WorldWideScience

Sample records for aliivibrio salmonicida strain

  1. Aeromonas salmonicida subsp. salmonicida strains isolated from Chinese freshwater fish contain a novel genomic island and possible regional-specific mobile genetic elements profiles

    DEFF Research Database (Denmark)

    Long, Meng; Nielsen, Tue K; Leisner, Jørgen J;

    2016-01-01

    variant of the genomic island AsaGEI in BG, designated as AsaGEI2c This is the first report on a GEI of A. salmonicida strain from China. Furthermore, both YK and BG strains contained a Tn7 transposon inserted at the same position in the chromosome. Finally, IS-dependent rearrangements on pAsa5 are deemed...... likely to have occurred, with omission of the resD gene in both strains as well as omission of genes related to the IncF conjugal transfer system in the YK isolate. This study demonstrates that A. salmonicida subsp. salmonicida can infect non-salmonids (cyprinids) in addition to salmonids, and that Asa...... of which belonged to the cyprinid family, and the strains showed a difference in virulence. Subsequently, we performed whole genome sequencing of the strains, and comparison of their genomic sequences to the genome of the A449 reference strain revealed various genomic rearrangements, including a new...

  2. Optimization of a plasmid electroporation protocol for Aeromonas salmonicida subsp. salmonicida.

    Science.gov (United States)

    Dallaire-Dufresne, Stéphanie; Emond-Rheault, Jean-Guillaume; Attéré, Sabrina A; Tanaka, Katherine H; Trudel, Mélanie V; Frenette, Michel; Charette, Steve J

    2014-03-01

    Aeromonas salmonicida subsp. salmonicida is a major fish pathogen. Molecular tools are required to study the virulence and genomic stability of this bacterium. An efficient electroporation-mediated transformation protocol for A. salmonicida subsp. salmonicida would make genetic studies faster and easier. In the present study, we designed the 4.1-kb pSDD1 plasmid as a tool for optimizing an electroporation protocol for A. salmonicida subsp. salmonicida. We systematically tested the electroporation conditions to develop a protocol that generates the maximum number of transformants. Under these optimal conditions (25 kV/cm, 200 Ω, 25 μF), we achieved an electroporation efficiency of up to 1×10(5) CFU/μg DNA. The electroporation protocol was also tested using another plasmid of 10.6-kb and three different strains of A. salmonicida subsp. salmonicida. The strains displayed significant differences in their electro-transformation competencies. Strain 01-B526 was the easiest to electroporate, especially with the pSDD1 plasmid. This plasmid was stably maintained in the 01-B526 transformants, as were the native plasmids, but could be easily cured by removing the selection conditions. This is the first efficient electroporation protocol reported for A. salmonicida subsp. salmonicida, and offers new possibilities for studying this bacterium.

  3. The genome of Aeromonas salmonicida subsp. salmonicida A449: insights into the evolution of a fish pathogen

    Directory of Open Access Journals (Sweden)

    Murphy Colleen

    2008-09-01

    Full Text Available Abstract Background Aeromonas salmonicida subsp. salmonicida is a Gram-negative bacterium that is the causative agent of furunculosis, a bacterial septicaemia of salmonid fish. While other species of Aeromonas are opportunistic pathogens or are found in commensal or symbiotic relationships with animal hosts, A. salmonicida subsp. salmonicida causes disease in healthy fish. The genome sequence of A. salmonicida was determined to provide a better understanding of the virulence factors used by this pathogen to infect fish. Results The nucleotide sequences of the A. salmonicida subsp. salmonicida A449 chromosome and two large plasmids are characterized. The chromosome is 4,702,402 bp and encodes 4388 genes, while the two large plasmids are 166,749 and 155,098 bp with 178 and 164 genes, respectively. Notable features are a large inversion in the chromosome and, in one of the large plasmids, the presence of a Tn21 composite transposon containing mercury resistance genes and an In2 integron encoding genes for resistance to streptomycin/spectinomycin, quaternary ammonia compounds, sulphonamides and chloramphenicol. A large number of genes encoding potential virulence factors were identified; however, many appear to be pseudogenes since they contain insertion sequences, frameshifts or in-frame stop codons. A total of 170 pseudogenes and 88 insertion sequences (of ten different types are found in the A. salmonicida genome. Comparison with the A. hydrophila ATCC 7966T genome reveals multiple large inversions in the chromosome as well as an approximately 9% difference in gene content indicating instances of single gene or operon loss or gain. A limited number of the pseudogenes found in A. salmonicida A449 were investigated in other Aeromonas strains and species. While nearly all the pseudogenes tested are present in A. salmonicida subsp. salmonicida strains, only about 25% were found in other A. salmonicida subspecies and none were detected in other

  4. Identification, cloning and expressions of proteases from a cold adapted organism Aliivibrio salmonicida

    OpenAIRE

    Ather, Arjumand

    2009-01-01

    The work presented in this thesis provides an overview of molecular and structural biology projects and their related problems. The problems arises during these projects are common for most of the target proteins, with varying intensity of severity. The realization and identification of these problems and selection of their correct, best possible solution is an imperative step that might lead to achievement of the goals. This project has started with the survey of a cold adapted bacterial gen...

  5. Occurrence and significance of atypical Aeromonas salmonicida in non-salmonid and salmonid fish species : A review

    DEFF Research Database (Denmark)

    Wiklund, T.; Dalsgaard, Inger

    1998-01-01

    Bacterial strains of Aeromonas salmonicida included in the recognized subsp. achromogenes, subsp, masoucida, and subsp. smithia in addition to the large number of strains not included in any of the described subspecies are referred to as atypical A. salmonicida. The atypical strains form a very...... heterogeneous group with respect to biochemical characteristics, growth conditions, and production of extracellular proteases. Consequently, the present taxonomy of the species A. salmonicida is rather ambiguous. Atypical A. salmonicida has been isolated from a wide range of cultivated and wild fish species...... variation. An extracellular A-layer has been detected in different atypical strains, but virulence mechanisms different from those described for (typical) A. salmonicida subsp. salmonicida, for example an extracellular metallo-protease and a different iron utilization mechanism, have been described. Limited...

  6. The Aeromonas salmonicida Lipopolysaccharide Core from Different Subspecies: The Unusual subsp. pectinolytica.

    Science.gov (United States)

    Merino, Susana; Tomás, Juan M

    2016-01-01

    Initial hydridization tests using Aeromonas salmonicida typical and atypical strains showed the possibility of different lipopolysaccharide (LPS) outer cores among these strains. By chemical structural analysis, LPS-core SDS-PAGE gel migration, and functional and comparative genomics we demonstrated that typical A. salmonicida (subsp. salmonicida) strains and atypical subsp. masoucida and probably smithia strains showed the same LPS outer core. A. salmonicida subsp. achromogenes strains show a similar LPS outer core but lack one of the most external residues (a galactose linked α1-6 to heptose), not affecting the O-antigen LPS linkage. A. salmonicida subsp. pectinolytica strains show a rather changed LPS outer core, which is identical to the LPS outer core from the majority of the A. hydrophila strains studied by genomic analyses. The LPS inner core in all tested A. salmonicida strains, typical and atypical, is well-conserved. Furthermore, the LPS inner core seems to be conserved in all the Aeromonas (psychrophilic or mesophilic) strains studied by genomic analyses.

  7. The mosaic architecture of Aeromonas salmonicida subsp. salmonicida pAsa4 plasmid and its consequences on antibiotic resistance

    Science.gov (United States)

    Tanaka, Katherine H.; Vincent, Antony T.; Trudel, Mélanie V.; Paquet, Valérie E.; Frenette, Michel

    2016-01-01

    Aeromonas salmonicida subsp. salmonicida, the causative agent of furunculosis in salmonids, is an issue especially because many isolates of this bacterium display antibiotic resistances, which limit treatments against the disease. Recent results suggested the possible existence of alternative forms of pAsa4, a large plasmid found in A. salmonicida subsp. salmonicida and bearing multiple antibiotic resistance genes. The present study reveals the existence of two newly detected pAsa4 variants, pAsa4b and pAsa4c. We present the extensive characterization of the genomic architecture, the mobile genetic elements and the antimicrobial resistance genes of these plasmids in addition to the reference pAsa4 from the strain A449. The analysis showed differences between the three architectures with consequences on the content of resistance genes. The genomic plasticity of the three pAsa4 variants could be partially explained by the action of mobile genetic elements like insertion sequences. Eight additional isolates from Canada and Europe that bore similar antibiotic resistance patterns as pAsa4-bearing strains were genotyped and specific pAsa4 variants could be attributed to phenotypic profiles. pAsa4 and pAsa4c were found in Europe, while pAsa4b was found in Canada. In accordance with their content in conjugative transfer genes, only pAsa4b and pAsa4c can be transferred by conjugation in Escherichia coli. The plasticity of pAsa4 variants related to the acquisition of antibiotic resistance indicates that these plasmids may pose a threat in terms of the dissemination of antimicrobial-resistant A. salmonicida subsp. salmonicida bacteria. PMID:27812409

  8. Identification of atypical Aeromonas salmonicida : Inter-laboratory evaluation and harmonization of methods

    DEFF Research Database (Denmark)

    Dalsgaard, Inger; Gudmundsdottir, B.K.; Helgason, S.;

    1998-01-01

    The atypical isolates of Aeromonas salmonicida are becoming increasingly important as the frequency of isolation of bacteria belonging to this group continues to rise. The primary object of this study was to compare and evaluate the results obtained in various laboratories concerning the biochemi......The atypical isolates of Aeromonas salmonicida are becoming increasingly important as the frequency of isolation of bacteria belonging to this group continues to rise. The primary object of this study was to compare and evaluate the results obtained in various laboratories concerning the...... biochemical identification of atypical Aer. salmonicida before and after standardization of media and methods. Five laboratories examined 25 isolates of Aer. salmonicida from diverse fish species and geographical locations including the reference strains of Aer. salmonicida subsp, salmonicida (NCMB 1102) and...... reactions. After standardization, improvement was obtained with the identification; however, disagreement was still observed between the different laboratories. These findings demonstrate the difficulties involved in a proper identification of atypical Aer. salmonicida and also that data presented in the...

  9. Recovery of atypical Aeromonas salmonicida from ulcerated fish from the Baltic Sea

    DEFF Research Database (Denmark)

    Wiklund, T.; Tabolina, I; Bezgachina, T.V.

    1999-01-01

    of the ulcers of dab Limanda limanda, flounder Platichthys flesus, and turbot Scophthalmus maximus. A fast-growing strain was isolated in pure cultures from both ulcers and visceral organs of viviparous blenny Zoarces viviparus. Available data suggest that atypical A. salmonicida is generally involved...

  10. Development of a gene transfer system for curing of plasmids in the marine fish pathogen Vibrio salmonicida.

    Science.gov (United States)

    Valla, S; Frydenlund, K; Coucheron, D H; Haugan, K; Johansen, B; Jørgensen, T; Knudsen, G; Strøm, A

    1992-01-01

    All reported natural isolates of the marine fish pathogen Vibrio salmonicida contain plasmids, and in another marine fish pathogen, Vibrio anguillarum, it has been shown that a plasmid is important for expression of virulence by the organism. To study the function of the plasmids in V. salmonicida, we developed a gene transfer system based on the plasmid RSF1010 replicon. The gene transfer system was used to construct a plasmid-free strain, and this strain was found to behave similarly to the wild type in a fish pathogenicity test based on intraperitoneal injection of the bacteria. We were unable to detect any other phenotypic differences between the two strains. It could therefore be concluded that at least in the V. salmonicida strain tested, extrachromosomal DNA is not required for expression of virulence. Images PMID:1622274

  11. Resistance of Salmonds Against Aeromonas Salmonicida

    DEFF Research Database (Denmark)

    Holten-Andersen, Lars; Dalsgaard, Inger; Buchmann, Kurt

    2011-01-01

    susceptibility to this disease might exist between Baltic salmon and the widely used rainbow trout. Hence, a cohabitation challenge model was applied to investigate the relative susceptibility to infection with Aeromonas salmonicida in rainbow trout and Baltic salmon. The course of infection was monitored daily...

  12. AEROMONAS SALMONICIDA INFECTION IN VACCINATED RAINBOW TROUT

    DEFF Research Database (Denmark)

    Chettri, Jiwan Kumar; Skov, Jakob; Mohammad, Rezkar Jaafar;

    to that of the commercial vaccine with lower side effects as observed by the Speilberg scoring system. Gene expression analysis did not show a clear trend for Th1 or Th2 response in the vaccinated fish. Exposure of fish to saltwater increased the IgT production. Overall, the immune response in vaccinated fish, the side......In vivo testing of any candidate vaccine is influenced by the choice of challenge method and the external environmental conditions. In the present study, a comparative challenge study was performed to evaluate the efficacy of different vaccines against the bacterial pathogen Aeromonas salmonicida...... causing furunculosis. Rainbow trout (Oncorhynchus mykiss) were vaccinated with two trivalent adjuvanted experimental vaccines containing formalin-killed A. salmonicida, Vibrio anguillarum O1 and O2a and a commercial corresponding vaccine (Alpha Ject 3000). Fish were challenged by i.p. injection...

  13. Draft genome sequences of two Aeromonas salmonicida subsp. salmonicida isolates harboring plasmids conferring antibiotic resistance.

    Science.gov (United States)

    Vincent, Antony T; Tanaka, Katherine H; Trudel, Melanie V; Frenette, Michel; Derome, Nicolas; Charette, Steve J

    2015-02-01

    The bacterium Aeromonas salmonicida is the etiological agent of furunculosis, a widespread fish disease causing important economic losses to the fish farming industry. Antibiotic treatments in fish farms may be challenging given the existence of multidrug-resistant isolates of this bacterium. Here, we report the draft genome sequences of the 2004-05MF26 and 2009-144K3 isolates, which harbor plasmids conferring antibiotic resistance. Both isolates also carry the large plasmid pAsa5, which is known to encode a type three secretion system (TTSS) and the pAsal1 plasmid which has the aopP gene producing a TTSS effector. These two isolates are good representatives of the plasmid diversity in A. salmonicida subsp. salmonicida. PMID:25724776

  14. Characterization of atypical Aeromonas salmonicida isolates by ribotyping and plasmid profiling

    DEFF Research Database (Denmark)

    Pedersen, Karl; Dalsgaard, Inger; Larsen, J.L.

    1996-01-01

    ) and plasmid profiles. Most epidemiologically unrelated strains had different ribotypes, whereas isolates from the same outbreak were identical. All strains, except one, carried one or more large plasmids (>55 kbp) and all strains, except two, additionally carried one or more smaller plasmids. Many strains...... isolated from the same outbreak showed different plasmid profiles although some plasmids were identical. The results suggest the existence of several atypical Aer, salmonicida. It also seems that ribotypes are stable properties for these bacteria while the plasmids are more labile....

  15. Quorum sensing signals are produced by Aeromonas salmonicida and quorum sensing inhibitors can reduce production of a potential virulence factor

    DEFF Research Database (Denmark)

    Rasch, Maria; Kastbjerg, Vicky Gaedt; Bruhn, Jesper Bartholin;

    2007-01-01

    . Pigment production was only observed in broth under highly aerated conditions. Quorum sensing inhibitors (QSIs) are compounds that specifically block QS systems without affecting bacterial growth and 2 such compounds, sulphur-containing AHL-analogues, reduced production of protease in a typical strain...... of Aeromonas salmonicida strains. All 31 typical strains were AHL producers as were 21 of 26 atypical strains, but on a strain population basis, production of virulence factors such as protease, lipase, A-layer or pigment did not correlate with the production and accumulation of AHLs in the growth medium...... of Aeromonas salmonicida. The most efficient compound N-(heptylsulfanylacetyl)-L-homoserine lactone (HepS-AHL), reduced protease production by a factor of 10. Five extracellular proteases were detected on gelatin-containing sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) gels and 3...

  16. Potential role of specific antibodies as important vaccine induced protective mechanism against Aeromonas salmonicida in rainbow trout.

    Directory of Open Access Journals (Sweden)

    Kasper Rømer Villumsen

    Full Text Available Furunculosis caused by infection with Aeromonas salmonicida subsp. salmonicida has been a known threat to aquaculture for more than a century. Efficient prophylactic approaches against this disease are essential for continued growth of salmonid aquaculture. Since the introduction of successful oil-adjuvanted vaccines in the early 1990's, a number of studies have been published on the protective as well as adverse effects of these vaccines. Most studies focus on vaccination of salmon (Salmo salar. However, rainbow trout (Oncorhynchus mykiss are also very susceptible to infection and are vaccinated accordingly. In this study we have examined the protection against infection with a Danish strain of A. salmonicida in both vaccinated and non-vaccinated rainbow trout. A commercial and an experimental auto-vaccine were tested. The protective effects of the vaccines were evaluated through an A. salmonicida challenge 18 weeks post vaccination. Both vaccines resulted in a significantly increased survival in the vaccinated fish during a 28 day challenge period relative to non-vaccinated fish (P = 0.01 and P = 0.001 for the commercial and experimental vaccine, respectively. Throughout the entire experiment, the presence of specific antibodies in plasma was monitored using ELISA. A significant increase in specific antibody levels was seen in fish vaccinated with both vaccines during the 18 weeks between vaccination and challenge. Within 3 days post challenge, a significant decrease in specific antibodies occurred in vaccinated fish. A positive correlation was found between mean levels of specific antibodies pre challenge and overall survival. This correlation, along with the observed depletion of antibodies during the initial phase of infection, suggests that specific antibodies play an essential role in vaccine mediated protection against A. salmonicida in rainbow trout.

  17. Synthesis, characterization and toxicological evaluation of Cr₂O₃ nanoparticles using Daphnia magna and Aliivibrio fischeri.

    Science.gov (United States)

    Puerari, Rodrigo Costa; da Costa, Cristina H; Vicentini, Denice S; Fuzinatto, Cristiane F; Melegari, Silvia P; Schmidt, Éder C; Bouzon, Zenilda L; Matias, William G

    2016-06-01

    Chromium III oxide (Cr2O3) nanoparticles (NPs) are used in pigments for ceramics, dyes, paints and cosmetics. However, few studies addressing the toxic potential of these NPs have been reported in the literature. Thus, this research aimed to evaluate the acute and chronic effects of Cr2O3 NPs through acute toxicity tests with Daphnia magna and Aliivibrio fischeri and chronic toxicity tests with Daphnia magna. Cr2O3 NPs were synthesized by the sol-gel method and characterized through TEM, X-Ray diffraction (XRD), zeta potential (ZP) and surface area analysis. In the acute toxicity tests the EC(50,48h) value obtained with D. magna was 6.79 mg L(-1) and for A. fischeri the EC(50,15min) value was 16.10 mg L(-1) and the EC(50,30min) value was 12.91 mg L(-1). Regarding the chronic toxicity tests with D. magna, effects on longevity (OEC=1.00 mg L(-1)), reproduction (OEC=1.00 mg L(-1)) and growth (OEC=0.50 mg L(-1)) were observed. On the SEM and TEM images, ultrastructural alterations in the organelles of exposed organisms were also observed. Thus, toxicological studies with NPs are of great importance in order to reduce the risk of environmental contamination. PMID:26890188

  18. Diversity and homogeneity among small plasmids of Aeromonas salmonicida subsp. salmonicida linked with geographical origin

    Directory of Open Access Journals (Sweden)

    Sabrina A Attéré

    2015-11-01

    Full Text Available Furunculosis, which is caused by Aeromonas salmonicida subsp. salmonicida, is a major salmonid disease in fish farms worldwide. Several plasmids found in this bacterium confer phenotypes such drug resistance and virulence. Small plasmids (pAsa1, pAsa2, pAsa3, and pAsal1 related to ColE1- and ColE2-type replicons are usually present in its normal plasmidome. In the present study, with the objective to investigate if these plasmids display particularities related to the origin of the isolates bearing them, a total of 153 isolates, including 78 new and 75 previously described, were analyzed for the presence of small plasmids by PCR and DNA restriction fragment profiling. A geographical dichotomy between Canadian and European isolates for their propensity to do not have pAsa3 or pAsal1 was found. In addition, the genotyping analysis led to the identification of two European isolates harboring an unusual pAsal1. An investigation by next-generation sequencing (NGS of these two isolates shed light on two pAsal1 variants (pAsal1C and pAsal1D. As with pAsal1B, another pAsal1 variant previously described, these two new variants bore a second insertion sequence (ISAS5 in addition to the usual ISAS11. The characterization of these variants suggested that they could predominate over the wild-type pAsal1 in stressful conditions such as growth at temperatures of 25°C and above. To obtain a comprehensive portrait of the mutational pressure on small plasmids, 26 isolates whose DNA had been sequenced by NGS were investigated. pAsa3 and pAsal1 were more prone to mutations than pAsa1 and pAsa2, especially in the mobA gene, which encodes a relaxase and a primase. Lastly, the average copy number of each plasmid per cell was assessed using raw sequencing data. A clear trend with respect to the relative proportion per cell of each plasmid was identified. Our large-scale study revealed a geographical dichotomy in small plasmid repertoire in addition to a clear trend

  19. QTL detection for Aeromonas salmonicida resistance related traits in turbot (Scophthalmus maximus

    Directory of Open Access Journals (Sweden)

    Martínez Paulino

    2011-11-01

    Full Text Available Abstract Background Interactions between fish and pathogens, that may be harmless under natural conditions, often result in serious diseases in aquaculture systems. This is especially important due to the fact that the strains used in aquaculture are derived from wild strains that may not have had enough time to adapt to new disease pressures. The turbot is one of the most promising European aquaculture species. Furunculosis, caused by the bacterium Aeromonas salmonicida, produces important losses to turbot industry. An appealing solution is to achieve more robust broodstock, which can prevent or diminish the devastating effects of epizooties. Genomics strategies have been developed in turbot to look for candidate genes for resistance to furunculosis and a genetic map with appropriate density to screen for genomic associations has been also constructed. In the present study, a genome scan for QTL affecting resistance and survival to A. salmonicida in four turbot families was carried out. The objectives were to identify consistent QTL using different statistical approaches (linear regression and maximum likelihood and to locate the tightest associated markers for their application in genetic breeding strategies. Results Significant QTL for resistance were identified by the linear regression method in three linkage groups (LGs 4, 6 and 9 and for survival in two LGs (6 and 9. The maximum likelihood methodology identified QTL in three LGs (5, 6 and 9 for both traits. Significant association between disease traits and genotypes was detected for several markers, some of them explaining up to 17% of the phenotypic variance. We also identified candidate genes located in the detected QTL using data from previously mapped markers. Conclusions Several regions controlling resistance to A. salmonicida in turbot have been detected. The observed concordance between different statistical methods at particular linkage groups gives consistency to our results. The

  20. Microencapsulated Aliivibrio fischeri in Alginate Microspheres for Monitoring Heavy Metal Toxicity in Environmental Waters

    Directory of Open Access Journals (Sweden)

    Dedi Futra

    2014-12-01

    Full Text Available In this article a luminescence fiber optic biosensor for the microdetection of heavy metal toxicity in waters based on the marine bacterium Aliivibrio fischeri (A. fischeri encapsulated in alginate microspheres is described. Cu(II, Cd(II, Pb(II, Zn(II, Cr(VI, Co(II, Ni(II, Ag(I and Fe(II were selected as sample toxic heavy metal ions for evaluation of the performance of this toxicity microbiosensor. The loss of bioluminescence response from immobilized A. fischeri bacterial cells corresponds to changes in the toxicity levels. The inhibition of the luminescent biosensor response collected at excitation and emission wavelengths of 287 ± 2 nm and 487 ± 2 nm, respectively, was found to be reproducible and repeatable within the relative standard deviation (RSD range of 2.4–5.7% (n = 8. The toxicity biosensor based on alginate micropsheres exhibited a lower limit of detection (LOD for Cu(II (6.40 μg/L, Cd(II (1.56 μg/L, Pb(II (47 μg/L, Ag(I (18 μg/L than Zn(II (320 μg/L, Cr(VI (1,000 μg/L, Co(II (1700 μg/L, Ni(II (2800 μg/L, and Fe(III (3100 μg/L. Such LOD values are lower when compared with other previous reported whole cell toxicity biosensors using agar gel, agarose gel and cellulose membrane biomatrices used for the immobilization of bacterial cells. The A. fischeri bacteria microencapsulated in alginate biopolymer could maintain their metabolic activity for a prolonged period of up to six weeks without any noticeable changes in the bioluminescence response. The bioluminescent biosensor could also be used for the determination of antagonistic toxicity levels for toxicant mixtures. A comparison of the results obtained by atomic absorption spectroscopy (AAS and using the proposed luminescent A. fischeri-based biosensor suggests that the optical toxicity biosensor can be used for quantitative microdetermination of heavy metal toxicity in environmental water samples.

  1. Immunohistochemical study of inducible nitric oxide synthase and tumour necrosis factor alpha response in turbot (Scophthalmus maximus) experimentally infected with Aeromonas salmonicida subsp. salmonicida.

    Science.gov (United States)

    Coscelli, Germán; Bermúdez, Roberto; Ronza, Paolo; Losada, Ana Paula; Quiroga, María Isabel

    2016-09-01

    Aeromonas salmonicida subsp. salmonicida represents one of the major threats in aquaculture, especially in salmonid fish and turbot farming. In order to fight bacterial infections, fish have an immune system composed by innate and specific cellular and humoral elements analogous to those present in mammals. However, innate immunity plays a primordial role against bacterial infections in teleost fish. Among these non-specific mechanisms, the production of nitric oxide (NO) by inducible nitric oxide synthase (iNOS) pathway and the tumour necrosis factor-alpha (TNFα) produced by mononuclear phagocytes, are two of the main immune effectors to eliminate bacterial pathogens. In this study, the distribution and kinetic of iNOS and TNFα-producing cells of kidney and spleen of turbot experimentally inoculated with A. salmonicida was assessed by immunohistochemistry. In control and challenged fish, individual iNOS(+) and TNFα(+) cells, showing a similar pattern of distribution, were detected. In challenged fish, the number of immunoreactive cells was significantly increased in the evaluated organs, as well as the melanomacrophage centres showed variable positivity for both antigens. These results indicate that A. salmonicida induced an immune response in challenged turbot, which involved the increase of the activity of iNOS and TNFα in the leukocytic population from kidney and spleen. PMID:27431586

  2. Different immunization routes induce protection against Aeromonas salmonicida through different immune mechanisms in rainbow trout

    DEFF Research Database (Denmark)

    Villumsen, Kasper Rømer; Raida, Martin Kristian

    in fish immunology and vaccinology, resulting in the development of both oral, immersion and injectable vaccine strategies over time. Applying mineral oil adjuvants, injectable vaccines inducing high levels of protection in salmon (Salmo salar) rose to prominence in the 1990’s. In general injectable...... of protection against experimental A. salmonicida infection in rainbow trout was positively correlated with the antibody levels immediately prior to the infection. The prolonged presence of specific antibodies and this correlation indicate an important role for specific antibodies in vaccine-induced protection...... against A. salmonicida. The effect of immersion vaccination against A. salmonicida has been questioned over time. While some have presented excellent protection as a result of immersion vaccines, others have reported limited or absent protective effects. We have performed experiments on the protection...

  3. Large genomic differences between the morphologically indistinguishable diplomonads Spironucleus barkhanus and Spironucleus salmonicida

    Directory of Open Access Journals (Sweden)

    Troell Karin

    2010-04-01

    Full Text Available Abstract Background Microbial eukaryotes show large variations in genome structure and content between lineages, indicating extensive flexibility over evolutionary timescales. Here we address the tempo and mode of such changes within diplomonads, flagellated protists with two nuclei found in oxygen-poor environments. Approximately 5,000 expressed sequence tag (EST sequences were generated from the fish commensal Spironucleus barkhanus and compared to sequences from the morphologically indistinguishable fish parasite Spironucleus salmonicida, and other diplomonads. The ESTs were complemented with sequence variation studies in selected genes and genome size determinations. Results Many genes detected in S. barkhanus and S. salmonicida are absent in the human parasite Giardia intestinalis, the most intensively studied diplomonad. For example, these fish diplomonads show an extended metabolic repertoire and are able to incorporate selenocysteine into proteins. The codon usage is altered in S. barkhanus compared to S. salmonicida. Sequence variations were found between individual S. barkhanus ESTs for many, but not all, protein coding genes. Conversely, no allelic variation was found in a previous genome survey of S. salmonicida. This difference was confirmed by sequencing of genomic DNA. Up to five alleles were identified for the cloned S. barkhanus genes, and at least nineteen highly expressed S. barkhanus genes are represented by more than four alleles in the EST dataset. This could be explained by the presence of a non-clonal S. barkhanus population in the culture, by a ploidy above four, or by duplications of parts of the genome. Indeed, genome size estimations using flow cytometry indicated similar haploid genome sizes in S. salmonicida and G. intestinalis (~12 Mb, whereas the S. barkhanus genome is larger (~18 Mb. Conclusions This study indicates extensive divergent genome evolution within diplomonads. Genomic traits such as codon usage

  4. Identification of a cyprinid fish, the tench Tinca tinca L., as a carrier of the bacterium Aeromonas salmonicida, causative agent of furunculosis in salmonids.

    Science.gov (United States)

    Bernoth, E M; Körting, W

    1992-10-01

    A typical, pigment-producing strain of Aeromonas salmonicida (A. sal.), the causative agent of furunculosis in salmonid fish species, was isolated from a cyprinid species, the tench Tinca tinca L. with papilloma-like skin alterations. Histopathology of the papilloma-like skin alterations in tench revealed "round holes", distinctly lined by thick layers of epithelial cells, but no bacteria. The organism was isolated from skin, gills and fins, but not internal organs. The isolate proved highly virulent for both juvenile tench and brown trout Salmo trutta L. in experimental infection, but it did not reproduce the clinical picture. The causative role of A. sal. for the surface lesions remains questionable. However, there is a perceived risk of the organism's transmission between tench and other susceptible species of fish, especially farmed trout. PMID:1462724

  5. Oceanivirga salmonicida gen. nov., sp. nov., a member of the Leptotrichiaceae isolated from Atlantic salmon (Salmo salar).

    Science.gov (United States)

    Eisenberg, Tobias; Kämpfer, Peter; Ewers, Christa; Semmler, Torsten; Glaeser, Stefanie P; Collins, Evelyn; Ruttledge, Margaret; Palmer, Roy

    2016-06-01

    A pleomorphic, Gram-negative, rod-shaped, indole-, oxidase- and catalase- negative, non-spore-forming, non-motile bacterium was originally isolated in 1992 from moribund, seawater farmed Atlantic salmon with multifocal tissue necrosis. Strain AVG 2115T displayed considerable similarities with Streptobacillus moniliformis, one of the two etiological agents of rat bite fever, and has been stored as Streptobacillus sp. NCIMB 703044T. On the basis of 16S rRNA gene sequence analyses, this strain displayed >99 % sequence similarities with uncultured bacterial clones from the digestive tracts of marine mammals, followed by Sneathia sanguinegens CCUG 41628T (92.7 %), 'Sneathia amnii' Sn35 (92.5 %), Caviibacter abscessus CCUG 39713T (92.2 %), Streptobacillus ratti OGS16T (91.3 %), Streptobacillus notomytis AHL 370-1T (91.2 %), S. moniliformis DSM 12112T (91.0 %), Streptobacillus felis 131000547T (90.9 %) and Streptobacillus hongkongensis DSM 26322T (89.7 %). Sequence similarities to all other taxa were below 89 %. Phylogenetic analysis for strain NCIMB 703044T revealed highly similar results for gyrB, groEL and recA nucleotide and deduced amino acid sequence analyses independent of the employed treeing method. Average nucleotide identities (ANI) for complete genomes ranged from 66.00 % to 72.08 % between strain NCIMB 703044T and the type strains of Sebaldella termitidis, Leptotrichiabuccalis, Streptobacillus moniliformis, Sneathia sanguinegens and Caviibacter abscessus. Chemotaxonomic and physiological data of strain NCIMB 703044t were in congruence with closely related members of the family Leptotrichiaceae, represented by highly similar enzyme profiles and fatty acid patterns. MALDI-TOF MS analysis was capable to clearly discriminate strain NCIMB 703044T from all currently described taxa of the family Leptotrichiaceae. On the basis of these data we propose the novel taxon Oceanivirga salmonicida gen. nov. sp. nov. with the type strain AVG 2115T

  6. Protection against atypical Aeromonas salmonicida infection in carp (Cyprinus carpio L.) by oral administration of humus extract.

    Science.gov (United States)

    Kodama, Hiroshi; Denso; Nakagawa, Tsuyoshi

    2007-04-01

    Humic substances are formed during the decomposition of organic matter in humus, and are found in many natural environments in which organic materials and microorganisms have been present. In the present study, oral administration of humus extract to common carp (Cyprinus carpio L.) induced effective protection against experimental atypical Aeromonas salmonicida infection. Mortality of fish and development of skin lesions such as hemorrhages and ulcers were significantly suppressed in carp treated with 10%, 5% or 1% humus extract adsorbed on dry feeding pellets. The median surviving days was also greater in fish treated with 10% or 5% humus extract than in untreated fish. Atypical A. salmonicida was isolated from ulcerative lesions of part of dead fish, but Aeromonas hydrophila and Flavobacterium sp. were also isolated from these fish, verifying bacterial population changes during the progression of skin lesions. These results clearly show that treatment of fish with humus extract is effective in preventing A. salmonicida disease.

  7. Comparative evaluation of infection methods and environmental factors on challenge success: Aeromonas salmonicida infection in vaccinated rainbow trout.

    Science.gov (United States)

    Chettri, Jiwan Kumar; Skov, Jakob; Jaafar, Rzgar M; Krossøy, Bjørn; Kania, Per W; Dalsgaard, Inger; Buchmann, Kurt

    2015-06-01

    When testing vaccine-induced protection an effective and reliable challenge method is a basic requirement and we here present a comparative study on different challenge methods used for infection of rainbow trout Oncorhynchus mykiss with Aeromonas salmonicida, a bacterial pathogen eliciting furunculosis. Fish were vaccinated with three different adjuvanted trivalent vaccines containing formalin killed A. salmonicida, Vibrio anguillarum O1 and O2a. These were 1) the commercial vaccine Alpha Ject 3000, 2) an experimental vaccine with water in paraffin oil adjuvant, 3) an experimental vaccine with water in paraffin oil in water adjuvant. Fish were then exposed to A. salmonicida challenge using i.p. injection, cohabitation in freshwater, cohabitation in saltwater (15 ppt) or combined fresh/saltwater cohabitation. Cohabitation reflects a more natural infection mode and was shown to give better differentiation of vaccine types compared to i.p. injection of live bacteria. The latter infection mode is less successful probably due to the intra-abdominal inflammatory reactions (characterized in this study according to the Speilberg scale) induced by i.p. vaccination whereby injected live bacteria more effectively become inactivated at the site of injection. Compared to cohabitation in freshwater, cohabitation in saltwater was less efficient probably due to reduced survivability of A. salmonicida in saltwater, which was also experimentally verified in vitro.

  8. Comparative evaluation of infection methods and environmental factors on challenge success: Aeromonas salmonicida infection in vaccinated rainbow trout.

    Science.gov (United States)

    Chettri, Jiwan Kumar; Skov, Jakob; Jaafar, Rzgar M; Krossøy, Bjørn; Kania, Per W; Dalsgaard, Inger; Buchmann, Kurt

    2015-06-01

    When testing vaccine-induced protection an effective and reliable challenge method is a basic requirement and we here present a comparative study on different challenge methods used for infection of rainbow trout Oncorhynchus mykiss with Aeromonas salmonicida, a bacterial pathogen eliciting furunculosis. Fish were vaccinated with three different adjuvanted trivalent vaccines containing formalin killed A. salmonicida, Vibrio anguillarum O1 and O2a. These were 1) the commercial vaccine Alpha Ject 3000, 2) an experimental vaccine with water in paraffin oil adjuvant, 3) an experimental vaccine with water in paraffin oil in water adjuvant. Fish were then exposed to A. salmonicida challenge using i.p. injection, cohabitation in freshwater, cohabitation in saltwater (15 ppt) or combined fresh/saltwater cohabitation. Cohabitation reflects a more natural infection mode and was shown to give better differentiation of vaccine types compared to i.p. injection of live bacteria. The latter infection mode is less successful probably due to the intra-abdominal inflammatory reactions (characterized in this study according to the Speilberg scale) induced by i.p. vaccination whereby injected live bacteria more effectively become inactivated at the site of injection. Compared to cohabitation in freshwater, cohabitation in saltwater was less efficient probably due to reduced survivability of A. salmonicida in saltwater, which was also experimentally verified in vitro. PMID:25783001

  9. Polymerase chain reaction (PCR)-based typing analysis of atypical isolates of the fish pathogen Aeromonas salmonicida

    DEFF Research Database (Denmark)

    Høie, S.; Dalsgaard, Inger; Aase, I.L.;

    1999-01-01

    Two hundred and five isolates of atypical Aeromonas salmonicida, recovered from a wide range of hosts and countries were characterized by polymerase chain reaction (PCR) targeting four genes. The chosen genes were those encoding the extracellular A-layer protein (AP), the serine protease (Sprot...

  10. Living in an Extremely Polluted Environment: Clues from the Genome of Melanin-Producing Aeromonas salmonicida subsp. pectinolytica 34melT

    OpenAIRE

    Pavan, María Elisa; Pavan, Esteban E.; López, Nancy I.; Levin, Laura; Pettinari, M. Julia

    2015-01-01

    Aeromonas salmonicida subsp. pectinolytica 34melT can be considered an extremophile due to the characteristics of the heavily polluted river from which it was isolated. While four subspecies of A. salmonicida are known fish pathogens, 34melT belongs to the only subspecies isolated solely from the environment. Genome analysis revealed a high metabolic versatility, the capability to cope with diverse stress agents, and the lack of several virulence factors found in pathogenic Aeromonas. The mos...

  11. Detection and quantification of Aeromonas salmonicida in fish tissue by real-time PCR

    DEFF Research Database (Denmark)

    Bartkova, Simona; Kokotovic, Branco; Skall, H. F.;

    2016-01-01

    developed real-time PCR assay targeting the plasmid encoded aopP gene of A. salmonicida was, in parallel with culturing, used for the examination of five organs of 40 fish from Danish freshwater and seawater farms. Real-time PCR showed overall a higher frequency of positives than culturing (65% of positive...... fish by real-time PCR compared to 30% by a culture approach). Also, no real-time PCR-negative samples were found positive by culturing. A. salmonicida was detected by real-time PCR, though not by culturing, in freshwater fish showing no signs of furunculosis, indicating possible presence of carrier...... fish. In seawater fish examined after an outbreak and antibiotics treatment, real-time PCR showed the presence of the bacterium in all examined organs (1-482 genomic units mg-1). With a limit of detection of 40 target copies (1-2 genomic units) per reaction, a high reproducibility and an excellent...

  12. Crystallization and preliminary X-ray diffraction analysis of a cold-adapted catalase from Vibrio salmonicida

    International Nuclear Information System (INIS)

    Monoclinic (P21) crystals of a His-tagged form of V. salmonicida catalase without cofactor diffract X-rays to 1.96 Å. Catalase (EC 1.11.1.6) catalyses the breakdown of hydrogen peroxide to water and molecular oxygen. Recombinant Vibrio salmonicida catalase (VSC) possesses typical cold-adapted features, with higher catalytic efficiency, lower thermal stability and a lower temperature optimum than its mesophilic counterpart from Proteus mirabilis. Crystals of VSC were produced by the hanging-drop vapour-diffusion method using ammonium sulfate as precipitant. The crystals belong to the monoclinic space group P21, with unit-cell parameters a = 98.15, b = 217.76, c = 99.28 Å, β = 110.48°. Data were collected to 1.96 Å and a molecular-replacement solution was found with eight molecules in the asymmetric unit

  13. Crystallization and preliminary X-ray diffraction analysis of a cold-adapted catalase from Vibrio salmonicida

    Energy Technology Data Exchange (ETDEWEB)

    Riise, Ellen Kristin [The Norwegian Structural Biology Centre, Faculty of Science, University of Tromsø, N-9037 Tromsø (Norway); Lorentzen, Marit Sjo [Department of Molecular Biotechnology, Institute of Medical Biology, Faculty of Medicine, University of Tromsø, N-9037 Tromsø (Norway); Helland, Ronny [The Norwegian Structural Biology Centre, Faculty of Science, University of Tromsø, N-9037 Tromsø (Norway); Willassen, Nils Peder, E-mail: nilspw@fagmed.uit.no [The Norwegian Structural Biology Centre, Faculty of Science, University of Tromsø, N-9037 Tromsø (Norway); Department of Molecular Biotechnology, Institute of Medical Biology, Faculty of Medicine, University of Tromsø, N-9037 Tromsø (Norway)

    2006-01-01

    Monoclinic (P2{sub 1}) crystals of a His-tagged form of V. salmonicida catalase without cofactor diffract X-rays to 1.96 Å. Catalase (EC 1.11.1.6) catalyses the breakdown of hydrogen peroxide to water and molecular oxygen. Recombinant Vibrio salmonicida catalase (VSC) possesses typical cold-adapted features, with higher catalytic efficiency, lower thermal stability and a lower temperature optimum than its mesophilic counterpart from Proteus mirabilis. Crystals of VSC were produced by the hanging-drop vapour-diffusion method using ammonium sulfate as precipitant. The crystals belong to the monoclinic space group P2{sub 1}, with unit-cell parameters a = 98.15, b = 217.76, c = 99.28 Å, β = 110.48°. Data were collected to 1.96 Å and a molecular-replacement solution was found with eight molecules in the asymmetric unit.

  14. Comparative evaluation of infection methods and environmental factors on challenge success: Aeromonas salmonicida infection in vaccinated rainbow trout

    DEFF Research Database (Denmark)

    Chettri, Jiwan Kumar; Skov, Jakob; Jaafar, Rzgar M.;

    2015-01-01

    When testing vaccine-induced protection an effective and reliable challenge method is a basic requirement and we here present a comparative study on different challenge methods used for infection of rainbow trout Oncorhynchus mykiss with Aeromonas salmonicida, a bacterial pathogen eliciting...... furunculosis. Fish were vaccinated with three different adjuvanted trivalent vaccines containing formalin killed A. salmonicida, Vibrio anguillarum O1 and O2a. These were 1) the commercial vaccine Alpha Ject 3000, 2) an experimental vaccine with water in paraffin oil adjuvant, 3) an experimental vaccine...... differentiation of vaccine types compared to i.p. injection of live bacteria. The latter infection mode is less successful probably due to the intra-abdominal inflammatory reactions (characterized in this study according to the Speilberg scale) induced by i.p. vaccination whereby injected live bacteria more...

  15. Effect of a phytogenic feed additive on the susceptibility of Onchorhynchus mykiss to Aeromonas salmonicida.

    Science.gov (United States)

    Menanteau-Ledouble, S; Krauss, I; Santos, G; Fibi, S; Weber, B; El-Matbouli, M

    2015-06-29

    In recent years, feed additives have increasingly been adopted by the aquaculture industry. These supplements not only offer an alternative to antibiotics but have also been linked to enhanced growth performance. However, the literature is still limited and provides contradictory information on their effectiveness. This is mainly due to the wide variety of available products and their complex mechanisms of action. Phytogenic feed additives have been shown to have antimicrobial effects and can improve growth performance. In the present study, we investigated the susceptibility of several fish pathogenic bacteria to a phytogenic essential oil product in vitro. In addition, we determined the protective effect of a commercial phytogenic feed additive containing oregano, anis and citrus oils on the resistance of rainbow trout Oncorhynchus mykiss to infection by Aeromonas salmonicida. The bacterium was administered through 3 different routes: intra-peritoneal injection, immersion in a bacterial solution and cohabitation with infected fish. Mortality rates were significantly lower in infected rainbow trout that had received the feed additive: the overall mortality rate across all routes of infection was 18% in fish fed a diet containing the additive compared to 37% in fish that received unsupplemented feed. The route of infection also significantly impacted mortality, with average mortality rates of 60, 17.5 and 5% for intra-peritoneal injection, immersion and cohabitation, respectively. In general, fish were better protected against infection by immersion than infection by injection. PMID:26119300

  16. Ulcer disease prophylaxis in koi carp by bath immersion with chicken egg yolk containing anti-Aeromonas salmonicida IgY.

    Science.gov (United States)

    Gan, Hongjian; He, Haiwen; Sato, Atsushi; Hatta, Hajime; Nakao, Miki; Somamoto, Tomonori

    2015-04-01

    Ulcer disease, caused by atypical Aeromonas salmonicida, is a serious concern in ornamental koi carp, because it induces skin ulceration, disfiguring ornamental fish and causing economic loses. The present study aimed to establish a novel prophylaxis with chicken egg yolk immunoglobulin, IgY, against ulcer disease and to assess its feasibility in the ornamental fish industry. Addition of egg yolk powder containing anti-A. salmonicida IgY to rearing water provided significant protection against an A. salmonicida bath infection, whereas administration of non-specific IgY did not. Consecutive immersion of fish into rearing water containing specific IgY completely prevented ulcer disease resulting from cohabitation infection, indicating that this prophylaxis could prevent infection from such type of contact. Thus, passive immunization induced by immersing fish into aquarium water containing specific IgY is a prospective prophylaxis against diseases caused by pathogens that invade the skin and gills. PMID:25687817

  17. Characterization of class 1 integrons associated with R-plasmids in clinical Aeromonas salmonicida isolates from various geographical areas

    DEFF Research Database (Denmark)

    Schmidt, A.S.; Bruun, Morten Sichlau; Larsen, J.L.;

    2001-01-01

    inserts. The gene cassettes tended to be conserved among isolates from a particular geographical area. Nineteen isolates transferred R- plasmids carrying different tet determinants to Escherichia coli in filter mating assays, and in 15 cases, the class 1 integrons were co-transferred. Transferable......Class 1 integrons were found in 26 of 40 antibiotic-resistant isolates of the fish pathogen Aeromonas salmonicida from Northern Europe and North America. Three different dhfr genes, conferring trimethoprim resistance, and one ant(3 " )1a aminoglycoside resistance gene were identified as gene...

  18. A novel challenge method with Aeromonas salmonicida in rainbow trout for evaluation of furunculosis vaccines

    DEFF Research Database (Denmark)

    Marana, Moonika Haahr; Skov, Jakob; Chettri, Jiwan Kumar;

    Challenge methods used to induce furunculosis in rainbow trout when testing the potency of vaccines may include exposure to Aeromonas salmonicida by intraperitoneal injection, cohabitation or bath immersion. Intraperitoneal injection is effective but will not reflect systemic immunity because...... inflammatory cells at the vaccine injection site may combat injected bacteria fast. The cohabitation and bath immersion methods both mimic the natural infection route but are less effective in inducing the disease. We have tested a new challenge method mimicking that rainbow trout in fish farms might...

  19. Bactericidal activity of juvenile chinook salmon macrophages against Aeromonas salmonicida after exposure to live or heat-killed Renibacterium salmoninarum or to soluble proteins produced by R. salmoninarum

    Science.gov (United States)

    Siegel, D.C.; Congleton, J.L.

    1997-01-01

    Macrophages isolated from the anterior kidney of juvenile chinook salmon Oncorhynchus tshawytscha in 96-well microtiter plates were exposed for 72 h to 0, 105, or 106 live or heat-killed Renibacterium salmoninarum cells per well or to 0, 0.1, 1.0, or 10 ??g/mL of R. salmoninarum soluble proteins. After treatment, the bactericidal activity of the macrophages against Aerornonas salmonicida was determined by a colorimetric assay based on the reduction of the tetrazolium dye MTT to formazan by viable bacteria. The MTT assay was modified to allow estimation of the percentage of bacteria killed by reference to a standard curve relating the number of bacteria added to microtiter wells to absorbance by formazan at 600 nm. The live and heat-killed R. salmoninarum treatments significantly (P < 0.001) increased killing of A. salmonicida by chinook salmon macrophages. In each of the five trials, significantly (P < 0.05) greater increases in killing occurred after exposure to 105 R. salmoninarum cells than to 106 R. salmoninarum cells per well. In contrast, treatment of macrophages with 10 ??g/mL R. salmoninarum soluble proteins significantly (P < 0.001) decreased killing of A. salmonicida, but treatment with lower doses did not. These results show that the bactericidal activity of chinook salmon macrophages is stimulated by exposure to R. salmoninarum cells at lower dose levels but inhibited by exposure to R. salmoninarum cells or soluble proteins at higher dose levels.

  20. Transcription factor T-bet in Atlantic salmon: Characterization and gene expression in mucosal tissues during Aeromonas salmonicida infection

    Directory of Open Access Journals (Sweden)

    Jaya eKumari

    2015-07-01

    Full Text Available The T-box transcription factor T-bet is expressed in a number of hematopoietic cell types in mammals and plays an essential role in the lineage determination of Th1 T-helper cells and is considered as an essential feature for both innate and adaptive immune responses in higher vertebrates. In the present study, we have identified and characterized the full-length Atlantic salmon T-bet cDNA (3502 bp. The putative primary structure of the polypeptide deduced from the cDNA sequence contained 612 aa, which possessed a T-box DNA binding domain. Phylogenetic study and gene synteny revealed it is a homologue to mammalian T-bet. Quantitative PCR analysis of different tissues in healthy fish showed that salmon T-bet gene was highly expressed in spleen, followed by head kidney, and was expressed in intestine, skin, and liver at lower levels. Moreover, the time dependent expression profile of T-bet, interferon gamma (IFNγ, interleukin-22 (IL-22, and NKEF (Natural killer enhancement factor in mucosal tissues during waterborne infection with live Aeromonas salmonicida, indicated the involvement of T-bet in mucosal immune response in Atlantic salmon.

  1. Effects of dietary linseed oil on innate immune system of Eurasian perch and disease resistance after exposure to Aeromonas salmonicida achromogen.

    Science.gov (United States)

    Geay, F; Mellery, J; Tinti, E; Douxfils, J; Larondelle, Y; Mandiki, S N M; Kestemont, P

    2015-12-01

    This study was designated to investigate the effects of dietary fish oil (FO diet) replacement by linseed oil (LO diet) on regulation of immune response and disease resistance in Eurasian perch (Perca fluviatilis). A control diet containing fish oil (FO = cod liver oil) and characterized by high levels of n-3 high LC-PUFA (6% EPA, 7.5% of total fatty acids (FAs)) was compared to linseed oil diet (LO diet) composed of low LC-PUFA contents (1% EPA, 2.3% DHA of total FAs) but high C18 fatty acids levels. The experiment was conducted in quadruplicate groups of 80 fish each. After 10 weeks of feeding, the innate immune status was evaluated in various organs (liver, spleen, and head-kidney) (feeding condition). Two days later, a bacterial challenge was performed on fish from 2 rearing conditions: fish infected with Aeromonas salmonicida (bacteria condition) and fish injected with sterile medium but maintained in the same flow system that fish challenged with bacteria (sentinel condition). Three days after injection of bacteria, a significant decrease of lymphocyte, thrombocyte and basophil populations was observed while neutrophils were not affected. In addition, plasma lysozyme activity and reactive oxygen species production in kidney significantly increased in fish challenged with A. salmonicida while the plasma alternative complement pathway activity was not affected. Increase of plasma lysozyme activity as well as reactive oxygen species production in spleen and kidney of sentinel fish suggest that these immune defenses can also be activated, but at lower bacteria concentration than infected fish. No differences in leucocyte populations, plasma lysozyme and alternative complement pathway activities were observed between dietary treatments. Similarly, expression of genes related to eicosanoid synthesis in liver were not affected by the dietary oil source but were strongly stimulated in fish challenged with A. salmonicida. These findings demonstrated that the use of

  2. Effects of dietary linseed oil on innate immune system of Eurasian perch and disease resistance after exposure to Aeromonas salmonicida achromogen.

    Science.gov (United States)

    Geay, F; Mellery, J; Tinti, E; Douxfils, J; Larondelle, Y; Mandiki, S N M; Kestemont, P

    2015-12-01

    This study was designated to investigate the effects of dietary fish oil (FO diet) replacement by linseed oil (LO diet) on regulation of immune response and disease resistance in Eurasian perch (Perca fluviatilis). A control diet containing fish oil (FO = cod liver oil) and characterized by high levels of n-3 high LC-PUFA (6% EPA, 7.5% of total fatty acids (FAs)) was compared to linseed oil diet (LO diet) composed of low LC-PUFA contents (1% EPA, 2.3% DHA of total FAs) but high C18 fatty acids levels. The experiment was conducted in quadruplicate groups of 80 fish each. After 10 weeks of feeding, the innate immune status was evaluated in various organs (liver, spleen, and head-kidney) (feeding condition). Two days later, a bacterial challenge was performed on fish from 2 rearing conditions: fish infected with Aeromonas salmonicida (bacteria condition) and fish injected with sterile medium but maintained in the same flow system that fish challenged with bacteria (sentinel condition). Three days after injection of bacteria, a significant decrease of lymphocyte, thrombocyte and basophil populations was observed while neutrophils were not affected. In addition, plasma lysozyme activity and reactive oxygen species production in kidney significantly increased in fish challenged with A. salmonicida while the plasma alternative complement pathway activity was not affected. Increase of plasma lysozyme activity as well as reactive oxygen species production in spleen and kidney of sentinel fish suggest that these immune defenses can also be activated, but at lower bacteria concentration than infected fish. No differences in leucocyte populations, plasma lysozyme and alternative complement pathway activities were observed between dietary treatments. Similarly, expression of genes related to eicosanoid synthesis in liver were not affected by the dietary oil source but were strongly stimulated in fish challenged with A. salmonicida. These findings demonstrated that the use of

  3. Efficacy of an extract from garlic, Allium sativum, against infection with the furunculosis bacterium, Aeromonas salmonicida, in rainbow trout, Oncorhynchus mykiss

    Science.gov (United States)

    Breyer, Kate E.; Getchell, Rodman G.; Cornwell, Emily R.; Wooster, Gregory A.; Ketola, H. George; Bowser, Paul R.

    2015-01-01

    Juvenile rainbow trout, Oncorhynchus mykiss, were fed diets containing 0, 0.5, 1.0, and 2.0% of a garlic extract, challenged with a modified 50% lethal dose of Aeromonas salmonicida and monitored for 28 d. There were significant increases in survival of trout fed 0.5 and 1.0% garlic extract as compared to the control and 2.0% garlic extract groups. A target animal safety study was performed at varying increments using the target dose of 0.5% garlic extract at 0× (0% garlic extract), 1× (0.5% garlic extract), 3× (1.5% garlic extract), and 5× (2.5% garlic extract) for 3× (6 wk) the duration of the original study. There was a significant increase in the level of circulating lymphocytes and a significant decrease in the level of circulating monocytes. The latter correlated to an increased level of pigment-containing macrophage centers within the renal tissue as garlic extract dosing increased, denoting a potential deleterious inflammatory effect as macrophage infiltration became severe at the highest dose. These studies suggest that feeding low-dose (0.5% or 1.0%) garlic extract improves survivability in rainbow trout when challenged with A. salmonicida and appears safe; however, higher levels do not appear to be effective and may cause deleterious effects on health.

  4. Innate and adaptive immune responses of Arctic charr (Salvelinus alpinus, L.) during infection with Aeromonas salmonicida subsp. achromogenes and the effect of the AsaP1 toxin.

    Science.gov (United States)

    Schwenteit, Johanna M; Breithaupt, Angele; Teifke, Jens P; Koppang, Erling O; Bornscheuer, Uwe T; Fischer, Uwe; Gudmundsdottir, Bjarnheidur K

    2013-09-01

    Aeromonas salmonicida subsp. achromogenes, the causative agent of atypical furunculosis in many fish species, secretes the toxic metalloendopeptidase AsaP1. This study aimed to analyze innate and adaptive immune parameters induced in Arctic charr (Salvelinus alpinus, L.) infected with wild type (wt) A. salmonicida subsp. achromogenes and its isogenic asaP1 deletion mutant (AsaP1-deficient). Head-kidney, liver and spleen were obtained from i.p. infected charr (wt, AsaP1-deficient), during a time schedule of 7 d post infection. Reverse transcription quantitative real-time PCR (RT-qPCR) was applied to study the expression of immune parameters: pro-inflammatory cytokines IL-1β and TNF-α; anti-inflammatory cytokine IL-10; chemokines CXCL-8 (IL-8) and CC-chemokine; the cytokines IFN-γ and IL-4/13A as tracers for Th1 and Th2 immune responses, respectively; and the cell markers CD8α and CD83. In addition, lymphoid organs were histopathologically examined at days 3 and 7 post infection, including B (IgM) and T (CD3ε) cell staining. The detected immune responses were initially driven by innate mechanisms represented by the up-regulation of pro-inflammatory cytokines and chemokines and later on by adaptive Th2 related responses cumulating in B-cell recruitment as shown by regulation of immune parameters in spleen and head-kidney, with significant differences between mutant and wt infected fish. Histological sections revealed IgM-positive cells around ellipsoid arterioles in spleen, while CD3ε positive cells were found in clusters scattered all over the section. However, histopathological differences were only detected between infected and non-infected fish, but not between AsaP1-deficient mutant and wt infected fish. This work represents the first study on innate and adaptive immune responses of Arctic charr induced by a bacterial infection. PMID:23811350

  5. Steelhead trout Oncorhynchus mykiss metabolic rate is affected by dietary Aloe vera inclusion but not by mounting an immune response against formalin-killed Aeromonas salmonicida.

    Science.gov (United States)

    Zanuzzo, F S; Urbinati, E C; Nash, G W; Gamperl, A K

    2015-07-01

    The oxygen consumption (MO2) of two groups of 10° C acclimated steelhead trout Oncorhynchus mykiss was measured for 72 h after they were given a 100 µl kg(-1) intraperitoneal injection of formalin-killed Aeromonas salmonicida (ASAL) or phosphate-buffered saline (PBS). In addition, plasma cortisol levels were measured in fish from both groups prior to, and 1 and 3 h after, they were given a 30 s net stress. The first group was fed an unaltered commercial diet for 4 weeks, whereas the second group was fed the same diet but with 0·5% (5 g kg(-1) ) Aloe vera powder added; A. vera has potential as an immunostimulant for use in aquaculture, but its effects on basal and acute phase response (APR)-related metabolic expenditures and stress physiology, are unknown. Injection of ASAL v. PBS had no measurable effect on the MO2 of O. mykiss indicating that the APR in this species is not associated with any net increase in energy expenditure. In contrast, incorporating 0·5% A. vera powder into the feed decreased routine metabolic rate by c. 8% in both injection groups and standard metabolic rate in the ASAL-injected group (by c. 4 mg O2 kg(-1) h(-1) ; 5%). Aloe vera fed fish had resting cortisol levels that were approximately half of those in fish on the commercial diet (c. 2·5 v. 5·0 ng ml(-1) ), but neither this difference nor those post-stress reached statistical significance (P > 0·05).

  6. Crystallization and preliminary X-ray diffraction studies of AsaP1_E294A and AsaP1_E294Q, two inactive mutants of the toxic zinc metallopeptidase AsaP1 from Aeromonas salmonicida subsp. achromogenes

    OpenAIRE

    Bogdanović, Xenia; Singh, Rajesh Kumar; Hentschke, Johanna; Gudmundsdóttir, Bjarnheidur K.; Hinrichs, Winfried

    2009-01-01

    Crystallization and preliminary X-ray diffraction studies of AsaP1_E294A and AsaP1_E294Q, two inactive mutants of the toxic zinc metallopeptidase AsaP1 from A. salmonicida subsp. achromogenes, are reported.

  7. Experimental infection with different bacterial strains in larvae and juvenile Litopenaeus vannamei reared in Santa Catarina State, Brazil - doi: 10.4025/actascibiolsci.v32i3.5471 Experimental infection with different bacterial strains in larvae and juvenile Litopenaeus vannamei reared in Santa Catarina State, Brazil - doi: 10.4025/actascibiolsci.v32i3.5471

    Directory of Open Access Journals (Sweden)

    Adolfo Jatoba

    2010-09-01

    Full Text Available This study evaluated the pathogenic characteristics of bacteria isolated from Litopenaeus vannamei during an outbreak at the Laboratory of Marine Shrimp, UFSC, Santa Catarina State, Brazil. Their virulence potential in larvae and juvenile shrimp and the effects on the total haemocyte count, phenoloxidase activity and serum agglutinate titre were examined after experimental infection. Bacterial strains were isolated from larvae and adult shrimps, identified by the AP120E biochemical system as: two strains of Vibrio alginolyticus, three of Aeromonas salmonicida and one of Pasteurella multocida sp. and Pasteurella sp. All the bacterial strains isolated in this study caused mortality in shrimp. One strain of V. alginolyticus was responsible for 97.3 and 88.7% mortality in larvae and juvenil shrimps, respectively. The shrimp immunological system was influenced by experimental infection with V. alginolyticus. Decrease in the total haemocyte count and increase in the phenoloxidase activity and the serum agglutinate titre (p V. alginolyticus isolated from larvae and juvenile reared marine shrimp.This study evaluated the pathogenic characteristics of bacteria isolated from Litopenaeus vannamei during an outbreak at the Laboratory of Marine Shrimp, UFSC, Santa Catarina State, Brazil. Their virulence potential in larvae and juvenile shrimp and the effects on the total haemocyte count, phenoloxidase activity and serum agglutinate titre were examined after experimental infection. Bacterial strains were isolated from larvae and adult shrimps, identified by the AP120E biochemical system as: two strains of Vibrio alginolyticus, three of Aeromonas salmonicida and one of Pasteurella multocida sp. and Pasteurella sp. All the bacterial strains isolated in this study caused mortality in shrimp. One strain of V. alginolyticus was responsible for 97.3 and 88.7% mortality in larvae and juvenil shrimps, respectively. The shrimp immunological system was influenced by

  8. Insights into bacterial protection and survival. A study of three enzymes from cold-adapted bacteria

    OpenAIRE

    Grgic, Miriam

    2015-01-01

    Paper II of this thesis is not available in Munin.Properties and distribution of a metallo-β-lactamase (ALI-1) from the fish pathogen Aliivibrio salmonicida LFI1238. Kristiansen Anders; Grgic Miriam; Altermark Bjørn; Leiros Ingar. Available in Journal of Antimicrobial Chemotherapy, 2014, vol. 70, issue 3 Bacteria are the most abundant organisms and can be found in different habitats, from polar regions, deserts and volcanoes, deep ocean trenches to the upper atmosphere. In all these envir...

  9. Temperature-dependent in vitro antimicrobial activity of four 4-quinolones and oxytetracycline against bacteria pathogenic to fish.

    OpenAIRE

    Martinsen, B; Oppegaard, H; Wichstrøm, R; Myhr, E

    1992-01-01

    The in vitro antimicrobial activities of oxolinic acid, flumequine, sarafloxacin, enrofloxacin, and oxytetracycline against strains of bacteria pathogenic to fish (Aeromonas salmonicida subsp. salmonicida, atypical A. salmonicida, Vibrio salmonicida, Vibrio anguillarum, and Yersinia ruckeri) were determined at two different incubation temperatures, 4 and 15 degrees C, by a drug microdilution method. The main objective of the study was to examine the effect of incubation temperature on the in ...

  10. Experimental infection with different bacterial strains in larvae and juvenile Litopenaeus vannamei reared in Santa Catarina State, Brazil = Infecção experimental em larvas e juvenis de Litopaenaeus vannamei cultivados no Estado de Santa Catarina, Brasil

    Directory of Open Access Journals (Sweden)

    Celso Carlos Buglione

    2010-07-01

    Full Text Available This study evaluated the pathogenic characteristics of bacteria isolated from Litopenaeus vannamei during an outbreak at the Laboratory of Marine Shrimp, UFSC, Santa Catarina State, Brazil. Their virulence potential in larvae and juvenile shrimp and theeffects on the total haemocyte count, phenoloxidase activity and serum agglutinate titre were examined after experimental infection. Bacterial strains were isolated from larvae and adult shrimps, identified by the AP120E biochemical system as: two strains of Vibrioalginolyticus, three of Aeromonas salmonicida and one of Pasteurella multocida sp. and Pasteurella sp. All the bacterial strains isolated in this study caused mortality in shrimp. One strain of V. alginolyticus was responsible for 97.3 and 88.7% mortality in larvae and juvenil shrimps, respectively. The shrimp immunological system was influenced by experimental infection with V. alginolyticus. Decrease in the total haemocyte count and increase in the phenoloxidase activity and the serum agglutinate titre (p Este estudo avaliou as características patogênicas de cepas de bactérias isoladas de Litopenaeus vannamei durante surto de mortalidade no Laboratório de Camarões Marinhos, UFSC, Estado de Santa Catarina, Brasil. Seu potencial de virulência em larvas e juvenis de camarão marinho e os efeitos sobre a contagem total de hemócito, atividade de fenoloxidase e título aglutinante do soro foramavaliados após infecção experimental. As cepas bacterianas foram isoladas de larvas e de camarões adultos e identificadas bioquimicamente pelo sistema API20E como: duas cepas de Vibrio alginolyticus, três de Aeromonas salmonicida e uma de Pasteurella sp. e P. multocida. Todas as cepas isoladas provocaram mortalidade em L. vannamei, e uma de V. alginolyticus resultou em mortalidade de 97,3 e 88,7% para larvas e juvenis de camarões, respectivamente. O sistema imunológico dos camarões juvenis sofreu influência da infecção experimental

  11. Geobacteraceae strains and methods

    Energy Technology Data Exchange (ETDEWEB)

    Lovley, Derek R.; Nevin, Kelly P.; Yi, Hana

    2015-07-07

    Embodiments of the present invention provide a method of producing genetically modified strains of electricigenic microbes that are specifically adapted for the production of electrical current in microbial fuel cells, as well as strains produced by such methods and fuel cells using such strains. In preferred embodiments, the present invention provides genetically modified strains of Geobacter sulfurreducens and methods of using such strains.

  12. Muscle strain (image)

    Science.gov (United States)

    A muscle strain is the stretching or tearing of muscle fibers. A muscle strain can be caused by sports, exercise, a ... something that is too heavy. Symptoms of a muscle strain include pain, tightness, swelling, tenderness, and the ...

  13. Muscle strain treatment

    Science.gov (United States)

    Treatment - muscle strain ... Question: How do you treat a muscle strain ? Answer: Rest the strained muscle and apply ice for the first few days after the injury. Anti-inflammatory medicines or acetaminophen ( ...

  14. 杀鲑气单胞菌对大西洋鲑游泳行为和血细胞数量的影响%The impacts of Aeromonas salmonicida on swimming behavior and numbers of blood cells of Atlantic salmon (Salmo salar L.)

    Institute of Scientific and Technical Information of China (English)

    衣萌萌; 孙国祥; 杜以帅; 刘鹰; 王顺奎; 于凯松

    2015-01-01

    为探讨利用鱼类行为及血细胞数量变化预警杀鲑气单胞菌(Aeromonas salmonicida)病害发生的可行性,监测了生产中感染杀鲑气单胞菌的大西洋鲑(Salmo salar L.)的游泳行为,以及杀鲑气单胞菌攻毒后大西洋鲑血细胞数量的变化。实验采用同一养殖基地和同一批次的大西洋鲑,其中现场实验鱼选自生产车间健康的和感染杀鲑气单胞菌的养殖鱼,攻毒实验中处理组实验鱼每尾背肌注射100µL、浓度为3.05×107CFU/mL的菌液,对照组注射等体积灭菌生理盐水。现场实验表明,感染杀鲑气单胞菌的大西洋鲑临界游泳速度较健康鱼低26.7%(P<0.05),摆尾频率与游泳速度的线性回归方程的斜率也存在显著差异(P<0.05)。攻毒实验表明,从攻毒的第4天开始,处理组大西洋鲑白细胞、淋巴细胞、单核细胞和粒细胞数量较对照组均发生显著变化,其中第6天的变化最为显著,白细胞总数、粒细胞数分别降低了2.8%和43.9%(P<0.05),淋巴细胞数及单核细胞数分别升高了63.3%和23.9%(P<0.05),且处理组4种血细胞数随时间呈现显著的线性变化(P<0.05)。研究结果表明通过监测大西洋鲑游泳行为(临界游泳速度和摆尾频率)以及血细胞相关指标的变化可快速判断其健康状况,为病害的早期预警提供依据。%We investigated the feasibility of monitoring the health of Atlantic salmon (Salmo salar L.) to facilitate development of an early warning system for disease. To do this, we recorded changes in the swimming behavior and blood composition in the salmon after challenge with Aeromonas salmonicida. The fish used for the in situ challenge experiments were the same batch from the same farm. Healthy fish and fish infected with A. salmonicida were used for the in situ experiments. Salmon were injected in the dorsal muscle with 100 µL of A. salmonicida at 3.05×107 colony forming units (CFU)/mL per fish

  15. Program Calibrates Strain Gauges

    Science.gov (United States)

    Okazaki, Gary D.

    1991-01-01

    Program dramatically reduces personnel and time requirements for acceptance tests of hardware. Data-acquisition system reads output from Wheatstone full-bridge strain-gauge circuit and calculates strain by use of shunt calibration technique. Program nearly instantaneously tabulates and plots strain data against load-cell outputs. Modified to acquire strain data for other specimens wherever full-bridge strain-gauge circuits used. Written in HP BASIC.

  16. Strains and Sprains

    Science.gov (United States)

    ... ON THIS TOPIC Sports Medicine Center Preventing Children's Sports Injuries Computer-Related Repetitive Stress Injuries Knee Injuries Broken ... Knee Injuries Sports and Exercise Safety Dealing With Sports Injuries Groin Strain Ankle Sprains Strains and Sprains Stretching ...

  17. Strained Silicon Photonics

    OpenAIRE

    Wehrspohn, Ralf B; Jörg Schilling; Christian Bohley; Clemens Schriever

    2012-01-01

    A review of recent progress in the field of strained silicon photonics is presented. The application of strain to waveguide and photonic crystal structures can be used to alter the linear and nonlinear optical properties of these devices. Here, methods for the fabrication of strained devices are summarized and recent examples of linear and nonlinear optical devices are discussed. Furthermore, the relation between strain and the enhancement of the second order nonlinear susceptibility is inves...

  18. Diffraction tomography of strain

    OpenAIRE

    Lionheart, W R B; Withers, P. J.

    2015-01-01

    We consider whether it is possible to recover the three dimensional strain field tomographically from neutron and x-ray diffraction data for polycrystalline materials. We show that the distribution of strain transverse to a ray cannot be deduced from one diffraction pattern accumulated along that path, but that a certain moment of that data corresponds to the transverse ray transform of the strain tensor and so may be recovered by inverting that transform given sufficient data. We show that t...

  19. Strained Silicon Photonics

    Directory of Open Access Journals (Sweden)

    Ralf B. Wehrspohn

    2012-05-01

    Full Text Available A review of recent progress in the field of strained silicon photonics is presented. The application of strain to waveguide and photonic crystal structures can be used to alter the linear and nonlinear optical properties of these devices. Here, methods for the fabrication of strained devices are summarized and recent examples of linear and nonlinear optical devices are discussed. Furthermore, the relation between strain and the enhancement of the second order nonlinear susceptibility is investigated, which may enable the construction of optically active photonic devices made of silicon.

  20. Strain-engineered MOSFETs

    CERN Document Server

    Maiti, CK

    2012-01-01

    Currently strain engineering is the main technique used to enhance the performance of advanced silicon-based metal-oxide-semiconductor field-effect transistors (MOSFETs). Written from an engineering application standpoint, Strain-Engineered MOSFETs introduces promising strain techniques to fabricate strain-engineered MOSFETs and to methods to assess the applications of these techniques. The book provides the background and physical insight needed to understand new and future developments in the modeling and design of n- and p-MOSFETs at nanoscale. This book focuses on recent developments in st

  1. Highly Strained Organophosphorus Compounds

    NARCIS (Netherlands)

    Slootweg, J.C.

    2005-01-01

    In our research on small, strained organophosphorus ring systems we became interested in the synthesis and applications of species that are even more strained than the parent phosphirane, by introducing an exocyclic double bond (methylenephosphirane), and by cyclopropyl spirofusion to the edge (e.g

  2. Sprains and Strains

    Science.gov (United States)

    ... people at risk for strains. Gymnastics, tennis, rowing, golf, and other sports that require extensive gripping can ... Trials and You was designed to help people learn more about clinical trials, why they matter, and ...

  3. The strained state cosmology

    CERN Document Server

    Tartaglia, Angelo

    2015-01-01

    Starting from some relevant facts concerning the behaviour of the universe over large scale and time span, the analogy between the geometric approach of General Relativ- ity and the classical description of an elastic strained material continuum is discussed. Extending the elastic deformation approach to four dimensions it is shown that the accelerated expansion of the universe is recovered. The strain field of space-time repro- duces properties similar to the ones ascribed to the dark energy currently called in to explain the accelerated expansion. The strain field in the primordial universe behaves as radiation, but asymptotically it reproduces the cosmological constant. Subjecting the theory to a number of cosmological tests confirms the soundness of the approach and gives an optimal value for the one parameter of the model, i.e. the bulk modulus of the space-time continuum. Finally various aspects of the Strained State Cosmology (SSC) are discussed and contrasted with some non-linear massive gravity theor...

  4. An Ultrasonic Strain Gauge

    OpenAIRE

    Kersemans, Mathias; Allaer, Klaas; Degrieck, Joris; Van Den Abeele, Koen; Pyl, Lincy; Zastavnik, Filip; Sol, Hugo; Van Paegem, Wim

    2014-01-01

    A method is introduced for the measurements of strain exploiting the interaction between ultrasound waves and characteristics of the insonified specimen. First, the response of obliquely incident harmonic waves to a deterministic surface roughness is utilized. Analysis of backscattered amplitudes in Bragg diffraction geometry then yields a measure for the in-plane strain field by mapping any shift in angular dependency. Secondly, the analysis of the reflection characteristics of normal incide...

  5. Muscle strain injuries.

    Science.gov (United States)

    Garrett, W E

    1996-01-01

    One of the most common injuries seen in the office of the practicing physician is the muscle strain. Until recently, little data were available on the basic science and clinical application of this basic science for the treatment and prevention of muscle strains. Studies in the last 10 years represent action taken on the direction of investigation into muscle strain injuries from the laboratory and clinical fronts. Findings from the laboratory indicate that certain muscles are susceptible to strain injury (muscles that cross multiple joints or have complex architecture). These muscles have a strain threshold for both passive and active injury. Strain injury is not the result of muscle contraction alone, rather, strains are the result of excessive stretch or stretch while the muscle is being activated. When the muscle tears, the damage is localized very near the muscle-tendon junction. After injury, the muscle is weaker and at risk for further injury. The force output of the muscle returns over the following days as the muscle undertakes a predictable progression toward tissue healing. Current imaging studies have been used clinically to document the site of injury to the muscle-tendon junction. The commonly injured muscles have been described and include the hamstring, the rectus femoris, gastrocnemius, and adductor longus muscles. Injuries inconsistent with involvement of a single muscle-tendon junction proved to be at tendinous origins rather than within the muscle belly. Important information has also been provided regarding injuries with poor prognosis, which are potentially repairable surgically, including injuries to the rectus femoris muscle, the hamstring origin, and the abdominal wall. Data important to the management of common muscle injuries have been published. The risks of reinjury have been documented. The early efficacy and potential for long-term risks of nonsteroidal antiinflammatory agents have been shown. New data can also be applied to the field

  6. Longitudinal misalignment based strain sensor

    OpenAIRE

    Andrews, Jeffrey Pratt

    1989-01-01

    A practical fiber optic strain sensor has been developed to measure strains in the range of 0.0 to 2.0 percent strain with a resolution ranging between 10 and 100 microstrain depending on sensor design choices. This intensity based sensor measures strain by monitoring strain induced longitudinal misalignment in a novel fiber interconnection. This interconnection is created by aligning fibers within a segment of hollow core fiber. Related splice loss mechanisms are investigated ...

  7. Asymptomatic bacteriuria Escherichia coli strains

    DEFF Research Database (Denmark)

    Hancock, Viktoria; Nielsen, E.M.; Klemm, Per

    2006-01-01

    to uropathogenic E. coli (UPEC) that cause symptomatic UTI, very little is known about the mechanisms by which these strains colonize the urinary tract. Here, we have investigated the growth characteristics in human urine as well as adhesin repertoire of nine ABU strains; the ability of ABU strains to compete...... against the UPEC strain CFT073 was also studied. The different ABU strains displayed a wide variety of the measured characteristics. Half of the ABU strains displayed functional type 1 fimbriae while only one expressed functional P fimbriae. A good correlation between the growth rate of a particular...

  8. Strains in General Relativity

    CERN Document Server

    Bini, Donato; Geralico, Andrea

    2014-01-01

    The definition of relative accelerations and strains among a set of comoving particles is studied in connection with the geometric properties of the frame adapted to a "fiducial observer." We find that a relativistically complete and correct definition of strains must take into account the transport law of the chosen spatial triad along the observer's congruence. We use special congruences of (accelerated) test particles in some familiar spacetimes to elucidate such a point. The celebrated idea of Szekeres' compass of inertia, arising when studying geodesic deviation among a set of free-falling particles, is here generalized to the case of accelerated particles. In doing so we have naturally contributed to the theory of relativistic gravity gradiometer. Moreover, our analysis was made in an observer-dependent form, a fact that would be very useful when thinking about general relativistic tests on space stations orbiting compact objects like black holes and also in other interesting gravitational situations.

  9. Strains in general relativity

    International Nuclear Information System (INIS)

    The definition of relative accelerations and strains among a set of comoving particles is studied in connection with the geometric properties of the frame adapted to a 'fiducial observer'. We find that a relativistically complete and correct definition of strains must take into account the transport law of the chosen spatial triad along the observer's congruence. We use special congruences of (accelerated) test particles in some familiar spacetimes to elucidate such a point. The celebrated idea of Szekeres' compass of inertia, arising when studying geodesic deviation among a set of free-falling particles, is here generalized to the case of accelerated particles. In doing so we have naturally contributed to the theory of relativistic gravity gradiometer. Moreover, our analysis was made in an observer-dependent form, a fact that would be very useful when thinking about general relativistic tests on space stations orbiting compact objects like black holes and also in other interesting gravitational situations

  10. MEMS Resonant Strain Sensor Integration

    OpenAIRE

    Myers, David Richard

    2010-01-01

    Despite commercial availability since the 1950's, silicon strain sensors have not experienced the same success as other microdevices, such as accelerometers, pressure sensors, and inkjet heads. Strain sensors measure mechanical deformation and could be used in many structural components, improving safety, controls, and manufacturing tolerances. This thesis examines major strain sensing techniques and highlights both advantages and disadvantages of each. MEMS resonant strain gauges are iden...

  11. Development of reversible strain gage

    International Nuclear Information System (INIS)

    A high-temperature strain gage which can be peeled after taking required apparent strain measurements in a furnace and can be attached reverse-side-up at the point of interest on a test structure was developed. Using the ''reversible'' strain gage with selected room-temperature curing type polyester adhesive, one can expect to measure thermal strain accurately, especially for on large structures, at the first test in temperature up to 250 deg C. The repeatability of apparent strains for about 100 reversible gages was within 50 microstrains of difference at 250 deg C (within 30 microstrains of difference for 80 % of the test gages). (author)

  12. [Echinococcus and strain concepts].

    Science.gov (United States)

    Utük, Armağan Erdem; Simsek, Sami

    2008-01-01

    Hydatid disease (echinococcosis) is one of the most important parasitic zoonoses and remains a public health and economic problem all over the world. Echinococcus granulosus includes a number of genetic variants and, up to date, analyses of mitochondrial DNA sequences have identified ten distinct genetic types (genotypes G1-10). This categorization follows closely the pattern of strain variation emerging based on biological characteristics. The extensive variation in E. granulosus may influence life-cycle patterns, host specificity, development rate, antigenicity, transmission dynamics, sensitivity to chemotherapeutic agents, and pathology. In this review, the recent genetic characterizations of Echinococcus genus have been summarized. PMID:18351549

  13. Reconstruction of axisymmetric strain distributions via neutron strain tomography

    International Nuclear Information System (INIS)

    Predicting the behaviour of structural components under a particular set of loading conditions requires knowledge of the residual elastic strain distribution throughout the bulk of these components. Characterising the 3D strain state at any particular point involves the measurement of six independent components which make up the second order strain tensor. Mapping the complete strain distribution throughout large volumes thus presents significant practical challenges. One possible solution to this problem is to reconstruct the 3D variation of strain components using tomographic techniques. The basic principle underpinning this idea is that the multi-component strain tensor can be reconstructed from a redundant set of lower order projection data. Here we demonstrate this fundamental concept for two samples: a shrink fit ‘ring-and-plug’ sample, and a spray-quenched circular cylinder, both possessing axially symmetric internal strain distribution. We present and contrast different approaches to the strain tomography problem. The methods described here can also be readily applied to high-energy X-ray diffraction measurements and represent an important step toward developing the tomographic reconstruction framework for strain tensor distributions of arbitrary complexity. The major benefit of neutron strain tomography is that the incident beam flux is utilised more fully, greatly reducing the data collection times. Using micro-channel plate (MCP) neutron detectors, a spatial resolution of the order of 0.1 mm can be achieved .

  14. Echocardiographic assessment of myocardial strain.

    Science.gov (United States)

    Gorcsan, John; Tanaka, Hidekazu

    2011-09-27

    Echocardiographic strain imaging, also known as deformation imaging, has been developed as a means to objectively quantify regional myocardial function. First introduced as post-processing of tissue Doppler imaging velocity converted to strain and strain rate, strain imaging has more recently also been derived from digital speckle tracking analysis. Strain imaging has been used to gain greater understanding into the pathophysiology of cardiac ischemia and infarction, primary diseases of the myocardium, and the effects of valvular disease on myocardial function, and to advance our understanding of diastolic function. Strain imaging has also been used to quantify abnormalities in the timing of mechanical activation for heart failure patients undergoing cardiac resynchronization pacing therapy. Further advances, such as 3-dimensional speckle tracking strain imaging, have emerged to provide even greater insight. Strain imaging has become established as a robust research tool and has great potential to play many roles in routine clinical practice to advance the care of the cardiovascular patient. This perspective reviews the physiology of myocardial strain, the technical features of strain imaging using tissue Doppler imaging and speckle tracking, their strengths and weaknesses, and the state-of-the-art present and potential future clinical applications.

  15. Evaluation of Strain Hardening Parameters

    Institute of Scientific and Technical Information of China (English)

    DING Zong-hai; Pavel Huml; YANG Wei

    2004-01-01

    The plane-strain compression test for three kinds of materials was carried out in a temperature range between room temperature and 400 ℃. The σ - ε curves and strain-hardening rate at different temperatures were simulated and a reasonable fit to the experimental data was obtained. A modified model created by data inference and computer simulation was developed to describe the strain hardening at a large deformation, and the predicted strain hardening are in a good agreement with that observed in a large range of stress. The influences of different parameters on strain hardening behaviour under large deformation were analysed. The temperature increase within the test temperatures for stainless steel 18/8 Ti results in dropping of flow stress and strain-hardening rate. For favourable γ-fibre texture to obtain high r, the cold rolling was applied at large reduction. In the experimental procedure, the X-ray diffraction test was carried out to compare the strain hardening and microstructure under large deformation for a bcc steel (low carbon steel SS-1142). The results indicate that the high strain-hardening rate possibly occurs when the primary slip plane {110} is parallel to the rolling plane and the strain-hardening rate decreases when lots of {110} plane rotate out from the orientation {110}∥RP.

  16. Hydrogen production from microbial strains

    Science.gov (United States)

    Harwood, Caroline S; Rey, Federico E

    2012-09-18

    The present invention is directed to a method of screening microbe strains capable of generating hydrogen. This method involves inoculating one or more microbes in a sample containing cell culture medium to form an inoculated culture medium. The inoculated culture medium is then incubated under hydrogen producing conditions. Once incubating causes the inoculated culture medium to produce hydrogen, microbes in the culture medium are identified as candidate microbe strains capable of generating hydrogen. Methods of producing hydrogen using one or more of the microbial strains identified as well as the hydrogen producing strains themselves are also disclosed.

  17. 树鼩粪便细菌分离培养与鉴定%Isolation, culture and identification of bacterial strains from tree shrews feces

    Institute of Scientific and Technical Information of China (English)

    刘丽君; 余柄廷; 胡凝珠; 孙晓梅; 王玮; 孙静; 胡云章; 李建芳

    2015-01-01

    Objective Study the fecal flora diversity of the tree shrew , to provide a basis data of fecal bacteria of feeding the tree shrew .Methods Ten tree shrews were used in this study .The Stools of the animals were respectively cultured with oxygen and without oxygen to isolate the bacterial .Then the PCR-amplified 16S rRNA of the bacterial was sequenced and analyzed .Results 25 bacterial strains belonging to ten bacterial species were isolated by anaerobic incubation , and 25 bacterial strains belonging to twelve bacterial species were isolated by aerobic incubation .Proteus vulgaris, Enterococcus faecalis, Escherichia fergusonii, Enterococcus faecium, Shigella flexneri, Shigella sonnei, Staphylococcus aureus , Aeromonas salmonicida subsp .masoucida , Rahnella aquatilis , Exiguobacterium aquaticum , Raoultella terrigena , and Escherichia coli were identified in this study .Conclusions There is a fecal flora diversity of the tree shrew, and the Proteus vulgaris , Escherichia fergusonii and Enterococcus faecium may be the major parasitic flora .%目的:了解人工饲养树鼩粪便菌群多样性,为树鼩的正常饲养繁殖和微生物质量控制标准化提供依据。方法随机采集10份树鼩粪便样品,利用有氧及厌氧培养基进行细菌分离培养,提取细菌基因组DNA后PCR扩增16SrRNA基因并测序鉴定。结果本实验从树鼩粪便样品中,经有氧培养分离鉴定出25株、12种细菌,经厌氧培养分离鉴定出25株、10种细菌,包括变形杆菌属、肠球菌属、埃希菌属、志贺菌属、葡萄球菌属、气单胞菌属、拉恩氏菌属、拉乌尔菌属、微小杆菌属、链球菌属、明串珠菌属。结论树鼩肠道好氧菌及厌氧菌具有丰富的种属多样性,普通变形杆菌群、费格森埃希菌群和屎肠球菌群可能是树鼩肠道的主要寄生菌群。

  18. Tissue Velocity, Strain und Strain Rate bei Hunden mit Mitralklappenendokardiose

    OpenAIRE

    Javornik, Ana

    2007-01-01

    In der vorliegenden Arbeit „Tissue Velocity, Strain und Strain Rate bei Hunden mit Mitralklappenendokardiose“ wurden erstmals die Geschwindigkeits- und Verformungsparameter zur Evaluierung von Hunden mit Mitralklappenendokardiose angewendet. Diese erweisen sich als neue und viel versprechende Möglichkeiten zur Quantifizierung der regionalen Myokardfunktion. Die myokardialen Funktionsparameter finden in der Humanmedizin weit verbreitete Anwendung und auch in der Tiermedizin erlangen sie zunehm...

  19. Will the swine strain crowd out the seasonal influenza strain?

    CERN Document Server

    Schinazi, Rinaldo B

    2010-01-01

    We use spatial and non spatial models to argue that competition alone may explain why two influenza strains do not usually coexist. The more virulent strain is likely to crowd out the less virulent one. This can be seen as a consequence of the Exclusion Principle of Ecology. We exhibit, however, a spatial model for which coexistence is possible.

  20. Strain correction in interleaved strain-encoded (SENC) cardiac MR

    Science.gov (United States)

    Motaal, Abdallah G.; Osman, Nael F.

    2010-03-01

    The strain encoding (SENC) technique directly encodes regional strain of the heart into the acquired MR images and produces two images with two different tunings so that longitudinal strain, on the short-axis view, or circumferential strain on the long-axis view, are measured. Interleaving acquisition is used to shorten the acquisition time of the two tuned images by 50%, but it suffers from errors in the strain calculations due to inter-tunings motion of the heart. In this work, we propose a method to correct for the inter-tunings motion by estimating the motion-induced shift in the spatial frequency of the encoding pattern, which depends on the strain rate. Numerical data was generated to test the proposed method and real images of human subjects were used for validation. The proposed method corrected the measured strain values so they became nearly identical to the original ones. The results show an improvement in strain calculations so as to relax the imaging constraints on spatial and temporal resolutions and improve image quality.

  1. Biomechanical strain of goldsmiths.

    Science.gov (United States)

    Cândido, Paula Emanuela Fernandes; Teixeira, Juliana Vieira Schmidt; Moro, Antônio Renato Pereira; Gontijo, Leila Amaral

    2012-01-01

    The work of the goldsmiths consists in the manufacture of jewelry. The piece, be it an earring, bracelet or necklace, is hand-assembled. This task requires precision, skill, kindness and patience. In this work, we make use of tools such as cuticle clippers and rounded tip, beads or precious stones and also pieces of metal. This type of activity requires a biomechanical stress of hands and wrists. In order to quantify the biomechanical stress, we performed a case study to measure the movements performed by an assembly of pieces of jewelry. As method for research, filming was done during assembly of parts to a paste, using a Nikon digital camera, for 1 (one) hour. The film was edited by Kinovea software, and the task was divided into cycles, each cycle corresponds to a complete object. In one cycle, there are four two movements of supination and pronation movements of the forearm. The cycle lasts approximately sixteen seconds, totaling 1800 cycles in eight hours. Despite the effort required of the wrists, the activity shows no complaints from the employees, but this fact does not mischaracterizes the ability of employees to acquire repetitive strain injuries and work-related musculoskeletal disorders. PMID:22317096

  2. What Are Sprains and Strains?

    Science.gov (United States)

    ... and Strains Find a Clinical Trial Journal Articles Sprains and Strains PDF Version Size: 119 KB Audio Version Time: 07: ... Twist a knee. Where Do Sprains Usually Occur? Sprains happen most often in the ankle. Sometimes when people fall and land on their ...

  3. Adductor muscle strains in sport.

    Science.gov (United States)

    Nicholas, Stephen J; Tyler, Timothy F

    2002-01-01

    An in-season adductor muscle strain may be debilitating for the athlete. Furthermore, an adductor strain that is treated improperly could become chronic and career threatening. Any one of the six muscles of the adductor group could be involved. The degree of injury can range from a minor strain (Grade I), where minimal playing time is lost, to a severe strain (Grade III) in which there is complete loss of muscle function. Ice hockey and soccer players seem particularly susceptible to adductor muscle strains. In professional ice hockey players throughout the world, approximately 10% of all injuries are groin strains. These injuries, which have been linked to hip muscle weakness, previous injuries to that area, preseason practice sessions and level of experience, may be preventable if such risk factors can be addressed before each season. Hip-strengthening exercises were shown to be an effective method of reducing the incidence of adductor strains in one closely followed National Hockey League ice hockey team. Despite the identification of risk factors and strengthening intervention for ice hockey players, adductor strains continue to occur throughout sport. Clinicians feel an active training programme, along with completely restoring the strength of the adductor muscle group, is the key to successful rehabilitation. Surgical intervention is available if nonoperative treatment fails for 6 months or longer. Adductor release and tenotomy was reported to have limited success in athletes. PMID:11929360

  4. Strain measurements at railway wheels

    International Nuclear Information System (INIS)

    The development of the radial strain component in railway wheels was investigated by neutron diffraction. In the as manufactured state four railway wheels were investigated. In all four wheels no significant strains were found. After 18,400 km usage first strain gradients close to the outer surface of the wheels were detected. In axial middle ranges the changes in strain are weak. After an usage of 61,000 km the gradients becomes strong at the axial outer position between about +700 με close below the tread and -500 με in a depth of 12.5 mm below the tread. At axial middle positions also strain gradients are formed. The end of live state (510,000 km) differs only slightly from the state measured after a usage of 61,000 km

  5. Pin clad strains in Phenix

    International Nuclear Information System (INIS)

    The Phenix reactor has operated for 4 years in a satisfactory manner. The first 2 sub-assembly loadings contained pins clad in solution treated 316. The principal pin strains are: diametral strain (swelling and irradiation creep), ovality and spiral bending of the pin (interaction of wire and pin cluster and wrapper). A pin cluster irradiated to a dose of 80 dpa F reached a pin diameter strain of 5%. This strain is principally due to swelling (low fission gas pressure). The principal parameters governing the swelling are instantaneous dose, time and temperature for a given type of pin cladding. Other types of steel are or will be irradiated in Phenix. In particular, cold-worked titanium stabilised 316 steel should contribute towards a reduction in the pin clad strains and increase the target burn-up in this reactor. (author)

  6. Genetic diversity of Rhodopirellula strains.

    Science.gov (United States)

    Frank, Carsten S; Klockow, Christine; Richter, Michael; Glöckner, Frank Oliver; Harder, Jens

    2013-10-01

    Rhodopirellula baltica SH1(T) is a marine planctomycete with 7,325 genes in its genome. Ten strains of the genus Rhodopirellula were studied in whole genome microarray experiments to assess the extent of their genetic relatedness to R. baltica SH1(T). DNA of strains which were previously affiliated with the species R. baltica (OTU A) hybridized with 3,645-5,728 genes of the type strain on the microarray. Strains SH398 and 6C (OTU B), representing a closely related species with an average nucleotide identity of 88 %, showed less hybridization signals: 1,816 and 3,302 genes gave a hybridization signal, respectively. Comparative genomics of eight permanent draft genomes revealed the presence of over 4,000 proteins common in R. baltica SH1(T) and strains of OTU A or B. The genus Rhodopirellula is characterized by large genomes, with over 7,000 genes per genome and a core genome of around 3000 genes. Individual Rhodopirellula strains have a large portion of strain-specific genes. PMID:23975513

  7. Magnetostriction strain measurement: heterodyne laser interferometry versus strain gauge technique

    OpenAIRE

    Gorji Ghalamestani, Setareh; Vandevelde, Lieven; J.J. Dirckx, Joris; Melkebeek, Jan

    2013-01-01

    Deformation of the ferromagnetic material, known as magnetostriction, causes vibrations and noise of electrical machines and transformer cores. A setup by using heterodyne laser interferometers has been built to measure the magnetostriction strains as a function of the applied magnetic field. The measurement results on a sample of nonoriented electrical steel are presented in this work. These results are compared with those obtained by using a strain gauge setup. The laser measurements are l...

  8. Low TCR nanocomposite strain gages

    Science.gov (United States)

    Gregory, Otto J. (Inventor); Chen, Ximing (Inventor)

    2012-01-01

    A high temperature thin film strain gage sensor capable of functioning at temperatures above 1400.degree. C. The sensor contains a substrate, a nanocomposite film comprised of an indium tin oxide alloy, zinc oxide doped with alumina or other oxide semiconductor and a refractory metal selected from the group consisting of Pt, Pd, Rh, Ni, W, Ir, NiCrAlY and NiCoCrAlY deposited onto the substrate to form an active strain element. The strain element being responsive to an applied force.

  9. Hypervirulent strains of Clostridium difficile

    OpenAIRE

    Cookson, Barry

    2007-01-01

    North America has seen increasing numbers of hospitalised patients and others in nursing homes and the community, with more severe Clostridium difficile associated diarrhoea. This is also described in Northern Europe and surveillance systems are being developed or improved to monitor the situation. One strain (ribotype O27) is described in detail and, like other emerging strains, is demonstrating increasing antimicrobial resistance, notably to quinolone antibiotics. However, its association w...

  10. Canning Tests on Mushroom Strain

    OpenAIRE

    Gormley, T. R. (Thomas Ronan); MacCanna, C.

    1980-01-01

    Canning tests were carried out on 5 mushroom strains from 2 flushes of 4 separate crops. Particular attention was given to the ratio of whole closed canned mushrooms to that of whole closed canned mushrooms plus canned stems and pieces - i.e. total yield. Factors considered in the tests included grading prior to processing, blanching and retort losses, shrinkage in size and mushroom whiteness. Cream and off-white strains had the highest level of open and misshapen mushrooms prior to processin...

  11. Covalent functionalization of strained graphene

    OpenAIRE

    Boukhvalov, Danil W.; Son, Young-Woo

    2012-01-01

    Enhancement of the chemical activity of graphene is evidenced by first-principles modelling of chemisorption of the hydrogen, fluorine, oxygen and hydroxyl groups on strained graphene. For the case of negative strain or compression, chemisorption of the single hydrogen, fluorine or hydroxyl group is energetically more favourable than those of their pairs on different sublattices. This behaviour stabilizes the magnetism caused by the chemisorption being against its destruction by the pair form...

  12. Roll bonding of strained aluminium

    DEFF Research Database (Denmark)

    Staun, Jakob M.

    2003-01-01

    This report investigates roll bonding of pre-strained (å ~ 4) aluminium sheets to produce high strain material from high purity aluminium (99.996%) and commercial pure aluminium (99.6%). The degree of bonding is investigated by optical microscopy and ultrasonic scanning. Under the right circumsta......This report investigates roll bonding of pre-strained (å ~ 4) aluminium sheets to produce high strain material from high purity aluminium (99.996%) and commercial pure aluminium (99.6%). The degree of bonding is investigated by optical microscopy and ultrasonic scanning. Under the right...... circumstances both materials show good bonding, but the high purity material is excluded because of recrystallisation and the resulting loss of mechanical properties. The effect of cross stacking and roll bonding pre-strained sheets of the commercial purity material is investigated and some dependence...... of the cross rolled volume fraction is found. To further asses this effect, and the anisotropy, it is necessary to acquire knowledge about both texture and microstructure, e.g. by TEM. Roll bonding of pre-strained aluminium is found to be a possible alternative to ARB in the quest for ultra-fine grained...

  13. Genome Sequence of Pseudomonas chlororaphis Strain 189

    Science.gov (United States)

    Town, Jennifer; Audy, Patrice; Boyetchko, Susan M.

    2016-01-01

    Pseudomonas chlororaphis strain 189 is a potent inhibitor of the growth of the potato pathogen Phytophthora infestans. We determined the complete, finished sequence of the 6.8-Mbp genome of this strain, consisting of a single contiguous molecule. Strain 189 is closely related to previously sequenced strains of P. chlororaphis. PMID:27340063

  14. Strain Growth in Containment Vessels

    Institute of Scientific and Technical Information of China (English)

    DONG Q; LI Q M; ZHENG J Y

    2006-01-01

    Strain growth is a phenomenon observed in containment vessels subjected to internal blast loading.The elastic response of the vessel may become larger in a later stage compared to its response during the initial stage.The dynamic responses of infinitely long cylindrical containment vessels subjected to uniformly-distributed internal blast loading are studied using LS-DYNA.The development of bending modes and the interaction between the breathing mode and bending modes are observed.The methodology developed for dynamic elastic buckling analysis is employed to study the strain growth phenomenon in explosion containment vessels.It is shown that the dynamic instable vibration of a containment vessel is the basic mechanism of strain growth.

  15. Thermoelectric properties of strained silicon

    Energy Technology Data Exchange (ETDEWEB)

    Hinsche, Nicki F.; Zahn, Peter [Martin-Luther-Universitaet, Institut fuer Physik, Von-Seckendorff-Platz 1, 06120 Halle/S. (Germany); Mertig, Ingrid [Martin-Luther-Universitaet, Institut fuer Physik, Von-Seckendorff-Platz 1, 06120 Halle/S. (Germany); Max-Planck-Institut fuer Mikrostrukturphysik, Weinberg 2, D-06120 Halle (Germany)

    2011-07-01

    Starting from bulk silicon, we study the change in thermoelectric properties due to symmetry breaking in rolled-up and layered Si which might lead to nanostructured thermoelectrics. Valley splitting in strained Si caused by tetragonal distortion was studied recently with respect to the enhancement of electron mobility. Our results show that the tetragonal distortion has a strong influence on the electronic transport properties. The electronic structure is calculated self consistently within the framework of density functional theory. The transport properties are studied in the diffusive limit applying the Boltzmann theory in relaxation time approximation. In detail, the anisotropy of the electrical conductivity, the thermopower and the resulting powerfactor in the in-plane and off-plane directions are studied in dependence on strain, doping level and temperature. It is shown, that the powerfactor at a given temperature can be enhanced slightly by strain for p-doping, while no enhancement is obtained for n-doping.

  16. Spin transport in graphene superlattice under strain

    Science.gov (United States)

    Sattari, Farhad

    2016-09-01

    In this paper, the spin-dependent transport and the spin polarization properties for graphene superlattice with Rashba spin-orbit interaction (RSOI) in the presence of zigzag and armchair direction strain are studied. It is found that for the zigzag direction strain the angular range of the spin-inversion can be efficiently controlled by the strain strength. In addition, the efficiency of spin-inversion and spin-dependent conductivity decreases by increasing the strain strength. When the armchair direction strain is applied to a monolayer graphene superlattice the spin polarization can be observed and increases by increasing the strain strength, whereas for the zigzag direction strain it is zero.

  17. Myocardial Strain and Strain Rate Imaging: Comparison between Doppler Derived Strain Imaging and Speckle Tracking Echocardiography

    Directory of Open Access Journals (Sweden)

    Anita Sadeghpour

    2013-05-01

    Full Text Available Regional myocardial function has been traditionally assessed by visual estimation (1. Echocardiographic strain imaging which is known as deformation imaging, has been emerged as a quantitative technique to accurately estimate regional myocardial function and contractility. Currently, strain imaging has been regarded as a research tool in the most echocardiography laboratories. However, in recent years, strain imaging has gain momentum in daily clinical practice (2. The following two techniques have dominated the research arena of echocardiography: (1 Doppler based tissue velocity measurements, frequently referred to tissue Doppler or myocardial Doppler, and (2 speckle tracking on the basis of displacement measurements (3. Over the past two decades, Tissue Doppler Imaging (TDI and Doppler –derived strain (S and strain rate (SR imaging were introduced to quantify regional myocardial function. However, Doppler–derived strain variables faced criticisms, with regard to the angle dependency, noise interference, and substantial intraobserver and interobserver variability. The angle dependency is the major weakness of Doppler based methodology; however, it has the advantage of online measurements of velocities and time intervals with excellent temporal resolution, which is essential for the assessment of ischemia (4. Speckle-tracking echocardiography (STE or Non Doppler 2D strain echocardiography is a relatively new, largely angle-independent technique that analyzes motion by tracking natural acoustic reflections and interference patterns within an ultrasonic window. The image-processing algorithm tracks elements with approximately 20 to 40 pixels containing stable patterns and are described as ‘‘speckles’’ or ‘‘fingerprints’’. The speckles seen in grayscale B-mode (2D images are tracked consecutively frame to frame (5, 6. Assessment of 2D strain by STE is a semiautomatic method that requires definition of the myocardium

  18. Photoacoustic spectroscopy of Entamoeba histolytica strains

    Science.gov (United States)

    Acosta-Avalos, D.; Alvarado-Gil, J. J.; Silva, E. F.; Orozco, E.; de Menezes, L. F.; Vargas, H.

    2005-06-01

    Pathogenic and non-pathogenic strains of E. histolytica are studied using photoacoustic spectroscopy. It is shown that the pathogenic strain presents a spectrum similar to that of iron sulfur proteins. The non-pathogenic strain does not show any relevant absorption at the studied wavelength range. The differences observed between the optical absorption spectra of both strains opens the possibility of using photoacoustic spectroscopy as a reliable and simple technique to identify different types of E. histolytica strains.

  19. [Selected properties of Bacteroides fragilis enterotoxigenic strains].

    Science.gov (United States)

    Rokosz, A; Meisel-Mikołajczyk, F

    1995-01-01

    Seven B. fragilis strains were examined. One strain was reference, non-enterotoxigenic, representing serotype E2 according to Beerens et al. (1971). Six strains produced enterotoxin (ETBF). Four of them were isolated from human feces and two of them from swine feces. All strains were investigated morphologically, biochemically (ATB Expression, France) and by means of direct immunofluorescence (Bacteroides--IF test, Poland). Their resistance to chemotherapeutics was tested (ATB Expression, France). The MIC values of clindamycin and metronidazole were determined using E test strips (AB Biodisk, Sweden). Each strain formed capsules. The percentage of encapsulated cells was high (80-100%). Some strains produced thick capsules. Biochemical patterns were similar and typical for B. fragilis rods. One enterotoxigenic strain produced gelatinase and three ETBF strains fermented trehalose. All strains reacted in direct immunofluorescence exclusively with conjugate against serotype E of BFG. Thus, each strain showed antigenic pattern E. Drug susceptibility of all strains was similar. One enterotoxigenic strain was resistant to clindamycin. All strains were susceptible to metronidazole. These studies indicate that on the basis of morphological, biochemical and serological features (IF), enterotoxigenic B. fragilis strains cannot be distinguished from the nonenterotoxigenic one. Also, the correlation between toxigenicity and drug sensitivity of the examined strains is not observed.

  20. Laboratory review of reference strains of Corynebacterium diphtheriae indicates mistyped intermedius strains.

    OpenAIRE

    Coyle, M B; Nowowiejski, D J; Russell, J Q; Groman, N B

    1993-01-01

    All biotyped strains of Corynebacterium diphtheriae from the American Type Culture Collection (ATCC) were compared for morphology and biochemical reactions. Biotypes of all gravis strains and most mitis strains were confirmed, but intermedius strains were found to be misclassified. New lipid-dependent intermedius strains have been deposited with the ATCC.

  1. Trials with a Strain Gauge.

    Science.gov (United States)

    Auty, Geoff

    1996-01-01

    Describes an attempt to match the goals of the practical demonstration of the use of a strain gauge and the technical applications of science and responding to student questions in early trials, while keeping within the level of electronics in advanced physics. (Author/JRH)

  2. Job strain and alcohol intake

    DEFF Research Database (Denmark)

    Heikkilä, Katriina; Nyberg, Solja T; Fransson, Eleonor I;

    2012-01-01

    The relationship between work-related stress and alcohol intake is uncertain. In order to add to the thus far inconsistent evidence from relatively small studies, we conducted individual-participant meta-analyses of the association between work-related stress (operationalised as self-reported job...... strain) and alcohol intake....

  3. A NEW STRAIN OF TRANSMISSIBLE LEUCEMIA IN FOWLS (STRAIN H).

    Science.gov (United States)

    Ellermann, V

    1921-03-31

    1. A new strain of fowl leucosis has been transmitted through twelve generations of fowls. 2. An increase in virulence was observed during its passage. This was shown in a shortening of the interval between inoculation and death. The increase in virulence does not affect the number of successful inoculations, which remains approximately constant in from 20 to 40 per cent of the birds employed. 3. As with former strains, the disease manifests itself in various forms; i.e., myeloid and intravascular lymphoid types. A single lymphatic case was observed. 4. In several intravascular cases a diminution in the hemolytic power of the serum was established. This phenomenon was absent in a number of myeloid cases. 5. Active immunization cannot be produced by means of the subcutaneous injection of virulent material. 6. The finding of previous experiments that the virus is filterable has been confirmed. 7. The inoculation of human leucemic material into fowls gave negative results.

  4. Engineering piezoresistivity using biaxially strained silicon

    DEFF Research Database (Denmark)

    Pedersen, Jesper Goor; Richter, Jacob; Brandbyge, Mads;

    2008-01-01

    We calculate the shear piezocoefficient of p-type silicon with grown-in biaxial strain using a 66 k·p method. We find a significant increase in the value of the shear piezocoefficient for compressive grown-in biaxial strain, while tensile strain decreases the piezocoefficient. The dependence...... of the piezocoefficient on temperature and dopant density is altered qualitatively for strained silicon. In particular, we find that a vanishing temperature coefficient may result for silicon with grown-in biaxial tensile strain. These results suggest that strained silicon may be used to engineer the iezoresistivity...

  5. Plane strain test for metal sheet characterization

    OpenAIRE

    Flores, Paulo; Bonnet, Félix; Habraken, Anne

    2007-01-01

    This article shows the influence of a plane strain test specimen geometry on the measurable strain field and the influence of free edge effects over the stress computation. The experimental strain field distribution is measured over the whole deformable zone of a plane strain test specimen by an optical strain gauge. The chosen material is the DC06 IF steel of 0.8 mm thickness. The stress field is computed for several geometries at different strain levels by a Finite Element (FE) commer...

  6. Monoclonal antibodies to Toxoplasma gondii strain 119 identify recently isolated Danish strains as one group

    DEFF Research Database (Denmark)

    Jensen, L.; Petersen, E.; Henriksen, S.A.;

    1998-01-01

    Four mAb raised against the Danish Toxoplasma gondii strain 119, were selected by screening hybridoma supernatants by indirect immunofluorescence against tachyzoites of the RH strain in order to obtain strain restricted markers. Strain restriction extended beyond discrimination of the 119 and RH...... strains, as demonstrated on a further six T. gondii reference strains [BK and GT1 (group A), NTE and 561 (group B), and NED and C56 (group C)]. The bradyzoite-specific mAb, 4.3, reacted to the GT1, NTE and 561 strains, but not to the BK, NED or C56 strains. The tachyzoite-specific mAb, 4.25, reacted....... gondii strain collection representative for a small geographic area (Denmark) was established within a short time span from a variety of animal species. Using the mAb as typing reagents to this Danish strain collection, all 36 animal and two human strains were identified as having the same reaction...

  7. Strain Monitoring of Flexible Structures

    Science.gov (United States)

    Litteken, Douglas A.

    2017-01-01

    , such as tensile testing, fatigue testing, and shear testing, but common measurement techniques cannot be used on fabric. Measuring strain in a material and during a test is a critical parameter for an engineer to monitor the structure during the test and correlate to an analytical model. The ability to measure strain in fabric structures is a challenge for NASA. Foil strain gauges, for example, are commonplace on metallic structures testing, but are extremely difficult to interface with a fabric substrate. New strain measuring techniques need to be developed for use with fabric structures. This paper investigates options for measuring strain in fabric structures for both ground testing and in-space structural health monitoring. It evaluates current commercially available options and outlines development work underway to build custom measurement solutions for NASA's fabric structures.

  8. EFFECTIVE STRESS AND STRAIN IN FINITE DEFORMATION

    Institute of Scientific and Technical Information of China (English)

    周喆; 秦伶俐; 黄文彬; 王红卫

    2004-01-01

    Whether the concept of effective stress and strain in elastic-plastic theory is still valid under the condition of finite deformation was mainly discussed. The uni-axial compression experiments in plane stress and plane strain states were chosen for study. In the two kinds of stress states, the stress- strain curve described by logarithm strain and rotated Kirchhoff stress matches the experiments data better than the curves defined by other stressstrain description.

  9. Temperature-Compensating Inactive Strain Gauge

    Science.gov (United States)

    Moore, Thomas C., Sr.

    1993-01-01

    Thermal contribution to output of active gauge canceled. High-temperature strain gauges include both active gauge wires sensing strains and inactive gauge wires providing compensation for thermal contributions to gauge readings. Inactive-gauge approach to temperature compensation applicable to commercially available resistance-type strain gauges operating at temperatures up to 700 degrees F and to developmental strain gauges operating at temperatures up to 2,000 degrees F.

  10. Piezoelectric field in strained GaAs.

    Energy Technology Data Exchange (ETDEWEB)

    Chow, Weng Wah; Wieczorek, Sebastian Maciej

    2005-11-01

    This report describes an investigation of the piezoelectric field in strained bulk GaAs. The bound charge distribution is calculated and suitable electrode configurations are proposed for (1) uniaxial and (2) biaxial strain. The screening of the piezoelectric field is studied for different impurity concentrations and sample lengths. Electric current due to the piezoelectric field is calculated for the cases of (1) fixed strain and (2) strain varying in time at a constant rate.

  11. Haemophilus ducreyi Cutaneous Ulcer Strains Are Nearly Identical to Class I Genital Ulcer Strains.

    Directory of Open Access Journals (Sweden)

    Dharanesh Gangaiah

    Full Text Available Although cutaneous ulcers (CU in the tropics is frequently attributed to Treponema pallidum subspecies pertenue, the causative agent of yaws, Haemophilus ducreyi has emerged as a major cause of CU in yaws-endemic regions of the South Pacific islands and Africa. H. ducreyi is generally susceptible to macrolides, but CU strains persist after mass drug administration of azithromycin for yaws or trachoma. H. ducreyi also causes genital ulcers (GU and was thought to be exclusively transmitted by microabrasions that occur during sex. In human volunteers, the GU strain 35000HP does not infect intact skin; wounds are required to initiate infection. These data led to several questions: Are CU strains a new variant of H. ducreyi or did they evolve from GU strains? Do CU strains contain additional genes that could allow them to infect intact skin? Are CU strains susceptible to azithromycin?To address these questions, we performed whole-genome sequencing and antibiotic susceptibility testing of 5 CU strains obtained from Samoa and Vanuatu and 9 archived class I and class II GU strains. Except for single nucleotide polymorphisms, the CU strains were genetically almost identical to the class I strain 35000HP and had no additional genetic content. Phylogenetic analysis showed that class I and class II strains formed two separate clusters and CU strains evolved from class I strains. Class I strains diverged from class II strains ~1.95 million years ago (mya and CU strains diverged from the class I strain 35000HP ~0.18 mya. CU and GU strains evolved under similar selection pressures. Like 35000HP, the CU strains were highly susceptible to antibiotics, including azithromycin.These data suggest that CU strains are derivatives of class I strains that were not recognized until recently. These findings require confirmation by analysis of CU strains from other regions.

  12. Spontaneous abortion and physical strain around implantation

    DEFF Research Database (Denmark)

    Hjøllund, Niels Henrik Ingvar; Jensen, T.K.; Bonde, J.P.;

    2000-01-01

    pregnancy the women recorded physical strain prospectively in a structured diary. Physical strain around the time of implantation was associated with later spontaneous abortion. The adjusted risk ratio for women who reported physical strain higher than average at day 6 to 9 after the estimated date...

  13. Lewis Strain Gauge Laboratory: Status and plans

    International Nuclear Information System (INIS)

    An in-house lab was established for developing, testing, and evaluating high-temperature strain gauges and to aid in in-house applications of high-temperature strain instrumentation. The lab is automated to provide computer control of oven temperatures, imposed strain, and data sampling

  14. On lower order strain gradient plasticity theories

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Hutchinson, J. W.

    2003-01-01

    By way of numerical examples, this paper explores the nature of solutions to a class of strain gradient plasticity theories that employ conventional stresses, equilibrium equations and boundary conditions. Strain gradients come into play in these modified conventional theories only to alter...... the tangent moduli governing increments of stress and strain. It is shown that the modification is far from benign from a mathematical standpoint, changing the qualitative character of solutions and leading to a new type of localization that is at odds with what is expected from a strain gradient theory....... The findings raise questions about the physical acceptability of this class of strain gradient theories....

  15. Transient temperature response of strain gages

    International Nuclear Information System (INIS)

    When an electrical resistance strain gage bonded to a material is subjected to a temperature change, the resistance of the strain gage changes even though the material is free of stress. This temperature-induced resistance change is generally expressed in strain units and is commonly called apparent strain or thermal output. The thermal expansion coefficients and the temperature coefficient of resistance are temperature-dependent quantities and not necessarily linearly related to temperature. For transient temperature conditions, the two temperatures are different. The magnitude and effect of this temperature difference on apparent strain is studied

  16. Strain Engineering of Transition Metal Dichalcogenides

    Science.gov (United States)

    Dadgar, Ali; Pasupathy, Abhay; Herman, Irving; Wang, Dennis; Kang, Kyungnam; Yang, Eui-Hyeok

    The application of strain to materials can cause changes to bandwidth, effective masses, degeneracies and even structural phases. In the case of the transition metal dichalcogenide (TMD) semiconductors, small strain (around 1 percent) is expected to change band gaps and mobilities, while larger strains are expected to cause phase changes from the triangular 2H phase to orthorhombic 1T' phases. We will describe experimental techniques to apply small and large (around 10 percent) strains to one or few layer samples of the TMD semiconductors, and describe the effect of the strain using optical (Raman, photoluminescence) and cryogenic transport techniques.

  17. Spontaneous abortion and physical strain around implantation

    DEFF Research Database (Denmark)

    Hjollund, N H; Jensen, Tina Kold; Bonde, Jens Peter;

    2000-01-01

    Existing studies of physical strain and spontaneous abortion are mainly retrospective or based only on pregnancies that have survived the first trimester. Furthermore, almost all studies have relied on averaged measures of physical strain, which tend to blur an effect if peak values during short...... pregnancy the women recorded physical strain prospectively in a structured diary. Physical strain around the time of implantation was associated with later spontaneous abortion. The adjusted risk ratio for women who reported physical strain higher than average at day 6 to 9 after the estimated date...

  18. Stress-strain properties of railway steel at strain rates of upto 105 per second

    International Nuclear Information System (INIS)

    This paper presents the stress-strain characteristics of railway steel at strain rates of up to 105/s at room temperature determined by a new technique. In determining the results, account has been taken of the strain-rate variation, the total strain and the strain rate history. The effect of friction, material inertia and temperature rise is also assessed and an empirical constitutive equation describing the strain-rate and strain sensitive flow stress for this type of steel is proposed. (orig.)

  19. Comparison between strain values of plates measured by ESPI technique and strain gauge method

    International Nuclear Information System (INIS)

    Comparison between strain values of plates measured by Electronic Speckle Pattern Interferometry(ESPI) method and strain gauge method is discussed. Unlike traditional method, such ax strain gauge and moire method, ESPI method requires no special surface preparations or attachments and can be measured in-plane displacement with non-contacting in real-time. In this study, specimens are loaded in parallel using tensile testing machine. In front of a specimen three strain gauges are bonded with 5 mm gap from edge of a specimen strain values are measured at each strain gauge position and compared. The results by ESPI method agree well with the result by strain gauge method.

  20. Computational strain gradient crystal plasticity

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Kysar, Jeffrey W.

    2014-01-01

    of plane crystal plasticity are studied: pure shear of a single crystal between rigid platens as well as plastic deformation around cylindrical voids in hexagonal close packed and face centered cubic crystals. Effective in-plane constitutive slip parameters for plane strain deformation of specifically...... oriented face centered cubic crystals are developed in terms of the crystallographic slip parameters. The effect on geometrically necessary dislocation structures introduced by plastic deformation is investigated as a function of the ratio of void radius to plasticity length scale....

  1. Strain gauges as intrusion detection sensors

    International Nuclear Information System (INIS)

    Strain gauges have been studied for use as intrusion detection sensors in several applications being investigated at Sandia National Laboratories. Strain gauges are attached to a metal structure to monitor the quiescent strain in the structure. The change in the quiescent strain, when an intruder adds weight to the structure provides the alarm mechanism. The basic theory of force sensors is covered to lay the foundation for this application. In this paper, how this basic theory is applied to security sensors is discussed, and how this class of sensors is applicable to security at Department of Energy facilities is covered. Several applications are described for strain gauges as security sensors. Test results are presented from a six-month test conducted at a Department of Energy facility using the strain gauge to monitor overhead lines crossing a security perimeter. Monitoring these overhead lines with strain gauges is valuable because the cost is much less than the cost to bury the lines

  2. Strain engineering of graphene: a review

    Science.gov (United States)

    Si, Chen; Sun, Zhimei; Liu, Feng

    2016-02-01

    Graphene has intrigued the science community by many unique properties not found in conventional materials. In particular, it is the strongest two-dimensional material ever measured, being able to sustain reversible tensile elastic strain larger than 20%, which yields an interesting possibility to tune the properties of graphene by strain and thus opens a new field called ``straintronics''. In this article, the current progress in the strain engineering of graphene is reviewed. We first summarize the strain effects on the electronic structure and Raman spectra of graphene. We then highlight the electron-phonon coupling greatly enhanced by the biaxial strain and the strong pseudomagnetic field induced by the non-uniform strain with specific distribution. Finally, the potential application of strain-engineering in the self-assembly of foreign atoms on the graphene surface is also discussed. Given the short history of graphene straintronics research, the current progress has been notable, and many further advances in this field are expected.

  3. Generalizing the Fermi velocity of strained graphene from uniform to nonuniform strain

    OpenAIRE

    Oliva-Leyva, M.; Naumis, Gerardo G.

    2014-01-01

    The relevance of the strain-induced Dirac point shift to obtain the appropriate anisotropic Fermi velocity of strained graphene is demonstrated. Then a critical revision of the available effective Dirac Hamiltonians is made by studying in detail the limiting case of a uniform strain. An effective Dirac Hamiltonian for nonuniform strain is thus reported, which takes into account all strain-induced effects: changes in the nearest-neighbor hopping parameters, the reciprocal lattice deformation a...

  4. A Method to Measure Reference Strain in FBG Strain Sensor Interrogation System Involving Actuators

    OpenAIRE

    Rajan, Ginu; Semenova, Yuliya; Wu, Qiang; Farrell, Gerald; Wang, Pengfei

    2007-01-01

    A method for reference strain measurement for FBG strain sensor in the testing stage while applying strain using actuators like piezo translators or micro screw is introduced. Unlike conventional methods of surface mounting, in our method the strain gauge is affixed directly to the optical fibre, which allows it to use with systems where the strain is applied directly using actuators while testing the FBG sensing system. Different bonding techniques were tested and a comparison with the resul...

  5. Application of capsule type strain gage and fiber optic grating strain sensor for measurement of strain under irradiation environment

    International Nuclear Information System (INIS)

    In Japan Atomic Energy Research Institute, in-pile strain measurement techniques have been developing by using JMTR. In order to evaluate the performance of capsule type strain gage and fiber optic grating sensor under irradiation environment, the heat-up tests in electric furnace before irradiation and in-pile tests were performed. As for capsule type strain gage, it is found that gage factor almost did not change and both its electric resistance and strain output decreased by irradiation effect. A correlation was found between the change ratio of the electric resistance of the capsule type strain gage and fast neutron fluence. As for fiber optic grating sensor, it is possible to measure strain under irradiation environment below 1x1023 n/m2 (E>1 MeV) by this sensor, because in-pile temperature characteristic was in agreement with out-of-pile test results. (author)

  6. Modeling competition between yeast strains

    Science.gov (United States)

    de Gee, Maarten; van Mourik, Hilda; de Visser, Arjan; Molenaar, Jaap

    2016-04-01

    We investigate toxin interference competition between S. cerevisiae colonies grown on a solid medium. In vivo experiments show that the outcome of this competition depends strongly on nutrient availability and cell densities. Here we present a new model for S. cerevisiae colonies, calculating the local height and composition of the colonies. The model simulates yeast colonies that show a good fit to experimental data. Simulations of colonies that start out with a homogeneous mixture of toxin producing and toxin sensitive cells can display remarkable pattern formation, depending on the initial ratio of the strains. Simulations in which the toxin producing and toxin sensitive species start at nearby positions clearly show that toxin production is advantageous.

  7. Determining Micromechanical Strain in Nitinol

    Energy Technology Data Exchange (ETDEWEB)

    Strasberg, Matthew; /SLAC

    2006-09-27

    Nitinol is a superelastic alloy made of equal parts nickel and titanium. Due to its unique shape memory properties, nitinol is used to make medical stents, lifesaving devices used to allow blood flow in occluded arteries. Micromechanical models and even nitinol-specific finite element analysis (FEA) software are insufficient for unerringly predicting fatigue and resultant failure. Due to the sensitive nature of its application, a better understanding of nitinol on a granular scale is being pursued through X-ray diffraction techniques at the Stanford Synchrotron Radiation Laboratory (SSRL) at the Stanford Linear Accelerator Center (SLAC). Through analysis of powder diffraction patterns of nitinol under increasing tensile loads, localized strain can be calculated. We compare these results with micromechanical predictions in order to advance nitinol-relevant FEA tools. From this we hope to gain a greater understanding of how nitinol fatigues under multi-axial loads.

  8. Job Strain in Shift and Daytime Workers.

    Science.gov (United States)

    Knutsson; Nilsson

    1997-07-01

    Cross-sectional questionnaire data were used to compare the levels of job strain in shift and daytime workers. Job strain was measured according to Karasek's Demands/Discretion model. Four occupational groups were included: drivers, industrial workers, policemen/watchmen, and cooks. The study subjects were a random sample of 508 daytime workers and 418 shift workers. Job demand did not differentiate between shift and daytime workers, comparing groups broken down by gender and by occupation. The daytime workers reported higher levels of job strain than the shift workers, and women experienced a higher level of job strain than did men. Multiple linear regression analysis showed that only occupational group and gender predicted job strain level. Shiftwork was not significantly associated with job strain in the regression model.

  9. The many shades of prion strain adaptation.

    Science.gov (United States)

    Baskakov, Ilia V

    2014-01-01

    In several recent studies transmissible prion disease was induced in animals by inoculation with recombinant prion protein amyloid fibrils produced in vitro. Serial transmission of amyloid fibrils gave rise to a new class of prion strains of synthetic origin. Gradual transformation of disease phenotypes and PrP(Sc) properties was observed during serial transmission of synthetic prions, a process that resembled the phenomenon of prion strain adaptation. The current article discusses the remarkable parallels between phenomena of prion strain adaptation that accompanies cross-species transmission and the evolution of synthetic prions occurring within the same host. Two alternative mechanisms underlying prion strain adaptation and synthetic strain evolution are discussed. The current article highlights the complexity of the prion transmission barrier and strain adaptation and proposes that the phenomenon of prion adaptation is more common than previously thought.

  10. Effect of strain rate and temperature at high strains on fatigue behavior of SAP alloys

    DEFF Research Database (Denmark)

    Blucher, J.T.; Knudsen, Per; Grant, N.J.

    1968-01-01

    Fatigue behavior of three SAP alloys of two nominal compositions (7 and 13% Al2O3) was studied in terms of strain rate and temperature at high strains; strain rate had no effect on life at 80 F, but had increasingly greater effect with increasing temperature above 500 F; life decreased with decre......Fatigue behavior of three SAP alloys of two nominal compositions (7 and 13% Al2O3) was studied in terms of strain rate and temperature at high strains; strain rate had no effect on life at 80 F, but had increasingly greater effect with increasing temperature above 500 F; life decreased...

  11. Investigation of Electronic Devices for Strain Measurement

    Directory of Open Access Journals (Sweden)

    Ričardas Masiulionis

    2011-08-01

    Full Text Available Importance of strain measuring for safety of buildings is shown. The strain monitoring should be one of the buildings security systems. Often used balanced and non-balanced Wheatstone bridge strain measurement methods are analyzed. The Wheatstone bridge method with feedback is improved. A new method based on small resistance changes by the digital balancing currents is presented. Computer and experimental models of measurement are investigated. The received results confirm theoretical assumptions.Article in Lithuanian

  12. Aggregation and distribution of strains in microparasites.

    OpenAIRE

    Lord, C. C.; Barnard, B.; Day, K; Hargrove, J. W.; McNamara, J J; Paul, R E; Trenholme, K; Woolhouse, M. E.

    1999-01-01

    Recent research has shown that many parasite populations are made up of a number of epidemiologically distinct strains or genotypes. The implications of strain structure or genetic diversity for parasite population dynamics are still uncertain, partly because there is no coherent framework for the interpretation of field data. Here, we present an analysis of four published data sets for vector-borne microparasite infections where strains or genotypes have been distinguished: serotypes of Afri...

  13. Nonlinear strain gradient elastic thin shallow shells

    OpenAIRE

    Lazopoulos, K.A.

    2011-01-01

    Abstract The governing equilibrium equations for strain gradient elastic thin shallow shells are derived, considering non-linear strains and linear constitutive strain gradient elastic relations. Adopting Kirchhoff's theory of thin shallow structures, the equilibrium equations, along with the boundary conditions, are formulated through a variational procedure. It turns out that new terms are introduced, indicating the importance of the cross-section area in bending of thin plates. ...

  14. Diversity among Streptomyces Strains Causing Potato Scab

    OpenAIRE

    Doering-Saad, Christiane; Kämpfer, Peter; Manulis, Shulamit; Kritzman, Giora; Schneider, Jörg; Zakrzewska-Czerwinska, Jolanta; Schrempf, Hildgund; Barash, Isaac

    1992-01-01

    Eighty Streptomyces isolates, including 35 potato scab-inducing strains and 12 reference strains of Streptomyces scabies, were physiologically characterized by a total of 329 miniaturized tests. Overall similarities of all strains were determined by numerical taxonomy, with the unweighted average linkage (UPGMA) algorithm and simple matching (Ssm) and Jaccard (Sj) coefficients used as measures for similarity. Three cluster groups (A to C) were defined at a similarity level of 80.1% (Ssm); the...

  15. Strain rate sensitivity of automotive sheet steels : influence of plastic strain, strain rate, temperature, microstructure, bake hardening and pre-strain

    OpenAIRE

    Larour, Patrick

    2010-01-01

    This experimental work shows the different parameters influencing the strain rate sensitivity behaviour of automotive sheet steel grades in crash conditions. Most investigations have been performed in the strain rate range [0,001-200/s] and temperature range [233-373K] with servohydraulic tensile testing machines. Additional Split-Hopkinson bar testing results up to 1000/s have also been included at room temperature. The focus has been laid on the “apparent” strain rate sensitivity, determine...

  16. Film germanium strain gauges for cryogenic temperatures

    International Nuclear Information System (INIS)

    Strain-measuring characteristics of strain gauges (SG) based on germanium films on gallium arsenide designed for operation in 4-100 K temperature interval and strain range ε∼(±0.3%) are presented. SG are characterized by weak temperature dependences of resistance and strain sensitivity in the temperature range measured. It is shown that in the low-temperature region SG based on heteroepitaxial germanium films on gallium arsenide are no worse than the best domestic and foreign semiconducting and metal SG and are perspective for cryogenic object diagnostics under magnetic field effect

  17. High strain rate damage of Carrara marble

    Science.gov (United States)

    Doan, Mai-Linh; Billi, Andrea

    2011-10-01

    Several cases of rock pulverization have been observed along major active faults in granite and other crystalline rocks. They have been interpreted as due to coseismic pervasive microfracturing. In contrast, little is known about pulverization in carbonates. With the aim of understanding carbonate pulverization, we investigate the high strain rate (c. 100 s-1) behavior of unconfined Carrara marble through a set of experiments with a Split Hopkinson Pressure Bar. Three final states were observed: (1) at low strain, the sample is kept intact, without apparent macrofractures; (2) failure is localized along a few fractures once stress is larger than 100 MPa, corresponding to a strain of 0.65%; (3) above 1.3% strain, the sample is pulverized. Contrary to granite, the transition to pulverization is controlled by strain rather than strain rate. Yet, at low strain rate, a sample from the same marble displayed only a few fractures. This suggests that the experiments were done above the strain rate transition to pulverization. Marble seems easier to pulverize than granite. This creates a paradox: finely pulverized rocks should be prevalent along any high strain zone near faults through carbonates, but this is not what is observed. A few alternatives are proposed to solve this paradox.

  18. Diversity among Streptomyces Strains Causing Potato Scab.

    Science.gov (United States)

    Doering-Saad, C; Kämpfer, P; Manulis, S; Kritzman, G; Schneider, J; Zakrzewska-Czerwinska, J; Schrempf, H; Barash, I

    1992-12-01

    Eighty Streptomyces isolates, including 35 potato scab-inducing strains and 12 reference strains of Streptomyces scabies, were physiologically characterized by a total of 329 miniaturized tests. Overall similarities of all strains were determined by numerical taxonomy, with the unweighted average linkage (UPGMA) algorithm and simple matching (S(sm)) and Jaccard (S(j)) coefficients used as measures for similarity. Three cluster groups (A to C) were defined at a similarity level of 80.1% (S(sm)); these groups contained 14 clusters and 24 unclustered strains defined at a similarity level of 86.5% (S(sm)). Cluster group A contained strains phenotypically related to S. griseus or S. exfoliatus, whereas cluster group B contained strains which were phenotypically related to S. violaceus or S. rochei. The majority of the pathogenic isolates and reference strains were assigned to S. violaceus (57%) and S. griseus (22%). A DNA probe derived from the rRNA operon of S. coelicolor IMET 40271 was used to detect restriction fragment length polymorphisms (RELPs) among 40 pathogenic and nonpathogenic Streptomyces isolates. Southern blots revealed a high degree of diversity among the pathogenic strains tested. No significant correlation between numerical classification and RFLP grouping of Streptomyces strains could be revealed. The results obtained suggest that RFLP data are of minor importance in classification of Streptomyces species and that genes for pathogenicity determinants are spread among different Streptomyces species by mobilizable elements. PMID:16348823

  19. Control of surface wettability via strain engineering

    Science.gov (United States)

    Xiong, Wei; Liu, Jefferson Zhe; Zhang, Zhi-Liang; Zhen, Quan-Shui

    2013-08-01

    Reversible control of surface wettability has wide applications in lab-on-chip systems, tunable optical lenses, and microfluidic tools. Using a graphene sheet as a sample material and molecular dynamic simulations, we demonstrate that strain engineering can serve as an effective way to control the surface wettability. The contact angles θ of water droplets on a graphene vary from 72.5° to 106° under biaxial strains ranging from -10% to 10% that are applied on the graphene layer. For an intrinsic hydrophilic surface (at zero strain), the variation of θ upon the applied strains is more sensitive, i.e., from 0° to 74.8°. Overall the cosines of the contact angles exhibit a linear relation with respect to the strains. In light of the inherent dependence of the contact angle on liquid-solid interfacial energy, we develop an analytic model to show the cos θ as a linear function of the adsorption energy E ads of a single water molecule over the substrate surface. This model agrees with our molecular dynamic results very well. Together with the linear dependence of E ads on biaxial strains, we can thus understand the effect of strains on the surface wettability. Thanks to the ease of reversibly applying mechanical strains in micro/nano-electromechanical systems, we believe that strain engineering can be a promising means to achieve the reversibly control of surface wettability.

  20. Conduction band structure and electron mobility in uniaxially strained Si via externally applied strain in nanomembranes

    Energy Technology Data Exchange (ETDEWEB)

    Chen Feng [Xi' an Jiaotong University, Xi' an, Shaanxi 710049 (China); Euaruksakul, Chanan; Himpsel, F J; Lagally, Max G [University of Wisconsin-Madison, Madison, WI 53706 (United States); Liu Zheng; Liu Feng, E-mail: lagally@engr.wisc.edu [University of Utah, Salt Lake City, UT 84112 (United States)

    2011-08-17

    Strain changes the band structure of semiconductors. We use x-ray absorption spectroscopy to study the change in the density of conduction band (CB) states when silicon is uniaxially strained along the [1 0 0] and [1 1 0] directions. High stress can be applied to silicon nanomembranes, because their thinness allows high levels of strain without fracture. Strain-induced changes in both the sixfold degenerate {Delta} valleys and the eightfold degenerate L valleys are determined quantitatively. The uniaxial deformation potentials of both {Delta} and L valleys are directly extracted using a strain tensor appropriate to the boundary conditions, i.e., confinement in the plane in the direction orthogonal to the straining direction, which correspond to those of strained CMOS in commercial applications. The experimentally determined deformation potentials match the theoretical predictions well. We predict electron mobility enhancement created by strain-induced CB modifications.

  1. A comparison of eastern North American seismic strain-rates to glacial rebound strain-rates

    Science.gov (United States)

    James, Thomas S.; Bent, Allison L.

    1994-01-01

    Glacial rebound strain-rates computed using a simple Laurentide glacial loading model are of the order of 10(exp -9) per year within the region of glaciation and extending several hundred kilometers beyond. The horizontal strain-rates receive approximately equal contributions from horizontal and vertical velocities, a consequence of the spherical geometry adopted for the Earth model. In the eastern United States and southeastern Canada the computed strain-rates are 1-3 orders of magnitude greater than an estimate of the average seismic strain-rate (Anderson, 1986) and approximately 1 order of magnitude greater than predicted erosional strain-rates. The predicted glacial rebound strain-rates are not, in general, oriented in such a way as to augment the observed state of deviatoric stress, possibly explaining why the seismic strain-rates are much smaller than the glacial rebound strain-rates. An exception to this may be seismically active regions in the St. Lawrence valley.

  2. Predicting creep rupture from early strain data

    International Nuclear Information System (INIS)

    To extend creep life modelling from classical rupture modelling, a robust and effective parametric strain model has been developed. The model can reproduce with good accuracy all parts of the creep curve, economically utilising the available rupture models. The resulting combined model can also be used to predict rupture from the available strain data, and to further improve the rupture models. The methodology can utilise unfailed specimen data for life assessment at lower stress levels than what is possible from rupture data alone. Master curves for creep strain and rupture have been produced for oxygen-free phosphorus-doped (OFP) copper with a maximum testing time of 51,000 h. Values of time to specific strain at given stress (40-165 MPa) and temperature (125-350 deg. C) were fitted to the models in the strain range of 0.1-38%. With typical inhomogeneous multi-batch creep data, the combined strain and rupture modelling involves the steps of investigation of the data quality, extraction of elastic and creep strain response, rupture modelling, data set balancing and creep strain modelling. Finally, the master curves for strain and rupture are tested and validated for overall fitting efficiency. With the Wilshire equation as the basis for the rupture model, the strain model applies classical parametric principles with an Arrhenius type of thermal activation and a power law type of stress dependence for the strain rate. The strain model also assumes that the processes of primary and secondary creep can be reasonably correlated. The rupture model represents a clear improvement over previous models in the range of the test data. The creep strain information from interrupted and running tests were assessed together with the rupture data investigating the possibility of rupture model improvement towards lower stress levels by inverse utilisation of the combined rupture based strain model. The developed creep strain model together with the improved rupture model is

  3. The Stress-Strain Condition Estimation of Detail in Crack Tip by Integral Strain Gauges

    Science.gov (United States)

    Syzrantsev, V.; Syzrantseva, K.

    2016-04-01

    The paper considers the task of stress-strain condition calculation of experimental sample in fatigue crack tip on weld boundary at its cyclic deforming. For this task decision authors use the information obtained by original means of cyclic strains measurement: Integral Strain Gauges. The results of carried experimental researches are compared with data of stress-strain condition estimation of detail in crack tip calculated by Finish Element Method.

  4. Calculation of the stress-strain stiffness matrix for given strains in an inelastic material

    Energy Technology Data Exchange (ETDEWEB)

    Friedrich, C.M.

    1978-01-01

    In the implicit method of non-linear analysis of stiffness matrices of finite elements, deflection fields and hence strains are assumed known at one stage of the calculations. A procedure is developed to calculate the stress-strain stiffness matrix from the strains without iteration of the stress components when the material is inelastic.

  5. Strain localization band width evolution by electronic speckle pattern interferometry strain rate measurement

    Energy Technology Data Exchange (ETDEWEB)

    Guelorget, Bruno [Institut Charles Delaunay-LASMIS, Universite de technologie de Troyes, FRE CNRS 2848, 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France)], E-mail: bruno.guelorget@utt.fr; Francois, Manuel; Montay, Guillaume [Institut Charles Delaunay-LASMIS, Universite de technologie de Troyes, FRE CNRS 2848, 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France)

    2009-04-15

    In this paper, electronic speckle pattern interferometry strain rate measurements are used to quantify the width of the strain localization band, which occurs when a sheet specimen is submitted to tension. It is shown that the width of this band decreases with increasing strain. Just before fracture, this measured width is about five times wider than the shear band and the initial sheet thickness.

  6. Job strain and time to pregnancy

    DEFF Research Database (Denmark)

    Hjollund, N H; Jensen, Tina Kold; Bonde, J P;

    1998-01-01

    The association between fertility and job strain defined as high job demands and low job control has not previously been studied. A follow-up study was conducted with prospective collection of information on job strain among women, achievement of pregnancy, and potential confounding variables....

  7. Deformation strain inhomogeneity in columnar grain nickel

    DEFF Research Database (Denmark)

    Wu, G.L.; Godfrey, A.; Juul Jensen, D.;

    2005-01-01

    A method is presented for determination of the local deformation strain of individual grains in the bulk of a columnar grain sample. The method, based on measurement of the change in grain area of each grain, is applied to 12% cold rolled nickel. Large variations are observed in the local strain...

  8. Nanocomposite Strain Gauges Having Small TCRs

    Science.gov (United States)

    Gregory, Otto; Chen, Ximing

    2009-01-01

    Ceramic strain gauges in which the strain-sensitive electrically conductive strips made from nanocomposites of noble metal and indium tin oxide (ITO) are being developed for use in gas turbine engines and other power-generation systems in which gas temperatures can exceed 1,500 F (about 816 C). In general, strain gauges exhibit spurious thermally induced components of response denoted apparent strain. When temperature varies, a strain-gauge material that has a nonzero temperature coefficient of resistance (TCR) exhibits an undesired change in electrical resistance that can be mistaken for the change in resistance caused by a change in strain. It would be desirable to formulate straingauge materials having TCRs as small as possible so as to minimize apparent strain. Most metals exhibit positive TCRs, while most semiconductors, including ITO, exhibit negative TCRs. The present development is based on the idea of using the negative TCR of ITO to counter the positive TCRs of noble metals and of obtaining the benefit of the ability of both ITO and noble metals to endure high temperatures. The noble metal used in this development thus far has been platinum. Combinatorial libraries of many ceramic strain gauges containing nanocomposites of various proportions of ITO and platinum were fabricated by reactive co-sputtering from ITO and platinum targets onto alumina- and zirconia-based substrates mounted at various positions between the targets.

  9. High-Temperature Resistance Strain Gauges

    Science.gov (United States)

    Lei, Jih-Fen

    1994-01-01

    Resistance strain gauges developed for use at high temperatures in demanding applications like testing aircraft engines and structures. Measures static strains at temperatures up to 800 degrees C. Small and highly reproducible. Readings corrected for temperature within small tolerances, provided temperatures measured simultaneously by thermocouples or other suitable devices. Connected in wheatstone bridge.

  10. A Natural Vaccine Candidate Strain Against Cholera

    Institute of Scientific and Technical Information of China (English)

    LIUYAN-QING; QIGUO-MING; 等

    1995-01-01

    El Tor Vibrio cholerae(EVC)strains may be classified into two kinds-epidemigenic(EEVC)strains and non-epidemigenic(NEEVC)strains-based on a phage-biotyping system.A large number of EEVC strains have been screened for toxigenic and putative colonization attributes.One such naturally occurring strain(designated IEM101)has been found which is devoid of genes encoding cholera toxin(CT),accessory cholera enterotoxin(ACE),zonula occludens toxin(ZOT),but possesses RS1 sequences and toixn-coregulated pilus A gene(tcpA)although tcpA is poorly expressed.It expresses type B pili but does not posses type C pili.It is an El Tor Ogawa strain and does not cause fluid accumulation in rabbit ileal loop tests.Active immunization of rabbits with strain IEM101 elicited good protection against challenge with virulent strains of V.cholerae Ol.Oral administration cased no side effects in 15 human volunteers.colonized the gut for four to ten days and elicited good immune responses.

  11. Surfactin production by strains of Bacillus mojavensis

    Science.gov (United States)

    Bacillus mojavensis, RRC101 is an endophytic bacterium patented for control of fungal diseases in maize and other plants. DNA fingerprint analysis of the rep-PCR fragments of 35 B. mojavensis and 4 B. subtilis strains using the Diversilab genotyping system revealed genotypic distinctive strains alon...

  12. Surface instabilities during straining of anisotropic materials

    DEFF Research Database (Denmark)

    Legarth, Brian Nyvang; Richelsen, Ann Bettina

    2006-01-01

    The development of instabilities in traction-free surfaces is investigated numerically using a unit cell model. Full finite strain analyses are conducted using isotropic as well as anisotropic yield criteria and both plane strain tension and compression are considered. In the load range of tension...

  13. Snowball: Strain aware gene assembly of Metagenomes

    NARCIS (Netherlands)

    Gregor, I.; Schoenhuth, A.; McHardy, A.C.

    2015-01-01

    Gene assembly is an important step in functional analysis of shotgun metagenomic data. Nonetheless, strain aware assembly remains a challenging task, as current assembly tools often fail to distinguish among strain variants or require closely related reference genomes of the studied species to be av

  14. Whole genome sequences of four Brucella strains.

    Science.gov (United States)

    Ding, Jiabo; Pan, Yuanlong; Jiang, Hai; Cheng, Junsheng; Liu, Taotao; Qin, Nan; Yang, Yi; Cui, Buyun; Chen, Chen; Liu, Cuihua; Mao, Kairong; Zhu, Baoli

    2011-07-01

    Brucella melitensis and Brucella suis are intracellular pathogens of livestock and humans. Here we report four genome sequences, those of the virulent strain B. melitensis M28-12 and vaccine strains B. melitensis M5 and M111 and B. suis S2, which show different virulences and pathogenicities, which will help to design a more effective brucellosis vaccine. PMID:21602346

  15. On fracture in finite strain gradient plasticity

    DEFF Research Database (Denmark)

    Martínez Pañeda, Emilio; Niordson, Christian Frithiof

    2016-01-01

    In this work a general framework for damage and fracture assessment including the effect of strain gradients is provided. Both mechanism-based and phenomenological strain gradient plasticity (SGP) theories are implemented numerically using finite deformation theory and crack tip fields are...... investigated. Differences and similarities between the two approaches within continuum SGP modeling are highlighted and discussed. Local strain hardening promoted by geometrically necessary dislocations (GNDs) in the vicinity of the crack leads to much higher stresses, relative to classical plasticity...... predictions. These differences increase significantly when large strains are taken into account, as a consequence of the contribution of strain gradients to the work hardening of the material. The magnitude of stress elevation at the crack tip and the distance ahead of the crack where GNDs significantly alter...

  16. Dark field electron holography for strain measurement

    Energy Technology Data Exchange (ETDEWEB)

    Beche, A., E-mail: armand.beche@fei.com [CEA-Grenoble, INAC/SP2M/LEMMA, F-38054 Grenoble (France); Rouviere, J.L. [CEA-Grenoble, INAC/SP2M/LEMMA, F-38054 Grenoble (France); Barnes, J.P.; Cooper, D. [CEA-LETI, Minatec Campus, F-38054 Grenoble (France)

    2011-02-15

    Dark field electron holography is a new TEM-based technique for measuring strain with nanometer scale resolution. Here we present the procedure to align a transmission electron microscope and obtain dark field holograms as well as the theoretical background necessary to reconstruct strain maps from holograms. A series of experimental parameters such as biprism voltage, sample thickness, exposure time, tilt angle and choice of diffracted beam are then investigated on a silicon-germanium layer epitaxially embedded in a silicon matrix in order to obtain optimal dark field holograms over a large field of view with good spatial resolution and strain sensitivity. -- Research Highlights: {yields} Step by step explanation of the dark field electron holography technique. {yields} Presentation of the theoretical equations to obtain quantitative strain map. {yields} Description of experimental parameters influencing dark field holography results. {yields} Quantitative strain measurement on a SiGe layer embedded in a silicon matrix.

  17. Review of graphene-based strain sensors

    Institute of Scientific and Technical Information of China (English)

    Zhao Jing; Zhang Guang-Yu; Shi Dong-Xia

    2013-01-01

    In this paper,we review various types of graphene-based strain sensors.Graphene is a monolayer of carbon atoms,which exhibits prominent electrical and mechanical properties and can be a good candidate in compact strain sensor applications.However,a perfect graphene is robust and has a low piezoresistive sensitivity.So scientists have been driven to increase the sensitivity using different kinds of methods since the first graphene-based strain sensor was reported.We give a comprehensive review of graphene-based strain sensors with different structures and mechanisms.It is obvious that graphene offers some advantages and has potential for the strain sensor application in the near future.

  18. Irreducible decomposition of strain gradient tensor in isotropic strain gradient elasticity

    CERN Document Server

    Lazar, Markus

    2016-01-01

    In isotropic strain gradient elasticity, we decompose the strain gradient tensor into its irreducible pieces under the n-dimensional orthogonal group O(n). Using the Young tableau method for traceless tensors, four irreducible pieces (n>2), which are canonical, are obtained. In three dimensions, the strain gradient tensor can be decomposed into four irreducible pieces with 7+5+3+3 independent components whereas in two dimensions, the strain gradient tensor can be decomposed into three irreducible pieces with 2+2+2 independent components. The knowledge of these irreducible pieces is extremely useful when setting up constitutive relations and strain energy.

  19. Strain relaxation in nano-patterned strained-Si/SiGe heterostructure on insulator

    International Nuclear Information System (INIS)

    In order to evaluate the strain stability, arrays of strained Si/SiGe nano-stripes and nano-pillars were fabricated by Electron-Beam Lithography (EBL) and Reactive-Ion Etching (RIE). The strain relaxation in the patterned strained Si on SiGe-on-insulator (SGOI) was investigated by high-resolution UV micro-Raman spectroscopy. The Raman measurements before and after patterning indicate that most of the strain in the top strained Si is maintained until scaling down to 300 nm, and relaxation of <15% is observed in pillars with a dimension of 150 nm x 150 nm. In the nano-patterned heterostructure strained Si/SiGe, the observed relaxation is small, which is mainly attributed to the fully relaxed and dislocation-free SiGe virtual substrate fabricated by modified Ge condensation.

  20. Thermoresistance in radioresistant strains of 'Drosophila nebulosa'

    International Nuclear Information System (INIS)

    The detection of thermoresistance in radioresistant strains of 'D. nebulosa' is described, as well as some conclusions on the genetic nature of these differences are presented. The strains used in this experiment were MF 204, from 'Morro de Ferro', in Pocos de Caldas (MG) (one of the biggest radioactive anomalies in the world) whose radioresistance is due to its additive genetic components (Kratz, 1973 and 1975); 85(87) R, an induced radioresistant strain; and MF K a control 'pooled' strain obtained near 'Morro do Ferro'. Survival tests, 72 hours after temperature shocks, performed in the interval of 360C to 390C showed a decreasing gradient of thermoresistance with the following regression coefficients: MF 204 b=-5,4; 85(87)R b=-7,2 and MF K b=-7,9. Bifactorial analysis (strains and sexes) performed at 380C and 390C confirmed differences among strains (P<01 and P<0,5, respectively) suggesting a poligenic control of the thermoresistance. Consitent and verified relations among strains, being simultaneously resistant to different kinds of mutagenic factors, are considered evidence of the existence of general mechanisms in mutagenic control. Therefore, the results, together with results of Tsukamoto, Ogaki and Kikkawa 1957, Ogaki 1962 and Nakashima-Tanaka 1966, Parsons 1969, add to the hypotheses of the existence of general mechanisms in mutagenic control

  1. Strain mapping analysis of textile composites

    Science.gov (United States)

    Ivanov, Dmitry; Ivanov, Sergey; Lomov, Stepan; Verpoest, Ignaas

    2009-03-01

    The focus of the work is meso-scale analysis (scale level of the fabric unit cell) of textile composite deformation and failure. The surface strain measurement is used for: (1) experimental investigation, which includes study of strain distribution at various stages of deformation, plasticity detection, damage initiation; (2) numerical validation of the correspondent finite element (FE) models. Two examples are considered: carbon-epoxy triaxial-braided and glass polypropylene-woven composite. The surface strain measurement (by digital image correlation technique) accompanies the tensile tests, aiming at: (1) elastic anisotropic constants characterisation, (2) study of non-linear material behaviour (for the thermoplastic composite), (3) control of homogeneity of the macro-strain distribution, and (4) analysis of damage initiation in brittle composites. Validation of meso-FE models by strain measurements encounters difficulties arising from (1) resolution of the strain measurements, (2) irregularities of the initial structure such as random layer nesting, ply interaction, and deviation of yarns from their theoretical position, which affects the measured strain fields. The paper discusses these difficulties and demonstrates a qualitative agreement with the FE analysis of idealised composite configurations.

  2. Piezoelectric strain sensor/actuator rosettes

    International Nuclear Information System (INIS)

    In-plane anisotropy in the linear piezoelectric constitutive law for [011]c cut and poled PMN–0.29PT is demonstrated to enable its use as a sensor/actuator rosette. The equations for a 0°/45°/90° rosette are developed using the conditions of coupling between the in-plane strain of the crystal and a substrate, and zero out-of-plane stress on the crystal (plane stress conditions in the crystals). The crystals are bonded to a substrate aluminum plate that is instrumented with strain gages next to the crystals. The plate is subjected to bending about different axes and the resulting electric displacement change of the crystals is monitored. The strain components calculated using the change of electric displacement are compared with the strain components measured using strain gages. This sensor/actuator rosette approach is demonstrated to enable both sensing principal strain components and actuating principal strains in an electronically controllable direction. (fast track communication)

  3. PHYLOGENETIC STUDY OF SOME STRAINS OF DUNALIELLA

    Directory of Open Access Journals (Sweden)

    Duc Tran

    2013-01-01

    Full Text Available Dunaliella strains were isolated from a key site for salt production in Vietnam (Vinh Hao, Binh Thuan province. The strains were identified based on Internal Transcribed Spacer (ITS markers. The phylogenetic tree revealed these strains belong to the clades of Dunaliella salina and Dunaliella viridis. Results of this study confirm the ubiquitous nature of Dunaliella and suggest that strains of Dunaliella salina might be acquired locally worldwide for the production of beta-carotene. The identification of these species infers the presence of other Dunaliella species (Dunaliella tertiolecta, Dunaliella primolecta, Dunaliella parva, but further investigation would be required to confirm their presence in Vietnam. We anticipate the physiological and biochemical characteristics of these local species will be compared with imported strains in a future effort. This will facilitate selection of strains with the best potential for exploitation in the food, aquaculture and biofuel industries. The Dunaliella strains isolated and identified in this study are maintained at the Laboratory of Algal Biotechnology, International University and will be made available for research and educational institutions.

  4. Heterogeneity of inelastic strain during creep of Carrara marble: Microscale strain measurement technique

    Science.gov (United States)

    Quintanilla-Terminel, Alejandra; Evans, Brian

    2016-08-01

    We combined the split cylinder technique with microfabrication technology to observe strain heterogeneities that were produced during high-pressure transient creep of Carrara marble. Samples were patterned with a custom-designed grid of markers spaced 10 µm apart and containing an embedded coordinate system. The microscale strain measurement (MSSM) technique described here allowed us to analyze the local strain distribution with unprecedented detail over large regions. The description of the strain field is a function of the area over which strain is being computed. The scale at which the strain field can be considered homogeneous can provide insight into the deformation processes taking place. At 400-500°C, when twinning production is prolific, we observe highly strained bands that span several grains. One possible cause for the multigrain bands is the need to relieve strain incompatibilities that result when twins impinge on neighboring grains. At 600-700°C, the strain fields are still quite heterogeneous, and local strain varies substantially within grains and near grain boundaries, but the multigrain slip bands are not present. Deformation is concentrated in much smaller areas within grains and along some grain boundaries. The disappearance of the multigrain slip bands occurs when the deformation conditions allow additional slip systems to be activated. At 600°C, when the total strain is varied from 0.11 to 0.36, the spatial scale of the heterogeneity does not vary, but there are increases in the standard deviation of the distribution of local strains normalized by the total strain; thus, we conclude that the microstructure does not achieve a steady state in this strain interval.

  5. On lower order strain gradient plasticity theories

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Hutchinson, J. W.

    2002-01-01

    By way of numerical examples, this paper explores the nature of solutions to a class of strain gradient plasticity theories that employ conventional stresses, equilibrium equations and boundary conditions. Strain gradients come into play in these modified conventional theories only to alter...... the tangential moduli governing increments of stress and strain. It is shown that the modification is far from benign from a mathematical standpoint, changing the qualitative character of solutions and leading to a new type of localization that appears to be unphysical....

  6. Revisiting the gauge fields of strained graphene

    OpenAIRE

    Iorio, Alfredo; Pais, Pablo(Centro de Estudios Científicos (CECS), Casilla, 1469 , Valdivia, Chile)

    2015-01-01

    We show that, when graphene is only subject to strain, the spin connection gauge field that arises plays no measurable role, but when intrinsic curvature is present and strain is small, spin connection dictates most the physics. We do so by showing that the Weyl field associated with strain is a pure gauge field and no constraint on the $(2+1)$-dimensional spacetime appears. On the other hand, for constant intrinsic curvature that also gives a pure-gauge Weyl field, we find a classical manife...

  7. STRAIN ANALYSIS OF LATERAL EXTRUSION PROCESS

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    The strain distribution of equal-cross section lateral extrusion(ECSLE) has been simulated by finite element method. Considering the effect of friction and the width of sample, the simulation results are very close to the reality. The simulated results showed that, around the corner of die, the strain is distributed by sharp layers, and the gradient of the layers is very large, which means that the deformation is just plane shear deformation; the larger the width of sample or the smaller the friction, the more uniform the strain distribution is.

  8. Construction of Killer Wine Yeast Strain

    OpenAIRE

    Seki, Tetsuji; Choi, Eon-Ho; Ryu, Dewey

    1985-01-01

    A double-stranded RNA plasmid which confers the superkiller phenotype was transferred into a wine yeast (Montrachet strain 522) and its leucine-requiring derivative (strain 694) by cytoduction, using the protoplast fusion technique. The killer wine yeast constructed completely suppressed the growth of killer-sensitive strains of Saccharomyces cerevisiae in yeast extract-peptone-glucose medium at pH 4.5, whereas the killer effect was somewhat decreased at pH 3.5. The wine yeast harboring the k...

  9. Semiconductor strain metrology principles and applications

    CERN Document Server

    Wong, Terence KS

    2012-01-01

    This book surveys the major and newly developed techniques for semiconductor strain metrology. Semiconductor strain metrology has emerged in recent years as a topic of great interest to researchers involved in thin film and nanoscale device characterization. This e-book employs a tutorial approach to explain the principles and applications of each technique specifically tailored for graduate students and postdoctoral researchers. Selected topics include optical, electron beam, ion beam and synchrotron x-ray techniques. Unlike earlier references, this e-book specifically discusses strain metrol

  10. Stability of germanene under tensile strain

    KAUST Repository

    Kaloni, Thaneshwor P.

    2013-09-01

    The stability of germanene under biaxial tensile strain and the accompanying modifications of the electronic properties are studied by density functional theory. The phonon spectrum shows that up to 16% strain the germanene lattice is stable, where the Dirac cone shifts towards higher energy and hole-doped Dirac states are achieved. The latter is due to weakening of the Ge-Ge bonds and reduction of the s-p hybridization. Our calculated Grüneisen parameter shows a similar dependence on the strain as reported for silicene (which is different from that of graphene). © 2013 Elsevier B.V. All rights reserved.

  11. Pseudomagnetic fields and triaxial strain in graphene

    DEFF Research Database (Denmark)

    Settnes, Mikkel; Power, Stephen; Jauho, Antti-Pekka

    2016-01-01

    -binding calculations of single pseudomagnetic dots in extended graphene sheets confirm these predictions, and are also used to study the effect of rotating the strain direction with respect to the underlying graphene lattice, and varying the size of the pseudomagnetic dot.......Pseudomagnetic fields, which can result from nonuniform strain distributions, have received much attention in graphene systems due to the possibility of mimicking real magnetic fields with magnitudes of greater than 100 T. We examine systems with such strains confined to finite regions...

  12. Strain gage balances and buffet gages

    Science.gov (United States)

    Ferris, A. T.

    1983-01-01

    One-piece strain gage force balances were developed for use in the National Transonic Facility (NTF). This was accomplished by studying the effects of the cryogenic environment on materials, strain gages, cements, solders, and moisture proofing agents, and selecting those that minimized strain gage output changes due to temperature. In addition, because of the higher loads that may be imposed by the NTF, these balances are designed to carry a larger load for a given diameter than conventional balances. Full cryogenic calibrations were accomplished, and wind tunnel results that were obtained from the Langley 0-3-Meter Transonic Cryogenic Tunnel were used to verify laboratory test results.

  13. Ductile Damage Evolution and Strain Path Dependency

    Science.gov (United States)

    Tasan, C. C.; Hoefnagels, J. M. P.; Peerlings, R. H. J.; Geers, M. G. D.; ten Horn, C. H. L. J.; Vegter, H.

    2007-04-01

    Forming limit diagrams are commonly used in sheet metal industry to define the safe forming regions. These diagrams are built to define the necking strains of sheet metals. However, with the rise in the popularity of advance high strength steels, ductile fracture through damage evolution has also emerged as an important parameter in the determination of limit strains. In this work, damage evolution in two different steels used in the automotive industry is examined to observe the relationship between damage evolution and the strain path that is followed during the forming operation.

  14. Self-diffusion in compressively strained Ge

    International Nuclear Information System (INIS)

    Under a compressive biaxial strain of ∼ 0.71%, Ge self-diffusion has been measured using an isotopically controlled Ge single-crystal layer grown on a relaxed Si0.2Ge0.8 virtual substrate. The self-diffusivity is enhanced by the compressive strain and its behavior is fully consistent with a theoretical prediction of a generalized activation volume model of a simple vacancy mediated diffusion, reported by Aziz et al.[Phys. Rev. B 73, 054101 (2006)]. The activation volume of (-0.65±0.21) times the Ge atomic volume quantitatively describes the observed enhancement due to the compressive biaxial strain very well.

  15. A new radial strain and strain rate estimation method using autocorrelation for carotid artery

    Science.gov (United States)

    Ye, Jihui; Kim, Hoonmin; Park, Jongho; Yeo, Sunmi; Shim, Hwan; Lim, Hyungjoon; Yoo, Yangmo

    2014-03-01

    Atherosclerosis is a leading cause of cardiovascular disease. The early diagnosis of atherosclerosis is of clinical interest since it can prevent any adverse effects of atherosclerotic vascular diseases. In this paper, a new carotid artery radial strain estimation method based on autocorrelation is presented. In the proposed method, the strain is first estimated by the autocorrelation of two complex signals from the consecutive frames. Then, the angular phase from autocorrelation is converted to strain and strain rate and they are analyzed over time. In addition, a 2D strain image over region of interest in a carotid artery can be displayed. To evaluate the feasibility of the proposed radial strain estimation method, radiofrequency (RF) data of 408 frames in the carotid artery of a volunteer were acquired by a commercial ultrasound system equipped with a research package (V10, Samsung Medison, Korea) by using a L5-13IS linear array transducer. From in vivo carotid artery data, the mean strain estimate was -0.1372 while its minimum and maximum values were -2.961 and 0.909, respectively. Moreover, the overall strain estimates are highly correlated with the reconstructed M-mode trace. Similar results were obtained from the estimation of the strain rate change over time. These results indicate that the proposed carotid artery radial strain estimation method is useful for assessing the arterial wall's stiffness noninvasively without increasing the computational complexity.

  16. Dynamic Force Measurement with Strain Gauges

    Science.gov (United States)

    Lee, Bruce E.

    1974-01-01

    Discusses the use of four strain gauges, a Wheatstone bridge, and an oscilloscope to measure forces dynamically. Included is an example of determining the centripetal force of a pendulum in a general physics laboratory. (CC)

  17. Design parameters for borehole strain instrumentation

    Science.gov (United States)

    Gladwin, Michael T.; Hart, Rhodes

    1985-01-01

    The response of a borehole strain meter to hydrostatic and shear deformations in an isotropic medium is calculated to facilitate optimum instrument design and produce instrument response factors for parameters typically encountered in installed instruments. Results for an empty borehole are first compared with results for an instrument in intimate contact with the surrounding rock. The effects of the grout used to install the instrument are then examined. Where possible, analytic forms for the response factors are given. Results for typical installations are then presented in graphical form for optimizing instrument design in an environment of known elastic parameters. Alternatively, the results may be applied in the measurement of unknown strain signals, to correct for instrument response or to provide in-situ estimates of the elastic properties of the environment by examination of observed strain response to known strain signals.

  18. Five challenges in modelling interacting strain dynamics

    Directory of Open Access Journals (Sweden)

    Paul S. Wikramaratna

    2015-03-01

    Full Text Available Population epidemiological models where hosts can be infected sequentially by different strains have the potential to help us understand many important diseases. Researchers have in recent years started to develop and use such models, but the extra layer of complexity from multiple strains brings with it many technical challenges. It is therefore hard to build models which have realistic assumptions yet are tractable. Here we outline some of the main challenges in this area. First we begin with the fundamental question of how to translate from complex small-scale dynamics within a host to useful population models. Next we consider the nature of so-called “strain space”. We describe two key types of host heterogeneities, and explain how models could help generate a better understanding of their effects. Finally, for diseases with many strains, we consider the challenge of modelling how immunity accumulates over multiple exposures.

  19. Screening of Trichoderma strains tolerant to benzimidazole

    Institute of Scientific and Technical Information of China (English)

    LIU Kai-qi; XIANG Mei-mei; LIU Ren; ZENG Yong-san; ZHOU Hong-zi; YU Jin-feng; JIANG Xin-yin; ZHANG Yue-li

    2004-01-01

    @@ The screening of isolates and the assay of biocontrol mechanisms of Trichoderma were studied systematically in laboratory and greenhouse in vivo. The proteins tolerant to benzimidazole in Trichoderma strains were purified, and their physical and chemical properties were detected. Compared their biological activities in vitro and vivo in greenhouse, nine biocontrol strains (including Ty- 10-2, LTR-2, Tj-5-1, Tj-5-4, Ty- 11-1, Tj-11-3, Ty- 11-3, Tj-3-3-2, Tj-3-3-4) were screened. These biocontrol strains had faster rates of growth and higher inhibition to gray mould (Bortrytis cinerea),and the inhibition was stable. The effects of controlling gray mould in greenhouse with the screened Trichoderma strains were 70 % and 50 % in vivo.

  20. High Strain Rate Characterisation of Composite Materials

    DEFF Research Database (Denmark)

    Eriksen, Rasmus Normann Wilken

    The high strain rate characterisation of FRP materials present the experimenter with a new set of challenges in obtaining valid experimental data. These challenges were addressed in this work with basis in classic wave theory. The stress equilibrium process for linear elastic materials, as fibre......-reinforced polymers, were considered, and it was first shown that the loading history controls equilibrium process. Then the High-speed servo-hydraulic test machine was analysed in terms its ability to create a state of constant strain rate in the specimen. The invertible inertial forces in the load train prevented...... for testing fibre-reinforced polymers due to their elastic behaviour and low strain to failure. This is problematic as the High-speed servo-hydraulic test machine closes the gap between quasi-static tests rates and lower strain rates, which are achievable with the Split Hopkinson Pressure Bar. The Split...

  1. [Improvement of Trichoderma strains for biocontrol].

    Science.gov (United States)

    Benítez, T; Rey, M; Delgado-Jarana, J; Rincón, A M; Limón, M C

    2000-03-01

    The use of the fungal genus Trichoderma to control fungal plant diseases is a promising alternative to the use of chemical compounds. The aim of this work has been to obtain Trichoderma strains with improved capacity as biological control agents. To do so, the hydrolytic capacity on fungal cell walls of strains of the fungus Trichoderma harzianum has been increased. On one hand, transformation experiments with genes which coded for chitinases and glucanases have been carried out in T. harzianumstra ins. On the other hand, the medium composition has also been modified in order to eliminate proteolytic degradation of some of the overproduced enzymes. Finally, hybrid chitinolytic enzymes with substrate-binding domains have been produced as an alternative to obtain improved biocontrol strains. The transformant strains, when compared with the wild type, showed improved antifungal capacity against the phytopathogenic fungus Rhizoctonia solani, in in vitro experiments. PMID:15762779

  2. Strain Rate Induced Amorphization in Metallic Nanowires

    Energy Technology Data Exchange (ETDEWEB)

    Qi, Y.; Cagin, T.; Goddard, W.A. III [Materials and Process Simulation Center, California Institute of Technology, Pasadena, California 91125 (United States); Ikeda, H.; Samwer, K.; Johnson, W.L. [Keck Laboratory of Engineering Materials, California Institute of Technology, Pasadena, California 91125 (United States)

    1999-04-01

    Using molecular dynamics simulations with a many-body force field, we studied the deformation of single crystal Ni and NiCu random alloy nanowires subjected to uniform strain rates but kept at 300thinspthinspK. For all strain rates, the Ni nanowire is elastic up to 7.5{percent} strain with a yield stress of 5.5thinspthinspGPa, far above that of bulk Ni. At high strain rates, we find that for both systems the crystalline phase transforms continuously to an amorphous phase, exhibiting a dramatic change in atomic short-range order and a near vanishing of the tetragonal shear elastic constant perpendicular to the tensile direction. This amorphization which occurs directly from the homogeneous, elastically deformed system with no chemical or structural inhomogeneities exhibits a new mode of amorphization. {copyright} {ital 1999} {ital The American Physical Society}

  3. 3D Morphing Using Strain Field Interpolation

    Institute of Scientific and Technical Information of China (English)

    Han-Bing Yan; Shi-Min Hu; Ralph R Martin

    2007-01-01

    In this paper, we present a new technique based on strain fields to carry out 3D shape morphing for applicationsin computer graphics and related areas.Strain is an important geometric quantity used in mechanics to describe the deformation of objects.We apply it in a novel way to analyze and control deformation in morphing.Using position vector fields, the strain field relating source and target shapes can be obtained.By interpolating this strain field between zero and a final desired value we can obtain the position field for intermediate shapes.This method ensures that the 3D morphing process is smooth.Locally, volumes suffer minimal distortion, and no shape jittering or wobbling happens: other methods do not necessarily have these desirable properties.We also show how to control the method so that changes of shape (in particular, size changes) vary linearly with time.

  4. Five challenges in modelling interacting strain dynamics

    DEFF Research Database (Denmark)

    Wikramaratna, Paul S; Kurcharski, Adam; Gupta, Sunetra;

    2015-01-01

    Population epidemiological models where hosts can be infected sequentially by different strains have the potential to help us understand many important diseases. Researchers have in recent years started to develop and use such models, but the extra layer of complexity from multiple strains brings...... with it many technical challenges. It is therefore hard to build models which have realistic assumptions yet are tractable. Here we outline some of the main challenges in this area. First we begin with the fundamental question of how to translate from complex small-scale dynamics within a host to...... useful population models. Next we consider the nature of so-called “strain space”. We describe two key types of host heterogeneities, and explain how models could help generate a better understanding of their effects. Finally, for diseases with many strains, we consider the challenge of modelling how...

  5. Strain Gauges Mounted To Retain Calibration

    Science.gov (United States)

    Butler, Barry L.

    1993-01-01

    Silicon-based semiconductor strain gauges mounted in such way they retain original calibration for several years instead of few months. Improvement effected by bonding gauges to ceramic substrates with glasses instead of epoxies as adhesives.

  6. Broken Bones, Sprains, and Strains (For Parents)

    Science.gov (United States)

    ... 5 Things to Know About Zika & Pregnancy Broken Bones, Sprains, and Strains KidsHealth > For Parents > Broken Bones, ... home. What to Do: For a Suspected Broken Bone: Do not move a child whose injury involves ...

  7. Strain imaging by Bragg edge neutron transmission

    CERN Document Server

    Santisteban, J R; Fitzpatrick, M E; Steuwer, A; Withers, P J; Daymond, M R; Johnson, M W; Rhodes, N; Schooneveld, E M

    2002-01-01

    The Bragg edges appearing in the transmitted time-of-flight spectra of polycrystalline materials have been recorded using a two-dimensional array of detectors. Subsequent analysis has enabled maps of the elastic strain to be produced.

  8. Review of strain buckling: analysis methods

    International Nuclear Information System (INIS)

    This report represents an attempt to review the mechanical analysis methods reported in the literature to account for the specific behaviour that we call buckling under strain. In this report, this expression covers all buckling mechanisms in which the strains imposed play a role, whether they act alone (as in simple buckling under controlled strain), or whether they act with other loadings (primary loading, such as pressure, for example). Attention is focused on the practical problems relevant to LMFBR reactors. The components concerned are distinguished by their high slenderness ratios and by rather high thermal levels, both constant and variable with time. Conventional static buckling analysis methods are not always appropriate for the consideration of buckling under strain. New methods must therefore be developed in certain cases. It is also hoped that this review will facilitate the coding of these analytical methods to aid the constructor in his design task and to identify the areas which merit further investigation

  9. Energy Harvesting Wireless Strain Networks Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Prime Research LC (PPLC) and Virginia Tech (VT) propose to develop an energy harvesting wireless strain node technology that utilizes single-crystal piezoelectric...

  10. Superinfection Behaviors on Scale-Free Networks with Competing Strains

    Science.gov (United States)

    Wu, Qingchu; Small, Michael; Liu, Huaxiang

    2013-02-01

    This paper considers the epidemiology of two strains ( I, J) of a disease spreading through a population represented by a scale-free network. The epidemiological model is SIS and the two strains have different reproductive numbers. Superinfection means that strain I can infect individuals already infected with strain J, replacing the strain J infection. Individuals infected with strain I cannot be infected with strain J. The model is set up as a system of ordering differential equations and stability of the disease free, marginal strain I and strain J, and coexistence equilibria are assessed using linear stability analysis, supported by simulations. The main conclusion is that superinfection, as modeled in this paper, can allow strain I to coexist with strain J even when it has a lower basic reproductive number. Most strikingly, it can allow strain I to persist even when its reproductive number is less than 1.

  11. Information about the Current Strain of Clostridium difficile

    Science.gov (United States)

    ... treatment of this epidemic strain different? How does fluoroquinolone resistance affect management of this strain? What should ... guidelines on internet) Top of page How does fluoroquinolone resistance affect management of this strain? Increased fluoroquinolone ...

  12. Conductive lithographic film fabricated resistive strain gauges

    OpenAIRE

    Hay, GI; Evans, PSA; Harrison, DJ; Southee, DJ; Simpson, G; Harrey, PM

    2003-01-01

    This paper reports progress in sensor fabrication by the conductive lithographic film (CLF) printing process. Work describing strain sensitive structures manufactured using a modified printing process and conductive inks are addressed. The performance of a 'single ink' strain sensitive structure when printed on six alternative polymer substrates (GlossArt, PolyArt, Teslin, Mylar C, Mylar and Kapton) is analysed. Though not intending to compete with conventional gauges in high tolerance measur...

  13. Characterization of lithographically printed resistive strain gauges

    OpenAIRE

    Hay, G.I.; Evans, P.S.A.; Harrison, D J; Southee, D; Simpson, G; Harrey, P.M.

    2005-01-01

    This paper reports progress in sensor fabrication by the conductive lithographic film (CLF) printing process. Work describing strain-sensitive structures manufactured using a modified printing process and conductive inks is addressed. The performance of a "single-ink" strain-sensitive structure when printed on six alternative substrates (GlossArt, PolyArt, Teslin, Mylar C, Melinex, and Kapton) is analyzed. Though not intending to compete with conventional gauges in high-tolerance measurement,...

  14. Hydraulic Calibrator for Strain-Gauge Balances

    Science.gov (United States)

    Skelly, Kenneth; Ballard, John

    1987-01-01

    Instrument for calibrating strain-gauge balances uses hydraulic actuators and load cells. Eliminates effects of nonparallelism, nonperpendicularity, and changes of cable directions upon vector sums of applied forces. Errors due to cable stretching, pulley friction, and weight inaccuracy also eliminated. New instrument rugged and transportable. Set up quickly. Developed to apply known loads to wind-tunnel models with encapsulated strain-gauge balances, also adapted for use in calibrating dynamometers, load sensors on machinery and laboratory instruments.

  15. Strain gauge for high temperature tests

    International Nuclear Information System (INIS)

    A strain gauge is described that is intended to measure longitudinal and lateral strains during tubular specimen loading by an axial force and internal pressure at test temperatures up to 1000 K. The use of the gauge for creep study of steel type Kh18N10T at 870 K under complex stress state is given as an example. Experimental data confirm the suitability of the gauge for the purpose mentioned and sufficient accuracy of parameters determined. 3 refs., 3 figs

  16. Elastic constants from microscopic strain fluctuations

    OpenAIRE

    Sengupta, Surajit; Nielaba, Peter; Rao, Madan; Binder, K.

    1999-01-01

    Fluctuations of the instantaneous local Lagrangian strain $\\epsilon_{ij}(\\bf{r},t)$, measured with respect to a static ``reference'' lattice, are used to obtain accurate estimates of the elastic constants of model solids from atomistic computer simulations. The measured strains are systematically coarse- grained by averaging them within subsystems (of size $L_b$) of a system (of total size $L$) in the canonical ensemble. Using a simple finite size scaling theory we predict the behaviour of th...

  17. Cranial bone morphometric study among mouse strains

    OpenAIRE

    Yamamura Ken-ichi; Kawakami Minoru

    2008-01-01

    Abstract Background Little is known about the molecular mechanism which regulates how the whole cranium is shaped. Mouse models currently available for genetic research include several hundreds of unique inbred strains and genetically engineered mutants. By cross comparing their genomic structures, we can elucidate the cause of any differences in the phenotype between two strains. The craniometry of subspecies, or closely related species, of mice provide a good systemic model to study the rel...

  18. A tunable strain sensor using nanogranular metals

    OpenAIRE

    Friedemann Völklein; Alexander Kaya; Jens Müller; Pintu Das; Heiko Reith; Fabrizio Porrati; Roland Sachser; Markus Baranowski; Christina Grimm; Schwalb, Christian H.; Michael Huth

    2010-01-01

    This paper introduces a new methodology for the fabrication of strain-sensor elements for MEMS and NEMS applications based on the tunneling effect in nano-granular metals. The strain-sensor elements are prepared by the maskless lithography technique of focused electron-beam-induced deposition (FEBID) employing the precursor trimethylmethylcyclopentadienyl platinum [MeCpPt(Me)3]. We use a cantilever-based deflection technique to determine the sensitivity (gauge factor) of the sensor element. W...

  19. FRP rupture strains in FRP wrapped columns

    OpenAIRE

    Li, Shiqing

    2012-01-01

    Applying lateral confinement to concrete columns using fibre-reinforced polymer (FRP) composites is a very promising technique. FRP rupture is the typical failure mode of FRP wrapped columns under axial compression. numerous experiments have shown that the FRP rupture strain in an FRP wrapped circular column is significantly lower than the FRP ultimate rupture strain determined from flat coupon test of FRP. Despite a large number of studies on the application of FRP confined columns, the mech...

  20. Digital Eye Strain Reduction Techniques: A Review

    OpenAIRE

    Preethi J Seegehalli

    2016-01-01

    Digital eye strain or computer vision syndrome (CVS) is caused when we spend considerable amount of time in staring at digital screens of desktop computer, laptop, e-readers, tablets and mobile phones. This paper discusses the different the causes for visual fatigue and digital eye strain reduction techniques like usage of optical glass, flicker free screen, color filtering, fuzzy logic based brightness adaption technique, bias lighting screens, optimizing monitor’s color temperature and Auto...

  1. Elastically Relaxed Free-standing Strained-Si Nanomembranes

    OpenAIRE

    Roberts, Michelle M.; Klein, Levente J.; Savage, Don E.; Slinker, Keith A.; Friesen, Mark; Celler, George; Eriksson, Mark A.; Lagally, Max G.

    2006-01-01

    Strain plays a critical role in the properties of materials. In silicon and silicon-germanium, strain provides a mechanism for control of both carrier mobility and band offsets. In materials integra-tion, strain is typically tuned through the use of dislocations and elemental composition. We demonstrate a versatile method to control strain, by fabricating membranes in which the final strain state is controlled by elastic strain sharing, i.e., without the formation of defects. We grow Si/SiGe ...

  2. Whole Genome Analysis of a Wine Yeast Strain

    OpenAIRE

    Hauser, Nicole C.; Kurt Fellenberg; Rosario Gil; Sonja Bastuck; Hoheisel, Jörg D; Pérez-Ortín, José E.

    2001-01-01

    Saccharomyces cerevisiae strains frequently exhibit rather specific phenotypic features needed for adaptation to a special environment. Wine yeast strains are able to ferment musts, for example, while other industrial or laboratory strains fail to do so. The genetic differences that characterize wine yeast strains are poorly understood, however. As a first search of genetic differences between wine and laboratory strains, we performed DNA-array analyses on the typical wine yeast strain T73 an...

  3. Strain rate patterns from dense GPS networks

    Directory of Open Access Journals (Sweden)

    M. Hackl

    2009-07-01

    Full Text Available The knowledge of the crustal strain rate tensor provides a description of geodynamic processes such as fault strain accumulation, which is an important parameter for seismic hazard assessment, as well as anthropogenic deformation. In the past two decades, the number of observations and the accuracy of satellite based geodetic measurements like GPS greatly increased, providing measured values of displacements and velocities of points. Here we present a method to obtain the full continuous strain rate tensor from dense GPS networks. The tensorial analysis provides different aspects of deformation, such as the maximum shear strain rate, including its direction, and the dilatation strain rate. These parameters are suitable to characterize the mechanism of the current deformation. Using the velocity fields provided by SCEC and UNAVCO, we were able to localize major active faults in Southern California and to characterize them in terms of faulting mechanism. We also show that the large seismic events that occurred recently in the study region highly contaminate the measured velocity field that appears to be strongly affected by transient postseismic deformation. Finally, we applied this method to coseismic displacement data of two earthquakes in Iceland, showing that the strain fields derived by these data provide important information on the location and the focal mechanism of the ruptures.

  4. Instrument for measuring fuel cladding strain

    International Nuclear Information System (INIS)

    Development work to provide instrumentation for the continuous measurement of strain of material specimens such as nuclear fuel cladding has shown that a microwave sensor and associated instrumentation hold promise. The cylindrical sensor body enclosing the specimen results in a coaxial resonator absorbing microwave energy at frequencies dependent upon the diameter of the specimen. Diametral changes of a microinch can be resolved with use of the instrumentation. Very reasonable values of elastic strain were measured at 750F and 10000F for an internally pressurized 20 percent C.W. 316 stainless steel specimen simulating nuclear fuel cladding. The instrument also indicated the creep strain of the same specimen pressurized at 6500 psi and at a temperature of 10000F for a period of 700 hours. Although the indicated strain appears greater than actual, the sensor/specimen unit experienced considerable oxidation even though an inert gas purge persisted throughout the test duration. By monitoring at least two modes of resonance, the measured strain was shown to be nearly independent of sensor temperature. To prevent oxidation, a second test was performed in which the specimen/sensor units were contained in an evacuated enclosure. The strain of the two prepressurized specimens as indicated by the microwave instrumentation agreed very closely with pre- and post-test measurements obtained with use of a laser interferometer

  5. The mechanical consequences of load bearing in the equine third metacarpal across speed and gait: the nonuniform distributions of normal strain, shear strain, and strain energy density

    OpenAIRE

    Rubin, Clinton T.; Seeherman, Howard; Qin, Yi-Xian; Gross, Ted S.

    2013-01-01

    Distributions of normal strain, shear strain, and strain energy density (SED) were determined across the midshaft of the third metacarpal (MCIII, or cannon bone) of 3 adult thoroughbred horses as a function of speed and gait. A complete characterization of the mechanical demands of the bone made through the stride and from mild through the extremes of locomotion was possible by using three 3-element rosette strain gauges bonded at the diaphyseal midshaft of the MCIII and evaluating the strain...

  6. Strain rate measurement by Electronic Speckle Pattern Interferometry: A new look at the strain localization onset

    Energy Technology Data Exchange (ETDEWEB)

    Guelorget, Bruno [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France)]. E-mail: bruno.guelorget@utt.fr; Francois, Manuel [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France); Vial-Edwards, Cristian [Departemento de Ingenieria Mecanica y Metalurgica, Pontificia Universidad Catolica de Chile, Vicuna Mackenna 4860, 6904411 Santiago (Chile); Montay, Guillaume [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France); Daniel, Laurent [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France); Lu, Jian [Universite de Technologie de Troyes (UTT), Laboratoire des Systemes Mecaniques et d' ingenierie Simultanee (LASMIS, CNRS FRE 2719), 12 rue Marie Curie, B.P. 2060, 10010 Troyes Cedex (France)

    2006-01-15

    In-plane Electronic Speckle Pattern Interferometry has been successfully used during tensile testing of semi-hard copper sheets in order to measure the strain rate. On one hand, heterogeneity in strain rate field has been found before the maximum of the tensile force ({epsilon} {sup t} {approx_equal} 19.4 and 25.4%, respectively). Thus, a localization phenomenon occurs before the classic Considere's criterion (dF = 0) for the diffuse neck initiation. On the other hand, strain rate measurement before fracture shows the moment where one of the two slip band systems becomes predominant, then strain concentrates in a small area, the shear band. Uncertainty evaluation has been carried out, which shows a very good accuracy of the total strain and the strain rate measurements.

  7. Strain fields adjacent to bone-implant interfaces: strain field analysis using digital image correlation techniques

    OpenAIRE

    Ribeiro, J. E.; Monteiro, J.; Lopes, H.; Vaz, M.A.P.; Guedes, R.M.

    2008-01-01

    When using conventional surface strain measurement techniques (e.g. strain gauges, dial gauges), the measurement of deformations within cancellous bone is frequently hampered by the material’s highly porous structure and poor mechanical properties. Although detailed strain maps derived from actual experimental data have the potential to resolve many questions concerning the mechanics of cancellous bone, the traditional method of producing maps through measurements with optical techniques has ...

  8. Inexpensive Implementation of Many Strain Gauges

    Science.gov (United States)

    Berkun, Andrew C.

    2010-01-01

    It has been proposed to develop arrays of strain gauges as arrays of ordinary metal film resistors and associated electronic readout circuitry on printed circuit boards or other suitable substrates. This proposal is a by-product of a development of instrumentation utilizing metal film resistors on printed-circuit boards to measure temperatures at multiple locations. In the course of that development, it was observed that in addition to being sensitive to temperature, the metal film resistors were also sensitive to strains in the printed-circuit boards to which they were attached. Because of the low cost of ordinary metal film resistors (typically strain gauges, possibly concentrated in small areas. For example, such an array could be designed for use as a computer keyboard with no moving parts, as a device for sensing the shape of an object resting on a surface, or as a device for measuring strains at many points on a mirror, a fuel tank, an airplane wing, or other large object. Ordinarily, the effect of strain on resistance would be regarded as a nuisance in a temperature-measuring application, and the effect of temperature on resistance would be regarded as a nuisance in a strain-measuring application. The strain-induced changes in resistance of the metal film resistors in question are less than those of films in traditional strain gauges. The main novel aspect of present proposal lies in the use of circuitry affording sufficient sensitivity to measure strain plus means for compensating for the effect of temperature. For an array of metal film resistors used as proposed, the readout circuits would include a high-accuracy analog-to-digital converter fed by a low noise current source, amplifier chain, and an analog multiplexer chain. Corrections would be provided by use of high-accuracy calibration resistors and a temperature sensor. By use of such readout circuitry, it would be possible to read the resistances of as many as 100 fixed resistors in a time interval

  9. True stress-strain curve acquisition for irradiated stainless steel including the range exceeding necking strain

    Science.gov (United States)

    Kamaya, Masayuki; Kitsunai, Yuji; Koshiishi, Masato

    2015-10-01

    True stress-strain curves were obtained for irradiated 316L stainless steel by a tensile test and by a curve estimation procedure. In the tensile test, the digital image correlation technique together with iterative finite element analysis was applied in order to identify curves for strain larger than the necking strain. The true stress-strain curves were successfully obtained for the strain of more than 0.4 whereas the necking strain was about 0.2 in the minimum case. The obtained true stress-strain curves were approximated well with the Swift-type equation including the post-necking strain even if the exponential constant n was fixed to 0.5. Then, the true stress-strain curves were estimated by a curve estimation procedure, which was referred to as the K-fit method. Material properties required for the K-fit method were the yield and ultimate strengths or only the yield strength. Some modifications were made for the K-fit method in order to improve estimation accuracy for irradiated stainless steels.

  10. Within-strain variation in behavior differs consistently between common inbred strains of mice.

    Science.gov (United States)

    Loos, Maarten; Koopmans, Bastijn; Aarts, Emmeke; Maroteaux, Gregoire; van der Sluis, Sophie; Verhage, Matthijs; Smit, August B

    2015-08-01

    Genetic and environmental factors interact throughout life and give rise to individual differences, i.e., individuality. The diversifying effect of environmental factors is counteracted by genetic mechanisms to yield persistence of specific features (robustness). Here, we compared robustness between cohorts of isogenic mice of eight different commonly used strains by analyzing to what extent environmental variation contributed to individuality in each of the eight genotypes, using a previously published dataset. Behavior was assessed in the home-cage, providing control over environmental factors, to reveal within-strain variability in numerous spontaneous behaviors. Indeed, despite standardization and in line with previous studies, substantial variability among mice of the same inbred strain was observed. Strikingly, across a multidimensional set of 115 behavioral parameters, several strains consistently ranked high in within-strain variability (DBA/2J, 129S1/Sv A/J and NOD/LtJ), whereas other strains ranked low (C57BL/6J and BALB/c). Strain rankings of within-strain variability in behavior were confirmed in an independent, previously published behavioral dataset using conventional behavioral tests administered to different mice from the same breeding colonies. Together, these show that genetically inbred mouse strains consistently differ in phenotypic robustness against environmental variation, suggesting that genetic factors contribute to variation in robustness. PMID:26123533

  11. Variation in the strain anisotropy of Zircaloy with temperature and strain

    International Nuclear Information System (INIS)

    Strain anisotropy was investigated at temperatures in the range 293 to 1117K in circular tensile specimens prepared from rolled Zircaloy-2 plate so that their tensile axes were parallel to and transverse to the rolling direction. The strain anisotropy factor for both types of specimen increased markedly in the high alpha phase region above 923K reaching a maximum at circa 1070K. Above this temperature in the alpha-plus-beta phase region the strain anisotropy decreased rapidly as the proportion of beta phase increased and was almost non-existent at 1173K. The strain anisotropy was markedly strain dependent, particularly in the high alpha phase region. The study was extended to Zircaloy-4 pressurized water reactor (PWR) 17 x 17 type fuel rod tubing specimens which were strained under biaxial conditions using cooling conditions which promoted uniform diametral strain over most of their lengths (circa 250 mm). In these circumstances the strain anisotropy is manifest by a reduction in length. Measurement of this change along with that in diameter and wall thickness produced data from which the strain anisotropy factor was calculated. The results, although influenced by additional factors discussed in the paper, were similar to those observed in the uniaxial Zircaloy-2 tensile tests. (author)

  12. A numerical method for determining the strain rate intensity factor under plane strain conditions

    Science.gov (United States)

    Alexandrov, S.; Kuo, C.-Y.; Jeng, Y.-R.

    2016-07-01

    Using the classical model of rigid perfectly plastic solids, the strain rate intensity factor has been previously introduced as the coefficient of the leading singular term in a series expansion of the equivalent strain rate in the vicinity of maximum friction surfaces. Since then, many strain rate intensity factors have been determined by means of analytical and semi-analytical solutions. However, no attempt has been made to develop a numerical method for calculating the strain rate intensity factor. This paper presents such a method for planar flow. The method is based on the theory of characteristics. First, the strain rate intensity factor is derived in characteristic coordinates. Then, a standard numerical slip-line technique is supplemented with a procedure to calculate the strain rate intensity factor. The distribution of the strain rate intensity factor along the friction surface in compression of a layer between two parallel plates is determined. A high accuracy of this numerical solution for the strain rate intensity factor is confirmed by comparison with an analytic solution. It is shown that the distribution of the strain rate intensity factor is in general discontinuous.

  13. The influence of strain rate and hydrogen on the plane-strain ductility of Zircaloy cladding

    Energy Technology Data Exchange (ETDEWEB)

    Link, T.M.; Motta, A.T.; Koss, D.A. [Pennsylvania State Univ., University Park, PA (United States)

    1998-03-01

    The authors studied the ductility of unirradiated Zircaloy-4 cladding under loading conditions prototypical of those found in reactivity-initiated accidents (RIA), i.e.: near plane-strain deformation in the hoop direction (transverse to the cladding axis) at room temperature and 300 C and high strain rates. To conduct these studies, they developed a specimen configuration in which near plane-strain deformation is achieved in the gage section, and a testing methodology that allows one to determine both the limit strain at the onset of localized necking and the fracture strain. The experiments indicate that there is little effect of strain rate (10{sup {minus}3} to 10{sup 2} s{sup {minus}1}) on the ductility of unhydrided Zircaloy tubing deformed under near plane-strain conditions at either room temperature or 300 C. Preliminary experiments on cladding containing 190 ppm hydrogen show only a small loss of fracture strain but no clear effect on limit strain. The experiments also indicate that there is a significant loss of Zircaloy ductility when surface flaws are present in the form of thickness imperfections.

  14. Elastocaloric cooling processes: The influence of material strain and strain rate on efficiency and temperature span

    Science.gov (United States)

    Schmidt, Marvin; Schütze, Andreas; Seelecke, Stefan

    2016-06-01

    This paper discusses the influence of material strain and strain rate on efficiency and temperature span of elastocaloric cooling processes. The elastocaloric material, a newly developed quaternary Ni-Ti-Cu-V alloy, is characterized at different maximum strains and strain rates. The experiments are performed with a specially designed test setup, which enables the measurement of mechanical and thermal process parameters. The material efficiency is compared to the efficiency of the Carnot process at equivalent thermal operation conditions. This method allows for a direct comparison of the investigated material with other caloric materials.

  15. Elastocaloric cooling processes: The influence of material strain and strain rate on efficiency and temperature span

    Directory of Open Access Journals (Sweden)

    Marvin Schmidt

    2016-06-01

    Full Text Available This paper discusses the influence of material strain and strain rate on efficiency and temperature span of elastocaloric cooling processes. The elastocaloric material, a newly developed quaternary Ni-Ti-Cu-V alloy, is characterized at different maximum strains and strain rates. The experiments are performed with a specially designed test setup, which enables the measurement of mechanical and thermal process parameters. The material efficiency is compared to the efficiency of the Carnot process at equivalent thermal operation conditions. This method allows for a direct comparison of the investigated material with other caloric materials.

  16. Mycobacterium tuberculosis strains exhibit differential and strain-specific molecular signatures in pulmonary epithelial cells.

    Science.gov (United States)

    Mvubu, Nontobeko Eunice; Pillay, Balakrishna; Gamieldien, Junaid; Bishai, William; Pillay, Manormoney

    2016-12-01

    Although pulmonary epithelial cells are integral to innate and adaptive immune responses during Mycobacterium tuberculosis infection, global transcriptomic changes in these cells remain largely unknown. Changes in gene expression induced in pulmonary epithelial cells infected with M. tuberculosis F15/LAM4/KZN, F11, F28, Beijing and Unique genotypes were investigated by RNA sequencing (RNA-Seq). The Illumina HiSeq 2000 platform generated 50 bp reads that were mapped to the human genome (Hg19) using Tophat (2.0.10). Differential gene expression induced by the different strains in infected relative to the uninfected cells was quantified and compared using Cufflinks (2.1.0) and MeV (4.0.9), respectively. Gene expression varied among the strains with the total number of genes as follows: F15/LAM4/KZN (1187), Beijing (1252), F11 (1639), F28 (870), Unique (886) and H37Rv (1179). A subset of 292 genes was commonly induced by all strains, where 52 genes were down-regulated while 240 genes were up-regulated. Differentially expressed genes were compared among the strains and the number of induced strain-specific gene signatures were as follows: F15/LAM4/KZN (138), Beijing (52), F11 (255), F28 (55), Unique (186) and H37Rv (125). Strain-specific molecular gene signatures associated with functional pathways were observed only for the Unique and H37Rv strains while certain biological functions may be associated with other strain signatures. This study demonstrated that strains of M. tuberculosis induce differential gene expression and strain-specific molecular signatures in pulmonary epithelial cells. Specific signatures induced by clinical strains of M. tuberculosis can be further explored for novel host-associated biomarkers and adjunctive immunotherapies. PMID:27497873

  17. Mycobacterium tuberculosis strains exhibit differential and strain-specific molecular signatures in pulmonary epithelial cells.

    Science.gov (United States)

    Mvubu, Nontobeko Eunice; Pillay, Balakrishna; Gamieldien, Junaid; Bishai, William; Pillay, Manormoney

    2016-12-01

    Although pulmonary epithelial cells are integral to innate and adaptive immune responses during Mycobacterium tuberculosis infection, global transcriptomic changes in these cells remain largely unknown. Changes in gene expression induced in pulmonary epithelial cells infected with M. tuberculosis F15/LAM4/KZN, F11, F28, Beijing and Unique genotypes were investigated by RNA sequencing (RNA-Seq). The Illumina HiSeq 2000 platform generated 50 bp reads that were mapped to the human genome (Hg19) using Tophat (2.0.10). Differential gene expression induced by the different strains in infected relative to the uninfected cells was quantified and compared using Cufflinks (2.1.0) and MeV (4.0.9), respectively. Gene expression varied among the strains with the total number of genes as follows: F15/LAM4/KZN (1187), Beijing (1252), F11 (1639), F28 (870), Unique (886) and H37Rv (1179). A subset of 292 genes was commonly induced by all strains, where 52 genes were down-regulated while 240 genes were up-regulated. Differentially expressed genes were compared among the strains and the number of induced strain-specific gene signatures were as follows: F15/LAM4/KZN (138), Beijing (52), F11 (255), F28 (55), Unique (186) and H37Rv (125). Strain-specific molecular gene signatures associated with functional pathways were observed only for the Unique and H37Rv strains while certain biological functions may be associated with other strain signatures. This study demonstrated that strains of M. tuberculosis induce differential gene expression and strain-specific molecular signatures in pulmonary epithelial cells. Specific signatures induced by clinical strains of M. tuberculosis can be further explored for novel host-associated biomarkers and adjunctive immunotherapies.

  18. Anisotropic nature of radially strained metal tubes

    Science.gov (United States)

    Strickland, Julie N.

    Metal pipes are sometimes swaged by a metal cone to enlarge them, which increases the strain in the material. The amount of strain is important because it affects the burst and collapse strength. Burst strength is the amount of internal pressure that a pipe can withstand before failure, while collapse strength is the amount of external pressure that a pipe can withstand before failure. If the burst or collapse strengths are exceeded, the pipe may fracture, causing critical failure. Such an event could cost the owners and their customers millions of dollars in clean up, repair, and lost time, in addition to the potential environmental damage. Therefore, a reliable way of estimating the burst and collapse strength of strained pipe is desired and valuable. The sponsor currently rates strained pipes using the properties of raw steel, because those properties are easily measured (for example, yield strength). In the past, the engineers assumed that the metal would be work-hardened when swaged, so that yield strength would increase. However, swaging introduces anisotropic strain, which may decrease the yield strength. This study measured the yield strength of strained material in the transverse and axial direction and compared them to raw material, to determine the amount of anisotropy. This information will be used to more accurately determine burst and collapse ratings for strained pipes. More accurate ratings mean safer products, which will minimize risk for the sponsor's customers. Since the strained metal has a higher yield strength than the raw material, using the raw yield strength to calculate burst and collapse ratings is a conservative method. The metal has even higher yield strength after strain aging, which indicates that the stresses are relieved. Even with the 12% anisotropy in the strained and 9% anisotropy in the strain aged specimens, the raw yield strengths are lower and therefore more conservative. I recommend that the sponsor continue using the raw

  19. Fast flexible electronics with strained silicon nanomembranes.

    Science.gov (United States)

    Zhou, Han; Seo, Jung-Hun; Paskiewicz, Deborah M; Zhu, Ye; Celler, George K; Voyles, Paul M; Zhou, Weidong; Lagally, Max G; Ma, Zhenqiang

    2013-01-01

    Fast flexible electronics operating at radio frequencies (>1 GHz) are more attractive than traditional flexible electronics because of their versatile capabilities, dramatic power savings when operating at reduced speed and broader spectrum of applications. Transferrable single-crystalline Si nanomembranes (SiNMs) are preferred to other materials for flexible electronics owing to their unique advantages. Further improvement of Si-based device speed implies significant technical and economic advantages. While the mobility of bulk Si can be enhanced using strain techniques, implementing these techniques into transferrable single-crystalline SiNMs has been challenging and not demonstrated. The past approach presents severe challenges to achieve effective doping and desired material topology. Here we demonstrate the combination of strained- NM-compatible doping techniques with self-sustained-strain sharing by applying a strain-sharing scheme between Si and SiGe multiple epitaxial layers, to create strained print-transferrable SiNMs. We demonstrate a new speed record of Si-based flexible electronics without using aggressively scaled critical device dimensions.

  20. Assessment of myocardial strain and strain rate by tissue doppler echocar-diography

    Directory of Open Access Journals (Sweden)

    Ekimova N.A.

    2013-03-01

    Full Text Available The objective of the article is to review the current data on the method of quantitative evaluation of cardiac mechanics — assessment of myocardial strain and strain rate according to the results of the tissue Doppler echocardiography and prospects of its clinical application.

  1. Development of the invar36 thin film strain gauge sensor for strain measurement

    International Nuclear Information System (INIS)

    This paper presents development of invar36 thin film strain gauges of various thicknesses ranging from 100 to 1400 Å for strain measurement. The strain gauges are deposited on microslides using the dc magnetron sputtering technique. Resistivity, temperature coefficient of resistance (TCR) and gauge factors of all gauges are measured and compared with each other. TCR is estimated by systematic annealing of gauges in vacuum and found as low as 190 ppm °C−1. A four-point bending setup is designed and fabricated to measure the gauge factors of all gauges. The gauge factor of relatively thinner strain gauge is found as high as 4.5 and for strain gauges with thickness greater than 500 Å gauge factor is found less than 2.5. The variations of gauge resistance with applied strain are studied in terms of linearity, hysteresis and repeatability. The developed strain gauges are connected in a full-bridge configuration and the output response to the applied strain is studied at different excitation voltages. (paper)

  2. Measurement of high temperature strain by the laser-speckle strain gauge

    Science.gov (United States)

    Yamaguchi, I.

    1984-01-01

    By using the laser-speckle strain gauge, the strain of metal at the temperature lower than 250 C is measured. The principle of the gauge is to measure the expansion or contraction of the fine structures of surface by detecting the resultant speckle displacement in an optoelectronic way, whereby the effect of rigid-body motion is automatically cancelled out with the aid of a differential detection system. A transportable apparatus was built and a comparison experiment performed with a resistance strain gauge at room temperature. It has a strain sensitivity of .00002, a gauge length smaller than 1 mm, and no upper limit in a range of strain measurement. In the measurement of high-temperature strain it is free from the need for a dummy gauge and insensitive to an electric drift effect. As examples of strain measurement at high-temperature, thermal expansion and contraction of a top of a soldering iron are measured. The interval of the measurement can be made at shortest 1.6 sec. and the change in the strain is clearly followed until the ultimate stationary temperature is reached.

  3. Validation of perceptual strain index to evaluate the thermal strain in experimental hot conditions

    Directory of Open Access Journals (Sweden)

    Habibollah Dehghan

    2015-01-01

    Conclusions: The research findings showed when there is no access to other forms of methods to evaluate the heat stress, it can be used the PeSI in evaluating the strain because of its favorable correlation with the thermal strain.

  4. Characterization of Integrated Optical Strain Sensors Based on Silicon Waveguides

    NARCIS (Netherlands)

    Westerveld, W.J.; Leinders, S.M.; Muilwijk, P.M.; Pozo, J.

    2013-01-01

    Microscale strain gauges are widely used in micro electro-mechanical systems (MEMS) to measure strains such as those induced by force, acceleration, pressure or sound. We propose all-optical strain sensors based on micro-ring resonators to be integrated with MEMS. We characterized the strain-induced

  5. ON STRAIN RATE SENSITIVITY OF BETA-TITANIUM ALLOYS

    OpenAIRE

    Kobayashi, A.; Takeda, N.; Ogihara, S.; Li, Y.

    1991-01-01

    Ti-15V-3Cr-3A1-3Sn beta-titanium alloys are subjected to 103/s tensile strain rate by the one bar method to investigate strain rate sensitivity. It is found that the ultimate strength, the total elongation and the absorbed energy, all increase with the increase in strain rate. Dynamical stress-strain curves are also obtained.

  6. Complete Genome Sequences of 17 Rapidly Growing Nontuberculous Mycobacterial Strains

    Science.gov (United States)

    Spilker, Theodore; LiPuma, John J.

    2016-01-01

    We report the complete genome sequences of 17 rapidly growing nontuberculous mycobacterial (NTM) strains, including 16 Mycobacterium abscessus complex strains and one M. immunogenum strain. These sequences add value to studies of the genetic diversity of rapidly growing NTM strains recovered from human specimens. PMID:27660787

  7. Complete Genome Sequences of 17 Rapidly Growing Nontuberculous Mycobacterial Strains.

    Science.gov (United States)

    Caverly, Lindsay J; Spilker, Theodore; LiPuma, John J

    2016-01-01

    We report the complete genome sequences of 17 rapidly growing nontuberculous mycobacterial (NTM) strains, including 16 Mycobacterium abscessus complex strains and one M. immunogenum strain. These sequences add value to studies of the genetic diversity of rapidly growing NTM strains recovered from human specimens. PMID:27660787

  8. ANISOTROPIC STRAIN-HARDENING IN POLYCRYSTALLINE COPPER AND ALUMINUM

    NARCIS (Netherlands)

    HESS, F

    1993-01-01

    A new viscoplastic model for the plastic stress-strain behaviour of f.c.c. metals is presented. In this model the strain hardening results from increasing dislocation densities. The observed stagnation of strain hardening after strain reversals is explained by a lowering of the increase in dislocati

  9. A new strain gage method for measuring the contractile strain ratio of Zircaloy tubing

    International Nuclear Information System (INIS)

    An improved strain gage method for determining the contractile strain ratio (CSR) of Zircaloy tubing was developed. The new method consists of a number of load-unload cyclings at approximately 0.2% plastic strain interval. With this method the CSR of Zircaloy-4 tubing could be determined accurately because it was possible to separate the plastic strains from the elastic strain involvement. The CSR values determined by use of the new method were in good agreement with those calculated from conventional post-test manual measurements. The CSR of the tubing was found to decrease with the amount of deformation during testing because of uneven plastic flow in the gage section. A new technique of inscribing gage marks by use of a YAG laser is discussed. (orig.)

  10. Strain hardening and ductility of iron: axisymmetric vs. plane strain elongation. Technical progress report

    Energy Technology Data Exchange (ETDEWEB)

    Langford, G.

    1979-05-01

    The strain hardening of iron at high strains in plane strain elongation (strip drawing) is shown to fall increasngly below that of drawn iron wires at true strains above 2. This makes it unnecessary to invoke shear band formation simultaneously as a strengthening mechanism and as a ductility reducing mechanism in the drawn strip. Rather, shear bands may be a weakening mechanism in all contexts. A set of specimens of interstitial-free iron deformed in three of the four main classifications of deformation symmetry (wire, strip, and chips, representing axisymmetric elongation, plane strain elongation, and pure shear) has been prepared in the form of mechanical test specimens and thin foils for high resolution selected area diffraction. A simple technique for rapid discovery of the <110> axis of foils of strongly textured bcc wire has been worked out.

  11. The asymptomatic bacteriuria Escherichia coli strain 83972 outcompetes uropathogenic E. coli strains in human urine

    DEFF Research Database (Denmark)

    Hancock, Viktoria; Ulett, G.C.; Schembri, M.A.;

    2006-01-01

    Escherichia coli is the most common organism associated with asymptomatic bacteriuria (ABU). In contrast to uropathogenic E. coli (UPEC), which causes symptomatic urinary tract infections (UTI), very little is known about the mechanisms by which these strains colonize the human urinary tract...... to conventional therapy. Colonization with strain 83972 appears to prevent infection with UPEC strains in such patients despite the fact that this strain is unable to express the primary adhesins involved in UTI, viz. P and type 1 fimbriae. Here we investigated the growth characteristics of E. coli 83972 in human...... urine and show that it can outcompete a representative spectrum of UPEC strains for growth in urine. The unique ability of ABU E. coli 83972 to outcompete UPEC in urine was also demonstrated in a murine model of human UTI, confirming the selective advantage over UPEC in vivo. Comparison of global gene...

  12. Developments of borehole strain observation outside China

    Institute of Scientific and Technical Information of China (English)

    邱泽华; 石耀霖

    2004-01-01

    Borehole strain observation is playing an increasingly important role in the study on the crustal movements. It hasbeen used by many countries such as China, USA, Japan, Peru, Australia, South Africa, Iceland and Italy, in research fields of plate tectonics, earthquake, volcanic eruption, dam safety, oil field subsidence, mining collapse andso on. Borehole strainmeter has been improved rapidly and tends to get more and more components included inone probe. Based on observations by this kind of instruments, studies on seismic strain step, slow earthquake,earthquake precursor and volcanic eruption forecasting have made remarkable achievements. In the coming years,borehole strain observation is going to become one major geodetic means, together with GPS and InSAR.

  13. Influence of nuclear radiation on strain gauges

    Energy Technology Data Exchange (ETDEWEB)

    Andreae, G.; Niessen, G.

    The examination of safety of nuclear reactor components requires strain measurements on parts of constructions while operating and this means when influenced by nuclear radiation. As strain gauges are the most applied devices for strain measurement and very suitable in respect to their handling, the influence of nuclear radiation has been investigated for the first time more than 30 years ago in order to obtain information on the reliability of measuring results in such difficult environmental conditions. Since that time only some papers have been published dealing with the progress in this field of measuring technics. A generally valid statement however could not be obtained yet. The effect of 10 MeV electron irradiation on the specific resistivity has been studied.

  14. Influence of nuclear radiation on strain gauges

    International Nuclear Information System (INIS)

    The examination of safety of nuclear reactor components requires strain measurements on parts of constructions while operating and this means when influenced by nuclear radiation. As strain gauges are the most applied devices for strain measurement and very suitable in respect to their handling, the influence of nuclear radiation has been investigated for the first time more than 30 years ago in order to obtain information on the reliability of measuring results in such difficult environmental conditions. Since that time only some papers have been published dealing with the progress in this field of measuring technics. A generally valid statement however could not be obtained yet. The effect of 10 MeV electron irradiation on the specific resistivity has been studied. (orig./HP)

  15. Nuclear transplantation in different strains of zebrafish

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Single later blastula nuclei from AB strain of zebrafish (Danio rerio) were transplanted into enucleated unfertilized eggs of Long fin strain. Of 1119 cloning embryos, 14 reconstructed embryos developed into fry. DNA fingerprinting systems of the cloned fish were similar to those of the nuclear donor fish, but were distinctly different from those of the nuclear recipient fish. It confirmed that the genetic material originated from nuclear donor cell other than from nuclear recipient egg. The research suggested that the basic technique for nuclear transplantation performed with different strains of zebrafish has made a breakthrough. It should be helpful for the study of some important developmental problems such as gene function, the regulation of gene expression during animal development, the developmental potential of a nucleus and the interactions between the donor nucleus and the recipient cytoplasm, etc.

  16. Survival and activity of individual bioaugmentation strains

    DEFF Research Database (Denmark)

    Dueholm, Morten Simonsen; G. Marquesa, Irina; Karst, Søren Michael;

    2015-01-01

    Successful application of bioaugmentation for enhanced degradation of environmental pollutants is often limited by the lack of methods to monitor the survival and activity of individual bioaugmentation strains. However, recent advancements in sequencing technologies and molecular techniques now...... allow us to address these limitations. Here a complementing set of general applicable molecular methods are presented that provides detailed information on the performance of individual bioaugmentation strains under in situ conditions. The approach involves genome sequencing to establish highly specific...... qPCR and RT-qPCR tools for cell enumerations and expression of involved genes, stable isotope probing to follow growth on the target compounds and GFP-tagging to visualize the bioaugmentation strains directly in samples, all in combination with removal studies of the target compounds. The concept...

  17. Development of Industrial Yeast Platform Strains

    DEFF Research Database (Denmark)

    Bergdahl, Basti; Dato, Laura; Förster, Jochen

    2014-01-01

    frequently encounter high substrate concentrations, low pH, high temperatures and various inhibitory compounds originating either from the raw material used or from cellular metabolism. The aim of this research project is to develop robust platform strains of Saccharomyces cerevisiae based on industrial...... main tasks that are interconnected to reach the final goal (Fig. 1).It is highly multidisciplinary and involves several research fields. In this communication, we will present selected results from ongoing activities, such as the whole genomes equencing, intracellular metabolite profiling and tolerance...... screening of the 36 industrial and laboratory yeast strains. In addition, progress in the development of molecular biology methods for generating the new strains will be presented....

  18. High sensitivity knitted fabric strain sensors

    Science.gov (United States)

    Xie, Juan; Long, Hairu; Miao, Menghe

    2016-10-01

    Wearable sensors are increasingly used in smart garments for detecting and transferring vital signals and body posture, movement and respiration. Existing fabric strain sensors made from metallized yarns have low sensitivity, poor comfort and low durability to washing. Here we report a knitted fabric strain sensor made from a cotton/stainless steel (SS) fibre blended yarn which shows much higher sensitivity than sensors knitted from metallized yarns. The fabric feels softer than pure cotton textiles owing to the ultrafine stainless steel fibres and does not lose its electrical property after washing. The reason for the high sensitivity of the cotton/SS knitted fabric sensor was explored by comparing its sensing mechanism with the knitted fabric sensor made from metallized yarns. The results show that the cotton/SS yarn-to-yarn contact resistance is highly sensitive to strain applied to hooked yarn loops.

  19. Realization of a Strained Atomic Wire Superlattice.

    Science.gov (United States)

    Song, Inkyung; Goh, Jung Suk; Lee, Sung-Hoon; Jung, Sung Won; Shin, Jin Sung; Yamane, Hiroyuki; Kosugi, Nobuhiro; Yeom, Han Woong

    2015-11-24

    A superlattice of strained Au-Si atomic wires is successfully fabricated on a Si surface. Au atoms are known to incorporate into the stepped Si(111) surface to form a Au-Si atomic wire array with both one-dimensional (1D) metallic and antiferromagnetic atomic chains. At a reduced density of Au, we find a regular array of Au-Si wires in alternation with pristine Si nanoterraces. Pristine Si nanoterraces impose a strain on the neighboring Au-Si wires, which modifies both the band structure of metallic chains and the magnetic property of spin chains. This is an ultimate 1D version of a strained-layer superlattice of semiconductors, defining a direction toward the fine engineering of self-assembled atomic-scale wires. PMID:26446292

  20. Comparison of barley stripe mosaic virus strains.

    Science.gov (United States)

    Hafez, Elsayed E; Abdel Aleem, Engy E; Fattouh, Faiza A

    2008-01-01

    BSMV (barley stripe mosaic virus) particles were obtained in a pure state from infected host plant tissues of Hordeum vulgare. The three genomic parities (alpha, beta and gamma) were amplified by PCR using specific primers for each particle; each was cloned. Partial sequence of the alpha, beta and gamma segments was determined for the Egyptian isolate of barley stripe mosaic virus (BSMV AE1). Alignment of nucleotide sequences with that of other known strains of the virus, BSMV type strains (CV17, ND18 and China), and the generation of phylogenetic trees was performed. A low level of homology was detected comparing 467 bp of the a and 643 bp of the segments to that of the other strains, and thus BSMV alpha and beta segments were in separate clusters. However, 1154 bp of the gamma segments of BSMV AE1 showed a high level of homology especially to strain BSMV ND18, as they both formed a distinct cluster. Northern blotting of pure BSMV AE1 virus and H. vulgare-infected tissue were compared using an alpha ND18 specific probe. Western blotting using antibodies specific for the coat protein (CP) and the triple gene block 1 (TGB1) protein, which are both encoded by the beta ND18 segment, still indicated a high level of similarity between proteins produced by BSMV ND18 and AE1. We suggest that the BSMV AE1 isolate is a distinct strain of BSMV which reflects the genetic evolutionary divergence among BSMV strains and members of the Hordeivirus group. PMID:18533473

  1. Gate leakage mechanisms in strained Si devices

    Science.gov (United States)

    Yan, L.; Olsen, S. H.; Kanoun, M.; Agaiby, R.; O'Neill, A. G.

    2006-11-01

    This work investigates gate leakage mechanisms in advanced strained Si /SiGe metal-oxide-semiconductor field-effect transistor (MOSFET) devices. The impact of virtual substrate Ge content, epitaxial material quality, epitaxial layer structure, and device processing on gate oxide leakage characteristics are analyzed in detail. In state of the art MOSFETs, gate oxides are only a few nanometers thick. In order to minimize power consumption, leakage currents through the gate must be controlled. However, modifications to the energy band structure, Ge diffusion due to high temperature processing, and Si /SiGe material quality may all affect gate oxide leakage in strained Si devices. We show that at high oxide electric fields where gate leakage is dominated by Fowler-Nordheim tunneling, tensile strained Si MOSFETs exhibit lower leakage levels compared with bulk Si devices. This is a direct result of strain-induced splitting of the conduction band states. However, for device operating regimes at lower oxide electric fields Poole-Frenkel emissions contribute to strained Si gate leakage and increase with increasing virtual substrate Ge content. The emissions are shown to predominantly originate from surface roughness generating bulk oxide traps, opposed to Ge diffusion, and can be improved by introducing a high temperature anneal. Gate oxide interface trap density exhibits a dissimilar behavior and is highly sensitive to Ge atoms at the oxidizing surface, degrading with increasing thermal budget. Consequently advanced strained Si /SiGe devices are inadvertently subject to a potential tradeoff between power consumption (gate leakage current) and device reliability (gate oxide interface quality).

  2. Variability among Rhizobium Strains Originating from Nodules of Vicia faba.

    Science.gov (United States)

    van Berkum, P; Beyene, D; Vera, F T; Keyser, H H

    1995-07-01

    Rhizobium strains from nodules of Vicia faba were diverse in plasmid content and serology. Results of multilocus gel electrophoresis and restriction fragment length polymorphism indicated several deep chromosomal lineages among the strains. Linkage disequilibrium among the chromosomal types was detected and may have reflected variation of Rhizobium strains in the different geographical locations from which the strains originated. An investigation of pea strains with antibodies prepared against fava bean strains and restriction fragment length polymorphism analyses, targeting DNA regions coding for rRNA and nodulation, indicated that Rhizobium strains from V. faba nodules were distinguishable from those from Pisum sativum, V. villosa, and Trifolium spp. PMID:16535075

  3. Tensile Properties of TWIP Steel at High Strain Rate

    Institute of Scientific and Technical Information of China (English)

    XIONG Rong-gang; FU Ren-yu; SU Yu; LI Qian; WEI Xi-cheng; LI Lin

    2009-01-01

    Tensile tests of TWIP steels of two compositions are performed in the strain rate range of 10-5 -103 s-1.Results indicate that steel 1# does not exhibit TWIP effect but deformation-induced martensitic transformation appears only.There exists TWIP effect in steel 3#.Tensile properties at room temperature are sensitive to strain rate in the studied strain rate ranges.Analysis on the relationship between strain-hardening exponent and strain rates shows that strain-induced martensitic transformation and formation of twins during deformation have significant influence on their strain-hardening behavior.

  4. Digital Eye Strain Reduction Techniques: A Review

    Directory of Open Access Journals (Sweden)

    PREETHI J SEEGEHALLI

    2016-03-01

    Full Text Available Digital eye strain or computer vision syndrome (CVS is caused when we spend considerable amount of time in staring at digital screens of desktop computer, laptop, e-readers, tablets and mobile phones. This paper discusses the different the causes for visual fatigue and digital eye strain reduction techniques like usage of optical glass, flicker free screen, color filtering, fuzzy logic based brightness adaption technique, bias lighting screens, optimizing monitor’s color temperature and Auto brightness control of digital screen. The paper also discusses the good practices to reduce visual fatigue.

  5. Genome sequence of Haemophilus parasuis strain 29755

    OpenAIRE

    Mullins, Michael A.; Register, Karen B.; Bayles, Darrell O; Dyer, David W.; Joanna S Kuehn; Phillips, Gregory J.

    2011-01-01

    Haemophilus parasuis is a member of the family Pasteurellaceae and is the etiologic agent of Glässer’s disease in pigs, a systemic syndrome associated with only a subset of isolates. The genetic basis for virulence and systemic spread of particular H. parasuis isolates is currently unknown. Strain 29755 is an invasive isolate that has long been used in the study of Glässer’s disease. Accordingly, the genome sequence of strain 29755 is of considerable importance to investigators endeavoring to...

  6. Cells as strain-cued automata

    Science.gov (United States)

    Cox, Brian N.; Snead, Malcolm L.

    2016-02-01

    We argue in favor of representing living cells as automata and review demonstrations that autonomous cells can form patterns by responding to local variations in the strain fields that arise from their individual or collective motions. An autonomous cell's response to strain stimuli is assumed to be effected by internally-generated, internally-powered forces, which generally move the cell in directions other than those implied by external energy gradients. Evidence of cells acting as strain-cued automata have been inferred from patterns observed in nature and from experiments conducted in vitro. Simulations that mimic particular cases of pattern forming share the idealization that cells are assumed to pass information among themselves solely via mechanical boundary conditions, i.e., the tractions and displacements present at their membranes. This assumption opens three mechanisms for pattern formation in large cell populations: wavelike behavior, kinematic feedback in cell motility that can lead to sliding and rotational patterns, and directed migration during invasions. Wavelike behavior among ameloblast cells during amelogenesis (the formation of dental enamel) has been inferred from enamel microstructure, while strain waves in populations of epithelial cells have been observed in vitro. One hypothesized kinematic feedback mechanism, "enhanced shear motility", accounts successfully for the spontaneous formation of layered patterns during amelogenesis in the mouse incisor. Directed migration is exemplified by a theory of invader cells that sense and respond to the strains they themselves create in the host population as they invade it: analysis shows that the strain fields contain positional information that could aid the formation of cell network structures, stabilizing the slender geometry of branches and helping govern the frequency of branch bifurcation and branch coalescence (the formation of closed networks). In simulations of pattern formation in

  7. Development of inkjet printed strain sensors

    International Nuclear Information System (INIS)

    Strain sensors with different architectures, such as single sensors, sensor arrays and a sensor matrix have been developed by inkjet printing technology. Sensors with gauge factors up to 2.48, dimensions of 1.5 mm × 1.8 mm and interdigitated structures with a distance of 30 μm between the finger lines have been achieved based on PeDOT (poly(3,4-ethylenedioxythiophene) and conductive ink. Strain gauges based on silver ink have also been achieved with a gauge factor of 0.35. Performance tests including 1000 mechanical cycles have been successfully carried out for the development of smart prosthesis applications. (paper)

  8. Tensile strain mapping in flat germanium membranes

    Energy Technology Data Exchange (ETDEWEB)

    Rhead, S. D., E-mail: S.Rhead@warwick.ac.uk; Halpin, J. E.; Myronov, M.; Patchett, D. H.; Allred, P. S.; Wilson, N. R.; Leadley, D. R. [Department of Physics, University of Warwick, Coventry, CV4 7AL (United Kingdom); Shah, V. A. [Department of Physics, University of Warwick, Coventry, CV4 7AL (United Kingdom); Department of Engineering, University of Warwick, Coventry, CV4 7AL (United Kingdom); Kachkanov, V.; Dolbnya, I. P. [Diamond Light Source, Harwell Science and Innovation Campus, Didcot, Oxfordshire, OX11 0DE (United Kingdom); Reparaz, J. S. [ICN2 - Institut Catala de Nanociencia i Nanotecnologia, Campus UAB, 08193 Bellaterra (Barcelona) (Spain); Sotomayor Torres, C. M. [ICN2 - Institut Catala de Nanociencia i Nanotecnologia, Campus UAB, 08193 Bellaterra (Barcelona) (Spain)

    2014-04-28

    Scanning X-ray micro-diffraction has been used as a non-destructive probe of the local crystalline quality of a thin suspended germanium (Ge) membrane. A series of reciprocal space maps were obtained with ∼4 μm spatial resolution, from which detailed information on the strain distribution, thickness, and crystalline tilt of the membrane was obtained. We are able to detect a systematic strain variation across the membranes, but show that this is negligible in the context of using the membranes as platforms for further growth. In addition, we show evidence that the interface and surface quality is improved by suspending the Ge.

  9. Tensile strain mapping in flat germanium membranes

    International Nuclear Information System (INIS)

    Scanning X-ray micro-diffraction has been used as a non-destructive probe of the local crystalline quality of a thin suspended germanium (Ge) membrane. A series of reciprocal space maps were obtained with ∼4 μm spatial resolution, from which detailed information on the strain distribution, thickness, and crystalline tilt of the membrane was obtained. We are able to detect a systematic strain variation across the membranes, but show that this is negligible in the context of using the membranes as platforms for further growth. In addition, we show evidence that the interface and surface quality is improved by suspending the Ge

  10. Development of inkjet printed strain sensors

    Science.gov (United States)

    Correia, V.; Caparros, C.; Casellas, C.; Francesch, L.; Rocha, J. G.; Lanceros-Mendez, S.

    2013-10-01

    Strain sensors with different architectures, such as single sensors, sensor arrays and a sensor matrix have been developed by inkjet printing technology. Sensors with gauge factors up to 2.48, dimensions of 1.5 mm × 1.8 mm and interdigitated structures with a distance of 30 μm between the finger lines have been achieved based on PeDOT (poly(3,4-ethylenedioxythiophene) and conductive ink. Strain gauges based on silver ink have also been achieved with a gauge factor of 0.35. Performance tests including 1000 mechanical cycles have been successfully carried out for the development of smart prosthesis applications.

  11. Forty mouse strain survey of body composition

    OpenAIRE

    Danielle R Reed; Bachmanov, Alexander A.; Tordoff, Michael G.

    2007-01-01

    We measured body weight and composition of ~10 male and ~10 female mice from 40 inbred strains. Body composition was assessed in ~16-wk old mice that had been individually housed and fed a high-carbohydrate, low-fat diet (AIN-76A) for the previous 8 wk. Carcass lean and fat weights were assessed using a PIXIMus II DEXA and confirmed by fat extraction assay. There was a nearly continuous range of body weights, from a strain mean±SE of 11.4±0.2 g (MSM/MsJ) to 39.3±1.8 g (NON/LtJ). The percentag...

  12. Serological Strains of Tobacco Ringspot Virus Transmitted by Xiphinema americanum.

    Science.gov (United States)

    Rush, M C

    1970-07-01

    Five serological strains of tobacco ringspot virus isolated from naturally infected tobacco in North Carolina, and a strain isolated from watermelon in the Rio Grande Valley of Texas were transmitted from cucumber to cucumber by mass-screened and handpicked Xiphinerna americanum from North Carolina. The Eucharis mottle strain from Peru was not transmitted, indicating that a specific strain-vector relationship may exist between the geographically isolated strains from North and South America.

  13. Reliability of PEDOT-PSS Strain Gauge on foam structure

    OpenAIRE

    Chang, Cheng-Ling; Fix, Kayla; Wang, Wei-Chih

    2010-01-01

    Reliability is one important issue in using PEDOT: PSS as a strain gauge for large strain measurements. In our research, PEDOT: PSS strain gauge is fabricated on the polyurethane and porous substrate, which enhances the mechanical property when large strain and cyclic loads are applied to it. Our result shows that with the polyurethane as the substrate adhesion layer, the strain of PEDOT: PSS can go up to 17.7% and stabilize without reference resistance drifting.

  14. A Wireless Strain Sensor Network for Structural Health Monitoring

    OpenAIRE

    Chengyin Liu; Jun Teng; Ning Wu

    2015-01-01

    Structural strain under external environmental loads is one of the main monitoring parameters in structural health monitoring or dynamic tests. This paper presents a wireless strain sensor network (WSSN) design for monitoring structural dynamic strain field. A precision strain sensor board is developed and integrated with the IRIS mote hardware/software platform for multichannel strain gauge signal conditioning and wireless monitoring. Measurement results confirm the sensor’s functionality re...

  15. Two-Dimensional Laser-Speckle Surface-Strain Gauge

    Science.gov (United States)

    Barranger, John P.; Lant, Christian

    1992-01-01

    Extension of Yamaguchi's laser-speckle surface-strain-gauge method yields data on two-dimensional surface strains in times as short as fractions of second. Laser beams probe rough spot on surface of specimen before and after processing. Changes in speckle pattern of laser light reflected from spot indicative of changes in surface strains during processing. Used to monitor strains and changes in strains induced by hot-forming and subsequent cooling of steel.

  16. Design of Monolithic Integrator for Strain-to-Frequency Converter

    OpenAIRE

    Tuan Mohd. Khairi Tuan Mat; Chew Sue Ping; Akram Abdul Azid

    2012-01-01

    Strain-to-Frequency converter (SFC) is a one of the analog conditioner tools that converts any strain signal to the frequency signal. The basic concept of SFC is by detecting any changing of strains, then converting the strain to the voltage signal and converting the voltage signal to the frequency signal. This tool consists of 3 main  components which are strain gauge, differential integrator and comparator. This paper presents the designing and analysis of monolithic integrator that to be u...

  17. Variability among Rhizobium Strains Originating from Nodules of Vicia faba

    OpenAIRE

    van Berkum, P; Beyene, D; Vera, F. T.; Keyser, H. H.

    1995-01-01

    Rhizobium strains from nodules of Vicia faba were diverse in plasmid content and serology. Results of multilocus gel electrophoresis and restriction fragment length polymorphism indicated several deep chromosomal lineages among the strains. Linkage disequilibrium among the chromosomal types was detected and may have reflected variation of Rhizobium strains in the different geographical locations from which the strains originated. An investigation of pea strains with antibodies prepared agains...

  18. GENDER, CUMULATIVE STRAIN AND DEVIANT BEHAVIOR IN TURKEY

    OpenAIRE

    Özbay, Özden

    2013-01-01

     ABSTRACTThe purpose of this study is to explore whether General Strain Theory played a similar role for male and female deviant acts among the youths in Turkey. Data was derived from 974 students at a Turkish public university. The findings indicated that cumulative strain, anger, and criminal and non-criminal copings played similar roles for both males and females. The results questioned General Strain Theory’s gender difference thesis.Keywords: General strain theory, cumulative strain, gen...

  19. Entire deformational characteristics and strain localization of jointed rock specimen in plane strain compression

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Shear band (SB),axial, lateral and volumetric strains as well as Poisson's ratio of anisotropic jointed rock specimen (JRS) were modeled by Fast Lagrangian Analysis of Continua (FLAC). Failure criterion of rock was a composited Mohr-Coulomb criterion with tension cut-off. An inclined joint was treated as square elements of ideal plastic material beyond the peak strength. Several FISH functions were written to automatically find the addresses of elements in the joint and to calculate the entire deformational characteristics of plane strain JRS. The results show that for moderate joint inclination (JI), strain is only concentrated into the joint governing the behavior of JRS,leading to ideal plastic responses in axial and lateral directions. For higher JI, the post-peak stress-axial and lateral strain curves become steeper as JI increases owing to the increase of new SB's length. Lateral expansion and precursor to the unstable failure are the most apparent, resulting in the highest Poisson's ratio and even negative volumetric strain. For lower JI, the entire post-peak deformational characteristics are independent of JI. The lowest lateral expansion occurs, leading to the lowest Poisson's ratio and positive volumetric strain all along. The present prediction on anisotropic strength in plane strain compression qualitatively agrees with the results in triaxial tests of rocks.The JI calculated by Jaeger's formula overestimates that related to the minimum strength. Advantages of the present numerical model over the Jaeger's model are pointed out.

  20. Probiotic Potential of Lactobacillus Strains with Antimicrobial Activity against Some Human Pathogenic Strains

    Directory of Open Access Journals (Sweden)

    Parisa Shokryazdan

    2014-01-01

    Full Text Available The objective of this study was to isolate, identify, and characterize some lactic acid bacterial strains from human milk, infant feces, and fermented grapes and dates, as potential probiotics with antimicrobial activity against some human pathogenic strains. One hundred and forty bacterial strains were isolated and, after initial identification and a preliminary screening for acid and bile tolerance, nine of the best isolates were selected and further identified using 16 S rRNA gene sequences. The nine selected isolates were then characterized in vitro for their probiotic characteristics and their antimicrobial activities against some human pathogens. Results showed that all nine isolates belonged to the genus Lactobacillus. They were able to tolerate pH 3 for 3 h, 0.3% bile salts for 4 h, and 1.9 mg/mL pancreatic enzymes for 3 h. They exhibited good ability to attach to intestinal epithelial cells and were not resistant to the tested antibiotics. They also showed good antimicrobial activities against the tested pathogenic strains of humans, and most of them exhibited stronger antimicrobial activity than the reference strain L. casei Shirota. Thus, the nine Lactobacillus strains could be considered as potential antimicrobial probiotic strains against human pathogens and should be further studied for their human health benefits.

  1. On Boreholes and PBO Borehole Strain

    Science.gov (United States)

    Gladwin, M. T.; Mee, M. W.

    2003-12-01

    Borehole tensor strainmeters (GTSM) installed in Australia and California have established a baseline of data spanning more than twenty years. The current baseline of data allows characterisation of a moderate number of instruments in a range of very different environments in a way which defines reasonable performance expectations for the upcoming PBO deployments. A generic understanding of effects which result from the process of installation of the instrument in a stressed rock mass emerges. This indicates that, provided due allowance is made for experimentally determined borehole recovery effects, the contribution of borehole strain meters more than adequately fills the observational gap between high stability/long term geodetic measurements of strain and strain rates and high resolution/high frequency seismic observations of earth deformation processes. The various strain relief processes associated with the installation procedures and borehole recovery effects associated with pre-existing stress fields will be documented. Procedures for calibration of the total borehole inclusion and for progressive removal of effects due to rock anisotropy and visco-elastic creep of the grout and rock close to the borehole from far field tectonic effects will be defined and illustrated with examples. Observed deviations from these processes will be shown to be small and consistent with otherwise observed or implied fault motions. Full details of these borehole induced processes are, however, difficult to determine in the early years following installation, particularly if there is significant tectonic activity at the time. Once quantified for each site, the effects can be robustly removed from data streams.

  2. High strain rate behaviour of polypropylene microfoams

    Science.gov (United States)

    Gómez-del Río, T.; Garrido, M. A.; Rodríguez, J.; Arencón, D.; Martínez, A. B.

    2012-08-01

    Microcellular materials such as polypropylene foams are often used in protective applications and passive safety for packaging (electronic components, aeronautical structures, food, etc.) or personal safety (helmets, knee-pads, etc.). In such applications the foams which are used are often designed to absorb the maximum energy and are generally subjected to severe loadings involving high strain rates. The manufacture process to obtain polymeric microcellular foams is based on the polymer saturation with a supercritical gas, at high temperature and pressure. This method presents several advantages over the conventional injection moulding techniques which make it industrially feasible. However, the effect of processing conditions such as blowing agent, concentration and microfoaming time and/or temperature on the microstructure of the resulting microcellular polymer (density, cell size and geometry) is not yet set up. The compressive mechanical behaviour of several microcellular polypropylene foams has been investigated over a wide range of strain rates (0.001 to 3000 s-1) in order to show the effects of the processing parameters and strain rate on the mechanical properties. High strain rate tests were performed using a Split Hopkinson Pressure Bar apparatus (SHPB). Polypropylene and polyethylene-ethylene block copolymer foams of various densities were considered.

  3. Division Heads and Role Strain Perception.

    Science.gov (United States)

    Simpson, William M.

    1984-01-01

    Reports on a study of the extent to which ambiguous and conflicting circumstances contribute to role strain perceptions among community college division heads. Clarifies how working conditions and personal attributes affect job expectations. Finds experience, age, outlook, and job satisfaction to be strong influential factors. (DMM)

  4. A novel limiting strain energy strength theory

    Institute of Scientific and Technical Information of China (English)

    LIU Guang-lian

    2009-01-01

    With applied dislocation theory,the effects of shear and normal stresses on the slide and climb motions at the same section of a crystal were analyzed.And,based on the synergetic effect of both normal and shear strain specific energies,the concept of the total equivalent strain specific energy (TESSE) at an oblique section and a new strength theory named as limiting strain energy strength theory (LSEST) were proposed.As for isotropic materials,the plastic yielding or brittle fracture of under uniaxial stress state would occur when the maximum TESSE reached the strain specific energy,also the expressions on the equivalent stresses and a function of failure of the LSEST under different principal stress states were obtained.Relationship formulas among the tensile,compressive and shear yield strengths for plastic metals were derived.These theoretical predictions,according to the LSEST,were consistent very well with experiment results of tensile,compressive and torsion tests of three plastic metals and other experiment results from open literatures.This novel LSEST might also help for strength calculation of other materials.

  5. Thermal Strain Analysis of Optic Fiber Sensors

    Directory of Open Access Journals (Sweden)

    Chih-Ying Huang

    2013-01-01

    Full Text Available An optical fiber sensor surface bonded onto a host structure and subjected to a temperature change is analytically studied in this work. The analysis is developed in order to assess the thermal behavior of an optical fiber sensor designed for measuring the strain in the host structure. For a surface bonded optical fiber sensor, the measuring sensitivity is strongly dependent on the bonding characteristics which include the protective coating, adhesive layer and the bonding length. Thermal stresses can be generated due to a mismatch of thermal expansion coefficients between the optical fiber and host structure. The optical fiber thermal strain induced by the host structure is transferred via the adhesive layer and protective coating. In this investigation, an analytical expression of the thermal strain and stress in the optical fiber is presented. The theoretical predictions are validated using the finite element method. Numerical results show that the thermal strain and stress are linearly dependent on the difference in thermal expansion coefficients between the optical fiber and host structure and independent of the thermal expansion coefficients of the adhesive and coating.

  6. High strain rate behaviour of polypropylene microfoams

    Directory of Open Access Journals (Sweden)

    Martínez A.B.

    2012-08-01

    Full Text Available Microcellular materials such as polypropylene foams are often used in protective applications and passive safety for packaging (electronic components, aeronautical structures, food, etc. or personal safety (helmets, knee-pads, etc.. In such applications the foams which are used are often designed to absorb the maximum energy and are generally subjected to severe loadings involving high strain rates. The manufacture process to obtain polymeric microcellular foams is based on the polymer saturation with a supercritical gas, at high temperature and pressure. This method presents several advantages over the conventional injection moulding techniques which make it industrially feasible. However, the effect of processing conditions such as blowing agent, concentration and microfoaming time and/or temperature on the microstructure of the resulting microcellular polymer (density, cell size and geometry is not yet set up. The compressive mechanical behaviour of several microcellular polypropylene foams has been investigated over a wide range of strain rates (0.001 to 3000 s−1 in order to show the effects of the processing parameters and strain rate on the mechanical properties. High strain rate tests were performed using a Split Hopkinson Pressure Bar apparatus (SHPB. Polypropylene and polyethylene-ethylene block copolymer foams of various densities were considered.

  7. Strain intermittency in shape-memory alloys

    Science.gov (United States)

    Balandraud, Xavier; Barrera, Noemi; Biscari, Paolo; Grédiac, Michel; Zanzotto, Giovanni

    2015-05-01

    We study experimentally the intermittent progress of the mechanically induced martensitic transformation in a Cu-Al-Be single crystal through a full-field measurement technique: the grid method. We utilize an in-house, specially designed gravity-based device, wherein a system controlled by water pumps applies a perfectly monotonic uniaxial load through very small force increments. The sample exhibits hysteretic superelastic behavior during the forward and reverse cubic-monoclinic transformation, produced by the evolution of the strain field of the phase microstructures. The in-plane linear strain components are measured on the sample surface during the loading cycle, and we characterize the strain intermittency in a number of ways, showing the emergence of power-law behavior for the strain avalanching over almost six decades of magnitude. We also describe the nonstationarity and the asymmetry observed in the forward versus reverse transformation. The present experimental approach, which allows for the monitoring of the reversible martensitic transformation both locally and globally in the crystal, proves useful and enhances our capabilities in the analysis and possible control of transition-related phenomena in shape-memory alloys.

  8. Charge and Strain Control of Interface Magnetism

    Science.gov (United States)

    Fitzsimmons, M. R.; Dumesnil, K.; Jaouen, N.; Maroutian, T.; Agnus, G.; Tonnerre, J.-M.; Kirby, B.; Fohtung, E.; Holladay, B.; Fullerton, E. E.; Shpyrko, O.; Sinha, S. K.; Wang, Q.; Chen, A.; Jia, Q. X.

    2015-03-01

    We studied the influence of an electric field applied to an La0.67Sr0.33MnO3 (LSMO) layer in a LSMO/Pb(Zr0.2Ti0.8) O3 (PZT)/Nb-doped SrTiO3 (STO) heterostructure by measuring its magnetization depth profile using resonant x-ray magnetic reflectivity. The saturation magnetization of the ferromagnetically-ordered LSMO was not affected by the direction of the polarization of the PZT. However, the ferromagnetic thickness and magnetization of the LSMO film at remanence were reduced for hole-charge accumulation at the LSMO/PZT interface. To understand the independent roles of strain and hole-doping, we performed neutron scattering experiments of La0.8Sr0.2MnO3 films grown on Nb-doped STO in which bending strain (via 4-point bending jig) or electric field (via parallel plate capacitor) was applied to the films. We observed that bending strain affects the saturation magnetization of the LSMO film, whereas electric field affects the remanent magnetization of the film. These observations suggest strain may be a more effective means to control magnetism than charge. This work has benefited from use of CINT(LANL), NIST Center for Neutron Research and the Synchrotron SOLEIL and funding from LANL/LDRD program, DOE-BES (UCSD) and DOD (NMSU).

  9. Prediction of swelling rocks strain in tunneling

    Science.gov (United States)

    Parsapour, D.; Fahimifar, A.

    2016-05-01

    Swelling deformations leading to convergence of tunnels may result in significant difficulties during the construction, in particular for long term use of tunnels. By extracting an experimental based explicit analytical solution for formulating swelling strains as a function of time and stress, swelling strains are predicted from the beginning of excavation and during the service life of tunnel. Results obtained from the analytical model show a proper agreement with experimental results. This closed-form solution has been implemented within a numerical program using the finite element method for predicting time-dependent swelling strain around tunnels. Evaluating effects of swelling parameters on time-dependent strains and tunnel shape on swelling behavior around the tunnel according to this analytical solution is considered. The ground-support interaction and consequent swelling effect on the induced forces in tunnel lining is considered too. Effect of delay in lining installation on swelling pressure which acting on the lining and its structural integrity, is also evaluated. A MATLAB code of " SRAP" is prepared and applied to calculate all swelling analysis around tunnels based on analytical solution.

  10. Thermal strain analysis of optic fiber sensors.

    Science.gov (United States)

    Her, Shiuh-Chuan; Huang, Chih-Ying

    2013-01-31

    An optical fiber sensor surface bonded onto a host structure and subjected to a temperature change is analytically studied in this work. The analysis is developed in order to assess the thermal behavior of an optical fiber sensor designed for measuring the strain in the host structure. For a surface bonded optical fiber sensor, the measuring sensitivity is strongly dependent on the bonding characteristics which include the protective coating, adhesive layer and the bonding length. Thermal stresses can be generated due to a mismatch of thermal expansion coefficients between the optical fiber and host structure. The optical fiber thermal strain induced by the host structure is transferred via the adhesive layer and protective coating. In this investigation, an analytical expression of the thermal strain and stress in the optical fiber is presented. The theoretical predictions are validated using the finite element method. Numerical results show that the thermal strain and stress are linearly dependent on the difference in thermal expansion coefficients between the optical fiber and host structure and independent of the thermal expansion coefficients of the adhesive and coating.

  11. Influence of nuclear radiation on strain gauges

    International Nuclear Information System (INIS)

    The influence of nuclear radiation on strain gauges is a superposition of a primary effect (generation of lattice defects resulting in an increase of resistance), a secondary effect (caused by radiation induced diffusion, which - depending on the material and its prior thermodynamic state - leads to a decrease or increase of resistance) and an after-effect (change of resistance after irradiation or between irradiations). The consequences of these effects depend on different parameters with mudual dependencies. Conclusion: Single strain gauges (quarter bridges) should not be used under nuclear radiation; the multitouch of - usually unknown - influence parameters makes a general prediction of the behaviour under radiation practically impossible. Particularly, it is impossible to apply methods such as choice of special materials or pretreatment procedures in order to get strain gauges for high radiation rates. Strain gauges in half-bridge configuration give - under optimum conditions a small difference of two large interfering quantities, which can hardly be estimated. Thus a prognosis of the performance under radiation remains doubtful. With 26 figs., 1 tab

  12. Revisiting the gauge fields of strained graphene

    Science.gov (United States)

    Iorio, Alfredo; Pais, Pablo

    2015-12-01

    We show that when graphene is only subject to strain, the spin connection gauge field that arises plays no measurable role, but when intrinsic curvature is present and strain is small, spin connection dictates most of the physics. We do so by showing that the Weyl field associated with strain is a pure gauge field and no constraint on the (2 +1 )-dimensional spacetime appears. On the other hand, for constant intrinsic curvature that also gives a pure gauge Weyl field, we find a classical manifestation of a quantum Weyl anomaly, descending from a constrained spacetime. We are in the position to do this because we find the equations that the conformal factor in (2 +1 ) dimensions has to satisfy, which is a nontrivial generalization to (2 +1 ) dimensions of the classic Liouville equation of the differential geometry of surfaces. Finally, we comment on the peculiarities of the only gauge field that can describe strain, the well-known pseudogauge field A1˜u11-u22 and A2˜u12 , and conclude by offering some scenarios in fundamental physics that this peculiar field could help to realize.

  13. Aligned carbon nanotube sheet piezoresistive strain sensors

    Science.gov (United States)

    Li, Ang; Bogdanovich, Alexander E.; Bradford, Philip D.

    2015-09-01

    Carbon nanotubes (CNTs) have a unique set of properties that may be useful in the production of next generation structural health monitoring composites. This research introduces a novel CNT based material system for strain and damage sensing applications. An aligned sheet of interconnected CNTs was drawn from a chemical vapor deposition grown CNT array and then bonded to the surface of glass fiber/epoxy composite coupons. Various types of mechanical tests were conducted, accompanied by real-time electrical data acquisition, in order to evaluate the electro-mechanical behavior of the developed sensing material. Specimens were loaded in the longitudinal and transverse CNT sheet orientations to investigate the anisotropy of the piezoresistive effect. The CNT sheets exhibited good sensing stability, linearity, sensitivity and repeatability within a practical strain range; which are crucial sensor features for health monitoring. It was also demonstrated that the CNT orientation in the sheet had a dramatic effect on the sensitivity, thus validating the usefulness of this sensing material for directional strain/damage monitoring. Finally, pre-straining of the CNT sheet sensors was conducted to further enhance the linearity of electro-mechanical response and long-term stability of the sensors during cyclic loading.

  14. Storage features of Lactobacillus Brevis strain 9

    Directory of Open Access Journals (Sweden)

    Utemurat Sagyndykov

    2013-03-01

    Full Text Available Current article presents the results of the research conducted on storing lactic bacteria. On the basis of results of experiments on liophilization of the culture of lactic bacteria Lactobacillus brevis strain №9, it has been concluded that the optimum way of storing the given culture is the method of liophilic drying with the vacuum soldering.

  15. Photonic skin for pressure and strain sensing

    Science.gov (United States)

    Chen, Xianfeng; Zhang, C.; van Hoe, B.; Webb, D. J.; Kalli, K.; van Steenberge, G.; Peng, G.-D.

    2010-04-01

    In this paper, we report on the strain and pressure testing of highly flexible skins embedded with Bragg grating sensors recorded in either silica or polymer optical fibre. The photonic skins, with a size of 10cm x 10cm and thickness of 1mm, were fabricated by embedding the polymer fibre or silica fibre containing Bragg gratings in Sylgard 184 from Dow Corning. Pressure sensing was studied using a cylindrical metal post placed on an array of points across the skin. The polymer fibre grating exhibits approximately 10 times the pressure sensitivity of the silica fibre and responds to the post even when it is placed a few centimetres away from the sensing fibre. Although the intrinsic strain sensitivities of gratings in the two fibre types are very similar, when embedded in the skin the polymer grating displayed a strain sensitivity approximately 45 times greater than the silica device, which also suffered from considerable hysteresis. The polymer grating displayed a near linear response over wavelength shifts of 9nm for 1% strain. The difference in behaviour we attribute to the much greater Young's modulus of the silica fibre (70 GPa) compared to the polymer fibre (3 GPa).

  16. Global Strain in Severe Aortic Valve Stenosis

    DEFF Research Database (Denmark)

    Dahl, Jordi S; Videbæk, Lars; Poulsen, Mikael K;

    2012-01-01

    BACKGROUND: -Global longitudinal systolic strain (GLS) is often reduced in aortic stenosis despite normal ejection fraction. The importance of reduced preoperative GLS on long-term outcome after aortic valve replacement (AVR) is unknown. METHODS AND RESULTS: -A total of 125 patients with severe...

  17. Measuring physical strain during ambulation with accelerometry

    NARCIS (Netherlands)

    Bussmann, J B; Hartgerink, I; van der Woude, L H; Stam, H J

    2000-01-01

    PURPOSE: To study the feasibility of ambulatory accelerometry in the evaluation of physical strain in walking at different speeds and different levels of economy. METHODS: Twelve able-bodied subjects performed a walking test on a treadmill with increasing walking speed. After a 6-wk period, these me

  18. High strain-rate magnetoelasticity in Galfenol

    Science.gov (United States)

    Domann, J. P.; Loeffler, C. M.; Martin, B. E.; Carman, G. P.

    2015-09-01

    This paper presents the experimental measurements of a highly magnetoelastic material (Galfenol) under impact loading. A Split-Hopkinson Pressure Bar was used to generate compressive stress up to 275 MPa at strain rates of either 20/s or 33/s while measuring the stress-strain response and change in magnetic flux density due to magnetoelastic coupling. The average Young's modulus (44.85 GPa) was invariant to strain rate, with instantaneous stiffness ranging from 25 to 55 GPa. A lumped parameters model simulated the measured pickup coil voltages in response to an applied stress pulse. Fitting the model to the experimental data provided the average piezomagnetic coefficient and relative permeability as functions of field strength. The model suggests magnetoelastic coupling is primarily insensitive to strain rates as high as 33/s. Additionally, the lumped parameters model was used to investigate magnetoelastic transducers as potential pulsed power sources. Results show that Galfenol can generate large quantities of instantaneous power (80 MW/m3 ), comparable to explosively driven ferromagnetic pulse generators (500 MW/m3 ). However, this process is much more efficient and can be cyclically carried out in the linear elastic range of the material, in stark contrast with explosively driven pulsed power generators.

  19. Network of flexible capacitive strain gauges for the reconstruction of surface strain

    International Nuclear Information System (INIS)

    Monitoring of surface strain on mesosurfaces is a difficult task, often impeded by the lack of scalability of conventional sensing systems. A solution is to deploy large networks of flexible strain gauges, a type of large area electronics. The authors have recently proposed a soft elastomeric capacitor (SEC) as an economical skin-type solution for large-scale deployment onto mesosurfaces. The sensing principle is based on a measurable change in the sensor’s capacitance upon strain. In this paper, we study the performance of the sensor at reconstructing surface strain map and deflection shapes. A particular feature of the sensor is that it measures surface strain additively, because it is not utilized within a Wheatstone bridge configuration. An algorithm is proposed to decompose the additive in-plane strain measurements from the SEC into principal components. The algorithm consists of assuming a polynomial shape function, and deriving the strain based on Kirchhoff plate theory. A least-squares estimator (LSE) is used to minimize the error between the assumed model and the SEC signals after the enforcement of boundary conditions. Numerical simulations are conducted on a symmetric rectangular cantilever thin plate under symmetric and asymmetric static loads to demonstrate the accuracy and real-time applicability of the algorithm. The performance of the algorithm is further examined on an asymmetric cantilever laminated thin plate constituted with orthotropic materials mimicking a wind turbine blade, and subjected to a non-stationary wind load. Results from simulations show good performance of the algorithm at reconstructing the surface strain maps for both in-plane principal strain components, and that it can be applied in real time. However, its performance can be improved by strengthening assumptions on boundary conditions. The algorithm exhibits robustness in performance with respect to load and noise in signals, except when most of the sensors’ signals are

  20. Network of flexible capacitive strain gauges for the reconstruction of surface strain

    Science.gov (United States)

    Wu, Jingzhe; Song, Chunhui; Saleem, Hussam S.; Downey, Austin; Laflamme, Simon

    2015-05-01

    Monitoring of surface strain on mesosurfaces is a difficult task, often impeded by the lack of scalability of conventional sensing systems. A solution is to deploy large networks of flexible strain gauges, a type of large area electronics. The authors have recently proposed a soft elastomeric capacitor (SEC) as an economical skin-type solution for large-scale deployment onto mesosurfaces. The sensing principle is based on a measurable change in the sensor’s capacitance upon strain. In this paper, we study the performance of the sensor at reconstructing surface strain map and deflection shapes. A particular feature of the sensor is that it measures surface strain additively, because it is not utilized within a Wheatstone bridge configuration. An algorithm is proposed to decompose the additive in-plane strain measurements from the SEC into principal components. The algorithm consists of assuming a polynomial shape function, and deriving the strain based on Kirchhoff plate theory. A least-squares estimator (LSE) is used to minimize the error between the assumed model and the SEC signals after the enforcement of boundary conditions. Numerical simulations are conducted on a symmetric rectangular cantilever thin plate under symmetric and asymmetric static loads to demonstrate the accuracy and real-time applicability of the algorithm. The performance of the algorithm is further examined on an asymmetric cantilever laminated thin plate constituted with orthotropic materials mimicking a wind turbine blade, and subjected to a non-stationary wind load. Results from simulations show good performance of the algorithm at reconstructing the surface strain maps for both in-plane principal strain components, and that it can be applied in real time. However, its performance can be improved by strengthening assumptions on boundary conditions. The algorithm exhibits robustness in performance with respect to load and noise in signals, except when most of the sensors’ signals are

  1. Recent advances in echocardiography: strain and strain rate imaging [version 1; referees: 3 approved

    Directory of Open Access Journals (Sweden)

    Oana Mirea

    2016-04-01

    Full Text Available Deformation imaging by echocardiography is a well-established research tool which has been gaining interest from clinical cardiologists since the introduction of speckle tracking. Post-processing of echo images to analyze deformation has become readily available at the fingertips of the user. New parameters such as global longitudinal strain have been shown to provide added diagnostic value, and ongoing efforts of the imaging societies and industry aimed at harmonizing methods will improve the technique further. This review focuses on recent advances in the field of echocardiographic strain and strain rate imaging, and provides an overview on its current and potential future clinical applications.

  2. Strain rate effects for spallation of concrete

    Directory of Open Access Journals (Sweden)

    Häussler-Combe Ulrich

    2015-01-01

    Full Text Available Appropriate triaxial constitutive laws are the key for a realistic simulation of high speed dynamics of concrete. The strain rate effect is still an open issue within this context. In particular the question whether it is a material property – which can be covered by rate dependent stress strain relations – or mainly an effect of inertia is still under discussion. Experimental and theoretical investigations of spallation of concrete specimen in a Hopkinson Bar setup may bring some evidence into this question. For this purpose the paper describes the VERD model, a newly developed constitutive law for concrete based on a damage approach with included strain rate effects [1]. In contrast to other approaches the dynamic strength increase is not directly coupled to strain rate values but related to physical mechanisms like the retarded movement of water in capillary systems and delayed microcracking. The constitutive law is fully triaxial and implemented into explicit finite element codes for the investigation of a wide range of concrete structures exposed to impact and explosions. The current setup models spallation experiments with concrete specimen [2]. The results of such experiments are mainly related to the dynamic tensile strength and the crack energy of concrete which may be derived from, e.g., the velocity of spalled concrete fragments. The experimental results are compared to the VERD model and two further constitutive laws implemented in LS-Dyna. The results indicate that both viscosity and retarded damage are required for a realistic description of the material behaviour of concrete exposed to high strain effects [3].

  3. Development of quantitative PCR and metagenomics-based approaches for strain quantification of a defined mixed-strain starter culture.

    Science.gov (United States)

    Johansen, Pernille; Vindeløv, Jannik; Arneborg, Nils; Brockmann, Elke

    2014-05-01

    Although the strain composition of mixed cultures may hugely affect production of various fermented foods, such as e.g. cheese, tools for investigating it have so far been limited. In this study, two new approaches for quantification of seven Lactococcus lactis subsp. cremoris strains (S1-S7) in a defined mixed-strain starter culture were developed and verified. By mapping NGS reads from 47 sequenced L. lactis strains to de novo assembly contigs of the seven strains, two strain-specific sequence regions (SEQ1 and SEQ2) were identified for each strain for qPCR primer design (A1 and A2). The qPCR assays amplified their strain-specific sequence region target efficiently. Additionally, high reproducibility was obtained in a validation sample containing equal amounts of the seven strains, and assay-to-assay coefficients of variance (CVs) for six (i.e. S1, S2, S4-S7) of the seven strains correlated to the inter-plate CVs. Hence, at least for six strains, the qPCR assay design approach was successful. The metagenomics-based approach quantified the seven strains based on average coverage of SEQ1 and SEQ2 by mapping sequencing reads from the validation sample to the strain-specific sequence regions. Average coverages of the SEQ1 and SEQ2 in the metagenomics data showed CVs of ≤17.3% for six strains (i.e. S1-S4, S6, S7). Thus, the metagenomics-based quantification approach was considered successful for six strains, regardless of the strain-specific sequence region used. When comparing qPCR- and metagenomics-based quantifications of the validation sample, the identified strain-specific sequence regions were considered suitable and applicable for quantification at a strain level of defined mixed-strain starter cultures.

  4. Brucella abortus Strain 2308 Wisconsin Genome: Importance of the Definition of Reference Strains

    Science.gov (United States)

    Suárez-Esquivel, Marcela; Ruiz-Villalobos, Nazareth; Castillo-Zeledón, Amanda; Jiménez-Rojas, César; Roop II, R. Martin; Comerci, Diego J.; Barquero-Calvo, Elías; Chacón-Díaz, Carlos; Caswell, Clayton C.; Baker, Kate S.; Chaves-Olarte, Esteban; Thomson, Nicholas R.; Moreno, Edgardo; Letesson, Jean J.; De Bolle, Xavier; Guzmán-Verri, Caterina

    2016-01-01

    Brucellosis is a bacterial infectious disease affecting a wide range of mammals and a neglected zoonosis caused by species of the genetically homogenous genus Brucella. As in most studies on bacterial diseases, research in brucellosis is carried out by using reference strains as canonical models to understand the mechanisms underlying host pathogen interactions. We performed whole genome sequencing analysis of the reference strain B. abortus 2308 routinely used in our laboratory, including manual curated annotation accessible as an editable version through a link at https://en.wikipedia.org/wiki/Brucella#Genomics. Comparison of this genome with two publically available 2308 genomes showed significant differences, particularly indels related to insertional elements, suggesting variability related to the transposition of these elements within the same strain. Considering the outcome of high resolution genomic techniques in the bacteriology field, the conventional concept of strain definition needs to be revised. PMID:27746773

  5. International Clostridium difficile animal strain collection and large diversity of animal associated strains

    DEFF Research Database (Denmark)

    Janezic, Sandra; Zidaric, Valerija; Pardon, Bart;

    2014-01-01

    Background: Clostridium difficile is an important cause of intestinal infections in some animal species and animals might be a reservoir for community associated human infections. Here we describe a collection of animal associated C. difficile strains from 12 countries based on inclusion criteria......; 10 countries). Conclusions: This results show that although PCR ribotype 078 is often reported as the major animal C. difficile type, especially in pigs, the variability of strains in pigs and other animal hosts is substantial. Most common human PCR ribotypes (014/020 and 002) are also among most...... prevalent animal associated C. difficile strains worldwide. The widespread dissemination of toxigenic C. difficile and the considerable overlap in strain distribution between species furthers concerns about interspecies, including zoonotic, transmission of this critically important pathogen....

  6. Strain-dependent induction of cytokine profiles in the gut by orally administered Lactobacillus strains

    NARCIS (Netherlands)

    Maassen, C.B.M.; Holten-Neelen, C. van; Balk, F.; Bak-Glashouwer, M.-J.H. den; Leer, R.J.; Laman, J.D.; Boersma, W.J.A.; Claassen, E.

    2000-01-01

    Different Lactobacillus strains are frequently used in consumer food products. In addition, recombinant lactobacilli which contain novel expression vectors can now be used in immunotherapeutic applications such as oral vaccination strategies and in T cell tolerance induction approaches for autoimmun

  7. The principle of strain reconstruction tomography: Determination of quench strain distribution from diffraction measurements

    International Nuclear Information System (INIS)

    The evaluation of residual elastic strain within the bulk of engineering components or natural objects is a challenging task, since in general it requires mapping a six-component tensor quantity in three dimensions. A further challenge concerns the interpretation of finite resolution data in a way that is commensurate and non-contradictory with respect to continuum deformation models. A practical solution for this problem, if it is ever to be found, must include efficient measurement interpretation and data reduction techniques. We describe the principle of strain tomography by high-energy X-ray diffraction, i.e. reconstruction of the higher dimensional distribution of strain within an object from multiple scans in lower dimensions, and illustrate the application of this principle to a simple case of reconstruction of an axisymmetric residual strain state induced in a cylindrical sample by quenching. The underlying principle of the analysis method presented in this paper allows generalisation to more complex situations

  8. The principle of strain reconstruction tomography: Determination of quench strain distribution from diffraction measurements

    Energy Technology Data Exchange (ETDEWEB)

    Korsunsky, Alexander M. [Department of Engineering Science, University of Oxford, Parks Road, Oxford, Oxon OX1 3PJ (United Kingdom)]. E-mail: alexander.korsunsky@eng.ox.ac.uk; Vorster, Willem J.J. [Department of Engineering Science, University of Oxford, Parks Road, Oxford, Oxon OX1 3PJ (United Kingdom); Zhang, Shu Yan [Department of Engineering Science, University of Oxford, Parks Road, Oxford, Oxon OX1 3PJ (United Kingdom); Dini, Daniele [Department of Engineering Science, University of Oxford, Parks Road, Oxford, Oxon OX1 3PJ (United Kingdom); Latham, David [Department of Engineering Science, University of Oxford, Parks Road, Oxford, Oxon OX1 3PJ (United Kingdom); Golshan, Mina [Synchrotron Radiation Source, Daresbury Laboratory, Keckwick Lane, Warrington WA4 4AD (United Kingdom); Liu, Jian [Department of Chemistry, University of Durham, South Road, Durham DH1 3LE (United Kingdom); Kyriakoglou, Yannis [Rolls-Royce plc, P.O. Box 31, Derby DE24 8BJ (United Kingdom); Walsh, Michael J. [Rolls-Royce plc, P.O. Box 31, Derby DE24 8BJ (United Kingdom)

    2006-05-15

    The evaluation of residual elastic strain within the bulk of engineering components or natural objects is a challenging task, since in general it requires mapping a six-component tensor quantity in three dimensions. A further challenge concerns the interpretation of finite resolution data in a way that is commensurate and non-contradictory with respect to continuum deformation models. A practical solution for this problem, if it is ever to be found, must include efficient measurement interpretation and data reduction techniques. We describe the principle of strain tomography by high-energy X-ray diffraction, i.e. reconstruction of the higher dimensional distribution of strain within an object from multiple scans in lower dimensions, and illustrate the application of this principle to a simple case of reconstruction of an axisymmetric residual strain state induced in a cylindrical sample by quenching. The underlying principle of the analysis method presented in this paper allows generalisation to more complex situations.

  9. A wide extent of inter-strain diversity in virulent and vaccine strains of alphaherpesviruses.

    Directory of Open Access Journals (Sweden)

    Moriah L Szpara

    2011-10-01

    Full Text Available Alphaherpesviruses are widespread in the human population, and include herpes simplex virus 1 (HSV-1 and 2, and varicella zoster virus (VZV. These viral pathogens cause epithelial lesions, and then infect the nervous system to cause lifelong latency, reactivation, and spread. A related veterinary herpesvirus, pseudorabies (PRV, causes similar disease in livestock that result in significant economic losses. Vaccines developed for VZV and PRV serve as useful models for the development of an HSV-1 vaccine. We present full genome sequence comparisons of the PRV vaccine strain Bartha, and two virulent PRV isolates, Kaplan and Becker. These genome sequences were determined by high-throughput sequencing and assembly, and present new insights into the attenuation of a mammalian alphaherpesvirus vaccine strain. We find many previously unknown coding differences between PRV Bartha and the virulent strains, including changes to the fusion proteins gH and gB, and over forty other viral proteins. Inter-strain variation in PRV protein sequences is much closer to levels previously observed for HSV-1 than for the highly stable VZV proteome. Almost 20% of the PRV genome contains tandem short sequence repeats (SSRs, a class of nucleic acids motifs whose length-variation has been associated with changes in DNA binding site efficiency, transcriptional regulation, and protein interactions. We find SSRs throughout the herpesvirus family, and provide the first global characterization of SSRs in viruses, both within and between strains. We find SSR length variation between different isolates of PRV and HSV-1, which may provide a new mechanism for phenotypic variation between strains. Finally, we detected a small number of polymorphic bases within each plaque-purified PRV strain, and we characterize the effect of passage and plaque-purification on these polymorphisms. These data add to growing evidence that even plaque-purified stocks of stable DNA viruses exhibit

  10. Screening and Evaluation of Polyhydroxybutyrate-Producing Strains from Indigenous Isolate Cupriavidus taiwanensis Strains

    OpenAIRE

    Om-Murugan Janarthanan; Chi-Wei Lo; Chin-Kuei Huang; Ho-Shing Wu; Yi-Ming Sun; Wei-Chuan Chen; Yu-Hong Wei

    2011-01-01

    Polyhydroxyalkanoate (PHA) is a biodegradable material with many potential biomedical applications, including medical implants and drug delivery. This study developed a system for screening production strains in order to optimize PHA production in Cupriavidus taiwanensis 184, 185, 186, 187, 204, 208, 209 and Pseudomona oleovorans ATCC 29347. In this study, Sudan black B staining, Infrared (IR) and Gas Chromatography (GC) analysis indicated that the best strain for PHA synthesis is C. taiwanen...

  11. Influence of strained drain on performance of ballistic channel devices

    International Nuclear Information System (INIS)

    We have studied the performance of ballistic channel diodes with strained channel or drain, based on Monte Carlo simulation. A larger increase in drain current and mean velocity of electrons in the drain region is observed for strained drain diode compared to strained channel diode. This is due to reduction of intervalley scattering and electrons transported with smaller transverse effective mass in the strained drain. This also results in lower heat generation and parasitic resistances in strained drain. We conclude that the strained drain is an efficient way to improve electrical characteristics of devices with ballistic channel. (paper)

  12. Hole doped Dirac states in silicene by biaxial tensile strain

    KAUST Repository

    Kaloni, Thaneshwor P.

    2013-03-11

    The effects of biaxial tensile strain on the structure, electronic states, and mechanical properties of silicene are studied by ab-initio calculations. Our results show that up to 5% strain the Dirac cone remains essentially at the Fermi level, while higher strain induces hole doped Dirac states because of weakened Si–Si bonds. We demonstrate that the silicene lattice is stable up to 17% strain. It is noted that the buckling first decreases with the strain (up to 10%) and then increases again, which is accompanied by a band gap variation. We also calculate the Grüneisen parameter and demonstrate a strain dependence similar to that of graphene.

  13. Generalizing the Fermi velocity of strained graphene from uniform to nonuniform strain

    Energy Technology Data Exchange (ETDEWEB)

    Oliva-Leyva, M., E-mail: moliva@fisica.unam.mx [Departamento de Física-Química, Instituto de Física, Universidad Nacional Autónoma de México (UNAM), Apartado Postal 20-364, 01000 México, Distrito Federal (Mexico); Naumis, Gerardo G., E-mail: naumis@fisica.unam.mx [Departamento de Física-Química, Instituto de Física, Universidad Nacional Autónoma de México (UNAM), Apartado Postal 20-364, 01000 México, Distrito Federal (Mexico); School of Physics Astronomy and Computational Sciences, George Mason University, Fairfax, VA 22030 (United States)

    2015-10-23

    The relevance of the strain-induced Dirac point shift to obtain the appropriate anisotropic Fermi velocity of strained graphene is demonstrated. Then a critical revision of the available effective Dirac Hamiltonians is made by studying in detail the limiting case of a uniform strain. An effective Dirac Hamiltonian for nonuniform strain is thus reported, which takes into account all strain-induced effects: changes in the nearest-neighbor hopping parameters, the reciprocal lattice deformation and the true shift of the Dirac point. Pseudomagnetic fields are thus explained by means of position-dependent Dirac cones, whereas complex gauge fields appear as a consequence of a position-dependent Fermi velocity. Also, position-dependent Fermi velocity effects on the spinor wavefunction are considered for interesting cases of deformations such as flexural modes. - Highlights: • The relevance of the strain-induced Dirac point shift to obtain the anisotropic Fermi velocity is shown. • An appropriate expression of the position-dependent Fermi velocity is reported. • A position-dependent Fermi velocity induces an inhomogeneity in the carrier probability density.

  14. Creep strain and strain rate response of 2219 Al alloy at high stress levels

    Energy Technology Data Exchange (ETDEWEB)

    Taminger, K.M.B.; Wagner, J.A.; Barry Lisagor, W. [National Aeronautics and Space Administration, Hampton, VA (United States). Langley Research Center

    2000-07-01

    As a result of high localized plastic deformation experienced during proof testing in an international space station connecting module, a study was undertaken to determine the deformation response of a 2219-T851 roll forging. After prestraining 2219-T851 Al specimens to simulate strains observed during the proof testing, creep tests were conducted in the temperature range from ambient temperature to 107 C (225 F) at stress levels approaching the ultimate tensile strength of 2219-T851 Al. Strain-time histories and strain rate responses were examined. The strain rate response was extremely high initially, but decayed rapidly, spanning as much as five orders of magnitude during primary creep. Select specimens were subjected to incremental step loading and exhibited initial creep rates of similar magnitude for each load step. Although the creep rates decreased quickly at all loads, the creep rates dropped faster and reached lower strain rate levels for lower applied loads. The initial creep rate and creep rate decay associated with primary creep were similar for specimens with and without prestrain; however, prestraining (strain hardening) the specimens, as in the aforementioned proof test, resulted in significantly longer creep life. (orig.)

  15. Creep Strain and Strain Rate Response of 2219 Al Alloy at High Stress Levels

    Science.gov (United States)

    Taminger, Karen M. B.; Wagner, John A.; Lisagor, W. Barry

    1998-01-01

    As a result of high localized plastic deformation experienced during proof testing in an International Space Station connecting module, a study was undertaken to determine the deformation response of a 2219-T851 roll forging. After prestraining 2219-T851 Al specimens to simulate strains observed during the proof testing, creep tests were conducted in the temperature range from ambient temperature to 107 C (225 F) at stress levels approaching the ultimate tensile strength of 2219-T851 Al. Strain-time histories and strain rate responses were examined. The strain rate response was extremely high initially, but decayed rapidly, spanning as much as five orders of magnitude during primary creep. Select specimens were subjected to incremental step loading and exhibited initial creep rates of similar magnitude for each load step. Although the creep rates decreased quickly at all loads, the creep rates dropped faster and reached lower strain rate levels for lower applied loads. The initial creep rate and creep rate decay associated with primary creep were similar for specimens with and without prestrain; however, prestraining (strain hardening) the specimens, as in the aforementioned proof test, resulted in significantly longer creep life.

  16. Stress-strain characteristics of materials at high strain rates. Part II. Experimental results

    Energy Technology Data Exchange (ETDEWEB)

    Ripperger, E. A. [Texas. Univ., Austin, TX (US). Structural Mechanics Research Lab.

    1958-08-29

    These two reports were issued separately, but are cataloged as a unit. A photoelectric method for measuring displacements during high-velocity impacts is described. The theory of the system is discussed in detail, and a prototype system which was built and tested is described. The performance of the prototype system is evaluated by comparing the results which it gives with results obtained by other methods of measurement. The system was found capable of a resolution of at least 0.01 inches. static and dynamic stress-strain characteristics of seven high polymers, polyethylene, teflon, nylon, tenite M, tenite H, polystyrene, and saran, plus three metals, lead, copper, and aluminum, are described and compared by means of stress-strain curves and photographs. Data are also presented which show qualitatively the effects produced on stress-strain characteristics by specimen configuration, temperature, and impact velocity. It is shown that there is a definite strain-rate effect for all these materials except polystyrene. The effect is one of an apparent stiffening of the material with increasing strain rate, which is similar to the effect produced by lowering the temperature. The stress-strain measurements are examined critically, inconsistencies are pointed out, and possible sources of error suggested. Values of yield stress, modulus of elasticity and energy absorption for all materials (except copper and aluminum), specimen configurations, temperatures, and impact velocities included in the investigation are tabulated.

  17. Strain mapping near a triple junction in strained Ni-based alloy using EBSD and biaxial nanogauges

    Energy Technology Data Exchange (ETDEWEB)

    Clair, A. [Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 5209 CNRS, Universite de Bourgogne, 9 Avenue Alain Savary, BP 47870, 21078 Dijon Cedex (France); Foucault, M.; Calonne, O. [Areva ANP, Centre Technique Departement Corrosion-Chimie, 30 Bd de l' industrie, BP 181, 71205 Le Creusot (France); Lacroute, Y.; Markey, L.; Salazar, M.; Vignal, V. [Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 5209 CNRS, Universite de Bourgogne, 9 Avenue Alain Savary, BP 47870, 21078 Dijon Cedex (France); Finot, E., E-mail: Eric.Finot@u-bourgogne.fr [Laboratoire Interdisciplinaire Carnot de Bourgogne, UMR 5209 CNRS, Universite de Bourgogne, 9 Avenue Alain Savary, BP 47870, 21078 Dijon Cedex (France)

    2011-05-15

    Research highlights: > Surface strains measured using nanogauge were compared to the texture obtained by EBSD. > Statistics of the principal strain discern the grains according to the Schmid factor. > Strain hotspots were localized near a triple junction of alloy 600 under tensile loading. > Asymetrical profile of the GB strains is a criterion for surface cracking initiation. - Abstract: A key element for analyzing the crack initiation in strained polycrystalline alloys is the local quantification of the surface strain distribution according to the grain texture. Using electron backscattered diffraction, the local microstructure was determined to both localize a triple junction and deduce the local Schmid factors. Kernel average misorientation (KAM) was also used to map the areas of defect concentration. The maximum principal strain and the in-plane shear strain were quantified using the biaxial nanogauge. Distortions of the array of nanodots used as spot markers were analyzed near the triple junction. The crystallographic orientation and the surface strain were then investigated both statistically for each grain and locally at the grain boundaries. The superimposition of microstructure and strain maps allows the high strain gradient (reaching 3-fold the applied strain) to be localized at preferential grain boundaries near the triple junction. The Schmid factors and the KAM were compared to the maximum principal strain and the in-plane shear strain respectively. The polycrystalline deformation was attributable first to the rotation of some grains, followed by the elongation of all grains along their preferential activated slip systems.

  18. EDITORIAL: Excelling under strain: band engineering in nanomaterials Excelling under strain: band engineering in nanomaterials

    Science.gov (United States)

    Demming, Anna

    2013-08-01

    A little stress or strain has been known to improve the performance of athletes, actors and of course nanomaterials alike. In fact strain in silicon is now a major engineering tool for improving the performance of devices, and is ubiquitously used in device design and fabrication. Strain engineering alters a material's band structure, a model of electron behaviour that describes how as atoms come together in a solid, their discrete electron orbitals overlap to ultimately give rise to bands of allowed energy levels. In a strained crystal lattice of silicon or silicon germanium the distance between atoms in the lattice is greater than usual and the bands of allowed energy levels change. This July marks 100 years since Bohr submitted his paper 'On the constitution of atoms and molecules' [1] where he describes the structure of the atom in terms of discrete allowed energy levels. The paper was a seminal contribution to the development of quantum mechanics and laid the initial theoretical precepts for band gap engineering in devices. In this issue Nrauda and a collaboration of researchers in Europe and Australia study the growth of defect-free SiGe islands on pre-patterned silicon [2]. They analyse the strain in the islands and determine at what point lattice dislocations set in with a view to informing implementation of strain engineering in devices. The effects of strain on band structure in silicon and germanium were already studied and reported in the 1950s [3, 4]. Since then the increasing focus on nanoscale materials and the hunger for control of electronic properties has prompted further study of strain effects. The increased surface area to volume ratio in nanostructures changes the strain behaviour with respect to bulk materials, and this can also be exploited for handling and fine tuning strain to manipulate material properties. It is perhaps no surprise that graphene, one of the most high-profile materials in current nanotechnology research, has attracted

  19. Efeito do fotosensibilizador nos lípidos de Aeromonas salmonicida

    OpenAIRE

    Gonçalves, José Manuel Carita

    2014-01-01

    A Inactivação fotodinâmica é um método simples e eficiente na inactivação de microorganismos. Inactivação fotodinâmica combina o uso de luz com um fotosensibilizador, como por exemplo porfirinas, que na presença de oxigénio gera a formação de espécies reactivas de oxigénio, como o oxigénio singleto e radicais livres, que são capazes de oxidar componentes membranares vitais. As principais vantagens da Terapia Fotodinâmica (TFD) são a sua eficiência na inactivação de bactérias...

  20. Techniques for increasing boron fiber fracture strain

    Science.gov (United States)

    Dicarlo, J. A.

    1977-01-01

    Improvement in the strain-to-failure of CVD boron fibers is shown possible by contracting the tungsten boride core region and its inherent flaws. The results of three methods are presented in which etching and thermal processing techniques were employed to achieve core flaw contraction by internal stresses available in the boron sheath. After commercially and treatment induced surface flaws were removed from 203 micrometers (8 mil) fibers, the core flaw was observed to be essentially the only source of fiber fracture. Thus, fiber strain-to-failure was found to improve by an amount equal to the treatment induced contraction on the core flaw. Commercial feasibility considerations suggest as the most cost effective technique that method in which as-produced fibers are given a rapid heat treatment above 700 C. Preliminary results concerning the contraction kinetics and fracture behavior observed are presented and discussed both for high vacuum and argon gas heat treatment environments.

  1. Chaotic desynchronization of multi-strain diseases

    CERN Document Server

    Schwartz, I B; Cummings, D A T; Billings, L; McCrary, M; Burke, D S; Schwartz, Ira B.; Shaw, Leah B.; Cummings, Derek A. T.; Billings, Lora; Crary, Marie Mc; Burke, Donald S.

    2005-01-01

    Multi-strain diseases are diseases that consist of several strains, or serotypes. The serotypes may interact by antibody-dependent enhancement (ADE), in which infection with a single serotype is asymptomatic, but infection with a second serotype leads to serious illness accompanied by greater infectivity. It has been observed from serotype data of dengue hemorrhagic fever that outbreaks of the four serotypes occur asynchronously. Both autonomous and seasonally driven outbreaks were studied in a model containing ADE. For sufficiently small ADE, the number of infectives of each serotype synchronizes, with outbreaks occurring in phase. When the ADE increases past a threshold, the system becomes chaotic, and infectives of each serotype desynchronize. However, certain groupings of the primary and second ary infectives remain synchronized even in the chaotic regime.

  2. Organic chemistry. Strain-release amination.

    Science.gov (United States)

    Gianatassio, Ryan; Lopchuk, Justin M; Wang, Jie; Pan, Chung-Mao; Malins, Lara R; Prieto, Liher; Brandt, Thomas A; Collins, Michael R; Gallego, Gary M; Sach, Neal W; Spangler, Jillian E; Zhu, Huichin; Zhu, Jinjiang; Baran, Phil S

    2016-01-15

    To optimize drug candidates, modern medicinal chemists are increasingly turning to an unconventional structural motif: small, strained ring systems. However, the difficulty of introducing substituents such as bicyclo[1.1.1]pentanes, azetidines, or cyclobutanes often outweighs the challenge of synthesizing the parent scaffold itself. Thus, there is an urgent need for general methods to rapidly and directly append such groups onto core scaffolds. Here we report a general strategy to harness the embedded potential energy of effectively spring-loaded C-C and C-N bonds with the most oft-encountered nucleophiles in pharmaceutical chemistry, amines. Strain-release amination can diversify a range of substrates with a multitude of desirable bioisosteres at both the early and late stages of a synthesis. The technique has also been applied to peptide labeling and bioconjugation.

  3. Strain monitoring of a composite wing

    Science.gov (United States)

    Strathman, Joseph; Watkins, Steve E.; Kaur, Amardeep; Macke, David C.

    2016-04-01

    An instrumented composite wing is described. The wing is designed to meet the load and ruggedness requirements for a fixed-wing unmanned aerial vehicle (UAV) in search-and-rescue applications. The UAV supports educational systems development and has a 2.1-m wingspan. The wing structure consists of a foam core covered by a carbon-fiber, laminate composite shell. To quantify the wing characteristics, a fiber-optic strain sensor was surface mounted to measure distributed strain. This sensor is based on Rayleigh scattering from local index variations and it is capable of high spatial resolution. The use of the Rayleigh-scattering fiber-optic sensors for distributed measurements is discussed.

  4. Dynamic strain aging in Haynes 282 superalloy

    Directory of Open Access Journals (Sweden)

    Hörnqvist Magnus

    2014-01-01

    Full Text Available Haynes 282 is a newly introduced Ni-based superallony, developed to provide a combination of high-temperature mechanical properties, thermal stability and processability. The present contribution investigates the effect of dynamic strain aging (DSA on the deformation behaviour of Haynes 282 during monotonic and cyclic loading. It is shown that DSA (presumably related to carbon diffusion based on rough estimates of the activation energy completely dominates the development of the stress during cycling at intermediate temperatures, leading to extensive cyclic hardening and serrated yielding. However, no clear effects on the fatigue life or the resulting dislocation structure could be observed. The tensile properties were not severely affected, in spite of the presence of extensive serrated yielding, although a reduction in ductility was observed in the DSA temperature regime. During monotonic loading at lower strain rates indications of an additional DSA mechanism due to substitutional elements were observed.

  5. Magnetic properties on strained manganite thin film

    Science.gov (United States)

    Prajapat, C. L.; Singh, M. R.; Gupta, S. K.; Bhattacharya, D.; Basu, S.; Ravikumar, G.

    2014-04-01

    Structural and magnetic studies on La2/3Sr1/3MnO3 (LSMO) epitaxial films grown on STO (100) and MgO (100) substrates by Pulsed Laser Deposition are presented. Due to larger interface strain, the grain size of LSMO on MgO is much smaller than that on STO substrate. However, anisotropy energy produced as a result of in plane tensile strain is much larger in case of the films deposited on MgO in such a way that the blocking (irreversibility) temperature and the coercive fields inferred from temperature and magnetic field dependent magnetization measurements are significantly higher. The importance of this result for the memory applications is highlighted.

  6. A Tunable Strain Sensor Using Nanogranular Metals

    Directory of Open Access Journals (Sweden)

    Friedemann Völklein

    2010-11-01

    Full Text Available This paper introduces a new methodology for the fabrication of strain-sensor elements for MEMS and NEMS applications based on the tunneling effect in nano-granular metals. The strain-sensor elements are prepared by the maskless lithography technique of focused electron-beam-induced deposition (FEBID employing the precursor trimethylmethylcyclopentadienyl platinum [MeCpPt(Me3]. We use a cantilever-based deflection technique to determine the sensitivity (gauge factor of the sensor element. We find that its sensitivity depends on the electrical conductivity and can be continuously tuned, either by the thickness of the deposit or by electron-beam irradiation leading to a distinct maximum in the sensitivity. This maximum finds a theoretical rationale in recent advances in the understanding of electronic charge transport in nano-granular metals.

  7. Strain-specific chemotaxis of Azospirillum spp.

    OpenAIRE

    Reinhold, B; Hurek, T; Fendrik, I

    1985-01-01

    Chemotactic responses of three Azospirillum strains originating from different host plants were compared to examine the possible role of chemotaxis in the adaptation of these bacteria to their respective hosts. The chemotaxis to several sugars, amino acids, and organic acids was determined qualitatively by an agar plate assay and quantitatively by a channeled-chamber technique. High chemotactic ratios, up to 40, were obtained with the latter technique. The chemotactic response did not rely up...

  8. Plane strain problem in microstretch elastic solid

    Indian Academy of Sciences (India)

    Rajneesh Kumar; Ranjit Singh; T K Chadha

    2003-12-01

    The eigenvalue approach is developed for the two-dimensional plane strain problem in a microstretch elastic medium. Applying Laplace and Fourier transforms, an infinite space subjected to a concentrated force is studied. The integral transforms are inverted using a numerical technique to get displacement, force stress, couple stress and first moment, which are also shown graphically. The results of micropolar elasticity are deduced as a special case from the present formulation.

  9. Strain weakening enables continental plate tectonics

    OpenAIRE

    Gueydan, Frédéric; Précigout, Jacques; Montesi, Laurent G.J.

    2014-01-01

    International audience Much debate exists concerning the strength distribution of the continental lithosphere, how it controls lithosphere-scale strain localization and hence enables plate tectonics. No rheological model proposed to date is comprehensive enough to describe both the weakness of plate boundary and rigid-like behaviour of plate interiors. Here we show that the duality of strength of the lithosphere corresponds to different stages of microstructural evolution. Geological const...

  10. Gurson's Model: ALE Formulation and Strain Localization

    Science.gov (United States)

    da Cunda, Luiz A. B.; Creus, Guillermo J.

    2007-05-01

    This paper presents a brief review of Gurson's damage model, employed to describes the strength degradation in ductile metals submitted to large plastic deformations. The damage model is applied using finite elements and an Arbitrary Lagrangian-Eulerian formulation (ALE), to ensure a better quality to the finite elements mesh. The study of the combined application of ALE and Gurson approach to damage modeling and strain localization is the object of this paper.

  11. Quasi-bound states in strained graphene

    Science.gov (United States)

    Bahamon, Dario; Qi, Zenan; Park, Harold; Pareira, Vitor; Campbell, David

    In this work, we explore the possibility of manipulating electronic states in graphene nanostructures by mechanical means. Specifically, we use molecular dynamics and tight-binding models to access the electronic and transport properties of strained graphene nanobubbles and graphene kirigami. We establish that low energy electrons can be confined in the arms of the kirigami and within the nanobubbles; under different load conditions the coupling between confined states and continuous states is modified creating different conductance line-shapes.

  12. Models for elastic shells with incompatible strains

    OpenAIRE

    Lewicka, Marta; Mahadevan, L.; Pakzad, Mohammad Reza

    2014-01-01

    The three-dimensional shapes of thin lamina such as leaves, flowers, feathers, wings etc, are driven by the differential strain induced by the relative growth. The growth takes place through variations in the Riemannian metric, given on the thin sheet as a function of location in the central plane and also across its thickness. The shape is then a consequence of elastic energy minimization on the frustrated geometrical object. Here we provide a rigorous derivation of the asymptotic theories f...

  13. Hydrogen production by recombinant Escherichia coli strains

    OpenAIRE

    Maeda, Toshinari; Sanchez‐Torres, Viviana; Thomas K Wood

    2012-01-01

    Summary The production of hydrogen via microbial biotechnology is an active field of research. Given its ease of manipulation, the best‐studied bacterium Escherichia coli has become a workhorse for enhanced hydrogen production through metabolic engineering, heterologous gene expression, adaptive evolution, and protein engineering. Herein, the utility of E. coli strains to produce hydrogen, via native hydrogenases or heterologous ones, is reviewed. In addition, potential strategies for increas...

  14. STRESS AND STRAIN ANALYSIS AROUND UNDERGROUND ROOM

    Directory of Open Access Journals (Sweden)

    Krešimir Tor

    2000-12-01

    Full Text Available By excavation of opening in the rock, a stress concentration around the opening occurs. The state of stresses and strains around an opening is analysed by theory of elasticity and by Finite Element Method (FEM.The aim of the paper is to determine the dimension of the FEM model for the stress and strain analysis around an elliptical opening in rock massif. The numerical calculation have been performed for two different boundary conditions: with forces or with displacements. Boundary conditions given by displacements give better approximation in the state of stress and strains. An example of the excavation of a road tunnel is used to represent stress concentration at the opening and the places where the plastic zones occur. The computation has been done after FEM comprising the Hock-Brown criterion of failure. The results of stability analysis point to the zones where failure of the rock material may be anticipa¬ted. This is important when planning and designing the primary supp¬orts. The comparison of the results of numerical modelling and field recording during excavation is of particular significance (the paper is published in Croatian.

  15. Strain sensors for high field pulse magnets

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, Christian [Los Alamos National Laboratory; Zheng, Yan [Los Alamos National Laboratory; Easton, Daniel [Los Alamos National Laboratory; Farinholt, Kevin M [Los Alamos National Laboratory; Park, Gyuhae [Los Alamos National Laboratory

    2009-01-01

    In this paper we present an investigation into several strain sensing technologies that are being considered to monitor mechanical deformation within the steel reinforcement shells used in high field pulsed magnets. Such systems generally operate at cryogenic temperatures to mitigate heating issues that are inherent in the coils of nondestructive, high field pulsed magnets. The objective of this preliminary study is to characterize the performance of various strain sensing technologies at liquid nitrogen temperatures (-196 C). Four sensor types are considered in this investigation: fiber Bragg gratings (FBG), resistive foil strain gauges (RFSG), piezoelectric polymers (PVDF), and piezoceramics (PZT). Three operational conditions are considered for each sensor: bond integrity, sensitivity as a function of temperature, and thermal cycling effects. Several experiments were conducted as part of this study, investigating adhesion with various substrate materials (stainless steel, aluminum, and carbon fiber), sensitivity to static (FBG and RFSG) and dynamic (RFSG, PVDF and PZT) load conditions, and sensor diagnostics using PZT sensors. This work has been conducted in collaboration with the National High Magnetic Field Laboratory (NHMFL), and the results of this study will be used to identify the set of sensing technologies that would be best suited for integration within high field pulsed magnets at the NHMFL facility.

  16. Integrated strain array for cellular mechanobiology studies

    Science.gov (United States)

    Simmons, C. S.; Sim, J. Y.; Baechtold, P.; Gonzalez, A.; Chung, C.; Borghi, N.; Pruitt, B. L.

    2011-05-01

    We have developed an integrated strain array for cell culture enabling high-throughput mechano-transduction studies. Biocompatible cell culture chambers were integrated with an acrylic pneumatic compartment and microprocessor-based control system. Each element of the array consists of a deformable membrane supported by a cylindrical pillar within a well. For user-prescribed waveforms, the annular region of the deformable membrane is pulled into the well around the pillar under vacuum, causing the pillar-supported region with cultured cells to be stretched biaxially. The optically clear device and pillar-based mechanism of operation enables imaging on standard laboratory microscopes. Straightforward fabrication utilizes off-the-shelf components, soft lithography techniques in polydimethylsiloxane and laser ablation of acrylic sheets. Proof of compatibility with basic biological assays and standard imaging equipment were accomplished by straining C2C12 skeletal myoblasts on the device for 6 h. At higher strains, cells and actin stress fibers realign with a circumferential preference.

  17. Shewanella strain isolated from black powder

    Energy Technology Data Exchange (ETDEWEB)

    Lutterbach, Marcia T.S.; Contador, Luciana S.; Oliveira, Ana Lucia C.; Galvao, Mariana M. [National Institute of Technology (INT), Rio de Janeiro, RJ (Brazil); Pimenta, Gutemberg S. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2009-07-01

    Black powder is a term frequently used to refer to residues formed by various types of iron sulfides mixed with contaminants eventually present in the natural gas flow. According to some researchers, the occurrence of black powder in gas pipelines, besides its chemical corrosion origin, can be directly related to the sulfate-reducing bacteria (SRB) metabolism in this environment. A black powder sample was inoculated in a Post gate E medium modified with the addition of thioglycolate. The resulting positive culture was kept in the laboratory for four years until its use. A dilution technique was then performed aiming to isolate an SRB strain. The bacterial strain isolated and identified through DNA sequencing was not an SRB but rather a Shewanella sp. Compared to the sulfate-reducing bacteria group-traditionally considered the foremost responsible for microbially-influenced corrosion (MIC) - Shewanella is a facultative anaerobe and has a versatile metabolism. Shewanella is able to reduce ferric iron and sulfite, oxidize hydrogen gas, and produce hydrogen sulfide; therefore, these bacteria can be responsible for MIC and pit formation. The isolated Shewanella was used in a corrosion experiment, and the corrosion products were characterized by X-ray diffraction, identifying iron sulfides, iron oxides, and sulfur. Our results indicate that the strain isolated, S. putrefaciens, plays a key role in corrosion problems in gas pipelines. (author)

  18. Sorbitol production using recombinant Zymomonas mobilis strain.

    Science.gov (United States)

    Liu, Changjun; Dong, Hongwei; Zhong, Jianjiang; Ryu, Dewey D Y; Bao, Jie

    2010-07-20

    A recombinant Zymomonas mobilis strain harboring the plasmid pHW20a-gfo for over-expression of glucose-fructose oxidoreductase (GFOR) was constructed. The specific activity of GFOR enzyme in the new recombinant strain was at least two folds greater than that in the wild strain. The maximum GFOR activity achieved in terms of the volumetric, and the cellular were 2.59 U ml(-1), and 0.70 U mg(-1), respectively, in the batch cultures. A significant improvement of the bioconversion process for the production of sorbitol and gluconic acid from glucose and fructose was made using divalent metal ions which drastically reduced the ethanol yield and significantly increased the yield of target product. Among several divalent metal ions evaluated, Zn(2+) was found to be most effective by inhibiting the Entner-Doudoroff pathway enzymes. The yield of the byproduct ethanol was reduced from 16.7 to 1.8 gl(-1) and the sorbitol yield was increased to almost 100% from 89%. The Ca(2+) enhanced the sorbitol yield and the formation of calcium gluconate salt made the separation of gluconate from the reaction system easier.

  19. Advanced high temperature static strain sensor development

    Science.gov (United States)

    Hulse, C. O.; Stetson, K. A.; Grant, H. P.; Jameikis, S. M.; Morey, W. W.; Raymondo, P.; Grudkowski, T. W.; Bailey, R. S.

    1986-01-01

    An examination was made into various techniques to be used to measure static strain in gas turbine liners at temperatures up to 1150 K (1600 F). The methods evaluated included thin film and wire resistive devices, optical fibers, surface acoustic waves, the laser speckle technique with a heterodyne readout, optical surface image and reflective approaches and capacitive devices. A preliminary experimental program to develop a thin film capacitive device was dropped because calculations showed that it would be too sensitive to thermal gradients. In a final evaluation program, the laser speckle technique appeared to work well up to 1150 K when it was used through a relatively stagnant air path. The surface guided acoustic wave approach appeared to be interesting but to require too much development effort for the funds available. Efforts to develop a FeCrAl resistive strain gage system were only partially successful and this part of the effort was finally reduced to a characterization study of the properties of the 25 micron diameter FeCrAl (Kanthal A-1) wire. It was concluded that this particular alloy was not suitable for use as the resistive element in a strain gage above about 1000 K.

  20. Job strain and the risk of stroke

    DEFF Research Database (Denmark)

    Fransson, Eleonor I; Nyberg, Solja T; Heikkilä, Katriina;

    2015-01-01

    studies to investigate the association between job strain, a measure of work-related stress, and incident stroke. RESULTS: In 1.8 million person-years at risk (mean follow-up 9.2 years), 2023 first-time stroke events were recorded. The age- and sex-adjusted hazard ratio for job strain relative to no job......BACKGROUND AND PURPOSE: Psychosocial stress at work has been proposed to be a risk factor for cardiovascular disease. However, its role as a risk factor for stroke is uncertain. METHODS: We conducted an individual-participant-data meta-analysis of 196 380 males and females from 14 European cohort...... strain was 1.24 (95% confidence interval, 1.05;1.47) for ischemic stroke, 1.01 (95% confidence interval, 0.75;1.36) for hemorrhagic stroke, and 1.09 (95% confidence interval, 0.94;1.26) for overall stroke. The association with ischemic stroke was robust to further adjustment for socioeconomic status...

  1. Measuring Lattice Strain in Three Dimensions through Electron Microscopy

    NARCIS (Netherlands)

    Goris, B.; Beenhouwer, J. de; Backer, A. de; Zanaga, D.; Batenburg, K.J.; Sánchez-Iglesias, A.; Liz-Marzán, L.M.; Aert, S. van; Sijbers, J.; Bals, S.; Tendeloo, G. van

    2015-01-01

    The three-dimensional (3D) atomic structure of nanomaterials, including strain, is crucial to understand their properties. Here, we investigate lattice strain in Au nanodecahedra using electron tomography. Although different electron tomography techniques enabled 3D characterizations of nanostructur

  2. Influence of plastic strain on deformation-induced martensitic transformations

    NARCIS (Netherlands)

    Perdahcıoğlu, E.S.; Geijselaers, H.J.M.; Groen, M.

    2008-01-01

    The effects of plastic strain on deformation-induced martensitic transformations have been investigated experimentally. Austenitic metastable stainless steel samples were heated to a temperature at which the transformation is suppressed and were plastically strained to different amounts. The resulti

  3. Effects of strain on the Schwinger pair creation in graphene

    Energy Technology Data Exchange (ETDEWEB)

    Fanbanrai, P. [Department of Physics, Faculty of Science, Kasetsart University, Bangkok 10900 (Thailand); Hutem, A. [Department of Physics, Faculty of Science, Kasetsart University, Bangkok 10900 (Thailand); Physics Division, Faculty of Science and Technology, Phetchabun Rajabhat University, Phetchabun 67000 (Thailand); Boonchui, S., E-mail: fscistb@ku.ac.th [Department of Physics, Faculty of Science, Kasetsart University, Bangkok 10900 (Thailand); Center of Excellence in Forum for Theoretical Science, Chulalongkorn University, Bangkok 10330 (Thailand)

    2015-09-01

    The effects of strain on mechanically deformed graphene are determined by looking at how the strain affects the amplitude of the Schwinger two particle pair state. The influences of the lattice distortions, such as isotropic tensile strain ϵ{sub is}, shear strain ϵ{sub ss}, uniaxial armchair strain ϵ{sub as}, and zigzag strain ϵ{sub zs}, on the photon emission spectrum have been analyzed. We find that the intensities of the emission increases or decreases when compared to those of the unstrained graphene, depending on the type of strain applied. Thus the structure of energy band, the frequencies of the photons and the emission spectrum can be controlled by use of the different strains.

  4. Strain gauge sensitivity improved by using a composite beam

    Science.gov (United States)

    Silver, R. H.; Kalfayan, S. H.

    1975-01-01

    Composite beam connected to strain gauge and mounted on test specimen is capable of amplifying small strains by factor of 10. Tests indicate that resulting output can be 10 times greater than standard method.

  5. Electronic structure and optic absorption of phosphorene under strain

    Science.gov (United States)

    Duan, Houjian; Yang, Mou; Wang, Ruiqiang

    2016-07-01

    We studied the electronic structure and optic absorption of phosphorene (monolayer of black phosphorus) under strain. Strain was found to be a powerful tool for the band structure engineering. The in-plane strain in armchair or zigzag direction changes the effective mass components along both directions, while the vertical strain only has significant effect on the effective mass in the armchair direction. The band gap is narrowed by compressive in-plane strain and tensile vertical strain. Under certain strain configurations, the gap is closed and the energy band evolves to the semi-Dirac type: the dispersion is linear in the armchair direction and is gapless quadratic in the zigzag direction. The band-edge optic absorption is completely polarized along the armchair direction, and the polarization rate is reduced when the photon energy increases. Strain not only changes the absorption edge (the smallest photon energy for electron transition), but also the absorption polarization.

  6. Strain limit dependence on stress triaxiality for pressure vessel steel

    Science.gov (United States)

    Deng, Y.-C.; Chen, G.; Yang, X.-F.; Xu, T.

    2009-08-01

    In this paper, the failure characteristics of pressure vessel materials were investigated, and measurement and analysis approaches for ductile fracture strains were studied. Based on uniaxial tensile tests of notched round bar specimens, combined with finite element analyses and microscopic observations of fracture surface, the relationships between the stress triaxiality factor and the ductile fracture strain are proposed for three typical Chinese pressure vessel steels, 16MnR, Q235 and 0Cr18Ni9. The comparison of experimental fracture strains with the multiaxial strain limit specified in ASME VIII-2 2007 shows that the strain limit criterion of ASME is suitable for carbon steels but not suitable for austenitic stainless steels for Chinese pressure vessel steels. To improve the calculation accuracy for fracture strain of materials and to develop the strain limit criterion for Chinese pressure vessel materials, more experimental studies and numerical analyses on fracture strain are necessary.

  7. Long term strain behavior of PMMA based polymer optical fibers

    DEFF Research Database (Denmark)

    Bundalo, Ivan-Lazar; Nielsen, Kristian; Woyessa, Getinet;

    2015-01-01

    We are reporting on the viscoelasticity of PMMA based Fiber Bragg Grating (FBG) strain sensors when exposed to repeated sequences of long term strain and relaxation with various duty-cycles. In terms of the FBG wavelength and how it follows the strain cycle, we have shown that in the small strain...... regime (up to 1%) an elastic-dominated fast relaxing range, which is followed by a mainly viscous relaxation, depends both on the strain level and on the strain duration. For a small ratio of the strain-relax durations, this fast relaxation range stays almost the same. However, with increasing strain...... duration, for the same relaxation time, this range will be shortened, which might influence the sensing capabilities of the fiber sensor....

  8. Speak Up! But Don't Strain Your Voice

    Science.gov (United States)

    ... Home Current Issue Past Issues Hearing Disorders Speak Up! But don't strain your voice Past Issues / ... Noise Exposure / How Loud Is Too Loud? / Speak Up! But don't strain your voice / Medical Mystery: ...

  9. Ultrafast vascular strain compounding using plane wave transmission

    NARCIS (Netherlands)

    Hansen, H.H.G.; Saris, A.E.C.M.; Vaka, N.R.; Nillesen, M.M.; Korte, C.L. de

    2014-01-01

    Deformations of the atherosclerotic vascular wall induced by the pulsating blood can be estimated using ultrasound strain imaging. Because these deformations indirectly provide information on mechanical plaque composition, strain imaging is a promising technique for differentiating between stable an

  10. Oxytocin and the oxytocin receptor underlie intra-strain, but not inter-strain, social recognition

    Science.gov (United States)

    Macbeth, Abbe H.; Lee, Heon-Jin; Edds, Jennifer; Young, W. Scott

    2009-01-01

    We studied three lines of oxytocin (Oxt) and oxytocin receptor (Oxtr) knockout (KO) male mice (Oxt−/−, total Oxtr−/−, and partial-forebrain Oxtr (OxtrFB/FB)) with established deficits in social recognition to further refine our understanding of their deficits with regard to stimulus female's strain. We used a modified social discrimination paradigm in which subjects are singly housed only for the duration of the test. Additionally, stimulus females are singly-housed throughout testing and are presented within corrals for rapid comparison of investigation by subject males. Wildtype (WT) males from all three lines discriminated between familiar and novel females of three different strains (C57BL/6, Balb/c, Swiss-Webster). No KO males discriminated between familiar and novel Balb/c or C57BL/6 females. Male Oxt−/− and Oxtr−/− mice, but not OxtrFB/FB mice, discriminated between familiar and novel Swiss-Webster females. As this might indicate a global deficit in individual recognition for OxtrFB/FB males, we examined their ability to discriminate between females from different strains and compared performance with Oxtr−/− males. WT and KO males from both lines were able to distinguish between familiar and novel females from different strains, indicating the social recognition deficit is not universal. Instead, we hypothesize that the Oxtr is involved in “fine” intra-strain recognition, but is less important in “broad” inter-strain recognition. We also present the novel finding of decreased investigation across tests, which is likely an artifact of repeated testing and not due to stimulus female's strain or age of subject males. PMID:19531157

  11. EVALUATION OF LOCAL STRAIN EVOLUTION FROM METALLIC WHISKER FORMATION

    Energy Technology Data Exchange (ETDEWEB)

    Hoffman, E.; Lam, P.

    2011-05-11

    Evolution of local strain on electrodeposited tin films upon aging has been monitored by digital image correlation (DIC) for the first time. Maps of principal strains adjacent to whisker locations were constructed via comparing pre- and post-growth scanning electron microscopy (SEM) images. Results showed that the magnitude of the strain gradient plays an important role in whisker growth. DIC visualized the dynamic growth process in which the alteration of strain field has been identified to cause growth of subsequent whiskers.

  12. Psychological Strains and Youth Suicide in Rural China

    OpenAIRE

    Zhang, Jie; Wieczorek, William F.; Conwell, Yeates; Tu, Xin Ming

    2011-01-01

    The strain theory of suicide postulates that suicide is usually preceded by psychological strains. A strain can be a consequence of any of four conflicts: differential values, aspiration and reality, relative deprivation, and lack of coping skills for a crisis. This study, with a blend of psychiatric and social predictors of suicide, identified correlates of suicide that are relevant to Chinese culture and tested the strain theory of suicide with Chinese data. We sampled 392 suicides and 416 ...

  13. Metamaterial based telemetric strain sensing in different materials

    OpenAIRE

    Melik, Rohat; Unal, Emre; Perkgoz, Nihan Kosku; Puttlitz, Christian; Demir, Hilmi Volkan

    2010-01-01

    We present telemetric sensing of surface strains on different industrial materials using split-ring-resonator based metamaterials. For wireless strain sensing, we utilize metamaterial array architectures for high sensitivity and low nonlinearity-errors in strain sensing. In this work, telemetric strain measurements in three test materials of cast polyamide, derlin and polyamide are performed by observing operating frequency shift under mechanical deformation and these data are compared with c...

  14. Improved Degradation of Monochlorophenols by a Constructed Strain

    OpenAIRE

    Schwien, Uwe; Schmidt, Eberhard

    1982-01-01

    Pseudomonas sp. strain B13, a strain able to degrade 3-chlorobenzoate and, after prolonged adaptation (40 days), 4-chlorophenol, could transfer the ability to degrade chlorocatechols to a recipient, Alcaligenes sp. strain A7, which is able to grow with benzoate and phenol. Representative transconjugants, such as Alcaligenes sp. strain A7-2, were able to utilize all three isomeric chlorophenols; this property was not possessed by the donor or the recipient. The ability to grow readily with 4-c...

  15. Cross protection among Haemophilus parasuis strains in immunized gnotobiotic pigs.

    OpenAIRE

    Miniats, O. P.; Smart, N L; Rosendal, S

    1991-01-01

    In an attempt to establish if cross protection can be induced by different strains of Haemophilus parasuis, three groups of 12 gnotobiotic pigs were immunized each with an aluminum hydroxide adsorbed whole cell bacterin of one of three H. parasuis strains. Two weeks later, four pigs within each vaccinated group were challenged with aerosols of live cultures of each of the three test strains and observed for response. Two virulent strains V1 and V2 protected all the vaccinated pigs, while all ...

  16. Estimating Ground Inclination Using Strain Sensors with Fourier Series Representation

    OpenAIRE

    Ulf Holmberg; Wolfgang Svensson

    2010-01-01

    An embedded measurement system for foot orthosis during gait is proposed. Strain gauge sensors were mounted on a foot orthosis to give information about strain in the sagittal plane. The ankle angle of the orthosis was fixed and strain characteristics were therefore changed when walking on slopes. With a Fourier series representation of the strain during a gait cycle, ground angle at different walking speeds and inclinations could be estimated with similar accuracy as previous studies using k...

  17. Strain-induced changes to the electronic structure of germanium

    KAUST Repository

    Tahini, H. A.

    2012-04-17

    Density functional theory calculations (DFT) are used to investigate the strain-induced changes to the electronic structure of biaxially strained (parallel to the (001), (110) and (111) planes) and uniaxially strained (along the [001], [110] and [111] directions) germanium (Ge). It is calculated that a moderate uniaxial strain parallel to the [111] direction can efficiently transform Ge to a direct bandgap material with a bandgap energy useful for technological applications. © 2012 IOP Publishing Ltd.

  18. PHYLOGENETIC STUDY OF SOME STRAINS OF DUNALIELLA

    OpenAIRE

    Duc Tran; Trung Vo; Sixto Portilla; Clifford Louime; Nguyen Doan; Truc Mai; Dat Tran; Trang Ho

    2013-01-01

    Dunaliella strains were isolated from a key site for salt production in Vietnam (Vinh Hao, Binh Thuan province). The strains were identified based on Internal Transcribed Spacer (ITS) markers. The phylogenetic tree revealed these strains belong to the clades of Dunaliella salina and Dunaliella viridis. Results of this study confirm the ubiquitous nature of Dunaliella and suggest that strains of Dunaliella salina might be acquired locally worldwide for the production of beta-carotene. The iden...

  19. Distribution of Longitudinal Inherent Strains in Multiple-passes Welding

    Institute of Scientific and Technical Information of China (English)

    Peng HE; Jiuhai ZHANG; Toshio Terasaki; Testuya Akiyama

    2001-01-01

    A fundamental theory for the analysis of residual welding stresses and deformation based on the inherent strain distribution along the welded joint is introduced. The computing method of distribution of longitudinal inherent strains in multiple-passes welding in heavy plate weldment is proposed. Distribution of longitudinal inherent strains in one-pass welding and two-passes welding are compared and analyzed. The effect of cutting on inherent strain is discussed.

  20. Bordetella pertussis Strain Lacking Pertactin and Pertussis Toxin.

    Science.gov (United States)

    Williams, Margaret M; Sen, Kathryn; Weigand, Michael R; Skoff, Tami H; Cunningham, Victoria A; Halse, Tanya A; Tondella, M Lucia

    2016-02-01

    A Bordetella pertussis strain lacking 2 acellular vaccine immunogens, pertussis toxin and pertactin, was isolated from an unvaccinated infant in New York State in 2013. Comparison with a French strain that was pertussis toxin-deficient, pertactin wild-type showed that the strains carry the same 28-kb deletion in similar genomes.

  1. Fabrication and mechanical characterisation of inkjet printed strain gauges

    NARCIS (Netherlands)

    Visser, H.A.; Balda Irurzun, U.; Akkerman, R.; Sridhar, A.

    2011-01-01

    The present study focuses on printing strain sensors directly on tensile test specimens using inkjet printing technology. This type of strain gauges has the advantage over conventional strain gauges that no glue or carrying platelet is present between the sensor and the surface that should be measur

  2. Complete Genome Sequence of Vaccinia Virus Strain L-IVP

    Science.gov (United States)

    Shvalov, Alexander N.; Sivolobova, Galina F.; Kuligina, Elena V.

    2016-01-01

    Most of the live vaccine doses of vaccinia virus donated to the Intensified Smallpox Eradication Programme after 1971 were prepared using the L-IVP strain. A mixture of three clones of the L-IVP strain was sequenced using MySEQ. Consensus sequence similarity with the vaccinia virus Lister strain is 99.5%. PMID:27174282

  3. Antimalarial effect of agmatine on Plasmodium berghei K173 strain

    Institute of Scientific and Technical Information of China (English)

    SURui-Bin; WEIXiao-Li; LIUYin; LIJin

    2003-01-01

    AIM: To study the antimalarial effect of agmatine (Agm) on chloroquine-susceptible Plasmodium berghei K173strain (S strain) and the P berghei K173 resistant strain (R strain). METHODS: The antimalarial effects of Agm onP berghei K173 S strain and R strain were evaluated by Peters 4-d suppression test in mice. RESULTS: Agm(12.5-200 mg/kg,ig,daily) decreased the parasitemia for both P berghei K173 S strain (IC50=139 mg/kg) and Rstrain (IC50=126mg/kg) in mice. Subcutaneous injection (sc) of Agm (5-40mg/kg,tid) showed relatively strongerantimalarial effect than intragastric gavage (IC50=30 mg/kg) in P berghei K 173 S strain. Spermidine antagonized theantimalarial effect of Agm for P berghei K173 S strain and R strain. Agm did not reverse the chloroquine resistanceof P berghei K173 S strain, dl-α-Difluoromethylornithine (DFMO, sc) decreased the parasitemia of P BergheiK173 S strain and this effect was antagonized by spermidine. CONCLUSION: Agm has an antimalarial effect andthe mechanism is related to its inhibition of polyamine synthesis.

  4. Size-effects in plane strain sheet-necking

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Redanz, Pia

    2004-01-01

    A finite strain generalization of the strain gradient plasticity theory by Fleck and Hutchinson (J. Mech. Phys. Solids 49 (2001a) 2245) is proposed and used to study size effects in plane strain necking of thin sheets using the finite element method. Both sheets with rigid grips at the ends and...

  5. Size-effects in plane strain sheet-necking

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Redanz, Pia

    2003-01-01

    A finite strain generalization of the strain gradient plasticity theory by Fleck and Hutchinson (2001) is proposed and used to study size effects in plane strain necking of thin sheets using the finite element method. Both sheets with rigid grips at the ends and specimens with shear free ends are...

  6. Differences in taste in button mushroom strains (Agaricus bisporus)

    NARCIS (Netherlands)

    Baars, J.J.P.; Stijger, I.; Kersten, M.; Sonnenberg, A.S.M.

    2014-01-01

    This report describes the results of a screening of genetically diverse strains of mushroom Agaricus bisporus for differences in taste. Eight different strains were grown on regular commercial compost and casing soil. Two of these strains were also grown on a casing with calcium chloride added to in

  7. Flexible Bond Wire Capacitive Strain Sensor for Vehicle Tyres.

    Science.gov (United States)

    Cao, Siyang; Pyatt, Simon; Anthony, Carl J; Kubba, Ammar I; Kubba, Ali E; Olatunbosun, Oluremi

    2016-01-01

    The safety of the driving experience and manoeuvrability of a vehicle can be improved by detecting the strain in tyres. To measure strain accurately in rubber, the strain sensor needs to be flexible so that it does not deform the medium that it is measuring. In this work, a novel flexible bond wire capacitive strain sensor for measuring the strain in tyres is developed, fabricated and calibrated. An array of 25 micron diameter wire bonds in an approximately 8 mm × 8 mm area is built to create an interdigitated structure, which consists of 50 wire loops resulting in 49 capacitor pairs in parallel. Laser machining was used to pattern copper on a flexible printed circuit board PCB to make the bond pads for the wire attachment. The wire array was finally packaged and embedded in polydimethylsiloxane (PDMS), which acts as the structural material that is strained. The capacitance of the device is in a linear like relationship with respect to the strain, which can measure the strain up to at least ±60,000 micro-strain (±6%) with a resolution of ~132 micro-strain (0.013%). In-tyre testing under static loading has shown the ability of the sensor to measure large tyre strains. The technology used for sensor fabrication lends itself to mass production and so the design is considered to be consistent with low cost commercialisable strain sensing technology. PMID:27338402

  8. The Lewis Strain Gauge Laboratory: Status and plans

    Science.gov (United States)

    Hobart, Howard F.; Will, Herbert A.

    1985-01-01

    An in-house lab was established for developing, testing, and evaluating high-temperature strain gauges and to aid in in-house applications of high-temperature strain instrumentation. The lab is automated to provide computer control of oven temperatures, imposed strain, and data sampling.

  9. Flexible Bond Wire Capacitive Strain Sensor for Vehicle Tyres

    Science.gov (United States)

    Cao, Siyang; Pyatt, Simon; Anthony, Carl J.; Kubba, Ammar I.; Kubba, Ali E.; Olatunbosun, Oluremi

    2016-01-01

    The safety of the driving experience and manoeuvrability of a vehicle can be improved by detecting the strain in tyres. To measure strain accurately in rubber, the strain sensor needs to be flexible so that it does not deform the medium that it is measuring. In this work, a novel flexible bond wire capacitive strain sensor for measuring the strain in tyres is developed, fabricated and calibrated. An array of 25 micron diameter wire bonds in an approximately 8 mm × 8 mm area is built to create an interdigitated structure, which consists of 50 wire loops resulting in 49 capacitor pairs in parallel. Laser machining was used to pattern copper on a flexible printed circuit board PCB to make the bond pads for the wire attachment. The wire array was finally packaged and embedded in polydimethylsiloxane (PDMS), which acts as the structural material that is strained. The capacitance of the device is in a linear like relationship with respect to the strain, which can measure the strain up to at least ±60,000 micro-strain (±6%) with a resolution of ~132 micro-strain (0.013%). In-tyre testing under static loading has shown the ability of the sensor to measure large tyre strains. The technology used for sensor fabrication lends itself to mass production and so the design is considered to be consistent with low cost commercialisable strain sensing technology. PMID:27338402

  10. Nociception and Conditioned Fear in Rats: Strains Matter

    NARCIS (Netherlands)

    Schaap, M.W.H.; van Oostrom, H.; Doornenbal, A.; van 't Klooster, J.; Baars, A.M.; Arndt, S.S.; Hellebrekers, L.J.

    2013-01-01

    When using rats in pain research, strain-related differences in outcomes of tests for pain and nociception are acknowledged. However, very little is known about the specific characteristics of these strain differences. In this study four phylogenetically distant inbred rat strains, i.e. Wistar Kyoto

  11. Measuring autogenous strain of concrete with corrugated moulds

    DEFF Research Database (Denmark)

    Tian, Qian; Jensen, Ole Mejlhede

    2008-01-01

    A reliable technique to quantify autogenous strain is a prerequisite to numerical modeling in stress calculations for high performance concrete. The introducing of a special kind of corrugated tube mould helps to transforming volume strain measurement into liner strain measurement in horizontal...

  12. Longitudinal growth strains in five clones of Eucalyptus tereticornis Sm.

    Institute of Scientific and Technical Information of China (English)

    Pankaj Aggarwal; Shakti Chauhan

    2013-01-01

    We studied the variability in longitudinal growth strains and wood basic density in five-year old trees from five clones (one tree per clone) of Eucalyptus tereticornis.Mean longitudinal growth strain in clones ranged from 466 to 876 μm.There was a significant difference between clones in growth strains and wood basic density.Clone 10 exhibited maximum growth strains and basic density,whereas clone 3 and clone 7 exhibited minimum growth strains and basic density,respectively.Within a tree,the growth strain variation with tree height was high but statistically insignificant while within tree variation in basic density was very small.There was no specific trend in variation in either strain or density within a tree.There was 5%-200% difference in growth strain on opposite sides of the logs.However two strains showed a strong positive correlation.There was a moderate positive association of wood basic density and mean growth strains in logs.The variation around the periphery emphasize the need to measure strain more than one,preferably on opposite sides at the same height,on a tree to know the mean strain level for the purpose of selection of clones.

  13. Biochemical Characterization of Prion Strains in Bank Voles

    Directory of Open Access Journals (Sweden)

    Romolo Nonno

    2013-07-01

    Full Text Available Prions exist as different strains exhibiting distinct disease phenotypes. Currently, the identification of prion strains is still based on biological strain typing in rodents. However, it has been shown that prion strains may be associated with distinct PrPSc biochemical types. Taking advantage of the availability of several prion strains adapted to a novel rodent model, the bank vole, we investigated if any prion strain was actually associated with distinctive PrPSc biochemical characteristics and if it was possible to univocally identify strains through PrPSc biochemical phenotypes. We selected six different vole-adapted strains (three human-derived and three animal-derived and analyzed PrPSc from individual voles by epitope mapping of protease resistant core of PrPSc (PrPres and by conformational stability and solubility assay. Overall, we discriminated five out of six prion strains, while two different scrapie strains showed identical PrPSc types. Our results suggest that the biochemical strain typing approach here proposed was highly discriminative, although by itself it did not allow us to identify all prion strains analyzed.

  14. Screening of flocculant-producing strains by NTG mutagenesis

    Institute of Scientific and Technical Information of China (English)

    HUANG Xiao-wu; CHENG Wen; HU Yong-you

    2005-01-01

    Screening of new microorganism being able to produce efficiently flocculants was carried out. A new model for screening efficient flocculant-producing strains was designed and tested. The results showed that this model for screening efficient flocculant-producing strains is very reliable and can greatly shorten the screening period. 13 flocculant-producing strains were isolated from activated sludge by conventional method. A strain, designated as HHE6, produced the bioflocculant with the turbidity removal 98% for kaolin suspension. Six of 13 strains selected as the original strains were treated with NTG as mutagen, and five mutant strains(HHE-P7, HHE-A8, HHE-P21,HHE-P24, HHE-A26) with high flocculation efficiency was obtained by selection, which exhibited the flocculation rate for kaolin suspension above 90%. Strains HHE6, HHE-P7, and HHE-P24 were classified as Penicillium purpurogenum, HHE-P21 as Penicillium cyclopium,HHE-A26 as Aspergillus versicolor and HHE-A8 as Aspergillus fumigatus, and it is hitherto unreported for biofloccutant-producing strains of Penicillium. The growth of the six strains(HHE6, HHE-P7, HHE-A8, HHE-P21, HHE-P24, HHE-A26) had similar curves, i.e. firstly increasing rapidly, keeping relatively constant then and finally decreasing gradually with cultivation time. The production of bioflocculants by strains showed the similar pattern to strain growth.

  15. Towards quantification of the interplay between strain weakening and strain localisation in granular material

    Science.gov (United States)

    Ritter, Malte C.; Rosenau, Matthias; Leever, Karen; Oncken, Onno

    2014-05-01

    Strain weakening is the major agent of localisation of deformation into shear zones and faults at various scales in brittle media. Physical analogue models using granular material are especially apt to investigate both phenomena, because they are able to reproduce them without the need of any assumptions concerning the physics behind. Several attempts have been made to quantify either strain weakening (e. g. Lohrmann et al., 2003, using Ring-Shear tests) or strain localisation (e. g. Schrank et al., 2008, using a variation of the classical Riedel-experiment). While Ring-Shear tests yield excellent data on strain weakening through measuring shear stress during localisation, they do not allow monitoring the process of strain localisation in-situ because of experimental inaccessibility of the small scale kinematics. In Riedel-type strike-slip experiments, on the other hand, no direct measurements of shear stresses have been available so far. Furthermore, they contain a strong boundary condition in form of a pre-defined linear discontinuity at the base. This forces the formation of Riedel-Shears, i. e. a complex fault system, that makes it difficult to define strain localisation on single faults. We developed a new experimental set-up, in which the formation of a strike-slip shear zone in granular material is induced using an ndenter with stress and strain monitored at high accuracy and resolution. In a first set of experiments we used a horizontal sand layer indented by a vertical wall. The sand layer is laterally unconfined and rests on low-viscosity silicone oil in order to minimize basal shear strength. Compared to the Riedel experiments, this avoids the boundary condition of a pre-existing basal discontinuity allowing one single, hrough-going shear crack to form and propagate. The indenter moves at a constant rate and is equipped with a force sensor that measures the applied push, which integrates over shear stresses along the fault and the base of the sand pack

  16. Strain and strain rate: An emerging technology in the perioperative period.

    Science.gov (United States)

    Malik, Vishwas; Subramaniam, Arun; Kapoor, Poonam Malhotra

    2016-01-01

    Newer noninvasive parameters are being used for perioperative detection of myocardial ischaemia. TDI and global strain rate are some of these parameters. TDI signal is a modification of the routine Doppler flow signal. It is obtained by using thresholding and filtering algorithms that reject echoes originating from the blood pool (by-passing the high pass filter). Set-Up of the machine by activating the TDI function allows decreasing the system gain using a low pass filter and eliminates the signal produced by blood flow. Doppler shift obtained from myocardial tissue motion are of higher amplitudes (reflectivity 40 dB higher) and move about 10 times slower than blood (velocity range: 0.06 to 0.24 m/s). Speckle tracking echocardiography (tissue tracking, 2D strain) utilizes routine gray-scale 2D echo images to calculate myocardial strain. Interactions of ultrasound with myocardium result in reflection and scattering. These interactions generate a finely gray-shaded, speckled pattern (acoustic marker). This speckled pattern is unique for each myocardial region and relatively stable throughout the cardiac cycle. Spatial and temporal image processing of acoustic speckles in both 2D and 3D allows for the calculation of myocardial velocity, strain, and Strain rate.

  17. THE EFFECT OF DIFFERENT PROBIOTIC STRAINS ON FATTENINTHE EFFECT OF DIFFERENT PROBIOTIC STRAINS ON F

    Directory of Open Access Journals (Sweden)

    Cyril Hrnčár

    2013-02-01

    Full Text Available The aim of this work was to verify the effect of different probiotic strains applied through a drinking water source to fattening and carcass parameters of broiler ducks. Fattening experiment was realised in half-operating conditions of experimental basis of Department of Poultry Science and Small Animal Husbandry in three-floor cage technology. Totally 90 broiler duck were divided to three groups. Experimental group 1 (n=30 received probiotic strain Lactobacillus fermentum CCM 7158 with concentration of 1x109 colony forming units (CFU in drinking water daily addition of 0.90 g day 1 to day 56 of fattening. Experimental group 2 (n=30 received probiotic strain Enterococcus faecium M 74 with concentration of 1x109 colony forming units (CFU in drinking water daily addition of 0.45 g day 1 to day 56 of fattening. The control group of birds (n=30 received water without any probiotics. The supplementation of probiotic strains Lactobacillus fermentum and Enterococcus faecium no significant affected (P≥0.05 final body weight, feed consumption and mortality of broiler ducks. From carcass parameters, we recorded statistically significant (P<0.05 reduction in weight of abdominal fat of broiler ducks for application of tested probiotic strains.

  18. Prediction of critical current-bending strain relation of Bi2223 composite tape using residual strain of filaments, load-strain curve and geometry of cross-section

    Energy Technology Data Exchange (ETDEWEB)

    Ochiai, S., E-mail: shojiro.ochiai@materials.mbox.media.kyoto-u.ac.j [Department of Materials Science and Engineering, Graduate School of Engineering, Kyoto University, Yoshida, Sakyo-ku, Kyoto 606-8501 (Japan); Okuda, H.; Matsubayashi, H.; Mukai, Y.; Shin, J.K.; Iwamoto, S.; Hojo, M. [Department of Materials Science and Engineering, Graduate School of Engineering, Kyoto University, Yoshida, Sakyo-ku, Kyoto 606-8501 (Japan); Sato, M. [Japan Synchrotron-Radiation Research Institute (JASRI), Kohto, Sayo 679-5198 (Japan); Osamura, K. [Research Institute for Applied Sciences, Sakyo-ku, Kyoto 606-8202 (Japan); Mimura, M. [Metal Research Center, Furukawa Electric Co. Ltd., Kiyotaki 500, Nikko 321-1493 (Japan)

    2009-10-15

    A prediction method of the critical current-bending strain relation of the Bi2223 composite tape, which was bent at room temperature and cooled down to 77 K for measurement of critical current, was presented. The present method consisted of (a) measurement of residual strain of Bi2223 filaments at room temperature in the sample length direction by the X-ray diffraction method, (b) estimation of tensile fracture strain of the filaments from the analysis of the load-strain curve at room temperature, (c) measurement of geometrical factors such as the thickness of the sample and shape of the core by observation of the cross-section with optical microscope, and (d) calculation of the critical current as a function of bending strain by using the measured parameters mentioned in (a)-(c). The predicted variation of critical current with bending strain by the present approach described well the experimental one.

  19. Revealing Differences in Metabolic Flux Distributions between a Mutant Strain and Its Parent Strain Gluconacetobacter xylinus CGMCC 2955

    Science.gov (United States)

    Liu, Miao; Yang, Xiao-Ning; Zhu, Hui-Xia; Jia, Yuan-Yuan; Jia, Shi-Ru; Piergiovanni, Luciano

    2014-01-01

    A better understanding of metabolic fluxes is important for manipulating microbial metabolism toward desired end products, or away from undesirable by-products. A mutant strain, Gluconacetobacter xylinus AX2-16, was obtained by combined chemical mutation of the parent strain (G. xylinus CGMCC 2955) using DEC (diethyl sulfate) and LiCl. The highest bacterial cellulose production for this mutant was obtained at about 11.75 g/L, which was an increase of 62% compared with that by the parent strain. In contrast, gluconic acid (the main byproduct) concentration was only 5.71 g/L for mutant strain, which was 55.7% lower than that of parent strain. Metabolic flux analysis indicated that 40.1% of the carbon source was transformed to bacterial cellulose in mutant strain, compared with 24.2% for parent strain. Only 32.7% and 4.0% of the carbon source were converted into gluconic acid and acetic acid in mutant strain, compared with 58.5% and 9.5% of that in parent strain. In addition, a higher flux of tricarboxylic acid (TCA) cycle was obtained in mutant strain (57.0%) compared with parent strain (17.0%). It was also indicated from the flux analysis that more ATP was produced in mutant strain from pentose phosphate pathway (PPP) and TCA cycle. The enzymatic activity of succinate dehydrogenase (SDH), which is one of the key enzymes in TCA cycle, was 1.65-fold higher in mutant strain than that in parent strain at the end of culture. It was further validated by the measurement of ATPase that 3.53–6.41 fold higher enzymatic activity was obtained from mutant strain compared with parent strain. PMID:24901455

  20. Revealing differences in metabolic flux distributions between a mutant strain and its parent strain Gluconacetobacter xylinus CGMCC 2955.

    Directory of Open Access Journals (Sweden)

    Cheng Zhong

    Full Text Available A better understanding of metabolic fluxes is important for manipulating microbial metabolism toward desired end products, or away from undesirable by-products. A mutant strain, Gluconacetobacter xylinus AX2-16, was obtained by combined chemical mutation of the parent strain (G. xylinus CGMCC 2955 using DEC (diethyl sulfate and LiCl. The highest bacterial cellulose production for this mutant was obtained at about 11.75 g/L, which was an increase of 62% compared with that by the parent strain. In contrast, gluconic acid (the main byproduct concentration was only 5.71 g/L for mutant strain, which was 55.7% lower than that of parent strain. Metabolic flux analysis indicated that 40.1% of the carbon source was transformed to bacterial cellulose in mutant strain, compared with 24.2% for parent strain. Only 32.7% and 4.0% of the carbon source were converted into gluconic acid and acetic acid in mutant strain, compared with 58.5% and 9.5% of that in parent strain. In addition, a higher flux of tricarboxylic acid (TCA cycle was obtained in mutant strain (57.0% compared with parent strain (17.0%. It was also indicated from the flux analysis that more ATP was produced in mutant strain from pentose phosphate pathway (PPP and TCA cycle. The enzymatic activity of succinate dehydrogenase (SDH, which is one of the key enzymes in TCA cycle, was 1.65-fold higher in mutant strain than that in parent strain at the end of culture. It was further validated by the measurement of ATPase that 3.53-6.41 fold higher enzymatic activity was obtained from mutant strain compared with parent strain.

  1. Genome sequence of Brucella abortus vaccine strain S19 compared to virulent strains yields candidate virulence genes

    OpenAIRE

    Crasta, Oswald R.; Folkerts, Otto; Fei, Zhangjun; Mane, Shrinivasrao P.; Evans, Clive; Martino-Catt, Susan; Bricker, Betsy; Yu, GongXin; Du, Lei; Sobral, Bruno W.

    2008-01-01

    The Brucella abortus strain S19, a spontaneously attenuated strain, has been used as a vaccine strain in vaccination of cattle against brucellosis for six decades. Despite many studies, the physiological and molecular mechanisms causing the attenuation are not known. We have applied pyrosequencing technology together with conventional sequencing to rapidly and comprehensively determine the complete genome sequence of the attenuated Brucella abortus vaccine strain S19. The main goal of this st...

  2. Genome Sequence of Brucella abortus Vaccine Strain S19 Compared to Virulent Strains Yields Candidate Virulence Genes

    OpenAIRE

    Crasta, Oswald R.; Otto Folkerts; Zhangjun Fei; Mane, Shrinivasrao P.; Clive Evans; Susan Martino-Catt; Betsy Bricker; GongXin Yu; Lei Du; Sobral, Bruno W.

    2008-01-01

    The Brucella abortus strain S19, a spontaneously attenuated strain, has been used as a vaccine strain in vaccination of cattle against brucellosis for six decades. Despite many studies, the physiological and molecular mechanisms causing the attenuation are not known. We have applied pyrosequencing technology together with conventional sequencing to rapidly and comprehensively determine the complete genome sequence of the attenuated Brucella abortus vaccine strain S19. The main goal of this st...

  3. Myocardial strain and strain rate in monitoring subclinical heart failure in asymptomatic long-term survivors of childhood cancer.

    NARCIS (Netherlands)

    Mavinkurve-Groothuis, A.M.C.; Groot-Loonen, J.J.; Marcus, K.A.; Bellersen, L.; Feuth, T.; Bokkerink, J.P.M.; Hoogerbrugge, P.M.; Korte, C.L. de; Kapusta, L.

    2010-01-01

    We studied the role of global myocardial strain and strain rate in monitoring subclinical heart failure in a large group of asymptomatic long-term survivors of childhood cancer. Global strain (rate) parameters of survivors were compared with those in healthy controls and were related to conventional

  4. An Atypical Clostridium Strain Related to the Clostridium botulinum Group III Strain Isolated from a Human Blood Culture

    OpenAIRE

    Bouvet, Philippe; Ruimy, Raymond; Bouchier, Christiane; Faucher, Nathalie; Mazuet, Christelle; Popoff, Michel R.

    2014-01-01

    A nontoxigenic strain isolated from a fatal human case of bacterial sepsis was identified as a Clostridium strain from Clostridium botulinum group III, based on the phenotypic characters and 16S rRNA gene sequence, and was found to be related to the mosaic C. botulinum D/C strain according to a multilocus sequence analysis of 5 housekeeping genes.

  5. A Comprehensive Test of General Strain Theory: Key Strains, Situational- and Trait-Based Negative Emotions, Conditioning Factors, and Delinquency

    Science.gov (United States)

    Moon, Byongook; Morash, Merry; McCluskey, Cynthia Perez; Hwang, Hye-Won

    2009-01-01

    Using longitudinal data on South Korean youth, the authors addressed limitations of previous tests of general strain theory (GST), focusing on the relationships among key strains, situational- and trait-based negative emotions, conditioning factors, and delinquency. Eight types of strain previously shown most likely to result in delinquency,…

  6. Different distribution patterns of ten virulence genes in Legionella reference strains and strains isolated from environmental water and patients.

    Science.gov (United States)

    Zhan, Xiao-Yong; Hu, Chao-Hui; Zhu, Qing-Yi

    2016-04-01

    Virulence genes are distinct regions of DNA which are present in the genome of pathogenic bacteria and absent in nonpathogenic strains of the same or related species. Virulence genes are frequently associated with bacterial pathogenicity in genus Legionella. In the present study, an assay was performed to detect ten virulence genes, including iraA, iraB, lvrA, lvrB, lvhD, cpxR, cpxA, dotA, icmC and icmD in different pathogenicity islands of 47 Legionella reference strains, 235 environmental strains isolated from water, and 4 clinical strains isolated from the lung tissue of pneumonia patients. The distribution frequencies of these genes in reference or/and environmental L. pneumophila strains were much higher than those in reference non-L. pneumophila or/and environmental non-L. pneumophila strains, respectively. L. pneumophila clinical strains also maintained higher frequencies of these genes compared to four other types of Legionella strains. Distribution frequencies of these genes in reference L. pneumophila strains were similar to those in environmental L. pneumophila strains. In contrast, environmental non-L. pneumophila maintained higher frequencies of these genes compared to those found in reference non-L. pneumophila strains. This study illustrates the association of virulence genes with Legionella pathogenicity and reveals the possible virulence evolution of non-L. pneumophia strains isolated from environmental water. PMID:26757724

  7. Draft Genome Sequence of Bacillus subtilis Strain NKYL29, an Antimicrobial-Peptide-Producing Strain from Soil

    OpenAIRE

    Jiang, Yanbin; Xu, Haijin; Ying LI; Liu, Hongbin; Yu, Lei; Qiao, Mingqiang; Liu, Gang

    2014-01-01

    Bacillus subtilis strain NKYL29 is an antimicrobial-peptide-producing strain isolated from the soil of Ranzhuang Tunnel in Hebei Province, China. Here, we present the draft genome of this strain, which provides the genetic basis for application of the antimicrobial peptide.

  8. Interface strain transfer mechanism and error modification for adhered FBG strain sensor

    Science.gov (United States)

    Li, Jilong; Zhou, Zhi; Ou, Jinping

    2005-06-01

    The application of adhered FBG strain sensor is affected by interface strain transfer and error modification. In his paper, firstly, based on the characterstics of forces and damage, the fundamental hupotheses are given, and the general expression of interface transferring mechanism is derived. After that, united form of the characteristic value-λ for the general equation is geven for the multi-layer coatings. Finally, according to the error-modified equation of adhered FBG sensor, the relationships the error rate η against the shear modulus and the thckness of the glue are given. With regard to the glue applied in engineering (thickness is from 4mm to 60mm, shear modulus is from 30MPa to 200MPa), the error rate η is about 5~10%, and the correction coefficient k is about 1.05~1.11. Hence, the error modification must be considered when adhered FBG strain sensors are used in civil engineering.

  9. Evidence for residual elastic strain in deformed natural quartz

    Energy Technology Data Exchange (ETDEWEB)

    Kunz, Martin; Chen, Kai; Tamura,Nobumichi; Wenk, Hans-Rudolf

    2009-01-30

    Residual elastic strain in naturally deformed, quartz-containing rocks can be measured quantitatively in a petrographic thin section with high spatial resolution using Laue microdiffraction with white synchrotron x-rays. The measurements with a resolution of one micrometer allow the quantitative determination of the deviatoric strain tensor as a function of position within the crystal investigated. The observed equivalent strain values of 800-1200 microstrains represent a lower bound of the actual preserved residual strain in the rock, since the stress component perpendicular to the cut sample surface plane is released. The measured equivalent strain translates into an equivalent stress in the order of {approx} 50 MPa.

  10. Development of a high temperature static strain gage system

    International Nuclear Information System (INIS)

    The objective of this program is to develop electrical resistance strain gages which will permit the measurement of static strains on nickel and cobalt superalloy parts inside gas turbine engines running on a test stand. The specific goal is to develop a complete system able to make strain measurements up to plus or minus 2000 mu strain with a total error of no more than plus or minus 10 percent over a 50 hour period at 1250 K. The initial part of this work consisted of a strain gage alloy development effort in which a variety of alloys were evaluated after being prepared by drop-casting or splat cooling

  11. The dual element method of strain gauge temperature compensation

    Science.gov (United States)

    Englund, David R.

    1987-01-01

    The use of a known temperature compensation technique is suggested to reduce the overall temperature sensitivity of a PdCr strain gauge system being developed for turbine engine research. The temperature compensation technique proposed for this application uses a resistance thermometer in an adjacent leg of the strain gauge bridge circuit to cancel the thermally generated resistance change of the strain gauge. Equations for calculating the required compensation resistor values and the sensitivity of the resulting strain gauge bridge to both temperature and strain are presented.

  12. Genetic variations among Mycoplasma bovis strains isolated from Danish cattle

    DEFF Research Database (Denmark)

    Kusiluka, L.J.M.; Kokotovic, Branko; Ojeniyi, B.;

    2000-01-01

    The genetic heterogeneity of Mycoplasma bovis strains isolated in Denmark over a 17-year period was investigated. Forty-two field strains isolated from different geographic locations and specimens, including strains from 21 herds involved in two outbreaks of M. bovis-induced mastitis, and the type....... Among the analyzed strains, 18 different AFLP profiles were detected. The similarity between individual fingerprints, calculated by Dice similarity coefficient, ranged from 0.9 to 1.0. Twenty-five strains, including 23 which were isolated during two outbreaks of M. bovis-induced mastitis which occurred...

  13. Strain analysis of nonlocal viscoelastic Kelvin bar in tension

    Institute of Scientific and Technical Information of China (English)

    ZHAO Xue-chuan; LEI Yong-jun; ZHOU Jian-ping

    2008-01-01

    Based on viscoelastic Kelvin model and nonlocal relationship of strain and stress, a nonlocal constitutive relationship of viscoelasticity is obtained and the strain response of a bar in tension is studied. By transforming governing equation of the strain analysis into Volterra integration form and by choosing a symmetric exponential form of kernel function and adapting Neumann series, the closed-form solution of strain field of the bar is obtained. The creep process of the bar is presented. When time approaches infinite, the strain of bar is equal to the one of nonlocal elasticity.

  14. Occurrence and diversity of mosquitocidal strains of Bacillus thuringiensis

    Directory of Open Access Journals (Sweden)

    K. Balaraman

    2005-09-01

    Full Text Available Ever since the discovery of the first Bacillus thuringiensis strain capable of killing mosquito larvae,namely, B. thuringiensis var israelensis, there are several reports from different parts of the worldabout the occurrence of mosquitocidal strains belonging to different subspecies/serotypes numberingthirty-six. The main sources of these wild type strains are soils/sediments, plants, animal feces,sick/moribund insects and waters. The toxicity of the strains within a subspecies/serotype variedwidely. Some of the strains exhibited toxicity to mosquitoes as well as lepidopterans and dipterans(including mosquitoes as well as plant parasitic nematodes.

  15. Strain effects at solid surfaces near the melting point

    OpenAIRE

    Tartaglino, U.; Tosatti, E.

    2002-01-01

    We investigate the effects of strain on a crystal surface close to the bulk melting temperature T_m, where surface melting usually sets in. Strain lowers the bulk melting point, so that at a fixed temperature below but close to T_m the thickness of the quasi-liquid film is expected to grow with strain, irrespective of sign. In addition, a strain-induced solid surface free energy increase/decrease takes place, favoring/disfavoring surface melting depending on the sign of strain relative to sur...

  16. High temperature static strain gage development

    Science.gov (United States)

    Hulse, C. O.; Bailey, R. S.; Grant, H. P.; Anderson, W. L.; Przybyszewski, J. S.

    1991-01-01

    Final results are presented from a program to develop a thin film static strain gage for use on the blades and vanes of running, test stand gas turbine engines with goals of an 3 x 3 mm gage area and total errors of less than 10 pct. of + or - 2,000 microstrain after 50 hrs at 1250 K. Pd containing 13 Wt. pct. Cr was previously identified as a new strain sensor alloy that appeared to be potentially usable to 1250 K. Subsequently, it was discovered, in contrast with its behavior in bulk, that Pd-13Cr suffered from oxidation attack when prepared as a 4.5 micron thick thin film. Continuing problems with electrical leakage to the substrate and the inability of sputtered alumina overcoats to prevent oxidation led to the discovery that sputtered alumina contains appreciable amounts of entrapped argon. After the argon has been exsolved by heating to elevated temperatures, the alumina films undergo a linear shrinkage of about 2 pct. resulting in formation of cracks. These problems can be largely overcome by sputtering the alumina with the substrate heated to 870 K. With 2 micron thick hot sputtered alumina insulation and overcoat films, total 50 hr drifts of about 100 microstrain (2 tests) and about 500 microstrain (1 test) were observed at 1000 and 1100 K, respectively. Results of tests on complete strain gage systems on constant moment bend bars with Pd temperature compensation grids revealed that oxidation of the Pd grid was a major problem even when the grid was overcoated with a hot or cold sputtered alumina overcoat.

  17. Strain and strain rate by two-dimensional speckle tracking echocardiography in a maned wolf

    Directory of Open Access Journals (Sweden)

    Matheus M. Mantovani

    2012-12-01

    Full Text Available The measurement of cardiovascular features of wild animals is important, as is the measurement in pets, for the assessment of myocardial function and the early detection of cardiac abnormalities, which could progress to heart failure. Speckle tracking echocardiography (2D STE is a new tool that has been used in veterinary medicine, which demonstrates several advantages, such as angle independence and the possibility to provide the early diagnosis of myocardial alterations. The aim of this study was to evaluate the left myocardial function in a maned wolf by 2D STE. Thus, the longitudinal, circumferential and radial strain and strain rate were obtained, as well as, the radial and longitudinal velocity and displacement values, from the right parasternal long axis four-chamber view, the left parasternal apical four chamber view and the parasternal short axis at the level of the papillary muscles. The results of the longitudinal variables were -13.52±7.88, -1.60±1.05, 4.34±2.52 and 3.86±3.04 for strain (%, strain rate (1/s, displacement (mm and velocity (cm/s, respectively. In addition, the radial and circumferential Strain and Strain rate were 24.39±14.23, 1.86±0.95 and -13.69±6.53, -1.01±0.48, respectively. Thus, the present study provides the first data regarding the use of this tool in maned wolves, allowing a more complete quantification of myocardial function in this species.

  18. Isolation of a Bacterium Strain Degraded Agar

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    One in 58 strains of bacteria isolated from the compost showed clear colonies after a few days of growth on the plates containing medium made of only agar and water.Water suspension contained only agar (2 and 8g·L -1 ) with two controls (normal saline,LB medium) was inoculated with the bacterium BR5-1 to see whether there was an increasement of the alive bacteria concentration after 48 h of the growth.The results showed that there was a significant rising of the alive bacteria concentration in the agar susp...

  19. Genotypic Diversity of Haemophilus parasuis Field Strains

    OpenAIRE

    Olvera, A.; Calsamiglia, M.; Aragon, V. (V.)

    2006-01-01

    Haemophilus parasuis is the cause of Glässer's disease and other clinical disorders in pigs. It can also be isolated from the upper respiratory tracts of healthy pigs, and isolates can have significant differences in virulence. In this work, a partial sequence from the 60-kDa heat shock protein (Hsp60) gene was assessed as an epidemiological marker. We analyzed partial sequences of hsp60 and 16S rRNA genes from 103 strains of H. parasuis and other related species to obtain a better classifica...

  20. Strain localization along micro-boudinage

    Science.gov (United States)

    Chatziioannou, Eleftheria; Rogowitz, Anna; Grasemann, Bernhard; Habler, Gerlinde; Soukis, Konstantinos; Schneider, David

    2016-04-01

    The progressive development of boudinage strongly depends on the kinematic framework and the mechanical properties of the boudinaged layer and host rock. A common type of boudin, which can often be observed in natural examples, is the domino boudinage. This boudin type typically reflects a strong competency contrast of the interlayered rock sequences. Numerical models have shown that a relatively high amount of strain is necessary in order to develop separated boudin segments. With ongoing deformation and consequent rotation of the individual segments into the shear direction, the terminal sectors tend to experience a higher rotation rate, progressively resulting in isoclinal folding. Whereas most investigations of domino boudinage are cm- to dm-scale examples, we examined one order of magnitude smaller examples, where the deformation mechanism between the segments and the matrix could be directly investigated. The samples are from Kalymnos Island located in the southeastern Aegean Sea (Dodecanese islands-Greece). The analysed sample belongs to the upper unit of the pre-Alpidic basement, which consists of a succession of marbles, which were deformed under lower-greenschist facies conditions during the Variscan orogeny. 40Ar/39Ar geochronological dating on white micas in the adjacent upper quartz-mica schists unit yielded deformation ages between 240 and 334 Ma. The calcitic marble comprises boudinaged dolomite layers with thickness varying between 1 and 20 mm. Progressive deformation of the boudinaged layers resulted in the development of ptygmatic folds with fold axes parallel to the stretching lineation. The grain size from the host rock marbles (10 μm) decreases towards the boudinaged dolomite layer (5 μm) indicating strain localization adjacent to the dolomite layers. Furthermore, strain is localized within micro shear zones which nucleate in the necks of rotated boudin segments. Crystallographic preferred orientations (CPO) derived from electron backscatter

  1. Systems strategies for developing industrial microbial strains

    DEFF Research Database (Denmark)

    Lee, Sang Yup; Kim, Hyun Uk

    2015-01-01

    Industrial strain development requires system-wide engineering and optimization of cellular metabolism while considering industrially relevant fermentation and recovery processes. It can be conceptualized as several strategies, which may be implemented in an iterative fashion and in different ord...... achievements in recent years include microbial production of amino acids (L-valine, L-threonine, L-lysine and L-arginine), bulk chemicals (1,4-butanediol, 1,4-diaminobutane, 1,5-diaminopentane, 1,3-propanediol, butanol, isobutanol and succinic acid) and drugs (artemisinin)....

  2. Weighing of heavy vessels using strain gauges

    International Nuclear Information System (INIS)

    The effect of pressure and temperature fluctuations is greatly reduced by appropriate design and by prestressing of the lines in an apparatus for remote, continuous weighing of heavy pressurized vessels (60 bar) at high temperatures (2500C), even when these vessels are connected to other systems by means of metal lines. The weighing device is based on the application of strain gauges. The accuracy of measurement is within 0.5%. Weighing devices of this type can be applied, for example, in the process industry

  3. Transfer induced compressive strain in graphene

    DEFF Research Database (Denmark)

    Larsen, Martin Benjamin Barbour Spanget; Mackenzie, David; Caridad, Jose;

    2014-01-01

    We have used spatially resolved micro Raman spectroscopy to map the full width at half maximum (FWHM) of the graphene G-band and the 2D and G peak positions, for as-grown graphene on copper catalyst layers, for transferred CVD graphene and for micromechanically exfoliated graphene, in order...... to characterize the effects of a transfer process on graphene properties. Here we use the FWHM(G) as an indicator of the doping level of graphene, and the ratio of the shifts in the 2D and G bands as an indicator of strain. We find that the transfer process introduces an isotropic, spatially uniform, compressive...

  4. Laboratory evolution of copper tolerant yeast strains

    Directory of Open Access Journals (Sweden)

    Adamo Giusy

    2012-01-01

    Full Text Available Abstract Background Yeast strains endowed with robustness towards copper and/or enriched in intracellular Cu might find application in biotechnology processes, among others in the production of functional foods. Moreover, they can contribute to the study of human diseases related to impairments of copper metabolism. In this study, we investigated the molecular and physiological factors that confer copper tolerance to strains of baker's yeasts. Results We characterized the effects elicited in natural strains of Candida humilis and Saccharomyces cerevisiae by the exposure to copper in the culture broth. We observed that, whereas the growth of Saccharomyces cells was inhibited already at low Cu concentration, C. humilis was naturally robust and tolerated up to 1 g · L-1 CuSO4 in the medium. This resistant strain accumulated over 7 mg of Cu per gram of biomass and escaped severe oxidative stress thanks to high constitutive levels of superoxide dismutase and catalase. Both yeasts were then "evolved" to obtain hyper-resistant cells able to proliferate in high copper medium. While in S. cerevisiae the evolution of robustness towards Cu was paralleled by the increase of antioxidative enzymes, these same activities decreased in evolved hyper-resistant Candida cells. We also characterized in some detail changes in the profile of copper binding proteins, that appeared to be modified by evolution but, again, in a different way in the two yeasts. Conclusions Following evolution, both Candida and Saccharomyces cells were able to proliferate up to 2.5 g · L-1 CuSO4 and to accumulate high amounts of intracellular copper. The comparison of yeasts differing in their robustness, allowed highlighting physiological and molecular determinants of natural and acquired copper tolerance. We observed that different mechanisms contribute to confer metal tolerance: the control of copper uptake, changes in the levels of enzymes involved in oxidative stress response and

  5. Application of a fiber optic grating strain sensor for the measurement of strain under irradiation environment

    CERN Document Server

    Kaji, Y; Kita, S; Ide, H; Tsukada, T; Tsuji, H

    2002-01-01

    In the Japan Atomic Energy Research Institute (JAERI), in-pile strain measurement techniques have been developed using the Japan Materials Testing Reactor (JMTR). In order to evaluate the performance of fiber optic grating sensors under irradiation environment, heat-up and performance tests at elevated temperatures before irradiation and in-pile tests were performed in JMTR. It was determined that it is possible to measure strain under irradiation environment below 1x10 sup 2 sup 3 n m sup - sup 2 (E>1 MeV) by a fiber optic grating sensor, because in-pile temperature characteristics were in good agreement with out-of-pile test results.

  6. Investigation of strain heterogeneities by laser scanning extensometry in strain ageing materials: application to zirconium alloys

    Energy Technology Data Exchange (ETDEWEB)

    Graff, S.; Forest, S.; Strudel, J.L. [Centre des Materiaux / UMR 7633, Ecole des Mines de Paris / CNRS, BP 87, 91003 Evry (France); Dierke, H.; Neuhauser, H. [Institut fur Physik der Kondensierten Materie, 38106 Braunschweig (Germany); Prioul, C. [MSSMAT, Ecole Centrale Paris, Grande Voie des Vignes, 92295 Chatenay-Malabry (France); Bechade, J.L. [SRMA, CEA Saclay, 91191 Gif sur Yvette (France)

    2005-07-01

    Laser scanning extensometry was used to detect and characterize propagating plastic instabilities such as the Luders bands at the millimeter scale. Spatio-temporal plastic heterogeneities are due to either static or dynamic strain ageing (SSA and DSA) phenomena. Regarding zirconium alloys, different type of heterogeneities were observed: their features strongly depended on mechanical test conditions. In one case, they appeared to be non propagating but preserved along the stress-strain curve and were associated with SSA effects such as stress peaks after relaxation periods or after unloading steps with waiting times. In other case, they appeared as non propagating but were not associated with SSA effects. (authors)

  7. Molecular Characterization of China Human Rabies Vaccine Strains

    Institute of Scientific and Technical Information of China (English)

    Xiaoyan Tao; Na Han; Zhenyang Guo; Qing Tang; Simon Rayner; Guodong Liang

    2013-01-01

    To understand the molecular characteristics of China human rabies vaccine strains,we report the full-length genome of the aG strain and present a comprehensive analysis of this strain and almost all available lyssavirus genomes (58 strains) from GenBank (as of Jan 6,2011).It is generally considered that the G protein plays a predominant role in determining the pathogenicity of the virus,to this end we predicted the tertiary structure of the G protein of aG strain,CTN 181 strain and wild type strain HN 10 based on the crystal structure of Vesicular stomatitis virus (VSV) G.The predicted RABV G structure has a similar topology to VSV G and the ectodomain can be divided into 4 distinct domains DI-DIV.By mapping the characterized mutations to this structure between China vaccine strains and their close street strains,we speculate that the G303(P-H) mutations of CTN181 and HN10 causing D Ⅱ 3D change may be associated with the attenuated virulence in both strains.Specifically,the two signature mutations (G165P and G231P) in the aG strain are withinβsheets,suggesting that both sites are of structural importance.

  8. Historical Evolution of Laboratory Strains of Saccharomyces cerevisiae.

    Science.gov (United States)

    Louis, Edward J

    2016-01-01

    Budding yeast strains used in the laboratory have had a checkered past. Historically, the choice of strain for any particular experiment depended on the suitability of the strain for the topic of study (e.g., cell cycle vs. meiosis). Many laboratory strains had poor fermentation properties and were not representative of the robust strains used for domestic purposes. Most strains were related to each other, but investigators usually had only vague notions about the extent of their relationships. Isogenicity was difficult to confirm before the advent of molecular genetic techniques. However, their ease of growth and manipulation in laboratory conditions made them "the model" model organism, and they still provided a great deal of fundamental knowledge. Indeed, more than one Nobel Prize has been won using them. Most of these strains continue to be powerful tools, and isogenic derivatives of many of them-including entire collections of deletions, overexpression constructs, and tagged gene products-are now available. Furthermore, many of these strains are now sequenced, providing intimate knowledge of their relationships. Recent collections, new isolates, and the creation of genetically tractable derivatives have expanded the available strains for experiments. But even still, these laboratory strains represent a small fraction of the diversity of yeast. The continued development of new laboratory strains will broaden the potential questions that can be posed. We are now poised to take advantage of this diversity, rather than viewing it as a detriment to controlled experiments. PMID:27371602

  9. Tasmancin and lysogenic bacteriophages induced from Erwinia tasmaniensis strains.

    Science.gov (United States)

    Müller, Ina; Lurz, Rudi; Geider, Klaus

    2012-07-25

    Mitomycin C treatment of Erwinia tasmaniensis strains from Australia induced prophages and the expression of bacteriocins. The bacteriocin named tasmancin inhibited E. tasmaniensis strains from South Africa and Germany. A gene cluster with a klebicin-related operon and an immunity protein was detected on plasmid pET46 from E. tasmaniensis strain Et1/99. PCR reactions using primers directed to this region produced signals for several strains originating from Australia, but not for strains isolated in South Africa and Germany. The latter isolates lacked plasmid pET46. Bacteriophages were induced from E. tasmaniensis strains Et88 and Et14/99, both isolates from South-Eastern Australia. These phages formed plaques on several other strains from this region, as well as on E. tasmaniensis strains from South Africa and Germany. Sequencing revealed similarity of phages ϕEt88 and ϕEt14, which shared the host range on E. tasmaniensis strains. Bacteriophages and tasmancin may interfere with the viability of several related E. tasmaniensis strains in the environment of carrier strains.

  10. Strain compatibility assessment for SRB sprayable ablator MSA-1

    Science.gov (United States)

    Patterson, W. J.

    1979-01-01

    Tensile and compressive strain compatibility testing was performed on as-sprayed samples of the Shuttle Solid Rocket Booster external ablator material, MSA-1. Strain gages on the aluminum substrate were used to monitor strain. Strain compatibility was determined as the percent strain in the substrate at first visual evidence of MSA-1 failure. The 1/8-in. MSA-1, baselined for large areas of the SRB external skin, was characterized by a strain compatibility of 1.5 to 1.8 percent, which far exceeded the yield range of the metal substrate. Thicker MSA-1 applications (1.4 to 3/8 in.) were characterized by a lower level of strain compatibility, which appeared to be a manifestation of application limitations.

  11. Metabolic activities of Lactobacillus spp. strains isolated from kefir.

    Science.gov (United States)

    Yüksekdag, Zehra Nur; Beyath, Yavuz; Aslim, Belma

    2004-06-01

    A total of 21 strains of Lactobacillus species were isolated from Turkish kefir samples, in order to select the most suitable strains according to their metabolic activities including probiotic properties. As a result of the identification tests, 21 Lactobacillus isolates were identified as L. acidophilus (4%), L. helveticus (9%), L. brevis (9%), L. bulgaricus (14%), L. plantarum (14%), L. casei (19%) and L. lactis (28%). The amount of produced lactic acid, hydrogen peroxide, proteolytic activity, and acetaldehyde productions of Lactobacillus spp. were determined. Different amounts of lactic acid were produced by strains studies; however, lactic acid levels were 1.7-11.4 mg/mL. All strains produced hydrogen peroxide. L. bulgaricus Z14L strain showed no proteolytic activity, L. casei Z6L strain produced the maximum amount (0.16 mg/mL) of proteolytic activity. Acetaldehyde concentration produced in Lactobacillus strains ranged between 0.88-3.52 microg/mL.

  12. Strain-driven criticality underlies nonlinear mechanics of fibrous networks

    CERN Document Server

    Sharma, A; Rens, R; Vahabi, M; Jansen, K A; Koenderink, G H; MacKintosh, F C

    2016-01-01

    Networks with only central force interactions are floppy when their average connectivity is below an isostatic threshold. Although such networks are mechanically unstable, they can become rigid when strained. It was recently shown that the transition from floppy to rigid states as a function of simple shear strain is continuous, with hallmark signatures of criticality (Nat. Phys. 12, 584 (2016)). The nonlinear mechanical response of collagen networks was shown to be quantitatively described within the framework of such mechanical critical phenomenon. Here, we provide a more quantitative characterization of critical behavior in subisostatic networks. Using finite size scaling we demonstrate the divergence of strain fluctuations in the network at well-defined critical strain. We show that the characteristic strain corresponding to the onset of strain stiffening is distinct from but related to this critical strain in a way that depends on critical exponents. We confirm this prediction experimentally for collagen...

  13. Strain partitioning in dual-phase steels containing tempered martensite

    Energy Technology Data Exchange (ETDEWEB)

    Han, Qihang, E-mail: hanqihang@baosteel.com [Research Institute, Baoshan Iron and Steel Co., Ltd., Shanghai 201900 (China); State Key Laboratory of Development and Application Technology of Automotive Steels (BaoSteel), Shanghai 201900 (China); Institute for Frontier Materials, Deakin University, Geelong, VIC. 3217 (Australia); Asgari, Alireza; Hodgson, Peter D.; Stanford, Nicole [State Key Laboratory of Development and Application Technology of Automotive Steels (BaoSteel), Shanghai 201900 (China)

    2014-08-12

    Tempering has been used as a method to develop a range of dual phase steels with the same martensite morphology and volume fraction, but containing phases with different relative strengths. These steels were used to examine the strain partitioning between the two constituent phases experimentally through mechanical testing and numerically through finite element modelling. It was found that increasing the differential in strength between the two phases not only produces regions of high strain, but also regions of low strain. On average, a larger difference in strength between the phases increased the strain carried by the softer phase. There was no discernible preferential strain localisation to the ferrite/martensite interface, with the regions of strain localisation being determined by the morphology of the microstructure. A direct correlation between the average strain in the ferrite, and the measured ductility has been found.

  14. Mechanism of Strain Rate Effect Based on Dislocation Theory

    Institute of Scientific and Technical Information of China (English)

    QIN Kun; Gang Li-Ming; HU Shi-Sheng

    2009-01-01

    Based on dislocation theory,we investigate the mechanism of strain rate effect.Strain rate effect and dislocation motion are bridged by Orowan's relationship,and the stress dependence of dislocation velocity is considered as the dynamics relationship of dislocation motion. The mechanism of strain rate effect is then investigated qualitatively by using these two relationships although the kinematics relationship of dislocation motion is absent due to complicated styles of dislocation motion.The process of strain rate effect is interpreted and some details of strain rate effect are adequately discussed.The present analyses agree with the existing experimental results.Based on the analyses,we propose that strain rate criteria rather than stress criteria should be satisfied when a metal is fully yielded at a given strain rate.

  15. A Review: Carbon Nanotube-Based Piezoresistive Strain Sensors

    Directory of Open Access Journals (Sweden)

    Waris Obitayo

    2012-01-01

    Full Text Available The use of carbon nanotubes for piezoresistive strain sensors has acquired significant attention due to its unique electromechanical properties. In this comprehensive review paper, we discussed some important aspects of carbon nanotubes for strain sensing at both the nanoscale and macroscale. Carbon nanotubes undergo changes in their band structures when subjected to mechanical deformations. This phenomenon makes them applicable for strain sensing applications. This paper signifies the type of carbon nanotubes best suitable for piezoresistive strain sensors. The electrical resistivities of carbon nanotube thin film increase linearly with strain, making it an ideal material for a piezoresistive strain sensor. Carbon nanotube composite films, which are usually fabricated by mixing small amounts of single-walled or multiwalled carbon nanotubes with selected polymers, have shown promising characteristics of piezoresistive strain sensors. Studies also show that carbon nanotubes display a stable and predictable voltage response as a function of temperature.

  16. Uniaxial tension test on Rubber at constant true strain rate

    Directory of Open Access Journals (Sweden)

    Sourne H.L.

    2012-08-01

    Full Text Available Elastomers are widely used for damping parts in different industrial contexts because of their remarkable dissipation properties. Indeed, they can undergo severe mechanical loading conditions, i.e., high strain rates and large strains. Nevertheless, the mechanical response of these materials can vary from purely rubber-like to glassy depending on the strain rate undergone. Classically, uniaxial tension tests are made in order to find a relation between the stress and the strain in the material at various strain rates. However, even if the strain rate is searched to be constant, it is the nominal strain rate that is considered. Here we develop a test at constant true strain rate, i.e. the strain rate that is experienced by the material. In order to do such a test, the displacement imposed by the machine is an exponential function of time. This test has been performed with a high speed hydraulic machine for strain rates between 0.01/s and 100/s. A specific specimen has been designed, yielding a uniform strain field (and so a uniform stress field. Furthermore, an instrumented aluminum bar has been used to take into account dynamic effects in the measurement of the applied force. A high speed camera enables the determination of strain in the sample using point tracking technique. Using this method, the stress-strain curve of a rubber-like material during a loading-unloading cycle has been determined, up to a stretch ratio λ = 2.5. The influence of the true strain rate both on stiffness and on dissipation of the material is then discussed.

  17. A Methodology for Measuring Strain in Power Semiconductors

    Science.gov (United States)

    Avery, Seth M.

    The objective of this work is to develop a strain measurement methodology for use in power electronics during electrical operation; such that strain models can be developed and used as the basis of an active strain controller---improving the reliability of power electronics modules. This research involves developing electronic speckle pattern interferometry (ESPI) into a technology capable of measuring thermal-mechanical strain in electrically active power semiconductors. ESPI is a non-contact optical technique capable of high resolution (approx. 10 nm) surface displacement measurements. This work has developed a 3-D ESPI test stand, where simultaneous in- and out-of-plane measured components are combined to accurately determine full-field surface displacement. Two cameras are used to capture both local (interconnect level) displacements and strains, and global (device level) displacements. Methods have been developed to enable strain measurements of larger loads, while avoiding speckle decorrelation (which limits ESPI measurement of large deformations). A method of extracting strain estimates directly from unfiltered and wrapped phase maps has been developed, simplifying data analysis. Experimental noise measurements are made and used to develop optimal filtering using model-based tracking and determined strain noise characteristics. The experimental results of this work are strain measurements made on the surface of a leadframe of an electrically active IGBT. A model-based tracking technique has been developed to allow for the optimal strain solution to be extracted from noisy displacement results. Also, an experimentally validated thermal-mechanical FE strain model has been developed. The results of this work demonstrate that in situ strain measurements in power devices are feasible. Using the procedures developed in the work, strain measurements at critical locations of strain, which limit device reliability, at relevant power levels can be completed.

  18. Effects of strain and strain rate on electronic behavior of metal surfaces under bending and tension tests

    International Nuclear Information System (INIS)

    Surface electronic behavior of MEMS and NEMS can be characterized using the Kelvin probe technique by measurements of work function (WF). However, the physical mechanism responsible for such electronic behavior of a surface subjected to mechanical loading has not been completely understood. In this study, changes in WF of copper and aluminum with respect to strain and strain rate under bending and tension tests were measured using a scanning Kelvin probe. The results showed that plastic strain and strain rate can decrease WF although elastic strain may lead to complex changes in WF, which can be explained well using the electrostatic energy model on dislocation density.

  19. Two-dimensional surface strain measurement based on a variation of Yamaguchi's laser-speckle strain gauge

    Science.gov (United States)

    Barranger, John P.

    1990-01-01

    A novel optical method of measuring 2-D surface strain is proposed. Two linear strains along orthogonal axes and the shear strain between those axes is determined by a variation of Yamaguchi's laser-speckle strain gage technique. It offers the advantages of shorter data acquisition times, less stringent alignment requirements, and reduced decorrelation effects when compared to a previously implemented optical strain rosette technique. The method automatically cancels the translational and rotational components of rigid body motion while simplifying the optical system and improving the speed of response.

  20. Strain-based fatigue data for Ti-6Al-4V ELI under fully-reversed and mean strain loads.

    Science.gov (United States)

    Carrion, Patricio E; Shamsaei, Nima

    2016-06-01

    This article presents the experimental data supporting the study to obtain the mean strain/stress effects on the fatigue behavior of Ti-6Al-4V ELI. A series of strain-controlled fatigue experiments on Ti-6Al-4V ELI were performed at four strain ratios (-1, -0.5, 0, and 0.5). Two types of data are included for each specimen. These are the hysteresis stress-strain responses for the cycle in a log10 increment, and the maximum and minimum stress-strain responses for each cycle. Fatigue lives are also reported for all the experiments.

  1. Strain-based fatigue data for Ti–6Al–4V ELI under fully-reversed and mean strain loads

    Directory of Open Access Journals (Sweden)

    Patricio E. Carrion

    2016-06-01

    Full Text Available This article presents the experimental data supporting the study to obtain the mean strain/stress effects on the fatigue behavior of Ti–6Al–4V ELI. A series of strain-controlled fatigue experiments on Ti–6Al–4V ELI were performed at four strain ratios (−1, −0.5, 0, and 0.5. Two types of data are included for each specimen. These are the hysteresis stress–strain responses for the cycle in a log10 increment, and the maximum and minimum stress–strain responses for each cycle. Fatigue lives are also reported for all the experiments.

  2. Strain-based fatigue data for Ti–6Al–4V ELI under fully-reversed and mean strain loads

    Science.gov (United States)

    Carrion, Patricio E.; Shamsaei, Nima

    2016-01-01

    This article presents the experimental data supporting the study to obtain the mean strain/stress effects on the fatigue behavior of Ti–6Al–4V ELI. A series of strain-controlled fatigue experiments on Ti–6Al–4V ELI were performed at four strain ratios (−1, −0.5, 0, and 0.5). Two types of data are included for each specimen. These are the hysteresis stress–strain responses for the cycle in a log10 increment, and the maximum and minimum stress–strain responses for each cycle. Fatigue lives are also reported for all the experiments. PMID:26952022

  3. Investigation of the interface characteristics of Y2O3/GaAs under biaxial strain, triaxial strain, and non-strain conditions

    Science.gov (United States)

    Shi, Li-Bin; Liu, Xu-Yang; Dong, Hai-Kuan

    2016-09-01

    We investigate the interface behaviors of Y2O3/GaAs under biaxial strain, triaxial strain, and non-strain conditions. This study is performed by first principles calculations based on density functional theory (DFT). First of all, the biaxial strain is realized by changing the lattice constants in ab plane. Averaged electrostatic potential (AEP) is aligned by establishing Y2O3 and GaAs (110) surfaces. The band offsets of Y2O3/GaAs interface under biaxial strain are investigated by generalized gradient approximation and Heyd-Scuseria-Ernzerhof (HSE) functionals. The interface under biaxial strain is suitable for the design of metal oxide semiconductor (MOS) devices because the valence band offsets (VBO) and conduction band offsets (CBO) are larger than 1 eV. Second, the triaxial strain is applied to Y2O3/GaAs interface by synchronously changing the lattice constants in a, b, and c axis. The band gaps of Y2O3 and GaAs under triaxial strain are investigated by HSE functional. We compare the VBO and CBO under triaxial strain with those under biaxial strain. Third, in the absence of lattice strain, the formation energies, charge state switching levels, and migration barriers of native defects in Y2O3 are assessed. We investigate how they will affect the MOS device performance. It is found that VO+2 and Oi-2 play a very dangerous role in MOS devices. Finally, a direct tunneling leakage current model is established. The model is used to analyze current and voltage characteristics of the metal/Y2O3/GaAs.

  4. Valsalva maneuver: shortest optimal expiratory strain duration

    Directory of Open Access Journals (Sweden)

    Ramesh K. Khurana, Md

    2011-07-01

    Full Text Available Purpose : To quantitate the level of difficulty and determine consistency of hemodynamic responses with various expiratory strain (ES durations. Methods : Thirty-four healthy subjects performed the Valsalva maneuver (VM with an ES duration of 10, 12, and 15 seconds in random order. Level of difficulty after each trial was rated 1 to 10, with 10 being the most difficult. Blood pressure and heart rate (HR were recorded continuously and non-invasively. Parameters studied were Valsalva ratio (VR, early phase II (IIE, late phase II (IIL, tachycardia latency (TL, bradycardia latency (BL, and overshoot latency (OV-L. Consistency of responses was calculated. Results : Difficulty increased significantly with increased ES duration: 5.1±0.1 (mean±SEM at 10 seconds, 5.9±0.1 at 12 seconds, and 6.8±0.1 at 15 seconds (p<0.001. Phase IIE, TL, BL, OV-L, and VR response did not differ statistically with increasing ES durations, and there were no differences in variability. Phase IIL response increased significantly with increasing ES duration. Phase IIL was poorly delineated in 14 of 102 trials with 10 seconds ES duration. Conclusions : ES duration of 10 seconds created a low level of difficulty in healthy individuals. This strain duration produced consistent hemodynamic response for all parameters tested except IIL phase. The absence of IIL phase with 10 seconds ES should not be interpreted as an indicator of sympathetic vasoconstrictor failure.

  5. Substrate-induced strain in carbon nanodisks

    International Nuclear Information System (INIS)

    Graphitic nanodisks of typically 20–50 nm in thickness, produced by the so-called Kvaerner Carbon Black and Hydrogen Process were dispersed on gold substrate and investigated by atomic force microscopy (AFM), field emission scanning electron microscopy (FE-SEM), and confocal Raman spectroscopy. The roughness of the gold surface was drastically changed by annealing at 400 °C. AFM measurements show that this change in the surface roughness induces changes also in the topography of the nanodisks, as they closely follow the corrugation of the gold substrate. This leads to strained nanodisks, which is confirmed also by confocal Raman microscopy. We found that the FE-SEM contrast obtained from the disks depends on the working distance used during the image acquisition by In-lens detection, a phenomenon which we explain by the decrease in the amount of electrons reaching the detector due to diffraction. This process may affect the image contrast in the case of other layered materials, like hexagonal boron nitride, and other planar hybrid nanostructures, too. - Highlights: • Bending of carbon nanodisks is induced by the roughness of the gold substrate. • Confocal Raman microscopy shows a compressive strain induced in the nanodisks. • The electron microscopy contrast of nanodisks depends on the working distance

  6. Systems strategies for developing industrial microbial strains.

    Science.gov (United States)

    Lee, Sang Yup; Kim, Hyun Uk

    2015-10-01

    Industrial strain development requires system-wide engineering and optimization of cellular metabolism while considering industrially relevant fermentation and recovery processes. It can be conceptualized as several strategies, which may be implemented in an iterative fashion and in different orders. The key challenges have been the time-, cost- and labor-intensive processes of strain development owing to the difficulties in understanding complex interactions among the metabolic, gene regulatory and signaling networks at the cell level, which are collectively represented as overall system performance under industrial fermentation conditions. These challenges can be overcome by taking systems approaches through the use of state-of-the-art tools of systems biology, synthetic biology and evolutionary engineering in the context of industrial bioprocess. Major systems metabolic engineering achievements in recent years include microbial production of amino acids (L-valine, L-threonine, L-lysine and L-arginine), bulk chemicals (1,4-butanediol, 1,4-diaminobutane, 1,5-diaminopentane, 1,3-propanediol, butanol, isobutanol and succinic acid) and drugs (artemisinin). PMID:26448090

  7. Physics of strained quantum well lasers

    CERN Document Server

    Loehr, John P

    1998-01-01

    When this publisher offered me the opportunity to \\\\Tite a book, some six years ago, I did not hesitate to say yes. I had just spent the last four years of graduate school struggling to understand the physics of strained quantum well lasers, and it seemed to me the whole experience was much more difficult that it should have been. For although many of the results I needed were easy to locate, the underlying physical premises and intervening steps were not. If only I had a book providing the derivations, I could have absorbed them and gone on my way. Such a book lies before you. It provides a unified and self-contained descrip­ tion of the essential physics of strained quantum well lasers, starting from first principles whenever feasible. The presentation I have chosen requires only the standard introductory background in quantum mechanics, solid state physics, and electromagnetics expected of entering graduate students in physics or elec­ trical engineering. A single undergraduate course in each of these su...

  8. Subsurface micro-lattice strain mapping

    Science.gov (United States)

    Ananthanarayanan, T. S.; Rosemeier, R. G.; Mayo, W. E.; Becla, P.

    Defect morphology and distribution up to depths of 20 microns have been shown to be critical to device performance in microelectronic applications. A unique and novel X-ray diffraction method called DARC (digital automated rocking curve) topography has been effectively utilized to map crystalline microlattice strains in various substrates and epitaxial films. The spatial resolution of this technique is in the the order of 100 microns and the analysis time for a 2 sq cm area is about 10 secs. DARC topography incorporates state-of-the-art one-dimensional and two-dimensional X-ray detectors to modify a conventional double crystal diffractometer to obtain color X-ray rocking curve topographs. This technique, being nondestructive and nonintrusive in nature, is an invaluable tool in materials' quality control for IR detector fabrication. The DARC topographs clearly delineate areas of micro-plastic strain inhomogeniety. Materials analyzed using this technique include HgMnTe, HgCdTe, BaF2, PbSe, PbS both substrates and epitaxial films.

  9. A magnetically actuated cellular strain assessment tool for quantitative analysis of strain induced cellular reorientation and actin alignment

    Science.gov (United States)

    Khademolhosseini, F.; Liu, C.-C.; Lim, C. J.; Chiao, M.

    2016-08-01

    Commercially available cell strain tools, such as pneumatically actuated elastomer substrates, require special culture plates, pumps, and incubator setups. In this work, we present a magnetically actuated cellular strain assessment tool (MACSAT) that can be implemented using off-the-shelf components and conventional incubators. We determine the strain field on the MACSAT elastomer substrate using numerical models and experimental measurements and show that a specific region of the elastomer substrate undergoes a quasi-uniaxial 2D stretch, and that cells confined to this region of the MACSAT elastomer substrate undergo tensile, compressive, or zero axial strain depending on their angle of orientation. Using the MACSAT to apply cyclic strain on endothelial cells, we demonstrate that actin filaments within the cells reorient away from the stretching direction, towards the directions of minimum axial strain. We show that the final actin orientation angles in strained cells are spread over a region of compressive axial strain, confirming previous findings on the existence of a varied pre-tension in the actin filaments of the cytoskeleton. We also demonstrate that strained cells exhibit distinctly different values of actin alignment coherency compared to unstrained cells and therefore propose that this parameter, i.e., the coherency of actin alignment, can be used as a new readout to determine the occurrence/extent of actin alignment in cell strain experiments. The tools and methods demonstrated in this study are simple and accessible and can be easily replicated by other researchers to study the strain response of other adherent cells.

  10. Genome Sequence of Campylobacter jejuni strain 327, a strain isolated from a turkey slaughterhouse

    DEFF Research Database (Denmark)

    Takamiya, Monica; Özen, Asli Ismihan; Rasmussen, Morten;

    2011-01-01

    , catalase positive bacterium obtains energy from the metabolism of amino acids and Krebs cycle intermediates. Strain 327 was isolated from a turkey slaughter production line and is considered environmentally sensitive to food processing (cold, heat, drying) and storage conditions. The 327 whole genome...

  11. Direct measurement of intrinsic critical strain and internal strain in barrier films

    NARCIS (Netherlands)

    Vellinga, W. P.; De Hosson, J. Th M.; Bouten, P. C. P.

    2011-01-01

    Resistance measurements during uniaxial tensile deformation of very thin (10 nm) conducting oxide films deposited on 150 nm SiN films on polyethylene naphthalate are discussed. It is first shown that certain characteristics of resistance versus strain curves are representative for the fracture behav

  12. Measurement of strain and strain rate in embryonic chick heart using spectral domain optical coherence tomography

    Science.gov (United States)

    Dou, Shidan; Suo, Yanyan; Liang, Chengbo; Wang, Yi; Zhao, Yuqian; Liu, Jian; Xu, Tao; Wang, Ruikang; Ma, Zhenhe

    2016-03-01

    It is important to measure embryonic heart myocardial wall strain and strain rate for understanding the mechanisms of embryonic heart development. Optical coherence tomography (OCT) can provide depth resolved images with high spatial and temporal resolution, which makes it have the potential to reveal the complex myocardial activity in the early stage embryonic heart. We develop a novel method to measure strain in embryonic chick heart based on spectral domain OCT images and subsequent image processing. We perform 4D(x,y,z,t) scanning on the outflow tract (OFT) of chick embryonic hearts in HH18 stage (~3 days of incubation). Only one image sequence acquired at the special position is selected based on the Doppler blood flow information where the probe beam penetrates through the OFT perpendicularly. For each image of the selected sequence, the cross-section of the myocardial wall can be approximated as an annulus. The OFT is segmented with a semi-automatic boundary detection algorithm, thus the area and mean circumference of the annular myocardial wall can be achieved. The myocardial wall thickness was calculated using the area divided by the mean circumference, and then the strain was obtained. The results demonstrate that OCT can be a useful tool to describe the biomechanical characteristics of the embryonic heart.

  13. Silicon strain gages bonded on stainless steel using glass frit for strain sensor applications

    International Nuclear Information System (INIS)

    In this paper, a steel pressure sensor using strain gages bonded on a 17–4 PH stainless steel (SS) diaphragm based on glass frit technology is proposed. The strain gages with uniform resistance are obtained by growing an epi-silicon layer on a single crystal silicon wafer using epitaxial deposition technique. The inorganic glass frits are used as the bonding material between the strain gages and the 17–4 PH SS diaphragm. Our results show that the output performances of sensors at a high temperature of 125 °C are almost equal those at room temperature, which indicates that the glass frit bonding is a good method and may lead to a significant advance in the high temperature applicability of silicon strain gage sensors. Finally, the microstructure of the cured organic adhesive and the fired glass frit are compared. It may be concluded that the defects of the cured organic adhesive deteriorate the hysteresis and repeatability errors of the sensors. (paper)

  14. Silicon strain gages bonded on stainless steel using glass frit for strain sensor applications

    Science.gov (United States)

    Zhang, Zongyang; Cheng, Xingguo; Leng, Yi; Cao, Gang; Liu, Sheng

    2014-05-01

    In this paper, a steel pressure sensor using strain gages bonded on a 17-4 PH stainless steel (SS) diaphragm based on glass frit technology is proposed. The strain gages with uniform resistance are obtained by growing an epi-silicon layer on a single crystal silicon wafer using epitaxial deposition technique. The inorganic glass frits are used as the bonding material between the strain gages and the 17-4 PH SS diaphragm. Our results show that the output performances of sensors at a high temperature of 125 °C are almost equal those at room temperature, which indicates that the glass frit bonding is a good method and may lead to a significant advance in the high temperature applicability of silicon strain gage sensors. Finally, the microstructure of the cured organic adhesive and the fired glass frit are compared. It may be concluded that the defects of the cured organic adhesive deteriorate the hysteresis and repeatability errors of the sensors.

  15. Strain bidimensional na cardiopatia de Takotsubo Two-dimensional strain in Takotsubo cardiomyopathy

    Directory of Open Access Journals (Sweden)

    Carlos Bellini G. Gomes

    2010-08-01

    Full Text Available Este relato apresenta o seguimento tardio de um caso de cardiomiopatia de Takotsubo com boa evolução clínica e melhora da função sistólica global ventricular esquerda. Contudo, observou-se persistência de significativa disfunção sistólica regional longitudinal que foi avaliada por meio de nova técnica ecocardiográfica (speckle tracking, com as medidas do strain (S e strain rate (SR correspondentes. Ressaltamos a importância desse novo método para o acompanhamento dessa cardiopatia, pois permite identificar os pacientes que persistem com disfunção sistólica e que possivelmente serão beneficiados com a manutenção da terapêutica clínica.This report presents the late follow-up of a case of Takotsubo cardiomyopathy with good clinical outcome and improved left ventricular global systolic function. However, there was persistence of significant regional longitudinal systolic dysfunction evaluated using a new echocardiographic technique (speckle tracking, with corresponding measures of strain (S and strain rate (SR. We emphasize the importance of this new method to monitoring this cardiomyopathy, since it identifies patients with persistent systolic dysfunction who will possibly benefit from maintenance of clinical therapy

  16. Screening Three Strains of Pseudomonas aeruginosa: Prediction of Biosurfactant-Producer Strain

    Directory of Open Access Journals (Sweden)

    Gholamreza Dehghan-Noudeh

    2009-01-01

    Full Text Available Problem statement: The chemical surfactants have some disadvantages; especially, toxicity and no biodegradability. Approach: Biosurfactants were the structurally diverse group of surface-active molecules synthesize by micro-organisms. The microbial surfactants were interesting, because of the biodegradable and have many applications in industry, agriculture, medicine. Results: In the present study, the production of biosurfactant by three strains of Pseudomonas aeruginosa (PTCC 1074, 1310 and 1430 was investigated. The hemolytic and foam forming activity of different strains were studied and consequently, P. aeruginosa PTCC 1074 was selected as the suitable strain. P. aeruginosa PTCC 1074 was grown in the nutrient broth medium and biosurfactant production was evaluated every 24 h by emulsification index and surface tension for the best of production time. After that, in order to get maximum production of biosurfactant, the selected strain was grown with different additives in nutrient broth and the best culture medium was found. The biosurfactant was isolated from the supernatant and its amphipathic structure was confirmed by chemical methods. Conclusion: Biosurfactant produced by Pseudomonas aeruginosa PTCC 1074 would be considered as a suitable surfactant in industries due to its low toxicity.

  17. Strain rate dependency of oceanic intraplate earthquake b-values at extremely low strain rates

    Science.gov (United States)

    Sasajima, Ryohei; Ito, Takeo

    2016-06-01

    We discovered a clear positive dependence of oceanic intraplate earthquake (OCEQ) b-values on the age of the oceanic lithosphere. OCEQ b-values in the youngest (20 Ma) oceanic lithosphere exceed 1.5, which is significantly higher than the average worldwide earthquake b-value (around 1.0). On the other hand, the b-value of intraplate earthquakes in the Ninety East-Sumatra orogen, where oceanic lithosphere has an anomalously higher strain rate compared with normal oceanic lithosphere, is 0.93, which is significantly lower than the OCEQ b-value (about 1.9) with the same age (50-110 Ma). Thus, the variation in b-values relates to the strain rate of the oceanic lithosphere and is not caused by a difference in thermal structure. We revealed a negative strain rate dependency of the b-value at extremely low strain rates (1.5) in oceanic lithosphere >20 Ma old imply that future improvement in seismic observation will capture many smaller magnitude OCEQs, which will provide valuable information on the evolution of the oceanic lithosphere and the driving mechanism of plate tectonics.

  18. Metabolomic study of Chilean biomining bacteria Acidithiobacillus ferrooxidans strain Wenelen and Acidithiobacillus thiooxidans strain Licanantay.

    Science.gov (United States)

    Martínez, Patricio; Gálvez, Sebastián; Ohtsuka, Norimasa; Budinich, Marko; Cortés, María Paz; Serpell, Cristián; Nakahigashi, Kenji; Hirayama, Akiyoshi; Tomita, Masaru; Soga, Tomoyoshi; Martínez, Servet; Maass, Alejandro; Parada, Pilar

    2013-02-01

    In this study, we present the first metabolic profiles for two bioleaching bacteria using capillary electrophoresis coupled with mass spectrometry. The bacteria, Acidithiobacillus ferrooxidans strain Wenelen (DSM 16786) and Acidithiobacillus thiooxidans strain Licanantay (DSM 17318), were sampled at different growth phases and on different substrates: the former was grown with iron and sulfur, and the latter with sulfur and chalcopyrite. Metabolic profiles were scored from planktonic and sessile states. Spermidine was detected in intra- and extracellular samples for both strains, suggesting it has an important role in biofilm formation in the presence of solid substrate. The canonical pathway for spermidine synthesis seems absent as its upstream precursor, putrescine, was not present in samples. Glutathione, a catalytic activator of elemental sulfur, was identified as one of the most abundant metabolites in the intracellular space in A. thiooxidans strain Licanantay, confirming its participation in the sulfur oxidation pathway. Amino acid profiles varied according to the growth conditions and bioleaching species. Glutamic and aspartic acid were highly abundant in intra- and extracellular extracts. Both are constituents of the extracellular matrix, and have a probable role in cell detoxification. This novel metabolomic information validates previous knowledge from in silico metabolic reconstructions based on genomic sequences, and reveals important biomining functions such as biofilm formation, energy management and stress responses. ELECTRONIC SUPPLEMENTARY MATERIAL: The online version of this article (doi:10.1007/s11306-012-0443-3) contains supplementary material, which is available to authorized users.

  19. Impact of strain engineering on nanoscale strained InGaAs MOSFET devices.

    Science.gov (United States)

    Lee, Chang-Chun; Chang, Shu-Tong; Sun, P-H; Huang, C-X

    2011-07-01

    The strain distributions in the In(0.53)Ga(0.47)As channel regions of the In(0.4)Ga(0.6)As source/drain (S/D) with various lengths and widths were studied via 3D process simulations. The resulting mobility improvement was analyzed. The tensile strain along the transport direction was found to dominate the mobility improvement. The strain along the vertical direction perpendicular to the gate oxide was found to affect the mobility the least, while the strain along the width direction was slightly degraded. The impact of the channel width and length on the performance improvement, such as on the mobility gain, was analyzed via TCAD simulations. The novelty of this paper stems from its study of the impact of the channel width and length on the performance of InGaAs NMOSFETs, such as on their mobility gain, and from its exploration of physical insights for scaling the future III-V MOS devices. PMID:22121581

  20. Application of fiber optic grating strain sensor for measurement of strain under irradiation environment

    Energy Technology Data Exchange (ETDEWEB)

    Kaji, Y.; Matsui, Y.; Kita, S.; Ide, H.; Tsukada, T.; Tsuji, H. [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan)

    2001-07-01

    In Japan Atomic Energy Research Institute (JAERI), in-pile strain measurement techniques have been developed using Japan Materials Testing Reactor (JMTR). In order to evaluate the performance of fiber optic grating sensor under irradiation environment, heat-up and performance tests at elevated temperature before irradiation and in-pile tests were performed in JMTR. (author)

  1. Finite Element Modeling of the Behavior of Armor Materials Under High Strain Rates and Large Strains

    Science.gov (United States)

    Polyzois, Ioannis

    For years high strength steels and alloys have been widely used by the military for making armor plates. Advances in technology have led to the development of materials with improved resistance to penetration and deformation. Until recently, the behavior of these materials under high strain rates and large strains has been primarily based on laboratory testing using the Split Hopkinson Pressure Bar apparatus. With the advent of sophisticated computer programs, computer modeling and finite element simulations are being developed to predict the deformation behavior of these metals for a variety of conditions similar to those experienced during combat. In the present investigation, a modified direct impact Split Hopkinson Pressure Bar apparatus was modeled using the finite element software ABAQUS 6.8 for the purpose of simulating high strain rate compression of specimens of three armor materials: maraging steel 300, high hardness armor (HHA), and aluminum alloy 5083. These armor materials, provided by the Canadian Department of National Defence, were tested at the University of Manitoba by others. In this study, the empirical Johnson-Cook visco-plastic and damage models were used to simulate the deformation behavior obtained experimentally. A series of stress-time plots at various projectile impact momenta were produced and verified by comparison with experimental data. The impact momentum parameter was chosen rather than projectile velocity to normalize the initial conditions for each simulation. Phenomena such as the formation of adiabatic shear bands caused by deformation at high strains and strain rates were investigated through simulations. It was found that the Johnson-Cook model can accurately simulate the behavior of body-centered cubic (BCC) metals such as steels. The maximum shear stress was calculated for each simulation at various impact momenta. The finite element model showed that shear failure first occurred in the center of the cylindrical specimen and

  2. High strain rate loading of polymeric foams and solid plastics

    Science.gov (United States)

    Dick, Richard D.; Chang, Peter C.; Fourney, William L.

    2000-04-01

    The split-Hopkinson pressure bar (SHPB) provided a technique to determine the high strain rate response for low density foams and solid ABS and polypropylene plastics. These materials are used in the interior safety panels of automobiles and crash test dummies. Because the foams have a very low impedance, polycarbonate bars were used to acquire the strain rate data in the 100 to 1600 l/s range. An aluminum SPHB setup was used to obtain the solid plastics data which covered strain rates of 1000 to 4000 l/s. The curves for peak strain rate versus peak stress for the foams over the test range studied indicates only a slight strain rate dependence. Peak strain rate versus peak stress curves for polypropylene shows a strain rate dependence up to about 1500 l/s. At that rate the solid poly propylene indicates no strain rate dependence. The ABS plastics are strain rate dependent up to 3500 l/s and then are independent at larger strain rates.

  3. Step width alters iliotibial band strain during running.

    Science.gov (United States)

    Meardon, Stacey A; Campbell, Samuel; Derrick, Timothy R

    2012-11-01

    This study assessed the effect of step width during running on factors related to iliotibial band (ITB) syndrome. Three-dimensional (3D) kinematics and kinetics were recorded from 15 healthy recreational runners during overground running under various step width conditions (preferred and at least +/- 5% of their leg length). Strain and strain rate were estimated from a musculoskeletal model of the lower extremity. Greater ITB strain and strain rate were found in the narrower step width condition (p < 0.001, p = 0.040). ITB strain was significantly (p < 0.001) greater in the narrow condition than the preferred and wide conditions and it was greater in the preferred condition than the wide condition. ITB strain rate was significantly greater in the narrow condition than the wide condition (p = 0.020). Polynomial contrasts revealed a linear increase in both ITB strain and strain rate with decreasing step width. We conclude that relatively small decreases in step width can substantially increase ITB strain as well as strain rates. Increasing step width during running, especially in persons whose running style is characterized by a narrow step width, may be beneficial in the treatment and prevention of running-related ITB syndrome.

  4. Antimicrobial drug susceptibility of Neisseria meningitidis strains isolated from carriers

    Directory of Open Access Journals (Sweden)

    Dayamí García

    2000-06-01

    Full Text Available When it is necessary to determine the susceptibility of Neisseria meningitidis (Nm strains to antimicrobial drugs, it is important to consider that it should be analyzed in a double context. One of them related to the use of drugs in a specific medical treatment; and the other; to chemoprophylatic drugs, both with the same purpose: the accurate selection of the “in vivo” antimicrobial agent. This requires the study of the sensitivity and resistance of strains isolated in both carriers and patients. With the aim of further studying the behavior of the strains that currently circulate in Cuba, an antimicrobial drug susceptibility study was conducted in 90 strains isolated from carriers during the first half of 1998. The agar dilution method was used to determine the minimum inhibitory concentrations (MICs to: penicillin, ampicillin, rifampin, sulfadiazine, chloramphenicol, ciprofloxacin, ceftriaxone, cefotaxime. The study of the three latter drugs was done for the first time in our country. The search for β- lactamase-producer strains was also performed. There was a predominance of penicillin sensitive strains (82,2% with an intermediate sensitivity to ampicillin (57,8%, while 70% of the strains were sensitive to sulfadiazine. Regarding the rest of the antimicrobial drugs, 100% of the strains were sensitive. The paper shows the MICs for each drug as well as the phenotypic characteristics of the strains with the penicillin and sulfadiazine sensitivity and resistance patterns. No β-lactamase-producer strains were found.

  5. Identification of Iron-reducing Thermus strains as Thermus scotoductus

    Energy Technology Data Exchange (ETDEWEB)

    Balkwill, David L.; Kieft, T L.; Tsukuda, Toyoko; Kostandarithes, Heather M.; Onstott, T C.; Macnaughton, S.; Bownas, J.; Fredrickson, Jim K.

    2004-02-01

    Thermus strain SA-01, previously isolated from a deep (3.2) South African gold mine, is closely related to Thermus strains NMX2 A.1 and VI-7 (previously isolated from thermal springs in New Mexico USA and Portugal, respectively). Thermus strains SA-01 and NMX2 A.1 have also been shown previously to grow using nitrate, Fe(III), , Mn(IV) or So as terminal electron acceptors and to be capable of reducing Cr(VI), U(VI), Co(III), and the quinine-containing compound anthraquinone-2,6-disulfonate. The objectives of this study were to determine the phylogenetic positions of the three known metal-reducing Thermus strains and to determine the phylogenetic significance of metal reduction within the genus Thermus. Phylogenetic analyses of 16S rDNA sequences, BOX PCR genomic fingerprinting, and DNA-DNA reassociation analyses indicated that these strains belong to the previously described genospecies T. scotoductus. The morphologies and lipid fatty acid profiles of these metal-reducing strains are consistent with their identification as T. scotoductus; however, the T. scotoductus strains tested in this study evinced a wide intraspecies variability in some other phenotypic traits, e.g., carbon substrate utilization and pigmentation. Iron reduction occurred in all strains of T. scotoductus tested except the mixotrophic, sulfur-oxidizing strain IT-7254. Thermus strains belonging to other species did not reduce Fe(III) to Fe(II) or reduced it only poorly.

  6. Nutritional values of different strains of mushrooms (Agaricus bisporus

    Directory of Open Access Journals (Sweden)

    Józef Bąkowski

    2013-12-01

    Full Text Available The nutritional values and chemical composition of different strains of the mushroom (Agaricus bisporus were studied. The study covered four strains cultivated in Poland: OCNOS-1, Somycel-11 , Somycel-92, and Somycel-653. The samples were analyzed for dry matter, vitamin C, nitrates, nitrites, total nitrogen and crude protein (N × 4.38, amino acid composition, soluble carbohydrates composition, and minerals content. Besides, whiteness values were determined by Hunter's method. All determinations were made on two of fruit-bodies of two sizes: 25-40 mm in pileus diameter (small and 40-50 mm in pileus diameter (large. A significantly higher dry matter content was found in strain 1 in comparison with strain 92. The lowest value of total nitrogen was detected for strain 92 and the highest for strain 653. From among the four analyzed strains, strain 92 contained the highest amount of essential amino acids. Trehalose content was significantly lower in strain 11 in comparison with other strains both in small and large fruit-body.

  7. The complete genome of Enterovirus 71 China strain

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Five overlapping clones covering the full genome of Enterovirus71 China strain SHZH98 were obtained and then the sequences were determined by the chain termination method. It showed that the full length of EV71 SHZH98 genome (not including Poly A tail) is 7408 bp. There are some diversities on the lengths and sequences of 5′ UTR and 3′ UTR between SHZH98 and the other EV71 strains. In P1 capsid region, which is closely associated with viral immunogenicity, EV71 strain SHZH98 shares the highest homology with Taiwan strains; but in P2 and P3 non-structural gene regions there are higher identities with Coxsakievirus A16 and EV71 strains MS, BrCr than with Taiwan strains. Phylogenetic tree constructed by structural gene region indicates that China strain SHZH98 has a closer relationship with Taiwan strains, however, in the non-coding region it has a closer relationship with Coxsakievirus A16, EV71 strains MS and BrCr. EV71 China strain was analyzed at the molecular level. The results will contribute to the basic study on enteroviruses and the EV71 prevention in China.

  8. Relatedness of Thermomyces lanuginosus strains producing a thermostable xylanase.

    Science.gov (United States)

    Singh, S; Reddy, P; Haarhoff, J; Biely, P; Janse, B; Pillay, B; Pillay, D; Prior, B A

    2000-08-25

    Properties of an endo-beta-xylanase produced by a locally isolated Thermomyces lanuginosus strain SSBP was compared to seven other T. lanuginosus strains isolated from different geographical regions. Strain SSBP produced the highest xylanase activity of 59600 nkat ml(-1) when cultivated on corn cobs (maize) medium, whereas the seven other strains produced xylanase activities ranging from 6000 to 32000 nkat ml(-1). No cellulase activity was produced by the strains. Despite the variability in the production of xylanase, little difference in the other characteristics of the strains could be found. The optimal temperature and pH for xylanase production by the strains was either 40 or 50 degrees C and between pH 6 and 7, respectively. Optimal xylanase activity of the strains was observed at 70 degrees C and at pH 6 or 6.5. Culture supernatant analysis by SDS-PAGE and isoelectric focusing PAGE of all strains revealed the presence of a single 24.7 kDa and pI 3.9 xylanase. Phylogenetic analysis by PCR amplification and sequencing of the internal transcribed spacer of nuclear rRNA repeat units and 5.8S rDNA revealed no strain diversity. However, random amplified polymorphic DNA analysis pointed to greater diversity and with one primer (5'-GCCCGACGCG-3'), a relationship was established between xylanase levels and the RAPD pattern. PMID:10989171

  9. Cryopreservation of basidiomycete strains using perlite.

    Science.gov (United States)

    Homolka, L; Lisá, L; Eichlerová, I; Nerud, F

    2001-12-01

    A new alternative method using perlite as a particulate solid carrier in the growth medium with a cryoprotectant was successfully tested for cryopreservation of several basidiomycete species from different genera (Armillaria, Pleurotus, Pluteus, Polyporus) which failed to survive or retain their properties in cryopreservation procedures routinely used in our laboratory. Frozen basidiomycete strains were kept in cryovials submerged in liquid nitrogen and were either immediately after the freezing process or after a 6-month storage thawed and checked for viability, purity and changes in growth, morphology and biochemical characteristics. All cultures survived the cryopreservation procedure and no negative effects of cryopreservation by this method have been observed after 6 months of storage in liquid nitrogen.

  10. Antimicrobial susceptibility pattern of Helicobacter suis strains.

    Science.gov (United States)

    Vermoote, Miet; Pasmans, Frank; Flahou, Bram; Van Deun, Kim; Ducatelle, Richard; Haesebrouck, Freddy

    2011-12-15

    Helicobacter suis is a very fastidious porcine gastric pathogen, which is also considered to be of zoonotic importance. In vitro antimicrobial susceptibility cannot be determined using standard assays, as this agent only grows in a biphasic medium with an acidic pH. Therefore, a combined agar and broth dilution method was used to analyse the activity of nine antimicrobial agents against nine H. suis isolates. After 48 h microaerobic incubation, minimal inhibitory concentrations (MICs) were determined by software-assisted calculation of bacterial growth. Only for enrofloxacin a bimodal distribution of MICs was demonstrated, indicating acquired resistance in one strain, which showed an AGT→AGG (Ser→Arg) substitution at codon 99 of gyrA. In conclusion, the assay developed here is suitable for determination of the antimicrobial susceptibility of H. suis isolates, although activity of acid sensitive antimicrobial agents may be higher than predicted from MIC endpoints. PMID:21733643

  11. LASER SPECTRAL ANALYSIS OF STRAIN MEASUREM ENT

    Institute of Scientific and Technical Information of China (English)

    姜耀东; 陈至达

    1994-01-01

    Modern optical theory has shown that the far field or Fraunhofer diffraction equipment is identical to the Fourier spectral analyzer. In the Fourier spectral analyzer the Fourier spectra or the Fraunhofer diffraction pattern of a graph is formed on the back foeal plane when a laser beam is directed on the graph lying on the front focal plane; the Fourier spectra of the graph is also subjected to change during the deformation of the graph. Through analyzing the change of Fourier spectra the deformation of the graph can be obtained. A few years ago, based on the above principles the authors proposed a new technique of strain measurement by laser spectral analysis. Demonstration and discussion will be made in detail in this paper.

  12. Soliton trap in strained graphene nanoribbons

    International Nuclear Information System (INIS)

    The wavefunction of a massless fermion consists of two chiralities, left handed and right handed, which are eigenstates of the chiral operator. The theory of weak interactions of elementary particle physics is not symmetric about the two chiralities, and such a symmetry-breaking theory is referred to as a chiral gauge theory. The chiral gauge theory can be applied to the massless Dirac particles of graphene. In this paper, we show within the framework of the chiral gauge theory for graphene that a topological soliton exists near the boundary of a graphene nanoribbon in the presence of a strain. This soliton is a zero-energy state connecting two chiralities and is an elementary excitation transporting a pseudo-spin. The soliton should be observable by means of a scanning tunneling microscopy experiment.

  13. Easy storage strategies for Sporothrix spp. strains.

    Science.gov (United States)

    Brilhante, Raimunda Sâmia Nogueira; Silva, Natalya Fechine; Lima, Rita Amanda Chaves de; Caetano, Érica Pacheco; Alencar, Lucas Pereira de; Castelo-Branco, Débora de Souza Collares Maia; Moreira, José Luciano Bezerra; Bandeira, Silviane Praciano; Camargo, Zoilo Pires de; Rodrigues, Anderson Messias; Bandeira, Tereza de Jesus Pinheiro Gomes; Monteiro, André Jalles; Cordeiro, Rossana de Aguiar; Sidrim, José Júlio Costa; Rocha, Marcos Fábio Gadelha

    2015-04-01

    The present study evaluated the maintenance of Sporothrix spp. (6 Sporothrix brasiliensis; 6 S. schenckii; 5 S. mexicana, and 3 S. globosa) in saline at 4°C, and in 10% glycerol plus either 10% lactose or 10% sucrose, at -20°C and -80°C. Viability was assessed after 3, 6, and 9 months of storage, through the recovery of strains on potato dextrose agar and analysis of macro- and micromorphological features. Conidium quantification was performed before and after storage, at 3, 6 and 9 months. 100% viability was observed, regardless of storage conditions or time period. Storage at 4°C and at -20°C did not alter the number of conidia, but lower conidium counts were observed at -80°C. This study shows that the combination of glycerol with lactose or sucrose is effective to maintain Sporothrix spp. at freezing temperatures.

  14. De novo generation of prion strains.

    Science.gov (United States)

    Colby, David W; Prusiner, Stanley B

    2011-11-01

    Prions are self-replicating proteins that can cause neurodegenerative disorders such as bovine spongiform encephalopathy (also known as mad cow disease). Aberrant conformations of prion proteins accumulate in the central nervous system, causing spongiform changes in the brain and eventually death. Since the inception of the prion hypothesis - which states that misfolded proteins are the infectious agents that cause these diseases - researchers have sought to generate infectious proteins from defined components in the laboratory with varying degrees of success. Here, we discuss several recent studies that have produced an array of novel prion strains in vitro that exhibit increasingly high titres of infectivity. These advances promise unprecedented insight into the structure of prions and the mechanisms by which they originate and propagate. PMID:21947062

  15. Strain gradient effects on cyclic plasticity

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof; Legarth, Brian Nyvang

    2010-01-01

    Size effects on the cyclic shear response are studied numerically using a recent higher order strain gradient visco-plasticity theory accounting for both dissipative and energetic gradient hardening. Numerical investigations of the response under cyclic pure shear and shear of a finite slab between...... rigid platens have been carried out, using the finite element method. It is shown for elastic–perfectly plastic solids how dissipative gradient effects lead to increased yield strength, whereas energetic gradient contributions lead to increased hardening as well as a Bauschinger effect. For linearly...... hardening materials it is quantified how dissipative and energetic gradient effects promote hardening above that of conventional predictions. Usually, increased hardening is attributed to energetic gradient effects, but here it is found that also dissipative gradient effects lead to additional hardening in...

  16. Ultrafast strain engineering in complex oxide heterostructures

    Energy Technology Data Exchange (ETDEWEB)

    Popovich, Paul; Caviglia, Andrea; Hu, Wanzheng; Bromberger, Hubertus; Singla, Rashmi; Mitrano, Matteo; Hoffmann, Matthias C.; Kaiser, Stefan; Foerst, Michael [Max-Planck Research Group for Structural Dynamics - Center for Free Electron Laser Science, University of Hamburg (Germany); Scherwitzl, Raoul; Zubko, Pavlo; Gariglio, Sergio; Triscone, Jean-Marc [Departement de Physique de la Matiere Condensee, University of Geneva, 24 Quai Ernest-Ansermet, 1211 Geneve 4, Geneva (Switzerland); Cavalleri, Andrea [Max-Planck Research Group for Structural Dynamics - Center for Free Electron Laser Science, University of Hamburg (Germany); Department of Physics, Clarendon Laboratory, University of Oxford (United Kingdom)

    2012-07-01

    The mechanical coupling between the substrate and the thin film is expected to be effective on the ultrafast timescale, and could be exploited for the dynamic control of materials properties. Here, we demonstrate that a large-amplitude mid-infrared field, made resonant with a stretching mode of the substrate, can switch the electronic properties of a thin film across an interface. Exploiting dynamic strain propagation between different components of a heterostructure, insulating antiferromagnetic NdNiO{sub 3} is driven through a prompt, five-order-of-magnitude increase of the electrical conductivity, with resonant frequency and susceptibility that is controlled by choice of the substrate material. Vibrational phase control, extended here to a wide class of heterostructures and interfaces, may be conductive to new strategies for electronic phase control at THz repetition rates.

  17. Social relations: network, support and relational strain

    DEFF Research Database (Denmark)

    Due, P; Holstein, B; Lund, Rikke;

    1999-01-01

    ,011. The postal questionnaires were answered by a random sample in each of the age groups. The results show marked age and gender differences in both the structure and the function of social relations. The social network, measured as weekly contacts, weakens with age and so does instrumental support. Emotional......We introduce a conceptual framework with social relations as the main concept and the structure and the function of social relations as subconcepts. The structure of social relations covers aspects of formal relations and social network. The function of social relations covers social support...... support is unrelated to this decline in contact frequency and appears to be at the same level for younger and older individuals. Relational strain, measured as conflicts, declines with age for all kinds of social relations. The weakening of the social network with age does not seem to affect the level...

  18. Landau Levels in Strained Optical Lattices.

    Science.gov (United States)

    Tian, Binbin; Endres, Manuel; Pekker, David

    2015-12-01

    We propose a hexagonal optical lattice system with spatial variations in the hopping matrix elements. Just like in the valley Hall effect in strained graphene, for atoms near the Dirac points the variations in the hopping matrix elements can be described by a pseudomagnetic field and result in the formation of Landau levels. We show that the pseudomagnetic field leads to measurable experimental signatures in momentum resolved Bragg spectroscopy, Bloch oscillations, cyclotron motion, and quantization of in situ densities. Our proposal can be realized by a slight modification of existing experiments. In contrast to previous methods, pseudomagnetic fields are realized in a completely static system avoiding common heating effects and therefore opening the door to studying interaction effects in Landau levels with cold atoms.

  19. Pile Model Tests Using Strain Gauge Technology

    Science.gov (United States)

    Krasiński, Adam; Kusio, Tomasz

    2015-09-01

    Ordinary pile bearing capacity tests are usually carried out to determine the relationship between load and displacement of pile head. The measurement system required in such tests consists of force transducer and three or four displacement gauges. The whole system is installed at the pile head above the ground level. This approach, however, does not give us complete information about the pile-soil interaction. We can only determine the total bearing capacity of the pile, without the knowledge of its distribution into the shaft and base resistances. Much more information can be obtained by carrying out a test of instrumented pile equipped with a system for measuring the distribution of axial force along its core. In the case of pile model tests the use of such measurement is difficult due to small scale of the model. To find a suitable solution for axial force measurement, which could be applied to small scale model piles, we had to take into account the following requirements: - a linear and stable relationship between measured and physical values, - the force measurement accuracy of about 0.1 kN, - the range of measured forces up to 30 kN, - resistance of measuring gauges against aggressive counteraction of concrete mortar and against moisture, - insensitivity to pile bending, - economical factor. These requirements can be fulfilled by strain gauge sensors if an appropriate methodology is used for test preparation (Hoffmann [1]). In this paper, we focus on some aspects of the application of strain gauge sensors for model pile tests. The efficiency of the method is proved on the examples of static load tests carried out on SDP model piles acting as single piles and in a group.

  20. Development of a PCR assay for the strain-specific identification of probiotic strain Lactobacillus paracasei IMPC2.1.

    Science.gov (United States)

    Sisto, Angelo; De Bellis, Palmira; Visconti, Angelo; Morelli, Lorenzo; Lavermicocca, Paola

    2009-11-30

    Recent investigations clearly indicate that the probiotic bacterium Lactobacillus paracasei IMPC2.1 can be incorporated into vegetables to obtain innovative probiotic foods whose marketing has been authorized by the Italian Ministry of Health. In this study, strain IMPC2.1 was characterized at a molecular level in order to define its taxonomic position and to develop a PCR test for strain-specific identification. Molecular methods, such as 16S rRNA gene sequencing and multiplex PCR, have provided evidence that strain IMPC2.1 indeed belongs to the L. paracasei species. In addition, a cluster analysis of fluorescent amplified fragment length polymorphism (f-AFLP) data strongly indicated that strain IMPC2.1 and nine other L. paracasei strains (including strain ATCC 334) belong to the same species and are definitely differentiated from the type strain L. casei ATCC 393. The f-AFLP technique was also used to identify a strain-specific DNA fragment of L. paracasei IMPC2.1 - encoding an amino acid sequence similar to a glycosyltransferase of probiotic strain Lactobacillus rhamnosus HN001 - which enabled us to develop a rapid PCR test for strain-specific identification. The strain-specificity of the PCR test was assessed by comparison with a total of 73 bacterial strains mainly isolated from vegetable products that did not produce any amplified fragment. These strains belonged to the L. paracasei species, to 6 additional species of Lactobacillus and to Weissella cibaria, W. confusa, Lactococcus lactis, Leuconostoc mesenteroides and Pediococcus pentosaceus. A method similar to the one used in this study can be adopted to develop easy, rapid detection techniques for monitoring other bacteria in complex microbiota. PMID:19833402

  1. A new method of fabricating strained Silicon materials

    Institute of Scientific and Technical Information of China (English)

    YANG Zongren; LIANG Renrong; XU Jun

    2006-01-01

    Strain-relaxed SiGe virtual substrates are of great importance for fabricating strained Si materials.Instead of using graded buffer method to obtain fully relaxed SiGe film, in this study a new method to obtain relaxed SiGe film and strained Si film with much thinner SiGe film was proposed.Almost fully relaxed thin SiGe buffer layer was obtained by Si/SiGe/Si multi-structure oxidation and the SiO2 layer removing before SiGe regrowth.Raman spectroscopy analysis indicates that the regrown SiGe film has a strain relaxation ratio of about 93% while the Si cap layer has a strain of 0.63%.AFM shows good surface roughness.This new method is proved to be a useful approach to fabricate thin relaxed epilayers and strain Si films.

  2. Fumonisin and Ochratoxin Production in Industrial Aspergillus niger Strains

    DEFF Research Database (Denmark)

    Frisvad, Jens Christian; Larsen, Thomas Ostenfeld; Thrane, Ulf;

    2011-01-01

    as safe). However, A. niger has the potential to produce two groups of potentially carcinogenic mycotoxins: fumonisins and ochratoxins. In this study all available industrial and many non-industrial strains of A. niger (180 strains) as well as 228 strains from 17 related black Aspergillus species were...... examined for mycotoxin production. None of the related 17 species of black Aspergilli produced fumonisins. Fumonisins (B(2), B(4), and B(6)) were detected in 81% of A. niger, and ochratoxin A in 17%, while 10% of the strains produced both mycotoxins. Among the industrial strains the same ratios were 83...... of the remaining biomass as animal feed. In conclusion it is recommended to use strains of A. niger with inactive or inactivated gene clusters for fumonisins and ochratoxins, or to choose isolates for biotechnological uses in related non-toxigenic species such as A. tubingensis, A. brasiliensis, A vadensis or A...

  3. Borehole observations of continuous strain and fluid pressure: Chapter 9

    Science.gov (United States)

    Roeloffs, Evelyn A.; Linde, A.T.

    2007-01-01

    Strain is expansion, contraction, or distortion of the volcanic edifice and surrounding crust. As a result of magma movement, volcanoes may undergo enormous strain prior to and during eruption. Global Positioning System (GPS) observations can in principle be used to determine strain by taking the difference between two nearby observations and dividing by the distance between them. Two GPS stations 1 km apart, each providing displacement information accurate to the nearest millimeter, could detect strain as small as 2 mm km-1, or 2 × 10-6. It is possible, however, to measure strains at least three orders of magnitude smaller using borehole strainmeters. In fact, it is even possible to measure strains as small as 10-8 using observations of groundwater levels in boreholes.

  4. Strain engineering of diamond silicon vacancy centers in MEMS cantilevers

    Science.gov (United States)

    Meesala, Srujan; Sohn, Young-Ik; Atikian, Haig; Holzgrafe, Jeffrey; Zhang, Mian; Burek, Michael; Loncar, Marko

    2016-05-01

    The silicon vacancy (SiV) center in diamond has recently attracted attention as a solid state quantum emitter due to its attractive optical properties. We fabricate diamond MEMS cantilevers, and use electrostatic actuation to apply controlled strain fields to single SiV centers implanted in these devices. The strain response of the four electronic transitions of the SiV at 737 nm is measured via cryogenic (4 K) photoluminescence excitation. We demonstrate over 300 GHz of tuning for the mean transition frequency between the ground and excited states, and over 100 GHz of tuning for the orbital splittings within the ground and excited states. The interaction Hamiltonian for strain fields is inferred, and large strain susceptibilities of the order 1 PHz/strain are measured. We discuss prospects to utilize our device to reduce phonon-induced decoherence in SiV spin qubits, and to exploit the large strain susceptibilities for hybrid quantum systems based on nanomechanical resonators.

  5. Genomic and gene variation in Mycoplasma hominis strains

    DEFF Research Database (Denmark)

    Christiansen, Gunna; Andersen, H; Birkelund, Svend;

    1987-01-01

    DNAs from 14 strains of Mycoplasma hominis isolated from various habitats, including strain PG21, were analyzed for genomic heterogeneity. DNA-DNA filter hybridization values were from 51 to 91%. Restriction endonuclease digestion patterns, analyzed by agarose gel electrophoresis, revealed no...... identity or cluster formation between strains. Variation within M. hominis rRNA genes was analyzed by Southern hybridization of EcoRI-cleaved DNA hybridized with a cloned fragment of the rRNA gene from the mycoplasma strain PG50. Five of the M. hominis strains showed identical hybridization patterns. These...... hybridization patterns were compared with those of 12 other mycoplasma species, which showed a much more complex band pattern. Cloned nonribosomal RNA gene fragments of M. hominis PG21 DNA were analyzed, and the fragments were used to demonstrate heterogeneity among the strains. A monoclonal antibody against...

  6. Environment Identification in Flight using Sparse Approximation of Wing Strain

    CERN Document Server

    Manohar, Krithika; Kutz, J Nathan

    2016-01-01

    This paper addresses the problem of identifying different flow environments from sparse data collected by wing strain sensors. Insects regularly perform this feat using a sparse ensemble of noisy strain sensors on their wing. First, we obtain strain data from numerical simulation of a Manduca sexta hawkmoth wing undergoing different flow environments. Our data-driven method learns low-dimensional strain features originating from different aerodynamic environments using Proper Orthogonal Decomposition (POD) modes in the frequency domain, and leverages compressed sensing and sparse approximation to classify a set of strain frequency signatures using a dictionary of POD modes. This bio-inspired machine learning architecture for dictionary learning and sparse classification permits fewer costly physical strain sensors while being simultaneously robust to sensor noise. A sensor placement algorithm identifies the frequency samples that best separate the different aerodynamic environments in rank-reduced POD feature...

  7. Strain Engineering to Modify the Electrochemistry of Energy Storage Electrodes

    Science.gov (United States)

    Muralidharan, Nitin; Carter, Rachel; Oakes, Landon; Cohn, Adam P.; Pint, Cary L.

    2016-06-01

    Strain engineering has been a critical aspect of device design in semiconductor manufacturing for the past decade, but remains relatively unexplored for other applications, such as energy storage. Using mechanical strain as an input parameter to modulate electrochemical potentials of metal oxides opens new opportunities intersecting fields of electrochemistry and mechanics. Here we demonstrate that less than 0.1% strain on a Ni-Ti-O based metal-oxide formed on superelastic shape memory NiTi alloys leads to anodic and cathodic peak potential shifts by up to ~30 mV in an electrochemical cell. Moreover, using the superelastic properties of NiTi to enable strain recovery also recovers the electrochemical potential of the metal oxide, providing mechanistic evidence of strain-modified electrochemistry. These results indicate that mechanical energy can be coupled with electrochemical systems to efficiently design and optimize a new class of strain-modulated energy storage materials.

  8. Design of Monolithic Integrator for Strain-to-Frequency Converter

    Directory of Open Access Journals (Sweden)

    Tuan Mohd. Khairi Tuan Mat

    2012-01-01

    Full Text Available Strain-to-Frequency converter (SFC is a one of the analog conditioner tools that converts any strain signal to the frequency signal. The basic concept of SFC is by detecting any changing of strains, then converting the strain to the voltage signal and converting the voltage signal to the frequency signal. This tool consists of 3 main  components which are strain gauge, differential integrator and comparator. This paper presents the designing and analysis of monolithic integrator that to be used in the Strain-toFrequency converter. The primary goal is to design and simulate the performance of monolithic integrator for SFC using GATEWAY Silvaco Electronic Design Automation (S EDA tools and EXPERT software. The performances of SFC using the designed monolithic integrator are also investigated.

  9. Ultra-responsive soft matter from strain-stiffening hydrogels

    Science.gov (United States)

    Jaspers, Maarten; Dennison, Matthew; Mabesoone, Mathijs F. J.; Mackintosh, Frederick C.; Rowan, Alan E.; Kouwer, Paul H. J.

    2014-12-01

    The stiffness of hydrogels is crucial for their application. Nature’s hydrogels become stiffer as they are strained. This stiffness is not constant but increases when the gel is strained. This stiffening is used, for instance, by cells that actively strain their environment to modulate their function. When optimized, such strain-stiffening materials become extremely sensitive and very responsive to stress. Strain stiffening, however, is unexplored in synthetic gels since the structural design parameters are unknown. Here we uncover how readily tuneable parameters such as concentration, temperature and polymer length impact the stiffening behaviour. Our work also reveals the marginal point, a well-described but never observed, critical point in the gelation process. Around this point, we observe a transition from a low-viscous liquid to an elastic gel upon applying minute stresses. Our experimental work in combination with network theory yields universal design principles for future strain-stiffening materials.

  10. True Stress-True Strain Models for Structural Steel Elements

    OpenAIRE

    Arasaratnam, P.; K. S. Sivakumaran; Tait, M J

    2011-01-01

    A standard uniaxial tensile test, which establishes the engineering stress-strain relationship, in general, provides the basic mechanical properties of steel required by a structural designer. Modern numerical analysis techniques used for analysis of large strain problems such as failure analysis of steel structures and elements metal forming, metal cutting, and so forth, will require implementation and use of true stress-true strain material characterization. This paper establishes a five st...

  11. Low-temperature strain gauges based on silicon whiskers

    OpenAIRE

    Druzhinin A. A.; Maryamova I. I.; Kutrakov A. P.; Pavlovskyy I. V.

    2008-01-01

    To create low-temperature strain gauges based on p-type silicon whiskers tensoresistive characteristics of these crystals in 4,2—300 K temperature range were studied. On the basis of p-type Si whiskers with different resistivity the strain gauges for different materials operating at cryogenic temperatures with extremely high gauge factor at 4,2 K were developed, as well as strain gauges operating at liquid helium temperatures in high magnetic fields.

  12. Strain measurement at the knee ligament insertion sites

    OpenAIRE

    Hinterwimmer, S; Baumgart, R.; Plitz, W.

    2003-01-01

    We describe the modification of an existing method of ligament strain measurement at the knee joint in detail. At ten fresh joint specimens we used that technique where strain gauges are attached to the ligamentous insertions and origins. We both improved the preparation of the attachment site and the application of the strain gauges. In a special apparatus the specimens were moved from 0degrees extension to 100degrees flexion while simulating muscle strength and axial force. Testing was perf...

  13. Genetic Variability among Strains of the Entomopathogenic Nematode Steinernema feltiae

    OpenAIRE

    Gaugler, Randy; McGuire, Terry; Campbell, James

    1989-01-01

    A systematic program of genetic improvement was initiated by assessing the phenotypic variation of Steinernema feltiae strains for two traits assumed to limit efficacy: ultraviolet tolerance and host-finding ability. All of the strains assayed showed both low ultraviolet tolerance and poor host-finding ability, indicating that the likelihood of improving these traits through more extensive population sampling is remote. Limited genetic variation was detected among the strains for tolerance to...

  14. Identification of Bacillus Strains for Biological Control of Catfish Pathogens

    OpenAIRE

    Ran, Chao; Carrias, Abel; Williams, Malachi A.; Capps, Nancy; Dan, Bui C. T.; Newton, Joseph C.; Joseph W Kloepper; Ooi, Ei L.; Browdy, Craig L.; Terhune, Jeffery S.; Liles, Mark R.

    2012-01-01

    Bacillus strains isolated from soil or channel catfish intestine were screened for their antagonism against Edwardsiella ictaluri and Aeromonas hydrophila, the causative agents of enteric septicemia of catfish (ESC) and motile aeromonad septicaemia (MAS), respectively. Twenty one strains were selected and their antagonistic activity against other aquatic pathogens was also tested. Each of the top 21 strains expressed antagonistic activity against multiple aquatic bacterial pathogens including...

  15. Preliminary Screening of Azolla Strains for Tolerance to Ammonuim Ion

    OpenAIRE

    KITOH, Shunji; SHIOMI, Nobuyuki

    1995-01-01

    Azolla plants (117 strains from 7 species) were screened for tolerance to ammonium ion on the basis of their growth on the medium with or without ammonium. A. nilotica was the most sensitive species of all, followed by A. rubra whereas A. pinnata var. pinnata was the most tolerant one. From A. mexicana, A. caroliniana, A. microphylla and A. pinnata var. pinnata, 12 tolerant strains were selected. There was no tolerant strain in A. filiculoides as far as tested.

  16. Quantifying residual strains in specimens prepared by additive layer manufacturing

    OpenAIRE

    Okioga, A.N.; Greene, R.J.; Tomlinson, R.A.

    2014-01-01

    Residual stresses and strains are prevalent in many components, especially those that are made using additive layer manufacturing. The residual strains are superposed onto any applied load, which in experimental analysis may lead to inaccurate results. The manufacture of a component with known residual strains in all build orientations will enable it to be tested in its green state with results similar to an annealed counterpart. This study has been conducted to explore the relationship betwe...

  17. Identification of Potato Virus Y Strains in Tobacco Crops

    OpenAIRE

    Jelena Zindović; Janoš Berenji; Milena Pauković; Ivana Đekić; Aleksandra Bulajić; Branka Krstić

    2007-01-01

    Five viruses: Potato Virus Y (PVY), Tomato Spotted Wilt Virus, Cucumber Mosaic Virus, Tobacco Mosaic Virus and Alfalfa Mosaic Virus, of which PVY was predominant, were detected by serological testing of tobacco samples collected from many localities in Vojvodina in 2006. Viruses are the most important pathogens in tobacco and PVY causes considerable economic damages all over the world. A PVY population comprises several different strain groups, strain subgroups and recombinant strains. Among ...

  18. Tensile Properties of Fiber Materials under Different Strain Rates

    Institute of Scientific and Technical Information of China (English)

    XIONG Jie; GU Bo-hong; WANG Shan-yuan

    2002-01-01

    The quasi-static and dynamic tensile tests of aranid and high strength PVA fiber bundles are carried out under a wider range of strain rate by use of MTS (Materials Testing System) and bar-bar tensile impact apparatus.The influences of strain rate on mechanical properties of aramid and high strength polyvinyl alcohol fibers ar estudied. Micro failure mechanisms of fibers at different strain rates are examined by means of SEM.

  19. Low-temperature strain gauges based on silicon whiskers

    Directory of Open Access Journals (Sweden)

    Druzhinin A. A.

    2008-08-01

    Full Text Available To create low-temperature strain gauges based on p-type silicon whiskers tensoresistive characteristics of these crystals in 4,2—300 K temperature range were studied. On the basis of p-type Si whiskers with different resistivity the strain gauges for different materials operating at cryogenic temperatures with extremely high gauge factor at 4,2 K were developed, as well as strain gauges operating at liquid helium temperatures in high magnetic fields.

  20. Differences in taste in button mushroom strains (Agaricus bisporus)

    OpenAIRE

    Baars, J.J.P.; Stijger, I.; M. Kersten; Sonnenberg, A.S.M.

    2014-01-01

    This report describes the results of a screening of genetically diverse strains of mushroom Agaricus bisporus for differences in taste. Eight different strains were grown on regular commercial compost and casing soil. Two of these strains were also grown on a casing with calcium chloride added to increase osmotic value. The intension was to increase the dry matter content of the mushrooms that might affect the “bite” sensation of mushrooms.

  1. Vectorial strain gauge method using single flexible orthogonal polydimethylsiloxane gratings

    OpenAIRE

    Hao Guo; Jun Tang; Kun Qian; Dimitris Tsoukalas; Miaomiao Zhao; Jiangtao Yang; Binzhen Zhang; Xiujian Chou; Jun Liu; Chenyang Xue; Wendong Zhang

    2016-01-01

    A vectorial strain gauge method using a single sensing element is reported based on the double-sided polydimethylsiloxane (PDMS) Fraunhofer diffraction gratings structures. Using O2 plasma treatment steps, orthogonal wrinkled gratings were fabricated on both sides of a pre-strained PDMS film. Diffracted laser spots from this structure have been used to experimentally demonstrate, that any applied strain can be quantitatively characterized in both the x and y directions with an error of less t...

  2. Magneto-strain-driven quantum engine on a graphene flake

    OpenAIRE

    Peña, Francisco J.; Muñoz, Enrique

    2015-01-01

    We propose a novel conceptual design for a graphene-based quantum engine, driven by a superposition of mechanical strain and an external magnetic field. Engineering of strain in a nanoscale graphene flake creates a gauge field with an associated uniform pseudo-magnetic field. The strain-induced pseudo-magnetic field can be combined with a real magnetic field, leading to the emergence of discrete relativistic Landau levels within the single-particle picture. The inter-level distance and hence ...

  3. Improvements In A Laser-Speckle Surface-Strain Gauge

    Science.gov (United States)

    Lant, Christian T.

    1996-01-01

    Compact optical subsystem incorporates several improvements over optical subsystems of previous versions of laser-speckle surface-strain gauge: faster acquisition of data, faster response to transients, reduced size and weight, lower cost, and less complexity. Principle of operation described previously in "Laser System Measures Two-Dimensional Strain" (LEW-15046), and "Two-Dimensional Laser-Speckle Surface-Strain Gauge" (LEW-15337).

  4. "Behaviour changes in Permethrin-resistant strain of Anopheles Stephensi "

    Directory of Open Access Journals (Sweden)

    Vatandoost H

    2000-09-01

    Full Text Available Behaviour studies indicated that the permethrin resistant strin of An. Stephensi was 3-fold resistant to knock-down compared with the susceptible strain. The resistant strain was however 3-fold less irritable to permethrin and less responsive than the susceptible strain to the movement of an aspirator. If reduced irritability and reduced responsiveness to catch are consequences of the changes in the nervous system, then such a form of resistance may be disadvantageous to mosquitoes in natural populations.

  5. Context and strain-dependent behavioral response to stress

    OpenAIRE

    Baum Amber E; Ahmadiyeh Nasim; Andrus Brian M; Dennis Kristen; Nosek Katarzyna; Woods Leah; Redei Eva E

    2008-01-01

    Abstract Background This study posed the question whether strain differences in stress-reactivity lead to differential behavioral responses in two different tests of anxiety. Strain differences in anxiety-measures are known, but strain differences in the behavioral responses to acute prior stress are not well characterized. Methods We studied male Fisher 344 (F344) and Wistar Kyoto (WKY) rats basally and immediately after one hour restraint stress. To distinguish between the effects of novelt...

  6. Evolution of bulk strain solitons in cylindrical inhomogeneous shells

    Energy Technology Data Exchange (ETDEWEB)

    Shvartz, A., E-mail: andrew.shvartz@mail.ioffe.ru; Samsonov, A.; Dreiden, G.; Semenova, I. [Ioffe Institute, 26 Politekhnicheskaya, St Petersburg 194021 (Russian Federation)

    2015-10-28

    Bulk strain solitary waves in nonlinearly elastic thin-walled cylindrical shells with variable geometrical and physical parameters are studied, and equation for the longitudinal strain component with the variable coefficients is derived. A conservative finite difference scheme is proposed, and the results of numerical simulation of the strain soliton evolution in a shell with the abrupt variations of cross section and physical properties of the material are presented.

  7. In Vitro Antifungal Activity of Strains of Trichoderma harzianum

    OpenAIRE

    KÜÇÜK, Çiğdem; Merih KIVANÇ

    2004-01-01

    Interactions between Trichoderma harzianum strains and some soilborne plant pathogens (Gaeumannomyces graminis var. tritici, Fusarium culmorum and F. moniliforme) were studied on PDA medium. All T. harzianum strains tested produced a metabolite that inhibited growth of plant pathogenic fungi on PDA medium. When grown in liquid cultures containing laminarin, chitin or fungal cell walls as sole carbon sources, 2 strains of T. harzianum produced 1,3-b-glucanase and chitinase in the medium. Highe...

  8. Mixed multilayered vertical heterostructures utilizing strained monolayer WS2.

    OpenAIRE

    Sheng, Y.; Xu, W.; Wang, X.; He, Z.; Rong, Y.; Warner, JH

    2016-01-01

    Creating alternating layers of 2D materials forms vertical heterostructures with diverse electronic and opto-electronic properties. Monolayer WS2 grown by chemical vapour deposition can have inherent strain due to interactions with the substrate. The strain modifies the band structure and properties of monolayer WS2 and can be exploited in a wide range of applications. We demonstrate a non-aqueous transfer method for creating vertical stacks of mixed 2D layers containing a strained monolayer ...

  9. Visualization of ion transport in Nafion using electrochemical strain microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Suran; No, Kwangsoo; Hong, Seungbum

    2015-12-24

    The electromechanical response of a Nafion membrane immersed in water was probed using electrochemical strain microscopy (ESM) to redistribute protons and measure the resulting local strain that is caused by the movement of protons. We also measured the relaxation of protons from the surface resulting from proton diffusion. Using this technique, we can visualize and analyze the local strain change resulting from the redistribution and relaxation of hydrated protons.

  10. Production of Sulfur Flavors by Ten Strains of Geotrichum candidum

    OpenAIRE

    Berger, Celine; Khan, Jeffrey A.; Molimard, Pascal; Martin, Nathalie; Spinnler, Henry E.

    1999-01-01

    Ten strains of Geotrichum candidum were studied on a liquid cheese model medium for the production of sulfur compounds which contribute to the aroma of cheeses. The volatile components produced by each cultured strain were extracted by dynamic headspace extractions, separated and quantified by gas chromatography (GC), and identified by GC-mass spectrometry. It was shown that four strains of this microorganism produced significant quantities of S-methyl thioacetate, S-methyl thiopropionate, S-...

  11. Sub-metre spatial resolution temperature compensated distributed strain sensor

    OpenAIRE

    Belal, M.; Newson, T.P.

    2010-01-01

    We propose and demonstrate a scheme which utilizes the temperature dependence of spontaneous Raman scattering to provide temperature compensation for a sub-metre spatial resolution Brillouin frequency based strain sensor. Temperature compensated strain sensor measurements have been demonstrated with a strain resolution of 94?? and a spatial resolution of 10cms. This paper describes the combination of Brillouin frequency based BOCDA technique [1] with an independent measurement of temperature,...

  12. Stabilization of a histidine-producing strain of Serratia marcescens.

    OpenAIRE

    Sugiura, M; Kisumi, M

    1984-01-01

    A decrease in histidine productivity was observed during subculture of a histidine-producing strain of Serratia marcescens. The decrease was accompanied by an increase in the number of wild-type revertants. Adenine accelerated the growth of producing strain HT-2892 to nearly equal that of revertants, and histidine production was stable because the depletion of ATP in strain HT-2892 was restored by adenine. To increase the intracellular ATP content, mutants resistant to 6-methylpurine, an anta...

  13. Genotypic comparison of Pantoea agglomerans plant and clinical strains

    Directory of Open Access Journals (Sweden)

    Frey Jürg E

    2009-09-01

    Full Text Available Abstract Background Pantoea agglomerans strains are among the most promising biocontrol agents for a variety of bacterial and fungal plant diseases, particularly fire blight of apple and pear. However, commercial registration of P. agglomerans biocontrol products is hampered because this species is currently listed as a biosafety level 2 (BL2 organism due to clinical reports as an opportunistic human pathogen. This study compares plant-origin and clinical strains in a search for discriminating genotypic/phenotypic markers using multi-locus phylogenetic analysis and fluorescent amplified fragment length polymorphisms (fAFLP fingerprinting. Results Majority of the clinical isolates from culture collections were found to be improperly designated as P. agglomerans after sequence analysis. The frequent taxonomic rearrangements underwent by the Enterobacter agglomerans/Erwinia herbicola complex may be a major problem in assessing clinical associations within P. agglomerans. In the P. agglomerans sensu stricto (in the stricter sense group, there was no discrete clustering of clinical/biocontrol strains and no marker was identified that was uniquely associated to clinical strains. A putative biocontrol-specific fAFLP marker was identified only in biocontrol strains. The partial ORF located in this band corresponded to an ABC transporter that was found in all P. agglomerans strains. Conclusion Taxonomic mischaracterization was identified as a major problem with P. agglomerans, and current techniques removed a majority of clinical strains from this species. Although clear discrimination between P. agglomerans plant and clinical strains was not obtained with phylogenetic analysis, a single marker characteristic of biocontrol strains was identified which may be of use in strain biosafety determinations. In addition, the lack of Koch's postulate fulfilment, rare retention of clinical strains for subsequent confirmation, and the polymicrobial nature of P

  14. Twinning in copper deformed at high strain rates

    Indian Academy of Sciences (India)

    S Cronje; R E Kroon; W D Roos; J H Neethling

    2013-02-01

    Copper samples having varying microstructures were deformed at high strain rates using a split-Hopkinson pressure bar. Transmission electron microscopy results show deformation twins present in samples that were both annealed and strained, whereas samples that were annealed and left unstrained, as well as samples that were unannealed and strained, are devoid of these twins. These deformation twins occurred at deformation conditions less extreme than previously predicted.

  15. Experimental strain analysis of Clarens Sandstone colonised by endolithic lichens

    OpenAIRE

    Wessels, D; Venter, D; Wessels, W.; L Wessels

    1995-01-01

    Endolithic lichens occur commonly on Clarens Sandstone in South Africa, where they significantly contribute to the weathering of sandstone by means of mechanical and chemical weathering processes. This preliminary investigation reports on the success- ful use of strain gauges in detecting strain differences between sandstone without epilithic lichens and sandstone colonised by the euendolithic lichen Lecidea aff. sarcogynoides Korb. Mechanical weathering, expressed as strain changes, in Clare...

  16. The application of 'strain range partitioning method' to torsional creep-fatigue interaction

    Science.gov (United States)

    Zamrik, S. Y.; Bilir, O. G.

    1975-01-01

    The method of strain range partitioning was applied to a series of torsional fatigue tests conducted on tubular 304 stainless steel specimens at 1200 F (649 C). Creep strain was superimposed on cycling strain, and the resulting strain range was partitioned into four components; completely reversed plastic shear strain followed by creep strain, creep strain followed by plastic strain and completely reversed creep strain. Each strain component was related to the cyclic life of the material. The paper describes the experimental procedure used to achieve strain partitioning and the torsional test results are compared to those obtained from axial tests. The damaging effects of the individual strain components were expressed by a linear life fraction rule. The shear strain plastic component showed the least detrimental factor when compared to creep strain reversal by plastic strain. In the latter case, a reduction of torsional fatigue life in the order of magnitude of 1.5 was observed.

  17. The Application of Strain Range Partitioning Method to Torsional Creep-Fatigue Interaction

    Science.gov (United States)

    Zamrik, S. Y.

    1975-01-01

    The method of strain range partitioning was applied to a series of torsional fatigue tests conducted on tubular 304 stainless steel specimens at 1200 F. Creep strain was superimposed on cycling strain, and the resulting strain range was partitioned into four components; completely reversed plastic shear strain, plastic shear strain followed by creep strain, creep strain followed by plastic strain and completely reversed creep strain. Each strain component was related to the cyclic life of the material. The damaging effects of the individual strain components were expressed by a linear life fraction rule. The plastic shear strain component showed the least detrimental factor when compared to creep strain reversed by plastic strain. In the latter case, a reduction of torsional fatigue life in the order of magnitude of 1.5 was observed.

  18. Study of silicon strain gauges under electron irradiation

    OpenAIRE

    Liakh-Kaguj N. S.; Masluk V. T.; Kutrakov A. P.; Maryamova I. I.; Druzhinin A. A.; Mehela I. G.

    2010-01-01

    The characteristics of semiconductor strain gauges based on boron doped р-type silicon whiskers under high energy electron irradiation were studied. Strain gauges were irradiated at room temperature by electrons with energies 4,2—14 MeV and different doses 5·1016—1·1018 el/cm2. The main parameters of irradiated strain gauges: resistance, its temperature dependence and resistance change vs strain at –196…+100°C and –269…+20°C temperature ranges were measured. There are determined the values of...

  19. Identification of Diarrheagenic Escherichia coli Strains from Avian Organic Fertilizers

    Directory of Open Access Journals (Sweden)

    Juan Puño-Sarmiento

    2014-08-01

    Full Text Available The Brazilian poultry industry generates large amounts of organic waste, such as chicken litter, which is often used in agriculture. Among the bacteria present in organic fertilizer are members of the Enterobacteriaceae family. The objective of this study was to detect the presence of diarrheagenic Escherichia coli (DEC strains in avian organic fertilizer, and assess the potential damage they can cause in humans due to antimicrobial resistance. The presence of DEC pathotypes and phylogenetic groups were detected by multiplex-PCR. Phenotypic assays, such as tests for adhesion, cytotoxicity activity, biofilm formation and especially antimicrobial susceptibility, were performed. Fifteen DEC strains from 64 E. coli were isolated. Among these, four strains were classified as enteropathogenic (EPEC; 6.2%, three strains as Shiga toxin-producing (STEC; 4.7%, 10 strains as enteroaggregative (EAEC; 12.5%, but two of these harbored the eaeA gene too. The low number of isolated strains was most likely due to the composting process, which reduces the number of microorganisms. These strains were able to adhere to HEp-2 and HeLa cells and produce Shiga-toxins and biofilms; in addition, some of the strains showed antimicrobial resistance, which indicates a risk of the transfer of resistance genes to human E. coli. These results showed that DEC strains isolated from avian organic fertilizers can cause human infections.

  20. Identification of diarrheagenic Escherichia coli strains from avian organic fertilizers.

    Science.gov (United States)

    Puño-Sarmiento, Juan; Gazal, Luis Eduardo; Medeiros, Leonardo P; Nishio, Erick K; Kobayashi, Renata K T; Nakazato, Gerson

    2014-08-28

    The Brazilian poultry industry generates large amounts of organic waste, such as chicken litter, which is often used in agriculture. Among the bacteria present in organic fertilizer are members of the Enterobacteriaceae family. The objective of this study was to detect the presence of diarrheagenic Escherichia coli (DEC) strains in avian organic fertilizer, and assess the potential damage they can cause in humans due to antimicrobial resistance. The presence of DEC pathotypes and phylogenetic groups were detected by multiplex-PCR. Phenotypic assays, such as tests for adhesion, cytotoxicity activity, biofilm formation and especially antimicrobial susceptibility, were performed. Fifteen DEC strains from 64 E. coli were isolated. Among these, four strains were classified as enteropathogenic (EPEC; 6.2%), three strains as Shiga toxin-producing (STEC; 4.7%), 10 strains as enteroaggregative (EAEC; 12.5%), but two of these harbored the eaeA gene too. The low number of isolated strains was most likely due to the composting process, which reduces the number of microorganisms. These strains were able to adhere to HEp-2 and HeLa cells and produce Shiga-toxins and biofilms; in addition, some of the strains showed antimicrobial resistance, which indicates a risk of the transfer of resistance genes to human E. coli. These results showed that DEC strains isolated from avian organic fertilizers can cause human infections.

  1. MM98.57 Quantification of Combined Strain Paths

    DEFF Research Database (Denmark)

    Nielsen, Morten Sturgård; Wanheim, Tarras

    1998-01-01

    Hitherto the quantification of material properties of a material submitted to a deformation has been taken as a function of one or more internal variables. When making measurements of yield properties as a function of a deformation a convenient way of describing the deformation in an experiment is...... surface at a given point in a new strain history. A simple example of this concept is to take the length of the strain curve as describing scalar relation: E.g. to use the equivalent strain as parameter for describing the yield stress. This paper focuses on the strain curve concept and the possibilities...

  2. Effect of strain on surface diffusion and nucleation

    DEFF Research Database (Denmark)

    Brune, Harald; Bromann, Karsten; Röder, Holger;

    1995-01-01

    The influence of strain on diffusion and nucleation has been studied by means of scanning tunneling microscopy and effective-medium theory for Ag self-diffusion on strained and unstrained (111) surfaces. Experimentally, the diffusion barrier is observed to be substantially lower on a pseudomorphic...... Ag monolayer on Pt(111), 60 meV, compared to that on Ag(111), 97 meV. The calculations show that this strong effect is due to the 4.2% compressive strain of the Ag monolayer on Pt. It is shown that in general isotropic two-dimensional strain as well as its relief via dislocations have a drastic...

  3. Artifact reduction in HARP strain maps using anisotropic smoothing

    Science.gov (United States)

    Abd-Elmoniem, Khaled Z.; Parthasarathy, Vijay; Prince, Jerry L.

    2006-03-01

    Harmonic phase (HARP) MRI is used to measure myocardial motion and strain from tagged MR images. HARP MRI uses limited number of samples from the spectrum of the tagged images to reconstruct motion and strain. The HARP strain maps, however, suffer from artifacts that limit the accuracy of the computations and degrade the appearance of the strain maps. Causes of these, so called 'zebra', artifacts include image noise, Gibbs ringing, and interference from other Fourier spectral peaks. Computing derivatives of the HARP phase, which are needed to estimate strain, further accentuates these artifacts. Previous methods to reduce these artifacts include 1-D and 2-D nonlinear filtering of the HARP derivatives, and a 2-D linear filtering of unwrapped HARP phase. A common drawback among these methods is the lack of proper segmentation of the myocardium from the blood pool. Because of the lack of segmentation, the noisy phase values from the blood pool enter into the computation in the smoothed strain maps, which causes artifacts. In this work, we propose a smoothing method based on anisotropic diffusion that filters the HARP derivatives strictly within the myocardium without the need for prior segmentation. The information about tissue geometry and the strain distribution is used to restrict the smoothing to within the myocardium, thereby ensuring minimum distortion of the final strain map. Preliminary results demonstrate the ability of anisotropic diffusion for better artifact reduction and lesser strain distortion than the existing methods.

  4. Phospholipase C in Beijing strains of Mycobacterium tuberculosis

    Directory of Open Access Journals (Sweden)

    N Faramarzi

    2010-12-01

    Full Text Available Background and Objectives: Phospholipase of Mycobacterium tuberculosis plays an important role in pathogenesis through breaking up phospholipids and production of diacylglycerol. In this study, we examined the Beijing strains of Mycobacterium tuberculosis isolated from Iranian patients for the genes encoding this enzyme."nMaterials and Methods: DNA extraction was performed using CTAB (cetyltrimethylammonium bromide from positive culture specimens in tuberculosis patients. PCR was then used to amplify the plcA, plcB, plcC genes of Beijing strain, and non-Beijing strains were identified by spoligotyping."nResults: Of 200 specimens, 19 (9.5% were Beijing strain and 181 (90.5% were non-Beijing strains. The results of PCR for Beijing strains were as follows: 16 strains (84.2% were positive for plcA, 17 (89.4% were positive for plcB and 17 (89.4% were positive for plcC genes. The standard strain (H37RV was used as control."nConclusion: The majority of Beijing strains have phospholipase C genes which can contribute to their pathogenesis but we need complementary studies to confirm the role of phospholipase C in pathogenecity of Mycobacterium tuberculosis.

  5. Analysis of 3D strain in the human medial meniscus.

    Science.gov (United States)

    Kolaczek, S; Hewison, C; Caterine, S; Ragbar, M X; Getgood, A; Gordon, K D

    2016-10-01

    This study presents a method to evaluate three-dimensional strain in meniscal tissue using medical imaging. Strain is calculated by tracking small teflon markers implanted within the meniscal tissue using computed tomography imaging. The results are presented for strains in the middle and posterior third of the medial menisci of 10 human cadaveric knees, under simulated physiologically relevant loading. In the middle position, an average compressive strain of 3.4% was found in the medial-lateral direction, and average tensile strains of 1.4% and 3.5% were found in the anterior-posterior and superior-inferior directions respectively at 5° of knee flexion with an applied load of 1× body weight. In the posterior position, under the same conditions, average compressive strains of 2.2% and 6.3% were found in the medial-lateral and superior-inferior directions respectively, and an average tensile strain of 3.8% was found in the anterior-posterior direction. No statistically significant difference between strain in the middle or posterior of the meniscus or between the global strains is uncovered. PMID:27484043

  6. Molecular characterisation of Xanthomonas strains isolated from aroids in Mauritius.

    Science.gov (United States)

    Khoodoo, M H R; Sahin, F; Donmez, M F; Fakim, Y Jaufeerally

    2005-06-01

    Mauritius is one of the largest world producers of Anthurium cut flowers but outbreaks of bacterial blight have never been reported on the island. This work was about the characterisation and identification of bacterial strains isolated from Anthurium andreanum, Dieffenbachia maculata and Aglaonema simplex in Mauritius. Fifteen strains, that showed the morphological properties of Xanthomonas on conventional media, were tested on two semi-selective media (Esculin-trehalose and cellobiose-starch). ELISA tests using a panel of monoclonal antibodies were carried out and three out of 15 strains reacted with a Xanthomonas-specific monoclonal antibody (MAb XII). Analysis using four sets of ribosomal primers revealed that the same three Mauritius strains shared conserved PCR products with reference xanthomonads including virulent strains of Xanthomonas axonopodis pv. dieffenbachiae (Xad). BIOLOG tests and the Sherlock Microbial Identification system (MIDI) identified these three new strains at the species level as X. axonopodis. The complementary tests that were carried out clearly confirmed that the three strains are xanthomonads and, moreover, a DNA probe which showed specificity to Xad strains suggested that the three Mauritius strains are non-virulent forms of the pathogen causing Anthurium blight.

  7. Application of the Strain Design to the Pipeline Construction

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    The buried pipeline passing through the meizoseismal area and active fault zone would induce large deformation, which affected the safety of the pipeline. The model for calculating the pipeline strain with intermal pressure and without internal pressure was established by the researches on the strain design method, mechanical properties and welding process of X80 grade steel pipe. The ultimate strain and allowable slrain were determined and design program and relative requirements based on the strain were proposed by considering the materials deformation abilities,

  8. High catalase production by Rhizobium radiobacter strain 2-1.

    Science.gov (United States)

    Nakayama, Mami; Nakajima-Kambe, Toshiaki; Katayama, Hideki; Higuchi, Kazuhiko; Kawasaki, Yoshio; Fuji, Ryujiro

    2008-12-01

    To promote the application of catalase for treating wastewater containing hydrogen peroxide, bacteria exhibiting high catalase activity were screened. A bacterium, designated strain 2-1, with high catalase activity was isolated from the wastewater of a beverage factory that uses hydrogen peroxide. Strain 2-1 was identified as Rhizobium radiobacter (formerly known as Agrobacterium tumefaciens) on the basis of both phenotypic and genotypic characterizations. Although some strains of R. radiobacter are known plant pathogens, polymerase chain reaction (PCR) analysis showed that strain 2-1 has no phytopathogenic factor. Compared with a type strain of R. radiobacter, the specific catalase activity of strain 2-1 was approximately 1000-fold. Moreover, Strain 2-1 grew faster and exhibited considerably higher catalase activity than other microorganisms that have been used for industrial catalase production. Strain 2-1 is harmless to humans and the environment and produces catalase efficiently, suggesting that strain 2-1 is a good resource for the mass production of catalase for the treatment of hydrogen peroxide-containing wastewater. PMID:19134550

  9. Mead production: selection and characterization assays of Saccharomyces cerevisiae strains.

    Science.gov (United States)

    Pereira, Ana Paula; Dias, Teresa; Andrade, João; Ramalhosa, Elsa; Estevinho, Letícia M

    2009-08-01

    Mead is a traditional drink, which results from the alcoholic fermentation of diluted honey carried out by yeasts. However, when it is produced in a homemade way, mead producers find several problems, namely, the lack of uniformity in the final product, delayed and arrested fermentations, and the production of "off-flavours" by the yeasts. These problems are usually associated with the inability of yeast strains to respond and adapt to unfavourable and stressful growth conditions. The main objectives of this work were to evaluate the capacity of Saccharomyces cerevisiae strains, isolated from honey of the Trás-os-Montes (Northeast Portugal), to produce mead. Five strains from honey, as well as one laboratory strain and one commercial wine strain, were evaluated in terms of their fermentation performance under ethanol, sulphur dioxide and osmotic stress. All the strains showed similar behaviour in these conditions. Two yeasts strains isolated from honey and the commercial wine strain were further tested for mead production, using two different honey (a dark and a light honey), enriched with two supplements (one commercial and one developed by the research team), as fermentation media. The results obtained in this work show that S. cerevisiae strains isolated from honey, are appropriate for mead production. However it is of extreme importance to take into account the characteristics of the honey, and supplements used in the fermentation medium formulation, in order to achieve the best results in mead production. PMID:19481129

  10. Phospholipase C in Beijing strains of Mycobacterium tuberculosis

    Science.gov (United States)

    Mirsamadi, ES; Farnia, P; Jahani Sherafat, S; Esfahani, M; Faramarzi, N

    2010-01-01

    Background and Objectives Phospholipase of Mycobacterium tuberculosis plays an important role in pathogenesis through breaking up phospholipids and production of diacylglycerol. In this study, we examined the Beijing strains of Mycobacterium tuberculosis isolated from Iranian patients for the genes encoding this enzyme. Materials and Methods DNA extraction was performed using CTAB (cetyltrimethylammonium bromide) from positive culture specimens in tuberculosis patients. PCR was then used to amplify the plcA, plcB, plcC genes of Beijing strain, and non-Beijing strains were identified by spoligotyping. Results Of 200 specimens, 19 (9.5%) were Beijing strain and 181 (90.5%) were non-Beijing strains. The results of PCR for Beijing strains were as follows: 16 strains (84.2%) were positive for plcA, 17 (89.4%) were positive for plcB and 17 (89.4%) were positive for plcC genes. The standard strain (H37RV) was used as control. Conclusion The majority of Beijing strains have phospholipase C genes which can contribute to their pathogenesis but we need complementary studies to confirm the role of phospholipase C in pathogenecity of Mycobacterium tuberculosis. PMID:22347572

  11. Characterization of new radioresistant strains of Chlamydomonas reinhardtii

    International Nuclear Information System (INIS)

    The purpose of this work is to investigate 4 new mutant strains of Chlamydomonas reinhardtii induced in respect to their radioresistance at different levels: cellular, molecular and biochemical. A comparison between radioresistance of the strains, DNA-ssb repair activity and pigment contents (chl 'a', chl 'b' and carotenoids) is made. Strain 137C(+) and mutant strains GK-1(+), GK-2(+), GK-3(+), and AKK-9-9(-) are used. The radioresistance has been assessed according to colony forming ability of the strains after irradiation with gamma rays (60C0, I=12.4 rads-1 doses 10, 50, 100, 150, 200 and 250 Gy). The data obtained reveal that there is a relationship between radioresistance, DNA-ssb repair efficiency and plastid pigment content in the tested Chlamydomonas reinhardtii strains. This relationship is most pronounced in strain AK-9-9 which displays the highest level of radioresistance. On the basis of data obtained the authors propose mutant strain AK-9-9 to be included in the existing collection of mutant strains of Chlamydomonas reinhardtii

  12. Changes in the virulence of myxoma virus strains in Britain.

    OpenAIRE

    Ross, J; Sanders, M. F.

    1987-01-01

    National surveys of the virulence of field strains of myxoma virus were carried out in 1975 (128 virus strains) and in 1981 (123 strains), using the virulence testing method employed in a similar survey in 1962. Results showed that the virulence of field strains had increased between 1962 and 1975, and again between 1975 and 1981. The increases in virulence are thought to be a result of the development of resistance to myxomatosis in wild rabbit populations. The effects of the changes in viru...

  13. Strain modulated band gap of edge passivated armchair graphene nanoribbons

    CERN Document Server

    Peng, Xihong

    2011-01-01

    First principles calculations were performed to study strain effects on band gap of armchair graphene nanoribbons (AGNRs)with different edge passivation, including H, O, and OH group. The band gap of the H-passivated AGNRs shows a nearly periodic zigzag variation under strain. For O and OH passivation, the zigzag patterns are significantly shifted by a modified quantum confinement due to the edges. In addition, the band gap of the O-passivated AGNRs experiences a direct-to-indirect transition with sufficient tensile strain (~5%). The indirect gap reduces to zero with further increased strain.

  14. Determination of band offsets in strained-Si heterolayers

    Energy Technology Data Exchange (ETDEWEB)

    Maiti, C.K.; Samanta, S.K.; Chatterjee, S.; Dalapati, G.K.; Bhattacharya, S.; Armstrong, B.M.; Gamble, H.S.; McCarthy, J.; Perova, T.S.; Moore, R.A

    2004-09-01

    Strained-Si/SiGe/Si structures are of increasing importance for microelectronic applications. A fully relaxed-SiGe buffer layer is required for growing strained-Si for applications towards high performance field effect transistors (FETs) having strained-Si as the channel. Preparation of epitaxial strained-Si layers on relaxed-SiGe (001) heterostructures using low pressure chemical vapor deposition (LPCVD) is reported. Gas source molecular beam epitaxy (GSMBE) grown strained-Si films are used to compare with LPCVD strained-Si films. Characterization of the strained-Si layers has been performed using AFM, TEM and Raman spectroscopy. Conduction and valence band offsets of strained-Si on relaxed-SiGe heterostructures have been extracted from measured capacitance-voltage (C-V) profiling of MOS capacitors fabricated on strained-Si using SiO{sub 2} as the dielectric. Extracted experimental values of the valence and conduction band offsets are in good agreement with theoretical predictions.

  15. Large strain cyclic behavior of metastable austenic stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Geijselaers, H.J.M., E-mail: h.j.m.geijselaers@utwente.nl; Hilkhuijsen, P.; Bor, T.C.; Boogaard, A.H. van den

    2015-04-17

    Metastable austenitic stainless steel will transform to martensite when subjected to mechanical working. In this research an austenitic stainless steel has been subjected to large amplitude strain paths containing a strain reversal. During the tests, apart from the stress and the strain also magnetic induction was measured. From the in situ magnetic induction measurements an estimate of the stress partitioning among the phases is determined. When the strain path reversal is applied at low strains, a classical Bauschinger effect is observed. When the strain reversal is applied at higher strains, a higher flow stress is measured after the reversal compared to the flow stress before reversal. Also a stagnation of the transformation is observed, meaning that a higher strain as well as a higher stress than before the strain path change is required to restart the transformation after reversal. The observed behavior can be explained by a model in which for the martensitic transformation a stress induced transformation model is used. The constitutive behavior of both the austenite phase and the martensite is described by a Chaboche model to account for the Bauschinger effect. Mean-field homogenization of the material behavior of the individual phases is employed to obtain a constitutive behavior of the two-phase composite. The overall applied stress, the stress in the martensite phase and the observed transformation behavior during cyclic shear are very well reproduced by the model simulations.

  16. Strain in the mesoscale kinetic Monte Carlo model for sintering

    DEFF Research Database (Denmark)

    Bjørk, Rasmus; Frandsen, Henrik Lund; Tikare, V.;

    2014-01-01

    Shrinkage strains measured from microstructural simulations using the mesoscale kinetic Monte Carlo (kMC) model for solid state sintering are discussed. This model represents the microstructure using digitized discrete sites that are either grain or pore sites. The algorithm used to simulate...... anisotropic strains for homogeneous powder compacts with aspect ratios different from unity. It is shown that the line direction biases shrinkage strains in proportion the compact dimension aspect ratios. A new algorithm that corrects this bias in strains is proposed; the direction for collapsing the column...

  17. Biological and molecular characterizations of Toxoplasma gondii strains

    Science.gov (United States)

    Cole, R.A.; Lindsay, D.S.; Howe, D.K.; Roderick, Constance L.; Dubey, J.P.; Thomas, N.J.; Baeten, L.A.

    2000-01-01

    Toxoplasma gondii was isolated from brain or heart tissue from 15 southern sea otters (Enhydra lutris nereis) in cell cultures. These strains were used to infect mice that developed antibodies to T. gondii as detected in the modified direct agglutination test and had T. gondii tissue cysts in their brains at necropsy. Mouse brains containing tissue cysts from 4 of the strains were fed to 4 cats. Two of the cats excreted T. gondii oocysts in their feces that were infectious for mice. Molecular analyses of 13 strains indicated that they were all type II strains, but that they were genetically distinct from one another.

  18. Isolation, identification and characterization of regional indigenous Saccharomyces cerevisiae strains

    Directory of Open Access Journals (Sweden)

    Hana Šuranská

    2016-03-01

    Full Text Available Abstract In the present work we isolated and identified various indigenous Saccharomyces cerevisiae strains and screened them for the selected oenological properties. These S. cerevisiae strains were isolated from berries and spontaneously fermented musts. The grape berries (Sauvignon blanc and Pinot noir were grown under the integrated and organic mode of farming in the South Moravia (Czech Republic wine region. Modern genotyping techniques such as PCR-fingerprinting and interdelta PCR typing were employed to differentiate among indigenous S. cerevisiae strains. This combination of the methods provides a rapid and relatively simple approach for identification of yeast of S. cerevisiae at strain level. In total, 120 isolates were identified and grouped by molecular approaches and 45 of the representative strains were tested for selected important oenological properties including ethanol, sulfur dioxide and osmotic stress tolerance, intensity of flocculation and desirable enzymatic activities. Their ability to produce and utilize acetic/malic acid was examined as well; in addition, H2S production as an undesirable property was screened. The oenological characteristics of indigenous isolates were compared to a commercially available S. cerevisiae BS6 strain, which is commonly used as the starter culture. Finally, some indigenous strains coming from organically treated grape berries were chosen for their promising oenological properties and these strains will be used as the starter culture, because application of a selected indigenous S. cerevisiae strain can enhance the regional character of the wines.

  19. Tight-binding approach to strain-dependent DNA electronics

    Science.gov (United States)

    Malakooti, Sadeq; Hedin, Eric; Joe, Yong

    2013-07-01

    Small mechanical strain perturbations are considered in calculations of the poly(G)-poly(C) DNA molecular electronic structure, using a tight-binding framework in conjunction with the theories of Slater-Koster and linear elasticity. Results reveal a strain-induced band gap for DNA which is linearly dependent on the induced strain. Local density of states calculations expose that the contribution of the guanine-cytosine base pairs in the charge transport mechanism is significantly enhanced relative to the backbones when DNA is compressed. Transport investigations also disclose a strain-induced metal-semiconductor transition for the DNA molecule, which suggests possible potential uses for sensing applications.

  20. Strain gradient plasticity effects in whisker-reinforced metals

    DEFF Research Database (Denmark)

    Niordson, Christian Frithiof

    2002-01-01

    A metal reinforced by fibers in the micron range is studied using the strain gradient plasticity theory of Fleck and Hutchinson (2001). Cell-model analyzes are used to study the influence of the material length parameters numerically. Different higher order boundary conditions are considered...... at the fiber-matrix interface. The results are presented as overall stress-strain curves for the whisker-reinforced metal, and also contour plots of effective plastic strain are shown. The strain gradient plasticity theory predicts a significant stiffening effect when compared to conventional models...