WorldWideScience

Sample records for alcohol excise cuts

  1. Do alcohol excise taxes affect traffic accidents? Evidence from Estonia.

    Science.gov (United States)

    Saar, Indrek

    2015-01-01

    This article examines the association between alcohol excise tax rates and alcohol-related traffic accidents in Estonia. Monthly time series of traffic accidents involving drunken motor vehicle drivers from 1998 through 2013 were regressed on real average alcohol excise tax rates while controlling for changes in economic conditions and the traffic environment. Specifically, regression models with autoregressive integrated moving average (ARIMA) errors were estimated in order to deal with serial correlation in residuals. Counterfactual models were also estimated in order to check the robustness of the results, using the level of non-alcohol-related traffic accidents as a dependent variable. A statistically significant (P traffic accidents was disclosed under alternative model specifications. For instance, the regression model with ARIMA (0, 1, 1)(0, 1, 1) errors revealed that a 1-unit increase in the tax rate is associated with a 1.6% decrease in the level of accidents per 100,000 population involving drunk motor vehicle drivers. No similar association was found in the cases of counterfactual models for non-alcohol-related traffic accidents. This article indicates that the level of alcohol-related traffic accidents in Estonia has been affected by changes in real average alcohol excise taxes during the period 1998-2013. Therefore, in addition to other measures, the use of alcohol taxation is warranted as a policy instrument in tackling alcohol-related traffic accidents.

  2. Effect of an excise tax increase on the demand for low alcohol wine

    DEFF Research Database (Denmark)

    Mueller, Simone; Lockshin, Larry; Louviere, Jordan J.

    the per-capita alcohol consumption is 50% higher than the Australian average and likelihood of dying from alcohol is ten times the national rate. As a consequence, a comprehensive review of the Australian tax system has recommended wine to be taxed on a volumetric basis and that all alcoholic beverages...... be taxed to the same extent per litre of alcohol. Even though Australia has somewhat unique circumstances, the quest for moderate alcohol consumption has become of global importance. Reducing or limiting the level of harm from alcohol consumption has been the focus of government intervention, national......Purpose: The study examines the demand for low and very low alcohol wine products under the current Australian volumetric alcohol system and under an increase of excise tax for wine under an alcohol tax equalisation. The penetration and market share of normal strength and low alcohol wine...

  3. Inhibition of excision repair of DNA in u.v.-irradiated Escherichia coli by phenethyl alcohol

    International Nuclear Information System (INIS)

    Tachibana, A.; Yonei, S.

    1985-01-01

    Membrane-specific drugs such as procaine and chlorpromazine have been shown to inhibit excision repair of DNA in u.v.-irradiated E. coli. One possible mechanism is that, if association of DNA with the cell membrane is essential for excision repair, this process may be susceptible to drugs affecting the structure of cell membranes. We examined the effect of phenethyl alcohol, which is a membrane-specific drug and known to dissociate the DNA-membrane complex, on excision repair of DNA in u.v.-irradiated E. coli cells. The cells were irradiated with u.v. light and then held at 30 0 C in buffer (liquid-holding) in the presence or absence of phenethyl alcohol. It was found that phenethyl alcohol inhibits the liquid-holding recovery in both wild-type and recA strains, corresponding to its dissociating action on the DNA-membrane complex. Thus, the association of DNA with cell membrane is an important factor for excision repair in E. coli. Procaine did not show the dissociating effect, suggesting that at least two different mechanisms are responsible for the involvement of cell membrane in excision repair of DNA in E. coli. (author)

  4. Weakening of one more alcohol control pillar: a review of the effects of the alcohol tax cuts in Finland in 2004.

    Science.gov (United States)

    Mäkelä, Pia; Osterberg, Esa

    2009-04-01

    To review the consequences of the changes in Finnish alcohol policy in 2004, when quotas for travellers' tax-free imports of alcoholic beverages from other European Union (EU) countries were abolished, Estonia joined the EU and excise duties on alcoholic beverages were reduced in Finland by one-third, on average. A review of published research and routinely available data. Finland. Prices of alcoholic beverages, recorded and unrecorded alcohol consumption, data on criminality and other police statistics, alcohol-related deaths and hospitalizations, service use. Alcohol consumption increased 10% in 2004, clearly more than in the early 2000s. With few exceptions, alcohol-related harms increased. Alcohol-induced liver disease deaths increased the most, by 46% in 2004-06 compared to 2001-03, which indicates a strong effect on pre-2004 heavy drinkers. Consumption and harms increased most among middle-aged and older segments of the population, and harms in the worst-off parts of the population in particular. Alcohol taxation and alcohol prices affect consumption and related harms, and heavy drinkers are responsive to price. In Finland in 2004, the worst-off parts of the population paid the highest price in terms of health for cuts in alcohol prices. The removal of travellers' import quotas, which was an inherent part of creating the single European market, had serious public health consequences in Finland.

  5. 76 FR 52862 - Time for Payment of Certain Excise Taxes, and Quarterly Excise Tax Payments for Small Alcohol...

    Science.gov (United States)

    2011-08-24

    ... 40 Cigars and cigarettes, Claims, Electronic fund transfers, Excise taxes, Labeling, Packaging and... that are not required to pay taxes through electronic funds transfer (EFT), this first payment period..., Electronic funds transfers, Excise taxes, Exports, Food additives, Fruit juices, Labeling, Liquors, Packaging...

  6. Comparison of Efficacy of Carbon Dioxide (CO2) Laser with Cutting Diathermy in Surgical Excision of Early Carcinoma Tongue.

    Science.gov (United States)

    Rashid, Muhammad; Hashmi, Muhammad Ali; Maqbool, Shahzad; Dastigir, Majid

    2015-10-01

    To compare the efficacy of carbon dioxide (CO(2)) laser with cutting diathermy as a cutting device in surgical excision of early carcinoma tongue. Experimental study. Combined Military Hospital (CMH), Rawalpindi and CMH, Lahore, from July 2008 to July 2011. Twenty two biopsy proven cases of T(1) and early T(2) squamous cell carcinoma of tongue were divided in two equal groups of 11 each labeled as A and B. Tumor was excised by CO(2) laser in group A while cutting diathermy was done in group B. For both groups tumor excision time, per-operative blood loss, postoperative oral swelling and pain was recorded. Excision time of tumor was assessed in minutes and amount of blood loss in milliliters till complete hemostasis after removal of primary tumor. Postoperatively patients were assessed on 12 hourly basis for 48 hours for pain. Pain was analyzed on visual analogue score 1 - 10. Oral swelling was assessed once after 24 hours and labeled as mild, moderate and severe. Independent sample t-test was applied for analysis of excision time, postoperative pain and per-operative blood loss for both groups. Postoperative swelling was analyzed using Fisher's exact test. P-value of < 0.05 was considered significant. The mean age at diagnosis in group A was 49.36 ± 5.27 years, while in group B patients had mean age of 50.73 ± 8.13 years. In group A, 4/11 (36.3%) patients were having tumor stage T(1) while 7/11 (63.6%) had T(2) stage tumor. In group B, 5/11 (45.4%) were having T1 and 6/11 (54.5%) were having stage T(2) tumor. Excision time was significantly shorter for group B (p=0.003), but group A had less postoperative pain (p=0.001), less per-operative blood loss (p=0.001) and less postoperative oral swelling (p=0.021). Early carcinoma tongue is better removed by laser than electrocautery in terms of postoperative morbidity, per-operative blood loss, postoperative pain and oral swelling.

  7. 76 FR 3502 - Time for Payment of Certain Excise Taxes, and Quarterly Excise Tax Payments for Small Alcohol...

    Science.gov (United States)

    2011-01-20

    ..., Surety bonds, Virgin Islands, Warehouses. 27 CFR Part 40 Cigars and cigarettes, Claims, Electronic fund... required to pay taxes through electronic funds transfer (EFT), this first payment period ends on September... Part 19 Caribbean Basin Initiative, Claims, Electronic funds transfers, Excise taxes, Exports, Gasohol...

  8. 76 FR 3584 - Time for Payment of Certain Excise Taxes, and Quarterly Excise Tax Payments for Small Alcohol...

    Science.gov (United States)

    2011-01-20

    ... 40 Cigars and cigarettes, Claims, Electronic fund transfers, Excise taxes, Labeling, Packaging and..., Regulations.gov , we will post, and you may view, copies of this notice, any electronic or mailed comments we... material that we consider unsuitable for posting. You also may view copies of this notice, any electronic...

  9. Effective prevention against risky underage drinking--the need for higher excise taxes on alcoholic beverages in Germany.

    Science.gov (United States)

    Adams, Michael; Effertz, Tobias

    2010-01-01

    The study aimed to explore the place of taxation in preventing underage binge drinking in Germany. We reviewed evidence on the role of excise taxes on alcohol in preventing alcohol problems and underage drinking. We analyzed historical German data on tax on alcoholic beverages and compared this with European data, finally calculating tax scenarios and their impact on underage binge drinking. Germany applies lower taxes than many other European countries and alcohol beverage prices have decreased by 30% relative to overall price levels during the last 40 years. An optimal tax rate for reducing underage drinking would be set between the European average tax rates and Scandinavian tax rate levels.

  10. Differential effects of procaine and phenethyl alcohol on excision repair of DNA in u.v.-irradiated Escherichia coli

    International Nuclear Information System (INIS)

    Tomiyama, H.; Tachibana, A.; Yonei, S.

    1986-01-01

    Experiments were performed to investigate the involvement of the cell membrane in the excision DNA repair process in Escherichia coli. Two membrane-binding drugs, procaine and phenethyl alcohol (PEA), inhibited liquid-holding recovery (LBR) in u.v.-irradiated E. coli wild-type and recA strains. In uvrB and polA strains where, after u.v.-irradiation, LHR was absent the two drugs had no effect. Both drugs markedly reduced the removal of u.v.-induced thymine dimers in the DNA of wild-type cells (H/r30). Analysis by alkaline sucrose gradients revealed that PEA inhibited the incision step in excision repair. In contrast, procaine had no effect on incision but apparently inhibited the late steps in excision repair. PEA dissociated DNA from the cell membrane, whereas procaine did not. The results suggest that the two drugs PEA and procaine inhibit LHR and the excision repair process operating on u.v.-induced damage in E. coli by at least two different mechanisms each of which may involve the cell membrane. (author)

  11. Do excise taxes save lives? The Irish experience with alcohol taxation.

    Science.gov (United States)

    Walsh, B M

    1987-12-01

    This paper studies the effects of changes in the level of indirect taxation of alcoholic beverages on alcohol-related problems. Using time series data for Ireland the following topics are explored: (1) the effect of changes in taxation on the retail price of alcohol; (2) the effect of changes in the retail price on the consumption of alcohol; and (3) the association between changes in alcohol consumption and the incidence of certain alcohol-related problems, such as deaths from liver cirrhosis and fatal road accidents. The evidence is that a relatively small number of alcohol-related deaths would be averted by higher alcohol taxes. The effect of heavier taxation on the distribution of purchasing power is discussed.

  12. Comparison of efficacy of carbon dioxide (CO/sub 2/) laser with cutting diathermy in surgical excision of early carcinoma tongue

    International Nuclear Information System (INIS)

    Rashid, M.; Hashmi, M.A.; Dastigir, M.

    2015-01-01

    To compare the efficacy of carbon dioxide (CO/sub 2/) laser with cutting diathermy as a cutting device in surgical excision of early carcinoma tongue. Study Design: Experimental study. Place and Duration of Study: Combined Military Hospital (CMH), Rawalpindi and CMH, Lahore, from July 2008 to July 2011. Methodology: Twenty two biopsy proven cases of T1 and early T2 squamous cell carcinoma of tongue were divided in two equal groups of 11 each labeled as A and B. Tumor was excised by CO/sub 2/ laser in group A while cutting diathermy was done in group B. For both groups tumor excision time, per-operative blood loss, postoperative oral swelling and pain was recorded. Excision time of tumor was assessed in minutes and amount of blood loss in milliliters till complete hemostasis after removal of primary tumor. Postoperatively patients were assessed on 12 hourly basis for 48 hours for pain. Pain was analyzed on visual analogue score 1 - 10. Oral swelling was assessed once after 24 hours and labeled as mild, moderate and severe. Independent sample t-test was applied for analysis of excision time, postoperative pain and per-operative blood loss for both groups. Postoperative swelling was analyzed using Fisher exact test. P-value of < 0.05 was considered significant. Results: The mean age at diagnosis in group A was 49.36 ± 5.27 years, while in group B patients had mean age of 50.73 ± 8.13 years. In group A, 4/11 (36.3%) patients were having tumor stage T1 while 7/11 (63.6%) had T2 stage tumor. In group B, 5/11 (45.4%) were having T1 and 6/11 (54.5%) were having stage T2 tumor. Excision time was significantly shorter for group B (p=0.003), but group A had less postoperative pain (p=0.001), less per-operative blood loss (p=0.001) and less postoperative oral swelling (p=0.021). Conclusion: Early carcinoma tongue is better removed by laser than electrocautery in terms of postoperative morbidity, per-operative blood loss, postoperative pain and oral swelling. (author)

  13. Cutting

    Science.gov (United States)

    ... Staying Safe Videos for Educators Search English Español Cutting KidsHealth / For Teens / Cutting What's in this article? ... Getting Help Print en español Cortarse What Is Cutting? Emma's mom first noticed the cuts when Emma ...

  14. Excision without excision

    International Nuclear Information System (INIS)

    Brown, David; Sarbach, Olivier; Schnetter, Erik; Diener, Peter; Tiglio, Manuel; Hawke, Ian; Pollney, Denis

    2007-01-01

    to turducken (turduckens, turduckening, turduckened, turduckened) [math.]: To stuff a black hole. We analyze and apply an alternative to black hole excision based on smoothing the interior of black holes with arbitrary initial data, and solving the vacuum Einstein evolution equations everywhere. By deriving the constraint propagation system for our hyperbolic formulation of the BSSN evolution system we rigorously prove that the constraints propagate causally and so any constraint violations introduced inside the black holes cannot affect the exterior spacetime. We present evolutions of Cook-Pfeiffer binary black hole initial configurations showing that these techniques appear to work robustly for generic data. We also present evidence from spherically symmetric evolutions that for the gauge conditions used the same stationary end-state is approached irrespective of the choice of initial data and smoothing procedure

  15. Further Study on the Affordability of Alcoholic Beverages in the EU: A Focus on Excise Duty Pass-Through, On- and Off-Trade Sales, Price Promotions and Statutory Regulations.

    Science.gov (United States)

    Rabinovich, Lila; Hunt, Priscillia; Staetsky, Laura; Goshev, Simo; Nolte, Ellen; Pedersen, Janice S; Tiefensee, Christine

    2012-01-01

    Policies related to alcohol pricing, promotion and discounts provide opportunities to address harms associated with alcohol misuse. However, there are important gaps in information and knowledge about the regulations in place across parts of Europe and their impacts on consumer prices and locations of purchase. Using market data, we explored the overall scale and trend of price promotions and discounts in the off-premise (e.g. supermarket) and on-premise (e.g. restaurants, pubs) across five EU Member States. To better understand the factors that may influence sales in the on- vs. off-premises, we performed regression analysis for four EU Member States with relevant data. This found that increases in broadband penetration and population density were associated with relatively higher levels of off-premise alcohol purchases and that increases in income were associated with relatively higher levels of on-premise purchases of alcohol. There was no statistically significant relationship for female higher education. We further used time-series methods, drawing on data for Ireland, Latvia, Slovenia and Finland, to estimate the impact of changes in excise duty on price ("pass-through"). This showed that a €1 increase in excise duty increased beer prices by €0.50-€2.50 in the off-premise, and increased spirits prices by €0.70-€1.40 in the off-premise. These findings suggest that, depending on the price sensitivity of consumers and other strategies employed by suppliers (e.g. advertising), changes in excise duty may be an effective instrument to reduce harmful alcohol consumption.

  16. Alcohol

    Science.gov (United States)

    ... because that's how many accidents occur. What Is Alcoholism? What can be confusing about alcohol is that ... develop a problem with it. Sometimes, that's called alcoholism (say: al-kuh-HOL - ism) or being an ...

  17. Alcohol

    Science.gov (United States)

    If you are like many Americans, you drink alcohol at least occasionally. For many people, moderate drinking ... risky. Heavy drinking can lead to alcoholism and alcohol abuse, as well as injuries, liver disease, heart ...

  18. Alcohol

    International Nuclear Information System (INIS)

    Navarro Junior, L.

    1988-01-01

    The alcohol production as a secondary energy source, the participation of the alcohol in Brazilian national economic and social aspects are presented. Statistical data of alcohol demand compared with petroleum by-products and electricity are also included. (author)

  19. [Alcohol].

    Science.gov (United States)

    Zima, T

    1996-07-14

    Alcohol is one of the most widely used addictive substances. It can be assumed that everybody encounters alcohol--ethanol in various forms and concentrations in the course of their lives. A global and social problem of our civilization is alcohol consumption which has a rising trend. Since 1989 the consumption of alcoholic beverages is rising and the mean annual consumption of concentrated ethanol per head is cea 10 litres. In ethanol abuse the organism is damaged not only by ethanol alone but in particular by substances formed during its metabolism. Its detailed knowledge is essential for the knowledge and investigations of the metabolic and toxic effect of ethanol on the organism. Ingested alcohol is in 90-98% eliminated from the organism by three known metabolic pathways: 1-alcohol dehydrogenase, 2-the microsomal ethanol oxidizing system and 3-catalase. Alcohol is a frequent important risk factor of serious "diseases of civilization" such as IHD, hypertension, osteoporosis, neoplastic diseases. Cirrhosis of the liver and chronic pancreatitis are the well known diseases associated with alcohol ingestion and also their most frequent cause. It is impossible to list all organs and diseases which develop as a result of alcohol consumption. It is important to realize that regular and "relatively" small amounts in the long run damage the organism and may be even fatal.

  20. A case story, involving the use of maltitol, a sugar alcohol, as a cutting agent in amphetamine and cocaine powders

    DEFF Research Database (Denmark)

    Reitzel, Lotte Ask; Holm, Niels Bjerre; Linnet, Kristian

    2016-01-01

    . The work described covers the part of the case involving the department of forensic chemistry, and not the whole police investigation, but everything was done within the frames given by the police. To the best of our knowledge, this is the first report of a disaccharide polyol being used as a cutting agent...

  1. Alcohol

    Science.gov (United States)

    ... created when grains, fruits, or vegetables are fermented . Fermentation is a process that uses yeast or bacteria to change the sugars in the food into alcohol. Fermentation is used to produce many necessary items — everything ...

  2. Alcohol

    Science.gov (United States)

    ... to do. Wondering if adding a glass of wine or beer might help lower your blood glucose if it is high? The effects of alcohol can be unpredictable and it is not recommended as a treatment for high blood glucose. The risks likely outweigh any benefit that may be seen in blood glucose alone. ...

  3. Arthroscopic excision of ganglion cysts.

    Science.gov (United States)

    Bontempo, Nicholas A; Weiss, Arnold-Peter C

    2014-02-01

    Arthroscopy is an advancing field in orthopedics, the applications of which have been expanding over time. Traditionally, excision of ganglion cysts has been done in an open fashion. However, more recently, studies show outcomes following arthroscopic excision to be as good as open excision. Cosmetically, the incisions are smaller and heal faster following arthroscopy. In addition, there is the suggested benefit that patients will regain function and return to work faster following arthroscopic excision. More prospective studies comparing open and arthroscopic excision of ganglion cysts need to be done in order to delineate if there is a true functional benefit. Copyright © 2014 Elsevier Inc. All rights reserved.

  4. Alcohol and illicit drugs in drivers involved in road traffic crashes in the Milan area. A comparison with normal traffic reveals the possible inadequacy of current cut-off limits.

    Science.gov (United States)

    Ferrari, Davide; Manca, Monica; Banfi, Giuseppe; Locatelli, Massimo

    2018-01-01

    Driving under the influence of alcohol and/or illicit drugs in Italy is regulated by the articles 186 and 187 of the National Street Code. Epidemiological studies on drivers involved in road traffic crashes (RTC) provide useful information about the use/abuse of these substances in the general population. Comparison with case control studies may reveal important information like the cut-off limits adequacy. Data from 1587 blood tests for alcohol and 1258 blood tests for illicit drugs on drivers involved in RTC around Milan between 2012 and 2016, were analyzed and compared with a published random survey (DRUID) from the European Community. Our data from RTC-involved drivers show that alcohol abuse is not age-related whereas illicit drugs are more common in young people. Cannabinoids are frequent among younger drivers (median age 27) whereas cocaine is more often detected in adults (median age 34). The calculated odds ratio after comparison with the DRUID survey shows that a blood alcohol concentration below the legal limit does not represent a risk factor in having a car accident whereas concentrations of cocaine and cannabinoids within the legal limits are associated with being involved in a car accident. Despite authority efforts, the abuse of alcohol and illicit drugs is still common in young drivers. We suspect that the cut-off limits for cannabinoids and cocaine and/or the pre-analytical procedures for these substances are inadequate. We suggest a better standardization of the procedure by shortening the time interval between the request for investigation and blood collection and propose the adoption of more stringent cut-off limits. Copyright © 2017 Elsevier B.V. All rights reserved.

  5. 26 CFR 48.4041-18 - Fuels containing alcohol.

    Science.gov (United States)

    2010-04-01

    ... 26 Internal Revenue 16 2010-04-01 2010-04-01 true Fuels containing alcohol. 48.4041-18 Section 48... EXCISE TAXES MANUFACTURERS AND RETAILERS EXCISE TAXES Special Fuels § 48.4041-18 Fuels containing alcohol..., of any liquid fuel described in section 4041(a) (1) or (2) which consists of at least 10% alcohol by...

  6. Two cases of methyl alcohol intoxication by sub-chronic inhalation and dermal exposure during aluminum CNC cutting in a small-sized subcontracted factory.

    Science.gov (United States)

    Ryu, Jia; Lim, Key Hwan; Ryu, Dong-Ryeol; Lee, Hyang Woon; Yun, Ji Young; Kim, Seoung-Wook; Kim, Ji-Hoon; Jung-Choi, Kyunghee; Kim, Hyunjoo

    2016-01-01

    Methyl alcohol poisoning has been mainly reported in community. Two cases of methyl alcohol poisoning occurred in a small-sized subcontracted factory which manufactured smartphone parts in Korea. One young female patient presented with dyspnea and visual disturbance. Another young male patient presented with visual disturbance and myalgia. They treated with sodium bicarbonate infusion and hemodialysis for metabolic acidosis. In addition, he received ethyl alcohol per oral treatment. Her and his urinary methyl alcohol concentration was detected as 7.632 mg/L, 46.8 mg/L, respectively, although they were treated hemodialysis. Results of the working environment measurement showed that the concentration of methyl alcohol (1030.1-2220.5 ppm) in the air exceeded the time weighted average (200 ppm). They were diagnosed with optic neuropathy due to methyl alcohol poisoning and still have visual impairment. Workers who hired as dispatched employees in a small-sized subcontracted factory were exposed to high concentrations of methyl alcohol. The workplace had poor ventilation system. In addition, workers did not wear proper personal protect equipment. Working environment measurement and annual chekups for workers were not performed. They were in a blind spot to occupational safety and health. More attention is needed to protect vulnerable workers' health.

  7. Cutting cleaner

    International Nuclear Information System (INIS)

    Elsen, R.P.H. van; Smits, M.

    1991-01-01

    This paper presents the results of a long term field test of the Cutting Cleaner, which is used for the treatment of wet oil contaminated cuttings (WOCC) produced when drilling with Oil Based Mud (OBM). It was concluded that it is possible to reduce the oil content of cuttings to an average of 1 - 2%. The recovered base oil can be reused to make new oil based mud

  8. Nucleotide excision repair in yeast

    NARCIS (Netherlands)

    Eijk, Patrick van

    2012-01-01

    Nucleotide Excision Repair (NER) is a conserved DNA repair pathway capable of removing a broad spectrum of DNA damage. In human cells a defect in NER leads to the disorder Xeroderma pigmentosum (XP). The yeast Saccharomyces cerevisiae is an excellent model organism to study the mechanism of NER. The

  9. Paper Cuts.

    Science.gov (United States)

    Greene, Lisa A.

    1990-01-01

    Describes how to create paper cuts and suggests the most appropriate materials for young children that give good quality results. Describes the methods the author, a professional artist, uses to assemble her own paper cuts and how these can be adopted by older students. (KM)

  10. Wet cutting

    Energy Technology Data Exchange (ETDEWEB)

    Hole, B. [IMC Technical Services (United Kingdom)

    1999-08-01

    Continuous miners create dust and methane problems in underground coal mining. Control has usually been achieved using ventilation techniques as experiments with water based suppression have led to flooding and electrical problems. Recent experience in the US has led to renewed interest in wet head systems. This paper describes tests of the Hydraphase system by IMC Technologies. Ventilation around the cutting zone, quenching of hot ignition sources, dust suppression, the surface trial gallery tests, the performance of the cutting bed, and flow of air and methane around the cutting head are reviewed. 1 ref., 2 figs., 2 photos.

  11. Cutting assembly

    Science.gov (United States)

    Racki, Daniel J.; Swenson, Clark E.; Bencloski, William A.; Wineman, Arthur L.

    1984-01-01

    A cutting apparatus includes a support table mounted for movement toward and away from a workpiece and carrying a mirror which directs a cutting laser beam onto the workpiece. A carrier is rotatably and pivotally mounted on the support table between the mirror and workpiece and supports a conduit discharging gas toward the point of impingement of the laser beam on the workpiece. Means are provided for rotating the carrier relative to the support table to place the gas discharging conduit in the proper positions for cuts made in different directions on the workpiece.

  12. Lumbar disc excision through fenestration

    Directory of Open Access Journals (Sweden)

    Sangwan S

    2006-01-01

    Full Text Available Background : Lumbar disc herniation often causes sciatica. Many different techniques have been advocated with the aim of least possible damage to other structures while dealing with prolapsed disc surgically in the properly selected and indicated cases. Methods : Twenty six patients with clinical symptoms and signs of prolapsed lumbar intervertebral disc having radiological correlation by MRI study were subjected to disc excision by interlaminar fenestration method. Results : The assessment at follow-up showed excellent results in 17 patients, good in 6 patients, fair in 2 patients and poor in 1 patient. The mean preoperative and postoperative Visual Analogue Scores were 9.34 ±0.84 and 2.19 ±0.84 on scale of 0-10 respectively. These were statistically significant (p value< 0.001, paired t test. No significant complications were recorded. Conclusion : Procedures of interlaminar fenestration and open disc excision under direct vision offers sufficient adequate exposure for lumbar disc excision with a smaller incision, lesser morbidity, shorter convalescence, early return to work and comparable overall results in the centers where recent laser and endoscopy facilities are not available.

  13. Jasmonates act positively in adventitious root formation in petunia cuttings

    OpenAIRE

    Lischweski, Sandra; Muchow, Anne; Guthörl, Daniela; Hause, Bettina

    2015-01-01

    Background Petunia is a model to study the process of adventitious root (AR) formation on leafy cuttings. Excision of cuttings leads to a transient increase in jasmonates, which is regarded as an early, transient and critical event for rooting. Here, the role of jasmonates in AR formation on petunia cuttings has been studied by a reverse genetic approach. Results To reduce the endogenous levels of jasmonates, transgenic plants were generated expressing a Petunia hybrida ALLENE OXIDE CYCLASE (...

  14. Cutting Cosmos

    DEFF Research Database (Denmark)

    Mikkelsen, Henrik Hvenegaard

    For the first time in over 30 years, a new ethnographic study emerges on the Bugkalot tribe, more widely known as the Ilongot of the northern Philippines. Exploring the notion of masculinity among the Bugkalot, Cutting Cosmos is not only an experimental, anthropological study of the paradoxes...... around which Bugkalot society revolves, but also a reflection on anthropological theory and writing. Focusing on the transgressive acts through which masculinity is performed, this book explores the idea of the cosmic cut, the ritual act that enables the Bugkalot man to momentarily hold still the chaotic...

  15. Alcoholism and Alcohol Abuse

    Science.gov (United States)

    ... their drinking causes distress and harm. It includes alcoholism and alcohol abuse. Alcoholism, or alcohol dependence, is a disease that causes ... the liver, brain, and other organs. Drinking during pregnancy can harm your baby. Alcohol also increases the ...

  16. Decline in alcohol consumption in Estonia: combined effects of strengthened alcohol policy and economic downturn.

    Science.gov (United States)

    Lai, Taavi; Habicht, Jarno

    2011-01-01

    To describe alcohol policy changes in parallel to consumption changes in 2005-2010 in Estonia, where alcohol consumption is among the highest in Europe. Review of pertinent legislation and literature. Alcohol consumption decreased since 2008, while alcohol excise tax, sales time restrictions and ad bans have increased since 2005. An economic downturn started in 2008. The precise roles of policy changes and the economic downturn in the decline of alcohol consumption, and whether the decrease will be sustained, are still unclear.

  17. Cutting Itch

    OpenAIRE

    Zellweger, Christoph

    2015-01-01

    Cutting Itch” is a curatorial project by artists-duo Baltensperger-Siepert. An exhibition project about the essential need of art to be an active system that reflects, investigates social, cultural and political issues. It is about an existential necessity to shape ones environment, to think about relations, regulating structures and about how we can locate ourselves in a more and more globalised world. (from press material). \\ud \\ud Baltensperger & Siepert identified seven artists from Mexi...

  18. Mitochondrial base excision repair assays

    DEFF Research Database (Denmark)

    Maynard, Scott; de Souza-Pinto, Nadja C; Scheibye-Knudsen, Morten

    2010-01-01

    The main source of mitochondrial DNA (mtDNA) damage is reactive oxygen species (ROS) generated during normal cellular metabolism. The main mtDNA lesions generated by ROS are base modifications, such as the ubiquitous 8-oxoguanine (8-oxoG) lesion; however, base loss and strand breaks may also occur....... Many human diseases are associated with mtDNA mutations and thus maintaining mtDNA integrity is critical. All of these lesions are repaired primarily by the base excision repair (BER) pathway. It is now known that mammalian mitochondria have BER, which, similarly to nuclear BER, is catalyzed by DNA...... glycosylases, AP endonuclease, DNA polymerase (POLgamma in mitochondria) and DNA ligase. This article outlines procedures for measuring oxidative damage formation and BER in mitochondria, including isolation of mitochondria from tissues and cells, protocols for measuring BER enzyme activities, gene...

  19. Framing the policy debate over spirits excise tax in Poland.

    Science.gov (United States)

    Zatonski, Mateusz; Hawkins, Benjamin; McKee, Martin

    2018-06-01

    Industry lobbying remains an obstacle to effective health-oriented alcohol policy. In 2013, an increase in excise tax on spirits was announced by the Polish government. This article presents a qualitative analysis of the public debate that ensued on the potential economic, health and social effects of the policy. It focuses on how competing groups, including industry actors, framed their position and sought to dominate the debate. Online archives of five Polish national newspapers, two spirits trade associations, and parliamentary and ministerial archives were searched. A thematic content analysis of the identified sources was conducted. The overall findings were compared with existing research on the framing of the Minimum Unit Pricing (MUP) debate in the UK. A total of 155 sources were analysed. Two main frames were identified: health, and economic. The spirits industry successfully promoted the economic frame in their own publications and in the media. The debate was dominated by arguments about potential growth of the grey market and losses in tax revenue that might result from the excise tax increase. The framing of the debate in Poland differed from the framing of the MUP debate in the United Kingdom. The Polish public health community was unsuccessful in making health considerations a significant element of the alcohol policy debate. The strategies pursued by UK health advocates offer lessons for how to make a more substantial impact on media coverage and promote health-oriented legislation.

  20. Feasibility study of transanal total mesorectal excision

    NARCIS (Netherlands)

    Velthuis, S.; Boezem, P.B. van den; Peet, D.L. van der; Cuesta, M.A.; Sietses, C.

    2013-01-01

    BACKGROUND: Laparoscopic resection of colorectal cancers is a safe alternative to open surgery. The conversion rate to open surgery remains fairly constant but is associated with increased morbidity. A new approach to the surgical excision of rectal cancer is transanal total mesorectal excision

  1. Alcohol Alert

    Science.gov (United States)

    ... of Alcohol Consumption Alcohol's Effects on the Body Alcohol Use Disorder Fetal Alcohol Exposure Support & Treatment Alcohol Policy Special ... 466 KB] No. 81: Exploring Treatment Options for Alcohol Use Disorders [ PDF - 539K] No. 80: Alcohol and HIV/AIDS: ...

  2. Nucleotide excision repair in the test tube.

    NARCIS (Netherlands)

    N.G.J. Jaspers (Nicolaas); J.H.J. Hoeijmakers (Jan)

    1995-01-01

    textabstractThe eukaryotic nucleotide excision-repair pathway has been reconstituted in vitro, an achievement that should hasten the full enzymological characterization of this highly complex DNA-repair pathway.

  3. Employment impacts of alcohol taxes.

    Science.gov (United States)

    Wada, Roy; Chaloupka, Frank J; Powell, Lisa M; Jernigan, David H

    2017-12-01

    There is strong scientific evidence supporting the effectiveness of increasing alcohol taxes for reducing excessive alcohol consumption and related problems. Opponents have argued that alcohol tax increases lead to job losses. However, there has been no comprehensive economic analysis of the impact of alcohol taxes on employment. To fill this gap, a regional macroeconomic simulation model was used to assess the net impact of two hypothetical alcohol tax increases (a 5-cent per drink excise tax increase and a 5% sales tax increase on beer, wine, and distilled spirits, respectively) on employment in Arkansas, Florida, Massachusetts, New Mexico, and Wisconsin. The model accounted for changes in alcohol demand, average state income, and substitution effects. The employment impact of spending the new tax revenue on general expenditures versus health care was also assessed. Simulation results showed that a 5-cent per drink additional excise tax on alcoholic beverages with new tax revenues allocated to general expenditures increased net employment in Arkansas (802 jobs); Florida (4583 jobs); Massachusetts (978 jobs); New Mexico (653 jobs); and Wisconsin (1167 jobs). A 5% additional sales tax also increased employment in Arkansas (789 jobs; Florida (4493 jobs); Massachusetts (898 jobs); New Mexico (621 jobs); and Wisconsin (991 jobs). Using new alcohol tax revenues to fund health care services resulted in slightly lower net increases in state employment. The overall economic impact of alcohol tax increases cannot be fully assessed without accounting for the job gains resulting from additional tax revenues. Copyright © 2017 Elsevier Inc. All rights reserved.

  4. Studying Alcohol Pricing and Taxation Policies in India | IDRC ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    The research team will study trends in alcohol taxation and pricing policies across 10 ... Sample Survey Office of India and the 10 state excise tax departments. ... International Water Resources Association, in close collaboration with IDRC, ...

  5. Plasma arc cutting: speed and cut quality

    International Nuclear Information System (INIS)

    Nemchinsky, V A; Severance, W S

    2009-01-01

    When cutting metal with plasma arc cutting, the walls of the cut are narrower at the bottom than at the top. This lack of squareness increases as the cutting speed increases. A model of this phenomenon, affecting cut quality, is suggested. A thin liquid layer, which separates the plasma from the solid metal to be melted, plays a key role in the suggested model. This layer decreases heat transfer from the plasma to the solid metal; the decrease is more pronounced the higher the speed and the thicker the liquid metal layer. Since the layer is thicker at the bottom of the cut, the heat transfer effectiveness is lower at the bottom. The decrease in heat transfer effectiveness is compensated by the narrowness of the cut. The suggested model allows one to calculate the profile of the cut. The result of the calculations of the cutting speeds for plates of various thicknesses, at which the squareness of the cut is acceptable, agrees well with the speeds recommended by manufacturers. The second effect considered in the paper is the deflection of the plasma jet from the vertical at a high cutting speed. A qualitative explanation of this phenomenon is given. We believe the considerations of this paper are pertinent to other types of cutting with moving heat sources.

  6. Ulnar nerve entrapment complicating radial head excision

    Directory of Open Access Journals (Sweden)

    Kevin Parfait Bienvenu Bouhelo-Pam

    Full Text Available Introduction: Several mechanisms are involved in ischemia or mechanical compression of ulnar nerve at the elbow. Presentation of case: We hereby present the case of a road accident victim, who received a radial head excision for an isolated fracture of the radial head and complicated by onset of cubital tunnel syndrome. This outcome could be the consequence of an iatrogenic valgus of the elbow due to excision of the radial head. Hitherto the surgical treatment of choice it is gradually been abandoned due to development of radial head implant arthroplasty. However, this management option is still being performed in some rural centers with low resources. Discussion: The radial head plays an important role in the stability of the elbow and his iatrogenic deformity can be complicated by cubital tunnel syndrome. Conclusion: An ulnar nerve release was performed with favorable outcome. Keywords: Cubital tunnel syndrome, Peripheral nerve palsy, Radial head excision, Elbow valgus

  7. Elliptical excisions: variations and the eccentric parallelogram.

    Science.gov (United States)

    Goldberg, Leonard H; Alam, Murad

    2004-02-01

    The elliptical (fusiform) excision is a basic tool of cutaneous surgery. To assess the design, functionality, ease of construction, and aesthetic outcomes of the ellipse. A systematic review of elliptical designs and their site-specific benefits and limitations. In particular, we consider the (1). context of prevailing relaxed skin tension lines and tissue laxity; and (2). removal of the smallest possible amount of tissue around the lesion and in the "dog-ears." Attention is focused on intuitive methods that can be reproducibly planned and executed. Elliptical variations are easily designed and can be adapted to many situations. The eccentric parallelogram excision is offered as a new technique that minimizes notching and focal tension in the center of an elliptical closure. Conclusion The elliptical (fusiform) excision is an efficient, elegant, and versatile technique that will remain a mainstay of the cutaneous surgical armamentarium.

  8. Porfiria cutánea tarda: asociación con mutaciones HFE, hepatitis virales, alcohol y otros factores de riesgo en Guipúzcoa, País Vasco Porphyria cutanea tarda: An analysis of HFE gene mutations, hepatitis viruses, alcohol intake, and other risk factors in 54 patients from Guipúzcoa, Basque Country, Spain

    Directory of Open Access Journals (Sweden)

    A. Castiella

    2008-12-01

    Full Text Available Objetivo: estudiar la frecuencia de las mutaciones en el gen HFE (C282Y, H63D, S65C en un grupo de 54 pacientes con porfiria cutánea tarda (PCT y en un grupo de controles sanos (donantes de sangre en Guipúzcoa. También analizar su relación con los virus de la hepatitis B y C (VHB, VHC, alcohol y otros factores de riesgo reconocidos. Métodos: el análisis de las mutaciones se hizo mediante PCR. Se compararon las frecuencias alélicas y genotípicas. Se determinaron la probabilidad y el test de Chi cuadrado. Resultados: no encontramos asociación entre C282Y y PCT (5,76 vs. 5% controles. Se observó una alta frecuencia alélica en la mutación H63D en PCT (34,25%, pero sin ser estadísticamente significativa (controles 29,31%, debido a la alta prevalencia de esta mutación en la población vasca. La mutación S65C fue menor en PCT que en controles. Encontramos una idéntica presencia de H63D en heterocigosis en ambos grupos (38,8 vs. 38,8%. La asociación con el VHC se objetivó en el 35,18% de los pacientes y la infección por VHB en el 7,4%. Un 55,55% de los pacientes tenía un hábito alcohólico de más de 60 g etanol día. Todos eran negativos para el virus de la inmunodeficiencia humana (VIH y 1 de las 5 mujeres con PCT tomaba estrógenos. Conclusión: las mutaciones C282Y y H63D no tienen un papel relevante en los pacientes con PCT en Guipúzcoa. Los factores externos (consumo importante de alcohol y VHC parecen jugar un papel fundamental en el desarrollo de la PCT en nuestra población.Aim: to study the frequency of HFE gene mutations (C282Y, H63D, S65C in a group of 54 sporadic PCT patients and in a group of healthy controls (blood donors from Guipúzcoa, Spain. We studied the association of PCT with HCV, HBV, alcohol abuse, and other established risk factors. Methods: the analysis of mutations was made by PCR. Allelic and genotypic frequencies were compared. Probability was determined and a Chi-squared test was performed. Results

  9. Robotic Extramucosal Excision of Bladder Wall Leiomyoma

    Directory of Open Access Journals (Sweden)

    Khalid E. Al-Othman

    2014-01-01

    Full Text Available Introduction: Multiple case reports and reviews have been described in the literature for bladder wall leiomyoma resection via different approaches. The minimally invasive partial cystectomy remains the most widely accepted technique; however, case reports for enucleation of bladder wall leiomyoma have also been described. The purpose of this video is to demonstrate the robotic extramucosal excision of a bladder wall leiomyoma, without cystotomy, but with complete removal of the muscular layer. Materials and Methods: A 35-year old male present with lower urinary tract symptoms and imaging showed bladder wall mass with histopathology showed leiomyoma. The patient consented for mass excision with the possibility of a partial cystectomy. The patient was placed in the supine, 30-degree Trendelenburg position during the procedure. A total of 4 ports were inserted. A 3-arm da Vinci robotic surgical system was docked, and the arms were connected. Extramucosal excision was accomplished without cystotomy and muscle approximation was achieved by 2 0 Vicryle. Result: The operative time was 90 minutes, blood loss of approximately 50mL and the patient was discharged after 72 hours with no immediate complications and a 6 months follow-up showed no recurrence. Conclusion: Such a technique results in complete excision of the tumor, without cystotomy, and also maintains an intact mucosa. These steps, in addition to decreasing the risk of local recurrence, also shorten the period of postoperative catheterization and hospitalization.

  10. Base excision repair, aging and health span

    Czech Academy of Sciences Publication Activity Database

    Xu, G.; Herzig, M.; Rotrekl, Vladimír; Walter, Ch. A.

    2008-01-01

    Roč. 129, 7-8 (2008), s. 366-382 ISSN 0047-6374 Institutional research plan: CEZ:AV0Z50390512 Keywords : base excision repair * aging * DNA damage Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 3.915, year: 2008

  11. Uracil Excision for Assembly of Complex Pathways

    DEFF Research Database (Denmark)

    Cavaleiro, Mafalda; Nielsen, Morten Thrane; Kim, Se Hyeuk

    2015-01-01

    Despite decreasing prices on synthetic DNA constructs, higher-order assembly of PCR-generated DNA continues to be an important exercise in molecular and synthetic biology. Simplicity and robustness are attractive features met by the uracil excision DNA assembly method, which is one of the most in...

  12. Multibeam Fibre Laser Cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    The appearance of the high power high brilliance fibre laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating cutting laser, the CO2-laser. However, quality problems in fibre......-laser cutting have until now limited its application in metal cutting. In this paper the first results of proof-of-principle studies applying a new approach (patent pending) for laser cutting with high brightness short wavelength lasers will be presented. In the approach, multi beam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from 2 single mode fibre lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W of single...

  13. Multibeam fiber laser cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove; Hansen, Klaus Schütt; Nielsen, Jakob Skov

    2009-01-01

    The appearance of the high power high brilliance fiber laser has opened for new possibilities in laser materials processing. In laser cutting this laser has demonstrated high cutting performance compared to the dominating Cutting laser, the CO2 laser. However, quality problems in fiber......-laser cutting have until now limited its application to metal cutting. In this paper the first results of proof-of-principle Studies applying a new approach (patent pending) for laser cutting with high brightness and short wavelength lasers will be presented. In the approach, multibeam patterns are applied...... to control the melt flow out of the cut kerf resulting in improved cut quality in metal cutting. The beam patterns in this study are created by splitting up beams from two single mode fiber lasers and combining these beams into a pattern in the cut kerf. The results are obtained with a total of 550 W...

  14. Cutting state identification

    International Nuclear Information System (INIS)

    Berger, B.S.; Minis, I.; Rokni, M.

    1997-01-01

    Cutting states associated with the orthogonal cutting of stiff cylinders are identified through an analysis of the singular values of a Toeplitz matrix of third order cumulants of acceleration measurements. The ratio of the two pairs of largest singular values is shown to differentiate between light cutting, medium cutting, pre-chatter and chatter states. Sequences of cutting experiments were performed in which either depth of cut or turning frequency was varied. Two sequences of experiments with variable turning frequency and five with variable depth of cut, 42 cutting experiments in all, provided a database for the calculation of third order cumulants. Ratios of singular values of cumulant matrices find application in the analysis of control of orthogonal cutting

  15. Flexible Laser Metal Cutting

    DEFF Research Database (Denmark)

    Villumsen, Sigurd; Jørgensen, Steffen Nordahl; Kristiansen, Morten

    2014-01-01

    This paper describes a new flexible and fast approach to laser cutting called ROBOCUT. Combined with CAD/CAM technology, laser cutting of metal provides the flexibility to perform one-of-a-kind cutting and hereby realises mass production of customised products. Today’s laser cutting techniques...... possess, despite their wide use in industry, limitations regarding speed and geometry. Research trends point towards remote laser cutting techniques which can improve speed and geometrical freedom and hereby the competitiveness of laser cutting compared to fixed-tool-based cutting technology...... such as punching. This paper presents the concepts and preliminary test results of the ROBOCUT laser cutting technology, a technology which potentially can revolutionise laser cutting....

  16. Circumareolar Incision‑subdermal Tunneling Dissection for Excision ...

    African Journals Online (AJOL)

    2017 Nigerian Journal of Surgery | Published by Wolters Kluwer - Medknow. Excision of ... This is a report of excision of MF in multiple quadrants of the breast using a ... Agodirin, et al. .... the breast: The Ribeiro technique modified by Rezai.

  17. Alcohol and pregnancy

    Directory of Open Access Journals (Sweden)

    Anna Maria Paoletti

    2013-06-01

    Full Text Available Alcohol exerts teratogenic effects in all the gestation times, with peculiar features in relationship to the trimester of pregnancy in which alcohol is assumed. Alcohol itself and its metabolites modify DNA synthesis, cellular division, cellular migration and the fetal development. The characteristic facies of feto-alcoholic syndrome (FAS-affected baby depends on the alcohol impact on skull facial development during the first trimester of pregnancy. In association there are cerebral damages with a strong defect of brain development up to the life incompatibility. Serious consequences on fetal health also depends on dangerous effects of alcohol exposure in the organogenesis of the heart, the bone, the kidney, sensorial organs, et al. It has been demonstrated that maternal binge drinking is a high factor risk of mental retardation and of delinquent behaviour. Unfortunately, a lower alcohol intake also exerts deleterious effects on fetal health. In several countries of the world there is a high alcohol use, and this habit is increased in the women. Therefore, correct information has to be given to avoid alcohol use by women in the preconceptional time and during the pregnancy. Preliminary results of a study performed by the authors show that over 80% of pregnant and puerperal women are not unaware that more than 2 glasses of alcohol/week ingested during pregnancy can create neurological abnormalities in the fetus. However, after the information provided on alcoholic fetopathy, all women are conscious of the damage caused by the use of alcohol to the fetus during pregnancy. This study confirms the need to provide detailed information on the negative effects of alcohol on fetal health. Proceedings of the 9th International Workshop on Neonatology · Cagliari (Italy · October 23rd-26th, 2013 · Learned lessons, changing practice and cutting-edge research

  18. 29 CFR 779.264 - Excise taxes separately stated.

    Science.gov (United States)

    2010-07-01

    ... AS APPLIED TO RETAILERS OF GOODS OR SERVICES Employment to Which the Act May Apply; Enterprise Coverage Excise Taxes § 779.264 Excise taxes separately stated. A tax is separately stated where it clearly... 29 Labor 3 2010-07-01 2010-07-01 false Excise taxes separately stated. 779.264 Section 779.264...

  19. 75 FR 9359 - Drawback of Internal Revenue Excise Tax

    Science.gov (United States)

    2010-03-02

    ... Drawback of Internal Revenue Excise Tax AGENCY: Customs and Border Protection, Department of Homeland... substitution drawback claim for internal revenue excise tax paid on imported merchandise in situations where no excise tax was paid upon the substituted merchandise or where the substituted merchandise is the subject...

  20. Histone displacement during nucleotide excision repair

    DEFF Research Database (Denmark)

    Dinant, C.; Bartek, J.; Bekker-Jensen, S.

    2012-01-01

    Nucleotide excision repair (NER) is an important DNA repair mechanism required for cellular resistance against UV light and toxic chemicals such as those found in tobacco smoke. In living cells, NER efficiently detects and removes DNA lesions within the large nuclear macromolecular complex called...... of histone variants and histone displacement (including nucleosome sliding). Here we review current knowledge, and speculate about current unknowns, regarding those chromatin remodeling activities that physically displace histones before, during and after NER....

  1. Symptomatic pancreatic heterotopia treated by local excision.

    Science.gov (United States)

    De Friend, D J; Saa-Gandi, F W; Humphrey, C S; Foster, D N

    1991-01-01

    Non-ulcer dyspepsia is a continuing problem and in many cases a precise cause is never identified. We present five patients with an allegedly uncommon condition--pancreatic heterotopia. They were managed by local excision of the tumour and after a mean (range) follow up of 42 (9-80) months all remain free of the original symptoms. Images Figure 1 Figure 2 PMID:2013433

  2. Relativistic hydrodynamic evolutions with black hole excision

    International Nuclear Information System (INIS)

    Duez, Matthew D.; Shapiro, Stuart L.; Yo, H.-J.

    2004-01-01

    We present a numerical code designed to study astrophysical phenomena involving dynamical spacetimes containing black holes in the presence of relativistic hydrodynamic matter. We present evolutions of the collapse of a fluid star from the onset of collapse to the settling of the resulting black hole to a final stationary state. In order to evolve stably after the black hole forms, we excise a region inside the hole before a singularity is encountered. This excision region is introduced after the appearance of an apparent horizon, but while a significant amount of matter remains outside the hole. We test our code by evolving accurately a vacuum Schwarzschild black hole, a relativistic Bondi accretion flow onto a black hole, Oppenheimer-Snyder dust collapse, and the collapse of nonrotating and rotating stars. These systems are tracked reliably for hundreds of M following excision, where M is the mass of the black hole. We perform these tests both in axisymmetry and in full 3+1 dimensions. We then apply our code to study the effect of the stellar spin parameter J/M 2 on the final outcome of gravitational collapse of rapidly rotating n=1 polytropes. We find that a black hole forms only if J/M 2 2 >1, the collapsing star forms a torus which fragments into nonaxisymmetric clumps, capable of generating appreciable 'splash' gravitational radiation

  3. Pisiform excision for pisotriquetral instability and arthritis.

    Science.gov (United States)

    Campion, Heather; Goad, Andrea; Rayan, Ghazi; Porembski, Margaret

    2014-07-01

    To evaluate wrist strength and kinematics after pisiform excision and preservation of its soft tissue confluence for pisotriquetral instability and arthritis. We evaluated 12 patients, (14 wrists) subjectively and objectively an average of 7.5 years after pisiform excision. Three additional patients were interviewed by phone. Subjective evaluation included inquiry about pain and satisfaction with the treatment. Objective testing included measuring wrist flexion and extension range of motion, grip strength, and static and dynamic flexion and ulnar deviation strengths of the operative hand compared with the nonsurgical normal hand. Four patients had concomitant ulnar nerve decompression at the wrist. All patients were satisfied with the outcome. Wrist flexion averaged 99% and wrist extension averaged 95% of the nonsurgical hand. Mean grip strength of the operative hand was 90% of the nonsurgical hand. Mean static flexion strength of the operative hand was 94% of the nonsurgical hand, whereas mean dynamic flexion strength was 113%. Mean static ulnar deviation strength of the operative hand was 87% of the nonsurgical hand. The mean dynamic ulnar deviation strength of the operative hand was 103% of the nonsurgical hand. Soft tissue confluence-preserving pisiform excision relieved pain and retained wrist motion and static and dynamic strength. Associated ulnar nerve compression was a confounding factor that may have affected outcomes. Therapeutic IV. Copyright © 2014 American Society for Surgery of the Hand. Published by Elsevier Inc. All rights reserved.

  4. Transvaginal sling excision: tips and tricks.

    Science.gov (United States)

    Clifton, Marisa M; Goldman, Howard B

    2017-01-01

    Complications of synthetic midurethral sling surgery include bladder outlet obstruction, mesh extrusion, and vaginal pain. A treatment of these complications is transvaginal mesh removal. The objectives of this video are to present cases of complications after sling placement and describe techniques to help with successful sling removal. Three patients are presented in this video. One experienced urinary hesitancy and was found to have bladder outlet obstruction on urodynamic study. The second patient presented to the clinic with diminished force of stream and significant dyspareunia. The last patient presented with mesh extrusion. After discussion of management options, all three patients wished to pursue transvaginal sling excision. All patients had successful removal of a portion of their synthetic midurethral sling. This video presents techniques to aide with dissection, mesh excision and prevention of further mesh complications. These include using an individualized surgical technique based on patient presentation and surgeon expertise, planning surgical incisions based on where mesh can be identified or palpated, using a cystoscope sheath or urethral dilator to identify any bladder outlet obstruction, and using a knife blade to identify mesh from surrounding tissue. Sling excision can be successfully performed with careful surgical technique and dissection.

  5. DNA repair capacity and rate of excision repair in UV-irradiated mammalian cells

    International Nuclear Information System (INIS)

    Inoue, Masao; Takebe, Hiraku.

    1978-01-01

    Repair capacities of five mammalian cell strains were measured by colony-forming ability, HCR of UV-irradiated virus, UDS, pyrimidine dimer excision, and semi-conservative DNA replication. Colony-forming ability of UV-irradiated cells was high for human amnion FL cells and mouse L cells, slightly low for African green monkey CV-1 cells, and extremely low for xeroderma pigmentosum cells. HCR of UV-irradiated Herpes simplex virus was high in CV-1 cells, FL and normal human fibroblast cells, low in both XP and L cells. The amount of UDS was high in FL and normal human fibroblast cells, considerably low in CV-1 cells, and essentially no UDS was observed in XP cells. Rate of UDS after UV-irradiation was slower for CV-1 cells than FL and human fibroblast cells. Rate of the excision of thymine-containing dimers from the acid-insoluble fraction during post-irradiation incubation of the cells was rapid in FL and normal human cells and slow in CV-1 cells, and no excision took place in XP cells. Semi-conservative DNA synthesis was reduced after UV-irradiation in all cell lines, but subsequently recovered in FL, normal human and CV-1 cells. The onset of recovery was 4 h after UV-irradiation for FL and normal human cells, but about 6 h for CV-1 cells. The apparent intermediate repair of CV-1 cells except for HCR may be related to the slow rate of excision repair. ''Patch and cut'' model is more favorable than ''cut and patch'' model to elucidate these results. (auth.)

  6. Alcohol Control and Harm Reduction Policies in Lebanon | CRDI ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Currently alcohol prices are low (with very low excise taxes) and illegal sales to minors are high. This research project aims to generate ... The results should help to identify an optimum policy approach most likely to influence alcohol consumption behaviours among youth. Project findings will be publicly shared, with the ...

  7. Welding and cutting

    International Nuclear Information System (INIS)

    Drews, P.; Schulze Frielinghaus, W.

    1978-01-01

    This is a survey, with 198 literature references, of the papers published in the fields of welding and cutting within the last three years. The subjects dealt with are: weldability of the materials - Welding methods - Thermal cutting - Shaping and calculation of welded joints - Environmental protection in welding and cutting. (orig.) [de

  8. Multidirectional Vector Excision Leads to Better Outcomes than Traditional Elliptical Excision of Facial Congenital Melanocytic Nevus

    Directory of Open Access Journals (Sweden)

    Seung Il Oh

    2013-09-01

    Full Text Available Background The elliptical excision is the standard method of removing benign skin lesions,such as congenital melanocytic nevi. This technique allows for primary closure, with little to nodog-ear deformity, but may sacrifice normal tissue adjacent to the lesion, resulting in scarswhich are unnecessarily long. This study was designed to compare the predicted results ofelliptical excision with those resulting from our excision technique.Methods Eighty-two patients with congenital melanocytic nevus on the face were prospectivelystudied. Each lesion was examined and an optimal ellipse was designed and marked onthe skin. After an incision on one side of the nevus margin, subcutaneous undermining wasperformed in the appropriate direction. The skin flap was pulled up and approximated alongseveral vectors to minimize the occurrence of dog-ear deformity.Results Overall, the final wound length was 21.1% shorter than that achieved by ellipticalexcision. Only 8.5% of the patients required dog-ear repair. There was no significant distortionof critical facial structures. All of the scars were deemed aesthetically acceptable based ontheir Patient and Observer Scar Assessment Scale scores.Conclusions When compared to elliptical excision, our technique appears to minimize dogeardeformity and decrease the final wound length. This technique should be considered analternative method for excision of facial nevi.

  9. Device for cutting protrusions

    Science.gov (United States)

    Bzorgi, Fariborz M [Knoxville, TN

    2011-07-05

    An apparatus for clipping a protrusion of material is provided. The protrusion may, for example, be a bolt head, a nut, a rivet, a weld bead, or a temporary assembly alignment tab protruding from a substrate surface of assembled components. The apparatus typically includes a cleaver having a cleaving edge and a cutting blade having a cutting edge. Generally, a mounting structure configured to confine the cleaver and the cutting blade and permit a range of relative movement between the cleaving edge and the cutting edge is provided. Also typically included is a power device coupled to the cutting blade. The power device is configured to move the cutting edge toward the cleaving edge. In some embodiments the power device is activated by a momentary switch. A retraction device is also generally provided, where the retraction device is configured to move the cutting edge away from the cleaving edge.

  10. A human homolog of the yeast nucleotide excision repair gene MMS19 interacts with transcription repair factor TFIIH through the XPB and XPD helicases.

    NARCIS (Netherlands)

    T. Seroz; G.S. Winkler (Sebastiaan); J. Auriol; R.A. Verhage; W. Vermeulen (Wim); B. Smit (Bep); J. Brouwer (Jaap); A.P.M. Eker (André); G. Weeda (Geert); J-M. Egly (Jean-Marc); J.H.J. Hoeijmakers (Jan)

    2000-01-01

    textabstractNucleotide excision repair (NER) removes UV-induced photoproducts and numerous other DNA lesions in a highly conserved 'cut-and-paste' reaction that involves approximately 25 core components. In addition, several other proteins have been identified which are dispensable for NER in vitro

  11. Value of histopathologic analysis of subcutis excisions by general practitioners

    Directory of Open Access Journals (Sweden)

    Verweij Wim

    2007-01-01

    Full Text Available Abstract Background Only around 60% of skin lesions excised by GPs are referred to a pathologist. Clinical diagnoses of skin excisions by GPs may not be very accurate. Subcutis excisions are rarely done by GPs, and there is hence little information in the literature on the histopathological yield of subcutis excisions by GPs with regard to malignancies. The aim of this study was to evaluate the yield of histopathological investigation of a relatively large group of subcutis excisions by GPs, with special emphasis on discrepancies between clinical and histopathological diagnoses of malignancy. Methods We investigated a series of 90 subcutis excisions, which was derived from a database of consecutive GP submissions from the years 1999–2000 where in the same time period 4595 skin excisions were performed by the same group of GPs. This underlines the apparent reluctance of GPs to perform subcutis excisions. Results The final diagnosis was benign in 88 cases (97.8% and malignant in 2 cases (2.2%. Seven cases had no clinical diagnosis, all of which were benign. Of the 83 clinically benign cases, 81 (97.6% were indeed benign and 2 (2.4% were malignant: one Merkel cell carcinoma and one dermatofibrosarcoma protuberans. The former was clinically thought to be a lipoma, and the latter a trichilemmal cyst. The dermatofibrosarcoma protuberans presented at the age of 27, and the Merkel cell carcinoma at the age of 60. Both were incompletely removed and required re-excision by a surgical oncologist. Conclusion Histopathological investigation of subcutis excisions by GPs yields unexpected and rare malignancies in about 2% of cases that may initially be excised inadequately. Based on these data, and because of the relatively rareness of these type of excisions, it could be argued that it may be worthwhile to have all subcutis excisions by GPs routinely investigated by histopathology.

  12. Extension without Cut

    OpenAIRE

    Straßburger , Lutz

    2012-01-01

    International audience; In proof theory one distinguishes sequent proofs with cut and cut-free sequent proofs, while for proof complexity one distinguishes Frege-systems and extended Frege-systems. In this paper we show how deep inference can provide a uniform treatment for both classifications, such that we can define cut-free systems with extension, which is neither possible with Frege-systems, nor with the sequent calculus. We show that the propositional pigeon-hole principle admits polyno...

  13. Influence of alcohol intake during lactation in the origin of alcohol addiction

    Directory of Open Access Journals (Sweden)

    Patrícia Bossolani Charlo Sanches

    2016-01-01

    Full Text Available Objective: to analyze the influence of alcohol intake during lactation in alcoholism onset. Methods: descriptive research with intentional convenient sample of 33 people addicted to alcohol and their mothers which assessed the correlation between the consumption of alcohol ingested using the instruments Cut down, Annoyde by criticims, Guilty and Eye-opener, and Tolerance, Annoyed, Cut down and Eye-opener. Results: addicts are men, young, single, with low level of education and income between one and five minimum wages. Among the patients who consider themselves alcoholics, 55.5% had mothers who considered themselves alcoholics and 60.0% of them had consumed alcohol during lactation, but this correlation was not significant. Conclusion: a positive correlation between alcohol consumption by mothers during breastfeeding and addiction of their children in adulthood was not found.

  14. Underwater cutting techniques developments

    International Nuclear Information System (INIS)

    Bach, F.-W.

    1990-01-01

    The primary circuit structures of different nuclear powerplants are constructed out of stainless steels, ferritic steels, plated ferritic steels and alloys of aluminium. According to the level of the specific radiation of these structures, it is necessary for dismantling to work with remote controlled cutting techniques. The most successful way to protect the working crew against exposure of radiation is to operate underwater in different depths. The following thermal cutting processes are more or less developed to work under water: For ferritic steels only - flame cutting; For ferritic steels, stainless steels, cladded steels and aluminium alloys - oxy-arc-cutting, arc-waterjet-cutting with a consumable electrode, arc-saw-cutting, plasma-arc-cutting and plasma-arc-saw. The flame cutting is a burning process, all the other processes are melt-cutting processes. This paper explains the different techniques, giving a short introduction of the theory, a discussion of the possibilities with the advantages and disadvantages of these processes giving a view into the further research work in this interesting field. (author)

  15. Changes in alcohol policies and public opinions in Finland 2003-2013.

    Science.gov (United States)

    Österberg, Esa; Lindeman, Mikaela; Karlsson, Thomas

    2014-05-01

    There is a constant and ongoing interplay between public opinions and public policies, alcohol policies being no exception. This article describes the development of public opinions regarding alcohol policy in Finland during a 10-year period between 2003 and 2013. Fluctuations in the alcohol policy opinion climate are put in context by looking at concurrent changes in alcohol policies and in total alcohol consumption. The study is based on data from opinion surveys on alcohol policies commissioned by the National Institute for Health and Welfare and the Finnish Social and Health Association. The opinion polls include questions about the general acceptance of prevailing alcohol policies, appropriate sales channels of different alcoholic beverage categories and opinions about the legal age limits and prices of alcoholic beverages. In the study, changes in alcohol policy during 2003-2013 are surveyed, and their relationship with changes in alcohol policy opinion is examined. There seem to be a strong positive correlation during the study period between the level of alcohol consumption and the share of those wanting a more restrictive alcohol policy in Finland. It seems that an increased level of awareness of alcohol-related issues among the general public created a more restrictive opinion climate on alcohol policy issues after the big alcohol excise duty decrease in 2004. The reverse seems to happen but in a lesser degree when alcohol excise duties has been increased after the year 2007. © 2014 Australasian Professional Society on Alcohol and other Drugs.

  16. Alar base reduction: the boomerang-shaped excision.

    Science.gov (United States)

    Foda, Hossam M T

    2011-04-01

    A boomerang-shaped alar base excision is described to narrow the nasal base and correct the excessive alar flare. The boomerang excision combined the external alar wedge resection with an internal vestibular floor excision. The internal excision was inclined 30 to 45 degrees laterally to form the inner limb of the boomerang. The study included 46 patients presenting with wide nasal base and excessive alar flaring. All cases were followed for a mean period of 18 months (range, 8 to 36 months). The laterally oriented vestibular floor excision allowed for maximum preservation of the natural curvature of the alar rim where it meets the nostril floor and upon its closure resulted in a considerable medialization of alar lobule, which significantly reduced the amount of alar flare and the amount of external alar excision needed. This external alar excision measured, on average, 3.8 mm (range, 2 to 8 mm), which is significantly less than that needed when a standard vertical internal excision was used ( P boomerang alar base excision proved to be a safe and effective technique for narrowing the nasal base and elimination of the excessive flaring and resulted in a natural, well-proportioned nasal base with no obvious scarring. © Thieme Medical Publishers.

  17. Surgical excision of eroded mesh after prior abdominal sacrocolpopexy.

    Science.gov (United States)

    South, Mary M T; Foster, Raymond T; Webster, George D; Weidner, Alison C; Amundsen, Cindy L

    2007-12-01

    We previously described an endoscopic-assisted transvaginal mesh excision technique. This study compares surgical outcomes after transvaginal mesh excision vs endoscopic-assisted transvaginal mesh excision. In addition, we reviewed our postoperative outcomes with excision via laparotomy. This was an inclusive retrospective analysis of patients presenting to our institution from 1997 to 2006 for surgical management of vaginal erosion of permanent mesh after sacrocolpopexy. Three techniques were utilized: transvaginal, endoscopic-assisted transvaginal, and laparotomy. For the patients undergoing transvaginal excision, data recorded included number and type of excisions performed, number of prior excisions performed at outside facilities, intraoperative and postoperative complications (including blood transfusions, pelvic abscess, or bowel complications), use of postoperative antibiotics, persistent symptoms of vaginal bleeding and discharge at follow-up, and demographic characteristics. The intraoperative and postoperative complications and the postoperative symptoms were recorded for the laparotomy cases. Thirty-one patients underwent transvaginal mesh excision during this time period: 17 endoscopic-assisted transvaginal and 14 transvaginal without endoscope assistance. In addition, a total of 7 patients underwent abdominal excision via laparotomy. Comparison of the 2 vaginal methods revealed no difference in the demographics or success rate, with success defined as no symptoms at follow-up. Endoscopic-assisted transvaginal excision was successful in 7 of 17 patients and transvaginal without endoscopic assistance in 9 of 13 patients (1 patient excluded for lack of follow-up data) for a total vaginal success rate of 53.3%. No intraoperative and only minor postoperative complications occurred with either vaginal method. Three patients underwent 3 vaginal attempts to achieve complete symptom resolution. The average follow-up time for the entire vaginal group was 14

  18. ALCOHOL I

    African Journals Online (AJOL)

    Despite the increase in alcohol marketing activities by the transnational alcohol corporations in Nigeria .... were recorded with a digital device with ..... era (i.e., before alcohol industry was es- tablished in ..... university student drinking: A na-.

  19. Cutting Class Harms Grades

    Science.gov (United States)

    Taylor, Lewis A., III

    2012-01-01

    An accessible business school population of undergraduate students was investigated in three independent, but related studies to determine effects on grades due to cutting class and failing to take advantage of optional reviews and study quizzes. It was hypothesized that cutting classes harms exam scores, attending preexam reviews helps exam…

  20. Trans-sphenoidal excision of craniopharyngiomas.

    Directory of Open Access Journals (Sweden)

    Nagpal R

    1991-04-01

    Full Text Available Craniopharyngiomas have been by and large excised by the transcranial route. Since 1982, 11 patients have been operated by the traus-sphensidal route in the department. The clinical features with which they were presented, diagnostic investigations, details of surgical procedures and follow-up analysis is being presented here. A retrospective study of radiological investigation was done to determine the features that help decide the choice of surgical approach to these lesions. Only lesions that were primarily intrasellar, cystic and those that expanded the sella could be treated by the trans-sphenoidal route. Associated suprasellar extensions could also be removed. Predominantly calcified or firm, fleshy tumours lent themselves poorly to removal by the trans-sphenoidal route.

  1. Regulation of nucleotide excision repair through ubiquitination

    Institute of Scientific and Technical Information of China (English)

    Jia Li; Audesh Bhat; Wei Xiao

    2011-01-01

    Nucleotide excision repair (NER) is the most versatile DNA-repair pathway in all organisms.While bacteria require only three proteins to complete the incision step of NER,eukaryotes employ about 30 proteins to complete the same step.Here we summarize recent studies demonstrating that ubiquitination,a post-translational modification,plays critical roles in regulating the NER activity either dependent on or independent of ubiquitin-proteolysis.Several NER components have been shown as targets of ubiquitination while others are actively involved in the ubiquitination process.We argue through this analysis that ubiquitination serves to coordinate various steps of NER and meanwhile connect NER with other related pathways to achieve the efficient global DNA-damage response.

  2. Piezosurgery for Excision of Large Osteoid Osteoma.

    Science.gov (United States)

    Gadre, Pushkar; Singh, Divya; Gadre, Kiran; Khan, Imran

    2016-10-01

    Osteoid osteoma, a rare benign osteoblastic tumor first described by Jaffe in 1935, is characterized as a small but painful lesion that mostly affects younger people. Usually benign and harmless, osteomas are removed for pain or esthetic reasons.Piezoelectric surgery is also increasingly being used effectively in major and minor osseous oral and maxillofacial surgeries, in delicate areas. It is used regularly for various procedures, including sinus lift procedures, bone graft harvesting, osteogenic distraction, ridge expansion, inferior alveolar nerve decompression and lateralization, cyst removal, dental extraction, and impacted tooth removal.The following report presents a patient of intraoral excision of a large osteoid osteoma from lingual aspect of mandibular lower border in the body region using piezoelectric surgery.

  3. Fundamentals of cutting.

    Science.gov (United States)

    Williams, J G; Patel, Y

    2016-06-06

    The process of cutting is analysed in fracture mechanics terms with a view to quantifying the various parameters involved. The model used is that of orthogonal cutting with a wedge removing a layer of material or chip. The behaviour of the chip is governed by its thickness and for large radii of curvature the chip is elastic and smooth cutting occurs. For smaller thicknesses, there is a transition, first to plastic bending and then to plastic shear for small thicknesses and smooth chips are formed. The governing parameters are tool geometry, which is principally the wedge angle, and the material properties of elastic modulus, yield stress and fracture toughness. Friction can also be important. It is demonstrated that the cutting process may be quantified via these parameters, which could be useful in the study of cutting in biology.

  4. Direct micro-CT observation confirms the induction of embolism upon xylem cutting under tension

    Science.gov (United States)

    We used two different Synchrotron-based micro-CT facilities (SLS: Swiss Light Source, Villigen, Switzerland, and ALS: Advanced Light Source, Berkeley, CA USA) to test the excision artifact described by Wheeler et al. (2013). Specifically, we examined the impact of cutting xylem under tension and und...

  5. Impact of Maryland's 2011 alcohol sales tax increase on alcoholic beverage sales.

    Science.gov (United States)

    Esser, Marissa B; Waters, Hugh; Smart, Mieka; Jernigan, David H

    2016-07-01

    Increasing alcohol taxes has proven effective in reducing alcohol consumption, but the effects of alcohol sales taxes on sales of specific alcoholic beverages have received little research attention. Data on sales are generally less subject to reporting biases than self-reported patterns of alcohol consumption. We aimed to assess the effects of Maryland's July 1, 2011 three percentage point increase in the alcohol sales tax (6-9%) on beverage-specific and total alcohol sales. Using county-level data on Maryland's monthly alcohol sales in gallons for 2010-2012, by beverage type, multilevel mixed effects multiple linear regression models estimated the effects of the tax increase on alcohol sales. We controlled for seasonality, county characteristics, and national unemployment rates in the main analyses. In the 18 months after the tax increase, average per capita sales of spirits were 5.1% lower (p sales were 3.2% lower (p sales were 2.5% lower (p sales trends in the 18 months prior to the tax increase. Overall, the alcohol sales tax increase was associated with a 3.8% decline in total alcohol sold relative to what would have been expected based on sales in the prior 18 months (p increased alcohol sales taxes may be as effective as excise taxes in reducing alcohol consumption and related problems. Sales taxes also have the added advantages of rising with inflation and taxing the highest priced beverages most heavily.

  6. Excision technique in constrained formulations of Einstein equations: collapse scenario

    International Nuclear Information System (INIS)

    Cordero-Carrión, I; Vasset, N; Novak, J; Jaramillo, J L

    2015-01-01

    We present a new excision technique used in constrained formulations of Einstein equations to deal with black hole in numerical simulations. We show the applicability of this scheme in several scenarios. In particular, we present the dynamical evolution of the collapse of a neutron star to a black hole, using the CoCoNuT code and this excision technique. (paper)

  7. Revenue and Health Impacts of Restructuring Tobacco Excise Tax ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Revenue and Health Impacts of Restructuring Tobacco Excise Tax in the Philippines. A proposed law in the Philippines to increase the excise tax on tobacco by 215% will likely have implications for tobacco control and consumption, and public health, not just for that country but for the region. Although half of deaths due to ...

  8. Circumareolar Incision‑subdermal Tunneling Dissection for Excision ...

    African Journals Online (AJOL)

    Excision of multiple fibroadenomas (MF) in separate breast quadrants presents difficulties of number and location of incision(s) and extent of tissue dissection and may be associated with more complications and poorer cosmetic outcome. This is a report of excision of MF in multiple quadrants of the breast using a ...

  9. Effects of burn wound excision on bacterial colonization and invasion

    NARCIS (Netherlands)

    Barret, JP; Herndon, DN

    Rates of survival after thermal injury have improved in the past two decades, and rates of wound infections and sepsis have decreased during the same period. Early excision has been advocated as one of the major factors, but its safety and efficacy and the exact timing of burn excision are still

  10. P element excision in drosophila melanogaster and related drosophilids

    Science.gov (United States)

    The frequency of P element excision and the structure of the resulting excision products were determined in three drosophilid species, Drosophila melanogaster, D. virilis, and Chymomyza procnemis. A transient P element mobility assay was conducted in the cells of developing insect embryos, but unlik...

  11. Advanced cutting techniques: laser and fissuration cutting

    International Nuclear Information System (INIS)

    Migliorati, B.; Gay, P.

    1984-01-01

    Experimental tests have been performed using CO 2 laser with output power 1 to 15 kW to evaluate the effect of varying the following parameters: material (carbon steel Fe 42 C, stainless steel AISI 304, concrete), laser power, beam characteristics, work piece velocity, gas type and distribution on the laser interaction zone. In the case of concrete, drilling depths of 80 mm were obtained in a few seconds using a 10 kW laser beam. Moreover pieces of 160 mm were cut at 0.01 meters per minute. Results with carbon steel indicated maximum thicknesses of 110 mm, cut at 0.01 meters per minute with 10 kW, depths about 20% lower were obtained with the AISI 304 stainless steel. A parallel investigation was aimed at characterizing particulate emission during the laser cutting process. At the end of the research it was possible to elaborate a preliminary proposal concerning a laser based dismantling system for the application to a typical Nuclear Power Station. (author)

  12. Laser Cutting, Development Trends

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    1999-01-01

    In this paper a short review of the development trends in laser cutting will be given.The technology, which is the fastest expanding industrial production technology will develop in both its core market segment: Flat bed cutting of sheet metal, as it will expand in heavy industry and in cutting...... of 3-dimensional shapes.The CO2-laser will also in the near future be the dominating laser source in the market, although the new developments in ND-YAG-lasers opens for new possibilities for this laser type....

  13. Experimental testing of exchangeable cutting inserts cutting ability

    OpenAIRE

    Čep, Robert; Janásek, Adam; Čepová, Lenka; Petrů, Jana; Hlavatý, Ivo; Car, Zlatan; Hatala, Michal

    2013-01-01

    The article deals with experimental testing of the cutting ability of exchangeable cutting inserts. Eleven types of exchangeable cutting inserts from five different manufacturers were tested. The tested cutting inserts were of the same shape and were different especially in material and coating types. The main aim was both to select a suitable test for determination of the cutting ability of exchangeable cutting inserts and to design such testing procedure that could make it possible...

  14. Black Alcoholism.

    Science.gov (United States)

    Watts, Thomas D.; Wright, Roosevelt

    1988-01-01

    Examines some aspects of the problem of alcoholism among Blacks, asserting that Black alcoholism can best be considered in an ecological, environmental, sociocultural, and public health context. Notes need for further research on alcoholism among Blacks and for action to reduce the problem of Black alcoholism. (NB)

  15. Effects of Specific Alcohol Control Policy Measures on Alcohol-Related Mortality in Russia from 1998 to 2013.

    Science.gov (United States)

    Khaltourina, Daria; Korotayev, Andrey

    2015-09-01

    To elucidate the possible effects of alcohol control policy measures on alcohol-related mortality in Russia between 1998 and 2013. Trends in mortality, alcohol production and sales were analyzed in conjunction with alcohol control legislative measures. Correlation analysis of health and alcohol market indicators was performed. Ethyl alcohol production was the strongest correlate of alcohol-related mortality, which is probably due to the fact that ethyl alcohol is used for both recorded and unrecorded alcohol production. Measures producing greatest mortality reduction effect included provisions which reduced ethyl alcohol production (introduction of minimum authorized capital for ethyl alcohol and liquor producers in 2006 and the requirement for distillery dreg processing), as well as measures to tax and denaturize ethanol-containing liquids in 2006. Liquor tax decrease in real terms was associated with rising mortality in 1998-1999, while excise tax increase was associated with mortality reduction in 2004 and since 2012. Conventional alcohol control measures may also have played a moderately positive role. Countries with high alcohol-related mortality should aim for a reduction in spirits consumption as a major health policy. Alcohol market centralization and reduction of the number of producers can have immediate strong effects on mortality. These measures should be combined with an increase in alcohol taxes and prices, as well as other established alcohol policy measures. In 2015 in Russia, this is not being implemented. In Russia, legislation enforcement including excise tax collection remains the major challenge. Another challenge will be the integration into the Eurasian Economic Union. © The Author 2015. Medical Council on Alcohol and Oxford University Press. All rights reserved.

  16. Cut without Killing.

    Science.gov (United States)

    Black, Susan

    1991-01-01

    The zero-based curriculum model can help school boards and administrators make decisions about what to keep and what to cut. All instructional programs are ranked and judged in categories ranging from required to optional. (MLF)

  17. Short-cut math

    CERN Document Server

    Kelly, Gerard W

    1984-01-01

    Clear, concise compendium of about 150 time-saving math short-cuts features faster, easier ways to add, subtract, multiply, and divide. Each problem includes an explanation of the method. No special math ability needed.

  18. Laser cutting system

    Science.gov (United States)

    Dougherty, Thomas J

    2015-03-03

    A workpiece cutting apparatus includes a laser source, a first suction system, and a first finger configured to guide a workpiece as it moves past the laser source. The first finger includes a first end provided adjacent a point where a laser from the laser source cuts the workpiece, and the first end of the first finger includes an aperture in fluid communication with the first suction system.

  19. How Can I Stop Cutting?

    Science.gov (United States)

    ... Educators Search English Español How Can I Stop Cutting? KidsHealth / For Teens / How Can I Stop Cutting? ... in a soft, cozy blanket Substitutes for the Cutting Sensation You'll notice that all the tips ...

  20. Cutting and Self-Harm

    Science.gov (United States)

    ... Your feelings Feeling sad Cutting and self-harm Cutting and self-harm Self-harm, sometimes called self- ... There are many types of self-injury, and cutting is one type that you may have heard ...

  1. Flux cutting in superconductors

    International Nuclear Information System (INIS)

    Campbell, A M

    2011-01-01

    This paper describes experiments and theories of flux cutting in superconductors. The use of the flux line picture in free space is discussed. In superconductors cutting can either be by means of flux at an angle to other layers of flux, as in longitudinal current experiments, or due to shearing of the vortex lattice as in grain boundaries in YBCO. Experiments on longitudinal currents can be interpreted in terms of flux rings penetrating axial lines. More physical models of flux cutting are discussed but all predict much larger flux cutting forces than are observed. Also, cutting is occurring at angles between vortices of about one millidegree which is hard to explain. The double critical state model and its developments are discussed in relation to experiments on crossed and rotating fields. A new experiment suggested by Clem gives more direct information. It shows that an elliptical yield surface of the critical state works well, but none of the theoretical proposals for determining the direction of E are universally applicable. It appears that, as soon as any flux flow takes place, cutting also occurs. The conclusion is that new theories are required. (perspective)

  2. Metabolic modulation of mammalian DNA excision repair

    Energy Technology Data Exchange (ETDEWEB)

    Schrader, T.J.

    1988-01-01

    First, ultraviolet light (UVL)- and dimethylsulfate (DMS)-induced excision repair was examined in quiescent and lectin-stimulated bovine lymphocytes. Upon mitogenic stimulation, UVL-induced repair increased by a factor of 2 to 3, and reached this maximum 2 days before the onset of DNA replication. However, DMS-induced repair increased sevenfold in parallel with DNA replication. Repair patch sizes were smaller for DMS-induced damage reflecting patches of 7 nucleotides in quiescent lymphocytes compared to 20 nucleotides induced by UVL. The patch size increased during lymphocyte stimulation until one day prior to the peak of DNA replication when patch sizes of 45 and 35 nucleotides were produced in response to UVL- and DMS-induced damage, respectively. At the peak of DNA replication, the patch sizes were equal for both damaging agents at 34 nucleotides. In the second study, a small amount of repair replication was observed in undamaged quiescent and concanavalin A-stimulated bovine lymphocytes as well as in human T98G glioblastoma cells. Repair incorporation doubled in the presence of hydroxyurea. Thirdly, the enhanced repair replication induced by the poly (ADP-ribose) polymerase inhibitor, 3-aminobenzamide, (3-AB), could not be correlated either with an increased rate of repair in the presence of 3-AB or with the use of hydroxyurea in the repair protocol. Finally, treatment of unstimulated lymphocytes with hyperthermia was accompanied by decreased repair replication while the repair patches remained constant at 20 nucleotides.

  3. Diode Laser Excision of Oral Benign Lesions.

    Science.gov (United States)

    Mathur, Ena; Sareen, Mohit; Dhaka, Payal; Baghla, Pallavi

    2015-01-01

    Lasers have made tremendous progress in the field of dentistry and have turned out to be crucial in oral surgery as collateral approach for soft tissue surgery. This rapid progress can be attributed to the fact that lasers allow efficient execution of soft tissue procedures with excellent hemostasis and field visibility. When matched to scalpel, electrocautery or high frequency devices, lasers offer maximum postoperative patient comfort. Four patients agreed to undergo surgical removal of benign lesions of the oral cavity. 810 nm diode lasers were used in continuous wave mode for excisional biopsy. The specimens were sent for histopathological examination and patients were assessed on intraoperative and postoperative complications. Diode laser surgery was rapid, bloodless and well accepted by patients and led to complete resolution of the lesions. The excised specimen proved adequate for histopathological examination. Hemostasis was achieved immediately after the procedure with minimal postoperative problems, discomfort and scarring. We conclude that diode lasers are rapidly becoming the standard of care in contemporary dental practice and can be employed in procedures requiring excisional biopsy of oral soft tissue lesions with minimal problems in histopathological diagnosis.

  4. Lingual Thyroid Excision with Transoral Robotic Surgery

    Directory of Open Access Journals (Sweden)

    Elif Ersoy Callıoglu

    2015-01-01

    Full Text Available Ectopic thyroid gland may be detected at any place between foramen caecaum and normal thyroid localization due to inadequacy of the embryological migration of the thyroid gland. It has a prevalence varying between 1/10.000 and 1/100000 in the community. Usually follow-up without treatment is preferred except for obstructive symptoms, bleeding, and suspicion of malignity. Main symptoms are dysphagia, dysphonia, bleeding, dyspnea, and obstructive sleep apnea. In symptomatic cases, the first described method in surgical treatment is open approach since it is a region difficult to have access to. However, this approach has an increased risk of morbidity and postoperative complications. Transoral robotic surgery, which is a minimally invasive surgical procedure, has advantages such as larger three-dimensional point of view and ease of manipulation due to robotic instruments. In this report, a case at the age of 49 who presented to our clinic with obstructive symptoms increasing within the last year and was found to have lingual thyroid and underwent excision of ectopic thyroid tissue by da Vinci surgical system is presented.

  5. Nasal encephalocele: endoscopic excision with anesthetic consideration.

    Science.gov (United States)

    Abdel-Aziz, Mosaad; El-Bosraty, Hussam; Qotb, Mohamed; El-Hamamsy, Mostafa; El-Sonbaty, Mohamed; Abdel-Badie, Hazem; Zynabdeen, Mustapha

    2010-08-01

    Nasal encephalocele may presents as a nasal mass, its treatment is surgical and it should be done early in life. When removal is indicated, there are multiple surgical approaches; including lateral rhinotomy, a transnasal approach and a coronal flap approach. However, the treatment of a basal intranasal encephalocele using transnasal endoscopic approach could obviates the possible morbidity associated with other approaches. The aim of this study was to evaluate the efficacy of endoscopic removal of intranasal encephalocele, also to document the role of anesthetist in the operative and postoperative periods. Nine cases with nasal encephalocele were included in this study; CT and/or MRI were used in their examination. The lesions were removed via transnasal endoscopic approach. Preoperative evaluation, intervention and postoperative follow-up were presented with discussion of anesthesia used for those children. The lesions of all patients were removed successfully with no recurrence through the follow-up period of at least 21 months. No cases showed morbidity or mortality intra- or post-operatively. Endoscopic excision of intranasal encephalocele is an effective method with high success rate. Anesthetist plays an important role in the operative and postoperative period, even during the endoscopic follow up; sedation of the children is usually needed. Copyright (c) 2010 Elsevier Ireland Ltd. All rights reserved.

  6. Uptake of benzyladenine by excised watermelon cotyledons.

    Science.gov (United States)

    Lampugnani, M G; Fantelli, R; Longo, G P; Longo, C P; Rossi, G

    1981-07-01

    The uptake of 8-[(14)C]N(6)-benzyladenine (BA) was studied in excised watermelon (Citrullus vulgaris Schrad.) cotyledons 24 hours after the start of imbibition. The passive nature of this uptake is suggested by the following evidence: (a) no sign of saturation on increasing external concentration of BA; (b) no decrease in uptake under conditions that inhibit ATP synthesis; (c) no change in amount of radioactivity absorbed when cotyledons are frozen and thawed before the uptake test. About two-thirds of the radioactivity taken up is released after 12 hours of washing. If the washing is performed at 2 C very little radioactivity is released.There seems to be a correlation between the level of radioactivity (i.e. of BA + derivatives) present in the cotyledons and the magnitude of hormonal responses that are observed four days after uptake. This relationship holds regardless of whether a given level of radioactivity has been reached after a short period of uptake or after a long period of uptake followed by washing.

  7. On Permuting Cut with Contraction

    OpenAIRE

    Borisavljevic, Mirjana; Dosen, Kosta; Petric, Zoran

    1999-01-01

    The paper presents a cut-elimination procedure for intuitionistic propositional logic in which cut is eliminated directly, without introducing the multiple-cut rule mix, and in which pushing cut above contraction is one of the reduction steps. The presentation of this procedure is preceded by an analysis of Gentzen's mix-elimination procedure, made in the perspective of permuting cut with contraction. It is also shown that in the absence of implication, pushing cut above contraction doesn't p...

  8. Repair of DNA-polypeptide crosslinks by human excision nuclease

    Science.gov (United States)

    Reardon, Joyce T.; Sancar, Aziz

    2006-03-01

    DNA-protein crosslinks are relatively common DNA lesions that form during the physiological processing of DNA by replication and recombination proteins, by side reactions of base excision repair enzymes, and by cellular exposure to bifunctional DNA-damaging agents such as platinum compounds. The mechanism by which pathological DNA-protein crosslinks are repaired in humans is not known. In this study, we investigated the mechanism of recognition and repair of protein-DNA and oligopeptide-DNA crosslinks by the human excision nuclease. Under our assay conditions, the human nucleotide excision repair system did not remove a 16-kDa protein crosslinked to DNA at a detectable level. However, 4- and 12-aa-long oligopeptides crosslinked to the DNA backbone were recognized by some of the damage recognition factors of the human excision nuclease with moderate selectivity and were excised from DNA at relatively efficient rates. Our data suggest that, if coupled with proteolytic degradation of the crosslinked protein, the human excision nuclease may be the major enzyme system for eliminating protein-DNA crosslinks from the genome. damage recognition | nucleotide excision repair

  9. The Strategy of Excise Taxation of Tobacco Products in Ukraine

    Directory of Open Access Journals (Sweden)

    Pasichnyi Mykola D.

    2017-06-01

    Full Text Available The article is aimed at disclosing and improving approaches to the development of a strategy of excise tax policy in Ukraine, taking into account the foreign experience of harmonizing tax legislation in this sphere. An analysis of the implementation of the EU directives on the regulation of the minimum excise tax liability for the payment of excise taxes on tobacco products in the countries with transformational economies has been carried out. It has been found that, in cases of excessive tax pressure, the equilibrium of the market is disrupted, its shadow component is growing, and the overall economic efficiency level decreases. It has been determined that for the period of 2007-2016 the availability index for cigarettes in Ukraine decreased 2,3 times, which in some way demotivated their consumption. However, the change in the approach of calculation of ad valorem rate for the excise tax and introduction of the excise tax on the sub-excise goods sold by the retailers led to manipulative actions by the major actors in the market concerning the price of cigarettes, which impacted both the increase in the availability of cigarettes in 2016 and the decline in budget revenues. Regulation of the minimum excise duty is the most effective instrument of fiscal policy to achieve goals in the area of limitation of smoking.

  10. Female genital cutting.

    Science.gov (United States)

    Perron, Liette; Senikas, Vyta; Burnett, Margaret; Davis, Victoria

    2013-11-01

    To strengthen the national framework for care of adolescents and women affected by female genital cutting (FGC) in Canada by providing health care professionals with: (1) information intended to strengthen their knowledge and understanding of the practice; (2) directions with regard to the legal issues related to the practice; (3) clinical guidelines for the management of obstetric and gynaecological care, including FGC related complications; and (4) guidance on the provision of culturally competent care to adolescents and women with FGC. Published literature was retrieved through searches of PubMed, CINAHL, and The Cochrane Library in September 2010 using appropriate controlled vocabulary (e.g., Circumcision, Female) and keywords (e.g., female genital mutilation, clitoridectomy, infibulation). We also searched Social Science Abstracts, Sociological Abstracts, Gender Studies Database, and ProQuest Dissertations and Theses in 2010 and 2011. There were no date or language restrictions. Searches were updated on a regular basis and incorporated in the guideline to December 2011. Grey (unpublished) literature was identified through searching the websites of health technology assessment and health technology-related agencies, clinical practice guideline collections, clinical trial registries, and national and international medical specialty societies. The quality of evidence in this document was rated using the criteria described in the Report of the Canadian Task Force on Preventive Health Care (Table 1). Summary Statements 1. Female genital cutting is internationally recognized as a harmful practice and a violation of girls' and women's rights to life, physical integrity, and health. (II-3) 2. The immediate and long-term health risks and complications of female genital cutting can be serious and life threatening. (II-3) 3. Female genital cutting continues to be practised in many countries, particularly in sub-Saharan Africa, Egypt, and Sudan. (II-3) 4. Global migration

  11. Nasal base narrowing: the combined alar base excision technique.

    Science.gov (United States)

    Foda, Hossam M T

    2007-01-01

    To evaluate the role of the combined alar base excision technique in narrowing the nasal base and correcting excessive alar flare. The study included 60 cases presenting with a wide nasal base and excessive alar flaring. The surgical procedure combined an external alar wedge resection with an internal vestibular floor excision. All cases were followed up for a mean of 32 (range, 12-144) months. Nasal tip modification and correction of any preexisting caudal septal deformities were always completed before the nasal base narrowing. The mean width of the external alar wedge excised was 7.2 (range, 4-11) mm, whereas the mean width of the sill excision was 3.1 (range, 2-7) mm. Completing the internal excision first resulted in a more conservative external resection, thus avoiding any blunting of the alar-facial crease. No cases of postoperative bleeding, infection, or keloid formation were encountered, and the external alar wedge excision healed with an inconspicuous scar that was well hidden in the depth of the alar-facial crease. Finally, the risk of notching of the alar rim, which can occur at the junction of the external and internal excisions, was significantly reduced by adopting a 2-layered closure of the vestibular floor (P = .01). The combined alar base excision resulted in effective narrowing of the nasal base with elimination of excessive alar flare. Commonly feared complications, such as blunting of the alar-facial crease or notching of the alar rim, were avoided by using simple modifications in the technique of excision and closure.

  12. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Mengjiao Yu; Ramadan Ahmed; Mark Pickell; Len Volk; Lei Zhou; Zhu Chen; Aimee Washington; Crystal Redden

    2003-09-30

    The Quarter began with installing the new drill pipe, hooking up the new hydraulic power unit, completing the pipe rotation system (Task 4 has been completed), and making the SWACO choke operational. Detailed design and procurement work is proceeding on a system to elevate the drill-string section. The prototype Foam Generator Cell has been completed by Temco and delivered. Work is currently underway to calibrate the system. Literature review and preliminary model development for cuttings transportation with polymer foam under EPET conditions are in progress. Preparations for preliminary cuttings transport experiments with polymer foam have been completed. Two nuclear densitometers were re-calibrated. Drill pipe rotation system was tested up to 250 RPM. Water flow tests were conducted while rotating the drill pipe up to 100 RPM. The accuracy of weight measurements for cuttings in the annulus was evaluated. Additional modifications of the cuttings collection system are being considered in order to obtain the desired accurate measurement of cuttings weight in the annular test section. Cutting transport experiments with aerated fluids are being conducted at EPET, and analyses of the collected data are in progress. The printed circuit board is functioning with acceptable noise level to measure cuttings concentration at static condition using ultrasonic method. We were able to conduct several tests using a standard low pass filter to eliminate high frequency noise. We tested to verify that we can distinguish between different depths of sand in a static bed of sand. We tested with water, air and a mix of the two mediums. Major modifications to the DTF have almost been completed. A stop-flow cell is being designed for the DTF, the ACTF and Foam Generator/Viscometer which will allow us to capture bubble images without the need for ultra fast shutter speeds or microsecond flash system.

  13. Laparoscopic excision of a newborn rectal duplication cyst.

    Science.gov (United States)

    Hartin, Charles W; Lau, Stanley T; Escobar, Mauricio A; Glick, Philip L

    2008-08-01

    Congenital rectal duplication cyst is a rare entity treated with surgical excision. Without treatment, a rectal duplication cyst may cause a variety of complications, most notably, transforming into a malignancy. We report on a 7-week-old girl who was found to have a rectal duplication cyst. The rectal duplication cyst was successfully excised laparoscopically. Rectal duplication cysts are rare alimentary tract anomalies generally discovered during childhood. Complications include symptoms arising from the cyst and the possibility of malignant degeneration. They are typically managed by surgical excision.

  14. Improved cutting performance in high power laser cutting

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    2003-01-01

    Recent results in high power laser cutting especially with focus on cutting of mild grade steel types for shipbuilding are described.......Recent results in high power laser cutting especially with focus on cutting of mild grade steel types for shipbuilding are described....

  15. The Role of Designated Driver Programs in the Prevention of Alcohol-Impaired Driving: A Critical Reassessment [and] Designated Driver Programs: A Commentary on the DeJong and Wallack Article.

    Science.gov (United States)

    DeJong, William; And Others

    1992-01-01

    Focus on the designated driver strategy by broadcasters and the alcohol industry deflects attention from other alcohol-related problems and the factors influencing underage alcohol consumption. Strategies should emphasize sobriety checkpoints, no sales to minors, advertising reform, and excise taxes on alcohol. (SK)

  16. Determination of cut front position in laser cutting

    International Nuclear Information System (INIS)

    Pereira, M; Thombansen, U

    2016-01-01

    Laser cutting has a huge importance to manufacturing industry. Laser cutting machines operate with fixed technological parameters and this does not guarantee the best productivity. The adjustment of the cutting parameters during operation can improve the machine performance. Based on a coaxial measuring device it is possible to identify the cut front position during the cutting process. This paper describes the data analysis approach used to determine the cut front position for different feed rates. The cut front position was determined with good resolution, but improvements are needed to make the whole process more stable. (paper)

  17. Determination of cut front position in laser cutting

    Science.gov (United States)

    Pereira, M.; Thombansen, U.

    2016-07-01

    Laser cutting has a huge importance to manufacturing industry. Laser cutting machines operate with fixed technological parameters and this does not guarantee the best productivity. The adjustment of the cutting parameters during operation can improve the machine performance. Based on a coaxial measuring device it is possible to identify the cut front position during the cutting process. This paper describes the data analysis approach used to determine the cut front position for different feed rates. The cut front position was determined with good resolution, but improvements are needed to make the whole process more stable.

  18. Nucleotide excision repair in differentiated cells

    Energy Technology Data Exchange (ETDEWEB)

    Wees, Caroline van der [Department of Toxicogenetics, Leiden University Medical Center, Leiden (Netherlands); Department of Cardiology, Leiden University Medical Center, Leiden (Netherlands); Jansen, Jacob [Department of Toxicogenetics, Leiden University Medical Center, Leiden (Netherlands); Vrieling, Harry [Department of Toxicogenetics, Leiden University Medical Center, Leiden (Netherlands); Laarse, Arnoud van der [Department of Cardiology, Leiden University Medical Center, Leiden (Netherlands); Zeeland, Albert van [Department of Toxicogenetics, Leiden University Medical Center, Leiden (Netherlands); Mullenders, Leon [Department of Toxicogenetics, Leiden University Medical Center, Leiden (Netherlands)]. E-mail: l.mullenders@lumc.nl

    2007-01-03

    Nucleotide excision repair (NER) is the principal pathway for the removal of a wide range of DNA helix-distorting lesions and operates via two NER subpathways, i.e. global genome repair (GGR) and transcription-coupled repair (TCR). Although detailed information is available on expression and efficiency of NER in established mammalian cell lines, little is known about the expression of NER pathways in (terminally) differentiated cells. The majority of studies in differentiated cells have focused on repair of UV-induced cyclobutane pyrimidine dimers (CPD) and 6-4-photoproducts (6-4PP) because of the high frequency of photolesions at low level of toxicity and availability of sensitive technologies to determine photolesions in defined regions of the genome. The picture that emerges from these studies is blurred and rather complex. Fibroblasts and terminally differentiated myocytes of the rat heart display equally efficient GGR of 6-4PP but poor repair of CPD due to the absence of p48 expression. This repair phenotype is clearly different from human terminal differentiated neurons. Furthermore, both cell types were found to carry out TCR of CPD, thus mimicking the repair phenotype of established rodent cell lines. In contrast, in intact rat spermatogenic cells repair was very inefficient at the genome overall level and in transcriptionally active genes indicating that GGR and TCR are non-functional. Also, non-differentiated mouse embryonic stem (ES) cells exhibit low levels of NER after UV irradiation. However, the mechanisms that lead to low NER activity are clearly different: in differentiated spermatogenic cells differences in chromatin compaction and sequestering of NER proteins may underlie the lack of NER activity in pre-meiotic cells, whereas in non-differentiated ES cells NER is impaired by a strong apoptotic response.

  19. DNA excision repair in permeable human fibroblasts

    International Nuclear Information System (INIS)

    Kaufmann, W.K.; Bodell, W.J.; Cleaver, J.E.

    1983-01-01

    U.v. irradiation of confluent human fibroblasts activated DNA repair, aspects of which were characterized in the cells after they were permeabilized. Incubation of intact cells for 20 min between irradiation and harvesting was necessary to obtain a maximum rate of reparative DNA synthesis. Cells harvested immediately after irradiation before repair was initiated displayed only a small stimulation of DNA synthesis, indicating that permeable cells have a reduced capacity to recognize pyrimidine dimers and activate repair. The distribution of sizes of DNA strands labeled during 10 min of reparative DNA synthesis resembled that of parental DNA. However, during a 60-min incubation of permeable cells at 37 degrees C, parental DNA and DNA labeled by reparative DNA synthesis were both cleaved to smaller sizes. Cleavage also occurred in unirradiated cells, indicating that endogenous nuclease was active during incubation. Repair patches synthesized in permeable cells displayed increased sensitivity to digestion by micrococcal nuclease. However, the change in sensitivity during a chase with unlabeled DNA precursors was small, suggesting that reassembly of nucleosome structure at sites of repair was impaired. To examine whether this deficiency was due to a preponderance of incomplete or unligated repair patches, 3H-labeled (repaired) DNA was purified, then digested with exonuclease III and nuclease S1 to probe for free 3' ends and single-stranded regions. About 85% of the [3H]DNA synthesized during a 10-min pulse resisted digestion, suggesting that a major fraction of the repair patches that were filled were also ligated. U.v. light-activated DNA synthesis in permeable cells, therefore, appears to represent the continuation of reparative gap-filling at sites of excision repair activated within intact cells. Gap-filling and ligation were comparatively efficient processes in permeable cells

  20. Both base excision repair and nucleotide excision repair in humans are influenced by nutritional factors.

    Science.gov (United States)

    Brevik, Asgeir; Karlsen, Anette; Azqueta, Amaya; Tirado, Anna Estaban; Blomhoff, Rune; Collins, Andrew

    2011-01-01

    Lack of reliable assays for DNA repair has largely prevented measurements of DNA repair from being included in human biomonitoring studies. Using newly developed modifications of the comet assay we tested whether a fruit- and antioxidant-rich plant-based intervention could affect base excision repair (BER) and nucleotide excision repair (NER) in a group of 102 male volunteers. BER and NER repair capacities were measured in lymphocytes before and after a dietary intervention lasting 8 weeks. The study had one control group, one group consuming three kiwifruits per day and one group consuming a variety of antioxidant-rich fruits and plant products in addition to their normal diet. DNA strand breaks were reduced following consumption of both kiwifruits (13%, p = 0.05) and antioxidant-rich plant products (20%, p = 0.02). Increased BER (55%, p = 0.01) and reduced NER (-39%, p plant products. Reduced NER was also observed in the kiwifruit group (-38%, p = 0.05), but BER was not affected in this group. Here we have demonstrated that DNA repair is affected by diet and that modified versions of the comet assay can be used to assess activity of different DNA repair pathways in human biomonitoring studies. Copyright © 2010 John Wiley & Sons, Ltd.

  1. Underwater plasma arc cutting

    International Nuclear Information System (INIS)

    Leautier, R.; Pilot, G.

    1991-01-01

    This report describes the work done to develop underwater plasma arc cutting techniques, to characterise aerosols from cutting operations on radioactive and non-radioactive work-pieces, and to develop suitable ventilation and filtration techniques. The work has been carried out in the framework of a contract between CEA-CEN Cadarache and the Commission of European Communities. Furthermore, this work has been carried out in close cooperation with CEA-CEN Saclay mainly for secondary emissions and radioactive analysis. The contract started in May 1986 and was completed in December 1988 by a supplementary agreement. This report has been compiled from several progress reports submitted during the work period, contains the main findings of the work and encloses the results of comparative tests on plasma arc cutting

  2. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Troy Reed; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira; Lei Zhou

    2000-01-30

    This is the second quarterly progress report for Year 2 of the ACTS project. It includes a review of progress made in Flow Loop development and research during the period of time between Oct 1, 2000 and December 31, 2000. This report presents a review of progress on the following specific tasks: (a) Design and development of an Advanced Cuttings Transport Facility (Task 2: Addition of a foam generation and breaker system), (b) Research project (Task 6): ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (c) Research project (Task 7): ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (d) Research project (Task 8): ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (e) Research project (Task 9): ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Research project (Task 10): ''Study of Cuttings Transport with Aerated Mud Under Elevated Pressure and Temperature Conditions'', (g) Research on instrumentation tasks to measure: Cuttings concentration and distribution in a flowing slurry (Task 11), and Foam properties while transporting cuttings. (Task 12), (h) Development of a Safety program for the ACTS Flow Loop. Progress on a comprehensive safety review of all flow-loop components and operational procedures. (Task 1S). (i) Activities towards technology transfer and developing contacts with Petroleum and service company members, and increasing the number of JIP members. The tasks Completed During This Quarter are Task 7 and Task 8.

  3. Theoretical Models for Orthogonal Cutting

    DEFF Research Database (Denmark)

    De Chiffre, Leonardo

    This review of simple models for orthogonal cutting was extracted from: “L. De Chiffre: Metal Cutting Mechanics and Applications, D.Sc. Thesis, Technical University of Denmark, 1990.”......This review of simple models for orthogonal cutting was extracted from: “L. De Chiffre: Metal Cutting Mechanics and Applications, D.Sc. Thesis, Technical University of Denmark, 1990.”...

  4. Technique for laparoscopic autonomic nerve preserving total mesorectal excision.

    Science.gov (United States)

    Breukink, S O; Pierie, J P E N; Hoff, C; Wiggers, T; Meijerink, W J H J

    2006-05-01

    With the introduction of total mesorectal excision (TME) for treatment of rectal cancer, the prognosis of patients with rectal cancer is improved. With this better prognosis, there is a growing awareness about the quality of life of patients after rectal carcinoma. Laparoscopic total mesorectal excision (LTME) for rectal cancer offers several advantages in comparison with open total mesorectal excision (OTME), including greater patient comfort and an earlier return to daily activities while preserving the oncologic radicality of the procedure. Moreover, laparoscopy allows good exposure of the pelvic cavity because of magnification and good illumination. The laparoscope seems to facilitate pelvic dissection including identification and preservation of critical structures such as the autonomic nervous system. The technique for laparoscopic autonomic nerve preserving total mesorectal excision is reported. A three- or four-port technique is used. Vascular ligation, sharp mesorectal dissection and identification and preservation of the autonomic pelvic nerves are described.

  5. Nuclear translocation contributes to regulation of DNA excision repair activities

    DEFF Research Database (Denmark)

    Knudsen, Nina Østergaard; Andersen, Sofie Dabros; Lützen, Anne

    2009-01-01

    for regulation of nuclear import that is necessary for proper localization of the repair proteins. This review summarizes the current knowledge on nuclear import mechanisms of DNA excision repair proteins and provides a model that categorizes the import by different mechanisms, including classical nuclear import......DNA mutations are circumvented by dedicated specialized excision repair systems, such as the base excision repair (BER), nucleotide excision repair (NER), and mismatch repair (MMR) pathways. Although the individual repair pathways have distinct roles in suppressing changes in the nuclear DNA......, it is evident that proteins from the different DNA repair pathways interact [Y. Wang, D. Cortez, P. Yazdi, N. Neff, S.J. Elledge, J. Qin, BASC, a super complex of BRCA1-associated proteins involved in the recognition and repair of aberrant DNA structures, Genes Dev. 14 (2000) 927-939; M. Christmann, M...

  6. Development of excise on automotive fuels in the neighbouring countries

    International Nuclear Information System (INIS)

    Bleijenberg, A.N.; Janse, P.

    1994-04-01

    The political options for the Netherlands to implement the pricing policy for road traffic by means of an increase of excise, as formulated in the Second Transport Structure Plan (SVV-2), are limited by the excise level in neighbouring countries. Therefore, a study on the title subject has been carried out. First, an overview is given of the historical development of sales prices since 1980 for Belgium, Germany, Luxembourg and France with special attention for the large price differences. Next, insight into the effects of a price difference at the borders is given. Subsequently the development in the policy of the European Union with regard to harmonization of excise tariffs is discussed. Environmental organizations in Belgium and Luxembourg were contacted to learn about the expected development of excises in those countries. 5 figs., 6 tabs., 4 appendices, 10 refs

  7. Impacts of restructuring tabacco excise tax in the Philippines

    International Development Research Centre (IDRC) Digital Library (Canada)

    A recently approved law restructuring tobacco taxes in the. Philippines includes a steep increase in the excise tax (the tax paid by producers which ... part of Canada's International Development Research Centre. (IDRC), a Canadian Crown ...

  8. Comparison between preoperative biopsy and post-excision ...

    African Journals Online (AJOL)

    Comparison between preoperative biopsy and post-excision histology results in sarcoma: Experience at Chris Hani Baragwanath Academic Hospital, Johannesburg, South Africa. KG Panda, MJ Hale, D Kruger, TE Luvhengo ...

  9. Excision of Mucocele Using Diode Laser in Lower Lip

    Directory of Open Access Journals (Sweden)

    Subramaniam Ramkumar

    2016-01-01

    Full Text Available Mucoceles are nonneoplastic cystic lesions of major and minor salivary glands which result from the accumulation of mucus. These lesions are most commonly seen in children. Though usually these lesions can be treated by local surgical excision, in our case, to avoid intraoperative surgical complications like bleeding and edema and to enable better healing, excision was done using a diode laser in the wavelength of 940 nm.

  10. Determining Factors for Fast Corneal Sensitivity Recovery After Pterygium Excision

    OpenAIRE

    Julio Morán, Gemma; Campos, Pamela; Pujol Vives, Pere; Munguia, Aitana; Mas Aixalà, Enric

    2016-01-01

    Purpose: To establish determining factors for fast corneal sensitivity (CS) recovery after pterygium excision. Methods: Thirty-two eyes of 14 males and 18 females with primary nasal pterygium were recruited. Differences in CS (in the 4 quadrants and the center using a Cochet–Bonnet esthesiometer), pterygium corneal area (PCA), tear osmolarity, tear break-up time, Schirmer test, and ocular symptoms were analyzed before and 1 month after lesion excision. The relationship between CS recovery...

  11. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Stefan Miska; Troy Reed; Ergun Kuru

    2004-09-30

    The Advanced Cuttings Transport Study (ACTS) was a 5-year JIP project undertaken at the University of Tulsa (TU). The project was sponsored by the U.S. Department of Energy (DOE) and JIP member companies. The objectives of the project were: (1) to develop and construct a new research facility that would allow three-phase (gas, liquid and cuttings) flow experiments under ambient and EPET (elevated pressure and temperature) conditions, and at different angle of inclinations and drill pipe rotation speeds; (2) to conduct experiments and develop a data base for the industry and academia; and (3) to develop mechanistic models for optimization of drilling hydraulics and cuttings transport. This project consisted of research studies, flow loop construction and instrumentation development. Following a one-year period for basic flow loop construction, a proposal was submitted by TU to the DOE for a five-year project that was organized in such a manner as to provide a logical progression of research experiments as well as additions to the basic flow loop. The flow loop additions and improvements included: (1) elevated temperature capability; (2) two-phase (gas and liquid, foam etc.) capability; (3) cuttings injection and removal system; (4) drill pipe rotation system; and (5) drilling section elevation system. In parallel with the flow loop construction, hydraulics and cuttings transport studies were preformed using drilling foams and aerated muds. In addition, hydraulics and rheology of synthetic drilling fluids were investigated. The studies were performed under ambient and EPET conditions. The effects of temperature and pressure on the hydraulics and cuttings transport were investigated. Mechanistic models were developed to predict frictional pressure loss and cuttings transport in horizontal and near-horizontal configurations. Model predictions were compared with the measured data. Predominantly, model predictions show satisfactory agreements with the measured data. As a

  12. Alcohol Advertising

    OpenAIRE

    Trkovská, Jana

    2017-01-01

    The thesis concerns itself with alcohol advertising. Alcohol is the most widespread habit-forming substance, yet its consumption is permitted in most countries all around the world, possibly restricted by the age of consumers only. Drinking alcohol cannot be either regulated or prohibited today. It has become commonplace for the majority of our lives. Being aware of its apparent risks, however, there is an effort to regulate at least alcohol advertising. The main objective of this work was to...

  13. Genomic island excisions in Bordetella petrii

    Directory of Open Access Journals (Sweden)

    Levillain Erwan

    2009-07-01

    Full Text Available Abstract Background Among the members of the genus Bordetella B. petrii is unique, since it is the only species isolated from the environment, while the pathogenic Bordetellae are obligately associated with host organisms. Another feature distinguishing B. petrii from the other sequenced Bordetellae is the presence of a large number of mobile genetic elements including several large genomic regions with typical characteristics of genomic islands collectively known as integrative and conjugative elements (ICEs. These elements mainly encode accessory metabolic factors enabling this bacterium to grow on a large repertoire of aromatic compounds. Results During in vitro culture of Bordetella petrii colony variants appear frequently. We show that this variability can be attributed to the presence of a large number of metastable mobile genetic elements on its chromosome. In fact, the genome sequence of B. petrii revealed the presence of at least seven large genomic islands mostly encoding accessory metabolic functions involved in the degradation of aromatic compounds and detoxification of heavy metals. Four of these islands (termed GI1 to GI3 and GI6 are highly related to ICEclc of Pseudomonas knackmussii sp. strain B13. Here we present first data about the molecular characterization of these islands. We defined the exact borders of each island and we show that during standard culture of the bacteria these islands get excised from the chromosome. For all but one of these islands (GI5 we could detect circular intermediates. For the clc-like elements GI1 to GI3 of B. petrii we provide evidence that tandem insertion of these islands which all encode highly related integrases and attachment sites may also lead to incorporation of genomic DNA which originally was not part of the island and to the formation of huge composite islands. By integration of a tetracycline resistance cassette into GI3 we found this island to be rather unstable and to be lost from

  14. Transcriptomic analysis reveals ethylene as stimulator and auxin as regulator of adventitious root formation in petunia cuttings

    OpenAIRE

    Druege, Uwe; Franken, Philipp; Lischewski, Sandra; Ahkami, Amir H.; Zerche, Siegfried; Hause, Bettina; Hajirezaei, Mohammad R.

    2014-01-01

    Adventitious root (AR) formation in the stem base of cuttings is the basis for propagation of many plant species and petunia is used as model to study this developmental process. Following AR formation from 2 to 192 hours after excision (hpe) of cuttings, transcriptome analysis by microarray revealed a change of the character of the rooting zone from stem base to root identity. The greatest shift in the number of differentially expressed genes was observed between 24 and 72 hpe, when the cate...

  15. The diagnostic capability of laser induced fluorescence in the characterization of excised breast tissues

    Science.gov (United States)

    Galmed, A. H.; Elshemey, Wael M.

    2017-08-01

    Differentiating between normal, benign and malignant excised breast tissues is one of the major worldwide challenges that need a quantitative, fast and reliable technique in order to avoid personal errors in diagnosis. Laser induced fluorescence (LIF) is a promising technique that has been applied for the characterization of biological tissues including breast tissue. Unfortunately, only few studies have adopted a quantitative approach that can be directly applied for breast tissue characterization. This work provides a quantitative means for such characterization via introduction of several LIF characterization parameters and determining the diagnostic accuracy of each parameter in the differentiation between normal, benign and malignant excised breast tissues. Extensive analysis on 41 lyophilized breast samples using scatter diagrams, cut-off values, diagnostic indices and receiver operating characteristic (ROC) curves, shows that some spectral parameters (peak height and area under the peak) are superior for characterization of normal, benign and malignant breast tissues with high sensitivity (up to 0.91), specificity (up to 0.91) and accuracy ranking (highly accurate).

  16. Jasmonates act positively in adventitious root formation in petunia cuttings.

    Science.gov (United States)

    Lischweski, Sandra; Muchow, Anne; Guthörl, Daniela; Hause, Bettina

    2015-09-22

    Petunia is a model to study the process of adventitious root (AR) formation on leafy cuttings. Excision of cuttings leads to a transient increase in jasmonates, which is regarded as an early, transient and critical event for rooting. Here, the role of jasmonates in AR formation on petunia cuttings has been studied by a reverse genetic approach. To reduce the endogenous levels of jasmonates, transgenic plants were generated expressing a Petunia hybrida ALLENE OXIDE CYCLASE (PhAOC)-RNAi construct. The transgenic plants exhibited strongly reduced PhAOC transcript and protein levels as well as diminished accumulation of cis-12-oxo-phytodienoic acid, jasmonic acid and jasmonoyl-isoleucine after wounding in comparison to wild type and empty vector expressing plants. Reduced levels of endogenous jasmonates resulted in formation of lower numbers of ARs. However, this effect was not accompanied by altered levels of auxin and aminocyclopropane carboxylate (ACC, precursor of ethylene) or by impaired auxin and ethylene-induced gene expression. Neither activity of cell-wall invertases nor accumulation of soluble sugars was altered by jasmonate deficiency. Diminished numbers of AR in JA-deficient cuttings suggest that jasmonates act as positive regulators of AR formation in petunia wild type. However, wound-induced rise in jasmonate levels in petunia wild type cuttings seems not to be causal for increased auxin and ethylene levels and for sink establishment.

  17. Skin Cut Construction

    DEFF Research Database (Denmark)

    2017-01-01

    of the exhibition is to create a connection between the artistic and technological development through Danish rms and researchers who represent the newest technology in concrete treatment. The rst part exhibition (skin) will focus on the surface treatment of concrete (’graphical concrete’), the second (cut...

  18. Cutting Cakes Carefully

    Science.gov (United States)

    Hill, Theodore P.; Morrison, Kent E.

    2010-01-01

    This paper surveys the fascinating mathematics of fair division, and provides a suite of examples using basic ideas from algebra, calculus, and probability which can be used to examine and test new and sometimes complex mathematical theories and claims involving fair division. Conversely, the classical cut-and-choose and moving-knife algorithms…

  19. Classroom Cut Ups

    Science.gov (United States)

    Lord, Stacy

    2011-01-01

    Discovering identity can be a lifelong challenge for some people, while others seem to figure it out right away. During the middle school years, finding one's identity can be a daunting task. Most students will spend a considerable amount of time during these middle years looking for it. This lesson on cut-paper self-portraits lets students delve…

  20. Abrasive water jet cutting

    International Nuclear Information System (INIS)

    Leist, K.J.; Funnell, G.J.

    1988-01-01

    In the process of selecting a failed equipment cut-up tool for the process facility modifications (PFM) project, a system using an abrasive water jet (AWJ) was developed and tested for remote disassembly of failed equipment. It is presented in this paper

  1. After the Ribbon Cutting

    DEFF Research Database (Denmark)

    Hodge, Graeme A.; Boulot, Emille; Duffield, Colin

    2017-01-01

    Much attention has gone towards ‘up-front’ processes when delivering infrastructure public–private partnerships (PPPs), but less on how to best govern after the ribbon is cut and the infrastructure built. This paper identifies the primary contractual and institutional governance challenges arising...

  2. Simultaneous Cake Cutting

    DEFF Research Database (Denmark)

    Balkanski, Eric; Branzei, Simina; Kurokawa, David

    2014-01-01

    We introduce the simultaneous model for cake cutting (the fair allocation of a divisible good), in which agents simultaneously send messages containing a sketch of their preferences over the cake. We show that this model enables the computation of divisions that satisfy proportionality — a popular...

  3. Current practice and feasibility in microlaryngeal surgery: microsurgical pressing excision technique.

    Science.gov (United States)

    Lee, Ka-Wo; Chiang, Feng-Yu

    2009-12-01

    Since the introduction of endolaryngeal microsurgery, several basic microsurgical techniques have been described for the removal of benign vocal fold lesions. These techniques include conventional incision or dissection, bimanual retraction and cutting, microflap technique and the CO2 laser. Until recently, only a few microsurgical methods have emerged as new choices for the treatment of benign vocal fold lesions. This article introduces an innovative method that can precisely remove benign sessile vocal fold lesions with epithelial keratosis or hyperplasia without jeopardizing the intermediate or deep layer of the lamina propria. Instead of using conventional vertically opening microinstruments, this microsurgical pressing excision technique (MPET) utilized two pairs of custom-made horizontally left-opening or right-opening, curved microscissors/curved cupped microforceps to remove right or left vocal fold lesions accordingly. Using one instrument at a time, the lesion was subsequently removed with the microscissors and microforceps in a press-evert-cut manner. Among a total of 553 cases, the treatment results were satisfactory, with 520 (94%) patients retaining a satisfactory/normal (G0) voice 2 months postoperatively. More importantly, no patient's voice was worse postoperatively. This technique has several advantages: utilizing one instrument at a time can maximize exposure of the narrow endoscopic view, adjusting the pressing force makes precise excision easy in a well controlled horizontal plane. The MPET is particularly useful for removing sessile vocal nodules (especially those with epithelial keratosis), epithelial hyperplasia and leukoplakia in patients with difficult endolaryngeal exposure. This could be a well tolerated and precise microsurgical technique.

  4. Alcoholic fermentation

    Energy Technology Data Exchange (ETDEWEB)

    Colin, P

    1961-01-04

    The addition of C/sub 6-10/ alcohols to the fermenting sugar solutions, increased the yield of alcohol by 1.5 to 5%. The best additives were (additive, % additive in sugar solution, % increased in yield of alcohol): hexanol, 0.03, 2.5; heptanol, 0.05, 3; nonanol, 0.01, 3; 2-ethylbutanol, 0.05, 4; 2-ethylhexanol, 0.05, 5; a mixture of C/sub 7-9/ alcohols from the Oxo synthesis, 0.05, 4.5, and a mixture of C/sub 10/ alcohols 0.05, 3.

  5. Core Cutting Test with Vertical Rock Cutting Rig (VRCR)

    Science.gov (United States)

    Yasar, Serdar; Osman Yilmaz, Ali

    2017-12-01

    Roadheaders are frequently used machines in mining and tunnelling, and performance prediction of roadheaders is important for project economics and stability. Several methods were proposed so far for this purpose and, rock cutting tests are the best choice. Rock cutting tests are generally divided into two groups which are namely, full scale rock cutting tests and small scale rock cutting tests. These two tests have some superiorities and deficiencies over themselves. However, in many cases, where rock sampling becomes problematic, small scale rock cutting test (core cutting test) is preferred for performance prediction, since small block samples and core samples can be conducted to rock cutting testing. Common problem for rock cutting tests are that they can be found in very limited research centres. In this study, a new mobile rock cutting testing equipment, vertical rock cutting rig (VRCR) was introduced. Standard testing procedure was conducted on seven rock samples which were the part of a former study on cutting rocks with another small scale rock cutting test. Results showed that core cutting test can be realized successfully with VRCR with the validation of paired samples t-test.

  6. 29 CFR 779.262 - Excise taxes at the retail level.

    Science.gov (United States)

    2010-07-01

    ... AS APPLIED TO RETAILERS OF GOODS OR SERVICES Employment to Which the Act May Apply; Enterprise Coverage Excise Taxes § 779.262 Excise taxes at the retail level. (a) Federal excise taxes are imposed at... 29 Labor 3 2010-07-01 2010-07-01 false Excise taxes at the retail level. 779.262 Section 779.262...

  7. Some possibilities for determining cutting data when using laser cutting:

    OpenAIRE

    Radovanović, Miroslav

    2006-01-01

    The technological problems faced in the field of the application of laser-cutting machines lie in insufficient knowledge of the laser technique and the absence of both sufficiently reliable practical data and knowledge about the parameters affecting the work process itself. A significant parameter that is necessary to determine and to enter in an NC-program is the cutting speed. Various authors analyze the laser-cutting process and give mathematical models where laser cutting is modeled by us...

  8. Cutting to the chase

    International Nuclear Information System (INIS)

    Snieckus, D.

    2001-01-01

    This article reports on the development of the cost effective abrasive cutting Sabre system which came as a result of UWG's work on the decommissioning of the Phillips' Maureen wells and adds to UWG's 'total severance solution' tools. The advantages of the system are highlighted and include the ability to operate from a platform or diving support vessel, to cut internal cases, and to eliminate the use of environmentally damaging explosives and the need to operate from a rig. The new Mark II version of the Sabre designed to work at greater depths of water, the range of the severance tools, UWG's well abandonment hole assembly system, and its aim to enter the Gulf of Mexico market are discussed. Details are given of the decommissioning of the Schwedeneck-See platforms in Kiel Bay off Germany and the Phillips' UK decommissioning plans for the Maureen platform

  9. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Ergun Kuru; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Mark Pickell; Len Volk; Mike Volk; Barkim Demirdal; Affonso Lourenco; Evren Ozbayoglu; Paco Vieira; Neelima Godugu

    2000-07-30

    ACTS flow loop is now operational under elevated pressure and temperature. Currently, experiments with synthetic based drilling fluids under pressure and temperature are being conducted. Based on the analysis of Fann 70 data, empirical correlations defining the shear stress as a function of temperature, pressure and the shear rate have been developed for Petrobras synthetic drilling fluids. PVT equipment has been modified for testing Synthetic oil base drilling fluids. PVT tests with Petrobras Synthetic base mud have been conducted and results are being analyzed Foam flow experiments have been conducted and the analysis of the data has been carried out to characterize the rheology of the foam. Comparison of pressure loss prediction from the available foam hydraulic models and the test results has been made. Cuttings transport experiments in horizontal annulus section have been conducted using air, water and cuttings. Currently, cuttings transport tests in inclined test section are being conducted. Foam PVT analysis tests have been conducted. Foam stability experiments have also been conducted. Effects of salt and oil concentration on the foam stability have been investigated. Design of ACTS flow loop modification for foam and aerated mud flow has been completed. A flow loop operation procedure for conducting foam flow experiments under EPET conditions has been prepared Design of the lab-scale flow loop for dynamic foam characterization and cuttings monitoring instrumentation tests has been completed. The construction of the test loop is underway. As part of the technology transport efforts, Advisory Board Meeting with ACTS-JIP industry members has been organized on May 13, 2000.

  10. Making the cut

    Energy Technology Data Exchange (ETDEWEB)

    Mcshannon, G. [Hydra Mining Tools International Ltd. (United Kingdom)

    2006-04-15

    The paper explains how coal mines around the world can benefit from the use of cowless, radial shearer drums. Hydra Mining has designed and manufactured a range of shearer drums to combat problems ranging from dust, frictional ignitions, geological problems or low production rates. This allows the mine operator to maximise production efficiency. The company tailor-makes shearer drums for each longwall face to optimise the cutting performance of every installation. 8 figs.

  11. Cutting Out Continuations

    DEFF Research Database (Denmark)

    Bahr, Patrick; Hutton, Graham

    2016-01-01

    In the field of program transformation, one often transforms programs into continuation-passing style to make their flow of control explicit, and then immediately removes the resulting continuations using defunctionalisation to make the programs first-order. In this article, we show how these two...... transformations can be fused together into a single transformation step that cuts out the need to first introduce and then eliminate continuations. Our approach is calculational, uses standard equational reasoning techniques, and is widely applicable....

  12. Cutting forces during turning with variable depth of cut

    Directory of Open Access Journals (Sweden)

    M. Sadílek

    2016-03-01

    The proposed research for the paper is an experimental work – measuring cutting forces and monitoring of the tool wear on the cutting edge. It compares the turning where standard roughing cycle is used and the turning where the proposed roughing cycle with variable depth of cut is applied.

  13. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Ergun Kuru; Stefan Miska; Nicholas Takach; Kaveh Ashenayi; Gerald Kane; Len Volk; Mark Pickell; Evren Ozbayoglu; Barkim Demirdal; Paco Vieira; Affonso Lourenco

    1999-10-15

    This report includes a review of the progress made in ACTF Flow Loop development and research during 90 days pre-award period (May 15-July 14, 1999) and the following three months after the project approval date (July15-October 15, 1999) The report presents information on the following specific subjects; (a) Progress in Advanced Cuttings Transport Facility design and development, (b) Progress report on the research project ''Study of Flow of Synthetic Drilling Fluids Under Elevated Pressure and Temperature Conditions'', (c) Progress report on the research project ''Study of Cuttings Transport with Foam Under LPAT Conditions (Joint Project with TUDRP)'', (d) Progress report on the research project ''Study of Cuttings Transport with Aerated Muds Under LPAT Conditions (Joint Project with TUDRP)'', (e) Progress report on the research project ''Study of Foam Flow Behavior Under EPET Conditions'', (f) Progress report on the instrumentation tasks (Tasks 11 and 12) (g) Activities towards technology transfer and developing contacts with oil and service company members.

  14. Vortex cutting in superconductors

    Science.gov (United States)

    Vlasko-Vlasov, Vitalii K.; Koshelev, Alexei E.; Glatz, Andreas; Welp, Ulrich; Kwok, Wai-K.

    2015-03-01

    Unlike illusive magnetic field lines in vacuum, magnetic vortices in superconductors are real physical strings, which interact with the sample surface, crystal structure defects, and with each other. We address the complex and poorly understood process of vortex cutting via a comprehensive set of magneto-optic experiments which allow us to visualize vortex patterns at magnetization of a nearly twin-free YBCO crystal by crossing magnetic fields of different orientations. We observe a pronounced anisotropy in the flux dynamics under crossing fields and the filamentation of induced supercurrents associated with the staircase vortex structure expected in layered cuprates, flux cutting effects, and angular vortex instabilities predicted for anisotropic superconductors. At some field angles, we find formation of the vortex domains following a type-I phase transition in the vortex state accompanied by an abrupt change in the vortex orientation. To clarify the vortex cutting scenario we performed time-dependent Ginzburg-Landau simulations, which confirmed formation of sharp vortex fronts observed in the experiment and revealed a left-handed helical instability responsible for the rotation of vortices. This work was supported by the U.S. Department of Energy, Office of Science, Materials Sciences and Engineering Division.

  15. The effect of alcohol price on dependent drinkers' alcohol consumption.

    Science.gov (United States)

    Falkner, Carolyn; Christie, Grant; Zhou, Lifeng; King, Julian

    2015-12-18

    To investigate the current purchasing behaviours of a group of dependent drinkers and their potential response to future increases in the price of alcohol. 115 clients undergoing medical detoxification completed an anonymous survey about their daily alcohol consumption, its cost, their response to potential price increases and strategies previously used when unable to afford alcohol. Mean and median number of standard drinks consumed per day was 24, at a median cost of $25 NZD (95%CI $22, $30). Thirty-six per cent (95%CI 26%, 46%) of the group bought alcohol at $1 or less per standard drink, and the median number of drinks consumed per day (30) by this group was significantly higher (p=0.0028) than the rest of the sample (22.5). The most common strategy used if no money was available to purchase alcohol was to forgo essentials. If facing a potential price rise, 77% (95%CI 69%, 85%) would switch wholly or partially to a cheaper product and 13% (95%CI 8%, 21%) would cut down their drinking. Although the majority of our group would be financially impacted by an increase in the minimum price per standard drink, any potential impacts would be most significant in those buying the cheapest alcohol (who also drink the most), suggesting that minimum pricing may be an important harm minimisation strategy in this group. A minimum price per standard drink would limit the possibility of switching to an alternate cheaper product and likely result in an overall reduction in alcohol consumption in this group. Stealing alcohol, or the use of non-beverage alcohol, were seldom reported as previous strategies used in response to unaffordable alcohol and fears of such are not valid reasons for rejecting minimum pricing to reduce general population consumption.

  16. Uracil excision repair in Mycobacterium tuberculosis cell-free extracts.

    Science.gov (United States)

    Kumar, Pradeep; Bharti, Sanjay Kumar; Varshney, Umesh

    2011-05-01

    Uracil excision repair is ubiquitous in all domains of life and initiated by uracil DNA glycosylases (UDGs) which excise the promutagenic base, uracil, from DNA to leave behind an abasic site (AP-site). Repair of the resulting AP-sites requires an AP-endonuclease, a DNA polymerase, and a DNA ligase whose combined activities result in either short-patch or long-patch repair. Mycobacterium tuberculosis, the causative agent of tuberculosis, has an increased risk of accumulating uracils because of its G + C-rich genome, and its niche inside host macrophages where it is exposed to reactive nitrogen and oxygen species, two major causes of cytosine deamination (to uracil) in DNA. In vitro assays to study DNA repair in this important human pathogen are limited. To study uracil excision repair in mycobacteria, we have established assay conditions using cell-free extracts of M. tuberculosis and M. smegmatis (a fast-growing mycobacterium) and oligomer or plasmid DNA substrates. We show that in mycobacteria, uracil excision repair is completed primarily via long-patch repair. In addition, we show that M. tuberculosis UdgB, a newly characterized family 5 UDG, substitutes for the highly conserved family 1 UDG, Ung, thereby suggesting that UdgB might function as backup enzyme for uracil excision repair in mycobacteria. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. Estimated impacts of alternative Australian alcohol taxation structures on consumption, public health and government revenues.

    Science.gov (United States)

    Doran, Christopher M; Byrnes, Joshua M; Cobiac, Linda J; Vandenberg, Brian; Vos, Theo

    2013-11-04

    To examine health and economic implications of modifying taxation of alcohol in Australia. Economic and epidemiological modelling of four scenarios for changing the current taxation of alcohol products, including: replacing the wine equalisation tax (WET) with a volumetric tax; applying an equal tax rate to all beverages equivalent to a 10% increase in the current excise applicable to spirits and ready-to-drink products; applying an excise tax rate that increases exponentially by 3% for every 1% increase in alcohol content above 3.2%; and applying a two-tiered volumetric tax. We used annual sales data and taxation rates for 2010 as the base case. Alcohol consumption, taxation revenue, disability-adjusted life-years (DALYs) averted and health care costs averted. In 2010, the Australian Government collected close to $8.6 billion from alcohol taxation. All four of the proposed variations to current rates of alcohol excise were shown to save money and more effectively reduce alcohol-related harm compared with the 2010 base case. Abolishing the WET and replacing it with a volumetric tax on wine would increase taxation revenue by $1.3 billion per year, reduce alcohol consumption by 1.3%, save $820 million in health care costs and avert 59 000 DALYs. The alternative scenarios would lead to even higher taxation receipts and greater reductions in alcohol use and harm. Our research findings suggest that any of the proposed variations to current rates of alcohol excise would be a cost-effective health care intervention; they thus reinforce the evidence that taxation is a cost-effective strategy. Of all the scenarios, perhaps the most politically feasible policy option at this point in time is to abolish the WET and replace it with a volumetric tax on wine. This analysis supports the recommendation of the National Preventative Health Taskforce and the Henry Review towards taxing alcohol according to alcohol content.

  18. Performance Testing of Cutting Fluids

    DEFF Research Database (Denmark)

    Belluco, Walter

    The importance of cutting fluid performance testing has increased with documentation requirements of new cutting fluid formulations based on more sustainable products, as well as cutting with minimum quantity of lubrication and dry cutting. Two sub-problems have to be solved: i) which machining...... tests feature repeatability, reproducibility and sensitivity to cutting fluids, and ii) to what extent results of one test ensure relevance to a wider set of machining situations. The present work is aimed at assessing the range of validity of the different testing methods, investigating correlation...... within the whole range of operations, materials, cutting fluids, operating conditions, etc. Cutting fluid performance was evaluated in turning, drilling, reaming and tapping, and with respect to tool life, cutting forces, chip formation and product quality (dimensional accuracy and surface integrity...

  19. CALCULATION OF LASER CUTTING COSTS

    OpenAIRE

    Bogdan Nedic; Milan Eric; Marijana Aleksijevic

    2016-01-01

    The paper presents description methods of metal cutting and calculation of treatment costs based on model that is developed on Faculty of mechanical engineering in Kragujevac. Based on systematization and analysis of large number of calculation models of cutting with unconventional methods, mathematical model is derived, which is used for creating a software for calculation costs of metal cutting. Software solution enables resolving the problem of calculating the cost of laser cutting, compar...

  20. The possible impact of an alcohol welfare surcharge on consumption of alcoholic beverages in Taiwan.

    Science.gov (United States)

    Yeh, Chun-Yuan; Ho, Li-Ming; Lee, Jie-Min; Hwang, Jhe-Yo

    2013-09-08

    The abuse of alcoholic beverages leads to numerous negative consequences in Taiwan, as around the world. Alcohol abuse not only contributes to cardiovascular disease, hypertension, diabetes and cancer, but it is also an underlying cause of many other serious problems, such as traffic accidents, lost productivity, and domestic violence. International leaders in health policy are increasingly using taxation as an effective tool with which to lower alcohol consumption. In this study, we assessed how consumption patterns in Taiwan would be affected by levying a welfare surcharge on alcoholic beverages of 20%, 40% or 60% in accordance with the current excise tax. We also assessed the medical savings Taiwan would experience if consumption of alcoholic beverages were to decrease and how much additional revenue a welfare surcharge would generate. We estimated the elasticity of four types of alcoholic beverages (beer, wine, whisky and brandy) using the Central Bureau of Statistics (CBS) Demand Model. Specifically, we estimated alcohol's price elasticity by analyzing the sales prices and time statistics of these products from 1974 to 2009. Alcoholic beverages in Taiwan have the following price elasticities: beer (-0.820), wine (-0.955), whisky (-0.587), brandy (-0.958). A welfare surcharge tax of 40% in accordance with the excise tax would decrease overall consumption of beer, wine, whisky and brandy between 16.24% and 16.42%. It would also generate New Taiwan Dollar (NT$) revenues of 5.782 billion to 5.993 billion. Savings in medical costs would range from NT$871.07 million to NT$897.46 million annually. A social and welfare surcharge of 40% on alcoholic beverages in Taiwan would successfully lower consumption rates, decrease medical costs, and generate revenue that could be used to educate consumers and further decrease consumption rates. Consequently, we strongly recommend that such a tax be imposed in Taiwan.

  1. Remote Laser Cutting of CFRP: Improvements in the Cut Surface

    Science.gov (United States)

    Stock, Johannes; Zaeh, Michael F.; Conrad, Markus

    In the automotive industry carbon fibre reinforced plastics (CFRP) are considered as a future key material to reduce the weight of the vehicle. Therefore, capable production techniques are required to process this material in mass industry. E.g., state of the art methods for cutting are limited by the high tool wear or the feasible feed rate. Laser cutting processes are still under investigation. This paper presents detailed new studies on remote laser cutting of CFRP focusing on the influence of the material properties and the quality of the cut surface. By adding light absorbing soot particles to the resin of the matrix, the cutting process is improved and fewer defects emerge.

  2. Total excision of intramedullary epidermoid cyst in one case

    Directory of Open Access Journals (Sweden)

    PU Ke

    2013-12-01

    Full Text Available Clinical experience of total excision in a 14-year-old female with intramedullary epidermoid cyst was reported. The patient with L3-4 intramedullary epidermoid cyst underwent total excision through posterior median approach under microscopy. The patient was admitted for progressive strephexopodia and urinary and fecal incontinence. Preoperative imaging examination showed scoliosis, incontionous L4-S1 and abnormal signal of L3-4. Total excision and spinal remodeling were performed under intraoperative neurophysiological monitoning. Epidermoid cyst and its membrane were totally removed without aseptic meningitis after surgery, and the neurologic symptoms of the patient were gradually improved. Completely removing the membrane of epidermoid cyst is the key point to prevent recurrence and aseptic meningitis postoperatively. Dissection should be strictly in accordance with the boundaries of the membrane and the spinal cord, in order to avoid spinal cord injury.

  3. Excision of oral mucocele by different wavelength lasers

    Directory of Open Access Journals (Sweden)

    Umberto Romeo

    2013-01-01

    Full Text Available Background: Mucocele is a common benign neoplasm of oral soft tissues and the most common after fibroma. It generally occurs in the lower lip and its treatment includes excision of cyst and the responsible salivary gland, in order to prevent recurrences. Aims: To evaluate the capability of three different lasers in performing the excision of labial mucocele with two different techniques. Materials and Methods: In the presented cases, excision was performed using two different techniques (circumferential incision technique and mucosal preservation technique and three different laser wavelengths (Er,Cr:YSGG 2780 nm, diode 808 nm, and KTP 532 nm. Results: All the tested lasers, regardless of wavelength, showed many advantages (bloodless surgical field, no postoperative pain, relative speed, and easy execution. The most useful surgical technique depends on clinical features of the lesion. Conclusion: Tested lasers, with both techniques, are helpful in the management of labial mucocele.

  4. CELL POPULATION KINETICS OF EXCISED ROOTS OF PISUM SATIVUM

    Science.gov (United States)

    Van't Hof, Jack

    1965-01-01

    The cell population kinetics of excised, cultured pea roots was studied with the use of tritiated thymidine and colchicine to determine (1) the influence of excision, (2) the influence of sucrose concentration, (3) the average mitotic cycle duration, and (4) the duration of mitosis and the G 1, S, and G 2 periods of interphase.1 The results indicate that the process of excision causes a drop in the frequency of mitotic figures when performed either at the beginning of the culture period or after 100 hours in culture. This initial decrease in frequency of cell division is independent of sucrose concentration, but the subsequent rise in frequency of division, after 12 hours in culture, is dependent upon sucrose concentration. Two per cent sucrose maintains the shortest mitotic cycle duration. The use of colchicine indicated an average cycle duration of 20 hours, whereas the use of tritiated thymidine produced an average cycle duration of 17 hours. PMID:5857253

  5. Cutting agents for special metals

    International Nuclear Information System (INIS)

    Sugito, Seiji; Sakakibara, Fumi

    1979-01-01

    The quantity of use of special metals has increased year after year in the Plasma Research Institute, Nagoya University, with the development of researches on plasma and nuclear fusion. Most of these special metals are hard to cut, and in order to secure the surface smoothness and dimensional accuracy, considerable efforts are required. The method of experiment is as follows: cutting agents salt water and acetone, rape-seed oil, sulfide and chloride oil and water soluble cutting oil W grade 3; metals to be cut niobium, molybdenum, tantalum, titanium and tungsten; cutting conditions cutting speed 4.7 to 90 m/min, feed 0.07 to 0.2 mm/rev, depth of cut 0.1 to 0.4 mm, tool cemented carbide bit. Chemicals such as tetrachloromethane and trichloroethane give excellent cutting performance, but the toxicity is intense and the stimulative odor exists, accordingly they are hard to use practically. Cutting was easier when the salt water added with acetone was used than the case of rape-seed oil, but salt water is corrosive. Recently, the machining of molybdenum has been often carried out, and the water soluble cutting oil was the best. It is also good for cutting stainless steel, and its lubricating property is improved by adding some additives such as sulfur, chlorine, phosphorus and molybdenum disulfide. However after cutting with it, washing is required. (Kako, I.)

  6. Unrecorded alcohol consumption: its economics and its effects on alcohol control in the Nordic countries.

    Science.gov (United States)

    Nordlund, S; Osterberg, E

    2000-12-01

    The starting point of this paper is the fact that no country has complete records of alcohol consumption. In addition to being a matter or statistical accuracy, unrecorded alcohol also plays an important role in alcohol policy discussions. Furthermore, its quantity is bound to basic economic laws. These latter two aspects are the main interest in this paper, which discusses, first, what is really meant by unrecorded alcohol consumption and what kind of categories are included in it. The next task is to discuss the economics of different categories of unrecorded alcohol and the mechanisms which lead to increases or decreases in them. The examples in this part of the paper come from the Nordic countries. Arguments about increased smuggling and illegal distilling have always been used against alcohol policy restrictions in the Nordic countries. Recently the level of travellers' alcohol imports and border trade have also been used for the same purpose. In the European Union the task to harmonize alcohol excise taxes is partly given to increased travellers' duty-free allowances and market forces. This policy has already led to reductions in alcohol taxation both in Denmark and Sweden.

  7. Union Women, the Tobacco Industry, and Excise Taxes

    Science.gov (United States)

    Balbach, Edith D.; Campbell, Richard B.

    2009-01-01

    Between 1987 and 1997, the tobacco industry used the issue of cigarette excise tax increases to create a political partnership with the Coalition of Labor Union Women (CLUW), a group representing female trade unionists in the U.S. This paper documents how the industry created this relationship and the lessons tobacco-control advocates can learn from the industry’s example, in order to mitigate possible unintended consequences of advocating excise tax increases In 1998, under the terms of the Master Settlement Agreement, the tobacco industry began making documents produced in litigation available publicly. Currently, approximately 50 million pages are available online, including substantial documentation of the industry–CLUW relationship. For this study, a comprehensive search of these documents was conducted. The tobacco industry encouraged CLUW’s opposition to excise tax increases by emphasizing the economic regressivity of these taxes, discussing excise taxes generically to deflect attention from cigarettes, and encouraging opposition to earmarking cigarette taxes to pay for specific programs. In addition, CLUW received at least $221,500 in financial support between 1987 and 1997 and in-kind support for its conferences, membership materials, and other services. Excise tax increases, if pursued without considering the impacts they may have on low-SES populations, may have unintended consequences. In this case, such proposals may have helped to create a relationship between CLUW and the tobacco industry. Because excise taxes are endorsed in the Framework Convention on Tobacco Control, tobacco-control advocates must understand how to build relationships with low-SES populations and mitigate potential alliances with the tobacco industry. PMID:19591750

  8. Black-hole excision with multiple grid patches

    International Nuclear Information System (INIS)

    Thornburg, Jonathan

    2004-01-01

    When using black-hole excision to numerically evolve a black-hole spacetime with no continuous symmetries, most 3 + 1 finite differencing codes use a Cartesian grid. It is difficult to do excision on such a grid because the natural r = constant excision surface must be approximated either by a very different shape such as a contained cube, or by an irregular and non-smooth 'LEGO 1 sphere' which may introduce numerical instabilities into the evolution. In this paper I describe an alternate scheme which uses multiple {r x (angular coordinates)} grid patches, each patch using a different (nonsingular) choice of angular coordinates. This allows excision on a smooth r = constant 2-sphere. I discuss the key design choices in such a multiple-patch scheme, including the choice of ghost-zone versus internal-boundary treatment of the interpatch boundaries (I use a ghost-zone scheme), the number and shape of the patches (I use a 6-patch 'inflated-cube' scheme), the details of how the ghost zones are 'synchronized' by interpolation from neighbouring patches, the tensor basis for the Einstein equations in each patch, and the handling of non-tensor field variables such as the BSSN Γ-tilde i (I use a scheme which requires ghost zones which are twice as wide for the BSSN conformal factor φ as for Γ-tilde i and the other BSSN field variables). I present sample numerical results from a prototype implementation of this scheme. This code simulates the time evolution of the (asymptotically flat) spacetime around a single (excised) black hole, using fourth-order finite differencing in space and time. Using Kerr initial data with J/m 2 = 0.6, I present evolutions to t ∼> 1500m. The lifetime of these evolutions appears to be limited only by outer boundary instabilities, not by any excision instabilities or by any problems inherent to the multiple-patch scheme

  9. Recurred Myofibroblastoma of Breast After Excision: A Case Report

    International Nuclear Information System (INIS)

    Cha, Yoon Ki; Kim, Ji Young; Jeong, Myeong Ja; Kim, Jae Hyung; Kim, Soung Hee; Kim, Soo Hyun; Jun, Woo Sun; Park, Kyeong Mee; Yang, Keun Ho

    2010-01-01

    Myofibroblastoma of the breast is a rare benign mesenchymal tumor that is known to occur in middle-aged and elderly men, yet there are some recent reports showing no certain difference for the gender distribution of this malady. Localized mass excision can usually provide a complete cure. To the best of our knowledge, there have been no reports of metastasis or recurrence of this tumor. Here we describe the sonographic findings of a case of recurrent myofibroblastoma after surgical excision for suspected fibroadenomas in both breasts of a 25-year-old woman

  10. A seventh complementation group in excision-deficient xeroderma pigmentosum

    International Nuclear Information System (INIS)

    Keijzer, W.; Jaspers, N.G.J.; Bootsma, D.; Abrahams, P.J.; Taylor, A.M.R.; Arlett, C.F.; Zelle, B.; Kinmont, P.D.S.

    1979-01-01

    Cells from a xeroderma pigmentosum patient XP2B1 who has reached 17 years of age with no keratoses or skin tumours constitute a new, 7th complementation group G. These cells exhibit a low residual level of excision repair, 2% of normal after a UV dose of 5 J/m 2 and an impairment of post-replication repair characteristic of excision-defective XPs. They are also sensitive to the lethal effects of UV and defective in host-cell reactivation of UV-irradiated SV40 DNA. (Auth.)

  11. Can You Cut It?

    DEFF Research Database (Denmark)

    Kjær, Tina; Lillelund, Christoffer Bredo; Moth-Poulsen, Mie

    2017-01-01

    The advent of affordable virtual reality (VR) displays and 360◦ video cameras has sparked an interest in bringing cinematic experiences from the screen and into VR. However, it remains uncertain whether traditional approaches to filmmaking can be directly applied to cinematic VR. Historically......’ sense of disorientation and their ability to follow the story, during exposure to fictional 360◦ films experienced using a head-mounted display. The results revealed no effects of increased cut frequency which leads us to conclude that editing need not pose a problem in relation to cinematic VR, as long...

  12. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Stefan Miska; Nicholas Takach; Kaveh Ashenayi

    2004-07-31

    We have tested the loop elevation system. We raised the mast to approximately 25 to 30 degrees from horizontal. All went well. However, while lowering the mast, it moved laterally a couple of degrees. Upon visual inspection, severe spalling of the concrete on the face of the support pillar, and deformation of the steel support structure was observed. At this time, the facility is ready for testing in the horizontal position. A new air compressor has been received and set in place for the ACTS test loop. A new laboratory has been built near the ACTS test loop Roughened cups and rotors for the viscometer (RS300) were obtained. Rheologies of aqueous foams were measured using three different cup-rotor assemblies that have different surface roughness. The relationship between surface roughness and foam rheology was investigated. Re-calibration of nuclear densitometers has been finished. The re-calibration was also performed with 1% surfactant foam. A new cuttings injection system was installed at the bottom of the injection tower. It replaced the previous injection auger. A mechanistic model for cuttings transport with aerated mud has been developed. Cuttings transport mechanisms with aerated water at various conditions were experimentally investigated. A total of 39 tests were performed. Comparisons between the model predictions and experimental measurements show a satisfactory agreement. Results from the ultrasonic monitoring system indicated that we could distinguish between different sand levels. We also have devised ways to achieve consistency of performance by securing the sensors in the caps in exactly the same manner as long as the sensors are not removed from the caps. A preliminary test was conducted on the main flow loop at 100 gpm flow rate and 20 lb/min cuttings injection rate. The measured bed thickness using the ultrasonic method showed a satisfactory agreement with nuclear densitometer readings. Thirty different data points were collected after the test

  13. Cutting the Cord-2

    Science.gov (United States)

    2004-01-01

    This animation shows the view from the rear hazard avoidance cameras on the Mars Exploration Rover Spirit as the rover turns 45 degrees clockwise. This maneuver is the first step in a 3-point turn that will rotate the rover 115 degrees to face west. The rover must make this turn before rolling off the lander because airbags are blocking it from exiting from the front lander petal. Before this crucial turn took place, engineers instructed the rover to cut the final cord linking it to the lander. The turn took around 30 minutes to complete.

  14. Cutting the Cord

    Science.gov (United States)

    2004-01-01

    This animation shows the view from the front hazard avoidance cameras on the Mars Exploration Rover Spirit as the rover turns 45 degrees clockwise. This maneuver is the first step in a 3-point turn that will rotate the rover 115 degrees to face west. The rover must make this turn before rolling off the lander because airbags are blocking it from exiting off the front lander petal. Before this crucial turn could take place, engineers instructed the rover to cut the final cord linking it to the lander. The turn took around 30 minutes to complete.

  15. Leptogenesis: The other cuts

    International Nuclear Information System (INIS)

    Garbrecht, Bjoern

    2011-01-01

    For standard leptogenesis from the decay of singlet right-handed neutrinos, we derive source terms for the lepton asymmetry that are present in a finite density background but absent in the vacuum. These arise from cuts through the vertex correction to the decay asymmetry, where in the loop either the Higgs boson and the right-handed neutrino or the left-handed lepton and the right-handed neutrino are simultaneously on-shell. We evaluate the source terms numerically and use them to calculate the lepton asymmetry for illustrative points in parameter space, where we consider only two right-handed neutrinos for simplicity. Compared to calculations where only the standard cut through the propagators of left-handed lepton and Higgs boson is included, sizable corrections arise when the masses of the right-handed neutrinos are of the same order, but the new sources are found to be most relevant when the decaying right-handed neutrino is heavier than the one in the loop. In that situation, they can yield the dominant contribution to the lepton asymmetry.

  16. CO2 laser cutting

    CERN Document Server

    Powell, John

    1998-01-01

    The laser has given manufacturing industry a new tool. When the laser beam is focused it can generate one of the world's most intense energy sources, more intense than flames and arcs, though similar to an electron beam. In fact the intensity is such that it can vaporise most known materials. The laser material processing industry has been growing swiftly as the quality, speed and new manufacturing possibilities become better understood. In the fore of these new technologies is the process of laser cutting. Laser cutting leads because it is a direct process substitu­ tion and the laser can usually do the job with greater flexibility, speed and quality than its competitors. However, to achieve these high speeds with high quality con­ siderable know how and experience is required. This information is usually carefully guarded by the businesses concerned and has to be gained by hard experience and technical understanding. Yet in this book John Powell explains in lucid and almost non­ technical language many o...

  17. Results of surgical excision of urethral prolapse in symptomatic patients.

    Science.gov (United States)

    Hall, Mary E; Oyesanya, Tola; Cameron, Anne P

    2017-11-01

    Here, we present the clinical presentation and surgical outcomes of women with symptomatic urethral prolapse presenting to our institution over 20 years, and seek to provide treatment recommendations for management of symptomatic urethral prolapse and caruncle. A retrospective review of medical records from female patients who underwent surgery for symptomatic urethral prolapse from June 1995 to August 2015 was performed. Surgical technique consisted of a four-quadrant excisional approach for repair of urethral prolapse. A total of 26 patients were identified with a mean age of 38.8 years (range 3-81). The most common presentations were vaginal bleeding, hematuria, pain, and dysuria. All patients underwent surgical excision of urethral prolapse via a standard approach. Follow-up data was available in 24 patients. Six patients experienced temporary postoperative bleeding, and one patient required placement of a Foley catheter for tamponade. One patient experienced temporary postoperative urinary retention requiring Foley catheter placement. Three patients had visible recurrence of urethral prolapse, for which one later underwent re-excision. Surgical excision of urethral prolapse is a reasonable treatment option in patients who have tried conservative management without relief, as well as in those who present with severe symptoms. Possible complications following excision include postoperative bleeding and recurrence, and patients must be counseled accordingly. In this work, we propose a treatment algorithm for symptomatic urethral prolapse. © 2017 Wiley Periodicals, Inc.

  18. Revenue and Health Impacts of Restructuring Tobacco Excise Tax ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    A proposed law in the Philippines to increase the excise tax on tobacco by ... developing countries to reduce demand for tobacco through price and tax measures. Southeast Asian countries are struggling with how to implement the main provisions of the Convention. ... Far East Asia, Philippines, Central Asia, South Asia ...

  19. Positive malignant margins in clinically diagnosed and excised be ...

    African Journals Online (AJOL)

    This study was aimed at utilizing retrospective descriptive data to evaluate the percentage of clini-cally benign breast lumps that turned out to be histologically malignant and the prevalence of posi-tive tumour margins among the malignant cases. A total of 2,917 registered cases of excised breast lump at the Department of ...

  20. Comparison between preoperative biopsy and post-excision ...

    African Journals Online (AJOL)

    peripheral nerve sheath tumour (6%).[6] Soft-tissue sarcomas most frequently affect the extremities and include MFH (40%), lipo- sarcoma (25%), synovial sarcoma and fibrosarcoma.[7]. Appropriate management is reliant on an accurate preoperative histology result. Excision biopsy is recommended for tumours. <3 cm in ...

  1. The safety of complete mesocolic excision once again confirmed

    DEFF Research Database (Denmark)

    Bertelsen, C A; Neuenschwander, A U

    2018-01-01

    We would like to commend Bernhoff and colleagues (1) for publishing further evidence supporting complete mesocolic excision (CME) as a safe approach in colon cancer surgery. They report no increased risk of 30-day mortality or reoperation after right-sided CME in a nested case-control study...

  2. 26 CFR 25.2512-7 - Effect of excise tax.

    Science.gov (United States)

    2010-04-01

    ... by a taxpayer and made the subject of gifts within a reasonable time after purchase, the purchase...-7 Internal Revenue INTERNAL REVENUE SERVICE, DEPARTMENT OF THE TREASURY (CONTINUED) ESTATE AND GIFT TAXES GIFT TAX; GIFTS MADE AFTER DECEMBER 31, 1954 Transfers § 25.2512-7 Effect of excise tax. If...

  3. Nucleotide excision repair II: From yeast to mammals

    NARCIS (Netherlands)

    J.H.J. Hoeijmakers (Jan)

    1993-01-01

    textabstractAn intricate network of repair systems safeguards the integrity of genetic material, by eliminating DNA lesions induced by numerous environmental and endogenous genotoxic agents. Nucleotide excision repair (NER) is one of the most versatile DNA repair systems. Deficiencies in this

  4. Peri-operative management for excision of plexiform ...

    African Journals Online (AJOL)

    Case report: A 28-year-old female weighing 78 kilograms presented at the University of Port Harcourt Teaching Hospital (UPTH) with a huge left thigh mass, nodules and brownish skin patches (café-au-lait spots) all over her body. Plexiform neurofibromatosis was diagnosed. The mass was subsequently excised under ...

  5. Excise Taxes and the Price Elasticity of Demand.

    Science.gov (United States)

    Gamble, Ralph C., Jr.

    1989-01-01

    Points out that, although the analysis of the imposition of an excise tax is widely used in economics courses, the consequences of a change in the tax rate are different and ignored. This article presents an effective way to teach about such a change. (GG)

  6. Modeling base excision repair in Escherichia coli bacterial cells

    International Nuclear Information System (INIS)

    Belov, O.V.

    2011-01-01

    A model describing the key processes in Escherichia coli bacterial cells during base excision repair is developed. The mechanism is modeled of damaged base elimination involving formamidopyrimidine DNA glycosylase (the Fpg protein), which possesses several types of activities. The modeling of the transitions between DNA states is based on a stochastic approach to the chemical reaction description

  7. A Method To Determine Adhesion Of Suppository Mass On Excised ...

    African Journals Online (AJOL)

    A method to determine adhesion of suppository mass to intestinal tissue was developed using excised pig intestine. The method which employs the principe of drainage unto and subsequent detachment from the mucosa, of an adherent suppository mass is simple, inexpensive and accurate. Fully optimised, it can be used ...

  8. A Rat Excised Larynx Model of Vocal Fold Scar

    Science.gov (United States)

    Welham, Nathan V.; Montequin, Douglas W.; Tateya, Ichiro; Tateya, Tomoko; Choi, Seong Hee; Bless, Diane M.

    2009-01-01

    Purpose: To develop and evaluate a rat excised larynx model for the measurement of acoustic, aerodynamic, and vocal fold vibratory changes resulting from vocal fold scar. Method: Twenty-four 4-month-old male Sprague-Dawley rats were assigned to 1 of 4 experimental groups: chronic vocal fold scar, chronic vocal fold scar treated with 100-ng basic…

  9. Papillary lesions of the breast: To excise or observe?

    Science.gov (United States)

    Khan, Sidrah; Diaz, Adrian; Archer, Kellie J; Lehman, Rebecca R; Mullins, Tiffany; Cardenosa, Gilda; Bear, Harry D

    2018-05-01

    Papillary lesions of the breast range from benign to atypical to malignant. Although papillomas without frank cancer are benign, their management remains controversial. When a core needle biopsy of a lesion yields a diagnosis of intraductal papilloma with atypia, excision is generally recommended to rule out a concurrent malignant neoplasm. For intraductal papillomas without atypia, however, recommendations for excision versus observation are variable. The aims of this study are to evaluate the rate of concurrent malignancies for intraductal papilloma diagnosed on core needle biopsy and to assess the long-term risk of developing cancer after the diagnosis of a papillary lesion. This single institution retrospective study analyzed 259 patients that were diagnosed with intraductal papilloma (IDP) by core needle biopsy from 1995 to 2010. Patients were grouped by initial diagnosis into three groups (papilloma without atypia, papilloma with atypia, and papilloma with atypical duct hyperplasia or atypical lobular hyperplasia (ADH/ALH) and followed up for long-term outcomes. After a core needle biopsy showing IDP with atypia or IDP + ADH/ALH, surgical excision yielded a diagnosis of concomitant invasive or ductal in situ cancer in greater that 30% of cases. For intraductal papilloma without atypia, the likelihood of cancer was much lower. Moreover, even with excision, the finding of intraductal papilloma with atypia carries a significant risk of developing cancer long-term, and such patients should be followed carefully and perhaps should be considered for chemoprevention. © 2017 Wiley Periodicals, Inc.

  10. 76 FR 46677 - Indoor Tanning Services; Cosmetic Services Excise Taxes

    Science.gov (United States)

    2011-08-03

    ... DEPARTMENT OF THE TREASURY Internal Revenue Service 26 CFR Parts 40 and 49 [REG-112841-10] RIN 1545-BJ40 Indoor Tanning Services; Cosmetic Services Excise Taxes AGENCY: Internal Revenue Service (IRS), Treasury. ACTION: Notice of public hearing on proposed rulemaking. SUMMARY: This document provides notice...

  11. 75 FR 33740 - Indoor Tanning Services; Cosmetic Services; Excise Taxes

    Science.gov (United States)

    2010-06-15

    ... 1545-BJ40 Indoor Tanning Services; Cosmetic Services; Excise Taxes AGENCY: Internal Revenue Service.... 7805. * * * Par. 5. Section 49.0-3 is added to read as follows: Sec. 49.0-3 Introduction; cosmetic...--Cosmetic Services Sec. 49.5000B-1 Indoor tanning services. [The text of this proposed Sec. 49.5000B-1 is...

  12. of lung metastases carcinoma of the cervix Surgical excision from ...

    African Journals Online (AJOL)

    of lung metastases carcinoma of the cervix. Surgical excision from squamous. A report of 2 cases. N. G. DE MOOR, A. V. BERRY, M. M. NISSENBAUM. These2casereportsservetoemphasizetwoimpor- tant points concerning carcinoma of the cervix: (i) blood-borne metastases are now frequently encountered in this disease; ...

  13. Clinical trial comparing excision and primary closure with modified ...

    African Journals Online (AJOL)

    The aim of this study was to compare modified Limberg flap procedure with excision and primary closure in the treatment of uncomplicated pilonidal disease. Methods: This study was conducted on 120 patients with uncomplicated sacrococcygeal pilonidal disease that were randomly allocated into two groups: group I ...

  14. Microendoscopic excision of C2 osteoid osteoma: a technical report.

    Science.gov (United States)

    Kulkarni, Arvind G; Dhruv, Abhilash N; Bassi, Anupreet J

    2013-09-01

    Case report and description of technique. To describe a microendoscopic posterior approach for excision of an osteoid osteoma of C2. Microendoscopic techniques are widely used in the management of degenerative disorders of the spine. This is the first report of their use in the management of an osteoid osteoma via the posterior approach. A 12-year-old-boy presented with left-sided neck pain of 3-month duration. Investigations revealed an osteoid osteoma of C2 lamina-lateral mass complex. The patient underwent a posterior microendoscopic excision using 18-mm diameter METRx system (Medtronic Sofamor Danek, Memphis, TN) of tubular retractors. A postoperative computed tomographic scan was done and preoperative and postoperative visual analogue scale and Neck Disability Index were evaluated. The patient was periodically followed up for 1 year. The postoperative computed tomographic scan revealed complete excision of the tumor. The visual analogue scale score for neck pain improved from 3/5 (preoperative) to 0/5 (postoperative) and Neck Disability Index from 33.33 (preoperative) to 0 (postoperative) at 1-year follow-up. Microendoscopic techniques can be extended to excise lesions of the spine. It is a safe procedure in experienced hands. The advantages are minimal morbidity, minimal postoperative pain and discomfort, less analgesic dependence, and better cosmesis. The authors recommend this technique for accessible lesions involving the spine.

  15. Modulation of DNA base excision repair during neuronal differentiation

    DEFF Research Database (Denmark)

    Sykora, Peter; Yang, Jenq-Lin; Ferrarelli, Leslie K

    2013-01-01

    DNA damage susceptibility and base excision DNA repair (BER) capacity in undifferentiated and differentiated human neural cells. The results show that undifferentiated human SH-SY5Y neuroblastoma cells are less sensitive to oxidative damage than their differentiated counterparts, in part because...

  16. Principles of Periocular Reconstruction following Excision of Cutaneous Malignancy

    International Nuclear Information System (INIS)

    Hayano, S. M.; Whipple, K. M.; Korn, B. S.; Kikkawa, D. O.

    2012-01-01

    Reconstruction of periocular defects following excision of cutaneous malignancy can present difficulties for oculofacial and reconstructive surgeons. The intricate anatomy of the eyelids and face requires precise restoration in order to avoid postoperative functional anesthetic concerns. Various reconstructive procedures based on common principles, location and size of the defect, can be applied to achieve restoration with the best possible functional and aesthetic outcomes.

  17. Surgical excision of lung metastases from squamous carcinoma of ...

    African Journals Online (AJOL)

    These 2 case reports serveto emphasizetwo important points concerning carcinoma of the cervix: (i) blood-borne metastases are now frequently encountered in this disease; and (ii). in selected cases surgical excision of a secondary deposit in the lung is the treatment of choice and may even result -in cure.

  18. Deficiency of UV-induced excision repair in human thymocytes

    International Nuclear Information System (INIS)

    Gensler, H.L.; Lindberg, R.E.; Pinnas, J.L.; Jones, J.F.

    1985-01-01

    The capacity of human thymocytes and of differentiated lymphocytes circulating in peripheral blood to perform unscheduled DNA synthesis (a measure of nucleotide excision repair) after UV irradiation was measured by radioautographic analysis. Only 4% of immature T lymphocytes, but 68% of circulating lymphocytes exhibited unscheduled DNA synthesis. When UV sensitivity of peripheral blood lymphocytes and thymocytes from the same donor were compared, the thymocytes, in each case, were significantly more UV sensitive than were the circulating lymphocytes. Peripheral blood lymphocytes from subjects undergoing halothane and morphine anesthesia during surgery showed 56% less excision repair capacity than those from unanesthetized donors. The difference occurred in the number of cells capable of repair rather than in the extent of repair synthesis per cell. Ultraviolet-induced unscheduled DNA synthesis occurred in only 3% of the thymocytes removed from rats killed by cervical dislocation. Therefore, the deficiency of excision repair was observed in rat thymocytes which had not been affected by anesthesia or surgical trauma. The results indicate that immature T-cells are deficient in nucleotide excision repair whereas the majority of mature peripheral blood lymphocytes exhibit such repair. (author)

  19. Excision Les jeunes changent l'Afrique par les TIC

    International Development Research Centre (IDRC) Digital Library (Canada)

    Comité Inter-Africain sur les Pratiques Traditionnelles ayant effet sur la santé des ... Planche 7 - Perception genrée de la citoyenneté : les dire des femmes. 90 ...... dans le monde avec les migrations internationales, l'excision ne semble pas être ...... En utilisant les TIC pour exprimer leurs attentes et leurs besoins, les jeunes, ...

  20. The possible impact of an alcohol welfare surcharge on consumption of alcoholic beverages in Taiwan

    Science.gov (United States)

    2013-01-01

    Background The abuse of alcoholic beverages leads to numerous negative consequences in Taiwan, as around the world. Alcohol abuse not only contributes to cardiovascular disease, hypertension, diabetes and cancer, but it is also an underlying cause of many other serious problems, such as traffic accidents, lost productivity, and domestic violence. International leaders in health policy are increasingly using taxation as an effective tool with which to lower alcohol consumption. In this study, we assessed how consumption patterns in Taiwan would be affected by levying a welfare surcharge on alcoholic beverages of 20%, 40% or 60% in accordance with the current excise tax. We also assessed the medical savings Taiwan would experience if consumption of alcoholic beverages were to decrease and how much additional revenue a welfare surcharge would generate. Methods We estimated the elasticity of four types of alcoholic beverages (beer, wine, whisky and brandy) using the Central Bureau of Statistics (CBS) Demand Model. Specifically, we estimated alcohol’s price elasticity by analyzing the sales prices and time statistics of these products from 1974 to 2009. Results Alcoholic beverages in Taiwan have the following price elasticities: beer (−0.820), wine (−0.955), whisky (−0.587), brandy (−0.958). A welfare surcharge tax of 40% in accordance with the excise tax would decrease overall consumption of beer, wine, whisky and brandy between 16.24% and 16.42%. It would also generate New Taiwan Dollar (NT$) revenues of 5.782 billion to 5.993 billion. Savings in medical costs would range from NT$871.07 million to NT$897.46 million annually. Conclusions A social and welfare surcharge of 40% on alcoholic beverages in Taiwan would successfully lower consumption rates, decrease medical costs, and generate revenue that could be used to educate consumers and further decrease consumption rates. Consequently, we strongly recommend that such a tax be imposed in Taiwan. PMID:24010885

  1. Does the response to alcohol taxes differ across racial/ethnic groups? Some evidence from 1984-2009 Behavioral Risk Factor Surveillance System.

    Science.gov (United States)

    An, Ruopeng; Sturm, Roland

    2011-03-01

    Excessive alcohol use remains an important lifestyle-related contributor to morbidity and mortality in the U.S. and worldwide. It is well documented that drinking patterns differ across racial/ethnic groups, but not how those different consumption patterns would respond to tax changes. Therefore, policy makers are not informed on whether the effects of tax increases on alcohol abuse are shared equally by the whole population, or policies in addition to taxation should be pursued to reach certain sociodemographic groups. To estimate differential demand responses to alcohol excise taxes across racial/ethnic groups in the U.S. Individual data from the Behavioral Risk Factor Surveillance System 1984-2009 waves (N= 3,921,943, 39.3% male; 81.3% White, 7.8% African American, 5.8% Hispanic, 1.9% Asian or Pacific Islander, 1.4% Native American, and 1.8% other race/multi-race) are merged with tax data by residential state and interview month. Dependent variables include consumption of any alcohol and number of drinks consumed per month. Demand responses to alcohol taxes are estimated for each race/ethnicity in separate regressions conditional on individual characteristics, state and time fixed effects, and state-specific secular trends. The null hypothesis on the identical tax effects among all races/ethnicities is strongly rejected (P ethnicities, the estimated tax effects on consumption are large and significant among light drinkers (1-40 drinks per month), but shrink substantially for moderate (41-99) and heavy drinkers (≥ 100). Extensive research has been conducted on overall demand responses to alcohol excise taxes, but not on heterogeneity across various racial/ethnic groups. Only one similar prior study exists, but used a much smaller dataset. The authors did not identify differential effects. With this much larger dataset, we found some evidence for different responses across races/ethnicities to alcohol taxes, although we lack precision for individual group

  2. Simulating the impact of excise taxation for disease prevention in low-income and middle-income countries: an application to South Africa.

    Science.gov (United States)

    Stacey, Nicholas; Summan, Amit; Tugendhaft, Aviva; Laxminarayan, Ramanan; Hofman, Karen

    2018-01-01

    Excise taxes are policy tools that have been applied internationally with some success to reduce consumption of products adversely impacting population health including tobacco, alcohol and increasingly junk foods and sugary beverages. As in other low-income and middle-income countries, South Africa faces a growing burden of lifestyle diseases; accordingly we simulate the impact of multiple excise tax interventions in this setting. We construct a mathematical model to simulate the health and revenue effects of increased excise taxes, which is adaptable to a variety of settings given its limited data requirements. Applying the model to South Africa, we simulate the impact of increased tax rates on tobacco and beer and of the introduction of a tax on sugar-sweetened beverages (SSB). Drawing on surveys of product usage and risk factor prevalence, the model uses a potential impact fraction to simulate the health effects of tax interventions. Adopting an excise rate of 60% on tobacco would result in a gain of 858 923 life-years (95% uncertainty interval (UI) 480 188 to 1 310 329), while adopting an excise rate of 25% on beer would result in a gain of 568 063 life-years (95% UI 412 110 to 775 560) and the adoption of a 20% tax on SSBs would result in a gain of 688 719 life-years (95% UI 321 788 to 1 079 653). More aggressive excise tax policies on tobacco, beer and SSBs in South Africa could result in meaningful improvements in population health and raised revenue.

  3. The Cutting Process, Chips and Cutting Forces in Machining CFRP

    DEFF Research Database (Denmark)

    Koplev, A.; Lystrup, Aage; Vorm, T.

    1983-01-01

    The cutting of unidirectional CFRP, perpendicular as well as parallel to the fibre orientation, is examined. Shaping experiments, ‘quick-stop’ experiments, and a new chip preparation technique are used for the investigation. The formation of the chips, and the quality of the machined surface...... is discussed. The cutting forces parallel and perpendicular to the cutting direction are measured for various parameters, and the results correlated to the formation of chips and the wear of the tool....

  4. Isopropanol alcohol poisoning

    Science.gov (United States)

    Rubbing alcohol poisoning; Isopropyl alcohol poisoning ... Isopropyl alcohol can be harmful if it is swallowed or gets in the eyes. ... These products contain isopropanol: Alcohol swabs Cleaning supplies ... Rubbing alcohol Other products may also contain isopropanol.

  5. Alcohol Energy Drinks

    Science.gov (United States)

    ... Home / About Addiction / Alcohol / Alcohol Energy Drinks Alcohol Energy Drinks Read 33960 times font size decrease font size increase font size Print Email Alcohol energy drinks (AEDs) or Caffeinated alcoholic beverages (CABs) are ...

  6. Alcohol and pregnancy

    Science.gov (United States)

    Drinking alcohol during pregnancy; Fetal alcohol syndrome - pregnancy; FAS - fetal alcohol syndrome ... lead to lifelong damage. DANGERS OF ALCOHOL DURING PREGNANCY Drinking a lot of alcohol during pregnancy can ...

  7. NIAAA Alcohol Treatment Navigator

    Science.gov (United States)

    ... What to Know About Alcohol Treatment What Is Alcohol Use Disorder (AUD)? What Types of Alcohol Treatment Are Available? ... What to Know About Alcohol Treatment What is alcohol use disorder (AUD)? A health condition that can improve with ...

  8. Aerodynamic Interactions During Laser Cutting

    Science.gov (United States)

    Fieret, J.; Terry, M. J.; Ward, B. A.

    1986-11-01

    Most laser cutting systems utilise a gas jet to remove molten or vaporised material from the kerf. The speed, economy and quality of the cut can be strongly dependent on the aerodynamic conditions created by the nozzle, workpiece proximity and kerf shape. Adverse conditions can be established that may lead to an unwelcome lack of reproducibility of cut quality. Relatively low gas nozzle pressures can result in supersonic flow in the jet with its associated shock fronts. When the nozzle is placed at conventional distances (1-2mm) above the workpiece, the force exerted by the gas on the workpiece and the cut products (the cutting pressure) can be significantly less than the nozzle pressure. Higher cutting pressures can be achieved by increasing the height of the nozzle above the workpiece, to a more damage resistant zone, provided that the shock structure of the jet is taken into account. Conventional conical nozzles with circular exits can be operated with conditions that will result in cutting pressures up to 3 Bar (g) in the more distant zone. At higher pressures in circular tipped nozzles the cutting pressure in this zone decays to inadequate levels. Investigations of a large number of non-circular nozzle tip shapes have resulted in the selection of a few specific shapes that can provide cutting pressures in excess of 6 Bar(g) at distances of 4 to 7mm from the nozzle tip. Since there is a strong correlation between cutting pressure and the speed and quality of laser cutting, the paper describes the aerodynamic requirements for achieving the above effects and reports the cutting results arising from the different nozzle designs and conditions. The results of the work of other investigators, who report anomalous laser cutting results, will be examined and reviewed in the light of the above work.

  9. Obturator foramen dissection for excision of symptomatic transobturator mesh.

    Science.gov (United States)

    Reynolds, W Stuart; Kit, Laura Chang; Kaufman, Melissa R; Karram, Mickey; Bales, Gregory T; Dmochowski, Roger R

    2012-05-01

    Groin pain after transobturator synthetic mesh placement can be recalcitrant to conservative therapy and ultimately requires surgical excision. We describe our experiences with and technique of obturator foramen dissection for mesh excision. The records of 8 patients treated from 2005 to 2010, were reviewed. Obturator dissection was performed via a lateral groin incision over the inferior pubic ramus at the level of the obturator foramen, typically in conjunction with orthopedic surgery. Five patients had transobturator mid urethral sling surgery for stress urinary incontinence, 2 had mid urethral sling and trocar based anterior vaginal wall mesh kits with transobturator passage of mesh arms for stress urinary incontinence and pelvic organ prolapse, and 1 had an anterior vaginal wall mesh kit for pelvic organ prolapse. Patients had 0 to 2 prior transvaginal mesh excisions before obturator surgery. All patients presented with intractable pain in the area of the obturator foramen and/or medial groin for which conservative treatment measures had failed. Six patients underwent concurrent vaginal and obturator dissection and 2 underwent obturator dissection alone. In all cases residual mesh (3 to 11 cm) was identified and excised from the obturator foramen. Mesh was closely associated to or traversing the adductor longus muscle and tendon with significant fibrous reaction in all cases. Postoperatively 5 patients were cured of pain and/or infection, and 3 reported no or some improvement at a mean followup of 6 months (range 1 to 12). Our experience suggests that surgical excision of residual mesh can alleviate many of the symptoms in many patients. In all cases mesh remnants were identified and removed, and typically involved neuromuscular structures adjacent to the obturator foramen. Copyright © 2012 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

  10. Outcome of excision of megarectum in children with anorectal malformation.

    Science.gov (United States)

    Keshtgar, Alireza S; Ward, Harry C; Richards, Catherine; Clayden, Graham S

    2007-01-01

    Megarectum in association with anorectal malformation contributes to chronic constipation and fecal incontinence. Resection of megarectum in anorectal malformation improves bowel function, but neuropathy and poor sphincter quality may affect the outcome of fecal continence adversely. The aim of this study was to evaluate the benefits of resection of megarectum in anorectal malformation and to ascertain the impact of anal sphincter quality and neuropathy on the outcome. We studied 62 children with intractable fecal incontinence after repair of anorectal malformation between January 1991 and January 2005. All patients were investigated with anorectal manometry and anal endosonography under ketamine anesthesia. On endosonography, an intact or scarred internal anal sphincter (IAS) was classified as good and a fragmented or absent IAS as poor. On manometry, a resting anal sphincter pressure equal to or more than 30 mm Hg was classified as good and a lower pressure as poor. Functional assessment of fecal continence was done before and after excision of megarectum using a modified Wingfield scores. Sixteen children had excision of megarectum with median age of 9 years (range, 2-15 years) and postoperative follow-up of 5 years (range, 1-10 years). Seven had formation of antegrade continent enema stoma before excision of megarectum. Children were classified into three groups of anomalies: low (n = 6), intermediate (n = 4), and high (n = 6). All children were incontinent of feces. After excision of megarectum, of the 9 children with good IAS and no neuropathy, 7 became continent of feces. Of the remaining 7 children, 4 had poor IAS and 3 had neuropathy, 5 of whom required an antegrade continent enema stoma to be clean. Excision of megarectum in children who had previous repair of anorectal malformation results in fecal continence in the presence of a good IAS and absence of neuropathy. Patients with a poor IAS or neuropathy will often require artificial means of fecal

  11. ADVANCED CUTTINGS TRANSPORT STUDY

    Energy Technology Data Exchange (ETDEWEB)

    Stefan Miska; Nicholas Takach; Kaveh Ashenayi

    2004-01-31

    Final design of the mast was completed (Task 5). The mast is consisting of two welded plate girders, set next to each other, and spaced 14-inches apart. Fabrication of the boom will be completed in two parts solely for ease of transportation. The end pivot connection will be made through a single 2-inch diameter x 4 feet-8 inch long 316 SS bar. During installation, hard piping make-ups using Chiksan joints will connect the annular section and 4-inch return line to allow full movement of the mast from horizontal to vertical. Additionally, flexible hoses and piping will be installed to isolate both towers from piping loads and allow recycling operations respectively. Calibration of the prototype Foam Generator Cell has been completed and experiments are now being conducted. We were able to generate up to 95% quality foam. Work is currently underway to attach the Thermo-Haake RS300 viscometer and install a view port with a microscope to measure foam bubble size and bubble size distribution. Foam rheology tests (Task 13) were carried out to evaluate the rheological properties of the proposed foam formulation. After successful completion of the first foam test, two sets of rheological tests were conducted at different foam flow rates while keeping other parameters constant (100 psig, 70F, 80% quality). The results from these tests are generally in agreement with the previous foam tests done previously during Task 9. However, an unanticipated observation during these tests was that in both cases, the frictional pressure drop in 2 inch pipe was lower than that in the 3 inch and 4 inch pipes. We also conducted the first foam cuttings transport test during this quarter. Experiments on aerated fluids without cuttings have been completed in ACTF (Task 10). Gas and liquid were injected at different flow rates. Two different sets of experiments were carried out, where the only difference was the temperature. Another set of tests was performed, which covered a wide range of

  12. Skin Cut Construction

    DEFF Research Database (Denmark)

    2017-01-01

    projects - among others - from ARC are included: Soft Structures builds upon of a series of experimental use of EPS hot wire cutting, where the EPS eventually act as formwork for concrete casting. The processing of the EPS is distinct and delimited by the behaviour and form of both the robot and tool...... of steel and concrete makes it a reliable approach to many challenges in the realisation of buildings. Rebar Inside Out attempts to rethink the possibilities of the reinforced concrete composite starting from its inside. This means starting with the reinforcing steel, the production and shaping of this......, and then through that process build a workflow for the production of the concrete composite. It also means letting the steel out of the concrete, thereby positioning the two materials in a transnational relationship between steel construction and concrete composite....

  13. There has been little progress in implementing comprehensive alcohol control strategies in Africa.

    Science.gov (United States)

    Peer, Nasheeta

    2017-11-01

    Alcohol is the most common substance of addiction and a threat not only to health but also to sustainable human development. Consequently, at least a 10% relative reduction in the harmful use of alcohol has been advocated by the World Health Organization (WHO). This perspective describes alcohol use in Africa, strategies to reduce harmful alcohol use, and the ability of African countries to meet this target. Although alcohol consumption in Africa was intermediate compared to other world regions, the total alcohol per capita among alcohol consumers was the second highest (19.5 liters); 19% of Sub-Saharan African men could be classified as binge drinkers. The alcohol industry is the key driver behind the uptake of alcohol use and misuse. The most cost-effective ways to reduce alcohol-related harm is to make alcohol less available and more expensive and to prohibit alcohol advertising. Most African countries have alcohol excise taxes, but these are not adjusted for inflation, meaning that the effectiveness of these taxes will likely decrease with time, leading to greater affordability. The majority of African countries do not have legally binding regulations for alcohol marketing. Alcohol misuse in Africa is not being addressed at a time when available strategies can efficiently and cost-effectively control alcohol-related harm.

  14. Genetic variation in the base excision repair pathway, environmental risk factors, and colorectal adenoma risk.

    Directory of Open Access Journals (Sweden)

    Roman Corral

    Full Text Available Cigarette smoking, high alcohol intake, and low dietary folate levels are risk factors for colorectal adenomas. Oxidative damage caused by these three factors can be repaired through the base excision repair pathway (BER. We hypothesized that genetic variation in BER might modify colorectal adenoma risk. In a sigmoidoscopy-based study, we examined associations between 182 haplotype tagging SNPs in 14 BER genes, and colorectal adenoma risk, and examined their potential role as modifiers of the effect cigarette smoking, alcohol intake, and dietary folate levels. Among all individuals, no statistically significant associations between BER SNPs and adenoma risk persisted after correction for multiple comparisons. However, among Asian-Pacific Islanders we observed two SNPs in FEN1 and one in NTHL1, and among African-Americans one SNP in APEX1 that were associated with colorectal adenoma risk. Significant associations were also observed between SNPs in the NEIL2 gene and rectal adenoma risk. Three SNPS modified the effect of smoking (MUTYH interaction p = 0.002; OGG1 interaction p = 0.013; FEN1 interaction p = 0.013, one SNP in LIG3 modified the effect of alcohol consumption (interaction p = 0.024 and two SNPs in LIG3 modified the effect of dietary folate (interaction p = 0.001 and p = 0.08 on colorectal adenoma risk. These findings support a role for genetic variants in the BER pathway as potential modifiers of colorectal adenoma risk. Our findings strengthen the role of oxidative damage induced by key lifestyle and dietary risk factors in colorectal adenoma formation.

  15. Semantic Versus Syntactic Cutting Planes

    OpenAIRE

    Filmus, Yuval; Hrubeš, Pavel; Lauria, Massimo

    2016-01-01

    In this paper, we compare the strength of the semantic and syntactic version of the cutting planes proof system. First, we show that the lower bound technique of Pudlák applies also to semantic cutting planes: the proof system has feasible interpolation via monotone real circuits, which gives an exponential lower bound on lengths of semantic cutting planes refutations. Second, we show that semantic refutations are stronger than syntactic ones. In particular, we give a formula for whic...

  16. Laser Cutting of Different Materials

    Directory of Open Access Journals (Sweden)

    Kadir ÇAVDAR

    2013-08-01

    Full Text Available In this paper; in general potential developments and trends of a particular machining field by extensively evaluating present studies of laser beam machining have been discussed. As it is indicated below, technical literatures have been subsumed under five major headlines: Experimental studies, reviews, optimization researches of the cutting parameters, theoretical modelling studies of laser beam cutting and academic studies relating to laser cutting

  17. Alcoholism and alcohol drinking habits predicted from alcohol dehydrogenase genes

    DEFF Research Database (Denmark)

    Tolstrup, J.S.; Nordestgaard, Børge; Rasmussen, S.

    2008-01-01

    Alcohol is degraded primarily by alcohol dehydrogenase (ADH) wherein genetic variation that affects the rate of alcohol degradation is found in ADH1B and ADH1C. It is biologically plausible that these variations may be associated with alcohol drinking habits and alcoholism. By genotyping 9080 whi...

  18. Latest development of laser cutting

    OpenAIRE

    Wetzig, Andreas; Herwig, Patrick; Hauptmann, Jan; Goppold, Cindy; Baumann, Robert; Fürst, Andreas; Rose, Michael; Pinder, Thomas; Mahrle, Achim; Beyer, Eckhard

    2016-01-01

    Laser cutting was one of the first applications of laser material processing. Today, laser cutting is the most widespread application among laser material processing besides laser marking. Meanwhile, nearly each material can be cut by means of a laser, in particular since ultra short pulse lasers are available in the power range of up to 100 W. The to be cut material can come with thicknesses from a few microns till tens of millimeters as flat stock or as free form shapes. The paper will conc...

  19. CALCULATION OF LASER CUTTING COSTS

    Directory of Open Access Journals (Sweden)

    Bogdan Nedic

    2016-09-01

    Full Text Available The paper presents description methods of metal cutting and calculation of treatment costs based on model that is developed on Faculty of mechanical engineering in Kragujevac. Based on systematization and analysis of large number of calculation models of cutting with unconventional methods, mathematical model is derived, which is used for creating a software for calculation costs of metal cutting. Software solution enables resolving the problem of calculating the cost of laser cutting, comparison' of costs made by other unconventional methods and provides documentation that consists of reports on estimated costs.

  20. Alcohol Intolerance

    Science.gov (United States)

    ... ingredients commonly found in alcoholic beverages, especially in beer or wine, can cause intolerance reactions. These include: Sulfites or other preservatives Chemicals, grains or other ingredients Histamine, a byproduct of fermentation or brewing In some cases, reactions can be ...

  1. Alcohol Poisoning

    Science.gov (United States)

    ... than eight breaths a minute) Irregular breathing (a gap of more than 10 seconds between breaths) Blue- ... about alcohol by their parents and who report close relationships with their parents are less likely to ...

  2. Alcoholic neuropathy

    Science.gov (United States)

    ... Frequently inspecting the feet and shoes to reduce injury caused by pressure or objects in the shoes Guarding the extremities to prevent injury from pressure Alcohol must be stopped to prevent ...

  3. Robotic transanal total mesorectal excision for rectal cancer: experience with a first case

    NARCIS (Netherlands)

    Verheijen, P.M.; Consten, E.C.J.; Broeders, Ivo Adriaan Maria Johannes

    2014-01-01

    Background: A transanal approach for total mesorectal excision (TME) using a single incision port is feasible. The disadvantages are technical difficulties associated with limited manoeuvrability. Methods: We present our first experience with robotic-assisted transanal total mesorectal excision. A

  4. Black-hole excision with multiple grid patches

    Energy Technology Data Exchange (ETDEWEB)

    Thornburg, Jonathan [Max-Planck-Institut fuer Gravitationsphysik, Albert-Einstein-Institut, Am Muehlenberg 1, D-14476 Golm (Germany)

    2004-08-07

    When using black-hole excision to numerically evolve a black-hole spacetime with no continuous symmetries, most 3 + 1 finite differencing codes use a Cartesian grid. It is difficult to do excision on such a grid because the natural r = constant excision surface must be approximated either by a very different shape such as a contained cube, or by an irregular and non-smooth 'LEGO{sup 1} sphere' which may introduce numerical instabilities into the evolution. In this paper I describe an alternate scheme which uses multiple {l_brace}r x (angular coordinates){r_brace} grid patches, each patch using a different (nonsingular) choice of angular coordinates. This allows excision on a smooth r = constant 2-sphere. I discuss the key design choices in such a multiple-patch scheme, including the choice of ghost-zone versus internal-boundary treatment of the interpatch boundaries (I use a ghost-zone scheme), the number and shape of the patches (I use a 6-patch 'inflated-cube' scheme), the details of how the ghost zones are 'synchronized' by interpolation from neighbouring patches, the tensor basis for the Einstein equations in each patch, and the handling of non-tensor field variables such as the BSSN {gamma}-tilde{sup i} (I use a scheme which requires ghost zones which are twice as wide for the BSSN conformal factor {phi} as for {gamma}-tilde{sup i} and the other BSSN field variables). I present sample numerical results from a prototype implementation of this scheme. This code simulates the time evolution of the (asymptotically flat) spacetime around a single (excised) black hole, using fourth-order finite differencing in space and time. Using Kerr initial data with J/m{sup 2} = 0.6, I present evolutions to t {approx}> 1500m. The lifetime of these evolutions appears to be limited only by outer boundary instabilities, not by any excision instabilities or by any problems inherent to the multiple-patch scheme.

  5. The effect of spending cuts on teen pregnancy.

    Science.gov (United States)

    Paton, David; Wright, Liam

    2017-07-01

    In recent years, English local authorities have been forced to make significant cuts to devolved expenditure. In this paper, we examine the impact of reductions in local expenditure on one particular public health target: reducing rates of teen pregnancy. Contrary to predictions made at the time of the cuts, panel data estimates provide no evidence that areas which reduced expenditure the most have experienced relative increases in teenage pregnancy rates. Rather, expenditure cuts are associated with small reductions in teen pregnancy rates, a result which is robust to a number of alternative specifications and tests for causality. Underlying socio-economic factors such as education outcomes and alcohol consumption are found to be significant predictors of teen pregnancy. Copyright © 2017 Elsevier B.V. All rights reserved.

  6. Resolution of vitiligo following excision of halo congenital melanocytic nevus: a rare case report.

    Science.gov (United States)

    Wang, Kai; Wang, Zhi; Huang, Weiqing

    2016-05-01

    Halo congenital melanocytic nevus (CMN) associated with vitiligo is rare, especially with regard to CMN excision. Only two reports of excision of halo CMN following repigmentation of vitiligo are found in the literature. We present a case of a girl with halo CMN and periorbital vitiligo. The halo CMN was excised and followed by spontaneous improvement of vitiligo. The result suggests excision of the inciting lesion may be a promising way to control vitiligo. © 2015 Wiley Periodicals, Inc.

  7. 29 CFR 779.263 - Excise taxes not at the retail level.

    Science.gov (United States)

    2010-07-01

    ... ACT AS APPLIED TO RETAILERS OF GOODS OR SERVICES Employment to Which the Act May Apply; Enterprise Coverage Excise Taxes § 779.263 Excise taxes not at the retail level. There are also a wide variety of... 29 Labor 3 2010-07-01 2010-07-01 false Excise taxes not at the retail level. 779.263 Section 779...

  8. First observation of excision and integration in Class 1 integron in ...

    African Journals Online (AJOL)

    So in this study, we tested in S. aureus, the class 1 integron mediated excision and integration. We first asked 8 plasmids from previous studies, then established some transformants and perform the excision and integration reaction. As the results revealed, we observed positive excision assay, which had been confirmed by ...

  9. A cutting fluid

    Energy Technology Data Exchange (ETDEWEB)

    Kajdas, C.; Dominiak, M.; Kozinski, R.; Misterkiewicz, B.; Polowniak, J.; Szczepaniak, S.

    1982-06-30

    The cutting fluid (SOZh) contains 0.5 to 10 percent vegetable or animal fats, selectively sulfurized in the presence of a catalyst (Kt): 0.1 to 10 percent chlorinated C2O to C3O paraffins, which contain 10 to 50 percent Chlorine in a molecule, and 0.001 to 0.5 percent dialkyldithiocarbamic or alkylen-bis-(dithiocarbamic) acids or their salts or derivatives of the form (R(R')NC(S)SRn'', (CH2)n(NHC(S)S)2R'' or R(R')NC(S)SnC(S)(R)R', where R and R' are alkyl or cycloalkyl of the C1 to C6 fractions, R'' is Hydrogen, a metal, or aliphatic or heterocyclic amine, n = 2 to 6 and 0.001 to 0.3 percent of heterocyclic mercaptanes or disulfides of the cited formula, where A is Nitrogen or Sulfur, and up to 100 percent petroleum oil with a kinematic viscosity of 5 to 50 square millimeters per second at 323K.

  10. Excise Tax Avoidance: The Case of State Cigarette Taxes

    Science.gov (United States)

    DeCicca, Philip; Kenkel, Donald; Liu, Feng

    2013-01-01

    We conduct an applied welfare economics analysis of cigarette tax avoidance. We develop an extension of the standard formula for the optimal Pigouvian corrective tax to incorporate the possibility that consumers avoid the tax by making purchases in nearby lower-tax jurisdictions. To provide a key parameter for our formula, we estimate a structural endogenous switching regression model of border-crossing and cigarette prices. In illustrative calculations, we find that for many states, after taking into account tax avoidance the optimal tax is at least 20 percent smaller than the standard Pigouvian tax that simply internalizes external costs. Our empirical estimate that tax avoidance strongly responds to the price differential is the main reason for this result. We also use our results to examine the benefits of replacing avoidable state excise taxes with a harder-to-avoid federal excise tax on cigarettes. PMID:24140760

  11. Transanal vs laparoscopic total mesorectal excision for rectal cancer

    DEFF Research Database (Denmark)

    Perdawood, Sharaf; Al Khefagie, Ghalib Ali Abod

    2016-01-01

    BACKGROUND: Laparoscopic total mesorectal excision (LaTME) has improved short-term outcomes of rectal cancer surgery with comparable oncological results to open approach. LaTME can be difficult in the lower most part of the rectum, leading potentially to higher rates of complications, conversion...... to open surgery and probably suboptimal oncological quality. Transanal TME (TaTME) can potentially solve these problems. The aim of this study was to compare the short-term results after TaTME with those after LaTME. METHODS: A prospectively collected database of consecutive patients who underwent Ta......TME was maintained. Results were compared with those underwent LaTME in the preceding period. Patients who underwent low anterior resection or intersphincteric abdominoperineal excision (APE) were included. Primary end-points were radical resection and specimen quality. Secondary end-points were complications, rates...

  12. Excise tax avoidance: the case of state cigarette taxes.

    Science.gov (United States)

    DeCicca, Philip; Kenkel, Donald; Liu, Feng

    2013-12-01

    We conduct an applied welfare economics analysis of cigarette tax avoidance. We develop an extension of the standard formula for the optimal Pigouvian corrective tax to incorporate the possibility that consumers avoid the tax by making purchases in nearby lower tax jurisdictions. To provide a key parameter for our formula, we estimate a structural endogenous switching regression model of border-crossing and cigarette prices. In illustrative calculations, we find that for many states, after taking into account tax avoidance the optimal tax is at least 20% smaller than the standard Pigouvian tax that simply internalizes external costs. Our empirical estimate that tax avoidance strongly responds to the price differential is the main reason for this result. We also use our results to examine the benefits of replacing avoidable state excise taxes with a harder-to-avoid federal excise tax on cigarettes. Copyright © 2013 Elsevier B.V. All rights reserved.

  13. Isolated myocardial hydatid cyst: Managed with total curative excision

    Directory of Open Access Journals (Sweden)

    Santosh Kumar Sinha

    2016-01-01

    Full Text Available Hydatid disease is still prevalent in developing countries, and isolated cardiac hydatid cysts are the rarest presentation. We report a 40-year-old nondiabetic, nonhypertensive female who presented with low-grade fever for 2 months shortness of breath and orthopnea for 2 weeks. Transthoracic echocardiography revealed a large, round cystic lesion with multiple daughter cysts without any obvious intraluminal detached membranes with mass effect on the left ventricular outflow tract. After total excision, residual tissue was closed with Teflon patch. Germinative membrane and hundreds of daughter cysts were seen. Following total excision of the cyst from myocardium, myocardial cavity was washed thoroughly with 10% Betadine solution. Pathological examination confirmed the diagnosis of hydatid cyst. Preoperatively started albendazole was continued for 4 weeks even after the operation. On follow-up after 4 weeks, the patient is doing well and cardiac imaging showed normal contours of the heart.

  14. Alcohol Alert: Genetics of Alcoholism

    Science.gov (United States)

    ... daily rhythm for various functions (e.g., body temperature or blood pressure) that is controlled by certain “ ... A special section delves more deeply into specific classes of genes and their relationship to alcoholism. The ...

  15. Alcohol policy and taxation in South Africa: an examination of the economic burden of alcohol tax.

    Science.gov (United States)

    Ataguba, John Ele-Ojo

    2012-01-01

    renewed interest in addressing the problem of rising alcohol abuse, but the extent to which this will translate into meaningful policies is unclear. The use of an excise tax is increasingly being recognized by economists as a way to get around some of the negative effects of abusive alcohol consumption. However, this study indicates that alcohol taxes are regressive in South Africa.

  16. Principles of Periocular Reconstruction following Excision of Cutaneous Malignancy

    Directory of Open Access Journals (Sweden)

    Scott M. Hayano

    2012-01-01

    Full Text Available Reconstruction of periocular defects following excision of cutaneous malignancy can present difficulties for oculofacial and reconstructive surgeons. The intricate anatomy of the eyelids and face requires precise restoration in order to avoid postoperative functional anesthetic concerns. Various reconstructive procedures based on common principles, location and size of the defect, can be applied to achieve restoration with the best possible functional and aesthetic outcomes.

  17. Increased Ac excision (iae): Arabidopsis thaliana mutations affecting Ac transposition

    International Nuclear Information System (INIS)

    Jarvis, P.; Belzile, F.; Page, T.; Dean, C.

    1997-01-01

    The maize transposable element Ac is highly active in the heterologous hosts tobacco and tomato, but shows very much reduced levels of activity in Arabidopsis. A mutagenesis experiment was undertaken with the aim of identifying Arabidopsis host factors responsible for the observed low levels of Ac activity. Seed from a line carrying a single copy of the Ac element inserted into the streptomycin phosphotransferase (SPT) reporter fusion, and which displayed typically low levels of Ac activity, were mutagenized using gamma rays. Nineteen mutants displaying high levels of somatic Ac activity, as judged by their highly variegated phenotypes, were isolated after screening the M2 generation on streptomycin-containing medium. The mutations fall into two complementation groups, iae1 and iae2, are unlinked to the SPT::Ac locus and segregate in a Mendelian fashion. The iae1 mutation is recessive and the iae2 mutation is semi-dominant. The iae1 and iae2 mutants show 550- and 70-fold increases, respectively, in the average number of Ac excision sectors per cotyledon. The IAE1 locus maps to chromosome 2, whereas the SPT::Ac reporter maps to chromosome 3. A molecular study of Ac activity in the iae1 mutant confirmed the very high levels of Ac excision predicted using the phenotypic assay, but revealed only low levels of Ac re-insertion. Analyses of germinal transposition in the iae1 mutant demonstrated an average germinal excision frequency of 3% and a frequency of independent Ac re-insertions following germinal excision of 22%. The iae mutants represents a possible means of improving the efficiency of Ac/Ds transposon tagging systems in Arabidopsis, and will enable the dissection of host involvement in Ac transposition and the mechanisms employed for controlling transposable element activity

  18. Norwegian NOx emissions excise duty hits shipping and offshore industry

    International Nuclear Information System (INIS)

    Gulseth, Oeystein Arff; Fjeld-Nielsen, Siri

    2007-01-01

    The regulatory framework concerning the new excise duty appears as complex and unfinished, raising more questions than providing answers. The duty will entail a significant expense item for the businesses liable to register and it is therefore important to have an overview of how the regulatory framework should be understood. Errors made since 1 January 2007 may lead to future reassessments of duties, with interest (author) (ml)

  19. European Union Harmonized Excise Taxation : Occasional Importation Process

    OpenAIRE

    Tanhua, Taina

    2013-01-01

    This thesis was written with the intent to compile the information related to occasional importation process and European Union harmonized taxation into a single package. The process is based on European Union legislation and the aim of it is to unify the taxation within the internal market area. The national excise duties are not part of the occasional importation process but are partly linked to it. The first part of the thesis discusses the occasional importation of goods subject to ha...

  20. Temporal flap approach for preauricular epidermal cyst excision

    OpenAIRE

    Harshavardhan N Reddy; D R Srinivas; Konappa E Reddy; C Chandrakiran

    2011-01-01

    A 40-year-old male presented with a fluctuant swelling in front of the right ear. His past history is significant for having undergone surgery for the swelling four times in the past 6 years with recurrence each time. We excised the swelling by using a preauricular incision with reverse question mark type extension into the temporal area. The advantages are complete unhindered exposure, excellent cosmesis, and prevention of damage to the temporal branch of facial nerve.

  1. The Gesso Cut for Printmaking

    Science.gov (United States)

    Kelly, Perry; Sarvis, Alva

    1969-01-01

    Directions are given for the preparation, cutting, and printing of a gesso board. A gesso cut is defined as a board coated with gesso into which a design has been impressed. The process is similar to the woodcut, but offers greater textural possibilities. (BF)

  2. Shearer drums - the cutting edge

    Energy Technology Data Exchange (ETDEWEB)

    O' Neill, M.; Wright, C.

    2004-09-15

    The paper discusses continuous miner and shearer cutters. It claims cutting drum require the same level of engineering know-how and technical expertise as do the machines driving them, and that the cutting drum, whether on a longwall shearer or continuous miner, comprises, the steel, pedestals, bit holders and the bits.

  3. Water-Cut Sensor System

    KAUST Repository

    Karimi, Muhammad Akram; Shamim, Atif; Arsalan, Muhammad

    2018-01-01

    Provided in some embodiments is a method of manufacturing a pipe conformable water-cut sensors system. Provided in some embodiments is method for manufacturing a water-cut sensor system that includes providing a helical T-resonator, a helical ground

  4. Alcohol taxation, economic recession, and mortality changes in five European countries

    Directory of Open Access Journals (Sweden)

    Andreeva, Tatiana

    2012-07-01

    Full Text Available BACKGROUND: Since 2008 some mortality decline is observed in several European countries including Latvia, Lithuania, and Ukraine. We hypothesized that this decline could be caused by decreased alcohol use facilitated by both economic recession and alcohol taxation. This study aimed to check this hypothesis.METHODS: Besides the abovementioned countries which suffered from the economic recession and have increased alcohol excise taxes, we considered data from the WHO-Euro mortality database for Poland which did not suffer from GDP decline and Ireland which decreased alcohol excise in 2009. Both per capita GDP growth change (from -18% in Latvia to +2% in Poland and alcohol excise change (from -20% in Ireland to +60% in Ukraine compared to 2008 rates were considered as independent variables. The outcome was percentage of real mortality decline compared to 2009 extrapolation of 2000-2008 trends, which were built using linear regression separately for major groups of death causes earlier shown to have changed in 2009. Population groups aged 30-59 were considered as those whose mortality declined most.RESULTS: Ten percent increase in alcohol excise taxes was associated with 9.4% decline in respiratory mortality from expected rate, 5.7% decline in causes of death related to nervous system, 4.9% decline in external causes of death, 4.8% decline in circulatory system deaths, 3.5% decline in infectious diseases as causes of death. Cardiovascular mortality decline was marginally associated with measurements of economic crisis (0.7% decline per 1% GDP fall.DISCUSSION: During the economic recession, the portion of all-causes mortality that has declined is most likely alcohol-related. Death causes that have mostly declined during the recession are more strongly associated with alcohol taxation than with GDP fall. Cardiovascular deaths decline related to the economic crisis could have been related to diet changes including smaller proportion of fatty and

  5. Endoscope-assisted approach to excision of branchial cleft cysts.

    Science.gov (United States)

    Teng, Stephanie E; Paul, Benjamin C; Brumm, John D; Fritz, Mark; Fang, Yixin; Myssiorek, David

    2016-06-01

    The purpose of this study is to describe an endoscope-assisted surgical technique for the excision of branchial cleft cysts and compare it to the standard approach. Retrospective case series review. Twenty-seven cases described as branchial cleft excisions performed by a single surgeon at one academic medical center were identified between 2007 and 2014. Twenty-five cases (8 endoscopic, 17 standard approach) were included in the study. Cases were excluded if final pathology was malignant. Patient charts were reviewed, and two techniques were compared through analysis of incision size, operative time, and surgical outcomes. This study showed that the length of incision required for the endoscopic approach (mean = 2.13 ± 0.23) was significantly less than that of the standard approach (mean = 4.10 ± 1.46, P = 0.008) despite the fact that there was no significant difference in cyst size between the two groups (P = 0.09). The other variables examined, including operative time and surgical outcomes, were not significantly different between the two groups. This transcervical endoscope-assisted approach to branchial cleft cyst excision is a viable option for uncomplicated cases. It provides better cosmetic results than the standard approach and does not negatively affect outcomes, increase operative time, or result in recurrence. 4. Laryngoscope, 126:1339-1342, 2016. © 2015 The American Laryngological, Rhinological and Otological Society, Inc.

  6. The Impact of Pterygium Excision on Corneal Astigmatism

    International Nuclear Information System (INIS)

    Khan, F. A.; Niazi, S. P. K.; Khan, D. A.

    2014-01-01

    Objective: To compare the corneal astigmatism before and after the excision of pterygium and also to determine the correlation of pterygium size with the postoperative corneal astigmatism. Study Design: Cross-sectional interventional study. Place and Duration of Study: Eye Department, Combined Military Hospital, Abbottabad, from May 2011 to March 2012. Methodology: Thirty patients underwent pterygium excision. Pre-operatively Snellen visual acuity, manifest refraction and slit lamp examination was done. The size of the pterygium was recorded in mm by projecting a horizontal slit lamp beam from the limbus to the apex. All the pterygium were equal to or greater than 2.5 mm. Keratometry was performed with an automated keratometer. Keratometric data was recorded pre-operatively and at 28 days postoperatively. Wilcoxon signed rank test was used for comparing the pre-operative and the postoperative corneal astigmatism. Spearman's rank order was calculated to observe correlation of pterygium size with the postoperative astigmatism. Results: The median (mean rank) pre-operative astigmatism of 2.25 (15.50) reduced to a median (mean rank) postoperative astigmatism of 1.30 (14.96). This decrease in the postoperative astigmatism was statistically significant (p < 0.001). There was a statistically non-significant correlation between the postoperative astigmatism and the pterygium size (rs = -0.29, p = 0.12). Conclusion: Pterygium excision caused significant reduction in corneal astigmatism. (author)

  7. Recombinant methods for screening human DNA excision repair proficiency

    International Nuclear Information System (INIS)

    Athas, W.F.

    1988-01-01

    A method for measuring DNA excision repair in response to ultraviolet radiation (UV)-induced DNA damage has been developed, validated, and field-tested in cultured human lymphocytes. The methodology is amenable to population-based screening and should facilitate future epidemiologic studies seeking to investigate associations between excision repair proficiency and cancer susceptibility. The impetus for such endeavors derives from the belief that the high incidence of skin cancer in the genetic disorder xeroderma pigmentosum (XP) primarily is a result of the reduced capacity of patients cells to repair UV-induced DNA damage. For assay, UV-irradiated non-replicating recombinant plasmid DNA harboring a chloramphenicol acetyltransferase (CAT) indicator gene is introduced into lymphocytes using DEAE-dextran short-term transfection conditions. Exposure to UV induces transcriptionally-inactivating DNA photoproducts in the plasmid DNA which inactivate CAT gene expression. Excision repair of the damaged CAT gene is monitored indirectly as a function of reactivated CAT enzyme activity following a 40 hour repair/expression incubation period

  8. Tubing and cable cutting tool

    Science.gov (United States)

    Mcsmith, D. D.; Richardson, J. I. (Inventor)

    1984-01-01

    A hand held hydraulic cutting tool was developed which is particularly useful in deactivating ejection seats in military aircraft rescue operations. The tool consists primarily of a hydraulic system composed of a fluid reservoir, a pumping piston, and an actuator piston. Mechanical cutting jaws are attached to the actuator piston rod. The hydraulic system is controlled by a pump handle. As the pump handle is operated the actuator piston rod is forced outward and thus the cutting jaws are forced together. The frame of the device is a flexible metal tubing which permits easy positioning of the tool cutting jaws in remote and normally inaccessible locations. Bifurcated cutting edges ensure removal of a section of the tubing or cable to thereby reduce the possibility of accidental reactivation of the tubing or cable being severed.

  9. Cutting method and device underwater

    International Nuclear Information System (INIS)

    Takano, Genta; Kamei, Hiromasa; Beppu, Seiji

    1998-01-01

    A place of material to be cut is surrounded by an openable/closable box. The material to be cut is cut underwater, and materials generated in this case are removed from the cut portion by a pressurized water jet. The removed materials are sucked and recovered together with water in the box. Among the materials caused by the cutting underwater, solid materials not floating on water are caused to stay in the midway of a sucking and recovering channel. A large sucking force might be required for the entire region of the sucking and recovering channel when sucking and recovering large sized solid materials not floating on water, but even large sized materials can be recovered easily according to the present invention since they are recovered after being sucked and stayed in the midway of the sucking and recovering channel. (N.H.)

  10. Cutting concrete with abrasion jet

    International Nuclear Information System (INIS)

    Yie, G.G.

    1982-01-01

    Fluidyne Corporation has developed a unique process and apparatus that allow selected abrasives to be introduced into high-speed waterjet to produce abrasive-entrained waterjet that has high material-cutting capabilities, which is termed by Fluidyne as the Abrasion Jet. Such Abrasion Jet has demonstrated capability in cutting hard rock and concrete at a modest pressure of less than 1360 bars (20,000 psi) and a power input of less than 45 kW (60 horsepower). Abrasion Jet cutting of concrete is characterized by its high rate of cutting, flexible operation, good cut quality, and relatively low costs. This paper presents a general description of this technology together with discussions of recent test results and how it could be applied to nuclear decontamination and decommissioning work. 8 references

  11. Excision of x-ray-induced thymine damage in chromatin from heated cells

    International Nuclear Information System (INIS)

    Warters, R.L.; Roti Roti, J.L.

    1979-01-01

    Experiments were performed to distinguish between two possible modes of hyperthermia-induced inhibition of thymine base damage excision from the DNA of CHO cells: (1) heat denaturation of excision enzyme(s) or (2) heat-induced alteration of the substrate for damage excision (chromatin). While hyperthermia (45 0 C, 15 min) had no apparent effect on the capacity of the excision enzymes to excise damage from DNA it had a dramatic effect (ca. 80% inhibition) on the ability of chromatin to serve as a substrate for unheated enzymes. These results suggest that hyperthermia-induced radiosensitization of CHO cells may be due primarily to lesions in the cellular chromatin

  12. Higher Volume at Time of Breast Conserving Surgery Reduces Re-Excision in DCIS

    Directory of Open Access Journals (Sweden)

    J. H. Wolf

    2011-01-01

    Full Text Available Purpose. The purpose of this study was to compare the surgical and pathological variables which impact rate of re-excision following breast conserving therapy (BCS with or without concurrent additional margin excision (AM. Methods. The pathology database was queried for all patients with DCIS from January 2004 to September 2008. Pathologic assessment included volume of excision, subtype, size, distance from margin, grade, necrosis, multifocality, calcifications, and ER/PR status. Results. 405 cases were identified and 201 underwent BCS, 151-BCS-AM, and 53-mastectomy. Among the 201 BCS patients, 190 underwent re-excision for close or involved margins. 129 of these were treated with BCS and 61 with BCS-AM (P<.0001. The incidence of residual DCIS in the re-excision specimens was 32% (n=65 for BCS and 22% (n=33 for BCS-AM (P<.05. For both the BCS and the BCS-AM cohorts, volume of tissue excised is inversely correlated to the rate of re-excision (P=.0284. Multifocality (P=.0002 and ER status (P=.0382 were also significant predictors for rate of re-excision and variation in surgical technique was insignificant. Conclusions. The rate of positive margins, re-excision, and residual disease was significantly higher in patients with lower volume of excision. The performance of concurrent additional margin excision increases the efficacy of BCS for DCIS.

  13. Effect of Maryland's 2011 Alcohol Sales Tax Increase on Alcohol-Positive Driving.

    Science.gov (United States)

    Lavoie, Marie-Claude; Langenberg, Patricia; Villaveces, Andres; Dischinger, Patricia C; Simoni-Wastila, Linda; Hoke, Kathleen; Smith, Gordon S

    2017-07-01

    The 2011 Maryland alcohol sales tax increase from 6% to 9% provided an opportunity to evaluate the impact on rates of alcohol-positive drivers involved in injury crashes. Maryland police crash reports from 2001 to 2013 were analyzed using an interrupted time series design and a multivariable analysis employing generalized estimating equations models with a negative binomial distribution. Data were analyzed in 2014-2015. There was a significant gradual annual reduction of 6% in the population-based rate of all alcohol-positive drivers (ptax increase. There were no significant changes in rates of alcohol-positive drivers aged 35-54 years (rate ratio, 0.98; 95% CI=0.89, 1.09). Drivers aged ≥55 years had a significant immediate 10% increase in the rate of alcohol-positive drivers (rate ratio, 1.10; 95% CI=1.04, 1.16) and a gradual increase of 4.8% per year after the intervention. Models using different denominators and controlling for multiple factors including a proxy for unmeasured factors found similar results overall. The 2011 Maryland alcohol sales tax increase led to a significant reduction in the rate of all alcohol-positive drivers involved in injury crashes especially among drivers aged 15-34 years. This is the first study to examine the impact of alcohol sales taxes on crashes; previous research focused on excise tax. Increasing alcohol taxes is an important but often neglected intervention to reduce alcohol-impaired driving. Copyright © 2017 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  14. Regge cuts in inclusive reactions

    International Nuclear Information System (INIS)

    Paige, F.E.; Trueman, T.L.

    1975-01-01

    The contribution of Regge cuts to single-particle inclusive processes is analyzed using the techniques of Gribov. The dependence of these contributions on the polarization state of the target is emphasized. A general formula is obtained and certain contributions to it are calculated. It is not possible, however, to reduce this to a simple, powerful formula expressing the total cut contribution in terms of other measurable quantities, as can be done for the cut contribution to the total cross section. The reasons for this are discussed in detail. The single-particle intermediate states, analogous to the absorption model for elastic scattering, are explicitly calculated as an illustration

  15. Laser cutting of Kevlar laminates

    Energy Technology Data Exchange (ETDEWEB)

    VanCleave, R.A.

    1977-09-01

    An investigation has been conducted of the use of laser energy for cutting contours, diameters, and holes in flat and shaped Kevlar 49 fiber-reinforced epoxy laminates as an alternate to conventional machining. The investigation has shown that flat laminates 6.35 mm thick may be cut without backup by using a high-powered (1000-watt) continuous wave CO/sub 2/ laser at high feedrates (33.87 mm per second). The cut produced was free of the burrs and delaminations resulting from conventional machining methods without intimate contact backup. In addition, the process cycle time was greatly reduced.

  16. Preferences of cut flowers consumers

    Directory of Open Access Journals (Sweden)

    Sylwia Kierczyńska

    2010-01-01

    Full Text Available The results of interviews suggest that majority of the cut flowers’ consumers has favourite kind of flower, among which most frequently pointed one was the rose. More than half of the interviewed favour the uniform colour of cut flowers and red colour was the most favourite one. The subtle smell of flowers was the most preferable one but the intensive fragrance was favoured for more consumers than odourless flowers. The data from selected florists’ confirm the information from interviews – in spite of the occasion, roses were the most demanded cut flowers.

  17. Estimating the impact of alcohol policies on youth suicides.

    Science.gov (United States)

    Markowitz, Sara; Chatterji, Pinka; Kaestner, Robert

    2003-03-01

    Alcohol consumption has been identified as one of the most important risk factors for youth suicide. Previous research has shown a strong, empirical link between alcohol use and suicide. If alcohol use is a contributing factor in determining suicidal behaviors, then policies designed to reduce the alcohol consumption may succeed in reducing youth suicides as well. This paper looks at the role of alcohol-related policies in reducing completed suicides by American youths and young adults. This hypothesis comes from two well established relationships: i) the observed correlation between alcohol consumption and incidents of suicide, and ii) the negative relationship between the full price of alcohol and consumption. The alcohol policies examined are excise taxes on beer, measures of alcohol availability, and drunk driving laws. Data on completed suicides for each state in the United States are analyzed for the period 1976-1999. Negative binomial regressions are used to estimate a reduced form model of youth suicide. Suicides are analyzed by gender and age groups (ages 10-14, 15-19 and 20-24). The results indicate that increases in the excise tax on beer are associated with a reduced number of male suicides. This tax, however, has no impact on female suicides. Suicides by males ages 20-24 are positively related to the availability of alcohol, and negatively related to the presence of a 0.08 BAC (blood alcohol concentration) law and a zero tolerance law for drunk driving. Female suicides are not impacted by the availability of alcohol, although the drunk driving laws may impact suicides by teenage females. Policies designed to reduce alcohol consumption may have the unintended benefit of reducing suicides, particularly among young males. While this research shows that alcohol policies may be successful in reducing male suicides, such policies have little impact on female suicides. Future research should explore other potential types of policies and programs to reduce

  18. Overview of Alcohol Consumption

    Science.gov (United States)

    ... of Alcohol Consumption Alcohol's Effects on the Body Alcohol Use Disorder Fetal Alcohol Exposure Support & Treatment Alcohol Policy Special ... experience alcohol’s longer-term effects, which can include: Alcohol use disorder Health problems Increased risk for certain cancers In ...

  19. Regge cuts: A general approach

    International Nuclear Information System (INIS)

    Weis, J.H.

    1976-01-01

    We discuss an approach to the calculation of Regge-cut contributions to scattering amplitudes which relies only on the general structure of the physical Reggeon couplings. It thus allows a unified treatment of disparate models [such as the Feynman (Mandelstam) graph model and the dual model] and a general derivation of the Abramovskii--Gribov--Kancheli (AGK) rules. The structure of the Reggeon couplings is expressed through integrals over complex helicity. The Regge-cut amplitude can then be obtained, and its s-channel discontinuity, taken; there results a direct derivation of a set of ''cutting rules'' which express the total discontinuity as a sum of terms involving various discontinuities of the Reggeon couplings. The equality of these discontinuities follows directly if the singularities in complex helicity are the usual ones. Thus the AGK rules are seen to be quite model independent. Here we study in detail the simplest example: the Reggeon-particle cut in the four-particle amplitude

  20. Materials selection for cutting tools

    International Nuclear Information System (INIS)

    Burkhis, Adel M.

    2008-01-01

    The selection of proper tool steel for a given application is a difficult task. So; the most important selection factors in choosing cutting tool materials are based on their tool material requirements, cutting tool design and service conditions which is mainly considered as functional requirements. The processability requirements concerns in heat treat ability of the material tool. The classification of these tool materials were discussed with their properties requirement and percent of alloying element which is added to give best properties with a little increase in cost that highly appear in comparison of the selection. The cutting tool materials were evaluated based on two cases; The first was in case of rough surface; the high speed steels is the best material and the other was the ceramic material is the highest performance in cutting of soft or high rate of metal removal. (author)

  1. Laser Cutting Tool Path Optimization

    OpenAIRE

    Dewil, Reginald; Cattrysse, Dirk; Vansteenwegen, Pieter

    2011-01-01

    Given a set of irregular parts nested on a metal sheet, minimize the total non- cutting time for the cutter head, cutting all the required elements and returning to the starting location. The problem is modeled as a generalized traveling sales- person problem with special precedence constraints. An initial feasible solution is generated and improved by local moves embedded in a tabu search framework. The proposed algorithm shows promising results in comparison with a commercial...

  2. Economic technology of laser cutting

    Science.gov (United States)

    Fedin, Alexander V.; Shilov, Igor V.; Vassiliev, Vladimir V.; Malov, Dmitri V.; Peskov, Vladimir N.

    2000-02-01

    The laser cutting of color metals and alloys by a thickness more than 2 mm has significant difficulties due to high reflective ability and large thermal conduction. We made it possible to raise energy efficiency and quality of laser cutting by using a laser processing system (LPS) consisting both of the YAG:Nd laser with passive Q-switching on base of LiF:F2- crystals and the CO2 laser. A distinctive feature of the LPS is that the radiation of different lasers incorporated in a coaxial beam has simultaneously high level of peak power (more than 400 kW in a TEM00 mode) and significant level of average power (up to 800 W in a TEM01 mode of the CO2 laser). The application of combined radiation for cutting of an aluminum alloy of D16 type made it possible to decrease the cutting energy threshold in 1.7 times, to increase depth of treatment from 2 up to 4 mm, and velocity from 0.015 up to 0.7 m/min, and also to eliminate application of absorptive coatings. At cutting of steels the velocity of treatment was doubled, and also an oxygen flow was eliminated from the technological process and replaced by the air. The obtained raise of energy efficiency and quality of cutting is explained by an essential size reducing of a formed penetration channel and by the shifting of a thermal cutting mode from melting to evaporation. The evaluation of interaction efficiency of a combined radiation was produced on the basis of non-stationary thermal-hydrodynamic model of a heating source moving as in the cutting direction, and also into the depth of material.

  3. Descriptive Study of Patients Receiving Excision and Radiotherapy for Keloids

    International Nuclear Information System (INIS)

    Speranza, Giovanna; Sultanem, Khalil M.D.; Muanza, Thierry

    2008-01-01

    Purpose: To review and describe our institution's outcomes in patients treated with external beam radiotherapy after keloid excision. Methods and Materials: This was a retrospective study. Patients who received radiotherapy between July 1994 and January 2004 after keloid excision were identified. A questionnaire was mailed regarding sociodemographic factors, early and late radiation toxicities, the need for additional therapy, and satisfaction level. All patients had received a total of 15 Gy in three daily 5-Gy fractions. Treatment started within 24 h after surgery and was delivered on a Siemens orthovoltage machine. The data were analyzed using the STATA statistical package. Results: A total of 234 patients were approached. The response rate was 41%, and 75% were female. The mean age was 36.5 years (range, 16-69 years). The patients were mainly of European (53.1%) or African (19.8%) descent. For early toxicity outcomes, 54.2% reported skin redness and 24% reported skin peeling. For late toxicity outcomes, 27% reported telangiectasia and 62% reported permanent skin color changes. No association was found with gender, skin color, or age for the late toxicity outcomes. Of the patients responding, 14.6% required adjuvant treatment. On a visual scale of 1-10 for the satisfaction level, 60% reported a satisfaction level of ≥8. Telangiectasia was the most significant predictor of a low satisfaction level (≤3, p < 0.005). Conclusion: The results of our study have shown that orthovoltage-based radiotherapy after surgical excision for keloids is a good method for the prevention of relapse. It is well tolerated, causes little toxicity, and leads to a high patient satisfaction level

  4. Inverted 'V' osteotomy excision arthroplasty for bony ankylosed elbows

    Directory of Open Access Journals (Sweden)

    Rex Chadrabose

    2011-12-01

    Full Text Available Abstract Background Bony ankylosis of elbow is challenging and difficult problem to treat. The options are excision arthroplasty and total elbow replacement. We report our midterm results on nine patients, who underwent inverted 'V' osteotomy excision arthroplasty in our hospital with good functional results. Materials Our case series includes 9 patients (seven males and two females with the mean age of 34 years (13-56 years. Five patients had trauma, two had pyogenic arthritis, one had tuberculous arthritis, and one had pyogenic arthritis following surgical fixation. Results The average duration of follow up is 65 months (45 months-80 months. The mean Mayo's elbow performance score (MEPS preoperatively was 48 (35-70. The MEPS at final follow up was 80 (60-95. With no movement at elbow and fixed in various degrees of either flexion or extension preoperatively, the mean preoperative position of elbow was 64°(30°to 100°. The mean post operative range of motion at final follow up was 27°of extension (20-500, 116°of flexion (1100-1300, and the arc of motion was 88°(800-1000. One patient had ulnar nerve neuropraxia and another patient developed median nerve neuropraxia, and both recovered completely in six weeks. No patient had symptomatic instability of the elbow. All patients were asymptomatic except one patient, who had pain mainly on heavy activities. Conclusion We conclude that inverted 'V' osteotomy excision arthroplasty is a viable option in the treatment of bony ankylosis of the elbow in young patients.

  5. Female urogenital dysfunction following total mesorectal excision for rectal cancer

    Directory of Open Access Journals (Sweden)

    Raja Ashraf

    2006-01-01

    Full Text Available Abstract Background The effect of Total Mesorectal Excision (TME on sexual function in the male is well documented. However, there is little literature in female patients. The aim of this study was to review the pelvic autonomic nervous anatomy in the female and to perform a retrospective audit of urinary and sexual function in women following surgery for rectal cancer where TME had been performed. Urogenital dysfunction was assessed through interview and questionnaire. Method Twenty-three questionnaires, eighteen returned, were sent to women with a mean age 65.5 yrs (range 34–86. All had undergone total mesorectal excision for rectal cancer between 1998–2001. Mean follow-up was 18.8 months (range 3–35. Results Preoperatively 5/18 (28% were sexually active, 3/18 (17% of patients described urinary frequency and nocturia and 7/18 (39% described symptoms of stress incontinence prior to surgery. Postoperatively all sexually active patients remained active although all described some discomfort with penetration. Two of the patients sexually active described reduced libido secondary to the stoma. Postoperative urinary symptoms developed with 59% reporting the development of nocturia, 18% developed stress incontinence and one patient required a permanent catheter. Of those with symptoms, 80% persisted longer than three months from surgery. Symptoms were predominant in those patients with low rectal cancers, particularly those undergoing abdomino-perineal excision and in those who had previously undergone abdominal hysterectomy. Conclusion The treatment of rectal cancer involves surgery to the pelvic floor. Despite nerve preservation this is associated with the development of worsening nocturia and stress incontinence. This is most marked in those patients who had previously undergone a hysterectomy. Further studies are warranted to assess the interaction with previous gynaecological surgery.

  6. Abscisic Acid Stimulates Elongation of Excised Pea Root Tips

    Science.gov (United States)

    Gaither, Douglas H.; Lutz, Donald H.; Forrence, Leonard E.

    1975-01-01

    Excised Pisum sativum L. root tips were incubated in a pH 5.2 sucrose medium containing abscisic acid. Elongation growth was inhibited by 100 μm abscisic acid. However, decreasing the abscisic acid concentration caused stimulation of elongation, the maximum response (25% to 30%) occurring at 1 μm abscisic acid. Prior to two hours, stimulation of elongation by 1 μm abscisic acid was not detectable. Increased elongation did not occur in abscisic acid-treated root tips of Lens culinaris L., Phaseolus vulgaris L., or Zea mays L. PMID:16659198

  7. Pyrimidine dimer excision in human cells and skin cancer

    International Nuclear Information System (INIS)

    Regan, J.D.; Carrier, W.L.; Smith, D.P.; Waters, R.

    1977-01-01

    We have compared three different methods for estimating the induction and removal of uv induced pyrimidine dimers from the DNA of human fibroblasts. Results indicate that after uv doses of 5-20 J/m 2 50% of the dimers are removed by 24 hours after irradiation. Almost complete excision can be observed if the cells are incubated for periods not less than 72 hours after 5 J/m 2 . After higher doses it probably takes even longer fr such complete removal to be seen

  8. Excised Abdominoplasty Material as a Systematic Plastic Surgical Training Model

    Directory of Open Access Journals (Sweden)

    M. Erol Demirseren

    2012-01-01

    Full Text Available Achieving a level of technical skill and confidence in surgical operations is the main goal of plastic surgical training. Operating rooms were accepted as the practical teaching venues of the traditional apprenticeship model. However, increased patient population, time, and ethical and legal considerations made preoperation room practical work a must for plastic surgical training. There are several plastic surgical teaching models and simulators which are very useful in preoperation room practical training and the evaluation of plastic surgery residents. The full thickness skin with its vascular network excised in abdominoplasty procedures is an easily obtainable real human tissue which could be used as a training model in plastic surgery.

  9. Use of Preputial Skin as Cutaneous Graft after Nevus Excision

    Directory of Open Access Journals (Sweden)

    A. D'Alessio

    2010-01-01

    Full Text Available We report a four-year-old boy with a nevus covering all the plantar side of his second finger on the left foot. He was also affected by congenital phimosis. Surgical excision of the nevus was indicated, but the skin defect would have been too large to be directly closed. The foreskin was taken as a full-thickness skin graft to cover the cutaneous defect of the finger. The graft intake was favourable and provided a functional repair with good aesthetic characteristic.

  10. Base excision repair mechanisms and relevance to cancer susceptibility

    International Nuclear Information System (INIS)

    Dogliotti, E.; Wilson, S.H.

    2009-01-01

    The base excision repair (BER) pathway is considered the predominant DNA repair system in mammalian cells for eliminating small DNA lesions generated at DNA bases either exogenously by environmental agents or endogenously by normal cellular metabolic processes (e.g. production of oxyradical species, alkylating agents, etc). The main goal of this project is the understanding of the involvement of BER in genome stability and in particular in sporadic cancer development associated with inflammation such as gastric cancer (GC). A major risk factor of GC is the infection by Helicobacter pylori, which causes oxidative stress. Oxidative DNA damage is mainly repaired by BER

  11. Pure transvaginal excision of mesh erosion involving the bladder.

    Science.gov (United States)

    Firoozi, Farzeen; Goldman, Howard B

    2013-06-01

    We present a pure transvaginal approach to the removal of eroded mesh involving the bladder secondary to placement of transvaginal mesh for management of pelvic organ prolapse (POP) using a mesh kit. Although technically challenging, we demonstrate the feasibility of a purely transvaginal approach, avoiding a potentially more morbid transabdominal approach. The video presents the surgical technique of pure transvaginal excision of mesh erosion involving the bladder after mesh placement using a prolapse kit was performed. This video shows that purely transvaginal removal of mesh erosion involving the bladder can be done safely and is feasible.

  12. Burden of fetal alcohol syndrome in a rural West Coast area of South ...

    African Journals Online (AJOL)

    ahead of print) [http://dx.doi.org/ 10.1111/acer.12033] (accessed 19 March 2013). 6. Croxford J, Viljoen D. Alcohol consumption by pregnant women in the Western Cape. S Afr Med J. 1999;89(9):962-965. 7. South African Revenue Services. Excise duties and levies 2012. http://www.sars.gov.za/home.asp?pid=483.

  13. Twice cutting method reduces tibial cutting error in unicompartmental knee arthroplasty.

    Science.gov (United States)

    Inui, Hiroshi; Taketomi, Shuji; Yamagami, Ryota; Sanada, Takaki; Tanaka, Sakae

    2016-01-01

    Bone cutting error can be one of the causes of malalignment in unicompartmental knee arthroplasty (UKA). The amount of cutting error in total knee arthroplasty has been reported. However, none have investigated cutting error in UKA. The purpose of this study was to reveal the amount of cutting error in UKA when open cutting guide was used and clarify whether cutting the tibia horizontally twice using the same cutting guide reduced the cutting errors in UKA. We measured the alignment of the tibial cutting guides, the first-cut cutting surfaces and the second cut cutting surfaces using the navigation system in 50 UKAs. Cutting error was defined as the angular difference between the cutting guide and cutting surface. The mean absolute first-cut cutting error was 1.9° (1.1° varus) in the coronal plane and 1.1° (0.6° anterior slope) in the sagittal plane, whereas the mean absolute second-cut cutting error was 1.1° (0.6° varus) in the coronal plane and 1.1° (0.4° anterior slope) in the sagittal plane. Cutting the tibia horizontally twice reduced the cutting errors in the coronal plane significantly (Pcutting the tibia horizontally twice using the same cutting guide reduced cutting error in the coronal plane. Copyright © 2014 Elsevier B.V. All rights reserved.

  14. 26 CFR 55.4981-2 - Imposition of excise tax with respect to certain undistributed income of real estate investment...

    Science.gov (United States)

    2010-04-01

    ... certain undistributed income of real estate investment trusts; calendar years beginning after December 31... (CONTINUED) MISCELLANEOUS EXCISE TAXES (CONTINUED) EXCISE TAX ON REAL ESTATE INVESTMENT TRUSTS AND REGULATED INVESTMENT COMPANIES Excise Tax on Real Estate Investment Trusts § 55.4981-2 Imposition of excise tax with...

  15. The Molecular Circadian Clock and Alcohol-Induced Liver Injury

    Directory of Open Access Journals (Sweden)

    Uduak S. Udoh

    2015-10-01

    Full Text Available Emerging evidence from both experimental animal studies and clinical human investigations demonstrates strong connections among circadian processes, alcohol use, and alcohol-induced tissue injury. Components of the circadian clock have been shown to influence the pathophysiological effects of alcohol. Conversely, alcohol may alter the expression of circadian clock genes and the rhythmic behavioral and metabolic processes they regulate. Therefore, we propose that alcohol-mediated disruption in circadian rhythms likely underpins many adverse health effects of alcohol that cut across multiple organ systems. In this review, we provide an overview of the circadian clock mechanism and showcase results from new studies in the alcohol field implicating the circadian clock as a key target of alcohol action and toxicity in the liver. We discuss various molecular events through which alcohol may work to negatively impact circadian clock-mediated processes in the liver, and contribute to tissue pathology. Illuminating the mechanistic connections between the circadian clock and alcohol will be critical to the development of new preventative and pharmacological treatments for alcohol use disorders and alcohol-mediated organ diseases.

  16. Validating excised rodent lungs for functional hyperpolarized xenon-129 MRI.

    Directory of Open Access Journals (Sweden)

    David M L Lilburn

    Full Text Available Ex vivo rodent lung models are explored for physiological measurements of respiratory function with hyperpolarized (hp (129Xe MRI. It is shown that excised lung models allow for simplification of the technical challenges involved and provide valuable physiological insights that are not feasible using in vivo MRI protocols. A custom designed breathing apparatus enables MR images of gas distribution on increasing ventilation volumes of actively inhaled hp (129Xe. Straightforward hp (129Xe MRI protocols provide residual lung volume (RV data and permit for spatially resolved tracking of small hp (129Xe probe volumes during the inhalation cycle. Hp (129Xe MRI of lung function in the excised organ demonstrates the persistence of post mortem airway responsiveness to intravenous methacholine challenges. The presented methodology enables physiology of lung function in health and disease without additional regulatory approval requirements and reduces the technical and logistical challenges with hp gas MRI experiments. The post mortem lung functional data can augment histological measurements and should be of interest for drug development studies.

  17. Economic Impact of Imposing Excise Tax on Plastic Bottles of Drinks

    Directory of Open Access Journals (Sweden)

    Eugenia Mardanugraha

    2018-03-01

    Full Text Available This research simulates the effect of imposing excise tax on plastic container of drinks towards economic performance of beverage industry in Indonesia and governmentâ˘A ´Zs tax revenue. The results showed that by imposing excise tax on plastic cups and plastic bottles the government would lose tax revenue from value added tax (PPN and corporate income tax (PPh badan more than they gain additional revenue from excise tax. Hence, imposing excise tax on drink containers should serve a clear purpose and an undeniable reason. This paper recommends the government to develop proper excise infrastructure to extend the goods or services to be taxed. This paper also recommends the required stages for extending the excise tax.

  18. Equilibrium Analysis in Cake Cutting

    DEFF Research Database (Denmark)

    Branzei, Simina; Miltersen, Peter Bro

    2013-01-01

    Cake cutting is a fundamental model in fair division; it represents the problem of fairly allocating a heterogeneous divisible good among agents with different preferences. The central criteria of fairness are proportionality and envy-freeness, and many of the existing protocols are designed...... to guarantee proportional or envy-free allocations, when the participating agents follow the protocol. However, typically, all agents following the protocol is not guaranteed to result in a Nash equilibrium. In this paper, we initiate the study of equilibria of classical cake cutting protocols. We consider one...... of the simplest and most elegant continuous algorithms -- the Dubins-Spanier procedure, which guarantees a proportional allocation of the cake -- and study its equilibria when the agents use simple threshold strategies. We show that given a cake cutting instance with strictly positive value density functions...

  19. Excision repair in MUT-mutants of Proteus mirabilis after UV-irradiation

    International Nuclear Information System (INIS)

    Stoerl, K.; Mund, C.

    1977-01-01

    The behaviour of MUT-mutants of P.mirabilis to perform certain steps of excision repair after U.V.-irradiation is described. MUT-mutants introduce single-strand breaks in the DNA immediately after U.V.-irradiation, but their ability to excise pyrimidine dimers from the DNA is very diminished. Moreover, they are not able to accomplish the excision repair by rejoining of the single-strand breaks. The connection between the incomplete excision repair and the mutator phenotype of these mutants is discussed. (author)

  20. Total mesorectal excision for the treatment of rectal cancer.

    Science.gov (United States)

    Zedan, Ali; Salah, Tareq

    2015-12-01

    In the surgical treatment of rectal cancer, a clear circumferential resection margin and distal resection margin should be obtained. The aim of this study was to determine the morbidity, mortality, survival outcome, and local failure after total mesorectal excision (TME) in the surgical treatment of rectal cancer. This retrospective study was conducted on 101 patients treated for rectal cancer using low anterior resection (LAR), abdominoperinial resection (APR), or Hartmaan's technique. In all operative procedures, total mesorectal excisions (TMEs) were done. The patients were treated from November 2000 to April 2011 in the South Egypt Cancer Institute (SECI) of Assuit University (Egypt). Neo-adjuvant therapy was given to those patients with serosalin filtration, lymph node involvement, and sexual and urinary function impairment. Data were analyzed using IBM-SPSS version 21, and survival rates were estimated using the Kaplan-Meier method. One hundred one patients were evaluable (61 males, 40 females). Regarding the operative procedure used, it was: (APR), LAR, Hartmaan's technique in 15.8%, 71.3%, and 12.9% of patients, respectively. Operation-related mortality during the 30 days after surgery was 3%. The operations resulted in morbidity in 25% of the patients, anastomotic site leak in 5.9% of the patients, urinary dysfynction in 9.9% of the patients, and erectile dysfunction in 15.8% of the male patients. Regarding safety margin, the median distances were distal/radial margin, 23/12 mm, distal limit 7 cm. Median lymph nodes harvest 19 nodes. Primary tumor locations were anteriorly 23.8%, laterally 13.9%, posteriorly 38.6%, and circumferential 23.8%. Protective stoma 16.8%. Primary Tumor TNM classification (T1, T2, T3, and T4; 3, 28.7, 55.4, and 12.9%, respectively). Nodes Metastases (N0, N1, and N2; 57.4, 31.7, and 10.9%, respectively). TNM staging (I, II, III, and IV; 15.8, 29.7, 46.5, and 7.9%, respectively). Chemotherapy was administered to 67.3% of the

  1. Document segmentation via oblique cuts

    Science.gov (United States)

    Svendsen, Jeremy; Branzan-Albu, Alexandra

    2013-01-01

    This paper presents a novel solution for the layout segmentation of graphical elements in Business Intelligence documents. We propose a generalization of the recursive X-Y cut algorithm, which allows for cutting along arbitrary oblique directions. An intermediate processing step consisting of line and solid region removal is also necessary due to presence of decorative elements. The output of the proposed segmentation is a hierarchical structure which allows for the identification of primitives in pie and bar charts. The algorithm was tested on a database composed of charts from business documents. Results are very promising.

  2. Correlation methods in cutting arcs

    Energy Technology Data Exchange (ETDEWEB)

    Prevosto, L; Kelly, H, E-mail: prevosto@waycom.com.ar [Grupo de Descargas Electricas, Departamento Ing. Electromecanica, Universidad Tecnologica Nacional, Regional Venado Tuerto, Laprida 651, Venado Tuerto (2600), Santa Fe (Argentina)

    2011-05-01

    The present work applies similarity theory to the plasma emanating from transferred arc, gas-vortex stabilized plasma cutting torches, to analyze the existing correlation between the arc temperature and the physical parameters of such torches. It has been found that the enthalpy number significantly influence the temperature of the electric arc. The obtained correlation shows an average deviation of 3% from the temperature data points. Such correlation can be used, for instance, to predict changes in the peak value of the arc temperature at the nozzle exit of a geometrically similar cutting torch due to changes in its operation parameters.

  3. Correlation methods in cutting arcs

    International Nuclear Information System (INIS)

    Prevosto, L; Kelly, H

    2011-01-01

    The present work applies similarity theory to the plasma emanating from transferred arc, gas-vortex stabilized plasma cutting torches, to analyze the existing correlation between the arc temperature and the physical parameters of such torches. It has been found that the enthalpy number significantly influence the temperature of the electric arc. The obtained correlation shows an average deviation of 3% from the temperature data points. Such correlation can be used, for instance, to predict changes in the peak value of the arc temperature at the nozzle exit of a geometrically similar cutting torch due to changes in its operation parameters.

  4. Alcoholism and Suicide.

    Science.gov (United States)

    Roy, Alec; Linnoila, Markku

    1986-01-01

    Reviews knowledge about suicide in alcoholism: how commonly suicide among alcoholics occurs; which alcoholics commit suicide and why; suicide among alcoholic women and alcoholic physicians; possible predisposing biological factors; possible linkages with depression, adverse life events, and personality disorder; and future research and directions.…

  5. Cutting temperature measurement and material machinability

    Directory of Open Access Journals (Sweden)

    Nedić Bogdan P.

    2014-01-01

    Full Text Available Cutting temperature is very important parameter of cutting process. Around 90% of heat generated during cutting process is then away by sawdust, and the rest is transferred to the tool and workpiece. In this research cutting temperature was measured with artificial thermocouples and question of investigation of metal machinability from aspect of cutting temperature was analyzed. For investigation of material machinability during turning artificial thermocouple was placed just below the cutting top of insert, and for drilling thermocouples were placed through screw holes on the face surface. In this way was obtained simple, reliable, economic and accurate method for investigation of cutting machinability.

  6. Stresses in ultrasonically assisted bone cutting

    International Nuclear Information System (INIS)

    Alam, K; Mitrofanov, A V; Silberschmidt, V V; Baeker, M

    2009-01-01

    Bone cutting is a frequently used procedure in the orthopaedic surgery. Modern cutting techniques, such as ultrasonic assisted drilling, enable surgeons to perform precision operations in facial and spinal surgeries. Advanced understanding of the mechanics of bone cutting assisted by ultrasonic vibration is required to minimise bone fractures and to optimise the technique performance. The paper presents results of finite element simulations on ultrasonic and conventional bone cutting analysing the effects of ultrasonic vibration on cutting forces and stress distribution. The developed model is used to study the effects of cutting and vibration parameters (e.g. amplitude and frequency) on the stress distributions in the cutting region.

  7. Cutting system for burnable poison rod

    International Nuclear Information System (INIS)

    Shiina, Atsushi; Toyama, Norihide; Koshino, Yasuo; Fujii, Toshio

    1989-01-01

    Burnable poison rods attached to spent fuels are contained in a containing box and transported to a receiving pool. The burnable poison rod-containing box is provisionally situated by the operation to a handling device to a provisional setting rack in a cutting pool and attached to a cutting guide of a cutting device upon cutting. The burnable poison rod is cut only in a cutting pool water and tritium generated upon cutting is dissolved into the cutting pool water. Diffusion of tritium is thus restricted. Further, the cutting pool is isolated by a partition device from the receiving pool during cutting of the burnable poison rod. Accordingly, water in which tritium is dissolved is inhibited from moving to the receiving pool and prevail of tritium contamination can be avoided. (T.M.)

  8. Laser excision of a mucocele: A case report

    Directory of Open Access Journals (Sweden)

    Rajashree Ganguly

    2015-01-01

    Full Text Available A mucous cyst (mucocele, mucous retention cyst, ranula, and epulis is usually a painless, thin sac on the inner surface of the lips. It contains clear fluid. It is painless but can be bothersome. The cyst is thought to be caused due to sucking of the lip membranes between the teeth. A mucous cyst is common and harmless. However, if left untreated, it can organize and form a permanent bump on the inner surface of the lip. A mucous cyst is called ranula when it occurs on the floor of the mouth and epulis when it occurs on the gums. The sac may also be formed around the jewellery (piercings that has been inserted into the lips or the tongue. This article highlights the use of lasers in the treatment of the excision of mucocele.

  9. [A modified technique of liposuction with excision for gynecomastia].

    Science.gov (United States)

    Yang, Hong-Yan; Xu, Jun; Yan, Xiao-Qing; You, Lei

    2007-11-20

    To introduce a modified technique of liposuction with excision for gynecomastia. From 2003 to 2007, 32 cases of gynecomastia were treated with the modified technique: the operative region was divided into central and periphery parts, liposuction was performed only in the periphery part and the deep layer of the central part, while the breast gland in the superficial layer of the central part underwent sharp dissection, the subcutaneous tissue of the central part was conserved, and blood supply was reserved and saucer deformity was avoided. Follow-up was conducted for 3.0 - 18.5 months. Normal men breast appearance was achieved. No complication happened such as hematoma, seroma, saucer deformity, and necrosis in nipple and areola. This modified operative technique for gynecomastia proves to be an excellent and effective technique.

  10. Terahertz pulsed imaging of freshly excised human colonic tissues

    Energy Technology Data Exchange (ETDEWEB)

    Reid, Caroline B; Gibson, Adam P [Department of Medical Physics and Bioengineering, University College London, London, WC1E 6BT (United Kingdom); Fitzgerald, Anthony; Wallace, Vincent P [School of Physics, University of Western Australia, Crawley 6009 (Australia); Reese, George; Tekkis, Paris [Division of Surgery, Chelsea and Westminster Campus, Imperial College London, London (United Kingdom); Goldin, Robert [Centre for Pathology, Imperial College London, St Mary' s Campus, London (United Kingdom); O' Kelly, P S [TeraView Ltd, Platinum Building, St John' s Innovation Park, Cowley Road, Cambridge, CB4 0WS (United Kingdom); Pickwell-MacPherson, Emma, E-mail: c.reid@medphys.ucl.ac.uk [Department of Electronic Engineering, Chinese University of Hong Kong, Shatin, NT (Hong Kong)

    2011-07-21

    We present the results from a feasibility study which measures properties in the terahertz frequency range of excised cancerous, dysplastic and healthy colonic tissues from 30 patients. We compare their absorption and refractive index spectra to identify trends which may enable different tissue types to be distinguished. In addition, we present statistical models based on variations between up to 17 parameters calculated from the reflected time and frequency domain signals of all the measured tissues. These models produce a sensitivity of 82% and a specificity of 77% in distinguishing between healthy and all diseased tissues and a sensitivity of 89% and a specificity of 71% in distinguishing between dysplastic and healthy tissues. The contrast between the tissue types was supported by histological staining studies which showed an increased vascularity in regions of increased terahertz absorption.

  11. Harmonization of chosen excise duty in the EU

    Directory of Open Access Journals (Sweden)

    Petr David

    2008-01-01

    Full Text Available The level and structure of cigarettes taxation are very much in the news these days. In the field of tax on cigarettes in the European Union there is the question of whether specific rate or ad valorem rate should be used. The choice between these two rates depends on primary aim of tax policy in each European Union member state. The founding is that differential excises could be used as pro­tec­tio­nist trade barriers. Decision about tax rate on cigarettes can bring some other related effects. That is the reason why European Union established some restrictions in the field of level and structure of cigarettes taxation.

  12. Terahertz pulsed imaging of freshly excised human colonic tissues

    International Nuclear Information System (INIS)

    Reid, Caroline B; Gibson, Adam P; Fitzgerald, Anthony; Wallace, Vincent P; Reese, George; Tekkis, Paris; Goldin, Robert; O'Kelly, P S; Pickwell-MacPherson, Emma

    2011-01-01

    We present the results from a feasibility study which measures properties in the terahertz frequency range of excised cancerous, dysplastic and healthy colonic tissues from 30 patients. We compare their absorption and refractive index spectra to identify trends which may enable different tissue types to be distinguished. In addition, we present statistical models based on variations between up to 17 parameters calculated from the reflected time and frequency domain signals of all the measured tissues. These models produce a sensitivity of 82% and a specificity of 77% in distinguishing between healthy and all diseased tissues and a sensitivity of 89% and a specificity of 71% in distinguishing between dysplastic and healthy tissues. The contrast between the tissue types was supported by histological staining studies which showed an increased vascularity in regions of increased terahertz absorption.

  13. Reverse-hybrid robotic mesorectal excision for rectal cancer.

    Science.gov (United States)

    Park, In Ja; You, Y Nancy; Schlette, Erika; Nguyen, Sa; Skibber, John M; Rodriguez-Bigas, Miguel A; Chang, George J

    2012-02-01

    The robotic system offers potential technical advantages over laparoscopy for total mesorectal excision with radical lymphadenectomy for rectal cancer. However, the requirement for fixed docking limits its utility when the working volume is large or patient repositioning is required. The purpose of this study was to evaluate short-term outcomes associated with a novel setup to perform total mesorectal excision and radical lymphadenectomy for rectal cancer by the use of a "reverse" hybrid robotic-laparoscopic approach. This is a prospective consecutive cohort observational study of patients who underwent robotic rectal cancer resection from January 2009 to March 2011. During the study period, a technique of reverse-hybrid robotic-laparoscopic rectal resection with radical lymphadenectomy was developed. This technique involves reversal of the operative sequence with lymphovascular and rectal dissection to precede proximal colonic mobilization. This technique evolved from a conventional-hybrid resection with laparoscopic vascular control, colonic mobilization, and robotic pelvic dissection. Perioperative and short-term oncologic outcomes were analyzed. Thirty patients underwent reverse-hybrid resection. Median tumor location was 5 cm (interquartile range 3-9) from the anal verge. Median BMI was 27.6 (interquartile range 25.0-32.1 kg/m). Twenty (66.7%) received neoadjuvant chemoradiation. There were no conversions. Median blood loss was 100 mL (interquartile range 75-200). Total operation time was a median 369 (interquartile range 306-410) minutes. Median docking time was 6 (interquartile range 5-8) minutes, and console time was 98 (interquartile range 88-140) minutes. Resection was R0 in all patients; no patients had an incomplete mesorectal resection. Six patients (20%) underwent extended lymph node dissection or en bloc resection. Reverse-hybrid robotic surgery for rectal cancer maximizes the therapeutic applicability of the robotic and conventional laparoscopic

  14. Amide-conjugated indole-3-acetic acid and adventitious root formation in mung bean cuttings

    International Nuclear Information System (INIS)

    Norcini, J.G.

    1986-01-01

    The purpose of this research was to investigate further the relationship between amide-conjugated auxin and adventitious root formation. Indoleacetylaspartic acid (IAA-aspartate) was positively identified as the predominant conjugate isolated from mung bean cuttings after the cuttings has been treated with 10 -3 M IAA. In cuttings treated with [1- 14 C]IAA immediately after excision (0 hr), the percent of extractable 14 C in IAA-aspartate in the hypocotyl sharply increased until 36 hr, then steadily declined. [ 14 C]IAA was completely metabolized between 12 and 24 hr. The rooting activities of IAA-L-aspartate, IAA-L-alanine, and IAA-glycine were determined at various stages of root formation; some cuttings were pretreated with 10 -3 M IAA at 0 hr. Pretreated cuttings that were treated with IAA-glycine at 12, 24, 36 hr exhibited the greatest consistency between replications, the greatest number of long roots, and the longest roots. The conjugates did not stimulate rooting as effectively as IAA, yet like IAA, generally enhanced rooting the greatest when applied before the first cell division (24 hr)

  15. Wedge cutting of mild steel by CO 2 laser and cut-quality assessment in relation to normal cutting

    Science.gov (United States)

    Yilbas, B. S.; Karatas, C.; Uslan, I.; Keles, O.; Usta, Y.; Yilbas, Z.; Ahsan, M.

    2008-10-01

    In some applications, laser cutting of wedge surfaces cannot be avoided in sheet metal processing and the quality of the end product defines the applicability of the laser-cutting process in such situations. In the present study, CO 2 laser cutting of the wedge surfaces as well as normal surfaces (normal to laser beam axis) is considered and the end product quality is assessed using the international standards for thermal cutting. The cut surfaces are examined by the optical microscopy and geometric features of the cut edges such as out of flatness and dross height are measured from the micrographs. A neural network is introduced to classify the striation patterns of the cut surfaces. It is found that the dross height and out of flatness are influenced significantly by the laser output power, particularly for wedge-cutting situation. Moreover, the cut quality improves at certain value of the laser power intensity.

  16. Chip & Cut Tests an Elastomeren

    OpenAIRE

    Euchler, Eric; Heinrich, Gert; Michael, Hannes; Gehde, Michael; Stocek, Radek; Kratina, Ondrej; Kipscholl, Reinhold

    2016-01-01

    Dieser Vortrag stellt einen neuartigen Prüfstand vor, mit welchem das Chip & Cut Verhalten von Elastomeren charakterisiert werden kann. Sowohl theoretischer Hintergrund als auch praktische Erkenntnisse werden diskutiert. Die Vorstellung der Praxisrelevanz dieser Untersuchungen steht im Fokus des Vortrags.

  17. The Cutting-Edge Challenge

    Science.gov (United States)

    Share, Joani

    2005-01-01

    In a time of educational budget cuts, the arts seem to take the major brunt of the financial ax. Fine arts programs are often pitted against one another for survival. The music industry and supporting corporations, such as American Express, campaign to have instruments donated or purchased to keep educational programs alive. The visual arts do not…

  18. Why I like power cuts...

    CERN Multimedia

    Computer Security Team

    2012-01-01

    Accidental power cuts - a permanent nuisance when running accelerators or computing services, since it takes a lot of time to recover from them. While I feel very sorry for those who are under pressure to get their service running again and deeply regret the loss of down-time and availability, I must admit that I like power cuts: power cuts make computers reboot! And rebooting computers at CERN means all the pending software patches are automatically applied.   But don’t think I am egotistic enough to endorse power cuts. Not necessarily! I am already happy if you regularly patch your computer(s) yourself, where regularly means at least once a month: · If you run a centrally or locally managed Windows computer, give that small orange blinking “CMF” icon in the taskbar a chance in the evening to apply all the pending patches. Also, let it initiate a reboot at the end! · If you have a personal computer with your own Windows operating system, ...

  19. Impact of cigarette taxation policy on excise revenues and cigarette consumption in Uzbekistan

    Directory of Open Access Journals (Sweden)

    Konstantin S. Krasovsky

    2013-05-01

    Full Text Available BACKGROUND: In 2012, Uzbekistan ratified the Framework Convention on Tobacco Control, which states that price and tax measures are an effective means of reducing tobacco consumption. We aimed to explore the effect of taxation policies on revenues and cigarette consumption. METHODS: Data on tax rates, revenues, cigarette sales were taken from national reports. To forecast potential revenues, a scenario analysis was performed. RESULTS: In 1991-2004, ad valorem excise system was in place in Uzbekistan, which was later replaced by the specific excise system. In 1997-2011, the nominal average excise has increased by a factor of twenty, but in real terms, after a sharp increase in 1999, average excise declined annually and increased only in 2010-2011. Annual cigarette sales per capita of adult population in 1999-2007 constituted 17-25 cigarette packs, while in 2008-2011 it increased to 30-37 packs. Four scenarios of excise tax increases in 2012 were developed: one actual scenario based on the rates effective in Uzbekistan in 2012, and three hypothetical ones anticipating excise rates increase by 1.5, 2 and 3-fold. With actual excise increase in 2012, the inflation-adjusted budget revenues would grow by 5%, and with three hypothetical - by 17%, 35% and 66% respectively, despite the decline of tax-paid cigarette sales. CONCLUSION: Stabilization or reduction in cigarette excises in Uzbekistan in 2002-2008 led to a decline in real excise revenues and the growth of cigarette sales. In 1999 and 2010-2011, excises were significantly increased and the real revenues have risen, despite the decline in cigarette sales. As cigarette prices are low, the illegal outflow of cigarettes from Uzbekistan apparently exceeds the illegal inflow. A significant increase in cigarette excise (1.5-3 fold can both increase budget revenues and reduce cigarette consumption, with greater increase yielding more benefits.

  20. Alcoholic Liver Disease

    Science.gov (United States)

    ... may be increased in women because their digestive system may be less able to process alcohol, thus increasing the amount of alcohol reaching the liver. Genetic makeup Genetic makeup is thought to be involved because alcoholic liver disease often ...

  1. Alcohol Use Screening

    Science.gov (United States)

    ... Depression Screening Substance Abuse Screening Alcohol Use Screening Alcohol Use Screening (AUDIT-C) - Instructions The following questions ... this tool, there is also text-only version . Alcohol Use Screening (AUDIT-C) - Manual Instructions The following ...

  2. Alcohol Use Disorders

    Science.gov (United States)

    ... alcohol use disorder” or AUD. AUD is a chronic relapsing brain disease characterized by compulsive alcohol use, loss of control over alcohol intake, and a negative emotional state when not using. ...

  3. Analysis of changes in paper cutting forces during the cutting cycle in single-knife guillotine

    OpenAIRE

    Rusin, Agnieszka; Petriaszwili, Georgij

    2013-01-01

    Paper presents the results of changes in the three components of cutting forces of paper stacks cutting during the cutting cycle in single-knife guillotine. The changes of the three components of cutting force at different stages of cutting cycle were analyzed.

  4. Fetal Alcohol Spectrum Disorders (FASDs): Alcohol Use Quiz

    Science.gov (United States)

    ... Links to Other Websites About Us More CDC Alcohol Topics CDC Alcohol Portal Excessive Alcohol Use Binge ... of alcohol screening and counseling for all women Alcohol Use Quiz Recommend on Facebook Tweet Share Compartir ...

  5. Model for Reggeon-Pomeranchukon cuts

    International Nuclear Information System (INIS)

    Chia, S.

    1977-01-01

    A model is presented for calculating Reggeon-Pomeranchukon cuts, making use explicitly of the Mandelstam diagram. External spins are treated in a natural way. Calculation for the general case is outlined and it is shown that in practical application the cut can be calculated in a standard way. Cuts associated with the exchanges of π, rho, B, and A 2 are considered, and characteristics of the RP cuts, as well as the structure functions, are extracted and discussed. It is found that the model differs considerably from the absorption model. Two suppression schemes are operative which control the magnitudes of cut contributions to amplitudes with ''naturality'' opposite to the Reggeon. The πP cut is found to be a unique case because of the smallness of the pion mass. In general, the RP cuts are self-conspiratorial. At very high energies, all cuts, except πP cut, exhibit quasifactorization

  6. Development of underwater laser cutting technology

    International Nuclear Information System (INIS)

    Sato, Seiichi; Inaba, Takanori; Inose, Koutarou; Matsumoto, Naoyuki; Sakakibara, Yuji

    2015-01-01

    In is desirable to use remote underwater device for the decommissioning work of highly radioactive components such as the nuclear internals from a view point of reducing the ranitidine exposure to the worker. Underwater laser cutting technology has advantages. First advantage in underwater laser cutting technology is that low reaction force during cutting, namely, remote operability is superior. Second point is that underwater laser cutting generates a little amount of secondary waste, because cutting kerf size is very small. Third point is that underwater laser cutting has low risk of the process delay, because device trouble is hard to happen. While underwater laser cutting has many advantages, the careful consideration in the safe treatment of the offgas which underwater laser cutting generates is necessary. This paper describes outline of underwater laser cutting technology developed by IHI Corporation (IHI) and that this technology is effective in various dismantling works in water. (author)

  7. Quality Analysis of Cutting Steel Using Laser

    Directory of Open Access Journals (Sweden)

    Vladislav Markovič

    2013-02-01

    Full Text Available The article explores the quality dependence of the edge surface of steel C45 LST EN 10083-1 obtained cutting the material using laser on different cutting regimes and variations in the thickness of trial steel. The paper presents the influence of the main modes of laser cutting equipment Trulaser 3030, including cutting speed, pressure, angle and the thickness of the surface on the quality characteristics of the sample. The quality of the edge after laser cutting is the most important indicator influencing such technological spread in industry worldwide. Laser cutting is the most popular method of material cutting. Therefore, the article focuses on cutting equipment, cutting defects and methods of analysis. Research on microstructure, roughness and micro-toughness has been performed with reference to edge samples. At the end of the publication, conclusions are drawn.Article in Lithuanian

  8. Quality Analysis of Cutting Steel Using Laser

    Directory of Open Access Journals (Sweden)

    Vladislav Markovič

    2012-12-01

    Full Text Available The article explores the quality dependence of the edge surface of steel C45 LST EN 10083-1 obtained cutting the material using laser on different cutting regimes and variations in the thickness of trial steel. The paper presents the influence of the main modes of laser cutting equipment Trulaser 3030, including cutting speed, pressure, angle and the thickness of the surface on the quality characteristics of the sample. The quality of the edge after laser cutting is the most important indicator influencing such technological spread in industry worldwide. Laser cutting is the most popular method of material cutting. Therefore, the article focuses on cutting equipment, cutting defects and methods of analysis. Research on microstructure, roughness and micro-toughness has been performed with reference to edge samples. At the end of the publication, conclusions are drawn.Article in Lithuanian

  9. Oesophageal pseudodiverticulum after foregut duplication cyst excision: Case report and literature review

    Directory of Open Access Journals (Sweden)

    Iuliana D Bobanga

    2016-01-01

    Full Text Available Oesophageal pseudodiverticula rarely occur after excision of benign oesophageal neoplasms. While management and outcomes have been reported in the adult leiomyoma literature, sparse data exist on the occurrence and management of pseudodiverticula after foregut duplication cyst excision. We discuss our experience with a paediatric patient and review relevant literature regarding operative techniques and surgical outcomes.

  10. Aerodynamic and Nonlinear Dynamic Acoustic Analysis of Tension Asymmetry in Excised Canine Larynges

    Science.gov (United States)

    Devine, Erin E.; Bulleit, Erin E.; Hoffman, Matthew R.; McCulloch, Timothy M.; Jiang, Jack J.

    2012-01-01

    Purpose: To model tension asymmetry caused by superior laryngeal nerve paralysis (SLNP) in excised larynges and apply perturbation, nonlinear dynamic, and aerodynamic analyses. Method: SLNP was modeled in 8 excised larynges using sutures and weights to mimic cricothyroid (CT) muscle function. Weights were removed from one side to create tension…

  11. 77 FR 43157 - Disregarded Entities and the Indoor Tanning Services Excise Tax; Correction

    Science.gov (United States)

    2012-07-24

    ... Disregarded Entities and the Indoor Tanning Services Excise Tax; Correction AGENCY: Internal Revenue Service... tax. DATES: This correction is effective on July 24, 2012, and applies on and after June 25, 2012. FOR... Subjects in 26 CFR Part 301 Employment taxes, Estate taxes, Excise taxes, Gift taxes, Income taxes...

  12. Excision repair of bulky lesions in the DNA of mammalian cells

    International Nuclear Information System (INIS)

    Setlow, R.B.; Grist, E.

    1980-01-01

    The report examines the process of excision repair of pyrimidine dimers from uv-irradiated and chemically challenged human cells. It is shown by means of a sensitive endonuclease assay that the amount of excision observed depends upon the isotope used to label cells, and that XP heterozygotes are between normals and XPs

  13. Connective tissue: cancer patients’ attitudes towards medical research using excised (tumour) tissue

    NARCIS (Netherlands)

    Vermeulen, E.; Schmidt, M.K.; Cornel, M.C.; Knoppers, B.M.; van Leeuwen, F.E.; Aaronson, N.K.

    2011-01-01

    The objective of this article is to explore the views of Dutch cancer patients on the use of excised and stored (tumor) tissues in medical research. Excised tissues are routinely stored in hospitals for future diagnostic use. They are also important for scientific research. This article discusses

  14. Posterior Endoscopic Excision of Os Trigonum in Professional National Ballet Dancers.

    Science.gov (United States)

    Ballal, Moez S; Roche, Andy; Brodrick, Anna; Williams, R Lloyd; Calder, James D F

    2016-01-01

    Previous studies have compared the outcomes after open and endoscopic excision of an os trigonum in patients of mixed professions. No studies have compared the differences in outcomes between the 2 procedures in elite ballet dancers. From October 2005 to February 2010, 35 professional ballet dancers underwent excision of a symptomatic os trigonum of the ankle after a failed period of nonoperative treatment. Of the 35 patients, 13 (37.1%) underwent endoscopic excision and 22 (62.9%) open excision. We compared the outcomes, complications, and time to return to dancing. The open excision group experienced a significantly greater incidence of flexor hallucis longus tendon decompression compared with the endoscopic group. The endoscopic release group returned to full dance earlier at a mean of 9.8 (range 6.5 to 16.1) weeks and those undergoing open excision returned to full dance at a mean of 14.9 (range 9 to 20) weeks (p = .001). No major complications developed in either group, such as deep infection or nerve or vessel injury. We have concluded that both techniques are safe and effective in the treatment of symptomatic os trigonum in professional ballet dancers. Endoscopic excision of the os trigonum offers a more rapid return to full dance compared with open excision. Copyright © 2016 American College of Foot and Ankle Surgeons. Published by Elsevier Inc. All rights reserved.

  15. Re-excision of margins before breast radiation-diagnostic or therapeutic?

    International Nuclear Information System (INIS)

    Chism, Derek B.; Freedman, Gary M.; Li, Tianyu; Anderson, Penny R.

    2006-01-01

    Purpose: To identify factors in breast cancer patients that predict the pathologic results of re-excision for close or positive margins and to determine the effect on local control. Methods and Materials: We divided 1,044 patients with Stage I-II breast cancer with a close (≤2 mm) or positive margin after initial excision into three groups. Group 1 included 199 patients without additional excision, Group 2 included 546 patients with re-excision found to be free of cancer, and Group 3 included 299 patients with re-excision and residual cancer. All patients were treated with radiotherapy with a median follow-up of 6.7 years. Results: The 10-year local control rate was 95% for Group 1 and 94% for Groups 2 and 3 (p = 0.788). Of the 846 patients, 65% had no residual disease on re-excision and 35% did have residual tumor. The factors significantly associated with positive re-excision findings were initial positive margins, positive nodes, Stage T2 tumor, and an extensive intraductal component. The 10-year local control rate was 95% for Group 2 vs. 91% for Group 3 (p = 0.038). Conclusion: The low recurrence rates seen in this study suggest that selected patients with non-negative margins, particularly those with a low risk of having residual disease at re-excision, may be treated with radiotherapy

  16. Fibre laser cutting stainless steel: Fluid dynamics and cut front morphology

    Science.gov (United States)

    Pocorni, Jetro; Powell, John; Deichsel, Eckard; Frostevarg, Jan; Kaplan, Alexander F. H.

    2017-01-01

    In this paper the morphology of the laser cut front generated by fibre lasers was investigated by observation of the 'frozen' cut front, additionally high speed imaging (HSI) was employed to study the fluid dynamics on the cut front while cutting. During laser cutting the morphology and flow properties of the melt film on the cut front affect cut quality parameters such as cut edge roughness and dross (residual melt attached to the bottom of the cut edge). HSI observation of melt flow down a laser cutting front using standard cutting parameters is experimentally problematic because the cut front is narrow and surrounded by the kerf walls. To compensate for this, artificial parameters are usually chosen to obtain wide cut fronts which are unrepresentative of the actual industrial process. This paper presents a new experimental cutting geometry which permits HSI of the laser cut front using standard, commercial parameters. These results suggest that the cut front produced when cutting medium section (10 mm thick) stainless steel with a fibre laser and a nitrogen assist gas is covered in humps which themselves are covered by a thin layer of liquid. HSI observation and theoretical analysis reveal that under these conditions the humps move down the cut front at an average speed of approximately 0.4 m/s while the covering liquid flows at an average speed of approximately 1.1 m/s, with an average melt depth at the bottom of the cut zone of approximately 0.17 mm.

  17. Laser Cutting of Thin Nickel Bellows

    Science.gov (United States)

    Butler, C. L.

    1986-01-01

    Laser cutting technique produces narrow, precise, fast, and repeatable cuts in thin nickel-allow bellows material. Laser cutting operation uses intense focused beam to melt material and assisting gas to force melted material through part thickness, creating void. When part rotated or moved longitudinally, melting and material removal continuous and creates narrow, fast, precise, and repeatable cut. Technique used to produce cuts of specified depths less than material thickness. Avoids distortion, dents, and nicks produced in delicate materials during lathe trimming operations, which require high cutting-tool pressure and holding-fixture forces.

  18. [Circumcision: what do we cut when we are cutting?].

    Science.gov (United States)

    Calcagno, C

    2007-01-01

    The term circumcision refers to partial or complete excision of the foreskin. There are three types of circumcision: ritual circumcision, performed for religious practice, as a rite of passage, usually during neonatal or transpubertal age; prophylactic circumcision, as preventive measure against future potential diseases; therapeutic circumcision, performed because of an evident pathology of the foreskin with clear medical indications. The investigation on the meaning of the ritual circumcision goes beyond the boundaries of the present paper; we are referring to anthropological literature to better understand its origin and reasons. Prophylactic circumcision spread among English-speaking peoples in the nineteenth century as a means against masturbation. In the twentieth century prevention against cancer, urinary infections, sexually transmitted diseases and, eventually, AIDS took over. The controversy about prophylactic circumcision is increasing nowadays in the United States whereas in the other English-speaking countries the procedure has almost disappeared and this represents what Edward Wallerstein calls "the uniquely American medical enigma". There are many interpretations for prophylactic circumcision and its lasting success in the United States. Each explanation probably hits the target only partially because this procedure takes its roots in the cultural history of the above mentioned country and in the relation with its puritan origins. Therapeutic circumcision is performed because of a clear and evident pathology of the prepuce. The embryological development of the prepuce is completed at the sixteenth week of pregnancy. At birth, this tissue covers the glans without an apparent plane of cleavage and should be defined as 'non-retractile prepuce' instead of 'phymosis'. The prepuce in its free development becomes completely retractile at puberty. These evolutionary concepts about prepuce have been described by Douglas Gairdner in 1948 and Jacob Oster in

  19. The generalized good cut equation

    International Nuclear Information System (INIS)

    Adamo, T M; Newman, E T

    2010-01-01

    The properties of null geodesic congruences (NGCs) in Lorentzian manifolds are a topic of considerable importance. More specifically NGCs with the special property of being shear-free or asymptotically shear-free (as either infinity or a horizon is approached) have received a great deal of recent attention for a variety of reasons. Such congruences are most easily studied via solutions to what has been referred to as the 'good cut equation' or the 'generalization good cut equation'. It is the purpose of this paper to study these equations and show their relationship to each other. In particular we show how they all have a four-complex-dimensional manifold (known as H-space, or in a special case as complex Minkowski space) as a solution space.

  20. Water-Cut Sensor System

    KAUST Repository

    Karimi, Muhammad Akram

    2018-01-11

    Provided in some embodiments is a method of manufacturing a pipe conformable water-cut sensors system. Provided in some embodiments is method for manufacturing a water-cut sensor system that includes providing a helical T-resonator, a helical ground conductor, and a separator at an exterior of a cylindrical pipe. The helical T-resonator including a feed line, and a helical open shunt stub conductively coupled to the feed line. The helical ground conductor including a helical ground plane opposite the helical open shunt stub and a ground ring conductively coupled to the helical ground plane. The feed line overlapping at least a portion of the ground ring, and the separator disposed between the feed line and the portion of the ground ring overlapped by the feed line to electrically isolate the helical T-resonator from the helical ground conductor.

  1. Dark exposure of petunia cuttings strongly improves adventitious root formation and enhances carbohydrate availability during rooting in the light.

    Science.gov (United States)

    Klopotek, Yvonne; Haensch, Klaus-Thomas; Hause, Bettina; Hajirezaei, Mohammad-Reza; Druege, Uwe

    2010-05-01

    The effect of temporary dark exposure on adventitious root formation (ARF) in Petuniaxhybrida 'Mitchell' cuttings was investigated. Histological and metabolic changes in the cuttings during the dark treatment and subsequent rooting in the light were recorded. Excised cuttings were exposed to the dark for seven days at 10 degrees C followed by a nine-day rooting period in perlite or were rooted immediately for 16 days in a climate chamber at 22/20 degrees C (day/night) and a photosynthetic photon flux density (PPFD) of 100micromolm(-2)s(-1). Dark exposure prior to rooting increased, accelerated and synchronized ARF. The rooting period was reduced from 16 days (non-treated cuttings) to 9 days (treated cuttings). Under optimum conditions, despite the reduced rooting period, dark-exposed cuttings produced a higher number and length of roots than non-treated cuttings. An increase in temperature to 20 degrees C during the dark treatment or extending the cold dark exposure to 14 days caused a similar enhancement of root development compared to non-treated cuttings. Root meristem formation had already started during the dark treatment and was enhanced during the subsequent rooting period. Levels of soluble sugars (glucose, fructose and sucrose) and starch in leaf and basal stem tissues significantly decreased during the seven days of dark exposure. This depletion was, however, compensated during rooting after 6 and 24h for soluble sugars in leaves and the basal stem, respectively, whereas the sucrose level in the basal stem was already increased at 6h. The association of higher carbohydrate levels with improved rooting in previously dark-exposed versus non-treated cuttings indicates that increased post-darkness carbohydrate availability and allocation towards the stem base contribute to ARF under the influence of dark treatment and provide energy for cell growth subject to a rising sink intensity in the base of the cutting. Copyright 2009 Elsevier GmbH. All rights reserved.

  2. Variable angle asymmetric cut monochromator

    International Nuclear Information System (INIS)

    Smither, R.K.; Fernandez, P.B.

    1993-09-01

    A variable incident angle, asymmetric cut, double crystal monochromator was tested for use on beamlines at the Advanced Photon Source (APS). For both undulator and wiggler beams the monochromator can expand area of footprint of beam on surface of the crystals to 50 times the area of incident beam; this will reduce the slope errors by a factor of 2500. The asymmetric cut allows one to increase the acceptance angle for incident radiation and obtain a better match to the opening angle of the incident beam. This can increase intensity of the diffracted beam by a factor of 2 to 5 and can make the beam more monochromatic, as well. The monochromator consists of two matched, asymmetric cut (18 degrees), silicon crystals mounted so that they can be rotated about three independent axes. Rotation around the first axis controls the Bragg angle. The second rotation axis is perpendicular to the diffraction planes and controls the increase of the area of the footprint of the beam on the crystal surface. Rotation around the third axis controls the angle between the surface of the crystal and the wider, horizontal axis for the beam and can make the footprint a rectangle with a minimum. length for this area. The asymmetric cut is 18 degrees for the matched pair of crystals, which allows one to expand the footprint area by a factor of 50 for Bragg angles up to 19.15 degrees (6 keV for Si[111] planes). This monochromator, with proper cooling, will be useful for analyzing the high intensity x-ray beams produced by both undulators and wigglers at the APS

  3. Drill cuttings mount formation study

    Science.gov (United States)

    Teh, Su Yean; Koh, Hock Lye

    2014-07-01

    Oil, Gas and Energy sector has been identified as an essential driving force in the Malaysian Economic Transformation Programs (ETP). Recently confirmed discovery of many offshore oil and gas deposits in Malaysian waters has ignited new confidence in this sector. However, this has also spurred intense interest on safeguarding the health and environment of coastal waters in Malaysia from adverse impact resulting from offshore oil and gas production operation. Offshore discharge of spent drilling mud and rock cuttings is the least expensive and simplest option to dispose of large volumes of drilling wastes. But this onsite offshore disposal may have adverse environmental impacts on the water column and the seabed. It may also pose occupational health hazards to the workers living in the offshore platforms. It is therefore important to model the transport and deposition of drilling mud and rock cuttings in the sea to enable proper assessment of their adverse impacts on the environment and the workers. Further, accumulation of drill particles on the seabed may impede proper operation of pipelines on the seabed. In this paper, we present an in-house application model TUNA-PT developed to cater to local oil and gas industry needs to simulate the dispersion and mount formation of drill cuttings by offshore oil and gas exploration and production platforms. Using available data on Malaysian coastal waters, simulation analyses project a pile formation on the seabed with a maximum height of about 1 m and pile radius of around 30 to 50 m. Simulated pile heights are not sensitive to the heights of release of the cuttings as the sensitivity has been mitigated by the depth of water.

  4. Lower Lip Reconstruction after Wide Excision of a Malignancy with Barrel-Shaped Excision or the Webster Modification of the Bernard Operation

    Directory of Open Access Journals (Sweden)

    Hyung Joon Seo

    2013-01-01

    Full Text Available BackgroundBecause there are numerous methods for reconstruction of the lower lip, it is not easy to choose the optimal method. In choosing the surgical method for lower lip reconstruction, we obtained acceptable outcomes based on our treatment strategy, which included either a barrel-shaped excision or the Webster modification of the Bernard operation. We report on the surgical outcomes based on our treatment strategy.MethodsThis study included 26 patients who underwent lower lip reconstructive surgery from September 1996 to September 2010. The operation was done using either a barrel-shaped excision or the Webster modification, considering the location of the defect, the size of the defect, and the amount of residual tissue on the lateral side of the vermilion after excision.ResultsIn our series, 3 patients underwent a single barrel-shaped excision, and nine patients underwent a double barrel-shaped excision. In addition, the unilateral Webster modification was performed on in 6 patients, and there were eight cases of bilateral Webster modification. All of the patients except one were satisfied with the postoperative shape of the lip. In one case both recurrence and dehiscence occurred. One patient had a good postoperative lip shape, but had difficulty wearing a denture, and also underwent commissuroplasty. Furthermore, there were two patients who complained of drooling, and 4 with paresthesia.ConclusionsA soft tissue defect resulting from wide excision of a lower lip malignancy can be successfully reconstructed using only one of two surgical methods: the barrel-shaped excision or the Webster modification of the Bernard operation.

  5. Aqueous cutting fluid for machining fissionable materials

    Science.gov (United States)

    Duerksen, Walter K.; Googin, John M.; Napier, Jr., Bradley

    1984-01-01

    The present invention is directed to a cutting fluid for machining fissionable material. The cutting fluid is formed of glycol, water and boron compound in an adequate concentration for effective neutron attenuation so as to inhibit criticality incidents during machining.

  6. Submerged cutting characteristics of abrasive suspension jet

    International Nuclear Information System (INIS)

    Shimizu, Seiji; Peng, Guoyi; Oguma, Yasuyuki; Nishikata, Hiroyuki

    2015-01-01

    An abrasive suspension jet (ASJ) formed by propelling abrasive suspension through a nozzle has a greater cutting capability than the conventional abrasive water jet. However the cutting capability of submerged ASJs decreases drastically with increasing the standoff distance and the pressure around the jet. A sheathed nozzle with ventilation for ASJs has been developed as a mean of extending the effective stand-off distance and improving the cutting capabilities under submerged condition. In the present investigation, cutting tests by ASJs in air and under submerged condition are conducted with specimens of aluminum alloy. Air coated ASJs are formed by using a sheathed nozzle with ventilation. The relative cutting depth is defined as the cutting depth under submerged condition divided by the cutting depth in air at the same standoff distance. The relative cutting depth is arranged effectually by the cavitation number based on the cavity pressure measured at the sheath. (author)

  7. Method of cutting radioactivated metal structures

    International Nuclear Information System (INIS)

    Takimoto, Yoshinori; Sakota, Kotaro; Hamamoto, Noboru; Harada, Keizo.

    1985-01-01

    Purpose: To improve the cutting performance to a level as comparable with that in air, as well as prevent the scattering of the radioactive materials upon cutting to the level as that in water cutting. Method: After igniting a gas cutting torch automatically, water spray by the local water sprayer is started by the actuation of a submerged pump, while a gas cutting manipulator is operated to cut the nuclear reactor pressure vessel. In this way, cutting exhaust gases resulted from the gas cutting torch are water-washed by the spray from the local water sprayer and falls within the nuclear rector pressure vessel in the form of water streams or droplets along the inner wall surface of the pressure vessel. Further, water is fed again to the local water sprayer by the submerged pump. (Kawakami, Y.)

  8. Combining the audit questionnaire and biochemical markers to assess alcohol use and risk of alcohol withdrawal in medical inpatients.

    Science.gov (United States)

    Dolman, Jonathan M; Hawkes, Neil D

    2005-01-01

    Alcohol consumption is often under-reported in patients admitted to general hospitals with acute illness. For alcohol-dependent individuals hospital admission results in an enforced period of abstinence with potential alcohol withdrawal symptoms, and possible life threatening complications. Early detection of alcohol use is therefore beneficial to patients and health services. The purpose of this study was to investigate the performance of the alcohol use disorders identification test (AUDIT) questionnaire in the acute medical setting, and the effect of combining routine biological markers-glutamyltransferase, alanine aminotransferase, aspartate aminotransferase, and mean corpuscular volume (MCV) on its performance in the early identification of in-patients with alcohol use disorders and at risk of developing symptoms of alcohol withdrawal. Prospective study in consecutive patients admitted to an acute medical admissions ward. All patients were screened using the AUDIT questionnaire and routine blood tests. Patients were then monitored for symptoms of withdrawal using clinical institute withdrawal assessment for alcohol (CIWA-Ar). Of the 874 patients screened using the AUDIT, 98 (11%) screened positive of whom 17 (2% of the 874) experienced clinically significant alcohol withdrawal symptoms, when using serial CIWA-Ar. The AUDIT and serial CIWA-Ar detected all patients who went on to manifest acute withdrawal symptoms. There was no loss of sensitivity at an AUDIT cut-off of 13 or more compared with the lower cut-off of 8 or more. A positive predictive value of 17.3% for an AUDIT score of 8 or more in the detection of withdrawal, increased to 47.1% when found in combination with at least two abnormal biological markers whilst maintaining a sensitivity of 94.1% and specificity of 97.9%. These findings confirm that AUDIT is a useful alcohol screen in general medical settings and that its ability to correctly predict which patients will experience alcohol withdrawal is

  9. Post-operative outcomes following the excision of dorsal wrist ganglions with/without the use of Methylene Blue

    Directory of Open Access Journals (Sweden)

    Suleyman Tas

    2016-04-01

    Conclusions: The recurrence of cysts is rare after complete excision, particularly when rupture is prevented. Methylene blue injection is useful for ensuring complete excision and, therefore, to prevent recurrence. [Hand Microsurg 2016; 5(1.000: 1-6

  10. Fetal alcohol syndrome

    Science.gov (United States)

    ... a baby when a mother drinks alcohol during pregnancy. Causes Using alcohol during pregnancy can cause the same risks as using alcohol in general. But it poses extra risks to the unborn baby. When a pregnant woman drinks ... use during pregnancy. Larger amounts of alcohol appear to increase the ...

  11. Turning to alcohol?

    International Nuclear Information System (INIS)

    Reiboro, S.K.

    1998-01-01

    Brazil is examining whether turning to alcohol could solve its problems. The fuel alcohol producers are lobbying hard for the government to increase the use of alcohol to fuel the country's cars. Not only does using alcohol reduce CO 2 , runs the argument, but the Kyoto agreement might just attract international financing for the project. (author)

  12. Clearinghouse: alcohol and poppers.

    Science.gov (United States)

    1999-03-01

    Ten articles from magazines and journals are referenced on the subjects of alcohol and poppers. Topics include alcohol consumption and HIV/AIDS-related risky sexual behavior, alcohol and drug abuse, and self-esteem, gender, and alcohol use. Contact information is provided.

  13. Children of Alcoholics.

    Science.gov (United States)

    Krois, Deborah Helen

    Although alcoholism has long been considered a serious problem, the impact of parental alcoholism on children has only recently begun to receive attention from researchers and clinicians. A review of the empirical literature on children of alcoholics was conducted and it was concluded that children raised in an alcoholic family are at increased…

  14. Fetal Alcohol Exposure

    Science.gov (United States)

    ... categories: 4 » Fetal Alcohol Syndrome (FAS) » Partial FAS (pFAS) » Alcohol-Related Neurodevelopmental Disorder (ARND) » Alcohol-Related Birth ... either prenatally, after birth, or both Partial FAS (pFAS) Partial FAS (pFAS) involves prenatal alcohol exposure, and ...

  15. Retropharyngeal Schwannoma Excised Through a Transoral Approach: A Case Report

    Directory of Open Access Journals (Sweden)

    Chia-Ying Hsieh

    2006-09-01

    Full Text Available The contents of the retropharyngeal space are limited to fat and retropharyngeal nodes. Primary tumors originating from the retropharyngeal space are rare. More than 25% of schwannomas are found in the head and neck region, and they are rarely found in the retropharyngeal space. Here, we report the case of a 44-year-old woman with a schwannoma confined to the left retropharyngeal space, who presented with snoring and a mild lump in the throat sensation. Physical examination revealed anterior bulging of the left oropharyngeal wall, with intact mucosa. Magnetic resonance imaging showed a well-defined, encapsulated tumor in the left retropharyngeal space with bright signal intensity on T2-weighted images and low signal intensity on T1-weighted images, which was strongly enhanced after gadolinium administration. The tumor was removed through a transoral approach, resulting in a short postoperative recovery time without complications. The pathologic diagnosis was schwannoma. The patient has been well and free of tumor recurrence for 2 years. From anatomic and physiologic viewpoints, excision through a transoral approach is a good choice for a confined retropharyngeal schwannoma.

  16. Implication of SUMO E3 ligases in nucleotide excision repair.

    Science.gov (United States)

    Tsuge, Maasa; Kaneoka, Hidenori; Masuda, Yusuke; Ito, Hiroki; Miyake, Katsuhide; Iijima, Shinji

    2015-08-01

    Post-translational modifications alter protein function to mediate complex hierarchical regulatory processes that are crucial to eukaryotic cellular function. The small ubiquitin-like modifier (SUMO) is an important post-translational modification that affects transcriptional regulation, nuclear localization, and the maintenance of genome stability. Nucleotide excision repair (NER) is a very versatile DNA repair system that is essential for protection against ultraviolet (UV) irradiation. The deficiencies in NER function remarkably increase the risk of skin cancer. Recent studies have shown that several NER factors are SUMOylated, which influences repair efficiency. However, how SUMOylation modulates NER has not yet been elucidated. In the present study, we performed RNAi knockdown of SUMO E3 ligases and found that, in addition to PIASy, the polycomb protein Pc2 affected the repair of cyclobutane pyrimidine dimers. PIAS1 affected both the removal of 6-4 pyrimidine pyrimidone photoproducts and cyclobutane pyrimidine dimers, whereas other SUMO E3 ligases did not affect the removal of either UV lesion.

  17. Base Sequence Context Effects on Nucleotide Excision Repair

    Directory of Open Access Journals (Sweden)

    Yuqin Cai

    2010-01-01

    Full Text Available Nucleotide excision repair (NER plays a critical role in maintaining the integrity of the genome when damaged by bulky DNA lesions, since inefficient repair can cause mutations and human diseases notably cancer. The structural properties of DNA lesions that determine their relative susceptibilities to NER are therefore of great interest. As a model system, we have investigated the major mutagenic lesion derived from the environmental carcinogen benzo[a]pyrene (B[a]P, 10S (+-trans-anti-B[a]P-2-dG in six different sequence contexts that differ in how the lesion is positioned in relation to nearby guanine amino groups. We have obtained molecular structural data by NMR and MD simulations, bending properties from gel electrophoresis studies, and NER data obtained from human HeLa cell extracts for our six investigated sequence contexts. This model system suggests that disturbed Watson-Crick base pairing is a better recognition signal than a flexible bend, and that these can act in concert to provide an enhanced signal. Steric hinderance between the minor groove-aligned lesion and nearby guanine amino groups determines the exact nature of the disturbances. Both nearest neighbor and more distant neighbor sequence contexts have an impact. Regardless of the exact distortions, we hypothesize that they provide a local thermodynamic destabilization signal for repair.

  18. Germline excision of transgenes in Aedes aegypti by homing endonucleases.

    Science.gov (United States)

    Aryan, Azadeh; Anderson, Michelle A E; Myles, Kevin M; Adelman, Zach N

    2013-01-01

    Aedes (Ae.) aegypti is the primary vector for dengue viruses (serotypes1-4) and chikungunya virus. Homing endonucleases (HEs) are ancient selfish elements that catalyze double-stranded DNA breaks (DSB) in a highly specific manner. In this report, we show that the HEs Y2-I-AniI, I-CreI and I-SceI are all capable of catalyzing the excision of genomic segments from the Ae. aegypti genome in a heritable manner. Y2-I-AniI demonstrated the highest efficiency at two independent genomic targets, with 20-40% of Y2-I-AniI-treated individuals producing offspring that had lost the target transgene. HE-induced DSBs were found to be repaired via the single-strand annealing (SSA) and non-homologous end-joining (NHEJ) pathways in a manner dependent on the availability of direct repeat sequences in the transgene. These results support the development of HE-based gene editing and gene drive strategies in Ae. aegypti, and confirm the utility of HEs in the manipulation and modification of transgenes in this important vector.

  19. Quantitative imaging of excised osteoarthritic cartilage using spectral CT

    Energy Technology Data Exchange (ETDEWEB)

    Rajendran, Kishore; Bateman, Christopher J.; Younis, Raja Aamir; De Ruiter, Niels J.A.; Ramyar, Mohsen; Anderson, Nigel G. [University of Otago - Christchurch, Department of Radiology, Christchurch (New Zealand); Loebker, Caroline [University of Otago, Christchurch Regenerative Medicine and Tissue Engineering Group, Department of Orthopaedic Surgery and Musculoskeletal Medicine, Christchurch (New Zealand); University of Twente, Department of Developmental BioEngineering, Enschede (Netherlands); Schon, Benjamin S.; Hooper, Gary J.; Woodfield, Tim B.F. [University of Otago, Christchurch Regenerative Medicine and Tissue Engineering Group, Department of Orthopaedic Surgery and Musculoskeletal Medicine, Christchurch (New Zealand); Chernoglazov, Alex I. [University of Canterbury, Human Interface Technology Laboratory New Zealand, Christchurch (New Zealand); Butler, Anthony P.H. [University of Otago - Christchurch, Department of Radiology, Christchurch (New Zealand); European Organisation for Nuclear Research (CERN), Geneva (Switzerland); MARS Bioimaging, Christchurch (New Zealand)

    2017-01-15

    To quantify iodine uptake in articular cartilage as a marker of glycosaminoglycan (GAG) content using multi-energy spectral CT. We incubated a 25-mm strip of excised osteoarthritic human tibial plateau in 50 % ionic iodine contrast and imaged it using a small-animal spectral scanner with a cadmium telluride photon-processing detector to quantify the iodine through the thickness of the articular cartilage. We imaged both spectroscopic phantoms and osteoarthritic tibial plateau samples. The iodine distribution as an inverse marker of GAG content was presented in the form of 2D and 3D images after applying a basis material decomposition technique to separate iodine in cartilage from bone. We compared this result with a histological section stained for GAG. The iodine in cartilage could be distinguished from subchondral bone and quantified using multi-energy CT. The articular cartilage showed variation in iodine concentration throughout its thickness which appeared to be inversely related to GAG distribution observed in histological sections. Multi-energy CT can quantify ionic iodine contrast (as a marker of GAG content) within articular cartilage and distinguish it from bone by exploiting the energy-specific attenuation profiles of the associated materials. (orig.)

  20. Implications of raising cigarette excise taxes in Peru

    Directory of Open Access Journals (Sweden)

    Martin Gonzalez-Rozada

    Full Text Available ABSTRACT Objective To assess how raising cigarette excise taxes in Peru might impact cigarette consumption, and to determine if higher taxes would be regressive. Methods Total demand price elasticity was estimated by income groups using two datasets: quarterly time-series data from 1993 – 2012 and data from a cross-sectional survey of income and expenses conducted in 2008 – 2009 . A functional form of the cigarette demand in Peru was specified using the quarterly data set, and the demand price elasticity was estimated for the short and long run. Using the second data set and Deaton methodology, the implementation of elasticity estimation and by groups’ elasticity was done in a two-step procedure. Results Demand price elasticity was −0.7, implying that a 10% price increase via a new tax would reduce consumption by 7%. Demand price elasticity estimations by income group suggested that poorer families are not more price sensitive than richer ones, which implies that increasing cigarette taxes could be regressive. Conclusions Increasing cigarette taxes is the most efficient policy for inducing a reduction in smoking. However, in the case of Peru, an increase in cigarette taxes could be regressive.

  1. A retrospective study of surgically excised phaeochromocytomas in Newfoundland, Canada

    Directory of Open Access Journals (Sweden)

    Joanna Holland

    2014-01-01

    Full Text Available Objective: A retrospective study detailing the circumstances surrounding diagnosis and treatment of pheochromocytomas with the associated genetic disorders. Materials and Methods: All patients with surgically excised pheochromocytomas in the Health Sciences Center, St. John′s, Newfoundland, Canada between January 2001 and December 2010 were retrospectively analyzed to determine associated familial syndromes, age, tumor size, symptomatology, and percentage of paragangliomas and bilateral pheochromocytomas. Pathology specimen reports, adrenalectomy lists and Meditech (electronic medical record diagnostic codes provided a comprehensive database for this study. Results: Twenty-four patients were studied; familial disorder patients comprised 42% (10/24. Average age at diagnosis was 57 among the sporadic and 34 in familial disorder groups (P = 0.006. Average tumor size was 4.5 cm in the sporadic group and 3 cm in the familial disorder group (P = 0.19. All atypical cases including bilateral or extra-adrenal tumors and malignancy occurred in familial disorder patients. Conclusions: The proportion of familial disorder patients (42% was higher in this study than would be expected, likely a result of the relatively high incidence of hereditary autosomal dominant disorders within Newfoundland. Among familial disorder patients, the average younger age at diagnosis and the smaller tumor size suggest syndromic pheochromocytomas may develop earlier, however they are more likely to be diagnosed sooner due to biochemical surveillance testing in known genetic disorder patients. We also demonstrate a relatively high incidence of surgically resected pheochromocytomas of 4.679/million/year in Newfoundland.

  2. Implication of Posttranslational Histone Modifications in Nucleotide Excision Repair

    Directory of Open Access Journals (Sweden)

    Shisheng Li

    2012-09-01

    Full Text Available Histones are highly alkaline proteins that package and order the DNA into chromatin in eukaryotic cells. Nucleotide excision repair (NER is a conserved multistep reaction that removes a wide range of generally bulky and/or helix-distorting DNA lesions. Although the core biochemical mechanism of NER is relatively well known, how cells detect and repair lesions in diverse chromatin environments is still under intensive research. As with all DNA-related processes, the NER machinery must deal with the presence of organized chromatin and the physical obstacles it presents. A huge catalogue of posttranslational histone modifications has been documented. Although a comprehensive understanding of most of these modifications is still lacking, they are believed to be important regulatory elements for many biological processes, including DNA replication and repair, transcription and cell cycle control. Some of these modifications, including acetylation, methylation, phosphorylation and ubiquitination on the four core histones (H2A, H2B, H3 and H4 or the histone H2A variant H2AX, have been found to be implicated in different stages of the NER process. This review will summarize our recent understanding in this area.

  3. Total Humeral Endoprosthetic Replacement following Excision of Malignant Bone Tumors

    Directory of Open Access Journals (Sweden)

    Suhel Kotwal

    2016-01-01

    Full Text Available Humerus is a common site for malignant tumors. Advances in adjuvant therapies and reconstructive methods provide salvage of the upper limb with improved outcomes. Reports of limb salvage with total humeral replacement in extensive humeral tumors are sparse. We undertook a retrospective study of 20 patients who underwent total humeral endoprosthetic replacement as limb salvage following excision of extensile malignant tumor from 1990 to 2011. With an average followup of 42.9, functional and oncological outcomes were analyzed. Ten patients were still alive at the time of review. Mean estimated blood loss was 1131 mL and duration of surgery was 314 minutes. Deep infection was encountered in one patient requiring debridement while mechanical loosening of ulnar component was identified in one patient. Subluxation of prosthetic humeral head was noted in 3 patients. Mean active shoulder abduction was 12.5° and active flexion was 15°. Incompetence of abduction mechanism was the major determinant of poor active functional outcome. Mean elbow flexion was 103.5° with 30.5° flexion contracture in 10 patients with good and useful hand function. Average MSTS score was 71.5%. Total humeral replacement is a reliable treatment option in restoring mechanical stability and reasonable functional results without compromising patient survival, with low complication rate.

  4. Internet Alcohol Marketing and Underage Alcohol Use.

    Science.gov (United States)

    McClure, Auden C; Tanski, Susanne E; Li, Zhigang; Jackson, Kristina; Morgenstern, Matthis; Li, Zhongze; Sargent, James D

    2016-02-01

    Internet alcohol marketing is not well studied despite its prevalence and potential accessibility and attractiveness to youth. The objective was to examine longitudinal associations between self-reported engagement with Internet alcohol marketing and alcohol use transitions in youth. A US sample of 2012 youths aged 15 to 20 was surveyed in 2011. An Internet alcohol marketing receptivity score was developed, based on number of positive responses to seeing alcohol advertising on the Internet, visiting alcohol brand Web sites, being an online alcohol brand fan, and cued recall of alcohol brand home page images. We assessed the association between baseline marketing receptivity and both ever drinking and binge drinking (≥6 drinks per occasion) at 1-year follow-up with multiple logistic regression, controlling for baseline drinking status, Internet use, sociodemographics, personality characteristics, and peer or parent drinking. At baseline, ever-drinking and binge-drinking prevalence was 55% and 27%, respectively. Many (59%) reported seeing Internet alcohol advertising, but few reported going to an alcohol Web site (6%) or being an online fan (3%). Higher Internet use, sensation seeking, having family or peers who drank, and past alcohol use were associated with Internet alcohol marketing receptivity, and a score of 1 or 2 was independently associated with greater adjusted odds of initiating binge drinking (odds ratio 1.77; 95% confidence interval, 1.13-2.78 and odds ratio 2.15; 95% confidence interval, 1.06-4.37 respectively) but not with initiation of ever drinking. Although high levels of engagement with Internet alcohol marketing were uncommon, most underage youths reported seeing it, and we found a prospective association between receptivity to this type of alcohol marketing and future problem drinking, making additional research and ongoing surveillance important. Copyright © 2016 by the American Academy of Pediatrics.

  5. Internet Alcohol Marketing and Underage Alcohol Use

    Science.gov (United States)

    McClure, Auden C.; Tanski, Susanne E.; Li, Zhigang; Jackson, Kristina; Morgenstern, Matthis; Li, Zhongze; Sargent, James D.

    2016-01-01

    BACKGROUND AND OBJECTIVE Internet alcohol marketing is not well studied despite its prevalence and potential accessibility and attractiveness to youth. The objective was to examine longitudinal associations between self-reported engagement with Internet alcohol marketing and alcohol use transitions in youth. METHODS A US sample of 2012 youths aged 15 to 20 was surveyed in 2011. An Internet alcohol marketing receptivity score was developed, based on number of positive responses to seeing alcohol advertising on the Internet, visiting alcohol brand Web sites, being an online alcohol brand fan, and cued recall of alcohol brand home page images. We assessed the association between baseline marketing receptivity and both ever drinking and binge drinking (≥6 drinks per occasion) at 1-year follow-up with multiple logistic regression, controlling for baseline drinking status, Internet use, sociodemographics, personality characteristics, and peer or parent drinking. RESULTS At baseline, ever-drinking and binge-drinking prevalence was 55% and 27%, respectively. Many (59%) reported seeing Internet alcohol advertising, but few reported going to an alcohol Web site (6%) or being an online fan (3%). Higher Internet use, sensation seeking, having family or peers who drank, and past alcohol use were associated with Internet alcohol marketing receptivity, and a score of 1 or 2 was independently associated with greater adjusted odds of initiating binge drinking (odds ratio 1.77; 95% confidence interval, 1.13–2.78 and odds ratio 2.15; 95% confidence interval, 1.06–4.37 respectively) but not with initiation of ever drinking. CONCLUSIONS Although high levels of engagement with Internet alcohol marketing were uncommon, most underage youths reported seeing it, and we found a prospective association between receptivity to this type of alcohol marketing and future problem drinking, making additional research and ongoing surveillance important. PMID:26738886

  6. Study of Cutting Edge Temperature and Cutting Force of End Mill Tool in High Speed Machining

    Directory of Open Access Journals (Sweden)

    Kiprawi Mohammad Ashaari

    2017-01-01

    Full Text Available A wear of cutting tools during machining process is unavoidable due to the presence of frictional forces during removing process of unwanted material of workpiece. It is unavoidable but can be controlled at slower rate if the cutting speed is fixed at certain point in order to achieve optimum cutting conditions. The wear of cutting tools is closely related with the thermal deformations that occurred between the frictional contact point of cutting edge of cutting tool and workpiece. This research paper is focused on determinations of relationship among cutting temperature, cutting speed, cutting forces and radial depth of cutting parameters. The cutting temperature is determined by using the Indium Arsenide (InAs and Indium Antimonide (InSb photocells to measure infrared radiation that are emitted from cutting tools and cutting forces is determined by using dynamometer. The high speed machining process is done by end milling the outer surface of carbon steel. The signal from the photocell is digitally visualized in the digital oscilloscope. Based on the results, the cutting temperature increased as the radial depth and cutting speed increased. The cutting forces increased when radial depth increased but decreased when cutting speed is increased. The setup for calibration and discussion of the experiment will be explained in this paper.

  7. Extralevator Abdominal Perineal Excision Versus Standard Abdominal Perineal Excision: Impact on Quality of the Resected Specimen and Postoperative Morbidity.

    Science.gov (United States)

    Habr-Gama, Angelita; São Julião, Guilherme P; Mattacheo, Adrian; de Campos-Lobato, Luiz Felipe; Aleman, Edgar; Vailati, Bruna B; Gama-Rodrigues, Joaquim; Perez, Rodrigo Oliva

    2017-08-01

    Abdominal perineal excision (APE) has been associated with a high risk of positive circumferential resection margin (CRM+) and local recurrence rates in the treatment of rectal cancer. An alternative extralevator approach (ELAPE) has been suggested to improve the quality of resection by avoiding coning of the specimen decreasing the risk of tumor perforation and CRM+. The aim of this study is to compare the quality of the resected specimen and postoperative complication rates between ELAPE and "standard" APE. All patients between 1998 and 2014 undergoing abdominal perineal excision for primary or recurrent rectal cancer at a single Institution were reviewed. Between 1998 and 2008, all patients underwent standard APE. In 2009 ELAPE was introduced at our Institution and all patients requiring APE underwent this alternative procedure (ELAPE). The groups were compared according to pathological characteristics, specimen quality (CRM status, perforation and failure to provide the rectum and anus in a single specimen-fragmentation) and postoperative morbidity. Fifty patients underwent standard APEs, while 22 underwent ELAPE. There were no differences in CRM+ (10.6 vs. 13.6%; p = 0.70) or tumor perforation rates (8 vs. 0%; p = 0.30) between APE and ELAPE. However, ELAPE were less likely to result in a fragmented specimen (42 vs. 4%; p = 0.002). Advanced pT-stage was also a risk factor for specimen fragmentation (p = 0.03). There were no differences in severe (Grade 3/4) postoperative morbidity (13 vs. 10%; p = 0.5). Perineal wound dehiscences were less frequent among ELAPE (52 vs 13%; p < 0.01). Despite short follow-up (median 21 mo.), 2-year local recurrence-free survival was better for patients undergoing ELAPE when compared to APE (87 vs. 49%; p = 0.04). ELAPE may be safely implemented into routine clinical practice with no increase in postoperative morbidity and considerable improvements in the quality of the resected specimen of patients with low rectal

  8. Alcohol and Breastfeeding

    DEFF Research Database (Denmark)

    Haastrup, Maija Bruun; Pottegård, Anton; Damkier, Per

    2014-01-01

    While the harmful effects of alcohol during pregnancy are well-established, the consequences of alcohol intake during lactation have been far less examined. We reviewed available data on the prevalence of alcohol intake during lactation, the influence of alcohol on breastfeeding......, the pharmacokinetics of alcohol in lactating women and nursing infants and the effects of alcohol intake on nursing infants. A systematic search was performed in PubMed from origin to May 2013, and 41 publications were included in the review. Approximately half of all lactating women in Western countries consume...... alcohol while breastfeeding. Alcohol intake inhibits the milk ejection reflex, causing a temporary decrease in milk yield. The alcohol concentrations in breast milk closely resemble those in maternal blood. The amount of alcohol presented to nursing infants through breast milk is approximately 5...

  9. THE IMPACT OF VISIONARY LEADERSHIP, LEARNING ORGANIZATION AND INNOVATIVE BEHAVIOR TO PERFORMANCE OF CUSTOMS AND EXCISE FUNCTIONAL

    OpenAIRE

    Anshar, Muhammad

    2017-01-01

    This research aims to determine the impact of visionary leadership, learning organization, and innovative behavior on the performance of Functional Officers of Customs and Excise Inspectors at Tanjung Priok Customs and Excise Main Service Office. The research was conducted at Tanjung Priok Customs and Excise Service Office using the number of samples of 78 Functional Officers of Customs and Excise Inspectors. The sample was selected using simple random sampling technique. Data collection was ...

  10. Optical Cutting Interruption Sensor for Fiber Lasers

    Directory of Open Access Journals (Sweden)

    Benedikt Adelmann

    2015-09-01

    Full Text Available We report on an optical sensor system attached to a 4 kW fiber laser cutting machine to detect cutting interruptions. The sensor records the thermal radiation from the process zone with a modified ring mirror and optical filter arrangement, which is placed between the cutting head and the collimator. The process radiation is sensed by a Si and InGaAs diode combination with the detected signals being digitalized with 20 kHz. To demonstrate the function of the sensor, signals arising during fusion cutting of 1 mm stainless steel and mild steel with and without cutting interruptions are evaluated and typical signatures derived. In the recorded signals the piercing process, the laser switch on and switch off point and waiting period are clearly resolved. To identify the cutting interruption, the signals of both Si and InGaAs diodes are high pass filtered and the signal fluctuation ranges being subsequently calculated. Introducing a correction factor, we identify that only in case of a cutting interruption the fluctuation range of the Si diode exceeds the InGaAs diode. This characteristic signature was successfully used to detect 80 cutting interruptions of 83 incomplete cuts (alpha error 3.6% and system recorded no cutting interruption from 110 faultless cuts (beta error of 0. This particularly high detection rate in combination with the easy integration of the sensor, highlight its potential for cutting interruption detection in industrial applications.

  11. Improving rooting uniformity in rose cuttings

    NARCIS (Netherlands)

    Telgen, van H.J.; Eveleens-Clark, B.A.; Garcia Victoria, N.

    2007-01-01

    Studies to improve rooting uniformity of single node stem cuttings for rose are reported. We found that the variation in shoot growth in a young rose crop depended on the variation in root number of the cuttings, which, in turn, was related to the auxin concentration applied to the cutting before

  12. Cigarette price minimization strategies in the United States: price reductions and responsiveness to excise taxes.

    Science.gov (United States)

    Pesko, Michael F; Licht, Andrea S; Kruger, Judy M

    2013-11-01

    Because cigarette price minimization strategies can provide substantial price reductions for individuals continuing their usual smoking behaviors following federal and state cigarette excise tax increases, we examined independent price reductions compensating for overlapping strategies. The possible availability of larger independent price reduction opportunities in states with higher cigarette excise taxes is explored. Regression analysis used the 2006-2007 Tobacco Use Supplement of the Current Population Survey (N = 26,826) to explore national and state-level independent price reductions that smokers obtained from purchasing cigarettes (a) by the carton, (b) in a state with a lower average after-tax cigarette price than in the state of residence, and (c) in "some other way," including online or in another country. Price reductions from these strategies are estimated jointly to compensate for known overlapping strategies. Each strategy reduced the price of cigarettes by 64-94 cents per pack. These price reductions are 9%-22% lower than conventionally estimated results not compensating for overlapping strategies. Price reductions vary substantially by state. Following cigarette excise tax increases, the price reduction available from purchasing cigarettes by cartons increased. Additionally, the price reduction from purchasing cigarettes in a state with a lower average after-tax cigarette price is positively associated with state cigarette excise tax rates and border state cigarette excise tax rate differentials. Findings from this large, nationally representative study of cigarette smokers suggest that price reductions are larger in states with higher cigarette excise taxes, and increase as cigarette excise taxes rise.

  13. The influence of pH on the excision of UV-photoproducts from HeLa cells

    International Nuclear Information System (INIS)

    Masek, F.; Hochmann, J.; Duraj, J.

    1977-01-01

    Excision of pyrimidine dimers with pH decreasing in UV irradiated HeLa cells can be depressed. This depression is independent of the UV dose within the investigated range. The excision capacity of the HeLa repair system from absolute amount of excised dimers is shown. (author)

  14. Substrate overlap and functional competition between human nucleotide excision repair and Escherichia coli photolyase and (A)BC excision nuclease

    International Nuclear Information System (INIS)

    Sibghat-Ullah; Sancar, Z.

    1990-01-01

    Human cell free extract prepared by the method of Manley et al. carries out repair synthesis on UV-irradiated DNA. Removal of pyrimidine dimers by photoreactivation with DNA photolyase reduces repair synthesis by about 50%. With excess enzyme in the reaction mixture photolyase reduced the repair signal by the same amount even in the absence of photoreactivating light, presumably by binding to pyrimidine dimers and interfering with the binding of human damage recognition protein. Similarly, the UvrB subunit of Escherichia coli (A)BC excinuclease when loaded onto UV-irradiated or psoralen-adducted DNA inhibited repair synthesis by cell-free extract by 75-80%. The opposite was true also as HeLa cell free extract specifically inhibited the photorepair of a thymine dimer by DNA photolyase and its removal by (A)BC excinuclease. Cell-free extracts from xeroderma pigmentosum (XP) complementation groups A and C were equally effective in blocking the E. coli repair proteins, while extracts from complementation groups D and E were ineffective in blocking the E. coli enzyme. These results suggest that XP-D and XP-E cells are defective in the damage recognition subunits(s) of human excision nuclease

  15. Alliance between tobacco and alcohol industries to shape public policy

    Science.gov (United States)

    Jiang, Nan

    2013-01-01

    Aims The tobacco and alcohol industries share common policy goals when facing regulation, opposing policies such as tax increases and advertising restrictions. The collaboration between these two industries in the tobacco policy arena is unknown. This study explored if tobacco and alcohol companies built alliances to influence tobacco legislation, and if so, how those alliances worked. Methods Analysis of previously secret tobacco industry documents. Findings In the early 1980s, tobacco companies started efforts to build coalitions with alcohol and other industries to oppose cigarette excise taxes, clean indoor air policies, and tobacco advertising and promotion constraints. Alcohol companies were often identified as a key partner and source of financial support for the coalitions. These coalitions had variable success interfering with tobacco control policymaking. Conclusions The combined resources of tobacco and alcohol companies may have affected tobacco control legislation. These alliances helped to create the perception that there is a broader base of opposition to tobacco control. Advocates should be aware of the covert alliances between tobacco, alcohol, and other industries and expose them to correct this misperception. PMID:23587076

  16. Frequency and outcomes of biopsy-proven fibroadenomas recommended for surgical excision.

    Science.gov (United States)

    Lee, Shimwoo; Mercado, Cecilia L; Cangiarella, Joan F; Chhor, Chloe M

    2017-12-16

    Our aim was to investigate the outcomes of fibroadenomas recommended for surgical excision due to large size (>2cm) or interval growth. A retrospective review of our institutional radiology database from 2007 to 2015 was performed. We identified 167 biopsy-proven fibroadenomas recommended for surgical consultation. Of these, 75 (45%) cases actually underwent excision, 7 (9%, 95% CI: 4-18%) of which were upgraded to phyllodes tumors upon histopathological examination. Our results support the current recommendation to surgically excise breast lesions diagnosed as fibroadenomas with size >2cm or with interval growth due to the considerable risk of finding phyllodes tumors. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Involvement of UV-inducible repair in pyrimidine dimer excision in Escherichia coli

    International Nuclear Information System (INIS)

    Masek, F.; Sedliakova, M.

    1978-01-01

    The influence of UV radiation on pyrimidine dimer excision in the cells of three excision-proficient E.coli strains was studied. For this purpose cells were irradiated with a first fluence of 300 ergs/mm 2 and at different time intervals with a second fluence of 500 ergs/mm 2 . After the second fluence dimer excision was found to be partly inhibited in E.coli B/r Hcr + and E.coli 15 555-7, but not in E.coli K12 SR20. (author)

  18. Induction of the Tn10 Precise Excision in E. coli Cells after Accelerated Heavy Ions Irradiation

    CERN Document Server

    Zhuravel, D V

    2003-01-01

    The influence of the irradiation of different kinds on the indication of the structural mutations in the bacteria Escherichia coli is considered. The regularities of the Tn10 precise excision after accelerated ^{4}He and ^{12}C ions irradiations with different linear energy transfer (LET) were investigated. Dose dependences of the survival and relative frequency of the Tn10 precise excision were obtained. It was shown, that the relative frequency of the Tn10 precise excision is the exponential function from the irradiation dose. Relative biological efficiency (RBE), and relative genetic efficiency (RGE) were calculated, and were treated as the function of the LET.

  19. Periprosthetic soft tissue recurrence of chondroblastoma after attempted en bloc excision from the proximal humerus

    Energy Technology Data Exchange (ETDEWEB)

    Hammond, G.W.; Tehranzadeh, J.; Hoang, B.H. [University of California, Irvine, Department of Orthopaedic Surgery, Orange (United States); Gu, M. [University of California, Irvine, Department of Pathology, Orange (United States)

    2006-01-01

    A case of soft tissue recurrence of chondroblastoma after attempted en bloc excision and endoprosthetic replacement is described. This tumor in the proximal humerus recurred after initial curettage and was subsequently treated by attempted en bloc excision with positive microscopic margins. The patient then presented with a large soft tissue recurrence surrounding the endoprosthesis. This periprosthetic recurrence necessitated re-excision and revision of the endoprosthesis. Recurrence is not uncommon following curettage of chondroblastoma. However, less is known about soft tissue recurrence after en bloc resection of this tumor with positive margins. A subset of chondroblastoma may exist with more locally aggressive behavior. (orig.)

  20. DNA excision repair as a component of adaptation to low doses of ionizing radiation Escherichia coli

    International Nuclear Information System (INIS)

    Huang, H.; Claycamp, H.G.

    1993-01-01

    In this study the authors examined whether or not DNA excision repair is a component of adaptation induced by very low-dose ionizing radiation in Escherichia coli, a well-characterized prokaryote, and investigated the relationship between enhanced excision repair and the SOS response. Their data suggest that there seems to be narrow 'windows' of dose-effect for the induction of SOS-independent DNA excision repair. Being similar to mammalian cell studies, the dose range for this effect was about 200-fold less than D 37 for radiation survival. (author)

  1. Involvement of UV-inducible repair in pyrimidine dimer excision in Escherichia coli

    Energy Technology Data Exchange (ETDEWEB)

    Masek, F; Sedliakova, M [Slovenska Akademia Vied, Bratislava (Czechoslovakia)

    1978-11-15

    The influence of UV radiation on pyrimidine dimer excision in the cells of three excision-proficient E.coli strains was studied. For this purpose cells were irradiated with a first fluence of 300 ergs/mm/sup 2/ and at different time intervals with a second fluence of 500 ergs/mm/sup 2/. After the second fluence dimer excision was found to be partly inhibited in E.coli B/r Hcr/sup +/ and E.coli 15 555-7, but not in E.coli K12 SR20.

  2. Cutting costs without drawing blood.

    Science.gov (United States)

    Copeland, T

    2000-01-01

    When looking for ways to cut costs, most managers reach for the head-count hatchet, and the markets usually roar with approval. But a company can almost always create far more sustainable value by rigorously evaluating the small-ticket capital items that often get rubber-stamped. Drawing on his experience as a consultant and providing numerous anecdotes, the author contends that those "little" requests often prove to be gold plated or unnecessary. A disciplined evaluation involves asking only eight questions and conducting postmortems--regular audits of units' capital spending. But the payoff is enormous. Because cutting the capital budget increases cash flow, the author argues that a permanent cut of just 15% in the planned level of capital spending could boost some companies' market capitalization by as much as 30%. The first three questions--Is this your investment to make? Does it really have to be new? How are our competitors meeting compliance needs?--are asked of operating managers as they assemble capital project requests. The next three are asked by senior managers of themselves and their colleagues as they examine proposals: Is the left hand duplicating investments made by the right? Are trade-offs between profit and capital spending well understood? Are there signs of budget massage? At the end of the review process, senior managers ask: Are we fully using shared assets? How fine-grained are our capacity measures? The author's suggestions for the postmortem include searching for systematic problems with whole classes of expenditures and making sure audit teams come up with specific recommendations for change.

  3. Free-piston cutting machine

    Science.gov (United States)

    Ciccarelli, Gaby; Subudhi, Manomohan; Hall, Robert E.

    2000-01-01

    A cutting machine includes a gun barrel for receiving a projectile. A compression tube is disposed in flow communication with the barrel and includes a piston therein. A reservoir is disposed in flow communication with the tube and receives a first gas under pressure. A second gas fills the compression tube on a front face of the piston. And, the pressurized first gas is discharged into the tube on a back face of the piston to accelerate the piston through the tube for compressing the second gas, and in turn launching the projectile through the barrel to impact a workpiece.

  4. Clinically lean; "cutting the crap".

    Science.gov (United States)

    Caldwell, G

    2012-01-01

    Proponents of Lean Philosophy believe that successful businesses must reduce waste in working time and resources to a minimum, and maximise their use in productive work. The productive work of the Acute Medical Unit is to provide effective clinical management to a daily cohort of acutely ill patients. Many Clinicians are cynical about Lean. In this article, Dr Caldwell discusses how many clinicians complain of too much crap in the workplace, which gets in the way of swift, safe high quality clinical care. He argues that "Cutting the Crap" in the Acute Medical Unit is entirely consistent with Lean approaches to management of complex systems.

  5. Laser Cutting of Carbon Fiber Fabrics

    Science.gov (United States)

    Fuchs, A. N.; Schoeberl, M.; Tremmer, J.; Zaeh, M. F.

    Due to their high weight-specific mechanical stiffness and strength, parts made from carbon fiber reinforced polymers (CFRP) are increasingly used as structural components in the aircraft and automotive industry. However, the cutting of preforms, as with most automated manufacturing processes for CFRP components, has not yet been fully optimized. This paper discusses laser cutting, an alternative method to the mechanical cutting of preforms. Experiments with remote laser cutting and gas assisted laser cutting were carried out in order to identify achievable machining speeds. The advantages of the two different processes as well as their fitness for use in mass production are discussed.

  6. Automated Laser Cutting In Three Dimensions

    Science.gov (United States)

    Bird, Lisa T.; Yvanovich, Mark A.; Angell, Terry R.; Bishop, Patricia J.; Dai, Weimin; Dobbs, Robert D.; He, Mingli; Minardi, Antonio; Shelton, Bret A.

    1995-01-01

    Computer-controlled machine-tool system uses laser beam assisted by directed flow of air to cut refractory materials into complex three-dimensional shapes. Velocity, position, and angle of cut varied. In original application, materials in question were thermally insulating thick blankets and tiles used on space shuttle. System shapes tile to concave or convex contours and cuts beveled edges on blanket, without cutting through outer layer of quartz fabric part of blanket. For safety, system entirely enclosed to prevent escape of laser energy. No dust generated during cutting operation - all material vaporized; larger solid chips dislodged from workpiece easily removed later.

  7. Ku80-deleted cells are defective at base excision repair

    International Nuclear Information System (INIS)

    Li, Han; Marple, Teresa; Hasty, Paul

    2013-01-01

    Graphical abstract: - Highlights: • Ku80-deleted cells are hypersensitive to ROS and alkylating agents. • Cells deleted for Ku80, but not Ku70 or Lig4, have reduced BER capacity. • OGG1 rescues hypersensitivity to H 2 O 2 and paraquat in Ku80-mutant cells. • Cells deleted for Ku80, but not Lig4, are defective at repairing AP sites. • Cells deleted for Ku80, but not Lig4 or Brca2 exon 27, exhibit increased PAR. - Abstract: Ku80 forms a heterodimer with Ku70, called Ku, that repairs DNA double-strand breaks (DSBs) via the nonhomologous end joining (NHEJ) pathway. As a consequence of deleting NHEJ, Ku80-mutant cells are hypersensitive to agents that cause DNA DSBs like ionizing radiation. Here we show that Ku80 deletion also decreased resistance to ROS and alkylating agents that typically cause base lesions and single-strand breaks (SSBs). This is unusual since base excision repair (BER), not NHEJ, typically repairs these types of lesions. However, we show that deletion of another NHEJ protein, DNA ligase IV (Lig4), did not cause hypersensitivity to these agents. In addition, the ROS and alkylating agents did not induce γ-H2AX foci that are diagnostic of DSBs. Furthermore, deletion of Ku80, but not Lig4 or Ku70, reduced BER capacity. Ku80 deletion also impaired BER at the initial lesion recognition/strand scission step; thus, involvement of a DSB is unlikely. Therefore, our data suggests that Ku80 deletion impairs BER via a mechanism that does not repair DSBs

  8. Ku80-deleted cells are defective at base excision repair

    Energy Technology Data Exchange (ETDEWEB)

    Li, Han [The University of Texas Health Science Center at San Antonio, The Institute of Biotechnology, The Department of Molecular Medicine, 15355 Lambda Drive, San Antonio, TX 78245-3207 (United States); Tumor Suppression Group, Spanish National Cancer Research Centre (CNIO), Madrid 28029 (Spain); Marple, Teresa [The University of Texas Health Science Center at San Antonio, The Institute of Biotechnology, The Department of Molecular Medicine, 15355 Lambda Drive, San Antonio, TX 78245-3207 (United States); Hasty, Paul, E-mail: hastye@uthscsa.edu [The University of Texas Health Science Center at San Antonio, The Institute of Biotechnology, The Department of Molecular Medicine, 15355 Lambda Drive, San Antonio, TX 78245-3207 (United States); Tumor Suppression Group, Spanish National Cancer Research Centre (CNIO), Madrid 28029 (Spain)

    2013-05-15

    Graphical abstract: - Highlights: • Ku80-deleted cells are hypersensitive to ROS and alkylating agents. • Cells deleted for Ku80, but not Ku70 or Lig4, have reduced BER capacity. • OGG1 rescues hypersensitivity to H{sub 2}O{sub 2} and paraquat in Ku80-mutant cells. • Cells deleted for Ku80, but not Lig4, are defective at repairing AP sites. • Cells deleted for Ku80, but not Lig4 or Brca2 exon 27, exhibit increased PAR. - Abstract: Ku80 forms a heterodimer with Ku70, called Ku, that repairs DNA double-strand breaks (DSBs) via the nonhomologous end joining (NHEJ) pathway. As a consequence of deleting NHEJ, Ku80-mutant cells are hypersensitive to agents that cause DNA DSBs like ionizing radiation. Here we show that Ku80 deletion also decreased resistance to ROS and alkylating agents that typically cause base lesions and single-strand breaks (SSBs). This is unusual since base excision repair (BER), not NHEJ, typically repairs these types of lesions. However, we show that deletion of another NHEJ protein, DNA ligase IV (Lig4), did not cause hypersensitivity to these agents. In addition, the ROS and alkylating agents did not induce γ-H2AX foci that are diagnostic of DSBs. Furthermore, deletion of Ku80, but not Lig4 or Ku70, reduced BER capacity. Ku80 deletion also impaired BER at the initial lesion recognition/strand scission step; thus, involvement of a DSB is unlikely. Therefore, our data suggests that Ku80 deletion impairs BER via a mechanism that does not repair DSBs.

  9. Oncological outcome after laparoscopic abdominoperineal excision of the rectum.

    Science.gov (United States)

    Jefferies, M T; Evans, M D; Hilton, J; Chandrasekaran, T V; Beynon, J; Khot, U

    2012-08-01

    Abdominoperineal excision of the rectum (APER) for cancer has been associated with higher circumferential resection margin (CRM) involvement and failure of local disease control. The aim of this study was to investigate whether the introduction of laparoscopic APER altered the incidence of CRM involvement. Consecutive patients undergoing open or laparoscopic APER for adenocarcinomas of the rectum were studied. Patient demographics, preoperative staging, neoadjuvant treatment, operative findings, length of stay and pathological details were collected from operative and radiology databases and compared. There were 16 laparoscopic and 25 open APER performed over a 3-year period. Neoadjuvant therapy was given to 43.8% (7/16) of the laparoscopic group and 56.0% (14/25) of the open group. Complete laparoscopic resection was possible in 14 (87.5%) of 16 patients. The median harvested number of nodes was 14 (4-33) in both groups. The median length of stay was 7 (3-13) and 15 (9-40) days in the laparoscopic and open groups (P CRM was clear in all cases. There was no local recurrence in either group at a median follow-up of 23 months. There were no in-hospital deaths and no significant differences in overall survival. There were no significant differences in preoperative or postoperative histopathological T stage between the two groups (P = 0.057 and P = 0.121). Laparoscopic APER for selected rectal cancers can achieve comparable oncological outcome to open surgery but is associated with a much shorter length of stay. Patient and tumour characteristics must be taken into consideration when deciding on a laparoscopic approach for low rectal cancer. © 2011 The Authors. Colorectal Disease © 2011 The Association of Coloproctology of Great Britain and Ireland.

  10. Base excision repair deficiency in acute myeloid leukemia

    International Nuclear Information System (INIS)

    Scheer, N.M.

    2009-01-01

    Acute myeloid leukemia (AML) is an aggressive malignancy of the hematopoietic system arising from a transformed myeloid progenitor cell. Genomic instability is the hallmark of AML and characterized by a variety of cytogenetic and molecular abnormalities. Whereas 10% to 20% of AML cases reflect long-term sequelae of cytotoxic therapies for a primary disorder, the etiology for the majority of AMLs remains unknown. The integrity of DNA is under continuous attack from a variety of exogenous and endogenous DNA damaging agents. The majority of DNA damage is caused by constantly generated reactive oxygen species (ROS) resulting from metabolic by-products. Base excision repair (BER) is the major DNA repair mechanism dealing with DNA base lesions that are induced by oxidative stress or alkylation. In this study we investigated the BER in AML. Primary AML patients samples as well as AML cell lines were treated with hydrogen peroxide (H 2 O 2 ). DNA damage induction and repair was monitored by the alkaline comet assay. In 15/30 leukemic samples from patients with therapy-related AML, in 13/35 with de novo AML and 14/26 with AML following a myelodysplastic syndrome, significantly reduced single strand breaks (SSBs) representing BER intermediates were found. In contrast, normal SSB formation was seen in mononuclear cells of 30 healthy individuals and 30/31 purified hematopoietic stem- and progenitor cell preparations obtained from umbilical cord blood. Additionally, in 5/10 analyzed AML cell lines, no SSBs were formed upon H 2 O 2 treatment, either. Differences in intracellular ROS concentrations or apoptosis could be excluded as reason for this phenomenon. A significantly diminished cleavage capacity for 7,8-dihydro-8-oxoguanine as well as for Furan was observed in cell lines that exhibited no SSB formation. These data demonstrate for the first time that initial steps of BER are impaired in a proportion of AML cell lines and leukemic cells from patients with different forms of

  11. Rooting of stem cuttings of ixora

    Directory of Open Access Journals (Sweden)

    Aline De Souza Silva

    2015-08-01

    Full Text Available The ixora is ornamental plant widely used in landscaping. In order to maximize the propagation of cuts, we evaluated the concentrations of auxin (indolbutiric acid and the presence of leaves on the rooting in cuts of Ixora coccinea L. The experiment was conducted in randomized block design, in factorial design 3x4, with three types of cuts (without leaf, with two or four leaves, four concentrations of indolbutiric acid (0, 1000, 2000 and 4000 mg L-1, with four replications and 10 cuts in each experimental unit. After 53 days of implantation the experiment, evaluated the survival(%, rooting(%, sprouting(%, formation of callus(%, number, length and biomass of roots formed. The interaction of the type of cuts with concentrations of auxin was not significant for any of the variables analyzed. The survival of cuttings was not influenced by the treatments. Cuts with two or four leaves presented rooting and length of roots above the cuttings without leaves. The application of auxin does not substitute the presence of leaf in cuts of ixora in vegetative propagation. The vegetative propagation by cut of ixora can be made without application of auxin, and the leaves must be maintained in the cuttings.

  12. Cutting method and cutting device for spent fuel rod of nuclear reactor

    International Nuclear Information System (INIS)

    Komatsu, Masahiko; Ose, Toshihiko.

    1996-01-01

    A control rod transferred under water in a vertically suspended state is postured horizontally at such a water depth that radiations can be shielded, and then it is cut to a dropping speed limiting portion and a cross-like main body. The separated cross-like main body portion is further cut in the longitudinal direction and separated into a pair of cut pieces each having an L-shaped cross section. A disk like metal saw is used as a cutting tool. Alternatively, a plasma jet cutter or a melting-type water jet cutter is used as a cutting tool. Then, since the spent control rod to be cut is postured horizontally under water, the water depth for the cutting position can be reduced. As a result, the cutting state using the cutting tool can be observed by naked eyes from the position above the water surface thereby enabling to perform the cutting operation reliably. (N.H.)

  13. Laparoscopic versus open total mesorectal excision for rectal cancer.

    Science.gov (United States)

    Vennix, Sandra; Pelzers, Loeki; Bouvy, Nicole; Beets, Geerard L; Pierie, Jean-Pierre; Wiggers, Theo; Breukink, Stephanie

    2014-04-15

    Colorectal cancer including rectal cancer is the third most common cause of cancer deaths in the western world. For colon carcinoma, laparoscopic surgery is proven to result in faster postoperative recovery, fewer complications and better cosmetic results with equal oncologic results. These short-term benefits are expected to be similar for laparoscopic rectal cancer surgery. However, the oncological safety of laparoscopic surgery for rectal cancer remained controversial due to the lack of definitive long-term results. Thus, the expected short-term benefits can only be of interest when oncological results are at least equal. To evaluate the differences in short- and long-term results after elective laparoscopic total mesorectal excision (LTME) for the resection of rectal cancer compared with open total mesorectal excision (OTME). We searched the Cochrane Central Register of Controlled Trials (CENTRAL, The Cochrane Library 2013, Issue 2), MEDLINE (January 1990 to February 2013), EMBASE (January 1990 to February 2013), ClinicalTrials.gov (February 2013) and Current Controlled Trials (February 2013). We handsearched the reference lists of the included articles for missed studies. Only randomised controlled trials (RCTs) comparing LTME and OTME, reporting at least one of our outcome measures, was considered for inclusion. Two authors independently assessed study quality according to the CONSORT statement, and resolved disagreements by discussion. We rated the quality of the evidence using GRADE methods. We identified 45 references out of 953 search results, of which 14 studies met the inclusion criteria involving 3528 rectal cancer patients. We did not consider the risk of bias of the included studies to have impacted on the quality of the evidence. Data were analysed according to an intention-to-treat principle with a mean conversion rate of 14.5% (range 0% to 35%) in the laparoscopic group.There was moderate quality evidence that laparoscopic and open TME had similar

  14. Quantitative characterization of pyrimidine dimer excision from UV-irradiated DNA (excision capacity) by cell-free extracts of the yeast Saccharomyces cerevisiae

    International Nuclear Information System (INIS)

    Bekker, M.L.; Kaboev, O.K.; Akhmedov, A.T.; Luchkina, L.A.

    1984-01-01

    Cell-free extracts from wild-type yeast (RAD + ) and from rad mutants belonging to the RAD3 epistatic group (rad1-1, rad2-1, rad3-1, rad4-1) contain activities catalyzing the excision of pyrimidine dimers (PD) from purified ultraviolet-irradiated DNA which was not pre-treated with exogenous UV-endonuclease. The level of these activities in cell-free extracts from rad mutants did not differ from that in wild-type extract and was close to the in vivo excision capacity of the latter calculated from the LD 37 (about 10 4 PD per haploid genome). (Auth.)

  15. Chemical scissors cut phosphorene nanostructures

    International Nuclear Information System (INIS)

    Peng, Xihong; Wei, Qun

    2014-01-01

    Phosphorene, a recently fabricated two-dimensional puckered honeycomb structure of phosphorus, showed promising properties for applications in nano-electronics. In this work, we report a chemical scissors effect on phosphorene, using first-principles method. It was found that chemical species, such as H, OH, F, and Cl, can act as scissors to cut phosphorene. Phosphorus nanochains and nanoribbons can be obtained. The scissors effect results from the strong bonding between the chemical species and phosphorus atoms. Other species such as O, S and Se fail to cut phosphorene nanostructures due to their weak bonding with phosphorus. The electronic structures of the produced P-chains reveal that the hydrogenated chain is an insulator while the pristine chain is a one-dimensional Dirac material, in which the charge carriers are massless fermions travelling at an effective speed of light ∼8 × 10 5 m s −1 . The obtained zigzag phosphorene nanoribbons show either metallic or semiconducting behaviors, depending on the treatment of the edge phosphorus atoms. (paper)

  16. The center-cut solution.

    Science.gov (United States)

    Firnstahl, T W

    1993-01-01

    Timothy Firnstahl owns five successful restaurants in Seattle, but he recently came very close to owning none. In the early 1990s, he found himself, like so many restauranteurs, facing rising costs, inefficient management, and a recession. Confronting financial annihilation, Firnstahl had to act quickly: since he had no peripherals to trim, he cut off the head of his company. Remarkably, it worked. Firnstahl's problem was his new and innovative restaurant, Sharps Fresh Roasting. The heart of the Sharps concept was a unique long-roasting technique that made lean, inexpensive meats taste as juicy and delicious as fattier, expensive cuts. The process also lent itself to faster service and lower labor costs. But it wasn't working. Sharps wasn't breaking even, and his other restaurants couldn't make up the difference. He needed a solution fast. Firnstahl got his answer from Mikhail Gorbachev: slash the centralized command and liberate the company. In doing so, he would also transfer virtually all power and responsibility to his line managers. And after five months of intensive study and planning, he accomplished what he set out to do. He fired most of his corporate staff, empowered his restaurant managers with "100% Power and Responsibility," and, finally, undertook a massive promotion campaign. A year later, Sharps Fresh Roasting is the gold mine Firnstahl always believed it could be. He's done away with bureaucracy and turned business around in a down market. All this because his managers are managing themselves.

  17. Global alcohol policy and the alcohol industry.

    Science.gov (United States)

    Anderson, Peter

    2009-05-01

    The WHO is preparing its global strategy on alcohol, and, in so doing, has been asked to consult with the alcohol industry on ways it could contribute in reducing the harm done by alcohol. This review asks which is more effective in reducing harm: the regulatory approaches that the industry does not favour; or the educational approaches that it does favour. The current literature overwhelmingly finds that regulatory approaches (including those that manage the price, availability, and marketing of alcohol) reduce the risk of and the experience of alcohol-related harm, whereas educational approaches (including school-based education and public education campaigns) do not, with industry-funded education actually increasing the risk of harm. The alcohol industry should not be involved in making alcohol policy. Its involvement in implementing policy should be restricted to its role as a producer, distributor, and marketer of alcohol. In particular, the alcohol industry should not be involved in educational programmes, as such involvement could actually lead to an increase in harm.

  18. Density of familial alcoholism and its effects on alcohol use and problems in college students.

    Science.gov (United States)

    Capone, Christy; Wood, Mark D

    2008-08-01

    Previous studies of family history of alcoholism (FHA) in college students have typically relied on dichotomous indices of paternal drinking. This study examined the prevalence of FHA and its effects on alcohol use and problems using a density measure in a sample (n = 408) of college students. Undergraduate students completed an anonymous survey in exchange for course credit. Data was collected between 2005 and 2006. Using a density measure of FHA, we observed an overall prevalence rate of 65.9% and a rate of 29.1% for FHA in both first and second-degree relatives. Structural equation modeling (SEM) was used to investigate relations among FHA, alcohol use/problems and previously identified etiological risk factors for alcohol use disorders (AUD). Results indicated a significant positive association between FHA and alcohol-related problems and this relationship was mediated by age of onset of drinking, behavioral undercontrol and current cigarette use. Behavioral undercontrol also mediated the relationship between gender and alcohol problems. Additionally, FHA was associated with an earlier age of onset of drinking and this was related to greater alcohol use. Assessing density of FHA in future trajectory research may capture a greater number of students at risk for acute alcohol-related problems and/or future development of AUDs. Future preventive interventions with this population, which should begin well before the college years, may benefit from considering personality factors and incorporating smoking cessation to help identify at-risk students and assist those who wish to cut down on their alcohol use but find that smoking acts as a trigger for increased drinking.

  19. ESTHETIC OUTCOME OF SURGICAL EXCISION VERSUS ANTIBIOTIC THERAPY FOR NONTUBERCULOUS MYCOBACTERIAL CERVICOFACIAL LYMPHADENITIS IN CHILDREN

    NARCIS (Netherlands)

    Lindeboom, Jerome A.; Lindeboom, Robert; Bruijnesteijn van Coppenraet, Elisabeth S.; Kuijper, Ed J.; Tuk, Jacco; Prins, Jan M.

    2009-01-01

    One hundred children with microbiologically proven nontuberculous mycobacterial cervicofacial lymphadenitis were randomly assigned to excision of the involved lymph nodes, or antibiotic therapy consisting of clarithromycin and rifabutin. The esthetic outcome was rated using a revised and weighted

  20. Esthetic outcome of surgical excision versus antibiotic therapy for nontuberculous mycobacterial cervicofacial lymphadenitis in children

    NARCIS (Netherlands)

    Lindeboom, J.A.; Lindeboom, R.; Bruijnesteijn van Coppenraet, E.S.; Kuijper, E.J.; Tuk, J.; Prins, J.M.

    2009-01-01

    One hundred children with microbiologically proven nontuberculous mycobacterial cervicofacial lymphadenitis were randomly assigned to excision of the involved lymph nodes, or antibiotic therapy consisting of clarithromycin and rifabutin. The esthetic outcome was rated using a revised and weighted

  1. A Novel Technique of Branchial Fistula Tract Delineation and Excision In Children Allergic To Dyes

    Directory of Open Access Journals (Sweden)

    Swagatam Banerjee

    2015-08-01

    Surgical excision of branchial fistulas in children with allergy to dyes can be challenging. Insertion of a polypropylene thread into the fistula tract makes its subsequent dissection easy with minimal disruption of adjacent structures.

  2. The financial burden of reexcising incompletely excised soft tissue sarcomas: a cost analysis.

    Science.gov (United States)

    Alamanda, Vignesh K; Delisca, Gadini O; Mathis, Shannon L; Archer, Kristin R; Ehrenfeld, Jesse M; Miller, Mark W; Homlar, Kelly C; Halpern, Jennifer L; Schwartz, Herbert S; Holt, Ginger E

    2013-09-01

    Although survival outcomes have been evaluated between those undergoing a planned primary excision and those undergoing a reexcision following an unplanned resection, the financial implications associated with a reexcision have yet to be elucidated. A query for financial data (professional, technical, indirect charges) for soft tissue sarcoma excisions from 2005 to 2008 was performed. A total of 304 patients (200 primary excisions and 104 reexcisions) were identified. Wilcoxon rank sum tests and χ2 or Fisher's exact tests were used to compare differences in demographics and tumor characteristics. Multivariable linear regression analyses were performed with bootstrapping techniques. The average professional charge for a primary excision was $9,694 and $12,896 for a reexcision (pfinancial burden nearly doubles.

  3. Accurate DNA assembly and genome engineering with optimized uracil excision cloning

    DEFF Research Database (Denmark)

    Cavaleiro, Mafalda; Kim, Se Hyeuk; Seppala, Susanna

    2015-01-01

    Simple and reliable DNA editing by uracil excision (a.k.a. USER cloning) has been described by several research groups, but the optimal design of cohesive DNA ends for multigene assembly remains elusive. Here, we use two model constructs based on expression of gfp and a four-gene pathway that pro......Simple and reliable DNA editing by uracil excision (a.k.a. USER cloning) has been described by several research groups, but the optimal design of cohesive DNA ends for multigene assembly remains elusive. Here, we use two model constructs based on expression of gfp and a four-gene pathway...... that produces β-carotene to optimize assembly junctions and the uracil excision protocol. By combining uracil excision cloning with a genomic integration technology, we demonstrate that up to six DNA fragments can be assembled in a one-tube reaction for direct genome integration with high accuracy, greatly...... facilitating the advanced engineering of robust cell factories....

  4. Surgical Excision of Non–Melanoma Skin Cancer in an Elderly Veteran’s Affairs Population

    Directory of Open Access Journals (Sweden)

    C. Malcolm M. Stewart, BS

    2014-12-01

    Conclusions: Although reduction of residual tumor at reexcision is noted with both BCC and even more so with SCC, the rate at which this occurs is not sufficient that a general recommendation to forgo surgical excision can be made.

  5. Orange Peel Excision of Gland: A Novel Surgical Technique for Treatment of Gynecomastia.

    Science.gov (United States)

    S S, Shirol

    2016-12-01

    Gynecomastia is a common aesthetic problem faced by men with reported incidence as high as 65% with serious psychosocial impact. Although various techniques of liposculpture combined with glandular excision is the standard of treatment, many of the glandular excision techniques have inherent limitations and complications such as leaving a long scar, long operative time, contour abnormalities, and increased risk of hematoma. Here, we describe an innovative "the orange peel excision of gland (OPEG) technique" which overcomes these limitations with excellent cosmetic results. A total of 38 breasts were operated in 20 patients (18 bilateral and 2 unilateral). All the patients underwent suction-assisted liposuction and glandular excision under general anesthesia by our OPEG technique. The average operative time per breast was 60 minutes. One patient had a small hematoma which did not require evacuation. The patient satisfaction rate was 95%. The technique has reduced operative time and avoids residual gland and hematoma with excellent aesthetic outcome.

  6. Surgical Excision of Benign Papillomas Diagnosed with Core Biopsy: A Community Hospital Approach

    International Nuclear Information System (INIS)

    Rozentsvayg, Eka; Carver, Kristen; Borkar, Sunita; Mathew, Melvy; Enis, Sean; Friedman, Paul

    2011-01-01

    Our goal was to assess the value of surgical excision of benign papillomas of the breast diagnosed on percutaneous core biopsy by determining the frequency of upgrade to malignancies and high risk lesions on a final surgical pathology. We reviewed 67 patients who had biopsies yielding benign papilloma and underwent subsequent surgical excision. Surgical pathology of the excised lesions was compared with initial core biopsy pathology results. 54 patients had concordant benign core and excisional pathology. Cancer (ductal carcinoma in situ and invasive ductal carcinoma) was diagnosed in five (7%) patients. Surgery revealed high-risk lesions in 8 (12%) patients, including atypical ductal hyperplasia, atypical lobular hyperplasia, and lobular carcinoma in situ. Cancer and high risk lesions accounted for 13 (19%) upstaging events from benign papilloma diagnosis. Our data suggests that surgical excision is warranted with core pathology of benign papilloma

  7. Evaluation of endoscopic laser excision of polypropylene mesh/sutures following anti-incontinence procedures.

    LENUS (Irish Health Repository)

    Davis, N F

    2012-11-01

    We reviewed our experience with and outcome of the largest series to our knowledge of patients who underwent endoscopic laser excision of eroded polypropylene mesh or sutures as a complication of previous anti-incontinence procedures.

  8. Incomplete excision repair process after UV-irradiation in MUT-mutants of Proteus mirabillis

    International Nuclear Information System (INIS)

    Stoerl, K.

    1977-01-01

    MUT-mutants of P. mirabilis seem to be able to perform the incision step in the course of excision repair. In contrast to the corresponding wildtype strains with MUT-mutants the number of single-strand breaks formed after UV-irradiation is independent of the UV-dose up to about 720 erg/mm 2 . Incubation in minimal medium over a longer time does not result in completion of excision repair; about 3-6 single-strand breaks in the DNA of these mutants remain open. Likewise, the low molecular weight of the newly synthesized daughter DNA confirms an incompletely proceeding or delayed repair process. As a possible reason for the mutator phenotype an alteration of the DNA-polymerase playing a role in excision and resynthesis steps of excision repair is discussed. (author)

  9. Endoscopic excision of a lateral ventricular epidermoid—A case report of a novel technique

    Directory of Open Access Journals (Sweden)

    Arjun Shetty

    2014-01-01

    CONCLUSION: A multi portal endoscope that allows use of routine pituitary instruments would enable the surgeon to achieve haemostasis effectively and, in our opinion, should be a viable alternative to microscope for excision of intra ventricular tumours.

  10. Consumo de alcohol alcoholismo

    OpenAIRE

    Rodríguez Páez, Pablo E.; Fundación Valle de Lili

    1999-01-01

    ¿Qué es el alcohol?/¿Cómo actual el alcohol en el organismo?/¿Qué efectos causa?/Efectos por el consumo crónico/¿El consumo de alcohol durante el embarazo afecta el embrión?/¿Qué otras consecuencias tiene el consumo de alcohol?/¿Cuándo se considera que una persona tiene problemas con su consumo de alcohol?/¿Cuándo se debe sospechar que alguien tiene problemas con el consumo de alcohol?/Características del saber beber adecuadamente?/¿Cuales son las alternativas de tratamiento para este problem...

  11. Alcoholic hepatitis.

    Science.gov (United States)

    Damgaard Sandahl, Thomas

    2014-10-01

    Alcoholic hepatitis (AH) is an acute inflammatory syndrome causing significant morbidity and mortality. The prognosis is strongly dependent on disease severity, as assessed by clinical scoring systems. Reliable epidemiological data as well as knowledge of the clinical course of AH are essential for planning and resource allocation within the health care system. Likewise, individual evaluation of risk is desirable in the clinical handling of patients with AH as it can guide treatment, improve patient information, and serve as strata in clinical trials. The present PhD thesis is based on three studies using a cohort of nearly 2000 patients diagnosed with AH in Denmark from 1999 to 2008 as a cohort, in a population-based study design. The aims of this thesis were as follows. (1) To describe the incidence and short- and long-term mortality, of AH in Denmark (Study I). (2) To validate and compare the ability of the currently available prognostic scores to predict mortality in AH (Study II). (3) To investigate the short- and long-term causes of death of patients with AH (Study III). During the study decade, the annual incidence rate in the Danish population rose from 37 to 46 per 106 for men and from 24 to 34 per 106 for women. Both short- and long-term mortality rose for men and women, and the increase in short-term mortality was attributable to increasing patient age and prevalence of cirrhosis. Our evaluation of the most commonly used prognostic scores for predicting the mortality of patients with AH showed that all scores performed similarly, with Area under the Receiver Operator Characteristics curves giving values between 0.74 and 0.78 for 28-day mortality assessed on admission. Our study on causes of death showed that in the short-term (thesis provides novel warranted epidemiological information about AH that shows increasing incidence and mortality rates. Consequently, it reiterates the fact that AH is a life-threatening disease and suggests that AH is an

  12. Harmonisation of Excise Duties on Energy Products and Electricity in Central and Eastern European Countries

    OpenAIRE

    Ma?cu Simona; Burlacu Valentin; Cojocaru Diana

    2013-01-01

    The field of excise duty taxes focuses on the use of these economic instruments designed by the European law in the context of protecting the environment and public health and to establish a prudent and rational utilisation of natural resources. Focusing mainly on deriving and explaining economic impacts of the minimum energy taxes rates corresponding to the EU Directive (2003/96/EC) in CEE countries, this article outlines the degree of harmonisation of excise duty on energy products among th...

  13. Deficiency of gamma-ray excision repair in skin fibroblasts from patients with Fanconi's anemia

    International Nuclear Information System (INIS)

    Remsen, J.F.; Cerutti, P.A.

    1976-01-01

    The capacity of preparations of skin fibroblasts from normal individuals and patients with Fanconi's anemia to excise gamma-ray products of the 5,6-dihydroxydihydrothymine type from exogenous DNA was investigated. The excision capacity of whole-cell homogenates of fibroblasts from two of four patients with Fanconi's anemia was substantially below normal. This repair deficiency was further pronounced in nuclear preparations from cells of the same two patients

  14. A history of the DNA repair and mutagenesis field: The discovery of base excision repair.

    Science.gov (United States)

    Friedberg, Errol C

    2016-01-01

    This article reviews the early history of the discovery of an DNA repair pathway designated as base excision repair (BER), since in contrast to the enzyme-catalyzed removal of damaged bases from DNA as nucleotides [called nucleotide excision repair (NER)], BER involves the removal of damaged or inappropriate bases, such as the presence of uracil instead of thymine, from DNA as free bases. Copyright © 2015. Published by Elsevier B.V.

  15. Management of post-traumatic elbow instability after failed radial head excision: A case report

    OpenAIRE

    Touloupakis, Georgios; Theodorakis, Emmanouil; Favetti, Fabio; Nannerini, Massimiliano

    2017-01-01

    Radial head excision has always been a safe commonly used surgical procedure with a satisfactory clinical outcome for isolated comminuted radial head fractures. However, diagnosis of elbow instability is still very challenging and often underestimated in routine orthopaedic evaluation. We present the case of a 21-years old female treated with excision after radial head fracture, resulting in elbow instability. The patient underwent revision surgery after four weeks. We believe that ligament r...

  16. Is surgical excision necessary for the treatment of Granulomatous lobular mastitis?

    Science.gov (United States)

    Shin, Young Duck; Park, Sung Su; Song, Young Jin; Son, Seung-Myoung; Choi, Young Jin

    2017-07-24

    We aimed to investigate the role of surgical excision in treating granulomatous lobular mastitis. We performed a retrospective chart review of patients with granulomatous lobular mastitis treated from March 2008 to March 2014. We analyzed clinical features and therapeutic modalities and compared the patient outcomes based on treatment. During the study period, a total of 34 patients were diagnosed with granulomatous lobular mastitis and treated. Initial treatments included wide excision (18), oral steroids after incision and drainage (14), and antibiotic therapy (2). The patients receiving only antibiotic therapy showed no improvement after 1 month and wide excision was then performed. Wide excision resulted in nine case of delayed wound healing with fistula. These patients were treated with oral steroids for 1.5-5 months, with subsequent improvement. Overall, 11 out of 20 patients who had underwent wide excision showed improvement without additional treatment. Fourteen patients who had initially received oral steroids for 1 to 6 months (average, 2.8 months) after incision and drainage showed complete remission. During the median follow-up period with 45.5 months (range, 22-98 months), six patients (17.6%) experienced recurrence. Wide excision group experienced recurrence in five (25%) and steroid and drainage group experienced recurrence in one (7.1%). All six recurrences responded to additional steroid therapy for average 3.5 months. Most wide excision group left extensive breast scarring with deformation that was not in steroid and drainage group. Wide excision resulted high recurrence than steroid and drainage group and left extensive scarring. Steroid therapy with or without abscess drainage may be the first choice of treatment for majority cases with granulomatous lobular mastitis.

  17. Pleasure and orgasm in women with Female Genital Mutilation/Cutting (FGM/C).

    Science.gov (United States)

    Catania, Lucrezia; Abdulcadir, Omar; Puppo, Vincenzo; Verde, Jole Baldaro; Abdulcadir, Jasmine; Abdulcadir, Dalmar

    2007-11-01

    Female genital mutilation/cutting (FGM/C) violates human rights. FGM/C women's sexuality is not well known and often it is neglected by gynecologists, urologists, and sexologists. In mutilated/cut women, some fundamental structures for orgasm have not been excised. The aim of this report is to describe and analyze the results of four investigations on sexual functioning in different groups of cut women. semistructured interviews and the Female Sexual Function Index (FSFI). 137 adult women affected by different types of FGM/C; 58 young FGM/C ladies living in the West; 57 infibulated women; 15 infibulated women after the operation of defibulation. The group of 137 women, affected by different types of FGM/C, reported orgasm in almost 86%, always 69.23%; 58 mutilated young women reported orgasm in 91.43%, always 8.57%; after defibulation 14 out of 15 infibulated women reported orgasm; the group of 57 infibulated women investigated with the FSFI questionnaire showed significant differences between group of study and an equivalent group of control in desire, arousal, orgasm, and satisfaction with mean scores higher in the group of mutilated women. No significant differences were observed between the two groups in lubrication and pain. Embryology, anatomy, and physiology of female erectile organs are neglected in specialist textbooks. In infibulated women, some erectile structures fundamental for orgasm have not been excised. Cultural influence can change the perception of pleasure, as well as social acceptance. Every woman has the right to have sexual health and to feel sexual pleasure for full psychophysical well-being of the person. In accordance with other research, the present study reports that FGM/C women can also have the possibility of reaching an orgasm. Therefore, FGM/C women with sexual dysfunctions can and must be cured; they have the right to have an appropriate sexual therapy.

  18. Re-excision rates after breast conserving surgery following the 2014 SSO-ASTRO guidelines.

    Science.gov (United States)

    Heelan Gladden, Alicia A; Sams, Sharon; Gleisner, Ana; Finlayson, Christina; Kounalakis, Nicole; Hosokawa, Patrick; Brown, Regina; Chong, Tae; Mathes, David; Murphy, Colleen

    2017-12-01

    In 2014, SSO-ASTRO published guidelines which recommended "no ink on tumor" as adequate margins for patients undergoing breast conservation for invasive breast cancer. In 2016, new SSO-ASTRO-ASCO guidelines recommended 2 mm margins for DCIS. We evaluated whether these guidelines affected re-excision rates at our institution. Patients treated with breast conservation surgery from January 1, 2010-March 1, 2016 were identified. Re-excision rates, tumor characteristics, and presence of residual disease were recorded. The 2016 guidelines were retrospectively applied to the same cohort and expected re-excision rates calculated. Re-excision rates did not significantly decline before and after 2014 guideline adoption (11.9% before, 10.9% after; p = 0.65) or when the 2016 guidelines were retrospectively applied (8.4%; p = 0.10). The 2014 and 2016 guidelines had minimal impact on our re-excision rates, as most re-excisions were done for DCIS and 2016 guidelines supported our prior institutional practices of 2 mm margins for these patients. Copyright © 2017 Elsevier Inc. All rights reserved.

  19. Three surgical planes identified in laparoscopic complete mesocolic excision for right-sided colon cancer.

    Science.gov (United States)

    Zhu, Da-Jian; Chen, Xiao-Wu; OuYang, Man-Zhao; Lu, Yan

    2016-01-12

    Complete mesocolic excision provides a correct anatomical plane for colon cancer surgery. However, manifestation of the surgical plane during laparoscopic complete mesocolic excision versus in computed tomography images remains to be examined. Patients who underwent laparoscopic complete mesocolic excision for right-sided colon cancer underwent an abdominal computed tomography scan. The spatial relationship of the intraoperative surgical planes were examined, and then computed tomography reconstruction methods were applied. The resulting images were analyzed. In 44 right-sided colon cancer patients, the surgical plane for laparoscopic complete mesocolic excision was found to be composed of three surgical planes that were identified by computed tomography imaging with cross-sectional multiplanar reconstruction, maximum intensity projection, and volume reconstruction. For the operations performed, the mean bleeding volume was 73±32.3 ml and the mean number of harvested lymph nodes was 22±9.7. The follow-up period ranged from 6-40 months (mean 21.2), and only two patients had distant metastases. The laparoscopic complete mesocolic excision surgical plane for right-sided colon cancer is composed of three surgical planes. When these surgical planes were identified, laparoscopic complete mesocolic excision was a safe and effective procedure for the resection of colon cancer.

  20. Women and Alcohol

    Science.gov (United States)

    ... turn JavaScript on. Feature: Rethinking Drinking Women and Alcohol Past Issues / Spring 2014 Table of Contents Women react differently than men to alcohol and face higher risks from it. Pound for ...

  1. Alcohol and Cancer Risk

    Science.gov (United States)

    ... or more than 14 drinks per week for men. What is the evidence that alcohol drinking is a cause of cancer? Based on extensive reviews of research studies , there is a strong scientific consensus of an association between alcohol drinking ...

  2. Genetics of Alcoholism.

    Science.gov (United States)

    Zhu, Ena C; Soundy, Timothy J; Hu, Yueshan

    2017-05-01

    Consuming excessive amounts of alcohol has the potential to modify an individual's brain and lead to alcohol dependence. Alcohol use leads to 88,000 deaths every year in the U.S. alone and can lead to other health issues including cancers, such as colorectal cancer, and mental health problems. While drinking behavior varies due to environmental factors, genetic factors also contribute to the risk of alcoholism. Certain genes affecting alcohol metabolism and neurotransmitters have been found to contribute to or inhibit the risk. Geneenvironment interactions may also play a role in the susceptibility of alcoholism. With a better understanding of the different components that can contribute to alcoholism, more personalized treatment could cater to the individual. This review discusses the major genetic factors and some small variants in other genes that contribute to alcoholism, as well as considers the gene-environmental interactions. Copyright© South Dakota State Medical Association.

  3. Children of alcoholics

    Directory of Open Access Journals (Sweden)

    Robert Oravecz

    2002-09-01

    Full Text Available The author briefly interprets the research – results, referring to the phenomenon of children of alcoholics, especially the psychological and psychopathological characteristics of children of alcoholics in adolescence and young adulthood. The author presents a screening study of adolescents. The sample contains 200 high school students at age 18. The aim of the survey was to discover the relationship between alcohol consumption of parents, PTSD - related psychopathological symptoms and reported life quality of their children. The study confirmed the hypothesis about a substantial correlation between high alcohol consumption of parents, higher psychopathological symptom - expression and lower reported life quality score of their children. Higher PTSD-related symptomatology in children of alcoholics is probably resulted by home violence, which is very often present in family of alcoholics. The article also evaluated the results regarding suicide ideation of children of alcoholics, which is definitely more frequent and more intense than in their peers living in non alcohol – dependent families.

  4. an Unrecorded Alcohol Beverage

    African Journals Online (AJOL)

    NICO

    Chemical analysis of volatile compounds fromkhadi, an unrecorded alcoholic beverage from Botswana, was ... quality, some of them may be contaminated and toxic, thereby ... home-brewed alcoholic beverages exist in Botswana and are.

  5. Fetal Alcohol Spectrum Disorders

    Science.gov (United States)

    Alcohol can harm your baby at any stage during a pregnancy. That includes the earliest stages, before ... can cause a group of conditions called fetal alcohol spectrum disorders (FASDs). Children who are born with ...

  6. Benzyl Alcohol Topical

    Science.gov (United States)

    Benzyl alcohol lotion is used to treat head lice (small insects that attach themselves to the skin) in adults ... children less than 6 months of age. Benzyl alcohol is in a class of medications called pediculicides. ...

  7. What We Fund - Alcohol

    International Development Research Centre (IDRC) Digital Library (Canada)

    NCDP

    Analysis of the regulatory environment (national ... Predicting and evaluating policy impact. PA. N ... constrain the use of a holistic approach engaging ... alcohol, and ultra-processed food and drink industries, ... Alcohol and Other Drugs, 2003.

  8. Alcohol Facts and Statistics

    Science.gov (United States)

    ... Standard Drink? Drinking Levels Defined Alcohol Facts and Statistics Print version Alcohol Use in the United States: ... 1238–1245, 2004. PMID: 15010446 National Center for Statistics and Analysis. 2014 Crash Data Key Findings (Traffic ...

  9. Alcohol use disorder

    Science.gov (United States)

    ... have problems with alcohol if you: Are a young adult under peer pressure Have depression, bipolar disorder , anxiety disorders , or schizophrenia Can easily obtain alcohol Have low self-esteem Have problems with relationships Live a stressful lifestyle ...

  10. New Modelling Strategies For Metal Cutting

    International Nuclear Information System (INIS)

    Rosa, Pedro A. R.; Martins, Paulo A. F.; Atkins, Anthony G.

    2007-01-01

    This paper draws from the 'plasticity and friction only' view of metal cutting to the presentation of new modelling strategies based on the interaction between finite elements and modern ductile fracture mechanics. The overall presentation is supported by specially designed orthogonal metal cutting experiments that were performed on Lead test specimens under laboratory-controlled conditions. Comparisons between theoretical predictions and experimental results comprise a wide range of topics such as material flow, cutting forces and specific cutting pressure. The paper demonstrates that while material flow and chip formation can be successfully modelled by traditional 'plasticity and friction only' analyses, the contribution of the fracture work involved in the formation of new surfaces is essential for obtaining good estimates of cutting forces and of the specific cutting pressure

  11. Laser cutting of sheets for Tailored Blanks

    DEFF Research Database (Denmark)

    Bagger, Claus; Olsen, Flemming Ove

    1999-01-01

    sound welds. Laser cutting the sheets may therefore be an alternative to shear cutting, if the cut kerf squareness can be kept below 0.05 mm.In a number of systematic laboratory experiments the effects of the major process parameters in laser cutting have been investigated. Each cut was quantified...... by the squareness, the surface roughness and the burr height. Mild steel as well as high strength steel with and with out galvanisation with thickness' of 0.7(5) and 1.25 were used.In the tests the difference in cut quality between a 5" and a 7.5" focusing lens were tested and the effect of using pulsed mode laser...

  12. Method of dismantling cylindrical structure by cutting

    International Nuclear Information System (INIS)

    Harada, Minoru; Mitsuo, Kohei; Yokota, Isoya; Nakamura, Kenjiro.

    1989-01-01

    This invention concerns a method of cutting and removing cylindrical structures, for example, iron-reinforced concrete materials such as thermal shielding walls in BWR type power plants into block-like form. That is, in a method of cutting and removing the cylindrical structure from the side of the outer wall, the structural material is cut from above to below successively in the axial direction and the circumferential direction by means abrasive jet by remote operation and cut into blocks each of a predetermined size. The cut out blocks are successively taken out. Cutting of the material from above to below by remote operation and taking out of small blocks causes no hazards to human body. Upon practicing the present invention, it is preferred to use a processing device for slurry and exhaust gases for preventing scattering of activated dismantled pieces or powdery dusts. (K.M.)

  13. Submerged cutting characteristics of abrasive suspension jet

    International Nuclear Information System (INIS)

    Shimizu, Seiji; Peng, Guoyi; Oguma, Yasuyuki; Nishikata, Hiroki

    2015-01-01

    An abrasive suspension jet (ASJ) formed by propelling abrasive suspension through a nozzle has a greater cutting capability than the conventional abrasive water jet. However the cutting capability of submerged ASJs decreases drastically with increasing the standoff distance and the pressure around the jet. A sheathed nozzle nozzle with ventilation for ASJs has been developed as a mean of extending the effective stand-off distance and improving the cutting capabilities under submerged condition. In the present investigation, cutting tests by ASJs in air and under submerged condition are conducted with specimens of aluminum alloy. Air coated ASJs are formed by using a sheathed nozzle with ventilation. The relative cutting depth is defined as the cutting depth is arranged effectually by the cavitation number based on the cavity pressure measured at the sheath. (author)

  14. Craterlike structures on the laser cut surface

    Science.gov (United States)

    Shulyatyev, V. B.; Orishich, A. M.

    2017-10-01

    Analysis of the laser cut surface morphology remain topical. It is related with the fact that the surface roughness is the main index of the cut quality. The present paper deals with the experimental study of the relatively unstudied type of defects on the laser cut surface, dimples, or craters. According to the measurement results, amount of craters per unit of the laser cut surface area rises as the sheet thickness rises. The crater diameter rises together with the sheet thickness and distance from the upper sheet edge. The obtained data permit concluding that the defects like craters are observed predominantly in the case of thick sheets. The results agree with the hypothesis of crater formation as impact structures resulting from the melt drops getting on the cut channel walls upon separation from the cut front by the gas flow.

  15. The effectiveness of tax policy interventions for reducing excessive alcohol consumption and related harms.

    Science.gov (United States)

    Elder, Randy W; Lawrence, Briana; Ferguson, Aneeqah; Naimi, Timothy S; Brewer, Robert D; Chattopadhyay, Sajal K; Toomey, Traci L; Fielding, Jonathan E

    2010-02-01

    A systematic review of the literature to assess the effectiveness of alcohol tax policy interventions for reducing excessive alcohol consumption and related harms was conducted for the Guide to Community Preventive Services (Community Guide). Seventy-two papers or technical reports, which were published prior to July 2005, met specified quality criteria, and included evaluation outcomes relevant to public health (e.g., binge drinking, alcohol-related crash fatalities), were included in the final review. Nearly all studies, including those with different study designs, found that there was an inverse relationship between the tax or price of alcohol and indices of excessive drinking or alcohol-related health outcomes. Among studies restricted to underage populations, most found that increased taxes were also significantly associated with reduced consumption and alcohol-related harms. According to Community Guide rules of evidence, these results constitute strong evidence that raising alcohol excise taxes is an effective strategy for reducing excessive alcohol consumption and related harms. The impact of a potential tax increase is expected to be proportional to its magnitude and to be modified by such factors as disposable income and the demand elasticity for alcohol among various population groups. Published by Elsevier Inc.

  16. Taxing sin and saving lives: Can alcohol taxation reduce female homicides?

    Science.gov (United States)

    Durrance, Christine Piette; Golden, Shelley; Perreira, Krista; Cook, Philip

    2011-07-01

    With costs exceeding $5.8 billion per year, violence against women has significant ramifications for victims, their families, the health care systems that treat them, and the employers who depend on their labor. Prior research has found that alcohol abuse contributes to violence against both men and women, and that stringent alcohol control policies can reduce alcohol consumption and in turn some forms of violence. In this paper, we estimate the direct relationship between an important alcohol control measure, excise taxes, and the most extreme form of violence, homicide. We use female homicide rates as our measure of severe violence, as this measure is consistently and accurately reported across multiple years. Our results provide evidence that increased alcohol taxes reduce alcohol consumption and that reductions in alcohol consumption can reduce femicide. Unfortunately, a direct test of the relationship does not have the power to determine whether alcohol taxes effectively reduce female homicide rates. We conclude that while alcohol taxes have been shown to effectively reduce other forms of violence against women, policy makers may need alternative policy levers to reduce the most severe form of violence against women. Copyright © 2011 Elsevier Ltd. All rights reserved.

  17. Seasonality of alcohol-related phenomena in Estonia

    Science.gov (United States)

    Silm, Siiri; Ahas, Rein

    2005-03-01

    We studied alcohol consumption and its consequences as a seasonal phenomenon in Estonia and analysed the social and environmental factors that may cause its seasonal rhythm. There are two important questions when researching the seasonality of human activities: (1) whether it is caused by natural or social factors, and (2) whether the impact of the factors is direct or indirect. Often the seasonality of social phenomena is caused by social factors, but the triggering mechanisms are related to environmental factors like temperature, precipitation, and radiation via the circannual calendar. The indicators of alcohol consumption in the current paper are grouped as: (1) pre-consumption phenomena, i.e. production, tax and excise, sales (beer, wine and vodka are analysed separately), and (2) post-consumption phenomena, i.e. alcohol-related crime and traffic accidents and the number of people detained in lockups and admitted to alcohol treatment clinics. In addition, seasonal variability in the amount of alcohol advertising has been studied, and a survey has been carried out among 87 students of Tartu University. The analysis shows that different phenomena related to alcohol have a clear seasonal rhythm in Estonia. The peak period of phenomena related to beer is in the summer, from June to August and the low point is during the first months of the year. Beer consumption correlates well with air temperature. The consumption of vodka increases sharply at the end of the year and in June; the production of vodka does not have a significant correlation with negative temperatures. The consumption of wine increases during summer and in December. The consequences of alcohol consumption, expressed as the rate of traffic accidents or the frequency of medical treatment, also show seasonal variability. Seasonal variability of alcohol consumption in Estonia is influenced by natural factors (temperature, humidity, etc.) and by social factors (celebrations, vacations, etc.). However

  18. Incidental intraductal papillomas (breast diagnosed on needle core biopsy do not need to be excised.

    Science.gov (United States)

    Jaffer, Shabnam; Bleiweiss, Ira J; Nagi, Chandandeep

    2013-01-01

    Most authors recommend excision of intraductal papillomas diagnosed on core needle biopsy. This leads to the question of whether or not excision is necessary for incidental intraductal papillomas on core needle biopsy as opposed to those corresponding to imaging findings. Using the pathology computerized data base we retrospectively identified 46 incidental intraductal papillomas diagnosed on core needle biopsy from 1/2000 to 12/2008. Clinical, radiologic, and pathologic information was gathered and correlated. All core needle biopsies were reviewed to confirm the diagnosis of incidental intraductal papillomas, and excision specimens reviewed when available. Of the 46 patients, follow-up information was available in only 38. The age of the patients ranged from 39 to 82 years (mean = 48 years). Most incidental intraductal papillomas were diagnosed by mammotome core needle biopsy (36 cases). A total of 33 cases were performed for calcifications with the following indications: clustered = 21, new = 4, pleomorphic = 3, increasing = 3, indeterminant = 2. The correlating diagnoses included the following: fibrocystic changes with calcium phosphate = 18 or calcium oxalate = 10, fibroadenoma with calcifications = 5. The three masses were: two cases of cystic papillary apocrine metaplasia (I Ultrasound and 1 MRI) and 1 fibroadenoma (Ultrasound). In all cases, the intraductal papillomas were ≤0.2 cm, were not associated with calcifications, and were incidental to them or the underlying mass. A total of 14 patients underwent excision, whereas the remaining 24 have remained radiologically stable for over 12 months. The excision specimen findings were: fibrocystic changes = 8 and intraductal papilloma = 6. With the exception of one case, all the intraductal papilloma remained incidental to imaging findings. In this solitary case, the calcifications were described as pleomorphic and corresponded to fibrocystic changes calcifications on core needle

  19. Ceramic cutting tools materials, development and performance

    CERN Document Server

    Whitney, E Dow

    1994-01-01

    Interest in ceramics as a high speed cutting tool material is based primarily on favorable material properties. As a class of materials, ceramics possess high melting points, excellent hardness and good wear resistance. Unlike most metals, hardness levels in ceramics generally remain high at elevated temperatures which means that cutting tip integrity is relatively unaffected at high cutting speeds. Ceramics are also chemically inert against most workmetals.

  20. CAD for cutting head exchange of roadheader

    Energy Technology Data Exchange (ETDEWEB)

    Tao, Z.; Wu, Z.; Qian, P. [China Coal Research Institute (China). Shanghai Branch

    1999-08-01

    Improving the cutting method according to the actual operating conditions is an effective way to raise production efficiency. A cutting head designed by means of computer and CAD software is characterized by short design cycle but high design quality. Taking the AM-50 road header as an example, this paper shows that it is feasible to design an interchangeable cutting head for the machine without interfering with the main technical parameters. 2 refs., 5 figs., 1 tab.

  1. Alcoholism and Lesbians

    Science.gov (United States)

    Gedro, Julie

    2014-01-01

    This chapter explores the issues involved in the relationship between lesbianism and alcoholism. It examines the constellation of health and related problems created by alcoholism, and it critically interrogates the societal factors that contribute to the disproportionately high rates of alcoholism among lesbians by exploring the antecedents and…

  2. Fuel Class Higher Alcohols

    KAUST Repository

    Sarathy, Mani

    2016-01-01

    This chapter focuses on the production and combustion of alcohol fuels with four or more carbon atoms, which we classify as higher alcohols. It assesses the feasibility of utilizing various C4-C8 alcohols as fuels for internal combustion engines

  3. Institute a modest carbon tax to reduce carbon emissions, finance clean energy technology development, cut taxes, and reduce the deficit

    Energy Technology Data Exchange (ETDEWEB)

    Muro, Mark; Rothwell, Jonathan

    2012-11-15

    The nation should institute a modest carbon tax in order to help clean up the economy and stabilize the nation’s finances. Specifically, Congress and the president should implement a $20 per ton, steadily increasing carbon excise fee that would discourage carbon dioxide emissions while shifting taxation onto pollution, financing energy efficiency (EE) and clean technology development, and providing opportunities to cut taxes or reduce the deficit. The net effect of these policies would be to curb harmful carbon emissions, improve the nation’s balance sheet, and stimulate job-creation and economic renewal.

  4. Changes in Prices After an Excise Tax to Sweetened Sugar Beverages Was Implemented in Mexico: Evidence from Urban Areas.

    Directory of Open Access Journals (Sweden)

    M Arantxa Colchero

    Full Text Available In 2014 an excise tax to non-alcoholic sweetened beverages (SSB was implemented in Mexico. The objective of this paper is to study whether and to what degree these taxes passed-through onto SSB prices in urban areas overall and by region, type of beverage and package size. Prices were obtained from the National Institute of Statistics and Geography from 2011 to 2014. We applied a pre-post quasi-experimental approach using fixed effects models. In sensitivity analysis we applied other model specifications to test the robustness of the findings and we also present weighted estimations based on household purchases. The dependent variables are real prices of a specific beverage category; the main independent variables are dummies for each month of 2014, and the models adjust for time trends and seasonality. Results suggest that the SSB tax passed along to consumers for all SSBs and we found overshifting for the carbonated SSBs. A greater effect is seen among the small package sizes, and we see heterogeneous effects by region. Estimating the effect of the tax on prices is important to understand the potential effect on consumption.

  5. Changes in Prices After an Excise Tax to Sweetened Sugar Beverages Was Implemented in Mexico: Evidence from Urban Areas.

    Science.gov (United States)

    Colchero, M Arantxa; Salgado, Juan Carlos; Unar-Munguía, Mishel; Molina, Mariana; Ng, Shuwen; Rivera-Dommarco, Juan Angel

    2015-01-01

    In 2014 an excise tax to non-alcoholic sweetened beverages (SSB) was implemented in Mexico. The objective of this paper is to study whether and to what degree these taxes passed-through onto SSB prices in urban areas overall and by region, type of beverage and package size. Prices were obtained from the National Institute of Statistics and Geography from 2011 to 2014. We applied a pre-post quasi-experimental approach using fixed effects models. In sensitivity analysis we applied other model specifications to test the robustness of the findings and we also present weighted estimations based on household purchases. The dependent variables are real prices of a specific beverage category; the main independent variables are dummies for each month of 2014, and the models adjust for time trends and seasonality. Results suggest that the SSB tax passed along to consumers for all SSBs and we found overshifting for the carbonated SSBs. A greater effect is seen among the small package sizes, and we see heterogeneous effects by region. Estimating the effect of the tax on prices is important to understand the potential effect on consumption.

  6. Underwater laser cutting of metallic structures

    International Nuclear Information System (INIS)

    Alfille, J.P.; Schildknecht, J.; Ramaswami, V.S.

    1993-01-01

    In the frame of an european contract, the feasibility of the underwater cutting with a CO 2 laser power is studied. The aim of this work is the dismantling metallic structures of reactors pools. The paper analyzes the general concept of the experimental device, the underwater cutting head, the experimenting vessel, examples of cuttings in dismantling situation with a 500 W CO 2 laser, and examples of cuttings with a 5 kW CO 2 laser. (author). 2 refs., 9 figs., 2 tabs

  7. Underwater laser cutting of metal structures

    Energy Technology Data Exchange (ETDEWEB)

    Alfille, J.P.; Prunele, D. de [CEA Centre d`Etudes de Saclay, 91 - Gif-sur-Yvette (France). Direction des Technologies Avancees; Pilot, G. [CEA Centre d`Etudes de Fontenay-aux-Roses, 92 (France). Dept. de Protection de l`Environnement et des Installations; Fredrick, P.; Ramaswami, V.S.; Muys, P. [Radius Engineering, Gent (Belgium)

    1994-12-31

    Cutting tests were carried out on stainless steel (304L) in air and under 7 meters of water (application to reactor pools), using CO{sub 2} and YAG lasers; results concerned cutting speed, quality of cut, cutting thickness. By-products of sectioning operations using a CO{sub 2} laser were studied: dross, aerosols, suspended particles in water, gas analysis, chemical analysis of the aerosols. Same measurements are currently being taken in the case of the YAG laser with beam transported via optical fiber. (from author). 16 figs., 2 tabs., 3 refs.

  8. Underwater laser cutting of metal structures

    International Nuclear Information System (INIS)

    Alfille, J.P.; Prunele, D. de

    1994-01-01

    Cutting tests were carried out on stainless steel (304L) in air and under 7 meters of water (application to reactor pools), using CO 2 and YAG lasers; results concerned cutting speed, quality of cut, cutting thickness. By-products of sectioning operations using a CO 2 laser were studied: dross, aerosols, suspended particles in water, gas analysis, chemical analysis of the aerosols. Same measurements are currently being taken in the case of the YAG laser with beam transported via optical fiber. (from author). 16 figs., 2 tabs., 3 refs

  9. A cutting force model for micromilling applications

    DEFF Research Database (Denmark)

    Bissacco, Giuliano; Hansen, Hans Nørgaard; De Chiffre, Leonardo

    2006-01-01

    In micro milling the maximum uncut chip thickness is often smaller than the cutting edge radius. This paper introduces a new cutting force model for ball nose micro milling that is capable of taking into account the effect of the edge radius.......In micro milling the maximum uncut chip thickness is often smaller than the cutting edge radius. This paper introduces a new cutting force model for ball nose micro milling that is capable of taking into account the effect of the edge radius....

  10. The social costs of alcohol misuse in Estonia.

    Science.gov (United States)

    Saar, Indrek

    2009-01-01

    The aim of this study was to estimate the social costs of alcohol misuse in Estonia in 2006. Using a prevalence-based cost-of-illness approach, both direct and indirect costs were considered, including tangible costs associated with health care, criminal justice, rescue services, damage to property, premature mortality, incarceration, incapability of working due to illnesses, and lower labor productivity. The results show that alcohol misuse cost Estonia more than EUR 200 million in 2006. The costs involved are estimated to represent 1.6% of the gross domestic product (GDP), which is relatively high in comparison with many other countries. In addition, the state receives less receipts from the alcohol excise tax than the costs that it incurs as a consequence of alcohol misuse, which points to the existence of economic inefficiency with respect to the alcohol market. The results of this study suggest that there is definitely a need for further cost-benefit analysis to reach a conclusion regarding the possible utility of government intervention. Copyright 2008 S. Karger AG, Basel.

  11. The spectrum of skin biopsies and excisions in a pediatric skin center.

    Science.gov (United States)

    Theiler, Martin; Neuhaus, Kathrin; Kerl, Katrin; Weibel, Lisa

    2017-12-01

    Little is known about the spectrum of pediatric skin disorders requiring biopsy/excision, their indication, impact on further management, and the accuracy of clinical diagnosis. We aimed to address these questions in the patient population seen at our Swiss University referral center for Pediatric Dermatology and Plastic Surgery. All skin biopsies/excisions performed in patients aged ≤ 16 years over a period of 2 years were retrospectively analyzed. A total of 506 samples were included. The majority of biopsies/excisions (n = 413, 82%) was performed for tumors, cysts, and hamartomas and 18% for other skin conditions. Malignant tumors were found in 12 samples (2%) from four patients. In 121 (24%) patients, the histopathology had an important impact on patient management. In 80 (16%) cases, the pathology did not match with the clinical diagnosis. In 382 (75%) cases, excision was the treatment of choice. Of these, the indication for surgery was based on patient's request in 181 (47%) cases. Surgical interventions for pediatric skin disorders are performed for diagnostic and therapeutic reasons. In this cohort, histopathology was essential for treatment in one quarter of cases. Skin tumors, cysts, and hamartomas often require excision during childhood, with families' request and esthetic considerations playing an important role. What is Known: • The spectrum of pediatric skin conditions has been studied in outpatient, inpatient, and emergency settings. • In contrast, no data exist on the spectrum of pediatric skin disorders undergoing biopsy/excision specifically. What is New: • We analyze biopsies/excisions in children, focusing on diagnosis, indication, and impact on patient management. • Surgical interventions for skin disorders in children are often performed for tumors and hamartomas with esthetic considerations playing a relevant role. If used for diagnostic purposes, they are often performed to confirm or rule out severe skin disease.

  12. The effect of excise tax increases on cigarette prices in South Africa.

    Science.gov (United States)

    Linegar, Daniel J; van Walbeek, Corne

    2018-01-01

    The effectiveness of excise tax increases as a tool for reducing tobacco consumption depends largely on how the tax increases impact the retail price. We estimate this relationship in South Africa for 2001-2015. Statistics South Africa provided disaggregated cigarette price data, used in the calculation of the Consumers' Price Index. Data on the excise tax per cigarette were obtained from Budget Reviews prepared by the National Treasury of South Africa. Regression equations were estimated for each month. The month-on-month change in cigarette prices in February through April was regressed against March's excise tax change to estimate the pass-through coefficient. For the other 9 months, the month-on-month change in cigarette price was regressed against monthly dummy variables to determine the size of the non-tax-related price increase in each of these months. The analysis was performed in both nominal and real (inflation-adjusted) terms. Expressed in real terms, the excise tax was undershifted. A R1.00 (one rand) increase in the excise tax is associated with an increase in the retail price of cigarettes of R0.90 in the pre-2010 period, and R0.49 in the post-2010 period. In the pre-2010 period, the tobacco industry increased the retail price of cigarettes in July/August, independent of the excise tax increase. The discretionary July/August price increases largely disappeared after 2010, primarily because the market became more competitive. The degree of excise tax pass-through, and the magnitude of discretionary increases in cigarette prices, is significantly determined by the competitive environment in the cigarette market. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  13. The effect of excise tax increases on cigarette prices in South Africa

    Science.gov (United States)

    Linegar, Daniel J; van Walbeek, Corne

    2018-01-01

    Introduction The effectiveness of excise tax increases as a tool for reducing tobacco consumption depends largely on how the tax increases impact the retail price. We estimate this relationship in South Africa for 2001–2015. Data Statistics South Africa provided disaggregated cigarette price data, used in the calculation of the Consumers’ Price Index. Data on the excise tax per cigarette were obtained from Budget Reviews prepared by the National Treasury of South Africa. Methods Regression equations were estimated for each month. The month-on-month change in cigarette prices in February through April was regressed against March’s excise tax change to estimate the pass-through coefficient. For the other 9 months, the month-on-month change in cigarette price was regressed against monthly dummy variables to determine the size of the non-tax-related price increase in each of these months. The analysis was performed in both nominal and real (inflation-adjusted) terms. Findings Expressed in real terms, the excise tax was undershifted. A R1.00 (one rand) increase in the excise tax is associated with an increase in the retail price of cigarettes of R0.90 in the pre-2010 period, and R0.49 in the post-2010 period. In the pre-2010 period, the tobacco industry increased the retail price of cigarettes in July/August, independent of the excise tax increase. The discretionary July/August price increases largely disappeared after 2010, primarily because the market became more competitive. Conclusion The degree of excise tax pass-through, and the magnitude of discretionary increases in cigarette prices, is significantly determined by the competitive environment in the cigarette market. PMID:28341767

  14. Technology development for cutting a reactor pressure vessel using a mechanical cutting technique

    International Nuclear Information System (INIS)

    Watanabe, Masaaki; Miyasaka, Yasuhiko; Miyao, Hidehiko; Ooki, Arahiko; Ninomiya, Toshiaki; Koiwai, Masami

    2001-01-01

    On decommissioning of nuclear facilities, the thermal cutting technique such as an oxygen-acetylene gas cutting and a plasma arc cutting are generally used for cutting massive and thick steel structures in consideration with cutting speed and control performance. These techniques generate dust, smoke, aerosol and a large quantity of secondary waste. Mechanical cutting technique has an advantage of small amount of secondary waste, and the metal chips from the kerf recovered easily compared with these thermal cutting technique. The remote mechanical cutting system for highly activated RPV has been developed with the manner which achieves the safety and cost effectiveness. The development has been performed on consignment to RANDEC from the Science and Technology Agency of Japan. (author)

  15. Selection of Near Optimal Laser Cutting Parameters in CO2 Laser Cutting by the Taguchi Method

    Directory of Open Access Journals (Sweden)

    Miloš MADIĆ

    2013-12-01

    Full Text Available Identification of laser cutting conditions that are insensitive to parameter variations and noise is of great importance. This paper demonstrates the application of Taguchi method for optimization of surface roughness in CO2 laser cutting of stainless steel. The laser cutting experiment was planned and conducted according to the Taguchi’s experimental design using the L27 orthogonal array. Four laser cutting parameters such as laser power, cutting speed, assist gas pressure, and focus position were considered in the experiment. Using the analysis of means and analysis of variance, the significant laser cutting parameters were identified, and subsequently the optimal combination of laser cutting parameter levels was determined. The results showed that the cutting speed is the most significant parameter affecting the surface roughness whereas the influence of the assist gas pressure can be neglected. It was observed, however, that interaction effects have predominant influence over the main effects on the surface roughness.

  16. Genetics and alcoholism.

    Science.gov (United States)

    Edenberg, Howard J; Foroud, Tatiana

    2013-08-01

    Alcohol is widely consumed; however, excessive use creates serious physical, psychological and social problems and contributes to the pathogenesis of many diseases. Alcohol use disorders (that is, alcohol dependence and alcohol abuse) are maladaptive patterns of excessive drinking that lead to serious problems. Abundant evidence indicates that alcohol dependence (alcoholism) is a complex genetic disease, with variations in a large number of genes affecting a person's risk of alcoholism. Some of these genes have been identified, including two genes involved in the metabolism of alcohol (ADH1B and ALDH2) that have the strongest known affects on the risk of alcoholism. Studies continue to reveal other genes in which variants affect the risk of alcoholism or related traits, including GABRA2, CHRM2, KCNJ6 and AUTS2. As more variants are analysed and studies are combined for meta-analysis to achieve increased sample sizes, an improved picture of the many genes and pathways that affect the risk of alcoholism will be possible.

  17. On molybdenum (6) alcoholates

    International Nuclear Information System (INIS)

    Turova, N.Ya.; Kessler, V.G.

    1990-01-01

    Synthesis techniques for molybdenum (6) alcoholates of MoO(OR) 4 (1) and MoO 2 (OR) 2 (2) series by means of exchange interaction of corresponding oxychloride with MOR (M=Li, Na) are obtained. These techniques have allowed to prepare 1(R=Me, Et, i-Pr) and 2(R=Me, Et) with 70-98 % yield. Methylates are also prepared at ether interchange of ethylates by methyl alcohol. Metal anode oxidation in corresponding alcohol may be used for 1 synthesis. Physicochemical properties of both series alcoholates, solubility in alcohols in particular, depend on their formation conditions coordination polymerism. Alcoholates of 1 are rather unstable and tend to decomposition up to 2 and ether. It is suggested to introduce NaOR microquantities to stabilize those alcoholates

  18. Alcohol and atherosclerosis

    DEFF Research Database (Denmark)

    Tolstrup, Janne; Grønbaek, Morten

    2007-01-01

    Light to moderate alcohol intake is known to have cardioprotective properties; however, the magnitude of protection depends on other factors and may be confined to some subsets of the population. This review focuses on factors that modify the relationship between alcohol and coronary heart disease...... (CHD). The cardioprotective effect of alcohol seems to be larger among middle-aged and elderly adults than among young adults, who do not have a net beneficial effect of a light to moderate alcohol intake in terms of reduced all-cause mortality. The levels of alcohol at which the risk of CHD is lowest...... and the levels of alcohol at which the risk of CHD exceeds the risk among abstainers are lower for women than for men. The pattern of drinking seems important for the apparent cardioprotective effect of alcohol, and the risk of CHD is generally lower for steady versus binge drinking. Finally, there is some...

  19. AUDIT and AUDIT-C as screening instruments for alcohol problem use in adolescents.

    Science.gov (United States)

    Liskola, Joni; Haravuori, Henna; Lindberg, Nina; Niemelä, Solja; Karlsson, Linnea; Kiviruusu, Olli; Marttunen, Mauri

    2018-07-01

    The Alcohol Use Disorders Identification Test (AUDIT) is commonly used in adults to screen for harmful alcohol consumption but few studies exist on its use among adolescents. Our aim was to validate the AUDIT and its derivative consumption questionnaire (AUDIT-C) as screening instruments for the detection of problem use of alcohol in adolescents. 621 adolescents (age-range, 12-19 years) were drawn from clinical and population samples who completed the AUDIT questionnaire. Psychiatric diagnoses were assessed using K-SADS-PL. A rating based on the K-SADS-PL was used to assess alcohol use habits, alcohol use disorders, screening and symptom criteria questions. Screening performance of the AUDIT and AUDIT-C sum scores and Receiver Operating Characteristic (ROC) curves were calculated. The diagnostic odds ratios (dOR) were calculated to express the overall discrimination between cut-offs. Comparisons of ROC between the AUDIT and AUDIT-C pairs indicated a slightly better test performance by AUDIT for the whole sample and in a proportion of the subsamples. Optimal cut-off value for the AUDIT was ≥5 (sensitivity 0.931, specificity 0.772, dOR 45.22; 95% CI: 24.72-83.57) for detecting alcohol problem use. The corresponding optimal cut-off value for the AUDIT-C was ≥3 in detecting alcohol problem use (sensitivity 0.952, specificity 0.663, dOR 39.31; 95% CI: 19.46-78.97). Agreement between the AUDIT and AUDIT-C using these cut-off scores was high at 91.9%. Our results for the cut-off scores for the early detection of alcohol problem use in adolescents are ≥5 for AUDIT, and ≥3 for AUDIT-C. Copyright © 2018 Elsevier B.V. All rights reserved.

  20. Experimental research on the durability cutting tools for cutting-off steel profiles

    Directory of Open Access Journals (Sweden)

    Cristea Alexandru

    2017-01-01

    Full Text Available The production lines used for manufacturing U-shaped profiles are very complex and they must have high productivity. One of the most important stages of the fabrication process is the cutting-off. This paper presents the experimental research and analysis of the durability of the cutting tools used for cutting-off U-shaped metal steel profiles. The results of this work can be used to predict the durability of the cutting tools.

  1. Machining of Some Difficult-to-Cut Materials with Rotary Cutting Tools

    OpenAIRE

    Stjernstoft, Tero

    2004-01-01

    Automobile and aero industries have an increasing interestin materials with improved mechanical properties. However, manyof these new materials are classified as difficult-to-cut withconventional tools. It is obvious that tools, cutting processesand cutting models has to be devel-oped parallel to materialsscience. In this thesis rotary cutting tools are tested as analternative toexpensive diamond or cubic bore nitridetools. Metal matrix composites mostly consist of a light metalalloy (such as...

  2. Pathogenicity Island Cross Talk Mediated by Recombination Directionality Factors Facilitates Excision from the Chromosome.

    Science.gov (United States)

    Carpenter, Megan R; Rozovsky, Sharon; Boyd, E Fidelma

    2015-12-14

    Pathogenicity islands (PAIs) are mobile integrated genetic elements (MIGEs) that contain a diverse range of virulence factors and are essential in the evolution of pathogenic bacteria. PAIs are widespread among bacteria and integrate into the host genome, commonly at a tRNA locus, via integrase-mediated site-specific recombination. The excision of PAIs is the first step in the horizontal transfer of these elements and is not well understood. In this study, we examined the role of recombination directionality factors (RDFs) and their relationship with integrases in the excision of two PAIs essential for Vibrio cholerae host colonization: Vibrio pathogenicity island 1 (VPI-1) and VPI-2. VPI-1 does not contain an RDF, which allowed us to answer the question of whether RDFs are an absolute requirement for excision. We found that an RDF was required for efficient excision of VPI-2 but not VPI-1 and that RDFs can induce excision of both islands. Expression data revealed that the RDFs act as transcriptional repressors to both VPI-1- and VPI-2-encoded integrases. We demonstrated that the RDFs Vibrio excision factor A (VefA) and VefB bind at the attachment sites (overlapping the int promoter region) of VPI-1 and VPI-2, thus supporting this mode of integrase repression. In addition, V. cholerae RDFs are promiscuous due to their dual functions of promoting excision of both VPI-1 and VPI-2 and acting as negative transcriptional regulators of the integrases. This is the first demonstration of cross talk between PAIs mediated via RDFs which reveals the complex interactions that occur between separately acquired MIGEs. Deciphering the mechanisms of pathogenicity island excision is necessary for understanding the evolution and spread of these elements to their nonpathogenic counterparts. Such mechanistic insight would assist in predicting the mobility of uncharacterized genetic elements. This study identified extensive RDF-mediated cross talk between two nonhomologous VPIs and

  3. Antimicrobial packaging for fresh-cut fruits

    Science.gov (United States)

    Fresh-cut fruits are minimally processed produce which are consumed directly at their fresh stage without any further kill step. Microbiological quality and safety are major challenges to fresh-cut fruits. Antimicrobial packaging is one of the innovative food packaging systems that is able to kill o...

  4. 27 CFR 6.92 - Newspaper cuts.

    Science.gov (United States)

    2010-04-01

    ... OF THE TREASURY LIQUORS âTIED-HOUSEâ Exceptions § 6.92 Newspaper cuts. Newspaper cuts, mats, or engraved blocks for use in retailers' advertisements may be given or sold by an industry member to a retailer selling the industry member's products. [T.D. ATF-364, 60 FR 20423, Apr. 26, 1995] ...

  5. Performance Enhancement of Abrasive Waterjet Cutting

    NARCIS (Netherlands)

    2008-01-01

    Abrasive Waterjet (AWJ) Machining is a recent non-traditional machining process. This technology is widely used in industry for cutting difficult-to-machine-materials, milling slots, polishing hard materials etc. AWJ machining has many advantages, e.g. it can cut net-shape parts, no heat is

  6. Gluebond strength of laser cut wood

    Science.gov (United States)

    Charles W. McMillin; Henry A. Huber

    1985-01-01

    The degree of strength loss when gluing laser cut wood as compared to conventionally sawn wood and the amount of additional surface treatment needed to improve bond quality were assessed under normal furniture plant operating conditions. The strength of laser cut oak glued with polyvinyl acetate adhesive was reduced to 75 percent of sawn joints and gum was reduced 43...

  7. Laser cutting - trends in the development,

    DEFF Research Database (Denmark)

    Olsen, Flemming Ove

    2002-01-01

    Since the laser was invented in 1960, the industrial applications of this tool has grown and grown. And - since the beginning of the 1980'ies, the major industrial application of lasers in production has been laser cutting. In this paper a short review of the development of the laser cutting...

  8. Propagation by Cuttings, Layering and Division

    OpenAIRE

    Relf, Diane; Ball, Elizabeth Carter

    2009-01-01

    The major methods of asexual propagation are cuttings, layering, division, and budding/grafting. Cuttings involve rooting a severed piece of the parent plant; layering involves rooting a part of the parent and then severing it; and budding and grafting are joining two plant parts from different varieties.

  9. Meat Cutting Classes--Popular with Adults

    Science.gov (United States)

    Mostad, James; Carpentier, Dale

    1976-01-01

    Presents a session by session description of a "meats" class, which is offered to high school students (9-week period) and adults (8-week period). The classes cover identification of cuts (beef, sheep, hogs, and veal; grades and grading of live animals and carcasses; economics of butchering and cutting your own meat; actual slaughtering; and the…

  10. Postharvest: Cut flowers and potted plants

    Science.gov (United States)

    In the past fifty years, the cut flower market has changed dramatically, from a local market with growers located on city outskirts, to a global one; flowers and cut foliage sourced from throughout the world are sold as bunches or combined into arrangements and bouquets in the major target markets. ...

  11. Cutting the L3 torque tube

    CERN Multimedia

    Laurent Guiraud

    2001-01-01

    Workers cut the torque tube, with a plasma-cutting device on the L3 experiment, which closed with the LEP accelerator in 2000. L3 was housed in a huge red solenoid, which will be taken over by the ALICE detector when the new LHC is completed.

  12. In the suppression of regge cut contributions

    International Nuclear Information System (INIS)

    Chia, S.P.

    1975-07-01

    It is shown that contributions of reggeon-pomeron cuts are suppressed in amplitudes with opposite natural to the reggeon. This suppression grows logarithmically with energy. The suppression in the πP cut is, however, found to be weak. Consequence on conspiracy is discussed

  13. Development of micro pattern cutting simulation software

    International Nuclear Information System (INIS)

    Lee, Jong Min; Song, Seok Gyun; Choi, Jeong Ju; Novandy, Bondhan; Kim, Su Jin; Lee, Dong Yoon; Nam, Sung Ho; Je, Tae Jin

    2008-01-01

    The micro pattern machining on the surface of wide mold is not easy to be simulated by conventional software. In this paper, a software is developed for micro pattern cutting simulation. The 3d geometry of v-groove, rectangular groove, pyramid and pillar patterns are visualized by c++ and OpenGL library. The micro cutting force is also simulated for each pattern

  14. Cutting Watermelon: Lessons in Instructional Coaching

    Science.gov (United States)

    Sandstead, Martha

    2016-01-01

    Literacy coordinator Martha Sandstead finds inspiration for her coaching work in a quote from civil rights organizer Lawrence Guyot: "Let's say you're riding past a picnic, and people are cuttin' watermelons. You don't immediately go and say, "stop the watermelon cutting" and let's talk. … You cut some watermelons, or you help…

  15. Drilling subsurface wellbores with cutting structures

    Science.gov (United States)

    Mansure, Arthur James; Guimerans, Rosalvina Ramona

    2010-11-30

    A system for forming a wellbore includes a drill tubular. A drill bit is coupled to the drill tubular. One or more cutting structures are coupled to the drill tubular above the drill bit. The cutting structures remove at least a portion of formation that extends into the wellbore formed by the drill bit.

  16. Plasma cutting or laser cutting. Plasma setsudan ka laser setsudan ka

    Energy Technology Data Exchange (ETDEWEB)

    Nakamura, A. (Tanaka Engineering Works Ltd., Saitama (Japan))

    1991-05-01

    Comparisons and discussions were made on the plasma cutting and laser cutting in sheet steel cutting, referring partly to gas cutting. Historically, the cutting has been developed from gas, plasma, and laser in that order, and currently these three methods are used mixedly. Generally, the plasma cutting is superior in cutting speed, but inferior in cut face quality, and it requires measures of dust collection. Due to high accuracy and quality in cut face, the laser cutting has been practically used for quite some time in the thin sheet industry, but medium to thick sheet cutting had a problem of unavailability of high output laser suitable for these ranges. However, the recent technologies have overcome the problem as a result of development at the authors {prime} company of a 2 kW class laser cutter capable of cutting 19 mm thick sheet. The cutter has been proven being particularly excellent in controllability. Choice of whether plasma or laser would depend upon which priority is to be taken, cost or accuracy. 15 figs., 3 tabs.

  17. Laparoscopic complete mesocolic excision via combined medial and cranial approaches for transverse colon cancer.

    Science.gov (United States)

    Mori, Shinichiro; Kita, Yoshiaki; Baba, Kenji; Yanagi, Masayuki; Tanabe, Kan; Uchikado, Yasuto; Kurahara, Hiroshi; Arigami, Takaaki; Uenosono, Yoshikazu; Mataki, Yuko; Okumura, Hiroshi; Nakajo, Akihiro; Maemura, Kosei; Natsugoe, Shoji

    2017-05-01

    To evaluate the safety and feasibility of laparoscopic complete mesocolic excision via combined medial and cranial approaches with three-dimensional visualization around the gastrocolic trunk and middle colic vessels for transverse colon cancer. We evaluated prospectively collected data of 30 consecutive patients who underwent laparoscopic complete mesocolic excision between January 2010 and December 2015, 6 of whom we excluded, leaving 24 for the analysis. We assessed the completeness of excision, operative data, pathological findings, length of large bowel resected, complications, length of hospital stay, and oncological outcomes. Complete mesocolic excision completeness was graded as the mesocolic and intramesocolic planes in 21 and 3 patients, respectively. Eleven, two, eight, and three patients had T1, T2, T3, and T4a tumors, respectively; none had lymph node metastases. A mean of 18.3 lymph nodes was retrieved, and a mean of 5.4 lymph nodes was retrieved around the origin of the MCV. The mean large bowel length was 21.9 cm, operative time 274 min, intraoperative blood loss 41 mL, and length of hospital stay 15 days. There were no intraoperative and two postoperative complications. Our procedure for laparoscopic complete mesocolic excision via combined medial and cranial approaches is safe and feasible for transverse colon cancer.

  18. Circumareolar incision-subdermal tunneling dissection for excision of multiple breast fibroadenomata

    Directory of Open Access Journals (Sweden)

    S O Agodirin

    2017-01-01

    Full Text Available Excision of multiple fibroadenomas (MF in separate breast quadrants presents difficulties of number and location of incision(s and extent of tissue dissection and may be associated with more complications and poorer cosmetic outcome. This is a report of excision of MF in multiple quadrants of the breast using a modification of subcutaneous dissection technique dubbed the circumareolar incision and subdermal tunneling (CAST dissection. After exposure of the superficial fascia with circumareolar incision, subdermal cone-wise dissection was made to allow mobilization of the segment bearing the lump(s. The lump(s were enucleated and removed. MF were removed from four breasts in three young unmarried females. The first patient had multiple adenomas removed from three quadrants of both breasts: 14 on the right and six on the left. The second patient had excision of three lumps in three separate quadrants, and the third patient had excision of two lumps in two separate quadrants. All patients had edema and bruising. One breast had wound infection and dehiscence. There were no skin necrosis, no nipple loss, and no breast distortion. All ensuing scars were camouflaged. CAST dissection was used for excision of MF in multiple quadrants of the breast with preservation of excellent cosmetic outcome of a single circumareolar incision.

  19. Transaxillary Subcutaneouscopic Excision of Fibroadenoma of the Breast in Children: The Covert Scar Approach.

    Science.gov (United States)

    Gonzalez, Mirtha; Pimpalwar, Ashwin

    2016-02-01

    Fibroadenoma is a common condition in adolescent girls. Most tumors are excised either through a periareolar approach or the inframammary approach. Both approaches produce visible scars in adolescent girls. We propose a new cosmetic approach to this lesion and report our experience with the transaxillary subcutaneouscopic approach for excision of the fibroadenoma of the breast. The purpose of this case report is to delineate an innovative surgical approach to resection of a breast fibroadenoma that yields an adequate resection without possible damage to the ductal system while optimizing cosmetic results by avoiding scars. We retrospectively reviewed the medical records of four adolescent girls who underwent the above approach for excision of fibroadenoma of the breast. The age range was 14-16 years. There were no complications in all 4 patients. The final result at the 3-month follow-up revealed an esthetically pleasing skin incision that healed well and was hidden by the natural skin fold of the axilla. Transaxillary subcutaneouscopic excision of fibroadenoma of the breast in children is a safe and effective technique and should be considered for excision of benign breast lesions in children.

  20. The Relationship between Tax Rate, Penalty Rate, Tax Fairness and Excise Duty Non-compliance.

    Directory of Open Access Journals (Sweden)

    Sinnasamy Perabavathi

    2017-01-01

    Full Text Available The rise of indirect tax non-compliance by taxpayers became the main concern of most of the tax authorities around the globe. In Malaysia, non complaince such as smuggling and illegal trade activities by importers involving cigarettes, liquor and imported vehicles bound under Excise Act 1976 have caused revenue losses in monetary and non-monetary aspects. Therefore, the objective of this study is to examine the relationship of tax rate, penalty rate and tax fairness of excise duty non-compliance. This study uses the Deterrence Theory as a basis theory to investigate the phenomenon of excise duty non complaince. A total of 500 excise duty offenders throughout Malaysia responded to the survey. The model was empirically tested by using Partial Least Squares (PLS with disproportionate stratified random sampling technique. The results indicated that the perception of tax rate and penalty rate are positively related while tax fairness is negatively related to excise duty non-compliance among importers.

  1. Autobiographical memory of the recent past following frontal cortex or temporal lobe excisions.

    Science.gov (United States)

    Thaiss, Laila; Petrides, Michael

    2008-08-01

    Previous research has raised questions regarding the necessity of the frontal cortex in autobiographical memory and the role that it plays in actively retrieving contextual information associated with personally relevant events. Autobiographical memory was studied in patients with unilateral excisions restricted to the frontal cortex or temporal lobe involving the amygdalo-hippocampal region and in normal controls using an event-sampling method. We examined accuracy of free recall, use of strategies during retrieval and memory for specific aspects of the autobiographical events, including temporal order. Patients with temporal lobe excisions were impaired in autobiographical recall. By contrast, patients with frontal cortical excisions exhibited normal autobiographical recall but were less likely to use temporal order spontaneously to organize event retrieval. Instruction to organize retrieval by temporal order failed to improve recall in temporal lobe patients and increased the incidence of plausible intrusion errors in left temporal patients. In contrast, patients with frontal cortical excisions now surpassed control subjects in recall of autobiographical events. Furthermore, the retrieval accuracy for the temporal order of diary events was not impaired in these patients. In a subsequent cued recall test, temporal lobe patients were impaired in their memory for the details of the diary events and their context. In conclusion, a basic impairment in autobiographical memory (including memory for temporal context) results from damage to the temporal lobe and not the frontal cortex. Patients with frontal excisions fail to use organizational strategies spontaneously to aid retrieval but can use these effectively if instructed to do so.

  2. Alcohol consumers’ attention to warning labels and brand information on alcohol packaging: Findings from cross-sectional and experimental studies

    Directory of Open Access Journals (Sweden)

    Inge Kersbergen

    2017-01-01

    Full Text Available Abstract Background Alcohol warning labels have a limited effect on drinking behavior, potentially because people devote minimal attention to them. We report findings from two studies in which we measured the extent to which alcohol consumers attend to warning labels on alcohol packaging, and aimed to identify if increased attention to warning labels is associated with motivation to change drinking behavior. Methods Study 1 (N = 60 was an exploratory cross-sectional study in which we used eye-tracking to measure visual attention to brand and health information on alcohol and soda containers. In study 2 (N = 120 we manipulated motivation to reduce drinking using an alcohol brief intervention (vs control intervention and measured heavy drinkers’ attention to branding and warning labels with the same eye-tracking paradigm as in study 1. Then, in a separate task we experimentally manipulated attention by drawing a brightly colored border around health (or brand information before measuring participants’ self-reported drinking intentions for the subsequent week. Results Study 1 showed that participants paid minimal attention to warning labels (7% of viewing time. Participants who were motivated to reduce drinking paid less attention to alcohol branding and alcohol warning labels. Results from study 2 showed that the alcohol brief intervention decreased attention to branding compared to the control condition, but it did not affect attention to warning labels. Furthermore, the experimental manipulation of attention to health or brand information did not influence drinking intentions for the subsequent week. Conclusions Alcohol consumers allocate minimal attention to warning labels on alcohol packaging and even if their attention is directed to these warning labels, this has no impact on their drinking intentions. The lack of attention to warning labels, even among people who actively want to cut down, suggests that there is room for

  3. Alcohol consumers' attention to warning labels and brand information on alcohol packaging: Findings from cross-sectional and experimental studies.

    Science.gov (United States)

    Kersbergen, Inge; Field, Matt

    2017-01-26

    Alcohol warning labels have a limited effect on drinking behavior, potentially because people devote minimal attention to them. We report findings from two studies in which we measured the extent to which alcohol consumers attend to warning labels on alcohol packaging, and aimed to identify if increased attention to warning labels is associated with motivation to change drinking behavior. Study 1 (N = 60) was an exploratory cross-sectional study in which we used eye-tracking to measure visual attention to brand and health information on alcohol and soda containers. In study 2 (N = 120) we manipulated motivation to reduce drinking using an alcohol brief intervention (vs control intervention) and measured heavy drinkers' attention to branding and warning labels with the same eye-tracking paradigm as in study 1. Then, in a separate task we experimentally manipulated attention by drawing a brightly colored border around health (or brand) information before measuring participants' self-reported drinking intentions for the subsequent week. Study 1 showed that participants paid minimal attention to warning labels (7% of viewing time). Participants who were motivated to reduce drinking paid less attention to alcohol branding and alcohol warning labels. Results from study 2 showed that the alcohol brief intervention decreased attention to branding compared to the control condition, but it did not affect attention to warning labels. Furthermore, the experimental manipulation of attention to health or brand information did not influence drinking intentions for the subsequent week. Alcohol consumers allocate minimal attention to warning labels on alcohol packaging and even if their attention is directed to these warning labels, this has no impact on their drinking intentions. The lack of attention to warning labels, even among people who actively want to cut down, suggests that there is room for improvement in the content of health warnings on alcohol packaging.

  4. Electric arc, water jet cutting of metals

    International Nuclear Information System (INIS)

    Bruening, D.

    1991-01-01

    For thermal dismantling and cutting of metallic components, as electric arc, water jet cutting method was developed that can be used for underwater cutting work up to a depth of 20 m. Short-circuiting of a continuously fed electrode wire in contact with the metal generates an electric arc which induces partial melting of the metal, and the water jet surrounding the wire rinses away the molten material, thus making a continuous kerf in the material. The method was also tested and modified to allow larger area, surface cutting and removal of metallic surface coatings. This is achieved by melting parts of the surface with the electric arc and subsequent rinsing by the water jet. The cutting and melting depth for surface removal can be accurately controlled by the operating parameters chosen. (orig./DG) [de

  5. High precision tungsten cutting for optics

    International Nuclear Information System (INIS)

    Reglero, V.; Velasco, T.; Rodrigo, J.; Gasent, L.J.; Alamo, J.; Chato, R.; Ruiz Urien, I.; Santos, I.; Zarauz, J.; Clemente, G.; Sanz-Tudanca, C.; Lopez, J.L.

    2001-01-01

    The results obtained during the INTEGRAL masks development program an implementing the HURA and MURA codes on tungsten plates of different thickness are presented. Hard scientific requirements on pixels size and location tolerances (tenths of microns over large areas -1 m 2 - and thickness from 0.5 mm to 60 mm) required the set up of a dedicated program for testing cutting technologies: laser, photochemical milling, spark machining and electro discharge wire cutting. After a very intensive test campaign the wire cutting process was selected as the optimum technology for code manufacturing . Accuracies achieved an the code cutting fulfill scientific requirements. In fact, they are 5 times better than required. Pixel size and centroids location accuracies of 0.01 mm over a 1 m 2 area have been obtained for the 10,000 pixels on IBIS, 100 pixels on SPI and 24000 pixels on JEM-X masks. Comparative results among different cutting technologies are also discussed. (author)

  6. Effects of Cutting Tool Parameters on Vibration

    Directory of Open Access Journals (Sweden)

    Ince Mehmet Alper

    2016-01-01

    Full Text Available This paper presents of the influence on vibration of Co28Cr6Mo medical alloy machined on a CNC lathe based on cutting parameters (rotational speed, feed rate, depth of cut and tool tip radius. The influences of cutting parameters have been presented in graphical form for understanding. To achieve the minimum vibration, the optimum values obtained for rpm, feed rate, depth of cut and tool tip radius were respectively, 318 rpm, 0.25 mm/rev, 0.9 mm and 0.8 mm. Maximum vibration has been revealed the values obtained for rpm, feed rate, depth of cut and tool tip radius were respectively, 636 rpm, 0.1 mm/rev, 0,5 mm and 0.8 mm.

  7. Thermophysical problems of laser cutting of metals

    Directory of Open Access Journals (Sweden)

    Orishich Anatoliy

    2017-01-01

    Full Text Available Variety and complex interaction of physical processes during laser cutting is a critical characteristic of the laser cutting of metals. Small spatial and temporal scales complicate significantly the experimental investigations of the multi-phase fluid flow in the conditions of laser cutting of metals. In these conditions, the surface formed during the cutting is an indicator determining the melt flow character. The quantitative parameter reflecting the peculiarities of the multi-phase fluid flow, is normally the roughness of the forming surface, and the minimal roughness is the criterion of the qualitative flow [1 – 2]. The purpose of this work is to perform the experimental comparative investigation of the thermophysical pattern of the multi-phase melt flow in the conditions of the laser cutting of metals with the laser wavelength of 10.6 μm and 1.07 μm.

  8. Cutting weeds with a CO2 laser

    DEFF Research Database (Denmark)

    Heisel, T.; Schou, Jørgen; Christensen, S.

    2001-01-01

    Stems of Chenopodium album. and Sinapis arvensis. and leaves of Lolium perenne. were cut with a CO2 laser or with a pair of scissors. Treatments were carried out on greenhouse-grown pot plants at three different growth stages and at two heights. Plant dry matter was measured 2 to 5 weeks after...... treatment. The relationship between dry weight and laser energy was analysed using a non-linear dose-response regression model. The regression parameters differed significantly between the weed species. At all growth stages and heights S. arvensis was more difficult to cut with a CO2 laser than C. album....... When stems were cut below the meristems, 0.9 and 2.3 J mm(-1) of CO2 laser energy dose was sufficient to reduce by 90% the biomass of C. album and S. arvensis respectively. Regrowth appeared when dicotyledonous plant stems were cut above meristems, indicating that it is important to cut close...

  9. Effects of hyperthermia on radiation-induced chromosome breakage and loss in excision repair deficient Drosophila melanogaster

    International Nuclear Information System (INIS)

    Mittler, S.

    1986-01-01

    Hyperthermia increased radiosensitivity with respect to γ-ray induced chromosome loss and breakage in all stages of spermatogenesis in the wild type Oregon R strain of Drosophila melanogaster, whereas hyperthermia increased radiosensitivity to a lesser extent in cn mus(2) 201sup(D1), an excision repair mutant with 0 per cent excision capacity and in mus(3) 308sup(D1), a strain with 24 per cent excision capacity. The differences in hyperthermia-induced radiation sensitivity between the excision repair mutants and the wild strain may be due to the hyperthermia affecting the excision repair mechanism, suggesting that one of the possible mechanisms involved in hyperthermia-increased radiosensitivity is an effect on excision repair. (author)

  10. Alcohol Alert: Link Between Stress and Alcohol

    Science.gov (United States)

    ... patients to better address how stress affects their motivation to drink. Early screening also is vital. For ... C.; Hong, K.A.; et al Enhanced negative emotion and alcohol craving, and altered physiological responses following ...

  11. Alcoholism and Alcohol Abuse - Multiple Languages

    Science.gov (United States)

    ... PDF Strong Family Relationships Can Prevent Alcohol and Drug Use Among Teens - دری (Dari) MP3 Karen Chemical Dependency Taskforce of Minnesota What Is Addiction? - English PDF What Is Addiction? - دری (Dari) PDF ...

  12. Alcohol Advertising and Alcohol Consumption by Adolescents

    OpenAIRE

    Henry Saffer; Dhaval Dave

    2003-01-01

    The purpose of this paper is to empirically estimate the effects of alcohol advertising on adolescent alcohol consumption. The theory of brand capital is used to explain the effects of advertising on consumption. The industry response function and the evidence from prior studies indicate that the empirical strategy should maximize the variance in the advertising data. The approach in this paper to maximizing the variance in advertising data is to employ cross sectional data. The Monitoring th...

  13. A mutant Pfu DNA polymerase designed for advanced uracil-excision DNA engineering.

    Science.gov (United States)

    Nørholm, Morten H H

    2010-03-16

    The combined use of restriction enzymes with PCR has revolutionized molecular cloning, but is inherently restricted by the content of the manipulated DNA sequences. Uracil-excision based cloning is ligase and sequence independent and allows seamless fusion of multiple DNA sequences in simple one-tube reactions, with higher accuracy than overlapping PCR. Here, the addition of a highly efficient DNA polymerase and a low-background-, large-insertion- compatible site-directed mutagenesis protocol is described, largely expanding the versatility of uracil-excision DNA engineering. The different uracil-excision based molecular tools that have been developed in an open-source fashion, constitute a comprehensive, yet simple and inexpensive toolkit for any need in molecular cloning.

  14. Excision repair of 5,6-dihydroxydihydrothymine from the DNA of Micrococcus radiodurans

    International Nuclear Information System (INIS)

    Targovnik, H.S.; Hariharan, P.V.

    1980-01-01

    One of the major ionizing radiation products, 5,6-dihydroxydihydrothymine (thymine glycol), was measured in the DNA of Micrococcus radiodurans following exposure of cells to 6.8-MeV electrons or 254-nm ultraviolet light. Removal of 5,6-dihydroxydihydrothymine was measured in both an ionizing radiation-sensitive strain (262) and a highly radioresistant strain (the wild type W + ) of Micrococcus radiodurans. Within 30 min of incubation (33 0 C) following exposure to ultraviolet light (2400 J/m 2 ) approximately 60% of the thymine glycols were excised, whereas in the case of ionizing radiation (250 krad) only 35% were removed from the cellular DNA of the wild-type strain. In contrast less than 50% of the thymine glycols were excised from the sensitive strain. The amount of DNA degradation induced by radiation was less than 10% in both strains. The results suggest a possible correlation between reduced excision repair of base damage and increased radiation sensitivity

  15. Comparison of the effect of nalidixic acid and thymine deprivation on excision repair in Escherichia coli

    International Nuclear Information System (INIS)

    Masek, F.; Slezarikova, V.; Sedliakova, M.

    1975-01-01

    A difference was found in the extent of inhibition of thymine dimers (TT) excision in ultraviolet (UV) irradiated cells of E. coli after preirradiation depression of protein and DNA syntheses induced by a simultaneous removal of essential amino acids (AA - ) and thymine (T - ) or by the removal of essential amino acids and the addition of nalidixic acid (NAL + ). The difference was observed in both E. coli B/r Hcr + and E. coli K12 SR20 uvr + cells. The depression of DNA synthesis by nalidixic acid as an exogenous agent inhibited TT excision to a lower degree than the depression of DNA synthesis by thymine starvation. The extent of TT excision had no appreciable effect on the restoration of the sedimentation profile of a newly synthesized DNA nor on UV resistance of cells during dark repair. A DNA molecule having the size of a molecule of nonirradiated cells became synthesized while TT were still present in the DNA. (author)

  16. 'Batman excision' of ventral skin in hypospadias repair, clue to aesthetic repair (point of technique).

    Science.gov (United States)

    Hoebeke, P B; De Kuyper, P; Van Laecke, E

    2002-11-01

    In the hypospadiac penis the ventral skin is poorly developed, while dorsal skin is redundant. The classical Byars' flaps are a way to use the excess dorsal skin to cover the penile shaft. The appearance after Byars' flaps however is not natural. We use a more natural looking skin allocation with superior aesthetic results. The clue in this reconstruction is an inverted triangle shaped excision of ventral skin expanding over the edges of the hooded prepuce (which makes it look like Batman). After excision of the ventral skin it is possible to close the penile skin in the midline, thus mimicking the natural raphe. In case of preputial reconstruction the excised ventral skin makes the prepuce look more natural. The trend of further refining aesthetic appearance of the hypospadiac penis often neglects the penile skin reconstruction. A technique is presented by which the total penile appearances after surgery ameliorates due to better skin reconstruction.

  17. The Fanconi anaemia components UBE2T and FANCM are functionally linked to nucleotide excision repair.

    Directory of Open Access Journals (Sweden)

    Ian R Kelsall

    Full Text Available The many proteins that function in the Fanconi anaemia (FA monoubiquitylation pathway initiate replicative DNA crosslink repair. However, it is not clear whether individual FA genes participate in DNA repair pathways other than homologous recombination and translesion bypass. Here we show that avian DT40 cell knockouts of two integral FA genes--UBE2T and FANCM are unexpectedly sensitive to UV-induced DNA damage. Comprehensive genetic dissection experiments indicate that both of these FA genes collaborate to promote nucleotide excision repair rather than translesion bypass to protect cells form UV genotoxicity. Furthermore, UBE2T deficiency impacts on the efficient removal of the UV-induced photolesion cyclobutane pyrimidine dimer. Therefore, this work reveals that the FA pathway shares two components with nucleotide excision repair, intimating not only crosstalk between the two major repair pathways, but also potentially identifying a UBE2T-mediated ubiquitin-signalling response pathway that contributes to nucleotide excision repair.

  18. Conservative treatment of rectal cancer with local excision and postoperative radiation therapy

    International Nuclear Information System (INIS)

    Minsky, B.D.

    1995-01-01

    The conventional surgical treatment for patients with potentially curable transmural and/or node positive rectal cancer is a low anterior resection or abdominoperineal resection. Recently, there has been increasing interest in the use of local excision and postoperative radiation therapy as primary therapy for selected rectal cancers. The limited data suggest that the approach of local excision and postoperative radiation therapy should be limited to patients with either T 1 tumours with adverse pathological factors or T 2 tumours. Transmural tumours, which have a 24% local failure rate, are treated more effectively with standard surgery and pre- or postoperative therapy. The results of local excision and postoperative radiation therapy are encouraging, but more experience is needed to determine if this approach ultimately has similar local control and survival rates as standard surgery. (author)

  19. The influence of altered gravity on carbohydrate metabolism in excised wheat leaves

    Science.gov (United States)

    Obenland, D. M.; Brown, C. S.

    1994-01-01

    We developed a system to study the influence of altered gravity on carbohydrate metabolism in excised wheat leaves by means of clinorotation. The use of excised leaves in our clinostat studies offered a number of advantages over the use of whole plants, most important of which were minimization of exogenous mechanical stress and a greater amount of carbohydrate accumulation during the time of treatment. We found that horizontal clinorotation of excised wheat leaves resulted in significant reductions in the accumulation of fructose, sucrose, starch and fructan relative to control, vertically clinorotated leaves. Photosynthesis, dark respiration and the extractable activities of ADP glucose pyrophosphorylase (EC 2.7.7.27), sucrose phosphate synthase (EC 2.4.4.14), sucrose sucrose fructosyltransferase (EC 2.4.1.99), and fructan hydrolase (EC 3.2.1.80) were unchanged due to altered gravity treatment.

  20. Surgical pathology of excised heart valves in a referral hospital in iran

    International Nuclear Information System (INIS)

    Yaghoubi, A.R.; Raeesi, K.

    2007-01-01

    Assessment of surgical pathology of excised heart valves in a referral hospital in Iran in a five years period. This retrospective descriptive study was done from 2002 to 2005 in Rajaie heart center in Tehran, Iran. Surgery and pathology records of patients who underwent valve replacement or repair surgery were reviewed. Of 1563 patients 738 (47.2%) underwent mitral, 565 (36.1%) aortic, and 215 (14%) multivalve operation. Most common pathology of mitral valve was rheumatic (68%), while degenerative calcific pathology was dominant in aortic valve (52%). Rheumatic involvement was 46%, and degenerative pathology was common in tricuspid and pulmonary valves (50% and 67%, respectively). Time trend analysis shows no significant variation in excised valves pathology or pattern from 2002 to 2005 (p=0.112). Rheumatic pathology in excised heart valves is still common in this referral heart center in Iran, and no obvious change in this pattern was found during a 5 years period. (author)

  1. Adjuvant irradiation improves the outcome of patients with rectal cancer following local excision

    International Nuclear Information System (INIS)

    Chakravarti, Arnab; Willett, Christopher G.; Shellito, Paul; Kaufman, Donald; Daley, William J.

    1997-01-01

    PURPOSE: the long-term outcomes of patients undergoing local excision with or without pelvic irradiation were examined to define the role of adjuvant irradiation following local excision of T1 and T2 rectal cancers. METHODS: From January 1966 to January 1997, 114 patients underwent local excision for rectal cancer. Fifty-nine patients underwent local excision alone, and 55 patients received adjuvant pelvic irradiation (45 Gy to 65.8 Gy)+/-concurrent 5-fluorouracil chemotherapy. Outcome was assessed by treatment, stage, and pathologic features of tumor grade and lymphatic/venous vessel involvement. RESULTS: Of the 114 patients treated by local excision, 90 had T1/T2 tumors. The 5-year actuarial local control (LC) and recurrence-free survival (RFS) of these 90 patients are shown (with numbers of patients at risk at 5 years) in the table below. The 5-year actuarial local control and recurrence-free survival (RFS) for T1/T2 patients treated by local excision alone was 85% and 77%, respectively. The corresponding values for patients undergoing local excision and adjuvant irradiation alone were 88% and 78%, respectively. All 20 patients treated by adjuvant chemoradiation achieved 5-year actuarial local control and had a recurrence-free survival of 88%. The improved outcomes in the adjuvant radiation group become more impressive when the higher T stage distribution of this group is considered. Fifty-five percent of the group receiving adjuvant radiation were stage T2 compared to only 14% of patients treated by local excision alone. Subgroup analysis was performed on those features recognized as poor prognostic factors including poorly differentiated histology and lymphatic vascular invasion. Patients in the local excision alone group with one or more adverse pathologic features had reduced rates of local control compared to those with the absence of such features (38% vs. 91%, respectively, p=0.02). In comparison, the 5 patients with poor prognostic features treated by

  2. Frontal recurrence of medulloblastoma five years after excision and craniospinal irradiation

    Directory of Open Access Journals (Sweden)

    Roka Y

    2009-07-01

    Full Text Available Medulloblastomas were originally classified under gliomas of the cerebellum until Bailey and Cushing in 1925 named these tumors as medulloblastoma. At present these tumors are classified under primitive neuroectodermal tumor. Surgical excision followed by craniospinal irradiation is the treatment of choice. A 13-year-old-girl operated for posterior fossa medulloblastoma 5 years ago presented with history of headache and vomiting on and off for 4 days in late August 2008. The MRI showed left frontal tumor which on excision was reported as medulloblastoma. Even after optimal treatment reports of recurrence abound in literature. The most common location is in the posterior fossa, followed by spinal, supratentorial, and uncommonly, systemic metastases. We conclude that medulloblastomas are highly aggressive tumor with high local recurrences if the initial excision is incomplete and that recurrence in the supratentorial area although uncommon is still a possibility. This mandates regular follow up of these children till adulthood to catch early recurrences and metastatic disease.

  3. Stem Photosynthesis of Twig and Its Contribution to New Organ Development in Cutting Seedlings of Salix Matsudana Koidz.

    Directory of Open Access Journals (Sweden)

    Junxiang Liu

    2018-04-01

    Full Text Available The objective of this study was to illustrate the photosynthetic characteristics of current twigs of Salix matsudana Koidz., and clarify the effect of stem photosynthesis on the new organ development in cutting seedlings. Excised twigs were taken as the experimental samples. The response of the stem photosynthesis rate to increasing light intensity and the effective photochemical efficiency of the cross section of the twig were determined. Then, twigs were used as cuttings and exposed to 0, 20, and 100 μmol m−2 s−1 light intensities, respectively, to achieve distinctive stem photosynthetic rates. After 14 days of treatment, stem water and non-structural carbohydrate (NSC content, as well as the biomass and carbon isotopic composition, of new organs in the cutting seedlings under different light treatments were examined. The results showed that the gross photosynthetic rate significantly increased within 400 μmol m−2 s−1 of light intensity, and the maximum rate was approximately 1.27 μmol m−2 s−1. The effective photochemical efficiency of the PSⅡ of the cortex was significantly higher than the inner tissues in the cross section of the twig. When twig cuttings were exposed to different light intensities, stem water and starch content, as well as bud and root biomass, were significantly higher in the cutting seedling subjected to 100 μmol m−2 s−1 than the case treated in darkness; however, the bud δ13C trend was the opposite. Stem photosynthesis played a positive role in the maintenance of stem water and starch supply for the cutting seedlings, and 13C depleted assimilates produced by stem photosynthesis contributed to bud biomass, revealing that stem photosynthesis promotes organ development in cutting seedlings of Salix matsudana.

  4. 2-cm versus 4-cm surgical excision margins for primary cutaneous melanoma thicker than 2 mm: a randomised, multicentre trial

    DEFF Research Database (Denmark)

    Gillgren, Peter; Drzewiecki, Krzysztof T; Niin, Marianne

    2011-01-01

    Optimum surgical resection margins for patients with clinical stage IIA-C cutaneous melanoma thicker than 2 mm are controversial. The aim of the study was to test whether survival was different for a wide local excision margin of 2 cm compared with a 4-cm excision margin.......Optimum surgical resection margins for patients with clinical stage IIA-C cutaneous melanoma thicker than 2 mm are controversial. The aim of the study was to test whether survival was different for a wide local excision margin of 2 cm compared with a 4-cm excision margin....

  5. Laser cutting or water-jet cutting. Laser setsudan ka water-jet setsudan ka

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, T. (Shibuya Kogyo Co. Ltd., Ishikawa (Japan))

    1991-05-01

    The recent spread of carbon oxide laser cutter is so startlingly fast, but at the same time, water jet cutting using ultra high pressure water stream is drawing attention as it has identical characteristics, and opens the way to cutting materials that have been hitherto difficult to cut. The authors, who are fabricators of cutters of both types, gave the comparisons and explanations on several examples referring to materials that can be cut, cutting accuracy, speed, shape and thermal effects to cut face, and running cost in detail. However, simple comparison is difficult. For instance, cutting 6 mm thick SUS sheet costs a running cost of 65 yen per meter in laser cutting, and 535 yen per meter in water jet cutting, but this situation is often reversed when other material or sheet thickness is selected. The actual situation in the sheet metal processing industry at the present time is that it uses by far more laser processing machines, and uses water jet cutters to supplement for cutting materials more difficult to cut. 10 figs., 3 tabs.

  6. Laser circular cutting of Kevlar sheets: Analysis of thermal stress filed and assessment of cutting geometry

    Science.gov (United States)

    Yilbas, B. S.; Akhtar, S. S.; Karatas, C.

    2017-11-01

    A Kevlar laminate has negative thermal expansion coefficient, which makes it difficult to machine at room temperaures using the conventional cutting tools. Contararily, laser machining of a Kevlar laminate provides advantages over the conventional methods because of the non-mechanical contact between the cutting tool and the workpiece. In the present study, laser circular cutting of Kevlar laminate is considered. The experiment is carried out to examine and evaluate the cutting sections. Temperature and stress fields formed in the cutting section are simulated in line with the experimental study. The influence of hole diameters on temperature and stress fields are investigated incorporating two different hole diameters. It is found that the Kevlar laminate cutting section is free from large size asperities such as large scale sideways burnings and attachemnt of charred residues. The maximum temperature along the cutting circumference remains higher for the large diameter hole than that of the small diameter hole. Temperature decay is sharp around the cutting section in the region where the cutting terminates. This, in turn, results in high temperature gradients and the thermal strain in the cutting region. von Mises stress remains high in the region where temperature gradients are high. von Mises stress follows similar to the trend of temperature decay around the cutting edges.

  7. Experimental improvement of the technology of cutting of high-pressure hoses with metal braid on hand cutting machine

    OpenAIRE

    Karpenko, Mykola; Bogdevicius, Marijonas; Prentkovskis, Olegas

    2016-01-01

    In the article the review of the problem of improvement of technology of high pressure hoses cutting on the hand cutting machines is analyzed. Different methods of cutting of high pressure hoses into the billets are overviewed and the quality of edge cuts of hoses is analyzed. The comparison of treatment on automatic cutting machines and on hand cutting machines is carried out. Different experimental techniques of improvement of the quality of edges cutting of high pressure hoses are prese...

  8. Abscisic Acid Accumulates at Positive Turgor Potential in Excised Soybean Seedling Growing Zones 1

    Science.gov (United States)

    Creelman, Robert A.; Mullet, John E.

    1991-01-01

    Abscisic acid (ABA) accumulated in soybean (Glycine max [L.] Merr. cv Williams) hypocotyl elongating regions when seedlings were transferred to low water potential vermiculite (Ψ = −0.3 megapascals) even though positive turgor is retained in this tissue. Accumulation of ABA in growing zones could occur from de novo biosynthesis within this tissue or transport from adjacent nongrowing zones. Both growing and nongrowing hypocotyl and root tissues accumulated significant levels of ABA when excised and dehydrated to reduce turgor. Surprisingly, excised growing zones (which experienced no water loss) also accumulated ABA when incubated in darkness for 4 hours at 100% relative humidity and 29°C. Induction of ABA accumulation in the excised elongating region of the hypocotyl was not caused by disruption of root pressure or wounding. While excision of hypocotyl elongating regions induced ABA accumulation, no change in either extensin or p33 mRNA levels was observed. Accumulation of extensin or p33 mRNA required more severe wounding. This suggests that ABA is not involved in the response of these genes in wounded tissue and that wound signals are not causing ABA accumulation in excised tissue. Accumulation of ABA in excised elongating regions was correlated with growth inhibition and a decline in turgor to the yield threshold (Ψ;p = 0.37 megapascals; R Matyssek, S Maruyama, JS Boyer [1988] Plant Physiol 86: 1163-1167). Inhibiting hypocotyl growth by transferring seedlings to lower temperatures or light did not cause ABA accumulation. We conclude that induction of ABA accumulation in growing zones is more sensitive to changes in turgor than the induction which occurs in mature tissues. Images Figure 2 PMID:16668113

  9. Union women, the tobacco industry, and excise taxes: a lesson in unintended consequences.

    Science.gov (United States)

    Balbach, Edith D; Campbell, Richard B

    2009-08-01

    Between 1987 and 1997, the tobacco industry used the issue of cigarette excise tax increases to create a political partnership with the Coalition of Labor Union Women (CLUW), a group representing female trade unionists in the U.S. This paper documents how the industry created this relationship and the lessons tobacco-control advocates can learn from the industry's example, in order to mitigate possible unintended consequences of advocating excise tax increases. In 1998, under the terms of the Master Settlement Agreement, the tobacco industry began making documents produced in litigation available publicly. Currently, approximately 50 million pages are available online, including substantial documentation of the industry-CLUW relationship. For this study, a comprehensive search of these documents was conducted. The tobacco industry encouraged CLUW's opposition to excise tax increases by emphasizing the economic regressivity of these taxes, discussing excise taxes generically to deflect attention from cigarettes, and encouraging opposition to earmarking cigarette taxes to pay for specific programs. In addition, CLUW received at least $221,500 in financial support between 1987 and 1997 and in-kind support for its conferences, membership materials, and other services. Excise tax increases, if pursued without considering the impacts they may have on low-SES populations, may have unintended consequences. In this case, such proposals may have helped to create a relationship between CLUW and the tobacco industry. Because excise taxes are endorsed in the Framework Convention on Tobacco Control, tobacco-control advocates must understand how to build relationships with low-SES populations and mitigate potential alliances with the tobacco industry.

  10. Awake craniotomy for excision of arteriovenous malformations? A qualitative comparison study with stereotactic radiosurgery.

    Science.gov (United States)

    Chan, David Yuen Chung; Chan, Danny Tat Ming; Zhu, Cannon Xian Lun; Kan, Patricia Kwok Yee; Ng, Amelia Yikjin; Hsieh, Yi-Pin Sonia; Abrigo, Jill; Poon, Wai Sang; Wong, George Kwok Chu

    2018-05-01

    Treatment of arteriovenous malformations (AVM) located at the eloquent area has been a challenge. Awake brain mapping allows identification of a non-eloquent gyrus for intervention and can potentially facilitate resection with preservation of functions. An alternative treatment option is stereotactic radiosurgery (SRS). The objective of this study was to perform a qualitative comparison of the treatment outcome of awake AVM excision versus SRS. We conducted a 13-year retrospective review of AVM excision under awake craniotomy performed at Prince of Wales Hospital, Hong Kong, from 2003 to 2016. Patients' presentation, Spetzler-Martin (SM) grading, rate of obliteration and complication were reviewed and analyzed with the modified radiosurgery-based AVM score (RS score). Six patients had excision of AVM under awake mapping during this period of time. Two were SM Grade II and four were SM Grade III. Five located at the peri-rolandic region while one at the temporal language area. None had failed mapping. Five out of six achieved complete obliteration (83.3%). Qualitative comparative analysis had revealed better treatment outcome with awake AVM excision as compared to SRS with the obliteration rate of 100% versus 96% for RS score ≤1.00, 100% versus 78% for RS score 1.01-1.50, and 66% versus 50% for RS score >2.00 respectively. In conclusion, awake mapping and excision of AVMs at the eloquent area is feasible. Qualitative comparative analysis had revealed higher obliteration rate with awake AVM excision as compared to SRS. Copyright © 2018 Elsevier Ltd. All rights reserved.

  11. Abscisic Acid accumulates at positive turgor potential in excised soybean seedling growing zones.

    Science.gov (United States)

    Creelman, R A; Mullet, J E

    1991-04-01

    Abscisic acid (ABA) accumulated in soybean (Glycine max [L.] Merr. cv Williams) hypocotyl elongating regions when seedlings were transferred to low water potential vermiculite (Psi = -0.3 megapascals) even though positive turgor is retained in this tissue. Accumulation of ABA in growing zones could occur from de novo biosynthesis within this tissue or transport from adjacent nongrowing zones. Both growing and nongrowing hypocotyl and root tissues accumulated significant levels of ABA when excised and dehydrated to reduce turgor. Surprisingly, excised growing zones (which experienced no water loss) also accumulated ABA when incubated in darkness for 4 hours at 100% relative humidity and 29 degrees C. Induction of ABA accumulation in the excised elongating region of the hypocotyl was not caused by disruption of root pressure or wounding. While excision of hypocotyl elongating regions induced ABA accumulation, no change in either extensin or p33 mRNA levels was observed. Accumulation of extensin or p33 mRNA required more severe wounding. This suggests that ABA is not involved in the response of these genes in wounded tissue and that wound signals are not causing ABA accumulation in excised tissue. Accumulation of ABA in excised elongating regions was correlated with growth inhibition and a decline in turgor to the yield threshold (Psi;(p) = 0.37 megapascals; R Matyssek, S Maruyama, JS Boyer [1988] Plant Physiol 86: 1163-1167). Inhibiting hypocotyl growth by transferring seedlings to lower temperatures or light did not cause ABA accumulation. We conclude that induction of ABA accumulation in growing zones is more sensitive to changes in turgor than the induction which occurs in mature tissues.

  12. Alcohol tax pass-through across the product and price range: do retailers treat cheap alcohol differently?

    Science.gov (United States)

    Ally, Abdallah K; Meng, Yang; Chakraborty, Ratula; Dobson, Paul W; Seaton, Jonathan S; Holmes, John; Angus, Colin; Guo, Yelan; Hill-McManus, Daniel; Brennan, Alan; Meier, Petra S

    2014-12-01

    Effective use of alcohol duty to reduce consumption and harm depends partly on retailers passing duty increases on to consumers via price increases, also known as 'pass-through'. The aim of this analysis is to provide evidence of UK excise duty and sales tax (VAT) pass-through rates for alcohol products at different price points. March 2008 to August 2011, United Kingdom. Panel data quantile regression estimating the effects of three duty changes, two VAT changes and one combined duty and VAT change on UK alcohol prices, using product-level supermarket price data for 254 alcohol products available weekly. Products were analysed in four categories: beers, ciders/ready to drink (RTDs), spirits and wines. Within all four categories there exists considerable heterogeneity in the level of duty pass-through for cheaper versus expensive products. Price increases for the cheapest 15% of products fall below duty rises (undershifting), while products sold above the median price are overshifted (price increases are higher than duty increases). The level of undershifting is greatest for beer [0.85 (0.79, 0.92)] and spirits [0.86 (0.83, 0.89)]. Undershifting affects approximately 67% of total beer sales and 38% of total spirits sales. Alcohol retailers in the United Kingdom appear to respond to increases in alcohol tax by undershifting their cheaper products (raising prices below the level of the tax increase) and overshifting their more expensive products (raising prices beyond the level of the tax increase). This is likely to impact negatively on tax policy effectiveness, because high-risk groups favour cheaper alcohol and undershifting is likely to produce smaller consumption reductions. © 2014 Society for the Study of Addiction.

  13. Restraining and neck cutting or stunning and neck cutting of veal calves.

    Science.gov (United States)

    Lambooij, E; van der Werf, J T N; Reimert, H G M; Hindle, V A

    2012-05-01

    Brain and heart activities were measured in 31 veal calves during restraining and rotating followed by neck cutting with or without stunning to evaluate welfare. After neck cutting correlation dimension analyses and %power of EEG beta wave fraction decreased gradually to lower values resulting in an induction of unconsciousness lasting on average 80s. Corneal reflex response ceased 135±57s after neck cutting. The CD scores and the %power of beta waves fell immediately after post-cut captive bolt and pre-cut electrical stunning to levels indicating unconsciousness. Heart rate in lairage increased upon entrance to the restrainer and again after rotation, heart rate variability decreased. Rotating the restrainer 90°, 120° or 180° compromised veal calf welfare and should be avoided. It is recommended to use post-cut captive bolt stunning or pre-cut electrical stunning inducing immediate unconsciousness. Copyright © 2011 Elsevier Ltd. All rights reserved.

  14. International feedback experience on the cutting of reactor internal components

    International Nuclear Information System (INIS)

    Boucau, J.

    2014-01-01

    Westinghouse capitalizes more than 30 years of experience in the cutting of internal components of reactor and their packaging in view of their storage. Westinghouse has developed and validated different methods for cutting: plasma torch cutting, high pressure abrasive water jet cutting, electric discharge cutting and mechanical cutting. A long feedback experience has enabled Westinghouse to list the pros and cons of each cutting technology. The plasma torch cutting is fast but rises dosimetry concerns linked to the control of the cuttings and the clarity of water. Abrasive water jet cutting requires the installation of costly safety devices and of an equipment for filtering water but this technology allows accurate cuttings in hard-to-reach zones. Mechanical cutting is the most favourable technology in terms of wastes generation and of the clarity of water but the cutting speed is low. (A.C.)

  15. Alcohol and atherosclerosis

    Directory of Open Access Journals (Sweden)

    Murilo Foppa

    2001-02-01

    Full Text Available Observational studies have attributed a protective effect to alcohol consumption on the development of atherosclerosis and cardiovascular morbidity and mortality. Alcohol intake in the amount of one to two drinks per day results in an estimated 20-40% reduction in cardiovascular events. An additional protective effect, according to major cohort studies, has been attributed to wine, probably due to antioxidant effects and platelet antiaggregation agents. On the other hand, the influence of different patterns of alcohol consumption and environmental factors may explain a great part of the additional effect of wine. Protection may be mediated by modulation of other risk factors, because alcohol increases HDL-C, produces a biphasic response on blood pressure, and modulates the endothelial function, while it neither increases body weight nor impairs glucose-insulin homeostasis. Alcohol may also have a direct effect on atherogenesis. Despite these favorable effects, the current evidence is not enough to justify prescribing alcohol to prevent cardiovascular disease.

  16. Alcohol, aggression, and violence

    Directory of Open Access Journals (Sweden)

    Darja Škrila

    2005-09-01

    Full Text Available Background: The association between alcohol and aggression has long been recognized, but the systematic research to understand the causal basis for this relationship and the processes that underlie it has only been undertaken in the past 25 years. In the article the most important mechanisms, by which alcohol affects behavior, are explained. Aggression in persons with alcohol dependence and the connection between antisocial (dissocial personality disorder, alcohol and aggression are described. In addition different forms of aggression or violence, that have been committed under the influence of alcohol, such as inter-partner violence, sexual assault, child abuse, crime and traffic accidents are described.Conclusions: The research findings can be used in the prevention and treatment of alcohol-related aggression.

  17. Alcohol in moderation

    DEFF Research Database (Denmark)

    Mueller, Simone; Lockshin, Larry; Louviere, Jordan J.

    2011-01-01

    products identified, which are jointly purchased with low alcohol wines. The effect of a tax increase on substitution patterns between alcoholic beverages is examined. Methodology: In a discrete choice experiment, based on their last purchase, consumers select one or several different alcoholic beverages......Purpose: The study examines the market potential for low and very low alcohol wine products under two different tax regimes. The penetration and market share of low alcohol wine are estimated under both tax conditions. Consumers’ alcoholic beverage purchase portfolios are analysed and those...... into a purchase basket. An experimental design controlled the beverages’ price variation. Applying an intra-individual research design, respondents’ purchases were simulated under current and increased taxes. Findings: A market potential for low and very low wine products of up to ten percent of the wine market...

  18. Excision of thymine dimers from specifically incised DNA by extracts of xeroderma pigmentosum cells

    Energy Technology Data Exchange (ETDEWEB)

    Cook, K; Friedberg, E C; Slor, H; Cleaver, J E

    1975-07-17

    DNA repair defects as exhibited in fibroblasts from patients with xeroderma pigmentosa were studied. Five complementation groups for excision-repair defects were examined to test the hypothesis that a defective endonuclease or exonuclease may be the cause. No evidence was found to indicate that the enzyme activity functions in dimer excision. Since ultraviolet irradiated E. coli DNA incised with an endonuclease purified from phage-infected cells were used, it is possible that other factors may be involved in human UV endonuclease action. (JWP)

  19. [Transanal total mesorectal excision for rectal cancer - just a fashion trend?].

    Science.gov (United States)

    Kala, Z; Skrovina, M; Procházka, V; Grolich, T; Klos, K

    2014-12-01

    Transanal total mesorectal excision performed using equipment for transanal minimally invasive surgery is an innovative surgical technique introduced to facilitate this procedure and to reach better oncosurgical outcomes in patients with low rectal cancer. This article presents a brief summary of guidelines for treatment of patients with low rectal carcinoma. Up-to-date information about the principles of this new method, its modifications and contemporary indications is presented. Based on their own experience and literature resources, the authors inform about the advantages, limitations and unresolved issues of minimally invasive transanal mesorectal excision.

  20. Management of post-traumatic elbow instability after failed radial head excision: A case report

    Directory of Open Access Journals (Sweden)

    Georgios Touloupakis

    2017-02-01

    Full Text Available Radial head excision has always been a safe commonly used surgical procedure with a satisfactory clinical outcome for isolated comminuted radial head fractures. However, diagnosis of elbow instability is still very challenging and often underestimated in routine orthopaedic evaluation. We present the case of a 21-years old female treated with excision after radial head fracture, resulting in elbow instability. The patient underwent revision surgery after four weeks. We believe that ligament reconstruction without radial head substitution is a safe alternative choice for Mason III radial head fractures accompanied by complex ligament lesions.