered in situ monitoring by Raman spectroscopy. However, in situ monitoring of the milling processes was enabled by using Cu(0 catalysts in the form of brass milling media which offered a direct insight into the reaction pathway of mechanochemical CuAAC reactions, indicating that the catalysis is most likely conducted on the surface of milling balls. Electron spin resonance spectroscopy was used to determine the oxidation and spin states of the respective copper catalysts in bulk products obtained by milling procedures.

  9. Controlled preparation of amphiphilic triblock-copolyether in a metal- and solvent-free approach for tailored structure-directing agents.

    Science.gov (United States)

    Balint, Alexander; Papendick, Marius; Clauss, Manuel; Müller, Carsten; Giesselmann, Frank; Naumann, Stefan

    2018-02-27

    Under mild conditions, PPO-PEO-PPO ("reverse Pluronics") and PBO-PEO-PBO copolyether were generated by way of N-heterocyclic olefin-based organocatalysis. Reverse Pluronics with molar masses > 20 000 g mol -1 could be synthesized with excellent control (Đ M ≤ 1.03) and were converted into (ordered) mesoporous carbons via organic self-assembly to showcase the need for tailor-made copolymer as structure-directing agent.

  10. Solvent-free preparation of polylactic acid fibers by melt electrospinning using umbrella-like spray head and alleviation of problematic thermal degradation

    Directory of Open Access Journals (Sweden)

    Liu Yong

    2012-01-01

    Full Text Available Melt electrospinning is an even simpler and safer method compared with the solution electrospinning in the production of ultra-fine fibers. Polylactic acid (PLA is a biodegradable and resorbable aliphatic ester that has received significant attention in recent years. PLA is easily degradable at high temperature in the process of melt electrospinning. High efficient fibers were made using our designed umbrella-like spray head spinning facility in this work. To find how to alleviate the problematic degradation and what factors could be relevant to degradation, temperature, relative molecular mass, Differential Scanning Calorimeter and X-ray Diffraction patterns before and after spinning were investigated and compared with each other. Results showed that fibers were facile shorten and fractured when spun at 245°C while the relative molecular mass of PLA fibers decreased markedly as compared with that spun at 210°C. To hinder the degradation, couple of experimental efforts were implemented with adding antioxidants, raising spinning voltage, lowering temperature, and reducing residence time. After such efforts, it was observed that the relative molecular mass of the PLA fibers was higher than those without inputting any efforts. The effect of antioxidant 1010 was found the most promising on the alleviation of PLA problematic thermal degradation.

  11. Hydrophobic lapatinib encapsulated dextran-chitosan nanoparticles using a toxic solvent free method: fabrication, release property & in vitro anti-cancer activity.

    Science.gov (United States)

    Mobasseri, Rezvan; Karimi, Mahdi; Tian, Lingling; Naderi-Manesh, Hossein; Ramakrishna, Seeram

    2017-05-01

    Dextran sulfate-chitosan (DS-CS) nanoparticles, which possesses properties such as nontoxicity, biocompatibility and biodegradability have been employed as drug carriers in cancer therapy. In this study, DS-CS nanoparticles were synthesized and their sizes were controlled by a modification of the divalent cations cross-linkers (Ca 2+ , Zn 2+ or Mg 2+ ). Based on the optimized processing parameters, lapatinib encapsulated nanoparticles were developed and characterized by Dynamics Light Scattering (DLS) measurements, Fourier Transform Infrared Spectroscopy (FT-IR) and Scanning Electron Microscopy (SEM). Calcium chloride (CaCl 2 ) facilitated the formation of bare (100.3±0.80nm) and drug-loaded nanoparticles (134.3±1.3nm) with narrow size distributions being the best cross-linker. The surface potential of drug-loaded nanoparticles was -16.8±0.47mV and its entrapment and loading efficiency were 76.74±1.73% and 47.36±1.27%, respectively. Cellular internalization of nanoparticles was observed by fluorescence microscopy and MTT (3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide) assay was used to determine cytotoxicity of bare and drug-loaded nanoparticles in comparison to the free drug lapatinib. The MTT assay showed that drug-loaded nanoparticles had comparable anticancer activity to free drug within a duration of 48h. The aforementioned results showed that the DS-CS nanoparticles were able to entrap, protect and release the hydrophobic drug, lapatinib in a controlled pattern and could further serve as a suitable drug carrier for cancer therapy. Copyright © 2016 Elsevier B.V. All rights reserved.

  12. Supercritical diethylamine facilitated loading of ultrafine Ru particles on few-layer graphene for solvent-free hydrogenation of levulinic acid to γ-valerolactone

    Science.gov (United States)

    Tao, Hengcong; Ding, Jingjing; Xie, Chao; Gao, Yunnan; Song, Jinliang; Sun, Zhenyu

    2018-02-01

    We demonstrate a facile and versatile method to grow Ru particles uniformly on pristine few-layer graphene (FLG) in supercritical diethylamine. In particular, a large number of Ru subnanometer clusters less than 1.0 nm were observed. The particle size can be tuned by manipulating the loading content of Ru and controlling the reaction temperature. The resulting Ru/FLG showed remarkably high activity, selectivity, and reusability towards the hydrogenation of levulinic acid to γ-valerolactone. This method is flexible, and can be extended to the synthesis of a variety of other ultrafine metal particles supported on FLG.

  13. p -Dimethylaminopyridine (DMAP: A highly efficient catalyst for one pot, solvent free synthesis of substituted 2-amino-2-chromenes under microwave irradiation

    Directory of Open Access Journals (Sweden)

    Kamlesh R. Desale

    2012-01-01

    Full Text Available A highly efficient, green and expeditious method is described for the synthesis of substituted 2-amino-2-chromenes employing one pot three component condensation of aromatic aldehydes, malononitrile and activated phenol in presence of p-dimethylaminopyridine (10 mol % as a catalyst under microwave irradiation. The present method is operationally simple and offers many advantages such as high yield, short reaction time and simple workup.

  14. Spectroscopic analysis and molecular docking of imidazole derivatives and investigation of its reactive properties by DFT and molecular dynamics simulations

    Science.gov (United States)

    Thomas, Renjith; Hossain, Mossaraf; Mary, Y. Sheena; Resmi, K. S.; Armaković, Stevan; Armaković, Sanja J.; Nanda, Ashis Kumar; Ranjan, Vivek Kumar; Vijayakumar, G.; Van Alsenoy, C.

    2018-04-01

    Solvent-free synthesis pathway for obtaining two imidazole derivatives (2-chloro-1-(4-methoxyphenyl)-4,5-dimethyl-1H-imidazole (CLMPDI) and 1-(4-bromophenyl)-2-chloro-4,5-dimethyl-1H-imidazole (BPCLDI) has been reported in this work, followed by detailed experimental and computational spectroscopic characterization and reactivity study. Spectroscopic methods encompassed IR, FT-Raman and NMR techniques, with the mutual comparison of experimentally and computationally obtained results at DFT/B3LYP level of theory. Reactivity study based on DFT calculations encompassed molecular orbitals analysis, followed by calculations of molecular electrostatic potential (MEP) and average local ionization energy (ALIE) values, Fukui functions and bond dissociation energies (BDE). Additionally, the stability of title molecules in water has been investigated via molecular dynamics (MD) simulations, while interactivity with aspulvinonedimethylallyl transferase protein has been evaluated by molecular docking procedure. CLMPDI compound showed antimicrobial activity against all four bacterial strain in both gram positive and gram negative bacteria while, BPCLDI showed only in gram positive bacteria, Staphylococcus Aureus (MTCC1144). The first order hyperpolarizability of CLMPDI and BPCLDI are 20.15 and 6.10 times that of the standard NLO material urea.

  15. Analysis of Volatile Components of Adenosma indianum (Lour. Merr. by Steam Distillation and Headspace Solid-Phase Microextraction

    Directory of Open Access Journals (Sweden)

    Zhi Zeng

    2013-01-01

    Full Text Available The essential oil of Adenosma indianum (Lour. Merr. plays an important role in its antibacterial and antiphlogistic activities. In this work, the volatile components were extracted by steam distillation (SD and headspace solid-phase microextraction (HS-SPME and analysed by gas chromatography-mass spectrometry (GC-MS. A total of 49 volatile components were identified by GC-MS, and the major volatile components were α-limonene (20.59–35.07%, fenchone (15.79–31.81%, α-caryophyllene (6.98–10.32%, β-caryophyllene (6.98–10.19%, and piperitenone oxide (1.96–11.63%. The comparison of the volatile components from A. indianum (Lour. Merr. grown in two regions of China was reported. Also, the comparison of the volatile components by SD and HS-SPME was discussed. The results showed that the major volatile components of A. indianum (Lour. Merr. from two regions of China were similar but varied with different extraction methods. These results were indicative of the suitability of HS-SPME method for simple, rapid, and solvent-free analysis of the volatile components of the medicinal plants.

  16. Immersed single-drop microextraction interfaced with sequential injection analysis for determination of Cr(VI) in natural waters by electrothermal-atomic absorption spectrometry

    International Nuclear Information System (INIS)

    Pena, Francisco; Lavilla, Isela; Bendicho, Carlos

    2008-01-01

    Single-drop microextraction (SDME) and sequential injection analysis have been hyphenated for ultratrace metal determination by Electrothermal-Atomic Absorption Spectrometry (ETAAS). The novel method was targeted on extraction of the Cr(VI)-APDC chelate and encompasses the potential of SDME as a miniaturized and virtually solvent-free preconcentration technique, the ability of sequential injection analysis to handle samples and the versatility of furnace autosamplers for introducing microliter samples in ETAAS. The variables influencing the microextraction of Cr(VI) onto an organic solvent drop, i.e., type of organic solvent, microextraction time, stirring rate of the sample solution, drop volume, immersion depth of the drop, salting-out effect, temperature of the sample, concentration of the complexing agent and pH of the sample solution were fully investigated. For a 5 and 20 min microextraction time, the preconcentration factors were 20 and 70, respectively. The detection limit was 0.02 μg/L of Cr(VI) and the repeatability expressed as relative standard deviation was 7%. The SDME-SIA-ETAAS technique was validated against BCR CRM 544 (lyophilized solution) and applied to ultrasensitive determination of Cr(VI) in natural waters

  17. Recent progress, challenges and trends in trace determination of drug analysis using molecularly imprinted solid-phase microextraction technology.

    Science.gov (United States)

    Ansari, Saeedeh; Karimi, Majid

    2017-03-01

    The quantification of drugs in biological samples is a significant task for determination of the physiological efficiency in evaluated drugs in the drug discovery. To analysis of the chemical compounds at the trace and ultratrace levels, adequate analytical procedures should be applied. Therefore, sample preparation method undoubtedly is the most important stage in the trace determination process. In spite of the great growth of analytical instrumentation during the recent years, sample preparation is still nowadays considered the impasse of the all analytical procedure, especially in drugs analysis. Because of the low concentration level of drugs in blood, plasma, and the diversity of the metabolites, the chosen extraction technique should be almost perfect. Solid-phase microextraction (SPME) is a powerful, simple, fast and an equilibrium-based sample preparation method that permits integration of sampling, sample clean-up, and pre-concentration in a single solvent-free step for chemical analysis. Molecularly imprinted polymers (MIPs) that provided by the presence of a template during their synthesis are the stable polymers with molecular recognition abilities and excellent materials which provide selectivity to sample preparation. Because of its characteristics such as easy preparation, high selectivity, and chemical stability, MIP is widely utilized in many analytical fields. Accordingly, the molecular imprinting and SPME methods combination would prepare a strong analytical instrumentation which comprises simplicity, flexibility, and the selectivity characteristics of both methods. This review focuses on the application of solid-phase microextraction method coupled with molecularly imprinted polymers, namely molecularly imprinted solid-phase microextraction (MISPME), for trace determination in drug analysis. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Rapid analysis of the essential oil components of dried Zanthoxylum bungeanum Maxim by Fe2O3-magnetic-microsphere-assisted microwave distillation and simultaneous headspace single-drop microextraction followed by GC-MS.

    Science.gov (United States)

    Ye, Qing

    2013-06-01

    In this work, microwave distillation assisted by Fe2 O3 magnetic microspheres (FMMS) and headspace single-drop microextraction were combined, and developed for determination of essential oil compounds in dried Zanthoxylum bungeanum Maxim (ZBM). The FMMS were used as microwave absorption solid medium for dry distillation of dried ZBM. Using the proposed method, isolation, extraction, and concentration of essential oil compounds can be carried out in a single step. The experimental parameters including extraction solvent, solvent volume, microwave power, irradiation time, and the amount of added FMMS, were studied. The optimal analytical conditions were: 2.0 μL decane as the extraction solvent, microwave power of 300 W, irradiation time of 2 min, and the addition of 0.1 g FMMS to ZBM. The method precision was from 4 to 10%. A total of 52 compounds were identified by the proposed method. The conventional steam distillation method was also used for the analysis of essential oil in dried ZBM and only 31 compounds were identified by steam distillation method. It was found that the proposed method is a simple, rapid, reliable, and solvent-free technique for the determination of volatile compounds in Chinese herbs. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  19. Semiquantitative analysis of 3-butenyl isothiocyanate to monitor an off-flavor in mustard seeds and glycosinolates screening for origin identification.

    Science.gov (United States)

    Frank, Nancy; Dubois, Mathieu; Goldmann, Till; Tarres, Adrienne; Schuster, Elke; Robert, Fabien

    2010-03-24

    The present paper describes the development of an analytical method for the semiquantitative analysis of 3-butenyl isothiocyanate in mustard seeds, this compound being linked to an undesirable (at least for the European palate) off-flavor. 3-Butenyl isothiocyanate is one of the enzymatic degradation products of gluconapin, a member of the glucosinolate family of compounds. A headspace-gas chromatography-mass spectrometry (HS-GC-MS) method has been developed for the rapid analysis of 3-butenyl isothiocyanate in mustard seeds. The cross-check of this HS-GC-MS method has been made on the basis of the analysis of the native gluconapin using liquid chromatography coupled to time-of-flight mass spectrometry (LC-TOF-MS). Both techniques gave comparable results. The HS-GC-MS method was kept as the method of choice as it is rapid and solvent-free. Because yellow mustard seeds do not normally contain gluconapin, its presence in such seeds above the limit of detection was already considered as a criterion for potentially problematic mustard batches. However, "organoleptically" acceptable brown mustard seeds already contained measurable amounts of gluconapin and had to be differentiated from mustard seeds containing nonacceptable levels of gluconapin, as it is typically the case for brown mustard originating from the Indian subcontinent. Thus, a 3-butenyl isothiocyanate content "cut point" has been established to discriminate between batches. This limit could then be applied for the acceptance or rejection of mustard seed batches. In addition, LC-TOF-MS screening of mustard seeds from different geographic origins showed the heterogeneity of the glucosinolate profile and the difficulty to find good origin markers.

  20. Bio-refinery of orange peels waste: A new concept based on integrated green and solvent free extraction processes using ultrasound and microwave techniques to obtain essential oil, polyphenols and pectin

    OpenAIRE

    Boukroufa, Meryem; Petigny, Loic; Rakotomanomana, Njara

    2015-01-01

    In this study, extraction of essential oil, polyphenols and pectin from orange peel has been optimized using microwave and ultrasound technology without adding any solvent but only ‘‘in situ’’ water which was recycled and used as solvent. The essential oil extraction performed by Microwave Hydrodiffusion and Gravity (MHG) was optimized and compared to steam distillation extraction (SD). No significant changes in yield were noticed: 4.22 ± 0.03% and 4.16 ± 0.05% for MHG and SD, respectively. A...

  1. Ultrasensitive, simple and solvent-free micro-assay for determining sulphite preservatives (E220-228) in foods by HS-SDME and UV-vis micro-spectrophotometry.

    Science.gov (United States)

    Gómez-Otero, E; Costas, M; Lavilla, I; Bendicho, C

    2014-03-01

    A new method based on headspace single-drop microextraction in combination with UV-vis micro-spectrophotometry has been developed for the ultrasensitive determination of banned sulphite preservatives (E220-228) in fruits and vegetables. Sample acidification was used for SO2 generation, which is collected onto a 5,5'-dithiobis-(2-nitrobenzoic acid) microdrop for spectrophotometric measurement. A careful study of this reaction was necessary, including conditions for SO2 generation from different sulphating salts, drop pH, 5,5'-dithiobis-(2-nitrobenzoic acid) concentration and potential interference effects. Variables influencing mass transfer (stirring, sample volume and addition of salt) and microextraction time were also studied. A simple sulphite extraction was carried out, and problems caused by oxidation during the extraction process were addressed. A high enrichment factor (380) allows the determination of low levels of free SO2 in fruits and vegetables (limit of detection 0.06 μg g(-1), limit of quantification 0.2 μg g(-1)) with an adequate precision (repeatability, relative standard deviation 5 %). In addition, the sulphiting process was studied through the monitoring of residual SO2 in a vegetal sample, thus showing the importance of a sensitive tool for SO2 detection at low levels.

  2. Recyclable Keggin Heteropolyacids as an Environmentally Benign Catalyst for the Synthesis of New 2-Benzoylamino-N-phenyl-benzamide Derivatives under Microwave Irradiations at Solvent-Free Conditions and the Evaluation of Biological Activity.

    Science.gov (United States)

    Ighilahriz-Boubchir, Karima; Boutemeur-Kheddis, Baya; Rabia, Cherifa; Makhloufi-Chebli, Malika; Hamdi, Maamar; Silva, Artur M S

    2017-12-21

    2-Benzoylamino- N -phenyl-benzamide derivatives ( 5a - h ) were prepared from 2-phenyl-3,1-(4 H )-benzoxazin-4-one 3 and substituted anilines 4a - h in the presence of a Keggin-type heteropolyacids series (H₃PW 12 O 40 ·13H₂O; H₄SiW 12 O 40 ·13H₂O; H₄SiMo 12 O 40 ·13H₂O; and H₃PMo 12 O 40 ·13H₂O) as catalysts without solvent and under microwave irradiation. We found that the use of H₃PW 12 O 40 ·13H₂O acid coupled to microwave irradiation allowed obtaining a high-yielding reaction with a short time. The compound structures were established by ¹H-NMR and 13 C-NMR. The antibacterial and antifungal activities of the synthesized compounds exhibited an inhibition of the growth of bacteria and fungi.

  3. Recyclable Keggin Heteropolyacids as an Environmentally Benign Catalyst for the Synthesis of New 2-Benzoylamino-N-phenyl-benzamide Derivatives under Microwave Irradiations at Solvent-Free Conditions and the Evaluation of Biological Activity

    Directory of Open Access Journals (Sweden)

    Karima Ighilahriz-Boubchir

    2017-12-01

    Full Text Available 2-Benzoylamino-N-phenyl-benzamide derivatives (5a–h were prepared from 2-phenyl-3,1-(4H-benzoxazin-4-one 3 and substituted anilines 4a–h in the presence of a Keggin-type heteropolyacids series (H3PW12O40·13H2O; H4SiW12O40·13H2O; H4SiMo12O40·13H2O; and H3PMo12O40·13H2O as catalysts without solvent and under microwave irradiation. We found that the use of H3PW12O40·13H2O acid coupled to microwave irradiation allowed obtaining a high-yielding reaction with a short time. The compound structures were established by 1H-NMR and 13C-NMR. The antibacterial and antifungal activities of the synthesized compounds exhibited an inhibition of the growth of bacteria and fungi.

  4. New analytical approaches for faster or greener phytochemical analyses

    NARCIS (Netherlands)

    Shen, Y.

    2015-01-01

    Summary

    Chapter 1 provides a short introduction into the constraints of phytochemical analysis. In order to make them faster, less laborious and greener, there is a clear scope for miniaturized and simplified sample preparation, solvent-free extractions

  5. Decision analysis multicriteria analysis

    International Nuclear Information System (INIS)

    Lombard, J.

    1986-09-01

    The ALARA procedure covers a wide range of decisions from the simplest to the most complex one. For the simplest one the engineering judgement is generally enough and the use of a decision aiding technique is therefore not necessary. For some decisions the comparison of the available protection option may be performed from two or a few criteria (or attributes) (protection cost, collective dose,...) and the use of rather simple decision aiding techniques, like the Cost Effectiveness Analysis or the Cost Benefit Analysis, is quite enough. For the more complex decisions, involving numerous criteria or for decisions involving large uncertainties or qualitative judgement the use of these techniques, even the extended cost benefit analysis, is not recommended and appropriate techniques like multi-attribute decision aiding techniques are more relevant. There is a lot of such particular techniques and it is not possible to present all of them. Therefore only two broad categories of multi-attribute decision aiding techniques will be presented here: decision analysis and the outranking analysis

  6. Performance analysis

    International Nuclear Information System (INIS)

    2008-05-01

    This book introduces energy and resource technology development business with performance analysis, which has business division and definition, analysis of current situation of support, substance of basic plan of national energy, resource technique development, selection of analysis index, result of performance analysis by index, performance result of investigation, analysis and appraisal of energy and resource technology development business in 2007.

  7. Instrumental analysis

    International Nuclear Information System (INIS)

    Kim, Seung Jae; Seo, Seong Gyu

    1995-03-01

    This textbook deals with instrumental analysis, which consists of nine chapters. It has Introduction of analysis chemistry, the process of analysis and types and form of the analysis, Electrochemistry on basic theory, potentiometry and conductometry, electromagnetic radiant rays and optical components on introduction and application, Ultraviolet rays and Visible spectrophotometry, Atomic absorption spectrophotometry on introduction, flame emission spectrometry and plasma emission spectrometry. The others like infrared spectrophotometry, X-rays spectrophotometry and mass spectrometry, chromatography and the other instrumental analysis like radiochemistry.

  8. Content Analysis

    Directory of Open Access Journals (Sweden)

    George Bedinelli Rossi

    2014-09-01

    Full Text Available This study introduces the various definitions and types of content analysis. This type of analysis historically presents itself as a quantitative approach to data analysis and currently shows up as a qualitative approach. The most common types are the conceptual and relational analysis. The latter receives influences of linguistic, cognitive and mental models and it is subdivided in affective extraction, analysis of proximity and cognitive mapping. Regarding the importance of this type of analysis, we have quantitative and qualitative character and the latter approach can be used to identify hypotheses, theoretical constructs or even models that can be tested by multivariate statistical techniques or even by experiments. 

  9. Sensitivity analysis

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/article/003741.htm Sensitivity analysis To use the sharing features on this page, please enable JavaScript. Sensitivity analysis determines the effectiveness of antibiotics against microorganisms (germs) ...

  10. Real analysis

    CERN Document Server

    McShane, Edward James

    2013-01-01

    This text surveys practical elements of real function theory, general topology, and functional analysis. Discusses the maximality principle, the notion of convergence, the Lebesgue-Stieltjes integral, function spaces and harmonic analysis. Includes exercises. 1959 edition.

  11. Strategic analysis

    OpenAIRE

    Bartuňková, Alena

    2011-01-01

    The goal of the master thesis is to conduct a strategic analysis of the Czech Export Bank. The work is divided in two parts, a theoretically methodological and practical part. Within theoretical part there is identified strategy by different approaches and there are described the procedures for strategic analysis. Findings from the theoretically methodological part are applied in the practical part and subsequently are used in the strategic analysis. The external analysis is characterized by ...

  12. Fourier analysis

    CERN Document Server

    Stade, Eric

    2005-01-01

    A reader-friendly, systematic introduction to Fourier analysis Rich in both theory and application, Fourier Analysis presents a unique and thorough approach to a key topic in advanced calculus. This pioneering resource tells the full story of Fourier analysis, including its history and its impact on the development of modern mathematical analysis, and also discusses essential concepts and today's applications. Written at a rigorous level, yet in an engaging style that does not dilute the material, Fourier Analysis brings two profound aspects of the discipline to the forefront: the wealth of ap

  13. Functional analysis

    CERN Document Server

    Kantorovich, L V

    1982-01-01

    Functional Analysis examines trends in functional analysis as a mathematical discipline and the ever-increasing role played by its techniques in applications. The theory of topological vector spaces is emphasized, along with the applications of functional analysis to applied analysis. Some topics of functional analysis connected with applications to mathematical economics and control theory are also discussed. Comprised of 18 chapters, this book begins with an introduction to the elements of the theory of topological spaces, the theory of metric spaces, and the theory of abstract measure space

  14. Dimensional Analysis

    Indian Academy of Sciences (India)

    Dimensional analysis is a useful tool which finds important applications in physics and engineering. It is most effective when there exist a maximal number of dimensionless quantities constructed out of the relevant physical variables. Though a complete theory of dimen- sional analysis was developed way back in 1914 in a.

  15. Applied analysis

    CERN Document Server

    Lanczos, Cornelius

    1956-01-01

    Basic text for graduate and advanced undergraduate deals with search for roots of algebraic equations encountered in vibration and flutter problems and in those of static and dynamic stability. Other topics devoted to matrices and eigenvalue problems, large-scale linear systems, harmonic analysis and data analysis, more.

  16. Incidents analysis

    International Nuclear Information System (INIS)

    Francois, P.

    1996-01-01

    We undertook a study programme at the end of 1991. To start with, we performed some exploratory studies aimed at learning some preliminary lessons on this type of analysis: Assessment of the interest of probabilistic incident analysis; possibility of using PSA scenarios; skills and resources required. At the same time, EPN created a working group whose assignment was to define a new approach for analysis of incidents on NPPs. This working group gave thought to both aspects of Operating Feedback that EPN wished to improve: Analysis of significant incidents; analysis of potential consequences. We took part in the work of this group, and for the second aspects, we proposed a method based on an adaptation of the event-tree method in order to establish a link between existing PSA models and actual incidents. Since PSA provides an exhaustive database of accident scenarios applicable to the two most common types of units in France, they are obviously of interest for this sort of analysis. With this method we performed some incident analyses, and at the same time explores some methods employed abroad, particularly ASP (Accident Sequence Precursor, a method used by the NRC). Early in 1994 EDF began a systematic analysis programme. The first, transient phase will set up methods and an organizational structure. 7 figs

  17. Factor Analysis via Components Analysis

    Science.gov (United States)

    Bentler, Peter M.; de Leeuw, Jan

    2011-01-01

    When the factor analysis model holds, component loadings are linear combinations of factor loadings, and vice versa. This interrelation permits us to define new optimization criteria and estimation methods for exploratory factor analysis. Although this article is primarily conceptual in nature, an illustrative example and a small simulation show…

  18. Dimensional Analysis

    CERN Document Server

    Tan, Qingming

    2011-01-01

    Dimensional analysis is an essential scientific method and a powerful tool for solving problems in physics and engineering. This book starts by introducing the Pi Theorem, which is the theoretical foundation of dimensional analysis. It also provides ample and detailed examples of how dimensional analysis is applied to solving problems in various branches of mechanics. The book covers the extensive findings on explosion mechanics and impact dynamics contributed by the author's research group over the past forty years at the Chinese Academy of Sciences. The book is intended for advanced undergra

  19. Recursive analysis

    CERN Document Server

    Goodstein, R L

    2010-01-01

    Recursive analysis develops natural number computations into a framework appropriate for real numbers. This text is based upon primary recursive arithmetic and presents a unique combination of classical analysis and intuitional analysis. Written by a master in the field, it is suitable for graduate students of mathematics and computer science and can be read without a detailed knowledge of recursive arithmetic.Introductory chapters on recursive convergence and recursive and relative continuity are succeeded by explorations of recursive and relative differentiability, the relative integral, and

  20. Hydroeconomic analysis

    DEFF Research Database (Denmark)

    Bauer-Gottwein, Peter; Riegels, Niels; Pulido-Velazquez, Manuel

    2017-01-01

    Hydroeconomic analysis and modeling provides a consistent and quantitative framework to assess the links between water resources systems and economic activities related to water use, simultaneously modeling water supply and water demand. It supports water managers and decision makers in assessing...... trade-offs between different water uses, different geographic regions, and various economic sectors and between the present and the future. Hydroeconomic analysis provides consistent economic performance criteria for infrastructure development and institutional reform in water policies and management...... organizations. This chapter presents an introduction to hydroeconomic analysis and modeling, and reviews the state of the art in the field. We review available economic water-valuation techniques and summarize the main types of decision problems encountered in hydroeconomic analysis. Popular solution strategies...

  1. Biorefinery Analysis

    Energy Technology Data Exchange (ETDEWEB)

    2016-06-01

    Fact sheet summarizing NREL's techno-economic analysis and life-cycle assessment capabilities to connect research with future commercial process integration, a critical step in the scale-up of biomass conversion technologies.

  2. Nonlinear analysis

    CERN Document Server

    Gasinski, Leszek

    2005-01-01

    Hausdorff Measures and Capacity. Lebesgue-Bochner and Sobolev Spaces. Nonlinear Operators and Young Measures. Smooth and Nonsmooth Analysis and Variational Principles. Critical Point Theory. Eigenvalue Problems and Maximum Principles. Fixed Point Theory.

  3. Analysis II

    CERN Document Server

    Tao, Terence

    2016-01-01

    This is part two of a two-volume book on real analysis and is intended for senior undergraduate students of mathematics who have already been exposed to calculus. The emphasis is on rigour and foundations of analysis. Beginning with the construction of the number systems and set theory, the book discusses the basics of analysis (limits, series, continuity, differentiation, Riemann integration), through to power series, several variable calculus and Fourier analysis, and then finally the Lebesgue integral. These are almost entirely set in the concrete setting of the real line and Euclidean spaces, although there is some material on abstract metric and topological spaces. The book also has appendices on mathematical logic and the decimal system. The entire text (omitting some less central topics) can be taught in two quarters of 25–30 lectures each. The course material is deeply intertwined with the exercises, as it is intended that the student actively learn the material (and practice thinking and writing ri...

  4. Analysis I

    CERN Document Server

    Tao, Terence

    2016-01-01

    This is part one of a two-volume book on real analysis and is intended for senior undergraduate students of mathematics who have already been exposed to calculus. The emphasis is on rigour and foundations of analysis. Beginning with the construction of the number systems and set theory, the book discusses the basics of analysis (limits, series, continuity, differentiation, Riemann integration), through to power series, several variable calculus and Fourier analysis, and then finally the Lebesgue integral. These are almost entirely set in the concrete setting of the real line and Euclidean spaces, although there is some material on abstract metric and topological spaces. The book also has appendices on mathematical logic and the decimal system. The entire text (omitting some less central topics) can be taught in two quarters of 25–30 lectures each. The course material is deeply intertwined with the exercises, as it is intended that the student actively learn the material (and practice thinking and writing ri...

  5. Water analysis

    International Nuclear Information System (INIS)

    Fishman, M.J.; Erdmann, D.E.

    1975-01-01

    The literature of analytical chemistry applied to water analysis is reviewed for the period Oct. 1972, through Sept. 1974. The material used in preparing the review comes mainly from major analytical journals and Chemical Abstracts. Many methods, including activation and radiometric, are discussed for the analyses of various elements, including Mo, U, Th, rare earths, and halides. Radioactivity and isotope analysis are also discussed. (663 references.) (U.S.)

  6. Link Analysis

    Science.gov (United States)

    Donoho, Steve

    Link analysis is a collection of techniques that operate on data that can be represented as nodes and links. This chapter surveys a variety of techniques including subgraph matching, finding cliques and K-plexes, maximizing spread of influence, visualization, finding hubs and authorities, and combining with traditional techniques (classification, clustering, etc). It also surveys applications including social network analysis, viral marketing, Internet search, fraud detection, and crime prevention.

  7. Ozone facilitated dechlorination of 2-chloroethanol and impact of organic solvents and activated charcoal.

    Science.gov (United States)

    Gounden, Asogan N; Jonnalagadda, Sreekanth B

    2013-10-01

    The ozone-initiated oxidation of 2-chloroethanol was followed by monitoring the consumption of the halogenated organic substrate. Gas chromatographic analysis of the ozonated products showed an increase in conversion from about 1 % after 3 h of ozone treatment to about 22 % after 12 h. The yields of major ozonated products identified and quantified namely acetaldehyde, acetic acid, and chloride ion increased proportionately as a function of ozone treatment time. The percent conversion of 2-chloroethanol in the presence of acetic acid or ethyl acetate were found to be higher than those under solvent-free conditions with similar products obtained. The use of activated charcoal during the ozonolyis of 2-chloroethanol showed a significant increase in the percent conversion of the substrate compared to solvent free ozonation. Based on the experimental findings, the overall mechanism for the reaction between 2-chloroethanol and ozone is described.

  8. Supercritical Algal Extracts: A Source of Biologically Active Compounds from Nature

    Directory of Open Access Journals (Sweden)

    Izabela Michalak

    2015-01-01

    Full Text Available The paper discusses the potential applicability of the process of supercritical fluid extraction (SFE in the production of algal extracts with the consideration of the process conditions and yields. State of the art in the research on solvent-free isolation of biologically active compounds from the biomass of algae was presented. Various aspects related with the properties of useful compounds found in cells of microalgae and macroalgae were discussed, including their potential applications as the natural components of plant protection products (biostimulants and bioregulators, dietary feed and food supplements, and pharmaceuticals. Analytical methods of determination of the natural compounds derived from algae were discussed. Algal extracts produced by SFE process enable obtaining a solvent-free concentrate of biologically active compounds; however, detailed economic analysis, as well as elaboration of products standardization procedures, is required in order to implement the products in the market.

  9. Radioactivation analysis

    International Nuclear Information System (INIS)

    1959-01-01

    Radioactivation analysis is the technique of radioactivation analysis of the constituents of a very small sample of matter by making the sample artificially radioactive. The first stage is to make the sample radioactive by artificial means, e.g. subject it to neutron bombardment. Once the sample has been activated, or made radioactive, the next task is to analyze the radiations given off by the sample. This analysis would indicate the nature and quantities of the various elements present in the sample. The reason is that the radiation from a particular radioisotope. In 1959 a symposium on 'Radioactivation Analysis' was organized in Vienna by the IAEA and the Joint Commission on Applied Radioactivity (ICSU). It was pointed out that there are certain factors creating uncertainties and elaborated how to overcome them. Attention was drawn to the fact that radioactivation analysis had proven a powerful tool tackling fundamental problems in geo- and cosmochemistry, and a review was given of the recent work in this field. Because of its extreme sensitivity radioactivation analysis had been principally employed for trace detection and its most extensive use has been in control of semiconductors and very pure metals. An account of the experience gained in the USA was given, where radioactivation analysis was being used by many investigators in various scientific fields as a practical and useful tool for elemental analyses. Much of this work had been concerned with determining sub microgramme and microgramme concentration of many different elements in samples of biological materials, drugs, fertilizers, fine chemicals, foods, fuels, glass, ceramic materials, metals, minerals, paints, petroleum products, resinous materials, soils, toxicants, water and other materials. In addition to these studies, radioactivation analysis had been used by other investigators to determine isotopic ratios of the stable isotopes of some of the elements. Another paper dealt with radioactivation

  10. Real analysis

    CERN Document Server

    Loeb, Peter A

    2016-01-01

    This textbook is designed for a year-long course in real analysis taken by beginning graduate and advanced undergraduate students in mathematics and other areas such as statistics, engineering, and economics. Written by one of the leading scholars in the field, it elegantly explores the core concepts in real analysis and introduces new, accessible methods for both students and instructors. The first half of the book develops both Lebesgue measure and, with essentially no additional work for the student, general Borel measures for the real line. Notation indicates when a result holds only for Lebesgue measure. Differentiation and absolute continuity are presented using a local maximal function, resulting in an exposition that is both simpler and more general than the traditional approach. The second half deals with general measures and functional analysis, including Hilbert spaces, Fourier series, and the Riesz representation theorem for positive linear functionals on continuous functions with compact support....

  11. Numerical analysis

    CERN Document Server

    Rao, G Shanker

    2006-01-01

    About the Book: This book provides an introduction to Numerical Analysis for the students of Mathematics and Engineering. The book is designed in accordance with the common core syllabus of Numerical Analysis of Universities of Andhra Pradesh and also the syllabus prescribed in most of the Indian Universities. Salient features: Approximate and Numerical Solutions of Algebraic and Transcendental Equation Interpolation of Functions Numerical Differentiation and Integration and Numerical Solution of Ordinary Differential Equations The last three chapters deal with Curve Fitting, Eigen Values and Eigen Vectors of a Matrix and Regression Analysis. Each chapter is supplemented with a number of worked-out examples as well as number of problems to be solved by the students. This would help in the better understanding of the subject. Contents: Errors Solution of Algebraic and Transcendental Equations Finite Differences Interpolation with Equal Intervals Interpolation with Unequal Int...

  12. Real analysis

    CERN Document Server

    DiBenedetto, Emmanuele

    2016-01-01

    The second edition of this classic textbook presents a rigorous and self-contained introduction to real analysis with the goal of providing a solid foundation for future coursework and research in applied mathematics. Written in a clear and concise style, it covers all of the necessary subjects as well as those often absent from standard introductory texts. Each chapter features a “Problems and Complements” section that includes additional material that briefly expands on certain topics within the chapter and numerous exercises for practicing the key concepts. The first eight chapters explore all of the basic topics for training in real analysis, beginning with a review of countable sets before moving on to detailed discussions of measure theory, Lebesgue integration, Banach spaces, functional analysis, and weakly differentiable functions. More topical applications are discussed in the remaining chapters, such as maximal functions, functions of bounded mean oscillation, rearrangements, potential theory, a...

  13. Numerical analysis

    CERN Document Server

    Jacques, Ian

    1987-01-01

    This book is primarily intended for undergraduates in mathematics, the physical sciences and engineering. It introduces students to most of the techniques forming the core component of courses in numerical analysis. The text is divided into eight chapters which are largely self-contained. However, with a subject as intricately woven as mathematics, there is inevitably some interdependence between them. The level of difficulty varies and, although emphasis is firmly placed on the methods themselves rather than their analysis, we have not hesitated to include theoretical material when we consider it to be sufficiently interesting. However, it should be possible to omit those parts that do seem daunting while still being able to follow the worked examples and to tackle the exercises accompanying each section. Familiarity with the basic results of analysis and linear algebra is assumed since these are normally taught in first courses on mathematical methods. For reference purposes a list of theorems used in the t...

  14. Numerical analysis

    CERN Document Server

    Scott, L Ridgway

    2011-01-01

    Computational science is fundamentally changing how technological questions are addressed. The design of aircraft, automobiles, and even racing sailboats is now done by computational simulation. The mathematical foundation of this new approach is numerical analysis, which studies algorithms for computing expressions defined with real numbers. Emphasizing the theory behind the computation, this book provides a rigorous and self-contained introduction to numerical analysis and presents the advanced mathematics that underpin industrial software, including complete details that are missing from most textbooks. Using an inquiry-based learning approach, Numerical Analysis is written in a narrative style, provides historical background, and includes many of the proofs and technical details in exercises. Students will be able to go beyond an elementary understanding of numerical simulation and develop deep insights into the foundations of the subject. They will no longer have to accept the mathematical gaps that ex...

  15. META - ANALYSIS

    Directory of Open Access Journals (Sweden)

    Ivana Ilić

    2009-04-01

    Full Text Available Meta-analysis is a statistical and analytical method which combines and synthesizes different independent studies and integrates their results into a common result. In the past few years, there has been an increasing interest in meta-analysis from both medical researches and statisticians. One of the main targets of clinical research is to obtain reliable results, although clinical trials with the same topic often give contrasting results. Medical practice is strongly influenced by the results of clinical studies if they are brought to light through important scientific journals. This large amount of information often contains scattered data, and discordant conclusions, and sometimes it is very hard to define the quality and validity of each study. Today, a large number of biomedical journals give importance to articles using meta-analysis in their researches. By using meta-analysis as a method of summarizing, integrating and analyzing a large number of independent studies on the same topic and finally pooling their results into a common result, a researcher can achieve relevant, objective and unbiased conclusions, if the procedure is well-conducted and controlled by the experts. The aim of this paper is to provide the clinical researcher with the basic principles of meta-analysis and its concepts in order to perform a valid clinical study and to report results in the correct way. In today’s evidence-based medical practice, it is crucial for anyone who wants to deal seriously with the scientific work in the biomedical field to learn mathematical and statistical principles that build meta-analysis. In that way, this statistical method could be of great importance to the researcher who wants to respond to new demands of modern medical science.

  16. Outlier analysis

    CERN Document Server

    Aggarwal, Charu C

    2013-01-01

    With the increasing advances in hardware technology for data collection, and advances in software technology (databases) for data organization, computer scientists have increasingly participated in the latest advancements of the outlier analysis field. Computer scientists, specifically, approach this field based on their practical experiences in managing large amounts of data, and with far fewer assumptions- the data can be of any type, structured or unstructured, and may be extremely large.Outlier Analysis is a comprehensive exposition, as understood by data mining experts, statisticians and

  17. Field analysis

    Directory of Open Access Journals (Sweden)

    Waindok Andrzej

    2017-12-01

    Full Text Available Field analysis including eddy currents in the magnetic core of five-phase permanent magnet tubular linear actuator (TLA has been carried out. The eddy currents induced in the magnetic core cause the losses which have been calculated. The results from 2D finite element (FE analysis have been compared with those from 3D calculations. The losses in the mover of the five-phase actuator are much lower than the losses in its stator. That is why the former ones can be neglected in the computer aided designing. The calculation results have been verified experimentally

  18. Numerical analysis

    CERN Document Server

    Brezinski, C

    2012-01-01

    Numerical analysis has witnessed many significant developments in the 20th century. This book brings together 16 papers dealing with historical developments, survey papers and papers on recent trends in selected areas of numerical analysis, such as: approximation and interpolation, solution of linear systems and eigenvalue problems, iterative methods, quadrature rules, solution of ordinary-, partial- and integral equations. The papers are reprinted from the 7-volume project of the Journal of Computational and Applied Mathematics on '/homepage/sac/cam/na2000/index.html<

  19. Clustering analysis

    International Nuclear Information System (INIS)

    Romli

    1997-01-01

    Cluster analysis is the name of group of multivariate techniques whose principal purpose is to distinguish similar entities from the characteristics they process.To study this analysis, there are several algorithms that can be used. Therefore, this topic focuses to discuss the algorithms, such as, similarity measures, and hierarchical clustering which includes single linkage, complete linkage and average linkage method. also, non-hierarchical clustering method, which is popular name K -mean method ' will be discussed. Finally, this paper will be described the advantages and disadvantages of every methods

  20. Image Analysis

    DEFF Research Database (Denmark)

    . The topics of the accepted papers range from novel applications of vision systems, pattern recognition, machine learning, feature extraction, segmentation, 3D vision, to medical and biomedical image analysis. The papers originate from all the Scandinavian countries and several other European countries......The 19th Scandinavian Conference on Image Analysis was held at the IT University of Copenhagen in Denmark during June 15-17, 2015. The SCIA conference series has been an ongoing biannual event for more than 30 years and over the years it has nurtured a world-class regional research and development...

  1. Risk analysis

    International Nuclear Information System (INIS)

    Baron, J.H.; Nunez McLeod, J.; Rivera, S.S.

    1997-01-01

    This book contains a selection of research works performed in the CEDIAC Institute (Cuyo National University) in the area of Risk Analysis, with specific orientations to the subjects of uncertainty and sensitivity studies, software reliability, severe accident modeling, etc. This volume presents important material for all those researches who want to have an insight in the risk analysis field, as a tool to solution several problems frequently found in the engineering and applied sciences field, as well as for the academic teachers who want to keep up to date, including the new developments and improvements continuously arising in this field [es

  2. Convex analysis

    CERN Document Server

    Rockafellar, Ralph Tyrell

    2015-01-01

    Available for the first time in paperback, R. Tyrrell Rockafellar's classic study presents readers with a coherent branch of nonlinear mathematical analysis that is especially suited to the study of optimization problems. Rockafellar's theory differs from classical analysis in that differentiability assumptions are replaced by convexity assumptions. The topics treated in this volume include: systems of inequalities, the minimum or maximum of a convex function over a convex set, Lagrange multipliers, minimax theorems and duality, as well as basic results about the structure of convex sets and

  3. Elementary analysis

    CERN Document Server

    Snell, K S; Langford, W J; Maxwell, E A

    1966-01-01

    Elementary Analysis, Volume 2 introduces several of the ideas of modern mathematics in a casual manner and provides the practical experience in algebraic and analytic operations that lays a sound foundation of basic skills. This book focuses on the nature of number, algebraic and logical structure, groups, rings, fields, vector spaces, matrices, sequences, limits, functions and inverse functions, complex numbers, and probability. The logical structure of analysis given through the treatment of differentiation and integration, with applications to the trigonometric and logarithmic functions, is

  4. Cluster analysis

    CERN Document Server

    Everitt, Brian S; Leese, Morven; Stahl, Daniel

    2011-01-01

    Cluster analysis comprises a range of methods for classifying multivariate data into subgroups. By organizing multivariate data into such subgroups, clustering can help reveal the characteristics of any structure or patterns present. These techniques have proven useful in a wide range of areas such as medicine, psychology, market research and bioinformatics.This fifth edition of the highly successful Cluster Analysis includes coverage of the latest developments in the field and a new chapter dealing with finite mixture models for structured data.Real life examples are used throughout to demons

  5. Relativistic analysis

    International Nuclear Information System (INIS)

    Unterberger, A.

    1987-01-01

    We study the Klein-Gordon symbolic calculus of operators acting on solutions of the free Klein-Gordon equation. It contracts to the Weyl calculus as c→∞. Mathematically, it may also be considered as a pseudodifferential analysis on the unit ball of R n [fr

  6. Analysis paralysis

    Science.gov (United States)

    Bill Block

    2012-01-01

    I have been Editor-in-Chief for about 10 months now. Over that period of time, I have processed hundreds of manuscripts and considered hundreds of reviews. In doing so, I have noticed an emphasis on analysis at the expense of a better understanding of the ecological system under study. I mention this not to belittle statistical advances made within various disciplines...

  7. IWS analysis

    International Nuclear Information System (INIS)

    Rhoades, W.A.; Dray, B.J.

    1970-01-01

    The effect of Gadolinium-155 on the prompt kinetic behavior of a zirconium hydride reactor has been deduced, using experimental data from the SNAPTRAN machine. The poison material makes the temperature coefficient more positive, and the Type IV sleeves were deduced to give a positive coefficient above 1100 0 F. A thorough discussion of the data and analysis is included. (U.S.)

  8. Analysis report

    International Nuclear Information System (INIS)

    Saadi, Radouan; Marah, Hamid

    2014-01-01

    This report presents results related to Tritium analysis carried out at the CNESTEN DASTE in Rabat (Morocco), on behalf of Senegal, within the framework of the RAF7011 project. It describes analytical method and instrumentation including general uncertainty estimation: Electrolytic enrichment and liquid scintillation counting; The results are expressed in Tritium Unit (TU); Low Limit Detection: 0.02 TU

  9. Dimensional Analysis

    Indian Academy of Sciences (India)

    to understand and quite straightforward to use. Dimensional analysis is a topic which every student of 'science encounters in elementary physics courses. The basics of this topic are taught and learnt quite hurriedly (and forgotten fairly quickly thereafter!) It does not generally receive the attention and the respect it deserves ...

  10. Survival Analysis

    CERN Document Server

    Miller, Rupert G

    2011-01-01

    A concise summary of the statistical methods used in the analysis of survival data with censoring. Emphasizes recently developed nonparametric techniques. Outlines methods in detail and illustrates them with actual data. Discusses the theory behind each method. Includes numerous worked problems and numerical exercises.

  11. Poetic Analysis

    DEFF Research Database (Denmark)

    Nielsen, Kirsten

    2010-01-01

    The first part of this article presents the characteristics of Hebrew poetry: features associated with rhythm and phonology, grammatical features, structural elements like parallelism, and imagery and intertextuality. The second part consists of an analysis of Psalm 121. It is argued that assonance...

  12. Architecture Analysis

    NARCIS (Netherlands)

    Iacob, Maria-Eugenia; Jonkers, Henk; van der Torre, Leon; de Boer, Frank S.; Bonsangue, Marcello; Stam, Andries W.; Lankhorst, Marc M.; Quartel, Dick A.C.; Aldea, Adina; Lankhorst, Marc

    2017-01-01

    This chapter also explains what the added value of enterprise architecture analysis techniques is in addition to existing, more detailed, and domain-specific ones for business processes or software, for example. Analogous to the idea of using the ArchiMate enterprise modelling language to integrate

  13. Trend analysis

    International Nuclear Information System (INIS)

    Smith, M.; Jones, D.R.

    1991-01-01

    The goal of exploration is to find reserves that will earn an adequate rate of return on the capital invested. Neither exploration nor economics is an exact science. The authors must therefore explore in those trends (plays) that have the highest probability of achieving this goal. Trend analysis is a technique for organizing the available data to make these strategic exploration decisions objectively and is in conformance with their goals and risk attitudes. Trend analysis differs from resource estimation in its purpose. It seeks to determine the probability of economic success for an exploration program, not the ultimate results of the total industry effort. Thus the recent past is assumed to be the best estimate of the exploration probabilities for the near future. This information is combined with economic forecasts. The computer software tools necessary for trend analysis are (1) Information data base - requirements and sources. (2) Data conditioning program - assignment to trends, correction of errors, and conversion into usable form. (3) Statistical processing program - calculation of probability of success and discovery size probability distribution. (4) Analytical processing - Monte Carlo simulation to develop the probability distribution of the economic return/investment ratio for a trend. Limited capital (short-run) effects are analyzed using the Gambler's Ruin concept in the Monte Carlo simulation and by a short-cut method. Multiple trend analysis is concerned with comparing and ranking trends, allocating funds among acceptable trends, and characterizing program risk by using risk profiles. In summary, trend analysis is a reality check for long-range exploration planning

  14. Complex analysis

    CERN Document Server

    Freitag, Eberhard

    2005-01-01

    The guiding principle of this presentation of ``Classical Complex Analysis'' is to proceed as quickly as possible to the central results while using a small number of notions and concepts from other fields. Thus the prerequisites for understanding this book are minimal; only elementary facts of calculus and algebra are required. The first four chapters cover the essential core of complex analysis: - differentiation in C (including elementary facts about conformal mappings) - integration in C (including complex line integrals, Cauchy's Integral Theorem, and the Integral Formulas) - sequences and series of analytic functions, (isolated) singularities, Laurent series, calculus of residues - construction of analytic functions: the gamma function, Weierstrass' Factorization Theorem, Mittag-Leffler Partial Fraction Decomposition, and -as a particular highlight- the Riemann Mapping Theorem, which characterizes the simply connected domains in C. Further topics included are: - the theory of elliptic functions based on...

  15. Wavelet analysis

    CERN Document Server

    Cheng, Lizhi; Luo, Yong; Chen, Bo

    2014-01-01

    This book could be divided into two parts i.e. fundamental wavelet transform theory and method and some important applications of wavelet transform. In the first part, as preliminary knowledge, the Fourier analysis, inner product space, the characteristics of Haar functions, and concepts of multi-resolution analysis, are introduced followed by a description on how to construct wavelet functions both multi-band and multi wavelets, and finally introduces the design of integer wavelets via lifting schemes and its application to integer transform algorithm. In the second part, many applications are discussed in the field of image and signal processing by introducing other wavelet variants such as complex wavelets, ridgelets, and curvelets. Important application examples include image compression, image denoising/restoration, image enhancement, digital watermarking, numerical solution of partial differential equations, and solving ill-conditioned Toeplitz system. The book is intended for senior undergraduate stude...

  16. Harmonic analysis

    CERN Document Server

    Helson, Henry

    2010-01-01

    This second edition has been enlarged and considerably rewritten. Among the new topics are infinite product spaces with applications to probability, disintegration of measures on product spaces, positive definite functions on the line, and additional information about Weyl's theorems on equidistribution. Topics that have continued from the first edition include Minkowski's theorem, measures with bounded powers, idempotent measures, spectral sets of bounded functions and a theorem of Szego, and the Wiener Tauberian theorem. Readers of the book should have studied the Lebesgue integral, the elementary theory of analytic and harmonic functions, and the basic theory of Banach spaces. The treatment is classical and as simple as possible. This is an instructional book, not a treatise. Mathematics students interested in analysis will find here what they need to know about Fourier analysis. Physicists and others can use the book as a reference for more advanced topics.

  17. Geometric analysis

    CERN Document Server

    Bray, Hubert L; Mazzeo, Rafe; Sesum, Natasa

    2015-01-01

    This volume includes expanded versions of the lectures delivered in the Graduate Minicourse portion of the 2013 Park City Mathematics Institute session on Geometric Analysis. The papers give excellent high-level introductions, suitable for graduate students wishing to enter the field and experienced researchers alike, to a range of the most important areas of geometric analysis. These include: the general issue of geometric evolution, with more detailed lectures on Ricci flow and Kähler-Ricci flow, new progress on the analytic aspects of the Willmore equation as well as an introduction to the recent proof of the Willmore conjecture and new directions in min-max theory for geometric variational problems, the current state of the art regarding minimal surfaces in R^3, the role of critical metrics in Riemannian geometry, and the modern perspective on the study of eigenfunctions and eigenvalues for Laplace-Beltrami operators.

  18. [OSTEOMETRIC ANALYSIS].

    Science.gov (United States)

    Tartaglia, Gianna; Nava, Alessia

    2015-01-01

    In the paleobiological studies, the osteometry is a method for gaining insight into human populations of the past. The analysis of the data obtained from measurements of the skeleton can be applied in the determination of sex and degree of sexual dimorphism intra and interpopulation. The results obtained from osteometrical data of postcranial allow us to formulate hypotheses on certain aspects related to the living conditions of the people who lived in the urban and suburban area of ancient Rome.

  19. Survival analysis

    International Nuclear Information System (INIS)

    Badwe, R.A.

    1999-01-01

    The primary endpoint in the majority of the studies has been either disease recurrence or death. This kind of analysis requires a special method since all patients in the study experience the endpoint. The standard method for estimating such survival distribution is Kaplan Meier method. The survival function is defined as the proportion of individuals who survive beyond certain time. Multi-variate comparison for survival has been carried out with Cox's proportional hazard model

  20. Water analysis

    International Nuclear Information System (INIS)

    Garbarino, J.R.; Steinheimer, T.R.; Taylor, H.E.

    1985-01-01

    This is the twenty-first biennial review of the inorganic and organic analytical chemistry of water. The format of this review differs somewhat from previous reviews in this series - the most recent of which appeared in Analytical Chemistry in April 1983. Changes in format have occurred in the presentation of material concerning review articles and the inorganic analysis of water sections. Organic analysis of water sections are organized as in previous reviews. Review articles have been compiled and tabulated in an Appendix with respect to subject, title, author(s), citation, and number of references cited. The inorganic water analysis sections are now grouped by constituent using the periodic chart; for example, alkali, alkaline earth, 1st series transition metals, etc. Within these groupings the references are roughly grouped by instrumental technique; for example, spectrophotometry, atomic absorption spectrometry, etc. Multiconstituent methods for determining analytes that cannot be grouped in this manner are compiled into a separate section sorted by instrumental technique. References used in preparing this review were compiled from nearly 60 major journals published during the period from October 1982 through September 1984. Conference proceedings, most foreign journals, most trade journals, and most government publications are excluded. References cited were obtained using the American Chemical Society's Chemical Abstracts for sections on inorganic analytical chemistry, organic analytical chemistry, water, and sewage waste. Cross-references of these sections were also included. 860 references

  1. Economic analysis

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-06-01

    The Energy Policy and Conservation Act (EPCA) mandated that minimum energy efficiency standards be established for classes of refrigerators and refrigerator-freezers, freezers, clothes dryers, water heaters, room air conditioners, home heating equipment, kitchen ranges and ovens, central air conditioners, and furnaces. EPCA requires that standards be designed to achieve the maximum improvement in energy efficiency that is technologically feasible and economically justified. Following the introductory chapter, Chapter Two describes the methodology used in the economic analysis and its relationship to legislative criteria for consumer product efficiency assessment; details how the CPES Value Model systematically compared and evaluated the economic impacts of regulation on the consumer, manufacturer and Nation. Chapter Three briefly displays the results of the analysis and lists the proposed performance standards by product class. Chapter Four describes the reasons for developing a baseline forecast, characterizes the baseline scenario from which regulatory impacts were calculated and summarizes the primary models, data sources and assumptions used in the baseline formulations. Chapter Five summarizes the methodology used to calculate regulatory impacts; describes the impacts of energy performance standards relative to the baseline discussed in Chapter Four. Also discussed are regional standards and other program alternatives to performance standards. Chapter Six describes the procedure for balancing consumer, manufacturer, and national impacts to select standard levels. Details of models and data bases used in the analysis are included in Appendices A through K.

  2. Activation analysis

    International Nuclear Information System (INIS)

    Beeck, J. OP de

    1977-01-01

    It is shown that activation analysis is especially suited to serve as a basis for determining the chemical similarity between samples defined by their trace-element concentration patterns. The general problem of classification and identification is discussed. The nature of possible classification structures and their appropriate clustering strategies is considered. A practical computer method is suggested and its application as well as the graphical representation of classification results are given. The possibility for classification using information theory is mentioned. Classification of chemical elements is discussed and practically realized after Hadamard transformation of the concentration variation patterns in a series of samples. (Sz.N.Z.)

  3. Exergy analysis

    DEFF Research Database (Denmark)

    Dovjak, M.; Simone, Angela; Kolarik, Jakub

    2011-01-01

    Exergy analysis enables us to make connections among processes inside the human body and processes in a building. So far, only the effect of different combinations of air temperatures and mean radiant temperatures have been studied, with constant relative humidity in experimental conditions...... al. (1998). The effect of different levels of RH, Ta and effective clothing insulation on human body exergy balance chain, changes in human body exergy consumption rate (hbExCr) and predicted mean vote (PMV) index were analyzed. The results show that thermal comfort conditions do not always results...

  4. Complex Analysis

    CERN Document Server

    Stein, Elias M

    2009-01-01

    With this second volume, we enter the intriguing world of complex analysis. From the first theorems on, the elegance and sweep of the results is evident. The starting point is the simple idea of extending a function initially given for real values of the argument to one that is defined when the argument is complex. From there, one proceeds to the main properties of holomorphic functions, whose proofs are generally short and quite illuminating: the Cauchy theorems, residues, analytic continuation, the argument principle.With this background, the reader is ready to learn a wealth of additional m

  5. Vector analysis

    CERN Document Server

    Newell, Homer E

    2006-01-01

    When employed with skill and understanding, vector analysis can be a practical and powerful tool. This text develops the algebra and calculus of vectors in a manner useful to physicists and engineers. Numerous exercises (with answers) not only provide practice in manipulation but also help establish students' physical and geometric intuition in regard to vectors and vector concepts.Part I, the basic portion of the text, consists of a thorough treatment of vector algebra and the vector calculus. Part II presents the illustrative matter, demonstrating applications to kinematics, mechanics, and e

  6. Sequential analysis

    CERN Document Server

    Wald, Abraham

    2013-01-01

    In 1943, while in charge of Columbia University's Statistical Research Group, Abraham Wald devised Sequential Design, an innovative statistical inference system. Because the decision to terminate an experiment is not predetermined, sequential analysis can arrive at a decision much sooner and with substantially fewer observations than equally reliable test procedures based on a predetermined number of observations. The system's immense value was immediately recognized, and its use was restricted to wartime research and procedures. In 1945, it was released to the public and has since revolutio

  7. Vector analysis

    CERN Document Server

    Brand, Louis

    2006-01-01

    The use of vectors not only simplifies treatments of differential geometry, mechanics, hydrodynamics, and electrodynamics, but also makes mathematical and physical concepts more tangible and easy to grasp. This text for undergraduates was designed as a short introductory course to give students the tools of vector algebra and calculus, as well as a brief glimpse into these subjects' manifold applications. The applications are developed to the extent that the uses of the potential function, both scalar and vector, are fully illustrated. Moreover, the basic postulates of vector analysis are brou

  8. Understanding analysis

    CERN Document Server

    Abbott, Stephen

    2015-01-01

    This lively introductory text exposes the student to the rewards of a rigorous study of functions of a real variable. In each chapter, informal discussions of questions that give analysis its inherent fascination are followed by precise, but not overly formal, developments of the techniques needed to make sense of them. By focusing on the unifying themes of approximation and the resolution of paradoxes that arise in the transition from the finite to the infinite, the text turns what could be a daunting cascade of definitions and theorems into a coherent and engaging progression of ideas. Acutely aware of the need for rigor, the student is much better prepared to understand what constitutes a proper mathematical proof and how to write one. Fifteen years of classroom experience with the first edition of Understanding Analysis have solidified and refined the central narrative of the second edition. Roughly 150 new exercises join a selection of the best exercises from the first edition, and three more project-sty...

  9. Failure Analysis

    International Nuclear Information System (INIS)

    Iorio, A.F.; Crespi, J.C.

    1987-01-01

    After ten years of operation at the Atucha I Nuclear Power Station a gear belonging to a pressurized heavy water reactor refuelling machine, failed. The gear box was used to operate the inlet-outlet heavy-water valve of the machine. Visual examination of the gear device showed an absence of lubricant and that several gear teeth were broken at the root. Motion was transmitted with a speed-reducing device with controlled adjustable times in order to produce a proper fitness of the valve closure. The aim of this paper is to discuss the results of the gear failure analysis in order to recommend the proper solution to prevent further failures. (Author)

  10. Matrix analysis

    CERN Document Server

    Bhatia, Rajendra

    1997-01-01

    A good part of matrix theory is functional analytic in spirit. This statement can be turned around. There are many problems in operator theory, where most of the complexities and subtleties are present in the finite-dimensional case. My purpose in writing this book is to present a systematic treatment of methods that are useful in the study of such problems. This book is intended for use as a text for upper division and gradu­ ate courses. Courses based on parts of the material have been given by me at the Indian Statistical Institute and at the University of Toronto (in collaboration with Chandler Davis). The book should also be useful as a reference for research workers in linear algebra, operator theory, mathe­ matical physics and numerical analysis. A possible subtitle of this book could be Matrix Inequalities. A reader who works through the book should expect to become proficient in the art of deriving such inequalities. Other authors have compared this art to that of cutting diamonds. One first has to...

  11. Functional analysis

    CERN Document Server

    Kesavan, S

    2009-01-01

    The material presented in this book is suited for a first course in Functional Analysis which can be followed by Masters students. While covering all the standard material expected of such a course, efforts have been made to illustrate the use of various theorems via examples taken from differential equations and the calculus of variations, either through brief sections or through exercises. In fact, this book will be particularly useful for students who would like to pursue a research career in the applications of mathematics. The book includes a chapter on weak and weak topologies and their applications to the notions of reflexivity, separability and uniform convexity. The chapter on the Lebesgue spaces also presents the theory of one of the simplest classes of Sobolev spaces. The book includes a chapter on compact operators and the spectral theory for compact self-adjoint operators on a Hilbert space. Each chapter has large collection of exercises at the end. These illustrate the results of the text, show ...

  12. Uncertainty analysis

    International Nuclear Information System (INIS)

    Thomas, R.E.

    1982-03-01

    An evaluation is made of the suitability of analytical and statistical sampling methods for making uncertainty analyses. The adjoint method is found to be well-suited for obtaining sensitivity coefficients for computer programs involving large numbers of equations and input parameters. For this purpose the Latin Hypercube Sampling method is found to be inferior to conventional experimental designs. The Latin hypercube method can be used to estimate output probability density functions, but requires supplementary rank transformations followed by stepwise regression to obtain uncertainty information on individual input parameters. A simple Cork and Bottle problem is used to illustrate the efficiency of the adjoint method relative to certain statistical sampling methods. For linear models of the form Ax=b it is shown that a complete adjoint sensitivity analysis can be made without formulating and solving the adjoint problem. This can be done either by using a special type of statistical sampling or by reformulating the primal problem and using suitable linear programming software

  13. Uncertainty analysis

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, R.E.

    1982-03-01

    An evaluation is made of the suitability of analytical and statistical sampling methods for making uncertainty analyses. The adjoint method is found to be well-suited for obtaining sensitivity coefficients for computer programs involving large numbers of equations and input parameters. For this purpose the Latin Hypercube Sampling method is found to be inferior to conventional experimental designs. The Latin hypercube method can be used to estimate output probability density functions, but requires supplementary rank transformations followed by stepwise regression to obtain uncertainty information on individual input parameters. A simple Cork and Bottle problem is used to illustrate the efficiency of the adjoint method relative to certain statistical sampling methods. For linear models of the form Ax=b it is shown that a complete adjoint sensitivity analysis can be made without formulating and solving the adjoint problem. This can be done either by using a special type of statistical sampling or by reformulating the primal problem and using suitable linear programming software.

  14. [Analysis of volatile components in Qingshanlvshui tea using solid-phase microextraction/accelerated solvent extraction-gas chromatography-mass spectrometry].

    Science.gov (United States)

    Zhan, Jiafen; Lu, Sheming; Meng, Zhaoyu; Xiang, Nengjun; Cao, Qiu'e; Miao, Mingming

    2008-05-01

    The volatile components of Qingshanlvshui Tea were extracted using solid phase micro-extraction (SPME) and accelerated solvent extraction (ASE), and then were identified by gas chromatography-mass spectrometry (GC-MS). It showed that ninety-one compounds were identified, including forty-nine by SPME, fifty-six by ASE, and fourteen by both of them. The main constituents were beta-myrcene, 3,5,5-trimethyl-1,5-heptadiene, L-limonene, alpha-ocimene, beta-ocimene, beta-pinene, 2-methylbenzaldehyde, 5-(hydroxymethyl)-2-furfural. Both SPME and ASE have their advantages. SPME is excellent at simplicity, rapidity, solvent-free, high enrichment, low detection limit, environment friendly etc. ASE has characteristics of time and solvent saving, automation, simplicity, as well as high efficiency.

  15. Use of headspace solid-phase microextraction coupled to liquid chromatography for the analysis of polycyclic aromatic hydrocarbons in tea infusions.

    Science.gov (United States)

    Viñas, Pilar; Campillo, Natalia; Aguinaga, Nerea; Pérez-Cánovas, Eva; Hernández-Córdoba, Manuel

    2007-09-14

    A sensitive and solvent-free procedure for the determination of 11 polycyclic aromatic hydrocarbons in tea infusions using headspace solid-phase microextraction coupled to liquid chromatography with fluorimetric detection is described. A medium polarity polydimethylsiloxane-divinylbenzene 60 microm fiber was found to be suitable for extraction at 90 degrees C and with an extraction time of 60 min under continuous stirring. Desorption was carried out using the static mode for 5 min. Under the optimized conditions, when 1.75 g of tea sample were extracted with boiling water, the precision ranged from 4 to 16% (RSD) and detection limits were between 4 and 145 ngL(-1), depending on the compound. The reliability of the procedure was corroborated by means of GC-MS. The results obtained for a standard reference material were within the range indicated by the supplier.

  16. Information security risk analysis

    CERN Document Server

    Peltier, Thomas R

    2001-01-01

    Effective Risk AnalysisQualitative Risk AnalysisValue AnalysisOther Qualitative MethodsFacilitated Risk Analysis Process (FRAP)Other Uses of Qualitative Risk AnalysisCase StudyAppendix A: QuestionnaireAppendix B: Facilitated Risk Analysis Process FormsAppendix C: Business Impact Analysis FormsAppendix D: Sample of ReportAppendix E: Threat DefinitionsAppendix F: Other Risk Analysis OpinionsIndex

  17. Pyrotechnic Shock Analysis Using Statistical Energy Analysis

    Science.gov (United States)

    2015-10-23

    2013. 3. Lyon, Richard H., and DeJong, Richard G., “ Theory and Application of Statistical Energy Analysis, 2nd Edition,” Butterworth-Heinemann, 1995... Dalton , Eric C., “Ballistic Shock Response Prediction through the Synergistic Use of Statistical Energy Analysis, Finite Element Analysis, and

  18. Safety analysis fundamentals

    International Nuclear Information System (INIS)

    Wright, A.C.D.

    2002-01-01

    This paper discusses the safety analysis fundamentals in reactor design. This study includes safety analysis done to show consequences of postulated accidents are acceptable. Safety analysis is also used to set design of special safety systems and includes design assist analysis to support conceptual design. safety analysis is necessary for licensing a reactor, to maintain an operating license, support changes in plant operations

  19. Shape analysis in medical image analysis

    CERN Document Server

    Tavares, João

    2014-01-01

    This book contains thirteen contributions from invited experts of international recognition addressing important issues in shape analysis in medical image analysis, including techniques for image segmentation, registration, modelling and classification, and applications in biology, as well as in cardiac, brain, spine, chest, lung and clinical practice. This volume treats topics such as, anatomic and functional shape representation and matching; shape-based medical image segmentation; shape registration; statistical shape analysis; shape deformation; shape-based abnormity detection; shape tracking and longitudinal shape analysis; machine learning for shape modeling and analysis; shape-based computer-aided-diagnosis; shape-based medical navigation; benchmark and validation of shape representation, analysis and modeling algorithms. This work will be of interest to researchers, students, and manufacturers in the fields of artificial intelligence, bioengineering, biomechanics, computational mechanics, computationa...

  20. Integrated Sensitivity Analysis Workflow

    Energy Technology Data Exchange (ETDEWEB)

    Friedman-Hill, Ernest J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hoffman, Edward L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Gibson, Marcus J. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Clay, Robert L. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2014-08-01

    Sensitivity analysis is a crucial element of rigorous engineering analysis, but performing such an analysis on a complex model is difficult and time consuming. The mission of the DART Workbench team at Sandia National Laboratories is to lower the barriers to adoption of advanced analysis tools through software integration. The integrated environment guides the engineer in the use of these integrated tools and greatly reduces the cycle time for engineering analysis.

  1. K Basin Hazard Analysis

    International Nuclear Information System (INIS)

    PECH, S.H.

    2000-01-01

    This report describes the methodology used in conducting the K Basins Hazard Analysis, which provides the foundation for the K Basins Final Safety Analysis Report. This hazard analysis was performed in accordance with guidance provided by DOE-STD-3009-94, Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports and implements the requirements of DOE Order 5480.23, Nuclear Safety Analysis Report

  2. K Basin Hazard Analysis

    Energy Technology Data Exchange (ETDEWEB)

    PECH, S.H.

    2000-08-23

    This report describes the methodology used in conducting the K Basins Hazard Analysis, which provides the foundation for the K Basins Final Safety Analysis Report. This hazard analysis was performed in accordance with guidance provided by DOE-STD-3009-94, Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports and implements the requirements of DOE Order 5480.23, Nuclear Safety Analysis Report.

  3. K Basins Hazard Analysis

    International Nuclear Information System (INIS)

    WEBB, R.H.

    1999-01-01

    This report describes the methodology used in conducting the K Basins Hazard Analysis, which provides the foundation for the K Basins Safety Analysis Report (HNF-SD-WM-SAR-062/Rev.4). This hazard analysis was performed in accordance with guidance provided by DOE-STD-3009-94, Preparation Guide for U. S. Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports and implements the requirements of DOE Order 5480.23, Nuclear Safety Analysis Report

  4. Qualitative Content Analysis

    OpenAIRE

    Philipp Mayring

    2000-01-01

    The article describes an approach of systematic, rule guided qualitative text analysis, which tries to preserve some methodological strengths of quantitative content analysis and widen them to a concept of qualitative procedure. First the development of content analysis is delineated and the basic principles are explained (units of analysis, step models, working with categories, validity and reliability). Then the central procedures of qualitative content analysis, inductive development of ca...

  5. Quantitative analysis chemistry

    International Nuclear Information System (INIS)

    Ko, Wansuk; Lee, Choongyoung; Jun, Kwangsik; Hwang, Taeksung

    1995-02-01

    This book is about quantitative analysis chemistry. It is divided into ten chapters, which deal with the basic conception of material with the meaning of analysis chemistry and SI units, chemical equilibrium, basic preparation for quantitative analysis, introduction of volumetric analysis, acid-base titration of outline and experiment examples, chelate titration, oxidation-reduction titration with introduction, titration curve, and diazotization titration, precipitation titration, electrometric titration and quantitative analysis.

  6. Analysis of Precision of Activation Analysis Method

    DEFF Research Database (Denmark)

    Heydorn, Kaj; Nørgaard, K.

    1973-01-01

    The precision of an activation-analysis method prescribes the estimation of the precision of a single analytical result. The adequacy of these estimates to account for the observed variation between duplicate results from the analysis of different samples and materials, is tested by the statistic T...

  7. Sentiment Analysis for Exploratory Data Analysis

    Directory of Open Access Journals (Sweden)

    Zoë Wilkinson Saldaña

    2018-01-01

    Full Text Available In this lesson you will learn to conduct 'sentiment analysis' on texts and to interpret the results. This is a form of exploratory data analysis based on natural language processing. You will learn to install all appropriate software and to build a reusable program that can be applied to your own texts.

  8. Hazard Analysis Database Report

    CERN Document Server

    Grams, W H

    2000-01-01

    The Hazard Analysis Database was developed in conjunction with the hazard analysis activities conducted in accordance with DOE-STD-3009-94, Preparation Guide for U S . Department of Energy Nonreactor Nuclear Facility Safety Analysis Reports, for HNF-SD-WM-SAR-067, Tank Farms Final Safety Analysis Report (FSAR). The FSAR is part of the approved Authorization Basis (AB) for the River Protection Project (RPP). This document describes, identifies, and defines the contents and structure of the Tank Farms FSAR Hazard Analysis Database and documents the configuration control changes made to the database. The Hazard Analysis Database contains the collection of information generated during the initial hazard evaluations and the subsequent hazard and accident analysis activities. The Hazard Analysis Database supports the preparation of Chapters 3 ,4 , and 5 of the Tank Farms FSAR and the Unreviewed Safety Question (USQ) process and consists of two major, interrelated data sets: (1) Hazard Analysis Database: Data from t...

  9. Cluster analysis for applications

    CERN Document Server

    Anderberg, Michael R

    1973-01-01

    Cluster Analysis for Applications deals with methods and various applications of cluster analysis. Topics covered range from variables and scales to measures of association among variables and among data units. Conceptual problems in cluster analysis are discussed, along with hierarchical and non-hierarchical clustering methods. The necessary elements of data analysis, statistics, cluster analysis, and computer implementation are integrated vertically to cover the complete path from raw data to a finished analysis.Comprised of 10 chapters, this book begins with an introduction to the subject o

  10. Circuit analysis for dummies

    CERN Document Server

    Santiago, John

    2013-01-01

    Circuits overloaded from electric circuit analysis? Many universities require that students pursuing a degree in electrical or computer engineering take an Electric Circuit Analysis course to determine who will ""make the cut"" and continue in the degree program. Circuit Analysis For Dummies will help these students to better understand electric circuit analysis by presenting the information in an effective and straightforward manner. Circuit Analysis For Dummies gives you clear-cut information about the topics covered in an electric circuit analysis courses to help

  11. Canonical Information Analysis

    DEFF Research Database (Denmark)

    Vestergaard, Jacob Schack; Nielsen, Allan Aasbjerg

    2015-01-01

    Canonical correlation analysis is an established multivariate statistical method in which correlation between linear combinations of multivariate sets of variables is maximized. In canonical information analysis introduced here, linear correlation as a measure of association between variables is ...

  12. Introductory numerical analysis

    CERN Document Server

    Pettofrezzo, Anthony J

    2006-01-01

    Written for undergraduates who require a familiarity with the principles behind numerical analysis, this classical treatment encompasses finite differences, least squares theory, and harmonic analysis. Over 70 examples and 280 exercises. 1967 edition.

  13. Ecosystem Analysis Program

    International Nuclear Information System (INIS)

    Burgess, R.L.

    1978-01-01

    Progress is reported on the following research programs: analysis and modeling of ecosystems; EDFB/IBP data center; biome analysis studies; land/water interaction studies; and computer programs for development of models

  14. Importance-performance analysis based SWOT analysis

    OpenAIRE

    Phadermrod, Boonyarat; Crowder, Richard M.; Wills, Gary B.

    2016-01-01

    SWOT analysis, a commonly used tool for strategic planning, is traditionally a form of brainstorming. Hence, it has been criticised that it is likely to hold subjective views of the individuals who participate in a brainstorming session and that SWOT factors are not prioritized by their significance thus it may result in an improper strategic action. While most studies of SWOT analysis have only focused on solving these shortcomings separately, this study offers an approach to diminish both s...

  15. Atualizando a química orgânica experimental da licenciatura

    Directory of Open Access Journals (Sweden)

    Navarro Marcelo

    2005-01-01

    Full Text Available The present contribution describes three different modern experiments for possible adoption in undergraduate organic chemistry laboratories. These are: 1. electrocatalytic hydrogenation of benzaldehyde to benzyl alcohol; 2. identification of three volatile components, obtained from pineapple fruit, by mass spectrometry and 3. microwave mediated fast synthesis of N-(p-chlorophenylphthalamic acid from phthalic anhydride and p-chloroaniline under solvent-free conditions. The experiments can be executed in a short period of time, putting the undergraduate student in contact with a variety of topics in organic chemistry and several techniques of analysis, showing multidisciplinarity in organic chemistry.

  16. Quantitative Determination of Caffeine in Beverages Using a Combined SPME-GC/MS Method

    Science.gov (United States)

    Pawliszyn, Janusz; Yang, Min J.; Orton, Maureen L.

    1997-09-01

    Solid-phase microextraction (SPME) combined with gas chromatography/mass spectrometry (GC/MS) has been applied to the analysis of various caffeinated beverages. Unlike the current methods, this technique is solvent free and requires no pH adjustments. The simplicity of the SPME-GC/MS method lends itself to a good undergraduate laboratory practice. This publication describes the analytical conditions and presents the data for determination of caffeine in coffee, tea, and coke. Quantitation by isotopic dilution is also illustrated.

  17. N-Methyl-N-styrylcinnamamide (lansamide from Clausena lansium in Vietnam

    Directory of Open Access Journals (Sweden)

    Peter Luger

    2009-04-01

    Full Text Available The title compound, C18H17NO, was isolated from the seeds of Clausena lansium (wampee (Rutaceae. The X-ray crystal structure analysis confirmed its chemical identity and revealed that it is solvent-free, in contrast to the previously reported monohydrate [Huang, Ou & Tang (2006. Acta Cryst. E62, o1987–o1988]. The molecular structures are practically identical but the molecules pack differently. In contrast to the monohydrate in which the water molecule generates two hydrogen bonds, no such intermolecular contacts are present in the title compound. The dihedral angle between the cinnamamide and the styryl group is 53.1 (1°.

  18. An efficient synthesis and spectroscopic characterization of Schiff bases containing 9,10-anthracenedione moiety

    Directory of Open Access Journals (Sweden)

    Fareed Ghulam

    2013-01-01

    Full Text Available A new method has been developed for the synthesis of novel Schiff bases containg anthraquinone moiety using dodeca-Tungstosilicic acid/P2O5 under solvent free conditions at room temperature. The reaction was completed in 1-3 minutes with excellent yields. This method was found to be more efficient, easy and hazardous free for the synthesis of azomethines. The development of these type of methadologies in synthetic chemistry may contribute to green chemistry. The structures of synthesized novel Schiff bases was elucidated using 1H-NMR, 13C-NMR, LCMS, FTIR and CHN analysis.

  19. Computational movement analysis

    CERN Document Server

    Laube, Patrick

    2014-01-01

    This SpringerBrief discusses the characteristics of spatiotemporal movement data, including uncertainty and scale. It investigates three core aspects of Computational Movement Analysis: Conceptual modeling of movement and movement spaces, spatiotemporal analysis methods aiming at a better understanding of movement processes (with a focus on data mining for movement patterns), and using decentralized spatial computing methods in movement analysis. The author presents Computational Movement Analysis as an interdisciplinary umbrella for analyzing movement processes with methods from a range of fi

  20. Regression analysis by example

    CERN Document Server

    Chatterjee, Samprit

    2012-01-01

    Praise for the Fourth Edition: ""This book is . . . an excellent source of examples for regression analysis. It has been and still is readily readable and understandable."" -Journal of the American Statistical Association Regression analysis is a conceptually simple method for investigating relationships among variables. Carrying out a successful application of regression analysis, however, requires a balance of theoretical results, empirical rules, and subjective judgment. Regression Analysis by Example, Fifth Edition has been expanded

  1. Applied longitudinal analysis

    CERN Document Server

    Fitzmaurice, Garrett M; Ware, James H

    2012-01-01

    Praise for the First Edition "". . . [this book] should be on the shelf of everyone interested in . . . longitudinal data analysis.""-Journal of the American Statistical Association   Features newly developed topics and applications of the analysis of longitudinal data Applied Longitudinal Analysis, Second Edition presents modern methods for analyzing data from longitudinal studies and now features the latest state-of-the-art techniques. The book emphasizes practical, rather than theoretical, aspects of methods for the analysis of diverse types of lo

  2. Discourse analysis and Foucault's

    Directory of Open Access Journals (Sweden)

    Jansen I.

    2008-01-01

    Full Text Available Discourse analysis is a method with up to now was less recognized in nursing science, althoughmore recently nursing scientists are discovering it for their purposes. However, several authors have criticized thatdiscourse analysis is often misinterpreted because of a lack of understanding of its theoretical backgrounds. In thisarticle, I reconstruct Foucault’s writings in his “Archaeology of Knowledge” to provide a theoretical base for futurearchaeological discourse analysis, which can be categorized as a socio-linguistic discourse analysis.

  3. Nonstandard Analysis and Constructivism!

    OpenAIRE

    Sanders, Sam

    2017-01-01

    Almost two decades ago, Wattenberg published a paper with the title 'Nonstandard Analysis and Constructivism?' in which he speculates on a possible connection between Nonstandard Analysis and constructive mathematics. We study Wattenberg's work in light of recent research on the aforementioned connection. On one hand, with only slight modification, some of Wattenberg's theorems in Nonstandard Analysis are seen to yield effective and constructive theorems (not involving Nonstandard Analysis). ...

  4. Analysis of extreme events

    CSIR Research Space (South Africa)

    Khuluse, S

    2009-04-01

    Full Text Available the stability of the parameter estimates. 9 / 27 Background Overview of the Theory of Extremes Case Studies Concluding Remarks Analysis of Extreme Rainfall Events Analysis of Extreme Wave Heights Figure: Map of South Africa with the study areas... highlighted 10 / 27 Background Overview of the Theory of Extremes Case Studies Concluding Remarks Analysis of Extreme Rainfall Events Analysis of Extreme Wave Heights Western Cape Climatologically diverse: Influence of the varied topography and it’s...

  5. Biological sequence analysis

    DEFF Research Database (Denmark)

    Durbin, Richard; Eddy, Sean; Krogh, Anders Stærmose

    This book provides an up-to-date and tutorial-level overview of sequence analysis methods, with particular emphasis on probabilistic modelling. Discussed methods include pairwise alignment, hidden Markov models, multiple alignment, profile searches, RNA secondary structure analysis, and phylogene......This book provides an up-to-date and tutorial-level overview of sequence analysis methods, with particular emphasis on probabilistic modelling. Discussed methods include pairwise alignment, hidden Markov models, multiple alignment, profile searches, RNA secondary structure analysis...

  6. Principal component analysis

    NARCIS (Netherlands)

    Bro, R.; Smilde, A.K.

    2014-01-01

    Principal component analysis is one of the most important and powerful methods in chemometrics as well as in a wealth of other areas. This paper provides a description of how to understand, use, and interpret principal component analysis. The paper focuses on the use of principal component analysis

  7. Charged particle activation analysis

    International Nuclear Information System (INIS)

    Peisach, M.

    1977-01-01

    The techniques of prompt and delayed activation analysis are outlined. Methods using cyclotron beams are suitable for delayed A.A., but prompt methods with relatively low energy beams serve a useful purpose for analysis of thin layers and surfaces. Multi-element analyses with prompt X-rays, generally applicable analysis by backscattering and specific analyses by nuclaer reactions are described [af

  8. Critical Classroom Discourse Analysis.

    Science.gov (United States)

    Kumaravadivelu, B.

    1999-01-01

    Conceptualizes a framework for conducting critical classroom-discourse analysis. Critiques the scope and method of current models of classroom-interaction analysis and classroom-discourse analysis and advocates using poststructuralist and postcolonialist understandings of discourse to develop a critical framework for understanding what actually…

  9. Practical data analysis

    CERN Document Server

    Cuesta, Hector

    2013-01-01

    Each chapter of the book quickly introduces a key 'theme' of Data Analysis, before immersing you in the practical aspects of each theme. You'll learn quickly how to perform all aspects of Data Analysis.Practical Data Analysis is a book ideal for home and small business users who want to slice & dice the data they have on hand with minimum hassle.

  10. Data analysis for chemistry

    CERN Document Server

    Hibbert, DBrynn

    2005-01-01

    Based on D Brynn Hibbert''s lectures on data analysis to undergraduates and graduate students, this book covers topics including measurements, means and confidence intervals, hypothesis testing, analysis of variance, and calibration models. It is meant as an entry level book targeted at learning and teaching undergraduate data analysis.

  11. Bayesian Mediation Analysis

    Science.gov (United States)

    Yuan, Ying; MacKinnon, David P.

    2009-01-01

    In this article, we propose Bayesian analysis of mediation effects. Compared with conventional frequentist mediation analysis, the Bayesian approach has several advantages. First, it allows researchers to incorporate prior information into the mediation analysis, thus potentially improving the efficiency of estimates. Second, under the Bayesian…

  12. Strategic Analysis Overview

    Science.gov (United States)

    Cirillo, William M.; Earle, Kevin D.; Goodliff, Kandyce E.; Reeves, J. D.; Stromgren, Chel; Andraschko, Mark R.; Merrill, R. Gabe

    2008-01-01

    NASA s Constellation Program employs a strategic analysis methodology in providing an integrated analysis capability of Lunar exploration scenarios and to support strategic decision-making regarding those scenarios. The strategic analysis methodology integrates the assessment of the major contributors to strategic objective satisfaction performance, affordability, and risk and captures the linkages and feedbacks between all three components. Strategic analysis supports strategic decision making by senior management through comparable analysis of alternative strategies, provision of a consistent set of high level value metrics, and the enabling of cost-benefit analysis. The tools developed to implement the strategic analysis methodology are not element design and sizing tools. Rather, these models evaluate strategic performance using predefined elements, imported into a library from expert-driven design/sizing tools or expert analysis. Specific components of the strategic analysis tool set include scenario definition, requirements generation, mission manifesting, scenario lifecycle costing, crew time analysis, objective satisfaction benefit, risk analysis, and probabilistic evaluation. Results from all components of strategic analysis are evaluated a set of pre-defined figures of merit (FOMs). These FOMs capture the high-level strategic characteristics of all scenarios and facilitate direct comparison of options. The strategic analysis methodology that is described in this paper has previously been applied to the Space Shuttle and International Space Station Programs and is now being used to support the development of the baseline Constellation Program lunar architecture. This paper will present an overview of the strategic analysis methodology and will present sample results from the application of the strategic analysis methodology to the Constellation Program lunar architecture.

  13. Foundations of mathematical analysis

    CERN Document Server

    Johnsonbaugh, Richard

    2010-01-01

    This classroom-tested volume offers a definitive look at modern analysis, with views of applications to statistics, numerical analysis, Fourier series, differential equations, mathematical analysis, and functional analysis. Upper-level undergraduate students with a background in calculus will benefit from its teachings, along with beginning graduate students seeking a firm grounding in modern analysis. A self-contained text, it presents the necessary background on the limit concept, and the first seven chapters could constitute a one-semester introduction to limits. Subsequent chapters discuss

  14. Multivariate analysis with LISREL

    CERN Document Server

    Jöreskog, Karl G; Y Wallentin, Fan

    2016-01-01

    This book traces the theory and methodology of multivariate statistical analysis and shows how it can be conducted in practice using the LISREL computer program. It presents not only the typical uses of LISREL, such as confirmatory factor analysis and structural equation models, but also several other multivariate analysis topics, including regression (univariate, multivariate, censored, logistic, and probit), generalized linear models, multilevel analysis, and principal component analysis. It provides numerous examples from several disciplines and discusses and interprets the results, illustrated with sections of output from the LISREL program, in the context of the example. The book is intended for masters and PhD students and researchers in the social, behavioral, economic and many other sciences who require a basic understanding of multivariate statistical theory and methods for their analysis of multivariate data. It can also be used as a textbook on various topics of multivariate statistical analysis.

  15. http Log Analysis

    DEFF Research Database (Denmark)

    Bøving, Kristian Billeskov; Simonsen, Jesper

    2004-01-01

    This article documents how log analysis can inform qualitative studies concerning the usage of web-based information systems (WIS). No prior research has used http log files as data to study collaboration between multiple users in organisational settings. We investigate how to perform http log...... analysis; what http log analysis says about the nature of collaborative WIS use; and how results from http log analysis may support other data collection methods such as surveys, interviews, and observation. The analysis of log files initially lends itself to research designs, which serve to test...... hypotheses using a quantitative methodology. We show that http log analysis can also be valuable in qualitative research such as case studies. The results from http log analysis can be triangulated with other data sources and for example serve as a means of supporting the interpretation of interview data...

  16. The ATLAS Analysis Model

    CERN Multimedia

    Amir Farbin

    The ATLAS Analysis Model is a continually developing vision of how to reconcile physics analysis requirements with the ATLAS offline software and computing model constraints. In the past year this vision has influenced the evolution of the ATLAS Event Data Model, the Athena software framework, and physics analysis tools. These developments, along with the October Analysis Model Workshop and the planning for CSC analyses have led to a rapid refinement of the ATLAS Analysis Model in the past few months. This article introduces some of the relevant issues and presents the current vision of the future ATLAS Analysis Model. Event Data Model The ATLAS Event Data Model (EDM) consists of several levels of details, each targeted for a specific set of tasks. For example the Event Summary Data (ESD) stores calorimeter cells and tracking system hits thereby permitting many calibration and alignment tasks, but will be only accessible at particular computing sites with potentially large latency. In contrast, the Analysis...

  17. Social Set Analysis

    DEFF Research Database (Denmark)

    Vatrapu, Ravi; Mukkamala, Raghava Rao; Hussain, Abid

    2016-01-01

    Current analytical approaches in computational social science can be characterized by four dominant paradigms: text analysis (information extraction and classification), social network analysis (graph theory), social complexity analysis (complex systems science), and social simulations (cellular...... this limitation, based on the sociology of associations and the mathematics of set theory, this paper presents a new approach to big data analytics called social set analysis. Social set analysis consists of a generative framework for the philosophies of computational social science, theory of social data...... analysis, crisp set-theoretical interaction analysis, and event-studies-oriented set-theoretical visualizations. Implications for big data analytics, current limitations of the set-theoretical approach, and future directions are outlined....

  18. Cost benefit analysis cost effectiveness analysis

    International Nuclear Information System (INIS)

    Lombard, J.

    1986-09-01

    The comparison of various protection options in order to determine which is the best compromise between cost of protection and residual risk is the purpose of the ALARA procedure. The use of decision-aiding techniques is valuable as an aid to selection procedures. The purpose of this study is to introduce two rather simple and well known decision aiding techniques: the cost-effectiveness analysis and the cost-benefit analysis. These two techniques are relevant for the great part of ALARA decisions which need the use of a quantitative technique. The study is based on an hypothetical case of 10 protection options. Four methods are applied to the data

  19. NASA trend analysis procedures

    Science.gov (United States)

    1993-01-01

    This publication is primarily intended for use by NASA personnel engaged in managing or implementing trend analysis programs. 'Trend analysis' refers to the observation of current activity in the context of the past in order to infer the expected level of future activity. NASA trend analysis was divided into 5 categories: problem, performance, supportability, programmatic, and reliability. Problem trend analysis uncovers multiple occurrences of historical hardware or software problems or failures in order to focus future corrective action. Performance trend analysis observes changing levels of real-time or historical flight vehicle performance parameters such as temperatures, pressures, and flow rates as compared to specification or 'safe' limits. Supportability trend analysis assesses the adequacy of the spaceflight logistics system; example indicators are repair-turn-around time and parts stockage levels. Programmatic trend analysis uses quantitative indicators to evaluate the 'health' of NASA programs of all types. Finally, reliability trend analysis attempts to evaluate the growth of system reliability based on a decreasing rate of occurrence of hardware problems over time. Procedures for conducting all five types of trend analysis are provided in this publication, prepared through the joint efforts of the NASA Trend Analysis Working Group.

  20. Synthesis of some substituted pyrazole-1- carbothioamides and spectral correlations in 3-(2,4-dibromophenyl-5-(substituted phenyl-4,5-dihydro-1H-pyrazole-1- carbothioamides

    Directory of Open Access Journals (Sweden)

    G. Thirunarayanan

    2013-06-01

    Full Text Available Background: This study aims to synthesise a series of 1-thiocarbomyl pyrazolines, including 3-(2,4-dibromophenyl-5-(substituted phenyl-4,5-dihydro-1H-pyrazole-1-carbothioamides, using solvent-free fly-ash:PTS catalyzed cyclization between chalcones and thiosemicarbazide, under microwave irradiation. Then to characterize them using analytical, physical and spectroscopic data. Methods: Solvent-free microwave assisted cyclization was adopted for the synthesis of 1-thiocarbomyl, including 3-(2,4-dibromophenyl-5-(substituted phenyl-4,5-dihydro-1Hpyrazole-1-carbothioamides, using fly-ash:PTS as the catalyst. They were characterised by IR, NMR and mass spectroscopic data. The infrared (IR and nuclear magnetic resonance (NMR spectral data was correlated with substituent constants, F and R parameters, using Hammett equation, to study the effect of substituents. Results: The yields of the synthesised chalcones were more than 85%. The spectral data of these 3-(2,4-dibromophenyl-5-(substituted phenyl-4,5-dihydro-1H-pyrazole-1- carbothioamides had been correlated, using single and multi-linear regression analysis. These gave a satisfactory or fair degree of correlation with some parameters. Conclusion: Easy handling, non-hazardous and environmentally benign cyclization method had been adopted for the synthesis of 1-thiocarbomyl pyrazolines using fly-ash:PTS as catalyst, with better yields. Some of the Hammett spectral correlations were found to be satisfactory, with the observed spectroscopic data. Keywords: 3-(2,4-dibromophenyl-5-(substituted phenyl-4,5-dihydro-1H-pyrazole-1- carbothioamides, fly-ash:PTS, Solvent-free synthesis, Hammett correlations.

  1. Fundamentals of functional analysis

    CERN Document Server

    Farenick, Douglas

    2016-01-01

    This book provides a unique path for graduate or advanced undergraduate students to begin studying the rich subject of functional analysis with fewer prerequisites than is normally required. The text begins with a self-contained and highly efficient introduction to topology and measure theory, which focuses on the essential notions required for the study of functional analysis, and which are often buried within full-length overviews of the subjects. This is particularly useful for those in applied mathematics, engineering, or physics who need to have a firm grasp of functional analysis, but not necessarily some of the more abstruse aspects of topology and measure theory normally encountered. The reader is assumed to only have knowledge of basic real analysis, complex analysis, and algebra. The latter part of the text provides an outstanding treatment of Banach space theory and operator theory, covering topics not usually found together in other books on functional analysis. Written in a clear, concise manner,...

  2. Data analysis in astronomy

    International Nuclear Information System (INIS)

    Di Gesu, V.; Crane, P.; Friedman, J.H.; Levialdi, S.; Scarsi, L.

    1985-01-01

    This book presents information on the following topics: the data analysis facilities that astronomers want; time analysis in astronomy; tools for periodicity searches; graphical methods of exploratory data analysis; multivariate statistics to analyze extraterrestrial particles from the ocean floor; application of bootstrap sampling in gamma-ray astronomy; an automated method for velocity field analysis; panel discussion on data analysis trends in x-ray and gamma-ray astronomy; the Groningen image processing system; astronomical input to image processing - astronomical output from image processing; 2-D photometry; spectrometry; time dependent analysis; solar image processing with the Clark Lake Radioheliograph; steps toward parallel processing; new architectures for image processing; data structures and languages in support of parallel image processing for astronomy; and morphology and probability in image processing

  3. Computational Music Analysis

    DEFF Research Database (Denmark)

    This book provides an in-depth introduction and overview of current research in computational music analysis. Its seventeen chapters, written by leading researchers, collectively represent the diversity as well as the technical and philosophical sophistication of the work being done today...... on well-established theories in music theory and analysis, such as Forte's pitch-class set theory, Schenkerian analysis, the methods of semiotic analysis developed by Ruwet and Nattiez, and Lerdahl and Jackendoff's Generative Theory of Tonal Music. The book is divided into six parts, covering...... music analysis, the book provides an invaluable resource for researchers, teachers and students in music theory and analysis, computer science, music information retrieval and related disciplines. It also provides a state-of-the-art reference for practitioners in the music technology industry....

  4. Sparse Exploratory Factor Analysis.

    Science.gov (United States)

    Trendafilov, Nickolay T; Fontanella, Sara; Adachi, Kohei

    2017-07-13

    Sparse principal component analysis is a very active research area in the last decade. It produces component loadings with many zero entries which facilitates their interpretation and helps avoid redundant variables. The classic factor analysis is another popular dimension reduction technique which shares similar interpretation problems and could greatly benefit from sparse solutions. Unfortunately, there are very few works considering sparse versions of the classic factor analysis. Our goal is to contribute further in this direction. We revisit the most popular procedures for exploratory factor analysis, maximum likelihood and least squares. Sparse factor loadings are obtained for them by, first, adopting a special reparameterization and, second, by introducing additional [Formula: see text]-norm penalties into the standard factor analysis problems. As a result, we propose sparse versions of the major factor analysis procedures. We illustrate the developed algorithms on well-known psychometric problems. Our sparse solutions are critically compared to ones obtained by other existing methods.

  5. Analysis apparatus and method of analysis

    International Nuclear Information System (INIS)

    1976-01-01

    A continuous streaming method developed for the excution of immunoassays is described in this patent. In addition, a suitable apparatus for the method was developed whereby magnetic particles are automatically employed for the consecutive analysis of a series of liquid samples via the RIA technique

  6. Static Analysis Numerical Algorithms

    Science.gov (United States)

    2016-04-01

    STATIC ANALYSIS OF NUMERICAL ALGORITHMS KESTREL TECHNOLOGY, LLC APRIL 2016 FINAL TECHNICAL REPORT APPROVED FOR PUBLIC RELEASE; DISTRIBUTION...3. DATES COVERED (From - To) NOV 2013 – NOV 2015 4. TITLE AND SUBTITLE STATIC ANALYSIS OF NUMERICAL ALGORITHMS 5a. CONTRACT NUMBER FA8750-14-C...and Honeywell Aerospace Advanced Technology to combine model-based development of complex avionics control software with static analysis of the

  7. Emission spectrochemical analysis

    International Nuclear Information System (INIS)

    Rives, R.D.; Bruks, R.R.

    1983-01-01

    The emission spectrochemical method of analysis based on the fact that atoms of elements can be excited in the electric arc or in the laser beam and will emit radiation with characteristic wave lengths is considered. The review contains the data on spectrochemical analysis, of liquids geological materials, scheme of laser microprobe. The main characteristics of emission spectroscopy, atomic absorption spectroscopy and X-ray fluorescent analysis, are aeneralized

  8. Mastering Clojure data analysis

    CERN Document Server

    Rochester, Eric

    2014-01-01

    This book consists of a practical, example-oriented approach that aims to help you learn how to use Clojure for data analysis quickly and efficiently.This book is great for those who have experience with Clojure and who need to use it to perform data analysis. This book will also be hugely beneficial for readers with basic experience in data analysis and statistics.

  9. The ATLAS Analysis Architecture

    International Nuclear Information System (INIS)

    Cranmer, K.S.

    2008-01-01

    We present an overview of the ATLAS analysis architecture including the relevant aspects of the computing model and the major architectural aspects of the Athena framework. Emphasis will be given to the interplay between the analysis use cases and the technical aspects of the architecture including the design of the event data model, transient-persistent separation, data reduction strategies, analysis tools, and ROOT interoperability

  10. Stochastic Analysis 2010

    CERN Document Server

    Crisan, Dan

    2011-01-01

    "Stochastic Analysis" aims to provide mathematical tools to describe and model high dimensional random systems. Such tools arise in the study of Stochastic Differential Equations and Stochastic Partial Differential Equations, Infinite Dimensional Stochastic Geometry, Random Media and Interacting Particle Systems, Super-processes, Stochastic Filtering, Mathematical Finance, etc. Stochastic Analysis has emerged as a core area of late 20th century Mathematics and is currently undergoing a rapid scientific development. The special volume "Stochastic Analysis 2010" provides a sa

  11. Introduction to analysis

    CERN Document Server

    Gaughan, Edward D

    2009-01-01

    Introduction to Analysis is designed to bridge the gap between the intuitive calculus usually offered at the undergraduate level and the sophisticated analysis courses the student encounters at the graduate level. In this book the student is given the vocabulary and facts necessary for further study in analysis. The course for which it is designed is usually offered at the junior level, and it is assumed that the student has little or no previous experience with proofs in analysis. A considerable amount of time is spent motivating the theorems and proofs and developing the reader's intuition.

  12. Space Weather Analysis

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Space Weather Analysis archives are model output of ionospheric, thermospheric and magnetospheric particle populations, energies and electrodynamics

  13. Textile Technology Analysis Lab

    Data.gov (United States)

    Federal Laboratory Consortium — The Textile Analysis Labis built for evaluating and characterizing the physical properties of an array of textile materials, but specifically those used in aircrew...

  14. Risk analysis methodology survey

    Science.gov (United States)

    Batson, Robert G.

    1987-01-01

    NASA regulations require that formal risk analysis be performed on a program at each of several milestones as it moves toward full-scale development. Program risk analysis is discussed as a systems analysis approach, an iterative process (identification, assessment, management), and a collection of techniques. These techniques, which range from simple to complex network-based simulation were surveyed. A Program Risk Analysis Handbook was prepared in order to provide both analyst and manager with a guide for selection of the most appropriate technique.

  15. Thermogravimetric Analysis Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — At NETL’s Thermogravimetric Analysis Laboratory in Morgantown, WV, researchers study how chemical looping combustion (CLC) can be applied to fossil energy systems....

  16. Sensitivity and uncertainty analysis

    CERN Document Server

    Cacuci, Dan G; Navon, Ionel Michael

    2005-01-01

    As computer-assisted modeling and analysis of physical processes have continued to grow and diversify, sensitivity and uncertainty analyses have become indispensable scientific tools. Sensitivity and Uncertainty Analysis. Volume I: Theory focused on the mathematical underpinnings of two important methods for such analyses: the Adjoint Sensitivity Analysis Procedure and the Global Adjoint Sensitivity Analysis Procedure. This volume concentrates on the practical aspects of performing these analyses for large-scale systems. The applications addressed include two-phase flow problems, a radiative c

  17. International Market Analysis

    DEFF Research Database (Denmark)

    Sørensen, Olav Jull

    2009-01-01

    The review presents the book International Market Analysis: Theories and Methods, written by John Kuiada, professor at Centre of International Business, Department of Business Studies, Aalborg University. The book is refreshingly new in its way of looking at a classical problem. It looks at market...... analysis from the point of vie of ways of thinking about markets. Furthermore, the book includes the concept of learning in the analysis of markets og how the way we understand business reality influneces our choice of methodology for market analysis....

  18. Machine Fault Signature Analysis

    Directory of Open Access Journals (Sweden)

    Pratesh Jayaswal

    2008-01-01

    Full Text Available The objective of this paper is to present recent developments in the field of machine fault signature analysis with particular regard to vibration analysis. The different types of faults that can be identified from the vibration signature analysis are, for example, gear fault, rolling contact bearing fault, journal bearing fault, flexible coupling faults, and electrical machine fault. It is not the intention of the authors to attempt to provide a detailed coverage of all the faults while detailed consideration is given to the subject of the rolling element bearing fault signature analysis.

  19. Analysis of food contaminants

    National Research Council Canada - National Science Library

    Gilbert, John

    1984-01-01

    ... quantification methods used in the analysis of mycotoxins in foods - Confirmation and quantification of trace organic food contaminants by mass spectrometry-selected ion monitoring - Chemiluminescence...

  20. Geospatial Data Analysis Facility

    Data.gov (United States)

    Federal Laboratory Consortium — Geospatial application development, location-based services, spatial modeling, and spatial analysis are examples of the many research applications that this facility...